WorldWideScience

Sample records for tmacs version description

  1. TMACS system description

    International Nuclear Information System (INIS)

    Scaief, C.C.

    1995-01-01

    This document provides a description of the Tank Monitor and Control System (TMACS). It is intended as an introduction for those persons unfamiliar with the system as well as a reference document for the users, maintenance personnel, and system designers. In addition to describing the system, the document outlines the associated drawing documentation, provides maintenance and spare parts information, and discusses other TMACS documents that provide additional detail

  2. TMACS Test Procedure TP011: Panalarm Interface

    International Nuclear Information System (INIS)

    Seghers, R.; Washburn, S.J.

    1994-01-01

    The TMACS Software Test Procedures translate the project's acceptance criteria into test steps. The TMACS Test Plan (WHC-SD-WM-TP-148) is fulfilled when all Test Cases are approved. This Test Procedure tests the TMACS Panalarm Interface functions

  3. TMACS Test Procedure TP009: Acromag Driver

    International Nuclear Information System (INIS)

    Washburn, S.J.

    1994-01-01

    The TMACS Software Project Test Procedures translate the project's acceptance criteria into test steps. Software releases are certified when the affected Test Procedures are successfully performed and the customers authorize installation of these changes. This Test Procedure tests the TMACS Acromag Software Driver (Bridge Code)

  4. TMACS Test Procedure TP007: System administration

    International Nuclear Information System (INIS)

    Scanlan, P.; Washburn, S.; Seghers, R.

    1994-01-01

    The TMACS Software Project Test Procedures translate the project's acceptance criteria into test steps. Software releases are certified when the affected Test Procedures are successfully performed and the customers authorize installation of these changes. This Test Procedure tests the TMACS System Administration functions

  5. TMACS Test Procedure TP002: Trending

    International Nuclear Information System (INIS)

    Scanlan, P.K.

    1994-01-01

    The TMACS Software Project Test Procedures translate the project's acceptance criteria into test steps. Software releases are certified when the affected Test Procedures are successfully performed and the customers authorize installation of these changes. This Test Procedure tests the TMACS Trending functions

  6. TMACS I/O termination point listing. Revision 1

    International Nuclear Information System (INIS)

    Scaief, C.C. III.

    1994-01-01

    This document provides a listing of all analog and discrete input/output (I/O) points connected to the Tank Monitor and Control System (TMACS). The list also provides other information such as the point tag name, termination location, description, drawing references and other parameters. The purpose is to define each point's unique tag name and to cross reference the point with other associated information that may be necessary for activities such as maintenance, calibration, diagnostics, or design changes. It provides a list in one document of all I/O points that would otherwise only be available by referring to all I/O termination drawings

  7. TMACS I/O termination point listing. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Scaief, C.C. III

    1994-09-13

    This document provides a listing of all analog and discrete input/output (I/O) points connected to the Tank Monitor and Control System (TMACS). The list also provides other information such as the point tag name, termination location, description, drawing references and other parameters. The purpose is to define each point`s unique tag name and to cross reference the point with other associated information that may be necessary for activities such as maintenance, calibration, diagnostics, or design changes. It provides a list in one document of all I/O points that would otherwise only be available by referring to all I/O termination drawings.

  8. Forsmark - site descriptive model version 0

    International Nuclear Information System (INIS)

    2002-10-01

    During 2002, the Swedish Nuclear Fuel and Waste Management Company (SKB) is starting investigations at two potential sites for a deep repository in the Precambrian basement of the Fennoscandian Shield. The present report concerns one of those sites, Forsmark, which lies in the municipality of Oesthammar, on the east coast of Sweden, about 150 kilometres north of Stockholm. The site description should present all collected data and interpreted parameters of importance for the overall scientific understanding of the site, for the technical design and environmental impact assessment of the deep repository, and for the assessment of long-term safety. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. The site descriptive models are devised and stepwise updated as the site investigations proceed. The point of departure for this process is the regional site descriptive model, version 0, which is the subject of the present report. Version 0 is developed out of the information available at the start of the site investigation. This information, with the exception of data from tunnels and drill holes at the sites of the Forsmark nuclear reactors and the underground low-middle active radioactive waste storage facility, SFR, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. For this reason, the Forsmark site descriptive model, version 0, as detailed in the present report, has been developed at a regional scale. It covers a rectangular area, 15 km in a southwest-northeast and 11 km in a northwest-southeast direction, around the

  9. Forsmark - site descriptive model version 0

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-10-01

    During 2002, the Swedish Nuclear Fuel and Waste Management Company (SKB) is starting investigations at two potential sites for a deep repository in the Precambrian basement of the Fennoscandian Shield. The present report concerns one of those sites, Forsmark, which lies in the municipality of Oesthammar, on the east coast of Sweden, about 150 kilometres north of Stockholm. The site description should present all collected data and interpreted parameters of importance for the overall scientific understanding of the site, for the technical design and environmental impact assessment of the deep repository, and for the assessment of long-term safety. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. The site descriptive models are devised and stepwise updated as the site investigations proceed. The point of departure for this process is the regional site descriptive model, version 0, which is the subject of the present report. Version 0 is developed out of the information available at the start of the site investigation. This information, with the exception of data from tunnels and drill holes at the sites of the Forsmark nuclear reactors and the underground low-middle active radioactive waste storage facility, SFR, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. For this reason, the Forsmark site descriptive model, version 0, as detailed in the present report, has been developed at a regional scale. It covers a rectangular area, 15 km in a southwest-northeast and 11 km in a northwest-southeast direction, around the

  10. Simpevarp - site descriptive model version 0

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-11-01

    During 2002, SKB is starting detailed investigations at two potential sites for a deep repository in the Precambrian rocks of the Fennoscandian Shield. The present report concerns one of those sites, Simpevarp, which lies in the municipality of Oskarshamn, on the southeast coast of Sweden, about 250 kilometres south of Stockholm. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. SKB maintains two main databases at the present time, a site characterisation database called SICADA and a geographic information system called SKB GIS. The site descriptive model will be developed and presented with the aid of the SKB GIS capabilities, and with SKBs Rock Visualisation System (RVS), which is also linked to SICADA. The version 0 model forms an important framework for subsequent model versions, which are developed successively, as new information from the site investigations becomes available. Version 0 is developed out of the information available at the start of the site investigation. In the case of Simpevarp, this is essentially the information which was compiled for the Oskarshamn feasibility study, which led to the choice of that area as a favourable object for further study, together with information collected since its completion. This information, with the exception of the extensive data base from the nearby Aespoe Hard Rock Laboratory, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. Against this background, the present report consists of the following components: an overview of the present content of the databases

  11. Simpevarp - site descriptive model version 0

    International Nuclear Information System (INIS)

    2002-11-01

    During 2002, SKB is starting detailed investigations at two potential sites for a deep repository in the Precambrian rocks of the Fennoscandian Shield. The present report concerns one of those sites, Simpevarp, which lies in the municipality of Oskarshamn, on the southeast coast of Sweden, about 250 kilometres south of Stockholm. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. SKB maintains two main databases at the present time, a site characterisation database called SICADA and a geographic information system called SKB GIS. The site descriptive model will be developed and presented with the aid of the SKB GIS capabilities, and with SKBs Rock Visualisation System (RVS), which is also linked to SICADA. The version 0 model forms an important framework for subsequent model versions, which are developed successively, as new information from the site investigations becomes available. Version 0 is developed out of the information available at the start of the site investigation. In the case of Simpevarp, this is essentially the information which was compiled for the Oskarshamn feasibility study, which led to the choice of that area as a favourable object for further study, together with information collected since its completion. This information, with the exception of the extensive data base from the nearby Aespoe Hard Rock Laboratory, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. Against this background, the present report consists of the following components: an overview of the present content of the databases

  12. Tank Monitoring and Control System (TMACS) Acceptance Test Procedure

    Energy Technology Data Exchange (ETDEWEB)

    BARNES, D.A.

    2000-06-01

    The purpose of this document is to describe tests performed to validate Revision 12.0 of the TMACS Monitor and Control System (TMACS) and verify that the software functions as intended by design. This document is intended to test the software portion of TMACS. The tests will be performed on the development system. The software to be tested is the TMACS knowledge bases (KB) and the I/O driver/services. The development system will not be communicating to field equipment; instead, the field equipment is simulated using emulators or multiplexers in the lab.

  13. Tank monitor and control system (TMACS) software configuration management plan

    International Nuclear Information System (INIS)

    GLASSCOCK, J.A.

    1999-01-01

    This Software Configuration Management Plan (SCMP) describes the methodology for control of computer software developed and supported by the Systems Development and Integration (SD and I) organization of Lockheed Martin Services, Inc. (LMSI) for the Tank Monitor and Control System (TMACS). This plan controls changes to the software and configuration files used by TMACS. The controlled software includes the Gensym software package, Gensym knowledge base files developed for TMACS, C-language programs used by TMACS, the operating system on the production machine, language compilers, and all Windows NT commands and functions which affect the operating environment. The configuration files controlled include the files downloaded to the Acromag and Westronic field instruments

  14. Tank Monitoring and Control System (TMACS) Acceptance Test Procedure

    International Nuclear Information System (INIS)

    BARNES, D.A.

    2000-01-01

    The purpose of this document is to describe tests performed to validate Revision 12.0 of the TMACS Monitor and Control System (TMACS) and verify that the software functions as intended by design. This document is intended to test the software portion of TMACS. The tests will be performed on the development system. The software to be tested is the TMACS knowledge bases (KB) and the I/O driver/services. The development system will not be communicating to field equipment; instead, the field equipment is simulated using emulators or multiplexers in the lab

  15. TMACS Test Procedure TP008: SACS Interface. Revision 5

    International Nuclear Information System (INIS)

    Washburn, S.J.

    1994-01-01

    The TMACS Software Project Test Procedures translate the project's acceptance criteria into test steps. Software releases are certified when the affected Test Procedures are successfully performed and the customers authorize installation of these changes. This Test Procedure tests the TMACS SACS Interface functions

  16. Tank Monitoring and Control System (TMACS) Acceptance Test Procedure

    International Nuclear Information System (INIS)

    HOLM, M.J.

    1999-01-01

    This document is intended to test the software portion of TMACS. The tests will be performed on the development system. The software to be tested is the TMACS knowledge bases (KB) and the I/O driver devices. The development system will not be talking to field equipment; instead, the field equipment is simulated using emulators or multiplexers in the lab

  17. TMACS Test Procedure TP010: Integration summary. Revision 5

    International Nuclear Information System (INIS)

    Spurling, D.G.

    1994-01-01

    The TMACS Soft Project Test Procedures translate the project's acceptance criteria into test steps. Software releases are certified when the affected Test Procedures are successfully performed and the customers authorize installation of these changes

  18. TMACS test procedure TP001: Alarm management. Revision 6

    International Nuclear Information System (INIS)

    Scanlan, P.K.

    1994-01-01

    The TMACS Software Project Test Procedures translate the project's acceptance criteria into test steps. Software releases are certified when the affected Test Procedures are successfully performed and the customers authorize installation of these changes. This Test Procedure addresses the Alarm Management requirements of the TMACS. The features to be tested are: real-time alarming on high and low level and discrete alarms, equipment alarms, dead-band filtering, alarm display color coding, alarm acknowledgement, and alarm logging

  19. TMACS test procedure TP003: Graphics. Revision 5

    International Nuclear Information System (INIS)

    Scanlan, P.K.

    1994-01-01

    The TMACS Software Project Test Procedures translate the project's acceptance criteria into test steps. Software releases are certified when the affected Test Procedures are successfully performed and the customers authorize installation of these changes. This Test Procedure addresses the graphics requirements of the TMACS. The features to be tested are the data display graphics and the graphic elements that provide for operator control and selection of displays

  20. TMACS test procedure TP003: Graphics. Revision 6

    International Nuclear Information System (INIS)

    Scanlan, P.K.; Washburn, S.

    1994-01-01

    The TMACS Software Project Test Procedures translate the project's acceptance criteria into test steps. Software releases are certified when the affected Test Procedures are successfully performed and the customers authorize installation of these changes. This Test Procedure addresses the graphics requirements of the TMACS. The features to be tested are the data display graphics and the graphic elements that provide for operator control and selection of displays

  1. TMACS test procedure TP010: Integration summary. Revision 6

    International Nuclear Information System (INIS)

    Spurling, D.G.

    1994-01-01

    The TMACS Software Project Test Procedures translate the project's acceptance criteria into test steps. Software releases are certified when the affected Test Procedures are successfully performed and the customers authorize installation of these changes. This Test Procedure verifies that Test Procedures 1, 2, 3, 5 and 9 (WHC-SD-WM-TRP-105, 106, 107, 109 and 113) of TMACS Software Release 4.1 have been successfully completed

  2. Rock Visualization System. Technical description (RVS version 3.8)

    Energy Technology Data Exchange (ETDEWEB)

    Curtis, P.; Elfstroem, M.; Markstroem, I. [Golder Associates AB (Sweden)

    2007-06-15

    The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. The report describes RVS version 4.0. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples. Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carry out a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system.

  3. Rock Visualization System. Technical description (RVS version 3.8)

    Energy Technology Data Exchange (ETDEWEB)

    Curtis, P.; Elfstroem, M.; Markstroem, I. [FB Engineering, Goeteborg (Sweden)

    2005-04-01

    The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. The report describes RVS version 3.8. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples. Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carryout a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system.

  4. Description of surface systems. Preliminary site description Simpevarp sub area - Version 1.2

    International Nuclear Information System (INIS)

    Lindborg, Tobias

    2005-03-01

    Swedish Nuclear Fuel and Waste Management Co is currently conducting site characterisation in the Simpevarp area. The area is divided into two subareas, the Simpevarp and the Laxemar subarea. The two subareas are surrounded by a common regional model area, the Simpevarp area. This report describes both the regional area and the subareas. This report is an interim version (model version 1.2) of the description of the surface systems at the Simpevarp area, and should be seen as a background report to the site description of the Simpevarp area, version 1.2, SKB-R--05-08. The basis for this description is quality-assured field data available in the SKB SICADA and GIS databases, together with generic data from the literature. The Surface system, here defined as everything above the bedrock, comprises a number of separate disciplines (e.g. hydrology, geology, topography, oceanography and ecology). Each discipline has developed descriptions and models for a number of properties that together represent the site description. The current methodology for developing the surface system description and the integration to ecosystem models is documented in a methodology strategy report SKB-R--03-06. The procedures and guidelines given in that report were followed in this report. Compared with version 1.1 of the surface system description SKB-R--04-25, this report presents considerable additional features, especially in the ecosystem description (Chapter 4) and in the description of the surface hydrology (Section 3.4). A first attempt has also been made to connect the flow of matter (carbon) between the different ecosystems into an overall ecosystem model at a landscape level. A summarised version of this report is also presented in SKB-R--05-08 together with geological-, hydrogeological-, transport properties-, thermal properties-, rock mechanics- and hydrogeochemical descriptions

  5. Description of surface systems. Preliminary site description Simpevarp sub area - Version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Lindborg, Tobias (ed.)

    2005-03-01

    Swedish Nuclear Fuel and Waste Management Co is currently conducting site characterisation in the Simpevarp area. The area is divided into two subareas, the Simpevarp and the Laxemar subarea. The two subareas are surrounded by a common regional model area, the Simpevarp area. This report describes both the regional area and the subareas. This report is an interim version (model version 1.2) of the description of the surface systems at the Simpevarp area, and should be seen as a background report to the site description of the Simpevarp area, version 1.2, SKB-R--05-08. The basis for this description is quality-assured field data available in the SKB SICADA and GIS databases, together with generic data from the literature. The Surface system, here defined as everything above the bedrock, comprises a number of separate disciplines (e.g. hydrology, geology, topography, oceanography and ecology). Each discipline has developed descriptions and models for a number of properties that together represent the site description. The current methodology for developing the surface system description and the integration to ecosystem models is documented in a methodology strategy report SKB-R--03-06. The procedures and guidelines given in that report were followed in this report. Compared with version 1.1 of the surface system description SKB-R--04-25, this report presents considerable additional features, especially in the ecosystem description (Chapter 4) and in the description of the surface hydrology (Section 3.4). A first attempt has also been made to connect the flow of matter (carbon) between the different ecosystems into an overall ecosystem model at a landscape level. A summarised version of this report is also presented in SKB-R--05-08 together with geological-, hydrogeological-, transport properties-, thermal properties-, rock mechanics- and hydrogeochemical descriptions.

  6. Preliminary site description Forsmark area - version 1.1

    International Nuclear Information System (INIS)

    2004-03-01

    This report presents the interim version (model version 1.1) of the preliminary Site Descriptive Model for Forsmark. The basis for this interim version is quality-assured, geoscientific and ecological field data from Forsmark that were available in the SKB databases SICADA and GIS at April 30, 2003 as well as version 0 of the Site Descriptive Model. The new data acquired during the initial site investigation phase to the date of data freeze 1.1 constitute the basis for the updating of version 0 to version 1.1. These data originate from surface investigations on the candidate area with its regional environment and from drilling and investigations in boreholes. The surface-based data sets were rather extensive whereas the data sets from boreholes were limited to information from one 1,000 m deep cored borehole (KFM01A) and eight 150 to 200 m deep percussion-drilled boreholes in the Forsmark candidate area. Discipline specific models are developed for a selected regional and local model volume and these are then integrated into a site description. The current methodologies for developing the discipline specific models and the integration of these are documented in methodology reports or strategy reports. In the present work, the guidelines given in those reports were followed to the extent possible with the data and information available at the time for data freeze for model version 1.1. Compared with version 0 there are considerable additional features in the version 1.1, especially in the geological description and in the description of the near surface. The geological models of lithology and deformation zones are based on borehole information and much higher resolution surface data. The existence of highly fractured sub-horizontal zones has been verified and these are now part of the model of the deformation zones. A discrete fracture network (DFN) model has also been developed. The rock mechanics model is based on strength information from SFR and an empirical

  7. Tank Monitoring and Control System (TMACS) Acceptance Test Procedure

    International Nuclear Information System (INIS)

    WANDLING, R.R.

    1999-01-01

    The purpose of this document is to describe tests performed to validate Revision 11.2 of the TMACS Monitor and Control System (TMCACS) and verify that the software functions as intended by design. The tests will be performed on the development system. The software to be tested is the TMACS knowledge bases (KB) and the I/O driver/services. The development system will not be talking to field equipment; instead, the field equipment is simulated using emulators or multiplexers in the lab

  8. Preliminary site description Forsmark area - version 1.1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-03-01

    This report presents the interim version (model version 1.1) of the preliminary Site Descriptive Model for Forsmark. The basis for this interim version is quality-assured, geoscientific and ecological field data from Forsmark that were available in the SKB databases SICADA and GIS at April 30, 2003 as well as version 0 of the Site Descriptive Model. The new data acquired during the initial site investigation phase to the date of data freeze 1.1 constitute the basis for the updating of version 0 to version 1.1. These data originate from surface investigations on the candidate area with its regional environment and from drilling and investigations in boreholes. The surface-based data sets were rather extensive whereas the data sets from boreholes were limited to information from one 1,000 m deep cored borehole (KFM01A) and eight 150 to 200 m deep percussion-drilled boreholes in the Forsmark candidate area. Discipline specific models are developed for a selected regional and local model volume and these are then integrated into a site description. The current methodologies for developing the discipline specific models and the integration of these are documented in methodology reports or strategy reports. In the present work, the guidelines given in those reports were followed to the extent possible with the data and information available at the time for data freeze for model version 1.1. Compared with version 0 there are considerable additional features in the version 1.1, especially in the geological description and in the description of the near surface. The geological models of lithology and deformation zones are based on borehole information and much higher resolution surface data. The existence of highly fractured sub-horizontal zones has been verified and these are now part of the model of the deformation zones. A discrete fracture network (DFN) model has also been developed. The rock mechanics model is based on strength information from SFR and an empirical

  9. Description of surface systems. Preliminary site description. Forsmark area Version 1.2

    International Nuclear Information System (INIS)

    Lindborg, Tobias

    2005-06-01

    Swedish Nuclear Fuel and Waste Management Co (SKB) started site investigations for a deep repository for spent nuclear fuel in 2002 at two different sites in Sweden, Forsmark and Oskarshamn. The investigations should provide necessary information for a license application aimed at starting underground exploration. For this reason, ecosystem data need to be interpreted and assessed into site descriptive models, which in turn are used for safety assessment studies and for environmental impact assessment. Descriptions of the surface system are also needed for further planning of the site investigations. This report describes the surface ecosystems of the Forsmark site (e.g. hydrology, Quaternary deposits, chemistry, vegetation, animals and the human land use). The ecosystem description is an integration of the site and its regional setting, covering the current state of the biosphere as well as the ongoing natural processes affecting the longterm development. Improving the descriptions is important during both the initial and the complete site investigation phase. Before starting of the initial phase in Forsmark, version 0 of the site descriptive model was developed. The results of the initial site investigation phase is compiled into a preliminary site description of Forsmark (version 1.2) in June 2005. This report provides the major input and background to the biosphere description, in the 1.2 version of the Forsmark site description. The basis for this interim version is quality-assured field data from the Forsmark sub area and regional area, available in the SKB SICADA, and GIS data bases as of July 31th 2004 as well as version 1.1 of the Site Descriptive Model. To achieve an ecosystem site description there is a need to develop discipline-specific models by interpreting and analysing primary data. The different discipline-specific models are then integrated into a system describing interactions and flows and stocks of matter between and within functional units in

  10. Description of surface systems. Preliminary site description. Forsmark area Version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Lindborg, Tobias (ed.)

    2005-06-01

    Swedish Nuclear Fuel and Waste Management Co (SKB) started site investigations for a deep repository for spent nuclear fuel in 2002 at two different sites in Sweden, Forsmark and Oskarshamn. The investigations should provide necessary information for a license application aimed at starting underground exploration. For this reason, ecosystem data need to be interpreted and assessed into site descriptive models, which in turn are used for safety assessment studies and for environmental impact assessment. Descriptions of the surface system are also needed for further planning of the site investigations. This report describes the surface ecosystems of the Forsmark site (e.g. hydrology, Quaternary deposits, chemistry, vegetation, animals and the human land use). The ecosystem description is an integration of the site and its regional setting, covering the current state of the biosphere as well as the ongoing natural processes affecting the longterm development. Improving the descriptions is important during both the initial and the complete site investigation phase. Before starting of the initial phase in Forsmark, version 0 of the site descriptive model was developed. The results of the initial site investigation phase is compiled into a preliminary site description of Forsmark (version 1.2) in June 2005. This report provides the major input and background to the biosphere description, in the 1.2 version of the Forsmark site description. The basis for this interim version is quality-assured field data from the Forsmark sub area and regional area, available in the SKB SICADA, and GIS data bases as of July 31th 2004 as well as version 1.1 of the Site Descriptive Model. To achieve an ecosystem site description there is a need to develop discipline-specific models by interpreting and analysing primary data. The different discipline-specific models are then integrated into a system describing interactions and flows and stocks of matter between and within functional units in

  11. Preliminary site description. Simpevarp area - version 1.1

    International Nuclear Information System (INIS)

    Winberg, Anders

    2004-08-01

    Site characterisation in the Oskarshamn area is currently conducted at two adjoining localities, the Simpevarp and Laxemar subareas. This report presents the interim version (model version Simpevarp 1.1 of S1.1 for short) of the preliminary Site Descriptive Model for the Simpevarp subarea. The basis for this interim version is quality-assured, geoscientific and ecological field data from the Simpevarp subarea (and in part from the Laxemar area) available in the SKB SICADA and GIS data bases as of July 1, 2003 as well as version 0 of the Site Descriptive Model. The new data collected during the initial site investigation phase up till the date of data freeze S1.1 constitute the basis for the update of version 0 to version S1.1. These data include results from surface investigations in the subarea with its regional environment and from drillings and investigations in boreholes. The surface-based data sets were, in a relative sense, extensive compared with data sets from boreholes, were the information largely was limited to information from one c. 1,000 m deep cored borehole (KSH01A), two existing cored boreholes and three c. 200 m deep percussion-drilled boreholes. Discipline-specific models are developed for the selected regional and local model volumes and these models are subsequently integrated into a unified site description. The current methodologies for developing discipline-specific models and their integration are documented in methodology/ strategy reports. In the present work, the procedures and guidelines given in those reports were followed to the extent possible given the data and information available at the time of data freeze for model version S1.1. Compared with version 0 there are considerable additional features in the version S1.1, especially in the geological description and in the description of the near surface. The geological models of lithology and deformation zones are based on borehole information and surface data of much higher

  12. TMACS test procedure TP012: Panalarm software bridge

    International Nuclear Information System (INIS)

    Washburn, S.J.

    1994-01-01

    This Test Procedure addresses the testing of the functionality of the Tank Monitor and Control System (TMACS) Panalarm bridge software. The features to be tested are: Bridge Initialization Options; Bridge Communication; Bridge Performance; Testing Checksum Errors; and Testing Command Reject Errors. Only the first three could be tested; the last two have been deferred to a later date

  13. Preliminary site description. Simpevarp area - version 1.1

    Energy Technology Data Exchange (ETDEWEB)

    Winberg, Anders (ed.)

    2004-08-01

    Site characterisation in the Oskarshamn area is currently conducted at two adjoining localities, the Simpevarp and Laxemar subareas. This report presents the interim version (model version Simpevarp 1.1 of S1.1 for short) of the preliminary Site Descriptive Model for the Simpevarp subarea. The basis for this interim version is quality-assured, geoscientific and ecological field data from the Simpevarp subarea (and in part from the Laxemar area) available in the SKB SICADA and GIS data bases as of July 1, 2003 as well as version 0 of the Site Descriptive Model. The new data collected during the initial site investigation phase up till the date of data freeze S1.1 constitute the basis for the update of version 0 to version S1.1. These data include results from surface investigations in the subarea with its regional environment and from drillings and investigations in boreholes. The surface-based data sets were, in a relative sense, extensive compared with data sets from boreholes, were the information largely was limited to information from one c. 1,000 m deep cored borehole (KSH01A), two existing cored boreholes and three c. 200 m deep percussion-drilled boreholes. Discipline-specific models are developed for the selected regional and local model volumes and these models are subsequently integrated into a unified site description. The current methodologies for developing discipline-specific models and their integration are documented in methodology/ strategy reports. In the present work, the procedures and guidelines given in those reports were followed to the extent possible given the data and information available at the time of data freeze for model version S1.1. Compared with version 0 there are considerable additional features in the version S1.1, especially in the geological description and in the description of the near surface. The geological models of lithology and deformation zones are based on borehole information and surface data of much higher

  14. Preliminary site description Forsmark area - version 1.2

    International Nuclear Information System (INIS)

    Skagius, Kristina

    2005-06-01

    The Swedish Nuclear Fuel and Waste Management Company (SKB) is undertaking site characterisation at two different locations, the Forsmark and Simpevarp areas, with the objective of siting a geological repository for spent nuclear fuel. An integrated component in the characterisation work is the development of a site descriptive model that constitutes a description of the site and its regional setting, covering the current state of the geosphere and the biosphere as well as those ongoing natural processes that affect their long-term evolution. The present report documents the site descriptive modelling activities (version 1.2) for the Forsmark area. The overall objectives of the version 1.2 site descriptive modelling are to produce and document an integrated description of the site and its regional environments based on the site-specific data available from the initial site investigations and to give recommendations on continued investigations. The modelling work is based on primary data, i.e. quality-assured, geoscientific and ecological field data available in the SKB databases SICADA and GIS, available July 31, 2004. The work has been conducted by a project group and associated discipline-specific working groups. The members of the project group represent the disciplines of geology, rock mechanics, thermal properties, hydrogeology, hydrogeochemistry, transport properties and surface ecosystems (including overburden, surface hydrogeochemistry and hydrology). In addition, some group members have specific qualifications of importance in this type of project e.g. expertise in RVS (Rock Visualisation System) modelling, GIS-modelling and in statistical data analysis. The overall strategy to achieve a site description is to develop discipline-specific models by interpretation and analyses of the primary data. The different discipline-specific models are then integrated into a site description. Methodologies for developing the discipline-specific models are documented in

  15. Preliminary site description Forsmark area - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Skagius, Kristina (ed.)

    2005-06-01

    The Swedish Nuclear Fuel and Waste Management Company (SKB) is undertaking site characterisation at two different locations, the Forsmark and Simpevarp areas, with the objective of siting a geological repository for spent nuclear fuel. An integrated component in the characterisation work is the development of a site descriptive model that constitutes a description of the site and its regional setting, covering the current state of the geosphere and the biosphere as well as those ongoing natural processes that affect their long-term evolution. The present report documents the site descriptive modelling activities (version 1.2) for the Forsmark area. The overall objectives of the version 1.2 site descriptive modelling are to produce and document an integrated description of the site and its regional environments based on the site-specific data available from the initial site investigations and to give recommendations on continued investigations. The modelling work is based on primary data, i.e. quality-assured, geoscientific and ecological field data available in the SKB databases SICADA and GIS, available July 31, 2004. The work has been conducted by a project group and associated discipline-specific working groups. The members of the project group represent the disciplines of geology, rock mechanics, thermal properties, hydrogeology, hydrogeochemistry, transport properties and surface ecosystems (including overburden, surface hydrogeochemistry and hydrology). In addition, some group members have specific qualifications of importance in this type of project e.g. expertise in RVS (Rock Visualisation System) modelling, GIS-modelling and in statistical data analysis. The overall strategy to achieve a site description is to develop discipline-specific models by interpretation and analyses of the primary data. The different discipline-specific models are then integrated into a site description. Methodologies for developing the discipline-specific models are documented in

  16. Tank Monitoring and Document control System (TMACS) As Built Software Design Document

    Energy Technology Data Exchange (ETDEWEB)

    GLASSCOCK, J.A.

    2000-01-27

    This document describes the software design for the Tank Monitor and Control System (TMACS). This document captures the existing as-built design of TMACS as of November 1999. It will be used as a reference document to the system maintainers who will be maintaining and modifying the TMACS functions as necessary. The heart of the TMACS system is the ''point-processing'' functionality where a sample value is received from the field sensors and the value is analyzed, logged, or alarmed as required. This Software Design Document focuses on the point-processing functions.

  17. Tank Monitoring and Document control System (TMACS) As Built Software Design Document

    International Nuclear Information System (INIS)

    GLASSCOCK, J.A.

    2000-01-01

    This document describes the software design for the Tank Monitor and Control System (TMACS). This document captures the existing as-built design of TMACS as of November 1999. It will be used as a reference document to the system maintainers who will be maintaining and modifying the TMACS functions as necessary. The heart of the TMACS system is the ''point-processing'' functionality where a sample value is received from the field sensors and the value is analyzed, logged, or alarmed as required. This Software Design Document focuses on the point-processing functions

  18. HANFORD TANK WASTE OPERATIONS SIMULATOR VERSION DESCRIPTION DOCUMENT

    International Nuclear Information System (INIS)

    ALLEN, G.K.

    2003-01-01

    This document describes the software version controls established for the Hanford Tank Waste Operations Simulator (HTWOS). It defines: the methods employed to control the configuration of HTWOS; the version of each of the 26 separate modules for the version 1.0 of HTWOS; the numbering rules for incrementing the version number of each module; and a requirement to include module version numbers in each case results documentation. Version 1.0 of HTWOS is the first version under formal software version control. HTWOS contains separate revision numbers for each of its 26 modules. Individual module version numbers do not reflect the major release HTWOS configured version number

  19. TMAC: Timestamp-Ordered MAC Protocol for Wireless Mesh Networks

    KAUST Repository

    Nawab, Faisal

    2011-05-01

    Wireless Mesh Networks (WMNs) have emerged to meet a need for a self-organized and self-configured multi-hop wireless network infrastructure. Low cost infrastructure and ease of deployment have made WMNs an attractive technology for last mile access. However, 802.11 based WMNs are subject to serious fairness issues. With backlogged TCP traffic, nodes which are two or more hops away from the gateway are subject to starvation, while the one-hop away node saturates the channel with its own local traffic. We study the interactions of TCP and IEEE 802.11 MAC in WMNs to aid us in understanding and overcoming the unfairness problem. We propose a Markov chain to capture the behavior of TCP sessions, particularly the impact on network throughput performance due to the effect of queue utilization and packet relaying. A closed form solution is derived to numerically derive the throughput. Based on the developed model, we propose a distributed MAC protocol called Timestamp-ordered MAC (TMAC), aiming to alleviate the unfairness problem in WMNs via a manipulative per-node scheduling mechanism which takes advantage of the age of each packet as a priority metric. Simulation is conducted to validate our model and to illustrate the fairness characteristics of TMAC. Our results show that TMAC achieves excellent resource allocation fairness while maintaining above 90% of maximum link capacity in parking lot and large grid topologies. Our work illuminates the factors affecting TCP fairness in WMNs. Our theoretical and empirical findings can be used in future research to develop more fairness-aware protocols for WMNs.

  20. Preliminary site description Simpevarp subarea - version 1.2

    International Nuclear Information System (INIS)

    Winberg, Anders

    2005-04-01

    The objectives of the version 1.2 site descriptive modelling (SDM) of the Simpevarp subarea are to produce and document an integrated description of the site and its regional environments based on the site-specific data available from the initial site investigations and to give recommendations on continued investigations on a continuous basis. The modelling work is based on primary data available at the time of the data freeze for Simpevarp 1.2, April 1, 2004. The local scale model area (24 km 2 ) for the Simpevarp 1.2 modelling encompasses both the Simpevarp and Laxemar subareas. The local model area is located in the centre of a regional scale model area (273 km 2 ). Surface ecosystem models in terms of pools and fluxes of carbon have been developed for the terrestrial (e.g. plants and animals) and limnic (e.g. algae and fish) systems using the Lake Frisksjoen drainage area. Furthermore, a first marine ecosystem model has been developed for the Basin Borholmsfjaerden. Three principal lithological domains have been defined in the subarea, an A domain that is dominated by the Aevroe granite, a domain B that is dominated by the fine-grained dioritoid, a C domain that is characterised by a mixture of of Aevroe granite and quartz monzodiorite. A fourth domain is made up a few scattered domains of diorite to gabbro. In total, 22 deformation zones with high confidence of occurrence have been interpreted in the local scale model area. The understanding of the interpreted deformation zones of the Simpevarp subarea is considered adequate to make a preliminary assessment of available storage volumes for a deep repository. High rock stresses do not appear to be a major concern for the Simpevarp subarea. The magnitude of the maximum principal stress at 500 m in the Simpevarp subarea is estimated at 10-22 MPa. The analysis of the thermal conductivity has developed considerably since Simpevarp 1.1. In terms of interpreted mean values for the identified lithological domains, the

  1. Preliminary site description Simpevarp subarea - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Winberg, Anders (ed.)

    2005-04-01

    The objectives of the version 1.2 site descriptive modelling (SDM) of the Simpevarp subarea are to produce and document an integrated description of the site and its regional environments based on the site-specific data available from the initial site investigations and to give recommendations on continued investigations on a continuous basis. The modelling work is based on primary data available at the time of the data freeze for Simpevarp 1.2, April 1, 2004. The local scale model area (24 km{sup 2}) for the Simpevarp 1.2 modelling encompasses both the Simpevarp and Laxemar subareas. The local model area is located in the centre of a regional scale model area (273 km{sup 2}). Surface ecosystem models in terms of pools and fluxes of carbon have been developed for the terrestrial (e.g. plants and animals) and limnic (e.g. algae and fish) systems using the Lake Frisksjoen drainage area. Furthermore, a first marine ecosystem model has been developed for the Basin Borholmsfjaerden. Three principal lithological domains have been defined in the subarea, an A domain that is dominated by the Aevroe granite, a domain B that is dominated by the fine-grained dioritoid, a C domain that is characterised by a mixture of of Aevroe granite and quartz monzodiorite. A fourth domain is made up a few scattered domains of diorite to gabbro. In total, 22 deformation zones with high confidence of occurrence have been interpreted in the local scale model area. The understanding of the interpreted deformation zones of the Simpevarp subarea is considered adequate to make a preliminary assessment of available storage volumes for a deep repository. High rock stresses do not appear to be a major concern for the Simpevarp subarea. The magnitude of the maximum principal stress at 500 m in the Simpevarp subarea is estimated at 10-22 MPa. The analysis of the thermal conductivity has developed considerably since Simpevarp 1.1. In terms of interpreted mean values for the identified lithological

  2. Tank monitor and control system (TMACS) revision 11 acceptance test procedure

    International Nuclear Information System (INIS)

    HOLM, M.J.

    1999-01-01

    The purpose of this document is to describe tests performed to validate Revision 11 of the Tank Monitor and Control System (TMACS) and verify that the software functions as intended by design. This document is intended to test the software portion of TMACS. The tests will be performed on the development system. The software to be tested is the TMACS knowledge bases (KB) and the I/O driver/services. The development system will not be talking to field equipment; instead, the field equipment is simulated using emulators or multiplexers in the lab

  3. TMACS Test Procedure TP005: Sensor configuration, logging, and data conversion

    International Nuclear Information System (INIS)

    Washburn, S.J.

    1994-01-01

    The TMACS Software Project Test Procedures translate the projects acceptance criteria into test steps. Software releases are certified when the affected Test Procedures are successfully performed and the customers authorize installation of these changes

  4. TMACS test procedure TP005: Sensor configuration, logging, and data conversion. Revision 4

    International Nuclear Information System (INIS)

    Washburn, S.J.

    1994-01-01

    The TMACS Software Project Test Procedures translate the project's acceptance criteria into test steps. Software releases are certified when the affected Test Procedures are successfully performed and the customers authorize installation of these changes. This Test Procedure addresses the sensor configuration, conversion and logging requirements of the TMACS. The features to be tested are as follows: sensor configuration data; conversion of continuous sensor data to engineering units; conversion of digital data to discrete states; discrete sensor data logging; and continuous sensor data logging

  5. Preliminary Hydrogeochemical Site Description SFR (version 0.2)

    International Nuclear Information System (INIS)

    Nilsson, Ann-Chatrin; Tullborg, Eva-Lena; Smellie, John

    2010-05-01

    The final repository for low and intermediate level radioactive operational waste, SFR, located about 150 km north of Stockholm, is to undergo a future extension. The present on-going project, scheduled from 2007 to 2011, is to define and characterise a suitable bedrock volume for the extended repository. This will include the drilling and geoscientific evaluation of seven core-drilled and four percussion boreholes as well as subsequent interpretation and modelling based on the obtained results in order to provide the necessary information for safety assessment and repository design. This report presents a preliminary hydrogeochemical site description for the SFR site and should be considered as an early progress report rather than a complete hydrochemical site descriptive model. The completed hydrogeochemical field investigations have yielded chemical data from a total of 12 borehole sections in five boreholes and additional data from the entire length of two open boreholes in connection with hydraulic tests. These data, together with data from a total of 18 early boreholes in the present SFR tunnel system, were used in the interpretation work. The main part of the data consisted of basic groundwater analyses including major ions and isotopes. Some sporadic gas, microbe and measured redox data are available, but these are either not treated in this report, or are only briefly discussed. This was due to time constraints since special care is needed when interpreting few data of varying quality. The groundwaters in the SFR dataset cover a maximum depth down to about .400 masl and represent a relatively limited salinity range (1,500 to 5,500 mg/L chloride). However, the δ 18 O values show a wide variation (-1.55 to -0.75% V-SMOW) similar to that reported from the Forsmark site investigations. At the SFR, marine indicators such as Mg/Cl, K/Cl and Br/Cl also show relatively large variations considering the limited salinity range. From very few measured Eh values, and

  6. Preliminary Hydrogeochemical Site Description SFR (version 0.2)

    Energy Technology Data Exchange (ETDEWEB)

    Nilsson, Ann-Chatrin (Geosigma AB, Uppaala (Sweden)); Tullborg, Eva-Lena (Terralogica AB, Graabo (Sweden)); Smellie, John (Conterra AB, Partille (Sweden))

    2010-05-15

    The final repository for low and intermediate level radioactive operational waste, SFR, located about 150 km north of Stockholm, is to undergo a future extension. The present on-going project, scheduled from 2007 to 2011, is to define and characterise a suitable bedrock volume for the extended repository. This will include the drilling and geoscientific evaluation of seven core-drilled and four percussion boreholes as well as subsequent interpretation and modelling based on the obtained results in order to provide the necessary information for safety assessment and repository design. This report presents a preliminary hydrogeochemical site description for the SFR site and should be considered as an early progress report rather than a complete hydrochemical site descriptive model. The completed hydrogeochemical field investigations have yielded chemical data from a total of 12 borehole sections in five boreholes and additional data from the entire length of two open boreholes in connection with hydraulic tests. These data, together with data from a total of 18 early boreholes in the present SFR tunnel system, were used in the interpretation work. The main part of the data consisted of basic groundwater analyses including major ions and isotopes. Some sporadic gas, microbe and measured redox data are available, but these are either not treated in this report, or are only briefly discussed. This was due to time constraints since special care is needed when interpreting few data of varying quality. The groundwaters in the SFR dataset cover a maximum depth down to about .400 masl and represent a relatively limited salinity range (1,500 to 5,500 mg/L chloride). However, the delta18O values show a wide variation (-1.55 to -0.75% V-SMOW) similar to that reported from the Forsmark site investigations. At the SFR, marine indicators such as Mg/Cl, K/Cl and Br/Cl also show relatively large variations considering the limited salinity range. From very few measured Eh values, and

  7. TMAC: Timestamp-Ordered MAC for CSMA/CA Wireless Mesh Networks

    KAUST Repository

    Nawab, Faisal Saud Yousef

    2011-07-31

    We propose TMAC, a timestamp-ordered MAC protocol for Wireless Mesh Networks (WMNs). TMAC extends CSMA/CA by scheduling data packets based on their age. Prior to transmitting a data packet, a transmitter broadcasts a request control message appended with a timestamp to a selected list of neighbors. It can proceed with the transmission only if it receives a sufficient number of grant control messages from these neighbors. A grant message indicates that the associated data packet has the lowest timestamp of all the packets pending transmission at the local transmit queue. We demonstrate that a loose ordering of timestamps among neighboring nodes is sufficient for enforcing local fairness, subsequently leading to flow rate fairness in a multi-hop WMN. We show that TMAC can be implemented using the control frames in IEEE 802.11 stack, and thus can be easily integrated in existing 802.11-based WMNs. Our simulation results show that TMAC achieves excellent resource allocation fairness while maintaining over 90% of maximum link capacity in parking lot and large grid topologies.

  8. ADST, Version Description Document for the BDS-D PVD 1.0.0

    Science.gov (United States)

    1993-04-02

    common/libsrc/libmatrix/RCS/libmatrix.h,v Working file: libmatrix.h head: 1.1 description: Initial PVD Turnover * 71 U ADSL /WDLUTR--93-003076 April 2...003076 April 2, 1993 di: 1992/I 1/03 19:23:58; author: cm- adsL - staae: Exp; Initial Version RCS file: Joo",libsf,,Ibev,’CSduoatioac.v Woring rile

  9. Thermal modelling. Preliminary site description. Forsmark area - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Sundberg, Jan; Back, Paer-Erik; Bengtsson, Anna; Laendell, Maerta [Geo Innova AB, Linkoeping (Sweden)

    2005-08-01

    This report presents the thermal site descriptive model for the Forsmark area, version 1.2. The main objective of this report is to present the thermal modelling work where data has been identified, quality controlled, evaluated and summarised in order to make an upscaling to lithological domain level possible. The thermal conductivity at canister scale has been modelled for two different lithological domains (RFM029 and RFM012, both dominated by granite to granodiorite (101057)). A main modelling approach has been used to determine the mean value of the thermal conductivity. Two alternative/complementary approaches have been used to evaluate the spatial variability of the thermal conductivity at domain level. The thermal modelling approaches are based on the lithological model for the Forsmark area, version 1.2 together with rock type models constituted from measured and calculated (from mineral composition) thermal conductivities. Results indicate that the mean of thermal conductivity is expected to exhibit a small variation between the different domains, 3.46 W/(mxK) for RFM012 to 3.55 W/(mxK) for RFM029. The spatial distribution of the thermal conductivity does not follow a simple model. Lower and upper 95% confidence limits are based on the modelling results, but have been rounded of to only two significant figures. Consequently, the lower limit is 2.9 W/(mxK), while the upper is 3.8 W/(mxK). This is applicable to both the investigated domains. The temperature dependence is rather small with a decrease in thermal conductivity of 10.0% per 100 deg C increase in temperature for the dominating rock type. There are a number of important uncertainties associated with these results. One of the uncertainties considers the representative scale for the canister. Another important uncertainty is the methodological uncertainties associated with the upscaling of thermal conductivity from cm-scale to canister scale. In addition, the representativeness of rock samples is

  10. A computationally efficient description of heterogeneous freezing: A simplified version of the Soccer ball model

    Science.gov (United States)

    Niedermeier, Dennis; Ervens, Barbara; Clauss, Tina; Voigtländer, Jens; Wex, Heike; Hartmann, Susan; Stratmann, Frank

    2014-01-01

    In a recent study, the Soccer ball model (SBM) was introduced for modeling and/or parameterizing heterogeneous ice nucleation processes. The model applies classical nucleation theory. It allows for a consistent description of both apparently singular and stochastic ice nucleation behavior, by distributing contact angles over the nucleation sites of a particle population assuming a Gaussian probability density function. The original SBM utilizes the Monte Carlo technique, which hampers its usage in atmospheric models, as fairly time-consuming calculations must be performed to obtain statistically significant results. Thus, we have developed a simplified and computationally more efficient version of the SBM. We successfully used the new SBM to parameterize experimental nucleation data of, e.g., bacterial ice nucleation. Both SBMs give identical results; however, the new model is computationally less expensive as confirmed by cloud parcel simulations. Therefore, it is a suitable tool for describing heterogeneous ice nucleation processes in atmospheric models.

  11. Simulation Experiment Description Markup Language (SED-ML) Level 1 Version 3 (L1V3).

    Science.gov (United States)

    Bergmann, Frank T; Cooper, Jonathan; König, Matthias; Moraru, Ion; Nickerson, David; Le Novère, Nicolas; Olivier, Brett G; Sahle, Sven; Smith, Lucian; Waltemath, Dagmar

    2018-03-19

    The creation of computational simulation experiments to inform modern biological research poses challenges to reproduce, annotate, archive, and share such experiments. Efforts such as SBML or CellML standardize the formal representation of computational models in various areas of biology. The Simulation Experiment Description Markup Language (SED-ML) describes what procedures the models are subjected to, and the details of those procedures. These standards, together with further COMBINE standards, describe models sufficiently well for the reproduction of simulation studies among users and software tools. The Simulation Experiment Description Markup Language (SED-ML) is an XML-based format that encodes, for a given simulation experiment, (i) which models to use; (ii) which modifications to apply to models before simulation; (iii) which simulation procedures to run on each model; (iv) how to post-process the data; and (v) how these results should be plotted and reported. SED-ML Level 1 Version 1 (L1V1) implemented support for the encoding of basic time course simulations. SED-ML L1V2 added support for more complex types of simulations, specifically repeated tasks and chained simulation procedures. SED-ML L1V3 extends L1V2 by means to describe which datasets and subsets thereof to use within a simulation experiment.

  12. Description of climate, surface hydrology, and near-surface hydrogeology. Preliminary site description. Forsmark area - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Johansson, Per-Olof [Artesia Grundvattenkonsult AB, Stockholm (Sweden); Werner, Kent [SWECO VIAK AB/Golder Associates AB, Stockholm (Sweden); Bosson, Emma; Berglund, Sten [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden); Juston, John [DBE Sweden, Uppsala (Sweden)

    2005-06-15

    The Swedish Nuclear Fuel and Waste Management Company (SKB) is conducting site investigations at two different locations, the Forsmark and Simpevarp areas, with the objective of siting a geological repository for spent nuclear fuel. The results from the investigations at the sites are used as a basic input to the development of Site Descriptive Models (SDM). The SDM shall summarise the current state of knowledge of the site, and provide parameters and models to be used in further analyses within Safety Assessment, Repository Design and Environmental Impact Assessment. The present report is a background report describing the meteorological conditions and the modelling of surface hydrology and near-surface hydrogeology in support of the Forsmark version 1.2 SDM based on the data available in the Forsmark 1.2 'data freeze' (July 31, 2004). The groundwater is very shallow, with groundwater levels within one meter below ground as an annual mean for almost all groundwater monitoring wells. Also, the annual groundwater level amplitude is less than 1.5 m for most wells. The shallow groundwater levels mean that there is a strong interaction between evapotranspiration, soil moisture and groundwater. In the modelling, surface water and near-surface groundwater divides are assumed to coincide. The small-scale topography implies that many local, shallow groundwater flow systems are formed in the Quaternary deposits, overlaying more large-scale flow systems associated with groundwater flows at greater depths. Groundwater level time series from wells in till and bedrock within the same areas show a considerably higher groundwater level in the till than in the bedrock. The observed differences in levels are not fully consistent with the good hydraulic contact between overburden and bedrock indicated by the hydraulic tests in the Quaternary deposits. However, the relatively lower groundwater levels in the bedrock may be caused by the horizontal to sub-horizontal highly

  13. Hydrogeochemical evaluation. Preliminary site description Laxemar subarea - version 1.2

    International Nuclear Information System (INIS)

    Laaksoharju, Marcus

    2006-04-01

    groups of groundwaters have been identified. Characterisation of pore water in core samples from the Laxemar borehole, KLX03, shows that chemical and isotopic pore water signatures have a characteristic variation of groundwater composition with rock type and depth that is in close agreement with the general trends in hydrochemistry of the adjacent formation (fracture) groundwaters. There is little apparent evidence of a glacial melt signature in the pore waters. Pore waters at depth show an affinity with deep brine evolution. Steady state conditions between pore water and formation groundwaters in the fractures are essentially only developed in the shallow zone of the Aevroe granite, while at depths greater than 450 m the chemical and isotopic composition of the pore water differs markedly from that of the fracture groundwaters in fractures. Diffusion between rock pore water and adjacent fracture groundwaters is identified as the dominant transport process; calculated diffusion coefficients agree well with current knowledge of conditions in the Laxemar site. In this report the models and the site understanding have been consolidated. Despite relatively few new data from depth, the models have been updated and the further understanding gained of groundwater origin, groundwater evolution, reactions, studies of interaction between shallow and deep groundwater, pore water composition in bedrock, microbial depth variation, uncertainties of the mixing calculations, tritium variations with time and 3D visualisation of the spatial variability of groundwater properties. An updated Hydrogeochemical Site Descriptive Model version 1.2 for Laxemar subarea has evolved. The resulting description has improved compared with the 1.2 version for Simpevarp subarea by producing a more detailed process modelling, uncertainty analysis and 3D visualisation. The microbial characterisation gives direct support to, for example, the redox modelling. The coupled transport modelling can address

  14. Hydrogeochemical evaluation. Preliminary site description Laxemar subarea - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Laaksoharju, Marcus (ed.) [Geopoint AB, Stockholm (Sweden)

    2006-04-15

    hydrochemical groups of groundwaters have been identified. Characterisation of pore water in core samples from the Laxemar borehole, KLX03, shows that chemical and isotopic pore water signatures have a characteristic variation of groundwater composition with rock type and depth that is in close agreement with the general trends in hydrochemistry of the adjacent formation (fracture) groundwaters. There is little apparent evidence of a glacial melt signature in the pore waters. Pore waters at depth show an affinity with deep brine evolution. Steady state conditions between pore water and formation groundwaters in the fractures are essentially only developed in the shallow zone of the Aevroe granite, while at depths greater than 450 m the chemical and isotopic composition of the pore water differs markedly from that of the fracture groundwaters in fractures. Diffusion between rock pore water and adjacent fracture groundwaters is identified as the dominant transport process; calculated diffusion coefficients agree well with current knowledge of conditions in the Laxemar site. In this report the models and the site understanding have been consolidated. Despite relatively few new data from depth, the models have been updated and the further understanding gained of groundwater origin, groundwater evolution, reactions, studies of interaction between shallow and deep groundwater, pore water composition in bedrock, microbial depth variation, uncertainties of the mixing calculations, tritium variations with time and 3D visualisation of the spatial variability of groundwater properties. An updated Hydrogeochemical Site Descriptive Model version 1.2 for Laxemar subarea has evolved. The resulting description has improved compared with the 1.2 version for Simpevarp subarea by producing a more detailed process modelling, uncertainty analysis and 3D visualisation. The microbial characterisation gives direct support to, for example, the redox modelling. The coupled transport modelling can

  15. Thermal modelling. Preliminary site description Simpevarp subarea - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Sundberg, Jan; Back, Paer-Erik; Bengtsson, Anna; Laendell, Maerta [Geo Innova AB, Linkoeping (Sweden)

    2005-08-15

    This report presents the thermal site descriptive model for the Simpevarp subarea, version 1.2. The main objective of this report is to present the thermal modelling work where data has been identified, quality controlled, evaluated and summarised in order to make an upscaling to lithological domain level possible. The thermal conductivity at possible canister scale has been modelled for four different lithological domains (RSMA01 (Aevroe granite), RSMB01 (Fine-grained dioritoid), RSMC01 (mixture of Aevroe granite and Quartz monzodiorite), and RSMD01 (Quartz monzodiorite)). A main modelling approach has been used to determine the mean value of the thermal conductivity. Three alternative/complementary approaches have been used to evaluate the spatial variability of the thermal conductivity at domain level. The thermal modelling approaches are based on the lithological model for the Simpevarp subarea, version 1.2 together with rock type models constituted from measured and calculated (from mineral composition) thermal conductivities. For one rock type, the Aevroe granite (501044), density loggings within the specific rock type has also been used in the domain modelling in order to consider the spatial variability within the Aevroe granite. This has been possible due to the presented relationship between density and thermal conductivity, valid for the Aevroe granite. Results indicate that the mean of thermal conductivity is expected to exhibit only a small variation between the different domains, from 2.62 W/(m.K) to 2.80 W/(m.K). The standard deviation varies according to the scale considered and for the canister scale it is expected to range from 0.20 to 0.28 W/(m.K). Consequently, the lower confidence limit (95% confidence) for the canister scale is within the range 2.04-2.35 W/(m.K) for the different domains. The temperature dependence is rather small with a decrease in thermal conductivity of 1.1-3.4% per 100 deg C increase in temperature for the dominating rock

  16. Thermal modelling. Preliminary site description Simpevarp subarea - version 1.2

    International Nuclear Information System (INIS)

    Sundberg, Jan; Back, Paer-Erik; Bengtsson, Anna; Laendell, Maerta

    2005-08-01

    This report presents the thermal site descriptive model for the Simpevarp subarea, version 1.2. The main objective of this report is to present the thermal modelling work where data has been identified, quality controlled, evaluated and summarised in order to make an upscaling to lithological domain level possible. The thermal conductivity at possible canister scale has been modelled for four different lithological domains (RSMA01 (Aevroe granite), RSMB01 (Fine-grained dioritoid), RSMC01 (mixture of Aevroe granite and Quartz monzodiorite), and RSMD01 (Quartz monzodiorite)). A main modelling approach has been used to determine the mean value of the thermal conductivity. Three alternative/complementary approaches have been used to evaluate the spatial variability of the thermal conductivity at domain level. The thermal modelling approaches are based on the lithological model for the Simpevarp subarea, version 1.2 together with rock type models constituted from measured and calculated (from mineral composition) thermal conductivities. For one rock type, the Aevroe granite (501044), density loggings within the specific rock type has also been used in the domain modelling in order to consider the spatial variability within the Aevroe granite. This has been possible due to the presented relationship between density and thermal conductivity, valid for the Aevroe granite. Results indicate that the mean of thermal conductivity is expected to exhibit only a small variation between the different domains, from 2.62 W/(m.K) to 2.80 W/(m.K). The standard deviation varies according to the scale considered and for the canister scale it is expected to range from 0.20 to 0.28 W/(m.K). Consequently, the lower confidence limit (95% confidence) for the canister scale is within the range 2.04-2.35 W/(m.K) for the different domains. The temperature dependence is rather small with a decrease in thermal conductivity of 1.1-3.4% per 100 deg C increase in temperature for the dominating rock

  17. Thermal site descriptive model. A strategy for the model development during site investigations - version 2

    International Nuclear Information System (INIS)

    Back, Paer-Erik; Sundberg, Jan

    2007-09-01

    This report presents a strategy for describing, predicting and visualising the thermal aspects of the site descriptive model. The strategy is an updated version of an earlier strategy applied in all SDM versions during the initial site investigation phase at the Forsmark and Oskarshamn areas. The previous methodology for thermal modelling did not take the spatial correlation fully into account during simulation. The result was that the variability of thermal conductivity in the rock mass was not sufficiently well described. Experience from earlier thermal SDMs indicated that development of the methodology was required in order describe the spatial distribution of thermal conductivity in the rock mass in a sufficiently reliable way, taking both variability within rock types and between rock types into account. A good description of the thermal conductivity distribution is especially important for the lower tail. This tail is important for the design of a repository because it affects the canister spacing. The presented approach is developed to be used for final SDM regarding thermal properties, primarily thermal conductivity. Specific objectives for the strategy of thermal stochastic modelling are: Description: statistical description of the thermal conductivity of a rock domain. Prediction: prediction of thermal conductivity in a specific rock volume. Visualisation: visualisation of the spatial distribution of thermal conductivity. The thermal site descriptive model should include the temperature distribution and thermal properties of the rock mass. The temperature is the result of the thermal processes in the repository area. Determination of thermal transport properties can be made using different methods, such as laboratory investigations, field measurements, modelling from mineralogical composition and distribution, modelling from density logging and modelling from temperature logging. The different types of data represent different scales, which has to be

  18. Thermal site descriptive model. A strategy for the model development during site investigations - version 2

    Energy Technology Data Exchange (ETDEWEB)

    Back, Paer-Erik; Sundberg, Jan [Geo Innova AB (Sweden)

    2007-09-15

    This report presents a strategy for describing, predicting and visualising the thermal aspects of the site descriptive model. The strategy is an updated version of an earlier strategy applied in all SDM versions during the initial site investigation phase at the Forsmark and Oskarshamn areas. The previous methodology for thermal modelling did not take the spatial correlation fully into account during simulation. The result was that the variability of thermal conductivity in the rock mass was not sufficiently well described. Experience from earlier thermal SDMs indicated that development of the methodology was required in order describe the spatial distribution of thermal conductivity in the rock mass in a sufficiently reliable way, taking both variability within rock types and between rock types into account. A good description of the thermal conductivity distribution is especially important for the lower tail. This tail is important for the design of a repository because it affects the canister spacing. The presented approach is developed to be used for final SDM regarding thermal properties, primarily thermal conductivity. Specific objectives for the strategy of thermal stochastic modelling are: Description: statistical description of the thermal conductivity of a rock domain. Prediction: prediction of thermal conductivity in a specific rock volume. Visualisation: visualisation of the spatial distribution of thermal conductivity. The thermal site descriptive model should include the temperature distribution and thermal properties of the rock mass. The temperature is the result of the thermal processes in the repository area. Determination of thermal transport properties can be made using different methods, such as laboratory investigations, field measurements, modelling from mineralogical composition and distribution, modelling from density logging and modelling from temperature logging. The different types of data represent different scales, which has to be

  19. Hydrogeochemical evaluation for Simpevarp model version 1.2. Preliminary site description of the Simpevarp area

    International Nuclear Information System (INIS)

    Laaksoharju, Marcus

    2004-12-01

    to Type C groundwaters. Main reactions involve water/rock interaction for long residence non-marine brines driven by diffusion. A modelling approach was used to simulate the composition of the highly saline or brine groundwaters and, in the Simpevarp area, concluded that mixing is the main irreversible process. It controls chloride concentration that, in turn, determines the re-equilibrium path (water-rock interaction) triggered by mixing. Coupled transport modelling was used to model the groundwater age, tritium content and calcite dissolution/precipitation processes at shallow groundwater depths at both Laxemar and Simpevarp. The modelled results provide additional support to hydrogeological models by using independent hydrochemical information and added support to the general hydrogeochemical understanding of the site. In this evaluation the groundwater model has been updated, the salinity distribution, mixing processes and the major reactions altering the groundwaters have been modelled down to a depth of 1000 m, and an updated Hydrogeochemical Site Descriptive Model version 1.2 has been produced. More groundwater and isotopic data, together with microbial information, colloids and gases, provided additional site descriptive information. Finally, the introduction of coupled modelling provided additional possibilities to address independently the various processes in question

  20. Bedrock transport properties. Preliminary site description Simpevarp subarea - version 1.2

    International Nuclear Information System (INIS)

    Byegaard, Johan; Gustavsson, Eva; Tullborg, Eva-Lena; Berglund, Sten

    2005-06-01

    This report presents the site descriptive model of transport properties developed as a part of the Simpevarp 1.2 site description. The main parameters included in the model, referred to as retardation parameters, are the matrix porosity and diffusivity, and the matrix sorption coefficient K d . The model is based on the presently available site investigation data, mainly obtained from laboratory investigations of core samples from boreholes within the Simpevarp subarea, and on data from previous studies at the Aespoe Hard Rock Laboratory (Aespoe HRL). The modelling is a first attempt, based on limited data, to obtain a description of the retardation parameters. Further refinement of the model is foreseen when more data becomes available for future versions of the Simpevarp site description. The modelling work included descriptions of rock mass geology, the fractures and deformation zones, the hydrogeochemistry and also the available results from the site specific porosity, sorption and diffusivity measurements. The description of the transport related aspects of the data and models presented by other modelling disciplines is an important part of the transport description. In accordance with the strategy for the modelling of transport properties, the results are presented as a 'retardation model', in which a summary of the transport data for the different geological compartments is given. Concerning the major rock types, Aevroe granite, quartz monzodiorite and fine-grained dioritoid are identified as the rock types dominating the main rock domains identified and described in the site descriptive model of the bedrock geology. However, relatively large parts of the rock consist of altered rock and the open fracture frequency appears to be correlated to the altered/oxidised parts of the rock. This implies that transport in open fractures to a large extent takes place in the altered parts of the rock. For the fracture mineralogy, it is found that the hydraulically

  1. Thermal modelling. Preliminary site description Laxemar subarea - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Sundberg, Jan; Wrafter, John; Back, Paer-Erik; Laendell, Maerta [Geo Innova AB, Linkoeping (Sweden)

    2006-02-15

    This report presents the thermal site descriptive model for the Laxemar subarea, version 1.2. The main objective of this report is to present the thermal modelling work where data has been identified, quality controlled, evaluated and summarised in order to make an upscaling to lithological domain level possible. The thermal conductivity at canister scale has been modelled for five different lithological domains: RSMA (Aevroe granite), RSMBA (mixture of Aevroe granite and fine-grained dioritoid), RSMD (quartz monzodiorite), RSME (diorite/gabbro) and RSMM (mix domain with high frequency of diorite to gabbro). A base modelling approach has been used to determine the mean value of the thermal conductivity. Four alternative/complementary approaches have been used to evaluate the spatial variability of the thermal conductivity at domain level. The thermal modelling approaches are based on the lithological domain model for the Laxemar subarea, version 1.2 together with rock type models based on measured and calculated (from mineral composition) thermal conductivities. For one rock type, Aevroe granite (501044), density loggings have also been used in the domain modelling in order to evaluate the spatial variability within the Aevroe granite. This has been possible due to an established relationship between density and thermal conductivity, valid for the Aevroe granite. Results indicate that the means of thermal conductivity for the various domains are expected to exhibit a variation from 2.45 W/(m.K) to 2.87 W/(m.K). The standard deviation varies according to the scale considered, and for the 0.8 m scale it is expected to range from 0.17 to 0.29 W/(m.K). Estimates of lower tail percentiles for the same scale are presented for all five domains. The temperature dependence is rather small with a decrease in thermal conductivity of 1.1-5.3% per 100 deg C increase in temperature for the dominant rock types. There are a number of important uncertainties associated with these

  2. Description of recommended non-thermal mixed waste treatment technologies: Version 1.0

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-01

    This document contains description of the technologies selected for inclusions in the Integrated Nonthermal Treatment Systems (INTS) Study. The purpose of these descriptions is to provide a more complete description of the INTS technologies. It supplements the summary descriptions of candidate nonthermal technologies that were considered for the INTS.

