Energy Technology Data Exchange (ETDEWEB)
Caldas, Ibere L.; Heller, M.V.A.P.; Brasilio, Z.A. [Sao Paulo Univ., SP, RJ (Brazil). Inst. de Fisica
1997-12-31
Full text. In this work we summarize the results from experiments on electrostatic and magnetic fluctuations in tokamak plasmas. Spectral analyses show that these fluctuations are turbulent, having a broad spectrum of wavectors and a broad spectrum of frequencies at each wavector. The electrostatic turbulence induces unexpected anomalous particle transport that deteriorates the plasma confinement. The relationship of these fluctuations to the current state of plasma theory is still unclear. Furthermore, we describe also attempts to control this plasma turbulence with external magnetic perturbations that create chaotic magnetic configurations. Accordingly, the magnetic field lines may become chaotic and then induce a Lagrangian diffusion. Moreover, to discuss nonlinear coupling and intermittency, we present results obtained by using numerical techniques as bi spectral and wavelet analyses. (author)
Edge plasma diagnostics on Tore Supra tokamak
International Nuclear Information System (INIS)
Fujita, Junji
1991-01-01
From 1988 to 1991, the international scientific research 'Diagnosis of peripheral plasma in Tore Supra tokamak' was carried out as a three-year plan receiving the support of the scientific research expense of the Ministry of Education. This is to apply the method of measuring electron density distribution by neutral lithium beam probe spectroscopy to the measurement of the electron density distribution in the peripheral plasma in Tore Supra Tokamak in France. Among many tokamaks in operation doing respective characteristics researches, the Tore Supra generates the toroidal magnetic field by using superconducting coils, and aims at the long time discharge for 30 sec. for the time being, and for 300 sec. in future. In the plasma generators for long time discharge like this, the technology of particle control is a large problem. For this purpose, a divertor was added to the Tore Supra. In order to advance the research on particle control, it is necessary to examine the behavior of plasma in the peripheral part in detail. The measurement of peripheral plasma in tokamaks, beam probe spectroscopy, the Tore Supra tokamak, the progress of the joint research, the problems in the joint research and the perspective of hereafter are reported. (K.I.)
Plasma boundary phenomena in tokamaks
International Nuclear Information System (INIS)
Stangeby, P.C.
1989-06-01
The focus of this review is on processes occurring at the edge, and on the connection between boundary plasma - the scrape-off layer (SOL) and the radiating layer - and central plasma processes. Techniques used for edge diagnosis are reviewed and basic experimental information (n e and T e ) is summarized. Simple models of the SOL are summarized, and the most important effects of the boundary plasma - the influence on the fuel particles, impurities, and energy - on tokamak operation dealt with. Methods of manipulating and controlling edge conditions in tokamaks and the experimental data base for the edge during auxiliary heating of tokamaks are reviewed. Fluctuations and asymmetries at the edge are also covered. (9 tabs., 134 figs., 879 refs.)
Presheath profiles in simulated tokamak edge plasmas
International Nuclear Information System (INIS)
LaBombard, B.; Conn, R.W.; Hirooka, Y.; Lehmer, R.; Leung, W.K.; Nygren, R.E.; Ra, Y.; Tynan, G.
1988-04-01
The PISCES plasma surface interaction facility at UCLA generates plasmas with characteristics similar to those found in the edge plasmas of tokamaks. Steady state magnetized plasmas produced by this device are used to study plasma-wall interaction phenomena which are relevant to tokamak devices. We report here progress on some detailed investigations of the presheath region that extends from a wall surface into these /open quotes/simulated tokamak/close quotes/ edge plasma discharges along magnetic field lines
Plasma detachment in divertor tokamaks
Leonard, A. W.
2018-04-01
Observations of divertor plasma detachment in tokamaks are reviewed. Plasma detachment is characterized in terms of transport and dissipation of power, momentum and particle flux along the open field lines from the midplane to the divertor. Asymmetries in detachment onset and other characteristics between the inboard and outboard divertor plasmas is found to be primarily driven by plasma E× B drifts. The effect of divertor plate geometry and magnetic configuration on divertor detachment is summarized. Control of divertor detachment has progressed with a development of a number of diagnostics to characterize the detached state in real-time. Finally the compatibility of detached divertor operation with high performance core plasmas is examined.
ECRH Studies on Tokamak Plasmas.
1980-10-10
r.I*cru.Dtrtibution uUnliited 300 Unicorn Pork Drive Woburn, Massachusetts 04801 ECRH STUDIES ON TOKAMAK PLASMAS JAYCOR Project No. 6183 Final Report...wavelength polariza- tion field produced by the curvature and field gradient drifts [15]. The growth rate is y = Vs[k/R 2 = [T(eV)/X(cm)J 2 3.3 x 105 sec
Relaxed states of tokamak plasmas
International Nuclear Information System (INIS)
Kucinski, M.Y.; Okano, V.
1993-01-01
The relaxed states of tokamak plasmas are studied. It is assumed that the plasma relaxes to a quasi-steady state which is characterized by a minimum entropy production rate, compatible with a number of prescribed conditions and pressure balance. A poloidal current arises naturally due to the anisotropic resistivity. The minimum entropy production theory is applied, assuming the pressure equilibrium as fundamental constraint on the final state. (L.C.J.A.)
Edge plasma physical investigations of tokamak plasmas in CRIP
International Nuclear Information System (INIS)
Bakos, J.; Ignacz, P.; Koltai, L.; Paszti, F.; Petravich, G.; Szigeti, J.; Zoletnik, S.
1988-01-01
The results of the measurements performed in the field of thermonuclear high temperature plasma physics in CRIP (Hungary) are summarized. In the field of the edge plasma physics solid probes were used to test the external zone of plasma edges, and atom beams and balls were used to investigate both the external and internal zones. The plasma density distribution was measured by laser blow-off technics, using Na atoms, which are evaporated by laser pulses. The excitation of Na atom ball by tokamak plasma gives information on the status of the plasma edge. The toroidal asymmetry of particle transport in tokamak plasma was measured by erosion probes. The evaporated and transported impurities were collected on an other part of the plasma edge and were analyzed by SIMS and Rutherford backscattering. The interactions in plasma near the limiter were investigated by a special limiter with implemented probes. Recycling and charge exchange processes were measured. Disruption phenomena of tokamak plasma were analyzed and a special kind of disruptions, 'soft disruptions' and the related preliminary perturbations were discovered. (D.Gy.) 10 figs
PLASMA EQUILIBRIUM IN TOKAMAKS
de Blank, H. J.
2010-01-01
This lecture treats the magnetohydrodynamic (MHD) equilibrium of axisymmetric plasmas, as given by the Grad-Shafranov equation. In a brief introduction, equilibrium parameters such as the q-profile, the internal inductance, and the poloidal beta are introduced. The properties of these quantities
Plasma equilibrium in tokamaks
de Blank, H. J.
2008-01-01
This lecture treats the magnetohydrodynamic (MHD) equilibrium of axisymmetric plasmas, as given by the Grad-Shafranov equation. In a brief introduction, equilibrium parameters such as the q-profile, the internal inductance, and the poloidal beta are introduced. The properties of these quantities
Plasma equilibrium in tokamaks
de Blank, H. J.
2012-01-01
This lecture treats the magnetohydrodynamic (MHD) equilibrium of axisymmetric plasmas, as given by the Grad-Shafranov equation. In a brief introduction, equilibrium parameters such as the q-profile, the internal inductance, and the poloidal beta are introduced. The properties of these quantities
Tokamak plasma position dynamics and feedback control
International Nuclear Information System (INIS)
Burenko, L.; Bailey, J.M.
1983-01-01
The perturbation equations of a tokamak plasma equilibrium position are developed. Solution of the approximated perturbation equations is carried out. A unique, simple, and useful plasma displacement dynamics transfer function of a tokamak is developed. The dominant time constants of the dynamics transfer function are determined in a symbolic form
Stability analysis of tokamak plasmas
International Nuclear Information System (INIS)
Bourdelle, C.
2000-10-01
In a tokamak plasma, the energy transport is mainly turbulent. In order to increase the fusion reactions rate, it is needed to improve the energy confinement. The present work is dedicated to the identification of the key parameters leading to plasmas with a better confined energy in order to guide the future experiments. For this purpose, a numerical code has been developed. It calculates the growth rates characterizing the instabilities onset. The stability analysis is completed by the evaluation of the shearing rate of the rotation due to the radial electric field. When this shearing rate is greater than the growth rate the ion turbulence is fully stabilised. The shearing rate and the growth rate are determined from the density, temperature and security factor profiles of a given plasma. Three types of plasmas have been analysed. In the Radiative Improved modes of TEXTOR, high charge number ions seeding lowers the growth rates. In Tore Supra-high density plasmas, a strong magnetic shear and/or a more efficient ion heating linked to a bifurcation of the toroidal rotation direction (which is not understood) trigger the improvement of the confinement. In other Tore Supra plasmas, locally steep electron pressure gradients have been obtained following magnetic shear reversal. This locally negative magnetic shear has a stabilizing effect. In these three families of plasmas, the growth rates decrease, the confinement improves, the density and temperature profiles are steeper. This steepening induces an increase of the rotation shearing rate, which then maintains the confinement high quality. (author)
Plasma position control in TCABR Tokamak
International Nuclear Information System (INIS)
Galvao, R.M.O.; Kuznetsov, Yu. K.; Nascimento, I.C.; Fonseca, A.M.M.; Silva, R.P. da; Ruchko, L.F.; Tuszel, A.G.; Reis, A.P. dos; Sanada, E.K.
1998-01-01
The plasma control position in the TCABR tokamak is described. The TCA tokamak was transferred from the Centre de Recherches en Physique des Plasmas, Lausanne, to the Institute of Physics of University of Sao Paulo, renamed TCABR (α=0.18 m, R = 0.62 m, B = 1 T,I p = 100 kA). The control system was reconstructed using mainly components obtained from the TCA tokamak. A new method of plasma position determination is used in TCABR to improve its accuracy. A more detailed theoretical analysis of the feed forward and feedback control is performed as compared with. (author)
Plasma equilibrium and instabilities in tokamaks
International Nuclear Information System (INIS)
Caldas, I.L.; Vannucci, A.
1985-01-01
A phenomenological introduction of some of the main theoretical and experimental features on equilibrium and instabilities in tokamaks is presented. In general only macroscopic effects are considered, being the plasma described as a fluid. (L.C.) [pt
Fast wave current drive in reactor scale tokamak plasmas
International Nuclear Information System (INIS)
Becoulet, A.; Moreau, D.; Saoutic, B.
1991-01-01
The possibility for driving current in large tokamak plasmas using the fast magnetosonic wave is analysed in terms of linear propagation-absorption, and also in terms of quasilinear absorption through an hamiltonian analysis of the wave-particle interaction. The tokamak geometry is shown to strongly influence the capability for the fast wave to sustain a significant part of the toroidal current. Synergetic effects with other scenarios are also discussed
Submillimeter wave propagation in tokamak plasmas
International Nuclear Information System (INIS)
Ma, C.H.; Hutchinson, D.P.; Staats, P.A.; Vander Sluis, K.L.; Mansfield, D.K.; Park, H.; Johnson, L.C.
1986-01-01
Propagation of submillimeter waves (smm) in tokamak plasma was investigated both theoretically and experimentally to ensure successful measurements of electron density and plasma current distributions in tokamak devices. Theoretical analyses were carried out to study the polarization of the smm waves in TFTR and ISX-B tokamaks. A multichord smm wave interferometer/polarimeter system was employed to simultaneously measure the line electron density and poloidal field-induced Faraday rotation in the ISX-B tokamak. The experimental study on TFTR is under way. Computer codes were developed and have been used to study the wave propagation and to reconstruct the distributions of plasma current and density from the measured data. The results are compared with other measurements. 5 references, 2 figures
Three novel tokamak plasma regimes in TFTR
International Nuclear Information System (INIS)
Furth, H.P.
1985-10-01
Aside from extending ''standard'' ohmic and neutral beam heating studies to advanced plasma parameters, TFTR has encountered a number of special plasma regimes that have the potential to shed new light on the physics of tokamak confinement and the optimal design of future D-T facilities: (1) High-powered, neutral beam heating at low plasma densities can maintain a highly reactive hot-ion population (with quasi-steady-state beam fueling and current drive) in a tokamak configuration of modest bulk-plasma confinement requirements. (2) Plasma displacement away from limiter contact lends itself to clarification of the role of edge-plasma recycling and radiation cooling within the overall pattern of tokamak heat flow. (3) Noncentral auxiliary heating (with a ''hollow'' power-deposition profile) should serve to raise the central tokamak plasma temperature without deterioration of central region confinement, thus facilitating the study of alpha-heating effects in TFTR. The experimental results of regime (3) support the theory that tokamak profile consistency is related to resistive kink stability and that the global energy confinement time is determined by transport properties of the plasma edge region
Three novel tokamak plasma regimes in TFTR
Energy Technology Data Exchange (ETDEWEB)
Furth, H.P.
1985-10-01
Aside from extending ''standard'' ohmic and neutral beam heating studies to advanced plasma parameters, TFTR has encountered a number of special plasma regimes that have the potential to shed new light on the physics of tokamak confinement and the optimal design of future D-T facilities: (1) High-powered, neutral beam heating at low plasma densities can maintain a highly reactive hot-ion population (with quasi-steady-state beam fueling and current drive) in a tokamak configuration of modest bulk-plasma confinement requirements. (2) Plasma displacement away from limiter contact lends itself to clarification of the role of edge-plasma recycling and radiation cooling within the overall pattern of tokamak heat flow. (3) Noncentral auxiliary heating (with a ''hollow'' power-deposition profile) should serve to raise the central tokamak plasma temperature without deterioration of central region confinement, thus facilitating the study of alpha-heating effects in TFTR. The experimental results of regime (3) support the theory that tokamak profile consistency is related to resistive kink stability and that the global energy confinement time is determined by transport properties of the plasma edge region.
Particle and energy balances in tokamak plasmas
International Nuclear Information System (INIS)
Tazima, Teruhiko
1978-06-01
Computational and experimental studies on particle and energy balances in tokamak plasmas are described. Firstly, concerning the modeling of tokamak plasmas, the particle balance considering diffusion and recycling, and the energy balance considering transport and energy losses due to impurities are discussed. Production mechanisms of gaseous and metallic impurities, which play important role in tokamak plasmas, are also discussed from a viewpoint of plasma-wall interactions. Scaling laws of density, temperature and energy confinement time are shown on the basis of recent data. Secondarily, tokamak plasmas are simulated with the above model, and anomalous diffusion and electron thermal conduction are indicated. Characteristics of a future tokamak plasma are also simulated. Stationary impurity density distributions and related energy losses, such as bremsstrahlung, ionization and excitation, are calculated taking into account diffusion and ionization processes. Edge cooling by oxygen impurities is described quantitatively compared with experiments. Permissible impurity levels of carbon, oxygen and iron in future large tokamaks are estimated. Thirdly, experimental studies on surface cleaning methods of the first wall are described; discharge cleaning in JFT-2, baking effect on the outgassing rates of wall materials, surface treatment of high-temperature molybdenum by oxygen and hydrogen gases, and in-situ coating of molybdenum by a coaxial magnetron sputter method. Lastly, problems in future large tokamaks aiming at break-even or self-ignited plasma are discussed quantitatively, such as trapped particle instabilities, impurities and additional heating. It is predicted that new conceptions will be necessary to overcome the problems and attain the fusion goal. (auth.)
Energy Technology Data Exchange (ETDEWEB)
Sarazin, Y
2004-03-01
This document gathers the lectures made in the framework of a Ph.D level physics class dedicated to plasma physics. This course is made up of 3 parts : 1) collisions and transport, 2) transport and turbulence, and 3) study of a few exchange instabilities. More precisely the first part deals with the following issues: thermonuclear fusion, Coulomb collisions, particles trajectories in a tokamak, neo-classical transport in tokamaks, the bootstrap current, and ware pinch. The second part involves: particle transport in tokamaks, quasi-linear transport, resonance islands, resonance in tokamaks, from quasi to non-linear transport, and non-linear saturation of turbulence. The third part deals with: shift velocities in fluid theory, a model for inter-change instabilities, Rayleigh-Benard instability, Hasegawa-Wakatani model, and Hasegawa-Mima model. This document ends with a series of appendices dealing with: particle-wave interaction, determination of the curvature parameter G, Rossby waves.
Electron thermal transport in tokamak plasmas
Energy Technology Data Exchange (ETDEWEB)
Konings, J.A.
1994-11-30
The process of fusion of small nuclei thereby releasing energy, as it occurs continuously in the sun, is essential for the existence of mankind. The same process applied in a controlled way on earth would provide a clean and an abundant energy source, and be the long term solution of the energy problem. Nuclear fusion requires an extremely hot (10{sup 8} K) ionized gas, a plasma, that can only be maintained if it is kept insulated from any material wall. In the so called `tokamak` this is achieved by using magnetic fields. The termal insulation, which is essential if one wants to keep the plasma at the high `fusion` temperature, can be predicted using basic plasma therory. A comparison with experiments in tokamaks, however, showed that the electron enery losses are ten to hundred times larger than this theory predicts. This `anomalous transport` of thermal energy implies that, to reach the condition for nuclear fusion, a fusion reactor must have very large dimensions. This may put the economic feasibility of fusion power in jeopardy. Therefore, in a worldwide collaboration, physicists study tokamak plasmas in an attempt to understand and control the energy losses. From a scientific point of view, the mechanisms driving anomalous transport are one of the challenges in fudamental plasma physics. In Nieuwegein, a tokamak experiment (the Rijnhuizen Tokamak Project, RTP) is dedicated to the study of anomalous transport, in an international collaboration with other laboratories. (orig./WL).
Plasma-gun fueling for tokamak reactors
International Nuclear Information System (INIS)
Ehst, D.A.
1980-11-01
In light of the uncertain extrapolation of gas puffing for reactor fueling and certain limitations to pellet injection, the snowplow plasma gun has been studied as a fueling device. Based on current understanding of gun and plasma behavior a design is proposed, and its performance is predicted in a tokamak reactor environment
Boundary Plasma Turbulence Simulations for Tokamaks
International Nuclear Information System (INIS)
Xu, X.; Umansky, M.; Dudson, B.; Snyder, P.
2008-05-01
The boundary plasma turbulence code BOUT models tokamak boundary-plasma turbulence in a realistic divertor geometry using modified Braginskii equations for plasma vorticity, density (ni), electron and ion temperature (T e ; T i ) and parallel momenta. The BOUT code solves for the plasma fluid equations in a three dimensional (3D) toroidal segment (or a toroidal wedge), including the region somewhat inside the separatrix and extending into the scrape-off layer; the private flux region is also included. In this paper, a description is given of the sophisticated physical models, innovative numerical algorithms, and modern software design used to simulate edge-plasmas in magnetic fusion energy devices. The BOUT code's unique capabilities and functionality are exemplified via simulations of the impact of plasma density on tokamak edge turbulence and blob dynamics
Advanced tokamak burning plasma experiment
International Nuclear Information System (INIS)
Porkolab, M.; Bonoli, P.T.; Ramos, J.; Schultz, J.; Nevins, W.N.
2001-01-01
A new reduced size ITER-RC superconducting tokamak concept is proposed with the goals of studying burn physics either in an inductively driven standard tokamak (ST) mode of operation, or in a quasi-steady state advanced tokamak (AT) mode sustained by non-inductive means. This is achieved by reducing the radiation shield thickness protecting the superconducting magnet by 0.34 m relative to ITER and limiting the burn mode of operation to pulse lengths as allowed by the TF coil warming up to the current sharing temperature. High gain (Q≅10) burn physics studies in a reversed shear equilibrium, sustained by RF and NB current drive techniques, may be obtained. (author)
Tokamak Plasmas: Electron temperature $(T_ {e}) $ measurements ...
Indian Academy of Sciences (India)
Home; Journals; Pramana – Journal of Physics; Volume 55; Issue 5-6. Tokamak Plasmas : Electron temperature ( T e ) measurements by Thomson scattering system. R Rajesh B Ramesh Kumar S K Varshney Manoj Kumar Chhaya Chavda Aruna Thakkar N C Patel Ajai Kumar Aditya Team. Contributed Papers Volume 55 ...
INTEGRATED PLASMA CONTROL FOR ADVANCED TOKAMAKS
Energy Technology Data Exchange (ETDEWEB)
HUMPHREYS,D.A; FERRON,J.R; JOHNSON,R.D; LEUER,J.A; PENAFLOR,B.G; WALKER,M.L; WELANDER,A.S; KHAYRUTDINOV,R.R; DOKOUKA,V; EDGELL,D.H; FRANSSON,C.M
2003-10-01
OAK-B135 Advanced tokamaks (AT) are distinguished from conventional tokamaks by their high degree of shaping, achievement of profiles optimized for high confinement and stability characteristics, and active stabilization of MHD instabilities to attain high values of normalized beta and confinement. These high performance fusion devices thus require accurate regulation of the plasma boundary, internal profiles, pumping, fueling, and heating, as well as simultaneous and well-coordinated MHD control action to stabilize such instabilities as tearing modes and resistive wall modes. Satisfying the simultaneous demands on control accuracy, reliability, and performance for all of these subsystems requires a high degree of integration in both design and operation of the plasma control system in an advanced tokamak. The present work describes the approach, benefits, and progress made in integrated plasma control with application examples drawn from the DIII-D tokamak. The approach includes construction of plasma and system response models, validation of models against operating experiments, design of integrated controllers which operate in concert with one another as well as with supervisory modules, simulation of control action against off-line and actual machine control platforms, and iteration of the design-test loop to optimize performance.
Analysis of tokamak plasma confinement modes using the fast
Indian Academy of Sciences (India)
The Fourier analysis is a satisfactory technique for detecting plasma confinement modes in tokamaks. The confinement mode of tokamak plasma was analysed using the fast Fourier transformation (FFT). For this purpose, we used the data of Mirnov coils that is one of the identifying tools in the IR-T1 tokamak, with and ...
Coherent structures in tokamak plasmas workshop: Proceedings
International Nuclear Information System (INIS)
Koniges, A.E.; Craddock, G.G.
1992-08-01
Coherent structures have the potential to impact a variety of theoretical and experimental aspects of tokamak plasma confinement. This includes the basic processes controlling plasma transport, propagation and efficiency of external mechanisms such as wave heating and the accuracy of plasma diagnostics. While the role of coherent structures in fluid dynamics is better understood, this is a new topic for consideration by plasma physicists. This informal workshop arose out of the need to identify the magnitude of structures in tokamaks and in doing so, to bring together for the first time the surprisingly large number of plasma researchers currently involved in work relating to coherent structures. The primary purpose of the workshop, in addition to the dissemination of information, was to develop formal and informal collaborations, set the stage for future formation of a coherent structures working group or focus area under the heading of the Tokamak Transport Task Force, and to evaluate the need for future workshops on coherent structures. The workshop was concentrated in four basic areas with a keynote talk in each area as well as 10 additional presentations. The issues of discussion in each of these areas was as follows: Theory - Develop a definition of structures and coherent as it applies to plasmas. Experiment - Review current experiments looking for structures in tokamaks, discuss experimental procedures for finding structures, discuss new experiments and techniques. Fluids - Determine how best to utilize the resource of information available from the fluids community both on the theoretical and experimental issues pertaining to coherent structures in plasmas. Computation - Discuss computational aspects of studying coherent structures in plasmas as they relate to both experimental detection and theoretical modeling
Modelling and control of a tokamak plasma
International Nuclear Information System (INIS)
Bremond, S.
1995-01-01
Vertically elongated tokamak plasmas, while attractive as regards Lawson criteria, are intrinsically instable. It is found that the open-loop instability dynamics is characterised by the relative value of two dimensionless parameters: the coefficient of inductive coupling between the vessel and the coils, and the coil damping efficiency on the plasma displacement relative to that of the vessel. Applications to Tore Supra -where the instability is due to the iron core attraction- and DIII-D are given. A counter-effect of the vessel, which temporarily reverses the effect of coil control on the plasma displacement, is seen when the inductive coupling is higher than the damping ratio. Precise control of the plasma boundary is necessary if plasma-wall interaction and/or coupling to heating antennas are to be monitored. A positional drift, of a few mm/s, which had been observed in the Tore Supra tokamak, is explained and corrected. A linear plasma shape response model is then derived from magnetohydrodynamic equilibrium calculation, and proved to be in good agreement with experimental data. An optimal control law is derived, which minimizes an integral quadratic criteria on tracking errors and energy expenditure. This scheme avoids compensating coil currents, and could render local plasma shaping more precise. (authors). 123 refs., 77 figs., 6 tabs., 4 annexes
High beta plasmas in the PBX tokamak
International Nuclear Information System (INIS)
Bol, K.; Buchenauer, D.; Chance, M.
1986-04-01
Bean-shaped configurations favorable for high β discharges have been investigated in the Princeton Beta Experiment (PBX) tokamak. Strongly indented bean-shaped plasmas have been successfully formed, and beta values of over 5% have been obtained with 5 MW of injected neutral beam power. These high beta discharges still lie in the first stability regime for ballooning modes, and MHD stability analysis implicates the external kink as responsible for the present β limit
High beta plasmas in the PBX tokamak
Energy Technology Data Exchange (ETDEWEB)
Bol, K.; Buchenauer, D.; Chance, M.; Couture, P.; Fishman, H.; Fonck, R.; Gammel, G.; Grek, B.; Ida, K.; Itami, K.
1986-04-01
Bean-shaped configurations favorable for high ..beta.. discharges have been investigated in the Princeton Beta Experiment (PBX) tokamak. Strongly indented bean-shaped plasmas have been successfully formed, and beta values of over 5% have been obtained with 5 MW of injected neutral beam power. These high beta discharges still lie in the first stability regime for ballooning modes, and MHD stability analysis implicates the external kink as responsible for the present ..beta.. limit.
Electron cyclotron emission from tokamak plasmas
International Nuclear Information System (INIS)
Sillen, R.M.J.
1986-01-01
Emitted electron radiation can be used as a diagnostic signal to measure the electron temperature of a thermonuclear plasma. This type of diagnostics is well established in tokamak physics. In ch. 2 of this thesis the development, calibration and special design features are treated of a six-channel prototype of a twelve-channel grating spectrometer which is built for JET at Culham for electron cyclotron emission (ECE) measurements. In order to test this prototype measurements have been performed with the T-10 tokamak at the Kurchatov Institute in Moscow. With this prototype nearly half of the temperature profile of the T-10 could be measured. Detailed observations of sawteeth instabilities have been performed. Plasma heating by electron cyclotron resonance heating experiments was studied. A detailed description of these measurements and results is given in ch. 3. Often ECE spectra from tokamaks showed non-thermal features. In order to interprete them a computer code Notec has been developed. This code that calculates the ECE radiation emerging from the plasma for a 3-D configuration, is described in ch. 4. Some preliminary results and applications are presented. (Auth.)
Materials experience with tokamak plasmas
International Nuclear Information System (INIS)
Colchin, R.J.
1979-01-01
The primary effects of using various wall and limiter materials have been in the amount and kind of impurities they introduce into the plasma. Only a limited number of materials have been employed to date. These include gold, stainless steel, inconel, glass, alumina, and titanium for first walls and carbon, stainless steel, inconel, alumina, silicon carbide, boron carbide, molybdenum, tantalum, titanium, and tungsten for limiters and divertors. Limiter surfaces bear the brunt of the plasma bombardment and so typically introduce impurities far out of proportion to their relative size. The ratio of the bombarded limiter area to that of the first wall is of order 1 to 10 3
Materials experience with tokamak plasmas
International Nuclear Information System (INIS)
Colchin, R.J.
1979-01-01
The primary effects of using various wall and limiter materials have been in the amount and kind of impurities they introduce into the plasma. The materials employed to date include gold, stainless steel, inconel, glass, alumina, and titanium for first walls and carbon, stainless steel, inconel, alumina, silicon carbide, boron carbide, molybdenum, tantalum, titanium, and tungsten for limiters and divertors. Limiter surfaces bear the brunt of the plasma bombardment and so typically introduce impurities far out of proportion to their relative size. The ratio of the bombarded limiter area to that of the first wall is of order 1 to 10 3
Current drive for spherical tokamak plasmas
International Nuclear Information System (INIS)
Storer, R.
1999-01-01
Very low aspect ratio spherical tokamaks have proved to have some very useful and remarkable properties including very high values of the plasma pressure to magnetic field pressure. Following the construction of the Start tokamak, a number of such configurations have been constructed. One of the difficulties encountered is in providing sufficient inductive current drive due to the competing requirements of the need to keep the aspect ratio low and providing the space for the central current-carrying rod with an internal inductive coil. An alternative current drive technique would be very useful. In a parallel development it has been shown that a rotating magnetic field can drive a significant non-linear Hall current in a spherical plasma. Successful experiments of this concept have been made with a device called the Rotamak. In its original configuration this device was a field reversed configuration without a toroidal magnetic field but with a vertical field to establish the magnetic hydrodynamical equilibrium. However, recent modifications have shown that increased current can be driven if a central current-carrying rod is used to provide an applied toroidal field. The new Rotamak has then a spherical tokamak magnetic field structure. This work will present new calculations which model the above structure and include the effect of the applied toroidal field in addition to the steady vertical field and the rotating (current-drive) magnetic field. The problem is fully three dimensional and non-linear and involves the application of interesting computational techniques. The potential of using the rotating field current drive technique for spherical tokamaks will be evaluated
Mathematical modeling plasma transport in tokamaks
International Nuclear Information System (INIS)
Quiang, Ji
1995-01-01
In this work, the author applied a systematic calibration, validation and application procedure based on the methodology of mathematical modeling to international thermonuclear experimental reactor (ITER) ignition studies. The multi-mode plasma transport model used here includes a linear combination of drift wave branch and ballooning branch instabilities with two a priori uncertain constants to account for anomalous plasma transport in tokamaks. A Bayesian parameter estimation method is used including experimental calibration error/model offsets and error bar rescaling factors to determine the two uncertain constants in the transport model with quantitative confidence level estimates for the calibrated parameters, which gives two saturation levels of instabilities. This method is first tested using a gyroBohm multi-mode transport model with a pair of DIII-D discharge experimental data, and then applied to calibrating a nominal multi-mode transport model against a broad database using twelve discharges from seven different tokamaks. The calibrated transport model is then validated on five discharges from JT-60 with no adjustable constants. The results are in a good agreement with experimental data. Finally, the resulting class of multi-mode tokamak plasma transport models is applied to the transport analysis of the ignition probability in a next generation machine, ITER. A reference simulation of basic ITER engineering design activity (EDA) parameters shows that a self-sustained thermonuclear burn with 1.5 GW output power can be achieved provided that impurity control makes radiative losses sufficiently small at an average plasma density of 1.2 X 10 20 /m 3 with 50 MW auxiliary heating. The ignition probability of ITER for the EDA parameters, can be formally as high as 99.9% in the present context. The same probability for concept design activity (CDA) parameters of ITER, which has smaller size and lower current, is only 62.6%
Magnetohydrodynamic Waves and Instabilities in Rotating Tokamak Plasmas
J.W. Haverkort (Willem)
2013-01-01
htmlabstractOne of the most promising ways to achieve controlled nuclear fusion for the commercial production of energy is the tokamak design. In such a device, a hot plasma is confined in a toroidal geometry using magnetic fields. The present generation of tokamaks shows significant plasma
Plasma startup patterns in tokamak reactors
International Nuclear Information System (INIS)
Maki, Koichi; Tone, Tatsuzo.
1983-01-01
Plasma startup patterns are studied from the viewpoint of net power loss represented by the total power loss less the α-particle heating power. The existence is shown of a critical temperature of plasma at which the net power loss becomes independent of plasma density. Observations are made which indicate that the net power loss decreases with lowering plasma density in the range below the critical temperature and vice versa, whether governed by empirical or trapped-ion scaling laws. A startup pattern is presented which minimizes the net power loss during startup, and which prescribes that: (1) The plasma density should be kept as low as possible until the plasma is heated up to the critical temperature; (2) thereafter, the plasma density should be increased to its steady state value while retaining the critical temperature; and (3) finally, with the density kept constant, the temperature should be further raised to its steady state value. The net power loss at critical temperature represents the lower limit of heating power required to bring the plasma to steady state in tokamak reactors. (author)
Viscosity in the edge of tokamak plasmas
International Nuclear Information System (INIS)
Stacey, W.M.
1993-05-01
A fluid representation of viscosity has been incorporated into a set of fluid equations that are maximally ordered in the ''short-radial-gradient-scale-length'' (srgsl) ordering that is appropriate for the edge of tokamak plasmas. The srgsl ordering raises viscous drifts and other viscous terms to leading order and fundamentally alters the character of the fluid equations. A leasing order viscous drift is identified. Viscous-driven radial particle and energy fluxes in the scrape-off layer and divertor channel are estimated to have an order unity effect in reducing radial peaking of energy fluxes transported along the field lines to divertor collector plates
Impurity screening of scrape-off plasma in a tokamak
International Nuclear Information System (INIS)
Kishimoto, Hiroshi; Tani, Keiji; Nakamura, Hiroo
1981-11-01
Impurity screening effect of a scrape-off layer has been studied in a tokamak, based on a simple model of wall-released impurity behavior. Wall-sputtered impurities are stopped effectively by the scrape-off plasma for a medium-Z or high-Z wall system while major part of impurities enters the main plasma in a low-Z wall system. The screening becomes inefficient with increase of scrape-off plasma temperature. Successive multiplication of recycling impurities in the scrape-off layer is large for a high-Z wall and is enhanced by a rise of scrape-off plasma temperature. The stability of plasma-wall interaction is determined by a multiplication factor of recycling impurities. (author)
Stability of tearing modes in tokamak plasmas
Energy Technology Data Exchange (ETDEWEB)
Hegna, C.C.; Callen, J.D.
1994-02-01
The stability properties of m {ge} 2 tearing instabilities in tokamak plasmas are analyzed. A boundary layer theory is used to find asymptotic solutions to the ideal external kink equation which are used to obtain a simple analytic expression for the tearing instability parameter {Delta}{prime}. This calculation generalizes previous work on this topic by considering more general toroidal equilibria (however, toroidal coupling effects are ignored). Constructions of {Delta}{prime} are obtained for plasmas with finite beta and for islands that have nonzero width. A simple heuristic estimate is given for the value of the saturated island width when the instability criterion is violated. A connection is made between the calculation of the asymptotic matching parameter in the finite beta and island width case to the nonlinear analog of the Glasser effect.
Technology and plasma-materials interaction processes of tokamak disruptions
International Nuclear Information System (INIS)
McGrath, R.T.; Kellman, A.G.
1992-01-01
A workshop on the technology and plasma-materials interaction processes of tokamak disruptions was held April 3, 1992 in Monterey, California, as a satellite meeting of the 10th International Conference on Plasma-Surface Interactions. The objective was to bring together researchers working on disruption measurements in operating tokamaks, those performing disruption simulation experiments using pulsed plasma gun, electron beam and laser systems, and computational physicists attempting to model the evolution and plasma-materials interaction processes of tokamak disruptions. This is a brief report on the workshop. 4 refs
Ion cyclotron emission in tokamak plasmas
International Nuclear Information System (INIS)
Fraboulet, D.
1996-01-01
Detection of α(3.5 MeV) fusion products will be of major importance for the achievement of self sustained discharges in fusion thermonuclear reactors. Due to their cyclotronic gyration in the confining magnetic field of a tokamak, α particles are suspected to radiate in the radio-frequency band [RF: 10-500 MHz]. Our aim is to determine whether detection of RF emission radiated from a reactor plasma can provide information concerning those fusion products. We observed experimentally that the RF emission radiated from fast ions situated in the core of the discharge is detectable with a probe located at the plasma edge. For that purpose, fast temporal acquisition of spectral power was achieved in a narrow frequency band. We also propose two complementary models for this emission. In the first one, we describe locally the energy transfer between the photon population and the plasma and we compute the radiation equilibrium taking place in the tokamak. α particles are not the unique species involved in the equilibrium and it is necessary to take into account all other species present in the plasma (Deuterium, Tritium, electrons,...). Our second model consists in the numerical resolution of the Maxwell-Vlasov with the use of a variational formulation, in which all polarizations are considered and the 4 first cyclotronic harmonics are included in a 1-D slab geometry. The development of this second model leads to the proposal for an experimental set up aiming to the feasibility demonstration of a routine diagnostic providing the central α density in a reactor. (author)
Plasma diagnostics for the compact ignition tokamak
International Nuclear Information System (INIS)
Medley, S.S.; Young, K.M.
1988-06-01
The primary mission of the Compact Ignition Tokamak (CIT) is to study the physics of alpha-particle heating in an ignited D-T plasma. A burn time of about 10 /tau//sub E/ is projected in a divertor configuration with baseline machine design parameters of R=2.10 m, 1=0.65 m, b=1.30 m, I/sub p/=11 MA, B/sub T/=10 T and 10-20 MW of auxiliary rf heating. Plasma temperatures and density are expected to reach T/sub e/(O) /approximately/20 keV, T/sub i/(O) /approximately/30 keV, and n/sub e/(O) /approximately/ 1 /times/ 10 21 m/sup /minus/3/. The combined effects of restricted port access to the plasma, the presence of severe neutron and gamma radiation backgrounds, and the necessity for remote of in-cell components create challenging design problems for all of the conventional diagnostic associated with tokamak operations. In addition, new techniques must be developed to diagnose the evolution in space, time, and energy of the confined alpha distribution as well as potential plasma instabilities driven by collective alpha-particle effects. The design effort for CIT diagnostics is presently in the conceptual phase with activity being focused on the selection of a viable diagnostic set and the identification of essential research and development projects to support this process. A review of these design issues and other aspects impacting the selection of diagnostic techniques for the CIT experiment will be presented. 28 refs., 10 figs., 2 tabs
Investigation of plasma equilibrium in HL-1 tokamak
International Nuclear Information System (INIS)
Lu Zhihong; Jiang Yunxia; Yang Jinwei; Zhang Baozhu; Qiu Wei; Qin Yunwen
1987-01-01
In this paper, the plasma equilibrium in HL-1 tokamak has been discussed. The horizontal and vertical displacement of plasma is measured using a symmetical magneic probe system, and the temporal evolution of displacements is given by a data acquisition system with micro-computer. The influence of various stray fields on plasma equilibrium has been analysed. The direction and value of horizontal stray field induced by the totoidal field coils and primary windings are determined using vertical displacement data. By adjusting parameters of internal and external vertical field, in the flat part of discharge current, the plasma can be kept in its equilibuium state at the place where is 3 cm outer of chamber certre, i.e nearby the centre of limiter
Neoclassical transport of impurtities in tokamak plasmas
International Nuclear Information System (INIS)
Hirshman, S.P.; Sigmar, D.J.
1981-05-01
Tokamak plasmas are inherently comprised of multiple ion species. This is due to wall-bred impurities and, in future reactors, will result from fusion-born alpha particles. Relatively small concentrations of highly charged non-hydrogenic impurities can strongly influence plasma transport properties whenever n/sub I/e/sub I/ 2 /n/sub H/e 2 greater than or equal to (m/sub e//m/sub H/)/sup 1/2/. The determination of the complete neoclassical Onsager matrix for a toroidally confined multispecies plasma, which provides the linear relation between the surface averaged radial fluxes and the thermodynamic forces (i.e., gradients of density and temperature, and the parallel electric field), is reviewed. A closed set of one-dimensional moment equations is presented for the time evolution of thermodynamic and magnetic field quantities which results from collisional transport of the plasma and two dimensional motion of the magnetic flux surface geometry. The effects of neutral beam injection on the equilibrium and transport properties of a toroidal plasma are consistently included
Modelling and control of a tokamak plasma; Modelisation et commande d`un plasma de tokamak
Energy Technology Data Exchange (ETDEWEB)
Bremond, S.
1995-10-18
Vertically elongated tokamak plasmas, while attractive as regards Lawson criteria, are intrinsically instable. It is found that the open-loop instability dynamics is characterised by the relative value of two dimensionless parameters: the coefficient of inductive coupling between the vessel and the coils, and the coil damping efficiency on the plasma displacement relative to that of the vessel. Applications to Tore Supra -where the instability is due to the iron core attraction- and DIII-D are given. A counter-effect of the vessel, which temporarily reverses the effect of coil control on the plasma displacement, is seen when the inductive coupling is higher than the damping ratio. Precise control of the plasma boundary is necessary if plasma-wall interaction and/or coupling to heating antennas are to be monitored. A positional drift, of a few mm/s, which had been observed in the Tore Supra tokamak, is explained and corrected. A linear plasma shape response model is then derived from magnetohydrodynamic equilibrium calculation, and proved to be in good agreement with experimental data. An optimal control law is derived, which minimizes an integral quadratic criteria on tracking errors and energy expenditure. This scheme avoids compensating coil currents, and could render local plasma shaping more precise. (authors). 123 refs., 77 figs., 6 tabs., 4 annexes.
Tokamak Plasmas: Measurement of temperature ﬂuctuations and ...
Indian Academy of Sciences (India)
... Refresher Courses · Symposia · Live Streaming. Home; Journals; Pramana – Journal of Physics; Volume 55; Issue 5-6. Tokamak Plasmas : Measurement of temperature ﬂuctuations and anomalous transport in the SINP tokamak. R Kumar S K Saha. Contributed Papers Volume 55 Issue 5-6 November-December 2000 pp ...
Control strategy for plasma equilibrium in a tokamak
International Nuclear Information System (INIS)
Miskell, R.V.
1975-08-01
Dynamic control of the plasma position within the torus of a TOKAMAK fusion device is a significant factor in the development of nuclear fusion as an energy source. This investigation develops a state variable model of a TOKAMAK thermonuclear device, suitable for application of modern control theory techniques. (auth)
Multiscale coherent structures in tokamak plasma turbulence
International Nuclear Information System (INIS)
Xu, G. S.; Wan, B. N.; Zhang, W.; Yang, Q. W.; Wang, L.; Wen, Y. Z.
2006-01-01
A 12-tip poloidal probe array is used on the HT-7 superconducting tokamak [Li, Wan, and Mao, Plasma Phys. Controlled Fusion 42, 135 (2000)] to measure plasma turbulence in the edge region. Some statistical analysis techniques are used to characterize the turbulence structures. It is found that the plasma turbulence is composed of multiscale coherent structures, i.e., turbulent eddies and there is self-similarity in a relative short scale range. The presence of the self-similarity is found due to the structural similarity of these eddies between different scales. These turbulent eddies constitute the basic convection cells, so the self-similar range is just the dominant scale range relevant to transport. The experimental results also indicate that the plasma turbulence is dominated by low-frequency and long-wavelength fluctuation components and its dispersion relation shows typical electron-drift-wave characteristics. Some large-scale coherent structures intermittently burst out and exhibit a very long poloidal extent, even longer than 6 cm. It is found that these large-scale coherent structures are mainly contributed by the low-frequency and long-wavelength fluctuating components and their presence is responsible for the observations of long-range correlations, i.e., the correlation in the scale range much longer than the turbulence decorrelation scale. These experimental observations suggest that the coexistence of multiscale coherent structures results in the self-similar turbulent state
Tokamak-FED plasma-engineering assessments
International Nuclear Information System (INIS)
Peng, Y.K.M.; Lyon, J.F.; Rutherford, P.H.
1981-01-01
A wide range of plasma assumptions and scenarios has been examined for the current US tokamak FED concept, which aims to provide a controlled, long pulse (approx. 100 s) burning plasma with an energy amplification of greater than or equal to 5, a fusion power of 180 MW, and a neutron wall load of greater than or equal to 0.4 MW/m 2 . The results of the assessment suggest that the current FED baseline parameters of R = 5.0 m, B/sub t/ = 3.6 T, a = 1.3 m, b = 2.1 m (D-shape), and I/sub p/ = 5.4 MA are appropriate in reaching the above plasma performance, despite uncertainties in several plasma physics areas, such as confinement scaling, achievable beta, impurity control, etc. To enhance the probability of achieving fusion ignition and to provide some margin against a short fall in our physics projections in FED, a limited operating capability at B/sub t/ = 4.6 T and I/sub p/ = 6.5 MA is incorporated. Various other options and remedies have also been assessed aiming to alleviate the impact of the uncertainties on the FED design concept. These approaches appear promising because they can be studied within the current fusion physics program and may lead to drastically more cost-effective FED concepts
Transport Bifurcation in a Rotating Tokamak Plasma
International Nuclear Information System (INIS)
Highcock, E. G.; Barnes, M.; Schekochihin, A. A.; Parra, F. I.; Roach, C. M.; Cowley, S. C.
2010-01-01
The effect of flow shear on turbulent transport in tokamaks is studied numerically in the experimentally relevant limit of zero magnetic shear. It is found that the plasma is linearly stable for all nonzero flow shear values, but that subcritical turbulence can be sustained nonlinearly at a wide range of temperature gradients. Flow shear increases the nonlinear temperature gradient threshold for turbulence but also increases the sensitivity of the heat flux to changes in the temperature gradient, except over a small range near the threshold where the sensitivity is decreased. A bifurcation in the equilibrium gradients is found: for a given input of heat, it is possible, by varying the applied torque, to trigger a transition to significantly higher temperature and flow gradients.
Extremely shaped plasmas to improve the Tokamak concept
International Nuclear Information System (INIS)
Piras, F.
2011-04-01
presented, and recent attempts to create a doublet plasma are reported. Since the magnetic field reconstruction page at the breakdown time is important to better diagnose these plasmas, the entire magnetic system of TCV has been calibrated with an original technique, also described in the manuscript. The last part of this thesis is devoted to the snowflake divertor configuration. This innovative plasma shape has been proposed and theoretically studied by Dr. D.D. Ryutov from the Lawrence Livermore National Laboratory. In Ryutov’s articles, this configuration was proposed to alleviate the problems of the plasma-wall interaction and possibly affect the plasma edge stability. The TCV tokamak was the first to report the creation and control of a snowflake configuration, and the candidate was the principal investigator of this work. These results are accordingly discussed in this thesis. Details are provided in particular on the strategy used to establish the configuration. An edge-localized mode (ELM) H-mode regime, supported by electron cyclotron heating, has been successfully established in a snowflake. This regime exhibits 2 to 3 times lower ELM frequency but only a 20%-30% increase in normalized ELM energy (ΔW ELM /W P ) compared to an identically-shaped, conventional, single-null, diverted H-mode. Enhanced stability of mid- to high-toroidal-mode-number ideal modes is consistent with the different snowflake ELM phenomenology. Finally, the capability of the snowflake to redistribute the edge power on the additional strike points has been confirmed experimentally and is also reported in this thesis. (author)
Tokamak Plasmas : Mirnov coil data analysis for tokamak ADITYA
Indian Academy of Sciences (India)
The spatial and temporal structures of magnetic signal in the tokamak ADITYA is analysed using recently developed singular value decomposition (SVD) technique. The analysis technique is ﬁrst tested with simulated data and then applied to the ADITYA Mirnov coil data to determine the structure of current peturbation as ...
Tokamak Plasmas: Mirnov coil data analysis for tokamak ADITYA
Indian Academy of Sciences (India)
The spatial and temporal structures of magnetic signal in the tokamak ADITYA is analysed using recently developed singular value decomposition (SVD) technique. The analysis technique is ﬁrst tested with simulated data and then applied to the ADITYA Mirnov coil data to determine the structure of current peturbation as ...
Current drive in high density tokamak plasma
International Nuclear Information System (INIS)
Sakaguchi, Seiichiro; Jotaki, Eriko; Kawasaki, Shoji; Moriyama, Shin-ichi; Nagao, Akihiro; Nakamura, Kazuo; Nakamura, Yukio; Hiraki, Naoki; Itoh, Satoshi
1989-01-01
Current drive in high density tokamak plasma is investigated, with special attention given to mode conversion and proximity conditions that characterize the propagation of electromagnetic waves in the case of current drive by lower hybrid waves. A simple model is used to evaluate the current drive efficiency, and its dependence on various parameters associated with equipment is investigated to provide information required in designing experimental equipment. A strong troidal magnetic field is necessary to produce high density plasma, and incident electromagnetic waves should have a high frequency to prevent the mode conversion, suggesting that a high frequency and a strong troidal field are essential to permit desirable propagation of incident electromagnetic waves. The evaluation of the current drive efficiency shows that the proximity conditions and the power spectrum of the lower hybrid waves entering the plasma are of importance. The average refraction factor in the direction of the troidal field should be larger than but close to that determined from the proximity conditions in order to increase the drive efficiency. As the intensity of the troidal field increases, the refraction factor determined from the proximity conditions decreases, leading to an increase in the drive efficiency. (N.K.)
TFTR/JET INTOR workshop on plasma transport tokamaks
International Nuclear Information System (INIS)
Singer, C.E.
1985-01-01
This report summarizes the proceedings of a Workshop on transport models for prediction and analysis of tokamak plasma confinement. Summaries of papers on theory, predictive modeling, and data analysis are included
Tokamak nonmaxwellian plasma dynamics in thermonuclear regime
International Nuclear Information System (INIS)
Cotsaftis, M.
1987-01-01
To reach ignition in a Tokamak plasma, large additional power P aux has to be injected in the device on top of the Joule heating P OH =VI r , V the plasma loop voltage, I r the resistive port of plasma current. Typi-cally JH ∼ 1 KeV, whereas ignition would requi- re IG ∼ 7-10 KeV. To gain this factor 7, one at least should inject additional power P aux ∼ 7P OH , supposing that nothing, especially the heat transport, is modified. This is by far not the case, with the so-called energy lifetime degradation, largely observed in oil experiments (but less dramatic with divertors), where energy lifetime tau E behaves like P tot -b with b∼1/2. In large machines where ignition temperature is the target to be imperiously reached, this implies to inject a very large power, typically P aux ∼ 50 to 100 MW, depending on size and parameters and on actual transport. So it is of importance with such figures, or even larger ones owing to uncertain ties, to optimize at best injected power by increasing its efficiency, both with respect to possible transport laws, and to physical phenomena governing heat flow in the system from the sources. This leads to the concept of scenarios, as time sequences of power input, where physical properties of the plasma system are used to build up ion temperature so that ignition is reached with minimum P tot = P OH + P aux and with fixed Q = Q o > 1. Elements for this study are given. The method is outlined. The resulting system of equations describing the evolution of a thermonuclear plasma is given
A control approach for plasma density in tokamak machines
Energy Technology Data Exchange (ETDEWEB)
Boncagni, Luca, E-mail: luca.boncagni@enea.it [EURATOM – ENEA Fusion Association, Frascati Research Center, Division of Fusion Physics, Rome, Frascati (Italy); Pucci, Daniele; Piesco, F.; Zarfati, Emanuele [Dipartimento di Ingegneria Informatica, Automatica e Gestionale ' ' Antonio Ruberti' ' , Sapienza Università di Roma (Italy); Mazzitelli, G. [EURATOM – ENEA Fusion Association, Frascati Research Center, Division of Fusion Physics, Rome, Frascati (Italy); Monaco, S. [Dipartimento di Ingegneria Informatica, Automatica e Gestionale ' ' Antonio Ruberti' ' , Sapienza Università di Roma (Italy)
2013-10-15
Highlights: •We show a control approach for line plasma density in tokamak. •We show a control approach for pressure in a tokamak chamber. •We show experimental results using one valve. -- Abstract: In tokamak machines, chamber pre-fill is crucial to attain plasma breakdown, while plasma density control is instrumental for several tasks such as machine protection and achievement of desired plasma performances. This paper sets the principles of a new control strategy for attaining both chamber pre-fill and plasma density regulation. Assuming that the actuation mean is a piezoelectric valve driven by a varying voltage, the proposed control laws ensure convergence to reference values of chamber pressure during pre-fill, and of plasma density during plasma discharge. Experimental results at FTU are presented to discuss weaknesses and strengths of the proposed control strategy. The whole system has been implemented by using the MARTe framework [1].
Electron and current density measurements on tokamak plasmas
International Nuclear Information System (INIS)
Lammeren, A.C.A.P. van.
1991-01-01
The first part of this thesis describes the Thomson-scattering diagnostic as it was present at the TORTUR tokamak. For the first time with this diagnostic a complete tangential scattering spectrum was recorded during one single laser pulse. From this scattering spectrum the local current density was derived. Small deviations from the expected gaussian scattering spectrum were observed indicating the non-Maxwellian character of the electron-velocity distribution. The second part of this thesis describes the multi-channel interferometer/ polarimeter diagnostic which was constructed, build and operated on the Rijnhuizen Tokamak Project (RTP) tokamak. The diagnostic was operated routinely, yielding the development of the density profiles for every discharge. When ECRH (Electron Cyclotron Resonance Heating) is switched on the density profile broadens, the central density decreases and the total density increases, the opposite takes place when ECRH is switched off. The influence of MHD (magnetohydrodynamics) activity on the density was clearly observable. In the central region of the plasma it was measured that in hydrogen discharges the so-called sawtooth collapse is preceded by an m=1 instability which grows rapidly. An increase in radius of this m=1 mode of 1.5 cm just before the crash is observed. In hydrogen discharges the sawtooth induced density pulse shows an asymmetry for the high- and low-field side propagation. This asymmetry disappeared for helium discharges. From the location of the maximum density variations during an m=2 mode the position of the q=2 surface is derived. The density profiles are measured during the energy quench phase of a plasma disruption. A fast flattening and broadening of the density profile is observed. (author). 95 refs.; 66 figs.; 7 tabs
Energy confinement of tokamak plasma with consideration of bootstrap current effect
International Nuclear Information System (INIS)
Yuan Ying; Gao Qingdi
1992-01-01
Based on the η i -mode induced anomalous transport model of Lee et al., the energy confinement of tokamak plasmas with auxiliary heating is investigated with consideration of bootstrap current effect. The results indicate that energy confinement time increases with plasma current and tokamak major radius, and decreases with heating power, toroidal field and minor radius. This is in reasonable agreement with the Kaye-Goldston empirical scaling law. Bootstrap current always leads to an improvement of energy confinement and the contraction of inversion radius. When γ, the ratio between bootstrap current and total plasma current, is small, the part of energy confinement time contributed from bootstrap current will be about γ/2
Measurements of plasma position in TJ-I Tokamak
International Nuclear Information System (INIS)
Quin, J.; Ascasibar, E.; Navarro, A. P.; Ochando, M. A.; Pastor, I.; Pedrosa, M. A.; Rodriguez, L.; Sanchez, J.
1994-01-01
This report presents the experimental measurements of plasma position in TJ-I tokamak by using small magnetic probes. The basis of method has been described in our previous work (1) in which the plasma current is considered as a filament current. The observed relations between the disruptive instabilities and plasma displacements are also show here. (Author) 7 refs
JOINT EXPERIMENTS ON SMALL TOKAMAKS: EDGE PLASMA STUDIES ON CASTOR
Czech Academy of Sciences Publication Activity Database
Van Oost, G.; Berta, M.; Brotánková, Jana; Dejarnac, Renaud; Del Bosco, E.; Dufková, Edita; Ďuran, Ivan; Gryaznevich, M.P.; Horáček, Jan; Hron, Martin; Malaquias, A.; Mank, G.; Peleman, P.; Sentkerestiová, Jana; Stöckel, Jan; Weinzettl, Vladimír; Zoletnik, S.; Tál, B.; Ferrera, J.; Fonseca, A.; Hegazy, H.; Kuznetsov, Y.; Ossyannikov, A.; Singh, A.; Sokholov, M.; Talebitaher, A.
2007-01-01
Roč. 47, č. 5 (2007), s. 378-386 ISSN 0029-5515 R&D Projects: GA AV ČR KJB100430504 Institutional research plan: CEZ:AV0Z20430508 Keywords : tokamak * edge plasma * turbulence * Langmuir probe * plasma radiation * Hall probe Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 3.278, year: 2007
Plasma recycling and marfe phenomenon in a tokamak
International Nuclear Information System (INIS)
Nedospasov, A.V.; Tokar', M.Z.; Vasin, N.L.
1988-01-01
The mechanism of Marfe formation as a result of the plasma transition to the state with strong recycling on the liner is investigated and calculated for T-10 tokamak conditions. The self-sustained oscillations of the peripheral plasma between the states with strong and weak recycling, explaining fluctuations of the plasma parameters in the discharges with Marfe, are studied
Magnetic diagnostic plasma position in the TCA/BR tokamak
International Nuclear Information System (INIS)
Galvao, R.M.O.; Kuznetsov, Yu.K.; Nascimento, I.C.
1996-01-01
The cross-section of the plasma column is TCA/BR has a nearly circular plasma shape. This allows implementation of simplified methods of magnetic diagnostics. Although these methods were in may tokamaks and are well described, their accuracies are not clearly defined because the very simplified theoretical model of plasma equilibrium on which they are based differs from the real conditions in tokamaks like TCA/BR. In this paper we present the methods of plasma position diagnostics in TCA/BR from external magnetic measurements with an error analysis. (author). 4 refs., 3 figs
Control of plasma position in the CASTOR tokamak
International Nuclear Information System (INIS)
Valovic, M.
1988-11-01
A simple servo-system designed for plasma position control in the CASTOR tokamak is described. Both radial and vertical plasma displacements were minimized using two servo-loops consisting of detection coils, a conventional electric controller and an amplifier operated as an unipolar voltage-controlled current source. To ensure the optimum conditions in the start-up phase of the discharge, currents in the servo-systems were externally preprogrammed. The prescribed plasma position was maintained with the accuracy of 3 mm. The feedback control improves plasma parameters, e.g. it removes the positional disruption at the end of the tokamak discharge. (J.U.). 4 figs., 3 refs
Stability analysis of tokamak plasmas; Analyse de stabilite de plasmas de tokamak
Energy Technology Data Exchange (ETDEWEB)
Bourdelle, C
2000-10-01
In a tokamak plasma, the energy transport is mainly turbulent. In order to increase the fusion reactions rate, it is needed to improve the energy confinement. The present work is dedicated to the identification of the key parameters leading to plasmas with a better confined energy in order to guide the future experiments. For this purpose, a numerical code has been developed. It calculates the growth rates characterizing the instabilities onset. The stability analysis is completed by the evaluation of the shearing rate of the rotation due to the radial electric field. When this shearing rate is greater than the growth rate the ion turbulence is fully stabilised. The shearing rate and the growth rate are determined from the density, temperature and security factor profiles of a given plasma. Three types of plasmas have been analysed. In the Radiative Improved modes of TEXTOR, high charge number ions seeding lowers the growth rates. In Tore Supra-high density plasmas, a strong magnetic shear and/or a more efficient ion heating linked to a bifurcation of the toroidal rotation direction (which is not understood) trigger the improvement of the confinement. In other Tore Supra plasmas, locally steep electron pressure gradients have been obtained following magnetic shear reversal. This locally negative magnetic shear has a stabilizing effect. In these three families of plasmas, the growth rates decrease, the confinement improves, the density and temperature profiles are steeper. This steepening induces an increase of the rotation shearing rate, which then maintains the confinement high quality. (author)
Ionization balance in EBIT and tokamak plasmas
Peacock, N. J.; Barnsley, R.; O'Mullane, M. G.; Tarbutt, M. R.; Crosby, D.; Silver, J. D.; Rainnie, J. A.
2001-01-01
The equilibrium state in tokamak core plasmas has been studied using the relative intensities of resonance x-ray lines, for example Lyα (H-like), "w" (He-like), and "q" (Li-like) from test ions such as Ar+15, Ar+16, and Ar+17. A full spatial analysis involves comparison of the line intensities with ion diffusion calculations, including relevant atomic rates. A zero-dimensional model using a global ion loss rate approximation has also been demonstrated by comparison with the data collected from a Johann configuration spectrometer with a charged coupled device (CCD) detector. Since the lines are nearly monoenergetic, their intensities are independent of the instrument sensitivity and are directly proportional to the ion abundances. This method has recently been applied to Ar in the Oxford electron beam ion trap (EBIT) with a beam energy in the range 3-10 keV. Taking into account the cross sections for monoenergetic electron collisions and polarization effects, model calculations agree with the observed line ratios at 4.1 keV beam energy. This work will be expanded to provide nomograms of ionization state versus line intensity ratios as a function of EBIT beam energy.
Current drive in spherical tokamak plasmas
International Nuclear Information System (INIS)
Storer, R.
1999-01-01
The early experiments on a spherical rotamak showed that a rotating magnetic field could be used to drive substantial currents and create a compact torus magnetic field configuration. The theoretical analysis of the spherical rotamak has been essentially confined to this class. Recent experiments on the Flinders Rotamak-ST have included a toroidal field, produced by a current-carrying central rod, with encouraging results; for it has been shown that an enhanced current can be driven with this configuration which is the equivalent of a spherical tokamak. This paper will be devoted to a theoretical and computational analysis of this situation. We use a model where the rotating magnetic field is applied to a spherical plasma, with the rotating field oriented parallel to the equatorial plane, taken to be the x-y plane. In our model the ions form a uniform background and the frequency of the rotating Held is very much less than the electron cyclotron frequency (with respect to the rotating field strength) and very much greater than the ion cyclotron frequency. This condition is satisfied by the rotamak experiments
Diagnosing transient plasma status: from solar atmosphere to tokamak divertor
International Nuclear Information System (INIS)
Giunta, A.S.; Henderson, S.; O'Mullane, M.; Summers, H.P.; Harrison, J.; Doyle, J.G.
2016-01-01
This work strongly exploits the interdisciplinary links between astrophysical (such as the solar upper atmosphere) and laboratory plasmas (such as tokamak devices) by sharing the development of a common modelling for time-dependent ionisation. This is applied to the interpretation of solar flare data observed by the UVSP (Ultraviolet Spectrometer and Polarimeter), on-board the Solar Maximum Mission and the IRIS (Interface Region Imaging Spectrograph), and also to data from B2-SOLPS (Scrape Off Layer Plasma Simulations) for MAST (Mega Ampère Spherical Tokamak) Super-X divertor upgrade. The derived atomic data, calculated in the framework of the ADAS (Atomic Data and Analysis Structure) project, allow equivalent prediction in non-stationary transport regimes and transients of both the solar atmosphere and tokamak divertors, except that the tokamak evolution is about one thousand times faster.
Scaling for scrape-off layer plasma in tokamak
International Nuclear Information System (INIS)
Shimomura, Yasuo; Maeda, Hikosuke; Kimura, Haruyuki; Azumi, Masashi; Odajima, Kazuo
1977-12-01
Scaling for a scrape-off layer plasma in a tokamak is obtained by using DIVA (JFT-2a). The scaling gives the average electron temperature, the width and the mean electron density of the scrape-off layer. The temperature at the edge will be high in a future large tokamak with a small energy-loss by charge-exchange and radiation. The scrape-off layer plasma can easily shield the impurity influx from the wall. The fuel, however, can easily penetrate into the main plasma. (auth.)
