WorldWideScience

Sample records for tissue compositions compounds

  1. A Novel High Mechanical Property PLGA Composite Matrix Loaded with Nanodiamond-Phospholipid Compound for Bone Tissue Engineering.

    Science.gov (United States)

    Zhang, Fan; Song, Qingxin; Huang, Xuan; Li, Fengning; Wang, Kun; Tang, Yixing; Hou, Canglong; Shen, Hongxing

    2016-01-20

    A potential bone tissue engineering material was produced from a biodegradable polymer, poly(lactic-co-glycolic acid) (PLGA), loaded with nanodiamond phospholipid compound (NDPC) via physical mixing. On the basis of hydrophobic effects and physical absorption, we modified the original hydrophilic surface of the nanodiamond (NDs) with phospholipids to be amphipathic, forming a typical core-shell structure. The ND-phospholipid weight ratio was optimized to generate sample NDPC50 (i.e., ND-phospholipid weight ratio of 100:50), and NDPC50 was able to be dispersed in a PLGA matrix at up to 20 wt %. Compared to a pure PLGA matrix, the introduction of 10 wt % of NDPC (i.e., sample NDPC50-PF10) resulted in a significant improvement in the material's mechanical and surface properties, including a decrease in the water contact angle from 80 to 55°, an approximately 100% increase in the Young's modulus, and an approximate 550% increase in hardness, thus closely resembling that of human cortical bone. As a novel matrix supporting human osteoblast (hFOB1.19) growth, NDPC50-PFs with different amounts of NDPC50 demonstrated no negative effects on cell proliferation and osteogenic differentiation. Furthermore, we focused on the behaviors of NDPC-PFs implanted into mice for 8 weeks and found that NDPC-PFs induced acceptable immune response and can reduce the rapid biodegradation of PLGA matrix. Our results represent the first in vivo research on ND (or NDPC) as nanofillers in a polymer matrix for bone tissue engineering. The high mechanical properties, good in vitro and in vivo biocompatibility, and increased mineralization capability suggest that biodegradable PLGA composite matrices loaded with NDPC may potentially be useful for a variety of biomedical applications, especially bone tissue engineering.

  2. Compound composite odontoma.

    Science.gov (United States)

    Girish, G; Bavle, Radhika M; Singh, Manish Kumar; Prasad, Sahana N

    2016-01-01

    The term odontoma has been used as a descriptor for any tumor of odontogenic origin. It is a growth in which both epithelial and mesenchymal cells exhibits complete differentiation. Odontomas are considered as hamartomas rather than true neoplasm. They are usually discovered on routine radiographic examination. Odontomas, according to the World Health Organization, are classified into complex odontoma and compound odontomas. The present paper reports a case of compound composite odontomas.

  3. Microsurgical Composite Tissue Transplantation

    Science.gov (United States)

    Serafin, Donald; Georgiade, Nicholas G.

    1978-01-01

    Since 1974, 69 patients with extensive defects have undergone reconstruction by microsurgical composite tissue transplantation. Using this method, donor composite tissue is isolated on its blood supply, removed to a distant recipient site, and the continuity of blood flow re-established by microvascular anastomoses. In this series, 56 patients (81%) were completely successful. There have been eight (12%) failures, primarily in the extremities. There have been five (7%) partial successes, (i.e., a microvascular flap in which a portion was lost requiring a secondary procedure such as a split thickness graft). In those patients with a severely injured lower extremity, the failure rate was the greatest. Most of these were arterial (six of seven). These failures occurred early in the series and were thought to be related to a severely damaged recipient vasculature. This problem has been circumvented by an autogenous interpositional vein graft, permitting more mobility of flap placement. In the upper extremity, all but one case were successful. Early motion was permitted, preventing joint capsular contractures and loss of function. Twenty-three cases in the head and neck region were successful (one partial success). This included two composite rib grafts to the mandible. Prolonged delays in reconstruction following extirpation of a malignancy were avoided. A rapid return to society following complete reconstruction was ensured. Nine patients presented for reconstruction of the breast and thorax following radical mastectomy. All were successfully reconstructed with this new technique except one patient. Its many advantages include immediate reconstruction without delayed procedures and no secondary deformity of the donor site. Healthy, well vascularized tissue can now be transferred to a previously irradiated area with no tissue loss. This new method offers many advantages to older methods of reconstruction. Length of hospital stay and immobilization are reduced. The

  4. Natural Hg isotopic composition of different Hg compounds in mammal tissues as a proxy for in vivo breakdown of toxic methylmercury.

    Science.gov (United States)

    Perrot, Vincent; Masbou, Jeremy; Pastukhov, Mikhail V; Epov, Vladimir N; Point, David; Bérail, Sylvain; Becker, Paul R; Sonke, Jeroen E; Amouroux, David

    2016-02-01

    In the last decade, specific attention has been paid to total mercury (HgT) stable isotopic composition, especially in natural samples such as aquatic organisms, due to its potential to track the cycle of this toxic element in the environment. Here, we investigated Hg Compound Specific stable Isotopic Composition (CSIC) of natural inorganic Hg (iHg) and methylmercury (MMHg) in various tissues of aquatic mammals (Beluga whale from the Arctic marine environment and seals from the freshwater lake Baikal, Russia). In seals' organs the variation in mass dependent fractionation (MDF, δ(202)Hg) for total Hg was significantly correlated to the respective fraction of iHg and MMHg compounds, with MMHg being enriched by ∼ 3‰ in heavier isotopes relative to iHg. On the other hand, we observe insignificant variation in Hg mass independent isotope fractionation (MIF, Δ(199)Hg) among iHg and MMHg in all organs for the same mammal species and MMHg in prey items. MIF signatures suggest that both MMHg and iHg in aquatic mammals have the same origin (i.e., MMHg from food), and are representative of Hg photochemistry in the water column of the mammal ecosystem. MDF signatures of Hg compounds indicate that MMHg is demethylated in vivo before being stored in the muscle, and the iHg formed is stored in the liver, and to a lesser extent in the kidney, before excretion. Thus, Hg CSIC analysis in mammals can be a powerful tool for tracing the metabolic response to Hg exposure.

  5. Separation of compounds differing in isotopic composition

    International Nuclear Information System (INIS)

    Sievers, R.E.; Brooks, J.J.

    1976-01-01

    Compounds differing in isotopic composition are separated by introducing a mixture of the compounds into a chromatographic column containing a lanthanide chelate as a stationary phase and eluting from the column a fraction which is at least enriched with one of the compounds of the mixture. 17 claims, no drawings

  6. Separation of compounds differing in isotopic composition

    International Nuclear Information System (INIS)

    Sievers, R.E.; Brooks, J.J.

    1975-01-01

    Compounds differing in isotopic composition are separated by introducing a mixture of the compounds into a chromatographic column containing a lanthanide chelate as a stationary phase and eluting from the column a fraction that is at least enriched with one of the compounds of the mixture. (U.S.)

  7. Compounds, compositions, pharmaceutical compositions, and methods of use

    Science.gov (United States)

    Hammond, Gerald B.; Jin, Zhuang; Bates, Paula J.; Reyes-Reyes, Elsa Merit

    2016-11-15

    Certain embodiments of the invention include compositions comprising a compound of Formula (I), and salts, isomers, and derivatives thereof. Pharmaceutical compositions of some embodiments of the present invention comprise a compound of Formula (I), and salts, isomers, and derivatives thereof. Other embodiments of this invention include methods for treating disease (e.g., cancer) and methods for administering a compound of Formula (I), and salts, isomers, and derivatives thereof.

  8. Compositional differences in the phenolics compounds of ...

    African Journals Online (AJOL)

    This study evaluates phenolic composition of commercial and experimental wines derived from bunch (Vitis vinifera) and muscadine (Vitis rotundifolia) grapes to determine compositional differences in phenolics. HPLC analysis of wines showed that majority of phenolic compounds eluted during the first 30 min. Of the red ...

  9. Biomimetic strategies for engineering composite tissues.

    Science.gov (United States)

    Lee, Nancy; Robinson, Jennifer; Lu, Helen

    2016-08-01

    The formation of multiple tissue types and their integration into composite tissue units presents a frontier challenge in regenerative engineering. Tissue-tissue synchrony is crucial in providing structural support for internal organs and enabling daily activities. This review highlights the state-of-the-art in composite tissue scaffold design, and explores how biomimicry can be strategically applied to avoid over-engineering the scaffold. Given the complexity of biological tissues, determining the most relevant parameters for recapitulating native structure-function relationships through strategic biomimicry will reduce the burden for clinical translation. It is anticipated that these exciting efforts in composite tissue engineering will enable integrative and functional repair of common soft tissue injuries and lay the foundation for total joint or limb regeneration. Copyright © 2016 Elsevier Ltd. All rights reserved.

  10. Atmospheric nitrogen compounds: Occurrence, composition and deposition

    DEFF Research Database (Denmark)

    Nielsen, T.; Pilegaard, K.; Egeløv, A.H.

    1996-01-01

    Traffic in cities and on highways is an important contributor to NOy atmospheric pollution in open areas. In this situation both the concentration and composition of NOy compounds show a wide variation and are dependent on meteorological and atmospheric chemical conditions. The proportion of NOz ...

  11. Computer modeling the boron compound factor in normal brain tissue

    International Nuclear Information System (INIS)

    Gavin, P.R.; Huiskamp, R.; Wheeler, F.J.; Griebenow, M.L.

    1993-01-01

    The macroscopic distribution of borocaptate sodium (Na 2 B 12 H 11 SH or BSH) in normal tissues has been determined and can be accurately predicted from the blood concentration. The compound para-borono-phenylalanine (p-BPA) has also been studied in dogs and normal tissue distribution has been determined. The total physical dose required to reach a biological isoeffect appears to increase directly as the proportion of boron capture dose increases. This effect, together with knowledge of the macrodistribution, led to estimates of the influence of the microdistribution of the BSH compound. This paper reports a computer model that was used to predict the compound factor for BSH and p-BPA and, hence, the equivalent radiation in normal tissues. The compound factor would need to be calculated for other compounds with different distributions. This information is needed to design appropriate normal tissue tolerance studies for different organ systems and/or different boron compounds

  12. Compound Composite Odontoma and Its Management

    Directory of Open Access Journals (Sweden)

    Morawala Abdul

    2014-01-01

    Full Text Available Odontomas are odontogenic benign tumors composed of dental tissue. Majority of these lesions are asymptomatic and are often detected on routine radiographs. They can be thought of as “tooth hamartomas" with the lesion consisting of various tooth components. They are divided histologically into complex odontomas and compound odontomas. This paper describes the case of a compound odontoma in a 13-year-old girl diagnosed due to the retention of the primary right mandibular second molar. A surgical excision was performed without disturbing the unerupted premolar. The results achieved indicate that early diagnosis of odontomas enables adoption of less complex treatment, a better prognosis, and displacement or devitalisation of adjacent tooth.

  13. Compositions containing borane or carborane cage compounds and related applications

    Science.gov (United States)

    Bowen, III, Daniel E; Eastwood, Eric A

    2013-05-28

    Compositions comprising a polymer-containing matrix and a filler comprising a cage compound selected from borane cage compounds, carborane cage compounds, metal complexes thereof, residues thereof, mixtures thereof, and/or agglomerations thereof, where the cage compound is not covalently bound to the matrix polymer. Methods of making and applications for using such compositions are also disclosed.

  14. Stratified scaffold design for engineering composite tissues.

    Science.gov (United States)

    Mosher, Christopher Z; Spalazzi, Jeffrey P; Lu, Helen H

    2015-08-01

    A significant challenge to orthopaedic soft tissue repair is the biological fixation of autologous or allogeneic grafts with bone, whereby the lack of functional integration between such grafts and host bone has limited the clinical success of anterior cruciate ligament (ACL) and other common soft tissue-based reconstructive grafts. The inability of current surgical reconstruction to restore the native fibrocartilaginous insertion between the ACL and the femur or tibia, which minimizes stress concentration and facilitates load transfer between the soft and hard tissues, compromises the long-term clinical functionality of these grafts. To enable integration, a stratified scaffold design that mimics the multiple tissue regions of the ACL interface (ligament-fibrocartilage-bone) represents a promising strategy for composite tissue formation. Moreover, distinct cellular organization and phase-specific matrix heterogeneity achieved through co- or tri-culture within the scaffold system can promote biomimetic multi-tissue regeneration. Here, we describe the methods for fabricating a tri-phasic scaffold intended for ligament-bone integration, as well as the tri-culture of fibroblasts, chondrocytes, and osteoblasts on the stratified scaffold for the formation of structurally contiguous and compositionally distinct regions of ligament, fibrocartilage and bone. The primary advantage of the tri-phasic scaffold is the recapitulation of the multi-tissue organization across the native interface through the layered design. Moreover, in addition to ease of fabrication, each scaffold phase is similar in polymer composition and therefore can be joined together by sintering, enabling the seamless integration of each region and avoiding delamination between scaffold layers. Copyright © 2015 Elsevier Inc. All rights reserved.

  15. Radiation curable compounds for use in coating compositions

    International Nuclear Information System (INIS)

    Friedlander, C.B.; McMullen, J.C.

    1979-01-01

    Radiation curable compounds are disclosed which are derived from the reaction of a siloxy-containing carbinol, a polyisocyanate and polyfunctional compound having hydroxy and acrylic functional groups. The compounds have high cure rates, are compatible with other components of radiation curable, film forming compositions and impart good slip and other properties to cured film coatings. (author)

  16. Mandibular reconstruction with composite microvascular tissue transfer

    Energy Technology Data Exchange (ETDEWEB)

    Coleman, J.J. III; Wooden, W.A. (Emory Univ. School of Medicine, Atlanta, GA (USA))

    1990-10-01

    Microvascular free tissue transfer has provided a variety of methods of restoring vascularized bone and soft tissue to difficult defects created by tumor resection and trauma. Over 7 years, 26 patients have undergone 28 free flaps for mandibular reconstruction, 15 for primary squamous cell carcinoma of the floor of the mouth or tongue, 7 for recurrent tumor, and 6 for other reasons (lymphangioma (1), infection (1), gunshot wound (1), and osteoradionecrosis (3)). Primary reconstruction was performed in 19 cases and secondary in 9. All repairs were composite flaps including 12 scapula, 5 radial forearm, 3 fibula, 2 serratus, and 6 deep circumflex iliac artery. Mandibular defects included the symphysis alone (7), symphysis and body (5), symphysis-body-ramus condyle (2), body or ramus (13), and bilateral body (1). Fourteen patients had received prior radiotherapy to adjuvant or curative doses. Eight received postoperative radiotherapy. All patients had initially successful vascularized reconstruction by clinical examination (28) and positive radionuclide scan (22 of 22). Bony stability was achieved in 25 of 26 patients and oral continence in 24 of 26. One complete flap loss occurred at 14 days. Complications of some degree developed in 22 patients including partial skin necrosis (3), orocutaneous fistula (3), plate exposure (1), donor site infection (3), fracture of reconstruction (1), and fracture of the radius (1). Microvascular transfer of bone and soft tissue allows a reliable reconstruction--despite previous radiotherapy, infection, foreign body, or surgery--in almost every situation in which mandible and soft tissue are absent. Bony union, a healed wound, and reasonable function and appearance are likely despite early fistula, skin loss, or metal plate or bone exposure.

  17. Mechanochemical synthesis of organic compounds and composites with their participation

    International Nuclear Information System (INIS)

    Lyakhov, Nikolai Z; Grigorieva, Tatiana F; Barinova, Antonina P; Vorsina, I A

    2010-01-01

    The results of experimental studies in the mechanochemical synthesis of organic compounds and composites with their participation published over the last 15 years are described systematically. The key reactions of organic compounds are considered: synthesis of the salts of organic acids, acylation, substitution, dehalogenation, esterification, hydrometallation and other reactions. Primary attention is devoted to systems and compounds that cannot be obtained by traditional chemistry methods.

  18. Volatile sulphur compounds composition of monovarietal white wines

    OpenAIRE

    Moreira, Nathalie; Pinho, Paula Guedes de; Santos, Cristina; Vasconcelos, Isabel

    2010-01-01

    The sulphur compounds composition of wines produced experimentally from six white cultivars (Alvarinho, Loureiro, Trajadura, Pedernã, Azal Branco and Avesso) was evaluated during two consecutive vintages. Results show that wines could be differentiated according to their sulphur compounds content. In general, Loureiro, Trajadura and Pedernã cultivars led to wines with low concentrations of sulphur compounds; however, Loureiro wines were characterised by significant amounts of dimethyl sulphon...

  19. Mapping and characterization of iron compounds in Alzheimer's tissue

    International Nuclear Information System (INIS)

    Collingwood, Joanna; Dobson, Jon

    2006-01-01

    Understanding the management of iron in the brain is of great importance in the study of neurodegeneration, where regional iron overload is frequently evident. A variety of approaches have been employed, from quantifying iron in various anatomical structures, to identifying genetic risk factors related to iron metabolism, and exploring chelation approaches to tackle iron overload in neurodegenerative disease. However, the ease with which iron can change valence state ensures that it is present in vivo in a wide variety of forms, both soluble and insoluble. Here, we review recent developments in approaches to locate and identify iron compounds in neurodegenerative tissue. In addition to complementary techniques that allow us to quantify and identify iron compounds using magnetometry, extraction, and electron microscopy, we are utilizing a powerful combined mapping/characterization approach with synchrotron X-rays. This has enabled the location and characterization of iron accumulations containing magnetite and ferritin in human Alzheimer's disease (AD) brain tissue sections in situ at micron-resolution. It is hoped that such approaches will contribute to our understanding of the role of unusual iron accumulations in disease pathogenesis, and optimise the potential to use brain iron as a clinical biomarker for early detection and diagnosis.

  20. Lightweight sheet molding compound (SMC) composites containing cellulose nanocrystals

    Science.gov (United States)

    Amir Asadi; Mark Miller; Arjun V. Singh; Robert J. Moon; Kyriaki Kalaitzidou

    2017-01-01

    A scalable technique was introduced to produce high volume lightweight composites using sheet molding compound (SMC) manufacturing method by replacing 10 wt% glass fibers (GF) with a small amount of cellulose nanocrystals (CNC). The incorporation of 1 and 1.5 wt% CNC by dispersing in the epoxy matrix of short GF/epoxy SMC composites with 25 wt% GF content (25GF/CNC-...

  1. Effect of elevated manganese on the ultraviolet- and blue light-absorbing compounds of cucumber cotyledons and leaf tissues

    International Nuclear Information System (INIS)

    Caldwell, C.R.

    1998-01-01

    The effect of manganese [Mn(II)] on the pigments of cucumber (Cucumis sativus L., cv Poinsett 76) leaf and cotyledon tissues was investigated. Tissue disks (7 mm) were exposed to increasing Mn(II) concentrations from 100 micromolar to 2.5 mM. Acetone (carotenoid-rich fraction) and acidified methanol (flavonoid-rich fraction) extracts were analyzed by high performance liquid chromatography. Although none of the Mn(II)-treated tissues showed visible damage, Mn(II) at concentrations of 250 micromolar and above significantly reduced (60%) the beta-carotene levels of light-incubated leaf tissues. A major Mn(II)-induced, UV-absorbing compound was observed in methanol extracts of cotyledonary tissues exposed to Mn(II) in the dark. In leaf tissues, Mn(II) reduced the levels of certain UV-absorbing compounds under both light conditions. These results demonstrate that excess leaf Mn(II) can rapidly impair isoprenoid metabolism, altering tissue carotenoid composition. Furthermore, Mn(II) may also modify phenylpropanoid metabolism, changing the tissue flavonoid composition. Both situations could sensitize plant tissues to oxidative stresses, particularly enhanced solar UV-B radiation, and may reduce the nutritional quality of leafy vegetables

  2. Tissue-specific composite cell aggregates drive periodontium tissue regeneration by reconstructing a regenerative microenvironment.

    Science.gov (United States)

    Zhu, Bin; Liu, Wenjia; Zhang, Hao; Zhao, Xicong; Duan, Yan; Li, Dehua; Jin, Yan

    2017-06-01

    Periodontitis is the most common cause of periodontium destruction. Regeneration of damaged tissue is the expected treatment goal. However, the regeneration of a functional periodontal ligament (PDL) insertion remains a difficulty, due to complicated factors. Recently, periodontal ligament stem cells (PDLSCs) and bone marrow-derived mesenchymal stem cells (BMMSCs) have been shown to participate in PDL regeneration, both pathologically and physiologically. Besides, interactions affect the biofunctions of different derived cells during the regenerative process. Therefore, the purpose of this study was to discuss the different derived composite cell aggregate (CA) systems of PDLSCs and BMMSCs (iliac-derived or jaw-derived) for periodontium regeneration under regenerative microenvironment reconstruction. Our results showed although all three mono-MSC CAs were compacted and the cells arranged regularly in them, jaw-derived BMMSC (JBMMSC) CAs secreted more extracellular matrix than the others. Furthermore, PDLSC/JBMMSC compound CAs highly expressed ALP, Col-I, fibronectin, integrin-β1 and periostin, suggesting that their biofunction is more appropriate for periodontal structure regeneration. Inspiringly, PDLSC/JBMMSC compound CAs regenerated more functional PDL-like tissue insertions in both nude mice ectopic and minipig orthotopic transplantation. The results indicated that the different derived CAs of PDLSCs/JBMMSCs provided an appropriate regenerative microenvironment facilitating a more stable and regular regeneration of functional periodontium tissue. This method may provide a possible strategy to solve periodontium defects in periodontitis and powerful experimental evidence for clinical applications in the future. Copyright © 2015 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.

  3. Composites structures for bone tissue reconstruction

    Energy Technology Data Exchange (ETDEWEB)

    Neto, W.; Santos, João [Universidade Federal de São Carlos, Departament of Materials Engineering - Rd. Washington Luis, Km 235, 13565-905, São Carlos-SP (Brazil); Avérous, L.; Schlatter, G.; Bretas, Rosario, E-mail: bretas@ufscar.br [Université de Strasbourg, ECPM-LIPHT - 25 rue Becquerel, 67087, Strasbourg (France)

    2015-05-22

    The search for new biomaterials in the bone reconstitution field is growing continuously as humane life expectation and bone fractures increase. For this purpose, composite materials with biodegradable polymers and hydroxyapatite (HA) have been used. A composite material formed by a film, nanofibers and HA has been made. Both, the films and the non-woven mats of nanofibers were formed by nanocomposites made of butylene adipate-co-terephthalate (PBAT) and HA. The techniques used to produce the films and nanofibers were spin coating and electrospinning, respectively. The composite production and morphology were evaluated. The composite showed an adequate morphology and fibers size to be used as scaffold for cell growth.

  4. Composites structures for bone tissue reconstruction

    International Nuclear Information System (INIS)

    Neto, W.; Santos, João; Avérous, L.; Schlatter, G.; Bretas, Rosario

    2015-01-01

    The search for new biomaterials in the bone reconstitution field is growing continuously as humane life expectation and bone fractures increase. For this purpose, composite materials with biodegradable polymers and hydroxyapatite (HA) have been used. A composite material formed by a film, nanofibers and HA has been made. Both, the films and the non-woven mats of nanofibers were formed by nanocomposites made of butylene adipate-co-terephthalate (PBAT) and HA. The techniques used to produce the films and nanofibers were spin coating and electrospinning, respectively. The composite production and morphology were evaluated. The composite showed an adequate morphology and fibers size to be used as scaffold for cell growth

  5. Determination of hydrogen isotope composition in organic compounds

    International Nuclear Information System (INIS)

    Ordzhonikidze, K.G.; Parulava, L.P.; Vakhaniya, G.V.; Tarielashvili, V.O.

    1989-01-01

    method for determination of hydrogen isotope composition just in organic compounds using mass-spectrometer of the second class is suggested. The method enables to determine atomic fraction of hydrogen without multiplet separation. The accuracy of determination of deuterium atomic fraction in acetone in 1-99% range was equal to 3-0.2% respectively

  6. Difference in volatile composition between the pericarp tissue and inner tissue of tomato (Solanum lycopersicum) fruit

    Science.gov (United States)

    Numerous studies have reported the volatile profiles in the whole fruit or pericarp tissue of tomato (Solanum lycopersicum) fruit; however, information is limited on the volatile composition in the inner tissue and its contribution to tomato aroma. For this, the pericarps and inner tissues of “Money...

  7. Biochemical composition of muscle tissue of penaeid prawns

    Digital Repository Service at National Institute of Oceanography (India)

    Achuthankutty, C.T.; Parulekar, A.H.

    Biochemical composition of muscle tissue of females belonging to four species of penaeid prawns, viz. Metapenaeus affinis, M. dobsoni, Penaeus merguiensis and Parapenaeopsis stylifera, inhabiting the coastal waters of Goa, India, was estimated...

  8. Alfalfa stem tissues: Cell wall deposition, composition, and degradability

    NARCIS (Netherlands)

    Jung, H.G.; Engels, F.M.

    2002-01-01

    Declining cell wall degradability of alfalfa (Medicago sativa L.) stems with maturation limits the nutritional value of alfalfa for ruminants. This study characterized changes in cell wall concentration, composition, and degradability by rumen microbes resulting from alfalfa stem tissue

  9. Pre-treated bioactive composite in rat soft tissue

    Energy Technology Data Exchange (ETDEWEB)

    Tirri, T.; Jaakkola, T.; Naerhi, T.; Yli-Urpo, A. [Turku Univ. (Finland). Biomaterials Research and Inst. of Dentistry; Rich, J.; Seppaelae, J. [Helsinki Univ. of Technology, Espoo (Finland). Dept. of Chemical Technology

    2001-07-01

    Effect of in vitro formed calcium phosphate surface on a bioactive composite was studied in rat subcutaneous tissue. Pre-treatment in simulated body fluid (SBF) for 14 days resulted in the formation of calcium phosphate deposites on the composite surface whereas no formation was observed on the copolymer without bioactive glass. Pre-treatment had no effect on short term soft tissue reactions around the copolymer without bioactive glass granules whereas the calcium phosphate surface formed on the composite resulted in delayed healing of the surgical wound. This may be due to mechanical stress caused by rough calcium phosphate surface. (orig.)

  10. Hard tissue compatibility of natural hydroxyapatite/chitosan composite

    International Nuclear Information System (INIS)

    Tang Xiaojun; Gui Lai; Lue Xiaoying

    2008-01-01

    The natural hydroxyapatite/chitosan (NHC) composite is a new synthesized material. The aim of this experiment was to assess the bone tissue compatibility of this NHC composite in vivo. Twenty-four healthy New Zealand rabbits were included in this study. Of those, 20 were used as the experimental group and four as the control group. In the experimental group, animals receive a cranium defect procedure and NHC composite repair. In the control group, animals underwent the cranium defect procedure without NHC composite repair. At 1, 4, 12, 24, and 40 weeks after surgery, the animals were sacrificed and samples were taken and assessed by gross observation, three-dimensional (3D) computerized tomographic (CT) reconstruction, histology and scanning electron microscope. Our results showed that at 1 week after repairing the bone defect with the NHC composite in the experimental group, new bone appeared around the composite and matured gradually. At 24 weeks after surgery, there were little collagenous tissues present between the material and surrounding bones. At 40 weeks after surgery, new bone had grown into the mature bone and total osseointegration had occurred. In the control group, however, no bone defect healing was observed at 40 weeks after surgery. All these results of the present in vivo work suggest that the NHC composite has a good hard tissue biocompatibility and an excellent osteoconductivity. It is suitable for artificial bone implants and frame materials of tissue engineering.

  11. Hard tissue compatibility of natural hydroxyapatite/chitosan composite

    Energy Technology Data Exchange (ETDEWEB)

    Tang Xiaojun; Gui Lai [Department of Cranio-maxillofacial Surgery, Plastic Surgery Hospital, Chinese Academy of Medical Sciences and Peking Union Medical College, 33 Ba-Da-Chu Road, Beijing, 100144 (China); Lue Xiaoying [State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing, 210096 (China)], E-mail: laiguiplastic@tom.com, E-mail: luxy@seu.edu.cn

    2008-12-15

    The natural hydroxyapatite/chitosan (NHC) composite is a new synthesized material. The aim of this experiment was to assess the bone tissue compatibility of this NHC composite in vivo. Twenty-four healthy New Zealand rabbits were included in this study. Of those, 20 were used as the experimental group and four as the control group. In the experimental group, animals receive a cranium defect procedure and NHC composite repair. In the control group, animals underwent the cranium defect procedure without NHC composite repair. At 1, 4, 12, 24, and 40 weeks after surgery, the animals were sacrificed and samples were taken and assessed by gross observation, three-dimensional (3D) computerized tomographic (CT) reconstruction, histology and scanning electron microscope. Our results showed that at 1 week after repairing the bone defect with the NHC composite in the experimental group, new bone appeared around the composite and matured gradually. At 24 weeks after surgery, there were little collagenous tissues present between the material and surrounding bones. At 40 weeks after surgery, new bone had grown into the mature bone and total osseointegration had occurred. In the control group, however, no bone defect healing was observed at 40 weeks after surgery. All these results of the present in vivo work suggest that the NHC composite has a good hard tissue biocompatibility and an excellent osteoconductivity. It is suitable for artificial bone implants and frame materials of tissue engineering.

  12. Alveolar bone tissue engineering using composite scaffolds for drug delivery

    Directory of Open Access Journals (Sweden)

    Tomonori Matsuno

    2010-08-01

    Full Text Available For many years, bone graft substitutes have been used to reconstruct bone defects in orthopedic and dental fields. However, synthetic bone substitutes such as hydroxyapatite or β-tricalcium phosphate have no osteoinductive or osteogenic abilities. Bone tissue engineering has also been promoted as an alternative approach to regenerating bone tissue. To succeed in bone tissue engineering, osteoconductive scaffolding biomaterials should provide a suitable environment for osteogenic cells and provide local controlled release of osteogenic growth factors. In addition, the scaffold for the bone graft substitute should biodegrade to replace the newly formed bone. Recent advances in bone tissue engineering have allowed the creation of composite scaffolds with tailored functional properties. This review focuses on composite scaffolds that consist of synthetic ceramics and natural polymers as drug delivery carriers for alveolar bone tissue engineering.

  13. Compositions comprising a polypeptide having cellulolytic enhancing activity and a bicycle compound and uses thereof

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Feng; Sweeney, Matthew; Quinlan, Jason

    2015-06-16

    The present invention relates to compositions comprising: a polypeptide having cellulolytic enhancing activity and a bicyclic compound. The present invention also relates to methods of using the compositions.

  14. Compositions comprising a polypeptide having cellulolytic enhancing activity and a quinone compound and uses thereof

    Science.gov (United States)

    Quinlan, Jason; Xu, Feng; Sweeney, Matthew

    2016-03-01

    The present invention relates to compositions comprising: a polypeptide having cellulolytic enhancing activity and a quinone compound. The present invention also relates to methods of using the compositions.

  15. Chitosan Composites for Bone Tissue Engineering—An Overview

    Directory of Open Access Journals (Sweden)

    Jayachandran Venkatesan

    2010-08-01

    Full Text Available Bone contains considerable amounts of minerals and proteins. Hydroxyapatite [Ca10(PO46(OH2] is one of the most stable forms of calcium phosphate and it occurs in bones as major component (60 to 65%, along with other materials including collagen, chondroitin sulfate, keratin sulfate and lipids. In recent years, significant progress has been made in organ transplantation, surgical reconstruction and the use of artificial protheses to treat the loss or failure of an organ or bone tissue. Chitosan has played a major role in bone tissue engineering over the last two decades, being a natural polymer obtained from chitin, which forms a major component of crustacean exoskeleton. In recent years, considerable attention has been given to chitosan composite materials and their applications in the field of bone tissue engineering due to its minimal foreign body reactions, an intrinsic antibacterial nature, biocompatibility, biodegradability, and the ability to be molded into various geometries and forms such as porous structures, suitable for cell ingrowth and osteoconduction. The composite of chitosan including hydroxyapatite is very popular because of the biodegradability and biocompatibility in nature. Recently, grafted chitosan natural polymer with carbon nanotubes has been incorporated to increase the mechanical strength of these composites. Chitosan composites are thus emerging as potential materials for artificial bone and bone regeneration in tissue engineering. Herein, the preparation, mechanical properties, chemical interactions and in vitro activity of chitosan composites for bone tissue engineering will be discussed.

  16. Polyhydroxyalkanoate (PHA)/inorganic phase composites for tissue engineering applications.

    Science.gov (United States)

    Misra, Superb K; Valappil, Sabeel P; Roy, Ipsita; Boccaccini, Aldo R

    2006-08-01

    Polyhydroxyalkanoates are emerging as a class of biodegradable polymers for applications in tissue engineering. Members of the polyhydroxyalkanoates family encompass a wide variety of materials, from hard and brittle materials to soft and elastomeric. Over the years, efforts have been made to extend the group of polyhydroxyalkanoates and to investigate their use in numerous biomedical applications, such as sutures, cardiovascular patches, wound dressings, guided tissue repair/regeneration devices, and tissue engineering scaffolds. Along with the development of polyhydroxyalkanoates, researchers have looked into the possibility of designing composites in combination with inorganic phases to further improve the mechanical properties, rate of degradation, and also impart bioactivity. Poly(3-hydroxybutyrate), poly(3-hydroxybutyrate-co-3-hydroxyvalerate), and poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) are some of the polymers which have been studied extensively to fabricate composites in combination with hydroxyapatite, bioactive glass, and glass-ceramic fillers or coatings. This paper reviews international research carried out toward development of polyhydroxyalkanoates/inorganic phase composites in terms of systems investigated, microstructures, properties achieved, and applications, with special focus on tissue engineering scaffolds. A comparison between different composite systems developed in the past few years is presented. The paper also addresses the prospect of potential further development of polyhydroxyalkanoates/inorganic phase composites with optimized microstructure and properties for improved tissue engineering scaffolds.

  17. Chemical Composition and Bioactive Compounds of Some Wild Edible Mushrooms

    Directory of Open Access Journals (Sweden)

    Melinda NAGY

    2017-05-01

    Full Text Available Over the last decades, the consumption of mushrooms has significantly increased due to the scientific evidence of their ability to help the organism in the combat and prevention of several diseases (Kalac, 2009. Fruiting bodies of mushrooms are consumed as a delicacy for their texture and flavour, but also for their nutritional properties that makes them even more attractable (Heleno S. 2015. In this paper data were collected from several scientific studies with the aim to characterize the chemical composition and content of bioactive compounds of various mushrooms species: Agaricus bisporus, Boletus edulis, Cantharellus cibarius, Pleurotus ostreatus, Lactarius piperatus. The chemical composition of 5 wild edible studied mushrooms, including moisture, ash, total carbohydrates, total sugars, crude fat, crude protein and energy were determined according to AOAC procedures.

  18. Compositing water samples for analysis of volatile organic compounds

    Science.gov (United States)

    Lopes, T.J.; Fallon, J.D.; Maluk, T.L.

    2000-01-01

    Accurate mean concentrations of volatile organic compounds (VOCs) can easily and economically be obtained from a single VOC analysis by using proven methods of collecting representative, discrete water samples and compositing them with a gas-tight syringe. The technique can be used in conjunction with chemical analysis by a conventional laboratory, field-portable equipment, or a mobile laboratory. The type of mean concentration desired depends on the objectives of monitoring. For example, flow-weighted mean VOC concentrations can be used to estimate mass loadings in wastewater and urban storm water, and spatially integrated mean VOC concentrations can be used to assess sources of drinking water (e.g., reservoirs and rivers). The mean error in a discrete sample due to compositing is about 2% for most VOC concentrations greater than 0.1 ??g/L. The total error depends on the number of discrete samples comprising the composite sample and precision of the chemical analysis.Accurate mean concentrations of volatile organic compounds (VOCs) can easily and economically be obtained from a single VOC analysis by using proven methods of collecting representative, discrete water samples and compositing them with a gas-tight syringe. The technique can be used in conjunction with chemical analysis by a conventional laboratory, field-portable equipment, or a mobile laboratory. The type of mean concentration desired depends on the objectives of monitoring. For example, flow-weighted mean VOC concentrations can be used to estimate mass loadings in wastewater and urban storm water, and spatially integrated mean VOC concentrations can be used to assess sources of drinking water (e.g., reservoirs and rivers). The mean error in a discrete sample due to compositing is about 2% for most VOC concentrations greater than 0.1 ??g/L. The total error depends on the number of discrete samples comprising the composite sample and precision of the chemical analysis.Researchers are able to derive

  19. A Review of the Tissue Residue Approach for Organic and Organometallic Compounds in Aquatic Organisms

    Science.gov (United States)

    This paper reviews the tissue residue approach (TRA) for toxicity assessment as it applies to organic chemicals and some organometallic compounds (tin, mercury, and lead). Specific emphasis was placed on evaluating key factors that influence interpretation of critical body resid...

  20. Method of tissue repair using a composite material

    Science.gov (United States)

    Hutchens, Stacy A; Woodward, Jonathan; Evans, Barbara R; O'Neill, Hugh M

    2014-03-18

    A composite biocompatible hydrogel material includes a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa. A calcium comprising salt is disposed in at least some of the pores. The porous polymer matrix can comprise cellulose, including bacterial cellulose. The composite can be used as a bone graft material. A method of tissue repair within the body of animals includes the steps of providing a composite biocompatible hydrogel material including a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa, and inserting the hydrogel material into cartilage or bone tissue of an animal, wherein the hydrogel material supports cell colonization in vitro for autologous cell seeding.

  1. Method of tissue repair using a composite material

    Energy Technology Data Exchange (ETDEWEB)

    Hutchens, Stacy A.; Woodward, Jonathan; Evans, Barbara R.; O' Neill, Hugh M.

    2016-03-01

    A composite biocompatible hydrogel material includes a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa. A calcium comprising salt is disposed in at least some of the pores. The porous polymer matrix can comprise cellulose, including bacterial cellulose. The composite can be used as a bone graft material. A method of tissue repair within the body of animals includes the steps of providing a composite biocompatible hydrogel material including a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa, and inserting the hydrogel material into cartilage or bone tissue of an animal, wherein the hydrogel material supports cell colonization in vitro for autologous cell seeding.

  2. Method of tissue repair using a composite material

    Energy Technology Data Exchange (ETDEWEB)

    Hutchens, Stacy A; Woodward, Jonathan; Evans, Barbara R; O' Neill, Hugh M

    2014-03-18

    A composite biocompatible hydrogel material includes a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa. A calcium comprising salt is disposed in at least some of the pores. The porous polymer matrix can comprise cellulose, including bacterial cellulose. The composite can be used as a bone graft material. A method of tissue repair within the body of animals includes the steps of providing a composite biocompatible hydrogel material including a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa, and inserting the hydrogel material into cartilage or bone tissue of an animal, wherein the hydrogel material supports cell colonization in vitro for autologous cell seeding.

  3. 'Reference composition' not 'lead compound': recent developments in case law for obviousness of pharmaceutical composition claims.

    Science.gov (United States)

    Highlander, Steven L; Voges, Mark H

    2012-09-01

    For most chemical compound claims, the obviousness analysis begins with the identification of a 'lead compound'. Pursuant to a recent decision from the Federal Circuit, a similar framework is now applicable for pharmaceutical composition claims. In Unigene Labs v. Apotex (2011), the obviousness analysis for a claim covering a bioequivalent nasal spray was said to start with the identification of the 'reference composition'. The court reasoned that while a person of ordinary skill in the art would typically be motivated to develop a bioequivalent of a given US FDA-approved reference composition, such a new composition may still be non-obvious if the prior art does not teach which bioequivalent among a large number of possible formulations is the best or which ingredient(s) may be substituted for others. A review of the case law reveals that the "reference composition" framework is neither entirely new nor universally applicable to all obviousness challenges to pharmaceutical composition claims. Even so, the Unigene decision appears to signal the court's preference for this framework and will likely employ it wherever it is appropriate to do so.

  4. Factors affecting the tissues composition of pork belly.

    Science.gov (United States)

    Duziński, K; Knecht, D; Lisiak, D; Janiszewski, P

    2015-11-01

    Bellies derived from the commercial population of pig carcasses are diverse in terms of tissue composition. Knowledge of the factors influencing it and the expected results, permits quick and easy evaluation of raw material. The study was designed to determine the factors affecting the tissues composition of pork bellies and to estimate their lean meat content. The research population (n=140 pig carcasses) was divided into groups according to sex (gilts, barrows), half-carcass mass (meat content class: S (⩾60%), E (55% to 60%), U (50% to 55%), R (meat content affected the growth of the fat and skin mass in a linear way. No differences were observed between class S and E in terms of belly muscle mass. A 0.37% higher share of belly in the half-carcass was found for barrows (Pmeat content in bellies, suggesting they may be used directly in the production line.

  5. Procurement strategies for combined multiorgan and composite tissues for transplantation.

    Science.gov (United States)

    Datta, Néha; Yersiz, Hasan; Kaldas, Fady; Azari, Kodi

    2015-04-01

    The purpose of this article is to identify the unique aspects of combined multiorgan and vascularized composite allograft (VCA) procurement from deceased donors and outline the steps essential for success. Transplantation of nonsolid organ composite tissues is becoming a viable option for reconstruction of massive tissue defects. With the United Network for Organ Sharing designation of VCAs as organs, placing them under the domain of the Organ Procurement and Transplantation Network, a systematic method for combined solid organ and VCA procurement is required. Several centers have reported experience with successful procurement strategies including sequential and simultaneous retrievals. The published literature describing donor screening, sequence of procurement with relation to solid organs and allocation is reviewed. With the 2013 classification of VCAs as organs, the Organ Procurement and Transplantation Network and United Network for Organ Sharing are better suited to aligning procurement and allocation policies. As VCA transplantation becomes more commonplace, protocol guidelines will ensure smooth integration with existing procurement infrastructure.

  6. Comparison of phenolic composition of healthy apple tissues and tissues affected by bitter pit.

    Science.gov (United States)

    Zupan, Anka; Mikulic-Petkovsek, Maja; Cunja, Vlasta; Stampar, Franci; Veberic, Robert

    2013-12-11

    Bitter pit is an important Ca(2+) deficiency disorder of apple fruit (Malus domestica Borkh.), with symptoms, necrotic spots, developing during storage. The objective of this study was to determine phenolic compounds and their contents in bitter pit in comparison to healthy skin and pulp using HPLC-MS(2). The experiment was carried out on three cultivars 'Jonagored', 'Golden Delicious' and 'Pinova'. All 15 determined phenolic compounds in pulp tissues specifically affected by bitter pit were higher than those in healthy pulp. Chlorogenic acid and catechin were to 5 times higher in those affected pulp tissues. Higher content was also determined for hydroxycinnamic acids and flavanols in the peel above the bitter pit; in contrast, flavonols and anthocyanins were higher in healthy peel. Anthocyanins in healthy peel of cultivar 'Jonagored' were 10 times higher from the content in peel above the bitter pit.

  7. Complementary analysis of tissue homogenates composition obtained by Vis and NIR laser excitations and Raman spectroscopy.

    Science.gov (United States)

    Staniszewska-Slezak, Emilia; Malek, Kamilla; Baranska, Malgorzata

    2015-08-05

    Raman spectroscopy and four excitation lines in the visible (Vis: 488, 532, 633 nm) and near infrared (NIR: 785 nm) were used for biochemical analysis of rat tissue homogenates, i.e. myocardium, brain, liver, lung, intestine, and kidney. The Vis Raman spectra are very similar for some organs (brain/intestines and kidney/liver) and dominated by heme signals when tissues of lung and myocardium were investigated (especially with 532 nm excitation). On the other hand, the NIR Raman spectra are specific for each tissue and more informative than the corresponding ones collected with the Vis excitations. The spectra analyzed without any special pre-processing clearly illustrate different chemical composition of each tissue and give information about main components e.g. lipids or proteins, but also about the content of some specific compounds such as amino acid residues, nucleotides and nucleobases. However, in order to obtain the whole spectral information about tissues complex composition the spectra of Vis and NIR excitations should be collected and analyzed together. A good agreement of data gathered from Raman spectra of the homogenates and those obtained previously from Raman imaging of the tissue cross-sections indicates that the presented here approach can be a method of choice for an investigation of biochemical variation in animal tissues. Moreover, the Raman spectral profile of tissue homogenates is specific enough to be used for an investigation of potential pathological changes the organism undergoes, in particular when supported by the complementary FTIR spectroscopy. Copyright © 2015 Elsevier B.V. All rights reserved.

  8. Variation in the chemical composition of wheat straw: the role of tissue ratio and composition.

    Science.gov (United States)

    Collins, Samuel Ra; Wellner, Nikolaus; Martinez Bordonado, Isabel; Harper, Andrea L; Miller, Charlotte N; Bancroft, Ian; Waldron, Keith W

    2014-01-01

    Wheat straw is an attractive substrate for second generation ethanol production because it will complement and augment wheat production rather than competing with food production. However, like other sources of lignocellulosic biomass, even from a single species, it is heterogeneous in nature due to the different tissues and cell types, and this has implications for saccharification efficiency. The aim of this study has been to use Fourier transform infrared (FTIR) spectroscopy and Partial least squares (PLS) modelling to rapidly screen wheat cultivars for the levels of component tissues, the carbohydrate composition and lignin content, and the levels of simple cross-linking phenolics such as ferulic and diferulic acids. FTIR spectroscopy and PLS modelling was used to analyze the tissue and chemical composition of wheat straw biomass. Predictive models were developed to evaluate the variability in the concentrations of the cell wall sugars, cell wall phenolics and acid-insoluble lignin. Models for the main sugars, phenolics and lignin were validated and then used to evaluate the variation in total biomass composition across 90 cultivars of wheat grown over two seasons. Whilst carbohydrate and lignin components varied across the varieties, this mainly reflected differences in the ratios of the component tissues rather than differences in the composition of those tissues. Further analysis indicated that on a mol% basis, relative levels of sugars within the tissues varied to only a small degree. There were no clear associations between simple phenolics and tissues. The results provide a basis for improving biomass quality for biofuels production through selection of cultivars with appropriate tissue ratios.

  9. Therapeutic application of T regulatory cells in composite tissue allotransplantation

    Directory of Open Access Journals (Sweden)

    Jeong-Hee Yang

    2017-10-01

    Full Text Available Abstract With growing number of cases in recent years, composite tissue allotransplantation (CTA has been improving the quality of life of patient who seeks reconstruction and repair of damaged tissues. Composite tissue allografts are heterogeneous. They are composed of a variety of tissue types, including skin, muscle, vessel, bone, bone marrow, lymph nodes, nerve, and tendon. As a primary target of CTA, skin has high antigenicity with a rich repertoire of resident cells that play pivotal roles in immune surveillance. In this regard, understanding the molecular mechanisms involved in immune rejection in the skin would be essential to achieve successful CTA. Although scientific evidence has proved the necessity of immunosuppressive drugs to prevent rejection of allotransplanted tissues, there remains a lingering dilemma due to the lack of specificity of targeted immunosuppression and risks of side effects. A cumulative body of evidence has demonstrated T regulatory (Treg cells have critical roles in induction of immune tolerance and immune homeostasis in preclinical and clinical studies. Presently, controlling immune susceptible characteristics of CTA with adoptive transfer of Treg cells is being considered promising and it has drawn great interests. This updated review will focus on a dominant form of Treg cells expressing CD4+CD25+ surface molecules and a forkhead box P3 transcription factor with immune tolerant and immune homeostasis activities. For future application of Treg cells as therapeutics in CTA, molecular and cellular characteristics of CTA and immune rejection, Treg cell development and phenotypes, Treg cell plasticity and stability, immune tolerant functions of Treg cells in CTA in preclinical studies, and protocols for therapeutic application of Treg cells in clinical settings are addressed in this review. Collectively, Treg cell therapy in CTA seems feasible with promising perspectives. However, the extreme high immunogenicity

  10. Prediction of drug distribution in subcutaneous xenografts of human tumor cell lines and healthy tissues in mouse: application of the tissue composition-based model to antineoplastic drugs.

    Science.gov (United States)

    Poulin, Patrick; Chen, Yung-Hsiang; Ding, Xiao; Gould, Stephen E; Hop, Cornelis Eca; Messick, Kirsten; Oeh, Jason; Liederer, Bianca M

    2015-04-01

    Advanced tissue composition-based models can predict the tissue-plasma partition coefficient (Kp ) values of drugs under in vivo conditions on the basis of in vitro and physiological input data. These models, however, focus on healthy tissues and do not incorporate data from tumors. The objective of this study was to apply a tissue composition-based model to six marketed antineoplastic drugs (docetaxel, DOC; doxorubicin, DOX; gemcitabine, GEM; methotrexate, MTX; topotecan, TOP; and fluorouracil, 5-FU) to predict their Kp values in three human tumor xenografts (HCT-116, H2122, and PC3) as well as in healthy tissues (brain, muscle, lung, and liver) under steady-state in vivo conditions in female NCR nude mice. The mechanisms considered in the tissue/tumor composition-based model are the binding to lipids and to plasma proteins, but the transporter effect was also investigated. The method consisted of analyzing tissue composition, performing the pharmacokinetics studies in mice, and calculating the corresponding in vivo Kp values. Analyses of tumor composition indicated that the tumor xenografts contained no or low amounts of common transporters by contrast to lipids. The predicted Kp values were within twofold and threefold of the measured values in 77% and 93% of cases, respectively. However, predictions for brain for each drug, for liver for MTX, and for each tumor xenograft for GEM were disparate from the observed values, and, therefore, not well served by the model. Overall, this study is the first step toward the mechanism-based prediction of Kp values of small molecules in healthy and tumor tissues in mouse when no transporter and permeation limitation effect is evident. This approach will be useful in selecting compounds based on their abilities to penetrate human cancer xenografts with a physiologically based pharmacokinetic (PBPK) model, thereby increasing therapeutic index for chemotherapy in oncology study. © 2015 Wiley Periodicals, Inc. and the American

  11. Composition and method for stabilizing radiolabelled compounds using thiocarbonylated diethylenetriamines

    International Nuclear Information System (INIS)

    Tzodikov, N.R.

    1984-01-01

    Radiolabelled compounds, such as amino acids, nucleosides, vitamins and drugs, are stabilised against radiolytic decomposition by adding a solution of a thiocarbonylated diethylenetriamine to a solution of the radiolabelled compound. (author)

  12. Siloxane urethane acrylate radiation curable compounds for use in coating compositions

    International Nuclear Information System (INIS)

    Friedlander, C.B.; McMullen, J.C.

    1978-01-01

    Radiation curable compounds are disclosed which are derived from the reaction of siloxy-containing carbinol, a polyisocyanate and a polyfunctional compound having hydroxy and acrylic functional groups. The compounds have high cure rates, are compatible with other components of radiation curable, film forming compositions and impart good slip and other properties to cured film coatings

  13. Boron cage compound materials and composites for shielding and absorbing neutrons

    Science.gov (United States)

    Bowen, III, Daniel E; Eastwood, Eric A

    2014-03-04

    Boron cage compound-containing materials for shielding and absorbing neutrons. The materials include BCC-containing composites and compounds. BCC-containing compounds comprise a host polymer and a BCC attached thereto. BCC-containing composites comprise a mixture of a polymer matrix and a BCC filler. The BCC-containing materials can be used to form numerous articles of manufacture for shielding and absorbing neutrons.

  14. Extraction and characterization of candidate bioactive compounds in different tissues from salmon (Salmo salar)

    DEFF Research Database (Denmark)

    Falkenberg, Susan Skanderup; Mikalsen, S. O.; Joensen, H.

    2014-01-01

    There is an interest in bioprospecting organisms from the aquatic environment to find novel bioactive compounds with health promoting or other functional properties. The aim of this study was to evaluate extracts from untreated and heat-treated salmon tissues for their radical scavenging activities...... and for their ability to inhibit activity of the proteases angiotensin I-converting enzyme (ACE) and dipeptidyl peptidase 4 (DPP-4). In vitro assays were used to detect these activities and the corresponding candidate bioactive compounds were characterized by LC-MS/MS.Radical scavenging activity was detected in ... not contain standard unmodified amino acids, indicating peptides with modified amino acids or other kinds of molecules.Industrial relevance. Bioprospecting in fish tissue traditionally regarded as waste can lead to detection of novel natural bioactive compounds including peptides, which could have nutritional...

  15. Composition of MRI phantom equivalent to human tissues

    International Nuclear Information System (INIS)

    Kato, Hirokazu; Kuroda, Masahiro; Yoshimura, Koichi; Yoshida, Atsushi; Hanamoto, Katsumi; Kawasaki, Shoji; Shibuya, Koichi; Kanazawa, Susumu

    2005-01-01

    We previously developed two new MRI phantoms (called the CAG phantom and the CAGN phantom), with T1 and T2 relaxation times equivalent to those of any human tissue at 1.5 T. The conductivity of the CAGN phantom is equivalent to that of most types of human tissue in the frequency range of 1 to 130 MHz. In this paper, the relaxation times of human tissues are summarized, and the composition of the corresponding phantoms are provided in table form. The ingredients of these phantoms are carrageenan as the gelling agent, GdCl 3 as a T1 modifier, agarose as a T2 modifier, NaCl (CAGN phantom only) as a conductivity modifier, NaN 3 as an antiseptic, and distilled water. The phantoms have T1 values of 202-1904 ms and T2 values of 38-423 ms when the concentrations of GdCl 3 and agarose are varied from 0-140 μmol/kg, and 0%-1.6%, respectively, and the CAGN phantom has a conductivity of 0.27-1.26 S/m when the NaCl concentration is varied from 0%-0.7%. These phantoms have sufficient strength to replicate a torso without the use of reinforcing agents, and can be cut by a knife into any shape. We anticipate the CAGN phantom to be highly useful and practical for MRI and hyperthermia-related research

  16. Microstructural and compositional Evolution of Compound Layers during Gaseous Nitrocarburizing

    DEFF Research Database (Denmark)

    Du, Hong; Somers, Marcel A.J.; Ågren, John

    2000-01-01

    Compound layers developed at 848 K during gaseous nitrocarburizing of iron and iron-carbon specimens were investigated for several combinations of N and C activities imposed at the specimen surface by gas mixtures of NH3, N2, CO2 and CO. The microstructural evolution of the compound layer was stu...

  17. Effects of thiosulfonates on the lipid composition of rat tissues

    Directory of Open Access Journals (Sweden)

    A. Z. Pylypets

    2017-12-01

    Full Text Available Thiosulfonates are synthetic analogs of organic sulfur-containing compounds isolated from plants. Recent studies have shown that these substances lowering cholesterol content in the body, are effective against hyperlipidemia. Therefore, the aim of our investigation was to study the effect of synthesized thiosulfonates on the content of lipids and their spectrum in rats blood, liver and kidney. The amount of total lipids and their fractional profile were determined by thin-layer chromatography. The administration of methyl-, ethyl-, and allylthiosulfonates at a dose of 300 mg/kg of body weight did not cause significant changes in the content of total lipids and phospholipids, but led to the redistribution of their classes in the examined tissues. The content of triacylglycerols in the blood plasma under the action of ethyl- and allylthiosulfonates was decreased by 29.14 and 23.19% (P < 0.05-0.01, respectively, whereas the injection with methyl- and ethylthiosulfonates was accompanied by a significant decrease in mono-, di-, triglycerides and free fatty acids in the liver compared to control. The most significant changes in the lipid profile of kidney tissue were detected under the action of methylthiosulfonate.

  18. Fabrication and characterisation of composites materials similar optically and in composition to native dental tissues

    Science.gov (United States)

    Seredin, P. V.; Goloshchapov, D. L.; Prutskij, T.; Ippolitov, Yu. A.

    This study investigated the luminescence characteristics of synthesized biocomposites similar in organic and mineral composition to native dental tissues, enamel and dentine. It was found that the luminescence spectrum of intact enamel is similar to that of calcium hydroxyapatite (HAP) used to synthesize biomimetic materials. Despite the morphological differences between the synthesized biocomposite and native tissue, their luminescence spectra suggest that the shape of the luminescence spectrum is more influenced by defects in the crystal structure of the employed hydroxyapatite than by the structure and order of the apatite nanocrystals typical of native dental tissues. The spectrum of intact human dentine possessed a wider luminescence band, unlike that of enamel, with a maximum typical of intact dentine. Analysis of the spectra of biomimetic material modelling the properties of dentine indicated that both the organic and non-organic components contribute to their luminescence.

  19. Fabrication and characterisation of composites materials similar optically and in composition to native dental tissues

    Directory of Open Access Journals (Sweden)

    P.V. Seredin

    Full Text Available This study investigated the luminescence characteristics of synthesized biocomposites similar in organic and mineral composition to native dental tissues, enamel and dentine. It was found that the luminescence spectrum of intact enamel is similar to that of calcium hydroxyapatite (HAP used to synthesize biomimetic materials. Despite the morphological differences between the synthesized biocomposite and native tissue, their luminescence spectra suggest that the shape of the luminescence spectrum is more influenced by defects in the crystal structure of the employed hydroxyapatite than by the structure and order of the apatite nanocrystals typical of native dental tissues. The spectrum of intact human dentine possessed a wider luminescence band, unlike that of enamel, with a maximum typical of intact dentine. Analysis of the spectra of biomimetic material modelling the properties of dentine indicated that both the organic and non-organic components contribute to their luminescence.

  20. In-situ Characterization and Mapping of Iron Compounds in Alzheimer's Tissue

    International Nuclear Information System (INIS)

    Collingwood, J.F.; Mikhaylova, A.; Davidson, M.; Batich, C.; Streit, W.J.; Terry, J.; Dobson, J.

    2005-01-01

    There is a well-established link between iron overload in the brain and pathology associated with neurodegeneration in a variety of disorders such as Alzheimer's (AD), Parkinson's (PD) and Huntington's (HD) diseases. This association was first discovered in AD by Goodman in 1953, where, in addition to abnormally high concentrations of iron in autopsy brain tissue, iron has also been shown to accumulate at sites of brain pathology such as senile plaques. However, since this discovery, progress in understanding the origin, role and nature of iron compounds associated with neurodegeneration has been slow. Here we report, for the first time, the location and characterization of iron compounds in human AD brain tissue sections. Iron fluorescence was mapped over a frontal-lobe tissue section from an Alzheimer's patient, and anomalous iron concentrations were identified using synchrotron X-ray absorption techniques at 5 (micro)m spatial resolution. Concentrations of ferritin and magnetite, a magnetic iron oxide potentially indicating disrupted brain-iron metabolism, were evident. These results demonstrate a practical means of correlating iron compounds and disease pathology in-situ and have clear implications for disease pathogenesis and potential therapies.

  1. On the use of 31P NMR for the quantification of hydrosoluble phosphorus-containing compounds in coral host tissues and cultured zooxanthellae.

    Science.gov (United States)

    Godinot, Claire; Gaysinski, Marc; Thomas, Olivier P; Ferrier-Pagès, Christine; Grover, Renaud

    2016-02-23

    (31)P Nuclear Magnetic Resonance (NMR) was assessed to investigate the phosphorus-containing compounds present in the tissues of the scleractinian coral Stylophora pistillata as well as of cultured zooxanthellae (CZ). Results showed that phosphorus-containing compounds observed in CZ were mainly phosphate and phosphate esters. Phosphate accounted for 19 ± 2% of the total phosphorus compounds observed in CZ maintained under low P-levels (0.02 μM). Adding 5 mM of dissolved inorganic phosphorus (KH2PO4) to the CZ culture medium led to a 3.1-fold increase in intracellular phosphate, while adding 5 mM of dissolved organic phosphorus led to a reduction in the concentration of phosphorus compounds, including a 2.5-fold intracellular phosphate decrease. In sharp contrast to zooxanthellae, the host mainly contained phosphonates, and to a lesser extent, phosphate esters and phosphate. Two-months of host starvation decreased the phosphate content by 2.4 fold, while bleaching of fed corals did not modify this content. Based on (31)P NMR analyses, this study highlights the importance of phosphonates in the composition of coral host tissues, and illustrates the impact of phosphorus availability on the phosphorus composition of host tissues and CZ, both through feeding of the host and inorganic phosphorus enrichment of the CZ.

  2. Compound composite odontome erupting into the oral cavity: A rare entity

    Directory of Open Access Journals (Sweden)

    Sunira Chandra

    2010-01-01

    Full Text Available Odontomas are the most common odontogenic tumors. They are usually asymptomatic and are often discovered during routine radiography. Eruption of an odontome into the oral cavity is rare. Odontomas are the most common odontogenic tumors. They are usually asymptomatic and are often discovered during routine radiography. Eruption of an odontome into the oral cavity is rare. We report an unusual case of erupting compound composite odontoma. we report an unusual case of erupting compound composite odontoma.

  3. High-resolution x-ray absorption spectroscopy studies of metal compounds in neurodegenerative brain tissue

    Science.gov (United States)

    Collingwood, J. F.; Mikhaylova, A.; Davidson, M. R.; Batich, C.; Streit, W. J.; Eskin, T.; Terry, J.; Barrea, R.; Underhill, R. S.; Dobson, J.

    2005-01-01

    Fluorescence mapping and microfocus X-ray absorption spectroscopy are used to detect, locate and identify iron biominerals and other inorganic metal accumulations in neurodegenerative brain tissue at sub-cellular resolution (autopsy brain tissue. Technical developments include use of microfocus diffraction to obtain structural information about biominerals in-situ, and depositing sample location grids by lithography for the location of anomalies by conventional microscopy. The combined techniques provide a breakthrough in the study of both intra- and extra-cellular iron compounds and related metals in tissue. The information to be gained from this approach has implications for future diagnosis and treatment of neurodegeneration, and for our understanding of the mechanisms involved.

  4. Effect of Boron and Phosphate compounds on Thermal and Fire Properties of wood/HDPE composites

    Science.gov (United States)

    Turgay Akbulut; Nadir Ayrilmis; Turker Dundar; Ali Durmus; Robert H. White; Murat Teker

    2011-01-01

    Melting and non-isothermal crystallization behaviors, oxidative induction time, and fire performance of the injection-molded wood flour-high density polyethylene (HDPE) composites (WPCs) incorporated with different levels (4, 8, or 12 wt %) of boron compounds [borax/boric acid (BX/BA) (0.5:0.5 wt %), zinc borate (ZB)] and phosphorus compounds [mono- and di-ammonium...

  5. Chemical composition and volatile compounds in the artisanal ...

    African Journals Online (AJOL)

    Araceli

    2012-09-27

    Sep 27, 2012 ... The initial composition of the musts was variable in sugars and nitrogen between artisanal factories and seasons of fermentation. The values indicate that agave plantations vary from field to field crop, and also from season to season of each harvest due to sugar concentration in the agave plants which can ...

  6. Composition for the controlled release of active compounds

    NARCIS (Netherlands)

    Hovens, I.A.P.; Jongboom, R.O.J.; Stuut, P.I.

    1999-01-01

    The invention provides a composition for the controlled release of one or more biologically active substances encapsulated in a degradable biopolymer matrix, consisting of a thermoplastic and/or partly crystalline inulin. A plasticiser such as glycerol, and an emulsifier may be present. The active

  7. Climate Influences the Content and Chemical Composition of Foliar Tannins in Green and Senesced Tissues of Quercus rubra

    Directory of Open Access Journals (Sweden)

    Sara M. Top

    2017-05-01

    Full Text Available Environmental stresses not only influence production of plant metabolites but could also modify their resorption during leaf senescence. The production-resorption dynamics of polyphenolic tannins, a class of defense compound whose ecological role extends beyond tissue senescence, could amplify the influence of climate on ecosystem processes. We studied the quantity, chemical composition, and tissue-association of tannins in green and freshly-senesced leaves of Quercus rubra exposed to different temperature (Warming and No Warming and precipitation treatments (Dry, Ambient, Wet at the Boston-Area Climate Experiment (BACE in Massachusetts, USA. Climate influenced not only the quantity of tannins, but also their molecular composition and cell-wall associations. Irrespective of climatic treatments, tannin composition in Q. rubra was dominated by condensed tannins (CTs, proanthocyanidins. When exposed to Dry and Ambient*Warm conditions, Q. rubra produced higher quantities of tannins that were less polymerized. In contrast, under favorable conditions (Wet, tannins were produced in lower quantities, but the CTs were more polymerized. Further, even as the overall tissue tannin content declined, the content of hydrolysable tannins (HTs increased under Wet treatments. The molecular composition of tannins influenced their content in senesced litter. Compared to the green leaves, the content of HTs decreased in senesced leaves across treatments, whereas the CT content was similar between green and senesced leaves in Wet treatments that produced more polymerized tannins. The content of total tannins in senesced leaves was higher in Warming treatments under both dry and ambient precipitation treatments. Our results suggest that, though climate directly influenced the production of tannins in green tissues (and similar patterns were observed in the senesced tissue, the influence of climate on tannin content of senesced tissue was partly mediated by the effect

  8. Climate Influences the Content and Chemical Composition of Foliar Tannins in Green and Senesced Tissues of Quercus rubra.

    Science.gov (United States)

    Top, Sara M; Preston, Caroline M; Dukes, Jeffrey S; Tharayil, Nishanth

    2017-01-01

    Environmental stresses not only influence production of plant metabolites but could also modify their resorption during leaf senescence. The production-resorption dynamics of polyphenolic tannins, a class of defense compound whose ecological role extends beyond tissue senescence, could amplify the influence of climate on ecosystem processes. We studied the quantity, chemical composition, and tissue-association of tannins in green and freshly-senesced leaves of Quercus rubra exposed to different temperature ( Warming and No Warming ) and precipitation treatments ( Dry, Ambient, Wet ) at the Boston-Area Climate Experiment (BACE) in Massachusetts, USA. Climate influenced not only the quantity of tannins, but also their molecular composition and cell-wall associations. Irrespective of climatic treatments, tannin composition in Q. rubra was dominated by condensed tannins (CTs, proanthocyanidins). When exposed to Dry and Ambient * Warm conditions, Q. rubra produced higher quantities of tannins that were less polymerized. In contrast, under favorable conditions ( Wet ), tannins were produced in lower quantities, but the CTs were more polymerized. Further, even as the overall tissue tannin content declined, the content of hydrolysable tannins (HTs) increased under Wet treatments. The molecular composition of tannins influenced their content in senesced litter. Compared to the green leaves, the content of HTs decreased in senesced leaves across treatments, whereas the CT content was similar between green and senesced leaves in Wet treatments that produced more polymerized tannins. The content of total tannins in senesced leaves was higher in Warming treatments under both dry and ambient precipitation treatments. Our results suggest that, though climate directly influenced the production of tannins in green tissues (and similar patterns were observed in the senesced tissue), the influence of climate on tannin content of senesced tissue was partly mediated by the effect on

  9. A calibration approach to glandular tissue composition estimation in digital mammography

    International Nuclear Information System (INIS)

    Kaufhold, J.; Thomas, J.A.; Eberhard, J.W.; Galbo, C.E.; Trotter, D.E. Gonzalez

    2002-01-01

    The healthy breast is almost entirely composed of a mixture of fatty, epithelial, and stromal tissues which can be grouped into two distinctly attenuating tissue types: fatty and glandular. Further, the amount of glandular tissue is linked to breast cancer risk, so an objective quantitative analysis of glandular tissue can aid in risk estimation. Highnam and Brady have measured glandular tissue composition objectively. However, they argue that their work should only be used for 'relative' tissue measurements unless a careful calibration has been performed. In this work, we perform such a 'careful calibration' on a digital mammography system and use it to estimate breast tissue composition of patient breasts. We imaged 0%, 50%, and 100% glandular-equivalent phantoms of varying thicknesses for a number of clinically relevant x-ray techniques on a digital mammography system. From these images, we extracted mean signal and noise levels and computed calibration curves that can be used for quantitative tissue composition estimation. In this way, we calculate the percent glandular composition of a patient breast on a pixelwise basis. This tissue composition estimation method was applied to 23 digital mammograms. We estimated the quantitative impact of different error sources on the estimates of tissue composition. These error sources include compressed breast height estimation error, residual scattered radiation, quantum noise, and beam hardening. Errors in the compressed breast height estimate contribute the most error in tissue composition--on the order of ±7% for a 4 cm compressed breast height. The spatially varying scattered radiation will contribute quantitatively less error overall, but may be significant in regions near the skinline. It is calculated that for a 4 cm compressed breast height, a residual scatter signal error is mitigated by approximately sixfold in the composition estimate. The error in composition due to the quantum noise, which is the limiting

  10. Composition changes of hetero compounds in recycle solvents derived from the liquefaction of battle river coal

    Energy Technology Data Exchange (ETDEWEB)

    Yamamoto, Yoshitaka; Kamo, Toru; Inaba, Atsushi; Miki, Keiji; Sato, Yoshiki (National Research Inst. for Pollution and Resources, Tsukuba, (Japan))

    1989-08-20

    The composition changes in the recycle process including the hydrogenation process on hetero compounds in recycle solvent fraction derived from the liquefaction experiment with Battle River coal was examined. Oxygen compounds such as phenol and dibenzofuran increased and nitrigen compounds decreased in general. The reacting behaviours are different greatly, depending on respective nitrogen compounds, so that the study was carried out by using the model compound. Nitrogen compounds such as carbazole, etc. difficult to decompose increased in the recycle solvent. Indole decreased immediately with the recycling times but the OEA (o-ethylaniline) generated as intermediate denitrogenated product indicated comparatively low decreasing rate and the converting rate from OEA to perhydroacridine was slow. Acridine reacted to partially hydrogenated products like octahydroacridine or perhydroacridine rapidly but was not easily decomposed to final products, dicyclohexylmethane. Partial hydrogenation and dehydrogenation were repeated in the recycle solvent. 11 refs., 7 figs., 4 tabs.

  11. Phenolic compounds in cultures of tissues of tea plants and the effect of light on their synthesis

    Energy Technology Data Exchange (ETDEWEB)

    Koretskaya, T.F.; Zaprometov, M.N.

    1975-01-01

    Stem and leaf calluses of tea plants (Camellia sinensis) retain the capacity for synthesis of phenolic compounds. The content of phenolic compounds comprises 2 to 5 percent of dry weight, the main share (80 to 95 percent) belonging to catechins and leucoanthocyans, including their polymeric forms. The following compounds were detected in callus tissue: (--)-epicatechin, (+)-catechin, two leucoanthocyans, and several unidentified phenolic compounds that fluoresce in UV. (--)-Epicatechin is predominant. In contrast to tissues of an intact plant, the callus does not contain gallocatechins or free gallic acid under the given cultivation conditions. The content of phenolic compounds changes in proportion to callus growth, their greatest amount being formed during the phase of intensive growth. Light stimulates synthesis of phenolic compounds, including the most reduced group of flavonoids, viz., leucoanthocyans and catechins.

  12. Determinants of the Sensory Quality of Półgęsek in Relation to Volatile Compounds and Chemical Composition

    Directory of Open Access Journals (Sweden)

    Nowicka Katarzyna

    2017-12-01

    Full Text Available The objective of this study was to determine the sensory quality of a specific Polish traditional product made from cured and then smoked goose meat (półgęsek in relation to its volatile compounds and chemical composition. In general, the examined samples contained 66.2% water, 12.2% fat, 17.9% protein, 1.8% connective tissue, and 2.3% NaCl. Moreover, 47 volatile compounds were identified and quantified. The typical decomposition products derived from lipid oxidation, amino acid degradation, carbohydrate fermentation and microbial esterification were the main volatiles detected in all the samples. The volatiles generated by the smoking process and the ones originating from spices were also observed. The results of the sensory evaluation indicated that all the samples of the analyzed products were characterized by a high overall quality. Results of the Principal Component Analysis (PCA showed, however, that specific groups of products have their own unique sensory profile. Additionally, the sensory analysis confirmed the significant role of the chemical composition and volatile compounds in the development of the overall quality of półgęsek.

  13. Application of GC-MS for the detection of lipophilic compounds in diverse plant tissues

    Directory of Open Access Journals (Sweden)

    Hellmann Hanjo

    2009-04-01

    Full Text Available Abstract Background The concept of metabolite profiling has been around for decades and technical innovations are now enabling it to be carried out on a large scale with respect to the number of both metabolites measured and experiments carried out. However, studies are generally confined to polar compounds alone. Here we describe a simple method for lipophilic compounds analysis in various plant tissues. Results We choose the same preparative and instrumental platform for lipophilic profiling as that we routinely use for polar metabolites measurements. The method was validated in terms of linearity, carryover, reproducibility and recovery rates, as well as using various plant tissues. As a first case study we present metabolic profiling of Arabidopsis root and shoot tissue of wild type (C24 and mutant (rsr4-1 plants deficient on vitamin B6. We found significant alterations in lipid constituent contents, especially in the roots, which were characterised by dramatic increases in several fatty acids, thus providing further hint for the role of pyridoxine in oxidative stress and lipid peroxidation. The second example is the lipophilic profiling of red and green tomato fruit cuticles of wild type (Alisa Craig and the DFD (delayed fruit deterioration mutant, which we compared and contrasted with the more focused wax analysis of these plants reported before. Conclusion We can rapidly and reliably detect and quantify over 40 lipophilic metabolites including fatty acids, fatty alcohols, alkanes, sterols and tocopherols. The method presented here affords a simple and rapid, yet robust complement to previously validated methods of polar metabolite profiling by gas-chromatography mass-spectrometry.

  14. Biogenic, urban, and wildfire influences on the molecular composition of dissolved organic compounds in cloud water

    Directory of Open Access Journals (Sweden)

    R. D. Cook

    2017-12-01

    Full Text Available Organic aerosol formation and transformation occurs within aqueous aerosol and cloud droplets, yet little is known about the composition of high molecular weight organic compounds in cloud water. Cloud water samples collected at Whiteface Mountain, New York, during August–September 2014 were analyzed by ultra-high-resolution mass spectrometry to investigate the molecular composition of dissolved organic carbon, with a focus on sulfur- and nitrogen-containing compounds. Organic molecular composition was evaluated in the context of cloud water inorganic ion concentrations, pH, and total organic carbon concentrations to gain insights into the sources and aqueous-phase processes of the observed high molecular weight organic compounds. Cloud water acidity was positively correlated with the average oxygen : carbon ratio of the organic constituents, suggesting the possibility for aqueous acid-catalyzed (prior to cloud droplet activation or during/after cloud droplet evaporation and/or radical (within cloud droplets oxidation processes. Many tracer compounds recently identified in laboratory studies of bulk aqueous-phase reactions were identified in the cloud water. Organosulfate compounds, with both biogenic and anthropogenic volatile organic compound precursors, were detected for cloud water samples influenced by air masses that had traveled over forested and populated areas. Oxidation products of long-chain (C10−12 alkane precursors were detected during urban influence. Influence of Canadian wildfires resulted in increased numbers of identified sulfur-containing compounds and oligomeric species, including those formed through aqueous-phase reactions involving methylglyoxal. Light-absorbing aqueous-phase products of syringol and guaiacol oxidation were observed in the wildfire-influenced samples, and dinitroaromatic compounds were observed in all cloud water samples (wildfire, biogenic, and urban-influenced. Overall, the cloud water molecular

  15. Biogenic, urban, and wildfire influences on the molecular composition of dissolved organic compounds in cloud water

    Science.gov (United States)

    Cook, Ryan D.; Lin, Ying-Hsuan; Peng, Zhuoyu; Boone, Eric; Chu, Rosalie K.; Dukett, James E.; Gunsch, Matthew J.; Zhang, Wuliang; Tolic, Nikola; Laskin, Alexander; Pratt, Kerri A.

    2017-12-01

    Organic aerosol formation and transformation occurs within aqueous aerosol and cloud droplets, yet little is known about the composition of high molecular weight organic compounds in cloud water. Cloud water samples collected at Whiteface Mountain, New York, during August-September 2014 were analyzed by ultra-high-resolution mass spectrometry to investigate the molecular composition of dissolved organic carbon, with a focus on sulfur- and nitrogen-containing compounds. Organic molecular composition was evaluated in the context of cloud water inorganic ion concentrations, pH, and total organic carbon concentrations to gain insights into the sources and aqueous-phase processes of the observed high molecular weight organic compounds. Cloud water acidity was positively correlated with the average oxygen : carbon ratio of the organic constituents, suggesting the possibility for aqueous acid-catalyzed (prior to cloud droplet activation or during/after cloud droplet evaporation) and/or radical (within cloud droplets) oxidation processes. Many tracer compounds recently identified in laboratory studies of bulk aqueous-phase reactions were identified in the cloud water. Organosulfate compounds, with both biogenic and anthropogenic volatile organic compound precursors, were detected for cloud water samples influenced by air masses that had traveled over forested and populated areas. Oxidation products of long-chain (C10-12) alkane precursors were detected during urban influence. Influence of Canadian wildfires resulted in increased numbers of identified sulfur-containing compounds and oligomeric species, including those formed through aqueous-phase reactions involving methylglyoxal. Light-absorbing aqueous-phase products of syringol and guaiacol oxidation were observed in the wildfire-influenced samples, and dinitroaromatic compounds were observed in all cloud water samples (wildfire, biogenic, and urban-influenced). Overall, the cloud water molecular composition depended on

  16. The importance of the biomimetic composites components for recreating the optical properties and molecular composition of intact dental tissues.

    Science.gov (United States)

    Seredin, P. V.; Goloshchapov, D. L.; Gushchin, M. S.; Ippolitov, Y. A.; Prutskij, T.

    2017-11-01

    The objective of this paper was to investigate whether it is possible to obtain biomimetic materials recreating the luminescent properties and molecular composition of intact dental tissues. Biomimetic materials were produced and their properties compared with native dental tissues. In addition, the overall contribution of the organic and non-organic components in the photoluminescence band was investigated. The results showed that it is possible to develop biomimetic materials with similar molecular composition and optical properties to native dental tissues for the early identification of dental caries.