  3. Description of recommended non-thermal mixed waste treatment technologies: Version 1.0

    International Nuclear Information System (INIS)

    1995-08-01

    This document contains description of the technologies selected for inclusions in the Integrated Nonthermal Treatment Systems (INTS) Study. The purpose of these descriptions is to provide a more complete description of the INTS technologies. It supplements the summary descriptions of candidate nonthermal technologies that were considered for the INTS

  4. Hydrogeochemical evaluation. Preliminary site description Forsmark area - version 1.2

    International Nuclear Information System (INIS)

    Laaksoharju, Marcus

    2005-03-01

    bedrock is estimated to be less than in other investigated sites such as Simpevarp and Laxemar, where the presence of Quaternary overburden is less important. The hydrogeologic behaviour of the Quaternary overburden in Forsmark provides a plausible explanation for the preservation of Littorina Sea signatures found in several groundwater samples, even at very shallow depths. Other (and complementary) explanations can be related with the flat topography, as well as with the fact that the Forsmark site has emerged over the sea level more recently than other investigated sites. The modelling indicates also that the groundwater composition at repository depths is such that the representative samples from KFM02A: 509-516 m and KFM03A: 448-453 m can meet the SKB chemical stability criteria for Eh, pH, TDS, DOC and Ca+Mg. In this evaluation the groundwater flow model has been updated, the salinity distribution, mixing processes and the major reactions altering the groundwaters have been modelled down to a depth of 1,000 m, and an updated Hydrogeochemical site descriptive model version 1.2 has been produced. More groundwater and isotopic data, together with microbial information, colloids and gases, provided additional site descriptive information. Finally, the introduction of coupled modelling provided further possibilities to address independently the various processes in question

  5. Hydrogeochemical evaluation for Simpevarp model version 1.2. Preliminary site description of the Simpevarp area

    Energy Technology Data Exchange (ETDEWEB)

    Laaksoharju, Marcus (ed.) [Geopoint AB, Stockholm (Sweden)

    2004-12-01

    process. It controls chloride concentration that, in turn, determines the re-equilibrium path (water-rock interaction) triggered by mixing. Coupled transport modelling was used to model the groundwater age, tritium content and calcite dissolution/precipitation processes at shallow groundwater depths at both Laxemar and Simpevarp. The modelled results provide additional support to hydrogeological models by using independent hydrochemical information and added support to the general hydrogeochemical understanding of the site. In this evaluation the groundwater model has been updated, the salinity distribution, mixing processes and the major reactions altering the groundwaters have been modelled down to a depth of 1000 m, and an updated Hydrogeochemical Site Descriptive Model version 1.2 has been produced. More groundwater and isotopic data, together with microbial information, colloids and gases, provided additional site descriptive information. Finally, the introduction of coupled modelling provided additional possibilities to address independently the various processes in question.

  6. Hydrogeochemical evaluation. Preliminary site description Forsmark area - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Laaksoharju, Marcus (ed.) [Geopoint AB, Stockholm (Sweden)

    2005-03-15

    effective recharge into the granitic bedrock is estimated to be less than in other investigated sites such as Simpevarp and Laxemar, where the presence of Quaternary overburden is less important. The hydrogeologic behaviour of the Quaternary overburden in Forsmark provides a plausible explanation for the preservation of Littorina Sea signatures found in several groundwater samples, even at very shallow depths. Other (and complementary) explanations can be related with the flat topography, as well as with the fact that the Forsmark site has emerged over the sea level more recently than other investigated sites. The modelling indicates also that the groundwater composition at repository depths is such that the representative samples from KFM02A: 509-516 m and KFM03A: 448-453 m can meet the SKB chemical stability criteria for Eh, pH, TDS, DOC and Ca+Mg. In this evaluation the groundwater flow model has been updated, the salinity distribution, mixing processes and the major reactions altering the groundwaters have been modelled down to a depth of 1,000 m, and an updated Hydrogeochemical site descriptive model version 1.2 has been produced. More groundwater and isotopic data, together with microbial information, colloids and gases, provided additional site descriptive information. Finally, the introduction of coupled modelling provided further possibilities to address independently the various processes in question.

  7. ADST Version Description Document for the BDS-D MCC/Masscomp Host 1.0.0.

    Science.gov (United States)

    1993-02-02

    Turnover revision 1.1 date: 1993/02101 15:50:21; author: cm- adsL state: Exp; Initial Verion 1.0.0 RCS file: Jsrc/mcc/libmcc/RCSlradio.c,v Working file...1.1 description: Initial MCC I Masscomp Turnover revision 1.1 date: 1993JO2/01 15:15:27; author cm- adsL state: Exp; Initial Version 1.0.0 I10 U ADST

  8. The high-resolution version of TM5-MP for optimized satellite retrievals: description and validation

    Science.gov (United States)

    Williams, Jason E.; Folkert Boersma, K.; Le Sager, Phillipe; Verstraeten, Willem W.

    2017-02-01

    We provide a comprehensive description of the high-resolution version of the TM5-MP global chemistry transport model, which is to be employed for deriving highly resolved vertical profiles of nitrogen dioxide (NO2), formaldehyde (CH2O), and sulfur dioxide (SO2) for use in satellite retrievals from platforms such as the Ozone Monitoring Instrument (OMI) and the Sentinel-5 Precursor, and the TROPOspheric Monitoring Instrument (tropOMI). Comparing simulations conducted at horizontal resolutions of 3° × 2° and 1° × 1° reveals differences of ±20 % exist in the global seasonal distribution of 222Rn, being larger near specific coastal locations and tropical oceans. For tropospheric ozone (O3), analysis of the chemical budget terms shows that the impact on globally integrated photolysis rates is rather low, in spite of the higher spatial variability of meteorological data fields from ERA-Interim at 1° × 1°. Surface concentrations of O3 in high-NOx regions decrease between 5 and 10 % at 1° × 1° due to a reduction in NOx recycling terms and an increase in the associated titration term of O3 by NO. At 1° × 1°, the net global stratosphere-troposphere exchange of O3 decreases by ˜ 7 %, with an associated shift in the hemispheric gradient. By comparing NO, NO2, HNO3 and peroxy-acetyl-nitrate (PAN) profiles against measurement composites, we show that TM5-MP captures the vertical distribution of NOx and long-lived NOx reservoirs at background locations, again with modest changes at 1° × 1°. Comparing monthly mean distributions in lightning NOx and applying ERA-Interim convective mass fluxes, we show that the vertical re-distribution of lightning NOx changes with enhanced release of NOx in the upper troposphere. We show that surface mixing ratios in both NO and NO2 are generally underestimated in both low- and high-NOx scenarios. For Europe, a negative bias exists for [NO] at the surface across the whole domain, with lower biases at 1° × 1° at only ˜ 20

  9. Borehole and environmental protection descriptive and numerical data, Yamal Peninsula, Russia, Version 1

    Data.gov (United States)

    National Aeronautics and Space Administration — This database of selected borehole records from the Yamal Peninsula, Russia, contains environmental descriptions (textual and numerical) of the units on the index...

  10. Using bio.tools to generate and annotate workbench tool descriptions [version 1; referees: 2 approved

    Directory of Open Access Journals (Sweden)

    Kenzo-Hugo Hillion

    2017-11-01

    Full Text Available Workbench and workflow systems such as Galaxy, Taverna, Chipster, or Common Workflow Language (CWL-based frameworks, facilitate the access to bioinformatics tools in a user-friendly, scalable and reproducible way. Still, the integration of tools in such environments remains a cumbersome, time consuming and error-prone process. A major consequence is the incomplete or outdated description of tools that are often missing important information, including parameters and metadata such as publication or links to documentation. ToolDog (Tool DescriptiOn Generator facilitates the integration of tools - which have been registered in the ELIXIR tools registry (https://bio.tools - into workbench environments by generating tool description templates. ToolDog includes two modules. The first module analyses the source code of the bioinformatics software with language-specific plugins, and generates a skeleton for a Galaxy XML or CWL tool description. The second module is dedicated to the enrichment of the generated tool description, using metadata provided by bio.tools. This last module can also be used on its own to complete or correct existing tool descriptions with missing metadata.

  11. Description and evaluation of the Model for Ozone and Related chemical Tracers, version 4 (MOZART-4

    Directory of Open Access Journals (Sweden)

    L. K. Emmons

    2010-01-01

    Full Text Available The Model for Ozone and Related chemical Tracers, version 4 (MOZART-4 is an offline global chemical transport model particularly suited for studies of the troposphere. The updates of the model from its previous version MOZART-2 are described, including an expansion of the chemical mechanism to include more detailed hydrocarbon chemistry and bulk aerosols. Online calculations of a number of processes, such as dry deposition, emissions of isoprene and monoterpenes and photolysis frequencies, are now included. Results from an eight-year simulation (2000–2007 are presented and evaluated. The MOZART-4 source code and standard input files are available for download from the NCAR Community Data Portal (http://cdp.ucar.edu.

  12. Systems Biology Graphical Notation: Process Description language Level 1 Version 1.3.

    Science.gov (United States)

    Moodie, Stuart; Le Novère, Nicolas; Demir, Emek; Mi, Huaiyu; Villéger, Alice

    2015-09-04

    The Systems Biological Graphical Notation (SBGN) is an international community effort for standardized graphical representations of biological pathways and networks. The goal of SBGN is to provide unambiguous pathway and network maps for readers with different scientific backgrounds as well as to support efficient and accurate exchange of biological knowledge between different research communities, industry, and other players in systems biology. Three SBGN languages, Process Description (PD), Entity Relationship (ER) and Activity Flow (AF), allow for the representation of different aspects of biological and biochemical systems at different levels of detail. The SBGN Process Description language represents biological entities and processes between these entities within a network. SBGN PD focuses on the mechanistic description and temporal dependencies of biological interactions and transformations. The nodes (elements) are split into entity nodes describing, e.g., metabolites, proteins, genes and complexes, and process nodes describing, e.g., reactions and associations. The edges (connections) provide descriptions of relationships (or influences) between the nodes, such as consumption, production, stimulation and inhibition. Among all three languages of SBGN, PD is the closest to metabolic and regulatory pathways in biological literature and textbooks, but its well-defined semantics offer a superior precision in expressing biological knowledge.

  13. The OCO-2 Version 8 XCO2 Data Product Fall 2017 Release: Description and Preliminary Validation

    Science.gov (United States)

    O'Dell, C.; Eldering, A.; Crisp, D.; Fisher, B.; Gunson, M. R.; Kiel, M.; Mandrake, L.; Taylor, T. L.; Wennberg, P. O.

    2017-12-01

    Since beginning its science mission in September 2014, the Orbiting Carbon Observatory-2 (OCO-2) has provided 1-2 million estimates of the column average carbon dioxide (CO2) dry air mole fraction, XCO2, each month. While the Version-7 (V7) OCO-2 data product is generally of high quality, it includes some notable biases, including low and high biases in the tropical and extratropical oceans, respectively, and biases associated with unscreened clouds and variable topography. Because even small (simulates small aerosol particles high in the atmosphere, such as the Junge Layer and aerosols due to volcanic eruptions. It also mitigates the impact of zero level offsets due to a thin layer of ice that accumulates on the OCO-2 detectors, which actually mimics a small, lofted aerosol particle in the retrieval forward model. We show comparisons of the new XCO2 product to both TCCON and models. Improvements in the V8 screening also provides additional data over tropical oceans, which may enhance coverage in these regions. These data are currently being evaluated. Similarly, the new version 8 data may enable improved coverage at higher latitudes via a renewed focus on the challenging retrievals at higher solar zenith angles and over snow and ice covered surfaces.

  14. Description of the new version 4.0 of the tritium model UFOTRI including user guide

    International Nuclear Information System (INIS)

    Raskob, W.

    1993-08-01

    In view of the future operation of fusion reactors the release of tritium may play a dominant role during normal operation as well as after accidents. Because of its physical and chemical properties which differ significantly from those of other radionuclides, the model UFOTRI for assessing the radiological consequences of accidental tritium releases has been developed. It describes the behaviour of tritium in the biosphere and calculates the radiological impact on individuals and the population due to the direct exposure and by the ingestion pathways. Processes such as the conversion of tritium gas into tritiated water (HTO) in the soil, re-emission after deposition and the conversion of HTO into organically bound tritium, are considered. The use of UFOTRI in its probabilistic mode shows the spectrum of the radiological impact together with the associated probability of occurrence. A first model version was established in 1991. As the ongoing work on investigating the main processes of the tritium behaviour in the environment shows up new results, the model has been improved in several points. The report describes the changes incorporated into the model since 1991. Additionally provides the up-dated user guide for handling the revised UFOTRI version which will be distributed to interested organizations. (orig.) [de

  15. Social cognition intervention in schizophrenia: Description of the training of affect recognition program - Indian version.

    Science.gov (United States)

    Thonse, Umesh; Behere, Rishikesh V; Frommann, Nicole; Sharma, Psvn

    2018-01-01

    Social cognition refers to mental operations involved in processing of social cues and includes the domains of emotion processing, Theory of Mind (ToM), social perception, social knowledge and attributional bias. Significant deficits in ToM, emotion perception and social perception have been demonstrated in schizophrenia which can have an impact on socio-occupational functioning. Intervention modules for social cognition have demonstrated moderate effect sizes for improving emotion identification and discrimination. We describe the Indian version of the Training of Affect Recognition (TAR) program and a pilot study to demonstrate the feasibility of administering this intervention program in the Indian population. We also discuss the cultural sensibilities in adopting an intervention program for the Indian setting. To the best of our knowledge this is the first intervention program for social cognition for use in persons with schizophrenia in India. Copyright © 2017 Elsevier B.V. All rights reserved.

  16. Regional hydrogeological simulations using CONECTFLOW. Preliminary site description. Laxemar sub area - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Hartley, Lee; Hunter, Fiona; Jackson, Peter; McCarthy, Rachel [Serco Assurance, Risley (United Kingdom); Gylling, Bjoern; Marsic, Niko [Kemakta Konsult AB, Stockholm (Sweden)

    2006-04-15

    The main objective of this study is to support the development of a preliminary Site Description of the Laxemar subarea on a regional-scale based on the available data of November 2004 (Data Freeze L1.2). A more specific objective of this study is to assess the role of both known and less quantified hydrogeological conditions in determining the present-day distribution of saline groundwater in the Laxemar subarea on a regional-scale. An improved understanding of the palaeo-hydrogeology is necessary in order to gain credibility for the Site Description in general and the hydrogeological description in particular. This is to serve as a basis for describing the present hydrogeological conditions on a local-scale, as well as predictions of future hydrogeological conditions. Another objective is to assess the flow-paths from the local-scale model domain, based on the present-day flow conditions, to assess the distribution of discharge and recharge areas connected to the flow at the approximate repository depth to inform the Preliminary Safety Evaluation. Significant new features incorporated in the modelling include: a depth variation in hydraulic properties within the deformation zones; a dependence on rock domain and depth in the rock mass properties in regional-scale models; a more detailed model of the overburden in terms of a layered system of spatially variable thickness made up of several different types of Quaternary deposits has been implemented; and several variants on the position of the watertable have been tried. The motivation for introducing a dependence on rock domain was guided by the hydrogeological interpretation with the aim of honouring the observed differences in hydraulic properties measured at the boreholes.

  17. Regional hydrogeological simulations using CONECTFLOW. Preliminary site description. Laxemar sub area - version 1.2

    International Nuclear Information System (INIS)

    Hartley, Lee; Hunter, Fiona; Jackson, Peter; McCarthy, Rachel; Gylling, Bjoern; Marsic, Niko

    2006-04-01

    The main objective of this study is to support the development of a preliminary Site Description of the Laxemar subarea on a regional-scale based on the available data of November 2004 (Data Freeze L1.2). A more specific objective of this study is to assess the role of both known and less quantified hydrogeological conditions in determining the present-day distribution of saline groundwater in the Laxemar subarea on a regional-scale. An improved understanding of the palaeo-hydrogeology is necessary in order to gain credibility for the Site Description in general and the hydrogeological description in particular. This is to serve as a basis for describing the present hydrogeological conditions on a local-scale, as well as predictions of future hydrogeological conditions. Another objective is to assess the flow-paths from the local-scale model domain, based on the present-day flow conditions, to assess the distribution of discharge and recharge areas connected to the flow at the approximate repository depth to inform the Preliminary Safety Evaluation. Significant new features incorporated in the modelling include: a depth variation in hydraulic properties within the deformation zones; a dependence on rock domain and depth in the rock mass properties in regional-scale models; a more detailed model of the overburden in terms of a layered system of spatially variable thickness made up of several different types of Quaternary deposits has been implemented; and several variants on the position of the watertable have been tried. The motivation for introducing a dependence on rock domain was guided by the hydrogeological interpretation with the aim of honouring the observed differences in hydraulic properties measured at the boreholes

  18. A description of the FAMOUS (version XDBUA climate model and control run

    Directory of Open Access Journals (Sweden)

    A. Osprey

    2008-12-01

    Full Text Available FAMOUS is an ocean-atmosphere general circulation model of low resolution, capable of simulating approximately 120 years of model climate per wallclock day using current high performance computing facilities. It uses most of the same code as HadCM3, a widely used climate model of higher resolution and computational cost, and has been tuned to reproduce the same climate reasonably well. FAMOUS is useful for climate simulations where the computational cost makes the application of HadCM3 unfeasible, either because of the length of simulation or the size of the ensemble desired. We document a number of scientific and technical improvements to the original version of FAMOUS. These improvements include changes to the parameterisations of ozone and sea-ice which alleviate a significant cold bias from high northern latitudes and the upper troposphere, and the elimination of volume-averaged drifts in ocean tracers. A simple model of the marine carbon cycle has also been included. A particular goal of FAMOUS is to conduct millennial-scale paleoclimate simulations of Quaternary ice ages; to this end, a number of useful changes to the model infrastructure have been made.

  19. Statistical model of fractures and deformation zones. Preliminary site description, Laxemar subarea, version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Hermanson, Jan; Forssberg, Ola [Golder Associates AB, Stockholm (Sweden); Fox, Aaron; La Pointe, Paul [Golder Associates Inc., Redmond, WA (United States)

    2005-10-15

    The goal of this summary report is to document the data sources, software tools, experimental methods, assumptions, and model parameters in the discrete-fracture network (DFN) model for the local model volume in Laxemar, version 1.2. The model parameters presented herein are intended for use by other project modeling teams. Individual modeling teams may elect to simplify or use only a portion of the DFN model, depending on their needs. This model is not intended to be a flow model or a mechanical model; as such, only the geometrical characterization is presented. The derivations of the hydraulic or mechanical properties of the fractures or their subsurface connectivities are not within the scope of this report. This model represents analyses carried out on particular data sets. If additional data are obtained, or values for existing data are changed or excluded, the conclusions reached in this report, and the parameter values calculated, may change as well. The model volume is divided into two subareas; one located on the Simpevarp peninsula adjacent to the power plant (Simpevarp), and one further to the west (Laxemar). The DFN parameters described in this report were determined by analysis of data collected within the local model volume. As such, the final DFN model is only valid within this local model volume and the modeling subareas (Laxemar and Simpevarp) within.

  20. PR-EDB: Power Reactor Embrittlement Data Base, Version 2. Revision 2, Program description

    Energy Technology Data Exchange (ETDEWEB)

    Stallmann, F.W.; Wang, J.A.; Kam, F.B.K.; Taylor, B.J. [Oak Ridge National Lab., TN (United States)

    1994-01-01

    Investigations of regulatory issues such as vessel integrity over plant life, vessel failure, and sufficiency of current codes Standard Review Plans (SRP`s) and Guides for license renewal can be greatly expedited by the use of a well-designed computerized data base. Also, such a data base is essential for the validation of embrittlement prediction models by researchers. The Power Reactor Embrittlement Data Base (PR-EDB) is such a comprehensive collection of data for US commercial nuclear reactors. The current version of the PR-EDB contains the Charpy test data that were irradiated in 252 capsules of 96 reactors and consists of 207 data points for heat-affected-zone (HAZ) materials (98 different HAZ), 227 data points for weld materials (105 different welds), 524 data points for base materials (136 different base materials), including 297 plate data points (85 different plates), 119 forging data points (31) different forging), and 108 correlation monitor materials data points (3 different plates). The data files are given in dBASE format and can be accessed with any computer using the DOS operating system. ``User-friendly`` utility programs are used to retrieve and select specific data, manipulate data, display data to the screen or printer, and to fit and plot Charpy impact data. The results of several studies investigated are presented in Appendix D.

  1. Preliminary site description: Groundwater flow simulations. Simpevarp area (version 1.1) modelled with CONNECTFLOW

    International Nuclear Information System (INIS)

    Hartley, Lee; Worth, David; Gylling, Bjoern; Marsic, Niko; Holmen, Johan

    2004-08-01

    The main objective of this study is to assess the role of known and unknown hydrogeological conditions for the present-day distribution of saline groundwater at the Simpevarp and Laxemar sites. An improved understanding of the paleo-hydrogeology is necessary in order to gain credibility for the Site Descriptive Model in general and the Site Hydrogeological Description in particular. This is to serve as a basis for describing the present hydrogeological conditions as well as predictions of future hydrogeological conditions. This objective implies a testing of: geometrical alternatives in the structural geology and bedrock fracturing, variants in the initial and boundary conditions, and parameter uncertainties (i.e. uncertainties in the hydraulic property assignment). This testing is necessary in order to evaluate the impact on the groundwater flow field of the specified components and to promote proposals of further investigations of the hydrogeological conditions at the site. The general methodology for modelling transient salt transport and groundwater flow using CONNECTFLOW that was developed for Forsmark has been applied successfully also for Simpevarp. Because of time constraints only a key set of variants were performed that focussed on the influences of DFN model parameters, the kinematic porosity, and the initial condition. Salinity data in deep boreholes available at the time of the project was too limited to allow a good calibration exercise. However, the model predictions are compared with the available data from KLX01 and KLX02 below. Once more salinity data is available it may be possible to draw more definite conclusions based on the differences between variants. At the moment though the differences should just be used understand the sensitivity of the models to various input parameters

  2. Description of the MOD2/85 versions of the RALOC/FIPLOC family. Pt. 1

    International Nuclear Information System (INIS)

    Jahn, H.; Weber, G.; Pham, T. v.

    1989-01-01

    This report describes the general philosophy of the RALOC/FIPLOC code family, the characteristics and the structure of the codes. The intention is to give an overall impression on the RALOC/FIPLOC code system, which can be applied to general containment problems (such as p-, T-calculation), special distribution considerations in subcompartmented geometries (for example H 2 , steam, air), aerosol distribution and behaviour (in containments, auxiliary buildings etc.) and multicompartment combustion (especially hydrogen). One of the major characteristics of these codes consists in the capability to investigate short and long term problems (up to several 100 days) and to calculate pressure and/or buoyancy driven convection within subcompartmented containments or single rooms. The modelling involves free or forced convection or their combination to give information on integral and local conditions. RALOC and FIPLOC are systems codes which may be applied to all types of containments and accidents but possibly also to other industrial or experimental facilities. These codes or further modifications could also be of interest for investigations of transport phenomena in piping systems, such as convection in a primary coolant system of a nuclear power plant during a severe accident. The description of RALOC and FIPLOC is given in a detailed form. (orig./HP)

  3. The global chemistry transport model TM5: description and evaluation of the tropospheric chemistry version 3.0

    Directory of Open Access Journals (Sweden)

    V. Huijnen

    2010-10-01

    Full Text Available We present a comprehensive description and benchmark evaluation of the tropospheric chemistry version of the global chemistry transport model TM5 (Tracer Model 5, version TM5-chem-v3.0. A full description is given concerning the photochemical mechanism, the interaction with aerosol, the treatment of the stratosphere, the wet and dry deposition parameterizations, and the applied emissions. We evaluate the model against a suite of ground-based, satellite, and aircraft measurements of components critical for understanding global photochemistry for the year 2006.

    The model exhibits a realistic oxidative capacity at a global scale. The methane lifetime is ~8.9 years with an associated lifetime of methyl chloroform of 5.86 years, which is similar to that derived using an optimized hydroxyl radical field.

    The seasonal cycle in observed carbon monoxide (CO is well simulated at different regions across the globe. In the Northern Hemisphere CO concentrations are underestimated by about 20 ppbv in spring and 10 ppbv in summer, which is related to missing chemistry and underestimated emissions from higher hydrocarbons, as well as to uncertainties in the seasonal variation of CO emissions. The model also captures the spatial and seasonal variation in formaldehyde tropospheric columns as observed by SCIAMACHY. Positive model biases over the Amazon and eastern United States point to uncertainties in the isoprene emissions as well as its chemical breakdown.

    Simulated tropospheric nitrogen dioxide columns correspond well to observations from the Ozone Monitoring Instrument in terms of its seasonal and spatial variability (with a global spatial correlation coefficient of 0.89, but TM5 fields are lower by 25–40%. This is consistent with earlier studies pointing to a high bias of 0–30% in the OMI retrievals, but uncertainties in the emission inventories have probably also contributed to the discrepancy.

    TM5 tropospheric

  4. Regional hydrogeological simulations. Numerical modelling using ConnectFlow. Preliminary site description Simpevarp sub area - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Hartley, Lee; Hoch, Andrew; Hunter, Fiona; Jackson, Peter [Serco Assurance, Risley (United Kingdom); Marsic, Niko [Kemakta Konsult, Stockholm (Sweden)

    2005-02-01

    objective of this study is to support the development of a preliminary Site Description of the Simpevarp area on a regional-scale based on the available data of August 2004 (Data Freeze S1.2) and the previous Site Description. A more specific objective of this study is to assess the role of known and unknown hydrogeological conditions for the present-day distribution of saline groundwater in the Simpevarp area on a regional-scale. An improved understanding of the paleo-hydrogeology is necessary in order to gain credibility for the Site Description in general and the hydrogeological description in particular. This is to serve as a basis for describing the present hydrogeological conditions on a local-scale as well as predictions of future hydrogeological conditions. Other key objectives were to identify the model domain required to simulate regional flow and solute transport at the Simpevarp area and to incorporate a new geological model of the deformation zones produced for Version S1.2.Another difference with Version S1.1 is the increased effort invested in conditioning the hydrogeological property models to the fracture boremap and hydraulic data. A new methodology was developed for interpreting the discrete fracture network (DFN) by integrating the geological description of the DFN (GeoDFN) with the hydraulic test data from Posiva Flow-Log and Pipe-String System double-packer techniques to produce a conditioned Hydro-DFN model. This was done in a systematic way that addressed uncertainties associated with the assumptions made in interpreting the data, such as the relationship between fracture transmissivity and length. Consistent hydraulic data was only available for three boreholes, and therefore only relatively simplistic models were proposed as there isn't sufficient data to justify extrapolating the DFN away from the boreholes based on rock domain, for example. Significantly, a far greater quantity of hydro-geochemical data was available for calibration in the

  5. Rock mechanics modelling of rock mass properties - summary of primary data. Preliminary site description Laxemar subarea - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Lanaro, Flavio [Berg Bygg Konsult AB, Solna (Sweden); Oehman, Johan; Fredriksson, Anders [Golder Associates AB, Uppsala (Sweden)

    2006-05-15

    The results presented in this report are the summary of the primary data for the Laxemar Site Descriptive Modelling version 1.2. At this stage, laboratory tests on intact rock and fracture samples from borehole KSH01A, KSH02A, KAV01 (already considered in Simpevarp SDM version 1.2) and borehole KLX02 and KLX04 were available. Concerning the mechanical properties of the intact rock, the rock type 'granite to quartz monzodiorite' or 'Aevroe granite' (code 501044) was tested for the first time within the frame of the site descriptive modelling. The average uniaxial compressive strength and Young's modulus of the granite to quartz to monzodiorite are 192 MPa and 72 GPa, respectively. The crack initiation stress is observed to be 0.5 times the uniaxial compressive strength for the same rock type. Non negligible differences are observed between the statistics of the mechanical properties of the granite to quartz monzodiorite in borehole KLX02 and KLX04. The available data on rock fractures were analysed to determine the mechanical properties of the different fracture sets at the site (based on tilt test results) and to determine systematic differences between the results obtained with different sample preparation techniques (based on direct shear tests). The tilt tests show that there are not significant differences of the mechanical properties due to the fracture orientation. Thus, all fracture sets seem to have the same strength and deformability. The average peak friction angle for the Coulomb's Criterion of the fracture sets varies between 33.6 deg and 34.1 deg, while the average cohesion ranges between 0.46 and 0.52 MPa, respectively. The average of the Coulomb's residual cohesion and friction angle vary in the ranges 28.0 deg - 29.2 deg and 0.40-0.45 MPa, respectively. The only significant difference could be observed on the average cohesion between fracture set S{sub A} and S{sub d}. The direct shear tests show that the

  6. SAFER CVIEW interface re-certification : description of re-certification process for CVISN stakeholders : version 1.0

    Science.gov (United States)

    2008-04-23

    In order to improve data quality in the SAFER system, two major software changes have been made in the recent SAFER releases. SAFER version 4.9, released in October 2005, has implemented data rules (SAFER CR 131) to support the requirements for manda...

  7. Thermal Site Descriptive Model. A strategy for the model development during site investigations. Version 1.0

    International Nuclear Information System (INIS)

    Sundberg, Jan

    2003-04-01

    Site investigations are in progress for the siting of a deep repository for spent nuclear fuel. As part of the planning work, strategies are developed for site descriptive modelling regarding different disciplines, amongst them the thermal conditions. The objective of the strategy for a thermal site descriptive model is to guide the practical implementation of evaluating site specific data during the site investigations. It is understood that further development may be needed. The model describes the thermal properties and other thermal parameters of intact rock, fractures and fracture zones, and of the rock mass. The methodology is based on estimation of thermal properties of intact rock and discontinuities, using both empirical and theoretical/numerical approaches, and estimation of thermal processes using mathematical modelling. The methodology will be used and evaluated for the thermal site descriptive modelling at the Aespoe Hard Rock Laboratory

  8. Description of Multimedia Environment Pollutant Assessment System (MEPAS) version 3.2 modification for the Nuclear Regulatory Commission

    Energy Technology Data Exchange (ETDEWEB)

    Buck, J.W.; Strenge, D.L.; Hoopes, B.L. [and others

    1997-11-01

    The Multimedia Environmental Pollutant Assessment System (MEPAS) is a software tool developed by Pacific Northwest National Laboratory (PNNL) for the U.S. Department of Energy (DOE) to allow DOE to conduct human health risk analyses nation-wide. This report describes modifications to the MEPAS to meet the requirements of the U.S. Nuclear Regulatory Commission (NRC) staff in their analyses of Site Decommissioning Management Plan sites. In general, these modifications provide the MEPAS, Version 3.2, with the capability of calculating and reporting annual dose/risk information. Modifications were made to the exposure pathway and health impact modules and the water and atmospheric transport modules. Several example cases used to test the MEPAS, Version 3.2, are also presented. The MEPAS, Version 3.2, also contains a new source-term release component that includes models for estimating contaminant loss from three different types of source zones (contaminated aquifer, contaminated pond/surface impoundment, and contaminated vadose zone) due to decay/degradation, leaching, wind suspension, water erosion, overland flow, and/or volatilization. When multiple loss routes are assumed to occur simultaneously, the models account for their interaction and calculate an appropriate pollutant mass budget to each loss route over time.

  9. Regional hydrogeological simulations for Forsmark - numerical modelling using CONNECTFLOW. Preliminary site description Forsmark area - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Hartley, Lee; Cox, Ian; Hunter, Fiona; Jackson, Peter; Joyce, Steve; Swift, Ben [Serco Assurance, Risley (United Kingdom); Gylling, Bjoern; Marsic, Niko [Kemakta Konsult AB, Stockholm (Sweden)

    2005-05-01

    The Swedish Nuclear Fuel and Waste Management Company (SKB) carries out site investigations in two different candidate areas in Sweden with the objective of describing the in-situ conditions for a bedrock repository for spent nuclear fuel. The site characterisation work is divided into two phases, an initial site investigation phase (IPLU) and a complete site investigation phase (KPLU). The results of IPLU are used as a basis for deciding on a subsequent KPLU phase. On the basis of the KPLU investigations a decision is made as to whether detailed characterisation will be performed (including sinking of a shaft). An integrated component in the site characterisation work is the development of site descriptive models. These comprise basic models in three dimensions with an accompanying text description. Central in the modelling work is the geological model, which provides the geometrical context in terms of a model of deformation zones and the rock mass between the zones. Using the geological and geometrical description models as a basis, descriptive models for other geo-disciplines (hydrogeology, hydro-geochemistry, rock mechanics, thermal properties and transport properties) will be developed. Great care is taken to arrive at a general consistency in the description of the various models and assessment of uncertainty and possible needs of alternative models. Here, a numerical model is developed on a regional-scale (hundreds of square kilometres) to understand the zone of influence for groundwater flow that affects the Forsmark area. Transport calculations are then performed by particle tracking from a local-scale release area (a few square kilometres) to identify potential discharge areas for the site and using greater grid resolution. The main objective of this study is to support the development of a preliminary Site Description of the Forsmark area on a regional-scale based on the available data of 30 June 2004 and the previous Site Description. A more specific

  10. Simulated pre-industrial climate in Bergen Climate Model (version 2: model description and large-scale circulation features

    Directory of Open Access Journals (Sweden)

    O. H. Otterå

    2009-11-01

    Full Text Available The Bergen Climate Model (BCM is a fully-coupled atmosphere-ocean-sea-ice model that provides state-of-the-art computer simulations of the Earth's past, present, and future climate. Here, a pre-industrial multi-century simulation with an updated version of BCM is described and compared to observational data. The model is run without any form of flux adjustments and is stable for several centuries. The simulated climate reproduces the general large-scale circulation in the atmosphere reasonably well, except for a positive bias in the high latitude sea level pressure distribution. Also, by introducing an updated turbulence scheme in the atmosphere model a persistent cold bias has been eliminated. For the ocean part, the model drifts in sea surface temperatures and salinities are considerably reduced compared to earlier versions of BCM. Improved conservation properties in the ocean model have contributed to this. Furthermore, by choosing a reference pressure at 2000 m and including thermobaric effects in the ocean model, a more realistic meridional overturning circulation is simulated in the Atlantic Ocean. The simulated sea-ice extent in the Northern Hemisphere is in general agreement with observational data except for summer where the extent is somewhat underestimated. In the Southern Hemisphere, large negative biases are found in the simulated sea-ice extent. This is partly related to problems with the mixed layer parametrization, causing the mixed layer in the Southern Ocean to be too deep, which in turn makes it hard to maintain a realistic sea-ice cover here. However, despite some problematic issues, the pre-industrial control simulation presented here should still be appropriate for climate change studies requiring multi-century simulations.

  11. Atmospheric radionuclide transport model with radon postprocessor and SBG module. Model description version 2.8.0; ARTM. Atmosphaerisches Radionuklid-Transport-Modell mit Radon Postprozessor und SBG-Modul. Modellbeschreibung zu Version 2.8.0

    Energy Technology Data Exchange (ETDEWEB)

    Richter, Cornelia; Sogalla, Martin; Thielen, Harald; Martens, Reinhard

    2015-04-20

    The study on the atmospheric radionuclide transport model with radon postprocessor and SBG module (model description version 2.8.0) covers the following issues: determination of emissions, radioactive decay, atmospheric dispersion calculation for radioactive gases, atmospheric dispersion calculation for radioactive dusts, determination of the gamma cloud radiation (gamma submersion), terrain roughness, effective source height, calculation area and model points, geographic reference systems and coordinate transformations, meteorological data, use of invalid meteorological data sets, consideration of statistical uncertainties, consideration of housings, consideration of bumpiness, consideration of terrain roughness, use of frequency distributions of the hourly dispersion situation, consideration of the vegetation period (summer), the radon post processor radon.exe, the SBG module, modeling of wind fields, shading settings.

  12. Statistical model of fractures and deformations zones for Forsmark. Preliminary site description Forsmark area - version 1.2

    International Nuclear Information System (INIS)

    La Pointe, Paul R.; Olofsson, Isabelle; Hermanson, Jan

    2005-04-01

    Compared to version 1.1, a much larger amount of data especially from boreholes is available. Both one-hole interpretation and Boremap indicate the presence of high and low fracture intensity intervals in the rock mass. The depth and width of these intervals varies from borehole to borehole but these constant fracture intensity intervals are contiguous and present quite sharp transitions. There is not a consistent pattern of intervals of high fracture intensity at or near to the surface. In many cases, the intervals of highest fracture intensity are considerably below the surface. While some fractures may have occurred or been reactivated in response to surficial stress relief, surficial stress relief does not appear to be a significant explanatory variable for the observed variations in fracture intensity. Data from the high fracture intensity intervals were extracted and statistical analyses were conducted in order to identify common geological factors. Stereoplots of fracture orientation versus depth for the different fracture intensity intervals were also produced for each borehole. Moreover percussion borehole data were analysed in order to identify the persistence of these intervals throughout the model volume. The main conclusions of these analyses are the following: The fracture intensity is conditioned by the rock domain, but inside a rock domain intervals of high and low fracture intensity are identified. The intervals of high fracture intensity almost always correspond to intervals with distinct fracture orientations (whether a set, most often the NW sub-vertical set, is highly dominant, or some orientation sets are missing). These high fracture intensity intervals are positively correlated to the presence of first and second generation minerals (epidote, calcite). No clear correlation for these fracture intensity intervals has been identified between holes. Based on these results the fracture frequency has been calculated in each rock domain for the

  13. Statistical model of fractures and deformations zones for Forsmark. Preliminary site description Forsmark area - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    La Pointe, Paul R. [Golder Associate Inc., Redmond, WA (United States); Olofsson, Isabelle; Hermanson, Jan [Golder Associates AB, Uppsala (Sweden)

    2005-04-01

    Compared to version 1.1, a much larger amount of data especially from boreholes is available. Both one-hole interpretation and Boremap indicate the presence of high and low fracture intensity intervals in the rock mass. The depth and width of these intervals varies from borehole to borehole but these constant fracture intensity intervals are contiguous and present quite sharp transitions. There is not a consistent pattern of intervals of high fracture intensity at or near to the surface. In many cases, the intervals of highest fracture intensity are considerably below the surface. While some fractures may have occurred or been reactivated in response to surficial stress relief, surficial stress relief does not appear to be a significant explanatory variable for the observed variations in fracture intensity. Data from the high fracture intensity intervals were extracted and statistical analyses were conducted in order to identify common geological factors. Stereoplots of fracture orientation versus depth for the different fracture intensity intervals were also produced for each borehole. Moreover percussion borehole data were analysed in order to identify the persistence of these intervals throughout the model volume. The main conclusions of these analyses are the following: The fracture intensity is conditioned by the rock domain, but inside a rock domain intervals of high and low fracture intensity are identified. The intervals of high fracture intensity almost always correspond to intervals with distinct fracture orientations (whether a set, most often the NW sub-vertical set, is highly dominant, or some orientation sets are missing). These high fracture intensity intervals are positively correlated to the presence of first and second generation minerals (epidote, calcite). No clear correlation for these fracture intensity intervals has been identified between holes. Based on these results the fracture frequency has been calculated in each rock domain for the

  14. Regional hydrogeological simulations for Forsmark - numerical modelling using DarcyTools. Preliminary site description Forsmark area version 1.2

    International Nuclear Information System (INIS)

    Follin, Sven; Stigsson, Martin; Svensson, Urban

    2005-12-01

    A numerical model is developed on a regional-scale (hundreds of square kilometres) to study the zone of influence for variable-density groundwater flow that affects the Forsmark area. Transport calculations are performed by particle tracking from a local-scale release area (a few square kilometres) to test the sensitivity to different hydrogeological uncertainties and the need for far-field realism. The main objectives of the regional flow modelling were to achieve the following: I. Palaeo-hydrogeological understanding: An improved understanding of the palaeohydrogeological conditions is necessary in order to gain credibility for the site descriptive model in general and the hydrogeological description in particular. This requires modelling of the groundwater flow from the last glaciation up to present-day with comparisons against measured TDS and other hydro-geochemical measures. II. Simulation of flow paths: The simulation and visualisation of flow paths from a tentative repository area is a means for describing the role of the current understanding of the modelled hydrogeological conditions in the target volume, i.e. the conditions of primary interest for Safety Assessment. Of particular interest here is demonstration of the need for detailed far-field realism in the numerical simulations. The motivation for a particular model size (and resolution) and set of boundary conditions for a realistic description of the recharge and discharge connected to the flow at repository depth is an essential part of the groundwater flow path simulations. The numerical modelling was performed by two separate modelling teams, the ConnectFlow Team and the DarcyTools Team. The work presented in this report was based on the computer code DarcyTools developed by Computer-aided Fluid Engineering. DarcyTools is a kind of equivalent porous media (EPM) flow code specifically designed to treat flow and salt transport in sparsely fractured crystalline rock intersected by transmissive

  15. Regional hydrogeological simulations for Forsmark - numerical modelling using DarcyTools. Preliminary site description Forsmark area version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-12-15

    A numerical model is developed on a regional-scale (hundreds of square kilometres) to study the zone of influence for variable-density groundwater flow that affects the Forsmark area. Transport calculations are performed by particle tracking from a local-scale release area (a few square kilometres) to test the sensitivity to different hydrogeological uncertainties and the need for far-field realism. The main objectives of the regional flow modelling were to achieve the following: I. Palaeo-hydrogeological understanding: An improved understanding of the palaeohydrogeological conditions is necessary in order to gain credibility for the site descriptive model in general and the hydrogeological description in particular. This requires modelling of the groundwater flow from the last glaciation up to present-day with comparisons against measured TDS and other hydro-geochemical measures. II. Simulation of flow paths: The simulation and visualisation of flow paths from a tentative repository area is a means for describing the role of the current understanding of the modelled hydrogeological conditions in the target volume, i.e. the conditions of primary interest for Safety Assessment. Of particular interest here is demonstration of the need for detailed far-field realism in the numerical simulations. The motivation for a particular model size (and resolution) and set of boundary conditions for a realistic description of the recharge and discharge connected to the flow at repository depth is an essential part of the groundwater flow path simulations. The numerical modelling was performed by two separate modelling teams, the ConnectFlow Team and the DarcyTools Team. The work presented in this report was based on the computer code DarcyTools developed by Computer-aided Fluid Engineering. DarcyTools is a kind of equivalent porous media (EPM) flow code specifically designed to treat flow and salt transport in sparsely fractured crystalline rock intersected by transmissive

  16. Description of input and examples for PHREEQC version 3: a computer program for speciation, batch-reaction, one-dimensional transport, and inverse geochemical calculations

    Science.gov (United States)

    Parkhurst, David L.; Appelo, C.A.J.

    2013-01-01

    used in other programs that need to implement geochemical calculations; for example, transport codes. Charting capabilities have been added to some versions of PHREEQC. Charting capabilities have been added to Windows distributions of PHREEQC version 3. (Charting on Linux requires installation of Wine.) The keyword data block USER_GRAPH allows selection of data for plotting and manipulation of chart appearance. Almost any results from geochemical simulations (for example, concentrations, activities, or saturation indices) can be retrieved by using Basic language functions and specified as data for plotting in USER_GRAPH. Results of transport simulations can be plotted against distance or time. Data can be added to a chart from tab-separated-values files. All input for PHREEQC version 3 is defined in keyword data blocks, each of which may have a series of identifiers for specific types of data. This report provides a complete description of each keyword data block and its associated identifiers. Input files for 22 examples that demonstrate most of the capabilities of PHREEQC version 3 are described and the results of the example simulations are presented and discussed.

  17. Land Boundary Conditions for the Goddard Earth Observing System Model Version 5 (GEOS-5) Climate Modeling System: Recent Updates and Data File Descriptions

    Science.gov (United States)

    Mahanama, Sarith P.; Koster, Randal D.; Walker, Gregory K.; Takacs, Lawrence L.; Reichle, Rolf H.; De Lannoy, Gabrielle; Liu, Qing; Zhao, Bin; Suarez, Max J.

    2015-01-01

    The Earths land surface boundary conditions in the Goddard Earth Observing System version 5 (GEOS-5) modeling system were updated using recent high spatial and temporal resolution global data products. The updates include: (i) construction of a global 10-arcsec land-ocean lakes-ice mask; (ii) incorporation of a 10-arcsec Globcover 2009 land cover dataset; (iii) implementation of Level 12 Pfafstetter hydrologic catchments; (iv) use of hybridized SRTM global topography data; (v) construction of the HWSDv1.21-STATSGO2 merged global 30 arc second soil mineral and carbon data in conjunction with a highly-refined soil classification system; (vi) production of diffuse visible and near-infrared 8-day MODIS albedo climatologies at 30-arcsec from the period 2001-2011; and (vii) production of the GEOLAND2 and MODIS merged 8-day LAI climatology at 30-arcsec for GEOS-5. The global data sets were preprocessed and used to construct global raster data files for the software (mkCatchParam) that computes parameters on catchment-tiles for various atmospheric grids. The updates also include a few bug fixes in mkCatchParam, as well as changes (improvements in algorithms, etc.) to mkCatchParam that allow it to produce tile-space parameters efficiently for high resolution AGCM grids. The update process also includes the construction of data files describing the vegetation type fractions, soil background albedo, nitrogen deposition and mean annual 2m air temperature to be used with the future Catchment CN model and the global stream channel network to be used with the future global runoff routing model. This report provides detailed descriptions of the data production process and data file format of each updated data set.

  18. Variable-density groundwater flow simulations and particle tracking. Numerical modelling using DarcyTools. Preliminary site description of the Simpevarp area, version 1.1

    Energy Technology Data Exchange (ETDEWEB)

    Follin, Sven [SF GeoLogic AB, Stockholm (Sweden); Stigsson, Martin; Berglund, Sten [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden); Svensson, Urban [Computer-aided Fluid Engineering AB, Norrkoeping (Sweden)

    2004-12-01

    SKB is conducting site investigations for a high-level nuclear waste repository in fractured crystalline rocks at two coastal areas in Sweden, Forsmark and Simpevarp. The investigations started in 2002 and have been planned since the late 1990s. The work presented here investigates the possibility of using hydrogeochemical measurements in deep boreholes to reduce parameter uncertainty in a regional modelling of groundwater flow in fractured rock. The work was conducted with the aim of improving the palaeohydrogeological understanding of the Simpevarp area and to give recommendations to the preparations of the next version of the Preliminary Site Description (1.2). The study is based on a large number of numerical simulations of transient variable density groundwater flow through a strongly heterogeneous and anisotropic medium. The simulations were conducted with the computer code DarcyTools, the development of which has been funded by SKB. DarcyTools is a flexible porous media code specifically designed to treat groundwater flow and salt transport in sparsely fractured crystalline rock and it is noted that some of the features presented in this report are still under development or subjected to testing and verification. The simulations reveal the sensitivity of the results to different hydrogeological modelling assumptions, e.g. the sensitivity to the initial groundwater conditions at 10,000 BC, the size of the model domain and boundary conditions, and the hydraulic properties of deterministically and stochastically modelled deformation zones. The outcome of these simulations was compared with measured salinities and calculated relative proportions of different water types (mixing proportions) from measurements in two deep core drilled boreholes in the Laxemar subarea. In addition to the flow simulations, the statistics of flow related transport parameters were calculated for particle flowpaths from repository depth to ground surface for two subareas within the

  19. PERPEST Version 1.0, manual and technical description; a model that predicts the ecological risks of pesticides in freshwater ecosystems

    NARCIS (Netherlands)

    Nes, van E.H.; Brink, van den P.J.

    2003-01-01

    This report is a technical description and a user-manual of the PERPEST model, able to Predicts the Ecological Risks of PESTicides in freshwater ecosystems. This system predicts the effects of a particular concentration of a pesticide on various (community) endpoints, based on empirical data

  20. GOCI Yonsei aerosol retrieval version 2 aerosol products: improved algorithm description and error analysis with uncertainty estimation from 5-year validation over East Asia

    Science.gov (United States)

    Choi, M.; Kim, J.; Lee, J.; KIM, M.; Park, Y. J.; Holben, B. N.; Eck, T. F.; Li, Z.; Song, C. H.

    2017-12-01

    The Geostationary Ocean Color Imager (GOCI) Yonsei aerosol retrieval (YAER) version 1 algorithm was developed for retrieving hourly aerosol optical depth at 550 nm (AOD) and other subsidiary aerosol optical properties over East Asia. The GOCI YAER AOD showed comparable accuracy compared to ground-based and other satellite-based observations, but still had errors due to uncertainties in surface reflectance and simple cloud masking. Also, it was not capable of near-real-time (NRT) processing because it required a monthly database of each year encompassing the day of retrieval for the determination of surface reflectance. This study describes the improvement of GOCI YAER algorithm to the version 2 (V2) for NRT processing with improved accuracy from the modification of cloud masking, surface reflectance determination using multi-year Rayleigh corrected reflectance and wind speed database, and inversion channels per surface conditions. Therefore, the improved GOCI AOD ( ) is similar with those of Moderate Resolution Imaging Spectroradiometer (MODIS) and Visible Infrared Imaging Radiometer Suite (VIIRS) AOD compared to V1 of the YAER algorithm. The shows reduced median bias and increased ratio within range (i.e. absolute expected error range of MODIS AOD) compared to V1 in the validation results using Aerosol Robotic Network (AERONET) AOD ( ) from 2011 to 2016. The validation using the Sun-Sky Radiometer Observation Network (SONET) over China also shows similar results. The bias of error ( is within -0.1 and 0.1 range as a function of AERONET AOD and AE, scattering angle, NDVI, cloud fraction and homogeneity of retrieved AOD, observation time, month, and year. Also, the diagnostic and prognostic expected error (DEE and PEE, respectively) of are estimated. The estimated multiple PEE of GOCI V2 AOD is well matched with actual error over East Asia, and the GOCI V2 AOD over Korea shows higher ratio within PEE compared to over China and Japan. Hourly AOD products based on the

  1. E4CHEM. A simulation program for the fate of chemicals in the environment. Handbook. User`s guide and description. Version 3.6. December 1995

    Energy Technology Data Exchange (ETDEWEB)

    Brueggemann, R. [GSF - Forschungszentrum fuer Umwelt und Gesundheit Neuherberg GmbH, Oberschleissheim (Germany). Projektgruppe Umweltgefaehrdungspotentiale von Chemikalien; Drescher-Kaden, U. [GSF - Forschungszentrum fuer Umwelt und Gesundheit Neuherberg GmbH, Oberschleissheim (Germany). Projektgruppe Umweltgefaehrdungspotentiale von Chemikalien; Muenzer, B. [GSF - Forschungszentrum fuer Umwelt und Gesundheit Neuherberg GmbH, Oberschleissheim (Germany). Projektgruppe Umweltgefaehrdungspotentiale von Chemikalien

    1996-02-01

    The predominant aims of E4CHEM are: Deterministic description of the chemical`s behavior in the environment with varying ecoparameters including the special aspects; Behavior of the same chemical in different compartments; Behavior of different chemicals in the same compartment with the same ecoparameters; Tracing back of chemicals detected in the environment to the possible source by means of check procedures like in EXWAT, one of the E4CHEM models; Discharge of the user from extensive calculation operations; Interpretation of experimental results. In combination with statistics and algebraic tools (lattice theory) but not included in E4CHEM yet: Selection of descriptors as tool for priority setting; Identification and ranking of chemicals according to their risk to the environment by comparing descriptors within descriptor matrices about the behavior of chemicals deived from the different models. Furthermore: Identification of chemical applicable as reference substances with respect to environmental behavior. The program E4CHEM is described in this manual. (orig./SR)

  2. Version Description and Installation Guide Kernel Version 3.0

    Science.gov (United States)

    1989-12-01

    0065_SKI CIo firth irupt encaps not save/restore flt context I0066-SKI CO firth modify LL .being/end atomic 0067-Z CKIO firth irupt encaps forgot to use...performance imrovements 0076 -SRI una TZQ performance iziprovements 0077 -SRI una CM. alic dev rovr doesn’t check i~f local PID 0078 SRI una DM. alice

  3. Software test plan/description/report (STP/STD/STR) for the enhanced logistics intratheater support tool (ELIST) global data segment. Version 8.1.0.0, Database Instance Segment Version 8.1.0.0, ...[elided] and Reference Data Segment Version 8.1.0.0 for Solaris 7; TOPICAL

    International Nuclear Information System (INIS)

    Dritz, K.; Absil-Mills, M.; Jacobs, K.

