WorldWideScience

Sample records for tiros-n system definition

  1. Performance of the HIRS/2 instrument on TIROS-N. [High Resolution Infrared Radiation Sounder

    Science.gov (United States)

    Koenig, E. W.

    1980-01-01

    The High Resolution Infrared Radiation Sounder (HIRS/2) was developed and flown on the TIROS-N satellite as one means of obtaining atmospheric vertical profile information. The HIRS/2 receives visible and infrared spectrum radiation through a single telescope and selects 20 narrow radiation channels by means of a rotating filter wheel. A passive radiant cooler provides an operating temperature of 106.7 K for the HgCdTe and InSb detectors while the visible detector operates at instrument frame temperature. Low noise amplifiers and digital processing provide 13 bit data for spacecraft data multiplexing and transmission. The qualities of system performance that determine sounding capability are the dynamic range of data collection, the noise equivalent radiance of the system, the registration of the air columns sampled in each channel and the ability to upgrade the calibration of the instrument to maintain the performance standard throughout life. The basic features, operating characteristics and performance of the instrument in test are described. Early orbital information from the TIROS-N launched on October 13, 1978 is given and some observations on system quality are made.

  2. TIROS-N/NOAA A-J space environment monitor subsystem. Technical memo

    International Nuclear Information System (INIS)

    Seale, R.A.; Bushnell, R.H.

    1987-04-01

    The Space Environment Monitor (SEM), which is incorporated as a subsystem in the TIROS-N and NOAA A-J satellites, is described. The SEM consists of a Total Energy Detector (TED), a Medium Energy Proton and Electron Detector (MEPED), a High Energy Proton and Alpha Detector (HEPAD) and a Data Processing Unit (DPU). The detectors are intended to provide near-real-time particle data for use in the Space Environment Service Center of National Oceanic and Atmospheric Administration (NOAA) and to provide a long-term scientific data base. Telemeter codes, data reduction, and test instructions are given

  3. Integrated security system definition

    International Nuclear Information System (INIS)

    Campbell, G.K.; Hall, J.R. II

    1985-01-01

    The objectives of an integrated security system are to detect intruders and unauthorized activities with a high degree of reliability and the to deter and delay them until effective response/engagement can be accomplished. Definition of an effective integrated security system requires proper application of a system engineering methodology. This paper summarizes a methodology and describes its application to the problem of integrated security system definition. This process includes requirements identification and analysis, allocation of identified system requirements to the subsystem level and provides a basis for identification of synergistic subsystem elements and for synthesis into an integrated system. The paper discusses how this is accomplished, emphasizing at each step how system integration and subsystem synergism is considered. The paper concludes with the product of the process: implementation of an integrated security system

  4. Dual, use-based definition of "system"

    CSIR Research Space (South Africa)

    Gonçalves, DP

    2015-09-01

    Full Text Available The standard definition (ISO 15288, 2008) of the concept of a system is not complete and is the definition of a closed system. Such a definition is inadequate for systems engineering. A use-based definition is proposed which spans the open...

  5. On Mario Bunge's Definition of System and System Boundary

    Science.gov (United States)

    Cavallo, Andrew M.

    2012-01-01

    In this short paper we discuss Mario Bunge's definition of system boundary. It is quickly discovered that Bunge's definition of system and system boundary are both deficient. We thus propose new definitions, which (hopefully) improve the situation. Our definition of system boundary works off the same intuition behind Bunge's.

  6. The evolving definition of systemic arterial hypertension.

    Science.gov (United States)

    Ram, C Venkata S; Giles, Thomas D

    2010-05-01

    Systemic hypertension is an important risk factor for premature cardiovascular disease. Hypertension also contributes to excessive morbidity and mortality. Whereas excellent therapeutic options are available to treat hypertension, there is an unsettled issue about the very definition of hypertension. At what level of blood pressure should we treat hypertension? Does the definition of hypertension change in the presence of co-morbid conditions? This article covers in detail the evolving concepts in the diagnosis and management of hypertension.

  7. The Definition of Novelty in Recommendation System

    Directory of Open Access Journals (Sweden)

    Liang Zhang

    2013-01-01

    Full Text Available With the development of information technology and application of the Internet, People gradually entered the time of information overload from information scarcity. User satisfaction with recommender systems is related not only to how accurately the system recommends but also to how much it supports the user’s decision making. Novelty is one of the important metrics of customer satisfaction. There is an increasing realization in the Recommender Systems (RS field that novelty is fundamental qualities of recommendation effectiveness and added-value. This paper combed research results about definition and algorithm of novel recommendation, and starting from the meaning of "novel", defined novelty of item in recommendation system. Experiment proved using the definition of novelty to recommend can effectively recognize the item that the user is familiar with and ensure certain accuracy.

  8. Volume definition system for treatment planning

    International Nuclear Information System (INIS)

    Alakuijala, Jyrki; Pekkarinen, Ari; Puurunen, Harri

    1997-01-01

    Purpose: Volume definition is a difficult and time consuming task in 3D treatment planning. We have studied a systems approach for constructing an efficient and reliable set of tools for volume definition. Our intent is to automate body outline, air cavities and bone volume definition and accelerate definition of other anatomical structures. An additional focus is on assisting in definition of CTV and PTV. The primary goals of this work are to cut down the time used in contouring and to improve the accuracy of volume definition. Methods: We used the following tool categories: manual, semi-automatic, automatic, structure management, target volume definition, and visualization tools. The manual tools include mouse contouring tools with contour editing possibilities and painting tools with a scaleable circular brush and an intelligent brush. The intelligent brush adapts its shape to CT value boundaries. The semi-automatic tools consist of edge point chaining, classical 3D region growing of single segment and competitive volume growing of multiple segments. We tuned the volume growing function to take into account both local and global region image values, local volume homogeneity, and distance. Heuristic seeding followed with competitive volume growing finds the body outline, couch and air automatically. The structure management tool stores ICD-O coded structures in a database. The codes have predefined volume growing parameters and thus are able to accommodate the volume growing dissimilarity function for different volume types. The target definition tools include elliptical 3D automargin for CTV to PTV transformation and target volume interpolation and extrapolation by distance transform. Both the CTV and the PTV can overlap with anatomical structures. Visualization tools show the volumes as contours or color wash overlaid on an image and displays voxel rendering or translucent triangle mesh rendering in 3D. Results: The competitive volume growing speeds up the

  9. Formalization of Database Systems -- and a Formal Definition of {IMS}

    DEFF Research Database (Denmark)

    Bjørner, Dines; Løvengreen, Hans Henrik

    1982-01-01

    Drawing upon an analogy between Programming Language Systems and Database Systems we outline the requirements that architectural specifications of database systems must futfitl, and argue that only formal, mathematical definitions may 6atisfy these. Then we illustrate home aspects and touch upon...... come ueee of formal definitions of data models and databaee management systems. A formal model of INS will carry this discussion. Finally we survey some of the exkting literature on formal definitions of database systems. The emphasis will be on constructive definitions in the denotationul semantics...... style of the VCM: Vienna Development Nethd. The role of formal definitions in international standardiaation efforts is briefly mentioned....

  10. Metabolomics: Definitions and Significance in Systems Biology.

    Science.gov (United States)

    Klassen, Aline; Faccio, Andréa Tedesco; Canuto, Gisele André Baptista; da Cruz, Pedro Luis Rocha; Ribeiro, Henrique Caracho; Tavares, Marina Franco Maggi; Sussulini, Alessandra

    2017-01-01

    Nowadays, there is a growing interest in deeply understanding biological mechanisms not only at the molecular level (biological components) but also the effects of an ongoing biological process in the organism as a whole (biological functionality), as established by the concept of systems biology. Within this context, metabolomics is one of the most powerful bioanalytical strategies that allow obtaining a picture of the metabolites of an organism in the course of a biological process, being considered as a phenotyping tool. Briefly, metabolomics approach consists in identifying and determining the set of metabolites (or specific metabolites) in biological samples (tissues, cells, fluids, or organisms) under normal conditions in comparison with altered states promoted by disease, drug treatment, dietary intervention, or environmental modulation. The aim of this chapter is to review the fundamentals and definitions used in the metabolomics field, as well as to emphasize its importance in systems biology and clinical studies.

  11. Fission Surface Power System Initial Concept Definition

    Science.gov (United States)

    2010-01-01

    Under the NASA Exploration Technology Development Program (ETDP) and in partnership with the Department of Energy (DOE), NASA has embarked on a project to develop Fission Surface Power (FSP) technology. The primary goals of the project are to 1) develop FSP concepts that meet expected surface power requirements at reasonable cost with added benefits over other options, 2) establish a hardwarebased technical foundation for FSP design concepts and reduce overall development risk, 3) reduce the cost uncertainties for FSP and establish greater credibility for flight system cost estimates, and 4) generate the key products to allow NASA decision-makers to consider FSP as a preferred option for flight development. The FSP project was initiated in 2006 as the Prometheus Program and the Jupiter Icy Moons Orbiter (JIMO) mission were phased-out. As a first step, NASA Headquarters commissioned the Affordable Fission Surface Power System Study to evaluate the potential for an affordable FSP development approach. With a cost-effective FSP strategy identified, the FSP team evaluated design options and selected a Preliminary Reference Concept to guide technology development. Since then, the FSP Preliminary Reference Concept has served as a point-of-departure for several NASA mission architecture studies examining the use of nuclear power and has provided the foundation for a series of "Pathfinder" hardware tests. The long-term technology goal is a Technology Demonstration Unit (TDU) integrated system test using full-scale components and a non-nuclear reactor simulator. The FSP team consists of Glenn Research Center (GRC), Marshall Space Flight Center (MSFC) and the DOE National Laboratories at Los Alamos (LANL), Idaho (INL), Oak Ridge (ORNL), and Sandia (SNL). The project is organized into two main elements: Concept Definition and Risk Reduction. Under Concept Definition, the team performs trade studies, develops analytical tools, and formulates system concepts. Under Risk

  12. Definition of Nonequilibrium Entropy of General Systems

    OpenAIRE

    Mei, Xiaochun

    1999-01-01

    The definition of nonequilibrium entropy is provided for the general nonequilibrium processes by connecting thermodynamics with statistical physics, and the principle of entropy increment in the nonequilibrium processes is also proved in the paper. The result shows that the definition of nonequilibrium entropy is not unique.

  13. A Systems Definition of Educational Technology in Society

    Science.gov (United States)

    Luppicini, Rocci

    2005-01-01

    Conceptual development in the field of Educational Technology provides crucial theoretical grounding for ongoing research and practice. This essay draws from theoretical developments both within and external to the field of Educational Technology to articulate a systems definition of Educational Technology in Society. A systems definition of…

  14. Space rescue system definition (system performance analysis and trades)

    Science.gov (United States)

    Housten, Sam; Elsner, Tim; Redler, Ken; Svendsen, Hal; Wenzel, Sheri

    This paper addresses key technical issues involved in the system definition of the Assured Crew Return Vehicle (ACRV). The perspective on these issues is that of a prospective ACRV contractor, performing system analysis and trade studies. The objective of these analyses and trade studies is to develop the recovery vehicle system concept and top level requirements. The starting point for this work is the definition of the set of design missions for the ACRV. This set of missions encompasses three classes of contingency/emergency (crew illness/injury, space station catastrophe/failure, transportation element catastrophe/failure). The need is to provide a system to return Space Station crew to Earth quickly (less than 24 hours) in response to randomly occurring contingency events over an extended period of time (30 years of planned Space Station life). The main topics addressed and characterized in this paper include the following: Key Recovery (Rescue) Site Access Considerations; Rescue Site Locations and Distribution; Vehicle Cross Range vs Site Access; On-orbit Loiter Capability and Vehicle Design; and Water vs. Land Recovery.

  15. Energy Efficient Engine: Control system preliminary definition report

    Science.gov (United States)

    Howe, David C.

    1986-01-01

    The object of the Control Preliminary Definition Program was to define a preliminary control system concept as a part of the Energy Efficient Engine program. The program was limited to a conceptual definition of a full authority digital electronic control system. System requirements were determined and a control system was conceptually defined to these requirements. Areas requiring technological development were identified and a plan was established for implementing the identified technological features, including a control technology demonstration. A significant element of this program was a study of the potential benefits of closed-loop active clearance control, along with laboratory tests of candidate clearance sensor elements for a closed loop system.

  16. Architectural conceptual definition of the CAREM-25 reactor's control system

    International Nuclear Information System (INIS)

    Perez, J.C.; Santome, D.; Drexler, J.; Escudero, S.

    1990-01-01

    This work presents the conceptual definition of the CAREM 25 reactor's digital and monitoring control system structure. The requirements of the system are analyzed and different implementation alternatives are studied where possible basic architectures of the system and its topology are considered and evaluated. (Author) [es

  17. Solar dynamic power system definition study

    Science.gov (United States)

    Wallin, Wayne E.; Friefeld, Jerry M.

    1988-01-01

    The solar dynamic power system design and analysis study compared Brayton, alkali-metal Rankine, and free-piston Stirling cycles with silicon planar and GaAs concentrator photovoltaic power systems for application to missions beyond the Phase 2 Space Station level of technology for all power systems. Conceptual designs for Brayton and Stirling power systems were developed for 35 kWe and 7 kWe power levels. All power systems were designed for 7-year end-of-life conditions in low Earth orbit. LiF was selected for thermal energy storage for the solar dynamic systems. Results indicate that the Stirling cycle systems have the highest performance (lowest weight and area) followed by the Brayton cycle, with photovoltaic systems considerably lower in performance. For example, based on the performance assumptions used, the planar silicon power system weight was 55 to 75 percent higher than for the Stirling system. A technology program was developed to address areas wherein significant performance improvements could be realized relative to the current state-of-the-art as represented by Space Station. In addition, a preliminary evaluation of hardenability potential found that solar dynamic systems can be hardened beyond the hardness inherent in the conceptual designs of this study.

  18. Towards a General Definition of Biometric Systems

    OpenAIRE

    Mirko Cubrilo; Miroslav Baca; Markus Schatten

    2009-01-01

    A foundation for closing the gap between biometrics in the narrower and the broader perspective is presented trough a conceptualization of biometric systems in both perspectives. A clear distinction between verification, identification and classification systems is made as well as shown that there are additional classes of biometric systems. In the end a Unified Modeling Language model is developed showing the connections between the two perspectives.

  19. Conditional symmetries for systems of PDEs: new definitions and their application for reaction-diffusion systems

    International Nuclear Information System (INIS)

    Cherniha, Roman

    2010-01-01

    New definitions of Q-conditional symmetry for systems of PDEs are presented, which generalize the standard notation of non-classical (conditional) symmetry. It is shown that different types of Q-conditional symmetry of a system generate a hierarchy of conditional symmetry operators. A class of two-component nonlinear reaction-diffusion systems is examined to demonstrate the applicability of the definitions proposed and it is shown when different definitions of Q-conditional symmetry lead to the same operators.

  20. Sandia photovoltaic systems definition and application experiment projects

    Energy Technology Data Exchange (ETDEWEB)

    Jones, G.

    1983-04-01

    A compilation is given of the abstracts and visual material used in presentation at the Fourth Photovoltaic Systems Definition and Applications Projects Integration Meeting held at the Marriott Hotel, April 12-14, 1983, in Albuquerque, New Mexico. The meeting provided a forum for detailed analyses on recently completed and current activities. These activities include systems research, balance-of-system technology development, residential experimentation, and evaluation of intermediate-sized applications.

  1. A Petri Net Definition of a System Description Language

    DEFF Research Database (Denmark)

    Jensen, Kurt; Kyng, Morten; Madsen, Ole Lehrmann

    1979-01-01

    This paper introduces a language for the description of systems with concurrency, and presents a formal definition of its semantics. The language is based on Delta and the semantic model is an extension of Petri nets with a data part and with expressions attached to transitions and to places....

  2. Informatics with Systems Science and Cybernetics--Concepts and Definitions.

    Science.gov (United States)

    Samuelson, Kjell

    This dictionary defines information science, computer science, systems theory, and cybernetic terms in English and provides the Swedish translation of each term. An index of Swedish terms refers the user to the page where the English equivalent and definition appear. Most of the 38 references listed are in English. (RAA)

  3. Systemic Lupus Erythematosus: Definitions, Contexts, Conflicts, Enigmas

    Science.gov (United States)

    Rekvig, Ole Petter

    2018-01-01

    Systemic lupus erythematosus (SLE) is an inadequately defined syndrome. Etiology and pathogenesis remain largely unknown. SLE is on the other hand a seminal syndrome that has challenged immunologists, biologists, genetics, and clinicians to solve its nature. The syndrome is characterized by multiple, etiologically unlinked manifestations. Unexpectedly, they seem to occur in different stochastically linked clusters, although single gene defects may promote a smaller spectrum of symptoms/criteria typical for SLE. There is no known inner coherence of parameters (criteria) making up the disease. These parameters are, nevertheless, implemented in The American College of Rheumatology (ACR) and The Systemic Lupus Collaborating Clinics (SLICC) criteria to classify SLE. Still, SLE is an abstraction since the ACR or SLICC criteria allow us to define hundreds of different clinical SLE phenotypes. This is a major point of the present discussion and uses “The anti-dsDNA antibody” as an example related to the problematic search for biomarkers for SLE. The following discussion will show how problematic this is: the disease is defined through non-coherent classification criteria, its complexity is recognized and accepted, its pathogenesis is plural and poorly understood. Therapy is focused on dominant symptoms or organ manifestations, and not on the syndrome itself. From basic scientific evidences, we can add substantial amount of data that are not sufficiently considered in clinical medicine, which may change the paradigms linked to what “The Anti-DNA antibody” is—and is not—in context of the imperfectly defined syndrome SLE. PMID:29545801

  4. A review of definitions and measures of system resilience

    International Nuclear Information System (INIS)

    Hosseini, Seyedmohsen; Barker, Kash; Ramirez-Marquez, Jose E.

    2016-01-01

    Modeling and evaluating the resilience of systems, potentially complex and large-scale in nature, has recently raised significant interest among both practitioners and researchers. This recent interest has resulted in several definitions of the concept of resilience and several approaches to measuring this concept, across several application domains. As such, this paper presents a review of recent research articles related to defining and quantifying resilience in various disciplines, with a focus on engineering systems. We provide a classification scheme to the approaches in the literature, focusing on qualitative and quantitative approaches and their subcategories. Addressed in this review are: an extensive coverage of the literature, an exploration of current gaps and challenges, and several directions for future research. - Highlights: • A comprehensive review of definitions and measures of system resilience. • Focus given to resilience in engineering systems is provided. • Nearly 150 articles across several domains are reviewed. • Future directions in resilience research are discussed.

  5. 77 FR 11355 - Defense Federal Acquisition Regulation Supplement; Business Systems-Definition and Administration...

    Science.gov (United States)

    2012-02-24

    ...D published an initial proposed rule for Business Systems-- Definition and Administration (DFARS... the definition and administration of contractor business systems as follows: A. Contractor business..., 245, and 252 RIN 0750-AG58 Defense Federal Acquisition Regulation Supplement; Business Systems...

  6. Mars power system concept definition study. Volume 2: Appendices

    Science.gov (United States)

    Littman, Franklin D.

    1994-01-01

    This report documents the work performed by Rockwell International's Rocketdyne Division on NASA Contract No. NAS3-25808 (Task Order No. 16) entitled 'Mars Power System Definition Study'. This work was performed for NASA's Lewis Research Center (LeRC). The report is divided into two volumes as follows: Volume 1 - Study Results; and Volume 2 - Appendices. The results of the power system characterization studies, operations studies, and technology evaluations are summarized in Volume 1. The appendices include complete, standalone technology development plans for each candidate power system that was investigated.

  7. NTP system definition and comparison process for SEI

    International Nuclear Information System (INIS)

    Corban, R.R.

    1993-01-01

    The concept definition, trade-offs, and ultimate selection of a nuclear thermal propulsion (NTP) system that will enable the Space Exploration Initiative (SEI) missions to Mars will require a rigorous systems engineering approach. A systems engineering process to provide a consistent comparison has been established to allow for evolving SEI mission requirements, level of concept definition and changing ''customer'' requirements, while continuing to improve the process as more data becomes available. All concepts will be evaluated against an established baseline NTP system to compare system benefits and merits. Establishing the evaluation criteria is extremely challenging and critical to the evaluation and selection process. Quality function deployment (QFD) will be utilized to provide structure and focus in obtaining the critical needs and attributes of the NTP system. System performance, cost, and risk analysis tools will be integrated into the process to provide the quantitative data required to allow for an informative decision on concept and technology decisions. This process will initiate the framework for design and development of a robust, reliable, cost effective NTP engine within NASA's philosophy for space systems to be developed ''faster, better, and cheaper.''

  8. NTP system definition and comparison process for SEI

    Science.gov (United States)

    Corban, Robert R.

    1993-01-01

    The concept definition, trade-offs, and ultimate selection of a nuclear thermal propulsion (NTP) system that will enable the Space Exploration Initiative (SEI) missions to Mars will require a rigorous systems engineering approach. A systems engineering process to provide a consistent comparison has been established to allow for evolving SEI mission requirements, level of concept definition and changing ``customer'' requirements, while continuing to improve the process as more data becomes available. All concepts will be evaluated against an established baseline NTP system to compare system benefits and merits. Establishing the evaluation criteria is extremely challenging and critical to the evaluation and selection process. Quality function deployment (QFD) will be utilized to provide structure and focus in obtaining the critical needs and attributes of the NTP system. System performance, cost, and risk analysis tools will be integrated into the process to provide the quantitative data required to allow for an informative decision on concept and technology decisions. This process will initiate the framework for design and development of a robust, reliable, cost effective NTP engine within NASA's philosophy for space systems to be developed ``faster, better, and cheaper.''