  17. Synthesis of carbon black/carbon nitride intercalation compound composite for efficient hydrogen production.

    Science.gov (United States)

    Wu, Zhaochun; Gao, Honglin; Yan, Shicheng; Zou, Zhigang

    2014-08-21

    The photoactivity of g-C3N4 is greatly limited by its high recombination rate of photogenerated carriers. Coupling g-C3N4 with other materials has been demonstrated to be an effective way to facilitate the separation and transport of charge carriers. Herein we report a composite of conductive carbon black and carbon nitride intercalation compound synthesized through facile one-step molten salt method. The as-prepared carbon black/carbon nitride intercalation compound composite was characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM), UV-vis absorption spectrum and photoluminescence spectroscopy (PL). The carbon black nanoparticles, homogeneously dispersed on the surface of carbon nitride intercalation compound, efficiently enhanced separation and transport of photogenerated carriers, thus improving the visible-light photocatalytic activity. The composite of 0.5 wt% carbon black and carbon nitride intercalation compound exhibited a H2 production rate of 68.9 μmol h(-1), which is about 3.2 times higher than hydrogen production on pristine carbon nitride intercalation compound.

  18. Compton scattering spectrum as a source of information of normal and neoplastic breast tissues' composition

    International Nuclear Information System (INIS)

    Antoniassi, M.; Conceição, A.L.C.; Poletti, M.E.

    2012-01-01

    In this work we measured X-ray scatter spectra from normal and neoplastic breast tissues using photon energy of 17.44 keV and a scattering angle of 90°, in order to study the shape (FWHM) of the Compton peaks. The obtained results for FWHM were discussed in terms of composition and histological characteristics of each tissue type. The statistical analysis shows that the distribution of FWHM of normal adipose breast tissue clearly differs from all other investigated tissues. Comparison between experimental values of FWHM and effective atomic number revealed a strong correlation between them, showing that the FWHM values can be used to provide information about elemental composition of the tissues. - Highlights: ► X-ray scatter spectra from normal and neoplastic breast tissues were measured. ► Shape (FWHM) of Compton peak was related with elemental composition and characteristics of each tissue type. ► A statistical hypothesis test showed clear differences between normal and neoplastic breast tissues. ► There is a strong correlation between experimental values of FWHM and effective atomic number. ► Shape (FWHM) of Compton peak can be used to provide information about elemental composition of the tissues.

  19. Alkali-Mediated Miscibility of Gelatin/Polycaprolactone for Electrospinning Homogeneous Composite Nanofibers for Tissue Scaffolding

    NARCIS (Netherlands)

    Zhou, Qihui; Zhang, Huilan; Zhou, Ya; Yu, Zhepao; Yuan, Huihua; Feng, Bei; van Rijn, Patrick; Zhang, Yanzhong

    2017-01-01

    Electrospun natural-synthetic composite nanofibers, which possess favorable biological and mechanical properties, have gained widespread attention in tissue engineering. However, the development of biomimetic nanofibers of hybrids remains a huge challenge due to phase separation of the polymer

  20. A biomimetic three-dimensional woven composite scaffold for functional tissue engineering of cartilage

    Science.gov (United States)

    Moutos, Franklin T.; Freed, Lisa E.; Guilak, Farshid

    2007-02-01

    Tissue engineering seeks to repair or regenerate tissues through combinations of implanted cells, biomaterial scaffolds and biologically active molecules. The rapid restoration of tissue biomechanical function remains an important challenge, emphasizing the need to replicate structural and mechanical properties using novel scaffold designs. Here we present a microscale 3D weaving technique to generate anisotropic 3D woven structures as the basis for novel composite scaffolds that are consolidated with a chondrocyte-hydrogel mixture into cartilage tissue constructs. Composite scaffolds show mechanical properties of the same order of magnitude as values for native articular cartilage, as measured by compressive, tensile and shear testing. Moreover, our findings showed that porous composite scaffolds could be engineered with initial properties that reproduce the anisotropy, viscoelasticity and tension-compression nonlinearity of native articular cartilage. Such scaffolds uniquely combine the potential for load-bearing immediately after implantation in vivo with biological support for cell-based tissue regeneration without requiring cultivation in vitro.

  1. Investigation of the “true” extraction recovery of analytes from multiple types of tissues and its impact on tissue bioanalysis using two model compounds

    Energy Technology Data Exchange (ETDEWEB)

    Yuan, Long, E-mail: long.yuan@bms.com [Bioanalytical Sciences, Research & Development, Bristol-Myers Squibb, Princeton, NJ 08543 (United States); Ma, Li [Biotransformation, Research & Development, Bristol-Myers Squibb, Princeton, NJ 08543 (United States); Dillon, Lisa [Discovery Toxicology, Research & Development, Bristol-Myers Squibb, Princeton, NJ 08543 (United States); Fancher, R. Marcus; Sun, Huadong [Metabolism and Pharmacokinetics, Research & Development, Bristol-Myers Squibb, Princeton, NJ 08543 (United States); Zhu, Mingshe [Biotransformation, Research & Development, Bristol-Myers Squibb, Princeton, NJ 08543 (United States); Lehman-McKeeman, Lois [Discovery Toxicology, Research & Development, Bristol-Myers Squibb, Princeton, NJ 08543 (United States); Aubry, Anne-Françoise [Bioanalytical Sciences, Research & Development, Bristol-Myers Squibb, Princeton, NJ 08543 (United States); Ji, Qin C., E-mail: qin.ji@bms.com [Bioanalytical Sciences, Research & Development, Bristol-Myers Squibb, Princeton, NJ 08543 (United States)

    2016-11-16

    LC-MS/MS has been widely applied to the quantitative analysis of tissue samples. However, one key remaining issue is that the extraction recovery of analyte from spiked tissue calibration standard and quality control samples (QCs) may not accurately represent the “true” recovery of analyte from incurred tissue samples. This may affect the accuracy of LC-MS/MS tissue bioanalysis. Here, we investigated whether the recovery determined using tissue QCs by LC-MS/MS can accurately represent the “true” recovery from incurred tissue samples using two model compounds: BMS-986104, a S1P{sub 1} receptor modulator drug candidate, and its phosphate metabolite, BMS-986104-P. We first developed a novel acid and surfactant assisted protein precipitation method for the extraction of BMS-986104 and BMS-986104-P from rat tissues, and determined their recoveries using tissue QCs by LC-MS/MS. We then used radioactive incurred samples from rats dosed with {sup 3}H-labeled BMS-986104 to determine the absolute total radioactivity recovery in six different tissues. The recoveries determined using tissue QCs and incurred samples matched with each other very well. The results demonstrated that, in this assay, tissue QCs accurately represented the incurred tissue samples to determine the “true” recovery, and LC-MS/MS assay was accurate for tissue bioanalysis. Another aspect we investigated is how the tissue QCs should be prepared to better represent the incurred tissue samples. We compared two different QC preparation methods (analyte spiked in tissue homogenates or in intact tissues) and demonstrated that the two methods had no significant difference when a good sample preparation was in place. The developed assay showed excellent accuracy and precision, and was successfully applied to the quantitative determination of BMS-986104 and BMS-986104-P in tissues in a rat toxicology study. - Highlights: • Investigated the “true” recovery in six different tissues using incurred

  2. Thermogel-Coated Poly(ε-Caprolactone) Composite Scaffold for Enhanced Cartilage Tissue Engineering

    OpenAIRE

    Shao-Jie Wang; Zheng-Zheng Zhang; Dong Jiang; Yan-Song Qi; Hai-Jun Wang; Ji-Ying Zhang; Jian-Xun Ding; Jia-Kuo Yu

    2016-01-01

    A three-dimensional (3D) composite scaffold was prepared for enhanced cartilage tissue engineering, which was composed of a poly(ε-caprolactone) (PCL) backbone network and a poly(lactide-co-glycolide)-block-poly(ethylene glycol)-block-poly(lactide-co-glycolide) (PLGA–PEG–PLGA) thermogel surface. The composite scaffold not only possessed adequate mechanical strength similar to native osteochondral tissue as a benefit of the PCL backbone, but also maintained cell-friendly microenvironment of th...

  3. Influence of drying and irradiation on the composition of volatile compounds of thyme (Thymus vulgaris L.)

    International Nuclear Information System (INIS)

    Venskutonis, R.; Poll, L.; Larsen, M.

    1996-01-01

    An investigation of the influence of air-drying, freeze-drying, γ- and β-irradiation and storage for up to 10 months on the composition of volatile compounds in thyme herb (Thymus vulgaris L.) is presented. Altogether, 70 constituents were identified (53 positively and 17 tentatively), including those considered most important for thyme flavour. Quantitative results did not reveal significant differences in the composition of irradiated and non-irradiated samples, and the reduction of the amount of some volatile compounds after drying was comparable for air-dried and freeze-dried herb. The largest changes in flavour composition were observed during storage, especially the reduction in the concentration of monoterpene hydrocarbons

  4. The composition of the primitive atmosphere and the synthesis of organic compounds on the early Earth

    Science.gov (United States)

    Bada, J. L.; Miller, S. L.

    1985-01-01

    The generally accepted theory for the origin of life on the Earth requires that a large variety of organic compounds be present to form the first living organisms and to provide the energy sources for primitive life either directly or through various fermentation reactions. This can provide a strong constraint on discussions of the formation of the Earth and on the composition of the primitive atmosphere. In order for substantial amounts of organic compounds to have been present on the prebiological Earth, certain conditions must have existed. There is a large body of literature on the prebiotic synthesis of organic compounds in various postulated atmospheres. In this mixture of abiotically synthesized organic compounds, the amino acids are of special interest since they are utilized by modern organisms to synthesize structural materials and a large array of catalytic peptides.

  5. Fatty acid composition of muscle and heart tissue of Nile perch ...

    African Journals Online (AJOL)

    The fatty acid composition in the heart tissue and muscle tissue of the Nile perch, Lates niloticus, and Nile tilapia, Oreochromis niloticus populations from Lakes Kioga and Victoria was determined by methanolysis and gas chromatography of the resulting fatty acid methyl esters. The analytical data were treated by ...

  6. Dual growth factor delivery from bilayered, biodegradable hydrogel composites for spatially-guided osteochondral tissue repair

    NARCIS (Netherlands)

    Lu, S.; Lam, J.; Trachtenberg, J.E.; Lee, E.J.; Seyednejad, H.; van den Beucken, J.J.; Tabata, Y.; Wong, M.E.; Jansen, J.A.; Mikos, A.G.; Kasper, F.K.

    2014-01-01

    The present work investigated the use of biodegradable hydrogel composite scaffolds, based on the macromer oligo(poly(ethylene glycol) fumarate) (OPF), to deliver growth factors for the repair of osteochondral tissue in a rabbit model. In particular, bilayered OPF composites were used to mimic the

  7. [Determination of volatile organic compounds in lung cancer cell lines and lung cancer tissue].

    Science.gov (United States)

    Hu, Yan-jie; Qiu, Yuan-hua; Chen, En-guo; Ying, Ke-jing; Yu, Jin; Wang, Ping

    2010-05-01

    To identify the volatile organic compounds (VOCs) in lung cancer tissue and lung cancer cell lines. The lung cancer tissue samples from 18 patients were cultured and 4 lung cell lines (A549, NCI-H446, SK-MES-1, BEAS-2B) were also included in the study. Air samples in the headspace of culture flasks were analyzed for VOCs with solid-phase micro-extraction and gas chromatography-mass spectroscopy technique (SPME-GC/MS). Two kinds of VOCs 2-pentadecanone and nonadecane were detected in lung cancer cell lines A549, NCI-H446 and SK-MES-1. The concentration of 2-pentadecanone were (1.382 + or -0.171) X 10(-5)mg/L, (1.681 + or - 0.190) X 10(-4)mg/L and (2.835 + or - 0.401) X 10(-6)mg/L, respectively; the concentrations of nonadecane were (8.382 + or - 0.606 ) X 10(-6)mg/L, (1.845 + or - 0.130) X 10(-5)mg/L and (6.220 + or - 0.362) X 10(-6)mg/L), respectively. The eicosane was detected in A549 and NCI-H446 with the concentration of (8.313 + or - 1.130) X 10(-6)mg/L and (1.020 + or - 0.141) X 10(-5)mg/L), respectively. All the 3 VOCs were not detected in cell line BEAS-2B. The concentrations of 12 VOCs including decane, 2- pentadecanone, nonadecane and eicosane were high in 18 lung cancer tissue samples; the concentrations of 2-pentadecanone were 5.421 X 10(-6)mg/L-3.621 X 10(-5)mg/L,those of nonadecane were 5.805 X 10(-6)mg/L-1.830 X 10(-5)mg/L, those of eicosane were 2.730 X 10(-6)mg/L-2.343 X 10(-5)mg/L. There were no differences of VOCs levels among patients with different cancer differentiation (P>0.05). The concentration of eicosane in the non-squamous carcinoma was higher than that in squamous carcinoma, the same results were confirmed in the lung cancer cell lines. This study has identified VOCs produced by lung cancer tissue, which may support to use breath test as a complementary noninvasive diagnostic method for lung cancer.

  8. REE compositions in fossil vertebrate dental tissues indicate biomineral preservation

    Science.gov (United States)

    Žigaite, Ž.; Kear, B.; Pérez-Huerta, A.; Jeffries, T.; Blom, H.

    2012-04-01

    Rare earth element (REE) abundances have been measured in a number of Palaeozoic and Mesozoic dental tissues using Laser Ablation Inductively Coupled Plasma Mass-spectrometry (LA-ICP-MS). Fossil vertebrates analysed comprise scales and tesserae of Silurian and Devonian acanthodians, chondrichthyans, galeaspids, mongolepids, thelodonts, as well as teeth of Cretaceous lungfish and marine reptiles. The evaluation of fossil preservation level has been made by semi-quantitative spot geochemistry analyses on fine polished teeth and scale thin sections, using Energy Dispersive X-ray Spectroscopy (EDS). Fossil teeth and scales with significant structure and colour alteration have shown elevated heavy element concentrations, and the silicification of bioapatite has been common in their tissues. Stable oxygen isotope measurements (δ18O) of bulk biomineral have been conducted in parallel, and showed comparatively lower heavy oxygen values in the same fossil tissues with stronger visible alteration. Significant difference in REE concentrations has been observed between the dentine and enamel of Cretaceous plesiosaurs, suggesting the enamel to be more geochemically resistant to diagenetic overprint.

  9. Composition and topology of activity cliff clusters formed by bioactive compounds.

    Science.gov (United States)

    Stumpfe, Dagmar; Dimova, Dilyana; Bajorath, Jürgen

    2014-02-24

    The assessment of activity cliffs has thus far mostly focused on compound pairs, although the majority of activity cliffs are not formed in isolation but in a coordinated manner involving multiple active compounds and cliffs. However, the composition of coordinated activity cliff configurations and their topologies are unknown. Therefore, we have identified all activity cliff configurations formed by currently available bioactive compounds and analyzed them in network representations where activity cliff configurations occur as clusters. The composition, topology, frequency of occurrence, and target distribution of activity cliff clusters have been determined. A limited number of large cliff clusters with unique topologies were identified that were centers of activity cliff formation. These clusters originated from a small number of target sets. However, most clusters were of small to moderate size. Three basic topologies were sufficient to describe recurrent activity cliff cluster motifs/topologies. For example, frequently occurring clusters with star topology determined the scale-free character of the global activity cliff network and represented a characteristic activity cliff configuration. Large clusters with complex topology were often found to contain different combinations of basic topologies. Our study provides a first view of activity cliff configurations formed by currently available bioactive compounds and of the recurrent topologies of activity cliff clusters. Activity cliff clusters of defined topology can be selected, and from compounds forming the clusters, SAR information can be obtained. The SAR information of activity cliff clusters sharing a/one specific activity and topology can be compared.

  10. Preparation and properties of dough-modeling compound/fly ash/reclaim powder composites

    Energy Technology Data Exchange (ETDEWEB)

    Wu, W.L. [Qiqihar University, Qiqihar (China)

    2007-12-15

    A novel composite was prepared with reclaim powder (RP) matrix, dough-modeling compound (DMC) reinforcement and fly ash (FA) filler in this article. The compatibility and crosslinking construction of the FA/RP composites were respectively, studied by the polarizing microscope and IR, the optimal formulation and experimental process were determined by measuring the mechanical properties such as shore A hardness, tensile strength, elongation at break, wear resistance and the thermal stability. The results showed that DMC/FA/RP composites exhibited extremely high mechanical and thermal properties when the mass ratio of the DMC/FA/RP composites was 45/25/100, and the cure condition is at 145 {sup o}C for 30 min under 9 MPa.

  11. Effect of composition of simulated intestinal media on the solubility of poorly soluble compounds investigated by design of experiments

    DEFF Research Database (Denmark)

    Madsen, Cecilie Maria; Feng, Kung-I; Leithead, Andrew

    2018-01-01

    The composition of the human intestinal fluids varies both intra- and inter-individually. This will influence the solubility of orally administered drug compounds, and hence, the absorption and efficacy of compounds displaying solubility limited absorption. The purpose of this study was to assess...... studies feasible compared to single SIF solubility studies. Applying this DoE approach will lead to a better understanding of the impact of intestinal fluid composition on the solubility of a given drug compound....

  12. Elemental composition of some essential cations in human ocular tissue

    Energy Technology Data Exchange (ETDEWEB)

    Panessa-Warren, B.J.; Kraner, H.W.; Warren, J.B.

    1983-01-01

    To obtain data on the baseline elemental content in normal adult sensory retina, RPE and iris, normal non-diabetic eyes were analyzed and these results were used for comparison to similarly prepared samples from diabetic donor eyes. To determine if the concentrations of the cations, Ca, Ba and Zn were altered by the age, alimentation and exposure to light of the donor, tissue from children (from 25 weeks gestation to 8-1/2 years old) was also analyzed by x-ray fluorescence spectroscopy, proton induced x-ray emission spectroscopy, and light and electron (scanning and transmission) microscopy.

  13. The importance of tissue specificity for RNA-seq: highlighting the errors of composite structure extractions.

    Science.gov (United States)

    Johnson, Brian R; Atallah, Joel; Plachetzki, David C

    2013-08-28

    A composite biological structure, such as an insect head or abdomen, contains many internal structures with distinct functions. Composite structures are often used in RNA-seq studies, though it is unclear how expression of the same gene in different tissues and structures within the same structure affects the measurement (or even utility) of the resulting patterns of gene expression. Here we determine how complex composite tissue structure affects measures of gene expression using RNA-seq. We focus on two structures in the honey bee (the sting gland and digestive tract) both contained within one larger structure, the whole abdomen. For each of the three structures, we used RNA-seq to identify differentially expressed genes between two developmental stages, nurse bees and foragers. Based on RNA-seq for each structure-specific extraction, we found that RNA-seq with composite structures leads to many false negatives (genes strongly differentially expressed in particular structures which are not found to be differentially expressed within the composite structure). We also found a significant number of genes with one pattern of differential expression in the tissue-specific extraction, and the opposite in the composite extraction, suggesting multiple signals from such genes within the composite structure. We found these patterns for different classes of genes including transcription factors. Many RNA-seq studies currently use composite extractions, and even whole insect extractions, when tissue and structure specific extractions are possible. This is due to the logistical difficultly of micro-dissection and unawareness of the potential errors associated with composite extractions. The present study suggests that RNA-seq studies of composite structures are prone to false negatives and difficult to interpret positive signals for genes with variable patterns of local expression. In general, our results suggest that RNA-seq on large composite structures should be avoided

  14. Chemical composition of components comprising bast tissue in flax.

    Science.gov (United States)

    Morrison, W H; Akin, D E

    2001-05-01

    Components from the bast region of flax (Linum usitatissium) were removed by hand from seed flax and fiber flax and analyzed by gas chromatography and mass spectrometry. Stems soaked in water were separated by hand into an outer layer, which consisted of epidermis with cuticle and parenchyma cells, and fiber bundles. Each of the two fractions were evaluated for chemical markers that could be used to predict the degree of retting and possibly fiber quality. The outer layer was subsequently treated with a mixed enzyme preparation to remove the carbohydrate portion, thus providing another fraction consisting primarily of cuticle. Four main constituent groups were investigated: dihydroxy fatty acids, long-chain fatty acids and alcohols, sterols, and aromatics. Long-chain fatty acids and alcohols located in the outer layer accounted for 80-92% of the total found in both fractions. Aromatics and sterols in the outer layer accounted for 29--72 and 27--67%, respectively, of the total and do not appear to be a reliable marker for the degree of retting. The best markers for retting were the dihydroxy fatty acids, of which 98--99% were accounted for in the outer layer. The main dihydroxy fatty acids were a mixture of 8,16- and 9,16-dihydroxyhexadecanoic acids and represented 87--89% of the total dihydroxy fatty acids measured. As a constituent of cuticle, this compound may serve as an excellent marker for indicating the degree of retting as well as a possible marker for fiber quality because this compound is almost always exclusively associated with the outer layer and not the fiber.

  15. Natural compounds involved in adipose tissue mass control in in vitro studies

    Directory of Open Access Journals (Sweden)

    Katarzyna Kowalska

    2011-08-01

    Full Text Available The World Health Organization (WHO has recognized obesity as an epidemic of the 21st century. Obesity is pathological fat accumulation in the body influenced by many factors: metabolic, endocrine, genetic, environmental, psychological and behavioral. The quality and quantity of food intake to a considerable degree determine excessive fat accumulation in the body. The strategy in obesity prevention includes, among other things, a proper diet. It is widely known that a diet rich in fruits and vegetables reduces body weight. Adipocytes are not only cells serving as storage depots for “energy”, but are also specialized cells influenced by various hormones, cytokines and nutrients, which have pleiotropic effects on the body. Knowledge of adipocyte biology is crucial for our understanding of the pathophysiological basis of obesity and metabolic diseases, such as type 2 diabetes. Furthermore, rational manipulation of adipose physiology is a promising avenue for therapy of these conditions. Adipose tissue mass can be reduced through elimination of adipocytes by apoptosis, inhibition of adipogenesis and increased lipolysis in adipocytes. Natural products have a potential to induce apoptosis, inhibit adipogenesis and stimulate lipolysis in adipocytes. Various dietary bioactive compounds target different stages of the adipocyte life cycle and may be useful as natural therapeutic agents in obesity prevention.

  16. COMPOSITE PEPTIDE COMPOUNDS FOR DIAGNOSIS AND TREATMENT OF DISEASES CAUSED BY PRION PROTEINS

    DEFF Research Database (Denmark)

    2004-01-01

    The present invention relates to diseases caused by prion proteins, Novel composite peptide compounds are disclosed which comprise two or more peptides or peptide fragments optionally linked to a backbone and the peptides or peptide fragments are spatially positioned relative to each other so...... that they together form a non-linear sequence which mimics the tertiary structure of one or more PrPSc-specific epitopes as evidenced by the test described herein. The use of such conjugates as immunogens for the production of antibodies that specifically bind to the pathogenic form of a prion protein is revealed....... Other uses of the composite peptide compounds are also disclosed, such as use in diagnostic assays, production of antibodies and uses as vaccine immunogens for the prophylactic protection and therapeutic treatment of subjects against transmissible prion disease....

  17. Effect of boron compounds on physical, mechanical, and fire properties of injection molded wood plastic composites

    Science.gov (United States)

    Nadir Ayrilmis; Turgay Akbulut; Turker Dundar; Robert H. White; Fatih Mengeloglu; Zeki Candan; Umit Buyuksari; Erkan Avci

    2011-01-01

    Physical, mechanical, and fire properties of the injection-molded wood flour/polypropylene composites (WPCs) incorporated with different levels of boron compounds, borax/boric acid (BX/BA) (0.5:0.5 wt %) and zinc borate (ZB) (4, 8, or 12 wt %) were investigated. The effect of the coupling agent loading (2, 4, or 6 wt %), maleic anhydride-grafted PP (MAPP), on the...

  18. Effect of Dietary Protein Levels on Composition of Odorous Compounds and Bacterial Ecology in Pig Manure

    Directory of Open Access Journals (Sweden)

    Sungback Cho

    2015-09-01

    Full Text Available This study was performed to investigate the effect of different levels of dietary crude protein (CP on composition of odorous compounds and bacterial communities in pig manure. A total of 48 male pigs (average initial body weight 45 kg fed diets containing three levels of dietary CP (20%, 17.5%, and 15% and their slurry samples were collected from the pits under the floor every week for one month. Changes in composition of odorous compounds and bacterial communities were analyzed by gas chromatography and 454 FLX titanium pyrosequencing systems, respectively. Levels of phenols, indoles, short chain fatty acid and branched chain fatty acid were lowest (p<0.05 in CP 15% group among three CP levels. Relative abundance of Bacteroidetes phylum and bacterial genera including Leuconostoc, Bacillus, Atopostipes, Peptonphilus, Ruminococcaceae_uc, Bacteroides, and Pseudomonas was lower (p<0.05 in CP 15% than in CP 20% group. There was a positive correlation (p<0.05 between odorous compounds and bacterial genera: phenol, indole, iso-butyric acid, and iso-valeric acid with Atopostipes, p-cresol and skatole with Bacteroides, acetic acid and butyric acid with AM982595_g of Porphyromonadaceae family, and propionic acid with Tissierella. Taken together, administration of 15% CP showed less production of odorous compounds than 20% CP group and this result might be associated with the changes in bacterial communities especially whose roles in protein metabolism.

  19. Organochlorine compounds in streambed sediment and in biological tissue from streams and their relations to land use, central Arizona

    Science.gov (United States)

    Gebler, Joseph B.

    2000-01-01

    Streambed-sediment samples from 13 sites and biological-tissue samples from 11 sites in the Gila River Basin in central Arizona were analyzed for 32 organochlorine compounds in streambed sediment and 28 compounds in biological tissue during 1996 as part of the U.S. Geological Survey's National Water-Quality Assessment program. The objectives of the study were to determine the occurrence and distribution of organochlorine compounds and their relation to land use. Sampling sites were categorized on the basis of major land uses in the basin or the source of water in the stream. Because land uses were mixed or had changed over time, some land-use categories were combined. Sites were categorized as forest/rangeland (6), forest/urban (1), urban (4), or agricultural/urban (2). Thirteen organochlorine compounds were detected in streambed-sediment samples, and 10 were detected in tissue samples. The number of compounds found in streambed-sediment samples from individual sites ranged from 0 to 10, and the range for individual tissue samples was 0 to 7. Comparison of the number of detections in streambed-sediment samples to the number of detections in tissue samples from particular sites where both were sampled yielded five instances where more compounds were detected in streambed sediment, six instances where more compounds were detected in tissue, and five instances where the number of detections in streambed sediment and tissue were equal. The frequency of detection of particular compounds for sites where both streambed sediment and tissue were sampled resulted in five compounds being detected more frequently in streambed sediment, five more frequently in tissue, and three compounds that were equally frequent in streambed sediment and in tissue. Few contaminants were detected in samples from the forest/rangeland sites; greater numbers of compounds were detected at the urban sites and at the forest/urban site. The greatest number of compounds and the highest concentrations

  20. Leg tissue composition and physico-chemical parameters of sheep meat fed annatto coproduct

    Directory of Open Access Journals (Sweden)

    Dorgival Morais de Lima Júnior

    2017-10-01

    Full Text Available Our objective was to evaluate leg tissue composition and physico-chemical quality parameters of sheep meat fed with increasing levels of annatto coproduct. 32 male uncastrated animals without a defined breed were randomized in four treatments (0, 100, 200 and 300 g kg-1 of annatto coproduct in the DM diet. After 78 days of confinement, the animals were slaughtered and body components were recorded. Reconstituted leg weight, total muscle weight, biceps weight and semitendinosus weight showed a negative linear behavior (P 0.05 were found for leg tissue composition (%, muscle:bone ratio, relative fat or leg muscle. Meat physico-chemical parameters (color, shear force, water retention capacity and cooking losses were not affected by the inclusion of the annatto coproduct in the diet. The annatto coproduct can be included in up to 300 g kg-1 of dietary dry matter without negative effects to the leg tissue composition (% and physical parameters of confined sheep meat.

  1. Influence of reproductive status on tissue composition and biomechanical properties of ovine vagina.

    Directory of Open Access Journals (Sweden)

    Daniela Ulrich

    Full Text Available OBJECTIVE: To undertake a comprehensive analysis of the biochemical tissue composition and passive biomechanical properties of ovine vagina and relate this to the histo-architecture at different reproductive stages as part of the establishment of a large preclinical animal model for evaluating regenerative medicine approaches for surgical treatment of pelvic organ prolapse. METHODS: Vaginal tissue was collected from virgin (n = 3, parous (n = 6 and pregnant sheep (n = 6; mean gestation; 132 d; term = 145 d. Tissue histology was analyzed using H+E and Masson's Trichrome staining. Biochemical analysis of the extracellular matrix proteins used a hydroxyproline assay to quantify total collagen, SDS PAGE to measure collagen III/I+III ratios, dimethylmethylene blue to quantify glycosaminoglycans and amino acid analysis to quantify elastin. Uniaxial tensiometry was used to determine the Young's modulus, maximum stress and strain, and permanent strain following cyclic loading. RESULTS: Vaginal tissue of virgin sheep had the lowest total collagen content and permanent strain. Parous tissue had the highest total collagen and lowest elastin content with concomitant high maximum stress. In contrast, pregnant sheep had the highest elastin and lowest collagen contents, and thickest smooth muscle layer, which was associated with low maximum stress and poor dimensional recovery following repetitive loading. CONCLUSION: Pregnant ovine vagina was the most extensible, but the weakest tissue, whereas parous and virgin tissues were strong and elastic. Pregnancy had the greatest impact on tissue composition and biomechanical properties, compatible with significant tissue remodeling as demonstrated in other species. Biochemical changes in tissue protein composition coincide with these altered biomechanical properties.

  2. Tissue biocompatibility of kevlar aramid fibers and polymethylmethacrylate, composites in rabbits.

    Science.gov (United States)

    Henderson, J D; Mullarky, R H; Ryan, D E

    1987-01-01

    Two groups of female NZW rabbits were implanted in the paravertebral muscles with aramid (du Pont Kevlar aramid 49) fibers and aramid-polymethylmethacrylate (PMMA) composites for 14 and 28 days. Rabbits were killed at these times periods, necropsies performed, sites scored for gross tissue response, and tissue specimens containing the implants removed for histopathological evaluation. A mild fibrous tissue reaction was observed around all implants containing aramid fiber similar to that observed around the silicone control implant. Some foreign body giant cells were also present adjacent to the fibers. An intense necrotic inflammatory reaction was present around the positive control material (PVC Y-78). The tissue response to implantation of aramid fiber and fiber-PMMA composites indicates that aramid is a biocompatible material.

  3. Retention of plutonium in mouse tissues as affected by antiviral compounds and their analogs

    International Nuclear Information System (INIS)

    Lindenbaum, A.; Rosenthal, M.W.; Guilmette, R.A.

    1975-01-01

    The chelating agent DTPA (diethylenetriaminepentaacetic acid) is an effective therapeutic substance for decorporation of extracellar monomeric plutonium in the mouse and dog, but is much less effective in removing intracellular polymeric plutonium (Pu-P). In the absence of effective therapy, this intracellular plutonium is long retained in the body, particularly in reticuloendothelial tissues like the liver. Our interest, therefore, turned to the development of adjunct substances capable of removing additional plutonium from the liver beyond that removable by DTPA alone. We showed that glucan, a yeast cell wall polysaccharide, is a useful adjunct to DTPA for removal of Pu-P from the mouse liver. Its toxicity, however, makes it a less than desirable drug for potential human use. Therefore, we initiated a search for more soluble (and presumably less hazardous) therapeutic agents similar to glucan, i.e., capable of adjunct action with DTPA. Of over 20 substances tested the most successful results were obtained with two antiviral, antitumor compounds, the pyran copolymers XA-124-177 and XA-146-85-2. These are condensation products of divinyl ether and maleic anhydride. Another analog, EMH-227, prepared by condensation of acrylic acid and itaconic acid, was similarly successful. Maximal removal of plutonium from mouse liver was obtained with a single intravenous (I.V.) injection of 10 to 90 mg/kg of pyran copolymer given 5 days after I.V. Pu-P administration. Although these doses increased splenic uptake of plutonium, a dose of 10 mg/kg produced a minimal increase in the splenic burden while producing maximal removal of hepatic plutonium

  4. Analysing breast tissue composition with MRI using currently available short, simple sequences

    International Nuclear Information System (INIS)

    Chau, A.C.M.; Hua, J.; Taylor, D.B.

    2016-01-01

    Aim: To determine the most robust commonly available magnetic resonance imaging (MRI) sequence to quantify breast tissue composition at 1.5 T. Materials and methods: Two-dimensional (2D) T1-weighted, Dixon fat, Dixon water and SPAIR images were obtained from five participants and a breast phantom using a 1.5 T Siemens Aera MRI system. Manual segmentation of the breasts was performed, and an in-house computer program was used to generate signal intensity histograms. Relative trough depth and relative peak separation were used to determine the robustness of the images for quantifying the two breast tissues. Total breast volumes and percentage breast densities calculated using the four sequences were compared. Results: Dixon fat histograms had consistently low relative trough depth and relative peak separation compared to those obtained using other sequences. There was no significant difference in total breast volumes and percentage breast densities of the participants or breast phantom using Dixon fat and 2D T1-weighted histograms. Dixon water and SPAIR histograms were not suitable for quantifying breast tissue composition. Conclusion: Dixon fat images are the most robust for the quantification of breast tissue composition using a signal intensity histogram. - Highlights: • Signal intensity histogram analysis can determine robustness of images for quantification of breast tissue composition. • Dixon fat images are the most robust. • The characteristics of the signal intensity histograms from Dixon water and SPAIR images make quantification unsuitable.

  5. The Lipid Composition of Subcutaneous Adipose Tissue of Brown Bears (Ursus arctos) in Croatia.

    Science.gov (United States)

    Vranković, Lana; Delaš, Ivančica; Reljić, Slaven; Huber, Đuro; Maltar-Strmečki, Nadica; Klobučar, Karla; Krivić, Gabriela; Stojević, Zvonko; Aladrović, Jasna

    The composition of adipose tissue in brown bears (Ursus arctos) is highly variable and depends on an individual's feeding habits. Fatty acid composition of subcutaneous adipose tissue (SAT) may provide insight into brown bear feeding habits, for which data are scarce. The aim of this study was to determine the lipid composition of SAT and variations in the composition of fatty substances with regard to gender and to assess SAT relative to season and body mass (BM) of brown bears in Croatia. Seventy-six tissue samples of brown bear SAT were analyzed in this study. We found that gender, season, and BM significantly affected the lipid composition of SAT. Both females and males had higher percentages of saturated fatty acids and monounsaturated fatty acids (MUFAs) in SAT in spring than in autumn, while the percentage of polyunsaturated fatty acids (PUFAs) was higher in autumn. The prevalence of MUFAs in SAT and the greater presence of PUFAs in autumn, together with the presence of odd-chain saturated fatty acids, indicate the importance of these fatty acids in brown bear physiology. We suggest that the lipid content of adipose tissue may provide valuable information on changes in brown bear condition in response to feeding habits and the effects of supplemental feeding.

  6. Development of keratin–chitosan–gelatin composite scaffold for soft tissue engineering

    Energy Technology Data Exchange (ETDEWEB)

    Kakkar, Prachi [Central Leather Research Institute (Council of Scientific and Industrial Research), Adyar, Chennai 600020 (India); Verma, Sudhanshu; Manjubala, I. [Biomedical Engineering Division, School of Bio Sciences and Technology, VIT University, Vellore 632014 (India); Madhan, B., E-mail: bmadhan76@yahoo.co.in [Central Leather Research Institute (Council of Scientific and Industrial Research), Adyar, Chennai 600020 (India)

    2014-12-01

    Keratin has gained much attention in the recent past as a biomaterial for wound healing owing to its biocompatibility, biodegradability, intrinsic biological activity and presence of cellular binding motifs. In this paper, a novel biomimetic scaffold containing keratin, chitosan and gelatin was prepared by freeze drying method. The prepared keratin composite scaffold had good structural integrity. Fourier Transform Infrared (FTIR) spectroscopy showed the retention of the native structure of individual biopolymers (keratin, chitosan, and gelatin) used in the scaffold. Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC) results revealed a high thermal denaturation temperature of the scaffold (200–250 °C). The keratin composite scaffold exhibited tensile strength (96 kPa), compression strength (8.5 kPa) and water uptake capacity (> 1700%) comparable to that of a collagen scaffold, which was used as control. The morphology of the keratin composite scaffold observed using a Scanning Electron Microscope (SEM) exhibited good porosity and interconnectivity of pores. MTT assay using NIH 3T3 fibroblast cells demonstrated that the cell viability of the keratin composite scaffold was good. These observations suggest that the keratin–chitosan–gelatin composite scaffold is a promising alternative biomaterial for tissue engineering applications. - Highlights: • Fabrication of novel Keratin-Chitosan-Gelatin composite scaffold • Keratin composite scaffold shows excellent water uptake capacity and porosity • Keratin composite scaffold shows good thermal and physical stability • Biocompatibility of the developed scaffold is comparable to collagen scaffolds • Developed scaffold is a promising material for soft tissue engineering applications.

  7. A new composite hydrogel combining the biological properties of collagen with the mechanical properties of a supramolecular scaffold for bone tissue engineering.

    Science.gov (United States)

    Maisani, Mathieu; Ziane, Sophia; Ehret, Camille; Levesque, Lucie; Siadous, Robin; Le Meins, Jean-François; Chevallier, Pascale; Barthélémy, Philippe; De Oliveira, Hugo; Amédée, Joëlle; Mantovani, Diego; Chassande, Olivier

    2018-03-01

    Tissue engineering is a promising alternative to autografts, allografts, or biomaterials to address the treatment of severe and large bone lesions. Classically, tissue engineering products associate a scaffold and cells and are implanted or injected into the lesion. These cells must be embedded in an appropriate biocompatible scaffold, which offers a favourable environment for their survival and differentiation. Here, we designed a composite hydrogel composed of collagen I, an extracellular matrix protein widely used in several therapeutic applications, which we associated with a physical hydrogel generated from a synthetic small amphiphilic molecule. This composite showed improved mechanical and biological characteristics as compared with gels obtained from each separate compound. Incorporation of the physical hydrogel prevented shrinkage of collagen and cell diffusion out of the gel and yielded a gel with a higher elastic modulus than those of gels obtained with each component alone. The composite hydrogel allowed cell adhesion and proliferation in vitro and long-term cell survival in vivo. Moreover, it promoted the differentiation of human adipose-derived stem cells in the absence of any osteogenic factors. In vivo, cells embedded in the composite gel and injected subcutaneously in immunodeficient mice produced lamellar osteoid tissue and differentiated into osteoblasts. This study points this new composite hydrogel as a promising scaffold for bone tissue engineering applications. Copyright © 2017 John Wiley & Sons, Ltd.

  8. Degradable Chitosan-Collagen Composites Seeded with Cells as Tissue Engineered Heart Valves.

    Science.gov (United States)

    Fu, Jian-Hua; Zhao, Man; Lin, Yan-Rong; Tian, Xu-Dong; Wang, Ya-Dong; Wang, Zhen-Xing; Wang, Le-Xin

    2017-01-01

    Degradable collagen-chitosan composite materials have been used to fabricate tissue engineered heart valves. The aims of this study were to demonstrate that the collagen-chitosan composite scaffolds are cytocompatible, and endothelial cells can be differentiated from bone marrow mesenchymal stem cells (BMSCs) when seeded onto the scaffolds. The adhesion and biological activities of the seeded cells were also investigated. Collagen-chitosan composite material was used as the cell matrix, and smooth muscle cells, fibroblasts and BMSCs were used as seed cells. After four weeks of in vitro culture, the smooth muscle cells, fibroblasts, and BMSCs were sequentially seeded into the collagen-chitosan composite material. After four weeks in culture, the cellular density and activity were assessed on segments of the tissue engineered heart valve scaffolds to determine the cell viability and proliferation in the collagen-chitosan composite material. The tissue engineered heart valves stained positively for both smooth muscle actin and endothelial cell factor VIII, suggesting that the seeded cells were in fact smooth muscle cells, fibroblasts, and endothelial cells. The 6-ketone prostaglandin content, as measured by radioimmunoassay, of the collagen-chitosan cell culture fluid was higher than that of the serum-free medium (P biological activity after being cultured in vitro and seeded into the collagen-chitosan composite material. Copyright © 2016 Australian and New Zealand Society of Cardiac and Thoracic Surgeons (ANZSCTS) and the Cardiac Society of Australia and New Zealand (CSANZ). Published by Elsevier B.V. All rights reserved.

  9. Comparison of three tissue composition measurement techniques using digital mammograms — A signal-to-noise study

    OpenAIRE

    Breitenstein, Darryl S.; Shaw, Chris C.

    1998-01-01

    Tissue composition measurement may provide a quantitatively and physically meaningful method to objectively determine the “mammographic density” linked to breast cancer risk. A single energy hybrid (SEH) technique is described for measuring the tissue composition on a pixel-by-pixel basis with a single digital mammogram. Theoretical models were derived and used to compute signal-to-noise ratios (SNRs) in tissue composition measurement using the SEH method. The results were compared with those...

  10. Chemical Composition and Characteristic Odor Compounds in Essential Oil from Alismatis Rhizoma (Tubers of Alisma orientale).

    Science.gov (United States)

    Miyazawa, Mitsuo; Yoshinaga, Seiji; Kashima, Yusei; Nakahashi, Hiroshi; Hara, Nobuyuki; Nakagawa, Hiroki; Usami, Atsushi

    2016-01-01

    Chemical composition and potent odorants that contribute to the characteristic odor of essential oil from Alismatis Rhizoma (tubers of Alisma orientale) were investigated by gas chromatography-mass spectrometry (GC-MS), GC-olfactometry (GC-O), aroma extract dilution analysis (AEDA) and relative flavor activity (RFA) methods. Fifty components, representing 94.5% of the total oil, were identified. In this study, we newly identified thirty-nine compounds in the oil from tubers of A. orientale. The major constituents of the essential oil were khusinol (36.2%), δ-elemene (12.4%), germacron (4.1%), alismol (3.8%), β-elemene (3.1%), and α-bisabolol (1.9%). Through sensory analysis, sixteen aroma-active compounds were detected and the key contributing aroma-active compounds were δ-elemene (woody, flavor dilution (FD)-factor = 4, RFA = 0.3) β-elemene (spicy, FD = 5, RFA = 0.7), spathulenol (green, FD = 5, RFA = 1.0), γ-eudesmol (woody, FD = 6, RFA = 1.5), and γ-cadinol (woody, FD = 5, RFA = 1.0). These compounds are thought to contribute to the odor from tubers of A. orientale. These results imply that the essential oil from the tubers of A. orientale deserve further investigations in the phytochemical and medicinal fields.

  11. Diet authentication in sheep from the composition of animal tissues and products

    Directory of Open Access Journals (Sweden)

    Sophie Prache

    2009-07-01

    Full Text Available There is currently an increased consumer demand for information on herbivore production factors, particularly animal diet. To meet these demands, producers and commercial entities develop specifications via quality certifications. There is therefore a need for analytical tools that may guarantee that the specification commitments have been fully met or to help with constructing them. The present paper reviews the current state of knowledge concerning diet authentication in sheep meat and milk, the different approaches that have been investigated, some leading examples concerning the discrimination of contrasting feeding situations, together with the persistence of some diet markers in the event of changes in animals' diet. The nature of the diet strongly influences the composition of the animal tissues and products, which is due to specific compounds that are directly transferred from the feed to the end product or that are transformed or produced by rumen micro-organisms or the animal's metabolism under the effect of specific diets. Some of these compounds can therefore be used as diet markers. Compounds such as carotenoids, phenolic compounds, fatty acids, volatile compounds and ratios of oxygen, hydrogen, carbon and nitrogen stable isotope are potential tracers in meat and milk or animal tissues of animal feeding diets. Moreover, differences in meat and milk composition induce differences in their optical properties, and therefore in their spectral features, which can also be used for diet authentication. These techniques have already allowed discrimination among products obtained in contrasting feeding conditions. Intermediate situations, for example in case of modification of the animal's diet, may be less easily recognized and may require a combination of tracing methods. In particular, the persistence of tracers when animals are stall-fed a concentrate-based diet after pasture and its implications for traceability are discussed. Finally

  12. The influence of composition and location on the toughness of human atherosclerotic femoral plaque tissue.

    Science.gov (United States)

    Cunnane, E M; Barrett, H E; Kavanagh, E G; Mongrain, R; Walsh, M T

    2016-02-01

    The toughness of femoral atherosclerotic tissue is of pivotal importance to understanding the mechanism of luminal expansion during cutting balloon angioplasty (CBA) in the peripheral vessels. Furthermore, the ability to relate this parameter to plaque composition, pathological inclusions and location within the femoral vessels would allow for the improvement of existing CBA technology and for the stratification of patient treatment based on the predicted fracture response of the plaque tissue to CBA. Such information may lead to a reduction in clinically observed complications, an improvement in trial results and an increased adoption of the CBA technique to reduce vessel trauma and further endovascular treatment uptake. This study characterises the toughness of atherosclerotic plaque extracted from the femoral arteries of ten patients using a lubricated guillotine cutting test to determine the critical energy release rate. This information is related to the location that the plaque section was removed from within the femoral vessels and the composition of the plaque tissue, determined using Fourier Transform InfraRed spectroscopy, to establish the influence of location and composition on the toughness of the plaque tissue. Scanning electron microscopy (SEM) is employed to examine the fracture surfaces of the sections to determine the contribution of tissue morphology to toughness. Toughness results exhibit large inter and intra patient and location variance with values ranging far above and below the toughness of healthy porcine arterial tissue (Range: 1330-3035 for location and 140-4560J/m(2) for patients). No significant difference in mean toughness is observed between patients or location. However, the composition parameter representing the calcified tissue content of the plaque correlates significantly with sample toughness (r=0.949, ptough sections. Regression analysis highlights the potential of employing the calcified tissue content of the plaque as a

  13. Mesenchymal Stem Cell Therapy for Nerve Regeneration and Immunomodulation after Composite Tissue Allotransplantation

    Science.gov (United States)

    2012-02-01

    10-1-0927 TITLE: Mesenchymal Stem Cell Therapy for Nerve Regeneration and Immunomodulation after Composite Tissue Allotransplantation...immunosuppression. Bone Marrow Derived Mesenchymal stem cells (BM-MSCs) are pluripotent cells, capable of differentiation along multiple mesenchymal lineages into...As part of implemented transition from University of Pittsburgh to Johns Hopkins University, we optimized our mesenchymal stem cell (MSC) isolation

  14. Fatty acid composition of adipose tissue triglycerides after weight loss and weight maintenance: the DIOGENES study.

    NARCIS (Netherlands)

    Kunesova, M.; Hlavaty, P.; Tvrzicka, E.; Stankova, B.; Kalouskova, P.; Viguerie, N.; Larsen, T.M.; van Baak, M.A.; Jebb, S.A.; Martinez, J.A.; Pfeiffer, A.F.; Kafatos, A.; Handjieva Darlenska, T.; Hill, M.; Langin, D.; Zak, A.; Astrup, A.; Saris, W.H.

    2013-01-01

    Fatty acid composition of adipose tissue changes with weight loss. Palmitoleic acid as a possible marker of endogenous lipogenesis or its functions as a lipokine are under debate. To assess the predictive role of adipose triglycerides fatty acids in weight maintenance in participants of the DIOGENES

  15. A Compound Composite Odontoma Associated with Unerupted Permanent Incisor: A Case Report

    Science.gov (United States)

    Das, Usha Mohan; Viswanath, Deepak; Azher, Umme

    2009-01-01

    Odontomas are the most common type of odontogenic tumors and are generally asymptomatic. Frequently they interfere with the eruption of the teeth. This is the case report of a compound composite odontoma in an 11 years old girl, which resulted in failure of eruption of the permanent maxillary right central incisor while the contralateral tooth had erupted. A calcified mass was seen in the radiograph and was provisionally diagnosed as odontoma following which the odontoma was enucleated. Routine follow-up was done for 1½ years and no recurrence was seen. PMID:25206112

  16. 3D printing of composite tissue with complex shape applied to ear regeneration

    International Nuclear Information System (INIS)

    Lee, Jung-Seob; Hong, Jung Min; Jung, Jin Woo; Shim, Jin-Hyung; Cho, Dong-Woo; Oh, Jeong-Hoon

    2014-01-01

    In the ear reconstruction field, tissue engineering enabling the regeneration of the ear's own tissue has been considered to be a promising technology. However, the ear is known to be difficult to regenerate using traditional methods due to its complex shape and composition. In this study, we used three-dimensional (3D) printing technology including a sacrificial layer process to regenerate both the auricular cartilage and fat tissue. The main part was printed with poly-caprolactone (PCL) and cell-laden hydrogel. At the same time, poly-ethylene-glycol (PEG) was also deposited as a sacrificial layer to support the main structure. After complete fabrication, PEG can be easily removed in aqueous solutions, and the procedure for removing PEG has no effect on the cell viability. For fabricating composite tissue, chondrocytes and adipocytes differentiated from adipose-derived stromal cells were encapsulated in hydrogel to dispense into the cartilage and fat regions, respectively, of ear-shaped structures. Finally, we fabricated the composite structure for feasibility testing, satisfying expectations for both the geometry and anatomy of the native ear. We also carried out in vitro assays for evaluating the chondrogenesis and adipogenesis of the cell-printed structure. As a result, the possibility of ear regeneration using 3D printing technology which allowed tissue formation from the separately printed chondrocytes and adipocytes was demonstrated. (paper)

  17. Effect of boron and phosphate compounds on physical, mechanical, and fire properties of wood-polypropylene composites

    Science.gov (United States)

    Nadir Ayrilmis; Turgay Akbulut; Turker Dundar; Robert H. White; Fatih Mengeloglu; Umit Buyuksari; Zeki Candan; Erkan Avci

    2012-01-01

    Physical, mechanical, and fire properties of the injection-molded wood flour/polypropylene composites incorporated with different contents of boron compounds; borax/boric acid and zinc borate, and phosphate compounds; mono and diammonium phosphates were investigated. The effect of the coupling agent content, maleic anhydride-grafted polypropylene, on the properties of...

  18. Dissolved Compounds Excreted by Copepods Reshape the Active Marine Bacterioplankton Community Composition

    Directory of Open Access Journals (Sweden)

    Valentina P. Valdés

    2017-11-01

    Full Text Available Copepods are important suppliers of bioreactive compounds for marine bacteria through fecal pellet production, sloppy feeding, and the excretion of dissolved compounds. However, the interaction between copepods and bacteria in the marine environment is poorly understood. We determined the nitrogen and phosphorus compounds excreted by copepods fed with two natural size-fractionated diets (<20- and 20–150-μm in the upwelling zone of central/southern Chile in late summer and spring. We then assessed the biogeochemical response of the bacterial community and its structure, in terms of total and active cells, to enrichment by copepod-excreted dissolved compounds. Results revealed that copepods actively excreted nitrogen and phosphorus compounds, mainly in the form of ammonium and dissolved organic phosphorus (DOP, reaching excretion rates of 2.6 and 0.05 μmol L−1h−1, respectively. In both periods, the maximum excretion rates were associated with the 20–150-μm size fraction, but particularly during spring, when a higher organic matter quality was observed in excretion products compared to late summer. There were higher excretion rates of dissolved free amino acids (DFAAs from copepods fed with the <20-μm size fraction, mainly histidine (HIS in late summer and glutamic acid (GLU in spring. A shift in the composition of the active bacterial community was observed between periods and treatments, which was associated with the response of the common seawater surface phyla Proteobacteria and Bacteroidetes. The specific bacterial activity (16S rRNA:rDNA suggested a different response to the two size-fractionated diets. In late summer, Betaproteobacteria and Bacteroidetes were stimulated by the treatment enriched with excretion products derived from the 20–150-μm and <20-μm size fractions, respectively. In spring, Alphaproteobacteria were active in the treatment enriched with the excretion products of copepods fed with the <20-μm size

  19. Reconstruction with vascularized composite tissue in patients with excessive injury following surgery and irradiation

    International Nuclear Information System (INIS)

    Serafin, D.; DeLand, M.; Lesesne, C.B.; Smith, P.J.; Noell, K.T.; Georgiade, N.

    1982-01-01

    The biological effects of a single high dose of radiation are examined. Both cellular injury and repair are reviewed during early, intermediate, and late phases. Anticipated composite tissue morbidity is detailed for therapeutic radiation doses administered to the head and neck, breast and thorax, and perineum. Patients who demonstrated excessive time-dose fractionation values were irradiated with lower x-ray energies. Those in whom there was an overlap of treatment fields presented a serious challenge to the reconstructive surgeon. Judicious selection of well-vascularized composite tissue outside the portals of irradiation, preferably with a long vascular pedicle, facilitated reconstruction. When possible, both donor and recipient vasculature should be outside the irradiated area to ensure uninterrupted blood flow to the transferred or transplanted tissue

  20. Fatty acid composition of adipose tissue triglycerides after weight loss and weight maintenance

    DEFF Research Database (Denmark)

    Kunešová, M; Hlavatý, P; Tvrzická, E

    2012-01-01

    Fatty acid composition of adipose tissue changes with weight loss. Palmitoleic acid as a possible marker of endogenous lipogenesis or its functions as a lipokine are under debate. Objective was to assess the predictive role of adipose triglycerides fatty acids in weight maintenance in participants....../HGI), and a control diet. Fatty acid composition in adipose tissue triglycerides was determined by gas chromatography in 195 subjects before the LCD (baseline), after LCD and weight maintenance. Weight change after the maintenance phase was positively correlated with baseline adipose palmitoleic (16:1n-7......), myristoleic (14:1n-5) and trans-palmitoleic acid (16:1n-7t). Negative correlation was found with baseline oleic acid (18:1n-9). Lower baseline monounsaturated fatty acids (14:1n-5, 16:1n-7 and trans 16:1n-7) in adipose tissue triglycerides predict better weight maintenance. Lower oleic acid predicts lower...

  1. Development and characterization of hydroxyapatite/β-TCP/chitosan composites for tissue engineering applications.

    Science.gov (United States)

    Shavandi, Amin; Bekhit, Alaa El-Din A; Ali, M Azam; Sun, Zhifa; Gould, Maree

    2015-11-01

    Calcium phosphate ceramics that mimic bone composition provide interesting possibilities for the advancement in bone tissue engineering. The present study reports on a chitosan composite reinforced by hydroxyapatite (HA) and β-tricalcium phosphate (β-TCP) obtained from waste mussel shells and cross-linked using tripolyphosphate (TPP). The ratios of the ceramic components in composites were 20/10/70, 30/20/50 and 40/30/30 (HA/β-TCP/CH, w/w %). Biodegradation rate, structural properties and in-vitro degradation of the bone-like composite scaffolds were investigated. The optimum amount of TPP required for composite was 2.5% and glycerol was used as plasticizer at an optimized concentration of 1%. Tripolyphosphate cross-linked chitosan composites were developed by freezing and lyophilisation. The Young's modulus of the scaffolds was increased from 4kPa to 17kPa and the porosity of composites dropped from 85 to 68% by increasing the HA/β-TCP ratio. After 28days in physiological solution, bone-like composite scaffolds with a higher ratio of HA/β-TCP (e.g. 40/30/30) showed about 2% lower biodegradation in comparison to scaffolds with a lower ratio of HA/β-TCP (i.e. 20/10/70). The obtained data suggest that the chitosan based bone-like composites could be potential candidates for biomedical applications. Copyright © 2015 Elsevier B.V. All rights reserved.

  2. Fusion analysis of first episode depression: Where brain shape deformations meet local composition of tissue

    Directory of Open Access Journals (Sweden)

    Mahdi Ramezani

    2015-01-01

    Full Text Available Computational neuroanatomical techniques that are used to evaluate the structural correlates of disorders in the brain typically measure regional differences in gray matter or white matter, or measure regional differences in the deformation fields required to warp individual datasets to a standard space. Our aim in this study was to combine measurements of regional tissue composition and of deformations in order to characterize a particular brain disorder (here, major depressive disorder. We use structural Magnetic Resonance Imaging (MRI data from young adults in a first episode of depression, and from an age- and sex-matched group of non-depressed individuals, and create population gray matter (GM and white matter (WM tissue average templates using DARTEL groupwise registration. We obtained GM and WM tissue maps in the template space, along with the deformation fields required to co-register the DARTEL template and the GM and WM maps in the population. These three features, reflecting tissue composition and shape of the brain, were used within a joint independent-components analysis (jICA to extract spatially independent joint sources and their corresponding modulation profiles. Coefficients of the modulation profiles were used to capture differences between depressed and non-depressed groups. The combination of hippocampal shape deformations and local composition of tissue (but neither shape nor local composition of tissue alone was shown to discriminate reliably between individuals in a first episode of depression and healthy controls, suggesting that brain structural differences between depressed and non-depressed individuals do not simply reflect chronicity of the disorder but are there from the very outset.

  3. A new type of magnetocaloric composite based on conductive polymer and magnetocaloric compound

    Energy Technology Data Exchange (ETDEWEB)

    Imamura, W., E-mail: williamimamura@yahoo.com.br [State University of Maringá (UEM)/Department of Mechanical Engineering (DEM-PEM), 87020-900 Maringá, PR (Brazil); Coelho, A.A. [State University of Campinas (Unicamp)/Department of Applied Physics (DFA-IFGW), 13083-859 Campinas, SP (Brazil); Kupfer, V.L. [State University of Maringá (UEM)/Department of Chemistry (DQI-LMSen), 87020-900 Maringá, PR (Brazil); Carvalho, A.M.G. [Brazilian Synchrotron Light Laboratory (LNLS)/Brazilian Center for Research in Energy and Materials (CNPEM), C. P. 6192, 13083-970 Campinas, SP (Brazil); Zago, J.G. [State University of Maringá (UEM)/Department of Mechanical Engineering (DEM-PEM), 87020-900 Maringá, PR (Brazil); Rinaldi, A.W. [State University of Maringá (UEM)/Department of Chemistry (DQI-LMSen), 87020-900 Maringá, PR (Brazil); Favaro, S.L.; Alves, C.S. [State University of Maringá (UEM)/Department of Mechanical Engineering (DEM-PEM), 87020-900 Maringá, PR (Brazil)

    2017-03-01

    We introduce a processing route of the first magnetocaloric composite with conductive polymer – wherein the magnetocaloric reinforcement is a compound Gd{sub 5.09}Ge{sub 2.03}Si{sub 1.88} and the ductile matrix is a conductive polymer polyaniline doped by camphorsulfonic acid (PAni-CSA). This new type of composite combines mechanical, electrical and magnetocaloric properties that can be applied in thermomagnetic machines. - Highlights: • We developed a new type of magnetocaloric composite: PAni-CSA/Gd5.09Ge2.03Si1.88. • We presented a processing route which use a conductive polymer instead of epoxy resins or thermoplastic polymers. • We varied the concentration of PAni-CSA (numerical type) and sintering (categorical type). • We analyzed the matrix (PAni-CSA), the magnetocaloric reinforcement (Gd5.09Ge2.03Si1.88) and the composites. • We presented and discussed mechanical, electrical and magnetocaloric properties.

  4. Distribution of olive oil phenolic compounds in rat tissues after administration of a phenolic extract from olive cake.

    Science.gov (United States)

    Serra, Aida; Rubió, Laura; Borràs, Xenia; Macià, Alba; Romero, Maria-Paz; Motilva, Maria-José

    2012-03-01

    The distribution and accumulation of olive oil phenolic compounds in the body are topics lacked of information. The aim of this study was to evaluate the bioavailability, metabolism and distribution of phenolic compounds from olive cake. The metabolism and distribution of phenolic compounds were examined by UPLC-MS/MS after an acute intake of a phenolic extract from olive cake, analyzing plasma and tissues (heart, brain, liver, kidney, spleen, testicle and thymus) 1, 2 and 4 h after ingestion using Wistar rats as the in vivo model. The results showed a wide distribution of phenolic compounds and their metabolites in the tissues, with a main detoxification route through the kidneys. Highlighting the quantification of the free forms of some phenolic compounds, such as oleuropein derivative in plasma (Cmax 4 h: 24 nmol/L) and brain (Cmax 2 h: 2.8 nmol/g), luteolin in kidney (Cmax 1 h: 0.04 nmol/g), testicle (Cmax 2 h: 0.07 nmol/g) and heart (Cmax 1 h: 0.47 nmol/g); and hydroxytyrosol in plasma (Cmax 2 h: 5.2 nmol/L), kidney (Cmax 4 h: 3.8 nmol/g) and testicle (Cmax 2 h: 2.7 nmol/g). After a single ingestion of olive oil phenolic compounds, these were absorbed, metabolized and distributed through the blood stream to practically all parts of the body, even across the blood-brain barrier. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Body composition and fatty tissue distribution in women with various menstrual status

    Science.gov (United States)

    Dmitruk, Agnieszka; Czeczelewski, Jan; Czeczelewska, Ewa; Golach, Jolanta; Parnicka, Urszula

    2018-01-01

    Menopause, also referred to as climacterium, is a period of multiple changes in the structure and functions of a woman organism. Determination of differences in body composition and fatty tissue distribution in women from groups discriminated based on their menstrual status. The survey covered 312 women aged 38-75 years. Menstrual status of the surveyed women was established according to WHO guidelines based on answers to a questionnaire, and three groups were discriminated: women in the premenopausal period (group 1), in the perimenopausal period (group 2), and in the postmenopausal period (group 3). The following anthropomological measurements were taken: body height, body mass, waist and hip circumference, and thickness of 6 skinfolds. Their results enabled evaluating the somatic built of women in the separated groups. Fatty tissue distribution was determined based on TER distribution index calculated as a ratio of the sum of trunk skinfolds (TSS) to the sum of extremity skinfolds (ESS). Body composition of the women, including percentage of body fat, lean body mass, soft tissue mass, and total body water, was assessed using an IOI 353 analyzer by JAWON MEDICAL. In addition, percentages of women with underweight, normal content of fatty tissue, and these with overweight and obesity were calculated. The WHR index was computed in the case of obese women. The highest values of body mass, hip circumference and most of the skinfolds were determined in the perimenopausal group, whereas the postmenopausal women were characterized by the highest percentage of body fat (PBF) and by the lowest contents of lean tissue, soft tissue, and total water content in the body. The highest percentage of obese women was found in the postmenopausal group, including 40% of them having visceral type obesity. The occurrence of the menopause contributed to changes in fatty tissue distribution, causing its shift from extremities toward the trunk. The study showed differences in the somatic

  6. Perfusion decellularization of a human limb: A novel platform for composite tissue engineering and reconstructive surgery.

    Directory of Open Access Journals (Sweden)

    Mattia Francesco Maria Gerli

    Full Text Available Muscle and fasciocutaneous flaps taken from autologous donor sites are currently the most utilized approach for trauma repair, accounting annually for 4.5 million procedures in the US alone. However, the donor tissue size is limited and the complications related to these surgical techniques lead to morbidities, often involving the donor sites. Alternatively, recent reports indicated that extracellular matrix (ECM scaffolds boost the regenerative potential of the injured site, as shown in a small cohort of volumetric muscle loss patients. Perfusion decellularization is a bioengineering technology that allows the generation of clinical-scale ECM scaffolds with preserved complex architecture and with an intact vascular template, from a variety of donor organs and tissues. We recently reported that this technology is amenable to generate full composite tissue scaffolds from rat and non-human primate limbs. Translating this platform to human extremities could substantially benefit soft tissue and volumetric muscle loss patients providing tissue- and species-specific grafts. In this proof-of-concept study, we show the successful generation a large-scale, acellular composite tissue scaffold from a full cadaveric human upper extremity. This construct retained its morphological architecture and perfusable vascular conduits. Histological and biochemical validation confirmed the successful removal of nuclear and cellular components, and highlighted the preservation of the native extracellular matrix components. Our results indicate that perfusion decellularization can be applied to produce human composite tissue acellular scaffolds. With its preserved structure and vascular template, these biocompatible constructs, could have significant advantages over the currently implanted matrices by means of nutrient distribution, size-scalability and immunological response.

  7. Thermogel-Coated Poly(ε-Caprolactone Composite Scaffold for Enhanced Cartilage Tissue Engineering

    Directory of Open Access Journals (Sweden)

    Shao-Jie Wang

    2016-05-01

    Full Text Available A three-dimensional (3D composite scaffold was prepared for enhanced cartilage tissue engineering, which was composed of a poly(ε-caprolactone (PCL backbone network and a poly(lactide-co-glycolide-block-poly(ethylene glycol-block-poly(lactide-co-glycolide (PLGA–PEG–PLGA thermogel surface. The composite scaffold not only possessed adequate mechanical strength similar to native osteochondral tissue as a benefit of the PCL backbone, but also maintained cell-friendly microenvironment of the hydrogel. The PCL network with homogeneously-controlled pore size and total pore interconnectivity was fabricated by fused deposition modeling (FDM, and was impregnated into the PLGA–PEG–PLGA solution at low temperature (e.g., 4 °C. The PCL/Gel composite scaffold was obtained after gelation induced by incubation at body temperature (i.e., 37 °C. The composite scaffold showed a greater number of cell retention and proliferation in comparison to the PCL platform. In addition, the composite scaffold promoted the encapsulated mesenchymal stromal cells (MSCs to differentiate chondrogenically with a greater amount of cartilage-specific matrix production compared to the PCL scaffold or thermogel. Therefore, the 3D PCL/Gel composite scaffold may exhibit great potential for in vivo cartilage regeneration.

  8. Characterisation of commercial aromatised vinegars: phenolic compounds, volatile composition and antioxidant activity.

    Science.gov (United States)

    Cejudo-Bastante, María J; Durán-Guerrero, Enrique; Natera-Marín, Ramón; Castro-Mejías, Remedios; García-Barroso, Carmelo

    2013-04-01

    Nineteen commercially available aromatised vinegars, which were representative of this type of product, were tested to ascertain their phenolic and volatile composition and antioxidant activity. The aromatised vinegars came from different raw materials such as fruits, spices, herbs and vegetables. The antioxidant activity was determined by means of photochemiluminescence, phenolic profile by using ultra performance liquid chromatography with ultraviolet detection, and the volatile composition was determined by using stir bar sorptive extraction-gas chromatography-mass spectrometry. Nine polyphenolic compounds and 141 volatile compounds were identified. Vinegar aromatised with black truffle and rosemary obtained the highest values of antioxidant activity, followed by those aromatised with lemon, tarragon, aromatic herbs and vegetables. Antioxidant activity was highly correlated with the presence of trans-p-coutaric acid, trans-caftaric acid, 5-hydroxy-methylfurfural and furfural. Moreover, (Z)-3-hexen-1-ol was exclusive to the vinegar aromatised with tarragon, while p-menth-1,8-ol, dimethyl styrene, 4-methyl acetophenone and nootkatone were only found in vinegar aromatised with lemon. On the basis of the results from the cluster analysis of cases, it can be concluded that the grouping responds more to the trademark of each vinegar than to the raw material. © 2012 Society of Chemical Industry.

  9. Direct spectrometry: a new alternative for measuring the fluorescence of composite resins and dental tissues.

    Science.gov (United States)

    da Silva, Tm; de Oliveira, Hpm; Severino, D; Balducci, I; Huhtala, Mfrl; Gonçalves, Sep

    2014-01-01

    The aim of this study was to evaluate the fluorescence intensity of different composite resins and compare those values with the fluorescence intensity of dental tissues. Different composite resins were used to make 10 discs (2 mm in depth and 4 mm in diameter) of each brand, divided into groups: 1) Z (Filtek Z350, 3M ESPE), 2) ES (Esthet-X, Dentsply), 3) A (Amelogen Plus, Ultradent), 4) DVS (Durafill-VS, Heraeus Kulzer) with 2 mm composite resin for enamel (A2), 5) OES ([Esthet-X] opaque-OA [1 mm] + enamel-A2 [1 mm]); 6) ODVSI ([Charisma-Opal/Durafill-VSI], opaque-OM (1 mm) + translucent [1mm]), and 7) DVSI ([Durafill- VSI] translucent [2 mm]). Dental tissue specimens were obtained from human anterior teeth cut in a mesiodistal direction to obtain enamel, dentin, and enamel/dentin samples (2 mm). The fluorescence intensity of specimens was directly measured using an optic fiber associated with a spectrometer (Ocean Optics USB 4000) and recorded in graphic form (Origin 8.0 program). Data were submitted to statistical analysis using Dunnet, Tukey, and Kruskall-Wallis tests. Light absorption of the composite resins was obtained in a spectral range from 250 to 450 nm, and that of dental tissues was between 250 and 300 nm. All composite resins were excited at 398 nm and exhibited maximum emissions of around 485 nm. Fluorescence intensity values for all of the resins showed statistically significant differences (measured in arbitrary units [AUs]), with the exception of groups Z and DVS. Group DVSI had the highest fluorescence intensity values (13539 AU), followed by ODVS (10440 AU), DVS (10146 AU), ES (3946 AU), OES (3841 AU), A (3540 AU), and Z (1146 AU). The fluorescence intensity values for the composite resins differed statistically from those of dental tissues (E=1380 AU; D=6262 AU; E/D=3251 AU). The opacity interfered with fluorescence intensity, and group Z demonstrated fluorescence intensity values closest to that of tooth enamel. It is concluded that the

  10. Determination of phenolic compounds in air by using cyclodextrin-silica hybrid microporous composite samplers.

    Science.gov (United States)

    Mauri-Aucejo, Adela R; Ponce-Català, Patricia; Belenguer-Sapiña, Carolina; Amorós, Pedro

    2015-03-01

    An analytical method for the determination of phenolic compounds in air samples based on the use of cyclodextrin-silica hybrid microporous composite samplers is proposed. The method allows the determination of phenol, guaiacol, cresol isomers, eugenol, 4-ethylphenol and 4-ethylguaiacol in workplaces according to the Norm UNE-EN 1076:2009 for active sampling. Therefore, the proposed method offers an alternative for the assessment of the occupational exposure to phenol and cresol isomers. The detection limits of the proposed method are lower than those for the NIOSH Method 2546. Storage time of samples almost reaches 44 days. Recovery values for phenol, guaiacol, o-cresol, m-cresol, p-cresol, 4-ethylguaiacol, eugenol and 4-ethylphenol are 109%, 99%, 102%, 94%, 94%, 91%, 95% and 102%, respectively with a coefficient of variation below 6%. The method has been applied to the assessment of exposure in different areas of a farm and regarding the quantification of these compounds in the vapors generated by burning incense sticks and an essential oil marketed as air fresheners. The acquired results are comparable with those provided from a reference method for a 95% of confidence level. The possible use of these samplers for the sampling of other toxic compounds such as phthalates is evaluated by qualitative analysis of extracts from incense sticks and essential oil samples. Copyright © 2014 Elsevier B.V. All rights reserved.

  11. Composition and health effects of phenolic compounds in hawthorn (Crataegus spp.) of different origins.

    Science.gov (United States)

    Yang, Baoru; Liu, Pengzhan

    2012-06-01

    Epicatechin, aglycons and glycosides of B-type oligomeric procyanidins and flavonols, phenolic acids and C-glycosyl flavones are the major groups of phenolic compounds in hawthorn (Crataegus spp). The total content of phenolic compounds is higher in the leaves and flowers than in the fruits. Procyanidins dominate in the fruits, whereas flavonol glycosides and C-glycosyl flavones are most abundant in the leaves. Genotype and developmental/ripening stage have strong impacts. Procyanidin glycosides and C-glycosyl flavones may be chemotaxonomic markers differentiating species and varieties of hawthorn. Future research shall improve the separation, identification and quantification of procyanidins with degree of polymerisation (DP) ≥ 6, procyanidin glycosides, C-glycosyl flavones and some flavonol glycosides. In vitro and animal studies have shown cardioprotective, hypolipidaemic, hypotensive, antioxidant, radical-scavenging and anti-inflammatory potentials of hawthorn extracts, suggesting different phenolic compounds as the major bioactive components. However, the varying and insufficiently defined composition of the extracts investigated, as a result of different raw materials and extraction methods, makes comparison of the studies very difficult. Clinical evidence indicates that some hawthorn extracts may increase the exercise tolerance of patients with congestive heart failure. More clinical studies are needed to establish the effects of hawthorn, especially in healthy humans. Copyright © 2012 Society of Chemical Industry.

  12. Development of metallic system multi-composite materials for compound environment and corrosion monitoring technology

    International Nuclear Information System (INIS)

    Kiuchi, Kiyoshi

    1996-01-01

    For the structural materials used for the pressure boundary of nuclear power plants and others, the long term durability over several decades under the compound environment, in which the action of radiation and the corrosion and erosion in the environment of use are superposed, is demanded. To its controlling factors, the secular change of materials due to irradiation ageing and the chemical and physical properties of extreme compound environment are related complicatedly. In the first period of this research, the development of the corrosion-resistant alloys with the most excellent adaptability to environments was carried out by the combination of new alloy design and alloy manufacturing technology. In the second period, in order to heighten the adaptability as the pressure boundary materials between different compound environments, the creation of metallic system multi-composite materials has been advanced. Also corrosion monitoring technique is being developed. The stainless steel for water-cooled reactors, the wear and corrosion-resistant superalloy for reactor core, the corrosion-resistant alloy and the metallic refractory material for reprocessing nitric acid reaction vessels are reported. (K.I.)

  13. Characteristics of Bone Tissue and Composite Materials on the Basis of Natural Hydroxyapatite and Endodontic Cement for Replacement of the Tissue

    Science.gov (United States)

    Filipenkov, V. V.; Rupeks, L. E.; Vitins, V. M.; Knets, I. V.; Kasyanov, V. A.

    2017-07-01

    New biocomposites and the cattle bone tissue were investigated. The composites were made from an endodontic cement (EC) and natural hydroxyapatite (NHAp.) The results of experiments performed by the method of infrared spectroscopy showed that protein was removed from the heat-treated specimens of bone tissue practically completely. The structure of bone tissue before and after deproteinization and the structure of the composite materials based on NHAp and EC (with different percentage) were investigated by the method of optical microscopy. The characteristics of mechanical properties (the initial elastic modulus, breaking tensile and compressive stresses, and breaking strain) and the density and porosity of these materials were determined. The new composite materials were implanted in the live tissue of rat. Biocompatibility between the live tissue and the new biocomposites was estimated.

  14. Environmentally benign graphite intercalation compound composition for exfoliated graphite, flexible graphite, and nano-scaled graphene platelets

    Energy Technology Data Exchange (ETDEWEB)

    Zhamu, Aruna; Jang, Bor Z.

    2014-06-17

    A carboxylic-intercalated graphite compound composition for the production of exfoliated graphite, flexible graphite, or nano-scaled graphene platelets. The composition comprises a layered graphite with interlayer spaces or interstices and a carboxylic acid residing in at least one of the interstices, wherein the composition is prepared by a chemical oxidation reaction which uses a combination of a carboxylic acid and hydrogen peroxide as an intercalate source. Alternatively, the composition may be prepared by an electrochemical reaction, which uses a carboxylic acid as both an electrolyte and an intercalate source. Exfoliation of the invented composition does not release undesirable chemical contaminants into air or drainage.

  15. Effect of composition of simulated intestinal media on the solubility of poorly soluble compounds investigated by design of experiments.

    Science.gov (United States)

    Madsen, Cecilie Maria; Feng, Kung-I; Leithead, Andrew; Canfield, Nicole; Jørgensen, Søren Astrup; Müllertz, Anette; Rades, Thomas

    2018-01-01

    The composition of the human intestinal fluids varies both intra- and inter-individually. This will influence the solubility of orally administered drug compounds, and hence, the absorption and efficacy of compounds displaying solubility limited absorption. The purpose of this study was to assess the influence of simulated intestinal fluid (SIF) composition on the solubility of poorly soluble compounds. Using a Design of Experiments (DoE) approach, a set of 24 SIF was defined within the known compositions of human fasted state intestinal fluid. The SIF were composed of phospholipid, bile salt, and different pH, buffer capacities and osmolarities. On a small scale semi-robotic system, the solubility of 6 compounds (aprepitant, carvedilol, felodipine, fenofibrate, probucol, and zafirlukast) was determined in the 24 SIF. Compound specific models, describing key factors influencing the solubility of each compound, were identified. Although all models were different, the level of phospholipid and bile salt, the pH, and the interactions between these, had the biggest influences on solubility overall. Thus, a reduction of the DoE from five to three factors was possible (11-13 media), making DoE solubility studies feasible compared to single SIF solubility studies. Applying this DoE approach will lead to a better understanding of the impact of intestinal fluid composition on the solubility of a given drug compound. Copyright © 2017 Elsevier B.V. All rights reserved.

  16. A Balanced Tissue Composition Reveals New Metabolic and Gene Expression Markers in Prostate Cancer.

    Directory of Open Access Journals (Sweden)

    May-Britt Tessem

    Full Text Available Molecular analysis of patient tissue samples is essential to characterize the in vivo variability in human cancers which are not accessible in cell-lines or animal models. This applies particularly to studies of tumor metabolism. The challenge is, however, the complex mixture of various tissue types within each sample, such as benign epithelium, stroma and cancer tissue, which can introduce systematic biases when cancers are compared to normal samples. In this study we apply a simple strategy to remove such biases using sample selections where the average content of stroma tissue is balanced between the sample groups. The strategy is applied to a prostate cancer patient cohort where data from MR spectroscopy and gene expression have been collected from and integrated on the exact same tissue samples. We reveal in vivo changes in cancer-relevant metabolic pathways which are otherwise hidden in the data due to tissue confounding. In particular, lowered levels of putrescine are connected to increased expression of SRM, reduced levels of citrate are attributed to upregulation of genes promoting fatty acid synthesis, and increased succinate levels coincide with reduced expression of SUCLA2 and SDHD. In addition, the strategy also highlights important metabolic differences between the stroma, epithelium and prostate cancer. These results show that important in vivo metabolic features of cancer can be revealed from patient data only if the heterogeneous tissue composition is properly accounted for in the analysis.

