WorldWideScience

Sample records for tissue retraction device

  1. THE PLACE OF RETRACTION CORDS AMONG THE TISSUE DISPLACEMENT METHODS

    Directory of Open Access Journals (Sweden)

    Stoyan Yankov

    2017-12-01

    Full Text Available Gingival displacement is performed to create sufficient space between the finishing line and the gingival tissue, to allow the injection of the adequate bulk of the impression material into the expanded crevice. Control of moisture in the sulcus is also necessary. The variety of methods for tissue management can be broadly classified into surgical and non-surgical. Objective: To analyse the properties of tissue displacement methods, described in the literature for the last 4 years and display the prefered choices of the practitioners. Material and method: A time range from the last 4 years was set. Using the keywords “retraction cord” and “survey,” we found 64 from 115 articles in total, relevant to our topic. Patents, citations and books weren’t included in this review. Results from the overview of the properties of the different tissue management methods indicate that retraction cords take a significant place among them and can be recognised as a classical and well known method. Conclusions: The studies from the articles show adequate sulcal width right after retraction with most methods, sufficient haemostasis can also be obtained. Every each method, however, is accompanied by several drawbacks. Concidering all the quallities of the different tissue dispalcent methods, there is no specific evidence to promote the use of a single technique over any other. The selection of the method for gingival retraction primarily depends on each clinical case. However, the retraction cord technique remains to be the prefered method for gingival management due to its many advantages.

  2. Retraction

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Zhiheng [Vanderbilt University; Feldman, Leonard C [ORNL; Tolk, Norman H. [Vanderbilt University; Zhang, Zhenyu [ORNL; Cohen, Philip [University of Minnesota

    2012-01-01

    IN OUR 2006 REPORT, DESORPTION OF H FROM SI(111) BY RESONANT EXCITATION OF THE Si-H vibrational stretch mode (1), we reported resonant photodesorption of hydrogen from a Si(111) surface using tunable infrared radiation that corresponded to the Si-H vibrational stretch mode. Our recent attempts to reproduce these experiments have been unsuccessful, and the free electron laser facility at Vanderbilt, a unique light source for this experiment, has shut down, prohibiting further research. Because our conclusions are now in question, we retract the Report.

  3. An experimental method for detecting blood splatter from retractable phlebotomy and intravascular devices.

    Science.gov (United States)

    Haiduven, Donna; Applegarth, Shawn; Shroff, Miloni

    2009-03-01

    This study was designed to evaluate the safety of retractable intravascular devices in terms of their potential to produce blood splatter. A method for measuring this blood splatter designed by the research team was used to evaluate 3 specific intravascular devices. Scientific filters were positioned around the retraction mechanisms of the devices and weighed with an analytical scale, both before and after activation, in a simulated vein containing mock venous blood. The difference in filter mass was used as the primary unit of analysis to detect blood splatter. In addition, the filters were visually inspected for the presence or absence of blood. A paired t-test revealed significant differences in the prefilter and postfilter groups for 2 of the 3 devices tested (P blood was detected on 23% to 40% of the scientific filters for 2 of the devices. Our findings indicate a potential for bloodborne pathogen exposure with the use of intravascular devices with a retractable mechanism. This experiment may serve as a model in the design and implementation of future sharps device evaluation protocols to validate the threat of bloodborne pathogen exposure.

  4. Design, development, and evaluation of a novel retraction device for gallbladder extraction during laparoscopic cholecystectomy.

    Science.gov (United States)

    Judge, Joshua M; Stukenborg, George J; Johnston, William F; Guilford, William H; Slingluff, Craig L; Hallowell, Peter T

    2014-02-01

    A source of frustration during laparoscopic cholecystectomy involves extraction of the gallbladder through port sites smaller than the gallbladder itself. We describe the development and testing of a novel device for the safe, minimal enlargement of laparoscopic port sites to extract large, stone-filled gallbladders from the abdomen. The study device consists of a handle with a retraction tongue to shield the specimen and a guide for a scalpel to incise the fascia within the incision. Patients enrolled underwent laparoscopic cholecystectomy. Gallbladder extraction was attempted. If standard measures failed, the device was implemented. Extraction time and device utility scores were recorded for each patient. Patients returned 3-4 weeks postoperatively for assessment of pain level, cosmetic effect, and presence of infectious complications. Twenty (51 %) of 39 patients required the device. Average extraction time for the first eight patients was 120 s. After interim analysis, an improved device was used in 12 patients and average extraction time was 24 s. There were no adverse events. Postoperative pain ratings and incision cosmesis were comparable between patients with and without use of the device. The study device enables safe and rapid extraction of impacted gallbladders through the abdominal wall.

  5. A wound retraction device for laparoscopic-assisted intestinal surgery in dogs and cats.

    Science.gov (United States)

    Gower, Sara B; Mayhew, Philipp D

    2011-06-01

    To report experience with laparoscopic-assisted intestinal resection and anastomosis for treatment of discrete intestinal masses using a novel wound retraction device. Case series. Dogs (n=2) and cats (6). Dogs and cats with discrete intestinal masses identified by ultrasonography without evidence of intestinal perforation or peritonitis, were included. A 2 portal technique was used; 1 portal was enlarged for insertion of the wound retraction device through which the intestine was examined as thoroughly as possible. The diseased portion of the intestine was exteriorized through the wound retractor and resection and anastomosis of the intestinal mass performed. Of the 8 animals, laparoscopic-assisted intestinal resection and anastomosis through the wound retractor was performed in 2 dogs and 3 cats. In 3 cats, based on either location or extent of the lesion, 2 were converted to laparoscopic-assisted intestinal biopsies and 1 to an open colocolostomy. No other intra- or perioperative complications were encountered and all animals survived to discharge. Laparoscopic-assisted intestinal resection and anastomosis can be performed in select canine and feline patients with modestly sized, discrete intestinal masses. © Copyright 2011 by The American College of Veterinary Surgeons.

  6. En-masse retraction with a preformed nickel-titanium and stainless steel archwire assembly and temporary skeletal anchorage devices without posterior bonding

    Science.gov (United States)

    Jee, Jeong-Hyun; Ahn, Hyo-Won; Seo, Kyung-Won; Kook, Yoon-Ah; Chung, Kyu-Rhim; Nelson, Gerald

    2014-01-01

    Objective To evaluate the therapeutic effects of a preformed assembly of nickel-titanium (NiTi) and stainless steel (SS) archwires (preformed C-wire) combined with temporary skeletal anchorage devices (TSADs) as the sole source of anchorage and to compare these effects with those of a SS version of C-wire (conventional C-wire) for en-masse retraction. Methods Thirty-one adult female patients with skeletal Class I or II dentoalveolar protrusion, mild-to-moderate anterior crowding (3.0-6.0 mm), and stable Class I posterior occlusion were divided into conventional (n = 15) and preformed (n = 16) C-wire groups. All subjects underwent first premolar extractions and en-masse retraction with pre-adjusted edgewise anterior brackets, the assigned C-wire, and maxillary C-tubes or C-implants; bonded mesh-tube appliances were used in the mandibular dentition. Differences in pretreatment and post-retraction measurements of skeletal, dental, and soft-tissue cephalometric variables were statistically analyzed. Results Both groups showed full retraction of the maxillary anterior teeth by controlled tipping and space closure without altered posterior occlusion. However, the preformed C-wire group had a shorter retraction period (by 3.2 months). Furthermore, the maxillary molars in this group showed no significant mesialization, mesial tipping, or extrusion; some mesialization and mesial tipping occurred in the conventional C-wire group. Conclusions Preformed C-wires combined with maxillary TSADs enable simultaneous leveling and space closure from the beginning of the treatment without maxillary posterior bonding. This allows for faster treatment of dentoalveolar protrusion without unwanted side effects, when compared with conventional C-wire, evidencing its clinical expediency. PMID:25309863

  7. En-masse retraction with a preformed nickel-titanium and stainless steel archwire assembly and temporary skeletal anchorage devices without posterior bonding.

    Science.gov (United States)

    Jee, Jeong-Hyun; Ahn, Hyo-Won; Seo, Kyung-Won; Kim, Seong-Hun; Kook, Yoon-Ah; Chung, Kyu-Rhim; Nelson, Gerald

    2014-09-01

    To evaluate the therapeutic effects of a preformed assembly of nickel-titanium (NiTi) and stainless steel (SS) archwires (preformed C-wire) combined with temporary skeletal anchorage devices (TSADs) as the sole source of anchorage and to compare these effects with those of a SS version of C-wire (conventional C-wire) for en-masse retraction. Thirty-one adult female patients with skeletal Class I or II dentoalveolar protrusion, mild-to-moderate anterior crowding (3.0-6.0 mm), and stable Class I posterior occlusion were divided into conventional (n = 15) and preformed (n = 16) C-wire groups. All subjects underwent first premolar extractions and en-masse retraction with pre-adjusted edgewise anterior brackets, the assigned C-wire, and maxillary C-tubes or C-implants; bonded mesh-tube appliances were used in the mandibular dentition. Differences in pretreatment and post-retraction measurements of skeletal, dental, and soft-tissue cephalometric variables were statistically analyzed. Both groups showed full retraction of the maxillary anterior teeth by controlled tipping and space closure without altered posterior occlusion. However, the preformed C-wire group had a shorter retraction period (by 3.2 months). Furthermore, the maxillary molars in this group showed no significant mesialization, mesial tipping, or extrusion; some mesialization and mesial tipping occurred in the conventional C-wire group. Preformed C-wires combined with maxillary TSADs enable simultaneous leveling and space closure from the beginning of the treatment without maxillary posterior bonding. This allows for faster treatment of dentoalveolar protrusion without unwanted side effects, when compared with conventional C-wire, evidencing its clinical expediency.

  8. Retraction of “Accurate Prediction of Essential Fundamental Properties for Semiconductors Used in Solar-Energy Conversion Devices from Range-Separated Hybrid Density Functional Theory”

    KAUST Repository

    Harb, Moussab

    2016-01-01

    The author retracts this article due to similarities with a previously published article by Le Bahers, T.; Rerat, M.; Sautet, ́ P. Semiconductors Used in Photovoltaic and Photocatalytic Devices: Assessing Fundamental Properties from DFT. J. Phys

  9. Technical pitfalls in a porcine brain retraction model. The impact of brain spatula on the retracted brain tissue in a porcine model: a feasibility study and its technical pitfalls

    Energy Technology Data Exchange (ETDEWEB)

    Thiex, R.; Hans, F.J.; Gilsbach, J.M. [Aachen University, Department of Neurosurgery, Aachen (Germany); Krings, T. [Aachen University, Department of Neuroradiology, Aachen (Germany); Sellhaus, B. [Aachen University, Department of Neuropathology, Aachen (Germany)

    2005-10-01

    We describe technical pitfalls of a porcine brain injury model for identifying primary and secondary pathological sequelae following brain retraction by brain spatula. In 16 anaesthetised male pigs, the right frontal brain was retracted in the interhemispheric fissure by a brain spatulum with varying pressures applied by the gravitational force of weights from 10 to 70 g for a duration of 30 min. The retracted brain tissue was monitored for changes in intracranial pressure and perfusion of the cortex using a Laser Doppler Perfusion Imager (MoorLDI). To evaluate the extent of oedema and cortical contusions, MRI was performed 30 min and 72 h after brain retraction. Following the MR scan, the retracted brain areas were histopathologically assessed using H and E and Fluoro-Jade B staining for neuronal damage. Sinus occlusion occurred in four animals, resulting in bilateral cortical contusions and extensive brain oedema. Retracting the brain with weights of 70 g (n=4) caused extensive oedema on FLAIR images that correlated clinically with a hemiparesis in three animals. Morphologically, an increased number of Fluoro-Jade B-positive neurons were found. A sequential decrease in weights prevented functional deficits in animals. A retraction pressure applied by 10-g weights (n=7) caused a mean rise in intracranial pressure to 4.0{+-}3.1 mm Hg, and a decrement in mean cortical perfusion from 740.8{+-}41.5 to 693.8{+-}72.4 PU/cm2, (P<0.24). A meticulous dissection of the interhemispheric fissure and a reduction of weights to 10 g were found to be mandatory to study the cortical impact caused by brain spatula reproducibly. (orig.)

  10. Technical pitfalls in a porcine brain retraction model. The impact of brain spatula on the retracted brain tissue in a porcine model: a feasibility study and its technical pitfalls

    International Nuclear Information System (INIS)

    Thiex, R.; Hans, F.J.; Gilsbach, J.M.; Krings, T.; Sellhaus, B.

    2005-01-01

    We describe technical pitfalls of a porcine brain injury model for identifying primary and secondary pathological sequelae following brain retraction by brain spatula. In 16 anaesthetised male pigs, the right frontal brain was retracted in the interhemispheric fissure by a brain spatulum with varying pressures applied by the gravitational force of weights from 10 to 70 g for a duration of 30 min. The retracted brain tissue was monitored for changes in intracranial pressure and perfusion of the cortex using a Laser Doppler Perfusion Imager (MoorLDI). To evaluate the extent of oedema and cortical contusions, MRI was performed 30 min and 72 h after brain retraction. Following the MR scan, the retracted brain areas were histopathologically assessed using H and E and Fluoro-Jade B staining for neuronal damage. Sinus occlusion occurred in four animals, resulting in bilateral cortical contusions and extensive brain oedema. Retracting the brain with weights of 70 g (n=4) caused extensive oedema on FLAIR images that correlated clinically with a hemiparesis in three animals. Morphologically, an increased number of Fluoro-Jade B-positive neurons were found. A sequential decrease in weights prevented functional deficits in animals. A retraction pressure applied by 10-g weights (n=7) caused a mean rise in intracranial pressure to 4.0±3.1 mm Hg, and a decrement in mean cortical perfusion from 740.8±41.5 to 693.8±72.4 PU/cm2, (P<0.24). A meticulous dissection of the interhemispheric fissure and a reduction of weights to 10 g were found to be mandatory to study the cortical impact caused by brain spatula reproducibly. (orig.)

  11. A retracting wire knife for cutting fiber bundles and making sheet lesions of brain tissue.

    Science.gov (United States)

    Shibata, M; Russell, I S

    1979-07-01

    A retracting knife which has two cutting wires for the transection of fiber bundles is described. The knife holds the fiber bundles of the stria terminalis between the two cutting wires and transects them by a shearing movement as the wires close. In addition, the feasability of such a knife producing a sheet lesion around the n. caudatus is also described.

  12. A novel method for soft tissue retraction during periapical surgery using 3D technology: a case report.

    Science.gov (United States)

    Patel, S; Aldowaisan, A; Dawood, A

    2017-08-01

    This case report describes a new approach to isolation and soft tissue retraction during endodontic surgery using cone-beam computed tomography (CBCT), computer-aided design (CAD) and three-dimensional (3D) printing. A 53-year-old patient presented for endodontic treatment of her maxillary left central incisor. It was decided to treat this tooth with a microsurgical approach. The data from the diagnostic CBCT scan were also used to make a physical model of the operative site, and CAD software was used to design a soft tissue retractor to be used during the patient's surgery. A custom retractor was then fabricated using a 3D printer. The custom-made retractor enhanced visualization and soft tissue handling during the patient's surgery. The patient was asymptomatic at a 1-year review. No abnormalities were detected during her clinical examination, and radiographic examination revealed complete healing of the surgical site. The significance of proper soft tissue retraction in periapical microsurgery is underemphasized. Geometric data from CBCT scans may be harvested for a variety of uses, adding value to the examination. 3D printing is a promising technology that may potentially have many uses in endodontic surgery. © 2016 International Endodontic Journal. Published by John Wiley & Sons Ltd.

  13. Retraction of “Accurate Prediction of Essential Fundamental Properties for Semiconductors Used in Solar-Energy Conversion Devices from Range-Separated Hybrid Density Functional Theory”

    KAUST Repository

    Harb, Moussab

    2016-03-08

    The author retracts this article due to similarities with a previously published article by Le Bahers, T.; Rerat, M.; Sautet, ́ P. Semiconductors Used in Photovoltaic and Photocatalytic Devices: Assessing Fundamental Properties from DFT. J. Phys. Chem. C 2014, 118 (12), 5997−6008 (DOI: 10.1021/jp409724c).

  14. The contribution of matrix and cells to leaflet retraction in heart valve tissue engineering

    NARCIS (Netherlands)

    Vlimmeren, van M.A.A.

    2011-01-01

    Heart valve tissue engineering is a promising technique to overcome the drawbacks of currently used mechanical and prosthetic heart valve replacements. Tissue engineered (TE) heart valves are viable and autologous implants that have the capacity to grow, remodel and repair throughout a patient’s

  15. Evaluation of bacterial contamination of dental unit waterlines and use of a newly designed measurement device to assess retraction of a dental chair unit.

    Science.gov (United States)

    Ji, Xue-Yue; Fei, Chun-Nan; Zhang, Ying; Zhang, Wei; Liu, Jun; Dong, Jie

    2016-08-01

    Dental unit waterline (DUWL) output water is delivered through instruments of a dental chair unit (DCU) to irrigate and cool teeth. However, these waterlines can be heavily contaminated with bacteria. The purpose of the present study was to assess retraction and investigate the contamination level and prevalence of bacteria in DUWL output water. Fifty-eight DCUs were randomly selected from 30 hospitals in 10 districts of Tianjin, one of the four special municipalities of China. A unique sampling connector was used in place of the dental handpiece to collect water samples. Evaluation of retraction was accomplished using a retraction measurement device designed in accordance with the International Standard ISO 7494-2:2015(E). A total of 263 water samples were collected, and the highest concentration of bacteria [1.8 × 10(6) colony-forming units (CFU)/mL] was found in the handpiece group. Thirty (51.72%) water samples in the handpiece group and 21 (36.21%) in the air/water syringe groups were cultured, yielding colony counts of > 500 CFU/mL. Potential infectious agents, such as Bacillus cereus, Kocuria kristinae and Pseudomonas fluorescens, were isolated from the water samples. Thirty (51.72%) DCUs failed the retraction evaluation. There was a significant, positive correlation (P < 0.05) between the concentration of bacteria in the water sample and the retracted volume. It is of paramount importance to increase compliance with the standards for controlling DUWL contamination. Routine microbial monitoring and evaluation of retraction are necessary to provide high-quality water for use in dental treatment. © 2016 FDI World Dental Federation.

  16. RETRACTED: Six different hemofiltration devices for blood conservation in cardiac surgery.

    Science.gov (United States)

    Boldt, J; Zickmann, B; Fedderson, B; Herold, C; Dapper, F; Hempelmann, G

    1991-05-01

    Hemofiltration devices and the Cell Saver are the most often used techniques to reduce homologous blood requirements in cardiac surgery. In a controlled, randomized study, 105 patients underwent elective aortocoronary bypass grafting. Six different hemofilters (HF-80, HFT 14, CPB 7000, Cobe 1200, UF-205, BC-140) were tested and compared with the Cell Saver (Cell Saver 4) for blood concentration during and after cardiopulmonary bypass. Efficacy, practicality, and laboratory indices including coagulation variables were documented through the morning of the first postoperative day. The HF-80 and UF-205 were the most effective devices for blood concentration. At the end of the operation, the number of platelets was least reduced in these two groups (HF-80, -7%; UF-205, -6%). Moreover, both devices had a significantly higher filtration rate than the other hemofilters. Use of the Cell Saver resulted in the lowest values in coagulation variables (AT-III, fibrinogen, number of platelets) and the most pronounced deterioration in protein homeostasis (colloid osmotic pressure, albumin). In this group, the AT-III concentration was reduced until the morning of the first postoperative day. No negative effects were seen in regard to hemofiltration (free hemoglobin and polymorphonuclear elastase; the Cell Saver group had similar values for these variables). We conclude that blood salvage with hemofiltration devices is superior to that with the Cell Saver. There were, however, significant differences among the hemofilters. The HF-80 and UF-205 were the most effective devices in this study.

  17. RETRACTED: Advances in colloidal quantum dot solar cells: The depleted-heterojunction device

    KAUST Repository

    Kramer, Illan J.; Pattantyus-Abraham, Andras G.; Barkhouse, Aaron R.; Wang, Xihua; Konstantatos, Gerasimos; Debnath, Ratan; Levina, Larissa; Raabe, Ines; Nazeeruddin, Md. K.; Grä tzel, Michael; Sargent, Edward H.

    2011-01-01

    Colloidal quantum dot (CQD) photovoltaics combine low-cost solution processibility with quantum size-effect tunability to match absorption with the solar spectrum. Recent advances in CQD photovoltaics have led to 3.6% AM1.5 solar power conversion efficiencies. Here we report CQD photovoltaic devices on transparent conductive oxides and show that our devices rely on the establishment of a depletion region for field-driven charge transport and separation. The resultant depleted-heterojunction solar cells provide a 5.1% AM1.5 power conversion efficiency. The devices employ infrared-bandgap size-effect-tuned PbS colloidal quantum dots, enabling broadband harvesting of the solar spectrum. © 2010 Elsevier B.V.

  18. RETRACTED: Advances in colloidal quantum dot solar cells: The depleted-heterojunction device

    KAUST Repository

    Kramer, Illan J.

    2011-08-01

    Colloidal quantum dot (CQD) photovoltaics combine low-cost solution processibility with quantum size-effect tunability to match absorption with the solar spectrum. Recent advances in CQD photovoltaics have led to 3.6% AM1.5 solar power conversion efficiencies. Here we report CQD photovoltaic devices on transparent conductive oxides and show that our devices rely on the establishment of a depletion region for field-driven charge transport and separation. The resultant depleted-heterojunction solar cells provide a 5.1% AM1.5 power conversion efficiency. The devices employ infrared-bandgap size-effect-tuned PbS colloidal quantum dots, enabling broadband harvesting of the solar spectrum. © 2010 Elsevier B.V.

  19. Tissue-electronics interfaces: from implantable devices to engineered tissues

    Science.gov (United States)

    Feiner, Ron; Dvir, Tal

    2018-01-01

    Biomedical electronic devices are interfaced with the human body to extract precise medical data and to interfere with tissue function by providing electrical stimuli. In this Review, we outline physiologically and pathologically relevant tissue properties and processes that are important for designing implantable electronic devices. We summarize design principles for flexible and stretchable electronics that adapt to the mechanics of soft tissues, such as those including conducting polymers, liquid metal alloys, metallic buckling and meandering architectures. We further discuss technologies for inserting devices into the body in a minimally invasive manner and for eliminating them without further intervention. Finally, we introduce the concept of integrating electronic devices with biomaterials and cells, and we envision how such technologies may lead to the development of bionic organs for regenerative medicine.

  20. RETRACTED: Hydrological

    Directory of Open Access Journals (Sweden)

    S.S. Panhalkar

    2014-12-01

    This paper has been retracted upon the request of the author and the editor as the paper requires major revision. The author did not have the permission to publish part of the discharge information presented in Figures 10–13. The Publisher apologizes for any inconvenience this may cause.

  1. A backing device based on an embedded stiffener and retractable insertion tool for thin-film cochlear arrays

    Science.gov (United States)

    Tewari, Radheshyam

    Intracochlear trauma from surgical insertion of bulky electrode arrays and inadequate pitch perception are areas of concern with current hand-assembled commercial cochlear implants. Parylene thin-film arrays with higher electrode densities and lower profiles are a potential solution, but lack rigidity and hence depend on manually fabricated permanently attached polyethylene terephthalate (PET) tubing based bulky backing devices. As a solution, we investigated a new backing device with two sub-systems. The first sub-system is a thin poly(lactic acid) (PLA) stiffener that will be embedded in the parylene array. The second sub-system is an attaching and detaching mechanism, utilizing a poly(N-vinylpyrrolidone)-block-poly(d,l-lactide) (PVP-b-PDLLA) copolymer-based biodegradable and water soluble adhesive, that will help to retract the PET insertion tool after implantation. As a proof-of-concept of sub-system one, a microfabrication process for patterning PLA stiffeners embedded in parylene has been developed. Conventional hot-embossing, mechanical micromachining, and standard cleanroom processes were integrated for patterning fully released and discrete stiffeners coated with parylene. The released embedded stiffeners were thermoformed to demonstrate that imparting perimodiolar shapes to stiffener-embedded arrays will be possible. The developed process when integrated with the array fabrication process will allow fabrication of stiffener-embedded arrays in a single process. As a proof-of-concept of sub-system two, the feasibility of the attaching and detaching mechanism was demonstrated by adhering 1x and 1.5x scale PET tube-based insertion tools and PLA stiffeners embedded in parylene using the copolymer adhesive. The attached devices survived qualitative adhesion tests, thermoforming, and flexing. The viability of the detaching mechanism was tested by aging the assemblies in-vitro in phosphate buffer solution. The average detachment times, 2.6 minutes and 10 minutes

  2. Passive Sampling and Analysis of Naphthalene in Internal Combustion Engine Exhaust with Retracted SPME Device and GC-MS

    Directory of Open Access Journals (Sweden)

    Nassiba Baimatova

    2017-07-01

    Full Text Available Exhaust gases from internal combustion engines are the main source of urban air pollution. Quantification of Polycyclic aromatic hydrocarbons (PAHs in the exhaust gases is needed for emissions monitoring, enforcement, development, and testing of control technologies. The objective was to develop quantification of gaseous naphthalene in diesel engine exhaust based on diffusion-controlled extraction onto a retracted solid-phase microextraction (SPME fiber coating and analysis on gas chromatography-mass spectrometry (GC-MS. Extraction of naphthalene with retracted fibers followed Fick’s law of diffusion. Extracted mass of naphthalene was proportional to Cg, t, Dg, T and inversely proportional to Z. Method detection limit (p = 0.95 was 11.5 ppb (0.06 mg·m−3 at t = 9 h, Z = 10 mm and T = 40 °C, respectively. It was found that the % mass extracted of naphthalene by SPME needle assembly depended on the type of fiber. Storage time at different temperatures did not affect analyte losses extracted by polydimethylsiloxane (PDMS 100 µm fiber. The developed method was tested on exhaust gases from idling pickup truck and tractor, and compared side-by-side with a direct injection of sampled exhaust gas method. Time-weighted average (TWA concentrations of naphthalene in exhaust gases from idling pickup truck and a tractor ranged from 0.08 to 0.3 mg·m−3 (15.3–53.7 ppb.

  3. The Tie retraction syndrome.

    Science.gov (United States)

    Geerling, Gerd; Neppert, Birte; Hemmant, Bridget

    2012-12-01

    Tissue retraction is implicated in the pathogenesis of various ophthalmic disorders. Here we describe the clinical characteristics, epidemiology and pathophysiology of a form of retraction syndrome which - to the best of our knowledge - has not been reported in the ophthalmic literature so far. We have termed this condition - consisting of a slowly progressive pseudovertical shortening of tie length due to a horizontal extension of girth length - the "Tie retraction syndrome" (TRS). Other pathognomonic features include an increased tie tip to belt buckle distance and a prolapse of the subumbilical fat pad (SUFP). The syndrome has a clear male to female preponderance and shows an increasing incidence with age and income before tax. Based on a newly proposed grading scheme we discuss and illustrate the diagnosis as well as the medical and surgical management options of this abundant, but often undiagnosed condition. The authors have no explanation for the apparent lack of awareness for this widely preponderant syndrome and its severe cosmetically disfiguring potential. We thus would like to invite all fellow colleagues with expertise in the field to comment or present their views.

  4. Endogenous fibrinolysis facilitates clot retraction in vivo.

    Science.gov (United States)

    Samson, Andre L; Alwis, Imala; Maclean, Jessica A A; Priyananda, Pramith; Hawkett, Brian; Schoenwaelder, Simone M; Jackson, Shaun P

    2017-12-07

    Clot retraction refers to the process whereby activated platelets transduce contractile forces onto the fibrin network of a thrombus, which over time increases clot density and decreases clot size. This process is considered important for promoting clot stability and maintaining blood vessel patency. Insights into the mechanisms regulating clot retraction at sites of vascular injury have been hampered by a paucity of in vivo experimental models. By pairing localized vascular injury with thrombin microinjection in the mesenteric circulation of mice, we have demonstrated that the fibrin network of thrombi progressively compacts over a 2-hour period. This was a genuine retraction process, as treating thrombi with blebbistatin to inhibit myosin IIa-mediated platelet contractility prevented shrinkage of the fibrin network. Real-time confocal analysis of fibrinolysis after recombinant tissue-type plasminogen activator (tPA) administration revealed that incomplete proteolysis of fibrin polymers markedly facilitated clot retraction. Similarly, inhibiting endogenous fibrinolysis with tranexamic acid reduced retraction of fibrin polymers in vivo. In vitro clot retraction experiments indicated that subthreshold doses of tPA facilitated clot retraction through a plasmin-dependent mechanism. These effects correlated with changes in the elastic modulus of fibrin clots. These findings define the endogenous fibrinolytic system as an important regulator of clot retraction, and show that promoting clot retraction is a novel and complementary means by which fibrinolytic enzymes can reduce thrombus size. © 2017 by The American Society of Hematology.

  5. Intercostal retractions

    Science.gov (United States)

    ... windpipe Foreign body in the windpipe Pneumonia A lung problem in newborns called respiratory distress syndrome Collection of pus in the tissues in the back of the throat ( retropharyngeal abscess )

  6. 75 FR 68972 - Medical Devices; General and Plastic Surgery Devices; Classification of Tissue Adhesive With...

    Science.gov (United States)

    2010-11-10

    .... FDA-2010-N-0512] Medical Devices; General and Plastic Surgery Devices; Classification of Tissue... running to unintended areas, etc. B. Wound dehiscence C. Adverse tissue reaction and chemical burns D..., Clinical Studies, Labeling. Adverse tissue reaction and chemical Biocompatibility Animal burns. Testing...

  7. Tissue engineered devices for ligament repair, replacement and ...

    African Journals Online (AJOL)

    PRECIOUS

    2009-12-29

    Dec 29, 2009 ... These devices use a wide variety of materials and designs to replicate ligament mechanics and allow for new tissue regeneration. Key words: Anterior cruciate ligament (ACL), tissue engineering, cells, tensile, stress relaxation, polymer, allograft, xenograft. INTRODUCTION. The anterior cruciate ligament ...

  8. Maxillary incisor retraction: evaluation of different mechanisms

    Directory of Open Access Journals (Sweden)

    Antônio Carlos de Oliveira Ruellas

    2013-04-01

    Full Text Available OBJECTIVE: To mechanically evaluate different systems used for incisors retraction. METHODS: Three different methods for incisors retraction using 0.019 x 0.025-in stainless steel wire were evaluated. The samples were divided into three groups: Group A (retraction arch with 7-mm high vertical hooks; Group G3 (elastic chain attached to the miniimplant and to the 3-mm stainless steel hook soldered to the retraction arch; Group G6 (elastic chain attached to the mini-implant and to the 6-mm stainless steel hook soldered to the retraction arch. A dental mannequin was used for evaluation in order to simulate the desired movements when the device was exposed to a heat source. The analysis of variance (ANOVA and the Tukey test were used (p < 0.05. RESULTS: The results demonstrated that Groups G3 and G6 exhibited less extrusion and less incisor inclination during the retraction phase (p < 0.05. With regard to incisor extrusion, statistically significant differences were observed between Groups A and G3, and between Groups A and G6 (p < 0.05. Regarding incisor inclination, statistically significant differences were observed between the three systems evaluated (p < 0.05. CONCLUSIONS: Arches with 6-mm vertical hooks allow the force to be applied on the center of resistance of the incisors, thus improving mechanical control when compared with the other two systems.

  9. Porous expandable device for attachment to bone tissue

    Science.gov (United States)

    Rybicki, Edmund F.; Wheeler, Kenneth Ray; Hulbert, Lewis E.; Karagianes, Manuel Tom; Hassler, Craig R.

    1977-01-01

    A device for attaching to substantially solid living bone tissue, comprising a body member having an outer surface shaped to fit approximately into an empty space in the tissue and having pores into which the tissue can grow to strengthen the bond between the device and the tissue, and adjustable means for expanding the body member against the tissue to an extent such as to provide a compressive stress capable of maintaining a snug and stable fit and of enhancing the growth of the tissue into the pores in the body member. The expanding means is adjustable to provide a stress between the tissue and the body member in the range of about 150 to 750 psi, typically 150 to 350 psi. Typically the body member comprises an expandable cylindrical portion having at least one radial slit extending longitudinally from a first end to the vicinity of the opposite (second) end thereof, at least one radial slit extending longitudinally from the second end to the vicinity of the first end thereof, and a tapered cylindrical hole extending coaxially from a wider circular opening in the first end to a narrower circular opening communicating with the second end.

  10. A new method for rapid Canine retraction

    Directory of Open Access Journals (Sweden)

    "Khavari A

    2001-06-01

    Full Text Available Distraction osteogenesis method (Do in bone lengthening and rapid midpalatal expansion have shown the great ability of osteognic tissues for rapid bone formation under distraction force and special protocol with optimum rate of one millimeter per day. Periodontal membrane of teeth (PDM is the extension of periostium in the alveolar socked. Orthodontic force distracts PDM fibers in the tension side and then bone formation will begin.Objects: Rapid retraction of canine tooth into extraction space of first premolar by DO protocol in order to show the ability of the PDM in rapid bone formation. The other objective was reducing total orthodontic treatment time of extraction cases.Patients and Methods: Tweleve maxillary canines in six patients were retracted rapidly in three weeks by a custom-made tooth-born appliance. Radiographic records were taken to evaluate the effects of heavy applied force on canine and anchorage teeth.Results: Average retraction was 7.05 mm in three weeks (2.35 mm/week. Canines rotated distal- in by mean 3.5 degrees.Anchorage loss was from 0 to 0.8 mm with average of 0.3 mm.Root resorption of canines was negligible, and was not significant clinically. Periodontium was normal after rapid retraction. No hazard for pulp vitality was observed.Discussion: PDM responded well to heavy distraction force by Do protocol. Rapid canine retraction seems to be a safe method and can considerabely reduce orthodontic time.

  11. RETRACTED: Nuclear Materials IV

    International Nuclear Information System (INIS)

    Degueldre, C.

    2011-01-01

    This article has been retracted: please see Elsevier Policy on Article Withdrawal ( (http://www.elsevier.com/locate/withdrawalpolicy)). This article has been retracted at the request of the Publisher. This document was mistakenly published instead of the editorial of this special issue. The correct editorial is published in J. Nucl. Mater., 419 (2011) 398, (http://dx.doi.org/10.1016/j.jnucmat.2011.11.033). Apologies are offered to the guest editors and to readers of the Journal that this error was not detected during the production process.

  12. Retraction in Cariocan Portuguese.

    Science.gov (United States)

    Reis, Isaias

    This study looks at the retraction phenomenon of the alveolar fricatives [s] and [z] in Cariocan Portuguese, the dialect used in Rio de Janeiro, Brazil and its correlation with selected social characteristics of the study's informants. No prior study exists that focuses only on this phonological feature in this dialect. Before describing…

  13. A high throughput mechanical screening device for cartilage tissue engineering.

    Science.gov (United States)

    Mohanraj, Bhavana; Hou, Chieh; Meloni, Gregory R; Cosgrove, Brian D; Dodge, George R; Mauck, Robert L

    2014-06-27

    Articular cartilage enables efficient and near-frictionless load transmission, but suffers from poor inherent healing capacity. As such, cartilage tissue engineering strategies have focused on mimicking both compositional and mechanical properties of native tissue in order to provide effective repair materials for the treatment of damaged or degenerated joint surfaces. However, given the large number design parameters available (e.g. cell sources, scaffold designs, and growth factors), it is difficult to conduct combinatorial experiments of engineered cartilage. This is particularly exacerbated when mechanical properties are a primary outcome, given the long time required for testing of individual samples. High throughput screening is utilized widely in the pharmaceutical industry to rapidly and cost-effectively assess the effects of thousands of compounds for therapeutic discovery. Here we adapted this approach to develop a high throughput mechanical screening (HTMS) system capable of measuring the mechanical properties of up to 48 materials simultaneously. The HTMS device was validated by testing various biomaterials and engineered cartilage constructs and by comparing the HTMS results to those derived from conventional single sample compression tests. Further evaluation showed that the HTMS system was capable of distinguishing and identifying 'hits', or factors that influence the degree of tissue maturation. Future iterations of this device will focus on reducing data variability, increasing force sensitivity and range, as well as scaling-up to even larger (96-well) formats. This HTMS device provides a novel tool for cartilage tissue engineering, freeing experimental design from the limitations of mechanical testing throughput. © 2013 Published by Elsevier Ltd.

  14. Evaluation of Tissue Interactions with Mechanical Elements of a Transscleral Drug Delivery Device

    Directory of Open Access Journals (Sweden)

    Jeffrey T. Borenstein

    2012-03-01

    Full Text Available The goal of this work was to evaluate tissue-device interactions due to implantation of a mechanically operated drug delivery system onto the posterior sclera. Two test devices were designed and fabricated to model elements of the drug delivery device—one containing a free-spinning ball bearing and the other encasing two articulating gears. Openings in the base of test devices modeled ports for drug passage from device to sclera. Porous poly(tetrafluoroethylene (PTFE membranes were attached to half of the gear devices to minimize tissue ingrowth through these ports. Test devices were sutured onto rabbit eyes for 10 weeks. Tissue-device interactions were evaluated histologically and mechanically after removal to determine effects on device function and changes in surrounding tissue. Test devices were generally well-tolerated during residence in the animal. All devices encouraged fibrous tissue formation between the sclera and the device, fibrous tissue encapsulation and invasion around the device, and inflammation of the conjunctiva. Gear devices encouraged significantly greater inflammation in all cases and a larger rate of tissue ingrowth. PTFE membranes prevented tissue invasion through the covered drug ports, though tissue migrated in through other smaller openings. The torque required to turn the mechanical elements increased over 1000 times for gear devices, but only on the order of 100 times for membrane-covered gear devices and less than 100 times for ball bearing devices. Maintaining a lower device profile, minimizing microscale motion on the eye surface and covering drug ports with a porous membrane may minimize inflammation, decreasing the risk of damage to surrounding tissues and minimizing disruption of device operation.

  15. Open-Coil Retraction Spring

    Directory of Open Access Journals (Sweden)

    Pavankumar Janardan Vibhute

    2011-01-01

    Full Text Available Sliding mechanic has become a popular method for space closure with developments in preadjusted edgewise appliance. Furthermore, various space closing auxiliaries have been developed and evaluated extensively for their clinical efficiency. Their effectiveness enhanced with optimum force magnitude and low-load deflection rate (LDR/force decay. With the advent of NiTi springs in orthodontics, LDRs have been markedly reduced. For use of NiTi, clinician has to depend upon prefabricated closed coil springs. “Open Coil Retraction Spring (OCRS” is developed utilizing NiTi open-coil spring for orthodontic space closure. This paper describes fabrication and clinical application of OCRS which have number of advantages. It sustains low LDR with optimum force magnitude. Its design is adjustable for desired length and force level. It is fail-safe for both activation and deactivation (i.e., it cannot be over activated, and decompression limit of open coil is also controlled by the operator, resp.. A possibility to offset the OCRS away from mucosa helps to reduce its soft-tissue impingement.

  16. Tissue engineered devices for ligament repair, replacement and ...

    African Journals Online (AJOL)

    potential, severe damage warrants surgical intervention including complete replacement. Ligaments are longitudinally arranged, complex tissues; the mechanical properties of ligaments are a direct result of their components and the arrangement of these components in the tissue. It is these mechanics that have made ...

  17. The Application of Minimally Invasive Devices with Nanostructured Surface Functionalization: Antisticking Behavior on Devices and Liver Tissue Interface in Rat

    Directory of Open Access Journals (Sweden)

    Li-Hsiang Lin

    2015-01-01

    Full Text Available This study investigated the thermal injury and adhesion property of a novel electrosurgery of liver using copper-doped diamond-like carbon (DLC-Cu surface treatment. It is necessary to reduce the thermal damage of surrounding tissues for clinical electrosurgeries. The surface morphologies of stainless steel (SS coated with DLC (DLC-Cu-SS films were characterized by scanning electron microscopy (SEM and transmission electron microscopy (TEM. Bionic liver models were reconstructed using magnetic resonance imaging (MRI to simulate electrosurgery. Cell cytotoxicity assays showed that the DLC-Cu thin film was nontoxic. The temperature of tissue decreased significantly with use of the electrosurgical device with nanostructured DLC-Cu films and increased with increasing thickness of the films. Thermography revealed that the surgical temperature in the DLC-Cu-SS electrosurgical device was significantly lower than that in the untreated device in the animal model. Moreover, compared to the SS electrosurgical device, the DLC-Cu-SS electrosurgical device caused a relatively small injury area and lateral thermal effect. The results indicate that the DLC-Cu-SS electrosurgical device decreases excessive thermal injury and ensures homogeneous temperature transformation in the tissues.

  18. An Automatic Occlusion Device for Remote Control of Tumor Tissue Ischemia

    Science.gov (United States)

    El-Dahdah, Hamid; Wang, Bei; He, Guanglong; Xu, Ronald X.

    2015-01-01

    We developed an automatic occlusion device for remote control of tumor tissue ischemia. The device consists of a flexible cannula encasing a shape memory alloy wire with its distal end connected to surgical suture. Regional tissue occlusion was tested on both the benchtop and the animal models. In the benchtop test, the occlusion device introduced quantitative and reproducible changes of blood flow in a tissue simulating phantom embedding a vessel simulator. In the animal test, the device generated a cyclic pattern of reversible ischemia in the right hinder leg tissue of a black male C57BL/6 mouse. We also developed a multimodal detector that integrates near infrared spectroscopy and electron paramagnetic resonance spectroscopy for continuous monitoring of tumor tissue oxygenation, blood content, and oxygen tension changes. The multimodal detector was tested on a cancer xenograft nude mouse undergoing reversible tumor ischemia. The automatic occlusion device and the multi-modal detector can be potentially integrated for closed-loop feedback control of tumor tissue ischemia. Such an integrated occlusion device may be used in multiple clinical applications such as regional hypoperfusion control in tumor resection surgeries and thermal ablation processes. In addition, the proposed occlusion device can also be used as a research tool to understand tumor oxygen transport and hemodynamic characteristics. PMID:20082532

  19. Tissue engineered devices for ligament repair, replacement and ...

    African Journals Online (AJOL)

    PRECIOUS

    2009-12-29

    Dec 29, 2009 ... These devices use a wide variety of materials and designs to replicate ligament ... other during the application of strain, leading to viscous dissipation of stress at low ... low strains without straining the collagen molecules and plastically ..... anterior cruciate ligament: current and future concepts. New York:.

  20. Generating an Engineered Adipose Tissue Flap Using an External Suspension Device.

    Science.gov (United States)

    Wan, Jinlin; Dong, Ziqing; Lei, Chen; Lu, Feng

    2016-07-01

    The tissue-engineering chamber technique can generate large volumes of adipose tissue, which provides a potential solution for the complex reconstruction of large soft-tissue defects. However, major drawbacks of this technique are the foreign-body reaction and the volume limitation imposed by the chamber. In this study, the authors developed a novel tissue-engineering method using a specially designed external suspension device that generates an optimized volume of adipose flap and avoids the implantation of foreign material. The rabbits were processed using two different tissue-engineering methods, the external suspension device technique and the traditional tissue-engineering chamber technique. The adipose flaps generated by the external suspension device had a normal adipose tissue structure that was as good as that generated by the traditional tissue-engineering chamber, but the flap volume was much larger. The final volume of the engineered adipose flap grew between weeks 0 and 36 from 5.1 ml to 30.7 ml in the traditional tissue-engineering chamber group and to 80.5 ml in the external suspension device group. During the generation process, there were no marked differences between the two methods in terms of structural and cellular changes of the flap, except that the flaps in the traditional tissue-engineering chamber group had a thicker capsule at the early stage. In addition, the enlarged flaps generated by the external suspension device could be reshaped into specific shapes by the implant chamber. This minimally invasive external suspension device technique can generate large-volume adipose flaps. Combined with a reshaping method, this technique should facilitate clinical application of adipose tissue engineering.

  1. Retractions in cancer research: a systematic survey

    OpenAIRE

    Bozzo, Anthony; Bali, Kamal; Evaniew, Nathan; Ghert, Michelle

    2017-01-01

    Background The annual number of retracted publications in the scientific literature is rapidly increasing. The objective of this study was to determine the frequency and reason for retraction of cancer publications and to determine how journals in the cancer field handle retracted articles. Methods We searched three online databases (MEDLINE, Embase, The Cochrane Library) from database inception until 2015 for retracted journal publications related to cancer research. For each article, the re...

  2. Retracted publications in the drug literature.

    Science.gov (United States)

    Samp, Jennifer C; Schumock, Glen T; Pickard, A Simon

    2012-07-01

    Recent studies have suggested an increase in the number of retracted scientific publications. It is unclear how broadly the issue of misleading and fraudulent publications pertains to retractions of drug therapy studies. Therefore, we sought to determine the trends and factors associated with retracted publications in drug therapy literature. A PubMed search was conducted to identify retracted drug therapy articles published from 2000-2011. Articles were grouped according to reason for retraction, which was classified as scientific misconduct or error. Scientific misconduct was further divided into data fabrication, data falsification, questions of data veracity, unethical author conduct, and plagiarism. Error was defined as duplicate publication, scientific mistake, journal error, or unstated reasons. Additional data were extracted from the retracted articles, including type of article, funding source, author information, therapeutic area, and retraction issue. A total of 742 retractions were identified from 2000-2011 in the general biomedical literature, and 102 drug studies met our inclusion criteria. Of these, 73 articles (72%) were retracted for a reason classified as scientific misconduct, whereas 29 articles (28%) were retracted for error. Among the 73 articles classified as scientific misconduct, those classified as unethical author conduct (32 articles [44%]) and data fabrication (24 articles [33%]) constituted the majority. The median time from publication of the original article to retraction was 31 months (range 1-130). Fifty percent of retracted articles did not state a funding source, whereas pharmaceutical manufacturer funding accounted for only 13 articles (13%) analyzed. Many retractions were due to repeat offenses by a small number of authors, with nearly 40% of the retracted studies associated with two individuals. We found that a greater proportion of drug therapy articles were retracted for reasons of misconduct and fraud compared with other

  3. Corticotomy-assisted retraction: An outcome assessment

    Directory of Open Access Journals (Sweden)

    S Vijayashri Sakthi

    2014-01-01

    Conclusion: The rate of retraction with study group was twice as faster when compared to the control group, accelerating during the first 2 months of retraction. There was better anchorage control with the undecorticated molar segment during the retraction period but was found to increase as time advanced.

  4. Controlled delivery of antiangiogenic drug to human eye tissue using a MEMS device

    KAUST Repository

    Pirmoradi, Fatemeh Nazly; Ou, Kevin; Jackson, John K.; Letchford, Kevin; Cui, Jing; Wolf, Ki Tae; Graber, Florian; Zhao, Tom; Matsubara, Joanne A.; Burt, Helen; Chiao, Mu; Lin, Liwei

    2013-01-01

    We demonstrate an implantable MEMS drug delivery device to conduct controlled and on-demand, ex vivo drug transport to human eye tissue. Remotely operated drug delivery to human post-mortem eyes was performed via a MEMS device. The developed curved

  5. Development of technique for laser welding of biological tissues using laser welding device and nanocomposite solder.

    Science.gov (United States)

    Gerasimenko, A; Ichcitidze, L; Podgaetsky, V; Ryabkin, D; Pyankov, E; Saveliev, M; Selishchev, S

    2015-08-01

    The laser device for welding of biological tissues has been developed involving quality control and temperature stabilization of weld seam. Laser nanocomposite solder applied onto a wound to be weld has been used. Physicochemical properties of the nanocomposite solder have been elucidated. The nature of the tissue-organizing nanoscaffold has been analyzed at the site of biotissue welding.

  6. Controlled delivery of antiangiogenic drug to human eye tissue using a MEMS device

    KAUST Repository

    Pirmoradi, Fatemeh Nazly

    2013-01-01

    We demonstrate an implantable MEMS drug delivery device to conduct controlled and on-demand, ex vivo drug transport to human eye tissue. Remotely operated drug delivery to human post-mortem eyes was performed via a MEMS device. The developed curved packaging cover conforms to the eyeball thereby preventing the eye tissue from contacting the actuating membrane. By pulsed operation of the device, using an externally applied magnetic field, the drug released from the device accumulates in a cavity adjacent to the tissue. As such, docetaxel (DTX), an antiangiogenic drug, diffuses through the eye tissue, from sclera and choroid to retina. DTX uptake by sclera and choroid were measured to be 1.93±0.66 and 7.24±0.37 μg/g tissue, respectively, after two hours in pulsed operation mode (10s on/off cycles) at 23°C. During this period, a total amount of 192 ng DTX diffused into the exposed tissue. This MEMS device shows great potential for the treatment of ocular posterior segment diseases such as diabetic retinopathy by introducing a novel way of drug administration to the eye. © 2013 IEEE.

  7. Magnetic Retraction of Bowel by Intraluminal Injectable Cyanoacrylate-Based Magnetic Glue

    Directory of Open Access Journals (Sweden)

    Zhigang Wang

    2013-01-01

    Full Text Available Magnetic retraction offers advantages over physical retraction by graspers because of reduced tissue trauma. The objectives of this study are to investigate a novel method of magnetisation of bowel segments by intraluminal injection of magnetic glue and to demonstrate the feasibility of magnetic retraction of bowel with sufficient force during minimal access surgery. Following an initial materials characterisation study, selected microparticles of stainless steel (SS410-μPs were mixed with chosen cyanoacrylate glue (Loctite 4014. During intraluminal injection of the magnetic glue using ex vivo porcine colonic segments, a magnetic probe placed at the injected site ensured that the SS410-μPs aggregated during glue polymerisation to form an intraluminal mucosally adherent coagulum. The magnetised colonic segments were retracted by magnetic probes (5 and 10 mm placed external to the bowel wall. A tensiometer was used to record the retraction force. With an injected volume of 2 mL in a particle concentration of 1 g/mL, this technique produced maximal magnetic retraction forces of 2.24 ± 0.23 N and 5.11 ± 0.34 N (, with use of 5 and 10 mm probes, respectively. The results indicate that the formation of an intraluminal coagulum based on SS410-μPs and Loctite 4014 produces sufficient magnetic retraction for bowel retraction.

  8. A survey of retracted articles in dentistry.

    Science.gov (United States)

    Nogueira, Túlio Eduardo; Gonçalves, Andréia Souza; Leles, Cláudio Rodrigues; Batista, Aline Carvalho; Costa, Luciane Rezende

    2017-07-06

    Publication retraction is a mechanism to preserve the scientific literature against publications that contain seriously flawed or erroneous data, redundant publication, plagiarism, unethical research, and other features that compromise the integrity of science. An increase in the occurrence of retractions in recent years has been reported. Nevertheless, there is scarce information on this topic concerning publications in dentistry and related specialties. Thus, this study aimed to investigate retracted papers published in dental journals. Data collection included an exploratory search in PubMed and a specific search in SCImago Journal Rank indexed journals, complemented by the cases reported on the Retraction Watch website and in PubMed. All 167 dental journals included in SCImago were searched for identification of retracted articles up to March 2016. The selected retracted articles and their corresponding retraction notices were recorded and assessed for classification according to the reason for retraction and other additional information. Forty of the 167 journals scrutinised at SCImago (23.9%) had at least one retracted article, and four additional journals were identified from the Retraction Watch website. A total of 72 retracted found were retracted for the reasons: redundant publication (20.8%), plagiarism (18.1%), misconduct (13.8%), overlap (13.6%) and honest error (9.7%). Higher number of retractions were reported in those journals with cites/doc <2.0-n = 49 (74.2%). The types of studies were mainly laboratory studies (34.7%), case reports (22.2%) and review articles (13.9%). The approach to ethical problems in papers published in dental scientific journals is still incipient; retractions were mostly due to the authors' malpractice and were more frequently related to journals with less impact.

  9. Editor's note: notice of retraction.

    Science.gov (United States)

    Shafer, Steven L

    2014-11-01

    In 2009, Joachim Boldt published an article in Anesthesia & Analgesia comparing albumin and hydroxyethyl starch priming cardiopulmonary bypass. The study was retracted in December 2010 for lack of IRB approval. A subsequent investigation by Klinikum Ludwigshafen determined that the study was fabricated. Based on the finding by Landesärztekammer Rheinland-Pfalz, the State Medical Association of Rheinland-Pfalz, that the studies were conducted without IRB approval, Anesthesia & Analgesia retracted 22 papers by Dr. Boldt in 2011 for unethical conduct of research. A subsequent investigation by Klinikum Ludwigshafen found that Boldt’s studies "failed to meet required standards," included "false data" in at least 10 studies, and found "clear evidence of procedural irregularities and research misconduct on the part of Dr. Joachim Boldt." In light of these concerns, Justus-Liebig Universität Giessen undertook an investigation of Dr. Boldt’s work from that institution. This investigation cast doubt on the veracity of Boldt J, Heesen M, Müller M, Pabsdorf M, Hempelmann G. The effects of albumin versus hydroxyethyl starch solution on cardiorespiratory and circulatory variables in critically ill patient. Anesth Analg 1996;83: 254–61. Based on evidence of data manipulation reported by Justus-Liebig Universität Giessen to the journal, this paper is hereby retracted.

  10. Modelling organs, tissues, cells and devices using Matlab and Comsol multiphysics

    CERN Document Server

    Dokos, Socrates

    2017-01-01

    This book presents a theoretical and practical overview of computational modeling in bioengineering, focusing on a range of applications including electrical stimulation of neural and cardiac tissue, implantable drug delivery, cancer therapy, biomechanics, cardiovascular dynamics, as well as fluid-structure interaction for modelling of organs, tissues, cells and devices. It covers the basic principles of modeling and simulation with ordinary and partial differential equations using MATLAB and COMSOL Multiphysics numerical software. The target audience primarily comprises postgraduate students and researchers, but the book may also be beneficial for practitioners in the medical device industry.

  11. Topological stability through extremely tame retractions

    DEFF Research Database (Denmark)

    Feragen, Aasa

    2012-01-01

    not know whether f will be topologically stable if we can find a pair of continuous retractions r and s. The class of extremely tame (E-tame) retractions, introduced by du Plessis and Wall, are defined by their nice geometric properties, which are sufficient to ensure that f is topologically stable....... In this article, we present the E-tame retractions and their relation with topological stability, survey recent results by the author concerning their construction, and illustrate the use of our techniques by constructing E-tame retractions for certain germs belonging to the E- and Z-series of singularities....

  12. A pilot study of a new spectrophotometry device to measure tissue oxygen saturation.

    Science.gov (United States)

    Abel, Gemma; Allen, John; Drinnan, Michael

    2014-09-01

    Tissue oxygen saturation (SO2) measurements have the potential for far wider use than at present but are limited by device availability and portability for many potential applications. A device based on a small, low-cost general-purpose spectrophotometer (the Harrison device) might facilitate wider use. The aim of this study was to compare the Harrison device with a commercial instrument, the LEA O2C.Measurements were carried out on the forearm and finger of 20 healthy volunteers, using a blood pressure cuff on the upper arm to induce different levels of oxygenation. Repeatability of both devices was assessed, and the Bland-Altman method was used to assess agreement between them.The devices showed agreement in overall tracking of changes in SO2. Test-retest agreement for the Harrison device was worse than for O2C, with SD repeatability of 10.6% (forearm) or 18.6% (finger). There was no overall bias between devices, but mean (SD) difference of 1.2 (11.8%) (forearm) or 4.4 (11.5%) (finger) were outside of a clinically acceptable range.Disagreements were attributed to the stability of the Harrison probe and the natural SO2 variations across the skin surface increasing the random error. Therefore, though not equivalent to the LEA O2C, a probe redesign and averaged measurements may help establish the Harrison device as a low cost alternative.

  13. A pilot study of a new spectrophotometry device to measure tissue oxygen saturation

    International Nuclear Information System (INIS)

    Abel, Gemma; Allen, John; Drinnan, Michael

    2014-01-01

    Tissue oxygen saturation (SO2) measurements have the potential for far wider use than at present but are limited by device availability and portability for many potential applications. A device based on a small, low-cost general-purpose spectrophotometer (the Harrison device) might facilitate wider use. The aim of this study was to compare the Harrison device with a commercial instrument, the LEA O2C. Measurements were carried out on the forearm and finger of 20 healthy volunteers, using a blood pressure cuff on the upper arm to induce different levels of oxygenation. Repeatability of both devices was assessed, and the Bland–Altman method was used to assess agreement between them. The devices showed agreement in overall tracking of changes in SO2. Test–retest agreement for the Harrison device was worse than for O2C, with SD repeatability of 10.6% (forearm) or 18.6% (finger). There was no overall bias between devices, but mean (SD) difference of 1.2 (11.8%) (forearm) or 4.4 (11.5%) (finger) were outside of a clinically acceptable range. Disagreements were attributed to the stability of the Harrison probe and the natural SO2 variations across the skin surface increasing the random error. Therefore, though not equivalent to the LEA O2C, a probe redesign and averaged measurements may help establish the Harrison device as a low cost alternative. (paper)

  14. Deformation retracts of Stein spaces

    International Nuclear Information System (INIS)

    Hamm, H.; Mihalache, N.

    1995-01-01

    If X is an n-dimensional Stein space, it was proved that X has the homotopy type of a CW-complex of dimension≤n and in the algebraic case this was proved with the additional conclusion that the CW-complex is finite. In this paper the authors give an answer to the question if there exists a subset Q of X with the same topological properties as X, for instance Q is a strong deformation retract of X, and Q is a CW-complex of dimension≤n. 15 refs

  15. The Problem of Retraction in Critical Discussion

    NARCIS (Netherlands)

    Krabbe, Erik C. W.

    2001-01-01

    In many contexts a retraction of commitment is frowned upon. For instance, it is not appreciated, generally, if one withdraws a promise or denies an earlier statement. Critical discussion, too, can easily be disrupted by retractions, if these occur too frequently and at critical points. But on the

  16. Gingival Retraction Methods: A Systematic Review.

    Science.gov (United States)

    Tabassum, Sadia; Adnan, Samira; Khan, Farhan Raza

    2017-12-01

    The aim of this systematic review was to assess the gingival retraction methods in terms of the amount of gingival retraction achieved and changes observed in various clinical parameters: gingival index (GI), plaque index (PI), probing depth (PD), and attachment loss (AL). Data sources included three major databases, PubMed, CINAHL plus (Ebsco), and Cochrane, along with hand search. Search was made using the key terms in different permutations of gingival retraction* AND displacement method* OR technique* OR agents OR material* OR medicament*. The initial search results yielded 145 articles which were narrowed down to 10 articles using a strict eligibility criteria of including clinical trials or experimental studies on gingival retraction methods with the amount of tooth structure gained and assessment of clinical parameters as the outcomes conducted on human permanent teeth only. Gingival retraction was measured in 6/10 studies whereas the clinical parameters were assessed in 5/10 studies. The total number of teeth assessed in the 10 included studies was 400. The most common method used for gingival retraction was chemomechanical. The results were heterogeneous with regards to the outcome variables. No method seemed to be significantly superior to the other in terms of gingival retraction achieved. Clinical parameters were not significantly affected by the gingival retraction method. © 2016 by the American College of Prosthodontists.

  17. From Microscale Devices to 3D Printing: Advances in Fabrication of 3D Cardiovascular Tissues

    Science.gov (United States)

    Borovjagin, Anton V.; Ogle, Brenda; Berry, Joel; Zhang, Jianyi

    2016-01-01

    Current strategies for engineering cardiovascular cells and tissues have yielded a variety of sophisticated tools for studying disease mechanisms, for development of drug therapies, and for fabrication of tissue equivalents that may have application in future clinical use. These efforts are motivated by the need to extend traditional two-dimensional (2D) cell culture systems into 3D to more accurately replicate in vivo cell and tissue function of cardiovascular structures. Developments in microscale devices and bioprinted 3D tissues are beginning to supplant traditional 2D cell cultures and pre-clinical animal studies that have historically been the standard for drug and tissue development. These new approaches lend themselves to patient-specific diagnostics, therapeutics, and tissue regeneration. The emergence of these technologies also carries technical challenges to be met before traditional cell culture and animal testing become obsolete. Successful development and validation of 3D human tissue constructs will provide powerful new paradigms for more cost effective and timely translation of cardiovascular tissue equivalents. PMID:28057791

  18. Indentation and Observation of Anisotropic Soft Tissues Using an Indenter Device

    Directory of Open Access Journals (Sweden)

    Parinaz ASHRAFI

    2015-01-01

    Full Text Available Soft tissues of human body have complex structures and different mechanical behaviors than those of traditional engineering materials. There is a great urge to understand tissue behavior of human body. Experimental data is needed for improvement of soft tissue modeling and advancement in implants and prosthesis, as well as diagnosis of diseases. Mechanical behavior and responses change when tissue loses its liveliness and viability. One of the techniques for soft tissue testing is indentation, which is applied on live tissue in its physiological environment. Indentation affords several advantages over other types of tests such as uniaxial tension, biaxial tension, and simple shear and suction, thus it is of interest to develop new indentation techniques from which more valid data can be extracted. In this study a new indenter device was designed and constructed. Displacement and force rate cyclic loading, and relaxation experiments were conducted on human arm. The in-vivo force rate controlled cyclic loading test method which is novel is compared with the traditional displacement controlled cyclic loading tests. Anisotropic behavior of tissue cannot be determined by axisymmetric tips, therefore ellipsoid tips were used for examining anisotropy and inplane material direction of bulk soft tissues

  19. Improved Selectivity From a Wavelength Addressable Device for Wireless Stimulation of Neural Tissue

    Directory of Open Access Journals (Sweden)

    Elif Ç. Seymour

    2014-02-01

    Full Text Available Electrical neural stimulation with micro electrodes is a promising technique for restoring lost functions in the central nervous system as a result of injury or disease. One of the problems related to current neural stimulators is the tissue response due to the connecting wires and the presence of a rigid electrode inside soft neural tissue. We have developed a novel, optically activated, microscale photovoltaic neurostimulator based on a custom layered compound semiconductor heterostructure that is both wireless and has a comparatively small volume. Optical activation provides a wireless means of energy transfer to the neurostimulator, eliminating wires and the associated complications. This neurostimulator was shown to evoke action potentials and a functional motor response in the rat spinal cord. In this work, we extend our design to include wavelength selectivity and thus allowing independent activation of devices. As a proof of concept, we fabricated two different microscale devices with different spectral responsivities in the near-infrared region. We assessed the improved addressability of individual devices via wavelength selectivity as compared to spatial selectivity alone through on-bench optical measurements of the devices in combination with an in vivo light intensity profile in the rat cortex obtained in a previous study. We show that wavelength selectivity improves the individual addressability of the floating stimulators, thus increasing the number of devices that can be implanted in close proximity to each other.

  20. Misconduct as the main cause for retraction. A descriptive study of retracted publications and their authors.

    Science.gov (United States)

    Campos-Varela, Isabel; Ruano-Raviña, Alberto

    2018-06-05

    To analyze the causes of retracted publications and the main characteristics of their authors. A descriptive cross-sectional study was designed including all retracted publications from January 1st, 2013-December 31st, 2016 indexed in PubMed. The causes of retraction were classified as: data management, authorship issues, plagiarism, unethical research, journal issues, review process, conflict of interest, other causes, and unknown reasons. Then, misbehaviour was classified as misconduct, suspicion of misconduct or no misconduct suspicion. 1,082 retracted publications were identified. The retraction rate for the period was 2.5 per 10,000 publications. The main cause of retraction was misconduct (65.3%), and the leading reasons were plagiarism, data management and compromise of the review process. The highest proportion of retracted publications corresponded to Iran (15.52 per 10,000), followed by Egypt and China (11.75 and 8.26 per 10,000). Currently, misconduct is the main cause of retraction. Specific strategies to limit this phenomenon must be implemented. It would be useful to standardize reasons and procedures for retraction. The development of a standard retraction form to be permanently indexed in a database might be relevant. Copyright © 2018 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

  1. Retraction of Neurosurgical Publications: A Systematic Review.

    Science.gov (United States)

    Wang, Justin; Ku, Jerry C; Alotaibi, Naif M; Rutka, James T

    2017-07-01

    Despite the increasing awareness of scientific fraud, no attempt has been made to assess its prevalence in neurosurgery. The aim of our review was to assess the chronologic trend, reasons, research type/design, and country of origin of retracted neurosurgical publications. Three independent reviewers searched the EMBASE and MEDLINE databases using neurosurgical keywords for retracted articles from 1995 to 2016. Archives of retracted articles (retractionwatch.com) and the independent Web sites of neurosurgical journals were also searched. Data including the journal, impact factor, reason for retraction, country of origin, and citations were extracted. A total of 97 studies were included for data extraction. Journal impact factor ranged from 0.57 to 35.03. Most studies (61) were retracted within the last 5 years. The most common reason for retraction was because of a duplicated publication found elsewhere (26), followed closely by plagiarism (22), or presenting fraudulent data (14). Other reasons included scientific errors/mistakes, author misattribution, and compromised peer review. Articles originated from several countries and some were widely cited. Retractions of neurosurgical publications are increasing significantly, mostly because of issues of academic integrity, including duplicate publishing and plagiarism. Implementation of more transparent data-sharing repositories and thorough screening of data before manuscript submission, as well as additional educational programs for new researchers, may help mitigate these issues in the future. Copyright © 2017 Elsevier Inc. All rights reserved.

  2. The Effect of the Elimination of Micromotion and Tissue Strain on Intracortical Device Performance

    Science.gov (United States)

    2017-10-01

    evoked by short term and chronic implantation of non-softening, moderately softening, and softening shape memory polymer (SMP)-based intracortical...Does probe softening improve the surrounding tissue response and recording performance of the device? The short term impact will be on the scientific...community through publications and presentations. Over the long term , the core technology has exceptional promise for translation into the clinic. SMP

  3. In-situ photopolymerization and monitoring device for controlled shaping of tissue fillers, replacements, or implants

    Science.gov (United States)

    Schmocker, Andreas M.; Khoushabi, Azadeh; Bourban, Pierre-Etienne; Schizas, Constantin; Pioletti, Dominique; Moser, Christophe

    2015-03-01

    Photopolymerization is a common tool to harden materials initially in a liquid state. A surgeon can directly trigger the solidification of a dental implant or a bone or tissue filler simply by illumination. Traditionally, photopolymerization has been used mainly in dentistry. Over the last decade advances in material development including a wide range of biocompatible gel- and cement-systems open up a new avenue for in-situ photopolymerization. However, at the device level, surgical endoscopic probes are required. We present a miniaturized light probe where a photoactive material can be 1) mixed, pressurized and injected 2) photopolymerized or photoactivated and 3) monitored during the chemical reaction. The device enables surgeries to be conducted through a hole smaller than 1 mm in diameter. Beside basic injection mechanics, the tool consists of an optical fiber guiding the light required for photopolymerization and for chemical analysis. Combining photorheology and fluorescence spectroscopy, the current state of the photopolymerization is inferred and monitored in real time. Biocompatible and highly tuneable Poly-Ethylene-Glycol (PEG) hydrogels were used as the injection material. The device was tested on a model for intervertebral disc replacement. Gels were successfully implanted into a bovine caudal model and mechanically tested in-vitro during two weeks. The photopolymerized gel was evaluated at the tissue level (adherence and mechanical properties of the implant), at the cellular level (biocompatibility and cytotoxicity) and ergonomic level (sterilization procedure and feasibility study). This paper covers the monitoring aspect of the device.