Reconstruction of plasma current profile of Tokamaks using genetic algorithm
International Nuclear Information System (INIS)
Kishimoto, Maki
1996-01-01
A new method to reconstruct plasma shape and plasma current distribution from magnetic measurements using a combinatorial optimization technique are proposed. The reconstruction of plasma current profile from magnetic measurements is regarded as an optimum allocation problem of currents into cross section of the vacuum vessel of the Tokamak. In order to solve this optimization problem, we use a genetic algorithm. The effectiveness of this method is shown by the application of this technique to JT-60U plasmas. (author)
Internal magnetic field measurement in tokamak plasmas using a ...
Indian Academy of Sciences (India)
Abstract. In a tokamak plasma, the poloidal magnetic field profile closely depends on the current density profile. We can deduce the internal magnetic field from the analysis of circular polarization of the spectral lines emitted by the plasma. The theory of the measurement and a detailed design of the Zeeman polarimeter ...
Turbulent ion heating in TCV Tokamak plasmas
International Nuclear Information System (INIS)
Schlatter, Ch.
2009-08-01
The Tokamak à configuration variable (TCV) features the highest electron cyclotron wave power density available to resonantly heat (ECRH) the electrons and to drive noninductive currents in a fusion grade plasma (ECCD). In more than 15 years of exploitation, much effort has been expended on real and velocity space engineering of the plasma electron energy distribution function and thus making electron physics a major research contribution of TCV. When a plasma was first subjected to ECCD, a surprising energisation of the ions, perpendicular to the confining magnetic field, was observed on the charge exchange spectrum measured with the vertical neutral particle analyser (VNPA). It was soon concluded that the ion acceleration was not due to power equipartition between electrons and ions, which, due to the absence of direct ion heating on TCV, has thus far been considered as the only mechanism heating the ions. However, although observed for more than ten years, little attention was paid to this phenomenon, whose cause has remained unexplained to date. The key subject of this thesis is the experimental study of this anomalous ion acceleration, the characterisation in terms of relevant parameters and the presentation of a model simulation of the potential process responsible for the appearance of fast ions. The installation of a new compact neutral particle analyser (CNPA) with an extended high energy range (≥ 50 keV) greatly improved the fast ion properties diagnosis. The CNPA was commissioned and the information derived from its measurement (ion temperature and density, isotopic plasma composition) was validated against other ion diagnostics, namely the active carbon charge exchange recombination spectroscopy system (CXRS) and a neutron counter. In ohmic plasmas, where the ion heating agrees with classical theory, the radial ion temperature profile was successfully reconstructed by vertically displacing the plasma across the horizontal CNPA line of sight. Active
Study of intelligent system for control of the tokamak-ETE plasma positioning
International Nuclear Information System (INIS)
Barbosa, Luis Filipe de Faria Pereira Wiltgen
2003-01-01
The development of an intelligent neural control system of the neural type, capable to perform real time control of the plasma displacement in the experiment tokamak spheric - ETE (spherical tokamak experiment ) is presented. The ETE machine is in operation since Nov 2000, in the LAP - Plasma Associated Laboratory of the Brazilian Institute on Spatial Research (INPE) in Sao Jose dos Campos, S P, Brazil. The experiment is dedicated to study the magnetic confinement of a fusion plasma in a configuration favorable for the construction of future reactors. Nuclear fusion constitutes a renewable energy source with low environmental impact, which uses atomic energy in pacific applications for the sustainable development of humanity. One of the important questions for the attainment of fusion relates to the stability of the plasma and control of its position during the reactor operation. Therefore, the development of systems to control the plasma in tokamaks constitutes a necessary technological advance for the feasibility of nuclear fusion. In particular, the research carried out in this thesis concerns the proposal of a system to control the vertical displacement of the plasma in the ETE tokamak, aiming to obtain steady pulses in this machine. A Magnetic Levitation system (Mag Lev) was developed as part of this work, allowing to study the nonlinear behavior of a device that, from the aspect of position control, is similar (analogous) to the plasma in the ETE tokamak, This magnetic levitation system was designed, mathematically modeled and built in order to test both classical and intelligent type controllers. The results of this comparison are very promising for the use of intelligent controllers in the ETE tokamak as well as other control applications. (author)
Kinetic modelling of runaway electron avalanches in tokamak plasmas.
Czech Academy of Sciences Publication Activity Database
Nilsson, E.; Decker, J.; Peysson, Y.; Granetz, R.S.; Saint-Laurent, F.; Vlainic, Milos
2015-01-01
Roč. 57, č. 9 (2015), č. článku 095006. ISSN 0741-3335 EU Projects: European Commission(XE) 633053 - EUROfusion Institutional support: RVO:61389021 Keywords : plasma physics * runaway electrons * knock-on collisions * tokamak * Fokker-Planck * runaway avalanches Subject RIV: BL - Plasma and Gas Discharge Physics OBOR OECD: Fluids and plasma physics (including surface physics) Impact factor: 2.404, year: 2015
Measurements of ion energies in the tokamak plasma boundary
Czech Academy of Sciences Publication Activity Database
Kocan, M.; Gunn, J. P.; Carpentier-Chouchana, S.; Herrmann, A.; Kirk, A.; Komm, Michael; Müller, H.W.; Pascal, J.Y.; Pitts, R.A.; Rohde, V.; Tamain, P.
2011-01-01
Roč. 415, č. 1 (2011), S1133-S1138 ISSN 0022-3115. [International Conference on Plasma-Surface Interactions in Controlled Fusion Devices (PSI)/19./. San Diego, CA, 24.05.2010-28.05.2010] Institutional support: RVO:61389021 Keywords : plasma * tokamak * scrape-off layer Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 2.052, year: 2011 http://www.sciencedirect.com/science/article/pii/S0022311510004277#
Negative edge plasma currents in the SINP tokamak
Indian Academy of Sciences (India)
conditions. In the ohmic discharges of the SINP tokamak, we observed 'negative edge plasma currents' at the edge region (r/a ∼ 0.7–0.8, where a = 7.5 cm is the ... The horizontal plasma column (figure 1c) is observed to move inwards/ ... (b) 3 by 3 NaI(Tl) output (HX) in MeV, (c) horizontal plasma column motion ( hor).
Advanced probes for edge plasma diagnostics on the CASTOR tokamak
Czech Academy of Sciences Publication Activity Database
Stöckel, Jan; Adámek, Jiří; Balan, P.; Hronová-Bilyková, Olena; Brotánková, Jana; Dejarnac, Renaud; Devynck, P.; Ďuran, Ivan; Gunn, J. P.; Hron, Martin; Horáček, Jan; Ionita, C.; Kocan, M.; Martines, E.; Pánek, Radomír; Peleman, P.; Schrittwieser, R.; Van Oost, G.; Žáček, František
2006-01-01
Roč. 63, č. 0 (2006), 012001-012002 E-ISSN 1742-6596. [SECOND INTERNATIONAL WORKSHOP AND SUMMER SCHOOL ON PLASMA PHYSICS. Kiten, 03.07.2006-09.07.2006] R&D Projects: GA AV ČR KJB100430504 Institutional research plan: CEZ:AV0Z20430508 Keywords : plasma * tokamak * electric probe s * diagnostics Subject RIV: BL - Plasma and Gas Discharge Physics
Edge Plasma Physics and Relevant Diagnostics on the CASTOR tokamak
Czech Academy of Sciences Publication Activity Database
Stöckel, Jan; Devynck, P.; Gunn, J.; Martines, E.; Bonhomme, G.; Van Oost, G.; Hron, Martin; Ďuran, Ivan; Pánek, Radomír; Stejskal, Pavel; Adámek, Jiří
2004-01-01
Roč. 3, - (2004), s. 1-6 ISSN 1433-5581. [First Cairo Conference on Plasma Physics & Applications. Cairo, 11.10.2003-15.10.2003] R&D Projects: GA ČR GA202/03/0786; GA ČR GP202/03/P062 Keywords : tokamak * edge plasma * probe diagnostics * biasing * turbulence * polarization Subject RIV: BL - Plasma and Gas Discharge Physics
Energy Technology Data Exchange (ETDEWEB)
Svoboda, V., E-mail: svoboda@fjfi.cvut.cz [Faculty of Nuclear Sciences and Physical Engineering CTU Prague, CZ-115 19 (Czech Republic); Kocman, J.; Grover, O. [Faculty of Nuclear Sciences and Physical Engineering CTU Prague, CZ-115 19 (Czech Republic); Krbec, J.; Stöckel, J. [Faculty of Nuclear Sciences and Physical Engineering CTU Prague, CZ-115 19 (Czech Republic); Institute of Plasma Physics AS CR, CZ-182 21 Prague (Czech Republic)
2015-10-15
Graphical abstract: * Understandable remote operation of a vertical plasma position control system in the tokamak GOLEM for educational purposes.* Two combinable modes of real-time plasma position control: position based feedback and a pre-defined waveform.* More than 20% plasma life prolongation with plasma position control in feedback mode. - Highlights: • Understandable remote operation of a vertical plasma position control system in the tokamak GOLEM for educational purposes. • Two combinable modes of real-time plasma position control: position based feedback and a pre-defined waveform. • More than 20% plasma life prolongation with plasma position control in feedback mode. - Abstract: The GOLEM tokamak at the Czech Technical University has been established as an educational tokamak device for domestic and foreign students. Remote participation in the scope of several laboratory practices, plasma physics schools and workshops has been successfully performed from abroad. A new enhancement allowing understandable remote control of vertical plasma position in two modes (i) predefined and (ii) feedback control is presented. It allows to drive the current in the stabilization coils in any time-dependent scenario, which can include as a parameter the actual plasma position measured by magnetic diagnostics. Arbitrary movement of the plasma column in a vertical direction, stabilization of the plasma column in the center of the tokamak vessel as well as prolongation/shortening of plasma life according to the remotely defined request are demonstrated.
Nonlinear MHD simulations of spherical tokamak and helical plasmas
Energy Technology Data Exchange (ETDEWEB)
Hayashi, T.; Mizuguchi, N.; Miura, H.; Kanno, R.; Nakajima, N.; Okamoto, M. [National Inst. for Fusion Science, Toki, Gifu (Japan)
2002-11-01
Nonlinear magnetohydrodynamic (MHD) simulations on relaxation phenomena in a spherical tokamak and a helical plasma, including three-dimensional (3D) equilibrium computations, are executed in full toroidal geometries. For a spherical tokamak, two-step evolution of the medium-n ballooning instabilities and a successive excitation of an internal n=1 crash has been observed. A similar process has been observed in an actual tokamak experiment of TFTR. The process is compared with a previous simulation for another MHD activity that is called the internal reconnection event (IRE). Three dimensional equilibrium code HINT is modified to extend functions, by which an n=1 island structure used for the local island diverter (LID) experiment in the LHD device is analyzed in finite pressure equilibria. Nonlinear simulations are executed for LHD plasma and pressure deformation due to evolution of m=2/n=1 pressure driven mode is observed, which has larger growth rate and saturation level than medium-n ballooning modes. (author)
Trapping of gun-injected plasma by a tokamak
International Nuclear Information System (INIS)
Leonard, A.W.; Dexter, R.N.; Sprott, J.C.
1987-01-01
It has been seen that a plasma produced by a Marshall gun can be injected into and trapped by a tokamak plasma. This trapping of a gun-injected plasma is explained in terms of a depolarization current mechanism. A model is developed that describes the slowing of a plasma beam crossing into the magnetic field of a tokamak. The slowing down time is shown to go as tau/sub s/proportionalT/sup 3/2//sub e/L 2 /n/sub b/α 2 0 , where n/sub b/ and T/sub e/ are the density and temperature of the plasma beam and α 0 /L is the pitch of the field lines per unit length in the direction in which the beam is traveling. Experimental tests of this model are consistent with the scaling predictions
Trapping of gun-injected plasma by a tokamak
International Nuclear Information System (INIS)
Leonard, A.W.; Dexter, R.N.; Sprott, J.C.
1986-10-01
It is shown that a plasma produced by a Marshall gun can be injected into and trapped by a tokamak plasma. Gun injection raises the line-averaged density and peaks the density profile. Trapping of the gun-injected plasma is explainable in terms of a depolarization current mechanism. A model is developed which describes the slowing of a plasma beam crossing into the magnetic field of a tokamak. The slowing down time is shown to go as tau/sub s/ ∞ n -1 /sub b/T 3 /sub e/(α 0 /L) 2 , where n/sub b/ and T/sub e/ are the density and temperature of the plasma beam and α 0 /L is the pitch of the field lines per unit length in the direction in which the beam is traveling. Experimental tests of this model are consistent with the scaling predictions
Experimental methods to study tokamak plasma stability
International Nuclear Information System (INIS)
Perez-Navarro, A.
1978-01-01
Experimental devices to measure external instability modes with small pick-up coils to detect poloidal magnetic field fluctuations, and internal modes with soft-X-ray detectors are discussed. The characteristics of these devices are calculated for a small tokamak (R 0 = 30 cm, a = 10 cm, I 0 50 KA). (author)
[High beta tokamak research and plasma theory
International Nuclear Information System (INIS)
1990-01-01
Our activities on High Beta Tokamak Research during the past 12 months of the present budget period can be divided into four areas: completion of kink mode studies in HBT; completion of carbon impurity transport studies in HBT; design of HBT-EP; and construction of HBT-EP. Each of these is described briefly in the sections of this progress report
Near-wall plasma in a tokamak thermonuclear reactor
International Nuclear Information System (INIS)
Pistunovich, V.I.
1991-01-01
The development of thermonuclear reactor projects such as the national ones GTRT and OTR (USSR), UWMAK-NUMAK and TIBER (USA), NET (Euratom), FER (Japan), as well as the international ones INTOR and JET allows one to determine in detail the problems arising in the creation of a reactor. One of these problems is extracting heat and particles from the reactor and removing thermonuclear reaction ash, which in the case of a DT reactor is helium. The solution of this problem is connected with the investigation of interaction processes of the plasma with the materials from which the reactor is constructed. Progress in studying the interaction of plasma with a material surface has given rise to a new division of plasma physics, which includes not only reactor problems, but also plasma-physical processes occurring in the region between the hot plasma and the first wall. Experiments on tokamaks have shown that the phenomena occurring in the wall plasma and in the hot zone of the tokamak once strongly correlated. In and number of regimes the confinement of the hot plasma is determined by the conditions in the peripheral region. A survey of the near-well plasma problem in a tokamak thermonuclear reactor is given. The results of recent investigations are presented, and the status of the problem as applied to the ITER reactor project is described
International Nuclear Information System (INIS)
Yamazaki, K.; Uemura, S.; Oishi, T.; Arimoto, H.; Shoji, T.; Garcia, J.
2009-01-01
Reference 1-GWe DT reactors (tokamak TR-1, spherical tokamak ST-1 and helical HR-1 reactors) are designed using physics, engineering and cost (PEC) code, and their plasma behaviours with internal transport barrier operations are analysed using toroidal transport analysis linkage (TOTAL) code, which clarifies the requirement of deep penetration of pellet fuelling to realize steady-state advanced burning operation. In addition, economical and environmental assessments were performed using extended PEC code, which shows the advantage of high beta tokamak reactors in the cost of electricity (COE) and the advantage of compact spherical tokamak in life-cycle CO 2 emission reduction. Comparing with other electric power generation systems, the COE of the fusion reactor is higher than that of the fission reactor, but on the same level as the oil thermal power system. CO 2 reduction can be achieved in fusion reactors the same as in the fission reactor. The energy payback ratio of the high-beta tokamak reactor TR-1 could be higher than that of other systems including the fission reactor.
Internal magnetic field measurement in tokamak plasmas using a ...
Indian Academy of Sciences (India)
Abstract. In a tokamak plasma, the poloidal magnetic field profile closely depends on the current density profile. ... Transitions between the energy levels that are split by the magnetic field give rise to several components of a spectral ... train of charged pulses having an amplitude proportional to the light intensity sensed by.
Modelling multi-ion plasma gun simulations of Tokamak disruptions
International Nuclear Information System (INIS)
Ehst, D.A.
1995-08-01
The effect of impurity ions in plasma gun ablation tests of various targets is considered. Inclusion of reasonable amounts of impurity (∼10%) is adequate to explain observed energy transmission and erosion measurements. The gun tests and the computer code calculations are relevant to the parameter range expected for major disruptions on large tokamaks
Neural net prediction of tokamak plasma disruptions
International Nuclear Information System (INIS)
Hernandez, J.V.; Lin, Z.; Horton, W.; McCool, S.C.
1994-10-01
The computation based on neural net algorithms in predicting minor and major disruptions in TEXT tokamak discharges has been performed. Future values of the fluctuating magnetic signal are predicted based on L past values of the magnetic fluctuation signal, measured by a single Mirnov coil. The time step used (= 0.04ms) corresponds to the experimental data sampling rate. Two kinds of approaches are adopted for the task, the contiguous future prediction and the multi-timescale prediction. Results are shown for comparison. Both networks are trained through the back-propagation algorithm with inertial terms. The degree of this success indicates that the magnetic fluctuations associated with tokamak disruptions may be characterized by a relatively low-dimensional dynamical system
Problems with the concept of plasma equilibrium in tokamaks
International Nuclear Information System (INIS)
Carreras, B.A.
1992-01-01
The equilibrium condition for a magnetically confined plasma in normally formulated in terms of macroscopic equations. In these equations, the plasma pressure is assumed to be a function of the magnetic flux with continuous derivatives. However, in three- dimensional systems this is not necessarily the case. Here, we look at the case of an intrinsically three-dimensional realistic tokamak, and we discuss the possible interconnection between the equilibrium and anomalous transport
Influence of the plasma edge on tokamak performance
International Nuclear Information System (INIS)
Wilson, H.R.; Connor, J.W.; Field, A.R.; Fielding, S.J.; Hastie, R.J.; Taylor, J.B.; Miller, R.L.
2001-01-01
A number of edge plasma physics phenomena are considered to determine tokamak performance: transport barrier, edge magneto-hydrodynamic (MHD) instabilities, plasma flow. These phenomena are thought to be causally related: a spontaneous increase in the plasma flow (actually, its radial variation) suppresses heat and particle fluxes at the plasma edge, to form a transport barrier; the edge pressure gradient steepens until limited by MHD instabilities, resulting in a temperature pedestal at the top of the steep gradient region; a number of core transport models predict enhanced confinement for higher values of the temperature pedestal. This paper examines these phenomena and their interaction. (author)
Influence of the plasma edge on tokamak performance
International Nuclear Information System (INIS)
Wilson, H.R.; Connor, J.W.; Field, A.R.; Fielding, S.J.; Hastie, R.J.; Taylor, J.B.; Miller, R.L.
1999-01-01
A number of edge plasma physics phenomena are considered to determine tokamak performance: transport barrier, edge magneto-hydrodynamic (MHD) instabilities, plasma flow. These phenomena are thought to be causally related: a spontaneous increase in the plasma flow (actually, its radial variation) suppresses heat and particle fluxes at the plasma edge, to form a transport barrier; the edge pressure gradient steepens until limited by MHD instabilities, resulting in a temperature pedestal at the top of the steep gradient region; a number of core transport models predict enhanced confinement for higher values of the temperature pedestal. This paper examines these phenomena and their interaction. (author)
Fusion Plasma Theory: Task 3, Auxiliary radiofrequency heating of tokamaks
Energy Technology Data Exchange (ETDEWEB)
Scharer, J.E.
1992-01-01
The research performed under this grant during the past year has been concentrated on the following several key tokamak ICRF (Ion Cyclotron Range of Frequencies) coupling, heating and current drive issues: Efficient coupling during the L- to H- mode transition by analysis and computer simulation of ICRF antennas; analysis of ICRF cavity-backed coil antenna coupling to plasma edge profiles including fast and ion Bernstein wave coupling for heating and current drive; benchmarking the codes to compare with current JET, D-IIID and ASDEX experimental results and predictions for advanced tokamaks such as BPX and SSAT (Steady-State Advanced Tokamak); ICRF full-wave field solutions, power conservation, heating analyses and minority ion current drive; and the effects of fusion alpha particle or ion tail populations on the ICRF absorption. Research progress, publications, and conference and workshop presentations are summarized in this report.
International Nuclear Information System (INIS)
Federici, G.; Skinner, C.H.; Brooks, J.N.
2001-01-01
The major increase in discharge duration and plasma energy in a next step DT fusion reactor will give rise to important plasma-material effects that will critically in influence its operation, safety and performance. Erosion will increase to a scale of several centimetres from being barely measurable at a micron scale in today's tokamaks. Tritium co-deposited with carbon will strongly affect the operation of machines with carbon plasma facing components. Controlling plasma-wall interactions is critical to achieving high performance in present day tokamaks, and this is likely to continue to be the case in the approach to practical fusion reactors. Recognition of the important consequences of these phenomena stimulated an internationally co-ordinated effort in the part of plasma-surface interactions supporting the Engineering Design Activities of the International Thermonuclear Experimental Reactor project (ITER), and significant progress has been made in better understanding these issues. The paper reviews the underlying physical processes and the existing experimental database of plasma-material inter actions both in tokamaks and laboratory simulation facilities for conditions of direct relevance to next step fusion reactors. Two main topical groups of interaction are considered: (i) erosion/redeposition from plasma sputtering and disruptions, including dust and flake generation and (ii) tritium retention and removal. The use of modelling tools to interpret the experimental results and make projections for conditions expected in future devices is explained. Outstanding technical issues and specific recommendations on potential R and D avenues for their resolution are presented. (author)
Plasma diagnostics at Aditya Tokamak by two views visible light tomography
International Nuclear Information System (INIS)
Goswami, Mayank; Munshi, Prabhat; Saxena, Anupam; Kumar, Manoj; Kumar, Ajai
2014-01-01
Graphical abstract: - Highlights: • Improved algorithm works equally well for central as well as for peripherical plasma regions. • Entropy optimized smoothening parameters eliminate user dependencies. • Real time fusion grade plasma diagnostics images. - Abstract: This visible light computerized tomography exercise is a part of a project to establish an auxiliary imaging method to assist other imaging facilities at the Institute of Plasma Research (IPR), India. Space constraints around Aditya Tokamak allow only two orthogonal ports. Each port has one detector array (64 sensors) sensitive to the visual spectrum emitted by H α emission. The objective here is to report the developments on limited view tomography for hot plasma imaging. Spatially filtered entropy maximization algorithm with non-uniform discretization grids is employed. Estimation of unique kernel smoothening parameters (mask size and exponent factor) depends on entropy function and projection data. It removes requirement of any arbitrary/user-based decision for choosing a regularization factor thus minimizes the chance for biasedness or errors. Synthetic projection data is used to analyse the performance of this modification. The error band in the process of recovery remains under acceptable level (less than 15%) irrespective of the origin of the emissions from the core. Reconstructed hot plasma images/profiles from Aditya Tokamak are shown. These profiles may improve the current understanding about (a) plasma–wall interaction or edge plasma turbulence, (b) control and generation of plasma and (c) correlations between theoretical and engineering advancements in Tokamak reactors
Features of self-organized plasma physics in tokamaks
Razumova, K. A.
2018-01-01
The history of investigations the role of self-organization processes in tokamak plasma confinement is presented. It was experimentally shown that the normalized pressure profile is the same for different tokamaks. Instead of the conventional Fick equation, where the thermal flux is proportional to a pressure gradient, processes in the plasma are well described by the Dyabilanin’s energy balance equation, in which the heat flux is proportional to the difference of normalized gradients for self-consistent and real pressure profiles. The transport coefficient depends on the values of heat flux, which compensates distortion of the pressure profile with external impacts. Radiative cooling of the plasma edge decreases the heat flux and improves the confinement.
Pseudo-MHD ballooning modes in tokamak plasmas
International Nuclear Information System (INIS)
Callen, J.D.; Hegna, C.C.
1996-08-01
The MHD description of a plasma is extended to allow electrons to have both fluid-like and adiabatic-regime responses within an instability eigenmode. In the resultant open-quotes pseudo-MHDclose quotes model, magnetic field line bending is reduced in the adiabatic electron regime. This makes possible a new class of ballooning-type, long parallel extent, MHD-like instabilities in tokamak plasmas for α > s 2 (2 7/3 /9) (r p /R 0 ) or-d√Β/dr > (2 1/6 /3)(s/ R 0q ), which is well below the ideal-MHD stability boundary. The marginally stable pressure profile is similar in both magnitude and shape to that observed in ohmically heated tokamak plasmas
Automation of Aditya tokamak plasma position control DC power supply
Energy Technology Data Exchange (ETDEWEB)
Arambhadiya, Bharat, E-mail: bharat@ipr.res.in; Raj, Harshita; Tanna, R.L.; Edappala, Praveenlal; Rajpal, Rachana; Ghosh, Joydeep; Chattopadhyay, P.K.; Kalal, M.B.
2016-11-15
Highlights: • Plasma position control is very essential for obtaining repeatable high temperature, high-density discharges of longer durations in tokomak. • The present capacitor bank has limitations of maximum current capacity and position control beyond 200 ms. • The installation of a separate set of coils and a DC power supply can control the plasma position beyond 200 ms. • A high power thyristor (T588N1200) triggers for DC current pulse of 300 A fires precisely at required positions to modify plasma position. • The commissioning is done for the automated in-house, quick and reliable solution. - Abstract: Plasma position control is essential for obtaining repeatable high temperature, high-density discharges of longer duration in tokamaks. Recently, a set of external coils is installed in the vertical field mode configuration to control the radial plasma position in ADITYA tokamak. The existing capacitor bank cannot provide the required current pulse beyond 200 ms for position control. This motivated to have a DC power supply of 500 A to provide current pulse beyond 200 ms for the position control. The automatization of the DC power supply mandated interfaces with the plasma control system, Aditya Pulse Power supply, and Data acquisition system for coordinated discharge operation. A high current thyristor circuit and a timer circuit have been developed for controlling the power supply automatically for charging vertical field coils of Aditya tokamak. Key protection interlocks implemented in the development ensure machine and occupational safety. Fiber-optic trans-receiver isolates the power supply with other subsystems, while analog channel is optically isolated. Commissioning and testing established proper synchronization of the power supply with tokamak operation. The paper discusses the automation of the DC power supply with main circuit components, timing control, and testing results.
High density plasma heating in the Tokamak à configuration variable
International Nuclear Information System (INIS)
Curchod, L.
2011-04-01
The Tokamak à Configuration Variable (TCV) is a medium size magnetic confinement thermonuclear fusion experiment designed for the study of the plasma performances as a function of its shape. It is equipped with a high power and highly flexible electron cyclotron heating (ECH) and current drive (ECCD) system. Up to 3 MW of 2 nd harmonic EC power in ordinary (O 2 ) or extraordinary (X 2 ) polarization can be injected from TCV low-field side via six independently steerable launchers. In addition, up to 1.5 MW of 3 rd harmonic EC power (X 3 ) can be launched along the EC resonance from the top of TCV vacuum vessel. At high density, standard ECH and ECCD are prevented by the appearance of a cutoff layer screening the access to the EC resonance at the plasma center. As a consequence, less than 50% of TCV density operational domain is accessible to X 2 and X 3 ECH. The electron Bernstein waves (EBW) have been proposed to overcome this limitation. EBW is an electrostatic mode propagating beyond the plasma cutoff without upper density limit. Since it cannot propagate in vacuum, it has to be excited by mode conversion of EC waves in the plasma. Efficient electron Bernstein waves heating (EBH) and current drive (EBCD) were previously performed in several fusion devices, in particular in the W7-AS stellarator and in the MAST spherical tokamak. In TCV, the conditions for an efficient O-X-B mode conversion (i.e. a steep density gradient at the O 2 plasma cutoff) are met at the edge of high confinement (H-mode) plasmas characterized by the appearance of a pedestal in the electron temperature and density profiles. TCV experiments have demonstrated the first EBW coupling to overdense plasmas in a medium aspect-ratio tokamak via O-X-B mode conversion. This thesis work focuses on several aspects of ECH and EBH in low and high density plasmas. Firstly, the experimental optimum angles for the O-X-B mode conversion is successfully compared to the full-wave mode conversion calculation
Sawtooth driven particle transport in tokamak plasmas
International Nuclear Information System (INIS)
Nicolas, T.
2013-01-01
The radial transport of particles in tokamaks is one of the most stringent issues faced by the magnetic confinement fusion community, because the fusion power is proportional to the square of the pressure, and also because accumulation of heavy impurities in the core leads to important power losses which can lead to a 'radiative collapse'. Sawteeth and the associated periodic redistribution of the core quantities can significantly impact the radial transport of electrons and impurities. In this thesis, we perform numerical simulations of sawteeth using a nonlinear tridimensional magnetohydrodynamic code called XTOR-2F to study the particle transport induced by sawtooth crashes. We show that the code recovers, after the crash, the fine structures of electron density that are observed with fast-sweeping reflectometry on the JET and TS tokamaks. The presence of these structure may indicate a low efficiency of the sawtooth in expelling the impurities from the core. However, applying the same code to impurity profiles, we show that the redistribution is quantitatively similar to that predicted by Kadomtsev's model, which could not be predicted a priori. Hence finally the sawtooth flushing is efficient in expelling impurities from the core. (author) [fr
Turbulent and neoclassical toroidal momentum transport in tokamak plasmas
International Nuclear Information System (INIS)
Abiteboul, J.
2012-10-01
The goal of magnetic confinement devices such as tokamaks is to produce energy from nuclear fusion reactions in plasmas at low densities and high temperatures. Experimentally, toroidal flows have been found to significantly improve the energy confinement, and therefore the performance of the machine. As extrinsic momentum sources will be limited in future fusion devices such as ITER, an understanding of the physics of toroidal momentum transport and the generation of intrinsic toroidal rotation in tokamaks would be an important step in order to predict the rotation profile in experiments. Among the mechanisms expected to contribute to the generation of toroidal rotation is the transport of momentum by electrostatic turbulence, which governs heat transport in tokamaks. Due to the low collisionality of the plasma, kinetic modeling is mandatory for the study of tokamak turbulence. In principle, this implies the modeling of a six-dimensional distribution function representing the density of particles in position and velocity phase-space, which can be reduced to five dimensions when considering only frequencies below the particle cyclotron frequency. This approximation, relevant for the study of turbulence in tokamaks, leads to the so-called gyrokinetic model and brings the computational cost of the model within the presently available numerical resources. In this work, we study the transport of toroidal momentum in tokamaks in the framework of the gyrokinetic model. First, we show that this reduced model is indeed capable of accurately modeling momentum transport by deriving a local conservation equation of toroidal momentum, and verifying it numerically with the gyrokinetic code GYSELA. Secondly, we show how electrostatic turbulence can break the axisymmetry and generate toroidal rotation, while a strong link between turbulent heat and momentum transport is identified, as both exhibit the same large-scale avalanche-like events. The dynamics of turbulent transport are
International Nuclear Information System (INIS)
Saito, T.; Hamada, Y.; Yamashita, T.; Ikeda, M.; Nakamura, M.
1980-01-01
The SMM wave laser scattering apparatus has been developed for the measurement of the waves and turbulences in the plasma. This apparatus will help greatly to clarify the physics of RF heating of the tokamak plasma. The present status of main parts of the apparatus, the SMM wave laser and the Schottky barrier diode mixer for the heterodyne receiver, are described. (author)
Plasma radiation in tokamak disruption simulation experiments
International Nuclear Information System (INIS)
Arkhipov, N.; Bakhtin, V.; Safronov, V.; Toporkov, D.; Vasenin, S.; Zhitlukhin, A.; Wuerz, H.
1995-01-01
Plasma impact results in sudden evaporation of divertor plate material and produces a plasma cloud which acts as a protective shield. The incoming energy flux is absorbed in the plasma shield and is converted mainly into radiation. Thus the radiative characteristics of the target plasma determine the dissipation of the incoming energy and the heat load at the target. Radiation of target plasma is studied at the two plasma gun facility 2MK-200 at Troitsk. Space- and time-resolved spectroscopy and time-integrated space-resolved calorimetry are employed as diagnostics. Graphite and tungsten samples are exposed to deuterium plasma streams. It is found that the radiative characteristics depend strongly on the target material. Tungsten plasma arises within 1 micros close to the surface and shows continuum radiation only. Expansion of tungsten plasma is restricted. For a graphite target the plasma shield is a mixture of carbon and deuterium. It expands along the magnetic field lines with a velocity of v = (3--4) 10 6 cm/s. The plasma shield is a two zone plasma with a hot low dense corona and a cold dense layer close to the target. The plasma corona emits intense soft x-ray (SXR) line radiation in the frequency range from 300--380 eV mainly from CV ions. It acts as effective dissipation system and converts volumetrically the incoming energy flux into SXR radiation
Plasma radiation in tokamak disruption simulation experiments
Energy Technology Data Exchange (ETDEWEB)
Arkhipov, N.; Bakhtin, V.; Safronov, V.; Toporkov, D.; Vasenin, S.; Zhitlukhin, A. [Troitsk Inst. for Innovation and Fusion Research (Russian Federation); Wuerz, H. [Forschungszentrum Karlsruhe (Germany)
1995-12-31
Plasma impact results in sudden evaporation of divertor plate material and produces a plasma cloud which acts as a protective shield. The incoming energy flux is absorbed in the plasma shield and is converted mainly into radiation. Thus the radiative characteristics of the target plasma determine the dissipation of the incoming energy and the heat load at the target. Radiation of target plasma is studied at the two plasma gun facility 2MK-200 at Troitsk. Space- and time-resolved spectroscopy and time-integrated space-resolved calorimetry are employed as diagnostics. Graphite and tungsten samples are exposed to deuterium plasma streams. It is found that the radiative characteristics depend strongly on the target material. Tungsten plasma arises within 1 {micro}s close to the surface and shows continuum radiation only. Expansion of tungsten plasma is restricted. For a graphite target the plasma shield is a mixture of carbon and deuterium. It expands along the magnetic field lines with a velocity of v = (3--4) 10{sub 6} cm/s. The plasma shield is a two zone plasma with a hot low dense corona and a cold dense layer close to the target. The plasma corona emits intense soft x-ray (SXR) line radiation in the frequency range from 300--380 eV mainly from CV ions. It acts as effective dissipation system and converts volumetrically the incoming energy flux into SXR radiation.
Plasma Sprayed Tungsten-based Coatings and their Usage in Edge Plasma Region of Tokamaks
Czech Academy of Sciences Publication Activity Database
Matějíček, Jiří; Weinzettl, Vladimír; Dufková, Edita; Piffl, Vojtěch; Peřina, Vratislav
2006-01-01
Roč. 51, č. 2 (2006), s. 179-191 ISSN 0001-7043 Grant - others:Evropská unie EFDA Task TW-5-TVM-PSW (EU – Euratom) Institutional research plan: CEZ:AV0Z20430508; CEZ:AV0Z10480505 Keywords : plasma sprayed coatings * fusion * plasma facing components * tungsten * tokamak Subject RIV: BL - Plasma and Gas Discharge Physics
TSC simulation of the ohmic discharges for the tokamak plasmas
International Nuclear Information System (INIS)
Li Jiaxian; Pan Yudong; Zhang Jihua
2010-01-01
TSC (Tokamak simulation Code) is a famous numerical simulation code in fusion research, which is developed by Princeton Plasma Physics Laboratory. The code has been used to provide the physics studies to support the design of the poloidal field system in the new tokamak in Southwestern of Institute of Physics (SWIP). These studies have been performed in some depth. We briefly summarize the analysis methods used, but concentrate on giving the key results. This work firstly confirmed the plasma configuration designed by the SWEQU and EFIT code. We presented the main results of standard ohmic discharge evolution of the new tokamak in SWIP. The real-time feedback control system has been combined which considering the plasma displacement control and the current control. The output physical parameters have been detailed analyzed in this thesis, which including the plasma magnetic axis evolution, current profile evoultion, loop voltage evolution, electron temperature profile evolution, ion temperature profile evolution, density profile, pressure profile and so on. These parameters may supply the benchmarch to future experimental diagnostic information. (authors)
Initial plasma production by induction electric field on QUEST tokamak
International Nuclear Information System (INIS)
Hasegawa, Makoto; Nakamura, Kazuo; Sato, Kohnosuke
2007-01-01
Induction electric field by center solenoid coil plays a roll to produce initial plasma. According to Townsend avalanche theory, minimum electric field for plasma breakdown depends on neutral gas pressure and connection length. On QUEST spherical tokamak, a connection length is evaluated as 966m on null point neighborhood with coil current ratio I PF26 /I CS =0.1, and induction electric field considering eddy current of vacuum vessel is evaluated as about 0.1 V/m on null point neighborhood. With Townsend avalanche theory, these values manage to produce initial plasma on QUEST. (author)
Plasma position control in SST1 tokamak
Indian Academy of Sciences (India)
Radial position control is also necessary for maintaining a predefined gap between plasma and lower hybrid wave launcher antenna for efficient coupling of the RF waves. The radial position of the plasma can change because of change in plasma beta and internal inductance. (henceforth referred to as ¬Ф +Р 2), due to ...
Heavy Neutral Beam Probe for Edge Plasma Analysis in Tokamaks
Energy Technology Data Exchange (ETDEWEB)
Castracane, J.
2001-01-04
The Heavy Neutral Beam Probe (HNBP) developed initially with DOE funding under the Small Business Innovation Research (SBIR) program was installed on the Tokamak de Varennes (TdeV) at the CCFM. This diagnostic was designed to perform fundamental measurements of edge plasma properties. The hardware was capable of measuring electron density and potential profiles with high spatial and temporal resolution. Fluctuation spectra for these parameters were obtained with HNBP for transport studies.
Heavy Neutral Beam Probe for Edge Plasma Analysis in Tokamaks
International Nuclear Information System (INIS)
Castracane, J.
2001-01-01
The Heavy Neutral Beam Probe (HNBP) developed initially with DOE funding under the Small Business Innovation Research (SBIR) program was installed on the Tokamak de Varennes (TdeV) at the CCFM. This diagnostic was designed to perform fundamental measurements of edge plasma properties. The hardware was capable of measuring electron density and potential profiles with high spatial and temporal resolution. Fluctuation spectra for these parameters were obtained with HNBP for transport studies
Plasma current profile during current reversal in a tokamak
International Nuclear Information System (INIS)
Huang Jianguo; Yang Xuanzong; Zheng Shaobai; Feng Chunhua; Zhang Houxian; Wang Long
1999-01-01
Alternating current operation with one full cycle and a current level of 2.5 kA have been achieved in the CT-6B tokamak. The poloidal magnetic field in the plasma is measured with two internal magnetic probes in repeated discharges. The current distribution is reconstructed with an inversion algorithm. The inverse current first appears on the weak field side. The existence of magnetic surfaces and rotational transform provide particle confinement in the current reversal phase
Multi-field plasma sandpile model in tokamaks and applications
Peng, X. D.; Xu, J. Q.
2016-08-01
A multi-field sandpile model of tokamak plasmas is formulated for the first time to simulate the dynamic process with interaction between avalanche events on the fast/micro time-scale and diffusive transports on the slow/macro time-scale. The main characteristics of the model are that both particle and energy avalanches of sand grains are taken into account simultaneously. New redistribution rules of a sand-relaxing process are defined according to the transport properties of special turbulence which allows the uphill particle transport. Applying the model, we first simulate the steady-state plasma profile self-sustained by drift wave turbulences in the Ohmic discharge of a tokamak. A scaling law as f = a q0 b + c for the relation of both center-density n ( 0 ) and electron (ion) temperatures T e ( 0 ) ( T i ( 0 ) ) with the center-safety-factor q 0 is found. Then interesting work about the nonlocal transport phenomenon observed in tokamak experiments proceeds. It is found that the core electron temperature increases rapidly in response to the edge cold pulse and inversely it decreases in response to the edge heat pulse. The results show that the nonlocal response of core electron temperature depending on the amplitudes of background plasma density and temperature is more remarkable in a range of gas injection rate. Analyses indicate that the avalanche transport caused by plasma drift instabilities with thresholds is a possible physical mechanism for the nonlocal transport in tokamaks. It is believed that the model is capable of being applied to more extensive questions occurring in the transport field.
Momentum Injection in Tokamak Plasmas and Transitions to Reduced Transport
International Nuclear Information System (INIS)
Parra, F. I.; Highcock, E. G.; Schekochihin, A. A.; Barnes, M.; Cowley, S. C.
2011-01-01
The effect of momentum injection on the temperature gradient in tokamak plasmas is studied. A plausible scenario for transitions to reduced transport regimes is proposed. The transition happens when there is sufficient momentum input so that the velocity shear can suppress or reduce the turbulence. However, it is possible to drive too much velocity shear and rekindle the turbulent transport. The optimal level of momentum injection is determined. The reduction in transport is maximized in the regions of low or zero magnetic shear.
Numerical studies of transport processes in Tokamak plasma
International Nuclear Information System (INIS)
Spineanu, F.; Vlad, M.
1984-09-01
The paper contains the summary of a set of studies of the transport processes in tokamak plasma, performed with a one-dimensional computer code. The various transport models (which are implemented by the expressions of the transport coefficients) are presented in connection with the regimes of the dynamical development of the discharge. Results of studies concerning the skin effect and the large scale MHD instabilities are also included
MTX [Microwave Tokamak Experiment] plasma diagnostic system
International Nuclear Information System (INIS)
Rice, B.W.; Hooper, E.B.; Brooksby, C.A.
1987-01-01
In this paper, a general overview of the MTX plasma diagnostics system is given. This includes a description of the MTX machine configuration and the overall facility layout. The data acquisition system and techniques for diagnostic signal transmission are also discussed. In addition, the diagnostic instruments planned for both an initial ohmic-heating set and a second FEL-heating set are described. The expected range of plasma parameters along with the planned plasma measurements will be reviewed. 7 refs., 5 figs
International Nuclear Information System (INIS)
1993-12-01
The long-range goal of the Numerical Tokamak Project (NTP) is the reliable prediction of tokamak performance using physics-based numerical tools describing tokamak physics. The NTP is accomplishing the development of the most advanced particle and extended fluid model's on massively parallel processing (MPP) environments as part of a multi-institutional, multi-disciplinary numerical study of tokamak core fluctuations. The NTP is a continuing focus of the Office of Fusion Energy's theory and computation program. Near-term HPCC work concentrates on developing a predictive numerical description of the core plasma transport in tokamaks driven by low-frequency collective fluctuations. This work addresses one of the greatest intellectual challenges to our understanding of the physics of tokamak performance and needs the most advanced computational resources to progress. We are conducting detailed comparisons of kinetic and fluid numerical models of tokamak turbulence. These comparisons are stimulating the improvement of each and the development of hybrid models which embody aspects of both. The combination of emerging massively parallel processing hardware and algorithmic improvements will result in an estimated 10**2--10**6 performance increase. Development of information processing and visualization tools is accelerating our comparison of computational models to one another, to experimental data, and to analytical theory, providing a bootstrap effect in our understanding of the target physics. The measure of success is the degree to which the experimentally observed scaling of fluctuation-driven transport may be predicted numerically. The NTP is advancing the HPCC Initiative through its state-of-the-art computational work. We are pushing the capability of high performance computing through our efforts which are strongly leveraged by OFE support
Improvement of confinement characteristics of tokamak plasma by controlling plasma-wall interactions
International Nuclear Information System (INIS)
Sengoku, Seio
1985-08-01
Relation between plasma-wall interactions and confinement characteristics of a tokamak plasma with respect to both impurity and fuel particle controls is discussed. Following results are obtained from impurity control studies: (1) Ion sputtering is the dominant mechanism of impurity release in a steady state tokamak discharge. (2) By applying carbon coating on entire first wall of DIVA tokamak, dominant radiative region is concentrated more in boundary plasma resulting a hot peripheral plasma with cold boundary plasma. (3) A physical model of divertor functions about impurity control is empilically obtained. By a computer simulation based on above model with respect to divertor functions for JT-60 tokamak, it is found that the allowable electron temperature of the divertor plasma is not restricted by a condition that the impurity release due to ion sputtering does not increase continuously. (4) Dense and cold divertor plasma accompanied with strong remote radiative cooling was diagnosed along the magnetic field line in the simple poloidal divertor of DOUBLET III tokamak. Strong particle recycling region is found to be localized near the divertor plate. by and from particle control studies: (1) The INTOR scaling on energy confinement time is applicable to high density region when a core plasma is fueled directly by solid deuterium pellet injection in DOUBLET III tokamak. (2) As remarkably demonstrated by direct fueling with pellet injection, energy confinement characteristics can be improved at high density range by decreasing particle deposition at peripheral plasma in order to reduce plasma-wall interaction. (3) If the particle deposition at boundary layer is necessarily reduced, the electron temperature at the boundary or divertor region increases due to decrease of the particle recycling and the electron density there. (J.P.N.)
Surface temperature measurement of plasma facing components in tokamaks
International Nuclear Information System (INIS)
Amiel, Stephane
2014-01-01
During this PhD, the challenges on the non-intrusive surface temperature measurements of metallic plasma facing components in tokamaks are reported. Indeed, a precise material emissivity value is needed for classical infrared methods and the environment contribution has to be known particularly for low emissivities materials. Although methods have been developed to overcome these issues, they have been implemented solely for dedicated experiments. In any case, none of these methods are suitable for surface temperature measurement in tokamaks.The active pyrometry introduced in this study allows surface temperature measurements independently of reflected flux and emissivities using pulsed and modulated photothermal effect. This method has been validated in laboratory on metallic materials with reflected fluxes for pulsed and modulated modes. This experimental validation is coupled with a surface temperature variation induced by photothermal effect and temporal signal evolvement modelling in order to optimize both the heating source characteristics and the data acquisition and treatment. The experimental results have been used to determine the application range in temperature and detection wavelengths. In this context, the design of an active pyrometry system on tokamak has been completed, based on a bicolor camera for a thermography application in metallic (or low emissivity) environment.The active pyrometry method introduced in this study is a complementary technique of classical infrared methods used for thermography in tokamak environment which allows performing local and 2D surface temperature measurements independently of reflected fluxes and emissivities. (author) [fr
Plasma diagnostics for tokamaks and stellarators
Energy Technology Data Exchange (ETDEWEB)
Stott, P. E.; Sanchez, J.
1994-07-01
A collection of papers on plasma diagnostics is presented. The papers show the state of the art developments in a series of techniques: Magnetic diagnostics, Edge diagnostics, Langmuir probes, Spectroscopy, Microwave and FIR diagnostics as well as Thomson Scattering. Special interest was focused on those diagnostics oriented to fluctuations measurements in the plasma. (Author) 451 refs.
Plasma diagnostics for tokamaks and stellarators
International Nuclear Information System (INIS)
Stott, P.E.; Sanchez, J.
1994-01-01
A collection of papers on plasma diagnostics is presented. The papers show the state of the art developments in a series of techniques: magnetic diagnostics, Edge diagnostics, Langmuir probes, Spectroscopy, Microwave and FIR diagnostics as well as Thomson Sattering. Special interest was focused on those diagnostics oriented to fluctuations measurements in the plasma
Pellet-plasma interactions in tokamaks
DEFF Research Database (Denmark)
Chang, C.T.
1991-01-01
The ablation of a refuelling pellet of solid hydrogen isotopes is governed by the plasma state, especially the density and energy distribution of the electrons. On the other hand, the cryogenic pellet gives rise to perturbations of the plasma temperature and density. Based on extensive experimental...... data, the interaction between the pellet and the plasma is reviewed. Among the subjects discussed are the MHD activity, evolution of temperature and density profiles, and the behaviour of impurities following the injection of a pellet (or pellets). The beneficial effect of density peaking on the energy...... of the plasma. The appearance of striations and the curving of the pellet trajectory are discussed in detail. The possibility is described for using these observations to study the plasma current-density distribution as well as the existence of suprathermal electrons....
Development of a tokamak plasma optimized for stability and confinement
International Nuclear Information System (INIS)
Politzer, P.A.
1995-02-01
Design of an economically attractive tokamak fusion reactor depends on producing steady-state plasma operation with simultaneous high energy density (β) and high energy confinement (τ E ); either of these, by itself, is insufficient. In operation of the DIII-D tokamak, both high confinement enhancement (H≡ τ E /τ ITER-89P = 4) and high normalized β (β N ≡ β/(I/aB) = 6%-m-T/MA) have been obtained. For the present, these conditions have been produced separately and in transient discharges. The DIII-D advanced tokamak development program is directed toward developing an understanding of the characteristics which lead to high stability and confinement, and to use that understanding to demonstrate stationary, high performance operation through active control of the plasma shape and profiles. The authors have identified some of the features of the operating modes in DIII-D that contribute to better performance. These are control of the plasma shape, control of both bulk plasma rotation and shear in the rotation and Er profiles, and particularly control of the toroidal current profiles. In order to guide their future experiments, they are developing optimized scenarios based on their anticipated plasma control capabilities, particularly using fast wave current drive (on-axis) and electron cyclotron current drive (off-axis). The most highly developed model is the second-stable core VH-mode, which has a reversed magnetic shear safety factor profile [q(O) = 3.9, q min = 2.6, and q 95 = 6]. This model plasma uses profiles which the authors expect to be realizable. At β N ≥ 6, it is stable to n=l kink modes and ideal ballooning modes, and is expected to reach H ≥ 3 with VH-mode-like confinement
The role of high speed photography in plasma instability research on the AEC tokamak
International Nuclear Information System (INIS)
Fletcher, J.D.; Coster, D.P.; De Villiers, J.A.M.; Kotze, P.B.; Nothnagel, G.; O'Mahony, J.R.; Roberts, D.E.; Sherwell, D.
1986-01-01
High speed cine photography is a useful diagnostic aid for studying plasma behaviour and plasma surface interactions in fusion research devices like tokamaks. Such a system has been installed on the AEC tokamak. This paper reports some preliminary results obtained during typical plasma discharges
Compact tokamak reactors part 2 (numerical results)
International Nuclear Information System (INIS)
Wiley, J.C.; Wootton, A.J.; Ross, D.W.
1996-01-01
The authors describe a numerical optimization scheme for fusion reactors. The particular application described is to find the smallest copper coil spherical tokamak, although the numerical scheme is sufficiently general to allow many other problems to be solved. The solution to the steady state energy balance is found by first selecting the fixed variables. The range of all remaining variables is then selected, except for the temperature. Within the specified ranges, the temperature which satisfies the power balance is then found. Tests are applied to determine that remaining constraints are satisfied, and the acceptable results then stored. Results are presented for a range of auxiliary current drive efficiencies and different scaling relationships; for the range of variables chosen the machine encompassing volume increases or remains approximately unchanged as the aspect ratio is reduced
Compact tokamak reactors part 2 (numerical results)
Energy Technology Data Exchange (ETDEWEB)
Wiley, J.C.; Wootton, A.J.; Ross, D.W.
1996-10-21
The authors describe a numerical optimization scheme for fusion reactors. The particular application described is to find the smallest copper coil spherical tokamak, although the numerical scheme is sufficiently general to allow many other problems to be solved. The solution to the steady state energy balance is found by first selecting the fixed variables. The range of all remaining variables is then selected, except for the temperature. Within the specified ranges, the temperature which satisfies the power balance is then found. Tests are applied to determine that remaining constraints are satisfied, and the acceptable results then stored. Results are presented for a range of auxiliary current drive efficiencies and different scaling relationships; for the range of variables chosen the machine encompassing volume increases or remains approximately unchanged as the aspect ratio is reduced.
Liquid gallium jet-plasma interaction studies in ISTTOK tokamak
International Nuclear Information System (INIS)
Gomes, R.B.; Fernandes, H.; Silva, C.; Sarakovskis, A.; Pereira, T.; Figueiredo, J.; Carvalho, B.; Soares, A.; Duarte, P.; Varandas, C.; Lielausis, O.; Klyukin, A.; Platacis, E.; Tale, I.; Alekseyv, A.
2009-01-01
Liquid metals have been pointed out as a suitable solution to solve problems related to the use of solid walls submitted to high power loads allowing, simultaneously, an efficient heat exhaustion process from fusion devices. The most promising candidate materials are lithium and gallium. However, lithium has a short liquid state temperature range when compared with gallium. To explore further this property, ISTTOK tokamak is being used to test the interaction of a free flying liquid gallium jet with the plasma. ISTTOK has been successfully operated with this jet without noticeable discharge degradation and no severe effect on the main plasma parameters or a significant plasma contamination by liquid metal. Additionally the response of an infrared sensor, intended to measure the jet surface temperature increase during its interaction with the plasma, has been studied. The jet power extraction capability is extrapolated from the heat flux profiles measured in ISTTOK plasmas.
Evaluation of the plasma parameters in COMPASS tokamak divertor area
Czech Academy of Sciences Publication Activity Database
Dimitrova, M.; Ivanova, P.; Kotseva, I.; Popov, Tsv.K.; Benova, E.; Bogdanov, T.; Stöckel, Jan; Dejarnac, Renaud
2012-01-01
Roč. 356, č. 1 (2012), s. 012007 ISSN 1742-6588. [InternationalSummerSchoolonVacuum,Electron,andIonTechnologies(VEIT2011)/17./. Sunny Beach , 19.09.2011-23.09.2011] Institutional research plan: CEZ:AV0Z20430508 Keywords : Plasma * tokamak * diagnostics * electric probe * magnetic-field * Langmuir probe * intermediate * pressures Subject RIV: BL - Plasma and Gas Discharge Physics http://iopscience.iop.org/1742-6596/356/1/012007/pdf/1742-6596_356_1_012007.pdf
Plasma facing components design of KT-2 tokamak
International Nuclear Information System (INIS)
In, Sang Ryul; Yoon, Byung Joo; Song, Woo Soeb; Xu, Chao Yin
1997-04-01
The vacuum vessel of KT-2 tokamak is protected from high thermal loads by various kinds of plasma facing components (PFC): outer and inner divertors, neutral baffle, inboard limiter, poloidal limiter, movable limiter and passive plate, installed on the inner wall of the vessel. In this report the pre-engineering design of the plasma facing components, including design requirements and function, structures of PFC assemblies, configuration of cooling systems, calculations of some mechanical and hydraulic parameters, is presented. Pumping systems for the movable limiter and the divertor are also discussed briefly. (author). 49 figs
Electron temperature gradient driven instability in the tokamak boundary plasma
International Nuclear Information System (INIS)
Xu, X.Q.; Rosenbluth, M.N.; Diamond, P.H.
1992-01-01
A general method is developed for calculating boundary plasma fluctuations across a magnetic separatrix in a tokamak with a divertor or a limiter. The slab model, which assumes a periodic plasma in the edge reaching the divertor or limiter plate in the scrape-off layer(SOL), should provide a good estimate, if the radial extent of the fluctuation quantities across the separatrix to the edge is small compared to that given by finite particle banana orbit. The Laplace transform is used for solving the initial value problem. The electron temperature gradient(ETG) driven instability is found to grow like t -1/2 e γmt
Continuum kinetic modeling of the tokamak plasma edge
Energy Technology Data Exchange (ETDEWEB)
Dorf, M. A.; Dorr, M. R.; Hittinger, J. A.; Rognlien, T. D. [Lawrence Livermore National Laboratory, Livermore, California 94550 (United States); Cohen, R. H. [CompX, P.O. Box 2672, Del Mar, California 92014 (United States)
2016-05-15
The first 4D (axisymmetric) high-order continuum gyrokinetic transport simulations that span the magnetic separatrix of a tokamak are presented. The modeling is performed with the COGENT code, which is distinguished by fourth-order finite-volume discretization combined with mapped multiblock grid technology to handle the strong anisotropy of plasma transport and the complex X-point divertor geometry with high accuracy. The calculations take into account the effects of fully nonlinear Fokker-Plank collisions, electrostatic potential variations, and anomalous radial transport. Topics discussed include: (a) ion orbit loss and the associated toroidal rotation and (b) edge plasma relaxation in the presence of anomalous radial transport.
Turbulence studies in tokamak boundary plasmas with realistic divertor geometry
International Nuclear Information System (INIS)
Xu, X.Q.; Cohen, R.H.; Por, G.D. ter; Rognlien, T.D.; Ryutov, D.D.; Myra, J.R.; D'Ippolito, D.A.; Moyer, R.; Groebner, R.J.
1999-01-01
Results are presented from the 3D nonlocal electromagnetic turbulence code BOUT and the linearized shooting code BAL for studies of turbulence in tokamak boundary plasmas and its relationship to the L-H transition, in a realistic divertor plasma geometry. The key results include: (1) the identification of the dominant resistive X-point mode in divertor geometry and (2) turbulence suppression in the L-H transition by shear in the E x B drift speed, ion diamagnetism and finite polarization. Based on the simulation results, a parameterization of the transport is given that includes the dependence on the relevant physical parameters. (author)
Turbulence studies in tokamak boundary plasmas with realistic divertor geometry
International Nuclear Information System (INIS)
Xu, X.Q.; Cohen, R.H.; Porter, G.D.; Rognlien, T.; Ryutov, D.D.; Myra, J.R.; D'Ippolito, D.A.; Moyer, R.; Groebner, R.J.
2001-01-01
Results are presented from the 3D nonlocal electromagnetic turbulence code BOUT and the linearized shooting code BAL for studies of turbulence in tokamak boundary plasmas and its relationship to the L-H transition, in a realistic divertor plasma geometry. The key results include: (1) the identification of the dominant resistive X-point mode in divertor geometry and (2) turbulence suppression in the L-H transition by shear in the ExB drift speed, ion diamagnetism and nite polarization. Based on the simulation results, a parameterization of the transport is given that includes the dependence on the relevant physical parameters. (author)
Size scaling of turbulent transport in tokamak plasmas
International Nuclear Information System (INIS)
Lin Zhihong
2002-01-01
Transport scaling with respect to tokamak device size is critically examined for electrostatic ion temperature gradient (ITG) turbulence with adiabatic electrons using first-principles gyrokinetic particle simulations, which use up to one billion particles to address realistic parameters of reactor-grade plasmas. Results of these large scale simulations, varying ρ* (ion gyroradius normalized by tokamak minor radius) while keeping other dimensionless plasma parameters fixed, show that the fluctuation scale length is microscopic and transport is diffusive in the presence of zonal flows. The local transport coefficient exhibits a gradual transition from a Bohm-like scaling for device sizes corresponding to present-day tokamak experiments to a gyro-Bohm scaling for future larger devices. The device size where this transition occurs is much larger than that expected from linear ITG theory for profile variations. Our simulations include a heat bath/source to prevent profile relaxation and are in the strong turbulence regime far away from ITG marginality. The effects of kinetic electrons on electrostatic ITG-TEM (trapped electron mode) driven turbulence will also be presented. (author)
A quasi-linear gyrokinetic transport model for tokamak plasmas
International Nuclear Information System (INIS)
Casati, A.
2009-10-01
After a presentation of some basics around nuclear fusion, this research thesis introduces the framework of the tokamak strategy to deal with confinement, hence the main plasma instabilities which are responsible for turbulent transport of energy and matter in such a system. The author also briefly introduces the two principal plasma representations, the fluid and the kinetic ones. He explains why the gyro-kinetic approach has been preferred. A tokamak relevant case is presented in order to highlight the relevance of a correct accounting of the kinetic wave-particle resonance. He discusses the issue of the quasi-linear response. Firstly, the derivation of the model, called QuaLiKiz, and its underlying hypotheses to get the energy and the particle turbulent flux are presented. Secondly, the validity of the quasi-linear response is verified against the nonlinear gyro-kinetic simulations. The saturation model that is assumed in QuaLiKiz, is presented and discussed. Then, the author qualifies the global outcomes of QuaLiKiz. Both the quasi-linear energy and the particle flux are compared to the expectations from the nonlinear simulations, across a wide scan of tokamak relevant parameters. Therefore, the coupling of QuaLiKiz within the integrated transport solver CRONOS is presented: this procedure allows the time-dependent transport problem to be solved, hence the direct application of the model to the experiment. The first preliminary results regarding the experimental analysis are finally discussed
Emissive probe measurements of plasma potential fluctuations in the edge plasma regions of tokamaks
Czech Academy of Sciences Publication Activity Database
Balan, P.; Schrittweiser, R.; Ionita, C.; Cabral, J. A.; Figueiredo, H. F. C.; Fernandes, H.; Varandas, C.; Adámek, Jiří; Hron, Martin; Stöckel, Jan; Martines, E.; Tichý, M.; Van Oost, G.
2003-01-01
Roč. 74, č. 3 (2003), s. 1583-1587 ISSN 0034-6748 R&D Projects: GA ČR GA202/00/1217 Institutional research plan: CEZ:AV0Z2043910 Keywords : plasma physics, tokamaks, probes Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 1.343, year: 2003
Experimental investigation of turbulent transport at the edge of a tokamak plasma
International Nuclear Information System (INIS)
Fedorczak, N.
2010-01-01
This manuscript is devoted to the experimental investigation of particle transport in the edge region of the tokamak Tore Supra. The first part introduces the motivations linked to energy production, the principle of a magnetic confinement and the elements of physics essential to describe the dynamic of the plasma at the edge region. From data collected by a set of Langmuir probes and a fast visible imaging camera, we demonstrate that the particle transport is dominated by the convection of plasma filaments, structures elongated along magnetic field lines. They present a finite wave number, responsible for the high enhancement of the particle flux at the low field side of the tokamak. This leads to the generation of strong parallel flows, and the strong constraint of filament geometry by the magnetic shear. (author)
Thermal stability of the tokamak plasma edge
International Nuclear Information System (INIS)
Stacey, W.M.
1997-01-01
The general linear, fluid, thermal instability theory for the plasma edge has been extended. An analysis of a two-dimensional fluid model of the plasma edge has identified the importance of many previously unappreciated phenomena associated with parallel and gyroviscous forces in the presence of large radial gradients, with large radial or parallel flows, with the temperature dependence of transport coefficients, and with the coupling of temperature, flow and density perturbations. The radiative condensation effect is generalized to include a further destabilizing condensation effect associated with radial heat conduction. Representative plasma edge neutral and impurity densities are found to be capable of driving thermal instabilities in the edge transport barrier and radiative mantle, respectively. (author)
The COMPASS Tokamak Plasma Control Software Performance
Czech Academy of Sciences Publication Activity Database
Valcárcel, D.F.; Neto, A.; Carvalho, I.S.; Carvalho, B.B.; Fernandes, H.; Sousa, J.; Janky, F.; Havlíček, Josef; Beňo, R.; Horáček, Jan; Hron, Martin; Pánek, Radomír
2011-01-01
Roč. 58, č. 4 (2011), s. 1490-1496 ISSN 0018-9499. [Real Time Conference, RT10/17th./. Lisboa, 24.05.2010-28.05.2010] R&D Projects: GA MŠk 7G09042; GA ČR GD202/08/H057 Institutional research plan: CEZ:AV0Z20430508 Keywords : Real-Time * ATCA * Data Acquisition * Plasma Control Software Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 1.447, year: 2011 http://dx.doi.org/10.1109/TNS.2011.2143726
Reversal of plasma flow in tokamak divertors
International Nuclear Information System (INIS)
Maddison, G.P.; Reiter, D.; Stangeby, P.C.; Prinja, A.K.