    2002-01-01

    This document is the Software Test Plan/Description/Report (STP/STD/STR) for the DII COE Enhanced Logistics Intratheater Support Tool (ELIST) mission application. It combines in one document the information normally presented separately in a Software Test Plan, a Software Test Description, and a Software Test Report; it also presents this information in one place for all the segments of the ELIST mission application. The primary purpose of this document is to show that ELIST has been tested by the developer and found, by that testing, to install, deinstall, and work properly. The information presented here is detailed enough to allow the reader to repeat the testing independently. The remainder of this document is organized as follows. Section 1.1 identifies the ELIST mission application. Section 2 is the list of all documents referenced in this document. Section 3, the Software Test Plan, outlines the testing methodology and scope-the latter by way of a concise summary of the tests performed. Section 4 presents detailed descriptions of the tests, along with the expected and observed results; that section therefore combines the information normally found in a Software Test Description and a Software Test Report. The remaining small sections present supplementary information. Throughout this document, the phrase ELIST IP refers to the Installation Procedures (IP) for the Enhanced Logistics Intratheater Support Tool (ELIST) Global Data Segment, Database Instance Segment, Database Fill Segment, Database Segment, Database Utility Segment, Software Segment, and Reference Data Segment

  4. Olkiluoto site description 2011

    International Nuclear Information System (INIS)

    2012-12-01

    This fourth version of the Olkiluoto Site Report, produced by the OMTF (Olkiluoto Modelling Task Force), updates the Olkiluoto Site Report 2008 with the data and knowledge obtained up to December 2010. A descriptive model of the site (the Site Descriptive Model, SDM), i.e. a model describing the geological and hydrogeological structure of the site, properties of the bedrock and the groundwater and its flow, and the associated interacting processes and mechanisms. The SDM is divided into six parts: surface system, geology, rock mechanics, hydrogeology, hydrogeochemistry and transport properties

  5. CRAC2 model description

    International Nuclear Information System (INIS)

    Ritchie, L.T.; Alpert, D.J.; Burke, R.P.; Johnson, J.D.; Ostmeyer, R.M.; Aldrich, D.C.; Blond, R.M.

    1984-03-01

    The CRAC2 computer code is a revised version of CRAC (Calculation of Reactor Accident Consequences) which was developed for the Reactor Safety Study. This document provides an overview of the CRAC2 code and a description of each of the models used. Significant improvements incorporated into CRAC2 include an improved weather sequence sampling technique, a new evacuation model, and new output capabilities. In addition, refinements have been made to the atmospheric transport and deposition model. Details of the modeling differences between CRAC2 and CRAC are emphasized in the model descriptions

  6. Olkiluoto site description 2011

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-12-15

    This fourth version of the Olkiluoto Site Report, produced by the OMTF (Olkiluoto Modelling Task Force), updates the Olkiluoto Site Report 2008 with the data and knowledge obtained up to December 2010. A descriptive model of the site (the Site Descriptive Model, SDM), i.e. a model describing the geological and hydrogeological structure of the site, properties of the bedrock and the groundwater and its flow, and the associated interacting processes and mechanisms. The SDM is divided into six parts: surface system, geology, rock mechanics, hydrogeology, hydrogeochemistry and transport properties.

  7. Rock types and ductile structures on a rock domain basis, and fracture orientation and mineralogy on a deformation zone basis. Preliminary site description. Forsmark area - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Stephens, Michael [Geological Survey of Sweden, Uppsala (Sweden); Forssberg, Ola [Golder Associates AB, Uppsala (Sweden)

    2006-09-15

    This report presents the results of the analysis of base geological data in order to establish the dominant rock type, the subordinate rock types and the orientation of ductile mineral fabrics within each rock domain included in the regional geological model, version 1.2. An assessment of the degree of homogeneity of each domain is also provided. The analytical work has utilised the presentation of data in the form of histograms and stereographic projections. Fisher means and K values or best-fit great circles and corresponding pole values have been calculated for the ductile structural data. These values have been used in the geometric modelling of rock domains in the regional model, version 1.2. Furthermore, all analytical results have been used in the assignment of properties to rock domains in this model. A second analytical component reported here addresses the orientation and mineralogy of fractures in the deterministic deformation zones that are included in the regional geological model, version 1.2. The analytical work has once again utilised the presentation of data in the form of histograms and stereographic projections. Fisher means and K values are presented for the orientation of fracture sets in the deterministic deformation zones that have been identified with the help of new borehole data. The frequencies of occurrence of different minerals along the fractures in these deformation zones as well as the orientation of fractures in the zones, along which different minerals occur, are also presented. The results of the analyses have been used in the establishment of a conceptual structural model for the Forsmark site and in the assignment of properties to deterministic deformation zones in model version 1.2.

  8. Descriptive Research

    DEFF Research Database (Denmark)

    Wigram, Anthony Lewis

    2003-01-01

    Descriptive research is described by Lathom-Radocy and Radocy (1995) to include Survey research, ex post facto research, case studies and developmental studies. Descriptive research also includes a review of the literature in order to provide both quantitative and qualitative evidence of the effect...... starts will allow effect size calculations to be made in order to evaluate effect over time. Given the difficulties in undertaking controlled experimental studies in the creative arts therapies, descriptive research methods offer a way of quantifying effect through descriptive statistical analysis...

  9. Reliability of semiology description.

    Science.gov (United States)

    Heo, Jae-Hyeok; Kim, Dong Wook; Lee, Seo-Young; Cho, Jinwhan; Lee, Sang-Kun; Nam, Hyunwoo

    2008-01-01

    Seizure semiology is important for classifying patients' epilepsy. Physicians usually get most of the seizure information from observers though there have been few reports on the reliability of the observers' description. This study aims at determining the reliability of observers' description of the semiology. We included 92 patients who had their habitual seizures recorded during video-EEG monitoring. We compared the semiology described by the observers with that recorded on the videotape, and reviewed which characteristics of the observers affected the reliability of their reported data. The classification of seizures and the individual components of the semiology based only on the observer-description was somewhat discordant compared with the findings from the videotape (correct classification, 85%). The descriptions of some ictal behaviors such as oroalimentary automatism, tonic/dystonic limb posturing, and head versions were relatively accurate, but those of motionless staring and hand automatism were less accurate. The specified directions by the observers were relatively correct. The accuracy of the description was related to the educational level of the observers. Much of the information described by well-educated observers is reliable. However, every physician should keep in mind the limitations of this information and use this information cautiously.

  10. Version E2 from Dimco-System for the statistical calculation of components

    International Nuclear Information System (INIS)

    Moreno Gonzalez, A.

    1981-01-01

    A short description of the general system Dimco, together with a detailed description of E2 version are presented. E2 version is a two-dimensional finite element structural code. To illustrate the posibilities of E2 version, some results obtained with this new version are presented. These results are related with the following behaviour of the material: a) elastic, b) thermo-elastic, c) Plastic and d) creep. (author)

  11. CRACUK model description (appendices to the CRAC2 model description)

    International Nuclear Information System (INIS)

    Nixon, W.; Egan, M.J.

    1986-08-01

    The CRACUK computer code is a revised version of the US consequence modelling code CRAC2, adapted to suit UK requirements. The revisions include modifications to the models for spatial interval representation, weather sequence sampling, atmospheric dispersion, dosimetry and countermeasures. This document describes, in the form of appendices to the CRAC2 model description, each of the revisions made to the original model which collectively distinguish CRACUK from CRAC2. (author)

  12. [External cephalic version].

    Science.gov (United States)

    Navarro-Santana, B; Duarez-Coronado, M; Plaza-Arranz, J

    2016-08-01

    To analyze the rate of successful external cephalic versions in our center and caesarean sections that would be avoided with the use of external cephalic versions. From January 2012 to March 2016 external cephalic versions carried out at our center, which were a total of 52. We collected data about female age, gestational age at the time of the external cephalic version, maternal body mass index (BMI), fetal variety and situation, fetal weight, parity, location of the placenta, amniotic fluid index (ILA), tocolysis, analgesia, and newborn weight at birth, minor adverse effects (dizziness, hypotension and maternal pain) and major adverse effects (tachycardia, bradycardia, decelerations and emergency cesarean section). 45% of the versions were unsuccessful and 55% were successful. The percentage of successful vaginal delivery in versions was 84% (4% were instrumental) and 15% of caesarean sections. With respect to the variables studied, only significant differences in birth weight were found; suggesting that birth weight it is related to the outcome of external cephalic version. Probably we did not find significant differences due to the number of patients studied. For women with breech presentation, we recommend external cephalic version before the expectant management or performing a cesarean section. The external cephalic version increases the proportion of fetuses in cephalic presentation and also decreases the rate of caesarean sections.

  13. Iranian version of a face version of the Modified Child Dental Anxiety Scale: Transcultural adaptation and reliability analysis*

    OpenAIRE

    Javadinejad, Shahrzad; Farajzadegan, Ziba; Madahain, Marzieh

    2011-01-01

    Background: A novel version of the Modified Child Dental Anxiety Scale (MCDAS) was developed by addition of faces rating scale to the original numeric form. The aim of this prospective descriptive study was to perform a transcultural adaptation and reliability analysis of the Iranian version of Faces version of Modified Child Dental Anxiety Scale (MCDAS f ) and the Dental Subscale of the Children′s Fear Survey Schedule (CFSS-DS). Methods: To determine the test-retest reliability, 200 scho...

  14. Versioning Complex Data

    Energy Technology Data Exchange (ETDEWEB)

    Macduff, Matt C.; Lee, Benno; Beus, Sherman J.

    2014-06-29

    Using the history of ARM data files, we designed and demonstrated a data versioning paradigm that is feasible. Assigning versions to sets of files that are modified with some special assumptions and domain specific rules was effective in the case of ARM data, which has more than 5000 datastreams and 500TB of data.

  15. SWEPP Assay System Version 2.0 software design description

    Energy Technology Data Exchange (ETDEWEB)

    East, L.V.; Marwil, E.S.

    1996-08-01

    The Idaho National Engineering Laboratory (INEL) Stored Waste Examination Pilot Plant (SWEPP) operations staff use nondestructive analysis methods to characterize the radiological contents of contact-handled radioactive waste containers. Containers of waste from Rocky Flats Environmental Technology Site and other Department of Energy (DOE) sites are currently stored at SWEPP. Before these containers can be shipped to the Waste Isolation Pilot Plant (WIPP), SWEPP must verify compliance with storage, shipping, and disposal requirements. This program has been in operation since 1985 at the INEL Radioactive Waste Management Complex (RWMC). One part of the SWEPP program measures neutron emissions from the containers and estimates the mass of plutonium and other transuranic (TRU) isotopes present. A Passive/Active Neutron (PAN) assay system developed at the Los Alamos National Laboratory is used to perform these measurements. A computer program named NEUT2 was originally used to perform the data acquisition and reduction functions for the neutron measurements. This program was originally developed at Los Alamos and extensively modified by a commercial vendor of PAN systems and by personnel at the INEL. NEUT2 uses the analysis methodology outlined, but no formal documentation exists on the program itself. The SWEPP Assay System (SAS) computer program replaced the NEUT2 program in early 1994. The SAS software was developed using an `object model` approach and is documented in accordance with American National Standards Institute (ANSI) and Institute of Electrical and Electronic Engineers (IEEE) standards. The new program incorporates the basic analysis algorithms found in NEUT2. Additional functionality and improvements include a graphical user interface, the ability to change analysis parameters without program code modification, an `object model` design approach and other features for improved flexibility and maintainability.

  16. IDC Use Case Model Survey Version 1.0.

    Energy Technology Data Exchange (ETDEWEB)

    Carr, Dorthe B.; Harris, James M.

    2014-12-01

    This document contains the brief descriptions for the actors and use cases contained in the IDC Use Case Model Survey. REVISIONS Version Date Author/Team Revision Description Authorized by V1.0 12/2014 IDC Re- engineering Project Team Initial delivery M. Harris

  17. IDC Use Case Model Survey Version 1.1.

    Energy Technology Data Exchange (ETDEWEB)

    Harris, James Mark [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Carr, Dorthe B. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-02-01

    This document contains the brief descriptions for the actors and use cases contained in the IDC Use Case Model. REVISIONS Version Date Author/Team Revision Description Authorized by V1.0 12/2014 SNL IDC Reengineering Project Team Initial delivery M. Harris V1.1 2/2015 SNL IDC Reengineering Project Team Iteration I2 Review Comments M. Harris

  18. Nuclear criticality safety handbook. Version 2

    International Nuclear Information System (INIS)

    1999-03-01

    The Nuclear Criticality Safety Handbook, Version 2 essentially includes the description of the Supplement Report to the Nuclear Criticality Safety Handbook, released in 1995, into the first version of Nuclear Criticality Safety Handbook, published in 1988. The following two points are new: (1) exemplifying safety margins related to modelled dissolution and extraction processes, (2) describing evaluation methods and alarm system for criticality accidents. Revision is made based on previous studies for the chapter that treats modelling the fuel system: e.g., the fuel grain size that the system can be regarded as homogeneous, non-uniformity effect of fuel solution, and burnup credit. This revision solves the inconsistencies found in the first version between the evaluation of errors found in JACS code system and criticality condition data that were calculated based on the evaluation. (author)

  19. Version 2 of RSXMULTI

    International Nuclear Information System (INIS)

    Heinicke, P.; Berg, D.; Constanta-Fanourakis, P.; Quigg, E.K.

    1985-01-01

    MULTI is a general purpose, high speed, high energy physics interface to data acquisition and data investigation system that runs on PDP-11 and VAX architecture. This paper describes the latest version of MULTI, which runs under RSX-11M version 4.1 and supports a modular approach to the separate tasks that interface to it, allowing the same system to be used in single CPU test beam experiments as well as multiple interconnected CPU, large scale experiments. MULTI uses CAMAC (IEE-583) for control and monitoring of an experiment, and is written in FORTRAN-77 and assembler. The design of this version, which simplified the interface between tasks, and eliminated the need for a hard to maintain homegrown I/O system is also discussed

  20. Determining Optimal Decision Version

    Directory of Open Access Journals (Sweden)

    Olga Ioana Amariei

    2014-06-01

    Full Text Available In this paper we start from the calculation of the product cost, applying the method of calculating the cost of hour- machine (THM, on each of the three cutting machines, namely: the cutting machine with plasma, the combined cutting machine (plasma and water jet and the cutting machine with a water jet. Following the calculation of cost and taking into account the precision of manufacturing of each machine, as well as the quality of the processed surface, the optimal decisional version needs to be determined regarding the product manufacturing. To determine the optimal decisional version, we resort firstly to calculating the optimal version on each criterion, and then overall using multiattribute decision methods.

  1. Versioning of printed products

    Science.gov (United States)

    Tuijn, Chris

    2005-01-01

    During the definition of a printed product in an MIS system, a lot of attention is paid to the production process. The MIS systems typically gather all process-related parameters at such a level of detail that they can determine what the exact cost will be to make a specific product. This information can then be used to make a quote for the customer. Considerably less attention is paid to the content of the products since this does not have an immediate impact on the production costs (assuming that the number of inks or plates is known in advance). The content management is typically carried out either by the prepress systems themselves or by dedicated workflow servers uniting all people that contribute to the manufacturing of a printed product. Special care must be taken when considering versioned products. With versioned products we here mean distinct products that have a number of pages or page layers in common. Typical examples are comic books that have to be printed in different languages. In this case, the color plates can be shared over the different versions and the black plate will be different. Other examples are nation-wide magazines or newspapers that have an area with regional pages or advertising leaflets in different languages or currencies. When considering versioned products, the content will become an important cost factor. First of all, the content management (and associated proofing and approval cycles) becomes much more complex and, therefore, the risk that mistakes will be made increases considerably. Secondly, the real production costs are very much content-dependent because the content will determine whether plates can be shared across different versions or not and how many press runs will be needed. In this paper, we will present a way to manage different versions of a printed product. First, we will introduce a data model for version management. Next, we will show how the content of the different versions can be supplied by the customer

  2. UN-EDITED VERSION

    Indian Academy of Sciences (India)

    27

    Picasa (version 3.0). 2.4 Statistical analysis. As ambient water temperature during experimentation was 24°C, the group exposed to this temperature was considered as a control. A number of males and females (sex ratio) obtained in all remaining groups was compared with the control. Embryos and tadpoles exposed to ...

  3. Version control with Git

    CERN Document Server

    Loeliger, Jon

    2012-01-01

    Get up to speed on Git for tracking, branching, merging, and managing code revisions. Through a series of step-by-step tutorials, this practical guide takes you quickly from Git fundamentals to advanced techniques, and provides friendly yet rigorous advice for navigating the many functions of this open source version control system. This thoroughly revised edition also includes tips for manipulating trees, extended coverage of the reflog and stash, and a complete introduction to the GitHub repository. Git lets you manage code development in a virtually endless variety of ways, once you understand how to harness the system's flexibility. This book shows you how. Learn how to use Git for several real-world development scenarios ; Gain insight into Git's common-use cases, initial tasks, and basic functions ; Use the system for both centralized and distributed version control ; Learn how to manage merges, conflicts, patches, and diffs ; Apply advanced techniques such as rebasing, hooks, and ways to handle submodu...

  4. EASI graphics - Version II

    International Nuclear Information System (INIS)

    Allensworth, J.A.

    1984-04-01

    EASI (Estimate of Adversary Sequence Interruption) is an analytical technique for measuring the effectiveness of physical protection systems. EASI Graphics is a computer graphics extension of EASI which provides a capability for performing sensitivity and trade-off analyses of the parameters of a physical protection system. This document reports on the implementation of the Version II of EASI Graphics and illustrates its application with some examples. 5 references, 15 figures, 6 tables

  5. Global Historical Climatology Network (GHCN), Version 1 (Version Superseded)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Please note, this dataset has been superseded by a newer version (see below). Users should not use this version except in rare cases (e.g., when reproducing previous...

  6. Olkiluoto site description 2004

    International Nuclear Information System (INIS)

    2005-05-01

    This Olkiluoto Site Description 2004 is a description of the Olkiluoto site, in which the various disciplines have been integrated to produce a coherent picture, and is based on the data available prior to the start of the underground excavation of the ONKALO facility. This report is the first version of such a Site Report and supplements the site syntheses that have already been published. Further Site Reports will be produced on a regular basis and it is planned that the Site Report should form the geoscientific basis of the Safety Case in a future licence application. The report updates the Baseline report published in 2003 and is designed to produce an integrated site model, by focusing on interdisciplinary interactions, and also by including new data obtained during 2003 and 2004. The report has been produced by the OMTF (Olkiluoto Modelling Task Force), which covers the areas of geology, rock mechanics, hydrogeology and hydrogeochemistry. In addition to discussing the input from these four disciplines, the Site Report also includes a description of the surface conditions. Formally, the surface conditions are not within the remit of the OMTF, which is concentrating on modelling the bedrock around the ONKALO and the future repository. The influence of the surface conditions to the overall system and to the conditions at depth is recognised, however, and thus a summary of climate, ecosystems and overburden properties is also included in this report. Chapter 1 sets out the methodology to be used in the modelling, describes the various discipline-specific models which are developed and the modelled areas which are used, and also describes two important processes - the prediction/outcome studies and the uncertainty and confidence assessment. The difference between the estimate (the prediction) and the result (the outcome) indicates the level of knowledge and the prevailing uncertainties in the models. Chapter 2 presents the applied investigation data, which are

  7. Resource description and access 2013 revision

    CERN Document Server

    2013-01-01

    This e-book contains the 2013 Revision of RDA: Resource Description and Access, and includes the July 2013 Update. This e-book offers links within the RDA text and the capability of running rudimentary searches of RDA, but please note that this e-book does not have the full range of content or functionality provided by the subscription product RDA Toolkit. Included: A full accumulation of RDA- the revision contains a full set of all current RDA instructions. It replaces the previous version of RDA Print as opposed to being an update packet to that version. RDA has gone through many changes sin

  8. The Unified Extensional Versioning Model

    DEFF Research Database (Denmark)

    Asklund, U.; Bendix, Lars Gotfred; Christensen, H. B.

    1999-01-01

    Versioning of components in a system is a well-researched field where various adequate techniques have already been established. In this paper, we look at how versioning can be extended to cover also the structural aspects of a system. There exist two basic techniques for versioning - intentional...

  9. PVWatts Version 5 Manual

    Energy Technology Data Exchange (ETDEWEB)

    Dobos, A. P.

    2014-09-01

    The NREL PVWatts calculator is a web application developed by the National Renewable Energy Laboratory (NREL) that estimates the electricity production of a grid-connected photovoltaic system based on a few simple inputs. PVWatts combines a number of sub-models to predict overall system performance, and makes includes several built-in parameters that are hidden from the user. This technical reference describes the sub-models, documents assumptions and hidden parameters, and explains the sequence of calculations that yield the final system performance estimate. This reference is applicable to the significantly revised version of PVWatts released by NREL in 2014.

  10. Trace contaminant control simulation computer program, version 8.1

    Science.gov (United States)

    Perry, J. L.

    1994-01-01

    The Trace Contaminant Control Simulation computer program is a tool for assessing the performance of various process technologies for removing trace chemical contamination from a spacecraft cabin atmosphere. Included in the simulation are chemical and physical adsorption by activated charcoal, chemical adsorption by lithium hydroxide, absorption by humidity condensate, and low- and high-temperature catalytic oxidation. Means are provided for simulating regenerable as well as nonregenerable systems. The program provides an overall mass balance of chemical contaminants in a spacecraft cabin given specified generation rates. Removal rates are based on device flow rates specified by the user and calculated removal efficiencies based on cabin concentration and removal technology experimental data. Versions 1.0 through 8.0 are documented in NASA TM-108409. TM-108409 also contains a source file listing for version 8.0. Changes to version 8.0 are documented in this technical memorandum and a source file listing for the modified version, version 8.1, is provided. Detailed descriptions for the computer program subprograms are extracted from TM-108409 and modified as necessary to reflect version 8.1. Version 8.1 supersedes version 8.0. Information on a separate user's guide is available from the author.

  11. Japanese Evaluated Nuclear Data Library, version-3

    International Nuclear Information System (INIS)

    Shibata, Keiichi; Nakagawa, Tsuneo; Asami, Tetsuo

    1990-06-01

    The general purpose file of the third version of Japanese Evaluated Nuclear Data Library, JENDL-3, has been compiled by the JAERI Nuclear Data Center in cooperation with the Japanese Nuclear Data Committee. It contains neutron nuclear data for 171 nuclides which are needed for design of fission and fusion reactors and for shielding calculation. In the JENDL-3 evaluation, much effort was devoted to improve reliability of high-energy data for fusion application and to include gamma-ray production data. Theoretical calculations played an important role in achieving these purposes. A special method called simultaneous evaluation was adopted to determine important cross sections of fissile and fertile nuclides. This report presents a general description for the evaluation of light, medium-heavy and heavy nuclide data. Also given are the descriptive data for each nuclide contained in the File 1 part of JENDL-3. (author)

  12. URGENCES NOUVELLE VERSION

    CERN Multimedia

    Medical Service

    2002-01-01

    The table of emergency numbers that appeared in Bulletin 10/2002 is out of date. The updated version provided by the Medical Service appears on the following page. Please disregard the previous version. URGENT NEED OF A DOCTOR GENEVAPATIENT NOT FIT TO BE MOVED: Call your family doctor Or SOS MEDECINS (24H/24H) 748 49 50 Or ASSOC. OF GENEVA DOCTORS (7H-23H) 322 20 20 PATIENT CAN BE MOVED: HOPITAL CANTONAL 24 Micheli du Crest 372 33 11 382 33 11 CHILDREN'S HOSPITAL 6 rue Willy Donzé 382 68 18 382 45 55 MATERNITY 24 Micheli du Crest 382 68 16 382 33 11 OPHTALMOLOGY 22 Alcide Jentzer 382 84 00 HOPITAL DE LA TOUR Meyrin 719 61 11 CENTRE MEDICAL DE MEYRIN Champs Fréchets 719 74 00 URGENCES : FIRE BRIGADE 118 FIRE BRIGADE CERN 767 44 44 BESOIN URGENT D'AMBULANCE (GENEVE ET VAUD) : 144 POLICE 117 ANTI-POISON CENTRE 24H/24H 01 251 51 510 EUROPEAN EMERGENCY CALL: 112 FRANCE PATIENT NOT FIT TO BE MOVED: call your family doctor PATIENT CAN BE MOVED: ST. JULIE...

  13. Implementing a Description Grammar Interpreter : A Notation for Descriptions and Description Rules

    NARCIS (Netherlands)

    Stouffs, R.M.F.

    2015-01-01

    Description grammars represent a formalism for generating verbal descriptions of designs, used in conjunction with shape grammars. A description grammar constitutes a set of description rules that define a language of descriptions. A description grammar interpreter implements the mechanisms to

  14. Math Description Engine Software Development Kit

    Science.gov (United States)

    Shelton, Robert O.; Smith, Stephanie L.; Dexter, Dan E.; Hodgson, Terry R.

    2010-01-01

    The Math Description Engine Software Development Kit (MDE SDK) can be used by software developers to make computer-rendered graphs more accessible to blind and visually-impaired users. The MDE SDK generates alternative graph descriptions in two forms: textual descriptions and non-verbal sound renderings, or sonification. It also enables display of an animated trace of a graph sonification on a visual graph component, with color and line-thickness options for users having low vision or color-related impairments. A set of accessible graphical user interface widgets is provided for operation by end users and for control of accessible graph displays. Version 1.0 of the MDE SDK generates text descriptions for 2D graphs commonly seen in math and science curriculum (and practice). The mathematically rich text descriptions can also serve as a virtual math and science assistant for blind and sighted users, making graphs more accessible for everyone. The MDE SDK has a simple application programming interface (API) that makes it easy for programmers and Web-site developers to make graphs accessible with just a few lines of code. The source code is written in Java for cross-platform compatibility and to take advantage of Java s built-in support for building accessible software application interfaces. Compiled-library and NASA Open Source versions are available with API documentation and Programmer s Guide at http:/ / prim e.jsc.n asa. gov.

  15. Nuclear Criticality Safety Handbook, Version 2. English translation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-08-01

    The Nuclear Criticality Safety Handbook, Version 2 essentially includes the description of the Supplement Report to the Nuclear Criticality Safety Handbook, released in 1995, into the first version of the Nuclear Criticality Safety Handbook, published in 1988. The following two points are new: (1) exemplifying safety margins related to modeled dissolution and extraction processes, (2) describing evaluation methods and alarm system for criticality accidents. Revision has been made based on previous studies for the chapter that treats modeling the fuel system: e.g., the fuel grain size that the system can be regarded as homogeneous, non-uniformity effect of fuel solution, an burnup credit. This revision has solved the inconsistencies found in the first version between the evaluation of errors found in JACS code system and the criticality condition data that were calculated based on the evaluation. This report is an English translation of the Nuclear Criticality Safety Handbook, Version 2, originally published in Japanese as JAERI 1340 in 1999. (author)

  16. Itil version 3 at a glance information quick reference

    CERN Document Server

    Long, John

    2008-01-01

    ITILA(R) Version 3 At a Glance takes a graphical approach to consolidating the information of ITILA(R) version 3. ITILA(R) is an internationally-recognized set of best practices for providing IT service management. IT organizations worldwide are implementing ITILA(R) as a vehicle for improving IT service quality and improve return on investment for IT services. The desk referencea (TM)s unique graphical approach will take otherwise complex textual descriptions and make the information accessible in a series of consistent, simple diagrams. ITILA(R) Version 3 At a Glance will be of interest to organizations looking to train their staffs in a consistent and cost-effective way. Further, this book is ideal for anyone involved in planning consulting, implementing, or testing an ITILA(R) Version 3 implementation. Each chapter in ITILA(R) Version 3 at a Glance summarizes one of the ITILA(R) v3 books in the following consistent structure: - Brief Description of the Stage - Overview Diagram of the Stage - Key Concepts ...

  17. GNU Octave Manual Version 3

    DEFF Research Database (Denmark)

    W. Eaton, John; Bateman, David; Hauberg, Søren

    This manual is the definitive guide to GNU Octave, an interactive environment for numerical computation. The manual covers the new version 3 of GNU Octave.......This manual is the definitive guide to GNU Octave, an interactive environment for numerical computation. The manual covers the new version 3 of GNU Octave....

  18. APS beamline standard components handbook, Version 1. 3

    Energy Technology Data Exchange (ETDEWEB)

    Hahn, U.; Shu, D.; Kuzay, T.M.

    1993-02-01

    This Handbook in its current version (1.3) contains descriptions, specifications, and preliminary engineering design drawings for many of the standard components. The design status and schedules have been provided wherever possible. In the near future, the APS plans to update engineering drawings of identified standard beamline components and complete the Handbook. The completed version of this Handbook will become available to both the CATs and potential vendors. Use of standard components should result in major cost reductions for CATs in the areas of beamline design and construction.

  19. User's manual for three dimensional FDTD version C code for scattering from frequency-independent dielectric and magnetic materials

    Science.gov (United States)

    Beggs, John H.; Luebbers, Raymond J.; Kunz, Karl S.

    1992-01-01

    The Penn State Finite Difference Time Domain Electromagnetic Scattering Code Version C is a three-dimensional numerical electromagnetic scattering code based on the Finite Difference Time Domain (FDTD) technique. The supplied version of the code is one version of our current three-dimensional FDTD code set. The manual given here provides a description of the code and corresponding results for several scattering problems. The manual is organized into 14 sections: introduction, description of the FDTD method, operation, resource requirements, Version C code capabilities, a brief description of the default scattering geometry, a brief description of each subroutine, a description of the include file (COMMONC.FOR), a section briefly discussing radar cross section computations, a section discussing some scattering results, a new problem checklist, references, and figure titles.

  20. Site descriptive modelling - strategy for integrated evaluation

    International Nuclear Information System (INIS)

    Andersson, Johan

    2003-02-01

    The current document establishes the strategy to be used for achieving sufficient integration between disciplines in producing Site Descriptive Models during the Site Investigation stage. The Site Descriptive Model should be a multidisciplinary interpretation of geology, rock mechanics, thermal properties, hydrogeology, hydrogeochemistry, transport properties and ecosystems using site investigation data from deep bore holes and from the surface as input. The modelling comprise the following iterative steps, evaluation of primary data, descriptive and quantitative modelling (in 3D), overall confidence evaluation. Data are first evaluated within each discipline and then the evaluations are checked between the disciplines. Three-dimensional modelling (i.e. estimating the distribution of parameter values in space and its uncertainty) is made in a sequence, where the geometrical framework is taken from the geological model and in turn used by the rock mechanics, thermal and hydrogeological modelling etc. The three-dimensional description should present the parameters with their spatial variability over a relevant and specified scale, with the uncertainty included in this description. Different alternative descriptions may be required. After the individual discipline modelling and uncertainty assessment a phase of overall confidence evaluation follows. Relevant parts of the different modelling teams assess the suggested uncertainties and evaluate the feedback. These discussions should assess overall confidence by, checking that all relevant data are used, checking that information in past model versions is considered, checking that the different kinds of uncertainty are addressed, checking if suggested alternatives make sense and if there is potential for additional alternatives, and by discussing, if appropriate, how additional measurements (i.e. more data) would affect confidence. The findings as well as the modelling results are to be documented in a Site Description

  1. Description logics of context

    CSIR Research Space (South Africa)

    Klarman, S

    2013-05-01

    Full Text Available We introduce Description Logics of Context (DLCs) - an extension of Description Logics (DLs) for context-based reasoning. Our approach descends from J. McCarthy's tradition of treating contexts as formal objects over which one can quantify...

  2. Physics 3204. Course Description.

    Science.gov (United States)

    Newfoundland and Labrador Dept. of Education.

    A description of the physics 3204 course in Newfoundland and Labrador is provided. The description includes: (1) statement of purpose, including general objectives of science education; (2) a list of six course objectives; (3) course content for units on sound, light, optical instruments, electrostatics, current electricity, Michael Faraday and…

  3. Descriptive set theory

    CERN Document Server

    Moschovakis, YN

    1987-01-01

    Now available in paperback, this monograph is a self-contained exposition of the main results and methods of descriptive set theory. It develops all the necessary background material from logic and recursion theory, and treats both classical descriptive set theory and the effective theory developed by logicians.

  4. TOUGH2 User's Guide Version 2

    International Nuclear Information System (INIS)

    Pruess, K.; Oldenburg, C.M.; Moridis, G.J.

    1999-01-01

    TOUGH2 is a numerical simulator for nonisothermal flows of multicomponent, multiphase fluids in one, two, and three-dimensional porous and fractured media. The chief applications for which TOUGH2 is designed are in geothermal reservoir engineering, nuclear waste disposal, environmental assessment and remediation, and unsaturated and saturated zone hydrology. TOUGH2 was first released to the public in 1991; the 1991 code was updated in 1994 when a set of preconditioned conjugate gradient solvers was added to allow a more efficient solution of large problems. The current Version 2.0 features several new fluid property modules and offers enhanced process modeling capabilities, such as coupled reservoir-wellbore flow, precipitation and dissolution effects, and multiphase diffusion. Numerous improvements in previously released modules have been made and new user features have been added, such as enhanced linear equation solvers, and writing of graphics files. The T2VOC module for three-phase flows of water, air and a volatile organic chemical (VOC), and the T2DM module for hydrodynamic dispersion in 2-D flow systems have been integrated into the overall structure of the code and are included in the Version 2.0 package. Data inputs are upwardly compatible with the previous version. Coding changes were generally kept to a minimum, and were only made as needed to achieve the additional functionalities desired. TOUGH2 is written in standard FORTRAN77 and can be run on any platform, such as workstations, PCs, Macintosh, mainframe and supercomputers, for which appropriate FORTRAN compilers are available. This report is a self-contained guide to application of TOUGH2 to subsurface flow problems. It gives a technical description of the TOUGH2 code, including a discussion of the physical processes modeled, and the mathematical and numerical methods used. Illustrative sample problems are presented along with detailed instructions for preparing input data

  5. IDC System Specification Document Version 1.1.

    Energy Technology Data Exchange (ETDEWEB)

    Harris, James M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Lober, Randall R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-02-01

    This document contains the system specifications derived to satisfy the system requirements found in the IDC System Requirements Document for the IDC Reengineering Phase 2 project. Revisions Version Date Author/Team Revision Description Authorized by V1.0 12/2014 IDC Reengineering Project Team Initial delivery M. Harris V1.1 2/2015 IDC Reengineering Project Team Iteration I2 Review Comments M. Harris

  6. On Meanings and Descriptions

    Directory of Open Access Journals (Sweden)

    Mieke Bal

    1981-09-01

    Full Text Available Although descriptive passages would appear to be of marginal importance in narrative texts, they are, in fact, of both logical and semantic necessity. Narratology, therefore, must take these segments into account. In this article, I shall survey the present situation in this field and compare rival points of view. I shall also offer several suggestions for analyzing descriptions. The following topics will be discussed: the nature of description as a specific type of discourse which makes it recognizable as such; the internal structure of description; the place and function of descriptions in the text as a whole. In the latter section, the semantic impact of descriptions in the overall meaning of narrative texts will be accounted for. This article is intended as a contribution to the theory of description as a part of narratology. It also has a didactic purpose, since it proposes a model for the analysis of texts which can be used for systematic text-study, both in a historical and a comparative perspective.

  7. PAV ontology: provenance, authoring and versioning.

    Science.gov (United States)

    Ciccarese, Paolo; Soiland-Reyes, Stian; Belhajjame, Khalid; Gray, Alasdair Jg; Goble, Carole; Clark, Tim

    2013-11-22

    Provenance is a critical ingredient for establishing trust of published scientific content. This is true whether we are considering a data set, a computational workflow, a peer-reviewed publication or a simple scientific claim with supportive evidence. Existing vocabularies such as Dublin Core Terms (DC Terms) and the W3C Provenance Ontology (PROV-O) are domain-independent and general-purpose and they allow and encourage for extensions to cover more specific needs. In particular, to track authoring and versioning information of web resources, PROV-O provides a basic methodology but not any specific classes and properties for identifying or distinguishing between the various roles assumed by agents manipulating digital artifacts, such as author, contributor and curator. We present the Provenance, Authoring and Versioning ontology (PAV, namespace http://purl.org/pav/): a lightweight ontology for capturing "just enough" descriptions essential for tracking the provenance, authoring and versioning of web resources. We argue that such descriptions are essential for digital scientific content. PAV distinguishes between contributors, authors and curators of content and creators of representations in addition to the provenance of originating resources that have been accessed, transformed and consumed. We explore five projects (and communities) that have adopted PAV illustrating their usage through concrete examples. Moreover, we present mappings that show how PAV extends the W3C PROV-O ontology to support broader interoperability. The initial design of the PAV ontology was driven by requirements from the AlzSWAN project with further requirements incorporated later from other projects detailed in this paper. The authors strived to keep PAV lightweight and compact by including only those terms that have demonstrated to be pragmatically useful in existing applications, and by recommending terms from existing ontologies when plausible. We analyze and compare PAV with related

  8. A descriptive study of the morbidity pattern of older persons ...

    African Journals Online (AJOL)

    Data were analyzed using Stata version 13 (Texas, USA). Frequency distributions were used for descriptive analysis, and chi-square test was used to test associations. Results: More than a half, 2919 (59.7%), of the respondents were females and almost three quarters 3501 (71.7%) were aged between 60 and 74 years.

  9. A Chinese Translation of the Self Description Questionnaire.

    Science.gov (United States)

    Yeung, Alexander Seeshing; Lee, Frances Laimui

    This study examined the factor structure of a Chinese version of the Verbal, Math, Academic, and General self-concept scales of the Self Description Questionnaire (SDQII) administered to high school students in China at two time points. Responses of 487 students were used. Item scale correlations and reliability coefficients were good.…

  10. Rock Visualization System. Technical description (RVS v.3.5)

    Energy Technology Data Exchange (ETDEWEB)

    Curtis, P.; Elfstroem, M.; Markstroem, I. [FB Engineering, Goeteborg (Sweden)

    2004-03-01

    The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. It is a description of RVS version 3.5. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples; Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carryout a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system.

  11. SPORTS (version 1) user's guide

    International Nuclear Information System (INIS)

    Chatoorgoon, V.; Thibeault, P.R.

    1985-06-01

    SPORTS is a transient one-dimensional thermalhydraulic code formulated from the non-linear time dependent conservation equations and designed to investigate two-phase flow stability. The SPORTS Users' Guide contains some features of the code, a brief description of the program environment and access, and a description of the input data complete with a sample problem

  12. GENII Version 2 Software Design Document

    Energy Technology Data Exchange (ETDEWEB)

    Napier, Bruce A.; Strenge, Dennis L.; Ramsdell, James V.; Eslinger, Paul W.; Fosmire, Christian J.

    2004-03-08

    This document describes the architectural design for the GENII-V2 software package. This document defines details of the overall structure of the software, the major software components, their data file interfaces, and specific mathematical models to be used. The design represents a translation of the requirements into a description of the software structure, software components, interfaces, and necessary data. The design focuses on the major components and data communication links that are key to the implementation of the software within the operating framework. The purpose of the GENII-V2 software package is to provide the capability to perform dose and risk assessments of environmental releases of radionuclides. The software also has the capability of calculating environmental accumulation and radiation doses from surface water, groundwater, and soil (buried waste) media when an input concentration of radionuclide in these media is provided. This report represents a detailed description of the capabilities of the software product with exact specifications of mathematical models that form the basis for the software implementation and testing efforts. This report also presents a detailed description of the overall structure of the software package, details of main components (implemented in the current phase of work), details of data communication files, and content of basic output reports. The GENII system includes the capabilities for calculating radiation doses following chronic and acute releases. Radionuclide transport via air, water, or biological activity may be considered. Air transport options include both puff and plume models, each allow use of an effective stack height or calculation of plume rise from buoyant or momentum effects (or both). Building wake effects can be included in acute atmospheric release scenarios. The code provides risk estimates for health effects to individuals or populations; these can be obtained using the code by applying

  13. Museum audio description

    OpenAIRE

    Martins, Cláudia Susana Nunes

    2011-01-01

    Audio description for the blind and visually impaired has been around since people have described what is seen. Throughout time, it has evolved and developed within different media, starting with reality and daily life, moving into the cinema and television, then across other performing arts, museums and art galleries, and public places. Thus, academics and entertainment providers have developed a growing interest for audio description, especially in what concerns the best methods and strateg...

  14. GENII Version 2 Users’ Guide

    Energy Technology Data Exchange (ETDEWEB)

    Napier, Bruce A.

    2004-03-08

    The GENII Version 2 computer code was developed for the Environmental Protection Agency (EPA) at Pacific Northwest National Laboratory (PNNL) to incorporate the internal dosimetry models recommended by the International Commission on Radiological Protection (ICRP) and the radiological risk estimating procedures of Federal Guidance Report 13 into updated versions of existing environmental pathway analysis models. The resulting environmental dosimetry computer codes are compiled in the GENII Environmental Dosimetry System. The GENII system was developed to provide a state-of-the-art, technically peer-reviewed, documented set of programs for calculating radiation dose and risk from radionuclides released to the environment. The codes were designed with the flexibility to accommodate input parameters for a wide variety of generic sites. Operation of a new version of the codes, GENII Version 2, is described in this report. Two versions of the GENII Version 2 code system are available, a full-featured version and a version specifically designed for demonstrating compliance with the dose limits specified in 40 CFR 61.93(a), the National Emission Standards for Hazardous Air Pollutants (NESHAPS) for radionuclides. The only differences lie in the limitation of the capabilities of the user to change specific parameters in the NESHAPS version. This report describes the data entry, accomplished via interactive, menu-driven user interfaces. Default exposure and consumption parameters are provided for both the average (population) and maximum individual; however, these may be modified by the user. Source term information may be entered as radionuclide release quantities for transport scenarios, or as basic radionuclide concentrations in environmental media (air, water, soil). For input of basic or derived concentrations, decay of parent radionuclides and ingrowth of radioactive decay products prior to the start of the exposure scenario may be considered. A single code run can

  15. ELIPGRID-PC: Upgraded version

    International Nuclear Information System (INIS)

    Davidson, J.R.

    1995-12-01

    Evaluating the need for and the effectiveness of remedial cleanup at waste sites often includes finding average contaminant concentrations and identifying pockets of contamination called hot spots. The standard tool for calculating the probability of detecting pockets of contamination called hot spots has been the ELIPGRID code of singer and Wickman. The ELIPGRID-PC program has recently made this algorithm available for an IBM reg-sign personal computer (PC) or compatible. A new version of ELIPGRID-PC, incorporating Monte Carlo test results and simple graphics, is herein described. Various examples of how to use the program for both single and multiple hot spot cases are given. The code for an American National Standards Institute C version of the ELIPGRID algorithm is provided, and limitations and further work are noted. This version of ELIPGRID-PC reliably meets the goal of moving Singer's ELIPGRID algorithm to the PC

  16. Status and Plans for Finalization of SRT's Contribution to AIRS Version-7 and Version-7 AO

    Science.gov (United States)

    Susskind, Joel; Blaisdell, John; Iredell, Lena; Kouvaris, Louis C.

    2017-01-01

    Version-6.46 temperature profiles, water vapor profiles, and especially total O3, are very much compared to Version-6. With minor tweaking, Version-6.46 is a good candidate for use in Version-7. JPL Version-6.4.6 and Version-6.4.6 AO monthly mean products agree extremely well with each other. Version-6.4.6 AO is accurate enough that there is not necessarily a need to process both Version-7 and Version-7 AO data sets. Single day comparisons show Version-6.46 CrIS/ATMS and Version-6.46 AIRS/AMSU products agree extremely well with each other. We need to demonstrate agreement of Version-6.46 CrIS/ATMS and Version-6.46 AO products on a monthly mean basis for different months and years. CrIS/ATMS and AIRS/AMSU monthly mean comparisons showed excellent agreement using a previous version.

  17. From Description to prescription

    DEFF Research Database (Denmark)

    Müller, Anders Riel; Doucette, Jamie

    the Weberian foundations on which much developmental state theory is based, the policy version of the developmental state promoted by the KSP and cognate initiatives risks conflating Korea’s developmental expertise to a value-based mentalité that obscures social-spatial processes of authoritarian social...... produced and applied in problematic and decontextualized fashion that raises questions about just how ‘alternative’ Korea’s developmental expertise might be compared to other, market-oriented forms of development....

  18. Helicopter Maritime Environment Trainer: Operational Software CSCI Version Description Document (Simulateur D’Entrainement Virtuel pour Helicoptere Maritime: Logiciel Operationnel CSCI, Document de Description de la Version)

    Science.gov (United States)

    2011-06-01

    d’envol d’une frégate canadienne de patrouille dans un environnement virtuel. Le système HelMET a été installé à la 12e Escadre, Base des Forces...d’une frégate canadienne de patrouille dans un environnement virtuel. Le système HelMET a été installé à la 12e Escadre, Base des Forces canadiennes...afin d’entraîner les pilotes d’hélicoptère à l’atterrissage sur le pont d’envol d’une frégate canadienne de patrouille dans un environnement virtuel

  19. Generalizing: The descriptive struggle

    Directory of Open Access Journals (Sweden)

    Barney G. Glaser, Ph.D.; Hon Ph.D.

    2006-11-01

    Full Text Available The literature is not kind to the use of descriptive generalizations. Authors struggle and struggle to find and rationalize a way to use them and then fail in spite of trying a myriad of work-arounds. And then we have Lincoln and Guba’s famous statement: “The only generalization is: there is no generalization” in referring to qualitative research. (op cit, p. 110 They are referring to routine QDA yielding extensive descriptions, but which tacitly include conceptual generalizations without any real thought of knowledge about them. In this chapter I wish to explore this struggle for the purpose of explaining that the various contra arguments to using descriptive generalizations DO NOT apply to the ease of using conceptual generalizations yielded in SGT and especially FGT. I will not argue for the use of descriptive generalization. I agree with Lincoln and Guba with respect to QDA, “the only generalization is: there is no generalization.” It is up to the QDA methodologists, of whom there are many; to continue the struggle and I wish them well.

  20. Tore Supra: technical description

    International Nuclear Information System (INIS)

    1985-08-01

    This report is aimed, after a brief recall of physics and technologic perspectives of Tore Supra, at giving a detailed description of the basic machine; details of each component are defined. Volume 1 is specifically concerned with the general aspects of Tore Supra and the toroidal field system [fr

  1. Systematic Description of Sensors

    NARCIS (Netherlands)

    Regtien, Paulus P.L.; Sydenham, Peter H.; Thorn, Richard

    A sensor performs the exchange of information (thus energy) from one domain to another and therefore it operates on the interface between different physical domains. Several frameworks have been developed for a systematic description of sensors. Basically, they are based on either of two different

  2. Fractal description of fractures

    International Nuclear Information System (INIS)

    Lung, C.W.

    1991-06-01

    Recent studies on the fractal description of fractures are reviewed. Some problems on this subject are discussed. It seems hopeful to use the fractal dimension as a parameter for quantitative fractography and to apply fractal structures to the development of high toughness materials. (author). 28 refs, 7 figs

  3. MCFire model technical description

    Science.gov (United States)

    David R. Conklin; James M. Lenihan; Dominique Bachelet; Ronald P. Neilson; John B. Kim

    2016-01-01

    MCFire is a computer program that simulates the occurrence and effects of wildfire on natural vegetation, as a submodel within the MC1 dynamic global vegetation model. This report is a technical description of the algorithms and parameter values used in MCFire, intended to encapsulate its design and features a higher level that is more conceptual than the level...

  4. Dry Cleaning, Course Description.

    Science.gov (United States)

    Briscoe, Albert J.; Anderson, Floyd L.

    This course description was developed by educators for use at the Work Opportunity Center which was established to teach high school dropouts and/or hard-core unemployed youth. The ultimate objectives of this course are to prepare students for employment in dry cleaning occupations and to assist them in completing their high school graduation…

  5. Business Education, Course Description.

    Science.gov (United States)

    O'Neill, Robert; Anderson, Floyd L.

    This course description was developed by educators for use at the Work Opportunity Center in teaching high school dropouts and hard-core unemployed youth. The ultimate objectives of the business education curriculum at the Center are to prepare students for employment in clerical occupations and to assist them in completing their high school…

  6. Communications, Course Description.

    Science.gov (United States)

    Vickstrom, Sandra E.; Anderson, Floyd L.

    This course description was developed by educators for use at the Work Opportunity Center which was established to teach high school dropouts and/or hardcore unemployed youth. The ultimate objectives of this curriculum are to develop communicative skills necessary for social interaction and to help the student complete high school graduation…

  7. Reading, Course Description.

    Science.gov (United States)

    Decker, George; Anderson, Floyd L.

    This course description was developed by educators for use at the Work Opportunity Center which was established to teach high school dropouts and hard-core unemployed youth. The objectives of this reading curriculum are to develop skills of retarded readers, further develop skills of adequate readers, and develop an appreciation for reading.…

  8. Updating action domain descriptions.

    Science.gov (United States)

    Eiter, Thomas; Erdem, Esra; Fink, Michael; Senko, Ján

    2010-10-01

    Incorporating new information into a knowledge base is an important problem which has been widely investigated. In this paper, we study this problem in a formal framework for reasoning about actions and change. In this framework, action domains are described in an action language whose semantics is based on the notion of causality. Unlike the formalisms considered in the related work, this language allows straightforward representation of non-deterministic effects and indirect effects of (possibly concurrent) actions, as well as state constraints; therefore, the updates can be more general than elementary statements. The expressivity of this formalism allows us to study the update of an action domain description with a more general approach compared to related work. First of all, we consider the update of an action description with respect to further criteria, for instance, by ensuring that the updated description entails some observations, assertions, or general domain properties that constitute further constraints that are not expressible in an action description in general. Moreover, our framework allows us to discriminate amongst alternative updates of action domain descriptions and to single out a most preferable one, based on a given preference relation possibly dependent on the specified criteria. We study semantic and computational aspects of the update problem, and establish basic properties of updates as well as a decomposition theorem that gives rise to a divide and conquer approach to updating action descriptions under certain conditions. Furthermore, we study the computational complexity of decision problems around computing solutions, both for the generic setting and for two particular preference relations, viz. set-inclusion and weight-based preference. While deciding the existence of solutions and recognizing solutions are PSPACE-complete problems in general, the problems fall back into the polynomial hierarchy under restrictions on the additional

  9. Using the Hemophilia Joint Health Score for assessment of children: Reliability of the Spanish version.

    Science.gov (United States)

    R, Cuesta-Barriuso; A, Torres-Ortuño; S, Pérez-Alenda; J, Carrasco Juan; F, Querol; J, Nieto-Munuera; Ja, López-Pina

    2018-02-27

    Numerous measuring instruments for the evaluation of hemophilic arthropathy have been developed. One of the most used systems is the Hemophilia Joint Health Score (HJHS) given its sensitivity to clinical changes appearing in the joints because of recurrent hemarthrosis. Assessing the interrater reliability, using the Spanish version of the HJHS (version 2.1) in children with hemophilia. Reliability study to assess the interrater reliability of the Spanish version of HJHS. A sample of 36 children aged 7-13 years diagnosed with hemophilia A or B was used. Two physiotherapists performed physical assessments with the Spanish version of the HJHS. Descriptive statistics (range, mean, standard deviation) and the analysis of interrater reliability were calculated. The interrater reliability was heterogeneous since the Kappa coefficient range (ĸ), although significant (p reliability of the Spanish population version of the HJHS is high. This scale should be used generically in evaluating musculoskeletal pediatric patients with hemophilia.

  10. NCDC International Best Track Archive for Climate Stewardship (IBTrACS) Project, Version 2 (Version Superseded)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Version 2 of the dataset has been superseded by a newer version. Users should not use version 2 except in rare cases (e.g., when reproducing previous studies that...

  11. NCDC International Best Track Archive for Climate Stewardship (IBTrACS) Project, Version 1 (Version Superseded)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Version 1 of the dataset has been superseded by a newer version. Users should not use version 1 except in rare cases (e.g., when reproducing previous studies that...

  12. Multidimensional nonlinear descriptive analysis

    CERN Document Server

    Nishisato, Shizuhiko

    2006-01-01

    Quantification of categorical, or non-numerical, data is a problem that scientists face across a wide range of disciplines. Exploring data analysis in various areas of research, such as the social sciences and biology, Multidimensional Nonlinear Descriptive Analysis presents methods for analyzing categorical data that are not necessarily sampled randomly from a normal population and often involve nonlinear relations. This reference not only provides an overview of multidimensional nonlinear descriptive analysis (MUNDA) of discrete data, it also offers new results in a variety of fields. The first part of the book covers conceptual and technical preliminaries needed to understand the data analysis in subsequent chapters. The next two parts contain applications of MUNDA to diverse data types, with each chapter devoted to one type of categorical data, a brief historical comment, and basic skills peculiar to the data types. The final part examines several problems and then concludes with suggestions for futu...

  13. Descriptive sensory evaluations

    DEFF Research Database (Denmark)

    Dehlholm, Christian

    in projective mapping frame geometry and restrictions on the reported semantics. Two rapid descriptive evaluation techniques were proposed to represent a consensus evaluation. One of the approaches, ‘consensus attribute rating’ (CAR), allows a group of assessors to rate products on a list of pre......-selected attributes. The other approach, ‘consensus Napping’, allows a group of assessors to project products according to an agreed consensus placement on a paper sheet. Evaluations were performed either by groups of experienced sensory assessors or by product experts. Compared with conventional profiling techniques......, the evaluations showed significant correlations between some product configurations, but no consistent and systematic similarities. On average, product expert groups had less in common with the reference profiles than the trained panellist groups and the semantic descriptions of products varied to a large degree...

  14. Descriptive sensory evaluations

    DEFF Research Database (Denmark)

    Dehlholm, Christian

    A recent trend in descriptive sensory evaluation methodology has been the application of rapid evaluation techniques. The ease in use makes the techniques extremely easy to implement by industry and university environments. Thus, one might not consider validity in the choice of method. The overall...... in projective mapping frame geometry and restrictions on the reported semantics. Two rapid descriptive evaluation techniques were proposed to represent a consensus evaluation. One of the approaches, ‘consensus attribute rating’ (CAR), allows a group of assessors to rate products on a list of pre...... for all groups. Hence, consensus profiling with untrained assessors should not be used for the purpose of considering consistency between panels, while assessors trained in the product may perform more reliably. As for projective mapping variations of frame geometry, evaluations in a rectangular...

  15. FORM version 4.0

    Science.gov (United States)

    Kuipers, J.; Ueda, T.; Vermaseren, J. A. M.; Vollinga, J.

    2013-05-01

    We present version 4.0 of the symbolic manipulation system FORM. The most important new features are manipulation of rational polynomials and the factorization of expressions. Many other new functions and commands are also added; some of them are very general, while others are designed for building specific high level packages, such as one for Gröbner bases. New is also the checkpoint facility, that allows for periodic backups during long calculations. Finally, FORM 4.0 has become available as open source under the GNU General Public License version 3. Program summaryProgram title: FORM. Catalogue identifier: AEOT_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEOT_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU General Public License, version 3 No. of lines in distributed program, including test data, etc.: 151599 No. of bytes in distributed program, including test data, etc.: 1 078 748 Distribution format: tar.gz Programming language: The FORM language. FORM itself is programmed in a mixture of C and C++. Computer: All. Operating system: UNIX, LINUX, Mac OS, Windows. Classification: 5. Nature of problem: FORM defines a symbolic manipulation language in which the emphasis lies on fast processing of very large formulas. It has been used successfully for many calculations in Quantum Field Theory and mathematics. In speed and size of formulas that can be handled it outperforms other systems typically by an order of magnitude. Special in this version: The version 4.0 contains many new features. Most important are factorization and rational arithmetic. The program has also become open source under the GPL. The code in CPC is for reference. You are encouraged to upload the most recent sources from www.nikhef.nl/form/formcvs.php because of frequent bug fixes. Solution method: See "Nature of Problem", above. Additional comments: NOTE: The code in CPC is for reference. You are encouraged

  16. Resource Description Framework (RDF)

    OpenAIRE

    Gibbins, Nicholas; Shadbolt, Nigel

    2009-01-01

    The Resource Description Framework (RDF) is the standard knowledge representation language for the Semantic Web, an evolution of the World Wide Web that aims to provide a well-founded infrastructure for publishing, sharing and querying structured data. This article provides an introduction to RDF and its related vocabulary definition language RDF Schema, and explains its relationship with the OWL Web Ontology Language. Finally, it provides an overview of the historical development of RDF and ...

  17. XML Diagnostics Description Standard

    International Nuclear Information System (INIS)

    Neto, A.; Fernandes, H.; Varandas, C.; Lister, J.; Yonekawa, I.

