WorldWideScience

Sample records for title blank leave

  1. Modified blank ammunition injuries.

    Science.gov (United States)

    Ogunc, Gokhan I; Ozer, M Tahir; Coskun, Kagan; Uzar, Ali Ihsan

    2009-12-15

    Blank firing weapons are designed only for discharging blank ammunition cartridges. Because they are cost-effective, are easily accessible and can be modified to live firearms plus their unclear legal situation in Turkish Law makes them very popular in Turkey. 2004 through 2008, a total of 1115 modified blank weapons were seized in Turkey. Blank firing weapons are easily modified by owners, making them suitable for discharging live firearm ammunition or modified blank ammunitions. Two common methods are used for modification of blank weapons. After the modification, these weapons can discharge the live ammunition. However, due to compositional durability problems with these types of weapons; the main trend is to use the modified blank ammunitions rather than live firearm ammunition fired from modified blank firing weapons. In this study, two types of modified blank weapons and two types of modified blank cartridges were tested on three different target models. Each of the models' shooting side was coated with 1.3+/-2 mm thickness chrome tanned cowhide as a skin simulant. The first model was only coated with skin simulant. The second model was coated with skin simulant and 100% cotton police shirt. The third model was coated with skin simulant and jean denim. After the literature evaluation four high risky anatomic locations (the neck area; the eyes; the thorax area and inguinal area) were pointed out for the steel and lead projectiles are discharged from the modified blank weapons especially in close range (0-50 cm). The target models were designed for these anatomic locations. For the target models six Transparent Ballistic Candle blocks (TCB) were prepared and divided into two test groups. The first group tests were performed with lead projectiles and second group with steel projectile. The shortest penetration depth (lead projectile: 4.358 cm; steel projectile 8.032 cm) was recorded in the skin simulant and jean denim coated block for both groups. In both groups

  2. On the construction of a 2-metre mirror blank for the universal reflecting telescope in Tautenburg (German Title: Über die Fertigung eines 2-Meter-Spiegelträgers für das Universal-Spiegelteleskop in Tautenburg )

    Science.gov (United States)

    Lödel, Wolfgang

    The astronomers' desire to penetrate deeper into space transforms into a demand for larger telescopes. The primary mirror constitutes the main part of a reflecting telescope, and it determines all subsequent activities. Already in the 1930s activities existed in the Schott company to manufacture mirror blanks up to diameters of 2 metres, which could not be pursued because of political constraints. This ambitious goal was again picked up a few years after the war. At a time when the procurement of raw materials was extremely difficult, the glass workers of Schott in Jena attacked this large project. After some failures, a good mirror blank could be delivered to the Carl Zeiss Company in 1951 for further processing and for the construction of the first 2-metre reflecting telescope. From 1960 to 1986, this mirror made from optical glass ZK7 served its purpose at the Karl Schwarzschild Observatory in Tautenburg. lt was then replaced by a zero expansion glass ceramics mirror.

  3. National collegiate athletic association division and primary job title of athletic trainers and their job satisfaction or intention to leave athletic training.

    Science.gov (United States)

    Terranova, Aaron B; Henning, Jolene M

    2011-01-01

    Membership in the National Athletic Trainers' Association (NATA) has declined in recent years, generating much debate about professional commitment. To compare the contributing factors of job satisfaction and intention to leave athletic training of certified athletic trainers (ATs) employed in National Collegiate Athletic Association (NCAA) institutions. Cross-sectional study. A link to a Web-based questionnaire containing the Spector Job Satisfaction Survey (JSS) and an original Intention to Leave Survey (ITLS) was distributed by e-mail to 1003 certified members of the National Athletic Trainers' Association. A total of 191 certified members of the NATA employed in a college or university setting in a primarily clinical capacity; representing all NCAA divisions; and having the job title of head athletic trainer, associate/assistant athletic trainer, or graduate assistant/intern athletic trainer. We used separate 3 x 3 factorial analyses of variance to compare the mean scores of each JSS subscale and of the ITLS with NCAA division and job title. A stepwise multiple regression was used to determine the strength of the relationships between the JSS subscales and the ITLS. We found differences for job title in the subscales of Fringe Benefits (F(2182) = 7.82, P = .001 ) and Operating Conditions (F(2,182) = 12.01, P < .001). The JSS subscale Nature of Work was the'greatest indicator of intention to leave (β = -0.45). We found a strong negative correlation between various facets of job satisfaction and intention to leave athletic training. The NCAA division seemed to have no effect on an individual's job satisfaction or intention to leave the profession. In addition, only Fringe Benefits and Operating Conditions seemed to be affected by job title. The ATs had similar levels of job satisfaction regardless of NCAA division, and their job titles were not a major factor in job satisfaction.

  4. Tailor-welded blanks and their production

    Science.gov (United States)

    Yan, Qi

    2005-01-01

    Tailor welded blanks had been widely used in the automobile industry. A tailor welded blank consists of several flat sheets that were laser welded together before stamping. A combination of different materials, thickness, and coatings could be welded together to form a blank for stamping car body panels. As for the material for automobile industry, this technology was one of the development trend for automobile industry because of its weight reduction, safety improvement and economical use of materials. In this paper, the characters and production of tailor welded blanks in the market were discussed in detail. There had two major methods to produce tailor welded blanks. Laser welding would replace mesh seam welding for the production of tailor welded blanks in the future. The requirements on the edge preparation of unwelded blanks for tailor welded blanks were higher than the other steel processing technology. In order to produce the laser welded blank, there had the other process before the laser welding in the factory. In the world, there had three kinds of patterns for the large volume production of tailor welded blanks. In China, steel factory played the important role in the promotion of the application of tailor welded blanks. The competition for the supply of tailor welded blanks to the automobile industry would become fierce in the near future. As a result, the demand for the quality control on the production of tailor welded blanks would be the first priority concern for the factory.

  5. Deep drawing simulation of Tailored Blanks

    NARCIS (Netherlands)

    van den Berg, Albert; Meinders, Vincent T.; Stokman, B.

    1998-01-01

    Tailored blanks are increasingly used in the automotive industry. A tailored blank consists of different metal parts, which are joined by a welding process. These metal parts usually have different material properties. Hence, the main advantage of using a tailored blank is to provide the right

  6. Steroid radioimmunoassays. The problems of blanks

    Energy Technology Data Exchange (ETDEWEB)

    Shinde, Y; Hacker, R R; Ntunde, B; Smith, V G [Guelph Univ., Ontario (Canada). Dept. of Animal and Poultry Science

    1981-06-01

    An estrogen radioimmunoassay was used to study the problem of blanks in steroid assays. Negligible binding (1.5 percent) in the non-antibody tubes prevailed throughout the study. The assay was validated using accepted procedures. Both water and solvent blanks had estrogen concentrations of 7-9 pg/tube. However, neither water nor solvent blanks showed a dose-related response, indicating that they were 'real' blanks. Exogenous estradiol, when added to water and solvent in quantities less than the estimated blank, was not quantitatively recovered. However, exogenous estradiol added to the water solvent in quantities greater than the blank estimate was quantitatively recovered. The sensitivity of the reference standard curve was 6-10 pg/tube, approximately the same as the blank estimate. These results indicated that the estimates of water and solvent blanks were measures of the assay sensitivity. In such circumstances, it is suggested that blank estimates should not be subtracted from sample values. If the blank estimates are high, attention should be directed towards improving the sensitivity of the assay.

  7. Isolation and characterization of α-cellulose from blank bunches of palm oil and dry jackfruit leaves with alkaline process NaOH continued with bleaching process H2O2

    Science.gov (United States)

    Tristantini, Dewi; Dewanti, Dian Purwitasari; Sandra, Cindy

    2017-11-01

    Alpha cellulose is a pure form of cellulose. Cellulose is a natural polymer in the form of carbohydrates (polysaccharides) that has fiber which is white, insoluble in water, renewable, easily decomposes, and non-toxic. Cellulosic sources are abundant in nature even in untapped biomass wastes. In this study, cellulose was isolated from Empty Palm Oil Bunches (EPOB) of 45% and Dry Jackfruit Leaves (DJL) of 21.45%. This study aims to obtain optimum yield of cellulose at NaOH concentration and cellulose characterization with water content, FTIR, and SEM analysis. The optimum α-cellulose yield was determined by alkali process with 8, 10, 12 and 14% (w/v) NaOH variations at 90-100 °C for 3 hours to remove hemicellulose and lignin followed by bleaching process with H2O2 10% (w/v) at 80-90 °C for 1.5 h to obtain pure α-cellulose. The optimum yield of EPOB cellulose was 38,562% in 12% NaOH and DJL was 7.27% in 10% NaOH. The water content in OPB cellulose was 4.38% and DJL was 6.37%. A typical cellulose-forming functional group seen in FTIR (Fourier Transform Infra-Red) and morphological results appears in SEM (Scanning Electron Microscopy) analysis. From FTIR analysis result shows cellulose from EPOB and DJL contains O-H, C-H, and C-O. SEM analysis shows fibers from EPOB and DJL are uniform and have pores. However, DJL fibers have white patches, which suspected to be impurities.

  8. Laser welding of tailored blanks

    International Nuclear Information System (INIS)

    Pecas, P.; Gouveia, H.; Quintino, L.; Olsen, F.O.

    1998-01-01

    Laser welding has an increasing role in the automotive industry, namely on the sub-assemblies manufacturing. Several sheet-shape parts are laser welded, on a dissimilar combination of thicknesses and materials, and are afterwards formed (stamped) being transformed in a vehicle body component. In this paper low carbon CO 2 laser welding, on the thicknesses of 1,25 and 0.75 mm, formability investigation is described. There will be a description of how the laser welded blanks behave in different forming tests, and the influence of misalignment and undercut on the formability. The quality is evaluated by measuring the limit strain and limit effective strain for the laser welded sheets and the base material, which will be presented in a forming limit diagram. (Author) 14 refs

  9. Formability of stainless steel tailored blanks

    DEFF Research Database (Denmark)

    Bagger, Claus; Gong, Hui; Olsen, Flemming Ove

    2004-01-01

    In a number of systematic tests, the formability of tailored blanks consisting of even and different combinations of AISI304 and AISI316 in thickness of 0.8 mm and 1.5 mm have been investigated. In order to analyse the formability of tailored blanks with different sheet thickness, a method based ...

  10. Laser welding of tailored blanks

    Directory of Open Access Journals (Sweden)

    Peças, P.

    1998-04-01

    Full Text Available Laser welding has an incrising role in the automotive industry, namely on the sub-assemblies manufacturing. Several sheet-shape parts are laser welded, on a dissimilar combination of thicknesses and materials, and are afterwards formed (stamped being transformed in a vehicle body component. In this paper low carbon CO2 laser welding, on the thicknesses of 1,25 and 0,75 mm, formability investigation is described. There will be a description of how the laser welded blanks behave in different forming tests, and the influence of misalignment and undercut on the formibility. The quality is evaluated by measuring the limit strain and limit effective strain for the laser welded sheets and the base material, which will be presented in a forming limit diagram.

    A soldadura laser assume um papel cada vez mais importante na indústria automóvel, principalmente para a fabricação de sub-conjuntos constituídos por varias partes de chapa de diferentes espessuras (e diferentes materiais, que depois de estampados constituem um componente para integrar num veículo. Descreve-se neste artigo o trabalho de investigação de enformabilidade de chapa de ac.o de baixo carbono soldada por laser de CO2, nas espessuras de 1,25 e 0,75 mm. Apresenta-se uma descrição do comportamento das chapas soldadas por laser em diferentes testes de enformação, e a influência dos defeitos das soldaduras (desalinhamento e queda do banho-undercut no comportamento à enformação. A qualidade é avaliada pela medição da extensão limite e da extensão limite efectiva no material base e no material soldado, que serão representadas num diagrama de limite de enformabilidade.

  11. Forming Tests for Laser Welded Blanks

    DEFF Research Database (Denmark)

    Bagger, Claus; Olsen, Flemming Ove; Rasmussen, Mads

    1998-01-01

    Ratio test (LDR)Tensile testBulge testMarziniak testPractical examples obtained for laser welded blanks are shown. In combination, tensile tests and the Bulge test can form the so-called Forming Limiting Curves and examples of curves obtained from laser welded blanks are shown.......In this paper different means for testing the formability of new material combinations used as tailored blanks in the automotive industry are presented. The following forming techniques will be described and their benefits and drawbacks presented :Limiting Dome Height test (LDH)Limiting Drawing...

  12. NDE of ceramic insulator blanks by radiography

    International Nuclear Information System (INIS)

    Sarvanan, S.; Venkatraman, B.; Jayakumar, T.; Baldev Raj

    1996-01-01

    The production of ceramic insulators in electrical industry involves a number of steps, one of which is the green blank. The defects such as voids and crack can be present in the extruded green blank. One of the best non-destructive evaluation (NDE) technique radiography. This paper deals with the development of methodology based on theoretical modeling for the examination of ceramics by high sensitivity radiography. (author)

  13. Automatic classification of blank substrate defects

    Science.gov (United States)

    Boettiger, Tom; Buck, Peter; Paninjath, Sankaranarayanan; Pereira, Mark; Ronald, Rob; Rost, Dan; Samir, Bhamidipati

    2014-10-01

    Mask preparation stages are crucial in mask manufacturing, since this mask is to later act as a template for considerable number of dies on wafer. Defects on the initial blank substrate, and subsequent cleaned and coated substrates, can have a profound impact on the usability of the finished mask. This emphasizes the need for early and accurate identification of blank substrate defects and the risk they pose to the patterned reticle. While Automatic Defect Classification (ADC) is a well-developed technology for inspection and analysis of defects on patterned wafers and masks in the semiconductors industry, ADC for mask blanks is still in the early stages of adoption and development. Calibre ADC is a powerful analysis tool for fast, accurate, consistent and automatic classification of defects on mask blanks. Accurate, automated classification of mask blanks leads to better usability of blanks by enabling defect avoidance technologies during mask writing. Detailed information on blank defects can help to select appropriate job-decks to be written on the mask by defect avoidance tools [1][4][5]. Smart algorithms separate critical defects from the potentially large number of non-critical defects or false defects detected at various stages during mask blank preparation. Mechanisms used by Calibre ADC to identify and characterize defects include defect location and size, signal polarity (dark, bright) in both transmitted and reflected review images, distinguishing defect signals from background noise in defect images. The Calibre ADC engine then uses a decision tree to translate this information into a defect classification code. Using this automated process improves classification accuracy, repeatability and speed, while avoiding the subjectivity of human judgment compared to the alternative of manual defect classification by trained personnel [2]. This paper focuses on the results from the evaluation of Automatic Defect Classification (ADC) product at MP Mask

  14. Mathematical model of the crystallizing blank`s thermal state at the horizontal continuous casting machine

    Directory of Open Access Journals (Sweden)

    Kryukov Igor Yu.

    2017-01-01

    Full Text Available Present article is devoted to the development of the mathematical model, which describes thermal state and crystallization process of the rectangular cross-section blank while continious process of extraction from a horysontal continious casting machine (HCCM.The developed model took cue for the heat-transfer properties of non-iron metal teeming; its temperature on entry to the casting mold; cooling conditions of blank in the carbon molds in the presence of a copper water cooler. Besides, has been considered the asymmetry of heat interchange from blank`s head and drag at mold, coming out from fluid contraction and features of the horizontal casting mold. The developed mathematical model allows to determine alterations in crystallizing blank of the following factors with respect to time: temperature pattern of crystallizing blank under different technical working regimes of HCCM; boundaries of solid two-phase field and liquid two-phase filed; blank`s thickness variation under shrinkage of the ingot`s material

  15. Lubricant test for punching and blanking

    DEFF Research Database (Denmark)

    Olsson, David Dam; Bay, Niels; Andreasen, Jan Lasson

    2003-01-01

    Punching/blanking is one of the tribologically wise most severe metal forming processes.Insu $cient lubrication leads to heavy pick-up of work piece material on the punch stem,bad tolerances and eventual breakdown of the punch due to excessive backstroke force,especially in case of tribologically...... of alternative lubricants the present paper describes a new lubricant test for punching....

  16. Design and economic justification of group blanks application

    Directory of Open Access Journals (Sweden)

    V. Todić

    2012-04-01

    Full Text Available Within the manufacturing process planning, blanks are either selected or designed, respectively forms of input material for the manufacture of products. Reviewed in this paper are three types of group blanks: group castings, group forgings manufactured by closed die forging and free forging, and group blanks manufactured by pressing melted metal in casts. The paper also presents requisites for design and evaluation of economic justification of group blanks application.

  17. System 6: A pricing strategy for long blanks

    Science.gov (United States)

    Hugh W. Reynolds; Bruce G. Hansen; Bruce G. Hansen

    1986-01-01

    In System 6, small-diameter, low-grade hardwood timber is used to make blanks in standard sizes. Blanks are made in one thickness and one quality class but in all the standard lengths during each production run. The quantity of blanks per length can be varied, while keeping total yield high, by using proper production control techniques. However, when the percentage of...

  18. Deep drawing simulations of tailored blanks and experimental verification

    NARCIS (Netherlands)

    Meinders, Vincent T.; van den Berg, Albert; Huetink, Han

    2000-01-01

    Tailored Blanks are increasingly used in the automotive industry. A combination of different materials, thickness, and coatings can be welded together to form a blank for stamping car body panels. The main advantage of using Tailored Blanks is to have specific characteristics at particular parts of

  19. Finite Element Simulation of Blanking Process

    Directory of Open Access Journals (Sweden)

    Afzal Ahmed

    2012-10-01

    Full Text Available ABSTRACT: The blanking process can be simulated by ABAQUS v 6.4 to select punch, die and press and ascertain punch wear and bur height. The experimental and the simulation results agree well with rising punch force up to the point of creation of crack. For a 2mm mild steel sheet, the simulation shows that for the punch force of 240 kN, the crack starts at 30% punch penetration depth and punch force suddenly drops to a value of 70 kN and remains steady till the blanking is complete. Comparing simulation and experimental results for a 3mm mild steel sheet, results agree well in the elastic range with the punch force rising up to point of crack creation. However, a discrepancy appears in punch force which increases with punch penetration. At 32% depth of penetration, the discrepancy is 12 % which increases to 60 % at punch penetration of 42%. Punch force for experimental and simulation results remains about 90kN beyond punch penetration of 62%. Also, increase of the thickness of sheet results in reduced crack height and improved quality of blank.ABSTRAK: Proses pengosongan boleh disimulasikan oleh ABAQUS versi 6.4 untuk memilih tebuk, alat dan tekan; dan menentukan haus tebuk dan ketinggian duri. Keputusan ujikaji dan simulasi adalah serupa dengan kenaikan daya tebuk hingga titik retakan diperolehi. Bagi kepingan keluli ringan 2mm simulasi menunjukkan bahawa untuk tenaga tebukan sebanyak 240 kN, retak bermula pada 30% kedalaman penembusan 30% tebukan dan daya tebuk tiba-tiba jatuh kepada 70 kN dan jumplah ini kekal sehingga proses pengosongan selesai.  Apabila hasil simulasi dan eksperimen dibandingkan, keputusan experimen untuk keluli lembut 3mm, bersetuju dengan baik dalam julat anjal dan daya tebukan meningkat sehingga titik penciptaan retak diperolehi. Walau bagaimanapun percanggahan muncul apabila daya tebukan meningkat dengan daya penembusan. Pada kedalaman penembusan 32% percanggahan adalah 12% dan nilai ini meningkat kepada 60% apabila

  20. Application of field blanks in odour emission research

    NARCIS (Netherlands)

    Ogink, Nico W.M.; Klarenbeek, Johannes V.

    2016-01-01

    In the Netherlands field blanks are mandatory when sampling odour emission. Field blanks are matrices that have negligible or unmeasurable amounts of the substance of interest. They are used to document possible contamination during sampling, transport and storage of samples. Although field

  1. Steroid radioimmunoassay: contribution of standards to blank values, ch. 4

    International Nuclear Information System (INIS)

    Froelich, M.; Termorshuizen, W.; Kenter, E.; Molenaar, A.J.

    1977-01-01

    The sensitivity of the radioimmunoassay of steroids is considerably reduced by high blank values which may be derived in part from co-chromatographed standards. Blank levels approach the detection limit of the radioimmunoassay of aldosterone, testosterone and androstenedione when 10,000 dpm (30-35 pg) labelled steroids are used as reference standard. When 20 μg aldosterone, testosterone, or androstenedione is used as standard, blank levels of up to 12,800 pg were measured in the radioimmunoassay. Application of the standards on a separate strip does not improve the results. From the experiments it appeared that contamination took place by transport by the solvent

  2. Application of hard coatings for blanking and piercing tools

    DEFF Research Database (Denmark)

    Podgornik, B.; Zajec, B.; Bay, Niels

    2011-01-01

    The aim of the present investigation was to examine the possibility of reducing lubrication and replacing expensive tungsten carbide material in blanking/piercing through introduction of hard tool coatings. Results show that hard PVD coatings can be successfully used in blanking/piercing...... critical value under dry friction conditions and leads to tool failure. Therefore, at present oxidation and temperature resistant hard coatings can give improved wear resistance of stamping tools, but elimination of lubricants in blanking and piercing processes is still not feasible....

  3. Blanking and piercing theory, applications and recent experimental results

    International Nuclear Information System (INIS)

    Zaid, A. I. O.

    2013-01-01

    Blanking and piercing are manufacturing processes by which certain geometrical shapes are sheared off a sheet metal. If the sheared off part is the one required, the processes referred to as blanking and if the remaining part in the sheet is the one required, the process is referred to as piercing. In this paper, the theory and practice of these processes are reviewed and discussed The main parameters affecting these processes are presented and discussed. These include: the radial clearance percentage, punch and die geometrical parameters, for example punch and die profile radii. The above mentioned parameters on the force and energy required to effect blanking together with their effect on the quality of the products are also presented and discussed. Recent experimental results together with photomacrographs and photomicrographs are also included and discussed. Finally, the effect of punch and die wear on the quality of the blanks is also given and discussed. (author)

  4. Blanking and piercing theory, applications and recent experimental results

    International Nuclear Information System (INIS)

    Zaid, Adnan l O

    2014-01-01

    Blanking and piercing are manufacturing processes by which certain geometrical shapes are sheared off a sheet metal. If the sheared off part is the one required, the processes referred to as blanking and if the remaining part in the sheet is the one required, the process is referred to as piercing. In this paper, the theory and practice of these processes are reviewed and discussed The main parameters affecting these processes are presented and discussed. These include: the radial clearance percentage, punch and die geometrical parameters, for example punch and die profile radii. The abovementioned parameters on the force and energy required to effect blanking together with their effect on the quality of the products are also presented and discussed. Recent experimental results together with photomacrographs and photomicrographs are also included and discussed. Finally, the effect of punch and die wear on the quality of the blanks is alsogiven and discussed

  5. 3D finite element modelling of sheet metal blanking process

    Science.gov (United States)

    Bohdal, Lukasz; Kukielka, Leon; Chodor, Jaroslaw; Kulakowska, Agnieszka; Patyk, Radoslaw; Kaldunski, Pawel

    2018-05-01

    The shearing process such as the blanking of sheet metals has been used often to prepare workpieces for subsequent forming operations. The use of FEM simulation is increasing for investigation and optimizing the blanking process. In the current literature a blanking FEM simulations for the limited capability and large computational cost of the three dimensional (3D) analysis has been largely limited to two dimensional (2D) plane axis-symmetry problems. However, a significant progress in modelling which takes into account the influence of real material (e.g. microstructure of the material), physical and technological conditions can be obtained by using 3D numerical analysis methods in this area. The objective of this paper is to present 3D finite element analysis of the ductile fracture, strain distribution and stress in blanking process with the assumption geometrical and physical nonlinearities. The physical, mathematical and computer model of the process are elaborated. Dynamic effects, mechanical coupling, constitutive damage law and contact friction are taken into account. The application in ANSYS/LS-DYNA program is elaborated. The effect of the main process parameter a blanking clearance on the deformation of 1018 steel and quality of the blank's sheared edge is analyzed. The results of computer simulations can be used to forecasting quality of the final parts optimization.

  6. Blanking Clearance and Punch Velocity Effects on The Sheared Edge Characteristic in Micro-Blanking of Commercially Pure Copper Sheet

    Directory of Open Access Journals (Sweden)

    Didin Zakaria Lubis

    2017-11-01

    Full Text Available This study aims to identify the influences between clearance and punch velocity on the part edge quality of blanked parts. Experiments have been conducted using material copper, punch-die clearance and punch velocity variations. In order to determine the reachable punch-die clearance and punch velocity required for blanking. The quality of the part-edge characteristics shows that higher punch velocity and decreases clearance value can improve the part-edge quality, resulting in smaller burr height and rollover, and a larger shear zone. Furthermore, it could be observed that the part-edge quality improvement when blanking with high punch velocity is much more distinct for stele than for copper. According to blanking theory, this improvement was expected because copper have much higher heat conduction coefficients. Therefore, the heat dissipates faster and the desired stress relief effect does not take place to the same degree as for stele.

  7. Blanking Clearance and Punch Velocity Effects on The Sheared Edge Characteristic in Micro-Blanking of Commercially Pure Copper Sheet

    OpenAIRE

    Didin Zakaria Lubis; Ichsan Ristiawan

    2017-01-01

    This study aims to identify the influences between clearance and punch velocity on the part edge quality of blanked parts. Experiments have been conducted using material copper, punch-die clearance and punch velocity variations. In order to determine the reachable punch-die clearance and punch velocity required for blanking. The quality of the part-edge characteristics shows that higher punch velocity and decreases clearance value can improve the part-edge quality, resulting in smaller burr h...

  8. Improving friction stir welding of blanks of different thicknesses

    Energy Technology Data Exchange (ETDEWEB)

    Fratini, L. [Dipartimento di Tecnologia Meccanica, Produzione e Ingegneria Gestionale, Universita di Palermo, Viale delle Scienze, 90128 Palermo (Italy)], E-mail: abaqus@dtpm.unipa.it; Buffa, G. [Dipartimento di Tecnologia Meccanica, Produzione e Ingegneria Gestionale, Universita di Palermo, Viale delle Scienze, 90128 Palermo (Italy); Shivpuri, R. [Ohio State University, Department of Industrial, Welding and Systems Engineering, 1971 Neil Avenue, 210 Baker Systems, Columbus, Ohio 43210 (United States)

    2007-06-25

    Friction stir welding (FSW) appears to be a promising process even in the welding of blanks of different thicknesses. Actually, such particular tailor welded blanks (TWBs) are usually characterized by a reduction in ductility due to the utilized fusion welding process. In this paper the authors, starting from a preliminary feasibility study, investigate the possibility to improve the mechanical performances of friction stir welded blanks of aluminum alloy with different thicknesses. Both experiments and a FE analyses are developed for a few case studies with different thickness ratios between the blanks. The numerical investigations are performed with the aim to highlight the material temperature distribution during the process in order to determine process conditions for which an almost symmetric thermal flow is obtained in the two blanks of the joint. In this way, a few simple process design rules are derived and verified through experiments. In particular a thickness ratio up to 2 was considered and a joint resistance of about the 80% of the parent material ultimate tensile strength was observed.

  9. Improving friction stir welding of blanks of different thicknesses

    International Nuclear Information System (INIS)

    Fratini, L.; Buffa, G.; Shivpuri, R.

    2007-01-01

    Friction stir welding (FSW) appears to be a promising process even in the welding of blanks of different thicknesses. Actually, such particular tailor welded blanks (TWBs) are usually characterized by a reduction in ductility due to the utilized fusion welding process. In this paper the authors, starting from a preliminary feasibility study, investigate the possibility to improve the mechanical performances of friction stir welded blanks of aluminum alloy with different thicknesses. Both experiments and a FE analyses are developed for a few case studies with different thickness ratios between the blanks. The numerical investigations are performed with the aim to highlight the material temperature distribution during the process in order to determine process conditions for which an almost symmetric thermal flow is obtained in the two blanks of the joint. In this way, a few simple process design rules are derived and verified through experiments. In particular a thickness ratio up to 2 was considered and a joint resistance of about the 80% of the parent material ultimate tensile strength was observed

  10. Topical erythromycin vs blank vehicle in a multiclinic acne study.

    Science.gov (United States)

    Jones, E L; Crumley, A F

    1981-09-01

    A stable solution of erythromycin was developed using a vehicle of ethanol, propylene glycol, and citric acid buffer. In a controlled, randomized, double-blind comparison, a 2% solution of erythromycin applied to moderately severe facial acne was found to be superior to the blank vehicle in reducing the number of inflamed papules. During a period of 12 weeks, such papules were reduced by 56% in the erythromycin group, compared with 33% in the blank vehicle group. In the erythromycin group, 62% of the subjects had a good or excellent response, compared with 27% of those in the blank vehicle group. Adverse effects were similar in type in both groups and included redness, scaling, dryness, oiliness, burning, itching, and irritation of the eyes. No allergic reactions or skin infections were encountered.

  11. PULSED MODE LASER CUTTING OF SHEETS FOR TAILORED BLANKS

    DEFF Research Database (Denmark)

    Bagger, Claus; Olsen, Flemming Ove

    1999-01-01

    This paper describes how the laser cutting process can be optimised in such a way that the cut sheets can subsequently be used to laser weld tailored blanks. In a number of systematic laboratory experiments the effect of cutting speed, assist gas pressure, average laser power and pulse energy...... item for parameter optimisation of laser cut sheets used for tailored blanks. It was concluded that high quality cut edges with a squareness as small as 0.015 mm may be obtained. Such edges are well suited for subsequent laser welding....... was analysed. For quality assessment the squareness, roughness and dross attachment of laser cut blanks were measured. In all tests, the medium strength steel GA 260 with a thickness of 1.8 mm was used. In this work it has been successfully demonstrated that the squareness of a cut can be used as a quality...

  12. Optimization of blanking process using neural network simulation

    International Nuclear Information System (INIS)

    Hambli, R.

    2005-01-01

    The present work describes a methodology using the finite element method and neural network simulation in order to predict the optimum punch-die clearance during sheet metal blanking processes. A damage model is used in order to describe crack initiation and propagation into the sheet. The proposed approach combines predictive finite element and neural network modeling of the leading blanking parameters. Numerical results obtained by finite element computation including damage and fracture modeling were utilized to train the developed simulation environment based on back propagation neural network modeling. The comparative study between the numerical results and the experimental ones shows the good agreement. (author)

  13. Super-Resolution Algorithm in Cumulative Virtual Blanking

    Science.gov (United States)

    Montillet, J. P.; Meng, X.; Roberts, G. W.; Woolfson, M. S.

    2008-11-01

    The proliferation of mobile devices and the emergence of wireless location-based services have generated consumer demand for precise location. In this paper, the MUSIC super-resolution algorithm is applied to time delay estimation for positioning purposes in cellular networks. The goal is to position a Mobile Station with UMTS technology. The problem of Base-Stations herability is solved using Cumulative Virtual Blanking. A simple simulator is presented using DS-SS signal. The results show that MUSIC algorithm improves the time delay estimation in both the cases whether or not Cumulative Virtual Blanking was carried out.

  14. 17 CFR 230.419 - Offerings by blank check companies.

    Science.gov (United States)

    2010-04-01

    ... derivative securities relating to securities held in the escrow or trust account may be exercised or... other derivative securities issued in the initial offering are exercisable, there is a continuous... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Offerings by blank check...

  15. Dogs can discriminate human smiling faces from blank expressions.

    Science.gov (United States)

    Nagasawa, Miho; Murai, Kensuke; Mogi, Kazutaka; Kikusui, Takefumi

    2011-07-01

    Dogs have a unique ability to understand visual cues from humans. We investigated whether dogs can discriminate between human facial expressions. Photographs of human faces were used to test nine pet dogs in two-choice discrimination tasks. The training phases involved each dog learning to discriminate between a set of photographs of their owner's smiling and blank face. Of the nine dogs, five fulfilled these criteria and were selected for test sessions. In the test phase, 10 sets of photographs of the owner's smiling and blank face, which had previously not been seen by the dog, were presented. The dogs selected the owner's smiling face significantly more often than expected by chance. In subsequent tests, 10 sets of smiling and blank face photographs of 20 persons unfamiliar to the dogs were presented (10 males and 10 females). There was no statistical difference between the accuracy in the case of the owners and that in the case of unfamiliar persons with the same gender as the owner. However, the accuracy was significantly lower in the case of unfamiliar persons of the opposite gender to that of the owner, than with the owners themselves. These results suggest that dogs can learn to discriminate human smiling faces from blank faces by looking at photographs. Although it remains unclear whether dogs have human-like systems for visual processing of human facial expressions, the ability to learn to discriminate human facial expressions may have helped dogs adapt to human society.

  16. Tailor-made blanks for the aircraft industry

    NARCIS (Netherlands)

    Zad Poor, A.A.

    2010-01-01

    Tailor-Made Blanks (TMBs) are hybrid assemblies made of sheet metals with different materials and/or thicknesses that are joined together prior to forming. Alternatively, a monolithic sheet can be machined to create required thickness variations (machined TMBs). The possibility of having several

  17. ZERODUR 4-m blank surviving up to 20 g acceleration

    Science.gov (United States)

    Westerhoff, Thomas; Werner, Thomas; Gehindy, Thorsten

    2017-09-01

    The glass ceramic ZERODUR developed as astronomical telescope mirror substrate material has been widely used in many telescopes due to its excellent small coefficient of thermal expansion. Many large and medium sized mirror substrate blanks have been delivered in the almost 50 years of ZERODUR business so far. Packaging and transportation of mirror substrates of 4 to 8 m in diameter with a weight between 3 and 20 tons requires special attention and sophisticated skills to successful deliver the blanks to their destination at polishing shops all over the world. Typically, a combination of road and sea transport needs to be organized. The requirements on the transport container are depending on the transport route and may vary from destination to destination. In any case the container needs to be able to sufficiently support the multi ton ZERODUR blank to avoid breaking under gravity. Additionally, the configuration needs to be able to absorb shocks happening during transport and loading between truck trailer and ship. For insurance reasons the transport container is always equipped with a GPS trackable shock recorder allowing to download the recorded accelerations on the container and the blank throughout the entire journey. This paper reports on the event of a 4 m class ZERODUR blank exposed to shocks up to 20 g during transport. The event will be discussed in detail together with lessons learned to avoid such events for future transports. Additionally, the 20 g acceleration will be discussed in respect to the data on bending strength for ZERODUR ground surfaces reported in numerous papers by Peter Hartmann et.al. in the last couple of years.

  18. FSW of Aluminum Tailor Welded Blanks across Machine Platforms

    Energy Technology Data Exchange (ETDEWEB)

    Hovanski, Yuri; Upadhyay, Piyush; Carlson, Blair; Szymanski, Robert; Luzanski, Tom; Marshall, Dustin

    2015-02-16

    Development and characterization of friction stir welded aluminum tailor welded blanks was successfully carried out on three separate machine platforms. Each was a commercially available, gantry style, multi-axis machine designed specifically for friction stir welding. Weld parameters were developed to support high volume production of dissimilar thickness aluminum tailor welded blanks at speeds of 3 m/min and greater. Parameters originally developed on an ultra-high stiffness servo driven machine where first transferred to a high stiffness servo-hydraulic friction stir welding machine, and subsequently transferred to a purpose built machine designed to accommodate thin sheet aluminum welding. The inherent beam stiffness, bearing compliance, and control system for each machine were distinctly unique, which posed specific challenges in transferring welding parameters across machine platforms. This work documents the challenges imposed by successfully transferring weld parameters from machine to machine, produced from different manufacturers and with unique control systems and interfaces.

  19. On Number of Almost Blank Subframes in Heterogeneous Cellular Networks

    OpenAIRE

    Cierny, Michal; Wang, Haining; Wichman, Risto; Ding, Zhi; Wijting, Carl

    2013-01-01

    In heterogeneous cellular scenarios with macrocells, femtocells or picocells users may suffer from significant co-channel cross-tier interference. To manage this interference 3GPP introduced almost blank subframe (ABSF), a subframe in which the interferer tier is not allowed to transmit data. Vulnerable users thus get a chance to be scheduled in ABSFs with reduced cross-tier interference. We analyze downlink scenarios using stochastic geometry and formulate a condition for the required number...

  20. Process Design of Aluminum Tailor Heat Treated Blanks

    Directory of Open Access Journals (Sweden)

    Alexander Kahrimanidis

    2015-12-01

    Full Text Available In many industrials field, especially in the automotive sector, there is a trend toward lightweight constructions in order to reduce the weight and thereby the CO2 and NOx emissions of the products. An auspicious approach within this context is the substitution of conventional deep drawing steel by precipitation hardenable aluminum alloys. However, based on the low formability, the application for complex stamping parts is challenging. Therefore, at the Institute of Manufacturing Technology, an innovative technology to enhance the forming limit of these lightweight materials was invented. The key idea of the so-called Tailor Heat Treated Blanks (THTB is optimization of the mechanical properties by local heat treatment before the forming operation. An accurate description of material properties is crucial to predict the forming behavior of tailor heat treated blanks by simulation. Therefore, within in this research project, a holistic approach for the design of the THTB process in dependency of the main influencing parameters is presented and discussed in detail. The capability of the approach for the process development of complex forming operations is demonstrated by a comparison of local blank thickness of a tailgate with the corresponding results from simulation.

  1. Browse Title Index

    African Journals Online (AJOL)

    Items 251 - 300 of 506 ... Vol 71, No 2 (2009), Individual tree growth differences in a clonal eucalypt blanking ... tenure and policy, domestication, intellectual property rights and ... in Eucalyptus grandis stands not subjected to soil water deficits: ...

  2. Taking Leave?

    CERN Multimedia

    2000-01-01

    Planning a holiday? Then if you're a member of the personnel, you'll need to use the Laboratory's new leave system that will be put in place on 1 October. Leave allocations don't change - you are entitled to just as much holiday as before - but instead of being credited annually, your leave will be credited on a monthly basis, and this information will be communicated on your salary slip. The reason for the change is that with the various new leave schemes such as Recruitment by Saved Leave (RSL) and the Progressive Retirement Programme (PRP), a streamlined procedure was required for dealing with all kinds of leave. In the new system, each member of the personnel will have leave accounts to which leave will be credited monthly from the payroll and debited each time an absence is registered in the CERN Electronic Document Handling system (EDH). Leave balances will appear on monthly pay slips, and full details of leave transactions and balances will be available through EDH at all times. As the leave will be c...

  3. The Psychological Concepts in Taylor Swift's "Blank Space"

    OpenAIRE

    Anindhita, Novia Putri

    2016-01-01

    Blank Space” is a song that is sung by a singer, Taylor Swift. The lyrics tell about the lonely woman who dates a lot but always fails to manage her relationship. However, it does not make her worry to start a new relationship. The purpose of this study is to analyze the elements of the poetry in the lyrics and to show the readers the psychological contents as portrayed in the music video. The study uses intrinsic and extrinsic theories to analyze the data and library research to compile the...

  4. Die betekenis wat geld vir blankes en kleurlinge inhou

    Directory of Open Access Journals (Sweden)

    D. L. Visagie

    1978-11-01

    ‘n Oorsig van relevante literatuur dui daarop dat die betekenis van geld (wat 'n belangrike plek in sekere motiveringsteorieë inneem van persoon tot persoon kan verskil. Hierdie verskil kan hoofsaaklik aan persoonlike- en agtergrondsfaktore toegeskryf word. Wanneer die genoemde faktore binne groepsverband ooreenstem, ontwikkel en vorm daar unieke “groepsbetekenisse" wat aan sekere begrippe geheg word. Betekenismeting wat in hierdie ondersoek deur middel van die semantiese differensiaal op 128 Blanke- en 109 Kleurlingstudente uitgevoer is, toon egter oor die algemeen geen beduidende verskil ten opsigte van die begrip geld nie. Slegs ten opsigte van twee van 15 semantiese skale is beduidende verskille tussen die twee groepe gevind.

  5. Numerical investigation of blanking for metal polymer sandwich sheets

    Directory of Open Access Journals (Sweden)

    Gutknecht Florian

    2016-01-01

    Full Text Available Metal polymer sandwich sheets consist of materials with drastically different mechanical properties. Due to this fact and because of high local gradients in the cutting zone during the blanking process, traditional process strategies and empirical knowledge are difficult to apply. A finite-element simulation of the shear cutting process is used to predict the necessary force and the geometry of the cutting surface. A fully-coupled ductile damage model is used for the description of the material behaviour. This model considers the influence of shear and compression-dominated stress states on the initiation of damage. Experimental tensile and compression test data is used for the identification of material parameters. The results of the blanking simulation are compared with experimental data. Furthermore, the evolution of the stress state is analysed to gain understanding of the underlying physics. Finally this model enables the prediction of core compression and other quantities such as the acting stresses and corresponding triaxilities, which provide valuable information for the development of analytical models.

  6. Browse Title Index

    African Journals Online (AJOL)

    2004): Special Issue 2004, Differential production of immune parameters by mouse strains ... agglutination and complement fixation tests in the field diagnosis ... List All Titles · Free To Read Titles This Journal is Open Access.

  7. Title IX Resource Guide

    Science.gov (United States)

    Office for Civil Rights, US Department of Education, 2015

    2015-01-01

    Title IX of the Education Amendments of 1972 (Title IX) prohibits discrimination based on sex in education programs and activities in federally funded schools at all levels. If any part of a school district or college receives any Federal funds for any purpose, all of the operations of the district or college are covered by Title IX. The essence…

  8. Application of the diode laser for welding in tairoled blanks

    International Nuclear Information System (INIS)

    Bocos, J. L.; Zubiri, F.; Garciandia, F.; Pena, J.; Cortiella, A.; Berrueta, J. M.; Zapirain, F.

    2004-01-01

    During the last years, one of the most interesting subjects in the automotive industry is the weight reduction of the automobile, and so to diminish the fuel consumption. Among other performance, the use in the body car of materials which have high mechanical resistance must be considered for the weight reduction of the automobile and maintaining high benefits. In this work, it has been studied the utilization of the diode laser for high resistance steel sheets welding, concretely microalloying steels (ZStE), DP dual phase and TRIP transformation induced plasticity. These steels can be employed in tailored blanks, which are defined as two or more separate pieces of flat material of dissimilar thickness and/or physical properties joined together before forming, to provide superior qualities in the finished stamped part. In this study, the metallographic characterization has been realised in the welding seams, and the mechanical behaviour has been analysed employing the following tests: microhardenss, drawing, tensile and fatigue. (Author) 15 refs

  9. Application Of CO2 Lasers To High Speed Blanking

    Science.gov (United States)

    Grenier, L. E.

    1986-11-01

    While laser cutting of sheetmetal has attained wide acceptance in the automotive industry for the purposes of prototyping and very limited preproduction work, the production rates possible with currently available systems have precluded the use of this technique in a production environment. The device design to be described embodies a high speed X-Y positioner carrying a cutting head with limited Z-axis capability. This approach confers two main benefits, first, production rate is limited only by laser power, since the positioner technology selected will permit movement at rates up to 1.5 m/s (60 in/s), second, the use of a high speed non-contact surface follower to control the Z-axis movement reduces the need to clamp the workpiece rigidly to a precision reference surface. The realized reduction of the clamping requirement permits some latitude in the feed methods that can be employed, allowing the use of coil or sheet feeding as appropriate. The author will provide estimated production rates for the proposed design and demonstrate that a suitable choice of laser source and material feed will permit the production of parts at a rate and cost comparable to conventional blanking with the advantage of much greater flexibility and reduced retooling time.

  10. Centrifugal vacuum casting for fuel cladding tube blanks

    International Nuclear Information System (INIS)

    Zelenskii, V.F.; Neklyudov, I.M.; Chernyi, B.P.; Zeidlits, M.P.; Vanzha, A.F.; Rubashko, V.G.; Ryabchikov, L.N.; Smirnov, Y.K.; Bespalova, V.R.; Mashkarova, V.T.; Rybal'chenko, N.D.