1993-01-01
In a magnetic divertor, retention of impurity ions is expected to be dependent on an expulsive thermal force directed up the gradient of ion temperature being opposed by frictional entrainment in a plasma flow towards the target. Preferred conditions of high recycling, however, can induce a reversal of usual plasma flow, with consequent reinforcement of thermal forces potentially leading to damaging contamination of the core. Backflow in diverted plasmas was first anticipated theoretically by Nedospasov and Tokar', subsequently observed experimentally in DITE and JET, and has been seen in a number of numerical studies. We report briefly on a systematic investigation of steady-state divertor flow reversal for ITER-relevant conditions, by detailed numerical modelling. The BRAAMS 'B2' edge plasma transport code is used, with both analytic approximations and EIRENE Monte Carlo simulation of neutral particle recycling. The flexibility of numerical models regarding physics admitted is exploited to expose the key role of redistribution of recycling sources across magnetic surfaces in flow reversal. Concomitant amplification of cross-field ion diffusion in the SOL is also examined. (author) 10 refs., 4 figs
Plasma vertical instability in a tokamak with rail limiters
International Nuclear Information System (INIS)
Belashob, V.I.; Brevnov, N.N.; Gribov, Yu.V.; Putvinskij, S.V.
1989-01-01
An effect of currents between rail limiters on plasma equilibrium in the tokamak is studied theoretically and experimentally. Limiter currents can emerge at fast changes of plasma position along rail limiters for example when compression along major radius takes place and result in additional electrodynamic loadings on to the chamber and limiters. It is shown that at high currents between the limiters, the behaviour of discharge depends on limiter voltage polarity. When the plasma - limiter contact points are asymmetrically located respective to an equatorial plane a radial component of the limiter current emerges. The interaction of the component with the toroidal magnetic field can result in a vertical plasma filament instability. 9 refs.; 10 figs
Measurement of the effective plasma ion mass in large tokamaks
International Nuclear Information System (INIS)
Lister, J.B.; Villard, L.; Ridder, G. de
1997-01-01
There is not yet a straightforward method for the measurement of the D-T ratio in the centre of a tokamak plasma. One of the simpler measurements put forward in the past is the interpretation of the MHD spectrum in the frequency range of the Global Alfven Eigenmodes (GAE). However, the frequencies of these modes do not only depend on the plasma mass, but are also quite strongly dependent on the details of the current and density profiles, creating a problem of deconvolution of the estimate of the plasma mass from an implicit relationship between several measurable plasma parameters and the detected eigenmode frequencies. This method has been revised to assess its likely precision for the JET tokamak. The low n GAE modes are sometimes too close to the continuum edge to be detectable and the interpretation of the GAE spectrum is rendered less direct than had been hoped. We present a statistical study on the precision with which the D-T ratio could be estimated from the GAE spectrum on JET. (author) 4 figs., 8 refs
Tokamak plasma self-organization and the possibility to have the peaked density profile in ITER
Razumova, K. A.; Andreev, V. F.; Kislov, A. Y.; Kirneva, N. A.; Lysenko, S. E.; Pavlov, Y. D.; Shafranov, T. V.; Donne, A. J. H.; Hogeweij, G. M. D.; Spakman, G. W.; R. Jaspers,; Kantor, M.; Walsh, M.
2009-01-01
The self-organization of a tokamak plasma is a fundamental turbulent plasma phenomenon, which leads to the formation of a self-consistent pressure profile. This phenomenon has been investigated in several tokamaks with different methods of heating. It is shown that the normalized pressure profile
Response of a tokamak plasma to particle and momentum sources
International Nuclear Information System (INIS)
Stacey, W.M. Jr.; Sigmar, D.J.
1978-12-01
The response of an axisymmetric toroidal tokamak plasma to first-order particle and momentum sources is investigated. The momentum sources drive coupled poloidal and toroidal mass flows and electrostatic field evolution which relax to asymptotic values on a time scale that is characteristic of the dominant viscous or external drag mechanism. The asymptotic steady-state momentum balance provides the necessary condition to completely determine the particle fluxes and currents in the flux surfaces, and, hence, to determine transport fluxes across flux surfaces. Transport fluxes are driven across flux surfaces both by interspecies collisional momentum exchange, the usual case, and by momentum exchange between the plasma and external sources and/or drags. A generalized Ohm's law is obtained and used to determine the manner in which particle and momentum sources can drive parallel currents and can alter the evolution of the q-profile. The theory is formulated for arbitrary plasma cross sections, beta, and collision regimes
Trade studies of plasma elongation for next-step tokamaks
International Nuclear Information System (INIS)
Galambos, J.D.; Strickler, D.J.; Peng, Y.K.M.; Reid, R.L.
1988-09-01
The effect of elongation on minimum-cost devices is investigated for elongations ranging from 2 to 3. The analysis, carried out with the TETRA tokamak systems code, includes the effects of elongation on both physics (plasma beta limit) and engineering (poloidal field coil currents) issues. When ignition is required, the minimum cost occurs for elongations from 2.3 to 2.9, depending on the plasma energy confinement scaling used. Scalings that include favorable plasma current dependence and/or degradation with fusion power tend to have minimum cost at higher elongation (2.5-2.9); scalings that depend primarily on size result in lower elongation (/approximately/2.3) for minimum cost. For design concepts that include steady-state current-driven operation, minimum cost occurs at an elongation of 2.3. 12 refs., 13 figs
Neoclassical Physics for Current Drive in Tokamak Plasmas
International Nuclear Information System (INIS)
Duthoit, F.X.
2012-03-01
The Lie transform formalism is applied to charged particle dynamics in tokamak magnetic topologies, in order to build a Fokker-Planck type operator for Coulomb collisions usable for current drive. This approach makes it possible to reduce the problem to three dimensions (two in velocity space, one in real space) while keeping the wealth of phase-space cross-term coupling effects resulting from conservation of the toroidal canonical momentum (axisymmetry). This kinetic approach makes it possible to describe physical phenomena related to the presence of strong pressure gradients in plasmas of an unspecified form, like the bootstrap current which role will be paramount for the future ITER machine. The choice of coordinates and the method used are particularly adapted to the numerical resolution of the drift kinetic equation making it possible to calculate the particle distributions, which may present a strong variation with respect to the Maxwellian under the effect of an electric field (static or produced by a radio-frequency wave). This work, mainly dedicated to plasma physics of tokamaks, was extended to those of space plasmas with a magnetic dipole configuration. (author)
Self-consistent treatment of transport in tokamak plasmas
International Nuclear Information System (INIS)
Wilhelmsson, H.
1993-01-01
A theory is developed for the dynamics of tokamak plasmas considering the influence of combinations of simultaneous heating processes (alpha particle, auxiliary and ohmic), thermal conduction and particle diffusion, thermal and particle pinches, thermalization of alpha particles as well as the effects of boundary conditions. The analysis is based on a generalization of the central expansion technique which transforms the partial differential equations to a set of nonlinear coupled equations in time for the dynamic variables. Oscillatory solutions are found, but only in the presence of alpha particle heating. Examples of extensive computer simulations are included which support and complete the analytic results. (26 refs.)
Magnetohydrodynamic stability of tokamak plasmas with poloidal mode coupling
International Nuclear Information System (INIS)
Shigueoka, H.; Sakanaka, P.H.
1987-01-01
The stability behavior with respect to internal modes is examined for a class of tokamak equilibria with non-circular cross sections. The surfaces of the constant poloidal magnetic flux ψ (R,Z) are obtained numerically by solving the Grad-Shafranov's equation with a specified shape for the outmost plasma surface. The equation of motion for ideal MHD stability is written in a ortogonal coordinate system (ψ, χ, φ). Th e stability analysis is performance numerically in a truncated set of coupled m (poloidal wave number) equations. The calculations involve no approximations, and so all parameters of the equilibrium solution can be arbitrarily varied. (author) [pt
Information content of transient synchrotron radiation in tokamak plasmas
International Nuclear Information System (INIS)
Fisch, N.J.; Kritz, A.H.
1989-04-01
A brief, deliberate, perturbation of hot tokamak electrons produces a transient, synchrotron radiation signal, in frequency-time space, with impressive informative potential on plasma parameters; for example, the dc toroidal electric field, not available by other means, may be measurably. Very fast algorithms have been developed, making tractable a statistical analysis that compares essentially all parameter sets that might possibly explain the transient signal. By simulating data numerically, we can estimate the informative worth of data prior to obtaining it. 20 refs., 2 figs
Real-Time Software for the Compass Tokamak Plasma Control
Energy Technology Data Exchange (ETDEWEB)
Valcarcel, D.F.; Duarte, A.S.; Neto, A.; Carvalho, I.S.; Carvalho, B.B.; Fernandes, H.; Sousa, J. [Instituto de Plasmas e Fusao Nuclear, Instituto Superior Tecnico, Lisboa (Portugal); Sartori, F. [Euratom-UKAEA, Culham Science Centre, Abingdon, OX14 3DB Oxon (United Kingdom); Janky, F.; Cahyna, P.; Hron, M.; Panek, R. [Institute of Plasma Physics AS CR, v.v.i., Association EURATOM / IPP.CR, Prague (Costa Rica)
2009-07-01
This poster presents the flexible and high-performance real time system that guarantees the desired time cycles for plasma control on the COMPASS tokamak: 500 {mu}s for toroidal field, current, equilibrium and shaping; 50 {mu}s for fast control of the equilibrium and vertical instability. This system was developed on top of a high-performance processor and a software framework (MARTe) tailored for real-time. The preliminary measurements indicate that the time constraints will be met on the final solution. The system allows the making of modifications in the future to improve software components. (A.C.)
Power supplies for plasma column control in COMPASS tokamak
Czech Academy of Sciences Publication Activity Database
Havlíček, Josef; Hauptmann, R.; Peroutka, Oldřich; Tadros, Momtaz; Hron, Martin; Janky, Filip; Vondráček, Petr; Cahyna, Pavel; Mikulín, Ondřej; Šesták, David; Junek, Pavel; Pánek, Radomír
2013-01-01
Roč. 88, 9-10 (2013), s. 1640-1645 ISSN 0920-3796. [Symposium on Fusion Technology ( SOFT -27)/27./. Liège, 24.09.2012-28.09.2012] R&D Projects: GA ČR GAP205/11/2470; GA MŠk 7G10072; GA MŠk(CZ) LM2011021 Institutional support: RVO:61389021 Keywords : tokamak * Power supplies * Feedback control * Vertical displacement * Vertical kicks Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 1.149, year: 2013 http://www.sciencedirect.com/science/article/pii/S0920379613001543#
Ion thermal conductivity for a pure tokamak plasma
International Nuclear Information System (INIS)
Bolton, C.; Ware, A.
1981-10-01
The neoclassical and Pfirsch-Schlueter component of the ion heat conduction for a pure hydrogen Tokamak plasma are recalculated without assuming large aspect ratio and without neglecting energy scattering collisions. Using a model collision operator the conductivity is determined numerically for various collision frequencies and aspect ratios. An approximate algebraic expression is fitted to the results. Even for comparatively large aspect ratios(approx. 10) energy scattering increases the conductivity in the banana regime by about 50% and for small aspect ratios(approx. 3.3) the Pfirsch-Schlueter contribution causes a further increase of approximately 60%
Study of edge turbulence in tokamak plasmas
International Nuclear Information System (INIS)
Sarazin, Y.
1997-01-01
The aim of this work is to propose a new frame to study turbulent transport in plasmas. In order to avoid the restraint of scale separability the forcing by flux is used. A critical one-dimension self-organized cellular model is developed. In keeping with experience the average transport can be described by means of diffusion and convection terms whereas the local transport could not. The instability due to interchanging process is thoroughly studied and some simplified equations are derived. The proposed model agrees with the following experimental results: the relative fluctuations of density are maximized on the edge, the profile shows an exponential behaviour and the amplitude of density fluctuations depends on ionization source strongly. (A.C.)
The ion velocity distribution of tokamak plasmas: Rutherford scattering at TEXTOR
International Nuclear Information System (INIS)
Tammen, H.F.
1995-01-01
One of the most promising ways to gererate electricity in the next century on a large scale is nuclear fusion. In this process two light nuclei fuse and create a new nucleus with a smaller mass than the total mass of the original nuclei, the mass deficit is released in the form of kinetic energy. Research into this field has already been carried out for some decades now, and will have to continue for several more decades before a commercially viable fusion reactor can be build. In order to obtain fusion, fuels of extremely high temperatures are needed to overcome the repulsive force of the nuclei involved. Under these circumstances the fuel is fully ionized: it consists of ions and electrons and is in the plasma state. The problem of confining such a hot substance is solved by using strong magnetic fields. One specific magnetic configuration, in common use, is called the tokamak. The plasma in this machine has a toroidal, i.e. doughnut shaped, configuration. For understanding the physical processes which take place in the plasma, a good temporally and spatially resolved knowledge of both the ion and electron velocity distribution is required. The situation concerning the electrons is favourable, but this is not the case for the ions. To improve the existing knowledge of the ion velocity distribution in tokamak plasmas, a Rutherford scattering diagnostic (RUSC), designed and built by the FOM-Institute for Plasmaphysics 'Rijnhuizen', was installed at the TEXTOR tokamak in Juelich (D). The principle of the diagnostic is as follows. A beam of monoenergetic particles (30 keV, He) is injected vertically into the plasma. A small part of these particles collides elastically with the moving plasma ions. By determining the energy of a scattered beam particle under a certain angle (7 ), the initial velocity of the plasma ion in one direction can be computed. (orig./WL)
The ion velocity distribution of tokamak plasmas: Rutherford scattering at TEXTOR
Energy Technology Data Exchange (ETDEWEB)
Tammen, H.F.
1995-01-10
One of the most promising ways to gererate electricity in the next century on a large scale is nuclear fusion. In this process two light nuclei fuse and create a new nucleus with a smaller mass than the total mass of the original nuclei, the mass deficit is released in the form of kinetic energy. Research into this field has already been carried out for some decades now, and will have to continue for several more decades before a commercially viable fusion reactor can be build. In order to obtain fusion, fuels of extremely high temperatures are needed to overcome the repulsive force of the nuclei involved. Under these circumstances the fuel is fully ionized: it consists of ions and electrons and is in the plasma state. The problem of confining such a hot substance is solved by using strong magnetic fields. One specific magnetic configuration, in common use, is called the tokamak. The plasma in this machine has a toroidal, i.e. doughnut shaped, configuration. For understanding the physical processes which take place in the plasma, a good temporally and spatially resolved knowledge of both the ion and electron velocity distribution is required. The situation concerning the electrons is favourable, but this is not the case for the ions. To improve the existing knowledge of the ion velocity distribution in tokamak plasmas, a Rutherford scattering diagnostic (RUSC), designed and built by the FOM-Institute for Plasmaphysics `Rijnhuizen`, was installed at the TEXTOR tokamak in Juelich (D). The principle of the diagnostic is as follows. A beam of monoenergetic particles (30 keV, He) is injected vertically into the plasma. A small part of these particles collides elastically with the moving plasma ions. By determining the energy of a scattered beam particle under a certain angle (7 ), the initial velocity of the plasma ion in one direction can be computed. (orig./WL).
Continuous, saturation, and discontinuous tokamak plasma vertical position control systems
Energy Technology Data Exchange (ETDEWEB)
Mitrishkin, Yuri V., E-mail: y_mitrishkin@hotmail.com [M. V. Lomonosov Moscow State University, Faculty of Physics, Moscow 119991 (Russian Federation); Pavlova, Evgeniia A., E-mail: janerigoler@mail.ru [M. V. Lomonosov Moscow State University, Faculty of Physics, Moscow 119991 (Russian Federation); Kuznetsov, Evgenii A., E-mail: ea.kuznetsov@mail.ru [Troitsk Institute for Innovation and Fusion Research, Moscow 142190 (Russian Federation); Gaydamaka, Kirill I., E-mail: k.gaydamaka@gmail.com [V. A. Trapeznikov Institute of Control Sciences of the Russian Academy of Sciences, Moscow 117997 (Russian Federation)
2016-10-15
Highlights: • Robust new linear state feedback control system for tokamak plasma vertical position. • Plasma vertical position relay control system with voltage inverter in sliding mode. • Design of full models of multiphase rectifier and voltage inverter. • First-order unit approximation of full multiphase rectifier model with high accuracy. • Wider range of unstable plant parameters of stable control system with multiphase rectifier. - Abstract: This paper is devoted to the design and comparison of unstable plasma vertical position control systems in the T-15 tokamak with the application of two types of actuators: a multiphase thyristor rectifier and a transistor voltage inverter. An unstable dynamic element obtained by the identification of plasma-physical DINA code was used as the plasma model. The simplest static feedback state space control law was synthesized as a linear combination of signals accessible to physical measurements, namely the plasma vertical displacement, the current, and the voltage in a horizontal field coil, to solve the pole placement problem for a closed-loop system. Only one system distinctive parameter was used to optimize the performance of the feedback system, viz., a multiple real pole. A first-order inertial unit was used as the rectifier model in the feedback. A system with a complete rectifier model was investigated as well. A system with the voltage inverter model and static linear controller was brought into a sliding mode. As this takes place, real time delays were taken into account in the discontinuous voltage inverter model. The comparison of the linear and sliding mode systems showed that the linear system enjoyed an essentially wider range of the plant model parameters where the feedback system was stable.
Thermographic analysis of plasma facing components covered by carbon surface layer in tokamaks
International Nuclear Information System (INIS)
Gardarein, Jean-Laurent
2007-01-01
Tokamaks are reactors based on the thermonuclear fusion energy with magnetic confinement of the plasma. In theses machines, several MW are coupled to the plasma for about 10 s. A large part of this power is directed towards plasma facing components (PFC). For better understanding and control the heat flux transfer from the plasma to the surrounding wall, it is very important to measure the surface temperature of the PFC and to estimate the imposed heat flux. In most of tokamaks using carbon PFC, the eroded carbon is circulating in the plasma and redeposited elsewhere. During the plasma operations, this leads at some locations to the formation of thin or thick carbon layers usually poorly attached to the PFC. These surface layers with unknown thermal properties complicate the calculation of the heat flux from IR surface temperature measurements. To solve this problem, we develop first, inverse method to estimate the heat flux using thermocouple (not sensitive to the carbon surface layers) temperature measurements. Then, we propose a front face pulsed photothermal method allowing an estimation of layers thermal diffusivity, conductivity, effusivity and the thermal contact resistance between the layer and the tile. The principle is to study with an infrared sensor, the cooling of the layer surface after heating by a short laser pulse, this cooling depending on the thermal properties of the successive layers. (author) [fr
The conversion of the thermal energy of plasma in the SOL of tokamaks
International Nuclear Information System (INIS)
Nedospasov, A.V.; Nenova, N.V.
2008-01-01
When the plasma expands across the confining magnetic field, a part of its thermal energy is converted to electrical energy. In the SOL of tokamaks, the motion of the plasma across the field due to turbulent processes is accompanied by its departure along the open lines of the magnetic field. The conversion of thermal energy is taken into account in theoretical studies devoted to the physics of plasma in the SOL; however, this conversion is ignored in numerical models, for example, in B2-SOLPS4.0. This paper deals with thermal-to-electrical energy conversion in the SOL of tokamaks. It is demonstrated that the part of the thermal energy subjected to conversion to electrical energy forms an appreciable part of the total energy flowing in the SOL. In ITER, this fraction may be as high as 20-25%. The electrical energy generated in the SOL volume is liberated in the form of Joule heat in a relatively cold plasma in the vicinity of diverter plates or directly on these plates. (letter)
Energy Technology Data Exchange (ETDEWEB)
Koohestani, Saeideh [Department of Energy Engineering and physics, Amirkabir University of Technology, Tehran, 15875-4413, Islamic Republic of Iran (Iran, Islamic Republic of); Amrollahi, Reza, E-mail: amrollahi@aut.ac.ir [Department of Energy Engineering and physics, Amirkabir University of Technology, Tehran, 15875-4413, Islamic Republic of Iran (Iran, Islamic Republic of); Moradi, Gholamreza [Department of Electrical Engineering, Amirkabir University of Technology, Tehran, 15875-4413, Islamic Republic of Iran (Iran, Islamic Republic of)
2016-12-15
Reflectometry is a common method for plasma diagnostic, in which microwaves are launched into the plasma and reflected at the critical surfaces. Comparing the reflected microwave signals with the launched waves would give rise to the plasma density profiles. In the present study, an ordinary mode (O-mode) frequency modulation (FM) reflectometry system has been designed for the electron density profile measurement of the Alborz Tokamak plasma. This system has been considered to operate at K-band (18–26.5 GHz) frequency range and scan the frequency band between 18 to 26 GHz in 40 μS. The density profile from major radius r = 47.9–51.55 cm can be measured in Alborz Tokamak plasma. Based on the Alborz Tokamak operational conditions, the characteristic frequencies, and some dimensional limitations, all parts of reflectometer have been designed so that an appropriate efficiency with minimum attenuation, especially in transmitting/receiving system would be achieved. A dual antenna and an oversized waveguide of X-band (8–12 GHz) for transmitting and receiving purposes and a balanced detector for absolute phase determination have been utilized. The details of the Alborz Tokamak FM reflectometry components focusing on the antenna and waveguide design and mounting are described in this paper. Additionally, the procedure of plasma profile reconstruction using the system output signal is discussed. This system uses signal phase shift to determine the position of the cutoff layer.
New D3-D tokamak plasma control system
Campbell, G. L.; Ferron, J. R.; McKee, E.; Nerem, A.; Smith, T.; Greenfield, C. M.; Pinsker, R. I.; Lazarus, E. A.
1992-09-01
A state-of-the-art plasma control system has been constructed for use on the DIII-D tokamak to provide high speed real time data acquisition and feedback control of DIII-D plasma parameters. This new system has increased the precision to which discharge shape and position parameters can be maintained and has provided the means to rapidly change from one plasma configuration to another. The capability to control the plasma total energy and the ICRF antenna loading resistance has been demonstrated. The speed and accuracy of this digital system will allow control of the current drive and heating systems in order to regulate the current and pressure profiles and divertor power deposition in the DIII-D machine. Use of this system will allow the machine and power supplies to be better protected from undesirable operating regimes. The advanced control system is also suitable for control algorithm development for future machines in these areas and others such as disruption avoidance. The DIII-D tokamak facility is operated for the U.S. Department of Energy by General Atomics Company (GA) in San Diego, California. The DIII-D experimental program will increase emphasis on rf heating and current drive in the near future and is installing a cryopumped divertor ring during the fall of 1992. To improve the flexibility of this machine for these experiments, the new shape control system was implemented. The new advanced plasma control system has enhanced the capabilities of the DIII-D machine and provides a data acquisition and control platform that promises to be useful far beyond its original charter.
Anomalous energy transport in hot plasmas: solar corona and Tokamak
International Nuclear Information System (INIS)
Beaufume, P.
1992-04-01
Anomalous energy transport is studied in two hot plasmas and appears to be associated with a heating of the solar corona and with a plasma deconfining process in tokamaks. The magnetic structure is shown to play a fundamental role in this phenomenon through small scale instabilities which are modelized by means of a nonlinear dynamical system: the Beasts' Model. Four behavior classes are found for this system, which are automatically classified in the parameter space thanks to a neural network. We use a compilation of experimental results relative to the solar corona to discuss current-based heating processes. We find that a simple Joule effect cannot provide the required heating rates, and therefore propose a dimensional model involving a resistive reconnective instability which leads to an efficient and discontinuous heating mechanism. Results are in good agreement with the observations. We give an analytical expression for a diffusion coefficient in tokamaks when magnetic turbulence is perturbing the topology, which we validate thanks to the standard mapping. A realistic version of the Beasts' Model allows to test a candidate to anomalous transport: the thermal filamentation instability
Energy Technology Data Exchange (ETDEWEB)
Chavez A, E.; Melendez L, L.; Colunga S, S.; Valencia A, R.; Lopez C, R.; Gaytan G, E
1991-07-15
The charged particles that constitute the plasma in the tokamaks are located in magnetic fields that determine its behavior. The poloidal magnetic field of the plasma current and the toroidal magnetic field of the tokamak possess relatively big gradients, which produce drifts on these particles. These drifts are largely the cause of the continuous lost of particles and of energy of the confinement region. In this work the results of numerical calculations of a modification to the 'traditional' toroidal magnetic field that one waits it diminishes the drifts by gradient and improve the confinement properties of the tokamaks. (Author)
Heat flow during sawtooth collapse in tokamak plasmas
International Nuclear Information System (INIS)
Hanada, Kazuaki
1994-01-01
Heat flow during sawtooth collapse was studied on the WT-3 tokamak by using temporal evolution of soft X-ray intensity profile in the poloidal cross section in a lower hybrid current driven plasma as well as an electron cyclotron heated plasma. Two phase in sawtooth collapses were observed. In the first phases, the hottest spot that is the peak of the soft X-ray distribution approaches the inversion surface and heat flows out through a narrow gate on the inversion surface. In the second phase, the hottest spot stays on the inversion surface, and heat flows out through the whole inversion surface. This suggests that magnetic reconnection as predicted by Kadomtsev's model occurs in the first phase, but in the second phase, a different mechanism dominates heat flow. (author)
A general comparison between tokamak and stellarator plasmas
Directory of Open Access Journals (Sweden)
Yuhong Xu
2016-07-01
Full Text Available This paper generally compares the essential features between tokamaks and stellarators, based on previous review work individually made by authors on several specific topics, such as theories, bulk plasma transport and edge divertor physics, along with some recent results. It aims at summarizing the main results and conclusions with regard to the advantages and disadvantages in these two types of magnetic fusion devices. The comparison includes basic magnetic configurations, magnetohydrodynamic (MHD instabilities, operational limits and disruptions, neoclassical and turbulent transport, confinement scaling and isotopic effects, plasma rotation, and edge and divertor physics. Finally, a concept of quasi-symmetric stellarators is briefly referred along with a comparison of future application for fusion reactors.
Electron temperature gradient driven instability in the tokamak boundary plasma
Energy Technology Data Exchange (ETDEWEB)
Xu, X.Q.; Rosenbluth, M.N.; Diamond, P.H.
1992-12-15
A general method is developed for calculating boundary plasma fluctuations across a magnetic separatrix in a tokamak with a divertor or a limiter. The slab model, which assumes a periodic plasma in the edge reaching the divertor or limiter plate in the scrape-off layer(SOL), should provide a good estimate, if the radial extent of the fluctuation quantities across the separatrix to the edge is small compared to that given by finite particle banana orbit. The Laplace transform is used for solving the initial value problem. The electron temperature gradient(ETG) driven instability is found to grow like t{sup {minus}1/2}e{sup {gamma}mt}.
International Nuclear Information System (INIS)
Krasheninnikov, S.I.; Pigarov, A.Yu.; Soboleva, T.K.; Sigmar, D.J.
1997-01-01
We investigate the influence of hydrogen molecules on plasma recombination using a collisional-radiative model for multispecies hydrogen plasmas and tokamak detached divertor parameters. The rate constant found for molecular activated recombination of a plasma can be as high as 2 x 10 -10 cm 3 /s, confirming our pervious estimates. We investigate the effects of hydrogen molecules and plasma recombination on self-consistent plasma-neutral gas interactions in the recycling region of a tokamak divertor. We treat the plasma flow in a fluid approximation retaining the effects of plasma recombination and employing a Knudsen neutral transport model for a 'gas box' divertor geometry. For the model of plasma-neutral interactions we employ we find: (a) molecular activated recombination is a dominant channel of divertor plasma recombination; and (b) plasma recombination is a key element leading to a decrease in the plasma flux onto the target and substantial plasma pressure drop which are the main features of detached divertor regimes. (orig.)
Full Tokamak discharge simulation and kinetic plasma profile control for ITER
International Nuclear Information System (INIS)
Hee Kim, S.
2009-10-01
Understanding non-linearly coupled physics between plasma transport and free-boundary equilibrium evolution is essential to operating future tokamak devices, such as ITER and DEMO, in the advanced tokamak operation regimes. To study the non-linearly coupled physics, we need a simulation tool which can self-consistently calculate all the main plasma physics, taking the operational constraints into account. As the main part of this thesis work, we have developed a full tokamak discharge simulator by combining a non-linear free-boundary plasma equilibrium evolution code, DINA-CH, and an advanced transport modelling code, CRONOS. This tokamak discharge simulator has been used to study the feasibility of ITER operation scenarios and several specific issues related to ITER operation. In parallel, DINA-CH has been used to study free-boundary physics questions, such as the magnetic triggering of edge localized modes (ELMs) and plasma dynamic response to disturbances. One of the very challenging tasks in ITER, the active control of kinetic plasma profiles, has also been studied. In the part devoted to free-boundary tokamak discharge simulations, we have studied dynamic responses of the free-boundary plasma equilibrium to either external voltage perturbations or internal plasma disturbances using DINA-CH. Firstly, the opposite plasma behaviour observed in the magnetic triggering of ELMs between TCV and ASDEX Upgrade has been investigated. Both plasmas experience similar local flux surface expansions near the upper G-coil set and passive stabilization loop (PSL) when the ELMs are triggered, due to the presence of the PSLs located inside the vacuum vessel of ASDEX Upgrade. Secondly, plasma dynamic responses to strong disturbances anticipated in ITER are examined to study the capability of the feedback control system in rejecting the disturbances. Specified uncontrolled ELMs were controllable with the feedback control systems. However, the specifications for fast H-L mode
International Nuclear Information System (INIS)
Kim, Dong-Hwan; Hong, Suk-Ho; Park, Il-Seo; Lee, Hyo-Chang; Kang, Hyun-Ju; Chung, Chin-Wook
2015-01-01
Plasma characteristics in the far scrape-off layer region of tokamak play a crucial role in the stable plasma operation and its sustainability. Due to the huge facility, electrical diagnostic systems to measure plasma properties have extremely long cable length resulting in large stray current. To overcome this problem, a sideband harmonic method was applied to the Korea Superconducting Tokamak Advanced Research tokamak plasma. The sideband method allows the measurement of the electron temperature and the plasma density without the effect of the stray current. The measured plasma densities are compared with those from the interferometer, and the results show reliability of the method
Plasma confinement using biased electrode in the TCABR tokamak
International Nuclear Information System (INIS)
Nascimento, I.C.; Kuznetsov, Y.K.; Severo, J.H.F.; Fonseca, A.M.M.; Elfimov, A.; Bellintani, V.; Machida, M.; Heller, M.V.A.P.; Galvao, R.M.O.; Sanada, E.K.; Elizondo, J.I.
2005-01-01
Experimental data obtained on the TCABR tokamak (R = 0.61 m, a = 0.18 m) with an electrically polarized electrode, placed at r = 0.16 m, is reported in this paper. The experiment was performed with plasma current of 90 kA (q 3.1) and hydrogen gas injection adjusted for keeping the electron density at 1.0 x 10 19 m -3 without bias. Time evolution and radial profiles of plasma parameters with and without bias were measured. The comparison of the profiles shows an increase of the central line-averaged density, up to a maximum factor of 2.6, while H α hydrogen spectral line intensity decreases and the C III impurity stays on the same level. The analysis of temporal behaviour and radial profiles of plasma parameters indicates that the confined plasma enters the H-mode regime. The data analysis shows a maximum enhanced energy confinement factor of 1.95, decaying to 1.5 at the maximum of the density, in comparison with predicted Neo-Alcator scaling law values. Indications of transient increase of the density gradient near the plasma edge were obtained with measurements of density profiles. Calculations of turbulence and transport at the Scrape-Off-Layer, using measured floating potentials and ion saturation currents, show a strong decrease in the power spectra and transport. Bifurcation was not observed and the decrease in the saturation current occurs in 50 μs
High speed cine film studies of plasma behaviour and plasma surface interactions in tokamaks
International Nuclear Information System (INIS)
Goodall, D.H.J.
1982-01-01
High speed cine photography is a useful diagnostic aid for studying plasma behaviour and plasma surface interactions. Several workers have filmed discharges in tokamaks including ASDEX, DITE, DIVA, ISX, JFT2, TFR and PLT. These films are discussed and examples given of the observed phenomena which include plasma limiter interactions, diverted discharges, disruptions, magnetic islands and moving glowing objects often known as 'UFOs'. Examples of plasma structures in ASDEX and DITE not previously published are also given. The paper also reports experiments in DITE to determine the origin of UFOs. (orig.)
High speed cine film studies of plasma behaviour and plasma surface interactions in tokamaks
Energy Technology Data Exchange (ETDEWEB)
Goodall, D.H.J. (Euratom/UKAEA Fusion Association, Abingdon (UK). Culham Lab.)
High speed cine photography is a useful diagnostic aid for studying plasma behaviour and plasma surface interactions. Several workers have filmed discharges in tokamaks including ASDEX, DITE, DIVA, ISX, JFT2, TFR and PLT. These films are discussed and examples given of the observed phenomena which include plasma limiter interactions, diverted discharges, disruptions, magnetic islands and moving glowing objects often known as 'UFOs'. Examples of plasma structures in ASDEX and DITE not previously published are also given. The paper also reports experiments in DITE to determine the origin of UFOs.
Analysis of equilibrium and topology of tokamak plasmas
International Nuclear Information System (INIS)
Milligen, B.P. van.
1991-01-01
In a tokamak, the plasma is confined by means of a magnetic field. There exists an equilibrium between outward forces due to the pressure gradient in plasma and inward forces due to the interaction between currents flowing inside the plasma and the magnetic field. The equilibrium magnetic field is characterized by helical field lines that lie on nested toroidal surfaces of constant flux. The equilibrium yields values for global and local plasma parameters (e.g. plasma position, total current, local pressure). Thus, precise knowledge of the equilibrium is essential for plasma control, for the understanding of many phenomena occurring in the plasma (in particular departures from the ideal equilibrium involving current filamentation on the flux surfaces that lead to the formation of islands, i.e. nested helical flux surfaces), and for the interpretation of many different types of measurements (e.g. the translation of line integrated electron density measurements made by laser beams probing the plasma into a local electron density on a flux surface). The problem of determining the equilibrium magnetic field from external magnetic field measurements has been studied extensively in literature. The problem is 'ill-posed', which means that the solution is unstable to small changes in the measurement data, and the solution has to be constrained in order to stabilize it. Various techniques for handling this problem have been suggested in literature. Usually ad-hoc restrictions are imposed on the equilibrium solution in order to stabilize it. More equilibrium solvers are not able to handle very dissimilar measurement data which means information on the equilibrium is lost. The generally do not allow a straightforward error estimate of the obtained results to be made, and they require large amounts of computing time. This problems are addressed in this thesis. (author). 104 refs.; 42 figs.; 6 tabs
Experimental study of magnetohydrodynamic instabilities in a tokamak plasma
International Nuclear Information System (INIS)
Maeno, Masaki
1981-10-01
The JFT-2 device is a circular tokamak with a major radius of 90 cm and a shell radius of 36 cm. The maximum toroidal magnetic field and plasma current are 1.8 Wb/m 2 and 160 kA, respectively. Some devices are developed to measure the magnetohydrohynamic instability and the radiation loss. Experimental study of the magnetohydrodynamic instability is made to clear the relation between the instability and the radiation loss. The periphery cooling of the main plasma by the radiation loss plays an important role to the growth of the instability. The reduction of the radiation loss power results in the increase of the plasma density and the decrease of the safety factor q sub(a). Plasma disruption limits the increase of the plasma density and the decrease of the safety factor. In high density discharges, enhanced radiation loss power due to the increased plasma-wall interaction plays an important role in the growth of the instability. The m = 2 tearing mode seems to be the most probable cause of the disruption. In low q sub(a) (q sub(a) < 2) discharges, no inhancement of the radiation loss power was observed until disruption. The plasma disrupts at q sub(a) asymptotically equals 2. The m = 2 kink mode is the probable cause of the disruption. Attainable q sub(a) is reduced with decreasing the ratio of shell radius to plasma radius. The possibility of the shell stabilization against m = 2 kink mode is proposed. (author)
International Nuclear Information System (INIS)
Mazzucato, E.
2000-01-01
The next step in the demonstration of the scientific feasibility of a tokamak fusion reactor is a DT burning plasma experiment for the study and control of self-heated plasmas. In this paper, the authors examine the role of the toroidal magnetic field on the confinement of a tokamak plasma in the ELMy H-mode regime--the operational regime foreseen for ITER
Hamiltonian analysis of fast wave current drive in tokamak plasmas
International Nuclear Information System (INIS)
Becoulet, A.; Fraboulet, D.; Giruzzi, G.; Moreau, D.; Saoutic, B.
1993-12-01
The Hamiltonian formalism is used to analyze the direct resonant interaction between the fast magnetosonic wave and the electrons in a tokamak plasma. The intrinsic stochasticity of the electron phase space trajectories is derived, and together with extrinsic de-correlation processes, assesses the validity of the quasilinear approximation for the kinetic studies of fast wave current drive (FWCD). A full-wave resolution of the Maxwell-Vlasov set of equations provides the exact pattern of the wave fields in a complete tokamak geometry, for a realistic antenna spectrum. The local quasilinear diffusion tensor is derived from the wave fields, and is used for a computation of the driven current and deposited power profiles, the current drive efficiency, including possible non-linear effects in the kinetic equation. Several applications of FWCD on existing and future machines are given, as well as results concerning combination of FWCD with other non inductive current drive methods. An analytical expression for the current drive efficiency is given in the high single-pass absorption regimes. (authors). 20 figs., 1 tab., 26 refs
Resistive fluid turbulence and tokamak edge plasma dynamics
International Nuclear Information System (INIS)
Thayer, D.R.; Diamond, P.H.; Ritz, C.P.
1988-01-01
Electrostatic and electromagnetic turbulence has been linked to particle and heat transport in tokamaks. Here we report on several related theoretical and experimental investigations of edge plasma dynamics. The theory of thermally-driven convective cell edge turbulence has been developed to treat the coupling of the radiative-condensation instability to the resistivity-gradient expansion free energy. This model of edge turbulence has led to theoretical understanding of several anomalies in electrostatic edge turbulence found from experiment: that fluctuation levels and transport coefficients are larger than naively expected, that potential fluctuations are significantly larger than the density. Impurity gas-puffing experiments on the TEXT tokamak have been performed to test this theory, and have indicated favorable results. Resistive fluid turbulence models have also been explored and applied in the hope of understanding the extensive edge magnetic fluctuation studies. We discuss models of electromagnetic microtearing turbulence, resistive-pressure-gradient-driven turbulence, and ion temperature gradient driven turbulence. In particular we study the role of resistive fluid turbulence with separatrix effects in the L /yield/ H mode transition. 36 refs., 2 figs
Tokamak-7 operation in experiments with a plasma
International Nuclear Information System (INIS)
Buzanki, V.V.; Bychkov, A.V.; Denisov, V.F.
1982-01-01
The results of experiments with plasma at the Tokamak-7 (T-7) device are presented. The experiments have been carried out with a constant diaphragm of 31,5 cm radius and two movable graphite diaphragms at the 26-28 cm plasma filament radius and 1,6-1,9 T magnetic field. Two stable regimes with 150 and 200 kA and 250 ms discharge current length have been investigated. It is shown that the strongest poloidal filed perturhations have been observed at the beginning of the discharge. Electron plasma temperature Tsub(e) has been determined from the spectrum analysis of soft X radiation by the foil method. Stable plasma regimes with current up to 200 kA, bypass voltage being equal 1,58V electron density -0,5-5,0 x 10 13 cm -3 , Tsub(e)=1,1-1,3 keV ion temperature-490 eV. The range between discharge pulses has reached 3 min. at the discharge current-240 kA. No considerable effect of magnetic field variables on the superconducting magnetic system has been observed
Development of the 'JFT-2' tokamak plasma position control system
International Nuclear Information System (INIS)
Fujisawa, Noboru; Matsuzaki, Yoshimi; Suzuki, Norio; Murai, Katsuji; Suzuki, Satoshi.
1980-01-01
Digital control technique was applied to control the plasma position in the JFT-2 tokamak experiment device. The detail of the JFT-2 is described elsewhere. The plasma position control system consists of a Hitachi control computer, HIDIC 80, and a Hitachi micro-computer, HIDIC 08E. The plasma position is detected by the position control computer, and compared with a preset value. Then, a reference signal is supplied to the micro-computer controlling power source, and the phase control of the thyristor controlling power source is performed. Since the behavior of plasma is very fast, the fast control is required. The control of the thyristor controlling power source is made by direct digital control (DDC). The main component of the hardware of the present system is the micro-computer HIDIC 08E. The software is the direct task system without the operating system (OS). The results of experiments showed that the feedback control of the system worked well. (Kato, T.)
Modelisation of synchrotron radiation losses in realistic tokamak plasmas
International Nuclear Information System (INIS)
Albajar, F.; Johner, J.; Granata, G.
2000-08-01
Synchrotron radiation losses become significant in the power balance of high-temperature plasmas envisaged for next step tokamaks. Due to the complexity of the exact calculation, these losses are usually roughly estimated with expressions derived from a plasma description using simplifying assumptions on the geometry, radiation absorption, and density and temperature profiles. In the present article, the complete formulation of the transport of synchrotron radiation is performed for realistic conditions of toroidal plasma geometry with elongated cross-section, using an exact method for the calculation of the absorption coefficient, and for arbitrary shapes of density and temperature profiles. The effects of toroidicity and temperature profile on synchrotron radiation losses are analyzed in detail. In particular, when the electron temperature profile is almost flat in the plasma center, as for example in ITB confinement regimes, synchrotron losses are found to be much stronger than in the case where the profile is represented by its best generalized parabolic approximation, though both cases give approximately the same thermal energy contents. Such an effect is not included in present approximate expressions. Finally, we propose a seven-variable fit for the fast calculation of synchrotron radiation losses. This fit is derived from a large database, which has been generated using a code implementing the complete formulation and optimized for massively parallel computing. (author)
Plasma features and alpha particle transport in low-aspect ratio tokamak reactor
International Nuclear Information System (INIS)
Xu Qiang; Wang Shaojie
1997-06-01
The results of the experiment and theory from low-aspect ratio tokamak devices have proved that the MHD stability will be improved. Based on present plasma physics and extrapolation to reduced aspect ratio, the feature of physics of low-aspect ratio tokamak reactor is discussed primarily. Alpha particle confinement and loss in the self-justified low-aspect ratio tokamak reactor parameters and the effect of alpha particle confinement and loss for different aspect ratio are calculated. The results provide a reference for the feasible research of compact tokamak reactor. (9 refs., 2 figs., 3 tabs.)
Simulations of Neon Pellets for Plasma Disruption Mitigation in Tokamaks
Bosviel, Nicolas; Samulyak, Roman; Parks, Paul
2017-10-01
Numerical studies of the ablation of neon pellets in tokamaks in the plasma disruption mitigation parameter space have been performed using a time-dependent pellet ablation model based on the front tracking code FronTier-MHD. The main features of the model include the explicit tracking of the solid pellet/ablated gas interface, a self-consistent evolving potential distribution in the ablation cloud, JxB forces, atomic processes, and an improved electrical conductivity model. The equation of state model accounts for atomic processes in the ablation cloud as well as deviations from the ideal gas law in the dense, cold layers of neon gas near the pellet surface. Simulations predict processes in the ablation cloud and pellet ablation rates and address the sensitivity of pellet ablation processes to details of physics models, in particular the equation of state.
Plasma density remote control system of experimental advanced superconductive tokamak
International Nuclear Information System (INIS)
Zhang Mingxin; Luo Jiarong; Li Guiming; Wang Hua; Zhao Dazheng; Xu Congdong
2007-01-01
In Tokamak experiments, experimental data and information on the density control are stored in the local computer system. Therefore, the researchers have to be in the control room for getting the data. Plasma Density Remote Control System (DRCS), which is implemented by encapsulating the business logic on the client in the B/S module, conducts the complicated science computation and realizes the synchronization with the experimental process on the client. At the same time, Web Services and Data File Services are deployed for the data exchange. It is proved in the experiments that DRCS not only meets the requirements for the remote control, but also shows an enhanced capability on the data transmission. (authors)
Determination of the plasma position for its real-time control in the COMPASS tokamak
Energy Technology Data Exchange (ETDEWEB)
Janky, F., E-mail: jankyf@ipp.cas.cz [Institute of Plasma Physics, AS CR, v.v.i., Association EURATOM/IPP.CR, Za Slovankou 3, 182 00 Prague (Czech Republic); Charles University in Prague, Faculty of Mathematics and Physics, V Holesovickach 2, CZ-18000 Prague (Czech Republic); Havlicek, J. [Institute of Plasma Physics, AS CR, v.v.i., Association EURATOM/IPP.CR, Za Slovankou 3, 182 00 Prague (Czech Republic); Charles University in Prague, Faculty of Mathematics and Physics, V Holesovickach 2, CZ-18000 Prague (Czech Republic); Valcarcel, D. [Associacao EURATOM/IST, Instituto de Plasmas e Fusao Nuclear - Laboratorio Associado, Instituto Superior Tecnico, P1049-001 Lisboa (Portugal); Hron, M.; Horacek, J. [Institute of Plasma Physics, AS CR, v.v.i., Association EURATOM/IPP.CR, Za Slovankou 3, 182 00 Prague (Czech Republic); Kudlacek, O. [Czech Technical University, Faculty of Nuclear Sciences and Physical Engineering, Technicka 2, 166 27 Prague (Czech Republic); Panek, R. [Institute of Plasma Physics, AS CR, v.v.i., Association EURATOM/IPP.CR, Za Slovankou 3, 182 00 Prague (Czech Republic); Carvalho, B.B. [Associacao EURATOM/IST, Instituto de Plasmas e Fusao Nuclear - Laboratorio Associado, Instituto Superior Tecnico, P1049-001 Lisboa (Portugal)
2011-10-15
An efficient horizontal and vertical stabilization of the plasma column position are essential for a reliable tokamak operation. Plasma position is generally determined by plasma current, plasma pressure and external vertical and horizontal magnetic fields. Such fields are generated by poloidal field coils and proper algorithm for the current control have to by applied, namely, in case of fast feedback loops. This paper presents a real-time plasma position reconstruction algorithms developed for the COMPASS tokamak. Further, its implementation in the MARTe (Multithreaded Application Real-Time executor) is described and the first results from test of the algorithm for real-time control of horizontal plasma positions are presented.
Modeling of noble gas injection into tokamak plasmas
International Nuclear Information System (INIS)
Morozov, D.Kh.; Yurchenko, E.I.; Lukash, V.E.; Baronova, E.O.; Rozhansky, V.A.; Senichenkov, I.Yu.; Veselova, I.Yu.; Schneider, R.
2005-01-01
Noble gas injection for mitigation of the disruption in DIII-D is simulated. The simulation of the first two stages is performed: of the neutral gas jet penetration through the background plasmas, and of the thermal quench. In order to simulate the first stage the 1.5-dimensional numerical code LLP with improved radiation model for noble gas is used. It is demonstrated that the jet remains mainly neutral and thus is able to penetrate to the central region of the tokamak in accordance with experimental observations. Plasma cooling at this stage is provided by the energy exchange with the jet. The radiation is relatively small, and the plasma thermal energy is spent mainly on the jet expansion. The magnetic surfaces in contact with the jet are cooled significantly. The cooling front propagates towards the plasma center. The simulations of the plasma column dynamics in the presence of moving jet is performed by means of the free boundary transport modeling DINA code. It has been shown that the cooling front is accompanied by strongly localized 'shark fin-like' perturbation in toroidal current density profile. After few milliseconds the jet (together with the current perturbation) achieves the region where safety factor is slightly higher than unity and a new type of the non-local kink mode develops. The unstable kink perturbation is non-resonant for any magnetic surface, both inside the plasma column, and in the vacuum space. The mode disturbs mainly the core region. The growth time of the 'shark fin-like' mode is higher than the Alfven time by a factor of 100 for DIII-D parameters. Hence, the simulation describes the DIII-D experimental results, at least, qualitatively. (author)
Toothbrush probe for instantaneous measurement of radial profile in tokamak boundary plasma
Energy Technology Data Exchange (ETDEWEB)
Uehara, Kazuya; Sengoku, Seio [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Amemiya, Hiroshi
1997-04-01
A new probe for the instantaneous measurement of radial profiles of the boundary scrape-off layer (SOL) plasma has been developed in a tokamak. Five asymmetric double-probe chips are aligned in parallel to a strong magnetic field in the boundary plasma in a tokamak. This probe is named the `toothbrush probe` and can measure the ion temperature as well as the electron temperature and the plasma density in the SOL plasma within only one tokamak plasma shot. First, only one asymmetric probe is mounted on the divertor plate and it is tried to determine the ion temperature. Then, a manufactured toothbrush probe is mounted in the SOL plasma and the radial plasma profiles are simultaneously obtained. Data on the e-folding length of the plasma profile obtained by the toothbrush probe can determine the information on the transport properties such as the diffusion coefficient and the thermal conductivity of electrons and ions. (author)
Langmuir Probe Evaluation of the Plasma Potential in Tokamak Edge Plasma for Non-Maxwellian EEDF
Czech Academy of Sciences Publication Activity Database
Popov, Tsv.K.; Dimitrova, Miglena; Ivanova, P.; Hasan, E.; Horáček, Jan; Dejarnac, Renaud; Stöckel, Jan; Weinzettl, Vladimír; Kovačič, J.
2014-01-01
Roč. 54, č. 3 (2014), s. 267-272 ISSN 0863-1042. [International Workshop on Electric Probes in Magnetized Plasmas/10./. Madrid, 09.07.2013-12.07.2013] R&D Projects: GA MŠk(CZ) LM2011021; GA ČR(CZ) GAP205/12/2327 Institutional support: RVO:61389021 Keywords : Langmuir probe * Plasma potential * First derivative probe technique * Scrape-off-layer * COMPASS tokamak Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 0.838, year: 2014 http://onlinelibrary.wiley.com/doi/10.1002/ctpp.201410076/abstract
The National Spherical Tokamak Experiment at the Princeton Plasma Physics Laboratory
International Nuclear Information System (INIS)
1995-12-01
The Department of Energy (DOE) has prepared an Environmental Assessment (EA), DOE/EA-1108, evaluating the environmental effects of the proposed construction and operation of the National Spherical Tokamak Experiment (NSTX) within the existing C-Stellarator (CS) Building at the Princeton Plasma Physics Laboratory, Princeton, New Jersey. The purpose of the NSTX is to investigate the physics of spherically shaped plasmas as an alternative path to conventional tokamaks for development of fusion energy. Fusion energy has the potential to help compensate for dwindling supplies of fossil fuels and the eventual depletion of fissionable uranium used in present-day nuclear reactors. Construction of the NSTX in the CS Building would require the dismantling and removal of the existing unused Princeton Large Torus (PLT) device, part of which would be reused to construct the NSTX. Based on the analyses in the EA, the DOE has determined that the proposed action does not constitute a major federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969, 42 U.S.C. 4,321 et seq. The preparation of an Environmental Impact Statement is not required. Thus, the DOE is issuing a FONSI pursuant to the Council on Environmental Quality regulations implementing NEPA (40 CFR Parts 1500--1508) and the DOE NEPA implementing regulations (10 CFR Part 1021)
Plasma pressure in the discharge column of the Novillo Tokamak
International Nuclear Information System (INIS)
Gaytan G, E.
1995-01-01
The design and construction of an acquisition system for the measurement of the plasma pressure in the Novillo Tokamak is described in detail. The system includes a high voltage ramp generator, a hardware and a software interface with a personal computer. It is used to determine experimentally the variations of the pressure in the plasma column in the cleaning and main discharges. The measurement of the pressure is made with a Pirani sensor adapted to the acquisition hardware and synchronized with the discharge in the plasma. The software is made in object oriented programming as a graphic interface designed to be used easily. It controls the acquisition, records the data, displays in graphic form the results and save the measurements. The graphic interface is a building block that can be used in different acquisition tasks. The ramp generator can deliver a signal of 200 V peak to peak with a current of 200 m A and offset control. The acquisition time is 2.5 μ s for every measurement, 8192 measurements can be stored in the acquisition board for every discharge. (Author)
Reactor aspects of counterstreaming-ion tokamak plasmas
International Nuclear Information System (INIS)
Jassby, D.L.
1975-06-01
Toroidal DT plasmas in which the D and T ions make up two distinct, quasi-thermal velocity distributions, oppositely displaced in velocity along the magnetic axis, are discussed. Such counterstreaming distributions can be set up by introducing all ions by tangential injection of neutral beams, and by removing ions from the plasma shortly after they have decelerated to an energy approximate to or less than 2T/sub e/ by Coulomb drag on the plasma electrons. A simple physical model for counterstreaming-ion operation is postulated, which allows one to deduce the ion velocity distributions and required energy and particle confinement times that are in good agreement with the results of previous Fokker-Planck calculations. The variations of fusion reactivity, power gain, and power density with injection energy and electron temperature are presented. The practical problems of implementing counter-streaming operation in a tokamak, such as charge-exchange losses, the prompt removal of cold ions, and the effect of impurities are discussed. (U.S.)
Internal transport barrier in tokamak and helical plasmas
Ida, K.; Fujita, T.
2018-03-01
The differences and similarities between the internal transport barriers (ITBs) of tokamak and helical plasmas are reviewed. By comparing the characteristics of the ITBs in tokamak and helical plasmas, the mechanisms of the physics for the formation and dynamics of the ITB are clarified. The ITB is defined as the appearance of discontinuity of temperature, flow velocity, or density gradient in the radius. From the radial profiles of temperature, flow velocity, and density the ITB is characterized by the three parameters of normalized temperature gradient, R/{L}T, the location, {ρ }{ITB}, and the width, W/a, and can be expressed by ‘weak’ ITB (small R/{L}T) or ‘strong’ (large R/{L}T), ‘small’ ITB (small {ρ }{ITB}) or ‘large’ ITB (large {ρ }{ITB}), and ‘narrow’ (small W/a) or ‘wide’ (large W/a). Three key physics elements for the ITB formation, radial electric field shear, magnetic shear, and rational surface (and/or magnetic island) are described. The characteristics of electron and ion heat transport and electron and impurity transport are reviewed. There are significant differences in ion heat transport and electron heat transport. The dynamics of ITB formation and termination is also discussed. The emergence of the location of the ITB is sometimes far inside the ITB foot in the steady-state phase and the ITB region shows radial propagation during the formation of the ITB. The non-diffusive terms in momentum transport and impurity transport become more dominant in the plasma with the ITB. The reversal of the sign of non-diffusive terms in momentum transport and impurity transport associated with the formation of the ITB reported in helical plasma is described. Non-local transport plays an important role in determining the radial profile of temperature and density. The spontaneous change in temperature curvature (second radial derivative of temperature) in the ITB region is described. In addition, the key parameters of the control of the
Experimental device for the X-ray energetic distribution measurement in a tokamak plasma
International Nuclear Information System (INIS)
Perez-Navarro, A.
1977-01-01
An experimental system to measure the X-ray spectrum in a tokamak plasma is described, emphasizing its characteristics: resolution, dead time and the pulse pile-up distortion effects on the X-ray spectra. (author) [es
Study of plasma turbulence by ultrafast sweeping reflectometry on the Tore Supra Tokamak
International Nuclear Information System (INIS)
Hornung, Gregoire
2013-01-01
The performance of a fusion reactor is closely related to the turbulence present in the plasma. The latter is responsible for anomalous transport of heat and particles that degrades the confinement. The measure and characterization of turbulence in tokamak plasma is therefore essential to the understanding and control of this phenomenon. Among the available diagnostics, the sweeping reflectometer installed on Tore Supra allows to access the plasma density fluctuations from the edge to the centre of the plasma discharge with a fine spatial (mm) and temporal resolution (μs), that is of the order of the characteristic turbulence scales.This thesis consisted in the characterization of plasma turbulence in Tore Supra by ultrafast sweeping reflectometry measurements. Correlation analyses are used to quantify the spatial and temporal scales of turbulence as well as their radial velocity. In the first part, the characterization of turbulence properties from the reconstructed plasma density profiles is discussed, in particular through a comparative study with Langmuir probe data. Then, a parametric study is presented, highlighting the effect of collisionality on turbulence, an interpretation of which is proposed in terms of the stabilization of trapped electron turbulence in the confined plasma. Finally, it is shown how additional heating at ion cyclotron frequency produces a significant though local modification of the turbulence in the plasma near the walls, resulting in a strong increase of the structure velocity and a decrease of the correlation time. The supposed effect of rectified potentials generated by the antenna is investigated via numerical simulations. (author) [fr
Pyroelectric detector study and realization measuring the plasma radiated power in a tokamak
International Nuclear Information System (INIS)
Simonet, F.
1981-10-01
The study of a additional heating method and the perfection of impurities rate control and reduction means are presently actively investigated. Petula experiment must demonstrate heating efficiency by high frequency oscillating electromagnetic fields. Impurities will probably dissipate an important part of the ohmic power and electromagnetic power left in plasma. In this report, experimental device is described, which has been realized, and introduced in the tokamak, to measure precisely the energy losses by radiation in the ionized medium. In a first part, tokomak Petula is presented and it is shown how different chemical species can introduce numerously in the discharge gas. In a second part, plasma cooling by photon and fast neutron strong emission is stressed on. In a third part, the measuring device is explained; the detector part is a pyroelectric crystal. In a fourth and last part, results are discussed, insisting on the signal temporal evolution and on the value of the following ratio: power lost by plasma towards the walls/ohmic power left in plasma [fr
Czech Academy of Sciences Publication Activity Database
Svoboda, V.; Kocman, J.; Grover, O.; Krbec, Jaroslav; Stöckel, Jan
96-97, October (2015), s. 974-979 ISSN 0920-3796. [Symposium on Fusion Technology 2014(SOFT-28)/28./. San Sebastián, 29.09.2014-03.10.2014] Institutional support: RVO:61389021 Keywords : tokamak technology * remote participation * plasma stabilization Subject RIV: JF - Nuclear Energetics OBOR OECD: Nuclear related engineering Impact factor: 1.301, year: 2015 http://dx.doi.org/10.1016/j.fusengdes.2015.06.044
Variational methods for studying the evolution of a plasma. Application to Tokamak
International Nuclear Information System (INIS)
Requin, G.
1981-05-01
In the first part of the text, a variational principle is converted into a directly usable form to monitor the evolution of a hot confined plasma. It is shown that the standard form can be be extended to the increasingly complex situations encountered in practice while retaining a simple expression. The very important situation in which a perturbation produces stochastic trajectories is envisaged. It is obvious that useful information on the phenomena associated with stochastic processes can be obtained by applying the preceeding variational principles to the situation in question, provided that certain basic hypotheses are modified. The application of these variational principles was limited to Tokamak. Any magnetic configuration, however, confining hot plasma can be studied using the same standard form delta M by introducing the appropriate angular variables and action. Applications of this method other than those listed for Tokamak are possible. In particular, all the neoclassical phenomena occurring can be dealt with in a relatively simple manner. Non-linear effects with respect to density and temperature gradients could for example be investigated. As far as turbulence theory is concerned, the principles studied can be applied in order to obtain dispersion relations, to calculate transport coefficients and even saturation levels under these complex conditions. Finally, the results of these calculations have led to modifications in experiments associated with projected Tokamak and suggestions for further experiments. The level of ripple that can be admitted for strongly heated machines was examined. The rotating of the plasma in order to decontaminate it by removing heavy impurities was considered together with the practical means necessary to realize this operation. Two divertor schemas were also examined: an H.F. electric field divertor, an ergodic divertor [fr
International Nuclear Information System (INIS)
Pachtman, A.
1986-09-01
Measurements of Extraordinary mode absorption at the electron cyclotron harmonic frequencies are of unique value in high temperature, high density Tokamak plasma diagnostic applications. An experimental study of Extraordinary mode absorption at the semi-opaque second and third harmonics has been performed on the ALCATOR C Tokamak. A narrow beam of submillimeter laser radiation was used to illuminate the plasma in a horizontal plane, providing a continuous measurement of the one-pass, quasi-perpendicular transmission
Anomalous electron streaming due to electrostatic modes in tokamak plasmas
International Nuclear Information System (INIS)
Schultz, S.D.; Bers, A.; Ram, A.K.