    2006-01-01

    A standard for the self-description of fusion plasma diagnostics will be presented, based on the Extensible Markup Language (XML). The motivation is to maintain and organise the information on all the components of a laboratory experiment, from the hardware to the access security, to save time and money when problems arises. Since there is no existing standard to organise this kind of information, every Association stores and organises each experiment in different ways. This can lead to severe problems when the organisation schema is poorly documented or written in national languages. The exchange of scientists, researchers and engineers between laboratories is a common practice nowadays. Sometimes they have to install new diagnostics or to update existing ones and frequently they lose a great deal of time trying to understand the currently installed system. The most common problems are: no documentation available; the person who understands it has left; documentation written in the national language. Standardisation is the key to solving all the problems mentioned. From the commercial information on the diagnostic (component supplier; component price) to the hardware description (component specifications; drawings) to the operation of the equipment (finite state machines) through change control (who changed what and when) and internationalisation (information at least in the native language and in English), a common XML schema will be proposed. This paper will also discuss an extension of these ideas to the self-description of ITER plant systems, since the problems will be identical. (author)

  18. A constructive version of AIP revisited

    NARCIS (Netherlands)

    Barros, A.; Hou, T.

    2008-01-01

    In this paper, we review a constructive version of the Approximation Induction Principle. This version states that bisimilarity of regular processes can be decided by observing only a part of their behaviour. We use this constructive version to formulate a complete inference system for the Algebra

  19. GAROS input deck description

    Energy Technology Data Exchange (ETDEWEB)

    Vollan, A.; Soederberg, M. (Aeronautical Research Inst. of Sweden, Bromma (Sweden))

    1989-01-01

    This report describes the input for the programs GAROS1 and GAROS2, version 5.8 and later, February 1988. The GAROS system, developed by Arne Vollan, Omega GmbH, is used for the analysis of the mechanical and aeroelastic properties for general rotating systems. It has been specially designed to meet the requirements of aeroelastic stability and dynamic response of horizontal axis wind energy converters. Some of the special characteristics are: * The rotor may have one or more blades. * The blades may be rigidly attached to the hub, or they may be fully articulated. * The full elastic properties of the blades, the hub, the machine house and the tower are taken into account. * With the same basic model, a number of different analyses can be performed: Snap-shot analysis, Floquet method, transient response analysis, frequency response analysis etc.

  20. Embrittlement data base, version 1

    Energy Technology Data Exchange (ETDEWEB)

    Wang, J.A.

    1997-08-01

    The aging and degradation of light-water-reactor (LWR) pressure vessels is of particular concern because of their relevance to plant integrity and the magnitude of the expected irradiation embrittlement. The radiation embrittlement of reactor pressure vessel (RPV) materials depends on many different factors such as flux, fluence, fluence spectrum, irradiation temperature, and preirradiation material history and chemical compositions. These factors must be considered to reliably predict pressure vessel embrittlement and to ensure the safe operation of the reactor. Based on embrittlement predictions, decisions must be made concerning operating parameters and issues such as low-leakage-fuel management, possible life extension, and the need for annealing the pressure vessel. Large amounts of data from surveillance capsules and test reactor experiments, comprising many different materials and different irradiation conditions, are needed to develop generally applicable damage prediction models that can be used for industry standards and regulatory guides. Version 1 of the Embrittlement Data Base (EDB) is such a comprehensive collection of data resulting from merging version 2 of the Power Reactor Embrittlement Data Base (PR-EDB). Fracture toughness data were also integrated into Version 1 of the EDB. For power reactor data, the current EDB lists the 1,029 Charpy transition-temperature shift data points, which include 321 from plates, 125 from forgoings, 115 from correlation monitor materials, 246 from welds, and 222 from heat-affected-zone (HAZ) materials that were irradiated in 271 capsules from 101 commercial power reactors. For test reactor data, information is available for 1,308 different irradiated sets (352 from plates, 186 from forgoings, 303 from correlation monitor materials, 396 from welds and 71 from HAZs) and 268 different irradiated plus annealed data sets.

  1. Embrittlement data base, version 1

    International Nuclear Information System (INIS)

    Wang, J.A.

    1997-08-01

    The aging and degradation of light-water-reactor (LWR) pressure vessels is of particular concern because of their relevance to plant integrity and the magnitude of the expected irradiation embrittlement. The radiation embrittlement of reactor pressure vessel (RPV) materials depends on many different factors such as flux, fluence, fluence spectrum, irradiation temperature, and preirradiation material history and chemical compositions. These factors must be considered to reliably predict pressure vessel embrittlement and to ensure the safe operation of the reactor. Based on embrittlement predictions, decisions must be made concerning operating parameters and issues such as low-leakage-fuel management, possible life extension, and the need for annealing the pressure vessel. Large amounts of data from surveillance capsules and test reactor experiments, comprising many different materials and different irradiation conditions, are needed to develop generally applicable damage prediction models that can be used for industry standards and regulatory guides. Version 1 of the Embrittlement Data Base (EDB) is such a comprehensive collection of data resulting from merging version 2 of the Power Reactor Embrittlement Data Base (PR-EDB). Fracture toughness data were also integrated into Version 1 of the EDB. For power reactor data, the current EDB lists the 1,029 Charpy transition-temperature shift data points, which include 321 from plates, 125 from forgoings, 115 from correlation monitor materials, 246 from welds, and 222 from heat-affected-zone (HAZ) materials that were irradiated in 271 capsules from 101 commercial power reactors. For test reactor data, information is available for 1,308 different irradiated sets (352 from plates, 186 from forgoings, 303 from correlation monitor materials, 396 from welds and 71 from HAZs) and 268 different irradiated plus annealed data sets

  2. MCO Monitoring activity description

    International Nuclear Information System (INIS)

    SEXTON, R.A.

    1998-01-01

    Spent Nuclear Fuel remaining from Hanford's N-Reactor operations in the 1970s has been stored under water in the K-Reactor Basins. This fuel will be repackaged, dried and stored in a new facility in the 200E Area. The safety basis for this process of retrieval, drying, and interim storage of the spent fuel has been established. The monitoring of MCOS in dry storage is a currently identified issue in the SNF Project. This plan outlines the key elements of the proposed monitoring activity. Other fuel stored in the K-Reactor Basins, including SPR fuel, will have other monitoring considerations and is not addressed by this activity description

  3. Description logic rules

    CERN Document Server

    Krötzsch, M

    2010-01-01

    Ontological modelling today is applied in many areas of science and technology,including the Semantic Web. The W3C standard OWL defines one of the most important ontology languages based on the semantics of description logics. An alternative is to use rule languages in knowledge modelling, as proposed in the W3C's RIF standard. So far, it has often been unclear how to combine both technologies without sacrificing essential computational properties. This book explains this problem and presents new solutions that have recently been proposed. Extensive introductory chapters provide the necessary

  4. Assessing Preschool Children's Pretend Play: Preliminary Validation of the Affect in Play Scale-Preschool Version

    Science.gov (United States)

    Kaugars, Astrida Seja; Russ, Sandra W.

    2009-01-01

    Research Findings: A description of the development and preliminary validation of the Affect in Play Scale-Preschool version (APS-P) is presented by demonstrating associations among preschool children's play, creativity, and daily behavior using multiple methodologies. Thirty-three preschool-age children completed a standardized 5-minute play task…

  5. The Validity of a German Version of the Career Exploration Survey

    Science.gov (United States)

    Rowold, Jens; Staufenbiel, Kathrin

    2010-01-01

    This paper reports psychometric properties of a German version of the Career Exploration Survey (CES-G). The instrument's 16 scales allow for a detailed description of career exploration. Based on data from two studies (N[subscript 1] = 1023; N[subscript 2] = 816), confirmatory factor analyses supported the 16-factor model. With regard to…

  6. Procedures and Standards Handbook. Version 3.0. What Works Clearinghouse

    Science.gov (United States)

    What Works Clearinghouse, 2014

    2014-01-01

    This "What Works Clearinghouse Procedures and Standards Handbook (Version 3.0)" provides a detailed description of the standards and procedures of the What Works Clearinghouse (WWC). The remaining chapters of this Handbook are organized to take the reader through the basic steps that the WWC uses to develop a review protocol, identify…

  7. School version of ESTE EU

    International Nuclear Information System (INIS)

    Carny, P.; Suchon, D.; Chyly, M.; Smejkalova, E.; Fabova, V.

    2008-01-01

    ESTE EU is information system and software for radiological impacts assessment to the territory of the country in case of radiation accident inside/outside of the country .The program enables to model dispersion of radioactive clouds in small-scale and meso-scale. The system enables the user to estimate prediction of the source term (release to the atmosphere ) for any point of radiation/nuclear accident in Europe (for any point of the release, but especially for the sites of European power reactors ). The system enables to utilize results of real radiological monitoring in the process of source term estimation. Radiological impacts of release to the atmosphere are modelled and calculated across the Europe and displayed in the geographical information system (GIS). The school version of ESTE EU is intended for students of the universities which are interested in or could work in the field of emergency response, radiological and nuclear accidents, dispersion modelling, radiological impacts calculation and urgent or preventive protective measures implementation. The school version of ESTE EU is planned to be donated to specialized departments of faculties in Slovakia, Czech Republic, etc. System can be fully operated in Slovak, Czech or English language. (authors)

  8. School version of ESTE EU

    International Nuclear Information System (INIS)

    Carny, P.; Suchon, D.; Chyly, M.; Smejkalova, E.; Fabova, V.

    2009-01-01

    ESTE EU is information system and software for radiological impacts assessment to the territory of the country in case of radiation accident inside/outside of the country .The program enables to model dispersion of radioactive clouds in small-scale and meso-scale. The system enables the user to estimate prediction of the source term (release to the atmosphere ) for any point of radiation/nuclear accident in Europe (for any point of the release, but especially for the sites of European power reactors ). The system enables to utilize results of real radiological monitoring in the process of source term estimation. Radiological impacts of release to the atmosphere are modelled and calculated across the Europe and displayed in the geographical information system (GIS). The school version of ESTE EU is intended for students of the universities which are interested in or could work in the field of emergency response, radiological and nuclear accidents, dispersion modelling, radiological impacts calculation and urgent or preventive protective measures implementation. The school version of ESTE EU is planned to be donated to specialized departments of faculties in Slovakia, Czech Republic, etc. System can be fully operated in Slovak, Czech or English language. (authors)

  9. Multiple Descriptions Using Sparse Decompositions

    DEFF Research Database (Denmark)

    Jensen, Tobias Lindstrøm; Østergaard, Jan; Dahl, Joachim

    2010-01-01

    In this paper, we consider the design of multiple descriptions (MDs) using sparse decompositions. In a description erasure channel only a subset of the transmitted descriptions is received. The MD problem concerns the design of the descriptions such that they individually approximate the source...... first-order method to the proposed convex problem such that we can solve large-scale instances for image sequences....

  10. User's manual for three dimensional FDTD version D code for scattering from frequency-dependent dielectric and magnetic materials

    Science.gov (United States)

    Beggs, John H.; Luebbers, Raymond J.; Kunz, Karl S.

    1992-01-01

    The Penn State Finite Difference Time Domain Electromagnetic Scattering Code version D is a 3-D numerical electromagnetic scattering code based upon the finite difference time domain technique (FDTD). The manual provides a description of the code and corresponding results for several scattering problems. The manual is organized into 14 sections: introduction; description of the FDTD method; operation; resource requirements; version D code capabilities; a brief description of the default scattering geometry; a brief description of each subroutine; a description of the include file; a section briefly discussing Radar Cross Section computations; a section discussing some scattering results; a sample problem setup section; a new problem checklist; references and figure titles. The FDTD technique models transient electromagnetic scattering and interactions with objects of arbitrary shape and/or material composition. In the FDTD method, Maxwell's curl equations are discretized in time-space and all derivatives (temporal and spatial) are approximated by central differences.

  11. Evalutive Descriptions of Art

    Directory of Open Access Journals (Sweden)

    Nataša Lah

    2016-01-01

    Full Text Available Taking into account the fact that, throughout history, certain artworks have been considered as “worth of watching” (according to the Greek etymon ἀξιοϑέατος / aksioteatos, preservation, or theorizing, while others were not, one is led to investigate the various types of evaluative descriptions. Those artworks that are more valuable than others, or simply valuable in themselves on the basis of rather specific features, have always represented the paradigmatic model for the evaluator, thus revealing the identitary nature of value as different from one epoch to another. Our aim has been to discern, with regard to this starting point, the way in which the process of evaluating artworks fits the general matrix of the universal theory of value, with its clearly distinguished levels of evaluation, beginning with value descriptions, continuing through the features of evaluation or abstract qualities of values extracted from these descriptions, and ending with value norms or systems of accepted generalizations in evaluation. Value standpoints in such an evaluation matrix represent dispositions or preferences in procedures, which reflect the norms or signifying concepts of the time. Corresponding procedures, or applications of the hierarchicized signification of artworks, are manifested in all known forms of artwork assessment: attribution, institutionalization, and setting of priorities in terms of exhibition, conservation, acquisition, restoration, and so on. Research in the history of European art-historical ideas has corroborated the hypothesis that, prior to the late 18th century, clear normative patterns were applied when it came to the evaluation of artworks. However, with the emergence of early Romanticism, this could no longer be done in the traditional way. Before the period in question, visual art was created (regardless of some stylistic discrepancies between individual authors and classified according to well-defined thematic

  12. Polemic and Descriptive Negations

    DEFF Research Database (Denmark)

    Horslund, Camilla Søballe

    2011-01-01

    as such may be more or less central to the meaning of the utterance. The present paper investigates the role of morphosyntactic and prosodic prominence as well as register and social setting on the interpretation of negations. It seems plausible to expect that if the negation as such is central to the meaning...... of the utterance (as in polemic negations), the negation will be articulated prominently in order to emphasise this importance. Likewise, if the negation is not central to the meaning of the utterance, it should not be articulated prominently. Moreover, it is plausible to expect descriptive negations to be more...... common in certain social context or genres, while polemic negations are more likely to come up in other genres and social settings. Previous studies have shown a relation between articulatory prominence and register, which may further inform the analysis. Hence, the paper investigates how articulatory...

  13. Task Description Language

    Science.gov (United States)

    Simmons, Reid; Apfelbaum, David

    2005-01-01

    Task Description Language (TDL) is an extension of the C++ programming language that enables programmers to quickly and easily write complex, concurrent computer programs for controlling real-time autonomous systems, including robots and spacecraft. TDL is based on earlier work (circa 1984 through 1989) on the Task Control Architecture (TCA). TDL provides syntactic support for hierarchical task-level control functions, including task decomposition, synchronization, execution monitoring, and exception handling. A Java-language-based compiler transforms TDL programs into pure C++ code that includes calls to a platform-independent task-control-management (TCM) library. TDL has been used to control and coordinate multiple heterogeneous robots in projects sponsored by NASA and the Defense Advanced Research Projects Agency (DARPA). It has also been used in Brazil to control an autonomous airship and in Canada to control a robotic manipulator.

  14. GARFEM input deck description

    Energy Technology Data Exchange (ETDEWEB)

    Zdunek, A.; Soederberg, M. (Aeronautical Research Inst. of Sweden, Bromma (Sweden))

    1989-01-01

    The input card deck for the finite element program GARFEM version 3.2 is described in this manual. The program includes, but is not limited to, capabilities to handle the following problems: * Linear bar and beam element structures, * Geometrically non-linear problems (bar and beam), both static and transient dynamic analysis, * Transient response dynamics from a catalog of time varying external forcing function types or input function tables, * Eigenvalue solution (modes and frequencies), * Multi point constraints (MPC) for the modelling of mechanisms and e.g. rigid links. The MPC definition is used only in the geometrically linearized sense, * Beams with disjunct shear axis and neutral axis, * Beams with rigid offset. An interface exist that connects GARFEM with the program GAROS. GAROS is a program for aeroelastic analysis of rotating structures. Since this interface was developed GARFEM now serves as a preprocessor program in place of NASTRAN which was formerly used. Documentation of the methods applied in GARFEM exists but is so far limited to the capacities in existence before the GAROS interface was developed.

  15. YUCCA MOUNTAIN SITE DESCRIPTION

    Energy Technology Data Exchange (ETDEWEB)

    A.M. Simmons

    2004-04-16

    The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel.

  16. YUCCA MOUNTAIN SITE DESCRIPTION

    International Nuclear Information System (INIS)

    Simmons, A.M.

    2004-01-01

    The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel

  17. Synthetic Biology Open Language (SBOL) Version 2.2.0

    KAUST Repository

    Cox, Robert Sidney

    2018-04-04

    Synthetic biology builds upon the techniques and successes of genetics, molecular biology, and metabolic engineering by applying engineering principles to the design of biological systems. The field still faces substantial challenges, including long development times, high rates of failure, and poor reproducibility. One method to ameliorate these problems would be to improve the exchange of information about designed systems between laboratories. The synthetic biology open language (SBOL) has been developed as a standard to support the specification and exchange of biological design information in synthetic biology, filling a need not satisfied by other pre-existing standards. This document details version 2.2.0 of SBOL that builds upon version 2.1.0 published in last year\\'s JIB special issue. In particular, SBOL 2.2.0 includes improved description and validation rules for genetic design provenance, an extension to support combinatorial genetic designs, a new class to add non-SBOL data as attachments, a new class for genetic design implementations, and a description of a methodology to describe the entire design-build-test-learn cycle within the SBOL data model.

  18. Zgoubi user's guide. Version 4

    International Nuclear Information System (INIS)

    Meot, F.

    1997-01-01

    The computer code Zgoubi calculates trajectories of charged particles in magnetic and electric fields. At the origin specially adapted to the definition and adjustment of beam lines and magnetic spectrometers, it has so-evolved that it allows the study of systems including complex sequences of optical elements such as dipoles, quadrupoles, arbitrary multipoles and other magnetic or electric devices, and is able as well to handle periodic structures. Compared to other codes, it presents several peculiarities: (1) a numerical method for integrating the Lorentz equation, based on Taylor series, which optimizes computing time and provides high accuracy and strong symplecticity, (2) spin tracking, using the same numerical method as for the Lorentz equation, (3) calculation of the synchrotron radiation electric field and spectra in arbitrary magnetic fields, from the ray-tracing outcomes, (4) the possibility of using a mesh, which allows ray-tracing from simulated or measured (1-D, 2-D or 3-D) field maps, (5) Monte Carlo procedures: unlimited number of trajectories, in-flight decay, etc. (6) built-in fitting procedure, (7) multiturn tracking in circular accelerators including many features proper to machine parameter calculation and survey, and also the simulation of time-varying power supplies. The initial version of the Code, dedicated to the ray-tracing in magnetic fields, was developed by D. Garreta and J.C. Faivre at CEN-Saclay in the early 1970's. It was perfected for the purpose of studying the four spectrometers (SPES I, II, III, IV) at the Laboratoire National Saturne (CEA-Saclay, France), and SPEG at Ganil (Caen, France). It is now in use in several national and foreign laboratories. This manual is intended only to describe the details of the most recent version of Zogoubi, which is far from being a open-quotes finished productclose quotes

  19. Documentation for the machine-readable version of A Catalogue of Extragalactic Radio Source Identifications (Veron-Cetty and Veron 1983)

    Science.gov (United States)

    Warren, W. H., Jr.

    1983-01-01

    Detailed descriptions of the data and reference files of the updated and final version of the machine-readable catalog are given. The computerized catalog has greatly expanded since the original published version (1974), and additional information is given. A separate reference file contains bibliographical citations ordered simultaneously by numerical reference and alphabetically by author.

  20. AREST model description

    Energy Technology Data Exchange (ETDEWEB)

    Engel, D.W.; McGrail, B.P.

    1993-11-01

    The Office of Civilian Radioactive Waste Management and the Power Reactor and Nuclear Fuel Development Corporation of Japan (PNC) have supported the development of the Analytical Repository Source-Term (AREST) at Pacific Northwest Laboratory. AREST is a computer model developed to evaluate radionuclide release from an underground geologic repository. The AREST code can be used to calculate/estimate the amount and rate of each radionuclide that is released from the engineered barrier system (EBS) of the repository. The EBS is the man-made or disrupted area of the repository. AREST was designed as a system-level models to simulate the behavior of the total repository by combining process-level models for the release from an individual waste package or container. AREST contains primarily analytical models for calculating the release/transport of radionuclides to the lost rock that surrounds each waste package. Analytical models were used because of the small computational overhead that allows all the input parameters to be derived from a statistical distribution. Recently, a one-dimensional numerical model was also incorporated into AREST, to allow for more detailed modeling of the transport process with arbitrary length decay chains. The next step in modeling the EBS, is to develop a model that couples the probabilistic capabilities of AREST with a more detailed process model. This model will need to look at the reactive coupling of the processes that are involved with the release process. Such coupling would include: (1) the dissolution of the waste form, (2) the geochemical modeling of the groundwater, (3) the corrosion of the container overpacking, and (4) the backfill material, just to name a few. Several of these coupled processes are already incorporated in the current version of AREST.

  1. AREST model description

    International Nuclear Information System (INIS)

    Engel, D.W.; McGrail, B.P.

    1993-11-01

    The Office of Civilian Radioactive Waste Management and the Power Reactor and Nuclear Fuel Development Corporation of Japan (PNC) have supported the development of the Analytical Repository Source-Term (AREST) at Pacific Northwest Laboratory. AREST is a computer model developed to evaluate radionuclide release from an underground geologic repository. The AREST code can be used to calculate/estimate the amount and rate of each radionuclide that is released from the engineered barrier system (EBS) of the repository. The EBS is the man-made or disrupted area of the repository. AREST was designed as a system-level models to simulate the behavior of the total repository by combining process-level models for the release from an individual waste package or container. AREST contains primarily analytical models for calculating the release/transport of radionuclides to the lost rock that surrounds each waste package. Analytical models were used because of the small computational overhead that allows all the input parameters to be derived from a statistical distribution. Recently, a one-dimensional numerical model was also incorporated into AREST, to allow for more detailed modeling of the transport process with arbitrary length decay chains. The next step in modeling the EBS, is to develop a model that couples the probabilistic capabilities of AREST with a more detailed process model. This model will need to look at the reactive coupling of the processes that are involved with the release process. Such coupling would include: (1) the dissolution of the waste form, (2) the geochemical modeling of the groundwater, (3) the corrosion of the container overpacking, and (4) the backfill material, just to name a few. Several of these coupled processes are already incorporated in the current version of AREST

  2. Model-based version management system framework

    International Nuclear Information System (INIS)

    Mehmood, W.

    2016-01-01

    In this paper we present a model-based version management system. Version Management System (VMS) a branch of software configuration management (SCM) aims to provide a controlling mechanism for evolution of software artifacts created during software development process. Controlling the evolution requires many activities to perform, such as, construction and creation of versions, identification of differences between versions, conflict detection and merging. Traditional VMS systems are file-based and consider software systems as a set of text files. File based VMS systems are not adequate for performing software configuration management activities such as, version control on software artifacts produced in earlier phases of the software life cycle. New challenges of model differencing, merge, and evolution control arise while using models as central artifact. The goal of this work is to present a generic framework model-based VMS which can be used to overcome the problem of tradition file-based VMS systems and provide model versioning services. (author)

  3. Procedure guidelines for radioiodine therapy of differentiated thyroid cancer (version 2); Verfahrensanweisung zur Radioiodtherapie (RIT) beim differenzierten Schilddruesenkarzinom (Version 2)

    Energy Technology Data Exchange (ETDEWEB)

    Dietlein, M.; Dressler, J.; Farahati, J.; Gruenwald, F.; Leisner, E.; Moser, E.; Reiners, C.; Schicha, H.; Schober, O. [Deutsche Gesellschaft fuer Nuklearmedizin e.V., Hannover (Germany)

    2004-08-01

    The procedure guidelines for radioiodine therapy (RIT) of differentiated thyroid cancer (version 2) are the counterpart to the procedure guidelines for {sup 131}I whole-body scintigraphy (version 2) and specify the interdisciplinary guidelines for thyroid cancer of the Deutsche Krebsgesellschaft and the Deutsche Gesellschaft fuer Chirurgie concerning the nuclear medicine part. Compared with version 1 facultative options for RIT can be chosen in special cases: ablative RIT for papillary microcarcinoma {<=} 1 cm, ablative RIT for mixed forms of anaplastic and differentiated thyroid cancer, and RIT in patients with a measurable or increasing thyroglobulin concentration but without detectable metastases by imaging. The description of the pretherapeutic dosimetry now includes the isotopes {sup 123}I and {sup 124}I as well as a broader range of the activity of {sup 131}I. Activities of 2-5 GBq {sup 131}I are recommended for the first ablative RIT. If high accumulative activities of {sup 131}I are expected, men who have not yet finished their family planning should be advised to the option of sperm cryoconservation. An interdisciplinary consensus is necessary whether the new TNM-classification (UICC, 6{sup th} edition, 2002) will lead to modified recommendations for surgical or nuclear medicine therapy, especially for the surgical completeness and for the ablative RIT of pT1 papillary cancer. (orig.)

  4. Quantum gravity from descriptive set theory

    International Nuclear Information System (INIS)

    El Naschie, M.S.

    2004-01-01

    We start from Hilbert's criticism of the axioms of classical geometry and the possibility of abandoning the Archimedean axiom. Subsequently we proceed to the physical possibility of a fundamental limitation on the smallest length connected to certain singular points in spacetime and below which measurements become meaningless, Finally we arrive at the conclusion that maximising the Hawking-Bekenstein informational content of spacetime makes the existence of a transfinite geometry for physical 'spacetime' not only plausible but probably inevitable. The main part of the paper is then concerned with a proposal for a mathematical description of a transfinite, non-Archimedean geometry using descriptive set theory. Nevertheless, and despite all abstract mathematics, we remain quite close to similar lines of investigation initiated by physicists like A. Wheeler, D. Finkelstein and G. 'tHooft. In particular we introduce a logarithmic gauge transformation linking classical gravity with the electro weak via a version of informational entropy. That way we may claim to have accomplished an important step towards a general theory of quantum gravity using ε (∞) and complexity theory and finding that α G =(2) α-bar ew -1 congruent with (1.7)(10) 38 where α G is the dimensionless Newton gravity constant, and α ew ≅128 is the fine structure constant at the electro weak scale

  5. COG Software Architecture Design Description Document

    Energy Technology Data Exchange (ETDEWEB)

    Buck, R M; Lent, E M

    2009-09-21

    This COG Software Architecture Design Description Document describes the organization and functionality of the COG Multiparticle Monte Carlo Transport Code for radiation shielding and criticality calculations, at a level of detail suitable for guiding a new code developer in the maintenance and enhancement of COG. The intended audience also includes managers and scientists and engineers who wish to have a general knowledge of how the code works. This Document is not intended for end-users. This document covers the software implemented in the standard COG Version 10, as released through RSICC and IAEA. Software resources provided by other institutions will not be covered. This document presents the routines grouped by modules and in the order of the three processing phases. Some routines are used in multiple phases. The routine description is presented once - the first time the routine is referenced. Since this is presented at the level of detail for guiding a new code developer, only the routines invoked by another routine that are significant for the processing phase that is being detailed are presented. An index to all routines detailed is included. Tables for the primary data structures are also presented.

  6. The 1991 version of the plume impingement computer program. Volume 1: Description

    Science.gov (United States)

    Bender, Robert L.; Somers, Richard E.; Prendergast, Maurice J.; Clayton, Joseph P.; Smith, Sheldon D.

    1991-01-01

    The objective of this contract was to continue development of a vacuum plume impingement evaluator to provide an analyst with a capability for rapid assessment of thruster plume impingement scenarios. The research was divided into three areas: Plume Impingement Computer Program (PLIMP) modification/validation; graphics development; and documentation in the form of a Plume Handbook and PLIMP Input Guide.

  7. Depth and stratigraphy of Quaternary deposits. Preliminary site description Laxemar subarea - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Nyman, Helena [SWECO Position AB, Stockholm (Sweden)

    2005-09-01

    This report aims at describing the modelled Quaternary deposits (QD) depth according to six layers with different geological and hydrological properties in the Simpevarp regional model area. The program used in the modelling of QD depths is the GeoEditor, which is an ArcView3.3-extension. The input data used in the model consist of 102 boreholes and 328 observation points. As input is also a large number of observation points interpreted from geophysical investigations used; 1,087 points based on refraction seismic measurements (distributed in 31 profiles), 22 points from electrical soundings (VES) and 19,237 points from seismic and sediment echo sounding data. The outer part of the area has a low data density. Some of the used points are generally not very deep and do not describe the actual bedrock elevation. They do, however, describe the minimum QD depth at each location. A detailed topographical Digital Elevation Model (DEM), the maps of Quaternary deposits and outcrops were also used. The model is based on a three-layer-principle where each layer can be given similar properties. The uppermost layer, Z1, has been influenced by the impact from surface processes, e.g. roots and biological activity. The bottom layer, Z3, is characterized by contact with the bedrock and is corresponding to a till layer. The middle layer, Z2, is corresponding to a clay layer and assumed to have different hydraulic qualities than Z1 and Z3. Besides those layers, another three layers are also modelled; M1 corresponds to a peat layer, M2 answers to a glaciofluvial sediment layer and M3 corresponds to a layer with artificial fill. All layers can have thickness zero. The resulting model clearly shows the valleys with thicker depths of QD, surrounded by areas with thinner or no depths. The esker near Faarbo (Tunaaasen) is also distinctly marked in the south-western area. The northern and central part of the model area are characterized by numerous bedrock outcrops. The maximum depth of QD in the model is about 50 m, and the average depth in this area is 2.1 m with outcrops included and 3.0 m with outcrops excluded.

  8. Software Design Description for the HYbrid Coordinate Ocean Model (HYCOM), Version 2.2

    Science.gov (United States)

    2009-02-12

    dimension a(na,n),v(nv,n) I/O: print 115, 116 Uses: None tridcof Computes coefficients for tridiagonal matrix (dimension=kdm). Note: tcu (1) = 0 and tcl...kdm+1) = 0 are necessary conditions. Calling Sequence: subroutine tridcof(diff,tri,nlayer, tcu ,tcc,tcl) Data Declaration: real diff, tri, tcu , tcc...surfaceflux/(h(1)*bet), and -bottom layer needs +tri(nlayer,1)*diff(nlayer+1)*yo(nlayer+1))/bet Calling Sequence: subroutine tridmat( tcu ,tcc,tcl,nlayer,h

  9. Detailed Analysis of Alternatives Report. Version 2.0. Technology Descriptions. Volume 7.

    Science.gov (United States)

    1993-07-01

    dicyclopentadiene OF degrees Fahrenheit OPHGB organophosphorus compounds, GB-agent related OPHP organophosphorus Compounds; pesticide related OSCH organosulfur ...compounds; herbicide related OSCM organosulfur Compounds; mustard agent related OSHA Occupational Health and Safety Administration PAHs polynuclear

  10. Software Design Description for the Polar Ice Prediction System (PIPS) Version 3.0

    Science.gov (United States)

    2008-11-05

    esnon, Tsfcn), this subroutine computes variables needed for the vertical thermodynamics (hin, hsn, qin, qsn, Tin, Tsn , Tsf). I/O: stdout Calls...layer thickness real hin_init- initial value of hin real hsn_init- initial value of hsn real qsn- snow enthalpy real Tsn - snow temperature real...m2) real qsn- snow enthalpy real Tsn - internal snow temperature real Tsf- ice/snow surface temperature, Tsfcn real fsensn- surface downward

  11. The forest inventory and analysis database description and users manual version 1.0

    Science.gov (United States)

    Patrick D. Miles; Gary J. Brand; Carol L. Alerich; Larry F. Bednar; Sharon W. Woudenberg; Joseph F. Glover; Edward N. Ezell

    2001-01-01

    Describes the structure of the Forest Inventory and Analysis Database (FIADB) and provides information on generating estimates of forest statistics from these data. The FIADB structure provides a consistent framework for storing forest inventory data across all ownerships across the entire United States. These data are available to the public.

  12. Description of background data in the SKB database GEOTAB. Version 2

    International Nuclear Information System (INIS)

    Eriksson, E.; Sehlstedt, S.

    1991-03-01

    During the research and development program performed by SKB for the final disposal of spent nuclear fuel, a large quantity of geoscientific data was collected. Most of this data was stored in a database called Geotab. The data is organized into eight groups as follows: Background information; Geological data; Borehole geophysical measurements; Ground surface geophysical measurements; Hydrogeological and meteorological data; Hydrochemical data; Petrophysical measurements and Tracer tests. Except for the case of borehole geophysical data, ground surface geophysical data and petrophysical data, described in the same report, the data in each group is described in a separate SKB report. The present report describes data within the Background data group. This data provides information on the location of areas studied, borehole positions and also some drilling information. Data is normally collected on forms or as notes and this is then stored into the database. The background data group, called BACKGROUND, is divided into several subgroups: BGAREA area background data; BGDRILL drilling information; BGDRILLP drill penetration data; BGHOLE borehole information; BGTABLES number of rows in a table and BGTOLR data table tolerance. A method consist of one or several data tables. In each chapter a method and its data tables are described. (authors)

  13. CMM-Based Appraisal for Internal Process Improvement (CBA IPI) Version 1.2 Method Description

    National Research Council Canada - National Science Library

    Dunaway, Donna

    2001-01-01

    .... The method helps an organization to gain insight into its software development capability by identifying strengths and weaknesses of its current processes related to the Capability Maturity Model(registered) for Software V1.1...

  14. Software Design Description for the Navy Coastal Ocean Model (NCOM) Version 4.0

    Science.gov (United States)

    2008-12-31

    lr,ta,nta,mta,lta,sa,nsa,msa,l sa,ra,nra,mra,lra,bn,nbn,mbn,lbn,bp,nbp,mbp,lbp,bz,nbz,mbz,l bz,bd,nbd,mbd,lbd,q,nq,mq,lq,ql,nql, mql ,lql,xkm,nxkm,mxkm...lbn,nbp,mbp,lb p,nbz,mbz,lbz,nbd,mbd,lbdnq,mq,lq,nql, mql ,lql, nxkm,mxkm,lxkm,nykm,mykm,lykm,nxkh,mxk h,lxkh,nykh,mykh,lykh,nzkm,mzkm,lzkm,nzkh, mzkh

  15. Versions of Time Series for Classical Solar Indices and an Adequate Description of Solar Activity

    Science.gov (United States)

    Nagovitsyn, Yu. A.; Georgieva, K.

    2017-12-01

    This article discusses issues relevant to the 2015 recalibration of the time series of classical solar indices. It shows that the Wolf numbers WN and the group numbers GN are sensitive to the quality of the observations underpinning the reconstructions of the relevant time series, given the intermittent recordings in the 17th and 18th centuries. The authors suggest that research efforts should focus on the compilation of a long series of total sunspot areas (absolute sunspot magnetic flux), because, on the one hand, this series is less sensitive to poor-quality observations, while, on the other hand, it reflects a clear physical index.

  16. Anthropogenic Biomes of the World, Version 1

    Data.gov (United States)

    National Aeronautics and Space Administration — The Anthropogenic Biomes of the World Dataset, Version 1 describes globally- significant ecological patterns within the terrestrial biosphere caused by sustained...

  17. StreamStats, version 4

    Science.gov (United States)

    Ries, Kernell G.; Newson, Jeremy K.; Smith, Martyn J.; Guthrie, John D.; Steeves, Peter A.; Haluska, Tana L.; Kolb, Katharine R.; Thompson, Ryan F.; Santoro, Richard D.; Vraga, Hans W.

    2017-10-30

    IntroductionStreamStats version 4, available at https://streamstats.usgs.gov, is a map-based web application that provides an assortment of analytical tools that are useful for water-resources planning and management, and engineering purposes. Developed by the U.S. Geological Survey (USGS), the primary purpose of StreamStats is to provide estimates of streamflow statistics for user-selected ungaged sites on streams and for USGS streamgages, which are locations where streamflow data are collected.Streamflow statistics, such as the 1-percent flood, the mean flow, and the 7-day 10-year low flow, are used by engineers, land managers, biologists, and many others to help guide decisions in their everyday work. For example, estimates of the 1-percent flood (which is exceeded, on average, once in 100 years and has a 1-percent chance of exceedance in any year) are used to create flood-plain maps that form the basis for setting insurance rates and land-use zoning. This and other streamflow statistics also are used for dam, bridge, and culvert design; water-supply planning and management; permitting of water withdrawals and wastewater and industrial discharges; hydropower facility design and regulation; and setting of minimum allowed streamflows to protect freshwater ecosystems. Streamflow statistics can be computed from available data at USGS streamgages depending on the type of data collected at the stations. Most often, however, streamflow statistics are needed at ungaged sites, where no streamflow data are available to determine the statistics.

  18. MCNP(trademark) Version 5

    International Nuclear Information System (INIS)

    Cox, Lawrence J.; Barrett, Richard F.; Booth, Thomas Edward; Briesmeister, Judith F.; Brown, Forrest B.; Bull, Jeffrey S.; Giesler, Gregg Carl; Goorley, John T.; Mosteller, Russell D.; Forster, R. Arthur; Post, Susan E.; Prael, Richard E.; Selcow, Elizabeth Carol; Sood, Avneet

    2002-01-01

    The Monte Carlo transport workhorse, MCNP, is undergoing a massive renovation at Los Alamos National Laboratory (LANL) in support of the Eolus Project of the Advanced Simulation and Computing (ASCI) Program. MCNP Version 5 (V5) (expected to be released to RSICC in Spring, 2002) will consist of a major restructuring from FORTRAN-77 (with extensions) to ANSI-standard FORTRAN-90 with support for all of the features available in the present release (MCNP-4C2/4C3). To most users, the look-and-feel of MCNP will not change much except for the improvements (improved graphics, easier installation, better online documentation). For example, even with the major format change, full support for incremental patching will still be provided. In addition to the language and style updates, MCNP V5 will have various new user features. These include improved photon physics, neutral particle radiography, enhancements and additions to variance reduction methods, new source options, and improved parallelism support (PVM, MPI, OpenMP).

  19. Descriptive assessment for physical education

    OpenAIRE

    Pirih Tavčar, Ksenija

    2016-01-01

    Descriptive grading is a type of grading in which opinions about children’s knowledge or products are expressed in sentences. This opinion highlights what individual children know or have mastered, what they have not mastered, and what they should do to improve. In descriptive grading, the pupil’s work is assessed in terms of learning objectives. In their descriptive grades, physical education (PE) teachers write down everything that they have taught and reviewed with their pupils during t...

  20. Olkiluoto biosphere description 2006

    International Nuclear Information System (INIS)

    Haapanen, R.; Aro, L.; Ilvesniemi, H.; Kareinen, T.; Kirkkala, T.; Mykrae, S.; Turkki, H.; Lahdenperae, A.-M.; Ikonen, A.T.K.

    2007-02-01

    This report summarises the current knowledge of the biosphere of Olkiluoto, and it is the first Biosphere Description Report. The elements considered were climate, topography, land use, overburden, terrestrial vegetation and fauna and sea flora, fauna and water. The principal aim was to present a synthesis of the present state (now to 2020) and the main features of past evolution of the biosphere at the site using currently available data. The lack of site specific parameters and their importance was discussed. Conceptual ecosystem models are presented for land and sea. Currently available data made it possible to calculate the biomass of the terrestrial vegetation and further convert it to carbon. In the case of terrestrial animals, preliminary figures are given for moose alone due to lack of sitespecific data. For the same reason, the sea ecosystem model was not quantified within this work. The ecosystems on Olkiluoto do not deviate from the surrounding areas. Since mires are few on Olkiluoto, forests are the most important land ecosystem. However, coastal areas are the transition zones between land and sea, and also potential sites for deep groundwater discharge. The major interest concerning aquatic ecosystems was laid on four future lakes potentially developing from the sea due to the land up-lift. Current sea sediments near Olkiluoto are future land areas, and thus very important. Spatially, the forest ecosystems of Olkiluoto are now most comprehensively covered, while the temporal coverage is highest in sea ecosystems. Lack of data is greatest in terrestrial fauna and sea sediments. During this work, the system boundaries were crossed and the use of data over disciplines was started. The data were mostly in agreement, but some discrepancies were detected. To solve these, and to supplement the existing data, some recommendations were given. (orig.)

  1. NOAA Climate Data Record (CDR) of Ocean Heat Fluxes, Version 1.0 (Version Superseded)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Please note, this dataset has been superseded by a newer version (see below). Users should not use this version except in rare cases (e.g., when reproducing previous...

  2. NOAA Climate Data Record (CDR) of Ocean Near Surface Atmospheric Properties, Version 1 (Version Superseded)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Please note, this dataset has been superseded by a newer version (see below). Users should not use this version except in rare cases (e.g., when reproducing previous...

  3. Global Historical Climatology Network - Daily (GHCN-Daily), Version 2 (Version Superseded)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Please note, this dataset has been superseded by a newer version (see below). Users should not use this version except in rare cases (e.g., when reproducing previous...

  4. NOAA Climate Data Record (CDR) of Sea Surface Temperature - WHOI, Version 1.0 (Version Superseded)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Please note, this dataset has been superseded by a newer version (see below). Users should not use this version except in rare cases (e.g., when reproducing previous...

  5. The health care and life sciences community profile for dataset descriptions.

    Science.gov (United States)

    Dumontier, Michel; Gray, Alasdair J G; Marshall, M Scott; Alexiev, Vladimir; Ansell, Peter; Bader, Gary; Baran, Joachim; Bolleman, Jerven T; Callahan, Alison; Cruz-Toledo, José; Gaudet, Pascale; Gombocz, Erich A; Gonzalez-Beltran, Alejandra N; Groth, Paul; Haendel, Melissa; Ito, Maori; Jupp, Simon; Juty, Nick; Katayama, Toshiaki; Kobayashi, Norio; Krishnaswami, Kalpana; Laibe, Camille; Le Novère, Nicolas; Lin, Simon; Malone, James; Miller, Michael; Mungall, Christopher J; Rietveld, Laurens; Wimalaratne, Sarala M; Yamaguchi, Atsuko

    2016-01-01

    Access to consistent, high-quality metadata is critical to finding, understanding, and reusing scientific data. However, while there are many relevant vocabularies for the annotation of a dataset, none sufficiently captures all the necessary metadata. This prevents uniform indexing and querying of dataset repositories. Towards providing a practical guide for producing a high quality description of biomedical datasets, the W3C Semantic Web for Health Care and the Life Sciences Interest Group (HCLSIG) identified Resource Description Framework (RDF) vocabularies that could be used to specify common metadata elements and their value sets. The resulting guideline covers elements of description, identification, attribution, versioning, provenance, and content summarization. This guideline reuses existing vocabularies, and is intended to meet key functional requirements including indexing, discovery, exchange, query, and retrieval of datasets, thereby enabling the publication of FAIR data. The resulting metadata profile is generic and could be used by other domains with an interest in providing machine readable descriptions of versioned datasets.

  6. Trusting Description: Authenticity, Accountability, and Archival Description Standards

    Science.gov (United States)

    MacNeil, Heather

    2009-01-01

    It has been suggested that one of the purposes of archival description is to establish grounds for presuming the authenticity of the records being described. The article examines the implications of this statement by examining the relationship between and among authenticity, archival description, and archival accountability, assessing how this…

  7. Is Contralateral Templating Reliable for Establishing Rotational Alignment During Intramedullary Stabilization of Femoral Shaft Fractures? A Study of Individual Bilateral Differences in Femoral Version.

    Science.gov (United States)

    Croom, William P; Lorenzana, Daniel J; Auran, Richard L; Cavallero, Matthew J; Heckmann, Nathanael; Lee, Jackson; White, Eric A

    2018-02-01

    To determine native individual bilateral differences (IBDs) in femoral version in a diverse population. Computed tomography scans with complete imaging of uninjured bilateral femora were used to determine femoral version and IBDs in version. Age, sex, and ethnicity of each subject were also collected. Femoral version and IBDs in version were correlated with demographic variables using univariate and multivariate regression models. One hundred sixty-four subjects were included in the study. The average femoral version was 9.4 degrees (±9.4 degrees). The mean IBD in femoral version was 5.4 degrees (±4.4 degrees, P alignment during intramedullary stabilization of diaphyseal femur fractures. This is also an important consideration when considering malrotation of femur fractures because most studies define malrotation as a greater than 10-15-degree difference compared with the contralateral side. Prognostic Level IV. See Instructions for Authors for a complete description of levels of evidence.

  8. Global Precipitation Climatology Project (GPCP) - Monthly, Version 2.2 (Version Superseded)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Version 2.2 of the dataset has been superseded by a newer version. Users should not use version 2.2 except in rare cases (e.g., when reproducing previous studies...

  9. APS beamline standard components handbook, Version 1.3. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Hahn, U.; Shu, D.; Kuzay, T.M.

    1993-02-01

    This Handbook in its current version (1.3) contains descriptions, specifications, and preliminary engineering design drawings for many of the standard components. The design status and schedules have been provided wherever possible. In the near future, the APS plans to update engineering drawings of identified standard beamline components and complete the Handbook. The completed version of this Handbook will become available to both the CATs and potential vendors. Use of standard components should result in major cost reductions for CATs in the areas of beamline design and construction.

  10. System software for the NMFECC CRAY-1 version of GIFTS 4B

    International Nuclear Information System (INIS)

    Gray, W.H.; Baudry, T.V.

    1981-01-01

    The Oak Ridge National Laboratory (ORNL) maintains a version of the GIFTS system structural analysis computer programs. Executable modules are supported on two different types of computer hardware, a DECsystem-10 and a CRAY-1. Without external difference to the user, these modules execute equivalently upon both types of hardware. Presented herein are the local software enhancements for the ORNL version of GIFTS for the National Magnetic Fusion Energy Computer Center (NMFECC) CRAY-1 computer as well as a description of the ORNL implementation of the system-dependent portions of the GIFTS software library for the NMFECC CRAY-1

  11. User's guide of SWAP Version 2.0; simulation of water flow, solute transport and plant growth in the soil-water-atmosphere-plant environment

    NARCIS (Netherlands)

    Kroes, J.G.; Dam, van J.C.; Huygen, J.; Vervoort, R.W.

    2002-01-01

    This manual describes how the numerical model SWAP version 2.0.9d can be used to simulate vertical transport of water, solutes and heat in variably saturated, cultivated soils. A brief theoretical description is followed by a technical description of model structure and general data flow. An

  12. The Psychometrics of the European Portuguese Version of the Temperament and Character Inventory-Revised.

    Science.gov (United States)

    Moreira, Paulo A S; Cloninger, Claude Robert; Rocha, Maria José; Oliveira, João Tiago; Ferreira, Noémia; Gonçalves, Daniel Maffasioli; Rózsa, Sándor

    2017-01-01

    Cloninger's psychobiological model of personality integrates contributions from behavioral genetics, neurobiology, and psychology in the description of the human personality. The temperament and character inventory (TCI) is its assessment instrument. The Brazilian Portuguese version of the TCI has shown good psychometric properties. However, Portuguese spoken in Brazil presents marked and substantial differences to that spoken in Portugal, and no study has yet described the psychometrics of the European Portuguese version. The objective of this study was thus to describe the psychometric properties of the European Portuguese adult version of the TCI (the temperament and character inventory-revised (TCI-R)). This study involved 1400 Portuguese adult participants. The factorial structure of the European Portuguese version was tested using four methods: exploratory factor analysis, orthogonal procrustes rotation analysis, confirmatory factor analysis, and exploratory structural equation modeling. The integration of data coming from these methods suggested that the Portuguese version of the TCI-R presented good structural validity (as revealed by the emergence of the temperament and character structures predicted by theory) and high levels of congruence between the American and the Portuguese versions. An improvement in the goodness of fit of the models for the Portuguese population was achieved by using exploratory structural equation modeling over confirmatory factor analysis. Although some facets registered questionable consistency, all dimensions had acceptable to good consistency (all ≥ .79). These results confirm the validity of the Portuguese TCI-R and its adequacy for use in European Portuguese samples.

  13. Modelling object typicality in description logics - [Workshop on Description Logics

    CSIR Research Space (South Africa)

    Britz, K

    2009-07-01

    Full Text Available The authors presents a semantic model of typicality of concept members in description logics that accords well with a binary, globalist cognitive model of class membership and typicality. The authors define a general preferential semantic framework...

  14. USGS Spectral Library Version 7

    Science.gov (United States)

    Kokaly, Raymond F.; Clark, Roger N.; Swayze, Gregg A.; Livo, K. Eric; Hoefen, Todd M.; Pearson, Neil C.; Wise, Richard A.; Benzel, William M.; Lowers, Heather A.; Driscoll, Rhonda L.; Klein, Anna J.

    2017-04-10

    We have assembled a library of spectra measured with laboratory, field, and airborne spectrometers. The instruments used cover wavelengths from the ultraviolet to the far infrared (0.2 to 200 microns [μm]). Laboratory samples of specific minerals, plants, chemical compounds, and manmade materials were measured. In many cases, samples were purified, so that unique spectral features of a material can be related to its chemical structure. These spectro-chemical links are important for interpreting remotely sensed data collected in the field or from an aircraft or spacecraft. This library also contains physically constructed as well as mathematically computed mixtures. Four different spectrometer types were used to measure spectra in the library: (1) Beckman™ 5270 covering the spectral range 0.2 to 3 µm, (2) standard, high resolution (hi-res), and high-resolution Next Generation (hi-resNG) models of Analytical Spectral Devices (ASD) field portable spectrometers covering the range from 0.35 to 2.5 µm, (3) Nicolet™ Fourier Transform Infra-Red (FTIR) interferometer spectrometers covering the range from about 1.12 to 216 µm, and (4) the NASA Airborne Visible/Infra-Red Imaging Spectrometer AVIRIS, covering the range 0.37 to 2.5 µm. Measurements of rocks, soils, and natural mixtures of minerals were made in laboratory and field settings. Spectra of plant components and vegetation plots, comprising many plant types and species with varying backgrounds, are also in this library. Measurements by airborne spectrometers are included for forested vegetation plots, in which the trees are too tall for measurement by a field spectrometer. This report describes the instruments used, the organization of materials into chapters, metadata descriptions of spectra and samples, and possible artifacts in the spectral measurements. To facilitate greater application of the spectra, the library has also been convolved to selected spectrometer and imaging spectrometers sampling and

  15. TOUGH2 User's Guide Version 2

    Energy Technology Data Exchange (ETDEWEB)

    Pruess, K.; Oldenburg, C.M.; Moridis, G.J.

    1999-11-01

    TOUGH2 is a numerical simulator for nonisothermal flows of multicomponent, multiphase fluids in one, two, and three-dimensional porous and fractured media. The chief applications for which TOUGH2 is designed are in geothermal reservoir engineering, nuclear waste disposal, environmental assessment and remediation, and unsaturated and saturated zone hydrology. TOUGH2 was first released to the public in 1991; the 1991 code was updated in 1994 when a set of preconditioned conjugate gradient solvers was added to allow a more efficient solution of large problems. The current Version 2.0 features several new fluid property modules and offers enhanced process modeling capabilities, such as coupled reservoir-wellbore flow, precipitation and dissolution effects, and multiphase diffusion. Numerous improvements in previously released modules have been made and new user features have been added, such as enhanced linear equation solvers, and writing of graphics files. The T2VOC module for three-phase flows of water, air and a volatile organic chemical (VOC), and the T2DM module for hydrodynamic dispersion in 2-D flow systems have been integrated into the overall structure of the code and are included in the Version 2.0 package. Data inputs are upwardly compatible with the previous version. Coding changes were generally kept to a minimum, and were only made as needed to achieve the additional functionalities desired. TOUGH2 is written in standard FORTRAN77 and can be run on any platform, such as workstations, PCs, Macintosh, mainframe and supercomputers, for which appropriate FORTRAN compilers are available. This report is a self-contained guide to application of TOUGH2 to subsurface flow problems. It gives a technical description of the TOUGH2 code, including a discussion of the physical processes modeled, and the mathematical and numerical methods used. Illustrative sample problems are presented along with detailed instructions for preparing input data.

  16. DOE-2 supplement: Version 2.1E

    Energy Technology Data Exchange (ETDEWEB)

    Winkelmann, F.C.; Birdsall, B.E.; Buhl, W.F.; Ellington, K.L.; Erdem, A.E. [Lawrence Berkeley Lab., CA (United States); Hirsch, J.J.; Gates, S. [Hirsch (James J.) and Associates, Camarillo, CA (United States)

    1993-11-01

    This publication updates the DOE-2 Supplement form version 2.1D to version to 2.1E. It contains detailed discussions and instructions for using the features and enhancements introduced into the 2.1B, 2.1C, 2.1D, and 2.1E versions of the program. The building description section contains information on input functions in loads and systems, hourly report frequencies, saving files of hourly output for post processing, sharing hourly report data among program modules, the metric option, and input macros and general library features. The loads section contains information on sunspaces, sunspace modeling, window management and solar radiation, daylighting, trombe walls, fixed shades, fins and overhangs, shade schedules, self shades, heat distribution from lights, the Sherman-Grimsrud infiltrations method. terrain and height modification to wind speed, floor multipliers and interior wall types, improved exterior infrared radiation loss calculation, improved outside air film conductance calculation, window library, window frames, and switchable glazing. The systems section contains information on energy end use and meters, powered induction units, a packaged variable volume -- variable temperature system, a residential variable volume -- variable temperature system, air source heat pump enhancements, water loop heat pump enhancements, variable speed electric heat pump, gas heat pumps, hot water heaters, evaporative cooling, total gas solid-desiccant systems, add on desiccant cooling, water cooled condensers, evaporative precoolers outside air economizer control, optimum fan start, heat recovery from refrigerated case work, night ventilation, baseboard heating, moisture balance calculations, a residential natural ventilation algorithm, improved cooling coil model, system sizing and independent cooling and heating sizing ratios. The plant section contains information on energy meters, gas fired absorption chillers, engine driven compressor chillers, and ice energy storage.

  17. A new version of the event generator Sibyll

    CERN Document Server

    Riehn, Felix; Fedynitch, Anatoli; Gaisser, Thomas K.; Stanev, Todor

    2016-01-01

    The event generator Sibyll can be used for the simulation of hadronic multiparticle production up to the highest cosmic ray energies. It is optimized for providing an economic description of those aspects of the expected hadronic final states that are needed for the calculation of air showers and atmospheric lepton fluxes. New measurements from fixed target and collider experiments, in particular those at LHC, allow us to test the predictive power of the model version 2.1, which was released more than 10 years ago, and also to identify shortcomings. Based on a detailed comparison of the model predictions with the new data we revisit model assumptions and approximations to obtain an improved version of the interaction model. In addition a phenomenological model for the production of charm particles is implemented as needed for the calculation of prompt lepton fluxes in the energy range of the astrophysical neutrinos recently discovered by IceCube. After giving an overview of the new ideas implemented in Sibyll...

  18. Integrated Global Radiosonde Archive (IGRA) Version 2

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Integrated Global Radiosonde Archive (IGRA) Version 2 consists of quality-controlled radiosonde observations of temperature, humidity, and wind at stations across...

  19. Anthropogenic Biomes of the World, Version 1

    Data.gov (United States)

    National Aeronautics and Space Administration — The Anthropogenic Biomes of the World, Version 1 data set describes globally-significant ecological patterns within the terrestrial biosphere caused by sustained...

  20. Validation of a Yoruba version of the arthritis self-efficacy scale.

    Science.gov (United States)

    Adegoke, B O A; Odole, A C; Adekunle-Balogun, A T; Umar, I

    2016-06-01

    The Arthritis Self Efficacy Scale (ASES) measures a patient's perceived efficacy to cope with the consequences of chronic arthritis. The aim of this, study was to translate ASES in to Yoruba, one of the indigenous Nigerian languages, and to investigate the validity and reliability of the translated version. Forty one (21 males; 20 females).patients diagnosed with arthritis participated in this cross sectional survey, although only thirty seven (87.8%) were available for the reliability study. The ASES was translated to Yoruba language using forward-backward translations. Participants completed both English and Yoruba version of ASES on the first day while the second administration of the two versions of ASES was.. completed at one week after the first administrations. Data was analyzed -using descriptive statistics, Spearman correlation and intra-class correlation (at p=0.05). There was a significant direct correlation (pcorrelation (phealth outcomes assessment in Yoruba-speaking populations.

  1. Detector Description Framework in LHCb

    CERN Document Server

    Ponce, Sébastien

    2003-01-01

    The Gaudi architecture and framework are designed to provide a common infrastructure and environment for simulation, filtering, reconstruction and analysis applications. In this context, a Detector Description Service was developed in LHCb in order to also provide easy and coherent access to the description of the experimental apparatus. This service centralizes every information about the detector, including geometry, materials, alignment, calibration, structure and controls. From the proof of concept given by the first functional implementation of this service late 2000, the Detector Description Service has grown and has become one of the major components of the LHCb software, shared among all applications, including simulation, reconstruction, analysis and visualization. We describe here the full and functional implementation of the service. We stress the easiness of customization and extension of the detector description by the user, on the seamless integration with condition databases in order to handle ...

  2. SHUFFLE. Windows 95/98/2000 version

    International Nuclear Information System (INIS)

    Slavic, S.; Zefran, B.

    2000-01-01

    Program package SHUFFLE was developed to help the user during fuel loading and unloading operations at a nuclear power plant. The first version, developed in 1992, has been written in the CLIPPER program language and run under the DOS operating system. Since the DOS environment exhibits several drawbacks regarding code portability and flexibility, the recent SHUFFLE version has been transformed to run under the MS Windows operating system. (author)

  3. The bidimensional neutron transport code TWOTRAN-GG. Users manual and input data TWOTRAN-TRACA version; El codigo de transporte bidimensional TWOTRAN-GG. Manual de usuario y datos de entrada version TWOTRAN-TRACA

    Energy Technology Data Exchange (ETDEWEB)

    Ahnert, C.; Aragones, J. M.

    1981-07-01

    This Is a users manual of the neutron transport code TWOTRAN-TRACA, which is a version of the original TWOTRAN-GG from the Los Alamos Laboratory, with some modifications made at JEN. A detailed input data description is given as well as the new modifications developed at JEN. (Author) 8 refs.