  4. Clinical application of micro-implant anchorage in initial orthodontic retraction.

    Science.gov (United States)

    Wahabuddin, Shaji; Mascarenhas, Rohan; Iqbal, Mahamad; Husain, Akhter

    2015-02-01

    Micro-implant is a device that is temporarily fixed to bone for the purpose of enhancing orthodontic anchorage either by supporting the teeth of the reactive unit or by obviating the need for the reactive unit altogether, and which is subsequently removed after use. The purpose of this study was to evaluate the clinical efficiency of micro-implants in reinforcing anchorage during the initial retraction of anterior teeth, check the rate of initial retraction for 8 weeks, and assess the stability of micro-implants during this period. Eighteen micro-implants were placed (10 in the maxilla and 8 in the mandible) and immediately loaded with 200-250 g of force using 9-mm closed coil Nitinol springs. The amount of space closure was measured every 2 weeks until the eighth week. Cephalometric measurements were made at the end of the study to evaluate anchor loss, if any. Micro-implant stability was also assessed. The rate of initial retraction in the maxilla at the end of 8 weeks was 1.65 mm/quadrant and 1.51 mm/quadrant in the mandible. The amount of retraction on the left side of the arches was 1.66 mm/quadrant and 1.49 mm/quadrant on the right side. The average initial retraction for both arches per month was 0.78 mm. An anchor loss of 0.1 mm (0.06%) was observed in the maxilla while no mandibular anchor loss was recorded. The rate of initial retraction observed in the maxilla was more than that achieved in the mandible. Initial retraction was also more on the left side of the arches. There was no anchor loss in the mandible. The micro-implant-reinforced anchorage was helpful in minimizing anchor loss and accepted heavy traction forces but did not bring about a faster rate of retraction.

  5. The (lack of) impact of retraction on citation networks.

    Science.gov (United States)

    Madlock-Brown, Charisse R; Eichmann, David

    2015-02-01

    Article retraction in research is rising, yet retracted articles continue to be cited at a disturbing rate. This paper presents an analysis of recent retraction patterns, with a unique emphasis on the role author self-cites play, to assist the scientific community in creating counter-strategies. This was accomplished by examining the following: (1) A categorization of retracted articles more complete than previously published work. (2) The relationship between citation counts and after-retraction self-cites from the authors of the work, and the distribution of self-cites across our retraction categories. (3) The distribution of retractions written by both the author and the editor across our retraction categories. (4) The trends for seven of our nine defined retraction categories over a 6-year period. (5) The average journal impact factor by category, and the relationship between impact factor, author self-cites, and overall citations. Our findings indicate new reasons for retractions have emerged in recent years, and more editors are penning retractions. The rates of increase for retraction varies by category, and there is statistically significant difference of average impact factor between many categories. 18 % of authors self-cite retracted work post retraction with only 10 % of those authors also citing the retraction notice. Further, there is a positive correlation between self-cites and after retraction citations.

  6. A new biomedical device for in vivo multiparametric evaluation of tissue vitality in critical care medicine

    Science.gov (United States)

    Mayevsky, Avraham; Deutsch, Assaf; Dekel, Nava; Pevzner, Eliyahu; Jaronkin, Alex

    2005-04-01

    Real time Monitoring of mitochondrial function in vivo is a significant factor in the understanding of tissue vitality. Nevertheless a single parameter monitoring device is not appropriate and effective in clinical diagnosis of tissue vitality. Therefore we have developed a multi-parametric monitoring system that monitors, in addition to mitochondrial NADH redox state, tissue microcirculatory blood flow, tissue total back-scattered light as an indication of blood volume and blood oxygenation (Hb02). In the present communication a new device named "CritiView" is described. This device was developed in order to enable real time monitoring of the four parameters from various organs in the body. The main medical application of the CritiView is in critical care medicine of patients hospitalized in the Intensive Care Units (ICUs) and intraoperatively in operating rooms. The physiological basis for our clinical monitoring approach is based on the well known response to the development of body emergency situation, such as shock or trauma. Under such conditions a process of blood flow redistribution will give preference to vital organs (Brain, Heart) neglecting less vital organs (Skin, G-I tract or the urinary system). Under such condition the brain will by hyperperfused and O2 supply will increase to provide the need of the activated mitochondria. The non-vital organs will be hypoperfused and mitochondial function will be inhibited leading to energy failure. This differentiation between the two types of organs could be used for the early detection of body deterioration by monitoring of the non-vital organ vitality. A fiber optic sensor was embedded in a Foley catheter, enabling the monitoring of Urethral wall vitality, to serve as an early warning signal of body deterioration.

  7. High velocity pulse biopsy device enables controllable and precise needle insertion and high yield tissue acquisition.

    Science.gov (United States)

    Schässburger, Kai-Uwe; Paepke, Stefan; Saracco, Ariel; Azavedo, Edward; Ekström, Christina; Wiksell, Hans

    2018-02-01

    Minimally invasive biopsies are a cornerstone of breast cancer management with ultrasound being the preferred guidance modality. New developments in breast cancer management and advances in imaging technologies bring new challenges to current biopsy methodologies. A new biopsy device (NeoNavia® biopsy system, 14 G) was developed. It incorporates a pneumatic needle insertion mechanism that is intended to provide better control of needle progression and enable stepwise insertion without noticeable deformation or displacement of surrounding tissue as visualized under ultrasound. A new method of tissue acquisition was designed to achieve a sampling yield higher than standard methodologies. Needle dynamics was assessed on a specifically designed test bed and sampling performance was compared to a Magnum® biopsy instrument (Bard, Covington, GA, USA) in representative tissue models. The histological quality of samples obtained ex-vivo was evaluated. A pneumatic pulse was measured to accelerate the needle to a maximum velocity of 21.2 ± 2.5 m/s on a stroke length of 2.5 mm, achieving significantly higher acceleration, maximum velocity and power than current biopsy devices. Mean weight of samples obtained by the NeoNavia device were 3.5, 4.6, and 4.3 times higher when sampling was performed in turkey breast, calf thymus and swine pancreas, respectively, as compared to samples obtained with the Magnum instrument. Ex-vivo analysis indicates that the method of tissue acquisition has no apparent negative impact on the histopathologic quality of obtained samples. Copyright © 2018 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

  8. A retractable barb needle for drug darts

    Directory of Open Access Journals (Sweden)

    G.L. van Rooyen

    1973-07-01

    Full Text Available The mechanism and action of a new retractable barbneedle for drug darts are described. This dart needle is particularly successful in obviating unnecessary flight reactions andtrauma in darted animals, and facilitates the complete injection of the drug dose before the barb is retracted and the dart is dislogded from the animal. The whole process is completed within a few seconds and the expended dart can usually be retrieved in the immediate vicinity where the animal was darted.

  9. Fabrication and Applications of Micro/Nanostructured Devices for Tissue Engineering

    KAUST Repository

    Limongi, Tania

    2016-09-02

    Nanotechnology allows the realization of new materials and devices with basic structural unit in the range of 1-100 nm and characterized by gaining control at the atomic, molecular, and supramolecular level. Reducing the dimensions of a material into the nanoscale range usually results in the change of its physiochemical properties such as reactivity, crystallinity, and solubility. This review treats the convergence of last research news at the interface of nanostructured biomaterials and tissue engineering for emerging biomedical technologies such as scaffolding and tissue regeneration. The present review is organized into three main sections. The introduction concerns an overview of the increasing utility of nanostructured materials in the field of tissue engineering. It elucidates how nanotechnology, by working in the submicron length scale, assures the realization of a biocompatible interface that is able to reproduce the physiological cell-matrix interaction. The second, more technical section, concerns the design and fabrication of biocompatible surface characterized by micro- and submicroscale features, using microfabrication, nanolithography, and miscellaneous nanolithographic techniques. In the last part, we review the ongoing tissue engineering application of nanostructured materials and scaffolds in different fields such as neurology, cardiology, orthopedics, and skin tissue regeneration.

  10. Fabrication and Applications of Micro/Nanostructured Devices for Tissue Engineering

    KAUST Repository

    Limongi, Tania; Tirinato, Luca; Pagliari, Francesca; Giugni, Andrea; Allione, Marco; Perozziello, Gerardo; Candeloro, Patrizio; Di Fabrizio, Enzo M.

    2016-01-01

    Nanotechnology allows the realization of new materials and devices with basic structural unit in the range of 1-100 nm and characterized by gaining control at the atomic, molecular, and supramolecular level. Reducing the dimensions of a material into the nanoscale range usually results in the change of its physiochemical properties such as reactivity, crystallinity, and solubility. This review treats the convergence of last research news at the interface of nanostructured biomaterials and tissue engineering for emerging biomedical technologies such as scaffolding and tissue regeneration. The present review is organized into three main sections. The introduction concerns an overview of the increasing utility of nanostructured materials in the field of tissue engineering. It elucidates how nanotechnology, by working in the submicron length scale, assures the realization of a biocompatible interface that is able to reproduce the physiological cell-matrix interaction. The second, more technical section, concerns the design and fabrication of biocompatible surface characterized by micro- and submicroscale features, using microfabrication, nanolithography, and miscellaneous nanolithographic techniques. In the last part, we review the ongoing tissue engineering application of nanostructured materials and scaffolds in different fields such as neurology, cardiology, orthopedics, and skin tissue regeneration.

  11. Method and device for bio-impedance measurement with hard-tissue applications

    International Nuclear Information System (INIS)

    Guimerà, A; Calderón, E; Los, P; Christie, A M

    2008-01-01

    Bio-impedance measurements can be used to detect and monitor several properties of living hard-tissues, some of which include bone mineral density, bone fracture healing or dental caries detection. In this paper a simple method and hardware architecture for hard tissue bio-impedance measurement is proposed. The key design aspects of such architecture are discussed and a commercial handheld ac impedance device is presented that is fully certified to international medical standards. It includes a 4-channel multiplexer and is capable of measuring impedances from 10 kΩ to 10 MΩ across a frequency range of 100 Hz to 100 kHz with a maximum error of 5%. The device incorporates several user interface methods and a Bluetooth link for bi-directional wireless data transfer. Low-power design techniques have been implemented, ensuring the device exceeds 8 h of continuous use. Finally, bench test results using dummy cells consisting of parallel connected resistors and capacitors, from 10 kΩ to 10 MΩ and from 20 pF to 100 pF, are discussed

  12. Method and device for bio-impedance measurement with hard-tissue applications.

    Science.gov (United States)

    Guimerà, A; Calderón, E; Los, P; Christie, A M

    2008-06-01

    Bio-impedance measurements can be used to detect and monitor several properties of living hard-tissues, some of which include bone mineral density, bone fracture healing or dental caries detection. In this paper a simple method and hardware architecture for hard tissue bio-impedance measurement is proposed. The key design aspects of such architecture are discussed and a commercial handheld ac impedance device is presented that is fully certified to international medical standards. It includes a 4-channel multiplexer and is capable of measuring impedances from 10 kOmega to 10 MOmega across a frequency range of 100 Hz to 100 kHz with a maximum error of 5%. The device incorporates several user interface methods and a Bluetooth link for bi-directional wireless data transfer. Low-power design techniques have been implemented, ensuring the device exceeds 8 h of continuous use. Finally, bench test results using dummy cells consisting of parallel connected resistors and capacitors, from 10 kOmega to 10 MOmega and from 20 pF to 100 pF, are discussed.

  13. Retracted articles in surgery journals. What are surgeons doing wrong?

    Science.gov (United States)

    Cassão, Bruna Dell'Acqua; Herbella, Fernando A M; Schlottmann, Francisco; Patti, Marco G

    2018-03-08

    Retraction of previously published scientific articles is an important mechanism to preserve the integrity of scientific work. This study analyzed retractions of previously published articles from surgery journals. We searched for retracted articles in the 100 surgery journals with the highest SJR2 indicator grades. We found 130 retracted articles in 49 journals (49%). Five or more retracted articles were published in 8 journals (8%). The mean time between publication and retraction was 26 months (range 1 to 158 months). The United States, China, Germany, Japan, and the United Kingdom accounted for more than 3 out of 4 of the retracted articles. The greatest number of retractions came from manuscripts about orthopedics and traumatology, general surgery, anesthesiology, cardiothoracic surgery, and plastic surgery. Nonsurgeons were responsible for 16% of retractions in these surgery journals. The main reasons for retraction were duplicate publication (42%), plagiarism (16%), absence of proven integrity of the study (14%), incorrect data (13%), data published without authorization (12%), violation of research ethics (11%), documented fraud (11%), request of an author(s) (5%), and unknown (3%). In 25% of the retracted articles, other publications by the same authors also had been retracted. Retraction of published articles does not occur frequently in surgery journals. Some form of scientific misconduct was present in the majority of retractions, especially duplication of publication and plagiarism. Retractions of previously published articles were most frequent from countries with the greatest number of publications; some authors showed recidivism. Copyright © 2018 Elsevier Inc. All rights reserved.

  14. Simultaneous Occurrence of Duane Retraction Syndrome with Marfan Syndrome

    Directory of Open Access Journals (Sweden)

    Mihir Kothari

    2011-01-01

    Full Text Available Marfan syndrome (MFS is an autosomal dominant disorder of connective tissue, while Duane retraction syndrome (DRS is a congenital cranial dysinnervation disorder (CCDD which can be transmitted as autosomal dominant disorder in 5–10% of patients. In this paper, we present an 8-year-old girl who presented with left eye DRS and bilateral subluxation of the lens associated with MFS in absence of familial involvement. To our knowledge this is the first case report of DRS with MFS. The occurrence of these syndromes together is very rare and appears to be coincidental.

  15. Compression instrument for tissue experiments (cite) at the meso-scale: device validation - biomed 2011.

    Science.gov (United States)

    Evans, Douglas W; Rajagopalan, Padma; Devita, Raffaella; Sparks, Jessica L

    2011-01-01

    Liver sinusoidal endothelial cells (LSECs) are the primary site of numerous transport and exchange processes essential for liver function. LSECs rest on a sparse extracellular matrix layer housed in the space of Disse, a 0.5-1LSECs from hepatocytes. To develop bioengineered liver tissue constructs, it is important to understand the mechanical interactions among LSECs, hepatocytes, and the extracellular matrix in the space of Disse. Currently the mechanical properties of space of Disse matrix are not well understood. The objective of this study was to develop and validate a device for performing mechanical tests at the meso-scale (100nm-100m), to enable novel matrix characterization within the space of Disse. The device utilizes a glass micro-spherical indentor attached to a cantilever made from a fiber optic cable. The 3-axis translation table used to bring the specimen in contact with the indentor and deform the cantilever. A position detector monitors the location of a laser passing through the cantilever and allows for the calculation of subsequent tissue deformation. The design allows micro-newton and nano-newton stress-strain tissue behavior to be quantified. To validate the device accuracy, 11 samples of silicon rubber in two formulations were tested to experimentally confirm their Young's moduli. Prior macroscopic unconfined compression tests determined the formulations of EcoFlex030 (n-6) and EcoFlex010 (n-5) to posses Young's moduli of 92.67+-6.22 and 43.10+-3.29 kPa respectively. Optical measurements taken utilizing CITE's position control and fiber optic cantilever found the moduli to be 106.4 kPa and 47.82 kPa.

  16. Low power digital communication in implantable devices using volume conduction of biological tissues.

    Science.gov (United States)

    Yao, Ning; Lee, Heung-No; Sclabassi, R J; Sun, Mingui

    2006-01-01

    This work investigates the data communication problem of implantable devices using fundamental theories in communications. We utilize the volume conduction property of biological tissues to establish a digital communications link. Data obtained through animal experiments are used to analyze the time and frequency response of the volume conduction channel as well as to characterize the biological signals and noises present in the system. A low power bandwidth efficient channel-coded modulation scheme is proposed to conserve battery power and reduce the health risks associated.

  17. Contactless remote induction of shear waves in soft tissues using a transcranial magnetic stimulation device

    International Nuclear Information System (INIS)

    Grasland-Mongrain, Pol; Miller-Jolicoeur, Erika; Cloutier, Guy; Tang, An; Catheline, Stefan

    2016-01-01

    This study presents the first observation of shear waves induced remotely within soft tissues. It was performed through the combination of a transcranial magnetic stimulation device and a permanent magnet. A physical model based on Maxwell and Navier equations was developed. Experiments were performed on a cryogel phantom and a chicken breast sample. Using an ultrafast ultrasound scanner, shear waves of respective amplitudes of 5 and 0.5 μm were observed. Experimental and numerical results were in good agreement. This study constitutes the framework of an alternative shear wave elastography method. (paper)

  18. Contactless remote induction of shear waves in soft tissues using a transcranial magnetic stimulation device

    Science.gov (United States)

    Grasland-Mongrain, Pol; Miller-Jolicoeur, Erika; Tang, An; Catheline, Stefan; Cloutier, Guy

    2016-03-01

    This study presents the first observation of shear waves induced remotely within soft tissues. It was performed through the combination of a transcranial magnetic stimulation device and a permanent magnet. A physical model based on Maxwell and Navier equations was developed. Experiments were performed on a cryogel phantom and a chicken breast sample. Using an ultrafast ultrasound scanner, shear waves of respective amplitudes of 5 and 0.5 μm were observed. Experimental and numerical results were in good agreement. This study constitutes the framework of an alternative shear wave elastography method.

  19. Tissue Variability and Antennas for Power Transfer to Wireless Implantable Medical Devices.

    Science.gov (United States)

    Bocan, Kara N; Mickle, Marlin H; Sejdic, Ervin

    2017-01-01

    The design of effective transcutaneous systems demands the consideration of inevitable variations in tissue characteristics, which vary across body areas, among individuals, and over time. The purpose of this paper was to design and evaluate several printed antenna topologies for ultrahigh frequency (UHF) transcutaneous power transfer to implantable medical devices, and to investigate the effects of variations in tissue properties on dipole and loop topologies. Here, we show that a loop antenna topology provides the greatest achievable gain with the smallest implanted antenna, while a dipole system provides higher impedance for conjugate matching and the ability to increase gain with a larger external antenna. In comparison to the dipole system, the loop system exhibits greater sensitivity to changes in tissue structure and properties in terms of power gain, but provides higher gain when the separation is on the order of the smaller antenna dimension. The dipole system was shown to provide higher gain than the loop system at greater implant depths for the same implanted antenna area, and was less sensitive to variations in tissue properties and structure in terms of power gain at all investigated implant depths. The results show the potential of easily-fabricated, low-cost printed antenna topologies for UHF transcutaneous power, and the importance of environmental considerations in choosing the antenna topology.

  20. Tissue Variability and Antennas for Power Transfer to Wireless Implantable Medical Devices

    Science.gov (United States)

    Bocan, Kara N.; Mickle, Marlin H.

    2017-01-01

    The design of effective transcutaneous systems demands the consideration of inevitable variations in tissue characteristics, which vary across body areas, among individuals, and over time. The purpose of this paper was to design and evaluate several printed antenna topologies for ultrahigh frequency (UHF) transcutaneous power transfer to implantable medical devices, and to investigate the effects of variations in tissue properties on dipole and loop topologies. Here, we show that a loop antenna topology provides the greatest achievable gain with the smallest implanted antenna, while a dipole system provides higher impedance for conjugate matching and the ability to increase gain with a larger external antenna. In comparison to the dipole system, the loop system exhibits greater sensitivity to changes in tissue structure and properties in terms of power gain, but provides higher gain when the separation is on the order of the smaller antenna dimension. The dipole system was shown to provide higher gain than the loop system at greater implant depths for the same implanted antenna area, and was less sensitive to variations in tissue properties and structure in terms of power gain at all investigated implant depths. The results show the potential of easily-fabricated, low-cost printed antenna topologies for UHF transcutaneous power, and the importance of environmental considerations in choosing the antenna topology. PMID:29018637

  1. Rapid maxillary anterior teeth retraction en masse by bone compression: a canine model.

    Directory of Open Access Journals (Sweden)

    Chufeng Liu

    Full Text Available The present study sought to establish an animal model to study the feasibility and safety of rapid retraction of maxillary anterior teeth en masse aided by alveolar surgery in order to reduce orthodontic treatment time.Extraction of the maxillary canine and alveolar surgery were performed on twelve adult beagle dogs. After that, the custom-made tooth-borne distraction devices were placed on beagles' teeth. Nine of the dogs were applied compression at 0.5 mm/d for 12 days continuously. The other three received no force as the control group. The animals were killed in 1, 14, and 28 days after the end of the application of compression.The tissue responses were assessed by craniometric measurement as well as histological examination. Gross alterations were evident in the experimental group, characterized by anterior teeth crossbite. The average total movements of incisors within 12 days were 4.63±0.10 mm and the average anchorage losses were 1.25±0.12 mm. Considerable root resorption extending into the dentine could be observed 1 and 14 days after the compression. But after consolidation of 28 days, there were regenerated cementum on the dentine. There was no apparent change in the control group. No obvious tooth loosening, gingival necrosis, pulp degeneration, or other adverse complications appeared in any of the dogs.This is the first experimental study for testing the technique of rapid anterior teeth retraction en masse aided by modified alveolar surgery. Despite a preliminary animal model study, the current findings pave the way for the potential clinical application that can accelerate orthodontic tooth movement without many adverse complications.It may become a novel method to shorten the clinical orthodontic treatment time in the future.

  2. A simple indentation device for measuring micrometer-scale tissue stiffness

    Energy Technology Data Exchange (ETDEWEB)

    Levental, I; Levental, K R; Janmey, P A [Institute for Medicine and Engineering, University of Pennsylvania, Philadelphia, PA 19104 (United States); Klein, E A; Assoian, R [Department of Pharmacology, University of Pennsylvania, Philadelphia, PA 19104 (United States); Miller, R T [Departments of Medicine and Physiology, Louis Stokes VAMC, Cleveland, OH (United States); Wells, R G, E-mail: janmey@mail.med.upenn.ed [Department of Medicine, University of Pennsylvania, Philadelphia, PA 19104 (United States)

    2010-05-19

    Mechanical properties of cells and extracellular matrices are critical determinants of function in contexts including oncogenic transformation, neuronal synapse formation, hepatic fibrosis and stem cell differentiation. The size and heterogeneity of biological specimens and the importance of measuring their mechanical properties under conditions that resemble their environments in vivo present a challenge for quantitative measurement. Centimeter-scale tissue samples can be measured by commercial instruments, whereas properties at the subcellular (nm) scale are accessible by atomic force microscopy, optical trapping, or magnetic bead microrheometry; however many tissues are heterogeneous on a length scale between micrometers and millimeters which is not accessible to most current instrumentation. The device described here combines two commercially available technologies, a micronewton resolution force probe and a micromanipulator for probing soft biological samples at sub-millimeter spatial resolution. Several applications of the device are described. These include the first measurement of the stiffness of an intact, isolated mouse glomerulus, quantification of the inner wall stiffness of healthy and diseased mouse aortas, and evaluation of the lateral heterogeneity in the stiffness of mouse mammary glands and rat livers with correlation of this heterogeneity with malignant or fibrotic pathology as evaluated by histology.

  3. Compensating for Tissue Changes in an Ultrasonic Power Link for Implanted Medical Devices.

    Science.gov (United States)

    Vihvelin, Hugo; Leadbetter, Jeff; Bance, Manohar; Brown, Jeremy A; Adamson, Robert B A

    2016-04-01

    Ultrasonic power transfer using piezoelectric devices is a promising wireless power transfer technology for biomedical implants. However, for sub-dermal implants where the separation between the transmitter and receiver is on the order of several acoustic wavelengths, the ultrasonic power transfer efficiency (PTE) is highly sensitive to the distance between the transmitter and receiver. This sensitivity can cause large swings in efficiency and presents a serious limitation on battery life and overall performance. A practical ultrasonic transcutaneous energy transfer (UTET) system design must accommodate different implant depths and unpredictable acoustic changes caused by tissue growth, hydration, ambient temperature, and movement. This paper describes a method used to compensate for acoustic separation distance by varying the transmit (Tx) frequency in a UTET system. In a benchtop UTET system we experimentally show that without compensation, power transfer efficiency can range from 9% to 25% as a 5 mm porcine tissue sample is manipulated to simulate in situ implant conditions. Using an active frequency compensation method, we show that the power transfer efficiency can be kept uniformly high, ranging from 20% to 27%. The frequency compensation strategy we propose is low-power, non-invasive, and uses only transmit-side measurements, making it suitable for active implanted medical device applications.

  4. Soft tissue conduction as a possible contributor to the limited attenuation provided by hearing protection devices

    Directory of Open Access Journals (Sweden)

    Shai Chordekar

    2016-01-01

    Full Text Available Context: Damage to the auditory system by loud sounds can be avoided by hearing protection devices (HPDs such as earmuffs, earplugs, or both for maximum attenuation. However, the attenuation can be limited by air conduction (AC leakage around the earplugs and earmuffs by the occlusion effect (OE and by skull vibrations initiating bone conduction (BC. Aims: To assess maximum attenuation by HPDs and possible flanking pathways to the inner ear. Subjects and Methods: AC attenuation and resulting thresholds were assessed using the real ear attenuation at threshold (REAT procedure on 15 normal-hearing participants in four free-field conditions: (a unprotected ears, (b ears covered with earmuffs, (c ears blocked with deeply inserted customized earplugs, and (d ears blocked with both earplugs and earmuffs. BC thresholds were assessed with and without earplugs to assess the OE. Results: Addition of earmuffs to earplugs did not cause significantly greater attenuation than earplugs alone, confirming minimal AC leakage through the external meatus and the absence of the OE. Maximum REATs ranged between 40 and 46 dB, leading to thresholds of 46–54 dB HL. Furthermore, calculation of the acoustic impedance mismatch between air and bone predicted at least 60 dB attenuation of BC. Conclusion: Results do not support the notion that skull vibrations (BC contributed to the limited attenuation provided by traditional HPDs. An alternative explanation, supported by experimental evidence, suggests transmission of sound to inner ear via non-osseous pathways such as skin, soft tissues, and fluid. Because the acoustic impedance mismatch between air and soft tissues is smaller than that between air and bone, air-borne sounds would be transmitted to soft tissues more effectively than to bone, and therefore less attenuation is expected through soft tissue sound conduction. This can contribute to the limited attenuation provided by traditional HPDs. The present study

  5. Rod-based Fabrication of Customizable Soft Robotic Pneumatic Gripper Devices for Delicate Tissue Manipulation.

    Science.gov (United States)

    Low, Jin-Huat; Yeow, Chen-Hua

    2016-08-02

    Soft compliant gripping is essential in delicate surgical manipulation for minimizing the risk of tissue grip damage caused by high stress concentrations at the point of contact. It can be achieved by complementing traditional rigid grippers with soft robotic pneumatic gripper devices. This manuscript describes a rod-based approach that combined both 3D-printing and a modified soft lithography technique to fabricate the soft pneumatic gripper. In brief, the pneumatic featureless mold with chamber component is 3D-printed and the rods were used to create the pneumatic channels that connect to the chamber. This protocol eliminates the risk of channels occluding during the sealing process and the need for external air source or related control circuit. The soft gripper consists of a chamber filled with air, and one or more gripper arms with a pneumatic channel in each arm connected to the chamber. The pneumatic channel is positioned close to the outer wall to create different stiffness in the gripper arm. Upon compression of the chamber which generates pressure on the pneumatic channel, the gripper arm will bend inward to form a close grip posture because the outer wall area is more compliant. The soft gripper can be inserted into a 3D-printed handling tool with two different control modes for chamber compression: manual gripper mode with a movable piston, and robotic gripper mode with a linear actuator. The double-arm gripper with two actuatable arms was able to pick up objects of sizes up to 2 mm and yet generate lower compressive forces as compared to elastomer-coated and non-coated rigid grippers. The feasibility of having other designs, such as single-arm or hook gripper, was also demonstrated, which further highlighted the customizability of the soft gripper device, and it's potential to be used in delicate surgical manipulation to reduce the risk of tissue grip damage.

  6. Novel wearable-type biometric devices based on skin tissue optics with multispectral LED-photodiode matrix

    Science.gov (United States)

    Jo, Young Chang; Kim, Hae Na; Kang, Jae Hwan; Hong, Hyuck Ki; Choi, Yeon Shik; Jung, Suk Won; Kim, Sung Phil

    2017-04-01

    In this study, we examined the possibility of using a multispectral skin photomatrix (MSP) module as a novel biometric device. The MSP device measures optical patterns of the wrist skin tissue. Optical patterns consist of 2 × 8 photocurrent intensities of photodiode arrays, which are generated by optical transmission and diffuse reflection of photons from LED light sources with variable wavelengths into the wrist skin tissue. Optical patterns detected by the MSP device provide information on both the surface and subsurface characteristics of the human skin tissue. We found that in the 21 subjects we studied, they showed their unique characteristics, as determined using several wavelengths of light. The experimental results show that the best personal identification accuracy can be acquired using a combination of infrared light and yellow light. This novel biometric device, the MSP module, exhibited an excellent false acceptance rate (FAR) of 0.3% and a false rejection rate (FRR) of 0.0%, which are better than those of commercialized biometric devices such as a fingerprint biometric system. From these experimental results, we found that people exhibit unique optical patterns of their inner-wrist skin tissue and this uniqueness could be used for developing novel high-accuracy personal identification devices.

  7. Retracted Publications in the Biomedical Literature from Open Access Journals.

    Science.gov (United States)

    Wang, Tao; Xing, Qin-Rui; Wang, Hui; Chen, Wei

    2018-03-07

    The number of articles published in open access journals (OAJs) has increased dramatically in recent years. Simultaneously, the quality of publications in these journals has been called into question. Few studies have explored the retraction rate from OAJs. The purpose of the current study was to determine the reasons for retractions of articles from OAJs in biomedical research. The Medline database was searched through PubMed to identify retracted publications in OAJs. The journals were identified by the Directory of Open Access Journals. Data were extracted from each retracted article, including the time from publication to retraction, causes, journal impact factor, and country of origin. Trends in the characteristics related to retraction were determined. Data from 621 retracted studies were included in the analysis. The number and rate of retractions have increased since 2010. The most common reasons for retraction are errors (148), plagiarism (142), duplicate publication (101), fraud/suspected fraud (98) and invalid peer review (93). The number of retracted articles from OAJs has been steadily increasing. Misconduct was the primary reason for retraction. The majority of retracted articles were from journals with low impact factors and authored by researchers from China, India, Iran, and the USA.

  8. Radiation therapy apparatus having retractable beam stopper

    International Nuclear Information System (INIS)

    Coad, G.L.

    1983-01-01

    This invention relates to a radiation therapy apparatus which utilized a linear translation mechanism for positioning a beam stopper. An apparatus is described wherein the beam stopper is pivotally attached to the therapy machine with an associated drive motor in such a way that the beam stopper retracts linearly

  9. Article retracted, but the message lives on.

    Science.gov (United States)

    Greitemeyer, Tobias

    2014-04-01

    The retraction of an original article aims to ensure that readers are alerted to the fact that the findings are not trustworthy. However, the present research suggests that individuals still believe in the findings of an article even though they were later told that the data were fabricated and that the article was retracted. Participants in a debriefing condition and a no-debriefing condition learned about the scientific finding of an empirical article, whereas participants in a control condition did not. Afterward, participants in the debriefing condition were told that the article had been retracted because of fabricated data. Results showed that participants in the debriefing condition were less likely to believe in the findings than participants in the no-debriefing condition but were more likely to believe in the findings than participants in the control condition, suggesting that individuals do adjust their beliefs in the perceived truth of a scientific finding after debriefing-but insufficiently. Mediational analyses revealed that the availability of generated causal arguments underlies belief perseverance. These results suggest that a retraction note of an empirical article in a scientific journal is not sufficient to ensure that readers of the original article no longer believe in the article's conclusions.

  10. Characteristics of retractions related to faked peer reviews: an overview.

    Science.gov (United States)

    Qi, Xingshun; Deng, Han; Guo, Xiaozhong

    2017-08-01

    A faked peer review is a novel cause for retraction. We reviewed the characteristics of papers retracted due to a faked peer review. All papers retracted due to faked peer reviews were identified by searching the Retraction Watch website and by conducting a manual search. All identified papers were confirmed in published journals. The information of retracted papers was collected, which primarily included publisher, journal, journal impact factor, country, as well as publication and retraction year. Overall, 250 retracted papers were identified. They were published in 48 journals by six publishers. The top 5 journals included the Journal of Vibration and Control (24.8%), Molecular Biology Reports (11.6%), Immunopharmacology and Immunotoxicology (8.0%), Tumour Biology (6.8%) and European Journal of Medical Research (6.4%). The publishers included SAGE (31%), Springer (26%), BioMed Central (18%), Elsevier (13%), Informa (11%) and LWW (1%). A minority (4%) of retracted papers were published in Science Citation Index (SCI) journals with an impact factor of >5. A majority (74.8%) of retracted papers were written by Chinese researchers. In terms of the publication year, the retracted papers were published since 2010, and the number of retracted papers peaked in 2014 (40.8%). In terms of the retraction year, the retractions started in 2012, and the number of retractions peaked in 2015 (59.6%). The number of papers retracted due to faked peer reviews differs largely among journals and countries. With the improvement of the peer review mechanism and increased education about publishing ethics, such academic misconduct may gradually disappear in future. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  11. Tissue quality assessment using a novel direct elasticity assessment device (the E-finger: a cadaveric study of prostatectomy dissection.

    Directory of Open Access Journals (Sweden)

    Daniel W Good

    Full Text Available Minimally invasive radical prostatectomy (RP (robotic and laparoscopic, have brought improvements in the outcomes of RP due to improved views and increased degrees of freedom of surgical devices. Robotic and laparoscopic surgeries do not incorporate haptic feedback, which may result in complications secondary to inadequate tissue dissection (causing positive surgical margins, rhabdosphincter damage, etc. We developed a micro-engineered device (6 mm2 sized [E-finger] capable of quantitative elasticity assessment, with amplitude ratio, mean ratio and phase lag representing this. The aim was to assess the utility of the device in differentiating peri-prostatic tissue types in order to guide prostate dissection.Two embalmed and 2 fresh frozen cadavers were used in the study. Baseline elasticity values were assessed in bladder, prostate and rhabdosphincter of pre-dissected embalmed cadavers using the micro-engineered device. A measurement grid was created to span from the bladder, across the prostate and onto the rhabdosphincter of fresh frozen cadavers to enable a systematic quantitative elasticity assessment of the entire area by 2 independent assessors. Tissue was sectioned along each row of elasticity measurement points, and stained with haematoxylin and eosin (H&E. Image analysis was performed with Image Pro Premier to determine the histology at each measurement point.Statistically significant differences in elasticity were identified between bladder, prostate and sphincter in both embalmed and fresh frozen cadavers (p = < 0.001. Intra-class correlation (ICC reliability tests showed good reliability (average ICC = 0.851. Sensitivity and specificity for tissue identification was 77% and 70% respectively to a resolution of 6 mm2.This cadaveric study has evaluated the ability of our elasticity assessment device to differentiate bladder, prostate and rhabdosphincter to a resolution of 6 mm2. The results provide useful data for which to continue to

  12. Input and output for surgical simulation: devices to measure tissue properties in vivo and a haptic interface for laparoscopy simulators.

    Science.gov (United States)

    Ottensmeyer, M P; Ben-Ur, E; Salisbury, J K

    2000-01-01

    Current efforts in surgical simulation very often focus on creating realistic graphical feedback, but neglect some or all tactile and force (haptic) feedback that a surgeon would normally receive. Simulations that do include haptic feedback do not typically use real tissue compliance properties, favoring estimates and user feedback to determine realism. When tissue compliance data are used, there are virtually no in vivo property measurements to draw upon. Together with the Center for Innovative Minimally Invasive Therapy at the Massachusetts General Hospital, the Haptics Group is developing tools to introduce more comprehensive haptic feedback in laparoscopy simulators and to provide biological tissue material property data for our software simulation. The platform for providing haptic feedback is a PHANToM Haptic Interface, produced by SensAble Technologies, Inc. Our devices supplement the PHANToM to provide for grasping and optionally, for the roll axis of the tool. Together with feedback from the PHANToM, which provides the pitch, yaw and thrust axes of a typical laparoscopy tool, we can recreate all of the haptic sensations experienced during laparoscopy. The devices integrate real laparoscopy toolhandles and a compliant torso model to complete the set of visual and tactile sensations. Biological tissues are known to exhibit non-linear mechanical properties, and change their properties dramatically when removed from a living organism. To measure the properties in vivo, two devices are being developed. The first is a small displacement, 1-D indenter. It will measure the linear tissue compliance (stiffness and damping) over a wide range of frequencies. These data will be used as inputs to a finite element or other model. The second device will be able to deflect tissues in 3-D over a larger range, so that the non-linearities due to changes in the tissue geometry will be measured. This will allow us to validate the performance of the model on large tissue

  13. Tissue quality assessment using a novel direct elasticity assessment device (the E-finger): a cadaveric study of prostatectomy dissection.

    Science.gov (United States)

    Good, Daniel W; Khan, Ashfaq; Hammer, Steven; Scanlan, Paul; Shu, Wenmiao; Phipps, Simon; Parson, Simon H; Stewart, Grant D; Reuben, Robert; McNeill, S Alan

    2014-01-01

    Minimally invasive radical prostatectomy (RP) (robotic and laparoscopic), have brought improvements in the outcomes of RP due to improved views and increased degrees of freedom of surgical devices. Robotic and laparoscopic surgeries do not incorporate haptic feedback, which may result in complications secondary to inadequate tissue dissection (causing positive surgical margins, rhabdosphincter damage, etc). We developed a micro-engineered device (6 mm2 sized) [E-finger]) capable of quantitative elasticity assessment, with amplitude ratio, mean ratio and phase lag representing this. The aim was to assess the utility of the device in differentiating peri-prostatic tissue types in order to guide prostate dissection. Two embalmed and 2 fresh frozen cadavers were used in the study. Baseline elasticity values were assessed in bladder, prostate and rhabdosphincter of pre-dissected embalmed cadavers using the micro-engineered device. A measurement grid was created to span from the bladder, across the prostate and onto the rhabdosphincter of fresh frozen cadavers to enable a systematic quantitative elasticity assessment of the entire area by 2 independent assessors. Tissue was sectioned along each row of elasticity measurement points, and stained with haematoxylin and eosin (H&E). Image analysis was performed with Image Pro Premier to determine the histology at each measurement point. Statistically significant differences in elasticity were identified between bladder, prostate and sphincter in both embalmed and fresh frozen cadavers (p = elasticity assessment device to differentiate bladder, prostate and rhabdosphincter to a resolution of 6 mm2. The results provide useful data for which to continue to examine the use of elasticity assessment devices for tissue quality assessment with the aim of giving haptic feedback to surgeons performing complex surgery.

  14. Soldered Power Arm: An Easy and Effective Method for Intrusion and Retraction of Anterior Teeth

    Directory of Open Access Journals (Sweden)

    Ketan K Vakil

    2014-01-01

    Full Text Available The orthodontic correction of deep overbite can be achieved with several mechanisms that will result in true intrusion of anterior teeth, extrusion of posterior teeth, or a combination of both. For the orthodontic correction of bimaxillary dentoalveolar protrusion with deep bite, there are several treatment modalities like segmented arch approach, retraction and intrusion utility arches, temporary anchorage devices. Though not a novel therapeutic concept, the use of miniscrew implants to obtain absolute anchorage has recently become very popular in clinical orthodontic approaches. To allow the use of sliding mechanics for bodily retraction with intrusion of anterior teeth, we devised a soldered power arm (SPA on standard molar tube. It is simple, stable, precise and effective in cases where anterior teeth need to be simultaneously retracted and intruded. A power arm can be readily fabricated from 20 gauge stainless steel wire and soldered on the molar buccal tube so as to avoid any distortion or loosening of power arm from molar tube during the course of the treatment. The SPA works efficiently with the molar being stabilized in all three planes of space. The resultant force vector is directed more apically toward the center of resistance of the anchor unit, which resulted in the treatment outcome of retraction and intrusion of the anterior teeth and correction of the deep bite.

  15. An electrical impedance tomography (EIT) multi-electrode needle-probe device for local assessment of heterogeneous tissue impeditivity.

    Science.gov (United States)

    Meroni, Davide; Maglioli, Camilla Carpano; Bovio, Dario; Greco, Francesco G; Aliverti, Andrea

    2017-07-01

    Electrical Impedance Tomography (EIT) is an image reconstruction technique applied in medicine for the electrical imaging of living tissues. In literature there is the evidence that a large resistivity variation related to the differences of the human tissues exists. As a result of this interest for the electrical characterization of the biological samples, recently the attention is also focused on the identification and characterization of the human tissue, by studying the homogeneity of its structure. An 8 electrodes needle-probe device has been developed with the intent of identifying the structural inhomogeneities under the surface layers. Ex-vivo impeditivity measurements, by placing the needle-probe in 5 different patterns of fat and lean porcine tissue, were performed, and impeditivity maps were obtained by EIDORS open source software for image reconstruction in electrical impedance. The values composing the maps have been analyzed, pointing out a good tissue discrimination, and the conformity with the real images. We conclude that this device is able to perform impeditivity maps matching to reality for position and orientation. In all the five patterns presented is possible to identify and replicate correctly the heterogeneous tissue under test. This new procedure can be helpful to the medical staff to completely characterize the biological sample, in different unclear situations.

  16. Soldered Power Arm: An Easy and Effective Method for Intrusion and Retraction of Anterior Teeth

    OpenAIRE

    Ketan K Vakil; Pawankumar Dnyandeo Tekale; Jeegar K Vakil

    2014-01-01

    The orthodontic correction of deep overbite can be achieved with several mechanisms that will result in true intrusion of anterior teeth, extrusion of posterior teeth, or a combination of both. For the orthodontic correction of bimaxillary dentoalveolar protrusion with deep bite, there are several treatment modalities like segmented arch approach, retraction and intrusion utility arches, temporary anchorage devices. Though not a novel therapeutic concept, the use of miniscrew implants to obta...

  17. Design of a factorial experiment with randomization restrictions to assess medical device performance on vascular tissue.

    Science.gov (United States)

    Diestelkamp, Wiebke S; Krane, Carissa M; Pinnell, Margaret F

    2011-05-20

    Energy-based surgical scalpels are designed to efficiently transect and seal blood vessels using thermal energy to promote protein denaturation and coagulation. Assessment and design improvement of ultrasonic scalpel performance relies on both in vivo and ex vivo testing. The objective of this work was to design and implement a robust, experimental test matrix with randomization restrictions and predictive statistical power, which allowed for identification of those experimental variables that may affect the quality of the seal obtained ex vivo. The design of the experiment included three factors: temperature (two levels); the type of solution used to perfuse the artery during transection (three types); and artery type (two types) resulting in a total of twelve possible treatment combinations. Burst pressures of porcine carotid and renal arteries sealed ex vivo were assigned as the response variable. The experimental test matrix was designed and carried out as a split-plot experiment in order to assess the contributions of several variables and their interactions while accounting for randomization restrictions present in the experimental setup. The statistical software package SAS was utilized and PROC MIXED was used to account for the randomization restrictions in the split-plot design. The combination of temperature, solution, and vessel type had a statistically significant impact on seal quality. The design and implementation of a split-plot experimental test-matrix provided a mechanism for addressing the existing technical randomization restrictions of ex vivo ultrasonic scalpel performance testing, while preserving the ability to examine the potential effects of independent factors or variables. This method for generating the experimental design and the statistical analyses of the resulting data are adaptable to a wide variety of experimental problems involving large-scale tissue-based studies of medical or experimental device efficacy and performance.

  18. Fixation Strength of Polyetheretherketone Sheath-and-Bullet Device for Soft Tissue Repair in the Foot and Ankle.

    Science.gov (United States)

    Christensen, Jay; Fischer, Brian; Nute, Michael; Rizza, Robert

    Tendon transfers are often performed in the foot and ankle. Recently, interference screws have been a popular choice owing to their ease of use and fixation strength. Considering the benefits, one disadvantage of such devices is laceration of the soft tissues by the implant threads during placement that potentially weaken the structural integrity of the grafts. A shape memory polyetheretherketone bullet-in-sheath tenodesis device uses circumferential compression, eliminating potential damage from thread rotation and maintaining the soft tissue orientation of the graft. The aim of this study was to determine the pullout strength and failure mode for this device in both a synthetic bone analogue and porcine bone models. Thirteen mature bovine extensor tendons were secured into ten 4.0 × 4.0 × 4.0-cm cubes of 15-pound per cubic foot solid rigid polyurethane foam bone analogue models or 3 porcine femoral condyles using the 5 × 20-mm polyetheretherketone soft tissue anchor. The bullet-in-sheath device demonstrated a mean pullout of 280.84 N in the bone analog models and 419.47 N in the porcine bone models. (p = .001). The bullet-in-sheath design preserved the integrity of the tendon graft, and none of the implants dislodged from their original position. Copyright © 2017 The American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.

  19. Tissue kerma vs distance relationships for initial nuclear radiation from the atomic devices detonated over Hiroshima and Nagasaki

    International Nuclear Information System (INIS)

    Kerr, G.D.; Pace, J.V. III; Scott, W.H. Jr.

    1983-06-01

    Initial nuclear radiation is comprised of prompt neutrons and prompt primary gammas from an exploding nuclear device, prompt secondary gammas produced by neutron interactions in the environment, and delayed neutrons and delayed fission-product gammas from the fireball formed after the nuclear device explodes. These various components must all be considered in establishing tissue kerma vs distance relationships which describe the decrease of initial nuclear radiation with distance in Hiroshima and in Nagasaki. The tissue kerma at ground evel from delayed fission-product gammas and delayed neutrons was investigated using the NUIDEA code developed by Science Applications, Inc. This code incorporates very detailed models which can take into account such features as the rise of the fireball, the rapid radioactive decay of fission products in it, and the perturbation of the atmosphere by the explosion. Tissue kerma vs distance relationships obtained by summing results of these current state-of-the-art calculations will be discussed. Our results clearly show that the prompt secondary gammas and delayed fission-product gammas are the dominant components of total tissue kerma from initial nuclear radiation in the cases of the atomic (or pure-fission) devices detonated over Hiroshima and Nagasaki

  20. A Device and Procedure for Immobilization of Patients Receiving Limb-Preserving Radiotherapy for Soft Tissue Sarcoma

    International Nuclear Information System (INIS)

    Dickie, Colleen I.; Parent, Amy; Griffin, Anthony; Craig, Tim; Catton, Charles; Chung, Peter; Panzarella, Tony; O'Sullivan, Brian; Sharpe, Michael

    2009-01-01

    The purpose of this study was to determine the accuracy and efficiency of a custom-designed immobilization device for patients with extremity soft-tissue sarcoma. The custom device consisted of a thermoplastic shell, vacuum pillow, and adaptable baseplate. The study included patients treated from January 2005 to March 2007, with 92 patients immobilized with the custom device and 98 with an established standard. Setup times for these cohorts were analyzed retrospectively for conformal and intensity modulated radiotherapy techniques (IMRT). Thigh tumor setup times were analyzed independently. A subset of patients treated with IMRT was analyzed for setup error using the radiographically verified isocenter position measured daily with electronic portal imaging and cone-beam computed tomography. Mean setup time was reduced by 2.2 minutes when using the custom device for conformal treatment (p = 0.03) and by 5.8 min for IMRT of thigh tumors (p = 0.009). All other setup time comparisons were not significant. A significant systematic error reduction was seen in all directions using the custom device. Random error standard deviations favored the custom device. The custom device offers immobilization advantages. Patient setup time was reduced for conformal techniques and IMRT of thigh tumors. Positioning uncertainty was improved, permitting a reduction of the planning target volume margin by 2 to 4 mm.

  1. Retraction: Statement of Retraction: Khaki-khatibi F, Yaghoubi A.R ...

    African Journals Online (AJOL)

    The article has been retracted upon the request of the corresponding author, Khaki-khatibi F, due to admitted plagiarism. However, this constitutes a violation of publication ethics. It is a breach of warranties made by the author with respect to originality upon which we received, peer-reviewed, accepted and published the ...

  2. The design and development of a high-throughput magneto-mechanostimulation device for cartilage tissue engineering.

    Science.gov (United States)

    Brady, Mariea A; Vaze, Reva; Amin, Harsh D; Overby, Darryl R; Ethier, C Ross

    2014-02-01

    To recapitulate the in vivo environment and create neo-organoids that replace lost or damaged tissue requires the engineering of devices, which provide appropriate biophysical cues. To date, bioreactors for cartilage tissue engineering have focused primarily on biomechanical stimulation. There is a significant need for improved devices for articular cartilage tissue engineering capable of simultaneously applying multiple biophysical (electrokinetic and mechanical) stimuli. We have developed a novel high-throughput magneto-mechanostimulation bioreactor, capable of applying static and time-varying magnetic fields, as well as multiple and independently adjustable mechanical loading regimens. The device consists of an array of 18 individual stations, each of which uses contactless magnetic actuation and has an integrated Hall Effect sensing system, enabling the real-time measurements of applied field, force, and construct thickness, and hence, the indirect measurement of construct mechanical properties. Validation tests showed precise measurements of thickness, within 14 μm of gold standard calliper measurements; further, applied force was measured to be within 0.04 N of desired force over a half hour dynamic loading, which was repeatable over a 3-week test period. Finally, construct material properties measured using the bioreactor were not significantly different (p=0.97) from those measured using a standard materials testing machine. We present a new method for articular cartilage-specific bioreactor design, integrating combinatorial magneto-mechanostimulation, which is very attractive from functional and cost viewpoints.

  3. Rate of retraction of anterior teeth after canine distraction

    Directory of Open Access Journals (Sweden)

    Litesh Singla

    2017-01-01

    Full Text Available Background and Objectives: Orthodontists have always strived to develop a new technique to reduce the treatment time with minimal patient cooperation. Canine distraction was introduced as an alternative technique for canine retraction in a minimum possible period of 3 weeks, thus avoiding taxing the anchorage by molars since the canines are retracted within the lag phase of molars. It has been proved by numerous studies that the bone mesial to canine after rapid canine distraction through the extraction socket is a new and immature. The objectives of this study were to evaluate the rate of retraction of anterior teeth, the time taken, and anchorage loss during the retraction of anterior teeth into this newly organized bone. Methods: Six orthodontic patients who required first premolar extractions were selected. Undermining of the interseptal bone distal to the canine was done, and canines were retracted into the extraction space of the first premolar, using a custom-made tooth borne intraoral distraction screw, following which the incisors were retracted into the newly formed bone using closing loops. The patients were called at weekly intervals to measure the amount of space left between canine and lateral incisor, and the rate of retraction was calculated after space was closed. Results: The present study showed that the rate of retraction of mandibular and maxillary teeth was 0.74 ± 0.39 mm and 0.73 ± 0.15 mm/week, respectively. The anchorage loss was found to be 1.83 ± 0.29 mm and 2.08 ± 0.38 mm in mandibular and maxillary arches, respectively. The time taken to retract the incisors was found to be 40.3 ± 1.5 and 41.7 ± 0.6 days for mandibular and maxillary arches, respectively. Interpretation and Conclusion: Retraction of incisors is faster in both maxillary and mandibular arches when the incisors are retracted immediately into the immature bone created after canine distraction.

  4. [Imaging manifestations and pathologic basis for hepatic capsular retraction syndrome caused by benign and malignant liver tumors].

    Science.gov (United States)

    Ou, Youkuan; Xiao, Enhua; Shang, Quanliang; Chen, Juan

    2015-10-01

    To investigate the imaging manifestations of CT, MRI and pathological basis for hepatic capsular retraction syndrome caused by benign and malignant liver tumors.
 CT or MRI images and pathological features for hepatic capsular retraction syndrome were retrospectively analyzed in 50 patients with benign and malignant liver tumors. Picture archive and communication system (PACS) was used to observe and compare the morphology, size, width, depth, edge of the capsular retraction and the status of liquid under the liver capsule. The structure, differentiation and proliferation of the tumor were analyzed under the microscope.
 There were malignant liver tumors in 44 patients and benign tumor in 6 patients. The smooth or rough for the edge of capsular retraction was significant difference between the benign tumors and the malignant tumors with three differentiated grades (all PBenign and malignant hepatic tumors may appear capsule retraction syndrome, but there are morphological differences between them. The differences are closely related with the lesion size, differentiated degree of tumor and fibrous tissue proliferation.

  5. Retracted: Effect of Paris polyphylla extract on seconddegree burns ...

    African Journals Online (AJOL)

    2018-01-26

    Jan 26, 2018 ... This article previously published in Volume 15 Issue 10 of this journal in October 2016 has been retracted in line with the guidelines from the Committee on Publication Ethics (COPE, http://publicationethics.org/resources/guidelines). Retracted: Ma Z, Yin W, Hu G, Zhu Z, Huang Z. Effect of Paris polyphylla ...

  6. Can Rotational Atherectomy Cause Thermal Tissue Damage? A Study of the Potential Heating and Thermal Tissue Effects of a Rotational Atherectomy Device

    International Nuclear Information System (INIS)

    Gehani, Abdurrazzak A.; Rees, Michael R.

    1998-01-01

    Purpose: Thermal tissue damage (TTD) is customarily associated with some lasers. The thermal potential of rotational atherectomy (RA) devices is unknown. We investigated the temperature profile and potential TTD as well as the value of fluid flushing of an RA device. Methods: We used a high-resolution infrared imaging system that can detect changes as small as 0.1 deg. C to measure the temperature changes at the tip of a fast RA device with and without fluid flushing. To assess TTD, segments of porcine aorta were subjected to the rotating tip under controlled conditions, stained by a special histochemical stain (picrisirius red) and examined under normal and polarized light microscopy. Results: There was significant heating of the rotating cam. The mean 'peak' temperature rise was 52.8 ± 16.9 deg. C. This was related to rotational speed; thus the 'peak' temperature rise was 88.3 ± 12.6 deg. C at 80,000 rpm and 17.3 ± 3.8 deg. C at 20,000 rpm (p < 0.001, t-test). Fluid flushing at 18 ml/min reduced, but did not abolish, heating of the device (11.8 ± 2.9 deg. C). A crater was observed in all segments exposed to the rotating tip. The following features were most notable: (i) A zone of 'thermal' tissue damage extended radially from the crater reaching adventitia in some sections, especially at high speeds. This zone showed markedly reduced or absent birefringence. (ii) Fluid flushing of the catheter reduced the above changes but increased the incidence and extent of dissections in the media, especially when combined with high atherectomy speeds. (iii) These changes were observed in five of six specimens exposed to RA without flushing, but in only one of six with flushing (p < 0.05). (iv) None of the above changes was seen in control segments. Conclusion: RA is capable of generating significant heat and potential TTD. Fluid flushing reduced heating and TTD. These findings warrant further studies in vivo, and may influence the design of atherectomy devices

  7. Publication misconduct and plagiarism retractions: a systematic, retrospective study.

    Science.gov (United States)

    Stretton, Serina; Bramich, Narelle J; Keys, Janelle R; Monk, Julie A; Ely, Julie A; Haley, Cassandra; Woolley, Mark J; Woolley, Karen L

    2012-10-01

    To investigate whether plagiarism is more prevalent in publications retracted from the medical literature when first authors are affiliated with lower-income countries versus higher-income countries. Secondary objectives included investigating other factors associated with plagiarism (e.g., national language of the first author's country affiliation, publication type, journal ranking). Systematic, controlled, retrospective, bibliometric study. Retracted publications dataset in MEDLINE (search filters: English, human, January 1966-February 2008). Retracted misconduct publications were classified according to the first author's country affiliation, country income level, and country national language, publication type, and ranking of the publishing journal. Standardised definitions and data collection tools were used; data were analysed (odds ratio [OR], 95% confidence limits [CL], chi-squared tests) by an independent academic statistician. Of the 213 retracted misconduct publications, 41.8% (89/213) were retracted for plagiarism, 52.1% (111/213) for falsification/fabrication, 2.3% (5/213) for author disputes, 2.3% (5/213) for ethical issues, and 1.4% (3/213) for unknown reasons. The OR (95% CL) of plagiarism retractions (other misconduct retractions as reference) were higher (P 1 retraction) with publications retracted for plagiarism (11.5%, 9/78) than other types of misconduct (28.9%, 24/83). This is the first study to demonstrate that publications retracted for plagiarism are significantly associated with first authors affiliated with lower-income countries. These findings have implications for developing appropriate evidence-based strategies and allocation of resources to help mitigate plagiarism misconduct.

  8. A controllable tactile device for human-like tissue realization using smart magneto-rheological fluids: fabrication and modeling

    Science.gov (United States)

    Cha, Seung-Woo; Kang, Seok-Rae; Hwang, Yong-Hoon; Oh, Jong-Seok; Choi, Seung-Bok

    2018-06-01

    This paper proposes a new tactile device to realize the force of human-like organs using the viscoelastic property by combing a smart magneto-rheological (MR) fluid with a sponge (MR sponge in short). The effectiveness of the sensor is validated through the comparison of the force obtained through measurement and the proposed prediction model. As the first step, a conventional standard linear solid model is adopted to independently investigate the force characteristics of MR fluid and sponge. Force is measured using a 3-axis robot with a force sensor to obtain certain properties of MR fluid and sponge. In addition, to show that the proposed MR sponge can realize the force of human-like tissues, experiments are performed using three specimens, i.e., porcine heart, lung, and liver. Subsequently, a quasi-static model for predicting the field-dependent force of the MR sponge is formulated using empirical values. It is demonstrated through comparison that the proposed force model can accurately predict the force of the specimens without significant error. In addition, a psychophysical test is carried out by ordinary subjects to validate the effectiveness of the proposed tactile device. Results show that the MR sponge tactile device can easily produce various levels of the force of human-like tissues, such as the liver and lung of the porcine, by controlling input current.

  9. Visibility of retractions: a cross-sectional one-year study.

    Science.gov (United States)

    Decullier, Evelyne; Huot, Laure; Samson, Géraldine; Maisonneuve, Hervé

    2013-06-19

    Retraction in Medline medical literature experienced a tenfold increase between 1999 and 2009, however retraction remains a rare event since it represents 0.02% of publications. Retractions used to be handled following informal practices until they were formalized in 2009 by the Committee on Publication Ethics (COPE). The objective of our study was to describe the compliance to these guidelines. All retractions published in 2008 were identified using the Medline publication type "retraction of publication". The notices of retraction and the original articles were retrieved. For each retraction, we identified the reason for retraction, the country of affiliation of the first author, the time to retraction, the impact factor of the journal and the mention of retraction on the original article. Overall, 244 retractions were considered for analysis. Formal retraction notices could not be retrieved for 9. Of the 235 retractions available (96%), the reason was not detailed for 21 articles (9%). The most cited reasons were mistakes (28%), plagiarism (20%), fraud (14%) and overlap (11%). The original paper or its location was found for 233 retractions (95%). Of these, 22% were available with no mention of the retraction. A standard retraction form could be helpful, with a check list of major reason, leaving the editor free to provide the reader with any further information. Original articles should remain available with a clear mention of the retraction.

  10. Cryopreserved recombinant tissue plasminogen activator for the restoration of occluded central venous access devices in pediatric oncology patients

    International Nuclear Information System (INIS)

    Iqbal, Y.; Al-Katheri, A.; Al-Sedairy, R.; Al-Omari, A.; Abdullah, Mohammed F.; Crankson, S.

    2002-01-01

    Thrombolytic therapy with urokinase 5000 units has been the standard therapy for restoration of thrombosed central catheters. However, with the decreased availability of urokinase, alternatives needed to be sought. The aim of the study was to determine the efficacy, bioactivity, dwell time and cost of cryopreserved recombinant tissue plasminogen activator (rTPA) in the restoration of occluded central venous access devices. For children 10kg, a dose of 1 mg was used. The dwell time was 1-2 hours. Of the 40 courses of rTPA, 39 fully restored central venous line patency (97%). Successful courses were instilled for an average of 1 hour. Cryopreserved rTPA appears to be safe and effective in the dose used to restore the patency of occluded central venous access devices in pediatric oncology patients. (author)

  11. The Effect of the Elimination of Micromotion and Tissue Strain on Intracortical Device Performance

    Science.gov (United States)

    2016-10-01

    ultraviolet radiation . We have recently published an article (Ecker et al., 2016) detailing a study in which SMP materials were submitted to the...devices can tolerate sterilization. Established methods, accepted by the Food and Drug Administration, include steam, ethylene oxide (EtO), and

  12. Tissue

    Directory of Open Access Journals (Sweden)

    David Morrissey

    2012-01-01

    Full Text Available Purpose. In vivo gene therapy directed at tissues of mesenchymal origin could potentially augment healing. We aimed to assess the duration and magnitude of transene expression in vivo in mice and ex vivo in human tissues. Methods. Using bioluminescence imaging, plasmid and adenoviral vector-based transgene expression in murine quadriceps in vivo was examined. Temporal control was assessed using a doxycycline-inducible system. An ex vivo model was developed and optimised using murine tissue, and applied in ex vivo human tissue. Results. In vivo plasmid-based transgene expression did not silence in murine muscle, unlike in liver. Although maximum luciferase expression was higher in muscle with adenoviral delivery compared with plasmid, expression reduced over time. The inducible promoter cassette successfully regulated gene expression with maximum levels a factor of 11 greater than baseline. Expression was re-induced to a similar level on a temporal basis. Luciferase expression was readily detected ex vivo in human muscle and tendon. Conclusions. Plasmid constructs resulted in long-term in vivo gene expression in skeletal muscle, in a controllable fashion utilising an inducible promoter in combination with oral agents. Successful plasmid gene transfection in human ex vivo mesenchymal tissue was demonstrated for the first time.

  13. A novel specialized suture and inserting device for the resuspension of ptotic facial tissues: early results.

    Science.gov (United States)

    Bisaccia, Emil; Kadry, Razan; Saap, Liliana; Rogachefsky, Arlene; Scarborough, Dwight

    2009-04-01

    In the past decade, the popularity of minimally invasive procedures for facial rejuvenation has increased. To describe a new specialized suture, and its associated technique, used to elevate sagging tissues of the face and neck. A detailed description of the technique and the results obtained in 20 patients in whom we have used this novel approach. Attention was given to appropriate patient selection. The primary focus was on the correction of the jowl, jawline, and neck subunits. It involves the percutaneous introduction of a novel 3-0 polypropylene suture that has 10 absorbable hollow cones along its axis that are equally interspersed with knots. Once the absorbable cones are resorbed into the surrounding tissues, the non-absorbable suture component can be removed without compromising the aesthetic outcome. All patients demonstrated improvement in these areas, with minimal complications. One patient required resuspension using the open technique. (Excessive ptotic tissue was later excised for an optimal cosmetic result.) The suture and technique described in this article provide a major contribution to the correction of ptosis of facial tissues. When done in conjunction with other procedures, such as neck and jowl microliposuction, this technique has proven to be a useful addition to facial rejuvenation.

  14. Mandibular Bone and Soft Tissues Necrosis Caused by an Arsenical Endodontic Preparation Treated with Piezoelectric Device

    Directory of Open Access Journals (Sweden)

    A. Giudice

    2013-01-01

    Full Text Available This paper describes a case of wide mandibular bone necrosis associated with significant soft tissues injury after using an arsenical endodontic preparation in the right lower second molar for endodontic purpose. Authors debate about the hazardous effects of the arsenic paste and the usefulness of piezosurgery for treatment of this drug related bone necrosis.

  15. Real-time CARS imaging reveals a calpain-dependent pathway for paranodal myelin retraction during high-frequency stimulation.

    Directory of Open Access Journals (Sweden)

    Terry B Huff

    2011-03-01

    Full Text Available High-frequency electrical stimulation is becoming a promising therapy for neurological disorders, however the response of the central nervous system to stimulation remains poorly understood. The current work investigates the response of myelin to electrical stimulation by laser-scanning coherent anti-Stokes Raman scattering (CARS imaging of myelin in live spinal tissues in real time. Paranodal myelin retraction at the nodes of Ranvier was observed during 200 Hz electrical stimulation. Retraction was seen to begin minutes after the onset of stimulation and continue for up to 10 min after stimulation was ceased, but was found to reverse after a 2 h recovery period. The myelin retraction resulted in exposure of Kv 1.2 potassium channels visualized by immunofluorescence. Accordingly, treating the stimulated tissue with a potassium channel blocker, 4-aminopyridine, led to the appearance of a shoulder peak in the compound action potential curve. Label-free CARS imaging of myelin coupled with multiphoton fluorescence imaging of immuno-labeled proteins at the nodes of Ranvier revealed that high-frequency stimulation induced paranodal myelin retraction via pathologic calcium influx into axons, calpain activation, and cytoskeleton degradation through spectrin break-down.

  16. Endovascular Repair of Thoracoabdominal and Arch Aneurysms in Patients with Connective Tissue Disease Using Branched and Fenestrated Devices.

    Science.gov (United States)

    Clough, Rachel E; Martin-Gonzalez, Teresa; Van Calster, Katrien; Hertault, Adrien; Spear, Rafaëlle; Azzaoui, Richard; Sobocinski, Jonathan; Haulon, Stéphan

    2017-10-01

    Prophylactic open surgery is the standard practice in patients with connective tissue and thoracoabdominal aortic aneurysm (TAAA) and aortic arch disease. Branched and fenestrated devices offer a less invasive alternative but there are concerns regarding the durability of the repair and the effect of the stent graft on the fragile aortic wall. The aim of this study is to evaluate mid-term outcomes of fenestrated and/or branched endografting in patients with connective tissue disease. All patients with connective tissue disease who underwent TAAA or arch aneurysm repair using a fenestrated and/or branched endograft in a single, high-volume center between 2004 and 2015 were included. Ruptured aneurysms and acute aortic dissections were excluded from this study, but not chronic aortic dissections. In total, 427 (403 pararenal and TAAAs, and 24 arch aneurysms) endovascular interventions were performed during the study period. Of these, 17 patients (4%) (16 TAAAs, 1 arch) had connective tissue disease. All patients were classified as unfit for open repair. The mean age was 51 ± 8 years. Thirteen patients with TAAA were treated with a fenestrated, 1 with a branched, and 2 with a combined fenestrated/branch device. A double inner branch device was used to treat the arch aneurysm. The technical success rate was 100% with no incidence of early mortality, spinal cord ischemia, stroke, or further dissection. Postoperative deterioration in renal function was seen in 3 patients (18.8%) and no hemodialysis was required. The mean follow-up was 3.4 years (0.3-7.4). Aneurysm sac shrinkage was seen in 35% of patients (6/17) and the sac diameter remained stable in 65% of patients (11/17). No sac or sealing zone enlargement was observed in any of the patients and there were no conversions to open repair. Reintervention was required in 1 patient at 2 years for bilateral renal artery occlusion (successful fibrinolysis). One type II endoleak (lumbar) is under surveillance and 1 type

  17. Device for cutting protrusions

    Science.gov (United States)

    Bzorgi, Fariborz M [Knoxville, TN

    2011-07-05

    An apparatus for clipping a protrusion of material is provided. The protrusion may, for example, be a bolt head, a nut, a rivet, a weld bead, or a temporary assembly alignment tab protruding from a substrate surface of assembled components. The apparatus typically includes a cleaver having a cleaving edge and a cutting blade having a cutting edge. Generally, a mounting structure configured to confine the cleaver and the cutting blade and permit a range of relative movement between the cleaving edge and the cutting edge is provided. Also typically included is a power device coupled to the cutting blade. The power device is configured to move the cutting edge toward the cleaving edge. In some embodiments the power device is activated by a momentary switch. A retraction device is also generally provided, where the retraction device is configured to move the cutting edge away from the cleaving edge.