  9. Distortion definition and correction in off-axis systems

    Science.gov (United States)

    Da Deppo, Vania; Simioni, Emanuele; Naletto, Giampiero; Cremonese, Gabriele

    2015-09-01

    Off-axis optical configurations are becoming more and more used in a variety of applications, in particular they are the most preferred solution for cameras devoted to Solar System planets and small bodies (i.e. asteroids and comets) study. Off-axis designs, being devoid of central obstruction, are able to guarantee better PSF and MTF performance, and thus higher contrast imaging capabilities with respect to classical on-axis designs. In particular they are suitable for observing extended targets with intrinsic low contrast features, or scenes where a high dynamical signal range is present. Classical distortion theory is able to well describe the performance of the on-axis systems, but it has to be adapted for the off-axis case. A proper way to deal with off-axis distortion definition is thus needed together with dedicated techniques to accurately measure and hence remove the distortion effects present in the acquired images. In this paper, a review of the distortion definition for off-axis systems will be given. In particular the method adopted by the authors to deal with the distortion related issues (definition, measure, removal) in some off-axis instruments will be described in detail.

  10. Satellite power system concept development and evaluation program system definition technical assessment report

    Energy Technology Data Exchange (ETDEWEB)

    1980-12-01

    The results of the system definition studies conducted by NASA as a part of the Department of Energy/National Aeronautics and Space Administration SPS Concept Development and Evaluation Program are summarized. The purpose of the system definition efforts was to identify and define candidate SPS concepts and to evaluate the concepts in terms of technical and cost factors. Although the system definition efforts consisted primarily of evaluation and assessment of alternative technical approaches, a reference system was also defined to facilitate economic, environmental, and societal assessments by the Department of Energy. This reference system was designed to deliver 5 GW of electrical power to the utility grid. Topics covered include system definition; energy conversion and power management; power transmission and reception; structures, controls, and materials; construction and operations; and space transportation.

  11. 76 FR 28855 - Defense Federal Acquisition Regulation Supplement; Business Systems-Definition and Administration

    Science.gov (United States)

    2011-05-18

    ...; Business Systems-- Definition and Administration; Interim Rule #0;#0;Federal Register / Vol. 76 , No. 96...-AG58 Defense Federal Acquisition Regulation Supplement; Business Systems--Definition and Administration... an initial proposed rule for Business Systems-- Definition and Administration (DFARS Case 2009-D038...

  12. 75 FR 75549 - Defense Federal Acquisition Regulation Supplement; Business Systems-Definition and Administration...

    Science.gov (United States)

    2010-12-03

    ..., et al. Defense Federal Acquisition Regulation Supplement; Business Systems-- Definition and... Regulation Supplement; Business Systems--Definition and Administration (DFARS Case 2009-D038) AGENCY: Defense.... SUPPLEMENTARY INFORMATION: I. Background DoD published a proposed rule for Business Systems--Definition and...

  13. Alternative definitions of kinetic parameters for accelerator driven systems

    International Nuclear Information System (INIS)

    Talamo, Alberto; Gohar, Yousry; Dulla, Sandra; Ravetto, Piero

    2012-01-01

    Highlights: ► New definition of kinetic parameters for accelerator driven systems. ► Difference between effective and average delayed neutron fraction. ► Difference between effective and average prompt neutron lifetime. ► Effect of the neutron source (Cf, D–D, D–T) on k src . ► Effect of the (n, xn) reactions and source energy-angle distribution on k src . - Abstract: This study introduces a new formulation of kinetic parameters for accelerator driven systems and it is structured into two parts. The first part is dedicated to the classic definition of the kinetic parameters and compares different calculation methodologies. The second part considers a new definition of the kinetic parameters for subcritical assemblies, with particular emphasis on the delayed neutron fraction and the prompt neutron lifetime. This new definition takes into account neutrons from the external neutron source and (n, xn) reactions, which increase the fraction of prompt neutrons. The developed theoretical framework has been applied by Monte Carlo and deterministic calculations to the YALINA Thermal subcritical assembly located in Belarus. This facility can be driven by californium, deuterium–deuterium (D–D), or deuterium–tritium (D–T) external neutron sources. For the D–T neutron source, (n, xn) reactions must be taken into account in order to produce accurate results because the average energy of D–T source neutrons is 14.1 MeV, a value which is much higher than the threshold energy of the (n, 2n) cross section of uranium isotopes.

  14. Supercritical Carbon Dioxide Power Generation System Definition: Concept Definition and Capital Cost Estimate

    Energy Technology Data Exchange (ETDEWEB)

    Stoddard, Larry [Black & Veatch, Kansas City, MO (United States); Galluzzo, Geoff [Black & Veatch, Kansas City, MO (United States); Andrew, Daniel [Black & Veatch, Kansas City, MO (United States); Adams, Shannon [Black & Veatch, Kansas City, MO (United States)

    2016-06-30

    generating approximately 10MWe. This report addresses the concept definition of the sCO2 power generation system, a sub-set of items 2 and 3 above. Other reports address the balance of items 1 to 3 above as well as the MS/sCO2 integrated 10MWe facility, Item 2.

  15. Computer-based route-definition system for peripheral bronchoscopy.

    Science.gov (United States)

    Graham, Michael W; Gibbs, Jason D; Higgins, William E

    2012-04-01

    Multi-detector computed tomography (MDCT) scanners produce high-resolution images of the chest. Given a patient's MDCT scan, a physician can use an image-guided intervention system to first plan and later perform bronchoscopy to diagnostic sites situated deep in the lung periphery. An accurate definition of complete routes through the airway tree leading to the diagnostic sites, however, is vital for avoiding navigation errors during image-guided bronchoscopy. We present a system for the robust definition of complete airway routes suitable for image-guided bronchoscopy. The system incorporates both automatic and semiautomatic MDCT analysis methods for this purpose. Using an intuitive graphical user interface, the user invokes automatic analysis on a patient's MDCT scan to produce a series of preliminary routes. Next, the user visually inspects each route and quickly corrects the observed route defects using the built-in semiautomatic methods. Application of the system to a human study for the planning and guidance of peripheral bronchoscopy demonstrates the efficacy of the system.

  16. Solar power satellite system definition study. Volume 7, phase 1: SPS and rectenna systems analyses

    Science.gov (United States)

    1979-01-01

    A systems definition study of the solar power satellite systems is presented. The design and power distribution of the rectenna system is discussed. The communication subsystem and thermal control characteristics are described and a failure analysis performed on the systems is reported.

  17. GENDER DEFINITION OF MUSICAL ART IN THE EDUCATIONAL SYSTEM

    Directory of Open Access Journals (Sweden)

    V. V. Poliuha

    2017-06-01

    Full Text Available The article interprets the gender issues and their interconnection of musical art that leads to analyzis of music pedagogy and educational system in general. The purpose of the study is the selection and analysis of such gender definitions of music as ender dimension, gender roles, gender approach, the gender component in the system of music education. Methodology of the study is based on the interdisciplinary approach that involves the use of scientific methods of analysis, synthesis and synthesis. Also, there is the method of comparative analysis and analogy applied in understanding the problems related to the study of gender influence in art and education. Originality is reflected in modern educational concept that appeals to the understanding of gender issues as a way of more thorough understanding of individuals, their role status of the individual, which in turn defines social opportunities in educational activities. Accordingly, the modern science can not remain uninvolved into the problems of modern times. Conclusions. Studies of gender in musical art education leads to selection, analyzis and understanding of such definitions as: gender dimension, which is focused on the understanding of the principle of obtaining polysynthetic, gender sensation from a musical work; gender roles, which distinguish representation of women in different kinds of music; gender approach, which establishes the availability of gender imbalance in the system of music education; gender component, which distinguishes the importance of understanding and practical implementation of gender equality in the system of music education.

  18. Operator role definition and human-system integration

    International Nuclear Information System (INIS)

    Knee, H.E.; Schryver, J.C.

    1989-01-01

    This paper discusses operator role definition and human-system integration from a perspective of systems engineering and allocation of functions. Current and traditional allocation of tasks/functions can no longer by applied to systems that are significantly more sophisticated and dynamic than current system designs. For such advanced and automated designs, explicit attention must be given to the role of the operator in order to facilitate efficient system performance. Furthermore, such systems will include intelligent automated systems which will support the cognitive activities of the operator. If such systems share responsibility and control with the human operator, these computer-based assistants/associates should be viewed as intelligent team members. As such, factors such as trust, intentions, and expectancies, among team members must be considered by the systems designer. Such design considerations are discussed in this paper. This paper also discusses the area of dynamic allocation of functions, and the need for models of the human operator in support of machine forecast of human performance. The Integrated Reactor Operator/System (INTEROPS) model is discussed as an example of a cognitive model capable of functioning beyond a rule-based behavioral structure

  19. Mars power system concept definition study. Volume 1: Study results

    Science.gov (United States)

    Littman, Franklin D.

    1994-01-01

    A preliminary top level study was completed to define power system concepts applicable to Mars surface applications. This effort included definition of power system requirements and selection of power systems with the potential for high commonality. These power systems included dynamic isotope, Proton Exchange Membrane (PEM) regenerative fuel cell, sodium sulfur battery, photovoltaic, and reactor concepts. Design influencing factors were identified. Characterization studies were then done for each concept to determine system performance, size/volume, and mass. Operations studies were done to determine emplacement/deployment maintenance/servicing, and startup/shutdown requirements. Technology development roadmaps were written for each candidate power system (included in Volume 2). Example power system architectures were defined and compared on a mass basis. The dynamic isotope power system and nuclear reactor power system architectures had significantly lower total masses than the photovoltaic system architectures. Integrated development and deployment time phasing plans were completed for an example DIPS and reactor architecture option to determine the development strategies required to meet the mission scenario requirements.

  20. Maglev System Concept Definition (SCD) System Safety Review

    Science.gov (United States)

    1993-01-07

    As part of the National Maglev Initiative (NMI), the Federal Railroad : Administration (FRA) solicited proposals to conceptually define the technical feasibility, : performance and costs of constructing and operating Maglev systems in the United : St...

  1. Two different strategies of host manipulation allow parasites to persist in intermediate-definitive host systems

    NARCIS (Netherlands)

    Vries, de L.J.; Langevelde, van F.

    2018-01-01

    Trophically transmitted parasites start their development in an intermediate host, before they finish the development in their definitive host when the definitive host preys on the intermediate host. In intermediate-definitive host systems, two strategies of host manipulation have been evolved:

  2. Integrated Display and Environmental Awareness System - System Architecture Definition

    Science.gov (United States)

    Doule, Ondrej; Miranda, David; Hochstadt, Jake

    2017-01-01

    The Integrated Display and Environmental Awareness System (IDEAS) is an interdisciplinary team project focusing on the development of a wearable computer and Head Mounted Display (HMD) based on Commercial-Off-The-Shelf (COTS) components for the specific application and needs of NASA technicians, engineers and astronauts. Wearable computers are on the verge of utilization trials in daily life as well as industrial environments. The first civil and COTS wearable head mounted display systems were introduced just a few years ago and they probed not only technology readiness in terms of performance, endurance, miniaturization, operability and usefulness but also maturity of practice in perspective of a socio-technical context. Although the main technical hurdles such as mass and power were addressed as improvements on the technical side, the usefulness, practicality and social acceptance were often noted on the side of a broad variety of humans' operations. In other words, although the technology made a giant leap, its use and efficiency still looks for the sweet spot. The first IDEAS project started in January 2015 and was concluded in January 2017. The project identified current COTS systems' capability at minimum cost and maximum applicability and brought about important strategic concepts that will serve further IDEAS-like system development.

  3. Incomplete factorization technique for positive definite linear systems

    International Nuclear Information System (INIS)

    Manteuffel, T.A.

    1980-01-01

    This paper describes a technique for solving the large sparse symmetric linear systems that arise from the application of finite element methods. The technique combines an incomplete factorization method called the shifted incomplete Cholesky factorization with the method of generalized conjugate gradients. The shifted incomplete Cholesky factorization produces a splitting of the matrix A that is dependent upon a parameter α. It is shown that if A is positive definite, then there is some α for which this splitting is possible and that this splitting is at least as good as the Jacobi splitting. The method is shown to be more efficient on a set of test problems than either direct methods or explicit iteration schemes

  4. 77 FR 39858 - Revisions to Electric Reliability Organization Definition of Bulk Electric System and Rules of...

    Science.gov (United States)

    2012-07-05

    ... bulk electric system reliability through steady state power flow, and contain a transient stability... Commission 18 CFR Part 40 Revisions to Electric Reliability Organization Definition of Bulk Electric System... definition of ``bulk electric system'' developed by the North American Electric Reliability Corporation (NERC...

  5. 75 FR 76692 - Defense Federal Acquisition Regulation Supplement; Business Systems-Definition and Administration...

    Science.gov (United States)

    2010-12-09

    ..., and 252 RIN 0750-AG58 Defense Federal Acquisition Regulation Supplement; Business Systems--Definition... for Business Systems--Definition and Administration (DFARS Case 2009-D038) in the Federal Register on... improve the effectiveness of DoD oversight of contractor business systems. The comment period is being...

  6. Orbital transfer vehicle concept definition and system analysis study. Volume 2: OTV concept definition and evaluation. Book 1: Mission and system requirements

    Science.gov (United States)

    Kofal, Allen E.

    1987-01-01

    The mission and system requirements for the concept definition and system analysis of the Orbital Transfer Vehicle (OTV) are established. The requirements set forth constitute the single authority for the selection, evaluation, and optimization of the technical performance and design of the OTV. This requirements document forms the basis for the Ground and Space Based OTV concept definition analyses and establishes the physical, functional, performance and design relationships to STS, Space Station, Orbital Maneuvering Vehicle (OMV), and payloads.

  7. Facility design philosophy: Tank Waste Remediation System Process support and infrastructure definition

    International Nuclear Information System (INIS)

    Leach, C.E.; Galbraith, J.D.; Grant, P.R.; Francuz, D.J.; Schroeder, P.J.

    1995-11-01

    This report documents the current facility design philosophy for the Tank Waste Remediation System (TWRS) process support and infrastructure definition. The Tank Waste Remediation System Facility Configuration Study (FCS) initially documented the identification and definition of support functions and infrastructure essential to the TWRS processing mission. Since the issuance of the FCS, the Westinghouse Hanford Company (WHC) has proceeded to develop information and requirements essential for the technical definition of the TWRS treatment processing programs

  8. Definition of Physical Height Systems for Telluric Planets and Moons

    Science.gov (United States)

    Tenzer, Robert; Foroughi, Ismael; Sjöberg, Lars E.; Bagherbandi, Mohammad; Hirt, Christian; Pitoňák, Martin

    2018-01-01

    In planetary sciences, the geodetic (geometric) heights defined with respect to the reference surface (the sphere or the ellipsoid) or with respect to the center of the planet/moon are typically used for mapping topographic surface, compilation of global topographic models, detailed mapping of potential landing sites, and other space science and engineering purposes. Nevertheless, certain applications, such as studies of gravity-driven mass movements, require the physical heights to be defined with respect to the equipotential surface. Taking the analogy with terrestrial height systems, the realization of height systems for telluric planets and moons could be done by means of defining the orthometric and geoidal heights. In this case, however, the definition of the orthometric heights in principle differs. Whereas the terrestrial geoid is described as an equipotential surface that best approximates the mean sea level, such a definition for planets/moons is irrelevant in the absence of (liquid) global oceans. A more natural choice for planets and moons is to adopt the geoidal equipotential surface that closely approximates the geometric reference surface (the sphere or the ellipsoid). In this study, we address these aspects by proposing a more accurate approach for defining the orthometric heights for telluric planets and moons from available topographic and gravity models, while adopting the average crustal density in the absence of reliable crustal density models. In particular, we discuss a proper treatment of topographic masses in the context of gravimetric geoid determination. In numerical studies, we investigate differences between the geodetic and orthometric heights, represented by the geoidal heights, on Mercury, Venus, Mars, and Moon. Our results reveal that these differences are significant. The geoidal heights on Mercury vary from - 132 to 166 m. On Venus, the geoidal heights are between - 51 and 137 m with maxima on this planet at Atla Regio and Beta

  9. A Common Definition of the System Operators' Core Activities

    International Nuclear Information System (INIS)

    2006-02-01

    In this report a common definition of the system operator's core activities in the Nordic countries is identified and also a list of non-core activities is introduced. As a starting point the common tasks for system responsibility as identified by Nordel has been used for the work. The term TSO (Transmission System Operator) is employed as a common denominator in the report. It is found out that the TSOs carry out common core activities in the roles as a transmission operator, a system operator and a balance settlement responsible. The core activities for the TSO as a transmission network operator are: Maintain the adequate transmission system in the long run and network development plan on the national as well as on the Nordic level using sophisticated analysis and planning methods and tools. Plan the transmission network on the national as well as on the Nordic level utilising new investments, renewal and maintenance of existing network components so that the network is secure to operate and adequate transmission capacity is guaranteed. Aim at timely network expansions using enhanced information exchange between the Nordic TSOs, and on the national level between the TSO and distribution and regional network operators, large consumers and large producers. Secure the technical compatibility with networks across the border and within a country by establishing connection requirements on the national level and ensuring that the national requirements are compatible across the Nordic power system. The core activities for the TSO as a system operator are: Define common technical requirements for the secure system operation using common planning, operation, connection and data exchange procedures. Secure the system operation with the operational planning for the following year by using information exchange between TSOs enabling the TSOs to make the best possible forecast of the global grid situation in order to assess the flows in their network and the available

  10. 78 FR 29209 - Revisions to Electric Reliability Organization Definition of Bulk Electric System and Rules of...

    Science.gov (United States)

    2013-05-17

    ... Commission 18 CFR Part 40 Revisions to Electric Reliability Organization Definition of Bulk Electric System... local distribution'' as set forth in the Federal Power Act (FPA). \\1\\ Revisions to Electric Reliability... Reliability Organization Definition of Bulk Electric System, Order No. 743, 133 FERC ] 61,150, at P 16 (2010...

  11. 76 FR 16263 - Revision to Electric Reliability Organization Definition of Bulk Electric System

    Science.gov (United States)

    2011-03-23

    ...; Order No. 743-A] Revision to Electric Reliability Organization Definition of Bulk Electric System AGENCY... certain provisions of the Final Rule. Order No. 743 directed the Electric Reliability Organization (ERO) to revise the definition of the term ``bulk electric system'' through the ERO's Reliability Standards...

  12. Identifying digital records in business systems: the definition of a ...

    African Journals Online (AJOL)

    Julia Kastenhofer

    elements. While Thibodeau and the UN Archives and. Records Management section ... architecture, which units and how many ... have ample experience applying these .... as an Organic Component of .... Materials: A Practical Definition",.

  13. Topology of event distributions as a generalized definition of phase transitions in finite systems

    International Nuclear Information System (INIS)

    Chomaz, Ph.; Duflot, V.; Gulminelli, F.; Duflot, V.

    2000-01-01

    We propose a definition of phase transitions in finite systems based on topology anomalies of the event distribution in the space of observations. This generalizes all the definitions based on the curvature anomalies of thermodynamical potentials and provides a natural definition of order parameters. It is directly operational from the experimental point of view. It allows to study phase transitions in Gibbs equilibria as well as in other ensembles such as the Tsallis ensemble. (author)

  14. Evolving the Living With a Star Data System Definition

    Science.gov (United States)

    Otranto, J. F.; Dijoseph, M.

    2003-12-01

    NASA's Living With a Star (LWS) Program is a space weather-focused and applications-driven research program. The LWS Program is soliciting input from the solar, space physics, space weather, and climate science communities to develop a system that enables access to science data associated with these disciplines, and advances the development of discipline and interdisciplinary findings. The LWS Program will implement a data system that builds upon the existing and planned data capture, processing, and storage components put in place by individual spacecraft missions and also inter-project data management systems, including active and deep archives, and multi-mission data repositories. It is technically feasible for the LWS Program to integrate data from a broad set of resources, assuming they are either publicly accessible or allow access by permission. The LWS Program data system will work in coordination with spacecraft mission data systems and science data repositories, integrating their holdings using a common metadata representation. This common representation relies on a robust metadata definition that provides journalistic and technical data descriptions, plus linkages to supporting data products and tools. The LWS Program intends to become an enabling resource to PIs, interdisciplinary scientists, researchers, and students facilitating both access to a broad collection of science data, as well as the necessary supporting components to understand and make productive use of these data. For the LWS Program to represent science data that are physically distributed across various ground system elements, information will be collected about these distributed data products through a series of LWS Program-created agents. These agents will be customized to interface or interact with each one of these data systems, collect information, and forward any new metadata records to a LWS Program-developed metadata library. A populated LWS metadata library will function as a

  15. 45 CFR 205.35 - Mechanized claims processing and information retrieval systems; definitions.

    Science.gov (United States)

    2010-10-01

    ... claims processing and information retrieval systems; definitions. Section 205.35 through 205.38 contain...: (a) A mechanized claims processing and information retrieval system, hereafter referred to as an automated application processing and information retrieval system (APIRS), or the system, means a system of...

  16. Efficient methodology for multibody simulations with discontinuous changes in system definition

    International Nuclear Information System (INIS)

    Mukherjee, Rudranarayan M.; Anderson, Kurt S.