1993-01-01
The motion of circulating electrons in a tokamak interacting with electrostatic waves (such as lower-hybrid waves) is given by a guiding center Hamiltonian and studied by numerical integration. The unperturbed motion of electron guiding centers is first shown to be integrable, and, in a manner similar to that used in previous works, a set of action-angle coordinates for the orbits are derived which take into account finite aspect ratio and noncircular plasma cross section. Electrostatic modes in the low-frequency, long-wavelength limit are treated as a perturbation to the guiding center Hamiltonian. The waves are generated with low integral values of the toroidal and poloidal mode numbers n and m and satisfy the approximate lower-hybrid dispersion relation k perpendicular /k parallel ∼ ω pe /ω ∼ 10 1.5 . If the number of modes is greater than three, the electron motion parallel to the magnetic field is observed to be stochastic in the phase-space region where v parallel is near the wave parallel phase velocity. On surfaces with rational values of the safety factor q, superposition of modes with degenerate values of the parallel mode number n + (m/q) is shown to result in electron streaming perpendicular to the magnetic field. The speed and direction of this radial motion are observed to have sinusoidal dependence on the poloidal angle. For models including finite magnetic-field shear, the authors find a limit to the extent of the radial streaming of the electrons. Results for the speed of the electron radial motion for typical tokamak parameters are presented
Effects of orbit squeezing on neoclassical toroidal plasma viscosity in tokamaks
Czech Academy of Sciences Publication Activity Database
Shaing, K.C.; Sabbagh, S.A.; Chu, M.S.; Bécoulet, M.; Cahyna, Pavel
2008-01-01
Roč. 15, č. 8 (2008), 082505-1-082505-8 ISSN 1070-664X Institutional research plan: CEZ:AV0Z20430508 Keywords : plasma boundary layers * plasma instability * plasma magnetohydrodynamics * plasma toroidal confinement * plasma transport processes * Tokamak devices Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 2.427, year: 2008 http://dx.doi.org/10.1063/1.2965146
Runaway electrons in disruptions and perturbed magnetic topologies of tokamak plasmas
International Nuclear Information System (INIS)
Forster, Michael
2012-01-01
Nuclear fusion represents a valuable perspective for a safe and reliable energy supply from the middle of the 21st century on. Currently, the tokamak is the most advanced principle of confining a man-made fusion plasma. The operation of future, reactor sized tokamaks like ITER faces a crucial difficulty in the generation of runaway electrons. The runaway of electrons is a free fall acceleration into the relativistic regime which is known in various kinds of plasmas including astrophysical ones, thunderbolts and fusion plasmas. The tokamak disruption instability can include the conversion of a substantial part of the plasma current into a runaway electron current. When the high energetic runaways are lost, they can strike the plasma facing components at localised spots. Due to their high energies up to a few tens of MeV, the runaways carry the potential to reduce the lifetimes of wall components and even to destroy sensitive, i.e. actively cooled parts. The research for effective ways to suppress the generation of runaway electrons is hampered by the lack of a complete understanding of the physics of the runaways in disruptions. As it is practically impossible to use standard electron detectors in the challenging environment of a tokamak, the experimental knowledge about runaways is limited and it relies on rather indirect techniques of measurement. The main diagnostics used for this PhD work are three reciprocating probes which measure the runaway electrons directly at the plasma edge of the tokamak TEXTOR. A calorimetric probe and a material probe which exploits the signature that a runaway beam impact leaves in the probe were developed in the course of the PhD work. Novel observations of the burst-like runaway electron losses in tokamak disruptions are reported. The runaway bursts are temporally resolved and first-time measurements of the corresponding runaway energy spectra are presented. A characteristic shape and typical burst to burst variations of the
Plasma control issues for an advanced steady state tokamak reactor
International Nuclear Information System (INIS)
Moreau, D.
2001-01-01
This paper deals with specific control issues related to the advanced tokamak scenarios in which rather accurate tailoring of the current density profile is a requirement in connection with the steady state operation of a reactor in a high confinement optimized shear mode. It is found that adequate current profile control can be performed if real-time magnetic flux reconstruction is available through a set of dedicated diagnostics and computers, with sufficient accuracy to deduce the radial profile of the safety factor and of the internal plasma loop voltage. It is also shown that the safety factor can be precisely controlled in the outer half of the plasma through the surface loop voltage and the off-axis current drive power, but that a compromise must be made between the accuracy of the core safety factor control and the total duration of the current and fuel density ramp-up phases, so that the demonstration of the steady state reactor potential of the optimized/reversed shear concept in the Next Step device will demand pulse lengths of the order of one thousand seconds (or more for an ITER-size machine). (author)
International Nuclear Information System (INIS)
Banerjee, Santanu; Manchanda, R.; Chowdhuri, M.B.
2015-01-01
Study of discharge evolution through the different phases of a tokamak plasma shot viz., the discharge initiation, current ramp-up, current flat-top and discharge termination, is essential to address many inherent issues of the operation of a Tokamak. Fast visible imaging of the tokamak plasma can provide valuable insight in this regard. Further, edge turbulence is considered to be one of the quintessential areas of tokamak research as the edge plasma is at the immediate vicinity of the plasma core and plays vital role in the core plasma confinement. The edge plasma also bridges the core and the scrape off layer (SOL) of the tokamak and hence has a bearing on the particle and heat flux escaping the plasma column. Two fast visible imaging systems are installed on the Aditya tokamak. One of the system is for imaging the plasma evolution with a wide angle lens covering a major portion of the vacuum vessel. The imaging fiber bundle along with the objective lens is installed inside a radial re-entrant viewport, specially designed for the purpose. Another system is intended for tangential imaging of the plasma column. Formation of the plasma column and its evolution are studied with the fast visible imaging in Aditya. Features of the ECRH and LHCD operations on Aditya will be discussed. 3D filaments can, be seen at the plasma edge all along the discharge and they get amplified in intensity at the plasma termination phase. Statistical analysis of these filaments, which are essentially plasma blobs will be presented. (author)
Spectral analysis of turbulence propagation mechanisms in solar wind and tokamaks plasmas
International Nuclear Information System (INIS)
Dong, Yue
2014-01-01
This thesis takes part in the study of spectral transfers in the turbulence of magnetized plasmas. We will be interested in turbulence in solar wind and tokamaks. Spacecraft measures, first principle simulations and simple dynamical systems will be used to understand the mechanisms behind spectral anisotropy and spectral transfers in these plasmas. The first part of this manuscript will introduce the common context of solar wind and tokamaks, what is specific to each of them and present some notions needed to understand the work presented here. The second part deals with turbulence in the solar wind. We will present first an observational study on the spectral variability of solar wind turbulence. Starting from the study of Grappin et al. (1990, 1991) on Helios mission data, we bring a new analysis taking into account a correct evaluation of large scale spectral break, provided by the higher frequency data of the Wind mission. This considerably modifies the result on the spectral index distribution of the magnetic and kinetic energy. A second observational study is presented on solar wind turbulence anisotropy using autocorrelation functions. Following the work of Matthaeus et al. (1990); Dasso et al. (2005), we bring a new insight on this statistical, in particular the question of normalisation choices used to build the autocorrelation function, and its consequence on the measured anisotropy. This allows us to bring a new element in the debate on the measured anisotropy depending on the choice of the referential either based on local or global mean magnetic field. Finally, we study for the first time in 3D the effects of the transverse expansion of solar wind on its turbulence. This work is based on a theoretical and numerical scheme developed by Grappin et al. (1993); Grappin and Velli (1996), but never used in 3D. Our main results deal with the evolution of spectral and polarization anisotropy due to the competition between non-linear and linear (Alfven coupling
Collisional boundary layer analysis for neoclassical toroidal plasma viscosity in tokamaks
Czech Academy of Sciences Publication Activity Database
Shaing, K.C.; Cahyna, Pavel; Bécoulet, M.; Park, J.-K.; Sabbagh, S.A.; Chu, M.S.
2008-01-01
Roč. 15, č. 8 (2008), 082506-1-7 ISSN 1070-664X Institutional research plan: CEZ:AV0Z20430508 Keywords : plasma boundary layers * plasma toroidal confinement * Tokamak devices Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 2.427, year: 2008 http://dx.doi.org/10.1063/1.2969434
A DC probe diagnostics for fast electron temperature measurements in tokamak edge plasmas
Czech Academy of Sciences Publication Activity Database
Gunn, J. P.; Devynck, P.; Pascal, J. Y.; Adámek, Jiří; Ďuran, Ivan; Hron, Martin; Stöckel, Jan; Žáček, František; Bařina, O.; Hrach, R.; Vicher, M.
2002-01-01
Roč. 52, č. 10 (2002), s. 1107-1114 ISSN 0011-4626. [Workshop"Role of Electric Fields in Plasma Confinement and Exhaust"/5th./. Montreux, 23.06.2002-24.06.2002] Institutional research plan: CEZ:AV0Z2043910 Keywords : plasma, tokamak Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 0.311, year: 2002
Advanced Probe Measurements of Electron Energy Distribution Functions in CASTOR Tokamak Plasma
Czech Academy of Sciences Publication Activity Database
Popov, T.; Stöckel, Jan; Dejarnac, Renaud; Dimitrova, M.; Ivanova, P.; Naydenova, Tsv.
2006-01-01
Roč. 63, bez (2006), 012002-012003 E-ISSN 1742-6596. [SECOND INTERNATIONAL WORKSHOP AND SUMMER SCHOOL ON PLASMA PHYSICS. Kiten, 03.07.2006-09.07.2006] Institutional research plan: CEZ:AV0Z20430508 Keywords : plasma * tokamak Subject RIV: BL - Plasma and Gas Discharge Physics
Czech Academy of Sciences Publication Activity Database
Van Oost, G.; Bulanin, V.V.; Donné, A.J.H.; Gusakov, E.Z.; Krämer-Flecken, A.; Krupnik, L.I.; Melnikov, A.; Peleman, P.; Razumova, K.; Stöckel, Jan; Vershkov, V.; Altukov, A.B.; Andreev, V.F.; Askinazi, L.G.; Bondarenko, I.S.; Dnestrovskij, A.Yu.; Eliseev, L.G.; Esipov, L.A.; Grashin, S.A.; Gurchenko, A.D.; Hogeweij, G.M.D.; Jachmin, S.; Khrebtov, S.M.; Kouprienko, D.V.; Lysenko, S.E.; Perfilov, S.V.; Petrov, A.V.; Popov, A.Yu.; Reiser, D.; Soldatov, S.; Stepanov, A.Yu.; Telesca, G.; Urazbaev, A.O.; Verdoolaege, G.; Zimmermann, O.
2006-01-01
Roč. 12, č. 6 (2006), s. 14-19 ISSN 1562-6016. [International Conference on Plasma Physics and Technology/11th./. Alushta, 11.9.2006-16.9.2006] Institutional research plan: CEZ:AV0Z20430508 Keywords : tokamak * plasma * improved confinement * turbulence Subject RIV: BL - Plasma and Gas Discharge Physics http:// vant .kipt.kharkov.ua/TABFRAME.html
Dynamics of the edge transport barrier at plasma biasing on the CASTOR tokamak
Czech Academy of Sciences Publication Activity Database
Stöckel, Jan; Spolaore, M.; Peleman, P.; Brotánková, Jana; Horáček, Jan; Dejarnac, Renaud; Devynck, P.; Ďuran, Ivan; Gunn, J. P.; Hron, Martin; Kocan, M.; Martines, E.; Pánek, Radomír; Sharma, A.; Van Oost, G.
2006-01-01
Roč. 12, č. 6 (2006), s. 19-23 ISSN 1562-6016. [International Conference on Plasma Physics and Technology/11th./. Alushta, 11.9.2006-16.9.2006] Institutional research plan: CEZ:AV0Z20430508 Keywords : tokamak * plasma * transport barrier * relaxations Subject RIV: BL - Plasma and Gas Discharge Physics http:// vant .kipt.kharkov.ua/TABFRAME.html
International Nuclear Information System (INIS)
Meglicki, Z.
1995-01-01
We describe in detail the implementation of a weighted differences code, which is used to simulate a tokamak using the Maschke-Perrin solution as an initial condition. The document covers the mainlines of the program and the most important problem-specific functions used in the initialization, static tests, and dynamic evolution of the system. The mathematics of the Maschke-Perrin solution is discussed in parallel with its realisation within the code. The results of static and dynamic tests are presented in sections discussing their implementation.The code can also be obtained by ftp -anonymous from cisr.anu.edu.au Directory /pub/papers/meglicki/src/tokamak. This code is copyrighted. (author). 13 refs
International Nuclear Information System (INIS)
Begrambekov, L.; Brosset, C.; Bucalossi, J.; Delchambre, E.; Gunn, J.P.; Grisolia, C.; Lipa, M.; Loarer, T.; Mitteau, R.; Moner-Garbet, P.; Pascal, J.-Y.; Shigin, P.; Titov, N.; Tsitrone, E.; Vergazov, S.; Zakharov, A.
2007-01-01
The uniform layer with thickness at least 50-100 μm was found on the CFC tiles from the inboard midplane after more than four years of tokamak operation. The upper part of the uniform layer was amorphous, but at the depth of ∼5 μm a structure consisting of micro-size regions with aromatic chains located parallel to the surface was found. Gradual transition from uniform layer to underlying CFC structure was observed. The reciprocating material probe was used for installation of CFC samples in the Tore Supra deuterium plasma. The thermal desorptional spectra of these samples are compared with the spectra of the samples irradiated in the laboratory stand and with the spectra of hydrogenated carbon film. The peculiarities of hydrogen isotope trapping under plasma irradiation and at the atmosphere are presented and discussed
ICRF fundamental minority heating in inhomogeneous tokamak plasmas
International Nuclear Information System (INIS)
Romero, H.; Scharer, J.
1987-01-01
A theoretical model for the investigation of the ICRF fundamental minority plasma heating scheme in tokamak configurations is developed. The wave differential operator is obtained by including in a self-consistent manner the effects of strong wave damping, linear mode conversion and a one-dimensional non-uniform equilibrium configuration. It is found that the use of a self-consistent equilibrium distribution function yields important modifications of the ICRF wave differential operator applicable to this heating regime. In particular, the paper presents a set of new terms which are resonant at the fundamental cyclotron frequency and which ensure the self-adjointness of the resulting wave operator in the limit k parallel -> 0. A numerical scheme is developed with which solutions for the ICRF electromagnetic field and the corresponding power deposition and energy flux profiles can be obtained. An extensive parametric study is carried out for a range of wave and plasma parameters illustrative of current and proposed JET operating regimes. The results are considerably different from those obtained using a WKB fast wave model. In particular, the 'full wave' model presented in this paper yields a percentage for the wave power absorbed by the ionic species which is much larger than the one predicted by the WKB theory. The model presented also shows that the majority species can absorb a much higher proportion of the incident wave power than previously reported. Finally, the results obtained for JET indicate that in the case of low magnetic field incidence a sizeable percentage of the launched wave energy can be reflected on the fast wave branch for values of k parallel -1 and that at higher plasma temperatures electron heating becomes appreciable. (author)
Interaction of a spheromak-like compact toroid with a high beta spherical tokamak plasma
International Nuclear Information System (INIS)
Hwang, D.Q.; McLean, H.S.; Baker, K.L.; Evans, R.W.; Horton, R.D.; Terry, S.D.; Howard, S.; Schmidt, G.L.
2000-01-01
Recent experiments using accelerated spheromak-like compact toroids (SCTs) to fuel tokamak plasmas have quantified the penetration mechanism in the low beta regime; i.e. external magnetic field pressure dominates plasma thermal pressure. However, fusion reactor designs require high beta plasma and, more importantly, the proper plasma pressure profile. Here, the effect of the plasma pressure profile on SCT penetration, specifically, the effect of diamagnetism, is addressed. It is estimated that magnetic field pressure dominates penetration even up to 50% local beta. The combination of the diamagnetic effect on the toroidal magnetic field and the strong poloidal field at the outer major radius of a spherical tokamak will result in a diamagnetic well in the total magnetic field. Therefore, the spherical tokamak is a good candidate to test the potential trapping of an SCT in a high beta diamagnetic well. The diamagnetic effects of a high beta spherical tokamak discharge (low aspect ratio) are computed. To test the penetration of an SCT into such a diamagnetic well, experiments have been conducted of SCT injection into a vacuum field structure which simulates the diamagnetic field effect of a high beta tokamak. The diamagnetic field gradient length is substantially shorter than that of the toroidal field of the tokamak, and the results show that it can still improve the penetration of the SCT. Finally, analytic results have been used to estimate the effect of plasma pressure on penetration, and the effect of plasma pressure was found to be small in comparison with the magnetic field pressure. The penetration condition for a vacuum field only is reported. To study the diamagnetic effect in a high beta plasma, additional experiments need to be carried out on a high beta spherical tokamak. (author)
Neoclassical Simulation of Tokamak Plasmas using Continuum Gyrokinetc Code TEMPEST
International Nuclear Information System (INIS)
Xu, X Q
2007-01-01
We present gyrokinetic neoclassical simulations of tokamak plasmas with self-consistent electric field for the first time using a fully nonlinear (full-f) continuum code TEMPEST in a circular geometry. A set of gyrokinetic equations are discretized on a five dimensional computational grid in phase space. The present implementation is a Method of Lines approach where the phase-space derivatives are discretized with finite differences and implicit backwards differencing formulas are used to advance the system in time. The fully nonlinear Boltzmann model is used for electrons. The neoclassical electric field is obtained by solving gyrokinetic Poisson equation with self-consistent poloidal variation. With our 4D (ψ, θ, ε, μ) version of the TEMPEST code we compute radial particle and heat flux, the Geodesic-Acoustic Mode (GAM), and the development of neoclassical electric field, which we compare with neoclassical theory with a Lorentz collision model. The present work provides a numerical scheme and a new capability for self-consistently studying important aspects of neoclassical transport and rotations in toroidal magnetic fusion devices
3D field induced collisionless zonal flow decay in tokamak plasmas
Choi, G. J.; Hahm, T. S.
2018-02-01
We perform a gyrokinetic study of 3D resonant magnetic perturbation (RMP) field effect on zonal flows in tokamak plasmas. The result indicates that energy-dependent secular radial drift of particles due to the tangential component (δ B_\\Vert ) of the RMP field induces a further long term algebraic decay of the Rosenbluth–Hinton (1998 Phys. Rev. Lett. 80 724) residual flow expected in an axisymmetric tokamak. This mechanism could be related to an increase of H-mode transition power threshold in the presence of RMP observed in many tokamak experiments.
Energy Technology Data Exchange (ETDEWEB)
Tagle, J.A.; Loarte, A.
1994-01-01
In the last two years some scientifical and technological developments in fusion energy have contributed to consider this energy as an alternative source of electric power energy. The Physics plasma laboratory of Princeton University worked with plasma of 50% deuterium and 50% tritium and produced 3 Mw of fusion power. The Tokamak Fusion Test Reactor (TFTR) opens a new way to find new energy sources.
Study of electron density and its fluctuations in tokamaks plasmas by fast infrared interferometry
International Nuclear Information System (INIS)
Ryter, F.
1982-10-01
The electron density knowledge in tokamak plasma is fundamental for controlled fusion research. Its study can be made by interferometric measurement of plasma refraction index. Density and density fluctuation measurements are given for present and future tokamak, the wavelength used must be in the far infrared. The interferometer used type employs two identical lasers. Waveguide type submillimetric lasers, optically pumped by a CO 2 laser, have been developed and optimized. Detectors used are Schottky diodes. The interferometer allows a radial study of the plasma and presents a great stability during the measurement [fr
International Nuclear Information System (INIS)
Barbosa, Luis Filipe F.P.W.; Bosco, Edson del.
1994-01-01
This report presents the project and analysis of the circuit for production of the toroidal magnetic field in the Tokamak ETE (Spherical Tokamak Experiment). The ETE is a Tokamak with a small-aspect-ratio parameter to be used for studying the plasma physics for the research on thermonuclear fusion. This machine is being constructed at the Laboratorio Associado de Plasma (LAP) of the Instituto Nacional de Pesquisas Espaciais (INPE) in Sao Jose dos Campos, SP, Brazil. (author). 20 refs., 39 figs., 4 tabs
Czech Academy of Sciences Publication Activity Database
Sentkerestiová, Jana; Ďuran, Ivan; Dufková, Edita; Weinzettl, Vladimír
2006-01-01
Roč. 56, suppl.B (2006), s. 138-144 ISSN 0011-4626. [Symposium on Plasma Physics and Technology/22nd./. Praha, 26.6.2006-29.6.2006] R&D Projects: GA AV ČR KJB100430504 Institutional research plan: CEZ:AV0Z20430508 Keywords : Hall probes * plasma position * plasma * tokamak Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 0.568, year: 2006
Electron density and temperature determination in a Tokamak plasma using light scattering
International Nuclear Information System (INIS)
Perez-Navarro Gomerz, A.; Zurro Hernandez, B.
1976-01-01
A theoretical foundation review for light scattering by plasmas is presented. Furthermore, we have included a review of the experimental methods for electron density and temperature measurements, with spatial and time resolution, in a Tokamak plasma using spectral analysis of the scattered radiation. (Author) 13 refs
Electron density and temperature determination in a Tokamak plasma using light scattering
International Nuclear Information System (INIS)
Perez-Navarro Gomez, A.; Zurro Hernandez, B.
1976-01-01
A theoretical foundation review for light scattering by plasmas is presented. Furthemore, a review of the experimental methods for electron density and temperature measurements, with spatial and time resolution, is included in a Tokamak plasma using spectral analysis of the scattered radiation. (author) [es
Experimental observation of current generation by asymmetrical heating of ions in a tokamak plasma
International Nuclear Information System (INIS)
Gahl, J.; Ishihara, O.; Wong, K.L.; Kristiansen, M.; Hagler, M.
1986-01-01
The first experimental observation of current generation by asymmetrical heating of ions is reported. Ions were asymmetrically heated by a unidirectional fast Alfven wave launched by a slow wave antenna inside a tokamak. Current generation was detected by measuring the asymmetry of the toroidal plasma current with probes at the top and bottom of the toroidal plasma column
Electron cyclotron absorption in Tokamak plasmas in the presence of radial transport of particles
International Nuclear Information System (INIS)
Rosa, Paulo R. da S.; Ziebell, Luiz F.
1998-01-01
We use quasilinear theory to study effects of particle radial transport on the electron cyclotron absorption coefficient by a current carrying plasma, in a tokamak modelated as a plasma slab. Our numerical results indicate significant modification in the profile of the electron cyclotron absorption coefficient when transport is taken into account relative to the situation without transport. (author)
Energy Technology Data Exchange (ETDEWEB)
Colunga S, S
1990-07-15
In this report the simplified analysis of a method to detect the movement of the plasma column of a tokamak in the vertical direction and of the biggest radius is given. The peculiar case of the Tokamak Novillo of the Plasma Physics Laboratory of the ININ is studied. (Author)
DAMAVAND - An Iranian tokamak with a highly elongated plasma cross-section
International Nuclear Information System (INIS)
Amrollahi, R.
1997-01-01
The ''DAMAVAND'' facility is an Iranian Tokamak with a highly elongated plasma cross-section and with a poloidal divertor. This Tokamak has the advantage to allow the plasma physics research under the conditions similar to those of ITER magnetic configuration. For example, the opportunity to reproduce partially the plasma disruptions without sacrificing the studies of: equilibrium, stability and control over the elongated plasma cross-section; processes in the near-wall plasma; auxiliary heating systems, etc. The range of plasma parameters, the configuration of ''DAMAVAND'' magnetic coils and passive loops, and their location within the vacuum chamber allow the creation of the plasma at the center of the vacuum chamber and the production of two poloidal volumes (upper and lower) for the divertor. (author)
International Nuclear Information System (INIS)
Colunga S, S.
1990-07-01
In this report the simplified analysis of a method to detect the movement of the plasma column of a tokamak in the vertical direction and of the biggest radius is given. The peculiar case of the Tokamak Novillo of the Plasma Physics Laboratory of the ININ is studied. (Author)
Energy Technology Data Exchange (ETDEWEB)
Andrade, Maria Celia Ramos; Ludwig, Gerson Otto [Instituto Nacional de Pesquisas Espaciais (INPE), Sao Jose dos Campos, SP (Brazil). Lab. Associado de Plasma]. E-mail: mcr@plasma.inpe.br
2004-07-01
Different bootstrap current formulations are implemented in a self-consistent equilibrium calculation obtained from a direct variational technique in fixed boundary tokamak plasmas. The total plasma current profile is supposed to have contributions of the diamagnetic, Pfirsch-Schlueter, and the neoclassical Ohmic and bootstrap currents. The Ohmic component is calculated in terms of the neoclassical conductivity, compared here among different expressions, and the loop voltage determined consistently in order to give the prescribed value of the total plasma current. A comparison among several bootstrap current models for different viscosity coefficient calculations and distinct forms for the Coulomb collision operator is performed for a variety of plasma parameters of the small aspect ratio tokamak ETE (Experimento Tokamak Esferico) at the Associated Plasma Laboratory of INPE, in Brazil. We have performed this comparison for the ETE tokamak so that the differences among all the models reported here, mainly regarding plasma collisionality, can be better illustrated. The dependence of the bootstrap current ratio upon some plasma parameters in the frame of the self-consistent calculation is also analysed. We emphasize in this paper what we call the Hirshman-Sigmar/Shaing model, valid for all collisionality regimes and aspect ratios, and a fitted formulation proposed by Sauter, which has the same range of validity but is faster to compute than the previous one. The advantages or possible limitations of all these different formulations for the bootstrap current estimate are analysed throughout this work. (author)
International Nuclear Information System (INIS)
Alladio, F.; Micozzi, P.
1995-12-01
A correlation has been established between the improvement of the energy confinement time observed in some plasma regimes on the DIII-D tokamak (VH modes and shear reversed discharges) and a geometrical characteristic of the plasma column: the Pfirsch-Schluter-like factor, which multiplies the moment of inertia of the magnetic configuration. Such a quantity is generated by the compression that the flux tubes suffer going from the external to the internal part of the torus. Therefore the configurations in which the module of the total magnetic field is more constant upon the magnetic surfaces (near omnigeneous configurations) show a lower value of the moment of inertia. The geometric parameter of Pfirsch-Schluter determines the transient and steady state behaviour of the plasma rotation under the assumption that the anomalous parallel viscosity is greater that the neoclassical one. In this way, also the profile of the part of the radial electric field (and his absolute value) is influenced by the magnetic configuration. The radial electric field, or, at least, his radial derivative, is invoked by many authors as a principal factor in reducing the turbulence (and so the anomalous transport) in magnetically confined plasmas. In particular, DIII-D machine, the highly elongated and triangular plasma discharges that evolve toward the VH-mode show a lower value of the Pfirsch-Schluter quantity and a higher level of the radial electric field; also the shear reversed profiles tend to lower 1+2q 2 in the central region of the plasma column, driving towards very high values of the electric field within the reversal region
Interaction of candidate plasma facing materials with tokamak plasma in COMPASS
Czech Academy of Sciences Publication Activity Database
Matějíček, Jiří; Weinzettl, Vladimír; Macková, Anna; Malinský, Petr; Havránek, Vladimír; Naydenkova, Diana; Klevarová, Veronika; Petersson, P.; Gasior, P.; Hakola, A.; Rubel, M.; Fortuna, E.; Kolehmainen, J.; Tervakangas, S.
2017-01-01
Roč. 493, September (2017), s. 102-119 ISSN 0022-3115. [International Conference on Plasma-Facing Materials and Components for Fusion Applications/15./. Aix-en-Provence, 18.05.2015-22.05.2015] R&D Projects: GA ČR(CZ) GA14-12837S; GA ČR(CZ) GA15-10723S; GA MŠk(CZ) LM2015045; GA MŠk LM2015056 Institutional support: RVO:61389021 ; RVO:61389005 Keywords : erosion * COMPASS tokamak * plasma-material interaction * ion beam analysis Subject RIV: JF - Nuclear Energetics; JF - Nuclear Energetics (UJF-V) OBOR OECD: Nuclear related engineering; Nuclear related engineering (UJF-V) Impact factor: 2.048, year: 2016 http://www.sciencedirect.com/science/article/pii/S0022311517301708
Feedback control of horizontal position and plasma surface shape in a non-circular tokamak
International Nuclear Information System (INIS)
Moriyama, Shin-ichi; Nakamura, Kazuo; Nakamura, Yukio; Itoh, Satoshi
1986-01-01
The linear model for the coupled horizontal position and plasma surface shape control in the non-circular tokamak device was described. It enables us to estimate easily the displacement and the distortion due to the changes in plasma pressure and current density distribution. The PI-controller and the optimal regulator were designed with the linear model. Transient-response analysis of the control system in the TRIAM-1M tokamak showed that the optimal regulator is superior to the PI-controller with regard to the mutual-interference between the position control system and the elongation control system. (author)
Inertia effects on the rigid displacement approximation of tokamak plasma vertical motion
International Nuclear Information System (INIS)
Carrera, R.; Khayrutdinov, R.R.; Azizov, E.A.; Montalvo, E.; Dong, J.Q.
1991-01-01
Elongated plasmas in tokamaks are unstable to axisymmetric vertical displacements. The vacuum vessel and passive conductors can stabilize the plasma motion in the short time scale. For stabilization of the plasma movement in the long time scale an active feedback control system is required. A widely used method of plasma stability analysis uses the Rigid Displacement Model (RDM) of plasma behavior. In the RDM it is assumed that the plasma displacement is small and usually plasma inertia effects are neglected. In addition, it is considered that no changes in plasma shape, plasma current, and plasma current profile take place throughout the plasma motion. It has been demonstrated that the massless-filament approximation (instantaneous force-balance) accurately reproduces the unstable root of the passive stabilization problem. Then, on the basis that the instantaneous force-balance approximation is correct in the passive stabilization analysis, the massless approximation is utilized also in the study of the plasma vertical stabilization by active feedback. The authors show here that the RDM (without mass effects included) does not provide correct stability results for a tokamak configuration (plasma column, passive conductors, and feedback control coils). Therefore, it is concluded that inertia effects have to be retained in the RDM system of equations. It is shown analytically and numerically that stability diagrams with and without plasma-mass corrections differ significantly. When inertia effects are included, the stability region is more restricted than obtained in the massless approximation
A discrete adaptive near-time optimum control for the plasma vertical position in a Tokamak
Scibile, L
2001-01-01
A nonlinear controller for the plasma vertical position in a Tokamak, based on a discrete-time adaptive near time optimum control algorithm (DANTOC) is designed to stabilize the system and to maximize the state-space region over which stability can be guaranteed. The controller is also robust to the edge localized modes (ELMs) and the 600 Hz noise from the thyristor power supplies that are the primary source of disturbances and measurement noise. The controller is tested in simulation for the JET Tokamak and the results confirm its efficacy in controlling the vertical position for different plasma configurations. The controller is also tested experimentally on a real Tokamak, COMPASS-D, and the results demonstrate the improvement with respect to a simple linear PD controller in the presence of disturbances and measurement noise. The emphasis of the is on the development of the design methodology. (38 refs).
Thermal loads on tokamak plasma-facing components during normal operation and disruptions
International Nuclear Information System (INIS)
McGrath, R.T.
1990-01-01
Power loadings experienced by tokamak plasma-facing components during normal operation and during off-normal events are discussed. A model for power and particle flow in the tokamak boundary layer is presented and model predictions are compared to infrared measurements of component heating. The inclusion of the full three-dimensional geometry of the components and of the magnetic flux surface is very important in the modeling. Experimental measurements show that misalignment of component armour tile surfaces by only a millimeter can lead to significant localized heating. An application to the design of plasma-facing components for future machines is presented. Finally, thermal loads expected during tokamak disruptions are discussed. The primary problems are surface melting and vaporization due to localized intense heating during the disruption thermal quench and volumetric heating of the component armour and structure due to localised impact of runaway electrons. (author)
Neutral-beam deposition in large, finite-beta noncircular tokamak plasmas
International Nuclear Information System (INIS)
Wieland, R.M.; Houlberg, W.A.
1982-02-01
A parametric pencil beam model is introduced for describing the attenuation of an energetic neutral beam moving through a tokamak plasma. The nonnegligible effects of a finite beam cross section and noncircular shifted plasma cross sections are accounted for in a simple way by using a smoothing algorithm dependent linearly on beam radius and by including information on the plasma flux surface geometry explicitly. The model is benchmarked against more complete and more time-consuming two-dimensional Monte Carlo calculations for the case of a large D-shaped tokamak plasma with minor radius a = 120 cm and elongation b/a = 1.6. Deposition profiles are compared for deuterium beam energies of 120 to 150 keV, central plasma densities of 8 x 10 13 - 2 x 10 14 cm -3 , and beam orientation ranging from perpendicular to tangential to the inside wall
Fast ions and momentum transport in JET tokamak plasmas
Energy Technology Data Exchange (ETDEWEB)
Salmi, A.
2012-07-01
Fast ions are an inseparable part of fusion plasmas. They can be generated using electromagnetic waves or injected into plasmas as neutrals to heat the bulk plasma and to drive toroidal rotation and current. In future power plants fusion born fast ions deliver the main heating into the plasma. Understanding and controlling the fast ions is of crucial importance for the operation of a power plant. Furthermore, fast ions provide ways to probe the properties of the thermal plasma and get insight of its confinement properties. In this thesis, numerical code packages are used and developed to simulate JET experiments for a range of physics issues related to fast ions. Namely, the clamping fast ion distribution at high energies with RF heating, fast ion ripple torque generation and the toroidal momentum transport properties using NBI modulation technique are investigated. Through a comparison of numerical simulations and the JET experimental data it is shown that the finite Larmor radius effects in ion cyclotron resonance heating are important and that they can prevent fast ion tail formation beyond certain energy. The identified mechanism could be used for tailoring the fast ion distribution in future experiments. Secondly, ASCOT simulations of NBI ions in a ripple field showed that most of the reduction of the toroidal rotation that has been observed in the JET enhanced ripple experiments could be attributed to fast ion ripple torque. Finally, fast ion torque calculations together with momentum transport analysis have led to the conclusion that momentum transport in not purely diffusive but that a convective component, which increases monotonically in radius, exists in a wide range of JET plasmas. Using parameter scans, the convective transport has been shown to be insensitive to collisionality and q-profile but to increase strongly against density gradient. (orig.)
Quasilinear kinetic modeling of RMP penetration into a tokamak plasma
International Nuclear Information System (INIS)
Heyn, M.F.; Kernbichler, W.; Leitner, P.; Ivanov, I.B.; Kasilov, S.V.
2013-01-01
The linear as well as the quasilinear problem of RMP penetration in tokamaks is solved consistently with a particle and energy conserving collision operator. The new collision operator ensures the Onsager symmetry of the quasilinear transport coefficient matrix and avoids artifacts such as fake heat convection connected with simplified collision models.
Energy Technology Data Exchange (ETDEWEB)
Schmitz, D.
2006-07-15
Within the scope of this work itermittent events in the plasma edge of the tokamak TEXTOR were characterized. For the data of measurements of the density and the poloidal electrical field were analysed. The data was collected by a reciprocating and a fixed probe as well as by a lithium beam. The intermittent behaviour was quantified by the statistical moments of the data. If intermittency is high, coherent structures (also called blobs) can be detected. The detected blobs were described using the statistical method of conditional averaging. The main results can be summarised as follows: Intermittent behavoiur has been detected in the scrap off layer of the tokamak TEXTOR and it is increasing with the radius from the last closed flux surface (LCFS) on. On the midplane the blobs in the limiter geometry have a radial size of up to 8 cm and move onto the wall with velocities as high as (1-7)% of the ion sound speed. It was found that intermittent transport causes 40% of the total perpendicular transport in the investigated discharges. In the upper part of the tokamak there is less intermittency. This is reasonable if intermittency is caused by interchange instabilities which mainly occur on the low field side of the tokamak. With the Dynamic Ergodic Divertor (DED) and the associated formation of tearing modes intermittency is increasing. This can also be due to the steeper gradient of density in the scrap off layer close to the LCFS which is caused by gas puffing used for the regulation of the density. Outside the LCFS the ergodic field does not have any influence on the characteristics of blobs. Within the LCFS density holes have been found which propagate towards the centre of the plasma. The radial transport due to blobs is still the same. In general the velocity of the detected blobs is proportional to the square root of their poloidal size. That confirms the prediction of the blob model in which the nonlinear development of interchange instabilities causes the
Large potential change induced by pellet injection in JIPP T-IIU tokamak plasmas
International Nuclear Information System (INIS)
Hamada, Y.; Sato, K.N.; Sakakita, H.
1995-05-01
A large, rapid change in the local plasma potential is found to be induced by off-axis hydrogen ice-pellet injection into a tokamak plasma. The polarity of the rapid change is reversed when the pellet is injected into the upper and lower halves of the poloidal plasma cross-section. This change can be interpreted as being due to the gradient-B drift of particles in the high-density plasmas of the pellet cloud, before the increase of the plasma density due to the ablation becomes uniform on the magnetic surface. (author)
Energy Technology Data Exchange (ETDEWEB)
Perez-Navarro Gomerz, A.; Zurro Hernandez, B.
1976-07-01
A theoretical foundation review for light scattering by plasmas is presented. Furthermore, we have included a review of the experimental methods for electron density and temperature measurements, with spatial and time resolution, in a Tokamak plasma using spectral analysis of the scattered radiation. (Author) 13 refs.
Plasma fluctuation measurements in tokamaks using beam-plasma interactions (abstract)
International Nuclear Information System (INIS)
Fonck, R.J.; Duperrex, P.A.; Paul, S.F.
1990-01-01
High-frequency observations of light emitted from the interactions between plasma ions and injected neutral beam atoms allow the measurement of moderate-wavelength fluctuations in plasma and impurity ion densities. To detect turbulence in the local plasma ion density, the collisionally excited fluorescence from a neutral beam is measured either separately at several spatial points or with a multichannel imaging detector. Similarly, the role of impurity ion density fluctuations is measured using charge exchange recombination excited transitions emitted by the ion species of interest. This technique can access the relatively unexplored region of long-wavelength plasma turbulence with k perpendicular ρ i much-lt 1, and hence complements measurements from scattering experiments. Optimization of neutral beam geometry and optical sightlines can result in very good localization and resolution (Δx≤1 cm) in the hot plasma core region. The detectable fluctuation level is determined by photon statistics, atomic excitation processes, and beam stability, but can be as low as 0.2% in a 100 kHz bandwidth over the 0--1 MHz frequency range. The choices of beam species (e.g., H 0 , He 0 , etc.), observed transition (e.g., H α , L α , He I singlet or triplet transitions, C VI Δn=1, etc.) are dictated by experiment-specific factors such as optical access, flexibility of beam operation, plasma conditions, and detailed experimental goals. Initial tests on the PBX-M tokamak using the H α emissions from a heating neutral beam show low-frequency turbulence in the edge plasma region
Highly ionized xenon spectra (95-260 Angstroms) excited in TFR Tokamak plasmas
International Nuclear Information System (INIS)
Breton, C.; Demichelis, C.; Hecq, W.; Mattioli, M.; Ramette, J.; Saoutic, B.; Bauche-Arnoult, C.; Bauche, J.; Wyart, J.F.
1987-06-01
The Xe spectrum in the 95-260 Angstroms spectral region, excited in TFR Tokamak plasmas, has been recorded by a grazing incidence multichannel spectrometer. Several lines in the Cu- and Zn-like isoelectronic sequences as well as a broad band (due to the superposition of unresolved transition arrays strongly mixed by configuration interaction) have been identified
Effects of density asymmetries on heavy-impurity transport in a rotating tokamak-plasma
International Nuclear Information System (INIS)
Romanelli, M.; Ottaviani, M.
1997-12-01
The transport equations of heavy trace-impurities in a Tokamak plasma with strong toroidal rotation have been studied analytically in the collisional regime. It is found that the poloidal asymmetry of the impurity-density, which occurs because of the rotation, brings about a large enhancement of the diffusivity and indeed of the pinch velocity above the conventional Pfirsh-Schlueter values. (author)
Energy balance in the TCA tokamak plasma with Alfven wave heating
International Nuclear Information System (INIS)
Ding Ning; Qu Wenxiao; Huang Li; Long Yongxing; Qiu Xiaoming
1993-01-01
The energy balance in TCA tokamak plasma with Alfven wave heating is studied, in which the equivalent electron thermal conductivity is determined by using the profile consistency principle. The results are in good agreement with experiments. It is shown that this method is applicable to various devices and other heating methods
Robust control design for the plasma horizontal position control on J-TEXT Tokamak
International Nuclear Information System (INIS)
Yu, W.Z.; Chen, Z.P.; Zhuang, G.; Wang, Z.J.
2013-01-01
It is extremely important for tokamak to control the plasma position during routine discharge. However, the model of plasma in tokamak usually contains much of the uncertainty, such as structured uncertainties and unmodeled dynamics. Compared with the traditional PID control approach, robust control theory is more suitable to handle this problem. In the paper, we propose a H ∞ robust control scheme to control the horizontal position of plasma during the flat-top phase of discharge on Joint Texas Experimental Tokamak (J-TEXT) tokamak. First, the model of our plant for plasma horizontal position control is obtained from the position equilibrium equations. Then the H ∞ robust control framework is used to synthesize the controller. Based on this, an H ∞ controller is designed to minimize the regulation/tracking error. Finally, a comparison study is conducted between the optimized H ∞ robust controller and the traditional PID controller in simulations. The simulation results of the H ∞ robust controller show a significant improvement of the performance with respect to those obtained with traditional PID controller, which is currently used on our machine
Core-SOL simulations of L-mode tokamak plasma discharges using BALDUR code
Directory of Open Access Journals (Sweden)
Yutthapong Pinanroj
2014-04-01
Full Text Available Core-SOL simulations were carried out of plasma in tokamak reactors operating in a low confinement mode (L-mode, for various conditions that match available experimental data. The simulation results were quantitatively compared against experimental data, showing that the average RMS errors for electron temperature, ion temperature, and electron density were lower than 16% or less for 14 L-mode discharges from two tokamaks named DIII-D and TFTR. In the simulations, the core plasma transport was described using a combination of neoclassical transport calculated by NCLASS module and anomalous transport by Multi-Mode-Model version 2001 (MMM2001. The scrape-off-layer (SOL is the small amount of residual plasma that interacts with the tokamak vessel, and was simulated by integrating the fluid equations, including sources, along open field lines. The SOL solution provided the boundary conditions of core plasma region on low confinement mode (L-mode. The experimental data were for 14 L-mode discharges and from two tokamaks, named DIII-D and TFTR.
International Nuclear Information System (INIS)
Federici, G.; Skinner, C.H.; Brooks, J.N.
2001-01-01
The major increase in discharge duration and plasma energy in a next-step DT fusion reactor will give rise to important plasma-material effects that will critically influence its operation, safety and performance. Erosion will increase to a scale of several cm from being barely measurable at a micron scale in today's tokamaks. Tritium co-deposited with carbon will strongly affect the operation of machines with carbon plasma-facing components. Controlling plasma wall interactions is critical to achieving high performance in present-day tokamaks and this is likely to continue to be the case in the approach to practical fusion reactors. Recognition of the important consequences of these phenomena has stimulated an internationally co-ordinated effort in the field of plasma-surface interactions supporting the engineering design activities of the international thermonuclear experimental reactor project (ITER) and significant progress has been made in better understanding these issues. This paper reviews the underlying physical processes and the existing experimental database of plasma-material interactions both in tokamaks and laboratory simulation facilities for conditions of direct relevance to next-step fusion reactors. Two main topical groups of interactions are considered: (i) erosion/re-deposition from plasma sputtering and disruptions, including dust and flake generation, (ii) tritium retention and removal. The use of modelling tools to interpret the experimental results and make projections for conditions expected in future devices is explained. Outstanding technical issues and specific recommendations on potential R and D avenues for their resolution are presented. (orig.)
The simulation of L-H transition in tokamak plasma using MMM95 transport model
International Nuclear Information System (INIS)
Intharat, P; Poolyarat, N; Chatthong, B; Onjun, T; Picha, R
2015-01-01
BALDUR integrative predictive modelling code together with a Multimode (MMM95) anomalous transport model is used to simulate the evolution profiles, including plasma current, temperature, density and energy in a tokamak reactor. It is found that a self - transition from low confinement mode (L-mode) to high confinement mode (H-mode) regimes can be achieved once a sufficient auxiliary heating applied to the plasma is reached. The result agrees with experimental observations from various tokamaks. A strong reduction of turbulent transport near the edge of plasma is also observed, which is related to the formation of steep radial electric field near the edge regime. From transport analysis, it appears that the resistive ballooning mode is the dominant term near the plasma edge regime, which is significantly reduced during the transition. (paper)
Determination of plasma column transverse section in the TBR-1 tokamak
International Nuclear Information System (INIS)
Conde, M.E.
1986-01-01
The temporal evolution of plasma column transverse section in the TBR-1 tokamak is determined. The experimental melhod is based on the simulation of toroidal current distribution in plasma by a set of toroidal filaments. The currents in these filaments are determined by minimization of square error between the magnetic field produced by filaments and the field measured into the tokamak vacuum vessel. For the measurement of magnetic field, twenty small magnetic coils were constructed and installated in the region protected by current limiters. The plasma column transverse cross section is determined by poloidal field produced by the currents in filaments. The multipole moments of plasma current distribution and the Λ Shafranov parameter were obtained. (M.C.K.) [pt
Measurement of Sheared Flows in the Edge Plasma of the CASTOR Tokamak
Czech Academy of Sciences Publication Activity Database
Brotánková, Jana; Stöckel, Jan; Horáček, Jan; Seidl, Jakub; Ďuran, Ivan; Hron, Martin; Van Oost, G.
2009-01-01
Roč. 35, č. 11 (2009), s. 980-986 ISSN 1063-780X. [IAEA Technical Meeting on Research Using Small Fusion Devices/18th./. Alushta (Krym), 25.09. 2008 -27.09. 2008 ] Institutional research plan: CEZ:AV0Z20430508 Keywords : Tokamak * probe diagnostics * sheared flows * edge plasma * turbulence Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 0.584, year: 2009 http://www.springerlink.com/content/u571504gmq118314/
Profile measurements in the plasma edge of mega amp spherical tokamak using a ball pen probe
Czech Academy of Sciences Publication Activity Database
Walkden, N.R.; Adámek, Jiří; Allan, S.; Dudson, B.D.; Elmore, S.; Fishpool, G.; Harrison, J.; Kirk, A.; Komm, Michael
2015-01-01
Roč. 86, č. 2 (2015), č. článku 023510. ISSN 0034-6748 R&D Projects: GA ČR(CZ) GAP205/12/2327; GA MŠk(CZ) LM2011021 Institutional support: RVO:61389021 Keywords : plasma * tokamak * ball pen probe Subject RIV: BL - Plasma and Gas Discharge Physics OBOR OECD: 2.11 Other engineering and technologies Impact factor: 1.336, year: 2015 http://dx.doi.org/10.1063/1.4908572
A review of the methods to measure the ion temperature in a tokamak plasma
International Nuclear Information System (INIS)
Zurro Hernandez, B.; Perez-Navarro Gomez, A.
1976-01-01
The most important methods to measure the ion temperatu--re in a Tokamak plasma are reviewed, e.g. energy analysis of the fast neutrals which leave out the plasma, Doppler broadening of the emision spectral lines and fusion neutron analysis. It is discussed their bounds so as the advantages and drawbacks of each one. Other methods of some interest in the future are outlined. (author) [es
Isotope effects on L-H threshold and confinement in tokamak plasmas
Maggi, C. F.; Weisen, H.; Hillesheim, J. C.; Chankin, A.; Delabie, E.; Horvath, L.; Auriemma, F.; Carvalho, I. S.; Corrigan, G.; Flanagan, J.; Garzotti, L.; Keeling, D.; King, D.; Lerche, E.; Lorenzini, R.; Maslov, M.; Menmuir, S.; Saarelma, S.; Sips, A. C. C.; Solano, E. R.; Belonohy, E.; Casson, F. J.; Challis, C.; Giroud, C.; Parail, V.; Silva, C.; Valisa, M.; Contributors, JET
2018-01-01
The dependence of plasma transport and confinement on the main hydrogenic ion isotope mass is of fundamental importance for understanding turbulent transport and, therefore, for accurate extrapolations of confinement from present tokamak experiments, which typically use a single hydrogen isotope, to burning plasmas such as ITER, which will operate in deuterium–tritium mixtures. Knowledge of the dependence of plasma properties and edge transport barrier formation on main ion species is critical in view of the initial, low-activation phase of ITER operations in hydrogen or helium and of its implications on the subsequent operation in deuterium–tritium. The favourable scaling of global energy confinement time with isotope mass, which has been observed in many tokamak experiments, remains largely unexplained theoretically. Moreover, the mass scaling observed in experiments varies depending on the plasma edge conditions. In preparation for upcoming deuterium–tritium experiments in the JET tokamak with the ITER-like Be/W Wall (JET-ILW), a thorough experimental investigation of isotope effects in hydrogen, deuterium and tritium plasmas is being carried out, in order to provide stringent tests of plasma energy, particle and momentum transport models. Recent hydrogen and deuterium isotope experiments in JET-ILW on L-H power threshold, L-mode and H-mode confinement are reviewed and discussed in the context of past and more recent isotope experiments in tokamak plasmas, highlighting common elements as well as contrasting observations that have been reported. The experimental findings are discussed in the context of fundamental aspects of plasma transport models.
Generación y dinámica de electrones runaway en plasmas tokamak
Fernández Gómez, Isabel
2016-01-01
La dinámica y generación de electrones runaway en plasmas tokamak constituye el tema central de esta tesis. En un tokamak, el fenómeno runaway es el resultado de la existencia de un campo eléctrico en dirección toroidal. Aquellos electrones cuya velocidad excede un cierto valor crítico se aceleran de forma continua, ya que la e ciencia de las colisiones para disipar la energía ganada en el campo disminuye con la velocidad (∼ ⁻¹) . Se tiene entonces lo que se conoce como un electrón runaway. ...
Control, pressure perturbations, displacements, and disruptions in highly elongated tokamak plasmas
International Nuclear Information System (INIS)
Marcus, F.B.; Hofmann, F.; Tonetti, G.; Jardin, S.C.; Noll, P.
1989-06-01
The control and evolution of highly elongated tokamak plasmas with large growth rates are simulated with the axisymmetric, resistive MHD code TSC in the geometry of the TCV tokamak. Pressure perturbations such as sawteeth and externally programmed displacements create initial velocity perturbations which may be stabilized by low power, rapid response coils inside the passively stabilizing vacuum vessel, together with slower shaping coils outside the vessel. Vertical disruption induced voltages and forces on the rapid coils and vessel are investigated, and a model is proposed for an additional vertical force due to poloidal currents. (author) 6 figs., 1 tab., 26 refs
Plasma behavior with molecular beam injection in the HL-1m tokamak
International Nuclear Information System (INIS)
Yao Lianghua; Tang Nianyi; Cui Zhengying; Xu Deming; Deng Zhongchao; Ding Xuantong; Luo Junlin; Dong Jiafu; Guo Gancheng; Yang Shikun; Cui Chenghe; Xiao Zhenggui; Liu Dequan; Chen Xiaoping; Yan Longwen; Yan Donghai; Wang Enyao; Deng Xiwen
1999-01-01
The authors report effect of the new fueling method of high speed molecular beam injection on Tokamak confinement improvement. The present method is an improvement of conventional gas puffing, with performance comparable to the small pellet injection in HL-1M and also to the slow pellet in ASDEX. The fact that a shallower fueling can lead to similar confinement improvement as a deep one suggests that there may exist a critical position in a Tokamak plasma such that any kind of fueling will have a better confinement as long as it can give rise to density peaking at the critical position
International Nuclear Information System (INIS)
Martin, R.; Manero, F.
1984-01-01
In this paper a description is given of the microwave interferometer used for measuring the plasma electronic density in the TJ-1 Tokamak of Fusion Division of JEN. The principles of the electronic density measurement are discussed in detail, as well as those concerning the determination of density pro files from experimental data. A description of the interferometer used in the TJ-1 Tokamak is given, together with a detailed analysis of the circuits which constitute the measuring chain. The working principles of the klystron reflex and hybrid rings are also presented. (Author) 23 refs
An experimental study of plasma fluctuations in the TCV and TEXTOR Tokamaks
International Nuclear Information System (INIS)
Mejeire de, C. A.
2013-01-01
The main body of this thesis reports on the commissioning and first measurements with a novel tangential phase-contrast imaging (TPCI) diagnostic, which had previously been installed in the TCV tokamak. The instrument measures fluctuations in line-integrated electron density along 9 parallel chords within a 6 cm diameter CO 2 laser beam. TPCI measurements reveal the first evidence in TCV of the geodesic acoustic mode (GAM), which is an oscillating zonal flow. Frequency, radial wavelength, radial extent and propagation are all in qualitative agreement with a gyro-kinetic simulation and recent theoretical work. The mode is found to have a modest, but measurable magnetic component, whose spatial structure is characterised for the first time in a toroidal plasma. For some experiments, clear evidence is found of the theoretically expected m/n = 2/0 mode structure, although in others the structure appears to be more complex. Electron energy confinement in X 2 heated TCV L-mode plasmas had previously been observed to increase on changing the triangularity (δ) of the poloidal plasma cross-section from δ = +0.4 to δ = −0.4. Measurements with the TPCI diagnostic reveal that this change coincides with a clear decrease in both the absolute level and the decorrelation time of broadband electron density fluctuations. This is in agreement with the conjecture that the increased confinement time is caused by a change in the turbulent state. The second part of the thesis reports on a fluctuation study in the TEXTOR tokamak. At sufficiently weak toroidal magnetic field, NBI heated, limited TEXTOR plasmas exhibit bursts of beam-ion driven ‘fishbone’ and Alfvén modes, which are characterised using the multi-antenna reflectometer and Mirnov coils. In H-mode the fishbone triggers ELMs and in L-mode it triggers previously unobserved bursts of particle recycling, resembling the ELMs. The reflectometer phase shows statistically significant bispectral coherence between the fishbone
International Nuclear Information System (INIS)
Gusev, V.K.; Petrov, Yu.V.; Sakharov, N.V.; Semenov, A.A.; Voronin, A.V.
2005-01-01
Results of theoretical and experimental research on the plasma sources and injection of plasma and gas jet produced by the modified source into tokamak Globus-M are presented. An experimental test stand was developed for investigation of intense plasma jet generation. Optimisation of pulsed coaxial accelerator parameters by means of analytical calculations is performed with the aim of achieving the highest flow velocity at limited coaxial electrode length and discharge current. The optimal parameters of power supply to generate a plasma jet with minimal impurity contamination and maximum flow velocity were determined. A comparison of experimental and calculation results is made. Plasma jet parameters are measured, such as: impurity species content, pressure distribution across the jet, flow velocity, plasma density, etc. Experiments on the interaction of a higher kinetic energy plasma jet with the magnetic field and plasma of the Globus-M tokamak were performed. Experimental results on plasma and gas jet injection into different Globus-M discharge phases are presented and discussed. Results are presented on the investigation of plasma jet injection as the source for discharge breakdown, plasma current startup and initial density rise. (author)
Transport and stability studies in negative central shear advanced tokamak plasmas
International Nuclear Information System (INIS)
Jayakumar, R.J.
2003-01-01
Achieving high performance for long duration is a key goal of Advanced Tokamak (AT) research around the world. To this end, tokamak experiments are focusing on obtaining (a) a high fraction of well-aligned non-inductive plasma current (b) wide internal transport barriers (ITBs) in the ion and electron transport channels to obtain high temperatures (c) control of resistive wall modes and neoclassical Tearing Modes which limit the achievable beta. A current profile that yields a negative central magnetic shear (NCS) in the core is consistent with the above focus; Negative central shear is conducive for obtaining internal transport barriers, for high degree of bootstrap current alignment and for reaching the second stability region for ideal ballooning modes, while being stable to ideal kink modes at high beta with wall stabilization. Much progress has been made in obtaining AT performance in several tokamaks through an increasing understanding of the stability and transport properties of tokamak plasmas. RF and neutral beam current drive scenarios are routinely developed and implemented in experiments to access new advanced regimes and control plasma profiles. Short duration and sustained Internal Transport Barriers (ITB) have been obtained in the ion and electron channels. The formation of an ITB is attributable to the stabilization of ion and electron temperature gradient (ITG and ETG) and trapped electron modes (TEM), enhancement of E x B flow shear rate and rarefaction of resonant surfaces near the rational q min values. (orig.)
Investigation of L-H Transitionin Tokamak Plasma Using BALDUR Code
International Nuclear Information System (INIS)
Intharat, P.; Chatthong, B.; Onjun, T.; Poolyarat, N.; Picha, R.
2014-01-01
An investigation of a tokamak plasma phenomenon, called L-H transition, is carried out using a 1.5D BALDUR integrated predictive modeling code. The core transport in these simulations is described using a combination of NCLASS neoclassical transport and MMM95 turbulent transport. The transition can result in a great improvement in plasma performance i.e. plasma temperature and plasma power output. It is found in HL-2A scenarios that when the auxiliary heating is turned on, the power transport across the separatrix is increased and eventually exceeds a threshold value of the transition. Conclusively, the simulations can model this H-mode transition phenomenon.
Experiment study of edge localized mode with plasma vertical jogging in HL-2A tokamak
Wu, N.; Chen, S. Y.; Song, X. M.; Mou, M. L.; Huang, J.; Wang, Z. T.; Tang, C. J.; Song, X.; Xia, F.; Jiang, M.; HL-2A Team
2017-09-01
The effect of plasma vertical jogging on edge localized modes (ELMs) is investigated in HL-2A tokamak. During the experiment, plasma jogging with a period of about 75 ms is performed, and the results show that both the ELM amplitude and period decrease when the plasma moves upward, which are qualitatively explained by the simulation based on the theory of peeling-ballooning mode including the resistivity effect. The upward movement of plasma causes a change in pedestal parameters, and then the dominant toroidal mode shifts to a relatively high-n mode with the effects of resistivity and diamagnetic, which lead to smaller ELM amplitudes.
Reconstruction of plasma current profile of tokamaks using combinatorial optimization techniques
International Nuclear Information System (INIS)
Kishimoto, Maki; Sakasai, Kaoru; Ara, Katuyuki; Suzuki, Yasuo; Fujita, Takaaki
1996-01-01
New methods to reconstruct plasma shape and plasma current distribution from magnetic measurements are proposed. The reconstruction of plasma current profile from magnetic measurements is regarded as an optimum allocation problem of currents into cross section of the vacuum vessel of the tokamak. For solving this optimization problem, the authors use two types of solutions: a genetic algorithm and a combined method of a Hopfield neural network and a genetic algorithm. The effectiveness of these methods is shown by the application of these techniques to JT-60U plasmas
Poloidal rotation induced by injecting lower hybrid waves in tokamak plasma edge
International Nuclear Information System (INIS)
Jiao Yiming; Gao Qingdi; Shi Bingren
2001-01-01
The poloidal rotation of the magnetized edge plasma in tokamak driven by the ponderomotive force which is generated by injecting lower hybrid wave (LHW) electric field has been studied. The LHW is launched from a waveguide in the plasma edge, and by Brambilla's grill theory, analytic expressions for the wave electric field in the slab model of an inhomogeneous cold plasma have been derived. It is shown that a strong wave electric field will be generated in the plasma edge by injecting LH wave of the power in MW magnitude, and this electric field will induce a poloidal rotation with a sheared poloidal velocity
Magnetic field structure near the plasma boundary in helical systems and divertor tokamaks
International Nuclear Information System (INIS)
Nagasaki, Kazunobu; Itoh, Kimitaka
1990-02-01
Magnetic field structure of the scrape off layer (SOL) region in both helical systems and divertor tokamaks is studied numerically by using model fields. The connection length of the field line to the wall is calculated. In helical systems, the connection length, L, has a logarithmic dependence on the distance from the outermost magnetic surface or that from the residual magnetic islands. The effect of axisymmetric fields on the field structure is also determined. In divertor tokamaks, the connection length also has logarithmic properties near the separatrix. Even when the perturbations, which resonate to rational surfaces near the plasma boundary, are added, logarithmic properties still remain. We compare the connection length of torsatron/helical-heliotron systems with that of divertor tokamaks. It is found that the former is shorter than the latter by one order magnitude with similar aspect ratio. (author)
International Nuclear Information System (INIS)
Krug, P.A.
1989-08-01
A numerical simulation has been performed to investigate the precision of a T i -measurement of a tokamak plasma via collective Thomson scattering at 385 μm. The study is based on a parameter and data set referring to an experiment that has been carried out at the TCA tokamak using a pulsed D 2 O laser and a heterodyne receiver system. Apart from limitations due to the signal-to-noise ratio of the detection system, we investigate the influence of uncertainties in various plasma parameters required for the T i -evaluation from a scattered spectrum. In the experiment typical relative errors of ± 25% have been already been obtained, but careful optimization of the system, taking into account the results of this study, and further technical improvements should allow to reduce this limit to about ±10% for the plasma conditions considered. (author) 17 figs., 1 tab., 6 refs
Explaining Cold-Pulse Dynamics in Tokamak Plasmas Using Local Turbulent Transport Models
Rodriguez-Fernandez, P.; White, A. E.; Howard, N. T.; Grierson, B. A.; Staebler, G. M.; Rice, J. E.; Yuan, X.; Cao, N. M.; Creely, A. J.; Greenwald, M. J.; Hubbard, A. E.; Hughes, J. W.; Irby, J. H.; Sciortino, F.
2018-02-01
A long-standing enigma in plasma transport has been resolved by modeling of cold-pulse experiments conducted on the Alcator C-Mod tokamak. Controlled edge cooling of fusion plasmas triggers core electron heating on time scales faster than an energy confinement time, which has long been interpreted as strong evidence of nonlocal transport. This Letter shows that the steady-state profiles, the cold-pulse rise time, and disappearance at higher density as measured in these experiments are successfully captured by a recent local quasilinear turbulent transport model, demonstrating that the existence of nonlocal transport phenomena is not necessary for explaining the behavior and time scales of cold-pulse experiments in tokamak plasmas.
Spectroscopy and atomic physics of highly ionized Cr, Fe, and Ni for tokamak plasmas
Feldman, U.; Doschek, G. A.; Cheng, C.-C.; Bhatia, A. K.
1980-01-01
The paper considers the spectroscopy and atomic physics for some highly ionized Cr, Fe, and Ni ions produced in tokamak plasmas. Forbidden and intersystem wavelengths for Cr and Ni ions are extrapolated and interpolated using the known wavelengths for Fe lines identified in solar-flare plasmas. Tables of transition probabilities for the B I, C I, N I, O I, and F I isoelectronic sequences are presented, and collision strengths and transition probabilities for Cr, Fe, and Ni ions of the Be I sequence are given. Similarities of tokamak and solar spectra are discussed, and it is shown how the atomic data presented may be used to determine ion abundances and electron densities in low-density plasmas.
Different techniques for investigation of plasma diffusion coefficient in IR-T1 Tokamak
Ghoranneviss, Mahmood; Meshkani, Sakineh; Lafouti, Mansoureh
2017-03-01
Diffusion due to the run-away electrons in Tokamak can cause serious damages to the Tokamak walls. In this study, aiming for improving the plasma confinement, the diffusion coefficient was calculated in two different approaches using two different probes. In the first approach; Langmuir probe, was utilized to measure the poloidal electric field, radial flux and consequently the diffusion coefficient. On a more approach, the diffusion coefficient has been estimated by using the ball-pen probe and the Fourier-transform and the assumption of entirely diffusive plasma penetration inside the boron nitride shielding. In order to improve the plasma confinement, external biased voltages of ± 200 V were applied when the plasma experienced its stable phase. Comparing the results, a clear unity can be seen from both the Langmuir approach and the Ball-pen approach. As the results indicate, the diffusion coefficient in Langmuir approach decreased up to 40% when the positive biased voltage of 200 V was applied. However, when the negative biased voltage of 200 V was applied, the diffusion coefficient increased significantly (up to 60%). Ball-pen approach results signify the same results from Langmuir probe. Where, by applying the positive biased voltage of 200 V the diffusion coefficient decreased by almost 40% and on the contrary, the negative biased voltage of 200 V increased the diffusion coefficient up to 30% in general. It can be said that the positive biased voltage contributed to improve the plasma confinement in Tokamak.