  18. Dynamic tissue phantoms and their use in assessment of a noninvasive optical plethysmography imaging device

    Science.gov (United States)

    Thatcher, Jeffrey E.; Plant, Kevin D.; King, Darlene R.; Block, Kenneth L.; Fan, Wensheng; DiMaio, J. Michael

    2014-05-01

    Non-contact photoplethysmography (PPG) has been studied as a method to provide low-cost and non-invasive medical imaging for a variety of near-surface pathologies and two dimensional blood oxygenation measurements. Dynamic tissue phantoms were developed to evaluate this technology in a laboratory setting. The purpose of these phantoms was to generate a tissue model with tunable parameters including: blood vessel volume change; pulse wave frequency; and optical scattering and absorption parameters. A non-contact PPG imaging system was evaluated on this model and compared against laser Doppler imaging (LDI) and a traditional pulse oximeter. Results indicate non-contact PPG accurately identifies pulse frequency and appears to identify signals from optically dense phantoms with significantly higher detection thresholds than LDI.

  19. Integration of soft tissue model and open haptic device for medical training simulator

    Science.gov (United States)

    Akasum, G. F.; Ramdhania, L. N.; Suprijanto; Widyotriatmo, A.

    2016-03-01

    Minimally Invasive Surgery (MIS) has been widely used to perform any surgical procedures nowadays. Currently, MIS has been applied in some cases in Indonesia. Needle insertion is one of simple MIS procedure that can be used for some purposes. Before the needle insertion technique used in the real situation, it essential to train this type of medical student skills. The research has developed an open platform of needle insertion simulator with haptic feedback that providing the medical student a realistic feel encountered during the actual procedures. There are three main steps in build the training simulator, which are configure hardware system, develop a program to create soft tissue model and the integration of hardware and software. For evaluating its performance, haptic simulator was tested by 24 volunteers on a scenario of soft tissue model. Each volunteer must insert the needle on simulator until rearch the target point with visual feedback that visualized on the monitor. From the result it can concluded that the soft tissue model can bring the sensation of touch through the perceived force feedback on haptic actuator by looking at the different force in accordance with different stiffness in each layer.

  20. [Treatment of eyelid retraction in Grave's disease by recession of the levator complex].

    Science.gov (United States)

    Fichter, N; Schittkowski, M; Guthoff, R F

    2004-11-01

    The chronic stage in Grave's orbitopathy is characterised by fibrotic changes within the orbital soft tissues, especially the extraocular muscles. Retraction of the eyelids is a common clinical feature of this phenomenon. To solve this problem several techniques for lengthening the upper eyelid have been described with variable rates of success. In this report we describe our modified Harvey's technique for the correction of upper eyelid retraction which includes a complete recession of the Muller's muscle/levator complex from the tarsal plate without the interposition of a spacer. Finally only the skin and the superficial orbicularis muscle are sutured. We also report about our results with this procedure. 8 patients (1 male, 7 female) with lid retraction in Grave's ophthalmopathy were recorded who had undergone the modified lengthening technique by an external approach between 2001 and 2004. Four patients underwent a bilateral procedure and 1 patient showed a significant under-correction, necessitating reoperation. So a total of 13 procedures were included in this follow-up study. Beside the common ophthalmological examination, special interest was put in the difference of the two eyelid apertures in primary position pre- and postoperatively. Within a follow-up period of at least 3 months we recorded an averaged lengthening of the upper eyelid of 3.1 mm. The difference of the two eyelid apertures in primary position improved from 2.2 mm preoperatively to 1.0 mm postoperatively. Only 1 patient needed reoperation because of a significant under-correction. There were no late over-corrections observed. The modified Harvey's technique to lengthen the upper eyelid is a safe and effective method to reduce upper eyelid retraction in Grave's disease. An eventually required orbital decompression or extraocular muscle surgery has to be done before the lid surgery.

  1. Evaluation of two intracavitary high-dose-rate brachytherapy devices for irradiating additional and irregularly shaped volumes of breast tissue

    International Nuclear Information System (INIS)

    Lu, Sharon M.; Scanderbeg, Daniel J.; Barna, Patrick; Yashar, William; Yashar, Catheryn

    2012-01-01

    The SAVI and Contura breast brachytherapy applicators represent 2 recent advancements in brachytherapy technology that have expanded the number of women eligible for accelerated partial breast irradiation in the treatment of early-stage breast cancer. Early clinical experience with these 2 single-entry, multichannel high-dose-rate brachytherapy devices confirms their ease of use and dosimetric versatility. However, current clinical guidelines for SAVI and Contura brachytherapy may result in a smaller or less optimal volume of treated tissue compared with traditional interstitial brachytherapy. This study evaluates the feasibility of using the SAVI and Contura to irradiate larger and irregularly shaped target volumes, approaching what is treatable with the interstitial technique. To investigate whether additional tissue can be treated, 17 patients treated with the SAVI and 3 with the Contura were selected. For each patient, the planning target volume (PTV) was modified to extend 1.1 cm, 1.3 cm, and 1.5 cm beyond the tumor bed cavity. To evaluate dose conformance to an irregularly shaped target volume, 9 patients treated with the SAVI and 3 with the Contura were selected from the original 20 patients. The following asymmetric PTV margin combinations were assessed for each patient: 1.5/0.3, 1.3/0.3, and 1.1/0.3 cm. For all patients, treatment planning was performed, adopting the National Surgical Adjuvant Breast and Bowel Project guidelines, and dosimetric comparisons were made. The 6–1 and 8–1 SAVI devices can theoretically treat a maximal tissue margin of 1.5 cm and an asymmetric PTV with margins ranging from 0.3 to 1.5 cm. The 10–1 SAVI and Contura can treat a maximal margin of 1.3 cm and 1.1 cm, respectively, and asymmetric PTV with margins ranging from 0.3–1.3 cm. Compared with the Contura, the SAVI demonstrated greater dosimetric flexibility. Risk of developing excessive hot spots increased with the size of the SAVI device. Both the SAVI and Contura

  2. Retraction: Redundant Publication of the article Dental caries and ...

    African Journals Online (AJOL)

    Retraction: Redundant Publication of the article Dental caries and oral health practices among 12 year old children in Nairobi West and Mathira West Districts, Kenya. Gladwell Gathecha et al. The Pan African Medical Journal. 2012;12:42.

  3. The CritiView: a new fiber optic based optical device for the assessment of tissue vitality

    Science.gov (United States)

    Mayevsky, Avraham; Blum, Yoram; Dekel, Nava; Deutsch, Assaf; Halfon, Rafael; Kremer, Shlomi; Pewzner, Eliyahu; Sherman, Efrat; Barnea, Ofer

    2006-02-01

    The most important parameter that reflects the balance between oxygen supply and demand in tissues is the mitochondrial NADH redox state that could be monitored In vivo. Nevertheless single parameter monitoring is limited in the interpretation capacity of the very complicated pathophysiological events, therefore three more parameters were added to the NADH and the multiparametric monitoring system was used in experimental and clinical studies. In our previous paper1 we described the CritiView (CRV1) including a fiber optic probe that monitor four physiological parameters in real time. In the new model (CRV3) several factors such as UV safety, size and price of the device were improved significantly. The CRV3 enable to monitor the various parameters in three different locations in the tissue thus increasing the reliability of the data due to the better statistics. The connection between the device and the monitored tissue could be done by various types of probes. The main probe that was tested also in clinical studies was a special 3 points probe that includes 9 optical fibers (3 in each point) that was embedded in a three way Foley catheter. This catheter enabled the monitoring of urethral wall vitality as an indicator of the development of body metabolic emergency state. The three point probe was tested in the brain exposed to the lack of oxygen (Anoxia, Hypoxia or Ischemia). A decrease in blood oxygenation and a large increase in mitochondrial NADH fluorescence were recorded. The microcirculatory blood flow increased during anoxia and hypoxia and decreased significantly under ischemia.

  4. The success rate of TED upper eyelid retraction reoperations.

    Science.gov (United States)

    Golan, Shani; Rootman, Dan B; Goldberg, Robert A

    2016-12-01

    Although reoperation rates for upper lid retraction surgery for thyroid eye disease (TED) typically range between 8% and 23%, there is little literature describing the outcomes of these second operations. In this retrospective observational cohort study, all patients that underwent surgery for upper eyelid retraction over a 14-year period at a single institution were included. Cases were included if a second eyelid retraction surgery was performed during the study period. Success of surgery was defined as a marginal reflex distance (MRD1) of 2.5 to 4.5 mm in each eye and less than 1 mm difference in MRD1 between the eyes. Overcorrection and undercorrection were defined as above and below these bounds, respectively. 72 eyes in 49 patients were included in the study. The mean age was 56.6 (±11.5) years. By definition, all patients had at least 1 lid lengthening surgery for upper eyelid retraction, and at least 1 subsequent surgery. For this second surgery, 61 eyes (85%) underwent retraction surgery and 11 eyes (15%) underwent ptosis surgery. After this second operation, 31% were undercorrected and 33% were overcorrected. A third surgery was performed in 19 eyes (25%), 12 had surgery for residual retraction and 7 for ptosis. After the third operation 10% of eyes were under corrected and 11% were over corrected. Four patients underwent a fourth surgery: one for retraction and three for ptosis. Success was noted in 35% after the second surgery and 44% after the third. Surgical success in eyelid retraction surgery increases from a second to a third consecutive surgery, and residual asymmetry was roughly equally distributed between over- and undercorrection.

  5. Device for lengthening of a musculotendinous unit by direct continuous traction in the sheep

    Directory of Open Access Journals (Sweden)

    Zumstein Matthias A

    2012-05-01

    Full Text Available Abstract Background Retraction, atrophy and fatty infiltration are signs subsequent to chronic rotator cuff tendon tears. They are associated with an increased pennation angle and a shortening of the muscle fibers in series. These deleterious changes of the muscular architecture are not reversible with current repair techniques and are the main factors for failed rotator cuff tendon repair. Whereas fast stretching of the retracted musculotendinous unit results in proliferation of non-contractile fibrous tissue, slow stretching may lead to muscle regeneration in terms of sarcomerogenesis. To slowly stretch the retracted musculotendinous unit in a sheep model, two here described tensioning devices have been developed and mounted on the scapular spine of the sheep using an expandable threaded rod, which has been interposed between the retracted tendon end and the original insertion site at the humeral head. Traction is transmitted in line with the musculotendinous unit by sutures knotted on the expandable threaded rod. The threaded rod of the tensioner is driven within the body through a rotating axis, which enters the body on the opposite side. The tendon end, which was previously released (16 weeks prior from its insertion site with a bone chip, was elongated with a velocity of 1 mm/day. Results After several steps of technical improvements, the tensioner proved to be capable of actively stretching the retracted and degenerated muscle back to the original length and to withstand the external forces acting on it. Conclusion This technical report describes the experimental technique for continuous elongation of the musculotendinous unit and reversion of the length of chronically shortened muscle.

  6. Efficiency of piezosurgery technique in miniscrew supported en-masse retraction: a single-centre, randomized controlled trial.

    Science.gov (United States)

    Tunçer, Nilüfer Irem; Arman-Özçirpici, Ayça; Oduncuoglu, Bahar Füsun; Göçmen, Jülide Sedef; Kantarci, Alpdogan

    2017-11-30

    Piezoelectric surgery is a newly introduced technique for rapid tooth movement. However, the efficiency of this technique has not been investigated on en-masse retraction cases yet. To investigate the efficiency of piezosurgery technique in accelerating miniscrew supported en-masse retraction and study the biological tissue response. In addition, to show if this technique induces a difference in dental, skeletal and soft tissue changes on lateral cephalograms, and in canine and molar rotations, besides intercanine and intermolar widths on dental casts. We conducted a randomized, single-centred, parallel-group, controlled trial, requiring upper right and left first premolar extractions on 30 patients above the minimum age of 14 years at the beginning of retraction. Piezosurgery-assisted versus conventional en-masse retraction anchored from miniscrews placed between second premolars and first molars, bilaterally. The main outcome was the en-masse retraction rate. Secondary outcomes were gingival crevicular fluid (GCF) volume and GCF content of receptor activator of nuclear factor κβ ligand (RANKL), changes regarding cephalometric and dental cast variables, and miniscrew success rates. Accomplished with opaque, sealed envelopes. Applicable for data assessment only. Commenced in February 2013 and ended in October 2014. Thirty-one patients were included in the study and divided into 2 groups of piezosurgery (n = 16) and control (n = 15). After 9.3 months of follow-up, no statistically significant difference was observed between groups for neither retraction rates (P = 0.958) nor GCF parameters (P > 0.05). Changes in lateral cephalometric and dental cast variables, and miniscrew success rates did not show significant differences either. Based on the results of this study, piezosurgery technique was found to be ineffective in accelerating en-masse retraction, and promoting a difference in the studied GCF parameters, skeletal and dental variables. The trial was not

  7. 3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances

    Directory of Open Access Journals (Sweden)

    Soroosh Derakhshanfar

    2018-06-01

    Full Text Available 3D printing, an additive manufacturing based technology for precise 3D construction, is currently widely employed to enhance applicability and function of cell laden scaffolds. Research on novel compatible biomaterials for bioprinting exhibiting fast crosslinking properties is an essential prerequisite toward advancing 3D printing applications in tissue engineering. Printability to improve fabrication process and cell encapsulation are two of the main factors to be considered in development of 3D bioprinting. Other important factors include but are not limited to printing fidelity, stability, crosslinking time, biocompatibility, cell encapsulation and proliferation, shear-thinning properties, and mechanical properties such as mechanical strength and elasticity. In this review, we recite recent promising advances in bioink development as well as bioprinting methods. Also, an effort has been made to include studies with diverse types of crosslinking methods such as photo, chemical and ultraviolet (UV. We also propose the challenges and future outlook of 3D bioprinting application in medical sciences and discuss the high performance bioinks.

  8. Retraction of articles by Dr M. Aramli.

    Science.gov (United States)

    2018-06-01

    The below articles published online on Wiley Online Library (wileyonlinelibrary.com) have been retracted by agreement between the submitting author, Mohammad Sadegh Aramli, the Editor-in-Chief, Heriberto Rodriguez-Martinez, and Blackwell Verlag GmbH. After a thorough investigation, there is strong evidence to indicate that the peer review of these papers was compromised. The identities of the reviewers were unable to be verified, and it is believed that these papers were accepted based on recommendations from reviewers not suitably qualified. REFERENCES Aramli, M. (2014). ATP content, oxidative stress and motility of beluga (Huso huso) semen: Effect of short-term storage. Reproduction in Domestic Animals, 49, 636-640. https://doi.org/10.1111/rda.12339 Aramli, M., Nazari, R., & Gharibi, M. (2015), Effect of post-thaw storage time on motility and fertility of cryopreserved beluga sturgeon (Huso huso) sperm. Reproduction in Domestic Animals, 50, 349-352. https://doi.org/10.1111/rda.12484 Aramli, M., Golshahi, K., Nazari, R., Golpour, A., & Aramli, S. (2016). Influence of glutamine supplementation on motility and fertilization success of frozen-thawed persian sturgeon (Acipenser persicus) sperm. Reproduction in Domestic Animals, 51, 474-477. https://doi.org/10.1111/rda.12704 Aramli, M., Golshahi, K., Banan, A., & Sotoudeh, E. (2016). Reliable collection of Caspian brown trout (Salmo trutta caspius) sperm using a catheter. Reproduction in Domestic Animals, 51, 831-834. https://doi.org/10.1111/rda.12740 Aramli, M., Nazari, R., Aramli, S., & Nouri, H. (2017). Motility and oxidative-antioxidant capacity of Huso huso semen, stored at -80°C. Reproduction in Domestic Animals, 52, 170-173. https://doi.org/10.1111/rda.12814. © 2018 Blackwell Verlag GmbH.

  9. Large-scale automated image analysis for computational profiling of brain tissue surrounding implanted neuroprosthetic devices using Python.

    Science.gov (United States)

    Rey-Villamizar, Nicolas; Somasundar, Vinay; Megjhani, Murad; Xu, Yan; Lu, Yanbin; Padmanabhan, Raghav; Trett, Kristen; Shain, William; Roysam, Badri

    2014-01-01

    In this article, we describe the use of Python for large-scale automated server-based bio-image analysis in FARSIGHT, a free and open-source toolkit of image analysis methods for quantitative studies of complex and dynamic tissue microenvironments imaged by modern optical microscopes, including confocal, multi-spectral, multi-photon, and time-lapse systems. The core FARSIGHT modules for image segmentation, feature extraction, tracking, and machine learning are written in C++, leveraging widely used libraries including ITK, VTK, Boost, and Qt. For solving complex image analysis tasks, these modules must be combined into scripts using Python. As a concrete example, we consider the problem of analyzing 3-D multi-spectral images of brain tissue surrounding implanted neuroprosthetic devices, acquired using high-throughput multi-spectral spinning disk step-and-repeat confocal microscopy. The resulting images typically contain 5 fluorescent channels. Each channel consists of 6000 × 10,000 × 500 voxels with 16 bits/voxel, implying image sizes exceeding 250 GB. These images must be mosaicked, pre-processed to overcome imaging artifacts, and segmented to enable cellular-scale feature extraction. The features are used to identify cell types, and perform large-scale analysis for identifying spatial distributions of specific cell types relative to the device. Python was used to build a server-based script (Dell 910 PowerEdge servers with 4 sockets/server with 10 cores each, 2 threads per core and 1TB of RAM running on Red Hat Enterprise Linux linked to a RAID 5 SAN) capable of routinely handling image datasets at this scale and performing all these processing steps in a collaborative multi-user multi-platform environment. Our Python script enables efficient data storage and movement between computers and storage servers, logs all the processing steps, and performs full multi-threaded execution of all codes, including open and closed-source third party libraries.

  10. Large-scale automated image analysis for computational profiling of brain tissue surrounding implanted neuroprosthetic devices using Python

    Directory of Open Access Journals (Sweden)

    Nicolas eRey-Villamizar

    2014-04-01

    Full Text Available In this article, we describe use of Python for large-scale automated server-based bio-image analysis in FARSIGHT, a free and open-source toolkit of image analysis methods for quantitative studies of complex and dynamic tissue microenvironments imaged by modern optical microscopes including confocal, multi-spectral, multi-photon, and time-lapse systems. The core FARSIGHT modules for image segmentation, feature extraction, tracking, and machine learning are written in C++, leveraging widely used libraries including ITK, VTK, Boost, and Qt. For solving complex image analysis task, these modules must be combined into scripts using Python. As a concrete example, we consider the problem of analyzing 3-D multi-spectral brain tissue images surrounding implanted neuroprosthetic devices, acquired using high-throughput multi-spectral spinning disk step-and-repeat confocal microscopy. The resulting images typically contain 5 fluorescent channels, 6,000$times$10,000$times$500 voxels with 16 bits/voxel, implying image sizes exceeding 250GB. These images must be mosaicked, pre-processed to overcome imaging artifacts, and segmented to enable cellular-scale feature extraction. The features are used to identify cell types, and perform large-scale analytics for identifying spatial distributions of specific cell types relative to the device. Python was used to build a server-based script (Dell 910 PowerEdge servers with 4 sockets/server with 10 cores each, 2 threads per core and 1TB of RAM running on Red Hat Enterprise Linux linked to a RAID 5 SAN capable of routinely handling image datasets at this scale and performing all these processing steps in a collaborative multi-user multi-platform environment consisting. Our Python script enables efficient data storage and movement between compute and storage servers, logging all processing steps, and performs full multi-threaded execution of all codes, including open and closed-source third party libraries.

  11. Numerical stress analysis of the iris tissue induced by pupil expansion: Comparison of commercial devices

    Science.gov (United States)

    Wang, Xiaofei; Perera, Shamira A.; Girard, Michaël J. A.

    2018-01-01

    Purpose (1) To use finite element (FE) modelling to estimate local iris stresses (i.e. internal forces) as a result of mechanical pupil expansion; and to (2) compare such stresses as generated from several commercially available expanders (Iris hooks, APX dilator and Malyugin ring) to determine which design and deployment method are most likely to cause iris damage. Methods We used a biofidelic 3-part iris FE model that consisted of the stroma, sphincter and dilator muscles. Our FE model simulated expansion of the pupil from 3 mm to a maximum of 6 mm using the aforementioned pupil expanders, with uniform circular expansion used for baseline comparison. FE-derived stresses, resultant forces and area of final pupil opening were compared across devices for analysis. Results Our FE models demonstrated that the APX dilator generated the highest stresses on the sphincter muscles, (max: 6.446 MPa; average: 5.112 MPa), followed by the iris hooks (max: 5.680 MPa; average: 5.219 MPa), and the Malyugin ring (max: 2.144 MPa; average: 1.575 MPa). Uniform expansion generated the lowest stresses (max: 0.435MPa; average: 0.377 MPa). For pupil expansion, the APX dilator required the highest force (41.22 mN), followed by iris hooks (40.82 mN) and the Malyugin ring (18.56 mN). Conclusion Our study predicted that current pupil expanders exert significantly higher amount of stresses and forces than required during pupil expansion. Our work may serve as a guide for the development and design of next-generation pupil expanders. PMID:29538452

  12. Treatment of near-skull brain tissue with a focused device using shear-mode conversion: a numerical study

    International Nuclear Information System (INIS)

    Pichardo, Samuel; Hynynen, Kullervo

    2007-01-01

    Shear mode transmission through the skull has been previously proposed as a new trans-skull propagation technique for noninvasive therapeutic ultrasound (Clement 2004 J. Acoust. Soc. Am. 115 1356-64). The main advantage of choosing shear over longitudinal mode resides on the fact that there is less wavefront distortion with the former. In the present study, the regions of the brain suitable for shear-mode transmission were established for a simple focused ultrasound device. The device consists of a spherically curved transducer that has a focal length of 10 cm, an aperture between 30 0 and 60 0 and operates at 0.74 MHz. The regions suitable for shear-mode transmission were determined by the shear wave acoustic windows that matched the shape of the device acoustic field. The acoustic windows were calculated using segmentation and triangulation of outer and inner faces of skull from 3D-MRI head datasets. Nine heads of healthy adults were analyzed. The surface considered for the calculations was the head region found above the supra-orbital margin. For every inspected point in the brain volume, the axis of the device was determined by the vector between this inspection point and a point located in the center of the brain. Numerical predictions of the acoustic field, where shear-mode conversion through the skull was considered, were obtained and compared to the case of water-only conditions. The brain tissue that is close to the skull showed suitable acoustic windows for shear waves. The central region of the brain seems to be unreachable using shear-mode. Analysis of the acoustic fields showed a proportional relation between the acoustic window for shear mode and the effective degree of focusing. However, this relation showed significant differences among specimens. In general, highly focused fields were obtained when the acoustic window for shear waves (A SW ) intersected more than 67% of the entering acoustic window (A TX ) of the device. The average depth from the

  13. Typology of Retractable Roof Structures in Stadiums and Sports Halls

    Directory of Open Access Journals (Sweden)

    Andrej Mahovič

    2015-10-01

    Full Text Available Retractable roof structures are one of the four fundamental systems (in addition to the playing area, stands and facade in a stadium and sports hall. The roof protects users against various weather conditions and creates optimum circumstances for carrying out different activities. Stadiums and sports halls with retractable roof structures can host a greater variety of activities, improve the quality of their implementation and the quality of visitors’ experience, and affect the perception and experience of people using or observing such buildings. A retractable roof structure allows for natural lighting and ventilation of the venue, gives optimal conditions for grass growth on the playing field, and reduces costs of use and maintenance of the building. Different typologies of movement of roof structures (frequency of opening and closing, design of the structure, and methods of movement are categorised in terms of their architectural and structural design. Application of different retractable roof systems worldwide is indicator of their effectiveness and efficiency, and is basis for use of movement also in other fundamental systems of stadiums and sports halls. Research and identification of characteristics of retractable roof structures lead to the design of new moving systems that can with the application of the moving principle change the purpose of movable elements or assume the characteristics of other fundamental systems.

  14. Medialized repair for retracted rotator cuff tears.

    Science.gov (United States)

    Kim, Young-Kyu; Jung, Kyu-Hak; Won, Jun-Sung; Cho, Seung-Hyun

    2017-08-01

    The purpose of this study was to evaluate the functional outcomes of medialized rotator cuff repair and the continuity of repaired tendon in chronic retracted rotator cuff tears. Thirty-five consecutive patients were selected from 153 cases that underwent arthroscopic rotator cuff repair for more than medium-sized posterosuperior rotator cuff tears between July 2009 and July 2012 performed with the medialized repair. All cases were available for at least 2 years of postoperative follow-up. The visual analog scale of pain, muscle strength, Constant score, American Shoulder and Elbow Surgeons (ASES) score, and University of California-Los Angeles score were evaluated. At the final follow-up, all clinical outcomes were significantly improved. The visual analog scale score for pain improved from 6 ± 1 preoperatively to 2 ± 1 postoperatively. The range of motion increased from preoperatively to postoperatively: active forward elevation, from 134° ± 49° to 150° ± 16°; active external rotation at the side, from 47° ± 15° to 55° ± 10°; and active internal rotation, from L3 to L1. The shoulder score also improved: Constant score, from 53.5 ± 16.7 to 79 ± 10; American Shoulder and Elbow Surgeons score, from 51 ± 15 to 82 ± 8; and University of California-Los Angeles score, from 14 ± 4 to 28 ± 4. The retear cases at the final follow-up were 6 (17%). Medialized repair may be useful in cases in which anatomic bone-to-tendon repair would be difficult because of the excessive tension of the repaired tendon and a torn tendon that does not reach the anatomic insertion. Copyright © 2016 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

  15. Exploring the characteristics, global distribution and reasons for retraction of published articles involving human research participants: a literature survey.

    Science.gov (United States)

    Li, Guowei; Kamel, Mariam; Jin, Yanling; Xu, Michael Kuan; Mbuagbaw, Lawrence; Samaan, Zainab; Levine, Mitchell Ah; Thabane, Lehana

    2018-01-01

    Article retraction is a measure taken by journals or authors where there is evidence of research misconduct or error, redundancy, plagiarism or unethical research. Recently, the retraction of scientific publications has been on the rise. In this survey, we aimed to describe the characteristics and distribution of retracted articles and the reasons for retractions. We searched retracted articles on the PubMed database and Retraction Watch website from 1980 to February 2016. The primary outcomes were the characteristics and distribution of retracted articles and the reasons for retractions. The secondary outcomes included how article retractions were handled by journals and how to improve the journal practices toward article retractions. We included 1,339 retracted articles. Most retracted articles had six authors or fewer. Article retraction was most common in the USA (26%), Japan (11%) and Germany (10%). The main reasons for article retraction were misconduct (51%, n = 685) and error (14%, n = 193). There were 66% (n = 889) of retracted articles having male senior or corresponding authors. Of the articles retracted after August 2010, 63% (n = 567) retractions were reported on Retraction Watch. Large discrepancies were observed in the ways that different journals handled article retractions. For instance, articles were completely withdrawn from some journals, while in others, articles were still available with no indication of retraction. Likewise, some retraction notices included a detailed account of the events that led to article retraction, while others only consisted of a statement indicating the article retraction. The characteristics, geographic distribution and reasons for retraction of published articles involving human research participants were examined in this survey. More efforts are needed to improve the consistency and transparency of journal practices toward article retractions.

  16. Is Duane retraction syndrome part of the VACTERL association?

    Directory of Open Access Journals (Sweden)

    Akar S

    2013-03-01

    Full Text Available Serpil Akar,1 Birsen Gokyigit,1 Isilay Kavadarli,2 Ahmet Demirok11Pediatric Ophthalmology and Strabismus Department, Prof Dr N Resat Belger Beyoglu Education and Research Eye Hospital, Istanbul, 2Department of Ophthalmology, Gaziantep, Kilis State Hospital, Kilis, TurkeyAbstract: We report here a patient with type 1 Duane’s retraction syndrome and multiple congenital abnormalities as a result of the VACTERL association. The presented combination of Duane’s retraction syndrome and the VACTERL association has not been reported in the literature. The present case was instructive for reviewing the continuous spectrum of ocular anomalies that accompany the VACTERL association.Keywords: Duane’s retraction syndrome, VACTERL association, combination

  17. The effects of electromagnetic radiation (2450 MHz wireless devices) on the heart and blood tissue: role of melatonin.

    Science.gov (United States)

    Gumral, N; Saygin, M; Asci, H; Uguz, A C; Celik, O; Doguc, D K; Savas, H B; Comlekci, S

    2016-01-01

    This study was designed to investigate the effects of 2450 MHz EMR on the heart and blood in rat and possible ameliorating effects of melatonin. Thirty-two female Wistar Albino rats were randomly grouped (by eight in each group) as follows:  Group I: cage-control group (dimethysulfoxide (DMSO), 10mg/kg/day i.p. without stress and EMR. Group II: sham-control rats stayed in restrainer without EMR and DMSO (10mg/kg/day i.p.). Group III: rats exposed to 2450 MHz EMR. Group IV: treated group rats exposed to 2450 MHz EMR+melatonin (MLT) (10mg/kg/day i.p.). In the blood tissue, there was no significant difference between the groups in respect of erythrocytes GSH, GSH-Px activity, plasma LP level and vitamin A concentration (p > 0.05). However, in the Group IV, erythrocytes' LP levels (p < 0.05) were observed to be significantly decreased while plasma vitamin C, and vitamin E concentrations (p < 0.05) were found to be increased when compared to Group III. In the heart tissues, MDA and NO levels significantly increased in group III compared with groups I and II (p < 0.05). Contrary to these oxidant levels, CAT and SOD enzyme activities decreased significantly in group III compared with groups I and II (p 0.05). Besides, MLT treatment lowered the MDA and NO levels compared with group III. In conclusion, these results demonstrated that contrary to its effect on the heart, the wireless (2450 MHz) devices cause slight oxidative-antioxidative changes in the blood of rats, and a moderate melatonin supplementation may play an important role in the antioxidant system (plasma vitamin C and vitamin E). However, further investigations are required to clarify the mechanism of action of the applied 2450 MHz EMR exposure (Tab. 3, Fig. 1, Ref. 49).

  18. Surgical membranes as directional delivery devices to generate tissue: testing in an ovine critical sized defect model.

    Directory of Open Access Journals (Sweden)

    Melissa L Knothe Tate

    Full Text Available Pluripotent cells residing in the periosteum, a bi-layered membrane enveloping all bones, exhibit a remarkable regenerative capacity to fill in critical sized defects of the ovine femur within two weeks of treatment. Harnessing the regenerative power of the periosteum appears to be limited only by the amount of healthy periosteum available. Here we use a substitute periosteum, a delivery device cum implant, to test the hypothesis that directional delivery of endogenous periosteal factors enhances bone defect healing.Newly adapted surgical protocols were used to create critical sized, middiaphyseal femur defects in four groups of five skeletally mature Swiss alpine sheep. Each group was treated using a periosteum substitute for the controlled addition of periosteal factors including the presence of collagen in the periosteum (Group 1, periosteum derived cells (Group 2, and autogenic periosteal strips (Group 3. Control group animals were treated with an isotropic elastomer membrane alone. We hypothesized that periosteal substitute membranes incorporating the most periosteal factors would show superior defect infilling compared to substitute membranes integrating fewer factors (i.e. Group 3>Group 2>Group 1>Control.Based on micro-computed tomography data, bone defects enveloped by substitute periosteum enabling directional delivery of periosteal factors exhibit superior bony bridging compared to those sheathed with isotropic membrane controls (Group 3>Group 2>Group 1, Control. Quantitative histological analysis shows significantly increased de novo tissue generation with delivery of periosteal factors, compared to the substitute periosteum containing a collagen membrane alone (Group 1 as well as compared to the isotropic control membrane. Greatest tissue generation and maximal defect bridging was observed when autologous periosteal transplant strips were included in the periosteum substitute.Periosteum-derived cells as well as other factors

  19. What time-lag for a retraction search on PubMed?

    Science.gov (United States)

    Decullier, Evelyne; Huot, Laure; Maisonneuve, Hervé

    2014-06-25

    To investigate fraud and errors, scientists have studied cohorts of retraction notices. These researches have been performed using a PubMed search on publication type "retraction of publication" which retrieves the notices of the retractions. We assessed the stability of the indexation of retraction notices over a 15-month period and what was the time-lag to get stability. A search on notices of retraction issued in 2008 was repeated every 3 months during 15 months from February 2011. The first search resulted in 237 notices of retraction. Throughout the study period, 14 discrepancies with the initial search were observed (6%). We found that the number of retraction notices became stable 35 months after the retraction. The time-lag observed in this study has to be taken into account when performing a PubMed search.

  20. Plagiarism Allegations Account for Most Retractions in Major Latin American/Caribbean Databases.

    Science.gov (United States)

    Almeida, Renan Moritz V R; de Albuquerque Rocha, Karina; Catelani, Fernanda; Fontes-Pereira, Aldo José; Vasconcelos, Sonia M R

    2016-10-01

    This study focuses on retraction notices from two major Latin American/Caribbean indexing databases: SciELO and LILACS. SciELO includes open scientific journals published mostly in Latin America/the Caribbean, from which 10 % are also indexed by Thomson Reuters Web of Knowledge Journal of Citation Reports (JCR). LILACS has a similar geographical coverage and includes dissertations and conference/symposia proceedings, but it is limited to publications in the health sciences. A search for retraction notices was performed in these two databases using the keywords "retracted", "retraction" "withdrawal", "withdrawn", "removed" and "redress". Documents were manually checked to identify those that actually referred to retractions, which were then analyzed and categorized according to the reasons alleged in the notices. Dates of publication/retraction and time to retraction were also recorded. Searching procedures were performed between June and December 2014. Thirty-one retraction notices were identified, fifteen of which were in JCR-indexed journals. "Plagiarism" was alleged in six retractions of this group. Among the non-JCR journals, retraction reasons were alleged in fourteen cases, twelve of which were attributed to "plagiarism". The proportion of retracted articles for the SciELO database was approximately 0.005 %. The reasons alleged in retraction notices may be used as signposts to inform discussions in Latin America on plagiarism and research integrity. At the international level, these results suggest that the correction of the literature is becoming global and is not limited to mainstream international publications.

  1. Folding-retraction of chaotic dynamical manifold and the VAK of vacuum fluctuation

    International Nuclear Information System (INIS)

    El-Ghoul, M.; El-Ahmady, A.E.; Rafat, H.

    2004-01-01

    In this paper we introduce the retraction of chaos dynamical manifold. Some properties of chaos dynamical manifold will be deduced. Theorems governing the relation between the folding and retraction of chaos dynamical manifold will be discussed. Some applications of chaos dynamical manifolds and their retractions are achieved in particular high energy particle physics

  2. Duane retraction syndrome type 1 with Usher syndrome type 2: an unreported association.

    Science.gov (United States)

    Khurana, Bhawna Piplani; Khurana, Aruj Kumar; Grover, Sumit

    2015-05-07

    Duane retraction syndrome is characterized by globe retraction and palpebral fissure narrowing on adduction, with restriction of abduction, adduction, or both. Usher syndrome type 2 consists of congenital bilateral sensorineural hearing loss and retinitis pigmentosa. The authors present a case with a yet unreported association between Duane retraction syndrome type 1 and Usher syndrome type 2. Copyright 2015, SLACK Incorporated.

  3. Composition, Enzymes Analysis and Retraction Time of Columellar ...

    African Journals Online (AJOL)

    With the aid of columellar muscle, snails retract the soft part into the shell when disturbed. The response time of three Giant African Land Snail (GALS) species: Archachatina marginata, Achatina achatina and Achatina fulica to touch and sodium chloride (NaCl) solution was examined. Chemical composition (protein, glucose ...

  4. Surge in Journal Retractions May Mask Decline in Actual Problems

    Science.gov (United States)

    Basken, Paul

    2012-01-01

    Scientific journals have been retracting unreliable articles at rapidly escalating rates in the past few years, raising concern about whether research faces a burgeoning ethical crisis. Various causes have been suspected, with the common theme being that journals are seeing more cases of plagiarism and fudging of data as researchers and editors…

  5. Promoting Ethics and Integrity in Management Academic Research: Retraction Initiative.

    Science.gov (United States)

    Ayodele, Freida Ozavize; Yao, Liu; Haron, Hasnah

    2018-02-13

    In the management academic research, academic advancement, job security, and the securing of research funds at one's university are judged mainly by one's output of publications in high impact journals. With bogus resumes filled with published journal articles, universities and other allied institutions are keen to recruit or sustain the appointment of such academics. This often places undue pressure on aspiring academics and on those already recruited to engage in research misconduct which often leads to research integrity. This structured review focuses on the ethics and integrity of management research through an analysis of retracted articles published from 2005 to 2016. The study employs a structured literature review methodology whereby retracted articles published between 2005 and 2016 in the field of management science were found using Crossref and Google Scholar. The searched articles were then streamlined by selecting articles based on their relevance and content in accordance with the inclusion criteria. Based on the analysed retracted articles, the study shows evidence of ethical misconduct among researchers of management science. Such misconduct includes data falsification, the duplication of submitted articles, plagiarism, data irregularity and incomplete citation practices. Interestingly, the analysed results indicate that the field of knowledge management includes the highest number of retracted articles, with plagiarism constituting the most significant ethical issue. Furthermore, the findings of this study show that ethical misconduct is not restricted to a particular geographic location; it occurs in numerous countries. In turn, avenues of further study on research misconduct in management research are proposed.

  6. Ergodic Retractions for Families of Asymptotically Nonexpansive Mappings

    Directory of Open Access Journals (Sweden)

    Saeidi Shahram

    2010-01-01

    Full Text Available We prove some theorems for the existence of ergodic retractions onto the set of common fixed points of a family of asymptotically nonexpansive mappings. Our results extend corresponding results of Benavides and Ramírez (2001, and Li and Sims (2002.

  7. Alkaline phosphatase activity in gingival crevicular fluid during canine retraction.

    Science.gov (United States)

    Batra, P; Kharbanda, Op; Duggal, R; Singh, N; Parkash, H

    2006-02-01

    The aim of the study was to investigate alkaline phosphatase activity in the gingival crevicular fluid (GCF) during orthodontic tooth movement in humans. Postgraduate orthodontic clinic. Ten female patients requiring all first premolar extractions were selected and treated with standard edgewise mechanotherapy. Canine retraction was done using 100 g sentalloy springs. Maxillary canine on one side acted as experimental site while the contralateral canine acted as control. Gingival crevicular fluid was collected from mesial and distal of canines before initiation of canine retraction (baseline), immediately after initiation of retraction, and on 1st, 7th, 14th and 21st day and the alkaline phosphatase activity was estimated. The results show significant (p < 0.05) changes in alkaline phosphatase activity on the 7th, 14th and 21st day on both mesial and distal aspects of the compared experimental and control sides. The peak in enzyme activity occurred on the 14th day of initiation of retraction followed by a significant fall in activity especially on the mesial aspect. The study showed that alkaline phosphatase activity could be successfully estimated in the GCF using calorimetric estimation assay kits. The enzyme activity showed variation according to the amount of tooth movement.

  8. Retractable Pin Tools for the Friction Stir Welding Process

    Science.gov (United States)

    1998-01-01

    Two companies have successfully commercialized a specialized welding tool developed at the Marshall Space Flight Center (MSFC). Friction stir welding uses the high rotational speed of a tool and the resulting frictional heat created from contact to crush, 'stir' together, and forge a bond between two metal alloys. It has had a major drawback, reliance on a single-piece pin tool. The pin is slowly plunged into the joint between two materials to be welded and rotated as high speed. At the end of the weld, the single-piece pin tool is retracted and leaves a 'keyhole,' something which is unacceptable when welding cylindrical objects such as drums, pipes and storage tanks. Another drawback is the requirement for different-length pin tools when welding materials of varying thickness. An engineer at the MSFC helped design an automatic retractable pin tool that uses a computer-controlled motor to automatically retract the pin into the shoulder of the tool at the end of the weld, preventing keyholes. This design allows the pin angle and length to be adjusted for changes in material thickness and results in a smooth hole closure at the end of the weld. Benefits of friction stir welding, using the MSFC retractable pin tool technology, include the following: The ability to weld a wide range of alloys, including previously unweldable and composite materials; provision of twice the fatigue resistance of fusion welds and no keyholes; minimization of material distortion; no creation of hazards such as welding fumes, radiation, high voltage, liquid metals, or arcing; automatic retraction of the pin at the end of the weld; and maintaining full penetration of the pin.

  9. Skeletal and soft tissue changes and stability in cleft lip and palate patients after distraction osteogenesis using a new intraoral maxillary device.

    Science.gov (United States)

    Ansari, Edward; Tomat, Catherine; Kadlub, Natacha; Diner, Patrick A; Bellocq, Thomas; Vazquez, Marie-Paule; Picard, Arnaud

    2015-04-01

    The authors have recently reported on the use of an internal maxillary distraction device. In this study, we report on the hard and soft tissue movements achieved with this intraoral distraction device, and the stability changes after distraction osteogenesis for maxillary hypoplasia in patients with cleft lip and palate. Ten male patients with severe hypoplasia of the maxilla, with complete uni- or bilateral cleft lip and palate were included. The mean age of the patients at the time of operation was 11.91 years (±3.41). To evaluate the distraction process and stability, superimpositions on the preoperative lateral cephalograms were performed. The mean follow-up (FU) was 15.42 months (±3.94). Cephalometric measurements at all of the maxillary hard and soft tissue points improved significantly. Maxillary point A was advanced by 8.25 mm (±3.17; P distraction soft tissue point A' had advanced 7.10 mm (±2.69; P distraction. Maxillary horizontal relapse at point A was 14.1% at FU. Vertical relapse was not significant. This rigid intraoral distraction device can be successfully used in the correction of severe maxillary hypoplasia. The marked aesthetic improvement and low psychological encumbrance make this device viable for the treatment of cleft-related hypoplasia of the maxilla. Copyright © 2014 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

  10. Retraction: Evaluation of Carcinogenic Effects of Electromagnetic Fields (Emf

    Directory of Open Access Journals (Sweden)

    Bakir Mehic

    2010-08-01

    Full Text Available This retracts the article "EVALUATION OF CARCINOGENIC EFFECTS OF ELECTROMAGNETIC FIELDS (EMF" on page 245. The Editor-in-chief of the Bosnian Journal ofBasic Medical Sciences has decided to retract the article from Bayazit V et al. [1] entitled as: “Evaluation of carcinogenic effects of electromagnetic fields (EMF” published in Bosn J Basic Med Sci. 2010 Aug;10(3:245-50.After the editorial office was alerted of possible plagiarism in the article, it conducted thorough investigation and concluded that the article apparently represents plagiarized material from two World Health Organization reports, one European Commission report and other sources. Since this is considered scientific plagiarism and scientific misconduct, Editor-in-chief has decided to withdraw the article. The authors have agreed with the editorial office decision.

  11. TCDQ-TCT retraction and losses during asynchronous beam dump

    CERN Document Server

    Bracco, Chiara; Quaranta, Elena; CERN. Geneva. ATS Department

    2016-01-01

    The protection provided by the TCDQs in case of asynchronous beam dump depends strongly on their correct setup. They have to respect the strict hierarchy of the full collimation system and shield the tertiary collimators in the experimental regions. This MD aimed at performing asynchronous beam dump tests with different configurations, in order to assess the minimum allowed retraction between TCTs and TCDQs and, as a consequence, on the The protection provided by the TCDQs in case of asynchronous beam dump depends strongly on their correct setup. They have to respect the strict hierarchy of the full collimation system and shield the tertiary collimators in the experimental regions. This MD aimed at performing asynchronous beam dump tests with different configurations, in order to assess the minimum allowed retraction between TCTs and TCDQs and, as a consequence, on the β* reach.

  12. Epidemic genital retraction syndrome: environmental and personal risk factors in southern China.

    Science.gov (United States)

    Cheng, S T

    1997-01-01

    Koro is the term used to define the fear that one's sex organ is retracting into the body and that the complete retraction of the organ will result in death. While koro is found mainly among the Chinese and other Asian societies near China, the condition is most prevalent in southern China, where repeated epidemics have occurred. In that region, koro is found only among the Hans, the dominant ethnic group, and is over-represented among people under age 24 years. Koro provokes considerable anxiety in the individual in question and his/her family and neighbors, and is more prevalent among males than females. Men try to pull the penis out from the body or to prevent it from shrinking further by tying a string around the penis or securing it with a clamping device. Some Asian women have reported shrinking breasts, nipples, or labia. Relatives and neighbors of the same sex often help to rescue the organ in question, especially in applying anchoring devices. Others may also believe a person has koro and attempt to rescue their organ without the individual's consent. Injury to the sex organ, including bruises, bleeding, and infection, is common and sometimes results in permanent damage. In general, however, koro attacks are acute, brief, and tend not to recur. The 1984-85 koro epidemic in Hainan Island and Leizhou Peninsula is reviewed to shed light upon prevailing cultural attitudes and beliefs, news and rumors about koro, and anxiety in neighborhoods which may be causative environmental risk factors for koro. Education, age, and marital status are considered as individual risk factors. Koro in China is best described as a social sickness supported by cultural myths which tend to affect young people who are deprived of proper sex information to explain their physical development.

  13. Retracted: Effect of Paris polyphylla extract on second- degree burns ...

    African Journals Online (AJOL)

    2018-01-26

    Jan 26, 2018 ... Retracted: Ma Z, Yin W, Hu G, Zhu Z, Huang Z. Effect of Paris polyphylla extract on second-degree burns in rats. Trop J Pharm Res 2016; 15(10):2131-2135 doi: http://dx.doi.org/10.4314/tjpr.v15i10.11. From the Editor. Our attention was drawn to the falsification of the data published in this article which was ...

  14. Retractions of the gingival margins evaluated by holographic methods

    Science.gov (United States)

    Sinescu, Cosmin; Negrutiu, Meda Lavinia; Manole, Marius; de Sabata, Aldo; Rusu, Laura-Cristina; Stratul, Stefan; Dudea, Diana; Dughir, Ciprian; Duma, Virgil-Florin

    2015-05-01

    The periodontal disease is one of the most common pathological states of the teeth and gums system. The issue is that its evaluation is a subjective one, i.e. it is based on the skills of the dental medical doctor. As for any clinical condition, a quantitative evaluation and monitoring in time of the retraction of the gingival margins is desired. This phenomenon was evaluated in this study with a holographic method by using a He-Ne laser with a power of 13 mW. The holographic system we have utilized - adapted for dentistry applications - is described. Several patients were considered in a comparative study of their state of health - regarding their oral cavity. The impressions of the maxillary dental arch were taken from a patient during his/her first visit and after a period of six months. The hologram of the first model was superposed on the model cast after the second visit. The retractions of the gingival margins could be thus evaluated three-dimensionally in every point of interest. An evaluation of the retraction has thus been made. Conclusions can thus be drawn for the clinical evaluation of the health of the teeth and gums system of each patient.

  15. Duane retraction syndrome: causes, effects and management strategies

    Directory of Open Access Journals (Sweden)

    Kekunnaya R

    2017-10-01

    Full Text Available Ramesh Kekunnaya, Mithila Negalur Pediatric Ophthalmology and Strabismus Services, Child Sight Institute, Jasti V Ramannama Children’s Eye Care Center, KAR Campus, Hyderabad, India Abstract: Duane retraction syndrome (DRS is a congenital eye movement anomaly characterized by variable horizontal duction deficits, with narrowing of the palpebral fissure and globe retraction on attempted adduction, occasionally accompanied by upshoot or downshoot. The etiopathogenesis of this condition can be explained by a spectrum of mechanical, innervational, neurologic and genetic abnormalities occurring independently or which influence each other giving rise to patterns of clinical presentations along with a complex set of ocular and systemic anomalies. Huber type I DRS is the most common form of DRS with an earlier presentation, while Huber type II is the least common presentation. Usually, patients with unilateral type I Duane syndrome have esotropia more frequently than exotropia, those with type II have exotropia and those with type III have esotropia and exotropia occurring equally common. Cases of bilateral DRS may have variable presentation depending upon the type of presentation in each eye. As regards its management, DRS classification based on primary position deviation as esotropic, exotropic or orthotropic is more relevant than Huber’s classification before planning surgery. Surgical approach to these patients is challenging and must be individualized based on the amount of ocular deviation, abnormal head position, associated globe retraction and overshoots. Keywords: Duane syndrome, strabismus surgery, esotropia, overshoots

  16. Umbilical cord Wharton's jelly repeated culture system: a new device and method for obtaining abundant mesenchymal stem cells for bone tissue engineering.

    Directory of Open Access Journals (Sweden)

    Zhengqi Chang

    Full Text Available To date, various types of cells for seeding regenerative scaffolds have been used for bone tissue engineering. Among seed cells, the mesenchymal stem cells derived from human umbilical cord Wharton's jelly (hUCMSCs represent a promising candidate and hold potential for bone tissue engineering due to the the lack of ethical controversies, accessibility, sourced by non-invasive procedures for donors, a reduced risk of contamination, osteogenic differentiation capacities, and higher immunomodulatory capacity. However, the current culture methods are somewhat complicated and inefficient and often fail to make the best use of the umbilical cord (UC tissues. Moreover, these culture processes cannot be performed on a large scale and under strict quality control. As a result, only a small quantity of cells can be harvested using the current culture methods. To solve these problems, we designed and evaluated an UC Wharton's jelly repeated culture device. Using this device, hUCMSCs were obtained from the repeated cultures and their quantities and biological characteristics were compared. We found that using our culture device, which retained all tissue blocks on the bottom of the dish, the total number of obtained cells increased 15-20 times, and the time required for the primary passage was reduced. Moreover, cells harvested from the repeated cultures exhibited no significant difference in their immunophenotype, potential for multilineage differentiation, or proliferative, osteoinductive capacities, and final osteogenesis. The application of the repeated culture frame (RCF not only made full use of the Wharton's jelly but also simplified and specified the culture process, and thus, the culture efficiency was significantly improved. In summary, abundant hUCMSCs of dependable quality can be acquired using the RCF.

  17. The visibility of scientific misconduct: A review of the literature on retracted journal articles.

    Science.gov (United States)

    Hesselmann, Felicitas; Graf, Verena; Schmidt, Marion; Reinhart, Martin

    2017-10-01

    Retractions of scientific articles are becoming the most relevant institution for making sense of scientific misconduct. An increasing number of retracted articles, mainly attributed to misconduct, is currently providing a new empirical basis for research about scientific misconduct. This article reviews the relevant research literature from an interdisciplinary context. Furthermore, the results from these studies are contextualized sociologically by asking how scientific misconduct is made visible through retractions. This study treats retractions as an emerging institution that renders scientific misconduct visible, thus, following up on the sociology of deviance and its focus on visibility. The article shows that retractions, by highlighting individual cases of misconduct and general policies for preventing misconduct while obscuring the actors and processes through which retractions are effected, produce highly fragmented patterns of visibility. These patterns resemble the bifurcation in current justice systems.

  18. Short time efficacy and safety of focused monopolar radiofrequency device for labial laxity improvement-noninvasive labia tissue tightening. A prospective cohort study.

    Science.gov (United States)

    Fistonić, Ivan; Sorta Bilajac Turina, Iva; Fistonić, Nikola; Marton, Ingrid

    2016-03-01

    To evaluate safety and efficacy of focused monopolar radio frequency (RF) device for non-invasive labia tissue tightening and improvement of labial laxity. This prospective cohort study participants were 17 female subjects aged between 27 and 56 years with lax skin at the labia area. All subjects received four consecutive treatments at 7-day intervals with RF device (Exilis Protege IntimaR, BTL Industries Inc., Boston, MA). The primary efficacy outcome measure was defined as one or more point improvement on 1-4 scale for vulva appearance determined by three blinded evaluators. Digital photographs were taken at the baseline and 1 month after the last treatment. Sexual gratification was assessed with Female Sexual Functioning Index (FSFI) and patient discomfort by Visual Analogue Scale (VAS). An average 2.9 (of maximum 4) points improvement rate in vulvar appearance was observed (P RF device for non-invasive labia tissue tightening. The treatment is effective and safe with high patient satisfaction. © 2016 Wiley Periodicals, Inc.

  19. Retraction of publications in nursing and midwifery research: A systematic review.

    Science.gov (United States)

    Al-Ghareeb, Amal; Hillel, Stav; McKenna, Lisa; Cleary, Michelle; Visentin, Denis; Jones, Martin; Bressington, Daniel; Gray, Richard

    2018-05-01

    Rates of manuscript retraction in academic journals are increasing. Papers are retracted because of scientific misconduct or serious error. To date there have been no studies that have examined rates of retraction in nursing and midwifery journals. A systematic review of Journal Citation Report listed nursing science journals. The Medline database was searched systematically from January 1980 through July 2017, and www.retractionwatch.com was manually searched for relevant studies that met the inclusion criteria. Two researchers undertook title and abstract and full text screening. Data were extracted on the country of the corresponding author, journal title, impact factor, study design, year of retraction, number of citations after retraction, and reason for retraction. Journals retraction index was also calculated. Twenty-nine retracted papers published in nursing science journals were identified, the first in 2007. This represents 0.029% of all papers published in these journals since 2007. We observed a significant increase in the retraction rate of 0.44 per 10,000 publications per year (95% CI; 0.03-0.84, p = .037). There was a negative association between a journal's retraction index and impact factor with a significant reduction in retraction index of -0.57 for a one-point increase in impact factor (95% CI; -1.05 to -0.09, p = .022). Duplicate publication was the most common reason for retraction (n = 18, 58%). The mean number of citations manuscripts received after retraction was seven, the highest was 52. Most (n = 27, 93.1%) of the retracted papers are still available online (with a watermark indicating they are retracted). Compared to more established academic disciplines, rates of retraction in nursing and midwifery are low. Findings suggest that unsound research is not being identified and that the checks and balances incumbent in the scientific method are not working. In a clinical discipline, this is concerning and may indicate that

  20. 78 FR 18360 - Prospective Grant of Start-Up Exclusive License: Manual Device for Constructing Tissue Micro...

    Science.gov (United States)

    2013-03-26

    ... Service, HHS. ACTION: Notice. SUMMARY: This is notice, in accordance with 35 U.S.C. 209(c)(1) and 37 CFR... and Device for Preparing Sample Arrays''; by Hewitt et al. (NCI); and U.S. Patent No. 6,951,761 9 (E... Executive Boulevard, Suite 325, Rockville, MD 20852-3804; Email: [email protected] ; Telephone: 301- 435...

  1. Pancreatic Tissue Transplanted in TheraCyte Encapsulation Devices Is Protected and Prevents Hyperglycemia in a Mouse Model of Immune-Mediated Diabetes.

    Science.gov (United States)

    Boettler, Tobias; Schneider, Darius; Cheng, Yang; Kadoya, Kuniko; Brandon, Eugene P; Martinson, Laura; von Herrath, Matthias

    2016-01-01

    Type 1 diabetes (T1D) is characterized by destruction of glucose-responsive insulin-producing pancreatic β-cells and exhibits immune infiltration of pancreatic islets, where CD8 lymphocytes are most prominent. Curative transplantation of pancreatic islets is seriously hampered by the persistence of autoreactive immune cells that require high doses of immunosuppressive drugs. An elegant approach to confer graft protection while obviating the need for immunosuppression is the use of encapsulation devices that allow for the transfer of oxygen and nutrients, yet prevent immune cells from making direct contact with the islet grafts. Here we demonstrate that macroencapsulation devices (TheraCyte) loaded with neonatal pancreatic tissue and transplanted into RIP-LCMV.GP mice prevented disease onset in a model of virus-induced diabetes mellitus. Histological analyses revealed that insulin-producing cells survived within the device in animal models of diabetes. Our results demonstrate that these encapsulation devices can protect from an immune-mediated attack and can contain a sufficient amount of insulin-producing cells to prevent overt hyperglycemia.

  2. Space closure using the Hycon device. A case report.

    Science.gov (United States)

    Kachiwala, Viral A; Kalha, Anmol S; Vigneshwaran, J

    2007-05-01

    Space closure can be a difficult and uncomfortable procedure. Appliances able to be activated by the patient may reduce the number of visits for adjustment. To describe the closure of spaces with the Hycon device, an intra-oral screw that can be activated by the patient. Sliding mechanics were used to retract the upper and lower anterior teeth following extraction of the first premolars in a patient with bimaxillary protrusion. The active force for retraction was derived from the Hycon device activated twice a week by the patient. The rate of space closure achieved was of the order of 1.9 mm/month. The extraction spaces were closed by distal movement of the anterior teeth and mesial movement of the posterior teeth. The Hycon device proved to be an effective means of retracting the anterior teeth and protracting the posterior teeth. Because the device can be activated by the patient fewer visits for adjustment may be required.

  3. Tissue engineering

    CERN Document Server

    Fisher, John P; Bronzino, Joseph D

    2007-01-01

    Increasingly viewed as the future of medicine, the field of tissue engineering is still in its infancy. As evidenced in both the scientific and popular press, there exists considerable excitement surrounding the strategy of regenerative medicine. To achieve its highest potential, a series of technological advances must be made. Putting the numerous breakthroughs made in this field into a broad context, Tissue Engineering disseminates current thinking on the development of engineered tissues. Divided into three sections, the book covers the fundamentals of tissue engineering, enabling technologies, and tissue engineering applications. It examines the properties of stem cells, primary cells, growth factors, and extracellular matrix as well as their impact on the development of tissue engineered devices. Contributions focus on those strategies typically incorporated into tissue engineered devices or utilized in their development, including scaffolds, nanocomposites, bioreactors, drug delivery systems, and gene t...

  4. A Radially Organized Multipatterned Device as a Diagnostic Tool for the Screening of Topographies in Tissue Engineering Biomaterials

    NARCIS (Netherlands)

    Babo, P.S.; Klymov, A.; Riet, J. te; Reis, R.L.; Jansen, J.A.; Gomes, M.E.; Walboomers, X.F.

    2016-01-01

    Micro- and nanotextured biomaterial surfaces have been widely studied for their capacity to drive the regeneration of organized tissues. Nanotopographical features in the shape of groove-ridge patterns aim at mimicking the extracellular matrix organization. However, to date, a wide array of groove

  5. Measurement of temperature elevation in tissue for the optimum and safe use of scalpel-type ultrasonic surgery devices

    International Nuclear Information System (INIS)

    Koch, C; Nuernberger, H; Reimann, H P

    2004-01-01

    Using temperature sensors of specific design, the temperature elevation during application of a Harmonic Scalpel was determined in liver tissue. The influence of different treatment techniques and application parameters on the heat produced was determined. The measurements can be used to assess the risk of harmful bioeffects and to optimise performance and treatment techniques with respect to minimum thermal load

  6. Surgical effects in patients with Duane retraction syndrome

    Directory of Open Access Journals (Sweden)

    Shui-Lian Zhou

    2017-03-01

    Full Text Available AIM: To investigate the clinical characteristics and surgical effects in patients with Duane retraction syndrome(DRS.METHODS: Totally 13 patients with DRS during June 2011 to December 2015 were analyzed retrospectively. The data including clinical types and manifestations, surgical methods and outcomes were reviewed and analyzed. RESULTS: There were 11 male cases and 2 female cases who all had no ocular and systemic anomalies. The left eye was involved in 9 cases, the right eye was involved in 3 cases and 1 case involved in both eyes. Six cases were type Ⅰ,1 case was typeⅡand 6 cases were type Ⅲ. Eleven cases had abnormal head posture(AHP, 9 cases had the up- or down-shoot phenomenon. The surgical treatment was designed according to subtypes and clinical features which included medial rectus recession, lateral rectus recession, recession of both horizontal rectus muscles and lateral rectus recession combined with Y splitting. After surgery, horizontal deviation was less than ±10△ in all patients, and AHP disappeared in 4 cases and improved in 7 cases. The up- or down-shoot and global retraction disappeared in 5 cases and improved in 4 cases. Simultaneously, the restriction of ocular motility was improved in all patients. CONCLUSION: The clinical features of DRS are variant in different types. Detailed examination before surgery and reasonable surgical design are important in treatment of patients with DRS.

  7. [Retraction of papers in bioethics: proposal for a paradigmatic case].

    Science.gov (United States)

    Herranz Rodríguez, Gonzalo

    2011-01-01

    The phenomenon of ethically deficient publication in the field of bioethics is practically unknown. In contrast to the numerous articles and regulations on the ethics of biomedical publications, there is a practical absence of articles devoted to consider the nature, types and prevalence of ethically defective publications in the bioethical literature. No regulatory framework for misbehavior in this field has been proposed until now. Certainly, this is a difficult subject. On one side, it is not easy to draw the ethical limits of the freedoms of thought and expression in bioethics, a discipline that flourishes in the open debate of principles, norms, cases, and imaginary scenarios, where the boundaries between rhetoric and misrepresentation are frequently blurred. After showing some examples of minor violations taken from the literature, the author deals with the moral duty to retract fraudulent bioethical articles, especially when they include deliberate distortions of the data or conclusions from published biomedical research. A detailed analysis of a fraudulent article is made (Haring B. ″New Dimensions of Responsible Parenthood. ″ Theological Studies 37, (1976), 120-132), in which an almost systematic distortion of data and opinions of the cited literature has been made. The article, published in a time of intense and critical protest against the encyclical Humanae vitae, pretends to condemn the methods of natural family planning, the only acceptable means to the Pope, on the allegation that those methods were harmful for the embryo and fetus. According to the author, the retraction of Haring's article is necessary.

  8. Large fully retractable telescope enclosures still closable in strong wind

    Science.gov (United States)

    Bettonvil, Felix C. M.; Hammerschlag, Robert H.; Jägers, Aswin P. L.; Sliepen, Guus

    2008-07-01

    Two prototypes of fully retractable enclosures with diameters of 7 and 9 m have been built for the high-resolution solar telescopes DOT (Dutch Open Telescope) and GREGOR, both located at the Canary Islands. These enclosures protect the instruments for bad weather and are fully open when the telescopes are in operation. The telescopes and enclosures also operate in hard wind. The prototypes are based on tensioned membrane between movable but stiff bows, which fold together to a ring when opened. The height of the ring is small. The prototypes already survived several storms, with often snow and ice, without any damage, including hurricane Delta with wind speeds up to 68 m/s. The enclosures can still be closed and opened with wind speeds of 20 m/s without any problems or restrictions. The DOT successfully demonstrated the open, wind-flushing concept for astronomical telescopes. It is now widely recognized that also large future telescopes benefit from wind-flushing and retractable enclosures. These telescopes require enclosures with diameters of 30 m until roughly 100 m, the largest sizes for the ELTs (Extreme Large Telescopes), which will be built in the near future. We discuss developments and required technology for the realization of these large sizes.

  9. When Scholarly Publishing Goes Awry: Educating Ourselves and Our Patrons about Retracted Articles

    Science.gov (United States)

    Thielen, Joanna

    2018-01-01

    Retracted articles, articles that violate professional ethics, are an unsettling, yet integral, part of the scholarly publishing process seldom discussed in the academy. Unfortunately, article retractions continue to rise across all disciplines. Although academic librarians consistently provide instruction on scholarly publishing, little has been…

  10. Safety syringes and anti-needlestick devices in orthopaedic surgery.

    Science.gov (United States)

    Sibbitt, Wilmer L; Band, Philip A; Kettwich, Lawrence G; Sibbitt, Cristina R; Sibbitt, Lori J; Bankhurst, Arthur D

    2011-09-07

    The American Academy of Orthopaedic Surgery (AAOS), The Joint Commission, the Occupational Safety and Health Administration (OSHA), and the Needlestick Safety and Prevention Act encourage the integration of safety-engineered devices to prevent needlestick injuries to health-care workers and patients. We hypothesized that safety syringes and needles could be used in outpatient orthopaedic injection and aspiration procedures. The study investigated the orthopaedic uses and procedural idiosyncrasies of safety-engineered devices, including (1) four safety needles (Eclipse, SafetyGlide, SurGuard, and Magellan), (2) a mechanical safety syringe (RPD), (3) two automatic retractable syringes (Integra, VanishPoint), (4) three manual retractable syringes (Procedur-SF, Baksnap, Invirosnap), and (5) three shielded syringes (Safety-Lok, Monoject, and Digitally Activated Shielded [DAS] Syringe). The devices were first tested ex vivo, and then 1300 devices were used for 425 subjects undergoing outpatient arthrocentesis, intra-articular injections, local anesthesia, aspiration biopsy, and ultrasound-guided procedures. During the clinical observation, there were no accidental needlesticks (0 needlesticks per 1300 devices). Safety needles could be successfully used on a Luer syringe but were limited to ≤1.5 in (≤3.81 cm) in length and the shield could interfere with sonography. The mechanical safety syringes functioned well in all orthopaedic procedures. Automatic retractable syringes were too small for arthrocentesis of the knee, and the plunger blew out and prematurely collapsed with high-pressure injections. The manual retractable syringes and shielded syringes could be used with conventional needles for most orthopaedic procedures. The most effective and reliable safety devices for orthopaedic syringe procedures are shielded safety needles, mechanical syringes, manual retractable syringes, and shielded syringes, but not automatic retractable syringes. Even when adopting

  11. The dielectric properties of human pineal gland tissue and RF absorption due to wireless communication devices in the frequency range 400-1850 MHz

    International Nuclear Information System (INIS)

    Schmid, Gernot; Ueberbacher, Richard; Samaras, Theodoros; Tschabitscher, Manfred; Mazal, Peter R

    2007-01-01

    In order to enable a detailed analysis of radio frequency (RF) absorption in the human pineal gland, the dielectric properties of a sample of 20 freshly removed pineal glands were measured less than 20 h after death. Furthermore, a corresponding high resolution numerical model of the brain region surrounding the pineal gland was developed, based on a real human tissue sample. After inserting this model into a commercially available numerical head model, FDTD-based computations for exposure scenarios with generic models of handheld devices operated close to the head in the frequency range 400-1850 MHz were carried out. For typical output power values of real handheld mobile communication devices, the obtained results showed only very small amounts of absorbed RF power in the pineal gland when compared to SAR limits according to international safety standards. The highest absorption was found for the 400 MHz irradiation. In this case the RF power absorbed inside the pineal gland (organ mass 96 mg) was as low as 11 μW, when considering a device of 500 mW output power operated close to the ear. For typical mobile phone frequencies (900 MHz and 1850 MHz) and output power values (250 mW and 125 mW) the corresponding values of absorbed RF power in the pineal gland were found to be lower by a factor of 4.2 and 36, respectively. These results indicate that temperature-related biologically relevant effects on the pineal gland induced by the RF emissions of typical handheld mobile communication devices are unlikely

  12. Array-type miniature interferometer as the core optical microsystem of an optical coherence tomography device for tissue inspection

    Science.gov (United States)

    Passilly, Nicolas; Perrin, Stéphane; Lullin, Justine; Albero, Jorge; Bargiel, Sylwester; Froehly, Luc; Gorecki, Christophe; Krauter, Johann; Osten, Wolfgang; Wang, Wei-Shan; Wiemer, Maik

    2016-04-01

    Some of the critical limitations for widespread use in medical applications of optical devices, such as confocal or optical coherence tomography (OCT) systems, are related to their cost and large size. Indeed, although quite efficient systems are available on the market, e.g. in dermatology, they equip only a few hospitals and hence, are far from being used as an early detection tool, for instance in screening of patients for early detection of cancers. In this framework, the VIAMOS project aims at proposing a concept of miniaturized, batch-fabricated and lower-cost, OCT system dedicated to non-invasive skin inspection. In order to image a large skin area, the system is based on a full-field approach. Moreover, since it relies on micro-fabricated devices whose fields of view are limited, 16 small interferometers are arranged in a dense array to perform multi-channel simultaneous imaging. Gaps between each channel are then filled by scanning of the system followed by stitching. This approach allows imaging a large area without the need of large optics. It also avoids the use of very fast and often expensive laser sources, since instead of a single point detector, almost 250 thousands pixels are used simultaneously. The architecture is then based on an array of Mirau interferometers which are interesting for their vertical arrangement compatible with vertical assembly at the wafer-level. Each array is consequently a local part of a stack of seven wafers. This stack includes a glass lens doublet, an out-of-plane actuated micro-mirror for phase shifting, a spacer and a planar beam-splitter. Consequently, different materials, such as silicon and glass, are bonded together and well-aligned thanks to lithographic-based fabrication processes.