  17. A Balanced Tissue Composition Reveals New Metabolic and Gene Expression Markers in Prostate Cancer.

    Science.gov (United States)

    Tessem, May-Britt; Bertilsson, Helena; Angelsen, Anders; Bathen, Tone F; Drabløs, Finn; Rye, Morten Beck

    2016-01-01

    Molecular analysis of patient tissue samples is essential to characterize the in vivo variability in human cancers which are not accessible in cell-lines or animal models. This applies particularly to studies of tumor metabolism. The challenge is, however, the complex mixture of various tissue types within each sample, such as benign epithelium, stroma and cancer tissue, which can introduce systematic biases when cancers are compared to normal samples. In this study we apply a simple strategy to remove such biases using sample selections where the average content of stroma tissue is balanced between the sample groups. The strategy is applied to a prostate cancer patient cohort where data from MR spectroscopy and gene expression have been collected from and integrated on the exact same tissue samples. We reveal in vivo changes in cancer-relevant metabolic pathways which are otherwise hidden in the data due to tissue confounding. In particular, lowered levels of putrescine are connected to increased expression of SRM, reduced levels of citrate are attributed to upregulation of genes promoting fatty acid synthesis, and increased succinate levels coincide with reduced expression of SUCLA2 and SDHD. In addition, the strategy also highlights important metabolic differences between the stroma, epithelium and prostate cancer. These results show that important in vivo metabolic features of cancer can be revealed from patient data only if the heterogeneous tissue composition is properly accounted for in the analysis.

  18. Validation of a diffusion chamber as in vitro system for the analysis of compound diffusibility through cartilage tissue.

    Science.gov (United States)

    Kreiselmeier, Alexander; Ulmer, Wolfgang; Stöve, Johannes; Wieland, Heike A; Gerwin, Nicole; Bartnik, Eckart; Schudok, Manfred; Heute, Steffen; Breitenfelder, Michael; Scharf, Hanns-Peter; Schwarz, Markus L R

    2005-08-01

    The validation of a diffusion chamber comprising a donor and a receptor side separated by a cartilage membrane was undertaken according to the basic principles described by Peng et al. (1998). The study had three targets: first to evaluate the chamber as in vitro system by the examination of the diffusibility of compound through bovine cartilage samples; second the analysis of the affinity of compound (RS-130830) to cartilage; third to test the influence of two pre-incubation periods (one or three nights) of the cartilage samples. The validation of the chamber as in vitro system for the analysis of compound diffusibility and affinity to cartilage was performed using membrane slices of fresh bovine cartilage and a hydroxamic acid derivative (RS-130830) known as matrix metalloproteinase inhibitor (MMPI). The influence of the pre-incubation of cartilage was also examined. Compound concentrations in donor, receptor and membrane were determined by high performance liquid chromatography-mass spectrometry (HPLC-MS). Diffusion could be demonstrated after 6 h and finally 24 h incubation: the compound concentration in the receptor increased from 0 to 35 microM (mean) while it decreased in the donor from 200 to 144 microM (mean). We also found compound in the cartilage membrane (approximately 1.2 nmol (mean)). Pre-incubation of cartilage samples in culture buffer is suitable as a storage procedure, since the results on the donor side only were influenced significantly but not for the receptor and the cartilage affinity. Thus, the system could clearly reflect relevant properties of the tested compound with regard to its diffusibility and affinity to cartilage tissue.

  19. Inherent organic compounds in biochar--Their content, composition and potential toxic effects.

    Science.gov (United States)

    Buss, Wolfram; Mašek, Ondřej; Graham, Margaret; Wüst, Dominik

    2015-06-01

    Pyrolysis liquids consist of thermal degradation products of biomass in various stages of its decomposition. Therefore, if biochar gets affected by re-condensed pyrolysis liquids it is likely to contain a huge variety of organic compounds. In this study the chemical composition of such compounds associated with two contaminated, high-volatile organic compound (VOC) biochars were investigated and compared with those for a low-VOC biochar. The water-soluble organic compounds with the highest concentrations in the two high-VOC biochars were acetic, formic, butyric and propionic acids; methanol, phenol, o-, m- and p-cresol, and 2,4-dimethylphenol, all with concentrations over 100 μg g(-1). The concentrations of 16 US EPA PAHs determined by 36 h toluene extractions were 6.09 μg g(-1) for the low-VOC biochar. For high-VOC biochar the total concentrations were 53.42 μg g(-1) and 27.89 μg g(-1), while concentrations of water-soluble PAHs ranged from 1.5 to 2 μg g(-1). Despite the concentrations of PAHs exceeding biochar guideline values, it was concluded that, for these particular biochars, the biggest concern for application to soil would be the co-occurrence of VOCs such as low molecular weight (LMW) organic acids and phenols, as these can be highly mobile and have a high potential to cause phytotoxic effects. Therefore, based on results of this study we strongly suggest for VOCs to be included among criteria for assessment of biochar quality. Copyright © 2015 Elsevier Ltd. All rights reserved.

  20. The influence of beverage composition on delivery of phenolic compounds from coffee and tea.

    Science.gov (United States)

    Ferruzzi, Mario G

    2010-04-26

    Epidemiological data suggest that consumption of coffee and tea is associated with a reduced risk of several chronic and degenerative diseases including cardiovascular disorders, diabetes, obesity and neurodegenerative disorders. Both coffee and tea are a rich source of phenolic compounds including chlorogenic acids in coffee; and flavan-3-ols as well as complex theaflavins and thearubigens in tea. Coffee and tea are two of the most commonly consumed beverages in the world and thus represent a significant opportunity to positively affect disease risk and outcomes globally. Central to this opportunity is a need to better understand factors that may affect the bioavailability of specific phenolic components from coffee and tea based beverages. An overview of the phenolic composition of coffee and tea is discussed in the context of how processing and composition might influence phenolic profiles and bioavailability of individual phenolic components. Specifically, the impact of beverage formulation, the extent and type of processing and the influence of digestion on stability, bioavailability and metabolism of bioactive phenolics from tea and coffee are discussed. The impact of co-formulation with ascorbic acid and other phytochemicals are discussed as strategies to improve absorption of these health promoting phytochemicals. A better understanding of how the beverage composition impacts phenolic profiles and their bioavailability is critical to development of beverage products designed to deliver specific health benefits. Copyright 2010 Elsevier Inc. All rights reserved.

  1. Biomineralization of Engineered Spider Silk Protein-Based Composite Materials for Bone Tissue Engineering

    Directory of Open Access Journals (Sweden)

    John G. Hardy

    2016-07-01

    Full Text Available Materials based on biodegradable polyesters, such as poly(butylene terephthalate (PBT or poly(butylene terephthalate-co-poly(alkylene glycol terephthalate (PBTAT, have potential application as pro-regenerative scaffolds for bone tissue engineering. Herein, the preparation of films composed of PBT or PBTAT and an engineered spider silk protein, (eADF4(C16, that displays multiple carboxylic acid moieties capable of binding calcium ions and facilitating their biomineralization with calcium carbonate or calcium phosphate is reported. Human mesenchymal stem cells cultured on films mineralized with calcium phosphate show enhanced levels of alkaline phosphatase activity suggesting that such composites have potential use for bone tissue engineering.

  2. Macronutrient composition determines accumulation of persistent organic pollutants from dietary exposure in adipose tissue of mice

    DEFF Research Database (Denmark)

    Myrmel, Lene Secher; Fjære, Even; Midtbø, Lisa Kolden

    2016-01-01

    Accumulation of persistent organic pollutants (POPs) has been linked to adipose tissue expansion. As different nutrients modulate adipose tissue development, we investigated the influence of dietary composition on POP accumulation, obesity development and related disorders. Lifespan was determined...... in mice fed fish-oil-based high fat diets during a long-term feeding trial and accumulation of POPs was measured after 3, 6 and 18months of feeding. Further, we performed dose-response experiments using four abundant POPs found in marine sources, PCB-153, PCB-138, PCB-118 and pp'-DDE as single congeners...

  3. The Compositional HJ-Biplot-A New Approach to Identifying the Links among Bioactive Compounds of Tomatoes.

    Science.gov (United States)

    Hernández Suárez, Marcos; Molina Pérez, Daniel; Rodríguez-Rodríguez, Elena M; Díaz Romero, Carlos; Espinosa Borreguero, Francisco; Galindo-Villardón, Purificación

    2016-11-02

    Tomatoes have been described as a functional food because of their particular composition of different bioactive compounds. In this study, the proximate composition, minerals and trace elements, and antioxidant compounds were determined in two tomato cultivars (Mariana and Dunkan) that were grown in Gran Canaria (Spain) either conventionally or hydroponically. Although compositional data of this type require being subjected to the specific statistical techniques of compositional analysis, this approach has not usually been considered in this context. In the present case, a compositional Mann-Whitney U test of the data showed significant differences for each factor (cultivar and cultivation system) in several of the compositional variables studied. For the differences between cultivars, these parameters were the protein, Mg, lycopene, ascorbic acid, citric acid, and fumaric acid contents. For the differences between cultivation systems, they were mainly those of the mineral and trace elements group. Although one-year data are insufficient to make clear relationship among compounds because more repetitions in several localities and years are necessary, the compositional HJ-biplot (in which the links provide estimates of the linear relationship among variables) results agreed with other scientific results about linear relationship among some compounds analyzed.

  4. The Compositional HJ-Biplot—A New Approach to Identifying the Links among Bioactive Compounds of Tomatoes

    Directory of Open Access Journals (Sweden)

    Marcos Hernández Suárez

    2016-11-01

    Full Text Available Tomatoes have been described as a functional food because of their particular composition of different bioactive compounds. In this study, the proximate composition, minerals and trace elements, and antioxidant compounds were determined in two tomato cultivars (Mariana and Dunkan that were grown in Gran Canaria (Spain either conventionally or hydroponically. Although compositional data of this type require being subjected to the specific statistical techniques of compositional analysis, this approach has not usually been considered in this context. In the present case, a compositional Mann–Whitney U test of the data showed significant differences for each factor (cultivar and cultivation system in several of the compositional variables studied. For the differences between cultivars, these parameters were the protein, Mg, lycopene, ascorbic acid, citric acid, and fumaric acid contents. For the differences between cultivation systems, they were mainly those of the mineral and trace elements group. Although one-year data are insufficient to make clear relationship among compounds because more repetitions in several localities and years are necessary, the compositional HJ-biplot (in which the links provide estimates of the linear relationship among variables results agreed with other scientific results about linear relationship among some compounds analyzed.

  5. Highly Concentrated Alginate-Gellan Gum Composites for 3D Plotting of Complex Tissue Engineering Scaffolds

    Directory of Open Access Journals (Sweden)

    Ashwini Rahul Akkineni

    2016-04-01

    Full Text Available In tissue engineering, additive manufacturing (AM technologies have brought considerable progress as they allow the fabrication of three-dimensional (3D structures with defined architecture. 3D plotting is a versatile, extrusion-based AM technology suitable for processing a wide range of biomaterials including hydrogels. In this study, composites of highly concentrated alginate and gellan gum were prepared in order to combine the excellent printing properties of alginate with the favorable gelling characteristics of gellan gum. Mixtures of 16.7 wt % alginate and 2 or 3 wt % gellan gum were found applicable for 3D plotting. Characterization of the resulting composite scaffolds revealed an increased stiffness in the wet state (15%–20% higher Young’s modulus and significantly lower volume swelling in cell culture medium compared to pure alginate scaffolds (~10% vs. ~23%. Cytocompatibility experiments with human mesenchymal stem cells (hMSC revealed that cell attachment was improved—the seeding efficiency was ~2.5–3.5 times higher on the composites than on pure alginate. Additionally, the composites were shown to support hMSC proliferation and early osteogenic differentiation. In conclusion, print fidelity of highly concentrated alginate-gellan gum composites was comparable to those of pure alginate; after plotting and crosslinking, the scaffolds possessed improved qualities regarding shape fidelity, mechanical strength, and initial cell attachment making them attractive for tissue engineering applications.

  6. Development of high strength hydroxyapatite for bone tissue regeneration using nanobioactive glass composites

    Energy Technology Data Exchange (ETDEWEB)

    Shrivastava, Pragya; Dalai, Sridhar; Vijayalakshmi, S. [Centre for Research in Nanotechnology and Science, IIT Bombay (India); Sudera, Prerna; Sivam, Santosh Param [Amity Institute of Nanotechnology, Amity University, Noida, Uttar Pradesh-201303 (India); Sharma, Pratibha [Dept of Energy Science and Engineering, IIT Bombay (India)

    2013-02-05

    With an increasing demand of biocompatible bone substitutes for the treatment of bone diseases and bone tissue regeneration, bioactive glass composites are being tested to improvise the osteoconductive as well as osteoinductive properties. Nanobioactive glass (nBG) composites, having composition of SiO{sub 2} 70 mol%, CaO 26 mol % and P{sub 2}O{sub 5} 4 mol% were prepared by Freeze drying method using PEG-PPG-PEG co-polymer. Polymer addition improves the mechanical strength and porosity of the scaffold of nBG. Nano Bioactive glass composites upon implantation undergo specific reactions leading to the formation of crystalline hydroxyapatite (HA). This is tested in vitro using Simulated Body Fluid (SBF). This high strength hydroxyapatite (HA) layer acts as osteoconductive in cellular environment, by acting as mineral base of bones, onto which new bone cells proliferate leading to new bone formation. Strength of the nBG composites as well as HA is in the range of cortical and cancellous bone, thus proving significant for bone tissue regeneration substitutes.

  7. Investigations on some metabolites of Tecoma stans Juss. callus tissue. Part II. Chromatographical analysis of alkaloid and quinone compounds

    Directory of Open Access Journals (Sweden)

    Barbara Dohnal

    2015-01-01

    Full Text Available Tecoma stans Juss. callus tissue grown on Murashige-Mei Lie Lin (M-L and Murashige-Skoog (RT-k medium supplemented with Tecoma alkaloid precursors like lysine, mevalonic acid lactone and quinolinic acid, were investigated for their alkaloid content by thin-layer (TLC and paper (PC chromatography methods. The results were compared with those obtained by parallel analysis of greenhouse plant leaves. Seven alkaloid spots were detected in the leaf extracts, namely: actinidine, 4-noractinidine, boschniakine, tecomanine, two spots of skytanthine derivatives and one unidentified spot. Only l spot corresponding to skytanthine derivatives appeard in the extracts of callus tissues cultured on basal M-L medium or supplemented with lysine or mevalonic acid lactone. However, 3 alkaloid spots were revealed in extracts of homogeneous parenchyma-like callus tissues obtained o-n, RT-k medium. Beside the skytanthine derivatives rnentioned above, actinidine and tecomanine were identified, and moreover, in callus tissues growing on the same medium (RT-k supplemented with quinolinic acid, boschniakine was found. It was found that T. stans leaves as well as callus tissues cultured on RT-k medium contained traces of lapachol and another quinone-type compound.

  8. Nano-hydroxyapatite composite biomaterials for bone tissue engineering--a review.

    Science.gov (United States)

    Venkatesan, Jayachandran; Kim, Se-Kwon

    2014-10-01

    In recent years, significant development has been achieved in the construction of artificial bone with ceramics, polymers and metals. Nano-hydroxyapatite (nHA) is widely used bioceramic material for bone graft substitute owing to its biocompatibility and osteoconductive properties. nHA with chitin, chitosan, collagen, gelatin, fibrin, polylactic acid, polycaprolactone, poly(lactic-co-glycolic) acid, polyamide, polyvinyl alcohol, polyurethane and polyhydroxybutyrate based composite scaffolds have been explored in the present review for bone graft substitute. This article further reviews the preparative methods, chemical interaction, biocompatibiity, biodegradation, alkaline phosphatase activity, mineralization effect, mechanical properties and delivery of nHA-based nanocomposites for bone tissue regeneration. The nHA based composite biomaterials proved to be promising biomaterials for bone tissue engineering.

  9. Fatty acid composition of adipose tissue triglycerides after weight loss and weight maintenance

    DEFF Research Database (Denmark)

    Kunešová, M; Hlavatý, P; Tvrzická, E

    2012-01-01

    Fatty acid composition of adipose tissue changes with weight loss. Palmitoleic acid as a possible marker of endogenous lipogenesis or its functions as a lipokine are under debate. Objective was to assess the predictive role of adipose triglycerides fatty acids in weight maintenance in participants...... of the DIOGENES dietary intervention study. After an 8-week low calorie diet (LCD) subjects with > 8 % weight loss were randomized to 5 ad libitum weight maintenance diets for 6 months: low protein (P)/low glycemic index (GI) (LP/LGI), low P/high GI (LP/HGI), high P/low GI (HP/LGI), high P/high GI (HP....../HGI), and a control diet. Fatty acid composition in adipose tissue triglycerides was determined by gas chromatography in 195 subjects before the LCD (baseline), after LCD and weight maintenance. Weight change after the maintenance phase was positively correlated with baseline adipose palmitoleic (16:1n-7...

  10. Perfluorinated compounds, polychlorinated biphenyls, and organochlorine pesticide contamination in composite food samples from Dallas, Texas, USA.

    Science.gov (United States)

    Schecter, Arnold; Colacino, Justin; Haffner, Darrah; Patel, Keyur; Opel, Matthias; Päpke, Olaf; Birnbaum, Linda

    2010-06-01

    The objective of this article is to extend our previous studies of persistent organic pollutant (POP) contamination of U.S. food by measuring perfluorinated compounds (PFCs), organochlorine pesticides, and polychlorinated biphenyls (PCBs) in composite food samples. This study is part of a larger study reported in two articles, the other of which reports levels of polybrominated diphenyl ethers and hexabromocyclododecane brominated flame retardants in these composite foods [Schecter et al. 2010. Polybrominated diphenyl ethers (PBDEs) and hexabromocyclodecane (HBCD) in composite U.S. food samples, Environ Health Perspect 118:357-362]. In this study we measured concentrations of 32 organochlorine pesticides, 7 PCBs, and 11 PFCs in composite samples of 31 different types of food (310 individual food samples) purchased from supermarkets in Dallas, Texas (USA), in 2009. Dietary intake of these chemicals was calculated for an average American. Contamination varied greatly among chemical and food types. The highest level of pesticide contamination was from the dichlorodiphenyltrichloroethane (DDT) metabolite p,p -dichlorodiphenyldichloroethylene, which ranged from 0.028 ng/g wet weight (ww) in whole milk yogurt to 2.3 ng/g ww in catfish fillets. We found PCB congeners (28, 52, 101, 118, 138, 153, and 180) primarily in fish, with highest levels in salmon (PCB-153, 1.2 ng/g ww; PCB-138, 0.93 ng/g ww). For PFCs, we detected perfluorooctanoic acid (PFOA) in 17 of 31 samples, ranging from 0.07 ng/g in potatoes to 1.80 ng/g in olive oil. In terms of dietary intake, DDT and DDT metabolites, endosulfans, aldrin, PCBs, and PFOA were consumed at the highest levels. Despite product bans, we found POPs in U.S. food, and mixtures of these chemicals are consumed by the American public at varying levels. This suggests the need to expand testing of food for chemical contaminants.

  11. The donor management algorithm in transplantation of a composite facial tissue allograft.. First experience in Russia

    Directory of Open Access Journals (Sweden)

    V. V. Uyba

    2016-01-01

    Full Text Available In the period from 2005 to December 2015, 37 transplantations of vascularized composite facial tissue allografts (VCAs were performed in the world. A vascularized composite tissue allotransplantation has been recognized as a solid organ transplantation rather than a special kind of tissue transplantation. The recent classification of composite tissue allografts into the category of donor organs gave rise to a number of organizational, ethical, legal, technical, and economic problems. In May 2015, the first successful transplantation of a composite facial tissue allograft was performed in Russia. The article describes our experience of multiple team interactions at donor management stage when involved in the identification, conditioning, harvesting, and delivering donor organs to various hospitals. A man, aged 51 years old, diagnosed with traumatic brain injury became a donor after the diagnosis of brain deathhad been made, his death had been ascertained, and the requested consent for organ donation had been obtained from relatives. At donor management stage, a tracheostomy was performed and a posthumous facial mask was molded. The "face first, concurrent completion" algorithm was chosen for organ harvesting and facial VCA procurement; meanwhile, the facial allograft was procured as the "full face" category. The total surgery duration from the incision to completing the procurement (including that of solid organs made 8 hours 20 minutes. Immediately after the procurement, the facial VCA complex was sent to the St. Petersburg clinic by medical aircraft transportation, and was there transplanted 9 hours later. Donor kidneys were transported to Moscow bycivil aviation and transplanted 17 and 20 hours later. The authors believe that this clinical case report demonstrates the feasibility and safety of multiple harvesting of solid organs and a vascularized composite facial tissue allograft. However, this kind of surgery requires an essential

  12. Dietary conjugated linoleic acids affect tissue lipid composition but not de novo lipogenesis in finishing pigs

    OpenAIRE

    Bee , Giuseppe

    2001-01-01

    International audience; Dietary conjugated linoleic acids (CLA) have been reported to profoundly affect lipid metabolism and to act as repartitioning agents. Currently, little is known about their effect on the fatty acid profile of tissue lipids in pigs. In the present study we determined the lipid composition of the backfat inner (BFI) and outer layer (BFO), omental fat (OF) and intramuscular fat (IMF) of the longissimus dorsi muscle in 24 Swiss Large White pigs fed diets supplemented eithe...

  13. Nutrition-dependent changes of mouse adipose tissue compositions monitored by NMR, MS, and chromatographic methods.

    Science.gov (United States)

    Popkova, Yulia; Meusel, Andrej; Breitfeld, Jana; Schleinitz, Dorit; Hirrlinger, Johannes; Dannenberger, Dirk; Kovacs, Peter; Schiller, Jürgen

    2015-07-01

    Many diseases nowadays are assumed to be genetically determined. Therefore, many knockout mouse models have been established and are widely used. Unfortunately, nutrition (in particular the fat content of food) is often neglected in studies on these disease models. In this study the effects of nutrition on the lipid (triacylglycerol, TAG) compositions of different mouse adipose tissues were investigated. Mice were subjected to different diets [high fat (HF) vs. standard diet (SD)] and different adipose tissue samples (brown, visceral, and subcutaneous fat) were isolated after 12 weeks. Subsequent to lipid extraction, the organic extracts were analyzed by mass spectrometry (MALDI and ESI), high-resolution (1)H and (31)P NMR spectroscopy, high-performance thin-layer chromatography (HPTLC), and gas chromatography (GC). In adipose tissue of mice fed with HF diet, (a) decreased double bond contents and (b) decreased fatty acyl chain lengths of tissue TAGs were observed; this trend could be concomitantly monitored by all methods used. However, the adipose tissue still contained significant amounts of slightly unsaturated fatty acyl residues (18:1). Thus, a certain double bond content seems necessary to maintain the properties of adipose tissues.

  14. 3D Printing and Electrospinning of Composite Hydrogels for Cartilage and Bone Tissue Engineering

    Directory of Open Access Journals (Sweden)

    Arianna De Mori

    2018-03-01

    Full Text Available Injuries of bone and cartilage constitute important health issues costing the National Health Service billions of pounds annually, in the UK only. Moreover, these damages can become cause of disability and loss of function for the patients with associated social costs and diminished quality of life. The biomechanical properties of these two tissues are massively different from each other and they are not uniform within the same tissue due to the specific anatomic location and function. In this perspective, tissue engineering (TE has emerged as a promising approach to address the complexities associated with bone and cartilage regeneration. Tissue engineering aims at developing temporary three-dimensional multicomponent constructs to promote the natural healing process. Biomaterials, such as hydrogels, are currently extensively studied for their ability to reproduce both the ideal 3D extracellular environment for tissue growth and to have adequate mechanical properties for load bearing. This review will focus on the use of two manufacturing techniques, namely electrospinning and 3D printing, that present promise in the fabrication of complex composite gels for cartilage and bone tissue engineering applications.

  15. Nutritional Composition and Antioxidant Capacity in Edible Flowers: Characterisation of Phenolic Compounds by HPLC-DAD-ESI/MSn

    Directory of Open Access Journals (Sweden)

    Inmaculada Navarro-González

    2014-12-01

    Full Text Available Edible flowers are commonly used in human nutrition and their consumption has increased in recent years. The aim of this study was to ascertain the nutritional composition and the content and profile of phenolic compounds of three edible flowers, monks cress (Tropaeolum majus, marigold (Tagetes erecta and paracress (Spilanthes oleracea, and to determine the relationship between the presence of phenolic compounds and the antioxidant capacity. Proximate composition, total dietary fibre (TDF and minerals were analysed according to official methods: total phenolic compounds (TPC were determined with Folin-Ciocalteu’s reagent, whereas antioxidant capacity was evaluated using Trolox Equivalent Antioxidant Capacity (TEAC and Oxygen Radical Absorbance Capacity (ORAC assays. In addition, phenolic compounds were characterised by HPLC-DAD-MSn. In relation to the nutritional value, the edible flowers had a composition similar to that of other plant foods, with a high water and TDF content, low protein content and very low proportion of total fat—showing significant differences among samples. The levels of TPC compounds and the antioxidant capacity were significantly higher in T. erecta, followed by S. oleracea and T. majus. Thirty-nine different phenolic compounds were tentatively identified, with flavonols being the major compounds detected in all samples, followed by anthocyanins and hydroxycynnamic acid derivatives. In T. erecta small proportions of gallotannin and ellagic acid were also identified.

  16. Multilayered polycaprolactone/gelatin fiber-hydrogel composite for tendon tissue engineering.

    Science.gov (United States)

    Yang, Guang; Lin, Hang; Rothrauff, Benjamin B; Yu, Shuting; Tuan, Rocky S

    2016-04-15

    Regeneration of injured tendon and ligament (T&L) remains a clinical challenge due to their poor intrinsic healing capacity. Tissue engineering provides a promising alternative treatment approach to facilitate T&L healing and regeneration. Successful tendon tissue engineering requires the use of three-dimensional (3D) biomimetic scaffolds that possess the physical and biochemical features of native tendon tissue. We report here the development and characterization of a novel composite scaffold fabricated by co-electrospinning of poly-ε-caprolactone (PCL) and methacrylated gelatin (mGLT). We found that photocrosslinking retained mGLT, resulted in a uniform distribution of mGLT throughout the depth of scaffold and also preserved scaffold mechanical strength. Moreover, photocrosslinking was able to integrate stacked scaffold sheets to form multilayered constructs that mimic the structure of native tendon tissues. Importantly, cells impregnated into the constructs remained responsive to topographical cues and exogenous tenogenic factors, such as TGF-β3. The excellent biocompatibility and highly integrated structure of the scaffold developed in this study will allow the creation of a more advanced tendon graft that possesses the architecture and cell phenotype of native tendon tissues. The clinical challenges in tendon repair have spurred the development of tendon tissue engineering approaches to create functional tissue replacements. In this study, we have developed a novel composite scaffold as a tendon graft consisting of aligned poly-ε-caprolactone (PCL) microfibers and methacrylated gelatin (mGLT). Cell seeding and photocrosslinking between scaffold layers can be performed simultaneously to create cell impregnated multilayered constructs. This cell-scaffold construct combines the advantages of PCL nanofibrous scaffolds and photocrosslinked gelatin hydrogels to mimic the structure, mechanical anisotropy, and cell phenotype of native tendon tissue. The scaffold

  17. [An alternative model of composite tissue transplantation in rat: the femur osteomyocutaneous flap].

    Science.gov (United States)

    Chen, Jianwu; Zhang, Dongliang; Chen, Chen; Su, Yingjun; Wang, Shiping; Guo, Shuzhong

    2014-01-01

    To reconstruct a simpler and reliable composite tissue transplantation model-the femur osteomyocutaneous flap for the replacement of hindlimb transplantation. Ten femur osteomyocutaneous flaps from 5 Lewis rats were transplanted into 10 syngeneic recipients' inguinal region. Their nutrient vessels were anastomosed with recipients vessels. The graft of this model was consisted of the groin flap and partial femur. To verify the feasibility of this model, gross and histological appearance were studied after transplantation to evaluate the viability of grafts. The operative time was (159.0 +/- 8.3) min with the harvesting time of (68.0 +/- 4.8) min and the ischemia time of (55. 8 +/- 6.8) min. The methylene blue injection showed rich blood supply of transplanted femur osteomyocutaneous flap. All the 10 flaps survived completely with pink skin color and hair regrowth. The histologic examination of the flaps also revealed the normal appearance of the viable skin and bone marrow. The femur osteomyocutaneous flap is a simple and reliable model for composite tissue transplantation, and its establishment will provide a new tool for the study of composite tissue allografts.

  18. Induction of bioactive compound composition from marine microalgae (Lyngbya sp. by using different stress condition

    Directory of Open Access Journals (Sweden)

    Nurul Farhana Rosly

    2013-10-01

    Full Text Available Objective: To the effect of salinity stress on the production of microalgae (Lyngbya sp. and chlorophyll pigments in the growth medium. Methods: Stress was investigated by using green algae strains Lyngbya sp. in response to change bioactive compounds without any modification of cell growth and biomass production rate. The different stress conditions like 10%-40% were analyzed. Results: During the stress condition, various biochemical and microbiological assays were monitored. The photochemical composition was evaluated by GC-MS studies. The studies expressed that 30% higher salinity stress was suitable for high phytochemical production rate including chlorophyll content. Conclusions: Our study indicates the wide range of salinity stress to enhance the growth on microalgae culture and enhance the production of major secondary metabolites.

  19. A novel squid pen chitosan/hydroxyapatite/β-tricalcium phosphate composite for bone tissue engineering

    Energy Technology Data Exchange (ETDEWEB)

    Shavandi, Amin, E-mail: amin.shavandi@postgrad.otago.ac.nz [Department of Food Sciences, University of Otago, Dunedin (New Zealand); Department of Applied Sciences, University of Otago, Dunedin (New Zealand); Bekhit, Alaa El-Din A. [Department of Food Sciences, University of Otago, Dunedin (New Zealand); Sun, Zhifa; Ali, Azam [Department of Physics, University of Otago, Dunedin (New Zealand); Gould, Maree [Department of Anatomy, University of Otago, Dunedin (New Zealand)

    2015-10-01

    Squid pen chitosan was used in the fabrication of biocomposite scaffolds for bone tissue engineering. Hydroxyapatite (HA) and beta-tricalcium phosphate (β-TCP) obtained from waste mussel shells were used as the calcium phosphate source. The composite was prepared using 2.5% tripolyphosphate (TPP) and 1% glycerol as a cross-linker and plasticizer, respectively. The weight percent (wt.%) ratios of the ceramic components in the composite were 20/10/70, 30/20/50 and 40/30/30 (HA/β-TCP/Chi). The biodegradation rate and structural properties of the scaffolds were investigated. Scanning electron microscopy (SEM) and microCT(μCT) results indicated that the composites have a well defined lamellar structure with an average pore size of 200 μm. The porosity of the composites decreased from 88 to 56% by increasing the ratio of HA/β-TCP from 30 to 70%. After 28 days of incubation in a physiological solution, the scaffolds were degraded by approximately 30%. In vitro investigations showed that the composites were cytocompatible and supported the growth of L929 and Saos-2 cells. The obtained data suggests that the squid pen chitosan composites are potential candidates for bone regeneration. - Highlights: • Biocomposite scaffolds were made from mussel shells HA and β-TCP, and squid pin chitosan. • The porosity of the composites decreased with an increase in HA/β-TCP ratio. • Composites were cytocompatible and supported the growth of L929 and Saos-2 cells. • Composite containing 50% HA and β-TCP had the best mechanical properties.

  20. In vitro evaluation of alginate/halloysite nanotube composite scaffolds for tissue engineering

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Mingxian [Department of Materials Science and Engineering, Jinan University, Guangzhou 510632 (China); Dai, Libing [Guangzhou Institute of Traumatic Surgery, Guangzhou Red Cross Hospital Medical College, Jinan University, Guangzhou 510220 (China); Shi, Huizhe; Xiong, Sheng [Institute of Biomedicine, National Engineering Research Center of Genetic Medicine, Jinan University, Guangzhou 510632 (China); Zhou, Changren, E-mail: tcrz9@jnu.edu.cn [Department of Materials Science and Engineering, Jinan University, Guangzhou 510632 (China)

    2015-04-01

    In this study, a series of alginate/halloysite nanotube (HNTs) composite scaffolds were prepared by solution-mixing and freeze-drying method. HNTs are incorporated into alginate to improve both the mechanical and cell-attachment properties of the scaffolds. The interfacial interactions between alginate and HNTs were confirmed by the atomic force microscope (AFM), transmission electron microscope (TEM) and FTIR spectroscopy. The mechanical, morphological, and physico-chemical properties of the composite scaffolds were investigated. The composite scaffolds exhibit significant enhancement in compressive strength and compressive modulus compared with pure alginate scaffold both in dry and wet states. A well-interconnected porous structure with size in the range of 100–200 μm and over 96% porosity is found in the composite scaffolds. X-ray diffraction (XRD) result shows that HNTs are uniformly dispersed and partly oriented in the composite scaffolds. The incorporation of HNTs leads to increase in the scaffold density and decrease in the water swelling ratio of alginate. HNTs improve the stability of alginate scaffolds against enzymatic degradation in PBS solution. Thermogravimetrica analysis (TGA) shows that HNTs can improve the thermal stability of the alginate. The mouse fibroblast cells display better attachment to the alginate/HNT composite than those to the pure alginate, suggesting the good cytocompatibility of the composite scaffolds. Alginate/HNT composite scaffolds exhibit great potential for applications in tissue engineering. - Highlights: • We fabricated HNTs reinforced alginate composite scaffolds for biomedical applications. • The hydrogen bond interactions between HNTs and alginate are confirmed. • HNTs can significantly enhance the mechanical properties of alginate scaffold. • The scaffolds exhibit a highly porous structure with interconnected pores. • HNTs can improve the cell attachment and proliferation on alginate.

  1. Drug delivery using composite scaffolds in the context of bone tissue engineering

    Science.gov (United States)

    Romagnoli, Cecilia; D’Asta, Federica; Brandi, Maria Luisa

    2013-01-01

    Summary Introduction Due to the disadvantages of the current bone autograft and allograft in many clinical condition in which bone regeneration is required in large quantity, engineered biomaterials combined with growth factors, such as bone morphogenetic protein-2 (BMP-2), have been demonstrated to be an effective approach in bone tissue engineering, since they can act both as a scaffold and as a drug delivery system to promote bone repair and regeneration. Area covered Recent advantages in the field of engineered scaffolds have been obtained from the investigation of composite scaffolds designed by the combination of bioceramics, especially hydroxyapatite (HA), and biodegradable polymers, such as poly (D,L-lactide-co-glycolide) (PLGA) and chitosan, in order to realize osteoconductive structures that can mimic the natural properties of bone tissue. Herein it is demonstrated that the incorporation of BMP-2 into different composite scaffolds, by encapsulation, absorption or entrapment, could be advantageous in terms of osteoinduction for new bone tissue engineered scaffolds as drug delivery systems and some of them should be further analyzed to optimized the drug release for future therapeutic applications. Expert opinion New design concepts and fabrication techniques represent novel challenges for further investigations about the development of scaffolds as a drug delivery system for bone tissue regeneration. PMID:24554923

  2. Stable hydrogen, oxygen and sulfur isotopes composition in different tissues of cattle

    International Nuclear Information System (INIS)

    Sun Fengmei; Shi Guangyu; Wang Huiwen; Yang Shuming

    2012-01-01

    In order to research on stable hydrogen, oxygen, sulfur isotopes composition in different tissues of cattle, as well as the breed, δ 2 H and δ 34 S values of different defatted muscle, cattle tail hair, blood, liver, also δ 2h and δ 18 O values of water from muscle were determined by isotope ratio mass spectrometry. The stable sulfur isotope composition was not affected by cattle variety, meanwhile the hydrogen was uncertain; the δ 2 H and δ 34 S values between different defatted muscle, blood, liver, cattle hair were significantly different, at the same time the δ 34 S and δ 2 H values between each tissue were not significantly correlated; the δ 2 H values were strongly correlated with the δ 18 O values of muscle water. The above results indicated that stable sulfur and hydrogen isotopes fractionation in the various tissues were discrepant, thus the proper tissue should be selected according to the purpose and object in the beef traceability. (authors)

  3. Chemical composition, fatty acid profile and bioactive compounds of guava seeds (Psidium guajava L.

    Directory of Open Access Journals (Sweden)

    Ana Maria Athayde Uchôa-thomaz

    2014-09-01

    Full Text Available This study aimed to characterize the chemical composition, determine the fatty acid profile, and quantify the bioactive compounds present in guava seed powder (Psidium guajava L.. The powder resulted from seeds obtained from guava pulp processing. The agro-industrial seeds from red guava cv. paluma were used, and they were donated by a frozen pulp fruit manufacturer. They contain varying amounts of macronutrients and micronutrients, with a high content of total dietary fiber (63.94 g/100g, protein (11.19 g/100g, iron (13.8 mg/100g, zinc (3.31 mg/100g, and reduced calorie content (182 kcal/100g. Their lipid profile showed a predominance of unsaturated fatty acids (87.06%, especially linoleic acid (n6 and oleic acid (n9. The powder obtained contained significant amounts of bioactive compounds such as ascorbic acid (87.44 mg/100g, total carotenoids (1.25 mg/100 g and insoluble dietary fiber (63.55 g/100g. With regard to their microbiological quality, the samples were found suitable for consumption. Based on these results, it can be concluded that the powder produced has favorable attributes for industrial use, and that use of these seeds would be a viable alternative to prevent various diseases and malnutrition in our country and to reduce the environmental impact of agricultural waste.

  4. Systematic chemical analysis approach reveals superior antioxidant capacity via the synergistic effect of flavonoid compounds in red vegetative tissues

    Science.gov (United States)

    Qin, Xiaoxiao; Lu, Yanfen; Peng, Zhen; Fan, Shuangxi; Yao, Yuncong

    2018-02-01

    The flavonoid system comprises an abundance of compounds with multiple functions; however, their potential synergism in antioxidant function remains unclear. We established an approach using ever-red (RL) and ever-green leaves (GL) of crabapple cultivars during their development to determine interrelationships among flavonoid compounds. RL scored significantly better than GL in terms of the type, composition, and diversity of flavonoids than GL. Principal component analysis predicted flavonoids in RL to have positive interaction effects, and the total antioxidant capacity was significantly higher than the sum of antioxidant capacities of the individual compounds. This synergy was verified by the high antioxidant capacity in rat serum after feeding on red leaves. Our findings suggest that the synergistic effect is a result of the high transcription levels regulated by McMYBs in RL. In summary, individual flavonoids cooperate in a flavonoid system, thus producing a synergistic antioxidant effect, and the approach used herein can provide insights into the roles of flavonoids and other compounds in future studies.

  5. Shear Characteristics of Hybrid Composites with Non-Woven Carbon Tissue

    Science.gov (United States)

    Lee, Seung-Hwan; Noguchi, Hiroshi

    Mechanical shear characteristics of hybrid composites with non-woven carbon tissue (NWCT) are investigated under uni-axial static tensile loadings. In-plane characteristics were studied on [±45]3S angle-ply CFRP laminates and [+45/-45/+45/-45/+45/-45]S angle-ply hybrid laminates. Here, the symbol “/” means that the NWCT is located at an interface between CFRP layers. A new estimation method was proposed for the stiffness of hybrid composites. Chord shear modulus and 0.2%-offset shear strength of hybrid laminates were compared with those of CFRP laminates. Results estimated with the new method were compared with results of experiments and an ordinary rule of mixtures, and then the validity was confirmed. The hybrid angle-ply laminate seems to be effective to improve the shear characteristics. The damage and failure mechanisms of the hybrid composites were discussed through observation results with an optical microscope.

  6. Sexual Differences in Chemical Composition and Aroma-active Compounds of Essential Oil from Flower Buds of Eurya japonica.

    Science.gov (United States)

    Miyazawa, Mitsuo; Usami, Atsushi; Tanaka, Takio; Tsuji, Kaoru; Takehara, Manami; Hori, Yuki

    2016-01-01

    This study was conducted to determine the composition of essential oil from buds of male and female Eurya japonica flowers and to determine the aroma-active compounds of this plant by gas chromatography-mass spectrometry (GC-MS), sensory evaluation, and odor activity values (OAV). The oils contained eighty-five compounds. We identified for the first time forty-four compounds in E. japonica. Through sensory evaluation, nineteen aroma-active compounds were identified by gas chromatography-olfactometry (GC-O). Because the chemical composition can affect the interaction between plants and herbivorous insects, our results suggest that essential oils from male and female flower buds of E. japonica differently affect herbivores. Sexual differences in essential oils deserve further investigations in this plant-insect system.

  7. Effect of fermentation temperature and culture media on the yeast lipid composition and wine volatile compounds.

    Science.gov (United States)

    Beltran, Gemma; Novo, Maite; Guillamón, José M; Mas, Albert; Rozès, Nicolas

    2008-01-31

    The temperature of a wine fermentation strongly affects lipid metabolism and thus, aromatic profiles. Most of the metabolic studies are done in well-controlled laboratory conditions, yet wine is produced in less-reproducible industrial conditions. The aim of this study is to analyse the effect of fermentation temperature (13 degrees C and 25 degrees C) and culture media (synthetic media and grape must) on yeast lipid composition and volatile compounds in wine. Our results show that yeast viability was better at 13 degrees C than at 25 degrees C whichever growth medium is used, but that the complexity of the grape must enabled cells to reach higher viable population size. Viability was also related to the incorporation of linoleic acid and beta-sitosterol, which were present in the grape must. A lower temperature modified the cellular lipid composition of yeast, increasing the degree of unsaturation at the beginning of fermentation and decreasing the chain length as fermentation progressed. We also found that medium-chain fatty acids, mainly dodecanoic acid, were present in the cell phospholipids. Wines produced from grape must were more aromatic and had a lower volatile acidity content than those derived from a synthetic medium. Fermentations that were performed at the lower temperature also emphasized this feature.

  8. Characterisation of various grape seed oils by volatile compounds, triacylglycerol composition, total phenols and antioxidant capacity.

    Science.gov (United States)

    Bail, Stefanie; Stuebiger, Gerald; Krist, Sabine; Unterweger, Heidrun; Buchbauer, Gerhard

    2008-06-01

    Grape seed oil (Oleum vitis viniferae) representing a promising plant fat, mainly used for culinary and pharmaceutical purposes as well as for various technical applications, was subject of the present investigation. HS-SPME-GC-MS was applied to study volatile compounds in several seed oil samples from different grape oils. The triacylglycerol (TAG) composition of these oils was analyzed by MALDI-TOF-MS/MS. In addition the total phenol content and the antioxidant capacity (using TEAC) of these oils were determined. The headspace of virgin grape oils from white and red grapes was dominated by ethyl octanoate (up to 27.5% related to the total level of volatiles), ethylacetate (up to 25.0%), ethanol (up to 22.7%), acetic acid (up to 17.2%), ethyl hexanoate (up to 17.4%) and 3-methylbutanol (up to 11.0%). Triacylglycerol composition was found to be dominated by LLL (up to 41.8%), LLP (up to 24.3%), LLO (up to 16.3%) and LOO (up to 11.7%), followed by LOP (up to 9.3%) and LOS/OOO (up to 4.3%). Total phenol content ranged between 59μg/g and 115.5μg/g GAE. Antioxidant capacity (TEAC) was analyzed to range between 0.09μg/g and 1.16μg/g. Copyright © 2007 Elsevier Ltd. All rights reserved.

  9. Graphene and poly(methyl methacrylate) composite laminates on flexible substrates for volatile organic compound detection

    Science.gov (United States)

    Rattanabut, Chanoknan; Wongwiriyapan, Winadda; Muangrat, Worawut; Bunjongpru, Win; Phonyiem, Mayuree; Song, Young Jae

    2018-04-01

    In this paper, we present a gas sensor for volatile organic compound (VOC) detection based on graphene and poly(methyl methacrylate) (GR/PMMA) composite laminates fabricated using CVD-grown graphene. Graphene was transferred to a poly(ethylene terephthalate) (PET) substrate by PMMA-supported wet transfer process without PMMA removal in order to achieve the deposition of GR/PMMA composite laminates on PET. The GR/PMMA and graphene sensors show completely different sensitivities to VOC vapors. The GR/PMMA and graphene sensors showed the highest sensitivities to dichloromethane (DCM). The response of the GR/PMMA sensor to DCM was 3 times higher than that of the graphene sensor but the GR/PMMA sensor hardly responded to acetone, chloroform, or benzene. The sensing mechanism of the graphene sensor can be based on the dielectric constant of VOCs, the size of VOC molecule, and electron hopping effects on defect graphene, while that of the GR/PMMA sensor can be explained in terms of the polymer swelling owing to the Hansen solubility parameter.

  10. DETERMINATION OF PHASE COMPOSITION OF SEALING COATING BASED ON APC (ALUMINOPHOSPHATE COMPOUNDS

    Directory of Open Access Journals (Sweden)

    BOLSHAKOV V. I.

    2017-02-01

    Full Text Available Summary. Goal. To investigate the phase composition of the obtained sealing coatings based on aluminophosphate compound (APC and the impact of temperature rise on it. Methods. Qualitative X-ray phase analysis (XRPA and differential thermal analysis (DTA are used as the methods of research. Roentgenograms for structural analysis were obtained on a DRON-4-07 using filtered copper radiation in the secondary beam. Registration and initial processing of diffraction patterns was performed using the software package PDOS with the output of the diffraction patterns on the screen. Using the "loupe" option allowed to identify weak interference lines, which increased the accuracy of the method of qualitative XRPA. The thermograms for DTA received on the device type Termoskan-2. The results. It is revealed that base of coating is X-ray amorphous phase. There are following crystalline phases: Al, AlPO4, Al (PO3 3, BN found in the coating. It is revealed that annealing doesn’t make a significant influence on the phase composition of the crystalline phases and the coating doesn’t lose properties after annealing during repeated thermal stress. Scientific novelty. The phase composition of the proposed sealing coatings based on APC and produced by plasma spraying, and the effect of annealing on the phase composition of the coating are investigated. The reaction of synthesis of primary material forming on the basis of APC for coating is offered. Practical significance. The results can be used in aviation technology in the development of gas turbine engines (GTE and the design of the compressors. The sealing coating may be used to improve the reliability of the compressor and to increase the efficiency ratio of turbine engine. During the operation the compressor’s blades touch the sealing coating of compressor’s stator and grooves it without causing locking and destruction of the rotor. Therefore, the development of new sealing coating compositions that

  11. Method for determining the composition of the sugar moiety of a sugar containing compound

    DEFF Research Database (Denmark)

    2016-01-01

    The present invention relates to methods of labeling sugar moieties of sugar containing compounds including glycopeptides. The compounds presented in the present invention facilitate reliable detection of sugar moieties of sugar containing compounds by a combination of spectroscopy methods...

  12. Composite microsphere-functionalized scaffold for the controlled release of small molecules in tissue engineering

    Directory of Open Access Journals (Sweden)

    Laura Pandolfi

    2016-01-01

    Full Text Available Current tissue engineering strategies focus on restoring damaged tissue architectures using biologically active scaffolds. The ideal scaffold would mimic the extracellular matrix of any tissue of interest, promoting cell proliferation and de novo extracellular matrix deposition. A plethora of techniques have been evaluated to engineer scaffolds for the controlled and targeted release of bioactive molecules to provide a functional structure for tissue growth and remodeling, as well as enhance recruitment and proliferation of autologous cells within the implant. Recently, novel approaches using small molecules, instead of growth factors, have been exploited to regulate tissue regeneration. The use of small synthetic molecules could be very advantageous because of their stability, tunability, and low cost. Herein, we propose a chitosan–gelatin scaffold functionalized with composite microspheres consisting of mesoporous silicon microparticles and poly(dl-lactic-co-glycolic acid for the controlled release of sphingosine-1-phospate, a small molecule of interest. We characterized the platform with scanning electron microscopy, Fourier transform infrared spectroscopy, and confocal microscopy. Finally, the biocompatibility of this multiscale system was analyzed by culturing human mesenchymal stem cells onto the scaffold. The presented strategy establishes the basis of a versatile scaffold for the controlled release of small molecules and for culturing mesenchymal stem cells for regenerative medicine applications.

  13. Automated segmentation of muscle and adipose tissue on CT images for human body composition analysis

    Science.gov (United States)

    Chung, Howard; Cobzas, Dana; Birdsell, Laura; Lieffers, Jessica; Baracos, Vickie

    2009-02-01

    The ability to compute body composition in cancer patients lends itself to determining the specific clinical outcomes associated with fat and lean tissue stores. For example, a wasting syndrome of advanced disease associates with shortened survival. Moreover, certain tissue compartments represent sites for drug distribution and are likely determinants of chemotherapy efficacy and toxicity. CT images are abundant, but these cannot be fully exploited unless there exist practical and fast approaches for tissue quantification. Here we propose a fully automated method for segmenting muscle, visceral and subcutaneous adipose tissues, taking the approach of shape modeling for the analysis of skeletal muscle. Muscle shape is represented using PCA encoded Free Form Deformations with respect to a mean shape. The shape model is learned from manually segmented images and used in conjunction with a tissue appearance prior. VAT and SAT are segmented based on the final deformed muscle shape. In comparing the automatic and manual methods, coefficients of variation (COV) (1 - 2%), were similar to or smaller than inter- and intra-observer COVs reported for manual segmentation.

  14. [The composition of the gastrointestinal bacterial flora of mouse embryos and the placenta tissue bacterial flora].

    Science.gov (United States)

    Lei, D; Lin, Y; Jiang, X; Lan, L; Zhang, W; Wang, B X

    2017-03-02

    Objective: To explore the composition of the gastrointestinal bacterial flora of mouse embryos and the placenta tissue bacterial flora. Method: Twenty-four specimens were collected from pregnant Kunming mouse including 8 mice of early embryonic (12-13 days) gastrointestinal tissues, 8 cases of late embryonic (19-20 days)gastrointestinal tissues, 8 of late pregnancy placental tissues.The 24 samples were extracted by DNeasy Blood & Tissue kit for high-throughput DNA sequencing. Result: The level of Proteobacteria, Bacteroidetes, Actino-bacteria and Firmicutes were predominantin all specimens.The relative content of predominant bacterial phyla in each group: Proteobacteria (95.00%, 88.14%, 87.26%), Bacteroidetes(1.71%, 2.15%, 2.63%), Actino-Bacteria(1.16%, 4.10%, 3.38%), Firmicutes(0.75%, 2.62%, 2.01%). At the level of family, there were nine predominant bacterial families in which Enterobacteriaeae , Shewanel laceae and Moraxellaceae were dominant.The relative content of dominant bacterial family in eachgroup: Enterobacteriaeae (46.99%, 44.34%, 41.08%), Shewanellaceae (21.99%, 21.10%, 19.05%), Moraxellaceae (9.18%, 7.09%, 5.64%). From the species of flora, the flora from fetal gastrointestinal in early pregnancy and late pregnancy (65.44% and 62.73%) were the same as that from placenta tissue in the late pregnancy.From the abundance of bacteria, at the level of family, the same content of bacteria in three groups accounted for 78.16%, 72.53% and 65.78% respectively. Conclusion: It was proved that the gastrointestinal bacterial flora of mouse embryos and the placenta tissue bacterial flora were colonized. At the same time the bacteria are classified.

  15. EuroFIR-BASIS - a combined composition and biological activity database for bioactive compounds in plant-based foods

    DEFF Research Database (Denmark)

    Gry, Jørn; Black, Lucinda; Eriksen, Folmer Damsted

    2007-01-01

    Mounting evidence suggests that certain non-nutrient bioactive compounds promote optimal human health and reduce the risk of chronic disease. An Internet-deployed database, EuroFIR-BASIS, which uniquely combines food composition and biological effects data for plant-based bioactive compounds......, is being developed. The database covers multiple compound classes and 330 major food plants and their edible parts with data sourced from quality-assessed, peer-reviewed literature. The database will be a valuable resource for food regulatory and advisory bodies, risk authorities, epidemiologists...... and researchers interested in diet and health relationships, and product developers within the food industry....

  16. Effect of oral oleoyl-estrone on adipose tissue composition in male rats.

    Science.gov (United States)

    Remesar, X; Fernández-López, J A; Blay, M T; Savall, P; Salas, A; Díaz-Silva, M; Esteve, M; Grasa, M M; Alemany, M

    2002-08-01

    To determine whether the oral administration of oleoyl-estrone has similar mass-decreasing effects on the main different sites of white adipose tissue (WAT). Adult male Zucker lean rats were given a daily oral gavage of oleoyl-estrone (OE, 10 micromol/kg) in 0.2 ml of sunflower oil for 10 days, and were compared with controls receiving only the oil. The mass of the main WAT sites: subcutaneous, epididymal, mesenteric, retroperitoneal, gluteal, perirenal and interscapular, as well as perirenal and interscapular brown adipose tissue (BAT), were dissected and studied. The tissue weight, DNA, protein, lipid and total cholesterol content, together with the levels of leptin and acyl-estrone in the larger WAT and BAT masses, were measured. The weights of WAT depots were correlated with body weight but those of BAT were not. Cell size was maximal for epididymal and mesenteric and minimal for subcutaneous and retroperitoneal WAT and BAT. Differences were detected in DNA, and in protein and lipid content between distinct WAT sites. OE treatment tended to decrease cell number and cell size in WAT; only small differences in composition were found between WAT locations inside the visceral cavity and those outside. Decreases in lipid content were maximal in mesenteric fat. Leptin and acyl-estrone content were fairly uniform at the different WAT sites, except for high concentrations in gluteal WAT. OE induced a greater decrease in leptin and acyl-estrone than in DNA and lipids; changes in these hormones were fairly parallel in all sites. In general, the differences in composition between visceral and peripheral subcutaneous WAT and their responses to OE were less marked than the individual differences observed between specific sites, regardless of location. WAT sites are fairly diverse in composition, but their response to OE treatment was uniform. OE decreased the weight of WAT through reduction of both cell numbers and size; but did not change the mass or composition of BAT

  17. Vascularized Thymosternal Composite Tissue Allo- and Xenotransplantation in Nonhuman Primates: Initial Experience

    Science.gov (United States)

    Sendil, Selin; Diaconu, Silviu C.; O’Neill, Natalie A.; Burdorf, Lars; Tatarov, Ivan; Parsell, Dawn M.; Azimzadeh, Agnes M.; Pierson, Richard N.

    2017-01-01

    Background: Vascularized composite allotransplantation is constrained by complications associated with standard immunosuppressive strategies. Vascularized thymus and bone marrow have been shown to promote prolonged graft survival in composite organ and soft-tissue vascularized composite allotransplantation models. We report development of a nonhuman primate vascularized thymosternal composite tissue transplant model as a platform to address donor-specific immune tolerance induction strategies. Methods: Vascularized thymosternal allograft (skin, muscle, thymus, sternal bone) was transplanted between MHC-mismatched rhesus monkeys (feasibility studies) and baboons (long-term survival studies), with end-to-side anastomoses of the donor aorta and SVC to the recipient common femoral vessels. A male allograft was transplanted to a female’s lower abdominal wall, and clinically applicable immunosuppression was given. Skin biopsies and immunological assays were completed at regular intervals, and chimerism was quantified using polymerase chain reaction specific for baboon Y chromosome. Results: Four allo- and 2 xenotransplants were performed, demonstrating consistent technical feasibility. In 1 baboon thymosternal allograft recipient treated with anti-CD40–based immunosuppression, loss of peripheral blood microchimerism after day 5 was observed and anticipated graft rejection at 13 days. In the second allograft, when cutaneous erythema and ecchymosis with allograft swelling was treated with anti-thymocyte globulin starting on day 6, microchimerism persisted until immunosuppression was reduced after the first month, and the allograft survived to 87 days, 1 month after cessation of immunosuppression treatment. Conclusions: We established both allo- and xeno- composite vascularized thymosternal transplant preclinical models, which will be useful to investigate the role of primarily vascularized donor bone marrow and thymus.

  18. Prediction of Local Ultimate Strain and Toughness of Trabecular Bone Tissue by Raman Material Composition Analysis

    Directory of Open Access Journals (Sweden)

    Roberto Carretta

    2015-01-01

    Full Text Available Clinical studies indicate that bone mineral density correlates with fracture risk at the population level but does not correlate with individual fracture risk well. Current research aims to better understand the failure mechanism of bone and to identify key determinants of bone quality, thus improving fracture risk prediction. To get a better understanding of bone strength, it is important to analyze tissue-level properties not influenced by macro- or microarchitectural factors. The aim of this pilot study was to identify whether and to what extent material properties are correlated with mechanical properties at the tissue level. The influence of macro- or microarchitectural factors was excluded by testing individual trabeculae. Previously reported data of mechanical parameters measured in single trabeculae under tension and bending and its compositional properties measured by Raman spectroscopy was evaluated. Linear and multivariate regressions show that bone matrix quality but not quantity was significantly and independently correlated with the tissue-level ultimate strain and postyield work (r=0.65–0.94. Principal component analysis extracted three independent components explaining 86% of the total variance, representing elastic, yield, and ultimate components according to the included mechanical parameters. Some matrix parameters were both included in the ultimate component, indicating that the variation in ultimate strain and postyield work could be largely explained by Raman-derived compositional parameters.

  19. Prediction of local ultimate strain and toughness of trabecular bone tissue by Raman material composition analysis.

    Science.gov (United States)

    Carretta, Roberto; Stüssi, Edgar; Müller, Ralph; Lorenzetti, Silvio

    2015-01-01

    Clinical studies indicate that bone mineral density correlates with fracture risk at the population level but does not correlate with individual fracture risk well. Current research aims to better understand the failure mechanism of bone and to identify key determinants of bone quality, thus improving fracture risk prediction. To get a better understanding of bone strength, it is important to analyze tissue-level properties not influenced by macro- or microarchitectural factors. The aim of this pilot study was to identify whether and to what extent material properties are correlated with mechanical properties at the tissue level. The influence of macro- or microarchitectural factors was excluded by testing individual trabeculae. Previously reported data of mechanical parameters measured in single trabeculae under tension and bending and its compositional properties measured by Raman spectroscopy was evaluated. Linear and multivariate regressions show that bone matrix quality but not quantity was significantly and independently correlated with the tissue-level ultimate strain and postyield work (r = 0.65-0.94). Principal component analysis extracted three independent components explaining 86% of the total variance, representing elastic, yield, and ultimate components according to the included mechanical parameters. Some matrix parameters were both included in the ultimate component, indicating that the variation in ultimate strain and postyield work could be largely explained by Raman-derived compositional parameters.

  20. Thermal diffusivity of in-situ exfoliated graphite intercalated compound/polyamide and graphite/polyamide composites

    Directory of Open Access Journals (Sweden)

    S. R. Kim

    2012-06-01

    Full Text Available The thermal diffusivity of graphite intercalated compound (GIC/polyamides (PA6, PA66 and PA12 and graphite/polyamides composites were investigated. The polyamides/GIC composites were prepared by an in-situ exfoliation melting process and thermal diffusivity of the composites was measured by a laser flash method. The surface chemistry of the GIC and graphite was investigated using Fourier transform infrared spectroscopy, the fracture morphology of the composites was observed by field emission scanning electron microscopy. The thermal diffusivity of the in-situ exfoliation processed PA/GIC composites showed a significant improvement over those of PA/expanded graphite intercalated compound composites and PA/graphite composites. We suggest that the larger flake size and high expansion ratio of the GIC during the in-situ exfoliation process leads to 3-dimensional conductive pathways and high thermal diffusivity. Thermal diffusivity of the polyamides/GIC (20 vol% composites was increased approximately 18 times compared to that of pure polyamides.

  1. Uniformly-dispersed nanohydroxapatite-reinforced poly(ε-caprolactone) composite films for tendon tissue engineering application.

    Science.gov (United States)

    Tong, Shi Yun; Wang, Zuyong; Lim, Poon Nian; Wang, Wilson; Thian, Eng San

    2017-01-01

    Regeneration of injuries at tendon-to-bone interface (TBI) remains a challenging issue due to the complex tissue composition involving both soft tendon tissues and relatively hard bone tissues. Tissue engineering using polymeric/ceramic composites has been of great interest to generate scaffolds for tissue's healing at TBI. Herein, we presented a novel method to blend polymers and bioceramics for tendon tissue engineering application. A homogeneous composite comprising of nanohydroxyapatite (nHA) particles in poly(ε-caprolactone) (PCL) matrix was obtained using a combination of solvent and mechanical blending process. X-ray diffraction analysis showed that the as-fabricated PCL/nHA composite film retained phase-pure apatite and semi-crystalline properties of PCL. Infrared spectroscopy spectra confirmed that the PCL/nHA composite film exhibited the characteristics functional groups of PCL and nHA, without alteration to the chemical properties of the composite. The incorporation of nHA resulted in PCL/nHA composite film with improved mechanical properties such as Young's Modulus and ultimate tensile stress, which were comparable to that of the native human rotator tendon. Seeding with human tenocytes, cells attached on the PCL/nHA composite film, and after 14days of culturing, these cells could acquire elongated morphology without induced cytotoxicity. PCL/nHA composite film could also result in increased cell metabolism with prolonged culturing, which was comparable to that of the PCL group and higher than that of the nHA group. All these results demonstrated that the developed technique of combining solvent and mechanical blending could be applied to fabricate composite films with potential for tendon tissue engineering applications. Copyright © 2016 Elsevier B.V. All rights reserved.

  2. Compton scattering spectrum as a source of information of normal and neoplastic breast tissues' composition

    Energy Technology Data Exchange (ETDEWEB)

    Antoniassi, M.; Conceicao, A.L.C. [Departamento de Fisica-Faculdade de Filosofia Ciencias e Letras de Ribeirao Preto, Universidade de Sao Paulo, Ribeirao Preto, 14040-901 Sao Paulo (Brazil); Poletti, M.E., E-mail: poletti@ffclrp.usp.br [Departamento de Fisica-Faculdade de Filosofia Ciencias e Letras de Ribeirao Preto, Universidade de Sao Paulo, Ribeirao Preto, 14040-901 Sao Paulo (Brazil)

    2012-07-15

    In this work we measured X-ray scatter spectra from normal and neoplastic breast tissues using photon energy of 17.44 keV and a scattering angle of 90 Degree-Sign , in order to study the shape (FWHM) of the Compton peaks. The obtained results for FWHM were discussed in terms of composition and histological characteristics of each tissue type. The statistical analysis shows that the distribution of FWHM of normal adipose breast tissue clearly differs from all other investigated tissues. Comparison between experimental values of FWHM and effective atomic number revealed a strong correlation between them, showing that the FWHM values can be used to provide information about elemental composition of the tissues. - Highlights: Black-Right-Pointing-Pointer X-ray scatter spectra from normal and neoplastic breast tissues were measured. Black-Right-Pointing-Pointer Shape (FWHM) of Compton peak was related with elemental composition and characteristics of each tissue type. Black-Right-Pointing-Pointer A statistical hypothesis test showed clear differences between normal and neoplastic breast tissues. Black-Right-Pointing-Pointer There is a strong correlation between experimental values of FWHM and effective atomic number. Black-Right-Pointing-Pointer Shape (FWHM) of Compton peak can be used to provide information about elemental composition of the tissues.

  3. Surface and bulk composition of YBa 2Cu 3O 6+x compounds studied by XPS

    Science.gov (United States)

    Andersson, S. Lars T.; Otamiri, Jonathan C.

    1990-08-01

    YBa 2Cu 3O 6+ x compounds prepared by a formic acid route where characterized by XPS. The samples were investigated both after scraping in air and in vacuum to reveal the surface composition after partial degradation during short time air exposure and to gather data on the pure bulk state. The surface layer is characterized by the XPS data of O 1s = 530.8-531.5 eV, Y3d 5/2 = 157.5 eV, Ba3d 5/2 = 779.9 eV , Ba4d 5/2 = 89.4 eV and Cu2p 3/2 = 934.4 eV with a strong satellite structure at 942.5 eV. The data indicate the presence of barium hydroxide and carbonate, copper(II) oxide, the green phase and some yttrium compound. The bulk state is characterized by XPS data of O 1 s = 528.8 eV, Y3d 5/2 = 156.2 eV , Ba3d 5/2 = 778.6 eV , Ba4d 5/2 = 88.3 eV and Cu2p 3/2 = 932.6 eV without a satellite and a similar copper state as for the surface layer. There exist single states of yttrium and barium in the bulk, both copper(I) and copper(II) valence states and for oxygen possibly several components closely spaced accounting for the structurally different oxide ions.

  4. Electrospun Nanofiber Scaffolds and Their Hydrogel Composites for the Engineering and Regeneration of Soft Tissues.

    Science.gov (United States)

    Manoukian, Ohan S; Matta, Rita; Letendre, Justin; Collins, Paige; Mazzocca, Augustus D; Kumbar, Sangamesh G

    2017-01-01

    Electrospinning has emerged as a simple, elegant, and scalable technique that can be used to fabricate polymeric nanofibers. Pure polymers as well as blends and composites of both natural and synthetic ones have been successfully electrospun into nanofiber matrices for many biomedical applications. Tissue-engineered medical implants, such as polymeric nanofiber scaffolds, are potential alternatives to autografts and allografts, which are short in supply and carry risks of disease transmission. These scaffolds have been used to engineer various soft tissues, including connective tissues, such as skin, ligament, and tendon, as well as nonconnective ones, such as vascular, muscle, and neural tissue. Electrospun nanofiber matrices show morphological similarities to the natural extracellular matrix (ECM), characterized by ultrafine continuous fibers, high surface-to-volume ratios, high porosities, and variable pore-size distributions. The physiochemical properties of nanofiber matrices can be controlled by manipulating electrospinning parameters so that they meet the requirements of a specific application.Nanostructured implants show improved biological performance over bulk materials in aspects of cellular infiltration and in vivo integration, taking advantage of unique quantum, physical, and atomic properties. Furthermore, the topographies of such scaffolds has been shown to dictate cellular attachment, migration, proliferation, and differentiation, which are critical in engineering complex functional tissues with improved biocompatibility and functional performance. This chapter discusses the use of the electrospinning technique in the fabrication of polymer nanofiber scaffolds utilized for the regeneration of soft tissues. Selected scaffolds will be seeded with human mesenchymal stem cells (hMSCs), imaged using scanning electron and confocal microscopy, and then evaluated for their mechanical properties as well as their abilities to promote cell adhesion

  5. Engineering of Corneal Tissue through an Aligned PVA/Collagen Composite Nanofibrous Electrospun Scaffold.

    Science.gov (United States)

    Wu, Zhengjie; Kong, Bin; Liu, Rui; Sun, Wei; Mi, Shengli

    2018-02-24

    Corneal diseases are the main reason of vision loss globally. Constructing a corneal equivalent which has a similar strength and transparency with the native cornea, seems to be a feasible way to solve the shortage of donated cornea. Electrospun collagen scaffolds are often fabricated and used as a tissue-engineered cornea, but the main drawback of poor mechanical properties make it unable to meet the requirement for surgery suture, which limits its clinical applications to a large extent. Aligned polyvinyl acetate (PVA)/collagen (PVA-COL) scaffolds were electrospun by mixing collagen and PVA to reinforce the mechanical strength of the collagen electrospun scaffold. Human keratocytes (HKs) and human corneal epithelial cells (HCECs) inoculated on aligned and random PVA-COL electrospun scaffolds adhered and proliferated well, and the aligned nanofibers induced orderly HK growth, indicating that the designed PVA-COL composite nanofibrous electrospun scaffold is suitable for application in tissue-engineered cornea.

  6. Dietary fat composition influences tissue lipid profile and gene expression in Fischer-344 rats.

    Science.gov (United States)

    Zhou, Albert L; Hintze, Korry J; Jimenez-Flores, Rafael; Ward, Robert E

    2012-12-01

    The AIN-76A diet causes fatty liver in rodents when fed for long periods of time. The aim of this study was to utilize fatty acid analysis and transcriptomics to investigate the effects of different fat sources in the AIN-76A diet on tissue lipid profiles and gene expression in male, weanling Fischer-344 rats. Animals were fed isocaloric diets that differed only in the fat source: (1) corn oil (CO) (2) anhydrous milk fat (AMF), and (3) AMF supplemented with 10% phospholipids from the milk fat globule membrane (AMF-MFGM). There were no differences in food intake, body weight, growth rate, or body fat composition among the groups, and the fatty acid compositions of red blood cells (RBC), plasma, muscle, and visceral adipose tissues reflected the dietary fat sources. Modifying the fat source resulted in 293 genes differentially regulated in skeletal muscle, 1,124 in adipose, and 831 in liver as determined by analysis of variance (ANOVA). Although tissue fatty acid profiles mostly reflected the diet, there were several quantitative differences in lipid classes in the liver and plasma. The AMF diet resulted in the highest level of hepatic triacylglycerols, but the lowest level in plasma. The CO diet resulted in significant accumulation of hepatic unesterified fatty acids and decreased DGAT expression and activity, a potential trigger for steatohepatitis. These results indicate that the fatty acid composition and presence of polar lipids in the AIN-76A diets have significant effects on lipid partitioning, gene expression, and potentially the development of liver pathology.

  7. Changes in arm tissue composition with slowly progressive weight-lifting among women with breast cancer-related lymphedema.

    Science.gov (United States)

    Zhang, Xiaochen; Brown, Justin C; Paskett, Electra D; Zemel, Babette S; Cheville, Andrea L; Schmitz, Kathryn H

    2017-07-01

    Studies in breast cancer-related lymphedema (BRCL) have exclusively examined total arm volume, but not the specific tissue composition that contributes to total volume. We evaluated baseline differences in arm tissue composition [fat mass, lean mass, bone mineral content (BMC), and bone mineral density (BMD)] between the affected and unaffected arms in women with BRCL. We compared changes in arm tissue composition and self-reported lymphedema symptoms after 1 year of weight-lifting versus control. We utilized data from physical activity and lymphedema trial that included 141 women with BRCL. Arm tissue composition was quantified using dual-energy X-ray absorptiometry. The severity of lymphedema was quantified using self-report survey. Weight-lifting was performed at community fitness facilities. At baseline, the affected arm had more fat (∆ = 89.7 g; P arm. After 12 months of weight-lifting, composition of the affected arm was improved: lean mass (71.2 g; P = 0.01) and BMD (14.0 mg/cm 2 ; P = 0.02) increased, arm fat percentage decreased (-1.5%; P = 0.003). Composition of the unaffected arm was only improved in lean mass (65.2 g; P = 0·04). Increases in lean mass were associated with less severe BCRL symptoms. Among women with BRCL, slowly progressive weight-lifting could improve arm tissue composition. Changes in arm tissue composition predict changes in symptom burden. Investigating the combined effects of exercise and weight loss on arm tissue composition and BCRL symptoms may provide additional insight into the benefits of lifestyle modification on lymphedema biology.

  8. Measurement of breast tissue composition with dual energy cone-beam computed tomography: A postmortem study

    Energy Technology Data Exchange (ETDEWEB)

    Ding Huanjun; Ducote, Justin L.; Molloi, Sabee [Department of Radiological Sciences, University of California, Irvine, California 92697 (United States)

    2013-06-15

    Purpose: To investigate the feasibility of a three-material compositional measurement of water, lipid, and protein content of breast tissue with dual kVp cone-beam computed tomography (CT) for diagnostic purposes. Methods: Simulations were performed on a flat panel-based computed tomography system with a dual kVp technique in order to guide the selection of experimental acquisition parameters. The expected errors induced by using the proposed calibration materials were also estimated by simulation. Twenty pairs of postmortem breast samples were imaged with a flat-panel based dual kVp cone-beam CT system, followed by image-based material decomposition using calibration data obtained from a three-material phantom consisting of water, vegetable oil, and polyoxymethylene plastic. The tissue samples were then chemically decomposed into their respective water, lipid, and protein contents after imaging to allow direct comparison with data from dual energy decomposition. Results: Guided by results from simulation, the beam energies for the dual kVp cone-beam CT system were selected to be 50 and 120 kVp with the mean glandular dose divided equally between each exposure. The simulation also suggested that the use of polyoxymethylene as the calibration material for the measurement of pure protein may introduce an error of -11.0%. However, the tissue decomposition experiments, which employed a calibration phantom made out of water, oil, and polyoxymethylene, exhibited strong correlation with data from the chemical analysis. The average root-mean-square percentage error for water, lipid, and protein contents was 3.58% as compared with chemical analysis. Conclusions: The results of this study suggest that the water, lipid, and protein contents can be accurately measured using dual kVp cone-beam CT. The tissue compositional information may improve the sensitivity and specificity for breast cancer diagnosis.

  9. Three-dimensional chitosan-nanohydroxyapatite composite scaffolds for bone tissue engineering

    Science.gov (United States)

    Thein-Han, W. W.; Misra, R. D. K.

    2009-09-01

    We describe the structure of biodegradable chitosan-nanohydroxyapatite (nHA) composites scaffolds and their interaction with pre-osteoblasts for bone tissue engineering. The scaffolds were fabricated via freezing and lyophilization. The nanocomposite scaffolds were characterized by a highly porous structure and pore size of ˜50-125 μm, irrespective of nHA content. The observed significant enhancement in the biological response of pre-osteoblast on nanocomposite scaffolds expressed in terms of cell attachment, proliferation, and widespread morphology in relation to pure chitosan points toward their potential use as scaffold material for bone regeneration.

  10. Tissue viscoelasticity is related to tissue composition but may not fully predict the apparent-level viscoelasticity in human trabecular bone - An experimental and finite element study.

    Science.gov (United States)

    Ojanen, X; Tanska, P; Malo, M K H; Isaksson, H; Väänänen, S P; Koistinen, A P; Grassi, L; Magnusson, S P; Ribel-Madsen, S M; Korhonen, R K; Jurvelin, J S; Töyräs, J

    2017-12-08

    Trabecular bone is viscoelastic under dynamic loading. However, it is unclear how tissue viscoelasticity controls viscoelasticity at the apparent-level. In this study, viscoelasticity of cylindrical human trabecular bone samples (n=11, male, age 18-78 years) from 11 proximal femurs were characterized using dynamic and stress-relaxation testing at the apparent-level and with creep nanoindentation at the tissue-level. In addition, bone tissue elasticity was determined using scanning acoustic microscope (SAM). Tissue composition and collagen crosslinks were assessed using Raman micro-spectroscopy and high performance liquid chromatography (HPLC), respectively. Values of material parameters were obtained from finite element (FE) models by optimizing tissue-level creep and apparent-level stress-relaxation to experimental nanoindentation and unconfined compression testing values, respectively, utilizing the second order Prony series to depict viscoelasticity. FE simulations showed that tissue-level equilibrium elastic modulus (E eq ) increased with increasing crystallinity (r=0.730, p=.011) while at the apparent-level it increased with increasing hydroxylysyl pyridinoline content (r=0.718, p=.019). In addition, the normalized shear modulus g 1 (r=-0.780, p=.005) decreased with increasing collagen ratio (amide III/CH 2 ) at the tissue-level, but increased (r=0.696, p=.025) with increasing collagen ratio at the apparent-level. No significant relations were found between the measured or simulated viscoelastic parameters at the tissue- and apparent-levels nor were the parameters related to tissue elasticity determined with SAM. However, only E eq , g 2 and relaxation time τ 1 from simulated viscoelastic values were statistically different between tissue- and apparent-levels (pviscoelasticity is affected by tissue composition but may not fully predict the macroscale viscoelasticity in human trabecular bone. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Data on coffee composition and mass spectrometry analysis of mixtures of coffee related carbohydrates, phenolic compounds and peptides.

    Science.gov (United States)

    Moreira, Ana S P; Nunes, Fernando M; Simões, Cristiana; Maciel, Elisabete; Domingues, Pedro; Domingues, M Rosário M; Coimbra, Manuel A

    2017-08-01

    The data presented here are related to the research paper entitled "Transglycosylation reactions, a main mechanism of phenolics incorporation in coffee melanoidins: inhibition by Maillard reaction" (Moreira et al., 2017) [1]. Methanolysis was applied in coffee fractions to quantify glycosidically-linked phenolics in melanoidins. Moreover, model mixtures mimicking coffee beans composition were roasted and analyzed using mass spectrometry-based approaches to disclose the regulatory role of proteins in transglycosylation reactions extension. This article reports the detailed chemical composition of coffee beans and derived fractions. In addition, it provides gas chromatography-mass spectrometry (GC-MS) chromatograms and respective GC-MS spectra of silylated methanolysis products obtained from phenolic compounds standards, as well as the detailed identification of all compounds observed by electrospray mass spectrometry (ESI-MS) analysis of roasted model mixtures, paving the way for the identification of the same type of compounds in other samples.

  12. Data on coffee composition and mass spectrometry analysis of mixtures of coffee related carbohydrates, phenolic compounds and peptides

    Directory of Open Access Journals (Sweden)

    Ana S.P. Moreira

    2017-08-01

    Full Text Available The data presented here are related to the research paper entitled “Transglycosylation reactions, a main mechanism of phenolics incorporation in coffee melanoidins: inhibition by Maillard reaction” (Moreira et al., 2017 [1]. Methanolysis was applied in coffee fractions to quantify glycosidically-linked phenolics in melanoidins. Moreover, model mixtures mimicking coffee beans composition were roasted and analyzed using mass spectrometry-based approaches to disclose the regulatory role of proteins in transglycosylation reactions extension. This article reports the detailed chemical composition of coffee beans and derived fractions. In addition, it provides gas chromatography–mass spectrometry (GC–MS chromatograms and respective GC–MS spectra of silylated methanolysis products obtained from phenolic compounds standards, as well as the detailed identification of all compounds observed by electrospray mass spectrometry (ESI-MS analysis of roasted model mixtures, paving the way for the identification of the same type of compounds in other samples.