    2007-01-01

    A new method is presented for accurately and efficiently simulating multi-scale multibody systems with discontinuous changes in system definitions as encountered in adaptive switching between models with different resolutions as well as models with different system topologies. An example of model resolution change is a transition of a system from a discrete particle model to a reduced order articulated multi-rigid body model. The discontinuous changes in system definition may be viewed as an instantaneous change (release or impulsive application of) the system constraints. The method uses a spatial impulse-momentum formulation in a divide and conquer scheme. The approach utilizes a hierarchic assembly-disassembly process by traversing the system topology in a binary tree map to solve for the jumps in the system generalized speeds and the constraint impulsive loads in linear and logarithmic cost in serial and parallel implementations, respectively. The method is applicable for systems in serial chain as well as kinematical loop topologies. The coupling between the unilateral and bilateral constraints is handled efficiently through the use of kinematic joint definitions. The equations of motion for the system are produced in a hierarchic sub-structured form. This has the advantage that changes in sub-structure definitions/models results in a change to the system equations only within the associated sub-structure. This allows for significant changes in model types and definitions without having to reformulate the equations for the whole system

  17. 78 FR 29657 - Prevailing Rate Systems; Definition of Vanderburgh County, Indiana, to a Nonappropriated Fund...

    Science.gov (United States)

    2013-05-21

    ...-AM82 Prevailing Rate Systems; Definition of Vanderburgh County, Indiana, to a Nonappropriated Fund... County, IN; and Jefferson and Pulaski Counties, MO. The Federal Prevailing Rate Advisory Committee, the... as follows: [[Page 29658

  18. 75 FR 72909 - Revision to Electric Reliability Organization Definition of Bulk Electric System

    Science.gov (United States)

    2010-11-26

    ... Bulk-Power System. See Rules Concerning Certification of the Electric Reliability Organization; and... Bulk-Power System in North America because it protects the reliability of the bulk electric system and... Electric Reliability Organization Definition of Bulk Electric System; Final Rule #0;#0;Federal Register...

  19. On the definition of a theoretical concept of an operating system

    NARCIS (Netherlands)

    Bergstra, J.A.; Middelburg, C.A.

    2010-01-01

    We dwell on how a definition of a theoretical concept of an operating system, suitable to be incorporated in a mathematical theory of operating systems, could look like. This is considered a valuable preparation for the development of a mathematical theory of operating systems.

  20. Definition of multi-state weighted k-out-of-n: F systems

    DEFF Research Database (Denmark)

    Ding, Yi; Wu, Qiuwei; Zio, Enrico

    2012-01-01

    of the Multi-state Weighted k-out-of-n: G System- the Multi-state Weighted k-out-of-n: F System has not been clearly defined and discussed. In this short communication, the basic definition of the Multi-state Weighted k-out-of-n: F System model is proposed. The relationship between the Multi-state Weighted k...

  1. Satellite Power Systems (SPS) concept definition study. Volume 6: SPS technology requirements and verification

    Science.gov (United States)

    Hanley, G.

    1978-01-01

    Volume 6 of the SPS Concept Definition Study is presented and also incorporates results of NASA/MSFC in-house effort. This volume includes a supporting research and technology summary. Other volumes of the final report that provide additional detail are as follows: (1) Executive Summary; (2) SPS System Requirements; (3) SPS Concept Evolution; (4) SPS Point Design Definition; (5) Transportation and Operations Analysis; and Volume 7, SPS Program Plan and Economic Analysis.

  2. Preconceptual ABC design definition and system configuration layout

    International Nuclear Information System (INIS)

    Barthold, W.

    1995-03-01

    This document is the conceptual design document for the follow-on to the Molten Salt Breeder Reactor, known as the ABC type reactor. It addresses blanket design options, containment options, off-gas systems, drainage systems, and components/layouts of the primary, secondary, and tertiary systems, and it contains a number of diagrams for the configuration of the major systems

  3. Data from: Two different strategies of host manipulation allow parasites to persist in intermediate-definitive host systems

    NARCIS (Netherlands)

    Vries, de Lana; Langevelde, van F.

    2017-01-01

    Trophically-transmitted parasites start their development in an intermediate host, before they finish the development in their definitive host when the definitive host preys on the intermediate host. In intermediate-definitive host systems, two strategies of host manipulation have been evolved:

  4. Applying systems biology to biomedical research and health care: a précising definition of systems medicine.

    Science.gov (United States)

    Schleidgen, Sebastian; Fernau, Sandra; Fleischer, Henrike; Schickhardt, Christoph; Oßa, Ann-Kristin; Winkler, Eva C

    2017-11-21

    Systems medicine has become a key word in biomedical research. Although it is often referred to as P4-(predictive, preventive, personalized and participatory)-medicine, it still lacks a clear definition and is open to interpretation. This conceptual lack of clarity complicates the scientific and public discourse on chances, risks and limits of Systems Medicine and may lead to unfounded hopes. Against this background, our goal was to develop a sufficiently precise and widely acceptable definition of Systems Medicine. In a first step, PubMed was searched using the keyword "systems medicine". A data extraction tabloid was developed putting forward a means/ends-division. Full-texts of articles containing Systems Medicine in title or abstract were screened for definitions. Definitions were extracted; their semantic elements were assigned as either means or ends. To reduce complexity of the resulting list, summary categories were developed inductively. In a second step, we applied six criteria for adequate definitions (necessity, non-circularity, non-redundancy, consistency, non-vagueness, and coherence) to these categories to derive a so-called précising definition of Systems Medicine. We identified 185 articles containing the term Systems Medicine in title or abstract. 67 contained at least one definition of Systems Medicine. In 98 definitions, we found 114 means and 132 ends. From these we derived the précising definition: Systems Medicine is an approach seeking to improve medical research (i.e. the understanding of complex processes occurring in diseases, pathologies and health states as well as innovative approaches to drug discovery) and health care (i.e. prevention, prediction, diagnosis and treatment) through stratification by means of Systems Biology (i.e. data integration, modeling, experimentation and bioinformatics). Our study also revealed the visionary character of Systems Medicine. Our insights, on the one hand, allow for a realistic identification of

  5. Time domain series system definition and gear set reliability modeling

    International Nuclear Information System (INIS)

    Xie, Liyang; Wu, Ningxiang; Qian, Wenxue

    2016-01-01

    Time-dependent multi-configuration is a typical feature for mechanical systems such as gear trains and chain drives. As a series system, a gear train is distinct from a traditional series system, such as a chain, in load transmission path, system-component relationship, system functioning manner, as well as time-dependent system configuration. Firstly, the present paper defines time-domain series system to which the traditional series system reliability model is not adequate. Then, system specific reliability modeling technique is proposed for gear sets, including component (tooth) and subsystem (tooth-pair) load history description, material priori/posterior strength expression, time-dependent and system specific load-strength interference analysis, as well as statistically dependent failure events treatment. Consequently, several system reliability models are developed for gear sets with different tooth numbers in the scenario of tooth root material ultimate tensile strength failure. The application of the models is discussed in the last part, and the differences between the system specific reliability model and the traditional series system reliability model are illustrated by virtue of several numerical examples. - Highlights: • A new type of series system, i.e. time-domain multi-configuration series system is defined, that is of great significance to reliability modeling. • Multi-level statistical analysis based reliability modeling method is presented for gear transmission system. • Several system specific reliability models are established for gear set reliability estimation. • The differences between the traditional series system reliability model and the new model are illustrated.

  6. A contemporary view of systems engineering. [definition of system and discussion of systems approach

    Science.gov (United States)

    Miles, R. F., Jr.

    1974-01-01

    The concept of a 'system' is defined, and the 'systems approach' is discussed. Four contemporary examples of the systems approach are presented: an operations research project, the planning-programming-budgeting system, an information processing system, and aerospace programs.

  7. Conceptual definition of Automated Power Systems Management. [for planetary spacecraft

    Science.gov (United States)

    Imamura, M. S.; Skelly, L.; Weiner, H.

    1977-01-01

    Automated Power Systems Management (APSM) is defined as the capability of a spacecraft power system to automatically perform monitoring, computational, command, and control functions without ground intervention. Power systems for future planetary spacecraft must have this capability because they must perform up to 10 years, and accommodate real-time changes in mission execution autonomously. Specific APSM functions include fault detection, isolation, and correction; system performance and load profile prediction; power system optimization; system checkout; and data storage and transmission control. This paper describes the basic method of implementing these specific functions. The APSM hardware includes a central power system computer and a processor dedicated to each major power system subassembly along with digital interface circuitry. The major payoffs anticipated are in enhancement of spacecraft reliability and life and reduction of overall spacecraft program cost.

  8. 78 FR 60182 - Prevailing Rate Systems; Definition of Broward County, Florida, to a Nonappropriated Fund Federal...

    Science.gov (United States)

    2013-10-01

    ... OFFICE OF PERSONNEL MANAGEMENT 5 CFR Part 532 RIN 3206-AM83 Prevailing Rate Systems; Definition of... wage area. The Federal Prevailing Rate Advisory Committee, the national labor-management committee... follows: PART 532--PREVAILING RATE SYSTEMS 0 1. The authority citation for part 532 continues to read as...

  9. 78 FR 29658 - Prevailing Rate Systems; Definition of Broward County, Florida, to a Nonappropriated Fund Federal...

    Science.gov (United States)

    2013-05-21

    ... OFFICE OF PERSONNEL MANAGEMENT 5 CFR Part 532 RIN 3206-AM83 Prevailing Rate Systems; Definition of... and Palm Beach Counties, FL. The Federal Prevailing Rate Advisory Committee, the national labor... 532--PREVAILING RATE SYSTEMS 0 1. The authority citation for part 532 continues to read as follows...

  10. Compendium of Executive Summaries from the Maglev System Concept Definition. Final Reports.

    Science.gov (United States)

    1993-03-01

    This report contains the Executive Summaries from the four System Concept Definition (SCD) studies awarded under the National Maglev Initiative...These summaries present the technical feasibility, performance, capital, operating and maintenance costs for a maglev system that would be available by

  11. Formal definition of coherency and computation of minimal cut sequences for binary dynamic and repairable systems

    International Nuclear Information System (INIS)

    Chaux, Pierre-Yves

    2013-01-01

    Preventive risk assessment of a complex system rely on a dynamic models which describe the link between the system failure and the scenarios of failure and repair events from its components. The qualitative analyses of a binary dynamic and repairable system is aiming at computing and analyse the scenarios that lead to the system failure. Since such systems describe a large set of those, only the most representative ones, called Minimal Cut Sequences (MCS), are of interest for the safety engineer. The lack of a formal definition for the MCS has generated multiple definitions either specific to a given model (and thus not generic) or informal. This work proposes i) a formal framework and definition for the MCS while staying independent of the reliability model used, ii) the methodology to compute them using property extracted from their formal definition, iii) an extension of the formal framework for multi-states components in order to perform the qualitative analyses of Boolean logic Driven Markov Processes (BDMP) models. Under the hypothesis that the scenarios implicitly described by any reliability model can always be represented by a finite automaton, this work is defining the coherency for dynamic and repairable systems as the way to give a minimal representation of all scenarios that are leading to the system failure. (author)

  12. Identifying digital records in business systems: the definition of a ...

    African Journals Online (AJOL)

    Before digital records can be preserved or managed, they need to be identified first. However, records identification is not a clearly defined process. Given the multi-faceted information system environment in organisations, large quantities of potential records are created and stored in systems not designed for records ...

  13. Preconceptual ABC design definition and system configuration layout: Appendix A

    International Nuclear Information System (INIS)

    1995-03-01

    The mission of the ABC system is to destroy as effectively as possible the fissile material inserted into the core without producing any new fissile material. The contents of this report are as follows: operating conditions for the steam-cycle ABC system; flow rates and component dimensions; drawings of the ABC layout; and impact of core design parameters on containment size

  14. Three suggestions on the definition of terms for the safety and reliability analysis of digital systems

    International Nuclear Information System (INIS)

    Kim, Man Cheol; Smidts, Carol S.

    2015-01-01

    As digital instrumentation and control systems are being progressively introduced into nuclear power plants, a growing number of related technical issues are coming to light needing to be resolved. As a result, an understanding of relevant terms and basic concepts becomes increasingly important. Under the framework of the OECD/NEA WGRISK DIGREL Task Group, the authors were involved in reviewing definitions of terms forming the supporting vocabulary for addressing issues related to the safety and reliability analysis of digital instrumentation and control (SRA of DI and C). These definitions were extracted from various standards regulating the disciplines that form the technical and scientific basis of SRA DI and C. The authors discovered that different definitions are provided by different standards within a common discipline and used differently across various disciplines. This paper raises the concern that a common understanding of terms and basic concepts has not yet been established to address the very specific technical issues facing SRA DI and C. Based on the lessons learned from the review of the definitions of interest and the analysis of dependency relationships existing between these definitions, this paper establishes a set of recommendations for the development of a consistent terminology for SRA DI and C. - Highlights: ●We reviewed definitions of terms used in reliability analysis of digital systems. ●Different definitions are provided by different standards within a common discipline. ●Acyclic and cyclic structures of dependency in defining terms are compared. ●Three recommendations for the development of a consistent terminology provided

  15. Stakeholder Definition for Indonesian Integrated Agriculture Information System (IAIS)

    Science.gov (United States)

    Budi Santoso, Halim; Delima, Rosa

    2017-03-01

    Stakeholders plays an important roles to determine the system requirements. Stakeholders are people or organizations that has an interest to the enterprise. Timely and effective consultation of relevant stakeholders is a paramount importance in the requirements engineering process. From the research and analysis of system stakeholder finds that there are four stakeholder groups in IAIS. Stakeholder analysis is being implemented by identifying stakeholder, stakeholder category, and analysis interaction between stakeholders.

  16. Software requirements definition Shipping Cask Analysis System (SCANS)

    International Nuclear Information System (INIS)

    Johnson, G.L.; Serbin, R.

    1985-01-01

    The US Nuclear Regulatory Commission (NRC) staff reviews the technical adequacy of applications for certification of designs of shipping casks for spent nuclear fuel. In order to confirm an acceptable design, the NRC staff may perform independent calculations. The current NRC procedure for confirming cask design analyses is laborious and tedious. Most of the work is currently done by hand or through the use of a remote computer network. The time required to certify a cask can be long. The review process may vary somewhat with the engineer doing the reviewing. Similarly, the documentation on the results of the review can also vary with the reviewer. To increase the efficiency of this certification process, LLNL was requested to design and write an integrated set of user-oriented, interactive computer programs for a personal microcomputer. The system is known as the NRC Shipping Cask Analysis System (SCANS). The computer codes and the software system supporting these codes are being developed and maintained for the NRC by LLNL. The objective of this system is generally to lessen the time and effort needed to review an application. Additionally, an objective of the system is to assure standardized methods and documentation of the confirmatory analyses used in the review of these cask designs. A software system should be designed based on NRC-defined requirements contained in a requirements document. The requirements document is a statement of a project's wants and needs as the users and implementers jointly understand them. The requirements document states the desired end products (i.e. WHAT's) of the project, not HOW the project provides them. This document describes the wants and needs for the SCANS system. 1 fig., 3 tabs

  17. Traffic flow wide-area surveillance system definition

    Energy Technology Data Exchange (ETDEWEB)

    Allgood, G.O.; Ferrell, R.K.; Kercel, S.W.; Abston, R.A.; Carnal, C.L. [Oak Ridge National Lab., TN (United States); Moynihan, P.I. [Jet Propulsion Lab., Pasadena, CA (United States)

    1994-11-01

    Traffic Flow Wide-Area Surveillance (TFWAS) is a system for assessing the state of traffic flow over a wide area for enhanced traffic control and improved traffic management and planning. The primary purpose of a TFWAS system is to provide a detailed traffic flow description and context description to sophisticated traffic management and control systems being developed or envisioned for the future. A successful TFWAS system must possess the attributes of safety, reconfigurability, reliability, and expandability. The primary safety premise of TFWAS is to ensure that no action or failure of the TFWAS system or its components can result in risk of injury to humans. A wide variety of communication techniques is available for use with TFWAS systems. These communication techniques can be broken down into two categories, landlines and wireless. Currently used and possible future traffic sensing technologies have been examined. Important criteria for selecting TFWAS sensors include sensor capabilities, costs, operational constraints, sensor compatibility with the infrastructure, and extent. TFWAS is a concept that can take advantage of the strengths of different traffic sensing technologies, can readily adapt to newly developed technologies, and can grow with the development of new traffic control strategies. By developing innovative algorithms that will take information from a variety of sensor types and develop descriptions of traffic flows over a wide area, a more comprehensive understanding of the traffic state can be provided to the control system to perform the most reasonable control actions over the entire wide area. The capability of characterizing the state of traffic over an entire region should revolutionize developments in traffic control strategies.

  18. System Definition and Analysis: Power Plant Design and Layout

    International Nuclear Information System (INIS)

    1996-01-01

    This is the Topical report for Task 6.0, Phase 2 of the Advanced Turbine Systems (ATS) Program. The report describes work by Westinghouse and the subcontractor, Gilbert/Commonwealth, in the fulfillment of completing Task 6.0. A conceptual design for critical and noncritical components of the gas fired combustion turbine system was completed. The conceptual design included specifications for the flange to flange gas turbine, power plant components, and balance of plant equipment. The ATS engine used in the conceptual design is an advanced 300 MW class combustion turbine incorporating many design features and technologies required to achieve ATS Program goals. Design features of power plant equipment and balance of plant equipment are described. Performance parameters for these components are explained. A site arrangement and electrical single line diagrams were drafted for the conceptual plant. ATS advanced features include design refinements in the compressor, inlet casing and scroll, combustion system, airfoil cooling, secondary flow systems, rotor and exhaust diffuser. These improved features, integrated with prudent selection of power plant and balance of plant equipment, have provided the conceptual design of a system that meets or exceeds ATS program emissions, performance, reliability-availability-maintainability, and cost goals

  19. Definition of an emotion-based controller for dynamical systems

    Directory of Open Access Journals (Sweden)

    José Danilo Rairán Antolines

    2012-09-01

    Full Text Available An enormous number of solutions have been proposed from the field of artificial intelligence in order to endow machines with the ability to make plans without human guidance. In this paper, we suggest emulated emotions to endow machines with the skills to make human-like decisions. The model is described using dynamical systems. Emotional states are defined in terms of the difference between a reference model and the trajectories of the system. For example, calmness is defined as the ideal emotional state, where there is agreement between the state of the system and the reference model. Finally, a basic architecture for this kind of emotional-based controller is provided together with some experimental results that illustrate its use.

  20. INTEGRATED PYROLYSIS COMBINED CYCLE BIOMASS POWER SYSTEM CONCEPT DEFINITION

    International Nuclear Information System (INIS)

    Sandvig, Eric; Walling, Gary; Brown, Robert C.; Pletka, Ryan; Radlein, Desmond; Johnson, Warren

    2003-01-01

    Advanced power systems based on integrated gasification/combined cycles (IGCC) are often presented as a solution to the present shortcomings of biomass as fuel. Although IGCC has been technically demonstrated at full scale, it has not been adopted for commercial power generation. Part of the reason for this situation is the continuing low price for coal. However, another significant barrier to IGCC is the high level of integration of this technology: the gas output from the gasifier must be perfectly matched to the energy demand of the gas turbine cycle. We are developing an alternative to IGCC for biomass power: the integrated (fast) pyrolysis/ combined cycle (IPCC). In this system solid biomass is converted into liquid rather than gaseous fuel. This liquid fuel, called bio-oil, is a mixture of oxygenated organic compounds and water that serves as fuel for a gas turbine topping cycle. Waste heat from the gas turbine provides thermal energy to the steam turbine bottoming cycle. Advantages of the biomass-fueled IPCC system include: combined cycle efficiency exceeding 37 percent efficiency for a system as small as 7.6 MW e ; absence of high pressure thermal reactors; decoupling of fuel processing and power generation; and opportunities for recovering value-added products from the bio-oil. This report provides a technical overview of the system including pyrolyzer design, fuel clean-up strategies, pyrolysate condenser design, opportunities for recovering pyrolysis byproducts, gas turbine cycle design, and Rankine steam cycle. The report also reviews the potential biomass fuel supply in Iowa, provide and economic analysis, and present a summery of benefits from the proposed system

  1. INTEGRATED PYROLYSIS COMBINED CYCLE BIOMASS POWER SYSTEM CONCEPT DEFINITION

    Energy Technology Data Exchange (ETDEWEB)

    Eric Sandvig; Gary Walling; Robert C. Brown; Ryan Pletka; Desmond Radlein; Warren Johnson

    2003-03-01

    Advanced power systems based on integrated gasification/combined cycles (IGCC) are often presented as a solution to the present shortcomings of biomass as fuel. Although IGCC has been technically demonstrated at full scale, it has not been adopted for commercial power generation. Part of the reason for this situation is the continuing low price for coal. However, another significant barrier to IGCC is the high level of integration of this technology: the gas output from the gasifier must be perfectly matched to the energy demand of the gas turbine cycle. We are developing an alternative to IGCC for biomass power: the integrated (fast) pyrolysis/ combined cycle (IPCC). In this system solid biomass is converted into liquid rather than gaseous fuel. This liquid fuel, called bio-oil, is a mixture of oxygenated organic compounds and water that serves as fuel for a gas turbine topping cycle. Waste heat from the gas turbine provides thermal energy to the steam turbine bottoming cycle. Advantages of the biomass-fueled IPCC system include: combined cycle efficiency exceeding 37 percent efficiency for a system as small as 7.6 MW{sub e}; absence of high pressure thermal reactors; decoupling of fuel processing and power generation; and opportunities for recovering value-added products from the bio-oil. This report provides a technical overview of the system including pyrolyzer design, fuel clean-up strategies, pyrolysate condenser design, opportunities for recovering pyrolysis byproducts, gas turbine cycle design, and Rankine steam cycle. The report also reviews the potential biomass fuel supply in Iowa, provide and economic analysis, and present a summery of benefits from the proposed system.