  4. The Factor Structure and Validity of the Persian Version of the Baumrind Parenting Style Inventory

    OpenAIRE

    اصغر مینائی; سپیده نیک زاد

    2017-01-01

    In this study, the factor structure and validity of the Persian version of the Baumrind parenting style inventory were evaluated among 576 mothers of elementary school students in Tehran who had been selected through multistage cluster sampling method. This study is, due to its subject and purposes a descriptive study based on psychometric methods. The factor structure of the inventory was tested by AMOS software based on the fitting and modification indicators in the confirmatory factor anal...

  5. Ladtap XL Version 2017: A Spreadsheet For Estimating Dose Resulting From Aqueous Releases

    Energy Technology Data Exchange (ETDEWEB)

    Minter, K. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Jannik, T. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-06-15

    LADTAP XL© is an EXCEL© spreadsheet used to estimate dose to offsite individuals and populations resulting from routine and accidental releases of radioactive materials to the Savannah River. LADTAP XL© contains two worksheets: LADTAP and IRRIDOSE. The LADTAP worksheet estimates dose for environmental pathways including external exposure resulting from recreational activities on the Savannah River and internal exposure resulting from ingestion of water, fish, and invertebrates originating from the Savannah River. IRRIDOSE estimates offsite dose to individuals and populations from irrigation of foodstuffs with contaminated water from the Savannah River. In 2004, a complete description of the LADTAP XL© code and an associated user’s manual was documented in LADTAP XL©: A Spreadsheet for Estimating Dose Resulting from Aqueous Release (WSRC-TR-2004-00059) and revised input parameters, dose coefficients, and radionuclide decay constants were incorporated into LADTAP XL© Version 2013 (SRNL-STI-2011-00238). LADTAP XL© Version 2017 is a slight modification to Version 2013 with minor changes made for more user-friendly parameter inputs and organization, updates in the time conversion factors used within the dose calculations, and fixed an issue with the expected time build-up parameter referenced within the population shoreline dose calculations. This manual has been produced to update the code description, verification of the models, and provide an updated user’s manual. LADTAP XL© Version 2017 has been verified by Minter (2017) and is ready for use at the Savannah River Site (SRS).

  6. Iranian version of a face version of the modified child dental anxiety scale: Transcultural adaptation and reliability analysis

    Directory of Open Access Journals (Sweden)

    Shahrzad Javadinejad

    2011-01-01

    Full Text Available Background: A novel version of the Modified Child Dental Anxiety Scale (MCDAS was developed by addition of faces rating scale to the original numeric form. The aim of this prospective descriptive study was to perform a transcultural adaptation and reliability analysis of the Iranian version of Faces version of Modified Child Dental Anxiety Scale (MCDAS f and the Dental Subscale of the Children′s Fear Survey Schedule (CFSS-DS. Methods: To determine the test-retest reliability, 200 school-children aged 8-12 years completed the MCDAS f and the CFSS-DS on two separate occasions, 2 weeks apart. To determine the criterion validity, all participants completed two questionnaires at the same sitting. The translated instrument was tested for internal consistency by Cronbach′s alpha, inter-item, and item-total correlation coefficients. Correlation between the MCDAS f and CFSS-DS mean scores and age were calculated using the Pearson correlation coefficient. Results: The intraclass correlation coefficients ranged from 0.158 to 0.658 (P < 0.01 for the individual items of the MCDAS f between the first and the second assessments and also, ranged from 0.350 to 0.677 (P < 0.01 for CFSS-DS. The internal consistencies (Cronbach′s alpha were 0.85 and 0.92 for the MCDAS f and CFSS-DS, respectively. The correlation between the MCDAS f and CFSS-DS was 0.73 (P < 0.001. The MCDAS f and the CFSS-DS scores at the first administration were significantly greater than those of the second. Conclusions: The MCDAS f is a reliable measure of dental anxiety in Iranian children aged 8-12 years, suggestive of good reliability and validity.

  7. A new version of the full wave ICRH code FISIC for plasmas with non-circular flux surfaces

    International Nuclear Information System (INIS)

    Kruecken, T.

    1988-12-01

    A user's manual for a new version of the FISIC code which is now applicable to arbitrary (toroidal) geometry is presented. It contains a description of the input parameters and quantities as well of all subroutines and a list of all common blocks. (orig.)

  8. The bidimensional neutron transport code TWOTRAN-GG. Users manual and input data TWOTRAN-TRACA version

    International Nuclear Information System (INIS)

    Ahnert, C.; Aragones, J. M.

    1981-01-01

    This Is a users manual of the neutron transport code TWOTRAN-TRACA, which is a version of the original TWOTRAN-GG from the Los Alamos Laboratory, with some modifications made at JEN. A detailed input data description is given as well as the new modifications developed at JEN. (Author) 8 refs

  9. London SPAN version 4 parameter file format

    International Nuclear Information System (INIS)

    2004-06-01

    Powernext SA is a Multilateral Trading Facility in charge of managing the French power exchange through an optional and anonymous organised trading system. Powernext SA collaborates with the clearing organization LCH.Clearnet SA to secure and facilitate the transactions. The French Standard Portfolio Analysis of Risk (SPAN) is a system used by LCH.Clearnet to calculate the initial margins from and for its clearing members. SPAN is a computerized system which calculates the impact of several possible variations of rates and volatility on by-product portfolios. The initial margin call is equal to the maximum probable loss calculated by the system. This document contains details of the format of the London SPAN version 4 parameter file. This file contains all the parameters and risk arrays required to calculate SPAN margins. London SPAN Version 4 is an upgrade from Version 3, which is also known as LME SPAN. This document contains the full revised file specification, highlighting the changes from Version 3 to Version 4

  10. Psychometric assessment of the Spiritual Climate Scale Arabic version for nurses in Saudi Arabia.

    Science.gov (United States)

    Cruz, Jonas Preposi; Albaqawi, Hamdan Mohammad; Alharbi, Sami Melbes; Alicante, Jerico G; Vitorino, Luciano M; Abunab, Hamzeh Y

    2017-12-07

    To assess the psychometric properties of the Spiritual Climate Scale Arabic version for Saudi nurses. Evidence showed that a high level of spiritual climate in the workplace is associated with increased productivity and performance, enhanced emotional intelligence, organisational commitment and job satisfaction among nurses. A convenient sample of 165 Saudi nurses was surveyed in this descriptive, cross-sectional study. Cronbach's α and intraclass correlation coefficient of the 2 week test-retest scores were computed to establish reliability. Exploratory factor analysis was performed to support the validity of the Spiritual Climate Scale Arabic version. The Spiritual Climate Scale Arabic version manifested excellent content validity. Exploratory factor analysis supported a single factor with an explained variance of 73.2%. The Cronbach's α values of the scale ranged from .79 to .88, while the intraclass correlation coefficient value was .90. The perceived spiritual climate was associated with the respondents' hospital, gender, age and years of experience. Findings of this study support the sound psychometric properties of the Spiritual Climate Scale Arabic version. The Spiritual Climate Scale Arabic version can be used by nurse managers to assess the nurses' perception of the spiritual climate in any clinical area. This process can lead to spiritually centred interventions, thereby ensuring a clinical climate that accepts and respects different spiritual beliefs and practices. © 2017 John Wiley & Sons Ltd.

  11. CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT

    International Nuclear Information System (INIS)

    Beesley. J.F.

    2005-01-01

    The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process

  12. CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    J.F. Beesley

    2005-04-21

    The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process.

  13. Fuel Handling Facility Description Document

    International Nuclear Information System (INIS)

    M.A. LaFountain

    2005-01-01

    The purpose of the facility description document (FDD) is to establish the requirements and their bases that drive the design of the Fuel Handling Facility (FHF) to allow the design effort to proceed to license application. This FDD is a living document that will be revised at strategic points as the design matures. It identifies the requirements and describes the facility design as it currently exists, with emphasis on design attributes provided to meet the requirements. This FDD was developed as an engineering tool for design control. Accordingly, the primary audience and users are design engineers. It leads the design process with regard to the flow down of upper tier requirements onto the facility. Knowledge of these requirements is essential to performing the design process. It trails the design with regard to the description of the facility. This description is a reflection of the results of the design process to date

  14. Description du langage scientifique (Description of Scientific Language)

    Science.gov (United States)

    Widdowson, H. G.

    1977-01-01

    A description of scientific language using three approaches: text, textualization, and discourse. Scientific discourse is analogous to universal deep structure; text, to surface variations in diverse languages; and textualization, to transformational processes. The relationship of the primary and secondary (scientific) cultures and their languages…

  15. Auteur Description: From the Director's Creative Vision to Audio Description

    Science.gov (United States)

    Szarkowska, Agnieszka

    2013-01-01

    In this report, the author follows the suggestion that a film director's creative vision should be incorporated into Audio description (AD), a major technique for making films, theater performances, operas, and other events accessible to people who are blind or have low vision. The author presents a new type of AD for auteur and artistic films:…

  16. The self-stigma of depression scale: Translation and validation of the Arabic version

    Directory of Open Access Journals (Sweden)

    Hussain Ahmed Darraj

    2017-01-01

    Full Text Available Background: Self-stigma may feature strongly and be detrimental for people with depression, but the understanding of its nature and prevalence is limited by the lack of psychometrically validated measures. This study is aimed to validate the Arabic version self-stigma of depression scale (SSDS among adolescents. Materials and Methods: A cross-sectional study involved 100 adolescents randomly selected. The analyses include face validation, factor analysis, and reliability testing. A test–retest was conducted within a 2-week interval. Results: The mean score for self-stigma of depression among study participants was 68.9 (Standard deviation = 8.76 median equal to 71 and range was 47. Descriptive analysis showed that the percentage of those who scored below the mean score (41.7% is shown less than those who scored above the mean score (58.3%. Preliminary construct validation analysis confirmed that factor analysis was appropriate for the Arabic-translated version of the SSDS. Furthermore, the factor analysis showed similar factor loadings to the original English version. The total internal consistency of the translated version, which was measured by Cronbach's alphas ranged from 0.70 to 0.77 for the four subscales and 0.84 for the total scale. Test–retest reliability was assessed in 65 respondents after 2 weeks. Cronbach's alphas ranged from 0.70 to 0.77 for the four subscales and 0.84 for the total scale. Conclusions: Face validity, construct validity, and reliability analysis were found satisfactory for the Arabic-translated version of the SSDS. The Arabic-translated version of the SSDS was found valid and reliable to be used in future studies, with comparable properties to the original version and to previous studies.

  17. [External cephalic version: experience about 237 versions at Port-Royal maternity].

    Science.gov (United States)

    Le Bret, T; Grangé, G; Goffinet, F; Cabrol, D

    2004-06-01

    To evaluate the effectiveness of external cephalic version for reducing the rate of cesarean section by preserving fetal safety. A retrospective review of 237 external cephalic versions between January 1, 1998 and December 31, 2000 was conducted at Port Royal maternity. The success rate of external cephalic version was 50.6%. When version failed vaginal birth could be allowed after strict evaluation. The rate of cesarean section was 12.5% in the success group and 53% in the unsuccessful group, two thirds were planned. The overall rate of vaginal birth among breech presentations was 67%. After version there were 3.4% abnormal fetal heart rate tracings and 2.9% positive Kleihauer tests. No major complications occurred. Successful external cephalic version was associated with statistically significant higher multiparity, complete breech out of the pelvis and normal amniotic fluid Volume. External cephalic version reduces the cesarean section rate by about 20.5% among breech presentations and so, lowers maternal morbidity. External cephalic version could be proposed to the patients when safety criteria are respected and close fetal monitoring is maintained.

  18. Spanish version of Colquitt's Organizational Justice Scale.

    Science.gov (United States)

    Díaz-Gracia, Liliana; Barbaranelli, Claudio; Moreno-Jiménez, Bernardo

    2014-01-01

    Organizational justice (OJ) is an important predictor of different work attitudes and behaviors. Colquitt's Organizational Justice Scale (COJS) was designed to assess employees' perceptions of fairness. This scale has four dimensions: distributive, procedural, informational, and interpersonal justice. The objective of this study is to validate it in a Spanish sample. The scale was administered to 460 Spanish employees from the service sector. 40.4% were men and 59.6% women. The Confirmatory Factor Analysis (CFA) supported the four dimensions structure for Spanish version of COJS. This model showed a better fit to data that the others models tested. Cronbach's alpha obtained for subscales ranged between .88 and .95. Correlations of the Spanish version of COJS with measures of incivility and job satisfaction were statistically significant and had a moderate to high magnitude, indicating a reasonable degree of construct validity. The Spanish version of COJS has adequate psychometric properties and may be of value in assessing OJ in Spanish setting.

  19. Geotechnical Description of Mineral Deposits

    Directory of Open Access Journals (Sweden)

    Sasvári Tibor

    1996-06-01

    Full Text Available Performing various mineral deposits extraction methods requires thorough knowledge of the rock masses` geomechanical parameters. In the geotechnical description of mineral deposits there is proposed a methodical approarch at the collection, registration, and evaluation of rock masses` geological properties for geotechnics being applied within the mining industry.

  20. Natural Language Description of Emotion

    Science.gov (United States)

    Kazemzadeh, Abe

    2013-01-01

    This dissertation studies how people describe emotions with language and how computers can simulate this descriptive behavior. Although many non-human animals can express their current emotions as social signals, only humans can communicate about emotions symbolically. This symbolic communication of emotion allows us to talk about emotions that we…

  1. Task descriptions versus use cases

    DEFF Research Database (Denmark)

    Lauesen, Søren; Kuhail, Mohammad Amin

    2011-01-01

    project: Acquire a new system to support a hotline. Among the 15 replies, eight used traditional use cases that specified a dialog between user and system. Seven used a related technique, task description, which specified the customer’s needs without specifying a dialog. It also allowed the analyst...

  2. The geometry description markup language

    International Nuclear Information System (INIS)

    Chytracek, R.

    2001-01-01

    Currently, a lot of effort is being put on designing complex detectors. A number of simulation and reconstruction frameworks and applications have been developed with the aim to make this job easier. A very important role in this activity is played by the geometry description of the detector apparatus layout and its working environment. However, no real common approach to represent geometry data is available and such data can be found in various forms starting from custom semi-structured text files, source code (C/C++/FORTRAN), to XML and database solutions. The XML (Extensible Markup Language) has proven to provide an interesting approach for describing detector geometries, with several different but incompatible XML-based solutions existing. Therefore, interoperability and geometry data exchange among different frameworks is not possible at present. The author introduces a markup language for geometry descriptions. Its aim is to define a common approach for sharing and exchanging of geometry description data. Its requirements and design have been driven by experience and user feedback from existing projects which have their geometry description in XML

  3. Marketing and Merchandising, Course Description.

    Science.gov (United States)

    Boyer, Jerome L.; Anderson, Floyd L.

    This course description was developed by educators for use at the Work Opportunity Center which was established to teach high school dropouts and/or hard-core unemployed youth. The ultimate objectives of the marketing and merchandising curriculum are to prepare students for careers in distribution and to assist them in graduating from high school.…

  4. Use cases versus task descriptions

    DEFF Research Database (Denmark)

    Lauesen, Søren; Kuhail, Mohammad Amin

    2011-01-01

    to specify require-ments for the same project: Acquire a new system to support a hotline. [Princi-pal ideas/results] Among the 15 replies, eight used traditional use cases that specified a dialog between users and system. Seven used a related technique, task description, which specified the customer's needs...

  5. Epsilon. A System Description Language

    DEFF Research Database (Denmark)

    Jensen, Kurt; Kyng, Morten

    This paper discusses the use of Petri nets as a semantic tool in the design of languages and in the construction and analysis of system descriptions. The topics treated are: -- Languages based on nets. -- The problem of time in nets. -- Nets and related models. -- Nets and formal semantics...

  6. Provenance Description of Metadata Vocabularies for the Long-term Maintenance of Metadata

    Directory of Open Access Journals (Sweden)

    Chunqiu Li

    2017-03-01

    Full Text Available Purpose: The purpose of this paper is to discuss provenance description of metadata terms and metadata vocabularies as a set of metadata terms. Provenance is crucial information to keep track of changes of metadata terms and metadata vocabularies for their consistent maintenance. Design/methodology/approach: The W3C PROV standard for general provenance description and Resource Description Framework (RDF are adopted as the base models to formally define provenance description for metadata vocabularies. Findings: This paper defines a few primitive change types of metadata terms, and a provenance description model of the metadata terms based on the primitive change types. We also provide examples of provenance description in RDF graphs to show the proposed model. Research limitations: The model proposed in this paper is defined based on a few primitive relationships (e.g. addition, deletion, and replacement between pre-version and post-version of a metadata term. The model is simplified and the practical changes of metadata terms can be more complicated than the primitive relationships discussed in the model. Practical implications: Formal provenance description of metadata vocabularies can improve maintainability of metadata vocabularies over time. Conventional maintenance of metadata terms is the maintenance of documents of terms. The proposed model enables effective and automated tracking of change history of metadata vocabularies using simple formal description scheme defined based on widely-used standards. Originality/value: Changes in metadata vocabularies may cause inconsistencies in the long-term use of metadata. This paper proposes a simple and formal scheme of provenance description of metadata vocabularies. The proposed model works as the basis of automated maintenance of metadata terms and their vocabularies and is applicable to various types of changes.

  7. MCNP Version 6.2 Release Notes

    Energy Technology Data Exchange (ETDEWEB)

    Werner, Christopher John [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Bull, Jeffrey S. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Solomon, C. J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Brown, Forrest B. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); McKinney, Gregg Walter [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Rising, Michael Evan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Dixon, David A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Martz, Roger Lee [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Hughes, Henry G. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Cox, Lawrence James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Zukaitis, Anthony J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Armstrong, J. C. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Forster, Robert Arthur [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Casswell, Laura [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2018-02-05

    Monte Carlo N-Particle or MCNP® is a general-purpose Monte Carlo radiation-transport code designed to track many particle types over broad ranges of energies. This MCNP Version 6.2 follows the MCNP6.1.1 beta version and has been released in order to provide the radiation transport community with the latest feature developments and bug fixes for MCNP. Since the last release of MCNP major work has been conducted to improve the code base, add features, and provide tools to facilitate ease of use of MCNP version 6.2 as well as the analysis of results. These release notes serve as a general guide for the new/improved physics, source, data, tallies, unstructured mesh, code enhancements and tools. For more detailed information on each of the topics, please refer to the appropriate references or the user manual which can be found at http://mcnp.lanl.gov. This release of MCNP version 6.2 contains 39 new features in addition to 172 bug fixes and code enhancements. There are still some 33 known issues the user should familiarize themselves with (see Appendix).

  8. Continuum description for jointed media

    International Nuclear Information System (INIS)

    Thomas, R.K.

    1982-04-01

    A general three-dimensional continuum description is presented for a material containing regularly spaced and approximately parallel jointing planes within a representative elementary volume. Constitutive relationships are introduced for linear behavior of the base material and nonlinear normal and shear behavior across jointing planes. Furthermore, a fracture permeability tensor is calculated so that deformation induced alterations to the in-situ values can be measured. Examples for several strain-controlled loading paths are presented

  9. GROUNDWATER PROTECTION MANAGEMENT PROGRAM DESCRIPTION.

    Energy Technology Data Exchange (ETDEWEB)

    PAQUETTE,D.E.; BENNETT,D.B.; DORSCH,W.R.; GOODE,G.A.; LEE,R.J.; KLAUS,K.; HOWE,R.F.; GEIGER,K.

    2002-05-31

    THE DEPARTMENT OF ENERGY ORDER 5400.1, GENERAL ENVIRONMENTAL PROTECTION PROGRAM, REQUIRES THE DEVELOPMENT AND IMPLEMENTATION OF A GROUNDWATER PROTECTION PROGRAM. THE BNL GROUNDWATER PROTECTION MANAGEMENT PROGRAM DESCRIPTION PROVIDES AN OVERVIEW OF HOW THE LABORATORY ENSURES THAT PLANS FOR GROUNDWATER PROTECTION, MONITORING, AND RESTORATION ARE FULLY DEFINED, INTEGRATED, AND MANAGED IN A COST EFFECTIVE MANNER THAT IS CONSISTENT WITH FEDERAL, STATE, AND LOCAL REGULATIONS.

  10. Personality: Description, Classification and Evaluation

    Directory of Open Access Journals (Sweden)

    Ibrahim Taymur

    2012-06-01

    Full Text Available Many descriptions and classifications of personality have been made to understand and acknowledge human being through out the history. During the developmental process of psychiatry, almost every school defined and assessed personality regarding to their own perspective. As DSM (Diagnostical and Statistical Manual of Mental Disorders and ICD (International Classification of Diseases being available to common usage, scientists conducted studies to set a common terminology for personality. Categorical and dimensional approaches are the most fundamentally different assessment strategies in the research and clinical aspects about personality. While categorical approach views the personality as dichotomies which consists of different groups, dimensional approach aims to describe the personality on the basis of dimensions, thus suggests that the personality is a structure formed by definite dimensions. Several advantages and disadvantages can be noticed when descriptions of personality and tools for the evaluation of personality are reviewed. When the section making suggestions about personality disorder in DSM-5 is evaluated, it is seen that it aims to restructure the personality disorder diagnostic group according to new findings and critiques. In this article, the description of personality throughout the history, dimensional, categorical and cognitive approaches to personality, the features of the tools that are used to assess and measure the personality are reviewed.

  11. Description of fiction in Wikipedia

    Directory of Open Access Journals (Sweden)

    Alenka Šauperl

    2010-01-01

    Full Text Available Subject description of fiction in the Slovenian Cooperative On-line Bibliographic Database (COBIB is still inadequate. Participation in COBIB is granted to librarians who have successfully passed the exam. As a consequence, the number of contributing librarians is limited. However, all Slovenian librarians can collaborate in the Slovenian Wikipedia. Slovenian and foreign library science researchers have proposed the structure of subject description of fiction. An analysis of articles describing nine works of fiction in five wikipedias (English, French, Spanish, Croatian and Slovenian has shown new characteristics. Drawing on these findings, a suggestion of an optimal structure is made. An article describing a work of fiction should begin with a general introductory statement comprising the name of the author, his/her nationality and genre.Translators and original title should be written if a translation is presented. Illustrators and other contributors, the background and other specific information on the work should be added if relevant. The main body of the text should be structured in the following chapters: 1 contents, 2 collection, 3 reviews and awards, 4 editions and translations, 5 adaptations, 6 see also, 7 links and 8 sources. An "infobox: book" with Slovenian adaptation and relevant categories should be inserted. Copying these Wikipedia articles into the library catalogue would enhance subject description and provide better subject access to fiction.

  12. Cross-Cultural Adaptation and Psychometric Evaluation of the Turkish Version of the Cancer Behavior Inventory-Brief Version.

    Science.gov (United States)

    Iyigun, Emine; Tastan, Sevinc; Gezginci, Elif; Korkmaz, Serap; Demiral, Selcuk; Beyzadeoglu, Murat

    2017-12-01

    Cancer Behavior Inventory-Brief Version (CBI-B) is a simple and non-burdensome tool used to evaluate the self-efficacy of the cancer patients. The aim of this study was to examine the psychometric properties of the Turkish version of the CBI-B. This methodologic study was conducted on 143 cancer patients who received radiotherapy at the Department of Radiation Oncology at a Training and Research Hospital in Turkey. Data were collected using Medical and Demographic Information Form, CBI-B, Satisfaction With Life Scale, and European Organization for Research and Treatment of Cancer Core Quality of Life Questionnaire (EORTC QLQ-C30). Descriptive statistics, exploratory factor analysis, and correlation coefficients were used for the analysis of data. Exploratory factor analysis confirmed four-factor structure explaining 74.7% of the total variance: 1) Maintaining Independence and Positive Attitude, 2) Participating in Medical Care, 3) Coping and Stress Management, and 4) Managing Affect. The CBI-B had acceptable internal consistency (Cronbach α = 0.87) and test-retest reliability (intraclass correlation coefficient = 0.961) and concurrent validity with Satisfaction With Life Scale and EORTC QLQ-C30 scores. The measures of life satisfaction and quality of life were positively correlated with CBI-B, whereas the symptom levels and the functions (with the exception of the role function) were negatively correlated. The CBI-B was found to be a valid and reliable inventory for assessing the self-efficacy of Turkish cancer patients. The CBI-B, is a simple and brief measure of self-efficacy for coping with cancer, could be easily used in clinical and research settings. Copyright © 2017 American Academy of Hospice and Palliative Medicine. Published by Elsevier Inc. All rights reserved.

  13. GHCN Version 3 Land Temperature and Version 2 Land Precipitation Dataset

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains gridded mean temperature anomalies from the Global Historical Climatology Network-Monthly (GHCN-M) version 3.3.0 temperature data set. The...

  14. Major Upgrades to the AIRS Version-6 Ozone Profile Methodology

    Science.gov (United States)

    Susskind, Joel; Blaisdell, John; Iredell, Lena

    2015-01-01

    This research is a continuation of part of what was shown at the last AIRS Science Team Meeting in the talk Improved Water Vapor and Ozone Profiles in SRT AIRS Version-6.X and the AIRS February 11, 2015 NetMeeting Further improvements in water vapor and ozone profiles compared to Version-6.AIRS Version-6 was finalized in late 2012 and is now operational. Version-6 contained many significant improvements in retrieval methodology compared to Version-5. However, Version-6 retrieval methodology used for the water vapor profile q(p) and ozone profile O3(p) retrievals is basically unchanged from Version-5, or even from Version-4. Subsequent research has made significant improvements in both water vapor and O3 profiles compared to Version-6. This talk will concentrate on O3 profile retrievals. Improvements in water vapor profile retrievals are given in a separate presentation.

  15. Hydrodynamic description of spin Calogero-Sutherland model

    Science.gov (United States)

    Abanov, Alexander; Kulkarni, Manas; Franchini, Fabio

    2009-03-01

    We study a non-linear collective field theory for an integrable spin-Calogero-Sutherland model. The hydrodynamic description of this SU(2) model in terms of charge density, charge velocity and spin currents is used to study non-perturbative solutions (solitons) and examine their correspondence with known quantum numbers of elementary excitations [1]. A conventional linear bosonization or harmonic approximation is not sufficient to describe, for example, the physics of spin-charge (non)separation. Therefore, we need this new collective bosonic field description that captures the effects of the band curvature. In the strong coupling limit [2] this model reduces to integrable SU(2) Haldane-Shastry model. We study a non-linear coupling of left and right spin currents which form a Kac-Moody algebra. Our quantum hydrodynamic description for the spin case is an extension for the one found in the spinless version in [3].[3pt] [1] Y. Kato,T. Yamamoto, and M. Arikawa, J. Phys. Soc. Jpn. 66, 1954-1961 (1997).[0pt] [2] A. Polychronakos, Phys Rev Lett. 70,2329-2331(1993).[0pt] [3] A.G.Abanov and P.B. Wiegmann, Phys Rev Lett 95, 076402(2005)

  16. Kernel versions of some orthogonal transformations

    DEFF Research Database (Denmark)

    Nielsen, Allan Aasbjerg

    Kernel versions of orthogonal transformations such as principal components are based on a dual formulation also termed Q-mode analysis in which the data enter into the analysis via inner products in the Gram matrix only. In the kernel version the inner products of the original data are replaced...... by inner products between nonlinear mappings into higher dimensional feature space. Via kernel substitution also known as the kernel trick these inner products between the mappings are in turn replaced by a kernel function and all quantities needed in the analysis are expressed in terms of this kernel...... function. This means that we need not know the nonlinear mappings explicitly. Kernel principal component analysis (PCA) and kernel minimum noise fraction (MNF) analyses handle nonlinearities by implicitly transforming data into high (even infinite) dimensional feature space via the kernel function...

  17. ADAMS/WT advanced development - version 1.4 and beyond

    Energy Technology Data Exchange (ETDEWEB)

    Elliott, A.S.; Depauw, T.R. [Mechanical Dynamics, Inc., Mesa, AZ (United States)

    1996-12-31

    ADAMS/WT is an wind-turbine-specific shell for the general-purpose mechanical system simulation package ADAMS5. It was developed under the guidance of the National Renewable Energy Laboratory to give engineers and analysts in the wind turbine community access to the analytical power of ADAMS, without having to become expert in its particular technology. The 1.4 version of ADAMS/WT is the most recent upgrade to the package, incorporating the most up-to-date version of the AeroDyn aerodynamic forcing subroutines from the University of Utah. It is also the first version to be made available on the Windows/NT platform. In version 1.4, ADAMS/WT has been significantly improved throughout and runs much faster. Automatic generation of standardized output has been added. The documentation has been extensively augmented with more detailed descriptions, more figures and more examples. ADAMS/WT remains the most powerful analytical tool available for horizontal-axis wind turbine development. 10 figs.

  18. Measuring engagement at work: validation of the Chinese version of the Utrecht Work Engagement Scale.

    Science.gov (United States)

    Fong, Ted Chun-tat; Ng, Siu-man

    2012-09-01

    Work engagement is a positive work-related state of fulfillment characterized by vigor, dedication, and absorption. Previous studies have operationalized the construct through development of the Utrecht Work Engagement Scale. Apart from the original three-factor 17-item version of the instrument (UWES-17), there exists a nine-item shortened revised version (UWES-9). The current study explored the psychometric properties of the Chinese version of the Utrecht Work Engagement Scale in terms of factorial validity, scale reliability, descriptive statistics, and construct validity. A cross-sectional questionnaire survey was conducted in 2009 among 992 workers from over 30 elderly service units in Hong Kong. Confirmatory factor analyses revealed a better fit for the three-factor model of the UWES-9 than the UWES-17 and the one-factor model of the UWES-9. The three factors showed acceptable internal consistency and strong correlations with factors in the original versions. Engagement was negatively associated with perceived stress and burnout while positively with age and holistic care climate. The UWES-9 demonstrates adequate psychometric properties, supporting its use in future research in the Chinese context.

  19. The Gaia Framework: Version Support In Web Based Open Hypermedia

    DEFF Research Database (Denmark)

    Grønbæk, Kaj; Kejser, Thomas

    2004-01-01

    The GAIA framework prototype, described herein, explores the possibilities and problems that arise when combining versioning and open hypermedia paradigms. It will be argued that it - by adding versioning as a separate service in the hypermedia architecture – is possible to build consistent...... versioning field and GAIA is compared with previous attempts at defining hypermedia versioning frameworks. GAIA is capable of multi-level versioning and versioning of structures and supports freezing mechanisms for both documents and hyperstructure. The experiences from GAIA provide an input to new reference...

  20. PC 386-based version of DORT

    International Nuclear Information System (INIS)

    Tanker, E.

    1992-01-01

    Problems encountered during the adaptation of DORT on a personal computer using a Fortran77 compiler are described, modifications done to solve these are explained. Three test cases were run with the modified version and results are compared with those obtained on an IBM 3090/200. Numerical differences were observed in the last three decimal digits of the computations at most. The running times on the PC were found to be satisfactory for these test cases

  1. TOGAF version 9 a pocket guide

    CERN Document Server

    Josey, Andrew

    2008-01-01

    This Pocket Guide is based on TOGAF Version 9 Enterprise Edition. It gives a concise introduction to TOGAF 9. What's more, it's authoritative, with material derived from The Open Group's TOGAF 9 documentation and contributions from members of The Open Group Architecture Forum. The audience for this Pocket Guide is enterprise architects, business architects, IT architects, data architects, systems architects, solutions architects, and senior managers seeking a ?rst introduction to TOGAF.

  2. Mission Data System Java Edition Version 7

    Science.gov (United States)

    Reinholtz, William K.; Wagner, David A.

    2013-01-01

    The Mission Data System framework defines closed-loop control system abstractions from State Analysis including interfaces for state variables, goals, estimators, and controllers that can be adapted to implement a goal-oriented control system. The framework further provides an execution environment that includes a goal scheduler, execution engine, and fault monitor that support the expression of goal network activity plans. Using these frameworks, adapters can build a goal-oriented control system where activity coordination is verified before execution begins (plan time), and continually during execution. Plan failures including violations of safety constraints expressed in the plan can be handled through automatic re-planning. This version optimizes a number of key interfaces and features to minimize dependencies, performance overhead, and improve reliability. Fault diagnosis and real-time projection capabilities are incorporated. This version enhances earlier versions primarily through optimizations and quality improvements that raise the technology readiness level. Goals explicitly constrain system states over explicit time intervals to eliminate ambiguity about intent, as compared to command-oriented control that only implies persistent intent until another command is sent. A goal network scheduling and verification process ensures that all goals in the plan are achievable before starting execution. Goal failures at runtime can be detected (including predicted failures) and handled by adapted response logic. Responses can include plan repairs (try an alternate tactic to achieve the same goal), goal shedding, ignoring the fault, cancelling the plan, or safing the system.

  3. Brazilian caregiver version of the Apathy Scale

    Science.gov (United States)

    Guimarães, Henrique Cerqueira; Fialho, Patricia Paes Araujo; Carvalho, Viviane Amaral; dos Santos, Etelvina Lucas; Caramelli, Paulo

    2009-01-01

    No Brazilian version of a specific scale for evaluating apathy in dementia is available. Objectives To introduce a translated version of the Apathy Scale (AS) for use with caregivers. Methods The instrument was formally translated and then administered to the caregivers of a small sample of dementia patients, in order to assess scale comprehensibility and make final adjustments. The scale was subsequently administered to the caregivers of a second, independent sample of Alzheimer’s disease (AD) patients. The content validity of the scale was tested by correlating the AS scores with the Neuropsychiatric Inventory (NPI) - apathy sub-score and Disability Assessment in Dementia (DAD) total scores. Results The first sample consisted of eleven subjects with dementia, most of whom had AD. The second sample comprised twenty patients with probable or possible AD (10 with mild dementia), a mean age of 84.1±5.8 years, and 2.2±1.6 years of schooling. The AS scores correlated with both NPI-apathy sub-score (r=0.756, p=0.001) and DAD total scores (r=–0.793, p=0.0005). Conclusions The final version had good comprehensibility and correlated strongly with standardized apathy and functional activities of daily living measures. PMID:29213647

  4. Brazilian caregiver version of the Apathy Scale

    Directory of Open Access Journals (Sweden)

    Henrique Cerqueira Guimarães

    Full Text Available Abstract No Brazilian version of a specific scale for evaluating apathy in dementia is available. Objectives: To introduce a translated version of the Apathy Scale (AS for use with caregivers. Methods: The instrument was formally translated and then administered to the caregivers of a small sample of dementia patients, in order to assess scale comprehensibility and make final adjustments. The scale was subsequently administered to the caregivers of a second, independent sample of Alzheimer's disease (AD patients. The content validity of the scale was tested by correlating the AS scores with the Neuropsychiatric Inventory (NPI - apathy sub-score and Disability Assessment in Dementia (DAD total scores. Results: The first sample consisted of eleven subjects with dementia, most of whom had AD. The second sample comprised twenty patients with probable or possible AD (10 with mild dementia, a mean age of 84.1±5.8 years, and 2.2±1.6 years of schooling. The AS scores correlated with both NPI-apathy sub-score (r=0.756, p=0.001 and DAD total scores (r=-0.793, p=0.0005. Conclusions: The final version had good comprehensibility and correlated strongly with standardized apathy and functional activities of daily living measures.

  5. EPICS Version 4 - Implementing Complex Data Types

    Energy Technology Data Exchange (ETDEWEB)

    Marty Kraimer,; John dalesio

    2012-11-27

    Through phase 1 and phase 2 SBIR grants, s fully functional I/O Controller and communication protocol for version 4 of EPICS is completed. This new software architecture provides a flexible and extendible architecture. Version 4 is implemented fully in Java. The performance metrics look promising. The final portion of phase 2 is to optimize the communication mechanisms. Subsequent work on different aspects of this are required to provide a viable solutions in various areas. Version 3 of EPICS is able to provide a platform for implementing channel based control, because the channel and attributes for time stamping, alarm, display and control were narrow, well defined, and complete. To extend EPICS functionality beyond this, it is necessary to define attributes needed for archive data, array, image data, and directory services. The proper handling of several array types enables the development of middle layer servers such as orbit and bump control in accelerators. Phase 1 should produce a well defined, reviewed, and agreed upon definition of the metadata required for these services. A Phase 2 grant would provide tools that implemented archiving, general array, imaging, and directory applications.

  6. User's guide of SWAP Version 2.0; simulation of water flow, solute transport and plant growth in the soil-water-atmosphere-plant environment

    OpenAIRE

    Kroes, J.G.; Dam, van, J.C.; Huygen, J.; Vervoort, R.W.

    2002-01-01

    This manual describes how the numerical model SWAP version 2.0.9d can be used to simulate vertical transport of water, solutes and heat in variably saturated, cultivated soils. A brief theoretical description is followed by a technical description of model structure and general data flow. An extensive explanation is given of program inputs and outputs based on ASCII text files. The manual ends with examples using important features of the model.

  7. Psychometric properties of the Turkish version of the Fraboni Scale of Ageism.

    Science.gov (United States)

    Kutlu, Yasemin; Kucuk, Leyla; Yildiz Findik, Ummu

    2012-12-01

    In this study, the reliability, validity, and psychometric properties of the Turkish version of the Fraboni Scale of Ageism were assessed. The psychometric properties of the scale were studied through a descriptive and correlational design. The study sample consisted of 231 healthy people living in the Marmara region of Turkey. In order to obtain three sets of data, a questionnaire was designed containing demographic questions and the Scale. The content validity index for the full scale was 0.98. The α coefficient for 25 items was 0.84, and the split-half reliability of the Fraboni Scale of Ageism was 0.81. The three factors represented 38.31% of the variance. In this study, we concluded that the Turkish version of the Fraboni Scale of Ageism is a suitable instrument for measuring ageism in the Turkish population. © 2012 Wiley Publishing Asia Pty Ltd.

  8. Subject categories and scope descriptions

    International Nuclear Information System (INIS)

    2002-01-01

    This document is one in a series of publications known as the ETDE/INIS Joint Reference Series. It defines the subject categories and provides the scope descriptions to be used for categorization of the nuclear literature for the preparation of INIS and ETDE input by national and regional centres. Together with the other volumes of the INIS Reference Series it defines the rules, standards and practices and provides the authorities to be used in the International Nuclear Information System and ETDE. A complete list of the volumes published in the INIS Reference Series may be found on the inside front cover of this publication. This INIS/ETDE Reference Series document is intended to serve two purposes: to define the subject scope of the International Nuclear Information System (INIS) and the Energy Technology Data Exchange (ETDE) and to define the subject classification scheme of INIS and ETDE. It is thus the guide to the inputting centres in determining which items of literature should be reported, and in determining where the full bibliographic entry and abstract of each item should be included in INIS or ETDE database. Each category is identified by a category code consisting of three alphanumeric characters. A scope description is given for each subject category. The scope of INIS is the sum of the scopes of all the categories. With most categories cross references are provided to other categories where appropriate. Cross references should be of assistance in finding the appropriate category; in fact, by indicating topics that are excluded from the category in question, the cross references help to clarify and define the scope of the category to which they are appended. A Subject Index is included as an aid to subject classifiers, but it is only an aid and not a means for subject classification. It facilitates the use of this document, but is no substitute for the description of the scope of the subject categories

  9. ELECTRICAL POWER SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    M. Maniyar

    2004-06-22

    The purpose of this revision of the System Description Document (SDD) is to establish requirements that drive the design of the electrical power system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience are design engineers. This type of SDD leads and follows the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. This SDD follows the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to this system are obtained from ''Project Functional and Operational Requirements'' (F&OR) (Siddoway, 2003). Other requirements to support the design process have been taken from higher level requirements documents such as ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), the fire hazards analyses, and the preclosure safety analysis. The above mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canori and Leitner 2003) requirements. This SDD includes several appendices with supporting information. Appendix B lists key system charts, diagrams, drawings, and lists; and Appendix C is a list of system procedures.

  10. ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    S. Roy

    2004-06-24

    The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F&OR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures.

  11. SNF AGING SYSTEM DESCRIPTION DOCUMENT

    International Nuclear Information System (INIS)

    L.L. Swanson

    2005-01-01

    The purpose of this system description document (SDD) is to establish requirements that drive the design of the spent nuclear fuel (SNF) aging system and associated bases, which will allow the design effort to proceed. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD follows the design with regard to the description of the system. The description provided in the SDD reflects the current results of the design process. Throughout this SDD, the term aging cask applies to vertical site-specific casks and to horizontal aging modules. The term overpack is a vertical site-specific cask that contains a dual-purpose canister (DPC) or a disposable canister. Functional and operational requirements applicable to this system were obtained from ''Project Functional and Operational Requirements'' (F andOR) (Curry 2004 [DIRS 170557]). Other requirements that support the design process were taken from documents such as ''Project Design Criteria Document'' (PDC) (BSC 2004 [DES 171599]), ''Site Fire Hazards Analyses'' (BSC 2005 [DIRS 172174]), and ''Nuclear Safety Design Bases for License Application'' (BSC 2005 [DIRS 171512]). The documents address requirements in the ''Project Requirements Document'' (PRD) (Canori and Leitner 2003 [DIRS 166275]). This SDD includes several appendices. Appendix A is a Glossary; Appendix B is a list of key system charts, diagrams, drawings, lists and additional supporting information; and Appendix C is a list of

  12. WASTES: Waste System Transportation and Economic Simulation--Version 2:

    International Nuclear Information System (INIS)

    Sovers, R.A.; Shay, M.R.; Ouderkirk, S.J.; McNair, G.W.; Eagle, B.G.

    1988-02-01

    The Waste System Transportation and Economic Simulation (WASTES) Technical Reference Manual was written to describe and document the algorithms used within the WASTES model as implemented in Version 2.23. The manual will serve as a reference for users of the WASTES system. The intended audience for this manual are knowledgeable users of WASTES who have an interest in the underlying principles and algorithms used within the WASTES model. Each algorithm is described in nonprogrammers terminology, and the source and uncertainties of the constants in use by these algorithms are described. The manual also describes the general philosophy and rules used to: 1) determine the allocation and priority of spent fuel generation sources to facility destinations, 2) calculate transportation costs, and 3) estimate the cost of at-reactor ex-pool storage. A detailed description of the implementation of many of the algorithms is also included in the WASTES Programmers Reference Manual (Shay and Buxbaum 1986a). This manual is separated into sections based on the general usage of the algorithms being discussed. 8 refs., 14 figs., 2 tabs

  13. Synthetic Biology Open Language (SBOL) Version 2.0.0.

    Science.gov (United States)

    Bartley, Bryan; Beal, Jacob; Clancy, Kevin; Misirli, Goksel; Roehner, Nicholas; Oberortner, Ernst; Pocock, Matthew; Bissell, Michael; Madsen, Curtis; Nguyen, Tramy; Zhang, Zhen; Gennari, John H; Myers, Chris; Wipat, Anil; Sauro, Herbert

    2015-09-04

    Synthetic biology builds upon the techniques and successes of genetics, molecular biology, and metabolic engineering by applying engineering principles to the design of biological systems. The field still faces substantial challenges, including long development times, high rates of failure, and poor reproducibility. One method to ameliorate these problems would be to improve the exchange of information about designed systems between laboratories. The Synthetic Biology Open Language (SBOL) has been developed as a standard to support the specification and exchange of biological design information in synthetic biology, filling a need not satisfied by other pre-existing standards. This document details version 2.0 of SBOL, introducing a standardized format for the electronic exchange of information on the structural and functional aspects of biological designs. The standard has been designed to support the explicit and unambiguous description of biological designs by means of a well defined data model. The standard also includes rules and best practices on how to use this data model and populate it with relevant design details. The publication of this specification is intended to make these capabilities more widely accessible to potential developers and users in the synthetic biology community and beyond.

  14. Turkish Version of the Cognitive Distortions Questionnaire: Psychometric Properties

    Directory of Open Access Journals (Sweden)

    Sedat Batmaz

    2015-01-01

    Full Text Available Cognitive distortions are interrelated with all layers of cognitions, and they may be part of the treatment once they are accessed, identified, labeled, and changed. From both a research and a clinical perspective, it is of utmost importance to disentangle cognitive distortions from similar constructs. Recently, the Cognitive Distortions Questionnaire (CD-Quest, a brief and comprehensive measure, was developed to assess both the frequency and the intensity of cognitive distortions. The aim of the present study was to assess the psychometric properties of the Turkish version of the CD-Quest in a psychiatric outpatient sample. Demographic and clinical data of the participants were analyzed by descriptive statistics. For group comparisons, Student’s t-test was applied. An exploratory principal components factor analysis was performed, followed by an oblique rotation. To assess the internal consistency of the scale Cronbach’s α was computed. The correlation coefficient was calculated for test-retest reliability over a 4-week period. For concurrent validity, bivariate Pearson correlation analyses were conducted with the measures of mood severity and negatively biased cognitions. The results revealed that the scale had excellent internal consistency, good test-retest reliability, unidimensional factor structure, and evidence of concurrent and discriminant validity.

  15. Turkish Version of the Cognitive Distortions Questionnaire: Psychometric Properties.

    Science.gov (United States)

    Batmaz, Sedat; Kocbiyik, Sibel; Yuncu, Ozgur Ahmet

    2015-01-01

    Cognitive distortions are interrelated with all layers of cognitions, and they may be part of the treatment once they are accessed, identified, labeled, and changed. From both a research and a clinical perspective, it is of utmost importance to disentangle cognitive distortions from similar constructs. Recently, the Cognitive Distortions Questionnaire (CD-Quest), a brief and comprehensive measure, was developed to assess both the frequency and the intensity of cognitive distortions. The aim of the present study was to assess the psychometric properties of the Turkish version of the CD-Quest in a psychiatric outpatient sample. Demographic and clinical data of the participants were analyzed by descriptive statistics. For group comparisons, Student's t-test was applied. An exploratory principal components factor analysis was performed, followed by an oblique rotation. To assess the internal consistency of the scale Cronbach's α was computed. The correlation coefficient was calculated for test-retest reliability over a 4-week period. For concurrent validity, bivariate Pearson correlation analyses were conducted with the measures of mood severity and negatively biased cognitions. The results revealed that the scale had excellent internal consistency, good test-retest reliability, unidimensional factor structure, and evidence of concurrent and discriminant validity.

  16. Description of a satellite experiment for isotopic-composition measurement of cosmic nuclei by the slowing-down method

    International Nuclear Information System (INIS)

    Bouffard, M.; Engelmann, J.

    1975-01-01

    Two possible versions of an experiment for launch aboard an ESRO free-flyer spacecraft in the 1980's are described. All the data quoted are, of course, preliminary. They may be used only as a basis for discussion although they are derived from well-known balloon hardware. The telescope arrangement, the description of counter, drift chamber and electronics are given [fr

  17. Reliability and validity of the Japanese version of the Resilience Scale and its short version

    Directory of Open Access Journals (Sweden)

    Kondo Maki

    2010-11-01

    Full Text Available Abstract Background The clinical relevance of resilience has received considerable attention in recent years. The aim of this study is to demonstrate the reliability and validity of the Japanese version of the Resilience Scale (RS and short version of the RS (RS-14. Findings The original English version of RS was translated to Japanese and the Japanese version was confirmed by back-translation. Participants were 430 nursing and university psychology students. The RS, Center for Epidemiologic Studies Depression Scale (CES-D, Rosenberg Self-Esteem Scale (RSES, Social Support Questionnaire (SSQ, Perceived Stress Scale (PSS, and Sheehan Disability Scale (SDS were administered. Internal consistency, convergent validity and factor loadings were assessed at initial assessment. Test-retest reliability was assessed using data collected from 107 students at 3 months after baseline. Mean score on the RS was 111.19. Cronbach's alpha coefficients for the RS and RS-14 were 0.90 and 0.88, respectively. The test-retest correlation coefficients for the RS and RS-14 were 0.83 and 0.84, respectively. Both the RS and RS-14 were negatively correlated with the CES-D and SDS, and positively correlated with the RSES, SSQ and PSS (all p Conclusions This study demonstrates that the Japanese version of RS has psychometric properties with high degrees of internal consistency, high test-retest reliability, and relatively low concurrent validity. RS-14 was equivalent to the RS in internal consistency, test-retest reliability, and concurrent validity. Low scores on the RS, a positive correlation between the RS and perceived stress, and a relatively low correlation between the RS and depressive symptoms in this study suggest that validity of the Japanese version of the RS might be relatively low compared with the original English version.

  18. Global Historical Climatology Network - Monthly (GHCN-M), Version 2

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Please note, the temperature portion of this dataset has been superseded by a newer version. Users should not use this version except in rare cases (e.g., when...

  19. United States Climate Reference Network (USCRN) Processed Data (Version Superseded)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Please note, this dataset has been superseded by a newer version (see below). Users should not use this version except in rare cases (e.g., when reproducing previous...

  20. Gridded Species Distribution, Version 1: Global Amphibians Presence Grids

    Data.gov (United States)

    National Aeronautics and Space Administration — The Global Amphibians Presence Grids of the Gridded Species Distribution, Version 1 is a reclassified version of the original grids of amphibian species distribution...

  1. Integrated Global Radiosonde Archive (IGRA) - Monthly Means (Version Superseded)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Please note, this dataset has been superseded by a newer version (see below). Users should not use this version except in rare cases (e.g., when reproducing previous...

  2. Addressing the Language Description Deficit

    Directory of Open Access Journals (Sweden)

    M. Ali Bolgiin

    2010-01-01

    Full Text Available Well-described language features are key to successful teaching and learning, especially for achieving advanced levels of proficiency. Other measures, such as simply increasing the number of reading and listening passages in a language program alone are not enough to bring the student to a higher level in a given skill. In fact, even being present in the target culture does not suffice. Angelelli and Degueldre (2002 argue that at advanced levels, even spending time in a country where the language is spoken is not necessarily sufficient for learners: "They do not need just exposure; they need answers to questions and explanations that they can rarely get by simply being immersed in a language/ culture." Less commonly taught languages (LCTLs lack descriptions that have such answers and explanations (cf. Fotos, 2002. It is argued in this paper that corpuslinguistic analyses help to provide actual usage-based, rather than intuition-based, descriptions and explanations of language features. Such approach is illustrated through English and Turkish examples.

  3. Integrated Project Management System description

    International Nuclear Information System (INIS)

    1994-09-01

    The Integrated Program Management System (IPMS) Description is a ''working'' document that describes the work processes of the Uranium Mill Tailings Remedial Action Project Office (UMTRA) and IPMS Group. This document has undergone many revisions since the UMTRA Project began; this revision not only updates the work processes but more clearly explains the relationships between the Project Office, contractors, and other participants. The work process flow style has been revised to better describe Project work and the relationships of participants. For each work process, more background and guidance on ''why'' and ''what is expected'' is given. For example, a description of activity data sheets has been added in the work organization and the Project performance and reporting processes, as well as additional detail about the federal budget process and funding management and improved flow charts and explanations of cost and schedule management. A chapter has been added describing the Cost Reduction/Productivity Improvement Program. The Change Control Board (CCB) procedures (Appendix A) have been updated. Project critical issues meeting (PCIM) procedures have been added as Appendix B. Budget risk assessment meeting procedures have been added as Appendix C. These appendices are written to act as stand-alone documentation for each process. As the procedures are improved and updated, the documentation can be updated separately

  4. Thermodynamical description of excited nuclei

    International Nuclear Information System (INIS)

    Bonche, P.

    1989-01-01

    In heavy ion collisions it has been possible to obtain composite systems at rather high excitation energies corresponding to temperatures of several MeV. The theoretical studies of these systems are based on concepts borrowed from thermodynamics or statistical physics, such as the temperature. In these lectures, we present the concepts of statistical physics which are involved in the physics of heavy ion as they are produced nowadays in the laboratory and also during the final stage of a supernova collapse. We do not attempt to describe the reaction mechanisms which yield such nuclear systems nor their decay by evaporation or fragmentation. We shall only study their static properties. The content of these lectures is organized in four main sections. The first one gives the basic features of statistical physics and thermodynamics necessary to understand quantum mechanics at finite temperature. In the second one, we present a study of the liquid-gas phase transition in nuclear physics. A phenomenological approach of the stability of hot nuclei follows. The microscopic point of view is proposed in the third part. Starting from the basic concepts derived in the first part, it provides a description of excited or hot nuclei which confirms the qualitative results of the second part. Furthermore it gives a full description of most properties of these nuclei as a function of temperature. Finally in the last part, a microscopic derivation of the equation of state of nuclear matter is proposed to study the collapse of a supernova core

  5. A kernel version of spatial factor analysis

    DEFF Research Database (Denmark)

    Nielsen, Allan Aasbjerg

    2009-01-01

    Based on work by Pearson in 1901, Hotelling in 1933 introduced principal component analysis (PCA). PCA is often used for general feature generation and linear orthogonalization or compression by dimensionality reduction of correlated multivariate data, see Jolliffe for a comprehensive description...

  6. SAJP 570 correct version.indd

    African Journals Online (AJOL)

    2014-11-02

    Nov 2, 2014 ... Method. In this descriptive cross-sectional study, an audit questionnaire was submitted to all public sector mental health facilities. Norms ... To control for non- response bias, the data were cross-checked with assistant managers/nurse managers, and where discrepancies existed, the resident psychiatrist ...

  7. Archival Descriptions from the National Archives Catalog

    Data.gov (United States)

    National Archives and Records Administration — Archival Descriptions from the National Archives Catalog data set provides archival descriptions of the permanent holdings of the federal government in the custody...

  8. Progress Towards AIRS Science Team Version-7 at SRT

    Science.gov (United States)

    Susskind, Joel; Blaisdell, John; Iredell, Lena; Kouvaris, Louis

    2016-01-01

    The AIRS Science Team Version-6 retrieval algorithm is currently producing level-3 Climate Data Records (CDRs) from AIRS that have been proven useful to scientists in understanding climate processes. CDRs are gridded level-3 products which include all cases passing AIRS Climate QC. SRT has made significant further improvements to AIRS Version-6. At the last Science Team Meeting, we described results using SRT AIRS Version-6.22. SRT Version-6.22 is now an official build at JPL called 6.2.4. Version-6.22 results are significantly improved compared to Version-6, especially with regard to water vapor and ozone profiles. We have adapted AIRS Version-6.22 to run with CrIS/ATMS, at the Sounder SIPS which processed CrIS/ATMS data for August 2014. JPL AIRS Version-6.22 uses the Version-6 AIRS tuning coefficients. AIRS Version-6.22 has at least two limitations which must be improved before finalization of Version-7: Version-6.22 total O3 has spurious high values in the presence of Saharan dust over the ocean; and Version-6.22 retrieved upper stratospheric temperatures are very poor in polar winter. SRT Version-6.28 addresses the first concern. John Blaisdell ran the analog of AIRS Version-6.28 in his own sandbox at JPL for the 14th and 15th of every month in 2014 and all of July and October for 2014. AIRS Version-6.28a is hot off the presses and addresses the second concern.

  9. Detailed analysis of the Japanese version of the Rapid Dementia Screening Test, revised version.

    Science.gov (United States)

    Moriyama, Yasushi; Yoshino, Aihide; Muramatsu, Taro; Mimura, Masaru

    2017-11-01

    The number-transcoding task on the Japanese version of the Rapid Dementia Screening Test (RDST-J) requires mutual conversion between Arabic and Chinese numerals (209 to , 4054 to , to 681, to 2027). In this task, question and answer styles of Chinese numerals are written horizontally. We investigated the impact of changing the task so that Chinese numerals are written vertically. Subjects were 211 patients with very mild to severe Alzheimer's disease and 42 normal controls. Mini-Mental State Examination scores ranged from 26 to 12, and Clinical Dementia Rating scores ranged from 0.5 to 3. Scores of all four subtasks of the transcoding task significantly improved in the revised version compared with the original version. The sensitivity and specificity of total scores ≥9 on the RDST-J original and revised versions for discriminating between controls and subjects with Clinical Dementia Rating scores of 0.5 were 63.8% and 76.6% on the original and 60.1% and 85.8% on revised version. The revised RDST-J total score had low sensitivity and high specificity compared with the original RDST-J for discriminating subjects with Clinical Dementia Rating scores of 0.5 from controls. © 2017 Japanese Psychogeriatric Society.

  10. CLIPS 6.0 - C LANGUAGE INTEGRATED PRODUCTION SYSTEM, VERSION 6.0 (UNIX VERSION)

    Science.gov (United States)

    Donnell, B.

    1994-01-01

    COOL (that is, a rule can pattern match on objects created using COOL). CLIPS 6.0 provides the capability to define functions, overloaded functions, and global variables interactively. In addition, CLIPS can be embedded within procedural code, called as a subroutine, and integrated with languages such as C, FORTRAN and Ada. CLIPS can be easily extended by a user through the use of several well-defined protocols. CLIPS provides several delivery options for programs including the ability to generate stand alone executables or to load programs from text or binary files. CLIPS 6.0 provides support for the modular development and execution of knowledge bases with the defmodule construct. CLIPS modules allow a set of constructs to be grouped together such that explicit control can be maintained over restricting the access of the constructs by other modules. This type of control is similar to global and local scoping used in languages such as C or Ada. By restricting access to deftemplate and defclass constructs, modules can function as blackboards, permitting only certain facts and instances to be seen by other modules. Modules are also used by rules to provide execution control. The CRSV (Cross-Reference, Style, and Verification) utility included with previous version of CLIPS is no longer supported. The capabilities provided by this tool are now available directly within CLIPS 6.0 to aid in the development, debugging, and verification of large rule bases. COSMIC offers four distribution versions of CLIPS 6.0: UNIX (MSC-22433), VMS (MSC-22434), MACINTOSH (MSC-22429), and IBM PC (MSC-22430). Executable files, source code, utilities, documentation, and examples are included on the program media. All distribution versions include identical source code for the command line version of CLIPS 6.0. This source code should compile on any platform with an ANSI C compiler. Each distribution version of CLIPS 6.0, except that for the Macintosh platform, includes an executable for the

  11. CLIPS 6.0 - C LANGUAGE INTEGRATED PRODUCTION SYSTEM, VERSION 6.0 (MACINTOSH VERSION)

    Science.gov (United States)

    Riley, G.