  13. Biodegradable nanofibers-reinforced microfibrous composite scaffolds for bone tissue engineering.

    Science.gov (United States)

    Martins, Albino; Pinho, Elisabete D; Correlo, Vítor M; Faria, Susana; Marques, Alexandra P; Reis, Rui L; Neves, Nuno M

    2010-12-01

    Native bone extracellular matrix (ECM) is a complex hierarchical fibrous composite structure, resulting from the assembling of collagen fibrils at several length scales, ranging from the macro to the nanoscale. The combination of nanofibers within microfibers after conventional reinforcement methodologies seems to be a feasible solution to the rational design of highly functional synthetic ECM substitutes. The present work aims at the development of bone ECM inspired structures, conjugating electrospun chitosan (Cht) nanofibers within biodegradable polymeric microfibers [poly(butylene succinate)-PBS and PBS/Cht], assembled in a fiber mesh structure. The nanofibers-reinforced composite fiber mesh scaffolds were seeded with human bone marrow mesenchymal stem cells (hBMSCs) and cultured under osteogenic differentiation conditions. These nanofibers-reinforced composite scaffolds sustained ECM deposition and mineralization, mainly in the PBS/Cht-based fiber meshes, as depicted by the increased amount of calcium phosphates produced by the osteogenic differentiated hBMSCs. The osteogenic genotype of the cultured hBMSCs was confirmed by the expression of osteoblastic genes, namely Alkaline Phosphatase, Osteopontin, Bone Sialoprotein and Osteocalcin, and the transcription factors Runx2 and Osterix, all involved in different stages of the osteogenesis. These data represent the first report on the biological functionality of nanofibers-reinforced composite scaffolds, envisaging the applicability of the developed structures for bone tissue engineering.

  14. Chemometric compositional analysis of phenolic compounds in fermenting samples and wines using different infrared spectroscopy techniques.

    Science.gov (United States)

    Aleixandre-Tudo, Jose Luis; Nieuwoudt, Helene; Aleixandre, Jose Luis; du Toit, Wessel

    2018-01-01

    The wine industry requires reliable methods for the quantification of phenolic compounds during the winemaking process. Infrared spectroscopy appears as a suitable technique for process control and monitoring. The ability of Fourier transform near infrared (FT-NIR), attenuated total reflectance mid infrared (ATR-MIR) and Fourier transform infrared (FT-IR) spectroscopies to predict compositional phenolic levels during red wine fermentation and aging was investigated. Prediction models containing a large number of samples collected over two vintages from several industrial fermenting tanks as well as wine samples covering a varying number of vintages were validated. FT-NIR appeared as the most accurate technique to predict the phenolic content. Although slightly less accurate models were observed, ATR-MIR and FT-IR can also be used for the prediction of the majority of phenolic measurements. Additionally, the slope and intercept test indicated a systematic error for the three spectroscopies which seems to be slightly more pronounced for HPLC generated phenolics data than for the spectrophotometric parameters. However, the results also showed that the predictions made with the three instruments are statistically comparable. The robustness of the prediction models was also investigated and discussed. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. Differential effects of diet composition and timing of feeding behavior on rat brown adipose tissue and skeletal muscle peripheral clocks.

    NARCIS (Netherlands)

    De Goede, P.; Sen, Satish; Oosterman, Johanneke E; Kalsbeek, A.

    2018-01-01

    The effects of feeding behavior and diet composition,as well as their possible interactions,on daily (clock) gene expression rhythms have mainly been studied in the liver, and to a lesser degree in white adipose tissue(WAT), but hardly in other metabolic tissues such as skeletal muscle (SM) and

  16. A novel amperometric biosensor based on banana peel (Musa cavendish) tissue homogenate for determination of phenolic compounds.

    Science.gov (United States)

    Ozcan, Hakki Mevlut; Sagiroglu, Ayten

    2010-08-01

    In this study the biosensor was constructed by immobilizing tissue homogenate of banana peel onto a glassy carbon electrode surface. Effects of immobilization materials amounts, effects of pH, buffer concentration and temperature on biosensor response were studied. In addition, the detection ranges of 13 phenolic compounds were obtained with the help of the calibration graphs. Storage stability, repeatability of the biosensor, inhibitory effect and sample applications were also investigated. A typical calibration curve for the sensor revealed a linear range of 10-80 microM catechol. In reproducibility studies, variation coefficient and standard deviation were calculated as 2.69%, 1.44 x 10(-3) microM, respectively.

  17. The relative composition of the inflammatory infiltrate as an additional tool for synovial tissue classification.

    Directory of Open Access Journals (Sweden)

    Cristina Della Beffa

    Full Text Available OBJECTIVES: Traditionally, differences in absolute numbers of cells expressing a certain marker (e.g., positive staining cells per mm² have been used in immunohistological synovial tissue classification. We have begun to evaluate the relative composition of the inflammatory infiltrates, i.e. percentages of inflammatory cell types in inflammatory infiltrates, as an alternate classification tool that may potentially improve tissue diagnostics, subgrouping in clinical trials, and understanding of pathogenesis of inflammatory and noninflammatory arthropathies. METHODS: Synovial tissue specimens (normal synovium, n=15; orthopedic arthropathies, n=6; osteoarthritis, n=26; early undifferentiated arthritis, n=10; rheumatoid arthritis, n=26; chronic septic arthritis, n=11 were stained for CD15, CD68, CD3, CD20, and CD38. Densities of cells expressing a given marker were determined in the superficial subintima. Binary and multicategory receiver operating characteristic (ROC analysis and naïve Bayes classifier were used to compare the abilities of (1 the absolute densities of cells expressing a given marker (absolute method with (2 the percentages of these cells in the inflammatory cell population (relative method to differentiate among the six tissue classes. RESULTS: The inflammatory infiltrates in normal synovium and the orthopedic arthropathies consisted almost exclusively of CD68+ and CD3+ cells. Notable fractions of CD20+ and CD38+ cells appeared in a subset of osteoarthritis samples, and increased further in early, rheumatoid and chronic septic arthritis. ROC analyses and naïve Bayes classifier ranked the absolute method above the relative method in terms of overall discriminatory ability. The relative method became slightly superior when the samples were also stratified according to the total number of inflammatory cells/mm². CONCLUSIONS: This exploratory investigation featuring a variety of joint disorders revealed that measuring the relative

  18. In vitro evaluation of hydroxyapatite-chitosan-gelatin composite membrane in guided tissue regeneration.

    Science.gov (United States)

    Hunter, Kimberly T; Ma, Teng

    2013-04-01

    Resorbable biomaterials have been investigated as barrier membranes to compartmentalize the periodontal defects while selectively guiding osteoprogenitor cell proliferation and bone tissue expansion. Hydroxyapatite (H), chitosan (C), and gelatin (G) have chemical similarity to the structural components of natural bone and their composites have been tested as bone scaffolds. Human mesenchymal stem or stromal cells (hMSCs) are inducible osteoprogenitors and are responsible for bone tissue repair and regeneration. In this study, the dynamic interactions of hMSC with composite hydroxyapatite-chitosan-gelatin (HCG) membranes were investigated. The association of HCG formed a biodegradable membrane with ~60 wt % water and an initial stiffness of ~20 kPa. Preconditioning in serum-containing media resulted in the formation nanopores in the HCG membranes and the increase of extracellular matrix (ECM) protein adsorption. Expression of integrin α(2)β(1) and α(5)β(1) coincided with ECM enrichment, suggesting the enhanced cell-ECM interactions. The elevated expression of bone marker proteins and genes in the HCG membranes suggests the progression of hMSC osteogenic differentiation in the absence of chemical induction. The results showed that the HCG membranes possess sufficient mechanical and structural properties to function as a barrier membrane, and that the adsorbed ECM proteins effectively functionalized the HCG membranes and promoted hMSC osteogenic differentiation. Copyright © 2012 Wiley Periodicals, Inc.

  19. In vitro aging of mineralized collagen-based composite as guided tissue regeneration membrane

    International Nuclear Information System (INIS)

    Pan, S.X.; Li, Y.; Feng, H.L.; Bai, W.; Gu, Y.Y.

    2006-01-01

    The technique of guided tissue regeneration (GTR) has been developed for the regeneration of periodontal tissues, bone around natural teeth and dental implants. The aim of this study is to investigate the biodegradability and mechanic behavior of a novel mineralized nano-hydroxyapatite/collagen/poly (lactic acid) (nHAC/PLA) composite as GTR membrane in vitro. The elastic modulus and maximum tensile strength of GTR film samples with different nHAC/PLA ratio were measured to get an optimal nHAC/PLA ratio. Thermogravimetric analysis was conducted to evaluate the change of the inorganic component in the samples during the process of in vitro aging. Morphology of samples was checked by using scanning electron microscopy. On the basis of the above results, it can be concluded that the GTR membranes maintained integrity and the original appearance throughout the 1-month in vitro aging. There is an active dissolution and deposition process of crystals which is propitious to the bone formation on the surface of the composite membrane. The optimal nHAC/PLA ratio of the novel membrane is 0.4:1. For a longer period of bone repair, PLA with higher molecular weight should be chosen as the scaffold for the GTR membrane

  20. Common factors method to predict the carcass composition tissue in kid goats

    Directory of Open Access Journals (Sweden)

    Helen Fernanda Barros Gomes

    2013-03-01

    Full Text Available The objective of this work was to analyze the interrelations among weights and carcass measures of the longissimus lumborum muscle thickness and area, and of sternum tissue thickness, measured directly on carcass and by ultrasound scan. Measures were taken on live animals and after slaughter to develop models of multiple linear regression, to estimate the composition of shoulder blade, from selected variables in 89 kids of both genders and five breed groups, raised in feedlot system. The variables considered relevant and not redundant on the information they carry, for the common factor analysis, were used in the carcass composition estimate development models. The presuppositions of linear regression models relative to residues were evaluated, the estimated residues were subjected to analysis of variance and the means were compared by the Student t test. Based in these results, the group of 32 initial variables could be reduced to four variables: hot carcass weight, rump perimeter, leg length and tissue height at the fourth sternum bone. The analysis of common factors was shown as an effective technique to study the interrelations among the independent variables. The measures of carcass dimension, alone, did not add any information to hot carcass weight. The carcass muscle weight can be estimated with high precision from simple models, without the need for information related to gender and breed, and they could be built based on carcass weight, which makes it easy to be applied. The fat and bones estimate models were not as accurate.

  1. Elemental composition of 'normal' and Alzheimer brain tissue by INA and PIXE analyses

    International Nuclear Information System (INIS)

    Stedman, J.D.; Spyrou, N.M.

    1997-01-01

    Instrumental methods based on the nuclear and atomic properties of the elements have been used for many years to determine elemental concentrations in a variety of materials for biomedical, industrial and environmental applications. These methods offer high sensitivity for accurate trace element measurements, suffer few interfering or competing effects. Present no blank problems and are convenient for both research and routine analyses. The present article describes the use of two trace element techniques. Firstly the use of activation of stable nuclei irradiated by neutrons in the core of a low power research reactor as a means of detection of elements through the resulting gamma-rays emitted. Secondly, the observations of the interactions of energetic ion beams with the material in order to identify elemental species. Over recent years there has been some interest in determining the elemental composition of 'normal' and Alzheimer affected brain tissue, however literature findings are inconsistent. Possible reasons for discrepancies need to be identified for further progress to be made. Here, post-mortem tissue samples, provided by the Alzheimer's Disease Brain Bank, Institute of Psychiatry, London, were taken from the frontal, occipital, parietal and temporal lobes of both hemispheres of brains from 13 'normal' and 19 Alzheimer subjects. The elemental composition of the samples was determined using the analytical techniques of INAA (instrumental neutron activation analysis), RBS (Rutherford back-scattering) and PIXE (particle induced x-ray emission). The principal findings are summarised here. (author)

  2. Biological evaluation of porous aliphatic polyurethane/hydroxyapatite composite scaffolds for bone tissue engineering.

    Science.gov (United States)

    Yang, Wanxun; Both, Sanne K; Zuo, Yi; Birgani, Zeinab Tahmasebi; Habibovic, Pamela; Li, Yubao; Jansen, John A; Yang, Fang

    2015-07-01

    Biomaterial scaffolds meant to function as supporting structures to osteogenic cells play a pivotal role in bone tissue engineering. Recently, we synthesized an aliphatic polyurethane (PU) scaffold via a foaming method using non-toxic components. Through this procedure a uniform interconnected porous structure was created. Furthermore, hydroxyapatite (HA) particles were introduced into this process to increase the bioactivity of the PU matrix. To evaluate the biological performances of these PU-based scaffolds, their influence on in vitro cellular behavior and in vivo bone forming capacity of the engineered cell-scaffold constructs was investigated in this study. A simulated body fluid test demonstrated that the incorporation of 40 wt % HA particles significantly promoted the biomineralization ability of the PU scaffolds. Enhanced in vitro proliferation and osteogenic differentiation of the seeded mesenchymal stem cells were also observed on the PU/HA composite. Next, the cell-scaffold constructs were implanted subcutaneously in a nude mice model. After 8 weeks, a considerable amount of vascularized bone tissue with initial marrow stroma development was generated in both PU and PU/HA40 scaffold. In conclusion, the PU/HA composite is a potential scaffold for bone regeneration applications. © 2014 Wiley Periodicals, Inc.

  3. Studies of Hard and Soft Tissue Elemental Compositions in Mice and Rats Subjected to Simulated Microgravity

    Science.gov (United States)

    Mehta, Rahul; Lane, Ryan A.; Fitch, Hannah M.; Ali, Nawab; Soulsby, Michael; Chowdhury, Parimal

    2009-03-01

    Microgravity has profound effects on skeletal as well as other body systems. To investigate the effect of microgravity, we have used a NASA validated Hind-limb suspension (HLS) animal model of simulated weightlessness. Groups of mice and rats were subjected to hind limb suspension between 1 and 14 days while the control groups were maintained without suspension for the same duration. To study the effect of diet, some groups of animals were fed on a special diet with defined composition. At term, the animals were sacrificed and the tibia, femur, and skull bones were collected. In addition, soft tissues from pancreas and muscles were also collected. All of the bones and tissues samples were analyzed for elemental analysis using Energy Dispersive Spectroscopy (EDS) equipped on a Scanning Electron Microscope (SEM). In the EDS, 10-20 keV electrons bombarded the samples and a Si (Li) detector measured K-, L- and M-shell x-rays. Independently, X-Ray Fluorescence (XRF) provided the data for comparison and normalization. Flame software, with Fuzzy Logic, was used to form elemental ratios. Elemental analysis of bone samples indicated a variation in the compositional ratios of calcium, potassium, oxygen and carbon in the leg bones and skulls of the HLS versus control specimens. These variations showed dependence on sample position in the bone.

  4. Quantitative Susceptibility Mapping of Human Brain Reflects Spatial Variation in Tissue Composition

    Science.gov (United States)

    Li, Wei; Wu, Bing; Liu, Chunlei

    2011-01-01

    Image phase from gradient echo MRI provides a unique contrast that reflects brain tissue composition variations, such as iron and myelin distribution. Phase imaging is emerging as a powerful tool for the investigation of functional brain anatomy and disease diagnosis. However, the quantitative value of phase is compromised by its nonlocal and orientation dependent properties. There is an increasing need for reliable quantification of magnetic susceptibility, the intrinsic property of tissue. In this study, we developed a novel and accurate susceptibility mapping method that is also phase-wrap insensitive. The proposed susceptibility mapping method utilized two complementary equations: (1) the Fourier relationship of phase and magnetic susceptibility; and (2) the first-order partial derivative of the first equation in the spatial frequency domain. In numerical simulation, this method reconstructed the susceptibility map almost free of streaking artifact. Further, the iterative implementation of this method allowed for high quality reconstruction of susceptibility maps of human brain in vivo. The reconstructed susceptibility map provided excellent contrast of iron-rich deep nuclei and white matter bundles from surrounding tissues. Further, it also revealed anisotropic magnetic susceptibility in brain white matter. Hence, the proposed susceptibility mapping method may provide a powerful tool for the study of brain physiology and pathophysiology. Further elucidation of anisotropic magnetic susceptibility in vivo may allow us to gain more insight into the white matter microarchitectures. PMID:21224002

  5. 3D-Printing Composite Polycaprolactone-Decellularized Bone Matrix Scaffolds for Bone Tissue Engineering Applications.

    Science.gov (United States)

    Rindone, Alexandra N; Nyberg, Ethan; Grayson, Warren L

    2017-05-11

    Millions of patients worldwide require bone grafts for treatment of large, critically sized bone defects from conditions such as trauma, cancer, and congenital defects. Tissue engineered (TE) bone grafts have the potential to provide a more effective treatment than current bone grafts since they would restore fully functional bone tissue in large defects. Most bone TE approaches involve a combination of stem cells with porous, biodegradable scaffolds that provide mechanical support and degrade gradually as bone tissue is regenerated by stem cells. 3D-printing is a key technique in bone TE that can be used to fabricate functionalized scaffolds with patient-specific geometry. Using 3D-printing, composite polycaprolactone (PCL) and decellularized bone matrix (DCB) scaffolds can be produced to have the desired mechanical properties, geometry, and osteoinductivity needed for a TE bone graft. This book chapter will describe the protocols for fabricating and characterizing 3D-printed PCL:DCB scaffolds. Moreover, procedures for culturing adipose-derived stem cells (ASCs) in these scaffolds in vitro will be described to demonstrate the osteoinductivity of the scaffolds.

  6. Compositions of phenolic compounds, amino acids and reducing sugars in commercial potato varieties and their effects on acrylamide formation.

    Science.gov (United States)

    Zhu, Fan; Cai, Yi-Zhong; Ke, Jinxia; Corke, Harold

    2010-10-01

    Potato is consumed as an important source of carbohydrate and other nutrients as well as a good source of phenolics. Acrylamide is a potential carcinogen formed during frying of potato products. This study investigated the compositions of phenolic compounds, amino acids and reducing sugars in 16 commercial potato varieties from eight countries and analysed the relationships between these compositions and the levels of acrylamide generated by heating (185 °C, 25 min) potato powders. Major phenolic compounds in the tested potato varieties were identified as hydroxycinnamoylquinic/hydroxycinnamoyl derivatives by liquid chromatography/mass spectrometry. Great variations in the contents of phenolic compounds, free reducing sugars and amino acids as well as wide variations in acrylamide concentration were found among the different potato varieties. Correlation analysis revealed that fructose (r = 0.956***), glucose (r = 0.826***) and asparagine (r = 0.842***) were positively correlated with acrylamide formation. Interestingly, it was observed that higher levels of phenolic compounds were related to lower levels of acrylamide (r = - 0.692*). Careful selection of potato varieties with lower levels of fructose, glucose and asparagine and higher levels of phenolic compounds may mitigate acrylamide formation during thermal processing of potato products. Copyright © 2010 Society of Chemical Industry.

  7. Viscoelastic behaviour of hydrogel-based composites for tissue engineering under mechanical load.

    Science.gov (United States)

    Kocen, Rok; Gasik, Michael; Gantar, Ana; Novak, Saša

    2017-03-06

    Along with biocompatibility, bioinductivity and appropriate biodegradation, mechanical properties are also of crucial importance for tissue engineering scaffolds. Hydrogels, such as gellan gum (GG), are usually soft materials, which may benefit from the incorporation of inorganic particles, e.g. bioactive glass, not only due to the acquired bioactivity, but also due to improved mechanical properties. They exhibit complex viscoelastic properties, which can be evaluated in various ways. In this work, to reliably evaluate the effect of the bioactive glass (BAG) addition on viscoelastic properties of the composite hydrogel, we employed and compared the three most commonly used techniques, analyzing their advantages and limitations: monotonic uniaxial unconfined compression, small amplitude oscillatory shear (SAOS) rheology and dynamic mechanical analysis (DMA). Creep and small amplitude dynamic strain-controlled tests in DMA are suggested as the best ways for the characterization of mechanical properties of hydrogel composites, whereas the SAOS rheology is more useful for studying the hydrogel's processing kinetics, as it does not induce volumetric changes even at very high strains. Overall, the results confirmed a beneficial effect of BAG (nano)particles on the elastic modulus of the GG-BAG composite hydrogel. The Young's modulus of 6.6 ± 0.8 kPa for the GG hydrogel increased by two orders of magnitude after the addition of 2 wt.% BAG particles (500-800 kPa).

  8. Influence of plant root morphology and tissue composition on phenanthrene uptake: Stepwise multiple linear regression analysis

    International Nuclear Information System (INIS)

    Zhan, Xinhua; Liang, Xiao; Xu, Guohua; Zhou, Lixiang

    2013-01-01

    Polycyclic aromatic hydrocarbons (PAHs) are contaminants that reside mainly in surface soils. Dietary intake of plant-based foods can make a major contribution to total PAH exposure. Little information is available on the relationship between root morphology and plant uptake of PAHs. An understanding of plant root morphologic and compositional factors that affect root uptake of contaminants is important and can inform both agricultural (chemical contamination of crops) and engineering (phytoremediation) applications. Five crop plant species are grown hydroponically in solutions containing the PAH phenanthrene. Measurements are taken for 1) phenanthrene uptake, 2) root morphology – specific surface area, volume, surface area, tip number and total root length and 3) root tissue composition – water, lipid, protein and carbohydrate content. These factors are compared through Pearson's correlation and multiple linear regression analysis. The major factors which promote phenanthrene uptake are specific surface area and lipid content. -- Highlights: •There is no correlation between phenanthrene uptake and total root length, and water. •Specific surface area and lipid are the most crucial factors for phenanthrene uptake. •The contribution of specific surface area is greater than that of lipid. -- The contribution of specific surface area is greater than that of lipid in the two most important root morphological and compositional factors affecting phenanthrene uptake

  9. Effects of Anthocyanin and Flavanol Compounds on Lipid Metabolism and Adipose Tissue Associated Systemic Inflammation in Diet-Induced Obesity

    Directory of Open Access Journals (Sweden)

    Roel A. van der Heijden

    2016-01-01

    Full Text Available Background. Naturally occurring substances from the flavanol and anthocyanin family of polyphenols have been proposed to exert beneficial effects in the course of obesity. We hypothesized that their effects on attenuating obesity-induced dyslipidemia as well as the associated inflammatory sequelae especially have health-promoting potential. Methods. Male C57BL/6J mice (n=52 received a control low-fat diet (LFD; 10 kcal% fat for 6 weeks followed by 24 weeks of either LFD (n=13 or high-fat diet (HFD; 45 kcal% fat; n=13 or HFD supplemented with 0.1% w/w of the flavanol compound epicatechin (HFD+E; n=13 or an anthocyanin-rich bilberry extract (HFD+B; n=13. Energy substrate utilization was determined by indirect calorimetry in a subset of mice following the dietary switch and at the end of the experiment. Blood samples were collected at baseline and at 3 days and 4, 12, and 20 weeks after dietary switch and analyzed for systemic lipids and proinflammatory cytokines. Adipose tissue (AT histopathology and inflammatory gene expression as well as hepatic lipid content were analyzed after sacrifice. Results. The switch from a LFD to a HFD lowered the respiratory exchange ratio and increased plasma cholesterol and hepatic lipid content. These changes were not attenuated by HFD+E or HFD+B. Furthermore, the polyphenol compounds could not prevent HFD-induced systemic rise of TNF-α levels. Interestingly, a significant reduction in Tnf gene expression in HFD+B mice was observed in the AT. Furthermore, HFD+B, but not HFD+E, significantly prevented the early upregulation of circulating neutrophil chemoattractant mKC. However, no differences in AT histopathology were observed between the HFD types. Conclusion. Supplementation of HFD with an anthocyanin-rich bilberry extract but not with the flavanol epicatechin may exert beneficial effects on the systemic early inflammatory response associated with diet-induced obesity. These systemic effects were transient

  10. Donor-recipient human leukocyte antigen matching practices in vascularized composite tissue allotransplantation: a survey of major transplantation centers.

    Science.gov (United States)

    Ashvetiya, Tamara; Mundinger, Gerhard S; Kukuruga, Debra; Bojovic, Branko; Christy, Michael R; Dorafshar, Amir H; Rodriguez, Eduardo D

    2014-07-01

    Vascularized composite tissue allotransplant recipients are often highly sensitized to human leukocyte antigens because of multiple prior blood transfusions and other reconstructive operations. The use of peripheral blood obtained from dead donors for crossmatching may be insufficient because of life support measures taken for the donor before donation. No study has been published investigating human leukocyte antigen matching practices in this field. A survey addressing human leukocyte antigen crossmatching methods was generated and sent to 22 vascularized composite tissue allotransplantation centers with active protocols worldwide. Results were compiled by center and compared using two-tailed t tests. Twenty of 22 centers (91 percent) responded to the survey. Peripheral blood was the most commonly reported donor sample for vascularized composite tissue allotransplant crossmatching [78 percent of centers (n=14)], with only 22 percent (n=4) using lymph nodes. However, 56 percent of the 18 centers (n=10) that had performed vascularized composite tissue allotransplantation reported that they harvested lymph nodes for crossmatching. Of responding individuals, 62.5 percent (10 of 16 individuals) felt that lymph nodes were the best donor sample for crossmatching. A slight majority of vascularized composite tissue allotransplant centers that have performed clinical transplants have used lymph nodes for human leukocyte antigen matching, and centers appear to be divided on the utility of lymph node harvest. The use of lymph nodes may offer a number of potential benefits. This study highlights the need for institutional review board-approved crossmatching protocols specific to vascularized composite tissue allotransplantation, and the need for global databases for sharing of vascularized composite tissue allotransplantation experiences.

  11. Comparison of fatty acid composition of subcutaneous, pericardial and epicardial adipose tissue and atrial tissue in patients with heart disease

    DEFF Research Database (Denmark)

    Eschen, Rikke Bülow; Gu, Jiwei; Andreasen, Jan Jesper

    OBJECTIVES The content in adipose tissue of marine n-3 polyunsaturated fatty acids (PUFAs) is a marker of long-term fish consumption and data suggest an antiarrhythmic effect of n-3 PUFAs. We investigated the correlation between adipose tissue content of the major n-3 PUFAs, eicosapentaenoic acid...... (EPA) and docosahexaenoic acid (DHA), from three different adipose tissue compartments [epicardial (EAT), pericardial (PAT) and subcutaneous (SAT)]. Furthermore, we studied the correlation between the content of EPA and DHA in these compartments and in atrial tissue (AT). METHODS We obtained AT from...

  12. Comparison of fatty acid composition of subcutaneous, pericardial and epicardial adipose tissue and atrial tissue in patients with heart disease

    DEFF Research Database (Denmark)

    Eschen, Rikke Bülow; Gu, Jiwei; Andreasen, Jan Jesper

    2016-01-01

    OBJECTIVES The content in adipose tissue of marine n-3 polyunsaturated fatty acids (PUFAs) is a marker of long-term fish consumption and data suggest an antiarrhythmic effect of n-3 PUFAs. We investigated the correlation between adipose tissue content of the major n-3 PUFAs, eicosapentaenoic acid...... (EPA) and docosahexaenoic acid (DHA), from three different adipose tissue compartments [epicardial (EAT), pericardial (PAT) and subcutaneous (SAT)]. Furthermore, we studied the correlation between the content of EPA and DHA in these compartments and in atrial tissue (AT). METHODS We obtained AT from...

  13. [The elemental composition of teeth hard tissues depending on the state of the environment].

    Science.gov (United States)

    Suladze, N; Shishniashvili, T; Margvelashvili, V; Kobakhidze, K

    2014-01-01

    At present, great attention is paid to the origin of man-made micro elemental anomalies. To monitor the state of the environment and its effects on the human body, of great importance is the determination of the amount and distribution of various chemical elements in the dentin and enamel of the teeth. To determine the essential (Ca, Zn, Mn, Ni), conditionally essential (Rb, Ni, Sr) and toxic (Pb, Hg) trace elements in the mineralized tissues of the teeth and to identify the relationship between the elemental composition of the tooth structure and the state of the general and dental health depending on the state of the environment, we have examined 29 children aged 3-4 years who have carried out analysis of hard tissue of teeth (teeth used for remote medical reasons) for the maintenance of nine chemical elements. Children living in a relatively environmentally favorable conditions essential value and conditionally essential elements in the mineralized tissues of the teeth were within normal limits, and toxic elements slightly increased limits that differ from those of children living in environmentally disadvantaged areas. In particular, these essential elements were significantly reduced (except for zinc), as indicators of toxic elements - mercury and lead, increased by 12.5% and 44.5%, respectively, which is clearly reflected on the state of dental health because noted decompensated form of tooth decay. Thus, deviations in a state of general and dental health of children associated with an imbalance of macro-and microelements in the mineralized tissues of the teeth.

  14. Effects of thermal maturation and thermochemical sulfate reduction on compound-specific sulfur isotopic compositions of organosulfur compounds in Phosphoria oils from the Bighorn Basin, USA

    Science.gov (United States)

    Ellis, Geoffrey S.; Said-Ahamed, Ward; Lillis, Paul G.; Shawar, Lubna; Amrani, Alon

    2017-01-01

    Compound-specific sulfur isotope analysis was applied to a suite of 18 crude oils generated from the Permian Phosphoria Formation in the Bighorn Basin, western USA. These oils were generated at various levels of thermal maturity and some experienced thermochemical sulfate reduction (TSR). This is the first study to examine the effects of thermal maturation on stable sulfur isotopic compositions of individual organosulfur compounds (OSCs) in crude oil. A general trend of 34S enrichment in all of the studied compounds with increasing thermal maturity was observed, with the δ34S values of alkyl-benzothiophenes (BTs) tending to be enriched in 34S relative to those of the alkyl-dibenzothiophenes (DBTs) in lower-maturity oils. As thermal maturity increases, δ34S values of both BTs and DBTs become progressively heavier, but the difference in the average δ34S value of the BTs and DBTs (Δ34S BT-DBT) decreases. Differences in the isotopic response to thermal stress exhibited by these two compound classes are considered to be the result of relative differences in their thermal stabilities. TSR-altered Bighorn Basin oils have OSCs that are generally enriched in 34S relative to non-TSR-altered oils, with the BTs being enriched in 34S relative to the DBTs, similar to the findings of previous studies. However, several oils that were previously interpreted to have been exposed to minor TSR have Δ34S BT-DBT values that do not support this interpretation. The δ34S values of the BTs and DBTs in some of these oils suggest that they did not experience TSR, but were derived from a more thermally mature source. The heaviest δ34S values observed in the OSCs are enriched in 34S by up to 10‰ relative to that of Permian anhydrite in the Bighorn Basin, suggesting that there may be an alternate or additional source of sulfate in some parts of the basin. These results indicate that the sulfur isotopic composition of OSCs in oil provides a sensitive indicator for the extent of TSR

  15. Composites of Ti-Al Intermetallic Compounds With a Ductile Ti Matrix, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Many properties of intermetallic compounds (IMC's) would make them strong candidates for vehicle structures, tankage, secondary structures, and appendages for NASA...

  16. Differential Pulse Voltammetric Determination of Selected Nitro-Compounds on Silver, Solid Silver Composite, and Solid Graphite Composite Electrodes

    Czech Academy of Sciences Publication Activity Database

    Navrátil, Tomáš; Barek, J.; Fašinová-Šebková, S.

    2009-01-01

    Roč. 21, 3-5 (2009), s. 309-315 ISSN 1040-0397 R&D Projects: GA ČR GA203/07/1195; GA AV ČR IAA400400806 Institutional research plan: CEZ:AV0Z40400503 Keywords : silver electrode * silver composite electrode * graphite composite electrode * differential pulse voltammetry Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 2.630, year: 2009

  17. A new test phantom with different breast tissue compositions for image quality assessment in conventional and digital mammography

    International Nuclear Information System (INIS)

    Pachoud, Marc; Lepori, D; Valley, Jean-Francois; Verdun, Francis R

    2004-01-01

    Our objective is to describe a new test phantom that permits the objective assessment of image quality in conventional and digital mammography for different types of breast tissue. A test phantom, designed to represent a compressed breast, was made from tissue equivalent materials. Three separate regions, with different breast tissue compositions, are used to evaluate low and high contrast resolution, spatial resolution and image noise. The phantom was imaged over a range of kV using a Contour 2000 (Bennett) mammography unit with a Kodak MinR 2190-MinR L screen-film combination and a Senograph 2000D (General Electric) digital mammography unit. Objective image quality assessments for different breast tissue compositions were performed using the phantom for conventional and digital mammography. For a similar mean glandular dose (MGD), the digital system gives a significantly higher contrast-to-noise ratio (CNR) than the screen-film system for 100% glandular tissue. In conclusion, in mammography, a range of exposure conditions is used for imaging because of the different breast tissue compositions encountered clinically. Ideally, the patient dose-image quality relationship should be optimized over the range of exposure conditions. The test phantom presented in this work permits image quality parameters to be evaluated objectively for three different types of breast tissue. Thus, it is a useful tool for optimizing the patient dose-image quality relationship

  18. The rapid manufacture of uniform composite multicellular-biomaterial micropellets, their assembly into macroscopic organized tissues, and potential applications in cartilage tissue engineering.

    Science.gov (United States)

    Babur, Betul Kul; Kabiri, Mahboubeh; Klein, Travis Jacob; Lott, William B; Doran, Michael Robert

    2015-01-01

    We and others have published on the rapid manufacture of micropellet tissues, typically formed from 100-500 cells each. The micropellet geometry enhances cellular biological properties, and in many cases the micropellets can subsequently be utilized as building blocks to assemble complex macrotissues. Generally, micropellets are formed from cells alone, however when replicating matrix-rich tissues such as cartilage it would be ideal if matrix or biomaterials supplements could be incorporated directly into the micropellet during the manufacturing process. Herein we describe a method to efficiently incorporate donor cartilage matrix into tissue engineered cartilage micropellets. We lyophilized bovine cartilage matrix, and then shattered it into microscopic pieces having average dimensions tissues. Generically, this is a versatile method that enables the rapid and uniform integration of biomaterials into multicellular micropellets that can then be used as tissue building blocks. In this study, the addition of CD resulted in an approximate 8-fold volume increase in the micropellets, with the donor matrix functioning to contribute to an increase in total cartilage matrix content. Composite micropellets were readily assembled into macroscopic cartilage tissues; the incorporation of CD enhanced tissue size and matrix content, but did not enhance chondrogenic gene expression.

  19. Characterization of wood plastic composites made from landfill-derived plastic and sawdust: volatile compounds and olfactometric analysis.

    Science.gov (United States)

    Félix, Juliana S; Domeño, Celia; Nerín, Cristina

    2013-03-01

    Application of wood plastic composites (WPCs) obtained from recycled materials initially intended for landfill is usually limited by their composition, mainly focused on release of volatile organic compounds (VOCs) which could affect quality or human safety. The study of the VOCs released by a material is a requirement for new composite materials. Characterization and quantification of VOCs of several WPC produced with low density polyethylene (LDPE) and polyethylene/ethylene vinyl acetate (PE/EVA) films and sawdust were carried out, in each stage of production, by solid phase microextraction in headspace mode (HS-SPME) and gas chromatography-mass spectrometry (GC-MS). An odor profile was also obtained by HS-SPME and GC-MS coupled with olfactometry analysis. More than 140 compounds were observed in the raw materials and WPC samples. Some quantified compounds were considered WPC markers such as furfural, 2-methoxyphenol, N-methylphthalimide and 2,4-di-tert-butylphenol. Hexanoic acid, acetic acid, 2-methoxyphenol, acetylfuran, diacetyl, and aldehydes were the most important odorants. None of the VOCs were found to affect human safety for use of the WPC. Copyright © 2012 Elsevier Ltd. All rights reserved.

  20. Composition of sulla (Hedysarum coronarium L.) honey solvent extractives determined by GC/MS: norisoprenoids and other volatile organic compounds.

    Science.gov (United States)

    Jerković, Igor; Tuberoso, Carlo I G; Tuberso, Carlo I G; Gugić, Mirko; Bubalo, Dragan

    2010-09-09

    Samples of unifloral sulla (Hedysarum coronarum L.) honey from Sardinia (Italy) were analysed. To investigate the chemical composition of the honey volatiles two solvent systems were used for ultrasonic solvent extraction (USE): 1) a 1:2 (v/v) pentane and diethyl ether mixture and 2) dichloromethane. All the extracts were analysed by GC and GC/MS. These procedures have permitted the identification of 56 compounds that include norisoprenoids, benzene derivatives, aliphatic compounds and Maillard reaction products. Norisoprenoids were the major compounds in both extracts, dominated by vomifoliol (5.3-11.2%; 9.6-14.0%) followed by minor percentages of other norisoprenoids such as α-isophorone, 4-ketoisophorone, 3-oxo-α-ionol or 3-oxo-α-ionone. Other abundant single compounds in the extracts were 3-hydroxy-4-phenylbutan-2-one (0.8-5.4%; 0.6-5.7%) and methyl syringate (3.0-5.7%; 2.2-4.1%). The composition of the volatiles and semi-volatiles in the obtained extracts suggests that sulla honey is quite distinctive relative to the other honeys that have been chemically studied by GC/MS, but no specific markers of the honey botanical origin were found.

  1. Composition of Sulla (Hedysarum coronarium L. Honey Solvent Extractives Determined by GC/MS: Norisoprenoids and Other Volatile Organic Compounds

    Directory of Open Access Journals (Sweden)

    Dragan Bubalo

    2010-09-01

    Full Text Available Samples of unifloral sulla (Hedysarum coronarum L. honey from Sardinia (Italy were analysed. To investigate the chemical composition of the honey volatiles two solvent systems were used for ultrasonic solvent extraction (USE: 1 a 1:2 (v/v pentane and diethyl ether mixture and 2 dichloromethane. All the extracts were analysed by GC and GC/MS. These procedures have permitted the identification of 56 compounds that include norisoprenoids, benzene derivatives, aliphatic compounds and Maillard reaction products. Norisoprenoids were the major compounds in both extracts, dominated by vomifoliol (5.3-11.2%; 9.6-14.0% followed by minor percentages of other norisoprenoids such as α-isophorone, 4-ketoisophorone, 3-oxo-α-ionol or 3-oxo-α-ionone. Other abundant single compounds in the extracts were 3-hydroxy-4-phenylbutan-2-one (0.8-5.4%; 0.6-5.7% and methyl syringate (3.0-5.7%; 2.2-4.1%. The composition of the volatiles and semi-volatiles in the obtained extracts suggests that sulla honey is quite distinctive relative to the other honeys that have been chemically studied by GC/MS, but no specific markers of the honey botanical origin were found.

  2. Pectin/carboxymethyl cellulose/microfibrillated cellulose composite scaffolds for tissue engineering.

    Science.gov (United States)

    Ninan, Neethu; Muthiah, Muthunarayanan; Park, In-Kyu; Elain, Anne; Thomas, Sabu; Grohens, Yves

    2013-10-15

    Highly porous three-dimensional scaffolds made of biopolymers are of great interest in tissue engineering applications. A novel scaffold composed of pectin, carboxymethyl cellulose (CMC) and microfibrillated cellulose (MFC) were synthesised using lyophilisation technique. The optimised scaffold with 0.1% MFC, C(0.1%), showed highest compression modulus (~3.987 MPa) and glass transition temperature (~103 °C). The pore size for the control scaffold, C(0%), was in the range of 30-300 μm while it was significantly reduced to 10-250 μm in case of C(0.1%). Using micro computed tomography, the porosity of C(0.1%) was estimated to be 88%. C(0.1%) showed excellent thermal stability and lower degradation rate compared to C(0%). The prepared samples were also characterised using XRD and FTIR. C(0.1%) showed controlled water uptake ability and in vitro degradation in PBS. It exhibited highest cell viability on NIH3T3 fibroblast cell line. These results suggest that these biocompatible composite scaffolds can be used for tissue engineering applications. Copyright © 2013 Elsevier Ltd. All rights reserved.

  3. Composition of volatile aromatic compounds and minerals of tarhana enriched with cherry laurel (Laurocerasus officinalis).

    Science.gov (United States)

    Temiz, Hasan; Tarakçı, Zekai

    2017-03-01

    Different concentrations of cherry laurel pulp (0, 5, 10, 15 and 20%) were used to produce tarhana samples. Volatile aromatic compounds and minor mineral content were investigated. Volatile aromatic compounds were analyzed by using GC-MS with SPME fiber and minor mineral values were evaluated with inductively coupled plasma optical emission spectrometer. The statistical analysis showed that addition of pulp affected volatile aromatic compounds and minor mineral content significantly. Thirty five volatile aromatic compounds were found in tarhana samples. The octanoic acid from acids, benzaldehyde (CAS) phenylmethanal from aldehydes, 6-methyl-5-hepten-2-one from ketones, octadecane (CAS) n -octadecane form terpenes, ethyl caprylate from esters and benzenemethanol (CAS) benzyl alcohol from alcohols had the highest percentage of volatile aromatic compounds. Tarhana samples were rich source of Mn, Cu and Fe content.

  4. Composition and function of haemolymphatic tissues in the European common shrew.

    Directory of Open Access Journals (Sweden)

    Daniel P Bray

    Full Text Available BACKGROUND: Studies of wild animals responding to their native parasites are essential if we are to understand how the immune system functions in the natural environment. While immune defence may bring increased survival, this may come at a resource cost to other physiological traits, including reproduction. Here, we tested the hypothesis that wild common shrews (Sorex araneus, which produce large numbers of offspring during the one breeding season of their short life span, forgo investment in immunity and immune system maintenance, as increased longevity is unlikely to bring further opportunities for mating. In particular, we predicted that adult shrews, with shorter expected lifespans, would not respond as effectively as young animals to infection. METHODOLOGY/PRINCIPAL FINDINGS: We examined haemolymphatic tissues from wild-caught common shrews using light and transmission electron microscopy, applied in conjunction with immunohistology. We compared composition and function of these tissues in shrews of different ages, and the extent and type of inflammatory reactions observed in response to natural parasitic infections. All ages seemed able to mount systemic, specific immune responses, but adult shrews showed some signs of lymphatic tissue exhaustion: lymphatic follicles in adults (n = 21 were both smaller than those in sub-adults (n = 18; Wald = 11.1, p<0.05 and exhibited greater levels of depletion (Wald = 13.3, p<0.05. CONCLUSIONS/SIGNIFICANCE: Contrary to our expectations, shrews respond effectively to their natural parasites, and show little indication of immunosenescence as adults. The pancreas of Aselli, a unique lymphoid organ, may aid in providing efficient immune responses through the storage of large numbers of plasma cells. This may allow older animals to react effectively to previously encountered parasites, but infection by novel agents, and eventual depletion of plasma cell reserves, could both still be factors in the near

  5. Evaluating protein incorporation and release in electrospun composite scaffolds for bone tissue engineering applications.

    Science.gov (United States)

    Briggs, Tonye; Matos, Jeffrey; Collins, George; Arinzeh, Treena Livingston

    2015-10-01

    Electrospun polymer/ceramic composites have gained interest for use as scaffolds for bone tissue engineering applications. In this study, we investigated methods to incorporate Platelet Derived Growth Factor-BB (PDGF-BB) in electrospun polycaprolactone (PCL) or PCL prepared with polyethylene oxide (PEO), where both contained varying levels (up to 30 wt %) of ceramic composed of biphasic calcium phosphates, hydroxyapatite (HA)/β-tricalcium phosphate (TCP). Using a model protein, lysozyme, we compared two methods of protein incorporation, adsorption and emulsion electrospinning. Adsorption of lysozyme on scaffolds with ceramic resulted in minimal release of lysozyme over time. Using emulsion electrospinning, lysozyme released from scaffolds containing a high concentration of ceramic where the majority of the release occurred at later time points. We investigated the effect of reducing the electrostatic interaction between the protein and the ceramic on protein release with the addition of the cationic surfactant, cetyl trimethylammonium bromide (CTAB). In vitro release studies demonstrated that electrospun scaffolds prepared with CTAB released more lysozyme or PDGF-BB compared with scaffolds without the cationic surfactant. Human mesenchymal stem cells (MSCs) on composite scaffolds containing PDGF-BB incorporated through emulsion electrospinning expressed higher levels of osteogenic markers compared to scaffolds without PDGF-BB, indicating that the bioactivity of the growth factor was maintained. This study revealed methods for incorporating growth factors in polymer/ceramic scaffolds to promote osteoinduction and thereby facilitate bone regeneration. © 2015 Wiley Periodicals, Inc.

  6. Dietary effects on fatty acid composition in muscle tissue of juvenile European eel, Anguilla anguilla (L.)

    Science.gov (United States)

    Prigge, Enno; Malzahn, Arne M.; Zumholz, Karsten; Hanel, Reinhold

    2012-03-01

    The role of intracontinental migration patterns of European eel ( Anguilla anguilla) receives more and more recognition in both ecological studies of the European eel and possible management measures, but small-scale patterns proved to be challenging to study. We experimentally investigated the suitability of fatty acid trophic markers to elucidate the utilization of feeding habitats. Eight groups of juvenile European eels were fed on eight different diets in a freshwater recirculation system at 20°C for 56 days. Three groups were fed on freshwater diets ( Rutilus rutilus, Chironomidae larvae, and Gammarus pulex) and four groups were reared on diets of a marine origin ( Clupea harengus, Crangon crangon, Mysis spec., and Euphausia superba) and one on commercial pellets used in eel aquaculture. Fatty acid composition (FAC) of diets differed significantly with habitat. FAC of eel muscle tissue seemed to be rather insensitive to fatty acids supplied with diet, but the general pattern of lower n3:n6 and EPA:ARA ratios in freshwater prey organisms could be traced in the respective eels. Multivariate statistics of the fatty acid composition of the eels resulted in two distinct groups representing freshwater and marine treatments. Results further indicate the capability of selectively restraining certain fatty acids in eel, as e.g. the n3:n6 ratio in all treatments was feeding habitats of individual European eel.

  7. Biomineralized hydroxyapatite nanoclay composite scaffolds with polycaprolactone for stem cell-based bone tissue engineering.

    Science.gov (United States)

    Ambre, Avinash H; Katti, Dinesh R; Katti, Kalpana S

    2015-06-01

    Nanoclay modified with unnatural amino acid was used to design a nanoclay-hydroxyapatite (HAP) hybrid by mineralizing HAP in the nanoclay galleries mimicking biomineralization. This hybrid (in situ HAPclay) was used to fabricate polycaprolactone (PCL)/in situ HAPclay films and scaffolds for bone regeneration. Cell culture assays and imaging were used to study interactions between human mesenchymal stem cells (hMSCs) and PCL/in situ HAPclay composites (films and scaffolds). SEM imaging indicated MSC attachment, formation of mineralized extracellular (ECM) on PCL/in situ HAPclay films, and infiltration of MSCs to the interior of PCL/in situ HAPclay scaffolds. Mineralized ECM was formed by MSCs without use of osteogenic supplements. AFM imaging performed on this in vitro generated mineralized ECM on PCL/in situ HAPclay films revealed presence of components (collagen and mineral) of hierarchical organization reminiscent of natural bone. Cellular events observed during two-stage seeding experiments on PCL/in situ HAPclay films indicated similarities with events occurring during in vivo bone formation. PCL/in situ HAPclay films showed significantly increased (100-595% increase in elastic moduli) nanomechanical properties and PCL/in situ HAPclay scaffolds showed increased degradation. This work puts forth PCL/in situ HAPclay composites as viable biomaterials for bone tissue engineering. © 2014 Wiley Periodicals, Inc.

  8. Hydroxyapatite reinforced inherent RGD containing silk fibroin composite scaffolds: Promising platform for bone tissue engineering.

    Science.gov (United States)

    Behera, Sibaram; Naskar, Deboki; Sapru, Sunaina; Bhattacharjee, Promita; Dey, Tuli; Ghosh, Ananta K; Mandal, Mahitosh; Kundu, Subhas C

    2017-07-01

    Replacement and repair of ectopic bone defects and traumatized bone tissues are done using porous scaffolds and composites. The prerequisites for such scaffolds include high mechanical strength, osseoconductivity and cytocompatibility. The present work is designed to address such requirements by fabricating a reinforced cytocompatible scaffold. Biocompatible silk protein fibroin collected from tropical non-mulberry tasar silkworm (Antheraea mylitta) is used to fabricate fibroin-hydroxyapatite (HAp) nanocomposite particles using chemical precipitation method. In situ reinforcement of fibroin-HAp nanocomposite and external deposition of HAp particles on fibroin scaffold is carried out for comparative evaluations of bio-physical and biochemical characteristics. HAp deposited fibroin scaffolds provide greater mechanical strength and cytocompatibility, when compared with fibroin-HAp nanoparticles reinforced fibroin scaffolds. Minimal immune responses of both types of composite scaffolds are observed using osteoblast-macrophage co-culture model. Nanocomposite reinforced fibroin scaffold can be tailored further to accommodate different requirements depending on bone type or bone regeneration period. Copyright © 2017 Elsevier Inc. All rights reserved.

  9. Effects of dietary fat saturation on fatty acid composition and gene transcription in different tissues of Iberian pigs.

    Science.gov (United States)

    Benítez, R; Núñez, Y; Fernández, A; Isabel, B; Fernández, A I; Rodríguez, C; Barragán, C; Martín-Palomino, P; López-Bote, C; Silió, L; Óvilo, C

    2015-04-01

    The effect of two diets, respectively enriched with SFA (S) and PUFA (P), on FA tissue composition and gene expression was studied in fattened Iberian pigs. The FA composition of adipose, muscular and liver tissues was affected by dietary treatment. S group showed higher MUFA and MUFA/SFA ratio and lower PUFA and n-6/n-3 ratio than P group in all analyzed tissues. In muscle and liver the extracted lipids were separated into neutral lipids and polar lipid fractions which showed significantly different responses to the dietary treatment, especially in liver where no significant effect of diet was observed in NL fraction. The expression of six candidate genes related to lipogenesis and FA oxidation was analyzed by qPCR. In liver, stearoyl CoA desaturase (SCD), acetyl CoA carboxylase alpha (ACACA) and malic enzyme 1 (ME1) genes showed higher expression in S group. SCD, ACACA, ME1, and fatty acid synthase (FASN) gene expression levels showed a wide variation across the tested tissues, with much higher expression levels observed in adipose tissue than other tissues. Tissue FA profile and gene expression results support the deposition of dietary FA, the lipogenic effect of dietary saturated fat in liver and the employment of saturated dietary fat for endogenous synthesis of MUFA in all the analyzed tissues. Copyright © 2014 Elsevier Ltd. All rights reserved.

  10. The analysis of volatile organic compounds biomarkers for lung cancer in exhaled breath, tissues and cell lines.

    Science.gov (United States)

    Wang, Yishan; Hu, Yanjie; Wang, Di; Yu, Kai; Wang, Ling; Zou, Yingchang; Zhao, Cong; Zhang, Xuanlang; Wang, Ping; Ying, Kejing

    2012-01-01

    Volatile organic compounds (VOCs) biomarkers in breath provide a novel, noninvasive and quick approach to diagnosis lung cancer. The aim of the proposed study was to investigate the VOCs biomarkers in exhaled breath for lung cancer. The VOCs in exhaled breath of 88 lung cancer patients, 70 lung benign disease and 85 healthy people were analyzed by Solid Phase Micro Extraction - Gas Chromatography Mass Spectrometry (SPME-GCMS). Three types of lung cancer cells and 18 lung cancer patients' tissues were cultured in vitro. The VOCs in the headspace of these cultivations were analyzed as an evidence of production mechanism of the VOCs in breath. Three lung cancer diagnosis models were constructed respectively in exhaled breath samples using Linear Discriminant Analysis (LDA). Leave one out cross validation was employed to evaluate these models. 23 VOCs, whose areas under curve (AUC) of receiver operating characteristic (ROC) > 0.60 and p < 0.01, were confirmed as the VOCs biomarkers for lung cancer. Three diagnostic models based on 23 VOCs could easily discriminate lung cancer patients from controls with 96.47% sensitivity and 97.47% specificity. However, the discrimination between early stage and later stage lung cancer was not very obvious.

  11. Effect of Liquid Natural Rubber on Properties of Natural Rubber/Silica Composite Prepared by Wet Compounding

    Directory of Open Access Journals (Sweden)

    HE Fan

    2017-10-01

    Full Text Available Natural rubber/silica composites (NR/SiO2 was prepared by wet compounding technology with liquid natural rubber(LNR as compatibilizer. Curing characteristics, processing properties, filler dispersion and mechanical properties were investigated.The results showe that the optimum cure time is decreased 4.16 min, the processing properties of the composites were improved with the incorporation of LNR; better silica dispersion in NR in presence of LNR; the when silica is 60 phr, tensile strength and tear strength of the vulcanizates were increase 25.73% and 66.59%respectively; as far as the dynamic mechanical properties are concerned, the W(NR/SiO2 composites with LNR owned a combination of high wet skid resistance and low rolling resistance. It is revealed that LNR has better compatibility, which is attributed to LNR reaction with both NR and SiO2 to form compatibilizing interface.

  12. [Investigations on the relation between differentiation and the composition of soluble protein of tissue cultures and leaves of daucus carota].

    Science.gov (United States)

    Neumann, K H; Pauler, B

    1969-12-01

    The correlations between differentiation, the amino acid composition of total protein and of soluble protein, and the disc electrophoretic distribution of soluble protein of carrot tissue cultures and of carrot plants (leaves) were studied. In spite of pronounced and characteristic changes in the electrophoretic distribution of the components of soluble protein in various developmental stages of both bioassays, no significant differences in the amino acid composition of protein were observed. With progressive development of whole carrot plants and of carrot tissue cultures, the number of protein bands on disc electropherogramms increased.

  13. Characterization of wood plastic composites made from landfill-derived plastic and sawdust: Volatile compounds and olfactometric analysis

    International Nuclear Information System (INIS)

    Félix, Juliana S.; Domeño, Celia; Nerín, Cristina

    2013-01-01

    Graphical abstract: This work details the characterization of VOCs of WPC, produced from residual materials which would have landfills as current destination, and evaluates their odor profile. Highlights: ► More than 140 volatile compounds were identified in raw materials and WPC products. ► Markers were related to the thermal degradation, sawdust or coupling agents. ► WPC prototype showed a characteristic odor profile of burnt, sweet and wax-like. ► Aldehydes, carboxylic acids, ketones and phenols were odor descriptors of WPC. - Abstract: Application of wood plastic composites (WPCs) obtained from recycled materials initially intended for landfill is usually limited by their composition, mainly focused on release of volatile organic compounds (VOCs) which could affect quality or human safety. The study of the VOCs released by a material is a requirement for new composite materials. Characterization and quantification of VOCs of several WPC produced with low density polyethylene (LDPE) and polyethylene/ethylene vinyl acetate (PE/EVA) films and sawdust were carried out, in each stage of production, by solid phase microextraction in headspace mode (HS-SPME) and gas chromatography–mass spectrometry (GC–MS). An odor profile was also obtained by HS-SPME and GC–MS coupled with olfactometry analysis. More than 140 compounds were observed in the raw materials and WPC samples. Some quantified compounds were considered WPC markers such as furfural, 2-methoxyphenol, N-methylphthalimide and 2,4-di-tert-butylphenol. Hexanoic acid, acetic acid, 2-methoxyphenol, acetylfuran, diacetyl, and aldehydes were the most important odorants. None of the VOCs were found to affect human safety for use of the WPC

  14. Characterization of wood plastic composites made from landfill-derived plastic and sawdust: Volatile compounds and olfactometric analysis

    Energy Technology Data Exchange (ETDEWEB)

    Félix, Juliana S., E-mail: jfelix@unizar.es [Department of Analytical Chemistry, I3A, EINA, University of Zaragoza (UNIZAR), Zaragoza 50018 (Spain); Domeño, Celia, E-mail: cdomeno@unizar.es [Department of Analytical Chemistry, I3A, EINA, University of Zaragoza (UNIZAR), Zaragoza 50018 (Spain); Nerín, Cristina, E-mail: cnerin@unizar.es [Department of Analytical Chemistry, I3A, EINA, University of Zaragoza (UNIZAR), Zaragoza 50018 (Spain)

    2013-03-15

    Graphical abstract: This work details the characterization of VOCs of WPC, produced from residual materials which would have landfills as current destination, and evaluates their odor profile. Highlights: ► More than 140 volatile compounds were identified in raw materials and WPC products. ► Markers were related to the thermal degradation, sawdust or coupling agents. ► WPC prototype showed a characteristic odor profile of burnt, sweet and wax-like. ► Aldehydes, carboxylic acids, ketones and phenols were odor descriptors of WPC. - Abstract: Application of wood plastic composites (WPCs) obtained from recycled materials initially intended for landfill is usually limited by their composition, mainly focused on release of volatile organic compounds (VOCs) which could affect quality or human safety. The study of the VOCs released by a material is a requirement for new composite materials. Characterization and quantification of VOCs of several WPC produced with low density polyethylene (LDPE) and polyethylene/ethylene vinyl acetate (PE/EVA) films and sawdust were carried out, in each stage of production, by solid phase microextraction in headspace mode (HS-SPME) and gas chromatography–mass spectrometry (GC–MS). An odor profile was also obtained by HS-SPME and GC–MS coupled with olfactometry analysis. More than 140 compounds were observed in the raw materials and WPC samples. Some quantified compounds were considered WPC markers such as furfural, 2-methoxyphenol, N-methylphthalimide and 2,4-di-tert-butylphenol. Hexanoic acid, acetic acid, 2-methoxyphenol, acetylfuran, diacetyl, and aldehydes were the most important odorants. None of the VOCs were found to affect human safety for use of the WPC.

  15. Detection, Composition and Treatment of Volatile Organic Compounds from Waste Treatment Plants

    Directory of Open Access Journals (Sweden)

    Antoni Sánchez

    2011-04-01

    Full Text Available Environmental policies at the European and global level support the diversion of wastes from landfills for their treatment in different facilities. Organic waste is mainly treated or valorized through composting, anaerobic digestion or a combination of both treatments. Thus, there are an increasing number of waste treatment plants using this type of biological treatment. During waste handling and biological decomposition steps a number of gaseous compounds are generated or removed from the organic matrix and emitted. Different families of Volatile Organic Compounds (VOC can be found in these emissions. Many of these compounds are also sources of odor nuisance. In fact, odors are the main source of complaints and social impacts of any waste treatment plant. This work presents a summary of the main types of VOC emitted in organic waste treatment facilities and the methods used to detect and quantify these compounds, together with the treatment methods applied to gaseous emissions commonly used in composting and anaerobic digestion facilities.

  16. The biocompatibility of carbon hydroxyapatite/β-glucan composite for bone tissue engineering studied with Raman and FTIR spectroscopic imaging.

    Science.gov (United States)

    Sroka-Bartnicka, Anna; Kimber, James A; Borkowski, Leszek; Pawlowska, Marta; Polkowska, Izabela; Kalisz, Grzegorz; Belcarz, Anna; Jozwiak, Krzysztof; Ginalska, Grazyna; Kazarian, Sergei G

    2015-10-01

    The spectroscopic approaches of FTIR imaging and Raman mapping were applied to the characterisation of a new carbon hydroxyapatite/β-glucan composite developed for bone tissue engineering. The composite is an artificial bone material with an apatite-forming ability for the bone repair process. Rabbit bone samples were tested with an implanted bioactive material for a period of several months. Using spectroscopic and chemometric methods, we were able to determine the presence of amides and phosphates and the distribution of lipid-rich domains in the bone tissue, providing an assessment of the composite's bioactivity. Samples were also imaged in transmission using an infrared microscope combined with a focal plane array detector. CaF2 lenses were also used on the infrared microscope to improve spectral quality by reducing scattering artefacts, improving chemometric analysis. The presence of collagen and lipids at the bone/composite interface confirmed biocompatibility and demonstrate the suitability of FTIR microscopic imaging with lenses in studying these samples. It confirmed that the composite is a very good background for collagen growth and increases collagen maturity with the time of the bone growth process. The results indicate the bioactive and biocompatible properties of this composite and demonstrate how Raman and FTIR spectroscopic imaging have been used as an effective tool for tissue characterisation.

  17. Effects of temperature and medium composition on inhibitory activities of gossypol-related compounds against aflatoxigenic fungi.

    Science.gov (United States)

    Mellon, J E; Dowd, M K; Beltz, S B

    2013-07-01

    To investigate the effects of temperature and medium composition on growth/aflatoxin inhibitory activities of terpenoids gossypol, gossypolone and apogossypolone against Aspergillus flavus and A. parasiticus. The compounds were tested at a concentration of 100 μg ml(-1) in a Czapek Dox (Czapek) agar medium at 25, 31 and 37°C. Increased incubation temperature marginally increased growth inhibition caused by these compounds, but reduced the aflatoxin inhibition effected by gossypol. Gossypolone and apogossypolone retained good aflatoxin inhibitory activity against A. flavus and A. parasiticus at higher incubation temperatures. However, increased temperature also significantly reduced aflatoxin production in control cultures. The effects of the terpenoids on fungal growth and aflatoxin production against the same fungi were also determined in Czapek, Czapek with a protein/amino acid addendum and yeast extract sucrose (YES) media. Growth of these fungi in the protein-supplemented Czapek medium or in the YES medium greatly reduced the growth inhibition effects of the terpenoids. Apogossypolone displayed strong anti-aflatoxigenic activity in the Czapek medium, but this activity was significantly reduced in the protein-amended Czapek and YES media. Gossypol, which displayed little to no aflatoxin inhibitory activity in the Czapek medium, did yield significant anti-aflatoxigenic activity in the YES medium. Incubation temperature and media composition are important parameters involved in the regulation of aflatoxin production in A. flavus and A. parasiticus. These parameters also affect the potency of growth and aflatoxin inhibitory activities of these gossypol-related compounds against aflatoxigenic fungi. Studies utilizing gossypol-related compounds as inhibitory agents of biological activities should be interpreted with caution due to compound interaction with multiple components of the test system, especially serum proteins. Published [2013]. This article is a

  18. Novel scalable silicone elastomer and poly(2-hydroxyethyl methacrylate) (PHEMA) composite materials for tissue engineering and drug delivery applications

    DEFF Research Database (Denmark)

    Mohanty, Soumyaranjan; Hemmingsen, Mette; Wojcik, Magdalena

    2013-01-01

    In recent years hydrogels have received increasing attention as potential materials for applications in regenerative medicine. They can be used for scaffold materials providing structural integrity to tissue constructs, for controlled delivery of drugs and proteins to cell and tissues......, and for support materials in tissue growth. However, the real challenge is to obtain sufficiently good mechanical properties of the hydrogel. The present study shows the combination of two normally non-compatible materials, silicone elastomer and poly(2-hydroxyethyl methacrylate) (PHEMA), into a novel composite...... material with increased hydrophilicity in regard to virgin silicone elastomer, making it suitable as a scaffold for tissue engineering and with the concomitant possibility for delivering drug from the scaffold to the tissue. Interpenetrating polymer networks (IPNs) of silicone elastomer and PHEMA...

  19. The fabrication of microcrystalline cellulose-nanoZnO hybrid composites and their application in rubber compounds.

    Science.gov (United States)

    Liang, Yunhao; Liu, Xiaoling; Wang, Lili; Sun, Jutao

    2017-08-01

    Microcrystalline cellulose (MCC) was first swollen and then hybridized with nano-ZnO to prepare MCC-ZnO hybrid composites using a microreactor technique. The microstructure of the ZnO particles was controlled and characterized. The results showed that the nano-ZnO particles had a Wurtzite structure and were successfully loaded on the surface of the MCC, and the ZnO morphologies could be shaped as spheres, rods or tubes by controlling the size of microreactor. The hybrid ratio of ZnO was approximately 20%. The MCC-ZnO hybrids were used in SSBR2557A/SiO 2 compounds to replace portions of the silica. The results showed that MCC-ZnO compounds had improved processing and mechanical properties compared to the pure MCC sample. The dynamic mechanical analysis (DMA) indicated that MCC-ZnO compounds had higher wet-skid resistance and lower rolling resistance than the control samples. The interfacial bonding between the hybrids and rubber was also improved; the sizes of the hybrid composites decreased in situ during the rubber processing. Copyright © 2017 Elsevier Ltd. All rights reserved.

  20. Preparation of dexamethasone-loaded biphasic calcium phosphate nanoparticles/collagen porous composite scaffolds for bone tissue engineering.

    Science.gov (United States)

    Chen, Ying; Kawazoe, Naoki; Chen, Guoping

    2018-02-01

    Although bone is regenerative, its regeneration capacity is limited. For bone defects beyond a critical size, further intervention is required. As an attractive strategy, bone tissue engineering (bone TE) has been widely investigated to repair bone defects. However, the rapid and effective bone regeneration of large non-healing defects is still a great challenge. Multifunctional scaffolds having osteoinductivity and osteoconductivity are desirable to fasten functional bone tissue regeneration. In the present study, biomimetic composite scaffolds of collagen and biphasic calcium phosphate nanoparticles (BCP NPs) with a controlled release of dexamethasone (DEX) and the controlled pore structures were prepared for bone TE. DEX was introduced in the BCP NPs during preparation of the BCP NPs and hybridized with collagen scaffolds, which pore structures were controlled by using pre-prepared ice particulates as a porogen material. The composite scaffolds had well controlled and interconnected pore structures, high mechanical strength and a sustained release of DEX. The composite scaffolds showed good biocompatibility and promoted osteogenic differentiation of hMSCs when used for three-dimensional culture of human bone marrow-derived mesenchymal stem cells. Subcutaneous implantation of the composite scaffolds at the dorsa of athymic nude mice demonstrated that they facilitated the ectopic bone tissue regeneration. The results indicated the DEX-loaded BCP NPs/collagen composite scaffolds had high potential for bone TE. Scaffolds play a crucial role for regeneration of large bone defects. Biomimetic scaffolds having the same composition of natural bone and a controlled release of osteoinductive factors are desirable for promotion of bone regeneration. In this study, composite scaffolds of collagen and biphasic CaP nanoparticles (BCP NPs) with a controlled release nature of dexamethasone (DEX) were prepared and their porous structures were controlled by using ice particulates

  1. Preparation of collagen/polyurethane/knitted silk as a composite scaffold for tendon tissue engineering.

    Science.gov (United States)

    Sharifi-Aghdam, Maryam; Faridi-Majidi, Reza; Derakhshan, Mohammad Ali; Chegeni, Arash; Azami, Mahmoud

    2017-07-01

    The main objective of this study was to prepare a hybrid three-dimensional scaffold that mimics natural tendon tissues. It has been found that a knitted silk shows good mechanical strength; however, cell growth on the bare silk is not desirable. Hence, electrospun collagen/polyurethane combination was used to cover knitted silk. A series of collagen and polyurethane solutions (4%-7% w/v) in aqueous acetic acid were prepared and electrospun. According to obtained scanning electron microscopy images from pure collagen and polyurethane nanofibers, concentration was set constant at 5% (w/v) for blend solutions of collagen/polyurethane. Afterward, blend solutions with the weight ratios of 75/25, 50/50 and 25/75 were electrospun. Scanning electron microscopy images demonstrated the smooth and uniform morphology for the optimized nanofibers. The least fibers diameter among three weight ratios was found for collagen/polyurethane (25/75) which was 100.86 ± 40 nm and therefore was selected to be electrospun on the knitted silk. Attenuated total reflectance-Fourier transform infrared spectra confirmed the chemical composition of obtained electrospun nanofibers on the knitted silk. Tensile test of the specimens including blend nanofiber, knitted silk and commercial tendon substitute examined and indicated that collagen/polyurethane-coated knitted silk has appropriate mechanical properties as a scaffold for tendon tissue engineering. Then, Alamar Blue assay of the L929 fibroblast cell line seeded on the prepared scaffolds demonstrated appropriate viability of the cells with a significant proliferation on the scaffold containing more collagen content. The results illustrate that the designed structure would be promising for being used as a temporary substitute for tendon repair.

  2. Compositions of volatile organic compounds emitted from melted virgin and waste plastic pellets.

    Science.gov (United States)

    Yamashita, Kyoko; Yamamoto, Naomichi; Mizukoshi, Atsushi; Noguchi, Miyuki; Ni, Yueyong; Yanagisawa, Yukio

    2009-03-01

    To characterize potential air pollution issues related to recycling facilities of waste plastics, volatile organic compounds (VOCs) emitted from melted virgin and waste plastics pellets were analyzed. In this study, laboratory experiments were performed to melt virgin and waste plastic pellets under various temperatures (150, 200, and 250 degrees C) and atmospheres (air and nitrogen [N2]). In the study presented here, low-density polyethylene (LDPE), polypropylene (PP), polystyrene (PS) and the recycled waste plastic pellets were used. The VOCs generated from each plastic pellets were collected by Tenax/Carboxen adsorbent tubes and analyzed by thermal desorption-gas chromatography/mass spectrometry (TD-GC/MS). The result showed the higher temperatures generated larger amounts of total VOCs (TVOCs). The VOCs emitted from the virgin plastic pellets likely originated from polymer degradation. Smaller TVOC emissions were observed in N2 atmosphere than in air atmosphere. In particular, larger amounts of the oxygenated compounds, which are generally hazardous and malodorous, were detected in air than in N2. In addition to the compounds originating from polymer degradation, the compounds originating from the plastic additives were also detected from LDPE and PS. Furthermore, various species of VOCs likely originating from contaminant inseparate polyvinyl chloride (PVC), food residues, cleaning agents, degreasers, and so on were detected from the waste plastic. Thus, melting waste plastics, as is conducted in recycling facilities, might generate larger amounts of potentially toxic compounds than producing virgin plastics.

  3. Silk Fibroin-Alginate-Hydroxyapatite Composite Particles in Bone Tissue Engineering Applications In Vivo

    Science.gov (United States)

    Jo, You-Young; Kim, Seong-Gon; Kwon, Kwang-Jun; Kweon, HaeYong; Chae, Weon-Sik; Yang, Won-Geun; Lee, Eun-Young; Seok, Hyun

    2017-01-01

    The aim of this study was to evaluate the in vivo bone regeneration capability of alginate (AL), AL/hydroxyapatite (HA), and AL/HA/silk fibroin (SF) composites. Forty Sprague Dawley rats were used for the animal experiments. Central calvarial bone (diameter: 8.0 mm) defects were grafted with AL, AL/HA, or AL/HA/SF. New bone formation was evaluated by histomorphometric analysis. To demonstrate the immunocompatibility of each group, the level of tumor necrosis factor (TNF)-α expression was studied by immunohistochemistry (IHC) and quantitative reverse transcription polymerase chain reaction (qRT-PCR) at eight weeks post implantation. Additionally, osteogenic markers, such as fibroblast growth factor (FGF)-23, osteoprotegerin (OPG), and Runt-related transcription factor (Runx2) were evaluated by qPCR or IHC at eight weeks post implantation. The AL/HA/SF group showed significantly higher new bone formation than did the control group (p = 0.044) and the AL group (p = 0.035) at four weeks post implantation. Additionally, the AL/HA/SF group showed lower relative TNF-α mRNA levels and higher FGF-23 mRNA levels than the other groups did at eight weeks post implantation. IHC results demonstrated that the AL/HA/SF group had lower TNF-α expression and higher OPG and Runx2 expression at eight weeks post implantation. Additionally, no evidence of the inflammatory reaction or giant cell formation was observed around the residual graft material. We concluded that the AL/HA/SF composite could be effective as a scaffold for bone tissue engineering. PMID:28420224

  4. In vitro assessment of the composition and microhardness of hard tissues of oral cavity submitted to gamma irradiation

    International Nuclear Information System (INIS)

    Paredes, Wilber Edison Bernaola

    2017-01-01

    Clinical Radiotherapy is extremely important for the treatment of malignant lesions of the head and neck region, however, exposure to ionizing radiation can lead to systemic or local complications during and after radiation treatment. Among these immediate local complications are the oral cavity xerostomia and the consequent oral mucositis. Regarding late complications produced by radiation, tooth decay of radiation and osteoradionecrosis are included, which are considered dose-dependent lesions, with high incidence in recent decades and difficult to manage, although these appear after completion of treatment and under the influence of local factors. The methodology proposed in this study consists in evaluating the effect of gamma radiation after irradiation of the samples, using the dose used in patients suffering with head and neck cancer. The samples were obtained from human enamel and root dentin; and swine mandibular bone, which were previously polished, and then submitted to the analysis of the initial surface microhardness of all groups. Subsequently, the samples were irradiated in a dose rate of 4 Gy per day, completing a total dose of 72 Gy. Finally, the samples were submitted to surface microhardness analysis after irradiation, which presented statistically significant results from the Student t, ANOVA and Tukey statistical tests referred to the difference of the mean of the initial and final values of each study group with a significant value of p = 0.00 (<0.05). Regarding the morphological analysis in scanning electron microscopy (SEM), the deleterious effect of gamma irradiation was evidenced as structural cracks, breaks and superficial fractures of the analyzed tissues and the biochemical analysis by Attenuated Total Reflection technique using Fourier transform infrared spectroscopy (ATR - FTIR) showed degradation of inorganic components and denaturation of organic compounds; whereby, the effect of gamma irradiation on the hard tissues of the oral

  5. Effect of physiological harvest stages on the composition of bioactive compounds in Cavendish bananas.

    Science.gov (United States)

    Bruno Bonnet, Christelle; Hubert, Olivier; Mbeguie-A-Mbeguie, Didier; Pallet, Dominique; Hiol, Abel; Reynes, Max; Poucheret, Patrick

    2013-04-01

    The combined influence of maturation, ripening, and climate on the profile of bioactive compounds was studied in banana (Musa acuminata, AAA, Cavendish, cv. Grande Naine). Their bioactive compounds were determined by the Folin-Ciocalteu assay and high-performance thin layer chromatographic (HPTLC) method. The polyphenol content of bananas harvested after 400 degree days remained unchanged during ripening, while bananas harvested after 600 and 900 degree days exhibited a significant polyphenol increase. Although dopamine was the polyphenol with the highest concentration in banana peels during the green developmental stage and ripening, its kinetics differed from the total polyphenol profile. Our results showed that this matrix of choice (maturation, ripening, and climate) may allow selection of the banana (M. acuminata, AAA, Cavendish, cv. Grande Naine) status that will produce optimal concentrations of identified compounds with human health relevance.

  6. Effect of physiological harvest stages on the composition of bioactive compounds in Cavendish bananas*

    Science.gov (United States)

    Bruno Bonnet, Christelle; Hubert, Olivier; Mbeguie-A-Mbeguie, Didier; Pallet, Dominique; Hiol, Abel; Reynes, Max; Poucheret, Patrick

    2013-01-01

    The combined influence of maturation, ripening, and climate on the profile of bioactive compounds was studied in banana (Musa acuminata, AAA, Cavendish, cv. Grande Naine). Their bioactive compounds were determined by the Folin-Ciocalteu assay and high-performance thin layer chromatographic (HPTLC) method. The polyphenol content of bananas harvested after 400 degree days remained unchanged during ripening, while bananas harvested after 600 and 900 degree days exhibited a significant polyphenol increase. Although dopamine was the polyphenol with the highest concentration in banana peels during the green developmental stage and ripening, its kinetics differed from the total polyphenol profile. Our results showed that this matrix of choice (maturation, ripening, and climate) may allow selection of the banana (M. acuminata, AAA, Cavendish, cv. Grande Naine) status that will produce optimal concentrations of identified compounds with human health relevance. PMID:23549844

  7. Analysis of “Favorable Growth Element” Based on Rare Earth-aluminum Composite Mechanism of Compound Process

    Science.gov (United States)

    Hao, Baohong; Zeng, Qihui; Zhao, Jin

    2018-01-01

    Under the background that failure resulted in by high temperature once only aluminum oxide is used as the gasoline additive. This paper, with the purpose to solve this problem, is to synthesize AcAl oxide for gasoline additive. In order to get the rare-earth-aluminum oxide, first, a complex model of rare earth oxide based on theories about ion coordination is established. Then, by the complex model, the type of “compound growth unit” when rare earth elements join the hydrothermal conditions and the inclination that “diversification” might probably happen are deduced. Depending on the results got by complex model, this paper introduces the type of compound and its existence conditions of “Compound growth unit” owned by stable rare-earth-aluminum oxide. By adjusting the compositions of modifier, compound materials of rare earth-aluminum oxide used for gasoline additive is made. By XRD test, aperture test, adsorption test and desorption test, the theoretical deduction is proved to be right. From the experiment, it is concluded that: a dense environment is the pre-condition to form rare-earth-aluminum polymer, which is also an essential condition for the polymer to update to a favorable growth unit and produce mesoporous rare-earth-aluminum oxide with high activity.

  8. Solid Amalgam Composite Electrode as a New Sensor for the Determination of Biologically Active Compounds

    Czech Academy of Sciences Publication Activity Database

    Josypčuk, Bohdan; Navrátil, Tomáš; Lukina, A.; Pecková, K.; Barek, J.

    2007-01-01

    Roč. 52, č. 6 (2007), s. 897-910 ISSN 0009-2223 R&D Projects: GA ČR GA203/07/1195; GA MŠk(CZ) LC06035 Institutional research plan: CEZ:AV0Z40400503 Keywords : solid composite electrode * solid amalgam electrodes * solid amalgam composite electrode * voltammetry Subject RIV: CG - Electrochemistry Impact factor: 0.529, year: 2007

  9. Fiber/collagen composites for ligament tissue engineering: influence of elastic moduli of sparse aligned fibers on mesenchymal stem cells.

    Science.gov (United States)

    Thayer, Patrick S; Verbridge, Scott S; Dahlgren, Linda A; Kakar, Sanjeev; Guelcher, Scott A; Goldstein, Aaron S

    2016-08-01

    Electrospun microfibers are attractive for the engineering of oriented tissues because they present instructive topographic and mechanical cues to cells. However, high-density microfiber networks are too cell-impermeable for most tissue applications. Alternatively, the distribution of sparse microfibers within a three-dimensional hydrogel could present instructive cues to guide cell organization while not inhibiting cell behavior. In this study, thin (∼5 fibers thick) layers of aligned microfibers (0.7 μm) were embedded within collagen hydrogels containing mesenchymal stem cells (MSCs), cultured for up to 14 days, and assayed for expression of ligament markers and imaged for cell organization. These microfibers were generated through the electrospinning of polycaprolactone (PCL), poly(ester-urethane) (PEUR), or a 75/25 PEUR/PCL blend to produce microfiber networks with elastic moduli of 31, 15, and 5.6 MPa, respectively. MSCs in composites containing 5.6 MPa fibers exhibited increased expression of the ligament marker scleraxis and the contractile phenotype marker α-smooth muscle actin versus the stiffer fiber composites. Additionally, cells within the 5.6 MPa microfiber composites were more oriented compared to cells within the 15 and 31 MPa microfiber composites. Together, these data indicate that the mechanical properties of microfiber/collagen composites can be tuned for the engineering of ligament and other target tissues. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 1894-1901, 2016. © 2016 Wiley Periodicals, Inc.