Coupled two-dimensional edge plasma and neutral gas modeling of tokamak scrape-off-layers
International Nuclear Information System (INIS)
Maingi, R.
1992-08-01
The objective of this study is to devise a detailed description of the tokamak scrape-off-layer (SOL), which includes the best available models of both the plasma and neutral species and the strong coupling between the two in many SOL regimes. A good estimate of both particle flux and heat flux profiles at the limiter/divertor target plates is desired. Peak heat flux is one of the limiting factors in determining the survival probability of plasma-facing-components at high power levels. Plate particle flux affects the neutral flux to the pump, which determines the particle exhaust rate. A technique which couples a two-dimensional (2-D) plasma and a 2-D neutral transport code has been developed (coupled code technique), but this procedure requires large amounts of computer time. Relevant physics has been added to an existing two-neutral-species model which takes the SOL plasma/neutral coupling into account in a simple manner (molecular physics model), and this model is compared with the coupled code technique mentioned above. The molecular physics model is benchmarked against experimental data from a divertor tokamak (DIII-D), and a similar model (single-species model) is benchmarked against data from a pump-limiter tokamak (Tore Supra). The models are then used to examine two key issues: free-streaming-limits (ion energy conduction and momentum flux) and the effects of the non-orthogonal geometry of magnetic flux surfaces and target plates on edge plasma parameter profiles
Search for coherent structure within tokamak plasma turbulence
International Nuclear Information System (INIS)
Zweben, S.J.
1985-01-01
Two-dimensional tokamak edge density turbulence data are examined for possible coherent or organized structure. The spatial patterns of density fluctuations n appear to consist of localized ''blobs'' of relatively high or low density which can move irregularly both radially and poloidally through the edge region. However, a statistical analysis of the lifetime, area, direction, speed, and amplitude of these blobs does not as yet suggest any organized structure associated with the blobs beyond that which can be described by time-averaged correlation functions
FPGA based Fuzzy Logic Controller for plasma position control in ADITYA Tokamak
Energy Technology Data Exchange (ETDEWEB)
Suratia, Pooja, E-mail: poojasuratia@yahoo.com [Electrical Engineering Department, Faculty of Technology and Engineering, The Maharaja Sayajirao University of Baroda, Kalabhavan, Vadodara 390001, Gujarat (India); Patel, Jigneshkumar, E-mail: jjp@ipr.res.in [Institute for Plasma Research, Bhat, Gandhinagar 382428, Gujarat (India); Rajpal, Rachana, E-mail: rachana@ipr.res.in [Institute for Plasma Research, Bhat, Gandhinagar 382428, Gujarat (India); Kotia, Sorum, E-mail: smkotia-eed@msubaroda.ac.in [Electrical Engineering Department, Faculty of Technology and Engineering, The Maharaja Sayajirao University of Baroda, Kalabhavan, Vadodara 390001, Gujarat (India); Govindarajan, J., E-mail: govindarajan@ipr.res.in [Institute for Plasma Research, Bhat, Gandhinagar 382428, Gujarat (India)
2012-11-15
Highlights: Black-Right-Pointing-Pointer Evaluation and comparison of the working performance of FLC is done with that of PID Controller. Black-Right-Pointing-Pointer FLC is designed using MATLAB Fuzzy Logic Toolbox, and validated on ADITYA RZIP model. Black-Right-Pointing-Pointer FLC was implemented on a FPGA. The close-loop testing is done by interfacing FPGA to MATLAB/Simulink. Black-Right-Pointing-Pointer Developed FLC controller is able to maintain the plasma column within required range of {+-}0.05 m and was found to give robust control against various disturbances and faster and smoother response compared to PID Controller. - Abstract: Tokamaks are the most promising devices for obtaining nuclear fusion energy from high-temperature, ionized gas termed as Plasma. The successful operation of tokamak depends on its ability to confine plasma at the geometric center of vacuum vessel with sufficient stability. The quality of plasma discharge in ADITYA Tokamak is strongly related to the radial position of the plasma column in the vacuum vessel. If the plasma column approaches too near to the wall of vacuum vessel, it leads to minor or complete disruption of plasma. Hence the control of plasma position throughout the entire plasma discharge duration is a fundamental requirement. This paper describes Fuzzy Logic Controller (FLC) which is designed for radial plasma position control. This controller is tested and evaluated on the ADITYA RZIP control model. The performance of this FLC was compared with that of Proportional-Integral-Derivative (PID) Controller and the response was found to be faster and smoother. FLC was implemented on a Field Programmable Gate Array (FPGA) chip with the use of a Very High-Speed Integrated-Circuits Hardware Description-Language (VHDL).
DIII-D Integrated plasma control solutions for ITER and next-generation tokamaks
International Nuclear Information System (INIS)
Humphreys, D.A.; Ferron, J.R.; Hyatt, A.W.; La Haye, R.J.; Leuer, J.A.; Penaflor, B.G.; Walker, M.L.; Welander, A.S.; In, Y.
2008-01-01
Plasma control design approaches and solutions developed at DIII-D to address its control-intensive advanced tokamak (AT) mission are applicable to many problems facing ITER and other next-generation devices. A systematic approach to algorithm design, termed 'integrated plasma control,' enables new tokamak controllers to be applied operationally with minimal machine time required for tuning. Such high confidence plasma control algorithms are designed using relatively simple ('control-level') models validated against experimental response data and are verified in simulation prior to operational use. A key element of DIII-D integrated plasma control, also required in the ITER baseline control approach, is the ability to verify both controller performance and implementation by running simulations that connect directly to the actual plasma control system (PCS) that is used to operate the tokamak itself. The DIII-D PCS comprises a powerful and flexible C-based realtime code and programming infrastructure, as well as an arbitrarily scalable hardware and realtime network architecture. This software infrastructure provides a general platform for implementation and verification of realtime algorithms with arbitrary complexity, limited only by speed of execution requirements. We present a complete suite of tools (known collectively as TokSys) supporting the integrated plasma control design process, along with recent examples of control algorithms designed for the DIII-D PCS. The use of validated physics-based models and a systematic model-based design and verification process enables these control solutions to be directly applied to ITER and other next-generation tokamaks
On lateral deflection of the SOL plasma in tokamaks during giant ELMs
International Nuclear Information System (INIS)
Landman, I.S.; Wuerz, H.
2000-06-01
In recent H-mode experiments at JET with giant ELMs a lateral deflection of hot tokamak plasma leaving the scrape-off layer and striking the divertor plate has been observed. This deflection can effect the divertor erosion caused by the hot plasma irradiation, because of enlarging the irradiated area. A simplified MHD model of the vapor shield plasma and of the hot plasma initially formed at time t → -∞ is analyzed. At t = -∞ both plasmas are assumed to stay on rest and to be separated by a boundary, which is parallel to the plate surface. The interaction between plasmas is assumed to develop gradually ('adiabatically') as exp(t/t 0 ) with t 0 ∝ 10 2 μs the ELM duration time. Electrical insulation of the core tokamak plasma is assumed everywhere except for the contact with the divertor. Electric currents are flowing only in the toroidal direction. These currents developing in the interaction zone of the hot plasma and the rather cold target plasma are calculated for inclined impact of the magnetized hot plasma. At such conditions the J x B force in the lateral direction accelerates the interacting plasmas. The motion of the cold plasma and the gradual increase of the plasma interaction intensity are shown to be important for the appropriate deflection magnitude. Adiabatically responding against the increase of the interaction intensity the cold plasma motion compensates significantly the currents thus decreasing the deflection compared to motionless approach. The calculated magnitude of the hot plasma deflection is comparable to the observed one. The results of the modeling are discussed in relation to the experiments. It is shown that sudden switching on of the interaction produces Alfven oscillations of large amplitudes causing much larger amplitudes of the magnetic field induced by the currents than in the adiabatic case. (orig.)
Real-time software for the COMPASS tokamak plasma control
Energy Technology Data Exchange (ETDEWEB)
Valcarcel, D.F., E-mail: danielv@ipfn.ist.utl.p [Associacao EURATOM/IST, Instituto de Plasmas e Fusao Nuclear - Laboratorio Associado, Instituto Superior Tecnico, P-1049-001 Lisboa (Portugal); Duarte, A.S.; Neto, A.; Carvalho, I.S.; Carvalho, B.B.; Fernandes, H.; Sousa, J. [Associacao EURATOM/IST, Instituto de Plasmas e Fusao Nuclear - Laboratorio Associado, Instituto Superior Tecnico, P-1049-001 Lisboa (Portugal); Sartori, F. [Euratom-UKAEA, Culham Science Centre, Abingdon, OX14 3DB Oxon (United Kingdom); Janky, F.; Cahyna, P.; Hron, M.; Panek, R. [Institute of Plasma Physics AS CR, v.v.i., Association EURATOM/IPP.CR, Za Slovankou 3, 182 00 Prague (Czech Republic)
2010-07-15
The COMPASS tokamak has started its operation recently in Prague and to meet the necessary operation parameters its real-time system, for data processing and control, must be designed for both flexibility and performance, allowing the easy integration of code from several developers and to guarantee the desired time cycle. For this purpose an Advanced Telecommunications Computing Architecture based real-time system has been deployed with a solution built on a multi-core x86 processor. It makes use of two software components: the BaseLib2 and the MARTe (Multithreaded Application Real-Time executor) real-time frameworks. The BaseLib2 framework is a generic real-time library with optimized objects for the implementation of real-time algorithms. This allowed to build a library of modules that process the acquired data and execute control algorithms. MARTe executes these modules in kernel space Real-Time Application Interface allowing to attain the required cycle time and a jitter of less than 1.5 {mu}s. MARTe configuration and data storage are accomplished through a Java hardware client that connects to the FireSignal control and data acquisition software. This article details the implementation of the real-time system for the COMPASS tokamak, in particular the organization of the control code, the design and implementation of the communications with the actuators and how MARTe integrates with the FireSignal software.
Mitchell, N
2001-01-01
In recent proposals for next generation superconducting tokamaks, such as the ITER project, the nuclear burning plasma is confined by magnetic fields generated from a large set (up to 100 GJ stored energy) of superconducting magnets. These magnets suffer heat loads in operation from thermal and nuclear radiation from the surrounding components and plasma as well as eddy currents and AC losses generated within the magnets, together with the heat conduction through supports and resistive heat generated at the current lead transitions to room temperature. The initial cryoplant for such a tokamak is expected to have a steady state capacity of up to about 85 kW at 4.5 K, comparable to the system installed for LHC at CERN. Experimental tokamaks are expected to operate at least initially in a pulsed mode with 20-30 short plasma pulses and plasma burn periods each day. A conventional cryoplant, consisting of a cold box and a set of primary heat exchangers, is ill-suited to such a mode of operation as the instantaneou...
Impact of lithium pellets on plasma performance in the ASDEX Upgrade all-metal-wall tokamak
Lang, P. T.; Maingi, R.; Mansfield, D. K.; McDermott, R. M.; Neu, R.; Wolfrum, E.; Arredondo Parra, R.; Bernert, M.; Birkenmeier, G.; Diallo, A.; Dunne, M.; Fable, E.; Fischer, R.; Geiger, B.; Hakola, A.; Nikolaeva, V.; Kappatou, A.; Laggner, F.; Oberkofler, M.; Ploeckl, B.; Potzel, S.; Pütterich, T.; Sieglin, B.; Szepesi, T.; ASDEX Upgrade Team
2017-01-01
The impact of lithium (Li) on plasma performance was investigated at the ASDEX Upgrade tokamak, which features a full tungsten wall. Li pellets containing 1.6 × 1020 Li atoms were launched with a speed of 600 m s-1 to achieve deep penetration into the plasma and minimize the impact on the first wall. Homogeneous transient Li concentrations in the plasma of up to 15% were established. The Li sustainment time in the plasma decreased with an increasing heating power from 150 to 40 ms. Due to the pellet rate being restricted to 2 Hz, no Li pile-up could take place. No significant positive impact on plasma properties, as reported from other tokamak devices, could be found; the Li pellets rather caused a small reduction in plasma energy, mainly due to enhanced radiation. Due to pellet injection, a short-lived Li layer was formed on the plasma-facing components, which lasted a few discharges and led to moderately beneficial effects during plasma start-up. Most pellets were found to trigger type-I ELMs, either by their direct local perturbation or indirectly by the altered edge conditions; however, reliability was less than 100%.
Resistive internal kink modes in a tokamak with high-pressure plasma
International Nuclear Information System (INIS)
Kuvshinov, B.N.; Mikhajlovskij, A.B.; Tatarinov, E.G.
1988-01-01
Theory of resistive internal kink modes in a tokamak with high-pressure plasma is developed. Equation for Fourie-image of disturbed displacment in a resistive layer ie derived with regard to effects of the fourth order by plasma pressure within the framework of single-liquid approach. In its structure this equation coincides with a similar equation for resistive balloon modes and has an exact solution expressed by degenerated hypergeometric function. A general dispersion equation for resistive kink modes is derived with regard to the effects indicated. It is shown that plasma pressure finiteness leads to the reduction of reconnection and tyring-mode increments
On thermionic emission from plasma-facing components in tokamak-relevant conditions.
Czech Academy of Sciences Publication Activity Database
Komm, Michael; Ratynskaia, S.; Tolias, P.; Cavalier, Jordan; Dejarnac, Renaud; Gunn, J. P.; Podolník, Aleš
2017-01-01
Roč. 59, č. 9 (2017), č. článku 094002. ISSN 0741-3335 R&D Projects: GA ČR(CZ) GA16-14228S; GA MŠk(CZ) 8D15001 EU Projects: European Commission(XE) 633053 - EUROfusion Institutional support: RVO:61389021 Keywords : thermionic * PIC * tungsten * tokamak * thermionic emission * plasma facing components * particle-in-cell Subject RIV: BL - Plasma and Gas Discharge Physics OBOR OECD: Fluids and plasma physics (including surface physics) Impact factor: 2.392, year: 2016 http://iopscience.iop.org/article/10.1088/1361-6587/aa78c4/pdf
Study on the bywalled plasma near the FT-2 tokamak limiter
International Nuclear Information System (INIS)
Budnikov, V.N.; Gerasimenko, G.V.; Esipov, L.A.; Levitskij, A.N.; Sakharov, I.E.; Shatalin, S.V.
1987-01-01
Results od investigation into the bywalled plasma near the FT-2 tokamak limiter, conducted using the ternary probe method are presented. Plasma charged particle concentration radial profiles, results of measuring the electron temperature and azimuthal electric field are presented. It is shown, that at l > 2mm, where l is the distance up to the limiter, concentration practically does not depend on the longitudinal coordinate and near the limiter (l < 20 mm) a sharp drop of plasma charged particle concentration measured values (∼ 2-fold) is observed. Neoclassical mechanism of filling the depletion area (the probe shade) is confirmed
On the physics of the pressure and temperature gradients in the edge of tokamak plasmas
Stacey, Weston M.
2018-04-01
An extended plasma fluid theory including atomic physics, radiation, electromagnetic and themodynamic forces, external sources of particles, momentum and energy, and kinetic ion orbit loss is employed to derive theoretical expressions that display the role of the various factors involved in the determination of the pressure and temperature gradients in the edge of tokamak plasmas. Calculations for current experiments are presented to illustrate the magnitudes of various effects including strong radiative and atomic physics edge cooling effects and strong reduction in ion particle and energy fluxes due to ion orbit loss in the plasma edge. An important new insight is the strong relation between rotation and the edge pressure gradient.
Impurity injection into tokamak plasmas by erosion probes
International Nuclear Information System (INIS)
Hildebrandt, D.; Bakos, J.S.; Buerger, G.; Paszti, F.; Petravich, G.
1987-08-01
Exposing special erosion probes into the edge plasma of MT-1 the impurities Li and Ti were released and contaminated the plasma. By the use of collector probes the torodial transport of these impurities were investigated. The results indicate a preferential impurity flow into codirection of the plasma current. However, the asymmetric component of this flow is much larger than expected from the toroidal drift correlated to the plasma current. (author)
Characteristics of disruptive plasma current decay in the HT-2 tokamak
International Nuclear Information System (INIS)
Abe, Mitsushi; Takeuchi, Kazuhiro; Otsuka, Michio
1993-01-01
Motions of plasma current channel and time evolutions of eddy current distribution on the vacuum vessel during disruptive plasma current decay were studied experimentally in the Hitachi tokamak HT-2. The plasmas are vertically elongated and circularly shaped plasmas. A disruptive plasma current decay has three phases. During the first phase, a large displacement of the plasma position without plasma current decay is observed. Rapid plasma current decay is observed during the second phase and the decay rate is roughly constant with time. The eddy current distribution is like that due to the shell effect which creates a poloidal field to reduce the plasma displacement. During the third phase, the plasma current decays exponentially. The second phase is observed in slightly elongated and high plasma current (> 20 kA) circularly shaped plasmas. The plasma current decay rates in the second phase depend on the plasma cross sectional shape, but they do not in the third phase. The magnetic axis moves from the plasma area to the vacuum vessel wall between the second and third phases. (author)
Resistive MHD studies of high-β-tokamak plasmas
International Nuclear Information System (INIS)
Lynch, V.E.; Carreras, B.A.; Hicks, H.R.; Holmes, J.A.; Garcia, L.
1981-01-01
Numerical calculations have been performed to study the MHD activity in high-β tokamaks such as ISX-B. These initial value calculations built on earlier low β techniques, but the β effects create several new numerical issues. These issues are discussed and resolved. In addition to time-stepping modules, our system of computer codes includes equilibrium solvers (used to provide an initial condition) and output modules, such as a magnetic field line follower and an X-ray diagnostic code. The transition from current driven modes at low β to predominantly pressure driven modes at high β is described. The nonlinear studies yield X-ray emissivity plots which are compared with experiment
Numerical studies of plasma rotation in the HL-1M tokamak
International Nuclear Information System (INIS)
Peng Lilin; Yan Longwen; Zhang Jinhua; Hong Wenyu
1999-05-01
In order to study and verify the mechanism of tokamak plasma rotation, representative standard neoclassical and its extended theory models of plasma rotation are chosen for programming ROTATE CODE. The new formula of parabola with two indexes is adopted for fitting and smoothing closely the curves of experiment data. The toroidal and poloidal rotation velocities of main ions and impurity ions are studied numerically under conventional operation parameter in the HL-1M tokamak. Computational results visually predict the radial profiles of rotation velocities and reasonably consistent with experimental results measured by Mach probe in the edge region. These provide theory basis for designing accuracy of optical spectrometer and are useful for laying out experiment scheme and analyzing experiment data
Bifurcation of radial electric field in tokamak edge plasmas due to ion orbit loss
International Nuclear Information System (INIS)
Wu, G.J.; Zhang, X.D.
2015-01-01
The ion orbit loss and the formation of radial electric field Er in tokamak edge region are calculated. The ion orbit loss generates a negative Er, which in turn affects the ion loss. As a result, Er can saturates at either a low or a high value, depending on the plasma parameters. When the ion temperature in the plasma edge is higher than a threshold a self-sustaining growth in both the ion loss and Er is found, leading to a high saturation value of Er in the milliseconds time. This mechanism provides a possible explanation for the formation of the edge radial electric field during the L to H-mode transition observed in tokamak experiments. (author)
Heavy ion beam probe development for the plasma potential measurement on the TUMAN-3M tokamak
International Nuclear Information System (INIS)
Askinazi, L.G.; Kornev, V.A.; Lebedev, S.V.; Tukachinsky, A.S.; Zhubr, N.A.; Dreval, N.B.; Krupnik, L.I.
2004-01-01
The peculiarities of the heavy ion beam probe implementation on the small aspect ratio tokamak TUMAN-3M are analyzed. The toroidal displacement of beam trajectory due to the high I pl /B tor ratio is taken into account when designing the layout of the diagnostic. Numerical calculation of beam trajectories using realistic configuration of TUMAN-3M magnetic fields and parabolic plasma current profile resulted in proper adjustment of probing and detection parameters (probing ion material, energy, entrance angles, detector location, and orientation). Secondary ion energy analyzer gain functions G and F were measured in situ using neutral hydrogen puffed in the tokamak vessel as a target for secondary ions production. The detector unit featured split-plate design and had additional electrodes for secondary electron emission suppression. As a result, the diagnostic is now capable of plasma potential evolution measurement and is sensitive enough to trace the potential profile evolution at the L-H mode transition
DEFF Research Database (Denmark)
Meyer, H.; Eich, T.; Beurskens, M.
2017-01-01
Integrating the plasma core performance with an edge and scrape-off layer (SOL) that leads to tolerable heat and particle loads on the wall is a major challenge. The new European medium size tokamak task force (EU-MST) coordinates research on ASDEX Upgrade (AUG), MAST and TCV. This multi-machine ......Integrating the plasma core performance with an edge and scrape-off layer (SOL) that leads to tolerable heat and particle loads on the wall is a major challenge. The new European medium size tokamak task force (EU-MST) coordinates research on ASDEX Upgrade (AUG), MAST and TCV. This multi...... and particle loads, including active edge localised mode (ELM) control are developed. On the other hand, divertor solutions including advanced magnetic configurations are studied. Considerable progress has been made on both approaches, in particular in the fields of: ELM control with resonant magnetic...
Impact of melt-layer ejection from metallic first wall on tokamak plasmas
Smirnov, R. D.; Krasheninnikov, S. I.; Pigarov, A. Yu.; Rognlien, T. D.
2012-10-01
At present, all-metallic tokamak first wall is preferred over carbon composite materials for next generation fusion devices, such as ITER, due to favorable thermo-physical and chemical properties of metals in fusion plasma environment. However, recent experiments demonstrate that surface of metallic components, including tungsten ones, under high transient heat load pertinent to next step tokamaks can melt and eject molten material into fusion plasma in form of droplets or fine spray [1]. The ejected material can be a source of impurity contamination of fusion plasmas and even in some cases cause discharge termination, as was observed recently on LHD. In this work, we investigate impact of ejection of beryllium droplets of various sizes on ITER-like plasmas using coupled dust-plasma edge transport code DUSTT/UEDGE [2]. Different ejection scenarios are modeled, including intermittent and prolonged ejection of molten material at the top, midplane and divertor poloidal locations in ITER. Using the modeling we assess modifications of the plasma profiles, radiation power losses, and impurity particle fluxes to the plasma core produced by various quantities of the ejectile. Critical amounts of the different materials ejected, which can lead to discharge termination, are evaluated.[4pt] [1] J.W. Coenen, et al., Nucl. Fusion 51 (2011) 113020;[0pt] [2] R.D. Smirnov, et al., J. Nucl. Mater. 415 (2011) S1067.
Suppression of high-energy electrons generated in both disrupting and sustained MST tokamak plasmas
Pandya, M. D.; Chapman, B. E.; Munaretto, S.; Cornille, B. S.; McCollam, K. J.; Sovinec, C. R.; Dubois, A. M.; Almagri, A. F.; Goetz, J. A.
2017-10-01
High-energy electrons appearing during MST tokamak plasma disruptions are rapidly lost from the plasma due apparently to internal MHD activity. Work has just recently begun on generating and diagnosing disruptions in MST tokamak plasmas. Initial measurements show the characteristic drop in central temperature and density preceding a quench of the plasma current. This corresponds to a burst of dominantly n=1 MHD activity, which is accompanied by a short-lived burst of high-energy electrons. The short-lived nature of these electrons is suspected to be due to stochastic transport associated with the increased MHD. Earlier work shows that runaway electrons generated in low density, sustained plasmas are suppressed by a sufficiently large m=3 RMP in plasmas with q(a) wound around the vertical insulated gap in MST's thick conducting shell. With an m=3 RMP, the degree of runaway suppression increases with RMP amplitude, while an m=1 RMP has little effect on the runaways. Nonlinear MHD modeling with NIMROD of these MST plasmas indicates increased stochasticity with an m=3 RMP, while no such increase in stochasticity is observed with an m=1 RMP. Work supported by US DOE.
General analysis of magnetic loop positioning for plasma control in ignition tokamaks
International Nuclear Information System (INIS)
Khayrutdinov, R.R.; Azizov, E.A.; Carrera, R.; Montalvo, E.; Dong, J.Q.
1991-01-01
The control of the plasma vertical position in tokamak configurations and the positioning of magnetic, pick-up loops are considered. A 1 1/2 D transport and free-boundary equilibrium (DINA) is utilized. The equilibrium problem for a plasma with free-boundary is solved using the inverse-variable technique. Circuit equations for eddy currents in the vacuum vessel, eddy currents in structures, and currents in active coils coupled with the plasma equilibrium and transport equations are solved. The numerical algorithms employed in the solution permit a reduction in computer time of about two orders of magnitude over conventional calculations of coupled equilibrium and transport. The influence of the location of pick-up coils on control of the plasma vertical position is examined. It is shown that there are geometrical arrangements of the magnetic loops such that the plasma vertical position can not be controlled using a conventional control law (this is regardless of the resistivity of the passive conductors and the gain value in the control system). An explanation of this phenomenon is given. A new and simple control law is proposed such that plasma control is possible with general positioning of the magnetic loops. The conclusions should be important for the operation of ignition tokamaks, where elongated, high-current plasmas have to be stabilized with magnetic loop positioning subject to severe constraints. 1 ref
Soft x-ray imaging system for measurement of noncircular tokamak plasmas
International Nuclear Information System (INIS)
Fonck, R.J.; Reusch, M.; Jaehnig, K.P.; Hulse, R.; Roney, P.
1986-08-01
A soft x-ray camera and image processing system has been constructed to provide measurements of the internal shape of high temperature tokamak plasmas. The camera consists of a metallic-foil-filtered pinhole aperture and a microchannel plate image intensifier/convertor which produces a visible image for detection by a CCD TV camera. A wide-angle tangential view of the toroidal plasma allows a single compact camera to view the entire plasma cross section. With Be filters 12 to 50 μm thick, the signal from the microchannel plate is produced mostly by nickel L-line emissions which orignate in the hot plasma core. The measured toroidal image is numerically inverted to produce a cross-sectional soft x-ray image of the plasma. Since the internal magnetic flux surfaces are usually isothermal and the nickel emissivity depends strongly on the local electron temperature, the x-ray emission contours reflect the shape of the magnetic surfaces in the plasma interior. Initial results from the PBX tokamak experiment show clear differences in internal plasma shapes for circular and bean-shaped discharges
Effect of plasma density profile of tokamak on Kelvin-Helmholtz instability
International Nuclear Information System (INIS)
Tang Fulin
1984-01-01
The purpose of this paper is to study the effect of radial distribution of plasma density profile of tokamak on Kelvin-Helmholtz instability caused by toroidal rotation. The effect of radial distribution of plasma rotational velocity on stability is also examine for comparison. It is found that within the range of tokamak parameters the only radial distribution of plasma rotational velocity cannot induce Kelvin-Helmholtz instability. On the contrary, when there is a radial distribution of plasma density, i.e. P 01 =P 0 e -tx and V 0 1 = const, plasma becomes unstable, and instability will increase proportionally to the value of t. Meanwhile when the value of t remains constant, the instability growth rate will decrease if P 0 grows or the distance between plasma and wall of container decreases too. It shows that the Kelvin-Helmoltz instability is not only influenced by the steepness of density profile but also by the inertia of plasma in central region, which is helpful for depressing the instability. (author). 5 refs, 4 figs, 2 tabs
International Nuclear Information System (INIS)
Ane, J.M.; Grandgirard, V.; Albajar, F.; Johner, J.
2001-01-01
A consistent and simple approach to derive plasma scenarios for next step tokamak design is presented. It is based on successive plasma equilibria snapshots from plasma breakdown to end of ramp-down. Temperature and density profiles for each equilibrium are derived from a 2D plasma model. The time interval between two successive equilibria is then computed from the toroidal field magnetic energy balance, the resistive term of which depends on n, T profiles. This approach provides a consistent analysis of plasma performance, flux consumption and PF system, including average voltages waveforms across the PF coils. The plasma model and the Poynting theorem for the toroidal magnetic energy are presented. Application to ITER-FEAT and to M2, a Q=5 machine designed at CEA, are shown. (author)
Space-resolved vacuum ultra-violet spectroscopy on T.F.R. Tokamak plasmas
International Nuclear Information System (INIS)
1978-01-01
Results are reported of space-resolved vacuum-ultraviolet spectroscopy (between 100 A and 2000A) on T.F.R. Tokamak plasmas and examples are given of profiles for both heavy and light impurity ions. The experimental method and the associated uncertainties and problems are stressed. The great importance of numerical calculations in the interpretation of the impurity profiles is pointed out. (author)
3D MHD simulations of pellet injection and disruptions in tokamak plasmas
International Nuclear Information System (INIS)
Strauss, H.R.; Park, W.; Belova, E.; Fu, G.Y.; Sugiyama, L.E.
1999-01-01
Nonlinear MHD simulation results of pellet injection show that MHD forces can accelerate large pellets, injected on the high field side of a tokamak, to the plasma center. Magnetic reconnection can produce a reverse shear q profile. Ballooning instability caused by pellets is also reduced by high field side injection. Studies are also reported of the current quench phase of disruptions, which can cause 3D halo currents and runaway electrons. (author)
3D MHD simulations of pellet injection and disruptions in tokamak plasmas
International Nuclear Information System (INIS)
Strauss, H.R.; Park, W.; Belova, E.; Fu, G.Y.; Sugiyama, L.E.
2001-01-01
Nonlinear MHD simulation results of pellet injection show that MHD forces can accelerate large pellets, injected on the high field side of a tokamak, to the plasma center. Magnetic reconnection can produce a reverse shear q profile. Ballooning instability caused by pellets is also reduced by high field side injection. Studies are also reported of the current quench phase of disruptions, which can cause 3D halo currents and runaway electrons. (author)
Czech Academy of Sciences Publication Activity Database
Adámek, Jiří; Stöckel, Jan; Hron, Martin; Ďuran, Ivan; Pánek, Radomír; Tichý, M.; Schrittwieser, R.; Ionita, C.; Balan, P.; Martines, E.; Van Oost, G.
2005-01-01
Roč. 55, č. 3 (2005), s. 235-242 ISSN 0011-4626 R&D Projects: GA ČR GA202/03/0786 Institutional research plan: CEZ:AV0Z20430508 Keywords : tokamak * edge plasma * plasma potential * Langmuir probe Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 0.360, year: 2005
International Nuclear Information System (INIS)
Yoshida, Zensho; Yamada, Hiroshi.
1988-07-01
The Bohm equation of electrostatic potential distributions in one-dimensional plasmas has been studied for various Mach numbers and plasma potentials. Solvability and structural stability have been discussed using the Sagdeev potential. Implications of the structural stability for the L/H transitions in tokamak plasmas has been also discussed. (author)
Energy Technology Data Exchange (ETDEWEB)
Federici, G.; Skinner, C.H.; Brooks, J.N.; Coad, J.P.; Grisolia, C. [and others
2001-01-10
The major increase in discharge duration and plasma energy in a next-step DT [deuterium-tritium] fusion reactor will give rise to important plasma-material effects that will critically influence its operation, safety, and performance. Erosion will increase to a scale of several centimeters from being barely measurable at a micron scale in today's tokamaks. Tritium co-deposited with carbon will strongly affect the operation of machines with carbon plasma-facing components. Controlling plasma wall interactions is critical to achieving high performance in present-day tokamaks and this is likely to continue to be the case in the approach to practical fusion reactors. Recognition of the important consequences of these phenomena has stimulated an internationally coordinated effort in the field of plasma-surface interactions supporting the Engineering Design Activities of the International Thermonuclear Experimental Reactor (ITER) project and significant progress has been made in better under standing these issues. This paper reviews the underlying physical processes and the existing experimental database of plasma-material interactions both in tokamaks and laboratory simulation facilities for conditions of direct relevance to next-step fusion reactors. Two main topical groups of interactions are considered: (i) erosion/redeposition from plasma sputtering and disruptions, including dust and flake generation, (ii) tritium retention and removal. The use of modeling tools to interpret the experimental results and make projections for conditions expected in future devices is explained. Outstanding technical issues and specific recommendations on potential R and D [Research and Development] avenues for their resolution are presented.
International Nuclear Information System (INIS)
Federici, G.; Skinner, C.H.; Brooks, J.N.; Coad, J.P.; Grisolia, C.
2001-01-01
The major increase in discharge duration and plasma energy in a next-step DT (deuterium-tritium) fusion reactor will give rise to important plasma-material effects that will critically influence its operation, safety, and performance. Erosion will increase to a scale of several centimeters from being barely measurable at a micron scale in today's tokamaks. Tritium co-deposited with carbon will strongly affect the operation of machines with carbon plasma-facing components. Controlling plasma wall interactions is critical to achieving high performance in present-day tokamaks and this is likely to continue to be the case in the approach to practical fusion reactors. Recognition of the important consequences of these phenomena has stimulated an internationally coordinated effort in the field of plasma-surface interactions supporting the Engineering Design Activities of the International Thermonuclear Experimental Reactor (ITER) project and significant progress has been made in better under standing these issues. This paper reviews the underlying physical processes and the existing experimental database of plasma-material interactions both in tokamaks and laboratory simulation facilities for conditions of direct relevance to next-step fusion reactors. Two main topical groups of interactions are considered: (i) erosion/redeposition from plasma sputtering and disruptions, including dust and flake generation, (ii) tritium retention and removal. The use of modeling tools to interpret the experimental results and make projections for conditions expected in future devices is explained. Outstanding technical issues and specific recommendations on potential R and D (Research and Development) avenues for their resolution are presented
Parametric analysis of the thermal effects on the divertor in tokamaks during plasma disruptions
Energy Technology Data Exchange (ETDEWEB)
Bruhn, M.L.
1988-04-01
Plasma disruptions are an ever present danger to the plasma-facing components in today's tokamak fusion reactors. This threat results from our lack of understanding and limited ability to control this complex phenomenon. In particular, severe energy deposition occurs on the divertor component of the double-null configured tokamak reactor during such disruptions. A hybrid computational model developed to estimate and graphically illustrate global thermal effects of disruptions on the divertor plates is described in detail. The quasi-two-dimensional computer code, TADDPAK (Thermal Analysis Divertor during Disruptions PAcKage), is used to conduct parametric analysis for the TIBER II Tokamak Engineering Test Reactor Design. The dependence of these thermal effects on divertor material choice, disruption pulse length, disruption pulse shape, and the characteristic thickness of the plasma scrape-off layer is investigated for this reactor design. Results and conclusions from this analysis are presented. Improvements to this model and issues that require further investigation are discussed. Cursory analysis for ITER (International Thermonuclear Experimental Reactor) is also presented in the appendix. 75 refs., 49 figs., 10 tabs.
International Nuclear Information System (INIS)
Malik, M.A.
1988-01-01
There is a self-consistent theory of the effects of neutral beam injection on impurity transport in tokamak plasmas. The theory predicts that co-injection drives impurities outward and that counter-injection enhances the normally inward flow of impurities. The theory was applied to carry out a detailed analysis of the large experimental database from the PLT and the ISX-B tokamaks. The theory was found to generally model the experimental data quite well. It is, therefore, concluded that neutral beam co-injection can drive impurities outward to achieve clean central plasmas and a cool radiating edge. Theoretical predictions for future thermonuclear reactors such as INTOR, TIBER II, and ITER indicated that neutral beam driven flow reversal might be an effective impurity control method if the rate of beam momentum deposited per plasma ion is adequate. The external momentum drag, which is a pivotal concept in impurity flow reversal theory, is correctly predicted by the gyroviscous theory of momentum confinement. The theory was applied to analyze experimental data from the PLT and the PDX tokamaks with exact experimental conditions. The theory was found to be in excellent agreement with experiment over a wide range of parameters. It is, therefore, possible to formulate the impurity transport theory from first principles, without resort to empiricism
Time-dependent free boundary equilibrium and resistive diffusion in a tokamak plasma
International Nuclear Information System (INIS)
Selig, G.
2012-12-01
In a Tokamak, in order to create the necessary conditions for nuclear fusion to occur, a plasma is maintained by applying magnetic fields. Under the hypothesis of an axial symmetry of the tokamak, the study of the magnetic configuration at equilibrium is done in two dimensions, and is deduced from the poloidal flux function. This function is solution of a non linear partial differential equation system, known as equilibrium problem. This thesis presents the time dependent free boundary equilibrium problem, where the circuit equations in the tokamak coils and passive conductors are solved together with the Grad-Shafranov equation to produce a dynamic simulation of the plasma. In this framework, the Finite Element equilibrium code CEDRES has been improved in order to solve the aforementioned dynamic problem. Consistency tests and comparisons with the DINA-CH code on an ITER vertical instability case have validated the results. Then, the resistive diffusion of the plasma current density has been simulated using a coupling between CEDRES and the averaged one-dimensional diffusion equation, and it has been successfully compared with the integrated modeling code CRONOS. (author)
Calculations of axisymmetric stability of tokamak plasmas with active and passive feedback
Energy Technology Data Exchange (ETDEWEB)
Ward, D.J.; Jardin, S.C.; Cheng, C.Z.
1991-07-01
A new linear MHD stability code, NOVA-W, has been developed in order to study feedback stabilization of the axisymmetric mode in deformable tokamak plasmas. The NOVA-W code is a modification of the non-variational MHD stability code NOVA that includes the effects of resistive passive conductors and active feedback circuits. The vacuum calculation has been reformulated in terms of the perturbed poloidal flux to allow the inclusion of perturbed toroidal currents outside the plasma. The boundary condition at the plasma-vacuum interface relates the instability displacement to the perturbed poloidal flux. This allows a solution of the linear MHD stability equations with the feedback effects included. The passive stability predictions of the code have been tested both against a simplified analytic model and against a different numerical calculation for a realistic tokamak configuration. The comparisons demonstrate the accuracy of the NOVA-W results. Active feedback calculations are performed for the CIT tokamak design demonstrating the effect of varying the position of the flux loops that provide the measurements of vertical displacement. The results compare well with those computed earlier using a less efficient nonlinear code. 37 refs., 13 figs.
Thermal-hydraulic and thermo-mechanical design of plasma facing components for SST-1 tokamak
International Nuclear Information System (INIS)
Chaudhuri, Paritosh; Santra, P.; Chenna Reddy, D.; Parashar, S.K.S.
2014-01-01
The Plasma Facing Components (PFCs) are one of the major sub-systems of ssT-1 tokamak. PFC of ssT-1 consisting of divertors, passive stabilizers, baffles and limiters are designed to be compatible for steady state operation. The main consideration in the design of the PFC cooling is the steady state heat removal of up to 1 MW/m 2 . The PFC has been designed to withstand the peak heat fluxes and also without significant erosion such that frequent replacement of the armor is not necessary. Design considerations included 2-D steady state and transient tile temperature distribution and resulting thermal loads in PFC during baking, and cooling, coolant parameters necessary to maintain optimum thermal-hydraulic design, and tile fitting mechanism. Finite Element (FE) models using ANSYS have been developed to carry out the heat transfer and stress analyses of the PFC to understand its thermal and mechanical behaviors. The results of the calculation led to a good understanding of the coolant flow behavior and the temperature distribution in the tube wall and the different parts of the PFC. Thermal analysis of the PFC is carried out with the purpose of evaluating the thermal mechanical behavior of PFCs. The detailed thermal-hydraulic and thermo-mechanical designs of PFCs of ssT-1 are discussed in this paper. (authors)
International Nuclear Information System (INIS)
Marinoni, A.
2009-10-01
One of the most important issues for magnetic-confinement fusion research is the so-called anomalous transport across magnetic field lines, i.e. transport that is in excess of that caused by collisional processes. The need to reduce anomalous transport in order to increase the efficiency of a prospective fusion reactor must be addressed through an investigation of its fundamental underlying causes. This thesis is divided into two distinct components: one experimental and instrumental, and the other theoretical and based on numerical modeling. The experimental part consists of the design and installation of a new diagnostic for core turbulence fluctuations in the TCV tokamak. An extensive conceptual investigation of a number of possible solutions, including Beam Emission Spectroscopy, Reflectometry, Cross Polarization, Collective Scattering and different Imaging techniques, was carried out at first. A number of criteria, such as difficulties in data interpretation, costs, variety of physics issues that could be addressed and expected performance, were used to compare the different techniques for specific application to the TCV tokamak. The expected signal to noise ratio and the required sampling frequency for TCV were estimated on the basis of a large number of linear, local gyrokinetic simulations of plasma fluctuations. This work led to the choice of a Zernike phase contrast imaging system in a tangential launching configuration. The diagnostic was specifically designed to provide information on turbulence features up to now unknown. In particular, it is characterized by an outstanding spatial resolution and by the capability to measure a very broad range of fluctuations, from ion to electron Larmor radius scales, thus covering the major part of the instabilities expected to be at play in TCV. The spectrum accessible covers the wavenumber region from 0.9 cm -1 to 60 cm -1 at 24 radial positions with 3 MHz bandwidth. The diagnostic is an imaging technique and is
Conceptual design of plasma position control of SST-1 tokamak using vertical field coil
International Nuclear Information System (INIS)
Gulati, Hitesh Kumar; Patel, Kiritkumar B.; Dhongde, Jasraj
2015-01-01
SST-1 (Steady State Superconducting Tokamak) is a plasma confinement device in Institute for Plasma Research (IPR) India. SST-1 has been commissioned successfully and has been carrying out plasma experiments since the beginning of 2014 achieved a maximum plasma current of 75 kA at a central field of 1.5 T and the plasma duration ∼ 500 ms. SST-1 looks forward to carrying out elongated plasma experiments and stretching plasma pulses beyond 1s. Based on the solution of Grad-Shafranov equation the shift of plasma column center from geometrical centre of vacuum chamber is measured using various magnetic probes and flux loops installed in the machine. The closed feedback loop uses plasma current (Ip), Delta R as feedback signal and manipulate the vertical field current (Ivf). The discharge starts with feed forward loop using initially provided reference then the active feedback starts after discharge by few msec once plasma column is completely formed. The feedback loop time is of the order of 10 msec. The primary objective is to acquire plasma position control related signals, compute plasma position and generate position correction signal for VF coil power supply, communicate correction to VF coil power supply and modify VF power supply output in a deterministic time span. In this we present the methodology used for plasma horizontal displacement control using vertical field and discuss the preliminary results. (author)
International Nuclear Information System (INIS)
Peng, Y.K.M.
1978-04-01
A tokamak configuration is proposed that permits the rapid replacement of a plasma discharge in a ''burn'' chamber by another one in a time scale much shorter than the elementary thermal time constant of the chamber first wall. With respect to the chamber, the effective duty cycle factor can thus be made arbitrarily close to unity minimizing the cyclic thermal stress in the first wall. At least one plasma discharge always exists in the new tokamak configuration, hence, a continuous tokamak. By incorporating adiabatic toroidal compression, configurations of continuous tokamak compressors are introduced. To operate continuous tokamaks, it is necessary to introduce the concept of mixed poloidal field coils, which spatially groups all the poloidal field coils into three sets, all contributing simultaneously to inducing the plasma current and maintaining the proper plasma shape and position. Preliminary numerical calculations of axisymmetric MHD equilibria in continuous tokamaks indicate the feasibility of their continued plasma operation. Advanced concepts of continuous tokamaks to reduce the topological complexity and to allow the burn plasma aspect ratio to decrease for increased beta are then suggested
Real-time control of Tokamak plasmas: from control of physics to physics-based control
International Nuclear Information System (INIS)
Felici, F. A. A.
2011-11-01
Stable, high-performance operation of a tokamak requires several plasma control problems to be handled simultaneously. Moreover, the complex physics which governs the tokamak plasma evolution must be studied and understood to make correct choices in controller design. In this thesis, the two subjects have been merged, using control solutions as experimental tool for physics studies, and using physics knowledge for developing new advanced control solutions. The TCV tokamak at CRPP-EPFL is ideally placed to explore issues at the interface between plasma physics and plasma control, by combining a digital realtime control system with a flexible and powerful set of actuators, in particular the electron cyclotron heating and current drive system (ECRH/ECCD). This experimental platform has been used to develop and test new control strategies for three plasma physics instabilities: sawtooth, edge localized mode (ELM) and neoclassical tearing mode (NTM). The period of the sawtooth crash, a periodic MHD instability in the core of a tokamak plasma, can be varied by localized deposition of ECRH/ECCD near the q = 1 surface (q: safety factor). A sawtooth pacing controller was developed which is able to control the time of appearance of the next sawtooth crash. Each individual sawtooth period can be controlled in real-time. A similar scheme is applied to H-mode plasmas with type-I ELMs, where it is shown that pacing regularizes the ELM period. The regular, reproducible and therefore predictable sawtooth crashes have been used to study the relationship between sawteeth and NTMs. Postcrash MHD activity can provide the ‘seed’ island for an NTM, which then grows under its neoclassical bootstrap drive. The seeding of 3/2 NTMs by long sawtooth crashes can be avoided by preemptive, crash-synchronized EC power injection pulses at the q = 3/2 rational surface location. NTM stabilization experiments in which the ECRH deposition location is moved in real-time with steerable mirrors have
Determination of the plasma column shape in the Tokamak Novillo cross section by magnetic probes
International Nuclear Information System (INIS)
Hernandez Omana, A.
1993-01-01
The determination of plasma cross section shape in Tokamaks is an important diagnostic method for equilibrium conditions analysis. In this work, it is obtained a time dependent variation of the plasma column cross section in Novillo Tokamak. The experimental method is based on using one magnetic probe, which is installed inside of the vacuum vessel in a 1 mm. wall thickness stainless steel tube, in the protected region of the limiter shadow. The plasma column cross section is determined measuring the poloidal magnetic field produced by the plasma current. This method, now running for determining the plasma column shape, requires the measurement of magnetic present field outside plasma column. The measurements are carried out from a set of small coils, which are located inside the vacuum chamber in the radial and poloidal direction, so we can measure magnetic field with no current attenuations produced by the penetration time of the stainless steel vacuum chamber. The magnetic probe detect a real time variation of magnetic flux passing through them. In order to obtain the magnetic field values, it is required that the electric signals coming from the magnetic probe be integrated, this operation is carried out by active circuits located between the probe signal and one oscilloscope. The integrated signals can be exhibited photographed on the oscilloscope display. (Author)
Rapid further heating of tokamak plasma by fast-rising magnetic pulse
International Nuclear Information System (INIS)
Inoue, N.; Nihei, H.; Yamazaki, K.; Ichimura, M.; Morikawa, J.; Hoshino, K.; Uchida, T.
1977-01-01
The object of the experiment was to study the rapid further heating of a tokamak plasma and its influence on confinement. For this purpose, a high-voltage theta-pinch pulse was applied to a tokamak plasma and production of a high-temperature (keV) plasma was ensured within a microsecond. The magnetic pulse is applied at the plasma current maximum parallel or antiparallel to the study toroidal field. In either case, the pulsed field quickly penetrates the plasma and the plasma resistivity estimated from the penetration time is about 100 times larger than the classical. A burst of energetic neutrals of approximately 1 μs duration was observed and the energy distribution had two components of the order of 1 keV and 0.1 keV in the antiparallel case. Doppler broadening measurement shows heating of ions to a temperature higher than 200 eV; however, the line profile is not always Maxwellian distribution. The X-rays disappear at the moment of applying the magnetic pulse and reappear about 100 μs later with an intensive burst, while both energy levels are the same (approximately 100 keV). (author)
The analysis of Alfven wave current drive and plasma heating in TCABR tokamak
International Nuclear Information System (INIS)
Ruchko, L.F.; Lerche, E.A.; Galvao, R.M.O.; Elfimov, A.G.; Nascimento, I.C.; Sa, W.P. de; Sanada, E.; Elizondo, J.I.; Ferreira, A.A.; Saettone, E.A.; Severo, J.H.F.; Bellintani, V.; Usuriaga, O.N.
2002-01-01
The results of experiments on Alfven wave current drive and plasma heating in the TCABR tokamak are analyzed with the help of a numerical code for simulation of the diffusion of the toroidal electric field. It permits to find radial distributions of plasma current density and conductivity, which match the experimentally measured total plasma current and loop voltage changes, and thus to study the performance of the RF system during Alfven wave plasma heating and current drive experiments. Regimes with efficient RF power input in TCABR have been analyzed and revealed the possibility of noninductive current generation with magnitudes up to ∼8 kA. The increase of plasma energy content due to RF power input is consistent with the diamagnetic measurements. (author)
A method for measuring plasma position in the rectangular tokamak TJ-I
International Nuclear Information System (INIS)
Qin, J.; Ascasibar, E.; Pastor, I.; Navarro, A.P.; Ochando, M.A.; Pedrosa, M.A.; Rodriguez, L.; Sanchez, J.
1993-01-01
Determinations of plasma position in tokamaks are based on measuring the external magnetic field of the plasma current. Usually, the measurements are performed with magnetic coils along a closed contour around the plasma column, or with small magnetic probes in pairs positioned diametrically. However, such measurements are constrained in TJ-I because of a severe restriction on installing the magnetic probes. It is only possible to install some small magnetic probes inside the vacuum vessel near its top and bottom walls where the limiters stand. In this paper an alternative method of measuring plasma position in TJ-I is presented. The plasma position can be derived from the measurements of those magnetic probes located off the equatorial plane, with the aid of a filament model. The method is proved to be reliable, and would be applied to those small-size devices with similar restrictions. (author) 5 refs., 3 figs., 1 tab
Final Report: Spectral Analysis of L-shell Data in the Extreme Ultraviolet from Tokamak Plasmas
Energy Technology Data Exchange (ETDEWEB)
Lepson, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Jernigan, J. Garrett [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Beiersdorfer, P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
2016-02-05
We performed detailed analyses of extreme ultraviolet spectra taken by Lawrence Livermore National Laboratory on the National Spherical Torus Experiment at Princeton Plasma Physics Laboratory and on the Alcator CKmod tokamak at the M.I.T. Plasma Science and Fusion Center. We focused on the emission of iron, carbon, and other elements in several spectral band pass regions covered by the Atmospheric Imaging Assembly on the Solar Dynamics Observatory. We documented emission lines of carbon not found in currently used solar databases and demonstrated that this emission was due to charge exchange.
Role of boundary plasma in lower-hybrid-frequency heating of a tokamak
International Nuclear Information System (INIS)
Uehara, Kazuya; Yamamoto, Takumi; Fujii, Tsuneyuki
1982-01-01
Boundary plasma of a circular tokamak has been investigated by means of electrostatic probes during lower-hybrid heating. The reflection coefficient is affected by the density gradient in front of the launcher. An effective ion heating is performed in the main plasma region when the boundary electron temperature is relatively high enough to suppress the parametric decay instabilities. The simultaneous injection of neutral beams as well as the lower-hybrid wave brings the suppression of instabilities with increase of the electron temperature coming from the neutral beam heating. (author)
The Theory of the Kink Mode during the Vertical Plasma Disruption Events in Tokamaks
International Nuclear Information System (INIS)
Zakharov, Leonid E.
2008-01-01
This paper explains the locked m/n = 1/1 kink mode during the vertical disruption event when the plasma has an electrical contact with the plasma facing conducting surfaces. It is shown that the kink perturbation can be in equilibrium state even with a stable safety factor q > 1, if the halo currents, excited by the kink mode, can flow through the conducting structure. This suggests a new explanation of the so-called sideway forces on the tokamak in-vessel components during the disruption event.
Fokker--Planck/transport analyses of fusion plasmas in contemporary beam-driven tokamaks
International Nuclear Information System (INIS)
Mirin, A.A.; McCoy, M.G.; Killeen, J.; Rensink, M.E.; Shumaker, D.E.; Jassby, D.L.; Post, D.E.
1978-04-01
The properties of deuterium plasmas in experimental tokamaks heated and fueled by intense neutral-beam injection are evaluated with a Fokker-Planck/radial transport code coupled with a Monte Carlo neutrals treatment. Illustrative results are presented for the Poloidal Divertor Experiment at PPPL as a function of beam power and plasma recycling coefficient, R/sub c/. When P/sub beam/ = 8 MW at E/sub b/ = 60 keV, and R/sub c/ = 0.2, then approximately 0.5, [ 2 / 3 ] = 22 keV approximately 6 , and the D-D neutron intensity is 10 16 n/sec
Magnetic sensorless control of plasma position and shape in a tokamak
International Nuclear Information System (INIS)
Nakamura, K.; Luo, J.R.; Wang, H.Z.
2005-01-01
Magnetic sensorless sensing and control experiments of the plasma horizontal position have been carried out in the superconducting tokamak HT-7. The sensing is made focusing on the ripple frequency component of the power supply with thyristor and directly from them without time integration. There is no drift problem of integrator of magnetic sensors. Two kinds of control experiments were carried out, to keep the position constant and swing the position in a triangular waveform. And magnetic sensorless sensing of plasma shape is discussed. (author)
Losses of runaway electrons in MHD-active plasmas of the COMPASS tokamak.
Czech Academy of Sciences Publication Activity Database
Ficker, Ondřej; Mlynář, Jan; Vlainic, Milos; Čeřovský, Jaroslav; Urban, Jakub; Vondráček, Petr; Weinzettl, Vladimír; Macúšová, Eva; Decker, J.; Gospodarczyk, M.; Martin, P.; Nardon, E.; Papp, G.; Plyusnin, V.V.; Reux, C.; Saint-Laurent, F.; Sommariva, C.; Cavalier, Jordan; Havlíček, Josef; Havránek, Aleš; Hronová-Bilyková, Olena; Imríšek, Martin; Markovič, Tomáš; Varju, Jozef; Papřok, Richard; Pánek, Radomír; Hron, Martin
2017-01-01
Roč. 57, č. 7 (2017), č. článku 076002. ISSN 0029-5515 R&D Projects: GA MŠk LG14002; GA MŠk(CZ) LM2015045; GA MŠk(CZ) 8D15001 EU Projects: European Commission(XE) 633053 - EUROfusion Institutional support: RVO:61389021 Keywords : tokamaks * runaway electrons * MHD instabilities * disruptions Subject RIV: BL - Plasma and Gas Discharge Physics OBOR OECD: Fluids and plasma physics (including surface physics) Impact factor: 3.307, year: 2016
Plasmator. A numerical code for simulation of plasma transport in Tokamaks
International Nuclear Information System (INIS)
Guasp, J.
1979-01-01
Plasmator is a flexible monodimensional numerical code for plasma transport in Tokamaks of circular cross-section, it allows neutral particle transport and impurity effects. The code leaves a total freedom in the analytical form of transport coefficients. It has been writen in Fortran-V for the UNIVAC-1100/80 from JEN and allows for the possibility of graphics for radial profiles and temporal evolution of the main plasma magnitudes, as well in three-dimensional as in two-dimensional representation either on a Calcomp plotter or in the printer. (author)
Detection of the position and cross-section of a tokamak plasma with magnetic probes
International Nuclear Information System (INIS)
Aikawa, Hiroshi; Ogata, Atsushi; Suzuki, Yasuo
1977-02-01
The position and cross-sectional shape of a Tokamak plasma are obtained analytically from magnetic probe signals, taking into consideration the toroidal effect. Multipole moment analysis of the plasma current density, introducing the vertical asymmetry, shows the horizontal and vertical displacements and the elliptical deviation. The error in the measurement is estimated by means of the least square method. The observed error is proportional to the error of setting the probes, and inversely proportional to the square root of the number of probes. (auth.)
Multi-machine scaling of the main SOL parallel heat flux width in tokamak limiter plasmas
Czech Academy of Sciences Publication Activity Database
Horáček, Jan; Pitts, R.A.; Adámek, Jiří; Arnoux, G.; Bak, J.-G.; Brezinsek, S.; Dimitrova, Miglena; Goldston, R.J.; Gunn, J. P.; Havlíček, Josef; Hong, S.-H.; Janky, Filip; LaBombard, B.; Marsen, S.; Maddaluno, G.; Nie, L.; Pericoli, V.; Popov, Tsv.; Pánek, Radomír; Rudakov, D.; Seidl, Jakub; Seo, D.S.; Shimada, M.; Silva, C.; Stangeby, P.C.; Viola, B.; Vondráček, Petr; Wang, H.; Xu, G.S.; Xu, Y.
2016-01-01
Roč. 58, č. 7 (2016), č. článku 074005. ISSN 0741-3335 R&D Projects: GA ČR(CZ) GAP205/12/2327; GA ČR(CZ) GA15-10723S; GA MŠk(CZ) LM2011021 EU Projects: European Commission(XE) 633053 - EUROfusion Institutional support: RVO:61389021 Keywords : tokamak * ITER * SOL decay length * SOL width * scaling Subject RIV: BL - Plasma and Gas Discharge Physics OBOR OECD: Fluids and plasma physics (including surface physics) Impact factor: 2.392, year: 2016 http://iopscience.iop.org/article/10.1088/0741-3335/58/7/074005
Li-BES detection system for plasma turbulence measurements on the COMPASS tokamak
Czech Academy of Sciences Publication Activity Database
Berta, Miklós; Anda, G.; Bencze, A.; Dunai, D.; Háček, Pavel; Hron, Martin; Kovácsik, A.; Krbec, Jaroslav; Pánek, Radomír; Réfy, D.; Véres, G.; Weinzettl, Vladimír; Zoletnik, S.
96-97, October (2015), s. 795-798 ISSN 0920-3796. [Symposium on Fusion Technology 2014(SOFT-28)/28./. San Sebastián, 29.09.2014-03.10.2014] R&D Projects: GA MŠk(CZ) LM2011021 Institutional support: RVO:61389021 Keywords : BES * plasma diagnostics * COMPASS tokamak * density fluctuations * plasma density profile Subject RIV: JF - Nuclear Energetics OBOR OECD: Nuclear related engineering Impact factor: 1.301, year: 2015 http://www.sciencedirect.com/science/article/pii/S0920379615300442
Energy Technology Data Exchange (ETDEWEB)
Bergeaud, V
2001-11-01
In an ignited fusion reactor, the plasma temperature is sustained by the fusion reactions. However, before this regime is reached, it is necessary to bring an additional power to the plasma. One of the methods that enables the coupling of power is the use of an electromagnetic wave in the ion cyclotron range of frequencies (ICRF). This thesis deals with the interaction between ICRF heating and the fast ions. The thesis contains a theoretical study of the influence of ICRF heating on the ion distribution function. A particular emphasis is put on the importance of the toroidal spectrum of the modes of propagation of the wave in the tokamak. It is necessary to take into account all these modes in order to correctly assess the strength of the wave particle interaction, especially for high energy particles (of the order of hundreds of keV). The classical treatment of the wave particle interaction is based on the hypothesis that the cyclotron phase of the particle and the wave phase are de-correlated between successive resonant interactions. One is therefore led to consider ICRF heating as a diffusive process. This hypothesis is reconsidered in this thesis and it is shown that strong correlations exist in a large part of the velocity space. For this study, a numerical code that computes the full trajectory of particles interacting with a complete electromagnetic field has been developed. The thesis also deals with the problem of fast ion losses due to the breaking of the toroidal symmetry of the confinement magnetic field (called the ripple modulation). Between two toroidal coils, local magnetic wells exist, and particles can be trapped there. When trapped they undergo a vertical drift that makes them quit the plasma rapidly. The ripple modulation also causes an enhancement of the radial diffusion, thereby increasing the losses. A Monte Carlo model describing these mechanisms is presented. This model is validated thanks to a comparison with an experimental database from
Energy Technology Data Exchange (ETDEWEB)
Bergeaud, V
2000-12-01
In an ignited fusion reactor, the plasma temperature is sustained by the fusion reactions. However, before this regime is reached, it is necessary to bring an additional power to the plasma. One of the methods that enables the coupling of power is the use of an electromagnetic wave in the ion cyclotron range of frequencies (ICRF). This thesis deals with the interaction between ICRF heating and the fast ions. The thesis contains a theoretical study of the influence of ICRF heating on the ion distribution function. A particular emphasis is put on the importance of the toroidal spectrum of the modes of propagation of the wave in the tokamak. It is necessary to take into account all these modes in order to correctly assess the strength of the wave particle interaction, especially for high energy particles (of the order of hundreds of keV). The classical treatment of the wave particle interaction is based on the hypothesis that the cyclotron phase of the particle and the wave phase are de-correlated between successive resonant interactions. One is therefore led to consider ICRF heating as a diffusive process. This hypothesis is reconsidered in this thesis and it is shown that strong correlations exist in a large part of the velocity space. For this study, a numerical code that computes the full trajectory of particles interacting with a complete electromagnetic field has been developed. The thesis also deals with the problem of fast ion losses due to the breaking of the toroidal symmetry of the confinement magnetic field (called the ripple modulation). Between two toroidal coils, local magnetic wells exist, and particles can be trapped there. When trapped they undergo a vertical drift that makes them quit the plasma rapidly. The ripple modulation also causes an enhancement of the radial diffusion, thereby increasing the losses. A Monte Carlo model describing these mechanisms is presented. This model is validated thanks to a comparison with an experimental database from
Coherent structures in the boundary plasma of EAST Tokamak
DEFF Research Database (Denmark)
Yan, Ning
-facing material, leading to intensive transient heat load and particle load on the local areas of both the divertor target plates and the first wall, which damages the material and causes enhanced recycling and impurity generation, then further pollutes the core plasma. In this project, we carried out experiment...... in the boundary plasma using multi-pin Langmuir probe in L-mode discharge. It was found that the coherent structures (Blobs and Holes) are created in the edge shear layer of poloidal flows where the plasma shows steep pressure gradient. Simulations have been performed using the ESEL code, which is a 2D fluid...... turbulence-simulation code based on the interchange instability as the main drive for the turbulence and structure motion in the scrape-off layer (SOL) plasma, with the input parameters from the EAST experiments. The simulations successfully reproduce the statistical characteristics of the SOL turbulence...
Extended fluid transport theory in the tokamak plasma edge
Stacey, W. M.
2017-06-01
Fluid theory expressions for the radial particle and energy fluxes and the radial distributions of pressure and temperature in the edge plasma are derived from fundamental conservation (particle, energy, momentum) relations, taking into account kinetic corrections arising from ion orbit loss, and integrated to illustrate the dependence of the observed edge pedestal profile structure on fueling, heating, and electromagnetic and thermodynamic forces. Solution procedures for the fluid plasma and associated neutral transport equations are discussed.
Deuterium-tritium plasmas in novel regimes in the Tokamak Fusion Test Reactor
International Nuclear Information System (INIS)
Bell, M.G.; Beer, M.