  2. Intelligent Learning Management Systems: Definition, Features and Measurement of Intelligence

    Science.gov (United States)

    Fardinpour, Ali; Pedram, Mir Mohsen; Burkle, Martha

    2014-01-01

    Virtual Learning Environments have been the center of attention in the last few decades and help educators tremendously with providing students with educational resources. Since artificial intelligence was used for educational proposes, learning management system developers showed much interest in making their products smarter and more…

  3. Compendium of Authenticated Systems and Logistics Terms, Definitions and Acronyms

    Science.gov (United States)

    1981-04-01

    total weaponi-upport system or its components. The cost f a program element is divided: (1) re.tearch quantity of buy wili include end items igenerally ...and aircraft support such actions as: (1) I)iscontinuing in-puts to the equipment to be mintminei. IGenerally , tn( higher maintenance facilit is: (2

  4. Spent fuel reprocessing system availability definition by process simulation

    International Nuclear Information System (INIS)

    Holder, N.; Haldy, B.B.; Jonzen, M.

    1978-05-01

    To examine nuclear fuel reprocessing plant operating parameters such as maintainability, reliability, availability, equipment redundancy, and surge storage requirements and their effect on plant throughput, a computer simulation model of integrated HTGR fuel reprocessing plant operations is being developed at General Atomic Company (GA). The simulation methodology and the status of the computer programming completed on reprocessing head end systems is reported

  5. Features of course definition system control for a mode of preliminary bringing to horizon

    Directory of Open Access Journals (Sweden)

    О.А. Сущенко

    2004-03-01

    Full Text Available  The features of course definition system consisting of   platform in gimbal suspension, tuned rotor gyroscopes and pendulous accelerometers for a mode of preliminary bringing to horizon are reviewed. The mathematical description of the mode of preliminary bringing to horizon is derived and the appropriate control moments are determined.

  6. Ontology for Life-Cycle Modeling of Water Distribution Systems: Model View Definition

    Science.gov (United States)

    2013-06-01

    attributes with a defined datatype indicating a measure datatype ; • To all properties and quantities with a defined datatype indicating a measure... datatype and with no local unit definitions provided. 3.2.3.4 Project context A project representation context indicates the coordinate system orienta

  7. On the definition of equilibrium and non-equilibrium states in dynamical systems

    OpenAIRE

    Akimoto, Takuma

    2008-01-01

    We propose a definition of equilibrium and non-equilibrium states in dynamical systems on the basis of the time average. We show numerically that there exists a non-equilibrium non-stationary state in the coupled modified Bernoulli map lattice.

  8. Auditing description-logic-based medical terminological systems by detecting equivalent concept definitions

    NARCIS (Netherlands)

    Cornet, Ronald; Abu-Hanna, Ameen

    2008-01-01

    OBJECTIVE: To specify and evaluate a method for auditing medical terminological systems (TSs) based on detecting concepts with equivalent definitions. This method addresses two important problems: redundancy, where the same concept is represented more than once (described by different terms), and

  9. Management approach recommendations. Earth Observatory Satellite system definition study (EOS)

    Science.gov (United States)

    1974-01-01

    Management analyses and tradeoffs were performed to determine the most cost effective management approach for the Earth Observatory Satellite (EOS) Phase C/D. The basic objectives of the management approach are identified. Some of the subjects considered are as follows: (1) contract startup phase, (2) project management control system, (3) configuration management, (4) quality control and reliability engineering requirements, and (5) the parts procurement program.

  10. Business Rules Definition for Decision Support System Using Matrix Grammar

    Directory of Open Access Journals (Sweden)

    Eva Zámečníková

    2016-06-01

    Full Text Available This paper deals with formalization of business rules by formal grammars. In our work we focus on methods for high frequency data processing. We process data by using complex event platforms (CEP which allow to process high volume of data in nearly real time. Decision making process is contained by one level of processing of CEP. Business rules are used for decision making process description. For the business rules formalization we chose matrix grammar. The use of formal grammars is quite natural as the structure of rules and its rewriting is very similar both for the business rules and for formal grammar. In addition the matrix grammar allows to simulate dependencies and correlations between the rules. The result of this work is a model for data processing of knowledge-based decision support system described by the rules of formal grammar. This system will support the decision making in CEP. This solution may contribute to the speedup of decision making process in complex event processing and also to the formal verification of these systems.

  11. Definition of an arcjet propulsion sub-system

    International Nuclear Information System (INIS)

    Price, T.W.

    1989-01-01

    An engineering flight demonstration of a 100 kW3 Space Reactor Power System is planned for the mid to late 1990s. An arcjet based propulsion subsystem will be included on the flight demonstraction as a secondary experiment. Two studies, sponsored by the Kay Technologies Directorate of the SDI Organization and managed by the Jet Propulsion Laboratory are currently under way to define that propulsion subsystem. The principal tasks of those contracts and the plans for two later phases, an experimental verification of the concept and a flight qualification/delivery of a flight unit, are described. 9 refs

  12. Product/Service-System Origins and Trajectories: A Systematic Literature Review of PSS Definitions and their Characteristics

    DEFF Research Database (Denmark)

    Haase, Ronja P.; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

    2017-01-01

    Literature provides multiple definitions on Product/Service-Systems (PSS), and as the field develops, certain trajectories emerge. The purpose ofthis article is to provide an overview of the stabilization of PSS definitions within PSS research, by presenting the most prominent PSS definitionsand...... their interrelationships. As the result of a strict protocol, the paper identifies 52 prominent definitions related to PSS, where the citationrelations between the prominent definitions are studied and graphically illustrated. The definitions are furthermore analyzed to identify commonPSS definition characteristics...... and eleven different characteristics identified. Descriptive analysis is carried out on the identified PSS definitioncharacteristics, to determine commonalties and differences in the field. Even though the literature provides many different variations of PSS definitions, there is certain convergence...

  13. Development of a definition, classification system, and model for cultural geology

    Science.gov (United States)

    Mitchell, Lloyd W., III

    The concept for this study is based upon a personal interest by the author, an American Indian, in promoting cultural perspectives in undergraduate college teaching and learning environments. Most academicians recognize that merged fields can enhance undergraduate curricula. However, conflict may occur when instructors attempt to merge social science fields such as history or philosophy with geoscience fields such as mining and geomorphology. For example, ideologies of Earth structures derived from scientific methodologies may conflict with historical and spiritual understandings of Earth structures held by American Indians. Specifically, this study addresses the problem of how to combine cultural studies with the geosciences into a new merged academic discipline called cultural geology. This study further attempts to develop the merged field of cultural geology using an approach consisting of three research foci: a definition, a classification system, and a model. Literature reviews were conducted for all three foci. Additionally, to better understand merged fields, a literature review was conducted specifically for academic fields that merged social and physical sciences. Methodologies concentrated on the three research foci: definition, classification system, and model. The definition was derived via a two-step process. The first step, developing keyword hierarchical ranking structures, was followed by creating and analyzing semantic word meaning lists. The classification system was developed by reviewing 102 classification systems and incorporating selected components into a system framework. The cultural geology model was created also utilizing a two-step process. A literature review of scientific models was conducted. Then, the definition and classification system were incorporated into a model felt to reflect the realm of cultural geology. A course syllabus was then developed that incorporated the resulting definition, classification system, and model. This

  14. Space Station data system analysis/architecture study. Task 1: Functional requirements definition, DR-5

    Science.gov (United States)

    1985-01-01

    The initial task in the Space Station Data System (SSDS) Analysis/Architecture Study is the definition of the functional and key performance requirements for the SSDS. The SSDS is the set of hardware and software, both on the ground and in space, that provides the basic data management services for Space Station customers and systems. The primary purpose of the requirements development activity was to provide a coordinated, documented requirements set as a basis for the system definition of the SSDS and for other subsequent study activities. These requirements should also prove useful to other Space Station activities in that they provide an indication of the scope of the information services and systems that will be needed in the Space Station program. The major results of the requirements development task are as follows: (1) identification of a conceptual topology and architecture for the end-to-end Space Station Information Systems (SSIS); (2) development of a complete set of functional requirements and design drivers for the SSIS; (3) development of functional requirements and key performance requirements for the Space Station Data System (SSDS); and (4) definition of an operating concept for the SSIS. The operating concept was developed both from a Space Station payload customer and operator perspective in order to allow a requirements practicality assessment.

  15. Definition of a prospective payment system to reimburse emergency departments.

    Science.gov (United States)

    Levaggi, Rosella; Montefiori, Marcello

    2013-10-11

    Payers are increasingly turning to Prospective Payment Systems (PPSs) because they incentivize efficiency, but their application to emergency departments (EDs) is difficult because of the high level of uncertainty and variability in the cost of treating each patient.To the best of our knowledge, our work represents the first attempt at defining a PPS for this part of hospital activity. Data were specifically collected for this study and relate to 1011 patients who were triaged at an ED of a major Italian hospital, during 1 week in December 2010.The cost for each patient was analytically estimated by adding up several components: 1) physician and other staff costs that were imputed on the basis of the time each physician claimed to have spent treating the patient; 2) the cost for each test/treatment each patient actually underwent; 3) overhead costs, shared among patients using the time elapsed between first examination and discharge from the ED. The distribution of costs by triage code shows that, although the average cost increases across the four triage groups, the variance within each code is quite high. The maximum cost for a yellow code is €1074.7, compared with €680 for red, the most serious code. Using cluster analysis, the red code cluster is enveloped by yellow, and their costs are therefore indistinguishable, while green codes span all cost groups. This suggests that triage code alone is not a good proxy for the patient cost, and that other cost drivers need to be included. Crude triage codes cannot be used to define PPSs because they are not sufficiently correlated with costs and are characterized by large variances. However, if combined with other information, such as the number of laboratory and non-laboratory tests/examinations, it is possible to define cost groups that are sufficiently homogeneous to be reimbursed prospectively. This should discourage strategic behavior and allow the ED to break even or create profits, which can be reinvested to

  16. May the Soul of the IFS Financial System Definition RIP in Developing Countries

    Directory of Open Access Journals (Sweden)

    Simplice A. Asongu

    2015-03-01

    Full Text Available In this paper, we dissect with great acuteness contemporary insufficiencies of the IFS (2008 definition of the financial system and conclude from sound theoretical underpinnings and empirical justifications that the foundation, on which it is based, while solid for developed countries, holds less ground in developing countries. Perhaps one of the deepest empirical hollows in the financial development literature has been the equation of financial depth in the perspective of money supply to liquid liabilities. This equation has put on the margin (and skewed burgeoning phenomena of mobile banking, knowledge economy (KE, inequality…etc. We conclude that the informal financial sector, a previously missing component in the IFS conception and definition of the financial system can only be marginalized at the cost of misunderstanding recent burgeoning trends in mobile phone penetration, KE and poverty. Hence, the IFS definition has incontrovertibly fought its final dead battle and lost in the face of soaring trends highlighted above. Despite the plethora of econometric and policy-making sins the definition has committed in developing countries through bias estimates and misleading inferences, may its soul RIP.

  17. Research and Design on a Product Data Definition System of Semiconductor Packaging Industry

    Science.gov (United States)

    Shi, Jinfei; Ma, Qingyao; Zhou, Yifan; Chen, Ruwen

    2017-12-01

    This paper develops a product data definition (PDD) system for a semiconductor packaging and testing company with independent intellectual property rights. The new PDD system can solve the problems such as, the effective control of production plans, the timely feedback of production processes, and the efficient schedule of resources. Firstly, this paper introduces the general requirements of the PDD system and depicts the operation flow and the data flow of the PDD system. Secondly, the overall design scheme of the PDD system is put forward. After that, the physical data model is developed using the Power Designer15.0 tool, and the database system is built. Finally, the function realization and running effects of the PDD system are analysed. The successful operation of the PDD system can realize the information flow among various production departments of the enterprise to meet the standard of the enterprise manufacturing integration and improve the efficiency of production management.

  18. Conceptual definition of a technology development mission for advanced solar dynamic power systems

    Science.gov (United States)

    Migra, R. P.

    1986-01-01

    An initial conceptual definition of a technology development mission for advanced solar dynamic power systems is provided, utilizing a space station to provide a dedicated test facility. The advanced power systems considered included Brayton, Stirling, and liquid metal Rankine systems operating in the temperature range of 1040 to 1400 K. The critical technologies for advanced systems were identified by reviewing the current state of the art of solar dynamic power systems. The experimental requirements were determined by planning a system test of a 20 kWe solar dynamic power system on the space station test facility. These requirements were documented via the Mission Requirements Working Group (MRWG) and Technology Development Advocacy Group (TDAG) forms. Various concepts or considerations of advanced concepts are discussed. A preliminary evolutionary plan for this technology development mission was prepared.

  19. Evaluation of the Components of the North Carolina Syndromic Surveillance System Heat Syndrome Case Definition.

    Science.gov (United States)

    Harduar Morano, Laurel; Waller, Anna E

    To improve heat-related illness surveillance, we evaluated and refined North Carolina's heat syndrome case definition. We analyzed North Carolina emergency department (ED) visits during 2012-2014. We evaluated the current heat syndrome case definition (ie, keywords in chief complaint/triage notes or International Classification of Diseases, Ninth Revision, Clinical Modification [ ICD-9-CM] codes) and additional heat-related inclusion and exclusion keywords. We calculated the positive predictive value and sensitivity of keyword-identified ED visits and manually reviewed ED visits to identify true positives and false positives. The current heat syndrome case definition identified 8928 ED visits; additional inclusion keywords identified another 598 ED visits. Of 4006 keyword-identified ED visits, 3216 (80.3%) were captured by 4 phrases: "heat ex" (n = 1674, 41.8%), "overheat" (n = 646, 16.1%), "too hot" (n = 594, 14.8%), and "heatstroke" (n = 302, 7.5%). Among the 267 ED visits identified by keyword only, a burn diagnosis or the following keywords resulted in a false-positive rate >95%: "burn," "grease," "liquid," "oil," "radiator," "antifreeze," "hot tub," "hot spring," and "sauna." After applying the revised inclusion and exclusion criteria, we identified 9132 heat-related ED visits: 2157 by keyword only, 5493 by ICD-9-CM code only, and 1482 by both (sensitivity = 27.0%, positive predictive value = 40.7%). Cases identified by keywords were strongly correlated with cases identified by ICD-9-CM codes (rho = .94, P definition through the use of additional inclusion and exclusion criteria substantially improved the accuracy of the surveillance system. Other jurisdictions may benefit from refining their heat syndrome case definition.

  20. Effect of an 8K ultra-high-definition television system in a case of laparoscopic gynecologic surgery.

    Science.gov (United States)

    Aoki, Yoichi; Matsuura, Masahiko; Chiba, Toshio; Yamashita, Hiromasa

    2017-09-01

    Various endoscopic devices have been developed for advanced minimally invasive surgery. We recently applied a new 8K ultra-high-definition television system during laparoscopic treatment of endometriosis. The procedure, which is described in detail, stands as the first reported application of an 8K ultra-high-definition system for laparoscopic gynecologic surgery. Comparison is made between depiction of the lesion by the new system and depiction by a full high-definition system. Improved diagnostic accuracy resulted from the increased image resolution, and we believe that this and other advantages will lead to widespread acceptance and further application of 8K ultra-high-definition systems in the field of gynecologic surgery.

  1. Basic Definitions and Concepts of Systems Approach, Mathematical Modeling and Information Technologies in Sports Science

    Directory of Open Access Journals (Sweden)

    А. Лопатьєв

    2017-09-01

    Full Text Available The objective is to systematize and adapt the basic definitions and concepts of the systems approach, mathematical modeling and information technologies to sports science. Materials and methods. The research has studied the availability of appropriate terms in shooting sports, which would meet the requirements of modern sports science. It has examined the compliance of the shooting sports training program for children and youth sports schools, the Olympic reserve specialized children and youth schools, schools of higher sports skills, and sports educational institutions with the modern requirements and principles. Research results. The paper suggests the basic definitions adapted to the requirements of technical sports and sports science. The research has thoroughly analyzed the shooting sports training program for children and youth sports schools, the Olympic reserve specialized children and youth schools, schools of higher sports skills, and sports educational institutions. The paper offers options to improve the training program in accordance with the modern tendencies of training athletes.  Conclusions. The research suggests to systematize and adapt the basic definitions and concepts of the systems approach, mathematical modeling and information technologies using the example of technical sports.

  2. Nuclear Facility Isotopic Content (NFIC) Waste Management System to provide input for safety envelope definition

    International Nuclear Information System (INIS)

    Genser, J.R.

    1992-01-01

    The Westinghouse Savannah River Company (WSRC) is aggressively applying environmental remediation and radioactive waste management activities at the US Department of Energy's Savannah River Site (SRS) to ensure compliance with today's challenging governmental laws and regulatory requirements. This report discusses a computer-based Nuclear Facility Isotopic Content (NFIC) Waste Management System developed to provide input for the safety envelope definition and assessment of site-wide facilities. Information was formulated describing the SRS ''Nuclear Facilities'' and their respective bounding inventories of nuclear materials and radioactive waste using the NFIC Waste Management System

  3. Definition of Strong Equality of Tautologies and Universal System for Various Propositional Logics

    Directory of Open Access Journals (Sweden)

    Anahit Chubaryan

    2008-10-01

    Full Text Available Earlier we have introduced a definition of strong equality of classical tautologies, according to which two tautologies are equal iff they have the same hardness. The strong equality implies well known equality, but not vice versa. The strong equality is based on the notion of determinitive conjunct, using of which some new deduction system for classical propositional logic were defined. Here the notions of strong equality of tautologies for various logics are suggested and the idea of construction of universal deduction system for various propositional logics is given.

  4. Application of the 2012 revised diagnostic definitions for paediatric multiple sclerosis and immune-mediated central nervous system demyelination disorders

    NARCIS (Netherlands)

    van Pelt, E. Danielle; Neuteboom, Rinze F.; Ketelslegers, Immy A.; Boon, Maartje; Catsman-Berrevoets, Coriene E.; Hintzen, Rogier Q.

    Background Recently, the International Paediatric Multiple Sclerosis Study Group (IPMSSG) definitions for the diagnosis of immune-mediated acquired demyelinating syndromes (ADS) of the central nervous system, including paediatric multiple sclerosis (MS), have been revised. Objective To evaluate the

  5. Memory handling in the ATLAS submission system from job definition to sites limits

    CERN Document Server

    Forti, Alessandra; The ATLAS collaboration

    2016-01-01

    The ATLAS workload management system is a pilot system based on a late binding philosophy that avoided for many years to pass fine grained job requirements to the batch system. In particular for memory most of the requirements were set to request 4GB vmem as defined in the EGI portal VO card, i.e. 2GB RAM + 2GB swap. However in the past few years several changes have happened in the operating system kernel and in the applications that make such a definition of memory to use for requesting slots obsolete and ATLAS has introduced the new PRODSYS2 workload management which has a more flexible system to evaluate the memory requirements and to submit to appropriate queues. The work stemmed in particular from the introduction of 64bit multicore workloads and the increased memory requirements of some of the single core applications. This paper describes the overall review and changes of memory handling starting from the definition of tasks, the way tasks memory requirements are set using scout jobs and the new memor...

  6. [Definition of polytrauma in the German DRG system 2006. Up to 30% "incorrect classifications"].

    Science.gov (United States)

    Flohé, S; Buschmann, C; Nabring, J; Merguet, P; Luetkes, P; Lefering, R; Nast-Kolb, D; Ruchholtz, S

    2007-07-01

    Severely injured patients represent a relevant financial cost factor in the health system especially for high level trauma centres. The introduction of a"diagnosis-related group" (DRG) system in Germany further revealed the potential negative economic impact of severely injured patients for trauma centres. In recent years several changes of the specific DRG for severely injured patients occurred with the aim of a convenient reimbursement for the trauma patient. The present study analysed 38 multiply injured patients admitted in the first half of the year 2004. These patients were analysed in terms of the respective DRG that was attributed to the patient on the basis of the definition criteria for 2004 and 2005. In addition for the same patient group the total inpatient treatment costs were calculated according to the algorithm developed by the Working Group on Polytrauma of the German Trauma Society. The analysis revealed three major problems in the reimbursement for severely injured patients according to the German DRG system: (1) In spite of the additional payment for blood compounds on top of the DRG reimbursement in 2005 a mean economic deficit of more than 4000 euro remains for each severely injured patient. (2) In 30% of the analysed trauma patients the combination of the diagnosis and operations did not lead to a specific polytrauma DRG or to an intensive care medicine DRG. (3) In the patients that could not be attributed to a polytrauma DRG, the economic deficit was with an average of more than 9000 euro even higher. This attribution aspect is also currently relevant, since the definition criteria for a polytrauma DRG were not changed in 2006 or 2007. We conclude that besides the recent changes in the reimbursement for polytrauma DRGs, which have been at least partly adapted to the real financial burden of these patients, the definition of a severely injured patient in the German DRG system may also need to be revised.

  7. Memory handling in the ATLAS submission system from job definition to sites limits

    Science.gov (United States)

    Forti, A. C.; Walker, R.; Maeno, T.; Love, P.; Rauschmayr, N.; Filipcic, A.; Di Girolamo, A.

    2017-10-01

    In the past few years the increased luminosity of the LHC, changes in the linux kernel and a move to a 64bit architecture have affected the ATLAS jobs memory usage and the ATLAS workload management system had to be adapted to be more flexible and pass memory parameters to the batch systems, which in the past wasn’t a necessity. This paper describes the steps required to add the capability to better handle memory requirements, included the review of how each component definition and parametrization of the memory is mapped to the other components, and what changes had to be applied to make the submission chain work. These changes go from the definition of tasks and the way tasks memory requirements are set using scout jobs, through the new memory tool developed to do that, to how these values are used by the submission component of the system and how the jobs are treated by the sites through the CEs, batch systems and ultimately the kernel.