    1990-01-01

    An advanced technique for making tube blanks with an acceptable level of nonmetallic inclusions is vacuum induction melting combined with centrifugal casting, as the latter gives a cylindrical casting having an axial hole, while the cast metal has elevated density and contains fewer nonmetallic inclusions than does the metal cast in a stationary mold. The reduction in the nonmetallic inclusions occurs because of increased rates of floating up in the rotating mold on account of the centrifugal force and the rejection to the inner surface. One can choose the parameters such as the pouring speed, rotational speed, mold cooling, and liquid-metal temperature and can introduce a deoxidizer to remove the nonmetallic inclusions or reduce the grain size of them and produce an appropriate cast structure and obtain a metal whose quality is the same as that on vacuum induction melting with secondary arc remelting. For these purposes, the authors have developed centrifugal-casting machines for use under vacuum or in inert gases with horizontal and vertical mold rotation axes

  11. Metal flow of a tailor-welded blank in deep drawing process

    Science.gov (United States)

    Yan, Qi; Guo, Ruiquan

    2005-01-01

    Tailor welded blanks were used in the automotive industry to consolidate parts, reduce weight, and increase safety. In recent years, this technology was developing rapidly in China. In Chinese car models, tailor welded blanks had been applied in a lot of automobile parts such as rail, door inner, bumper, floor panel, etc. Concerns on the properties of tailor welded blanks had become more and more important for automobile industry. A lot of research had shown that the strength of the welded seam was higher than that of the base metal, such that the weld failure in the aspect of strength was not a critical issue. However, formability of tailor welded blanks in the stamping process was complex. Among them, the metal flow of tailor welded blanks in the stamping process must be investigated thoroughly in order to reduce the scrap rate during the stamping process in automobile factories. In this paper, the behavior of metal flow for tailor welded blanks made by the laser welding process with two types of different thickness combinations were studied in the deep drawing process. Simulations and experiment verification of the movement of weld line for tailor welded blanks were discussed in detail. Results showed that the control on the movement of welded seam during stamping process by taking some measures in the aspect of blank holder was effective.

  12. Application of Hard Coatings for Improved Tribological Performance of Blanking and Piercing Tools

    DEFF Research Database (Denmark)

    Podgornik, B.; Zajec, B.; Bay, Niels

    2010-01-01

    The aim of the present investigation was to examine the possibility of reducing lubrication and replacing expensive tungsten carbide material in blanking/piercing through introduction of hard tool coatings. Results show that hard PVD coatings can be successfully used in blanking/piercing applicat...

  13. Exploring Valued-Added Options - Edge-Glued Panels and Blanks Offer Value-Added Opportunities

    Science.gov (United States)

    Bob Smith; Philip A. Araman

    1997-01-01

    As sawmills search for new opportunities to add value to rough sawn lumber, many consider producing dimension parts as one solution. Assembling dimension parts into edge-glued panels or standard blanks can add even further value. Blanks are defined as pieces of solid wood (which may be edge-glued) that are manufactured to a predetermined size. This article discusses...

  14. Ion beam deposition system for depositing low defect density extreme ultraviolet mask blanks

    Science.gov (United States)

    Jindal, V.; Kearney, P.; Sohn, J.; Harris-Jones, J.; John, A.; Godwin, M.; Antohe, A.; Teki, R.; Ma, A.; Goodwin, F.; Weaver, A.; Teora, P.

    2012-03-01

    Extreme ultraviolet lithography (EUVL) is the leading next-generation lithography (NGL) technology to succeed optical lithography at the 22 nm node and beyond. EUVL requires a low defect density reflective mask blank, which is considered to be one of the top two critical technology gaps for commercialization of the technology. At the SEMATECH Mask Blank Development Center (MBDC), research on defect reduction in EUV mask blanks is being pursued using the Veeco Nexus deposition tool. The defect performance of this tool is one of the factors limiting the availability of defect-free EUVL mask blanks. SEMATECH identified the key components in the ion beam deposition system that is currently impeding the reduction of defect density and the yield of EUV mask blanks. SEMATECH's current research is focused on in-house tool components to reduce their contributions to mask blank defects. SEMATECH is also working closely with the supplier to incorporate this learning into a next-generation deposition tool. This paper will describe requirements for the next-generation tool that are essential to realize low defect density EUV mask blanks. The goal of our work is to enable model-based predictions of defect performance and defect improvement for targeted process improvement and component learning to feed into the new deposition tool design. This paper will also highlight the defect reduction resulting from process improvements and the restrictions inherent in the current tool geometry and components that are an impediment to meeting HVM quality EUV mask blanks will be outlined.

  15. Single point incremental forming of tailored blanks produced by friction stir welding

    DEFF Research Database (Denmark)

    Silva, M.B.; Skjødt, Martin; Vilaca, P.

    2009-01-01

    fromthe rotating single point-forming tool. Formability of the tailor welded blanks (TWB) is evaluated by means of benchmark tests carried out on truncated conical and pyramidal shapes and results are compared with similar tests performed on conventional reference blanks of the same material. Results show......This paper is focused on the single point incremental forming (SPIF) of tailored welded blanks produced by friction stirwelding (FSW). Special emphasis is placed on the know-how for producing the tailored blanks and on the utilization of innovative forming strategies to protect thewelding joint...... that the combination of SPIF with tailored welded blanks produced by FSW seems promising in the manufacture of complex sheet metal parts with high depths....

  16. Low-defect reflective mask blanks for extreme ultraviolet lithography

    International Nuclear Information System (INIS)

    Burkhart, S C; Cerjarn, C; Kearney, P; Mirkarimi, P; Ray-Chaudhuri, A; Walton, C.

    1999-01-01

    Extreme Ultraviolet Lithgraphy (EUVL) is an emerging technology for fabrication of sub-100 nm feature sizes on silicon, following the SIA road map well into the 21st century. The specific EUVL system described is a scanned, projection lithography system with a 4:1 reduction, using a laser plasma EUV source. The mask and all of the system optics are reflective, multilayer mirrors which function in the extreme ultraviolet at 13.4 nm wavelength. Since the masks are imaged to the wafer exposure plane, mask defects greater than 80% of the exposure plane CD (for 4:1 reduction) will in many cases render the mask useless, whereas intervening optics can have defects which are not a printing problem. For the 100 nm node, we must reduce defects to less than 0.01/cm ampersand sup2; at sign 80nm or larger to obtain acceptable mask production yields. We have succeeded in reducing the defects to less than 0.1/cm ampersand sup2; for defects larger than 130 nm detected by visible light inspection tools, however our program goal is to achieve 0.01/cm ampersand sup2; in the near future. More importantly though, we plan to have a detailed understanding of defect origination and the effect on multilayer growth in order to mitigate defects below the 10 -2 /cm ampersand sup2; level on the next generation of mask blank deposition systems. In this paper we will discuss issues and results from the ion-beam multilayer deposition tool, details of the defect detection and characterization facility, and progress on defect printability modeling

  17. Browse Title Index

    African Journals Online (AJOL)

    Items 151 - 200 of 229 ... Browse Title Index ... Issue, Title. Vol 14, No 2 ... Vol 15, No 1 (2017), Qualitative and quantitative methods of suicide research in old age, Abstract PDF ... Vol 11, No 2 (2013), Simple Algorithm in the Management of Fetal ...

  18. Browse Title Index

    African Journals Online (AJOL)

    Items 201 - 250 of 488 ... African Journal of Paediatric Surgery. ... Ileocecal valve atresia: Introduction of a new surgical approach ... Vol 4, No 1 (2007), Isolated Bilateral Macrostomia: Case Series and ... Vol 9, No 2 (2012), Laparoscopic inguinal hernia repair in ... List All Titles · Free To Read Titles This Journal is Open Access.

  19. Browse Title Index

    African Journals Online (AJOL)

    Items 601 - 650 of 788 ... Browse Title Index ... Issue, Title ... Vol 14, No 1 (2006), Social science research: a critique of quantitative and qualitative methods ... Vol 18, No 1 (2010), Stress among part-time business students: a study in a Ghanaian ...

  20. Title to mining properties

    International Nuclear Information System (INIS)

    Crouch, K.M.

    1976-01-01

    The requirements of the law which must be met in order to create title to an unpatented mining claim and the procedures which should be followed when an attempt is made to determine the title to the claim is acceptable are reviewed

  1. Three-dimensional characterization of extreme ultraviolet mask blank defects by interference contrast photoemission electron microscopy.

    Science.gov (United States)

    Lin, Jingquan; Weber, Nils; Escher, Matthias; Maul, Jochen; Han, Hak-Seung; Merkel, Michael; Wurm, Stefan; Schönhense, Gerd; Kleineberg, Ulf

    2008-09-29

    A photoemission electron microscope based on a new contrast mechanism "interference contrast" is applied to characterize extreme ultraviolet lithography mask blank defects. Inspection results show that positioning of interference destructive condition (node of standing wave field) on surface of multilayer in the local region of a phase defect is necessary to obtain best visibility of the defect on mask blank. A comparative experiment reveals superiority of the interference contrast photoemission electron microscope (Extreme UV illumination) over a topographic contrast one (UV illumination with Hg discharge lamp) in detecting extreme ultraviolet mask blank phase defects. A depth-resolved detection of a mask blank defect, either by measuring anti-node peak shift in the EUV-PEEM image under varying inspection wavelength condition or by counting interference fringes with a fixed illumination wavelength, is discussed.

  2. Die rol van die blanke werker in die motivering van die swart werker

    Directory of Open Access Journals (Sweden)

    G. J. Oosthuizen

    1980-11-01

    Opsomming Die motivering van die Swart werker kan nie in die huidige situasie in isolasie bestudeer word nie, omdat die Blanke werker steeds in die bestuursposisie is en daarom die motivering van die Swart werker kan beïnvloed. Hierdie ondersoek was daarop gerig om die rol van die Blanke werker in die motivering van die Swart werker nader te ondersoek. Die houding en die leierskapsbenadering van die Blanke werker teenoor die Swart werker is gemeet, asook die behoeftes wat volgens die Blanke werker by die Swart werker bestaan, bevredig is, of nie bestaan nie. Die behoeftes van Swart werkers, soos deur hulleself gesien, is ook ondersoek. Ten opsigte van sekere aspekte is beduidende verskille gevind.

  3. Attenuated phase-shift mask (PSM) blanks for flat panel display

    Science.gov (United States)

    Kageyama, Kagehiro; Mochizuki, Satoru; Yamakawa, Hiroyuki; Uchida, Shigeru

    2015-10-01

    The fine pattern exposure techniques are required for Flat Panel display applications as smart phone, tablet PC recently. The attenuated phase shift masks (PSM) are being used for ArF and KrF photomask lithography technique for high end pattern Semiconductor applications. We developed CrOx based large size PSM blanks that has good uniformity on optical characteristics for FPD applications. We report the basic optical characteristics and uniformity, stability data of large sized CrOx PSM blanks.

  4. The information gained from witnesses' responses to an initial "blank" lineup.

    Science.gov (United States)

    Palmer, Matthew A; Brewer, Neil; Weber, Nathan

    2012-10-01

    Wells ("The psychology of lineup identifications," Journal of Applied Social Psychology, 1984, 14, 89-103) proposed that a blank lineup (an initial lineup of known-to-be-innocent foils) can be used to screen eyewitnesses; witnesses who chose from a blank lineup (initial choosers) were more likely to make an error on a second lineup that contained a suspect than were witnesses who rejected a blank lineup (initial nonchoosers). Recent technological advances (e.g., computer-administered lineups) may overcome many of the practical difficulties cited as a barrier to the use of blank lineups. Our research extended knowledge about the blank lineup procedure by investigating the underlying causes of the difference in identification performance between initial choosers and initial nonchoosers. Studies 1a and 1b (total, N = 303) demonstrated that initial choosers were more likely to reject a second lineup than initial nonchoosers and witnesses who did not view a blank lineup, implying that cognitive biases (e.g., confirmation bias and commitment effects) influenced initial choosers' identification decisions. In Study 2 (N = 200), responses on a forced-choice identification test provided evidence that initial choosers have, on average, poorer memories for the culprit than do initial nonchoosers. We also investigated the usefulness of blank lineups for interpreting identification evidence. Diagnosticity ratios suggested that suspect identifications made by initial nonchoosers (cf. initial choosers) should have a greater impact on estimates of the likely guilt of the suspect. Furthermore, for initial nonchoosers, higher confidence in blank lineup rejections was associated with higher diagnosticity for subsequent suspect identifications. These results have implications for policy to guide the collection and interpretation of identification evidence. PsycINFO Database Record (c) 2012 APA, all rights reserved.

  5. When the Ostrich-Algorithm Fails: Blanking Method Affects Spike Train Statistics

    Directory of Open Access Journals (Sweden)

    Kevin Joseph

    2018-04-01

    Full Text Available Modern electroceuticals are bound to employ the usage of electrical high frequency (130–180 Hz stimulation carried out under closed loop control, most prominent in the case of movement disorders. However, particular challenges are faced when electrical recordings of neuronal tissue are carried out during high frequency electrical stimulation, both in-vivo and in-vitro. This stimulation produces undesired artifacts and can render the recorded signal only partially useful. The extent of these artifacts is often reduced by temporarily grounding the recording input during stimulation pulses. In the following study, we quantify the effects of this method, “blanking,” on the spike count and spike train statistics. Starting from a theoretical standpoint, we calculate a loss in the absolute number of action potentials, depending on: width of the blanking window, frequency of stimulation, and intrinsic neuronal activity. These calculations were then corroborated by actual high signal to noise ratio (SNR single cell recordings. We state that, for clinically relevant frequencies of 130 Hz (used for movement disorders and realistic blanking windows of 2 ms, up to 27% of actual existing spikes are lost. We strongly advice cautioned use of the blanking method when spike rate quantification is attempted.Impact statementBlanking (artifact removal by temporarily grounding input, depending on recording parameters, can lead to significant spike loss. Very careful use of blanking circuits is advised.

  6. When the Ostrich-Algorithm Fails: Blanking Method Affects Spike Train Statistics.

    Science.gov (United States)

    Joseph, Kevin; Mottaghi, Soheil; Christ, Olaf; Feuerstein, Thomas J; Hofmann, Ulrich G

    2018-01-01

    Modern electroceuticals are bound to employ the usage of electrical high frequency (130-180 Hz) stimulation carried out under closed loop control, most prominent in the case of movement disorders. However, particular challenges are faced when electrical recordings of neuronal tissue are carried out during high frequency electrical stimulation, both in-vivo and in-vitro . This stimulation produces undesired artifacts and can render the recorded signal only partially useful. The extent of these artifacts is often reduced by temporarily grounding the recording input during stimulation pulses. In the following study, we quantify the effects of this method, "blanking," on the spike count and spike train statistics. Starting from a theoretical standpoint, we calculate a loss in the absolute number of action potentials, depending on: width of the blanking window, frequency of stimulation, and intrinsic neuronal activity. These calculations were then corroborated by actual high signal to noise ratio (SNR) single cell recordings. We state that, for clinically relevant frequencies of 130 Hz (used for movement disorders) and realistic blanking windows of 2 ms, up to 27% of actual existing spikes are lost. We strongly advice cautioned use of the blanking method when spike rate quantification is attempted. Blanking (artifact removal by temporarily grounding input), depending on recording parameters, can lead to significant spike loss. Very careful use of blanking circuits is advised.

  7. Wear of different PVD coatings at industrial fine-blanking field tests

    Directory of Open Access Journals (Sweden)

    Liina Lind

    2015-09-01

    Full Text Available Thin hard physical vapor deposited (PVD coatings play significant role on wear performance of fine-blanking punches in the presence of extremely high contact stresses. Nevertheless it seems that in blanking or fine-blanking the coatings are selected based on coincidence, trial-error-method or latest trends. There is limited information about planning and conducting the fine-blanking industrial field tests and measuring the wear of different coatings. In the present study a set of fine-blanking punches and laboratory specimens were prepared with three coatings – TiCN, nACRo and nACo. As substrate material Böhler S390 Microclean high speed steel was used. Coating mechanical properties (modulus of elasticity and nanohardness were measured and wear rate with alumina ball was determined using the reciprocating sliding test. Wear of coatings was measured from punches after industrial use. All of the tested coatings showed high variance of wear. However coatings nACo and nACRo have better average wear resistance in fine-blanking compared with the well-known TiCN. Industrial field tests show correlation to the ratio elastic strain to failure H/E.DOI: http://dx.doi.org/10.5755/j01.ms.21.3.7249

  8. High-speed blanking of copper alloy sheets: Material modeling and simulation

    Science.gov (United States)

    Husson, Ch.; Ahzi, S.; Daridon, L.

    2006-08-01

    To optimize the blanking process of thin copper sheets ( ≈ 1. mm thickness), it is necessary to study the influence of the process parameters such as the punch-die clearance and the wear of the punch and the die. For high stroke rates, the strain rate developed in the work-piece can be very high. Therefore, the material modeling must include the dynamic effects.For the modeling part, we propose an elastic-viscoplastic material model combined with a non-linear isotropic damage evolution law based on the theory of the continuum damage mechanics. Our proposed modeling is valid for a wide range of strain rates and temperatures. Finite Element simulations, using the commercial code ABAQUS/Explicit, of the blanking process are then conducted and the results are compared to the experimental investigations. The predicted cut edge of the blanked part and the punch-force displacement curves are discussed as function of the process parameters. The evolution of the shape errors (roll-over depth, fracture depth, shearing depth, and burr formation) as function of the punch-die clearance, the punch and the die wear, and the contact punch/die/blank-holder are presented. A discussion on the different stages of the blanking process as function of the processing parameters is given. The predicted results of the blanking dependence on strain-rate and temperature using our modeling are presented (for the plasticity and damage). The comparison our model results with the experimental ones shows a good agreement.

  9. Production of the 4.1-m Zerodur mirror blank for the VISTA Telescope

    Science.gov (United States)

    Doehring, Thorsten; Jedamzik, Ralf; Wittmer, Volker; Thomas, Armin

    2004-09-01

    VISTA (Visible and Infrared Survey Telescope for Astronomy) is designed to be the world's largest wide field telescope. After finishing of the construction the telescope will be part of ESO and located in Chile close to the VLT observatory at Cerro Paranal. In November 2001 SCHOTT was selected by the VISTA project office at the Royal Observatory of Edinburgh to deliver the 4.1 m diameter primary mirror blank. The manufacturing of the mirror blank made from the zero expansion material Zerodur was challenging especially due to the f/1 design. Several tons of the glass ceramic material were removed during the grinding operation. A meniscus blank with a diameter of 4100 mm and a thickness of 171.5 mm was generated, having a large central hole of 1200 mm and an aspherical shape of the concave surface. Also the handling and turning operations needed special effort and were performed by a skilled team. This paper presents details and pictures of the corresponding production and inspection sequence at SCHOTT. The geometrical parameters were measured during manufacturing by help of a laser tracker system and the achieved parameters were compared with the initial technical specification. The final quality inspection verified the excellent quality of the mirror blank. The close co-operation between the astronomers and industry resulted in a project management without problems. In April 2003 the VISTA blank was delivered successfully within a ceremony dedicated to the anniversary of "100 years of astronomical mirror blanks from SCHOTT."

  10. Browse Title Index

    African Journals Online (AJOL)

    1986), University Engineering Education and Training in Nigeria: Development, ... Vol 29, No 1 (2010), Use of Energy Method to Simulate the ... of Optimal Rational Composition of Titles Producible from Nigerian Clays ...

  11. Browse Title Index

    African Journals Online (AJOL)

    Items 1 - 50 of 194 ... Journal Home > Advanced Search > Browse Title Index ... Vol 14, No 1 (2000), A functional categoriality of adjectives in ... Vol 1, No 1 (1987), Alienation and affirmation: The humanistic vision of Bessie Head, Abstract PDF.

  12. Browse Title Index

    African Journals Online (AJOL)

    Items 151 - 200 of 879 ... South African Journal of Higher Education. ... Browse Title Index ... in a USA school setting: Merging transition theory with a narrative approach, Abstract ... Citation analysis of theses and dissertations submitted at the ...

  13. Browse Title Index

    African Journals Online (AJOL)

    Items 601 - 650 of 879 ... South African Journal of Higher Education. ... Browse Title Index .... The challenge of thesis supervision in an art university, Abstract ... No 2 (2004), Robert Sternberg's mental self-government theory and its contribution to ...

  14. Browse Title Index

    African Journals Online (AJOL)

    Items 101 - 150 of 533 ... Southern African Linguistics and Applied Language Studies. ... Issue, Title ... Vol 34, No 1 (2016), Book Review: Qualitative-Quantitative Analyses of .... The complex consonants of simple CV-syllables in Zezuru, Abstract.

  15. Browse Title Index

    African Journals Online (AJOL)

    Items 51 - 100 of 346 ... Journal Home > Advanced Search > Browse Title Index ... and hygiene promotion services in Rungwe district, Tanzania, Abstract .... as seen in NIgerian teaching hospital: pattern and a simple classification, Abstract.

  16. Browse Title Index

    African Journals Online (AJOL)

    Items 151 - 200 of 437 ... Journal Home > Advanced Search > Browse Title Index ... prospects and realistic strategies to its implementation in Nigeria\\'s Institute of ... and Communication Technology (ICT) in information dissemination, Abstract.

  17. Browse Title Index

    African Journals Online (AJOL)

    Items 901 - 950 of 1355 ... Journal of Applied Sciences and Environmental Management. ... Journal Home > Advanced Search > Browse Title Index .... Vol 22, No 2 (2018), Performance evaluation of a locally fabricated sawdust fired oven for ...

  18. Browse Title Index

    African Journals Online (AJOL)

    Items 301 - 350 of 788 ... Journal Home > Advanced Search > Browse Title Index ... Vol 26, No 1 (2018), Gender differentials in the perception of .... Vol 25, No 1 (2017), Impact of total quality management on students' academic performance in ...

  19. Browse Title Index

    African Journals Online (AJOL)

    Items 101 - 150 of 465 ... Journal Home > Advanced Search > Browse Title Index ... and twinning data of an igbo kindred during the Nigerian Civil War, Abstract ... on laboratory estimations with special reference to clinical chemistry, Abstract.

  20. Browse Title Index

    African Journals Online (AJOL)

    Items 251 - 300 of 1260 ... Journal Home > Advanced Search > Browse Title Index ... Consumption of ammonia-nitrogen by aob in immobilized batch culture, Abstract PDF .... Vol 9, No 3S (2017): Special Issue, Design an automatic temperature ...

  1. Browse Title Index

    African Journals Online (AJOL)

    Items 101 - 150 of 294 ... Journal Home > Advanced Search > Browse Title Index. Log in or .... S Edwards, M Hlongwane, J Thwala, N Robinson ... Vol 16, No 1 (2017), Infancy of internet cafe: The substitute of ubuntu-padare pedagogy, Abstract.

  2. Browse Title Index

    African Journals Online (AJOL)

    Items 1 - 50 of 130 ... Journal Home > Advanced Search > Browse Title Index. Log in or ... using the technological pedagogical content knowledge(TPACK) framework, Abstract PDF ... Tamara N. Hrin, Dušica D. Milenković, Mirjana D. Segedinac.

  3. Browse Title Index

    African Journals Online (AJOL)

    Items 101 - 150 of 278 ... Journal Home > Advanced Search > Browse Title Index ... drie paradigmas beskou: 'n eenheid, of 'n veelheid van perspektiewe? ... Vol 45, No 1 (2011), Genre pedagogy in the mediation of socially-situated literacies ...

  4. Browse Title Index

    African Journals Online (AJOL)

    Items 551 - 600 of 879 ... Journal Home > Advanced Search > Browse Title Index ... A James, E Ralfe, L van Laren, N Ngcobo ... 1 (2011), Recognition of prior learning in promoting lifelong learning: A pedagogy of hope or a shattering of dreams?

  5. Browse Title Index

    African Journals Online (AJOL)

    Items 451 - 500 of 533 ... Journal Home > Advanced Search > Browse Title Index .... for past tense forms in Northern Sotho: verb stems with final 'm' and 'n', Abstract ... in an academic writing class: Implications for a dialogic pedagogy, Abstract.

  6. Browse Title Index

    African Journals Online (AJOL)

    Items 101 - 150 of 183 ... Journal Home > Advanced Search > Browse Title Index ... Vol 61 (2017), New interventions and sustainable solutions: .... Vol 35 (2011), Resurgence of tribal levies: Double taxation for the rural poor, Abstract PDF.

  7. Browse Title Index

    African Journals Online (AJOL)

    Items 1 - 50 of 736 ... Journal Home > Advanced Search > Browse Title Index ... Vol 5 (2008), A Contagious Malady: The Human Quest for Truth through Religion, Abstract ... A Study of Politeness Strategies Used by the National University of ...

  8. Browse Title Index

    African Journals Online (AJOL)

    Items 101 - 150 of 414 ... Journal Home > Advanced Search > Browse Title Index. Log in or ... of an algebraic function for the permutation of truth table columns, Abstract ... appraisal and productivity levels in selected Nigerian universities, Abstract.

  9. Browse Title Index

    African Journals Online (AJOL)

    Items 101 - 150 of 879 ... Journal Home > Advanced Search > Browse Title Index ... Vol 20, No 4 (2006), Assessing academic potential for university admission: ... Vol 16, No 2 (2002), Book Review: Rethinking truth by Higgs, P & Smith, J, Details.

  10. Browse Title Index

    African Journals Online (AJOL)

    Items 1 - 50 of 165 ... Journal Home > Advanced Search > Browse Title Index ... Vol 43 (2011), Assessment of the Learning Commons takeoff at the University of ... the archive of South Africa's Truth and Reconciliation Commission, Abstract.

  11. Browse Title Index

    African Journals Online (AJOL)

    Items 1 - 50 of 644 ... Journal Home > Advanced Search > Browse Title Index. Log in or ... Ethics review n international health research: quality assurance or bureaucratic nightmare? Details ... Audit of Management of Open Fractures, Details PDF.

  12. Browse Title Index

    African Journals Online (AJOL)

    Items 651 - 700 of 1199 ... Issue, Title ... Vol 5, No 1 (2011), Motivation, an Essential Ingredient for Optimal Performance in Emerging Markets, Abstract PDF ... Vol 3, No 5 (2009), Multinational transfer pricing and international taxation: what, why, ...

  13. Browse Title Index

    African Journals Online (AJOL)

    Items 51 - 100 of 153 ... Issue, Title. Vol 9, No 2 (2006):, Effects of efficient water utilisation on water resources development in Swaziland under climate change, Abstract .... Ethical, Indigenous and Socio-Economic Perspectives, Abstract.

  14. Browse Title Index

    African Journals Online (AJOL)

    Items 1 - 50 of 98 ... Journal Home > Advanced Search > Browse Title Index ... model for the continued professionalisation of student affairs in Africa, Abstract PDF ... Vol 2, No 2 (2014), Book Review: How College Affects Students, A Third decade ...

  15. Browse Title Index

    African Journals Online (AJOL)

    Items 1 - 50 of 76 ... Journal Home > Advanced Search > Browse Title Index ... Vol 4, No 1 (2011), Automation of AutoCAD for Detailing of Reinforced .... Vol 10, No 1 (2017), Housing data base for sustainable housing provision, Abstract PDF.

  16. Browse Title Index

    African Journals Online (AJOL)

    Items 1 - 50 of 147 ... Journal Home > Advanced Search > Browse Title Index .... Library (TEEAL) Database among faculty members in Federal University, ... Vol 5, No 2 (2014), Effects of corporate culture on the implementation of automation in ...

  17. Browse Title Index

    African Journals Online (AJOL)

    Items 1 - 41 of 41 ... Issue, Title ... Vol 1, No 3 (2004): Special Edition, Assessment of the quality and reserves of Bat ... Vol 1, No 1 (1997), Bovine dermatophilosis in Zambia: epidemiology, socio-economic impacts and future perspectives, Abstract.

  18. Browse Title Index

    African Journals Online (AJOL)

    Items 701 - 750 of 808 ... Issue, Title ... Vol 58, No 2 (2010), Short Communicaton: The socio-economic impact of helminth infections and the ... Vol 62 (2014): Special Edition, Special edition summarizing the scientific discourse which took place ...

  19. Browse Title Index

    African Journals Online (AJOL)

    Items 351 - 391 of 391 ... Issue, Title ... Vol 2, No 3 (1999): Special Edition, The efficacy of low volume application of roundup ... Vol 1, No 1 (1998), The relationships among National Socio-Economic Indicators and Child Health Statistics, Abstract.

  20. Browse Title Index

    African Journals Online (AJOL)

    Items 201 - 250 of 531 ... Journal Home > Advanced Search > Browse Title Index ... thermal conductivity and viscosity in a flat plate solar collector, Abstract PDF .... similarity method in unsteady two-dimensional MHD boundary layer on the body ...

  1. Finite element analysis of the combined fine blanking and extrusion process

    Science.gov (United States)

    Zheng, Peng-Fei

    The combined fine blanking and extrusion process is such a metal forming process that fine blanking and forward extrusion are carried out on sheet metal material at the same time. There are two typical characteristics in this process, one is the fine blanking whose deformation mechanism is different from conventional blanking; the other is the sheet metal extrusion, which is different from the conventional extrusion. Even though fine blanking has been used in industry for many years, only limited literature can be found which deals with the theoretical analysis of it. On the other hand, no publications on the theoretical analysis of the sheet metal extrusion have been found. Intensive work should be carried out to reveal the mechanism of both fine blanking process and sheet metal extrusion process, and further the combined fine blanking and extrusion process. The scope of this thesis is to study the mechanics of fine blanking, sheet metal extrusion, and combined fine blanking and extrusion process one by one with the rigid-plastic finite element method. All of above processes are typical unsteady ones, especially the fine blanking process in which extremely severe and localized deformation occurs. Therefore, commercial programs can not be used to solve these problems up till now. Owing to this reason, a rigid-plastic finite element program was developed for simulating these processes where remeshing and mesh tracing techniques as well as the golden section method were adopted according to the characteristics of these processes in this thesis. Moreover, a permissible kinematic velocity field was adopted as the initial velocity field for simulating extrusion process successfully. Results from the simulation included the distorted mesh, the field of material flow, the stress and the strain distributions at various moments of deformation. Results under different deformation conditions such as different blanking clearances, different diameters of the extrusion punch and

  2. On the Determination of the Blank Shape Contour for Thin Precision Parts Obtained by Stamping

    International Nuclear Information System (INIS)

    Azaouzi, M.; Delameziere, A.; Naceur, H.; Batoz, J. L.; Sibaud, D.; Belouettar, S.

    2007-01-01

    The present study deals with the 'automatic' determination of the initial blank shape contour for 3D thin metallic precision parts obtained by stamping, knowing the 3D CAD geometry of the final part (the desired product). The forming process can involve several steps presented in this paper that consists in applying a heuristic method of optimization to find out the initial blank shape of thin precision metallic part in order to obtain a final part, with a required 3D geometry (specified). The purpose of the present approach is to replace the experimental trial and error optimization method used currently, which is expensive and time consuming. The principle of the 'heuristic' optimization method is to first estimate the blank shape using the Inverse Approach, then to compensate the shape error calculated in each node of the blank contour. The 'heuristic' optimization loop is done using a precise incremental code (Abaqus Explicit or Stampack) and, the iterations loop is stopped when the shape errors are within some initially fixed tolerances. The method is tested in the case of a special stamping process where the parts are pressed in one or more steps using a manual press, without blank holder and by the mean of tools having complex shape. The sensitivities of the process parameters regarding the optimal solution are investigated

  3. Investigation into high-frequency-vibration assisted micro-blanking of pure copper foils

    Directory of Open Access Journals (Sweden)

    Wang Chunju

    2015-01-01

    Full Text Available The difficulties encountered during the manufacture of microparts are often associated with size effects relating to material, process and tooling. Utilizing acoustoplastic softening, achieved through a high-frequency vibration assisted micro-blanking process, was introduced to improve the surface finish in micro-blanking. A frequency of 1.0 kHz was chosen to activate the longitudinal vibration mode of the horn tip, using a piezoelectric actuator. A square hole with dimensions of 0.5 mm × 0.5 mm was made, successfully, from a commercial rolled T2 copper foil with 100 μm in thickness. It was found that the maximum blanking force could be reduced by 5% through utilizing the high-frequency vibration. Proportion of the smooth, burnished area in the cut cross-section increases with an increase of the plasticity to fracture, under the high-frequency vibration, which suggests that the vibration introduced is helpful for inhibiting evolution of the crack due to its acoustoplastic softening effect. During blanking, roughness of the burnished surface could be reduced by increasing the vibration amplitude of the punch, which played a role as surface polishing. The results obtained suggest that the high-frequency vibration can be adopted in micro-blanking in order to improve quality of the microparts.

  4. Failure Analysis of a Sheet Metal Blanking Process Based on Damage Coupling Model

    Science.gov (United States)

    Wen, Y.; Chen, Z. H.; Zang, Y.

    2013-11-01

    In this paper, a blanking process of sheet metal is studied by the methods of numerical simulation and experimental observation. The effects of varying technological parameters related to the quality of products are investigated. An elastoplastic constitutive equation accounting for isotropic ductile damage is implemented into the finite element code ABAQUS with a user-defined material subroutine UMAT. The simulations of the damage evolution and ductile fracture in a sheet metal blanking process have been carried out by the FEM. In order to guarantee computation accuracy and avoid numerical divergence during large plastic deformation, a specified remeshing technique is successively applied when severe element distortion occurs. In the simulation, the evolutions of damage at different stage of the blanking process have been evaluated and the distributions of damage obtained from simulation are in proper agreement with the experimental results.

  5. Tool life equation for blanking 18-8 stainless steel strips

    International Nuclear Information System (INIS)

    Faura, F.; Lopez, J.; Sanes, J.; Garcia, A.

    1998-01-01

    Hereinafter it is presented a model for the behaviour and life of circular blanking tool used in sheet forming processes of 18-8 stainless steel (sheet thickness: 1 mm). Frostily it has analyzed the different studies that have previously dealt with this problem. Secondly taking into account recently made experiments, it is proposed a simple formulation to predict tool life with enough reliability. to this purpose it has examined different parameters in the wear process, inferring from these the fundamental parameters that regulate them and about which the different equations have been configurated. Blanking tests were performed using a 20 t press at a speed of 150 strokes/min. Punch materials used in these test were AISI A2 and AISI D2 with diameters between 1.5 and 10 mm. The blanking tests were performed at a clearance between 5 and 20% of the work material thickness. (Author) 8 refs

  6. The patient's safety - For a dynamics of improvement. Nr 2. The 'blank' first session

    International Nuclear Information System (INIS)

    2011-11-01

    This publication addresses the stakes associated with the first radiotherapy session which is commonly called the 'blank' session. After some figures concerning radiotherapy patients and event declarations, it analyses 13 of these events in terms of number of sessions, location, treatment technique, and error detection (when, by whom). It evokes the consequences of events, and identifies the main causes of these events (positioning controls, work organisation, technical tools and devices). It outlines some good practices: a systematic 'blank' first session before any radiotherapy, a rigorous control of positioning, avoidance of patient repositioning errors. Some innovative techniques of imagery-guided radiotherapy are evoked. Members of radiotherapy departments outline the importance of this first 'blank' session, their own role, and successful practices

  7. High speed phototimer and biplane II blanking method in 105 mm RSC photographing of circulatory system

    International Nuclear Information System (INIS)

    Kaga, Yuji; Kiuchi, Shigeo; Sato, Masami; Komatsuda, Yasushi; Nishio, Kosaku.

    1979-01-01

    A high speed phototimer as an autoexposure mechanism was developed for 105 mm II indirect continuous photographing of circulatory system. The phototimer can give repeated response of 12 times/sec and the shortest X-ray shut out of 1 m sec. The proper lighting field for the phototimer is 7 mm diameter (12%) of the II input area, equivalent to 80 mm in diameter), and the tube voltage, object property and the focus-II distance characteristics are all well corrected to give good photographs of optimal density. The mutual fog in biplane photographing can be removed by adopting II blanking method. As blanking can respond quite rapidly, photographing time plus 2 m sec is enough for blanking time. That means the positive phase can be brought close to 3 m sec. This mechanism can be applied for biplane cine-photographing. (Kobatake, H.)

  8. Thermo-mechanical simulation and parameters optimization for beam blank continuous casting

    International Nuclear Information System (INIS)

    Chen, W.; Zhang, Y.Z.; Zhang, C.J.; Zhu, L.G.; Lu, W.G.; Wang, B.X.; Ma, J.H.

    2009-01-01

    The objective of this work is to optimize the process parameters of beam blank continuous casting in order to ensure high quality and productivity. A transient thermo-mechanical finite element model is developed to compute the temperature and stress profile in beam blank continuous casting. By comparing the calculated data with the metallurgical constraints, the key factors causing defects of beam blank can be found out. Then based on the subproblem approximation method, an optimization program is developed to search out the optimum cooling parameters. Those optimum parameters can make it possible to run the caster at its maximum productivity, minimum cost and to reduce the defects. Now, online verifying of this optimization project has been put in practice, which can prove that it is very useful to control the actual production

  9. Experimental verification of a deep drawing tool system for adaptive blank holder pressure distribution

    DEFF Research Database (Denmark)

    Tommerup, Søren; Endelt, Benny Ørtoft

    2012-01-01

    In deep drawing, the strain path in the blank during the forming process can be significantly affected by application of temporal and spatial variation of the blank holder force. In this study, an active tool system capable of controlling the distribution of the blank holder force is presented...... which can be integrated into existing stacked deep drawing tools without need for modification of the press. A working system is presented consisting of a controller, designated volume displacement cavity pressure supply units and a shimming plate. It is applied to the deep drawing of a rectangular...... to the conventional shimming method using paper or metal shims between the tool plates. The tool system’s ability to influence the material flow is investigated by performing a series of deep drawing experiments. Eight different cavity pressure schemes are applied during the punch stroke and the scheme’s effects...

  10. Deep Drawing of High-Strength Tailored Blanks by Using Tailored Tools

    Directory of Open Access Journals (Sweden)

    Thomas Mennecart

    2016-01-01

    Full Text Available In most forming processes based on tailored blanks, the tool material remains the same as that of sheet metal blanks without tailored properties. A novel concept of lightweight construction for deep drawing tools is presented in this work to improve the forming behavior of tailored blanks. The investigations presented here deal with the forming of tailored blanks of dissimilar strengths using tailored dies made of two different materials. In the area of the steel blank with higher strength, typical tool steel is used. In the area of the low-strength steel, a hybrid tool made out of a polymer and a fiber-reinforced surface replaces the steel half. Cylindrical cups of DP600/HX300LAD are formed and analyzed regarding their formability. The use of two different halves of tool materials shows improved blank thickness distribution, weld-line movement and pressure distribution compared to the use of two steel halves. An improvement in strain distribution is also observed by the inclusion of springs in the polymer side of tools, which is implemented to control the material flow in the die. Furthermore, a reduction in tool weight of approximately 75% can be achieved by using this technique. An accurate finite element modeling strategy is developed to analyze the problem numerically and is verified experimentally for the cylindrical cup. This strategy is then applied to investigate the thickness distribution and weld-line movement for a complex geometry, and its transferability is validated. The inclusion of springs in the hybrid tool leads to better material flow, which results in reduction of weld-line movement by around 60%, leading to more uniform thickness distribution.

  11. Lithographic qualification of high-transmission mask blank for 10nm node and beyond

    Science.gov (United States)

    Xu, Yongan; Faure, Tom; Viswanathan, Ramya; Lobb, Granger; Wistrom, Richard; Burns, Sean; Hu, Lin; Graur, Ioana; Bleiman, Ben; Fischer, Dan; Mignot, Yann; Sakamoto, Yoshifumi; Toda, Yusuke; Bolton, John; Bailey, Todd; Felix, Nelson; Arnold, John; Colburn, Matthew

    2016-04-01

    In this paper, we discuss the lithographic qualification of high transmission (High T) mask for Via and contact hole applications in 10nm node and beyond. First, the simulated MEEF and depth of focus (DoF) data are compared between the 6% and High T attnPSM masks with the transmission of High T mask blank varying from 12% to 20%. The 12% High T blank shows significantly better MEEF and larger DoF than those of 6% attnPSM mask blank, which are consistent with our wafer data. However, the simulations show no obvious advantage in MEEF and DoF when the blank transmittance is larger than 12%. From our wafer data, it has been seen that the common process window from High T mask is 40nm bigger than that from the 6% attnPSM mask. In the elongated bar structure with smaller aspect ratio, 1.26, the 12% High T mask shows significantly less develop CD pull back in the major direction. Compared to the High T mask, the optimized new illumination condition for 6% attnPSM shows limited improvement in MEEF and the DoF through pitch. In addition, by using the High T mask blank, we have also investigated the SRAF printing, side lobe printing and the resist profile through cross sections, and no patterning risk has been found for manufacturing. As part of this work new 12% High T mask blank materials and processes were developed, and a brief overview of key mask technology development results have been shared. Overall, it is concluded that the High T mask, 12% transmission, provides the most robust and extendable lithographic solution for 10nm node and beyond.

  12. Increasing the Deep Drawability of Al-1050 Aluminum Sheet using Multi-Point Blank Holder

    Directory of Open Access Journals (Sweden)

    Gavas, M.

    2006-01-01

    Full Text Available Aluminum alloys have been widely used in the fields of automobile and aerospace industries. Due to their bad cold-formability in deep drawing, a lot of forming methods have been implemented to increase the drawing height and the limiting drawing rate (LDR. The conventional deep drawing process is limited to a certain limit drawing ratio beyond which failure will ensue. The purpose of this experimental study is to examine the possibilities of increasing this limitation using the multi-point blank holder. The results from the experiments showed that the multi-point blank holder is effective way to promote deep drawability of Al-1050 sheet.

  13. Mercury Deposition Network Site Operator Training for the System Blank and Blind Audit Programs

    Science.gov (United States)

    Wetherbee, Gregory A.; Lehmann, Christopher M.B.

    2008-01-01

    The U.S. Geological Survey operates the external quality assurance project for the National Atmospheric Deposition Program/Mercury Deposition Network. The project includes the system blank and blind audit programs for assessment of total mercury concentration data quality for wet-deposition samples. This presentation was prepared to train new site operators and to refresh experienced site operators to successfully process and submit system blank and blind audit samples for chemical analysis. Analytical results are used to estimate chemical stability and contamination levels of National Atmospheric Deposition Program/Mercury Deposition Network samples and to evaluate laboratory variability and bias.

  14. n Vergelykende ondersoek na die werksmotivering van blanke en swart vakmanne in 'n chemiese bedryf

    Directory of Open Access Journals (Sweden)

    A. L. Barnard

    1991-06-01

    Opsomming Die doel met hierdie ondersoek was om met behulp van Lawler en Porter se verwagtingsmodel, vas te stel in watter mate blanke en swart vakmanne, in 'n chemiese nywerheid, hul werksomgewing as toereikend motiverend van aard beskou. Die resultate dui aan dat daar vir beide groepe nie sprake is van 'n optimaal motiverende werksomgewing nie. Terwyl blanke vakmanne ekstrinsieke faktore meer beklemtoon het, het swart vakmanne beter gebalanseerde voorkeure met betrekking tot ekstrinsieke/intrinsieke faktore getoon. Die motiveringspatrone van die twee groepe het egter nie wesenlik van mekaar verskil nie.

  15. High Speed Blanking: An Experimental Method to Measure Induced Cutting Forces

    OpenAIRE

    GAUDILLIERE , Camille; Ranc , Nicolas; LARUE , Arnaud; MAILLARD , A; Lorong , Philippe

    2013-01-01

    Lien vers la version éditeur: http://link.springer.com/article/10.1007/s11340-013-9738-1; International audience; A new blanking process that involves punch speed up to 10 ms −1 has obvious advantages in increased productivity. However, the inherent dynamics of such a process makes it difficult to develop a practical high speed punch press. The fracture phenomenon governing the blanking process has to be well understood to correctly design the machine support and the tooling. To observe this ...

  16. Blank evaluation in nitrogen determination in seed grains by 14 MeV neutron activation analysis

    International Nuclear Information System (INIS)

    Wasek, M.; Sterlinski, S.