  13. Retraction: Evaluation of carcinogenic effects of electromagnetic fields (EMF).

    Science.gov (United States)

    Mehic, Bakir

    2010-11-01

    The Editor-in-chief of the Bosnian Journal of Basic Medical Sciences has decided to retract the article from Bayazit V et al. [1] entitled as: "Evaluation of carcinogenic effects of electromagnetic fields (EMF)" published in Bosn J Basic Med Sci. 2010 Aug;10(3):245-50. After the editorial office was alerted of possible plagiarism in the article, it conducted thorough investigation and concluded that the article apparently represents plagiarized material from two World Health Organization reports, one European Commission report and other sources. Since this is considered scientific plagiarism and scientific misconduct, Editor-in-chief has decided to withdraw the article. The authors have agreed with the editorial office decision.

  14. Endoscopy-Assisted Ear Surgery for Treatment of Chronic Otitis Media With Cholesteatoma, Adhesion, or Retraction Pockets.

    Science.gov (United States)

    Ulku, Cagatay Han

    2017-06-01

    The objective of this study was to analyze the results of endoscopy-assisted ear surgery for the treatment of chronic otitis media with cholesteatoma, adhesion, or retraction pockets.Fifty-one patients who underwent oto-endoscopy-assisted canal wall up tympanomastoid surgery and/or limited anterior atticotomy with tympanoplasty for chronic otitis media with cholesteatoma, adhesion, or retraction pocket from 2006 to 2013 have been included in this study. Eradication of the disease from the middle ear and mastoid air cells was achieved by combination of the oto-microscobic and oto-endoscopic approaches. Second look surgery was performed 18 months later from the initial surgery in selected patients. Age, gender, pre-/postoperative otoscopy findings/audiograms, type of the used prostheses, and follow-up time were obtained from the patient's file. Anatomic integrity rates of the tympanic membrane, the mean gains of air bone gap, on pure-tone audiogram at 4 frequencies and existence of the residual disease were reviewed parameters. Functional evaluation was made in patients with intact tympanic membrane.Of the 51 patients, the ratios of the chronic otitis media with cholesteatoma and isolated adhesive otitis or retraction pocket cases were 74.5% (38/51) and 25.5% (13/51), respectively. Ossicular chain reconstruction was made with PORP in 27 patients and TORP in 20 patients, whereas the ossicular chain was intact in 4 patients. Anatomic integrity rates of the tympanic membrane were 90.2% (46/51). The overall (n = 46) pre-/postoperative mean ABG obtained at 4 frequencies were 28.3 ± 12.26 and 9.18 ± 5.68 dB (P otitis media with cholesteatoma patients. However, there was no recurrence or new cholesteatoma formation in isolated retraction pockets or adhesive otitis patients.Oto-endoscopic eradication of the cholesteatoma or epithelial tissue from hidden area after the all visible cholesteatoma removal by oto-microscope improves the quality of surgery

  15. RETRACTED: Technology and Unemployment for Executives in Hospitals

    Directory of Open Access Journals (Sweden)

    Jayr Figueiredo de Oliveira

    2012-09-01

    Full Text Available Updated September 4, 2014. ----------------------------------------------------------------------------- RETRACTION: The paper “Technology and Unemployment for Executives in Hospitals” by Jayr Figuereido, published in vol 7 (3 2012, has been retracted by the editors because significant parts of the paper were plagiarized and without proper citation to the publication “Gondim, S. M. G., Estramiana, J. L. Á., Luna, A. d. F., Oliveira, T. S. S. d., & Souza, G. C. d. (2010. Atribuições de causas ao desemprego e valores pessoais. Estudos de Psicologia (Natal, 15, 309-317”. This strong determination was taken by the editorial committee in order to correct this misbehavior and to compensate the detriment caused to the academic community. Apologies are offered to our readers for not having spotted this problem during the edition process. We are constantly introducing more tools in our editorial process in order to avoid plagiarism and abuses like the presented in this case. It is in our greatest concern to preserve the academic integrity of our publication. --------------------------------------------------------------- Abstract: This study aims to investigate how managers of health care institutions explain the causes of unemployment, and how this explanation is related to their personal and family values, in accordance with Schwartz’s theoretical model. For that, we used two questionnaires: one analyzes the explanations for unemployment, and the other one is the Portrait Values Questionnaire (PVQ 21 – short version. Employed and formerly unemployed workers do not show any significant differences in explaining the causes of unemployment. On the other hand, regarding values, formerly unemployed workers show universalism and benevolence, values related to the self-transcendence dimension. Employed workers, in turn, show values of security, related to the conservatism dimension. The conclusion is that, even though technological innovations

  16. Retraction notice to: Environmental cadmium and zinc concentrations in liver and kidney of European hare from different Serbian regions, Zoran I. Petrović, Vlado B. Teodorović, Mirjana R. Dimitrijević, Sunčica Z. Borozan, Miloš T. Beuković, Dragica M. Nikolić, Aurelija T. Spirić , [Hem. Ind. 67 (4) 593-599 (2013) DOI: 10.2298/HEMIND120815100P

    OpenAIRE

    Editorial

    2015-01-01

    This article has been retracted at the request of authors. The retraction has been made because the authors admitted that they have done dual submission of the text and drawings from article named "Environmental Cd and Zn Concentrations in Liver and Kidney of European Hare from Different Serbian Regions: Age and Tissue Differences" published in Bull Environ Contam Toxicol (2013) 90:203-207 DOI 10.1007/s00128-012-0901-7. One of the conditions of submission...

  17. Performance Assessment of Bi-Directional Knotless Tissue-Closure Devices in Juvenile Chinook Salmon Surgically Implanted with Acoustic Transmitters, 2009 - Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Woodley, Christa M.; Wagner, Katie A.; Bryson, Amanda J.

    2012-11-09

    The purpose of this report is to assess the performance of bi-directional knotless tissue-closure devices for use in tagging juvenile salmon. This study is part of an ongoing effort at Pacific Northwest National Laboratory (PNNL) to reduce unwanted effects of tags and tagging procedures on the survival and behavior of juvenile salmonids, by assessing and refining suturing techniques, suture materials, and tag burdens. The objective of this study was to compare the performance of the knotless (barbed) suture, using three different suture patterns (treatments: 6-point, Wide “N”, Wide “N” Knot), to the current method of suturing (MonocrylTM monofilament, discontinuous sutures with a 2×2×2×2 knot) used in monitoring and research programs with a novel antiseptic barrier on the wound (“Second Skin”).

  18. Effectiveness of en masse versus two-step retraction: a systematic review and meta-analysis

    Directory of Open Access Journals (Sweden)

    Mumen Z. Rizk

    2018-01-01

    Full Text Available Abstract Background This review aims to compare the effectiveness of en masse and two-step retraction methods during orthodontic space closure regarding anchorage preservation and anterior segment retraction and to assess their effect on the duration of treatment and root resorption. Methods An electronic search for potentially eligible randomized controlled trials and prospective controlled trials was performed in five electronic databases up to July 2017. The process of study selection, data extraction, and quality assessment was performed by two reviewers independently. A narrative review is presented in addition to a quantitative synthesis of the pooled results where possible. The Cochrane risk of bias tool and the Newcastle-Ottawa Scale were used for the methodological quality assessment of the included studies. Results Eight studies were included in the qualitative synthesis in this review. Four studies were included in the quantitative synthesis. En masse/miniscrew combination showed a statistically significant standard mean difference regarding anchorage preservation − 2.55 mm (95% CI − 2.99 to − 2.11 and the amount of upper incisor retraction − 0.38 mm (95% CI − 0.70 to − 0.06 when compared to a two-step/conventional anchorage combination. Qualitative synthesis suggested that en masse retraction requires less time than two-step retraction with no difference in the amount of root resorption. Conclusions Both en masse and two-step retraction methods are effective during the space closure phase. The en masse/miniscrew combination is superior to the two-step/conventional anchorage combination with regard to anchorage preservation and amount of retraction. Limited evidence suggests that anchorage reinforcement with a headgear produces similar results with both retraction methods. Limited evidence also suggests that en masse retraction may require less time and that no significant differences exist in the amount of root

  19. RETRACTED: Measurement of parity violation in the capture of polarized neutrons on {sup 27}Al

    Energy Technology Data Exchange (ETDEWEB)

    Balascuta, S., E-mail: septimiu.balascuta@eli-np.ro [National Institute of Physics and Nuclear Engineering, Bucharest-Magurele (Romania); Arizona State University, Tempe, AZ 85287 (United States)

    2014-05-15

    This article has been retracted: please see Elsevier Policy on Article Withdrawal ( (http://www.elsevier.com/locate/withdrawalpolicy)). This article has been retracted at the request of Author and agreed by the Editors. The author unwittingly used certain data from a collaboration that he was not entitled to use. The author would like to apologize for this error, which was made in good faith. As a consequence, pages 37–60 originally occupied by the retracted article are missing from the printed issue. The publisher apologizes for any inconvenience this may cause.

  20. RETRACTED: Measurement of parity violation in the capture of polarized neutrons on 27Al

    International Nuclear Information System (INIS)

    Balascuta, S.

    2014-01-01

    This article has been retracted: please see Elsevier Policy on Article Withdrawal ( (http://www.elsevier.com/locate/withdrawalpolicy)). This article has been retracted at the request of Author and agreed by the Editors. The author unwittingly used certain data from a collaboration that he was not entitled to use. The author would like to apologize for this error, which was made in good faith. As a consequence, pages 37–60 originally occupied by the retracted article are missing from the printed issue. The publisher apologizes for any inconvenience this may cause

  1. Quantification of intrusive/retraction force and moment generated during en-masse retraction of maxillary anterior teeth using mini-implants: A conceptual approach

    Directory of Open Access Journals (Sweden)

    A. Sumathi Felicita

    Full Text Available ABSTRACT Objective: The aim of the present study was to clarify the biomechanics of en-masse retraction of the upper anterior teeth and attempt to quantify the different forces and moments generated using mini-implants and to calculate the amount of applied force optimal for en-masse intrusion and retraction using mini-implants. Methods: The optimum force required for en-masse intrusion and retraction can be calculated by using simple mathematical formulae. Depending on the position of the mini-implant and the relationship of the attachment to the center of resistance of the anterior segment, different clinical outcomes are encountered. Using certain mathematical formulae, accurate measurements of the magnitude of force and moment generated on the teeth can be calculated for each clinical outcome. Results: Optimum force for en-masse intrusion and retraction of maxillary anterior teeth is 212 grams per side. Force applied at an angle of 5o to 16o from the occlusal plane produce intrusive and retraction force components that are within the physiologic limit. Conclusion: Different clinical outcomes are encountered depending on the position of the mini-implant and the length of the attachment. It is possible to calculate the forces and moments generated for any given magnitude of applied force. The orthodontist can apply the basic biomechanical principles mentioned in this study to calculate the forces and moments for different hypothetical clinical scenarios.

  2. [Three dimensional finite element analysis of maxillary anterior teeth retraction with micro-implant anchorage and sliding mechanics].

    Science.gov (United States)

    Zhang, Yi; Zhang, Lei; Fan, Yu-bo; Song, Jin-lin; Deng, Feng

    2009-10-01

    To investigate the biomechanical effects of micro-implant anchorage technique with sliding mechanics on maxillary anterior teeth retraction under different implant insertion heights and different retraction hook heights. The three dimensional finite element model of maxillary anterior teeth retraction force system was constructed with CT scanning and MIMICS software and the relationships between brackets, teeth, wire and micro-implant were simulating the clinical factions. Then the initial tooth displacement was calculated when the insertion heights were 4 mm and 8 mm and the retraction hook heights were 1, 4, 7, 10 mm respectively. With retraction hook height added, the anterior teeth movement changed from lingual crown tipping to labial crown tipping and the intrusion movement was more apparent when the micro-implant was inserted in a higher location. The ideal teeth movement control could be achieved by different insertion heights of micro-implant and different retraction hook heights in straight wire retraction force system.

  3. Suture retraction technique to prevent parent vessel obstruction following aneurysm tandem clipping.

    Science.gov (United States)

    Rayan, Tarek; Amin-Hanjani, Sepideh

    2015-08-01

    With large or giant aneurysms, the use of multiple tandem clips can be essential for complete obliteration of the aneurysm. One potential disadvantage, however, is the considerable cumulative weight of these clips, which may lead to kinking of the underlying parent vessels and obstruction of flow. The authors describe a simple technique to address this problem, guided by intraoperative blood flow measurements, in a patient with a ruptured near-giant 2.2 × 1.7-cm middle cerebral artery bifurcation aneurysm that was treated with the tandem clipping technique. A total of 11 clips were applied in a vertical stacked fashion. The cumulative weight of the clips caused kinking of the temporal M2 branch of the bifurcation with reduction of flow. A 4-0 Nurolon suture tie was applied to the hub of one of the clips and was tethered to the dura of the sphenoid ridge by a small mini-clip and reinforced by application of tissue sealant. The patient underwent intraoperative indocyanine green videoangiography as well as catheter angiography, which demonstrated complete aneurysmal obliteration and preservation of vessel branches. Postoperative angiography confirmed patency of the bifurcation vessels with mild vasospasm. The patient had a full recovery with no postoperative complications and was neurologically intact at her 6-month follow-up. The suture retraction technique allows a simple solution to parent vessel obstruction following aneurysm tandem clipping, in conjunction with the essential guidance provided by intraoperative flow measurements.

  4. Retraction and expansion of flock mobility in central asia: costs and ...

    African Journals Online (AJOL)

    Retraction and expansion of flock mobility in central asia: costs and consequences. Carol Kerven, Ilya Ilych Alimaev, Roy Behnke, Grant Davidson, Leen Franchois, Nurlan Malmakov, Erik Mathijs, Aidos Smailov, Sayat Temirbekov, Iain Wright ...

  5. Bilateral inverse Duane′s retraction syndrome-A case report

    Directory of Open Access Journals (Sweden)

    Chatterjee Pranab

    1991-01-01

    Full Text Available Duane′s retraction syndrome is a well known congenital musculo-facial anomaly. Various explanations have been given for the aetiology of this syndrome. Inverse Duane′s retraction syndrome is a condition with reverse clinical features. Abduction of the affected eye is possible to some extent and is accompanied by retraction of the eyeball, narrowing of the palpebral fissure and pseudoptosis. There may be some restriction of movement on adduction. The primary lesion is suspected to be in the medial rectus muscle. Frequently the muscle is found to be entrapped following trauma to the medial wall of the orbit. A case of bilateral inverse Duane′s retraction syndrome and convergent squint along with left-sided perceptive deafness is reported. As is usually the case there was no structural abnormality or entrapment of the muscle from trauma.

  6. Retractable Robotic Anchor for Hard Rock and Granular Soils, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — ProtoInnovations proposes to research, develop, and validate an innovative retractable robotic anchoring mechanism that works both in hard rock and granular soils...

  7. Retraction Note: Radiation Sialadenitis Induced by High-dose Radioactive Iodine Therapy

    International Nuclear Information System (INIS)

    Jeong, Shin Young; Lee, Jaetae

    2014-01-01

    The senior author (J. Lee) and the first author (S. Y. Jeong) have retracted this review article due to misconduct. They have discovered multiple instances of misreferencing and misquotation in the text which raise the concern of potential plagiarism

  8. 14 CFR 23.729 - Landing gear extension and retraction system.

    Science.gov (United States)

    2010-01-01

    ... retracted) position. If switches are used, they must be located and coupled to the landing gear mechanical... burst, or rocks, water, and slush that may enter the landing gear bay. [Doc. No. 4080, 29 FR 17955, Dec...

  9. Retractable Robotic Anchor for Hard Rock and Granular Soils, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — ProtoInnovations, LLC, is developing an innovative retractable robotic anchor that works in hard rock and granular soils permitting anchoring and subsequent...

  10. Retraction Note: Radiation Sialadenitis Induced by High-dose Radioactive Iodine Therapy

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Shin Young; Lee, Jaetae [Kyungpook National Univ. Hospital, Daegu (Korea, Republic of)

    2014-06-15

    The senior author (J. Lee) and the first author (S. Y. Jeong) have retracted this review article due to misconduct. They have discovered multiple instances of misreferencing and misquotation in the text which raise the concern of potential plagiarism.

  11. Academic medical libraries' policies and procedures for notifying library users of retracted scientific publications.

    Science.gov (United States)

    Hughes, C

    1998-01-01

    Academic medical libraries have a responsibility to inform library users regarding retracted publications. Many have created policies and procedures that identify flawed journal articles. A questionnaire was sent to the 129 academic medical libraries in the United States and Canada to find out how many had policies and procedures for identifying retracted publications. Of the returned questionnaires, 59% had no policy and no practice for calling the attention of the library user to retracted publications. Forty-one percent of the libraries called attention to retractions with or without a formal policy for doing so. Several responding libraries included their policy statement with the survey. The increasing number of academic medical libraries that realize the importance of having policies and practices in place highlights the necessity for this procedure.

  12. Retraction: Two novel duck antibacterial peptides, avian β-defensins 9 and 10, with antimicrobial activity.

    Science.gov (United States)

    2013-01-01

    The article by Ma et al. that published in the Journal of Microbiology and Biotechnology (2009, 19: 1447-1455) was used the same data in two journal articles (Acta Veterinaria et Zootechnica Sinica, 2009, 40(9): 1320-1326, Scientia Agricultura Sinica, 2009, 42(4): 1406-1412). Therefore, the article is retracted from JMB as a misconduct of the authors. JMB as the publisher regrets for any inconvenience may have caused by the retraction to readers.

  13. RETRACTED: Effect of flux jump on temperature distributions in high temperature superconductors

    Science.gov (United States)

    Zhao, Yu-Feng; He, Tian-Hu; Wang, Ping-Bo

    2010-10-01

    This article has been retracted: please see Elsevier Policy on Article Withdrawal ( http://www.elsevier.com/locate/withdrawalpolicy). This article is retracted at the request of the authors, due to admitted plagiarism of unpublished work of Tian-Hu He. He wishes to state that he was not involved in the publication process and his name was used on the paper without his knowledge.

  14. Morphological signs of the intravital contraction (retraction of thrombotic emboli

    Directory of Open Access Journals (Sweden)

    R R Khismatullin

    2018-02-01

    Full Text Available Aim. To establish whether contraction (retraction of thrombi and thrombotic emboli occurs in vivo using structural signs of blood clot compression, such as compressive deformation of erythrocytes and redistribution of fibrin on the surface of a clot. Methods. Three postmortem pulmonary thrombotic emboli were examined by scanning electron microscopy and light microscopy after staining with hematoxylin and eosin as well as with Mallory’s method. Results. In 2 studied pulmonary emboli, extracted 7 and 15 hours after patients’ death, polyhedral erythrocytes (polyhedrocytes were revealed that were formed as a result of mechanical deformation under the action of contractile forces generated by activated platelets. In addition, the uneven distribution of fibrin within the emboli was found with displacement of fibrin to the periphery of the emboli, which is characteristic for contracted blood clot. In the first and the «oldest» clot extracted 38 hours after the patient’s death, the described contraction signs were absent, which was likely related to the postmortem autolysis or intravital pathological impairment of contraction. Conclusion. Thrombotic emboli ex vivo have morphological signs of contraction, suggesting intravital compression of the primary thrombi and/or thrombotic emboli, which might be an important pathogenetic mechanism for modulation of impaired blood flow at the sites of thrombotic occlusion of a vessel; the presence or absence of compressed erythrocytes inside and predominant location of fibrin on the periphery of a thrombus or embolus can potentially serve as additional pathomorphological criteria of death coming prescription.

  15. Management of Duane retraction syndrome with prismatic glasses

    Science.gov (United States)

    Aygit, Ebru Demet; Kocamaz, Murat; Inal, Asli; Fazil, Korhan; Ocak, Osman Bulut; Akar, Serpil; Gokyigit, Birsen

    2017-01-01

    Purpose To report the results of using prismatic glasses for Duane retraction syndrome (DRS). Methods Data were obtained from the records of patients who were evaluated during the year 2000 in the Strabismus Unit of the Beyoglu Eye Training and Research Hospital. The average follow-up was 12.2±17.7 months. In all cases, 2 main variables were evaluated: horizontal deviation in the primary position and face turn. Prismatic glasses were provided to patients according to the degree of shift in the primary position. Results The mean age of patients was 11.2 years. An analysis was performed on the data collected from 12 cases; 7 patients were females (58.3%) and 5 were males (41.7%), with 11 (91.7%) cases being of type I DRS. All 12 patients had abnormal head posture (face turn) and an angle of mean deviation equaling 10 PD (prism dioptri). Conclusion Treatment was individualized on a case-by-case basis. Prismatic glasses are useful for eliminating abnormal head posture and ocular misalignment in selected cases. PMID:28442887

  16. Management of Duane retraction syndrome with prismatic glasses

    Directory of Open Access Journals (Sweden)

    Aygit ED

    2017-04-01

    Full Text Available Ebru Demet Aygit,1 Murat Kocamaz,1 Asli Inal,1 Korhan Fazil,1 Osman Bulut Ocak,1 Serpil Akar,2 Birsen Gokyigit1 1Strabismus Department, Beyoglu Eye Training and Research Hospital, Istanbul, Turkey; 2Ophthalmology Department, Medicine Faculty, Baskent University, Istanbul, Turkey Purpose: To report the results of using prismatic glasses for Duane retraction syndrome (DRS. Methods: Data were obtained from the records of patients who were evaluated during the year 2000 in the Strabismus Unit of the Beyoglu Eye Training and Research Hospital. The average follow-up was 12.2±17.7 months. In all cases, 2 main variables were evaluated: horizontal deviation in the primary position and face turn. Prismatic glasses were provided to patients according to the degree of shift in the primary position. Results: The mean age of patients was 11.2 years. An analysis was performed on the data collected from 12 cases; 7 patients were females (58.3% and 5 were males (41.7%, with 11 (91.7% cases being of type I DRS. All 12 patients had abnormal head posture (face turn and an angle of mean deviation equaling 10 PD (prism dioptri. Conclusion: Treatment was individualized on a case-by-case basis. Prismatic glasses are useful for eliminating abnormal head posture and ocular misalignment in selected cases. Keywords: Duane, prismatic glasses, abnormal head posture

  17. Why does ‘PubPeer’ not acknowledge ‘Retraction Watch’ as a media source?

    Directory of Open Access Journals (Sweden)

    Jaime A. Teixeira da Silva

    2017-05-01

    Full Text Available Retraction Watch is a social media organization that relies on a blog to transmit information primarily about retractions in the scientific literature. One of the Retraction Watch co-founders, Ivan Oransky, is in fact a “Distinguished Writer in Residence at New York University’s Carter Journalism Institute” and the vice president of the Association of Health Care Journalists. Sharing a common funder, a philanthropic organization, the Laura and John Arnold Foundation, Retraction Watch regularly coordinates with a whistle-blower website that refers to itself as an “online journal club”, PubPeer. Retraction Watch regularly cites and refers to PubPeer, and vice versa. It is therefore surprising that PubPeer does not list Retraction Watch on its “Press” and media coverage page. This potentially deliberate omission may be equivalent to a hidden conflict of interest, undermining the ethical fortitude and image of these science watchdogs, and fortifying the fake news era.

  18. Stress Distribution during Rapid Canine Retraction with a Distraction Device: A Finite Element Study

    Directory of Open Access Journals (Sweden)

    Nareen Chakravarthy Challagulla

    2013-01-01

    Conclusion: The periodontium in the maxillary first molar region showed the maximum stress and the canine showed unequal stress distribution with more stress at the crest of the alveolar bone and lesser stress at the apical region which lessens root resorption.

  19. 77 FR 24513 - Certain Electronic Devices Having a Retractable USB Connector; Notice of Receipt of Complaint...

    Science.gov (United States)

    2012-04-24

    ...; Centon Electronics, Inc. of CA; Coby Electronics Corporation of NY; Corsair Memory, Inc. of CA; Emtec... America of NJ; Patriot Memory LLC of CA; Provantage LLC of OH; RITEK Corporation of Taiwan; Advanced Media.... of CA; Supersonic, Inc. of CA; Super Talent Technology Corporation of CA; Toshiba Corporation of...

  20. 77 FR 31039 - Certain Electronic Devices Having a Retractable USB Connector; Institution of Investigation...

    Science.gov (United States)

    2012-05-24

    ... Ave., Lake Success, NY 11042. Corsair Memory, Inc., 46221 Landing Parkway, Fremont, CA 94538. Emtec..., Secaucus, NJ 07094. Patriot Memory LLC, 47027 Benicia Street, Fremont, CA 94538. Provantage LLC, 7249.... Supersonic, Inc., 6555 Bandini Boulevard, Commerce, CA 90040. Super Talent Technology Corporation, 2077 North...

  1. 77 FR 75189 - Certain Electronic Devices Having a Retractable USB Connector; Termination of an Investigation

    Science.gov (United States)

    2012-12-19

    ... during official business hours (8:45 a.m. to 5:15 p.m.) in the Office of the Secretary, U.S... Option has been dissolved and is no longer in existence. On November 28, 2012, the ALJ granted the motion...

  2. Eye retraction and rotation during Corvis ST 'air puff' intraocular pressure measurement and its quantitative analysis.

    Science.gov (United States)

    Boszczyk, Agnieszka; Kasprzak, Henryk; Jóźwik, Agnieszka

    2017-05-01

    The aim of this study was to analyse the indentation and deformation of the corneal surface, as well as eye retraction, which occur during air puff intraocular pressure (IOP) measurement. A group of 10 subjects was examined using a non-contact Corvis ST tonometer, which records image sequences of corneas deformed by an air puff. Obtained images were processed numerically in order to extract information about corneal deformation, indentation and eyeball retraction. The time dependency of the apex deformation/eye retraction ratio and the curve of dependency between apex indentation and eye retraction take characteristic shapes for individual subjects. It was noticed that the eye globes tend to rotate towards the nose in response to the air blast during measurement. This means that the eye globe not only displaces but also rotates during retraction. Some new parameters describing the shape of this curve are introduced. Our data show that intraocular pressure and amplitude of corneal indentation are inversely related (r 8  = -0.83, P = 0.0029), but the correlation between intraocular pressure and amplitude of eye retraction is low and not significant (r 8  = -0.24, P = 0.51). The curves describing corneal behaviour during air puff tonometry were determined and show that the eye globe rotates towards the nose during measurement. In addition, eye retraction amplitudes may be related to elastic or viscoelastic properties of deeper structures in the eye or behind the eye and this should be further investigated. Many of the proposed new parameters present comparable or even higher repeatability than the standard parameters provided by the Corvis ST. © 2017 The Authors Ophthalmic & Physiological Optics © 2017 The College of Optometrists.

  3. RETRACTED: Fueling doubt and openness: experiencing the unconscious, constructed nature of perception induces uncertainty and openness to change.

    Science.gov (United States)

    Hart, William; Tullett, Alexa M; Shreves, Wyley B; Fetterman, Zachary

    2015-04-01

    This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). The article has been retracted at the request of the Editor-in-Chief, Steven Sloman, following a request by the authors. The reason for the retraction is that the article includes fabricated or manipulated data. Copyright © 2014 Elsevier B.V. All rights reserved.

  4. Retraction notice to "Biomass supply chain optimisation for Organosolv-based biorefineries" [Bioresour. Technol. 159 (2014) 387-396].

    Science.gov (United States)

    Giarola, Sara; Patel, Mayank; Shah, Nilay

    2014-11-01

    This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Authors. This article has been retracted because it includes important elements of an unpublished model which has been developed by others. The authors believe that the most responsible course of action is to retract their paper. The Authors deeply regret this circumstance and apologize to the scientific community. Copyright © 2014 Elsevier Ltd. All rights reserved.

  5. A Comprehensive Analysis of Articles Retracted Between 2004 and 2013 from Biomedical Literature – A Call for Reforms

    Directory of Open Access Journals (Sweden)

    Harkanwal Preet Singh

    2014-07-01

    Full Text Available Science is a dynamic subject and it was never free of misconduct or bad research. Indeed, the scientific method itself is intended to overcome mistakes and misdeeds. So, we aimed to assess various factors associated with retraction of scientific articles from 2004 to 2013. Data were retrieved from PubMed and Medline using the keywords retraction of articles, retraction notice, and withdrawal of article in April 2014 to detect articles retracted from 2004 to 2013. Statistical analysis was carried out using t-test and Karl Pearson's correlation coefficient. Results showed that a total of 2343 articles were retracted between 2004 and 2013, and original articles followed by case reports constituted major part of it. Time interval between submission and retraction of article has reduced in recent times. Impact factor and retraction do not have any significant correlation. We conclude that although retraction of articles is a rare event, its constant rise in scientific literature is quite worrisome. It is still unclear whether misconduct/mistakes in articles are increasing hastily or the articles are retracted at a rapid rate in recent times. So, it should be considered as an urgent issue and it is the responsibility of journal editors to track misconduct by following Committee on Publication Ethics (COPE guidelines and making an effective strategy.

  6. The retraction of the protoplast during PCD is an active, and interruptible, calcium-flux driven process.

    Science.gov (United States)

    Kacprzyk, Joanna; Brogan, Niall P; Daly, Cara T; Doyle, Siamsa M; Diamond, Mark; Molony, Elizabeth M; McCabe, Paul F

    2017-07-01

    The protoplast retracts during apoptosis-like programmed cell death (AL-PCD) and, if this retraction is an active component of AL-PCD, it should be used as a defining feature for this type of programmed cell death. We used an array of pharmacological and genetic tools to test if the rates of protoplast retraction in cells undergoing AL-PCD can be modulated. Disturbing calcium flux signalling, ATP synthesis and mitochondrial permeability transition all inhibited protoplast retraction and often also the execution of the death programme. Protoplast retraction can precede loss of plasma membrane integrity and cell death can be interrupted after the protoplast retraction had already occurred. Blocking calcium influx inhibited the protoplast retraction, reduced DNA fragmentation and delayed death induced by AL-PCD associated stresses. At higher levels of stress, where cell death occurs without protoplast retraction, blocking calcium flux had no effect on the death process. The results therefore strongly suggest that retraction of the protoplast is an active biological process dependent on an early Ca 2+ -mediated trigger rather than cellular disintegration due to plasma membrane damage. Therefore this morphologically distinct cell type is a quantifiable feature, and consequently, reporter of AL-PCD. Copyright © 2017 Elsevier B.V. All rights reserved.

  7. Randomized clinical trial comparing control of maxillary anchorage with 2 retraction techniques.

    Science.gov (United States)

    Xu, Tian-Min; Zhang, Xiaoyun; Oh, Hee Soo; Boyd, Robert L; Korn, Edward L; Baumrind, Sheldon

    2010-11-01

    The objective of this pilot randomized clinical trial was to investigate the relative effectiveness of anchorage conservation of en-masse and 2-step retraction techniques during maximum anchorage treatment in patients with Angle Class I and Class II malocclusions. Sixty-four growing subjects (25 boys, 39 girls; 10.2-15.9 years old) who required maximum anchorage were randomized to 2 treatment techniques: en-masse retraction (n = 32) and 2-step retraction (n = 32); the groups were stratified by sex and starting age. Each patient was treated by a full-time clinic instructor experienced in the use of both retraction techniques at the orthodontic clinic of Peking University School of Stomatology in China. All patients used headgear, and most had transpalatal appliances. Lateral cephalograms taken before treatment and at the end of treatment were used to evaluate treatment-associated changes. Differences in maxillary molar mesial displacement and maxillary incisor retraction were measured with the before and after treatment tracings superimposed on the anatomic best fit of the palatal structures. Differences in mesial displacement of the maxillary first molar were compared between the 2 treatment techniques, between sexes, and between different starting-age groups. Average mesial displacement of the maxillary first molar was slightly less in the en-masse group than in the 2-step group (mean, -0.36 mm; 95% CI, -1.42 to 0.71 mm). The average mesial displacement of the maxillary first molar for both treatment groups pooled (n = 63, because 1 patient was lost to follow-up) was 4.3 ± 2.1 mm (mean ± standard deviation). Boys had significantly more mesial displacement than girls (mean difference, 1.3 mm; P <0.03). Younger adolescents had significantly more mesial displacement than older adolescents (mean difference, 1.3 mm; P <0.02). Average mesial displacement of the maxillary first molar with 2-step retraction was slightly greater than that for en-masse retraction, but the

  8. Effect of a cordless retraction paste on titanium surface: a topographic, chemical and biocompatibility evaluation

    Directory of Open Access Journals (Sweden)

    Katherine Cooper

    2013-06-01

    Full Text Available Good exposure of the preparation margins and haemostasis in the sulcular gingiva are necessary for accurate impressions to produce precise restorations. The use of cordless retraction paste material in implant dentistry is a relatively novel application. However, few studies have been conducted on the use of retraction pastes and their possible interaction with implant surfaces. Recent literature has described remnants on titanium implant surfaces and expressed the need for an assessment of the biocompatibility of the exposed surface (Chang et al.. This in vitro study evaluated the effect of a cordless gingival retraction paste on sterile titanium disks. Surface chemistry was determined using energy-dispersive X-ray spectroscopy (EDS, and further investigated using laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS. After exposure to retraction paste, surface chemistry alterations were identified. A fibroblast cell line (L929 was exposed to the disks and the live/dead viability/cytotoxicity assay was used to determine any effects on the proliferation and health of cells. The disks exposed to the retraction paste showed fewer dead cells compared to the unexposed disks. This was statistically significant.

  9. The persistence of error: a study of retracted articles on the Internet and in personal libraries.

    Science.gov (United States)

    Davis, Philip M

    2012-07-01

    To determine the accessibility of retracted articles residing on non-publisher websites and in personal libraries. Searches were performed to locate Internet copies of 1,779 retracted articles identified in MEDLINE, published between 1973 and 2010, excluding the publishers' website. Found copies were classified by article version and location. Mendeley (a bibliographic software) was searched for copies residing in personal libraries. Non-publisher websites provided 321 publicly accessible copies for 289 retracted articles: 304 (95%) copies were the publisher' versions, and 13 (4%) were final manuscripts. PubMed Central had 138 (43%) copies; educational websites 94 (29%); commercial websites 24 (7%); advocacy websites 16 (5%); and institutional repositories 10 (3%). Just 16 [corrected] (5%) full-article views included a retraction statement. Personal Mendeley libraries contained records for 1,340 (75%) retracted articles, shared by 3.4 users, on average. The benefits of decentralized access to scientific articles may come with the cost of promoting incorrect, invalid, or untrustworthy science. Automated methods to deliver status updates to readers may reduce the persistence of error in the scientific literature.

  10. A Miniature Robot for Retraction Tasks under Vision Assistance in Minimally Invasive Surgery

    Directory of Open Access Journals (Sweden)

    Giuseppe Tortora

    2014-03-01

    Full Text Available Minimally Invasive Surgery (MIS is one of the main aims of modern medicine. It enables surgery to be performed with a lower number and severity of incisions. Medical robots have been developed worldwide to offer a robotic alternative to traditional medical procedures. New approaches aimed at a substantial decrease of visible scars have been explored, such as Natural Orifice Transluminal Endoscopic Surgery (NOTES. Simple surgical tasks such as the retraction of an organ can be a challenge when performed from narrow access ports. For this reason, there is a continuous need to develop new robotic tools for performing dedicated tasks. This article illustrates the design and testing of a new robotic tool for retraction tasks under vision assistance for NOTES. The retraction robots integrate brushless motors to enable additional degrees of freedom to that provided by magnetic anchoring, thus improving the dexterity of the overall platform. The retraction robot can be easily controlled to reach the target organ and apply a retraction force of up to 1.53 N. Additional degrees of freedom can be used for smooth manipulation and grasping of the organ.

  11. Review of various liver retraction techniques in single incision laparoscopic surgery for the exposure of hiatus.

    Science.gov (United States)

    Palanivelu, Praveenraj; Patil, Kedar Pratap; Parthasarathi, Ramakrishnan; Viswambharan, Jaiganesh K; Senthilnathan, Palanisami; Palanivelu, Chinnusamy

    2015-01-01

    The main aspect of concern for upper GI procedures has been the retraction of the liver especially large left lobes as commonly encountered in Bariatric surgery. Not doing so would compromise the view of the hiatus, hence theoretically reducing the quality of the surgery and increasing the possibility of complications. The aim of this study was to review the various liver retraction techniques in single incision surgery being done at our institute and analyze them. A retrospective study of the various techniques and a subsequent analysis was made based on advantages and disadvantages of each method. Objectively a quantitative measure of hiatal exposure was done using a scoring system based on the grade of exposure after reviewing the surgical videos. From January 2011 to January 2013 total 104 patients underwent single incision surgery with the various liver retraction techniques with following grades of exposure -liver suspension tube technique with naso gastric tubing (2.11) and with corrugated drain (2.09) needlescopic method (1.2), Umbilical tape sling (1.95), crural stitch method (2.5). Needeloscopic method has the best grade of exposure and is the easiest to start with. The average time to create the liver retraction was 2.8 to 8.6 min.There was no procedure related morbidity or mortality. The mentioned liver retraction techniques are cost effective and easy to learn. We recommend using these techniques to have a good exposure of hiatus, without compromising the safety of surgery in single incision surgery.

  12. Comparison of cerebral tissue oxygenation values in full term and preterm newborns by the simultaneous use of two near-infrared spectroscopy devices: an absolute and a relative trending oximeter

    Science.gov (United States)

    Szczapa, Tomasz; Karpiński, Łukasz; Moczko, Jerzy; Weindling, Michael; Kornacka, Alicja; Wróblewska, Katarzyna; Adamczak, Aleksandra; Jopek, Aleksandra; Chojnacka, Karolina; Gadzinowski, Janusz

    2013-08-01

    The aim of this study is to compare a two-wavelength light emitting diode-based tissue oximeter (INVOS), which is designed to show trends in tissue oxygenation, with a four-wavelength laser-based oximeter (FORE-SIGHT), designed to deliver absolute values of tissue oxygenation. Simultaneous values of cerebral tissue oxygenation (StO2) are measured using both devices in 15 term and 15 preterm clinically stable newborns on the first and third day of life. Values are recorded simultaneously in two periods between which oximeter sensor positions are switched to the contralateral side. Agreement between StO2 values before and after the change of sensor position is analyzed. We find that mean cerebral StO2 values are similar between devices for term and preterm babies, but INVOS shows StO2 values spread over a wider range, with wider standard deviations than shown by the FORE-SIGHT. There is relatively good agreement with a bias up to 3.5% and limits of agreement up to 11.8%. Measurements from each side of the forehead show better repeatability for the FORE-SIGHT monitor. We conclude that performance of the two devices is probably acceptable for clinical purposes. Both performed sufficiently well, but the use of FORE-SIGHT may be associated with tighter range and better repeatability of data.

  13. Tulip deformity with Cera atrial septal defect devices: a report of 3 cases.

    Science.gov (United States)

    Kohli, Vikas

    2015-02-01

    Device closure of secundum atrial septal defect (ASD) is the treatment of choice when anatomy is favourable. Amplatzer device has remained the gold standard for closure of ASD. Cobra deformity is a well-reported problem with devices. Recently, Tulip deformity has been reported in a single case. We report a series of cases where we noted Tulip deformity along with inability to retract the device in the sheath in Cera Lifetech devices. This resulted in prolongation of procedure, excessive fluoroscopic exposure and additional interventional procedures not usually anticipated in ASD device closure. We believe that the problem is due to the stiffness of the device resulting in its inability to be retracted into the sheath. We also report a unique way of retrieving the device.

  14. Correcting false information in memory: manipulating the strength of misinformation encoding and its retraction.

    Science.gov (United States)

    Ecker, Ullrich K H; Lewandowsky, Stephan; Swire, Briony; Chang, Darren

    2011-06-01

    Information that is presumed to be true at encoding but later on turns out to be false (i.e., misinformation) often continues to influence memory and reasoning. In the present study, we investigated how the strength of encoding and the strength of a later retraction of the misinformation affect this continued influence effect. Participants read an event report containing misinformation and a subsequent correction. Encoding strength of the misinformation and correction were orthogonally manipulated either via repetition (Experiment 1) or by imposing a cognitive load during reading (Experiment 2). Results suggest that stronger retractions are effective in reducing the continued influence effects associated with strong misinformation encoding, but that even strong retractions fail to eliminate continued influence effects associated with relatively weak encoding. We present a simple computational model based on random sampling that captures this effect pattern, and conclude that the continued influence effect seems to defy most attempts to eliminate it.

  15. Emergency retraction mechanism for the manipulator arm of a nuclear reactor vessel inspection apparatus

    International Nuclear Information System (INIS)

    1980-01-01

    Nuclear reactor vessels are made using numerous welds. These have to be inspected, often using ultrasonic transducers mounted on a manipulator arm. This invention seeks to solve the problem of retracting the manipulator arm should an emergency occur while it is fully extended, particularly within one of the reactor vessel nozzles. Of specific concern is the situation where power fails with the manipulator arm so extended. Details are given of an emergency retraction mechanism for use in reactor vessel inspection apparatus. A manual retraction means is used; the manipulator arm is slidably mounted within a frame. This comprises a member mounted on the arm for looping engagement by a cable, the cable being fixed at one end of the arm frame and engaging the member, and a clamp for detachably securing the cable at its other end to the arm frame at a point which is accessible from above the vessel. (U.K.)

  16. MODEL CORRELATION STUDY OF A RETRACTABLE BOOM FOR A SOLAR SAIL SPACECRAFT

    Science.gov (United States)

    Adetona, O.; Keel, L. H.; Oakley, J. D.; Kappus, K.; Whorton, M. S.; Kim, Y. K.; Rakpczy, J. M.

    2005-01-01

    To realize design concepts, predict dynamic behavior and develop appropriate control strategies for high performance operation of a solar-sail spacecraft, we developed a simple analytical model that represents dynamic behavior of spacecraft with various sizes. Since motion of the vehicle is dominated by retractable booms that support the structure, our study concentrates on developing and validating a dynamic model of a long retractable boom. Extensive tests with various configurations were conducted for the 30 Meter, light-weight, retractable, lattice boom at NASA MSFC that is structurally and dynamically similar to those of a solar-sail spacecraft currently under construction. Experimental data were then compared with the corresponding response of the analytical model. Though mixed results were obtained, the analytical model emulates several key characteristics of the boom. The paper concludes with a detailed discussion of issues observed during the study.

  17. RETRACTED: A novel membrane-based anti-diabetic action of atorvastatin

    Energy Technology Data Exchange (ETDEWEB)

    Horvath, Emily M.; Tackett, Lixuan [Department of Cellular and Integrative Physiology, Indiana University School of Medicine, Center for Diabetes Research, VanNuys Medical Science, Building Rm 308A, Indianapolis, IN 46202 (United States); Elmendorf, Jeffrey S., E-mail: jelmendo@iupui.edu [Department of Cellular and Integrative Physiology, Indiana University School of Medicine, Center for Diabetes Research, VanNuys Medical Science, Building Rm 308A, Indianapolis, IN 46202 (United States); Department of Biochemistry and Molecular Biology, Indiana University School of Medicine, Center for Diabetes Research, Indianapolis, IN 46202 (United States)

    2008-08-08

    This article has been retracted. Please see Elsevier Policy on Article Withdrawal ((http://www.elsevier.com/locate/withdrawalpolicy)). Reason: The editors would like to confirm the retraction of this paper at the request of the authors. One of the authors, Emily M. Horvath, admitted to altering data in two of the figures. Specifically in Figures 2, and 4A, some of the values were incorrectly reported for the radioactive glucose uptake assays. None of the other authors associated with this publication were aware of the data manipulation. The authors sincerely regret if this has caused problems with investigators that have used this information experimentally.

  18. RETRACTED: A novel membrane-based anti-diabetic action of atorvastatin

    International Nuclear Information System (INIS)

    Horvath, Emily M.; Tackett, Lixuan; Elmendorf, Jeffrey S.

    2008-01-01

    This article has been retracted. Please see Elsevier Policy on Article Withdrawal ((http://www.elsevier.com/locate/withdrawalpolicy)). Reason: The editors would like to confirm the retraction of this paper at the request of the authors. One of the authors, Emily M. Horvath, admitted to altering data in two of the figures. Specifically in Figures 2, and 4A, some of the values were incorrectly reported for the radioactive glucose uptake assays. None of the other authors associated with this publication were aware of the data manipulation. The authors sincerely regret if this has caused problems with investigators that have used this information experimentally.

  19. RETRACTED: Early Cretaceous origin of the Woyla Arc (Sumatra, Indonesia) on the Australian plate

    Science.gov (United States)

    Advokaat, Eldert L.; Bongers, Mayke L. M.; Rudyawan, Alfend; BouDagher-Fadel, Marcelle K.; Langereis, Cor G.; van Hinsbergen, Douwe J. J.

    2018-04-01

    This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy) The authors contacted the Editor shortly after publication stating that they have been made aware of errors in their data files and the paleomagnetic directions, site averages, and paleolatitudes that lie at the basis of their interpretations are incorrect. Because this error concerns the heart of the paper, the authors have decided to retract. A revised version of the article will be submitted for peer review.

  20. RETRACTED: Synthesis, characterization and catalytic activity of silver nanoparticles using Tribulus terrestris leaf extract

    Science.gov (United States)

    Ashokkumar, S.; Ravi, S.; Kathiravan, V.; Velmurugan, S.

    2014-03-01

    This article has been retracted: please see Elsevier Policy on Article Withdrawal. This article has been retracted at the request of the Editor. The article contains duplicate images (Fig. 5A and B as well as Fig. 5C and D) which differ only in magnification and orientation despite being described as different samples. Figure 3 displays duplicated data despite being described as different samples. The scientific community takes a very strong view on this scientific misbehavior and apologies are offered to readers of the journal that this was not detected during the submission process.

  1. On retracting properties and covering homotopy theorem for S-maps into Sχ-cofibrations and Sχ-fibrations

    Directory of Open Access Journals (Sweden)

    Amin Saif

    2016-10-01

    Full Text Available In this paper we generalize the retracting property in homotopy theory for topological semigroups by introducing the notions of deformation S-retraction with its weaker forms and ES-homotopy extension property. Furthermore, the covering homotopy theorems for S-maps into Sχ-fibrations and Sχ-cofibrations are introduced and pullbacks for Sχ-fibrations behave properly.

  2. Notice of retraction: Role of Cerebrospinal Fluid in Spaceflight-induced Ocular Changes and Visual Impairment in Astronauts.

    Science.gov (United States)

    Alperin, Noam; Bagci, Ahmet M; Oliu, Carlos J; Lee, Sang H; Lam, Byron L

    2017-10-16

    Notice of retraction: the article "Role of Cerebral Spinal Fluid in Space Flight Induced Ocular Changes and Visual Impairment in Astronauts" by Alperin et al This article has been retracted due to security concerns raised by NASA, the sponsoring agency. © RSNA, 2017.

  3. Incidence of tissue coring during transseptal catheterization when using electrocautery and a standard transseptal needle.

    Science.gov (United States)

    Greenstein, Eugene; Passman, Rod; Lin, Albert C; Knight, Bradley P

    2012-04-01

    The application of radiofrequency electrocautery to a standard, open-ended transseptal needle has been used to facilitate transseptal puncture (TSP). The purpose of this study was to determine the incidence of cardiac tissue coring when this technique is used. A model using excised swine hearts submerged in a saline-filled basin was developed to simulate TSP with electrocautery and a standard transseptal needle. Punctures were performed without the use of electrocautery and by delivering radiofrequency energy to the transseptal needle using a standard electrocautery pen at 3 target sites (fossa ovalis, non-fossa ovalis septum, and aorta). The tissue of the submerged heart was gently tented, and the needle was advanced on delivery of radiofrequency. The devices were retracted, and the needle was flushed in a collection basin. None of the TSPs without cautery caused tissue coring. For TSPs using electrocautery, the frequency of coring was at least 21% for any puncture permutation used in the study and averaged 37% at septal sites (Pelectrocautery and a standard open-ended Brockenbrough needle resulted in coring of the septal tissue in 35% of cases (33 of 96 punctures).

  4. Erratum: Retraction Note to: "The Second Version of the OCARS Catalog of Optical Characteristics of Astrometric Radio Sources" [Astronomy Reports 60, 996 (2016)

    Science.gov (United States)

    Malkin, Z. M.

    2018-04-01

    The Editor-in-Chief is retracting this article [1] because data from the RFC catalog, http://astrogeo.org/rfc, were used without permission from the copyright holder. The author admitted the decision to retract.

  5. Propagation of errors in citation networks: a study involving the entire citation network of a widely cited paper published in, and later retracted from, the journal Nature

    NARCIS (Netherlands)

    Vet, Van Der Paul E.; Nijveen, Harm

    2016-01-01

    Background
    In about one in 10,000 cases, a published article is retracted. This very often means that the results it reports are flawed. Several authors have voiced concerns about the presence of retracted research in the memory of science. In particular, a retracted result is propagated by

  6. Propagation of errors in citation networks: a study involving the entire citation network of a widely cited paper published in, and later retracted from, the journal Nature

    NARCIS (Netherlands)

    van der Vet, P.E.; Nijveen, Harmen

    2016-01-01

    Background In about one in 10,000 cases, a published article is retracted. This very often means that the results it reports are flawed. Several authors have voiced concerns about the presence of retracted research in the memory of science. In particular, a retracted result is propagated by citing

  7. Eugregarine trophozoite detachment from the host epithelium via epimerite retraction: Fiction or fact?

    Czech Academy of Sciences Publication Activity Database

    Valigurová, A.; Michalková, V.; Koudela, Břetislav

    2009-01-01

    Roč. 39, č. 11 (2009), s. 1235-1242 ISSN 0020-7519 R&D Projects: GA MŠk LC522 Institutional research plan: CEZ:AV0Z60220518 Keywords : Apicomplexa * epimerite retraction * trophozoite Subject RIV: GJ - Animal Vermins ; Diseases, Veterinary Medicine Impact factor: 3.819, year: 2009

  8. Bifenthrin causes neurite retraction in the absence of cell death: a model for pesticide associated neurodegeneration.

    Science.gov (United States)

    Nandi, Avishek; Chandil, Daljit; Lechesal, Rethabile; Pryor, Stephen C; McLaughlin, Ashlea; Bonventre, Josephine A; Flynnx, Katherine; Weeks, Benjamin S

    2006-05-01

    Bifenthrin is a synthetic pyrethroid insecticide derivative of naturally occurring pyrethrins from chrysanthemum flowers. Bifenthrin is considered relatively safe and therefore incorporated as the active ingredient in preparations sold over the counter for household use. Recent studies have raised concern that chronic exposure to pesticides in the home setting may increase the risk for neurodegenerative diseases. To address this concer, in the present study, bifenthrin is added to pre-differentiated PC12 and effect of bifenthrin on the retraction of existing neurites is observed a model for neurodegeneration. PC12 cells were differentiated with nerve growth factor for twenty-four hours and then treated with what was determined to be a sublethal dose of bifenthrin for up to an additional 48 hours. The percent of cells with neurites was assessed at various times before and after nerve growth factor treatment. Bifenthrin toxicity was determined using trypan blue exclusion. Bifenthrin was not toxic to PC12 cells at concentrations ranging from 1 x 10(-10) M to 1 x 10(-4) M. Twenty-four hours after nerve growth factor treatment, a maximum percent of cells had formed neurites and with a treatment of 1 x 10(-5) M bifenthrin, approximately 80% of these neurites retracted in within 12 additional hours and almost all neurites had retracted within 48 hours. Trypan exclusion showed that these cells were viable. These data show that bifenthrin can stimulate the retraction of neurites in the absence of frank toxicity.

  9. Retraction of "Women's Preference for Attractive Makeup Tracks Changes in Their Salivary Testosterone".

    Science.gov (United States)

    2016-03-01

    At the request of the authors, the following article has been retracted by the Editor and publishers of Psychological Science:Fisher, C. I., Hahn, A. C., DeBruine, L. M., & Jones, B. C. (2015). Women's preference for attractive makeup tracks changes in their salivary testosterone. Psychological Science, 26, 1958-1964. doi:10.1177/0956797615609900. © The Author(s) 2016.

  10. Time-Dependent Response of Polypropylene/Clay Nanocomposites Under Tension and Retraction

    DEFF Research Database (Denmark)

    Drozdov, Aleksey; Christiansen, Jesper de Claville

    2013-01-01

    Observations are reported in relaxation tests under tension and retraction on polypropylene/clay nanocomposites with various contents of filler. A two-phase constitutive model is developed in cyclic viscoelasticity and viscoplasticity of nanocomposites. Adjustable parameters in the stress–strain ...

  11. CT features of malignant hepatic tumors : the significance of capsular retraction

    International Nuclear Information System (INIS)

    Seo, Bo Kyoung; Rhee, Ji Yong; Seol, Hae Young; Lee, Ki Yeol; Park, Cheol Min; Chung, Kyoo Byung

    1998-01-01

    To evaluate the prevalence of capsular retraction in malignant hepatic tumors and the factors involved. Between January 1994 and December 1996, we retrospectively reviewed the CT scans of 152 patients with pathologically-proven, peripherally-located, malignant hepatic tumors. We evaluated size, site, portal and hepatic venous obstruction, bile duct dilatation, and liver atrophy in 18 cases involving capsular retraction. The overall prevalence of capsular retraction among malignant hepatic tumors was 18/152 (12 %); the prevalence was 9/129 (7%) in hepatocellular carcinoma, 6/14 (43 %) in cholangiocarcinoma and 3/9 (33 %) in metastatic cancer; among cases of cholangiocarcinoma and metastatic cancer, the prevalence was high (p<0.05). Portal venous obstruction was seen in six patients with hepatocellular carcinoma ( a high incidence; p=0.04) and one with cholangiocarcinoma. Hepatic venous obstruction was demonstrated in one patient with hepatocellular carcinoma and one with cholangiocarcinoma. Among cholangiocarcinoma patients, bile duct obstruction was seen in four and liver atrophy in three, but among metastatic cancer cases there were no similar findings. The main factors causing capsular retraction were portal venous obstruction in hepatocellular carcinoma and bile duct obstruction and liver atrophy in cholangiocarcinoma. (author). 16 refs., 3 figs

  12. [Simultaneous intrusion and retraction of the anterior teeth using a three-piece base arch].

    Science.gov (United States)

    Liu, D; Bai, D; Wang, C; Sun, W; Guo, J; Xi, R

    2000-06-01

    To evaluate the effects of the three-piece base arch on overbite correction of Class II malocclusion. 20 patients with high angle, flared incisors were treated using a three-piece base arch appliance. The intrusion force of four upper incisors was adjusted to approximately 50 g. The line of force action was 2 mm distally to the resistant center(RC) and the retraction force was 20 g, the right and left posterior segments were joined by a palatal bar. Cephalograms were taken before treatment (T1) and six months after treatment (T2). The upper molars moved mesially 0.60 +/- 0.35 mm and the distance of the vertical extrusion was 0.80 +/- 0.52 mm. The distances of the upper central incisor retraction and intrusion were -4.20 +/- 2.12 mm and 3.10 +/- 0.54 mm respectively. The RC of the central incisor retracted -4.12 +/- 1.96 mm and intruded 3.20 +/- 0.66 mm. The axial inclination of the upper incisor-palatal plane changed from 123.21 degrees +/- 4.26 degrees to 116.00 degrees +/- 3.96 degrees. The three-piece segmented approach can effectively intrude and retract the upper anterior teeth for flared incisors and deep overbite.

  13. RETRACTED: Investigation into the kinetic behavior of molten aluminum pressureless infiltration into SiC preforms

    Directory of Open Access Journals (Sweden)

    Hassan Sharifi

    2016-10-01

    According to the policy of our Journal, this paper has been retracted because of sheer plagiarism. This paper has been published at the same time in the International Journal of Materials Research (IJMR: http://dx.doi.org/10.3139/146.111422.

  14. Assessment of Eustachian tube function in patients with tympanic membrane retraction and in normal subjects.

    Science.gov (United States)

    Canali, Inesângela; Petersen Schmidt Rosito, Letícia; Siliprandi, Bruno; Giugno, Cláudia; Selaimen da Costa, Sady

    The diagnosis of Eustachian tube dysfunctions is essential for better understanding of the pathogenesis of chronic otitis media. A series of tests to assess tube function are described in the literature; however, they are methodologically heterogeneous, with differences ranging from application protocols to standardization of tests and their results. To evaluate the variation in middle ear pressure in patients with tympanic membrane retraction and in normal patients during tube function tests, as well as to evaluate intra-individual variation between these tests. An observational, contemporary, cross-sectional study was conducted, in which the factor under study was the variation in middle ear pressure during tube function tests (Valsalva maneuver, sniff test, Toynbee maneuver) in healthy patients and in patients with mild and moderate/severe tympanic retraction. A total of 38 patients (76 ears) were included in the study. Patients underwent tube function tests at two different time points to determine pressure measurements after each maneuver. Statistical analysis was performed using SPSS software, version 18.0, considering p-values <0.05 as statistically significant. Mean (standard deviation) age was 11 (2.72) years; 55.3% of patients were male and 44.7% female. The prevalence of type A tympanogram was higher among participants with healthy ears and those with mild retraction, whereas type C tympanograms were more frequent in the moderate/severe retraction group. An increase in middle ear pressure was observed during the Valsalva maneuver at the first time point evaluated in all three groups of ears (p=0.012). The variation in pressure was not significant either for the sniff test or for the Toynbee maneuver at the two time points evaluated (p≥0.05). Agreement between measurements obtained at the two different time points was weak to moderate for all tests in all three groups of ears, and the variations in discrepancy between measurements were higher in ears

  15. Pectoralis Major Tear with Retracted Tendon: How to Fill the Gap? Reconstruction with Hamstring Autograft and Fixation with an Interference Screw

    Directory of Open Access Journals (Sweden)

    L. Baverel

    2017-01-01

    Full Text Available Rupture of the pectoralis major tendon is considered an uncommon injury and a significant number of ruptures are missed or diagnosed late, leading to a chronic tear. We report an open reconstruction technique and its outcomes in a case of chronic and retracted PM tear. At the last follow-up (12 months, the patient was pain-free, with a visual analogic scale at 0 all the time. He was very satisfied concerning the cosmetic and clinical results. The constant score was 93%, the SST value 95%, and the Quick DASH score 4.5. MRI performed one year postoperatively confirmed the continuity between PM tendon and graft, even if the aspect of the distal tendon seemed to be thinner than normal PM tendon. The excellent clinical outcomes at one-year follow-up suggest that PM tear with major tendon retraction can be reliably reconstructed with hamstring autograft, using a bioabsorbable screw to optimize the fixation device. This technique has proven its simplicity and efficiency to fill the gap.

  16. Effects of sulfur-based hemostatic agents and gingival retraction cords handled with latex gloves on the polymerization of polyvinyl siloxane impression materials

    Directory of Open Access Journals (Sweden)

    Carlos Eduardo Palhares Machado

    2011-12-01

    Full Text Available OBJECTIVES: This study investigated the possible interactions between three addition silicone materials (Express®, Aquasil Ultra® and Adsil®, three hemostatic agents (ferric sulfate, StatGel FS®; aluminum sulfate, GelCord®; and aluminum chloride, Hemostop® and gingival retraction cords previously handled with latex gloves to determine whether direct contact with medicaments or indirect contamination by latex in conditions similar to those found in clinical practice inhibit or affect the setting of the impression materials. MATERIAL AND METHODS: A portable device for the simultaneous test of several specimens was specifically developed for this study. Polymerization inhibition was analyzed by examination of the impressions and the molded surface. Ten trials were performed for each addition silicone material used in the study, at a total of 240 study samples. RESULTS: All the samples tested (N=240 were nonreactive regardless of the type of combination used. CONCLUSIONS: Aluminum sulfate, ferric sulfate and aluminum chloride hemostatic solutions did not show any inhibitory potential on the addition silicone samples under study, and there were no changes in polymerization as a result of contact between addition silicone and retraction cords handled with latex gloves.

  17. Effects of sulfur-based hemostatic agents and gingival retraction cords handled with latex gloves on the polymerization of polyvinyl siloxane impression materials.

    Science.gov (United States)

    Machado, Carlos Eduardo Palhares; Guedes, Carlos Gramani

    2011-01-01

    This study investigated the possible interactions between three addition silicone materials (Express®, Aquasil Ultra® and Adsil®), three hemostatic agents (ferric sulfate, StatGel FS®; aluminum sulfate, GelCord®; and aluminum chloride, Hemostop®) and gingival retraction cords previously handled with latex gloves to determine whether direct contact with medicaments or indirect contamination by latex in conditions similar to those found in clinical practice inhibit or affect the setting of the impression materials. A portable device for the simultaneous test of several specimens was specifically developed for this study. Polymerization inhibition was analyzed by examination of the impressions and the molded surface. Ten trials were performed for each addition silicone material used in the study, at a total of 240 study samples. All the samples tested (N=240) were nonreactive regardless of the type of combination used. Aluminum sulfate, ferric sulfate and aluminum chloride hemostatic solutions did not show any inhibitory potential on the addition silicone samples under study, and there were no changes in polymerization as a result of contact between addition silicone and retraction cords handled with latex gloves.

  18. Finite element analysis of rapid canine retraction through reducing resistance and distraction

    Directory of Open Access Journals (Sweden)

    Junjie XUE

    2014-01-01

    Full Text Available Objective: The aims of this study were to compare different surgical approaches to rapid canine retraction by designing and selecting the most effective method of reducing resistance by a three-dimensional finite element analysis. Material and Methods: Three-dimensional finite element models of different approaches to rapid canine retraction by reducing resistance and distraction were established, including maxillary teeth, periodontal ligament, and alveolar. The models were designed to dissect the periodontal ligament, root, and alveolar separately. A 1.5 N force vector was loaded bilaterally to the center of the crown between first molar and canine, to retract the canine distally. The value of total deformation was used to assess the initial displacement of the canine and molar at the beginning of force loading. Stress intensity and force distribution were analyzed and evaluated by Ansys 13.0 through comparison of equivalent (von Mises stress and maximum shear stress. Results: The maximum value of total deformation with the three kinds of models occurred in the distal part of the canine crown and gradually reduced from the crown to the apex of the canine; compared with the canines in model 3 and model 1, the canine in model 2 had the maximum value of displacement, up to 1.9812 mm. The lowest equivalent (von Mises stress and the lowest maximum shear stress were concentrated mainly on the distal side of the canine root in model 2. The distribution of equivalent (von Mises stress and maximum shear stress on the PDL of the canine in the three models was highly concentrated on the distal edge of the canine cervix. . Conclusions: Removal of the bone in the pathway of canine retraction results in low stress intensity for canine movement. Periodontal distraction aided by surgical undermining of the interseptal bone would reduce resistance and effectively accelerate the speed of canine retraction.

  19. Review of various liver retraction techniques in single incision laparoscopic surgery for the exposure of hiatus

    Directory of Open Access Journals (Sweden)

    Praveenraj Palanivelu

    2015-01-01

    Full Text Available Background: The main aspect of concern for upper GI procedures has been the retraction of the liver especially large left lobes as commonly encountered in Bariatric surgery. Not doing so would compromise the view of the hiatus, hence theoretically reducing the quality of the surgery and increasing the possibility of complications. The aim of this study was to review the various liver retraction techniques in single incision surgery being done at our institute and analyze them. Material and Methods: A retrospective study of the various techniques and a subsequent analysis was made based on advantages and disadvantages of each method. Objectively a quantitative measure of hiatal exposure was done using a scoring system based on the grade of exposure after reviewing the surgical videos. From January 2011 to January 2013 total 104 patients underwent single incision surgery with the various liver retraction techniques with following grades of exposure -liver suspension tube technique with naso gastric tubing (2.11 and with corrugated drain (2.09 needlescopic method (1.2, Umbilical tape sling (1.95, crural stitch method (2.5. Needeloscopic method has the best grade of exposure and is the easiest to start with. The average time to create the liver retraction was 2.8 to 8.6 min.There was no procedure related morbidity or mortality. Conclusions: The mentioned liver retraction techniques are cost effective and easy to learn. We recommend using these techniques to have a good exposure of hiatus, without compromising the safety of surgery in single incision surgery.

  20. Chitosan inhibits platelet-mediated clot retraction, increases platelet-derived growth factor release, and increases residence time and bioactivity of platelet-rich plasma in vivo.

    Science.gov (United States)

    Deprés-Tremblay, Gabrielle; Chevrier, Anik; Tran-Khanh, Nicolas; Nelea, Monica; Buschmann, Michael D

    2017-11-10

    Platelet-rich plasma (PRP) has been used to treat different orthopedic conditions, however, the clinical benefits of using PRP remain uncertain. Chitosan (CS)-PRP implants have been shown to improve meniscus, rotator cuff and cartilage repair in pre-clinical models. The purpose of this current study was to investigate in vitro and in vivo mechanisms of action of CS-PRP implants. Freeze-dried formulations containing 1% (w/v) CS (80% degree of deacetylation and number average molar mass 38 kDa), 1% (w/v) trehalose as a lyoprotectant and 42.2 mM calcium chloride as a clot activator were solubilized in PRP. Gravimetric measurements and molecular/cellular imaging studies revealed that clot retraction is inhibited in CS-PRP hybrid clots through physical coating of platelets, blood cells and fibrin strands by chitosan, which interferes with platelet aggregation and platelet-mediated clot retraction. Flow cytometry and ELISA assays revealed that platelets are activated and granules secreted in CS-PRP hybrid clots and that cumulative release of platelet-derived growth factor (PDGF-AB) and epidermal growth factor is higher from CS-PRP hybrid clots compared to PRP clots in vitro. Finally, CS-PRP implants resided for up to 6 weeks in a subcutaneous implantation model and induced cell recruitment and granulation tissue synthesis, confirming greater residency and bioactivity compared to PRP in vivo.

  1. Effect of annealing ambient on anisotropic retraction of film edges during solid-state dewetting of thin single crystal films

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Gye Hyun; Thompson, Carl V., E-mail: cthomp@mit.edu [Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 01239 (United States); Ma, Wen [Department of Nuclear Science and Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 01239 (United States); Yildiz, Bilge [Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 01239 (United States); Department of Nuclear Science and Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 01239 (United States)

    2016-08-21

    During solid-state dewetting of thin single crystal films, film edges retract at a rate that is strongly dependent on their crystallographic orientations. Edges with kinetically stable in-plane orientations remain straight as they retract, while those with other in-plane orientations develop in-plane facets as they retract. Kinetically stable edges have retraction rates that are lower than edges with other orientations and thus determine the shape of the natural holes that form during solid-state dewetting. In this paper, measurements of the retraction rates of kinetically stable edges for single crystal (110) and (100) Ni films on MgO are presented. Relative retraction rates of kinetically stable edges with different crystallographic orientations are observed to change under different annealing conditions, and this accordingly changes the initial shapes of growing holes. The surfaces of (110) and (100) films were also characterized using low energy electron diffraction, and different surface reconstructions were observed under different ambient conditions. The observed surface structures were found to correlate with the observed changes in the relative retraction rates of the kinetically stable edges.