1997-02-01
Experiments in the Tokamak Fusion Test Reactor (TFTR) have explored several novel regimes of improved tokamak confinement in deuterium-tritium (D-T) plasmas, including plasmas with reduced or reversed magnetic shear in the core and high-current plasmas with increased shear in the outer region (high-l i ). New techniques have also been developed to enhance the confinement in these regimes by modifying the plasma-limiter interaction through in-situ deposition of lithium. In reversed-shear plasmas, transitions to enhanced confinement have been observed at plasma currents up to 2.2 MA (q a ∼ 4.3), accompanied by the formation of internal transport barriers, where large radial gradients develop in the temperature and density profiles. Experiments have been performed to elucidate the mechanism of the barrier formation and its relationship with the magnetic configuration and with the heating characteristics. The increased stability of high-current, high-l i plasmas produced by rapid expansion of the minor cross-section, coupled with improvement in the confinement by lithium deposition has enabled the achievement of high fusion power, up to 8.7 MW, with D-T neutral beam heating. The physics of fusion alpha-particle confinement has been investigated in these regimes, including the interactions of the alphas with endogenous plasma instabilities and externally applied waves in the ion cyclotron range of frequencies. In D-T plasmas with q 0 > 1 and weak magnetic shear in the central region, a toroidal Alfven eigenmode instability driven purely by the alpha particles has been observed for the first time. The interactions of energetic ions with ion Bernstein waves produced by mode-conversion from fast waves in mixed-species plasmas have been studied as a possible mechanism for transferring the energy of the alphas to fuel ions
Mavkov, B.; Witrant, E.; Prieur, C.; Maljaars, E.; Felici, F.; Sauter, O.; the TCV-Team
2018-05-01
In this paper, model-based closed-loop algorithms are derived for distributed control of the inverse of the safety factor profile and the plasma pressure parameter β of the TCV tokamak. The simultaneous control of the two plasma quantities is performed by combining two different control methods. The control design of the plasma safety factor is based on an infinite-dimensional setting using Lyapunov analysis for partial differential equations, while the control of the plasma pressure parameter is designed using control techniques for single-input and single-output systems. The performance and robustness of the proposed controller is analyzed in simulations using the fast plasma transport simulator RAPTOR. The control is then implemented and tested in experiments in TCV L-mode discharges using the RAPTOR model predicted estimates for the q-profile. The distributed control in TCV is performed using one co-current and one counter-current electron cyclotron heating actuation.
Experimental study on plasma parameters in the mushroom limiter shadow in the T-10 tokamak
International Nuclear Information System (INIS)
Alferov, A.A.; Vershkov, V.A.; Grashin, S.A.; Chankin, A.V.
1988-01-01
Plasma parameters in the shadow of mashroom limiter installed in the lower tokamak outlet are studied. Investigation into asymmetry of plasma fluxes to the ion and electrone limiter sides leads to a consumption concerning two meachanisms of its occurrance-toroidal plasma rotation and prevailing plasma departure to the wall through the external torus encirclement. Asymmetry of plasma drift potentials near the limiter observed during the experiment leads to current drift through the limiter close to Spitzer j s one. It is shown that with the increase of mean plasma density the plasma density in the limiter channels grows and its temperature is decreased so the charged particle losses for the limiter are weakly dependent on the mean density which is connected with plasma confinement degradation under the density reduction. A complete flux of charged particles to the limiter is comparable to their flux from plasma filament. Plasma flux into the channels is close to ambipolar one and the power fluxes to neutralization plates are of the order of 10 j s Te/e. Neutral gas pressure dependence in the volume under the limiter on the plasma fluxes to channels is nonlinear, the maximum pressure achieves 3x10 -2 T
Theoretical Considerations for Liquid Jet Injection into Tokamak Plasmas
Parks, P. B.; Rosenbluth, M. N.; Sessions, W. D.; Geskin, E.; Jardin, S. C.
1997-11-01
The purpose of hydrogen, or helium, liquid jet injection for high-current ITER-like plasmas is to deliver a rapid and massive plasma density increase in order to prevent ``avalanche'' runaway electron formation during disruptions and preemptive plasma terminations. Multiple pellet injection may be too slow for this purpose, and killer impurity pellets can cause runaways and because of their limited penetration range, can generate steep pressure gradients, leading to a core energy quench. After complete jet burnthrough and isobaric cooling, a nearly flat temperature profile of a few hundred eV is established which can provide a pathway for deep penetration of a killer ``stealth" pellet that takes out the thermal and magnetic energy by radiative dissipation. This disruption mitigation blueprint is being studied for ITER using a recently modified jet ablation theory coupled with the TSC plasma simulation code. Also discussed is a LHe or LCH4 jet injection concept for future plasma quench and disruption mitigation experiments in DIII--D.
Improved calculation of synchrotron radiation losses in realistic tokamak plasmas
International Nuclear Information System (INIS)
Albajar, F.; Johner, J.; Granata, G.
2001-01-01
Owing to the complexity of the exact calculation, synchrotron losses are usually estimated in system studies, with expressions derived from a plasma description using simplifying assumptions on the geometry, radiation absorption, and density and temperature profiles. In the present article, a complete formulation of the transport of synchrotron radiation is performed for realistic conditions of toroidal plasma geometry with elongated cross-section, using a quasi-exact method for the calculation of the absorption coefficients, and for arbitrary shapes of density and temperature profiles. The effects of toroidicity and temperature profile on synchrotron radiation losses are analysed in detail. In particular, when the electron temperature profile is almost flat in the plasma centre as, for example, in internal transport barrier confinement regimes, synchrotron losses are found to be much stronger than in the case where the profile is represented by its best generalized parabolic approximation, though both cases give approximately the same thermal energy content. Such an effect is not included in presently used approximate expressions. As an illustration, it is shown that in the case of an advanced high temperature plasma envisaged for a steady state commercial reactor, synchrotron losses represent approximately 20% of the total losses, so that this term becomes significant in the power balance of such a plasma. Finally, the authors propose a seven variable fit for the fast calculation of synchrotron radiation losses. This fit is derived from a large database which has been generated using a code implementing the complete formulation, and is optimized for massively parallel computing. (author)
Approach to rapid plasma shape diagnostics in tokamaks
International Nuclear Information System (INIS)
Lee, D.K.; Peng, Y.K.M.
1980-07-01
A deterministic approach to estimating the plasma boundary shape and location, based only on the signals of small B vector pickup loops in the vicinity of the plasma, is studied. The pickup loops provide information on par. delta B/sub R//par. delta t and B/sub Z//par. delta t, which can be processed to provide data on B/sub R/, B/sub Z/, psi, and psi/par. delta n (normal derivative), thus leading to a Cauchy boundary condition for solving Δ*psi = 0 between the loop locations and the plasma boundary flux surface. Numerical equilibria calculated for the Impurity Study Experiment (ISX-B) with different shapes are used to simulate pickup loop signals. Random errors are added to the signals to test the efficacy of two different approaches: global fitting and local fitting. Reasonably accurate results are obtained by the method of global fitting of the boundary values, which is based on the expansion of psi in terms of eigenfunctions of Δ*psi = 0 in a toroidal ring coordinate system. This approach is shown to permit a random error of nearly 100% in poloidal B vector field values at the loops and still reproduce the plasma shape and location within a few percent. This method appears to have the potential of rapidly displaying the plasma shape and location
Lower hybrid heating experiments in tokamaks: an overview
International Nuclear Information System (INIS)
Porkolab, M.
1985-10-01
Lower hybrid wave propagation theory relevant to heating fusion grade plasmas (tokamaks) is reviewed. A brief discussion of accessibility, absorption, and toroidal ray propagation is given. The main part of the paper reviews recent results in heating experiments on tokamaks. Both electron and ion heating regimes will be discussed. The prospects of heating to high temperatures in reactor grade plasmas will be evaluated
Finite beta effects on turbulent transport in tokamak plasmas
International Nuclear Information System (INIS)
Hein, Tobias
2011-01-01
The research on the transport properties of magnetically confined plasmas plays an essential role towards the achievement of practical nuclear fusion energy. An economically viable fusion reactor is expected to operate at high plasma pressure. This implies that the detailed study of the impact of electromagnetic effects, whose strength increases with increasing pressure, is of critical importance. In the present work, the electromagnetic effects on the particle, momentum and heat transport channels have been investigated, with both analytical and numerical calculations. Transport processes due to a finite plasma pressure have been identified, their physical mechanisms have been explained, and their contributions have been quantified, showing that they can be significant under experimentally relevant conditions.
Impurity transport in a collision-dominated rotating tokamak plasma
International Nuclear Information System (INIS)
Eriksson, G.; Liljegren, A.
1981-04-01
The flux of heavy impurities is an axisymmetric, toroidal plasma with all particles in the collision-dominated regime is considered. Plasma rotation and charge-exchange with neutrals are taken into account. A hydrodynamic model employing Braginskii's transport equations is used. The theorry is extended to higher collision freqencies as compared to previous treatments. It is found that the Pfirsch-Schlueter flux is significantly reduced as compared to the value given by Rutherford and that it is of the same order of magnitude, or less, than the classical flux in all regimes considered. It is also shown that the impurity flux can be influenced by charge-exchange with neutrals. (author)
Parametric study of plasma startup systems for tokamaks
International Nuclear Information System (INIS)
Vogel, H.F.
1977-01-01
Plasma initiation from a poloidal coil set is discussed for inducing the startup voltage where no magnetic flux is generated in the plasma region. A mathematical expression is reported which states the current distribution necessary in a toroidal shell for the zero field condition inside. The combination of the startup coil in one physical unit with the vertical field coil is considered. A flux plot is discussed for the case that the coil set is mounted outside the toroidal field coils and iron used for reducing the magnetic field energy
Poloidal asymmetries in the limiter shadow plasma of the Alcator C tokamak. Volume 1
International Nuclear Information System (INIS)
LaBombard, B.
1986-05-01
This thesis investigates conditions which exist in the limiter shadow plasma of the Alcator C tokamak. The understanding of this edge plasma region is approached from both experimental and theoretical points of view. First, a general overview of edge plasma physical processes is presented. Simple edge plasma models and conditions which can theoretically result in a poloidally asymmetric edge plasma are discussed. A review of data obtained from previous diagnostics in the Alcator C edge plasma is then used to motivate the development of a new edge plasma diagnostic system (DENSEPACK) to experimentally investigate poloidal asymmetries in this region. The bulk of this thesis focuses on the marked poloidal asymmetries detected by this poloidal probe array and possible mechanisms which might support such asymmetries on a magnetic flux surface. In processing the probe data, some important considerations on fitting Langmuir probe characteristics are identified. The remainder of this thesis catalogues edge versus central plasma parameter dependences. Regression analysis techniques are applied to characterize edge density for various central plasma parameters. Edge plasma conditions during lower hybrid radio frequency heating and pellet injection are also discussed
Negative edge plasma currents in the SINP tokamak
Indian Academy of Sciences (India)
X-ray flux ejected out from the plasma column, with reduced magnetic fluctuations. We have made use of an IRC and has been able to show that the improvement in confinement properties is observed in the presence of sustained negative currents. These negative cur- rents have been observed to be initiated after the fall of ...
Analysis of tokamak plasma confinement modes using the fast ...
Indian Academy of Sciences (India)
2016-10-20
Oct 20, 2016 ... without external field (electric biasing), and then compared it with each other. After the Fourier analysis of Mirnov coil data, the ... radial electric field at the plasma edge. It is commonly accepted that improvement of ... The biased electrode drives a radial cur- rent between itself and the vacuum vessel and the.
Modeling of transport phenomena in tokamak plasmas with neural networks
Energy Technology Data Exchange (ETDEWEB)
Meneghini, O., E-mail: meneghini@fusion.gat.com [Oak Ridge Associated Universities, 120 Badger Ave, Oak Ridge, Tennessee 37830 (United States); Luna, C. J. [Arizona State University, 411 N. Central Ave, Phoenix, Arizona 85004 (United States); Smith, S. P.; Lao, L. L. [General Atomics, San Diego, California 92186-5608 (United States)
2014-06-15
A new transport model that uses neural networks (NNs) to yield electron and ion heat flux profiles has been developed. Given a set of local dimensionless plasma parameters similar to the ones that the highest fidelity models use, the NN model is able to efficiently and accurately predict the ion and electron heat transport profiles. As a benchmark, a NN was built, trained, and tested on data from the 2012 and 2013 DIII-D experimental campaigns. It is found that NN can capture the experimental behavior over the majority of the plasma radius and across a broad range of plasma regimes. Although each radial location is calculated independently from the others, the heat flux profiles are smooth, suggesting that the solution found by the NN is a smooth function of the local input parameters. This result supports the evidence of a well-defined, non-stochastic relationship between the input parameters and the experimentally measured transport fluxes. The numerical efficiency of this method, requiring only a few CPU-μs per data point, makes it ideal for scenario development simulations and real-time plasma control.
International Nuclear Information System (INIS)
Salem, S.L.; Listvinsky, G.; Lee, M.Y.; Bailey, C.
1987-01-01
Studies of the electromagnetic loads produced by a variety of plasma disruptions, and the resulting structural effects on the compact Ignition Tokamak (CIT) vacuum vessel (VV), have been performed to help optimize the VV design. A series of stationary and moving plasmas, with disruption rates from 0.7--10.0 MA/ms, have been analyzed using the EMPRES code to compute eddy currents and electromagnetic pressures, and the NASTRAN code to evaluate the structural response of the vacuum vessel. Key factors contributing to the magnitude of EM forces and resulting stresses on the vessel have been found to include disruption rate, and direction and synchronization of plasma motion with the onset of plasma current decay. As a result of these analyses, a number of design changes have been made, and design margins for the present 1.75 meter design have been improved over the original CIT configuration. 1 ref., 10 figs., 4 tabs
International Nuclear Information System (INIS)
Moreau, D.
1993-04-01
It is studied, on the one hand, how using hybrid waves with frequency near from lower hybrid frequency in fusion plasma. Works about coupling waves in plasma (chap.I), their propagation and response of the plasma to the absorption of the waves (chap.II). This method is the most effective until today. Because of limits, it has been investigated, on the other hand, fast magnetosonic wave to control current density in the centre of the discharge in a reactor or a very hot plasma. Theoretical study (chap.III) and experimental results (chap.IV) are presented. Experiments are in progress or planned in following tokamaks: D3-D (USA), JET (Europe), TORE SUPRA (France), JT-60 (Japan). figs. refs. tabs
ISTTOK tokamak plasmas influence on a liquid gallium jet dynamic behavior
International Nuclear Information System (INIS)
Gomes, R.B.; Silva, C.; Fernandes, H.; Duarte, P.; Nedzelskiy, I.; Lielausis, O.; Klyukin, A.; Platacis, E.
2011-01-01
The main concern in using free flowing liquid metals in fusion devices is related to their interaction with magnetic fields. On ISTTOK tokamak, liquid gallium jets are injected deep into the plasma along a vertical direction. The influence of the plasma interaction on the jet has been investigated monitoring the liquid metal behavior using a fast frame camera. A radial shift on its trajectory has been detected and found to depend on the toroidal magnetic field magnitude and principally on the plasma position within the chamber. The analysis performed to understand the dynamics of the jet perturbation by the plasma is presented in this paper. The jet surface temperature increase during this interaction has also been measured, using absolutely calibrated multichannel IR sensors, to evaluate the jet power exhaustion capability.
ISTTOK tokamak plasmas influence on a liquid gallium jet dynamic behavior
Energy Technology Data Exchange (ETDEWEB)
Gomes, R.B., E-mail: gomes@ipfn.ist.utl.pt [Associacao EURATOM/IST, Instituto de Plasmas e Fusao Nuclear - Laboratorio Associado, Instituto Superior Tecnico, 1049-001 Lisboa (Portugal); Silva, C.; Fernandes, H.; Duarte, P.; Nedzelskiy, I. [Associacao EURATOM/IST, Instituto de Plasmas e Fusao Nuclear - Laboratorio Associado, Instituto Superior Tecnico, 1049-001 Lisboa (Portugal); Lielausis, O.; Klyukin, A.; Platacis, E. [Association EURATOM/University of Latvia, Institute of Solid State Physics, 8 Kengaraga Str., LV-1063 Riga (Latvia)
2011-08-01
The main concern in using free flowing liquid metals in fusion devices is related to their interaction with magnetic fields. On ISTTOK tokamak, liquid gallium jets are injected deep into the plasma along a vertical direction. The influence of the plasma interaction on the jet has been investigated monitoring the liquid metal behavior using a fast frame camera. A radial shift on its trajectory has been detected and found to depend on the toroidal magnetic field magnitude and principally on the plasma position within the chamber. The analysis performed to understand the dynamics of the jet perturbation by the plasma is presented in this paper. The jet surface temperature increase during this interaction has also been measured, using absolutely calibrated multichannel IR sensors, to evaluate the jet power exhaustion capability.
Feedback stabilization of the axisymmetric instability of a deformable tokamak plasma
International Nuclear Information System (INIS)
Pomphrey, N.; Jardin, S.C.; Ward, D.J.
1989-01-01
The paper presents an analysis of the magnetohydrodynamic stability of the axisymmetric system consisting of a free boundary tokamak plasma with non-circular cross-section, finite resistivity passive conductors, and an active feedback system with magnetic flux pickup loops, a proportional amplifier with gain G and current carrying poloidal field coils. A numerical simulation of the system when G is set to zero identifies flux loop locations which correctly sense the plasma motion. However, when certain of these locations are incorporated into an active feedback scheme, the plasma fails to be stabilized, no matter what value of the gain is chosen. Analysis on the basis of an extended energy principle indicates that this failure is due to the deformability of the plasma cross-section. (author). 14 refs, 7 figs
Exposure of W-TiC/Cu Functionally Graded Materials in the Edge Plasma of HT-7 Tokamak
International Nuclear Information System (INIS)
Liu Yang; Zhu Dahuan; Chen Junling; Yan Rong; Zhou Zhangjian
2012-01-01
Six-layered W-TiC/Cu functionally graded materials were fabricated by resistance sintering under ultra-high pressure and exposed in the edge plasma of HT-7 tokamak. Microstructure morphologies show that the TiC particles distribute homogeneously in the W matrix, strengthening the grain boundary, while gradient layers provide a good compositional transition from W-TiC to Cu. After about 360 shots in the HT-7 tokamak, clear surface modification can be observed after plasma exposure, and the addition of nano TiC particles is beneficial to the improvement of plasma loads resistance of W.
Study of fusion plasma microturbulence by reflectometry in Tore Supra tokamak
International Nuclear Information System (INIS)
Gerbaud, Th.
2008-11-01
Fast-sweeping reflectometry in extraordinary mode allows direct measurement of radial wave-number local spectra S(δ n /n](k r ,r), and radial profiles of density fluctuations, on Tore Supra tokamak. Wavelet-based approach - a mathematical tool for position-frequency analysis - made possible to consider the strong radial variation of the measured turbulence. Special consideration was given to the validation of spectra and turbulent profiles measurements, by comparing with experimental measurements (reflectometry, probes) and numerical non-linear gyrokinetic simulations. This density fluctuations measurement method has been used to analyse the local transport, by performing a dimensionless scaling on collisionality, ν * . The scaling experiments allow direct comparisons of plasmas from different tokamaks. A clear decrease of the normalized confinement time of the plasma energy with the normalized collisionality was observed: Bτ E ∼ ν *-0.5±0.15 . These new measurements of density fluctuations profiles have shown an intense rise of the edge turbulence (r/a > 0.8) when increasing - also observed by Doppler reflectometry diagnostic - providing a physical explanation of the loss of confinement with the normalized collisionality. More central regions did not present apparent variations (δ n /n, χ(eff)). Core plasma simulations (linear stability code KineZero and non-linear gyrokinetic GYRO) were performed, in order to analyse the experimental behaviour of the plasma. (author)
Identification and control of plasma vertical position using neural network in Damavand tokamak
Energy Technology Data Exchange (ETDEWEB)
Rasouli, H. [School of Plasma Physics and Nuclear Fusion, Institute of Nuclear Science and Technology, AEOI, P.O. Box 14155-1339, Tehran (Iran, Islamic Republic of); Advanced Process Automation and Control (APAC) Research Group, Faculty of Electrical Engineering, K.N. Toosi University of Technology, P.O. Box 16315-1355, Tehran (Iran, Islamic Republic of); Rasouli, C.; Koohi, A. [School of Plasma Physics and Nuclear Fusion, Institute of Nuclear Science and Technology, AEOI, P.O. Box 14155-1339, Tehran (Iran, Islamic Republic of)
2013-02-15
In this work, a nonlinear model is introduced to determine the vertical position of the plasma column in Damavand tokamak. Using this model as a simulator, a nonlinear neural network controller has been designed. In the first stage, the electronic drive and sensory circuits of Damavand tokamak are modified. These circuits can control the vertical position of the plasma column inside the vacuum vessel. Since the vertical position of plasma is an unstable parameter, a direct closed loop system identification algorithm is performed. In the second stage, a nonlinear model is identified for plasma vertical position, based on the multilayer perceptron (MLP) neural network (NN) structure. Estimation of simulator parameters has been performed by back-propagation error algorithm using Levenberg-Marquardt gradient descent optimization technique. The model is verified through simulation of the whole closed loop system using both simulator and actual plant in similar conditions. As the final stage, a MLP neural network controller is designed for simulator model. In the last step, online training is performed to tune the controller parameters. Simulation results justify using of the NN controller for the actual plant.
Identification and control of plasma vertical position using neural network in Damavand tokamak
Rasouli, H.; Rasouli, C.; Koohi, A.
2013-02-01
In this work, a nonlinear model is introduced to determine the vertical position of the plasma column in Damavand tokamak. Using this model as a simulator, a nonlinear neural network controller has been designed. In the first stage, the electronic drive and sensory circuits of Damavand tokamak are modified. These circuits can control the vertical position of the plasma column inside the vacuum vessel. Since the vertical position of plasma is an unstable parameter, a direct closed loop system identification algorithm is performed. In the second stage, a nonlinear model is identified for plasma vertical position, based on the multilayer perceptron (MLP) neural network (NN) structure. Estimation of simulator parameters has been performed by back-propagation error algorithm using Levenberg-Marquardt gradient descent optimization technique. The model is verified through simulation of the whole closed loop system using both simulator and actual plant in similar conditions. As the final stage, a MLP neural network controller is designed for simulator model. In the last step, online training is performed to tune the controller parameters. Simulation results justify using of the NN controller for the actual plant.
Plasma cleaning of ITER edge Thomson scattering mock-up mirror in the EAST tokamak
Yan, Rong; Moser, Lucas; Wang, Baoguo; Peng, Jiao; Vorpahl, Christian; Leipold, Frank; Reichle, Roger; Ding, Rui; Chen, Junling; Mu, Lei; Steiner, Roland; Meyer, Ernst; Zhao, Mingzhong; Wu, Jinhua; Marot, Laurent
2018-02-01
First mirrors are the key element of all optical and laser diagnostics in ITER. Facing the plasma directly, the surface of the first mirrors could be sputtered by energetic particles or deposited with contaminants eroded from the first wall (tungsten and beryllium), which would result in the degradation of the reflectivity. The impurity deposits emphasize the necessity of the first mirror in situ cleaning for ITER. The mock-up first mirror system for ITER edge Thomson scattering diagnostics has been cleaned in EAST for the first time in a tokamak using radio frequency capacitively coupled plasma. The cleaning properties, namely the removal of contaminants and homogeneity of cleaning were investigated with molybdenum mirror insets (25 mm diameter) located at five positions over the mock-up plate (center to edge) on which 10 nm of aluminum oxide, used as beryllium proxy, were deposited. The cleaning efficiency was evaluated using energy dispersive x-ray spectroscopy, reflectivity measurements and x-ray photoelectron spectroscopy. Using argon or neon plasma without magnetic field in the laboratory and with a 1.7 T magnetic field in the EAST tokamak, the aluminum oxide films were homogeneously removed. The full recovery of the mirrors’ reflectivity was attained after cleaning in EAST with the magnetic field, and the cleaning efficiency was about 40 times higher than that without the magnetic field. All these results are promising for the plasma cleaning baseline scenario of ITER.
Real-time software for the COMPASS tokamak plasma control
Czech Academy of Sciences Publication Activity Database
Valcárcel, D.F.; Duarte, A.S.; Neto, A.; Carvalho, I.S.; Carvalho, B.B.; Fernandes, H.; Sousa, J.; Sartori, F.; Janky, Filip; Cahyna, Pavel; Hron, Martin; Pánek, Radomír
2010-01-01
Roč. 85, 3-4 (2010), s. 470-473 ISSN 0920-3796. [IAEA Technical Meeting on Control, Data Acquisition and Remote Participation for Fusion Research/7th./. Aix – en – Provence, 15.06.2009-19.06.2009] Institutional research plan: CEZ:AV0Z20430508 Keywords : Real-time * ATCA * Data acquisition * Plasma control software Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 1.143, year: 2010 http://www.sciencedirect.com/science?_ob=ArticleURL&_udi=B6V3C-4YXMP1Y-3&_user=6542793&_coverDate=07%2F31%2F2010&_rdoc=1&_fmt=high&_orig=search&_origin=search&_sort=d&_docanchor=&view=c&_acct=C000070123&_version=1&_urlVersion=0&_userid=6542793&md5=9005df0735c0dbb3a93a9c154b0d09c1&searchtype=a
Modeling of ICRF heating of a tokamak plasma
International Nuclear Information System (INIS)
Hwang, D.Q.; Karney, C.F.F.; Hosea, J.C.; Hovey, J.M.; Singer, C.E.; Wilson, J.R.
1983-05-01
A model for wave propagation and absorption of the Ion Cyclotron Range of Frequencies (ICRF) has been constructed and fitted into the 1-D BALDUR transport code. The wave propagation is handled by ray tracing techniques. Wave absorption is calculated using the Fokker-Planck equation and quasilinear diffusion. The wave propagation and damping profiles are evolved in time according to the plasma evolution. A simulation of PLT hydrogen minority ICRF heating with a comparison to experimental data is given
On the universality of power laws for tokamak plasma predictions
Garcia, J.; Cambon, D.; Contributors, JET
2018-02-01
Significant deviations from well established power laws for the thermal energy confinement time, obtained from extensive databases analysis as the IPB98(y,2), have been recently reported in dedicated power scans. In order to illuminate the adequacy, validity and universality of power laws as tools for predicting plasma performance, a simplified analysis has been carried out in the framework of a minimal modeling for heat transport which is, however, able to account for the interplay between turbulence and collinear effects with the input power known to play a role in experiments with significant deviations from such power laws. Whereas at low powers, the usual scaling laws are recovered with little influence of other plasma parameters, resulting in a robust power low exponent, at high power it is shown how the exponents obtained are extremely sensitive to the heating deposition, the q-profile or even the sampling or the number of points considered due to highly non-linear behavior of the heat transport. In particular circumstances, even a minimum of the thermal energy confinement time with the input power can be obtained, which means that the approach of the energy confinement time as a power law might be intrinsically invalid. Therefore plasma predictions with a power law approximation with a constant exponent obtained from a regression of a broad range of powers and other plasma parameters which can non-linearly affect and suppress heat transport, can lead to misleading results suggesting that this approach should be taken cautiously and its results continuously compared with modeling which can properly capture the underline physics, as gyrokinetic simulations.
Helical flow in RFX-mod tokamak plasmas
Piron, L.; Zaniol, B.; Bonfiglio, D.; Carraro, L.; Kirk, A.; Marrelli, L.; Martin, R.; Piron, C.; Piovesan, P.; Zuin, M.
2017-05-01
This work presents the first evidence of helical flow in RFX-mod q(a) predicted by several codes, such as Specyl (Bonfiglio et al 2005 Phys. Rev. Lett. 94 145001), PIXIE3D (Chacón et al 2008 Phys. Plasmas 15 056103), NIMROD (King et al 2012 Phys. Plasmas 19 055905) and M3D-C1 (Jardin et al 2015 Phys. Rev. Lett. 115 215001). Among them, the 3D fully non-linear PIXIE3D has been used to calculate synthetic flow measurements, using a 2D flow modelling code. Inputs to the code are the PIXIE3D flow maps, the ion emission profiles as calculated by a 1D collisional radiative impurity transport code (Carraro et al 2000 Plasma Phys. Control. Fusion 42 731) and a synthetic diagnostic with the same geometry installed in RFX-mod. Good agreement between the synthetic and the experimental flow behaviour has been obtained, confirming that the flow oscillations observed with the associated convective cells are a signature of helical flow.
Liquid jets for fast plasma termination in tokamaks
International Nuclear Information System (INIS)
Rosenbluth, M.N.; Putvinskij, S.V.; Parks, P.B.
1997-01-01
Recent simulations by Putvisnkij et al. (PSI Conference, 1996) have shown that introducing impurities into the plasma in order to mitigate adverse disruption effects in ITER may actually be deleterious because of a potentially unwelcome phenomenon: generation of multi-MeV runaway electrons by the collisional avalanche mechanism (Rosenbluth, M.N., et al., in Fusion Energy 1996 (Proc. 16th Int. Conf. Montreal, 1996) Vol. 2, IAEA, Vienna (in press) Paper FP-26). The injection of a liquid hydrogen jet to deliver a massive density increase is proposed as a means of avoiding runaways, while providing the same beneficial effects as impurities. A discussion of many jet related topics, such as ablation/penetration, jet breakup time and stability, is presented. Owing to an ablation pressure instability, it is predicted that the jet will quickly break up into a regular chain of droplets with dimensions of approximately the size of the jet radius. It is found that while deep penetration in the plasma can easily be achieved, bubble growth and disruptive boiling (flashing) during the propagation in the vacuum gap between the nozzle exit and the plasma are the main processes limiting the jet survival time. Calculations indicate that for ITER reference parameters, the jet can remain coherent in vacuum for a distance ∼ 1 m before disintegrating. On the basis of this present understanding, the prospect for the safe termination of ITER discharges by high density liquid jet injection appears promising. (author). 20 refs, 6 figs, 3 tabs
International Nuclear Information System (INIS)
Talvard, M.
1984-10-01
It is shown how the properties of the electron cyclotron emission of a tokamak plasma can be used to measure the electron temperature. The design of a six channel Fabry-Perot interferometer is then described. This interferometer allows the measurement of the time evolution of the electron temperature profile of the plasma in the TFR tokamak. Using this technique interesting results have been obtained concerning the current penetration during the start up phase of a tokamak discharge [fr
Energy Technology Data Exchange (ETDEWEB)
Chung, Kyu Sun; Chang, Do Hee; Sim, Yeon Gun; Kim, Jin Hee [Hanyang University, Seoul (Korea, Republic of)
1995-08-01
Electric transport probe system is developed for the measurement of electron temperature, floating potential, plasma density and flow velocity of= edge plasmas in the KT-2 medium size tokamak. Experiments have been performed in KT-1 small size tokamak. Electric transport probe is composed of a single probe(SP) and a Mach probe (MP). SP is used for the measurements of electron density, floating potential, and plasma density and measured values are {approx} 3*10{sup 11}/cm{sup -3}, -20 volts, 15 {approx} 25 eV. For the most discharges, respectively. MP is for the measurements of toroidal(M{sub T}) and poloidal(M{sub P}) flow velocities, and density, which are M{sub T} {approx_equal} .0.85, M{sub P} {approx_equal}. 0.17, n. {approx_equal} 2.1*10{sup 11} cm{sup -3}, respectively. A triple probe is also developed for the direct reading of T{sub e} and n{sub e}, and is used for DC, RF, and RF+DC plasma in APL of Hanyang university. 38 refs., 36 figs. (author)
Response of plasma rotation to resonant magnetic perturbations in J-TEXT tokamak
Yan, W.; Chen, Z. Y.; Huang, D. W.; Hu, Q. M.; Shi, Y. J.; Ding, Y. H.; Cheng, Z. F.; Yang, Z. J.; Pan, X. M.; Lee, S. G.; Tong, R. H.; Wei, Y. N.; Dong, Y. B.; J-TEXT Team
2018-03-01
The response of plasma toroidal rotation to the external resonant magnetic perturbations (RMP) has been investigated in Joint Texas Experimental Tokamak (J-TEXT) ohmic heating plasmas. For the J-TEXT’s plasmas without the application of RMP, the core toroidal rotation is in the counter-current direction while the edge rotation is near zero or slightly in the co-current direction. Both static RMP experiments and rotating RMP experiments have been applied to investigate the plasma toroidal rotation. The core toroidal rotation decreases to lower level with static RMP. At the same time, the edge rotation can spin to more than 20 km s‑1 in co-current direction. On the other hand, the core plasma rotation can be slowed down or be accelerated with the rotating RMP. When the rotating RMP frequency is higher than mode frequency, the plasma rotation can be accelerated to the rotating RMP frequency. The plasma confinement is improved with high frequency rotating RMP. The plasma rotation is decelerated to the rotating RMP frequency when the rotating RMP frequency is lower than the mode frequency. The plasma confinement also degrades with low frequency rotating RMP.
MHD instabilities in astrophysical plasmas: very different from MHD instabilities in tokamaks!
Goedbloed, J. P.
2018-01-01
The extensive studies of MHD instabilities in thermonuclear magnetic confinement experiments, in particular of the tokamak as the most promising candidate for a future energy producing machine, have led to an ‘intuitive’ description based on the energy principle that is very misleading for most astrophysical plasmas. The ‘intuitive’ picture almost directly singles out the dominant stabilizing field line bending energy of the Alfvén waves and, consequently, concentrates on expansion schemes that minimize that contribution. This happens when the wave vector {{k}}0 of the perturbations, on average, is perpendicular to the magnetic field {B}. Hence, all macroscopic instabilities of tokamaks (kinks, interchanges, ballooning modes, ELMs, neoclassical tearing modes, etc) are characterized by satisfying the condition {{k}}0 \\perp {B}, or nearly so. In contrast, some of the major macroscopic instabilities of astrophysical plasmas (the Parker instability and the magneto-rotational instability) occur when precisely the opposite condition is satisfied: {{k}}0 \\parallel {B}. How do those instabilities escape from the dominance of the stabilizing Alfvén wave? The answer to that question involves, foremost, the recognition that MHD spectral theory of waves and instabilities of laboratory plasmas could be developed to such great depth since those plasmas are assumed to be in static equilibrium. This assumption is invalid for astrophysical plasmas where rotational and gravitational accelerations produce equilibria that are at best stationary, and the associated spectral theory is widely, and incorrectly, believed to be non-self adjoint. These complications are addressed, and cured, in the theory of the Spectral Web, recently developed by the author. Using this method, an extensive survey of instabilities of astrophysical plasmas demonstrates how the Alfvén wave is pushed into insignificance under these conditions to give rise to a host of instabilities that do not
International Nuclear Information System (INIS)
Rawls, J.M.
1979-10-01
An overall review of the tokamak program is given with particular emphasis upon developments over the past five years in the theoretical and experimental elements of the program. A summary of the key operating parameters for the principal tokamaks throughout the world is given. Also discussed are key issues in plasma confinement, plasma heating, and tokamak design
Energy Technology Data Exchange (ETDEWEB)
Rawls, J.M. (ed.)
1979-10-01
An overall review of the tokamak program is given with particular emphasis upon developments over the past five years in the theoretical and experimental elements of the program. A summary of the key operating parameters for the principal tokamaks throughout the world is given. Also discussed are key issues in plasma confinement, plasma heating, and tokamak design. (MOW)
Predictive modelling of edge transport phenomena in ELMy H-mode tokamak fusion plasmas
Energy Technology Data Exchange (ETDEWEB)
Loennroth, J.-S.
2009-07-01
This thesis discusses a range of work dealing with edge plasma transport in magnetically confined fusion plasmas by means of predictive transport modelling, a technique in which qualitative predictions and explanations are sought by running transport codes equipped with models for plasma transport and other relevant phenomena. The focus is on high confinement mode (H-mode) tokamak plasmas, which feature improved performance thanks to the formation of an edge transport barrier. H-mode plasmas are generally characterized by the occurrence of edge localized modes (ELMs), periodic eruptions of particles and energy, which limit confinement and may turn out to be seriously damaging in future tokamaks. The thesis introduces schemes and models for qualitative study of the ELM phenomenon in predictive transport modelling. It aims to shed new light on the dynamics of ELMs using these models. It tries to explain various experimental observations related to the performance and ELM-behaviour of H-mode plasmas. Finally, it also tries to establish more generally the potential effects of ripple-induced thermal ion losses on H-mode plasma performance and ELMs. It is demonstrated that the proposed ELM modelling schemes can qualitatively reproduce the experimental dynamics of a number of ELM regimes. Using a theory-motivated ELM model based on a linear instability model, the dynamics of combined ballooning-peeling mode ELMs is studied. It is shown that the ELMs are most often triggered by a ballooning mode instability, which renders the plasma peeling mode unstable, causing the ELM to continue in a peeling mode phase. Understanding the dynamics of ELMs will be a key issue when it comes to controlling and mitigating the ELMs in future large tokamaks. By means of integrated modelling, it is shown that an experimentally observed increase in the ELM frequency and deterioration of plasma confinement triggered by external neutral gas puffing might be due to a transition from the second to
Predictive modelling of edge transport phenomena in ELMy H-mode tokamak fusion plasmas
International Nuclear Information System (INIS)
Loennroth, J.-S.
2009-01-01
This thesis discusses a range of work dealing with edge plasma transport in magnetically confined fusion plasmas by means of predictive transport modelling, a technique in which qualitative predictions and explanations are sought by running transport codes equipped with models for plasma transport and other relevant phenomena. The focus is on high confinement mode (H-mode) tokamak plasmas, which feature improved performance thanks to the formation of an edge transport barrier. H-mode plasmas are generally characterized by the occurrence of edge localized modes (ELMs), periodic eruptions of particles and energy, which limit confinement and may turn out to be seriously damaging in future tokamaks. The thesis introduces schemes and models for qualitative study of the ELM phenomenon in predictive transport modelling. It aims to shed new light on the dynamics of ELMs using these models. It tries to explain various experimental observations related to the performance and ELM-behaviour of H-mode plasmas. Finally, it also tries to establish more generally the potential effects of ripple-induced thermal ion losses on H-mode plasma performance and ELMs. It is demonstrated that the proposed ELM modelling schemes can qualitatively reproduce the experimental dynamics of a number of ELM regimes. Using a theory-motivated ELM model based on a linear instability model, the dynamics of combined ballooning-peeling mode ELMs is studied. It is shown that the ELMs are most often triggered by a ballooning mode instability, which renders the plasma peeling mode unstable, causing the ELM to continue in a peeling mode phase. Understanding the dynamics of ELMs will be a key issue when it comes to controlling and mitigating the ELMs in future large tokamaks. By means of integrated modelling, it is shown that an experimentally observed increase in the ELM frequency and deterioration of plasma confinement triggered by external neutral gas puffing might be due to a transition from the second to
Short wavelength temperature gradient driven modes in tokamak plasmas
International Nuclear Information System (INIS)
Smolyakov, A.I.; Yagi, M.; Kishimoto, Y.; Sydora, R.
2003-01-01
A new temperature gradient driven instability in the short wavelength region k perpendicular 2 ρ i 2 > 1 is investigated. The mode is driven by the ion temperature gradient; it exists with adiabatic electrons but may be further enhanced by the non-adiabatic electron effects. In the slab plasma approximation, both local dispersion equation and non-local (differential equation) analysis indicate instability in the short wavelength region. In the toroidal case the mode is somewhat similar to the 'ubiquitous mode' but does not require trapped electrons. (author)
First-principle description of collisional gyrokinetic turbulence in tokamak plasmas
Energy Technology Data Exchange (ETDEWEB)
Dif-Pradalier, G
2008-10-15
This dissertation starts in chapter 1 with a comprehensive introduction to nuclear fusion, its basic physics, goals and means. It especially defines the concept of a fusion plasma and some of its essential physical properties. The following chapter 2 discusses some fundamental concepts of statistical physics. It introduces the kinetic and the fluid frameworks, compares them and highlights their respective strengths and limitations. The end of the chapter is dedicated to the fluid theory. It presents two new sets of closure relations for fluid equations which retain important pieces of physics, relevant in the weakly collisional tokamak regimes: collective resonances which lead to Landau damping and entropy production. Nonetheless, since the evolution of the turbulence is intrinsically nonlinear and deeply influenced by velocity space effects, a kinetic collisional description is most relevant. First focusing on the kinetic aspect, chapter 3 introduces the so-called gyrokinetic framework along with the numerical solver - the GYSELA code - which will be used throughout this dissertation. Very generically, code solving is an initial value problem. The impact on turbulent nonlinear evolution of out of equilibrium initial conditions is discussed while studying transient flows, self-organizing dynamics and memory effects due to initial conditions. This dissertation introduces an operational definition, now of routine use in the GYSELA code, for the initial state and concludes on the special importance of the accurate calculation of the radial electric field. The GYSELA framework is further extended in chapter 4 to describe Coulomb collisions. The implementation of a collision operator acting on the full distribution function is presented. Its successful confrontation to collisional theory (neoclassical theory) is also shown. GYSELA is now part of the few gyrokinetic codes which can self-consistently address the interplay between turbulence and collisions. While
First-principle description of collisional gyrokinetic turbulence in tokamak plasmas
International Nuclear Information System (INIS)
Dif-Pradalier, G.
2008-10-01
This dissertation starts in chapter 1 with a comprehensive introduction to nuclear fusion, its basic physics, goals and means. It especially defines the concept of a fusion plasma and some of its essential physical properties. The following chapter 2 discusses some fundamental concepts of statistical physics. It introduces the kinetic and the fluid frameworks, compares them and highlights their respective strengths and limitations. The end of the chapter is dedicated to the fluid theory. It presents two new sets of closure relations for fluid equations which retain important pieces of physics, relevant in the weakly collisional tokamak regimes: collective resonances which lead to Landau damping and entropy production. Nonetheless, since the evolution of the turbulence is intrinsically nonlinear and deeply influenced by velocity space effects, a kinetic collisional description is most relevant. First focusing on the kinetic aspect, chapter 3 introduces the so-called gyrokinetic framework along with the numerical solver - the GYSELA code - which will be used throughout this dissertation. Very generically, code solving is an initial value problem. The impact on turbulent nonlinear evolution of out of equilibrium initial conditions is discussed while studying transient flows, self-organizing dynamics and memory effects due to initial conditions. This dissertation introduces an operational definition, now of routine use in the GYSELA code, for the initial state and concludes on the special importance of the accurate calculation of the radial electric field. The GYSELA framework is further extended in chapter 4 to describe Coulomb collisions. The implementation of a collision operator acting on the full distribution function is presented. Its successful confrontation to collisional theory (neoclassical theory) is also shown. GYSELA is now part of the few gyrokinetic codes which can self-consistently address the interplay between turbulence and collisions. While
Hypersonic drift-tearing magnetic islands in tokamak plasmas
International Nuclear Information System (INIS)
Fitzpatrick, R.; Waelbroeck, F. L.
2007-01-01
A two-fluid theory of long wavelength, hypersonic, drift-tearing magnetic islands in low-collisionality, low-β plasmas possessing relatively weak magnetic shear is developed. The model assumes both slab geometry and cold ions, and neglects electron temperature and equilibrium current gradient effects. The problem is solved in three asymptotically matched regions. The 'inner region' contains the island. However, the island emits electrostatic drift-acoustic waves that propagate into the surrounding 'intermediate region', where they are absorbed by the plasma. Since the waves carry momentum, the inner region exerts a net force on the intermediate region, and vice versa, giving rise to strong velocity shear in the region immediately surrounding the island. The intermediate region is matched to the surrounding 'outer region', in which ideal magnetohydrodynamic holds. Isolated hypersonic islands propagate with a velocity that lies between those of the unperturbed local ion and electron fluids, but is much closer to the latter. The ion polarization current is stabilizing, and increases with increasing island width. Finally, the hypersonic branch of isolated island solutions ceases to exist above a certain critical island width. Hypersonic islands whose widths exceed the critical width are hypothesized to bifurcate to the so-called 'sonic' solution branch
International Nuclear Information System (INIS)
Kiviniemi, T.
2001-01-01
One of the principal problems en route to a fusion reactor is that of insufficient plasma confinement, which has lead to both theoretical and experimental research into transport processes in the parameter range relevant for fusion energy production. The neoclassical theory of tokamak transport is well-established unlike the theory of turbulence driven anomalous transport in which extensive progress has been made during last few years. So far, anomalous transport has been dominant in experiments, but transport may be reduced to the neoclassical level in advanced tokamak scenarios. This thesis reports a numerical study of neoclassical fluxes, parallel viscosity, and neoclassical radial current balance in tokamaks. Neoclassical parallel viscosity and particle fluxes are simulated over a wide range of collisionalities, using the fully kinetic five-dimensional neoclassical orbit-following Monte Carlo code ASCOT. The qualitative behavior of parallel viscosity derived in earlier analytic models is shown to be incorrect for high poloidal Mach numbers. This is because the poloidal dependence of density was neglected. However, in high Mach number regime, it is the convection and compression terms, rather than the parallel viscosity term, that are shown to dominate the momentum balance. For fluxes, a reasonable agreement between numerical and analytical results is found in the collisional parameter regime. Neoclassical particle fluxes are additionally studied in the banana regime using the three-dimensional Fokker-Planck code DEPORA, which solves the drift-kinetic equation with finite differencing. Limitations of the small inverse aspect ratio approximation adopted in the analytic theory are addressed. Assuming that the anomalous transport is ambipolar, the radial electric field and its shear at the tokamak plasma edge can be solved from the neoclassical radial current balance. This is performed both for JET and ASDEX Upgrade tokamaks using the ASCOT code. It is shown that
A computational model for the confinement and performance of circular and D-shaped Tokamak plasmas
International Nuclear Information System (INIS)
Nicolai, A.; Boerner, P.
1987-10-01
A combined one-dimensional and two-dimensional description of toroidal and axisymmetric plasmas is presented which is based essentially on an equilibrium solver resorting to the fast Buneman invertor and two one-dimensional transport codes describing the protium, deuterium, tritium, and plasma energy inventory and accounting for three impurity species; it is employed to compute the time evolution of Tokamak plasmas. The attempt was made to achieve a consistent modelling of the transport and equilibrium phenomena in a plasma which interacts with the peripheral devices for e.g. confinement, plasma heating and limitation of the plasma aperture. The equilibrium solver is connected to a coil submodule computing the poloidal field coil currents maintaining the designed plasma shape approximately. A surface current density standing for the magnetization of the iron core and the yokes is calculated by means of the module for the transformer iron. This module is linked to the equilibrium solver as well so that consistency between the coil currents, the plasma current distribution and the magnetization of the transformer iron is achieved. (orig./GG)
Internal helical modes with m > 1 in a tokamak with a small shear and high plasma pressure
International Nuclear Information System (INIS)
Mikha lovskij, A.B.; Aburdzhaniya, G.D.; Krymskij, A.M.
1979-01-01
Internal helical modes with m>1 in a circular cross-section tokamak with a small shear and large value of the parameter β (β is the ratio between the mean plasma pressure and the mean pressure of the poloidal magnetic field) are investigated. The equations obtained are used to study the destabilizing effects leading to helical instabilities. The role of destabilizing effects is regarded both in local and in a nonlocal approximations on the assumption that the radial plasma pressure is distributed parabolically and that the radial current distribution is also parabolic though slightly varying. It has been established that the profiling of current may lead to the tokamak plasma stability with respect to the modes under investigation. A tokamak with a small shear has been shown to be more stable relative to these modes than that with a large shear
International Nuclear Information System (INIS)
Hassanein, A.; Konkashbaev, I.
1999-01-01
Loss of plasma confinement causes surface and structural damage to plasma-facing materials (PFMs) and remains a major obstacle for tokamak reactors. The deposited plasma energy results in surface erosion and structural failure. The surface erosion consists of vaporization, spallation, and liquid splatter of metallic materials, while the structural damage includes large temperature increases in structural materials and at the interfaces between surface coatings and structural members. Comprehensive models (contained in the HEIGHTS computer simulation package) are being used self-consistently to evaluate material damage. Splashing mechanisms occur as a result of volume bubble boiling and liquid hydrodynamic instabilities and brittle destruction mechanisms of nonmelting materials. The effect of macroscopic erosion on total mass losses and lifetime is evaluated. The macroscopic erosion products may further protect PFMs from severe erosion (via the droplet-shielding effect) in a manner similar to that of the vapor shielding concept
New fluctuation phenomena in the H-mode regime of PDX tokamak plasmas
International Nuclear Information System (INIS)
Slusher, R.E.; Surko, C.M.; Valley, J.F.; Crowley, T.; Mazzucato, E.; McGuire, K.
1984-05-01
A new kind of quasi-coherent fluctuation is observed near the edge of plasmas in the PDX tokamak during H-mode operation. (The H-mode occurs in neutral beam heated divertor plasmas and is characterized by improved energy containment as well as large density and temperature gradients near the plasma edge.) These fluctuations are evidenced as VUV and density fluctuation bursts at well-defined frequencies (Δω/ω less than or equal to 0.1) in the frequency range between 50 and 180 kHz. They affect the edge temperature-density product, and therefore they may be important for understanding the relationship between the large edge density and temperature gradients and the improved energy confinement
International Nuclear Information System (INIS)
Kurihara, Kenichi
1997-11-01
Plasma current density distribution is one of the most important controlled variables to determine plasma performance of energy confinement and stability in a tokamak. However, its reproduction by using magnetic measurements solely is recognized to yield an ill-posed problem. A method to presume the formulas giving profiles of plasma pressure and current has been adopted to regularize the ill-posedness, and hence it has been reported the current density distribution can be reproduced as a solution of Grad-Shafranov equation within a certain accuracy. In order to investigate its strict reproducibility from magnetic measurements in this inverse problem, a new method of 'bounded-eigenfunction expansion' is introduced, and it was found that the reproducibility directly corresponds to the independence of a series of the special function. The results from various investigations in an aspect of applied mathematics concerning this inverse problem are presented in detail. (author)
Measurement of plasma current in Tokamaks using an optical fibre reflectometry technique
Directory of Open Access Journals (Sweden)
Wuilpart Marc
2018-01-01
Full Text Available An optical time-domain reflectometer sensitive to the polarization of light is proposed for the measurement of plasma current in the Tore Supra fusion reactor. The measurement principle relies on the Faraday effect i.e. on the generation of a circular birefringence along an optical fiber subject to an axial magnetic field. The circular birefringence induces a polarization rotation that can be mapped along the fiber thanks to an opticaltime domain reflectometer followed by an linear polarizer. A proper fitting of the measurement trace then allows determining the applied plasma current. The sensor has been experimentally validated on the Tore Supra tokamak fusion reactor for a plasma current range going from 0.6 to 1.5 MA. A maximum error of 13.50% has been observed for the lowest current.
Aspect Ratio Scaling of Ideal No-wall Stability Limits in High Bootstrap Fraction Tokamak Plasmas
International Nuclear Information System (INIS)
Menard, J.E.; Bell, M.G.; Bell, R.E.; Gates, D.A.; Kaye, S.M.; LeBlanc, B.P.; Maingi, R.; Sabbagh, S.A.; Soukhanovskii, V.; Stutman, D.
2003-01-01
Recent experiments in the low aspect ratio National Spherical Torus Experiment (NSTX) [M. Ono et al., Nucl. Fusion 40 (2000) 557] have achieved normalized beta values twice the conventional tokamak limit at low internal inductance and with significant bootstrap current. These experimental results have motivated a computational re-examination of the plasma aspect ratio dependence of ideal no-wall magnetohydrodynamic stability limits. These calculations find that the profile-optimized no-wall stability limit in high bootstrap fraction regimes is well described by a nearly aspect ratio invariant normalized beta parameter utilizing the total magnetic field energy density inside the plasma. However, the scaling of normalized beta with internal inductance is found to be strongly aspect ratio dependent at sufficiently low aspect ratio. These calculations and detailed stability analyses of experimental equilibria indicate that the nonrotating plasma no-wall stability limit has been exceeded by as much as 30% in NSTX in a high bootstrap fraction regime
The effect of LH wave on the peripheral plasma of TM-1-MH tokamak
International Nuclear Information System (INIS)
Badalec, J.; Datlov, J.; Jakubka, K.; Kopecky, V.; Koerbel, S.; Kryska, L.; Magula, P.; Stoeckel, J.; Zacek, F.; Nanobashvili, S.
1983-01-01
The effect of lower hybrid waves on the parameters of peripheral plasma in the TM-1-MH tokamak is investigated in close connection with a previous study of lower hybrid heating of the plasma core. Radial profiles of the saturated ion current are reconstructed from measurements using a movable Langmuir probe. The enhancement of the saturated ion current observed in a limiter shadow is interpreted as the heating of peripheral ions due to absorption of decay waves generated in this region as a result of the nonlinear wave-plasma interaction. Langmuir probe measurements found no increase in electron temperature or electron density due to direct local absorption of the pump wave. (J.U.)
Profile measurements in the plasma edge of mega amp spherical tokamak using a ball pen probe.
Walkden, N R; Adamek, J; Allan, S; Dudson, B D; Elmore, S; Fishpool, G; Harrison, J; Kirk, A; Komm, M
2015-02-01
The ball pen probe (BPP) technique is used successfully to make profile measurements of plasma potential, electron temperature, and radial electric field on the Mega Amp Spherical Tokamak. The potential profile measured by the BPP is shown to significantly differ from the floating potential both in polarity and profile shape. By combining the BPP potential and the floating potential, the electron temperature can be measured, which is compared with the Thomson scattering (TS) diagnostic. Excellent agreement between the two diagnostics is obtained when secondary electron emission is accounted for in the floating potential. From the BPP profile, an estimate of the radial electric field is extracted which is shown to be of the order ∼1 kV/m and increases with plasma current. Corrections to the BPP measurement, constrained by the TS comparison, introduce uncertainty into the ER measurements. The uncertainty is most significant in the electric field well inside the separatrix. The electric field is used to estimate toroidal and poloidal rotation velocities from E × B motion. This paper further demonstrates the ability of the ball pen probe to make valuable and important measurements in the boundary plasma of a tokamak.
Profile measurements in the plasma edge of mega amp spherical tokamak using a ball pen probe
Walkden, N. R.; Adamek, J.; Allan, S.; Dudson, B. D.; Elmore, S.; Fishpool, G.; Harrison, J.; Kirk, A.; Komm, M.
2015-02-01
The ball pen probe (BPP) technique is used successfully to make profile measurements of plasma potential, electron temperature, and radial electric field on the Mega Amp Spherical Tokamak. The potential profile measured by the BPP is shown to significantly differ from the floating potential both in polarity and profile shape. By combining the BPP potential and the floating potential, the electron temperature can be measured, which is compared with the Thomson scattering (TS) diagnostic. Excellent agreement between the two diagnostics is obtained when secondary electron emission is accounted for in the floating potential. From the BPP profile, an estimate of the radial electric field is extracted which is shown to be of the order ˜1 kV/m and increases with plasma current. Corrections to the BPP measurement, constrained by the TS comparison, introduce uncertainty into the ER measurements. The uncertainty is most significant in the electric field well inside the separatrix. The electric field is used to estimate toroidal and poloidal rotation velocities from E × B motion. This paper further demonstrates the ability of the ball pen probe to make valuable and important measurements in the boundary plasma of a tokamak.
Profile measurements in the plasma edge of mega amp spherical tokamak using a ball pen probe
International Nuclear Information System (INIS)
Walkden, N. R.; Adamek, J.; Komm, M.; Allan, S.; Elmore, S.; Fishpool, G.; Harrison, J.; Kirk, A.; Dudson, B. D.
2015-01-01
The ball pen probe (BPP) technique is used successfully to make profile measurements of plasma potential, electron temperature, and radial electric field on the Mega Amp Spherical Tokamak. The potential profile measured by the BPP is shown to significantly differ from the floating potential both in polarity and profile shape. By combining the BPP potential and the floating potential, the electron temperature can be measured, which is compared with the Thomson scattering (TS) diagnostic. Excellent agreement between the two diagnostics is obtained when secondary electron emission is accounted for in the floating potential. From the BPP profile, an estimate of the radial electric field is extracted which is shown to be of the order ∼1 kV/m and increases with plasma current. Corrections to the BPP measurement, constrained by the TS comparison, introduce uncertainty into the E R measurements. The uncertainty is most significant in the electric field well inside the separatrix. The electric field is used to estimate toroidal and poloidal rotation velocities from E × B motion. This paper further demonstrates the ability of the ball pen probe to make valuable and important measurements in the boundary plasma of a tokamak
Pitch-angle scattering driven by a single wave in Tokamak plasma
International Nuclear Information System (INIS)
Qiu Yunqing; Xia Mengfen
1988-01-01
The interaction of particles with a single wave in a Tokamak plasma is investigated. It is pointed out that the stochastic pitch-angle scattering across the trapped/passing boundary may be driven by a single wave. The characteristics of such separatrix crossings are discussed. It is also found that the wave-driven separatrix crossings are accompanied by a radial flow of particles, which is composed of a directional flow and a diffusional flow. The resultant pitch-angle and radial fluxes are calculated. (author)
Kinetic theory and simulation of multi-species plasmas in tokamaks excited with ICRF microwaves
Energy Technology Data Exchange (ETDEWEB)
Kerbel, G.D.; McCoy, M.G.
1984-12-21
This paper presents a description of a bounce-averaged Fokker-Planck quasilinear model for the kinetic description of tokamak plasmas. The non-linear collision and quasilinear resonant diffusion operators are represented in a form conducive to numerical solution with specific attention to the treatment of the boundary layer separating trapped and passing orbit regions of velocity space. The numerical techniques employed are detailed in so far as they constitute significant departure from those used in the conventional uniform magnetic field case. Examples are given to illustrate the combined effects of collisional and resonant diffusion.
Multi-machine scaling of the main SOL parallel heat flux width in tokamak limiter plasmas
Czech Academy of Sciences Publication Activity Database
Horáček, Jan; Pitts, R.A.; Adámek, Jiří; Arnoux, G.; Bak, J.-G.; Brezinsek, S.; Dimitrova, Miglena; Goldston, R.J.; Gunn, J. P.; Havlíček, Josef; Hong, S.-H.; Janky, Filip; LaBombard, B.; Marsen, S.; Maddaluno, G.; Nie, L.; Pericoli, V.; Popov, Tsv.; Pánek, Radomír; Rudakov, D.; Seidl, Jakub; Seo, D.S.; Shimada, M.; Silva, C.; Stangeby, P.C.; Viola, B.; Vondráček, Petr; Wang, H.; Xu, G.S.; Xu, Y.
2016-01-01
Roč. 58, č. 7 (2016), č. článku 074005. ISSN 0741-3335 R&D Projects: GA ČR(CZ) GAP205/12/2327; GA ČR(CZ) GA15-10723S; GA MŠk(CZ) LM2011021 EU Projects: European Commission(XE) 633053 - EUROfusion Institutional support: RVO:61389021 Keywords : tokamak * ITER * SOL decay length * SOL width * scaling Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 2.392, year: 2016 http://iopscience.iop.org/article/10.1088/0741-3335/58/7/074005
Kinetic modelling of plasma near the neutralizer plate in a tokamak divertor
International Nuclear Information System (INIS)
Abou-Assaleh, Z.; Marchand, R.; Matte, J.P.; Johnston, T.W.; Parbhakar, K.J.
1990-01-01
An electron kinetic code is used to simulate longitudinal transport and recycling near the neutralizer plate in a divertor plasma. In addition to the standard features, such as electron-electron and electron-ion Coulomb collisions, transport, ion motion, and a self-consistent electric field, the code now accounts for ionization, excitation, and recycling of hydrogen near the plate. Ions and neutrals are treated as fluids. The kinetic results are compared with those of a one-dimensional, two-temperature fluid code. Some implications of these results for recycling and impurity control in tokamaks are also discussed
Rotation characteristics of main ions and impurity ions in H-mode tokamak plasma
International Nuclear Information System (INIS)
Kim, J.; Burrell, K.H.; Gohil, P.; Groebner, R.J.; Kim, Y.; St. John, H.E.; Seraydarian, R.P.; Wade, M.R.
1994-01-01
Poloidal and toroidal rotation of the main ions (He 2+ ) and the impurity ions (C 6+ and B 5+ ) in H-mode helium plasmas have been measured via charge exchange recombination spectroscopy in the DIII-D tokamak. It was discovered that the main ion poloidal rotation is in the ion diamagnetic drift direction while the impurity ion rotation is in the electron diamagnetic drift direction, in qualitative agreement with the neoclassical theory. The deduced radial electric field in the edge is of the same negative-well shape regardless of which ion species is used, validating the fundamental nature of the electric field in L-H transition phenomenology
The effect of ion drifts on the properties of the tokamak scrape-off plasma
International Nuclear Information System (INIS)
Petravic, M.; Kuo-Petravic, G.
1988-09-01
A plasma fluid model which takes into account ion drifts has been constructed and applied to the scrape-off layer of a tokamak with a poloidal divertor. This model predicts near-sonic toroidal velocities and large poloidal flows in most of the scrapeoff together with steep gradients in the pressure and electrostatic potential along the magnetic field near the X-point, contrary to the predictions of the standard model. The potential step at X-point should reduce parallel heat transport and could act as an H-mode trigger. 12 refs., 4 figs
Bifurcations of axisymmetric plasma equilibrium in a tokamak
Energy Technology Data Exchange (ETDEWEB)
Skovoroda, A. A., E-mail: skovoroda-aa@nrcki.ru [National Research Centre Kurchatov Institute (Russian Federation)
2016-05-15
Bifurcation of solutions to the Grad–Shafranov-type equation for helically symmetric plasma near the threshold for tearing instability are analyzed. Quadratic and cubic nonlinearities were added to the linear dependence of the current density on the helical flux. Depending on the character of nonlinearity, two types of bifurcation can be observed, the “small” and the “large” ones. The small bifurcation is typical of cubic nonlinearity and reveals itself in the growth of the magnetic island from zero as the profile parameter increases above the instability threshold. The large bifurcation is typical of quadratic nonlinearity and causes jumplike formation of a large-scale magnetic island upon exceeding the instability threshold. As the profile parameter decreases below the instability threshold, the large-scale island continues to persist for some time (the hysteresis effect) and then suddenly disappears.