  8. Memory handling in the ATLAS submission system from job definition to sites limits

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00027700; The ATLAS collaboration; Walker, Rodney; Maeno, Tadashi; Love, Peter; Rauschmayr, Nathalie; Filipcic, Andrej; Di Girolamo, Alessandro

    2017-01-01

    In the past few years the increased luminosity of the LHC, changes in the linux kernel and a move to a 64bit architecture have affected the ATLAS jobs memory usage and the ATLAS workload management system had to be adapted to be more flexible and pass memory parameters to the batch systems, which in the past wasn’t a necessity. This paper describes the steps required to add the capability to better handle memory requirements, included the review of how each component definition and parametrization of the memory is mapped to the other components, and what changes had to be applied to make the submission chain work. These changes go from the definition of tasks and the way tasks memory requirements are set using scout jobs, through the new memory tool developed to do that, to how these values are used by the submission component of the system and how the jobs are treated by the sites through the CEs, batch systems and ultimately the kernel.

  9. Scope Definition

    DEFF Research Database (Denmark)

    Bjørn, Anders; Owsianiak, Mikołaj; Laurent, Alexis

    2018-01-01

    The scope definition is the second phase of an LCA. It determines what product systems are to be assessed and how this assessment should take place. This chapter teaches how to perform a scope definition. First, important terminology and key concepts of LCA are introduced. Then, the nine items...... making up a scope definition are elaborately explained: (1) Deliverables. (2) Object of assessment, (3) LCI modelling framework and handling of multifunctional processes, (4) System boundaries and completeness requirements, (5) Representativeness of LCI data, (6) Preparing the basis for the impact...... assessment, (7) Special requirements for system comparisons, (8) Critical review needs and (9) Planning reporting of results. The instructions relate both to the performance and reporting of a scope definition and are largely based on ILCD....

  10. Cementing the foundations of thermodynamics: Comparison of system-based and surroundings-based definitions of work and heat

    International Nuclear Information System (INIS)

    Gislason, Eric A.; Craig, Norman C.

    2005-01-01

    The distinction between system-based and surroundings-based definitions of thermodynamic heat (q) and work (w), particularly pressure-volume work, in irreversible processes is introduced and cleanly drawn. A systematic presentation of system-based q and w is given for the first time. This development complements the authors' earlier presentation of surroundings-based work and heat. Either set of definitions can and has been used to develop the laws of thermodynamics. Both sets of definitions are used to analyze examples presented by Kivelson and Oppenheim (KO). It is seen for two KO processes that w(sys-based) and w(surr-based) are not equal. This not uncommon result does not violate the first law because the two q values are also different. One of the KO examples corresponds to a 'quasistatic' process, which is reversible from the point of view of the system but not from the point of view of the system plus surroundings taken together, and, therefore, not reversible overall. A number of reasons are given for preferring surroundings-based definitions of w and q to system-based definitions. Perhaps the most important is the fact that w(sys-based) does not always satisfy the theorem of maximum work in a constant temperature process. Finally, an explanation is presented for why the common use of two different sets of definitions for w and q has not led to greater confusion in the past

  11. High-definition resolution three-dimensional imaging systems in laparoscopic radical prostatectomy: randomized comparative study with high-definition resolution two-dimensional systems.

    Science.gov (United States)

    Kinoshita, Hidefumi; Nakagawa, Ken; Usui, Yukio; Iwamura, Masatsugu; Ito, Akihiro; Miyajima, Akira; Hoshi, Akio; Arai, Yoichi; Baba, Shiro; Matsuda, Tadashi

    2015-08-01

    Three-dimensional (3D) imaging systems have been introduced worldwide for surgical instrumentation. A difficulty of laparoscopic surgery involves converting two-dimensional (2D) images into 3D images and depth perception rearrangement. 3D imaging may remove the need for depth perception rearrangement and therefore have clinical benefits. We conducted a multicenter, open-label, randomized trial to compare the surgical outcome of 3D-high-definition (HD) resolution and 2D-HD imaging in laparoscopic radical prostatectomy (LRP), in order to determine whether an LRP under HD resolution 3D imaging is superior to that under HD resolution 2D imaging in perioperative outcome, feasibility, and fatigue. One-hundred twenty-two patients were randomly assigned to a 2D or 3D group. The primary outcome was time to perform vesicourethral anastomosis (VUA), which is technically demanding and may include a number of technical difficulties considered in laparoscopic surgeries. VUA time was not significantly shorter in the 3D group (26.7 min, mean) compared with the 2D group (30.1 min, mean) (p = 0.11, Student's t test). However, experienced surgeons and 3D-HD imaging were independent predictors for shorter VUA times (p = 0.000, p = 0.014, multivariate logistic regression analysis). Total pneumoperitoneum time was not different. No conversion case from 3D to 2D or LRP to open RP was observed. Fatigue was evaluated by a simulation sickness questionnaire and critical flicker frequency. Results were not different between the two groups. Subjective feasibility and satisfaction scores were significantly higher in the 3D group. Using a 3D imaging system in LRP may have only limited advantages in decreasing operation times over 2D imaging systems. However, the 3D system increased surgical feasibility and decreased surgeons' effort levels without inducing significant fatigue.

  12. RMS Current of a Photovoltaic Generator in Grid-Connected PV Systems: Definition and Application

    Directory of Open Access Journals (Sweden)

    P. J. Pérez

    2008-01-01

    Full Text Available This paper includes a definition of a new and original concept in the photovoltaic field, RMS current of a photovoltaic generator for grid-connected systems. The RMS current is very useful for calculating energy losses in cables used in a PV generator. As well, a current factor has been defined in order to simplify RMS current calculation. This factor provides an immediate (quick and easy calculation method for the RMS current that does not depend on the case particular conditions (orientation, location, etc.. RMS current and current factor values have been calculated for different locations and modules.

  13. Systems Analysis, Scenario Construction and Consequence Analysis Definition for SITE-94

    Energy Technology Data Exchange (ETDEWEB)

    Chapman, N A; Robinson, P [Intera Information Technologies Ltd (United Kingdom); Andersson, Johan; Wingefors, S [Swedish Nuclear Power Inspectorate, Stockholm (Sweden); Skagius, K; Wiborgh, M [Kemakta Konsult AB, Stockholm (Sweden); Wene, C O [Chalmers Inst. of Technology, Goeteborg (Sweden)

    1995-06-01

    SITE-94 is a performance assessment of a hypothetical repository at a real site. The main objective of the project is to determine how site specific data should be assimilated into the performance assessment process and to evaluate how uncertainties inherent in site characterization will influence performance assessment results. This report uses scenario definition work as a vehicle to introduce the systems approach to performance assessment which has been developed and tested in SITE-94 and which constitutes one of the main advances made during the project. The results of the application of the methodology are presented separately, in the SITE-94 Summary Report. 40 refs, 21 figs, 12 tabs.

  14. Systems Analysis, Scenario Construction and Consequence Analysis Definition for SITE-94

    International Nuclear Information System (INIS)

    Chapman, N.A.; Robinson, P.; Andersson, Johan; Wingefors, S.; Skagius, K.; Wiborgh, M.; Wene, C.O.

    1995-06-01

    SITE-94 is a performance assessment of a hypothetical repository at a real site. The main objective of the project is to determine how site specific data should be assimilated into the performance assessment process and to evaluate how uncertainties inherent in site characterization will influence performance assessment results. This report uses scenario definition work as a vehicle to introduce the systems approach to performance assessment which has been developed and tested in SITE-94 and which constitutes one of the main advances made during the project. The results of the application of the methodology are presented separately, in the SITE-94 Summary Report. 40 refs, 21 figs, 12 tabs

  15. Splitting of the rate matrix as a definition of time reversal in master equation systems

    International Nuclear Information System (INIS)

    Liu Fei; Le, Hong

    2012-01-01

    Motivated by recent progress in nonequilibrium fluctuation relations, we present a generalized time reversal for stochastic master equation systems with discrete states, which is defined as a splitting of the rate matrix into irreversible and reversible parts. An immediate advantage of this definition is that a variety of fluctuation relations can be attributed to different matrix splittings. Additionally, we find that the accustomed total entropy production formula and conditions of the detailed balance must be modified appropriately to account for the reversible rate part, which was previously ignored. (paper)

  16. The development of an algebraic multigrid algorithm for symmetric positive definite linear systems

    Energy Technology Data Exchange (ETDEWEB)

    Vanek, P.; Mandel, J.; Brezina, M. [Univ. of Colorado, Denver, CO (United States)

    1996-12-31

    An algebraic multigrid algorithm for symmetric, positive definite linear systems is developed based on the concept of prolongation by smoothed aggregation. Coarse levels are generated automatically. We present a set of requirements motivated heuristically by a convergence theory. The algorithm then attempts to satisfy the requirements. Input to the method are the coefficient matrix and zero energy modes, which are determined from nodal coordinates and knowledge of the differential equation. Efficiency of the resulting algorithm is demonstrated by computational results on real world problems from solid elasticity, plate blending, and shells.

  17. A Formal Definition for Expert Systems used in Real-time Applications

    Directory of Open Access Journals (Sweden)

    Vasile MAZILESCU

    2015-05-01

    Full Text Available The present paper is situated on the grounds of research in the field of symbolic Artificial Intelligence systems, applied to the new Knowledge Management Systems. The basic feature of these systems is represented by the processing of the fuzzy knowledge involved in the synthesis of some decisions. The work reported in this paper serves to promote an Intelligent System that can operate in dynamic and uncertain environments based on a formal definition of an expert system. We can develop and justify thus a series of modelling and design techniques for Intelligent Knowledge Management Systems (IKMS, as well as methods for the analysis of expert systems performance, and, of a fuzzy expert system in particular, between which there are strong similarities. We will also outline a number of differences between conventional problem solving systems and IKMS, the links between expert systems and those of structural and functional planning, the analogy between the model of the problem or business process and the problem domain.

  18. Systems resilience for multihazard environments: definition, metrics, and valuation for decision making.

    Science.gov (United States)

    Ayyub, Bilal M

    2014-02-01

    The United Nations Office for Disaster Risk Reduction reported that the 2011 natural disasters, including the earthquake and tsunami that struck Japan, resulted in $366 billion in direct damages and 29,782 fatalities worldwide. Storms and floods accounted for up to 70% of the 302 natural disasters worldwide in 2011, with earthquakes producing the greatest number of fatalities. Average annual losses in the United States amount to about $55 billion. Enhancing community and system resilience could lead to massive savings through risk reduction and expeditious recovery. The rational management of such reduction and recovery is facilitated by an appropriate definition of resilience and associated metrics. In this article, a resilience definition is provided that meets a set of requirements with clear relationships to the metrics of the relevant abstract notions of reliability and risk. Those metrics also meet logically consistent requirements drawn from measure theory, and provide a sound basis for the development of effective decision-making tools for multihazard environments. Improving the resiliency of a system to meet target levels requires the examination of system enhancement alternatives in economic terms, within a decision-making framework. Relevant decision analysis methods would typically require the examination of resilience based on its valuation by society at large. The article provides methods for valuation and benefit-cost analysis based on concepts from risk analysis and management. © 2013 Society for Risk Analysis.

  19. Utilization Possibilities of Area Definition in User Space for User-Centric Pervasive-Adaptive Systems

    Science.gov (United States)

    Krejcar, Ondrej

    The ability to let a mobile device determine its location in an indoor environment supports the creation of a new range of mobile information system applications. The goal of my project is to complement the data networking capabilities of RF wireless LANs with accurate user location and tracking capabilities for user needed data prebuffering. I created a location based system enhancement for locating and tracking users of indoor information system. User position is used for data prebuffering and pushing information from a server to his mobile client. All server data is saved as artifacts (together) with its indoor position information. The area definition for artifacts selecting is described for current and predicted user position along with valuating options for artifacts ranging. Future trends are also discussed.

  20. Preliminary definition of the DOE/OCRWM transportation operating system: Final report

    International Nuclear Information System (INIS)

    Rawl, R.R.; Kline, S.C.

    1988-01-01

    This paper is based on the report ''Preliminary Definition of the Transportation Operations System'' and presents a summary of the preliminary definition of transportation operations activities for the cask shipment cycle, commencing with the dispatch of an empty cask, to loading and unloading of cask contents, and preparation of the empty cask for redispatch. It first presents a high-level description of the transportation cycle and then further describes each of the major activities in greater detail. For simplicity of presentation, the highway mode of transport is most often used to describe activities. The reader should keep in mind that the use of other modes will slightly alter the activities and possibly the sequences. Major activities and functions of the system are organized into a first cut of how they could be allocated to specific facilities. The reader should keep in mind that the assignment of functions and the aggregation of these into specific facilities are tasks which have yet to be performed. This paper simply presents a first look at possible groupings of the functions on a facility basis. 12 figs

  1. On the formal definition of the systems' interoperability capability: an anthropomorphic approach

    Science.gov (United States)

    Zdravković, Milan; Luis-Ferreira, Fernando; Jardim-Goncalves, Ricardo; Trajanović, Miroslav

    2017-03-01

    The extended view of enterprise information systems in the Internet of Things (IoT) introduces additional complexity to the interoperability problems. In response to this, the problem of systems' interoperability is revisited by taking into the account the different aspects of philosophy, psychology, linguistics and artificial intelligence, namely by analysing the potential analogies between the processes of human and system communication. Then, the capability to interoperate as a property of the system, is defined as a complex ability to seamlessly sense and perceive a stimulus from its environment (assumingly, a message from any other system), make an informed decision about this perception and consequently, articulate a meaningful and useful action or response, based on this decision. Although this capability is defined on the basis of the existing interoperability theories, the proposed approach to its definition excludes the assumption on the awareness of co-existence of two interoperating systems. Thus, it establishes the links between the research of interoperability of systems and intelligent software agents, as one of the systems' digital identities.

  2. On the definition of exergy efficiencies for petroleum systems: Application to offshore oil and gas processing

    International Nuclear Information System (INIS)

    Nguyen, Tuong-Van; Voldsund, Mari; Elmegaard, Brian; Ertesvåg, Ivar Ståle; Kjelstrup, Signe

    2014-01-01

    Exergy-based efficiencies are measures of the thermodynamic perfection of systems and processes. A meaningful formulation of these performance criteria for petroleum systems is difficult because of (i) the high chemical exergy of hydrocarbons, (ii) the large variety of chemical components, and (iii) the differences in operating conditions between facilities. This work focuses on offshore processing plants, considering four oil platforms that differ by their working conditions and designs. Several approaches from the scientific literature for similar processes are presented and applied to the four cases. They showed a low sensitivity to performance improvements, gave inconsistent results, or favoured facilities operating under certain conditions. We suggest an alternative formulation, called the component-by-component exergy efficiency, which builds on the decomposition of the exergy flows at the level of the chemical compounds. It allows therefore for sound comparisons of separation systems, while it successfully evaluates their theoretical improvement potentials. The platform displaying the lowest efficiency (1.7%) is characterised by little pumping and compression works, at the opposite of the one displaying the highest performance (29.6%). A more realistic measure of the technical potential for improving these systems can be carried out by splitting further the exergy destruction into its avoidable and unavoidable parts. - Highlights: • Different exergy efficiency definitions for petroleum systems are reviewed. • These definitions are applied to four oil and gas platforms and are revealed to be inapplicable. • A new formulation, namely the component-by-component efficiency, is proposed. • The performance of the offshore platforms under study varies between 1.7% and 29.6%

  3. Inter-Event Time Definition Setting Procedure for Urban Drainage Systems

    Directory of Open Access Journals (Sweden)

    Jingul Joo

    2013-12-01

    Full Text Available Traditional inter-event time definition (IETD estimate methodologies generally take into account only rainfall characteristics and not drainage basin characteristics. Therefore, they may not succeed in providing an appropriate value of IETD for any sort of application to the design of urban drainage system devices. To overcome this limitation, this study presents a method of IETD determination that considers basin characteristics. The suggested definition of IETD is the time period from the end of a rainfall event to the end of a direct runoff. The suggested method can identify the independent events that are suitable for the statistical analysis of the recorded rainfall. Using the suggested IETD, the IETD of the Joong-Rang drainage system was determined and the area-IETD relation curve was drawn. The resulting regression curve can be used to determinate the IETD of ungauged urban drainage systems, with areas ranging between 40 and 4400 ha. Using the regression curve, the IETDs and time distribution of the design rainfall for four drainage systems in Korea were determined and rainfall-runoff simulations were performed with the Storm Water Management Model (SWMM. The results were compared with those from Huff's method which assumed a six-hour IETD. The peak flow rates obtained by the suggested method were 11%~15% greater than those obtained by Huff’s method. The suggested IETD determination method can identify independent events that are suitable for the statistical analysis of the recorded rainfall aimed at the design of urban drainage system devices.

  4. Realizing the increased potential of an open-system high-definition digital projector design

    Science.gov (United States)

    Daniels, Reginald

    1999-05-01

    Modern video projectors are becoming more compact and capable. Various display technologies are very competitive and are delivering higher performance and more compact projectors to market at an ever quickening pace. However the end users are often left with the daunting task of integrating the 'off the self projectors' into a previously existing system. As the projectors become more digitally enhanced, there will be a series of designs, and the digital projector technology matures. The design solutions will be restricted by the state of the art at the time of manufacturing. In order to allow the most growth and performance for a given price, many design decisions will be made and revisited over a period of years or decades. A modular open digital system design concept is indeed a major challenge of the future high definition digital displays for al applications.

  5. Efficient high-throughput biological process characterization: Definitive screening design with the ambr250 bioreactor system.

    Science.gov (United States)

    Tai, Mitchell; Ly, Amanda; Leung, Inne; Nayar, Gautam

    2015-01-01

    The burgeoning pipeline for new biologic drugs has increased the need for high-throughput process characterization to efficiently use process development resources. Breakthroughs in highly automated and parallelized upstream process development have led to technologies such as the 250-mL automated mini bioreactor (ambr250™) system. Furthermore, developments in modern design of experiments (DoE) have promoted the use of definitive screening design (DSD) as an efficient method to combine factor screening and characterization. Here we utilize the 24-bioreactor ambr250™ system with 10-factor DSD to demonstrate a systematic experimental workflow to efficiently characterize an Escherichia coli (E. coli) fermentation process for recombinant protein production. The generated process model is further validated by laboratory-scale experiments and shows how the strategy is useful for quality by design (QbD) approaches to control strategies for late-stage characterization. © 2015 American Institute of Chemical Engineers.

  6. Process and system - A dual definition, revisited with consequences in metrology

    Science.gov (United States)

    Ruhm, K. H.

    2010-07-01

    Lets assert that metrology life could be easier scientifically as well as technologically, if we, intentionally, would make an explicit distinction between two outstanding domains, namely the given, really existent domain of processes and the just virtually existent domain of systems, the latter of which is designed and used by the human mind. The abstract domain of models, by which we map the manifold reality of processes, is itself part of the domain of systems. Models support comprehension and communication, although they are normally extreme simplifications of properties and behaviour of a concrete reality. So, systems and signals represent processes and quantities, which are described by means of Signal and System Theory as well as by Stochastics and Statistics. The following presentation of this new, demanding and somehow irritating definition of the terms process and system as a dual pair is unusual indeed, but it opens the door widely to a better and more consistent discussion and understanding of manifold scientific tools in many areas. Metrology [4] is one of the important fields of concern due to many reasons: One group of the soft and hard links between the domain of processes and the domain of systems is realised by concepts of measurement science on the one hand and by instrumental tools of measurement technology on the other hand.

  7. Performance of the definitions of the systemic inflammatory response syndrome and sepsis in neonates.

    Science.gov (United States)

    Hofer, Nora; Zacharias, Eva; Müller, Wilhelm; Resch, Bernhard

    2012-09-01

    The aim of this study was to examine the applicability of the definitions of the systemic inflammatory response syndrome (SIRS) and sepsis to neonates during the first 3 days of life. This is a retrospective study of all term neonates hospitalized within the first 24 h of life from 2004 to 2010 at our neonatal intensive care unit. Of 476 neonates, 30 (6 %) had a diagnosis of culture-proven early-onset sepsis (EOS) and 81 (17 %) had culture-negative clinical EOS or suspected EOS. SIRS and sepsis criteria were applied to 116 (24 %) and 61 (13 %) neonates, respectively. Of 30 neonates with culture proven, EOS 14 (53 %) fulfilled SIRS and sepsis criteria. The single diagnostic criterion of SIRS applied to 20 % (hypothermia or fever), 43 % (white blood cell count/immature-to-total neutrophil ratio), 87 % (respiratory symptoms), and 33 % (cardiocirculatory symptoms) of all neonates with culture-proven EOS. The definitions of SIRS and sepsis did not apply to about half of all cases of culture-proven EOS. An evidence-based approach to find the appropriate criteria for defining EOS in the neonate is needed.

  8. A lateral chromatic aberration correction system for ultrahigh-definition color video camera

    Science.gov (United States)

    Yamashita, Takayuki; Shimamoto, Hiroshi; Funatsu, Ryohei; Mitani, Kohji; Nojiri, Yuji

    2006-02-01

    We have developed color camera for an 8k x 4k-pixel ultrahigh-definition video system, which is called Super Hi- Vision, with a 5x zoom lens and a signal-processing system incorporating a function for real-time lateral chromatic aberration correction. The chromatic aberration of the lens degrades color image resolution. So in order to develop a compact zoom lens consistent with ultrahigh-resolution characteristics, we incorporated a real-time correction function in the signal-processing system. The signal-processing system has eight memory tables to store the correction data at eight focal length points on the blue and red channels. When the focal length data is inputted from the lens control units, the relevant correction data are interpolated from two of eights correction data tables. This system performs geometrical conversion on both channels using this correction data. This paper describes that the correction function can successfully reduce the lateral chromatic aberration, to an amount small enough to ensure the desired image resolution was achieved over the entire range of the lens in real time.

  9. Systems biology definition of the core proteome of metabolism and expression is consistent with high-throughput data

    DEFF Research Database (Denmark)

    Yang, Laurence; Tan, Justin; O'Brien, Edward J.