    1994-01-01

    COOL (that is, a rule can pattern match on objects created using COOL). CLIPS 6.0 provides the capability to define functions, overloaded functions, and global variables interactively. In addition, CLIPS can be embedded within procedural code, called as a subroutine, and integrated with languages such as C, FORTRAN and Ada. CLIPS can be easily extended by a user through the use of several well-defined protocols. CLIPS provides several delivery options for programs including the ability to generate stand alone executables or to load programs from text or binary files. CLIPS 6.0 provides support for the modular development and execution of knowledge bases with the defmodule construct. CLIPS modules allow a set of constructs to be grouped together such that explicit control can be maintained over restricting the access of the constructs by other modules. This type of control is similar to global and local scoping used in languages such as C or Ada. By restricting access to deftemplate and defclass constructs, modules can function as blackboards, permitting only certain facts and instances to be seen by other modules. Modules are also used by rules to provide execution control. The CRSV (Cross-Reference, Style, and Verification) utility included with previous version of CLIPS is no longer supported. The capabilities provided by this tool are now available directly within CLIPS 6.0 to aid in the development, debugging, and verification of large rule bases. COSMIC offers four distribution versions of CLIPS 6.0: UNIX (MSC-22433), VMS (MSC-22434), MACINTOSH (MSC-22429), and IBM PC (MSC-22430). Executable files, source code, utilities, documentation, and examples are included on the program media. All distribution versions include identical source code for the command line version of CLIPS 6.0. This source code should compile on any platform with an ANSI C compiler. Each distribution version of CLIPS 6.0, except that for the Macintosh platform, includes an executable for the

  12. CLIPS 6.0 - C LANGUAGE INTEGRATED PRODUCTION SYSTEM, VERSION 6.0 (IBM PC VERSION)

    Science.gov (United States)

    Donnell, B.

    1994-01-01

    COOL (that is, a rule can pattern match on objects created using COOL). CLIPS 6.0 provides the capability to define functions, overloaded functions, and global variables interactively. In addition, CLIPS can be embedded within procedural code, called as a subroutine, and integrated with languages such as C, FORTRAN and Ada. CLIPS can be easily extended by a user through the use of several well-defined protocols. CLIPS provides several delivery options for programs including the ability to generate stand alone executables or to load programs from text or binary files. CLIPS 6.0 provides support for the modular development and execution of knowledge bases with the defmodule construct. CLIPS modules allow a set of constructs to be grouped together such that explicit control can be maintained over restricting the access of the constructs by other modules. This type of control is similar to global and local scoping used in languages such as C or Ada. By restricting access to deftemplate and defclass constructs, modules can function as blackboards, permitting only certain facts and instances to be seen by other modules. Modules are also used by rules to provide execution control. The CRSV (Cross-Reference, Style, and Verification) utility included with previous version of CLIPS is no longer supported. The capabilities provided by this tool are now available directly within CLIPS 6.0 to aid in the development, debugging, and verification of large rule bases. COSMIC offers four distribution versions of CLIPS 6.0: UNIX (MSC-22433), VMS (MSC-22434), MACINTOSH (MSC-22429), and IBM PC (MSC-22430). Executable files, source code, utilities, documentation, and examples are included on the program media. All distribution versions include identical source code for the command line version of CLIPS 6.0. This source code should compile on any platform with an ANSI C compiler. Each distribution version of CLIPS 6.0, except that for the Macintosh platform, includes an executable for the

  13. The KFA-Version of the high-energy transport code HETC and the generalized evaluation code SIMPEL

    International Nuclear Information System (INIS)

    Cloth, P.; Filges, D.; Sterzenbach, G.; Armstrong, T.W.; Colborn, B.L.

    1983-03-01

    This document describes the updates that have been made to the high-energy transport code HETC for use in the German spallation-neutron source project SNQ. Performance and purpose of the subsidiary code SIMPEL that has been written for general analysis of the HETC output are also described. In addition means of coupling to low energy transport programs, such as the Monte-Carlo code MORSE is provided. As complete input descriptions for HETC and SIMPEL are given together with a sample problem, this document can serve as a user's manual for these two codes. The document is also an answer to the demand that has been issued by a greater community of HETC users on the ICANS-IV meeting, Oct 20-24 1980, Tsukuba-gun, Japan for a complete description of at least one single version of HETC among the many different versions that exist. (orig.)

  14. Spanish Version of Actinic Keratosis Quality of Life Questionnaire (AKQoL)

    DEFF Research Database (Denmark)

    Alarcon, I.; Vinding, G. R.; Christensen, K. B.

    2017-01-01

    into Spanish and quantify the impairment caused by AKs in Spanish patients. METHODS: The AKQoL was translated. Then 15 patients with AKs were interviewed to ensure cultural adaption before it was tested in one hundred patients with AK lesions at the Melanoma Unit of Hospital Clinic in Barcelona. RESULTS.......98. CONCLUSION: The presented data support the AKQoL Spanish version as a valid and reliable HRQoL questionnaire for the description of AK-related QoL, and may provide a method for comparison of AK specific QoL between different cultures and countries. This article is protected by copyright. All rights reserved....

  15. TERS v2.0: An improved version of TERS

    Science.gov (United States)

    Nath, S.

    2009-11-01

    program (maximum 5 ×105). The parameters in input line number 4 are new in this version. If the target is backed by a carbon foil of thickness 125 μg/cm2, the input line would look like "6 12 0.125". If the target is self-supporting, i.e. there is no backing, value of the last parameter (thickness) should be zero. However, the first two parameters must not be left blank or have 0 values. The input line would look like "6 12 0.0" in this case. A new function ThinFoil() has been introduced in the program ters_tra2.c. A thin foil can be inserted anywhere along the path of the residues by calling this function using the following syntax: Status = ThinFoil(argument list); if (Status == 0) continue; The function is particularly useful to place a residue charge-reset foil (usually made of carbon) after the target and is described in Table 1.Name of the functionJob of the functionList of argumentsDescription of argumentsThinFoil()To calculate ion energy loss in a thin foilint arg1, int arg2, int arg3arg1 = atomic number of the foil material, arg2 = mass number of the foil material, arg3 = thickness of the foil [mg/cm2] There is a minor change in the input file ters_tra2.inp. Following is the modified list of input parameters in this file with explanation. Residue atomic number and mass number. Energy [MeV], mass no. and charge state of the reference particle. Number of events i.e. trajectories to be calculated. Program/input files which have been modified in this version are suffixed by "2" in their names (before the extension), e.g., ters_pti.c has been renamed ters_pti2.c. The complete list of files included in the distributed code can be viewed in the readme file. Restrictions: The present version of the code is applicable to complete fusion reactions only. Calculation of transmission efficiency has been illustrated with a specific recoil separator, viz. the Heavy Ion Reaction Analyzer (HIRA) [4,5], at IUAC. One has to make necessary changes in the code, while performing

  16. The anchor integration model: A descriptive model of anchoring effects.

    Science.gov (United States)

    Turner, Brandon M; Schley, Dan R

    2016-11-01

    Few experimental effects in the psychology of judgment and decision making have been studied as meticulously as the anchoring effect. Although the existing literature provides considerable insight into the psychological processes underlying anchoring effects, extant theories up to this point have only generated qualitative predictions. While these theories have been productive in advancing our understanding of the underlying anchoring process, they leave much to be desired in the interpretation of specific anchoring effects. In this article, we introduce the Anchor Integration Model (AIM) as a descriptive tool for the measurement and quantification of anchoring effects. We develop two versions the model: one suitable for assessing between-participant anchoring effects, and another for assessing individual differences in anchoring effects. We then fit each model to data from two experiments, and demonstrate the model's utility in describing anchoring effects. Copyright © 2016 Elsevier Inc. All rights reserved.

  17. The Gaia Framework: Version Support In Web Based Open Hypermedia

    DEFF Research Database (Denmark)

    Kejser, Thomas; Grønbæk, Kaj

    2003-01-01

    The GAIA framework prototype, described herein, explores the possibilities and problems that arise when combining versioning and open hypermedia paradigms. It will be argued that it - by adding versioning as a separate service in the hypermedia architecture - is possible to build consistent versi...... architectures for future versioned hypermedia frameworks....

  18. Concept of versions of electronic documents in databases

    OpenAIRE

    Myshchyshyn, Vitalii; Zhezhnych, Pavlo

    2013-01-01

    The use of computer technologies for work with documents leads to appearance of such notion as electronic document. There can be entered the notion “Electronic document version” because of time properties in database. Version is a depending from time value. Electronic document version notion is methods of saving and display the part of electronic document version data in database.

  19. 77 FR 24594 - Version 4 Critical Infrastructure Protection Reliability Standards

    Science.gov (United States)

    2012-04-25

    ... Version 4 CIP Reliability Standards adequately protect control centers and control systems (i.e., control systems not housed in control centers). G&T Cooperatives believe that Version 4 goes too far, while SPP RE... Associations acknowledge the NOPR's concern that CIP Version 4 does not protect some control centers/common...

  20. 76 FR 58730 - Version 4 Critical Infrastructure Protection Reliability Standards

    Science.gov (United States)

    2011-09-22

    ... following ``Version 3'' CIP Standards: CIP-003-3 (Security Management Controls); CIP-004-3 (Personnel... control center; or (3) be dial-up accessible. In the proposed version, in the context of generating units... that the Version 4 CIP Standards would result in the identification of 532 control centers as Critical...

  1. 78 FR 72755 - Version 5 Critical Infrastructure Protection Reliability Standards

    Science.gov (United States)

    2013-12-03

    ... Reliability Standards. The CIP version 5 Standards adopt new cyber security controls and extend the scope of... category. The CIP version 5 Standards also include 12 requirements with new cyber security controls, which... version 5 Standards do not require specific controls for Low Impact assets nor do they contain objective...

  2. 78 FR 24107 - Version 5 Critical Infrastructure Protection Reliability Standards

    Science.gov (United States)

    2013-04-24

    ..., the proposed CIP version 5 Standards include twelve requirements with new cyber security controls. The... CIP version 5 Standards adopt new cyber security controls that are intended to safeguard physical and... Cyber Systems. 35. With regard to controls, the proposed CIP version 5 Standards include twelve...

  3. SNF AGING SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    L.L. Swanson

    2005-04-06

    The purpose of this system description document (SDD) is to establish requirements that drive the design of the spent nuclear fuel (SNF) aging system and associated bases, which will allow the design effort to proceed. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD follows the design with regard to the description of the system. The description provided in the SDD reflects the current results of the design process. Throughout this SDD, the term aging cask applies to vertical site-specific casks and to horizontal aging modules. The term overpack is a vertical site-specific cask that contains a dual-purpose canister (DPC) or a disposable canister. Functional and operational requirements applicable to this system were obtained from ''Project Functional and Operational Requirements'' (F&OR) (Curry 2004 [DIRS 170557]). Other requirements that support the design process were taken from documents such as ''Project Design Criteria Document'' (PDC) (BSC 2004 [DES 171599]), ''Site Fire Hazards Analyses'' (BSC 2005 [DIRS 172174]), and ''Nuclear Safety Design Bases for License Application'' (BSC 2005 [DIRS 171512]). The documents address requirements in the ''Project Requirements Document'' (PRD) (Canori and Leitner 2003 [DIRS 166275]). This SDD includes several appendices. Appendix A is a Glossary; Appendix B is a list of key system charts

  4. Fuzzy Versions of Epistemic and Deontic Logic

    Science.gov (United States)

    Gounder, Ramasamy S.; Esterline, Albert C.

    1998-01-01

    Epistemic and deontic logics are modal logics, respectively, of knowledge and of the normative concepts of obligation, permission, and prohibition. Epistemic logic is useful in formalizing systems of communicating processes and knowledge and belief in AI (Artificial Intelligence). Deontic logic is useful in computer science wherever we must distinguish between actual and ideal behavior, as in fault tolerance and database integrity constraints. We here discuss fuzzy versions of these logics. In the crisp versions, various axioms correspond to various properties of the structures used in defining the semantics of the logics. Thus, any axiomatic theory will be characterized not only by its axioms but also by the set of properties holding of the corresponding semantic structures. Fuzzy logic does not proceed with axiomatic systems, but fuzzy versions of the semantic properties exist and can be shown to correspond to some of the axioms for the crisp systems in special ways that support dependency networks among assertions in a modal domain. This in turn allows one to implement truth maintenance systems. For the technical development of epistemic logic, and for that of deontic logic. To our knowledge, we are the first to address fuzzy epistemic and fuzzy deontic logic explicitly and to consider the different systems and semantic properties available. We give the syntax and semantics of epistemic logic and discuss the correspondence between axioms of epistemic logic and properties of semantic structures. The same topics are covered for deontic logic. Fuzzy epistemic and fuzzy deontic logic discusses the relationship between axioms and semantic properties for these logics. Our results can be exploited in truth maintenance systems.

  5. The transverse acetabular ligament: optimizing version.

    Science.gov (United States)

    Beverland, David

    2010-09-07

    In total hip arthroplasty (THA), excessive retroversion is associated with posterior instability, anterior impingement, and resultant groin pain. Excessive anteversion can lead to anterior instability and posterior impingement. The transverse acetabular ligament straddles the inferior limit of the bony acetabulum. It is a strong load-bearing structure and, in the normal hip, in association with the labrum, provides part of the load-bearing surface for the femoral head. It is our hypothesis that the transverse acetabular ligament defines normal version for the acetabulum. In Belfast, we found that using the transverse acetabular ligament helped reduce our primary dislocation rate from 3.7% to 1%. The key is good intraoperative exposure. A grading of 1 to 4 was based on 1000 consecutive cases: (1) normal transverse acetabular ligament easily visible on exposure of the acetabulum, 49%; (2) covered by soft tissue, 35.1%--cleared by blunt dissection; (3) covered by osteophytes, 15.6%--cleared using an acetabular reamer; (4) no transverse acetabular ligament identified, 0.3%. As can be seen, the transverse acetabular ligament is only immediately visible in 49% of cases. In the other 51%, soft tissue or bone must be cleared to define the ligament. The advantages of the transverse acetabular ligament are many. It is independent of patient positioning. The cup version can be individualized by the patient. The surgeon can avoid estimating version angle of 15° to 20° intraoperatively. It is easy to teach and consistently present. It is valuable in minimally invasive surgery. Using the transverse acetabular ligament provides an acceptable dislocation rate with the posterior approach. If the cup is cradled by the transverse acetabular ligament, it helps restore acetabular joint center. However, the transverse acetabular ligament does not help with inclination. We recommend 35° of operative inclination when using the posterior approach. Copyright 2010, SLACK Incorporated.

  6. WIMSD4 - Version 100 and cataloged procedure

    International Nuclear Information System (INIS)

    Taubman, C.J.; Lawrence, J.H.

    1981-02-01

    A new version of WMSD4 has been produced on the IBM 3033 computer at Harwell. The program has been completely recompiled using the enhanced H-extended compiler and several modifications have been made. Also the line printer output has been redirected from dataset reference number 7 to dataset reference number 6 and the working space previously identified by dataset reference number 6 has been reidentified by a new dataset reference number 12. The catalogued procedure has been rewritten to deal with the dataset changes. (author)

  7. Python pocket reference, version 2.4

    CERN Document Server

    Lutz, Mark

    2005-01-01

    Python is optimized for quality, productivity, portability, and integration. Hundreds of thousands of Python developers around the world rely on Python for general-purpose tasks, Internet scripting, systems programming, user interfaces, and product customization. Available on all major computing platforms, including commercial versions of Unix, Linux, Windows, and Mac OS X, Python is portable, powerful and remarkable easy to use. With its convenient, quick-reference format, Python Pocket Reference, 3rd Edition is the perfect on-the-job reference. More importantly, it's now been refreshed

  8. UQTk version 2.0 user manual

    Energy Technology Data Exchange (ETDEWEB)

    Debusschere, Bert J. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Sargsyan, Khachik [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Safta, Cosmin [Sandia National Lab. (SNL-CA), Livermore, CA (United States)

    2013-10-01

    The UQ Toolkit (UQTk) is a collection of libraries and tools for the quantification of uncertainty in numerical model predictions. Version 2.0 ffers intrusive and non-intrusive methods for propagating input uncertainties through computational models, tools for sensitivity analysis, methods for sparse surrogate construction, and Bayesian inference tools for inferring parameters from experimental data. This manual discusses the download and installation process for UQTk, provides pointers to the UQ methods used in the toolkit, and describes some of the examples provided with the toolkit.

  9. The EPICS process variable Gateway Version 2

    International Nuclear Information System (INIS)

    Evans, K.

    2005-01-01

    The EPICS Process Variable Gateway is both a Channel Access Server and Channel Access Client that provides a means for many clients, typically on different subnets, to access a process variable while making only one connection to the server that owns the process variable. It also provides additional access security beyond that implemented on the server. It thus protects critical servers while providing suitably restricted access to needed process variables. The original version of the Gateway worked with EPICS Base 3.13 but required a special version, since the changes necessary for its operation were never incorporated into EPICS Base. Version 2 works with any standard EPICS Base 3.14.6 or later and has many improvements in both performance and features over the older version. The Gateway is now used at many institutions and has become a stable, high-performance application. It is capable of handling tens of thousands of process variables with hundreds of thousands of events per second. It has run for over three months in a production environment without having to be restarted. It has many internal process variables that can be used to monitor its state using standard EPICS client tools, such as MEDM and StripTool. Other internal process variables can be used to stop the Gateway, make several kinds of reports, or change the access security without stopping the Gateway. It can even be started on remote workstations from MEDM by using a Secure Shell script. This paper will describe the new Gateway and how it is used. The Gateway is both a server (like an EPICS Input/Output Controller (IOC)) and a client (like the EPICS Motif Editor and Display Manager (MEDM), StripTool, and others). Clients connect to the server side, and the client side connects to IOCs and other servers, possibly other Gateways. See Fig. 1. There are perhaps three principal reasons for using the Gateway: (1) it allows many clients to access a process variable while making only one connection to

  10. Fiscal impacts model documentation. Version 1. 0

    Energy Technology Data Exchange (ETDEWEB)

    Beck, S.L.; Scott, M.J.

    1986-05-01

    The Fiscal Impacts (FI) Model, Version 1.0 was developed under Pacific Northwest Laboratory's Monitored Retrievable Storage (MRS) Program to aid in development of the MRS Reference Site Environmental Document (PNL 5476). It computes estimates of 182 fiscal items for state and local government jurisdictions, using input data from the US Census Bureau's 1981 Survey of Governments and local population forecasts. The model can be adapted for any county or group of counties in the United States.

  11. Reliability and validity of the Japanese version of the Resilience Scale and its short version.

    Science.gov (United States)

    Nishi, Daisuke; Uehara, Ritei; Kondo, Maki; Matsuoka, Yutaka

    2010-11-17

    The clinical relevance of resilience has received considerable attention in recent years. The aim of this study is to demonstrate the reliability and validity of the Japanese version of the Resilience Scale (RS) and short version of the RS (RS-14). The original English version of RS was translated to Japanese and the Japanese version was confirmed by back-translation. Participants were 430 nursing and university psychology students. The RS, Center for Epidemiologic Studies Depression Scale (CES-D), Rosenberg Self-Esteem Scale (RSES), Social Support Questionnaire (SSQ), Perceived Stress Scale (PSS), and Sheehan Disability Scale (SDS) were administered. Internal consistency, convergent validity and factor loadings were assessed at initial assessment. Test-retest reliability was assessed using data collected from 107 students at 3 months after baseline. Mean score on the RS was 111.19. Cronbach's alpha coefficients for the RS and RS-14 were 0.90 and 0.88, respectively. The test-retest correlation coefficients for the RS and RS-14 were 0.83 and 0.84, respectively. Both the RS and RS-14 were negatively correlated with the CES-D and SDS, and positively correlated with the RSES, SSQ and PSS (all p validity. RS-14 was equivalent to the RS in internal consistency, test-retest reliability, and concurrent validity. Low scores on the RS, a positive correlation between the RS and perceived stress, and a relatively low correlation between the RS and depressive symptoms in this study suggest that validity of the Japanese version of the RS might be relatively low compared with the original English version.

  12. Theory buried under heavy description

    Directory of Open Access Journals (Sweden)

    Vivian B. Martin Ph.D.

    2010-12-01

    Full Text Available In journalism when a reporter puts the main news or point of the story deep down in the text, we say she’s buried the lead, the lead being the main point of the story and usually the first paragraph. In Children in Genocide: extreme traumatization and affect regulation, psychoanalyst Suzanne Kaplan buries her theory. Her study of the after effects of trauma among Holocaust survivors who were children during their persecution and survivors of atrocities during the Rwandan atrocities of the 1990s, is filled with highly descriptive material from the many interviews that serve as data. An interesting grounded theory is peeking out from under all the disciplinary discourse and historical background one must read through to get to what grounded theory readers will consider the juicy parts: concepts on affect regulation in trauma survivors.

  13. Integrated Project Management System description

    International Nuclear Information System (INIS)

    1987-03-01

    The Uranium Mill Tailings Remedial Action (UMTRA) Project is a Department of Energy (DOE) designated Major System Acquisition (MSA). To execute and manage the Project mission successfully and to comply with the MSA requirements, the UMTRA Project Office (''Project Office'') has implemented and operates an Integrated Project Management System (IPMS). The Project Office is assisted by the Technical Assistance Contractor's (TAC) Project Integration and Control (PIC) Group in system operation. Each participant, in turn, provides critical input to system operation and reporting requirements. The IPMS provides a uniform structured approach for integrating the work of Project participants. It serves as a tool for planning and control, workload management, performance measurement, and specialized reporting within a standardized format. This system description presents the guidance for its operation. Appendices 1 and 2 contain definitions of commonly used terms and abbreviations and acronyms, respectively. 17 figs., 5 tabs

  14. Reversible gates and circuits descriptions

    Science.gov (United States)

    Gracki, Krzystof

    2017-08-01

    This paper presents basic methods of reversible circuit description. To design reversible circuit a set of gates has to be chosen. Most popular libraries are composed of three types of gates so called CNT gates (Control, NOT and Toffoli). The gate indexing method presented in this paper is based on the CNT gates set. It introduces a uniform indexing of the gates used during synthesis process of reversible circuits. The paper is organized as follows. Section 1 recalls basic concepts of reversible logic. In Section 2 and 3 a graphical representation of the reversible gates and circuits is described. Section 4 describes proposed uniform NCT gates indexing. The presented gate indexing method provides gate numbering scheme independent of lines number of the designed circuit. The solution for a circuit consisting of smaller number of lines is a subset of solution for a larger circuit.

  15. Relativistic description of deformed nuclei

    International Nuclear Information System (INIS)

    Price, C.E.

    1988-01-01

    The author has shown that relativistic Hartree calculations using parameters that have been fit to the properties of nuclear matter can provide a good description of both spherical and axially deformed nuclei. The quantitative agreement with experiment is equivalent to that which was obtained in non-relativistic calculations using Skyrme interactions. The equilibrium deformation is strongly correlated with the size of the spin-orbit splitting, and that parameter sets which give roughly the correct value for this splitting provide the best agreement with the quadrupole moments in the s-d shell. Finally, for closed shell +/- 1 nuclei, it was shown that the self-consistent calculations are able to reproduce the experimental magnetic moments. This was not possible in relativistic calculations which include only the effects of the valence orbital

  16. Ensuring consistent reporting of clinical pharmacy services to enhance reproducibility in practice: an improved version of DEPICT.

    Science.gov (United States)

    Rotta, Inajara; Salgado, Teresa M; Felix, Daniel C; Souza, Thais T; Correr, Cassyano J; Fernandez-Llimos, Fernando

    2015-08-01

    DEPICT (Descriptive Elements of Pharmacist Intervention Characterization Tool) was created in response to the frequently reported issue of poor intervention description across studies assessing the impact of clinical pharmacy activities. The aim of this study was to create an improved version of DEPICT (i.e. DEPICT 2) to better characterize clinical pharmacy services in order to ensure consistent reporting, therefore enhancing reproducibility of interventions in practice. A qualitative approach through a thematic content analysis was performed to identify components of pharmacist interventions described in 269 randomized controlled trials. A preliminary version of DEPICT 2 was applied independently by two authors to a random sample of 85 of the 269 RCTs and reliability determined by the prevalence-adjusted bias-adjusted kappa (PABAK) or the intraclass correlation coefficient (ICC). The final version of DEPICT 2 was compared against DEPICT 1. The final version of DEPICT 2 comprised 146 items and 11 domains. The inter-rater agreement analysis showed that DEPICT presented good to optimal reproducibility, with a mean PABAK value of 0.87 (95% CI 0.85-0.89) and a mean ICC value of 0.88 (95% CI 0.62-1.14). The mean difference between items checked in the two versions (DEPICT 2 - DEPICT 1) was 10.58 (95% CI 9.55-11.61), meaning that approximately 11 more components were identified in the new version of DEPICT. DEPICT 2 is a reliable tool to characterize components of clinical pharmacy services, which should be used to ensure consistent reporting of interventions to allow their reproducibility in practice. © 2015 John Wiley & Sons, Ltd.

  17. Documentation to the NCES Common Core of Data Public Elementary/Secondary School Universe Survey: School Year 2011-12. Provisional Version 1a. NCES 2014-100

    Science.gov (United States)

    Keaton, Patrick

    2013-01-01

    The documentation for this provisional version 1a file of the National Center for Education Statistics' (NCES) Common Core of Data (CCD) Public Elementary/Secondary School Universe Survey for SY 2011-12, contains a brief description of the data collection, along with information required to understand and access the data file. The SY 2011-12…

  18. Documentation to the NCES Common Core of Data Local Education Agency Universe Survey: School Year 2011-12. Provisional Version 1a. NCES 2014-035

    Science.gov (United States)

    Keaton, Patrick

    2014-01-01

    This documentation is for the provisional version 1a file of the National Center for Education Statistics' (NCES) Common Core of Data (CCD) Local Education Agency (LEA) Universe Survey for SY 2011-12. It contains a brief description of the data collection, along with information required to understand and access the data file. The CCD is a…

  19. The predictive information obtained by testing multiple software versions

    Science.gov (United States)

    Lee, Larry D.

    1987-01-01

    Multiversion programming is a redundancy approach to developing highly reliable software. In applications of this method, two or more versions of a program are developed independently by different programmers and the versions are combined to form a redundant system. One variation of this approach consists of developing a set of n program versions and testing the versions to predict the failure probability of a particular program or a system formed from a subset of the programs. The precision that might be obtained, and also the effect of programmer variability if predictions are made over repetitions of the process of generating different program versions, are examined.

  20. An Introduction to Version Control Using GitHub Desktop

    Directory of Open Access Journals (Sweden)

    Daniel van Strien

    2016-06-01

    Full Text Available In this lesson you will be introduced to the basics of version control, understand why it is useful and implement basic version control for a plain text document using GitHub Desktop. By the end of this lesson you should understand: * what version control is and why it can be useful * the differences between Git and GitHub * how to implement version control using ‘GitHub Desktop,’ a Graphical User Interface for GitHub * be aware of other resources that will help you implement version control in your academic writing

  1. Modeling report of DYMOND code (DUPIC version)

    Energy Technology Data Exchange (ETDEWEB)

    Park, Joo Hwan [KAERI, Taejon (Korea, Republic of); Yacout, Abdellatif M. [Argonne National Laboratory, Ilinois (United States)

    2003-04-01

    The DYMOND code employs the ITHINK dynamic modeling platform to assess the 100-year dynamic evolution scenarios for postulated global nuclear energy parks. Firstly, DYMOND code has been developed by ANL(Argonne National Laboratory) to perform the fuel cycle analysis of LWR once-through and LWR-FBR mixed plant. Since the extensive application of DYMOND code has been requested, the first version of DYMOND has been modified to adapt the DUPIC, MSR and RTF fuel cycle. DYMOND code is composed of three parts; the source language platform, input supply and output. But those platforms are not clearly distinguished. This report described all the equations which were modeled in the modified DYMOND code (which is called as DYMOND-DUPIC version). It divided into five parts;Part A deals model in reactor history which is included amount of the requested fuels and spent fuels. Part B aims to describe model of fuel cycle about fuel flow from the beginning to the end of fuel cycle. Part C is for model in re-processing which is included recovery of burned uranium, plutonium, minor actinide and fission product as well as the amount of spent fuels in storage and disposal. Part D is for model in other fuel cycle which is considered the thorium fuel cycle for MSR and RTF reactor. Part E is for model in economics. This part gives all the information of cost such as uranium mining cost, reactor operating cost, fuel cost etc.

  2. Frost Multidimensional Perfectionism Scale: the portuguese version

    Directory of Open Access Journals (Sweden)

    Ana Paula Monteiro Amaral

    2013-01-01

    Full Text Available BACKGROUND: The Frost Multidimensional Perfectionism Scale is one of the most world widely used measures of perfectionism. OBJECTIVE: To analyze the psychometric properties of the Portuguese version of the Frost Multidimensional Perfectionism Scale. METHODS: Two hundred and seventeen (178 females students from two Portuguese Universities filled in the scale, and a subgroup (n = 166 completed a retest with a four weeks interval. RESULTS: The scale reliability was good (Cronbach alpha = .857. Corrected item-total correlations ranged from .019 to .548. The scale test-retest reliability suggested a good temporal stability with a test-retest correlation of .765. A principal component analysis with Varimax rotation was performed and based on the Scree plot, two robust factorial structures were found (four and six factors. The principal component analyses, using Monte Carlo PCA for parallel analyses confirmed the six factor solution. The concurrent validity with Hewitt and Flett MPS was high, as well as the discriminant validity of positive and negative affect (Profile of Mood Stats-POMS. DISCUSSION: The two factorial structures (of four and six dimensions of the Portuguese version of Frost Multidimensional Perfectionism Scale replicate the results from different authors, with different samples and cultures. This suggests this scale is a robust instrument to assess perfectionism, in several clinical and research settings as well as in transcultural studies.

  3. The health care and life sciences community profile for dataset descriptions

    Directory of Open Access Journals (Sweden)

    Michel Dumontier

    2016-08-01

    Full Text Available Access to consistent, high-quality metadata is critical to finding, understanding, and reusing scientific data. However, while there are many relevant vocabularies for the annotation of a dataset, none sufficiently captures all the necessary metadata. This prevents uniform indexing and querying of dataset repositories. Towards providing a practical guide for producing a high quality description of biomedical datasets, the W3C Semantic Web for Health Care and the Life Sciences Interest Group (HCLSIG identified Resource Description Framework (RDF vocabularies that could be used to specify common metadata elements and their value sets. The resulting guideline covers elements of description, identification, attribution, versioning, provenance, and content summarization. This guideline reuses existing vocabularies, and is intended to meet key functional requirements including indexing, discovery, exchange, query, and retrieval of datasets, thereby enabling the publication of FAIR data. The resulting metadata profile is generic and could be used by other domains with an interest in providing machine readable descriptions of versioned datasets.

  4. Psychometric evaluation of the borderline personality disorder severity index-IV-adolescent version and parent version

    NARCIS (Netherlands)

    Schuppert, H.M.; Bloo, J.; Minderaa, R.B.; Emmelkamp, P.M.G.; Nauta, M.H.

    2012-01-01

    The Borderline Personality Disorder Severity Index—IV—adolescent and parent versions (BPDSI-IV-ado/p) are DSM-IV based semi-structured interviews for the assessment of the severity of symptoms of borderline personality disorder (BPD) in adolescents. The present study evaluates the psychometric

  5. Psychometric evaluation of the Borderline Personality Disorder Severity Index IV - adolescent version and parent version

    NARCIS (Netherlands)

    Schuppert, H.M.; Bloo, J.; Minderaa, R.B.; Emmelkamp, P.M.G.; Nauta, M.H.

    The Borderline Personality Disorder Severity Index-IV-adolescent and parent versions (BPDSI-IV-ado/p) are DSM-IV based semi-structured interviews for the assessment of the severity of symptoms of borderline personality disorder (BPD) in adolescents. The present study evaluates the psychometric

  6. A psychometric evaluation of the Chinese version of the nursing home survey on patient safety culture.

    Science.gov (United States)

    Lin, Shu-Yuan; Tseng, Wei Ting; Hsu, Miao-Ju; Chiang, Hui-Ying; Tseng, Hui-Chen

    2017-12-01

    To test the psychometric properties of the Chinese version of the Nursing Home Survey on Patient Safety Culture scale among staff in long-term care facilities. The Nursing Home Survey on Patient Safety Culture scale is a standard tool for safety culture assessment in nursing homes. Extending its application to different types of long-term care facilities and varied ethnic populations is worth pursuing. A national random survey. A total of 306 managers and staff completed the Chinese version of the Nursing Home Survey on Patient Safety Culture scale among 30 long-term care facilities in Taiwan. Content validity and construct validity were tested by content validity index (CVI) and principal axis factor analysis (PAF) with Promax rotation. Concurrent validity was tested through correlations between the scale and two overall rating items. Reliability was computed by intraclass correlation coefficient and Cronbach's α coefficients. Statistical analyses such as descriptive, Pearson's and Spearman's rho correlations and PAF were completed. Scale-level and item-level CVIs (0.91-0.98) of the Chinese version of the Nursing Home Survey on Patient Safety Culture scale were satisfactory. Four-factor construct and merged item composition differed from the Nursing Home Survey on Patient Safety Culture scale, and it accounted for 53% of variance. Concurrent validity was evident by existing positive correlations between the scale and two overall ratings of resident safety. Cronbach's α coefficients of the subscales and the Chinese version of the Nursing Home Survey on Patient Safety Culture scale ranged from .76-.94. The Chinese version of the Nursing Home Survey on Patient Safety Culture scale identified essential dimensions to reflect the important features of a patient safety culture in long-term care facilities. The researchers introduced the Chinese version of the Nursing Home Survey on Patient Safety Culture for safety culture assessment in long-term care facilities, but

  7. Descriptive markup languages and the development of digital humanities

    Directory of Open Access Journals (Sweden)

    Boris Bosančić

    2012-11-01

    Full Text Available The paper discusses the role of descriptive markup languages in the development of digital humanities, a new research discipline that is part of social sciences and humanities, which focuses on the use of computers in research. A chronological review of the development of digital humanities, and then descriptive markup languages is exposed, through several developmental stages. It is shown that the development of digital humanities since the mid-1980s and the appearance of SGML, markup language that was the foundation of TEI, a key standard for the encoding and exchange of humanities texts in the digital environment, is inseparable from the development of markup languages. Special attention is dedicated to the presentation of the Text Encoding Initiative – TEI development, a key organization that developed the titled standard, both from organizational and markup perspectives. By this time, TEI standard is published in five versions, and during 2000s SGML is replaced by XML markup language. Key words: markup languages, digital humanities, text encoding, TEI, SGML, XML

  8. THE SHEFFIELD ALCOHOL POLICY MODEL - A MATHEMATICAL DESCRIPTION.

    Science.gov (United States)

    Brennan, Alan; Meier, Petra; Purshouse, Robin; Rafia, Rachid; Meng, Yang; Hill-Macmanus, Daniel; Angus, Colin; Holmes, John

    2014-09-30

    This methodology paper sets out a mathematical description of the Sheffield Alcohol Policy Model version 2.0, a model to evaluate public health strategies for alcohol harm reduction in the UK. Policies that can be appraised include a minimum price per unit of alcohol, restrictions on price discounting, and broader public health measures. The model estimates the impact on consumers, health services, crime, employers, retailers and government tax revenues. The synthesis of public and commercial data sources to inform the model structure is described. A detailed algebraic description of the model is provided. This involves quantifying baseline levels of alcohol purchasing and consumption by age and gender subgroups, estimating the impact of policies on consumption, for example, using evidence on price elasticities of demand for alcohol, quantification of risk functions relating alcohol consumption to harms including 47 health conditions, crimes, absenteeism and unemployment, and finally monetary valuation of the consequences. The results framework, shown for a minimum price per unit of alcohol, has been used to provide policy appraisals for the UK government policy-makers. In discussion and online appendix, we explore issues around valuation and scope, limitations of evidence/data, how the framework can be adapted to other countries and decisions, and ongoing plans for further development. © 2014 The Authors. Health Economics published by John Wiley & Sons Ltd. © 2014 The Authors. Health Economics published by John Wiley & Sons Ltd.

  9. Development of a Chinese version of the Oswestry Disability Index version 2.1.

    Science.gov (United States)

    Lue, Yi-Jing; Hsieh, Ching-Lin; Huang, Mao-Hsiung; Lin, Gau-Tyan; Lu, Yen-Mou

    2008-10-01

    Cross-cultural adaptation and cross-sectional psychometric testing in a convenience sample of patients with low back pain. To translate and culturally adapt the Oswestry Disability Index version 2.1 (ODI 2.1) into a Mandarin Chinese version and to assess its reliability and validity. The Chinese ODI 2.1 has not been developed and validated. The ODI 2.1 was translated and culturally adapted to the Chinese version. The validity of the translated Chinese version was assessed by examining the relationship between the ODI and other well-known measures. Test-retest reliability was examined in 52 of these patients, who completed a second questionnaire within 1 week. Internal consistency of the ODI 2.1 was excellent with Cronbach's alpha = 0.903. The intraclass correlation coefficient of test-retest reliability was 0.89. The minimal detectable change was 12.8. The convergent validity of the Chinese ODI is supported by its high correlation with other physical functional status measures (Roland Morris Disability Questionnaire and SF-36 physical functioning subscale, r = 0.76 and -0.75, respectively), and moderate correlation with other measures (Visual Analogue Scale, r = 0.68) and certain SF-36 subscales (role-physical, bodily pain, and social functioning, r range: -0.49 to -0.57). As expected, the ODI was least correlated with nonfunctional measures (SF-36 mental subscale and role-emotional subscale, r = -0.25 and -0.33, respectively). The results of this study indicate that the Chinese version of the ODI 2.1 is a reliable and valid instrument for the measurement of functional status in patients with low back pain.

  10. XML Translator for Interface Descriptions

    Science.gov (United States)

    Boroson, Elizabeth R.

    2009-01-01

    A computer program defines an XML schema for specifying the interface to a generic FPGA from the perspective of software that will interact with the device. This XML interface description is then translated into header files for C, Verilog, and VHDL. User interface definition input is checked via both the provided XML schema and the translator module to ensure consistency and accuracy. Currently, programming used on both sides of an interface is inconsistent. This makes it hard to find and fix errors. By using a common schema, both sides are forced to use the same structure by using the same framework and toolset. This makes for easy identification of problems, which leads to the ability to formulate a solution. The toolset contains constants that allow a programmer to use each register, and to access each field in the register. Once programming is complete, the translator is run as part of the make process, which ensures that whenever an interface is changed, all of the code that uses the header files describing it is recompiled.

  11. Probabilistic description of traffic flow

    International Nuclear Information System (INIS)

    Mahnke, R.; Kaupuzs, J.; Lubashevsky, I.

    2005-01-01

    A stochastic description of traffic flow, called probabilistic traffic flow theory, is developed. The general master equation is applied to relatively simple models to describe the formation and dissolution of traffic congestions. Our approach is mainly based on spatially homogeneous systems like periodically closed circular rings without on- and off-ramps. We consider a stochastic one-step process of growth or shrinkage of a car cluster (jam). As generalization we discuss the coexistence of several car clusters of different sizes. The basic problem is to find a physically motivated ansatz for the transition rates of the attachment and detachment of individual cars to a car cluster consistent with the empirical observations in real traffic. The emphasis is put on the analogy with first-order phase transitions and nucleation phenomena in physical systems like supersaturated vapour. The results are summarized in the flux-density relation, the so-called fundamental diagram of traffic flow, and compared with empirical data. Different regimes of traffic flow are discussed: free flow, congested mode as stop-and-go regime, and heavy viscous traffic. The traffic breakdown is studied based on the master equation as well as the Fokker-Planck approximation to calculate mean first passage times or escape rates. Generalizations are developed to allow for on-ramp effects. The calculated flux-density relation and characteristic breakdown times coincide with empirical data measured on highways. Finally, a brief summary of the stochastic cellular automata approach is given

  12. Content of system design descriptions

    International Nuclear Information System (INIS)

    1998-10-01

    A System Design Description (SDD) describes the requirements and features of a system. This standard provides guidance on the expected technical content of SDDs. The need for such a standard was recognized during efforts to develop SDDs for safety systems at DOE Hazard Category 2 nonreactor nuclear facilities. Existing guidance related to the corresponding documents in other industries is generally not suitable to meet the needs of DOE nuclear facilities. Across the DOE complex, different contractors have guidance documents, but they vary widely from site to site. While such guidance documents are valuable, no single guidance document has all the attributes that DOE considers important, including a reasonable degree of consistency or standardization. This standard is a consolidation of the best of the existing guidance. This standard has been developed with a technical content and level of detail intended to be most applicable to safety systems at DOE Hazard Category 2 nonreactor nuclear facilities. Notwithstanding that primary intent, this standard is recommended for other systems at such facilities, especially those that are important to achieving the programmatic mission of the facility. In addition, application of this standard should be considered for systems at other facilities, including non-nuclear facilities, on the basis that SDDs may be beneficial and cost-effective

  13. Quality Assurance Requirements and Description

    International Nuclear Information System (INIS)

    Ram Murthy

    2002-01-01

    The Quality Assurance Requirements and Description (QARD) is the principal Quality Assurance (QA) document for the Civilian Radioactive Waste Management Program (Program). It establishes the minimum requirements for the QA program [INTRODUCTION :1p2s (NOT A REQUIREMENT)]. The QARD contains regulatory requirements and program commitments necessary for the development of an effective QA program [INTRODUCTION :1p3s (NOT A REQUIREMENT)]. Implementing documents must be based on, and be consistent with the QARD. The QARD applies to the following: (1) Acceptance of spent nuclear fuel and high-level waste. (2) Transport of spent nuclear fuel and high-level waste. (3) Storage of spent nuclear fuel through receipt of storage cask certification or a facility operating license. (4) Monitored Geologic Repository, including the site characterization activities [Exploratory Studies Facility (ESF) and surface based testing], through receipt of an operating license. (5) High-level waste form development through qualification, production, and acceptance. (6) Characterization of DOE spent nuclear fuel, and conditioning through acceptance of DOE spent nuclear fuel. Section 2.0, Quality Assurance Program, defines in greater detail criteria for determining work subject to the QARD

  14. Description of the Triton reactor

    International Nuclear Information System (INIS)

    1967-09-01

    The Triton reactor is an enriched uranium pool type reactor. It began operation in 1959, after a divergence made on the June 30 the same year. Devoted to studies of radiation protection, its core can be displaced in the longitudinal direction. The pool can be separated in two unequal compartments by a wall. The Triton core is placed in a small compartment, the Nereide core in the big compartment. A third compartment without water is called Naiade II, is separated by a concrete wall in which is made a window closed by an aluminium plate (2.50 m x 2.70 m). The Naiade II hole is useful for protection experiments using the Nereide core. After a complete refitting, the power of the triton reactor that reached progressively from 1.2 MW to 2 MW, then 3 MW has reached in August 1965 6.5 MW. The reactor has been specialized in irradiations in fix position, the core become fix, the nereide core has been hung mobile. Since it has been used for structure materials irradiation, for radioelements fabrication and fundamental research. The following descriptions are valid for the period after August 1965 [fr

  15. Adaptation and cross-cultural validation of the Brazilian version of the Warwick-Edinburgh mental well-being scale.

    Science.gov (United States)

    Santos, Jefferson Jovelino Amaral dos; Costa, Telma Aparecida da; Guilherme, Juliane Honório; Silva, Watusi Camila da; Abentroth, Lilian Regina Lengler; Krebs, Jessica Aline; Sotoriva, Priscila

    2015-01-01

    the Warwick-Edinburgh mental well-being scale (WEMWBS) was designed to assess the level of mental well-being of a population or specific groups. The scale consists of 14 items covering functional psychological aspects, as well as well-being. The final score is calculated by adding up the response of each item, ranging from 1 to 5, obtaining a result from 14 to 70 points. the procedure was developed in accordance with the protocol recommended by the World Health Organization covering translation, back translation, semantic equivalence, expert evaluation of the previous steps, pre-test and final version of the instrument. Following, the final version was applied to a sample of 122 individuals and the data were subjected to descriptive statistical analysis, factor analysis, internal consistency and correlation with other validated instruments. we performed the instrument's adaptation to the Portuguese spoken in Brazil, replacing terms to approximate the language to expressions of everyday life. The final version showed similar results to those from the original version, demonstrated by factor analysis, internal consistency (Cronbach's alpha: 0.89) and positive correlation with instruments validated to the Portuguese language. the Brazilian version of the WEMWBS proved to be easy to use and understand, showed high internal consistency and construct validity similar to the original instrument.

  16. Adaptation and cross-cultural validation of the Brazilian version of the Warwick-Edinburgh mental well-being scale

    Directory of Open Access Journals (Sweden)

    Jefferson Jovelino Amaral dos Santos

    2015-06-01

    Full Text Available Summary Objective: the Warwick-Edinburgh mental well-being scale (WEMWBS was designed to assess the level of mental well-being of a population or specific groups. The scale consists of 14 items covering functional psychological aspects, as well as well-being. The final score is calculated by adding up the response of each item, ranging from 1 to 5, obtaining a result from 14 to 70 points. Methods: the procedure was developed in accordance with the protocol recommended by the World Health Organization covering translation, back translation, semantic equivalence, expert evaluation of the previous steps, pre-test and final version of the instrument. Following, the final version was applied to a sample of 122 individuals and the data were subjected to descriptive statistical analysis, factor analysis, internal consistency and correlation with other validated instruments. Results: we performed the instrument's adaptation to the Portuguese spoken in Brazil, replacing terms to approximate the language to expressions of everyday life. The final version showed similar results to those from the original version, demonstrated by factor analysis, internal consistency (Cronbach's alpha: 0.89 and positive correlation with instruments validated to the Portuguese language. Conclusion: the Brazilian version of the WEMWBS proved to be easy to use and understand, showed high internal consistency and construct validity similar to the original instrument.

  17. A COMETHE version with transient capability

    International Nuclear Information System (INIS)

    Vliet, J. van; Lebon, G.; Mathieu, P.

    1980-01-01

    A version of the COMETHE code is under development to simulate transient situations. This paper focuses on some aspects of the transient heat transfer models. Initially the coupling between transient heat transfer and other thermomechanical models is discussed. An estimation of the thermal characteristic times shows that the cladding temperatures are often in quasi-steady state. In order to reduce the computing time, calculations are therefore switched from a transient to a quasi-static numerical procedure as soon as such a quasi-equilibrium is detected. The temperature calculation is performed by use of the Lebon-Lambermont restricted variational principle, with piecewise polynoms as trial functions. The method has been checked by comparison with some exact results and yields good agreement for transient as well as for quasi-static situations. This method therefore provides a valuable tool for the simulation of the transient behaviour of nuclear reactor fuel rods. (orig.)

  18. Children's Sleep Habits Questionnaire - Infant Version.

    Science.gov (United States)

    Dias, Cláudia Castro; Figueiredo, Bárbara; Pinto, Tiago Miguel

    This study proposed a version of the Children's Sleep Habits Questionnaire for infants under 12 months (CSHQ-I). The sample was comprised of 299 infants, aged between 2 weeks and 12 months. Exploratory factor analysis revealed four subscales: Bedtime Resistance, Sleep Anxiety, Positive Sleep Habits, and Daytime Sleepiness. The CSHQ-I total scale presented good test-retest reliability and internal consistency. The CSHQ-I also showed good concurrent validity, with significant associations found between the CSHQ-I total scale and subscales and a measure of infant sleep-wake behaviors. The present study suggested the CSHQ-I as a reliable instrument to assess sleep problems in infants during the first year of life. Copyright © 2017 Sociedade Brasileira de Pediatria. Published by Elsevier Editora Ltda. All rights reserved.

  19. TOUGH2-GRS version 1. User manual

    Energy Technology Data Exchange (ETDEWEB)

    Navarro, Martin; Eckel, Jens

    2016-07-15

    TOUGH2 is a code for the simulation of multi-phase flow processes in porous media that has been developed by the Lawrence Berkeley National Laboratory, California, USA. Since 1991, GRS has been using the code for process analyses and safety assessments for deep geological repositories and has extended the code by several processes that are relevant for repository systems. The TOUGH2 source code that has been developed further by GRS is referred to as TOUGH2-GRS. The present report presents code version 1.1.g, which was developed in project UM13 A 03400 sponsored by the German Federal Ministry for the Environment, Nature Conservation, Building and Nuclear Safety (BMUB).

  20. The Classical Version of Stokes' Theorem Revisited

    DEFF Research Database (Denmark)

    Markvorsen, Steen

    2005-01-01

    of the vector field in a tubular shell around the given surface. The intuitive appeal of the divergence theorem is thus applied to bootstrap a corresponding intuition for Stokes' theorem. The two stated classical theorems are (like the fundamental theorem of calculus) nothing but shadows of the general version...... of Stokes' theorem for differential forms on manifolds. The main points in the present paper, however, is firstly that this latter fact usually does not get within reach for students in first year calculus courses and secondly that calculus textbooks in general only just hint at the correspondence alluded...... to above. Our proof that Stokes' theorem follows from Gauss' divergence theorem goes via a well known and often used exercise, which simply relates the concepts of divergence and curl on the local differential level. The rest of the paper uses only integration in $1$, $2$, and $3$ variables together...

  1. The classical version of Stokes' Theorem revisited

    DEFF Research Database (Denmark)

    Markvorsen, Steen

    2008-01-01

    of the vector field in a tubular shell around the given surface. The two stated classical theorems are (like the fundamental theorem of calculus) nothing but shadows of the general version of Stokes' theorem for differential forms on manifolds. The main points in the present paper, however, is firstly...... that this latter fact usually does not get within reach for students in first year calculus courses and secondly that calculus textbooks in general only just hint at the correspondence alluded to above. Our proof that Stokes' theorem follows from Gauss' divergence theorem goes via a well known and often used...... exercise, which simply relates the concepts of divergence and curl on the local differential level. The rest of the paper uses only integration in $1$, $2$, and $3$ variables together with a 'fattening' technique for surfaces and the inverse function theorem....

  2. A New And Improved Version Of HULLAC

    International Nuclear Information System (INIS)

    Klapisch, M.; Busquet, M.; Bar-Shalom, A.

    2007-01-01

    We present a new version of the collisional radiative model (CRM) generator code HULLAC. The main features are: (i) input considerably simplified and flexible, (ii) capacity of 'post-averaging' configurations and superconfigurations in mixed mode, (iii) a new fitting formula for cross sections, completely correcting the problems of the classical Sampson and Golden formula, (iv) a new algorithm for solving the rate equations of the CRM, more robust and giving more insight in the quality of the model than the biconjugate gradient method, (v) thanks to thorough comparisons with the LANL code, some errors were corrected, and very good agreement has been obtained on all types of transitions, (vi) finally, most of the code has been re-written according to up-to-date standards. This code is now ready for distribution

  3. Zgoubi user`s guide. Version 4

    Energy Technology Data Exchange (ETDEWEB)

    Meot, F. [Fermi National Accelerator Lab., Batavia, IL (United States). Dept. of Physics; Valero, S. [CEA, Gif-sur-Yvette (France)

    1997-10-15

    The computer code Zgoubi calculates trajectories of charged particles in magnetic and electric fields. At the origin specially adapted to the definition and adjustment of beam lines and magnetic spectrometers, it has so-evolved that it allows the study of systems including complex sequences of optical elements such as dipoles, quadrupoles, arbitrary multipoles and other magnetic or electric devices, and is able as well to handle periodic structures. Compared to other codes, it presents several peculiarities: (1) a numerical method for integrating the Lorentz equation, based on Taylor series, which optimizes computing time and provides high accuracy and strong symplecticity, (2) spin tracking, using the same numerical method as for the Lorentz equation, (3) calculation of the synchrotron radiation electric field and spectra in arbitrary magnetic fields, from the ray-tracing outcomes, (4) the possibility of using a mesh, which allows ray-tracing from simulated or measured (1-D, 2-D or 3-D) field maps, (5) Monte Carlo procedures: unlimited number of trajectories, in-flight decay, etc. (6) built-in fitting procedure, (7) multiturn tracking in circular accelerators including many features proper to machine parameter calculation and survey, and also the simulation of time-varying power supplies. The initial version of the Code, dedicated to the ray-tracing in magnetic fields, was developed by D. Garreta and J.C. Faivre at CEN-Saclay in the early 1970`s. It was perfected for the purpose of studying the four spectrometers (SPES I, II, III, IV) at the Laboratoire National Saturne (CEA-Saclay, France), and SPEG at Ganil (Caen, France). It is now in use in several national and foreign laboratories. This manual is intended only to describe the details of the most recent version of Zogoubi, which is far from being a {open_quotes}finished product{close_quotes}.

  4. SPARK Version 1.1 user manual

    International Nuclear Information System (INIS)

    Weissenburger, D.W.

    1988-01-01

    This manual describes the input required to use Version 1.1 of the SPARK computer code. SPARK 1.1 is a library of FORTRAN main programs and subprograms designed to calculate eddy currents on conducting surfaces where current flow is assumed zero in the direction normal to the surface. Surfaces are modeled with triangular and/or quadrilateral elements. Lorentz forces produced by the interaction of eddy currents with background magnetic fields can be output at element nodes in a form compatible with most structural analysis codes. In addition, magnetic fields due to eddy currents can be determined at points off the surface. Version 1.1 features eddy current streamline plotting with optional hidden-surface-removal graphics and topological enhancements that allow essentially any orientable surface to be modeled. SPARK also has extensive symmetry specification options. In order to make the manual as self-contained as possible, six appendices are included that present summaries of the symmetry options, topological options, coil options and code algorithms, with input and output examples. An edition of SPARK 1.1 is available on the Cray computers at the National Magnetic Fusion Energy Computer Center at Livermore, California. Another more generic edition is operational on the VAX computers at the Princeton Plasma Physics Laboratory and is available on magnetic tape by request. The generic edition requires either the GKS or PLOT10 graphics package and the IMSL or NAG mathematical package. Requests from outside the United States will be subject to applicable federal regulations regarding dissemination of computer programs. 22 refs

  5. APS beamline standard components handbook. Version 1.1

    Energy Technology Data Exchange (ETDEWEB)

    Kuzay, T.M.

    1992-01-01

    It is clear that most Advanced Photon Source (APS) Collaborative Access Team (CAT) members would like to concentrate on designing specialized equipment related to their scientific programs rather than on routine or standard beamline components. Thus, an effort is in progress at the APS to identify standard and modular components of APS beamlines. Identifying standard components is a nontrivial task because these components should support diverse beamline objectives. To assist with this effort, the APS has obtained advice and help from a Beamline Standardization and Modularization Committee consisting of experts in beamline design, construction, and operation. The staff of the Experimental Facilities Division identified various components thought to be standard items for beamlines, regardless of the specific scientific objective of a particular beamline. A generic beamline layout formed the basis for this identification. This layout is based on a double-crystal monochromator as the first optical element, with the possibility of other elements to follow. Pre-engineering designs were then made of the identified standard components. The Beamline Standardization and Modularization Committee has reviewed these designs and provided very useful input regarding the specifications of these components. We realize that there will be other configurations that may require special or modified components. This Handbook in its current version (1.1) contains descriptions, specifications, and pre-engineering design drawings of these standard components. In the future, the APS plans to add engineering drawings of identified standard beamline components. Use of standard components should result in major cost reductions for CATs in the areas of beamline design and construction.

  6. ACE-FTS version 3.0 data set: validation and data processing update

    Directory of Open Access Journals (Sweden)

    Claire Waymark

    2014-01-01

    Full Text Available On 12 August 2003, the Canadian-led Atmospheric Chemistry Experiment (ACE was launched into a 74° inclination orbit at 650 km with the mission objective to measure atmospheric composition using infrared and UV-visible spectroscopy (Bernath et al. 2005. The ACE mission consists of two main instruments, ACE-FTS and MAESTRO (McElroy et al. 2007, which are being used to investigate the chemistry and dynamics of the Earth’s atmosphere.  Here, we focus on the high resolution (0.02 cm-1 infrared Fourier Transform Spectrometer, ACE-FTS, that measures in the 750-4400 cm-1 (2.2 to 13.3 µm spectral region.  This instrument has been making regular solar occultation observations for more than nine years.  The current ACE-FTS data version (version 3.0 provides profiles of temperature and volume mixing ratios (VMRs of more than 30 atmospheric trace gas species, as well as 20 subsidiary isotopologues of the most abundant trace atmospheric constituents over a latitude range of ~85°N to ~85°S.  This letter describes the current data version and recent validation comparisons and provides a description of our planned updates for the ACE-FTS data set. [...

  7. ENDF utility codes version 6.8

    International Nuclear Information System (INIS)

    McLaughlin, P.K.

    1992-01-01

    Description and operating instructions are given for a package of utility codes operating on evaluated nuclear data files in the formats ENDF-5 and ENDF-6. Included are the data checking codes CHECKER, FIZCON, PSYCHE; the code INTER for retrieving thermal cross-sections and some other data; graphical plotting codes PLOTEF, GRALIB, graphic device interface subroutine library INTLIB; and the file maintenance and retrieval codes LISTEF, SETMDC, GETMAT, STANEF. This program package which is designed for CDC, IBM, DEC and PC computers, can be obtained on magnetic tape or floppy diskette, free of charge, from the IAEA Nuclear Data Section. (author)

  8. User's manual and technical description of the intelligent rain-gauge `DRIP1'; software version 1.02

    NARCIS (Netherlands)

    Elsen, van den H.G.M.; Lopez Fernandez, M.