Relaxation oscillations and transport barrier dynamics in tokamak edge plasmas
International Nuclear Information System (INIS)
Benkadda, Sadruddin; Beyer, Peter; Fuhr-Chaudier, Guillaume; Garbet, Xavier; Ghendrih, Philippe; Sarazin, Yanick
2004-01-01
Oscillations of turbulent transport of particles and energy in magnetically confined plasmas can be easily observed in simulations of a variety of turbulence models. These oscillations typically involve a mechanism of energy exchange between fluctuations and a poloidal shear flow. This kind of ''predator-prey'' mechanism is found to be not relevant for transport barrier relaxations. In RBM simulations of resistive ballooning turbulence with transport barrier, relaxation oscillations of the latter are observed even in the case of frozen poloidal shear flow. These relaxations are due to a transitory growth of a mode localized at the barrier center. A one-dimensional model for the evolution of such a mode in the presence of a shear flow describes a transitory growth of an initial perturbation. Oscillations in the case of a finite steady-state shear flow are possible due to the coupling of the mode to the dynamics of the pressure profile. (author)
International Nuclear Information System (INIS)
Sarakovskis, A.; Gromuls, I.; Tale, I.
2004-01-01
Full text: Evaluation of the absolute concentration of the impurity metal vapors in plasma using emission spectroscopy requires development of the principles and procedure of in situ calibration of equipment. Several approaches can be used for calibration of the equipment. In the case the emission rate of single metal atom under ionizing conditions is known, the calibration of the spectroscopic equipment reduces to the calibration in radiometric units (irradiance). For unknown emission rate the routine calibration procedure involves use of the set of etalons of material under investigation with known concentration of impurity metal. For evaluation of impurity concentration in plasma it is necessary to develop a corresponding plasma source having certain plasma parameters - temperature and concentration of electrons and metal vapors in concentration, which can be measured independent procedure. Present report deals with problems of estimation of Ga impurity concentration in ISSTOK ( Portugal) tokamak plasma using decay data of atom emission lines. Emission spectra of Ga atoms show that collisions with hydrogen electrons and ions results in ionization of Ga followed by multi step radiative recombination. The main emission lines corresponds to the capture of electron to the 4s 2 5p (639 nm), transition 4s 2 5p - 4s 2 5s (1,211 μm ); and transition to the ground state 4s 2 5s - 4s 2 4p (403 nm). Some of the excited state lifetimes obtained from decay kinetics are reported. Analysis of emission line intensity ratios together with lifetime data will allow elaborate the procedure for evaluation of Ga impurity concentration in the tokamak plasma
Energy Technology Data Exchange (ETDEWEB)
Depret, G
1999-11-15
The purpose of this work is the design of a Vlasov code dedicated to the instability of trapped ions. Numerical simulations are useful in plasma physics, they allow physicists to refine theory and to optimize experiments. In the first part, we develop a model for trapped ions through the description of the magnetic confinement in tokamaks and the trajectories of charged particles. We get a consistent system composed of a gyro-kinetic equation and of an electro-neutrality relation. We have deduced a relation of linear dispersion that have given us access to the growth rate of the instability. Numerical methods used in plasma physics are numerous, we begin the second part by reviewing them. We have developed a new method called 'semi-Lagrangian' method that solves directly the Vlasov equation by integrating the function along its characteristics. Like the Lagrangian method, this new method is not sensitive to CFL (Courant, Friederich, Levy) conditions and like the Eulerian method, it uses a fix grid in the phase space. The semi-Lagrangian method is applied to the gyro-kinetic equation and it is showed that this method presents interesting aptitudes to parallelism. In the third part we compare the theoretical predictions of the model with simulations obtained near the instability threshold, it appears that the growth rates of the instability given by the simulations are very similar to those given by our model. (A.C.)
International Nuclear Information System (INIS)
Furth, H.P.
1984-10-01
The economic prospects of the tokamak are reviewed briefly and found to be favorable - if the size of ignited tokamak plasmas can be kept small and appropriate auxiliary systems can be developed. The main objectives of the Princeton Plasma Physics Laboratory tokamak program are: (1) exploration of the physics of high-temperature toroidal confinement, in TFTR; (2) maximization of the tokamak beta value, in PBX; (3) development of reactor-relevant rf techniques, in PLT
Advanced antenna system for Alfven wave plasma heating and current drive in TCABR tokamak
International Nuclear Information System (INIS)
Ruchko, L.F.; Ozono, E.; Galvao, R.M.O.; Nascimento, I.C.; Degasperi, F.T.; Lerche, E.
1998-01-01
An advanced antenna system that has been developed for investigation of Alfven wave plasma heating and current drive in the TCABR tokamak is described. The main goal was the development of such a system that could insure the excitation of travelling single helicity modes with predefined wave mode numbers M and N. The system consists of four similar modules with poloidal windings. The required spatial spectrum is formed by proper phasing of the RF feeding currents. The impedance matching of the antenna with the four-phase oscillator is accomplished by resonant circuits which form one assembly unit with the RF feeders. The characteristics of the antenna system design with respect to the antenna-plasma coupling and plasma wave excitation, for different phasing of the feeding currents, are summarised. The antenna complex impedance Z=Z R +Z I is calculated taking into account both the plasma response to resonant excitation of fast Alfven waves and the nonresonant excitation of vacuum magnetic fields in conducting shell. The matching of the RF generator with the antenna system during plasma heating is simulated numerically, modelling the plasma response with mutually coupled effective inductances with corresponding active Z R and reactive Z I impedances. The results of the numerical simulation of the RF system performance, including both the RF magnetic field spectrum analysis and the modeling of the RF generator operation with plasma load, are presented. (orig.)
Czech Academy of Sciences Publication Activity Database
Hron, Martin; Ďuran, Ivan; Stöckel, Jan; Hidalgo, C.
2004-01-01
Roč. 54, suppl. C (2004), C22-C27 ISSN 0011-4626. [Symposium on Plasma Physics and Technology /21st/. Praha, 14.06.2004-17.06.2004] R&D Projects: GA ČR GA202/03/0786 Institutional research plan: CEZ:AV0Z2043910 Keywords : tokamak, edge plasma, polarization Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 0.292, year: 2004
Czech Academy of Sciences Publication Activity Database
Aftanas, Milan; Böhm, Petr; Bílková, Petra; Weinzettl, Vladimír; Zajac, Jaromír; Žáček, František; Stöckel, Jan; Hron, Martin; Pánek, Radomír; Scannell, R.; Walsh, M.
2012-01-01
Roč. 83, č. 10 (2012), 10E350-10E350 ISSN 0034-6748. [Topical Conference High-Temperature Plasma Diagnostics/19./. Monte rey, 06.05.2012-10.05.2012] R&D Projects: GA ČR GA202/09/1467; GA MŠk 7G10072 Institutional research plan: CEZ:AV0Z20430508 Keywords : error analysis * Monte Carlo method s * plasma density * plasma diagnostics * plasma temperature * plasma toroidal confinement * Tokamak devices Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 1.602, year: 2012 http://dx.doi.org/10.1063/1.4743956
Pellet-plasma interaction: Local disturbances caused by pellet ablation in tokamaks
International Nuclear Information System (INIS)
Lengyel, L.L.
1989-01-01
The local disturbance amplitudes caused by ablating pellets in tokamaks are computed in the framework of a magnetohydrodynamic model supplemented by the neutral gas plasma shielding ablation model. The model computes, for a given number of pellet particles locally deposited, the time histories of the ablatant cloud parameters, such as cloud radius, cloud length, electron density, temperature and cloud beta, at a succession of magnetic flux surfaces. The cloud radius thus determined may be fed back into the ablation model, thus adjusting the effect of the shielding cloud on the ablation rate. The model is applied to typical plasma parameter ranges of existing and planned tokamaks. The results show that the ablating pellets may cause massive local disturbances in tokamaks, depending upon the number of particles locally deposited. The peaks of these disturbances are of a spike nature, lasting only a few microseconds (Alfven time-scale). The characteristic decay time of the 'quasi-steady' disturbance values that characterize the after-spike period is of the order of several milliseconds (hydrodynamic time-scale). The peak electron density values may be as high as 10 23 to 10 25 m -3 , with the associated beta peaks exceeding unity. The 'quasi-steady' values of the electron density and the ablatant beta may be of the order of 10 22 to 10 24 m -3 and unity, respectively. Furthermore, the results show the strong dependence of the ablation rate on the dynamic characteristics of the ablatant cloud surrounding the pellet. (author). 25 refs, 6 figs, 2 tabs
Time-of-flight measurements of the plasma density in the T-11M tokamak
International Nuclear Information System (INIS)
Petrov, V. G.; Petrov, A. A.; Malyshev, A. Yu.; Markov, V. K.; Babarykin, A. V.
2006-01-01
The average plasma density in the T-11M tokamak is determined by means of an O-mode time-of-flight refractometer measuring the propagation time τ of microwave pulses through the plasma. Since the front duration τ fr of these pulses is shorter than 2 ns, filtering the measured signal cannot reduce the signal-to-noise ratio below a certain level. This circumstance impedes the use of this diagnostics in larger devices, where the signals may be substantially attenuated because of the larger chamber size and larger waveguide losses. There are several ways to overcome these difficulties: to raise the microwave power, to increase the sensitivity of the receivers, etc. In this paper, a technique is described that is based on the differential method for determining the propagation time of a microwave signal through the plasma. In this method, the plasma is probed by two continuous microwaves with close frequencies and the phase difference between them Δφ 12 is measured. As long as the condition Δφ 12 < 2π is satisfied, the measurements are unambiguous, because there are no phase jumps by a value multiple of 2π, as is usually the case in conventional interferometers at an increased level of MHD activity, in regimes with a rapid density growth, etc. This method allows the signal to be filtered, thereby ensuring an appreciable improvement in the signal-to-noise ratio in comparison with the pulsed methods. The first measurements of the average density along the +3-cm chord were performed with the help of this new differential time-of-flight refractometer in the T-11M tokamak. The refractometry data agree well with the interferometric data and are used to recover the plasma-density profile
THREE-DIMENSIONAL EFFECTS OF ELECTROMAGNETIC FIELDS IN TOKAMAK PLASMAS
Minucci, Simone
2015-01-01
The problem of the energy harvesting to face the more and more increasing energy demand is currently challenging. The higher part of our electrical energy (about 80%) is produced by thermoelectrical power plants, which exploit the so-called Non-renewable energy resources (e.g. oil and gas), whose re-growth rate lasts millions of years and are so to be considered as in a fixed amount. On the other hand, the Renewable energy resources are not reduced by their exploitation. For instance, sola...
Modeling of the equilibrium of a tokamak plasma; Modelisation de l'equilibre d'un plasma de tokamak
Energy Technology Data Exchange (ETDEWEB)
Grandgirard, V
1999-12-01
The simulation and the control of a plasma discharge in a tokamak require an efficient and accurate solving of the equilibrium because this equilibrium needs to be calculated again every microsecond to simulate discharges that can last up to 1000 seconds. The purpose of this thesis is to propose numerical methods in order to calculate these equilibrium with acceptable computer time and memory size. Chapter 1 deals with hydrodynamics equation and sets up the problem. Chapter 2 gives a method to take into account the boundary conditions. Chapter 3 is dedicated to the optimization of the inversion of the system matrix. This matrix being quasi-symmetric, the Woodbury method combined with Cholesky method has been used. This direct method has been compared with 2 iterative methods: GMRES (generalized minimal residual) and BCG (bi-conjugate gradient). The 2 last chapters study the control of the plasma equilibrium, this work is presented in the formalism of the optimized control of distributed systems and leads to non-linear equations of state and quadratic functionals that are solved numerically by a quadratic sequential method. This method is based on the replacement of the initial problem with a series of control problems involving linear equations of state. (A.C.)
Energy Technology Data Exchange (ETDEWEB)
Sarazin, Y
1997-11-21
The aim of this work is to propose a new frame to study turbulent transport in plasmas. In order to avoid the restraint of scale separability the forcing by flux is used. A critical one-dimension self-organized cellular model is developed. In keeping with experience the average transport can be described by means of diffusion and convection terms whereas the local transport could not. The instability due to interchanging process is thoroughly studied and some simplified equations are derived. The proposed model agrees with the following experimental results: the relative fluctuations of density are maximized on the edge, the profile shows an exponential behaviour and the amplitude of density fluctuations depends on ionization source strongly. (A.C.) 103 refs.
A novel technique for the measurement of plasma displacement in IR-T1 tokamak
International Nuclear Information System (INIS)
Salar Elahi, A.; Ghoranneviss, M.
2010-01-01
In this paper we present a novel technique based on poloidal magnetic flux for determination of plasma displacement in IR-T1 tokamak. This instrument consists of a two semicircle wires which installed toroidally on inner and outer sides of tokamak chamber and connected with each other. In order to receive the poloidal flux on Last Closed Flux Surface (LCFS); this instrument installed on polar coordinate so as projection of it on midplane lie on LCFS. Really, this instrument receives the difference between poloidal flux on inner and outer sides of LCFS, which we needed in calculating of the Shafranov shift. Main benefits of our proposed instrument are that it is a simple, solid, and also its output is directly related to the Shafranov shift. Based on this technique we determined the plasma position and to compare the result obtained using this method, multipole moments method is also experimented on IR-T1. Results of the two techniques are in good agreement with each other.
Electrostatic potential generated by perpendicular neutral-beam injection to a tokamak plasma
Yamaguchi, H.; Murakami, S.
2018-01-01
The electrostatic potential generated by neutral-beam-injection (NBI) heating in a tokamak plasma is investigated using numerical simulations. The density distribution of the NBI fast ions in an assumed tokamak is evaluated using the GNET drift-kinetic-equation solver which is based on the Monte Carlo method. The electrostatic potential is evaluated assuming an adiabatic response of the electrons to the fast-ion density distribution in the plasma. It is found that an electrostatic potential peak is generated near the beam-injection point owing to the trapped fast ions satisfying the zero-precession condition. An analytic model expressing the expected potential except for the peak is derived and shows a good agreement with the radial distribution and linear dependence on the electron temperature predicted by the simulation within a factor of 1–2. The existence of three-dimensional electrostatic trapping may break the poloidally-closed particle orbits, and may change the spatial distribution and transport of high-Z impurity ions.
2D full-wave simulation of waves in space and tokamak plasmas
Directory of Open Access Journals (Sweden)
Kim Eun-Hwa
2017-01-01
Full Text Available Simulation results using a 2D full-wave code (FW2D for space and NSTX fusion plasmas are presented. The FW2D code solves the cold plasma wave equations using the finite element method. The wave code has been successfully applied to describe low frequency waves in planetary magnetospheres (i.e., dipole geometry and the results include generation and propagation of externally driven ultra-low frequency waves via mode conversion at Mercury and mode coupling, refraction and reflection of internally driven field-aligned propagating left-handed electromagnetic ion cyclotron (EMIC waves at Earth. In this paper, global structure of linearly polarized EMIC waves is examined and the result shows such resonant wave modes can be localized near the equatorial plane. We also adopt the FW2D code to tokamak geometry and examine radio frequency (RF waves in the scape-off layer (SOL of tokamaks. By adopting the rectangular and limiter boundary, we compare the results with existing AORSA simulations. The FW2D code results for the high harmonic fast wave heating case on NSTX with a rectangular vessel boundary shows excellent agreement with the AORSA code.
2D full-wave simulation of waves in space and tokamak plasmas
Kim, Eun-Hwa; Bertelli, Nicola; Johnson, Jay; Valeo, Ernest; Hosea, Joel
2017-10-01
Simulation results using a 2D full-wave code (FW2D) for space and NSTX fusion plasmas are presented. The FW2D code solves the cold plasma wave equations using the finite element method. The wave code has been successfully applied to describe low frequency waves in planetary magnetospheres (i.e., dipole geometry) and the results include generation and propagation of externally driven ultra-low frequency waves via mode conversion at Mercury and mode coupling, refraction and reflection of internally driven field-aligned propagating left-handed electromagnetic ion cyclotron (EMIC) waves at Earth. In this paper, global structure of linearly polarized EMIC waves is examined and the result shows such resonant wave modes can be localized near the equatorial plane. We also adopt the FW2D code to tokamak geometry and examine radio frequency (RF) waves in the scape-off layer (SOL) of tokamaks. By adopting the rectangular and limiter boundary, we compare the results with existing AORSA simulations. The FW2D code results for the high harmonic fast wave heating case on NSTX with a rectangular vessel boundary shows excellent agreement with the AORSA code.
Plasma core electron density and temperature measurements using CVI line emissions in TCABR Tokamak
Energy Technology Data Exchange (ETDEWEB)
Nascimento, F. do, E-mail: fellypen@ifi.unicamp.br [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Centro de Componentes Semicondutores; Machida, M. [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Instituto de Fisica Gleb Wataghin; Severo, J.H.F.; Sanada, E.; Ronchi, G. [Universidade de Sao Paulo (USP), SP (Brazil). Instituto de Fisica
2015-08-15
In this work, we present results of electron temperature (T{sub e} ) and density (n {sub e} ) measurements obtained in Tokamak Chauffage Alfven Bresilien (TCABR) tokamak using visible spectroscopy from CVI line emissions which occurs mainly near the center of the plasma column. The presented method is based on a well-known relationship between the particle flux (Γ {sub ion}) and the photon flux (ø {sub ion}) emitted by an ion species combined with ionizations per photon atomic data provided by the atomic data and analysis structure (ADAS) database. In the experiment, we measured the photon fluxes of three different CVI spectral line emissions, 4685.2, 5290.5, and 6200.6 Å (one line per shot). Using this method it was possible to find out the temporal evolution of T{sub e} and n{sub e} in the plasma. The results achieved are in good agreement with T{sub e} and n{sub e} measurements made using other diagnostic tools. (author)
International Nuclear Information System (INIS)
Cottier, Pierre
2013-01-01
The magnetic confinement in tokamaks is for now the most advanced way towards energy production by nuclear fusion. Both theoretical and experimental studies showed that rotation generation can increase its performance by reducing the turbulent transport in tokamak plasmas. The rotation influence on the heat and particle fluxes is studied along with the angular momentum transport with the quasi-linear gyro-kinetic eigenvalue code QuaLiKiz. For this purpose, the QuaLiKiz code is modified in order to take the plasma rotation into account and compute the angular momentum flux. It is shown that QuaLiKiz framework is able to correctly predict the angular momentum flux including the E*B shear induced residual stress as well as the influence of rotation on the heat and particle fluxes. The major approximations of QuaLiKiz formalisms are reviewed, in particular the ballooning representation at its lowest order and the eigenfunctions calculated in the hydrodynamic limit. The construction of the quasi-linear fluxes is also reviewed in details and the quasi-linear angular momentum flux is derived. The different contributions to the turbulent momentum flux are studied and successfully compared both against non-linear gyro-kinetic simulations and experimental data. (author) [fr
International Nuclear Information System (INIS)
Peng, Y.K.M.; Attenberger, S.E.; Houlberg, W.A.; Mense, A.T.; Rome, J.A.; Uckan, N.A.
1977-12-01
Recent plasma engineering studies have ascertained a viable concept for The Next Step (TNS) reactor based on medium toroidal fields between 4 T and 7 T at the plasma center, plasma anti β values up to 10%, and averaged densities between 0.6 x 10 14 cm -3 and 2.5 x 10 14 cm -3 . Plasma engineering innovations that can substantially reduce the size, cost, and complexity of the TNS reactor have been explored and are summarized. It is shown that the previously anticipated requirement of high pellet velocities can be substantially reduced; the toroidal field (TF) ripple requirements may be relaxed to reduce the number of TF coils and improve machine access; hybrid equilibrium field (EF) coils have been shown to require building only small interior coils and to reduce the power supply required by the exterior coils; proper approaches of microwave plasma preheating may reduce the peak loop voltage for start-up by an order of magnitude. The medium-field TNS reactor concepts and the plasma engineering innovations discussed should be applicable to other designs of tokamak reactors; some of the suggested innovations will be tested in upcoming experiments
Linking PFC surface characteristics and plasma performance in the Lithium Tokamak Experiment
Lucia, M.; Kaita, R.; Majeski, R.; Boyle, D. P.; Jaworski, M. A.; Schmitt, J. C.; Bedoya, F.; Allain, J. P.
2015-11-01
The Lithium Tokamak Experiment (LTX) is a spherical torus magnetic confinement device designed to accommodate lithium as the primary plasma-facing component (PFC). Results are presented from the implementation on LTX of the Materials Analysis and Particle Probe (MAPP), a compact in vacuo surface science diagnostic. With MAPP, in situ surface analysis techniques of x-ray photoelectron spectroscopy and thermal desorption spectroscopy are used to study evolution of the PFC surface chemistry in LTX as a function of varied lithium coating, hydrogen plasma exposure, and PFC surface temperature (20 - 300°C). Surface analysis results are then correlated with various measures of LTX plasma performance, including toroidal plasma current, line-integrated plasma density, and density-normalized impurity emission. Lithium coatings are observed to convert within hours to Li2O by gettering oxygen from both the residual vacuum and the PFC substrate. However, plasma performance remains elevated even with discharges operating against Li2O -coated PFCs. Hydrogen is retained by these Li2O coatings during a discharge, but it is almost completely desorbed as outgassed H2 in the minutes following the discharge; no persistent LiH formation is observed. This work was supported by U.S. DOE contracts DE-AC02-09CH11466, DE-AC52-07NA27344, and DE-SC0010717, as well as by an NSF GRFP fellowship under grant DGE-0646086.
MHD stability analyses of a tokamak plasma by time-dependent codes
International Nuclear Information System (INIS)
Kurita, Gen-ichi
1982-07-01
The MHD properties of a tokamak plasma are investigated by using time evolutional codes. As for the ideal MHD modes we have analyzed the external modes including the positional instability. Linear and nonlinear ideal MHD codes have been developed. Effects of the toroidicity and conducting shell on the external kink mode are studied minutely by the linear code. A new rezoning algorithm is devised and it is successfully applied to express numerically the axisymmetric plasma perturbation in a cylindrical geometry. As for the resistive MHD modes we have developed nonlinear codes on the basis of the reduced set of the resistive MHD equations. By using the codes we have studied the major disruption processes and properties of the low n resistive modes. We have found that the effects of toroidicity and finite poloidal beta are very important. Considering the above conclusion we propose a new scenario of the initiation of the major disruption. (author)
Initial confinement studies of ohmically heated plasmas in the Tokamak Fusion Test Reactor
International Nuclear Information System (INIS)
Efthimion, P.C.; Bell, M.; Blanchard, W.R.
1984-06-01
Initial operation of the Tokamak Fusion Test Reactor (TFTR) has concentrated upon confinement studies of ohmically heated hydrogen and deuterium plasmas. Total energy confinement times (tau/sub E/) are 0.1 to 0.2 s for a line-average density range (anti n/sub e/) of 1 to 2.5 x 10 19 m -3 with electron temperatures of T/sub e/(o) approx. 1.2 to 2.2 keV, ion temperatures of T/sub i/(o) approx. 0.9 to 1.5 keV, and Z/sub eff/ approx. 3. A comparison of PLT, PDX, and TFTR plasma confinement supports a dimension-cubed scaling law
Poloidal rotation driven by electron cyclotron resonance wave in tokamak plasmas
Directory of Open Access Journals (Sweden)
Qing Zhou
2017-10-01
Full Text Available The poloidal electric filed, which is the drive field of poloidal rotation, has been observed and increases obviously after the injection of electron cyclotron resonance wave in HL-2A experiment, and the amplitude of the poloidal electric field is in the order of 103 V/m. Through theoretical analysis using Stringer rotation model, the observed poloidal electric field is of the same order as the theoretical calculation value. In addition, the magnetic pump damping which would damp the poloidal rotation is calculated numerically and the calculation results show that the closer to the core plasmas, the stronger the magnetic pump damping will be. Meanwhile, according to the value of the calculated magnetic pump damping, the threshold of the poloidal electric field which could overcome magnetic pump damping and drive poloidal rotation in tokamak plasmas is given out. Finally, the poloidal rotation velocity over time at different minor radius is studied theoretically.
Resonance parallel viscosity in the banana regime in poloidally rotating tokamak plasmas
International Nuclear Information System (INIS)
Shaing, K.C.; Hsu, C.T.; Dominguez, N.
1994-01-01
Parallel viscosity in the banana regime in a poloidally (ExB) rotating tokamak plasma is calculated to include the effects of orbit squeezing and to allow the poloidal ExB Mach number M p to have a value of order unity. Here, E is the electric field and B is the magnetic field. The effects of orbit squeezing not only modify the size of the particle orbit, but also change the fraction of poloidally trapped particles. Resonance between the particle parallel (to B) speed u and the poloidal component of the ExB velocity can only occur for those particles with energy (v/v t ) 2 >M 2 p (with v the particle speed and v t the thermal speed). Thus, the resonance parallel plasma viscosity in the banana regime decreases exponentially with M 2 p when M 2 p ≥1, and has a local maximum of M 2 p ∼1
On the energy confinement in the TM-G tokamak with high plasma density
International Nuclear Information System (INIS)
Stefanovskij, A.M.
1986-01-01
Energy confinement time τ E , when plasma density changing, has been measured at the TM-G-tokamak device with a graphite discharge chamber. The measurements have been carried out in three different discharge modes with a similar stability margin on the limiter (q L )=3) and with different values of the discharge current of a longitudinal field (I p =20, 40 and 60 kA, V T =0.8; 1.6 and 2.4 T). On the basis of experimental data analysis the conclusion is made that saturation of τ E (n e ) dependence at high plasma density occurs due to current channel compression and violation of a ''self-consistent'' profile of current density. Drift wave excitation at densities similar to the limiting Murakami density can also play an important role
Feedback stabilization of the axisymmetric instability of a deformable tokamak plasma
International Nuclear Information System (INIS)
Pomphrey, N.; Jardin, S.C.
1987-09-01
We analyze the magnetohydrodynamic (MHD) stability of the axisymmetric system consisting of a free boundary, non-circular cross-section tokamak plasma, finite resistivity passive conductors, and an active feedback system with magnetic flux pickup loops, a proportional amplifier with gain G, and current carrying poloidal field coils. Numerical simulation of a system that is unstable with G = 0 shows that for some placements of the pickup loops, the system will remain unstable for all values of G, while for other placements of the loops, the system will be stable for G > G/sub crit/. This behavior is explained by analysis using an extended energy principle, and it is shown to result from the deformability of the plasma cross section. 9 refs., 5 figs
Prediction of Pressure and Temperature Gradients in the Tokamak Plasma Edge
Stacey, W. M.
2017-10-01
An extended plasma fluid theory that takes into account kinetic ion orbit loss and electromagnetic forces in the continuity, momentum and energy balances, as well as atomic physics and radiation, has been used to reveal the explicit dependence of the temperature and pressure gradients in the tokamak edge plasma on these various factors. Combining the ion radial momentum balance and the Ohm's Law expression for Er reveals the dependence of the radial ion pressure gradient on VxB forces driven by radial particle fluxes, which depend on ion orbit loss, and other factors. The strong temperature gradients measured in the H-mode edge pedestal could certainly be associated with radiative and atomic physics edge cooling effects and the strong reduction in ion and energy fluxes due to ion orbit loss, as well as to the possible reductions in thermal diffusivities that is usually assumed to be the cause. Work supported by USDOE under DE-FC02-04ER54698.
Majeski, R.; Bell, R. E.; Boyle, D. P.; Kaita, R.; Kozub, T.; LeBlanc, B. P.; Lucia, M.; Maingi, R.; Merino, E.; Raitses, Y.; Schmitt, J. C.; Allain, J. P.; Bedoya, F.; Bialek, J.; Biewer, T. M.; Canik, J. M.; Buzi, L.; Koel, B. E.; Patino, M. I.; Capece, A. M.; Hansen, C.; Jarboe, T.; Kubota, S.; Peebles, W. A.; Tritz, K.
2017-05-01
High edge electron temperatures (200 eV or greater) have been measured at the wall-limited plasma boundary in the Lithium Tokamak Experiment (LTX). Flat electron temperature profiles are a long-predicted consequence of low recycling boundary conditions. Plasma density in the outer scrape-off layer is very low, 2-3 × 1017 m-3, consistent with a low recycling metallic lithium boundary. Despite the high edge temperature, the core impurity content is low. Zeff is estimated to be ˜1.2, with a very modest contribution (injection stops, the discharge density is allowed to drop, and the edge is pumped by the low recycling lithium wall. An upgrade to LTX-LTX-β, which includes a 35A, 20 kV neutral beam injector (on loan to LTX from Tri-Alpha Energy) to provide core fueling to maintain constant density, as well as auxiliary heating, is underway. LTX-β is briefly described.
Tokamak D-T neutron source models for different plasma physics confinement modes
Energy Technology Data Exchange (ETDEWEB)
Fausser, Clement, E-mail: clement.fausser@cea.fr [CEA, DEN, Saclay, DANS/DM2S/SERMA, F-91191 Gif-sur-Yvette (France); Puma, Antonella Li; Gabriel, Franck [CEA, DEN, Saclay, DANS/DM2S/SERMA, F-91191 Gif-sur-Yvette (France); Villari, Rosaria [Associazione EURATOM-ENEA sulla Fusione, Via Enrico Fermi 45, 00044 Frascati, Rome (Italy)
2012-08-15
Highlights: Black-Right-Pointing-Pointer HCLL DEMO neutronics is based on plasma physics L-mode, but may use H or A mode. Black-Right-Pointing-Pointer Based on Plasma Physics 0D code, H and A-mode D-T neutron sources formulae are proposed. Black-Right-Pointing-Pointer TRANSGEN code is built to create 2D source maps as input for Monte-Carlo codes. Black-Right-Pointing-Pointer A-mode neutronic impact is compared to L-mode at same power on a HCLL DEMO design. Black-Right-Pointing-Pointer Results show TBR and Me slight changes, contrary to NWL profile: from -22% to +11%. - Abstract: Neutronic studies of European demonstration fusion power plant (DEMO) have been so far based on plasma physics low confinement mode (L-mode). Future tokamaks, nevertheless, may likely use alternative confinement modes such as high or advanced confinement modes (H and A-mode). Based on analytical formulae used in plasma physics, H and A-modes D-T neutron sources formulae are proposed in this paper. For that purpose, a tokamak random neutron source generator, TRANSGEN, has been built generating bidimensional (radial and poloidal) neutron source maps to be used as input for neutronics Monte-Carlo codes (TRIPOLI-4 and MCNP5). The impact of such a source on the neutronic behavior of the European DEMO-2007 Helium-cooled lithium-lead reactor concept has been assessed and compared with previous results obtained using a L-mode neutron source. An A-mode neutron source map from TRANSGEN has been used with the code TRIPOLI-4. Assuming the same fusion power, results show that main reactor global neutronic parameters, e.g. tritium breeding ratio and neutron multiplication factor, evolved slightly when compared to present uncertainties margin. However, local parameters, such as the neutron wall loading (NWL), change significantly compared to L-mode shape: from -22% to +11% for NWL.
Equilibrium Reconstruction in EAST Tokamak
International Nuclear Information System (INIS)
Qian Jinping; Wan Baonian; Shen Biao; Sun Youwen; Liu Dongmei; Xiao Bingjia; Ren Qilong; Gong Xianzu; Li Jiangang; Lao, L. L.; Sabbagh, S. A.
2009-01-01
Reconstruction of experimental axisymmetric equilibria is an important part of tokamak data analysis. Fourier expansion is applied to reconstruct the vessel current distribution in EFIT code. Benchmarking and testing calculations are performed to evaluate and validate this algorithm. Two cases for circular and non-circular plasma discharges are presented. Fourier expansion used to fit the eddy current is a robust method and the real time EFIT can be introduced to the plasma control system in the coming campaign. (magnetically confined plasma)
Plasma rotation and radial electric field with a density ramp in an ohmically heated tokamak
International Nuclear Information System (INIS)
Duval, B.P.; Joye, B.; Marchal, B.
1991-10-01
Measurements of toroidal and poloidal rotation of the TCA plasma with Alfven Wave Heating and different levels of gas feed are reported. The temporal evolution of the rotation was inferred from intrinsic spectral lines of CV, CIII and, using injected helium gas, from HeII. The light collection optics and line intensity permitted the evolution of the plasma rotation to be measured with a time resolution of 2ms. The rotation velocities were used to deduce the radial electric field. With Alfven heating there was no observable change of this electric field that could have been responsible for the density rise which is characteristic of the RF experiments on TCA. The behaviour of the plasma rotation with different plasma density ramp rates was investigated. The toroidal rotation was observed to decrease with increasing plasma density. The poloidal rotation was observed to follow the value of the plasma density. With hard gas puffing, changes in the deduced radial electric field were found to coincide with changes in the peaking of the plasma density profile. Finally, with frozen pellet injection, the expected increase in the radial electric field due to the increased plasma density was not observed, which may explain the poorer confinement of the injected particles. Even in an ohmically heated tokamak, the measurement of the plasma rotation and the radial electric field are shown to be strongly related to the confinement. A thorough statistical analysis of the systematic errors is presented and a new and significant source of uncertainty in the experimental technique is identified. (author) 18 figs., 18 refs
Czech Academy of Sciences Publication Activity Database
Řípa, Milan; Křenek, Petr
2011-01-01
Roč. 17, č. 1 (2011), s. 32-34 ISSN 1210-4612 Institutional research plan: CEZ:AV0Z20430508 Keywords : fusion * tokamak * Compass * Golem * Institute of Plasma Physics AVCR v.v * NBI * diagnostics Subject RIV: BL - Plasma and Gas Discharge Physics
Analytical modeling of equilibrium of strongly anisotropic plasma in tokamaks and stellarators
Energy Technology Data Exchange (ETDEWEB)
Lepikhin, N. D.; Pustovitov, V. D., E-mail: pustovit@nfi.kiae.ru [National Research Centre Kurchatov Institute (Russian Federation)
2013-08-15
Theoretical analysis of equilibrium of anisotropic plasma in tokamaks and stellarators is presented. The anisotropy is assumed strong, which includes the cases with essentially nonuniform distributions of plasma pressure on magnetic surfaces. Such distributions can arise at neutral beam injection or at ion cyclotron resonance heating. Then the known generalizations of the standard theory of plasma equilibrium that treat p{sub ‖} and p{sub ⊥} (parallel and perpendicular plasma pressures) as almost constant on magnetic surfaces are not applicable anymore. Explicit analytical prescriptions of the profiles of p{sub ‖} and p{sub ⊥} are proposed that allow modeling of the anisotropic plasma equilibrium even with large ratios of p{sub ‖}/p{sub ⊥} or p{sub ⊥}/p{sub ‖}. A method for deriving the equation for the Shafranov shift is proposed that does not require introduction of the flux coordinates and calculation of the metric tensor. It is shown that for p{sub ⊥} with nonuniformity described by a single poloidal harmonic, the equation for the Shafranov shift coincides with a known one derived earlier for almost constant p{sub ⊥} on a magnetic surface. This does not happen in the other more complex case.
Fast wave current drive in H mode plasmas on the DIII-D tokamak
International Nuclear Information System (INIS)
Petty, C.C.; Grassie, J.S. de; Baity, F.W.
1999-01-01
Current driven by fast Alfven waves is measured in H mode and VH mode plasmas on the DIII-D tokamak for the first time. Analysis of the poloidal flux evolution shows that the fast wave current drive profile is centrally peaked but sometimes broader than theoretically expected. Although the measured current drive efficiency is in agreement with theory for plasmas with infrequent ELMs, the current drive efficiency is an order of magnitude too low for plasmas with rapid ELMs. Power modulation experiments show that the reduction in current drive with increasing ELM frequency is due to a reduction in the fraction of centrally absorbed fast wave power. The absorption and current drive are weakest when the electron density outside the plasma separatrix is raised above the fast wave cut-off density by the ELMs, possibly allowing an edge loss mechanism to dissipate the fast wave power since the cut-off density is a barrier for fast waves leaving the plasma. (author)
Probing of the peripheral plasma of a tokamak by diaphragm thermography
International Nuclear Information System (INIS)
Gyunter, K.; Grunov, K.; Evstigneev, S.A.
1985-01-01
The tokamak limiter diverts significant particle and energy fluxes from the plasma and sharply decreases the interaction between the plasma and wall, thus protecting the wall from destruction and the plasma from catastrophic contamination. The temperature of a moveble limiter is measured in the device on the basis of the infrared radiation from its surface. By applying certain models of the layer near the wall this permits to calculate the magnitude of the heat flux directed to the limiter. The power density is, in normal discharges, 2-3 kW/cm 2 ; in discharges with disruptions the power density may reach 10 kW/cm 2 . The measurements show that longitudinal energy flux in the peripheral layer of the plasma filament decreases radially in an exponential manner and can yield the parameter of the decrease. It is found that during discharges involving breakdown a very nonuniform heating of the limiter surface occurs at the initial and final stages of normal discharges, this indicates the existence of a certain structure of the peripheral plasma layer
Blob/hole formation and zonal-flow generation in the edge plasma of the JET tokamak
DEFF Research Database (Denmark)
Xu, G.S.; Naulin, Volker; Fundamenski, W.
2009-01-01
The first experimental evidence showing the connection between blob/hole formation and zonal-flow generation was obtained in the edge plasma of the JET tokamak. Holes as well as blobs are observed to be born in the edge shear layer, where zonal-flows shear off meso-scale coherent structures, lead...
Energy Technology Data Exchange (ETDEWEB)
Martin, R.; Manero, F.
1984-07-01
In this paper a description is given of the microwave interferometer used for measuring the plasma electronic density in the TJ-1 Tokamak of Fusion Division of JEN. The principles of the electronic density measurement are discussed in detail, as well as those concerning the determination of density pro files from experimental data. A description of the interferometer used in the TJ-1 Tokamak is given, together with a detailed analysis of the circuits which constitute the measuring chain. The working principles of the klystron reflex and hybrid rings are also presented. (Author) 23 refs.
Preliminary Design of Alborz Tokamak
Mardani, M.; Amrollahi, R.; Saramad, S.
2012-04-01
The Alborz tokamak is a D-shape cross section tokamak that is under construction in Amirkabir University of Technology. The most important part of the tokamak design is the design of TF coils. In this paper a refined design of the TF coil system for the Alborz tokamak is presented. This design is based on cooper cable conductor with 5 cm width and 6 mm thickness. The TF coil system is consist of 16 rectangular shape coils, that makes the magnetic field of 0.7 T at the plasma center. The stored energy in total is 160 kJ, and the power supply used in this system is a capacitor bank with capacity of C = 1.32 mF and V max = 14 kV.
Dnestrovskij, Yu. N.; Vershkov, V. A.; Danilov, A. V.; Dnestrovskij, A. Yu.; Zenin, V. N.; Lysenko, S. E.; Melnikov, A. V.; Shelukhin, D. A.; Subbotin, G. F.; Cherkasov, S. V.
2018-01-01
In ohmically heated (OH) plasma with low recycling, an improved particle confinement (IPC) mode is established during gas puffing. However, after gas puffing is switched off, this mode is retained only for about 100 ms, after which an abrupt phase transition into the low particle confinement (LPC) mode occurs in the entire plasma cross section. During such a transition, energy transport due to heat conduction does not change. The phase transition in OH plasma is similar to the effect of density pump-out from the plasma core, which occurs after electron cyclotron heating (ECH) is switched on. Analysis of the measured plasma pressure profiles in the T-10 tokamak shows that, after gas puffing in the OH mode is switched off, the plasma pressure profile in the IPC stage becomes more peaked and, after the peakedness exceeds a certain critical value, the IPC-LPC transition occurs. Similar processes are also observed during ECH. If the pressure profile is insufficiently peaked during ECH, then the density pump-out effect comes into play only after the critical peakedness of the pressure profile is reached. In the plasma core, the density and pressure profiles are close to the corresponding canonical profiles. This allows one to derive an expression for the particle flux within the canonical profile model and formulate a criterion for the IPC-LPC transition. The time evolution of the plasma density profile during phase transitions was simulated for a number of T-10 shots with ECH and high recycling. The particle transport coefficients in the IPC and LPC phases, as well as the dependences of these coefficients on the ECH power, are determined.
Recent progresses on high performance steady-state plasmas in the superconducting tokamak TRIAM-1M
International Nuclear Information System (INIS)
Itoh, Satoshi; Sato, Kohnosuke; Nakamura, Kazuo
1999-01-01
The overview of TRIAM-1M experiments is described. The up-to-date issues for steady-state operation are presented through the experience of the achievement of super ultra long tokamak discharges (SULD) sustained by lower hybrid current drive (LHCD) over 2 hours. The importance of the control of an initial phase of plasma, the avoidance of the concentration of huge heat load, the wall conditioning, and abrupt stop of the long discharges are proposed as the indispensable issues for the achievement of the steady-state operation of tokamak. A high ion temperature (HIT) discharge fully sustained by 2.45 GHz LHCD with both high ion temperature and steep temperature gradient is successfully demonstrated for longer than 1 min in the limiter configuration. The HIT discharges can be obtained in the narrow window of density and position. Moreover, the avoidance of the concentration of heat load on a limiter is the key point for the achievement and its long sustainment. As the effective thermal insulation between the wall and the plasma is improved on the single null configuration, HIT discharges with peak ion temperature > 5keV and steeper gradient up to 85 keV/m can be achieved by the exquisite control of density and position. The plasmas with high κ ∼1.5 can be also demonstrated for longer than 1 min. The current profile is also well-controlled for about 2 orders in magnitude longer than the current diffusion time using combined LHCD. The serious damage to the material of the first wall caused by energetic neutral particles produced via charge exchange process is also described. As the neutral particles cannot be affected by magnetic field, this damage by neutral particles must be avoided by the new technique. (author)
International Nuclear Information System (INIS)
Toi, K.; Itoh, S.; Kadota, K.; Kawahata, K.; Noda, N.
1979-03-01
In the resistive shell tokamak, JIPP T-II, the current density profile control is carried out by pre-programming of both gas puffing and plasma current waveform. The major disruptions are completely suppressed by the method and a high density tokamak plasma with low q(a) is obtained with better MHD stability, where the line-average electron density n sub(e) 13 cm -3 and safety factor at plasma surface q(a) >= 2.2. The control criterion that the current density profile is successfully controlled is derived as a function of the ratio of plasma current to the electron density I sub(p)/n sub(e) in the current rising phase, i.e., 20 x 10 -13 -13 kA.cm 3 . (author)
Data Acquisition and Automation for Plasma Rotation Diagnostic in the TCABR Tokamak
Ronchi, G.; Severo, J. H. F.; de Sá, W. P.; Galvão, R. M. O.
2015-03-01
In this work we describe the implementation of a full modular system of data acquisition and processing for the plasma rotation diagnostic in the TCABR tokamak. The experimental setup uses a single monochromator and six photomultipliers (PMT), in which pair of PMTs measures the light at slightly different wavelengths. Thus, it can measure the time evolution of the Doppler shift of the impurities emission lines coming from three spatial positions (one for toroidal rotation and two for poloidal rotation). The data acquisition and preanalysis program were written with LabVIEW software and is capable of controlling the spectrometer wavelength, PMTs power supplies, data acquisition, and storage. All data are recorded in MDSplus trees that easily allow data visualization and post-processing analysis (both locally and remotely) via MATLAB, Python, Java and others programming languages. This system can run independently from other diagnostics and machine systems and can be integrated with the main tokamak control system by means of TCP/IP messages.
International Nuclear Information System (INIS)
Romanelli, M.
1999-09-01
The poloidal variation of impurity densities over magnetic surfaces brings about an enhancement of neoclassical transport coefficients, as shown by Romanelli and Ottaviani for impurities in the Pfirsch Schlueter regime and by Helander for particles in the banana-plateau regime, both in a large aspect ratio tokamak. The same effect will occur in a finite aspect ratio tokamak and therefore it is considered to be relevant for inclusion in transport codes for comparison with the experimental measurements of impurity transport. Here an expression for the impurity-density poloidal-variation generated by the fast toroidal rotation of the plasma column is presented in general coordinates. (author)
The O-X-B mode conversion scheme for ECRH of a high-density Tokamak plasma
DEFF Research Database (Denmark)
Hansen, F. R.; Lynov, Jens-Peter; Michelsen, Poul
1985-01-01
A method to apply electron cyclotron resonance heating (ECRH) to a Tokamak plasma with central density higher than the critical density for cut-off of the ordinary mode (O-mode) has been investigated. This method involves two mode conversions, from an O-mode via an extraordinary mode (X-mode......) into an electron Bernstein mode (B-mode). Radial profiles for the power deposition and the wave-drive current due to the B-waves are calculated for realistic antenna radiation patterns with parameters corresponding to the Danish DANTE Tokamak and to Princeton's PLT....
Energy Technology Data Exchange (ETDEWEB)
NONE
1994-05-27
If the US is to meet the energy needs of the future, it is essential that new technologies emerge to compensate for dwindling supplies of fossil fuels and the eventual depletion of fissionable uranium used in present-day nuclear reactors. Fusion energy has the potential to become a major source of energy for the future. Power from fusion energy would provide a substantially reduced environmental impact as compared with other forms of energy generation. Since fusion utilizes no fossil fuels, there would be no release of chemical combustion products to the atmosphere. Additionally, there are no fission products formed to present handling and disposal problems, and runaway fuel reactions are impossible due to the small amounts of deuterium and tritium present. The purpose of the TPX Project is to support the development of the physics and technology to extend tokamak operation into the continuously operating (steady-state) regime, and to demonstrate advances in fundamental tokamak performance. The purpose of TFTR D&D is to ensure compliance with DOE Order 5820.2A ``Radioactive Waste Management`` and to remove environmental and health hazards posed by the TFTR in a non-operational mode. There are two proposed actions evaluated in this environmental assessment (EA). The actions are related because one must take place before the other can proceed. The proposed actions assessed in this EA are: the decontamination and decommissioning (D&D) of the Tokamak Fusion Test Reactor (TFTR); to be followed by the construction and operation of the Tokamak Physics Experiment (TPX). Both of these proposed actions would take place primarily within the TFTR Test Cell Complex at the Princeton Plasma Physics Laboratory (PPPL). The TFTR is located on ``D-site`` at the James Forrestal Campus of Princeton University in Plainsboro Township, Middlesex County, New Jersey, and is operated by PPPL under contract with the United States Department of Energy (DOE).
Optical boundary reconstruction of tokamak plasmas for feedback control of plasma position and shape
Hommen, G.; de M. Baar,; Nuij, P.; McArdle, G.; Akers, R.; Steinbuch, M.
2010-01-01
A new diagnostic is developed to reconstruct the plasma boundary using visible wavelength images. Exploiting the plasma's edge localized and toroidally symmetric emission profile, a new coordinate transform is presented to reconstruct the plasma boundary from a poloidal view image. The plasma
Analytical modelling of resistive wall mode stabilization by rotation in toroidal tokamak plasmas
International Nuclear Information System (INIS)
Ham, C J; Gimblett, C G; Hastie, R J
2011-01-01
Stabilization of the resitive wall mode (RWM) may allow fusion power to be doubled for a given magnetic field in advanced tokamak operation. Experimental evidence from DIII-D and other machines suggests that plasma rotation can stabilize the RWM. Several authors (Finn 1995 Phys. Plasmas 2 3782, Bondeson and Xie 1997 Phys. Plasmas 4 2081) have constructed analytical cylindrical models for the RWM, but these do not deal with toroidal effects. The framework of Connor et al (1988 Phys. Fluids 31 577) is used to develop ideal plasma analytic models with toroidicity included. Stepped pressure profiles and careful ordering of terms are used to simplify the analysis. First, a current driven kink mode model is developed and a dispersion relation for arbitrary current profile is calculated. Second, the external pressure driven kink mode is similarly investigated as the most important RWM arises from this mode. Using this latter model it is found that the RWM is stabilized by Alfven continuum damping with rotation levels similar to those seen in experiments. An expression for the stability of the external kink mode for more general current profiles and a resistive wall is derived in the appendix.
Picosecond LIBS diagnostics for Tokamak in situ plasma facing materials chemical analysis
Morel, Vincent; Pérès, Bastien; Bultel, Arnaud; Hideur, Ammar; Grisolia, Christian
2016-02-01
First results are presented in relation with experimental and theoretical studies performed at the CORIA laboratory in the general framework of the determination of the chemical analysis of Tokamak plasma facing materials by laser-induced breakdown spectroscopy (LIBS) in picosecond regime. Experiments are performed on W in a specific chamber. This chamber is equipped with a UV-visible-near IR spectroscopic device. Boltzmann plots are derived for typical laser characteristics. We show that the initial excitation temperature is close to 12 000 K followed by a quasi steady value close to 8500 K. The ECHREM (Euler code for CHemically REactive Multicomponent laser-induced plasmas) code is developed to reproduce the laser-induced plasmas. This code is based on the implementation of a Collisional-Radiative model in which the different excited states are considered as full species. This state-to-state approach is relevant to theoretically assess the departure from excitation and chemical equilibrium. Tested on aluminum, the model shows that the plasma remains close to excitation equilibrium.
An improved routine for the fast estimate of ion cyclotron heating efficiency in tokamak plasmas
International Nuclear Information System (INIS)
Brambilla, M.
1992-02-01
The subroutine ICEVAL for the rapid simulation of Ion Cyclotron Heating in tokamak plasmas is based on analytic estimates of the wave behaviour near resonances, and on drastic but reasonable simplifications of the real geometry. The subroutine has been rewritten to improve the model and to facilitate its use as input in transport codes. In the new version the influence of quasilinear minority heating on the damping efficiency is taken into account using the well-known Stix analytic approximation. Among other improvements are: a) the possibility of considering plasmas with more than two ion species; b) inclusion of Landau, Transit Time and collisional damping on the electrons non localised at resonances; c) better models for the antenna spectrum and for the construction of the power deposition profiles. The results of ICEVAL are compared in detail with those of the full-wave code FELICE for the case of Hydrogen minority heating in a Deuterium plasma; except for details which depend on the excitation of global eigenmodes, agreement is excellent. ICEVAL is also used to investigate the enhancement of the absorption efficiency due to quasilinear heating of the minority ions. The effect is a strongly non-linear function of the available power, and decreases rapidly with increasing concentration. For parameters typical of Asdex Upgrade plasmas, about 4 MW are required to produce a significant increase of the single-pass absorption at concentrations between 10 and 20%. (orig.)
International Nuclear Information System (INIS)
Jeronimo, Leonardo Cunha
2013-01-01
Over the last few years is remarkable, so increasingly evident the need for a new source of energy for mankind. One promising option is through nuclear fusion, where the plasma produced in the reactor can be converted into electrical energy. Therefore, knowing the characteristics of this plasma is very important to control it and understand it so desirable. One of the diagnostic options is called Thomson scattering . This is considered the most reliable method for the determination of important plasma parameters such as temperature and electron density, and may also help in the study and explanation of various internal mechanisms. The great advantage lies in the tact that they consist of a direct measurement and nonperturbative. But it is a diagnosis whose installation and execution is admittedly complex, limiting it only a few laboratories in the fíeld of fusion for the world. Among the main difficulties, wc can highlight the fact that the scattered signal is very small, thus requiring a large increase of the incident power. Moreover, the external physical conditions can cause mechanical vibrations that eliminate or minimize them as much as possible, is a great challenge, considering the optical micrometrically very sensitive and needs involved in the system. This work describes the entire process of installation and operation of Thomson scattering diagnostic in tokamak TCABR and through this diagnosis, we work on results of electron temperature, to finally be able to calculate the electron density of the plasma. (author)
Modification of boundary plasma behavior by Ion Bernstein Wave heating on HT-7 tokamak
International Nuclear Information System (INIS)
Xu Guoshen
2002-01-01
Cooperated with Fusion Research Center, the University of Texas at Austin, U.S.A. The boundary plasma behavior during Ion Bernstein Wave (IBW) heating was investigated using Langmuir probe arrays on HT-7 tokamak. The particle confinement improvement of over a factor of 2 was observed in 30 MHz IBW heated plasma with RF power > 120 kW. The strong de-correlation effect of fluctuations resulted in that the turbulent particle flux dropped more than an order of magnitude. In IBW heated plasma, an additional inward E r and associated poloidal ExB flows were produced, which could account for the additional poloidal velocity in the electron diamagnetic direction in the scrape-of layer (SOL). Three-wave nonlinear phase coupling increased evidently and low frequency fluctuations (about 5 kHz) were generated, which dominated the boundary turbulence during IBW heating. The 5/2-D resonant layer was located in the plasma edge region, which is found to be the mechanism underlying these phenomena. (author)
Multi-scale semi-ideal magnetohydrodynamics of a tokamak plasma
Energy Technology Data Exchange (ETDEWEB)
Bazdenkov, S.; Sato, Tetsuya; Watanabe, Kunihiko
1995-09-01
An analytical model of fast spatial flattening of the toroidal current density and q-profile at the nonlinear stage of (m = 1/n = 1) kink instability of a tokamak plasma is presented. The flattening is shown to be an essentially multi-scale phenomenon which is characterized by, at least, two magnetic Reynolds numbers. The ordinary one, R{sub m}, is related with a characteristic radial scale-length, while the other, R{sub m}{sup *}, corresponds to a characteristic scale-length of plasma inhomogeneity along the magnetic field line. In a highly conducting plasma inside the q = 1 magnetic surface, where q value does not much differ from unity, plasma evolution is governed by a multi-scale non-ideal dynamics characterized by two well-separated magnetic Reynolds numbers, R{sub m} and R{sub m}{sup *} {identical_to} (1 - q) R{sub m}, where R{sub m}{sup *} - O(1) and R{sub m} >> 1. This dynamics consistently explains two seemingly contradictory features recently observed in a numerical simulation [Watanabe et al., 1995]: (i) the current profile (q-profile) is flattened in the magnetohydrodynamic time scale within the q = 1 rational surface; (ii) the magnetic surface keeps its initial circular shape during this evolution. (author).
Real-time digital control of plasma position and shape on the TEXTOR tokamak
International Nuclear Information System (INIS)
Mitri, Mikhael
2009-01-01
Beside the objective of contributing to the controlled thermonuclear fusion research and ultimately the development of a fusion based power plant, the main objectives of the thesis are a substantial improvement of plasma vertical position control and plasma shape control as well as a better understanding of formerly unexplained effects, e.g. disturbance fields. As for the vertical position control, a deep analysis has to be undertaken to identify the problem sources. Accurate control of the plasma position is very difficult to achieve. This is mainly due to the complexity of the tokamak and the difficulty in measuring or modelling all relevant discharge variables. Any models would be highly nonlinear and time varying. Thus, for simulation and controller design, a simplified, but nevertheless accurate model has to be developed, based on physics and measured data of the process. Furthermore, the quality of the measured position has to be improved by using new inductive sensors, integrators, and hardware. The integration drift problem has to be analysed and resolved by developing a drift-free integration method. Concerning the shape control, a better understanding of the relation between the stray fields and the iron core saturation is required. Furthermore, the influence on the plasma elongation has to be determined. Upon this, a shape compensation algorithm has to be developed accordingly. The accuracy of the shape control has to be better than 1%. (orig.)
Plasma interaction with tungsten samples in the COMPASS tokamak in ohmic ELMy H-modes
International Nuclear Information System (INIS)
Dimitrova, M; Weinzettl, V; Matejicek, J; Dejarnac, R; Stöckel, J; Havlicek, J; Panek, R; Popov, Tsv; Marinov, S; Costea, S
2016-01-01
This paper reports experimental results on plasma interaction with tungsten samples with or without pre-grown He fuzz. Under the experimental conditions, arcing was observed on the fuzzy tungsten samples, resulting in localized melting of the fuzz structure that did not extend into the bulk. The parallel power flux densities were obtained from the data measured by Langmuir probes embedded in the divertor tiles on the COMPASS tokamak. Measurements of the current-voltage probe characteristics were performed during ohmic ELMy H-modes reached in deuterium plasmas at a toroidal magnetic field B T = 1.15 T, plasma current I p = 300 kA and line-averaged electron density n e = 5×10 19 m -3 . The data obtained between the ELMs were processed by the recently published first-derivative probe technique for precise determination of the plasma potential and the electron energy distribution function (EEDF). The spatial profile of the EEDF shows that at the high-field side it is Maxwellian with a temperature of 5 -- 10 eV. The electron temperatures and the ion-saturation current density obtained were used to evaluate the radial distribution of the parallel power flux density as being in the order of 0.05 -- 7 MW/m 2 . (paper)
Local magnetic divertor for control of the plasma--limiter interaction in a tokamak
International Nuclear Information System (INIS)
Zweben, S.J.; Liewer, P.C.; Gould, R.W.
1984-01-01
An experiment is described in which plasma flow to a tokamak limiter is controlled through the use of a local toroidal divertor coil mounted inside the limiter itself. This coil produces a local perturbed field B/sub C/ approximately equal to the local unperturbed toroidal field B/sub T/approx. =3 kG, such that when B/sub C/ adds to B/sub T/ the field lines move into the limiter and the local plasma flow to it increases by a factor as great as 1.6, and when B/sub C/ subtracts from B/sub T/ the field lines move away from the limiter and the local plasma flow to it decreases by as much as a factor of 4. A simple theoretical model is used to interpret these results. Since these changes occur without significantly affecting global plasma confinement, such a control scheme may be useful for optimizing the performance of pumped limiters
Modification of boundary plasma behavior by Ion Bernstein Wave heating on the HT-7 tokamak
International Nuclear Information System (INIS)
Xu, G.S.; Wan, B.N.; Song, M.; Ling, B.L.; Li, C.F.; Li, J.
2003-01-01
The boundary plasma behavior during Ion Bernstein Wave heating was investigated using Langmuir probe arrays on the HT-7 tokamak. A distinct weak turbulence regime was reproducibly observed in the 30 MHz IBW heated plasmas with RF power larger than 120 kW, which resulted in a particle confinement improvement of a factor of 2. The strong suppression and decorrelation effect of fluctuations resulted in the turbulent particle flux dropping by more than an order of magnitude in the plasma boundary region. An additional inward radial electric field and associated poloidal ExB flows were produced, which could account for the additional poloidal velocity in the electron diamagnetic direction at some radial locations of the boundary plasma. The electrostatic fluctuations were nearly completely decorrelated in the high frequency region and only low frequency fluctuations remained. The poloidal correlation was considerably reduced in the high poloidal wave number region and only the fluctuations with long poloidal wavelength remained. Three-wave nonlinear phase coupling between the whole frequency domain and the very low frequency region increased significantly in both the plasma edge and the SOL. Quite low frequency fluctuations (about 5 kHz) were generated, which dominated the boundary turbulence during IBW heating. Detailed analyses suggested that, when an IBW with a frequency of 30 MHz was launched into a plasma with the toroidal magnetic field between 1.75 T and 2.0 T, the ion cyclotron resonant layer of 5/2.D was located in the plasma edge region. The poloidal ExB sheared flows generated by IBW near this layer due to a ponderomotive interaction were found to be the mechanism underlying these phenomena. (author)
Energy Technology Data Exchange (ETDEWEB)
Stoschus, Henning
2011-10-13
Small three-dimensional (3D) magnetic perturbations can be used as a tool to control the edge plasma parameters in magnetically confined plasmas in high confinement mode (''H-mode'') to suppress edge instabilities inherent to this regime, the Edge Localized Modes (ELMs). In this work, the impact of rotating 3D resonant magnetic perturbation (RMP) fields on the edge plasma structure characterized by electron density and temperature fields is investigated. We study a low confinement (L-mode) edge plasma (r/a>0.9) with high resistivity (edge electron collisionality {nu}{sup *}{sub e}>4) at the TEXTOR tokamak. The plasma structure in the plasma edge is measured by a set of high resolution diagnostics: a fast CCD camera ({delta}t=20 {mu}s) is set up in order to visualize the plasma structure in terms of electron density variations. A supersonic helium beam diagnostic is established as standard diagnostic at TEXTOR to measure electron density n{sub e} and temperature T{sub e} with high spatial ({delta}r=2 mm) and temporal resolution ({delta}t=20 {mu}s). The measured plasma structure is compared to modeling results from the fluid plasma and kinetic neutral transport code EMC3-EIRENE. A sequence of five new observations is discussed: (1) Imaging of electron density variations in the plasma edge shows that a fast rotating RMP field imposes an edge plasma structure, which rotates with the external RMP rotation frequency of vertical stroke {nu}{sub RMP} vertical stroke =1 kHz. (2) Measurements of the electron density and temperature provide strong experimental evidence that in the far edge a rotating 3D scrape-off layer (SOL) exists with helical exhaust channels to the plasma wall components. (3) Radially inward, the plasma structure at the next rational flux surface is found to depend on the relative rotation between external RMP field and intrinsic plasma rotation. For low relative rotation the plasma structure is dominated by a particle and energy loss
Edge localized mode control by resonant magnetic perturbations in tokamak plasmas
International Nuclear Information System (INIS)
Orain, Francois
2014-01-01
The growth of plasma instabilities called Edge Localized Modes (ELMs) in tokamaks results in the quasi-periodic relaxation of the edge pressure profile. These relaxations induce large heat fluxes which might be harmful for the divertor in ITER, thus ELM control is mandatory in ITER. One of the promising control methods planned in ITER is the application of external resonant magnetic perturbations (RMPs), already efficient for ELM mitigation/suppression in current tokamak experiments. However a better understanding of the interaction between ELMs, RMPs and plasma flows is needed to explain the experimental results and make reliable predictions for ITER. In this perspective, non-linear modeling of ELMs and RMPs is done with the reduced MHD code JOREK, in toroidal geometry including the X-point and the Scrape-Off Layer. The initial model has been further developed to describe self-consistent plasma flows - with the addition of the bi-fluid diamagnetic drifts, the neoclassical friction and a source of parallel rotation - and to simulate the RMP penetration consistently with the plasma response. As a first step, the plasma response to RMPs (without ELMs) is studied for JET, MAST and ITER realistic plasma parameters and geometry. The general behaviour of the plasma/RMP interaction is similar for the three studied cases: RMPs are generally screened by the formation of response currents, induced by the plasma rotation on the resonant surfaces. RMPs however penetrate at the very edge where an ergodic zone is formed. The amplification of the non-resonant spectrum of the magnetic perturbations is also observed in the core. The edge ergodization induces an enhanced transport at the edge, which slightly degrades the pedestal profiles. RMPs also generate the 3D-deformation of the plasma boundary with a maximum deformation near the X-point where lobe structures are formed. Then the full dynamics of a multi-ELM cycle (without RMPs) is modeled for the first time in realistic
International Nuclear Information System (INIS)
Adamek, J.; Stoeckel, J.; Duran, I.; Hron, M.; Panek, R.; Tichy, M.; Schrittwieser, R.; Ionita, C.; Balan, P.; Martines, E.; Van Oost, G.