    2015-01-01

    based on proteomics data. This systems biology core proteome includes 212 genes not found in previous comparative genomics-based core proteome definitions, accounts for 65% of known essential genes in E. coli, and has 78% gene function overlap with minimal genomes (Buchnera aphidicola and Mycoplasma......Finding the minimal set of gene functions needed to sustain life is of both fundamental and practical importance. Minimal gene lists have been proposed by using comparative genomics-based core proteome definitions. A definition of a core proteome that is supported by empirical data, is understood...... at the systems-level, and provides a basis for computing essential cell functions is lacking. Here, we use a systems biology-based genome-scale model of metabolism and expression to define a functional core proteome consisting of 356 gene products, accounting for 44% of the Escherichia coli proteome by mass...

  10. Satellite Power Systems (SPS) concept definition study, exhibit C. Volume 2, part 2: System engineering, cost and programmatics

    Science.gov (United States)

    Hanley, G. M.

    1979-01-01

    Volume 2, Part 2, of a seven volume Satellite Power Systems (SPS) report is presented. Part 2 covers cost and programmatics and is divided into four sections. The first section gives illustrations of the SPS reference satellite and rectenna concept, and an overall scenario for SPS space transportation involvement. The second section presents SPS program plans for the implementation of PHASE C/D activities. These plans describe SPS program schedules and networks, critical items of systems evolution/technology development, and the natural resources analysis. The fourth section presents summary comments on the methods and rationale followed in arriving at the results documented. Suggestions are also provided in those areas where further analysis or evaluation will enhance SPS cost and programmatic definitions.

  11. System concept definition of the Grumman superconducting Electromagnetic Suspension (EMS) Maglev design

    Science.gov (United States)

    Proise, M.

    1994-01-01

    Grumman, under contract to the Army Corps of Engineers, completed a System Concept Definition (SCD) study to design a high-speed 134 m/s (300 m.p.h.) magnetically levitated (Maglev) transportation system. The primary development goals were to design a Maglev that is safe, reliable, environmentally acceptable, and low-cost. The cost issue was a predominant one, since previous studies have shown that an economically viable Maglev system (one that is attractive to investors for future models of passenger and/or freight transportation) requires a cost that is about $12.4 M/km ($20 Million per mile). The design is based on the electromagnetic suspension (EMS) system using superconducting iron-core magnets mounted along both sides of the vehicle. The EMS system has several advantages compared to the electrodynamic suspension (EDS) Maglev systems such as low stray magnetic fields in the passenger cabin and the surrounding areas, uniform load distribution along the full length of the vehicle, and small pole pitch for smoother propulsion and ride comfort. It is also levitated at all speeds and incorporates a wrap-around design of safer operation. The Grumman design has all the advantages of an EMS system identified above, while eliminating (or significantly improving) drawbacks associated with normal magnet powered EMS systems. Improvements include larger gap clearance, lighter weight, lower number of control servos, and higher off line switching speeds. The design also incorporates vehicle tilt (plus or minus 9 deg) for higher coordinated turn and turn out speed capability.

  12. The Analysis of Height System Definition and the High Precision GNSS Replacing Leveling Method

    Directory of Open Access Journals (Sweden)

    ZHANG Chuanyin

    2017-08-01

    Full Text Available Based on the definition of height system, the gravitational equipotential property of height datum surface is discussed in this paper, differences of the heights at ground points that defined in different height systems are tested and analyzed as well. A new method for replacing leveling using GNSS is proposed to ensure the consistency between GNSS replacing leveling and spirit leveling at mm accuracy level. The main conclusions include:①For determining normal height at centimeter accuracy level, the datum surface of normal height should be the geoid. The 1985 national height datum of China adopts normal height system, its datum surface is the geoid passing the Qingdao zero point.②The surface of equi-orthometric height in the near earth space is parallel to the geoid. The combination of GNSS precise positioning and geoid model can be directly used for orthometric height determination. However, the normal height system is more advantageous for describing the terrain and relief.③Based on the proposed method of GNSS replacing leveling, the errors in geodetic height affect more on normal height result than the errors of geoid model, the former is about 1.5 times of the latter.

  13. Theodolite Polar measurements system and definition of the grid-lines method

    Directory of Open Access Journals (Sweden)

    Andréa de Seixas

    2004-12-01

    Full Text Available The requirements of construction quality, mainly in the car and airplane industries, accelerate the development of new 3D-Measurement Systems and Measurement Processes that make possible the automatic object recording and it’s post-processing on the basis, for example, on deformations. The geometrical reconstruction of objects or surface requires a minimal number of points, which abstracts and will be fulfill through interpolation its exact form and quality of the object in each case. The applications of the laser for the active signalization of a point object in combination with the directional measurement make possible in such way the determination of objects or surfaces, including also, places where the use of artificial targets is dangerous or impossible. This work describes the development of such measurement system based on two measurement robots or a reflector-free measuring tachymeter. The system is capable of reaching the intersections points of a grid-line that is defined in an appropriate coordinate system. The aim of this paper is to present the development of measurement methods that can reconstruct unknown three-dimensional and not signalized objects. The existing deformation-measurement, based on Pointer Theodolite and a Video Theodolite Measurement System and the other reflector-free Tachymeter Measurement System in context with the problematic analysis of deformation will be presented. The grid-lines Methods appear a solution and stand as new alternative for the geometrical reconstruction of the object surfaces. Its definition and preparations in a suitable coordinate system are discussed in detail.

  14. NOSS/ALDCS analysis and system requirements definition. [national oceanic satellite system data collection

    Science.gov (United States)

    Reed, D. L.; Wallace, R. G.

    1981-01-01

    The results of system analyses and implementation studies of an advanced location and data collection system (ALDCS) , proposed for inclusion on the National Oceanic Satellite System (NOSS) spacecraft are reported. The system applies Doppler processing and radiofrequency interferometer position location technqiues both alone and in combination. Aspects analyzed include: the constraints imposed by random access to the system by platforms, the RF link parameters, geometric concepts of position and velocity estimation by the two techniques considered, and the effects of electrical measurement errors, spacecraft attitude errors, and geometric parameters on estimation accuracy. Hardware techniques and trade-offs for interferometric phase measurement, ambiguity resolution and calibration are considered. A combined Doppler-interferometer ALDCS intended to fulfill the NOSS data validation and oceanic research support mission is also described.

  15. Satellite Power Systems (SPS) concept definition study, exhibit C. Volume 2, part 1: System engineering

    Science.gov (United States)

    Hanley, G. M.

    1979-01-01

    Volume 2, Part 1, of a seven volume report is presented. Part 1 encompasses Satellite Power Systems (SPS) systems engineering aspects and is divided into three sections. The first section presents descriptions of the various candidate concepts considered and conclusions and recommendations for a preferred concept. The second section presents a summary of results of the various trade studies and analysis conducted during the course of the study. The third section describes the Photovoltaic Satellite Based Satellite Power System (SPS) Point Design as it was defined through studies performed during the period January 1977 through March 1979.

  16. The High-Level Interface Definitions in the ASTRI/CTA Mini Array Software System (MASS)

    Science.gov (United States)

    Conforti, V.; Tosti, G.; Schwarz, J.; Bruno, P.; Cefal‘A, M.; Paola, A. D.; Gianotti, F.; Grillo, A.; Russo, F.; Tanci, C.; Testa, V.; Antonelli, L. A.; Canestrari, R.; Catalano, O.; Fiorini, M.; Gallozzi, S.; Giro, E.; Palombara, N. L.; Leto, G.; Maccarone, M. C.; Pareschi, G.; Stringhetti, L.; Trifoglio, M.; Vercellone, S.; Astri Collaboration; Cta Consortium

    2015-09-01

    ASTRI (Astrofisica con Specchi a Tecnologia Replicante Italiana) is a Flagship Project funded by the Italian Ministry of Education, University and Research, and led by INAF, the Italian National Institute of Astrophysics. Within this framework, INAF is currently developing an end-to-end prototype, named ASTRI SST-2M, of a Small Size Dual-Mirror Telescope for the Cherenkov Telescope Array, CTA. A second goal of the project is the realization of the ASTRI/CTA mini-array, which will be composed of seven SST-2M telescopes placed at the CTA Southern Site. The ASTRI Mini Array Software System (MASS) is designed to support the ASTRI/CTA mini-array operations. MASS is being built on top of the ALMA Common Software (ACS) framework, which provides support for the implementation of distributed data acquisition and control systems, and functionality for log and alarm management, message driven communication and hardware devices management. The first version of the MASS system, which will comply with the CTA requirements and guidelines, will be tested on the ASTRI SST-2M prototype. In this contribution we present the interface definitions of the MASS high level components in charge of the ASTRI SST-2M observation scheduling, telescope control and monitoring, and data taking. Particular emphasis is given to their potential reuse for the ASTRI/CTA mini-array.

  17. High-Definition 3D Stereoscopic Microscope Display System for Biomedical Applications

    Directory of Open Access Journals (Sweden)

    Yoo Kwan-Hee

    2010-01-01

    Full Text Available Biomedical research has been performed by using advanced information techniques, and micro-high-quality stereo images have been used by researchers and/or doctors for various aims in biomedical research and surgery. To visualize the stereo images, many related devices have been developed. However, the devices are difficult to learn for junior doctors and demanding to supervise for experienced surgeons. In this paper, we describe the development of a high-definition (HD three-dimensional (3D stereoscopic imaging display system for operating a microscope or experimenting on animals. The system consists of a stereoscopic camera part, image processing device for stereoscopic video recording, and stereoscopic display. In order to reduce eyestrain and viewer fatigue, we use a preexisting stereo microscope structure and polarized-light stereoscopic display method that does not reduce the quality of the stereo images. The developed system can overcome the discomfort of the eye piece and eyestrain caused by use over a long period of time.

  18. The definition and treatment of scenarios in a probabilistic systems assessment

    Energy Technology Data Exchange (ETDEWEB)

    Andres, T.H.; Goodwin, B.W

    1998-03-01

    Concepts for the disposal of nuclear waste generally involve the use of multiple barriers, both man-made and natural, to isolate the waste from man's environment for very long periods of time. To assess the safety of these concepts, postclosure safety assessments are conducted to study the types, ranges and probabilities of potential impacts caused by wastes penetrating these barriers. Within the Canadian context, postclosure safety assessments must estimate radiological risk for comparison with regulatory criteria. The definition of radiological risk introduces a requirement to identify and then evaluate scenarios that describe quantitatively the possible behaviour of a disposal system and its surroundings for at least 10{sup 4} years. This report examines the connection between the identification and evaluation of scenarios. It shows how a large collection of factors can be combined to form simple scenarios, and how a large number of simple scenarios can be grouped into a manageably small number of compound scenarios. The compound scenarios, notably the 'central' scenario, can be evaluated using a probabilistic systems assessment code such as SYVAC3 (SYstems Variability Analysis Code, generation 3) to estimate the radiological risk and other environmental impacts. Examples are taken from a long-term performance assessment study to demonstrate a pragmatic application of the procedure. (author)

  19. The definition and treatment of scenarios in a probabilistic systems assessment

    International Nuclear Information System (INIS)

    Andres, T.H.; Goodwin, B.W.

    1998-03-01

    Concepts for the disposal of nuclear waste generally involve the use of multiple barriers, both man-made and natural, to isolate the waste from man's environment for very long periods of time. To assess the safety of these concepts, postclosure safety assessments are conducted to study the types, ranges and probabilities of potential impacts caused by wastes penetrating these barriers. Within the Canadian context, postclosure safety assessments must estimate radiological risk for comparison with regulatory criteria. The definition of radiological risk introduces a requirement to identify and then evaluate scenarios that describe quantitatively the possible behaviour of a disposal system and its surroundings for at least 10 4 years. This report examines the connection between the identification and evaluation of scenarios. It shows how a large collection of factors can be combined to form simple scenarios, and how a large number of simple scenarios can be grouped into a manageably small number of compound scenarios. The compound scenarios, notably the 'central' scenario, can be evaluated using a probabilistic systems assessment code such as SYVAC3 (SYstems Variability Analysis Code, generation 3) to estimate the radiological risk and other environmental impacts. Examples are taken from a long-term performance assessment study to demonstrate a pragmatic application of the procedure. (author)

  20. Satellite Power Systems (SPS) concept definition study. Volume 2, part 2: System engineering. [cost and programmatics

    Science.gov (United States)

    Hanley, G. M.

    1980-01-01

    The latest technical and programmatic developments are considered as well as expansions of the Rockwell SPS cost model covering each phase of the program through the year 2030. Comparative cost/economic analyses cover elements of the satellite, construction system, space transportation vehicles and operations, and the ground receiving station. System plans to define time phased costs and planning requirements that support major milestones through the year 2000. A special analysis is included on natural resources required to build the SPS reference configuration. An appendix contains the SPS Work Breakdown Structure and dictionary along with detail cost data sheet on each system and main element of the program. Over 200 line items address DDT&E, theoretical first unit, investment cost per satellite, and operations charges for replacement capital and normal operations and maintenance costs.

  1. PyNCS: a microkernel for high-level definition and configuration of neuromorphic electronic systems.

    Science.gov (United States)

    Stefanini, Fabio; Neftci, Emre O; Sheik, Sadique; Indiveri, Giacomo

    2014-01-01

    Neuromorphic hardware offers an electronic substrate for the realization of asynchronous event-based sensory-motor systems and large-scale spiking neural network architectures. In order to characterize these systems, configure them, and carry out modeling experiments, it is often necessary to interface them to workstations. The software used for this purpose typically consists of a large monolithic block of code which is highly specific to the hardware setup used. While this approach can lead to highly integrated hardware/software systems, it hampers the development of modular and reconfigurable infrastructures thus preventing a rapid evolution of such systems. To alleviate this problem, we propose PyNCS, an open-source front-end for the definition of neural network models that is interfaced to the hardware through a set of Python Application Programming Interfaces (APIs). The design of PyNCS promotes modularity, portability and expandability and separates implementation from hardware description. The high-level front-end that comes with PyNCS includes tools to define neural network models as well as to create, monitor and analyze spiking data. Here we report the design philosophy behind the PyNCS framework and describe its implementation. We demonstrate its functionality with two representative case studies, one using an event-based neuromorphic vision sensor, and one using a set of multi-neuron devices for carrying out a cognitive decision-making task involving state-dependent computation. PyNCS, already applicable to a wide range of existing spike-based neuromorphic setups, will accelerate the development of hybrid software/hardware neuromorphic systems, thanks to its code flexibility. The code is open-source and available online at https://github.com/inincs/pyNCS.

  2. PyNCS: a microkernel for high-level definition and configuration of neuromorphic electronic systems

    Science.gov (United States)

    Stefanini, Fabio; Neftci, Emre O.; Sheik, Sadique; Indiveri, Giacomo

    2014-01-01

    Neuromorphic hardware offers an electronic substrate for the realization of asynchronous event-based sensory-motor systems and large-scale spiking neural network architectures. In order to characterize these systems, configure them, and carry out modeling experiments, it is often necessary to interface them to workstations. The software used for this purpose typically consists of a large monolithic block of code which is highly specific to the hardware setup used. While this approach can lead to highly integrated hardware/software systems, it hampers the development of modular and reconfigurable infrastructures thus preventing a rapid evolution of such systems. To alleviate this problem, we propose PyNCS, an open-source front-end for the definition of neural network models that is interfaced to the hardware through a set of Python Application Programming Interfaces (APIs). The design of PyNCS promotes modularity, portability and expandability and separates implementation from hardware description. The high-level front-end that comes with PyNCS includes tools to define neural network models as well as to create, monitor and analyze spiking data. Here we report the design philosophy behind the PyNCS framework and describe its implementation. We demonstrate its functionality with two representative case studies, one using an event-based neuromorphic vision sensor, and one using a set of multi-neuron devices for carrying out a cognitive decision-making task involving state-dependent computation. PyNCS, already applicable to a wide range of existing spike-based neuromorphic setups, will accelerate the development of hybrid software/hardware neuromorphic systems, thanks to its code flexibility. The code is open-source and available online at https://github.com/inincs/pyNCS. PMID:25232314

  3. On the definition of Pfirsch--Schlueter and bootstrap currents in toroidal systems

    International Nuclear Information System (INIS)

    Coronado, M.; Wobig, H.

    1992-01-01

    In the plasma physics literature there appear two different definitions of Pfirsch--Schlueter current. One of them is predominantly used in equilibrium calculations and satisfies the condition I T =0. The other definition appears commonly in transport calculations and requires that the surface average of the dot product of the Pfirsch--Schlueter current density with the magnetic field vanish, i.e., left-angle J PS ·B right-angle=0. The difference between the definitions is a surface function. Within the framework of the moment equation approach, the total parallel current is completely determined through a surface average of Ohm's law; thus different definitions of Pfirsch--Schlueter current imply different expressions for the bootstrap current. Understanding the different implications of these two definitions is of particular importance when designing toroidal devices with minimized Pfirsch--Schlueter current or studying tokamaks with optimized bootstrap current. In this paper the definitions of Pfirsch--Schlueter and bootstrap current, as well as the expressions for the corresponding Pfirsch--Schlueter diffusion flux, are analyzed and discussed for the case of axisymmetric and nonaxisymmetric plasmas. Although in cases like a current-free stellarator or a large-aspect-ratio tokamak both definitions are equivalent, they are in general different, and in order to avoid misunderstandings it is therefore important to use only one. The most appropriate definition is I T =0. In this paper the equations for determining the bootstrap current within the framework of the fluid equations are also analyzed

  4. Development of a definitive method for iodine speciation in aquatic systems

    International Nuclear Information System (INIS)

    Reifenhaeuser, C.; Heumann, K.G.

    1990-01-01

    A definitive method of isotope dilution mass spectrometry (IDMS) was developed to determine four different iodine species in aquatic systems (iodide, iodate and two organoiodine compounds: one of the organic species is chromatographically elutable from a column filled with an anion exchanger resin, the other one is not). The iodine species were analysed after the isotope dilution step with an enriched 129 I spike and after their chromatographic separation. The total iodine concentration was measured after decomposition of organic compounds in the aquatic system by UV irradiation. Different types of natural water samples (river water, water of a pond, moorland lake water) were analysed and important water parameters like pH-value, redox potential, oxygen content and dissolved organic carbon were measured for each of these samples. The total iodine concentration in the different samples differed only slightly in the range of 2-7 μg/l. In most of the moorland lake water samples only the two organoiodine species could be detected. In these samples the concentration of iodide and iodate was less than the detection limit of 0.5 μg/l and 0.1 μg/l, respectively. On the other hand, all four iodine species could be determined in most of the river water samples. Positive correlations were found for the oxygen content of the water samples and the iodate concentration as well as for the redox potential and the anionic organoiodine compound. (orig.)

  5. Definition of the Flexible Image Transport System (FITS), version 3.0

    Science.gov (United States)

    Pence, W. D.; Chiappetti, L.; Page, C. G.; Shaw, R. A.; Stobie, E.

    2010-12-01

    The Flexible Image Transport System (FITS) has been used by astronomers for over 30 years as a data interchange and archiving format; FITS files are now handled by a wide range of astronomical software packages. Since the FITS format definition document (the “standard”) was last printed in this journal in 2001, several new features have been developed and standardized, notably support for 64-bit integers in images and tables, variable-length arrays in tables, and new world coordinate system conventions which provide a mapping from an element in a data array to a physical coordinate on the sky or within a spectrum. The FITS Working Group of the International Astronomical Union has therefore produced this new version 3.0 of the FITS standard, which is provided here in its entirety. In addition to describing the new features in FITS, numerous editorial changes were made to the previous version to clarify and reorganize many of the sections. Also included are some appendices which are not formally part of the standard. The FITS standard is likely to undergo further evolution, in which case the latest version may be found on the FITS Support Office Web site at http://fits.gsfc.nasa.gov/, which also provides many links to FITS-related resources.

  6. Definition of the Flexible Image Transport System (FITS), Version 3.0

    Science.gov (United States)

    Pence, W. D.; Chiapetti, L.; Page, C. G.; Shaw, R. A.; Stobie, E.

    2010-01-01

    The Flexible Image Transport System (FITS) has been used by astronomers for over 30 years as a data interchange and archiving format; FITS files are now handled by a wide range of astronomical software packages. Since the FITS format definition document (the "standard") was last printed in this journal in 2001, several new features have been developed and standardized, notably support for 64-bit integers in images and tables, variable-length arrays in tables, and new world coordinate system conventions which provide a mapping from an element in a data array to a physical coordinate on the sky or within a spectrum. The FITS Working Group of the International Astronomical Union has therefore produced this new Version 3.0 of the FITS standard, which is provided here in its entirety. In addition to describing the new features in FITS, numerous editorial changes were made to the previous version to clarify and reorganize many of the sections. Also included are some appendices which are not formally part of the standard. The FITS standard is likely to undergo further evolution, in which case the latest version may be found on the FITS Support Office Web site at http://fits.gsfc.nasa.gov/, which also provides many links to FITS-related resources.

  7. Space Operations Center system analysis. Volume 3, book 2: SOC system definition report, revision A

    Science.gov (United States)

    1982-01-01

    The Space Operations Center (SOC) orbital space station program operations are described. A work breakdown structure for the general purpose support equipment, construction and transportation support, and resupply and logistics support systems is given. The basis for the design of each element is presented, and a mass estimate for each element supplied. The SOC build-up operation, construction, flight support, and satellite servicing operations are described. Detailed programmatics and cost analysis are presented.