  10. Influence of Compounding Methods on Poly(vinyl) Alcohol/ Sago Pith Waste Bio composites: Mechanical and Water Absorption Properties

    International Nuclear Information System (INIS)

    Toh, W.Y.; Lai, J.C.; Aizan, W.A.R.W.

    2011-01-01

    Several methods of incorporating sago pith waste (SPW) into poly(vinyl alcohol) (PVA) had been conducted: (i) dry blending (PVA/SPW/G), (ii) blending of SPW and pre-plasticised PVA (pPVA/SPW/G) and (iii) blending of pre-plasticised of both PVA and SPW (pPVA/pSPW). The effect of the compounding method on the mechanical and water absorption properties were investigated. The addition of SPW into PVA greatly reduced the tensile strength and elongation at break. The tensile strength and elongation at break of PVA/SPW composites with identical geometry during compounding stage (powder/powder and pellet/pellet), which were PVA/SPW/G and pPVA/pSPW yielded the highest value. The percentage of water absorbed by PVA/SPW/G (without pre-plasticization) was the highest, followed by pPVA/pSPW and pPVA/SPW/G. (author)

  11. Photodegradation profiles of PVC compound and wood/PVC composites under UV weathering

    Directory of Open Access Journals (Sweden)

    N. Sombatsompop

    2013-02-01

    Full Text Available This work aimed to study the effect of different ultraviolet (UV weathering conditions (natural and accelerated on the photodegradation of polyvinyl chloride (PVC and wood/polyvinyl chloride (WPVC composites by considering the structural and physical changes of PVC and WPVC samples as well as examining the photodegradation profiles at different depths from the sample surfaces. The photodegradation of PVC and WPVC composites under natural weathering conditions were lower than those under accelerated weathering conditions. The addition of Tinuvin P stabilizer at 2 phr was sufficient to stabilize PVC and WPVC composites, whereas the presence of wood appeared to accelerate the photodegradation of PVC under both natural and accelerated weathering conditions. When considering the photodegradation profiles at different depths of the samples, it was found that the polyene and carbonyl sequences of PVC and WPVC composites were high at the sample surfaces and tended to decrease rapidly with increasing depth from the specimen surface before stabilizing at a depth of 60 μm for PVC and 80 μm for WPVC composites. The differences in specimen depths for the stabilization of polyene and carbonyl sequences in PVC and WPVC samples implied that the presence of wood particles enhanced the absorption of UV radiation by the WPVC composite samples.

  12. Arginine-glycine-aspartic acid modified rosette nanotube-hydrogel composites for bone tissue engineering.

    Science.gov (United States)

    Zhang, Lijie; Rakotondradany, Felaniaina; Myles, Andrew J; Fenniri, Hicham; Webster, Thomas J

    2009-03-01

    An RGDSK (Arg-Gly-Asp-Ser-Lys) modified rosette nanotube (RNT) hydrogel composite with unique surface chemistry and favorable cytocompatibility properties for bone repair was developed and investigated. The RNTs are biologically inspired nanomaterials obtained through the self-assembly of a DNA base analog (G wedge C base) with tailorable chemical functionality and physical properties. In this study, a cell-adhesive RGDSK peptide was covalently attached to the G wedge C base, assembled into RNTs, and structurally characterized by (1)H/(13)C NMR spectroscopy, mass spectrometry, and electron microscopy. Importantly, results showed that the RGDSK modified RNT hydrogels caused around a 200% increase in osteoblast (bone-forming cell) adhesion relative to hydrogel controls. In addition, osteoblast proliferation was enhanced on RNT hydrogels compared to hydrogel controls after 3 days, which further confirmed the promising cytocompatibility properties of this scaffold. When analyzing the mechanism of increased osteoblast density on RNT hydrogels, it was found that more fibronectin (a protein which promotes osteoblast adhesion) adsorption occurred on RNT coated hydrogels than uncoated hydrogels. As osteoblast adhesion was greatly enhanced on RNT coated hydrogels compared to poly l-lysine and collagen coated hydrogels, this study indicated that not only the surface chemistry was important in improving osteoblast density (via lysine or RGD groups functionalized on RNTs), but also the biomimetic nanoscale properties of RNTs provided a cell-favorable environment. These results warrant further studies on RNTs in hydrogels for better bone tissue regeneration.

  13. Branched Nerve Allografts to Improve Outcomes in Facial Composite Tissue Transplantation

    Science.gov (United States)

    2017-12-01

    to assess functional recovery using compound muscle action potential (CMAP) and histologic recovery by immunohistochemistry (IHC) using...were utilized as functional outcomes in addition to the compound muscle action potential waveform, each of which is represented below: 12 No...Using stimulus duration of 0.02 ms, stimulus intensity was increased gradually until a supramaximal compound muscle action potential was obtained

  14. ISOTOPIC (14C) AND CHEMICAL COMPOSITION OF ATMOSPHERIC VOLATILE ORGANIC COMPOUND FRACTIONS - PRECURSORS TO OZONE FORMATION

    Science.gov (United States)

    Atmospheric volatile organic compounds (VOCs) are an important factor in the production of ozone near ground level [3]. Many hydrocarbons originate from auto exhaust. However, a number of VOCs, e.g., isoprene, are known to be natural in origin. To develop reliable models for un...

  15. Variability in the composition of anti-oxidant compounds in Echinacea species by HPLC.

    Science.gov (United States)

    Pellati, Federica; Benvenuti, Stefania; Melegari, Michele; Lasseigne, Todd

    2005-01-01

    A fast and reliable HPLC method for the determination of caffeic acid derivatives (caftaric acid, chlorogenic acid, caffeic acid, cynarin, echinacoside and cichoric acid) in various species of the genus Echinacea has been developed. Extraction of root samples by magnetic stirring with 80% methanol aqueous solution at room temperature allowed the complete recovery of all compounds of interest. Root extracts were analysed on a reversed-phase column with gradient elution and photodiode array detection. Caffeic acid derivatives showed differential qualitative and quantitative distributions in Echinacea species. The total amount of phenolic compounds ranged from 33.95 to 0.32 mg/g. The highest contents of caffeic acid derivatives were found in E. paradoxa var. paradoxa, E. paradoxa var. neglecta and E. purpurea, followed by E. angustifolia var. angustifolia, E. simulata, E. pallida and E. laevigata, whilst E. tennesseensis, E. sanguinea and E. atrorubens had low amounts of phenolic compounds. The radical scavenging activities of methanolic extracts of roots of Echinacea species was evaluated in vitro using the DPPH* radical scavenging method. The EC50 values of the samples ranged from 122 to 1223 microg/mL. The radical scavenging activities of the root extracts were correlated with the content of phenolic compounds, with a correlation coefficient (r2) of 0.923.

  16. Lipopolyamine compound, pharmaceutical composition and nucleic acid transfer vector containing same, and preparation method

    NARCIS (Netherlands)

    Bischoff, Rainer; Cordier, Yves; Transgene, S.A.

    1997-01-01

    A compound of formula (II), wherein R 1 is hydrogen and R 2 is hydrogen or, for only one of its n substituents, a deoxy residue in the 3 position of the cholesterol or a mono- or polyvalent residue of a cholesterol derivative having one or..

  17. Comparison of the Chemical Composition of “Cystoseira sedoides (Desfontaines C. Agardh” Volatile Compounds Obtained by Different Extraction Techniques

    Directory of Open Access Journals (Sweden)

    Naima Bouzidi

    2016-01-01

    Full Text Available The volatile fraction of the brown alga Cystoseira sedoides (Desfontaines C.Agardh is prepared from the crude extract through the following three extraction methods: Hydrodistillation (HD, focused microwave assisted hydrodistillation (FMAHD and supercritical fluid extraction (SFE. The volatile fractions are analyzed by gas chromatography-flame ionization detector-mass spectrometry (GC-FID-MS, the chemical components are identified on the basis of the comparison of their retention indices with literature and their mass spectra with those reported in commercial databases. The chemical composition of the volatile fractions obtained by different extraction techniques fall into three major chemical classes: fatty acids and derivatives, sesquiterpenes, and hydrocarbons and derivatives. Others Compounds belonging to different chemical classes are found in that chemical composition.

  18. Compound Specific Hydrogen Isotope Composition of Type II and III Kerogen Extracted by Pyrolysis-GC-MS-IRMS

    Science.gov (United States)

    Socki, Richard A.; Pernia, Denet; Evans, Michael; Fu, Qi; Bissada, Kadry K.; Curiale, Joseph A.; Niles, Paul B.

    2013-01-01

    The use of Hydrogen (H) isotopes in understanding oil and gas resource plays is in its infancy. Described here is a technique for H isotope analysis of organic compounds pyrolyzed from oil and gas shale-derived kerogen. Application of this technique will progress our understanding. This work complements that of Pernia et al. (2013, this meeting) by providing a novel method for the H isotope analysis of specific compounds in the characterization of kerogen extracted by analytically diverse techniques. Hydrogen isotope analyses were carried out entirely "on-line" utilizing a CDS 5000 Pyroprobe connected to a Thermo Trace GC Ultra interfaced with a Thermo MAT 253 IRMS. Also, a split of GC-separated products was sent to a DSQ II quadrupole MS to make semi-quantitative compositional measurements of the extracted compounds. Kerogen samples from five different basins (type II and III) were dehydrated (heated to 80 C overnight in vacuum) and analyzed for their H isotope compositions by Pyrolysis-GC-MS-TC-IRMS. This technique takes pyrolysis products separated via GC and reacts them in a high temperature conversion furnace (1450 C) which quantitatively forms H2, following a modified method of Burgoyne and Hayes, (1998, Anal. Chem., 70, 5136-5141). Samples ranging from approximately 0.5 to 1.0mg in size, were pyrolyzed at 800 C for 30s. Compounds were separated on a Poraplot Q GC column. Hydrogen isotope data from all kerogen samples typically show enrichment in D from low to high molecular weight compounds. Water (H2O) average deltaD = -215.2 (V-SMOW), ranging from -271.8 for the Marcellus Shale to -51.9 for the Polish Shale. Higher molecular weight compounds like toluene (C7H8) have an average deltaD of -89.7 0/00, ranging from -156.0 for the Barnett Shale to -50.0 for the Monterey Shale. We interpret these data as representative of potential H isotope exchange between hydrocarbons and sediment pore water during formation within each basin. Since hydrocarbon H isotopes

  19. Fabrication and in vitro evaluation of a sponge-like bioactive-glass/gelatin composite scaffold for bone tissue engineering

    Energy Technology Data Exchange (ETDEWEB)

    Nadeem, Danish [Biomaterials Engineering Group, School of Oral and Dental Sciences, University of Bristol, BS1 2LY (United Kingdom); Kiamehr, Mostafa [Biomaterials and Tissue Engineering Group, Leeds Dental Institute, University of Leeds, LS2 9LU (United Kingdom); Yang, Xuebin [Biomaterials and Tissue Engineering Group, Leeds Dental Institute, University of Leeds, LS2 9LU (United Kingdom); NIHR Leeds Musculoskeletal Biomedical Research Unit, Chapel Allerton Hospital, Leeds LS7 4SA (United Kingdom); Su, Bo, E-mail: b.su@bristol.ac.uk [Biomaterials Engineering Group, School of Oral and Dental Sciences, University of Bristol, BS1 2LY (United Kingdom)

    2013-07-01

    In this work a bioactive composite scaffold, comprised of bioactive-glass and gelatin, is introduced. Through direct foaming a sponge-like composite of a sol–gel derived bioactive-glass (70S30C; 70% SiO{sub 2}, 30% CaO) and porcine gelatin was developed for use as a biodegradable scaffold for bone tissue engineering. The composite was developed to provide a suitable alternative to synthetic polymer based scaffolds, allowing directed regeneration of bone tissue. The fabricated scaffold was characterised through X-ray microtomography, scanning electron and light microscopy demonstrating a three dimensionally porous and interconnected structure, with an average pore size (170 μm) suitable for successful cell proliferation and tissue ingrowth. Acellular bioactivity was assessed through apatite formation during submersion in simulated body fluid (SBF) whereby the rate and onset of apatite nucleation was found to be comparable to that of bioactive-glass. Modification of dehydrothermal treatment parameters induced varying degrees of crosslinking, allowing the degradation of the composite to be tailored to suit specific applications and establishing its potential for a wide range of applications. Use of genipin to supplement crosslinking by dehydrothermal treatment provided further means of modifying degradability. Biocompatibility of the composite was qualified through successful cultures of human dental pulp stem cells (HDPSCs) on samples of the composite scaffold. Osteogenic differentiation of HDPSCs and extracellular matrix deposition were confirmed through positive alkaline phosphatase staining and immunohistochemistry. - Highlights: ► Optimised composition and fabrication produced sponge-like porosity (pore size ∼ 170 μm). ► Maximum aqueous stability via dehydrothermal treatment at 145 °C, for 48 h ► Biocompatibility and osteogenic potential confirmed via successful HDPSC cultures. ► Minimal toxicity exhibited in optimally crosslinked samples (10 m

  20. Influence of choice of yeasts on volatile fermentation-derived compounds, colour and phenolics composition in Cabernet Sauvignon wine.

    Science.gov (United States)

    Blazquez Rojas, Inmaculada; Smith, Paul A; Bartowsky, Eveline J

    2012-12-01

    Wine colour, phenolics and volatile fermentation-derived composition are the quintessential elements of a red wine. Many viticultural and winemaking factors contribute to wine aroma and colour with choice of yeast strain being a crucial factor. Besides the traditional Saccharomyces species S. cerevisiae, S. bayanus and several Saccharomyces interspecific hybrids are able to ferment grape juice to completion. This study examined the diversity in chemical composition, including phenolics and fermentation-derived volatile compounds, of an Australian Cabernet Sauvignon due to the use of different Saccharomyces strains. Eleven commercially available Saccharomyces strains were used in this study; S. cerevisiae (7), S. bayanus (2) and interspecific Saccharomyces hybrids (2). The eleven Cabernet Sauvignon wines varied greatly in their chemical composition. Nine yeast strains completed alcoholic fermentation in 19 days; S. bayanus AWRI 1375 in 26 days, and S. cerevisiae AWRI 1554 required 32 days. Ethanol concentrations varied in the final wines (12.7-14.2 %). The two S. bayanus strains produced the most distinct wines, with the ability to metabolise malic acid, generate high glycerol concentrations and distinctive phenolic composition. Saccharomyces hybrid AWRI 1501 and S. cerevisiae AWRI 1554 and AWRI 1493 also generated distinctive wines. This work demonstrates that the style of a Cabernet Sauvignon can be clearly modulated by choice of commercially available wine yeast.

  1. FACILE SYNTHESIS, CHARACTERIZATION AND ANTIMICROBIAL ACTIVITY OF CELLULOSE-CHITOSAN-HYDROXYAPATITE COMPOSITE MATERIAL, A POTENTIAL MATERIAL FOR BONE TISSUE ENGINEERING

    Science.gov (United States)

    Mututuvari, Tamutsiwa M.; Harkins, April L.

    2013-01-01

    Hydroxyapatite (HAp) is often used as a bone-implant material because it is biocompatible and osteoconductive. However, HAp possesses poor rheological properties and it is inactive against disease-causing microbes. To improve these properties, we developed a green method to synthesize multifunctional composites containing: (1) cellulose (CEL) to impart mechanical strength; (2) chitosan (CS) to induce antibacterial activity thereby maintaining a microbe-free wound site; and (3) HAp. In this method, CS and CEL were co-dissolved in an ionic liquid (IL) and then regenerated from water. HAp was subsequently formed in situ by alternately soaking [CEL+CS] composites in aqueous solutions of CaCl2 and Na2HPO4. At least 88% of IL used was recovered for reuse by distilling the aqueous washings of [CEL+CS]. The composites were characterized using FTIR, XRD and SEM. These composites retained the desirable properties of their constituents. For example, the tensile strength of the composites was enhanced 1.9X by increasing CEL loading from 20% to 80%. Incorporating CS in the composites resulted in composites which inhibited the growth of both Gram positive (MRSA, S. aureus and VRE) and Gram negative (E. coli and P. aeruginosa) bacteria. These findings highlight the potential use of [CEL+CS+HAp] composites as scaffolds in bone tissue engineering. PMID:23595871

  2. EPlantLIBRA: A composition and biological activity database for bioactive compounds in plant food supplements

    DEFF Research Database (Denmark)

    Plumb, J.; Lyons, J.; Nørby, Karin Kristiane

    2015-01-01

    The newly developed ePlantLIBRA database is a comprehensive and searchable database, with up-to-date coherent and validated scientific information on plant food supplement (PFS) bioactive compounds, with putative health benefits as well as adverse effects, and contaminants and residues. It is the......The newly developed ePlantLIBRA database is a comprehensive and searchable database, with up-to-date coherent and validated scientific information on plant food supplement (PFS) bioactive compounds, with putative health benefits as well as adverse effects, and contaminants and residues....... It is the only web-based database available compiling peer reviewed publications and case studies on PFS. A user-friendly, efficient and flexible interface has been developed for searching, extracting, and exporting the data, including links to the original references. Data from over 570 publications have been...... quality evaluated and entered covering 70 PFS or their botanical ingredients....

  3. Chemical composition, bioactive compounds, and volatiles of six table grape varieties (Vitis vinifera L.).

    Science.gov (United States)

    Aubert, Christophe; Chalot, Guillaume

    2018-02-01

    Six table grape cultivars (Centennial Seedless, Chasselas, Italia, Italia Rubi, Alphonse Lavallée, and Muscat de Hambourg) were analyzed for their levels of soluble solids, titratable acidity, sugars, organic acids, vitamin C and E, carotenoids, polyphenolics and volatile compounds during two successive years. Descriptive sensory analyses of the six table grape varieties were also performed. Mainly due to anthocyanins, black cultivars had the highest total phenolic contents. Alphonse Lavallée had also both the highest levels of trans-resveratrol and piceid, and Muscat de Hambourg the highest levels of α-tocopherol, β-carotene and monoterpenols, well-known key aroma compounds in Muscat varieties having also interesting pharmacological properties. This study shows that the two traditional black French cultivars, Muscat de Hambourg and Alphonse Lavallée, are particularly rich in bioactive compounds and have a great potential for human health. Finally, Muscat de Hambourg was significantly rated sweeter, juicier and more aromatic than the others cultivars. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Composition and Concentration of Phenolic Compounds of ‘Auksis’ Apple Grown on Various Rootstocks

    Directory of Open Access Journals (Sweden)

    Kviklys Darius

    2017-06-01

    Full Text Available The trial was carried out at the Institute of Horticulture, Lithuanian Research Centre for Agriculture and Forestry in 2013-2015. Cv. ‘Auksis’ was tested on 12 rootstocks: B.396, B.9, M.9, M.26, P 22, P 59, P 61, P 62, P 66, P 67, PB.4, and Pure 1. Accumulation of phenolic compounds depended on fruit yield and average fruit weight. On average, significantly lower concentration among rootstocks occurred when apple trees had abundant yield and fruits were smaller. On average chlorogenic acid constituted 50% and total procyanidins 28% of total phenols in ‘Auksis’ fruits. Flavonoid concentration most depended on rootstock and the highest variation was recorded. More than 50% difference occurred between the highest total flavonoid concentration in apples on PB.4 and the lowest on M.9 rootstocks. Low variability of total procyanidin concentration among rootstocks was observed. Differences between the highest and lowest concentration was 15%. Total concentration of phenolic compounds differed among rootstocks by 29-35% depending on the year. Differences in accumulation of phenolic compounds depended on rootstock genotype but not on yield or fruit weight. PB.4 and P 67 rootstocks had the highest, and M.9, P 62 and M.26 had the lowest concentration of total phenol in ‘Auksis’ fruits

  5. Gestational age dependent changes of the fetal brain, liver and adipose tissue fatty acid compositions in a population with high fish intakes

    NARCIS (Netherlands)

    Kuipers, Remko S.; Luxwolda, Martine F.; Offringa, Pieter J.; Boersma, E. Rudy; Dijck-Brouwer, D. A. Janneke; Muskiet, Frits A. J.

    2012-01-01

    Introduction: There are no data on the intrauterine fatty acid (FA) compositions of brain, liver and adipose tissue of infants born to women with high fish intakes. Subjects and methods: We analyzed the brain (n = 18), liver (n = 14) and adipose tissue (n = 11) FA compositions of 20 stillborn

  6. Electrospun composites of PHBV, silk fibroin and nano-hydroxyapatite for bone tissue engineering

    Energy Technology Data Exchange (ETDEWEB)

    Paşcu, Elena I.; Stokes, Joseph; McGuinness, Garrett B., E-mail: garrett.mcguinness@dcu.ie

    2013-12-01

    Electrospinning of fibrous scaffolds containing nano-hydroxyapatite (nHAp) embedded in a matrix of functional biomacromolecules offers an attractive route to mimicking the natural bone tissue architecture. Functional fibrous substrates will support cell attachment, proliferation and differentiation, while the role of HAp is to induce cells to secrete extracellular matrix (ECM) for mineralization to form bone. Electrospinning of biomaterials composed of polyhydroxybutyrate-co-(3-hydroxyvalerate) with 2% valerate fraction (PHBV), nano-hydroxyapatite (nHAp), and Bombyx mori silk fibroin essence (SF), Mw = 90KDa, has been achieved for nHAp and SF solution concentrations of 2 (w/vol) % each and 5 (w/vol) % each. The structure and properties of the nanocomposite fibrous membranes were investigated by means of Scanning Electron Microscopy in combination with Energy Dispersive X-Ray Analysis (SEM/EDX), Fourier Transformed Infrared Spectroscopy (FT-IR), uniaxial tensile and compressive mechanical testing, degradation tests and in vitro bioactivity tests. SEM images showed smooth, uniform and continuous fibre deposition with no bead formation, and fibre diameters of between 10 and 15 μm. EDX and FT-IR confirmed the presence of nHAp and SF. After one month in deionised water, tests showed less than 2% weight loss with the samples retaining their fibrous morphology, confirming that this material biodegrades slowly. After 28 days of immersion in Simulated Body Fluid (SBF) an apatite layer was visible on the surface of the fibres, proving their bioactivity. Preliminary in vitro biological assessment showed that after 1 and 3 days in culture, cells were attached to the fibres, retaining their morphology while presenting a flattened appearance and elongated shape on the surface of fibres. Young's modulus was found to increase from 0.7 kPa (± 0.33 kPa) for electrospun samples of PHBV only to 1.4 kPa (± 0.54 kPa) for samples with 2 (w/vol) % each of nHAp and SF. Samples

  7. The phenolic compounds and compositional quality of Chétoui ...

    African Journals Online (AJOL)

    The differences in the chemical composition of virgin olive oils (VOO) obtained from trees of the Chetoui variety cultivated at different altitudes in Tunisia were evaluated. All samples were harvested using the same controlled procedures and were submitted to a controlled processing in the same laboratory mill. Several ...

  8. Reaction of intermetallic compounds of the ScT composition (T=Ag, Cu, Zn, Ni) with hydrogen

    International Nuclear Information System (INIS)

    Shilkin, S.P.; Volkova, L.S.; Tarasov, B.P.

    1995-01-01

    Reaction of intermetallic compounds of ScT composition (T=Ag, Cu, Zn, Ni), crystallized in CsCl structural type, with hydrogen at 0.2-10 MPa pressure and 293-673 K temperature is studied by chemical, x-ray phase and complex thermogravimetry analysis methods. It is shown that under such conditions hydrogen absorption by ScAg and ScCu is accompanied by the decay of their source matrices into scandium dihydride and metal silver and copper respectively. For ScZn a fine-dispersion mixture of scandium dihydride with zinc and hydride phase of a new zinc-containing intermetallic compound appears to be the finite reaction product. In case of ScNi a hydride phase of ScNiH 2.6 composition is produced, which is crystallized in a rhombic syngony with the lattice periods: a=0.5281±0.0007, b=0.7393±0.0009 and c=0.3327±0.0004 nm. 9 refs.; 2 tabs

  9. Gold nanoparticle-enhanced target for MS analysis and imaging of harmful compounds in plant, animal tissue and on fingerprint.

    Science.gov (United States)

    Sekuła, Justyna; Nizioł, Joanna; Misiorek, Maria; Dec, Paulina; Wrona, Agnieszka; Arendowski, Adrian; Ruman, Tomasz

    2015-10-01

    Gold nanoparticle-enhanced target (AuNPET) was used for detailed investigation of various materials of biological origin - human fingerprint, onion bulb and chicken liver. Analysis of these objects was focused on toxic and harmful compounds - designer drug containing pentedrone, diphenylamine in onion and potentially cancerogenic metronidazole antibiotic in liver. Detection of large quantity of endogenous compounds from mentioned objects is also shown. Most of analyzed compounds were also localized with MS imaging and relationship between their function and location was discussed. Detected compounds belong to a very wide range of chemical compounds such as saccharides, ionic and non-ionic glycerides, amino acids, fatty acids, sulfides, sulfoxides, phenols etc. Fingerprint experiments demonstrate application of AuNPET for detection, structure confirmation and also co-localization of drug with ridge patterns proving person-drug contact. Copyright © 2015 Elsevier B.V. All rights reserved.

  10. Carcass characteristics and tissue composition of commercial cuts of lambs fed with banana crop residues

    Directory of Open Access Journals (Sweden)

    Tânia Dayana do Carmo

    2016-02-01

    Full Text Available The aim of this study was to evaluate the effect of substitution of Cynodon hay with banana plantation residue hay on the carcass characteristics and tissue composition of commercial cuts of feedlot Santa Inês lambs. Twenty-five whole lambs were used, with an average age of five months and an initial live weight of 26.95 kg (± 1.5, distributed in a completely randomized design with five treatments (1 = 40% Cynodon spp. hay + 60% concentrate; 2 = 20% banana leaf hay + 20% Cynodon spp. hay + 60% concentrate; 3 = 40% banana leaf hay + 60% concentrate; 4 = 20% banana pseudostem hay + 20% Cynodon spp. hay + 60% concentrate; 5 = 40% banana pseudostem hay + 60% concentrate and five repetitions. The lambs were slaughtered on day 69 of the experiment. The variables evaluated were: live weight without fasting (LWWF, live weight post-fasting (LWPF, morphometric measurements in vivo and postmortem, hot and cold carcass weights (HCW, CCW, hot and cold carcass yield (HCY, CCY, biological performance and weight loss by chilling. The carcasses were divided into eight commercial cuts: neck, shoulder, foreshank and hindshank, breast and flank, loin, leg and rack. The leg, shoulder and loin were dissected into muscle, fat and bone. The animals fed on pseudostem hay showed higher LWWF, LWPF, body length, HCW and CCW; however, the HCY, CCY, morphometric measurements and commercial cut weights and yields were not altered by the treatments. The use of pseudostem hay allows for heavier carcasses; however, the use of coproducts changed the characteristics and carcass yield of the assessed commercial cuts.

  11. Relationship between the elemental composition of grapeyards and bioactive compounds in the Cabernet Sauvignon grapes Vitis vinífera harvested in Mexico.

    Science.gov (United States)

    Acuña-Avila, Pedro Estanislao; Vásquez-Murrieta, María Soledad; Franco Hernández, Marina Olivia; López-Cortéz, Ma Del Socorro

    2016-07-15

    The red grape Vitis vinífera is an important source of phenolic compounds, which can prevent disease if included as a part of a diet. The levels of these compounds in grapes have been associated with various environmental factors, such as climate, soil composition, and biotic stress. The purpose of this study was to determine the relationship between the elemental compositions of the soil and the grapes and the presence of bioactive compounds, such as catechin, epicatechin, piceid and resveratrol. Ethanol-based extracts of red grapes were used to quantify total and individual phenolic compounds by HPLC. It was observed that the elemental compositions of the soil and the grapes were related to their locations within different wine-producing regions. A principal component analysis showed a relationship between high metal content (Sr, Mn, Si and Pb) and higher concentrations of antioxidants in the grapes. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. Proximate compositions and bioactive compounds of edible wild and cultivated mushrooms from Northeast Thailand

    Directory of Open Access Journals (Sweden)

    Amporn Srikram

    2016-11-01

    Full Text Available Mushrooms are known as an excellent source of nutrients including macronutrients and bioactive compounds. Nutritional values were investigated involving proximate analysis, total antioxidant capacity (TAC, total phenol content (TPC and total flavonoid content (TFC of 10 edible wild mushroom species—Amanita calyptroderma Ark. et al., Amanita princeps Corner et Bas, A., Astraeus odoratus, Heimiella retispora (Pat. et. Bak. Boedijn., Mycoamaranthus cambodgensis (Pat. Trappe, Russula alboareolata Hongo, Russula cyanoxantha Schaeff.ex.Fr., Russula emetic (Schaeff. ex Fr. S.F.Gray., Russula virescens (Schaeff. fr., Termitomyces clypeatus Heim—and five cultivated mushroom species—Auricularia auricula-judae, Lentinus polychrous Lev., Lentinus squarrosulus Mont., Pleurotus sajor-caju (Fr. Sing, Volvariella vovacea (Bull. Ex.Fr. Sing. From the proximate analysis, the moisture contents of both wild and cultivated mushrooms ranged from 84.15% fresh weight (FW to 90.21% FW. The ash, crude protein, fat, crude fiber and carbohydrate contents of both wild and cultivated mushrooms were in the dry weight ranges 2.56–13.96%, 11.16–50.29%, 1.43–21.94%, 2.11–38.11% and 9.56–59.73%, respectively, and the contents of macronutrients in the mushrooms varied by variety. Wild mushrooms had a high fiber content compared to cultivated mushrooms. The contents of biologically active compounds of both wild and cultivated mushrooms also varied depending on the variety. Values for the TAC, TPC and TFC of wild mushrooms were higher than those of cultivated mushrooms. In conclusion, the proximate analysis for both wild and cultivated mushrooms was variety dependent and wild mushrooms contained a higher fiber content and more biologically active compounds than cultivated mushrooms.

  13. Compound composite odontoma with unusual number of denticles – A rare entity

    Science.gov (United States)

    Sharma, Urvashi; Sharma, Rahul; Gulati, Anubha; Yadav, Renu; Gauba, Krishan

    2010-01-01

    Compound odontoma is stated to be a hamartomatous lesion rather than a true odontogenic tumour. It has an unknown etiology and often suspected when there are retained deciduous teeth in children. Early detection and surgical enucleation of the tumour is recommended to prevent impaction of unerupted teeth. In this index case, multiple denticles or rudimentary teeth, numbering 37 were enucleated from the maxillary anterior region of a 17-year old male, which makes this case unusual. Evidence of concrescence, fusion and dilaceration were observed in the denticles enucleated, the size of which varied from 4 mm to 12.5 mm. PMID:23960491

  14. Voltammetric Determination of Selected Nitro Compounds at a Polished Silver Solid Amalgam Composite Electrode

    Czech Academy of Sciences Publication Activity Database

    Vyskočil, V.; Navrátil, Tomáš; Daňhel, A.; Dědík, J.; Krejčová, Z.; Škvorová, L.; Tvrdíková, J.; Barek, J.

    2011-01-01

    Roč. 23, č. 1 (2011), s. 129-139 ISSN 1040-0397. [International Conference on Electroanalysis (ESEAC 2010) /13./. Gijón, 20.06.2010-24.06.2010] R&D Projects: GA AV ČR IAA400400806 Institutional research plan: CEZ:AV0Z40400503 Keywords : voltammetry * silver solid amalgam composite electrode * drinking water Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 2.872, year: 2011

  15. Cytotoxicity of dental composite components and mercury compounds in pulmonary cells.

    Science.gov (United States)

    Kehe, K; Reichl, F X; Durner, J; Walther, U; Hickel, R; Forth, W

    2001-02-01

    The cytotoxic potentials of the dental composite components triethyleneglycoldimethacrylate (TEGDMA) and 2-hydroxy-ethylmethacrylate (HEMA) as well as mercuric chloride (HgCl2) and methyl mercury chloride (MeHgCl) were investigated. Proliferating A549 and L2 cell monolayers were cultured in the absence or presence of composite components or mercurials. Twenty-four hours later the tetrazolium salt XTT (sodium 3'-[1-phenyl-aminocarbonyl)-3,4-tetrazolium]bis(4-methoxy-6-nitro)benzenesulphonic acid) was added. Formazan formation was quantified using a microtiter plate reader. EC50 values were obtained as half-maximum-effect concentrations from fitted curves. EC50 values were in A549 cells (mean values +/- standard deviation; n = 12; micromol/l); HEMA 8854+/-1882; TEGDMA 1821+/-529; HgCl2 41+/-7 and MeHgCl 27+/-3. EC50 values in L2 cells were: HEMA 191+/-28; TEGDMA 112+/-16; HgCl2 25+/-6 and MeHgCl 8+/-6. All tested substances induced a dose-dependent loss of viability in A549 and L2 cells after 24 h. The EC50 values of both mercurials were significantly (p < 0.05) lower compared to the values of both composite components. TEGDMA was about 5-fold (A549 cells) and about 2-fold (L2 cells) more toxic compared to HEMA. It is to be assumed that the risk of lung cell damage by dental composite components is even more unlikely.

  16. Fabrication of Wood-Rubber Composites Using Rubber Compound as a Bonding Agent Instead of Adhesives

    Directory of Open Access Journals (Sweden)

    Dongwei Shao

    2016-06-01

    Full Text Available Differing from the hot-pressing method in the manufacturing of traditional wood-rubber composites (WRCs, this study was aimed at fabricating WRCs using rubber processing to improve water resistance and mechanical properties. Three steps were used to make WRCs, namely, fiber-rubber mixing, tabletting, and the vulcanization molding process. Ninety-six WRC panels were made with wood fiber contents of 0%–50% at rotor rotational speeds of 15–45 rpm and filled coefficients of 0.55–0.75. Four regression equations, i.e., the tensile strength (Ts, elongation at break (Eb, hardness (Ha and rebound resilience (Rr as functions of fiber contents, rotational speed and filled coefficient, were derived and a nonlinear programming model were developed to obtain the optimum composite properties. Although the Ts, Eb and Rr of the panels were reduced, Ha was considerably increased by 17%–58% because of the wood fiber addition. Scanning electron microscope images indicated that fibers were well embedded in rubber matrix. The 24 h water absorption was only 1%–3%, which was much lower than commercial wood-based composites.

  17. Fabrication of Wood-Rubber Composites Using Rubber Compound as a Bonding Agent Instead of Adhesives.

    Science.gov (United States)

    Shao, Dongwei; Xu, Min; Cai, Liping; Shi, Sheldon Q

    2016-06-14

    Differing from the hot-pressing method in the manufacturing of traditional wood-rubber composites (WRCs), this study was aimed at fabricating WRCs using rubber processing to improve water resistance and mechanical properties. Three steps were used to make WRCs, namely, fiber-rubber mixing, tabletting, and the vulcanization molding process. Ninety-six WRC panels were made with wood fiber contents of 0%-50% at rotor rotational speeds of 15-45 rpm and filled coefficients of 0.55-0.75. Four regression equations, i.e. , the tensile strength ( T s), elongation at break ( E b), hardness ( H a) and rebound resilience ( R r) as functions of fiber contents, rotational speed and filled coefficient, were derived and a nonlinear programming model were developed to obtain the optimum composite properties. Although the T s, E b and R r of the panels were reduced, H a was considerably increased by 17%-58% because of the wood fiber addition. Scanning electron microscope images indicated that fibers were well embedded in rubber matrix. The 24 h water absorption was only 1%-3%, which was much lower than commercial wood-based composites.

  18. Cu-based metal–organic framework/activated carbon composites for sulfur compounds removal

    Energy Technology Data Exchange (ETDEWEB)

    Shi, Rui-Hua [State Key Laboratory of Coal Science and Technology, Co-founded by Shanxi Province and the Ministry of Science and Technology, Institute for Chemical Engineering of Coal, Taiyuan University of Technology, West Yingze Street Number 79, Taiyuan 030024 (China); Zhang, Zhen-Rong [Institute of Applied Chemical, Shanxi (China); Fan, Hui-Ling, E-mail: fanhuiling@tyut.edu.cn [State Key Laboratory of Coal Science and Technology, Co-founded by Shanxi Province and the Ministry of Science and Technology, Institute for Chemical Engineering of Coal, Taiyuan University of Technology, West Yingze Street Number 79, Taiyuan 030024 (China); Zhen, Tian [Deparment of Analysis and Service Center Micromertics instrumental Ltd, Shanghai (China); Shangguan, Ju; Mi, Jie [State Key Laboratory of Coal Science and Technology, Co-founded by Shanxi Province and the Ministry of Science and Technology, Institute for Chemical Engineering of Coal, Taiyuan University of Technology, West Yingze Street Number 79, Taiyuan 030024 (China)

    2017-02-01

    Highlights: • Incorporation of AC less than 2% in MOF-199 can increase micropores and BET surface area, as evidenced by N{sub 2} adsorption. • Lewis acid (unsaturated copper) sites could also be increased in the modified MOF-199, as revealed by Py-IR characterization. • Composite with 2% AC showed highest sulfur capacity with 8.46 and 8.53% for H{sub 2}S and CH{sub 3}SCH{sub 3}, respectively. • The adsorption of CH{sub 3}SCH{sub 3} on composite is reversible, physic-adsorption and weak chemisorption were involved. - Abstract: MOF-199 was modified by incorporating activated carbon (AC) during its synthesis under hydrothermal conditions to improve its performance in the removal of hydrogen sulfide (H{sub 2}S) and dimethyl sulfide (CH{sub 3}SCH{sub 3}). A variety of different characterization techniques including X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, nitrogen adsorption/desorption isotherms, scanning electron microscopy (SEM), pyridine adsorption infrared spectroscopy (Py-IR), thermogravimetric- mass spectroscopy (TG-MS) and X-ray photoelectron spectroscopy (XPS) were used to analyze the fresh and exhausted composites. It was found that the composites, which have an amount of AC of less than 2%, had the same morphology as those of pristine MOF-199, but exhibited a more ordered crystallinity structure as well as higher surface area. The composite with 2% AC incorporation showed highest sulfur capacity of 8.46 and 8.53% for H{sub 2}S and CH{sub 3}SCH{sub 3}, respectively, which increased by 51 and 41% compared to that of MOF-199. This improvement was attributed to the formation of more micropores and especially the increased number of unsaturated copper metal sites, as revealed by Py-IR. It is suggested the chemical reaction was apparent during adsorption of H{sub 2}S, which resulted in the formation of CuS and the collapse of the MOF structure. Whereas reversible chemisorption was found for CH{sub 3}SCH{sub 3} adsorption, as

  19. Desalination of fish sauce by electrodialysis: effect on selected aroma compounds and amino acid compositions.

    Science.gov (United States)

    Chindapan, Nathamol; Devahastin, Sakamon; Chiewchan, Naphaporn; Sablani, Shyam S

    2011-09-01

    Fish sauce is an ingredient that exhibits unique flavor and is widely used by people in Southeast Asia. Fish sauce, however, contains a significant amount of salt (sodium chloride). Recently, electrodialysis (ED) has been successfully applied to reduce salt in fish sauce; however, no information is available on the effect of ED on changes in compounds providing aroma and taste of ED-treated fish sauce. The selected aroma compounds, amino acids, and sensory quality of the ED-treated fish sauce with various salt concentrations were then analyzed. The amounts of trimethylamine, 2,6-dimethylpyrazine, phenols, and all carboxylic acids except for hexanoic acid significantly decreased, whereas benzaldehyde increased significantly when the salt removal level was higher. The amounts of all amino acids decreased with the increased salt removal level. Significant difference in flavor and saltiness intensity among ED-treated fish sauce with various salt concentrations, as assessed by a discriminative test, were observed. Information obtained in this work can serve as a guideline for optimization of a process to produce low-sodium fish sauce by ED. It also forms a basis for further in-depth sensory analysis of low-sodium fish sauce. © 2011 Institute of Food Technologists®

  20. Triacylglycerols composition and volatile compounds of virgin olive oil from Chemlali cultivar: comparison among different planting densities.

    Science.gov (United States)

    Guerfel, Mokhtar; Ben Mansour, Mohamed; Ouni, Youssef; Guido, Flamini; Boujnah, Dalenda; Zarrouk, Mokhtar

    2012-01-01

    The present study focused on the comparison the chemical composition of virgin olive oil samples obtained from fruits of the main Tunisian olive cultivar (Chemlali) grown in four planting densities (156, 100, 69, and 51 trees ha(-1)). Despite the variability in the triacylglycerols and volatile compounds composition, the quality indices (free fatty acids, peroxide value, and spectrophotometric indices K(232) and K(270)) all of the virgin olive oils samples studied met the commercial standards. Decanal was the major constituent, accounting for about 30% of the whole volatiles. Moreover, the chemical composition of the volatile fraction of the oil from fruits of trees grown at the planting density of 156, 100, and 51 trees ha(-1) was also characterised by the preeminence of 1-hexanol, while oils from fruits of trees grown at the planting density of 69 trees ha(-1) had higher content of (E)-2-hexenal (20.3%). Our results confirm that planting density is a crucial parameter that may influence the quality of olive oils.

  1. Triacylglycerols Composition and Volatile Compounds of Virgin Olive Oil from Chemlali Cultivar: Comparison among Different Planting Densities

    Directory of Open Access Journals (Sweden)

    Mokhtar Guerfel

    2012-01-01

    Full Text Available The present study focused on the comparison the chemical composition of virgin olive oil samples obtained from fruits of the main Tunisian olive cultivar (Chemlali grown in four planting densities (156, 100, 69, and 51 trees ha−1. Despite the variability in the triacylglycerols and volatile compounds composition, the quality indices (free fatty acids, peroxide value, and spectrophotometric indices K232 and K270 all of the virgin olive oils samples studied met the commercial standards. Decanal was the major constituent, accounting for about 30% of the whole volatiles. Moreover, the chemical composition of the volatile fraction of the oil from fruits of trees grown at the planting density of 156, 100, and 51 trees ha−1 was also characterised by the preeminence of 1-hexanol, while oils from fruits of trees grown at the planting density of 69 trees ha−1 had higher content of (E-2-hexenal (20.3%. Our results confirm that planting density is a crucial parameter that may influence the quality of olive oils.

  2. The design of and chronic tissue response to a composite nerve electrode with patterned stiffness

    Science.gov (United States)

    Freeberg, M. J.; Stone, M. A.; Triolo, R. J.; Tyler, D. J.

    2017-06-01

    Objective. As neural interfaces demonstrate success in chronic applications, a novel class of reshaping electrodes with patterned regions of stiffness will enable application to a widening range of anatomical locations. Patterning stiff regions and flexible regions of the electrode enables nerve reshaping while accommodating anatomical constraints of various implant locations ranging from peripheral nerves to spinal and autonomic plexi. Approach. Introduced is a new composite electrode enabling patterning of regions of various electrode mechanical properties. The initial demonstration of the composite’s capability is the composite flat interface nerve electrode (C-FINE). The C-FINE is constructed from a sandwich of patterned PEEK within layers of pliable silicone. The shape of the PEEK provides a desired pattern of stiffness: stiff across the width of the nerve to reshape the nerve, but flexible along its length to allow for bending with the nerve. This is particularly important in anatomical locations near joints or organs, and in constrained compartments. We tested pressure and volume design constraints in vitro to verify that the C-FINE can attain a safe cuff-to-nerve ratio (CNR) without impeding intraneural blood flow. We measured nerve function as well as nerve and axonal morphology following 3 month implantation of the C-FINE without wires on feline peripheral nerves in anatomically constrained areas near mobile joints and major blood vessels in both the hind and fore limbs. Main Results. In vitro inflation tests showed effective CNRs (1.93  ±  0.06) that exceeded the industry safety standard of 1.5 at an internal pressure of 20 mmHg. This is less than the 30 mmHg shown to induce loss of conduction or compromise blood flow. Implanted cats showed no changes in physiology or electrophysiology. Behavioral signs were normal suggesting healthy nerves. Motor nerve conduction velocity and compound motor action potential did not change significantly

  3. Photoactivated Composite Biomaterial for Soft Tissue Restoration in Rodents and in Humans

    OpenAIRE

    Hillel, Alexander T.; Unterman, Shimon; Nahas, Zayna; Reid, Branden; Coburn, Jeannine M.; Axelman, Joyce; Chae, Jemin J.; Guo, Qiongyu; Trow, Robert; Thomas, Andrew; Hou, Zhipeng; Lichtsteiner, Serge; Sutton, Damon; Matheson, Christine; Walker, Patricia

    2011-01-01

    Soft tissue reconstruction often requires multiple surgical procedures that can result in scars and disfiguration. Facial soft tissue reconstruction represents a clinical challenge because even subtle deformities can severely affect an individual’s social and psychological function. We therefore developed a biosynthetic soft tissue replacement composed of poly(ethylene glycol) (PEG) and hyaluronic acid (HA) that can be injected and photocrosslinked in situ with transdermal ligh...

  4. Solar-wind interactions with the moon - Nature and composition of nitrogen compounds

    Science.gov (United States)

    Mukherjee, N. R.

    1981-01-01

    The direct interaction of the solar wind with the lunar surface results in a complete absorption of the solar wind corpuscles by the lunar surface material, with no upstream bow-shock but a cavity downstream from the lunar body. The active N ions and atoms derived from the solar wind were considered in the calculation of the radicals and compounds of nitrogen in the lunar material atmosphere, where the main species escaping from the surface to the atmosphere are NO and NH3 with near-surface concentrations of 327 and 295/cu cm, respectively. While the calculated concentration of NH3 seems consistent with the sunrise concentration results of the mass spectrometer implanted on the lunar surface, there has been no report of NO detection.

  5. Hierarchical mesoporous bioactive glass/alginate composite scaffolds fabricated by three-dimensional plotting for bone tissue engineering

    International Nuclear Information System (INIS)

    Luo Yongxiang; Lode, Anja; Gelinsky, Michael; Wu Chengtie

    2013-01-01

    Constructing bioactive scaffolds with controllable architecture for bone tissue engineering and drug delivery still maintains a significant challenge. In this study, we have developed a composite material consisting of mesoporous bioactive glass (MBG) and concentrated alginate pastes for fabrication of hierarchical scaffolds by 3D plotting. The scaffold structure contains well-ordered nano-channels, micropores as well as controllable macropores beneficial for bone tissue engineering applications and drug delivery. The structural architecture of the scaffolds has been optimized by efficient designing of the plotting coordination. The effects of MBG on mechanical strength, apatite mineralization, cytocompatibility and drug delivery properties of the composite scaffolds have been systematically studied. Transmission electron microscopy, scanning electron microscopy and energy-dispersive spectrometry were used to characterize composition and microstructure of the composite scaffolds. The MBG/alginate pastes showed good processability in the 3D plotting process, in which stable MBG/alginate composite scaffolds with controllable architecture can be prepared. The incorporation of MBG particles significantly improved the mechanical properties and apatite-mineralization ability of alginate scaffolds as well as enhanced the attachment and alkaline phosphatase activity of human bone marrow-derived mesenchymal stem cells cultivated onto the scaffolds. Dexamethasone, used as a model drug, can be efficiently loaded in MBG particles and then incorporated into alginate scaffolds resulting in a more sustained release as a function of the MBG content. Our results have indicated that 3D-plotted MBG incorporated alginate scaffolds with well-ordered nano-pores, controllable large pores, and significantly improved physicochemical, biological and drug-delivery properties could be a platform for bone tissue engineering. (paper)

  6. Fabrication of Chitin/Poly(butylene succinate/Chondroitin Sulfate Nanoparticles Ternary Composite Hydrogel Scaffold for Skin Tissue Engineering

    Directory of Open Access Journals (Sweden)

    S. Deepthi

    2014-12-01

    Full Text Available Skin loss is one of the oldest and still not totally resolved problems in the medical field. Since spontaneous healing of the dermal defects would not occur, the regeneration of full thickness of skin requires skin substitutes. Tissue engineering constructs would provide a three dimensional matrix for the reconstruction of skin tissue and the repair of damage. The aim of the present work is to develop a chitin based scaffold, by blending it with poly(butylene succinate (PBS, an aliphatic, biodegradable and biocompatible synthetic polymer with excellent mechanical properties. The presence of chondroitin sulfate nanoparticles (CSnp in the scaffold would favor cell adhesion. A chitin/PBS/CSnp composite hydrogel scaffold was developed and characterized by SEM (Scanning Electron Microscope, FTIR (Fourier Transform Infrared Spectroscopy, and swelling ratio of scaffolds were analyzed. The scaffolds were evaluated for the suitability for skin tissue engineering application by cytotoxicity, cell attachment, and cell proliferation studies using human dermal fibroblasts (HDF. The cytotoxicity and cell proliferation studies using HDF confirm the suitability of the scaffold for skin regeneration. In short, these results show promising applicability of the developed chitin/PBS/CSnps ternary composite hydrogel scaffolds for skin tissue regeneration.

  7. Computational Model of Drug-Coated Balloon Delivery in a Patient-Specific Arterial Vessel with Heterogeneous Tissue Composition.

    Science.gov (United States)

    Mandal, Prashanta K; Sarifuddin; Kolachalama, Vijaya B

    2016-12-01

    Balloon angioplasty followed by local delivery of antiproliferative drugs to target tissue is increasingly being considered for the treatment of obstructive arterial disease, and yet there is much to appreciate regarding pharmacokinetics in arteries of non-uniform disease. We developed a computational model capable of simulating drug-coated balloon delivery to arteries of heterogeneous tissue composition comprising healthy tissue, as well as regions of fibrous, fibro-fatty, calcified and necrotic core lesions. Image processing using an unsupervised clustering technique was used to reconstruct an arterial geometry from a single, patient-specific color image obtained from intravascular ultrasound-derived virtual histology. Transport of free drug was modeled using a time-dependent reaction-diffusion model and the bound, immobilized drug using the time-dependent reaction equation. The governing equations representing the transport of free as well as bound drug along with a set of initial settings and boundary conditions were solved numerically using an explicit finite difference scheme that satisfied the Courant-Friedrichs-Lewy stability criterion. Our results support previous findings related to the transport and binding of drug in arteries where tissue retention is strongly dependent on local pharmacologic properties. Additionally, modeling results indicate that non-uniform disease composition leads to heterogeneous arterial drug distribution patterns, although further validation using animal studies is required to fully appreciate pharmacokinetics in disease-laden arteries.

  8. PIGMENT CONTENT AND COMPOSITION IN AUTOTROPHIC AND HETEROTROPHIC LEAF TISSUES OF AMARANTH SPECIES A. TRICOLOR L.

    Directory of Open Access Journals (Sweden)

    M. S. Gins

    2016-01-01

    Full Text Available At present there is numerous evidence of the antioxidant positive role in the defensive reaction that is capable to protect not only plants, but also humans against oxidative stress. Plant pigments such as natural dyes from leaves, flowers and fruits are known to have high antioxidant activity. Amaranth species A. tricolor L. cultivar ‘Early Splendor’ is a convenient model for the comparative studying of the formation processes of differently colored pigment composition in leaf tissues that differs in the ability to photosynthesize. Leaves of amaranth cultivar ‘Valentina’ were as a standard. The aim of the experiment was a comparative studying of the pigments content: amaranthine, chlorophyll a and b, carotenoids in the cauline leaves of amaranth cultivars ‘Valentina’ and ‘Early Splendor’, as well as in the red and green areas of the leaves. Analysis of the aqueous extract of red Early Splendor amaranth apical leaves showed the presence of betacyanin pigment - amaranthine, in the absorption spectrum in which peak was seen in the green region at 540 nm. In addition to the antioxidant amaranthine there are  also antioxidants which might be phenolic glycosides, and ascorbic acid in the extract, the total content of which is almost twice as small as in the leaves of amaranth cauline of this cultivar. Yellow fraction was found in the ethanolic extract of red leaves. Its absorption spectrum had peaks in the blue region at 445 nm and 472 nm and a shoulder at 422 nm that indicated the presence of betaxanthin, betalamic acid or carotenoids. Water-soluble antioxidants - amaranthine and ascorbic acid were found in  auline leaves of studied species. Their content in the leaves of Valentina cultivar was higher than in the leaves of cultivar ‘Early Splendor’, and the maximum level of photosynthetic pigments was found in ‘Early Splendor’ leaves. The obtained results showed that the amaranth is a promising source of pigments with the

  9. [The possibility of using the synthetic compound for the purpose of modeling of the human soft tissues in connection with the evaluation of gunshot damages].

    Science.gov (United States)

    Latyshov, I V; Vasil'ev, V A; Zaporotskova, I V; Ermakova, T A

    The necessity of using a simulator of human soft tissues for the purpose of criminalistic and forensic medical expertises is dictated by the requirements put forward by the expert practice. The objective of the present study was to develop a synthetic simulator of the human soft tissues (compound) to ensure reliability of comparative criminalistics and forensic medical studies for the evaluation of gunshot injuries. The synthetic compound was prepared by mixing up the petroleum and/or synthetic oil with a polymeric thickening agent. This procedure was followed by heating the mixture at 90 degrees Celsius during 5 hours. Thereafter, petrolatum and/or ceresin and/or paraffin were added to the mixture. At the final stage, ionol was introduced, and the mixture was poured into a mold measuring 70×70×210 mm with its subsequent cooling down to 40 degrees Celsius during 10-12 hours. The experimental shooting was effected from the Kalashnikov AKS-74U assault rifle using the 5.45×39 mm (7H6) cartridges, Makarov pistol using the 9×18 mm cartridges and Nagant pistol using the CHELP-1000 cartridges. Five shots were fired from each of the three models. The experimental gunshot damages were evaluated visually by examining the inlet and exit openings and the bullet channel. In addition, criminalistic analysis of the grooves in cartridges was carried out. The technology for the fabrication of synthetic compounds based on ethylene, propylene, and butadiene co-polymers in the combination with such low molecular weight compounds as paraffins and ceresins having a homogeneous structure makes it possible to vary the rheological and mechanical properties of the simulators of human soft tissues for the solution of diagnostic and identification problems in the framework of criminalistics and forensic medical expertises.

  10. Preparation of a biomimetic composite scaffold from gelatin/collagen and bioactive glass fibers for bone tissue engineering

    Energy Technology Data Exchange (ETDEWEB)

    Sharifi, Esmaeel; Azami, Mahmoud [Department of Tissue Engineering and Applied Cell Sciences, School of Advanced Technologies in Medicine, Tehran University of Medical Sciences, Tehran (Iran, Islamic Republic of); Kajbafzadeh, Abdol-Mohammad [Department of Tissue Engineering and Applied Cell Sciences, School of Advanced Technologies in Medicine, Tehran University of Medical Sciences, Tehran (Iran, Islamic Republic of); Pediatric Urology Research Center, Section of Tissue Engineering and Stem Cells Therapy, Department of Pediatric Urology, Children' s Hospital Medical Center, Tehran, Iran (IRI) (Iran, Islamic Republic of); Moztarzadeh, Fatollah [Department of Biomedical Engineering, Amirkabir University of Technology (Tehran Polytechnic), Tehran (Iran, Islamic Republic of); Faridi-Majidi, Reza [Department of Medical Nanotechnology, School of Advanced Technologies in Medicine, Tehran University of Medical Sciences, Tehran (Iran, Islamic Republic of); Shamousi, Atefeh; Karimi, Roya [Department of Tissue Engineering and Applied Cell Sciences, School of Advanced Technologies in Medicine, Tehran University of Medical Sciences, Tehran (Iran, Islamic Republic of); Ai, Jafar, E-mail: jafar_ai@tums.ac.ir [Department of Tissue Engineering and Applied Cell Sciences, School of Advanced Technologies in Medicine, Tehran University of Medical Sciences, Tehran (Iran, Islamic Republic of); Brain and Spinal Injury Research Center (BASIR), Imam Khomeini Hospital, Tehran University of Medical Sciences, Tehran (Iran, Islamic Republic of)

    2016-02-01

    Bone tissue is a composite material made of organic and inorganic components. Bone tissue engineering requires scaffolds that mimic bone nature in chemical and mechanical properties. This study proposes a novel method for preparing composite scaffolds that uses sub-micron bioglass fibers as the organic phase and gelatin/collagen as the inorganic phase. The scaffolds were constructed by using freeze drying and electro spinning methods and their mechanical properties were enhanced by using genipin crosslinking agent. Electron microscopy micrographs showed that the structure of composite scaffolds were porous with pore diameters of approximately 70–200 μm, this was again confirmed by mercury porosimetery. These pores are suitable for osteoblast growth. The diameters of the fibers were approximately 150–450 nm. Structural analysis confirmed the formation of desirable phases of sub-micron bioglass fibers. Cellular biocompatibility tests illustrated that scaffolds containing copper ion in the bioglass structure had more cell growth and osteoblast attachment in comparison to copper-free scaffolds. - Highlights: • Fabrication of 45S5 sub-micron bioglass fiber using electrospinning method. • Production of copper doped submicron bioglass fibers on 45S5 bioglass base by electrospinning sol gel route method. • Incorporation of bioglass/Cu-bioglass sub-micron fibers into gelatin/collagen matrix to form biomimetic composite scaffold which were non-cytotoxic according to MTT assay. • Discovering that copper can decrease the glass transition temperatures and enhance osteoblast cell adhesion and viability.

  11. Preparation and comparative characterization of keratin–chitosan and keratin–gelatin composite scaffolds for tissue engineering applications

    International Nuclear Information System (INIS)

    Balaji, S.; Kumar, Ramadhar; Sripriya, R.; Kakkar, Prachi; Ramesh, D. Vijaya; Reddy, P. Neela Kanta; Sehgal, P.K.

    2012-01-01

    We report fabrication of three dimensional scaffolds with well interconnected matrix of high porosity using keratin, chitosan and gelatin for tissue engineering and other biomedical applications. Scaffolds were fabricated using porous Keratin–Gelatin (KG), Keratin–Chitosan (KC) composites. The morphology of both KG and KC was investigated using SEM. The scaffolds showed high porosity with interconnected pores in the range of 20–100 μm. They were further tested by FTIR, DSC, CD, tensile strength measurement, water uptake and swelling behavior. In vitro cell adhesion and cell proliferation tests were carried out to study the biocompatibility behavior and their application as an artificial skin substitute. Both KG and KC composite scaffolds showed similar properties and patterns for cell proliferation. Due to rapid degradation of gelatin in KG, we found that it has limited application as compared to KC scaffold. We conclude that KC scaffold owing to its slow degradation and antibacterial properties would be a better substrate for tissue engineering and other biomedical application. Highlights: ► Extraction of reduced keratin from horn meal. ► Preparation of keratin–gelatin and keratin–chitosan composite scaffolds. ► Characterizations of the composite scaffolds. ► Comparative cytotoxicity analysis on NIH3T3 fibroblasts.

  12. Preparation and comparative characterization of keratin-chitosan and keratin-gelatin composite scaffolds for tissue engineering applications

    Energy Technology Data Exchange (ETDEWEB)

    Balaji, S.; Kumar, Ramadhar; Sripriya, R.; Kakkar, Prachi; Ramesh, D. Vijaya [Bio-products Laboratory, Biomaterial Division (India); Reddy, P. Neela Kanta [Bioorganic and Neurochemistry Department, Central Leather Research Institute, Central Leather Research Institute, Adyar, Chennai-20 (India); Sehgal, P.K., E-mail: sehgal_pk@yahoo.co.in [Bio-products Laboratory, Biomaterial Division (India)

    2012-05-01

    We report fabrication of three dimensional scaffolds with well interconnected matrix of high porosity using keratin, chitosan and gelatin for tissue engineering and other biomedical applications. Scaffolds were fabricated using porous Keratin-Gelatin (KG), Keratin-Chitosan (KC) composites. The morphology of both KG and KC was investigated using SEM. The scaffolds showed high porosity with interconnected pores in the range of 20-100 {mu}m. They were further tested by FTIR, DSC, CD, tensile strength measurement, water uptake and swelling behavior. In vitro cell adhesion and cell proliferation tests were carried out to study the biocompatibility behavior and their application as an artificial skin substitute. Both KG and KC composite scaffolds showed similar properties and patterns for cell proliferation. Due to rapid degradation of gelatin in KG, we found that it has limited application as compared to KC scaffold. We conclude that KC scaffold owing to its slow degradation and antibacterial properties would be a better substrate for tissue engineering and other biomedical application. Highlights: Black-Right-Pointing-Pointer Extraction of reduced keratin from horn meal. Black-Right-Pointing-Pointer Preparation of keratin-gelatin and keratin-chitosan composite scaffolds. Black-Right-Pointing-Pointer Characterizations of the composite scaffolds. Black-Right-Pointing-Pointer Comparative cytotoxicity analysis on NIH3T3 fibroblasts.

  13. Media Compositions for Three Dimensional Mammalian Tissue Growth Under Microgravity Culture Conditions

    Science.gov (United States)

    Goodwin, Thomas J. (Inventor)

    1998-01-01

    Normal mammalian tissue and the culturing process has been developed for the three groups of organ, structural and blood tissue. The cells are grown in vitro under microgravity culture conditions and form three dimensional cells aggregates with normal cell function. The microgravity culture conditions may be microgravity or simulated microgravity created in a horizontal rotating wall culture vessel.

  14. Media Compositions for Three-Dimensional Mammalian Tissue Growth under Microgravity Culture Conditions

    Science.gov (United States)

    Goodwin, Thomas J. (Inventor)

    1998-01-01

    Normal mammalian tissue and the culturing process has been developed for the three groups of organ, structural and blood tissue.The cells are grown in vitro under microgravity culture conditions and form three dimensional cells aggregates with normal cell function. The microgravity culture conditions may be microgravity or simulated microgravity created in a horizontal rotating wall culture vessel.

  15. Fabrication and characterization of polycaprolactone and tricalcium phosphate composites for tissue engineering applications

    Directory of Open Access Journals (Sweden)

    Shu-Hsien Huang

    2017-03-01

    Conclusion: PCL/TCP is biocompatible with hBMSCs. It not only promotes proliferation of hBMSCs but also helps to differentiate reparative hard tissue. We suggest 50% (weight PCL-containing β-TCP biocomposites as the best choice for hard tissue repair applications.

  16. Composition of phenolic compounds and antioxidant attributes of Cyclea gracillima Diels extracts

    Directory of Open Access Journals (Sweden)

    Jau-Tien Lin

    2018-01-01

    Full Text Available Cyclea gracillima Diels is a Taiwanese native medicinal herb. However, there are currently few relevant reports on its biochemical activity. In this study, the antioxidant attributes of the ethanol and hot water extracts of this herb were assayed using in vitro models, including the following: 2,2-diphenyl-1-(2,4,6-trinitrophenyl-hydrazyl radical scavenging, Trolox equivalent antioxidant capacity, reducing power, and chelating ferrous ions. The following biochemical models were also assayed: inhibition of human low density lipoprotein oxidation, inhibition of human erythrocyte hemolysis, and scavenging oxygen radicals in human blood. The composition and content of flavonoids and phenolic acids in these extracts were also analyzed. The results showed that these extracts with high polyphenol levels presented remarkable antioxidant effects in all assays, especially when extracted with ethanol. Six phenolic acids (mainly ferulic acid, sinapic acid, and syringic acid and 12 flavonoids (mainly narigenin, myricetin, naringin, and apigenin were found in these extracts.

  17. Polyacrylonitrile and cobalt-tin compounds based composite and its electrochemical properties in lithium ion batteries

    International Nuclear Information System (INIS)

    Nacimiento, Francisco; Alcantara, Ricardo; Tirado, Jose L.

    2009-01-01

    A novel composite electrode material has been prepared by easy and inexpensive route. Nanocrystalline grains of the tin-based phases CoSn 2 , CoSn and SnO 2 are embedded in an amorphous layer based on the polyacrylonitrile (PAN) polymer. Maximum reversible capacities around 600 mAh/g are observed. The PAN-based layer and the oxygen atoms contribute to stabilize the intermetallic phases upon electrochemical cycling, thus improving capacity retention. The mechanisms of the reactions are explored by using X-ray diffraction (XRD) and Moessbauer spectroscopy. In the first discharge process, the cassiterite phase is destroyed and amorphous Li y CoSn x phases are formed, while some grains of CoSn and CoSn 2 remained unaffected. Lithium-tin intermetallic phases are not detected. In the charge process, the segregation of tin-based phases into Co-rich and Co-poor regions takes place.

  18. Greener synthesis of electrospun collagen/hydroxyapatite composite fibers with an excellent microstructure for bone tissue engineering

    Science.gov (United States)

    Zhou, Yuanyuan; Yao, Hongchang; Wang, Jianshe; Wang, Dalu; Liu, Qian; Li, Zhongjun

    2015-01-01

    In bone tissue engineering, collagen/hydroxyapatite (HAP) fibrous composite obtained via electrospinning method has been demonstrated to support the cells’ adhesion and bone regeneration. However, electrospinning of natural collagen often requires the use of cytotoxic organic solvents, and the HAP crystals were usually aggregated and randomly distributed within a fibrous matrix of collagen, limiting their clinical potential. Here, an effective and greener method for the preparation of collagen/HAP composite fibers was developed for the first time, and this green product not only had 40 times higher mechanical properties than that previously reported, but also had an excellent microstructure similar to that of natural bone. By dissolving type I collagen in environmentally friendly phosphate buffered saline/ethanol solution instead of the frequently-used cytotoxic organic solvents, followed with the key step of desalination, co-electrospinning the collagen solution with the HAP sol, generates a collagen/HAP composite with a uniform and continuous fibrous morphology. Interestingly, the nano-HAP needles were found to preferentially orient along the longitudinal direction of the collagen fibers, which mimicked the nanostructure of natural bones. Based on the characterization of the related products, the formation mechanism for this novel phenomenon was proposed. After cross-linking with 1-ethyl-3-(3-dimethyl-aminopropyl)-1-carbodiimide hydrochloride/N-hydroxysuccinimide, the obtained composite exhibited a significant enhancement in mechanical properties. In addition, the biocompatibility of the obtained composite fibers was evaluated by in vitro culture of the human myeloma cells (U2-OS). Taken together, the process outlined herein provides an effective, non-toxic approach for the fabrication of collagen/HAP composite nanofibers that could be good candidates for bone tissue engineering. PMID:25995630

  19. Enhanced mechanical properties and biocompatibility of novel hydroxyapatite/TOPAS hybrid composite for bone tissue engineering applications.

    Science.gov (United States)

    Ain, Qurat Ul; Khan, Ahmad Nawaz; Nabavinia, Mahboubeh; Mujahid, Mohammad

    2017-06-01

    The bioactivity and mechanical properties of hybrid composites of hydroxyapatite (HA) in cyclic olefinic copolymer (COC) also known commercially as TOPAS are investigated, first time, for regeneration and repair of the bone tissues. HA is synthesized to obtain the spherically shaped nanoparticles in the size range of 60±20nm. Various concentrations of HA ranging from 1 to 30wt% are dispersed in TOPAS using sodium dodecyl sulfate (SDS) coupling agent for better dispersion and interaction of hydrophilic HA with hydrophobic TOPAS. Scanning electron microscope shows the uniform dispersion of HA≤10wt% in TOPAS and at higher concentrations >10wt%, agglomeration occurs in the hybrid composites. Tunable mechanical properties are achieved as the compressive modulus and strength are increased around 140% from 6.4 to 15.3MPa and 185% from 0.26 to 0.74MPa, respectively. Such increase in the mechanical properties of TOPAS is attributed to the anchoring of the polymer chains in the vicinity of HA nanoparticles owing to better dispersion and interfacial interactions. In comparison to neat TOPAS, hybrid composites of TOPAS/HA promoted the cell adhesion and proliferation significantly. The cell density and proliferation of TOPAS/HA hybrid composites is enhanced 9 and 3 folds, respectively, after 1day culturing in preosteoblasts cells. Moreover, the morphology of cells changed from spherical to flattened spread morphology demonstrating clearly the migration of the cells for the formation of interconnected cellular network. Additionally, very few dead cells are found in hybrid composites showing their cytocompatibility. Overall, the hybrid composites of TOPAS/HA exhibited superior strength and stiffness along with enhanced cytocompatibility for bone tissue engineering applications. Copyright © 2017 Elsevier B.V. All rights reserved.

  20. Greener synthesis of electrospun collagen/hydroxyapatite composite fibers with an excellent microstructure for bone tissue engineering.

    Science.gov (United States)

    Zhou, Yuanyuan; Yao, Hongchang; Wang, Jianshe; Wang, Dalu; Liu, Qian; Li, Zhongjun

    2015-01-01

    In bone tissue engineering, collagen/hydroxyapatite (HAP) fibrous composite obtained via electrospinning method has been demonstrated to support the cells' adhesion and bone regeneration. However, electrospinning of natural collagen often requires the use of cytotoxic organic solvents, and the HAP crystals were usually aggregated and randomly distributed within a fibrous matrix of collagen, limiting their clinical potential. Here, an effective and greener method for the preparation of collagen/HAP composite fibers was developed for the first time, and this green product not only had 40 times higher mechanical properties than that previously reported, but also had an excellent microstructure similar to that of natural bone. By dissolving type I collagen in environmentally friendly phosphate buffered saline/ethanol solution instead of the frequently-used cytotoxic organic solvents, followed with the key step of desalination, co-electrospinning the collagen solution with the HAP sol, generates a collagen/HAP composite with a uniform and continuous fibrous morphology. Interestingly, the nano-HAP needles were found to preferentially orient along the longitudinal direction of the collagen fibers, which mimicked the nanostructure of natural bones. Based on the characterization of the related products, the formation mechanism for this novel phenomenon was proposed. After cross-linking with 1-ethyl-3-(3-dimethyl-aminopropyl)-1-carbodiimide hydrochloride/N-hydroxysuccinimide, the obtained composite exhibited a significant enhancement in mechanical properties. In addition, the biocompatibility of the obtained composite fibers was evaluated by in vitro culture of the human myeloma cells (U2-OS). Taken together, the process outlined herein provides an effective, non-toxic approach for the fabrication of collagen/HAP composite nanofibers that could be good candidates for bone tissue engineering.

  1. Esterases as pesticide biomarkers in crayfish (Procambarus clarkii, Crustacea): tissue distribution, sensitivity to model compounds and recovery from inactivation.

    Science.gov (United States)

    Vioque-Fernández, A; de Almeida, E Alves; López-Barea, J

    2007-04-01

    The specific activities of acetyl- and butyrylcholinesterase and carboxylesterase were assayed in the digestive gland and in nervous and muscle tissues of the crayfish Procambarus clarkii. Since acetylcholinesterase prevails in nervous tissue and carboxylesterase in digestive gland, they are proposed as biomarkers. Muscle had negligible activities of all esterases, and all tissues had a low butyrylcholinesterase activity. Esterases were mostly cytosolic in digestive gland and muscle, but membrane-bound in nervous tissue; use of Triton X-100 is not recommended due to its widely diverging effects in esterase assays. Phenylmethylsulphonylfluoride inhibited acetyl- and butyrylcholinesterase in extracts from all tissues, and in digestive gland only carboxylesterase. In digestive gland, tetra[monoisopropyl]-pyrophosphorotetramide inhibited all esterases with different sensitivities, while in muscle and nervous tissue it only partially inhibited all esterases. Carbamates inhibited 100-fold more strongly than organophosphates acetyl- and butyrylcholinesterase activities. Carboxylesterase was inhibited by carbaryl and chlorpyrifos, but not by eserine and malathion. In vitro conditions to evaluate recovery from inactivation of esterases by model pesticides were established for acetylcholinesterase and carboxylesterase. The new reactivation protocol could be useful as a biomarker of pesticide exposure to differentiate between dilution-reversible inhibitions, indicating carbamate exposure, from dilution-irreversible effect, attributed to organophosphate exposure.

  2. Medicinal Plants, Effective Plant Compounds (Compositions) and their Effects on Stomach Cancer.

    Science.gov (United States)

    Aleebrahim-Dehkordy, Elahe; Nasri, Hamid; Baradaran, Azar; Nasri, Parto; Tamadon, Mohammad Reza; Hedaiaty, Mahrang; Beigrezaei, Sara; Rafieian-Kopaei, Mahmoud

    2017-01-01

    Medicinal plants have special importance around the world. Further, they have been noticed for nutrition and illness treatment such as preparation of anticancer new drugs. Therefore, a wide range of studies have been done on different plants, and their anticancer effects have been investigated. Nowadays, cancer is the most important factor of death rate in the developed and developing countries. Among them, stomach cancer is one of the most common malignancies around the world. At present, it is recognized as the fourth common cancer and the second factor of death rate due to cancer. So far, there has been wide range of effort for cancer treatment; however, in most cases, the response to the treatment has been very weak and often accompanied improper subsidiary effects. The present problems as a consequence of chemical treatment and radiotherapy and many subsidiary problems created due to their use for patients, and also, the resistance to the current treatment has motivated researchers to apply new medicines with more effect and less toxicity. The secondary metabolisms existent in the plants have an important role in the treatment of several diseases such as cancer. This study was conducted to investigate and collect scientific results for stomach cancer and to clarify the role of medicinal plants and secondary plant compounds on its treatment.

  3. Flavour compounds in tomato fruits: identification of loci and potential pathways affecting volatile composition.

    Science.gov (United States)

    Mathieu, Sandrine; Cin, Valeriano Dal; Fei, Zhangjun; Li, Hua; Bliss, Peter; Taylor, Mark G; Klee, Harry J; Tieman, Denise M

    2009-01-01

    The unique flavour of a tomato fruit is the sum of a complex interaction among sugars, acids, and a large set of volatile compounds. While it is generally acknowledged that the flavour of commercially produced tomatoes is inferior, the biochemical and genetic complexity of the trait has made breeding for improved flavour extremely difficult. The volatiles, in particular, present a major challenge for flavour improvement, being generated from a diverse set of lipid, amino acid, and carotenoid precursors. Very few genes controlling their biosynthesis have been identified. New quantitative trait loci (QTLs) that affect the volatile emissions of red-ripe fruits are described here. A population of introgression lines derived from a cross between the cultivated tomato Solanum lycopersicum and its wild relative, S. habrochaites, was characterized over multiple seasons and locations. A total of 30 QTLs affecting the emission of one or more volatiles were mapped. The data from this mapping project, combined with previously collected data on an IL population derived from a cross between S. lycopersicum and S. pennellii populations, were used to construct a correlational database. A metabolite tree derived from these data provides new insights into the pathways for the synthesis of several of these volatiles. One QTL is a novel locus affecting fruit carotenoid content on chromosome 2. Volatile emissions from this and other lines indicate that the linear and cyclic apocarotenoid volatiles are probably derived from separate carotenoid pools.

  4. Composition, distribution and risk of total fluorine, extractable organofluorine and perfluorinated compounds in Chinese teas.

    Science.gov (United States)

    Zhang, Ruobing; Zhang, Hong; Chen, Qingwu; Luo, Ji; Chai, Zhifang; Shen, Jincan

    2017-03-15

    To explore the residual characteristics of fluorine and perfluorinated compounds (PFCs) in tea, the total fluorine (TF), extractable organofluorine (EOF) and PFCs in 19 Chinese commercial teas of five categories were measured using cyclic neutron activation analysis combined with HPLC-MS/MS. The results showed that fluorine mainly existed as inorganic fluorine in teas, and identified fluorine (∑PFCs quantified as F) only accounted for 0.023-0.41% of EOF, indicating that most EOF in tea were still unknown. 50-99% of ∑PFCs in tea were short-chain (C⩽6), while perfluorooctanoic acid was the typical PFCs residual species. Less fermented teas contained significantly higher PFCs (mean, 20ng/g) than more fermented teas (3.0ng/g, p<0.01), suggesting that microbe may degrade PFCs during fermentation. The highest TF content was discovered in Hubei brick tea, which poses risk of fluorosis, whereas PFCs residues in teas caused no immediate harm. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. EFFECT OF OXIDATIVE STRESS ON HISTOARCHITECTONICS AND ELEMENTAL COMPOSITION OF BONE TISSUE OF THE VERTEBRAL BODY RATS

    Directory of Open Access Journals (Sweden)

    S. N. Lukanina

    2015-01-01

    Full Text Available This paper is concerned with study an influence of the oxidative stress on morphofunctional characteris-tics and elemental composition of bone tissue of the vertebral body rats.Material and methods. The research carried out on male rats of the Wistar line with weight 250–300 g. All rats were categorized into 4 groups with 10 ones in each: 1 – intact group; 2 and 3 – experimental groups; 4 – control group. Rats from groups 2–4 were under the development of oxidized stress which caused by daily stomach-pump injection (during fortnight with aqua suspension of synthetic glucocorticoid “Prednisolone” in dose 50 mg/kg. Through three hours after “Prednisolone” the antioxidant “Tiophan” was injected by stomach-pump (dose 100 mg/kg, which was dissolved in 0.2 ml of vegetation oil to laboratory animals from the group 2. Rats from control group got only solvent (vegetative oil 0.2 ml according the same scheme. Three hours after “Prednisolone” to rats from group 3 were injected of 0.2 ml aquaFontana. It was made for purity the experiment and standartization of manipulations, which are connected with injections into rats’ organisms. The peculiarities of structure of bone tissue of vertebra have been studied by methods of morphohystochemical analysis. The elemental composition of bone tissue was defined by atom-emission analysis method with inductive coupled plasma (spectrometer OPTIMA, code of methodics KHA: MUK.4.1.1482-03.Results. A development of glucocorticoid-induced oxidative stress results to infraction the histoarchitectonics of bone tissue of vertebra and decreasing the content of cations, which are included to the composition of active centres of pherments of antioxidant protection and prosthetic groups of proteins with an antioxidant activity. Using the antioxidant “Tiophan” proved an existence of its expressed osteoprotective properties. This can be seen from decreasing a level of resorbtion of bone tissue of

  6. Controlled surface topography regulates collective 3D migration by epithelial-mesenchymal composite embryonic tissues.