  2. Adherence of coagulase-negative staphylococci to plastic tissue culture plates: a quantitative model for the adherence of staphylococci to medical devices.

    OpenAIRE

    Christensen, G D; Simpson, W A; Younger, J J; Baddour, L M; Barrett, F F; Melton, D M; Beachey, E H

    1985-01-01

    The adherence of coagulase-negative staphylococci to smooth surfaces was assayed by measuring the optical densities of stained bacterial films adherent to the floors of plastic tissue culture plates. The optical densities correlated with the weight of the adherent bacterial film (r = 0.906; P less than 0.01). The measurements also agreed with visual assessments of bacterial adherence to culture tubes, microtiter plates, and tissue culture plates. Selected clinical strains were passed through ...

  3. RETRACTED: Acute preoperative plasmapheresis and established blood conservation techniques.

    Science.gov (United States)

    Boldt, J; Kling, D; Zickmann, B; Jacobi, M; Dapper, F; Hempelmann, G

    1990-07-01

    Plasmapheresis performed weeks before an operation producing autologous plasma has proved to be of benefit in elective operations. First experiences in acute plasmapheresis, which is performed immediately before the operation, have been reported recently. When acute plasmapheresis is used in cardiac operations, however, it must be viewed in connection with other techniques for reducing blood consumption such as the Cell Saver (CS) and ultrafiltration devices. In 60 patients undergoing elective aortocoronary bypass grafting, acute plasmapheresis was performed, producing either platelet-poor plasma or platelet-rich plasma, in combination with either the Cell Saver or hemofiltration. Fluid balance during cardiopulmonary bypass was significantly lower in the hemofiltration patients. Postoperatively, none of these patients received donor blood, whereas 4 patients of the Cell-Saver groups needed packed red blood cells. AT-III, fibrinogen, the number of platelets, albumin, total protein, and colloid osmotic pressure were less compromised when hemofiltration was used in combination with acute plasmapheresis in contrast to combination with the Cell-Saver technique. Plasma hemoglobin was without differences during the investigation period, and polymorphonuclear elastase was less increased when platelet-rich plasma was produced preoperatively. On the first postoperative day, most of the differences between the groups had already disappeared. We conclude that when acute plasmapheresis is used in cardiac operations, discarding of plasma by the Cell Saver should be avoided and ultrafiltration devices should replace centrifugation techniques for blood conservation.

  4. Evaluating the Amount of Tooth Movement and Root Resorption during Canine Retraction with Friction versus Frictionless Mechanics Using Cone Beam Computed Tomography.

    Science.gov (United States)

    Makhlouf, Mohamed; Aboul-Ezz, Amr; Fayed, Mona Salah; Hafez, Hend

    2018-02-15

    The current study was carried out to compare the amount of tooth movement during canine retraction comparing two different retraction mechanics; friction mechanics represented by a NiTi closed coil spring versus frictionless mechanics represented by T - loop, and their effect on root resorption using Cone Beam Computed Tomography (CBCT). Ten patients were selected in a split-mouth study design that had a malocclusion that necessitates the extraction of maxillary first premolars and retraction of maxillary canines. The right maxillary canines were retracted using T - loops fabricated from 0.017 X 0.025 TMA wires. The left maxillary canines received NiTi coil spring with 150 gm of retraction force. Pre retraction and post retraction Cone Beam Computed Tomography were taken to evaluate the amount of tooth movement and root resorption using three-dimensional planes. T - loop side showed statistically significant higher mean anteroposterior measurement than NiTi coil spring side, indicating a lower amount of canine movement pre and post a canine retraction. Concerning the root resorption, there was no statistically significant change in the mean measurements of canine root length post retraction. The NiTi coil spring side showed more distal movement more than the T-loop side. Both retraction mechanics with controlled retraction force, do not cause root resorption.

  5. Mechanobiology of Platelets: Techniques to Study the Role of Fluid Flow and Platelet Retraction Forces at the Micro- and Nano-Scale

    Directory of Open Access Journals (Sweden)

    Nathan J. Sniadecki

    2011-12-01

    Full Text Available Coagulation involves a complex set of events that are important in maintaining hemostasis. Biochemical interactions are classically known to regulate the hemostatic process, but recent evidence has revealed that mechanical interactions between platelets and their surroundings can also play a substantial role. Investigations into platelet mechanobiology have been challenging however, due to the small dimensions of platelets and their glycoprotein receptors. Platelet researchers have recently turned to microfabricated devices to control these physical, nanometer-scale interactions with a higher degree of precision. These approaches have enabled exciting, new insights into the molecular and biomechanical factors that affect platelets in clot formation. In this review, we highlight the new tools used to understand platelet mechanobiology and the roles of adhesion, shear flow, and retraction forces in clot formation.

  6. Air-over-ground calculations of the neutron, prompt, and secondary-gamma free-in-air tissue kerma from the Hiroshima and Nagasaki devices

    International Nuclear Information System (INIS)

    Pace, J.V. III; Knight, J.R.; Bartine, D.E.

    1982-01-01

    This paper reports preliminary results of the two-dimensional discrete-ordinate, calculations for the air-over-ground transport of radiation from the Hiroshima and Nagasaki weapon devices. It was found that the gamma-ray kerma dominated the total kerma for both environments

  7. Retraction: Graphene-SnO2 nanocomposites decorated with quantum tunneling junctions: preparation strategies, microstructures and formation mechanism.

    Science.gov (United States)

    Simpson, Anna

    2017-09-20

    Retraction of 'Graphene-SnO 2 nanocomposites decorated with quantum tunneling junctions: preparation strategies, microstructures and formation mechanism' by Qingxiu Wang et al., Phys. Chem. Chem. Phys., 2014, 16, 19351-19357.

  8. Erratum: Retraction Note: Six-body bound system calculations in the case of effective α-core structure

    Science.gov (United States)

    The Publishers

    2017-10-01

    The paper has been retracted by the Editorial Board after an investigation on the possibility that part of the published results were obtained in collaboration with scientists not included in the author list.

  9. Open Access Works are as Reliable as Other Publishing Models at Retracting Flawed Articles from the Biomedical Literature

    Directory of Open Access Journals (Sweden)

    Elizabeth Margaret Stovold

    2014-09-01

    Full Text Available A Review of: Peterson, G.M. (2013. Characteristics of retracted open access biomedical literature: a bibliographic analysis. Journal of the American Society for Information Science and Technology. 64(12, 2428-2436. doi: 10.1002/asi.22944 Objective – To investigate whether the rate of retracted articles and citation rates post-retraction in the biomedical literature are comparable across open access, free-to-access, or pay-to-access journals. Design – Citation analysis. Setting – Biomedical literature. Subjects – 160 retracted papers published between 1st January 2001 and 31st December 2010. Methods – For the retracted papers, 100 records were retrieved from the PubMed database and 100 records from the PubMed Central (PMC open access subset. Records were selected at random, based on the PubMed identifier. Each article was assigned a number based on its accessibility using the specific criteria. Articles published in the PMC open access subset were assigned a 2; articles retrieved from PubMed that were freely accessible, but did not meet the criteria for open access were assigned a 1; and articles retrieved through PubMed which were pay-to-access were assigned a 0. This allowed articles to be grouped and compared by accessibility. Citation information was collected primarily from the Science Citation Index. Articles for which no citation information was available, and those with a lifetime citation of 0 (or 1 where the citation came from the retraction statement were excluded, leaving 160 articles for analysis. Information on the impact factor of the journals was retrieved and the analysis was performed twice; first with the entire set, and second after excluding articles published in journals with an impact factor of 10 or above (14% of the total. The average number of citations per month was used to compare citation rates, and the percentage change in citation rate pre- and post-retraction was calculated. Information was also collected

  10. Stress distribution and displacement of maxillary anterior teeth during en-masse intrusion and retraction: A FEM study

    Directory of Open Access Journals (Sweden)

    Parag Bohara

    2017-01-01

    Full Text Available Background: Space closure by en masse intrusion and retraction in orthodontics is of particular interest. Aim: The aim of this study was to evaluate the stress distribution and displacement of maxillary anterior teeth. Materials and Methods: Four different finite element models of maxillary arch were constructed to understand the nature of stresses and displacement patterns of anterior teeth during en masse intrusion and retraction on force application with different combinations of mini-implants and retraction hooks. Results: In this study, tensile stresses were seen in the cervical region and various movements of teeth such as lingual crown tipping, bodily movement, lingual root tipping, intrusion, and extrusion were observed. Conclusion: Nature of stresses changes from tensile to compressive from cervical area to apical area. Various tooth displacements suggest that different combinations of mini-implants and retraction hooks affect the direction of the tooth movement.

  11. RETRACTED: On a general class of regular rotating black holes based on a smeared mass distribution

    Science.gov (United States)

    Larranaga, Alexis; Cardenas-Avendano, Alejandro; Torres, Daniel Alexdy

    2015-04-01

    This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Editor-in-Chief. The authors have plagiarized part of a paper that had already appeared in Adv. High Energy Physics, P. Nicolini, A. Orlandi, E. Spallucci, The Final Stage of Gravitationally Collapsed Thick Matter Layers, Vol 2013 (2013), Article ID 812084 http://dx.doi.org/10.1155/2013/812084. One of the conditions of submission of a paper for publication is that authors declare explicitly that their work is original and has not appeared in a publication elsewhere. Re-use of any data should be appropriately cited. As such this article represents a severe abuse of the scientific publishing system. The scientific community takes a very strong view on this matter and apologies are offered to readers of the journal that this was not detected during the submission process.

  12. RETRACTED: The Application of Symmetric Key Cryptographic Algorithms in Wireless Sensor Networks

    Science.gov (United States)

    Si, Lingling; Ji, Zhigang; Wang, Zhihui

    This article has been retracted: please see Elsevier Policy on Article Withdrawal. This article has been retracted at the request of the Publisher. The authors have plagiarized a paper that had already appeared in "Queen's 25th Biennial Symposium on Communications", page 168-172, print ISBN 978-1-4244-5709-0, http://dx.doi.org/10.1109/BSC.2010.5472979. One of the conditions of submission of a paper for publication is that authors declare explicitly that their work is original and has not appeared in a publication elsewhere. Re-use of any data should be appropriately cited. As such this article represents a severe abuse of the scientific publishing system. The scientific community takes a very strong view on this matter and apologies are offered to readers of the journal that this was not detected during the submission process.

  13. Retraction notice to: "The Application of Symmetric Key Cryptographic Algorithms in Wireless Sensor Networks"

    Science.gov (United States)

    Si, Lingling; Ji, Zhigang; Wang, Zhihui

    This article has been retracted: please see Elsevier Policy on Article Withdrawal. This article has been retracted at the request of the Publisher. The authors have plagiarized a paper that had already appeared in "Queen's 25th Biennial Symposium on Communications", page 168-172, print ISBN 978-1-4244-5709-0. One of the conditions of submission of a paper for publication is that authors declare explicitly that their work is original and has not appeared in a publication elsewhere. Re-use of any data should be appropriately cited. As such this article represents a severe abuse of the scientific publishing system. The scientific community takes a very strong view on this matter and apologies are offered to readers of the journal that this was not detected during the submission process.

  14. RETRACTED: Growth of boron-doped diamond nanoclusters using the HFCVD technique

    Science.gov (United States)

    Azadfar, P.; Ghoranneviss, M.; Elahi, S. M.; Farhadyar, N.; Salar Elahi, A.

    2015-04-01

    This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Principal Editor. After a thorough investigation, the Editor has concluded that the review process for this article was compromised. The acceptance was based on information from one reviewer report that was submitted from an email account provided to the journal as a suggested reviewer during the submission of the article. Although purportedly a real reviewer account, the Editor has concluded that this was not of an appropriate, independent reviewer. This manipulation of the peer-review process represents a clear violation of the fundamentals of peer review, our publishing policies, and publishing ethics standards. Apologies are offered to the reviewer whose identity was assumed and to the readers of the journal that this deception was not detected during the submission process.

  15. RETRACTED: Determination of confinement efficiency in tokamaks based on current independent flux loops technique

    Directory of Open Access Journals (Sweden)

    A. Salar Elahi

    Full Text Available This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/about/our-business/policies/article-withdrawal.This article has been retracted at the request of the Editors-in-Chief.After a thorough investigation, the Editors have concluded that the acceptance of this article was based upon the positive advice of at least one illegitimate reviewer report. The report was submitted from an email account which was provided to the journal as a suggested reviewer during the submission of the article. Although purportedly a real reviewer account, the Editors have concluded that this was not of an appropriate, independent reviewer.This manipulation of the peer-review process represents a clear violation of the fundamentals of peer review, our publishing policies, and publishing ethics standards. Apologies are offered to the reviewers whose identities were assumed and to the readers of the journal that this deception was not detected during the submission process.

  16. RETRACTED: Growth and characterization of carbon nanotubes and zinc oxide nanocomposite with the PECVD technique

    Directory of Open Access Journals (Sweden)

    A. Salar Elahi

    Full Text Available This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/about/our-business/policies/article-withdrawal.This article has been retracted at the request of the Editors-in-Chief.After a thorough investigation, the Editors have concluded that the acceptance of this article was based upon the positive advice of at least one illegitimate reviewer report. The report was submitted from an email account which was provided to the journal as a suggested reviewer during the submission of the article. Although purportedly a real reviewer account, the Editors have concluded that this was not of an appropriate, independent reviewer.This manipulation of the peer-review process represents a clear violation of the fundamentals of peer review, our publishing policies, and publishing ethics standards. Apologies are offered to the reviewers whose identities were assumed and to the readers of the journal that this deception was not detected during the submission process.

  17. RETRACTED: Novel drug delivery carrier from alginate-carrageenan and glycerol as plasticizer

    Directory of Open Access Journals (Sweden)

    Handoko Darmokoesoemo

    Full Text Available This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy.This article has been retracted at the request of the Editors-in-Chief.After a thorough investigation, the Editors have concluded that the acceptance of this article was based upon the positive advice of at least three illegitimate reviewer reports. The reports were submitted from email accounts which were provided to the journal as suggested reviewers during the submission of the article. Although purportedly real reviewer accounts, the Editors have concluded that these were not of appropriate, independent reviewers.This manipulation of the peer-review process represents a clear violation of the fundamentals of peer review, our publishing policies, and publishing ethics standards. Apologies are offered to the reviewers whose identities were assumed and to the readers of the journal that this deception was not detected during the submission process.

  18. Retracted: Long-term copper toxicity in apple trees (Malus pumila Mill) and bioaccumulation in fruits.

    Science.gov (United States)

    Sun, Bai-Ye; Kan, Shi-Hong; Zhang, Yan-Zong; Wu, Jun; Deng, Shi-Huai; Liu, Chun-Sheng; Yang, Gang

    2010-01-15

    The following article from Environmental Toxicology, 'Long-term Copper Toxicity in Apple Trees (Malus pumila Mill) and Bioaccumulation in Fruits' by Bai-Ye Sun, Shi- Hong Kan, Yan-Zong Zhang, Jun Wu, Shi-Huai Deng, Chun-Sheng Liu and Gang Yang, published online on January 15, 2010 in Wiley InterScience (www.interscience.wiley.com; DOI: 10.1002/tox.20565), has been retracted by agreement between the authors, the journal Editor in Chief, Dr. Paul Tchounwou, and Wiley Periodicals, Inc. The retraction has been agreed at the request of the authors due to overlap with 'Copper Toxicity and Bioaccumulation in Chinese Cabbage (Brassica pekinensis Rupr.)' by Zhi-Ting Xiong and Hai Wang, published in Environmental Toxicology, Volume 20, pages 188-194, 2005.

  19. Backset and cervical retraction capacity among occupants in a modern car.

    Science.gov (United States)

    Jonsson, Bertil; Stenlund, Hans; Svensson, Mats Y; Björnstig, Ulf

    2007-03-01

    The horizontal distance between the back of the head and the frontal of the head restraint (backset) and rearward head movement relative to the torso (cervical retraction) were studied in different occupant postures and positions in a modern car. A stratified randomized population of 154 test subjects was studied in a Volvo V70 year model 2003 car, in driver, front passenger, and rear passenger position. In each position, the subjects adopted (i) a self-selected posture, (ii) a sagging posture, and (iii) an erect posture. Cervical retraction, backset, and vertical distance from the top of the head restraint to the occipital protuberance in the back of the head of the test subject were measured. These data were analyzed using repeated measures ANOVA and linear regression analysis with a significance level set to p self-selected posture, the average backset was 61 mm for drivers, 29 mm for front passengers, and 103 mm for rear passengers (p self-selected driving position. Backset was larger and cervical retraction capacity lower in the sagging posture than in the self-selected posture for occupants in all three occupant positions. Rear passengers had the largest backset values. Backset values decreased with increased age. The average cervical retraction capacity in self-selected posture was 35 mm for drivers, 30 mm for front passengers, and 33 mm for rear passengers (p < 0.001). Future design of rear-end impact protection may take these study results into account when trying to reduce backset before impact. Our results might be used for future development and use of BioRID manikins and rear-end tests in consumer rating test programs such as Euro-NCAP.

  20. RETRACTION (G' / G)-expansion method equivalent to the extended tanh-function method

    Science.gov (United States)

    El-Wakil, S. A.; Abdou, M. A.; El-Shewy, E. K.; Hendi, A.; Abdelwahed, H. G.

    2010-10-01

    This paper has been formally retracted on ethical grounds due to the similarity in content, presentation and style to another article published by Liu Chun-Ping in the journal Communications in Theoretical Physics (Chun-Ping 2009 Commun. Theor. Phys. 51 985). It is unfortunate that this was not detected before going to press. Our thanks go to the original author for bringing this fact to our attention. Corrections were made to this article on 22 October 2010.

  1. Comparison of canine retraction using single and Siamese edgewise brackets: An in vivo study

    Directory of Open Access Journals (Sweden)

    Zeeshan Iqbal Bhat

    2013-01-01

    Full Text Available Objectives: The purpose of this study was to check the rate of canine retraction with bodily mechanics using two different pre-adjusted edgewise bracket Systems. Materials and Methods: A split mouth study with twenty patients who were randomly selected and allotted to a single operator. Duration of canine retraction, angulation of canine during its retraction, degree of Rotation, anchorage Loss, distance between canine and premolar at different time intervals were then evaluated, pre- (To, 3 months- (T1 and canine tip touches the second premolar- (T2. Descriptive statistics including mean values and standard deviations were calculated. Paired and unpaired t-test was performed to evaluate the differences between the groups. Results: Rotation and angulation of the canines did not show significant difference in both the systems. There was statistically significant difference (P<0.01 in anchorage loss between single wing and Siamese bracket being 2.65 ±1.41 mm and 1.31 ± 0.93 respectively. There was statistically significant intergroup difference (P<0.01 in canine movement i.e distance between canine and premolar was recorded as 4.72mm (15.06 ± 1.69 to 10.34 ± 1.68mm in single wing bracket and 6.25mm in Siamese (15.52 ± 1.41 to 9.27 ± 1.94. Conclusion: In cases where high anchorage is required and the rate of canine retraction is a concern, Siamese brackets pose a definite advantage over Single wing brackets.

  2. The design and validation of a magnetic resonance imaging-compatible device for obtaining mechanical properties of plantar soft tissue via gated acquisition.

    Science.gov (United States)

    Williams, Evan D; Stebbins, Michael J; Cavanagh, Peter R; Haynor, David R; Chu, Baocheng; Fassbind, Michael J; Isvilanonda, Vara; Ledoux, William R

    2015-10-01

    Changes in the mechanical properties of the plantar soft tissue in people with diabetes may contribute to the formation of plantar ulcers. Such ulcers have been shown to be in the causal pathway for lower extremity amputation. The hydraulic plantar soft tissue reducer (HyPSTER) was designed to measure in vivo, rate-dependent plantar soft tissue compressive force and three-dimensional deformations to help understand, predict, and prevent ulcer formation. These patient-specific values can then be used in an inverse finite element analysis to determine tissue moduli, and subsequently used in a foot model to show regions of high stress under a wide variety of loading conditions. The HyPSTER uses an actuator to drive a magnetic resonance imaging-compatible hydraulic loading platform. Pressure and actuator position were synchronized with gated magnetic resonance imaging acquisition. Achievable loading rates were slower than those found in normal walking because of a water-hammer effect (pressure wave ringing) in the hydraulic system when the actuator direction was changed rapidly. The subsequent verification tests were, therefore, performed at 0.2 Hz. The unloaded displacement accuracy of the system was within 0.31%. Compliance, presumably in the system's plastic components, caused a displacement loss of 5.7 mm during a 20-mm actuator test at 1354 N. This was accounted for with a target to actual calibration curve. The positional accuracy of the HyPSTER during loaded displacement verification tests from 3 to 9 mm against a silicone backstop was 95.9% with a precision of 98.7%. The HyPSTER generated minimal artifact in the magnetic resonance imaging scanner. Careful analysis of the synchronization of the HyPSTER and the magnetic resonance imaging scanner was performed. With some limitations, the HyPSTER provided key functionality in measuring dynamic, patient-specific plantar soft tissue mechanical properties. © IMechE 2015.

  3. The Phosphatase Inhibitor Calyculin-A Impairs Clot Retraction, Platelet Activation, and Thrombin Generation

    Directory of Open Access Journals (Sweden)

    Renáta Hudák

    2017-01-01

    Full Text Available The aim of this study was to investigate the effect of the serine/threonine protein phosphatase inhibitor, calyculin-A (CLA, on clot formation and on the procoagulant activity of human platelets. Platelet-rich plasma (PRP samples were preincubated with buffer or CLA and subsequently platelets were activated by the protease-activated receptor 1 (PAR-1 activator, thrombin receptor activating peptide (TRAP. Clot retraction was detected by observing clot morphology up to 1 hour, phosphatidylserine- (PS- expression was studied by flow cytometry, and thrombin generation was measured by a fluorimetric assay. For the intracellular Ca2+ assay, platelets were loaded with calcium-indicator dyes and the measurements were carried out using a ratiometric method with real-time confocal microscopy. CLA preincubation inhibited clot retraction, PS-expression, and thrombin formation. TRAP activation elicited Ca2+ response and PS-expression in a subset of platelets. The activated PRP displayed significantly faster and enhanced thrombin generation compared to nonactivated samples. CLA pretreatment abrogated PS-exposure and clot retraction also in TRAP-activated samples. As a consequence of the inhibitory effect on calcium elevation and PS-expression, CLA significantly downregulated thrombin generation in PRP. Our results show that CLA pretreatment may be a useful tool to investigate platelet activation mechanisms that contribute to clot formation and thrombin generation.

  4. Clinical experience of a new retractable barb needle for breast lesion localization: The first 60 cases

    International Nuclear Information System (INIS)

    Urrutia, E.J.; Hawkins, I.F.; Hawkins, M.C.; Meacham, M.A.; Bland, K.I.; Copelan, E.M. III.

    1987-01-01

    Recently there has been an increase in the request to the radiologists from surgeons to localize nonpalpable breast lesions suspicious for malignancy. Currently there are several needles used for this purpose. The authors present here a new retractable barb needle which consists of a coaxial system with a 20-gauge outer cannula and a 23-gauge inner cannula with a sharp stylus with a hook spring wire soldered to it. The main advantage of this needle over other systems is the ability of the barb to be retracted and the needle repositioned. Other advantages are the strong anchoring properties of the barb, permitting retraction by the surgeon and ending fear of dislodgement, breaking, or transection as experienced with other systems. This system also lowers the radiation exposure to the patients since only one confirmatory radiograph is necessary after optimal positioning of the needle as opposed to two with the most popular system used currently. The authors have done 60 localizations in 58 patients with no failures or major complications. The area in question was successfully sampled in all cases. The authors' referring surgeons prefer this needle over other commercially available types

  5. Tendon Reattachment to Bone in an Ovine Tendon Defect Model of Retraction Using Allogenic and Xenogenic Demineralised Bone Matrix Incorporated with Mesenchymal Stem Cells.

    Directory of Open Access Journals (Sweden)

    Tanujan Thangarajah

    Full Text Available Tendon-bone healing following rotator cuff repairs is mainly impaired by poor tissue quality. Demineralised bone matrix promotes healing of the tendon-bone interface but its role in the treatment of tendon tears with retraction has not been investigated. We hypothesized that cortical demineralised bone matrix used with minimally manipulated mesenchymal stem cells will result in improved function and restoration of the tendon-bone interface with no difference between xenogenic and allogenic scaffolds.In an ovine model, the patellar tendon was detached from the tibial tuberosity and a complete distal tendon transverse defect measuring 1 cm was created. Suture anchors were used to reattach the tendon and xenogenic demineralised bone matrix + minimally manipulated mesenchymal stem cells (n = 5, or allogenic demineralised bone matrix + minimally manipulated mesenchymal stem cells (n = 5 were used to bridge the defect. Graft incorporation into the tendon and its effect on regeneration of the enthesis was assessed using histomorphometry. Force plate analysis was used to assess functional recovery.Compared to the xenograft, the allograft was associated with significantly higher functional weight bearing at 6 (P = 0.047, 9 (P = 0.028, and 12 weeks (P = 0.009. In the allogenic group this was accompanied by greater remodeling of the demineralised bone matrix into tendon-like tissue in the region of the defect (p = 0.015, and a more direct type of enthesis characterized by significantly more fibrocartilage (p = 0.039. No failures of tendon-bone healing were noted in either group.Demineralised bone matrix used with minimally manipulated mesenchymal stem cells promotes healing of the tendon-bone interface in an ovine model of acute tendon retraction, with superior mechanical and histological results associated with use of an allograft.

  6. Eye retraction in the giant guitarfish, Rhynchobatus djiddensis (Elasmobranchii: Batoidea): a novel mechanism for eye protection in batoid fishes.

    Science.gov (United States)

    Tomita, Taketeru; Murakumo, Kiyomi; Miyamoto, Kei; Sato, Keiichi; Oka, Shin-ichiro; Kamisako, Haruka; Toda, Minoru

    2016-02-01

    Eye retraction behavior has evolved independently in some vertebrate linages such as mudskippers (fish), frogs and salamanders (amphibians), and cetaceans (mammals). In this paper, we report the eye retraction behavior of the giant guitarfish (Rhynchobatus djiddensis) for the first time, and discuss its mechanism and function. The eye retraction distance was nearly the same as the diameter of the eyeball itself, indicating that eye retraction in the giant guitarfish is probably one of the largest among vertebrates. Eye retraction is achieved by unique arrangement of the eye muscle: one of the anterior eye muscles (the obliquus inferior) is directed ventrally from the eyeball and attaches to the ventral surface of the neurocranium. Due to such muscle arrangement, the obliquus inferior can pull the eyeball ventrally. This mechanism was also confirmed by electrical stimulation of the obliquus inferior. The eye retraction ability of the giant guitarfish likely represents a novel eye protection behavior of elasmobranch fishes. Copyright © 2015 Elsevier GmbH. All rights reserved.

  7. Visual Enhancement of Laparoscopic Partial Nephrectomy With 3-Charge Coupled Device Camera: Assessing Intraoperative Tissue Perfusion and Vascular Anatomy by Visible Hemoglobin Spectral Response

    Science.gov (United States)

    2010-10-01

    reliably distinguish vascular structures during hilar dissection, and detect and monitor changes in renal tissue perfus:ion dw·ing and after warm...and in 25 patients with hilar tu- mors 16 in whom perioperative outcomes were com- parable to those of peripheral tumors. In a retro- spective study...Richstone et al also reported the safe performance of LPN for hilar tumors in 17 patients.17 Repeat partial nephrectomy for ipsilat- eral tumor has

  8. Notices and Policies for Retractions, Expressions of Concern, Errata and Corrigenda: Their Importance, Content, and Context.

    Science.gov (United States)

    Teixeira da Silva, Jaime A; Dobránszki, Judit

    2017-04-01

    A retraction notice is an essential scientific historical document because it should outline the reason(s) why a scientific manuscript was retracted, culpability (if any) and any other factors that have given reason for the authors, editors, or publisher, to remove a piece of the literature from science's history books. Unlike an expression of concern (EoC), erratum or corrigendum, a retraction will usually result in a rudimentary vestige of the work. Thus, any retraction notice that does not fully indicate a set of elements related to the reason and background for the retraction serves as a poor historical document. Moreover, poorly or incompletely worded retraction notices in fact do not serve their intended purpose, i.e., to hold all parties accountable, and to inform the scientific and wider public of the problem and reason for the paper's demise. This paper takes a look at the definitions and the policies of clauses for retractions, EoCs, errata and corrigenda in place by 15 leading science, technology and medicine (STM) publishers and four publishing-related bodies that we believe have the greatest influence on the current fields of science, technology and medicine. The primary purpose was to assess whether there is a consistency among these entities and publishers. Using an arbitrary 5-scale classification system, and evaluating the different categories of policies separately, we discovered that in almost all cases (88.9 %), the wording used to define these four categories of polices differs from that of the Committee on Publication Ethics (COPE), which is generally considered to be the guiding set of definitions in science publishing. In addition, as much as 61 % deviation in policies (wording and meaning), relative to COPE guidelines, was discovered. When considering the average pooled deviation across all categories of policies, we discovered that there was either no deviation or a small deviation, only in the wording, in the definition of policies when

  9. An unusual accumulation of technetium-99m-sestamibi (99mTc-MIBI) mimicking an ectopic hyperfunctioning parathyroid tissue: usefulness of CT/SPECT technology in a single device

    International Nuclear Information System (INIS)

    Kienast, O.; Traub, T.; Dobrozemsky, G.; Dudczak, R.; Kurtaran, A.; Kletzmayr, J.; Kainberger, F.

    2002-01-01

    Full text: 99mTc-MIBI dual phase scintigraphy is a well established imaging modality in detecting hyperfunctioning parathyroid tissue. The authors report a case of 99mTc-MIBI scintigraphy showing MIBI-accumulation in projection of the upper mediastinum suspicious for hyperfunctioning parathyroid tissue. Further anatomical localization achieved by combined CT/SPECT technology revealed no mediastinal mass. A 71-year-old man with renal transplantation following chronic renal failure experienced hypercalcemia, hyperphosphatemia and elevation of serum parathyroid hormone levels. Ultrasonography of the neck revealed no enlarged parathyroid glands and further diagnostic work-up has been performed. A 99mTc-MIBI dual phase scintigraphy showed no abnormal accumulation in the typical parathyroid region but a focal activity in projection of the upper mediastinum was detected. The SPECT imaging of the neck and upper chest showed the accumulation in anterior location. This finding was interpreted as an ectopic (mediastinal) hyperfunctioning parathyroid tissue. In order to localize the focus, a CT/SPECT study with a single device system (GE Medical Systems Millennium VG gamma camera with Hawkeye) was done. This is an imaging system composed of a low current x-ray tube and a set of detectors mounted onto the camera's slip ring gantry. On registered and fused anatomical/functional images (CT/99mTc-MIBI SPECT), the increased accumulation of 99mTc-MIBI was shown to be an accumulation in the upper sternum. Further radiological examination revealed no abnormality in the sternum. This case illustrates the usefulness of the combined CT/SPECT imaging strategy with a single device in preventing unnecessary diagnostic/therapeutic interventions in patients with hyperthyroidism and abnormal 99mTc-MIBI scintigraphy. (author)

  10. Concepts for the Design of a Diagnostic Device to Detect Malignancies in Human Tissues Final Report CRADA No. TSB-2023-00

    Energy Technology Data Exchange (ETDEWEB)

    DaSilva, L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Marion, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Chase, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-10-19

    BioLuminate, Inc. planned to develop, produce and market a revolutionary diagnostic device for early breast cancer diagnosis. The device was originally invented by NASA; and exclusively licensed to BioLuminate for commercialization. At the time of the CRADA, eighty-five percent (85%) of all biopsies in the United States were found negative each year. The number of biopsies cost the health care system $23 billio n annually. A multi-sensor probe would allow surgeons to improve breast cancer scre ening and significantly reduce the number of biopsies. BioLuminate was developing an in-vivo system for the detection of cancer using a multi-sensor needle/probe. The first system would be developed for the detection of breast cancer. LLNL, in collaboration with BioLuminate worked toward a detailed concept specification for the prototype multi-sensor needle/probe suitable for breast cancer analysis. BioLuminate in collaboration with LLNL, worked to develop a new version of the needle probe that would be the same size as needles commonly used to draw blood.

  11. Evolution of neck vertebral shape and neck retraction at the transition to modern turtles: an integrated geometric morphometric approach.

    Science.gov (United States)

    Werneburg, Ingmar; Wilson, Laura A B; Parr, William C H; Joyce, Walter G

    2015-03-01

    The unique ability of modern turtles to retract their head and neck into the shell through a side-necked (pleurodiran) or hidden-necked (cryptodiran) motion is thought to have evolved independently in crown turtles. The anatomical changes that led to the vertebral shapes of modern turtles, however, are still poorly understood. Here we present comprehensive geometric morphometric analyses that trace turtle vertebral evolution and reconstruct disparity across phylogeny. Disparity of vertebral shape was high at the dawn of turtle evolution and decreased after the modern groups evolved, reflecting a stabilization of morphotypes that correspond to the two retraction modes. Stem turtles, which had a very simple mode of retraction, the lateral head tuck, show increasing flexibility of the neck through evolution towards a pleurodiran-like morphotype. The latter was the precondition for evolving pleurodiran and cryptodiran vertebrae. There is no correlation between the construction of formed articulations in the cervical centra and neck mobility. An increasing mobility between vertebrae, associated with changes in vertebral shape, resulted in a more advanced ability to retract the neck. In this regard, we hypothesize that the lateral tucking retraction of stem turtles was not only the precondition for pleurodiran but also of cryptodiran retraction. For the former, a kink in the middle third of the neck needed to be acquired, whereas for the latter modification was necessary between the eighth cervical vertebra and first thoracic vertebra. Our paper highlights the utility of 3D shape data, analyzed in a phylogenetic framework, to examine the magnitude and mode of evolutionary modifications to vertebral morphology. By reconstructing and visualizing ancestral anatomical shapes, we provide insight into the anatomical features underlying neck retraction mode, which is a salient component of extant turtle classification. © The Author(s) 2014. Published by Oxford University Press

  12. Cancer cells cause vascular endothelial cell (vEC) retraction via 12(S)HETE secretion; the possible role of cancer cell derived microparticle.

    Science.gov (United States)

    Uchide, Keiji; Sakon, Masato; Ariyoshi, Hideo; Nakamori, Syouji; Tokunaga, Masaru; Monden, Morito

    2007-02-01

    Cancer cell mediated vascular endothelial cell (vEC) retraction plays a pivotal role in cancer metastasis. The aim of this study is to clarify the biochemical character of vEC retraction factor derived from human breast cancer cell line, MCF-7. In order to estimate vEC retracting activity, transwell chamber assay system was employed. We first tested the effects of trypsin digestion as well as lipid extraction of culture medium (CM). Trypsin digestion of CM resulted in approximately 40% loss of vEC retracting activity and lipid extraction of CM by Brigh and Dyer methods recovered approximately 60% of vEC retracting activity, suggesting that approximately 60% of vEC retracting activity in MCF-7 derived CM is due to lipid. Although Nordihydroguaiaretic acid (NDGA), the specific lipoxygenase inhibitor, suppressed vEC retracting activity in CM, Acetyl salicylic acid (ASA), a specific cyclooxygenase inhibitor, did not affect the activity, suggesting that lipid exerting vEC retracting activity in CM belongs to lipoxygenase mediated arachidonate metabolites. Thin layer chromatography clearly demonstrated that Rf value of lipid vEC retracting factor in CM is identical to 12HETE. Authentic 12(S)HETE, but not 12(R)HETE, showed vEC retracting activity. After the ultracentrifugation of CM, most lipid vEC retracting activity was recovered from the pellet fraction, and flow cytometric analysis using specific antibody against 12(S)HETE clearly showed the association of 12(S)HETE with small particle in CM. These findings suggested the principal involvement of 12(S)HETE in cancer cell derived microparticles in cancer cell mediated vEC retraction.

  13. Reduced arterial stiffness may contribute to angiotensin-converting enzyme inhibitor induced improvements in walking time in peripheral arterial disease patients: Retraction.

    Science.gov (United States)

    2015-12-01

    J Hypertension 2008, 26:1037–1042. The following authors, Drs A.M. Dart, A. Lawler, P.A. Blombery, Prof. B.A. Kingwell, have requested retraction of a paper by A.A. Ahimastos et al. An investigation by the Research Conduct Office of the Baker Heart and Diabetes Institute found irregularities in a study, including falsification of patients' records and misrepresentation of results, from which this article was derived. On the basis of this investigation the Baker Heart and Diabetes Institute strongly supports retraction and points out the co-authors asking for retraction were found not be involved in the research misconduct. The article is retracted.

  14. Comparative photoelastic study of dental and skeletal anchorages in the canine retraction

    Directory of Open Access Journals (Sweden)

    Cristiane Aparecida de Assis Claro

    2014-01-01

    Full Text Available OBJECTIVE: To compare dental and skeletal anchorages in mandibular canine retraction by means of a stress distribution analysis. METHODS: A photoelastic model was produced from second molar to canine, without the first premolar, and mandibular canine retraction was simulated by a rubber band tied to two types of anchorage: dental anchorage, in the first molar attached to adjacent teeth, and skeletal anchorage with a hook simulating the mini-implant. The forces were applied 10 times and observed in a circular polariscope. The stresses located in the mandibular canine were recorded in 7 regions. The Mann-Whitney test was employed to compare the stress in each region and between both anchorage systems. The stresses in the mandibular canine periradicular regions were compared by the Kruskal-Wallis test. RESULTS: Stresses were similar in the cervical region and the middle third. In the apical third, the stresses associated with skeletal anchorage were higher than the stresses associated with dental anchorage. The results of the Kruskal-Wallis test showed that the highest stresses were identified in the cervical-distal, apical-distal, and apex regions with the use of dental anchorage, and in the apical-distal, apical-mesial, cervical-distal, and apex regions with the use of skeletal anchorage. CONCLUSIONS: The use of skeletal anchorage in canine retraction caused greater stress in the apical third than the use of dental anchorage, which indicates an intrusive component resulting from the direction of the force due to the position of the mini-implant and the bracket hook of the canine.

  15. Model-based identification of motion sensor placement for tracking retraction and elongation of the tongue.

    Science.gov (United States)

    Wang, Yikun K; Nash, Martyn P; Pullan, Andrew J; Kieser, Jules A; Röhrle, Oliver

    2013-04-01

    Electromagnetic articulography (EMA) is designed to track facial and tongue movements. In practice, the EMA sensors for tracking the movement of the tongue's surface are placed heuristically. No recommendation exists. Within this paper, a model-based approach providing a mathematical analysis and a computational-based recommendation for the placement of sensors, which is based on the tongue's envelope of movement, is proposed. For this purpose, an anatomically detailed Finite Element (FE) model of the tongue has been employed to determine the envelope of motion for retraction and elongation using a forward simulation. Two optimality criteria have been proposed to identify a set of optimal sensor locations based on the pre-computed envelope of motion. The first one is based on the assumption that locations exhibiting large displacements contain the most information regarding the tongue's movement and are less susceptible to measurement errors. The second one selects sensors exhibiting each the largest displacements in the anterior-posterior, superior-inferior, medial-lateral and overall direction. The quality of the two optimality criteria is analysed based on their ability to deduce from the respective sensor locations the corresponding muscle activation parameters of the relevant muscle fibre groups during retraction and elongation by solving the corresponding inverse problem. For this purpose, a statistical analysis has been carried out, in which sensor locations for two different modes of deformation have been subjected to typical measurement errors. Then, for tongue retraction and elongation, the expectation value, the standard deviation, the averaged bias and the averaged coefficient of variation have been computed based on 41 different error-afflicted sensor locations. The results show that the first optimality criteria is superior to the second one and that the averaged bias and averaged coefficient of variation decrease when the number of sensors is

  16. [Autogenous tarsus transplant as spacer for treatment of lower lid retraction in Grave's disease].

    Science.gov (United States)

    Schittkowski, M P; Fichter, N; Guthoff, R F

    2008-08-01

    Lower lid retraction in dysthyroid orbitopathy is of less functional concern than optic neuropathy or diplopia in central positions of gaze. However, it may lead to incomplete lid closure resulting in corneal exposure. Patients often suffer from aesthetic impairment. A retrospective analysis of 13 consecutive patients treated for lower lid retraction due to Grave's Disease between 2005 and 2007 was undertaken. In spite of regular ophthalmological examinations, specific attention was directed to measurement of the lid fissure width and scleral show for quantification of lower lid retraction. OPERATION: The lower lid is everted and the conjunctiva is opened horizontally underneath the tarsal edge. Lower lid retractors are disinserted and dissected until the lower lid might be elevated in symmetry to the fellow eye. This procedure is continued until 1 mm overcorrection is gained. A free tarsal transplant is harvested from the ipsilateral upper lid tarsus. At least 4 mm vertical tarsus have to be left. Tarsus is sutured with absorbable material. In the 13 patients operated upon (9 women, 4 men) aged 23 - 67 years, scleral show was preoperative 2.7 mm (mean) and postoperative 0.1 mm. Lid fissure width was preoperative 13 mm (10 - 16 mm) and immediately postoperative 10.3 mm (7 - 13). 6 months postoperative the lid-elevating effect was reduced by 0.5 mm in maximum in the 9 patients available for control. The lid closure deficit, which was present in 7 patients before, could be corrected completely in 5 and diminished to 1 mm in 2 patients. Using this particular technique, functional and aesthetical satisfying results are obtained. The main advantages are renunciation of allogen, xenogeny or synthetic material with its possible risks of slow-virus infection and/or extrusion. Further studies are necessary to evaluate long-term results.

  17. Drosophila motor neuron retraction during metamorphosis is mediated by inputs from TGF-β/BMP signaling and orphan nuclear receptors.

    Directory of Open Access Journals (Sweden)

    Ana Boulanger

    Full Text Available Larval motor neurons remodel during Drosophila neuro-muscular junction dismantling at metamorphosis. In this study, we describe the motor neuron retraction as opposed to degeneration based on the early disappearance of β-Spectrin and the continuing presence of Tubulin. By blocking cell dynamics with a dominant-negative form of Dynamin, we show that phagocytes have a key role in this process. Importantly, we show the presence of peripheral glial cells close to the neuro-muscular junction that retracts before the motor neuron. We show also that in muscle, expression of EcR-B1 encoding the steroid hormone receptor required for postsynaptic dismantling, is under the control of the ftz-f1/Hr39 orphan nuclear receptor pathway but not the TGF-β signaling pathway. In the motor neuron, activation of EcR-B1 expression by the two parallel pathways (TGF-β signaling and nuclear receptor triggers axon retraction. We propose that a signal from a TGF-β family ligand is produced by the dismantling muscle (postsynapse compartment and received by the motor neuron (presynaptic compartment resulting in motor neuron retraction. The requirement of the two pathways in the motor neuron provides a molecular explanation for the instructive role of the postsynapse degradation on motor neuron retraction. This mechanism insures the temporality of the two processes and prevents motor neuron pruning before postsynaptic degradation.

  18. Drosophila motor neuron retraction during metamorphosis is mediated by inputs from TGF-β/BMP signaling and orphan nuclear receptors.

    Science.gov (United States)

    Boulanger, Ana; Farge, Morgane; Ramanoudjame, Christophe; Wharton, Kristi; Dura, Jean-Maurice

    2012-01-01

    Larval motor neurons remodel during Drosophila neuro-muscular junction dismantling at metamorphosis. In this study, we describe the motor neuron retraction as opposed to degeneration based on the early disappearance of β-Spectrin and the continuing presence of Tubulin. By blocking cell dynamics with a dominant-negative form of Dynamin, we show that phagocytes have a key role in this process. Importantly, we show the presence of peripheral glial cells close to the neuro-muscular junction that retracts before the motor neuron. We show also that in muscle, expression of EcR-B1 encoding the steroid hormone receptor required for postsynaptic dismantling, is under the control of the ftz-f1/Hr39 orphan nuclear receptor pathway but not the TGF-β signaling pathway. In the motor neuron, activation of EcR-B1 expression by the two parallel pathways (TGF-β signaling and nuclear receptor) triggers axon retraction. We propose that a signal from a TGF-β family ligand is produced by the dismantling muscle (postsynapse compartment) and received by the motor neuron (presynaptic compartment) resulting in motor neuron retraction. The requirement of the two pathways in the motor neuron provides a molecular explanation for the instructive role of the postsynapse degradation on motor neuron retraction. This mechanism insures the temporality of the two processes and prevents motor neuron pruning before postsynaptic degradation.

  19. Is An Ostomy Rod Useful for Bridging the Retraction During the Creation of a Loop Ileostomy? A Randomized Control Trial.

    Science.gov (United States)

    Uchino, Motoi; Ikeuchi, Hiroki; Bando, Toshihiro; Chohno, Teruhiro; Sasaki, Hirofumi; Horio, Yuki

    2017-08-01

    A loop ileostomy is generally created during restorative proctocolectomy (RPC) for treating ulcerative colitis (UC), and an ostomy rod is often used to prevent stoma retraction. However, its usefulness or harmfulness has not been proven. We performed a prospective randomized control study to investigate the non-inferiority of ostomy creation without a rod to prevent stoma retraction. Patients with UC who underwent RPC were enrolled and randomly divided into groups either with or without ostomy rod use. Incidences of stoma retraction and dermatitis were compared. Of the 320 patients in the study groups, 308 qualified for the intention-to-treat (ITT) analysis, and 257 were included in the per-protocol (PP) analysis. Ostomy retraction was recognized in 6 patients, 3 with a rod and 3 without. The difference with rod use (95% confidence interval) was 0.1 (-2.9 to 3.1)% in the PP analysis and 0.0 (-2.2 to 2.2)% in the ITT analysis. There were no significant differences in stoma retraction regardless of whether an ostomy rod was used in either analysis. Dermatitis was more common in patients with rod use (84/154) than in those without (40/154) (p ostomy rod is not routinely needed as it may increase the risk of dermatitis. However, results in obese patients may differ from those shown here, which should be clarified via further studies.

  20. Effect of botulinum toxin for eyelid retraction in dysthyroid ophthalmopathy as related to hypertrophy of intraorbital muscles

    International Nuclear Information System (INIS)

    Komoto, Noriko; Kozaki, Ai; Yu, Fumihiko; Inoue, Rishu; Maeda, Toshine; Inoue, Toyoko; Inoue, Yoichi

    2007-01-01

    The purpose of this study was to report the effect of botulinum toxin for eyelid retraction in dysthyroid ophthalmopathy with or without hypertrophy of intraorbital muscles. We reviewed 28 eyes of 23 cases who received injection of botulinum toxin for eyelid retraction. Eyelid retraction improved in 23 eyes (82%). The height of palpebral fissure ranged from 8 to 12 mm, average 10.8 mm, before treatment. It ranged from 5 to 12 mm, average 9.4 mm, 2 weeks after treatment. The difference was significant. By magnetic resonance imaging (MRI), hypertrophy of levator and/or superior rectus muscle was present in 19 eyes and absent in 9 eyes. Eyelid retraction improved in 2 eyes (11%) in the former group and in one eye (11%) in the latter. Dalrymple sign was present in 28 eyes before and disappeared in 14 eyes after treatment. Graefe sign was present in 28 eyes before and disappeared in one eye after treatment. Botulinum toxin is effective for eyelid retraction and not for Graefe sign in dysthyroid ophthalmopathy. (author)

  1. RETRACTED: Can sugammadex improve the reversal profile of Atracurium under Sevoflurane anesthesia?

    Directory of Open Access Journals (Sweden)

    Heba Ismail Ahmed Nagy

    2014-01-01

    Shortly after publishing the paper “Can sugammadex improve the reversal profile of atracurium under sevoflurane anesthesia?” in Egyptian Journal of Anaesthesia, DOI: http://dx.doi.org/10.1016/j.egja.2013.09.007, the journal received a request from the ethics committee of the Department of Anesthesiology, Faculty of Medicine, Cairo University, Egypt, for withdrawing the paper, claiming that they had found that the authors made changes in the protocol they had submitted to the committee. After investigating this with the authors, they affirmed that they had made some changes. For this reason, this article has been retracted.

  2. Retracted article: Flexible Fourier Stationary Test in GDP per capita for Central Eastern European Countries

    Directory of Open Access Journals (Sweden)

    Meng-Nan Zhu

    2011-06-01

    Full Text Available Statement of Retraction (http://www.efri.uniri.hr/prikaz.asp?txt_id=7366 This is to notify our respectful reading public that the Editorial Board of the journal Zbornik radova Ekonomskog fakulteta u Rijeci, časopis za ekonomsku teoriju i praksu/ Proceedings of Rijeka Faculty of Economics, Journal of Economics and Business has retracted the following article from publication: “Flexible Fourier Stationary Test in GDP per capita for Central Eastern European Countries“, by Hsu-Ling Chang, Chi-Wei Su, Meng-Nan Zhu, published in our journal Zbornik radova Ekonomskog fakulteta u Rijeci, časopis za ekonomsku teoriju i praksu/ Proceedings of Rijeka Faculty of Economics, Journal of Economics and Business, 2011, vol. 29 (1, pp. 51-63 and almost concurrently published in the journal Eastern European Economics, 2011, vol. 49 (3, pp. 54-65. Being in contact with Josef C Brada, Professor Emeritus, Editor of the journal Eastern European Economics (EEE, we realized that the paper had been sent to both journals, although first published in the EEE and then in our Journal. According to professor Brada’s and our analysis, the paper published in these two journals is exactly the same, except for minor differences in wording, most likely due to editing the text before publication. The outstanding differences are in the title and the fact that the paper published in our Journal has three authors and in EEE journal has two. Whatsoever, owing to the fact that the article had been sent to both journals almost at the same time, it had been impossible to find out the case during the review procedure. Due to this unpleasant situation, our Editorial Board would like to inform our valuable readers that all the necessary measures to retract the paper from our publication have been undertaken and according to publishing ethical principles, cooperation with the authors of the retracted paper have been stopped. Although, in this case neither EEE nor our Journal had any

  3. The mechanics of buccal canine retraction springs for removable orthodontic appliances.

    Science.gov (United States)

    Waters, N E

    1982-07-01

    The force-displacement characteristics of three types of buccal-canine retraction spring to both horizontal (normal) and vertical displacements is derived from simple beam theory. The analyses are used to examine theoretically the effect of variations in the geometry of a given type of spring and also to compare the merits of three designs in terms of the force applied on activation, and their stability to vertical displacement. Experimental measurements on enlarged models of the force-displacement behaviour were in good agreement with the values predicted by the derived equations.

  4. Crash in Publication Ethics in 2016 in a Glance: Avoid Paper Retraction

    Directory of Open Access Journals (Sweden)

    Mohammad H. Ebrahimzadeh

    2017-01-01

    Full Text Available On November 1st  2016, Springer Nature announced that Springer and BioMed Central are retracting 58 articles published by Iran-based authors across seven journals. The decision was made after thorough investigation following receiving allegations of plagiarism, peer review, and authorship manipulation in an effort to mislead the review system (1, 2. Not all papers were involved with all of the above issues, but each showed the evidence of at least one of these issues. At this time, we are not able to comment on the involvement of each individual author, but this has already added a black sheath to his or her records....

  5. Retractable Contracts

    Directory of Open Access Journals (Sweden)

    Franco Barbanera

    2016-02-01

    Full Text Available In calculi for modelling communication protocols, internal and external choices play dual roles. Two external choices can be viewed naturally as dual too, as they represent an agreement between the communicating parties. If the interaction fails, the past agreements are good candidates as points where to roll back, in order to take a different agreement. We propose a variant of contracts with synchronous rollbacks to agreement points in case of deadlock. The new calculus is equipped with a compliance relation which is shown to be decidable.

  6. Notice: PSPB articles by authors with retracted articles at PSPB or other journals: Stapel, Smeesters, and Sanna.

    Science.gov (United States)

    Funder, David

    2014-01-01

    Numerous articles by the social psychologists Diederick Stapel, Dirk Smeesters, and Lawrence Sanna have been retracted in several different journals. The present notice reports the results of an investigation into papers authored or coauthored by these individuals, and published in Personality and Social Psychology Bulletin, that have not been retracted. The status of these papers range from data confirmed as legitimate by coauthors to, in many cases, being unknown as to their legitimacy. Given the lack of information in the latter cases, there is insufficient basis to recommend retraction at this time. Researchers using the results of these papers in their own work are advised to take the information reported in this notice into account.

  7. Retracted: Aetiology and clinical profile of children with 46, XY differences of sex development at an Indian referral centre.

    Science.gov (United States)

    Chauhan, V; Dada, R; Jain, V

    2017-11-01

    Retraction: 'Aetiology and clinical profile of children with 46, XY differences of sex development at an Indian referral centre' by Vasundhera Chauhan, Rima Dada, Vandana Jain The above article, published online on 8 August 2016 in Wiley Online Library (http://wileyonlinelibrary.com), has been retracted by agreement between the authors, the Journal Editors-in-Chief, Wolf-Bernhard Schill and Ralf Henkel, and Blackwell Verlag GmbH. The retraction has been agreed as the result of an unresolved dispute between the first author and a colleague research fellow due to the inclusion of data from patients who were simultaneously enrolled in two studies being conducted separately by the two parties. Reference Chauhan, V., Dada, R. and Jain, V. (2016), Aetiology and clinical profile of children with 46, XY differences of sex development at an Indian referral centre. Andrologia. doi:10.1111/and.12663. © 2016 Blackwell Verlag GmbH.

  8. Osseous outgrowth on the buccal maxilla associated with piezosurgery-assisted en-masse retraction: A case series.

    Science.gov (United States)

    Tunçer, Nilüfer İrem; Arman-Özçırpıcı, Ayça; Oduncuoğlu, Bahar Füsun; Kantarcı, Alpdoğan

    2018-01-01

    Piezoelectric surgery is a novel surgical approach used in orthodontic treatment for rapid tooth movement. This paper presents a case series wherein osseous outgrowths were observed in response to piezosurgery-assisted en-masse retraction. Sixteen patients requiring upper premolar extractions were treated with miniscrew-supported en-masse retraction and received minimally invasive decortication via piezosurgery. Computed tomography (CT) of the maxillary anterior region was performed to investigate the nature of the outgrowths. In 8 of the 16 patients, hemispheric or disc-shaped osseous outgrowths were observed on the sites where piezosurgery was performed during retraction. CT images revealed that these outgrowths were alveolar bone. This case series presents a previously unreported osseous response to piezosurgery-assisted tooth movement during orthodontic treatment. The response is mostly transient and is observed in 50% of the treated patients, suggesting a bone turnover that can be assessed clinically and radiographically.

  9. Evaluating the effects of consolidation on intrusion and retraction using temporary anchorage devices—a FEM study

    Directory of Open Access Journals (Sweden)

    Monica Namburi

    2017-01-01

    Full Text Available Abstract Background Extraction of premolars and retracting the anterior teeth using mini-implants and anterior retraction hooks became advent now a day. In such treatments, consolidation of arches is not done in regular practice. So, the present study is concentrated on effects of consolidation in two implant and three implant combinations of retraction and intrusion. Methods A three-dimensional FEM model of maxillary teeth and periodontal ligament housed in the alveolar bone with the first premolars extracted is generated with appropriate number of elements and nodes. The models were broadly divided into two groups according to the no. of implants. Mini-implants were placed bilaterally between the second premolar and molar at varying heights (7, 10, 13 mm in group I, and along with bilateral implants, an additional mid-implant is placed between the central incisors as group II. Brackets with 0.022 slot were placed on the teeth, 19 × 25 SS wire is placed in the brackets, an anterior retraction hook was placed at 9 mm height, and analysis was done to evaluate the stresses and displacement patterns in consolidation and non-consolidation models. Results The results showed that consolidation of the anterior teeth during intrusion and retraction shows various advantages such as less stresses on the bone, PDL, implant, teeth, and no labial flaring of the anterior teeth and three implant system, i.e., two bilateral implant at 10 mm and a mid-implant at 12 mm between the centrals has shown to be better than other models as bodily movement is observed. Conclusion Consolidation is better than non consolidation during enmasse retraction and intrusion.

  10. RETRACTED: Adaptive neuro-fuzzy prediction of modulation transfer function of optical lens system

    Science.gov (United States)

    Petković, Dalibor; Shamshirband, Shahaboddin; Anuar, Nor Badrul; Md Nasir, Mohd Hairul Nizam; Pavlović, Nenad T.; Akib, Shatirah

    2014-07-01

    This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Editor. Sections ;1. Introduction; and ;2. Modulation transfer function;, as well as Figures 1-3, plagiarize the article published by N. Gül and M. Efe in Turk J Elec Eng & Comp Sci 18 (2010) 71 (http://journals.tubitak.gov.tr/elektrik/issues/elk-10-18-1/elk-18-1-6-0811-9.pdf). Sections ;4. Adaptive neuro-fuzzy inference system; and ;6. Conclusion; duplicate parts of the articles previously published by the corresponding author et al in ;Expert Systems with Applications; 39 (2012) 13295-13304, http://dx.doi.org/10.1016/j.eswa.2012.05.072 and ;Expert Systems with Applications; 40 (2013) 281-286, http://dx.doi.org/10.1016/j.eswa.2012.07.076. One of the conditions of submission of a paper for publication is that authors declare explicitly that the paper is not under consideration for publication elsewhere. Re-use of any data should be appropriately cited. As such this article represents an abuse of the scientific publishing system. The scientific community takes a very strong view on this matter and apologies are offered to readers of the journal that this was not detected during the submission process.

  11. Retracted: Molecular Characterization and Biological Activity of Interferon-α in Indian Peafowl (Pavo cristatus).

    Science.gov (United States)

    Zhao, Hongjing; Wang, Yu; Liu, Juanjuan; Shao, Yizhi; Li, Jinglun; Chai, Hongliang; Xing, Mingwei

    2017-08-07

    DNA and Cell Biology (DNA&CB) is officially retracting the paper by Zhao H, Wang Y, Liu J, Shao Y, Li J, Chai H, Xing M, entitled, "Molecular Characterization and Biological activity of Interferon-α in Indian Peafowl (Pavo cristatus)," [Epub ahead of print]; 2017, DOI: 10.1089/dna.2017.3798. The Editor-in-Chief of DNA&CB, Dr. Carol Shoshkes Reiss, was alerted to a discrepancy between the findings in the article by Zhao et al., and those of others, about the absence of expression of ISG15 in chickens. Dr. Reiss requested from the authors a clarification in their observations and inquired about the failure to include relevant citations in the reference section of the paper. Based on the response from the authors, it appeared that they did not have the confidence in the data as they were not able to repeat the experiments, and were also unsure of the molecular probes that were used in the study. Therefore, the Editor has determined that the paper should be officially retracted from DNA and Cell Biology.

  12. NUMERICAL SIMULATIONS OF PLASMA DYNAMICS IN THE VICINITY OF A RETRACTING FLUX TUBE

    Energy Technology Data Exchange (ETDEWEB)

    Scott, Roger B.; Longcope, Dana W.; McKenzie, David E. [Montana State University P.O. Box 173840 Bozeman, MT 59717-3840 (United States)

    2016-11-01

    In a previous paper, we presented an analytical, zero- β model for supra-arcade downflows in which a retracting flux tube deforms the surrounding magnetic field, constricting the flow of plasma along affected field lines and, in some cases, forcing the plasma to exhibit collimated shocks. Here we present a numerical simulation based on the same model construction—a retracting flux tube is treated as a rigid boundary around which the plasma is forced to flow and the magnetic field and plasma evolve according to the governing equations of magnetohydrodynamics. We find that the collimated shocks described in our previous study are recovered for plasma β in the range of 0 ≤ β ≲ 1, while for 1 ≲ β the behavior is similar to the simpler hydrodynamic case, with classical bow shocks forming when the acoustic Mach number approaches or exceeds unity. Furthermore, we find that while the plasma β is important for identifying the various types of behaviors, more important still is the Alfvén Mach number, which, if large, implies that the bulk kinetic energy of the fluid exceeds the internal energy of the magnetic field, thereby leading to the formation of unconfined, fast-mode magnetosonic shocks, even in the limit of small β .

  13. RETRACTED: New results on structure of low beta confinement Polywell cusps simulated by comsol multiphysics

    Directory of Open Access Journals (Sweden)

    B. Mahdavipour

    Full Text Available This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/about/our-business/policies/article-withdrawal.This article has been retracted at the request of the Editors-in-Chief.After a thorough investigation, the Editors have concluded that the acceptance of this article was based upon the positive advice of at least two illegitimate reviewer reports. The reports were submitted from email accounts which were provided to the journal as suggested reviewers during the submission of the article. Although purportedly real reviewer accounts, the Editors have concluded that these were not of appropriate, independent reviewers.This manipulation of the peer-review process represents a clear violation of the fundamentals of peer review, our publishing policies, and publishing ethics standards. Apologies are offered to the reviewers whose identities were assumed and to the readers of the journal that this deception was not detected during the submission process.Further, the corresponding author was not able to explain the reason for adding the author name B. Mahdavipour to the revised article.

  14. RETRACTED: Results on plasma temperature measurement using an image processing technique

    Directory of Open Access Journals (Sweden)

    B. Mahdavipour

    Full Text Available This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/about/our-business/policies/article-withdrawal.This article has been retracted at the request of the Editors-in-Chief.After a thorough investigation, the Editors have concluded that the acceptance of this article was based upon the positive advice of at least one illegitimate reviewer report. The report was submitted from an email account which was provided to the journal as a suggested reviewer during the submission of the article. Although purportedly a real reviewer account, the Editors have concluded that this was not of an appropriate, independent reviewer.This manipulation of the peer-review process represents a clear violation of the fundamentals of peer review, our publishing policies, and publishing ethics standards. Apologies are offered to the reviewers whose identities were assumed and to the readers of the journal that this deception was not detected during the submission process.In addition, the corresponding author was not able to explain the reason for adding the author names B. Mahdavipour and A. Hatami to the article upon revision.

  15. RETRACTED: Application of RF magnetron sputtering for growth of AZO on glass substrate

    Science.gov (United States)

    Ghorannevis, Z.; Akbarnejad, E.; Salar Elahi, A.; Ghoranneviss, M.

    2016-08-01

    This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Principal Editor. After a thorough investigation, the Editor has concluded that the review process for this article was compromised. The acceptance was based on information from at least one reviewer report that was submitted from an email account provided to the journal as a suggested reviewer during the submission of the article. Although purportedly a real reviewer account, the Editor has concluded that this was not of an appropriate, independent reviewer. This manipulation of the peer-review process represents a clear violation of the fundamentals of peer review, our publishing policies, and publishing ethics standards. Apologies are offered to the reviewers whose identities were assumed and to the readers of the journal that this deception was not detected during the submission process. In addition, the author names Z. Ghorannevis and E. Akbarnejad were added to the article at revision - the corresponding author was not able to explain the reason.

  16. Effect of intrusive and retraction forces in labial and lingual orthodontics: A finite element study

    Directory of Open Access Journals (Sweden)

    Rohan Mascarenhas

    2014-01-01

    Full Text Available Objectives: Lingual orthodontics differs in biomechanics as compared to labial system and has biomechanical advantages. Although theoretical approaches have explained the differences between labial and lingual orthodontics, the finite element method (FEM may be better suited to analyze these differences. This study analyzes the effect of vertical and horizontal forces together on the tooth using FEM. Materials and Methods: An extracted right maxillary central incisor was radiographed and was used to create a solid model using ANSYS. The geometric model was converted into a finite element model with the help of ANSYS software. The model consists of 27,000 elements and 30,000 nodes. Two force vectors (vertical and horizontal were applied labially and lingually at 3 different heights- 4 mm, 5 mm and 6 mm from the incisal edge. Results: In the labial system, the net force vector passes through the center of resistance (CR and brings about intrusion. The net force vector in lingual orthodontics does not pass through the center of resistance and produces lingual tipping of the incisors. Conclusion: Intrusion and retraction forces bring about tipping of incisors in lingual orthodontics. The same amount of intrusion and retraction forces brings about intrusion of incisors in labial orthodontics. Therefore, direction and amount of forces should be carefully and judiciously applied after taking into consideration the resultant biomechanical differences.

  17. Toxoplasma gondii infection induces dendritic retraction in basolateral amygdala accompanied by reduced corticosterone secretion

    Directory of Open Access Journals (Sweden)

    Rupshi Mitra

    2013-03-01

    Pathological anxiety is thought to reflect a maladaptive state characterized by exaggerated fear. Naturally occurring perturbations that reduce fear can be crucial in the search for new treatments. The protozoan parasite Toxoplasma gondii invades rat brain and removes the fear that rats have of cat odors, a change believed to be parasitic manipulation of host behavior aimed at increasing parasite transmission. It is likely that mechanisms employed by T. gondii can be used as a heuristic tool to understand possible means of fear reduction in clinical settings. Male Long-Evans rats were infected with T. gondii and compared with sham-infected animals 8 weeks after infection. The amount of circulating plasma corticosterone and dendritic arborization of basolateral amygdala principal neurons were quantified. Previous studies have shown that corticosterone, acting within the basolateral amygdala, enhances the fear response to environmental stimuli. Here we show that T. gondii infection causes a dendritic retraction in basolateral amygdala neurons. Such dendritic retraction is accompanied by lower amounts of circulating corticosterone, both at baseline and when induced by an aversive cat odor. The concerted effects of parasitism on two pivotal physiological nodes of the fear response provide an animal model relevant to interactions between stress hormones and amygdalar plasticity.

  18. Erratum: Retraction Note to: Evolution of the Health of Concrete Structures by Electrically Conductive GFRP (Glass Fiber Reinforced Plastic) Composites

    Science.gov (United States)

    Shin, Soon-Gi

    2018-03-01

    This article [1] has been retracted at the request of the Editor-in-Chief. Concerns were raised regarding substantial duplications with previous articles published in other journals in which for some S.-G. Shin is one of the co-authors. After a thorough analysis we conclude that the concerns are valid. The article contains sections that substantially overlap with the following published article [2] (amongst others). S.-G. Shin has not responded to correspondence from the Editor about this retraction.

  19. Tissue irradiator

    International Nuclear Information System (INIS)

    Hungate, F.P.; Riemath, W.F.; Bunnell, L.R.

    1975-01-01

    A tissue irradiator is provided for the in-vivo irradiation of body tissue. The irradiator comprises a radiation source material contained and completely encapsulated within vitreous carbon. An embodiment for use as an in-vivo blood irradiator comprises a cylindrical body having an axial bore therethrough. A radioisotope is contained within a first portion of vitreous carbon cylindrically surrounding the axial bore, and a containment portion of vitreous carbon surrounds the radioisotope containing portion, the two portions of vitreous carbon being integrally formed as a single unit. Connecting means are provided at each end of the cylindrical body to permit connections to blood-carrying vessels and to provide for passage of blood through the bore. In a preferred embodiment, the radioisotope is thulium-170 which is present in the irradiator in the form of thulium oxide. A method of producing the preferred blood irradiator is also provided, whereby nonradioactive thulium-169 is dispersed within a polyfurfuryl alcohol resin which is carbonized and fired to form the integral vitreous carbon body and the device is activated by neutron bombardment of the thulium-169 to produce the beta-emitting thulium-170

  20. Safety lock for radiography exposure device

    International Nuclear Information System (INIS)

    Gaines, T.M.