    1995-01-01

    DRIP1 is an instrument for measuring and storing rainfall, air pressure and temperature data, which can be retrieved using a portable PC. DRIP1 can be used stand-alone or can be integrated in a measuring network thus allowing the measuring frequency of other network devices to depend on rainfall

  9. The CSIRO Mk3L climate system model version 1.0 – Part 1: Description and evaluation

    Directory of Open Access Journals (Sweden)

    S. J. Phipps

    2011-06-01

    Full Text Available The CSIRO Mk3L climate system model is a coupled general circulation model, designed primarily for millennial-scale climate simulations and palaeoclimate research. Mk3L includes components which describe the atmosphere, ocean, sea ice and land surface, and combines computational efficiency with a stable and realistic control climatology. This paper describes the model physics and software, analyses the control climatology, and evaluates the ability of the model to simulate the modern climate.

    Mk3L incorporates a spectral atmospheric general circulation model, a z-coordinate ocean general circulation model, a dynamic-thermodynamic sea ice model and a land surface scheme with static vegetation. The source code is highly portable, and has no dependence upon proprietary software. The model distribution is freely available to the research community. A 1000-yr climate simulation can be completed in around one-and-a-half months on a typical desktop computer, with greater throughput being possible on high-performance computing facilities.

    Mk3L produces realistic simulations of the larger-scale features of the modern climate, although with some biases on the regional scale. The model also produces reasonable representations of the leading modes of internal climate variability in both the tropics and extratropics. The control state of the model exhibits a high degree of stability, with only a weak cooling trend on millennial timescales. Ongoing development work aims to improve the model climatology and transform Mk3L into a comprehensive earth system model.

  10. The Forest Inventory and Analysis Database Version 4.0: Database Description and Users Manual for Phase 3

    Science.gov (United States)

    Christopher W. Woodall; Barbara L. Conkling; Michael C. Amacher; John W. Coulston; Sarah Jovan; Charles H. Perry; Beth Schulz; Gretchen C. Smith; Susan. Will Wolf

    2010-01-01

    Describes the structure of the Forest Inventory and Analysis Database (FIADB) 4.0 for phase 3 indicators. The FIADB structure provides a consistent framework for storing forest health monitoring data across all ownerships for the entire United States. These data are available to the public.

  11. TIM Version 3.0 beta Technical Description and User Guide - Appendix F - Approach for Calculating Juvenile Dietary Exposure

    Science.gov (United States)

    Use the available information on the relationship between juvenile body weights and energetic requirements to develop a general approach for calculating juvenile dietary exposure doses appropriate for a range of avian species.

  12. SCAMPI, V1.0 Standard CMMI(SM) Assessment Method to Process Improvement: Method Description, Version 1.0

    National Research Council Canada - National Science Library

    2000-01-01

    ...) approach to software process improvement. This document is not intended to provide in depth information on how to conduct a SCAMPI assessment, perform detailed planning for an assessment, or train an assessment team...

  13. IWR-MAIN Water Use Forecasting System. Version 5.1. User’s Manual and System Description

    Science.gov (United States)

    1987-12-01

    2051 Bread, Cake & Ret. Prods 120 225 Knitting Mills 2052 Cookies & Crackers 29 226 Textile Flnlshng,exc.Woot...... 206 Sugar & Confectionery prd... Confectionery Products 1013 207 Fats & Oils 1014 208 Beverages 1015 2082 Malt Beverages 1016 2086 Bottled & Canned Soft Drinks 1017 2087 Flavoring Extracts...225 Knitting Mills 11 2052 Cookies & Crackers .... 226 Textile Finishng,exc.WooL ....... 206 Sugar & Confectionery prd 37 227 Floor Covering

  14. A GLOBAL SIMULATION OF TROPOSPHERIC OZONE AND RELATED TRACERS: DESCRIPTION AND EVALUATION OF MOZART, VERSION 2. (R826384)

    Science.gov (United States)

    The perspectives, information and conclusions conveyed in research project abstracts, progress reports, final reports, journal abstracts and journal publications convey the viewpoints of the principal investigator and may not represent the views and policies of ORD and EPA. Concl...

  15. A new description of the superstring

    Energy Technology Data Exchange (ETDEWEB)

    Berkovits, Nathan [Sao Paulo Univ., SP (Brazil). Inst. de Fisica. Dept. de Fisica Matematica]. E-mail: nberkovi@snfma2.if.usp.br

    1996-07-01

    This is a review of the new manifestly spacetime-supersymmetric description of the superstring. The new description contains N=2 world sheet supersymmetry, and is related by a field redefinition to the standard RNS description. It is especially convenient for four-dimensional compactifications since S O (3,1) super-Poincare invariance can be made manifest. Parts of this work have been done in collaboration with Warren Siegel and Cumrun Vafa. (author)

  16. Audio Description as a Pedagogical Tool

    OpenAIRE

    Georgina Kleege; Scott Wallin

    2015-01-01

    Audio description is the process of translating visual information into words for people who are blind or have low vision. Typically such description has focused on films, museum exhibitions, images and video on the internet, and live theater. Because it allows people with visual impairments to experience a variety of cultural and educational texts that would otherwise be inaccessible, audio description is a mandated aspect of disability inclusion, although it remains markedly underdeveloped ...

  17. Building Program Models Incrementally from Informal Descriptions.

    Science.gov (United States)

    1979-10-01

    AD-AOB6 50 STANFORD UNIV CA DEPT OF COMPUTER SCIENCE F/G 9/2 BUILDING PROGRAM MODELS INCREMENTALLY FROM INFORMAL DESCRIPTION--ETC(U) OCT 79 B P...port SCI.ICS.U.79.2 t Building Program Models Incrementally from Informal Descriptions by Brian P. McCune Research sponsored by Defense Advanced...TYPE OF REPORT & PERIOD COVERED Building Program Models Incrementally from Informal Descriptions. , technical, October 1979 6. PERFORMING ORG

  18. The Oswestry Disability Index (version 2.1a): validation of a Dutch language version.

    Science.gov (United States)

    van Hooff, Miranda L; Spruit, Maarten; Fairbank, Jeremy C T; van Limbeek, Jacques; Jacobs, Wilco C H

    2015-01-15

    A cross-sectional study on baseline data. To translate the Oswestry Disability Index (ODI) version 2.1a into the Dutch language and to validate its use in a cohort of patients with chronic low back pain in secondary spine care. Patient-reported outcome measures (PROMs) are commonly accepted to evaluate the outcome of spine interventions. Functional status is an important outcome in spine research. The ODI is a recommended condition-specific patient-reported outcome measure used to evaluate functional status in patients with back pain. As yet, no formal translated Dutch version exists. The ODI was translated according to established guidelines. The final version was built into the electronic web-based system in addition with the Roland Morris Disability Questionnaire, the numeric rating scale for pain severity, 36-Item Short Form Health Survey Questionnaire for quality of life, and the hospital anxiety and depression scale. Baseline data were used of 244 patients with chronic low back pain who participated in a combined physical and psychological program. Floor and ceiling effects, internal consistency, and the construct validity were evaluated using quality criteria. The mean ODI (standard deviation) was 39.6 (12.3); minimum 6, maximum 70. Most of the participants (88%) were moderately to severely disabled. Factor analysis determined a 1-factor structure (36% explained variance) and the homogeneity of ODI items is shown (Cronbach α = 0.79). The construct validity is supported as all (6:6) the a priori hypotheses were confirmed. Moreover, the ODI and Roland Morris Disability Questionnaire, showed a strong significant correlation (r = 0.68, P disability among Dutch patients with chronic low back pain. This translated condition-specific patient-reported outcome measure version is recommended for use in future back pain research and to evaluate outcome of back care in the Netherlands.

  19. Global Fertilizer and Manure, Version 1: Nitrogen Fertilizer Application

    Data.gov (United States)

    National Aeronautics and Space Administration — The Nitrogen Fertilizer Application dataset of the Global Fertilizer and Manure, Version 1 Data Collection represents the amount of nitrogen fertilizer nutrients...

  20. Global Fertilizer and Manure, Version 1: Phosphorus Fertilizer Application

    Data.gov (United States)

    National Aeronautics and Space Administration — The Phosphorus Fertilizer Application dataset of the Global Fertilizer and Manure, Version 1 Data Collection represents the amount of phosphorus fertilizer nutrients...

  1. Verification of RESRAD-RDD. (Version 2.01)

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, Jing-Jy [Argonne National Lab. (ANL), Argonne, IL (United States); Flood, Paul E. [Argonne National Lab. (ANL), Argonne, IL (United States); LePoire, David [Argonne National Lab. (ANL), Argonne, IL (United States); Kamboj, Sunita [Argonne National Lab. (ANL), Argonne, IL (United States); Yu, Charley [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-09-01

    In this report, the results generated by RESRAD-RDD version 2.01 are compared with those produced by RESRAD-RDD version 1.7 for different scenarios with different sets of input parameters. RESRAD-RDD version 1.7 is spreadsheet-driven, performing calculations with Microsoft Excel spreadsheets. RESRAD-RDD version 2.01 revamped version 1.7 by using command-driven programs designed with Visual Basic.NET to direct calculations with data saved in Microsoft Access database, and re-facing the graphical user interface (GUI) to provide more flexibility and choices in guideline derivation. Because version 1.7 and version 2.01 perform the same calculations, the comparison of their results serves as verification of both versions. The verification covered calculation results for 11 radionuclides included in both versions: Am-241, Cf-252, Cm-244, Co-60, Cs-137, Ir-192, Po-210, Pu-238, Pu-239, Ra-226, and Sr-90. At first, all nuclidespecific data used in both versions were compared to ensure that they are identical. Then generic operational guidelines and measurement-based radiation doses or stay times associated with a specific operational guideline group were calculated with both versions using different sets of input parameters, and the results obtained with the same set of input parameters were compared. A total of 12 sets of input parameters were used for the verification, and the comparison was performed for each operational guideline group, from A to G, sequentially. The verification shows that RESRAD-RDD version 1.7 and RESRAD-RDD version 2.01 generate almost identical results; the slight differences could be attributed to differences in numerical precision with Microsoft Excel and Visual Basic.NET. RESRAD-RDD version 2.01 allows the selection of different units for use in reporting calculation results. The results of SI units were obtained and compared with the base results (in traditional units) used for comparison with version 1.7. The comparison shows that RESRAD

  2. Anthropogenic Biomes of the World, Version 2: 1800

    Data.gov (United States)

    National Aeronautics and Space Administration — The Anthropogenic Biomes of the World, Version 2: 1800 data set describes anthropogenic transformations within the terrestrial biosphere caused by sustained direct...

  3. Anthropogenic Biomes of the World, Version 2: 1900

    Data.gov (United States)

    National Aeronautics and Space Administration — The Anthropogenic Biomes of the World, Version 2: 1900 data set describes anthropogenic transformations within the terrestrial biosphere caused by sustained direct...

  4. Anthropogenic Biomes of the World, Version 2: 2000

    Data.gov (United States)

    National Aeronautics and Space Administration — The Anthropogenic Biomes of the World, Version 2: 2000 data set describes anthropogenic transformations within the terrestrial biosphere caused by sustained direct...

  5. Anthropogenic Biomes of the World, Version 2: 1700

    Data.gov (United States)

    National Aeronautics and Space Administration — The Anthropogenic Biomes of the World, Version 2: 1700 data set describes anthropogenic transformations within the terrestrial biosphere caused by sustained direct...

  6. ISLSCP II Global Precipitation Climatology Project Version 2, Monthly Precipitation

    Data.gov (United States)

    National Aeronautics and Space Administration — ABSTRACT: The Global Precipitation Climatology Project (GPCP) Version 2 data set includes global, monthly precipitation rates and associated random errors (RMSE),...

  7. A Statistical Review of CALIOP Version 3 and Version 4 Cloud Aerosol Discrimination

    Science.gov (United States)

    Zeng, S.

    2016-12-01

    The Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) on board the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) mission has now delivered a 10-year record of high-resolution profiles of backscatter at 532 nm and 1064 nm and linear depolarization at 532 nm. These long-term active sensor measurements at global scale have led to significant advances in our understanding of the vertical distribution of clouds and aerosols in the atmosphere. In the fall of 2016, the CALIPSO science team is scheduled to release a new version of their cloud and aerosol data products. The new cloud and aerosol discrimination products are derived using updated probability density functions that account for numerous improvements to the CALIOP calibration and the use of the GMAO MERRA-2 meteorological data. Moreover, the CAD algorithm is now applied to all layers detected, thus greatly improving the identification of such features as overshooting convective clouds, stratospheric aerosol layers, and high intensity dust storms. Post-processing modules are added to the standard CAD algorithm to ensure proper identification of (for example) the tenuous edges of cirrus clouds and water clouds lying beneath optically dense smoke layers. This work presents statistical comparisons between the CALIOP version 3 and version 4 data sets. Areas of improvement are highlighted, sources of continuing uncertainty are discussed and a list of best practices for data users is provided.

  8. Systems analysis programs for hands-on integrated reliability evaluations (SAPHIRE) version 5.0

    International Nuclear Information System (INIS)

    Russell, K.D.; Kvarfordt, K.J.; Skinner, N.L.; Wood, S.T.

    1994-07-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) refers to a set of several microcomputer programs that were developed to create and analyze probabilistic risk assessments (PRAs), primarily for nuclear power plants. This volume is the reference manual for the Systems Analysis and Risk Assessment (SARA) System Version 5.0, a microcomputer-based system used to analyze the safety issues of a open-quotes familyclose quotes [i.e., a power plant, a manufacturing facility, any facility on which a probabilistic risk assessment (PRA) might be performed]. The SARA database contains PRA data primarily for the dominant accident sequences of a family and descriptive information about the family including event trees, fault trees, and system model diagrams. The number of facility databases that can be accessed is limited only by the amount of disk storage available. To simulate changes to family systems, SARA users change the failure rates of initiating and basic events and/or modify the structure of the cut sets that make up the event trees, fault trees, and systems. The user then evaluates the effects of these changes through the recalculation of the resultant accident sequence probabilities and importance measures. The results are displayed in tables and graphs that may be printed for reports. A preliminary version of the SARA program was completed in August 1985 and has undergone several updates in response to user suggestions and to maintain compatibility with the other SAPHIRE programs. Version 5.0 of SARA provides the same capability as earlier versions and adds the ability to process unlimited cut sets; display fire, flood, and seismic data; and perform more powerful cut set editing

  9. User's Guide for TOUGH2-MP - A Massively Parallel Version of the TOUGH2 Code

    Energy Technology Data Exchange (ETDEWEB)

    Earth Sciences Division; Zhang, Keni; Zhang, Keni; Wu, Yu-Shu; Pruess, Karsten

    2008-05-27

    TOUGH2-MP is a massively parallel (MP) version of the TOUGH2 code, designed for computationally efficient parallel simulation of isothermal and nonisothermal flows of multicomponent, multiphase fluids in one, two, and three-dimensional porous and fractured media. In recent years, computational requirements have become increasingly intensive in large or highly nonlinear problems for applications in areas such as radioactive waste disposal, CO2 geological sequestration, environmental assessment and remediation, reservoir engineering, and groundwater hydrology. The primary objective of developing the parallel-simulation capability is to significantly improve the computational performance of the TOUGH2 family of codes. The particular goal for the parallel simulator is to achieve orders-of-magnitude improvement in computational time for models with ever-increasing complexity. TOUGH2-MP is designed to perform parallel simulation on multi-CPU computational platforms. An earlier version of TOUGH2-MP (V1.0) was based on the TOUGH2 Version 1.4 with EOS3, EOS9, and T2R3D modules, a software previously qualified for applications in the Yucca Mountain project, and was designed for execution on CRAY T3E and IBM SP supercomputers. The current version of TOUGH2-MP (V2.0) includes all fluid property modules of the standard version TOUGH2 V2.0. It provides computationally efficient capabilities using supercomputers, Linux clusters, or multi-core PCs, and also offers many user-friendly features. The parallel simulator inherits all process capabilities from V2.0 together with additional capabilities for handling fractured media from V1.4. This report provides a quick starting guide on how to set up and run the TOUGH2-MP program for users with a basic knowledge of running the (standard) version TOUGH2 code, The report also gives a brief technical description of the code, including a discussion of parallel methodology, code structure, as well as mathematical and numerical methods used

  10. User's Guide for TOUGH2-MP - A Massively Parallel Version of the TOUGH2 Code

    International Nuclear Information System (INIS)

    Earth Sciences Division; Zhang, Keni; Zhang, Keni; Wu, Yu-Shu; Pruess, Karsten

    2008-01-01

    TOUGH2-MP is a massively parallel (MP) version of the TOUGH2 code, designed for computationally efficient parallel simulation of isothermal and nonisothermal flows of multicomponent, multiphase fluids in one, two, and three-dimensional porous and fractured media. In recent years, computational requirements have become increasingly intensive in large or highly nonlinear problems for applications in areas such as radioactive waste disposal, CO2 geological sequestration, environmental assessment and remediation, reservoir engineering, and groundwater hydrology. The primary objective of developing the parallel-simulation capability is to significantly improve the computational performance of the TOUGH2 family of codes. The particular goal for the parallel simulator is to achieve orders-of-magnitude improvement in computational time for models with ever-increasing complexity. TOUGH2-MP is designed to perform parallel simulation on multi-CPU computational platforms. An earlier version of TOUGH2-MP (V1.0) was based on the TOUGH2 Version 1.4 with EOS3, EOS9, and T2R3D modules, a software previously qualified for applications in the Yucca Mountain project, and was designed for execution on CRAY T3E and IBM SP supercomputers. The current version of TOUGH2-MP (V2.0) includes all fluid property modules of the standard version TOUGH2 V2.0. It provides computationally efficient capabilities using supercomputers, Linux clusters, or multi-core PCs, and also offers many user-friendly features. The parallel simulator inherits all process capabilities from V2.0 together with additional capabilities for handling fractured media from V1.4. This report provides a quick starting guide on how to set up and run the TOUGH2-MP program for users with a basic knowledge of running the (standard) version TOUGH2 code. The report also gives a brief technical description of the code, including a discussion of parallel methodology, code structure, as well as mathematical and numerical methods used

  11. Freeform surface descriptions. Part I: Mathematical representations

    Science.gov (United States)

    Broemel, Anika; Lippmann, Uwe; Gross, Herbert

    2017-10-01

    Optical systems can benefit strongly from freeform surfaces; however, the choice of the right surface representation is not trivial and many aspects must be considered. In this work, we discuss the general approach classical globally defined representations, as well as the basic mathematics and properties of the most commonly used descriptions and present a new description developed by us for describing freeform surfaces.

  12. UO3 plant turnover - facility description document

    International Nuclear Information System (INIS)

    Clapp, D.A.

    1995-01-01

    This document was developed to provide a facility description for those portions of the UO 3 Facility being transferred to Bechtel Hanford Company, Inc. (BHI) following completion of facility deactivation. The facility and deactivated state condition description is intended only to serve as an overview of the plant as it is being transferred to BHI

  13. A Relevance Theoretic Account of Definite Descriptions

    Science.gov (United States)

    Puglisi, Diana C.

    2014-01-01

    Definite descriptions have a number of different readings, the most prominent being the referential and attributive readings. On the referential reading, the description "The current President of the USA" is interpreted as "Barack Obama"; read attributively, it is interpreted as "the current President of the USA, whoever…

  14. Waste Management System Description Document (WMSD)

    International Nuclear Information System (INIS)

    1992-02-01

    This report is an appendix of the ''Waste Management Description Project, Revision 1''. This appendix is about the interim approach for the technical baseline of the waste management system. It describes the documentation and regulations of the waste management system requirements and description. (MB)

  15. A DESCRIPTION OF BUFO PARDALIS TADPOLES (ANURA ...

    African Journals Online (AJOL)

    Tadpoles of Bufo parda/is Hewitt from Kei Road, Cape Province, are described. INTRODUCTION. Although tadpoles of B. pardalis have been included in Van Dijk's (1971) key to the genus Bufa, no adequate description of this taxon has yet been published. Further studies on variability depend upon a complete description ...

  16. Evaluating Visual Information Provided by Audio Description.

    Science.gov (United States)

    Peli, E.; And Others

    1996-01-01

    The video and standard audio portions of 2 television programs were presented to 25 adults with low vision and 24 adults with normal vision; 29 additional subjects only heard the standard audio portions. Subjects then answered questions based on audio descriptions (AD) provided by Descriptive Video Service. Results indicated that some AD…

  17. Sierra Toolkit Manual Version 4.48.

    Energy Technology Data Exchange (ETDEWEB)

    Sierra Toolkit Team

    2018-03-01

    This report provides documentation for the SIERRA Toolkit (STK) modules. STK modules are intended to provide infrastructure that assists the development of computational engineering soft- ware such as finite-element analysis applications. STK includes modules for unstructured-mesh data structures, reading/writing mesh files, geometric proximity search, and various utilities. This document contains a chapter for each module, and each chapter contains overview descriptions and usage examples. Usage examples are primarily code listings which are generated from working test programs that are included in the STK code-base. A goal of this approach is to ensure that the usage examples will not fall out of date. This page intentionally left blank.

  18. Salinas. Theory Manual Version 2.8

    Energy Technology Data Exchange (ETDEWEB)

    Reese, Garth M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Walsh, Timothy [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Bhardwaj, Manoj K. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2009-02-01

    Salinas provides a massively parallel implementation of structural dynamics finite element analysis, required for high fidelity, validated models used in modal, vibration, static and shock analysis of structural systems. This manual describes the theory behind many of the constructs in Salinas. For a more detailed description of how to use Salinas , we refer the reader to Salinas, Users Notes. Many of the constructs in Salinas are pulled directly from published material. Where possible, these materials are referenced herein. However, certain functions in Salinas are specific to our implementation. We try to be far more complete in those areas. The theory manual was developed from several sources including general notes, a programmer notes manual, the user's notes and of course the material in the open literature.

  19. dfnWorks, Version 1.0

    Energy Technology Data Exchange (ETDEWEB)

    2016-09-15

    DFNWorks is a suite of software for generating and solving flow and transport physics on a Discrete Fracture Network (DFN). The suite is composed of three components: DFNGen: Stochastic fracture generation, mesh generation, model setup; DFNFlow: Flow solution using PFLOTRAN or FEHM control volume formulation solver; DFNTrans: Particle tracking transport; DFNGen Algorithm Description: This is a workflow that uses Mathematica software, Python scripts written by the authors and the LaGriT software to generate; DFNFlow; The solution of flow in porous media is accomplished by coupling DFNGen output with the existing software packages FEHM and PFLOTRAN. The DFNWorks workflow involves modules and scripts that translate DFNGen output to formats compatible with FEHM and PFLOTRAN input. FEHM LA-CC-2012-083 PFLOTRAN LA-CC-09-047 LaGriT LA-CC-07-38 DFNTrans Stand alone particle tracking algorithm that takes FEHM/PFLOTRAN flow solution as output and computes velocity field and advects particles.

  20. Turkish version of the Academic Motivation Scale.

    Science.gov (United States)

    Can, Gürhan

    2015-04-01

    The purpose of this study was to adapt the college version of the Academic Motivation Scale (AMS) into Turkish. The participants were 797 college students (437 men, 360 women) with a mean age of 20.1 yr. A seven-factor model of the scale, as well as alternative models (five-, three-, two-, and one-factor models) were investigated and compared through confirmatory factor analysis. The seven-factor model demonstrated adequate fit to the data. The fit indices obtained from the five-factor model were acceptable also. Hancock's coefficient H values and test-retest correlation coefficients of the subscales indicated that reliability of the scale was adequate except for the identified regulation subscale. The CFA conducted for the groups of men and women produced more acceptable fit indices values for men than women, but women obtained significantly higher scores from the AMS subscales. Correlations among the seven subscales partially supported the simplex pattern which claims that the neighboring subscales should have stronger positive correlations than the non-neighboring subscales and that the subscales which are the farthest apart should have the strongest negative relationships.

  1. Curiosity rover LEGO® version could land soon

    Science.gov (United States)

    Showstack, Randy

    2012-09-01

    Now that NASA's Curiosity rover has landed on Mars, a smaller LEGO® plastic brick construction version could be landing in toy stores. Less than 2 weeks after Curiosity set down on 5 August, a LEGO® set concept model designed by a mechanical and aerospace engineer who worked on the real rover garnered its 10,000th supporter on the Web site of CUUSOO, a Japanese partner of the LEGO® group. That milestone triggered a company review that began in September 2012 to test the model's “playability, safety, and ft with the LEGO® brand,” according to a congratulatory statement from the company to designer Stephen Pakbaz. Pakbaz told Eos that he has been an avid LEGO® and space exploration fan for most of his life. “For me, creating a LEGO® model of Curiosity using my firsthand knowledge of the rover was inevitable. What I enjoyed most was being able to faithfully replicate and subsequently demonstrate the rocker-bogie suspension system to friends, family, and coworkers,” he noted, referring to the suspension system that allows the rover to climb over obstacles while keeping its wheels on the ground. Pakbaz, who is currently with Orbital Sciences Corporation, was involved with aspects of the rover while working at the Jet Propulsion Laboratory from 2007 to 2011 as a mechanical engineer.

  2. Towards a multilingual version of terminologia anatomica.

    Science.gov (United States)

    Fabry, Paul; Baud, Robert; Lovis, Christian

    2005-01-01

    Terminologia Anatomica (TA) is the new standard in anatomical terminology. This terminology is available only in Latin and English and its worldwide adoption is subdued to the addition of terms from others languages. On the other hand Nomina Anatomica (NA), the previous standard, has been widely translated. Aim of this work was to append foreign terms to TA by using similarity matching algorithm between its Latin terms and those from NA. A semi-automatic matching of Latin terms from TA with those of NA was performed using a string-to-string distance algorithm and manual assessment. We used a French - Latin version of NA together with TA and we suggested French terms for TA. Coverage was evaluated by the number of exact and approximate matches. A target of 80% was set due to the superior number of terms in TA compared to NA. Relevance was estimated by manually comparing the meanings of the English and French terms related to the same Latin term. The question was whether they refer to the same anatomical structure. Exact or approximate matches were found for 5,982 terms (76.5%) of TA. Our results outlined that more than 75% of the terms from TA came from NA, most of them were left unchanged and all were used with the same meaning. This method produces relevant results, reaching our 80% target. The method is based only on Latin terms and can be used for other languages and for others terminologies including Latin terms.

  3. Acute Lymphoblastic Leukemia, Version 2.2015.

    Science.gov (United States)

    Alvarnas, Joseph C; Brown, Patrick A; Aoun, Patricia; Ballen, Karen Kuhn; Barta, Stefan K; Borate, Uma; Boyer, Michael W; Burke, Patrick W; Cassaday, Ryan; Castro, Januario E; Coccia, Peter F; Coutre, Steven E; Damon, Lloyd E; DeAngelo, Daniel J; Douer, Dan; Frankfurt, Olga; Greer, John P; Johnson, Robert A; Kantarjian, Hagop M; Klisovic, Rebecca B; Kupfer, Gary; Litzow, Mark; Liu, Arthur; Rao, Arati V; Shah, Bijal; Uy, Geoffrey L; Wang, Eunice S; Zelenetz, Andrew D; Gregory, Kristina; Smith, Courtney

    2015-10-01

    Treatment of acute lymphoblastic leukemia (ALL) continues to advance, as evidenced by the improved risk stratification of patients and development of newer treatment options. Identification of ALL subtypes based on immunophenotyping and cytogenetic and molecular markers has resulted in the inclusion of Philadelphia-like ALL and early T-cell precursor ALL as subtypes that affect prognosis. Identification of Ikaros mutations has also emerged as a prognostic factor. In addition to improved prognostication, treatment options for patients with ALL have expanded, particularly with regard to relapsed/refractory ALL. Continued development of second-generation tyrosine kinase inhibitors and the emergence of immunotherapy, including blinatumomab and chimeric antigen receptor T-cell therapy, have improved survival. Furthermore, incorporation of minimal residual disease (MRD) monitoring has shown insight into patient outcomes and may lead to treatment modification or alternative treatment strategies in select populations. This excerpt focuses on the sections of the ALL guidelines specific to clinical presentation and diagnosis, treatment of relapsed/refractory ALL, and incorporation of MRD monitoring. To view the most recent complete version of these guidelines, visit NCCN.org. Copyright © 2015 by the National Comprehensive Cancer Network.

  4. Republicanism: An Unattractive Version of Liberalism

    Directory of Open Access Journals (Sweden)

    Carla Saenz

    2010-12-01

    Full Text Available http://dx.doi.org/10.5007/1677-2954.2008v7n2p267 Philip Pettit is the most important contemporany advocate of the republican tradition in political philosophy. He advances a concept of freedom as non-domination, and constrasts it with the liberal conception  of freedom as non-interference. He claims that two features distinguish domination from interference: (1 The capacity of interference ( as opposed to actual interference, and (2 the fact that the interference is arbitrary. I shall argue that Pettit´s republicanism is not sufficiently differente from liberalism, certainly not from John Rawls´s liberalism.  The only relevant difference between republicanism and liberalism is related to (2: the notion of arbitrariness. Yet this difference makes republicanism an unattractive version of liberalism, insofar as it, paradoxically, allows for republicanism to legitimize a grave form of domination, paternalism, and, in general, domination coming from the state. This problem gets exacerbated by Pettit´s consequentialist framework.

  5. Audio Description as a Pedagogical Tool

    Directory of Open Access Journals (Sweden)

    Georgina Kleege

    2015-05-01

    Full Text Available Audio description is the process of translating visual information into words for people who are blind or have low vision. Typically such description has focused on films, museum exhibitions, images and video on the internet, and live theater. Because it allows people with visual impairments to experience a variety of cultural and educational texts that would otherwise be inaccessible, audio description is a mandated aspect of disability inclusion, although it remains markedly underdeveloped and underutilized in our classrooms and in society in general. Along with increasing awareness of disability, audio description pushes students to practice close reading of visual material, deepen their analysis, and engage in critical discussions around the methodology, standards and values, language, and role of interpretation in a variety of academic disciplines. We outline a few pedagogical interventions that can be customized to different contexts to develop students' writing and critical thinking skills through guided description of visual material.

  6. Community Land Model Version 3.0 (CLM3.0) Developer's Guide

    Energy Technology Data Exchange (ETDEWEB)

    Hoffman, FM

    2004-12-21

    This document describes the guidelines adopted for software development of the Community Land Model (CLM) and serves as a reference to the entire code base of the released version of the model. The version of the code described here is Version 3.0 which was released in the summer of 2004. This document, the Community Land Model Version 3.0 (CLM3.0) User's Guide (Vertenstein et al., 2004), the Technical Description of the Community Land Model (CLM) (Oleson et al., 2004), and the Community Land Model's Dynamic Global Vegetation Model (CLM-DGVM): Technical Description and User's Guide (Levis et al., 2004) provide the developer, user, or researcher with details of implementation, instructions for using the model, a scientific description of the model, and a scientific description of the Dynamic Global Vegetation Model integrated with CLM respectively. The CLM is a single column (snow-soil-vegetation) biogeophysical model of the land surface which can be run serially (on a laptop or personal computer) or in parallel (using distributed or shared memory processors or both) on both vector and scalar computer architectures. Written in Fortran 90, CLM can be run offline (i.e., run in isolation using stored atmospheric forcing data), coupled to an atmospheric model (e.g., the Community Atmosphere Model (CAM)), or coupled to a climate system model (e.g., the Community Climate System Model Version 3 (CCSM3)) through a flux coupler (e.g., Coupler 6 (CPL6)). When coupled, CLM exchanges fluxes of energy, water, and momentum with the atmosphere. The horizontal land surface heterogeneity is represented by a nested subgrid hierarchy composed of gridcells, landunits, columns, and plant functional types (PFTs). This hierarchical representation is reflected in the data structures used by the model code. Biophysical processes are simulated for each subgrid unit (landunit, column, and PFT) independently, and prognostic variables are maintained for each subgrid unit

  7. Reference manual for generation and analysis of Habitat Time Series: version II

    Science.gov (United States)

    Milhous, Robert T.; Bartholow, John M.; Updike, Marlys A.; Moos, Alan R.

    1990-01-01

    by the Aquatic Systems Branch of the National Ecology Research Center. For more information about the TSLIB software, refer to the Memorandum of Understanding. Chapter 1 provides a brief introduction to the Instream Flow Incremental Methodology and TSLIB. Other chapters in this manual provide information on the different aspects of using the models. The information contained in the other chapters includes (2) acquisition, entry, manipulation, and listing of streamflow data; (3) entry, manipulation, and listing of the habitat-versus-streamflow function; (4) transferring streamflow data; (5) water resources systems analysis; (6) generation and analysis of daily streamflow and habitat values; (7) generation of the time series of monthly habitats; (8) manipulation, analysis, and display of month time series data; and (9) generation, analysis, and display of annual time series data. Each section includes documentation for the programs therein with at least one page of information for each program, including a program description, instructions for running the program, and sample output. The Appendixes contain the following: (A) sample file formats; (B) descriptions of default filenames; (C) alphabetical summary of batch-procedure files; (D) installing and running TSLIB on a microcomputer; (E) running TSLIB on a CDC Cyber computer; (F) using the TSLIB user interface program (RTSM); and (G) running WATSTORE on the USGS Amdahl mainframe computer. The number for this version of TSLIB--Version II-- is somewhat arbitrary, as the TSLIB programs were collected into a library some time ago; but operators tended to use and manage them as individual programs. Therefore, we will consider the group of programs from the past that were only on the CDC Cyber computer as Version 0; the programs from the past that were on both the Cyber and the IBM-compatible microcomputer as Version I; and the programs contained in this reference manual as Version II.

  8. NOAA Climate Data Record (CDR) of AVHRR Daily and Monthly Aerosol Optical Thickness over Global Oceans, Version 1.0 (Version Superseded)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Version 1 of the dataset has been superseded by a newer version. Users should not use version 1 except in rare cases (e.g., when reproducing previous studies that...

  9. NOAA Climate Data Record (CDR) of AVHRR Daily and Monthly Aerosol Optical Thickness over Global Oceans, Version 2.0 (Version Superseded)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Version 2 of the dataset has been superseded by a newer version. Users should not use version 2 except in rare cases (e.g., when reproducing previous studies that...

  10. Confidence assessment. Site-descriptive modelling SDM-Site Laxemar

    Energy Technology Data Exchange (ETDEWEB)

    2008-12-15

    The objective of this report is to assess the confidence that can be placed in the Laxemar site descriptive model, based on the information available at the conclusion of the surface-based investigations (SDM-Site Laxemar). In this exploration, an overriding question is whether remaining uncertainties are significant for repository engineering design or long-term safety assessment and could successfully be further reduced by more surface-based investigations or more usefully by explorations underground made during construction of the repository. Procedures for this assessment have been progressively refined during the course of the site descriptive modelling, and applied to all previous versions of the Forsmark and Laxemar site descriptive models. They include assessment of whether all relevant data have been considered and understood, identification of the main uncertainties and their causes, possible alternative models and their handling, and consistency between disciplines. The assessment then forms the basis for an overall confidence statement. The confidence in the Laxemar site descriptive model, based on the data available at the conclusion of the surface based site investigations, has been assessed by exploring: - Confidence in the site characterization data base, - remaining issues and their handling, - handling of alternatives, - consistency between disciplines and - main reasons for confidence and lack of confidence in the model. Generally, the site investigation database is of high quality, as assured by the quality procedures applied. It is judged that the Laxemar site descriptive model has an overall high level of confidence. Because of the relatively robust geological model that describes the site, the overall confidence in the Laxemar Site Descriptive model is judged to be high, even though details of the spatial variability remain unknown. The overall reason for this confidence is the wide spatial distribution of the data and the consistency between

  11. Self-describing schemes for interoperable MPEG-7 multimedia content descriptions

    Science.gov (United States)

    Paek, Seungyup; Benitez, Ana B.; Chang, Shih-Fu

    1998-12-01

    In this paper, we present the self-describing schemes for interoperable image/video content descriptions, which are being developed as part of our proposal to the MPEG-7 standard. MPEG-7 aims to standardize content descriptions for multimedia data. The objective of this standard is to facilitate content-focused applications like multimedia searching, filtering, browsing, and summarization. To ensure maximum interoperability and flexibility, our descriptions are defined using the eXtensible Markup Language (XML), developed by the World Wide Web Consortium. We demonstrate the feasibility and efficiency of our self-describing schemes in our MPEG-7 testbed. First, we show how our scheme can accommodate image and video descriptions that are generated by a wide variety of systems. Then, we present two systems being developed that are enabled and enhanced by the proposed approach for multimedia content descriptions. The first system is an intelligent search engine with an associated expressive query interface. The second system is a new version of MetaSEEk, a metasearch system for mediation among multiple search engines for audio-visual information.

  12. 16 CFR 460.7 - Which test version to use.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Which test version to use. 460.7 Section 460.7 Commercial Practices FEDERAL TRADE COMMISSION TRADE REGULATION RULES LABELING AND ADVERTISING OF... effect when this regulation was promulgated. If ASTM changes a test method, the new version will...

  13. Evaluation of Psychometric Properties of the Malay Version ...

    African Journals Online (AJOL)

    Background: The 10‑item version of Perceived Stress Scale (PSS‑10) is a widely used tool to measure stress. The Malay version of the PSS‑10 has been validated among Malaysian Medical Students. However, studies have not been conducted to assess its validity in occupational settings. Aim: The aim of this study is to ...

  14. Validation of a Portuguese Version of the Children's Hope Scale

    Science.gov (United States)

    Marques, Susana C.; Pais-Ribeiro, J. L.; Lopez, Shane J.

    2009-01-01

    The article describes the development of the Portuguese version of the Children's Hope Scale and the examination of its psychometric properties. A sample of 367 Portuguese students completed the Portuguese-language versions of the Children's Hope Scale (CHS; Snyder et al., 1997), Students' Life Satisfaction Scale (SLSS; Huebner, 1991), Global…

  15. Evaluation of Psychometric Properties of the Malay Version ...

    African Journals Online (AJOL)

    Evaluation of Psychometric Properties of the Malay. Version Perceived Stress Scale in Two Occupational. Settings In Malaysia. Al‑Dubai SAR, Ganasegeran K1, Barua .... cultures.[16] The evaluation of psychometric properties of the. Malay version PSS-10 in this study will enable researchers in the future to use a validated ...

  16. External cephalic version before elective caesarean section for breech presentation

    International Nuclear Information System (INIS)

    Zafar, F.; Sanusi, A.

    2008-01-01

    The Royal College of Obstetrics and Gynaecology guidelines state that all uncomplicated breech Presentation should be offered external cephalic version and all such women should be briefed about the risks and benefits of external cephalic version and all such women should be briefed about the risks and benefits of external cephalic version before undertaking the procedure. To ascertain the acceptability of external cephalic version before elective caesarean section for breech Presentation by pregnant ladies and see whether they were adequately informed about the risks and benefits. The clinical audit was registered with the audit department at Watford general hospital and written Consent for the access of medical records was obtained. A retrospective view of 86 accessible medical records out of Total 110 elective breech caesarean sections was done over a period of one year. This retrospective study was conducted at the gynaecology and obstetrics department at Watford general hospital, Watford United Kingdom. Written consent for the access of medical records was obtained. All women who under went elective caesarean section due to breech presentation were included in the study. Out of a total of 110 elective breech caesarean sections performed, the data on 86 cases was selected for the final analysis. The information gathered included patient's profile, whether patient was informed of risks and benefits of external cephalic version, recognition of obstetric risk factors, external cephalic version performed and its success. Out of total 86 caesarean sections 46 were suitable for external cephalic version of whom 37 cases were offered external cephalic version. Among 37 patients who were offered external cephalic version only 15 patients accepted (22 declined) the procedure. Moreover, it was found that the documentation of risk/benefit explanation of the procedure was inadequate. External cephalic version was not successful in any of the patient. Causes for

  17. Validation Study of the Abbreviated Version of the Lubben Social Network Scale Spanish Translation among Mexican and Mexican-American Older Adults.

    Science.gov (United States)

    Vilar-Compte, Mireya; Vargas-Bustamante, Arturo; Lubben, James

    2018-03-01

    To perform a face validity study of the Spanish version of the Lubben Social Network Scale (LSNS-6) among Mexican and Mexican-American older adults. A cross-national qualitative descriptive approach, based on cognitive survey testing and cross-cultural equivalence analysis, was followed to assess the face validity of the Spanish version of the LSNS-6. Data were collected through 2 focus groups in Los Angeles (LA) and 4 in Mexico City (CDMX). Focus groups followed a semi-structured guide. Eligibility criteria included being 60 years and older, native Spanish speaking, and not suffering from significant cognitive impairments. Four initial focus groups were targeted at conducting a face validity assessment of the initial scale, which led to some modifications. The two remaining focus groups reassessed the face validity of the modified version of the Spanish LSNS-6. 56 older adults participated in the focus groups yielding 152 pages of verbatim transcripts. Analysis of the transcripts identified relevant themes affecting how Mexican and Mexican American older adults understood the items from the LSNS-6 Spanish version, among them: labelling of family members and friends, notions of neighborhood, identifying and counting people, and understanding of "private matters". This led to propose a modified Spanish version of the LSNS-6 following a name generating approach, as well as some language and instruction modifications. The face validity of the modified version suggested a better understanding. The study proposes that the LSNS-6 Spanish version needs to be adapted for its use among Mexican and Mexican American older adults, and we suggest a modified version. This potentially implies that social isolation may be more accurately measured in a vulnerable group of older adults. Further research is needed to ascertain the construct validity and psychometric properties of the modified version.

  18. Converting Taxonomic Descriptions to New Digital Formats

    Directory of Open Access Journals (Sweden)

    Hong Cui

    2008-01-01

    Full Text Available Abstract.--The majority of taxonomic descriptions is currently in print format. The majority of digital descriptions are in formats such as DOC, HTML, or PDF and for human readers. These formats do not convey rich semantics in taxonomic descriptions for computer-aided process. Newer digital formats such as XML and RDF accommodate semantic annotations that allow computers to process the rich semantics on human's behalf, thus open up opportunities for a wide range of innovative usages of taxonomic descriptions, such as searching in more precise and flexible ways, integrating with gnomic and geographic information, generating taxonomic keys automatically, and text data mining and information visualization etc. This paper discusses the challenges in automated conversion of multiple collections of descriptions to XML format and reports an automated system, MARTT. MARTT is a machine-learning system that makes use of training examples to tag new descriptions into XML format. A number of utilities are implemented as solutions to the challenges. The utilities are used to reduce the effort for training example preparation, to facilitate the creation of a comprehensive schema, and to predict system performance on a new collection of descriptions. The system has been tested with several plant and alga taxonomic publications including Flora of China and Flora of North America.

  19. Soft Biometrics; Human Identification Using Comparative Descriptions.

    Science.gov (United States)

    Reid, Daniel A; Nixon, Mark S; Stevenage, Sarah V

    2014-06-01

    Soft biometrics are a new form of biometric identification which use physical or behavioral traits that can be naturally described by humans. Unlike other biometric approaches, this allows identification based solely on verbal descriptions, bridging the semantic gap between biometrics and human description. To permit soft biometric identification the description must be accurate, yet conventional human descriptions comprising of absolute labels and estimations are often unreliable. A novel method of obtaining human descriptions will be introduced which utilizes comparative categorical labels to describe differences between subjects. This innovative approach has been shown to address many problems associated with absolute categorical labels-most critically, the descriptions contain more objective information and have increased discriminatory capabilities. Relative measurements of the subjects' traits can be inferred from comparative human descriptions using the Elo rating system. The resulting soft biometric signatures have been demonstrated to be robust and allow accurate recognition of subjects. Relative measurements can also be obtained from other forms of human representation. This is demonstrated using a support vector machine to determine relative measurements from gait biometric signatures-allowing retrieval of subjects from video footage by using human comparisons, bridging the semantic gap.

  20. GEM Building Taxonomy (Version 2.0)

    Science.gov (United States)

    Brzev, S.; Scawthorn, C.; Charleson, A.W.; Allen, L.; Greene, M.; Jaiswal, Kishor; Silva, V.

    2013-01-01

    This report documents the development and applications of the Building Taxonomy for the Global Earthquake Model (GEM). The purpose of the GEM Building Taxonomy is to describe and classify buildings in a uniform manner as a key step towards assessing their seismic risk, Criteria for development of the GEM Building Taxonomy were that the Taxonomy be relevant to seismic performance of different construction types; be comprehensive yet simple; be collapsible; adhere to principles that are familiar to the range of users; and ultimately be extensible to non-buildings and other hazards. The taxonomy was developed in conjunction with other GEM researchers and builds on the knowledge base from other taxonomies, including the EERI and IAEE World Housing Encyclopedia, PAGER-STR, and HAZUS. The taxonomy is organized as a series of expandable tables, which contain information pertaining to various building attributes. Each attribute describes a specific characteristic of an individual building or a class of buildings that could potentially affect their seismic performance. The following 13 attributes have been included in the GEM Building Taxonomy Version 2.0 (v2.0): 1.) direction, 2.)material of the lateral load-resisting system, 3.) lateral load-resisting system, 4.) height, 5.) date of construction of retrofit, 6.) occupancy, 7.) building position within a block, 8.) shape of the building plan, 9.) structural irregularity, 10.) exterior walls, 11.) roof, 12.) floor, 13.) foundation system. The report illustrates the pratical use of the GEM Building Taxonomy by discussing example case studies, in which the building-specific characteristics are mapped directly using GEM taxonomic attributes and the corresponding taxonomic string is constructed for that building, with "/" slash marks separating attributes. For example, for the building shown to the right, the GEM Taxonomy string is: DX1/MUR+CLBRS+MOCL2/LWAL3/

  1. Space Images for NASA JPL Android Version

    Science.gov (United States)

    Nelson, Jon D.; Gutheinz, Sandy C.; Strom, Joshua R.; Arca, Jeremy M.; Perez, Martin; Boggs, Karen; Stanboli, Alice

    2013-01-01

    This software addresses the demand for easily accessible NASA JPL images and videos by providing a user friendly and simple graphical user interface that can be run via the Android platform from any location where Internet connection is available. This app is complementary to the iPhone version of the application. A backend infrastructure stores, tracks, and retrieves space images from the JPL Photojournal and Institutional Communications Web server, and catalogs the information into a streamlined rating infrastructure. This system consists of four distinguishing components: image repository, database, server-side logic, and Android mobile application. The image repository contains images from various JPL flight projects. The database stores the image information as well as the user rating. The server-side logic retrieves the image information from the database and categorizes each image for display. The Android mobile application is an interfacing delivery system that retrieves the image information from the server for each Android mobile device user. Also created is a reporting and tracking system for charting and monitoring usage. Unlike other Android mobile image applications, this system uses the latest emerging technologies to produce image listings based directly on user input. This allows for countless combinations of images returned. The backend infrastructure uses industry-standard coding and database methods, enabling future software improvement and technology updates. The flexibility of the system design framework permits multiple levels of display possibilities and provides integration capabilities. Unique features of the software include image/video retrieval from a selected set of categories, image Web links that can be shared among e-mail users, sharing to Facebook/Twitter, marking as user's favorites, and image metadata searchable for instant results.

  2. The Warburg effect version 2.0

    Science.gov (United States)

    Menendez, Javier A.; Joven, Jorge; Cufí, Sílvia; Corominas-Faja, Bruna; Oliveras-Ferraros, Cristina; Cuyàs, Elisabet; Martin-Castillo, Begoña; López-Bonet, Eugeni; Alarcón, Tomás; Vazquez-Martin, Alejandro

    2013-01-01

    When fighting cancer, knowledge on metabolism has always been important. Today, it matters more than ever. The restricted cataloging of cancer genomes is quite unlikely to achieve the task of curing cancer, unless it is integrated into metabolic networks that respond to and influence the constantly evolving cancer stem cell (CSC) cellular states. Once the genomic era of carcinogenesis had pushed the 1920s Otto Warburg’s metabolic cancer hypothesis into obscurity for decades, the most recent studies begin to support a new developing paradigm, in which the molecular logic behind the conversion of non-CSCs into CSCs can be better understood in terms of the “metabolic facilitators” and “metabolic impediments” that operate as proximate openings and roadblocks, respectively, for the transcriptional events and signal transduction programs that ultimately orchestrate the intrinsic and/or microenvironmental paths to CSC cellular states. Here we propose that a profound understanding of how human carcinomas install a proper “Warburg effect version 2.0” allowing them to “run” the CSCs’ “software” programs should guide a new era of metabolo-genomic-personalized cancer medicine. By viewing metabolic reprogramming of CSCs as an essential characteristic that allows dynamic, multidimensional and evolving cancer populations to compete successfully for their expansion on the organism, we now argue that CSCs bioenergetics might be another cancer hallmark. A definitive understanding of metabolic reprogramming in CSCs may complement or to some extent replace, the 30-y-old paradigm of targeting oncogenes to treat human carcinomas, because it can be possible to metabolically create non-permissive or “hostile” metabotypes to prevent the occurrence of CSC cellular states with tumor- and metastasis-initiating capacity. PMID:23549172

  3. GCFM Users Guide Revision for Model Version 5.0

    Energy Technology Data Exchange (ETDEWEB)

    Keimig, Mark A.; Blake, Coleman

    1981-08-10

    This paper documents alterations made to the MITRE/DOE Geothermal Cash Flow Model (GCFM) in the period of September 1980 through September 1981. Version 4.0 of GCFM was installed on the computer at the DOE San Francisco Operations Office in August 1980. This Version has also been distributed to about a dozen geothermal industry firms, for examination and potential use. During late 1980 and 1981, a few errors detected in the Version 4.0 code were corrected, resulting in Version 4.1. If you are currently using GCFM Version 4.0, it is suggested that you make the changes to your code that are described in Section 2.0. User's manual changes listed in Section 3.0 and Section 4.0 should then also be made.

  4. Aircraft/Air Traffic Management Functional Analysis Model: Technical Description. 2.0

    Science.gov (United States)

    Etheridge, Melvin; Plugge, Joana; Retina, Nusrat

    1998-01-01

    The Aircraft/Air Traffic Management Functional Analysis Model, Version 2.0 (FAM 2.0), is a discrete event simulation model designed to support analysis of alternative concepts in air traffic management and control. FAM 2.0 was developed by the Logistics Management Institute (LMI) under a National Aeronautics and Space Administration (NASA) contract. This document provides a technical description of FAM 2.0 and its computer files to enable the modeler and programmer to make enhancements or modifications to the model. Those interested in a guide for using the model in analysis should consult the companion document, Aircraft/Air Traffic Management Functional Analysis Model, Version 2.0 Users Manual.

  5. The transportation operations system: A description

    International Nuclear Information System (INIS)

    Best, R.E.; Danese, F.L.; Dixon, L.D.; Peterson, R.W.; Pope, R.B.

    1990-01-01

    This paper presents a description of the system for transporting radioactive waste that may be deployed to accomplish the assigned system mission, which includes accepting spent nuclear fuel (SNF) and high-level radioactive waste (HLW) from waste generator sites and transporting them to the FWMS destination facilities. The system description presented here contains, in part, irradiated fuel and waste casks, ancillary equipments, truck, rail, and barge transporters, cask and vehicle traffic management organizations, maintenance facilities, and other operations elements. The description is for a fully implemented system, which is not expected to be achieved, however, until several years after initial operations. 6 figs

  6. Crosswalking EAD: Collaboration in Archival Description

    Directory of Open Access Journals (Sweden)

    Amy McCrory

    2005-09-01

    Full Text Available Different library departments must work together, both formally and informally, in implementing encoded archival description and in repackaging descriptive information about archival collections to other formats, particularly machine-readable cataloging. The authors, one a technical services librarian and the other a special collections archivist, describe their experiences collaborating in these processes at The Ohio State University. Although other institutions may differ in their organizational structure, the authors hope to provide technical guidance, as well as a model of collaboration between archivists and technical services personnel. Careful dialogue and planning are essential to transcend the traditional divide between archival and library descriptive practices and systems.

  7. 1995 Baseline solid waste management system description

    International Nuclear Information System (INIS)

    Anderson, G.S.; Konynenbelt, H.S.

    1995-09-01

    This provides a detailed solid waste system description that documents the treatment, storage, and disposal (TSD) strategy for managing Hanford's solid low-level waste, low-level mixed waste, transuranic and transuranic mixed waste, and greater-than-Class III waste. This system description is intended for use by managers of the solid waste program, facility and system planners, as well as system modelers. The system description identifies the TSD facilities that constitute the solid waste system and defines these facilities' interfaces, schedules, and capacities. It also provides the strategy for treating each of the waste streams generated or received by the Hanford Site from generation or receipt through final destination

  8. Formalizing the Problem of Music Description

    DEFF Research Database (Denmark)

    Sturm, Bob L.; Bardeli, Rolf; Langlois, Thibault

    2015-01-01

    The lack of a formalism for “the problem of music descrip- tion” results in, among other things: ambiguity in what problem a music description system must address, how it should be evaluated, what criteria define its success, and the paradox that a music description system can reproduce the “ground...... truth” of a music dataset without attending to the music it contains. To address these issues, we formal- ize the problem of music description such that all elements of an instance of it are made explicit. This can thus inform the building of a system, and how it should be evaluated in a meaningful way...

  9. Information resource description creating and managing metadata

    CERN Document Server

    Hider, Philip

    2012-01-01

    An overview of the field of information organization that examines resource description as both a product and process of the contemporary digital environment.This timely book employs the unifying mechanism of the semantic web and the resource description framework to integrate the various traditions and practices of information and knowledge organization. Uniquely, it covers both the domain-specific traditions and practices and the practices of the ?metadata movement' through a single lens ? that of resource description in the broadest, semantic web sense.This approach more readily accommodate

  10. Enseignement Technique CERN 2004 - French version only

    CERN Document Server

    Monique Duval

    2004-01-01

    Instructor-led WBTechT Course for Microsoft Applications Si vous désirez participer à l'un des cours suivants, veuillez en discuter avec votre superviseur et vous inscrire électroniquement en direct depuis les pages de description des cours dans le Web que vous trouvez à l'adresse : http://www.cern.ch/Training/ ou remplissez une « demande de formation » disponible auprès du Secrétariat de votre Division ou de votre DTO (Délégué divisionnaire à la formation). Les places seront attribuées dans l'ordre de réception des inscriptions. ENSEIGNEMENT TECHNIQUE Monique Duval tél. 74924 technical.training@cern.ch Instructor-led WBTechT Course for Microsoft Applications Aimeriez-vous améliorer vos connaissances des applications de Microsoft Office ou d'Outlook ? Un nouveau cours, combinant un cours avec professeur et ...

  11. Smart Grid Interoperability Maturity Model Beta Version

    Energy Technology Data Exchange (ETDEWEB)

    Widergren, Steven E.; Drummond, R.; Giroti, Tony; Houseman, Doug; Knight, Mark; Levinson, Alex; longcore, Wayne; Lowe, Randy; Mater, J.; Oliver, Terry V.; Slack, Phil; Tolk, Andreas; Montgomery, Austin

    2011-12-02

    The GridWise Architecture Council was formed by the U.S. Department of Energy to promote and enable interoperability among the many entities that interact with the electric power system. This balanced team of industry representatives proposes principles for the development of interoperability concepts and standards. The Council provides industry guidance and tools that make it an available resource for smart grid implementations. In the spirit of advancing interoperability of an ecosystem of smart grid devices and systems, this document presents a model for evaluating the maturity of the artifacts and processes that specify the agreement of parties to collaborate across an information exchange interface. You are expected to have a solid understanding of large, complex system integration concepts and experience in dealing with software component interoperation. Those without this technical background should read the Executive Summary for a description of the purpose and contents of the document. Other documents, such as checklists, guides, and whitepapers, exist for targeted purposes and audiences. Please see the www.gridwiseac.org website for more products of the Council that may be of interest to you.

  12. Translation and Validation of a Chinese Version of the Stroke Self-Efficacy Questionnaire in Community-Dwelling Stroke Survivors.

    Science.gov (United States)

    Lo, Suzanne Hoi Shan; Chang, Anne Marie; Chau, Janita Pak Chun

    2016-06-01

    Self-efficacy is a significant factor influencing stroke survivors' participation in self-care and outcomes. The Stroke Self-Efficacy Questionnaire (SSEQ) is a stroke-specific measure of stroke survivors' self-efficacy in performing daily functional activities and self-management. However, there has been no Chinese version of the questionnaire. The current study aims to examine the reliability and validity of a translated Chinese version of SSEQ (SSEQ-C). The English version of SSEQ has been translated into Chinese. A descriptive study was conducted. A convenience sample of 135 Chinese stroke survivors (mean age 58.9, SD 9.75) was recruited from three community centers and a stroke support group. Eligible participants completed the SSEQ-C, and the Chinese versions of General Self-Efficacy Scale (GSES), Frenchay Activities Index (FAI), and Stroke-Specific Quality of Life Scale (SSQOL). Thirty of the participants completed the questionnaires at baseline and 4 weeks afterwards. SSEQ-C had a high internal consistency (Cronbach's α 0.92). Test-retest reliability was satisfactory with the intraclass correlation coefficient of the total scale 0.52. Positive correlations were found between the total scores of SSEQ-C, GSES, FAI, and SSQOL (Spearman's ρ: 0.48-0.68, p self-efficacy in managing post-stroke condition. More studies are warranted to confirm the two-factor model of the questionnaire.

  13. ASSESSMENT OF RADIONUCLIDES DATABASES IN CAP88 MAINFRAME VERSION 1.0 AND WINDOWS-BASED VERSION 3.0

    Energy Technology Data Exchange (ETDEWEB)

    Farfan, E.; Lee, P.; Jannik, T.; Donnelly, E.