    Science.gov (United States)

    Song, Jiho; Shawky, Joseph H; Kim, YongTae; Hazar, Melis; LeDuc, Philip R; Sitti, Metin; Davidson, Lance A

    2015-07-01

    Cells in tissues encounter a range of physical cues as they migrate. Probing single cell and collective migratory responses to physically defined three-dimensional (3D) microenvironments and the factors that modulate those responses are critical to understanding how tissue migration is regulated during development, regeneration, and cancer. One key physical factor that regulates cell migration is topography. Most studies on surface topography and cell mechanics have been carried out with single migratory cells, yet little is known about the spreading and motility response of 3D complex multi-cellular tissues to topographical cues. Here, we examine the response to complex topographical cues of microsurgically isolated tissue explants composed of epithelial and mesenchymal cell layers from naturally 3D organized embryos of the aquatic frog Xenopus laevis. We control topography using fabricated micropost arrays (MPAs) and investigate the collective 3D migration of these multi-cellular systems in these MPAs. We find that the topography regulates both collective and individual cell migration and that dense MPAs reduce but do not eliminate tissue spreading. By modulating cell size through the cell cycle inhibitor Mitomycin C or the spacing of the MPAs we uncover how 3D topographical cues disrupt collective cell migration. We find surface topography can direct both single cell motility and tissue spreading, altering tissue-scale processes that enable efficient conversion of single cell motility into collective movement. Copyright © 2015 Elsevier Ltd. All rights reserved.

  7. [Lymphoid tissue of the human vermiform appendix and its cellular composition at different ages].

    Science.gov (United States)

    Shcherbakov, V V

    1980-06-01

    The lymphoid tissue of 55 human appendices has been studied beginning from 25 weeks of the intrauterine development up to 80 years of age. Most of lymphocytes have been found to include immunoglobulines of various types; in some cases alcaline phosphatase activity was evident in lymphocytes of the mantle zone of lymphatic follicles in children and grown-up persons, and lack of acidic phosphatase activity in lymphocytes make it possible to consider the appendicular lymphoid tissue as a B-dependent type of lymphoid tissue. A suggestion is made that during the intrauterine development and the early childhood the appendicular lymphocytes could settle in other lymphoid formations.

  8. Surface modification of nanofibrous polycaprolactone/gelatin composite scaffold by collagen type I grafting for skin tissue engineering

    International Nuclear Information System (INIS)

    Gautam, Sneh; Chou, Chia-Fu; Dinda, Amit K.; Potdar, Pravin D.; Mishra, Narayan C.

    2014-01-01

    In the present study, a tri-polymer polycaprolactone (PCL)/gelatin/collagen type I composite nanofibrous scaffold has been fabricated by electrospinning for skin tissue engineering and wound healing applications. Firstly, PCL/gelatin nanofibrous scaffold was fabricated by electrospinning using a low cost solvent mixture [chloroform/methanol for PCL and acetic acid (80% v/v) for gelatin], and then the nanofibrous PCL/gelatin scaffold was modified by collagen type I (0.2–1.5 wt.%) grafting. Morphology of the collagen type I-modified PCL/gelatin composite scaffold that was analyzed by field emission scanning electron microscopy (FE-SEM), showed that the fiber diameter was increased and pore size was decreased by increasing the concentration of collagen type I. Fourier transform infrared (FT-IR) spectroscopy and thermogravimetric (TG) analysis indicated the surface modification of PCL/gelatin scaffold by collagen type I immobilization on the surface of the scaffold. MTT assay demonstrated the viability and high proliferation rate of L929 mouse fibroblast cells on the collagen type I-modified composite scaffold. FE-SEM analysis of cell-scaffold construct illustrated the cell adhesion of L929 mouse fibroblasts on the surface of scaffold. Characteristic cell morphology of L929 was also observed on the nanofiber mesh of the collagen type I-modified scaffold. Above results suggest that the collagen type I-modified PCL/gelatin scaffold was successful in maintaining characteristic shape of fibroblasts, besides good cell proliferation. Therefore, the fibroblast seeded PCL/gelatin/collagen type I composite nanofibrous scaffold might be a potential candidate for wound healing and skin tissue engineering applications. - Highlights: • PCL/gelatin/collagen type I scaffold was fabricated for skin tissue engineering. • PCL/gelatin/collagen type I scaffold showed higher fibroblast growth than PCL/gelatin one. • PCL/gelatin/collagen type I might be one of the ideal scaffold for

  9. Symmetry and asymmetry of reaction time and body tissue composition of upper limbs in young female basketball players.

    Science.gov (United States)

    Poliszczuk, Tatiana; Mańkowska, Maja; Poliszczuk, Dmytro; Wiśniewski, Andrzej

    2013-01-01

    The role of psychomotor abilities and their relationship to the morphofunctional characteristics of athletes is becoming more and more emphasized in studies on the subject, especially for disciplines that require athletes to notice and to respond to signals originating in dynamically changing conditions. At the same time, athletes who perform symmetrically are more effective and less likely to sustain an injury through unilateral strain. Assessment of the degree of symmetry and asymmetry of reaction time to stimuli in the central and peripheral visual fields, and assessment of body composition of upper limbs in young female basketball players. Participants of the study comprised 17 young female basketball players. Their average age was 18.11-0.8 years. On average, they had been training basketball for 6.83-1.75 years. Body tissue composition was measured using the bioelectrical impedance method. The degree of symmetry and asymmetry of reaction time to signals in the central and peripheral visual fields were measured using the Reaction Test (RT-S1) and a modified Peripheral Perception (PP) test within the Vienna Test System. An analysis of body tissue composition of the upper right and upper left limbs found an asymmetry (p<0.01 and p<0.05) in the FAT [%], FAT MASS [kg], and FFM [kg] parameters. The values of these parameters were higher for the non-dominant arm. No statistically significant differences were found in reaction time and motor time for the dominant and non-dominant arm. A correlation was found between motor time and the FFM [kg] (r=-0.62; p<0.05) and PMM [kg] (r=-0.63; p<0.05) parameters. A significant asymmetry was found in the body tissue composition of the upper limbs. Asymmetry of reaction time was found only for signals in the peripheral visual field.

  10. The relationship between mutagenicity and chemical composition of polycyclic aromatic compounds from coal pyrolysis.

    Science.gov (United States)

    Wornat, M J; Braun, A G; Hawiger, A; Longwell, J P; Sarofim, A F

    1990-01-01

    The polycyclic aromatic compounds (PAC) produced from the pyrolysis of a bituminous coal at temperatures of 1125 to 1425 degrees K prove to be mutagenic to S. typhimurium, both in the presence and in the absence of postmitochondrial supernatant (PMS) prepared from Aroclor 1254-induced rat liver. Mutagenicity of the PAC samples measured in the absence of PMS exhibits little dependence on pyrolysis temperature; that measured in its presence is higher at the higher pyrolysis temperatures. However, because of the decrease in PAC yield as the temperature is raised, mutagenicity per mass of coal consumed falls with an increase in temperature if measured without PMS (-PMS) and peaks at an intermediate temperature of 1378 degrees K if measured with PMS (+PMS). Using a new chromatographic technique, we have split each coal-derived PAC sample into two fractions: LC1, containing PAC with alkyl and O-containing substitutions and LC2, consisting of unsubstituted PAC. Substituted (LC1) fractions show no significant +PMS mutagenicity, indicating that, as a whole, the alkylated PAC in our coal pyrolysis products are not mutagenic. Only at the higher temperatures do the substituted fractions exhibit significant -PMS mutagenicity, attributed to PAC with carbonyl or etheric functionalities. The extremely low yields of the substituted PAC under the conditions where they show some activity, however, ensure that they contribute little to overall mutagenicity. In contrast to the substituted fractions, the unsubstituted (LC2) fractions display significant mutagenicity under all conditions and appear to be responsible for virtually all of the mutagenicity in these coal-derived PAC samples. In this fraction, -PMS activity is attributed to nitrogen-containing heterocyclic aromatics. PMID:2190813

  11. Sensitive amperometric biosensor for phenolic compounds based on graphene-silk peptide/tyrosinase composite nanointerface.

    Science.gov (United States)

    Qu, Ying; Ma, Ming; Wang, Zhengguo; Zhan, Guoqing; Li, Buhai; Wang, Xian; Fang, Huaifang; Zhang, Huijuan; Li, Chunya

    2013-06-15

    New graphene-silk peptide (Gr-SP) nanosheets were prepared and successfully fabricated with tyrosinase (Tyr) as a novel biosensor for the determination of phenolic compounds. The Gr-SP nanosheets were fully characterized with transmission electron microscopy, x-ray diffraction, x-ray photoelectron spectroscopy, UV/Vis and FTIR spectra. The developed biosensors were also characterized with scanning electronic microscopy and electrochemical impedance spectroscopy. Using bisphenol A (BPA) as a model substrate in the sensing system, a number of key factors including the volume of Gr-SP-Tyr solution, the applied potential, pH values, temperature, and the Tyr/Gr-SP ratio that influence the analytical performance of the biosensor were investigated. The biosensor gave a linear response on the concentration ranges of 0.001-16.91 μM for catechol with the sensitivity of 7634 mA M(-1)cm(-2), 0.0015-21.12 μM for phenol with the sensitivity of 4082 mA M(-1)cm(-2), and 0.002-5.48 μM for BPA with the sensitivity of 2511 mA M(-1)cm(-2). The low detection limits were estimated to be 0.23, 0.35 and 0.72 nM (S/N=3) for catechol, phenol and BPA, respectively. The biosensors also exhibit good repeatability and long-term stability. The practical application of the biosensor was also demonstrated by the determination of BPA leaching from commercial plastic drinking bottles. Copyright © 2013 Elsevier B.V. All rights reserved.

  12. Core-shell nanostructured hybrid composites for volatile organic compound detection

    Directory of Open Access Journals (Sweden)

    Tung TT

    2015-08-01

    Full Text Available Tran Thanh Tung,1,2 Dusan Losic,1 Seung Jun Park,3 Jean-Francois Feller,2 TaeYoung Kim3 1School of Chemical Engineering, The University of Adelaide, North Terrace, Adelaide, SA, Australia; 2Smart Plastics Group, European University of Brittany (UEB, LIMATB-UBS, Lorient, France; 3Department of Bionanotechnology, Gachon University, Sujeong-gu, Seongnam-si, Gyeonggi-do South Korea Abstract: We report a high-performance chemiresistive sensor for detection of volatile organic compound (VOC vapors based on core-shell hybridized nanostructures of Fe3O4 magnetic nanoparticles (MNPs and poly(3,4-ethylenedioxythiophene (PEDOT-conducting polymers. The MNPs were prepared using microwave-assisted synthesis in the presence of polymerized ionic liquids (PILs, which were used as a linker to couple the MNP and PEDOT. The resulting PEDOT–PIL-modified Fe3O4 hybrids were then explored as a sensing channel material for a chemiresistive sensor to detect VOC vapors. The PEDOT–PIL-modified Fe3O4 sensor exhibited a tunable response, with high sensitivity (down to a concentration of 1 ppm and low noise level, to VOCs; these VOCs include acetone vapor, which is present in the exhaled breath of potential lung cancer patients. The present sensor, based on the hybrid nanostructured sensing materials, exhibited a 38.8% higher sensitivity and an 11% lower noise level than its PEDOT–PIL-only counterpart. This approach of embedding MNPs in conducting polymers could lead to the development of new electronic noses, which have significant potential for the use in the early diagnosis of lung cancer via the detection of VOC biomarkers. Keywords: hybrid nanomaterials, nanoparticle, conducting polymer, electronic nose, lung cancer detection

  13. The overlaying oil type influences in vitro embryo production: differences in composition and compound transfer into incubation medium between oils.

    Science.gov (United States)

    Martinez, Cristina A; Nohalez, Alicia; Parrilla, Inmaculada; Motas, Miguel; Roca, Jordi; Romero, Inmaculada; García-Gonza Lez, Diego L; Cuello, Cristina; Rodriguez-Martinez, Heriberto; Martinez, Emilio A; Gil, Maria A

    2017-09-05

    The oil overlay micro-drop system is widely used for cultures of mammalian gametes and embryos. We evaluated hereby the effects of two unaltered commercial oils- Sigma mineral oil (S-MO) and Nidoil paraffin oil (N-PO)-on in vitro embryo production (IVP) outcomes using a pig model. The results showed that while either oil apparently did not affect oocyte maturation and fertilization rates, S-MO negatively affected embryo cleavage rates, blastocyst formation rates, and, consequently, total blastocyst efficiency of the system. No differences in the oxidation state were found between the oils or culture media incubated under S-MO or N-PO. Although both oils slightly differed in elemental composition, there were no differences in the concentrations of elements between fresh media and media incubated under oils. By contrast, we demonstrated clear oil-type differences in both the composition of volatile organic compounds (VOC) and the transfer of some of these VOC´s (straight-chain alkanes and pentanal and 1,3-diethyl benzene) to the culture medium, which could have influenced embryonic development.

  14. Amperometric Biosensor Based on Zirconium Oxide/Polyethylene Glycol/Tyrosinase Composite Film for the Detection of Phenolic Compounds

    Directory of Open Access Journals (Sweden)

    Nor Monica Ahmad

    2016-06-01

    Full Text Available A phenolic biosensor based on a zirconium oxide/polyethylene glycol/tyrosinase composite film for the detection of phenolic compounds has been explored. The formation of the composite film was expected via electrostatic interaction between hexacetyltrimethylammonium bromide (CTAB, polyethylene glycol (PEG, and zirconium oxide nanoparticles casted on screen printed carbon electrode (SPCE. Herein, the electrode was treated by casting hexacetyltrimethylammonium bromide on SPCE to promote a positively charged surface. Later, zirconium oxide was mixed with polyethylene glycol and the mixture was dropped cast onto the positively charged SPCE/CTAB. Tyrosinase was further immobilized onto the modified SPCE. Characterization of the prepared nanocomposite film and the modified SPCE surface was investigated by scanning electron microscopy (SEM, Electrochemical Impedance Spectroscopy (EIS, and Cyclic voltamogram (CV. The developed biosensor exhibits rapid response for less than 10 s. Two linear calibration curves towards phenol in the concentrations ranges of 0.075–10 µM and 10–55 µM with the detection limit of 0.034 µM were obtained. The biosensor shows high sensitivity and good storage stability for at least 30 days.

  15. Differential effects of diet composition and timing of feeding behavior on rat brown adipose tissue and skeletal muscle peripheral clocks

    Directory of Open Access Journals (Sweden)

    Paul de Goede

    2018-01-01

    Full Text Available The effects of feeding behavior and diet composition, as well as their possible interactions, on daily (clock gene expression rhythms have mainly been studied in the liver, and to a lesser degree in white adipose tissue (WAT, but hardly in other metabolic tissues such as skeletal muscle (SM and brown adipose tissues (BAT. We therefore subjected male Wistar rats to a regular chow or free choice high-fat-high sugar (fcHFHS diet in combination with time restricted feeding (TRF to either the light or dark phase. In SM, all tested clock genes lost their rhythmic expression in the chow light fed group. In the fcHFHS light fed group rhythmic expression for some, but not all, clock genes was maintained, but shifted by several hours. In BAT the daily rhythmicity of clock genes was maintained for the light fed groups, but expression patterns were shifted as compared with ad libitum and dark fed groups, whilst the fcHFHS diet made the rhythmicity of clock genes become more pronounced. Most of the metabolic genes in BAT tissue tested did not show any rhythmic expression in either the chow or fcHFHS groups. In SM Pdk4 and Ucp3 were phase-shifted, but remained rhythmically expressed in the chow light fed groups. Rhythmic expression was lost for Ucp3 whilst on the fcHFHS diet during the light phase. In summary, both feeding at the wrong time of day and diet composition disturb the peripheral clocks in SM and BAT, but to different degrees and thereby result in a further desynchronization between metabolically active tissues such as SM, BAT, WAT and liver.

  16. Variations in stomach contents and biochemical composition of tissues in some marine fishes

    Digital Repository Service at National Institute of Oceanography (India)

    Jacob, P.G.; Rajagopal, M.D.

    Relationship between calorific values and protein, fat and carbohydrate of the stomach contents (food) and body tissues of marine fishes, Sardinella longiceps, Valenciennes, Rastrelliger kanagurta (Cuvier), Otolithus ruber (Schneider) and Lactarius...

  17. Altered Protein Composition of Subcutaneous Adipose Tissue in Chronic Kidney Disease

    Directory of Open Access Journals (Sweden)

    Joanna Gertow

    2017-11-01

    Discussion: These findings demonstrate that adipose tissue of CKD patients shows signs of inflammation and disturbed functionality, thus potentially contributing to the unfavorable metabolic profile and increased risk of CVD in these patients.

  18. New Coll–HA/BT composite materials for hard tissue engineering

    Energy Technology Data Exchange (ETDEWEB)

    Zanfir, Andrei Vlad [Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Material Science, “Politehnica” University of Bucharest, 1-7 Gh. Polizu Street, RO-011061 Bucharest (Romania); Voicu, Georgeta, E-mail: getav2001@yahoo.co.uk [Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Material Science, “Politehnica” University of Bucharest, 1-7 Gh. Polizu Street, RO-011061 Bucharest (Romania); Busuioc, Cristina; Jinga, Sorin Ion [Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Material Science, “Politehnica” University of Bucharest, 1-7 Gh. Polizu Street, RO-011061 Bucharest (Romania); Albu, Madalina Georgiana [Department of Collagen, Branch of Leather and Footwear Research, National Institute of Research and Development for Textile and Leather, 93 I. Minulescu Street, RO-031215 Bucharest (Romania); Iordache, Florin [Department of Fetal and Adult Stem Cell Therapy, “Nicolae Simionescu” Institute of Cellular Biology and Pathology of Romanian Academy, 8 B.P. Hasdeu Street, RO-050568 Bucharest (Romania)

    2016-05-01

    The integration of ceramic powders in composite materials for bone scaffolds can improve the osseointegration process. This work was aimed to the synthesis and characterization of new collagen–hydroxyapatite/barium titanate (Coll–HA/BT) composite materials starting from barium titanate (BT) nanopowder, hydroxyapatite (HA) nanopowder and collagen (Coll) gel. BT nanopowder was produced by combining two wet-chemical approaches, sol–gel and hydrothermal methods. The resulting materials were characterized in terms of phase composition and microstructure by X-ray diffraction, Raman spectroscopy, scanning electron microscopy and transmission electron microscopy. Moreover, the biocompatibility and bioactivity of the composite materials were assessed by in vitro tests. The synthesized BT particles exhibit an average size of around 35 nm and a spherical morphology, with a pseudo-cubic or tetragonal symmetry. The diffraction spectra of Coll–HA and Coll–HA/BT composite materials indicate a pronounced interaction between Col and the mineral phases, meaning a good mineralization of Col fibres. As well, the in vitro tests highlight excellent osteoinductive properties for all biological samples, especially for Coll–HA/BT composite materials, fact that can be attributed to the ferromagnetic properties of BT. - Highlights: • Collagen–hydroxyapatite/barium titanate composite materials were synthesized. • Barium titanate was produced by combining the sol–gel and hydrothermal methods. • The in vitro tests highlight excellent osteoinductive properties for all samples.

  19. A review of fibrin and fibrin composites for bone tissue engineering.

    Science.gov (United States)

    Noori, Alireza; Ashrafi, Seyed Jamal; Vaez-Ghaemi, Roza; Hatamian-Zaremi, Ashraf; Webster, Thomas J

    2017-01-01

    Tissue engineering has emerged as a new treatment approach for bone repair and regeneration seeking to address limitations associated with current therapies, such as autologous bone grafting. While many bone tissue engineering approaches have traditionally focused on synthetic materials (such as polymers or hydrogels), there has been a lot of excitement surrounding the use of natural materials due to their biologically inspired properties. Fibrin is a natural scaffold formed following tissue injury that initiates hemostasis and provides the initial matrix useful for cell adhesion, migration, proliferation, and differentiation. Fibrin has captured the interest of bone tissue engineers due to its excellent biocompatibility, controllable biodegradability, and ability to deliver cells and biomolecules. Fibrin is particularly appealing because its precursors, fibrinogen, and thrombin, which can be derived from the patient's own blood, enable the fabrication of completely autologous scaffolds. In this article, we highlight the unique properties of fibrin as a scaffolding material to treat bone defects. Moreover, we emphasize its role in bone tissue engineering nanocomposites where approaches further emulate the natural nanostructured features of bone when using fibrin and other nanomaterials. We also review the preparation methods of fibrin glue and then discuss a wide range of fibrin applications in bone tissue engineering. These include the delivery of cells and/or biomolecules to a defect site, distributing cells, and/or growth factors throughout other pre-formed scaffolds and enhancing the physical as well as biological properties of other biomaterials. Thoughts on the future direction of fibrin research for bone tissue engineering are also presented. In the future, the development of fibrin precursors as recombinant proteins will solve problems associated with using multiple or single-donor fibrin glue, and the combination of nanomaterials that allow for the

  20. Ultrasound Imaging Techniques for Spatiotemporal Characterization of Composition, Microstructure, and Mechanical Properties in Tissue Engineering.

    Science.gov (United States)

    Deng, Cheri X; Hong, Xiaowei; Stegemann, Jan P

    2016-08-01

    Ultrasound techniques are increasingly being used to quantitatively characterize both native and engineered tissues. This review provides an overview and selected examples of the main techniques used in these applications. Grayscale imaging has been used to characterize extracellular matrix deposition, and quantitative ultrasound imaging based on the integrated backscatter coefficient has been applied to estimating cell concentrations and matrix morphology in tissue engineering. Spectral analysis has been employed to characterize the concentration and spatial distribution of mineral particles in a construct, as well as to monitor mineral deposition by cells over time. Ultrasound techniques have also been used to measure the mechanical properties of native and engineered tissues. Conventional ultrasound elasticity imaging and acoustic radiation force imaging have been applied to detect regions of altered stiffness within tissues. Sonorheometry and monitoring of steady-state excitation and recovery have been used to characterize viscoelastic properties of tissue using a single transducer to both deform and image the sample. Dual-mode ultrasound elastography uses separate ultrasound transducers to produce a more potent deformation force to microscale characterization of viscoelasticity of hydrogel constructs. These ultrasound-based techniques have high potential to impact the field of tissue engineering as they are further developed and their range of applications expands.

  1. Non-invasive optical estimate of tissue composition to differentiate malignant from benign breast lesions: A pilot study

    Science.gov (United States)

    Taroni, Paola; Paganoni, Anna Maria; Ieva, Francesca; Pifferi, Antonio; Quarto, Giovanna; Abbate, Francesca; Cassano, Enrico; Cubeddu, Rinaldo

    2017-01-01

    Several techniques are being investigated as a complement to screening mammography, to reduce its false-positive rate, but results are still insufficient to draw conclusions. This initial study explores time domain diffuse optical imaging as an adjunct method to classify non-invasively malignant vs benign breast lesions. We estimated differences in tissue composition (oxy- and deoxyhemoglobin, lipid, water, collagen) and absorption properties between lesion and average healthy tissue in the same breast applying a perturbative approach to optical images collected at 7 red-near infrared wavelengths (635-1060 nm) from subjects bearing breast lesions. The Discrete AdaBoost procedure, a machine-learning algorithm, was then exploited to classify lesions based on optically derived information (either tissue composition or absorption) and risk factors obtained from patient’s anamnesis (age, body mass index, familiarity, parity, use of oral contraceptives, and use of Tamoxifen). Collagen content, in particular, turned out to be the most important parameter for discrimination. Based on the initial results of this study the proposed method deserves further investigation.

  2. The fabrication of iron oxide nanoparticle-nanofiber composites by electrospinning and their applications in tissue engineering.

    Science.gov (United States)

    Mortimer, Chris J; Wright, Chris J

    2017-07-01

    This paper reviews the use of iron oxide nanoparticle-nanofiber composites in tissue engineering with a focus on the electrospinning technique. Electrospinning is an established method of scaffold fabrication offering a number of key advantages which include its facile nature, with electrospun materials offering a high surface area to volume ratio, potential for the release of drugs and antimicrobials, controllable fiber diameters and high porosity and permeability. A number of different techniques for the preparation of iron oxide nanoparticles including their functionalization are discussed along with their applications in the biomedical field. The review then focusses on the fabrication of nanoparticle-nanofiber composite scaffolds formed using electrospinning. The advantages and disadvantages of current fabrication techniques are discussed including the fabrication of nanofibers using pre-synthesized nanoparticles and post-treatment synthesized nanoparticles. We demonstrate that emerging in-situ synthesis techniques show promise by offering a reduced number of steps and simpler procedures for the production of magnetic scaffolds. These scaffolds have a number of applications in tissue engineering, allowing for improved bone and tissue repair. Copyright © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. In Vitro Degradation of PHBV Scaffolds and nHA/PHBV Composite Scaffolds Containing Hydroxyapatite Nanoparticles for Bone Tissue Engineering

    Directory of Open Access Journals (Sweden)

    Naznin Sultana

    2012-01-01

    Full Text Available This paper investigated the long-term in vitro degradation properties of scaffolds based on biodegradable polymers and osteoconductive bioceramic/polymer composite materials for the application of bone tissue engineering. The three-dimensional porous scaffolds were fabricated using emulsion-freezing/freeze-drying technique using poly(hydroxybutyrate-co-hydroxyvalerate (PHBV which is a natural biodegradable and biocompatible polymer. Nanosized hydroxyapatite (nHA particles were successfully incorporated into the PHBV scaffolds to render the scaffolds osteoconductive. The PHBV and nHA/PHBV scaffolds were systematically evaluated using various techniques in terms of mechanical strength, porosity, porous morphology, and in vitro degradation. PHBV and nHA/PHBV scaffolds degraded over time in phosphate-buffered saline at 37°C. PHBV polymer scaffolds exhibited slow molecular weight loss and weight loss in the in vitro physiological environment. Accelerated weight loss was observed in nHA incorporated PHBV composite scaffolds. An increasing trend of crystallinity was observed during the initial period of degradation time. The compressive properties decreased more than 40% after 5-month in vitro degradation. Together with interconnected pores, high porosity, suitable mechanical properties, and slow degradation profile obtained from long-term degradation studies, the PHBV scaffolds and osteoconductive nHA/PHBV composite scaffolds showed promises for bone tissue engineering application.

  4. Bioceramic/Poly (glycolic-poly (lactic acid composite induces mineralized barrier after direct capping of rat tooth pulp tissue

    Directory of Open Access Journals (Sweden)

    Alfonso Gala-Garcia

    2010-03-01

    Full Text Available The aim of this study was to observe the histopathological pulp response following direct pulp capping of mechanically exposed teeth in rats with a composite of beta-tricalcium phosphate-hydroxyapatite bioceramic (BC and poly (glycolic-poly (lactic acid (PLGA material or a calcium hydroxide [Ca(OH2] material, compared to BC alone and a negative control of water. Pulp of the maxillary molars was exposed, followed by capping with the experimental material. The pulpal tissue response was assessed post-operatively at 1, 7, 14 and 30 d, followed by histological analysis. The Ca(OH2 group exhibited severe acute inflammatory cell infiltration at day 14. However after 30 d, a new hard tissue with macro porous obliteration of the pulp chamber and a characteristic necrotic area had appeared. BC and Ca(OH2 capping were associated with moderate inflammation and dentinal bridge similar. Meanwhile, in the BC/PLGA composite group, there was moderate inflammatory infiltrate and formation of a dense and complete dentinal bridge. In conclusion, the BC/PLGA composite material showed a large zone of tertiary dentin, and effectively reorganized the dentin-pulp complex.

  5. Preparation and biological properties of a novel composite scaffold of nano-hydroxyapatite/chitosan/carboxymethyl cellulose for bone tissue engineering

    Directory of Open Access Journals (Sweden)

    Chengdong Xiong

    2009-07-01

    Full Text Available Abstract In this study, we report the physico-chemical and biological properties of a novel biodegradable composite scaffold made of nano-hydroxyapatite and natural derived polymers of chitosan and carboxymethyl cellulose, namely, n-HA/CS/CMC, which was prepared by freeze-drying method. The physico-chemical properties of n-HA/CS/CMC scaffold were tested by infrared absorption spectra (IR, transmission electron microscope(TEM, scanning electron microscope(SEM, universal material testing machine and phosphate buffer solution (PBS soaking experiment. Besides, the biological properties were evaluated by MG63 cells and Mesenchymal stem cells (MSCs culture experiment in vitro and a short period implantation study in vivo. The results show that the composite scaffold is mainly formed through the ionic crossing-linking of the two polyions between CS and CMC, and n-HA is incorporated into the polyelectrolyte matrix of CS-CMC without agglomeration, which endows the scaffold with good physico-chemical properties such as highly interconnected porous structure, high compressive strength and good structural stability and degradation. More important, the results of cells attached, proliferated on the scaffold indicate that the scaffold is non-toxic and has good cell biocompatibility, and the results of implantation experiment in vivo further confirm that the scaffold has good tissue biocompatibility. All the above results suggest that the novel degradable n-HA/CS/CMC composite scaffold has a great potential to be used as bone tissue engineering material.

  6. A New Class of Ternary Compound for Lithium-Ion Battery: from Composite to Solid Solution.

    Science.gov (United States)

    Wang, Jiali; Wu, Hailong; Cui, Yanhua; Liu, Shengzhou; Tian, Xiaoqing; Cui, Yixiu; Liu, Xiaojiang; Yang, Yin

    2018-02-14

    Searching for high-performance cathode materials is a crucial task to develop advanced lithium-ion batteries (LIBs) with high-energy densities for electrical vehicles (EVs). As a promising lithium-rich material, Li 2 MnO 3 delivers high capacity over 200 mAh g -1 but suffers from poor structural stability and electronic conductivity. Replacing Mn 4+ ions by relatively larger Sn 4+ ions is regarded as a possible strategy to improve structural stability and thus cycling performance of Li 2 MnO 3 material. However, large difference in ionic radii of Mn 4+ and Sn 4+ ions leads to phase separation of Li 2 MnO 3 and Li 2 SnO 3 during high-temperature synthesis. To prepare solid-solution phase of Li 2 MnO 3 -Li 2 SnO 3 , a buffer agent of Ru 4+ , whose ionic radius is in between that of Mn 4+ and Sn 4+ ions, is introduced to assist the formation of a single solid-solution phase. The results show that the Li 2 RuO 3 -Li 2 MnO 3 -Li 2 SnO 3 ternary system evolves from mixed composite phases into a single solid-solution phase with increasing Ru content. Meanwhile, discharge capacity of this ternary system shows significantly increase at the transformation point which is ascribed to the improvement of Li + /e - transportation kinetics and anionic redox chemistry for solid-solution phase. The role of Mn/Sn molar ratio of Li 2 RuO 3 -Li 2 MnO 3 -Li 2 SnO 3 ternary system has also been studied. It is revealed that higher Sn content benefits cycling stability of the system because Sn 4+ ions with larger sizes could partially block the migration of Mn 4+ and Ru 4+ from transition metal layer to Li layer, thus suppressing structural transformation of the system from layered-to-spinel phase. These findings may enable a new route for exploring ternary or even quaternary lithium-rich cathode materials for LIBs.

  7. Changes in some nitrogenous compounds in the blood and tissues of freshwater pikeperch (Sander lucioperca) during salinity acclimation.

    Science.gov (United States)

    Sadok, S; M'Hetli, M; El Abed, A; Uglow, R F

    2004-05-01

    The effect of ambient salinity changes (0.9, 6 and 12 psu) on the levels of dissolved ammonia (DA), ninhydrin positive substances (NPS), trimethylamine (TMA) and trimethylamine oxide (TMAO) in the blood and tissue of medium-acclimated Sander lucioperca L. (also Stizostedion lucioperca) were investigated. In freshwater, blood and tissue total free amino acid levels (measured as NPS) were 3.62 mM and 60.61 mM, respectively. The NPS content increased significantly (P<0.05) in the tissue and blood on acclimation to 6 and 12 psu salinities. The mass-specific tissue TMAO concentration of pikeperch acclimated to normal freshwater was 0.413+/-0.084 micromol TMAO g(-1). Results reveal that TMAO levels are positively influenced by the external salinity medium where significant differences in mean levels occurred between the groups (P<0.05). The calculated p[NH(3)] and [NH(4)(+)] gradients reveal that the [NH(3)] gradient was consistently low (cf. the [NH(4)(+)] gradient). The gradient of p[NH(3)] decreased with the medium increased salinities. The results suggest that freshwater pikeperch may be able to resist salinity changes by manipulation of nitrogen metabolism. Free amino acids and TMAO are involved in mediating response to salinity exposure in freshwater pikeperch.

  8. Determination of temperature dependence of the production of volatile organic compounds (VOCs) during the vaporization of tissue using Nd:YAG laser, CO2 laser, and electrosurgery devices

    Science.gov (United States)

    Waesche, Wolfgang; Albrecht, Hansjoerg; Mueller, Gerhard J.

    1995-01-01

    Reactions of biological tissues treated with either laser or electrosurgery devices are mainly governed by the temperature field in the area of treatment. The dependence of the emission rate of volatile organic compounds (VOC) on the temperature of the reaction zone was determined in vitro for these devices. Different kinds of tissue (porcine liver, muscle and skin) were vaporized under standard conditions. Power settings of a Nd:YAG laser and a CO2 laser and those of an electrocauter were varied in different measurements. The temperature development in the area of treatment was determined with a thermocamera. VOCs were collected simultaneously under realistic conditions during the treatment. The samples were evaluated and analyzed using a multisorbent sampler and capillary gas chromatograph system (GC).

  9. The Growth of Brown Adipose Tissue in Cold-acclimatized Rats after Depletion of Mast Cell Histamine by Compound 48/80

    Directory of Open Access Journals (Sweden)

    Daló Nelson L

    1998-01-01

    Full Text Available Cold acclimatization (4-5°C is accompanied by 2-3 fold increase of brown adipose tissue (BAT. This rapid growth of interscapular BAT was studied after histamine depletion. In control rats maintained at room temperature (28 ± 2°C the BAT histamine content was 23.4 ± 5.9 (mean ± SD µg/g of tissue and cold acclimatization (5±1°C produced a significant increase of BAT weight, but reduced the histamine content to 8.4 ± 1.9 µg/g. The total weight of BAT after 20 days of acclimatization was unaffected by depletion of histamine due to compound 48/80. The low level of histamine in BAT of cold acclimatized rats could be due to a fast rate of amine utilization; alternatively an altered synthesis or storage process may occur during acclimatization.

  10. A review of fibrin and fibrin composites for bone tissue engineering

    Directory of Open Access Journals (Sweden)

    Noori A

    2017-07-01

    Full Text Available Alireza Noori,1 Seyed Jamal Ashrafi,2 Roza Vaez-Ghaemi,3 Ashraf Hatamian-Zaremi,4 Thomas J Webster5 1Department of Tissue Engineering and Applied Cell Sciences, Faculty of Advanced Technologies in Medicine, Tehran University of Medical Sciences, Tehran, 2School of Medicine, Shahroud University of Medical Sciences, Shahroud, Iran; 3Department of Chemical and Biological Engineering, Faculty of Biomedical Engineering, The University of British Columbia, Vancouver, BC, Canada; 4Faculty of New Sciences and Technologies, University of Tehran, Tehran, Iran; 5Department of Chemical Engineering, Northeastern University, Boston, MA, USA Abstract: Tissue engineering has emerged as a new treatment approach for bone repair and regeneration seeking to address limitations associated with current therapies, such as autologous bone grafting. While many bone tissue engineering approaches have traditionally focused on synthetic materials (such as polymers or hydrogels, there has been a lot of excitement surrounding the use of natural materials due to their biologically inspired properties. Fibrin is a natural scaffold formed following tissue injury that initiates hemostasis and provides the initial matrix useful for cell adhesion, migration, proliferation, and differentiation. Fibrin has captured the interest of bone tissue engineers due to its excellent biocompatibility, controllable biodegradability, and ability to deliver cells and biomolecules. Fibrin is particularly appealing because its precursors, fibrinogen, and thrombin, which can be derived from the patient’s own blood, enable the fabrication of completely autologous scaffolds. In this article, we highlight the unique properties of fibrin as a scaffolding material to treat bone defects. Moreover, we emphasize its role in bone tissue engineering nanocomposites where approaches further emulate the natural nanostructured features of bone when using fibrin and other nanomaterials. We also review the

  11. Composite Match Index with Application of Interior Deformation Field Measurement from Magnetic Resonance Volumetric Images of Human Tissues

    Directory of Open Access Journals (Sweden)

    Penglin Zhang

    2012-01-01

    Full Text Available Whereas a variety of different feature-point matching approaches have been reported in computer vision, few feature-point matching approaches employed in images from nonrigid, nonuniform human tissues have been reported. The present work is concerned with interior deformation field measurement of complex human tissues from three-dimensional magnetic resonance (MR volumetric images. To improve the reliability of matching results, this paper proposes composite match index (CMI as the foundation of multimethod fusion methods to increase the reliability of these various methods. Thereinto, we discuss the definition, components, and weight determination of CMI. To test the validity of the proposed approach, it is applied to actual MR volumetric images obtained from a volunteer’s calf. The main result is consistent with the actual condition.

  12. Intervertebral Disc Tissue Engineering with Natural Extracellular Matrix-Derived Biphasic Composite Scaffolds.

    Directory of Open Access Journals (Sweden)

    Baoshan Xu

    Full Text Available Tissue engineering has provided an alternative therapeutic possibility for degenerative disc diseases. However, we lack an ideal scaffold for IVD tissue engineering. The goal of this study is to fabricate a novel biomimetic biphasic scaffold for IVD tissue engineering and evaluate the feasibility of developing tissue-engineered IVD in vitro and in vivo. In present study we developed a novel integrated biphasic IVD scaffold using a simple freeze-drying and cross-linking technique of pig bone matrix gelatin (BMG for the outer annulus fibrosus (AF phase and pig acellular cartilage ECM (ACECM for the inner nucleus pulposus (NP phase. Histology and SEM results indicated no residual cells remaining in the scaffold that featured an interconnected porous microstructure (pore size of AF and NP phase 401.4 ± 13.1 μm and 231.6 ± 57.2 μm, respectively. PKH26-labeled AF and NP cells were seeded into the scaffold and cultured in vitro. SEM confirmed that seeded cells could anchor onto the scaffold. Live/dead staining showed that live cells (green fluorescence were distributed in the scaffold, with no dead cells (red fluorescence being found. The cell-scaffold constructs were implanted subcutaneously into nude mice and cultured for 6 weeks in vivo. IVD-like tissue formed in nude mice as confirmed by histology. Cells in hybrid constructs originated from PKH26-labeled cells, as confirmed by in vivo fluorescence imaging system. In conclusion, the study demonstrates the feasibility of developing a tissue-engineered IVD in vivo with a BMG- and ACECM-derived integrated AF-NP biphasic scaffold. As well, PKH26 fluorescent labeling with in vivo fluorescent imaging can be used to track cells and analyse cell--scaffold constructs in vivo.

  13. Metabolomic profile and nucleoside composition of Cordyceps nidus sp. nov. (Cordycipitaceae: A new source of active compounds.

    Directory of Open Access Journals (Sweden)

    Juan Chiriví

    Full Text Available Cordyceps sensu lato is a genus of arthropod-pathogenic fungi, which have been used traditionally as medicinal in Asia. Within the genus, Ophiocordyceps sinensis is the most coveted and expensive species in China. Nevertheless, harvesting wild specimens has become a challenge given that natural populations of the fungus are decreasing and because large-scale culture of it has not yet been achieved. The worldwide demand for products derived from cultivable fungal species with medicinal properties has increased recently. In this study, we propose a new species, Cordyceps nidus, which parasitizes underground nests of trapdoor spiders. This species is phylogenetically related to Cordyceps militaris, Cordyceps pruinosa, and a sibling species of Cordyceps caloceroides. It is found in tropical rainforests from Bolivia, Brazil, Colombia and Ecuador. We also investigated the medicinal potential of this fungus based on its biochemical properties when grown on four different culture media. The metabolic profile particularly that of nucleosides, in polar and non-polar extracts was determined by UPLC, and then correlated to their antimicrobial activity and total phenolic content. The metabolome showed a high and significant dependency on the substrate used for fungal growth. The mass intensities of nucleosides and derivative compounds were higher in natural culture media in comparison to artificial culture media. Among these compounds, cordycepin was the predominant, showing the potential use of this species as an alternative to O. sinensis. Furthermore, methanol fractions showed antimicrobial activity against gram-positive bacteria, and less than 3.00 mg of gallic acid equivalents per g of dried extract were obtained when assessing its total phenolic content by modified Folin-Ciocalteu method. The presence of polyphenols opens the possibility of further exploring the antioxidant capacity and the conditions that may enhance this characteristic. The metabolic

  14. A Multivariate Approach to Evaluate Biomass Production, Biochemical Composition and Stress Compounds of Spirulina platensis Cultivated in Wastewater.

    Science.gov (United States)

    Çelekli, Abuzer; Topyürek, Ali; Markou, Giorgos; Bozkurt, Hüseyin

    2016-10-01

    The study was performed to investigate the effects of using cow effluent for the cultivation of Spirulina platensis on its biomass production and cell physiology. S. platensis was cultivated in three different cow effluents (CE) used as cultivation medium during 15 days. CE was prepared using dry cow manures, and it was further modified with supplement of NaNO 3 (CEN) and NaNO 3  + NaCl (CENS). High nitrate value stimulated chlorophyll-a and total protein content of the cyanobacterium and also biomass production in standards medium (SM) and CEN media. Total carbohydrate content of S. platensis grown in CE media was found to be higher (p < 0.05) than that of SM. Productions of biomass and biochemical compounds by the cyanobacterium grown on the CE and SM media were evaluated by using multivariate approach. Conductivity, oxidation reduction potential (ORP), salinity, pH, and TDS played important role (p < 0.01) in the biochemical composition. As an effective explanatory factor, ORP had a significant positive correlation with H 2 O 2 , whereas negatively correlated with chlorophyll-α, biomass production, filament length, and proline. Canonical correspondence analysis proposed that biochemical compounds of S. platensis were not only affected by salinity and nutrition of media but also by pH and ORP. The present study indicated that CEN as a low cost model medium had high potential for the production of biomass by S. platensis with high protein content.

  15. Metabolomic profile and nucleoside composition of Cordyceps nidus sp. nov. (Cordycipitaceae): A new source of active compounds.

    Science.gov (United States)

    Chiriví, Juan; Danies, Giovanna; Sierra, Rocio; Schauer, Nicolas; Trenkamp, Sandra; Restrepo, Silvia; Sanjuan, Tatiana

    2017-01-01

    Cordyceps sensu lato is a genus of arthropod-pathogenic fungi, which have been used traditionally as medicinal in Asia. Within the genus, Ophiocordyceps sinensis is the most coveted and expensive species in China. Nevertheless, harvesting wild specimens has become a challenge given that natural populations of the fungus are decreasing and because large-scale culture of it has not yet been achieved. The worldwide demand for products derived from cultivable fungal species with medicinal properties has increased recently. In this study, we propose a new species, Cordyceps nidus, which parasitizes underground nests of trapdoor spiders. This species is phylogenetically related to Cordyceps militaris, Cordyceps pruinosa, and a sibling species of Cordyceps caloceroides. It is found in tropical rainforests from Bolivia, Brazil, Colombia and Ecuador. We also investigated the medicinal potential of this fungus based on its biochemical properties when grown on four different culture media. The metabolic profile particularly that of nucleosides, in polar and non-polar extracts was determined by UPLC, and then correlated to their antimicrobial activity and total phenolic content. The metabolome showed a high and significant dependency on the substrate used for fungal growth. The mass intensities of nucleosides and derivative compounds were higher in natural culture media in comparison to artificial culture media. Among these compounds, cordycepin was the predominant, showing the potential use of this species as an alternative to O. sinensis. Furthermore, methanol fractions showed antimicrobial activity against gram-positive bacteria, and less than 3.00 mg of gallic acid equivalents per g of dried extract were obtained when assessing its total phenolic content by modified Folin-Ciocalteu method. The presence of polyphenols opens the possibility of further exploring the antioxidant capacity and the conditions that may enhance this characteristic. The metabolic composition and

  16. Characterization of the organic composition of aerosols from Rondônia, Brazil, during the LBA-SMOCC 2002 experiment and its representation through model compounds

    Directory of Open Access Journals (Sweden)

    S. Decesari

    2006-01-01

    Full Text Available The chemical composition of carbonaceous aerosols collected during the LBA-SMOCC field experiment, conducted in Rondônia, Brazil, in 2002 during the transition from the dry to the wet season, was investigated by a suite of state-of-the-art analytical techniques. The period of most intense biomass burning was characterized by high concentrations of submicron particles rich in carbonaceous material and water-soluble organic compounds (WSOC. At the onset of the rainy period, submicron total carbon (TC concentrations decreased by about 20 times. In contrast, the concentration of supermicron TC was fairly constant throughout the experiment, pointing to a constant emission of coarse particles from the natural background. About 6–8% of TC (9–11% of WSOC was speciated at the molecular level by GC-MS and liquid chromatography. Polyhydroxylated compounds, aliphatic and aromatic acids were the main classes of compounds accounted for by individual compound analysis. Functional group analysis by proton NMR and chromatographic separation on ion-exchange columns allowed characterization of ca. 50–90% of WSOC into broad chemical classes (neutral species/light acids/humic-like substances. In spite of the significant change in the chemical composition of tracer compounds from the dry to the wet period, the functional groups and the general chemical classes of WSOC changed only to a small extent. Model compounds representing size-resolved WSOC chemical composition for the different periods of the campaign are then proposed in this paper, based on the chemical characterization by both individual compound analysis and functional group analysis deployed during the LBA-SMOCC experiment. Model compounds reproduce quantitatively the average chemical structure of WSOC and can be used as best-guess surrogates in microphysical models involving organic aerosol particles over tropical areas affected by biomass burning.

  17. Surface modification of nanofibrous polycaprolactone/gelatin composite scaffold by collagen type I grafting for skin tissue engineering.

    Science.gov (United States)

    Gautam, Sneh; Chou, Chia-Fu; Dinda, Amit K; Potdar, Pravin D; Mishra, Narayan C

    2014-01-01

    In the present study, a tri-polymer polycaprolactone (PCL)/gelatin/collagen type I composite nanofibrous scaffold has been fabricated by electrospinning for skin tissue engineering and wound healing applications. Firstly, PCL/gelatin nanofibrous scaffold was fabricated by electrospinning using a low cost solvent mixture [chloroform/methanol for PCL and acetic acid (80% v/v) for gelatin], and then the nanofibrous PCL/gelatin scaffold was modified by collagen type I (0.2-1.5wt.%) grafting. Morphology of the collagen type I-modified PCL/gelatin composite scaffold that was analyzed by field emission scanning electron microscopy (FE-SEM), showed that the fiber diameter was increased and pore size was decreased by increasing the concentration of collagen type I. Fourier transform infrared (FT-IR) spectroscopy and thermogravimetric (TG) analysis indicated the surface modification of PCL/gelatin scaffold by collagen type I immobilization on the surface of the scaffold. MTT assay demonstrated the viability and high proliferation rate of L929 mouse fibroblast cells on the collagen type I-modified composite scaffold. FE-SEM analysis of cell-scaffold construct illustrated the cell adhesion of L929 mouse fibroblasts on the surface of scaffold. Characteristic cell morphology of L929 was also observed on the nanofiber mesh of the collagen type I-modified scaffold. Above results suggest that the collagen type I-modified PCL/gelatin scaffold was successful in maintaining characteristic shape of fibroblasts, besides good cell proliferation. Therefore, the fibroblast seeded PCL/gelatin/collagen type I composite nanofibrous scaffold might be a potential candidate for wound healing and skin tissue engineering applications. © 2013.

  18. Optimization of Polymer-ECM Composite Scaffolds for Tissue Engineering: Effect of Cells and Culture Conditions on Polymeric Nanofiber Mats

    Directory of Open Access Journals (Sweden)

    Ritu Goyal

    2017-01-01

    Full Text Available The design of composite tissue scaffolds containing an extracellular matrix (ECM and synthetic polymer fibers is a new approach to create bioactive scaffolds that can enhance cell function. Currently, studies investigating the effects of ECM-deposition and decellularization on polymer degradation are still lacking, as are data on optimizing the stability of the ECM-containing composite scaffolds during prolonged cell culture. In this study, we develop fibrous scaffolds using three polymer compositions, representing slow (E0000, medium (E0500, and fast (E1000 degrading materials, to investigate the stability, degradation, and mechanics of the scaffolds during ECM deposition and decellularization, and during the complete cellularization-decell-recell cycle. We report data on percent molecular weight (% Mw retention of polymeric fiber mats, changes in scaffold stiffness, ECM deposition, and the presence of fibronectin after decellularization. We concluded that the fast degrading E1000 (Mw retention ≤ 50% after 28 days was not sufficiently stable to allow scaffold handling after 28 days in culture, while the slow degradation of E0000 (Mw retention ≥ 80% in 28 days did not allow deposited ECM to replace the polymer support. The scaffolds made from medium degrading E0500 (Mw retention about 60% at 28 days allowed the gradual replacement of the polymer network with cell-derived ECM while maintaining the polymer network support. Thus, polymers with an intermediate rate of degradation, maintaining good scaffold handling properties after 28 days in culture, seem best suited for creating ECM-polymer composite scaffolds.

  19. Effect of γ-irradiation on bioactivity, fatty acid compositions and volatile compounds of clary sage seed (Salvia sclarea L.).

    Science.gov (United States)

    Yalcin, Hasan; Ozturk, Ismet; Tulukcu, Eray; Sagdic, Osman

    2011-09-01

    Clary sage seeds (Salvia sclarea L.) were obtained from plants cultivated, and 2.5, 4.0, 5.5, and 7.0 kGy doses of γ-irradiation were applied to the clary sage seeds. They were then analyzed for their protein, ash, oil and dry matter contents, and fatty acid composition. Additionally, the total phenolic contents, antiradical, antioxidant activities, and volatile compounds of the clary sage seed extract were determined. There was no significant difference in protein content. However, the moisture, oil, and ash contents of the samples were affected by irradiation. While the 7 kGy dose had a positive effect on the total phenolic content and antiradical activity of the sage seed extract, all doses have negative effects on the antioxidant activity of the sage seed. The main fatty acid of the sage seed was remarkably found as α-linolenic acid. The four irradiation levels caused significant differences in fatty acid composition by affecting all fatty acids except palmitic, palmitoleic, and eicosenoic acids. The dominant volatile compounds of control sage seed were found as β-pinene (18.81%) and limonene (15.60%). Higher doses of the irradiation decreased volatile components of sage seed. Clary sage seed including high omega-3 can be irradiated with low doses (≤ 2.5 kGy) of γ-irradiation. Clary sage is one of the most popular Salvia species in Turkey and many countries. Clary sage seed has approximately 29% oil content and this oil contains >50% of α-linolenic acid. γ-Irradiation is widely applied in the preservation of spice quality. The present study shows that the antioxidant activity of the clary sage seed is decreased by γ-irradiation. Additionally, higher doses of irradiation also decreased the volatile components of sage seed. Therefore, we suggest that clary sage seed which includes high levels of omega-3 should be irradiated with low doses (≤ 2.5 kGy) of γ-irradiation. © 2011 Institute of Food Technologists®

  20. Plant nutrient deficiencies and related tissue composition of the sweet potato

    Energy Technology Data Exchange (ETDEWEB)

    Spence, J.A.; Ahmad, N.

    The visual symptoms which appear in sweet potato, Ipomoea batatas, under conditions of deficiency of nitrogen, sulfur, phosphorus, magnesium, potassium, calcium and iron are described. These symptoms were produced by growth of two node cuttings in sand culture. Results of tissue analysis for three harvests during the growth period are also presented. 7 references, 3 figures, 1 table.

  1. Self-assembled composite matrix in a hierarchical 3D scaffold for bone tissue engineering

    DEFF Research Database (Denmark)

    Chen, M; Le, D Q S; Baatrup, Anette

    2011-01-01

    It is of high clinical relevance in bone tissue engineering that scaffolds promote a high seeding efficiency of cells capable of osteogenic differentiation, such as human bone marrow-derived mesenchymal stem cells (hMSC). We evaluated the effects of a novel polycaprolactone (PCL) scaffold on h...

  2. Laser-assisted cold-sprayed hydroxyapatite/titanium composites: evaluation for tissues engineering applications

    CSIR Research Space (South Africa)

    Tlotleng, Monnamme

    2013-08-01

    Full Text Available This research work seeks to establish titanium alloys (Ti-6Al-4V), in the field of tissue engineering, as material of interest for bone replacement with a particular focus on hip implants replacement. The aim of this study was to produce a surface...

  3. Photoactivated Composite Biomaterial for Soft Tissue Restoration in Rodents and in Humans

    Science.gov (United States)

    Nahas, Zayna; Reid, Branden; Coburn, Jeannine M.; Axelman, Joyce; Chae, Jemin J.; Guo, Qiongyu; Trow, Robert; Thomas, Andrew; Hou, Zhipeng; Lichtsteiner, Serge; Sutton, Damon; Matheson, Christine; Walker, Patricia; David, Nathaniel; Mori, Susumu; Taube, Janis M.; Elisseeff, Jennifer H.

    2015-01-01

    Soft tissue reconstruction often requires multiple surgical procedures that can result in scars and disfiguration. Facial soft tissue reconstruction represents a clinical challenge because even subtle deformities can severely affect an individual’s social and psychological function. We therefore developed a biosynthetic soft tissue replacement composed of poly(ethylene glycol) (PEG) and hyaluronic acid (HA) that can be injected and photocrosslinked in situ with transdermal light exposure. Modulating the ratio of synthetic to biological polymer allowed us to tune implant elasticity and volume persistence. In a small-animal model, implanted photocrosslinked PEG-HA showed a dose-dependent relationship between increasing PEG concentration and enhanced implant volume persistence. In direct comparison with commercial HA injections, the PEG-HA implants maintained significantly greater average volumes and heights. Reversibility of the implant volume was achieved with hyaluronidase injection. Pilot clinical testing in human patients confirmed the feasibility of the transdermal photocrosslinking approach for implantation in abdomen soft tissue, although an inflammatory response was observed surrounding some of the materials. PMID:21795587

  4. The effect of PEGT/PBT scaffold architecture on the composition of tissue engineered cartilage

    NARCIS (Netherlands)

    Malda, J.; Woodfield, T.B.F.; van der Vloodt, F.; Wilson, C.; Wilson, C.E.; Martens, D.E.; Tramper, J.; van Blitterswijk, Clemens; Riesle, J.U.

    2005-01-01

    A highly interconnecting and accessible pore network has been suggested as one of a number of prerequisites in the design of scaffolds for tissue engineering. In the present study, two processing techniques, compression-molding/particulate-leaching (CM), and 3D fiber deposition (3DF), were used to

  5. Multi-tissue omics analyses reveal molecular regulatory networks for puberty in composite beef cattle.

    Directory of Open Access Journals (Sweden)

    Angela Cánovas

    Full Text Available Puberty is a complex physiological event by which animals mature into an adult capable of sexual reproduction. In order to enhance our understanding of the genes and regulatory pathways and networks involved in puberty, we characterized the transcriptome of five reproductive tissues (i.e. hypothalamus, pituitary gland, ovary, uterus, and endometrium as well as tissues known to be relevant to growth and metabolism needed to achieve puberty (i.e., longissimus dorsi muscle, adipose, and liver. These tissues were collected from pre- and post-pubertal Brangus heifers (3/8 Brahman; Bos indicus x 5/8 Angus; Bos taurus derived from a population of cattle used to identify quantitative trait loci associated with fertility traits (i.e., age of first observed corpus luteum (ACL, first service conception (FSC, and heifer pregnancy (HPG. In order to exploit the power of complementary omics analyses, pre- and post-puberty co-expression gene networks were constructed by combining the results from genome-wide association studies (GWAS, RNA-Seq, and bovine transcription factors. Eight tissues among pre-pubertal and post-pubertal Brangus heifers revealed 1,515 differentially expressed and 943 tissue-specific genes within the 17,832 genes confirmed by RNA-Seq analysis. The hypothalamus experienced the most notable up-regulation of genes via puberty (i.e., 204 out of 275 genes. Combining the results of GWAS and RNA-Seq, we identified 25 loci containing a single nucleotide polymorphism (SNP associated with ACL, FSC, and (or HPG. Seventeen of these SNP were within a gene and 13 of the genes were expressed in uterus or endometrium. Multi-tissue omics analyses revealed 2,450 co-expressed genes relative to puberty. The pre-pubertal network had 372,861 connections whereas the post-pubertal network had 328,357 connections. A sub-network from this process revealed key transcriptional regulators (i.e., PITX2, FOXA1, DACH2, PROP1, SIX6, etc.. Results from these multi-tissue

  6. Influence of the chemical composition of human tissues on dose distributions in hadron-therapy

    International Nuclear Information System (INIS)

    Batin, E.

    2008-06-01

    To compute the dose distribution, treatment planning systems require the exact anatomical location of tissues provided by computed tomography (CT) and the exact range of hadron beams in tissues based on the water equivalent ratio (WER). Since CT numbers are determined with x-rays and with an energy different from that used in hadron-therapy, a relation between CT numbers and the WER must to be established. We propose a determination of the WER with a Monte-Carlo simulation (GEANT4). We have determined the WER for 76 human tissues for a 135 MeV proton beam and for a 290 MeV/A carbon beam. The difference between the stoichiometric calibration and the simulated WER is lower than 1%. An additional 2% uncertainty that arises from the uncertainty in the CT numbers measurement should also be considered. The calculated WER were used to convert the deposited energy curve into the human tissue deposited energy curve for a 135 MeV proton beam and for a 290 MeV/A carbon beam. For both beams, the difference between the rescaled Bragg peak location and the one from the simulated curve is lower than 0.5 mm over the whole range of CT numbers. The differences between the maximum deposited energy can reach 3% for the proton beam in bones and vary between 1.5% and 3.5% for all tissues for the carbon beam. The scaling in two dimensions can be improved by using an additional factor that takes the scattering into account. (author)

  7. Alterations in the Immune Cell Composition in Premalignant Breast Tissue that Precede Breast Cancer Development.

    Science.gov (United States)

    Degnim, Amy C; Hoskin, Tanya L; Arshad, Muhammad; Frost, Marlene H; Winham, Stacey J; Brahmbhatt, Rushin A; Pena, Alvaro; Carter, Jodi M; Stallings-Mann, Melody L; Murphy, Linda M; Miller, Erin E; Denison, Lori A; Vachon, Celine M; Knutson, Keith L; Radisky, Derek C; Visscher, Daniel W

    2017-07-15

    Purpose: Little is known about the role of the immune system in the earliest stages of breast carcinogenesis. We studied quantitative differences in immune cell types between breast tissues from normal donors and those from women with benign breast disease (BBD). Experimental Design: A breast tissue matched case-control study was created from donors to the Susan G. Komen for the Cure Tissue Bank (KTB) and from women diagnosed with BBD at Mayo Clinic (Rochester, MN) who either subsequently developed cancer (BBD cases) or remained cancer-free (BBD controls). Serial tissue sections underwent immunostaining and digital quantification of cell number per mm 2 for CD4 + T cells, CD8 + T cells, CD20 + B cells, and CD68 + macrophages and quantification of positive pixel measure for CD11c (dendritic cells). Results: In 94 age-matched triplets, BBD lobules showed greater densities of CD8 + T cells, CD11c + dendritic cells, CD20 + B cells, and CD68 + macrophages compared with KTB normals. Relative to BBD controls, BBD cases had lower CD20 + cell density ( P = 0.04). Nearly 42% of BBD cases had no CD20 + B cells in evaluated lobules compared with 28% of BBD controls ( P = 0.02). The absence of CD20 + cells versus the presence in all lobules showed an adjusted OR of 5.7 (95% confidence interval, 1.4-23.1) for subsequent breast cancer risk. Conclusions: Elevated infiltration of both innate and adaptive immune effectors in BBD tissues suggests an immunogenic microenvironment. The reduced B-cell infiltration in women with later breast cancer suggests a role for B cells in preventing disease progression and as a possible biomarker for breast cancer risk. Clin Cancer Res; 23(14); 3945-52. ©2017 AACR . ©2017 American Association for Cancer Research.

  8. Effects of homocysteine and its related compounds on oxygen consumption of the rat heart tissue homogenate: the role of different gasotransmitters.

    Science.gov (United States)

    Uzelac, Jovana Jakovljević; Stanić, Marina; Krstić, Danijela; Čolović, Mirjana; Djurić, Dragan

    2017-11-29

    The objective of this study was to investigate in vitro effects of 10 µM DL-homocysteine (DL-Hcy), DL-homocysteine thiolactone-hydrochloride (DL-Hcy TLHC), and L-homocysteine thiolactone-hydrochloride (L-Hcy TLHC) on the oxygen consumption of rat heart tissue homogenate, as well as the involvement of the gasotransmitters NO, H 2 S and CO in the effects of the most toxic homocysteine compound, DL-Hcy TLHC. The possible contribution of the gasotransmitters in these effects was estimated by using the appropriate inhibitors of their synthesis (N ω -nitro-L-arginine methyl ester (L-NAME), DL-propargylglycine (DL-PAG), and zinc protoporphyrin IX (ZnPPR IX), respectively). The oxygen consumption of rat heart tissue homogenate was measured by Clark/type oxygen electrode in the absence and presence of the investigated compounds. All three homocysteine-based compounds caused a similar decrease in the oxygen consumption rate compared to control: 15.19 ± 4.01%, 12.42 ± 1.01%, and 16.43 ± 4.52% for DL-Hcy, DL-Hcy TLHC, or L-Hcy TLHC, respectively. All applied inhibitors of gasotransmitter synthesis also decreased the oxygen consumption rate of tissue homogenate related to control: 13.53 ± 1.35% for L-NAME (30 µM), 5.32 ± 1.23% for DL-PAG (10 µM), and 5.56 ± 1.39% for ZnPPR IX (10 µM). Simultaneous effect of L-NAME (30 µM) or ZnPPR IX (10 µM) with DL-Hcy TLHC (10 µM) caused a larger decrease of oxygen consumption compared to each of the substances individually. However, when DL-PAG (10 µM) was applied together with DL-Hcy TLHC (10 µM), it attenuated the effect of DL-Hcy TLHC from 12.42 ± 1.01 to 9.22 ± 1.58%. In conclusion, cardiotoxicity induced by Hcy-related compounds, which was shown in our previous research, could result from the inhibition of the oxygen consumption, and might be mediated by the certain gasotransmitters.

  9. Fabrication of Nanohydroxyapatite/Poly(caprolactone Composite Microfibers Using Electrospinning Technique for Tissue Engineering Applications

    Directory of Open Access Journals (Sweden)

    Mohd Izzat Hassan

    2014-01-01

    Full Text Available Tissue engineering fibrous scaffolds serve as three-dimensional (3D environmental framework by mimicking the extracellular matrix (ECM for cells to grow. Biodegradable polycaprolactone (PCL microfibers were fabricated to mimic the ECM as a scaffold with 7.5% (w/v and 12.5% (w/v concentrations. Lower PCL concentration of 7.5% (w/v resulted in microfibers with bead defects. The average diameter of fibers increased at higher voltage and the distance of tip to collector. Further investigation was performed by the incorporation of nanosized hydroxyapatite (nHA into microfibers. The incorporation of 10% (w/w nHA with 7.5% (w/v PCL solution produced submicron sized beadless fibers. The microfibrous scaffolds were evaluated using various techniques. Biodegradable PCL and nHA/PCL could be promising for tissue engineering scaffold application.

  10. The Study on Biocompatibility of Porous nHA/PLGA Composite Scaffolds for Tissue Engineering with Rabbit Chondrocytes In Vitro

    Directory of Open Access Journals (Sweden)

    Lei Chen

    2013-01-01

    Full Text Available Objective. To examine the biocompatibility of a novel nanohydroxyapatite/poly[lactic-co-glycolic acid] (nHA/PLGA composite and evaluate its feasibility as a scaffold for cartilage tissue engineering. Methods. Chondrocytes of fetal rabbit were cultured with nHA/PLGA scaffold in vitro and the cell viability was assessed by MTT assay first. Cells adhering to nHA/PLGA scaffold were then observed by inverted microscope and scanning electron microscope (SEM. The cell cycle profile was analyzed by flow cytometry. Results. The viability of the chondrocytes on the scaffold was not affected by nHA/PLGA comparing with the control group as it was shown by MTT assay. Cells on the surface and in the pores of the scaffold increased in a time-dependent manner. Results obtained from flow cytometry showed that there was no significant difference in cell cycle profiles between the coculture group and control (P>0.05. Conclusion. The porous nHA/PLGA composite scaffold is a biocompatible and good kind of scaffold for cartilage tissue engineering.

  11. Chitosan-amylopectin/hydroxyapatite and chitosan-chondroitin sulphate/hydroxyapatite composite scaffolds for bone tissue engineering.

    Science.gov (United States)

    Venkatesan, Jayachandran; Pallela, Ramjee; Bhatnagar, Ira; Kim, Se-Kwon

    2012-12-01

    Over the past few decades, artificial graft materials for bone tissue engineering are gaining much importance. In this study, tri-component scaffolds of chitosan/natural hydroxyapatite with chondroitin sulfate (chitosan-CS/HAp) and amylopectin (chitosan-AP/HAp) have been developed for the first time via freeze-drying method and were characterized physicochemically for bone grafting substitutes. Chemical interactions and dispersion of HAp, CS and AP in the chitosan matrix have been evaluated by various analytical techniques. The porosity and water uptake/retention ability of these composite scaffolds decreased whereas thermal stability increased when compared to the chitosan scaffold. The pore size of the chitosan/HAp, chitosan-CS/HAp and chitosan-AP/HAp scaffolds varied from 60 to 180 μm, 60 to 400 μm and 80 to 500 μm, respectively. Cell proliferation, alkaline phosphatase activity and type-1 collagen production was evaluated in vitro using MG-63 cell line, which was observed to be higher in the composite scaffolds. Excellent interconnected porosity, controlled biodegradation and enhanced cell proliferation of the novel chitosan-CS/HAp and chitosan-AP/HAp scaffolds suggests that these scaffolds are promising biomaterials for bone tissue engineering. Copyright © 2012 Elsevier B.V. All rights reserved.

  12. Comparative study of cellular and extracellular matrix composition of native and tissue engineered heart valves.

    Science.gov (United States)

    Schenke-Layland, K; Riemann, I; Opitz, F; König, K; Halbhuber, K J; Stock, U A

    2004-05-01

    Tissue engineering of heart valves utilizes biodegradable or metabolizable scaffolds for remodeling by seeded autologous cells. The aim of this study was to determine and compare extracellular matrix (ECM) formations, cellular phenotypes and cell location of native and tissue engineered (TE) valve leaflets. Ovine carotid arteries, ovine and porcine hearts were obtained from slaughterhouses. Cells were isolated from carotid arteries and dissected ovine, porcine and TE leaflets. TE constructs were fabricated from decellularized porcine pulmonary valves, seeded ovine arterial cells and subsequent 16 days dynamic in vitro culture using a pulsatile bioreactor. Native and TE valves were studied by histology (hematoxylin-eosin, resorcin-fuchsin, Movat pentachrome), NIR femtosecond multiphoton laser scanning microscopy and scanning electron microscopy (SEM). Cells of native and TE tissues were identified and localized by immunohistochemistry. Arterial, valvular and re-isolated TE-construct cells were processed for immunocytochemistry and Western blotting. ECM analysis and SEM revealed characteristical and comparable structures in native and TE leaflets. Most cells in native leaflets stained strongly positive for vimentin. Cells positive to alpha-smooth muscle actin (alpha-SMA), myosin and calponin were only found at the ventricular (inflow) side of ovine aortic and porcine pulmonary valve leaflets. Cells from TE constructs had a strong expression of vimentin, alpha-SMA, myosin, calponin and h-caldesmon throughout the entire leaflet. Comparable ECM formation and endothelial cell lining of native and TE leaflets could be demonstrated. However, immunostaining revealed significant differences between valvular cell phenotypes of native and TE leaflets. These results may be essential for further cardiovascular tissue engineering efforts.

  13. Prediction of Local Ultimate Strain and Toughness of Trabecular Bone Tissue by Raman Material Composition Analysis

    OpenAIRE

    Carretta, Roberto; Stüssi, Edgar; Müller, Ralph; Lorenzetti, Silvio

    2015-01-01

    Clinical studies indicate that bone mineral density correlates with fracture risk at the population level but does not correlate with individual fracture risk well. Current research aims to better understand the failure mechanism of bone and to identify key determinants of bone quality, thus improving fracture risk prediction. To get a better understanding of bone strength, it is important to analyze tissue-level properties not influenced by macro- or microarchitectural factors. The aim of th...

  14. A composite hydrogel platform for the dissection of tumor cell migration at tissue interfaces

    Science.gov (United States)

    Rape, Andrew; Kumar, Sanjay

    2014-01-01

    Glioblastoma multiforme (GBM), the most prevalent primary brain cancer, is characterized by diffuse infiltration of tumor cells into brain tissue, which severely complicates surgical resection and contributes to tumor recurrence. The most rapid mode of tissue infiltration occurs along blood vessels or white matter tracts, which represent topological interfaces thought to serve as “tracks” that speed cell migration. Despite this observation, the field lacks experimental paradigms that capture key features of these tissue interfaces and allow reductionist dissection of mechanisms of this interfacial motility. To address this need, we developed a culture system in which tumor cells are sandwiched between a ventral fibronectin-coated dorsal surface representing vascular basement membrane and a dorsal hyaluronic acid (HA) surface representing brain parenchyma. We find that inclusion of the dorsal HA surface induces formation of adhesive complexes and significantly slows cell migration relative to a free fibronectin-coated surface. This retardation is amplified by inclusion of integrin binding peptides in the dorsal layer and expression of CD44, suggesting that the dorsal surface slows migration through biochemically specific mechanisms rather than simple steric hindrance. Moreover, both the reduction in migration speed and assembly of dorsal adhesions depend on myosin activation and the stiffness of the ventral layer, implying that mechanochemical feedback directed by the ventral layer can influence adhesive signaling at the dorsal surface. PMID:25047626

  15. Bioactive Glasses: From Parent 45S5 Composition to Scaffold-Assisted Tissue-Healing Therapies

    Science.gov (United States)

    Fiume, Elisa; Barberi, Jacopo; Verné, Enrica

    2018-01-01

    Nowadays, bioactive glasses (BGs) are mainly used to improve and support the healing process of osseous defects deriving from traumatic events, tumor removal, congenital pathologies, implant revisions, or infections. In the past, several approaches have been proposed in the replacement of extensive bone defects, each one with its own advantages and drawbacks. As a result, the need for synthetic bone grafts is still a remarkable clinical challenge since more than 1 million bone-graft surgical operations are annually performed worldwide. Moreover, recent studies show the effectiveness of BGs in the regeneration of soft tissues, too. Often, surgical criteria do not match the engineering ones and, thus, a compromise is required for getting closer to an ideal outcome in terms of good regeneration, mechanical support, and biocompatibility in contact with living tissues. The aim of the present review is providing a general overview of BGs, with particular reference to their use in clinics over the last decades and the latest synthesis/processing methods. Recent advances in the use of BGs in tissue engineering are outlined, where the use of porous scaffolds is gaining growing importance thanks to the new possibilities given by technological progress extended to both manufacturing processes and functionalization techniques. PMID:29547544

  16. Bioactive Glasses: From Parent 45S5 Composition to Scaffold-Assisted Tissue-Healing Therapies

    Directory of Open Access Journals (Sweden)

    Elisa Fiume

    2018-03-01

    Full Text Available Nowadays, bioactive glasses (BGs are mainly used to improve and support the healing process of osseous defects deriving from traumatic events, tumor removal, congenital pathologies, implant revisions, or infections. In the past, several approaches have been proposed in the replacement of extensive bone defects, each one with its own advantages and drawbacks. As a result, the need for synthetic bone grafts is still a remarkable clinical challenge since more than 1 million bone-graft surgical operations are annually performed worldwide. Moreover, recent studies show the effectiveness of BGs in the regeneration of soft tissues, too. Often, surgical criteria do not match the engineering ones and, thus, a compromise is required for getting closer to an ideal outcome in terms of good regeneration, mechanical support, and biocompatibility in contact with living tissues. The aim of the present review is providing a general overview of BGs, with particular reference to their use in clinics over the last decades and the latest synthesis/processing methods. Recent advances in the use of BGs in tissue engineering are outlined, where the use of porous scaffolds is gaining growing importance thanks to the new possibilities given by technological progress extended to both manufacturing processes and functionalization techniques.

  17. Changes in tissue composition of the vaginal wall of premenopausal women with prolapse.

    Science.gov (United States)

    Kerkhof, Manon H; Ruiz-Zapata, Alejandra M; Bril, Herman; Bleeker, Maaike C G; Belien, Jeroen A M; Stoop, Reinout; Helder, Marco N

    2014-02-01

    The objective of this study was to compare histological and biochemical features of the (normal) precervical anterior vaginal wall and the prolapsed anterior vaginal wall of women with pelvic organ prolapse (POP). These data were compared to tissue of the precervical anterior vaginal wall of age-matched controls without POP to identify possible intrinsic and acquired effects. Biopsies were collected from the apex of the anterior vaginal cuff after hysterectomy from a control group of 13 premenopausal women undergoing hysterectomy for benign gynecological diseases, and a case group of 13 premenopausal women undergoing prolapse surgery (cystocele POP-Quantification stage ≥2). In women with POP an additional full-thickness vaginal wall sample was taken from the POP site during anterior colporrhaphy. Histomorphometric and biochemical analysis were performed for different components of the extracellular matrix. There were no differences between case and control group in the precervical vaginal wall tissue with respect to the different components of the extracellular matrix and the biochemical parameters. However, there was a tendency toward a higher amount of collagen III and elastin, and a significant increase of smooth muscle cells and pyridinoline collagen cross-links in the POP site compared to the non-POP site of the same POP patient. Our findings suggest that the changes seen in connective tissue in the anterior vaginal wall of women with POP are the effect, rather than the cause, of POP. Copyright © 2014 Mosby, Inc. All rights reserved.

  18. Novel feed including bioactive compounds from winery wastes improved broilers' redox status in blood and tissues of vital organs.

    Science.gov (United States)

    Makri, Sotiria; Kafantaris, Ioannis; Stagos, Dimitrios; Chamokeridou, Theodora; Petrotos, Konstantinos; Gerasopoulos, Konstantinos; Mpesios, Anastasios; Goutzourelas, Nikolaos; Kokkas, Stylianos; Goulas, Panagiotis; Komiotis, Dimitrios; Kouretas, Dimitrios

    2017-04-01

    Currently, there is a great interest in the production of animal feed with antioxidant activity. The aim of this study was to examine the potential antioxidant effects of a feed supplemented with grape pomace (GP), a winery by-product with high environmental load, in chickens. Broilers of 15 days post birth were separated into two groups fed either with standard diet or with diet supplemented with GP for 35 days. Blood and tissues collections were performed after feeding for 15 and 35 days with the experimental diet (i.e. at 30 and 50 days post birth). Free radical toxicity markers, namely thiobarbituric acid reactive substances, protein carbonyls, total antioxidant capacity, reduced glutathione, catalase activity and rate of H 2 O 2 decomposition were determined in blood and tissues of vital organs. The results indicated that feed supplemented with GP decreased oxidative stress-induced toxic effects and improved chickens' redox status, and so it may also improve their wellness and productivity. On the other hand, this exploitation of GP may solve problems of environmental pollution in areas with wineries. Copyright © 2017. Published by Elsevier Ltd.

  19. Protective effects of resin sealant and flowable composite coatings against erosive and abrasive wear of dental hard tissues.

    Science.gov (United States)

    Zhao, Xiaoyi; Pan, Jie; Malmstrom, Hans S; Ren, Yan-Fang

    2016-06-01

    To test the effectiveness of sealant and flowable composite coating on eroded enamel, dentin and cementum under erosive/abrasive challenges in vitro. A total of 108 tissue sections (36 each for enamel, dentin and cementum) from third molars were assigned to three groups: Seal & Protect sealant (S&P), Tetric EvoFlow composite (TEF) and control. Erosive/abrasive lesions were created on each specimen by citric acid and brushing with toothpaste. S&P and TEF were applied to the lesions and subjected to erosive/abrasive cycling included 24 cycles of immersion in citric acid (pH 3.6) for 60min, followed by remineralization for 120min and brushing with toothpastes for 600 strokes at 150g. Erosive wear of materials or dental tissues were measured with 3D scanning microscopy and data were analyzed using ANOVA. Treatments with S&P and TEF created a protective material coating of 42.7±17.8μm and 150.8±9.9μm in thickness, respectively. After 24 cycles of erosive/abrasive challenges, tissue losses were -346.9±37.3μm for enamel, -166.5±26.3μm for dentin and -164.7±18.2μm for cementum in untreated controls, as compared to material losses of -24.4±3.3μm for S&P, and -10.8±4.4μm for TEF, respectively. Both S&P and TEF were effective in protecting enamel, dentin and cementum against erosive tooth wear (pwear than TEF (pabrasive challenges. A thin coating of flowable composite resin 150μm in thickness may provide long-term protection against erosive/abrasive tooth wear. Resin sealant may provide adequate protection for dental hard tissues in short-term and may require repeated applications if long-term protection is desired. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. Determination of the bioactive compounds, antioxidant activity and chemical composition of Brazilian blackberry, red raspberry, strawberry, blueberry and sweet cherry fruits.