    1987-01-01

    In this work the term 'blank' signifies total radiation of the sample analyzed except that the element to be determined (analyte) is absent. On the basis of the evaluation of the blank components (nuclear and spectral interferences, air-nitrogen between grains, etc.), a semiempirical formula for calculating the nitrogen content in plant grain samples is proposed. The reliability of the results obtained with the use of this formula was demonstrated for five sorts of seeds (rye, wheat, barley, broad bean and soybean) which were analyzed by the Kjeldahl method and 14 MeV neutron activation analysis, respectively. (author)

  17. Browse Title Index

    African Journals Online (AJOL)

    Items 251 - 300 of 808 ... ... feed access time and re - alimentation on performance of growing ... Fermentation Characteristics of Guinea Grass - Cassava Leaves Silage, Abstract ... Vol 59, No 1 (2011), Effects on performance of growing pigs fed ...

  18. Browse Title Index

    African Journals Online (AJOL)

    2010), Quality assessment of some brands of vitamin C (ascorbic acid) tablets ... Johnson O Onah, Paul D Datukus. Vol 13, No 1 (2016), Studies on phenolic content and proximate analysis of the leaves of Cadaba farinosa ...

  19. Browse Title Index

    African Journals Online (AJOL)

    Issue, Title. Vol 25, No 2 (2005), Yam-based farm practices and nematode problems in stored yams (Dioscorea spp.) in Ghana, Abstract PDF. CK Kwoseh, RA Plowright, J Bridge, R Asiedu. Vol 27, No 2 (2007), Yield, irrigation production efficiency and economic returns of broccoli under variable drip irrigation and lateral ...

  20. Browse Title Index

    African Journals Online (AJOL)

    Items 51 - 68 of 68 ... Issue, Title. Vol 12, No 1-2 (2009), Sécurité et ordre politique au Cameroun : entre dynamiques internes et connexions internationales, Abstract PDF. BEP Chantal. Vol 6, No 1-2 (2003), Self-Determination, Nationalism, Development and Pan-Africanism Stuck on the Runway: Are Intellectuals to be Blamed ...

  1. Browse Title Index

    African Journals Online (AJOL)

    Items 551 - 600 of 1463 ... Issue, Title. Vol 15, No 2 (2015), Evaluation of the diagnostic performance and operational characteristics of four rapid immunochromatographic syphilis tests in Burkina Faso, Abstract PDF. FY Bocoum, H Ouedraogo, G Tarnagda, A Kiba, S Tiendrebeogo, F Bationo, B Liestman, S Diagbouga, ...

  2. Browse Title Index

    African Journals Online (AJOL)

    Items 351 - 400 of 400 ... Issue, Title. Vol 9, No 1 (2010), Soft tissue sarcoma of the thigh: Need for angiography in the developing, Abstract PDF. IA Adigun, GA Rahman, KO Ogundipe. Vol 3, No 1 (2004), Spectrum of rheumatic heart disease in Zaria, Northern Nigeria, Abstract. SS Danbauchi, MA Alhassan, SO David, ...

  3. Browse Title Index

    African Journals Online (AJOL)

    Items 1 - 50 of 183 ... Issue, Title. Vol 62 (2017), #SchoolsOnFire: Criminal justice responses to protests that impede the right to basic education, Abstract PDF. Ann Skelton, Martin Nsibirwa. Vol 45 (2013), 'Pale Face'/'Pointy Face: SA Criminology in Denial, Abstract PDF. S Henkeman. Vol 59 (2017), Aluta continua: Police ...

  4. Browse Title Index

    African Journals Online (AJOL)

    Items 1 - 14 of 14 ... Issue, Title. Vol 2, No 1 (2009), Auditory and Respiratory Health Disorders Among Workers in an Iron and Steel Factory, Abstract. GM Abdel – Rasoul, OAE Mahrous, ME Abou Salem, MA Al-Batanony, HK Allam. Vol 2, No 1 (2009), Effect of An Educational Program About Medical Waste Management on ...

  5. Browse Title Index

    African Journals Online (AJOL)

    Items 51 - 100 of 391 ... Journal Home > Advanced Search > Browse Title Index ... Efficacy of four Rodenticides on the Ghanaian Market, Abstract ... Vol 2, No 1 (2000):, Determination of some wear elements in used car engine oil and oil filter ...

  6. Browse Title Index

    African Journals Online (AJOL)

    Items 251 - 300 of 490 ... Issue, Title. Vol 6, No 2 (2010), Knowledge and patterns of use of highly active antiretroviral therapies in HIV management at Abuja, Nigeria, Abstract. Jill I Okpalugo, US Inyang, K Ibrahim, F Anita, Chinwe V Ukwe, NC Aguwa. Vol 5, No 4 (2009), Knowledge and utilization of the acts in two major ...

  7. Browse Title Index

    African Journals Online (AJOL)

    Items 9951 - 10000 of 11090 ... Issue, Title. Vol 10, No 36 (2011), Study of heavy metals bioaccumulation in the process of vermicomposting, Abstract PDF. MM Aleagha, G Ebadi. Vol 10, No 45 (2011), Study of malondialdehyde (MDA) content, superoxide dismutase (SOD) and glutathione peroxidase (GSH-Px) activities in ...

  8. Browse Title Index

    African Journals Online (AJOL)

    Items 1 - 50 of 412 ... Issue, Title. Vol 32, No 2 (2013), Seinsverständnis and meaning in Heidegger, Abstract. Rafael Winkler. Vol 21, No 3 (2002), A defense of peace as a human right, Abstract. Patrick Hayden. Vol 26, No 2 (2007), A Kantian stance on teleology in biology, Abstract. AA Cohen. Vol 30, No 1 (2011), A Likely ...

  9. Browse Title Index

    African Journals Online (AJOL)

    Items 251 - 300 of 328 ... Issue, Title. Vol 7, No 1 (2003), Sexual Harassment in Academia in Nigeria: How Real? Details PDF. Olugbenga Jelil Ladebo. Vol 8, No 2 (2004), Shaping the internet for match-making/dating: a challenge for the contemporary Nigerian family institution, Abstract PDF. Wale Adesina. Vol 6, No 1 (2002) ...

  10. Browse Title Index

    African Journals Online (AJOL)

    Items 51 - 73 of 73 ... Journal Home > Advanced Search > Browse Title Index ... Vol 13 (2006), The ageing eye” functional changes from cradle to gray: A ... Vol 12 (2005), The evaluation of vision in children using monocular vision acuity and ...

  11. Browse Title Index

    African Journals Online (AJOL)

    Issue, Title. Vol 22, No 2 (2008), Voltammetric determination of heparin based on its interaction with malachite green, Abstract PDF. Xueliang Niu, Weili Zhang, Na Zhao, Wei Sun. Vol 22, No 2 (2008), Voltammetric determination of l-cysteic acid on a 1-[4-(ferrocenyl-ethynyl)phenyl]-1-ethanone modified carbon paste ...

  12. Browse Title Index

    African Journals Online (AJOL)

    Items 201 - 250 of 577 ... Issue, Title. Vol 20, No 2 (2003), Emergency Contraception: A Global Overview of Knowledge, Attitudes and Practices Among Providers, Abstract PDF. Deborah Haggai. Vol 23 (2006):, Emergency laparotomy for peripartum haemorrhage in Bida North Central Nigeria, Abstract PDF. Sunny Abiodun O ...

  13. Browse Title Index

    African Journals Online (AJOL)

    Items 201 - 250 of 11090 ... Issue, Title. Vol 12, No 49 (2013), In vitro regeneration of selected Kenyan papaya (Carica papaya L.) lines through shoot tip culture, Abstract PDF. Naomi Nzilani Mumo, Fredah Karambu Rimberia, George Edward Mamati, Agnes Wanjiru Kihurani. Vol 7, No 12 (2008), In vitro regeneration of Turkish ...

  14. Browse Title Index

    African Journals Online (AJOL)

    Items 151 - 200 of 221 ... Issue, Title ... Vol 38 (2010), Soft drink consumption of Grade 4 and Grade 7 learners in the Wynberg area, City of Cape Town, South .... Vol 42 (2014), The meaning of food for obese men: a qualitative study, Abstract PDF.

  15. Browse Title Index

    African Journals Online (AJOL)

    Items 101 - 150 of 1215 ... Journal Home > Advanced Search > Browse Title Index. Log in or ... Vol 12, No 1 (2018), Analysis of the effects of frequent strikes on academic performance of students in universities in Nigeria: Edo State as a focal point, Abstract PDF ... Vol 6, No 1 (2012), Appraisal as a Determinant for Adequate ...

  16. Browse Title Index

    African Journals Online (AJOL)

    Items 1 - 20 of 20 ... Issue, Title. Vol 9, No 2 (2000), Age dependent changes in the hypothalamic amino acid neurotransmitters in response to nicotine, Abstract. NM Radwan, NA Ahmed, YAM Aly. Vol 9, No 2 (2000), Autoantibodies, ocular and auditory changes in patients with vitiligo, Abstract. AE Fathia, EA Nagwa, ...

  17. Browse Title Index

    African Journals Online (AJOL)

    Items 51 - 76 of 76 ... Issue, Title. Vol 6, No 1 (2013), Integrating Sustainability into the Real Estate Valuation Process: A Nigerian Perspective, Abstract PDF. G K Babawale, B A Oyalowo. Vol 5, No 1 (2012), Internalising internationa valuation standards: Relevance and applicability issues in the Nigerian context, Abstract PDF.

  18. Browse Title Index

    African Journals Online (AJOL)

    Items 51 - 100 of 201 ... Issue, Title. Vol 12, No 1 (2006), Conservative management of cervical ectopic pregnancy: case report, Abstract PDF. TD Naidoo, MR Ramogale, J Moodley. Vol 18, No 2 (2012), Contraceptive use and associated factors among South African youth (18 - 24 years): A population-based survey, Abstract ...

  19. Browse Title Index

    African Journals Online (AJOL)

    Items 151 - 183 of 183 ... Issue, Title. Vol 9, No 1 (2004), Socio-economic constraints affecting youths involvement in national economic development, Abstract. Josephine U Nwagwu. Vol 12, No 2 (2007), Stabilizing Potential Of Cement-Fly Ash Mixture On Expansive Clay Soil, Abstract. OO Amu, AB Fajobi, SO Afekhuai. Vol 11 ...

  20. Browse Title Index

    African Journals Online (AJOL)

    Items 1 - 50 of 76 ... Issue, Title. Vol 16, No 2 (2006), A profile of the theatre procedures in paediatrict ophthalmic practice, Abstract. E O Onwasigwe. Vol 15, No 2 (2005), Abdominal cocoon, Abstract. Abdulrasheed K Adesunkanmi, Tajudeen A Badmus, Olukayode Ogundoyin, Akinwumi B Ogunrombi. Vol 18, No 1 (2008) ...

  1. Browse Title Index

    African Journals Online (AJOL)

    Items 1 - 50 of 647 ... Issue, Title. Vol 13, No 2 (2010), 'N toekomstige perspektief op grondwetlike stabiliteit, Abstract PDF. F.W de Klerk. Vol 18, No 5 (2015), Cloete murray and Another v Firstrand bank ltd t/a Wesbank [2015] ZASCA 39A, Abstract PDF. M Laubscher. Vol 15, No 5 (2012), Cave Pecuniam: Lawyers as ...

  2. Browse Title Index

    African Journals Online (AJOL)

    Items 1 - 15 of 15 ... Issue, Title. Vol 1, No 1 (2008), Assessment Of Ophthalmic Patients' Satisfaction In Owo, Abstract. CO Omolase, CO Fadamiro, BO Omolase, AS Aina, EO Omolade. Vol 3, No 1 (2010), Case Report: Strongyloides stercoralis coinfection in a Nigerian with HIV. Abstract. A.A Oyekunle, R.A.A Bolarinwa, O.A ...

  3. Browse Title Index

    African Journals Online (AJOL)

    Items 1 - 15 of 15 ... Issue, Title. Vol 1, No 1 (2007), An Action Five Strategy For Bridging The Gender Gap In Academic Research Activities In African Universities. The Case of Nigeria, Abstract PDF. DN Okorie, OG Agabi, CM Uche. Vol 1, No 1 (2007), Book Review: Confronting sexual harassment in Ghanaian Universities ...

  4. Browse Title Index

    African Journals Online (AJOL)

    Items 1 - 50 of 93 ... Issue, Title. Vol 5 (2013), A cost-effective Geographic Information Systems for Transportation (GIS-T) application for traffic congestion analyses in the Developing World, Abstract PDF. E Agyemang. Vol 3 (2011), A Historical and Gendered Perspective on HIV / AIDS in Botswana, Abstract PDF. J Hesselberg ...

  5. Browse Title Index

    African Journals Online (AJOL)

    Items 201 - 250 of 327 ... Issue, Title. Vol 10, No 4 (2016), Omphalocoeles: A decade in review, Abstract PDF. S Singh, A Madaree. Vol 2, No 4 (2008), Ortner syndrome, Abstract PDF. E Meyer, NE Jones, LJ Zühlke. Vol 10, No 3 (2016), Outcome of children admitted to a general highcare unit in a regional hospital in the ...

  6. Browse Title Index

    African Journals Online (AJOL)

    Items 1 - 50 of 814 ... Issue, Title. Vol 21, No 2 (2016), A 10 years trend of peptic ulcer disease and other gastrointestinal disorders in northern Uganda, Abstract PDF. T.R. Okello, D.M. Ogwang, I Pecorella. Vol 21, No 2 (2016), A 2-years description of traumatic brain injury admissions in Tikur Anbessa Specialized Hospital ...

  7. Browse Title Index

    African Journals Online (AJOL)

    Items 301 - 350 of 577 ... Issue, Title. Vol 32, No 2 (2015), Late arrival in hospital during labour: any correlation with materno-foetal outcome? The state specialist hospital, Asubiaro, Osogbo Experience. Abstract PDF. OO Awolola. Vol 30, No 2 (2013), Late Reproductive Effects of Cancer Treatment in Young People, Abstract ...

  8. Browse Title Index

    African Journals Online (AJOL)

    Items 1 - 50 of 319 ... Issue, Title. Vol 23, No 2 (2016), Carica papaya juice enhanced in-vitro cell proliferation better than freeze-dried PBS extract using scratch assay, Abstract. A.B. Nafiu, E Abdulaziz, M.T. Rahman. Vol 23, No 2 (2016), A comparative study of the ownership and utilization of insecticide treated nets in ...

  9. Browse Title Index

    African Journals Online (AJOL)

    Items 1 - 50 of 52 ... Issue, Title. Vol 15 (2000), Ammi analysis of maize yield trials in South-Western Nigeria, Abstract. SR Ajibade, BA Ogunbodede. Vol 20 (2006), Association of yield with some agronomic characters in potatoes in a cool mid-altitude location, Abstract. CO Amadi, EE Ene Obong. Vol 20 (2006), Casein (CSN3) ...

  10. Browse Title Index

    African Journals Online (AJOL)

    Items 201 - 240 of 240 ... Issue, Title. Vol 8, No 4 (2005), Status equipment in primary health centres of Tafa Lga, North Central Nigeria, Abstract. MN Sambo, I Lewis, K Sabitu. Vol 10, No 1 (2007), Stroke at a tertiary medical institution in Northern Nigeria: Patients\\' profile and predictors of outcome, Abstract. KW Wahab, MU ...

  11. Browse Title Index

    African Journals Online (AJOL)

    Items 1 - 50 of 249 ... Issue, Title. Vol 10, No 1 (2010), Ye Shakoch Chilot (the court of the sheikhs): A traditional institution of conflict resolution in Oromiya zone of Amhara regional state, Ethiopia, Abstract PDF. M Zeleke. Vol 15, No 3 (2015), A comparative analysis of the Post- Arab Spring National Dialogues in Tunisia and ...

  12. Browse Title Index

    African Journals Online (AJOL)

    Items 101 - 150 of 670 ... Issue, Title. Vol 9, No 2 (2012), Business Planning and the Economic Growth of Small and Medium Scale Enterprises in Nigeria, Abstract. Egbe Aneozeng A, Ejoh Ndifon Ojong, Obo Ekpenyong Bassey. Vol 11, No 2 (2014), Calabar Humaphors: An Analysis of Selected Jokes in Nigerian Stand Up ...

  13. Browse Title Index

    African Journals Online (AJOL)

    Items 101 - 107 of 107 ... Issue, Title. Vol 6, No 1 (2017), The Ophthalmic status manifestations of nutritional and lifestyle disorders of men in a peri urban community in Ghana, Abstract PDF. F. Vuvor, M. Steiner-Asiedu, F.K. Saalia. Vol 2, No 1 (2013), Thyroid Disorders in Accra, Ghana: A Retrospective Histopathological Study ...

  14. Browse Title Index

    African Journals Online (AJOL)

    Items 51 - 100 of 165 ... Issue, Title. Vol 30 (2005), Digitisation projects at the University of Cape Town Libraries, Abstract. Janine Dunlop, Lesley Hart. Vol 24 (2002), DISA: an African Perspective on Digital Technology, Abstract. Michele Pickover, Dale Peters. Vol 30 (2005), Doing it right – or are we? Basic principles in the ...

  15. Browse Title Index

    African Journals Online (AJOL)

    Items 1 - 50 of 251 ... Issue, Title. Vol 55 (2014), 20 Years of democracy: Transforming the public service, Abstract. A Ruiters. Vol 63 (2016), Zemk' iinkomo magwala ndini! Wake up! The cows are being stolen! Abstract. Sipho Pityana. Vol 56 (2014), A layperson's guide to Nene's budget statement, Abstract. B Turok.

  16. Browse Title Index

    African Journals Online (AJOL)

    Items 1 - 50 of 1007 ... Issue, Title. Vol 11, No 1 (1997), (+)-Floribundone 3 from the pods of Senna septemtrionalis, Details PDF. Gizachew Alemayehu, Bekuretsion Woldeyesus, Berhanu M Abegaz. Vol 14, No 1 (2000), 11α-Hydroxy muzigadiolide, a novel drimane sesquiterpene from the stem bark of warburgia ugandensis ...

  17. Browse Title Index

    African Journals Online (AJOL)

    Items 1 - 50 of 356 ... Issue, Title. Vol 27, No 3 (2014), A desire for weight loss in season increases disordered eating behaviour risk and energy deficiency in athletes, Abstract PDF. HH Wright, R Ford, CR Botha. Vol 29, No 3 (2016), A review of infant and young child feeding practice in hospital and the home in KwaZulu-Natal ...

  18. Browse Title Index

    African Journals Online (AJOL)

    Items 1 - 50 of 66 ... Issue, Title. Vol 48, No 1-2 (2015), A hierarchical modeling of information seeking behavior of school teachers in rural areas of Nigeria, Abstract. Manir Abdullahi Kamba. Vol 49, No 1-2 (2016), Access to electronic information resources by students of federal college of education in south east Nigeria ...

  19. Browse Title Index

    African Journals Online (AJOL)

    Items 101 - 150 of 683 ... Issue, Title. Vol 54, No 1 (2006), Bovine tuberculosis survey in urban and peri urban dairy farms in coastal humid region of Tanga, Tanzania, Abstract. ES Swai, G Shirima, S Bwanga, W Moshy. Vol 60, No 3 (2012), Browsing capacity and nutritive value of indigenous browses in a tropical Coastal ...

  20. Browse Title Index

    African Journals Online (AJOL)

    Items 151 - 200 of 387 ... Issue, Title. Vol 15, No 2 (2015), Introduction to Christian philosophy, Abstract. Charles Ogundu Nnaji. Vol 8, No 2 (2006), Is Quantum Mechanics a Complete Theory?: A Philosophical Defense of Einstein's Position, Abstract. U O Egbai. Vol 10, No 1 (2007), Jesus in Africa, Abstract. FF Edet. Vol 10, No ...

  1. Browse Title Index

    African Journals Online (AJOL)

    Items 51 - 98 of 98 ... Issue, Title. Vol 4, No 1 (2016), First-year seminar intervention: Enhancing firstyear mathematics performance at the University of Johannesburg, Abstract PDF. Melanie Jacobs, Estherna Pretorius. Vol 5, No 2 (2017), From Inky Pinky Ponky to Improving Student Understanding in Assessment: Exploring the ...

  2. Browse Title Index

    African Journals Online (AJOL)

    Items 151 - 167 of 167 ... Issue, Title ... Vol 2, No 2 (2013), Women and the Leadership Paradigm: Bridging the Workplace Gender-Gap in Nigeria, Abstract PDF ... Vol 5, No 2 (2016), Women's participation and gender issues in local governance ...

  3. Browse Title Index

    African Journals Online (AJOL)

    Items 51 - 100 of 110 ... Issue, Title. Vol 10, No 1 (2003), Incidence and Determinants of Child Labour in Nigeria: Implications for Poverty Alleviation, Abstract. Benjamin Chiedozie Okpukpara, Ngozi Odurukwu. Vol 20, No 1 (2013), Inflation and capacity utilisation in Nigeria's manufacturing sector, Abstract. OA Ishola. Vol 19, No ...

  4. Browse Title Index

    African Journals Online (AJOL)

    Items 251 - 300 of 367 ... Issue, Title. Vol 43 (2014), Some interlingual communicative challenges for foreign African interpreters in South African courtrooms, Abstract PDF. SE Usadolo, E Kotze. Vol 29 (1996), South Africa's new language policy in the context of the organisation for African unity's language plan of action for ...

  5. Browse Title Index

    African Journals Online (AJOL)

    Items 1 - 50 of 89 ... Issue, Title ... of two-phased approaches to load balancing in cloud computing, Abstract ... Vol 19, No 1 (2012), Assessing Network Services and Security in ... Vol 23, No 1 (2016), Cloud model construct for transaction-based ...

  6. Browse Title Index

    African Journals Online (AJOL)

    Items 51 - 100 of 198 ... Issue, Title ... Vol 13, No 1 (2015), Biometric Enhancement of Home and Office Security to Reduce Assassinations in Nigeria, Abstract PDF ... Vol 9, No 1 (2013), Cloud Computing: Key to IT Development in West Africa ...

  7. Browse Title Index

    African Journals Online (AJOL)

    Items 151 - 198 of 198 ... Issue, Title ... scheme for QoS and energy conservation in cloud computing, Abstract PDF ... Vol 9, No 1 (2013), Performance and Security Evaluation of ... Vol 18, No 1 (2017), Reducing capital flight through local cloud ...

  8. Browse Title Index

    African Journals Online (AJOL)

    Items 251 - 300 of 652 ... Journal Home > Advanced Search > Browse Title Index ... Vol 18, No 7 (2015), Introduction to virtual property: Lex virtualis ipsa ... Vol 17, No 1 (2014), Legal challenges relating to the commercial use of outer space, with ...

  9. Browse Title Index

    African Journals Online (AJOL)

    Items 151 - 170 of 170 ... Issue, Title. Vol 20, No 2 (2004), The Impact of Mine Closures on Rural Population Dynamics: The Case of Zhombe in Kwekwe District, Midlands Province, Zimbabwe, Abstract. Crescentia Madebwe. Vol 29, No 1 (2013), The Influence of Organisational Culture and Job Satisfaction on Intentions to ...

  10. Browse Title Index

    African Journals Online (AJOL)

    Items 101 - 150 of 263 ... Issue, Title. Vol 1, No 2 (2002), Effect of Light and Darkness on Packed Cell Volume in the Rat, Abstract. A. A. OSINUBI, F. I. DURU, C. C. NORONHA, A. O. OKANLAWON. Vol 4, No 1 (2005), Effect of Marijuana Smoking on Blood Chemistry and Serum Biogenic Amines Concentrations in Humans ...

  11. Browse Title Index

    African Journals Online (AJOL)

    Items 751 - 800 of 846 ... Journal Home > Advanced Search > Browse Title Index ... Vol 9, No 3S (2017): Special Issue, The effect of torrefaction on oil palm ... core competency skills of IRBM tax auditors towards their performance, Abstract PDF ... of exchange rates behavior in Malaysia by using NATREX model, Abstract PDF.

  12. Browse Title Index

    African Journals Online (AJOL)

    Issue, Title. Vol 38, No 1 (2004), Book Review: Unexpected Voices – Theory, Practice and Identity in the Writing Classroom. Abstract. Charly Dyers. Vol 38, No 1 (2004), Book Review: Shelley Angelil-Carter: Stolen Language? Plagiarism in Writing. Abstract. Elizabeth de Kadt. Vol 37, No 1 (2003), Book Review: The Green ...

  13. Browse Title Index - AJOL

    African Journals Online (AJOL)

    Items 501 - 508 of 508 ... Issue, Title. Vol 33, No 2 (2011), Visuele stereotipering van sportvroue in die sportmedia, Abstract. M Brandt, A Carstens. Vol 30, No 1 (2008), Volunteers\\' perceptions of benefits derived from volunteering: an empirical study, Abstract. J Surujlal, M Dhurup. Vol 33, No 1 (2011), Was the Conconi test ...

  14. Browse Title Index

    African Journals Online (AJOL)

    Items 101 - 108 of 108 ... Issue, Title. Vol 8, No 2 (2016), The status and challenges of clinical informatics development in South Africa, Abstract PDF. Abayomi Kehinde Owolabi, Thokozani Patrick Mhlongo, Neil Evans. Vol 4, No 1 (2012), The stuttering implementation of language policies in the South African education system ...

  15. Browse Title Index

    African Journals Online (AJOL)

    Items 51 - 100 of 100 ... Issue, Title. Vol 28 (2013): Special Issue, Occurrence of Cryptosporidium and Giardia in domestic animals in peri-urban communities of Kafue district, Zambia, Abstract. J Siwila, IGK Phiri, HI Enemark, M Nchito, A Olsen. Vol 26, No 1 (2009), Occurrence of foot and mouth disease serotypes in Tanzania: A ...

  16. Browse Title Index

    African Journals Online (AJOL)

    Items 801 - 850 of 11090 ... Issue, Title. Vol 10, No 61 (2011), Analysis of chemical constituents in medicinal plants of selected districts of Pakhtoonkhwa, Pakistan, Abstract PDF. I Hussain, R Ullah, J Khan, N Khan, M Zahoor, N Ullah, MuR Khattak, FA Khan, A Baseer, M Khurram. Vol 10, No 77 (2011), Analysis of chloroplast ...

  17. Browse Title Index

    African Journals Online (AJOL)

    Items 501 - 550 of 670 ... Issue, Title. Vol 11, No 4 (2014), Strategies for Fostering Creativity Among Business Education Graduates in Nigeria, Abstract. BO Nwosu, KE Ojo. Vol 13, No 1 (2015) ... Vol 10, No 1 (2013), The Challenges Facing Accounting Education: The Nigerian Experience, Abstract. OR Okolie. Vol 5 (2008), The ...

  18. Browse Title Index

    African Journals Online (AJOL)

    Items 101 - 150 of 198 ... Issue, Title ... Vol 7, No 1 (2013), Enterprise Cloud Adoption: Leveraging on the Business ... Load Balancing And Job Scheduling In Cloud Computing ... Vol 13, No 1 (2015), ICT-Based Framework for Improved Food Security in Nigeria ... Vol 5, No 1 (2012), IT-Based Solutions to the Electoral System in ...

  19. Browse Title Index

    African Journals Online (AJOL)

    Items 101 - 150 of 1117 ... Journal Home > Advanced Search > Browse Title Index ... Vol 13, No 3 (2007):, an edu-ethical perspecitve on the nature of truth: case studies in elite ... 2009: September: Supplement, An empirical study of university ...

  20. Browse Title Index

    African Journals Online (AJOL)

    Issue, Title. Vol 20, No 1 (2015), Assessment of iron status among preschool children (6 to 59 months) with and without malaria in Western Province, Kenya, Abstract. I Kisiangani, C Mbakaya, A Makokha, D Magu. Vol 20, No 1 (2015), Assessment of iron status among preschool children (6 to 59 months) with and without ...

  1. Browse Title Index

    African Journals Online (AJOL)

    Items 151 - 200 of 232 ... Issue, Title. Vol 5 (2003), Pre-School Education for a Democratic Society: Identifying Views of Stakeholders in Tanzania, Abstract. Willy LM Komba, Satoki T Mahenge, Gadi Koda. Vol 13, No 2 (2012), Process of Assuring Quality in Counselling at the National Open University of Nigeria: A Critique ...

  2. Browse Title Index

    African Journals Online (AJOL)

    Items 101 - 150 of 1732 ... Journal Home > Advanced Search > Browse Title Index ... Vol 10, No 3 (2007), An Audit Of Perioperative Cardiac Arrest At ... Vol 11, No 4 (2008), An Audit Of Rejected Repeated X-ray Films As A Quality Assurance ...

  3. Browse Title Index

    African Journals Online (AJOL)

    Items 151 - 200 of 1038 ... Issue, Title. Vol 31, No 2 (2009), Assessing the utility of a continuous, underway fish egg sampler (CUFES) for sampling zooplankton, Abstract. S Sono, CL Moloney, CD van der Lingen. Vol 38, No 4 (2016), Assessing trophic adaptability is critical for understanding the response of predatory fishes to ...

  4. Browse Title Index

    African Journals Online (AJOL)

    Items 1 - 50 of 101 ... Issue, Title. Vol 3, No 4 (2014), Chlamydia trachomatis IgG antibodies seroprevalence among students in two tertiary institutions in Anambra state, Nigeria: a comparative study, Abstract PDF. CB Duru, FE Emele, ED Adinma, CO Ifeadike, KA Uwakwe, AO Oluboyo, BO Oluboyo, C Abejegah. Vol 2, No 1 ...

  5. Browse Title Index

    African Journals Online (AJOL)

    Items 201 - 250 of 367 ... Issue, Title. Vol 42 (2013), Nursing the Cure: A Phonetic Analysis of /ʊə/ in South African English, Abstract PDF. I Bekker. Vol 1 (1980), Nuwe ontwikkelings binne chomsky se teorle van kerngrammatika, Abstract PDF. J Maartens. Vol 42 (2013), Obligatory Reflexivity in a Minimalist Grammar of ...

  6. Browse Title Index

    African Journals Online (AJOL)

    Items 651 - 700 of 1007 ... Issue, Title. Vol 4, No 1 (1990), Kinetics of oxidation of β-diimihe macrocyclic complexes and accessibility of six-coordinate copper(III) complexes generated by electrochemical oxidation of copper(II) complexes, Abstract PDF. Mohamed A. Khalifa. Vol 14, No 2 (2000), Kinetics of periodate oxidation of ...

  7. Browse Title Index

    African Journals Online (AJOL)

    Items 151 - 200 of 1020 ... Issue, Title ... Vol 48, No 2 (2006), Barriers to HIV Care and Treatment by Doctors: A review of the literature. ... Vol 48, No 5 (2006), Breast cancer – early detection and screening in South African women from the ...

  8. Browse Title Index

    African Journals Online (AJOL)

    Issue, Title. Vol 23, No 2 (2011), Dynamique foliaire et croissance du maïs: Application du modèle «STICS» en conditions tropicales en RD-Congo, Abstract PDF. MM Lufuluabo, RV Kizungu, KK Nkongolo. Vol 18, No 1 (2006), Dynamique spatio-temporelle des populations d\\'Altises Podagrica spp. (Coleoptera ...

  9. Browse Title Index

    African Journals Online (AJOL)

    Items 251 - 300 of 2005 ... Issue, Title. Vol 92, No 4 (2015), Blood Pressure and Obesity Index Assessment in a Typical Urban Slum in Enugu, Nigeria, Abstract. GI Ahaneku, CU Osuji, OC Oguejiofor, BC Anisiuba, VO Ikeh, JE Ahaneku. Vol 80, No 10 (2003):, Blood pressure control in a population where antihypertensives are ...

  10. Browse Title Index

    African Journals Online (AJOL)

    Items 201 - 250 of 661 ... Journal Home > Advanced Search > Browse Title Index. Log in or Register to get access to full text downloads. .... A El-Mahdy, B Bolduc, J Upadhyay, R Shoukr, A Khoury. Vol 19, No 1 (2013), Factors affecting lower calyceal stone clearance after Extracorporeal shock wave lithotripsy, Abstract PDF.

  11. Browse Title Index

    African Journals Online (AJOL)

    Items 101 - 150 of 985 ... Journal Home > Advanced Search > Browse Title Index ... Vol 17 (2010), Alternating Direction Implicit Finite Difference Time Domain Acoustic Wave Algorithm, Abstract. E Ikata .... Vol 17 (2010), Analytic derivation of the wave profile and phase speed of sixth order Stokes waves in deep water, Abstract.

  12. Browse Title Index

    African Journals Online (AJOL)

    Items 151 - 200 of 286 ... Issue, Title. Vol 2, No 3-4 (2008), Impact of fire wood collection on trees species diversity in Bauchi state, Nigeria, Abstract. A Nura, A Ibrahim, I Mohammed, U Haruna. Vol 5, No 3 (2011), Impact of national special program for food security in Abia State, nigeria, Abstract. CO Emerole. Vol 5, No 1 (2011) ...

  13. Browse Title Index

    African Journals Online (AJOL)

    Items 351 - 400 of 979 ... Issue, Title. Vol 45, No 9 (2003), Erectile dysfunction: A GP's guide to clinical assessment, Abstract PDF. PJ Harden. Vol 47, No 4 (2005), Ethical Issues in Family Practice: My Culture – Right or Wrong? Abstract PDF. GA Ogunbanjo, D Knapp van Bogaert. Vol 59, No 3 (2017), Ethical issues with ...

  14. Browse Title Index

    African Journals Online (AJOL)

    Items 301 - 350 of 745 ... Issue, Title. Vol 9, No 3 (1999), Frequency And Outcome In AIDS Patients In A University Teaching Hospital – A Five Year Review, Abstract. SA Ogun, OO Adelowo, AEA ... Vol 18, No 2 (2008), Good cllinical practice in clinical drug trials - What you need to know, Abstract. K Soyebi, Y Abosede, HAB ...

  15. Browse Title Index

    African Journals Online (AJOL)

    Items 1 - 50 of 217 ... Browse Title Index. Journal Home > Advanced ... Vol 13, No 1 (2016), Access to specialized surgical care, Abstract PDF. H Saidi ... Vol 9, No 2 (2012), Clinical Assessment of the Palmaris Longus – Accuracy of common tests, Abstract PDF ... Vol 11, No 2 (2014), Clinical trials in Surgery, Abstract PDF.

  16. Browse Title Index

    African Journals Online (AJOL)

    Items 151 - 200 of 633 ... Issue, Title. Vol 19, No 1 (2009), Delays in Tuberculosis Treatment and Associated Factors in Jimma Zone, Southwest Ethiopia, Abstract PDF. Ayalew Tegegn, Meseret Yazachew. Vol 26, No 1 (2016), Delivery Site Preferences and Associated Factors among Married Women of Child Bearing Age in ...

  17. Browse Title Index

    African Journals Online (AJOL)

    Items 151 - 200 of 4119 ... Issue, Title. Vol 86, No 2 (1996), A re-evaluation of isotope screening for skeletal metastases in nodenegative breast cancer, Abstract PDF. C.A. Gudgeon, I.D. Werner, D.M. Dent. Vol 104, No 6 (2014), A reflection on the South African Medical Association – past, present and future, Abstract PDF.

  18. Browse Title Index

    African Journals Online (AJOL)

    Items 201 - 250 of 1006 ... Issue, Title. Vol 49, No 8 (2007), Clinical approach to a patient with abnormal uterine bleeding, Abstract PDF. B G Lindeque. Vol 57, No 5 (2015), Clinical evidence in the management of swimmer's ear, Abstract PDF. Andre Marais. Vol 50, No 1 (2008), Clinical features of Systemic Lupus ...

  19. Browse Title Index

    African Journals Online (AJOL)

    Items 701 - 750 of 1010 ... Issue, Title. Vol 6, No 2 (1998), Performance et stabilité de rendement des génotypes de patate douce dans divers environnements à l'est du Congo, Abstract. P Phemba, T Mutombo, N B Lutaladio, E E Carey. Vol 22 (2014): Supplement, Performance of Artemia shell-free embryos, Moina micrura and ...

  20. Browse Title Index

    African Journals Online (AJOL)

    Issue, Title. Vol 17 (2005), A. C. conduction behaviour in amorphous WO3/CEO2 thin film, Abstract. B Yagoubi, C A Hogarth, A Boukorrt. Vol 16 (2003), A lossless image compression algorithm using variable block size segmentation, Abstract. Z Brahimi, K A Saadi, N Baraka. Vol 15 (2003), Analysis method of wavelet ...

  1. Browse Title Index

    African Journals Online (AJOL)

    Items 51 - 97 of 97 ... Journal Home > Advanced Search > Browse Title Index ... Vol 20, No 2 (2008), Research Note: Anthropometric data of the foot of ... Vol 26, No 1 (2014), Validation of the Automation Attitude Questionnaire for Airline Pilots ...

  2. Titles of Midas

    Directory of Open Access Journals (Sweden)

    G. L. Huxley

    2001-09-01

    Full Text Available The Phrygian inscription on the tomb at Yazılıkaya (8th century gives Midas the titles wanax and lawagtas, paralled in Mycenaean, and there were strong connections between his dynasty and Greek Aeolis.

  3. Browse Title Index

    African Journals Online (AJOL)

    Items 201 - 250 of 333 ... Issue, Title. Vol 15, No 1 (2016), Irrigation potential of Inuakpa in Odukpani local government of Cross river using Kostiakov model, Abstract PDF. B.O. Unuigbe, K.I. Ofem, N.R.B. Antigha. Vol 2, No 2 (2003), LABOUR USE IN SMALL-SCALE YAM PRODUCTION IN QUA'AN PAN LOCAL GOVERNMENT ...

  4. Browse Title Index

    African Journals Online (AJOL)

    Items 51 - 100 of 644 ... Issue, Title. Vol 19, No 2 (2007), A qualitative study of medical student socialization in Malawi\\'s College of Medicine: Clincal crisis and beyond, Abstract PDF. C Wendland, C Bandawe. Vol 19, No 2 (2007), A qualitative study of medical student socialization in Malawi\\'s College of Medicine: Preclinical ...

  5. Browse Title Index

    African Journals Online (AJOL)

    Issue, Title. Vol 13, No 2 (2013), Using Mindfulness as a Teaching Aid for Phenomenology, Abstract PDF. IR Owen. Vol 8, No 1 (2008), Were Nietzsche's Cardinal Ideas – Delusions? Abstract PDF. Eva M Cybulska. Vol 12, No 1 (2012), What did you learn in school today? Abstract PDF. Carina Henriksson. Vol 5, No 1 (2005) ...

  6. Browse Title Index

    African Journals Online (AJOL)

    Items 51 - 100 of 265 ... Issue, Title. Vol 35, No 2 (2008), Choice of place for childbirth: prevalence and correlates of utilization of health facilities in Chongwe district, Zambia, Abstract PDF. AN Hazemba, S Siziya. Vol 43, No 1 (2016), Clinical and Radiological Features of Multiple Myeloma Patients at the University Teaching ...

  7. Browse Title Index

    African Journals Online (AJOL)

    Issue, Title. Vol 88, No 8 (1998), New birth and death registration forms - a foundation for the future, a challenge for health workers? Abstract PDF. Debbie Bradshaw, Danuta Kielkowski, Freddy Sitas. Vol 83, No 3 (1993), New estimates of infant and child mortality for blacks in South Africa, 1968-1979, Abstract PDF.

  8. Browse Title Index

    African Journals Online (AJOL)

    Items 151 - 200 of 643 ... Issue, Title. Vol 18, No 2 (2015), Contraceptive Knowledge and Compliance with Guidelines for Providing Contraceptive Services by Patent Medicine Vendors In Ibadan North Local Government Area, Nigeria, Abstract PDF. OO Ajayi, AJ Ajuwon. Vol 16, No 2 (2013), Coping Strategy for Food Security ...

  9. Browse Title Index

    African Journals Online (AJOL)

    Items 851 - 900 of 1006 ... Issue, Title. Vol 54, No 2 (2012), The effect of the introduction of a standard monitoring protocol on the investigations performed on the metabolic control of type 2 diabetes at Addington Hospital Medical Outpatients Department, Durban, South Africa, Abstract PDF. JM Gill, A Ross, F Pirie, ...

  10. Browse Title Index

    African Journals Online (AJOL)

    Issue, Title. Vol 8, No 2 (2016): Supplement, Using operative models (ICF and CBR) within an interprofessional context to address community needs, Abstract PDF. A Rhoda, F Waggie, G.C. Filies, J.M. Frantz. Vol 2, No 1 (2010), Using portfolios to assess professional competence and development in medical laboratory ...

  11. Browse Title Index

    African Journals Online (AJOL)

    Items 51 - 100 of 412 ... Issue, Title. Vol 30, No 3 (2011) ... Transferring the principle of double effect from war to business, Abstract. G. J. Rossouw ... Vol 22, No 2 (2003), Can more business ethics teaching halt corruption in companies? Abstract.

  12. Browse Title Index

    African Journals Online (AJOL)

    Items 101 - 150 of 155 ... Issue, Title. Vol 12 (2012), Political Dissent and Autonomy in Wum Local Government, Southern (West) Cameroons, 1957 – 1968, Abstract. TP Mbeum. Vol 9 (2009), Post-Emancipation Slave Commerce: Increasing Child Slave Trafficking and Women's Agency in Late Nineteenth-century Ghana ...

  13. Browse Title Index

    African Journals Online (AJOL)

    Items 451 - 500 of 581 ... Issue, Title. Vol 30, No 1 (2016), Risky sexual behaviour and associated factors among students of Debre Tabor University, Northwest Ethiopia: a cross-sectional study, Abstract PDF. Awoke Derbie, Mekonnen Assefa, Daniel Mekonnen, Fantahun Biadglegne. Vol 28, No 1 (2014), Road traffic accident: ...

  14. Browse Title Index

    African Journals Online (AJOL)

    Items 451 - 500 of 1346 ... Issue, Title. Vol 32, No 1 (2015), Fire and the dynamics of two unpalatable grass species (Cymbopogon pospischilii and Elionurus muticus) in a semi-arid climate, Abstract. Hennie A Snyman. Vol 8, No 1 (1973), Fire as a method of controlling macchia (Fynos) vegetation on the Amathole Mountains of ...

  15. Browse Title Index

    African Journals Online (AJOL)

    Issue, Title. Vol 43, No 2 (2006), Review: "'n Wonderlike geweld. Jeugherinneringe", By Elsa Joubert (2005), Abstract PDF. Henriette Roos. Vol 53, No 1 (2016), Review: Breyten Breytenbach, A Monologue in Two Voices, Abstract PDF. Andy Carolin. Vol 53, No 1 (2016), Review: The Shadow of the Hummingbird, Abstract ...

  16. Browse Title Index

    African Journals Online (AJOL)

    Items 51 - 100 of 103 ... Issue, Title ... SE Edusah, E Osei-Tutu ... Vol 6, No 2 (2016), Interrelationships among unemployment, inflation and economic growth in Nigeria, Abstract .... Vol 4, No 3 (2014): Special Edition, Socio-cultural Issues for ...

  17. Browse Title Index

    African Journals Online (AJOL)

    Items 4351 - 4386 of 4386 ... Issue, Title. Vol 107, No 6 (2017), When students become patients: TB disease among medical undergraduates in Cape Town, South Africa, Abstract PDF. H van der Westhuizen, A Dramowski. Vol 106, No 4 (2016), Where do children die and what are the causes? Under-5 deaths in the Metro West ...

  18. Browse Title Index

    African Journals Online (AJOL)

    Issue, Title. Vol 10, No 2 (2014), Sorindeia warneckei Engl. (Anacardiaceae), une espèce multi-usagère de la dépression de la Lama au Togo, Abstract PDF. A Akodewou, S Akpavi, M Dourma, K Batawila, KB Amegnaglo, W Atakpama, K Akpagama. Vol 10, No 1 (2014), Sterculia setigera Del.: influence de quelques ...

  19. Browse Title Index

    African Journals Online (AJOL)

    Items 1 - 50 of 126 ... Issue, Title. Vol 8, No 2 (2016), 2010 FIFA World Cup stadium investment: Does the post-event usage justify the expenditure? Abstract PDF. Luke Humphrey, Gavin Fraser. Vol 6, No 1 (2014), 7Implication of mergers and acquisitions on stock returns before and during the 2007–2009 credit crunch: An ...