    1982-01-01

    A safety lock for securing a radiation source in a radiography exposure device is disclosed. The safety lock prevents the inadvertent extension of the radiation source from the exposure device. The exposure devices are used extensively in industry for nondestructive testing of metal materials for defect. Unnecessary exposure of the radiographer or operator occurs not infrequently due to operator's error in believing that the radiation source is secured in the exposure device when, in fact, it is not. The present invention solves this problem of unnecessary exposure by releasingly trapping the radiation source in the shield of the radiography exposure device each time the source is retracted therein so that it is not inadvertently extended therefrom without the operator resetting the safety lock, thereby releasing the radiation source. Further, the safety lock includes an indicator which indicates when the source is trapped in the exposure device and also when it is untrapped. The safety lock is so designed that it does not prevent the return of the source to the trapped, shielded position in the exposure device. Further the safety lock includes a key means for locking the radiation source in the trapped position. The key means cannot be actuated until said radiation source is in said trapped position to further insure the safety lock cannot be inadvertently locked with the source untrapped and thus still extendable from the exposure device

  1. Erratum: Retraction Note to: Effect of Carbon Content on the Electrical Conductivity of Carbon Black-Filled PMC with Various Matrices

    Science.gov (United States)

    Shin, Soon-Gi

    2018-03-01

    The Editor-in-Chief and Editorial Board of Electronic Materials Letters have retracted this article [1] because its contents have been previously published by Miyasaka et al. [2]. The contents of this article are therefore redundant. Author Soon-Gi Shin has not responded to correspondence from the Editor about this retraction.

  2. Retraction: Association between the use of biomass fuels on respiratory health of workers in food catering enterprises in Nairobi Kenya. Pan Afr Med J. 2013 May 6;15:12. doi: 10.11604/pamj.2013.15.12.1831.

    Science.gov (United States)

    2014-01-01

    The editors of the Pan African Medical Journal retract the manuscript above. The manuscript has been the subject of a protracted and unresolved authors dispute. Not all the authors listed in this manuscript consented to the retraction.

  3. An evaluation of sharp safety blood evacuation devices.

    Science.gov (United States)

    Ford, Joanna; Phillips, Peter

    This article describes an evaluation of three sharp safety blood evacuation devices in seven Welsh NHS boards and the Welsh Blood Service. Products consisted of two phlebotomy needles possessing safety shields and one phlebotomy device with wings, tubing and a retractable needle. The device companies provided the devices and appropriate training. Participating healthcare workers used the safety device instead of the conventional device to sample blood during the evaluation period and each type of device was evaluated in random order. Participants filled in a questionnaire for each type of device and then a further questionnaire comparing the two shielded evacuation needles with each other Results showed that responses to all three products were fairly positive, although each device was not liked by everyone who used it. When the two shielded evacuation devices were compared with each other, most users preferred the device with the shield positioned directly above the needle to the device with the shield at the side. However, in laboratory tests, the preferred device produced more fluid splatter than the other shielded device on activation.

  4. Performance of fast-setting impression materials in the reproduction of subgingival tooth surfaces without soft tissue retraction.

    Science.gov (United States)

    Rudolph, Heike; Röhl, Andreas; Walter, Michael H; Luthardt, Ralph G; Quaas, Sebastian

    2014-01-01

    Fast-setting impression materials may be prone to inaccuracies due to accidental divergence from the recommended mixing protocol. This prospective randomized clinical trial aimed to assess three-dimensional (3D) deviations in the reproduction of subgingival tooth surfaces and to determine the effect of either following or purposely diverging from the recommended mixing procedure for a fast-setting addition-curing silicone (AS) and fast-setting polyether (PE). After three impressions each were taken from 96 participants, sawcut gypsum casts were fabricated with a standardized procedure and then optically digitized. Data were assessed with a computer-aided 3D analysis. For AS impressions, multivariate analysis of variance revealed a significant influence of the individual tooth and the degree to which the recommended mixing protocol was violated. For PE impressions, the ambient air temperature and individual tooth showed significant effects, while divergence from the recommended mixing protocol was not of significance. The fast-setting PE material was not affected by changes in the recommended mixing protocol. For the two fast-setting materials examined, no divergences from the recommended mixing protocol of less than 2 minutes led to failures in the reproduction of the subgingival tooth surfaces.

  5. Modeling cell elongation during germ band retraction: cell autonomy versus applied anisotropic stress

    International Nuclear Information System (INIS)

    Lynch, Holley E; Shane Hutson, M; Veldhuis, Jim; Wayne Brodland, G

    2014-01-01

    The morphogenetic process of germ band retraction in Drosophila embryos involves coordinated movements of two epithelial tissues—germ band and amnioserosa. The germ band shortens along its rostral–caudal or head-to-tail axis, widens along its perpendicular dorsal-ventral axis, and uncurls from an initial ‘U’ shape. The amnioserosa mechanically assists this process by pulling on the crook of the U-shaped germ band. The amnioserosa may also provide biochemical signals that drive germ band cells to change shape in a mechanically autonomous fashion. Here, we use a finite-element model to investigate how these two contributions reshape the germ band. We do so by modeling the response to laser-induced wounds in each of the germ band’s spatially distinct segments (T1–T3, A1–A9) during the middle of retraction when segments T1–A3 form the ventral arm of the ‘U’, A4–A7 form its crook, and A8–A9 complete the dorsal arm. We explore these responses under a range of externally applied stresses and internal anisotropy of cell edge tensions—akin to a planar cell polarity that can drive elongation of cells in a direction parallel to the minimum edge tension—and identify regions of parameter space (edge-tension anisotropy versus stress anisotropy) that best match previous experiments for each germ band segment. All but three germ band segments are best fit when the applied stress anisotropy and the edge-tension anisotropy work against one another—i.e., when the isolated effects would elongate cells in perpendicular directions. Segments in the crook of the germ band (A4–A7) have cells that elongate in the direction of maximum external stress, i.e., external stress anisotropy is dominant. In most other segments, the dominant factor is internal edge-tension anisotropy. These results are consistent with models in which the amnioserosa pulls on the crook of the germ band to mechanically assist retraction. In addition, they suggest a mechanical cue for

  6. Retraction notice to: Environmental cadmium and zinc concentrations in liver and kidney of European hare from different Serbian regions, Zoran I. Petrović, Vlado B. Teodorović, Mirjana R. Dimitrijević, Sunčica Z. Borozan, Miloš T. Beuković, Dragica M. Nikolić, Aurelija T. Spirić , [Hem. Ind. 67 (4 593-599 (2013 DOI: 10.2298/HEMIND120815100P

    Directory of Open Access Journals (Sweden)

    Editorial

    2015-01-01

    Full Text Available This article has been retracted at the request of authors. The retraction has been made because the authors admitted that they have done dual submission of the text and drawings from article named "Environmental Cd and Zn Concentrations in Liver and Kidney of European Hare from Different Serbian Regions: Age and Tissue Differences" published in Bull Environ Contam Toxicol (2013 90:203-207 DOI 10.1007/s00128-012-0901-7. One of the conditions of submission of a paper for publication are that authors confirm that their work is entirely originally written, someone else’s data and/or text are appropriately cited or quoted and permission has been obtained for use of copyrighted material from other sources. Therefore, the retracted article represents a serious improperly usage of the scientific publishing system. Apologies are offered to readers of the journal Hem.Ind. that this abuse was not detected during the submission, i.e. peer review process. Link to the retracted article 10.2298/HEMIND120815100P

  7. Retraction Note to: Ultra-High Strength and Ductile Lamellar-Structured Powder Metallurgy Binary Ti-Ta Alloys

    Science.gov (United States)

    Liu, Yong; Xu, Shenghang; Wang, Xin; Li, Kaiyang; Liu, Bin; Wu, Hong; Tang, Huiping

    2018-05-01

    The editors and authors have retracted the article, "Ultra-High Strength and Ductile Lamellar-Structured Powder Metallurgy Binary Ti-Ta Alloys" by Yong Liu, Shenghang Xu, Xin Wang, Kaiyang Li, Bin Liu, Hong Wu, and Huiping Tang (https://doi.org/10.1007/s11837-015-1801-1).

  8. Filopodial retraction force is generated by cortical actin dynamics and controlled by reversible tethering at the tip

    DEFF Research Database (Denmark)

    Bornschlögl, Thomas; Romero, Stéphane; Vestergaard, Christian L.

    2013-01-01

    Filopodia are dynamic, finger-like plasma membrane protrusions that sense the mechanical and chemical surroundings of the cell. Here, we show in epithelial cells that the dynamics of filopodial extension and retraction are determined by the difference between the actin polymerization rate at the ...

  9. Fear extinction deficits following acute stress associate with increased spine density and dendritic retraction in basolateral amygdala neurons.

    Science.gov (United States)

    Maroun, Mouna; Ioannides, Pericles J; Bergman, Krista L; Kavushansky, Alexandra; Holmes, Andrew; Wellman, Cara L

    2013-08-01

    Stress-sensitive psychopathologies such as post-traumatic stress disorder are characterized by deficits in fear extinction and dysfunction of corticolimbic circuits mediating extinction. Chronic stress facilitates fear conditioning, impairs extinction, and produces dendritic proliferation in the basolateral amygdala (BLA), a critical site of plasticity for extinction. Acute stress impairs extinction, alters plasticity in the medial prefrontal cortex-to-BLA circuit, and causes dendritic retraction in the medial prefrontal cortex. Here, we examined extinction learning and basolateral amygdala pyramidal neuron morphology in adult male rats following a single elevated platform stress. Acute stress impaired extinction acquisition and memory, and produced dendritic retraction and increased mushroom spine density in basolateral amygdala neurons in the right hemisphere. Unexpectedly, irrespective of stress, rats that underwent fear and extinction testing showed basolateral amygdala dendritic retraction and altered spine density relative to non-conditioned rats, particularly in the left hemisphere. Thus, extinction deficits produced by acute stress are associated with increased spine density and dendritic retraction in basolateral amygdala pyramidal neurons. Furthermore, the finding that conditioning and extinction as such was sufficient to alter basolateral amygdala morphology and spine density illustrates the sensitivity of basolateral amygdala morphology to behavioral manipulation. These findings may have implications for elucidating the role of the amygdala in the pathophysiology of stress-related disorders. Published 2013. This article is a U.S. Government work and is in the public domain in the USA.

  10. Fear extinction deficits following acute stress associate with increased spine density and dendritic retraction in basolateral amygdala neurons

    Science.gov (United States)

    Maroun, Mouna; Ioannides, Pericles J.; Bergman, Krista L.; Kavushansky, Alexandra; Holmes, Andrew; Wellman, Cara L.

    2013-01-01

    Stress-sensitive psychopathologies such as post-traumatic stress disorder are characterized by deficits in fear extinction and dysfunction of corticolimbic circuits mediating extinction. Chronic stress facilitates fear conditioning, impairs extinction, and produces dendritic proliferation in the basolateral amygdala (BLA), a critical site of plasticity for extinction. Acute stress impairs extinction, alters plasticity in the medial prefrontal cortex-to-BLA circuit, and causes dendritic retraction in the medial prefrontal cortex. Here, we examined extinction learning and basolateral amygdala pyramidal neuron morphology in adult male rats following a single elevated platform stress. Acute stress impaired extinction acquisition and memory, and produced dendritic retraction and increased mushroom spine density in basolateral amygdala neurons in the right hemisphere. Unexpectedly, irrespective of stress, rats that underwent fear and extinction testing showed basolateral amygdala dendritic retraction and altered spine density relative to non-conditioned rats, particularly in the left hemisphere. Thus, extinction deficits produced by acute stress are associated with increased spine density and dendritic retraction in basolateral amygdala pyramidal neurons. Furthermore, the finding that conditioning and extinction as such was sufficient to alter basolateral amygdala morphology and spine density illustrates the sensitivity of basolateral amygdala morphology to behavioral manipulation. These findings may have implications for elucidating the role of the amygdala in the pathophysiology of stress-related disorders. PMID:23714419

  11. Control of anterior segment using an antero-posterior lingual sliding retraction system: a preliminary cone-beam CT study

    Directory of Open Access Journals (Sweden)

    Min Hwang

    2018-01-01

    Full Text Available Abstract Background This study was performed to evaluate the treatment effects of the antero-posterior lingual retractor (APLR, focusing on the 3-dimensional (3D tooth movement of the maxillary anterior teeth and their alveolar bone levels. Methods En masse retraction was performed using either the C-lingual retractor (CLR, C-group, n = 9 or the antero-posterior lingual retractor (APLR, AP-group, n = 8. We evaluated 3D movement of the maxillary anterior teeth and alveolar bone levels, root length of the central incisors, long axes of the maxillary canines, and occlusal plane changes from CBCT images. Results After retraction, the central incisors were more significantly intruded and their root apex was more retracted in the AP-group. The long axis of the canine was well maintained in the AP-group. There were no differences in the steepness of occlusal plane and the incidence of alveolar bone loss or of root resorption during en masse retraction with the two retractors. Conclusions The clockwise bowing effect of the anterior segment was less with the APLR, which prevented unwanted canine movement.

  12. Rotator cuff muscles lose responsiveness to anabolic steroids after tendon tear and musculotendinous retraction: an experimental study in sheep.

    Science.gov (United States)

    Gerber, Christian; Meyer, Dominik C; Von Rechenberg, Brigitte; Hoppeler, Hans; Frigg, Robert; Farshad, Mazda

    2012-11-01

    Long-standing rotator cuff tendon tearing is associated with retraction, loss of work capacity, irreversible fatty infiltration, and atrophy of the rotator cuff muscles. Although continuous musculotendinous relengthening can experimentally restore muscular architecture, restoration of atrophy and fatty infiltration is hitherto impossible. Continuous relengthening with pharmacological stimulation of muscle growth using an anabolic steroid or insulin-like growth factor (IGF) can reverse atrophy and fatty infiltration as well as improve the work capacity of chronically retracted rotator cuff muscles in sheep. Controlled laboratory study. Sixteen weeks after tenotomy of the infraspinatus (ISP) tendon, atrophy and fatty infiltration had developed in the retracted ISP muscle. The musculotendinous unit was continuously relengthened in 14 sheep during 6 weeks: Four sheep were treated without pharmacological stimulation, 4 with intramuscular administration of an anabolic steroid, and 6 with IGF before final repair and rehabilitation (12 weeks). Changes were documented by intraoperative measurements of muscle work capacity, histology, and computed tomography/magnetic resonance imaging. Musculotendinous relengthening by continuous traction resulted in gains of length ranging from 0.7 cm in the IGF group to 1.3 cm in the control group. Fatty infiltration progressed in all groups, and the muscle's cross-sectional area ranged from 71% to 74% of the contralateral side at sacrifice and did not show any differences between groups in weight, volume, histological composition, or work capability of the muscle. The contralateral muscles in the anabolic steroid group, however, showed significantly higher (mean ± standard deviation) muscle work capacity of 10 ± 0.9 N·m than the contralateral muscles of the control group (6.8 ± 2.4 N·m) (P muscle fiber area as well as by an unusual gain in the animals' weight after injection of the anabolic steroid. Subcutaneous continuous

  13. Arm retraction dynamics of entangled star polymers: A forward flux sampling method study

    Science.gov (United States)

    Zhu, Jian; Likhtman, Alexei E.; Wang, Zuowei

    2017-07-01

    The study of dynamics and rheology of well-entangled branched polymers remains a challenge for computer simulations due to the exponentially growing terminal relaxation times of these polymers with increasing molecular weights. We present an efficient simulation algorithm for studying the arm retraction dynamics of entangled star polymers by combining the coarse-grained slip-spring (SS) model with the forward flux sampling (FFS) method. This algorithm is first applied to simulate symmetric star polymers in the absence of constraint release (CR). The reaction coordinate for the FFS method is determined by finding good agreement of the simulation results on the terminal relaxation times of mildly entangled stars with those obtained from direct shooting SS model simulations with the relative difference between them less than 5%. The FFS simulations are then carried out for strongly entangled stars with arm lengths up to 16 entanglements that are far beyond the accessibility of brute force simulations in the non-CR condition. Apart from the terminal relaxation times, the same method can also be applied to generate the relaxation spectra of all entanglements along the arms which are desired for the development of quantitative theories of entangled branched polymers. Furthermore, we propose a numerical route to construct the experimentally measurable relaxation correlation functions by effectively linking the data stored at each interface during the FFS runs. The obtained star arm end-to-end vector relaxation functions Φ (t ) and the stress relaxation function G(t) are found to be in reasonably good agreement with standard SS simulation results in the terminal regime. Finally, we demonstrate that this simulation method can be conveniently extended to study the arm-retraction problem in entangled star polymer melts with CR by modifying the definition of the reaction coordinate, while the computational efficiency will depend on the particular slip-spring or slip

  14. Retração rápida de caninos Rapid canine retraction

    Directory of Open Access Journals (Sweden)

    Paulo Renato Carvalho Ribeiro

    2011-02-01

    Full Text Available INTRODUÇÃO: a retração rápida de caninos por distração do ligamento periodontal é uma técnica de movimentação dentária que permite o fechamento de espaço da extração de primeiros pré-molares em um intervalo de duas ou três semanas, proporcionando uma redução significativa no tempo do tratamento ortodôntico. OBJETIVO: apresentar modificações propostas na técnica cirúrgica original e no posicionamento dos distratores. CONCLUSÕES: a retração rápida de caninos é uma técnica que proporciona uma redução significativa no tempo de tratamento ortodôntico. A modificação na técnica cirúrgica proporcionou maior velocidade e segurança ao ato cirúrgico. O distrator posicionado por palatina, no mínimo, proporcionou a preservação da tábua óssea vestibular e evitou a vestibularização dos caninos.INTRODUCTION: Rapid canine retraction through distraction of the periodontal ligament is a tooth movement technique that allows the closure of first premolar extraction space within a period of two to three weeks while providing significant reduction in orthodontic treatment time. OBJECTIVE: To propose changes in the original surgical technique and in the placement of distractors. CONCLUSIONS: Rapid canine retraction is a technique that provides significant reduction in orthodontic treatment time. Changes in the surgical technique provided greater speed and safety in surgery. As a minimum benefit, when positioned palatally, distractors helped to preserve the buccal bone plate and prevented canine proclination.

  15. The Effect of Using Self-ligating Brackets on Maxillary Canine Retraction: A Split-mouth Design Randomized Controlled Trial.

    Science.gov (United States)

    Hassan, Siba E; Hajeer, Mohammad Y; Alali, Osama H; Kaddah, Ayham S

    2016-06-01

    The results of previous studies about the efficacy of using self-ligating brackets (SLBs) in controlling canine movement during retraction are not in harmony. Therefore, the current study aimed to compare the effects of using new passive SLBs on maxillary canine retraction with sliding mechanics vs conventional ligating brackets (CLBs) tied with metal ligatures. The sample comprised 15 adult patients (4 males, 11 females; 18-24 years) requiring bilateral extraction of maxillary first premolars. Units of randomization are the left or right maxillary canines within the same patient. The two maxillary canines in each patient were randomly assigned to one of the two groups in a simple split-mouth design. The canines in the SLBs group (n = 15) were bracketed with SLBs (Damon Q™), while the canines in the CLBs group (n = 15) were bracketed with conventional brackets (Mini Master Series). Transpalatal bars were used for anchorage. After leveling and alignment, 0.019 × 0.025" stainless steel working archwires were placed. Canines were retracted using a nickel-titanium close-coil springs with a 150 gm force. The amount and rate of maxillary canine retraction, canine rotation, and loss of anchorage were measured on study models collected at the beginning of canine retraction (T0) and 12 weeks later (T1). Differences were analyzed using paired-samples t-tests. The effect differences were statistically significant (p brackets gave better results compared to the CLBs in terms of rate of movement, amount of canine rotation following extraction, and anchorage loss.

  16. Engineering Complex Tissues

    Science.gov (United States)

    MIKOS, ANTONIOS G.; HERRING, SUSAN W.; OCHAREON, PANNEE; ELISSEEFF, JENNIFER; LU, HELEN H.; KANDEL, RITA; SCHOEN, FREDERICK J.; TONER, MEHMET; MOONEY, DAVID; ATALA, ANTHONY; VAN DYKE, MARK E.; KAPLAN, DAVID; VUNJAK-NOVAKOVIC, GORDANA

    2010-01-01

    This article summarizes the views expressed at the third session of the workshop “Tissue Engineering—The Next Generation,” which was devoted to the engineering of complex tissue structures. Antonios Mikos described the engineering of complex oral and craniofacial tissues as a “guided interplay” between biomaterial scaffolds, growth factors, and local cell populations toward the restoration of the original architecture and function of complex tissues. Susan Herring, reviewing osteogenesis and vasculogenesis, explained that the vascular arrangement precedes and dictates the architecture of the new bone, and proposed that engineering of osseous tissues might benefit from preconstruction of an appropriate vasculature. Jennifer Elisseeff explored the formation of complex tissue structures based on the example of stratified cartilage engineered using stem cells and hydrogels. Helen Lu discussed engineering of tissue interfaces, a problem critical for biological fixation of tendons and ligaments, and the development of a new generation of fixation devices. Rita Kandel discussed the challenges related to the re-creation of the cartilage-bone interface, in the context of tissue engineered joint repair. Frederick Schoen emphasized, in the context of heart valve engineering, the need for including the requirements derived from “adult biology” of tissue remodeling and establishing reliable early predictors of success or failure of tissue engineered implants. Mehmet Toner presented a review of biopreservation techniques and stressed that a new breakthrough in this field may be necessary to meet all the needs of tissue engineering. David Mooney described systems providing temporal and spatial regulation of growth factor availability, which may find utility in virtually all tissue engineering and regeneration applications, including directed in vitro and in vivo vascularization of tissues. Anthony Atala offered a clinician’s perspective for functional tissue

  17. Comparative analysis of bacterial decrease by Er:YAG laser radiation and by a tip mounted on a high-rotation device after remove of carious tissue in dentine: study 'in anima mobile'

    International Nuclear Information System (INIS)

    Blay, Claudia Campos

    2001-01-01

    The purpose of this study was to analyze bacterial decrease after removal of carious tissue in dentine by Er:YAG laser, comparing the results with those achieved by using a tip mounted on a high-rotation device. In view of the difficulty of totally eliminating microorganisms from dentine, even after removing all the carious tissue, and since the presence of a smear layer is a proven fact, it would be extremely convenient to eliminate or to achieve better disinfecting of this notoriously contaminated dentine layer, so as to prevent failure of the restoration process in most cases. For this study, we selected 30 pre-molars and molars with caries rated as medium sized and which required restoration treatment. The teeth were divided in two groups, where 15 teeth received conventional treatment (control group - I) and 15 teeth were treated with Er:YAG laser (Kavo Key Laser) (laser group - II). Microbiologic analysis was used in order to determine presence or absence of bacteria. In group I as well as in group II a previous curettage of part of the dentine caries was performed, and the sample was seeded in an Agar culture medium and incubated at 37 deg C for 72 hours, for a quantitative analysis of bacteria colony forming units (c.f.u.) and qualitative bacterial analysis. After this procedure, carious lesions were removed in group I, using a spherical diamond drill mounted on a high rotation tip, followed by cleaning of the cavity with chlorhexidine digluconate at 2%. In group II, an Er:YAG laser emitting a wave length of 2,94 μm, delivering a 250 mJ energy per pulse at a repetition rate of 2 Hz was used for carious tissue removal. Furthermore in group II (laser), the cavity was conditioned by performing a sweeping at all walls of the preparation with the 50/10 fiber (Kavo), in contact mode, using an energy of 60 mJ per pulse at a frequency of 10 Hz. After removing all caries and performing a cleaning operation in both groups, dentine shavings were collected and seeded

  18. Morphometric evaluation of condylar cartilage of growing rats in response to mandibular retractive forces

    Directory of Open Access Journals (Sweden)

    Milena Peixoto Nogueira de Sá

    2013-08-01

    Full Text Available INTRODUCTION: The mandibular condylar surface is made up of four layers, i.e., an external layer composed of dense connective tissue, followed by a layer of undifferentiated cells, hyaline cartilage and bone. Few studies have demonstrated the behavior of the condylar cartilage when the mandible is positioned posteriorly, as in treatments for correcting functional Class III malocclusion. OBJECTIVE: The aim of this study was to assess the morphologic and histological aspects of rat condyles in response to posterior positioning of the mandible. METHODS: Thirty five-week-old male Wistar rats were selected and randomly divided into two groups: A control group (C and an experimental group (E which received devices for inducing mandibular retrusion. The animals were euthanized at time intervals of 7, 21 and 30 days after the experiment had began. For histological analysis, total condylar thickness was measured, including the proliferative, hyaline and hypertrophic layers, as well as each layer separately, totaling 30 measurements for each parameter of each animal. RESULTS: The greatest difference in cartilage thickness was observed in 21 days, although different levels were observed in the other periods. Group E showed an increase of 39.46% in the total layer, reflected by increases in the thickness of the hypertrophic (42.24%, hyaline (46.92% and proliferative (17.70% layers. CONCLUSIONS: Posteriorly repositioning the mandible produced a series of histological and morphological responses in the condyle, suggesting condylar and mandibular adaptation in rats.

  19. Morphometric evaluation of condylar cartilage of growing rats in response to mandibular retractive forces.

    Science.gov (United States)

    de Sá, Milena Peixoto Nogueira; Zanoni, Jacqueline Nelisis; de Salles, Carlos Luiz Fernandes; de Souza, Fabrício Dias; Suga, Uhana Seifert Guimarães; Terada, Raquel Sano Suga

    2013-01-01

    The mandibular condylar surface is made up of four layers, i.e., an external layer composed of dense connective tissue, followed by a layer of undifferentiated cells, hyaline cartilage and bone. Few studies have demonstrated the behavior of the condylar cartilage when the mandible is positioned posteriorly, as in treatments for correcting functional Class III malocclusion. The aim of this study was to assess the morphologic and histological aspects of rat condyles in response to posterior positioning of the mandible. Thirty five-week-old male Wistar rats were selected and randomly divided into two groups: A control group (C) and an experimental group (E) which received devices for inducing mandibular retrusion. The animals were euthanized at time intervals of 7, 21 and 30 days after the experiment had began. For histological analysis, total condylar thickness was measured, including the proliferative, hyaline and hypertrophic layers, as well as each layer separately, totaling 30 measurements for each parameter of each animal. The greatest difference in cartilage thickness was observed in 21 days, although different levels were observed in the other periods. Group E showed an increase of 39.46% in the total layer, reflected by increases in the thickness of the hypertrophic (42.24%), hyaline (46.92%) and proliferative (17.70%) layers. Posteriorly repositioning the mandible produced a series of histological and morphological responses in the condyle, suggesting condylar and mandibular adaptation in rats.

  20. RETRACTED: Association of the ACE I/D gene polymorphism with sepsis susceptibility and sepsis progression.

    Science.gov (United States)

    Yang, Chun-Hua; Zhou, Tian-Biao

    2015-12-01

    This article has been included in a multiple retraction: Chun-Hua Yang and Tian-Biao Zhou Association of the ACE I/D gene polymorphism with sepsis susceptibility and sepsis progression Journal of Renin-Angiotensin-Aldosterone System 1470320314568521, first published on February 3, 2015 doi: 10.1177/1470320314568521 This article has been retracted at the request of the Editors and the Publisher. After conducting a thorough investigation, SAGE found that the submitting authors of a number of papers published in the Journal of the Renin-Angiotensin Aldosterone System ( JRAAS) (listed below) had supplied fabricated contact details for their nominated reviewers. The Editors accepted these papers based on the reports supplied by the individuals using these fake reviewer email accounts. After concluding that the peer review process was therefore seriously compromised, SAGE and the journal Editors have decided to retract all affected articles. Online First articles (these articles will not be published in an issue) Wenzhuang Tang, Tian-Biao Zhou, and Zongpei Jiang Association of the angiotensinogen M235T gene polymorphism with risk of diabetes mellitus developing into diabetic nephropathy Journal of Renin-Angiotensin-Aldosterone System 1470320314563426, first published on December 18, 2014 doi: 10.1177/1470320314563426 Tian-Biao Zhou, Hong-Yan Li, Zong-Pei Jiang, Jia-Fan Zhou, Miao-Fang Huang, and Zhi-Yang Zhou Role of renin-angiotensin-aldosterone system inhibitors in radiation nephropathy Journal of Renin-Angiotensin-Aldosterone System 1470320314563424, first published on December 18, 2014 doi: 10.1177/1470320314563424 Weiqiang Zhong, Zongpei Jiang, and Tian-Biao Zhou Association between the ACE I/D gene polymorphism and T2DN susceptibility: The risk of T2DM developing into T2DN in the Asian population Journal of Renin-Angiotensin-Aldosterone System 1470320314566019, first published on January 26, 2015 doi: 10.1177/1470320314566019 Tian-Biao Zhou, Xue-Feng Guo, Zongpei

  1. Photovoltaic device

    Energy Technology Data Exchange (ETDEWEB)

    Reese, Jason A; Keenihan, James R; Gaston, Ryan S; Kauffmann, Keith L; Langmaid, Joseph A; Lopez, Leonardo; Maak, Kevin D; Mills, Michael E; Ramesh, Narayan; Teli, Samar R

    2017-03-21

    The present invention is premised upon an improved photovoltaic device ("PV device"), more particularly to an improved photovoltaic device with a multilayered photovoltaic cell assembly and a body portion joined at an interface region and including an intermediate layer, at least one interconnecting structural member, relieving feature, unique component geometry, or any combination thereof.

  2. Photovoltaic device

    Science.gov (United States)

    Reese, Jason A.; Keenihan, James R.; Gaston, Ryan S.; Kauffmann, Keith L.; Langmaid, Joseph A.; Lopez, Leonardo C.; Maak, Kevin D.; Mills, Michael E.; Ramesh, Narayan; Teli, Samar R.

    2015-06-02

    The present invention is premised upon an improved photovoltaic device ("PV device"), more particularly to an improved photovoltaic device with a multilayered photovoltaic cell assembly and a body portion joined at an interface region and including an intermediate layer, at least one interconnecting structural member, relieving feature, unique component geometry, or any combination thereof.

  3. Photovoltaic device

    Science.gov (United States)

    Reese, Jason A.; Keenihan, James R.; Gaston, Ryan S.; Kauffmann, Keith L.; Langmaid, Joseph A.; Lopez, Leonardo C.; Maak, Kevin D.; Mills, Michael E.; Ramesh, Narayan; Teli, Samar R.

    2015-09-01

    The present invention is premised upon an improved photovoltaic device ("PV device"), more particularly to an improved photovoltaic device (10) with a multilayered photovoltaic cell assembly (100) and a body portion (200) joined at an interface region (410) and including an intermediate layer (500), at least one interconnecting structural member (1500), relieving feature (2500), unique component geometry, or any combination thereof.

  4. RETRACTED: Green synthesis of zinc oxide nanoparticles using Moringa oleifera leaf extract and evaluation of its antimicrobial activity

    Science.gov (United States)

    Elumalai, K.; Velmurugan, S.; Ravi, S.; Kathiravan, V.; Ashokkumar, S.

    2015-05-01

    This article has been retracted: please see Elsevier Policy on Article Withdrawal. This article has been retracted at the request of the Editor. The article contains the same image in two panels (Fig. 8A and B) which was previously published in "Facile, eco-friendly and template free photosynthesis of cauliflower like ZnO nanoparticles using leaf extract of Tamarindus indica (L.) and its biological evolution of antibacterial and antifungal activities" by K. Elumalai et al. in Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy 136 (2015) 1052-1057, http://dx.doi.org/10.1016/j.saa.2014.09.129 despite being attributed to different nanoparticles. Furthermore, Figures 9C, D and E are the same, despite being indicated as analysis of different microorganisms. The scientific community takes a very strong view on this scientific misbehavior and apologies are offered to readers of the journal that this was not detected during the submission process.

  5. State Administrative Legal Review on the Bill of Retraction Law of Corrupted Assets in Eradication Effort of Corruption in Indonesia

    Directory of Open Access Journals (Sweden)

    Dian Puji Simatupang

    2011-09-01

    Full Text Available Since eradicating corruption having been continously encouraged by late governments – and until now – , there would not be less important as to retracting the corrupted assets. There are many aspects to be considered in doing such action, such as manifesting the legal aspects of administrative law, and so other applied national regulations. By these regulations, such as Law No. 7 of 2006 on Ratification of United Nations Convention against Corruption, 2003 (Konvensi Perserikatan Bangsa Bangsa Anti-Korupsi, 2003, Law Number 25 of 2003 On Amendment to Law Number 15 of 2002 on Money Laundering, Act 30 of 2002 on Corruption Eradication Commission, Law Number 20 Year 2001 regarding Amendment to Law Number 31 Year 1999 on the Eradication of Corruption, and Government Regulation Number 65 of 1999 on Implementation Procedures for Examination of State Property, retraction the corrupted assets should be define in order to get known about eradicating corruption.

  6. RETRACTED: Development of carbon paste electrodes modified by molecularly imprinted polymer as potentiometry sensor of uric acid

    Directory of Open Access Journals (Sweden)

    Miratul Khasanah

    Full Text Available This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy.This article has been retracted at the request of the Editors-in-Chief.After a thorough investigation, the Editors have concluded that the acceptance of this article was based upon the positive advice of two illegitimate reviewer reports. The reports were submitted from email accounts which were provided to the journal as suggested reviewers during the submission of the article. Although purportedly real reviewer accounts, the Editors have concluded that these were not of appropriate, independent reviewers.This manipulation of the peer-review process represents a clear violation of the fundamentals of peer review, our publishing policies, and publishing ethics standards. Apologies are offered to the reviewers whose identities were assumed and to the readers of the journal that this deception was not detected during the submission process.

  7. RETRACTED: Development of electrode carbon paste modified by molecularly imprinted polymer as sensor for analysis of creatinine by potentiometric

    Directory of Open Access Journals (Sweden)

    Miratul Khasanah

    Full Text Available This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy.This article has been retracted at the request of the Editors-in-Chief.After a thorough investigation, the Editors have concluded that the acceptance of this article was based upon the positive advice of two illegitimate reviewer reports. The reports were submitted from email accounts which were provided to the journal as suggested reviewers during the submission of the article. Although purportedly real reviewer accounts, the Editors have concluded that these were not of appropriate, independent reviewers.This manipulation of the peer-review process represents a clear violation of the fundamentals of peer review, our publishing policies, and publishing ethics standards. Apologies are offered to the reviewers whose identities were assumed and to the readers of the journal that this deception was not detected during the submission process.

  8. Competition from newborn granule cells does not drive axonal retraction of silenced old granule cells in the adult hippocampus

    Directory of Open Access Journals (Sweden)

    Carla M Lopez

    2012-11-01

    Full Text Available In the developing nervous system synaptic refinement, typified by the neuromuscular junction where supernumerary connections are eliminated by axon retraction leaving the postsynaptic target innervated by a single dominant input, critically regulates neuronal circuit formation. Whether such competition based pruning continues in established circuits of mature animals remains unknown. This question is particularly relevant in the context of adult neurogenesis where newborn cells must integrate into preexisting circuits, and thus, potentially compete with functionally mature synapses to gain access to their postsynaptic targets. The hippocampus plays an important role in memory formation/retrieval and the dentate gyrus subfield (DG exhibits continued neurogenesis into adulthood. Therefore, this region contains both mature granule cells (old GCs and immature recently born GCs that are generated throughout adult life (young GCs, providing a neurogenic niche model to examine the role of competition in synaptic refinement. Recent work from an independent group in developing animals indicated that embryonically/early postnatal generated GCs placed at a competitive disadvantage by selective expression of tetanus toxin (TeTX to prevent synaptic release rapidly retracted their axons, and that this retraction was driven by competition from newborn GCs lacking TeTX. In contrast, following 3-6 months of selective TeTX expression in old GCs of adult mice we did not observe any evidence of axon retraction. Indeed ultrastructural analyses indicated that the terminals of silenced GCs even maintained synaptic contact with their postsynaptic targets. Furthermore, we did not detect any significant differences in the electrophysiological properties between old GCs in control and TeTX conditions. Thus, our data demonstrate a remarkable stability in the face of a relatively prolonged period of altered synaptic competition between two populations of neurons within the

  9. Disk suspension method: a novel and safe technique for the retraction of the liver during laparoscopic surgery (with video).

    Science.gov (United States)

    Shibao, Kazunori; Higure, Aiichiro; Yamaguchi, Koji

    2011-08-01

    A good operative field is important for safe operations, but it is sometimes difficult to obtain a satisfactory operative field in laparoscopic upper abdominal surgery. We developed a novel and safe technique for the retraction of the liver and falciform ligament during laparoscopic surgery, and evaluated its technical feasibility and safety. Forty-three patients with gastric cancer were divided into two groups: disk suspension group (DS group; snake retractor and elastic band fixation with a silicon disk), and fixed retractor group (FR group; snake retractor and nonelastic band fixation without a silicon disk). To evaluate liver damage during retraction, we measured the aspartate aminotransferase (AST) and alanine aminotransferase (ALT) levels preoperatively and on postoperative day (POD) 1. In the DS group, all liver lobes were adequately retracted and the hepatoduodenal and gastrohepatic ligaments were fully exposed. This procedure took less than 3 min. On the other hand, 5 of 18 patients of the FR group had insufficient surgical fields for laparoscopic gastrectomy because of soft and/or large livers. Although the preoperative AST and ALT levels were not different between the two groups, the DS group did not display increases in both AST and ALT levels, whereas the FR group showed increases in both on POD 1 (AST: 50.2 ± 8.4 IU/l vs. 124.2 ± 37.7 IU/l, P = 0.07; and ALT: 35.6 ± 6.4 IU/l vs. 106.1 ± 36.2 IU/l, P = 0.07). No complications related to the liver retraction were observed in the DS group. However, liver congestion was evident in six patients and minor liver injury in two patients of the FR group during the esophagojejunostomy. The DS method is a simple and safe and provides a better surgical field during laparoscopic surgery of the upper abdomen without damaging the liver.

  10. Retraction: Aydin, B. Statistical Convergent Topological Sequence Entropy Maps of the Circle. Entropy 2004, 6, 257–261

    Directory of Open Access Journals (Sweden)

    Kevin H. Knuth

    2014-02-01

    Full Text Available The editors were made aware that a paper published in Entropy in 2004 [1] may have plagiarized an earlier paper by Roman Hric published in 2000 [2]. After checking with specialized plagiarism software, we found that this claim is indeed correct and almost the entire paper is a verbatim copy of the earlier one. After confirmation of this fact, the editors of Entropy have decided to retract the paper immediately. [...

  11. Retracted: 147 reduced syntaxin-5 in skeletal muscle of patients with type 2 diabetes. A link between lipid storage and insulin resistance.

    Science.gov (United States)

    Andersson, L; Myhre, S; Bostrom, P; Ståhlman, M; Vind, B; Håversen, L; Borén, J; Hojlund, K; Olofsson, S-O

    2011-06-01

    This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This abstract has been retracted at the request of Jan Borén, co-author, because of conscious fabrication, corruption or suppression of basic material and conscious preparation and presentation of falsified results in the abstract by one of the authors. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

  12. 21 CFR 876.5885 - Tissue culture media for human ex vivo tissue and cell culture processing applications.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Tissue culture media for human ex vivo tissue and cell culture processing applications. 876.5885 Section 876.5885 Food and Drugs FOOD AND DRUG... DEVICES Therapeutic Devices § 876.5885 Tissue culture media for human ex vivo tissue and cell culture...

  13. RETRACTED: Growth behavior and microstructure evolution of ZnO nanorods grown on Si in aqueous solution

    Science.gov (United States)

    Liou, Sz-Chian; Hsiao, Chi-Sheng; Chen, San-Yuan

    2005-02-01

    This article has been retracted: please see Elsevier Policy on Article Withdrawal. This article has been retracted at the request of the Editor-in-Chief. Two papers published in the Journal of Crystal Growth are being retracted due to a case of misrepresentation and reuse of data. A reader of the Journal has brought to our attention the reuse of data within two published papers: Growth behavior and microstructure evolution of ZnO nanorods grown on Si in aqueous solution, Sz-Chian Liou, Chi-Sheng Hsiao, San-Yuan Chen, Journal of Crystal Growth 274 (2005) 438-446. Nucleation and growth behavior of well-aligned ZnO nanorods on organic substrates in aqueous solutions, Chin-Ching Lin, San-Yuan Chen, and Syh-Yuh Cheng, Journal of Crystal Growth 283 (2005) 141-146. In these papers the same transmission electron micrograph was used to describe two different experimental situations and results bringing into question the content of these papers. The reuse of data without proper attribution is not acceptable within the scientific publishing community. In the present case, this is compounded by the attribution of the micrograph to a different experimental situation and drawing, as a result, new conclusions from data obtained from different samples. Such behavior undermines the integrity of the scientific publishing endeavor and is not acceptable. The authors are responsible for the content of their papers.

  14. Mechanical Property Analysis in the Retracted Pin-Tool (RPT) Region of Friction Stir Welded (FSW) Aluminum Lithium 2195

    Science.gov (United States)

    Ding, R. Jeffrey; Oelgoetz, Peter A.

    1999-01-01

    The "Auto-Adjustable Pin Tool for Friction Stir Welding", was developed at The Marshall Space Flight Center to address process deficiencies unique to the FSW process. The auto-adjustable pin tool, also called the retractable pin-tool (R.PT) automatically withdraws the welding probe of the pin-tool into the pin-tool's shoulder. The primary function of the auto-adjustable pin-tool is to allow for keyhole closeout, necessary for circumferential welding and localized weld repair, and, automated pin-length adjustment for the welding of tapered material thickness. An overview of the RPT hardware is presented. The paper follows with studies conducted using the RPT. The RPT was used to simulate two capabilities; welding tapered material thickness and closing out the keyhole in a circumferential weld. The retracted pin-tool regions in aluminum- lithium 2195 friction stir weldments were studied through mechanical property testing and metallurgical sectioning. Correlation's can be =de between retractable pin-tool programmed parameters, process parameters, microstructure, and resulting weld quality.

  15. Retraction of the Plunger on a Syringe of Hyaluronic Acid Before Injection: Are We Safe?

    Science.gov (United States)

    Carey, Wayne; Weinkle, Susan

    2015-12-01

    Controversy exists concerning the need for aspiration before injection with hyaluronic acid (HA) fillers. The authors undertook a study of HA products to determine if blood could be aspirated back into a syringe of HA when the needle has been primed or filled with HA. Two studies were set up to determine if or when blood could be withdrawn from a heparinized fresh tube of blood into the HA syringe. Two different techniques were tested; one using a slow-pull retraction of the plunger and up to a 5-second waiting time before release versus a rapid pullback and quick release. Review of these data demonstrates that the usual clinical method, which involves quick withdrawal and instant release of the syringe plunger does not allow for sufficient removal of the filler found intraluminal in the needle and may give rise to false negative results in vitro and likely in vivo with the exception being the Galderma/Medicis products. In summary, withdrawal of the syringe plunger with no visible blood in the syringe does not eliminate the possibility of intravascular placement of the syringe needle.

  16. Retraction of colonies and structures of Aspergillus Spp. as a possible high dose sensor

    International Nuclear Information System (INIS)

    Borges, Valeria B.; Vital, Helio C.; Moraes, Aurea M.L.

    2013-01-01

    Changes in the length of macro-and microscopic structures of irradiated Aspergillus spp. colonies were investigated in this work in search for correlations with radiation dose. Effects related to growth and morphology produced by exposure to radiation doses ranging from 0.0 up to 8.0 kGy on strains of A. flavus (CMT 00079), A. parasiticus (CMT 00064) and A ochraceus (CMT 00145) were analyzed. Fungal colonies were inoculated on fresh peanut seeds and incubated for 5 days at 25°C. On the sixth day the samples were irradiated and moved to Petri dishes containing PDA culture medium where they remained incubated for 7 days at 25°C Post irradiation growth was periodically monitored by visual inspections and measurements of mycelial diameters. In addition, microscopic analyses were performed to determine the length of the major structures of the colonies. It has been found that irradiation causes a decrease in the diameter of colonies as well as in the length of microscopic structures of the fungus. The amount of retraction has been found to be strongly correlated to radiation dose. Such findings hint at the possibility of using in situ Aspergillus spp. colonies as high-dose living dosimeters in the event of massive radiation exposures. (author)

  17. [Laser-assisted lipolysis for gynecomastia: safe and effective skin retraction].

    Science.gov (United States)

    Trelles, Mario; Bonanad, Enrique; Moreno-Moraga, Javier; Alcolea, Justo; Mordon, Serge; Leclère, Franck Marie

    2013-01-01

    To evaluate efficacy of laser lipolysis in the treatment of gynecomastia to correct breast volume, flaccidity and excess skin without its excision. Prospectively, 32 patients with gynecomastia under tumescent anaesthesia and sedation underwent laser lipolysis with 980 nm diode laser, 15W continuous emission and 8 to 12 kJ energy per breast. Externally cold air was used to protect the skin. No drainages were used but a compressive bandage. Patients evaluated results on a VAS scale. Two doctors evaluated results comparing before and 6 month after photographs and also measured the areola and chest diameter. Twenty three patients considered results as Very Good, 7 Good and 2 Fair Cutaneous retraction of the areola was noticeable one month after the surgery and was maximum 6 months after. Evaluation by doctors was 26 Very Good, 5 Good and 1 Fair. There were no burns, ischemia or lesions in areolas or nipples. Laser assisted liposuction is a simple and efficacious technique, barely traumatic and permits a rapid reincorporation to normal activities.

  18. Retraction: Calculation and modeling of the energy released in result of water freezing process (WFP

    Directory of Open Access Journals (Sweden)

    M. Ghodsi Hassanabad

    Full Text Available This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/about/our-business/policies/article-withdrawal.After a thorough investigation, the Editors have concluded that the acceptance of this article was based upon the positive advice of at least one illegitimate reviewer report. The report was submitted from an email account which was provided to the journal as a suggested reviewer during the submission of the article. Although purportedly a real reviewer account, the Editors have concluded that this was not of an appropriate, independent reviewer.This manipulation of the peer-review process represents a clear violation of the fundamentals of peer review, our publishing policies, and publishing ethics standards. Apologies are offered to the reviewers whose identities were assumed and to the readers of the journal that this deception was not detected during the submission process.Further, no reason has been provided for the addition of the author names M. Ghodsi Hassanabad and A. Dehghani Mehrbadi to the authorship of the revised article.

  19. A Clinical Assessment of Corticotomy Facilitated Orthodontics in the Retraction of Maxillary Anterior Segment

    Directory of Open Access Journals (Sweden)

    Chagam Manjunatha Reddy

    2014-01-01

    Full Text Available Corticotomy facilitated orthodontics has been practising for longer periods, but a novel approach of a periapical incision to make horizontal cuts 5 mm above the apex of the maxillary anteriors along with vertical cuts requires a detailed investigation. The purpose of this study was to assess the outcome of skeletal cases with spacing in the anteriors using a novel method of modified surgical approach utilizing the corticotomy facilitated orthodontics. Patients for this study were randomly selected from a very intensive screening in the Department of Orthodontics, Saveetha Dental College and Hospital, Chennai, out of which seven patients were selected for this procedure. The patients were subjected for corticotomy procedure under local anesthesia after the leveling and aligning stage (0.019" × 0.025" stainless steel wire, and the retraction was continued still the space was closed. AutoCAD and palatal rugae assessment programs were used to assess the orthodontic tooth movement. The results of the study demonstrated that when compared to conventional orthodontics alone, the corticotomy facilitated approach produced faster tooth movements in all the seven patients reducing the overall treatment time by 60%. The use of this modified technique of labial, palatal and apical cuts could be beneficial for adult patients with difficult surgical access from the lingual side.

  20. Outcomes in patients with esotropic duane retraction syndrome and a partially accommodative component

    Directory of Open Access Journals (Sweden)

    Ramesh Kekunnaya

    2013-01-01

    Full Text Available Background: The management of Duane retraction syndrome (DRS is challenging and may become more difficult if an associated accommodative component due to high hyperopia is present. The purpose of this study is to review clinical features and outcomes in patients with partially accommodative esotropia and DRS. Setting and Design: Retrospective, non-comparative case series. Materials and Methods: Six cases of DRS with high hyperopia were reviewed. Results: Of the patients studied, the mean age of presentation was 1.3 years (range: 0.5-2.5 years. The mean amount of hyperopia was + 5D (range: 3.50-8.50 in both eyes. The mean follow up period was 7 years (range: 4 months-12 years. Five cases were unilateral while one was bilateral. Four cases underwent vertical rectus muscle transposition (VRT and one had medial rectus recession prior to presentation; all were given optical correction. Two (50% of the four patients who underwent vertical rectus transposition cases developed consecutive exotropia, one of whom did not have spectacles prescribed pre-operatively. All other cases (four had minimal residual esotropia and face turn at the last follow-up with spectacle correction. Conclusion: Patients with Duane syndrome can have an accommodative component to their esotropia, which is crucial to detect and correct prior to surgery to decrease the risk of long-term over-correction. Occasionally, torticollis in Duane syndrome can be satisfactorily corrected with spectacles alone.

  1. Non-surgical treatment for eyelid retraction in thyroid eye disease (TED).

    Science.gov (United States)

    Grisolia, Ana Beatriz Diniz; Couso, Ricardo Christopher; Matayoshi, Suzana; Douglas, Raymond S; Briceño, César Augusto

    2017-08-09

    Thyroid eye disease (TED) is an autoimmune condition with an unpredictable course that may lead to permanent facial disfigurement. Eyelid retraction is one of the most common findings, and frequently demands attention due to ocular exposure and impaired cosmesis. Surgical treatment remains the most effective option, but there is a role for temporary corrections during the active phase of the disease, as well as in patients who are poor surgical candidates. The aim of this review is to describe the non-surgical modalities currently available for treatment of eyelid malposition in TED. The authors have focused on the use of hyaluronic acid, triamcinolone injections and botulinum toxin type A as non-surgical treatment alternatives, paying special attention to dosing, technique, efficacy and duration of effect. Non-surgical treatment modalities may represent viable in cases where surgical correction is not an option. Although temporary, these modalities appear to be beneficial for ocular exposure remediation, improving quality of life and broadening our therapeutic arsenal. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  2. Retraction Note to: “Global Assessment in the World Bank Education Strategy 2020”

    Directory of Open Access Journals (Sweden)

    Christopher S. Collins

    2016-10-01

    Full Text Available This article published in Volume 2, Issue 1, pages 29-41 (DOI 10.5195/ehe.2011.41 has been retracted at the request of the editors. The editors became aware of the issue on 21 March 2016 and quickly began investigating the situation. Several locations in the article contain plagiarized texts from various authors, either with inadequate or no attribution. Specifically, these include: excerpts from Marilee J. Bresciani’s 2006 book Outcomes-Based Academic and Co-Curricular Program Review: A Compilation of Institutional Practices appearing on page 30; excerpts from Tom Schuller and Stéphan Vincent-Lancrin’s chapter in the 2009 book International Organizations and Higher Education Policy: Thinking Globally, Acting Locally? appearing on page 31; excerpts from the Organisation for Economic Co-operation and Development (OECD website “UNESCO, OECD guidelines for quality provision in cross-border higher education” appearing on page 31; excerpts from David H. Kamens and Connie L. McNeely’s 2010 article, “Globalization and the Growth of International Education Testing and National Assessment” published in the Comparative Education Review appearing on page 31, and; excerpts from E. J. K. McKellar’s conference paper “Change our assessment practices? Why should we? The theory behind assessment practices” appearing on pages 32-33. The author apologizes to the journal and to its readers for the errors noted above.

  3. Val66Met polymorphism of BDNF alters prodomain structure to induce neuronal growth cone retraction.

    Science.gov (United States)

    Anastasia, Agustin; Deinhardt, Katrin; Chao, Moses V; Will, Nathan E; Irmady, Krithi; Lee, Francis S; Hempstead, Barbara L; Bracken, Clay

    2013-01-01

    A common single-nucleotide polymorphism (SNP) in the human brain-derived neurotrophic factor (BDNF) gene results in a Val66Met substitution in the BDNF prodomain region. This SNP is associated with alterations in memory and with enhanced risk to develop depression and anxiety disorders in humans. Here we show that the isolated BDNF prodomain is detected in the hippocampus and that it can be secreted from neurons in an activity-dependent manner. Using nuclear magnetic resonance spectroscopy and circular dichroism, we find that the prodomain is intrinsically disordered, and the Val66Met substitution induces structural changes. Surprisingly, application of Met66 (but not Val66) BDNF prodomain induces acute growth cone retraction and a decrease in Rac activity in hippocampal neurons. Expression of p75(NTR) and differential engagement of the Met66 prodomain to the SorCS2 receptor are required for this effect. These results identify the Met66 prodomain as a new active ligand, which modulates neuronal morphology.

  4. Comparison of rate of En masse retraction and anchorage loss in conventional labial appliance with labial and lingual force: A clinical study

    Directory of Open Access Journals (Sweden)

    Dilshad Quraishi

    2018-01-01

    Full Text Available Aims: The rate of en masse retraction and anchorage loss were compared between labial appliance with lingual force and conventional labial appliance. Subjects and Methods: The sample consists of 14 patients and they were divided into two groups. In Group 1 – labial appliance with lingual force, elastomeric chain was placed from the palatal surface of the canines to the palatal surface of the molars. In Group 2 – labial appliance with labial force, elastomeric chain was placed from the crimpable hook distal to lateral incisor to the molar tube hooks. The rate of en masse retraction and anchorage loss was calculated for both the groups during retraction in dental casts (R0, initial; R1, 4 weeks; R2, 8 weeks; and R3, 12 weeks. Statistical Analysis Used: Student's paired t-test. Results: The rate of retraction was faster and anchorage loss was lower with labial appliance with lingual force, i.e., Group 1. The difference of anchorage loss in Group 1 and Group 2 shows t = 4.824 and P value= 0.000, which is statistically highly significant. The difference of rate of retraction in Group 1 and Group 2 shows t = 3.573 and P value = 0.004, which is statistically signifcant. Conclusions: The rate of retraction was faster and anchorage loss was lower with labial appliance with lingual force, thus indicating that this new technique of space closure utilizes biomechanical advantage of lingual force in conventional labial appliance.

  5. Astrocytic αVβ3 integrin inhibits neurite outgrowth and promotes retraction of neuronal processes by clustering Thy-1.

    Directory of Open Access Journals (Sweden)

    Rodrigo Herrera-Molina

    Full Text Available Thy-1 is a membrane glycoprotein suggested to stabilize or inhibit growth of neuronal processes. However, its precise function has remained obscure, because its endogenous ligand is unknown. We previously showed that Thy-1 binds directly to α(Vβ(3 integrin in trans eliciting responses in astrocytes. Nonetheless, whether α(Vβ(3 integrin might also serve as a Thy-1-ligand triggering a neuronal response has not been explored. Thus, utilizing primary neurons and a neuron-derived cell line CAD, Thy-1-mediated effects of α(Vβ(3 integrin on growth and retraction of neuronal processes were tested. In astrocyte-neuron co-cultures, endogenous α(Vβ(3 integrin restricted neurite outgrowth. Likewise, α(Vβ(3-Fc was sufficient to suppress neurite extension in Thy-1(+, but not in Thy-1(- CAD cells. In differentiating primary neurons exposed to α(Vβ(3-Fc, fewer and shorter dendrites were detected. This effect was abolished by cleavage of Thy-1 from the neuronal surface using phosphoinositide-specific phospholipase C (PI-PLC. Moreover, α(Vβ(3-Fc also induced retraction of already extended Thy-1(+-axon-like neurites in differentiated CAD cells as well as of axonal terminals in differentiated primary neurons. Axonal retraction occurred when redistribution and clustering of Thy-1 molecules in the plasma membrane was induced by α(Vβ(3 integrin. Binding of α(Vβ(3-Fc was detected in Thy-1 clusters during axon retraction of primary neurons. Moreover, α(Vβ(3-Fc-induced Thy-1 clustering correlated in time and space with redistribution and inactivation of Src kinase. Thus, our data indicates that α(Vβ(3 integrin is a ligand for Thy-1 that upon binding not only restricts the growth of neurites, but also induces retraction of already existing processes by inducing Thy-1 clustering. We propose that these events participate in bi-directional astrocyte-neuron communication relevant to axonal repair after neuronal damage.

  6. Sealing device

    Science.gov (United States)

    Garcia-Crespo, Andres Jose

    2013-12-10

    A sealing device for sealing a gap between a dovetail of a bucket assembly and a rotor wheel is disclosed. The sealing device includes a cover plate configured to cover the gap and a retention member protruding from the cover plate and configured to engage the dovetail. The sealing device provides a seal against the gap when the bucket assemply is subjected to a centrifugal force.

  7. Microfluidic Device

    Science.gov (United States)

    Tai, Yu-Chong (Inventor); Zheng, Siyang (Inventor); Lin, Jeffrey Chun-Hui (Inventor); Kasdan, Harvey L. (Inventor)

    2017-01-01

    Described herein are particular embodiments relating to a microfluidic device that may be utilized for cell sensing, counting, and/or sorting. Particular aspects relate to a microfabricated device that is capable of differentiating single cell types from dense cell populations. One particular embodiment relates a device and methods of using the same for sensing, counting, and/or sorting leukocytes from whole, undiluted blood samples.

  8. Gauging device

    International Nuclear Information System (INIS)

    Qurnell, F.D.; Patterson, C.B.

    1979-01-01

    A gauge supporting device for measuring say a square tube comprises a pair of rods or guides in tension between a pair of end members, the end members being spaced apart by a compression member or members. The tensioned guides provide planes of reference for measuring devices moved therealong on a carriage. The device is especially useful for making on site dimensional measurements of components, such as irradiated and therefore radioactive components, that cannot readily be transported to an inspection laboratory. (UK)

  9. Soft tissue anchor systems.

    Science.gov (United States)

    Yu, G V; Chang, T; White, J M

    1994-04-01

    The concept of soft tissue attachment and reattachment has been addressed over the years through a variety of surgical techniques. This includes tendons and ligaments that have been detached both surgically and traumatically from their osseous origins or insertions. This study is designed to provide the reader with a comprehensive overview of current commercially available devices. Detailed descriptions of the various devices are provided along with a discussion of the advantages and disadvantages of each. Their application and use in reconstructive foot and ankle surgery are also discussed.

  10. Fusion devices

    International Nuclear Information System (INIS)

    Fowler, T.K.

    1977-01-01

    Three types of thermonuclear fusion devices currently under development are reviewed for an electric utilities management audience. Overall design features of laser fusion, tokamak, and magnetic mirror type reactors are described and illustrated. Thrusts and trends in current research on these devices that promise to improve performance are briefly reviewed. Twenty photographs and drawings are included

  11. BRAKE DEVICE

    Science.gov (United States)

    O'Donnell, T.J.

    1959-03-10

    A brake device is described for utilization in connection with a control rod. The device comprises a pair of parallelogram link mechanisms, a control rod moveable rectilinearly therebetween in opposite directions, and shoes resiliently supported by the mechanism for frictional engagement with the control rod.

  12. Pre- and postoperative quantitative analysis of contour abnormalities in Graves upper eyelid retraction.

    Science.gov (United States)

    Ribeiro, Sara F T; Milbratz, Gherusa H; Garcia, Denny M; Devoto, Martin; Guilherme Neto, H; Mörschbächer, Ricardo; Pereira, Filipe J; Cruz, Antonio A V

    2012-01-01

    One of the most common problems of the surgical management of Graves upper eyelid retraction is the occurrence of eyelid contour abnormalities. In the present study, the postoperative contour of a large sample of eyelids of patients with Graves orbitopathy was measured. The postoperative upper eyelid contour of 62 eyes of 43 patients with Graves orbitopathy was subjectively classified by 3 experienced surgeons in 3 categories: poor, fair, and good. The shape of the eyelid contours in each category was then measured with a recently developed custom-made software by measuring multiple midpupil eyelid distances each 15° along the palpebral fissure. The upper eyelid contour of 60 normal subjects was also quantified as a control group. The mean ratio between the sum of the lateral and medial midpupil eyelid distances (lateral/medial ratio) was 1.10 ± 0.11 standard deviation in controls and 1.15 ± 0.13 standard deviation in patients. Postoperatively, the mean midpupil eyelid distance at 90° was 4.16 ± 1.13 mm standard deviation. The distribution lateral/medial ratios of the eyelids judged as having good contours was similar to the distribution of the controls with a modal value centered on the interval between 1.0 and 1.10. The distribution of lateral/medial ratios of the eyelids judged as having poor contour was bimodal, with eyelids with low and high lateral/medial ratios. Low lateral/medial ratios occurred when there was a lateral overcorrection, giving the eyelid a flat or a medial ptosis appearance. High lateral/medial ratios were due to a central or medial overcorrection or a lateral peak maintenance. Postoperative upper eyelid contour abnormalities can be quantified by comparing the sum of multiple midpupil eyelid distances of the lateral and medial sectors of the eyelid. Low and high lateral/medial ratios are anomalous and judged as unpleasant.

  13. Use of a minimally invasive tubular retraction system for deep-seated tumors in pediatric patients.

    Science.gov (United States)

    Recinos, Pablo F; Raza, Shaan M; Jallo, George I; Recinos, Violette Renard

    2011-05-01

    Microsurgical removal is the preferred treatment for most deep-seated, intraaxial tumors in the pediatric population. The feasibility of surgery as an option has improved with advances in surgical technology and technique. Tubular retractors disperse retraction forces over a greater surface area than do conventional retractors, which can lower the risk of ischemic complications. The authors describe their experience utilizing a new tubular retractor system specifically designed for cranial applications in conjunction with frameless neuronavigation. The Vycor ViewSite retractor was used in 4 pediatric patients (ages 15 months and 9, 10, and 16 years) with deep-seated intraaxial tumors. The lesions included a papillary tumor of the pineal region, a low-grade astrocytoma in the occipital lobe, a dysembryoplastic neuroepithelial tumor arising from the basal ganglia, and an intraventricular low-grade glioma. The extent of white matter damage along the surgical trajectory (based on T2 or FLAIR and diffusion restriction/apparent diffusion coefficient signals) and the extent of resection were assessed on postoperative imaging. Satisfactory resection or biopsy was achieved in all patients. A comparison of pre- and postoperative MR imaging studies revealed evidence of white matter damage along the surgical trajectory in 1 patient. None of the patients demonstrated new neurological deficits postoperatively. Obtaining surgical access to deep-seated, intraaxial tumors is challenging. In this small series of pediatric patients, the combination of the ViewSite tubular retractor and frameless neuronavigation facilitated the surgical approach. The combination of these technologies adds to the armamentarium to safely approach tumors in deep locations.

  14. PLASMA DEVICE

    Science.gov (United States)

    Gow, J.D.; Wilcox, J.M.

    1961-12-26

    A device is designed for producing and confining highenergy plasma from which neutrons are generated in copious quantities. A rotating sheath of electrons is established in a radial electric field and axial magnetic field produced within the device. The electron sheath serves as a strong ionizing medium to gas introdueed thereto and also functions as an extremely effective heating mechanism to the resulting plasma. In addition, improved confinement of the plasma is obtained by ring magnetic mirror fields produced at the ends of the device. Such ring mirror fields are defined by the magnetic field lines at the ends of the device diverging radially outward from the axis of the device and thereafter converging at spatial annular surfaces disposed concentrically thereabout. (AFC)

  15. Nasal Soft-Tissue Triangle Deformities.

    Science.gov (United States)

    Foda, Hossam M T

    2016-08-01

    The soft-tissue triangle is one of the least areas attended to in rhinoplasty. Any postoperative retraction, notching, or asymmetries of soft triangles can seriously affect the rhinoplasty outcome. A good understanding of the risk factors predisposing to soft triangle deformities is necessary to prevent such problems. The commonest risk factors in our study were the wide vertical domal angle between the lateral and intermediate crura, and the increased length of intermediate crus. Two types of soft triangle grafts were described to prevent and treat soft triangle deformities. The used soft triangle grafts resulted in an excellent long-term aesthetic and functional improvement. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

  16. Tissue expansion and fluid absorption by skin tissue following intradermal injections through hollow microneedles

    Science.gov (United States)

    Shrestha, Pranav; Stoeber, Boris

    2017-11-01

    Hollow microneedles provide a promising alternative to conventional drug delivery techniques due to improved patient compliance and the dose sparing effect. The dynamics of fluid injected through hollow microneedles into skin, which is a heterogeneous and deformable porous medium, have not been investigated extensively in the past. We have introduced the use of Optical Coherence Tomography (OCT) for real-time visualization of fluid injections into excised porcine tissue. The results from ex-vivo experiments, including cross-sectional tissue images from OCT and pressure/flow-rate measurements, show a transient mode of high flow-rate into the tissue followed by a lower steady-state infusion rate. The injected fluid expands the underlying tissue and causes the external free surface of the skin to rise, forming a characteristic intradermal wheal. We have used OCT to visualize the evolution of tissue and free surface deformation, and advancement of the boundary between regions of expanding and stationary tissue. We will show the effect of different injection parameters such as fluid pressure, viscosity and microneedle retraction on the injected volume. This work has been supported through funding from the Collaborative Health Research Program by the Natural Science and Engineering Research Council of Canada and the Canadian Health Research Institute, and through the Canada Research Chairs program.

  17. Retraction RETRACTION of "Association between polymorphisms in the XRCC1 gene and the risk of non-small cell lung cancer", by Han JC, Zhang YJ and Li XD - Genet. Mol. Res. 14 (4): 12888-12893 (2015).

    Science.gov (United States)

    Han, J C; Zhang, Y J; Li, X D

    2016-10-07

    The retracted article is: Han JC, Zhang YJ and Li XD (2015). Association between polymorphisms in the XRCC1 gene and the risk of non-small cell lung cancer. Genet. Mol. Res. 14: 12888-12893. The GMR editorial staff was alerted about this article (received on May 3, 2015; accepted on August 18, 2015) published on October 21, 2015 (DOI: 10.4238/2015.October.21.9) that was found to be substantially similar to the publication of "Association of XRCC1 gene polymorphisms with risk of non-small cell lung cancer" (received on January 25, 2015; accepted on March 23, 2015; e-published on April 1, 2015) by Kang et al., published in the International Journal of Clinical Experimental Pathology 8 (4): 4171-4176. The authors were aware of the Kang et al.'s paper, since they cite it several times in the manuscript published in GMR. Some of the language is similar between the two manuscripts, but what is the most concerning is that several of the tables in the papers are nearly identical. Tables 2 and 3 are exactly identical between the two articles, suggesting that the publication in GMR was plagiarized from the publication in the International Journal of Clinical Experimental Pathology. The Publisher and Editor decided to retract these articles in accordance with the recommendations of the Committee on Publication Ethics (COPE). After a thorough investigation, we have strong reason to believe that the peer review process was failure and, after review and contacting the authors, the editors of Genetics and Molecular Research decided to retract the article. The authors and their institutions were advised of this serious breach of ethics.

  18. Tissue types (image)

    Science.gov (United States)

    ... are 4 basic types of tissue: connective tissue, epithelial tissue, muscle tissue, and nervous tissue. Connective tissue supports ... binds them together (bone, blood, and lymph tissues). Epithelial tissue provides a covering (skin, the linings of the ...