2005-01-01
A novel approach to the direct measurement of the plasma potential in magnetized plasma, using the so-called 'ball-pen probe', was recently tested in the CASTOR tokamak. Comparison with the standard technique of plasma potential measurement using the emissive probe is reported. It is found that the plasma potential determined by the emissive probe is systematically lower than that measured by the ball-pen probe. The difference is of the order of kT e /e. A possible reason of this difference is the space charge occurring in the proximity of the emissive probe. (author)
Energy Technology Data Exchange (ETDEWEB)
Scharer, J.E.
1992-12-31
The research performed under this grant during the past year has been concentrated on the following several key tokamak ICRF (Ion Cyclotron Range of Frequencies) coupling, heating and current drive issues: Efficient coupling during the L- to H- mode transition by analysis and computer simulation of ICRF antennas; analysis of ICRF cavity-backed coil antenna coupling to plasma edge profiles including fast and ion Bernstein wave coupling for heating and current drive; benchmarking the codes to compare with current JET, D-IIID and ASDEX experimental results and predictions for advanced tokamaks such as BPX and SSAT (Steady-State Advanced Tokamak); ICRF full-wave field solutions, power conservation, heating analyses and minority ion current drive; and the effects of fusion alpha particle or ion tail populations on the ICRF absorption. Research progress, publications, and conference and workshop presentations are summarized in this report.
Alpha particle effects in burning tokamak plasmas: overview and specific examples
International Nuclear Information System (INIS)
Sigmar, D.J.
1986-07-01
Using the total power balance of an ignited tokamak plasma as a guideline, a range of alpha driven effects is surveyed regarding their impact on achieving and maintaining fusion burn. Specific examples of MHD and kinetic modes and multi species transport dynamics are discussed, including the possible interaction of these categories of effects. This power balance approach rather than a straightforward enumeration of possible effects serves to reveal their non-linear dependence and the ensuing fragility of our understanding of the approach to and maintenance of ignition. Specific examples are given of the interaction between α-power driven sawtoothing and ideal MHD stability, and direct α-effects on MHD modes including kinetic corrections. Anomalous ion heat transport and central impurity peaking mechanisms and anomalous and collisional α-transport including the ambipolar electric field are discussed
Stationary magnetic entropy in ohmic tokamak plasmas: Experimental evidence from the TCV device
International Nuclear Information System (INIS)
Minardi, E.; Weisen, H.
2001-01-01
Electron temperature, pressure and density profiles from a large variety of ohmically heated plasmas in the TCV tokamak (B T 0 = 0.88 m, a /(q 0 j 0 ), where is the cross-sectionally averaged current density. These observed sawtooth inversion radii and electron temperature profiles are in excellent agreement with the predictions. The stiffness of the temperature profiles implies a correlation between density and pressure profiles, which is observed in experiment. The observed electron pressure profiles are consistent with poloidal equilibria derived by combining the requirement that magnetic entropy be constant in time with the Grad-Shafranov-Schlueter equation. The observed range of pressure profiles is however smaller than the theoretically accessible one. (author)
Effects of toroidal field ripple on suprathermal ions in tokamak plasmas
International Nuclear Information System (INIS)
Goldston, R.J.; Towner, H.H.
1980-02-01
Analytic calculations of three important effects of toroidal field ripple on suprathermal ions in tokamak plasmas are presented. In the first process, collisional ripple-trapping, beam ions become trapped in local magnetic wells near their banana tips due to pitch-angle scattering as they traverse the ripple on barely unripple-trapped orbits. In the second process, collisionless ripple-trapping, near-perpendicular untrapped ions are captured (again near a banana tip) due to their finite orbits, which carry them out into regions of higher ripple. In the third process, banana-drift diffusion, fast-ion banana orbits fail to close precisely, due to a ripple-induced variable lingering period near the banana tips. These three mechanisms lead to substantial radial transport of banana-trapped, neutral-beam-injected ions when the quantity α* identical with epsilon/sin theta/Nqdelta is of order unity or smaller
Effects of toroidal field ripple on suprathermal ions in tokamak plasmas
International Nuclear Information System (INIS)
Goldston, R.J.; Towner, H.H.
1981-01-01
Analytic calculations of three important effects of toroidal field ripple on suprathermal ions in tokamak plasmas are presented. In the first process, collisional ripple-trapping, ions become trapped in local magnetic wells near their banana tips owing to pitch-angle scattering as they traverse the ripple on barely unripple-trapped orbits. In the second process, collisionless ripple-trapping, ions are captured (again near a banana tip) owing to their finite orbits, which carry them out into regions of higher ripple. In the third process, banana-drift diffusion, fast-ion banana orbits fail to close precisely, due to a ripple-induced 'variable lingering period' near the banana tips. These three mechanisms lead to substantial radial transport of banana-trapped, neutral-beam-injected ions when the quantity α* is identical with epsilonsinthetaNqdelta is of order unity or smaller. (author)
Drift-kinetic simulations of axisymmetric plasma transport at the edge of a divertor tokamak
Dorf, M.; Dorr, M.; Ghosh, D.; Hittinger, J.; Lee, W.; Cohen, R.
2017-10-01
Eulerian kinetic calculations are presented for the axisymmetric cross-separatrix transport of plasma at the edge of a tokamak. The simulations are performed with a high-order finite-volume code COGENT that solves the full-F drift-kinetic equation for the ion species including the effects of fully-nonlinear Fokker-Plank ion-ion collisions. The ion kinetic response is coupled to two-dimensional self-consistent electrostatic potential variations, which are obtained from the vorticity equation with the isothermal fluid electron model. The paper also presents recent progress toward the full-edge turbulence code. The slab-geometry 5D version has recently become available and is successfully verified in simulations of the collisionless drift-wave instability. Work performed for USDOE, at LLNL under contract DE-AC52-07NA27344.
Simulations of edge and scrape off layer turbulence in mega ampere spherical tokamak plasmas
DEFF Research Database (Denmark)
Militello, F; Fundamenski, W; Naulin, Volker
2012-01-01
of the edge/SOL density and temperature. In addition, we also discuss how the system changes when the length of the divertor leg is modified. This allows one to better understand the regime of operation of the Super-X divertor which will be implemented on MAST-Upgrade. The results obtained qualitatively agree......The L-mode interchange turbulence in the edge and scrape-off-layer (SOL) of the tight aspect ratio tokamak MAST is investigated numerically. The dynamics of the boundary plasma are studied using the 2D drift-fluid code ESEL, which has previously shown good agreement with large aspect ratio machines....... In this context, a MAST-TCV comparison is presented in order to link the present analysis to well documented references. Next, scans of various edge parameters, such as density, temperature and current, are performed in the simulations with the aim of characterizing the profiles, fluctuation level and statistics...
International Nuclear Information System (INIS)
TalebiTaher, A.; Ghoranneviss, M.; Tarkeshian, R.; Salem, M. K.; Khorshid, P.
2008-01-01
Since displacement is very important for plasma position control, in IR-T1 tokamak a combination of two cosine coils and two saddle sine coils is used for horizontal displacement measurement. According to the multiple moment theory, the output of these coils linearly depends to radial displacement of plasma column. A new circuit for adding these signals to feedback system designed and unwanted effects of other fields in final output compensated. After compensation and calibration of the system, the output of horizontal displacement circuits applied to feedback control system. By considers the required auxiliary vertical field, a proportional amplifier and driver circuit are constructed to drive power transistors these power transistors switch the feedback bank capacitors. In the experiment, a good linear proportionality between displacement and output observed by applying an appropriate feedback field, the linger confinement time in IR-T1 tokamak obtained, applying this system to discharge increased the plasma duration and realizes repetitive discharges
Energy Technology Data Exchange (ETDEWEB)
Maingi, R. [Oak Ridge Associated Universities, TN (United States); Terreault, B. [Inst. National de la Recherche Scientifique, Varennes, Quebec (Canada); Haas, G. [Max Planck Inst. fuer Plasmaphysik, Garching (Germany)] [and others
1996-06-01
The authors present a comparison of the wall deuterium retention and plasma fueling requirements of three diverted tokamaks, DIII-D, TdeV, and ASDEX-Upgrade, with different fractions of graphite coverage of stainless steel or Inconel outer walls and different heating modes. Data from particle balance experiments on each tokamak demonstrate well-defined differences in wall retention of deuterium gas, even though all three tokamaks have complete graphite coverage of divertor components and all three are routinely boronized. This paper compares the evolution of the change in wall loading and net fueling efficiency for gas during dedicated experiments without Helium Glow Discharge Cleaning on the DIII-D and TdeV tokamaks. On the DIII-D tokamak, it was demonstrated that the wall loading could be increased by > 1,250 Torr-1 (equivalent to 150 {times} plasma particle content) plasma inventories resulting in an increase in fueling efficiency from 0.08 to 0.25, whereas the wall loading on the TdeV tokamak could only be increased by < 35 Torr-{ell} (equivalent to 50{times} plasma particle content) plasma inventories at a maximum fueling efficiency {approximately} 1. Data from the ASDEX-Upgrade tokamak suggests qualitative behavior of wall retention and fueling efficiency similar to DIII-D.
Burke, M. G.; Barr, J. L.; Bongard, M. W.; Fonck, R. J.; Hinson, E. T.; Perry, J. M.; Reusch, J. A.; Schlossberg, D. J.
2017-07-01
Plasmas in the Pegasus spherical tokamak are initiated and grown by the non-solenoidal local helicity injection (LHI) current drive technique. The LHI system consists of three adjacent electron current sources that inject multiple helical current filaments that can reconnect with each other. Anomalously high impurity ion temperatures are observed during LHI with T i,OV ⩽ 650 eV, which is in contrast to T i,OV ⩽ 70 eV from Ohmic heating alone. Spatial profiles of T i,OV indicate an edge localized heating source, with T i,OV ~ 650 eV near the outboard major radius of the injectors and dropping to ~150 eV near the plasma magnetic axis. Experiments without a background tokamak plasma indicate the ion heating results from magnetic reconnection between adjacent injected current filaments. In these experiments, the HeII T i perpendicular to the magnetic field is found to scale with the reconnecting field strength, local density, and guide field, while {{T}\\text{i,\\parallel}} experiences little change, in agreement with two-fluid reconnection theory. This ion heating is not expected to significantly impact the LHI plasma performance in Pegasus, as it does not contribute significantly to the electron heating. However, estimates of the power transfer to the bulk ion are quite large, and thus LHI current drive provides an auxiliary ion heating mechanism to the tokamak plasma.
A study on the fusion reactor - Study of ICRF coupling in the KAIST tokamak plasma
Energy Technology Data Exchange (ETDEWEB)
Choi, Duk In; Chang, Hong Young; Lee, Sun Chil; Jun, Sang Jin; Kwon, Gi Chung; Seo, Sung Hun; Heo, Sung Hoi; You, Kwang Il; Song, Soo Bin; Lee, Sung Chul; Kim, Min Chul; Lee, Chan Hui [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)
1996-09-01
Research objectives are to design and fabricate the antenna, measure t property of absorption transmitted to the plasma, and research the physical phenomena about the ICRF coupling, Main heating method is ohmic heating at the KAIST tokamak. The power of the plasma produced by ohmic heating is about 100 kW. Because the toroidal field is 5 {approx} 8 kG, the RF system`s output power is about 10 kW and frequency range is 7 {approx} 30 MHz. In the first year, a 1 kW RF preamplifier was bought. In this year, a CW 2 kW RF main amp. and RF power monitoring system was bought. In the research on antenna, we study the method how to measure electric field emitted from antenna using piezo elements. The matching network composed of two VVC (35 kV), 100 {approx} 1000 pF match firmly up to 50 kW power. We studied the measurement method of antenna impedance theoretically, and measured power efficiency and antenna impedance in the helicon plasma. 32 refs., 5 tabs., 29 figs. (author)
Microwave scattering study of the ion cyclotron wave during plasma heating in the Tokamaks
International Nuclear Information System (INIS)
Mialet, Bernadette.
1980-06-01
Microwave scattering measurements have been carried out to analyse the ion cyclotron wave structure during ICRH heating in a Tokamak. In order to study the eventual conversion of the fast magnetosonic wave into a slow wave near the two-ion hybrid resonance, experiments were performed in a deuterium plasmas with hydrogen added as a dopant. Also, the region of the poloidal plane located between the two ion hybrid resonance layer and the ion cyclotron resonance surface (ω = ωsub(CH) = 2 ωsub(CD)) has been particularly investigated. Indeed, slow modes are supposed to exist and to experience ion cyclotron and electron Landau damping in this region. The frequency analysis of the power scattered by the electron density fluctuations reveals a forced oscillation regime. The poloidal wave number spectrum allows to identify a fast wave (K(perp.) approximately 1cm -1 approximately 4π/a, where a is the plasma radius), and, for high plasma density (n(0) approximately 1.2 x 10 14 cm -3 ) a slow wave (K(perp.) approximately 5/7 cm -1 ) at a weaker level [fr
International Nuclear Information System (INIS)
Dudok de Wit, Th.; Duval, B.P.; Joye, B.; Lister, J.B.; Moret, J.M.
1989-01-01
The energy transport mechanisms that govern the electron temperature behaviour of a tokamak remain very badly understood and up to now no proper model has been proposed that can explain experimental observations such as profile consistency or the influence of the density profile. One approach to this problem, extensively used on TCA, is to study the dynamical response of the plasma due to externally imposed modifications of parameters which have an influence on the plasma energy content. The temporal evolution of the electron temperature will closely depend on the type and the characteristics of the implied mechanisms. Thus a detailed measurement of the dynamical response would reveal experimentally the dominant properties that would have to be taken into account in the elaboration of a model of the transport processes. Most of the results presented here were obtained by analysing the electron temperature response inferred from soft X-ray emissivity during modification of the plasma density due to either gas puffing, laser impurity ablation or alfven wave heating on TCA (a = 0.18 m, R = 0.61 m, B Φ = 1.52 T). 4 refs., 3 figs
Study on the plasma transport in the T-10 tokamak using deuterium single pulse feed
International Nuclear Information System (INIS)
Vasin, N.L.; Vershkov, V.A.; Zhuravlev, V.A.
1984-01-01
The experimental data and the results of simulation of a plasma density profile at low pulse feed of a working gas in two modes of the T-10 tokamak with average electron density anti n sub(e)=3.5x10 13 cm -3 , plasma current 220 kA and various values of the longitudinal magnetic field Hsub(Z). For the first mode Hsub(Z) constituted 15 koE for the second one - 30 koE. Combined consideration of electron density profile at the stationary discharge stage and profile evolution dynamics at pulse feed permitted to estimate pinch velocity of a plasma. The diffusion and pinch velocity coefficients in this method to a considerable extent are determined by their parametric dependences. The calculations during feed with the constant diffusion coefficients and pinching velocities as well as with the diffusion coefficient varying inversely proportional to n sub(e) are presented. It is shown that in the low magnetic field mode the pinch velocity values for the medium regions of a filament do not contradict neoclassical values. At the same time in the high magnetic field mode for explaining the n sub(e) growth dynamics the pinch velocity value exceeding the neoclassical value more than by the order value
Pellet injection into ohmically and additionally electron cyclotron resonance heated tokamak plasmas
International Nuclear Information System (INIS)
Drawin, H.W.; Geraud, A.
1988-12-01
Frozen H 2 and D 2 pellets injection into the electron cyclotron resonance heated plasmas of the Fontenay-aux-Roses tokamak are studied. Pellet injection with and without ECR heating are considered. In the first case, pellets penetration into the plasma is deeper than the neutral gas model predictions. In the second case, the position of the ECR layer had practically no influence on the penetration depth (reduced to a few centimeters). Only two-third of the pellet mass was found as ionized matter in the plasma, compared to the ohmic case. On the photographs the ablation clouds showed no particular structure when ECR heating was applied. Also the H β intensity was generally free of modulation. The enhanced ablation during ECRH can be simulated by a Parks and Turnbull formula. Perpendicular electron temperature of the hot electrons heated by the EC waves is by orders of magnitude larger than its parallel temperature. The resulting electron density profiles calculated by using the 1-D transport code MAKOKOT are in agreement with experiments, when suitable values of the anomalous radial convection velocity are chosen
Plasma Profile and Shape Optimization for the Advanced Tokamak Power Plant, ARIES-AT
International Nuclear Information System (INIS)
Kessel, C.E.; Mau, T.K.; Jardin, S.C.; Najmabadi, F.
2001-01-01
An advanced tokamak plasma configuration is developed based on equilibrium, ideal-MHD stability, bootstrap current analysis, vertical stability and control, and poloidal-field coil analysis. The plasma boundaries used in the analysis are forced to coincide with the 99% flux surface from the free-boundary equilibrium. Using an accurate bootstrap current model and external current-drive profiles from ray-tracing calculations in combination with optimized pressure profiles, beta(subscript N) values above 7.0 have been obtained. The minimum current drive requirement is found to lie at a lower beta(subscript N) of 5.4. The external kink mode is stabilized by a tungsten shell located at 0.33 times the minor radius and a feedback system. Plasma shape optimization has led to an elongation of 2.2 and triangularity of 0.9 at the separatrix. Vertical stability could be achieved by a combination of tungsten shells located at 0.33 times the minor radius and feedback control coils located behind the shield. The poloidal-field coils were optimized in location and current, providing a maximum coil current of 8.6 MA. These developments have led to a simultaneous reduction in the power plant major radius and toroidal field
International Nuclear Information System (INIS)
Kardon, B.; Soltwitsch, H.; Waidmann, G.
1987-07-01
On the basis of a method developed by Zakharov and Shafranov for the determination of the plasma cross section in toroidal geometry two special pick-up coils for the two components of the poloidal magnetic field were built. A cosine coil of higher order and a saddle coil were designed and installed outside the plasma column. The proper sum of these two signals permits the evaluation of the first momentum of the plasma current which is the equilibrium plasma displacement. The horizontal position of the plasma column was controlled on-line by the TEXTOR feedback system using this analog sum signal. (orig.)
Energy Technology Data Exchange (ETDEWEB)
Odstrcil, Tomas
2017-07-03
In this thesis, the transport of tungsten ions is studied in the plasma of ASDEX Upgrade tokamak. The plasma facing components of the fusion reactors are expected to be built from high-Z materials such as W, Mo or Fe. These materials provide advantages like a high melting point, small erosion rates, and low tritium retention. However, due to the interaction of the plasma with the wall, ions of this material will be inevitably present also in the main plasma. These ions are not entirely stripped even at fusion plasma temperatures, and therefore emit strong line radiation, which can significantly degrade the performance of the fusion plasma. Thus the understanding and control of impurity transport are of critical importance to the success of fusion. The high mass and charge of the heavy impurities make them susceptible to some of the forces acting upon the plasma, resulting in a poloidal variation of their density. The most prominent are the centrifugal force arising from the plasma rotation and the electric force caused by magnetically trapped non-thermal ions. Furthermore, the poloidal asymmetries should have a significant impact on the radial transport of heavy ions, which was widely ignored up to date. In the present work, the poloidal asymmetries in the heavy impurity density were inferred from the soft X-ray radiation using a newly developed tomographic method. The high accuracy of the tomography and of the model for the centrifugal force allowed to identify for the first time in an experiment the effect of the fast ion distribution produced by neutral beam injection on the poloidal asymmetry of the tungsten density. The measured asymmetry was compared to several fast ion models, and the best match was found with the Monte Carlo code in the TRANSP code suite that includes finite orbits effects of the fast ions. Similarly, fast ions accelerated by ion cyclotron heating and localized mainly in the outboard side of the plasma due to a magnetic trapping and produce
Tokamak fusion reactor exhaust
International Nuclear Information System (INIS)
Harrison, M.F.A.; Harbour, P.J.; Hotston, E.S.
1981-08-01
This report presents a compilation of papers dealing with reactor exhaust which were produced as part of the TIGER Tokamak Installation for Generating Electricity study at Culham. The papers are entitled: (1) Exhaust impurity control and refuelling. (2) Consideration of the physical problems of a self-consistent exhaust and divertor system for a long burn Tokamak. (3) Possible bundle divertors for INTOR and TIGER. (4) Consideration of various magnetic divertor configurations for INTOR and TIGER. (5) A appraisal of divertor experiments. (6) Hybrid divertors on INTOR. (7) Refuelling and the scrape-off layer of INTOR. (8) Simple modelling of the scrape-off layer. (9) Power flow in the scrape-off layer. (10) A model of particle transport within the scrape-off plasma and divertor. (11) Controlled recirculation of exhaust gas from the divertor into the scrape-off plasma. (U.K.)
Experimental study of the interaction between RF antennas and the edge plasma of a tokamak
International Nuclear Information System (INIS)
Kubic, Martin
2013-01-01
Antennas operating in the ion cyclotron range of frequency (ICRF) provide a useful tool for plasma heating in many tokamaks and are foreseen to play an important role in ITER. However, in addition to the desired heating in the core plasma, spurious interactions with the plasma edge and material boundary are known to occur. Many of these deleterious effects are caused by the formation of radio-frequency (RF) sheaths. The aim of this thesis is to study, mainly experimentally, scrape-off layer (SOL) modifications caused by RF sheaths effects by means of Langmuir probes that are magnetically connected to a powered ICRH antenna. Effects of the two types of Faraday screens' operation on RF-induced SOL modifications are studied for different plasma and antenna configurations - scans of strap power ratio imbalance, injected power and SOL density. In addition to experimental work, the influence of RF sheaths on retarding field analyzer (RFA) measurements of sheath potential is investigated with one-dimensional particle-in-cell code. One-dimensional particle-in-cell simulations show that the RFA is able to measure reliably the sheath potential only for ion plasma frequencies ω π similar to RF cyclotron frequency ω rf , while for the real SOL conditions (ω π ≥ ω rf ), when the RFA is magnetically connected to RF region, it is strongly underestimated. An alternative method to investigate RF sheaths effects is proposed by using broadening of the ion distribution function as an evidence of the RF electric fields in the sheath. RFA measurements in Tore Supra indicate that RF potentials do indeed propagate from the antenna 12 m along magnetic field lines. (author) [fr
Forthcoming Break-Even Conditions of Tokamak Plasma Performance for Fusion Energy Development
Hiwatari, Ryoji; Okano, Kunihiko; Asaoka, Yoshiyuki; Tokimatsu, Koji; Konishi, Satoshi; Ogawa, Yuichi
The present study reveals forthcoming break-even conditions of tokamak plasma performance for the fusion energy development. The first condition is the electric break-even condition, which means that the gross electric power generation is equal to the circulating power in a power plant. This is required for fusion energy to be recognized as a suitable candidate for an alternative energy source. As for the plasma performance (normalized beta value ΒN), confinement improvement factor for H-mode HH, the ratio of plasma density to Greenwald density fnGW), the electric break-even condition requires the simultaneous achievement of 1.2 market. By using a long-term world energy scenario, a break-even price for introduction of fusion energy in the year 2050 is estimated to lie between 65 mill/kWh and 135 mill/kWh under the constraint of 550 ppm CO2 concentration in the atmosphere. In the present study, this break-even price is applied to the economic break-even condition. However, because this break-even price is based on the present energy scenario including uncertainties, the economic break-even condition discussed here should not be considered the sufficient condition, but a necessary condition. Under the conditions of Btmax = 16 T, ηe = 40 %, plant availability 60 %, and a radial build with/without CS coil, the economic break-even condition requires ΒN ˜ 5.0 for 65 mill/kWh of lower break-even price case. Finally, the present study reveals that the demonstration of steady-state operation with ΒN ˜ 3.0 in the ITER project leads to the upper region of the break-even price in the present world energy scenario, which implies that it is necessary to improve the plasma performance beyond that of the ITER advanced plasma operation.
Energy Technology Data Exchange (ETDEWEB)
Meslin, B
1998-04-30
Plasma density control on the tokamak Tore Supra is important for the optimization of every experimental scenario dealing with the improvement of plasma performances. Specific conditions are required both in the plasma bulk and at the edge. Within the framework of the present study, a magnetic configuration is used in the e plasma edge of Tore Supra: the ergodic divertor configuration. A magnetic perturbation which is resonant with the permanent field destroys the plasma confinement locally, opening the field lines onto the material components. They aim of the study is the characterization of the edge density in every relevant scenario for Tore Supra. The first part of this work is dedicated to density and temperature measurements by a series of fixed Langmuir probes located at the very edge of the plasma. Thanks to them, density regimes have been put in evidence during experiments where the volume averaged density
Energy Technology Data Exchange (ETDEWEB)
Dong, Haijie; Yuan, Zhensheng; Yuan, Hongwei; Pei, Cuixiang [State Key Laboratory for Strength and Vibration of Mechanical Structures, Shanxi Engineering Research Center for NDT and Structural Integrity Evaluation Xi’an Jiaotong University, Xi’an 710049 (China); Chen, Zhenmao, E-mail: chenzm@mail.xjtu.edu.cn [State Key Laboratory for Strength and Vibration of Mechanical Structures, Shanxi Engineering Research Center for NDT and Structural Integrity Evaluation Xi’an Jiaotong University, Xi’an 710049 (China); Yang, Jinhong; Wang, Weihua [Institute of Applied Physics of AOA, Hefei 230031 (China)
2016-11-01
In this paper, the dynamic response during plasma disruption of a test blanket module in vacuum vessel (VV) of the Joint TEXT (J-TEXT), which is an experimental Tokamak device with iron core, was simulated by applying a program developed by authors on the ANSYS platform using its parametric design language (APDL). The moving coordinate method as well as the load transfer and sequential coupling strategy were adopted to cope with the electromagneto-mechanical coupling effect. To establish the numerical model, the influence of the iron core on the eddy current and electromagnetic (EM) force during disruption was numerically investigated at first and the influence was found not significant. Together with the geometrical features of the J-TEXT Tokamak structure, 180° sector models without magnetic core were finally established for the EM field and the structural response simulations. To obtain the source plasma current, the plasma current evolution during disruption was simulated by using the Tokamak Simulation Code (TSC). With the numerical models and the source plasma current, the dynamic response of both the VV structure and the test module were calculated. The numerical results show that the maximum stress of the test module is in safe range, and the magnetic damping effect can weaken vibration of the test module. In addition, simulation without considering the coupling effect was carried out, which shows that the influence of coupling effect is not significant for the peak stress of the J-TEXT disruption problem.
Development of fast video recording of plasma interaction with a lithium limiter on T-11M tokamak
Energy Technology Data Exchange (ETDEWEB)
Lazarev, V.B., E-mail: v_lazarev@triniti.ru [SSC RF TRINITI Troitsk, Moscow (Russian Federation); Dzhurik, A.S.; Shcherbak, A.N. [SSC RF TRINITI Troitsk, Moscow (Russian Federation); Belov, A.M. [NRC “Kurchatov Institute”, Moscow (Russian Federation)
2016-11-15
Highlights: • The paper presents the results of the study of tokamak plasma interaction with lithium capillary-porous system limiters and PFC by high-speed color camera. • Registration of emission near the target in SOL in neutral lithium light and e-folding length for neutral Lithium measurements. • Registration of effect of MHD instabilities on CPS Lithium limiter. • A sequence of frames shows evolution of lithium bubble on the surface of lithium limiter. • View of filament structure near the plasma edge in ohmic mode. - Abstract: A new high-speed color camera with interference filters was installed for fast video recording of plasma-surface interaction with a Lithium limiter on the base of capillary-porous system (CPS) in T-11M tokamak vessel. The paper presents the results of the study of tokamak plasma interaction (frame exposure time up to 4 μs) with CPS Lithium limiter in a stable stationary phase, unstable regimes with internal disruption and results of processing of the image of the light emission around the probe, i.e. e-folding length for neutral Lithium penetration and e-folding length for Lithium ion flux in SOL region.
Shestakov, E. A.; Savrukhin, P. V.
2017-10-01
Experiments in the T-10 tokamak demonstrated possibility of controlling the plasma current during disruption instability using the electron cyclotron resonance heating (ECRH) and the controlled operation of the ohmic current-holding system. Quasistable plasma discharge with repeating sawtooth oscillations can be restored after energy quench using auxiliary ECRH power when PEC / POH > 2–5. The external magnetic field generation system consisted of eight saddle coils that were arranged symmetrically relative to the equatorial plane of the torus outside of the vacuum vessel of the T-10 tokamak to study the possible resonant magnetic field effects on the rotation frequency of magnetic islands. The saddle coils power supply system is based on four thyristor converters with a total power of 300 kW. The power supply control system is based on Siemens S7 controllers. As shown by preliminary experiments, the interaction efficiency of external magnetic fields with plasma depends on the plasma magnetic configuration. Optimal conditions for slowing the rotation of magnetic islands were determined. Additionally, the direction of the error magnetic field in the T-10 tokamak was determined, and the threshold value of the external magnetic field was determined.
International Nuclear Information System (INIS)
Behn, R.; Salito, S.A.; Siegrist, M.R.; Dicken, D.; Hackmann, J.
1988-10-01
A D 2 O FIR laser emitting 0.5 J in 1.4 μs at 385 μm and a heterodyne receiver system comprising a Schottky barrier diode mixer with a noise temperature of 8000 K (DSB) were used in a Thomson scattering experiment to measure the ion temperature of a tokamak plasma during a single laser shot. Series of measurements under reproducible plasma conditions have been carried out in H, D and He-plasmas. Their statistical analysis yielded a typical relative error of 25 % for a single shot measurement. (author) 9 figs., 2 tabs., 7 refs
Czech Academy of Sciences Publication Activity Database
Dimitrova, Miglena; Popov, Tsv.K.; Adámek, Jiří; Kovačič, J.; Ivanova, P.; Hasan, E.; López-Bruna, D.; Seidl, Jakub; Vondráček, Petr; Dejarnac, Renaud; Stöckel, Jan; Imríšek, Martin; Pánek, Radomír
2017-01-01
Roč. 59, č. 12 (2017), č. článku 125001. ISSN 0741-3335 R&D Projects: GA ČR(CZ) GA15-10723S; GA MŠk(CZ) LM2015045 Institutional support: RVO:61389021 Keywords : Plasma potential * electron temperature * bi-Maxwellian EEDF * ball-pen probe * Langmuir probe * COMPASS tokamak * last closed flux surface Subject RIV: BL - Plasma and Gas Discharge Physics OBOR OECD: Fluids and plasma physics (including surface physics) Impact factor: 2.392, year: 2016
International Nuclear Information System (INIS)
Diem, S. J.; Caughman, J. B.; Taylor, G.; Efthimion, P. C.; Kugel, H.; LeBlanc, B. P.; Phillips, C. K.; Preinhaelter, J.; Urban, J.; Sabbagh, S. A.
2009-01-01
The first experimental verification of electron Bernstein wave (EBW) collisional damping, and its mitigation by evaporated Li conditioning, in an overdense spherical-tokamak plasma has been observed in the National Spherical Torus Experiment (NSTX). Initial measurements of EBW emission, coupled from NSTX plasmas via double-mode conversion to O-mode waves, exhibited <10% transmission efficiencies. Simulations show 80% of the EBW energy is dissipated by collisions in the edge plasma. Li conditioning reduced the edge collision frequency by a factor of 3 and increased the fundamental EBW transmission to 60%.
International Nuclear Information System (INIS)
Xiao-Yuan, Xu; Jun, Wang; Yi, Yu; Yi-Zhi, Wen; Chang-Xuan, Yu; Wan-Dong, Liu; Bao-Nian, Wan; Xiang, Gao; Luhmann, N. C.; Domier, C. W.; Wang, Jian; Xia, Z. G.; Shen, Zuowei
2009-01-01
The fluctuation of the electron temperature has been measured by using the electron cyclotron emission imaging in the Hefei Tokamak-7 (HT-7) plasma. The electron temperature fluctuation with a broadband spectrum shows that it propagates in the electron diamagnetic drift direction, and the mean poloidal wave-number k-bar θ is calculated to be about 1.58 cm −1 , or k-bar θρ s thickapprox 0.34. It indicates that the fluctuation should come from the electron drift wave turbulence. The linear global scaling of the electron temperature fluctuation with the gradient of electron temperature is consistent with the mixing length scale qualitatively. Evolution of spectrum of the fluctuation during the sawtooth oscillation phases is investigated, and the fluctuation is found to increase with the gradient of electron temperature increasing during most phases of the sawtooth oscillation. The results indicate that the electron temperature gradient is probably the driver of the fluctuation enhancement. The steady heat flux driven by electron temperature fluctuation is estimated and compared with the results from power balance estimation. (fluids, plasmas and electric discharges)
Transport analysis of high radiation and high density plasmas in the ASDEX Upgrade tokamak
Directory of Open Access Journals (Sweden)
Casali L.
2014-01-01
Full Text Available Future fusion reactors, foreseen in the “European road map” such as DEMO, will operate under more demanding conditions compared to present devices. They will require high divertor and core radiation by impurity seeding to reduce heat loads on divertor target plates. In addition, DEMO will have to work at high core densities to reach adequate fusion performance. The performance of fusion reactors depends on three essential parameters: temperature, density and energy confinement time. The latter characterizes the loss rate due to both radiation and transport processes. The DEMO foreseen scenarios described above were not investigated so far, but are now addressed at the ASDEX Upgrade tokamak. In this work we present the transport analysis of such scenarios. Plasma with high radiation by impurity seeding: transport analysis taking into account the radiation distribution shows no change in transport during impurity seeding. The observed confinement improvement is an effect of higher pedestal temperatures which extend to the core via stiffness. A non coronal radiation model was developed and compared to the bolometric measurements in order to provide a reliable radiation profile for transport calculations. High density plasmas with pellets: the analysis of kinetic profiles reveals a transient phase at the start of the pellet fuelling due to a slower density build up compared to the temperature decrease. The low particle diffusion can explain the confinement behaviour.
International Nuclear Information System (INIS)
Park, G.; Chang, C. S.; Joseph, I.; Moyer, R. A.
2010-01-01
A kinetic transport simulation for the first 4 ms of the vacuum resonant magnetic perturbations (RMPs) application has been performed for the first time in realistic diverted DIII-D tokamak geometry [J. Luxon, Nucl. Fusion 42, 614 (2002)], with the self-consistent evaluation of the radial electric field and the plasma rotation. It is found that, due to the kinetic effects, the stochastic parallel thermal transport is significantly reduced when compared to the standard analytic model [A. B. Rechester and M. N. Rosenbluth, Phys. Rev. Lett. 40, 38 (1978)] and the nonaxisymmetric perpendicular radial particle transport is significantly enhanced from the axisymmetric level. These trends agree with recent experimental result trends [T. E. Evans, R. A. Moyer, K. H. Burrell et al., Nat. Phys. 2, 419 (2006)]. It is also found, as a side product, that an artificial local reduction of the vacuum RMP fields in the vicinity of the magnetic separatrix can bring the kinetic simulation results to a more detailed agreement with experimental plasma profiles.
Development of burning plasma and advanced scenarios in the DIII-D tokamak
International Nuclear Information System (INIS)
Luce, T.C.
2005-01-01
Significant progress in the development of burning plasma scenarios, steady-state scenarios at high fusion performance, and basic tokamak physics has been made by the DIII-D Team. Discharges similar to the ITER baseline scenario have demonstrated normalized fusion performance nearly 50% higher than required for Q = 10 in ITER, under stationary conditions. Discharges that extrapolate to Q ∼ 10 for longer than one hour in ITER at reduced current have also been demonstrated in DIII-D under stationary conditions. Proof of high fusion performance with full noninductive operation has been obtained. Underlying this work are studies validating approaches to confinement extrapolation, disruption avoidance and mitigation, tritium retention, ELM avoidance, and operation above the no-wall pressure limit. In addition, the unique capabilities of the DIII-D facility have advanced studies of the sawtooth instability with unprecedented time and space resolution, threshold behavior in the electron heat transport, and rotation in plasmas in the absence of external torque. (author)
Radiation-hardened x-ray imaging for burning-plasma tokamaks
Séguin, Fredrick H.; Petrasso, Richard D.; Li, Chi Kang
1997-01-01
A special type of vacuum-photodiode detector is being developed for x-ray imaging of plasma in fusion-producing tokamaks such as the international thermonuclear experimental reactor (ITER), where the radiation environment will be too hostile for conventional x-ray detectors. The vacuum photodiode has modest efficiency, but it is intrinsically immune to radiation damage if built in such a manner as to expose only metal components to radiation. A design based on appropriately chosen materials (including high-Z cathodes) and geometries (including a small angle between cathode surface and incident x rays) can provide good signals from the 1-100 keV x rays that are of particular importance for imaging the plasmas in the Joint European Torus (JET) and ITER. It should also provide better rejection of signal distortion and noise due to unwanted detection of neutrons and hard gamma rays than conventional detectors. A prototype design is described, along with performance parameters predicted for JET and ITER. In addition, we show results of laboratory experiments that confirm some of the predicted behaviors of the design.
Energy Technology Data Exchange (ETDEWEB)
Semerok, A., E-mail: alexandre.semerok@cea.fr [CEA, DEN, DPC/SEARS/LISL, F-91191 Gif-sur-Yvette (France); Grisolia, C. [CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France)
2013-08-21
Feasibility of in situ LIBS remote measurements with the plasma facing components (PFCs) from the European tokamaks (TORE SUPRA, CEA Cadarache, France and TEXTOR, Julich, Germany) has been studied in laboratory using Q-switched nanosecond Nd–YAG lasers. LIBS particular properties and optimal parameters were determined for in-depth PFCs characterisation. The LIBS method was in situ tested on the Joint European Torus (JET) in the UK with the EDGE LIDAR Laser System (Ruby laser, 3 J, 690 nm wavelength, 300 ps pulse duration, intensity up to 70 GW/cm{sup 2}). Several analytical spectral lines of H, CII, CrI, and BeII in plasma were observed and identified in 400–600 nm spectral range with the optimised LIBS and detection system. The LIBS in-depth cartography is in agreement with the surface properties of the tile under analysis, thus confirming feasibility of in situ LIBS. Further LIBS technique improvements required to provide tritium concentration measurements more accurately are discussed.
International Nuclear Information System (INIS)
Semerok, A.; Grisolia, C.
2013-01-01
Feasibility of in situ LIBS remote measurements with the plasma facing components (PFCs) from the European tokamaks (TORE SUPRA, CEA Cadarache, France and TEXTOR, Julich, Germany) has been studied in laboratory using Q-switched nanosecond Nd–YAG lasers. LIBS particular properties and optimal parameters were determined for in-depth PFCs characterisation. The LIBS method was in situ tested on the Joint European Torus (JET) in the UK with the EDGE LIDAR Laser System (Ruby laser, 3 J, 690 nm wavelength, 300 ps pulse duration, intensity up to 70 GW/cm 2 ). Several analytical spectral lines of H, CII, CrI, and BeII in plasma were observed and identified in 400–600 nm spectral range with the optimised LIBS and detection system. The LIBS in-depth cartography is in agreement with the surface properties of the tile under analysis, thus confirming feasibility of in situ LIBS. Further LIBS technique improvements required to provide tritium concentration measurements more accurately are discussed
Plasma loading and wave generation for ICRH in the ST Tokamak
International Nuclear Information System (INIS)
Adam, J.; Getty, W.D.; Hooke, W.M.; Hosea, J.C.; Sinclair, R.M.
1974-01-01
Plasma loading and wave generation for two half-turn loops operating at 25 MHz are being investigated on the ST Tokamak at power levels up to 1 MW. The equivalent series resistance R/sub s/ = P/sub rf//I 2 /sub rf/, measured as a function of Ω = ω/ω/sub ci/(r = 0) and plasma density, is found to be in good agreement with the predictions of the cylindrical theory. R/sub s/ values as high as several ohms are obtained at high densities giving wave generation efficiencies well above 90 percent. Loading near Ω = 1 and 2 is apparently independent of power level. Measurements of B/sub zrf/ at 20 locations about the torus reveal the predicted wave generation; m = 0, +1 slow waves in the vicinity of Ω = 1, m = -1 fast waves after the expected onset (usually Ω greater than or equal to 1), and m = 0, +1 fast waves for higher Ω. Toroidal eigenmodes accompanied by large loading are detected for the fast waves when the damping lengths are long
Dependence of ideal MHD kink and ballooning modes on plasma shape and profiles in tokamaks
Energy Technology Data Exchange (ETDEWEB)
Todd, A.M.M.; Manickam, J.; Okabayashi, M.; Chance, M.S.; Grimm, R.C.; Greene, J.M.; Johnson, J.L.
1978-08-01
Extensive numerical studies of ideal MHD instabilities have been carried out to gain insight into the parametric dependence of critical ..beta..'s in tokamaks. The large number of interrelated equilibrium quantities involved in establishing a critical ..beta.. has demanded a careful, systematic survey in order to isolate this dependence. The results of this survey establish the scaling with geometrical quantities including aspect ratio, elongation, and triangularity in the parameter regimes appropriate for both current and reactor-sized plasmas. A moderate dependence on the pressure profile and a strong variation with the current profile is found. The principal result is that for aspect ratio R/a approximately equal to 3, critical ..beta..'s are of the order of 2% for circular cross sections and 5% for plasmas with elongation K approximately equal to 2; somewhat higher values could be achieved with more optimal shaping. Finally, sequences of equilibria have been analyzed to compare critical ..beta.. as a function of toroidal mode number n. We conclude that the infinite-n analytic ballooning theory provides a sufficient condition for ideal MHD internal mode stability. Low-n free boundary modes appear to set a lower limit.
Analysis of time-dependent particle transport in the tokamak boundary plasma
Rognlien, T. D.; Groebner, R. J.; Nam, S. K.
2010-11-01
Plasma particle transport in the edge and scrape-off layer of tokamaks is not well understood but is important for core fueling, helium removal, and impurity intrusion. A simple 1D model is presented to clarify the time-dependent impact of different possible mechanisms including penetration and ionization of recycled or injected neutrals, and plasma diffusion and convection. More detail of edge profile dynamics between Edge-Localized-Modes (ELMs) corresponding to re-building of the pedestal region is studied with the 2D UEDGE transport code. The influence of the ion pinch associated with perpendicular ion viscosity is evaluated. It is assumed that during quasi-steady-state discharges with regularly-spaced bursts of Edge Localized Modes (ELMs), the net pumping of all walls and pumps averaged over an ELM cycle is just sufficient to remove the small neutral beam particle source. The simulation results are then compared with similar time-dependent data for DIII-D edge density profiles between ELMs.
Stefan, V. Alexander
2012-10-01
A novel plasma diagnostic method is proposed based on the synergy of stimulated Raman and Brillouin scatterings. A nonlinear plasma mode is excited in a 4-wave coupling,footnotetextV. Alexander STEFAN, Nonlinear Electromagnetic Radiation Plasma Interactions, (S-U-Press, 2008). leading to the appearance of suprathermal electrons and accelerated ions at the plasma edgefootnotetextV. Alexander Stefan, Abstract: D1.00018 : ITER Plasma at Electron Cyclotron Frequency Domain: Stimulated Raman Scattering off Gould-Trivelpiece Modes and Generation of Suprathermal Electrons and Energetic Ions; Bulletin of the American Physical Society APS April Meeting 2011 Volume 56, Number 4. with the parameters directly dependent on the plasma parameters in the core of tokamak. Accordingly, plasma diagnostic in the core region, (ion temperature), can be performed by the diagnostics of suprathermal electrons and accelerated ions at the edge plasma.
Transport and confinement in the Mega Ampere Spherical Tokamak (MAST) plasma
International Nuclear Information System (INIS)
Akers, R J; Ahn, J W; Antar, G Y; Appel, L C; Applegate, D; Brickley, C; Bunting, C; Carolan, P G; Challis, C D; Conway, N J; Counsell, G F; Dendy, R O; Dudson, B; Field, A R; Kirk, A; Lloyd, B; Meyer, H F; Morris, A W; Patel, A; Roach, C M; Rohzansky, V; Sykes, A; Taylor, D; Tournianski, M R; Valovic, M; Wilson, H R; Axon, K B; Buttery, R J; Ciric, D; Cunningham, G; Dowling, J; Dunstan, M R; Gee, S J; Gryaznevich, M P; Helander, P; Keeling, D L; Knight, P J; Lott, F; Loughlin, M J; Manhood, S J; Martin, R; McArdle, G J; Price, M N; Stammers, K; Storrs, J; Walsh, M J
2003-01-01
A combination of recently installed state-of-the-art imaging and profile diagnostics, together with established plasma simulation codes, are providing for the first time on Mega Ampere Spherical Tokamak (MAST) the tools required for studying confinement and transport, from the core through to the plasma edge and scrape-off-layer (SOL). The H-mode edge transport barrier is now routinely turned on and off using a combination of poloidally localized fuelling and fine balancing of the X-points. Theory, supported by experiment, indicates that the edge radial electric field and toroidal flow velocity (thought to play an important role in H-mode access) are largest if gas fuelling is concentrated at the inboard side. H-mode plasmas show predominantly type III ELM characteristics, with confinement H H factor (w.r.t. scaling law IPB98[y, 2]) around approx. 1.0. Combining MAST H-mode data with the International Tokamak Physics Activities (ITPA) analyses, results in an L-H power threshold scaling proportional to plasma surface area (rather than P LH approx. R 2 ). In addition, MAST favours an inverse aspect ratio scaling P LH approx. epsilon 0.5. Similarly, the introduction of type III ELMing H-mode data to the pedestal energy regression analysis introduces a scaling W ped approx. epsilon -2.13 and modifies the exponents on R, B T and Kappa. Preliminary TRANSP simulations indicate that ion and electron thermal diffusivities in ELMing H-mode approach the ion-neoclassical level in the half-radius region of the plasma with momentum diffusivity a few times lower. Linear flux-tube ITG and ETG microstability calculations using GS2 offer explanations for the near-neoclassical ion diffusivity and significantly anomalous electron diffusivity seen on MAST. To complement the baseline quasi-steady-state H-mode, newly developed advanced regimes are being explored. In particular, 'broad' internal transport barriers (ITBs) have been formed using techniques developed at conventional aspect
Energy Technology Data Exchange (ETDEWEB)
Mantsinen, M. [Helsinki Univ. of Technology, Espoo (Finland). Dept. of Technical Physics
1999-06-01
Heating with electromagnetic waves in the ion cyclotron range of frequencies (ICRF) is a well-established method for auxiliary heating of present-day tokamak plasmas and is envisaged as one of the main heating techniques for the International Thermonuclear Experimental Reactor (ITER) and future reactor plasmas. In order to predict the performance of ICRF heating in future machines, it is important to benchmark present theoretical modelling with experimental results on present tokamaks. This thesis reports on development and experimental evaluation of theoretical models for ICRF heating at the Joint European Torus (JET). Several ICRF physics effects and scenarios have been studied. Direct importance to the ITER is the theoretical analysis of ICRF heating experiments with deuterium-tritium (D-T) plasmas. These experiments clearly demonstrate the potential of ICRF heating for auxiliary heating of reactor plasmas. In particular, scenarios with potential for good bulk ion heating and enhanced D-T fusion reactivity have been identified. Good bulk ion heating is essential for reactor plasmas in order to obtain a high ion temperature and a high fusion reactivity. In JET good bulk ion heating with ICRF waves has been achieved in high-performance discharges by adding ICRF heating to neutral beam injection. In these experiments, as in other JET discharges where damping at higher harmonics of the ion cyclotron frequency takes place, so-called finite Larmor radius (FLR) effects play an important role. Due to FLR effects, the resonating ion velocity distribution function can have a strong influence on the power deposition. Evidence for this effect has been obtained from the third harmonic deuterium heating experiments. Because of FLR effects, the wave-particle interaction can also become weak at certain ion energies, which prevents resonating ions from reaching higher energies. When interacting with the wave, an ion receives not only a change in energy but also a change in
I.R. and F.I.R. laser polarimetry as a diagnostic tool in high-β and Tokamak plasmas
International Nuclear Information System (INIS)
Pereira, D.; Machida, M.; Scalabrin, A.
1986-01-01
The change of the polarization state of an electromagnetic wave (E.M.W.) propagating across a magnetized plasma may be used to determine plasma parameters. In a plasma machine of the Tokamak type, the Faraday rotation of the E.M.W. allows for the determination of the product of the plasma electronic density by the poloidal magnetic field. A novel optical configuration which permits simultaneous measurements of these two parameters without the use of an auxiliary interferometric set up is proposed. By choosing appropriate laser wave length this method can be used in Tokamaks (lambda >= 1mm) and also in theta-Pinches plasmas (lambda approx. 10μm). The application of these results is discussed to plasma machines now in operation in Brazil, like the Tokamak/USP and theta-Pinch/UNICAMP, using lasers developed at UNICAMP. (Author) [pt
International Nuclear Information System (INIS)
Asakura, Nobuyuki
2007-01-01
Significant progress has been made in understanding the driving mechanisms in SOL mass transport along the magnetic field lines (SOL flow). SOL flow measurements by Mach probes and impurity plume have been performed in L-mode plasma at various poloidal locations in divertor tokamaks. All results showed common SOL flow patterns: subsonic flow with parallel Mach number (M parallel ) of 0.2-1 was generated from the Low-Field-Side (LFS) SOL to the High-Field-Side (HFS) divertor for the ion ∇B drift towards the divertor. The SOL flow pattern was formed mainly by LFS-enhanced asymmetry in diffusion and by classical drifts. In addition, divertor detachment and/or intense puffing-and-pump enhanced the HFS SOL flow. Most codes have incorporated drift effects, and asymmetric diffusion was modelled to simulate the fast SOL flow. Influences of the fast SOL flow on the impurity flow in the SOL, shielding from core plasma, and deposition profile, were directly observed in experiments
International Nuclear Information System (INIS)
Rondan, E.R.; Elfimov, A.G.; Galvao, R.M.O.; Pires, C.J.A.
2006-01-01
The effect of plasma rotation on low frequency (LF) field penetration, absorption and ponderomotive forces in TEXTOR and in Tokamak Chauffage Alfven Bresilien (TCABR) is investigated in the frequency band of 1-10 kHz. The LF fields are driven by the dynamic ergodic divertor in TEXTOR and the ergodic magnetic limiter in TCABR. Alfven wave mode conversion is responsible for the LF field absorption at the rational magnetic surface where q = -M/N is the integer. Analytical and numerical calculations show the maxima of the LF field absorption at the local Alfven wave resonance ω - k · U = k parallel c A , where ω and k are the frequency and the wave vector, respectively, and c A is the Alfven velocity at the rational magnetic surface q = 2, 3 in TEXTOR and TCABR. The rotation velocity U along the magnetic surfaces, taken into account in the dielectric tensor, can strongly modify the LF field and dissipated power profiles. The absorption in the local AW resonances begins to be non-symmetric in relation to the resonance surface. Calculations show that coil impedance has a maximum related to excitation of some stable (possibly Suydam) modes for waves travelling in the direction of plasma rotation
Fully non-inductive second harmonic electron cyclotron plasma ramp-up in the QUEST spherical tokamak
Idei, H.; Kariya, T.; Imai, T.; Mishra, K.; Onchi, T.; Watanabe, O.; Zushi, H.; Hanada, K.; Qian, J.; Ejiri, A.; Alam, M. M.; Nakamura, K.; Fujisawa, A.; Nagashima, Y.; Hasegawa, M.; Matsuoka, K.; Fukuyama, A.; Kubo, S.; Shimozuma, T.; Yoshikawa, M.; Sakamoto, M.; Kawasaki, S.; Nakashima, H.; Higashijima, A.; Ide, S.; Maekawa, T.; Takase, Y.; Toi, K.
2017-12-01
Fully non-inductive second (2nd) harmonic electron cyclotron (EC) plasma current ramp-up was demonstrated with a newlly developed 28 GHz system in the QUEST spherical tokamak. A high plasma current of 54 kA was non-inductively ramped up and sustained stably for 0.9 s with a 270 kW 28 GHz wave. A higher plasma current of 66 kA was also non-inductively achieved with a slow ramp-up of the vertical field. We have achieved a significantly higher plasma current than those achieved previously with the 2nd harmonic EC waves. This fully non-inductive 2nd harmonic EC plasma ramp-up method might be useful for future burning plasma devices and fusion reactors, in particular for operations at half magnetic field with the same EC heating equipment.
International Nuclear Information System (INIS)
Reid, R.L.; Barrett, R.J.; Brown, T.G.
1985-03-01
The FEDC Tokamak Systems Code calculates tokamak performance, cost, and configuration as a function of plasma engineering parameters. This version of the code models experimental tokamaks. It does not currently consider tokamak configurations that generate electrical power or incorporate breeding blankets. The code has a modular (or subroutine) structure to allow independent modeling for each major tokamak component or system. A primary benefit of modularization is that a component module may be updated without disturbing the remainder of the systems code as long as the imput to or output from the module remains unchanged
Suprathermal electron studies in Tokamak plasmas by means of diagnostic measurements and modeling
International Nuclear Information System (INIS)
Kamleitner, J.
2015-01-01
To achieve reactor-relevant conditions in a tokamak plasma, auxiliary heating systems are required and can be realized by waves injected in the plasma that heat ions or electrons. Electron cyclotron resonant heating (ECRH) is a very flexible and robust technique featuring localized power deposition and current drive (CD) capabilities. Its fundamental principles are well understood and the application of ECRH is a proven and established tool; electron cyclotron current drive (ECCD) is regularly used to develop advanced scenarios and control magneto-hydrodynamics (MHD) instabilities in the plasma by tailoring the current profile. There remain important open questions, such as the phase space dynamics, the observed radial broadening of the supra-thermal electron distribution function and discrepancies in predicted and experimental CD efficiency. A main goal is to improve the understanding of wave-particle interaction in plasmas and current drive mechanisms. This was accomplished by combined experimental and numerical studies, strongly based on the conjunction of hard X-ray (HXR) Bremsstrahlung measurements and Fokker-Planck modelling, characterizing the supra-thermal electron population. The hard X-ray tomographic spectrometer (HXRS) diagnostic was developed to perform these studies by investigating spatial HXR emission asymmetries in the co- and counter-current directions and within the poloidal plane. The system uses cadmium-telluride detectors and digital acquisition to store the complete time history of incoming photon pulses. An extensive study of digital pulse processing algorithms was performed and its application allows the HXRS to handle high count rates in a noisy tokamak environment. Numerical tools were developed to improve the time resolution by conditional averaging and to obtain local information with the general tomographic inversion package. The interfaces of the LUKE code and the well-established CQL3D Fokker-Planck code to the Tokamak a
Suprathermal electron studies in Tokamak plasmas by means of diagnostic measurements and modeling
Energy Technology Data Exchange (ETDEWEB)
Kamleitner, J.
2015-07-01
To achieve reactor-relevant conditions in a tokamak plasma, auxiliary heating systems are required and can be realized by waves injected in the plasma that heat ions or electrons. Electron cyclotron resonant heating (ECRH) is a very flexible and robust technique featuring localized power deposition and current drive (CD) capabilities. Its fundamental principles are well understood and the application of ECRH is a proven and established tool; electron cyclotron current drive (ECCD) is regularly used to develop advanced scenarios and control magneto-hydrodynamics (MHD) instabilities in the plasma by tailoring the current profile. There remain important open questions, such as the phase space dynamics, the observed radial broadening of the supra-thermal electron distribution function and discrepancies in predicted and experimental CD efficiency. A main goal is to improve the understanding of wave-particle interaction in plasmas and current drive mechanisms. This was accomplished by combined experimental and numerical studies, strongly based on the conjunction of hard X-ray (HXR) Bremsstrahlung measurements and Fokker-Planck modelling, characterizing the supra-thermal electron population. The hard X-ray tomographic spectrometer (HXRS) diagnostic was developed to perform these studies by investigating spatial HXR emission asymmetries in the co- and counter-current directions and within the poloidal plane. The system uses cadmium-telluride detectors and digital acquisition to store the complete time history of incoming photon pulses. An extensive study of digital pulse processing algorithms was performed and its application allows the HXRS to handle high count rates in a noisy tokamak environment. Numerical tools were developed to improve the time resolution by conditional averaging and to obtain local information with the general tomographic inversion package. The interfaces of the LUKE code and the well-established CQL3D Fokker-Planck code to the Tokamak a
Non-inductive plasma initiation and plasma current ramp-up on the TST-2 spherical tokamak
International Nuclear Information System (INIS)
Takase, Y.; Ejiri, A.; Oosako, T.; Shinya, T.; Ambo, T.; Furui, H.; Kato, K.; Nakanishi, A.; Sakamoto, T.; Kakuda, H.; Wakatsuki, T.; Hashimoto, T.; Hiratsuka, J.; Kasahara, H.; Kumazawa, R.; Mutoh, T.; Saito, K.; Seki, T.; Moeller, C.P.; Nagashima, Y.
2013-01-01
Plasma current (I p ) start-up in a spherical tokamak (ST) by waves in the lower-hybrid (LH) frequency range was investigated on TST-2. A low current (∼1 kA) ST configuration can be formed by waves over a broad frequency range (21 MHz–8.2 GHz in TST-2), but further I p ramp-up (to ∼10 kA) is most efficient with waves in the LH frequency range. I p ramp-up to 15 kA was achieved with 60 kW of net RF power P RF in the fast wave (FW) polarization at 200 MHz excited by the inductively coupled combline antenna. X-ray measurements showed that the photon flux and temperature are higher in the direction opposite to I p , consistent with acceleration of electrons by a uni-directional RF wave. There is evidence that the LH wave is excited nonlinearly by the FW, based on the frequency spectra measured by magnetic probes. Similar efficiencies of I p ramp-up were obtained with the inductive combline antenna and the dielectric-loaded waveguide array (‘grill’) antenna, and tendencies for the current drive efficiency to increase with plasma current and toroidal field were observed. During operation of the grill antenna, wavevector components were measured by an array of magnetic probes. Results were qualitatively consistent with expectations based on dispersion relations for the FW and the LH wave. A capacitively coupled combline antenna has been developed to improve coupling to the plasma and the wavenumber spectrum of the excited LH wave, and will be tested in 2013. (paper)
Creating poloidal flux in a tokamak plasma with low frequency waves
International Nuclear Information System (INIS)
Kirkwood, R.K.; Capewell, D.L.; Bellan, P.M.
1993-01-01
Using a fully toroidal, collisionless, low frequency model, we show that low amplitude, circularly polarized waves can, depending on antenna geometry (i) drive the toroidal EMF necessary to sustain a tokamak reactor, or (ii) shift the internal current profile. Measurements on a small tokamak to test (ii) agree with the model predictions. (orig.)
International Nuclear Information System (INIS)
Xu, G.S.; Wan, B.N.; Song, M.
2002-01-01
Langmuir probes have been used to measure the electrostatic Reynolds stress and the floating potential fluctuation in the boundary plasma of the Hefei Tokamak-7 (HT-7) [J. Li, B. N. Wan, and J. S. Mao, Plasma Phys. Controlled Fusion 42, 135 (2000)]. The cross bispectrum of r V(tilde sign) θ φ(tilde sign) f > indicates the existence of difference-frequency nonlinear phase coupling and the generation of fluctuations near the geodesic acoustic mode frequency. The inverse cascade process might be linked to the generation of zonal flows by small-scale electrostatic drift-wave turbulence
Czech Academy of Sciences Publication Activity Database
Komm, Michael; Dejarnac, Renaud; Gunn, J. P.; Pekarek, Z.
2013-01-01
Roč. 55, č. 2 (2013), 025006-025006 ISSN 0741-3335 R&D Projects: GA ČR GA202/09/1467; GA ČR GAP205/11/2341; GA MŠk(CZ) LM2011021 Institutional support: RVO:61389021 Keywords : plasma * tokamak * PIC divertor * castellation gaps Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 2.386, year: 2013 http://iopscience.iop.org/0741-3335/55/2/025006/pdf/0741-3335_55_2_025006.pdf
Forthcoming break-even conditions of tokamak plasma performance for fusion energy development
International Nuclear Information System (INIS)
Hiwatari, Ryoji; Okano, Kunihiko; Asaoka, Yoshiyuki; Tokimatsu, Koji; Konishi, Satoshi; Ogawa, Yuichi
2005-01-01
The present study reveals forthcoming break-even conditions of tokamak plasma performance for the fusion energy development. The first condition is the electric break-even condition, which means that the gross electric power generation is equal to the circulating power in a power plant. This is required for fusion energy to be recognized as a suitable candidate for an alternative energy source. As for the plasma performance (normalized beta value β N , confinement improvement factor for H-mode HH, the ratio of plasma density to Greenwald density fn GW ), the electric break-even condition requires the simultaneous achievement of 1.2 N GW tmax =16 T, thermal efficiency η e =30%, and current drive power P NBI N ∼1.8, HH≠1.0, and fn GW ∼0.9, which correspond to the ITER reference operation parameters, have a strong potential to achieve the electric break-even condition. The second condition is the economic break-even condition, which is required for fusion energy to be selected as an alternative energy source in the energy market. By using a long-term world energy scenario, a break-even price for introduction of fusion energy in the year 2050 is estimated to lie between 65 mill/kWh and 135 mill/kWh under the constraint of 550 ppm CO 2 concentration in the atmosphere. In the present study, this break-even price is applied to the economic break-even condition. However, because this break-even price is based on the present energy scenario including uncertainties, the economic break-even condition discussed here should not be considered the sufficient condition, but a necessary condition. Under the conditions of B tmax =16 T, η e =40%, plant availability 60%, and a radial build with/without CS coil, the economic break-even condition requires β N ∼5.0 for 65 mill/kWh of lower break-even price case. Finally, the present study reveals that the demonstration of steady-state operation with β N ∼3.0 in the ITER project leads to the upper region of the break
Science Court on ICRH [ion cyclotron resonance heating] modeling of tokamak plasmas
International Nuclear Information System (INIS)
Hively, L.M.; Sadowski, W.L.
1987-10-01
The Applied Plasma Physics (APP) Theory program in the Office of Fusion Energy is charged with supporting the development of advanced physics models for fusion research. One such effort is ion cyclotron resonance heating (ICRH), which has seen substantial progress recently. However, due to serious questions about the adequacy of present models for CIT (Compact Ignition Tokamak), a Science Court was formed to assess ICRH models, including: validity of theoretical and computational approximations; underlying physics assumptions and corresponding limits on the results; self-consistency; any subsidiary issues needing resolution (e.g., new computer tools); adequacy of the models in simulating experiments (especially CIT); and new or improved experiments to validate and refine the models. The Court did not review work by specific individuals, institutions, or programs, thereby avoiding any biases along these lines. Rather, the Science Court was carefully structured as a technical review of ICRH theory and modeling in the US. This paper discusses the Science Court process, findings, and conclusions