  20. Enabling high speed friction stir welding of aluminum tailor welded blanks

    Science.gov (United States)

    Hovanski, Yuri

    Current welding technologies for production of aluminum tailor-welded blanks (TWBs) are utilized in low-volume and niche applications, and have yet to be scaled for the high-volume vehicle market. This study targeted further weight reduction, part reduction, and cost savings by enabling tailor-welded blank technology for aluminum alloys at high-volumes. While friction stir welding (FSW) has traditionally been applied at linear velocities less than one meter per minute, high volume production applications demand the process be extended to higher velocities more amenable to cost sensitive production environments. Unfortunately, weld parameters and performance developed and characterized at low to moderate welding velocities do not directly translate to high speed linear friction stir welding. Therefore, in order to facilitate production of high volume aluminum FSW components, parameters were developed with a minimum welding velocity of three meters per minute. With an emphasis on weld quality, welded blanks were evaluated for post-weld formability using a combination of numerical and experimental methods. Evaluation across scales was ultimately validated by stamping full-size production door inner panels made from dissimilar thickness aluminum tailor-welded blanks, which provided validation of the numerical and experimental analysis of laboratory scale tests.

  1. Attentional Lapses in Attention-Deficit/Hyperactivity Disorder: Blank Rather Than Wandering Thoughts.

    Science.gov (United States)

    Van den Driessche, Charlotte; Bastian, Mikaël; Peyre, Hugo; Stordeur, Coline; Acquaviva, Éric; Bahadori, Sara; Delorme, Richard; Sackur, Jérôme

    2017-10-01

    People with attention-deficit/hyperactivity disorder (ADHD) have difficulties sustaining their attention on external tasks. Such attentional lapses have often been characterized as the simple opposite of external sustained attention, but the different types of attentional lapses, and the subjective experiences to which they correspond, remain unspecified. In this study, we showed that unmedicated children (ages 6-12) with ADHD, when probed during a standard go/no-go task, reported more mind blanking (a mental state characterized by the absence of reportable content) than did control participants. This increase in mind blanking happened at the expense of both focused and wandering thoughts. We also found that methylphenidate reverted the level of mind blanking to baseline (i.e., the level of mind blanking reported by control children without ADHD). However, this restoration led to mind wandering more than to focused attention. In a second experiment, we extended these findings to adults who had subclinical ADHD. These results suggest that executive functions impaired in ADHD are required not only to sustain external attention but also to maintain an internal train of thought.

  2. Comparison of two analytical models of blanking and proposal of a new model

    NARCIS (Netherlands)

    Klingenberg, W; Singh, UP

    With the development of accurate Finite Element models of the punching/blanking process by the present authors and other researchers, important possibilities emerged to model and analyse the process in a research environment. However, Finite Element models are less well suited for use in a

  3. Some Data Concerning the Vocational Preference Inventory Scales and the Strong Vocational Interest Blank

    Science.gov (United States)

    Cockriel, Irvin W.

    1972-01-01

    Occupational scales of the Vocational Preference Inventory were correlated with the Basic Interest scales of the Strong Vocational Interest Blank. The 285 subjects were women freshmen in a College of Education. The results indicate that the scales are not highly correlated. (Author)

  4. A big blank white canvas? Mapping and modeling human impact in Antarctica

    Science.gov (United States)

    Steve Carver; Tina Tin

    2015-01-01

    Antarctica is certainly what most people would consider being the world's last great wilderness; largely untouched and undeveloped by humans. Yet it is not inviolate - there are scientific bases, tourist operations, expeditions, airstrips and even roads. Although these impacts are by and large limited in extent, their very presence in an otherwise "blank...

  5. Use of Monocrystalline Silicon as Tool Material for Highly Accurate Blanking of Thin Metal Foils

    International Nuclear Information System (INIS)

    Hildering, Sven; Engel, Ulf; Merklein, Marion

    2011-01-01

    The trend towards miniaturisation of metallic mass production components combined with increased component functionality is still unbroken. Manufacturing these components by forming and blanking offers economical and ecological advantages combined with the needed accuracy. The complexity of producing tools with geometries below 50 μm by conventional manufacturing methods becomes disproportional higher. Expensive serial finishing operations are required to achieve an adequate surface roughness combined with accurate geometry details. A novel approach for producing such tools is the use of advanced etching technologies for monocrystalline silicon that are well-established in the microsystems technology. High-precision vertical geometries with a width down to 5 μm are possible. The present study shows a novel concept using this potential for the blanking of thin copper foils with monocrystallline silicon as a tool material. A self-contained machine-tool with compact outer dimensions was designed to avoid tensile stresses in the brittle silicon punch by an accurate, careful alignment of the punch, die and metal foil. A microscopic analysis of the monocrystalline silicon punch shows appropriate properties regarding flank angle, edge geometry and surface quality for the blanking process. Using a monocrystalline silicon punch with a width of 70 μm blanking experiments on as-rolled copper foils with a thickness of 20 μm demonstrate the general applicability of this material for micro production processes.

  6. Mohelno – A terminal Last Glacial Maximum industry with microlithic tools made on carenoidal blanks

    Czech Academy of Sciences Publication Activity Database

    Škrdla, Petr; Nejman, L.; Bartík, J.; Rychtaříková, Tereza; Nikolajev, Pavel; Eigner, J.; Nývltová Fišáková, Miriam; Novák, J.; Polanská, M.

    2016-01-01

    Roč. 406, 25 June 2016 (2016), s. 184-194 ISSN 1040-6182 R&D Projects: GA ČR GA15-19170S Keywords : Moravia * Mohelno * Epi-Gravettian * Epi-Aurignacian * Microlithic tools * Carenoidal blanks Subject RIV: AC - Archeology, Anthropology, Ethnology Impact factor: 2.199, year: 2016

  7. IDMS analysis of blank swipe samples for uranium quantity and isotopic composition

    International Nuclear Information System (INIS)

    Ryjinski, M.; Donohue, D.

    2001-01-01

    Since 1996 the IAEA has started routine implementation of environmental sampling. During the last 5 years more than 1700 swipe samples were collected and analyzed in the Network of Analytical Laboratories (NWAL). One sensitive point of analyzing environmental samples is evidence of the presence of enriched U. The U content on swipes is extremely low and therefore there is a relatively high probability of a false positive, e.g. small contamination or a measurement bias. In order to avoid and/or control this the IAEA systematically sends to the laboratories blind blank QC samples. In particular more than 50 blank samples were analyzed during the last two years. A preliminary analysis of blank swipes showed the swipe material itself contains up to 10 ng of NU per swipe. However, about 50% of blind blank swipes analyzed show the presence of enriched uranium. A source of this bias has to be clarified and excluded. This paper presents the results of modeling of IDMS analysis for quantity and isotopic composition of uranium in order to identify the possible contribution of different factors to the final measurement uncertainty. This modeling was carried out based on the IAEA Clean Laboratory measurement data and simulation technique

  8. Fill in the Blank: Culture Jamming and the Advertising of Agency

    Science.gov (United States)

    Lambert-Beatty, Carrie

    2010-01-01

    This article is a review on billboard liberation and some other projects that develop the idea of talking back or over advertising in a playful and youthful way. In one of them, Ji Lee's Bubble Project, an artist places blank thought-bubble stickers on street advertisements and waits to see what people write on them, completing the work of art and…

  9. Theoretical Analysis on Mechanical Deformation of Membrane-Based Photomask Blanks

    Science.gov (United States)

    Marumoto, Kenji; Aya, Sunao; Yabe, Hedeki; Okada, Tatsunori; Sumitani, Hiroaki

    2012-04-01

    Membrane-based photomask is used in proximity X-ray lithography including that in LIGA (Lithographie, Galvanoformung und Abformung) process, and near-field photolithography. In this article, out-of-plane deformation (OPD) and in-plane displacement (IPD) of membrane-based photomask blanks are theoretically analyzed to obtain the mask blanks with flat front surface and low stress absorber film. First, we derived the equations of OPD and IPD for the processing steps of membrane-based photomask such as film deposition, back-etching and bonding, using a theory of symmetrical bending of circular plates with a coaxial circular hole and that of deformation of cylinder under hydrostatic pressure. The validity of the equations was proved by comparing the calculation results with experimental ones. Using these equations, we investigated the relation between the geometry of the mask blanks and the distortions generally, and gave the criterion to attain the flat front surface. Moreover, the absorber stress-bias required to obtain zero-stress on finished mask blanks was also calculated and it has been found that only little stress-bias was required for adequate hole size of support plate.

  10. 47 CFR 73.646 - Telecommunications Service on the Vertical Blanking Interval and in the Visual Signal.

    Science.gov (United States)

    2010-10-01

    ... Blanking Interval and in the Visual Signal. 73.646 Section 73.646 Telecommunication FEDERAL COMMUNICATIONS... transmission of data, processed information, or any other communication in either a digital or analog mode. (b....646 Telecommunications Service on the Vertical Blanking Interval and in the Visual Signal. (a...

  11. 76 FR 14697 - Aleris Blanking and Rim Products, Inc., a Division of Aleris International, Inc., Terre Haute, IN...

    Science.gov (United States)

    2011-03-17

    ... Products, Inc., a Division of Aleris International, Inc., Terre Haute, IN; Notice of Revised Determination... workers of Aleris Blanking and Rim Products, Inc., a division of Aleris International, Inc., Terre Haute... Blanking and Rim Products, Inc., a division of Aleris International, Inc., Terre Haute, Indiana, who became...

  12. Browse Title Index

    African Journals Online (AJOL)

    Items 551 - 600 of 2200 ... Vol 13, No 1 (1983): Symposium, Effect of diet and physiological state ... Effect of dietary energy level on efficiency of SA Mutton Merino ... Vol 40, No 2 (2010), Effect of dietary olive leaves and rosemary on microbial growth ... biochemical parameters and antioxidant status of laying hens, Abstract PDF.

  13. Browse Title Index

    African Journals Online (AJOL)

    Items 751 - 800 of 11090 ... Vol 6, No 14 (2007), An investigation on pin head formation time of Agaricus bisporus on wheat straw and waste tea leaves based composts using some locally .... Vol 9, No 31 (2010), Analysis and determination of mercury, cadmium and lead in canned tuna fish marketed in Iran, Abstract PDF.

  14. Browse Title Index

    African Journals Online (AJOL)

    Items 151 - 200 of 913 ... Vol 6, No 1 (2014), Comparative Study of Honey Collected from ... Binary Artificial Bee Colony (BABC) for nonlinear autoregressive ... Vol 9, No 2 (2017), Comparison of protein extraction methods for the leaves of Ficus ...

  15. Browse Title Index

    African Journals Online (AJOL)

    Items 251 - 300 of 364 ... Vol 8, No 3 (2009), Progress In Breeding Diploid Genetic Stocks Of Banana With Resistance To Black Sigatoka, Abstract PDF. DN Igili, KP Baiyeri, ML Uguru, A Tenkouano. Vol 14, No 2 (2015), Proximate and anti-nutritional composition of leaves and seeds of Moringa oleifera in Nigeria: a comparative ...

  16. Browse Title Index

    African Journals Online (AJOL)

    Items 1 - 19 of 19 ... Vol 23 (2007), Effect Of Different Degrees Of Hepatic Dysfunction On The Pharmacokinetics Of Telmisartan, Abstract ... Vol 23 (2007), Effect Of Green Leaves And Germination And Boiling Treatments Of Fenugreek And Lupin Seeds On Chemical Composition, Serum Glucose, ... S A El-Adawy, A A Ramadan.

  17. Browse Title Index

    African Journals Online (AJOL)

    Items 851 - 900 of 913 ... ... The role of tourism industry in the GDP growth of hamedan province, Abstract PDF ... of exchange rates behavior in Malaysia by using NATREX model ... henna leaves extract as green corrosion inhibitor for mild steel in ...

  18. Browse Title Index

    African Journals Online (AJOL)

    Items 4051 - 4100 of 11090 ... Vol 6, No 18 (2007), Effects of aqueous leaves extract of Ocimum gratissimum on blood glucose levels of streptozocininduced diabetic wistar rats, Abstract ... Vol 11, No 15 (2012), Effects of bran, shorts and feed flour by ultra-fine grinding on rheological characteristics of dough and bread qualities ...

  19. Browse Title Index

    African Journals Online (AJOL)

    Items 1 - 50 of 316 ... Vol 2 (1998), ANTIBACTERIAL ACTIVITIES OF THE VOLATILE OIL AND AQUEOUS EXTRACT OF MURRAYA KOENIGII LEAVES, Abstract. O Akerele, BA Ayinde. Vol 4 (2000), ANTIBACTERIAL ACTIVITY OF SALACIA PYRIFORMIS, Abstract. Ching Fidelis Poh. Vol 2 (1998), ANTIBACTERIAL ACTIVITY ...

  20. Browse Title Index

    African Journals Online (AJOL)

    Items 51 - 100 of 160 ... Vol 1, No 1 (2010), Gaseous fuel production by anaerobic fungal degradation of banana leaves, Abstract PDF. M M Ekwenchi, M N ... Vol 7, No 2 (2016), Levels of Lambda-Cyhalothrin and polychlorinated biphenyls residues in some herbal remedies from Northwest Nigeria, Abstract PDF. A.A. Bello, A ...

  1. Browse Title Index

    African Journals Online (AJOL)

    Items 51 - 100 of 193 ... Vol 3, No 1 (2001), Effect of Bioregulators on Apple Yield and ... Storage Life and Quality of Spinach (Spinacea oleracea L) Leaves ... fertilizers on growth, flowering and yield of strawberry (Fragaria X ... No 2 (2012), Effect of rain water harvesting and drip irrigation on crop ... B Kaunda-Arara, MJ Ntiba.

  2. Browse Title Index

    African Journals Online (AJOL)

    Items 8501 - 8550 of 11090 ... Log in or Register to get access to full text downloads. ... fruit and leaves with cabbage peels as a natural feedstuff in the diet of Achatina ... JC Obeta, CV Agu, OU Njoku, CC Okonkwo, EG Anaduaka ... Vol 10, No 81 (2011), Prediction of significant factors in the production of ethanol by ragi tapai ...

  3. Browse Title Index

    African Journals Online (AJOL)

    Items 51 - 72 of 72 ... Vol 12 (2008), Suspension Properties Of Binary Mixtures Of Tragacanth Gum And Irvingia gabonensis Gum, Abstract. MA Momoh, JI Ogbonna, UE Nwachi, EC Ibezim. Vol 14 (2010), The Anti-Sickling Properties of Ethanol Extracts of Euphorbia heterophylla and Moringa oleifera Leaves, Abstract.

  4. Parental Leave in Denmark

    DEFF Research Database (Denmark)

    Rostgaard, Tine; Christoffersen, Mogens; Weise, Hanne

    This artcle considders the political aims for different leave schemes and reviews studies af these schemes. The use of parental leave is sensitive to the financial loss involved in taking leave: a decrease in the benefit payments has had a significant influence on take-up, while, in general, fami......, families'' loss of income is less if leave is taken up by the mothers. Only few fathers participate in parental leave....

  5. Forming Of Spherical Titanium Cups From Circular Blanks With Cutouts On The Perimeter

    Directory of Open Access Journals (Sweden)

    Lacki P.

    2015-06-01

    Full Text Available Despite substantial demand for drawn parts made of high-strength sheet metal (including titanium alloys observed in the modern industry, particularly automotive and aviation, their application remains insignificant. This results from the fact that such sheet metal shows poor plasticity and its cold-forming is almost impossible. Low drawability makes it impossible to obtain even such simple shapes as spherical cups. The authors of this study developed circular sheet-metal blanks with cutouts on their perimeter. The blanks allow for cold forming of spherical cups from Ti6Al4V titanium alloy sheet metal using conventional rigid tools. The cutouts proposed in the study affect plastic strain distribution, which in turn leads to an increase in forming depth by about 30%. The numerical analysis, performed using the PamStamp 2G System software based on finite element method, was verified experimentally.

  6. Study on the process of calibration and deep centring of blanks

    International Nuclear Information System (INIS)

    Potapov, I.N.; Romantsev, B.A.; Popov, V.A.; Volodin, V.V.; Goncharuk, A.V.

    1985-01-01

    Process of calibration and deep centring of blanks before broaching is developed and studied. Investigations are performed at a semi-industrial screw rolling mill MISiS-100 T. Blanks made of 40Kh, 60, 50, 45KhN2MFA, 30KhGSNA steels 80, 85, and 90 mm in diameter and 300 mm long were calibrated and centered after heating in a furnace to a depth of 200 mm at shafts and faces with different calibration. 30KhN2MFA steel is chosen for face material; heat treatment is conducted under the following conditions: heating up to 950-1000 deg C and hold-up during 30-35 min with the following cooling in the air. The above experimental investigations reveal that the process of calibration and deep centring accomplished at a three-shaft screw rolling mill is rather stable and provides a high accuracy of centering hollow marking

  7. Cold pressure welding of aluminium-steel blanks: Manufacturing process and electrochemical surface preparation

    Science.gov (United States)

    Schmidt, Hans Christian; Homberg, Werner; Orive, Alejandro Gonzalez; Grundmeier, Guido; Hordych, Illia; Maier, Hans Jürgen

    2018-05-01

    In this study the manufacture of aluminium-steel blanks by cold pressure welding and their preparation for a welding process through electrochemical surface treatment are investigated and discussed. The cold pressure welding process was done with an incremental rolling tool that allows for the partial pressure welding of two blanks along a prepared path. The influence of the surface preparation by electrochemical deposition of bond promoting organosilane-based agents and roughening on a nano-scale is investigated and compared to conventional surface treatments. Coating the surfaces with a thin organosilane-based film incorporating specific functional groups should promote additional bonding between the mating oxide layers; its influence on the total weld strength is studied. Pressure welding requires suitable process strategies, and the current advances in the proposed incremental rolling process for the combination of mild steel and aluminium are presented.

  8. Correction to the count-rate detection limit and sample/blank time-allocation methods

    International Nuclear Information System (INIS)

    Alvarez, Joseph L.

    2013-01-01

    A common form of count-rate detection limits contains a propagation of uncertainty error. This error originated in methods to minimize uncertainty in the subtraction of the blank counts from the gross sample counts by allocation of blank and sample counting times. Correct uncertainty propagation showed that the time allocation equations have no solution. This publication presents the correct form of count-rate detection limits. -- Highlights: •The paper demonstrated a proper method of propagating uncertainty of count rate differences. •The standard count-rate detection limits were in error. •Count-time allocation methods for minimum uncertainty were in error. •The paper presented the correct form of the count-rate detection limit. •The paper discussed the confusion between count-rate uncertainty and count uncertainty

  9. HEATING OF BLANK IN FORM OF PRISM IN ACCORDANCE WITH TECHNOLOGICAL LIMITATIONS

    Directory of Open Access Journals (Sweden)

    V. B. Kovalevsky

    2009-01-01

    Full Text Available The paper considers a problem on optimum heating control of a blank in the form of prism under complicated conditions of heat-transfer in accordance with criteria of gas consumption minimization, decarburized layer and scaling. Numerical algorithm of the problem solution and examples are given in the paper. A new technology of the flame furnace operation has been developed in the paper. 

  10. Development of high sensitivity and high speed large size blank inspection system LBIS

    Science.gov (United States)

    Ohara, Shinobu; Yoshida, Akinori; Hirai, Mitsuo; Kato, Takenori; Moriizumi, Koichi; Kusunose, Haruhiko

    2017-07-01

    The production of high-resolution flat panel displays (FPDs) for mobile phones today requires the use of high-quality large-size photomasks (LSPMs). Organic light emitting diode (OLED) displays use several transistors on each pixel for precise current control and, as such, the mask patterns for OLED displays are denser and finer than the patterns for the previous generation displays throughout the entire mask surface. It is therefore strongly demanded that mask patterns be produced with high fidelity and free of defect. To enable the production of a high quality LSPM in a short lead time, the manufacturers need a high-sensitivity high-speed mask blank inspection system that meets the requirement of advanced LSPMs. Lasertec has developed a large-size blank inspection system called LBIS, which achieves high sensitivity based on a laser-scattering technique. LBIS employs a high power laser as its inspection light source. LBIS's delivery optics, including a scanner and F-Theta scan lens, focus the light from the source linearly on the surface of the blank. Its specially-designed optics collect the light scattered by particles and defects generated during the manufacturing process, such as scratches, on the surface and guide it to photo multiplier tubes (PMTs) with high efficiency. Multiple PMTs are used on LBIS for the stable detection of scattered light, which may be distributed at various angles due to irregular shapes of defects. LBIS captures 0.3mμ PSL at a detection rate of over 99.5% with uniform sensitivity. Its inspection time is 20 minutes for a G8 blank and 35 minutes for G10. The differential interference contrast (DIC) microscope on the inspection head of LBIS captures high-contrast review images after inspection. The images are classified automatically.

  11. High-Speed Friction-Stir Welding to Enable Aluminum Tailor-Welded Blanks

    Science.gov (United States)

    Hovanski, Yuri; Upadhyay, Piyush; Carsley, John; Luzanski, Tom; Carlson, Blair; Eisenmenger, Mark; Soulami, Ayoub; Marshall, Dustin; Landino, Brandon; Hartfield-Wunsch, Susan

    2015-05-01

    Current welding technologies for production of aluminum tailor-welded blanks (TWBs) are utilized in low-volume and niche applications, and they have yet to be scaled for the high-volume vehicle market. This study targeted further weight reduction, part reduction, and cost savings by enabling tailor-welded blank technology for aluminum alloys at high volumes. While friction-stir welding (FSW) has been traditionally applied at linear velocities less than 1 m/min, high-volume production applications demand the process be extended to higher velocities more amenable to cost-sensitive production environments. Unfortunately, weld parameters and performance developed and characterized at low-to-moderate welding velocities do not directly translate to high-speed linear FSW. Therefore, to facilitate production of high-volume aluminum FSW components, parameters were developed with a minimum welding velocity of 3 m/min. With an emphasis on weld quality, welded blanks were evaluated for postweld formability using a combination of numerical and experimental methods. An evaluation across scales was ultimately validated by stamping full-size production door inner panels made from dissimilar thickness aluminum TWBs, which provided validation of the numerical and experimental analysis of laboratory-scale tests.

  12. Goodbye, Mandatory Maternity Leaves

    Science.gov (United States)

    Nation's Schools, 1972

    1972-01-01

    In precedent-setting decrees, courts and federal and State authorities have branded compulsory maternity leaves either unconstitutional or illegal. School administrators are urged to prod boards of education to adopt more lenient maternity leave policies -- now. (Author)

  13. Leaving home in Denmark

    DEFF Research Database (Denmark)

    Nielsen, Rikke Skovgaard

    2015-01-01

    The paper focuses on ethnic differences in the timing and patterns of leaving the parental home. Leaving home is a key transition in the life course of the individual, and extensive research has been conducted on the timing and patterns of leaving it. However, ethnic differences in these patterns...... of leaving home. Results showed that while some differences disappeared when controlling for covariates, others persisted, thus indicating ethnic differences in home-leaving patterns. A strong link between leaving home and marriage was substantiated for Turks, but not for Somalis. The home-leaving patterns...... of Somalis were much more similar to those of Danes. Overall, Turkish descendants were similar to Turkish immigrants but with some differentiation. The analyses identified the existence of ethnic differences in home-leaving patterns but also found evidence of a shift towards less traditional patterns, i...

  14. MATERIAL CHOICE AND BLANKS OPERATION TECHNOLOGY OF AK6 ALUMINIUM ALLOY

    Directory of Open Access Journals (Sweden)

    N. YE. Kalinina

    2014-03-01

    Full Text Available Purpose. Justification of the material and heat treatment method of aluminum alloy for the manufacturing of parts, type «plate» based on the results of microstructure and mechanical properties research; development of technological process of blanks operation of AK6 aluminum alloy. Methodology. Powdered alloy based on aluminum type AK6 was the research material. Finished forgings with the size 2520×1520×65 mm were obtained as a result of the preparation and forging of the blanks. After mechanical treatment of the blanks they were exposed to thermal processing and milling. Structure of the metal was examined under light microscope MIM-8M. Brinell hardness was used as the strength alloy characteristic. Findings. Influence analysis of alloy elements on the structure of deformable aluminum alloys was carried out. Research of influence of heat treatment modes on structure and properties of the AK6 alloy were performed. The improved technological process, which made it possible to obtain the item with the improved structure and properties and lower costs is offered. Originality. The samples of AK6 powdered alloy on fire resistance were tested. It is established that under heating of an example in the oxidative flame, it does not ignite to a temperature of 705 °C. The cause of high fire resistance of AK6 alloy samples was found, it is connected with the presence in the material the evenly distributed, small oxide inclusions and amorphous oxide film on the surface. Practical value. Hard conditions of work (corrosion in marine and industrial atmosphere, static and shock loads, cyclic temperature allow the use of the item in various designs.

  15. Development technique for deep drawing without blank holder to produce circular cup of brass alloy

    OpenAIRE

    Ali Hassan Saleh; Ammer Khalaf Ali

    2015-01-01

    Of this technique compared to the conventional deep drawing is that the circular cup can be carried out in single action press with limit In this paper a new mechanism for deep drawing was proposed to produce circular cup from thin plate without blank holder. In this technique the die assembly includes punch, die and die-punch. A 2D axisymmetric finite element model was built using DEFORM software. Effect of die geometry (half- cone angle) on maximum load, thickness distribution, strain distr...

  16. Blank Field Sources in the ROSAT HRI Brera Multiscale Wavelet catalog

    OpenAIRE

    Chieregato, M.; Campana, S.; Treves, A.; Moretti, A.; Mignani, R. P.; Tagliaferri, G.

    2005-01-01

    The search for Blank Field Sources (BFS), i.e. X-ray sources without optical counterparts, paves the way to the identification of unusual objects in the X-ray sky. Here we present four BFS detected in the Brera Multiscale Wavelet catalog of ROSAT HRI observations. This sample has been selected on the basis of source brightness, distance from possible counterparts at other wavelengths, point-like shape and good estimate of the X-ray flux (f_X). The observed f_X and the limiting magnitude of th...

  17. An evaluation testing technique of single event effect using Beam Blanking SEM

    Energy Technology Data Exchange (ETDEWEB)

    Aoki, J; Hada, T; Pesce, A; Akutsu, T; Matsuda, S [National Space Development Agency of Japan, Tsukuba, Ibaraki (Japan). Tsukuba Space Center; Igarashi, T; Baba, S

    1997-03-01

    Beam Blanking SEM (Scanning Electron Microscope) testing technique has been applied to CMOS SRAM devices to evaluate the occurence of soft errors on memory cells. Cross-section versus beam current and LET curves derived from BBSEM and heavy ion testing technique, respectively, have been compared. A linear relation between BBSEM current and heavy ion LET has been found. The purpose of this study was to demonstrate that the application of focused pulsed electron beam could be a reliable, convenient and inexpensive tool to investigate the effects of heavy ions and high energy particles on memory devices for space application. (author)

  18. Negative leave balances

    CERN Multimedia

    Human Resources Department

    2005-01-01

    Members of the personnel entitled to annual leave and, where appropriate, saved leave and/or compensatory leave are requested to take note of the new arrangements described below, which were recommended by the Standing Concertation Committee (SCC) at its meeting on 1Â September 2005 and subsequently approved by the Director-General. The changes do not apply to members of the personnel participating in the Progressive Retirement Programme (PRP) or the Part-time Work as a pre-retirement measure, for whom the specific provisions communicated at the time of joining will continue to apply. Â Negative balances in annual leave, saved leave and/or compensatory leave accounts at the end of the leave year (30th September) and on the date on which bonuses are credited to the saved leave account (31st December): Where members of the personnel have a leave account with a negative balance on 30Â September and/or 31Â December, leave will automatically be transferred from one account to another on the relevant dates i...

  19. Negative leave balances

    CERN Multimedia

    Human Resources Department

    2005-01-01

    Members of the personnel entitled to annual leave and, where appropriate, saved leave and/or compensatory leave are requested to take note of the new arrangements described below, which were recommended by the Standing Concertation Committee (SCC) at its meeting on 1 September 2005 and subsequently approved by the Director-General. The changes do not apply to members of the personnel participating in the Progressive Retirement Programme (PRP) or the Part-time Work as a pre-retirement measure, for whom the specific provisions communicated at the time of joining will continue to apply.  Negative balances in annual leave, saved leave and/or compensatory leave accounts at the end of the leave year (30th September) and on the date on which bonuses are credited to the saved leave account (31st December): Where members of the personnel have a leave account with a negative balance on 30 September and/or 31 December, leave will automatically be transferred from one account to another on the relevant dates in or...

  20. Application of the diode laser for welding in tairoled blanks; Aplicaciond el lase de diodo para la soldadura en tailored blanks

    Energy Technology Data Exchange (ETDEWEB)

    Bocos, J. L.; Zubiri, F.; Garciandia, F.; Pena, J.; Cortiella, A.; Berrueta, J. M.; Zapirain, F.

    2004-07-01

    During the last years, one of the most interesting subjects in the automotive industry is the weight reduction of the automobile, and so to diminish the fuel consumption. Among other performance, the use in the body car of materials which have high mechanical resistance must be considered for the weight reduction of the automobile and maintaining high benefits. In this work, it has been studied the utilization of the diode laser for high resistance steel sheets welding, concretely microalloying steels (ZStE), DP dual phase and TRIP transformation induced plasticity. These steels can be employed in tailored blanks, which are defined as two or more separate pieces of flat material of dissimilar thickness and/or physical properties joined together before forming, to provide superior qualities in the finished stamped part. In this study, the metallographic characterization has been realised in the welding seams, and the mechanical behaviour has been analysed employing the following tests: microhardenss, drawing, tensile and fatigue. (Author) 15 refs.

  1. Zinc Finger Takes on a Whole New Meaning: Reducing and Monitoring Zinc Blanks in the Isotope Lab

    Science.gov (United States)

    Wilkes, E. B.; Wasylenki, L. E.; Anbar, A. D.

    2010-12-01

    In terms of avoiding contamination, zinc is one of the most difficult elements to study isotopically. The reason for this is that zinc stearate is a very common mold release agent in the production of plastics, including those most often used in isotope geochemistry clean labs. While polyethylene bottles, polypropylene centrifuge tubes, pipette tips, and Kimwipes are all potential sources of contaminant zinc, by far the largest amount of zinc is introduced to the laboratory by gloves. Most items can be effectively rid of zinc by soaking in dilute hydrochloric acid, but gloves cannot be cleaned easily, and use of gloves can quickly lead to contamination on many surfaces throughout the lab. We recently conducted several experiments in which dissolved zinc was partly adsorbed onto synthetic Mn oxyhydroxide particles. The dissolved and adsorbed pools were separated by filtration, purified with ion exchange chemistry, and analyzed for isotope composition by MC-ICP-MS. We used a commercially purchased ICP standard solution both as our standard (delta66/64Zn = 0) and as the source of the zinc in the experiments. Whenever gloves were worn during purification, process blanks contained as much as 150 ng Zn, and both the dissolved and adsorbed pools of zinc came out enriched in heavy isotopes relative to the starting pool, contrary to our expectation of mass balance. When gloves were not worn, blanks were brands of vinyl gloves, including one brand recommended to us for being “low” in zinc, measured +10‰ relative to our standard. We therefore concluded that glove zinc contaminated most of our experimental samples. We were only able to see such clear evidence of contamination because (1) we were doing an experiment in which we expected one light and one heavy pool of zinc compared to our standard, and (2) we happened to use an ICP standard solution for delta = 0 that is strongly enriched in light isotopes relative to both brands of gloves. We caution others who measure

  2. Enhancing native defect sensitivity for EUV actinic blank inspection: optimized pupil engineering and photon noise study

    Science.gov (United States)

    Wang, Yow-Gwo; Neureuther, Andrew; Naulleau, Patrick

    2016-03-01

    In this paper, we discuss the impact of optimized pupil engineering and photon noise on native defect sensitivity in EUV actinic blank inspection. Native defects include phase-dominated defects, absorber defects, and defects with a combination of phase and absorption behavior. First, we extend the idea of the Zernike phase contrast (ZPC) method and study the impact of optimum phase shift in the pupil plane on native defect sensitivity, showing a 23% signal-to-noise ratio (SNR) enhancement compare to bright field (BF) for a phase defect with 20% absorption. We also describe the possibility to increase target defect SNR on target defect sizes at the price of losing the sensitivity on smaller (non-critical) defects. Moreover, we show the advantage of the optimized phase contrast (OZPC) method over BF EUV actinic blank inspection. A single focus scan from OZPC has better inspection efficiency over BF. Second, we make a detailed comparison between the phase contrast with apodization (AZPC) method and dark field (DF) method based on defect sensitivity in the presence of both photon shot noise and camera noise. Performance is compared for a variety of photon levels, mask roughness conditions, and combinations of defect phase and absorption.

  3. Technique for rapid at-wavelength inspection of extreme ultraviolet mask blanks

    International Nuclear Information System (INIS)

    Spector, S. J.; White, D. L.; Tennant, D. M.; Ocola, L. E.; Novembre, A. E.; Peabody, M. L.; Wood, O. R. II

    1999-01-01

    We have developed two new methods for at-wavelength inspection of mask blanks for extreme-ultraviolet (EUV) lithography. In one method an EUV photoresist is applied directly to a mask blank which is then flood exposed with EUV light and partially developed. In the second method, the photoresist is applied to an EUV transparent membrane that is placed in close proximity to the mask and then exposed and developed. Both reflectivity defects and phase defects alter the exposure of the resist, resulting in mounds of resist at defect sites that can then be located by visual inspection. In the direct application method, a higher contrast resist was shown to increase the height of the mounds, thereby improving the sensitivity of the technique. In the membrane method, a holographic technique was used to reconstruct an image of the mask, revealing the presence of very small defects, approximately 0.2 μm in size. The demonstrated clean transfer of phase and amplitude defects to resist features on a membrane will be important when flagging defects in an automatic inspection tool. (c) 1999 American Vacuum Society

  4. The Temporary Leave Dilemma -

    DEFF Research Database (Denmark)

    Amilon, Anna

    2010-01-01

    Lone mothers have to take care of a sick child with little or no help from the child’s other parent and have to carry all costs connected to leave-taking. This paper empirically tests whether lone mothers take more temporary parental leave to care for sick children than partnered mothers...... and whether parental leave is associated with a signaling cost. The results from this study of Swedish mothers show that lone mothers use more temporary parental leave than partnered mothers. Further, within the group of lone mothers, those with higher socioeconomic status take less temporary parental leave...... than those with lower socioeconomic status, whereas no such differences are found within the group of partnered mothers. One possible interpretation is that signaling costs negatively influence the utilization of temporary parental leave for lone mothers....

  5. 32 CFR 644.62 - Title evidence.

    Science.gov (United States)

    2010-07-01

    ... HANDBOOK Acquisition Procurement of Title Evidence, Title Clearance, and Closings § 644.62 Title evidence... and their charter to issue the same. They must also be financially sound and be willing and able to...

  6. Production of annular blanks for Mo-99 using natural uranium, LEU uranium, nickel and structural Al-3003 plates

    International Nuclear Information System (INIS)

    Lisboa, J.R.; Barrera, M.E.; Marin, J.

    2010-01-01

    The Tc-99m radioisotope for medical use is the one most used in nuclear medicine worldwide. In Chile the Tc-99m is applied in more than 90% of nuclear medicine studies. In order to supply the whole country with this radioisotope, in 2005-2007 the CCHEN developed its own production of Tc-99m generators from Mo-99 imported from Canada, which are prepared with the activity needed by the Chilean hospitals and clinics. As of 2007 Mo-99 was no longer imported, and since then the Tc-99m is produced only by neutron activation of the Mo. The present challenge is to produce Mo-99 by irradiating blanks that contain enriched uranium foils, with locally produced LEU. The annular blank consists of 2 concentric tubes of A1-3003 structural aluminum that, in an interior annular space, contain a LEU foil, covered on both sides by a nickel foil. This work presents the development of the production technology for annular blanks using natural uranium and U-325 enriched uranium. The structural components are made with A1-3003 aluminum alloy, the foils are 13 grams of uranium measuring 100 x 50 mm and 120-150 μ thick. The blank was assembled using a methodology to control, adapt and assemble the blank's different internal components. A foil of natural uranium and LEU uranium, and a nickel foil are included, used as a barrier for the escape of fission products. During the blank's expansion, for analysis alcohol as lubricant was used, allowing the expander to move smoothly through the inside of the blank. The blank was sealed by TIG welding with a pulsed AC current and a mixture of Ar-5% He gases. Two methods were used for the water tightness test; for high escape levels the temperature was used as a promoter of the ΔP provided by hot water and liquid nitrogen, for low escape levels high vacuum technology was used where the ΔP is provided by a high pressure helium atmosphere. The technology for the production of annular LEU blanks was achieved by applying innovations to technologies

  7. Warm Deep Drawing of Rectangular Parts of AZ31 Magnesium Alloy Sheet Adopting Variable Blank Holder Force

    International Nuclear Information System (INIS)

    Peng Yinghong; Chang Qunfeng; Li Dayong; Zeng Xiaoqin

    2007-01-01

    AZ31 magnesium alloy sheet with good shape and formability is fabricated by warm cross rolling. Uniaxial tensile tests are conducted using a Gleeble 3500 thermal - mechanical simulator, and the mechanical properties of AZ31 magnesium alloy sheet are analyzed. A warm deep drawing process of square part is also simulated by the finite element method. The influences of blank holder force on the formability are numerically investigated. A double-action hydraulic press that can realize adjustable blank holder forces is developed and its working principle and control system are introduced. Some warm deep drawing experiments of square parts of AZ31 magnesium alloy sheet are also performed. Different variation schemes of the blank holder force with the stroke of the punch are tested, and the experiment results are compared. Results show that the suitable blank holder force variation scheme is a ladder curve with the punch stroke. Adopting the variable blank holder force technique can improve 13.2% of the drawing depth of square parts of AZ31 magnesium alloy sheet

  8. Region 7 Title V facilities

    Data.gov (United States)

    U.S. Environmental Protection Agency — This web map shows the Region 7 Title V facilities (Clean Air Act major sources), any Class I areas within 300 km of R7 States, and any Tribal areas within 50 miles...

  9. Title V Permitting Statistics Inventory

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Title V Permitting Statistics Inventory contains measured and estimated nationwide statistical data, consisting of counts of permitted sources, types of permits...

  10. Tool life equation for blanking 18-8 stainless steel strips

    Directory of Open Access Journals (Sweden)

    Faura, F.

    1998-08-01

    Full Text Available Hereinafter it is presented a model for the behaviour and life of circular blanking tool used in sheet forming processes of 18-8 stainless steel (sheet thickness: 1 mm. Firstly it has analyzed the different studies that have previously delt with this problem. Secondly taking into account recently made experiments, it is proposed a simple formulation to predict tool life with enough reliability. To this purpose it has examined different parameters in the wear process, inferring from these the fundamental parameters that regulate them and about which the different equations have been configurated. Blanking tests were performed using a 20 t press at a speed of 150 strokes/min. Punch materials used in these tests were AISI A2 and AISI D2 with diameters between 1.5 and 10 mm. The blanking tests were performed at a clearance between 5 and 20 % of the work material thickness.

    En el presente artículo se presenta un modelo de ecuación de vida de herramientas para punzonado circular de chapa de acero inoxidable 18-8 (1 mm de espesor. Se han analizado inicialmente los diferentes estudios que previamente han abordado este problema. Posteriormente, teniendo en cuenta los experimentos realizados recientemente, se propone una formulación simple para predecir con Habilidad suficiente la vida de la herramienta. Para este propósito se han examinado los diferentes parámetros que afectan al proceso de desgaste, infiriendo a partir de estos, los parámetros fundamentales que lo regulan y sobre los cuales se han configurado las diferentes ecuaciones. Los ensayos fueron realizados en una prensa de 20 t y una velocidad de punzonado de 150 golpes/min. Los materiales de los punzones usados en los ensayos fueron AISI A2 y AISI D2 con diámetros comprendidos entre 1,5 y 10 mm. Los ensayos se realizaron para juegos de corte comprendidos entre un 5 y 20 % del espesor de la chapa.

  11. Take It, Leave It, Fold It

    DEFF Research Database (Denmark)

    Elias, Camelia

    2008-01-01

    This introduction to the volume sets the tone for a reading experience of Federman's works. Since the early 60s, Raymond Federman has been one of the most important American writers. In his highly experimental fictions, in works that bear such titles as Take It or Leave It, Double or Nothing......, and The Twofold Vibrations, he has explored cultural and personal memory, invented intricate narrative strategies, and above all has given readers an experience that exceeds the ordinary. Creating situations that make one really think and really laugh is a tall order for any writer. But Federman did it. He is one...

  12. Filling in the Blank:a Postmodern Experiment on Fiction and Human Existence

    Institute of Scientific and Technical Information of China (English)

    沈冬欢

    2014-01-01

    In his short story collection Lost in the Funhouse, John Barth attempts to deal with the existential plights that fictional writing and human beings are faced with.“Title”, the most postmodern story in the collection, centers on the issue of“filling in the blank,”in which Barth leads readers to solve the problem and create the story with him. To examine Barth’s postmodern ex-periment in“Title”, this paper mainly focuses on the following three questions:what is the“blank”? How to fill in it? Why to fill in it in that way? By answering them, we may see how Barth reconciles the conflict between the urgency of“filling in the blank”and the failure of filling them.

  13. Blank book on energy: priority to renewable energies and energy savings

    International Nuclear Information System (INIS)

    Anon.

    2003-01-01

    The British minister of industry and trade has presented a blank book on energy. This report has in view to curb the emission of greenhouse gases by 60 % before 2050 and to double the contribution of renewable energies by 2020 with an intermediate objective of 10 % in 2010. Today this contribution reaches 3 %. New nuclear power plants are not expected to be built. This report recalls that the United-Kingdom (UK) imports half the coal it needs and states that by 2006 UK will become a net gas importing country and by 2010 a net oil importing country. The solution promoted by the report is to rely on diverse energy sources and on diverse supplying countries. (A.C.)

  14. Computer simulation of quenching uranium-0.75% titanium penetrator blanks. Final report for FY 1984

    International Nuclear Information System (INIS)

    Llewellyn, G.H.; Aramayo, G.A.; Childs, K.W.; Ludtka, G.M.; Siman-Tov, M.

    1985-02-01

    The models developed can be used as a basis to understand, study, and optimize the process. Information obtained from these models can be used to analytically predict temperature distribution, cooling rates, stresses, deformation, phase composition, and possibly the prediction of void formations, all as functions of both position and time. It was demonstrated that nonsymmetrical boundary conditions can lead to bowing of the penetrator blanks and applicable techniques were developed to optimize the quenching process. Experiments for deriving physical and mechanical properties for the uranium-0.75% Ti alloy including data on the heats of transformation have been performed. It is concluded that the contribution of the transformation heat constitutes about 19% of the total heat transfer involved and is, therefore, a significant factor affecting the metallurgical behavior of the alloy during the quenching operation. This behavior is less sensitive to the dependence of the property data on temperature

  15. Towards automatic recognition of irregular, short-open answers in Fill-in-the-blank tests

    Directory of Open Access Journals (Sweden)

    Sergio A. Rojas

    2014-01-01

    Full Text Available Assessment of student knowledge in Learning Management Systems such as Moodle is mostly conducted using close-ended questions (e.g. multiple-choice whose answers are straightforward to grade without human intervention. FILL-IN-THE-BLANK tests are usually more challenging since they require test-takers to recall concepts and associations not available in the statement of the question itself (no choices or hints are given. Automatic assessment of the latter currently requires the test-taker to give a verbatim answer, that is, free of spelling or typographical mistakes. In this paper, we consider an adapted version of a classical text-matching algorithm that may prevent wrong grading in automatic assessment of FILL-IN-THE-BLANK questions whenever irregular (similar but not exact answers occur due to such types of error. The technique was tested in two scenarios. In the first scenario, misspelled single-word answers to an Internet security questionnaire were correctly recognized within a two letter editing tolerance (achieving 99 % accuracy. The second scenario involved short-open answers to computer programming quizzes (i.e. small blocks of code requiring a structure that conforms to the syntactic rules of the programming language. Twenty-one real-world answers written up by students, taking a computer programming course, were assessed by the method. This assessment addressed the lack of precision in terms of programmer-style artifacts (such as unfamiliar variable or function nomenclature and uses an admissible tolerance of up to 20 % letter-level typos. These scores were satisfactory corroborated by a human expert. Additional findings and potential enhancements to the technique are also discussed.