    2008-09-16

    In this study the radionuclide databases for two versions of the Clean Air Act Assessment Package-1988 (CAP88) computer model were assessed in detail. CAP88 estimates radiation dose and the risk of health effects to human populations from radionuclide emissions to air. This program is used by several Department of Energy (DOE) facilities to comply with National Emission Standards for Hazardous Air Pollutants (NESHAP) regulations. CAP88 Mainframe, referred to as Version 1.0 on the Environmental Protection Agency (EPA) website (http://www.epa.gov/radiation/assessment/CAP88/), was the very first CAP88 version released in 1988. Some DOE facilities including the Savannah River Site still employ this version (1.0) while others use the more user-friendly personal computer Windows-based Version 3.0 released in December 2007. Version 1.0 uses the program RADRISK based on International Commission on Radiological Protection (ICRP) Publication 30 as its radionuclide database. Version 3.0 uses half-life, dose and risk factor values based on Federal Guidance Report 13. Differences in these values could cause different results for the same input exposure data (same scenario), depending on which version of CAP88 is used. Consequently, the differences between the two versions are being assessed in detail at Savannah River National Laboratory. The version 1.0 and 3.0 database files contain 496 and 838 radionuclides, respectively, and though one would expect the newer version to include all the 496 radionuclides, thirty-five radionuclides are listed in version 1.0 that are not included in version 3.0. The majority of these has either extremely short or long half-lives or is no longer in production; however, some of the short-lived radionuclides might produce progeny of great interest at DOE sites. In addition, one hundred and twenty-two radionuclides were found to have different half-lives in the two versions, with 21 over 3 percent different and 12 over 10 percent different.

  14. Assessment of radionuclide databases in CAP88 mainframe version 1.0 and Windows-based version 3.0.

    Science.gov (United States)

    LaBone, Elizabeth D; Farfán, Eduardo B; Lee, Patricia L; Jannik, G Timothy; Donnelly, Elizabeth H; Foley, Trevor Q

    2009-09-01

    In this study the radionuclide databases for two versions of the Clean Air Act Assessment Package-1988 (CAP88) computer model were assessed in detail. CAP88 estimates radiation dose and the risk of health effects to human populations from radionuclide emissions to air. This program is used by several U.S. Department of Energy (DOE) facilities to comply with National Emission Standards for Hazardous Air Pollutants regulations. CAP88 Mainframe, referred to as version 1.0 on the U.S. Environmental Protection Agency Web site (http://www.epa.gov/radiation/assessment/CAP88/), was the very first CAP88 version released in 1988. Some DOE facilities including the Savannah River Site still employ this version (1.0) while others use the more user-friendly personal computer Windows-based version 3.0 released in December 2007. Version 1.0 uses the program RADRISK based on International Commission on Radiological Protection Publication 30 as its radionuclide database. Version 3.0 uses half-life, dose, and risk factor values based on Federal Guidance Report 13. Differences in these values could cause different results for the same input exposure data (same scenario), depending on which version of CAP88 is used. Consequently, the differences between the two versions are being assessed in detail at Savannah River National Laboratory. The version 1.0 and 3.0 database files contain 496 and 838 radionuclides, respectively, and though one would expect the newer version to include all the 496 radionuclides, 35 radionuclides are listed in version 1.0 that are not included in version 3.0. The majority of these has either extremely short or long half-lives or is no longer in production; however, some of the short-lived radionuclides might produce progeny of great interest at DOE sites. In addition, 122 radionuclides were found to have different half-lives in the two versions, with 21 over 3 percent different and 12 over 10 percent different.

  15. DOE-2 sample run book: Version 2.1E

    Energy Technology Data Exchange (ETDEWEB)

    Winkelmann, F.C.; Birdsall, B.E.; Buhl, W.F.; Ellington, K.L.; Erdem, A.E. [Lawrence Berkeley Lab., CA (United States); Hirsch, J.J.; Gates, S. [Hirsch (James J.) and Associates, Camarillo, CA (United States)

    1993-11-01

    The DOE-2 Sample Run Book shows inputs and outputs for a variety of building and system types. The samples start with a simple structure and continue to a high-rise office building, a medical building, three small office buildings, a bar/lounge, a single-family residence, a small office building with daylighting, a single family residence with an attached sunspace, a ``parameterized`` building using input macros, and a metric input/output example. All of the samples use Chicago TRY weather. The main purpose of the Sample Run Book is instructional. It shows the relationship of LOADS-SYSTEMS-PLANT-ECONOMICS inputs, displays various input styles, and illustrates many of the basic and advanced features of the program. Many of the sample runs are preceded by a sketch of the building showing its general appearance and the zoning used in the input. In some cases we also show a 3-D rendering of the building as produced by the program DrawBDL. Descriptive material has been added as comments in the input itself. We find that a number of users have loaded these samples onto their editing systems and use them as ``templates`` for creating new inputs. Another way of using them would be to store various portions as files that can be read into the input using the {number_sign}{number_sign} include command, which is part of the Input Macro feature introduced in version DOE-2.lD. Note that the energy rate structures here are the same as in the DOE-2.lD samples, but have been rewritten using the new DOE-2.lE commands and keywords for ECONOMICS. The samples contained in this report are the same as those found on the DOE-2 release files. However, the output numbers that appear here may differ slightly from those obtained from the release files. The output on the release files can be used as a check set to compare results on your computer.

  16. Modelling object typicality in description logics

    CSIR Research Space (South Africa)

    Britz, K

    2009-12-01

    Full Text Available The authors present a semantic model of typicality of concept members in description logics (DLs) that accords well with a binary, globalist cognitive model of class membership and typicality. The authors define a general preferential semantic...

  17. Scripps Sediment Description File- OCSEAP Portion

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Scripps Institution of Oceanography compiled descriptions of sediment samples in the Alaskan Outer Continental Shelf area, funded through the NOAA Outer...

  18. The Year's Work in Descriptive Cataloging, 1992.

    Science.gov (United States)

    Knutson, Gunnar

    1993-01-01

    Examines the descriptive cataloging literature of 1992. Topics discussed include cataloging simplification and improved practices; artificial intelligence and expert systems; Anglo-American Cataloging Rules, MARC format, and cataloging standards; authority control and bibliographic maintenance; retrospective conversion; romanization and…

  19. SIO Ferromanganese Nodule Description file - IDOE Portion

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Scripps Institution of Oceanography compiled descriptions of sediment samples related to ferromanganese deposits, funded through the International Decade of...

  20. Integrated Visualisation and Description of Complex Systems

    National Research Council Canada - National Science Library

    Goodburn, D

    1999-01-01

    .... Guided by a conceptual model of a description process that is driven by user information needs within a domain context, the approach incorporates the use of novel visualization techniques based...

  1. Reachability modules for the description logic SRIQ

    CSIR Research Space (South Africa)

    Nortje, R

    2013-12-01

    Full Text Available In this paper we investigate module extraction for the Description Logic SRIQ. We formulate modules in terms of the reachability problem for directed hypergraphs. Using inseperability relations, we investigate the module-theoretic properties...

  2. Mining skeletal phenotype descriptions from scientific literature.

    Directory of Open Access Journals (Sweden)

    Tudor Groza

    Full Text Available Phenotype descriptions are important for our understanding of genetics, as they enable the computation and analysis of a varied range of issues related to the genetic and developmental bases of correlated characters. The literature contains a wealth of such phenotype descriptions, usually reported as free-text entries, similar to typical clinical summaries. In this paper, we focus on creating and making available an annotated corpus of skeletal phenotype descriptions. In addition, we present and evaluate a hybrid Machine Learning approach for mining phenotype descriptions from free text. Our hybrid approach uses an ensemble of four classifiers and experiments with several aggregation techniques. The best scoring technique achieves an F-1 score of 71.52%, which is close to the state-of-the-art in other domains, where training data exists in abundance. Finally, we discuss the influence of the features chosen for the model on the overall performance of the method.

  3. Some Dictionary Descriptions of Grammatical Structure

    African Journals Online (AJOL)

    Some Dictionary Descriptions of. Grammatical Structure. William Branford, Department of Linguistics, University of Cape Town opsomming: Enkele woordeboekbeskrywings van grammatikale struk- tuur. Hierdie artikel ondersoek enkele aspekte van die behandeling van grammatikale struktuur in vier resente woordeboeke ...

  4. Defeasible inheritance-based description logics

    CSIR Research Space (South Africa)

    Casini, G

    2013-01-01

    Full Text Available of Artificial Intelligence Research 2013 Defeasible Inheritance-based Description Logics Giovanni Casini GCASINI@CSIR.CO.ZA Centre for Artificial Intelligence Research (CAIR), CSIR Meraka Institute and UKZN, South Africa Umberto Straccia UMBERTO...

  5. RDA resource, description and access, 2013 revision

    CERN Document Server

    2013-01-01

    This full-text print version of RDA offers a snapshot that serves as an offline access point to help solo and part-time cataloguers evaluate RDA, as well as to support training and classroom use in any size institution. An index is included.

  6. Psychometric evaluation of the Borderline Personality Disorder Severity Index-IV--adolescent version and parent version.

    Science.gov (United States)

    Schuppert, H Marieke; Bloo, Josephine; Minderaa, Ruud B; Emmelkamp, Paul M G; Nauta, Maaike H

    2012-08-01

    The Borderline Personality Disorder Severity Index-IV-adolescent and parent versions (BPDSI-IV-ado/p) are DSM-IV based semi-structured interviews for the assessment of the severity of symptoms of borderline personality disorder (BPD) in adolescents. The present study evaluates the psychometric properties of the BPDSI-IV-ado/p. The interviews were administered to 122 adolescents, aged 14-19 years and their parents/caretakers who were referred to mental health centres for emotion regulation problems, and to 45 healthy controls. The interrater reliability and internal consistency of all nine subscales (following the nine BPD symptoms in DSM-IV) proved to be good to excellent. Discriminant, concurrent, and construct validity were satisfactory. Cut-off scores that optimize sensitivity and specificity were derived. Informant agreement between adolescents and parents/caretakers was modest. The results of this study suggest that the BPDSI-IV adolescent and parent versions are valid and reliable instruments for the assessment of BPD symptom severity in adolescents.

  7. Portuguese version of the PTSD Checklist-Military Version (PCL-M - II: diagnostic utility

    Directory of Open Access Journals (Sweden)

    Teresa Carvalho

    2015-03-01

    Full Text Available Objective: War veterans are at high risk of developing posttraumatic stress disorder (PTSD, and the development of brief self-report instruments that enable screening for PTSD in this population is crucial. The PTSD Checklist-Military Version (PCL-M is widely used for this purpose. This study sought to explore the diagnostic utility of the Portuguese version of the PCL-M. Methods: The participants were 86 Portuguese Colonial War veterans (42 with a PTSD diagnosis and 44 without PTSD. Participants completed a self-report instrument designed to collect sociodemographic data, the PCL-M, and the Clinician-Administered PTSD Scale (CAPS. Results: The area under the receiver operator characteristic (ROC curve showed excellent discriminant ability between subjects with and without PTSD (AUC = 0.94. To achieve a positive PTSD diagnosis, an optimal cutoff point of 49 for the PCL-M total score and cutoff points for each of its 17 items are recommended. Conclusions: This work is a relevant contribution for research and clinical practice in the vast population of Portuguese Colonial War veterans. Use of the PCL-M as a screening tool for PTSD symptoms will allow easier, resource-aware targeting of subjects with a potential PTSD diagnosis, adding to the improvement of public health in Portugal.

  8. Users guide for ENVSTD program Version 2. 0 and LTGSTD program Version 2. 0

    Energy Technology Data Exchange (ETDEWEB)

    Crawley, D.B.; Riesen, P.K.; Briggs, R.S.

    1989-02-01

    On January 30, 1989, the US Department of Energy (DOE) promulgated 10 CFR Part 435, Subpart A, an Interim Rule entitled ''Energy Conservation Voluntary Performance Standards for New Commercial and Multi-Family High Rise Residential Buildings; Mandatory for New Federal Buildings.'' As a consequence, federal agencies must design all future federal commercial and multifamily high rise residential buildings in accordance with the Standards, or show that their current standards already meet or exceed the energy-efficiency requirements of the Standards. Although these newly enacted Standards do not regulate the design of nonfederal buildings, DOE recommends that all design professionals use the Standards as guidelines for designing energy-conserving buildings. To encourage private sector use, the Standards were presented in the January 30, 1989, Federal Register in the format typical of commercial standards rather than a federal regulation. As a further help, DOE supported the development of various microcomputer programs to ease the use of the Standards. Two of these programs/emdash/ENVSTD (Version 2.0) and LTGSTD (Version 2.0)/emdash/are detailed in this users guide and provided on the accompanying diskette. This package, developed by Pacific Northwest Laboratory (PNL), is intended to facilitate the designer's use of the Standards dealing specifically with a building's envelope and lighting system designs. Using these programs will greatly simplify the designer's task of performing the sometimes complex calculations needed to determine a design's compliance with the Standards. 3 refs., 6 figs.

  9. Science Opportunity Analyzer (SOA) Version 8

    Science.gov (United States)

    Witoff, Robert J.; Polanskey, Carol A.; Aguinaldo, Anna Marie A.; Liu, Ning; Hofstadter, Mark D.

    2013-01-01

    SOA allows scientists to plan spacecraft observations. It facilitates the identification of geometrically interesting times in a spacecraft s orbit that a user can use to plan observations or instrument-driven spacecraft maneuvers. These observations can then be visualized multiple ways in both two- and three-dimensional views. When observations have been optimized within a spacecraft's flight rules, the resulting plans can be output for use by other JPL uplink tools. Now in its eighth major version, SOA improves on these capabilities in a modern and integrated fashion. SOA consists of five major functions: Opportunity Search, Visualization, Observation Design, Constraint Checking, and Data Output. Opportunity Search is a GUI-driven interface to existing search engines that can be used to identify times when a spacecraft is in a specific geometrical relationship with other bodies in the solar system. This function can be used for advanced mission planning as well as for making last-minute adjustments to mission sequences in response to trajectory modifications. Visualization is a key aspect of SOA. The user can view observation opportunities in either a 3D representation or as a 2D map projection. Observation Design allows the user to orient the spacecraft and visualize the projection of the instrument field of view for that orientation using the same views as Opportunity Search. Constraint Checking is provided to validate various geometrical and physical aspects of an observation design. The user has the ability to easily create custom rules or to use official project-generated flight rules. This capability may also allow scientists to easily assess the cost to science if flight rule changes occur. Data Output allows the user to compute ancillary data related to an observation or to a given position of the spacecraft along its trajectory. The data can be saved as a tab-delimited text file or viewed as a graph. SOA combines science planning functionality unique to

  10. Moral Judgments as Descriptions of Institutional Facts

    OpenAIRE

    Ferber, Rafael

    1994-01-01

    It deals with the question of what a moral judgment is. On the one hand, a satisfactory theory of moral judgments must take into account the descriptive character of moral judgments and the realistic language of morals. On the other hand, it must also meet the non-descriptive character of moral judgments that consists in the recommending or condemning element and in the fact that normative statements are derived from moral judgments. However, cognitivism and emotivism or “normativism” are...

  11. Description of Measurements on Biogas Stations

    Directory of Open Access Journals (Sweden)

    Ladislav Novosád

    2016-08-01

    Full Text Available This paper focuses mainly on performance analysis for three biogas stations situated within the territory of the Czech Republic. This paper contains basic details of the individual biogas stations as well as description of their types. It also refers to the general description of the measurement gauge involved, with specifications of its potential use. The final part of this paper deals with the analysis of course data obtained, with special regard to voltage, current, active power and reactive power data.

  12. A Formal Description of Problem Frames

    OpenAIRE

    Souleymane KOUSSOUBE; Roger NOUSSI; Balira O. KONFE

    2014-01-01

    Michael Jackson defines a Problem Frame as a mean to describe and classify software development problems. The initial description of problem Frames is essentially graphical. A weakness of this proposal is the lack of formal specification allowing efficient reasoning tools. This paper deals with Problem Frames’ formal specification with Description Logics. We first propose a formal terminology of Problem Frames leading to the specification of a Problem Frames’ TBOX and a specific problem’s ABO...

  13. The maximum entropy technique. System's statistical description

    International Nuclear Information System (INIS)

    Belashev, B.Z.; Sulejmanov, M.K.

    2002-01-01

    The maximum entropy technique (MENT) is applied for searching the distribution functions of physical values. MENT takes into consideration the demand of maximum entropy, the characteristics of the system and the connection conditions, naturally. It is allowed to apply MENT for statistical description of closed and open systems. The examples in which MENT had been used for the description of the equilibrium and nonequilibrium states and the states far from the thermodynamical equilibrium are considered

  14. A Descriptive Study on the Military Leadership

    OpenAIRE

    Muhammed Kürşad Özlen; Anes Zukic

    2013-01-01

    This study provides more complete deliberation of the current practices of leadership in the surveyed Armed Forces. This study aims to descriptively identify the degree of motivating military leadership, military environment, characteristics of military leaders and military leadership benefits in the selected army. The research method conducted was based on survey of 200 respondents in Armed Forces of Bosnia and Herzegovina and descriptive analyses of the survey data. According to the results...

  15. What Makes a Good App Description?

    OpenAIRE

    Jiang, He; Ma, Hongjing; Ren, Zhilei; Zhang, Jingxuan; Li, Xiaochen

    2017-01-01

    In the Google Play store, an introduction page is associated with every mobile application (app) for users to acquire its details, including screenshots, description, reviews, etc. However, it remains a challenge to identify what items influence users most when downloading an app. To explore users' perspective, we conduct a survey to inquire about this question. The results of survey suggest that the participants pay most attention to the app description which gives users a quick overview of ...

  16. Audio description as an accessibility enhancer

    OpenAIRE

    Martins, Cláudia Susana Nunes

    2012-01-01

    Audio description for the blind and visually-impaired has been around since people have described what is seen. Throughout time, it has evolved and developed in different contexts, starting with daily life, moving into the cinema and television, then across other performing arts, museums and galleries, historical sites and public places. Audio description is above all an issue of accessibility and of providing visually-impaired people with the same rights to have access to culture, e...

  17. Statistics for dental researchers: descriptive statistics

    OpenAIRE

    Mohammad Reza Baneshi PhD; Amir Reza Ghassemi DDS; Arash Shahravan DDS, MS

    2012-01-01

    Descriptive statistics is the process of summarizing gathered raw data from a research and creating useful statistics,which help the better understanding of data. According to the types of variables, which consist of qualitative andquantitative variables, some descriptive statistics have been introduced. Frequency percentage is used in qualitativedata, and mean, median, mode, standard deviation, standard error, variance, and range are some of the statistics whichare used in quantitative data....

  18. Effective Conformal Descriptions of Black Hole Entropy

    Directory of Open Access Journals (Sweden)

    Steven Carlip

    2011-07-01

    Full Text Available It is no longer considered surprising that black holes have temperatures and entropies. What remains surprising, though, is the universality of these thermodynamic properties: their exceptionally simple and general form, and the fact that they can be derived from many very different descriptions of the underlying microscopic degrees of freedom. I review the proposal that this universality arises from an approximate conformal symmetry, which permits an effective “conformal dual” description that is largely independent of the microscopic details.

  19. Description and search labor for information retrieval

    OpenAIRE

    Warner, Julian

    2007-01-01

    Selection power is taken as the fundamental value for information retrieval systems. Selection power is regarded as produced by selection labor, which itself separates historically into description and search labor. As forms of mental labor, description and search labor participate in the conditions for labor and for mental labor. Concepts and distinctions applicable to physical and mental labor are indicated, introducing the necessity of labor for survival, the idea of technology as a human ...

  20. CLIPS - C LANGUAGE INTEGRATED PRODUCTION SYSTEM (MACINTOSH VERSION)

    Science.gov (United States)

    Culbert, C.

    1994-01-01

    The C Language Integrated Production System, CLIPS, is a shell for developing expert systems. It is designed to allow artificial intelligence research, development, and delivery on conventional computers. The primary design goals for CLIPS are portability, efficiency, and functionality. For these reasons, the program is written in C. CLIPS meets or outperforms most micro- and minicomputer based artificial intelligence tools. CLIPS is a forward chaining rule-based language. The program contains an inference engine and a language syntax that provide a framework for the construction of an expert system. It also includes tools for debugging an application. CLIPS is based on the Rete algorithm, which enables very efficient pattern matching. The collection of conditions and actions to be taken if the conditions are met is constructed into a rule network. As facts are asserted either prior to or during a session, CLIPS pattern-matches the number of fields. Wildcards and variables are supported for both single and multiple fields. CLIPS syntax allows the inclusion of externally defined functions (outside functions which are written in a language other than CLIPS). CLIPS itself can be embedded in a program such that the expert system is available as a simple subroutine call. Advanced features found in CLIPS version 4.3 include an integrated microEMACS editor, the ability to generate C source code from a CLIPS rule base to produce a dedicated executable, binary load and save capabilities for CLIPS rule bases, and the utility program CRSV (Cross-Reference, Style, and Verification) designed to facilitate the development and maintenance of large rule bases. Five machine versions are available. Each machine version includes the source and the executable for that machine. The UNIX version includes the source and binaries for IBM RS/6000, Sun3 series, and Sun4 series computers. The UNIX, DEC VAX, and DEC RISC Workstation versions are line oriented. The PC version and the Macintosh

  1. CLIPS - C LANGUAGE INTEGRATED PRODUCTION SYSTEM (IBM PC VERSION)

    Science.gov (United States)

    Riley, G.

    1994-01-01

    The C Language Integrated Production System, CLIPS, is a shell for developing expert systems. It is designed to allow artificial intelligence research, development, and delivery on conventional computers. The primary design goals for CLIPS are portability, efficiency, and functionality. For these reasons, the program is written in C. CLIPS meets or outperforms most micro- and minicomputer based artificial intelligence tools. CLIPS is a forward chaining rule-based language. The program contains an inference engine and a language syntax that provide a framework for the construction of an expert system. It also includes tools for debugging an application. CLIPS is based on the Rete algorithm, which enables very efficient pattern matching. The collection of conditions and actions to be taken if the conditions are met is constructed into a rule network. As facts are asserted either prior to or during a session, CLIPS pattern-matches the number of fields. Wildcards and variables are supported for both single and multiple fields. CLIPS syntax allows the inclusion of externally defined functions (outside functions which are written in a language other than CLIPS). CLIPS itself can be embedded in a program such that the expert system is available as a simple subroutine call. Advanced features found in CLIPS version 4.3 include an integrated microEMACS editor, the ability to generate C source code from a CLIPS rule base to produce a dedicated executable, binary load and save capabilities for CLIPS rule bases, and the utility program CRSV (Cross-Reference, Style, and Verification) designed to facilitate the development and maintenance of large rule bases. Five machine versions are available. Each machine version includes the source and the executable for that machine. The UNIX version includes the source and binaries for IBM RS/6000, Sun3 series, and Sun4 series computers. The UNIX, DEC VAX, and DEC RISC Workstation versions are line oriented. The PC version and the Macintosh

  2. System requirements and design description for the document basis database interface (DocBasis)

    International Nuclear Information System (INIS)

    Lehman, W.J.

    1997-01-01

    This document describes system requirements and the design description for the Document Basis Database Interface (DocBasis). The DocBasis application is used to manage procedures used within the tank farms. The application maintains information in a small database to track the document basis for a procedure, as well as the current version/modification level and the basis for the procedure. The basis for each procedure is substantiated by Administrative, Technical, Procedural, and Regulatory requirements. The DocBasis user interface was developed by Science Applications International Corporation (SAIC)

  3. The validity and reliability of tinnitus handicap inventory Thai version.

    Science.gov (United States)

    Limviriyakul, Siriporn; Supavanich, Walop

    2012-11-01

    Demonstrate the reliability and validity of the Tinnitus Handicap Inventory Thai Version (THI-T), a self-report measure of tinnitus. A cross-sectional psychometric validation study was used to determine internal consistency reliability and validity of the Tinnitus Handicap Inventory Thai Version at the Otoneurology clinic at Tertiary care center The cross-cultural adaptation of the Tinnitus Handicapped Inventory English version (Newman et al, 1996) was translated into Thai version following the steps indicated by Guillemin et al. The reliability was constructed by using Cronbach's coefficient alpha. The validity was analyzed by the correlation between Tinnitus Handicap Inventory Thai version and the 36-items short form health survey and visual analog scale using Spearman and Pearson test. The result showed good internal consistency reliabilities of total, functional, emotional, and catastrophic scale (a = 0.902, 0.804, 0.831 and 0.661, respectively) of Tinnitus Handicap Inventory Thai Version. Spearman correlation showed the significant correlation of Tinnitus Handicap Inventory to 36-items short form health survey and visual analog scale. Tinnitus Handicap Inventory Thai Version will be a vigorous tool in evaluating tinnitus patients as well as monitoring the progress of their symptoms.

  4. Qualitative Descriptive Methods in Health Science Research.

    Science.gov (United States)

    Colorafi, Karen Jiggins; Evans, Bronwynne

    2016-07-01

    The purpose of this methodology paper is to describe an approach to qualitative design known as qualitative descriptive that is well suited to junior health sciences researchers because it can be used with a variety of theoretical approaches, sampling techniques, and data collection strategies. It is often difficult for junior qualitative researchers to pull together the tools and resources they need to embark on a high-quality qualitative research study and to manage the volumes of data they collect during qualitative studies. This paper seeks to pull together much needed resources and provide an overview of methods. A step-by-step guide to planning a qualitative descriptive study and analyzing the data is provided, utilizing exemplars from the authors' research. This paper presents steps to conducting a qualitative descriptive study under the following headings: describing the qualitative descriptive approach, designing a qualitative descriptive study, steps to data analysis, and ensuring rigor of findings. The qualitative descriptive approach results in a summary in everyday, factual language that facilitates understanding of a selected phenomenon across disciplines of health science researchers. © The Author(s) 2016.

  5. Graphic Description: The Mystery of Ibn Khafaja\\'s Success in Description

    Directory of Open Access Journals (Sweden)

    جواد رنجبر

    2009-12-01

    Full Text Available Graphic Description:   The Mystery of Ibn Khafaja's Success in Description    Ali Bagher Taheriniya *  Javad Ranjbar **      Abstract Ibn Khafaja is one of the poets and men of letters in Spain. He is titled to Sanobari of Spain. He is one of the masters of description. Hence, the analysis of successful techniques he has used in the descriptive art could illuminate the way for others. Al-Taswir al-harfi (graphic description is a term which denotes the highest and most detailed poems. On this basis, the best descriptive poem is one which is closer to a painting. He has used some elements called conforming elements of description which contain: imagination, feeling, faculty, and dialogue as well as three other elements: to be inborn in description, enchanting nature and convenient life. This article is going to give an analysis of the reasons for Ibn Khafaja’s success in description and portrait making.   Key words: Ibn Khafaja, poetry, description, portrait   * Associate Professor, Bu Ali Sina University of Hamadan E-mail: bTaheriniya@yahoo.com  ** M.A. in Arabic Language and Literature

  6. Semantic diff as the basis for knowledge base versioning

    CSIR Research Space (South Africa)

    Franconi, E

    2010-05-01

    Full Text Available of appropriate normal forms for the respective logic. In that sense, the approach by Kontchakov et al. and Konev et al. can be seen as a special case of ours. Jime´nez-Ruiz et al. address the problem of maintaining multiple versions of an ontology by adapting... the Concur- rent Versioning paradigm from software engineering to the ontology versioning case (Jime´nez-Ruiz et al. 2009). Al- though their motivations and ours overlap to some extent, they focus on the definition of a high-level architecture...

  7. Model Adequacy Analysis of Matching Record Versions in Nosql Databases

    Directory of Open Access Journals (Sweden)

    E. V. Tsviashchenko

    2015-01-01

    Full Text Available The article investigates a model of matching record versions. The goal of this work is to analyse the model adequacy. This model allows estimating a user’s processing time distribution of the record versions and a distribution of the record versions count. The second option of the model was used, according to which, for a client the time to process record versions depends explicitly on the number of updates, performed by the other users between the sequential updates performed by a current client. In order to prove the model adequacy the real experiment was conducted in the cloud cluster. The cluster contains 10 virtual nodes, provided by DigitalOcean Company. The Ubuntu Server 14.04 was used as an operating system (OS. The NoSQL system Riak was chosen for experiments. In the Riak 2.0 version and later provide “dotted vector versions” (DVV option, which is an extension of the classic vector clock. Their use guarantees, that the versions count, simultaneously stored in DB, will not exceed the count of clients, operating in parallel with a record. This is very important while conducting experiments. For developing the application the java library, provided by Riak, was used. The processes run directly on the nodes. In experiment two records were used. They are: Z – the record, versions of which are handled by clients; RZ – service record, which contains record update counters. The application algorithm can be briefly described as follows: every client reads versions of the record Z, processes its updates using the RZ record counters, and saves treated record in database while old versions are deleted form DB. Then, a client rereads the RZ record and increments counters of updates for the other clients. After that, a client rereads the Z record, saves necessary statistics, and deliberates the results of processing. In the case of emerging conflict because of simultaneous updates of the RZ record, the client obtains all versions of that

  8. Upgrading to a New Version of an ERP System

    DEFF Research Database (Denmark)

    Holst Riis, Philip; Schubert, Petra

    2012-01-01

    This paper presents research findings about the process of upgrading from an old to a new version of a pre-packaged enterprise system in a software ecosystem of independent software vendors (ISVs) and value added resellers (VARs). Empirical data was collected from documents, observations and inte......This paper presents research findings about the process of upgrading from an old to a new version of a pre-packaged enterprise system in a software ecosystem of independent software vendors (ISVs) and value added resellers (VARs). Empirical data was collected from documents, observations...... of the actors in the ecosystem may cause inertia in the diffusion of new versions....

  9. Technical note: The Lagrangian particle dispersion model FLEXPART version 6.2

    Directory of Open Access Journals (Sweden)

    A. Stohl

    2005-01-01

    Full Text Available The Lagrangian particle dispersion model FLEXPART was originally (about 8 years ago designed for calculating the long-range and mesoscale dispersion of air pollutants from point sources, such as after an accident in a nuclear power plant. In the meantime FLEXPART has evolved into a comprehensive tool for atmospheric transport modeling and analysis. Its application fields were extended from air pollution studies to other topics where atmospheric transport plays a role (e.g., exchange between the stratosphere and troposphere, or the global water cycle. It has evolved into a true community model that is now being used by at least 25 groups from 14 different countries and is seeing both operational and research applications. A user manual has been kept actual over the years and was distributed over an internet page along with the model's source code. In this note we provide a citeable technical description of FLEXPART's latest version (6.2.

  10. The Factor Structure and Validity of the Persian Version of the Baumrind Parenting Style Inventory

    Directory of Open Access Journals (Sweden)

    اصغر مینائی

    2017-06-01

    Full Text Available In this study, the factor structure and validity of the Persian version of the Baumrind parenting style inventory were evaluated among 576 mothers of elementary school students in Tehran who had been selected through multistage cluster sampling method. This study is, due to its subject and purposes a descriptive study based on psychometric methods. The factor structure of the inventory was tested by AMOS software based on the fitting and modification indicators in the confirmatory factor analysis. The results showed that all items of the parenting style inventory except the items of 24, 8, 13, 18, assess the previously determined factors of the inventory, and that the inventory’s questions have a relatively good validity. Also, stratified alpha was used to calculate the reliability of the whole inventory, and Guttman coefficient was utilized to calculate the reliability of subscales. The outcomes indicated that the inventory and its subscales possess a relatively good reliability.

  11. Data analysis using SPSS for Windows, versions 8 - 10 a beginner's guide

    CERN Document Server

    Foster, Jeremy J, Dr

    2001-01-01

    A new edition of this best-selling introductory book to cover the latest SPSS versions 8.0 - 10.0 This book is designed to teach beginners how to use SPSS for Windows, the most widely used computer package for analysing quantitative data. Written in a clear, readable and non-technical style the author explains the basics of SPSS including the input of data, data manipulation, descriptive analyses and inferential techniques, including; - creating using and merging data files - creating and printing graphs and charts - parametric tests including t-tests, ANOVA, GLM - correlation, regression and factor analysis - non parametric tests and chi square reliability - obtaining neat print outs and tables - includes a CD-Rom containing example data files, syntax files, output files and Excel spreadsheets.

  12. Standard Electronic Format Specification for Tank Characterization Data Loader Version 3.0

    Energy Technology Data Exchange (ETDEWEB)

    ADAMS, M.R.

    1999-08-12

    The purpose of this document is to describe the standard electronic format for data files that will be sent for entry into the Tank Characterization Database (TCD). There are 2 different file types needed for each data load: Analytical Results; and Sample Descriptions. The first record of each file must be a header record. The content of the first 5 fields is ignored. They were used previously to satisfy historic requirements that are no longer applicable. The sixth field of the header record must contain the Standard Electronic Format (SEF) version ID (SEF3.0). The remaining records will be formatted as specified below. Fields within a record will be separated using the ''|'' symbol. The ''|''symbol must not appear anywhere in the file except when used as a delimiter.

  13. Multi keno-VAX a modified version of the reactor computer code Multi keno-2

    International Nuclear Information System (INIS)

    Imam, M.

    1995-01-01

    The reactor computer code Multi keno-2 is developed in Japan from the original Monte Carlo Keno-IV. By applications of this code on some real problems, fatal errors were detected. These errors are related to the restart option in the code. The restart option is essential for solving time-consuming problems on mini-computer like VAX-6320. These errors were corrected and other modifications were carried out in the code. Because of these modifications new input data description was written for the code. Thus a new VAX/VMS version for the program was developed which is also adaptable for mini-mainframes. This new developed program, called Multi keno-VAX is accepted in the Nea-IAEA data bank and is added to its international computer codes library. 1 fig

  14. SMOG programme version for np (E=1-5 GeV) experiment

    International Nuclear Information System (INIS)

    Kotorobaj, F.

    1975-01-01

    The SMOG program, which can be used for NPD robot scanning in the described experiment, is described. A new modifiaction, set up so as to ensure its reliable use on the CDC-1604A, is considered. The program was designed for and used in processing the np (E=1-5 GeV) experiment. SMOG uses three magnetic tapes at the input (one at the extension) and one at the output containing the assembled collected events. A new SMOG variant with origination of errors according to parity during the recording time is attempted in order to continue to write the given zone five times. A short description of the work with the new SMOG program version is given

  15. Stair negotiation in women with fibromyalgia: A descriptive correlational study.

    Science.gov (United States)

    Collado-Mateo, Daniel; Domínguez-Muñoz, Francisco J; Olivares, Pedro R; Adsuar, José C; Gusi, Narcis

    2017-10-01

    Walking up and down stairs is a common and important activity of daily living. Women with fibromyalgia often show a reduced ability to perform this task.The objective of this study was to evaluate the test-retest reliability of stair negotiation tasks and to assess the impact of fibromyalgia symptoms on the ability to negotiate stairs.Forty-two women with fibromyalgia participated in this descriptive correlational study. The relevance of the stair negotiation (both walking up and down) was evaluated by assessing its association with the revised version of the fibromyalgia impact questionnaire (FIQ-R) and other health-related variables. Test-retest reliability was also analyzed. The main outcome measures were time spent walking up and down stairs and impact of fibromyalgia, quality of life, number of falls, weight, and lower limb strength and endurance.The intraclass correlation coefficient (ICC) for stair descent was 0.929 whereas that for ascent was 0.972. The score in these tests correlated significantly with the total score for the FIQ-R and the score for many of dimensions and symptoms: that is, physical function, overall impact of fibromyalgia, pain, energy, stiffness, restorative sleep, tenderness, self-perceived balance problems, and sensitivity.Given the importance of the stair negotiation as activity of daily living and the high reliability, both stair ascent and descent tasks may be useful as outcome measures in studies on patients with fibromyalgia.

  16. The propagation effect of paper version and the iPad version for periodicals

    Directory of Open Access Journals (Sweden)

    Cong Zhang

    2015-04-01

    Full Text Available Purpose: Digital journal created a new development pattern. We use journal APP as an example to analyze how to migrate the journal content to Internet and other kind of media. Based on the case study of GQ and other fashion magazines, through text analysis, control experiments, in-depth interviews and other research methods, the authors analyzed the differences and connections between the iPad App and print edition of magazines, discussed the approaches towards operation of new media, offered the tendency of mobile device platform development for China’s periodical publications. Design/methodology/approach: control experiment. Findings: The authors give a stance that the print edition of periodical publication will being alive still, and conclude that journal APP and printed version can be mutually beneficial and achieve a win-win state. And we believe that the journal APP is good at advertising propagation, which will accelerate the development of journal APP in such the information age, and such kind of media can integrate many information with variety of media forms. Research limitations/implications: Because of the limitation of technology, the authors only have the experiment on fashion magazine, which might to some degree simplify the issue under discussion. Practical implications: According to the conclusion of a series of experiments, we can imply the future of the media, and give the suggestion of both paper version and ipad version of the journal. Social implications: Since people can not live without media and media has to develope with the help of public, we have to give the new way of both sunrise media and sunset media. Originality/value: Based on the case study of GQ and other fashion magazines, through text analysis, control experiments, in-depth interviews and other research methods, the authors analyzed the differences and connections between the iPad App and print edition of magazines, discussed the approaches towards

  17. M3 User's Manual. Version 3.0

    International Nuclear Information System (INIS)

    Laaksoharju, Marcus; Skaarman, Erik; Gomez, Javier B.

    2009-11-01

    This report describes the Multivariate Mixing and Mass balance calculations (M3). This new method and computer code is developed to trace the mixing and reaction processes in the groundwater. The aim of the M3 concept is to decode the often hidden and complex information gathered in the groundwater analytical data. The manual presents shortly the theory and practice behind the M3 method. The M3 computer code is also presented and emphasis is put on the reference manual. This includes detailed reference to the M3 program's abilities and limitations, installation procedures and all functions and operations that the program can perform. It also describes sample cases of how the program is used to analyse a test data set. This guide is part of the Help Files distributed together with M3. Two accompanying reports cover other aspects: - Concepts, Methods, and Mathematical Formulation, gives a complete description of the mathematical framework of M3 and introduces concepts and methods useful for the end user. - M3 version 3.0: Verification and Validation, gathers a collection of validation and verification exercises, designed to test each part of M3 code and to build confidence in its methodology. The M3 method has been tested and modified over several years. The development work has been supported by the Swedish Nuclear Fuel and Waste Management Company (SKB). The main test site for the model was the underground Aespoe Hard Rock Laboratory (HRL). The examples used in this manual are from a Aespoe international groundwater modelling co-operation project where one of the tools used was M3. The M3 concept has been applied on the data from SKB's site investigation programme and in data from Canada, Japan, Jordan, Gabon and Finland. The groundwater composition is a result of mixing processes and water-rock interaction. Standard groundwater models based on thermodynamic laws may not be applicable in a normal temperature groundwater system where equilibrium with many of the

  18. [Chinese version of a face version of the modified child dental anxiety scale: transcultural adaptation and evaluation].

    Science.gov (United States)

    Zhang, Hong-mei; Xia, Bin; Wang, Jian-hong; Xie, Pan; Huang, Qian; Ge, Li-hong

    2013-07-01

    To develop the Chinese version of a face version of the modified child dental anxiety scale (MCDASf) and test the reliability and validity of MCDASf. The English version of MCDASf was translated and back-translated, as well as crosscultural adapted by the method of psychometrics to develop the Chinese version of MCDASf. Subsequently the Chinese version schedule was randomly investigated among 245 kindergarten children and school children aged greater than 4 and less than 12 years on two separate occasions 3 weeks apart to determine the reliability. A total of 248 children attending Pediatrics Dentistry of Peking University School and Hospital of Stomatology aged greater than 4 and less than 12 years old were selected and completed the Chinese version of MCDASf and the Chinese version of modified Children's fear survey schedule-dental subscale (CFSS-DS) before treatment to determine the validity. Then we rated the children's behavior during dental treatment by Venham's clinical anxiety rating scale and cooperative behavior rating scale to evaluate the relation between self-assessed dental anxiety scores and the behavioral reaction during the dental treatment. In reliability study, 98.0% of 250 children completed the MCDASf. In validity study, 99.2% of 248 children completed the MCDASf. Cronbach's alpha coefficient of the translated scale was 0.814 and the test-retest reliability was 0.907. Principal component analysis of the translated scale confirmed that the scale consisted of a single unidimensional construct. The Chinese version of MCDASf significantly was correlated with the Chinese version of modified CFSS-DS (r = 0.843, P anxiety rating scale and cooperative behavior rating scale (r = 0.675, P dental anxiety in Chinese children aged 4-11 years.

  19. Procedure guideline for radioiodine test (version 3); Verfahrensanweisung zum Radioiodtest (Version 3)

    Energy Technology Data Exchange (ETDEWEB)

    Dietlein, M.; Schicha, H. [Deutsche Gesellschaft fuer Nuklearmedizin (DGN) (Germany); Koeln Univ. (Germany). Klinik und Poliklinik fuer Nuklearmedizin; Dressler, J. [Deutsche Gesellschaft fuer Nuklearmedizin (DGN) (Germany); Nuklearmedizinische Klinik der Henriettenstiftung, Hannover (Germany); Eschner, W. [Deutsche Gesellschaft fuer Nuklearmedizin (DGN) (Germany); Deutsche Gesellschaft fuer Medizinische Physik (DGMP) (Germany); Koeln Univ. (Germany). Klinik und Poliklinik fuer Nuklearmedizin; Lassmann, M. [Deutsche Gesellschaft fuer Nuklearmedizin (DGN) (Germany); Deutsche Gesellschaft fuer Medizinische Physik (DGMP) (Germany); Wuerzburg Univ. (Germany). Klinik und Poliklinik fuer Nuklearmedizin; Leisner, B. [Deutsche Gesellschaft fuer Nuklearmedizin (DGN) (Germany); Allgemeines Krankenhaus St. Georg, Hamburg (Germany). Abt. fuer Nuklearmedizin; Reiners, C. [Deutsche Gesellschaft fuer Nuklearmedizin (DGN) (Germany); Wuerzburg Univ. (Germany). Klinik und Poliklinik fuer Nuklearmedizin

    2007-07-01

    The version 3 of the procedure guideline for radioiodine test is an update of the guideline previously published in 2003. The procedure guideline discusses the pros and cons of a single measurement or of repeated measurements of the iodine-131 uptake and their optimal timing. Different formulas are described when one, two or three values of the radioiodine kinetic are available. The probe with a sodium-iodine crystal, alternatively or additionally the gamma camera using the ROI-technique are instrumentations for the measurement of iodine-131 uptake. A possible source of error is an inappropriate measurement (sonography) of the target volume. The patients' preparation includes the withdrawal of antithyroid drugs 2-3 days before radioiodine administration. The patient has to avoid iodine-containing medication and the possibility of additives of iodine in vitamin- and electrolyte-supplementation has to be considered. (orig.)

  20. Standardization and normative data of the Greek version of the temperament and character inventory (TCI).

    Science.gov (United States)

    Fountoulakis, Konstantinos N; Rozsa, Sandor; Siamouli, Melina; Moutou, Katerina; Pantoula, Eleonora; Cloninger, Claude Robert

    2015-01-01

    Robert Cloninger's psychobiological model of temperament and character is a dimensional approach to personality assessment and gave birth to the temperament and character inventory (TCI). The aim of the present report is to examine the psychometric properties of the Greek version of the TCI, and to replicate its postulated structure and provide preliminary normative data for the Greek population. The study sample included 734 subjects from the general Greek population (436 females; 59.4 % and 298 males; 40.6 %). Their mean age was 40.80 ± 11.48 years (range 25-67 years). The mean age for females was 39.43 ± 10.87 years (range 25-65 years), while the mean age for males was 42.82 ± 12.06 years (range 25-67 years). Descriptive statistics tables concerning age, gender and occupational status distribution in the sample were created. The analysis included the calculation of Cronbach's alpha, factor analysis with promax rotation and the calculation of Pearson correlation coefficients between the subscales scores. Analysis of Covariance with age as covariate and t test and Cohen's d as post hoc tests was used to search for differences in subscales scores between males and females. The overall psychometric properties of the Greek version of the TCI proved to be satisfactory, with acceptable consistencies of the subscales. The factor analysis of temperament identified four factors which together explained 58.56 % of total variance, while the factor analysis of the three-factor solution of the character explained 52.24 % of total variance. The TCI scales correlate significantly but weakly between each other and with age. The Greek version of the TCI exhibits psychometric properties similar to its original English counterpart and to other national translations and it is suitable for use in research and clinical practice.

  1. Psychometric comparisons of the Pictorial Child Behavior Checklist with the standard version of the instrument.

    Science.gov (United States)

    Leiner, Marie; Rescorla, Leslie; Medina, Irma; Blanc, Oscar; Ortiz, Melchor

    2010-09-01

    The low level of literacy and lack of language proficiency possessed by some immigrants from low socioeconomic status backgrounds create communication barriers in the healthcare setting, thus interfering with their ability to access appropriate medical care and their subsequent participation in medical research. Adding pictorial descriptions to questionnaires appears to improve patient response when literacy levels are low. Psychometric results from 4 studies using a pictorial version of the Child Behavior Checklist (Pictorial Child Behavior Checklist, or PCBCL) to assess behavioral and emotional problems in children from low-income Hispanic families attending hospital-based pediatric practices are reported here. The 2 form versions (the original Child Behavior Checklist, or CBCL, vs. the PCBCL), which were randomly assigned, manifested comparable test-retest reliability (Study 1), alternate-form reliability (Study 2), and mean problem scores (Study 3). The PCBCL was also comparable to the CBCL in discriminating between community children attending regular pediatric clinics and children attending an outpatient psychiatric clinic (Study 4). Thus, the PCBCL yielded results that were comparable to those obtained with the CBCL, indicating that it may be a viable alternative for parents confronting communication barriers due to low literacy levels.

  2. Psychometric properties of the Arabic version of the 12-item diabetes fatalism scale.

    Science.gov (United States)

    Sukkarieh-Haraty, Ola; Egede, Leonard E; Abi Kharma, Joelle; Bassil, Maya

    2018-01-01

    There are widespread fatalistic beliefs in Arab countries, especially among individuals with diabetes. However, there is no tool to assess diabetes fatalism in this population. This study describes the processes used to create an Arabic version of the Diabetes Fatalism Scale (DFS) and examine its psychometric properties. A descriptive correlational design was used with a convenience sample of Lebanese adults (N = 274) with type 2 diabetes recruited from a major hospital in Beirut, Lebanon and by snowball sampling. The 12- item Diabetes Fatalism Scale- Arabic (12-item DFS-Ar) was back-translated from the original version, pilot tested on 22 adults with type 2 diabetes and then administered to 274 patients to assess the validity and reliability of the scale. Confirmatory factor analysis (CFA) was used to test the hypothesized factor structure. Cronbach's alpha was used to test for reliability. CFA supported the existence of the three factor hypothesis of the original DFS scale. The five items measuring "emotional distress" loaded under Factor 1, the four items measuring "spiritual coping" loaded under factor 2 and the last three items measuring "perceived self-efficacy" of the original scale loaded under Factor 3 (p fatalism. Further testing with larger and non-Lebanese Arabic population is needed.

  3. [A reliability analysis of FACES III (the version in Spanish). Family Adaptability and Cohesion Evaluation Scales].

    Science.gov (United States)

    Ponce Rosas, E R; Gómez Clavelina, F J; Irigoyen Coria, A E; Terán Trillo, M; Landgrave Ibáñez, S; Hernández Gómez, A; Montesinos Guerrero, M R; Hernández Soto, M C

    1999-05-15

    To determine through five methods (Cronbach's alpha, split, Guttman method, parallel and strict parallel) the confidence coefficient of FACES III, instrument validated on spanish version, and to evaluate it's consistency with these five statistical methods. Descriptive, cross-sectional. Tlalpan Area, south of Federal District, México, divided into geo-statistical zones. A randomised sample of 270 dwellings with proportional coverage, based on 17,895 ordinary dwellings of the area. Domicile survey using FACES III (Family Adaptability and Cohesion Evaluation Scales); April-May 1995. The confidence coefficient of FACES III spanish version was calculated using no standardised Cronbach's Alpha = 0.69; split I = 0.73 and split II = 0.66; Guttman method = 0.75; parallel = 0.69 and strict parallel = 0.53. Cronbach's coefficient demonstrated more advantages than the other statistical methods in relation with the ordinal measurement scale of FACES III. We suggest to take into consideration three important aspects for the correct confidence analysis of this kind of instruments: Variance analysis depending on the scale of items (F test, Friedman or Cochran) Inter-items interactions analysis (nonadditivity) and the use of the balance value as purge element of error' source. Analysis of Tukey estimate, coefficient of concordance (W) and Hotelling's T squared. It's necessary the evaluation and analysis of this aspects before the report of confidence's coefficient values whose can have hidden skew.

  4. ITS Version 6 : the integrated TIGER series of coupled electron/photon Monte Carlo transport codes.

    Energy Technology Data Exchange (ETDEWEB)

    Franke, Brian Claude; Kensek, Ronald Patrick; Laub, Thomas William

    2008-04-01

    ITS is a powerful and user-friendly software package permitting state-of-the-art Monte Carlo solution of lineartime-independent coupled electron/photon radiation transport problems, with or without the presence of macroscopic electric and magnetic fields of arbitrary spatial dependence. Our goal has been to simultaneously maximize operational simplicity and physical accuracy. Through a set of preprocessor directives, the user selects one of the many ITS codes. The ease with which the makefile system is applied combines with an input scheme based on order-independent descriptive keywords that makes maximum use of defaults and internal error checking to provide experimentalists and theorists alike with a method for the routine but rigorous solution of sophisticated radiation transport problems. Physical rigor is provided by employing accurate cross sections, sampling distributions, and physical models for describing the production and transport of the electron/photon cascade from 1.0 GeV down to 1.0 keV. The availability of source code permits the more sophisticated user to tailor the codes to specific applications and to extend the capabilities of the codes to more complex applications. Version 6, the latest version of ITS, contains (1) improvements to the ITS 5.0 codes, and (2) conversion to Fortran 90. The general user friendliness of the software has been enhanced through memory allocation to reduce the need for users to modify and recompile the code.

  5. Reliability and validity of Persian version of perceived stress scale (PSS-10) in adults with asthma.

    Science.gov (United States)

    Maroufizadeh, Saman; Zareiyan, Armin; Sigari, Naseh

    2014-05-01

    Asthma is a major public health problem in the world, and recent findings suggest that stress influences asthma and asthma morbidity. The 10-item Perceived Stress Scale (PSS-10) is one of the most frequently used instruments to measure psychological stress. This study was conducted to evaluate the psychometric properties of the Persian versions of the PSS-10 in adults with asthma. In this descriptive cross-sectional study as a methodological research, 106 asthmatic patients referring to several clinics in Sanandaj (western Iran) were selected through convenience sampling. The PSS-10 and the 21-item Depression anxiety and stress scale (DASS-21) were administrated to all patients. Cronbach's alpha was used to evaluate reliability of PSS-10, and confirmatory factor analysis (CFA) and convergent validity were used to evaluate its validity. The results of confirmatory factor analysis indicated that a two-factor structure of PSS-10 provided a good fit to data. The Cronbach's alpha coefficients for negative factor, positive factor and total score (PSS-10) were 0.86, 0.83, and 0.90, respectively. The PSS-10 was positively correlated with the DASS-21 and its subscales, indicating an acceptable convergent validity. Female asthmatic patients scored higher on PSS-10 in comparison with male asthmatic patients. The Persian version of PSS-10 is a valid and reliable instrument to measure perceived stress in adults with asthma.

  6. Performance of PI-RADS version 1 versus version 2 regarding the relation with histopathological results.

    Science.gov (United States)

    Auer, Thomas; Edlinger, Michael; Bektic, Jasmin; Nagele, Udo; Herrmann, Thomas; Schäfer, Georg; Aigner, Friedrich; Junker, Daniel

    2017-05-01

    Aim of this study was to compare the diagnostic performance of PI-RADS version 1 (v1) and version 2 (v2) in the detection of prostate cancer (PCa). Multiparametric MRIs (mpMRI) of 50 consecutive patients with biopsy proven PCa, which had originally been evaluated according to PIRADS v1, were now retrospectively re-evaluated, comparing PI-RADS v1 and v2. MpMRI data were evaluated in comparison with histopathological whole-mount step-section slides. MRI examinations included T2-weighted, diffusion-weighted, and dynamic contrast-enhanced MRI. Overall PI-RADS v1 showed a significantly larger discriminative ability of tumor detection: PI-RADS v1 AUC 0.96 (95 % CI 0.94-0.98) and v2 AUC 0.90 (95 % CI 0.86-0.94). For peripheral zone lesions, PI-RADS v1 showed a significantly larger ability of PCa discrimination: v1 AUC 0.97 (95 % CI 0.95-0.99) and v2 AUC 0.92 (95 % CI 0.88-0.96). For transition zone lesions, PI-RADS v1 showed more discrimination: v1 AUC 0.96 (95 % CI 0.92-1.00) and v2 0.90 (95 % CI 0.83-0.97), but the difference was not significant. PI-RADS v2 resulted in significantly more false negative results (3 % in v1, 14 % in v2) and a comparable number of true positive results (82 % in v1, 80 % in v2). PI-RADS v2 uses a simplified approach, but shows a lower diagnostic accuracy. This could lead to a higher rate of false negative results with the risk of missing tumors within low PI-RADS score levels. Therefore, its use cannot be recommended unconditionally, and further improvement should be considered.

  7. Database versioning and its implementation in geoscience information systems

    Science.gov (United States)

    Le, Hai Ha; Schaeben, Helmut; Jasper, Heinrich; Görz, Ines

    2014-09-01

    Many different versions of geoscience data concurrently exist in a database for different geological paradigms, source data, and authors. The aim of this study is to manage these versions in a database management system. Our data include geological surfaces, which are triangulated meshes in this study. Unlike revision/version/source control systems, our data are stored in a central database without local copies. The main contributions of this study include (1) a data model with input/output/manage functions, (2) a mesh comparison function, (3) a version merging strategy, and (4) the implementation of all of the concepts in PostgreSQL and gOcad. The software has been tested using synthetic surfaces and a simple tectonic model of a deformed stratigraphic horizon.

  8. ARROW (Version 2) Commercial Software Validation and Configuration Control

    International Nuclear Information System (INIS)

    HEARD, F.J.

    2000-01-01

    ARROW (Version 2), a compressible flow piping network modeling and analysis computer program from Applied Flow Technology, was installed for use at the U.S. Department of Energy Hanford Site near Richland, Washington

  9. Geostationary Surface and Insolation Products (GSIP), Version 3

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Geostationary Surface and Insolation Products (GSIP) Version 3 contains upwelling and downwelling shortwave (0.2-4.0 um) and visible (0.4-0.7 um) radiative...

  10. Gridded Population of the World, Version 3 (GPWv3): Centroids

    Data.gov (United States)

    National Aeronautics and Space Administration — Gridded Population of the World, Version 3 (GPWv3) Centroids consists of estimates of human population counts and densities for the years 1990, 1995, 2000, 2005,...

  11. ARROW (Version 2) Commercial Software Validation and Configuration Control

    Energy Technology Data Exchange (ETDEWEB)

    HEARD, F.J.

    2000-02-10

    ARROW (Version 2), a compressible flow piping network modeling and analysis computer program from Applied Flow Technology, was installed for use at the U.S. Department of Energy Hanford Site near Richland, Washington.

  12. Global Fertilizer and Manure, Version 1: Phosphorus in Manure Production

    Data.gov (United States)

    National Aeronautics and Space Administration — The Phosphorus in Manure Production dataset of the Global Fertilizer and Manure, Version 1 Data Collection represents the amount of phosphorus manure produced and...

  13. ENERGY STAR Certified Light Bulbs Version 2.0

    Data.gov (United States)

    U.S. Environmental Protection Agency — Certified models meet all ENERGY STAR requirements as listed in the Version 2.0 and V2.1 ENERGY STAR Program Requirements for Lamps (Light Bulbs) that are effective...

  14. U.S. Climate Divisional Dataset (Version Superseded)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data has been superseded by a newer version of the dataset. Please refer to NOAA's Climate Divisional Database for more information. The U.S. Climate Divisional...

  15. Permafrost Map for Northwestern Canada (Mackenzie Region), Version 1

    Data.gov (United States)

    National Aeronautics and Space Administration — The Permafrost Map for Northwestern Canada (Mackenzie Region) is a digital version of the 1:1,000,000 map produced by Heginbottom and Radburn [Heginbottom, J.A. and...

  16. Global Rural-Urban Mapping Project (GRUMP), Alpha Version

    Data.gov (United States)

    National Aeronautics and Space Administration — The Global Rural-Urban Mapping Project (GRUMP), Alpha Version consists of estimates of human population for the years 1990, 1995, and 2000 by 30 arc-second (1km)...

  17. Gridded Species Distribution, Version 1: Global Amphibians Original Grids

    Data.gov (United States)

    National Aeronautics and Space Administration — The Global Amphibians Original Grids of the Gridded Species Distribution, Version 1 are converted 1- kilometer grid cell data available in the Geographic Coordinate...

  18. Version control of pathway models using XML patches.

    Science.gov (United States)

    Saffrey, Peter; Orton, Richard

    2009-03-17

    Computational modelling has become an important tool in understanding biological systems such as signalling pathways. With an increase in size complexity of models comes a need for techniques to manage model versions and their relationship to one another. Model version control for pathway models shares some of the features of software version control but has a number of differences that warrant a specific solution. We present a model version control method, along with a prototype implementation, based on XML patches. We show its application to the EGF/RAS/RAF pathway. Our method allows quick and convenient storage of a wide range of model variations and enables a thorough explanation of these variations. Trying to produce these results without such methods results in slow and cumbersome development that is prone to frustration and human error.

  19. Gridded Species Distribution, Version 1: Global Amphibians Family Richness Grids

    Data.gov (United States)

    National Aeronautics and Space Administration — Global Amphibians Family Richness Grids of the Gridded Species Distribution, Version 1 are aggregations of the presence grids data at the family level. They are...

  20. Gridded Population of the World, Version 2 (GPWv2)

    Data.gov (United States)

    National Aeronautics and Space Administration — Gridded Population of the World, Version 2 (GPWv2) consists of estimates of human population for the years 1995 and 1990 by 2.5 arc-minute grid cells. The data...