  8. Design of a Binocular Pupil and Gaze Point Detection System Utilizing High Definition Images

    Directory of Open Access Journals (Sweden)

    Yilmaz Durna

    2017-05-01

    Full Text Available This study proposes a novel binocular pupil and gaze detection system utilizing a remote full high definition (full HD camera and employing LabVIEW. LabVIEW is inherently parallel and has fewer time-consuming algorithms. Many eye tracker applications are monocular and use low resolution cameras due to real-time image processing difficulties. We utilized the computer’s direct access memory channel for rapid data transmission and processed full HD images with LabVIEW. Full HD images make easier determinations of center coordinates/sizes of pupil and corneal reflection. We modified the camera so that the camera sensor passed only infrared (IR images. Glints were taken as reference points for region of interest (ROI area selection of the eye region in the face image. A morphologic filter was applied for erosion of noise, and a weighted average technique was used for center detection. To test system accuracy with 11 participants, we produced a visual stimulus set up to analyze each eye’s movement. Nonlinear mapping function was utilized for gaze estimation. Pupil size, pupil position, glint position and gaze point coordinates were obtained with free natural head movements in our system. This system also works at 2046 × 1086 resolution at 40 frames per second. It is assumed that 280 frames per second for 640 × 480 pixel images is the case. Experimental results show that the average gaze detection error for 11 participants was 0.76° for the left eye, 0.89° for right eye and 0.83° for the mean of two eyes.

  9. PyNCS: a microkernel for high-level definition and configuration of neuromorphic electronic systems

    Directory of Open Access Journals (Sweden)

    Fabio eStefanini

    2014-08-01

    Full Text Available Neuromorphic hardware offers an electronic substrate for the realization of asynchronousevent-based sensory-motor systems and large-scale spiking neural network architectures. Inorder to characterize these systems, configure them, and carry out modeling experiments, it isoften necessary to interface them to workstations. The software used for this purpose typicallyconsists of a large monolithic block of code highly specific to the hardware setup used. While thisapproach can lead to highly integrated hardware/software systems, it hampers the developmentof modular and neuromorphic infrastructures. To alleviate this problem, we propose PyNCS,an open-source front-end for the definition of neural network models that is interfaced to thehardware through a set of Python Application Programming Interfaces (APIs. The designof PyNCS promotes modularity, portability and expandability and separates implementationfrom hardware description. The high-level front-end that comes with PyNCS includes tools todefine neural network models as well as to create, monitor and analyze spiking data. Here wereport the design philosophy behind the PyNCS framework and describe its implementation.We demonstrate its functionality with two representative case studies, one using an event-based neuromorphic vision sensor, and one using a set of multi-neuron devices for carryingout a cognitive decision-making task involving state-dependent computation. PyNCS, alreadyapplicable to a wide range of existing spike-based neuromorphic setups, will accelerate thedevelopment of hybrid software/hardware neuromorphic systems, thanks to its code flexibility.The code developed is open-source and available online at https://github.com/inincs/pyNCS.

  10. A systematic review of definitions and classification systems of adjacent segment pathology.

    Science.gov (United States)

    Kraemer, Paul; Fehlings, Michael G; Hashimoto, Robin; Lee, Michael J; Anderson, Paul A; Chapman, Jens R; Raich, Annie; Norvell, Daniel C

    2012-10-15

    Systematic review. To undertake a systematic review to determine how "adjacent segment degeneration," "adjacent segment disease," or clinical pathological processes that serve as surrogates for adjacent segment pathology are classified and defined in the peer-reviewed literature. Adjacent segment degeneration and adjacent segment disease are terms referring to degenerative changes known to occur after reconstructive spine surgery, most commonly at an immediately adjacent functional spinal unit. These can include disc degeneration, instability, spinal stenosis, facet degeneration, and deformity. The true incidence and clinical impact of degenerative changes at the adjacent segment is unclear because there is lack of a universally accepted classification system that rigorously addresses clinical and radiological issues. A systematic review of the English language literature was undertaken and articles were classified using the Grades of Recommendation Assessment, Development, and Evaluation criteria. RESULTS.: Seven classification systems of spinal degeneration, including degeneration at the adjacent segment, were identified. None have been evaluated for reliability or validity specific to patients with degeneration at the adjacent segment. The ways in which terms related to adjacent segment "degeneration" or "disease" are defined in the peer-reviewed literature are highly variable. On the basis of the systematic review presented in this article, no formal classification system for either cervical or thoracolumbar adjacent segment disorders currently exists. No recommendations regarding the use of current classification of degeneration at any segments can be made based on the available literature. A new comprehensive definition for adjacent segment pathology (ASP, the now preferred terminology) has been proposed in this Focus Issue, which reflects the diverse pathology observed at functional spinal units adjacent to previous spinal reconstruction and balances

  11. Revised definition of neuropathic pain and its grading system: an open case series illustrating its use in clinical practice.

    Science.gov (United States)

    Geber, Christian; Baumgärtner, Ulf; Schwab, Rainer; Müller, Harald; Stoeter, Peter; Dieterich, Marianne; Sommer, Clemens; Birklein, Frank; Treede, Rolf-Detlef

    2009-10-01

    The definition of neuropathic pain has recently been revised by an expert committee of the Neuropathic Pain Special Interest Group of the International Association for the Study of Pain (NeuPSIG) as "pain arising as direct consequence of a lesion or disease affecting the somatosensory system," and a grading system of "definite," "probable," and "possible" neuropathic pain has been introduced. This open case series of 5 outpatients (3 men, 2 women; mean age 48 +/- 12 years) demonstrates how the grading system can be applied, in combination with appropriate confirmatory testing, to diagnosis neuropathic conditions in clinical practice. The proposed grading system includes a dynamic algorithm that enhances the physician's ability to determine with a greater level of certainty whether a pain condition is neuropathic. Its clinical use should be further validated in prospective studies.

  12. A Natural Language Processing System That Links Medical Terms in Electronic Health Record Notes to Lay Definitions: System Development Using Physician Reviews.

    Science.gov (United States)

    Chen, Jinying; Druhl, Emily; Polepalli Ramesh, Balaji; Houston, Thomas K; Brandt, Cynthia A; Zulman, Donna M; Vimalananda, Varsha G; Malkani, Samir; Yu, Hong

    2018-01-22

    Many health care systems now allow patients to access their electronic health record (EHR) notes online through patient portals. Medical jargon in EHR notes can confuse patients, which may interfere with potential benefits of patient access to EHR notes. The aim of this study was to develop and evaluate the usability and content quality of NoteAid, a Web-based natural language processing system that links medical terms in EHR notes to lay definitions, that is, definitions easily understood by lay people. NoteAid incorporates two core components: CoDeMed, a lexical resource of lay definitions for medical terms, and MedLink, a computational unit that links medical terms to lay definitions. We developed innovative computational methods, including an adapted distant supervision algorithm to prioritize medical terms important for EHR comprehension to facilitate the effort of building CoDeMed. Ten physician domain experts evaluated the user interface and content quality of NoteAid. The evaluation protocol included a cognitive walkthrough session and a postsession questionnaire. Physician feedback sessions were audio-recorded. We used standard content analysis methods to analyze qualitative data from these sessions. Physician feedback was mixed. Positive feedback on NoteAid included (1) Easy to use, (2) Good visual display, (3) Satisfactory system speed, and (4) Adequate lay definitions. Opportunities for improvement arising from evaluation sessions and feedback included (1) improving the display of definitions for partially matched terms, (2) including more medical terms in CoDeMed, (3) improving the handling of terms whose definitions vary depending on different contexts, and (4) standardizing the scope of definitions for medicines. On the basis of these results, we have improved NoteAid's user interface and a number of definitions, and added 4502 more definitions in CoDeMed. Physician evaluation yielded useful feedback for content validation and refinement of this

  13. The importance of assessing medication exposure to the definition of refractory disease in systemic lupus erythematosus.

    Science.gov (United States)

    Arnaud, Laurent; Zahr, Noël; Costedoat-Chalumeau, Nathalie; Amoura, Zahir

    2011-09-01

    Treatment of patients with Systemic Lupus Erythematosus (SLE) who have active disease refractory to current therapeutic strategies continues to be a real challenge. Here, we propose that the classic definition of refractory SLE patients - failure to achieve adequate response to the standard of care - should be further refined to incorporate the dimension of adequate drug exposure. Inter-individual pharmacokinetic variability may induce insufficient exposure to many drugs used in SLE, leading to both apparent inefficacy of treatments and inappropriate therapeutic escalation. Among others, we have shown that individual assessment of exposure to mycophenolic acid, the active metabolite of mycophenolate mofetil (MMF) could be used to determine whether a given patient received adequate doses of MMF. We have also shown that measuring blood concentrations of hydroxychloroquine could be used as an efficient way to assess observance, which is a critical issue since a significant proportion of refractory SLE patients is likely to have poor observance as the primary source of treatment failure. Finally, we have underlined the importance of assessing drug interactions as SLE patients often require, in addition to immunosuppressants, several other drugs to prevent or treat associated conditions, which may result in decreased exposure to immunosuppressants. Considering these data, we believe that refractory SLE patients should not only be defined as the failure to achieve adequate therapeutic response to the standard of care, but should also incorporate the dimension of inadequate pharmacokinetic exposure and include drug blood level, interaction and observance monitoring. Copyright © 2011. Published by Elsevier B.V.

  14. Method and system for improving the definition of a scintillation detector

    International Nuclear Information System (INIS)

    Wilson, J.B.

    1977-01-01

    The definition of a tomographic readout image is highly sharpened and improved by minimizing or eliminating the effects of persisting images in the electronic scintillating circuit resulting from phosphorescent afterglow, by utilizing a special filter network in the detecting circuit

  15. A process-based model for the definition of hydrological alert systems in landslide risk mitigation

    Directory of Open Access Journals (Sweden)

    M. Floris

    2012-11-01

    Full Text Available The definition of hydrological alert systems for rainfall-induced landslides is strongly related to a deep knowledge of the geological and geomorphological features of the territory. Climatic conditions, spatial and temporal evolution of the phenomena and characterization of landslide triggering, together with propagation mechanisms, are the key elements to be considered. Critical steps for the development of the systems consist of the identification of the hydrological variable related to landslide triggering and of the minimum rainfall threshold for landslide occurrence.

    In this paper we report the results from a process-based model to define a hydrological alert system for the Val di Maso Landslide, located in the northeastern Italian Alps and included in the Vicenza Province (Veneto region, NE Italy. The instability occurred in November 2010, due to an exceptional rainfall event that hit the Vicenza Province and the entire NE Italy. Up to 500 mm in 3-day cumulated rainfall generated large flood conditions and triggered hundreds of landslides. During the flood, the Soil Protection Division of the Vicenza Province received more than 500 warnings of instability phenomena. The complexity of the event and the high level of risk to infrastructure and private buildings are the main reasons for deepening the specific phenomenon occurred at Val di Maso.

    Empirical and physically-based models have been used to identify the minimum rainfall threshold for the occurrence of instability phenomena in the crown area of Val di Maso landslide, where a retrogressive evolution by multiple rotational slides is expected. Empirical models helped in the identification and in the evaluation of recurrence of critical rainfall events, while physically-based modelling was essential to verify the effects on the slope stability of determined rainfall depths. Empirical relationships between rainfall and landslide consist of the calculation of rainfall

  16. A Common Definition of the System Operators' Core Activities[Electric Power Transmission System Operator

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-02-15

    In this report a common definition of the system operator's core activities in the Nordic countries is identified and also a list of non-core activities is introduced. As a starting point the common tasks for system responsibility as identified by Nordel has been used for the work. The term TSO (Transmission System Operator) is employed as a common denominator in the report. It is found out that the TSOs carry out common core activities in the roles as a transmission operator, a system operator and a balance settlement responsible. The core activities for the TSO as a transmission network operator are: Maintain the adequate transmission system in the long run and network development plan on the national as well as on the Nordic level using sophisticated analysis and planning methods and tools. Plan the transmission network on the national as well as on the Nordic level utilising new investments, renewal and maintenance of existing network components so that the network is secure to operate and adequate transmission capacity is guaranteed. Aim at timely network expansions using enhanced information exchange between the Nordic TSOs, and on the national level between the TSO and distribution and regional network operators, large consumers and large producers. Secure the technical compatibility with networks across the border and within a country by establishing connection requirements on the national level and ensuring that the national requirements are compatible across the Nordic power system. The core activities for the TSO as a system operator are: Define common technical requirements for the secure system operation using common planning, operation, connection and data exchange procedures. Secure the system operation with the operational planning for the following year by using information exchange between TSOs enabling the TSOs to make the best possible forecast of the global grid situation in order to assess the flows in their network and the available

  17. The diffuse chemosensory system: exploring the iceberg toward the definition of functional roles.

    Science.gov (United States)

    Sbarbati, Andrea; Bramanti, Placido; Benati, Donatella; Merigo, Flavia

    2010-05-01

    The diffuse chemosensory system (DCS) is an anatomical structure composed of solitary chemosensory cells (SCCs, also called solitary chemoreceptor cells), which have analogies with taste cells but are not aggregated in buds. The concept of DCS has been advanced, after the discovery that cells similar to gustatory elements are present in several organs. The elements forming the DCS share common morphological and biochemical characteristics with the taste cells located in taste buds of the oro-pharyngeal cavity but they are localized in internal organs. In particular, they may express molecules of the chemoreceptorial cascade (e.g. trans-membrane taste receptors, the G-protein alpha-gustducin, PLCbeta2, TRPM5). This article will focus on the mammalian DCS in apparatuses of endodermic origin (i.e. digestive and respiratory systems), which is composed of an enormous number of sensory elements and presents a multiplicity of morphological aspects. Recent research has provided an adequate description of these elements, but the functional role for the DCS in these apparatuses is unknown. The initial findings led to the definition of a DCS structured like an iceberg, with a mysterious "submerged" portion localized in the distal part of endodermic apparatuses. Recent work has focussed on the discovery of this submerged portion, which now appears less puzzling. However, the functional roles of the different cytotypes belonging to the DCS are not well known. Recent studies linked chemosensation of the intraluminal content to local control of absorptive and secretory (exocrine and endocrine) processes. Control of the microbial population and detection of irritants seem to be other possible functions of the DCS. In the light of these new findings, the DCS might be thought to be involved in a wide range of diseases of both the respiratory (e.g. asthma, chronic obstructive pulmonary disease, cystic fibrosis) and digestive apparatuses (absorptive or secretive diseases, dysmicrobism

  18. Tracking wildlife by satellite: Current systems and performance

    Science.gov (United States)

    Harris, Richard B.; Fancy, Steven G.; Douglas, David C.; Garner, Gerald W.; Amstrup, Steven C.; McCabe, Thomas R.; Pank, Larry F.

    1990-01-01

    Since 1984, the U.S. Fish and Wildlife Service has used the Argos Data Collection and Location System (DCLS) and Tiros-N series satellites to monitor movements and activities of 10 species of large mammals in Alaska and the Rocky Mountain region. Reliability of the entire system was generally high. Data were received from instrumented caribou (Rangifer tarandus) during 91% of 318 possible transmitter-months. Transmitters failed prematurely on 5 of 45 caribou, 2 of 6 muskoxen (Ovibos moschatus), and 1 of 2 gray wolves (Canis lupus). Failure rates were considerably higher for polar (Ursus maritimus) and brown (U. arctos) bears than for caribou (Rangifer tarandus). Efficiency of gathering both locational and sensor data was related to both latitude and topography.Mean error of locations was estimated to be 954 m (median = 543 m) for transmitters on captive animals; 90% of locations were indices of animal activity were developed and evaluated. For several species, the long-term index was correlated with movement patterns and the short-term index was calibrated to specific activity categories (e.g., lying, feeding, walking).Data processing and sampling considerations were evaluated. Algorithms for choosing the most reliable among a series of reported locations were investigated. Applications of satellite telemetry data and problems with lack of independence among locations are discussed.

  19. Progress in the integration of Test Blanket Systems in ITER equatorial port cells and in the interfaces definition

    Energy Technology Data Exchange (ETDEWEB)

    Pascal, R., E-mail: romain.pascal@iter.org [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France); Beloglazov, S.; Bonagiri, S. [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France); Commin, L. [CEA, IRFM, Cadarache (France); Cortes, P.; Giancarli, L.M.; Gliss, C.; Iseli, M.; Lanza, R.; Levesy, B.; Martins, J.-P. [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France); Neviere, J.-C. [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France); Comex-Nucleaire, 13115 Saint Paul Lez Durance (France); Patisson, L.; Plutino, D.; Shu, W. [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France); Swami, H.L. [Institute for Plasma Research, Bhat, Gandhinagar 382428 (India)

    2012-08-15

    Highlights: Black-Right-Pointing-Pointer The design integration of two test blanket systems in ITER port cell is addressed. Black-Right-Pointing-Pointer Definition of interfaces of TBSs with building and other ITER systems is done. Black-Right-Pointing-Pointer Designs of pipe forest, bioshield plug and ancillary equipment unit are described. Black-Right-Pointing-Pointer The maintenance of the two test blanket systems in ITER port cell is considered. Black-Right-Pointing-Pointer The management of the heat and tritium releases in the TBM port cell is described. - Abstract: In the framework of the TBM Program, three ITER vacuum vessel equatorial ports (no. 16, no. 18 and no. 02) have been allocated for the testing of up to six mock-ups of six different DEMO tritium breeding blankets. Each one is called a Test Blanket System (TBS). A TBS consists mainly of the Test Blanket Module (TBM), the in-vessel component facing the plasma, and several ancillary systems, in particular the cooling system and the tritium extraction system. Each port accommodates two TBMs and therefore the two TBSs have to share the corresponding port cell. This paper deals with the design integration aspects of the two TBSs in each port cell performed at ITER Organization (IO) with the corresponding definition of interfaces with other ITER systems. The performed activities have raised several issues that are discussed in the paper and for which design solutions are proposed.

  20. Effect of the Earth's inner structure on the gravity in definitions of height systems

    Science.gov (United States)

    Tenzer, Robert; Foroughi, Ismael; Pitoňák, Martin; Šprlák, Michal

    2017-04-01

    In context of the vertical datum unification, the geoid-to-quasi-geoid separation has been of significant interest in recent years, because most of existing local vertical datums are realized in the system of either normal or orthometric heights. Nevertheless, the normal-orthometric heights are still used in many other countries where the normal gravity values along leveling lines were adopted instead of the observed gravity. Whereas the conversion between the orthometric and normal heights is defined by means of the mean gravity disturbances (i.e. differences between the mean values of the actual and normal gravity) along the plumbline within the topography, differences between the normal and normal-orthometric heights can be described by means of the surface gravity disturbances. Since the normal gravity field does not reflect the topographic masses and actual mass density distribution inside the Earth, the definition of gravity represents a principal aspect for a realization of particular vertical datum. To address this issue in this study, we investigate effects of the Earth's inner density structure on the surface and mean gravity disturbances, and discuss their impact on the vertical datum realization. These two gravity field quantities are computed globally with a spectral resolution complete to a spherical harmonic degree 2160 using the global gravity, terrain, ice-thickness, inland bathymetry and crustal structure models. Our results reveal that both, the surface and mean gravity disturbances mostly comprise the gravitational signal of topography and masses distributed below the geoid surface. Moreover, in polar areas, a significant contribution comes from large glaciers. In contrast, the contributions of anomalous density distribution within the topography attributed to major lakes, sediments and bedrock density variations are much less pronounced. We also demonstrate that the mean gravity disturbances within the topography are significantly modified

  1. Ontology for Life-Cycle Modeling of Electrical Distribution Systems: Model View Definition

    Science.gov (United States)

    2013-06-01

    contexts; • To all attributes with a defined datatype indicating a measure datatype ; • To all properties and quantities with a defined datatype ...indicating a measure datatype and with no local unit definitions provided. 3.2.2.3 Project context A project representation context indicates the

  2. Systems biology definition of the core proteome of metabolism and expression is consistent with high-throughput data.

    Science.gov (United States)

    Yang, Laurence; Tan, Justin; O'Brien, Edward J; Monk, Jonathan M; Kim, Donghyuk; Li, Howard J; Charusanti, Pep; Ebrahim, Ali; Lloyd, Colton J; Yurkovich, James T; Du, Bin; Dräger, Andreas; Thomas, Alex; Sun, Yuekai; Saunders, Michael A; Palsson, Bernhard O

    2015-08-25

    Finding the minimal set of gene functions needed to sustain life is of both fundamental and practical importance. Minimal gene lists have been proposed by using comparative genomics-based core proteome definitions. A definition of a core proteome that is supported by empirical data, is understood at the systems-level, and provides a basis for computing essential cell functions is lacking. Here, we use a systems biology-based genome-scale model of metabolism and expression to define a functional core proteome consisting of 356 gene products, accounting for 44% of the Escherichia coli proteome by mass based on proteomics data. This systems biology core proteome includes 212 genes not found in previous comparative genomics-based core proteome definitions, accounts for 65% of known essential genes in E. coli, and has 78% gene function overlap with minimal genomes (Buchnera aphidicola and Mycoplasma genitalium). Based on transcriptomics data across environmental and genetic backgrounds, the systems biology core proteome is significantly enriched in nondifferentially expressed genes and depleted in differentially expressed genes. Compared with the noncore, core gene expression levels are also similar across genetic backgrounds (two times higher Spearman rank correlation) and exhibit significantly more complex transcriptional and posttranscriptional regulatory features (40% more transcription start sites per gene, 22% longer 5'UTR). Thus, genome-scale systems biology approaches rigorously identify a functional core proteome needed to support growth. This framework, validated by using high-throughput datasets, facilitates a mechanistic understanding of systems-level core proteome function through in silico models; it de facto defines a paleome.