  16. Experimental and numerical analysis of interlocking rib formation at sheet metal blanking

    Science.gov (United States)

    Bolka, Špela; Bratuš, Vitoslav; Starman, Bojan; Mole, Nikolaj

    2018-05-01

    Cores for electrical motors are typically produced by blanking of laminations and then stacking them together, with, for instance, interlocking ribs or welding. Strict geometrical tolerances, both on the lamination and on the stack, combined with complex part geometry and harder steel strip material, call for use of predictive methods to optimize the process before actual blanking to reduce the costs and speed up the process. One of the major influences on the final stack geometry is the quality of the interlocking ribs. A rib is formed in one step and joined with the rib of the preceding lamination in the next. The quality of the joint determines the firmness of the stack and also influences its. The geometrical and positional accuracy is thus crucial in rib formation process. In this study, a complex experimental and numerical analysis of interlocking rib formation has been performed. The aim of the analysis is to numerically predict the shape of the rib in order to perform a numerical simulation of the stack formation in the next step of the process. A detailed experimental research has been performed in order to characterize influential parameters on the rib formation and the geometry of the ribs itself, using classical and 3D laser microscopy. The formation of the interlocking rib is then simulated using Abaqus Explicit. The Hilll 48 constitutive material model is based on extensive and novel material characterization process, combining data from in-plane and out-of-plane material tests to perform a 3D analysis of both, rib formation and rib joining. The study shows good correlation between the experimental and numerical results.

  17. Minimization of the blank values in the neutron activation analysis of biological samples considering the whole procedure

    International Nuclear Information System (INIS)

    Lux, F.; Bereznai, T.; Trebert Haeberlin, S.

    1987-01-01

    During the determination of trace element contents of animal tissue by neutron activation analysis in the course of structure-activity relationship studies on platinum containing cancer drugs and wound healing the authors tried to minimize the blank values that are caused by different sources of contamination during surgery, sampling and the activation analysis procedure. The following topics were investigated: abrasions from scalpels made of stainless steel, titanium or quartz, the type of surgery, the surface contaminations of the quartz ampoules, etc. The measures to be taken to reduce tha blank values are described. (author) 19 refs.; 4 tables

  18. National Ignition Facility Title II Design Plan

    International Nuclear Information System (INIS)

    Kumpan, S

    1997-01-01

    This National Ignition Facility (NIF) Title II Design Plan defines the work to be performed by the NIF Project Team between November 1996, when the U.S. Department of Energy (DOE) reviewed Title I design and authorized the initiation of Title H design and specific long-lead procurements, and September 1998, when Title 11 design will be completed

  19. Falling for Clay Leaves.

    Science.gov (United States)

    Kernan, Christine

    2002-01-01

    Describes an art project that integrated science and art education. Explains that students create ceramic bowls by using real leaves. Discusses the process of creating the ceramic bowls, including how to glaze the bowls. Includes a list of materials. (CMK)

  20. Maternity Leave Policies

    Science.gov (United States)

    Strang, Lucy; Broeks, Miriam

    2017-01-01

    Abstract Over recent years many European Union countries have made changes to the design of the maternity leave provision. These policy developments reflect calls for greater gender equality in the workforce and more equal share of childcare responsibilities. However, while research shows that long period of leave can have negative effects on women's labour market attachment and career advancements, early return to work can be seen as a factor preventing exclusive breastfeeding, and therefore, potentially having negative health impacts for babies. Indeed, the World Health Organisation recommends exclusive breastfeeding up to 6 months of age to provide babies with the nutrition for healthy growth and brain development, protection from life-threatening ailments, obesity and non-communicable diseases such as asthma and diabetes. Therefore, labour market demands on women may be at odds with the health benefits for children gained by longer periods of maternity leave. The aim of this article is to examine the relationship between leave provision and health benefits for children. We examine maternity and parental leave provision across European countries and its potential impact on the breastfeeding of very young babies (up to 6-months of age). We also consider economic factors of potential extension of maternity leave provision to 6 months, such as costs to businesses, effects on the female labour market attachment, and wider consequences (benefits and costs) for individuals, families, employers and the wider society. PMID:28983432

  1. Testing the Reliability of Delay Discounting of Ten Commodities Using the Fill-in-the-Blank Method

    Science.gov (United States)

    Weatherly, Jeffrey N.; Derenne, Adam; Terrell, Heather K.

    2011-01-01

    Several measures of delay discounting have been shown to be reliable over periods of up to 3 months. In the present study, 115 participants completed a fill-in-the-blank (FITB) delay-discounting task on sets of 5 different commodities, 12 weeks apart. Results showed that discounting rates were not well described by a hyperbolic function but were…

  2. 75 FR 9436 - Aleris Blanking and Rim Products, Inc., a Division of Aleris International, Inc., Terre Haute, IN...

    Science.gov (United States)

    2010-03-02

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-72,041] Aleris Blanking and Rim Products, Inc., a Division of Aleris International, Inc., Terre Haute, IN; Notice of Affirmative Determination Regarding Application for Reconsideration By application dated January 29, 2010, the petitioner...

  3. EUV blank defect and particle inspection with high throughput immersion AFM with 1nm 3D resolution

    NARCIS (Netherlands)

    Es, M.H. van; Sadeghian Marnani, H.

    2016-01-01

    Inspection of EUV mask substrates and blanks is demanding. We envision this is a good target application for massively parallel Atomic Force Microscopy (AFM). We envision to do a full surface characterization of EUV masks with AFM enabling 1nm true 3D resolution over the entire surface. The limiting

  4. The Use of Application Blanks as Pre-Screening Devices in Employee Selection: An Assessment of Practices in Public Schools.

    Science.gov (United States)

    Bredeson, Paul V.

    1988-01-01

    Reports on a study of the use of employment application blanks as prescreening devices in public school employee selection. Findings suggest two major areas for further research. The first relates to legal compliance with Equal Opportunity Employment guidelines. The second concerns information relevancy to personnel selection. (JAM)

  5. Setup of a Parameterized FE Model for the Die Roll Prediction in Fine Blanking using Artificial Neural Networks

    Science.gov (United States)

    Stanke, J.; Trauth, D.; Feuerhack, A.; Klocke, F.

    2017-09-01

    Die roll is a morphological feature of fine blanked sheared edges. The die roll reduces the functional part of the sheared edge. To compensate for the die roll thicker sheet metal strips and secondary machining must be used. However, in order to avoid this, the influence of various fine blanking process parameters on the die roll has been experimentally and numerically studied, but there is still a lack of knowledge on the effects of some factors and especially factor interactions on the die roll. Recent changes in the field of artificial intelligence motivate the hybrid use of the finite element method and artificial neural networks to account for these non-considered parameters. Therefore, a set of simulations using a validated finite element model of fine blanking is firstly used to train an artificial neural network. Then the artificial neural network is trained with thousands of experimental trials. Thus, the objective of this contribution is to develop an artificial neural network that reliably predicts the die roll. Therefore, in this contribution, the setup of a fully parameterized 2D FE model is presented that will be used for batch training of an artificial neural network. The FE model enables an automatic variation of the edge radii of blank punch and die plate, the counter and blank holder force, the sheet metal thickness and part diameter, V-ring height and position, cutting velocity as well as material parameters covered by the Hensel-Spittel model for 16MnCr5 (1.7131, AISI/SAE 5115). The FE model is validated using experimental trails. The results of this contribution is a FE model suitable to perform 9.623 simulations and to pass the simulated die roll width and height automatically to an artificial neural network.

  6. Electrospun Blank Nanocoating for Improved Sustained Release Profiles from Medicated Gliadin Nanofibers

    Directory of Open Access Journals (Sweden)

    Xinkuan Liu

    2018-03-01

    Full Text Available Nanomaterials providing sustained release profiles are highly desired for efficacious drug delivery. Advanced nanotechnologies are useful tools for creating elaborate nanostructure-based nanomaterials to achieve the designed functional performances. In this research, a modified coaxial electrospinning was explored to fabricate a novel core-sheath nanostructure (nanofibers F2, in which a sheath drug-free gliadin layer was successfully coated on the core ketoprofen (KET-gliadin nanocomposite. A monolithic nanocomposite (nanofibers F1 that was generated through traditional blending electrospinning of core fluid was utilized as a control. Scanning electron microscopy demonstrated that both nanofibers F1 and F2 were linear. Transmission electron microscopy verified that nanofibers F2 featured a clear core-sheath nanostructure with a thin sheath layer about 25 nm, whereas their cores and nanofibers F1 were homogeneous KET-gliadin nanocomposites. X-ray diffraction patterns verified that, as a result of fine compatibility, KET was dispersed in gliadin in an amorphous state. In vitro dissolution tests demonstrated that the thin blank nanocoating in nanofibers F2 significantly modified drug release kinetics from a traditional exponential equation of nanofibers F1 to a zero-order controlled release model, linearly freeing 95.7 ± 4.7% of the loaded cargoes over a time period of 16 h.

  7. Electrospun Blank Nanocoating for Improved Sustained Release Profiles from Medicated Gliadin Nanofibers.

    Science.gov (United States)

    Liu, Xinkuan; Shao, Wenyi; Luo, Mingyi; Bian, Jiayin; Yu, Deng-Guang

    2018-03-22

    Nanomaterials providing sustained release profiles are highly desired for efficacious drug delivery. Advanced nanotechnologies are useful tools for creating elaborate nanostructure-based nanomaterials to achieve the designed functional performances. In this research, a modified coaxial electrospinning was explored to fabricate a novel core-sheath nanostructure (nanofibers F2), in which a sheath drug-free gliadin layer was successfully coated on the core ketoprofen (KET)-gliadin nanocomposite. A monolithic nanocomposite (nanofibers F1) that was generated through traditional blending electrospinning of core fluid was utilized as a control. Scanning electron microscopy demonstrated that both nanofibers F1 and F2 were linear. Transmission electron microscopy verified that nanofibers F2 featured a clear core-sheath nanostructure with a thin sheath layer about 25 nm, whereas their cores and nanofibers F1 were homogeneous KET-gliadin nanocomposites. X-ray diffraction patterns verified that, as a result of fine compatibility, KET was dispersed in gliadin in an amorphous state. In vitro dissolution tests demonstrated that the thin blank nanocoating in nanofibers F2 significantly modified drug release kinetics from a traditional exponential equation of nanofibers F1 to a zero-order controlled release model, linearly freeing 95.7 ± 4.7% of the loaded cargoes over a time period of 16 h.

  8. Mechanical Behaviour Investigation Of Aluminium Alloy Tailor Welded Blank Developed By Using Friction Stir Welding Technique

    Science.gov (United States)

    Dwi Anggono, Agus; Sugito, Bibit; Hariyanto, Agus; Subroto; Sarjito

    2017-10-01

    The objective on the research was to investigate the mechanical properties and microstructure of tailor welded blank (TWB) made from AA6061-T6 and AA1100 using friction stir welding (FSW) process. Due to the dissimilar mechanical properties of the two aluminium alloys, microhardness test was conducted to measure the hardness distribution across the weld nugget. The mixing of two distinct materials was influenced by tool rotation speed. Therefore, microstructure analysis was carried out to investigate the grain size and shape. The grain size of AA6061-T6 has increased in the heat affected zone (HAZ) while for AA1100 has decreased. In the weld nugget, it has found a hook defects in the dissimilar aluminium joining. By using monotonic tensile load, the different weld line direction was observed with the expansion in tool rotation. The joints failure were consistently on the area of AA1100 series. Furthermore, two specimens were investigated, one through the dissimilar aluminium and the other through similiar material. Inspection of the weld nugget hardness was shown that nonhomogen material intermixing during the stiring process as confirmed by microhardness measurement.

  9. A spectral blanking-out controller for demonstration of information barrier technology

    International Nuclear Information System (INIS)

    Liu Suping; Gong Jian; Hu Guangchun; Zhang Jianhua

    2006-01-01

    Information barrier technology has become more and more important in the R and D of radiation fingerprint verification associated with classified items such as nuclear warheads, nuclear components and military-used nuclear materials. The function of information barriers is two-fold: one is to prevent the classified information from leaking out; the other is to provide creditable verification. To fulfill these two functions, the information barriers for a viable verification system (including all its hardware and software) must be designed on the basic principles of protecting classified information and the ability to authenticate. The Spectral Blanking-out Controller (SBC) is developed to illustrate the two functions of the information barriers and to explore some practice measures to meet the required design fundamentals. This paper briefs the task assigned to the SBC, the specific design concerns and the practical information barrier measures. The R and D of the SBC embodies the concepts of information barrier technology and has to conform to the basic guidelines: If a verification system is expected to possess strict information barriers, the design of the system must be integrative with due considerations given to the factors such as the efficiency of the verification technique, the possible measures to protect the classified information from directly or indirectly leaking out, the complete openness in all aspects of the system for the inspectors to authenticate the system for the sake of achieving certain degree of confidence on the verification results. (authors)

  10. INIS: Authority List for Journal Titles

    International Nuclear Information System (INIS)

    1992-01-01

    This is the nineteenth revision of the INIS: Authority List for Journal Titles (IAEA-INIS-11). It lists 10,797 journal titles which have contained articles within the scope of INIS. The purpose of this Authority List is to provide descriptive cataloguers with a standard abbreviation for journal titles and to assist users of INIS products with a tool for verifying the full title of a journal. A journal, or periodical, is generally published within a defined, fixed interval between issues, which usually has more than one issue a year, and which usually includes a mixture of articles, letters, summaries, etc. Within this definition, annuals such as Annual Review of Nuclear Science are included. Series titles as, for example the McGraw-Hill Series in Nuclear Engineering, are not included in this Authority. Entries: Each entry consists of: - the full journal title (highlighted); - the abbreviated title; - ISSN, if available; - CODEN, if available; - additional information related to the journal title. Arrangement: In Part I, the full journal titles are grouped by country or international organization name and ordered alphabetically, followed by the ISSN, the CODEN in square brackets if available, and then the abbreviated title. The abbreviated title is based on the rules of ISO 4: Documentation - International Code for the Abbreviation of Titles of Periodicals. The abbreviations of the words are taken from the ISDS List of Periodical Title Word Abbreviation. In Part II, the order of the citations is reversed: the abbreviated journal titles are arranged alphabetically, followed by country code. Then the full journal titles are followed by the country of publication, and if available, ISSN and CODEN. Additional Information: There is important information related to the journal titles which are fundamental for tracing the history of the title and the present status. They are listed below and are entered whenever applicable: - Ceased publication; - Superseded by

  11. TRAVEL AND HOME LEAVE

    CERN Multimedia

    Human Resources Division

    2002-01-01

    Administrative procedures for : Travel to the home station and home leave (hl) Additional travel to the home station (at) Travel to the home station and home leave for family reasons (hlf) As part of the process of simplifying administrative procedures, HR and AS Divisions have devised a new, virtually automatic procedure for payment of travel expenses to the home station. The changes are aimed at rationalising administrative procedures and not at reducing benefits. The conditions of eligibility are unchanged. The new procedure, which will be operational with effect from 1st June 2002, will greatly simplify the administrative processing of claims for travel expenses and the recording of home leaves. Currently, requests for payment are introduced manually into the Advances and Claims system (AVCL) by divisional secretariats. All travel to the home station starting prior to 1st June 2002 will be processed according to the existing system whereas that starting on 1st June and after will be processed accordi...

  12. Discrimination-pregnancy leave-Pregnancy Discrimination Act not retroactive-bona fide seniority system. AT&T Corp. v. Hulteen, 2009 U.S. LEXIS 3470 (U.S. 5/18/2009).

    Science.gov (United States)

    2009-01-01

    A pension plan whose terms are those of a bona fide seniority system and which treats pregnancy leave, taken before the addition of the Pregnancy Discrimination Act (PDA) to Title VII, differently than other kinds of medical leave, does not amount to sex and pregnancy discrimination under Title VII because PDA does not apply retroactively.

  13. Does Leave Work?

    NARCIS (Netherlands)

    Heleen van Luijn; Saskia Keuzenkamp

    2004-01-01

    More and more people have to combine work and care responsibilities, and work part-time or use daycare and after-school care facilities to help them do so. The Work and Care Act, which came into force on 1 December 2001, combined all the existing schemes - such as parental and maternity leave -

  14. Maternity Leave in Taiwan

    Science.gov (United States)

    Feng, Joyce Yen; Han, Wen-Jui

    2010-01-01

    Using the first nationally representative birth cohort study in Taiwan, this paper examines the role that maternity leave policy in Taiwan plays in the timing of mothers returning to work after giving birth, as well as the extent to which this timing is linked to the amount of time mothers spend with their children and their use of breast milk…

  15. REMINDER: Saved Leave Scheme (SLS)

    CERN Multimedia

    2003-01-01

    Transfer of leave to saved leave accounts Under the provisions of the voluntary saved leave scheme (SLS), a maximum total of 10 days'* annual and compensatory leave (excluding saved leave accumulated in accordance with the provisions of Administrative Circular No 22B) can be transferred to the saved leave account at the end of the leave year (30 September). We remind you that unused leave of all those taking part in the saved leave scheme at the closure of the leave year accounts is transferred automatically to the saved leave account on that date. Therefore, staff members have no administrative steps to take. In addition, the transfer, which eliminates the risk of omitting to request leave transfers and rules out calculation errors in transfer requests, will be clearly shown in the list of leave transactions that can be consulted in EDH from October 2003 onwards. Furthermore, this automatic leave transfer optimizes staff members' chances of benefiting from a saved leave bonus provided that they ar...

  16. TITLE

    Directory of Open Access Journals (Sweden)

    Nisha K. M

    2016-01-01

    Full Text Available The new millennium is seen as an epoch of entrepreneurship with entrepreneurs perceiving novel opportunities, organizing resources, undertaking risks to pursue their goals in establishing innovative ventures for scaling new horizons. Women entrepreneurs have the potency to confront numerous challenges, such as creating equity, equilibrium, ensuring sustainable and inclusive socio economic development in divergent economies, by seizing tremendous business opportunities in the contemporary commercial world. Kerala, the southern State of India, is experiencing an economic renovation through technological transformation and, in particular, through the growth of women oriented Micro, Small and Medium Enterprises (MSMEs. The study aims to; identify the growth trends of women’s entrepreneurship in the micro enterprises of Kerala; examine whether women’s entrepreneurial activities significantly vary across the form of women owned enterprises, type of organization and nature of activity; and also explore the prospects and challenges faced by women entrepreneurs through micro entrepreneurial activities. Research methodology involves the application of descriptive quantitative analysis on the secondary data primarily collected from the database of Directorate of Industries and District Industries Centre for a period of 7 years extending from 2007-08 to 2013-14. Findings reveal that MSMEs spawn better income distribution, by operating in heterogeneous areas of the economy with limited capital and creating more employment opportunities, thereby reducing poverty and inequalities. The trend analysis reflects an escalation in the number of enterprises, investments, profits and employment opportunities generated especially through micro enterprises of women. They play a crucial role in the economy in terms of creating self employment and generating employment opportunities for others. A paradigm shift is seen in the role of women’s entrepreneurship in terms of innovation, attitudes, leadership qualities, competitiveness, entrepreneurial skill and absorbing new entrants to the job market, empowering marginalized women.

  17. TITLE

    Directory of Open Access Journals (Sweden)

    Abdolhamid Papzan

    2013-01-01

    Full Text Available This study investigated entrepreneurial intention among graduate students of USM Engineering Campus. Applying the Theory of Planned Behavior (TPB; Ajzen, we examined the empirical model of entrepreneurial intention determinants. Although research has been conducted in entrepreneurial intention, limited study has been done among Iranian graduate students who are studying abroad. This research aims to fill this gap using Entrepreneurial Intention Questionnaire (EIQ, version 3.1. Accordingly, a survey study was applied and Iranian graduate students of the USM Engineering Campus were studied using the census method. The authors propose an empirical model and tested its reliability and validity using structural equation modeling. Data was analyzed using Spss16 and Amos18 software. Results revealed that the level of knowledge about business sources of assistance for entrepreneurs in addition to components of the TPB, affected entrepreneurial intention. Empirical model ‘s goodness of fit indices indicated good model fit x2=1.047, df=2, probability 0.592; NFI= 0.981; CFI= 1.000; RMSEA=0.000. It seems that current empirical model could be a guide for future research on this important topic.

  18. Minimization of the blank values in the neutron activation analysis of biological samples considering the whole procedure

    International Nuclear Information System (INIS)

    Lux, F.; Bereznai, T.; Haeberlin, T.H.

    1986-01-01

    In our determination of trace element contents of animal tissue by neutron activation analysis in the course of structure-activity relationship studies on platinum containing cancer drugs and wound healing we have tried to minimize the blank values that are caused by different sources of contamination during surgery, sampling and the activation analysis procedure. The following topics have been investigated: the abrasions from scalpels made of stainless steel, titanium or quartz; the type of surgery; the homogenisation of the samples before irradiation by use of a ball milll; the surface contaminations of the quartz ampoules that pass into the digestion solution of the irradiated samples. The appropriate measures taken in order to reduce the blank values are described. The results of analyses performed under these conditions indicate the effectiveness of the given measures, especially shown by the low values obtained for the chromium contents of the analysed muscle samples. (author)

  19. 24 CFR 202.12 - Title II.

    Science.gov (United States)

    2010-04-01

    ... INSTITUTIONS AND MORTGAGEES Title I and Title II Specific Requirements § 202.12 Title II. (a) Tiered pricing—(1... rate up to two percentage points under the mortgagee's customary lending practices must be based on... after accounting for the value of servicing rights generated by making the loan and other income to the...

  20. Investigation of Hardness Change for Spot Welded Tailored Blank in Hot Stamping Using CCT and Deformation-CCT Diagrams

    Science.gov (United States)

    Yogo, Yasuhiro; Kurato, Nozomi; Iwata, Noritoshi

    2018-04-01

    When an outer panel of a B-pillar is manufactured with the hot stamping process, reinforcements are spot welded on its inner side. Before reinforcements are added, the microstructure of the outer panel is martensite. However, reheating during spot welding changes the martensite to ferrite, which has a lower hardness in the heat-affected zone than in other areas. If spot welding is conducted before hot stamping for making a spot welded tailored blank, the microstructure in the spot welded tailored blank after hot stamping is martensite. This sequence of processes avoids hardness reduction due to spot welding. In this study, the hardness and microstructure around spot welded parts of the tailored blank were investigated. The results clearly showed that areas close to the spot welded parts are severely stretched during hot stamping. In addition, stretching suppresses the martensitic phase transformation and reduces the hardness. To characterize this phenomenon, a simulation was conducted that considered the effects of pre-strain on the phase transformation. A continuous cooling transformation (CCT) diagram and a deformation continuous cooling transformation (DCCT) diagram were made in order to quantify the effect of the cooling rate and pre-strain on the phase transformation and hardness. The hardness was then calculated using the experimentally measured CCT and DCCT diagrams and the finite element analysis results. The calculated hardness was compared with the experimental hardness. Good agreement was found between the calculated and experimental results.

  1. Investigation of Hardness Change for Spot Welded Tailored Blank in Hot Stamping Using CCT and Deformation-CCT Diagrams

    Science.gov (United States)

    Yogo, Yasuhiro; Kurato, Nozomi; Iwata, Noritoshi

    2018-06-01

    When an outer panel of a B-pillar is manufactured with the hot stamping process, reinforcements are spot welded on its inner side. Before reinforcements are added, the microstructure of the outer panel is martensite. However, reheating during spot welding changes the martensite to ferrite, which has a lower hardness in the heat-affected zone than in other areas. If spot welding is conducted before hot stamping for making a spot welded tailored blank, the microstructure in the spot welded tailored blank after hot stamping is martensite. This sequence of processes avoids hardness reduction due to spot welding. In this study, the hardness and microstructure around spot welded parts of the tailored blank were investigated. The results clearly showed that areas close to the spot welded parts are severely stretched during hot stamping. In addition, stretching suppresses the martensitic phase transformation and reduces the hardness. To characterize this phenomenon, a simulation was conducted that considered the effects of pre-strain on the phase transformation. A continuous cooling transformation (CCT) diagram and a deformation continuous cooling transformation (DCCT) diagram were made in order to quantify the effect of the cooling rate and pre-strain on the phase transformation and hardness. The hardness was then calculated using the experimentally measured CCT and DCCT diagrams and the finite element analysis results. The calculated hardness was compared with the experimental hardness. Good agreement was found between the calculated and experimental results.

  2. 42 CFR 476.86 - Correlation of Title XI functions with Title XVIII functions.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Correlation of Title XI functions with Title XVIII functions. 476.86 Section 476.86 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF...) Qio Review Functions § 476.86 Correlation of Title XI functions with Title XVIII functions. (a...

  3. Employer Provisions for Parental Leave.

    Science.gov (United States)

    Meisenheimer, Joseph R., II

    1989-01-01

    Slightly more than one-third of full-time employees in medium and large firms in private industry were covered by maternity- or paternity-leave policies; days off were usually leave without pay. (Author)

  4. REMINDER Saved Leave Scheme (SLS) : Transfer of leave to saved leave accounts

    CERN Multimedia

    HR Division

    2002-01-01

    Under the provisions of the voluntary saved leave scheme (SLS), a maximum total of 10 days'*) annual and compensatory leave (excluding saved leave accumulated in accordance with the provisions of Administrative Circular No. 22B) can be transferred to the saved leave account at the end of the leave year (30 September). We remind you that, since last year, unused leave of all those taking part in the saved leave scheme at the closure of the leave-year accounts is transferred automatically to the saved leave account on that date. Therefore, staff members have no administrative steps to take. In addition, the transfer, which eliminates the risk of omitting to request leave transfers and rules out calculation errors in transfer requests, will be clearly shown in the list of leave transactions that can be consulted in EDH from October 2002 onwards. Furthermore, this automatic leave transfer optimizes staff members' chances of benefiting from a saved leave bonus provided that they are still participants in the schem...

  5. Saved Leave Scheme (SLS) : Simplified procedure for the transfer of leave to saved leave accounts

    CERN Multimedia

    HR Division

    2001-01-01

    As part of the process of streamlining procedures, the HR and AS Divisions have jointly developed a system whereby annual and compensatory leave will henceforth be automatically transferred1) to saved leave accounts. Under the provisions of the voluntary saved leave scheme (SLS), a maximum total of 10 days'2) annual and compensatory leave (excluding saved leave accumulated in accordance with the provisions of Administrative Circular No. 22 B) can be transferred to the saved leave account at the end of the leave year (30 September). Previously, every person taking part in the scheme has been individually issued with a form for the purposes of requesting the transfer of leave to the leave account and the transfer has then had to be done manually by HR Division. To streamline the procedure, unused leave of all those taking part in the saved leave scheme at the closure of of the leave-year accounts will henceforth be transferred automatically to the saved leave account on that date. This simplification is in the ...

  6. INIS: Authority list for journal titles

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-03-01

    This is the twenty-ninth revision of the INIS: Authority List for Journal Titles (IAEA-INIS-11). It lists the titles of 12 990 journals which have contained articles within the scope of INIS. The purpose of this report is to provide descriptive cataloguers with a standard entry for the full title of a journal. In addition to the full journal title, the ISSN (International Standard Serial Number), administered by the ISSN International Centre, Paris, France, and/or CODEN, assigned by Chemical Abstracts Service, USA, are given in this manual. In order to help the reader to find titles easily, the list is divided into two parts. In Part I, the full journal titles are grouped by country or international organization responsible for coverage and ordered alphabetically. In Part II, the full journal titles of all countries or international organizations are arranged alphabetically. The country name or the international organization name responsible for coverage of the journal title to INIS is entered in parentheses. Journal titles marked with an asterisk are regularly scanned by INIS. Titles that have been identified by INIS Centres as 'Key Journals' are marked with the hash sign.

  7. INIS: Authority list for journal titles

    International Nuclear Information System (INIS)

    2003-01-01

    This is the twenty-ninth revision of the INIS: Authority List for Journal Titles (IAEA-INIS-11). It lists the titles of 12 990 journals which have contained articles within the scope of INIS. The purpose of this report is to provide descriptive cataloguers with a standard entry for the full title of a journal. In addition to the full journal title, the ISSN (International Standard Serial Number), administered by the ISSN International Centre, Paris, France, and/or CODEN, assigned by Chemical Abstracts Service, USA, are given in this manual. In order to help the reader to find titles easily, the list is divided into two parts. In Part I, the full journal titles are grouped by country or international organization responsible for coverage and ordered alphabetically. In Part II, the full journal titles of all countries or international organizations are arranged alphabetically. The country name or the international organization name responsible for coverage of the journal title to INIS is entered in parentheses. Journal titles marked with an asterisk are regularly scanned by INIS. Titles that have been identified by INIS Centres as 'Key Journals' are marked with the hash sign

  8. Parental leave and child health.

    Science.gov (United States)

    Ruhm, C J

    2000-11-01

    This study investigates whether rights to parental leave improve pediatric health. Aggregate data are used for 16 European countries over the 1969 through 1994 period. More generous paid leave is found to reduce deaths of infants and young children. The magnitudes of the estimated effects are substantial, especially where a causal effect of leave is most plausible. In particular, there is a much stronger negative relationship between leave durations and post-neonatal or child fatalities than for perinatal mortality, neonatal deaths, or low birth weight. The evidence further suggests that parental leave may be a cost-effective method of bettering child health.

  9. The prevalence of sick leave

    DEFF Research Database (Denmark)

    Backhausen, Mette; Damm, Peter; Bendix, Jane

    2018-01-01

    of long-term sick leave. Method Data from 508 employed pregnant women seeking antenatal care was collected by questionnaires from August 2015 to March 2016. The questionnaires, which were filled in at 20 and 32 weeks of gestation, provided information on maternal characteristics, the number of days spent...... on sick leave and the associated reasons. Descriptive statistics and logistic regression analysis were applied. Results The prevalence of sick leave was 56% of employed pregnant women in the first 32 weeks of gestation and more than one in four reported long-term sick leave (>20 days, continuous...... was a negative predictor. Conclusions The prevalence of sick leave was 56% in the first 32 weeks of gestation and more than one in four women reported long-term sick leave. The majority of reasons for sick leave were pregnancy-related and low back pain was the most frequently given reason....

  10. Land Titles and Rice Production in Vietnam

    DEFF Research Database (Denmark)

    Van Den Broeck, Katleen; Newman, Carol; Tarp, Finn

    In most of the empirical literature on land titling, the household is regarded as unitary, and land rights are found to have ambiguous effects on land allocation, investment and productivity. Using data from 12 provinces in Vietnam, we diversify land titles, and show in a household fixed effects...... analysis of plot level rice yields that land titles are indeed important. Only exclusively held titles have the expected positive effects, and the positive effect on yields is found in male headed households. Furthermore, a household level rice yield function reveals that exclusive user rights...... are inefficiency decreasing, while jointly held user rights have no efficiency effects. Finally, once the gender of the head of household is controlled for, exclusively held female titles have a greater positive effect on the efficiency of the household than that of male held titles...

  11. Summary and evaluation of pesticides in field blanks collected for the National Water-Quality Assessment Program, 1992-95

    Science.gov (United States)

    Martin, Jeffrey D.; Gilliom, Robert J.; Schertz, Terry L.

    1999-01-01

    Field blanks are quality-control samples used to assess contamination in environmental water samples. Contamination is the unintentional introduction of a chemical (pesticides in this instance) into an environmental water sample from sources such as inadequately cleaned equipment, dirty hands, dust, rain, or fumes. Contamination causes a positive bias in analytical measurements that may need to be considered in the analysis and interpretation of the environmental data. Estimates of pesticide contamination in environmental water samples collected for the National Water-Quality Assessment (NAWQA) Program are used to qualify, where needed, interpretations of the occurrence and distribution of pesticides in the surface and ground waters of the United States.

  12. A novel feedback control system – Controlling the material flow in deep drawing using distributed blank-holder force

    DEFF Research Database (Denmark)

    Endelt, Benny Ørtoft; Tommerup, Søren; Danckert, Joachim

    2013-01-01

    The performance of a feedback control system is often limited by the quality of the model on which it is based, and often the controller design is based on trial and error due to insufficient modeling capabilities. A framework is proposed where the controller design is based on classical state...... on a deep drawing operation where the objective was to control material flow throughout the part using only spatial information regarding flange draw-in. The control system controls both the magnitude and distribution of the blank-holder force. The methodology proved stable and flexible with respect...

  13. Review of Trace-Element Field-Blank Data Collected for the California Groundwater Ambient Monitoring and Assessment (GAMA) Program, May 2004-January 2008

    Science.gov (United States)

    Olsen, Lisa D.; Fram, Miranda S.; Belitz, Kenneth

    2010-01-01

    Trace-element quality-control samples (for example, source-solution blanks, field blanks, and field replicates) were collected as part of a statewide investigation of groundwater quality in California, known as the Priority Basins Project of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The GAMA Priority Basins Project is being conducted by the U.S. Geological Survey (USGS) in cooperation with the California State Water Resources Control Board (SWRCB) to assess and monitor the quality of groundwater resources used for drinking-water supply and to improve public knowledge of groundwater quality in California. Trace-element field blanks were collected to evaluate potential bias in the corresponding environmental data. Bias in the environmental data could result from contamination in the field during sample collection, from the groundwater coming into contact with contaminants on equipment surfaces or from other sources, or from processing, shipping, or analyzing the samples. Bias affects the interpretation of environmental data, particularly if any constituents are present solely as a result of extrinsic contamination that would have otherwise been absent from the groundwater that was sampled. Field blanks were collected, analyzed, and reviewed to identify and quantify extrinsic contamination bias. Data derived from source-solution blanks and laboratory quality-control samples also were considered in evaluating potential contamination bias. Eighty-six field-blank samples collected from May 2004 to January 2008 were analyzed for the concentrations of 25 trace elements. Results from these field blanks were used to interpret the data for the 816 samples of untreated groundwater collected over the same period. Constituents analyzed were aluminum (Al), antimony (Sb), arsenic (As), barium (Ba), beryllium (Be), boron (B), cadmium (Cd), chromium (Cr), cobalt (Co), copper (Cu), iron (Fe), lead (Pb), lithium (Li), manganese (Mn), mercury (Hg), molybdenum

  14. Paid Family Leave, Fathers' Leave-Taking, and Leave-Sharing in Dual-Earner Households

    OpenAIRE

    Bartel, Ann P.; Rossin-Slater, Maya; Ruhm, Christopher J.; Stearns, Jenna; Waldfogel, Jane

    2015-01-01

    This paper provides quasi-experimental evidence on the impact of paid leave legislation on fathers' leave-taking, as well as on the division of leave between mothers and fathers in dual-earner households. Using difference-in-difference and difference-in-difference-in-difference designs, we study California's Paid Family Leave (CA-PFL) program, which is the first source of government-provided paid parental leave available to fathers in the United States. Our results show that fathers in Califo...

  15. 24 CFR 200.61 - Title.

    Science.gov (United States)

    2010-04-01

    ... Commissioner. (c) Endorsement of the credit instrument for insurance shall evidence the acceptability of title... GENERAL INTRODUCTION TO FHA PROGRAMS Requirements for Application, Commitment, and Endorsement Generally...

  16. Paid Family Leave, Fathers' Leave-Taking, and Leave-Sharing in Dual-Earner Households.

    Science.gov (United States)

    Bartel, Anne P; Rossin-Slater, Maya; Ruhm, Christopher J; Stearns, Jenna; Waldfogel, Jane

    Using difference-in-difference and difference-in-difference-in-difference designs, we study California's Paid Family Leave (CA-PFL) program, the first source of government-provided paid parental leave available to fathers in the Unites States. Relative to the pre-treatment mean, fathers of infants in California are 46 percent more likely to be on leave when CA-PFL is available. In households where both parents work, we find suggestive evidence that CA-PFL increases both father-only leave-taking (i.e., father on leave while mother is at work) and joint leave-taking (i.e., both parents on leave at the same time). Effects are larger for fathers of first-born children than for fathers of later-born children.

  17. 76 FR 18254 - Proposed Information Collection Request (ICR) for the Family Medical Leave Act (FMLA) Employee...

    Science.gov (United States)

    2011-04-01

    ... WHD to determine how those policies affect the work-life balance of workers and the productivity and work flow of employers. The study enables DOL to shape future regulatory options, craft interpretive... Family and Medical Leave. The final report on this survey, titled ``A Workable Balance: Report to...

  18. Comparing the characteristics of highly cited titles and highly alted titles

    Energy Technology Data Exchange (ETDEWEB)

    Didegah, F.; Bowman, T.D.; Bowman, S.; Hartley, J.

    2016-07-01

    This study examines differences in the types of titles for articles that show high altmetric activity (highly alted articles) versus highly cited articles. This work expands on previous research on document titles in combination with a grounded theory approach to develop a codebook in which articles were manually coded based on 11 characteristics. The results show that there are differences and similarities in titles across many of the examined characteristics; highly cited titles and highly mentioned titles on Wikipedia have some similar characteristics such as they have the the highest percentage of substantive words; in addition, there are no or very few titles referencing outside or with humor/lightness on both platforms. Twitter and Facebook also showed some similarities having the highest percentage of humorous/light titles and lowest percentage of substantive words in their titles. (Author)

  19. Getting to one from title 10 + title 32 unity of effort in the homeland

    OpenAIRE

    Prosch, Caroline Ross.

    2011-01-01

    CHDS State/Local Approved for public release; distribution is unlimited This thesis bridges the knowledge gap between Title 10 Active Duty and Title 32 National Guard in order to breakdown cultural barriers and reach unity of effort for response operations in the homeland. Regrettably, a unified response was missing among Title 10 Active Duty and Title 32 National Guard members following Hurricane Katrina. Since then, initiatives based in doctrine, statutes and formal recommendations...

  20. BLANK SHAPE OPTIMIZATION ON DEEP DRAWING OF A TWIN ELLIPTICAL CUP USING THE REDUCED BASIS TECHNIQUE METHOD

    Directory of Open Access Journals (Sweden)

    Mahdi Hasanzadeh Golshani

    2015-08-01

    Full Text Available In this project thesis, initial blank shape optimization of a twin elliptical cup to reduce earring phenomenon in anisotropic sheet deep drawing process was studied .The purpose of this study is optimization of initial blank for reduction of the ears height value. The optimization process carried out using finite element method approach, which is coupled with Taguchi design of experiments and reduced basis technique methods. The deep drawing process was simulated in FEM software ABAQUS 6.12. The results of optimization show earring height and, in addition, a number of design variables and time of process can be reduced by using this methods. After optimization process with the proposed method, the maximum reduction of the earring height would be from 21.08 mm to 0.07 mm and also it could be reduced to 0 in some of the directions. The proposed optimization design in this article allows the designers to select the practical basis shapes. This leads to obtain better results at the end of the optimization process, to reduce design variables, and also to prevent repeating the optimization steps for indirect shapes.

  1. Design study of the geometry of the blanking tool to predict the burr formation of Zircaloy-4 sheet

    Energy Technology Data Exchange (ETDEWEB)

    Ha, Jisun, E-mail: nskim@sogang.ac.kr; Lee, Hyungyil, E-mail: nskim@sogang.ac.kr; Kim, Dongchul, E-mail: nskim@sogang.ac.kr; Kim, Naksoo, E-mail: nskim@sogang.ac.kr [Sogang University, Department of Mechanical Engineering, Seoul, 121-742 (Korea, Republic of)

    2013-12-16

    In this work, we investigated factors that influence burr formation for zircaloy-4 sheet used for spacer grids of nuclear fuel roads. Factors we considered are geometric factors of punch. We changed clearance and velocity in order to consider the failure parameters, and we changed shearing angle and corner radius of L-shaped punch in order to consider geometric factors of punch. First, we carried out blanking test with failure parameter of GTN model using L-shaped punch. The tendency of failure parameters and geometric factors that affect burr formation by analyzing sheared edges is investigated. Consequently, geometric factor's influencing on the burr formation is also high as failure parameters. Then, the sheared edges and burr formation with failure parameters and geometric factors is investigated using FE analysis model. As a result of analyzing sheared edges with the variables, we checked geometric factors more affect burr formation than failure parameters. To check the reliability of the FE model, the blanking force and the sheared edges obtained from experiments are compared with the computations considering heat transfer.

  2. [Precautionary maternity leave in Tirol].

    Science.gov (United States)

    Ludescher, K; Baumgartner, E; Roner, A; Brezinka, C

    1998-01-01

    Under Austrian law, precautionary maternity leave is a decree issued by the district public health physician. It forbids a pregnant woman to work and mandates immediate maternity leave. Regular maternity leave for all women employed in all jobs begins at 32 weeks of gestation. Women who work in workplaces deemed dangerous and women with a history of obstetric problems such as premature or growth-retarded babies from previous pregnancies are regularly 'sent' into precautionary maternity leave. The public health physicians of Tirol's nine administrative districts were interviewed and supplied data on precautionary maternity leave from their districts. In 100 women who attended the clinic for pregnancies at risk of the Obstetrics/Gynecology Department of Innsbruck University Hospital and who had already obtained precautionary maternity leave, the medical/administrative procedure was studied in each case and correlated with pregnancy outcome. The town district of Innsbruck and the district that comprises the suburbs of the provincial capital had the highest rates of precautionary maternity leave. The town district of Innsbruck had a rate of 24.3% of all pregnant women (employed and not employed) in precautionary maternity leave in 1997, whereas the whole province of Tirol had 13.4%. More than 80% of decrees for precautionary maternity leave are issued by district public health physicians on the basis of written recommendations from gynecologists. One third of women who are sent into precautionary maternity leave are issued the decree prior to 12 weeks of gestation - mostly cases of multiple pregnancies and women with previous miscarriages. The present system of precautionary maternity leave appears to work in the sense that most working pregnant women with risk factors are correctly identified - with most errors on the side of caution. As the system also helps employers - the employee's pay is paid from the federal family support fund and state insurance once she is in

  3. How property title impacts urban consolidation

    DEFF Research Database (Denmark)

    Easthope, Hazel; Warnken, Jan; Sherry, Cathy

    2014-01-01

    Continuing urbanisation is triggering an increase in multi-titled housing internationally. This trend has given rise to a substantial research interest in the social consequences of higher density living. Little enquiry, however, has been directed to examining how property title subdivisions gene...

  4. 31 CFR 505.01 - Short title.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Short title. 505.01 Section 505.01 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN... CERTAIN MERCHANDISE BETWEEN FOREIGN COUNTRIES § 505.01 Short title. The regulations in this part may be...

  5. 33 CFR 401.1 - Short title.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Short title. 401.1 Section 401.1 Navigation and Navigable Waters SAINT LAWRENCE SEAWAY DEVELOPMENT CORPORATION, DEPARTMENT OF TRANSPORTATION SEAWAY REGULATIONS AND RULES Regulations § 401.1 Short title. These regulations may be cited as the...

  6. 18 CFR 415.1 - Short title.

    Science.gov (United States)

    2010-04-01

    ... 18 Conservation of Power and Water Resources 2 2010-04-01 2010-04-01 false Short title. 415.1 Section 415.1 Conservation of Power and Water Resources DELAWARE RIVER BASIN COMMISSION ADMINISTRATIVE MANUAL BASIN REGULATIONS-FLOOD PLAIN REGULATIONS Generally § 415.1 Short title. This part shall be known...

  7. 25 CFR 151.13 - Title examination.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Title examination. 151.13 Section 151.13 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER LAND ACQUISITIONS § 151.13 Title examination. If the Secretary determines that he will approve a request for the acquisition of land from...

  8. Student Achievement in Title I Schools

    Science.gov (United States)

    Diaz, Abby T.