  19. Retraction: Pogačnik M, Žnidarčič D, Strgar J. A school garden in biotechnical education. Arch biol sci. 2014; 66(2:785-92, DOI: 10.2298/ABS1402785P

    Directory of Open Access Journals (Sweden)

    Editorial

    2015-01-01

    Full Text Available This is a notice of retraction of the article: A school garden in biotechnical education, published in the Archives of Biological Sciences in 2014, Vol. 66, Issue 2. Due to a printing error, caused by the journal, the same paper has already been published in the Archives of Biological Sciences, Vol. 66, Issue 1, 2014 (DOI: 10.2298/ABS1401393P. Therefore, the latter article is being retracted. The corresponding author has been informed of this error and retraction. We apologize to the authors and to the readers for this error. Link to the retracted article 10.2298/ABS1402785P

  20. Use of a monopolar microneedle device in a transconjunctival, retroseptal approach.

    Science.gov (United States)

    Gander, Thomas; Rostetter, Claudio; Blumer, Michael; Wagner, Maximilian; Schumann, Paul; Wiedemeier, Daniel B; Rücker, Martin; Essig, Harald

    2017-12-01

    Transconjunctival approach is a standard procedure to address fractures of orbit and the infraorbital rim. Modifications such as transcaruncular or lateral canthal widening allow for extended orbital wall exposure. Especially concerning aesthetics, the transconjunctival approach shows benefits compared to the transcutaneous incisions, such as the transciliary and infraorbital access. Moreover, transconjunctival approach is favored in the literature concerning lid retraction. Monopolar devices have become popular in surgery in the past decades because of good depth control and simultaneous hemostasis with consequently improved overview. Also numerous surgeons use monopolar device in orbital surgery, their safety have never been proved. In this study monopolar microneedle device is compared with conventional access by scalpel concerning lid retraction, foreign body sensation and formation of symblepharon. In our collective complication rates were comparable between the scalpel and the microneedle group. The monopolar microneedle device shows favorable results compared with the scalpel and is easy to handle. Weather the conventional access by scalpel or the access by monopolar device is selected, is rather driven by the surgeon's preferences than by statistical relevance. Nevertheless, monopolar microneedle device shows better depth control and simplifies readaptation of the conjunctival wound's margin. Copyright © 2017 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

  1. Mini-screw implant or transpalatal arch-mediated anchorage reinforcement during canine retraction: a randomized clinical trial.

    Science.gov (United States)

    Sharma, Mohit; Sharma, Vineet; Khanna, Bharat

    2012-06-01

    To compare mesial movement of upper first molars during maxillary canine retraction using a pre-adjusted edgewise appliance provided by anchorage reinforcement and a transpalatal arch or mini-screw implant. Randomized clinical trial. Department of Orthodontics and Dentofacial Orthopedics, Armed Forces Medical College, Pune, India. From a cohort of subjects requiring the extraction of both upper first premolars and pre-adjusted edgewise appliances to correct their malocclusion, a total of 30 were randomly allocated to receive two different forms of anchorage reinforcement: group A--receiving mini-screw implant and group B--receiving a transpalatal arch Group A subjects received titanium mini-screw implants placed at the start of treatment between the maxillary second premolar and maxillary first molar. Maxillary second premolars were secured to the mini-screw implants using of 0.010-inch stainless steel ligature wire. Group B subjects received a custom-made transpalatal arch which was soldered to maxillary first molar bands. Active canine retraction was initiated in both groups on placement of a 0.019×0.025-inch stainless steel archwire using nickel titanium closed coil springs. Mesial movement of the upper first molars as measured on pre- (T1) and post-treatment (T2) lateral skull radiographs. The results showed that in group A the mean mesial movement of the first molars between T1 and T2 was 0.0 mm (SD 0.02; P = 0.90), whereas in Group B there was a mean forward movement of the first maolars of 2.48 mm (SD 0.71; Pimplants placed prior to levelling and aligning were able to provide absolute anchorage during maxillary canine retraction, in contrast to a transpalatal arch.

  2. RETRACTED: Nucleation and growth behavior of well-aligned ZnO nanorods on organic substrates in aqueous solutions

    Science.gov (United States)

    Lin, Chin-Ching; Chen, San-Yuan; Cheng, Syh-Yuh

    2005-09-01

    Available online : 21 July 2005 This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Editor-in-Chief. Two papers published in the Journal of Crystal Growth are being retracted due to a case of misrepresentation and reuse of data. A reader of the Journal has brought to our attention the reuse of data within two published papers: Growth behavior and microstructure evolution of ZnO nanorods grown on Si in aqueous solution, Sz-Chian Liou, Chi-Sheng Hsiao, San-Yuan Chen, Journal of Crystal Growth 274 (2005) 438-446. DOI: 10.1016/j.jcrysgro.2004.10.025 Nucleation and growth behavior of well-aligned ZnO nanorods on organic substrates in aqueous solutions, Chin-Ching Lin, San-Yuan Chen, and Syh-Yuh Cheng, Journal of Crystal Growth 283 (2005) 141-146. DOI: 10.1016/j.jcrysgro.2005.05.065 In these papers the same transmission electron micrograph was used to describe two different experimental situations and results bringing into question the content of these papers. The reuse of data without proper attribution is not acceptable within the scientific publishing community. In the present case, this is compounded by the attribution of the micrograph to a different experimental situation and drawing , as a result, new conclusions from data obtained from different samples. Such behavior undermines the integrity of the scientific publishing endeavor and is not acceptable. The authors are responsible for the content of their papers.

  3. Sealing devices

    International Nuclear Information System (INIS)

    Coulson, R.A.

    1980-01-01

    A sealing device for minimising the leakage of toxic or radioactive contaminated environments through a biological shield along an opening through which a flexible component moves that penetrates the shield. The sealing device comprises an outer tubular member which extends over a length not less than the maximum longitudinal movement of the component along the opening. An inner sealing block is located intermediate the length of the component by connectors and is positioned in the bore of the outer tubular member to slide in the bore and effect a seal over the entire longitudinal movement of the component. The cross-section of the device may be circular and the block may be of polytetrafluoroethylene or of nylon impregnated with molybdenum or may be metallic. A number of the sealing devices may be combined into an assembly for a plurality of adjacent longitudinally movable components, each adapted to sustain a tensile load, providing the various drives of a master-slave manipulator. (author)

  4. RETRACTED: A randomized, double-blind comparison of granisetron alone and combined with dexamethasone for post—laparoscopic cholecystectomy emetic symptoms

    Directory of Open Access Journals (Sweden)

    Yoshitaka Fujii, MD

    2003-09-01

    Full Text Available This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/about/our-business/policies/article-withdrawal.This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy.The following articles are being retracted as a result of overwhelming evidence of fabrication, related to the fact that the distributions of many variables reported by Dr Fujii in these studies could not have occurred by chance, and the inability of Dr Fujii's institutions to attest to the integrity of the study and/or its data conducted under their auspices. Because both the Journal's independent and collaborative attempts have not yielded this required information, the Journal has decided to retract the remaining journal manuscripts authored by Dr. Yoshitaka Fujii. The Publisher apologises that the implementation of this retraction was delayed due to an administrative oversight.Fujii Y, Tanaka H, Kawasaki T. A randomised, double-blind comparison of granisetron alone and combined with dexamethasone for post-laparoscopic choleystectomy emetic symptoms. Current Therapeutic Research 2003;64:514–21. https://www.sciencedirect.com/science/article/pii/S0011393X03001590Fujii Y, Tanaka H, Somekawa Y. Treatment of postoperative emetic symptoms with granisetron in women undergoing abdominal hysterectomy: a randomised, double-blind, placebo-controlled, dose-ranging study. Current Therapeutic Research 2004;65:321–9. https://www.sciencedirect.com/science/article/pii/S0011393X04800018.

  5. Clot retraction is mediated by factor XIII-dependent fibrin-αIIbβ3-myosin axis in platelet sphingomyelin-rich membrane rafts.

    Science.gov (United States)

    Kasahara, Kohji; Kaneda, Mizuho; Miki, Toshiaki; Iida, Kazuko; Sekino-Suzuki, Naoko; Kawashima, Ikuo; Suzuki, Hidenori; Shimonaka, Motoyuki; Arai, Morio; Ohno-Iwashita, Yoshiko; Kojima, Soichi; Abe, Mitsuhiro; Kobayashi, Toshihide; Okazaki, Toshiro; Souri, Masayoshi; Ichinose, Akitada; Yamamoto, Naomasa

    2013-11-07

    Membrane rafts are spatially and functionally heterogenous in the cell membrane. We observed that lysenin-positive sphingomyelin (SM)-rich rafts are identified histochemically in the central region of adhered platelets where fibrin and myosin are colocalized on activation by thrombin. The clot retraction of SM-depleted platelets from SM synthase knockout mouse was delayed significantly, suggesting that platelet SM-rich rafts are involved in clot retraction. We found that fibrin converted by thrombin translocated immediately in platelet detergent-resistant membrane (DRM) rafts but that from Glanzmann's thrombasthenic platelets failed. The fibrinogen γ-chain C-terminal (residues 144-411) fusion protein translocated to platelet DRM rafts on thrombin activation, but its mutant that was replaced by A398A399 at factor XIII crosslinking sites (Q398Q399) was inhibited. Furthermore, fibrin translocation to DRM rafts was impaired in factor XIII A subunit-deficient mouse platelets, which show impaired clot retraction. In the cytoplasm, myosin translocated concomitantly with fibrin translocation into the DRM raft of thrombin-stimulated platelets. Furthermore, the disruption of SM-rich rafts by methyl-β-cyclodextrin impaired myosin activation and clot retraction. Thus, we propose that clot retraction takes place in SM-rich rafts where a fibrin-αIIbβ3-myosin complex is formed as a primary axis to promote platelet contraction.

  6. Sphingosine-1-Phosphate and the S1P3 Receptor Initiate Neuronal Retraction via RhoA/ROCK Associated with CRMP2 Phosphorylation

    Science.gov (United States)

    Quarta, Serena; Camprubí-Robles, Maria; Schweigreiter, Rüdiger; Matusica, Dusan; Haberberger, Rainer V.; Proia, Richard L.; Bandtlow, Christine E.; Ferrer-Montiel, Antonio; Kress, Michaela

    2017-01-01

    The bioactive lipid sphingosine-1-phosphate (S1P) is an important regulator in the nervous system. Here, we explored the role of S1P and its receptors in vitro and in preclinical models of peripheral nerve regeneration. Adult sensory neurons and motor neuron-like cells were exposed to S1P in an in vitro assay, and virtually all neurons responded with a rapid retraction of neurites and growth cone collapse which were associated with RhoA and ROCK activation. The S1P1 receptor agonist SEW2871 neither activated RhoA or neurite retraction, nor was S1P-induced neurite retraction mitigated in S1P1-deficient neurons. Depletion of S1P3 receptors however resulted in a dramatic inhibition of S1P-induced neurite retraction and was on the contrary associated with a significant elongation of neuronal processes in response to S1P. Opposing responses to S1P could be observed in the same neuron population, where S1P could activate S1P1 receptors to stimulate elongation or S1P3 receptors and retraction. S1P was, for the first time in sensory neurons, linked to the phosphorylation of collapsin response-mediated protein-2 (CRMP2), which was inhibited by ROCK inhibition. The improved sensory recovery after crush injury further supported the relevance of a critical role for S1P and receptors in fine-tuning axonal outgrowth in peripheral neurons. PMID:29066950

  7. A comparison of lower canine retraction and loss of anchorage between conventional and self-ligating brackets: a single-center randomized split-mouth controlled trial.

    Science.gov (United States)

    da Costa Monini, André; Júnior, Luiz Gonzaga Gandini; Vianna, Alexandre Protásio; Martins, Renato Parsekian

    2017-05-01

    To evaluate the rate of lower canine retraction, anchorage loss, and changes on lower canines and first molars axial inclination using self-ligating and conventional brackets. Twenty-five adult patients with a treatment plan involving extractions of four first premolars were selected for this split-mouth trial and had either conventional or self-ligating brackets bonded to lower canines in a block randomization. Retraction was accomplished using 100-g nickel titanium closed-coil springs, which were reactivated each 4 weeks. Oblique radiographs were taken before and after total canine retraction and the cephalograms were superimposed on stable structures of the mandible. Cephalometric points were digitized twice by a single-blinded operator for error control and the average of the points were used to determine the following variables: canine cusp horizontal changes, molar cusp horizontal changes, and angulation changes in canines and molars. Paired t tests were used to analyze the blinded data for group differences. All patients reached final phase without bracket debonds. No differences were found between the two groups for all variables tested. No serious harm was observed. Both brackets showed the same rate of canine retraction and loss of anteroposterior anchorage of the molars. No changes were found between brackets regarding the inclination of canines and first molars. Using self-ligating brackets to retract lower canines will not increase the velocity of tooth movement, does not increase anchorage, and does not decrease tipping.

  8. Ferroelectric devices

    CERN Document Server

    Uchino, Kenji

    2009-01-01

    Updating its bestselling predecessor, Ferroelectric Devices, Second Edition assesses the last decade of developments-and setbacks-in the commercialization of ferroelectricity. Field pioneer and esteemed author Uchino provides insight into why this relatively nascent and interdisciplinary process has failed so far without a systematic accumulation of fundamental knowledge regarding materials and device development.Filling the informational void, this collection of information reviews state-of-the-art research and development trends reflecting nano and optical technologies, environmental regulat

  9. Retraction of 'Composition design and mechanical properties of BCC Ti solid solution alloys with low Young's modulus'

    International Nuclear Information System (INIS)

    Tulugan, Keli Mu; Park, Cheol Hong; Park, Won Jo; Qing, Wang

    2012-01-01

    The article 'Composition design and mechanical properties of BCC Ti solid solution alloys with low Young's modulus' has been retracted upon the request of the third author (Prof. Wang Qing, the first author's former advisor during his internship at DaLian University of Technology). The article was published without the third author's knowledge and consent. The corresponding author (Prof. Wonjo Park) apologizes to the third author, to the readers, and to the editorial staff of the JMST. The JMST editorial board does not tolerate such actions from authors and we will take appropriate action to prevent this from happening in the future

  10. Dosimetry of a prototype retractable eMLC for fixed-beam electron therapy

    International Nuclear Information System (INIS)

    Hogstrom, Kenneth R.; Boyd, Robert A.; Antolak, John A.; Svatos, Michelle M.; Faddegon, Bruce A.; Rosenman, Julian G.

    2004-01-01

    An electron multileaf collimator (eMLC) has been designed that is unique in that it retracts to 37 cm from the isocenter [63-cm source-to-collimator distance (SCD)] and can be deployed to distances of 20 and 10 cm from the isocenter (80 and 90 cm SCD, respectively). It is expected to be capable of arc therapy at 63 cm SCD; isocentric, fixed-beam therapy at 80 cm SCD; and source-to-surface distance (SSD), fixed-beam therapy at 90 cm SCD. In all positions, its leaves could be used for unmodulated or intensity-modulated therapy. Our goal in the present work is to describe the general characteristics of the eMLC and to demonstrate that its leakage characteristics and dosimetry are adequate for SSD, fixed-beam therapy as an alternative to Cerrobend cutouts with applicators once the prototype's leaves are motorized. Our eMLC data showed interleaf electron leakage at 15 MeV to be less than 0.1% based on a 0.0025 cm manufacturing tolerance, and lateral electron leakage at 5 and 15 MeV to be less than 2%. X-ray leakage through the leaves was 1.6% at 15 MeV. Our data showed that beam penumbra was independent of direction and leaf position. The dosimetric properties of square fields formed by the eMLC were very consistent with those formed by Cerrobend inserts in the 20x20 cm 2 applicator. Output factors exhibited similar field-size dependence. Airgap factors exhibited almost identical field-size dependence at two SSDs (105 and 110 cm), consistent with the common assumption that airgap factors are applicator independent. Percent depth-dose curves were similar, but showed variations up to 3% in the buildup region. The pencil-beam algorithm (PBA) fit measured data from the eMLC and applicator-cutout systems equally well, and the resulting two-dimensional (2-D) dose distributions, as predicted by the PBA, agreed well at common airgap distance. Simulating patient setups for breast and head and neck treatments showed that almost all fields could be treated using similar SSDs as

  11. The Relationship between Rostral Retraction of the Pannus and Outcomes at Cesarean Section.

    Science.gov (United States)

    Turan, Ozhan M; Rosenbloom, Joshua; Galey, Jessica L; Kahntroff, Stephanie L; Bharadwaj, Shobana; Turner, Shafonya M; Malinow, Andrew M

    2016-08-01

    Objective Maternal obesity presents several challenges at cesarean section. In an effort to routinely employ a transverse suprapubic skin incision, we often retract the pannus in a rostral direction using adhesive tape placed after induction of anesthesia and before surgical preparation of the skin. We sought to understand the association between taping and neonatal cord blood gases, Apgar scores, and time from skin incision to delivery of the neonate. Study Design This is a retrospective study, performed using prospectively collected anesthesiology records with data supplemented from the patients' medical records. Singleton pregnancies with morbid obesity (body mass index [BMI] > 40 kg/m(2)) between 37 and 42 weeks of gestation who delivered via nonurgent, scheduled cesarean delivery under regional (spinal, combined spinal-epidural, or epidural) anesthesia between March 2007 and March 2013 were identified. Maternal demographics including BMI, comorbidities, type of anesthesia, time intervals during the surgery, cord gas results, and Apgar scores were collected. The relationship between taping and blood acid-base status, Apgar scores, and interval from skin incision to delivery was investigated using appropriate statistical tests. Results There were 2,525 (27.5%) cesarean deliveries out of 9,189 total deliveries. Applying the described inclusion/exclusion criteria, 141 patients were identified (33 taped and 108 nontaped). There was no significant difference in BMI between the taped (51.9 kg/m(2)) and nontaped groups (47.4 kg/m(2)), p > 0.05. There was no difference in type of anesthesia (p > 0.05). The only significant difference between the taped and not-taped groups was the presence of chronic hypertension in the taped group (p = 0.03). There were no significant differences in cord blood gas values, Apgar scores, or skin incision to delivery interval (p > 0.05 for all outcomes). Conclusions Taping of the pannus at cesarean section is a

  12. Tissue Classification

    DEFF Research Database (Denmark)

    Van Leemput, Koen; Puonti, Oula

    2015-01-01

    Computational methods for automatically segmenting magnetic resonance images of the brain have seen tremendous advances in recent years. So-called tissue classification techniques, aimed at extracting the three main brain tissue classes (white matter, gray matter, and cerebrospinal fluid), are now...... well established. In their simplest form, these methods classify voxels independently based on their intensity alone, although much more sophisticated models are typically used in practice. This article aims to give an overview of often-used computational techniques for brain tissue classification...

  13. Ten-year results of cartilage palisades versus fascia in eardrum reconstruction after surgery for sinus or tensa retraction cholesteatoma in children

    DEFF Research Database (Denmark)

    Cayé-Thomasen, Per; Andersen, Janne; Uzun, Cem

    2009-01-01

    threshold, and pure tone air-bone gap). RESULTS: All but two patients in both groups attended the 10-year follow-up examination (94% attendance). The mean overall follow-up period was 119 months (115 months in the palisade and 125 months in the fascia group). Total number of retractions during follow....... METHODS: A total of 64 children underwent surgery for either sinus or tensa retraction cholesteatoma during the period 1995 to 2000 (mean age 9 years, range 5-15). The eardrum was reconstructed using cartilage palisades in 32 children (32 ears) and fascia or perichondrium in 32 children (33 ears......). The patients were followed for at least one year postoperatively and re-evaluated 4 years after surgery, and again recently at a mean of 10 years. The main outcome measures were postoperative drum retraction and perforation, cholesteatoma recurrence, and hearing acuity (pure tone average, speech reception...

  14. Retraction: Adyel et al. Health Risk Assessment of Pesticide Residues via Dietary Intake of Market Vegetables from Dhaka, Bangladesh. Foods 2013, 2, 64–75

    Directory of Open Access Journals (Sweden)

    Md. Shakhaoat Hossain

    2013-07-01

    Full Text Available The following article [1], doi: 10.3390/foods2010064, website: http://www.mdpi.com/2304-8158/2/1/64, has been retracted by the authors because of some major errors in broad field of pesticide residues identification and concentrations. During random cross check retention time of pesticides by HPLC did not match with the standards of detected pesticides. As a result concentration of all detected pesticides, maximum residue limits (MRLs and health risk assessments were changed. All these errors made the article [1] as a wrong one. All authors have confirmed that the reported results produced using quite inappropriate procedures. As first author herein, I take full responsibility for the retraction of our experiments and any other errors in its contents, and would like to offer my apologies on behalf of my co-authors to the readership of Foods for any inconveniences caused by this retraction.

  15. Mini-open lateral retroperitoneal lumbar spine approach using psoas muscle retraction technique. Technical report and initial results on six patients.

    Science.gov (United States)

    Aghayev, Kamran; Vrionis, Frank D

    2013-09-01

    The main aim of this paper was to report reproducible method of lumbar spine access via a lateral retroperitoneal route. The authors conducted a retrospective analysis of the technical aspects and clinical outcomes of six patients who underwent lateral multilevel retroperitoneal interbody fusion with psoas muscle retraction technique. The main goal was to develop a simple and reproducible technique to avoid injury to the lumbar plexus. Six patients were operated at 15 levels using psoas muscle retraction technique. All patients reported improvement in back pain and radiculopathy after the surgery. The only procedure-related transient complication was weakness and pain on hip flexion that resolved by the first follow-up visit. Psoas retraction technique is a reliable technique for lateral access to the lumbar spine and may avoid some of the complications related to traditional minimally invasive transpsoas approach.

  16. Retraction notice to "Sapphirine and fluid inclusions in Tel Thanoun mantle xenoliths, Syria" [J. Afr. Earth Sci. 116 (2015) 105-113

    Science.gov (United States)

    Bilal, Ahmad

    2018-06-01

    This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/about/our-business/policies/article-withdrawal). This article has been retracted at the request of the Editor. Following complaints raised, it appears to be a reworking of a former manuscript submitted by a group of five authors but not published. The present author has published here alone, without acknowledging the work of the four other co-authors of the initial submission. This poses a problem of integrity as this new article contains material which was submitted for publication initially by all five authors. By retracting this article, we encourage all the authors of the initial manuscript to resubmit together a new version which respects authorship and scientific integrity.

  17. Eating high fat chow increases the sensitivity of rats to 8-OH-DPAT-induced lower lip retraction.

    Science.gov (United States)

    Li, Jun-Xu; Ju, Shutian; Baladi, Michelle G; Koek, Wouter; France, Charles P

    2011-12-01

    Eating high fat food can alter sensitivity to drugs acting on dopamine systems; this study examined whether eating high fat food alters sensitivity to a drug acting on serotonin (5-HT) systems. Sensitivity to (+)-8-hydroxy-2-(dipropylamino) tetralin hydrobromide (8-OH-DPAT; 5-HT1A receptor agonist)-induced lower lip retraction was examined in separate groups (n=8-9) of rats with free access to standard (5.7% fat) or high fat (34.3% fat) chow; sensitivity to quinpirole (dopamine D3/D2 receptor agonist)-induced yawning was also examined. Rats eating high fat chow gained more body weight than rats eating standard chow and, after 6 weeks of eating high fat chow, they were more sensitive to 8-OH-DPAT (0.01-0.1 mg/kg)-induced lower lip retraction and quinpirole (0.0032-0.32 mg/kg)-induced yawning. These changes were not reversed when rats that previously ate high fat chow were switched to eating standard chow and sensitivity to 8-OH-DPAT and quinpirole increased when rats that previously ate standard chow ate high fat chow. These data extend previous results showing changes in sensitivity to drugs acting on dopamine systems in animals eating high fat chow to a drug acting at 5-HT1A receptors and they provide support for the notion that eating certain foods impacts sensitivity to drugs acting on monoamine systems.

  18. RETRACTED: A new perspective on remote Saddle Sine and Cosine coils technique for determination of tokamak plasma equilibrium status

    Science.gov (United States)

    Salar Elahi, A.; Ghoranneviss, M.

    This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/about/our-business/policies/article-withdrawal) This article has been retracted at the request of the Editors-in-Chief. After a thorough investigation, the Editors have concluded that the acceptance of this article was based upon the positive advice of at least one illegitimate reviewer report. The report was submitted from an email account which was provided to the journal as a suggested reviewer during the submission of the article. Although purportedly a real reviewer account, the Editors have concluded that this was not of an appropriate, independent reviewer. This manipulation of the peer-review process represents a clear violation of the fundamentals of peer review, our publishing policies, and publishing ethics standards. Apologies are offered to the reviewers whose identities were assumed and to the readers of the journal that this deception was not detected during the submission process. Further, the corresponding author was not able to explain the reason for adding the author M. Ghoranneviss to the revised article.

  19. RETRACTED: A new perspective on remote Saddle Sine and Cosine coils technique for determination of tokamak plasma equilibrium status

    Directory of Open Access Journals (Sweden)

    A. Salar Elahi

    Full Text Available This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/about/our-business/policies/article-withdrawal.This article has been retracted at the request of the Editors-in-Chief.After a thorough investigation, the Editors have concluded that the acceptance of this article was based upon the positive advice of at least one illegitimate reviewer report. The report was submitted from an email account which was provided to the journal as a suggested reviewer during the submission of the article. Although purportedly a real reviewer account, the Editors have concluded that this was not of an appropriate, independent reviewer.This manipulation of the peer-review process represents a clear violation of the fundamentals of peer review, our publishing policies, and publishing ethics standards. Apologies are offered to the reviewers whose identities were assumed and to the readers of the journal that this deception was not detected during the submission process.Further, the corresponding author was not able to explain the reason for adding the author M. Ghoranneviss to the revised article.

  20. RETRACTED: Structural properties of resonant electric and magnetic fields correlation with X-ray generation and MHD activity in tokamak

    Directory of Open Access Journals (Sweden)

    A. Salar Elahi

    Full Text Available This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/about/our-business/policies/article-withdrawal.This article has been retracted at the request of the Editors-in-Chief.After a thorough investigation, the Editors have concluded that the acceptance of this article was based upon the positive advice of at least two illegitimate reviewer reports. The reports were submitted from email accounts which were provided to the journal as suggested reviewers during the submission of the article. Although purportedly real reviewer accounts, the Editors have concluded that these were not of appropriate, independent reviewers.This manipulation of the peer-review process represents a clear violation of the fundamentals of peer review, our publishing policies, and publishing ethics standards. Apologies are offered to the reviewers whose identities were assumed and to the readers of the journal that this deception was not detected during the submission process.No reason has been provided for the addition of the author name A. Salar Elahi to the authorship of the revised article.

  1. RETRACTED: A new perspective on structural, materials, and simulation of flow and cavitation around the propeller with energy saving system

    Science.gov (United States)

    Fathololumi, S.; Hassanabad, M. Ghodsi

    2016-12-01

    This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Principal Editor. After a thorough investigation, the Editor has concluded that the review process for this article was compromised. The acceptance was based on information from two reviewer reports that were submitted from email accounts provided to the journal as suggested reviewers during the submission of the article. Although purportedly real reviewer accounts, the Editor has concluded that these were not of appropriate, independent reviewers. This manipulation of the peer-review process represents a clear violation of the fundamentals of peer review, our publishing policies, and publishing ethics standards. Apologies are offered to the reviewers whose identities were assumed and to the readers of the journal that this deception was not detected during the submission process. Further, no reason has been provided for the removal of three authors and addition of the authors S. Fathololumi and M. Ghodsi Hassanabad upon revision of the article.

  2. The level’s changing of transforming growth factor β2 during canine retraction in non-growing age patient

    Directory of Open Access Journals (Sweden)

    Adianti Adianti

    2015-06-01

    Full Text Available Background: Orthodontic tooth movement occurred as a result of alveolar bone remodeling and collagen due to mechanical load. This mechanical load applied to the tooth will exert a number of cytokine and growth factors. One of the growth factors that are often associated with orthodontic tooth movement is transforming growth factor-β(TGF-β. It has 3 isoforms, TGF-β1, TGF-β2, and TGF-β3. It has been known that in adult patient, tooth movement rate was slower. Purpose: The aim of this study was to investigate the changing level of TGF-β2 in non-growing patient due to mechanical load in canine retraction. Method: Gingival crevicular fluid from 6 subjects who undergo canine retraction was taken to investigate changing level of TGF-β2. Distal site of each upper canine served as an experimental tooth. The gingival crevicular fluid from experimental tooth was taken just prior to mechanical load, at 24h and 72h after mechanical load. Result: ELISA reader showed that level of TGF-β2 was decreasing during experiment time. Conclusion: It can be concluded that in non-growing patient, TGF-β2 has less role in alveolar bone resorption in orthodontic tooth movement.

  3. RETRACTED: The revised stratigraphy of the hominin-bearing site of Kromdraai (Gauteng, South Africa) and associated perspectives.

    Science.gov (United States)

    Bruxelles, Laurent; Maire, Richard; Beaudet, Amélie; Couzens, Raymond; Duranthon, Francis; Fourvel, Jean-Baptiste; Stratford, Dominic; Thackeray, Francis; Braga, José

    2018-01-01

    This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the co-Editors-in-Chief and the authors. The Results and Discussion of this article duplicate significant parts of book chapter "A revised stratigraphy of Kromdraai", published by L.B., R.M., R.C., F.T. and J.B. in Braga, J. and Thackeray, J.F. (Eds.), "Kromdraai. A Birthplace of Paranthropus in the Cradle of Humankind" (2016, SUN MeDIA MeTRO, pp. 31-47), https://doi.org/10.18820/9781928355076. One of the conditions of submission of a paper to Journal of Human Evolution is that authors declare explicitly that that their work is original and has not been published previously. Reuse of any data should be appropriately cited. As such this article represents an abuse of the scientific publishing system. The scientific community takes a very strong view on this matter and apologies are offered to readers of the journal that this was not detected during the submission process. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Reproducibility of isometric shoulder protraction and retraction strength measurements in normal subjects and individuals with winged scapula.

    Science.gov (United States)

    Oh, Jae-Seop; Kang, Min-Hyeok; Dvir, Zeevi

    2016-11-01

    The strength of the shoulder protractors and retractors may be compromised in individuals with winged scapula (IwWS). However, no standard approach to measuring the strength of these muscles has been described. The aim of this study was to study the intra-rater and inter-rater reproducibility of a fixed-base isometric dynamometer and to describe cutoff scores for clinically meaningful change for protraction and retraction isometric strength. Twice during a week, 20 normal subjects and 20 IwWS were tested by 2 independent raters. IwWS were significantly weaker (P isometric strength. Excellent intra-rater and inter-rater correlations were obtained in most combinations, leading to low cutoff scores for meaningful change expressed in terms of the smallest real difference. When it is properly used, the technique described in this paper is recommended as an effective clinical tool for the quantitative assessment of protraction and retraction isometric strength, both for status determination and for monitoring of change in IwWS during and after rehabilitation. Copyright © 2016 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

  5. RETRACTED ARTICLE: Personal distress, but not sympathy, predicts the negative influence of bystanders on responding to an emergency.

    Science.gov (United States)

    2015-06-01

    At the request of the authors this article has been retracted. During the preparation of a follow-up study, a mistake was found in the experimental script of the cued reaction time task of experiment 2. Four out of six conditions were mislabeled. Consequently, the reported findings and their interpretation and discussion are incorrect. Careful reexamination and reanalyzing of the data using the correct labels revealed a pattern of results that is not entirely compatible with several of the main claims of the article. Importantly, the corrected results show that reaction times do not increase with more bystanders present at an emergency.Moreover, not only personal distress but also perspective taking predicts the negative influence of bystanders on reaction times.We believe that these new findings undermine our central claim of decreased action preparation as a function of bystanders present at an emergency and the enhancement of this effect in people with higher levels of trait personal distress. While the results and discussion of experiment 1 and 3 remain correct, the new results of experiment 2 influence the article to such an extent that we currently see no other option than to retract the article from publication. We will continue to work on this topic and hope to publish the new results in due time. We deeply regret the publication of invalid results.We sincerely apologize to the Editor and reviewers of the manuscript, and the readers of Cognitive, Affective, & Behavioral Neuroscience.

  6. Guide device

    International Nuclear Information System (INIS)

    Brammer, C.M. Jr.

    1977-01-01

    Disclosed is a fuel handling guide tube centering device for use in nuclear reactors during fuel assembly handling operations. The device comprises an outer ring secured to the flange of a nuclear reactor pressure vessel, a rotatable table rotatably coupled to the outer ring, and a plurality of openings through the table. Truncated locating cones are positioned in each of the openings in the table, and the locating cones center the guide tube during fuel handling operations. The openings in the table are located such that each fuel assembly in the nuclear core may be aligned with one of the openings by a suitable rotation of the table. The locating cones thereby provide alignment between the fuel handling mechanism located in the guide tube and the individual fuel assemblies of the cone. The need for a device to provide alignment is especially critical for floating nuclear power plants, where wave motion may exist during fuel handling operations. 5 claims, 4 figures

  7. Dental impression technique using optoelectronic devices

    Science.gov (United States)

    Sinescu, Cosmin; Barua, Souman; Topala, Florin Ionel; Negrutiu, Meda Lavinia; Duma, Virgil-Florin; Gabor, Alin Gabriel; Zaharia, Cristian; Bradu, Adrian; Podoleanu, Adrian G.

    2018-03-01

    INTRODUCTION: The use of Optical Coherence Tomography (OCT) as a non-invasive and high precision quantitative information providing tool has been well established by researches within the last decade. The marginal discrepancy values can be scrutinized in optical biopsy made in three dimensional (3D) micro millimetre scale and reveal detailed qualitative and quantitative information of soft and hard tissues. OCT-based high resolution 3D images can provide a significant impact on finding recurrent caries, restorative failure, analysing the precision of crown preparation, and prosthetic elements marginal adaptation error with the gingiva and dental hard tissues. During the CAD/CAM process of prosthodontic restorations, the circumvent of any error is important for the practitioner and the technician to reduce waste of time and material. Additionally, OCT images help to achieve a new or semi-skilled practitioner to analyse their crown preparation works and help to develop their skills faster than in a conventional way. The aim of this study is to highlight the advantages of OCT in high precision prosthodontic restorations. MATERIALS AND METHODS: 25 preparations of frontal and lateral teeth were performed for 7 different patients. The impressions of the prosthetic fields were obtained both using a conventional optoelectronic system (Apolo Di, Syrona) and a Spectral Domain using OCT (Dental prototype, working at 860 nm). For the conventional impression technique the preparation margins were been prelevated by gingival impregnated cords. No specific treatments were performed by the OCT impression technique. RESULTS: The scanning performed by conventional optoelectronic system proved to be quick and accurate in terms of impression technology. The results were represented by 3D virtual models obtained after the scanning procedure was completed. In order to obtain a good optical impression a gingival retraction cord was inserted between the prepared tooth and the gingival

  8. Retraction notice to: Artificial intelligence in pharmaceutical product formulation: Neural computing [Chem. Ind. Chem. Eng. Q. 15(4) (2009) 227-236

    OpenAIRE

    Ibrić Svetlana; Đurić Zorica; Parojčić Jelena; Petrović Jelena

    2011-01-01

    This article has been retracted at the request of the authors. The retraction has been made because the authors admitted that they took the text and rawings from the review article written by R. Rowe and E. Colbourn, Future Medicinal Chemistry 1(4) (2009) 713-726, without their permission and even did not include this article in the list of references. One of the conditions of submission of a paper for publication are that authors confirm that their work is entirely originally written, someon...

  9. Retraction: Begum et al. Potential Impact of Multi-Walled Carbon Nanotubes Exposure to the Seedling Stage of Selected Plant Species. Nanomaterials 2014, 4, 203–221

    Directory of Open Access Journals (Sweden)

    Nanomaterials Editorial Office

    2015-03-01

    Full Text Available We have become aware that a substantial part of the main text of [1] is copied from multiple other publications. In total, 46% of the main text was taken from publications by the same authors [2,3] and 10% from other papers [4,5]. Because of the extent of text taken verbatim from previously published articles, we have made the decision to retract the article. All the authors of [1] have agreed to this decision. This paper is thus declared retracted and shall be marked accordingly for the scientific record.[...

  10. Atomically resolved tissue integration.

    Science.gov (United States)

    Karlsson, Johan; Sundell, Gustav; Thuvander, Mattias; Andersson, Martin

    2014-08-13

    In the field of biomedical technology, a critical aspect is the ability to control and understand the integration of an implantable device in living tissue. Despite the technical advances in the development of biomaterials, the elaborate interplay encompassing materials science and biology on the atomic level is not very well understood. Within implantology, anchoring a biomaterial device into bone tissue is termed osseointegration. In the most accepted theory, osseointegration is defined as an interfacial bonding between implant and bone; however, there is lack of experimental evidence to confirm this. Here we show that atom probe tomography can be used to study the implant-tissue interaction, allowing for three-dimensional atomic mapping of the interface region. Interestingly, our analyses demonstrated that direct contact between Ca atoms and the implanted titanium oxide surface is formed without the presence of a protein interlayer, which means that a pure inorganic interface is created, hence giving experimental support to the current theory of osseointegration. We foresee that this result will be of importance in the development of future biomaterials as well as in the design of in vitro evaluation techniques.

  11. Medical Devices

    NARCIS (Netherlands)

    Verkerke, Gijsbertus Jacob; Mahieu, H.F.; Geertsema, A.A.; Hermann, I.F.; van Horn, J.R.; Hummel, J. Marjan; van Loon, J.P.; Mihaylov, D.; van der Plaats, A.; Schraffordt Koops, H.; Schutte, H.K.; Veth, R.P.H.; de Vries, M.P.; Rakhorst, G.; Shi, Donglu

    2004-01-01

    The development of new medical devices is a very time-consuming and costly process. Besides the time between the initial idea and the time that manufacturing and testing of prototypes takes place, the time needed for the development of production facilities, production of test series, marketing,

  12. Electrochemical device

    Science.gov (United States)

    Grimes, Patrick G.; Einstein, Harry; Bellows, Richard J.

    1988-01-12

    A tunnel protected electrochemical device features channels fluidically communicating between manifold, tunnels and cells. The channels are designed to provide the most efficient use of auxiliary power. The channels have a greater hydraulic pressure drop and electrical resistance than the manifold. This will provide a design with the optimum auxiliary energy requirements.

  13. Assistive Devices

    Science.gov (United States)

    If you have a disability or injury, you may use a number of assistive devices. These are tools, products or types of equipment that help you perform tasks and activities. They may help you move around, see, communicate, eat, or get ...

  14. Detection device

    Science.gov (United States)

    Smith, J.E.

    1981-02-27

    The present invention is directed to a detection device comprising: (1) an entrance chamber; (2) a central chamber; and (3) an exit chamber. The central chamber includes an ionizing gas, anode, and means for connecting the anode with an external power supply and pulse counter.

  15. Fractional-order devices

    CERN Document Server

    Biswas, Karabi; Caponetto, Riccardo; Mendes Lopes, António; Tenreiro Machado, José António

    2017-01-01

    This book focuses on two specific areas related to fractional order systems – the realization of physical devices characterized by non-integer order impedance, usually called fractional-order elements (FOEs); and the characterization of vegetable tissues via electrical impedance spectroscopy (EIS) – and provides readers with new tools for designing new types of integrated circuits. The majority of the book addresses FOEs. The interest in these topics is related to the need to produce “analogue” electronic devices characterized by non-integer order impedance, and to the characterization of natural phenomena, which are systems with memory or aftereffects and for which the fractional-order calculus tool is the ideal choice for analysis. FOEs represent the building blocks for designing and realizing analogue integrated electronic circuits, which the authors believe hold the potential for a wealth of mass-market applications. The freedom to choose either an integer- or non-integer-order analogue integrator...

  16. Cooling device in thermonuclear device

    International Nuclear Information System (INIS)

    Honda, Tsutomu.

    1988-01-01

    Purpose: To prevent loss of cooling effect over the entire torus structure directly after accidental toubles in a cooling device of a thermonuclear device. Constitution: Coolant recycling means of a cooling device comprises two systems, which are alternately connected with in-flow pipeways and exit pipeways of adjacent modules. The modules are cooled by way of the in-flow pipeways and the exist pipeways connected to the respective modules by means of the coolant recycling means corresponding to the respective modules. So long as one of the coolant recycling means is kept operative, since every one other modules of the torus structure is still kept cooled, the heat generated from the module put therebetween, for which the coolant recycling is interrupted, is removed by means of heat conduction or radiation from the module for which the cooling is kept continued. No back-up emergency cooling system is required and it can provide high economic reliability. (Kamimura, M.)

  17. Laparoscopic cholecystectomy using abdominal wall retraction. Hemodynamics and gas exchange, a comparison with conventional pneumoperitoneum

    NARCIS (Netherlands)

    Meijer, D. W.; Rademaker, B. P.; Schlooz, S.; Bemelman, W. A.; de Wit, L. T.; Bannenberg, J. J.; Stijnen, T.; Gouma, D. F.

    1997-01-01

    BACKGROUND: Disadvantages related to CO2 pneumoperitoneum have led to development of the abdominal wall retractor (AWR), a device designed to facilitate laparoscopic surgery without conventional pneumoperitoneum (15 mmHg CO2). We investigated the effects of the AWR on hemodynamics and gas exchange

  18. Partial Aminoglycoside Lesions in Vestibular Epithelia Reveal Broad Sensory Dysfunction Associated with Modest Hair Cell Loss and Afferent Calyx Retraction.

    Science.gov (United States)

    Sultemeier, David R; Hoffman, Larry F

    2017-01-01

    Although the effects of aminoglycoside antibiotics on hair cells have been investigated for decades, their influences on the dendrites of primary afferent neurons have not been widely studied. This is undoubtedly due to the difficulty in disassociating pathology to dendritic processes from that resulting from loss of the presynaptic hair cell. This was overcome in the present investigation through development of a preparation using Chinchilla laniger that enabled direct perilymphatic infusion. Through this strategy we unmasked gentamicin's potential effects on afferent calyces. The pathophysiology of the vestibular neuroepithelia after post-administration durations of 0.5 through 6 months was assessed using single-neuron electrophysiology, immunohistochemistry, and confocal microscopy. Hair cell densities within cristae central zones (0.5-, 1-, 2-, and 6-months) and utricle peri- and extrastriola (6-months) regions were determined, and damage to calretinin-immunoreactive calyces was quantified. Gentamicin-induced hair cell loss exhibited a profile that reflected elimination of a most-sensitive group by 0.5-months post-administration (18.2%), followed by loss of a second group (20.6%) over the subsequent 5.5 months. The total hair cell loss with this gentamicin dose (approximately 38.8%) was less than the estimated fraction of type I hair cells in the chinchilla's crista central zone (approximately 60%), indicating that viable type I hair cells remained. Extensive lesions to afferent calyces were observed at 0.5-months, though stimulus-evoked modulation was intact at this post-administration time. Widespread compromise to calyx morphology and severe attenuation of stimulus-evoked afferent discharge modulation was found at 1 month post-administration, a condition that persisted in preparations examined through the 6-month post-administration interval. Spontaneous discharge was robust at all post-administration intervals. All calretinin-positive calyces had retracted

  19. Retracted: Effects of pro-inflammatory cytokines on mineralization potential of rat dental pulp stem cells

    NARCIS (Netherlands)

    Yang, X.; Walboomers, X.F.; Bian, Z.; Jansen, J.A.; Fan, M.

    2011-01-01

    The following article from the Journal of Tissue Engineering and Regenerative Medicine, 'Effects of Pro-inflammatory Cytokines on Mineralization Potential of Rat Dental Pulp Stem Cells' by Yang X, Walboomers XF, Bian Z, Jansen JA, Fan M, published online on 11 July 2011 in Wiley Online Library

  20. Thermonuclear device

    International Nuclear Information System (INIS)

    Tezuka, Masaru.

    1993-01-01

    Protrusions and recesses are formed to a vacuum vessel and toroidal magnetic coils, and they are engaged. Since the vacuum vessel is generally supported firmly by a rack or the like by support legs, the toroidal magnetic field coils can be certainly supported against tumbling force. Then, there can be attained strong supports for the toroidal magnetic field coils, in addition to support by wedges on the side of inboard and support by share panels on the side of outboard, capable of withstanding great electromagnetic forces which may occur in large-scaled next-generation devices. That is, toroidal magnetic field coils excellent from a view point of deformation and stress can be obtained, to provide a thermonuclear device of higher reliability. (N.H.)

  1. Thermonuclear device

    International Nuclear Information System (INIS)

    Oosaki, Osamu; Masuda, Kenju.

    1980-01-01

    Purpose: To provide excellent electric properties and high reliability in a thermonuclear device by improving a current collecting board connected to a coil device. Constitution: A current collecting board element perforated with an opening for enserting a connecting terminal is sized to be inserted into a plating tank, and is surface treated in the plating tank. Only the current collecting board element preferably surface treated is picked up. A plurality of such current collecting board elements are connected and welded to form a large current collecting board. In this manner, the current collecting board having several m 2 to several ten order m 2 in area can be obtained as preferably surface treated at the connecting terminal hole. The current collecting board element can be determined in shape with the existing facility without increasing the size of a surface treating tank. (Kamimura, M.)

  2. Thermonuclear device

    International Nuclear Information System (INIS)

    Yagi, Yasuomi; Takahashi, Ken; Hashimoto, Hiroshi.

    1984-01-01

    Purpose: To improve the plasma confining performances by bringing the irregular magnetic fields nearly to zero and decreasing the absolute value of the irregular magnetic fields at every positions. Constitution: The winding direction of a plurality of coil elements, for instance, double pan cake coils of toroidal coils in a torus type or mirror type thermonuclear device are reversed to each other in their laminating direction, whereby the irregular magnetic fields due to the coil-stepped portions in each toroidal coils are brought nearly to zero. This enables to bring the average irregular magnetic fields as a whole in the thermonuclear device nearly to zero, as well as, decrease the absolute value of the irregular magnetic fields in each positions. Thus, the plasma confining performances can be improved. (Moriyama, K.)

  3. "Distinvar" device

    CERN Multimedia

    CERN PhotoLab

    1965-01-01

    The alignment of one of the accelerator magnets being checked by the AR Division survey group. A "distinvar" device, invented by the group, using calibrated invar wires stretched between the fixed survey pillar (on the left) and a fixed point on the magnet. In two days it is thus possible to measure the alignment of the 100 magnets with an accuracy better than 1/10.

  4. Latching device

    Science.gov (United States)

    Ulrich, G. W. (Inventor)

    1975-01-01

    A latching device is suited for use in establishing a substantially motionless connection between a stationary receiver and a movable latching mechanism. The latching mechanism includes a pivotally supported restraining hook continuously urged into a capturing relationship with the receiver, characterized by a spring-biased pawl having a plurality of aligned teeth. The teeth are seated in the surface of the throat of the hook and positionable into restraining engagement with a rigid restraining shoulder projected from the receiver.

  5. Commercial considerations in tissue engineering.

    Science.gov (United States)

    Mansbridge, Jonathan

    2006-10-01

    Tissue engineering is a field with immense promise. Using the example of an early tissue-engineered skin implant, Dermagraft, factors involved in the successful commercial development of devices of this type are explored. Tissue engineering has to strike a balance between tissue culture, which is a resource-intensive activity, and business considerations that are concerned with minimizing cost and maximizing customer convenience. Bioreactor design takes place in a highly regulated environment, so factors to be incorporated into the concept include not only tissue culture considerations but also matters related to asepsis, scaleup, automation and ease of use by the final customer. Dermagraft is an allogeneic tissue. Stasis preservation, in this case cryopreservation, is essential in allogeneic tissue engineering, allowing sterility testing, inventory control and, in the case of Dermagraft, a cellular stress that may be important for hormesis following implantation. Although the use of allogeneic cells provides advantages in manufacturing under suitable conditions, it raises the spectre of immunological rejection. Such rejection has not been experienced with Dermagraft. Possible reasons for this and the vision of further application of allogeneic tissues are important considerations in future tissue-engineered cellular devices. This review illustrates approaches that indicate some of the criteria that may provide a basis for further developments. Marketing is a further requirement for success, which entails understanding of the mechanism of action of the procedure, and is illustrated for Dermagraft. The success of a tissue-engineered product is dependent on many interacting operations, some discussed here, each of which must be performed simultaneously and well.

  6. Erratum: Retraction Note to: Experimental and Simulation Studies on Grain Growth in TiC- and WC-Based Cermets During Liquid Phase Sintering

    Science.gov (United States)

    Shin, Soon-Gi

    2018-03-01

    This article [1] has been retracted at the request of the Editor-in-Chief. Concerns were raised regarding substantial duplications with previous articles published in other journals in which S.-G. Shin is one of the co-authors.

  7. Mouse macrophages completely lacking Rho (RhoA, RhoB and RhoC) have severe lamellipodial retraction defects, but robust chemotactic navigation and increased motility

    DEFF Research Database (Denmark)

    Koenigs, Volker; Jennings, Richard; Vogl, Thomas

    2014-01-01

    RhoA is thought to be essential for coordination of the membrane protrusions and retractions required for immune cell motility and directed migration. Whether the subfamily of Rho (Ras homolog) GTPases (RhoA, RhoB and RhoC) is actually required for the directed migration of primary cells is diffi...

  8. Tissue holding device for use during surgical procedure, has contact body with suction foot and suction mouth that is surrounded by rim, and suction pipe connected to suction chamber

    OpenAIRE

    Vonck, D.; Goossens, R.H.M.; Flipsen, S.F.J.; Jakimowicz, J.J.; Van der Putten, E.P.W.

    2009-01-01

    The device has a locking ring (5), a connector (6), and a contact body (1) with a suction foot and a suction mouth (8), where the mouth is surrounded by a rim (10), which is substantially located in a plane of the suction foot. A suction chamber (9) has a sieve-shaped inner wall (2) and a transparent side wall, and a suction pipe (11) is connected to the chamber.

  9. Building blocks of Collagen based biomaterial devices

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. Building blocks of Collagen based biomaterial devices. Collagen as a protein. Collagen in tissues and organs. Stabilizing and cross linking agents. Immunogenicity. Hosts (drugs). Controlled release mechanisms of hosts. Biodegradability, workability into devices ...

  10. Micro-Organ Device

    Science.gov (United States)

    Gonda, Steve R. (Inventor); Chang, Robert C. (Inventor); Starly, Binil (Inventor); Culbertson, Christopher (Inventor); Holtorf, Heidi L. (Inventor); Sun, Wei (Inventor); Leslie, Julia (Inventor)

    2013-01-01

    A method for fabricating a micro-organ device comprises providing a microscale support having one or more microfluidic channels and one or more micro-chambers for housing a micro-organ and printing a micro-organ on the microscale support using a cell suspension in a syringe controlled by a computer-aided tissue engineering system, wherein the cell suspension comprises cells suspended in a solution containing a material that functions as a three-dimensional scaffold. The printing is performed with the computer-aided tissue engineering system according to a particular pattern. The micro-organ device comprises at least one micro-chamber each housing a micro-organ; and at least one microfluidic channel connected to the micro-chamber, wherein the micro-organ comprises cells arranged in a configuration that includes microscale spacing between portions of the cells to facilitate diffusion exchange between the cells and a medium supplied from the at least one microfluidic channel.

  11. Pseudo-capsule “coffin effect”: How to prevent penile retraction after implant of three-piece inflatable prosthesis

    Directory of Open Access Journals (Sweden)

    Enrico Caraceni

    2014-06-01

    Full Text Available Objective: Following three-component implantation of a penile prosthesis, some patients are dissatisfied with their penile length. This may be due to the procedure by itself or pre-existing risk factors or psychological reasons. We supposed that formation of a restricted pseudo-capsule due to a late prosthesis activation can inhibit later system expansion. We aimed to identify the presence or absence of penile retraction after implant and to prevent it by immediate prosthesis activation after implantation. Material and methods. Forty-six patients operated with three-piece inflatable penile prosthesis (AMS 700 CX o LGX were enrolled. In 27 patients prosthesis was first activated four weeks after surgery (NEA group and in 19 patients prosthesis was activated immediately after surgery (DEA group. Length and girth of the penis was evaluated before (in DEA group and after the surgical procedure. Results. The average post implant dorsal length of the erect penis in group NEA was found 3.28 cm shorter than in group with early activation (DEA. In DEA group there was no lenght difference between pre-operative stretching (14.57 cm and post operative erection (14.98 cm. When early activation was not performed, the clinical result was a smaller penis in erect phase. Conclusion. Reduced lenght of the penis after implantation can be caused by the presence of a pseudo-capsule that limits the elongation of the prosthesis and of the penis (“coffin effect”. Timing of first activation seems to be the key in order to prevent the risk of penile retraction after implantation. Early activation is identified as the best measure to maintain the length of the pre implant erect penis after the prosthetic hydraulic implant.

  12. Maxillary anterior en masse retraction using different antero-posterior position of mini screw: a 3D finite element study

    Directory of Open Access Journals (Sweden)

    Zohreh Hedayati

    2016-10-01

    Full Text Available Abstract Background Nowadays, mini screws are used in orthodontic tooth movement to obtain maximum or absolute anchorage. They have gained popularity among orthodontists for en masse retraction of anterior teeth after first premolar extraction in maximum anchorage cases. The purpose of this study was to determine the type of anterior tooth movement during the time when force was applied from different mini screw placements to the anterior power arm with various heights. Methods A finite element method was used for modeling maxillary teeth and bone structure. Brackets, wire, and hooks were also designed for modeling. Two appropriate positions for mini screw in the mesial and distal of the second premolar were designed as fixed nodes. Forces were applied from the mini screw to four different levels of anterior hook height: 0, 3, 6, and 9 mm. Initial tooth movement in eight different conditions was analyzed and calculated with ANSYS software. Results Rotation of anterior dentition was decreased with a longer anterior power arm and the mesial placement of the mini screw. Bodily movements occurred with the 9-mm height of the power arm in both mini screw positions. Intrusion or extrusion of the anterior teeth segment depended on the level of the mini screw and the edge of the power arm on the Z axis. Conclusions According to the findings of this study, the best control in the sagittal plane during anterior en masse retraction was achieved by mesial placement of the mini screw and the 9-mm height of the anterior power arm. Where control in the vertical plane was concerned, distal placement of the mini screw with the 6-mm power arm height had minimum adverse effect on anterior dentition.

  13. Effect of conventional and experimental gingival retraction solutions on the tensile strength and inhibition of polymerization of four types of impression materials

    Directory of Open Access Journals (Sweden)

    Sérgio Sábio

    2008-08-01

    Full Text Available In the present study, two types of tests (tensile strength test and polymerization inhibition test were performed to evaluate the physical and chemical properties of four impression materials [a polysulfide (Permlastic, a polyether (Impregum, a condensation silicone (Xantopren and a polyvinylsiloxane (Aquasil ,3; when polymerized in contact with of one conventional (Hemostop and two experimental (Vislin and Afrin gingival retraction solutions. For the tensile strength test, the impression materials were mixed and packed into a steel plate with perforations that had residues of the gingival retraction solutions. After polymerization, the specimens were tested in tensile strength in a universal testing machine. For the polymerization inhibition test, specimens were obtained after taking impressions from a matrix with perforations that contained 1 drop of the gingival retraction solutions. Two independent examiners decided on whether or not impression material remnants remained unpolymerized, indicating interference of the chemical solutions. Based on the analysis of the results of both tests, the following conclusions were reached: 1. The tensile strength of the polysulfide decreased after contact with Hemostop and Afrin. 2. None of the chemical solutions inhibited the polymerization of the polysulfide; 3. The polyether presented lower tensile strength after polymerization in contact with the three gingival retraction agents; 4. The polyether had its polymerization inhibited only by Hemostop; 5. None of the chemical solutions affected the tensile strength of the condensation silicone; 6. Only Hemostop inhibited the polymerization of the condensation silicone; 7. The polyvinylsiloxane specimens polymerized in contact with Hemostop had significantly lower tensile strength; 8. Neither of the chemical solutions (Afrin and Vislin affected the tensile strength of the polyvinylsiloxane and the condensation silicone; 9. Results of the tensile strength

  14. Tendon retraction with rotator cuff tear causes a decrease in cross-sectional area of the supraspinatus muscle on magnetic resonance imaging.

    Science.gov (United States)

    Fukuta, Shoji; Tsutsui, Takahiko; Amari, Rui; Wada, Keizo; Sairyo, Koichi

    2016-07-01

    Muscle atrophy and fatty degeneration of the rotator cuff muscles have been reported as negative prognostic indicators after rotator cuff repair. Although the Y-shaped view is widely used for measuring the cross-sectional area of the supraspinatus muscle, the contribution of retraction of the torn tendon as well as muscle atrophy must be considered. The purpose of this study was to clarify the relationship between cross-sectional area and tendon retraction or size of the tear. This study included 76 shoulders that were evaluated arthroscopically for the presence and size of tears. Cross-sectional areas of rotator cuff muscles were measured from the Y-shaped view to 3 more medial slices. The occupation ratio and tangent sign were evaluated on the Y-shaped view. The retraction of torn tendon was also measured on the oblique coronal images. On the Y-shaped view, the cross-sectional area of the supraspinatus and the occupation ratio decreased in conjunction with the increase in tear size. A significant decrease in cross-sectional area was noted only in large and massive tears on more medial slices from the Y-shaped view. Significant decreases in the cross-sectional area of the infraspinatus were observed in large and massive tears on all images. A negative correlation was found between tendon retraction and cross-sectional area, which was strongest on the Y-shaped view. To avoid the influence of retraction of the supraspinatus tendon, sufficient medial slices from the musculotendinous junction should be used for evaluation of muscle atrophy. Copyright © 2016 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

  15. Comparison of retraction phenomenon and BI-RADS-US descriptors in differentiating benign and malignant breast masses using an automated breast volume scanner.

    Science.gov (United States)

    Zheng, Feng-Yang; Yan, Li-Xia; Huang, Bei-Jian; Xia, Han-Sheng; Wang, Xi; Lu, Qing; Li, Cui-Xian; Wang, Wen-Ping

    2015-11-01

    To compare the diagnostic values of retraction phenomenon in the coronal planes and descriptors in the Breast Imaging Reporting and Data System-Ultrasound (BI-RADS-US) lexicon in differentiating benign and malignant breast masses using an automated breast volume scanner (ABVS). Two hundred and eight female patients with 237 pathologically proven breast masses (120 benign and 117 malignant) were included in this study. ABVS was performed for each mass after preoperative localization by conventional ultrasonography (US). Multivariate logistic regression analysis was performed to assess independent variables for malignancy prediction. Diagnostic performance was evaluated through the receiver operating characteristic (ROC) curve analysis. Retraction phenomenon (odds ratio [OR]: 76.70; 95% confidence interval [CI]: 12.55, 468.70; P<0.001) was the strongest independent predictor for malignant masses, followed by microlobulated margins (OR: 55.87; 95% CI: 12.56, 248.44; P<0.001), angular margins (OR: 36.44; 95% CI: 4.55, 292.06; P=0.001), calcifications (OR: 5.53; 95% CI: 1.34, 22.88; P=0.018,) and patient age (OR: 1.10; 95% CI: 1.03, 1.17; P=0.004). Mass shape, orientation, echo pattern, indistinct margins, spiculated margins, and mass size were not significantly associated with breast malignancy. Area under the ROC curve (Az) for microlobulated margins and retraction phenomenon was higher than that for other significant independent predictors. Az, sensitivity, and specificity were 0.877 (95% CI: 0.829, 0.926) and 0.838 (95% CI: 0.783, 0.892), 82.9% and 70.1%, and 92.5% and 98.3%, respectively, for microlobulated margins and retraction phenomenon. Retraction phenomenon and microlobulated margins have high diagnostic values in the differentiation of benign and malignant breast masses using an ABVS. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  16. Damping device

    International Nuclear Information System (INIS)

    Banks, E.L. Jr.; Dowell, T.P.

    1976-01-01

    The description is given of a damper which includes a pair of telescopic components interconnected by relative linear movement one in relation to the other, by a screw and ball nut device, with a braking surface on one of the components, a brake engaging the braking surface, an inertia mass entrained by the other components, non-deformable and distinct brake actuating gear, independently mobile in relation to the other braking system and fixed and controlled by the inertia mass, positively to engage the braking surface. This damper is for retaining the parts of a nuclear power station so that can withstand earthquakes [fr

  17. Thermonuclear device

    International Nuclear Information System (INIS)

    Inoue, Toyokazu; Murata, Toru.

    1983-01-01

    Purpose: To shield superconducting coils for use in the generation of magnetic field against neutron irradiation thereby preventing tritium contamination. Constitution: The thermonuclear device comprises, in its inside, a vacuum container for containing plasmas, superconducting coils disposed to the outside of the vacuum container and neutron absorbers disposed between the super-conducting coils and the vacuum container. since neutrons issued from the plasma are absorbed by neutron absorbers and not irradiated to the superconducting coils, generation of tritium due to the reaction between 3 He in the liquid helium as the coolants for the super-conducting coils and the neutrons is prevented. (Aizawa, K.)

  18. Strainer device

    International Nuclear Information System (INIS)

    Mokuya, Kenji.

    1975-01-01

    Object: To provide a strainer device, which is adapted to facilitate flushing and is particularly suited for installation in the cooling system of a liquid metal cooled fast breeding reactor. Structure: A casing accommodating a strainer and a blind plate for the selection of a flow path is provided at a suitable portion of the duct line. The blind plate is adapted to be rotated by an opening and closing means consisting of a rod. bellows, shaft and so forth. At the time of flushing, the duct line is sealed by the blind plate. (Nakamura, S.)

  19. Soft tissue changes following extraction vs. nonextraction orthodontic fixed appliance treatment: a systematic review and meta-analysis.

    Science.gov (United States)

    Konstantonis, Dimitrios; Vasileiou, Dimitrios; Papageorgiou, Spyridon N; Eliades, Theodore

    2018-02-26

    The aim of this systematic review was to assess the effect of systematic extraction protocols during orthodontic fixed appliance treatment on the soft tissue profile of human patients. Nine databases were searched until December 2016 for controlled clinical studies including premolar extraction or nonextraction treatment. After elimination of duplicate studies, data extraction, and risk-of-bias assessment according to the Cochrane guidelines, random-effects meta-analyses of mean differences (MD) or standardized mean differences (SMD) and their 95% CIs were performed, followed by subgroup, meta-regression, and sensitivity analyses. Extraction treatment was associated with increased lower lip retraction (24 studies; 1,456 patients; MD = 1.96 mm), upper lip retraction (21 studies; 1,149 patients; MD = 1.26 mm), nasolabial angle (21 studies; 1,089 patients; MD = 4.21°), soft-tissue profile convexity (six studies; 408 patients; MD = 1.24°), and profile pleasantness (three studies; 249 patients; SMD = 0.41). Patient age, extraction protocol, and amount of upper incisor retraction during treatment were significantly associated with the observed extraction effects, while the quality of evidence was very low in all cases due to risk of bias, baseline confounding, inconsistency, and imprecision. Although tooth extractions seem to affect patient profile, existing studies are heterogenous and no consistent predictions of profile response can be made. © 2018 Eur J Oral Sci.

  20. Peripheral tissue oximetry

    DEFF Research Database (Denmark)

    Hyttel-Sorensen, Simon; Hessel, Trine Witzner; Greisen, Gorm

    2014-01-01

    Estimation of regional tissue oxygenation (rStO2) by near infrared spectroscopy enables non-invasive end-organ oxygen balance monitoring and could be a valuable tool in intensive care. However, the diverse absolute values and dynamics of different devices, and overall poor repeatability of measur......Estimation of regional tissue oxygenation (rStO2) by near infrared spectroscopy enables non-invasive end-organ oxygen balance monitoring and could be a valuable tool in intensive care. However, the diverse absolute values and dynamics of different devices, and overall poor repeatability......, and response to changing oxygenation by the down slope of rStO2 during vascular occlusion in the respective arm. 10 healthy adults, 21-29 years old, with double skinfolds on the forearm less than 10 mm participated. The median rStO2 was 70.7% (interquartile range (IQR) 7.7%), 68.4% (IQR 8.4%), and 64.6% (IQR 4...

  1. Ostomy creation with fewer sutures using tissue adhesives (cyanoacrylates) in inflammatory bowel disease: a pilot study.

    Science.gov (United States)

    Uchino, M; Ikeuchi, H; Bando, T; Sasaki, H; Chohno, T; Horio, Y; Takesue, Y

    2018-03-01

    Introduction Fistula formation around the ostomy site is a stoma-related complication often requiring surgical intervention. This complication may be caused by sutures or may develop as a complication of inflammatory bowel disease. Before conducting a clinical trial, we set out to investigate the safety of ostomy creation with fewer sutures using tissue adhesives in this pilot study. Methods Patients with inflammatory bowel disease who required surgery with ostomy creation at the Hyogo College of Medicine between January 2014 and December 2015 were enrolled. Safety was assessed by evaluating the incidence of stoma-related complications. Ostomy was restricted to loop ileostomy and was created with two sutures and tissue adhesives. Results A total of 14 patients were enrolled. Mean body mass index was 18.9 ± 2.0 kg/m 2 . There were no cases of ostomy retraction and no severe adverse events were observed. Conclusions This pilot study demonstrates that ostomy creation using tissue adhesives is safe. Although retraction and adverse events were not observed, even in patients with inflammatory bowel disease who generally exhibit delayed wound healing, the body mass index was extremely low in this series. This study does not strongly recommend ostomy creation with tissue adhesives; further studies are needed to clarify the efficacy and safety of the procedure.

  2. Scalable devices

    KAUST Repository

    Krüger, Jens J.

    2014-01-01

    In computer science in general and in particular the field of high performance computing and supercomputing the term scalable plays an important role. It indicates that a piece of hardware, a concept, an algorithm, or an entire system scales with the size of the problem, i.e., it can not only be used in a very specific setting but it\\'s applicable for a wide range of problems. From small scenarios to possibly very large settings. In this spirit, there exist a number of fixed areas of research on scalability. There are works on scalable algorithms, scalable architectures but what are scalable devices? In the context of this chapter, we are interested in a whole range of display devices, ranging from small scale hardware such as tablet computers, pads, smart-phones etc. up to large tiled display walls. What interests us mostly is not so much the hardware setup but mostly the visualization algorithms behind these display systems that scale from your average smart phone up to the largest gigapixel display walls.

  3. Thermonuclear device

    International Nuclear Information System (INIS)

    Honda, Takuro; Maki, Koichi.

    1997-01-01

    The present invention provides a thermonuclear device, in which integrity of a measuring device is kept, the reactor wall temperature and wear of armour materials are monitored accurately even under intense radiation rays, so that the flow rate of coolants and plasma power can be controlled by using the signals. Infrared rays generated from the surface of the armour materials disposed on a first wall are detected to measure the reactor wall temperature. Coolant flow rate and plasma power are controlled based on the obtained reactor wall temperature. In addition, infrared rays generated from the back of the armour materials are detected to obtain the surface temperature in order to avoid intense radiation rays from plasmas. The coolant flow rate and the plasma power are controlled based on the obtained temperature on the surface of the reactor thereby controlling the temperature of the first wall and the armour material to 300degC or lower in a case of the first wall made of stainless steel and 1000degC or lower in a case of the armour material made of graphite. (I.S.)

  4. Thermonuclear device

    International Nuclear Information System (INIS)

    Kuriyama, Masaaki; Yamamoto, Masahiro; Furuyama, Masayuki; Saito, Ryusei.

    1981-01-01

    Purpose: To enable the efficient and rapid cooling of a vacuum vessel by cooling with gas when the temperature of the vacuum vessel is higher than the boiling point of water and cooling with water when the temperature is lower than the boiling point of water. Constitution: A cooling pipe is provided through an insulating pipe on the outer periphery of a vacuum vessel. The cooling pipe communicates through a cooling gas valve and a coolant valve with a cooling gas supply device and a coolant supply device, and a heat exchanger is disposed at the pipe. When the vessel is higher than the boiling point of the coolant the coolant valve is closed and the cooling gas valve is opened and gas is supplied to cool the vessel. The gas is recoverd through a heat exchanger. On the other hand, when the temperature of vessel is lower than the boiling point of the coolant, the gas valve is closed, the coolant valve is opened, and the vessel is cooled with coolant. The vacuum vessel can be cooled for short time employing both the gas and the coolant together. (Yoshino, Y.)