    Science.gov (United States)

    de Souza, Vanessa Rios; Pereira, Patrícia Aparecida Pimenta; da Silva, Thais Lomônaco Teodoro; de Oliveira Lima, Luiz Carlos; Pio, Rafael; Queiroz, Fabiana

    2014-08-01

    This study aimed to evaluate the chemical composition, identify the bioactive compounds and measure the antioxidant activity present in blackberry, red raspberry, strawberry, sweet cherry and blueberry fruits produced in the subtropical areas of Brazil and to verify that the chemical properties of these fruit are similar when compared to the temperate production zones. Compared with berries and cherries grown in temperate climates, the centesimal composition and physical chemical characteristics found in the Brazilian berries and cherries are in agreement with data from the literature. For the mineral composition, the analyzed fruits presented lower concentrations of P, K, Ca, Mg and Zn and higher levels of Fe. The values found for the bioactive compounds generally fit the ranges reported in the literature with minor differences. The greatest difference was found in relation to ascorbic acid, as all fruits analyzed showed levels well above those found in the literature. Copyright © 2014 Elsevier Ltd. All rights reserved.

  1. Outcomes after free tissue transfer for composite oral cavity resections involving skin.

    Science.gov (United States)

    Alvi, Sameer A; Hamill, Chelsea S; Lepse, Jason P; Ayala, Marco; Girod, Douglas A; Tsue, Terance T; Shnayder, Yelizaveta; Kakarala, Kiran

    2018-01-23

    Resections involving oral cavity mucosa, bone, and skin present a unique challenge. Optimizing outcomes often requires technically demanding reconstruction. The purpose of this study is to evaluate outcomes of several reconstructive approaches for patients with composite through-and-through defects, with a focus on the osteocutaneous radial forearm free flap (RFFF). We conducted a retrospective evaluation of the cohort of patients treated for composite through-and-through defects with cutaneous involvement who underwent free flap reconstruction from August 2012 through October 2015. Seventeen patients received a single flap (12 cases of osteocutaneous RFFF), whereas 10 patients underwent a combination of flaps. Complication rates and functional outcomes were favorable in patients who underwent osteocutaneous RFFFs. The supraclavicular artery island flap (SCAIF) was used as a second flap in 3 cases. The osteocutaneous RFFF provides a valuable reconstructive option for complex composite resection defects involving skin. When 2 flaps are required, the SCAIF is a viable alternative to a second free flap or pectoralis flap. © 2018 Wiley Periodicals, Inc.

  2. Aligned porous barium titanate/hydroxyapatite composites with high piezoelectric coefficients for bone tissue engineering.

    Science.gov (United States)

    Zhang, Yan; Chen, Liangjian; Zeng, Jing; Zhou, Kechao; Zhang, Dou

    2014-06-01

    It was proposed that the piezoelectric effect played an important physiological role in bone growth, remodelling and fracture healing. An aligned porous piezoelectric composite scaffold was fabricated by freeze casting hydroxyapatite/barium titanate (HA/BT) suspensions. The highest compressive strength and lowest porosity of 14.5MPa and 57.4% with the best parallelism of the pore channels were achieved in the HA10/BT90 composite. HA30/BT70 and HA10/BT90 composites exhibited piezoelectric coefficient d33 of 1.2 and 2.8pC/N, respectively, both of which were higher than the piezoelectric coefficient of natural bone. Increase of the solid loading of the suspension and solidification velocity led to the improvement of piezoelectric coefficient d33. Meanwhile, double-templates resulted in the coexistence of lamellar pores and aligned macro-pores, exhibiting the ability to produce an oriented long-range ordered architecture. The manipulation flexibility of this method indicated the potential for customized needs in the application of bone substitute. An MTT assay indicated that the obtained scaffolds had no cytotoxic effects on L929 cells. Copyright © 2014 Elsevier B.V. All rights reserved.

  3. Dietary fatty acid composition influences tissue lipid profiles and regulation of body temperature in Japanese quail.

    Science.gov (United States)

    Ben-Hamo, Miriam; McCue, Marshall D; McWilliams, Scott R; Pinshow, Berry

    2011-08-01

    Many avian species reduce their body temperature (T(b)) to conserve energy during periods of inactivity, and we recently characterized how ambient temperature (T(a)) and nutritional stress interact with one another to influence physiologically controlled hypothermic responses in Japanese quail (Coturnix japonica). In the present study, we examined how the fatty acid (FA) composition of the diet influences the FA composition of phospholipids in major organs and how these affect controlled hypothermic responses and metabolic rates in fasted birds. For 5 weeks prior to fasting, quail were fed a standard diet and gavaged each morning with 0.7 ml of water (control), or a vegetable oil comprising saturated fatty acids (SFA; coconut oil), or unsaturated fatty acids (UFA; canola oil). Birds were then fasted for 4 days at a T(a) of 15°C. We found that, while fasting, both photophase and scotophase T(b) decreased significantly more in the SFA treatment group than in the control group; apparently the former down-regulated their T(b) set point. This deeper hypothermic response was correlated with changes in the phospholipid composition of the skeletal muscle and liver, which contained significantly more oleic acid (18:1) and less arachidonic acid (20:4), respectively. Our data imply that these two FAs may be associated with thermoregulation.

  4. Fabrication and characterization of PCL/gelatin composite nanofibrous scaffold for tissue engineering applications by electrospinning method

    International Nuclear Information System (INIS)

    Gautam, Sneh; Dinda, Amit Kumar; Mishra, Narayan Chandra

    2013-01-01

    In the present study, composite nanofibrous tissue engineering-scaffold consisting of polycaprolactone and gelatin, was fabricated by electrospinning method, using a new cost-effective solvent mixture: chloroform/methanol for polycaprolactone (PCL) and acetic acid for gelatin. The morphology of the nanofibrous scaffold was investigated by using field emission scanning electron microscopy (FE-SEM) which clearly indicates that the morphology of nanofibers was influenced by the weight ratio of PCL to gelatin in the solution. Uniform fibers were produced only when the weight ratio of PCL/gelatin is sufficiently high (10:1). The scaffold was further characterized by Fourier transform infrared (FT-IR) spectroscopy, thermogravimetric (TG) analysis, and X-ray diffraction (XRD). FT-IR and TG analysis indicated some interactions between PCL and gelatin molecules within the scaffold, while XRD results demonstrated crystalline nature of PCL/gelatin composite scaffold. Cytotoxicity effect of scaffold on L929 mouse fibroblast cells was evaluated by MTT assay and cell proliferation on the scaffold was confirmed by DNA quantification. Positive results of MTT assay and DNA quantification L929 mouse fibroblast cells indicated that the scaffold made from the combination of natural polymer (gelatin) and synthetic polymer (PCL) may serve as a good candidate for tissue engineering applications. - Highlights: ► PCL/Gelatin scaffold was successfully fabricated by electrospinning method. ► PCL in CHCl 3 /CH 3 OH and gelatin in acetic acid: a novel polymer-solvent system. ► The morphology of nanofibers was influenced by the weight ratio of PCL/gelatin. ► Chemical interactions between PCL and gelatin molecules enhanced cell growth. ► Cell culture studies indicate the suitability of scaffold for tissue regeneration

  5. Fatty acid composition of total lipids and phospholipids of muscular tissue and brain of rats under the impact of vibration

    Directory of Open Access Journals (Sweden)

    N. M. Kostyshyn

    2016-06-01

    Full Text Available Fatty acids are important structural components of biological membranes, energy substrate of cells involved in fixing phospholipid bilayer proteins, and acting as regulators and modulators of enzymatic activity. Under the impact of vibration oscillations there can occur shifts in the ratio of different groups of fatty acids, and degrees of their saturation may change. The imbalance between saturated, monounsaturated and polyunsaturated fatty acids, which occurs later in the cell wall, disrupts fluidity and viscosity of lipid phase and causes abnormal cellular metabolism. Aim. In order to study the impact of vibration on the level of fatty acids of total lipids in muscular tissue and fatty acid composition of phospholipids in muscles and brain, experimental animals have been exposed to vertical vibration oscillations with different frequency for 28 days. Methods and results. Tissues fragments of hip quadriceps and brain of rats were used for obtaining methyl esters of fatty acids studied by the method of gas-liquid chromatography. It was found that the lipid content, ratio of its separate factions and fatty acid composition in muscular tissue and brain of animals with the action of vibration considerably varies. With the increase of vibration acceleration tendency to increase in absolute quantity of total lipids fatty acids can be observed at the account of increased level of saturated and monounsaturated ones. These processes are caused by activation of self-defense mechanisms of the body under the conditions of deviations from stabilized physiological norm, since adaptation requires certain structural and energy costs. Increase in the relative quantity of saturated and monounsaturated fatty acids in phospholipids of muscles and brain and simultaneous reduction in concentration of polyunsaturated fatty acids are observed. Conclusion. These changes indicate worsening of structural and functional organization of muscles and brain cell membranes of

  6. Age-Dependent Changes in Geometry, Tissue Composition and Mechanical Properties of Fetal to Adult Cryopreserved Human Heart Valves.

    Science.gov (United States)

    van Geemen, Daphne; Soares, Ana L F; Oomen, Pim J A; Driessen-Mol, Anita; Janssen-van den Broek, Marloes W J T; van den Bogaerdt, Antoon J; Bogers, Ad J J C; Goumans, Marie-José T H; Baaijens, Frank P T; Bouten, Carlijn V C

    2016-01-01

    There is limited information about age-specific structural and functional properties of human heart valves, while this information is key to the development and evaluation of living valve replacements for pediatric and adolescent patients. Here, we present an extended data set of structure-function properties of cryopreserved human pulmonary and aortic heart valves, providing age-specific information for living valve replacements. Tissue composition, morphology, mechanical properties, and maturation of leaflets from 16 pairs of structurally unaffected aortic and pulmonary valves of human donors (fetal-53 years) were analyzed. Interestingly, no major differences were observed between the aortic and pulmonary valves. Valve annulus and leaflet dimensions increase throughout life. The typical three-layered leaflet structure is present before birth, but becomes more distinct with age. After birth, cell numbers decrease rapidly, while remaining cells obtain a quiescent phenotype and reside in the ventricularis and spongiosa. With age and maturation-but more pronounced in aortic valves-the matrix shows an increasing amount of collagen and collagen cross-links and a reduction in glycosaminoglycans. These matrix changes correlate with increasing leaflet stiffness with age. Our data provide a new and comprehensive overview of the changes of structure-function properties of fetal to adult human semilunar heart valves that can be used to evaluate and optimize future therapies, such as tissue engineering of heart valves. Changing hemodynamic conditions with age can explain initial changes in matrix composition and consequent mechanical properties, but cannot explain the ongoing changes in valve dimensions and matrix composition at older age.

  7. Age-Dependent Changes in Geometry, Tissue Composition and Mechanical Properties of Fetal to Adult Cryopreserved Human Heart Valves.

    Directory of Open Access Journals (Sweden)

    Daphne van Geemen

    Full Text Available There is limited information about age-specific structural and functional properties of human heart valves, while this information is key to the development and evaluation of living valve replacements for pediatric and adolescent patients. Here, we present an extended data set of structure-function properties of cryopreserved human pulmonary and aortic heart valves, providing age-specific information for living valve replacements. Tissue composition, morphology, mechanical properties, and maturation of leaflets from 16 pairs of structurally unaffected aortic and pulmonary valves of human donors (fetal-53 years were analyzed. Interestingly, no major differences were observed between the aortic and pulmonary valves. Valve annulus and leaflet dimensions increase throughout life. The typical three-layered leaflet structure is present before birth, but becomes more distinct with age. After birth, cell numbers decrease rapidly, while remaining cells obtain a quiescent phenotype and reside in the ventricularis and spongiosa. With age and maturation-but more pronounced in aortic valves-the matrix shows an increasing amount of collagen and collagen cross-links and a reduction in glycosaminoglycans. These matrix changes correlate with increasing leaflet stiffness with age. Our data provide a new and comprehensive overview of the changes of structure-function properties of fetal to adult human semilunar heart valves that can be used to evaluate and optimize future therapies, such as tissue engineering of heart valves. Changing hemodynamic conditions with age can explain initial changes in matrix composition and consequent mechanical properties, but cannot explain the ongoing changes in valve dimensions and matrix composition at older age.

  8. Age-Dependent Changes in Geometry, Tissue Composition and Mechanical Properties of Fetal to Adult Cryopreserved Human Heart Valves

    Science.gov (United States)

    van Geemen, Daphne; Soares, Ana L. F.; Oomen, Pim J. A.; Driessen-Mol, Anita; Janssen-van den Broek, Marloes W. J. T.; van den Bogaerdt, Antoon J.; Bogers, Ad J. J. C.; Goumans, Marie-José T. H.; Baaijens, Frank P. T.; Bouten, Carlijn V. C.

    2016-01-01

    There is limited information about age-specific structural and functional properties of human heart valves, while this information is key to the development and evaluation of living valve replacements for pediatric and adolescent patients. Here, we present an extended data set of structure-function properties of cryopreserved human pulmonary and aortic heart valves, providing age-specific information for living valve replacements. Tissue composition, morphology, mechanical properties, and maturation of leaflets from 16 pairs of structurally unaffected aortic and pulmonary valves of human donors (fetal-53 years) were analyzed. Interestingly, no major differences were observed between the aortic and pulmonary valves. Valve annulus and leaflet dimensions increase throughout life. The typical three-layered leaflet structure is present before birth, but becomes more distinct with age. After birth, cell numbers decrease rapidly, while remaining cells obtain a quiescent phenotype and reside in the ventricularis and spongiosa. With age and maturation–but more pronounced in aortic valves–the matrix shows an increasing amount of collagen and collagen cross-links and a reduction in glycosaminoglycans. These matrix changes correlate with increasing leaflet stiffness with age. Our data provide a new and comprehensive overview of the changes of structure-function properties of fetal to adult human semilunar heart valves that can be used to evaluate and optimize future therapies, such as tissue engineering of heart valves. Changing hemodynamic conditions with age can explain initial changes in matrix composition and consequent mechanical properties, but cannot explain the ongoing changes in valve dimensions and matrix composition at older age. PMID:26867221

  9. Trace elements and organic compounds in sediment and fish tissue from the Great Salt Lake basins, Utah, Idaho, and Wyoming, 1998-99

    Science.gov (United States)

    Waddell, Kidd M.; Giddings, Elise M.

    2004-01-01

    A study to determine the occurrence and distribution of trace elements, organochlorine pesticides, polychlorinated biphenyls (PCBs), and semivolatile organic compounds in sediment and in fish tissue was conducted in the Great Salt Lake Basins study unit of the National Water-Quality Assessment (NAWQA) program during 1998-99. Streambed-sediment and fish-tissue samples were collected concurrently at 11 sites and analyzed for trace-element concentration. An additional four sites were sampled for streambed sediment only and one site for fish tissue only. Organic compounds were analyzed from streambed-sediment and fish-tissue samples at 15 sites concurrently.Bed-sediment cores from lakes, reservoirs, and Farmington Bay collected by the NAWQA program in 1998 and by other researchers in 1982 were used to examine historical trends in trace-element concentration and to determine anthropogenic sources of contaminants. Cores collected in 1982 from Mirror Lake, a high-mountain reference location, showed an enrichment of arsenic, cadmium, copper, lead, tin, and zinc in the surface sediments relative to the deeper sediments, indicating that enrichment likely began after about 1900. This enrichment was attributed to atmospheric deposition during the period of metal-ore mining and smelting. A core from Echo Reservoir, in the Weber River Basin, however, showed a different pattern of trace-element concentration that was attributed to a local source. This site is located downstream from the Park City mining district, which is the most likely historical source of trace elements. Cores collected in 1998 from Farmington Bay show that the concentration of lead began to increase after 1842 and peaked during the mid-1980s and has been in decline since. Recent sediments deposited during 1996-98 indicate a 41- to 62-percent reduction since the peak in the mid-1980s.The concentration of trace elements in streambed sediment was greatest at sites that have been affected by historic mining

  10. In situ comparison of varying composite tibial tunnel interference screws used for ACL soft tissue graft fixation.

    Science.gov (United States)

    Nyland, John; Krupp, Ryan; Greene, Joe; Bowles, Richard; Burden, Robert; Caborn, David N M

    2015-12-01

    This mechanical study using an in vitro porcine model compared composite interference screw fixation of soft tissue ACL grafts in tibial tunnels. Forty-eight porcine profundus tendons and tibiae were divided into four groups of 12 closely matched specimens. Equivalent diameter grafts were assigned to each group. Tibial bone tunnels were drilled to 0.5mm greater than graft diameter. Grafts were fixed in tunnels using one 10 × 35 mm composite interference screw designed by four different manufacturers. Maximal insertion torque and perceived within group mechanical testing outcome predictions were recorded. Constructs were potted and loaded into a six degrees of freedom clamp that placed the servohydraulic device tensile loading vector in direct tunnel alignment. Constructs were pre-loaded to 25 N, pre-conditioned between 0 and 50 N for 10 cycles (0.5 Hz), submaximally tested between 50 and 250 N for 500 cycles (one hertz) and load to failure tested at 20mm/min. Statistically significant differences were not observed between groups for displacement during submaximal cyclic loading, yield load, displacement at yield load, stiffness, ultimate load at failure and displacement at ultimate load. One composite screw group displayed a slightly greater proportion of specimens that required use of more than one screw during insertion. Under highly controlled conditions groups displayed comparable fixation. Copyright © 2015 Elsevier B.V. All rights reserved.

  11. Development and application of radioimmunological methods to determine an anabolic compound (trenboloneacetate sup(R)) and its major metabolite (trenbolone) in various tissues and in bovine plasma

    International Nuclear Information System (INIS)

    Oettel, G.M.

    1976-01-01

    For quantitation of the anabolic compound trenboloneacetate sup(R)(TBA) and its major metabolite trenbolone (TBOH) a radioimmunoassay (RIA) was established after raising antibodies in rabbits immunized with TBA-3-(o-carboxi-methyl)-oxime-BSA and TBOH-17β-hemisuccinate-BSA. In order to apply this assay for residue determinations in muscle, liver kidney and fat as well as in plasma of treated animals specific extraction procedures were developed. Specifity, sensitivity, accuracy and reproductibility were tested and the developed methods were shown to be highly reliable. Besides free also conjugated TBOH could be determined after enzyme hydrolysis. The lower limit of sensitivity was around 45 pg; at present 100 tissue samples can be analyzed by one person during one week. With the methods described tissue and plasma samples of 41 heifer calves, 10 bull calves and two steers were analyzed for residues of TBA and TBOH. The animals were treated with various dosages of TBA, alone or in combination with oestradiol-17β. In treated animals the highest residue levels were found in liver, with conjugated TBOH being the major residue fraction (76,4%). Second ranking after liver were fat and kidney tissue with similarly high total residue concentrations, however, free TBOH being the major residue fraction (84,1%) in fat, while each, free and conjugated TBOH, accounted for about 50% in kidney. Lowest residue concentrations with free TBOH being the major residue fraction (91,5%) were found in general in muscular tissue. TBA could only be quantitated in fat (14.2% of total residues). (orig.) [de

  12. Water Table Depth Reconstruction in Ombrotrophic Peatlands Using Biomarker Abundance Ratios and Compound-Specific Hydrogen Isotope Composition

    Science.gov (United States)

    Nichols, J. E.; Jackson, S. T.; Booth, R. K.; Pendall, E. G.; Huang, Y.

    2005-12-01

    Sediment cores from ombrotrophic peat bogs provide sensitive records of changes in precipitation/evaporation (P/E) balance. Various proxies have been developed to reconstruct surface moisture conditions in peat bogs, including testate amoebae, plant macrofossils, and peat humification. Studying species composition of testate amoeba assemblages is time consuming and requires specialized training. Humification index can be influenced by environmental factors other than moisture balance. The plant macrofossil proxy is less quantitative and cannot be performed on highly decomposed samples. We demonstrate that the ratio of C23 alkane to C29 alkane abundance may provide a simple alternative or complementary means of tracking peatland water-table depth. Data for this proxy can be collected quickly using a small sample (100 mg dry). Water-table depth decreases during drought, and abundance of Sphagnum, the dominant peat-forming genus, decreases as vascular plants increase. Sphagnum moss produces mainly medium chain-length alkanes (C21-C25) while vascular plants (grasses and shrubs) produce primarily longer chain-length alkanes (C27-C31). Therefore, C23:C29 n-alkane ratios quantitatively track the water table depth fluctuations in peat bogs. We compared C23:C29 n-alkane ratios in a core from Minden Bog (southeastern Michigan) with water table depth reconstructions based on testate-amoeba assemblages and humification. The 184-cm core spans the past ~3kyr of continuous peat deposition in the bog. Our results indicate that the alkane ratios closely track the water table depth variations, with C29 most abundant during droughts. We also explored the use of D/H ratios in Sphagnum biomarkers as a water-table depth proxy. Compound-specific hydrogen isotope ratio analyses were performed on Sphagnum biomarkers: C23 and C25 alkane and C24 acid. Dry periods are represented in these records by an enrichment of deuterium in these Sphagnum-specific compounds. These events also correlate

  13. AS160 deficiency causes whole-body insulin resistance via composite effects in multiple tissues.

    Science.gov (United States)

    Wang, Hong Yu; Ducommun, Serge; Quan, Chao; Xie, Bingxian; Li, Min; Wasserman, David H; Sakamoto, Kei; Mackintosh, Carol; Chen, Shuai

    2013-01-15

    AS160 (Akt substrate of 160 kDa) is a Rab GTPase-activating protein implicated in insulin control of GLUT4 (glucose transporter 4) trafficking. In humans, a truncation mutation (R363X) in one allele of AS160 decreased the expression of the protein and caused severe postprandial hyperinsulinaemia during puberty. To complement the limited studies possible in humans, we generated an AS160-knockout mouse. In wild-type mice, AS160 expression is relatively high in adipose tissue and soleus muscle, low in EDL (extensor digitorum longus) muscle and detectable in liver only after enrichment. Despite having lower blood glucose levels under both fasted and random-fed conditions, the AS160-knockout mice exhibited insulin resistance in both muscle and liver in a euglycaemic clamp study. Consistent with this paradoxical phenotype, basal glucose uptake was higher in AS160-knockout primary adipocytes and normal in isolated soleus muscle, but their insulin-stimulated glucose uptake and overall GLUT4 levels were markedly decreased. In contrast, insulin-stimulated glucose uptake and GLUT4 levels were normal in EDL muscle. The liver also contributes to the AS160-knockout phenotype via hepatic insulin resistance, elevated hepatic expression of phosphoenolpyruvate carboxykinase isoforms and pyruvate intolerance, which are indicative of increased gluconeogenesis. Overall, as well as its catalytic function, AS160 influences expression of other proteins, and its loss deregulates basal and insulin-regulated glucose homoeostasis, not only in tissues that normally express AS160, but also by influencing liver function.

  14. UV-B Radiation Impacts Shoot Tissue Pigment Composition in Allium fistulosum L. Cultigens

    Science.gov (United States)

    Abney, Kristin R.; Kopsell, Dean A.; Sams, Carl E.; Zivanovic, Svetlana; Kopsell, David E.

    2013-01-01

    Plants from the Allium genus are valued worldwide for culinary flavor and medicinal attributes. In this study, 16 cultigens of bunching onion (Allium fistulosum L.) were grown in a glasshouse under filtered UV radiation (control) or supplemental UV-B radiation [7.0 μmol·m−2 ·s−2 (2.68 W·m−2)] to determine impacts on growth, physiological parameters, and nutritional quality. Supplemental UV-B radiation influenced shoot tissue carotenoid concentrations in some, but not all, of the bunching onions. Xanthophyll carotenoid pigments lutein and β-carotene and chlorophylls a and b in shoot tissues differed between UV-B radiation treatments and among cultigens. Cultigen “Pesoenyj” responded to supplemental UV-B radiation with increases in the ratio of zeaxanthin + antheraxanthin to zeaxanthin + antheraxanthin + violaxanthin, which may indicate a flux in the xanthophyll carotenoids towards deepoxydation, commonly found under high irradiance stress. Increases in carotenoid concentrations would be expected to increase crop nutritional values. PMID:23606817

  15. PLA-Based Hybrid and Composite Electrospun Fibrous Scaffolds as Potential Materials for Tissue Engineering

    Directory of Open Access Journals (Sweden)

    Anna Magiera

    2017-01-01

    Full Text Available The aim of the study was to manufacture poly(lactic acid- (PLA- based nanofibrous nonwovens that were modified using two types of modifiers, namely, gelatin- (GEL- based nanofibres and carbon nanotubes (CNT. Hybrid nonwovens consisting of PLA and GEL nanofibres (PLA/GEL, as well as CNT-modified PLA nanofibres with GEL nanofibres (PLA + CNT/GEL, in the form of mats, were manufactured using concurrent-electrospinning technique (co-ES. The ability of such hybrid structures as potential scaffolds for tissue engineering was studied. Both types of hybrid samples and one-component PLA and CNTs-modified PLA mats were investigated using scanning electron microscopy (SEM, water contact angle measurements, and biological and mechanical tests. The morphology, microstructure, and selected properties of the materials were analyzed. Biocompatibility and bioactivity in contact with normal human osteoblasts (NHOst were studied. The coelectrospun PLA and GEL nanofibres retained their structures in hybrid samples. Both types of hybrid nonwovens were not cytotoxic and showed better osteoinductivity in comparison to scaffolds made from pure PLA. These samples also showed significantly reduced hydrophobicity compared to one-component PLA nonwovens. The CNT-contained PLA nanofibres improved mechanical properties of hybrid samples and such a 3D system appears to be interesting for potential application as a tissue engineering scaffold.

  16. Mechanical and biological evaluations of beta-tricalcium phosphate/silicone rubber composite as a novel soft-tissue implant.

    Science.gov (United States)

    Zhang, Yi-ming; Wang, Shao-liang; Lei, Ze-yuan; Fan, Dong-li

    2009-09-01

    Although silicone rubber (SR) implants are most commonly used and effective for soft-tissue augmentation, they still have been implicated in many adverse reactions. To overcome this problem, a novel composite beta-tricalcium phosphate/silicone rubber (beta-TCP/SR) was prepared by adding beta-TCP into a SR matrix. This study was to evaluate its application potential by investigating the mechanical properties and biocompatibility of beta-TCP/SR. Mechanical properties, including Shore A hardness and tensile strength, were evaluated with 3-mm-thick samples and a universal testing machine. Cytocompatibility tests were conducted in vitro using 0.2-mm-thick beta-TCP/SR samples by seeding fibroblasts onto different samples. Soft-tissue response to beta-TCP/SR and pull-out measurements were investigated 4 weeks and 24 weeks after implantation. The main mechanical properties were all significantly changed after mixing beta-TCP into the SR matrix, except for tearing strength. The cytocompatibility test showed enhanced adhesion and proliferation of fibroblasts onto beta-TCP/SR. Fibrous tissue ingrowth after resorption of beta-TCP was observed by in vivo histologic analysis. The peri-implant capsules in the beta-TCP/SR group were thinner than in the SR group 24 weeks after implantation. In a 24-week test, the maximum force required to pull out the beta-TCP/SR sheet was about six times greater than that needed for SR. Although some mechanical properties were significantly changed, the results of the cytocompatibility test and in vivo animal study still suggest that beta-TCP/SR may be more suitable as a soft-tissue implant than SR and has the potential to be used in plastic surgery.

  17. Raman and Fourier Transform Infrared (FT-IR) Mineral to Matrix Ratios Correlate with Physical Chemical Properties of Model Compounds and Native Bone Tissue.

    Science.gov (United States)

    Taylor, Erik A; Lloyd, Ashley A; Salazar-Lara, Carolina; Donnelly, Eve

    2017-10-01

    Raman and Fourier transform infrared (FT-IR) spectroscopic imaging techniques can be used to characterize bone composition. In this study, our objective was to validate the Raman mineral:matrix ratios (ν 1 PO 4 :amide III, ν 1 PO 4 :amide I, ν 1 PO 4 :Proline + hydroxyproline, ν 1 PO 4 :Phenylalanine, ν 1 PO 4 :δ CH 2 peak area ratios) by correlating them to ash fraction and the IR mineral:matrix ratio (ν 3 PO 4 :amide I peak area ratio) in chemical standards and native bone tissue. Chemical standards consisting of varying ratios of synthetic hydroxyapatite (HA) and collagen, as well as bone tissue from humans, sheep, and mice, were characterized with confocal Raman spectroscopy and FT-IR spectroscopy and gravimetric analysis. Raman and IR mineral:matrix ratio values from chemical standards increased reciprocally with ash fraction (Raman ν 1 PO 4 /Amide III: P IR P IR mineral:matrix ratio values were strongly correlated ( P IR spectra, developed by applying the Beer-Lambert law to calculate the relative extinction coefficients of HA and collagen over the same range of wavenumbers (800-1800 cm -1 ). The results confirm that the Raman mineral:matrix bone composition parameter correlates strongly to ash fraction and to its IR counterpart. Finally, the mineral:matrix ratio values of the native bone tissue are similar to those of both chemical standards and theoretical values, confirming the biological relevance of the chemical standards and the characterization techniques.

  18. Evaluation of Synthesized Nanohydroxyapatite-Nanocellulose Composites as Biocompatible Scaffolds for Applications in Bone Tissue Engineering

    Directory of Open Access Journals (Sweden)

    Claudia S. Herdocia-Lluberes

    2015-01-01

    Full Text Available Basic calcium phosphate (BCP crystals have been associated with many diseases due to their activation of signaling pathways that lead to their mineralization and deposition in intra-articular and periarticular locations in the bones. In this study, hydroxyapatite (HAp has been placed in a polysaccharide network as a strategy to minimize this deposition. This research consisted of the evaluation of varying proportions of the polysaccharide network, cellulose nanocrystals (CNCs, and HAp synthesized via a simple sol-gel method. The resulting biocompatible composites were extensively characterized by means of thermogravimetric analysis (TGA, powder X-ray diffraction (XRD, Fourier transform infrared spectroscopy (FT-IR, dynamic light scattering (DLS, zeta potential, and scanning electron microscopy (SEM. It was found that an nHAp = CNC ratio presented greater homogeneity in the size and distribution of the nanoparticles without compromising the crystalline structure. Also, incorporation of bone morphogenetic protein 2 (BMP-2 was performed to evaluate the effects that this interaction would have in the constructs. Finally, the osteoblast cell (hFOB 1.19 viability assay was executed and it showed that all of the materials promoted greater cell proliferation while the nHAp > CNC proportion with the inclusion of the BMP-2 protein was the best composite for the purpose of this study.

  19. Effects of inhaled citronella oil and related compounds on rat body weight and brown adipose tissue sympathetic nerve.

    Science.gov (United States)

    Batubara, Irmanida; Suparto, Irma H; Sa'diah, Siti; Matsuoka, Ryunosuke; Mitsunaga, Tohru

    2015-03-12

    Citronella oil is one of the most famous Indonesian essential oils, having a distinctive aroma. As with other essential oils, it is crucial to explore the effects of inhalation of this oil. Therefore, the aim of this research was to elucidate the effects of inhalation of citronella oil and its components isolated from Cymbopogon nardus L. (Poaceae), Indonesian local name: "Sereh Wangi" on the body weight, blood lipid profile, and liver function of rats, as well as on the sympathetic nerve activity and temperature of brown adipose tissue. Sprague-Dawley male adult rats fed with high fat diet (HFD) were made to inhale citronella oil, R-(+)-citronellal, and β-citronellol for five weeks, and the observations were compared to those of HFD rats that were not subjected to inhalation treatment. The results showed that inhalation of β-citronellol decreased feed consumption. As a consequence, the percentage of weight gain decreased compared with that in control group and the blood cholesterol level in the β-citronellol group was significantly lowered. Concentration of liver function enzymes were not significantly different among the groups. In conclusion, inhalation of citronella oil, specifically β-citronellol, decreased body weight by decreasing appetite, without any marked changes in liver enzyme concentrations.

  20. Effects of Inhaled Citronella Oil and Related Compounds on Rat Body Weight and Brown Adipose Tissue Sympathetic Nerve

    Directory of Open Access Journals (Sweden)

    Irmanida Batubara

    2015-03-01

    Full Text Available Citronella oil is one of the most famous Indonesian essential oils, having a distinctive aroma. As with other essential oils, it is crucial to explore the effects of inhalation of this oil. Therefore, the aim of this research was to elucidate the effects of inhalation of citronella oil and its components isolated from Cymbopogon nardus L. (Poaceae, Indonesian local name: “Sereh Wangi” on the body weight, blood lipid profile, and liver function of rats, as well as on the sympathetic nerve activity and temperature of brown adipose tissue. Sprague-Dawley male adult rats fed with high fat diet (HFD were made to inhale citronella oil, R-(+-citronellal, and β-citronellol for five weeks, and the observations were compared to those of HFD rats that were not subjected to inhalation treatment. The results showed that inhalation of β-citronellol decreased feed consumption. As a consequence, the percentage of weight gain decreased compared with that in control group and the blood cholesterol level in the β-citronellol group was significantly lowered. Concentration of liver function enzymes were not significantly different among the groups. In conclusion, inhalation of citronella oil, specifically β-citronellol, decreased body weight by decreasing appetite, without any marked changes in liver enzyme concentrations.

  1. Hepatic fat fraction and visceral adipose tissue fatty acid composition in mice: Quantification with 7.0T MRI.

    Science.gov (United States)

    Leporq, Benjamin; Lambert, Simon A; Ronot, Maxime; Boucenna, Imane; Colinart, Pierre; Cauchy, Francois; Vilgrain, Valerie; Paradis, Valerie; Van Beers, Bernard E

    2016-08-01

    To develop an MRI method for quantifying hepatic fat content and visceral adipose tissue fatty acid composition in mice on a 7.0T preclinical system. MR acquisitions were performed with a multiple echo spoiled gradient echo with bipolar readout gradients. After phase correction, the number of double bounds (ndb) and the number of methylene interrupted double bounds (nmidb) were quantified with a model including eight fat components, and parametric maps of saturated, monounsaturated, and polyunsaturated fatty acids were derived. The model included a complex error map to correct for the phase errors and the amplitude modulation caused by the bipolar acquisition. Validations were performed in fat-water emulsions and vegetable oils. In vivo, the feasibility was evaluated in mice receiving a high-fat diet containing primarily saturated fatty acids and a low-fat diet containing primarily unsaturated fatty acids. Linear regressions showed strong agreements between ndb and nmidb quantified with MRI and the theoretical values calculated using oil compositions, as well as between the proton density and the fat fractions in the emulsions. At MRI, the mouse liver fat fraction was smaller in mice fed the low-fat diet compared with mice fed the high-fat diet. In visceral adipose tissue, saturated fatty acids were significantly higher, whereas monounsaturated and polyunsaturated fatty acids were significantly lower in mice fed the low-fat diet compared with mice fed the high-fat diet. It is feasible to simultaneously quantify hepatic fat content and visceral adipose tissue fatty acid composition with 7.0T MRI in mice. Magn Reson Med 76:510-518, 2016. © 2015 The Authors. Magnetic Resonance in Medicine published by Wiley Periodicals, Inc. on behalf of International Society for Magnetic Resonance in Medicine. This is an open access article under the terms of the Creative Commons Attribution NonCommercial License, which permits use, distribution and reproduction in any medium

  2. Infectious bursal disease virus infection leads to changes in the gut associated-lymphoid tissue and the microbiota composition.

    Science.gov (United States)

    Li, Li; Kubasová, Tereza; Rychlik, Ivan; Hoerr, Frederic J; Rautenschlein, Silke

    2018-01-01

    Infectious bursal disease (IBD) is an acute, highly contagious and immunosuppressive poultry disease. IBD virus (IBDV) is the causative agent, which may lead to high morbidity and mortality rates in susceptible birds. IBDV-pathogenesis studies have focused mainly on primary lymphoid organs. It is not known if IBDV infection may modify the development of the gut associated lymphoid tissues (GALT) as well as the microbiota composition. The aim of the present study was to investigate the effects of IBDV-infection on the bursa of Fabricius (BF), caecal tonsils (CT) and caecum, and to determine the effects on the gut microbiota composition in the caecum. Commercial broiler chickens were inoculated with a very virulent (vv) strain of IBDV at 14 (Experiment 2) or 15 (Experiment 1) days post hatch (dph). Virus replication, lesion development, immune parameters including numbers of T and B lymphocytes, macrophages, as well as the gut microbiota composition were compared between groups. Rapid IBDV-replication was detected in the BF, CT and caecum. It was accompanied by histological lesions including an infiltration of heterophils. In addition a significant reduction in the total mucosal thickness of the caecum was observed in vvIBDV-infected birds compared to virus-free controls (P < 0.05). vvIBDV infection also led to an increase in T lymphocyte numbers and macrophages, as well as a decrease in the number of B lymphocytes in the lamina propria of the caecum, and in the caecal tonsils. Illumina sequencing analysis indicated that vvIBDV infection also induced changes in the abundance of Clostridium XIVa and Faecalibacterium over time. Overall, our results suggested that vvIBDV infection had a significant impact on the GALT and led to a modulation of gut microbiota composition, which may lead to a higher susceptibility of affected birds for pathogens invading through the gut.

  3. Infectious bursal disease virus infection leads to changes in the gut associated-lymphoid tissue and the microbiota composition.

    Directory of Open Access Journals (Sweden)

    Li Li

    Full Text Available Infectious bursal disease (IBD is an acute, highly contagious and immunosuppressive poultry disease. IBD virus (IBDV is the causative agent, which may lead to high morbidity and mortality rates in susceptible birds. IBDV-pathogenesis studies have focused mainly on primary lymphoid organs. It is not known if IBDV infection may modify the development of the gut associated lymphoid tissues (GALT as well as the microbiota composition. The aim of the present study was to investigate the effects of IBDV-infection on the bursa of Fabricius (BF, caecal tonsils (CT and caecum, and to determine the effects on the gut microbiota composition in the caecum. Commercial broiler chickens were inoculated with a very virulent (vv strain of IBDV at 14 (Experiment 2 or 15 (Experiment 1 days post hatch (dph. Virus replication, lesion development, immune parameters including numbers of T and B lymphocytes, macrophages, as well as the gut microbiota composition were compared between groups. Rapid IBDV-replication was detected in the BF, CT and caecum. It was accompanied by histological lesions including an infiltration of heterophils. In addition a significant reduction in the total mucosal thickness of the caecum was observed in vvIBDV-infected birds compared to virus-free controls (P < 0.05. vvIBDV infection also led to an increase in T lymphocyte numbers and macrophages, as well as a decrease in the number of B lymphocytes in the lamina propria of the caecum, and in the caecal tonsils. Illumina sequencing analysis indicated that vvIBDV infection also induced changes in the abundance of Clostridium XIVa and Faecalibacterium over time. Overall, our results suggested that vvIBDV infection had a significant impact on the GALT and led to a modulation of gut microbiota composition, which may lead to a higher susceptibility of affected birds for pathogens invading through the gut.

  4. Leg tissue composition of goat kids according to racial group, weight and gender

    Directory of Open Access Journals (Sweden)

    Brenda Batista Lemos Medeiros

    2011-01-01

    Full Text Available To evaluate the effect of breed group, slaughter weight and sex on tissue proportion of the leg and muscle, bone and fat ratio in confined kids, seventy-four goats of both sex were used and divided among breed groups: Alpine (A, ½ Nubian + ½ Alpine (½ ANA, ½ Boer + ½ Alpine (½ BA, ¾ Boer + ¼ Alpine (¾ BA and ½ Nubian + ¼ Alpine + ¼ Boer, (Three cross - TC, at three slaughter weights (25, 30 and 35 kg. Leg represented 31.01% of half carcass, where 62.29% was total muscle, 21.45% total bone and 8.35% total fat. Alpine animals had higher bone weight than other groups. Male kids had higher muscle and bone proportion, whereas females had higher subcutaneous and intramuscular fat in leg. The percentage of total weight of the muscle, five muscles, adductor muscle, quadriceps muscle and femur were higher in the slaughter weights of 25 and 30 kg.

  5. Ultrasound assisted extraction of bioactive compounds from Nephelium lappaceum L. fruit peel using central composite face centered response surface design

    Directory of Open Access Journals (Sweden)

    J. Prakash Maran

    2017-02-01

    Full Text Available In this study, four factors at three level central composite face centered design was employed to study and optimize the process variables on extraction of bioactive compounds (total anthocyanin, phenolic and flavonoid content from Nephelium lappaceum L. fruit peel. The effect of process variables such as extraction temperature (30–50 °C, power of ultrasound (20–40 W, extraction time (10–30 min and solid–liquid ratio (1:10–1:20 g/ml is studied. Multiple regression analysis was done on the experimental data to develop second-order polynomial models with high coefficient of determination value (R2 > 0.99. The optimal conditions based on both individual and combinations of all process variables (extraction temperature of 50 °C, ultrasound power of 20 W, extraction time of 20 min and solid–liquid ratio of 1:18.6 g/ml were determined by Derringer’s desired function methodology. Under these conditions, total anthocyanin (10.26 ± 0.39 (mg/100 g, phenolics (552.64 ± 1.57 (mg GAE/100 g and flavonoid (104 ± 1.13 (mg RE/100 g content values were determined and it is closely related with the predicted values (10.17 mg/100 g of total anthocyanin, 546.98 mg GAE/100 g of total phenolics and 100.93 mg RE/100 g of total flavonoid content and indicted the suitability of the developed models.

  6. Nutritional composition, antinutritional factors, bioactive compounds and antioxidant activity of guava seeds (Psidium Myrtaceae) as affected by roasting processes.

    Science.gov (United States)

    El Anany, Ayman Mohammed

    2015-04-01

    The purpose of this study was to explore the influences of roasting process on the nutritional composition and nutritive value, antinutritional factors, bioactive compounds and antioxidant activity of guava seeds. Roasting process caused significant (P ≤ 0.05) decreases in moisture content, crude protein, crude fiber, ash and mineral contents, isoleucine, arginine, glutamic and total aromatic and sulfur amino acids, antinutritional factors (tannins and phytic acid) and flavonoids, while oil content increased. Subjecting guava seeds to 150 °C for 10, 15 and 20 min increased the total essential amino acids from 35.19 g/100 g protein in the raw sample to 36.96, 37.30 and 37.47 g/100 g protein in roasted samples, respectively. Protein efficiency ratio (PER) of guava seeds roasted at 150 °C for 10, 15 and 20 min were about 1.08, 1.14 and 1.18 times as high as that in unroasted seeds. Lysine was the first limiting amino acid, while leucine was the second limiting amino acid in raw and roasted guava seeds. Total phenolic contents was significantly (P ≤ 0.05) increased by roasting at 150 °C for 10 min. However, roasting at 150 °C for 15 and 20 min caused significant decrease in the phenolic content of guava seeds. Guava seeds subjected to roasting process showed higher DPPH radical scavenging and reducing power activities.

  7. Emissions of volatile organic compounds (VOCs) from concentrated animal feeding operations (CAFOs): chemical compositions and separation of sources

    Science.gov (United States)

    Yuan, Bin; Coggon, Matthew M.; Koss, Abigail R.; Warneke, Carsten; Eilerman, Scott; Peischl, Jeff; Aikin, Kenneth C.; Ryerson, Thomas B.; de Gouw, Joost A.

    2017-04-01

    Concentrated animal feeding operations (CAFOs) emit a large number of volatile organic compounds (VOCs) to the atmosphere. In this study, we conducted mobile laboratory measurements of VOCs, methane (CH4) and ammonia (NH3) downwind of dairy cattle, beef cattle, sheep and chicken CAFO facilities in northeastern Colorado using a hydronium ion time-of-flight chemical-ionization mass spectrometer (H3O+ ToF-CIMS), which can detect numerous VOCs. Regional measurements of CAFO emissions in northeastern Colorado were also performed using the NOAA WP-3D aircraft during the Shale Oil and Natural Gas Nexus (SONGNEX) campaign. Alcohols and carboxylic acids dominate VOC concentrations and the reactivity of the VOCs with hydroxyl (OH) radicals. Sulfur-containing and phenolic species provide the largest contributions to the odor activity values and the nitrate radical (NO3) reactivity of VOC emissions, respectively. VOC compositions determined from mobile laboratory and aircraft measurements generally agree well with each other. The high time-resolution mobile measurements allow for the separation of the sources of VOCs from different parts of the operations occurring within the facilities. We show that the emissions of ethanol are primarily associated with feed storage and handling. Based on mobile laboratory measurements, we apply a multivariate regression analysis using NH3 and ethanol as tracers to determine the relative importance of animal-related emissions (animal exhalation and waste) and feed-related emissions (feed storage and handling) for different VOC species. Feed storage and handling contribute significantly to emissions of alcohols, carbonyls, carboxylic acids and sulfur-containing species. Emissions of phenolic species and nitrogen-containing species are predominantly associated with animals and their waste.

  8. Airborne particulate endocrine disrupting compounds in China: Compositions, size distributions and seasonal variations of phthalate esters and bisphenol A

    Science.gov (United States)

    Li, Jianjun; Wang, Gehui

    2015-03-01

    Phthalate esters and bisphenol A (BPA) are endocrine disrupting compounds (EDCs) and ubiquitously occur in the environment. In the past decade we have characterized atmospheric organic aerosols from various environments (e.g., urban, rural, mountain and marine) of East Asia on a molecular level, but not investigated EDCs in the samples. In the current study we re-analyzed our database for concentrations, compositions and size distributions of phthalates and BPA and compared with those in the literature to improve the understanding on air pollution status in China. Our results showed that airborne particulate phthalates and BPA are 63-1162 ng m- 3 and 1.0-20 ng m- 3 in the urban regions in China, respectively, being one to two orders of magnitude higher than those in the developed countries. Among the detected phthalates in Chinese urban areas, bis(2-ethylhexyl) phthalate (BEHP) is the predominant congener, contributing to 23-79% (ave. 53 ± 15%) of the total phthalates. Concentrations of phthalates and bisphenol A in Shanghai and Xi'an (two mega-cities in China) in 2009 were 3-84% lower than those in 2003, probably indicating a positive effect of the government's air pollution control in the recent years. Phthalates are higher in summer than in winter, because they are not chemically bonded to the polymeric matrix and more easily evaporate into the air under higher temperature conditions. Based on the size distribution observation, we found that diisobutyl and dibutyl phthalates mainly exist in coarse particles because of high volatilities, in contrast to BEHP and BPA, which are dominant in fine particles due to less volatility. Our results also indicate that BPA is mostly derived from the open burning of solid waste while phthalates are derived from both direct evaporation from the matrix and solid waste combustion.

  9. Dose Distribution According to the Tissue Composition Using Wedge Filter by Radiochromic Film

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yon Lae [Dept. of Radiologic Technology, Choonhae College of Health Sciences, Ulsan (Korea, Republic of); Lee, Jeong Woo; Park, Byung Moon [Dept. of Radiation Oncology, Konku University Hospital, Seoul (Korea, Republic of); Jung, Jae Yong; Park, Ji Yeon; Suh, Tae Suk [Dept. of Biomedical Engineering, Catholic University, Seoul (Korea, Republic of)

    2012-06-15

    The purpose of this study is to analyze the dose distribution when wedge filter is used in the various tissue electron density materials. The dose distribution was assessed that the enhanced dynamic wedge filter and physical wedge filter were used in the solid water phantom, cork phantom, and air cavity. The film dosimetry was suitable simple to measure 2D dose distribution. Therefore, the radiochromic films (Gafchromic EBT2, ISP, NJ, USA) were selected to measure and to analyze the dose distributions. A linear accelerator using 6 MV photon were irradiated to field size of 10 x10 cm{sup 2} with 400 MUs. The dose distributions of EBT2 films were analyzed the in-field area and penumbra regions by using dose analysis program. In the dose distributions of wedge field, the dose from a physical wedge was higher than that from a dynamic wedge at the same electron density materials. A dose distributions of wedge type in the solid water phantom and the cork phantom were in agreements with 2%. However, the dose distribution in air cavity showed the large difference with those in the solid water phantom or cork phantom dose distributions. Dose distribution of wedge field in air cavity was not shown the wedge effect. The penumbra width, out of the field of thick and thin, was observed larger from 1 cm to 2 cm at the thick end. The penumbra of physical wedge filter was much larger average 6% than the dynamic wedge filter. If the physical wedge filter is used, the dose was increased to effect the scatter that interacted with photon and physical wedge. In the case of difference in electron like the soft tissue, lung, and air, the transmission, absorption, and scattering were changed in the medium at high energy photon. Therefore, the treatment at the difference electron density should be inhomogeneity correction in treatment planning system.

  10. Substituting ground woody plants for cottonseed hulls in lamb feedlot diets: carcass characteristics, adipose tissue fatty acid composition, and sensory panel traits.

    Science.gov (United States)

    Kerth, Christopher R; Wall, Kayley R; Smith, Stephen B; Whitney, Travis Raymond; Glasscock, Jessica L; Sawyer, Jason T

    2018-03-06

    Effects of using ground woody plants in Rambouillet wether lamb (n = 48) feedlot diets on carcass characteristics, adipose tissue fatty acid composition, and sensory panel traits were evaluated. In a randomized design study with two feeding periods (period 1 = fed a 70% concentrate diet from days 0 to 27; period 2 = fed an 86% concentrate diet from days 28 to 57), lambs were individually fed six diets that differed only by roughage source (n = 8 animals/treatment; initial BW = 32.9 ± 3.2 kg): cottonseed hulls (CSH; control) or ground wood consisting of either redberry (RED), blueberry (BLUE), one-seed (ONE), or eastern red cedar (ERC) Juniperus spp., or Prosopis glandulosa (MESQ). After 57 d, the lambs were humanely harvested and after chilling (2 ± 1 oC) 24 h, carcasses were evaluated for carcass traits. At 48 h postmortem, the longissimus thoracis (LT) was removed from the left side of the carcass, and after freezing for no more than 3 mo, were thawed for 24 h, cooked, and evaluated by a trained sensory panel. Additionally, volatile aroma chemicals on the LT were determined by gas chromatograph/mass spectrometer/olfactory (GC/MS/OF, respectively) analyses. Lamb HCW was greater (P = 0.01) for lambs fed CSH compared with all other diets, but lambs had similar (P > 0.08) LM area, back fat thickness, leg circumference, and body wall. Neither adipose tissue fatty acid composition (P > 0.08) nor trained sensory panel evaluation (P > 0.18) was affected by finishing diet roughage source. Of the 81 volatile aroma compounds found in the grilled lamb chops, only seven were affected (P < 0.05) by dietary roughage source and included 1-pentanol (a sweet, pleasant aroma), heptenal (a fishy aroma), pentanal (fermented, bready aroma description), 1-(1H-pyrol-2yl)-ethanone (caramel-like), 2-heptanone (cheesy, banana, fruity aromatic), 6,7-dodecanedione (unknown aroma), and butanoic acid (a sweaty, rancid aroma). The addition of any of four species of juniper or mesquite may be

  11. Outsourcing neural active control to passive composite mechanics: a tissue engineered cyborg ray

    Science.gov (United States)

    Gazzola, Mattia; Park, Sung Jin; Park, Kyung Soo; Park, Shirley; di Santo, Valentina; Deisseroth, Karl; Lauder, George V.; Mahadevan, L.; Parker, Kevin Kit

    2016-11-01

    Translating the blueprint that stingrays and skates provide, we create a cyborg swimming ray capable of orchestrating adaptive maneuvering and phototactic navigation. The impossibility of replicating the neural system of batoids fish is bypassed by outsourcing algorithmic functionalities to the body composite mechanics, hence casting the active control problem into a design, passive one. We present a first step in engineering multilevel "brain-body-flow" systems that couple sensory information to motor coordination and movement, leading to behavior. This work paves the way for the development of autonomous and adaptive artificial creatures able to process multiple sensory inputs and produce complex behaviors in distributed systems and may represent a path toward soft-robotic "embodied cognition".

  12. Chemical Composition and Antioxidant Activity in Different Tissues of Brassica Vegetables

    Directory of Open Access Journals (Sweden)

    Shiva Ram Bhandari

    2015-01-01

    Full Text Available This research was conducted to evaluate glucosinolate profiles, vitamin C, total phenol, total flavonoid, and free sugar (glucose, fructose, and sucrose content, fatty acid composition, and antioxidant activity in floret and leaf of six cauliflower and broccoli cultivars. The level of chemical constituents as well as antioxidants significantly varied among crop types, cultivars, and their different parts, in that phytochemicals such as glucosinolate were statistically higher in florets compared with leaves in both broccoli and cauliflower cultivars. In contrast, total flavonoid and free sugar were found at higher levels in the leaf parts. The Asia purple cultivar exhibited statistically higher vitamin C (649.7 mg·100 g−1, total phenol (1345.2 mg·GAE 100 g−1, and total flavonoid (632.7 mg·CE 100 g−1 contents and consequently had the highest antioxidant activity (1.12 mg·mL−1 in its florets, while Baeridom and Bridal had the highest total glucosinolate (9.66 µmol·g−1 and free sugar (318.6 mg·g−1 contents, respectively compared with other cultivars. Likewise, the major fatty acids were palmitic (23.52%–38.42%, linoleic (13.09%–18.97%, and linolenic (26.32%–51.80% acids, which comprised the highest compositional ratio (more than 50% of polyunsaturated fatty acids (PUFAs in most cultivars. Among the antioxidants, total phenol exhibited the most significant positive correlation (r = 0.698 ** with antioxidant activity, followed by vitamin C (r = 0.522 ** and total flavonoid (r = 0.494 **, indicating their significant contributions to total antioxidant activity.

  13. Confirmation of 1-Phenylethane-1-thiol as the Character Impact Aroma Compound in Curry Leaves and Its Behavior during Tissue Disruption, Drying, and Frying.

    Science.gov (United States)

    Steinhaus, Martin

    2017-03-15

    The most odor-active compounds previously identified by application of an aroma extract dilution analysis were quantitated in freshly picked curry leaves, either by stable isotope dilution assays in combination with GC-GC-MS or by GC-FID after simultaneous extraction/fractionation. Odor activity values (OAVs) were calculated as ratios of concentrations to odor threshold values. The topmost OAVs were obtained for (3Z)-hex-3-enal (grassy; OAV 180 000), (1S)-1-phenylethane-1-thiol (sulfury, burnt; OAV 150 000), (1R)-1-phenylethane-1-thiol (sulfury, burnt; OAV 120 000), (3R)-linalool (citrusy; OAV 58 000), and myrcene (geranium leaf-like; OAV 23 000). The high OAVs calculated for its enantiomers confirmed 1-phenylethane-1-thiol as character impact compound of the typical sulfury and burnt aroma of curry leaves. The 1-phenylethane-1-thiol concentration in curry leaves decreased upon tissue disruption and drying, as well as upon frying of fresh leaves. By contrast, frying of dried leaves led to an increase of 1-phenylethane-1-thiol, indicating a yet unknown thermolabile precursor.

  14. Safety and efficacy of composite collagen-silver nanoparticle hydrogels as tissue engineering scaffolds

    Science.gov (United States)

    Alarcon, Emilio I.; Udekwu, Klas I.; Noel, Christopher W.; Gagnon, Luke B.-P.; Taylor, Patrick K.; Vulesevic, Branka; Simpson, Madeline J.; Gkotzis, Spyridon; Islam, M. Mirazul; Lee, Chyan-Jang; Richter-Dahlfors, Agneta; Mah, Thien-Fah; Suuronen, Erik J.; Scaiano, Juan C.; Griffith, May

    2015-11-01

    The increasing number of multidrug resistant bacteria has revitalized interest in seeking alternative sources for controlling bacterial infection. Silver nanoparticles (AgNPs), are amongst the most promising candidates due to their wide microbial spectrum of action. In this work, we report on the safety and efficacy of the incorporation of collagen coated AgNPs into collagen hydrogels for tissue engineering. The resulting hybrid materials at [AgNPs] lyophilization. Absorption spectra for the washes obtained from a 1.0 μM AgNP hydrogel over the course of 5 days. Area under the curve (AUC) calculated from the absorption spectra of 500 μm thickness collagen hydrogels prepared using different concentrations of AgNP@collagen. Selected Cryo-SEM images of BDDGE type I collagen-based hydrogels in the absence or presence of 1.0 μM AgNP. An image of a selected area of a collagen-based hydrogel prepared using AgNO3 instead of AgNP@collagen nanoparticles and Live/Dead staining of human skin fibroblasts taken for 24 hours. Growth inhibition profile for E. coli, S. aureus, S. epidermidis and P. aeruginosa in the presence of hydrogels containing AgNPs. See DOI: 10.1039/c5nr03826j

  15. Benzylic rearrangement stable isotope labeling for quantitation of guanidino and ureido compounds in thyroid tissues by liquid chromatography-electrospray ionization mass spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Fan, Ruo-Jing [State Key Laboratory of Organmetallic Chemistry and National Center for Organic Mass Spectrometry in Shanghai, Shanghai Institute of Organic Chemistry, Chinese Academy of Sciences, 345 Lingling Road, Shanghai, 200032 (China); Guan, Qing [Department of Head and Neck Surgery, Fudan University Shanghai Cancer Center, Shanghai, 200032 (China); Department of Oncology, Shanghai Medical College, Fudan University, Shanghai, 200032 (China); Zhang, Fang, E-mail: fzhang@sioc.ac.cn [State Key Laboratory of Organmetallic Chemistry and National Center for Organic Mass Spectrometry in Shanghai, Shanghai Institute of Organic Chemistry, Chinese Academy of Sciences, 345 Lingling Road, Shanghai, 200032 (China); Leng, Jia-Peng [State Key Laboratory of Organmetallic Chemistry and National Center for Organic Mass Spectrometry in Shanghai, Shanghai Institute of Organic Chemistry, Chinese Academy of Sciences, 345 Lingling Road, Shanghai, 200032 (China); Sun, Tuan-Qi, E-mail: tuanqisun@163.com [Department of Head and Neck Surgery, Fudan University Shanghai Cancer Center, Shanghai, 200032 (China); Department of Oncology, Shanghai Medical College, Fudan University, Shanghai, 200032 (China); Guo, Yin-Long, E-mail: ylguo@sioc.ac.cn [State Key Laboratory of Organmetallic Chemistry and National Center for Organic Mass Spectrometry in Shanghai, Shanghai Institute of Organic Chemistry, Chinese Academy of Sciences, 345 Lingling Road, Shanghai, 200032 (China)

    2016-02-18

    Benzylic rearrangement stable isotope labeling (BRSIL) was explored to quantify the guanidino and ureido compounds (GCs and UCs). This method employed a common reagent, benzil, to label the guanidino and ureido groups through nucleophilic attacking then benzylic migrating. The use of BRSIL was investigated in the analysis of five GCs (creatine, L-arginine, homoarginine, 4-guanidinobutyric acid, and methylguanidine) and two UCs (urea and citrulline). The labeling was found simple and specific. The introduction of bi-phenyl group and the generation of nitrogen heterocyclic ring in the benzil-d0/d5 labeled GCs and UCs improved the retention behaviors in liquid chromatography (LC) and increased the sensitivity of electrospray ionization mass spectrometry (ESI MS) detection. The fragment ion pairs of m/z 182/187 and m/z 210/215 from the benzil-d0/d5 tags facilitated the discovery of potential GCs and UCs candidates residing in biological matrices. The use of BRSIL combined with LC-ESI MS was applied for simultaneously quantitation of GCs and UCs in thyroid tissues. It was demonstrated that nine GCs and UCs were detected, six of which were further quantified based on corresponding standards. It was concluded that five GCs and UCs (L-arginine, homoarginine, 4-guanidinobutyric acid, methylguanidine, and citrulline) were statistically significantly different (p < 0.05) between the para-carcinoma and carcinoma thyroid tissue samples. - Highlights: • A common reagent, benzil-d0/d5 was employed to label the GCs and UCs through BRSIL. • The benzil-d0/d5 labeling improved the retention behavior in RPLC and increased the sensitivity by ESI MS detection. • BRSIL coupled with LC-ESI MS was applied to the qualitation and quantitation of GCs and UCs in thyroid tissues.

  16. Relevance of fiber integrated gelatin-nanohydroxyapatite composite scaffold for bone tissue regeneration

    Science.gov (United States)

    Halima Shamaz, Bibi; Anitha, A.; Vijayamohan, Manju; Kuttappan, Shruthy; Nair, Shantikumar; Nair, Manitha B.

    2015-10-01

    Porous nanohydroxyapatite (nanoHA) is a promising bone substitute, but it is brittle, which limits its utility for load bearing applications. To address this issue, herein, biodegradable electrospun microfibrous sheets of poly(L-lactic acid)-(PLLA)-polyvinyl alcohol (PVA) were incorporated into a gelatin-nanoHA matrix which was investigated for its mechanical properties, the physical integration of the fibers with the matrix, cell infiltration, osteogenic differentiation and bone regeneration. The inclusion of sacrificial fibers like PVA along with PLLA and leaching resulted in improved cellular infiltration towards the center of the scaffold. Furthermore, the treatment of PLLA fibers with 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide enhanced their hydrophilicity, ensuring firm anchorage between the fibers and the gelatin-HA matrix. The incorporation of PLLA microfibers within the gelatin-nanoHA matrix reduced the brittleness of the scaffolds, the effect being proportional to the number of layers of fibrous sheets in the matrix. The proliferation and osteogenic differentiation of human adipose-derived mesenchymal stem cells was augmented on the fibrous scaffolds in comparison to those scaffolds devoid of fibers. Finally, the scaffold could promote cell infiltration, together with bone regeneration, upon implantation in a rabbit femoral cortical defect within 4 weeks. The bone regeneration potential was significantly higher when compared to commercially available HA (Surgiwear™). Thus, this biomimetic, porous, 3D composite scaffold could be offered as a promising candidate for bone regeneration in orthopedics.

  17. Bone mineral density and elemental composition of bone tissues in "red-boned" Guishan goats.

    Science.gov (United States)

    Wu, Chenchen; Wang, Jianguo; Li, Peng; Liu, Guowen; Li, Xiaobing; Ma, Huarong; Wang, Weizhong; Wang, Zhe; Ge, Changrong; Gao, Shizheng

    2012-12-01

    Red-colored bones were first found in Guishan goats in the 1980s, and they were subsequently designated red-boned Guishan goats. However, the difference remains unclear between the bone mineral density (BMD) or elemental composition in bones between red-boned Guishan goats and common Guishan goats. Analysis of femoral bone samples by dual-energy X-ray absorptiometry and inductively coupled plasma optical emission spectrometry revealed an increase in bone mineral density in the femoral diaphysis and distal femur of red-boned Guishan goats at 18 and 36 months of age. The data revealed that BMD increased in both the red-boned and common Guishan goats from 18 to 36 months of age. The data also indicated that the ratio of the BMD values of red-boned to common Guishan goats was higher at 36 months of age than they were at 18 months of age. Furthermore, the levels of calcium, phosphorus, magnesium, barium, zinc, manganese, and aluminum were significantly higher in red-boned Guishan goats than common Guishan goats at 18 and 36 months of age. The results indicate that the red-boned Guishan goats were linked to the elevated levels of mineral salts observed in the bones and that this in turn may be linked to the elevated BMD levels encountered in red-boned Guishan goats. These reasons may be responsible for the red coloration in the bones of red-boned Guishan goats.

  18. Enhanced Bone Tissue Regeneration by Porous Gelatin Composites Loaded with the Chinese Herbal Decoction Danggui Buxue Tang.

    Directory of Open Access Journals (Sweden)

    Wen-Ling Wang

    Full Text Available Danggui Buxue Tang (DBT is a traditional Chinese herbal decoction containing Radix Astragali and Radix Angelicae sinensis. Pharmacological results indicate that DBT can stimulate bone cell proliferation and differentiation. The aim of the study was to investigate the efficacy of adding DBT to bone substitutes on bone regeneration following bone injury. DBT was incorporated into porous composites (GGT made from genipin-crosslinked gelatin and β-triclacium phosphates as bone substitutes (GGTDBT. The biological response of mouse calvarial bone to these composites was evaluated by in vivo imaging systems (IVIS, micro-computed tomography (micro-CT, and histology analysis. IVIS images revealed a stronger fluorescent signal in GGTDBT-treated defect than in GGT-treated defect at 8 weeks after implantation. Micro-CT analysis demonstrated that the level of repair from week 4 to 8 increased from 42.1% to 71.2% at the sites treated with GGTDBT, while that increased from 33.2% to 54.1% at GGT-treated sites. These findings suggest that the GGTDBT stimulates the innate regenerative capacity of bone, supporting their use in bone tissue regeneration.

  19. Volatile organic compound emissions from the oil and natural gas industry in the Uinta Basin, Utah: point sources compared to ambient air composition

    OpenAIRE

    C. Warneke; F. Geiger; P. M. Edwards; W. Dube; G. Pétron; J. Kofler; A. Zahn; S. S. Brown; M. Graus; J. Gilman; B. Lerner; J. Peischl; T. B. Ryerson; J. A. de Gouw; J. M. Roberts

    2014-01-01

    The emissions of volatile organic compounds (VOCs) associated with oil and natural gas production in the Uinta Basin, Utah were measured at a ground site in Horse Pool and from a NOAA mobile laboratory with PTR-MS instruments. The VOC compositions in the vicinity of individual gas and oil wells and other point sources such as evaporation ponds, compressor stations and injection wells are compared to the measurements at Horse Pool. High mixing ratios of aroma...

  20. The composition of potentially bioactive triterpenoid glycosides in red raspberry is influenced by tissue, extraction procedure and genotype.

    Science.gov (United States)

    McDougall, Gordon J; Allwood, J William; Pereira-Caro, Gema; Brown, Emma M; Latimer, Cheryl; Dobson, Gary; Stewart, Derek; Ternan, Nigel G; Lawther, Roger; O'Connor, Gloria; Rowland, Ian; Crozier, Alan; Gill, Chris I R

    2017-10-18

    The beneficial effects of consumption of berry fruits on a range of chronic diseases has been attributed (at least in part) to the presence of unique phytochemicals. Recently, we identified novel ursolic acid-based triterpenoid glycosides (TTPNs) in raspberry fruit and demonstrated their survival in human ileal fluids after feeding which confirmed their colon-availability in vivo. In this paper, in vitro digestion studies demonstrated that certain TTPNs were stable under gastrointestinal conditions and confirmed that these components may have been responsible for bioactivity noted in previous studies. Sequential extractions of raspberry puree, isolated seeds and unseeded puree showed that certain TTPN components (e.g. peak T1 m/z 679, and T2 m/z 1358) had different extractabilities in water/solvent mixes and were differentially associated with the seeds. Purified seed TTPNs (mainly T1 and T2) were shown to be anti-genotoxic in HT29 and CCD841 cell based in vitro colonocyte models. Further work confirmed that the seeds contained a wider range of TTPN-like components which were also differentially extractable in water/solvent mixes. This differential extractability could influence the TTPN composition and potential bioactivity of the extracts. There was considerable variation in total content of TTPNs (∼3-fold) and TTPN composition across 13 Rubus genotypes. Thus, TTPNs are likely to be present in raspberry juices and common extracts used for bioactivity studies and substantial variation exists in both content and composition due to genetics, tissue source or extraction conditions, which may all affect observed bioactivity.

  1. A New Sample Substrate for Imaging and Correlating Organic and Trace Metal Composition in Biological Cells and Tissues

    International Nuclear Information System (INIS)

    Miller, L.; Wang, Q.; Smith, R.; Zhong, H.; Elliott, D.; Warren, J.

    2007-01-01

    Many disease processes involve alterations in the chemical makeup of tissue. Synchrotron-based infrared (IR) and X-ray fluorescence (XRF) microscopes are becoming increasingly popular tools for imaging the organic and trace metal compositions of biological materials, respectively, without the need for extrinsic labels or stains. Fourier transform infrared microspectroscopy (FTIRM) provides chemical information on the organic components of a material at a diffraction-limited spatial resolution of 2-10 μm in the mid-infrared region. The synchrotron X-ray fluorescence (SXRF) microprobe is a complementary technique used to probe trace element content in the same systems with a similar spatial resolution. However to be most beneficial, it is important to combine the results from both imaging techniques on a single sample, which requires precise overlap of the IR and X-ray images. In this work, we have developed a sample substrate containing a gold grid pattern on its surface, which can be imaged with both the IR and X-ray microscopes. The substrate consists of a low trace element glass slide that has a gold grid patterned on its surface, where the major and minor parts of the grid contain 25 and 12 nm gold, respectively. This grid pattern can be imaged with the IR microscope because the reflectivity of gold differs as a function of thickness. The pattern can also be imaged with the SXRF microprobe because the Au fluorescence intensity changes with gold thickness. The tissue sample is placed on top of the patterned substrate. The grid pattern's IR reflectivity image and the gold SXRF image are used as fiducial markers for spatially overlapping the IR and SXRF images from the tissue. Results show that IR and X-ray images can be correlated precisely, with a spatial resolution of less than one pixel (i.e., 2-3 microns). The development of this new tool will be presented along with applications to paraffin-embedded metalloprotein crystals, Alzheimer's disease, and hair

  2. Heat generated by Er:YAG laser in the pulp chamber of teeth submitted to removal of dental tissue and composite resin

    Science.gov (United States)

    Zanin, Fatima; Brugnera, Aldo, Jr.; Pecora, Jesus D.; Pinheiro, Antonio; Spano, Julio; Barbin, Eduardo; Marchesan, Melissa A.

    2004-05-01

    The knowledge about and control of thermal energy produced by Er:YAG laser after irradiating hard dental tissues and compound resin is important because the pulp, like all vital biological tissue, has a certain capacity for supporting stimulus. The objective of this study was to analyze the thermal variation generated by Er:YAG laser (λ=2.94μm) during the preparation of a Class I cavity in the dental structure and in the removal of microhybrid Z100 (3M) compound resin. An evaluation was made of 30 maxillary human pre-molar teeth from the bank of the Endodontic Laboratory Center of Ribeirao Preto Dental School, Brasil. The sample was divided into 6 groups of 5 teeth each: Group 1, preparation of Class I cavity with Er:YAG laser (350mJ, 3Hz, 343 impulses, 120J, 113 seconds); Group 2, preparation of Class I cavity with Er:YAG laser (350mJ, 4Hz, 343 impulses, 120J, 81 seconds); Group 3, preparation of Class I cavity with Er:YAG laser (350mJ, 6Hz, 343 impulses, 120J, 58 seconds); Group 4, removal of compound resin from Class I preparation with Er:YAG laser (350mJ, 3Hz, 258 impulses, 90J, 85 seconds); Group 5, removal of compound resin from Class I preparation with Er:YAG laser (350mJ, 4Hz, 258 impulses, 90J, 67 seconds); Group 6, removal of compound resin from Class I preparation with Er:YAG laser (350mJ, 6Hz, 258 impulses, 42 seconds). The laser used was KaVo Key 2 (Biberach, Germany), λ=2,94μm, P=3 Watts, pulse duration of 250μs, with air-water cooling. The increase in temperature during dental preparation and the removal of the compound resin was evaluated by means of a Tektronix DMM916 Thermocouple (Consitec, Brasil). The results showed that the application of laser for the removal of the hard dental tissues and for the removal of compound resins with the pulse frequencies 3, 4 and 6 Hz did not generate heating greater than 3.1°C and remained within the histopathological limits permitted for pulp tissue (5.5°C) and there was a significant statistical

  3. Metabolic rates and biochemical compositions of Apostichopus japonicus (Selenka) tissue during periods of inactivity

    Science.gov (United States)

    Bao, Jie; Dong, Shuanglin; Tian, Xiangli; Wang, Fang; Gao, Qinfeng; Dong, Yunwei

    2010-03-01

    Estivation, hibernation, and starvation are indispensable inactive states of sea cucumbers Apostichopus japonicus in nature and in culture ponds. Generally, temperature is the principal factor that induces estivation or hibernation in the sea cucumber. The present study provided insight into the physiological adaptations of A. japonicus during the three types of inactivity (hibernation, estivation, and starvation) by measuring the oxygen consumption rates ( Vo2) and biochemical compositions under laboratory conditions of low (3°C), normal (17°C) and high (24°C) temperature. The results show that the characteristics of A. japonicus in dormancy (hibernation and estivation) states were quite different from higher animals, such as fishes, amphibians, reptiles, and mammals, but more closely resembled a semi-dormant state. It was observed that the shift in the A. japonicus physiological state from normal to dormancy was a chronic rather than acute process, indicated by the gradual depression of metabolic rate. While metabolic rates declined 44.9% for the estivation group and 71.7% for the hibernation group, relative to initial rates, during the 36 d culture period, metabolic rates were not maintained at constant levels during these states. The metabolic depression processes for sea cucumbers in hibernation and estivation appeared to be a passive and an active metabolic suppression, respectively. In contrast, the metabolic rates (128.90±11.70 μg/g h) of estivating sea cucumbers were notably higher (107.85±6.31 μg/g h) than in starving sea cucumbers at 17°C, which indicated that the dormancy mechanism here, as a physiological inhibition, was not as efficient as in higher animals. Finally, the principle metabolic substrate or energy source of sea cucumbers in hibernation was lipid, whereas in estivation they mainly consumed protein in the early times and both protein and lipid thereafter.

  4. Nonionophore antibiotics do not affect the trans-18:1 and conjugated linoleic acid composition in beef adipose tissue.

    Science.gov (United States)

    Aldai, N; Dugan, M E R; Kramer, J K G; Mir, P S; McAllister, T A

    2008-12-01

    The common practice in North American feedlot industries is to add antibiotics to the diet to prevent disease and improve both BW gain and feed efficiency. In this study, 240 crossbred steer calves were backgrounded on a 54% silage diet for 80 d and fed a finishing diet consisting of 81% barley grain, 10% barley silage, and 7.5% supplement (DM basis) with and without in-feed antibiotics for approximately 120 d. Calves were assigned to 1 of 5 treatments: a control with no antibiotics, 11 mg/kg of chlortetracycline, 44 mg/kg of chlortetracycline, 44 mg/kg of chlortetracycline plus 44 mg/kg of sulfamethazine, and 11 mg/ kg of tylosin phosphate. A combination of GLC and silver-ion HPLC methods was used to analyze the fatty acid composition of brisket adipose tissue, with emphasis on trans-18:1 and CLA isomers. The inclusion of nonionophore antibiotics in the diet had little effect on the fatty acid composition, except that feeding either 44 mg/kg of chlortetracycline or 11 mg/kg of tylosin caused small increases in 9c-14:1 and 16:0 relative to the control (0.26 and 0.9 g/100 g of total fatty acids, respectively). Likewise, profiles of trans-18:1 and CLA isomers were unchanged by antibiotics, but across treatments the predominant trans-18:1 isomer was 10t-18:1 (where t = trans; 3.22%) at 3 times the concentration of the second most abundant isomer (11t-18:1; vaccenic acid, 1.05%). Rumenic acid (9c,11t-18:2, where c = cis) was the major CLA isomer at 61% of total CLA, followed by 7t,9c-18:2 at 9%. Because no other effects on fatty acid composition were evident, data for trans-18:1 and CLA were pooled across treatments to investigate possible relationships among rumen PUFA metabolites. The total trans-18:1 content in brisket adipose tissue was positively correlated with 10t-18:1, but not with 11t-18:1, whereas the total CLA was positively correlated with 9c,11t-18:2, but not with 7t,9c-18:2. The 7t,9c-18:2 was, however, positively correlated with 10t-18:1 and 6t/7t/8t-18

  5. Stable carbon isotope composition of perirenal adipose tissue fatty acids from Engadine sheep grazing either mountain or lowland pasture.

    Science.gov (United States)

    Richter, E K; Spangenberg, J E; Willems, H; Kreuzer, M; Leiber, F

    2012-03-01

    To provide further insights into ruminant lipid digestion and metabolism, and into cis-9,trans-11 18:2 synthesis, 12 growing Engadine lambs grazing either mountain pasture (2,250 m above sea level; n = 6) or lowland pasture (400 m above sea level; n = 6) were studied. Both pastures consisted exclusively of C(3) plants. Before the experiment, all animals grazed a common pasture for 6 wk. Grasses and perirenal adipose tissues of the sheep were analyzed for fatty acids by gas chromatography. Stable C-isotope ratios (δ(13)C values in ‰ vs. the Vienna Pee Dee Belemnite standard) were determined in the composite samples by elemental analysis-isotope ratio mass spectrometry. The δ(13)C of the individual fatty acids were measured by gas chromatography-combustion-isotope ratio mass spectrometry. The δ(13)C value of the entire mountain pasture grass was -27.5‰ (SD 0.31), whereas that of the lowland pasture grass was -30.0‰ (SD 0.07). This difference was reflected in the perirenal adipose tissues of the corresponding sheep (P perirenal fat differed between mountain and lowland lambs (P perirenal cis-9,trans-11 18:2 were of endogenous origin and discrimination against (13)C occurred during Δ(9)-desaturation. The same discrimination was indicated by the isotopic shift between 16:0 and cis-9 16:1 in the mountain grazing group. Furthermore, the δ(13)C values of cis-9,trans-11 18:2 were smaller relative to the precursor fatty acids in the mountain lambs compared with the lowland group. This result suggests a reduced extent of biohydrogenation in lambs grazing on mountain grass in comparison with those grazing on lowland grass. This was supported by the smaller cis-9,trans-11 18:2 concentrations in total fatty acids found in the adipose tissues of the lowland lambs (P < 0.001). The results of this study demonstrate that natural differences between δ(13)C values of swards from different pastures and the adipose tissue fatty acids could be used as tracers in studies of

  6. Fabrication and Properties of Silica Gel/Calcium Sulfate/Strontium-doped β-tricalcium Phosphate Composite Porous Scaffolds for Bone Tissue Engineering

    Directory of Open Access Journals (Sweden)

    QIN Xiao-su

    2018-03-01

    Full Text Available The calcium sulfate/strontium-doped β-tricalcium phosphate composite spherical pellets was fabricated, using the calcium sulfate/strontium-doped β-TCP as raw material, and through the stirring spray drying method, and then composite spherical pellets were combined with silica gel, porous silica gel/calcium sulfate/strontium-doped β-tricalcium phosphate scaffold was obtained by stacking aggregation method in the mould. The XRD, SEM and FT-IR, etc are employed to examine the chemical composition, composite morphology and structure characteristics, and the degradability, porosity, mechanical properties and cytotoxicity of the scaffolds materials were studied. The results reveal that the composite porous scaffolds have irregular pore structure with pore size between 0.2-1.0mm, and they have a large number of micropores on each of the composite spherical pellets, with the aperture between 50-200μm. Moreover, the porosity of the composite scaffolds is about 62%, which can meet the requirements of scaffolds for bone tissue engineering in porosity; the cytotoxicity tests show the composite scaffolds have no cytotoxic effect and it has good degradation. Therefore, it has good application prospect in bone tissue engineering of the bone defect repair of non-bearing site.