    2017-01-01

    This researcher seeks to answer the following question: How did two elementary Title I schools, identified as "high performing" on the first Smarter Balanced assessment, address elements of Maslow's hierarchy of needs when developing school-wide initiatives to enhance student achievement? Many students in Title I schools face barriers to…

  9. Land Titles and Rice Production in Vietnam

    DEFF Research Database (Denmark)

    Van Den Broeck, Katleen; Newman, Carol; Tarp, Finn

    analysis of plot level rice yields that land titles are indeed important. Only exclusively held titles have the expected positive effects, and the positive effect on yields is found in male headed households. Furthermore, a household level rice yield function reveals that exclusive user rights...

  10. 24 CFR 202.11 - Title I.

    Science.gov (United States)

    2010-04-01

    ... in 24 CFR 25.5. Civil money penalties may be imposed against Title I lenders and mortgagees pursuant... unacceptable risk to the Department; or (iv) Transfer of a Title I loan to a party that does not have a valid...

  11. Parental Leave Policies and Parents' Employment and Leave-Taking

    Science.gov (United States)

    Han, Wen-Jui; Ruhm, Christopher; Waldfogel, Jane

    2009-01-01

    We describe trends in maternal employment and leave-taking after birth of a newborn and analyze the extent to which these behaviors are influenced by parental leave policies. Data are from the June Current Population Survey (CPS) Fertility Supplements, merged with other months of the CPS, and cover the period 1987 to 1994. This time span is one…

  12. REMINDER Saved Leave Scheme (SLS) : Simplified procedure for the transfer of leave to saved leave accounts

    CERN Multimedia

    HR Division

    2001-01-01

    As part of the process of streamlining procedures, the HR and AS Divisions have jointly developed a system whereby annual and compensatory leave will henceforth be automatically transferred1) to saved leave accounts. Under the provisions of the voluntary saved leave scheme (SLS), a maximum total of 10 days'2)Previously, every person taking part in the scheme has been individually issued with a form for the purposes of requesting the transfer of leave to the leave account and the transfer has then had to be done manually by HR Division. To streamline the procedure, unused leave of all those taking part in the saved leave scheme at the closure of the leave-year accounts will henceforth be transferred automatically to the saved leave account on that date. This simplification is in the interest of all parties concerned. This automatic transfer procedure has a number of advantages for participants in the SLS scheme. First, staff members will no longer have to take any administrative steps. Secondly, the new proced...

  13. 24 CFR 203.385 - Types of satisfactory title evidence.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Types of satisfactory title... Title Waivers § 203.385 Types of satisfactory title evidence. The following types of title evidence shall be satisfactory to the Commissioner: (a) Fee or owner's title policy. A fee or owner's policy of...

  14. Quarterly title list for the period ending June 1980

    International Nuclear Information System (INIS)

    1980-01-01

    The title list contains: a) 17 titles and abstracts of laboratory reports, b) 36 titles of publications (32 with abstracts), c) 13 titles of articles submitted for publication (12 with abstracts), and d) 72 titles of lectures (52 with abstracts.) (GG) [de

  15. Negotiating leave in the workplace

    DEFF Research Database (Denmark)

    Bloksgaard, Lotte

    In Denmark leave entitlement is not only regulated by law but is also part of the various collective agreements established in the respective occupational sectors and at the local workplace level. Consequently, Danish fathers have very different leave entitlements, depending on the sector, branch...

  16. Negotiating leave in the workplace

    DEFF Research Database (Denmark)

    Bloksgaard, Lotte

    2014-01-01

    In Denmark leave entitlement is not only regulated by law but is also part of the various collective agreements established in the respective occupational sectors and at the local workplace level. Consequently, Danish fathers have very different leave entitlements, depending on the sector, branch...

  17. A coupled analysis of fluid flow, heat transfer and deformation behavior of solidifying shell in continuously cast beam blank

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jung Eui; Yeo, Tae Jung; Oh, Kyu Hwan; Yoon, Jong Kyu [School of Materials Science and Engineering, Seoul Nat` l Univ., Seoul (Korea, Republic of); Han, Heung Nam [Oxford Center for Advanced Materials and Composites, Department of Materials, Univ. of Oxford (United Kingdom)

    1998-12-31

    A mathematical model for a coupled analysis of fluid flow, heat transfer and deformation behavior in the continuously cast beam blank has been developed. The fluid flow, heat transfer and solidification in the mold region were analyzed with 3-dimensional finite difference method (FDM) based on control volume method. A body fitted coordinate system was introduced for the complex geometry of the beam blank. The effects of turbulence and natural convection of molten steel were taken into account in determining the fluid flow in the strand. The thermo-elasto-plastic deformation behavior in the cast strand and the formation of air gap between the solidifying shell and the mold were analyzed by the finite element method (FEM) using the 2-dimensional slice temperature profile calculated by the FDM. The heat flow between the strand and the mold was evaluated by the coupled analysis between the fluid flow-heat transfer analysis and the thermo-elasto-plastic stress analysis. In order to determine the solid fraction in the mushy zone, the microsegregation of solute element was assessed. The effects of fluid flow on the heat transfer, the solidification of steel and the distribution of shell thickness during the casting of the beam blank were simulated. The deformation behavior of the solidifying shell and the possibility of cracking of the strand were also investigated. The recirculating flows were developed in the regions of the web and the flange tip. The impinging of the inlet flow from the nozzle retarded the growing of solidifying shell in the regions of the fillet and the flange. The air gap between the strand and the mold was formed near the region of the corner of the flange tip. At the initial stage of casting, the probability of the surface cracking was high in the regions of the fillet and the flange tip. After the middle stage of casting, the internal cracking was predicted in the regions of the flange tip, and between the fillet and the flange tip. (author) 38

  18. A coupled analysis of fluid flow, heat transfer and deformation behavior of solidifying shell in continuously cast beam blank

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jung Eui; Yeo, Tae Jung; Oh, Kyu Hwan; Yoon, Jong Kyu [School of Materials Science and Engineering, Seoul Nat`l Univ., Seoul (Korea, Republic of); Han, Heung Nam [Oxford Center for Advanced Materials and Composites, Department of Materials, Univ. of Oxford (United Kingdom)

    1997-12-31

    A mathematical model for a coupled analysis of fluid flow, heat transfer and deformation behavior in the continuously cast beam blank has been developed. The fluid flow, heat transfer and solidification in the mold region were analyzed with 3-dimensional finite difference method (FDM) based on control volume method. A body fitted coordinate system was introduced for the complex geometry of the beam blank. The effects of turbulence and natural convection of molten steel were taken into account in determining the fluid flow in the strand. The thermo-elasto-plastic deformation behavior in the cast strand and the formation of air gap between the solidifying shell and the mold were analyzed by the finite element method (FEM) using the 2-dimensional slice temperature profile calculated by the FDM. The heat flow between the strand and the mold was evaluated by the coupled analysis between the fluid flow-heat transfer analysis and the thermo-elasto-plastic stress analysis. In order to determine the solid fraction in the mushy zone, the microsegregation of solute element was assessed. The effects of fluid flow on the heat transfer, the solidification of steel and the distribution of shell thickness during the casting of the beam blank were simulated. The deformation behavior of the solidifying shell and the possibility of cracking of the strand were also investigated. The recirculating flows were developed in the regions of the web and the flange tip. The impinging of the inlet flow from the nozzle retarded the growing of solidifying shell in the regions of the fillet and the flange. The air gap between the strand and the mold was formed near the region of the corner of the flange tip. At the initial stage of casting, the probability of the surface cracking was high in the regions of the fillet and the flange tip. After the middle stage of casting, the internal cracking was predicted in the regions of the flange tip, and between the fillet and the flange tip. (author) 38

  19. 5 CFR 630.1204 - Intermittent leave or reduced leave schedule.

    Science.gov (United States)

    2010-01-01

    ... insurance, health benefits, retirement coverage, and leave accrual). (e) The agency shall determine the... REGULATIONS ABSENCE AND LEAVE Family and Medical Leave § 630.1204 Intermittent leave or reduced leave schedule... reduced leave schedule unless the employee and the agency agree to do so. (b) Leave under § 630.1203(a) (3...

  20. INIS: Authority list for journal titles

    International Nuclear Information System (INIS)

    2005-01-01

    This is the 31st revision of the INIS: Authority List for Journal Titles (IAEA-INIS-11). This list is published annually and includes the titles of all journals which have contained articles submitted to INIS at the time of publication. The current list contains 13,104 journal titles, 2,078 regularly scanned journals and 561 key journals. It was last updated in February 2005. The purpose of this report is to provide descriptive cataloguers with a standard entry for the full title of a journal. In addition to the full journal title, the ISSN (International Standard Serial Number), administered by the ISSN International Centre, Paris, France, and/or CODEN, assigned by Chemical Abstracts Service, USA, are given in this manual. In order to help the user find titles easily, the list is arranged in six parts, followed by summary statistics: In Part I, all key journals are grouped under the name of the country or international organization responsible for their input in INIS, then sorted alphabetically under their title. In Part II, all key journals are sorted alphabetically under their title. The name of the country or international organization responsible for their input in INIS is entered in parentheses within the body of the entry. In Part III, all journals that are regularly scanned by INIS Centers are grouped under the name of the country or international organization responsible for their input in INIS, then sorted alphabetically under their title. In Part IV, all journals that are regularly scanned by INIS Centers are sorted alphabetically under their title. The name of the country or international organization responsible for their input in INIS is entered in parentheses within the body of the entry. In Part V, all journals are grouped under the name of the country or international organization responsible for their input in INIS, then sorted alphabetically under their title. In Part VI, all journals are sorted alphabetically under their title. The name of the

  1. INIS: Authority list for journal titles

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-03-01

    This is the 31st revision of the INIS: Authority List for Journal Titles (IAEA-INIS-11). This list is published annually and includes the titles of all journals which have contained articles submitted to INIS at the time of publication. The current list contains 13,104 journal titles, 2,078 regularly scanned journals and 561 key journals. It was last updated in February 2005. The purpose of this report is to provide descriptive cataloguers with a standard entry for the full title of a journal. In addition to the full journal title, the ISSN (International Standard Serial Number), administered by the ISSN International Centre, Paris, France, and/or CODEN, assigned by Chemical Abstracts Service, USA, are given in this manual. In order to help the user find titles easily, the list is arranged in six parts, followed by summary statistics: In Part I, all key journals are grouped under the name of the country or international organization responsible for their input in INIS, then sorted alphabetically under their title. In Part II, all key journals are sorted alphabetically under their title. The name of the country or international organization responsible for their input in INIS is entered in parentheses within the body of the entry. In Part III, all journals that are regularly scanned by INIS Centers are grouped under the name of the country or international organization responsible for their input in INIS, then sorted alphabetically under their title. In Part IV, all journals that are regularly scanned by INIS Centers are sorted alphabetically under their title. The name of the country or international organization responsible for their input in INIS is entered in parentheses within the body of the entry. In Part V, all journals are grouped under the name of the country or international organization responsible for their input in INIS, then sorted alphabetically under their title. In Part VI, all journals are sorted alphabetically under their title. The name of the

  2. INIS: Authority list for journal titles

    International Nuclear Information System (INIS)

    2006-01-01

    This is the 32nd revision of the INIS: Authority List for Journal Titles (IAEA-INIS-11). This list is published annually and includes the titles of all journals which have contained articles submitted to INIS at the time of publication. The current list contains 13,231 journal titles, 2,125 regularly scanned journals and 555 key journals. It was last updated in February 2006. The purpose of this report is to provide descriptive cataloguers with a standard entry for the full title of a journal. In addition to the full journal title, the ISSN (International Standard Serial Number), administered by the ISSN International Centre, Paris, France, and/or CODEN, assigned by Chemical Abstracts Service, USA, are given in this manual. In order to help the user find titles easily, the list is arranged in six parts, followed by summary statistics: In Part I, all key journals are grouped under the name of the country or international organization responsible for their input in INIS, then sorted alphabetically under their title. In Part II, all key journals are sorted alphabetically under their title. The name of the country or international organization responsible for their input in INIS is entered in parentheses within the body of the entry. In Part III, all journals that are regularly scanned by INIS Centres are grouped under the name of the country or international organization responsible for their input in INIS, then sorted alphabetically under their title. In Part IV, all journals that are regularly scanned by INIS Centres are sorted alphabetically under their title. The name of the country or international organization responsible for their input in INIS is entered in parentheses within the body of the entry. In Part V, all journals are grouped under the name of the country or international organization responsible for their input in INIS, then sorted alphabetically under their title. In Part VI, all journals are sorted alphabetically under their title. The name of the

  3. ULE design considerations for a 3m class light weighted mirror blank for E-ELT M5

    Science.gov (United States)

    Fox, Andrew; Hobbs, Tom; Edwards, Mary; Arnold, Matthew; Sawyer, Kent

    2016-07-01

    It is expected that the next generation of large ground based astronomical telescopes will need large fast-steering/tip-tilt mirrors made of ultra-lightweight construction. These fast-steering mirrors are used to continuously correct for atmospheric disturbances and telescope vibrations. An example of this is the European Extremely Large Telescope (E-ELT) M5 lightweight mirror, which is part of the Tip-Tilt/Field-Stabilization Unit. The baseline design for the E-ELT M5 mirror, as presented in the E-ELT Construction Proposal, is a closed-back ULE mirror with a lightweight core using square core cells. Corning Incorporated (Corning) has a long history of manufacturing lightweight mirror blanks using ULE in a closed-back construction, going back to the 1960's, and includes the Hubble Space Telescope primary mirror, Subaru Telescope secondary and tertiary mirrors, the Magellan I and II tertiary mirrors, and Kepler Space Telescope primary mirror, among many others. A parametric study of 1-meter class lightweight mirror designs showed that Corning's capability to seal a continuous back sheet to a light-weighted core structure provides superior mirror rigidity, in a near-zero thermal expansion material, relative to other existing technologies in this design space. Corning has investigated the parametric performance of several design characteristics for a 3-meter class lightweight mirror blank for the E-ELT M5. Finite Element Analysis was performed on several design scenarios to obtain weight, areal density, and first Eigen frequency. This paper presents an overview of Corning ULE and lightweight mirror manufacturing capabilities, the parametric performance of design characteristics for 1-meter class and 3-meter class lightweight mirrors, as well as the manufacturing advantages and disadvantages of those characteristics.

  4. 20 CFR 404.535 - How much will we withhold from your title VIII and title XVI benefits to recover a title II...

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false How much will we withhold from your title... Officer § 404.535 How much will we withhold from your title VIII and title XVI benefits to recover a title II overpayment? (a) If past-due benefits are payable to you, we will withhold the lesser of the...

  5. Leaving surgical training: some of the reasons are in surgery.

    Science.gov (United States)

    Forel, Deanne; Vandepeer, Meegan; Duncan, Joanna; Tivey, David R; Tobin, Stephen A

    2018-05-01

    In 2014, the Royal Australasian College of Surgeons identified, through internal analysis, a considerable attrition rate within its Surgical Education and Training programme. Within the attrition cohort, choosing to leave accounted for the majority. Women were significantly over-represented. It was considered important to study these 'leavers' if possible. An external group with medical education expertise were engaged to do this, a report that is now published and titled 'A study exploring the reasons for and experiences of leaving surgical training'. During this time, the Royal Australasian College of Surgeons came under serious external review, leading to the development of the Action Plan on Discrimination, Bullying and Sexual Harassment in the Practice of Surgery, known as the Building Respect, Improving Patient Safety (BRIPS) action plan. The 'Leaving Training Report', which involved nearly one-half of all voluntary 'leavers', identified three major themes that were pertinent to leaving surgical training. Of these, one was about surgery itself: the complexity, the technical, decision-making and lifestyle demands, the emotional aspects of dealing with seriously sick patients and the personal toll of all of this. This narrative literature review investigates these aspects of surgical education from the trainees' perspective. © 2018 Royal Australasian College of Surgeons.

  6. 12 CFR 5.42 - Corporate title.

    Science.gov (United States)

    2010-01-01

    ... 18 U.S.C. 709, regarding false advertising and the misuse of names to indicate a Federal agency, and... the appropriate district office if it changes its corporate title. The notice must contain the old and...

  7. Code of Federal Regulations Title 21

    Data.gov (United States)

    U.S. Department of Health & Human Services — This database contains the most recent revision from the Government Printing Office (GPO) of the Code of Federal Regulations (CFR) Title 21 - Food and Drugs.

  8. The Need for Conciliation under Title VII

    Science.gov (United States)

    Pollard, William E.

    1975-01-01

    The AFL-CIO is committed to the task of eliminating discrimination and injustice in the workplace and is making efforts to expand the Equal Employment Opportunity Commission's conciliation efforts under Title Seven. (MW)

  9. Service Locator - Family Planning Title X

    Data.gov (United States)

    U.S. Department of Health & Human Services — This locator tool will help you find Title X family planning centers that provide high quality and cost-effective family planning and related preventive health...

  10. New statement of leave format

    CERN Multimedia

    HR Department

    2009-01-01

    Following the communication of the Standing Concertation Committee published in Weekly Bulletin No. 18-19 of 27 April 2009, the current statement of leave on monthly pay slips has been replaced with the EDH Leave Transactions report that displays the up-to-date situation of individual leave balances at all times. The report is available on EDH. Additionally, the layout of the pay slip has been modernised. The new version of the pay slip will be send out from September 2009 onwards. Finance and Purchasing Department, Personnel Accounting Human Resources Department, Organisation and Procedures General Infrastructure Services Department, Administrative Information Services

  11. Leaves of Absence. School Law Summary.

    Science.gov (United States)

    National Education Association, Washington, DC. Research Div.

    This report contains State-by-State statutory summaries on three types of leaves of absence relating to teachers -- sick leave, maternity leave, and sabbatical leave. Only State laws that have specific reference to one of these three types of leaves of absence are included. Not included are those statutes granting boards of education the general…

  12. INIS: Authority list for journal titles

    International Nuclear Information System (INIS)

    2008-01-01

    This is the 34th revision of the INIS: Authority List for Journal Titles (IAEA-INIS-11). This list is published annually and includes the titles of all journals which have contained articles submitted to INIS at the time of publication. The current list contains 13 538 journal titles, 2 106 regularly scanned journals and 613 key journals. It was last updated in February 2008. A journal - or periodical - is a continuing publication issued in a succession of discrete parts, usually bearing numbering and/or chronological designations and intended to be continued indefinitely. It is generally published within a defined, fixed interval between issues and normally appears more than once per year. It includes a mixture of articles, letters, summaries, etc. Within this definition, annuals such as the Annual Review of Nuclear Science are included, but series titles such as the McGraw-Hill Series in Nuclear Engineering are not. The purpose of this document is to provide descriptive cataloguers with standard elements to include in bibliographic level 'S' of the INIS record. These elements include field (tag) 229 (Full Journal Title), 320 (ISSN) and 321 (CODEN). The full journal title is mandatory, and either the ISSN or the CODEN must be included (both may appear). Instructions on how to use this and other elements of the INIS record format are found in INIS: Guide to Bibliographic Description (IAEA-INIS-1). In order to help the user find titles easily, the list is arranged in six parts, followed by summary statistics: - In Part I, all key journals are grouped under the name of the country or international organization responsible for their input in INIS, then sorted alphabetically under their title. - In Part II, all key journals are sorted alphabetically under their title. The name of the country or international organization responsible for their input in INIS is entered in parentheses within the body of the entry. - In Part III, all journals that are regularly scanned by

  13. INIS: Authority list for journal titles

    International Nuclear Information System (INIS)

    2009-01-01

    This is the 35th revision of the INIS: Authority List for Journal Titles (IAEA-INIS-11). This list is published annually and includes the titles of all journals which have contained articles submitted to INIS at the time of publication. The current list contains 13 750 journal titles, 1 965 regularly scanned journals and 593 key journals. It was last updated in March 2009. A journal - or periodical - is a continuing publication issued in a succession of discrete parts, usually bearing numbering and/or chronological designations and intended to be continued indefinitely. It is generally published within a defined, fixed interval between issues and normally appears more than once per year. It includes a mixture of articles, letters, summaries, etc. Within this definition, annuals such as the Annual Review of Nuclear Science are included, but series titles such as the McGraw-Hill Series in Nuclear Engineering are not. The purpose of this document is to provide descriptive cataloguers with standard elements to include in bibliographic level 'S' of the INIS record. These elements include field (tag) 229 (Full Journal Title), 320 (ISSN) and 321 (CODEN). The full journal title is mandatory, and either the ISSN or the CODEN must be included (both may appear). Instructions on how to use this and other elements of the INIS record format are found in INIS: Guide to Bibliographic Description (IAEA-INIS-1). In order to help the user find titles easily, the list is arranged in six parts, followed by summary statistics: - In Part I, all key journals are grouped under the name of the country or international organization responsible for their input in INIS, then sorted alphabetically under their title. - In Part II, all key journals are sorted alphabetically under their title. The name of the country or international organization responsible for their input in INIS is entered in parentheses within the body of the entry. - In Part III, all journals that are regularly scanned by the

  14. INIS: Authority list for journal titles

    International Nuclear Information System (INIS)

    2007-01-01

    This is the 33rd revision of the INIS: Authority List for Journal Titles (IAEA-INIS-11). This list is published annually and includes the titles of all journals which have contained articles submitted to INIS at the time of publication. The current list contains 13 396 journal titles, 2 170 regularly scanned journals and 578 key journals. It was last updated in February 2007. A journal - or periodical - is a continuing publication issued in a succession of discrete parts, usually bearing numbering and/or chronological designations and intended to be continued indefinitely. It is generally published within a defined, fixed interval between issues and normally appears more than once per year. It includes a mixture of articles, letters, summaries, etc. Within this definition, annuals such as the Annual Review of Nuclear Science are included, but series titles such as the McGraw-Hill Series in Nuclear Engineering are not. The purpose of this document is to provide descriptive cataloguers with standard elements to include in bibliographic level 'S' of the INIS record. These elements include field (tag) 229 (Full Journal Title), 320 (ISSN) and 321 (CODEN). The full journal title is mandatory, and either the ISSN or the CODEN must be included (both may appear). Instructions on how to use this and other elements of the INIS record format are found in INIS: Guide to Bibliographic Description (IAEA-INIS-1). In order to help the user find titles easily, the list is arranged in six parts, followed by summary statistics: - In Part I, all key journals are grouped under the name of the country or international organization responsible for their input in INIS, then sorted alphabetically under their title. - In Part II, all key journals are sorted alphabetically under their title. The name of the country or international organization responsible for their input in INIS is entered in parentheses within the body of the entry. - In Part III, all journals that are regularly scanned by

  15. Chitinase from phaseolus vulgaris leaves

    International Nuclear Information System (INIS)

    Boller, T.; Gehri, A.; Mauch, F.; Vogeli, V.

    1988-01-01

    This paper examines the effect of ethylene on chitinase activity in bean leaves. The authors have purified the enzyme in the course of their work. The purification method is detailed and the colorimetric and radiochemical assays are compared

  16. The Problems of Parental Leave.

    Science.gov (United States)

    Price, Sean

    2017-10-01

    The United States is the only major industrialized country in the world to not require paid parental leave. Numerous studies have shown that allowing parents time with a newborn makes the child and the parents healthier, both physically and mentally. Many physicians, especially those who work in practices with five or fewer doctors, worry about how to pay for parental leave for themselves and their staff.

  17. [Disability leave and sick leave in Spain. 2016 legislative update].

    Science.gov (United States)

    Vicente-Herrero, María Teófila; Terradillos-García, María Jesús; Capdevila-García, Luisa M; Ramírez-Íñiguez de la Torre, María Victoria; Aguilar-Jiménez, Encarna; Aguado-Benedí, María José; López-González, Angel Arturo; Torres-Alberich, José Ignacio

    2018-01-01

    In Spanish, the concepts of discapacidad (disability leave) and incapacidad (sick leave) jointly refer to the impairment of a person due to injuries, diseases or deficiencies that limit their activity in a social, personal or occupational field. However, this common link does not imply that both concepts are the same. Statistical data from INE (Instituto Nacional de Estadística: Statistic National Institute) show that Spain had in 2015 3.85 million persons with a disability (59.8% were women). Statistical data from 2015 from INSS (Instituto Nacional de Seguridad Social: Social Security National Institute) show high levels in the number of processes and in workers affected by temporary sick leave, with social costs to the social security system. Both concepts have been updated: about disability leave, Law 39/2006 adjusted terminology by avoiding the use of concepts with discriminating or pejorative connotation. Regarding sick leave, the Ley General de Seguridad Social (General Social Security Law)has been amended and came into effect in January, 2016. It is necessary to know and distinguish these aspects for a better administrative management, and a more oriented information to the affected patient.

  18. Application of Finite Element Method to Analyze the Influences of Process Parameters on the Cut Surface in Fine Blanking Processes by Using Clearance-Dependent Critical Fracture Criteria

    Directory of Open Access Journals (Sweden)

    Phyo Wai Myint

    2018-04-01

    Full Text Available The correct choice of process parameters is important in predicting the cut surface and obtaining a fully-fine sheared surface in the fine blanking process. The researchers used the value of the critical fracture criterion obtained by long duration experiments to predict the conditions of cut surfaces in the fine blanking process. In this study, the clearance-dependent critical ductile fracture criteria obtained by the Cockcroft-Latham and Oyane criteria were used to reduce the time and cost of experiments to obtain the value of the critical fracture criterion. The Finite Element Method (FEM was applied to fine blanking processes to study the influences of process parameters such as the initial compression, the punch and die corner radii and the shape and size of the V-ring indenter on the length of the sheared surface. The effects of stress triaxiality and punch diameters on the cut surface produced by the fine blanking process are also discussed. The verified process parameters and tool geometry for obtaining a fully-fine sheared SPCC surface are described. The results showed that the accurate and stable prediction of ductile fracture initiation can be achieved using the Oyane criterion.

  19. Can we still dream when the mind is blank? Sleep and dream mentations in auto-activation deficit.

    Science.gov (United States)

    Leu-Semenescu, Smaranda; Uguccioni, Ginevra; Golmard, Jean-Louis; Czernecki, Virginie; Yelnik, Jerome; Dubois, Bruno; Forgeot d'Arc, Baudouin; Grabli, David; Levy, Richard; Arnulf, Isabelle

    2013-10-01

    Bilateral damage to the basal ganglia causes auto-activation deficit, a neuropsychological syndrome characterized by striking apathy, with a loss of self-driven behaviour that is partially reversible with external stimulation. Some patients with auto-activation deficit also experience a mental emptiness, which is defined as an absence of any self-reported thoughts. We asked whether this deficit in spontaneous activation of mental processing may be reversed during REM sleep, when dreaming activity is potentially elicited by bottom-up brainstem stimulation on the cortex. Sleep and video monitoring over two nights and cognitive tests were performed on 13 patients with auto-activation deficit secondary to bilateral striato-pallidal lesions and 13 healthy subjects. Dream mentations were collected from home diaries and after forced awakenings in non-REM and REM sleep. The home diaries were blindly analysed for length, complexity and bizarreness. A mental blank during wakefulness was complete in six patients and partial in one patient. Four (31%) patients with auto-activation deficit (versus 92% of control subjects) reported mentations when awakened from REM sleep, even when they demonstrated a mental blank during the daytime (n = 2). However, the patients' dream reports were infrequent, short, devoid of any bizarre or emotional elements and tended to be less complex than the dream mentations of control subjects. The sleep duration, continuity and stages were similar between the groups, except for a striking absence of sleep spindles in 6 of 13 patients with auto-activation deficit, despite an intact thalamus. The presence of spontaneous dreams in REM sleep in the absence of thoughts during wakefulness in patients with auto-activation deficit supports the idea that simple dream imagery is generated by brainstem stimulation and is sent to the sensory cortex. However, the lack of complexity in these dream mentations suggests that the full dreaming process (scenario

  20. 7 CFR 1927.55 - Title clearance services.

    Science.gov (United States)

    2010-01-01

    ... REGULATIONS TITLE CLEARANCE AND LOAN CLOSING Real Estate Title Clearance and Loan Closing § 1927.55 Title clearance services. (a) Responsibilities of closing agents. Services to be provided to the agency and the borrower by a closing agent in connection with the transaction vary depending on whether a title insurance...

  1. Title of the paper goes here second line

    Indian Academy of Sciences (India)

    %%Please download if these packages are not included %%in your local TeX distribution %%txfonts,balance,textcase,float %% \\begin{document} %%paper title %%For line breaks, \\\\ can be used within title \\title{Title of the paper goes here\\\\ second line} %%author names are separated by comma (,) %%use \\and before ...

  2. Roadmap Through Title XX. Financing Services for Children Through Title XX and Other Programs: Manual 5.

    Science.gov (United States)

    Copeland, William C.; Iversen, Iver A.

    This manual, part of a Hecht Institute four-manual series entitled Financing Children's Services Through Title XX and Related Programs, teaches what Title XX regulations are, what they mean, and what actions and procedures are commanded by them. The first section covers the necessity of rule systems, the characteristics of a good rule system and…

  3. Why People Leave Their Jobs?

    Directory of Open Access Journals (Sweden)

    Luis R. Domínguez A.

    2014-12-01

    Full Text Available This article aims to show the results of the review of literature of relevant studies of the causal elements of intention to leave in the last five years (2009-2013. The method used to evaluate the literature was based on the seven steps for research synthesis: problem formulation, literature search, obtaining information from studies, quality assessment studies, analysis and integration of results, interpretation of evidence and presentation of results. 48 studies from 15 different countries with a sample of 35804 employees of different companies were evaluated. The findings suggest the existence of 89 different variables influencing the intention to leave of employees in an organization. The results of this study will allow researchers to better understand the variables that can be studied to verify the impact of variables such as causal elements, but also see those that have a mediating effect between them for predicting intention to leave as an element of employee turnover. This study makes three important contributions to literature of turnover. First, in this study all the parameters associated with the intention to leave were checked. Second, this study categorizes and displays in proportion relevant interests to the scientific community whom studying employee turnover across the intention to leave. And thirdly provides clues organizations to improve some of its structural and contextual features to control turnover.

  4. 76 FR 32991 - Request (ICR) for the Family Medical Leave Act (FMLA) Employee and Employer Surveys; Comment Request

    Science.gov (United States)

    2011-06-07

    ... analysis of private sector FMLA policies allows WHD to determine how those policies affect the work-life balance of workers and the productivity and work flow of employers. The study enables DOL to shape future... Commission on Family and Medical Leave. The final report on this survey, titled ``A Workable Balance: Report...

  5. Parental leave: the impact of recent legislation on parents' leave taking.

    Science.gov (United States)

    Han, Wen-Jui; Waldfogel, Jane

    2003-02-01

    We use data from the Survey of Income and Program Participation to examine the impact of leave entitlements on unpaid leave usage by men and women after the birth of a child from 1991 to 1999. The results indicate that legislation providing the right to unpaid leave has not affected men's leave usage. The results for women are mixed: in some specifications, leave entitlements are associated with increased leave taking or longer leaves, but the results depend on how we define leave coverage. Our results point to the limited impact of unpaid leave policies and the potential importance of paid-leave policies.

  6. Title List of documents made publicly available

    International Nuclear Information System (INIS)

    1982-07-01

    The Title List of Documents Made Publicly Available is a monthly publication. It contains descriptions of the information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes: (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials and (2) nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. As used here, docketed does not refer to Court dockets; it refers to the system by which NRC maintains its regulatory records. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index. The docketed information contained in the Title List includes the information formerly issued through the Department of Energy publication Power Reactor Docket Information, last published in January 1979. Microfiche of the docketed information listed in the Title List is available for sale on a subscription basis from the National Technical Information Service (NTIS)

  7. Title List of documents made publicly available

    International Nuclear Information System (INIS)

    1982-06-01

    The Title List of Documents Made Publicly Available is a monthly publication. It contains descriptions of the information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes: (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials and (2) nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. As used here, docketed does not refer to Court dockets; it refers to the system by which NRC maintains its regulatory records. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index. The docketed information contained in the Title List includes the information formerly issued throught the Department of Energy publication Power Reactor Docket Information, last published in January 1979. Microfiche of the docketed information listed in the Title List is available for sale on a subscription basis from the National Technical Information Service (NTIS)

  8. Quarterly title list for the period ending September 1976

    International Nuclear Information System (INIS)

    1976-01-01

    The title list of the Max-Planck-Institut fuer Plasmaphysik and the Projektgruppe fuer Laserforschung of the MPG is concerned with the period from July until September 1976, and it contains: a) 12 titles and abstracts of laboratory reports, b) 37 titles of publications (30 abstracts), c) 20 titles of articles submitted for publication (16 abstracts), and d) 25 titles of lectures (12 abstracts). (GG) [de

  9. Energy Information Data Base: serial titles

    International Nuclear Information System (INIS)

    1980-06-01

    The Department of Energy Technical Information Center (TIC) is responsible for creating bibliographic data bases that are used in the announcement and retrieval of publications dealing with all phases of energy. The TIC interactive information processing system makes use of a number of computerized authorities so that consistency can be maintained and indexes can be produced. One such authority is the Energy Information Data Base: Serial Titles. This authority contains the full and abbreviated journal title, country of publication, CODEN, and certain codes. This revision replaces previous revisions of this document

  10. Title list of documents made publicly available

    International Nuclear Information System (INIS)

    1991-01-01

    The Title List of Documents Made Publicly Available is a monthly publication. It contains descriptions of the information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes docketed material associated with civilian nuclear power plants and other uses of radioactive materials and nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index. The docketed information contained in the Title List includes the information formerly issued though the Department of Energy publication Power Reactor Docket Information, last published in January 1979

  11. An Evaluation of Paid Leave

    DEFF Research Database (Denmark)

    Albæk, Karsten

    This paper analyzes a labor market program which enables workers to leave employment temporarily with a compensation financed by the taxpayers. The main aim of the program was to increase the chances of the unemployed finding a job. However, the empirical analysis reveals a clear negative...... relationship between the unemployment rate and transition rates from employment into the paid leave scheme. Program participation is low, precisely in those labor market states, where the scheme has a potential to perform as a remedy by increasing the transition rate from unemployment to employment. Several...

  12. Interactions with combined chemical cues inform harvester ant foragers' decisions to leave the nest in search of food.

    Directory of Open Access Journals (Sweden)

    Michael J Greene

    Full Text Available Social insect colonies operate without central control or any global assessment of what needs to be done by workers. Colony organization arises from the responses of individuals to local cues. Red harvester ants (Pogonomyrmex barbatus regulate foraging using interactions between returning and outgoing foragers. The rate at which foragers return with seeds, a measure of food availability, sets the rate at which outgoing foragers leave the nest on foraging trips. We used mimics to test whether outgoing foragers inside the nest respond to the odor of food, oleic acid, the odor of the forager itself, cuticular hydrocarbons, or a combination of both with increased foraging activity. We compared foraging activity, the rate at which foragers passed a line on a trail, before and after the addition of mimics. The combination of both odors, those of food and of foragers, is required to stimulate foraging. The addition of blank mimics, mimics coated with food odor alone, or mimics coated with forager odor alone did not increase foraging activity. We compared the rates at which foragers inside the nest interacted with other ants, blank mimics, and mimics coated with a combination of food and forager odor. Foragers inside the nest interacted more with mimics coated with combined forager/seed odors than with blank mimics, and these interactions had the same effect as those with other foragers. Outgoing foragers inside the nest entrance are stimulated to leave the nest in search of food by interacting with foragers returning with seeds. By using the combined odors of forager cuticular hydrocarbons and of seeds, the colony captures precise information, on the timescale of seconds, about the current availability of food.

  13. Blank Paper Scares Me.

    Science.gov (United States)

    Swope, Darcy M.

    1984-01-01

    One way art teachers can motivate emotionally disturbed 5- to 12-year-old children who suffer from fear of failure and poor self-concepts is through the sharing of a book or record. A relaxed, safe atmosphere established through readings or songs allows children with special needs to experiment and express themselves through art. (RM)

  14. 20 CFR 408.931 - How much will we withhold from your title II and title XVI benefits to recover a title VIII...

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false How much will we withhold from your title II... and Overpayments Adjustment of Title II Benefits § 408.931 How much will we withhold from your title...-due benefits. (b)(1) We will collect the overpayment from current monthly benefits due in a month...

  15. Watch out for the leaves!

    CERN Multimedia

    HSE Unit

    2013-01-01

    Now that autumn is here, dead leaves falling from the trees form a colourful carpet that is pleasing to the eye. However, the reality is less pleasant for pedestrians, since these leaves increase the risk of slipping and falling, especially when the ground is wet.   These conditions are also hazardous for two- and four-wheeled vehicles, whose grip on the ground can be severely reduced, thereby increasing the risk of them skidding out of control. Cyclists are among the most vulnerable road users when faced with these hazards. It is therefore essential to be alert to the dangers, which can be lessened by taking a few simple precautions such as moderating your speed and wearing suitable shoes. We also invite you to notify the Service Desk if you notice a road or pavement where there is a high concentration of dead leaves. The CERN Roads and Drainage Service will then ensure that the leaves are cleared in order to reduce the risk of accidents in the area.

  16. Nutrient resorption from seagrass leaves

    NARCIS (Netherlands)

    Stapel, J.; Hemminga, M.A.

    1997-01-01

    The resorption of nutrients (C, N and P) from senescent leaves of six seagrass species from nine different locations in tropical (Indonesia and Kenya), Mediterranean (Spain) and temperate (The Netherlands) regions has been investigated. Resorption was quantitatively assessed by calculating the

  17. Factors Influencing Title VII Bilingual Program Institutionalization.

    Science.gov (United States)

    Lewis, Gerald R.; And Others

    1985-01-01

    This study of the primary restraining and driving forces that influence Title VII bilingual education programs found the external environment, the local community, to be the main factor influencing institutionalization and self-renewal. The internal environment--the local school, and the local school's organization or central office, school board,…

  18. What Difference Does a Title Make

    DEFF Research Database (Denmark)

    Balle, Søren Hattesen

    out by Gerard Genette, by naming and “designat[ing] it as precisely as possible and without too much risk of confusion” (Genette, 1997). In accordance with its title the poem thus represents the discourse of a newsreader neutrally reporting the events of war scenario. However, each section of the poem...

  19. 76 FR 60593 - Title VI; Proposed Circular

    Science.gov (United States)

    2011-09-29

    ..., several of them related to ambiguous language in the existing Circular. The proposed Circular reorganizes... regional entity, and inclusive of public and private entities. This term is used exclusively in Chapter IV... revisions to the Title VI Circular. The section that addresses the existing requirement for a Language...

  20. Browse Title Index - African Journals Online

    African Journals Online (AJOL)

    Items 801 - 850 of 1006 ... Issue, Title. Vol 59, No 4 (2017), Spatial patterns and determinants of fertility levels among women of childbearing age in Nigeria, Abstract PDF. Oluwayemisi O. Alaba, Olusanya E. Olubusoye, J.O. Olaomi. Vol 55, No 1 (2013), Spirit(ed) away: preventing foetal alcohol syndrome with motivational ...

  1. 36 CFR 254.15 - Title standards.

    Science.gov (United States)

    2010-07-01

    ...) Conveyances of lands from the United States are made by patent, quitclaim deed, or deed and without express or implied warranties, except as to hazardous substances pursuant to § 254.3 of this subpart. (c) Title... of the existing use(s) authorized under the terms of the grant, permit, easement, or lease. The non...

  2. Providing Transparency to the Title IX Process

    Science.gov (United States)

    Hartle, Terry

    2017-01-01

    When U.S. Secretary of Education Betsy DeVos announced Sept. 7, 2017, that her department would revisit how Title IX rules are enforced with respect to campus sexual assault, she said the first step would be a "transparent notice and comment process" to replace the 2011 "guidance" (and follow up 2014 guidance) that has been…

  3. Software Development Framework For Electronic Land Titles ...

    African Journals Online (AJOL)

    Record keeping is a fundamental activity of public administration. Land Titles management in Nigeria, by virtue of the Land use act 1990, is one of the functions of government. Most of the records hitherto used in managing the records of lands are documented on paper. We carried out an investigation into the suitability of ...

  4. Browse Title Index - African Journals Online

    African Journals Online (AJOL)

    Items 151 - 200 of 771 ... Issue, Title. Vol 33, No 4 (2013), Community-researcher liaisons: the Pathways to Resilience Project Advisory Panel, Abstract PDF. LC Theron. Vol 37, No 3 (2017), Comparing the achievement goal orientation of mathematics learners with and without attention-deficit hyperactivity disorder, Abstract ...

  5. Formability of dual-phase steels in deep drawing of rectangular parts: Influence of blank thickness and die radius

    Science.gov (United States)

    López, Ana María Camacho; Regueras, José María Gutiérrez

    2017-10-01

    The new goals of automotive industry related with environment concerns, the reduction of fuel emissions and the security requirements have driven up to new designs which main objective is reducing weight. It can be achieved through new materials such as nano-structured materials, fibre-reinforced composites or steels with higher strength, among others. Into the last group, the Advance High Strength Steels (AHSS) and particularly, dual-phase steels are in a predominant situation. However, despite of their special characteristics, they present issues related to their manufacturability such as springback, splits and cracks, among others. This work is focused on the deep drawing processof rectangular shapes, a very usual forming operation that allows manufacturing several automotive parts like oil pans, cases, etc. Two of the main parameters in this process which affect directly to the characteristics of final product are blank thickness (t) and die radius (Rd). Influence of t and Rd on the formability of dual-phase steels has been analysed considering values typically used in industrial manufacturing for a wide range of dual-phase steels using finite element modelling and simulation; concretely, the influence of these parameters in the percentage of thickness reduction pt(%), a quite important value for manufactured parts by deep drawing operations, which affects to its integrity and its service behaviour. Modified Morh Coulomb criteria (MMC) has been used in order to obtain Fracture Forming Limit Diagrams (FFLD) which take into account an important failure mode in dual-phase steels: shear fracture. Finally, a relation between thickness reduction percentage and studied parameters has been established fordual-phase steels, obtaining a collection of equations based on Design of Experiments (D.O.E) technique, which can be useful in order to predict approximate results.

  6. 29 CFR 825.202 - Intermittent leave or reduced leave schedule.

    Science.gov (United States)

    2010-07-01

    ... leave schedule is a leave schedule that reduces an employee's usual number of working hours per workweek, or hours per workday. A reduced leave schedule is a change in the employee's schedule for a period of... 29 Labor 3 2010-07-01 2010-07-01 false Intermittent leave or reduced leave schedule. 825.202...

  7. Proposal for the award of two contracts for the supply of fine-blanked austenitic steel collars for the cold masses of the LHC superconducting dipole magnets

    CERN Document Server

    1999-01-01

    This document concerns the award of two contracts for the supply of 12 500 000 fine-blanked austenitic steel collars in three different shapes and of two different types for the cold masses of the LHC superconducting dipole magnets. Following a market survey carried out among 70 firms in fourteen Member States and one firm in Japan, a call for tenders (IT-2469/LHC/LHC) was sent on 3 June 1999 to eleven firms in five Member States and one firm in Japan. By the closing date, CERN had received five tenders. The Finance Committee is invited to agree to the negotiation of two contracts with: - MALVESTITI (IT) for the supply of up to 7 812 500 fine-blanked austenitic steel collars, which represents 5/8 of the total quantity required for the cold masses of the LHC superconducting dipole magnets, for a total amount of up to 6 908 509 Swiss francs, subject to revision for contractual deliveries after 31 December 2001, with an option for the supply of up to 4 687 500 additional fine-blanked austenitic steel collars, wh...

  8. Candidate isolated neutron stars and other optically blank x-ray fields identified from the rosat all-sky and sloan digital sky surveys

    Energy Technology Data Exchange (ETDEWEB)

    Agueros, Marcel A.; Anderson, Scott F.; /Washington U., Seattle, Astron. Dept.; Margon, Bruce; /Baltimore, Space Telescope Sci.; Haberl, Frank; Voges, Wolfgang; /Garching,; Annis, James; /Fermilab; Schneider, Donald P.; /Penn State U., Astron. Astrophys.; Brinkmann, Jonathan; /Apache Point Observ.