  5. Thermonuclear device

    International Nuclear Information System (INIS)

    Takano, Hirohisa; Nakamoto, Kazunari; Hanai, Satoshi.

    1984-01-01

    Purpose: To provide coils of high mechanical strength for use at the center of a torus type thermonuclear device. Constitution: A plurality of copper plates having cooling holes and bolt holes and insulation paper sheets of the same shape are prepared. The copper plate is different from the insulation paper sheet only in that the position-phase angle of the opening portion is larger by 15 - 30 0 . The copper plates and the insulation paper sheets are alternately stacked by a required number of turns while displacing the angle, and then clamped by bolts to form a mechanically strong coil with no metallurgical joining. Further, since the insulation paper sheets are not present in the radial direction and only one insulation paper sheet is inserted for each turn in the direction of the coil height, the space occupied by the coil can be decreased. According to this invention, the magnetic flux density at the center of the device can be increased as compared with the conventional case to thereby apply a higher voltage on the side of plasmas. (Moriyama, K.)

  6. Irradiation device

    International Nuclear Information System (INIS)

    Suzuki, Toshimitsu.

    1989-01-01

    In an irradiation device for irradiating radiation rays such as electron beams to pharmaceuticals, etc., since the distribution of scanned electron rays was not monitored, the electron beam intensity could be determined only indirectly and irradiation reliability was not satisfactory. In view of the above, a plurality of monitor wires emitting secondary electrons are disposed in the scanning direction near a beam take-out window of a scanning duct, signals from the monitor wires are inputted into a display device such as a cathode ray tube, as well as signals from the monitor wires at the central portion are inputted into counting rate meters to measure the radiation dose as well. Since secondary electrons are emitted when electron beams pass through the monitor wires and the intensity thereof is in proportion with the intensity of incident electron beams, the distribution of the radiation dose can be monitored by measuring the intensity of the emitted secondary electrons. Further, uneven irradiation, etc. can also be monitored to make the radiation of irradiation rays reliable. (N.H.)

  7. Practical microwave electron devices

    CERN Document Server

    Meurant, Gerard

    2013-01-01

    Practical Microwave Electron Devices provides an understanding of microwave electron devices and their applications. All areas of microwave electron devices are covered. These include microwave solid-state devices, including popular microwave transistors and both passive and active diodes; quantum electron devices; thermionic devices (including relativistic thermionic devices); and ferrimagnetic electron devices. The design of each of these devices is discussed as well as their applications, including oscillation, amplification, switching, modulation, demodulation, and parametric interactions.

  8. Thermonuclear device

    International Nuclear Information System (INIS)

    Furuyama, Masayuki.

    1979-01-01

    Purpose: To provide the subject device wherein a conductive short-circuiting ring is installed in the vicinity of the bonded part of bellows and thick portion of vacuum vessel in the small circumferential direction of torus, thereby to reduce the electromagnetic force generated at the bellows. Constitution: A conductive short-circuiting ring is provided in the vicinity of the connected part of a thick portion and bellows portion. By this organization, a saddle type current generated at the thick portion by a vertical magnetic field flows through the short-circuiting ring because the resistance at a part where the short-circuiting ring is provided is reduced, and the current flowing through the bellows is remarkably reduced. For this reason, the electromagnetic force generated at the bellows is reduced thereby to prevent the bellows from being destroyed by the electromagnetic force. (Yoshihara, H.)

  9. Electrophoresis device

    Science.gov (United States)

    Rhodes, P. H.; Snyder, R. S. (Inventor)

    1982-01-01

    A device for separating cellular particles of a sample substance into fractionated streams of different cellular species includes a casing having a distribution chamber, a separation chamber, and a collection chamber. The electrode chambers are separated from the separation chamber interior by means of passages such that flow variations and membrane variations around the slotted portion of the electrode chamber do not enduce flow perturbations into the laminar buffer curtain flowing in the separation chamber. The cellular particles of the sample are separated under the influence of the electrical field and the separation chamber into streams of different cellular species. The streams of separated cells enter a partition array in the collection chamber where they are fractionated and collected.

  10. Thermonuclear device

    International Nuclear Information System (INIS)

    Suzuki, Shohei

    1988-01-01

    Purpose: To obtain high voltage withstanding current introduction terminals not suffering from the effects of the reduction in the creeping voltage withstanding property by the application of magnetic fields. Constitution: This invention concerns a current introduction terminal for supplying electric current to coils for use in a thermonuclear device, etc. The conductor of the current introduction terminal on the side of vacuum is completely covered with solid insulator. This can eliminate the portion of securing the creeping withstanding voltage. The voltage withstanding characteristics of the solid insulator covering the portion of the conductor on the side of vacuum has a constant value irrespective of the atmosphere or the absence or presence of magnetic fields. Accordingly, the voltage withstanding characteristics of the current introduction terminal on the side of vacuum are determined by the property of the solid insulator, which is not reduced by the application of magnetic fields. (Ikeda, J.)

  11. Safety device of thermonuclear device

    International Nuclear Information System (INIS)

    Aoki, Isao; Ueda, Shuzo; Seki, Yasushi; Sakurai, Akiko; Kasahara, Fumio; Obara, Atsushi; Yamauchi, Michinori.

    1997-01-01

    The present invention provides a safety device against an event of intrusion of coolants in a vacuum vessel. Namely, a coolant supply system comprises cooling tubes for supplying coolants to main reactor structure components including a vacuum vessel. A detection means detects leakage of coolants in the vacuum vessel. A coolant supply control means controls the supply of coolants to the main reactor structural components based on the leakage detection signals of the detection means. A stagnated material discharging means discharges stagnated materials in the main reactor structural components caused by the leakage of coolants. The leakage of coolants (for example, water) in the vacuum vessel can thus be detected by the water detection device in the vacuum vessel. A control value of a coolant supply means is closed by the leakage detection signals. The supply of coolants to the main reactor structural components is restricted to suppress the leakage. The stagnated materials are discharged to a tank by way of a water draining valve. (I.S.)

  12. Digital lingual orthodontics and temporary anchorage devices for efficient biomechanics

    Directory of Open Access Journals (Sweden)

    Pravin Shetty

    2016-01-01

    Full Text Available Adult patients seeking orthodontic treatment at all times present with an esthetic demand even during treatment. The lingual orthodontics, apart from its esthetic values, also presents several other advantages. Currently, it has become a complete system in itself, starting from an accurate diagnosis, treatment protocol, and laboratory procedure to placement of the appliance in the patient′s mouth. With the advent of computer-aided design/computer-aided manufacturing system, the lingual orthodontics is more evolved and made ease operators in respect to more efficient mechanics and reduced archwire adjustments. The present article presents two cases to show the efficiency of lingual orthodontics with temporary anchorage devices and anterior retraction hook.

  13. Thermonuclear device

    International Nuclear Information System (INIS)

    Suzuki, Shohei.

    1980-01-01

    Purpose: To improve the plasma confining efficiency in a thermonuclear device having magnet coils using super-conducting wires by decreasing the uneven magnetic field resulted from current supply terminals and wirings. Constitution: Current introduction terminals of magnet coils using superconducting wires are short circuitted with a superconducting short circuit wire. Upon supplying current to the coils, the resistance of the coils is rendered superconductive and the resistance of the short circuit wire is rendered normally conductive heated by a heater and the switch is closed. In this case, most parts of the current are flown through the resistance of the coils and the switch is opened when the current arrives at a predetermined value to render the resistance of the short circuit wire superconductive. Then, the current transfers from the thyristor power source to the resistance of the short circuit wire, whereby the resistance of the coils and that of the short circuit wire from a permanent current loop. In this conditions, since current flows through the short circuit wire and the coils and not to the current introduction terminals, no uniform magnetic field is generated. (Kawakami, Y.)

  14. Reluctance device

    International Nuclear Information System (INIS)

    Claridge, A.N.; Smith, A.J.

    1983-01-01

    A reluctance device comprises two or more phases, each of which has a rotor mounted for rotation within a tubular member and an annular stator positioned externally of the tubular member. The rotor and the internal surface of the tubular member are each provided with aligned, axially spaced apart annular arrays of teeth, the teeth on the rotor confronting those on the tubular member in radially spaced apart relationship. The stator encloses a coil which, when electrically energised, creates a plurality of magnetic flux paths each of which extends radially between the rotor and stator via the confronting teeth and the tubular member, and axially along both the rotor and the portion of the stator located radially outwardly of the coil. The portion of the tubular member intermediate the teeth thereon is provided with a non-magnetic insert in order to resist the axial passage of magnetic flux therethrough. In one of the claims, the tubular member comprises a portion of a nuclear reactor which is adapted to contain a reactor control rod, the rotor constituting a portion of the drive mechanism for the control rod contained in operation within the tubular member. (author)

  15. Protection device for a thermonuclear device

    International Nuclear Information System (INIS)

    Kawashima, Shuichi.

    1986-01-01

    Purpose: To exactly detect the void coefficients of coolants even under high magnetic fields thereby detect the overheat of a thermonuclear device at an early stage. Constitution: The protecting device of this invention comprises a laser beam generation device, a laser beam detection device and an accident detection device. The laser generation device always generates laser beams, which are permeated through coolants and detected by the laser beam detection device, the optical amount of which is transmitted to the accident detection device. The accident detection device judges the excess or insufficiency of the detected optical amount with respect to the optical amount of the laser beams under the stationary state as a reference and issues an accident signal. Since only the optical cables that do not undergo the effect of the magnetic fields are exposed to high magnetic fields in the protection device of this invention, a high reliability can be maintained. (Kamimura, M.)

  16. 75 FR 70112 - Medical Devices; General and Plastic Surgery Devices; Classification of Non-Powered Suction...

    Science.gov (United States)

    2010-11-17

    .... FDA-2010-N-0513] Medical Devices; General and Plastic Surgery Devices; Classification of Non-Powered... risks. Adverse tissue reaction Material degradation Improper function of suction apparatus (e.g., reflux.... Material degradation Section 8. Stability and Shelf Life. [[Page 70113

  17. Retraction notice to "On a general class of regular rotating black holes based on a smeared mass distribution" [Phys. Lett. B 743 (2015) 492-502

    Science.gov (United States)

    Larranaga, Alexis; Cardenas-Avendano, Alejandro; Torres, Daniel Alexdy

    2015-07-01

    This article has been retracted: please see Elsevier Policy on Article Withdrawal. This article has been retracted at the request of the Editor-in-Chief. The authors have plagiarized part of a paper that had already appeared in Adv. High Energy Physics, P. Nicolini, A. Orlandi, E. Spallucci, The Final Stage of Gravitationally Collapsed Thick Matter Layers, Vol 2013 (2013), Article ID 812084 http://dx.doi.org/10.1155/2013/812084. One of the conditions of submission of a paper for publication is that authors declare explicitly that their work is original and has not appeared in a publication elsewhere. Re-use of any data should be appropriately cited. As such this article represents a severe abuse of the scientific publishing system. The scientific community takes a very strong view on this matter and apologies are offered to readers of the journal that this was not detected during the submission process.

  18. Ocular motility disturbances (Duane retraction syndrome and double elevator palsy with congenital heart disease, a rare association with Goldenhar syndrome-A case report

    Directory of Open Access Journals (Sweden)

    Verma Manju

    1992-01-01

    Full Text Available This report is a case of a 4 year old male child who was admitted for meningitis. On clinical examination he was diagnosed as a case of oculo-suriculo-vertebral dysplasia with congenital heart disease, i.e., tetralogy of Fallots besides his presenting picture of meningitis. During his ophthalmic checkup for the conspicuous presence of epibulbar dermoid, he was discovered to have upper lid coloboma, double elevator palsy, and Grade 1 Duane retraction syndrome in his right eye while the pathognomic feature, a dermolipoma, was present in the left eye. The oculo-auriculo-vertebral dysplasia, as described by Goldenhar, is a disease complex of structures developed from the Ist and IInd branchial arch. The important feature of this case is the bilateral involvement of the disease complex over and above the presence of ocular motility disorders--Duane retraction syndrome and double elevator palsy.

  19. RETRACTED: Magneto transport measurements to unravel the epitaxial strain control of magnetic anisotropy in Ga1-xMnxAs/InGaAs layers

    Science.gov (United States)

    Dehbaoui, Mourad; Dumas, Richard; Hung, Tran Q.; Kamara, Souleymane; Sadowski, Janusz; Domagala, Jaroslaw Z.; Terki, Férial; Charar, Salam

    2018-04-01

    This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/about/our-business/policies/article-withdrawal). This article has been retracted at the request of the Editor-in-Chief. The article duplicates information reported in a paper that has already been published in Advanced Materials Letters, volume 8, 2017 pages 1188-1192. DOI: 10.5185/amlett.2017.1525. One of the conditions of submission of a paper for publication is that the corresponding author declares explicitly that the paper is not under consideration for publication elsewhere and should inform the co-authors of the submission. As such this article represents a severe abuse of the scientific publishing system. The scientific community takes a very strong view on this matter and apologies are offered to readers of the journal that this was not detected during the submission process.

  20. RETRACTED: Study on the magnetic viscosity of Nd45Pr15Fe30−xCoxAl10 (x=0, 10) bulk amorphous Alloys

    International Nuclear Information System (INIS)

    Qi, Guoquan; Fan, Haiping; Wu, Gang; Song, Shengyin; Wei, Dong; Bai, Qiang

    2013-01-01

    This article has been retracted: please see Elsevier Policy on Article Withdrawal ( (http://www.elsevier.com/locate/withdrawalpolicy)). This article has been retracted at the request of the Author. The authors have used experimental data of which the ownership is with the Shanghai university. One of the conditions of submission of a paper for publication is that authors declare explicitly that their work is original and has not appeared in a publication elsewhere. In the article the authors have used, without permission, experimental data owned by Shanghai university. The authors apologise for this error on their part. The scientific community takes a very strong view on this matter and apologies are offered to readers of the journal that this was not detected during the submission process

  1. RETRACTED: Development of electrode carbon paste/molecularly imprinted polymer (MIP with methacrylic acid as monomer to analyze glucose by potentiometry

    Directory of Open Access Journals (Sweden)

    Miratul Khasanah

    Full Text Available This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy.This article has been retracted at the request of the Editors-in-Chief.After a thorough investigation, the Editors have concluded that the acceptance of this article was based upon the positive advice of two illegitimate reviewer reports. The reports were submitted from email accounts which were provided to the journal as suggested reviewers during the submission of the article. Although purportedly real reviewer accounts, the Editors have concluded that these were not of appropriate, independent reviewers.This manipulation of the peer-review process represents a clear violation of the fundamentals of peer review, our publishing policies, and publishing ethics standards. Apologies are offered to the reviewers whose identities were assumed and to the readers of the journal that this deception was not detected during the submission process.

  2. MiR-206 functions as a tumor suppressor and directly targets K-Ras in human oral squamous cell carcinoma [Retraction

    Directory of Open Access Journals (Sweden)

    Lin FO

    2016-10-01

    Full Text Available The Editor-in-Chief and Publisher of OncoTargets and Therapy have been alerted to unacceptable levels of duplication with another published paper: Zhang D, Ni Z, Xu X, and Xiao J. MiR-32 Functions as a Tumor Suppressor and Directly Targets EZH2 in Human Oral Squamous Cell Carcinoma. Medical Science Monitor. 20:2527–2535, 2014.Accordingly, we retract Lin FO, Yao LJ, Xiao J, Liu DF, and Ni ZY. MiR-206 functions as a tumor suppressor and directly targets K-Ras in human oral squamous cell carcinoma. OncoTargets and Therapy. 2014;7:1583–1591.This Retraction relates to 

  3. A pneumatic device for rapid loading of DNA sequencing gels.

    Science.gov (United States)

    Panussis, D A; Cook, M W; Rifkin, L L; Snider, J E; Strong, J T; McGrane, R M; Wilson, R K; Mardis, E R

    1998-05-01

    This work describes the design and construction of a device that facilitates the loading of DNA samples onto polyacrylamide gels for detection in the Perkin Elmer/Applied Biosystems (PE/ABI) 373 and 377 DNA sequencing instruments. The device is mounted onto the existing gel cassettes and makes the process of loading high-density gels less cumbersome while the associated time and errors are reduced. The principle of operation includes the simultaneous transfer of the entire batch of samples, in which a spring-loaded air cylinder generates positive pressure and flexible silica capillaries transfer the samples. A retractable capillary array carrier allows the delivery ends of the capillaries to be held up clear of the gel during loader attachment on the gel plates, while enabling their insertion in the gel wells once the device is securely mounted. Gel-loading devices capable of simultaneously transferring 72 samples onto the PE/ABI 373 and 377 are currently being used in our production sequencing groups while a 96-sample transfer prototype undergoes testing.

  4. Two Blades-Up Runs Using the JetStream Navitus Atherectomy Device Achieve Optimal Tissue Debulking of Nonocclusive In-Stent Restenosis: Observations From a Porcine Stent/Balloon Injury Model.

    Science.gov (United States)

    Shammas, Nicolas W; Aasen, Nicole; Bailey, Lynn; Budrewicz, Jay; Farago, Trent; Jarvis, Gary

    2015-08-01

    To determine the number of runs with blades up (BU) using the JetStream Navitus to achieving optimal debulking in a porcine model of femoropopliteal artery in-stent restenosis (ISR). In this porcine model, 8 limbs were implanted with overlapping nitinol self-expanding stents. ISR was treated initially with 2 blades-down (BD) runs followed by 4 BU runs (BU1 to BU4). Quantitative vascular angiography (QVA) was performed at baseline, after 2 BD runs, and after each BU run. Plaque surface area and percent stenosis within the treated stented segment were measured. Intravascular ultrasound (IVUS) was used to measure minimum lumen area (MLA) and determine IVUS-derived plaque surface area. QVA showed that plaque surface area was significantly reduced between baseline (83.9%±14.8%) and 2 BD (67.7%±17.0%, p=0.005) and BU1 (55.4%±9.0%, p=0.005) runs, and between BU1 and BU2 runs (50.7%±9.7%, patherectomy. JetStream Navitus achieved optimal tissue debulking after 2 BD and 2 BU runs with no further statistical gain in debulking after the BU2 run. Operators treating ISR with JetStream Navitus may be advised to limit their debulking to 2 BD and 2 BU runs to achieve optimal debulking. © The Author(s) 2015.

  5. Retraction: a descriptive study of a manual therapy intervention within a randomised controlled trial for hamstring and lower limb injury prevention

    Directory of Open Access Journals (Sweden)

    Hoskins Wayne

    2011-10-01

    Full Text Available Abstract The journal has been informed by its publisher BioMed Central that contrary to the statement in this article [Wayne Hoskins, Henry Pollard, Chiropractic & Osteopathy 2010, 18:23], they have been advised by the authors' institution Macquarie University, that its Human Research Ethics Committee did not approve this study. Because the study was conducted without institutional ethics committee approval it has been retracted.

  6. Retraction: On the origin of power-law distributions in systems with constrained phase space [Condens. Matter Phys., 2013, vol. 16, 43802

    Directory of Open Access Journals (Sweden)

    Editorial Board

    2014-03-01

    Full Text Available The article Condens. Matter Phys., 2013, vol. 16, 43802 ( DOI:10.5488/CMP.16.43802 has been retracted by the decision of the Editorial Board. There is a significant overlap with an article: Phys. Rev. E, 2006, vol. 74, 036120 ( DOI:10.1103/PhysRevE.74.036120. Appologies are offered to readers of the journal that this was not detected during the submission process.

  7. Retraction Note to: Compensatory role of the NBCn1 sodium/bicarbonate cotransporter on Ca2+-induced mitochondrial swelling in hypertrophic hearts.

    Science.gov (United States)

    Vargas, Lorena A; Velasquez, Fernanda Carrizo; Alvarez, Bernardo V

    2018-04-18

    The authors have retracted this article [1] because of modifications in the control lanes of Figs. 2a and 8a of the COX1 blot obtained for 18-week-old rats (rotation, horizontal flipping and re-use of the control lanes for the 35-week-old rats blot). In light of the concerns raised, the conclusions drawn in this article cannot be relied upon.

  8. The volume of fluid injected into the tissue expander and the tissue expansion

    Directory of Open Access Journals (Sweden)

    Mahmood Omranifard

    2014-01-01

    Full Text Available Background: Replacement of the lost tissue is the major concerns of the plastic surgeons. Expanded area should be coherent with the surrounding tissue. Tissue expansion technique is the reforming methods the skin tissue scarcities. Several methods for tissue expansion are available; including usage of silicon balloon and injecting fluid into the tissue expander. Materials and Methods: In a clinical trial study, 35 patients, with burn scars, in the face, skull and neck area were studied. We provided a tissue expander device with capacities of 125, 250 and 350cc. Fluid was injected inside the device, 3 consecutive weeks with 1-week interval. After 3 months the device was set out and the tissue expansion was measured using a transparent board and the results were analyzed. Multiple regression was done by SPSS 20 to analyze the data. Results: Regression model showed Skin expansion was positively correlated with the volume of the injected fluid. For each centimeter square of skin expansion, about 6-8 ml of fluid must be injected. Conclusion: Correction of skin defects resulting from burning scar is possible using tissue expanders. The tissue expansion is correlated with the amount of the injected fluid.

  9. Progress and Prospects in Stretchable Electroluminescent Devices

    Directory of Open Access Journals (Sweden)

    Wang Jiangxin

    2017-03-01

    Full Text Available Stretchable electroluminescent (EL devices are a new form of mechanically deformable electronics that are gaining increasing interests and believed to be one of the essential technologies for next generation lighting and display applications. Apart from the simple bending capability in flexible EL devices, the stretchable EL devices are required to withstand larger mechanical deformations and accommodate stretching strain beyond 10%. The excellent mechanical conformability in these devices enables their applications in rigorous mechanical conditions such as flexing, twisting, stretching, and folding.The stretchable EL devices can be conformably wrapped onto arbitrary curvilinear surface and respond seamlessly to the external or internal forces, leading to unprecedented applications that cannot be addressed with conventional technologies. For example, they are in demand for wide applications in biomedical-related devices or sensors and soft interactive display systems, including activating devices for photosensitive drug, imaging apparatus for internal tissues, electronic skins, interactive input and output devices, robotics, and volumetric displays. With increasingly stringent demand on the mechanical requirements, the fabrication of stretchable EL device is encountering many challenges that are difficult to resolve. In this review, recent progresses in the stretchable EL devices are covered with a focus on the approaches that are adopted to tackle materials and process challenges in stretchable EL devices and delineate the strategies in stretchable electronics. We first introduce the emission mechanisms that have been successfully demonstrated on stretchable EL devices. Limitations and advantages of the different mechanisms for stretchable EL devices are also discussed. Representative reports are reviewed based on different structural and material strategies. Unprecedented applications that have been enabled by the stretchable EL devices are

  10. The Effect of Using a Modified Dentoalveolar Distractor on Canine Angulation following Rapid Canine Retraction: A Split-mouth Design Randomized Controlled Trial.

    Science.gov (United States)

    Al-Ainawi, Khaled I; Al-Mdalal, Yaser; Hajeer, Mohammad Y

    2016-01-01

    New studies have been published and aimed to retract canines by means of distraction osteogenesis to reduce treatment time. Although a great care has been given to achieve a bodily movement of the canines, a significant amount of tipping of the canines has been observed. This trial aimed to assess the effect of applying a modified distractor on canine angulation. The sample of the study consisted of 14 canines in seven patients (16-25 years). After the osteotomy procedure, two distractors were applied (one distractor on each side). After 5 days of a latency period, the two distractors were activated at a rate of 1 mm/day. There was a significant difference between the two distractors regarding the time required to retract the canines (p = 0.008) and the observed change in canine angulation following retraction (p = 0.028). The change in the overjet and the mandibular plane angle was statistically insignificant. Eight out of 14 distracted canines reacted positively to the pulp vitality tester after 3 months of completion of distraction. There was no clinical sign of discoloration or pulpal pain in any canine. Within the limits of this study, the modified distractor caused a bodily movement of the canine with a minimal tipping. Further research is required on a long-term basis on a larger group of patients to gain more insight on the observed changes.

  11. Stress Distribution Evaluation of the Periodontal Ligament in the Maxillary Canine for Retraction by Different Alveolar Corticotomy Techniques: A Three-dimensional Finite Element Analysis.

    Science.gov (United States)

    Pacheco, Ariel Adriano Reyes; Saga, Armando Yukio; de Lima, Key Fonseca; Paese, Victor Nissen; Tanaka, Orlando M

    2016-01-01

    By using the finite element method (FEM), this study aimed to evaluate the effect of different corticotomy formats on the distribution and magnitude of stress on the periodontal ligament (PDL) during retraction of the maxillary canine. A geometric model of the left hemi-jaw was created from computed tomography scan images of a dry human skull and loads were administered during distalization movement of the canine. Three trials were performed: (1) without corticotomy, (2) box-shaped corticotomy and perforations in the cortical bone of the canine (CVC) and (3) CVC and circular-shaped corticotomy in the cortical bone of the edentulous space of the first premolar. There was no difference in stress distribution among the different corticotomy formats. Different corticotomy formats used to accelerate orthodontic tooth movement did not affect stress distribution in the PDL during canine retraction. From a mechanical perspective, the present study showed that the stress distribution on the PDL during canine retraction was similar in all the corticotomy formats. When using the Andrews T2 bracket, the PDL presented the highest levels of stress in the middle third of the PDL, suggesting that the force was near the center of resistance. Also, as bone weakening by corticotomies did not influence stress distribution, the surgical procedure could be simplified to a less aggressive one, focusing more on inflammatory cellular stimulation than on bone resistance. A simpler surgical act could also be performed by most orthodontists in their practices, enhancing postoperative response and reducing patient costs.

  12. Serum profile of cytokines interferon gamma and interleukin-10 in ewes subjected to artificial insemination by cervical retraction.

    Science.gov (United States)

    Alvares, C T G; Cruz, J F; Romano, C C; Brandão, F Z

    2016-04-15

    This study evaluated the influence of artificial insemination (AI) by cervical retraction (CRI) on serum levels of interferon gamma (IFNγ) and interleukin-10 (IL-10) in ewes. Synchronized pluriparous Santa Inês ewes were subjected to natural mating (NM, n = 8) and AI, which was performed for a fixed time (55 ± 1 hour) by CRI (n = 8) or laparoscopy (n = 8). Ewes were classified as pregnant, with return to estrus (RE) or with embryonic loss (EL). Blood samples were collected on Day 0, Day 3, Day 5, Day 12, and Day 17 (Day 0 = AI/NM) for progesterone dosage and cytokines were quantified from Day 0 to Day 12. Progesterone levels were constant, except for a decrease in ewes with RE at Day 17 (P ewes with EL had lower serum levels of IFNγ and IL-10 than pregnant ewes and ewes with RE, regardless of the reproductive method used, with averages of 769.1, 714.9, and 555.7 pg/mL for IFNγ and 713.8, 699.3, and 578.7 pg/mL for IL-10 in pregnant ewes, ewes with RE and EL, respectively (P ewes does not alter the profile of serum cytokines IFNγ and IL-10 and does not induce an inflammatory reaction that can compromise pregnancy. Copyright © 2016 Elsevier Inc. All rights reserved.

  13. A system for the 3D reconstruction of retracted-septa PET data using the EM algorithm

    International Nuclear Information System (INIS)

    Johnson, C.A.; Yan, Y.; Carson, R.E.; Martino, R.L.; Daube-Witherspoon, M.E.

    1995-01-01

    The authors have implemented the EM reconstruction algorithm for volume acquisition from current generation retracted-septa PET scanners. Although the software was designed for a GE Advance scanner, it is easily adaptable to other 3D scanners. The reconstruction software was written for an Intel iPSC/860 parallel computer with 128 compute nodes. Running on 32 processors, the algorithm requires approximately 55 minutes per iteration to reconstruct a 128 x 128 x 35 image. No projection data compression schemes or other approximations were used in the implementation. Extensive use of EM system matrix (C ij ) symmetries (including the 8-fold in-plane symmetries, 2-fold axial symmetries, and axial parallel line redundancies) reduces the storage cost by a factor of 188. The parallel algorithm operates on distributed projection data which are decomposed by base-symmetry angles. Symmetry operators copy and index the C ij chord to the form required for the particular symmetry. The use of asynchronous reads, lookup tables, and optimized image indexing improves computational performance

  14. Expandable and retractable self-rolled structures based on metal/polymer thin film for flow sensing

    Science.gov (United States)

    Zhu, Jianzhong; White, Carl; Saadat, Mehdi; Bart-Smith, Hilary

    2015-11-01

    Most aquatic animals such as fish rely heavily on their ability of detect and respond to ambient flows in order to explore and inhabit various habitats or survive predator-prey encounters. Fish utilize neuromasts in their skin surface and lateral lines in their bodies to align themselves while swimming upstream for migration, avoid obstacles, reduce locomotion cost, and detect flow variations caused by potential predators. In this study, a thin film MEMS sensor analogous to a fish neuromast has been designed for flow sensing. Residual stress arises in many thin film materials during processing. Metal and polymer thin film materials with a significant difference in elastic modular were chosen to form a multiple-layer structure. Upon releasing, the structure rolls into a tube due to mechanical property mismatch. The self-rolled tube can expand or retract, depending on the existence of external force such as flow. An embedded strain sensor detects the deformation of the tube and hence senses the ambient flow. Numerical simulations were conducted to optimize the structural design. Experiments were performed in a flow tank to quantify the performance of the sensor. This research is supported by the Office of Naval Research under the MURI Grant N00014-14-1-0533.

  15. Why does Retraction Watch continue to offer support to Jeffrey Beall, and legitimize his post-mortem “predatory” lists?

    Directory of Open Access Journals (Sweden)

    Jaime A. Teixeira da Silva

    2017-07-01

    Full Text Available Retraction Watch is a science watchdog that may give the impression of being both an anti-bad science and an anti-science blog. This blog has tried to legitimize its ethical stance by naming its parent organization The Center for Science Integrity Inc. (CSI, and by appointing a former Chair of the Committee on Publication Ethics (COPE, Elizabeth Wager, to the CSI board of directors. Jeffrey Beall, another science watchdog, often appears in public alongside Adam Marcus and Ivan Oransky, the CSI secretary and president, respectively, and participates in events with Wager. Beall became academically redundant on January 15, 2017. This is because his blog, which hosted a faulty, controversial and misleading list (and thus potentially libelous of “predatory” open access journals and publishers, suddenly went blank. Beall offered no apology or explanation to the public, but was offered intellectual asylum and protection by the University of Colorado, Denver, where he works as a librarian. After a grace period of almost two months, members of the global academic community have now largely lost respect for Beall because of his silence, which may be equated with irresponsibility and/or cowardice. Despite this near extinct academic status, Retraction Watch continues to laud Beall, refer to his now-defunct site and lists as valid, as many as 25 times, and even rely on the Beall blog and lists to support several of their journalistic claims. In the world of science publishing, the legitimization of a “fact” using a defunct or false (i.e., non-factual source, is equivalent to publishing misconduct, and feeds into the “false facts” and “alternative truths” epidemic in journalism that Retraction Watch is now impregnating into science publishing. Why then is Retraction Watch allowed to operate under an ethically superior platform, while expecting scientists and academics to respect basic rules of citing valid references, but while practicing

  16. Principles, Techniques, and Applications of Tissue Microfluidics

    Science.gov (United States)

    Wade, Lawrence A.; Kartalov, Emil P.; Shibata, Darryl; Taylor, Clive

    2011-01-01

    The principle of tissue microfluidics and its resultant techniques has been applied to cell analysis. Building microfluidics to suit a particular tissue sample would allow the rapid, reliable, inexpensive, highly parallelized, selective extraction of chosen regions of tissue for purposes of further biochemical analysis. Furthermore, the applicability of the techniques ranges beyond the described pathology application. For example, they would also allow the posing and successful answering of new sets of questions in many areas of fundamental research. The proposed integration of microfluidic techniques and tissue slice samples is called "tissue microfluidics" because it molds the microfluidic architectures in accordance with each particular structure of each specific tissue sample. Thus, microfluidics can be built around the tissues, following the tissue structure, or alternatively, the microfluidics can be adapted to the specific geometry of particular tissues. By contrast, the traditional approach is that microfluidic devices are structured in accordance with engineering considerations, while the biological components in applied devices are forced to comply with these engineering presets.

  17. MRI-powered biomedical devices.

    Science.gov (United States)

    Hovet, Sierra; Ren, Hongliang; Xu, Sheng; Wood, Bradford; Tokuda, Junichi; Tse, Zion Tsz Ho

    2017-11-16

    Magnetic resonance imaging (MRI) is beneficial for imaging-guided procedures because it provides higher resolution images and better soft tissue contrast than computed tomography (CT), ultrasound, and X-ray. MRI can be used to streamline diagnostics and treatment because it does not require patients to be repositioned between scans of different areas of the body. It is even possible to use MRI to visualize, power, and control medical devices inside the human body to access remote locations and perform minimally invasive procedures. Therefore, MR conditional medical devices have the potential to improve a wide variety of medical procedures; this potential is explored in terms of practical considerations pertaining to clinical applications and the MRI environment. Recent advancements in this field are introduced with a review of clinically relevant research in the areas of interventional tools, endovascular microbots, and closed-loop controlled MRI robots. Challenges related to technology and clinical feasibility are discussed, including MRI based propulsion and control, navigation of medical devices through the human body, clinical adoptability, and regulatory issues. The development of MRI-powered medical devices is an emerging field, but the potential clinical impact of these devices is promising.

  18. Medical Device Safety

    Science.gov (United States)

    A medical device is any product used to diagnose, cure, or treat a condition, or to prevent disease. They ... may need one in a hospital. To use medical devices safely Know how your device works. Keep ...

  19. Soft-tissue tension total knee arthroplasty.

    Science.gov (United States)

    Asano, Hiroshi; Hoshino, Akiho; Wilton, Tim J

    2004-08-01

    It is far from clear how best to define the proper strength of soft-tissue tensioning in total knee arthroplasty (TKA). We attached a torque driver to the Monogram balancer/tensor device and measured soft-tissue tension in full extension and 90 degrees flexion during TKA. In our surgical procedure, when we felt proper soft-tissue tension was being applied, the mean distraction force was noted to be 126N in extension and 121N in flexion. There was no significant correlation between soft-tissue tension and the postoperative flexion angle finally achieved. To the best of our knowledge, this is the first study to assess the actual distraction forces in relation to soft-tissue tension in TKA. Further study may reveal the most appropriate forces to achieve proper soft-tissue tension in the wide variety of circumstances presenting at knee arthroplasty.

  20. Axon guidance in the developing ocular motor system and Duane retraction syndrome depends on Semaphorin signaling via alpha2-chimaerin

    Science.gov (United States)

    Ferrario, Juan E.; Baskaran, Pranetha; Clark, Christopher; Hendry, Aenea; Lerner, Oleg; Hintze, Mark; Allen, James; Chilton, John K.; Guthrie, Sarah

    2012-01-01

    Eye movements depend on correct patterns of connectivity between cranial motor axons and the extraocular muscles. Despite the clinical importance of the ocular motor system, little is known of the molecular mechanisms underlying its development. We have recently shown that mutations in the Chimaerin-1 gene encoding the signaling protein α2-chimaerin (α2-chn) perturb axon guidance in the ocular motor system and lead to the human eye movement disorder, Duane retraction syndrome (DRS). The axon guidance cues that lie upstream of α2-chn are unknown; here we identify candidates to be the Semaphorins (Sema) 3A and 3C, acting via the PlexinA receptors. Sema3A/C are expressed in and around the developing extraocular muscles and cause growth cone collapse of oculomotor neurons in vitro. Furthermore, RNAi knockdown of α2-chn or PlexinAs in oculomotor neurons abrogates Sema3A/C-dependent growth cone collapse. In vivo knockdown of endogenous PlexinAs or α2-chn function results in stereotypical oculomotor axon guidance defects, which are reminiscent of DRS, whereas expression of α2-chn gain-of-function constructs can rescue PlexinA loss of function. These data suggest that α2-chn mediates Sema3–PlexinA repellent signaling. We further show that α2-chn is required for oculomotor neurons to respond to CXCL12 and hepatocyte growth factor (HGF), which are growth promoting and chemoattractant during oculomotor axon guidance. α2-chn is therefore a potential integrator of different types of guidance information to orchestrate ocular motor pathfinding. DRS phenotypes can result from incorrect regulation of this signaling pathway. PMID:22912401

  1. Evaluation of periosteal fixation of lateral rectus and partial VRT for cases of exotropic Duane retraction syndrome

    Directory of Open Access Journals (Sweden)

    Pradeep Sharma

    2014-01-01

    Full Text Available Purpose: The purpose of this study is to evaluate the lateral rectus periosteal fixation and partial vertical rectus transpositioning (VRT as treatment modalities to correct exotropic Duane retraction syndrome (Exo-DRS. Materials and Methods: Prospective interventional case study of cases of Exo-DRS with limitation of adduction. A total of 13 patients were subdivided into two groups. Six patients underwent only lateral rectus periosteal fixation (group A and seven patients also underwent partial VRT (group B. Assessment involved prism bar cover test, abduction and adduction range, extent of binocular single visual field and exophthalmometry. These tests were repeated at 1 week, 1 month and 3 months post-operatively and data analyzed. Results: The pre-operative mean values and ranges were 26.2 Δ (22-35 exotropia for group A and −21.3 Δ (14-30 exotropia for group B. The post-operative mean and range was +0.6 Δ esotropia (+20 to −8 for group A and 8 Δ (−2 to −20 exotropia for group B. Mean grade of limitation of abduction changed from −3.8 to −3.6 versus −3.6 to −2.8 and mean grade of limitation of adduction changed from −1.9 to −0.7 versus −1.5 to −0.5 in the groups A and B respectively. Mean binocular single visual field changed from 14.7° to 23.3° in group A and 11.8° to 26.4° in the group B respectively. Conclusion: Lateral rectus periosteal fixation is an effective surgery to correct the exodeviation, anomalous head posture and improving adduction in Exo-DRS and partial VRT in addition is effective in improving abduction and binocular single visual fields.

  2. Implantable electronic medical devices

    CERN Document Server

    Fitzpatrick, Dennis

    2014-01-01

    Implantable Electronic Medical Devices provides a thorough review of the application of implantable devices, illustrating the techniques currently being used together with overviews of the latest commercially available medical devices. This book provides an overview of the design of medical devices and is a reference on existing medical devices. The book groups devices with similar functionality into distinct chapters, looking at the latest design ideas and techniques in each area, including retinal implants, glucose biosensors, cochlear implants, pacemakers, electrical stimulation t

  3. Estudo laboratorial do tempo de fechamento das alças e do grau de inclinação do canino, durante o procedimento de retração, empregando mecânica de arco segmentado Laboratorial study of loops closure time and degree of cuspid´s tipping, during the retraction phase, using segmented arch mechanics

    Directory of Open Access Journals (Sweden)

    Gilberto Kauling Bisol

    2010-02-01

    variables was submitted to a test developed on a typodont simulator used specifically for this purpose. RESULTS: As the closure timing concerns, it was verified that a slower closure and therefore, a smaller releasing force system was achieved by the "T" loop design and still, by employing the beta-titanium alloy on its construction. As to the tipping effects generated by the retraction device, the "tear drop" loop caused greater tipping effects than the other loops evaluated. The "T" loop, on the other hand, showed itself statistically related to the lowest tipping numerical values. However, when the 3M Unitek stainless steel wire was used to produce the device, all of the types of loops evaluated were considered statistically similar. CONCLUSION: Regardless of the loop design, the ones built out of beta-titanium alloy kept them statistically related to the lowest tipping numerical values observed for the retracted dental element.

  4. Modelling degradation of bioresorbable polymeric medical devices

    CERN Document Server

    Pan, J

    2015-01-01

    The use of bioresorbable polymers in stents, fixation devices and tissue engineering is revolutionising medicine. Both industry and academic researchers are interested in using computer modelling to replace some experiments which are costly and time consuming. This book provides readers with a comprehensive review of modelling polymers and polymeric medical devices as an alternative to practical experiments. Chapters in part one provide readers with an overview of the fundamentals of biodegradation. Part two looks at a wide range of degradation theories for bioresorbable polymers and devices.

  5. Small cryotherapy devices for the treatment of skin warts.

    Science.gov (United States)

    Zouboulis, Viktor A; Zouboulis, Christos C

    2017-12-01

    Effectiveness of cryotherapy on skin wart models. Two small cryotherapy devices, Wartner and Wortie, were administered for 10″-60″ on tomatoes and potatoes used as skin wart models. Frozen surface and depth were evaluated by standardized photography and computer analysis. Tissue temperature at depths of 0.1-10 mm was assessed by an electronic thermometer during treatment. Cryotherapy induced a transient freezing of the tomato surface. The devices produced similar tomato tissue temperature reduction at all depths examined. At 5 mm, Wortie induced lower tissue temperatures than Wartner. Both devices induced potato tissue destruction to a depth of 0.5-1.2 mm at 40″ and 50″. Wartner induced a maximum destruction at 40″, Wortie led to a partially linear destruction depth with freezing time. The devices produced similar reduction of potato tissue temperature at all depths tested. Wartner induced more rapidly lower temperatures (1.5 mm, 10″, p = .001). Wortie induced lower tissue temperatures with time (0.1 mm, 50″, p = .025; 60″, p = .039; 5 mm, 60″, p = .05). None of the devices reached the lethal temperature of -22 °C. Both cryotherapy devices produced sufficient tissue damage, at least in the potatoes, to a depth of 0.5-1.2 mm when applied for 40″ (commercially proposed time).

  6. Hip supporting device

    DEFF Research Database (Denmark)

    2011-01-01

    The present invention relates to a device for limiting movements in one or more anatomical joints, such as a device for limiting movement in the human hip joint after hip replacement surgery. This is provided by a device for limiting movement in the human hip joint, said device comprising: at least...

  7. FLUIDICS DEVICE FOR ASSAY

    DEFF Research Database (Denmark)

    2007-01-01

    The present invention relates to a device for use in performing assays on standard laboratory solid supports whereon chemical entities are attached. The invention furthermore relates to the use of such a device and a kit comprising such a device. The device according to the present invention is a...

  8. Mixed Connective Tissue Disease

    Science.gov (United States)

    Mixed connective tissue disease Overview Mixed connective tissue disease has signs and symptoms of a combination of disorders — primarily lupus, scleroderma and polymyositis. For this reason, mixed connective tissue disease ...

  9. Undifferentiated Connective Tissue Disease

    Science.gov (United States)

    ... Home Conditions Undifferentiated Connective Tissue Disease (UCTD) Undifferentiated Connective Tissue Disease (UCTD) Make an Appointment Find a Doctor ... by Barbara Goldstein, MD (February 01, 2016) Undifferentiated connective tissue disease (UCTD) is a systemic autoimmune disease. This ...

  10. Soft Tissue Sarcoma

    Science.gov (United States)

    ... muscles, tendons, fat, and blood vessels. Soft tissue sarcoma is a cancer of these soft tissues. There ... have certain genetic diseases. Doctors diagnose soft tissue sarcomas with a biopsy. Treatments include surgery to remove ...

  11. Power source device for thermonuclear device

    International Nuclear Information System (INIS)

    Ozaki, Akira.

    1992-01-01

    The present invention provides a small sized and economical power source device for a thermonuclear device. That is, the device comprises a conversion device having a rated power determined by a power required during a plasma current excitation period and a conversion device having a rated power determined by a power required during a plasma current maintaining period, connected in series to each other. Then, for the former conversion device, power is supplied from an electric power generator and, for the latter, power is supplied from a power system. With such a constitution, during the plasma electric current maintaining period for substantially continuous operation, it is possible to conduct bypassing paired operation for the former conversion device while the electric power generator is put under no load. Further, since a short period rated power may be suffice for the former conversion device and the electric power generator having the great rated power required for the plasma electric current excitation period, they can be reduced in the size and made economical. On the other hand, since the power required for the plasma current maintaining period is relatively small, the capacity of the continuous rated conversion device may be small, and the power can be received from the power system. (I.S.)

  12. Spatial-orientation priming impedes rather than facilitates the spontaneous control of hand-retraction speeds in patients with Parkinson's disease.

    Directory of Open Access Journals (Sweden)

    Polina Yanovich

    Full Text Available BACKGROUND: Often in Parkinson's disease (PD motor-related problems overshadow latent non-motor deficits as it is difficult to dissociate one from the other with commonly used observational inventories. Here we ask if the variability patterns of hand speed and acceleration would be revealing of deficits in spatial-orientation related decisions as patients performed a familiar reach-to-grasp task. To this end we use spatial-orientation priming which normally facilitates motor-program selection and asked whether in PD spatial-orientation priming helps or hinders performance. METHODS: To dissociate spatial-orientation- and motor-related deficits participants performed two versions of the task. The biomechanical version (DEFAULT required the same postural- and hand-paths as the orientation-priming version (primed-UP. Any differences in the patients here could not be due to motor issues as the tasks were biomechanically identical. The other priming version (primed-DOWN however required additional spatial and postural processing. We assessed in all three cases both the forward segment deliberately aimed towards the spatial-target and the retracting segment, spontaneously bringing the hand to rest without an instructed goal. RESULTS AND CONCLUSIONS: We found that forward and retracting segments belonged in two different statistical classes according to the fluctuations of speed and acceleration maxima. Further inspection revealed conservation of the forward (voluntary control of speed but in PD a discontinuity of this control emerged during the uninstructed retractions which was absent in NC. Two PD groups self-emerged: one group in which priming always affected the retractions and the other in which only the more challenging primed-DOWN condition was affected. These PD-groups self-formed according to the speed variability patterns, which systematically changed along a gradient that depended on the priming, thus dissociating motor from spatial

  13. Retraction notice to: influence of post fit and post length on fracture resistance: an in vitro study. J Contemp Dent Pract 2013;14(3):496-500.

    Science.gov (United States)

    2013-09-01

    It has been notified to the Editorial Board, The Journal of Contemporary Dental Practice (JCDP), that considerable script of the aforementioned article has been plagiarized from the article: Büttel L, Krastl G, Lorch H, Naumann M, Zitzmann NU, Weiger R. Influence of Post Fit and Post Length on Fracture Resistance. Int Endod J 2009;42(1):47-53. The same was confirmed after thorough evaluation and interpretation. In accordance to observe serious view in case of plagiarism, the Editorial Board, JCDP decided to take appropriate action against the act. Thus, it is herewith decided by the Editorial Board, JCDP to retract the title as addressed from the assigned issue.

  14. Retraction notice to "Fungal diversity is negatively affected by habitat fragmentation: a meta-analysis" [Current Opinion in Microbiology 37 (2017) 61-66].

    Science.gov (United States)

    Grilli, G; Longo, S; Huais, P Y; Pereyra, M; Verga, E; Urcelay, C; Galetto, L

    2017-06-01

    This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/about/our-business/policies/article-withdrawal). This article that has already been published in Current Opinion in Microbiology, 37, June 2017 61-66>, http://dx.doi.org/10.1016/j.mib.2017.03.015 has been withdrawn at the request of the editor and publisher. The publisher regrets that an error occurred which led to the premature publication of this paper. This error bears no reflection on the article or its authors. The publisher apologizes to the authors and the readers for this unfortunate error. Copyright © 2017.

  15. Body Implanted Medical Device Communications

    Science.gov (United States)

    Yazdandoost, Kamya Yekeh; Kohno, Ryuji

    The medical care day by day and more and more is associated with and reliant upon concepts and advances of electronics and electromagnetics. Numerous medical devices are implanted in the body for medical use. Tissue implanted devices are of great interest for wireless medical applications due to the promising of different clinical usage to promote a patient independence. It can be used in hospitals, health care facilities and home to transmit patient measurement data, such as pulse and respiration rates to a nearby receiver, permitting greater patient mobility and increased comfort. As this service permits remote monitoring of several patients simultaneously it could also potentially decrease health care costs. Advancement in radio frequency communications and miniaturization of bioelectronics are supporting medical implant applications. A central component of wireless implanted device is an antenna and there are several issues to consider when designing an in-body antenna, including power consumption, size, frequency, biocompatibility and the unique RF transmission challenges posed by the human body. The radiation characteristics of such devices are important in terms of both safety and performance. The implanted antenna and human body as a medium for wireless communication are discussed over Medical Implant Communications Service (MICS) band in the frequency range of 402-405MHz.

  16. Tissue engineered devices for ligament repair, replacement and ...

    African Journals Online (AJOL)

    PRECIOUS

    2009-12-29

    Dec 29, 2009 ... available, and the success rates for long term clinical outcome are 85 - 90% ... Schematic of a stress-strain curve for ligament or tendon displaying the toe, ...... monkey: I. A model for chronic xenograft rejection. Transplantation,.

  17. RETRACTION: Publishers' Note

    Science.gov (United States)

    post="(Executive Editor">Graeme Watt,

    2010-06-01

    Withdrawal of the paper "Was the fine-structure constant variable over cosmological time?" by L. D. Thong, N. M. Giao, N. T. Hung and T. V. Hung (EPL, 87 (2009) 69002) This paper has been formally withdrawn on ethical grounds because the article contains extensive and repeated instances of plagiarism. EPL treats all identified evidence of plagiarism in the published articles most seriously. Such unethical behaviour will not be tolerated under any circumstance. It is unfortunate that this misconduct was not detected before going to press. My thanks to Editor colleagues from other journals for bringing this fact to my attention.

  18. Retraction | Simon | African Zoology

    African Journals Online (AJOL)

    Panthera leo) ina. West African national park”. African Zoology is publishing an Editorial Expression of Concern regarding the following article: “New records of a threatened lion population (Panthera leo) in a West African national park” by ...

  19. Effects of compression injury on brain mitochondrial and tissue viability evaluated by a multiparametric monitoring system

    Science.gov (United States)

    Barbiro-Michaely, Efrat; Bachbut, Galit; Mayevsky, Avraham

    2008-02-01

    Neurosurgical procedures involve brain compression created by retractors. Although it is clear that retractors are causing damage to the brain tissue, the pathophysiology of the retraction was not investigated in details. In the present study we used the multiparametric monitoring approach for real time evaluation of mitochondrial function, hemodynamic, ionic and electrical activities monitored contralaterally to the retractor placement on the brain. The aims of the study were to test the effects of retractor size and severity of the compression on the degree of damage to the cerebral tissue. A special probe was lowered towards the cerebral cortex, (2mm and 4mm in depth) using a micromanipulator. Compression lasted for 30 minutes, than the retractor was elevated back to its initial position and monitoring continued for two hours. Additionally, two sizes of retractors were used 6mm and 3mm in diameter, the 3mm retractor included an intracranial pressure (ICP) probe. The results show that the combination of a large retractor with the depth of 4mm yielded high mortality rate (62%) of the rats while the use of a smaller retractor decreased significantly the percentage of mortality. Also, compression to the depth of 4mm increased tissue injury as compared to 2mm depth. In conclusion, the present study raises the importance and significance of multiparametric monitoring, and not only ICP and cerebral blood flow of the areas nearby the retractor position and not only the retraction site, as well as the effect of the retractor size on the damage induced to the cerebral tissue.

  20. RETRACTED: A fluorescent molecularly-imprinted polymer gate with temperature and pH as inputs for detection of alpha-fetoprotein.

    Science.gov (United States)

    Karfa, Paramita; Roy, Ekta; Patra, Santanu; Kumar, Deepak; Madhuri, Rashmi; Sharma, Prashant K

    2016-04-15

    This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/about/our-business/policies/article-withdrawal). This article has been retracted at the request of the Editor following concerns raised by a reader. The article reuses an electron micrograph from a previous publication while claiming that these are different particles. Fig. 1C/D were reused from Fig. 2B published in Biosensors and Bioelectronics, Volume 73, 15 November 2015, Pages 234–244, https://doi.org/10.1016/j.bios.2015.06.005. This problem with the data presented casts doubt on all the data, and accordingly also the conclusions based on that data, in this publication. As such this article represents a severe abuse of the scientific publishing system. The scientific community takes a very strong view on this matter and apologies are offered to readers of the journal that this was not detected during the submission process. Copyright © 2015 Elsevier B.V. All rights reserved.

  1. RETRACTED: Investigation of plasmonic studies on morphology of deposited silver thin films having different thicknesses by soft computing methodologies-A comparative study

    Science.gov (United States)

    Zakaria, Rozalina; Noh, Siti Munirah Che; Petković, Dalibor; Shamshirband, Shahaboddin; Penny, Richard

    2014-09-01

    This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Editor. After a thorough investigation, the Editor has concluded that the acceptance of this article was based upon the positive advice of at least one faked reviewer report. The report was submitted from a fictitious email account which was provided to the journal as a suggested reviewer by the corresponding author during the submission of the paper. This manipulation of the peer-review process represents a clear violation of the fundamentals of peer review, our publishing policies, and publishing ethics standards. Apologies are offered to the readers of the journal that this deception was not detected during the submission process. Section 3 of the article plagiarizes part of the text that appeared in the article published by R. Maity et al in Hydrological Processes 24 (2010) 917-923, http://dx.doi.org/10.1002/hyp.7535. The article also duplicates parts of the articles previously published by the authors in the Journal of the Optical Society of America A 31 (2014) 1023-1030, http://dx.doi.org/10.1364/JOSAA.31.001023, Infrared Physics & Technology 65 (2014) 94-102, http://dx.doi.org/10.1016/j.infrared.2014.04.005 and Plasmonics 9 (2014) 1189-1196, http://dx.doi.org/10.1007/s11468-014-9730-3.

  2. RETRACTED: Granular and intergranular conduction in La1.32Sr1.68Mn2O7 layered manganite system

    International Nuclear Information System (INIS)

    Narjis, A.; El kaaouachi, A.; Dlimi, S.; Biskupski, G.; Daoudi, E.; Errai, M.; Sybous, A.; Limouny, L.

    2013-01-01

    This article has been retracted: please see Elsevier Policy on Article Withdrawal ( (http://www.elsevier.com/locate/withdrawalpolicy)). This article has been retracted at the request of the Editors. The authors have plagiarized part of a paper that had already appeared in J. Appl. Phys. 106, 093709 (2009); (10.1063/1.3256182) (6 pages): Title: Effects of pressure on charge transport and magnetic properties of La1.32Sr1.68Mn2O7 layered manganite by M. Kumaresavanji, M. S. Reis, Y. T. Xing, and M. B. Fontes. One of the conditions of submission of a paper for publication is that authors declare explicitly that their work is original and has not appeared in a publication elsewhere. Re-use of any data should be appropriately cited. As such this article represents a severe abuse of the scientific publishing system. The scientific community takes a very strong view on this matter and apologies are offered to readers of the journal that this was not detected during the submission process

  3. The Effects of Orthodontic Forces during Canine Retraction Using Self-ligating Brackets on Gingival Crevicular Fluid Enzyme Activity, Canine Movement and Root Resorption

    International Nuclear Information System (INIS)

    Rohaya Megat Abdul Wahab; Albira Sintian; Zaidah Zainal Arifin; Zaidah Zainal Ariffin; Shahrul Hisham Zainal Ariffin

    2015-01-01

    Alkaline phosphatase (ALP), tartrate-resistant acid phosphatase (TRAP) and aspartate aminotransferase (AST) activities were studied as bio markers of canine movement. Root resorption was also evaluated in canines subjected to the orthodontic forces. Nineteen subjects randomly received 100 and 150 g force using self-ligating brackets (SLB) either on the right or left site of maxillary arch. Gingival crevicular fluid samples were collected at distal sites of canines for five consecutive weeks. The activities of ALP, TRAP and AST were assayed and measured spectrophotometrically. Canine movement was measured for five consecutive weeks while root resorption was monitored at baseline, week 0 and week 5 using periapical radiographs. In 100 g group, TRAP activity significantly increased in week 3-5 when compared to TRAP baseline activity. However, ALP and AST activities slightly increased. In 150 g group, ALP and TRAP activities slightly increased when compared with their baseline activities. However, AST significantly increased in week 5. Canine movement and root resorption were not significantly different (p<0.05) in both groups. A force of 100 and 150 g slightly increased the bone modeling process and resulted in similar canine movement and root resorption. Therefore, 100 g force could be an optimum force for canine retraction and is preferable (compared with 150 g force) in canine retraction using SLB. (author)

  4. Detection of oral streptococci in dental unit water lines after therapy with air turbine handpiece: biological fluid retraction more frequent than expected.

    Science.gov (United States)

    Petti, Stefano; Moroni, Catia; Messano, Giuseppe Alessio; Polimeni, Antonella

    2013-03-01

    Oral streptococci detected in water from dental unit water lines (DUWLs) are a surrogate marker of patients' biological fluid retraction during therapy. We investigated oral streptococci detection rate in DUWLs in a representative sample of private offices in real-life conditions. Samples of nondisinfected water (100 ml) were collected from the DUWL designated for the air turbine handpiece in 81 dental units, immediately after dental treatment of patients with extensive air turbine handpiece use. Water was filtered and plated on a selective medium for oral streptococci and, morphologically, typical colonies of oral streptococci were counted. The lowest detection limit was 0.01 CFU/ml. The oral streptococci detection rate was 72% (95% CI: 62-81%), with a mean level of 0.7 CFU/ml. Oral streptococci detection was not affected by handpiece age or dental treatment type, but was associated with dental unit age. Biological fluid retraction into DUWLs during patient treatment and, possibly, the risk for patient-to-patient blood- or air-borne pathogen transmission are more frequent than expected.

  5. Tissue bionics: examples in biomimetic tissue engineering

    Energy Technology Data Exchange (ETDEWEB)

    Green, David W [Bone and Joint Research Group, Developmental Origins of Health and Disease, General Hospital, University of Southampton, SO16 6YD (United Kingdom)], E-mail: Hindoostuart@googlemail.com

    2008-09-01

    Many important lessons can be learnt from the study of biological form and the functional design of organisms as design criteria for the development of tissue engineering products. This merging of biomimetics and regenerative medicine is termed 'tissue bionics'. Clinically useful analogues can be generated by appropriating, modifying and mimicking structures from a diversity of natural biomatrices ranging from marine plankton shells to sea urchin spines. Methods in biomimetic materials chemistry can also be used to fabricate tissue engineering scaffolds with added functional utility that promise human tissues fit for the clinic.

  6. Tissue bionics: examples in biomimetic tissue engineering

    International Nuclear Information System (INIS)

    Green, David W

    2008-01-01

    Many important lessons can be learnt from the study of biological form and the functional design of organisms as design criteria for the development of tissue engineering products. This merging of biomimetics and regenerative medicine is termed 'tissue bionics'. Clinically useful analogues can be generated by appropriating, modifying and mimicking structures from a diversity of natural biomatrices ranging from marine plankton shells to sea urchin spines. Methods in biomimetic materials chemistry can also be used to fabricate tissue engineering scaffolds with added functional utility that promise human tissues fit for the clinic

  7. Retraction: Nucleophagy in Human Disease: Beyond the Physiological Role. [Tohoku J. Exp. Med., 2018, 244 (1), 75-81. doi: 10.1620/tjem.244.75. Review.].

    Science.gov (United States)

    2018-02-01

    Retracted Review article: Nucleophagy in Human Disease: Beyond the Physiological Role. [Tohoku J. Exp. Med., 2018, 244 (1), 75-81. doi: 10.1620/tjem.244.75.] The above Review article was published online on January 27, 2018. Soon after its publication (on February 1, 2018), Dr. Nian Fu and Prof. Linxi Chen informed the Editor-in-Chief, The Tohoku Journal of Experimental Medicine (TJEM), about serious violation of publication ethics. Indeed, Dr. Nian Fu and Prof. Linxi Chen were astonished to find their names as coauthors of this Review article, because they were not involved in the submission process of this Review article and they do not know any of other coauthors. In addition, the Review article is similar to their unpublished manuscript. After a thorough investigation in accordance with the recommendations of the Committee on Publication Ethics (COPE), the Editor-in-Chief of TJEM decided to retract this Review article. The reasons for Retraction are summarized below: forged authors and an unexpected case of plagiarism. Forged authors: Dr. Nian Fu and Prof. Linxi Chen were added as co-authors of the Review article without their knowledge. In fact, the signature provided by Prof. Linxi Chen is apparently different from the signature of a coauthor, named Linxi Chen, on the AUTHORS’ RESPONSIBILITY FORM, provided by the corresponding author of the Review article. More critically, the signature provided by Dr. Nian Fu is completely different from the signature of Nian Fu, because the Chinese characters are different between the two signatures. In addition, the replies from three authors (Ming Zhou, Hongwen Ji and Yong Xia) clearly indicate that they misunderstand the identity of Dr. Nina Fu. We also attempted to contact two authors, named Nian Fu and Linxi Chen, via e-mail. As expected, the forged authors did not respond to our inquiries, despite that their e-mail addresses appear to be active. An unexpected case of plagiarism: This Review article is similar to the

  8. Implantable Medical Devices

    Science.gov (United States)

    ... Artery Disease Venous Thromboembolism Aortic Aneurysm More Implantable Medical Devices Updated:Sep 16,2016 For Rhythm Control ... a Heart Attack Introduction Medications Surgical Procedures Implantable Medical Devices • Life After a Heart Attack • Heart Attack ...

  9. Devices for hearing loss

    Science.gov (United States)

    ... the sounds you want to hear. Assistive listening devices bring certain sounds directly to your ears. This can ... a small room or on a stage. Other devices can bring the sound from your TV, radio, or music ...

  10. Novel Magnetic Devices

    National Research Council Canada - National Science Library

    Schuller, Ivan

    2007-01-01

    ...: ballistic magnetoresistance, magnetic field proximity effect and spin drag. These three phenomena would then be exploited for the design of novel device architectures and to investigate the physical principles behind these devices...

  11. Retraction notice to “Methylation of apoptosis related genes in the pathogenesis and prognosis of prostate cancer” [Cancer Lett. 242 (2) (2006) 222–230]. Makoto Suzuki, Hisayuki Shigematsu, Narayan Shivapurkar, Jyotsna Reddy, Kuniharu Miyajima, Takao Takahashi, Adi F. Gazdar, Eugene P. Frenke.

    Science.gov (United States)

    2015-04-28

    Available online . This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the first author, who accepts responsibility. Following an internal review at the UT Southwestern Medical Center in Dallas, evidence has been found of improper manipulation and duplication of Figure 1 in this article.

  12. Smart devices are different

    DEFF Research Database (Denmark)

    Stisen, Allan; Blunck, Henrik; Bhattacharya, Sourav

    2015-01-01

    research results. This is due to variations in training and test device hardware and their operating system characteristics among others. In this paper, we systematically investigate sensor-, device- and workload-specific heterogeneities using 36 smartphones and smartwatches, consisting of 13 different...... device models from four manufacturers. Furthermore, we conduct experiments with nine users and investigate popular feature representation and classification techniques in HAR research. Our results indicate that on-device sensor and sensor handling heterogeneities impair HAR performances significantly...

  13. Heterostructures and quantum devices

    CERN Document Server

    Einspruch, Norman G

    1994-01-01

    Heterostructure and quantum-mechanical devices promise significant improvement in the performance of electronic and optoelectronic integrated circuits (ICs). Though these devices are the subject of a vigorous research effort, the current literature is often either highly technical or narrowly focused. This book presents heterostructure and quantum devices to the nonspecialist, especially electrical engineers working with high-performance semiconductor devices. It focuses on a broad base of technical applications using semiconductor physics theory to develop the next generation of electrical en

  14. Rooting an Android Device

    Science.gov (United States)

    2015-09-01

    1. Overview The purpose of this document is to demonstrate how to gain administrative privileges on an Android device. The term “rooting” is...is applicable for the Samsung Galaxy S3 as well as many other Android devices, but there are several steps involved in rooting an Android device (as...root access has been granted. 4. Conclusion This document serves as a tutorial on how to grant user administrative privilege to an Android device by

  15. Prevention of gingival trauma : Oral hygiene devices and oral piercings

    NARCIS (Netherlands)

    Hoenderdos, N.L.

    2017-01-01

    Maintaining healthy teeth and soft oral tissues for life is important. Oral hygiene devices and oral piercings can damage the soft oral tissues. This thesis investigates the safety of manual toothbrushes, interdental brushes and rubber bristles interdental cleaners by analysing the gingival abrasion

  16. 21 CFR 864.3875 - Automated tissue processor.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Automated tissue processor. 864.3875 Section 864.3875 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES HEMATOLOGY AND PATHOLOGY DEVICES Pathology Instrumentation and Accessories § 864.3875...

  17. 21 CFR 864.3010 - Tissue processing equipment.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Tissue processing equipment. 864.3010 Section 864.3010 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES HEMATOLOGY AND PATHOLOGY DEVICES Pathology Instrumentation and Accessories § 864.3010...

  18. Photovoltaic device and method

    Science.gov (United States)

    Cleereman, Robert J; Lesniak, Michael J; Keenihan, James R; Langmaid, Joe A; Gaston, Ryan; Eurich, Gerald K; Boven, Michelle L

    2015-01-27

    The present invention is premised upon an improved photovoltaic device ("PVD") and method of use, more particularly to an improved photovoltaic device with an integral locator and electrical terminal mechanism for transferring current to or from the improved photovoltaic device and the use as a system.

  19. Radioactive waste processing device

    International Nuclear Information System (INIS)

    Inaguma, Masahiko; Takahara, Nobuaki; Hara, Satomi.

    1996-01-01

    In a processing device for filtering laundry liquid wastes and shower drains incorporated with radioactive materials, a fiber filtration device is disposed and an activated carbon filtration device is also disposed subsequent to the fiber filtration device. In addition, a centrifugal dewatering device is disposed for dewatering spent granular activated carbon in the activated carbon filtration device, and a minute filtering device is disposed for filtering the separated dewatering liquid. Filtrates filtered by the minute filtration device are recovered in a collecting tank. Namely, at first, suspended solid materials in laundry liquid wastes and shower drains are captured, and then, ingredients concerning COD are adsorbed in the activated carbon filtration device. The radioactive liquid wastes of spent granular activated carbon in the activated carbon filtration device are reduced by dewatering them by the centrifugal dewatering device, and then the granular activated carbon is subjected to an additional processing. Further, it is separated by filtration using the minute filtration device and removed as cakes. Since the filtrates are recovered to the collecting tank and filtered again, the water quality of the drains is not degraded. (N.H.)

  20. Inspection device in liquid

    International Nuclear Information System (INIS)

    Nagaoka, Etsuo.

    1996-01-01

    The present invention provides an inspection device in PWR reactor core in which inspection operations are made efficient by stabilizing a posture of the device in front-to-back, vertical and left-to-right directions by a simple structure. When the device conducts inspection while running in liquid, the front and the back directions of the device main body are inspected using a visual device while changing the posture by operating a front-to-back direction propulsion device and a right-to-left direction propulsion device, and a vertical direction propulsion device against to rolling, pitching and yawing of the device main body. In this case, a spherical magnet moves freely in the gravitational direction in a vibration-damping fluid in a non-magnetic spherical shell following the change of the posture of the device main body, in which the vibrations due to the movement of the spherical magnet is settled by the vibration-damping fluid thereby stabilizing the posture of the device main body. At a typical inspection posture, the settling effect is enhanced by the attraction force between the spherical magnets in the spherical shell and each of magnetic force-attracted magnetic members disposed to the outer circumference of the shell, and the posture of the device main body can be confirmed in front-to-back, right-to-left and vertical directions by each of the posture confirming magnetic sensors. (N.H.)