  7. Saccharide antifreeze compositions

    Energy Technology Data Exchange (ETDEWEB)

    Walters, Kent; Duman, John G; Serianni, Anthony S

    2013-12-10

    The invention provides an antifreeze glycolipid compounds and composition comprising a polysaccharide moiety of Formula I; ##STR00001## wherein D-Manp represents a D-mannopyranose moiety, D-Xylp represents a D-xylopyranose moiety, and n is about 5 to about 70; and one or more lipid moieties covalently linked to the polysaccharide moiety of Formula I or electrostatically associated with the polysaccaride moiety for Formula I. The antifreeze glycolipid compounds and compositions can be used for a variety of industrial, agricultural, medical, and cosmetic applications where recrystallization-inhibition, cyroprotection, or cryopreservation is desired. The antifreeze glycolipid compounds or compositions can be used as, for example, as cryoprotectants for tissue preservation and transplantation, improving the texture of processed frozen food and frozen meats, frostbit protection, crop protection, and green alternatives for land vehicle antifreeze and aircraft de-icing.

  8. The influence of soil composition on the leachability of selected hydrophobic organic compounds (HOCs) from soils using a batch leaching test.

    Science.gov (United States)

    Badea, Silviu-Laurentiu; Lundstedt, Staffan; Liljelind, Per; Tysklind, Mats

    2013-06-15

    The influence of soil composition (peat and clay content) on the leachability was investigated in batch leaching experiments for chemically diverse hydrophobic organic compounds (HOCs: PCP, PAHs, HCB, HCHs, PCBs, and TCDD/Fs). An experimental design was applied to generate 8 diverse soil matrices, and the results were evaluated by orthogonal projections to latent structures (OPLS), as well as compound specific response surface models. Overall, the distribution coefficients (logKd) of model HOCs were in the range of approx. 2.0-5.7. The Kd-values of HCHs, phenanthrene and PCP were positively correlated with the peat content. Kd-values of benzo(a)anthracene, HCB, and PCB 47 were positively correlated with both peat and clay content. The Kd-values of 1,3,6,8-TCDD and 1,3,6,8-TCDF were positively correlated with peat content but negatively correlated with clay content, while for PCB 153 and PCB 155 the correlations were reversed. The correlation between the Kd-values and the compounds' Kow-values was linearly for compounds with log Kow 6, the Kd-values were leveling off, possibly due to small particles in the leachates. Our study demonstrated how complex interaction between both the organic matter and clay components influences the leachability of HOCs in a compound-specific manner. Copyright © 2013 Elsevier B.V. All rights reserved.

  9. Exposure of tumor-bearing mice to extremely high-frequency electromagnetic radiation modifies the composition of fatty acids in thymocytes and tumor tissue.

    Science.gov (United States)

    Gapeyev, Andrew B; Kulagina, Tatiana P; Aripovsky, Alexander V

    2013-08-01

    To test the participation of fatty acids (FA) in antitumor effects of extremely high-frequency electromagnetic radiation (EHF EMR), the changes in the FA composition in the thymus, liver, blood plasma, muscle tissue, and tumor tissue in mice with Ehrlich solid carcinoma exposed to EHF EMR were studied. Normal and tumor-bearing mice were exposed to EHF EMR with effective parameters (42.2 GHz, 0.1 mW/cm2, 20 min daily during five consecutive days beginning the first day after the inoculation of tumor cells). Fatty acid composition of various organs and tissues of mice were determined using a gas chromatography. It was shown that the exposure of normal mice to EHF EMR or tumor growth significantly increased the content of monounsaturated FA (MUFA) and decreased the content of polyunsaturated FA (PUFA) in all tissues examined. Exposure of tumor-bearing mice to EHF EMR led to the recovery of FA composition in thymocytes to the state that is typical for normal animals. In other tissues of tumor-bearing mice, the exposure to EHF EMR did not induce considerable changes that would be significantly distinguished between disturbances caused by EHF EMR exposure or tumor growth separately. In tumor tissue which is characterized by elevated level of MUFA, the exposure to EHF EMR significantly decreased the summary content of MUFA and increased the summary content of PUFA. The recovery of the FA composition in thymocytes and the modification of the FA composition in the tumor under the influence of EHF EMR on tumor-bearing animals may have crucial importance for elucidating the mechanisms of antitumor effects of the electromagnetic radiation.

  10. Effect of e-beam irradiation and microwave heating on the fatty acid composition and volatile compound profile of grass carp surimi

    International Nuclear Information System (INIS)

    Zhang, Hongfei; Wang, Wei; Wang, Haiyan; Ye, Qingfu

    2017-01-01

    In this study, we evaluated the effects of e-beam irradiationпј€1–7 kGyпј‰ and irradiation coupled to microwave heating (e-I-MC, 70 °C internal temperature) on the fatty acid composition and volatile compound profile of grass carp surimi. Compared to control samples, e-beam irradiation generated three novel volatile compounds (heptane, 2,6-dimethyl-nonane, and dimethyl disulfide) and increased the relative proportions of alcohols, aldehydes, and ketones. Meanwhile, e-I-MC significantly increased aldehyde levels and generated five heterocyclic compounds along with these three novel compounds. No significant difference in volatile compounds were detected in e-I-MC samples with increasing irradiation dose (p>0.05), comparing to the control group. E-beam irradiation at 5 and 7 kGy increased the levels of saturated fatty acids (SFAs) and decreased the levels of unsaturated fatty acids (p≤0.05), but did not affect the content of trans fatty acid levels (p>0.05). Irradiation, which had no significant effects on (Eicosapentaenoic acid) EPA, decreased (Docose Hexaenoie Acid) DHA levels. In the e-I-MC group, SFA levels increased and PUFA levels decreased. Additionally, MUFA levels were unaffected and trans fatty acid levels increased slightly following e-I-MC. - Highlights: • E-beam irradiation generated three novel volatile compounds. • E-beam irradiation increased the relative proportions of alcohols, aldehydes, and ketones. • E-beam irradiation coupled to microwave heating increased aldehyde levels and generated five heterocyclic compounds. • E-beam irradiation at 5 and 7 kGy decreased the levels of unsaturated fatty acids, but did not affect trans fatty acid levels.

  11. Breast Tissue Composition and Its Dependence on Demographic Risk Factors for Breast Cancer: Non-Invasive Assessment by Time Domain Diffuse Optical Spectroscopy

    Science.gov (United States)

    Taroni, Paola; Quarto, Giovanna; Pifferi, Antonio; Abbate, Francesca; Balestreri, Nicola; Menna, Simona; Cassano, Enrico; Cubeddu, Rinaldo

    2015-01-01

    Background Breast tissue composition is recognized as a strong and independent risk factor for breast cancer. It is a heritable feature, but is also significantly affected by several other elements (e.g., age, menopause). Nowadays it is quantified by mammographic density, thus requiring the use of ionizing radiation. Optical techniques are absolutely non-invasive and have already proved effective in the investigation of biological tissues, as they are sensitive to tissue composition and structure. Methods Time domain diffuse optical spectroscopy was performed at 7 wavelengths (635-1060 nm) on 200 subjects to derive their breast tissue composition (in terms of water, lipid and collagen content), blood parameters (total hemoglobin content and oxygen saturation level), and information on the microscopic structure (scattering amplitude and power). The dependence of all optically-derived parameters on age, menopausal status, body mass index, and use of oral contraceptives, and the correlation with mammographic density were investigated. Results Younger age, premenopausal status, lower body mass index values, and use of oral contraceptives all correspond to significantly higher water, collagen and total hemoglobin content, and lower lipid content (always p < 0.05 and often p < 10-4), while oxygen saturation level and scattering parameters show significant dependence only on some conditions. Even when age-adjusted groups of subjects are compared, several optically derived parameters (and in particular always collagen and total hemoglobin content) remain significantly different. Conclusions Time domain diffuse optical spectroscopy can probe non-invasively breast tissue composition and physiologic blood parameters, and provide information on tissue structure. The measurement is suitable for in vivo studies and monitoring of changes in breast tissue (e.g., with age, lifestyle, chemotherapy, etc.) and to gain insight into related processes, like the origin of cancer risk

  12. Tissue viscoelasticity is related to tissue composition but may not fully predict the apparent-level viscoelasticity in human trabecular bone – An experimental and finite element study

    DEFF Research Database (Denmark)

    Ojanen, X.; Tanska, P.; Malo, M. K.H.

    2017-01-01

    Trabecular bone is viscoelastic under dynamic loading. However, it is unclear how tissue viscoelasticity controls viscoelasticity at the apparent-level. In this study, viscoelasticity of cylindrical human trabecular bone samples (n = 11, male, age 18–78 years) from 11 proximal femurs were......, utilizing the second order Prony series to depict viscoelasticity. FE simulations showed that tissue-level equilibrium elastic modulus (Eeq) increased with increasing crystallinity (r = 0.730, p =.011) while at the apparent-level it increased with increasing hydroxylysyl pyridinoline content (r = 0.718, p...... or simulated viscoelastic parameters at the tissue- and apparent-levels nor were the parameters related to tissue elasticity determined with SAM. However, only Eeq, g2 and relaxation time τ1 from simulated viscoelastic values were statistically different between tissue- and apparent-levels (p

  13. Alteration of the superconducting properties of A15 compounds and elementary composite superconductors by non-hydrostatic elastic strain

    International Nuclear Information System (INIS)

    Welch, D.O.

    1979-01-01

    Elastic strains alter (usually, but not always, adversely) the critical temperatures, magnetic fields, and current densities of superconducting A15 compounds; non-hydrostatic strain states are particularly effective in this regard. This paper is a review of the experimental evidence, obtained by a variety of techniques, concerning the strain dependence of the critical properties of a number of A15 compounds and a discussion of theoretical models for describing such effects

  14. Composition of the volatile compounds from Aniba canelilla (H. B. K. Mez. extracted by CO2 in the supercritical state

    Directory of Open Access Journals (Sweden)

    Janete H. Y. Vilegas

    Full Text Available The volatile compounds obtained by SFE-CO2 (supercritical fluid extraction utilizing CO2 from the barks of Aniba canelilla (H. B. K. Mez. (Lauraceae were analyzed by HRGC-FID (high resolution gas chromatography - flame ionization detector and HRGC-MS (high resolution gas chromatography -mass spectrometry. Phenylpropanoids and lower amounts of sesquiterpenoids, representing ca. 97% of the total oil, were identified. The main compound, 2-phenylnitroethane, corresponds to 71,12% of the total oil.

  15. Microwave-assisted photocatalysis of neurotoxin compounds using metal oxides quantum dots/nanosheets composites: Photocorrosion inhibition, reusability and antibacterial activity studies.

    Science.gov (United States)

    Fakhri, Ali; Azad, Mona; Fatolahi, Leila; Tahami, Shiva

    2018-01-01

    Water pollution caused by different pollutants is one of the challenging tasks for the scientific community. We have prepared and characterized a material for removal of pollutant compounds. ZnO quantum dots decorated CuO nanosheets and TiO 2 quantum dots decorated WO 3 nanosheets composites have been prepared using a hydrothermal method. The as synthesized catalysts were characterized by various techniques. The crystallite sizes of CuO NSs and WO 3 NSs were to be obtained 12.5 and 13.25nm and when dopped with ZnO and TiO 2 size reduces to 3.2 and 3.9nm, respectively. The energy band gap of the CuO NSs, WO 3 NSs, ZnO QDs/CuO NSs and TiO 2 QDs/WO 3 NSs composite are calculated to be 2.01, 2.61, 1.86 and 2.32eV, respectively. The prepared catalysts are efficiently utilized for the photocatalytic degradation of two neurotoxin compounds under UV and UV coupled with microwave irradiation. The prepared catalyst composites reveal excellent photocatalytic degradation of neurotoxin compound by degrading it up to 75% under UV and UV/microwave irradiation. The photocalysis efficiency in UV/microwave system is higher than UV system. The result shows that the ZnO QDs/CuO NSs and TiO 2 QDs/WO 3 NSs composites have excellent photocorrosion inhibition and reusability properties. Thus, prepared samples with positive surface potential upon interaction with negative surface potential of Enterococcus faecalis and Micrococcus luteus. Copyright © 2017 Elsevier B.V. All rights reserved.

  16. Tissue level material composition and mechanical properties in Brtl/+ mouse model of Osteogenesis Imperfecta after sclerostin antibody treatment

    Science.gov (United States)

    Lloyd, William R.; Sinder, Benjamin P.; Salemi, Joseph; Ominsky, Michael S.; Marini, Joan C.; Caird, Michelle S.; Morris, Michael D.; Kozloff, Kenneth M.

    2015-02-01

    Osteogenesis imperfecta (OI) is a genetic disorder resulting in defective collagen or collagen-associated proteins and fragile, brittle bones. To date, therapies to improve OI bone mass, such as bisphosphonates, have increased bone mass in the axial skeleton of OI patients, but have shown limited effects at reducing long bone fragility. Sclerostin antibody (Scl- Ab), currently in clinical trials for osteoporosis, stimulates bone formation and may have the potential to reduce long bone fracture rates in OI patients. Scl-Ab has been investigated as an anabolic therapy for OI in the Brtl/+ mouse model of moderately severe Type IV OI. While Scl-Ab increases long bone mass in the Brtl/+ mouse, it is not known whether material properties and composition changes also occur. Here, we report on the effects of Scl-Ab on wild type and Brtl/+ young (3 week) and adult (6 month) male mice. Scl-Ab was administered over 5 weeks (25mg/kg, 2x/week). Raman microspectroscopy and nanoindentation are used for bone composition and biomechanical bone property measurements in excised bone. Fluorescent labels (calcein and alizarin) at 4 time points over the entire treatment period are used to enable measurements at specific tissue age. Differences between wild type and Brtl/+ groups included variations in the mineral and matrix lattices, particularly the phosphate v1, carbonate v1, and the v(CC) proline and hydroxyproline stretch vibrations. Results of Raman spectroscopy corresponded to nanoindentation findings which indicated that old bone (near midcortex) is stiffer (higher elastic modulus) than new bone. We compare and contrast mineral to matrix and carbonate to phosphate ratios in young and adult mice with and without treatment.

  17. Composite scaffolds for cartilage tissue engineering based on natural polymers of bacterial origin, thermoplastic poly(3-hydroxybutyrate) and micro-fibrillated bacterial cellulose

    Czech Academy of Sciences Publication Activity Database

    Akaraonye, E.; Filip, J.; Šafaříková, Miroslava; Salih, V.; Keshavarz, T.; Knowles, J.C.; Roy, I.

    2016-01-01

    Roč. 65, č. 7 (2016), s. 780-791 ISSN 0959-8103 Institutional support: RVO:60077344 Keywords : polyhydroxyalkanoates * poly(3-hydroxybutyrate) * bacterial cellulose * micro-fibrillated cellulose * tissue engineering scaffold * composite materials Subject RIV: CD - Macromolecular Chemistry Impact factor: 2.070, year: 2016

  18. Composites

    OpenAIRE

    Zhao, Hanqing; Guo, Yuanzheng

    2014-01-01

    This thesis was a literature study concerning composites. With composites becoming increasingly popular in various areas such as aerospace industry and construction, the research about composites has a significant meaning accordingly. This thesis was aim at introducing some basic information of polymer matrix composites including raw mate-rial, processing, testing, applications and recycling to make a rough understanding of this kind of material for readers. Polymeric matrices, fillers,...

  19. Composition

    DEFF Research Database (Denmark)

    Bergstrøm-Nielsen, Carl

    2011-01-01

    Strategies are open compositions to be realised by improvising musicians. See more about my composition practise in the entry "Composition - General Introduction". Caution: streaming the sound files will in some cases only provide a few minutes' sample. Please DOWNLOAD them to hear them in full...

  20. Composition

    DEFF Research Database (Denmark)

    2014-01-01

    Memory Pieces are open compositions to be realised solo by an improvising musicians. See more about my composition practise in the entry "Composition - General Introduction". Caution: streaming the sound files will in some cases only provide a few minutes' sample. Please DOWNLOAD them to hear them...

  1. Composition

    DEFF Research Database (Denmark)

    Bergstrøm-Nielsen, Carl

    2010-01-01

    New Year is an open composition to be realised by improvising musicians. It is included in "From the Danish Seasons" (see under this title). See more about my composition practise in the entry "Composition - General Introduction". This work is licensed under a Creative Commons "by-nc" License. You...

  2. Biomaterials/scaffolds. Design of bioactive, multiphasic PCL/collagen type I and type II-PCL-TCP/collagen composite scaffolds for functional tissue engineering of osteochondral repair tissue by using electrospinning and FDM techniques.

    Science.gov (United States)

    Schumann, Detlef; Ekaputra, Andrew K; Lam, Christopher X F; Hutmacher, Dietmar W

    2007-01-01

    Current clinical therapies for traumatic or chronic injuries involving osteochondral tissue result in temporary pain reduction and filling of the defect but with biomechanically inferior repair tissue. Tissue engineering of osteochondral repair tissue using autologous cells and bioactive biomaterials has the potential to overcome the current limitations and results in native-like repair tissue with good integration capabilities. For this reason, we applied two modem biomaterial design techniques, namely, electrospinning and fused deposition modeling (FDM), to produce bioactive poly(epsilon-caprolactone)/collagen (PCL/Col) type I and type II-PCL-tri-calcium phosphate (TCP)/Col composites for precursor cell-based osteochondral repair. The application of these two design techniques (electrospinning and FDM) allowed us to specifically produce the a suitable three-dimensional (3D) environment for the cells to grow into a particular tissue (cartilage and bone) in vitro prior to in vivo implantation. We hypothesize that our new designed biomaterials, seeded with autologous bone marrow-derived precursor cells, in combination with bioreactor-stimulated cell-culture techniques can be used to produce clinically relevant osteochondral repair tissue.

  3. The use of the isotopic composition of individual compounds for correlating spilled oils and refined products in the environment with suspected sources

    International Nuclear Information System (INIS)

    Philp, R.P.; Allen, J.; Kuder, T.

    2002-01-01

    Gas chromatography (GC) and gas chromatography/mass spectrometry (CGMS) are two methods generally used to correlate crude oils and refined products found in the environment with their suspected pollution sources. In certain cases, this can be done with bulk carbon isotope compositions, but with crude condensates, or refined products, the lack of biomarkers prohibits the successful use for making unique correlations. Such products can be correlated using an alternative method which makes use of combined gas chromatography-isotope ratio and mass spectrometry (GCIRMS). This method makes it possible to determine the carbon and hydrogen isotopic composition of individual compounds in crude oil, thus producing isotopic fingerprints that could be used in correlation studies. The feasibility of using of GCIRMS to correlate various spilled products in different environments was the main focus of this study. The authors are not proposing that this method will replace GC or GCMS, but are suggesting that it is a powerful tool that could be used in conjunction with the early methods. Carbon and hydrogen isotopic fractionation has been reported for light components such as benzene and toluene. Higher carbon numbered compounds do not seem to undergo major carbon isotopic fractionation as a result of weathering. Hydrogen variations are currently undergoing investigation for compounds with a carbon number greater than C10. Also, isotopic fractionation for refined products has the potential to attenuate naturally. 33 refs., 6 figs

  4. Breast Tissue Composition and Immunophenotype and Its Relationship with Mammographic Density in Women at High Risk of Breast Cancer.

    Directory of Open Access Journals (Sweden)

    Jia-Min B Pang

    Full Text Available To investigate the cellular and immunophenotypic basis of mammographic density in women at high risk of breast cancer.Mammograms and targeted breast biopsies were accrued from 24 women at high risk of breast cancer. Mammographic density was classified into Wolfe categories and ranked by increasing density. The histological composition and immunophenotypic profile were quantified from digitized haematoxylin and eosin-stained and immunohistochemically-stained (ERα, ERβ, PgR, HER2, Ki-67, and CD31 slides and correlated to mammographic density.Increasing mammographic density was significantly correlated with increased fibrous stroma proportion (rs (22 = 0.5226, p = 0.0088 and significantly inversely associated with adipose tissue proportion (rs (22 = -0.5409, p = 0.0064. Contrary to previous reports, stromal expression of ERα was common (19/20 cases, 95%. There was significantly higher stromal PgR expression in mammographically-dense breasts (p=0.026.The proportion of stroma and fat underlies mammographic density in women at high risk of breast cancer. Increased expression of PgR in the stroma of mammographically dense breasts and frequent and unexpected presence of stromal ERα expression raises the possibility that hormone receptor expression in breast stroma may have a role in mediating the effects of exogenous hormonal therapy on mammographic density.

  5. Hydroxyapatite-lignin composite as a metallic implant-bone tissue osseointegration improver: experimental study in dogs

    Directory of Open Access Journals (Sweden)

    Fabrício Luciani Valente

    2015-01-01

    Full Text Available The study aimed to evaluate biocompatibility, osteoconduction and osseointegration of a pasty composite of hydroxyapatite (20% and lignin (80% as a promoter of metal implant and bone tissue integration. An intramedullary Schanz pin was implanted in both tibias of fifteen bitches. In the left tibia, the pin was coated with the biomaterial at the time of surgery. Marrow cavity was also filled with the biomaterial. Right limb did not receive the biomaterial, then constituting the control group. Tibias were harvested from five animals at 8, 60 and 150 days after surgery; three of them were analyzed by histological and biomechanical assessment and the two remaining tibias by X-ray diffraction. Results showed that the biomaterial is biocompatible, with osteoconductivity and osseointegration properties. Histological analysis and diffractograms showed the presence of hydroxyapatite in samples in all periods, although the presence of organic material of low crystallinity was variable. There was no statistical difference in the forces required for removal of the biocompatibility, osteoconductivity and osseointegration, it was not able to promote a better intramedullary pin anchorage.

  6. Phenolic compounds in strawberry (Fragaria x ananassa Duch.) fruits: Composition in 27 cultivars and changes during ripening.

    Science.gov (United States)

    Aaby, Kjersti; Mazur, Sebastian; Nes, Arnfinn; Skrede, Grete

    2012-05-01

    Phenolic compounds in fruits of 27 cultivars of strawberry (Fragaria x ananassa Duch.) grown in Norway were characterised and quantified by HPLC-DAD-MS(n). Total phenolic content, calculated as the sum of the individual compounds, varied 2.3-fold among cultivars, i.e., from 57 to 133mg/100g of fw. There were significant differences among cultivars in concentration of all phenolic compounds. The highest variation between cultivars was found for cinnamoyl glucose (0.6-24.9mg/100g of fw). Concentration of anthocyanins, the most abundant class of phenolic compounds in the majority of the cultivars, varied from 8.5 to 65.9mg/100g of fw. Flavan-3-ols (11-45mg/100g of fw) and ellagitannins (7.7-18.2mg/100g of fw) contributed on average 28% and 14% to total phenolic contents in the strawberry cultivars, respectively. In three cultivars harvested at three stages of ripeness, anthocyanins and cinnamic acid conjugates were the compounds most affected by ripening. The anthocyanin profile for the individual cultivars was only slightly affected by ripening and growing conditions. Copyright © 2011 Elsevier Ltd. All rights reserved.

  7. The role of the canonical biplot method in the study of volatile compounds in cheeses of variable composition

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez Martin, M.I.; Vicente Tavera, S.; Revilla Martin, I.; Vivar Quintana, A.M.; Gonzalez Perez, C.; Hernandez Hierro, J.M.; Lobos Ortega, I.A.

    2016-07-01

    The canonical biplot method (CB) is used to determine the discriminatory power of volatile chemical compounds in cheese. These volatile compounds were used as variables in order to differentiate among 6 groups or populations of cheeses (combinations of two seasons (winter and summer) with 3 types of cheese (cow, sheep and goat’s milk). We analyzed a total of 17 volatile compounds by means of gas chromatography coupled with mass detection. The compounds included aldehydes and methyl-aldehydes, alcohols (primary, secondary and branched chain), ketones, methyl-ketones and esters in winter (WC) and summer (SC) cow’s cheeses, winter (WSh) and summer (SSh) sheep’s cheeses and in winter (WG) and summer (SG) goat’s cheeses. The CB method allows differences to be found as a function of the elaboration of the cheeses, the seasonality of the milk, and the separation of the six groups of cheeses, characterizing the specific volatile chemical compounds responsible for such differences. (Author)

  8. Water-quality assessment of the Albemarle-Pamlico Drainage Basin, North Carolina and Virginia; organochlorine compounds in Asiatic clam (Corbicula fluminea) soft tissues and whole redbrest sunfish (Lepomis auritus) 1992-93

    Science.gov (United States)

    Smith, K.E.; Ruhl, P.M.

    1996-01-01

    The analysis of potential contaminants in biological tissues is an important part of many water-quality assessment programs, including the National Water-Quality Assessment (NAWQA) Program. Tissue analyses often are used to provide information about (1) direct threats to ecosystem integrity, and (2) the occurrence and distribution of potential contaminants in the environment. During 1992-93, Asiatic clam (Corbicula fluminea) soft tissues and whole redbreast sunfish (Lepomis auritus) samples were collected and analyzed to obtain information about the occurrence and distribution of organochlorine compounds in the Albemarle-Pamlico drainage Basin of North Carolina and Virginia. The investigation was conducted as part of the NAWQA Program. Relatively few organochlorine compounds were detected and of the compounds detected, all were detected in relatively low concentrations. The organochlorine compounds detected were p,p'-DDD, p,p'-DDE, p,p'-DDT, dieldrin, trans-nonachlor, PCB's, and toxaphene. Multiple compounds were detected at 16 of 19 sites sampled. Compared to Asiatic clams, redbreast sunfish appear to be better bioindicators of organochlorine contamination in aquatic systems. Except for one detection of toxaphene, pesticide concentrations are well below the National Academy of Sciences and National Academy of Engineering (NAS/NAE) guidelines for the protection of fish-eating wildlife.

  9. Circulating ghrelin and leptin concentrations and growth hormone secretagogue receptor abundance in liver, muscle, and adipose tissue of beef cattle exhibiting differences in composition of gain.

    Science.gov (United States)

    Jennings, J S; Wertz-Lutz, A E; Pritchard, R H; Weaver, A D; Keisler, D H; Bruns, K

    2011-12-01

    Data from species other than cattle indicate that ghrelin and GH secretagogue receptor (GHS-R) could play a key role in fat deposition, energy homeostasis, or glucose metabolism by directly affecting liver and adipose tissue metabolism. Beef steers (n = 72) were used to test the hypothesis that plasma ghrelin and leptin concentrations and abundance of the GHS-R in liver, muscle, and adipose tissues differ in steers exhibiting differences in composition of gain. At trial initiation (d 0), 8 steers were slaughtered for initial carcass composition. The remaining 64 steers were stratified by BW, allotted to pen, and treatment was assigned randomly to pen. Steers were not implanted with anabolic steroids. Treatments were 1) a low-energy (LE) diet fed during the growing period (0 to 111 d) followed by a high-energy (HE) diet during the finishing period (112 to 209 d; LE-HE) or 2) the HE diet for the duration of the trial (1 to 209 d; HE-HE). Eight steers per treatment were slaughtered on d 88, 111, 160, and 209. Carcass ninth, tenth, and eleventh rib sections were dissected for chemical composition and regression equations were developed to predict compositional gain. Liver, muscle, and subcutaneous adipose tissues were frozen in liquid nitrogen for subsequent Western blotting for GHS-R. Replicate blood samples collected before each slaughter were assayed for ghrelin and leptin concentrations. When compared at a common compositional fat end-point, the rate of carcass fat accretion (g·kg of shrunk BW(-1)) was greater (P muscle, and subcutaneous adipose tissue was not different between treatment groups. The role of ghrelin in cattle metabolism warrants further investigation as it could have a significant effect on composition of BW gain, feed efficiency, and metabolic disorders such as ketosis and fatty liver.

  10. A statistical analysis of fibre size and shape distribution after compounding in composites reinforced by natural fibres

    NARCIS (Netherlands)

    Moigne, Le N.; Oever, van den M.J.A.; Budtova, T.

    2011-01-01

    Using high resolution optical microscopy coupled with image analysis software and statistical methods, fibre length and aspect ratio distributions in polypropylene composites were characterized. Three types of fibres, flax, sisal and wheat straw, were studied. Number and surface weighted

  11. COMPOSITIONS BASED ON PALLADIUM(II AND COPPER(II COMPOUNDS, HALIDE IONS, AND BENTONITE FOR OZONE DECOMPOSITION

    Directory of Open Access Journals (Sweden)

    T. L. Rakitskaya

    2017-05-01

    bromide ion. For Cu(II-KBr/N-Bent composition, kinetic and calculation data show that, in the presence of bromide ions, copper(II inhibits the ozone decomposition. For Pd(II-KBr/NBent composition, it has been found that the maximum activity is attained at СPd(II = 1.02·10-5 mol/g. For bimetallic Pd(II- Cu(II-KBr/N-Bent composition, changes in τ0, τ1/2, k1/2, and Q1/2 parameters depending on a Pd(II content are similar to those for monometallic Pd(II-KBr/NBent composition; however, values of the parameters are higher for the monometallic system. Thus, the inhibiting effect of Cu(II is observed even in the presence of palladium(II.

  12. Chemical composition and major odor-active compounds of essential oil from PINELLIA TUBER (dried rhizome of Pinellia ternata) as crude drug.

    Science.gov (United States)

    Iwasa, Megumi; Iwasaki, Toshiki; Ono, Toshirou; Miyazawa, Mitsuo

    2014-01-01

    The chemical composition of the essential oil from PINELLIA TUBER (Japanese name: Hange), the dried rhizome of Pinellia ternata, was investigated by capillary gas chromatography (GC) and GC-mass spectrometry (MS) analyses. The oil obtained from Pinellia tuber was revealed the presence of 114 compounds, representing 90.6% of the total oil identified. This colorless oil had a spicy and woody odor. The main components of the oil were β-cubebene (8.8%), atractylon (7.8%), methyl eugenol (6.2%), and δ-cadinene (5.3%). Fifteen major odor-active compounds were identified in the essential oil from PINELLIA TUBER by the GC-olfactometry (GC-O) and aroma extract dilution analysis (AEDA). Among these, safrole (spicy) and β-vatirenene (woody) showed the highest flavor dilution (FD) factor (128), followed by paeonol (FD = 64; woody, spicy), α-humulene (FD = 64; woody), and β-phenylnaphthalene (FD = 64; spicy).

  13. The isotope method for the determination of stoichiometry between compounds forming the polypyrrole and glucose oxidase composite.

    Science.gov (United States)

    Garbaras, A; Mikoliunaite, L; Popov, A; Ramanaviciene, A; Remeikis, V; Ramanavicius, A

    2015-01-21

    Stable isotope ratio mass spectrometry is a conventional method used in archaeology, and medical, environmental and paleoenvironmental reconstruction studies. However new insights and applicability of the equipment often open new research areas and improve our understanding of the ongoing processes. Therefore the stable isotope ratio mass spectrometry method was applied for the stoichiometry determination of the complex polypyrrole and glucose oxidase composite (PPy-GOx composite). The enzyme glucose oxidase and conducting polymer polypyrrole were reported to form a composite, which was evaluated in time using the dynamic light scattering method. The consistent enlargement of the PPy-GOx composite and the relative decrease of the spare enzyme molecules were observed in the polymerization solution. UV-VIS spectrometry was employed to follow the polymerization process. The isotope mixing model was applied for the evaluation of the constitution of the PPy-GOx composite. According to the obtained results the determination of the PPy-GOx composite stoichiometry could be more reliably determined using the nitrogen isotope ratio approach in comparison to the carbon approach. We expect that this novel work will widen the applications of stable isotope ratio mass spectrometry in research.

  14. Potential of Osteoblastic Cells Derived from Bone Marrow and Adipose Tissue Associated with a Polymer/Ceramic Composite to Repair Bone Tissue.

    Science.gov (United States)

    Freitas, Gileade P; Lopes, Helena B; Almeida, Adriana L G; Abuna, Rodrigo P F; Gimenes, Rossano; Souza, Lucas E B; Covas, Dimas T; Beloti, Marcio M; Rosa, Adalberto L

    2017-09-01

    One of the tissue engineering strategies to promote bone regeneration is the association of cells and biomaterials. In this context, the aim of this study was to evaluate if cell source, either from bone marrow or adipose tissue, affects bone repair induced by osteoblastic cells associated with a membrane of poly(vinylidene-trifluoroethylene)/barium titanate (PVDF-TrFE/BT). Mesenchymal stem cells (MSC) were isolated from rat bone marrow and adipose tissue and characterized by detection of several surface markers. Also, both cell populations were cultured under osteogenic conditions and it was observed that MSC from bone marrow were more osteogenic than MSC from adipose tissue. The bone repair was evaluated in rat calvarial defects implanted with PVDF-TrFE/BT membrane and locally injected with (1) osteoblastic cells differentiated from MSC from bone marrow, (2) osteoblastic cells differentiated from MSC from adipose tissue or (3) phosphate-buffered saline. Luciferase-expressing osteoblastic cells derived from bone marrow and adipose tissue were detected in bone defects after cell injection during 25 days without difference in luciferin signal between cells from both sources. Corroborating the in vitro findings, osteoblastic cells from bone marrow combined with the PVDF-TrFE/BT membrane increased the bone formation, whereas osteoblastic cells from adipose tissue did not enhance the bone repair induced by the membrane itself. Based on these findings, it is possible to conclude that, by combining a membrane with cells in this rat model, cell source matters and that bone marrow could be a more suitable source of cells for therapies to engineer bone.

  15. Ag-loaded MgSrFe-layered double hydroxide/chitosan composite scaffold with enhanced osteogenic and antibacterial property for bone engineering tissue.

    Science.gov (United States)

    Cao, Dandan; Xu, Zhengliang; Chen, Yixuan; Ke, Qinfei; Zhang, Changqing; Guo, Yaping

    2018-02-01

    Bone tissue engineering scaffolds for the reconstruction of large bone defects should simultaneously promote osteogenic differentiation and avoid postoperative infection. Herein, we develop, for the first time, Ag-loaded MgSrFe-layered double hydroxide/chitosan (Ag-MgSrFe/CS) composite scaffold. This scaffold exhibits three-dimensional interconnected macroporous structure with a pore size of 100-300 μm. The layered double hydroxide nanoplates in the Ag-MgSrFe/CS show lateral sizes of 200-400 nm and thicknesses of ∼50 nm, and the Ag nanoparticles with particle sizes of ∼20 nm are uniformly dispersed on the scaffold surfaces. Human bone marrow-derived mesenchymal stem cells (hBMSCs) present good adhesion, spreading, and proliferation on the Ag-MgSrFe/CS composite scaffold, suggesting that the Ag and Sr elements in the composite scaffold have no toxicity to hBMSCs. When compared with MgFe/CS composite scaffold, the Ag-MgSrFe/CS composite scaffold has better osteogenic property. The released Sr 2+ ions from the composite scaffold enhance the alkaline phosphatase activity of hBMSCs, promote the extracellular matrix mineralization, and increase the expression levels of osteogenic-related RUNX2 and BMP-2. Moreover, the Ag-MgSrFe/CS composite scaffold possesses good antibacterial property because the Ag nanoparticles in the composite scaffold effectively prevent biofilm formation against S. aureus. Hence, the Ag-MgSrFe/CS composite scaffold with excellent osteoinductivity and antibacterial property has a great potential for bone tissue engineering. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 863-873, 2018. © 2017 Wiley Periodicals, Inc.

  16. A Comparative Study of Densitometric Parameters of the Bone Tissue Under Transosseous Osteosynthesis by Using Experimental Implants Coated with Superhard Compounds

    Directory of Open Access Journals (Sweden)

    Galimzyan KABIROV

    2015-07-01

    Full Text Available By X-ray computed tomography (CT, density characteristics of the tibiae bones in 25 experimental adult male rats were studied after their tibiae bones have experimentally fractured and then repaired by osteosynthesis using different implants. According to the data that was obtained by computed tomography, it has been defined that bone densities depend on the type of the implant and the chemical composition of the coating which is applied on the surface of the implant. Thus, average values of the density of the tibiae bones in the experimental rats with implants coated with a combination of titanium and hafnium nitrides were not different from the density values of the intact bones. At the same time, the densities of the tibiae in rats with implants made of copper and implants coated with a combination of titanium and zirconium nitrides were 1.5-2 times lower than those of the intact bones. This leads us to conclude that implants coated with titanium and hafnium nitrides are biologically and chemically inert because less pathologic changes in the bone tissue were observed, in contrast to the copper-based implants and those where the coating contains zirconium.

  17. Preparation and Bioactivity Properties of a Novel Composite Membrane of Fructose Mediated β-Tricalcium Pyrophosphate/(Polyethylene Glycol/Chitosan for Guided Tissue Regeneration

    Directory of Open Access Journals (Sweden)

    Jian-Wen Wang

    2015-01-01

    Full Text Available A novel composite membrane of β-tricalcium pyrophosphate (β-TCP and fructose- (F- mediated chitosan/poly(ethylene glycol (CS/PEG was prepared by thermally induced phase separation technique. The prepared composite membranes were characterized using scanning electron microscopy (SEM and X-ray diffraction (XRD. The mechanical property, swelling, degradation, and cytotoxicity of the composite membranes were evaluated in vitro with respect to its potential for use as biodegradable guided tissue regeneration (GTR membrane. In vitro degradation tests showed the composite membrane with a controllable degradation rate when changing the β-TCP content. The incorporation of β-TCP granules also caused a significant enhancement of tensile strength. When β-TCP content is controlled to 50 wt%, homogeneous composite membranes with well mechanical property and enzymatic degradation rate can be obtained. Cytotoxicity assay demonstrates that the composite membranes were nontoxic and had very good cell compatibility. Most importantly, the release of calcium ions and glucosamine from the composite membranes was proved to increase the cell proliferation of NIH3T3. The results of this study have indicated that this novel F-β-TCP/CS/PEG composite can be a suitable material for GTR applications.

  18. Effect of Exogenous Abscisic Acid and Methyl Jasmonate on Anthocyanin Composition, Fatty Acids, and Volatile Compounds of Cabernet Sauvignon (Vitis vinifera L.) Grape Berries.

    Science.gov (United States)

    Ju, Yan-Lun; Liu, Min; Zhao, Hui; Meng, Jiang-Fei; Fang, Yu-Lin

    2016-10-12

    The anthocyanin composition, fatty acids, and volatile aromas are important for Cabernet Sauvignon grape quality. This study evaluated the effect of exogenous abscisic acid (ABA) and methyl jasmonate (MeJA) on the anthocyanin composition, fatty acids, lipoxygenase activity, and the volatile compounds of Cabernet Sauvignon grape berries. Exogenous ABA and MeJA improved the content of total anthocyanins (TAC) and individual anthocyanins. Lipoxygenase (LOX) activity also increased after treatment. Furthermore, 16 fatty acids were detected. The linoleic acid concentration gradually increased with ABA concentration. The fatty acid content decreased with increasing MeJA concentration and then increased again, with the exception of linoleic acid. After exogenous ABA and MeJA treatment, the C6 aroma content increased significantly. Interestingly, the exogenous ABA and MeJA treatments improved mainly the content of 1-hexanol, hexanal, and 2-heptanol. These results provide insight into the effect of plant hormones on wine grapes, which is useful for grape quality improvement.

  19. Composite cell sheet for periodontal regeneration: crosstalk between different types of MSCs in cell sheet facilitates complex periodontal-like tissue regeneration.

    Science.gov (United States)

    Zhang, Hao; Liu, Shiyu; Zhu, Bin; Xu, Qiu; Ding, Yin; Jin, Yan

    2016-11-14

    Tissue-engineering strategies based on mesenchymal stem cells (MSCs) and cell sheets have been widely used for periodontal tissue regeneration. However, given the complexity in periodontal structure, the regeneration methods using a single species of MSC could not fulfill the requirement for periodontal regeneration. We researched the interaction between the periodontal ligament stem cells (PDLSCs) and jaw bone marrow-derived mesenchymal stem cells (JBMMSCs), and constructed a composite cell sheet comprising both of the above MSCs to regenerate complex periodontium-like structures in nude mice. Our results show that by co-culturing PDLSCs and JBMMSCs, the expressions of bone and extracellular matrix (ECM)-related genes and proteins were significantly improved in both MSCs. Further investigations showed that, compared to the cell sheet using PDLSCs or JBMMSCs, the composite stem cell sheet (CSCS), which comprises these two MSCs, expressed higher levels of bone- and ECM-related genes and proteins, and generated a composite structure more similar to the native periodontal tissue physiologically in vivo. In conclusion, our results demonstrate that the crosstalk between PDLSCs and JBMMSCs in cell sheets facilitate regeneration of complex periodontium-like structures, providing a promising new strategy for physiological and functional regeneration of periodontal tissue.

  20. Optimized composition of nanocomposite scaffolds formed from silk fibroin and nano-TiO2for bone tissue engineering.

    Science.gov (United States)

    Johari, N; Madaah Hosseini, H R; Samadikuchaksaraei, A

    2017-10-01

    Natural silk fibroin (SF) polymer has biomedical and mechanical properties as a biomaterial for bone tissue engineering scaffolds. Freeze-dried porous nanocomposite scaffolds were prepared from silk fibroin and titanium dioxide (TiO 2 ) nanoparticles as a bioactive reinforcing agent by a phase separation method. In order to fabricate SF/TiO 2 scaffolds, 5, 10, 15 and 20wt% of the TiO 2 were added to the SF. The phase structure, functional groups and morphology of the scaffolds were evaluated using X-ray diffraction, Fourier transform infrared spectroscopy and scanning electron microscopy techniques, respectively. Porosity of the scaffolds was measured by Archimedes' Principle. In addition, mechanical properties of prepared scaffolds were evaluated by measuring the compressive strength and compressive modulus. The bioactivity property of these scaffolds was examined for 7, 14, 21 and 28days immersion in simulated body fluid (SBF) at 37°C and the in vitro degradation was studied by incubation in phosphate buffered saline (PBS) at 37°C and pH7.4 for up to 30days. Moreover, the scaffolds' biocompatibility was evaluated by seeding and culture of SaOS-2 osteoblast-like cells and assessment of their proliferation with MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] assay. Results showed that the prepared scaffolds had directional porosity and the reduction of porosity in composite scaffolds with higher contents of TiO 2 nanoparticles resulted to an improvement of the mechanical strength. The macroporous structures with open interconnected and directional pores were successfully obtained without applying any porogen or inorganic solvent. The bioactivity of these scaffolds was confirmed by scanning electron microscopy (SEM) showing surface crystallization of the apatite layer proportional to the duration of immersion in the SBF and the degradation rate of scaffolds were increased by increasing the TiO 2 content. The osteoblast-like cells showed a high

  1. PHBV/PLLA-based composite scaffolds fabricated using an emulsion freezing/freeze-drying technique for bone tissue engineering: surface modification and in vitro biological evaluation

    International Nuclear Information System (INIS)

    Sultana, Naznin; Wang Min

    2012-01-01

    Tissue engineering combines living cells with biodegradable materials and/or bioactive components. Composite scaffolds containing biodegradable polymers and nanosized osteoconductive bioceramic with suitable properties are promising for bone tissue regeneration. In this paper, based on blending two biodegradable and biocompatible polymers, namely poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) and poly(l-lactic acid) (PLLA) with incorporated nano hydroxyapatite (HA), three-dimensional composite scaffolds with controlled microstructures and an interconnected porous structure, together with high porosity, were fabricated using an emulsion freezing/freeze-drying technique. The influence of various parameters involved in the emulsion freezing/freeze-drying technique was studied for the fabrication of good-quality polymer scaffolds based on PHBV polymers. The morphology, mechanical properties and crystallinity of PHBV/PLLA and HA in PHBV/PLLA composite scaffolds and PHBV polymer scaffolds were studied. The scaffolds were coated with collagen in order to improve wettability. During in vitro biological evaluation study, it was observed that SaOS-2 cells had high attachment on collagen-coated scaffolds. Significant improvement in cell proliferation and alkaline phosphatase activity for HA-incorporated composite scaffolds was observed due to the incorporation of HA. After 3 and 7 days of culture on all scaffolds, SaOS-2 cells also had normal morphology and growth. These results indicated that PHBV/PLLA-based scaffolds fabricated via an emulsion freezing/freeze-drying technique were favorable sites for osteoblastic cells and are promising for the applications of bone tissue engineering.

  2. Sugar Composition and Molecular Weight Distribution of Cell Wall Polysaccharides in Outer and Inner Tissues from Segments of Dark Grown Squash (Cucurbita maxima Duch.) Hypocotyls.

    Science.gov (United States)

    Wakabayashi, K; Sakurai, N; Kuraishi, S

    1990-07-01

    The elongation growth of stem segments is determined by the outer cell layers (epidermis and collenchyma). We measured the sugar composition and molecular weight distribution of pectin and hemicellulose fractions obtained from inner and outer tissues of squash (Cucurbita maxima Duch.) hypocotyls. In addition, we studied the changes in these parameters after a 9 hour period of incubation of the segments. The results show that outer tissues have higher molecular weight pectin and hemicellulose compared to inner tissues (2-3 times higher). Incubation results in a 13 to 25% decrease in the amount of pectin and hemicellulose in inner tissues and an increase of 11 to 32% in the outer tissues. This increase in the outer tissues is accompanied by a decrease in the molecular weight of some of the components. These results clearly show that cell wall metabolism during elongation growth differs markedly in inner and outer tissues, and that future studies on the effect of auxin need to take these differences into account.

  3. Sugar Composition and Molecular Weight Distribution of Cell Wall Polysaccharides in Outer and Inner Tissues from Segments of Dark Grown Squash (Cucurbita maxima Duch.) Hypocotyls 1

    Science.gov (United States)

    Wakabayashi, Kazuyuki; Sakurai, Naoki; Kuraishi, Susumu

    1990-01-01

    The elongation growth of stem segments is determined by the outer cell layers (epidermis and collenchyma). We measured the sugar composition and molecular weight distribution of pectin and hemicellulose fractions obtained from inner and outer tissues of squash (Cucurbita maxima Duch.) hypocotyls. In addition, we studied the changes in these parameters after a 9 hour period of incubation of the segments. The results show that outer tissues have higher molecular weight pectin and hemicellulose compared to inner tissues (2-3 times higher). Incubation results in a 13 to 25% decrease in the amount of pectin and hemicellulose in inner tissues and an increase of 11 to 32% in the outer tissues. This increase in the outer tissues is accompanied by a decrease in the molecular weight of some of the components. These results clearly show that cell wall metabolism during elongation growth differs markedly in inner and outer tissues, and that future studies on the effect of auxin need to take these differences into account. PMID:16667612

  4. Mineral composition, nutritional properties, total phenolics and flavonoids compounds of the atemoya fruit (Annona squamosa L. x Annona cherimola Mill.) and evaluation using multivariate analysis techniques.

    Science.gov (United States)

    Santos, Walter N L Dos; Sauthier, Maria Celeste S; Cavalcante, Dannuza D; Benevides, Clícia M J; Dias, Fábio S; Santos, Daniele C M B

    2016-09-01

    The atemoya is a hybrid fruit obtained by crossing of cherimoya (Annona cherimola Mill.) with sweet sop (Annona squamosa L.). The information about chemical composition of atemoya is scarce. The mineral composition was evaluated employing Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES) and the centesimal composition and the physico-chemical parameters were assessed employing procedures described in the AOAC methods. The total phenolic compounds (TPC) and total flavonoids (TF) were determined using spectroanalytical methods. Considering the Reference Daily Intake (RDI), the concentrations of K, Cu and Vitamin C found in atemoya were the highest, representing about 32, 23 and 37% of the RDI, respectively. The total carbohydrates were 32 g 100g-1 and the soluble solids was equivalent to (32.50 ± 0.03) °Brix. The result for TPC was 540.47 ± 2.32 mgGAE 100 g-1 and the TF was 11.56 ± 1.36 mgQE 100 g-1. The exploratory evaluation of 42 atemoya samples was performed through Principal Component Analysis (PCA), which discriminated green and ripe fruits according to their mineral composition. The elements that contributed most for the variability between green and ripe fruits were: Ba, Ca, Cu, K, Mg and P.

  5. Mineral composition, nutritional properties, total phenolics and flavonoids compounds of the atemoya fruit (Annona squamosa L. x Annona cherimola Mill. and evaluation using multivariate analysis techniques

    Directory of Open Access Journals (Sweden)

    WALTER N.L. DOS SANTOS

    2016-01-01

    Full Text Available ABSTRACT The atemoya is a hybrid fruit obtained by crossing of cherimoya (Annona cherimola Mill. with sweet sop (Annona squamosa L.. The information about chemical composition of atemoya is scarce. The mineral composition was evaluated employing Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES and the centesimal composition and the physico-chemical parameters were assessed employing procedures described in the AOAC methods. The total phenolic compounds (TPC and total flavonoids (TF were determined using spectroanalytical methods. Considering the Reference Daily Intake (RDI, the concentrations of K, Cu and Vitamin C found in atemoya were the highest, representing about 32, 23 and 37% of the RDI, respectively. The total carbohydrates were 32 g 100g-1 and the soluble solids was equivalent to (32.50 ± 0.03 °Brix. The result for TPC was 540.47 ± 2.32 mgGAE 100 g-1 and the TF was 11.56 ± 1.36 mgQE 100 g-1. The exploratory evaluation of 42 atemoya samples was performed through Principal Component Analysis (PCA, which discriminated green and ripe fruits according to their mineral composition. The elements that contributed most for the variability between green and ripe fruits were: Ba, Ca, Cu, K, Mg and P.

  6. The composition of engineered cartilage at the time of implantation determines the likelihood of regenerating tissue with a normal collagen architecture.

    Science.gov (United States)

    Nagel, Thomas; Kelly, Daniel J

    2013-04-01

    The biomechanical functionality of articular cartilage is derived from both its biochemical composition and the architecture of the collagen network. Failure to replicate this normal Benninghoff architecture in regenerating articular cartilage may in turn predispose the tissue to failure. In this article, the influence of the maturity (or functionality) of a tissue-engineered construct at the time of implantation into a tibial chondral defect on the likelihood of recapitulating a normal Benninghoff architecture was investigated using a computational model featuring a collagen remodeling algorithm. Such a normal tissue architecture was predicted to form in the intact tibial plateau due to the interplay between the depth-dependent extracellular matrix properties, foremost swelling pressures, and external mechanical loading. In the presence of even small empty defects in the articular surface, the collagen architecture in the surrounding cartilage was predicted to deviate significantly from the native state, indicating a possible predisposition for osteoarthritic changes. These negative alterations were alleviated by the implantation of tissue-engineered cartilage, where a mature implant was predicted to result in the formation of a more native-like collagen architecture than immature implants. The results of this study highlight the importance of cartilage graft functionality to maintain and/or re-establish joint function and suggest that engineering a tissue with a native depth-dependent composition may facilitate the establishment of a normal Benninghoff collagen architecture after implantation into load-bearing defects.

  7. Effect of processing on physicochemical composition, bioactive compounds and enzymatic activity of yellow mombin (Spondias mombin L.) tropical juice

    OpenAIRE

    de Carvalho, Joelia Marques; Maia, Geraldo Arraes; da Fonseca, Ana Valquíria V.; de Sousa, Paulo Henrique M.; Rodrigues, Sueli

    2013-01-01

    Yellow mombin (Spondias mombin, L.) is a tropical fruit that presents exotic taste and aroma, being source of carotenoids and phenolics compounds. It presents a good potential for processing, despite some restriction related with the presence of high amounts of peroxidase (POD) and pectinmethylesterase (PME) which can cause sensory changes in the product. This work addresses the evaluation of changes in POD and PME enzyme activity during the traditional industrial processing used to produce t...

  8. Influence of Harvest Season and Cultivar on the Variation of Phenolic Compounds Composition and Antioxidant Properties in Vaccinium ashei Leaves

    Directory of Open Access Journals (Sweden)

    Verciane Schneider Cezarotto

    2017-09-01

    Full Text Available The effect of variation of harvest season and cultivar on the total phenolic content (TPC, total flavonoid content (TFC, HPLC-UV/DAD profile and antioxidant properties in Vaccinium ashei (Rabbiteye blueberry leaves grown in Brazil was evaluated. The cultivars collected in December and March were Aliceblue, Powderblue, Climax, Bluegem and FloridaM. It was observed that leaves from March had the highest TPC values (222 ± 1 mg gallic acid equivalents/g to Aliceblue cultivar and highest TFC values (49.8 ± 0.8 and 48.7 ± 0.7 µg rutin/g to Clímax and Powderblue cultivars, respectively. The chromatographic profile was quantitatively similar, however, the proportions of each compound were influenced by cultivar and harvest season. Chlorogenic acid and rutin were the main identified phenolic compounds, but chlorogenic acid was the most abundant in both harvest seasons. Antioxidant capacities values ranged from 5.80 ± 0.04 to 105 ± 2 µg/mL (DPPH and 178 ± 5 to 431 ± 8 mmol Trolox/100 g (ORAC. The cultivar Bluegem by March had the highest values in both assays. The results indicate that the blueberry leaves from different cultivars and harvest seasons have different phenolic compounds content and different antioxidant capacities. In addition, the antioxidant properties demonstrated a high correlation with rutin content.

  9. Influence of fiber type and coating on the composite properties of EPDM compounds reinforced with short aramid fibers

    NARCIS (Netherlands)

    Hintze, C.; Sadatshirazi, S.; Wiessner, S.; Talma, Auke; Heinrich, G.; Noordermeer, Jacobus W.M.

    2013-01-01

    There is a renewed interest in the application of short aramid fibers in elastomers because of the considerable improvement in mechanical and dynamic properties of the corresponding rubber composites. Possible applications of short aramid fiber–reinforced elastomers are tires, dynamically loaded

  10. The role of the canonical biplot method in the study of volatile compounds in cheeses of variable composition

    Directory of Open Access Journals (Sweden)

    González-Martín, M. I.

    2016-03-01

    Full Text Available The canonical biplot method (CB is used to determine the discriminatory power of volatile chemical compounds in cheese. These volatile compounds were used as variables in order to differentiate among 6 groups or populations of cheeses (combinations of two seasons (winter and summer with 3 types of cheese (cow, sheep and goat’s milk. We analyzed a total of 17 volatile compounds by means of gas chromatography coupled with mass detection. The compounds included aldehydes and methyl-aldehydes, alcohols (primary, secondary and branched chain, ketones, methyl-ketones and esters in winter (WC and summer (SC cow’s cheeses, winter (WSh and summer (SSh sheep’s cheeses and in winter (WG and summer (SG goat’s cheeses. The CB method allows differences to be found as a function of the elaboration of the cheeses, the seasonality of the milk, and the separation of the six groups of cheeses, characterizing the specific volatile chemical compounds responsible for such differences.El m.todo biplot can.nico (CB se utiliza para determinar el poder discriminatorio de compuestos qu.micos vol.tiles en queso. Los compuestos vol.tiles se utilizan como variables con el fin de diferenciar entre los 6 grupos o poblaciones de quesos (combinaciones de dos temporadas (invierno y verano con 3 tipos de queso (vaca, oveja y cabra. Se analizan un total de 17 compuestos vol.tiles por medio de cromatograf.a de gases acoplada con detecci.n de masas. Los compuestos incluyen aldeh.dos y metil-aldeh.dos, alcoholes (primarios de cadena, secundaria y ramificada, cetonas, metil-cetonas y .steres. Los seis grupos de quesos son, quesos de vaca de invierno (WC y verano (SC; quesos de oveja de invierno (WSh y verano (SSh y quesos de cabra de invierno (WG y verano (SG. El m.todo CB permite la separaci.n de los seis grupos de quesos y encontrar las diferencias en funci.n del tipo y estacionalidad de la leche, caracterizando los compuestos qu.micos vol.tiles espec.ficos responsables de

  11. Study of chemical composition and volatile compounds along with in-vitro assay of antioxidant activity of two medicinal rice varieties: Karungkuravai and Mappilai samba.

    Science.gov (United States)

    Krishnanunni, K; Senthilvel, P; Ramaiah, Sudha; Anbarasu, Anand

    2015-05-01

    The objective of this study is to analyze the chemical composition and volatiles present in two medicinal rice varieties of "karungkuravai" and "mappilai samba" and to investigate their total phenolic content and bio activity. Chemical composition of the rice varieties was analyzed using gas chromatography/mass spectroscopy (GC-MS), the volatile compounds are identified using static head space analysis (SHS) followed by GC-MS. Total phenolic content (TPC) is estimated using Folin Ciocalteu colorimetric method, antioxidant assay is done using 1, 1-diphenyl-2-picrylhydrazyl (DPPH) assay and ferric reducing antioxidant power (FRAP) assay. GC-MS and SHS analysis identified pharmaceutically important phytochemicals present in the rice variety. The compounds like "curlone" and "7-chloro-1,3-dihydro-5-phenyl-1-(trimethylsilyl)- 2H-1-4-benzodiazapene-2-one" are identified for the first time in any rice variety. Phenols are found to be present in both rice varieties. Both rice varieties also showed antioxidant activity in both DPPH and FRAP assays and the IC50 values were 91.08 μg/ml and 359.93 μg/ml for "karungkuravai" and "mappilai samba", respectively. . The correlation coefficient and regression analysis of total phenolic content with DPPH assay and FRAP assay show significant positive correlation coefficient values and coefficient of regression values.

  12. The role of phytoplankton composition, biomass and cell volume in accumulation and transfer of endocrine disrupting compounds in the Southern Baltic Sea (The Gulf of Gdansk).

    Science.gov (United States)

    Staniszewska, Marta; Nehring, Iga; Zgrundo, Aleksandra

    2015-12-01

    Endocrine disrupting compounds (EDCs) like bisphenol A (BPA), 4-tert-octylphenol (OP) and 4-nonylphenol (NP) are introduced to the trophic webs through among others phytoplankton. This paper describes BPA, OP and NP concentrations in phytoplankton in the Gulf of Gdansk (Southern Baltic Sea) in the years 2011-2012. The assays of BPA, OP and NP in samples were performed using HPLC with fluorescence detection. The concentrations of BPA, the most commonly used of the three compounds, were over ten times higher than OP and NP concentrations. The concentrations of the studied EDCs in phytoplankton from the Gulf of Gdansk depended on anthropogenic factors and on phytoplankton properties (species composition, biomass, volume). An increase in phytoplankton biomass did not always result in an increase of BPA, OP and NP concentrations. However, the load of the studied EDCs accumulated in phytoplankton biomass increase with a rise of biomass. An increase in BPA, OP and NP concentrations was effected by biomass growth and the proportions ofciliates, dinoflagellates, diatoms and green algae. A strong positive correlation between OP and NP concentrations and negative correlation between BPA concentrations and biomass of organisms with cells measuring <1000 μm(3) in volume results from the differing properties of these compounds. Copyright © 2015 Elsevier Ltd. All rights reserved.

  13. Composition

    DEFF Research Database (Denmark)

    Bergstrøm-Nielsen, Carl

    2014-01-01

    Cue Rondo is an open composition to be realised by improvising musicians. See more about my composition practise in the entry "Composition - General Introduction". Caution: streaming the sound/video files will in some cases only provide a few minutes' sample, or the visuals will not appear at all....... Please DOWNLOAD them to see/hear them in full length! This work is licensed under a Creative Commons "by-nc" License. You may for non-commercial purposes use and distribute it, performance instructions as well as specially designated recordings, as long as the author is mentioned. Please see http...

  14. Vertical distributions of bound saturated fatty acids and compound-specific stable carbon isotope compositions in sediments of two lakes in China: implication for the influence of eutrophication.

    Science.gov (United States)

    Wang, Lifang; Xiong, Yongqiang; Wu, Fengchang; Li, Qiuhua; Lin, Tian; Giesy, John P

    2014-11-01

    Lakes Dianchi (DC) and Bosten (BST) were determined to be at different stages of eutrophication, by use of total organic carbon content, bulk carbon isotopic composition, bulk nitrogen isotopic composition, and bound saturated fatty acid (BSFA) concentrations in sediment cores. A rapid increase in the supply of organic matter (OM) to DC began after the 1950s, while the environment and trophic status of BST remained constant as indicated by characteristics of OM input to sediments. The BSFA ratios of nC14 + nC16 + nC18/nC24 + nC26 + nC28 increase upward from 7 to 13 in the DC core, which are significantly greater than those from BST (2 to 3). This result is consistent with algae or bacteria being the dominant contribution of the OM increase induced by eutrophication in DC. The positive shift of nC16 compound-specific δ (13)C in the upper section might be an indicator of excess algal productivity, which was observed in the two lakes. The positive shifts of compound-specific δ (13)C of other BSFAs were also observed in the upper section of the core only from DC. The observed trends of compound-specific δ(13)C of BSFA originated from different sources became more consistent, which reflected the intensified eutrophication had profoundly affected production and preservation of OM in DC. The results observed for BST indicated that accumulation of algae did not affect the entire aquatic ecosystem until now.

  15. Characterization of microbial and chemical composition of shuttle wet waste with permanent gas and volatile organic compound analyses

    Science.gov (United States)

    Peterson, B. V.; Hummerick, M.; Roberts, M. S.; Krumins, V.; Kish, A. L.; Garland, J. L.; Maxwell, S.; Mills, A.

    2004-01-01

    Solid-waste treatment in space for Advanced Life Support, ALS, applications requires that the material can be safely processed and stored in a confined environment. Many solid-wastes are not stable because they are wet (40-90% moisture) and contain levels of soluble organic compounds that can contribute to the growth of undesirable microorganisms with concomitant production of noxious odors. In the absence of integrated Advanced Life Support systems on orbit, permanent gas, trace volatile organic and microbiological analyses were performed on crew refuse returned from the volume F "wet" trash of three consecutive Shuttle missions (STS-105, 109, and 110). These analyses were designed to characterize the short-term biological stability of the material and assess potential crew risks resulting from microbial decay processes during storage. Waste samples were collected post-orbiter landing and sorted into packaging material, food waste, toilet waste, and bulk liquid fractions deposited during flight in the volume F container. Aerobic and anaerobic microbial loads were determined in each fraction by cultivation on R2A and by acridine orange direct count (AODC). Dry and ash weights were performed to determine both water and organic content of the materials. Experiments to determine the aerobic and anaerobic biostability of refuse stored for varying periods of time were performed by on-line monitoring of CO2 and laboratory analysis for production of hydrogen sulfide and methane. Volatile organic compounds and permanent gases were analyzed using EPA Method TO15 by USEPA et al. [EPA Method TO15, The Determination of Volatile Organic Compounds (VOCs) in Ambient Air using SUMMA, Passivated Canister Sampling and Gas Chromatographic Analysis,1999] with gas chromatography/mass spectrometry and by gas chromatography with selective detectors. These baseline measures of waste stream content, labile organics, and microbial load in the volume F Shuttle trash provide data for waste

  16. Characterization of microbial and chemical composition of shuttle wet waste with permanent gas and volatile organic compound analyses

    Science.gov (United States)

    Peterson, B. V.; Hummerick, M.; Roberts, M. S.; Krumins, V.; Kish, A. L.; Garland, J. L.; Maxwell, S.; Mills, A.

    2004-01-01

    Solid-waste treatment in space for Advanced Life Support, ALS, applications requires that the material can be safely processed and stored in a confined environment. Many solid-wastes are not stable because they are wet (40-90% moisture) and contain levels of soluble organic compounds that can contribute to the growth of undesirable microorganisms with concomitant production of noxious odors. In the absence of integrated Advanced Life Support systems on orbit, permanent gas, trace volatile organic and microbiological analyses were performed on crew refuse returned from the volume F "wet" trash of three consecutive Shuttle missions (STS-105, 109, and 110). These analyses were designed to characterize the short-term biological stability of the material and assess potential crew risks resulting from microbial decay processes during storage. Waste samples were collected post-orbiter landing and sorted into packaging material, food waste, toilet waste, and bulk liquid fractions deposited during flight in the volume F container. Aerobic and anaerobic microbial loads were determined in each fraction by cultivation on R2A and by acridine orange direct count (AODC). Dry and ash weights were performed to determine both water and organic content of the materials. Experiments to determine the aerobic and anaerobic biostability of refuse stored for varying periods of time were performed by on-line monitoring of CO 2 and laboratory analysis for production of hydrogen sulfide and methane. Volatile organic compounds and permanent gases were analyzed using EPA Method TO15 by USEPA et al. [EPA Method TO15, The Determination of Volatile Organic Compounds (VOCs) in Ambient Air using SUMMA, Passivated Canister Sampling and Gas Chromatographic Analysis, 1999] with gas chromatography/mass spectrometry and by gas chromatography with selective detectors. These baseline measures of waste stream content, labile organics, and microbial load in the volume F Shuttle trash provide data for waste

  17. ePlantLIBRA: A composition and biological activity database for bioactive compounds in plant food supplements.

    Science.gov (United States)

    Plumb, J; Lyons, J; Nørby, K; Thomas, M; Nørby, E; Poms, R; Bucchini, L; Restani, P; Kiely, M; Finglas, P

    2016-02-15

    The newly developed ePlantLIBRA database is a comprehensive and searchable database, with up-to-date coherent and validated scientific information on plant food supplement (PFS) bioactive compounds, with putative health benefits as well as adverse effects, and contaminants and residues. It is the only web-based database available compiling peer reviewed publications and case studies on PFS. A user-friendly, efficient and flexible interface has been developed for searching, extracting, and exporting the data, including links to the original references. Data from over 570 publications have been quality evaluated and entered covering 70 PFS or their botanical ingredients. Copyright © 2015 Elsevier Ltd. All rights reserved.

  18. Investigating the Variation of Volatile Compound Composition in Maotai-Flavoured Liquor During Its Multiple Fermentation Steps Using Statistical Methods

    Directory of Open Access Journals (Sweden)

    Zheng-Yun Wu

    2016-01-01

    Full Text Available The use of multiple fermentations is one of the most specific characteristics of Maotai-flavoured liquor production. In this research, the variation of volatile composition of Maotai-flavoured liquor during its multiple fermentations is investigated using statistical approaches. Cluster analysis shows that the obtained samples are grouped mainly according to the fermentation steps rather than the distillery they originate from, and the samples from the first two fermentation steps show the greatest difference, suggesting that multiple fermentation and distillation steps result in the end in similar volatile composition of the liquor. Back-propagation neural network (BNN models were developed that satisfactorily predict the number of fermentation steps and the organoleptic evaluation scores of liquor samples from their volatile compositions. Mean impact value (MIV analysis shows that ethyl lactate, furfural and some high-boiling-point acids play important roles, while pyrazine contributes much less to the improvement of the flavour and taste of Maotai-flavoured liquor during its production. This study contributes to further understanding of the mechanisms of Maotai-flavoured liquor production.

  19. Experimental study on the penetration effect of ceramics composite projectile on ceramic / A3 steel compound targets

    Directory of Open Access Journals (Sweden)

    Di-qi Hu

    2017-08-01

    Full Text Available In order to improve the penetration of projectiles into ceramic composite armors, the nose of 30 mm standard projectile was replaced by a toughened ceramic nose, and the performance of ceramic-nose projectiles penetrating into ceramic/A3 steel composite targets has been experimentally researched. According to impact dynamics theory,, the performances of 30 mm ceramic-nose projectile and 30 mm standard projectile penetrating into the ceramic/A3 steel composite targets were analyzed and compared using DOP method, especially focusing on the effects made by different nose structures and materials. The aperture and depth of perforation of projectile into the armor plates as well as the residual mass of bullet core under the same conditions were comparatively analyzed. A numerical simulation was built and computed by ANSYS/LS-DYNA. Based on the simulated results, the penetration performance was further analyzed in terms of the residual mass of bullet core. The results show that the ceramic nose has a great effect on the protection of bullet core.

  20. Effect of processing on physicochemical composition, bioactive compounds and enzymatic activity of yellow mombin (Spondias mombin L.) tropical juice.

    Science.gov (United States)

    de Carvalho, Joelia Marques; Maia, Geraldo Arraes; da Fonseca, Ana Valquíria V; de Sousa, Paulo Henrique M; Rodrigues, Sueli

    2015-02-01

    Yellow mombin (Spondias mombin, L.) is a tropical fruit that presents exotic taste and aroma, being source of carotenoids and phenolics compounds. It presents a good potential for processing, despite some restriction related with the presence of high amounts of peroxidase (POD) and pectinmethylesterase (PME) which can cause sensory changes in the product. This work addresses the evaluation of changes in POD and PME enzyme activity during the traditional industrial processing used to produce tropical juices in Brazil. The enzyme activity was determined after the main steps of the processing: fruit pulping, homogenization and pasteurization. Although both enzymes presented significant activity loss during processing, the final product showed residual activity for PME (25 %) and POD (2.5 %). PME showed to be more thermal resistant than POD in yellow mombin juice. Considering the compounds with antioxidant activity, yellow mombin presented high amounts of carotenoids and phenolics when compared to other tropical fruits such as passion fruit and pineapple. Although the processing of the fruit resulted in significative phenolic loss, the carotenoids content was not affected significantly by the processing.

  1. Compositions, Formation Mechanism, and Neuroprotective Effect of Compound Precipitation from the Traditional Chinese Prescription Huang-Lian-Jie-Du-Tang

    Directory of Open Access Journals (Sweden)

    Chenze Zhang

    2016-08-01

    Full Text Available Compounds in the form of precipitation (CFP are universally formed during the decocting of Chinese prescriptions, such as Huang-Lian-Jie-Du-Tang (HLJDT. The formation rate of HLJDT CFP even reached 2.63% ± 0.20%. The identification by liquid chromatography mass spectrometry (LC-MSn proved that the main chemical substances of HLJDT CFP are baicalin and berberine, which is coincident with the theory that the CFP might derive from interaction between acidic and basic compounds. To investigate the formation mechanism of HLJDT CFP, baicalin and berberine were selected to synthesize a simulated precipitation and then the baicalin–berberine complex was obtained. Results indicated that the melting point of the complex interposed between baicalin and berberine, and the UV absorption, was different from the mother material. In addition, 1H-NMR integral and high-resolution mass spectroscopy (HR-MS can validate that the binding ratio was 1:1. Compared with baicalin, the chemical shifts of H and C on glucuronide had undergone significant changes by 1H-, 13C-NMR, which proved that electron transfer occurred between the carboxylic proton and the lone pair of electrons on the N atom. Both HLJDT CFP and the baicalin–berberine complex showed protective effects against cobalt chloride-induced neurotoxicity in differentiated PC12 cells. It is a novel idea, studying the material foundation of CFP in Chinese prescriptions.

  2. Influence of culture conditions and medium composition on the production of antibacterial compounds by marine Serratia sp. WPRA3.

    Science.gov (United States)

    Jafarzade, Mahtab; Yahya, Nur Ain; Shayesteh, Fatemeh; Usup, Gires; Ahmad, Asmat

    2013-06-01

    This study was undertaken to investigate the influence of culture conditions and medium components on production of antibacterial compounds by Serratia sp. WPRA3 (JX020764) which was isolated from marine water of Port Dickson, Malaysia. Biochemical, morphological, and molecular characteristics suggested that the isolate is a new candidate of the Serratia sp. The isolate showed strong antimicrobial activity against fungi, Gram-negative and Gram-positive bacteria. This bacterium exhibited optimum antibacterial compounds production at 28°C, pH 7 and 200 rev/min aeration during 72 h of incubation period. Highest antibacterial activity was obtained when sodium chloride (2%), yeast extract (0.5%), and glucose concentration (0.75%) were used as salt, nitrogen, and carbon sources respectively. Different active fractions were obtained by Thin-Layer Chromatography (TLC) and Flash Column Chromatography (FCC) from ethyl acetate crude extracts namely OCE and RCE in different culture conditions, OCE (pH 5, 200 rev/min) and RCE (pH 7/without aeration). In conclusion, the results suggested different culture conditions have a significant impact on the types of secondary metabolites produced by the bacterium.

  3. Thermally activated persulfate oxidation of NAPL chlorinated organic compounds: effect of soil composition on oxidant demand in different soil-persulfate systems.

    Science.gov (United States)

    Liu, Jialu; Liu, Zhehua; Zhang, Fengjun; Su, Xiaosi; Lyu, Cong

    2017-04-01

    This study investigates the interaction of persulfate with soil components and chlorinated volatile organic compounds (CVOCs), using thermally activated persulfate oxidation in three soil types: high sand content; high clay content; and paddy field soil. The effect of soil composition on the available oxidant demand and CVOC removal rate was evaluated. Results suggest that the treatment efficiency of CVOCs in soil can be ranked as follows: cis-1,2-dichloroethene > trichloroethylene > 1,2-dichloroethane > 1,1,1-trichloroethane. The reactions of soil components with persulfate, shown by the reduction in soil phase natural organics and mineral content, occurred in parallel with persulfate oxidation of CVOCs. Natural oxidant demand from the reaction of soil components with persulfate exerted a large relative contribution to the total oxidant demand. The main influencing factor in oxidant demand in paddy-soil-persulfate systems was natural organics, rather than mineral content as seen with sand and clay soil types exposed to the persulfate system. The competition between CVOCs and soil components for oxidation by persulfate indicates that soil composition exhibits a considerable influence on the available oxidant demand and CVOC removal efficiency. Therefore, soil composition of natural organics and mineral content is a critical factor in estimating the oxidation efficiency of in-situ remediation systems.

  4. Changes in the electrical properties of the electrode–skin–underlying tissue composite during a week-long programme of neuromuscular electrical stimulation

    International Nuclear Information System (INIS)

    Bîrlea, S I; Breen, P P; Corley, G J; ÓLaighin, G; Bîrlea, N M; Quondamatteo, F

    2014-01-01

    Particular neuromuscular electrical stimulation (NMES) applications require the use of the same electrodes over a long duration (>1 day) without having access to them. Under such circumstance the quality of the electrode–skin contact cannot be assessed. We used the NMES signal itself to assess the quality of the electrode–skin contact and the electrical properties of the underlying tissues over a week. A 14% decrease in the skin's stratum corneum resistance (from 20 to 17 kΩ) and a 15% decrease in the resistance of the electrodes and underlying tissues (from 550 to 460 Ω) were observed in the 14 healthy subjects investigated. A follow-on investigation of the effect of exercise-induced sweating on the electrical properties of the electrode–skin–underlying tissue composite during NMES indicated a correlation between the decrease in the resistance values observed over the course of the week and the accumulation of sweat at the electrode–skin interface. The value of the capacitance representing the dielectric properties of the skin's stratum corneum increased after exercise-induced sweating but did not change significantly over the course of the week. We conclude that valuable information about the electrode–skin–underlying tissue composite can be gathered using the NMES signal itself, and suggest that this is a practical, safe and relatively simple method for monitoring these electrical properties during long-term stimulation. (paper)

  5. Pyrosequencing of the bacteria associated with Platygyra carnosus corals with skeletal growth anomalies reveals differences in bacterial community composition in apparently healthy and diseased tissues

    Directory of Open Access Journals (Sweden)

    Jenny Chun-Yee Ng

    2015-10-01

    Full Text Available Corals are rapidly declining globally due to coral diseases. Skeletal growth anomalies (SGA or coral tumors are a group of coral diseases that affect coral reefs worldwide, including Hong Kong waters in the Indo-Pacific region. To better understand how bacterial communities may vary in corals with SGA, for the first time, we examined the bacterial composition associated with the apparently healthy and the diseased tissues of SGA-affected Platgyra carnosus using 16S ribosomal rRNA gene pyrosequencing. Taxonomic analysis revealed Proteobacteria, Bacteroidetes, Cyanobacteria, and Actinobacteria as the main phyla in both the apparently healthy and the diseased tissues. A significant difference in the bacterial community composition was observed between the two conditions at the OTU level. Diseased tissues were associated with higher abundances of Acidobacteria and Gemmatimonadetes, and a lower abundance of Spirochaetes. Several OTUs belonging to Rhodobacteraceae, Rhizobiales, Gammaproteobacteria, and Cytophaga-Flavobacterium-Bacteroidetes (CFB were strongly associated with the diseased tissues. These groups of bacteria may contain potential pathogens involved with the development of SGA or opportunistic secondary or tertiary colonizers that proliferated upon the health-compromised coral host. We suggest that these bacterial groups to be further studied based on inoculation experiments and testing of Koch’s postulates in efforts to understand the etiology and progression of SGA.

  6. The influence of tree species composition on the storage and mobility of semivolatile organic compounds in forest soils

    Energy Technology Data Exchange (ETDEWEB)

    Komprdová, Klára, E-mail: komprdova@recetox.muni.cz [RECETOX (Research Centre for Toxic Compounds in the Environment), Kamenice 753/5, CZ-625 00 Brno (Czech Republic); Komprda, Jiří [RECETOX (Research Centre for Toxic Compounds in the Environment), Kamenice 753/5, CZ-625 00 Brno (Czech Republic); Menšík, Ladislav [Mendel University in Brno, Faculty of Forestry and Wood Technology, Zemědělská 3, Brno 613 00 (Czech Republic); Vaňková, Lenka [RECETOX (Research Centre for Toxic Compounds in the Environment), Kamenice 753/5, CZ-625 00 Brno (Czech Republic); Kulhavý, Jiří [Mendel University in Brno, Faculty of Forestry and Wood Technology, Zemědělská 3, Brno 613 00 (Czech Republic); Nizzetto, Luca [RECETOX (Research Centre for Toxic Compounds in the Environment), Kamenice 753/5, CZ-625 00 Brno (Czech Republic); Norwegian Institute for Water Research, Gaustadalleen 21, NO-0349 Oslo (Norway)

    2016-05-15

    Soil contamination with PCBs and PAHs in adjacent forest plo