    2005-11-01

    Only seven radio-quiet isolated neutron stars (INSs) emitting thermal X rays are known, a sample that has yet to definitively address such fundamental issues as the equation of state of degenerate neutron matter. We describe a selection algorithm based on a cross-correlation of the ROSAT All-Sky Survey (RASS) and the Sloan Digital Sky Survey (SDSS) that identifies X-ray error circles devoid of plausible optical counterparts to the SDSS g {approx} 22 magnitudes limit. We quantitatively characterize these error circles as optically blank; they may host INSs or other similarly exotic X-ray sources such as radio-quiet BL Lacs, obscured AGN, etc. Our search is an order of magnitude more selective than previous searches for optically blank RASS error circles, and excludes the 99.9% of error circles that contain more common X-ray-emitting subclasses. We find 11 candidates, nine of which are new. While our search is designed to find the best INS candidates and not to produce a complete list of INSs in the RASS, it is reassuring that our number of candidates is consistent with predictions from INS population models. Further X-ray observations will obtain pinpoint positions and determine whether these sources are entirely optically blank at g {approx} 22, supporting the presence of likely isolated neutron stars and perhaps enabling detailed follow-up studies of neutron star physics.

  9. 24 CFR 203.386 - Coverage of title evidence.

    Science.gov (United States)

    2010-04-01

    ... SINGLE FAMILY MORTGAGE INSURANCE Contract Rights and Obligations Property Title Transfers and Title... the public records, there are not, at such date, any outstanding prior liens, including any past-due...

  10. Novel concept for measurement of global blank draw-in when deep drawing outer skin automotive components

    Science.gov (United States)

    Kraft, M.; Bürgel, U.

    2017-09-01

    Modern press shops in the automotive industry have to deal with many challenges. One challenge is to achieve a consistent part quality. In order to reach this target, modern press systems and tools are equipped with several types of sensors. For example, there are sensors to measure characteristic values of blanks or sensors to measure the temperature in the tools. Often several sensors are used simultaneously. A significant parameter for determining the quality of draw panels is the draw-in amount. Previously, it was only possible to measure selective points of the draw-in amount due to sensors in the tools. All the known sensors have disadvantages, for example, they are exposed to wearing or susceptible to contamination. In this paper, a sensor system will be introduced that allows the measurement of the global draw-in amount of a drawn panel. Here, the draw-in amount is not measured in the draw die, it is measured during the transportation of the part to the following operation. Within the short transport time the part can be fully covered by an optical system. This leads to a multitude of advantages compared with previously known systems. For example, it is no longer necessary to equip every tool with sensor technology to measure the draw-in amount. Now it is sufficient to equip every press line with a single system to measure the draw-in. This fact leads not only to lower costs, it also simplifies the tool design. In addition, the risk of contamination of the sensor system is greatly reduced. The paper will also introduce an actuator that was built to locally vary the blankholder forces for a sheet metal forming process. Furthermore, an FEM model is presented that allows the determination of the effective range of these actuators. With the knowledge from the FEM simulation, an approach for an open loop control is presented. With this approach, the press shops at Opel are developing a control procedure in order to influence the stamping process positively.

  11. Long-term sick leave and its risk factors during pregnancy among Danish hospital employees

    DEFF Research Database (Denmark)

    Kærlev, Linda; Jacobsen, Lene B.; Olsen, Jørn

    2004-01-01

    AIM: The authors sought to describe risk indicators of long-term sick leave during pregnancy among hospital employees. METHODS: A register-based study was undertaken of 4,852 female hospital employees aged 20-45 years from the second largest hospital in Denmark during 1995-99 based on job titles...... leave days than other hospital employees. Part-time work, previous sickness absence not related to pregnancy, and previous chronic back pain were risk factors for long-term sick leave as were much walking or standing, long working days, high work level, little practical support from supervisors...... women in a manner that optimizes their health and well-being....

  12. Leaving the hospital - your discharge plan

    Science.gov (United States)

    ... patientinstructions/000867.htm Leaving the hospital - your discharge plan To use the sharing features on this page, ... once you leave. This is called a discharge plan. Your health care providers at the hospital will ...

  13. 14 CFR 1245.109 - Assignment of title to NASA.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Assignment of title to NASA. 1245.109... INTELLECTUAL PROPERTY RIGHTS Patent Waiver Regulations § 1245.109 Assignment of title to NASA. (a) The instrument of waiver set forth in § 1245.115(c) shall be voided by NASA with respect to the domestic title to...

  14. Title IX: With New Opportunities, Girls' Interest Rises

    Science.gov (United States)

    Toporek, Bryan

    2012-01-01

    On June 23, 1972, President Richard M. Nixon signed into law Title IX of the Education Amendments of 1972, which prohibits gender discrimination in any federally financed education program or activity. Title IX is far-reaching, but the law is most often associated with school and college athletics. Title IX allows schools to prove their athletic…

  15. Exploring New Directions: Title I in the Year 2000.

    Science.gov (United States)

    Puma, Michael J.; Drury, Darrel W.

    This report takes stock of the present Title I program, identifies the most promising approaches to educating the nation's disadvantaged children, and offers guidance to policymakers seeking to improve Title I's effectiveness. The report draws upon hundreds of studies, evaluations, and other documents, and details the evolution of the Title I…

  16. 40 CFR 300.220 - Related Title III issues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 27 2010-07-01 2010-07-01 false Related Title III issues. 300.220 Section 300.220 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SUPERFUND, EMERGENCY... PLAN Planning and Preparedness § 300.220 Related Title III issues. Other related Title III requirements...

  17. Childcare and the division of parental leave

    OpenAIRE

    Norén, Anna

    2015-01-01

    Despite several policies aimed at increasing fathers' participation in the caring of children, Swedish mothers still use the bulk of the paid parental leave which may have several negative consequences for the family e.g. in terms of weaker labor market attachment for the mother. Division of parental leave is likely affected by how parents value the costs associated with parental leave. I investigate whether a reduction in the care burden, or a decreased non-monetary cost, of parental leave t...

  18. The CCCTB Rules on Leaving a Group

    NARCIS (Netherlands)

    van de Streek, J.

    2012-01-01

    The consolidation system proposed in the draft of the CCCTB Directive puts relationships between Member States on edge. This is clearly apparent in the rules that apply when a company leaves a group. In this article the leaving rules are examined. Although the leaving rules are claimed to be

  19. Sugar beet leaves for functional ingredients

    NARCIS (Netherlands)

    Tamayo Tenorio, Angelica

    2017-01-01

    Plant leaves are recognised as a potential source for food applications based on their nutritional profile and interesting technological properties of leaf components, and based on the large availability of plant leaves in agricultural waste streams. Besides proteins, leaves have a rich

  20. Compassionate Care Leave & Benefits. CAUT Briefing Note

    Science.gov (United States)

    Canadian Association of University Teachers, 2016

    2016-01-01

    Compassionate care leave and benefits were introduced in 2003/04 to help employees cope with this difficult work-life balance challenge. Employment Standards legislation and the Employment Insurance program (EI) were amended to provide leave without pay, with payment of EI benefits for compassionate care leave. Collective agreements have been…

  1. On the Sharing of Temporary Parental Leave

    DEFF Research Database (Denmark)

    Amilon, Anna

    2007-01-01

    This paper views temporary parental leave (leave from work to take care of a sick child) as a household public good, produced with time inputs of the parents as the only input. Assuming equal productivities in the production of temporary parental leave and equal utility functions of the spouses...

  2. Resource capture by single leaves

    Energy Technology Data Exchange (ETDEWEB)

    Long, S.P.

    1992-05-01

    Leaves show a variety of strategies for maximizing CO{sub 2} and light capture. These are more meaningfully explained if they are considered in the context of maximizing capture relative to the utilization of water, nutrients and carbohydrates reserves. There is considerable variation between crops in their efficiency of CO{sub 2} and light capture at the leaf level. Understanding of these mechanisms indicate some ways in which efficiency of resource capture could be level cannot be meaningfully considered without simultaneous understanding of implications at the canopy level. 36 refs., 5 figs., 1 tab.

  3. Formulating the Right Title for a Research Article.

    Science.gov (United States)

    Bavdekar, Sandeep B

    2016-02-01

    Title is an important part of the article. It condenses article content in a few words and captures readers' attention. A good title for a research article is the one which, on its own, is able to introduce the research work to the fullest extent, but in a concise manner. Writing scientific titles that are informative and attractive is a challenging task. This communication describes the importance of titles and the methods of creating appropriate titles for research papers. © Journal of the Association of Physicians of India 2011.

  4. Examining the Evolution of Paid Parental Leave.

    Science.gov (United States)

    Sladek, Carol

    While the United States continues to be the only developed nation without mandated paid maternity leave, U.S. employers are blazing their own trail for new parents. This article defines parental leave, explains what's driving the increased interest in paid parental leave among employers offering it and discusses how paid parental leave can benefit employers and employees alike. Finally, the author discusses why not all employers are offering these benefits as well as considerations for employers contemplating whether paid parental leave is right for them.

  5. 5 CFR 630.1015 - Movement between voluntary leave bank and leave transfer programs.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Movement between voluntary leave bank and leave transfer programs. 630.1015 Section 630.1015 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS ABSENCE AND LEAVE Voluntary Leave Bank Program § 630.1015 Movement...

  6. 5 CFR 630.1104 - Donations from a leave bank to an emergency leave transfer program.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Donations from a leave bank to an emergency leave transfer program. 630.1104 Section 630.1104 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS ABSENCE AND LEAVE Emergency Leave Transfer Program § 630.1104 Donations...

  7. 29 CFR 825.205 - Increments of FMLA leave for intermittent or reduced schedule leave.

    Science.gov (United States)

    2010-07-01

    ... intermittent leave or working a reduced leave schedule to commence or end work mid-way through a shift, such as... per week, but works only 20 hours a week under a reduced leave schedule, the employee's ten hours of... 29 Labor 3 2010-07-01 2010-07-01 false Increments of FMLA leave for intermittent or reduced...

  8. Title list of documents made publicly available

    International Nuclear Information System (INIS)

    1979-12-01

    This monthly publication contains descriptions of the information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes docketed material associated with civilian nuclear power plants and other uses of radioactive materials, and nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index. The docketed information includes the inforation formerly issued through the Department of Energy's Technical Information Center under the title Power Reactor Docket Information (PRDI) and, in addition, information received or generated on other uses of radioactive materials

  9. Title list of documents made publicly available

    International Nuclear Information System (INIS)

    1994-06-01

    The Title List of Documents Made Publicly Available is a monthly publication. It contains descriptions of the information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials and (2) nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. As used here, docketed does not refer to Court dockets; it refers to the system by which NRC maintains its regulatory records. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index

  10. Title list of documents made publicly available

    International Nuclear Information System (INIS)

    1982-03-01

    The Title List of Documents Made Publicly Available is a monthly publication. It contains descriptions of the information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials and (2) nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. As used here, docketed does not refer to Court dockets; it refers to the system by which NRC maintains its regulatory records. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index

  11. Long-term sick leave and its risk factors during pregnancy among Danish hospital employees.

    Science.gov (United States)

    Kaerlev, Linda; Jacobsen, Lene B; Olsen, Jørn; Bonde, Jens Peter

    2004-01-01

    The authors sought to describe risk indicators of long-term sick leave during pregnancy among hospital employees. A register-based study was undertaken of 4,852 female hospital employees aged 20-45 years from the second largest hospital in Denmark during 1995-99 based on job titles, working time, sick leave, and births combined with a survey among a total of 773 women who had been pregnant during their employment (response rate 85%). Altogether 236 (31%) were on sick leave for at least 10% of their scheduled work time during their latest pregnancy and 169 (22%) had been absent at least 20% of the time. The pregnant women had an average sickness absence of 6.1 days per month, non-pregnant women 0.95 days per month. Sick leave was more frequent in late than in early gestation. Women employed as nursing aides or hospital orderlies, launderers, and nurses had more sick leave days than other hospital employees. Part-time work, previous sickness absence not related to pregnancy, and previous chronic back pain were risk factors for long-term sick leave as were much walking or standing, long working days, high work level, little practical support from supervisors and colleagues, low job control, much lifting and night or shift work. Sick leave was unrelated to family size, support from the family and number of working years. Long-term sick leave during pregnancy was frequent and to some extent predictable. Efforts should be made to organize work for pregnant women in a manner that optimizes their health and well-being.

  12. Evaluation of volatile organic compound (VOC) blank data and application of study reporting levels to groundwater data collected for the California GAMA Priority Basin Project, May 2004 through September 2010

    Science.gov (United States)

    Fram, Miranda S.; Olsen, Lisa D.; Belitz, Kenneth

    2012-01-01

    Volatile organic compounds (VOCs) were analyzed in quality-control samples collected for the California Groundwater Ambient Monitoring and Assessment (GAMA) Program Priority Basin Project. From May 2004 through September 2010, a total of 2,026 groundwater samples, 211 field blanks, and 109 source-solution blanks were collected and analyzed for concentrations of 85 VOCs. Results from analyses of these field and source-solution blanks and of 2,411 laboratory instrument blanks during the same time period were used to assess the quality of data for the 2,026 groundwater samples. Eighteen VOCs were detected in field blanks or source-solution blanks: acetone, benzene, bromodichloromethane, 2-butanone, carbon disulfide, chloroform, 1,1-dichloroethene, dichloromethane, ethylbenzene, tetrachloroethene, styrene, tetrahydrofuran, toluene, trichloroethene, trichlorofluoromethane, 1,2,4-trimethylbenzene, m- and p-xylenes, and o-xylene. The objective of the evaluation of the VOC-blank data was to determine if study reporting levels (SRLs) were needed for any of the VOCs detected in blanks to ensure the quality of the data from groundwater samples. An SRL is equivalent to a raised reporting level that is used in place of the reporting level used by the analyzing laboratory [long‑term method detection level (LT-MDL) or laboratory reporting level (LRL)] to reduce the probability of reporting false-positive detections. Evaluation of VOC-blank data was done in three stages: (1) identification of a set of representative quality‑control field blanks (QCFBs) to be used for calculation of SRLs and identification of VOCs amenable to the SRL approach, (2) evaluation of potential sources of contamination to blanks and groundwater samples by VOCs detected in field blanks, and (3) selection of appropriate SRLs from among four potential SRLs for VOCs detected in field blanks and application of those SRLs to the groundwater data. An important conclusion from this study is that to ensure the

  13. Wisconsin Public Service, Weston Generating Station; Petition to Object to Issuance of Title V Operating Permit

    Science.gov (United States)

    This document may be of assistance in applying the Title V air operating permit regulations. This document is part of the Title V Petition Database available at www2.epa.gov/title-v-operating-permits/title-v-petition-database.

  14. Tennessee Valley Authority, Paradise Fossil Plant; Petition to Object to Title V Operating Permit

    Science.gov (United States)

    This document may be of assistance in applying the Title V air operating permit regulations. This document is part of the Title V Petition Database available at www2.epa.gov/title-v-operating-permits/title-v-petition-database.

  15. Tennessee Valley Authority, Paradise Fossil Plant; Order Responding Petition to Object to Title V Operating Permit

    Science.gov (United States)

    This document may be of assistance in applying the Title V air operating permit regulations. This document is part of the Title V Petition Database available at www2.epa.gov/title-v-operating-permits/title-v-petition-database.

  16. 20 CFR 416.573 - How much will we withhold from your title II and title VIII benefits to recover a title XVI...

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false How much will we withhold from your title II... Payment of Benefits, Overpayments, and Underpayments § 416.573 How much will we withhold from your title...-due benefits. (b)(1) We will collect the overpayment from current monthly benefits due in a month by...

  17. RECRUITMENT FINANCED BY SAVED LEAVE (RSL PROGRAMME)

    CERN Multimedia

    Division du Personnel; Tel. 73903

    1999-01-01

    Transfer to the saved leave account and saved leave bonusStaff members participating in the RSL programme may opt to transfer up to 10 days of unused annual leave or unused compensatory leave into their saved leave account, at the end of the leave year, i.e. 30 September (as set out in the implementation procedure dated 27 August 1997).A leave transfer request form, which you should complete, sign and return, if you wish to use this possibility, has been addressed you. To allow the necessary time for the processing of your request, you should return it without delay.As foreseen in the implementation procedure, an additional day of saved leave will be granted for each full period of 20 days remaining in the saved leave account on 31 December 1999, for any staff member participating in the RSL programme until that date.For part-time staff members participating in the RSL programme, the above-mentioned days of leave (annual, compensatory and saved) are adjusted proportionally to their contractual working week as...

  18. Title XX and CETA. A Coordination Guide for Title XX Administrators.

    Science.gov (United States)

    Urban Management Consultants of San Francisco, Inc., CA.

    Written for the social service (Title XX) administrator at the State or sub-State level, this guide is intended to serve four major purposes: (1) Provide selected insights into what the Comprehensive Employment and Training Act (CETA) is and how it works; (2) point out potential areas for coordination which, from study or field experience, hold…

  19. Paternity leave experiences of NHS doctors.

    Science.gov (United States)

    Gordon, Hannah; Szram, Joanna

    2013-10-01

    This study assesses NHS doctors' experiences of paternity leave and evaluates whether practices have changed since the introduction of additional paternity leave (APL) in April 2011. An anonymised online survey designed to discover experiences and uptake of APL and ordinary paternity leave (OPL) was distributed to all members of the London Deanery Synapse® network. In total, 364 fathers responded. Their seniority ranged from foundation trainees to consultants. Following the formal introduction of OPL in 2003, the number of fathers taking any paternity leave increased (from 50% to 95.6%). The majority of respondents (76.7%) felt well supported by their employer. Since the introduction of APL, 3% of respondents took additional leave. Reasons for the low uptake of APL included the impracticalities of the law, poor awareness and perceived attitudes and implications for training. Problems with OPL included the inadequate provision of cover and difficulties in timing the leave appropriately.

  20. The Effect of Reading Involvement through Open-Ended Strategy vs. Fill-in- the- Blanks Strategy on Young EFL Learners’ Reading Comprehension Ability

    Directory of Open Access Journals (Sweden)

    Rita Salehi Sepehr

    2014-11-01

    Full Text Available The present study investigated the extent to which an instructional framework of integrating strategy instruction (open-ended strategy and fill-in-the blanks strategy with motivation- support affected on reading result for young EFL learners. The central area of exploration included a comparison among three approaches to reading instruction: First, fill-in-the blanks strategy intervention; second, open-ended strategy intervention; and last, a control group which received the conventional reading strategies. The participants were sampled from amongst a group of seventy-seven pre-intermediate EFL learners in a language school in Tehran- Iran based on convenient sampling technique. For the sake of measurement, the researchers administered PET and CELT along with reading strategy based-test to quantify the participants’ current level of knowledge as well as the degree of achievement after treatment. For measurement’s sake, different types of tests such as PET, reading comprehension test (CELT, and reading strategy based- test were employed to quantify the participants’ current level of knowledge as well as the degree of achievement before and after instruction. The result of the present study indicated that the experimental groups had a significant improvement over the control group. Also, the level of learners’ reading engagement during classroom work mediated the instructional effects on reading outcomes. The results of this study can be to the benefit of both EFL and ESL teachers to teach reading comprehension using the student's critical mind as well as critical involvement in the reading tasks.

  1. Paid Maternity Leave and Breastfeeding Outcomes.

    Science.gov (United States)

    Mirkovic, Kelsey R; Perrine, Cria G; Scanlon, Kelley S

    2016-09-01

    Despite the benefits of breastfeeding, rates in the United States are low. Shorter maternity leave is associated with lower initiation and shorter durations of breastfeeding; however, little is known about how paid maternity leave may influence breastfeeding rates. We used data from the 2006-2010 U.S. National Survey of Family Growth on the most recent birth to employed women who delivered a child within the previous 5 years. Separate multivariable logistic regression models were used to describe the associations between paid leave duration (0, 1-5, 6-11, ≥ 12 weeks, maternity leave not taken) and three outcomes: 1) breastfeeding initiation, 2) 6-month duration, and 3) 6-month duration among initiators. Twenty-eight percent of prenatally employed women received no paid leave. Women who received 12 or more weeks of paid leave were more likely to initiate breastfeeding compared to women with no paid leave (87.3% vs 66.7%, adjusted odds ratio [aOR] 2.83 [95% confidence interval {CI} 1.23-6.48]). Similarly, women with 12 or more weeks of paid leave were more likely to breastfeed at 6 months, compared to women with no paid leave (24.9% vs 50.1%, aOR 2.26 [95% CI 1.20-4.26]). Among women who initiated breastfeeding, having received 12 or more weeks' paid leave increased the odds of breastfeeding for 6 or more months; however, the association was not statistically significant in the adjusted model (aOR 1.81 [95% CI 0.93-3.52]). Employed women who received 12 or more weeks of paid maternity leave were more likely to initiate breastfeeding and be breastfeeding their child at 6 months than those without paid leave. Published 2016. This article is a U.S. Government work and is in the public domain in the USA.

  2. [New cerebroside from leaves of pineapple].

    Science.gov (United States)

    Wang, Jin-Ping; Wang, Hong-Ying; Du, Li-Jun; Ding, Yi; Xing, Dong-Ming; Wang, Wei

    2007-03-01

    To study the chemical constituents of the leaves of pineapple. Chromatographic methods were used to isolate compounds from the leaves of pineapple and spectral methods were used to identify the structures of the isolated compounds. Compound 1 was isolated from the leaves of pineapple. It was identified as 1-O-beta-D-glucopyranosyl-(2S, 3R, 4E, 11E)-2-[(2(R)-hydroxydocosanoyl) amido]-4, 11-hexadecanediene-1, 3-diol. Compound 1 was a new compound.

  3. Nurses' leaving intentions: antecedents and mediating factors.

    Science.gov (United States)

    Takase, Miyuki; Yamashita, Noriko; Oba, Keiko

    2008-05-01

    This paper is a report of a study to investigate how nurses' work values, perceptions of environmental characteristics, and organizational commitment are related to their leaving intentions. Nurse leaving is a serious international problem as it contributes to the nursing shortage that threatens the welfare of society. The characteristics of nurses, the work environment and nurses' feelings towards their jobs (or organizations) have an impact on their leaving intentions. A convenience sample of 849 Registered Nurses was recruited from three public hospitals in the central-west region of Japan during 2006 and 319 completed questionnaires were returned (response rate 39%). Data were analysed using regression analysis. Nurses' work values and their perceptions of their workplace environment interacted to influence leaving intentions. When there was a match between the importance nurses placed on being able to challenge current clinical practices and the number of the actual opportunities to do so, leaving intentions were low. When there was a mismatch, intention to quit the job became stronger. In addition, organizational commitment intervened between nurses' perceptions of the match in clinical challenges and leaving intention. Nurses' leaving intentions, deserve extensive exploration of their causes. Such exploration should include attending to both nurses' needs and organizational characteristics, investigating how the match between them could affect nurses' leaving intention, and exploring factors that intervene between nurses' perceptions of the match and leaving intention.

  4. Citation Oil and Gas Corporation... Title V Applicability Determination

    Science.gov (United States)

    This document may be of assistance in applying the Title V air operating permit regulations. This document is part of the Title V Policy and Guidance Database available at www2.epa.gov/title-v-operating-permits/title-v-operating-permit-policy-and-guidance-document-index. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

  5. INTRODUCTION OF A NEW LEAVE MANAGEMENT SYSTEM

    CERN Multimedia

    DIVISION HR

    2000-01-01

    The introduction of new leave rules (arising from the RSL, PRP and other programs) has made the present leave management system rather complicated and difficult to manage. It has therefore been decided to replace it with a more flexible and adaptable system, which will come into force on 1st October 2000. Henceforth, days of leave will be credited monthly instead of annually. Members of the personnel will have round-the-clock direct access to more detailed, confidential information regarding their various kinds of leave. They will also receive a personal monthly statement with their pay slips. The new system does not require any amendment of the regulations, except with respect to the frequency of leave calculations (monthly instead of annual). I. Main characteristics of the new leave system1. The main feature of the new system is the creation of accounts to which leave will be credited or debited as appropriate. Depending on their circumstances, members of the personnel may have up to four individual leave a...

  6. INTRODUCTION OF A NEW LEAVE MANAGEMENT SYSTEM

    CERN Document Server

    HR Division

    2000-01-01

    The introduction of new leave rules (arising from the RSL, PRP and other programmes) has made the present leave management system rather complicated and difficult to manage. It has therefore been decided to replace it with a more flexible and adaptable system, which will come into force on 1st October 2000. Henceforth, days of leave will be credited monthly instead of annually. Members of the personnel will have round-the-clock direct access to more detailed, confidential information regarding their various kinds of leave.They will also receive a personal monthly statement with their pay slips. The new system does not require any amendment of the regulations, except with respect to the frequency of leave calculations (monthly instead of annual). I. Main characteristics of the new leave system 1. The main feature of the new system is the creation of accounts to which leave will be credited or debited as appropriate. Depending on their circumstances, members of the personnel may have up to four individual leave...

  7. Antioxidant activity of Arbutus unedo leaves.

    Science.gov (United States)

    Pabuçcuoğlu, A; Kivçak, B; Baş, M; Mert, T

    2003-09-01

    The ethanol and methanol extracts of Arbutus unedo leaves were screened for antioxidant activity. The antioxidant activity was determined by an improved assay based on the decolorization of the radical monocation of [2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid)] (ABTS). The ethanol and methanol extract of A. unedo leaves displayed potent antioxidant activity.

  8. Grass leaves as potential hominin dietary resources.

    Science.gov (United States)

    Paine, Oliver C C; Koppa, Abigale; Henry, Amanda G; Leichliter, Jennifer N; Codron, Daryl; Codron, Jacqueline; Lambert, Joanna E; Sponheimer, Matt

    2018-04-01

    Discussions about early hominin diets have generally excluded grass leaves as a staple food resource, despite their ubiquity in most early hominin habitats. In particular, stable carbon isotope studies have shown a prevalent C 4 component in the diets of most taxa, and grass leaves are the single most abundant C 4 resource in African savannas. Grass leaves are typically portrayed as having little nutritional value (e.g., low in protein and high in fiber) for hominins lacking specialized digestive systems. It has also been argued that they present mechanical challenges (i.e., high toughness) for hominins with bunodont dentition. Here, we compare the nutritional and mechanical properties of grass leaves with the plants growing alongside them in African savanna habitats. We also compare grass leaves to the leaves consumed by other hominoids and demonstrate that many, though by no means all, compare favorably with the nutritional and mechanical properties of known primate foods. Our data reveal that grass leaves exhibit tremendous variation and suggest that future reconstructions of hominin dietary ecology take a more nuanced approach when considering grass leaves as a potential hominin dietary resource. Copyright © 2017. Published by Elsevier Ltd.

  9. When and Why Dropouts Leave High School

    Science.gov (United States)

    Stearns, Elizabeth; Glennie, Elizabeth J.

    2006-01-01

    Teens may leave school because of academic failure, disciplinary problems, or employment opportunities. In this article, the authors test whether the reasons dropouts leave school differ by grade level and age. We compare dropout rates and reasons across grade levels and ages for all high school students, ethnic groups, and gender groups. Across…

  10. [Beneficial effect of maternity leave on delivery].

    Science.gov (United States)

    Xu, Qian; Séguin, Louise; Goulet, Lise

    2002-01-01

    To identify the contribution of the duration of the prenatal maternity leave on term delivery. Characteristics of the prenatal maternity leave and delivery among 363 working women who had delivered a full-term infant at 1 of 4 hospitals in Montreal during 1996 were studied. The presence of an intervention or complication during delivery was observed in 68.9% of the participants. The average duration of the prenatal maternity leave was about 8 weeks (SD = 7). The adjusted risk of a difficult delivery decreased significantly with the duration of the prenatal maternity leave (OR = 0.96; 95% CI: 0.93-0.99). The duration of the maternity leave before delivery is associated with an easier term delivery for working women.

  11. Circadian rhythm of anti-fungal prenylated chromene in leaves of Piper aduncum.

    Science.gov (United States)

    Morandim, Andreia de A; Bergamo, Débora Cristina B; Kato, Massuo Jorge; Cavalheiro, Alberto José; Bolzani, Vanderlan da S; Furlan, Maysa

    2005-01-01

    Leaves of Piper aduncum accumulate the anti-fungal chromenes methyl 2,2-dimethyl-2H-1-chromene-6-carboxylate (1) and methyl 2,2-dimethyl-8-(3'-methyl-2'-butenyl)-2H-1-chromene-6-carboxylate (2). The enzymatic formation of 2 from dimethylallyl diphosphate and 1 was investigated using cell-free extracts of the title plant. An HPLC assay for the prenylation reaction was developed and the enzyme activity measured in the protein extracts. The prenyltransferase that catalyses the transfer of the dimethylallyl group to C-2' of 1 was soluble and required dimethylallyl diphosphate as the prenyl donor. In the leaves, the biosynthesis of the prenylated chromene 2 was time-regulated and prenyltransferase activity depended upon circadian variation. Preliminary characterisation and purification experiments on the prenyltransferase from P. aduncum have been performed.

  12. LightLeaves: computer controlled kinetic reflection hologram installation and a brief discussion of earlier work

    International Nuclear Information System (INIS)

    Connors Chen, Betsy

    2013-01-01

    LightLeaves is an installation combining leaf shaped, white light reflection holograms of landscape images with a special kinetic lighting device that houses a lamp and moving leaf shaped masks. The masks are controlled by an Arduino microcontroller and servomotors that position the masks in front of the illumination source of the holograms. The work is the most recent in a long series of landscapes that combine multi-hologram installations with computer controlled devices that play with the motion of the holograms, the light, sound or other elements in the work. LightLeaves was first exhibited at the Peabody Essex Museum in Salem, Massachusetts in a show titled E ye Spy: Playing with Perception .

  13. LightLeaves: computer controlled kinetic reflection hologram installation and a brief discussion of earlier work

    Energy Technology Data Exchange (ETDEWEB)

    Connors Chen, Betsy, E-mail: acmeholo@gmail.com [ACME Holography, Somerville, Massachusetts USA 02144 (United States)

    2013-02-22

    LightLeaves is an installation combining leaf shaped, white light reflection holograms of landscape images with a special kinetic lighting device that houses a lamp and moving leaf shaped masks. The masks are controlled by an Arduino microcontroller and servomotors that position the masks in front of the illumination source of the holograms. The work is the most recent in a long series of landscapes that combine multi-hologram installations with computer controlled devices that play with the motion of the holograms, the light, sound or other elements in the work. LightLeaves was first exhibited at the Peabody Essex Museum in Salem, Massachusetts in a show titled {sup E}ye Spy: Playing with Perception{sup .}.

  14. The ties that bind: what's in a title?

    Science.gov (United States)

    Neuhaus, Susan J

    2018-03-01

    Many Australian and New Zealand surgeons use the title 'Mister' rather than 'Doctor', a practice dating back to traditions established over 600 years ago. The Royal Australasian College of Surgeons is currently undergoing a period of critical self-reflection, embodied by its 'Respect' campaign. Active measures to embrace diversity and encourage women into surgery are underway. This paper reviews the historical basis to the use of gendered titles and their current use amongst fellows. De-identified demographic data from the college register of active fellows was searched by self-identified title, country or state, and gender. Data were further reviewed by surgical sub-specialty and year of fellowship. The college dataset suggests that there is significant variance in the preference for gendered titles, determined predominantly by geography rather than specialty. The highest use of gendered titles (by male and female surgeons) was in Victoria/Tasmania (58% male, 22% female) and New Zealand (81% male, 17% female). By contrast, only 2% of female surgeons in other states elected a gendered title (Miss/Mrs/Ms). Surgery is the only profession that continues to use gendered titles. As the College of Surgeons moves towards greater equity and diversity, consideration should be given to phasing out the use of gendered titles, which serve to divide rather than unite our profession. © 2017 Royal Australasian College of Surgeons.

  15. 24 CFR 232.595 - Eligibility of title.

    Science.gov (United States)

    2010-04-01

    ... URBAN DEVELOPMENT MORTGAGE AND LOAN INSURANCE PROGRAMS UNDER NATIONAL HOUSING ACT AND OTHER AUTHORITIES MORTGAGE INSURANCE FOR NURSING HOMES, INTERMEDIATE CARE FACILITIES, BOARD AND CARE HOMES, AND ASSISTED... Fire Safety Equipment Title § 232.595 Eligibility of title. In order for the property which is to be...

  16. Title IX--Beyond Compliance to Personal Commitment and Leadership

    Science.gov (United States)

    Peterson, Barbara

    1976-01-01

    In order to move beyond legal compliance to real equality of opportunity, every educational leader must develop some systematic means of extending his or her personal knowledge and skills with respect to Title IX. Provides a check list for self evaluation of educational leaders and a guide for developing an implementation plan for Title IX.…

  17. Comprehensive Social Service Programs for Handicapped Citizens through Title XX.

    Science.gov (United States)

    Roten, Shelby Jean

    Reviewed are present and potential services and social programs for handicapped children in Mississippi through purchase of service contracts under Title XX of the Social Security Act. Sections cover the following topics: background and purpose of Title XX which gives states greater control over social service programs, planning state supported…

  18. Pocketguide to Title XX: Social Services to Children & Youth.

    Science.gov (United States)

    Mueller, Candace

    This brief guide to Title XX contains the following chapter headings: (1) Historical Overview of the Social Services Program, (2) The Provisions of Title XX at a Glance, (3) Implications for Services to Children and Youth, (4) The Planning Process, (5) Publication of the Proposed Plan and the Public Comment Period, (6) After the Final Plan is…

  19. A License for Bias: Sex Discrimination, Schools, and Title IX.

    Science.gov (United States)

    Morse, Susan Ed.

    This report discusses non-sports-related Title IX complaints filed with the Department of Education's Office for Civil Rights (OCR) from 1993-1997. Its purpose is to dispel the popular belief that Title IX is a sports-equity law and to determine the effectiveness of the legislation. The document examines the kinds of complaints filed, the status…

  20. 8 ỌZỌ TITLE: THE IGBOMAN'S ARISTOCRATIC INSTITUTION ...

    African Journals Online (AJOL)

    But money may not be the problem of all the people who are yet to take titles. Some may not like ... Stage One: Payment - In this, the intending ọzọ title holder pays a little sum of money to the alliance group in ..... Orji, M. O. (1999). The History ...

  1. Alternative Teacher Preparation Programs. Title II News You Can Use

    Science.gov (United States)

    Office of Postsecondary Education, US Department of Education, 2015

    2015-01-01

    Title II of the "Higher Education Act of 1965" ("HEA"), as amended in 2008 by the "Higher Education Opportunity Act," requires states to report annually on key elements of their teacher preparation programs and requirements for initial teacher credentialing, kindergarten through 12th grade. "Title II News You Can…

  2. 24 CFR 234.65 - Nature of title.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Nature of title. 234.65 Section 234.65 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued... OWNERSHIP MORTGAGE INSURANCE Eligibility Requirements-Individually Owned Units § 234.65 Nature of title. A...

  3. 24 CFR 1710.209 - Title and land use.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Title and land use. 1710.209... § 1710.209 Title and land use. (a) General information. (1) State whether the developer has reserved the... recording, submit a map which has been prepared to scale and which shows the proposed division of the land...

  4. The History, Uses, and Abuses of Title IX. 2016 Bulletin

    Science.gov (United States)

    American Association of University Professors, 2016

    2016-01-01

    This report, an evaluation of the history and current uses of Title IX, is the result of a joint effort by a subcommittee that included members of the AAUP's Committee A on Academic Freedom and Tenure and the Committee on Women in the Academic Profession. The report identifies tensions between current interpretations of Title IX and the academic…

  5. The Translation of Films: Sub-Titling versus Dubbing

    Science.gov (United States)

    Voge, Hans

    1977-01-01

    A study of film translation. Well-documented opinions are given on the advantages and disadvantages of both dubbing and sub-titling. One of the tentative conclusions is that sub-titling is to be preferred because it preserves the original dialogue and allows the audience verying degrees of comprehension. A bibliography is provided. (AMH)

  6. Delay and probability discounting among payday and title loan recipients.

    Science.gov (United States)

    Mahoney, Colin T; Lawyer, Steven R

    2016-04-01

    Payday and title loans are short-term loans associated with significant economic impact. Behavioral theories of impulsive choice may provide insight into behavioral processes that underlie the propensity to take out payday and title loans. Adults between the ages of 18 and 30 recruited from the community completed delay and probability discounting tasks for hypothetical money as well as measures of substance use. Patterns of discounting were characterized using a hyperbolic decay model and area under the curve. Participants who took out a payday and/or title loan in the past (n=41) exhibited more impulsive choice patterns on the delay discounting task than did those who did not (n=255). Substance use mediated this relationship between payday and title loan retention and delay discounting. These findings suggest potentially important relationships between payday/title loan borrowing, substance use, and delay discounting. Copyright © 2016 Elsevier B.V. All rights reserved.

  7. Improving the Quality of Cast Ingot for the Production of Defect-Free Rolled and Polished Blanks of Silver-Copper Coinage Alloy

    Science.gov (United States)

    Chakrabarti, Debalay; Chakrabarti, Ajit Kumar; Roy, Sanat Kumar

    2018-05-01

    The causes of defect generation in Ag-7.5 wt% Cu coinage alloy billets and in rolled and polished blanks were evaluated in this paper. Microstructural and compositional study of the as-cast billets indicated that excessive formation of gas-porosity and shrinkage cavity was responsible for crack formation during rolling. Carbon pick-up from charcoal flux cover used during melting, formation of CuS inclusions due to high-S content and rapid work-hardening also contributed to cracking during rolling. In order to prevent the defect generation, several measures were adopted. Those measures significantly reduced the defect generation and improved the surface luster of the trial rolled strips.

  8. SECTIONAL AREA CALCULATION OF MATERIAL REMOVED FROM BLANK WHILE FORMING SPACE BETWEEN TWO TEETH OF SATELLITE GEAR OF PLANETARY PIN TOOTH REDUCER

    Directory of Open Access Journals (Sweden)

    N. G. Yankevich

    2009-01-01

    Full Text Available One of the most important values while forming gear wheels is a material section area Sс which is to be removed by a tool in the process of forming a space between two teeth in one pass. Cutting resistance which is proportional  to section area of  the layer to be cut and, correspondingly, a thermodynamic intensity in the polishing zone depend on Sс value.The paper proposes relations for calculation of a material section area Sс which is to be removed from a blank while forming a space between two teeth of a satellite gear of a planetary pin tooth reducer.Measurements being made in the AutoCAD packet have shown that any corrections of the profile do not make a significant influence on a section area Sс.

  9. Procedure for independently estimating blanks and uncertainties for measured values of 90Sr and 137Cs concentrations in the Atlantic Ocean

    International Nuclear Information System (INIS)

    Kupferman, S.L.; Livingston, H.D.

    1979-01-01

    A procedure has been developed for independently estimating blanks and measurement uncertainties for measured values of 90 Sr and 137 CS concentrations in the Atlantic Ocean. The procedure depends on delineation of a region in the Atlantic Ocean which has never contained measurable quantities of these fission products. Such a region is defined. A simple model, with supporting data, is used to show that reported 137 Cs inventories in deep ocean sediments could have accumulated without ever raising concentrations of 137 Cs in this tracer-free volume above minimum detectable limits. Several examples are presented to show that the use of the procedure results in a substantial improvement in the quality of 90 Sr and 137 Cs data. The method is applicable to any laboratory that has determined 9 πSr and 137 Cs concentrations in samples collected from within the tracer-free volume. 10 refs

  10. Happy crisis tests hospitals' PR plan. Septuplets' arrival swamps Iowa hospitals with national, international media. Blank Children's Hospital, Iowa Methodist Medical Center, Des Moines.

    Science.gov (United States)

    1998-01-01

    The public relations staff believed the birth of healthy septuplets would become a human interest story for local media. But the staff was stunned at the outpouring of international and national media knocking at their front doors. The staff of both Iowa Methodist Medical Center and Blank Children's Hospital in Des Moines, Iowa, organized a communications plan for 14 official press conferences, constant updates to the media and a website to handle ongoing inquiries from the public. As a result, the story of the McCaughey septuplets was shown in more than 10,000 television stories around the world. The hospitals received more than 36,000 magazine and newspaper articles. The public relations staff not only fielded more than 2,000 phone calls in the days following the Nov. 19 birth, but more than 15 major networks parked their vehicles and satellite dishes in front of the hospital.

  11. Registry of Mineral and Petroleum Titles

    Energy Technology Data Exchange (ETDEWEB)

    Maclellan, I. M.; Kaizer, J. L.; McCulloch, P. D.; Ratcliffe, R.; Wenning, A. S. [Nova Scotia Dept. of Natural Resources, Halifax, NS (Canada)

    2000-07-01

    Activities of the Nova Scotia Registry of Mineral and Petroleum Titles are described, including statistical information about staking and mining activity in the province during 1999. In terms of activities, the Registry receives applications and issues licenses and leases for mineral and petroleum rights, receives statements of exploration expenditures and assessment reports that pertain to renewal of licenses and leases, maintains maps showing the disposition of lands under license or lease, and maintains a system of prospector registration. In addition, the Registry processes applications for underground gas storage rights and treasure trove rights and maintains a database of information concerning production and employment in Nova Scotia mines and quarries. At the end 1999 there were 230,660 hectares under exploration licence. Exploration expenditures, including engineering, economic and feasibility studies during 1999 totalled $4.2 million, mostly by junior mining companies searching for industrial mineral commodities. Mining activity during 1999 generated revenues of $340 million. Coal production dropped by 25 per cent, due mainly to the closure of the Phalen Mine. Gypsum production was up to 7.9 million tonnes; shipments of cement, barite and clay products also increased during 1999; salt production remained unchanged from 1998 with 842,000 tonnes. Production of construction aggregates totalled 10.6 million tonnes, down slightly from the year before. Mineral industry employment was roughly 2,500 persons, down by 24 per cent from 1998 levels, due primarily to the closure of the Phalen Mine.

  12. Immunogenicity and safety of high-dose hepatitis B vaccine among drug users: A randomized, open-labeled, blank-controlled trial.

    Science.gov (United States)

    Feng, Yongliang; Shi, Jing; Gao, Linying; Yao, Tian; Feng, Dan; Luo, Dan; Li, Zhansheng; Zhang, Yawei; Wang, Fuzhen; Cui, Fuqiang; Li, Li; Liang, Xiaofeng; Wang, Suping

    2017-06-03

    Due to the low uptake, adherence, and completion of vaccination among drug users, and their compromised immune responses to hepatitis B vaccination, the current practice of hepatitis B vaccination may not provide optimal protection. The aim of this study was to evaluate the immunogenicity and safety of 60 µg and 20 µg hepatitis B vaccines among drug users. A randomized, open-labeled, blank-controlled trial was conducted among drug users at 2 drug rehabilitation centers in China. The eligible participants were drug users who were serologically negative for the hepatitis B surface antigen (HBsAg) and the hepatitis B surface antibody (anti-HBs). Participants were randomized in a ratio of 1:1:1 to receive 20 µg (IM20 group) or 60 µg (IM60 group) of hepatitis B vaccine or blank control at months 0, 1, and 6, and followed at months 6, 7, and 12. Seroconversion rates of 94.7% and 92.6% were observed in IM20 and IM60 groups at month 7, and correspondingly decreased to 89.5% and 91.7% respectively at month 12. The IM60 group showed significantly higher geometric mean concentrations (GMCs) of anti-HBs (2022.5 and 676.7 mIU mL-1) than the IM20 group did (909.6 and 470.5 mIU mL-1) at months 7 and 12 (P B vaccines showed good immunogenicity among the drug users.

  13. [Modeling polarimetric BRDF of leaves surfaces].

    Science.gov (United States)

    Xie, Dong-Hui; Wang, Pei-Juan; Zhu, Qi-Jiang; Zhou, Hong-Min

    2010-12-01

    The purpose of the present paper is to model a physical polarimetric bidirectional reflectance distribution function (pBRDF), which can character not only the non-Lambertian but also the polarized features in order that the pBRDF can be applied to analyze the relationship between the degree of polarization and the physiological and biochemical parameters of leaves quantitatively later. Firstly, the bidirectional polarized reflectance distributions from several leaves surfaces were measured by the polarized goniometer developed by Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences. The samples of leaves include two pieces of zea mays L. leaves (young leaf and mature leaf) and a piece of E. palcherrima wild leaf. Non-Lambertian characteristics of directional reflectance from the surfaces of these three leaves are obvious. A Cook-Torrance model was modified by coupling the polarized Fresnel equations to simulate the bidirectional polarized reflectance properties of leaves surfaces. The three parameters in the modified pBRDF model, such as diffuse reflectivity, refractive index and roughness of leaf surface were inversed with genetic algorithm (GA). It was found that the pBRDF model can fit with the measured data well. In addition, these parameters in the model are related with both the physiological and biochemical properties and the polarized characteristics of leaves, therefore it is possible to build the relationships between them later.

  14. A novel strategy for preparing calibration standards for the analysis of plant materials by laser-induced breakdown spectroscopy: A case study with pellets of sugar cane leaves

    Energy Technology Data Exchange (ETDEWEB)

    Silva Gomes, Marcos da [Universidade de São Paulo, Centro de Energia Nuclear na Agricultura (CENA), Laboratório de Química Analítica, Caixa Postal 96, CEP 13416-000, Piracicaba, SP (Brazil); Universidade Federal de São Carlos, Departamento de Química, Rodovia Washington Luiz km 235, São Carlos, SP (Brazil); Gustinelli Arantes de Carvalho, Gabriel [Universidade de São Paulo, Centro de Energia Nuclear na Agricultura (CENA), Laboratório de Química Analítica, Caixa Postal 96, CEP 13416-000, Piracicaba, SP (Brazil); Santos, Dário [Universidade Federal de São Paulo, Departamento de Ciências Exatas e da Terra, Rua Professor Arthur Riedel 275, Diadema, SP (Brazil); Krug, Francisco José, E-mail: fjkrug@cena.usp.br [Universidade de São Paulo, Centro de Energia Nuclear na Agricultura (CENA), Laboratório de Química Analítica, Caixa Postal 96, CEP 13416-000, Piracicaba, SP (Brazil)

    2013-08-01

    Calibration is still a challenging task when dealing with the direct analysis of solids. This is particularly true for laser-induced breakdown spectroscopy (LIBS), and laser ablation inductively coupled plasma optical emission spectrometry/mass spectrometry, when the calibrations are matrix-dependent and/or appropriate certified reference materials are generally not available. Looking at the analysis of plant materials in the form of pressed pellets by LIBS, a new method to overcome and/or minimize this difficulty is proposed by keeping the matrix constant in order to produce matrix-matched calibration pellets. To achieve this goal and to test this novel approach, ground sugar cane leaves were chosen and submitted to acid extractions for obtaining the corresponding blank or a material containing very low concentrations of the analytes. The resulting dried solid material was used either as a blank or a low concentration standard, and also homogeneously mixed with the original plant material at appropriate ratios as well. The corresponding pellets were used as calibration standards and ablated at 30 different sites by applying 25 laser pulses per site with a Q-switched Nd:YAG at 1064 nm. The plasma emission collected by lenses was directed through an optical fiber towards a spectrometer equipped with Echelle optics and intensified charge-coupled device. Delay time and integration time gate were fixed at 2.0 and 5.0 μs, respectively. This calibration strategy was tested for the determination of Ca, Mg, K, P, Cu, Mn, and Zn by LIBS in pellets of leaves from 17 varieties of sugar cane and good correlations were obtained with inductively coupled plasma optical emission spectrometry results in the corresponding acid digests. The proposed approach was also useful to estimate the limits of detection based on measurements of blanks, as recommended by IUPAC, or with the aid of a low concentration standard. - Highlights: • Blanks and/or low concentration standards of plant

  15. Influence of maternity leave on exclusive breastfeeding.

    Science.gov (United States)

    Monteiro, Fernanda R; Buccini, Gabriela Dos S; Venâncio, Sônia I; da Costa, Teresa H M

    To describe the profile of women with children aged under 4 months living in the Brazilian state capitals and in the Federal District according to their working status and to analyze the influence of maternity leave on exclusive breastfeeding (EBF) among working women. This was a cross-sectional study with data extracted from the II National Maternal Breastfeeding Prevalence Survey carried out in 2008. Initially, a descriptive analysis of the profile of 12,794 women was performed, according to their working status and maternity leave and the frequency of maternity leave in the Brazilian regions and capitals. The study used a multiple model to identify the influence of maternity leave on EBF interruption, including 3766 women who declared they were working and were on maternity leave at the time of the interview. The outcome assessed in the study was the interruption of the EBF, classified by the WHO. Regarding the working status of the mothers, 63.4% did not work outside of their homes and among those who worked, 69.8% were on maternity leave. The largest prevalence among workers was of women older than 35 years of age, with more than 12 years of schooling, primiparous and from the Southeast and South regions. The lack of maternity leave increased by 23% the chance of EBF interruption. Maternity leave contributed to increase the prevalence of EBF in the Brazilian states capitals, supporting the importance of increasing the maternity leave period from four to six months. Copyright © 2017 Sociedade Brasileira de Pediatria. Published by Elsevier Editora Ltda. All rights reserved.

  16. Influence of maternity leave on exclusive breastfeeding

    Directory of Open Access Journals (Sweden)

    Fernanda R. Monteiro

    Full Text Available Abstract Objectives: To describe the profile of women with children aged under 4 months living in the Brazilian state capitals and in the Federal District according to their working status and to analyze the influence of maternity leave on exclusive breastfeeding (EBF among working women. Methods: This was a cross-sectional study with data extracted from the II National Maternal Breastfeeding Prevalence Survey carried out in 2008. Initially, a descriptive analysis of the profile of 12,794 women was performed, according to their working status and maternity leave and the frequency of maternity leave in the Brazilian regions and capitals. The study used a multiple model to identify the influence of maternity leave on EBF interruption, including 3766 women who declared they were working and were on maternity leave at the time of the interview. The outcome assessed in the study was the interruption of the EBF, classified by the WHO. Results: Regarding the working status of the mothers, 63.4% did not work outside of their homes and among those who worked, 69.8% were on maternity leave. The largest prevalence among workers was of women older than 35 years of age, with more than 12 years of schooling, primiparous and from the Southeast and South regions. The lack of maternity leave increased by 23% the chance of EBF interruption. Conclusion: Maternity leave contributed to increase the prevalence of EBF in the Brazilian states capitals, supporting the importance of increasing the maternity leave period from four to six months.

  17. Maternity and family leave policies in rural family practices.

    Science.gov (United States)

    Mainguy, S; Crouse, B J

    1998-09-01

    To help recruit and retain physicians, especially women, rural family practice groups need to establish policies regarding maternity and other family leaves. Also important are policies regarding paternity leave, adoptive leave, and leave to care for elderly parents. We surveyed members of the American Academy of Family Physicians in rural practice in 1995 to assess the prevalence of leave policies, the degree to which physicians are taking family leave, and the characteristics of ideal policies. Currently, both men and women physicians are taking family leaves of absence, which indicates a need for leave policies. Furthermore, a lack of family leave policies may deter women from entering rural practice.

  18. Labour Supply Responses to Paid Parental Leave

    OpenAIRE

    Karimi, Arizo; Lindahl, Erica; Skogman Thoursie, Peter

    2012-01-01

    Women account for the majority of parental leave take-up, which is likely one of the major reasons for the gender gap in income and wages. Consequently, many countries exert effort to promote a more gender equal division of parental leave. Indeed, the last decades have seen an increase in fathers' take-up of parental leave benefits, but the gender earnings gap has remained fairly constant. In this paper we re-evaluate the labour supply responses of both mothers and fathers to three major refo...

  19. Late adolescents' conceptualizations of home-leaving.

    Science.gov (United States)

    Moore, D; Hotch, D F

    1981-02-01

    Separation from the family, a key developmental task, has received scant attention from developmentalists. In this study, college students' dissimilarity ratings and ratings on 22 bipolar adjective scales were obtained for a set of 20 definitions of home-leaving. Results of a cluster analysis revealed that conceptualizations of the definitions are organized in terms of eight clusters. Ratings on the 22 adjective scales provided an empirical means for interpreting the typological structure of the home-leaving definitions. Convergence the results of this inductive study of home-leaving and elements of ego development theory was noted.

  20. Laser induced fluorescence of some plant leaves

    International Nuclear Information System (INIS)

    Helmi, M.S.; Mohamed, M.M.; Amer, R.; Elshazly, O.; Elraey, M.

    1992-01-01

    Laser induced fluorescence (LIF) is successfully used as a technique for remote detection of spectral characteristics of some plants. A pulsed nitrogen laser at 337.1 nm is used to excite cotton, corn and rice leaves. The fluorescence spectrum is detected in the range from 340 nm to 820 nm. It is found that, these plant leaves have common fluorescence maxima at 440 nm, 685 nm and 740 nm. plant leaves are also found to be identifiable by the ratio of the fluorescence intensity at 440 nm to that at 685 nm. The present technique can be further used as a means of assessing, remotely, plant stresses. 5 fig

  1. Fathers' Leave, Fathers' Involvement and Child Development

    DEFF Research Database (Denmark)

    del Carmen Huerta, Maria; Lausten, Mette; Baxter, Jennifer

    involved’ perform better during the early years than their peers with less involved fathers. This paper analyses data of four OECD countries — Australia; Denmark; United Kingdom; United States — to describe how leave policies may influence father’s behaviours when children are young and whether...... their involvement translates into positive child cognitive and behavioural outcomes. This analysis shows that fathers’ leave, father’s involvement and child development are related. Fathers who take leave, especially those taking two weeks or more, are more likely to carry out childcare related activities when...

  2. 78 FR 8833 - The Family and Medical Leave Act

    Science.gov (United States)

    2013-02-06

    ... creates a new qualifying exigency leave category for parental care. In military caregiver leave, the Final... covered employers to take job- protected, unpaid leave, or to substitute appropriate accrued paid leave... CFR Part 825 The Family and Medical Leave Act; Final Rule #0;#0;Federal Register / Vol. 78 , No. 25...

  3. 5 CFR 630.906 - Transfer of annual leave.

    Science.gov (United States)

    2010-01-01

    ... employing agency may not be sufficient to meet the needs of the leave recipient; or (3) In the judgment of... specified leave recipient. Except as provided in paragraph (f) of this section, annual leave may be transferred only to a leave recipient employed by the leave donor's employing agency. (b) Except as provided...

  4. Inscribing Authority: Female Title Bearers in Jewish Inscriptions

    Directory of Open Access Journals (Sweden)

    Carrie Duncan

    2012-02-01

    Full Text Available This paper investigates representations of gender in the material culture of the ancient synagogue. The pertinent data are numerous dedicatory and funerary inscriptions linking individual Jews, men and women, with titles seemingly associated with leadership in Late Antique synagogues (ca. 200–600 CE. Bernadette Brooten’s influential 1982 monograph argued against the prevailing tendency to characterize these titles as indications of power, authority, and responsibility when associated with men but as meaningless flattery when applied to women. She suggests that synagogue titles denote power, authority and responsibility on all title bearers equally, both men and women. I question the continued utility of proffering female title-holders as enumerable examples of powerful women rescued from their forgotten place in history. Using theoretical insights developed by historians Elizabeth Clark and Gabrielle Spiegel, this paper will engage a comparative analysis with the work of Riet van Bremen and Saba Mahmood to develop new methods of conceptualizing women’s authority in early Jewish communities. I propose that viewing women’s synagogue titles as culturally constructed representations allows for a fruitful inquiry into how women’s titles were used by male-dominated synagogue communities in their self-articulation and public presentation of Judaism.

  5. Maternity leave, women's employment, and marital incompatibility.

    Science.gov (United States)

    Hyde, J S; Essex, M J; Clark, R; Klein, M H

    2001-09-01

    This research investigated the relationship between the length of women's maternity leave and marital incompatibility, in the context of other variables including the woman's employment, her dissatisfaction with the division of household labor, and her sense of role overload. Length of leave, work hours, and family salience were associated with several forms of dissatisfaction, which in turn predicted role overload. Role overload predicted increased marital incompatibility for experienced mothers but did not for first-time mothers, for whom discrepancies between preferred and actual child care were more important. Length of maternity leave showed significant interactions with other variables, supporting the hypothesis that a short leave is a risk factor that, when combined with another risk factor, contributes to personal and marital distress.

  6. Tomato leaves methanol extract possesses anti- inflammatory ...

    African Journals Online (AJOL)

    GREGORY

    2011-12-16

    Dec 16, 2011 ... demonstrated, the anti-inflammatory effect of tomato leaves and its associated molecular mechanisms have not yet .... dissolved in 10% of culture-grade dimethylsulfoxide (DMSO; Sigma-. Aldrich .... In Vitro Cell. Dev. Biol.

  7. 5 CFR 630.1111 - Limitation on the amount of donated annual leave received by an emergency leave recipient.

    Science.gov (United States)

    2010-01-01

    ... needs of individual emergency leave recipients, an employing agency may allow an employee to receive... annual leave received by an emergency leave recipient. 630.1111 Section 630.1111 Administrative Personnel... recipient. An emergency leave recipient may receive a maximum of 240 hours of donated annual leave at any...

  8. On the Motion of Falling Leaves

    OpenAIRE

    Razavi, Pedram

    2010-01-01

    This paper investigates the motion of falling leaves through modeling using papers and the corresponding data collected from more than four thousands experiments. Two series of experiments were designed in order to study the relationship between different parameters which can affect different paths of motion in leaves. In the first series of experiments, the shapes of the potential paths that falling papers can take were investigated as a whole. A new classification scheme was derived from th...

  9. Do parents leave a smaller carbon footprint?

    DEFF Research Database (Denmark)

    Nordström, Leif Jonas; Shogren, Jason F.; Thunström, Linda

    Do parents leave a smaller carbon footprint? While becoming a parent is transformational as one focuses more on the future, the time constraints are more binding right now. Using a unique data set that allows us to compare CO2 emissions from Swedish two-adult households with and without children......, we find becoming a Swedish parent causes a person to leave a larger carbon ootprint—due to changes in transportation patterns and food consumption choices....

  10. Intra-Household Allocation of Parental Leave

    OpenAIRE

    Gobbi, Paula Eugenia; Parys, Juliane; Schwerhoff, Gregor

    2015-01-01

    We introduce childcare sharing in a collective model of household behavior to investigate which factors make spouses increase or decrease their share of parental leave. The concern about future consumption motivates parents to invest in their human capital and to limit their leave duration. Using relative income and the age difference between spouses as distribution factors, we cannot reject Pareto efficiency in childcare sharing. Higher relative incomes and larger age differences shift the c...

  11. Regionally Applied Research Efforts (RARE) Report titled " ...

    Science.gov (United States)

    The traditional methodology for health risk assessment used by the U. S. Environmental Protection Agency (EPA) is based on the use of exposure assumptions (e.g. exposure duration, food ingestion rate, body weight, etc.) that represent the entire American population, either as a central tendency exposure (e.g. average, median) or as a reasonable maximum exposure (e.g. 95% upper confidence limit). Unfortunately, EPA lacked exposure information for assessing health risks for New England regional tribes sustaining a tribal subsistence way of life. As a riverine tribe, the Penobscot culture and traditions are inextricably tied to the Penobscot River watershed. It is through hunting, fishing, trapping, gathering and making baskets, pottery, moccasins, birch-bark canoes and other traditional practices that the Penobscot culture and people are sustained. The Penobscot River receives a variety of pollutant discharges leaving the Penobscot Indian Nation (PIN) questioning the ecological health and water quality of the river and how this may affect the practices that sustain their way of life. The objectives of this Regional Applied Research Effort (RARE) study were to: (1) Develop culturally sensitive methodologies for assessing the potential level of exposure to contaminants that Penobscot Indian Nation tribal members may have from maintaining tribal sustenance practices; (2) Conduct field surveys and laboratory analysis on targeted flora and fauna for chemical expo

  12. Properties of leaves particleboard for sheathing application

    Science.gov (United States)

    Nuryawan, Arif; Rahmawaty

    2018-03-01

    Manufacturing particleboard (PB) made of leaves was carried out to make non-structural building components, such as insulation, partition, wall, and sheathing. Raw materials used dry leaves originated from plantation (palm oil leaves) and forest plantation (magahony leaves). The adhesive used was interior type thermosetting commercial resins, namely 10% urea-formaldehyde (UF) based on oven dry leaves. Hardener used for UF resin was 1% and 3% ammonium chloride (NH4Cl) 20% (w/w), respectively. Technically, the target density of PB was 0.8 g/cm3 with the dimension’s size of (250 x 250 x 10) mm3. The pressure, temperature, and time of pressing of the hot press were 25 kgf/cm2, 120C, and 10 minutes, respectively. After conditioning for one week, the PB then was evaluated their physical and mechanical properties according to Japanese Industrial Standard (JIS) A 5908 (2003). Results of this work showed: 1) Both types of PB (palm oil and mahagony leaves) were feasible to be produced for non-structural applications; 2) Addition of hardener enhanced the physical and mechanical properties of PB; 3) It was recommended to enhance the performance of the PB by manipulation of the raw materials and the design.

  13. Short-Term Saved Leave Scheme

    CERN Multimedia

    2007-01-01

    As announced at the meeting of the Standing Concertation Committee (SCC) on 26 June 2007 and in http://Bulletin No. 28/2007, the existing Saved Leave Scheme will be discontinued as of 31 December 2007. Staff participating in the Scheme will shortly receive a contract amendment stipulating the end of financial contributions compensated by save leave. Leave already accumulated on saved leave accounts can continue to be taken in accordance with the rules applicable to the current scheme. A new system of saved leave will enter into force on 1 January 2008 and will be the subject of a new implementation procedure entitled "Short-term saved leave scheme" dated 1 January 2008. At its meeting on 4 December 2007, the SCC agreed to recommend the Director-General to approve this procedure, which can be consulted on the HR Department’s website at the following address: https://cern.ch/hr-services/services-Ben/sls_shortterm.asp All staff wishing to participate in the new scheme a...

  14. Short-Term Saved Leave Scheme

    CERN Multimedia

    HR Department

    2007-01-01

    As announced at the meeting of the Standing Concertation Committee (SCC) on 26 June 2007 and in http://Bulletin No. 28/2007, the existing Saved Leave Scheme will be discontinued as of 31 December 2007. Staff participating in the Scheme will shortly receive a contract amendment stipulating the end of financial contributions compensated by save leave. Leave already accumulated on saved leave accounts can continue to be taken in accordance with the rules applicable to the current scheme. A new system of saved leave will enter into force on 1 January 2008 and will be the subject of a new im-plementation procedure entitled "Short-term saved leave scheme" dated 1 January 2008. At its meeting on 4 December 2007, the SCC agreed to recommend the Director-General to approve this procedure, which can be consulted on the HR Department’s website at the following address: https://cern.ch/hr-services/services-Ben/sls_shortterm.asp All staff wishing to participate in the new scheme ...

  15. Office design's impact on sick leave rates.

    Science.gov (United States)

    Bodin Danielsson, Christina; Chungkham, Holendro Singh; Wulff, Cornelia; Westerlund, Hugo

    2014-01-01

    The effect of office type on sickness absence among office employees was studied prospectively in 1852 employees working in (1) cell-offices; (2) shared-room offices; (3) small, (4) medium-sized and (5) large open-plan offices; (6) flex-offices and (7) combi-offices. Sick leaves were self-reported two years later as number of (a) short and (b) long (medically certified) sick leave spells as well as (c) total number of sick leave days. Multivariate logistic regression analysis was used, with adjustment for background factors. A significant excess risk for sickness absence was found only in terms of short sick leave spells in the three open-plan offices. In the gender separate analysis, this remained for women, whereas men had a significantly increased risk in flex-offices. For long sick leave spells, a significantly higher risk was found among women in large open-plan offices and for total number of sick days among men in flex-offices. A prospective study of the office environment's effect on employees is motivated by the high rates of sick leaves in the workforce. The results indicate differences between office types, depending on the number of people sharing workspace and the opportunity to exert personal control as influenced by the features that define the office types.

  16. A MODELING METHOD OF FLUTTERING LEAVES BASED ON POINT CLOUD

    OpenAIRE

    J. Tang; Y. Wang; Y. Zhao; Y. Zhao; W. Hao; X. Ning; K. Lv; Z. Shi; M. Zhao

    2017-01-01

    Leaves falling gently or fluttering are common phenomenon in nature scenes. The authenticity of leaves falling plays an important part in the dynamic modeling of natural scenes. The leaves falling model has a widely applications in the field of animation and virtual reality. We propose a novel modeling method of fluttering leaves based on point cloud in this paper. According to the shape, the weight of leaves and the wind speed, three basic trajectories of leaves falling are defined, which ar...

  17. Statistics On Title II Direct Payments To Claimant Representatives

    Data.gov (United States)

    Social Security Administration — Every person has the right to be represented by an attorney or other representative while pursuing a claim or other rights. This dataset contains data around Title...

  18. 32 CFR 644.63 - Contracting for title evidence.

    Science.gov (United States)

    2010-07-01

    ... law and the State canons of legal ethics prohibit attorneys from engaging in competitive bidding for..., with the concurrence of the Chief Counsel or his designee. (c) Forms to be used. When purchasing title...

  19. Constructing a unitary title regime for the European Patent System

    NARCIS (Netherlands)

    Rodriguez, V.F.

    2011-01-01

    The European Patent System without any unitary title allows Member States to retain institutional arrangements within their borders and to prevent any moves to delegate responsibility outside the national sphere. This intergovernmental patent regime suffers from fragmentation due to national

  20. WORLD TITLE BOXING: FROM EARLY BEGINNINGS TO THE FIRST BELL

    Directory of Open Access Journals (Sweden)

    Marc Ramsay

    2009-11-01

    Full Text Available There is scant literature where applied sport scientists have considered first hand experiences preparing professional boxers for world title bouts. The present submission reflects more than 10 years of applied experience working with professional boxers, residing in Canada. What follows is a composite of sequential steps that ownership and coaching staff of one Canadian management group have tried leading up to more than 20 world title bout experiences. The strategies proposed have been built progressively over time, and what follows is a general overview of a more detailed pre-bout structure from shortly in advance of a world title bout offer to the moment when the athlete enters the ring to perform. We propose that an effective structure is founded upon detailed a priori preparation, tactical decisions throughout bout preparation, and a thorough understanding by the athlete of what he will encounter during the title bout

  1. Legal Forum: Title IX: Does It Apply to Employees?

    Science.gov (United States)

    McCarthy, Martha

    1981-01-01

    Briefly reviews a number of Federal court cases that have dealt with Title IX, considering the issue of whether the 1974 regulations prohibiting sex discrimination in employment practices accurately reflect the intent of the 1972 law. (GC)

  2. Energy information data base. Serial titles, February 1978--June 1979

    International Nuclear Information System (INIS)

    1979-06-01

    This supplement contains changes and additions to TID-4579-R10 (the authority list for serial titles used by TIC), and is intended to be used with that publication. Supplements are cumulative until another revision is issued

  3. ["Paternity leave"? Retrospective view on a delayed reform of maternity leave in Austria].

    Science.gov (United States)

    Munz, R

    1984-01-01

    Only 1 of 3 Austrian fathers involves himself daily in child rearing, and the younger the children, the less likely he is to be involved. Austria is among those European countries with the greatest pregnancy benefits. New mothers may take up to 1 year of paid maternity leave without fear of losing their jobs. This article uses 1982 Institute of Demography survey data to determine support for similar paternity leave for fathers. In the last few years, both Social Democrat and Conservative women have worked for this leave, although the movement has also found opposition by women in trade unions, as well as from conservative groups. Survey results show that 46% of married Austrian women, under age 40, favor paternity leave; 1 or 4 women can imagine their husbands taking such leave. Among husbands, 34% favored the leave option, and 1 of 4 could imagine taking the leave for a least part of the baby's first year. The study attempts to identify those husbands most likely to take advantage of paternity leave. At present, most men will not choose to stay with their children at the expense of earnings reduction. Compensation reforms for both mothers and fathers must first occur before men and women in a position to make real decisions on maternity and paternity leave.

  4. Aplicación del láser de diodo para la soldadura en tailored blanks

    Directory of Open Access Journals (Sweden)

    Bocos, J. L.

    2004-04-01

    Full Text Available During the last years, one of the most interesting subjects in the automotive industry is the weight reduction of the automobile, and so to diminish the fuel consumption. Among other performances, the use in the body car of materials which have high mechanical resistance must be considered for the weight reduction of the automobile and maintaining high benefits. In this work, it has been studied the utilization of the diode laser for high resistance steel sheets welding, concretely microalloying steels (ZStE, DP "dual phase" and TRIP "transformation induced plasticity". These steels can be employed in "tailored blanks", which are defined as two or more separate pieces of flat material of dissimilar thickness and/or physical properties joined together before forming, to provide superior qualities in the finished stamped part. In this study, the metallographic characterization has been realised in the welding seams; and the mechanical behaviour has been analysed employing the following tests: microhardness, drawing, tensile and fatigue.

    Uno de los puntos de mayor interés para la industria de la automoción, en los últimos años, es la reducción en peso del automóvil y conseguir, con ello, rebajar el consumo de combustible. Disminuir el peso del automóvil y mantener unas elevadas prestaciones implica, entre otras actuaciones, la utilización de materiales en la carrocería que posean una elevada resistencia mecánica. En este trabajo se presenta el estudio de la viabilidad de la utilización del láser de diodo para la soldadura de chapas de acero de alta resistencia; concretamente de aceros ferríticos microaleados (ZStE, DP (dual phase y TRIP (transformation induced plasticity. Todos ellos, son materiales que pueden formar parte de tailored blanks que se definen como piezas constituidas por la unión, mediante soldadura, de chapas de acero de distintas calidades y espesores. En este estudio se ha profundizado en

  5. Studying of Salinity Stress Effect on Germination, Proline, Sugar, Protein, Lipid and Chlorophyll Content in Purslane (Portulaca oleracea L. Leaves

    Directory of Open Access Journals (Sweden)

    Parvaneh Rahdari

    2012-04-01

    Full Text Available Approximately 30% of country regions are under influence of salt and one of the main important methods for increasing of hectare performance in salt soils, using of resistant plant against with salt such as medicinal annual plant of Purslane (Portulaca oleraceae L..Studying of the salt stress effect on germination and some physiological parameters in Purslane was carried out in completely random framework and with three replications and under controlled conditions. In this study, salinity was imposed by sodium chloride (NaCl and in five levels of framework included of Control (distilled water, 50, 100, 150 and 200 Mmol from NaCl. Studied physiological parameters included of proline, sugar, protein, lipid and chlorophyll in Purslane leaves.In relation with observed germination that increasing of salt level, germination rate was reduced that the least germination rate in 200 Mmol and the highest germination was observed in control which in statistical level 0.01 showed meaningful difference. Also, results showed an increasing of leaf proline and sugar that was synchronize with increasing of sodium chloride, this increasing in statistical level of P<0.01 was meaningful, while blank had the least rate and salt level 200 Mmol was observed. Synchronize with increasing of salinity level, lipid and protein concentration decreasing that was meaningful (P<0.01 which highest of leaf lipid and protein content in control level and least concentration was observed in 200 Mmol of salinity level. Also, salinity stress due to increasing of chlorophyll a and b levels in Purslane leaves which this increasing in leaf chlorophyll b concentrations in 0.01 statistical level was meaningful and the least level chlorophyll a and b in blank and the highest level of chlorophyll a and b by order in 150 and 200 Mmol of NaCl was observed. The results showed that plant for resistance against salinity increasing of proline, sugar and chlorophyll content in leaves are useful for

  6. Leaving the Hospital Against Medical Advice Among People Who Use Illicit Drugs: A Systematic Review

    Science.gov (United States)

    Ti, Lianlian

    2015-01-01

    from psychiatric hospitals, drug treatment centers and emergency departments, and studies that discussed misuse of alcohol but not illicit drugs. Data collection and analysis. We created an electronic database that included study abstracts and relevant information matching the keywords and search criteria. We reviewed potentially eligible articles independently by scanning the titles, abstracts, and full texts of articles after removing duplicates. We identified studies for which eligibility was unclear and decided which studies to include after thoroughly reviewing and discussing them. Results. Of the 1649 studies that matched the search criteria, 17 met our inclusion criteria. Thirteen studies identified substance misuse as a significant predictor of leaving the hospital against medical advice. Three studies assessed the prevalence and predictors of leaving the hospital against medical advice among people who inject drugs and found that this phenomenon was commonly reported (prevalence range = 25%–30%). Factors positively associated with leaving the hospital against medical advice included recent injection drug use, Aboriginal ancestry, leaving on weekends and welfare check day. In-hospital methadone use, social support, older age, and admission to a community-based model of care were negatively associated with the outcome. Conclusions. To better understand risk factors associated with leaving the hospital against medical advice among PWUD, future research should consider the effect of individual, social, and structural characteristics on leaving the hospital against medical advice among PWUD. The development and evaluation of novel methods to address interventions to reduce the rate of leaving the hospital prematurely is necessary. PMID:26469651

  7. What is the title of a Web page? A study of Webography practice

    Directory of Open Access Journals (Sweden)

    Timothy C. Craven

    2002-01-01

    Full Text Available Few style guides recommend a specific source for citing the title of a Web page that is not a duplicate of a printed format. Sixteen Web bibliographies were analyzed for uses of two different recommended sources: (1 the tagged title; (2 the title as it would appear to be from viewing the beginning of the page in the browser (apparent title. In all sixteen, the proportion of tagged titles was much less than that of apparent titles, and only rarely did the bibliography title match the tagged title and not the apparent title. Convenience of copying may partly explain the preference for the apparent title. Contrary to expectation, correlation between proportion of valid links in a bibliography and proportion of accurately reproduced apparent titles was slightly negative.

  8. Project of Economically Profitable Technological Process of Production of Rotor and Stator Plates of Inductive Position Sensor by Blanking and Roll Bending

    Directory of Open Access Journals (Sweden)

    Radek ČADA

    2013-12-01

    Full Text Available Paper concerns innovation of production of rotor and stator plates of inductive position sensors which are used at automatization of production processes. Authors analyse possibility of efficiency improvement of production of these devices in joint-stock company TES VSETÍN and suggest concrete solving of new production technology. Composition of production line for blanking and roll bending of rotor and stator plates of inductive position sensor from individual technological devices was suggested: decoiler, straightening device, actuating belt feeder, pneumatic shears with inclined tools, belt conveyer and four cylinders bending rolls. Construction of production line was projected in order to its operation can be secured by one production workman, which controls and chooses operation of CNC programme, takes separate roll bended rotor and stator plates of inductive position sensor from bending rolls and according to required technological procedure he composes them to rotor and stator complexes. Construction of production line was projected so that it is possible to move it by crane without necessity to dismantle and subsequently to put together and adjust the line.

  9. Penetrating chest trauma caused by a blank cartridge actuated rubber ball projectile: case presentation and ballistic investigation of an uncommon weapon type.

    Science.gov (United States)

    Frank, Matthias; Peters, Dieter; Klemm, Wolfram; Grossjohann, Rico; Ekkernkamp, Axel; Bockholdt, Britta; Seifert, Julia

    2017-09-01

    Recently, an increasing number of an uncommon weapon type based on a caliber 6-mm Flobert blank cartridge actuated revolver which discharges 10-mm-diameter rubber ball projectiles has been confiscated by police authorities following criminal offenses. A recent trauma case presenting with a penetrating chest injury occasioned an investigation into the basic ballistic parameters of this type of weapon. Kinetic energy E of the test projectiles was calculated between 5.8 and 12.5 J. Energy density ED of the test projectiles was close to or higher than the threshold energy density of human skin. It can be concluded that penetrating skin injuries due to free-flying rubber ball projectiles discharged at close range cannot be ruled out. However, in case of a contact shot, the main injury potential of this weapon type must be attributed to the high energy density of the muzzle gas jet which may, similar to well-known gas or alarm weapons, cause life-threatening or even lethal injuries.

  10. Experimental evaluation of tool wear throughout a continuous stroke blanking process of quenched 22MnB5 ultra-high-strength steel

    Science.gov (United States)

    Vogt, S.; Neumayer, F. F.; Serkyov, I.; Jesner, G.; Kelsch, R.; Geile, M.; Sommer, A.; Golle, R.; Volk, W.

    2017-09-01

    Steel is the most common material used in vehicles’ chassis, which makes its research an important topic for the automotive industry. Recently developed ultra-high-strength steels (UHSS) provide extreme tensile strength up to 1,500 MPa and combine great crashworthiness with good weight reduction potential. However, in order to reach the final shape of sheet metal parts additional cutting steps such as trimming and piercing are often required. The final trimming of quenched metal sheets presents a huge challenge to a conventional process, mainly because of the required extreme cutting force. The high cutting impact, due to the materials’ brittleness, causes excessive tool wear or even sudden tool failure. Therefore, a laser is commonly used for the cutting process, which is time and energy consuming. The purpose of this paper is to demonstrate the capability of a conventional blanking tool design in a continuous stroke piercing process using boron steel 22MnB5 sheets. Two different types of tool steel were tested for their suitability as active cutting elements: electro-slag remelted (ESR) cold work tool steel Bohler K340 ISODUR and powder-metallurgic (PM) high speed steel Bohler S390 MICROCLEAN. A FEM study provided information about an optimized punch design, which withstands buckling under high cutting forces. The wear behaviour of the process was assessed by the tool wear of the active cutting elements as well as the quality of cut surfaces.

  11. Nutrient and pesticide contamination bias estimated from field blanks collected at surface-water sites in U.S. Geological Survey Water-Quality Networks, 2002–12

    Science.gov (United States)

    Medalie, Laura; Martin, Jeffrey D.

    2017-08-14

    Potential contamination bias was estimated for 8 nutrient analytes and 40 pesticides in stream water collected by the U.S. Geological Survey at 147 stream sites from across the United States, and representing a variety of hydrologic conditions and site types, for water years 2002–12. This study updates previous U.S. Geological Survey evaluations of potential contamination bias for nutrients and pesticides. Contamination is potentially introduced to water samples by exposure to airborne gases and particulates, from inadequate cleaning of sampling or analytic equipment, and from inadvertent sources during sample collection, field processing, shipment, and laboratory analysis. Potential contamination bias, based on frequency and magnitude of detections in field blanks, is used to determine whether or under what conditions environmental data might need to be qualified for the interpretation of results in the context of comparisons with background levels, drinking-water standards, aquatic-life criteria or benchmarks, or human-health benchmarks. Environmental samples for which contamination bias as determined in this report applies are those from historical U.S. Geological Survey water-quality networks or programs that were collected during the same time frame and according to the same protocols and that were analyzed in the same laboratory as field blanks described in this report.Results from field blanks for ammonia, nitrite, nitrite plus nitrate, orthophosphate, and total phosphorus were partitioned by analytical method; results from the most commonly used analytical method for total phosphorus were further partitioned by date. Depending on the analytical method, 3.8, 9.2, or 26.9 percent of environmental samples, the last of these percentages pertaining to all results from 2007 through 2012, were potentially affected by ammonia contamination. Nitrite contamination potentially affected up to 2.6 percent of environmental samples collected between 2002 and 2006 and

  12. Design optimization of tailor-rolled blank thin-walled structures based on ɛ-support vector regression technique and genetic algorithm

    Science.gov (United States)

    Duan, Libin; Xiao, Ning-cong; Li, Guangyao; Cheng, Aiguo; Chen, Tao

    2017-07-01

    Tailor-rolled blank thin-walled (TRB-TH) structures have become important vehicle components owing to their advantages of light weight and crashworthiness. The purpose of this article is to provide an efficient lightweight design for improving the energy-absorbing capability of TRB-TH structures under dynamic loading. A finite element (FE) model for TRB-TH structures is established and validated by performing a dynamic axial crash test. Different material properties for individual parts with different thicknesses are considered in the FE model. Then, a multi-objective crashworthiness design of the TRB-TH structure is constructed based on the ɛ-support vector regression (ɛ-SVR) technique and non-dominated sorting genetic algorithm-II. The key parameters (C, ɛ and σ) are optimized to further improve the predictive accuracy of ɛ-SVR under limited sample points. Finally, the technique for order preference by similarity to the ideal solution method is used to rank the solutions in Pareto-optimal frontiers and find the best compromise optima. The results demonstrate that the light weight and crashworthiness performance of the optimized TRB-TH structures are superior to their uniform thickness counterparts. The proposed approach provides useful guidance for designing TRB-TH energy absorbers for vehicle bodies.

  13. Influence of Filler Alloy Composition and Process Parameters on the Intermetallic Layer Thickness in Single-Sided Cold Metal Transfer Welding of Aluminum-Steel Blanks

    Science.gov (United States)

    Silvayeh, Zahra; Vallant, Rudolf; Sommitsch, Christof; Götzinger, Bruno; Karner, Werner; Hartmann, Matthias

    2017-11-01

    Hybrid components made of aluminum alloys and high-strength steels are typically used in automotive lightweight applications. Dissimilar joining of these materials is quite challenging; however, it is mandatory in order to produce multimaterial car body structures. Since especially welding of tailored blanks is of utmost interest, single-sided Cold Metal Transfer butt welding of thin sheets of aluminum alloy EN AW 6014 T4 and galvanized dual-phase steel HCT 450 X + ZE 75/75 was experimentally investigated in this study. The influence of different filler alloy compositions and welding process parameters on the thickness of the intermetallic layer, which forms between the weld seam and the steel sheet, was studied. The microstructures of the weld seam and of the intermetallic layer were characterized using conventional optical light microscopy and scanning electron microscopy. The results reveal that increasing the heat input and decreasing the cooling intensity tend to increase the layer thickness. The silicon content of the filler alloy has the strongest influence on the thickness of the intermetallic layer, whereas the magnesium and scandium contents of the filler alloy influence the cracking tendency. The layer thickness is not uniform and shows spatial variations along the bonding interface. The thinnest intermetallic layer (mean thickness < 4 µm) is obtained using the silicon-rich filler Al-3Si-1Mn, but the layer is more than twice as thick when different low-silicon fillers are used.

  14. University Students Leaving Relationships (USLR): Scale Development and Gender Differences in Decisions to Leave Romantic Relationships

    Science.gov (United States)

    Hendy, Helen M.; Can, S. Hakan; Joseph, Lauren J.; Scherer, Cory R.

    2013-01-01

    The University Students Leaving Relationships scale was developed to identify student concerns when contemplating dissolution of romantic relationships. Participants included 1,106 students who rated the importance of issues when deciding to leave relationships. Factor analysis produced three dimensions: Missing the Relationship, Social…

  15. Occupational exposures and sick leave during pregnancy

    DEFF Research Database (Denmark)

    Hansen, Mette Lausten; Thulstrup, Ane Marie; Juhl, Mette

    2015-01-01

    OBJECTIVE: This study aimed to investigate associations between work postures, lifting at work, shift work, work hours, and job strain and the risk of sick leave during pregnancy from 10-29 completed pregnancy weeks in a large cohort of Danish pregnant women. METHODS: Data from 51 874 pregnancies...... in the Danish National Birth Cohort collected between 1996-2002 were linked to the Danish Register for Evaluation of Marginalization. Exposure information was based on telephone interviews. Hazard ratios (HR) with 95% confidence intervals (95% CI) were calculated by Cox regression analysis, using time of first...... episode of sick leave as the primary outcome. RESULTS: We found statistically significant associations between all the predictors and risk of sick leave; for non-sitting work postures (HRrange 1.55-2.79), cumulative lifting HRtrend 1.29, 95% CI 1.26-1.31, shift work (HRevening 1.90, 95% CI 1...

  16. The dewetting properties of lotus leaves.

    Science.gov (United States)

    Zhang, Jihua; Sheng, Xianliang; Jiang, Lei

    2009-02-03

    The high dewetting abilities of lotus leaves can be transited to a complete wetting state by soaking the leaves in water at a depth of 50 cm for 2 h. However, after being dried by N2 gas, the high dewetting behavior of lotus leaves may be mostly restored. This indicates that experimental procedure might considerably affect the dewetting abilities of lotus leaves. To discover the mechanism underlying this interesting dewetting phenomena, the dewetting force was used to characterize the dewetting abilities of surfaces, and model studies to mimic the papillae were done. Surface hydrophobicity, sizes, rise angles, and secondary structures of the models' sides affected their dewetting force with water. So we suggested that the dewetting states, Cassie or Wenzel's state, of lotus surfaces depend much on the depth of water, i.e., the hydraulic pressure. On the other hand, the primary structures of papillae in Cassie's state led to a high receding angle with respect to the plane of the leaf during the dewetting measurement. The secondary structures and micro/nano arrays of papillae increased the dewetting abilities of lotus leaves, since no water intruded between papillae. However, the structures of papillae in Wenzle's state significantly reduced the dewetting abilities of lotus leaves after being soaked at a depth of 50 cm for 2 h. Therefore, as for novel designs of microdevices floating on water, including the use of the high dewetting properties of suphydrophobic materials, surface (primary or secondary) microstructure and external pressure, such as static hydraulic pressure, must be taken into account.

  17. Aboriginal Determination: Native Title Claims and Barriers to Recognition

    Directory of Open Access Journals (Sweden)

    Zia Akhtar

    2011-09-01

    Full Text Available The Australian government has proposed a referendum in 2012 to decide the constitutional status of its indigenous people. There is at present no mechanism to define the indigenous people as a domestic or foreign entity of the Commonwealth. This is an important issue because other settler governments have developed a framework to implement their relationship with the native people. As a result, it is difficult prove title to land that has been abrogated by the deeds of the settlers. In Mabo v Queensland (2,the Commonwealth government was found to have breached its fiduciary duty to the Aboriginal peoples. The judgment led to the Native Title Act 1993 that established the process of asserting native rights that were held to coexist with pastoral ownership. The promulgation of the Native Title Amendment Act 1998 reversed this process and augmented the powers of non-native landlords by providing the device to extinguish native rights. In Western Australia v Ward, a mining lease was held to have precedence over native title that was adjudged to be part of a bundle of rights. In implementing the Native Title Act the issue turns on the determination of the ties to land/ sea that the government allows to the Aboriginal peoples. The judgment in Harrington-Smith on behalf of the Wongatha People v Western Australia indicates that title can be excluded on procedural grounds and that there was an incompatibility between the claims of the Aboriginal peoples and the settlers’ claims. The road map towards a more effective regime of proving title can be achieved if the Aboriginal peoples are granted recognition as a nation in the Constitution and a treaty is signed with them.

  18. Maternal Employment Effects of Paid Parental Leave

    OpenAIRE

    Bergemann, Annette; Riphahn, Regina T.

    2015-01-01

    We study the short, medium, and longer run employment effects of a substantial change in the parental leave benefit program in Germany. In 2007, a means-tested parental leave transfer program that had paid benefits for up to two years was replaced by an earnings related transfer which paid benefits for up to one year. The reform generated winners and losers with heterogeneous response incentives. We find that the reform speeds up the labor market return of both groups of mothers after benefit...

  19. Does paternity leave affect mothers’ sickness absence

    OpenAIRE

    Bratberg, Espen; Naz, Ghazala

    2009-01-01

    Female labour force participation is high in Norway but sickness absence rates are higher for women than for men. This may be partly a result of unequal sharing of childcare in the family. In this paper, we consider the effect of paternity leave on sickness absence among women who have recently given birth. We draw on a six-year panel taken from full population data from administrative sources. We find that in the 6% of families where fathers take out leave more than the standard quota (gende...

  20. Preparing Apigenin from Leaves of Adinandra nitida

    Directory of Open Access Journals (Sweden)

    Zhengxiang Ning

    2008-01-01

    Full Text Available Leaves of Adinandra nitida were used as raw material, and a new industrially significant method of preparing apigenin was established by hydrolyzing a water extract and recrystallizing it with ethanol in order to obtain a new source for the production of this flavone. A yield of about 2.5 % (dry mass was obtained with the purity of 93.05 %, determined by high performance liquid chromatography (HPLC. Moreover, the main flavonoids in leaves of Adinandra nitida and the product after acid hydrolysis were identified as camellianin A and apigenin, respectively, by ultraviolet-visible spectrometry (UV/VIS and electrospray ionization mass spectrometry (ESI-MS.