  3. Esophageal transit study using a sliding sum image. Application to patients with probable and definite systemic sclerosis

    International Nuclear Information System (INIS)

    Nakajima, Kenichi; Hasegawa, Minoru; Inaki, Anri; Wakabayashi, Hiroshi; Takehara, Kazuhiko; Kinuya, Seigo; Hosoya, Tetsuo

    2011-01-01

    Esophageal complication is common in systemic sclerosis (SSc), but scintigraphic transit patterns based on each subtype have not been understood well. The aim of this study was to develop a new algorithm for integrating a dynamic esophageal transit study and to apply the method to patients with SSc. A total of 40 patients suspected of having SSc were examined by a dynamic esophageal transit study. The subtypes included 32 with definite SSc (15 limited cutaneous type and 17 diffuse cutaneous type) and 8 with probable SSc. The serial esophageal images were shifted and summed to a functional image (sliding sum image) and compared to a conventional condensed image analysis. Esophageal retention fraction at 90 s (R 90 ) and half-time (T 1/2 ) of transit were also measured. The four patterns of the sliding sum image and condensed image agreed in all patients. Abnormal retention patterns were observed in none of the 8 (0%) patients with the probable SSc and in 15 of 32 (47%) patients with definite SSc (p=0.014). The severity of scleroderma assessed by modified Rodnan skin thickness score correlated with that of esophageal retention R 90 (p=0.04). The sliding sum image is a simple and effective method for integrating esophageal transit. Patients with definite SSc and severe scleroderma had significantly higher retention patterns, while probable SSc patients showed no esophageal dysmotility. (author)

  4. The OMERACT psoriatic arthritis magnetic resonance imaging scoring system (PsAMRIS): definitions of key pathologies, suggested MRI sequences, and preliminary scoring system for PsA Hands

    DEFF Research Database (Denmark)

    Østergaard, Mikkel; McQueen, Fiona; Wiell, Charlotte

    2009-01-01

    This article describes a preliminary OMERACT psoriatic arthritis magnetic resonance image scoring system (PsAMRIS) for evaluation of inflammatory and destructive changes in PsA hands, which was developed by the international OMERACT MRI in inflammatory arthritis group. MRI definitions of important...... pathologies in peripheral PsA and suggestions concerning appropriate MRI sequences for use in PsA hands are also provided....

  5. Definition, translation and application of user-oriented languages as extensions of PL/1 in the CAD-systems REGENT

    International Nuclear Information System (INIS)

    Enderle, G.

    1975-09-01

    The integrated CAD-system REGENT serves for modular development of programs for different application areas, for management of data storage and data transfer and easy and safe application of programs by means of user-oriented languages. Programs, data and language for an application area form a REGENT-subsystem. The problem language system of REGENT, PLS (Problem Language System), provides facilities for the development of a problem oriented language for every subsystem as extensions of the base language PL/1. In this paper the translation of problem oriented languages by a precompiler into PL/1 and the definition of language extensions and datastructures for subsystems are described. Development and application of the language for a fluiddynamic-subsystem is shown. (orig.) [de

  6. Satellite Power Systems (SPS) concept definition study (Exhibit D). Volume 5: Systems engineering/integration research and technology

    Science.gov (United States)

    Hanley, G. M.

    1981-01-01

    Guidelines and ground rules followed in the development of requirements for the SPS are presented. Development planning objectives are specified in each of these areas, and evolutionary SPS program scenarios are described for the various concepts studied during the past one year contract. Program descriptions are presented as planning packages of technical tasks, and schedule phasing. Each package identifies the ground based technology effort that will facilitate SPS definitions, designs, development, and operations.

  7. Impact of revising the National Nosocomial Infection Surveillance System definition for catheter-related bloodstream infection in ICU: reproducibility of the National Healthcare Safety Network case definition in an Australian cohort of infection control professionals.

    Science.gov (United States)

    Worth, Leon J; Brett, Judy; Bull, Ann L; McBryde, Emma S; Russo, Philip L; Richards, Michael J

    2009-10-01

    Effective and comparable surveillance for central venous catheter-related bloodstream infections (CLABSIs) in the intensive care unit requires a reproducible case definition that can be readily applied by infection control professionals. Using a questionnaire containing clinical cases, reproducibility of the National Nosocomial Infection Surveillance System (NNIS) surveillance definition for CLABSI was assessed in an Australian cohort of infection control professionals participating in the Victorian Hospital Acquired Infection Surveillance System (VICNISS). The same questionnaire was then used to evaluate the reproducibility of the National Healthcare Safety Network (NHSN) surveillance definition for CLABSI. Target hospitals were defined as large metropolitan (1A) or other large hospitals (non-1A), according to the Victorian Department of Human Services. Questionnaire responses of Centers for Disease Control and Prevention NHSN surveillance experts were used as gold standard comparator. Eighteen of 21 eligible VICNISS centers participated in the survey. Overall concordance with the gold standard was 57.1%, and agreement was highest for 1A hospitals (60.6%). The proportion of congruently classified cases varied according to NNIS criteria: criterion 1 (recognized pathogen), 52.8%; criterion 2a (skin contaminant in 2 or more blood cultures), 83.3%; criterion 2b (skin contaminant in 1 blood culture and appropriate antimicrobial therapy instituted), 58.3%; non-CLABSI cases, 51.4%. When survey questions regarding identification of cases of CLABSI criterion 2b were removed (consistent with the current NHSN definition), overall percentage concordance increased to 62.5% (72.2% for 1A centers). Further educational interventions are required to improve the discrimination of primary and secondary causes of bloodstream infection in Victorian intensive care units. Although reproducibility of the CLABSI case definition is relatively poor, adoption of the revised NHSN definition

  8. Development of a large-screen high-definition laser video projection system

    Science.gov (United States)

    Clynick, Tony J.

    1991-08-01

    A prototype laser video projector which uses electronic, optical, and mechanical means to project a television picture is described. With the primary goal of commercial viability, the price/performance ratio of the chosen means is critical. The fundamental requirement has been to achieve high brightness, high definition images of at least movie-theater size, at a cost comparable with other existing large-screen video projection technologies, while having the opportunity of developing and exploiting the unique properties of the laser projected image, such as its infinite depth-of-field. Two argon lasers are used in combination with a dye laser to achieve a range of colors which, despite not being identical to those of a CRT, prove to be subjectively acceptable. Acousto-optic modulation in combination with a rotary polygon scanner, digital video line stores, novel specialized electro-optics, and a galvanometric frame scanner form the basis of the projection technique achieving a 30 MHz video bandwidth, high- definition scan rates (1125/60 and 1250/50), high contrast ratio, and good optical efficiency. Auditorium projection of HDTV pictures wider than 20 meters are possible. Applications including 360 degree(s) projection and 3-D video provide further scope for exploitation of the HD laser video projector.

  9. [Definition and specification requirements for PAC-systems (picture archiving and communication system). A performance index with reference to the standard "IEEE Recommended Practice for Software Requirement Specifications"].

    Science.gov (United States)

    König, H; Klose, K J

    1999-04-01

    The formulation of requirements is necessary to control the goals of a PACS project. Furthermore, in this way, the scope of functionality necessary to support radiological working processes becomes clear. Definitions of requirements and specification are formulated independently of systems according to the IEEE standard "Recommended Practice for Software Requirements Specifications". Definitions are given in the Request for Information, specifications in the Request for Proposal. Functional and non-functional requirements are distinguished. The solutions are rated with respect to scope, appropriateness and quality of implementation. A PACS checklist was created according to the methods described above. It is published on the homepage of the "Arbeitsgemeinschaft Informationstechnologie" (AGIT) within the "Deutsche Röntgengesellschaft" (DRG) (http://www.uni-marburg.de/mzr/agit). The checklist provides a discussion forum which should contribute to an agreement on accepted basic PACS functionalities.

  10. Novel, high-definition 3-D endoscopy system with real-time compression communication system to aid diagnoses and treatment between hospitals in Thailand.

    Science.gov (United States)

    Uemura, Munenori; Kenmotsu, Hajime; Tomikawa, Morimasa; Kumashiro, Ryuichi; Yamashita, Makoto; Ikeda, Testuo; Yamashita, Hiromasa; Chiba, Toshio; Hayashi, Koichi; Sakae, Eiji; Eguchi, Mitsuo; Fukuyo, Tsuneo; Chittmittrapap, Soottiporn; Navicharern, Patpong; Chotiwan, Pornarong; Pattana-Arum, Jirawat; Hashizume, Makoto

    2015-05-01

    Traditionally, laparoscopy has been based on 2-D imaging, which represents a considerable challenge. As a result, 3-D visualization technology has been proposed as a way to better facilitate laparoscopy. We compared the latest 3-D systems with high-end 2-D monitors to validate the usefulness of new systems for endoscopic diagnoses and treatment in Thailand. We compared the abilities of our high-definition 3-D endoscopy system with real-time compression communication system with a conventional high-definition (2-D) endoscopy system by asking health-care staff to complete tasks. Participants answered questionnaires and whether procedures were easier using our system or the 2-D endoscopy system. Participants were significantly faster at suture insertion with our system (34.44 ± 15.91 s) than with the 2-D system (52.56 ± 37.51 s) (P < 0.01). Most surgeons thought that the 3-D system was good in terms of contrast, brightness, perception of the anteroposterior position of the needle, needle grasping, inserting the needle as planned, and needle adjustment during laparoscopic surgery. Several surgeons highlighted the usefulness of exposing and clipping the bile duct and gallbladder artery, as well as dissection from the liver bed during laparoscopic surgery. In an image-transfer experiment with RePure-L®, participants at Rajavithi Hospital could obtain reconstructed 3-D images that were non-inferior to conventional images from Chulalongkorn University Hospital (10 km away). These data suggest that our newly developed system could be of considerable benefit to the health-care system in Thailand. Transmission of moving endoscopic images from a center of excellence to a rural hospital could help in the diagnosis and treatment of various diseases. © 2015 Japan Society for Endoscopic Surgery, Asia Endosurgery Task Force and Wiley Publishing Asia Pty Ltd.

  11. Parameters and definitions in applied technique quality test for nuclear magnetic resonance imaging system (NMRI)

    International Nuclear Information System (INIS)

    Lin Zhikai; Zhao Lancai

    1999-08-01

    During the past two decades, medical diagnostic imaging technique has achieved dramatic development such as CT, MRI, PET, DSA and so on. The most striking examples of them are the application of X ray computerized tomography (CT) and magnetic resonance imaging in the field of medical diagnosis. It can be predicted that magnetic resonance imaging (MRI) will definitely have more widespread prospects of applications and play more and more important role in clinical diagnosis looking forward to the development of image diagnostic technique for 21 st century. The authors also present the measuring methods for some parameters. The parameters described can be used for reference by clinical diagnosticians, operators on MRI and medical physicists who engages in image quality assurance (QA) and control (QC) in performing MRI acceptance test and routine test

  12. Dichotomy in the definition of prescriptive information suggests both prescribed data and prescribed algorithms: biosemiotics applications in genomic systems

    Directory of Open Access Journals (Sweden)

    D'Onofrio David J

    2012-03-01

    Full Text Available Abstract The fields of molecular biology and computer science have cooperated over recent years to create a synergy between the cybernetic and biosemiotic relationship found in cellular genomics to that of information and language found in computational systems. Biological information frequently manifests its "meaning" through instruction or actual production of formal bio-function. Such information is called Prescriptive Information (PI. PI programs organize and execute a prescribed set of choices. Closer examination of this term in cellular systems has led to a dichotomy in its definition suggesting both prescribed data and prescribed algorithms are constituents of PI. This paper looks at this dichotomy as expressed in both the genetic code and in the central dogma of protein synthesis. An example of a genetic algorithm is modeled after the ribosome, and an examination of the protein synthesis process is used to differentiate PI data from PI algorithms.

  13. Dichotomy in the definition of prescriptive information suggests both prescribed data and prescribed algorithms: biosemiotics applications in genomic systems.

    Science.gov (United States)

    D'Onofrio, David J; Abel, David L; Johnson, Donald E

    2012-03-14

    The fields of molecular biology and computer science have cooperated over recent years to create a synergy between the cybernetic and biosemiotic relationship found in cellular genomics to that of information and language found in computational systems. Biological information frequently manifests its "meaning" through instruction or actual production of formal bio-function. Such information is called prescriptive information (PI). PI programs organize and execute a prescribed set of choices. Closer examination of this term in cellular systems has led to a dichotomy in its definition suggesting both prescribed data and prescribed algorithms are constituents of PI. This paper looks at this dichotomy as expressed in both the genetic code and in the central dogma of protein synthesis. An example of a genetic algorithm is modeled after the ribosome, and an examination of the protein synthesis process is used to differentiate PI data from PI algorithms.

  14. Decision support for the definition of wind turbine systems adequacy to site specificities and weak electrical networks; Aide a la decision pour la definition d'un systeme eolien, adequation au site et a un reseau faible

    Energy Technology Data Exchange (ETDEWEB)

    Arbaoui, A

    2006-10-15

    A decision support system for the definition of wind turbine systems is developed by taking into account the wind and site characteristics, the wind turbine components and the electrical network properties close to the site. The approach is based on functional analysis, on the investigation of the functional fluxes and on the definition of a model suitable for supporting decision at the preliminary stages of wind turbine design. The complete set of solutions derived from the model is determined using a Constraint Satisfaction Problem solver. The intrinsic capability of the model to support decision is derived from the investigation of the model parsimony, precision, exactness and specialization. The model takes into account performance criteria resulting from knowledge of manufacturers, distributors and investors. These criteria are used to discriminate design alternatives. Design alternatives correspond to choices of site (wind, electric network) and wind turbine architectures (related to 7 design variables). Performance criteria are the cost of electric kWh, the amount of energy being produced and the discounted total cost of the project. Electric network connection to wind turbines is taken into account through slow variations of the voltage and Flickers phenomenon. First, the maximal rate of penetration of the wind turbine energy production is determined. Next, two design alternatives have been investigated to improve wind turbine system integration in electric distribution networks. These alternatives are a reactive power control system and an inertial energy storage system. Inertial storage systems seem to be more expensive than reactive power control systems for this type of application. The influence of site specificities on decision making process has been established through three different sites (a Mediterranean site and two sites located in northern Europe). Profits relative to the cost of kWh appear to be high for Mediterranean sites. Most of the

  15. Decision support for the definition of wind turbine systems adequacy to site specificities and weak electrical networks; Aide a la decision pour la definition d'un systeme eolien, adequation au site et a un reseau faible

    Energy Technology Data Exchange (ETDEWEB)

    Arbaoui, A

    2006-10-15

    A decision support system for the definition of wind turbine systems is developed by taking into account the wind and site characteristics, the wind turbine components and the electrical network properties close to the site. The approach is based on functional analysis, on the investigation of the functional fluxes and on the definition of a model suitable for supporting decision at the preliminary stages of wind turbine design. The complete set of solutions derived from the model is determined using a Constraint Satisfaction Problem solver. The intrinsic capability of the model to support decision is derived from the investigation of the model parsimony, precision, exactness and specialization. The model takes into account performance criteria resulting from knowledge of manufacturers, distributors and investors. These criteria are used to discriminate design alternatives. Design alternatives correspond to choices of site (wind, electric network) and wind turbine architectures (related to 7 design variables). Performance criteria are the cost of electric kWh, the amount of energy being produced and the discounted total cost of the project. Electric network connection to wind turbines is taken into account through slow variations of the voltage and Flickers phenomenon. First, the maximal rate of penetration of the wind turbine energy production is determined. Next, two design alternatives have been investigated to improve wind turbine system integration in electric distribution networks. These alternatives are a reactive power control system and an inertial energy storage system. Inertial storage systems seem to be more expensive than reactive power control systems for this type of application. The influence of site specificities on decision making process has been established through three different sites (a Mediterranean site and two sites located in northern Europe). Profits relative to the cost of kWh appear to be high for Mediterranean sites. Most of the

  16. Strategic avionics technology definition studies. Subtask 3-1A: Electrical Actuation (ELA) systems

    Science.gov (United States)

    Pond, Charles L.; Mcdermott, William A.; Lum, Ben T. F.

    1993-01-01

    Electrical actuator (ELA) power efficiency and requirements are examined for space system application. Requirements for Space Shuttle effector systems are presented, along with preliminary ELA trades and selection to form a preliminary ELA system baseline. Power and energy requirements for this baseline ELA system are applicable to the Space Shuttle and similar space vehicles.

  17. Structural lesions detected by magnetic resonance imaging in the spine of patients with spondyloarthritis - definitions, assessment system, and reference image set

    DEFF Research Database (Denmark)

    Østergaard, Mikkel; Maksymowych, Walter P; Pedersen, Susanne J

    2009-01-01

    are assessed at each vertebral endplate at all 23 spinal levels from C2/3 to L5/S1, whereas facet joint lesions are to be assessed by segmental level (cervical, thoracic, and lumbar). CONCLUSION: An anatomy-based set of definitions and an assessment system for structural lesions in the spine of patients......OBJECTIVE: There is no reliable and sensitive magnetic resonance imaging (MRI) assessment system for structural lesions in patients with spondyloarthritis (SpA). We sought to develop and illustrate a detailed anatomy-based set of MRI definitions and an assessment system for structural lesions...... in the spine of patients with SpA. METHODS: MRI definitions of different structural ("chronic") lesions at various anatomical locations in the spine, and an accompanying assessment system, were agreed by consensus within the Canada-Denmark MRI working group. Subsequently, a reference image set...

  18. Guided waves based SHM systems for composites structural elements: statistical analyses finalized at probability of detection definition and assessment

    Science.gov (United States)

    Monaco, E.; Memmolo, V.; Ricci, F.; Boffa, N. D.; Maio, L.

    2015-03-01

    Maintenance approaches based on sensorised structures and Structural Health Monitoring systems could represent one of the most promising innovations in the fields of aerostructures since many years, mostly when composites materials (fibers reinforced resins) are considered. Layered materials still suffer today of drastic reductions of maximum allowable stress values during the design phase as well as of costly and recurrent inspections during the life cycle phase that don't permit of completely exploit their structural and economic potentialities in today aircrafts. Those penalizing measures are necessary mainly to consider the presence of undetected hidden flaws within the layered sequence (delaminations) or in bonded areas (partial disbonding); in order to relax design and maintenance constraints a system based on sensors permanently installed on the structure to detect and locate eventual flaws can be considered (SHM system) once its effectiveness and reliability will be statistically demonstrated via a rigorous Probability Of Detection function definition and evaluation. This paper presents an experimental approach with a statistical procedure for the evaluation of detection threshold of a guided waves based SHM system oriented to delaminations detection on a typical wing composite layered panel. The experimental tests are mostly oriented to characterize the statistical distribution of measurements and damage metrics as well as to characterize the system detection capability using this approach. Numerically it is not possible to substitute part of the experimental tests aimed at POD where the noise in the system response is crucial. Results of experiments are presented in the paper and analyzed.

  19. Decision support for the definition of wind turbine systems adequacy to site specificities and weak electrical networks

    International Nuclear Information System (INIS)

    Arbaoui, A.

    2006-10-01

    A decision support system for the definition of wind turbine systems is developed by taking into account the wind and site characteristics, the wind turbine components and the electrical network properties close to the site. The approach is based on functional analysis, on the investigation of the functional fluxes and on the definition of a model suitable for supporting decision at the preliminary stages of wind turbine design. The complete set of solutions derived from the model is determined using a Constraint Satisfaction Problem solver. The intrinsic capability of the model to support decision is derived from the investigation of the model parsimony, precision, exactness and specialization. The model takes into account performance criteria resulting from knowledge of manufacturers, distributors and investors. These criteria are used to discriminate design alternatives. Design alternatives correspond to choices of site (wind, electric network) and wind turbine architectures (related to 7 design variables). Performance criteria are the cost of electric kWh, the amount of energy being produced and the discounted total cost of the project. Electric network connection to wind turbines is taken into account through slow variations of the voltage and Flickers phenomenon. First, the maximal rate of penetration of the wind turbine energy production is determined. Next, two design alternatives have been investigated to improve wind turbine system integration in electric distribution networks. These alternatives are a reactive power control system and an inertial energy storage system. Inertial storage systems seem to be more expensive than reactive power control systems for this type of application. The influence of site specificities on decision making process has been established through three different sites (a Mediterranean site and two sites located in northern Europe). Profits relative to the cost of kWh appear to be high for Mediterranean sites. Most of the

  20. 78 FR 803 - Revisions to Electric Reliability Organization Definition of Bulk Electric System and Rules of...

    Science.gov (United States)

    2013-01-04

    ... Bulk 74. Electric System 1. Inclusion I1 (Transformers) 75. Commission Determination 80. 2. Inclusion... configurations are included in the bulk electric system. Inclusions: I1--Transformers with the primary terminal... bulk electric system. 15. NERC explained that inclusion I1 includes transformers with the primary...

  1. System Definition of the James Webb Space Telescope (JWST) Integrated Science Instrument Module (ISIM)

    Science.gov (United States)

    Lundquist, Ray; Aymergen, Cagatay; VanCampen, Julie; Abell, James; Smith, Miles; Driggers, Phillip

    2008-01-01

    The Integrated Science Instrument Module (ISIM) for the James Webb Space Telescope (JWST) provides the critical functions and the environment for the four science instruments on JWST. This complex system development across many international organizations presents unique challenges and unique solutions. Here we describe how the requirement flow has been coordinated through the documentation system, how the tools and processes are used to minimize impact to the development of the affected interfaces, how the system design has matured, how the design review process operates, and how the system implementation is managed through reporting to ensure a truly world class scientific instrument compliment is created as the final product.

  2. Baseband Transceiver Design of a High Definition Radio FM System Using Joint Theoretical Analysis and FPGA Implementation

    Directory of Open Access Journals (Sweden)

    Chien-Sheng Chen

    2014-01-01

    Full Text Available Advances in wireless communications have enabled various technologies for wireless digital communication. In the field of digital radio broadcasting, several specifications have been proposed, such as Eureka-147 and digital radio mondiale (DRM. These systems require a new spectrum assignment, which incurs heavy cost due to the depletion of the available spectrum. Therefore, the in-band on-channel (IBOC system has been developed to work in the same band with the conventional analog radio and to provide digital broadcasting services. This paper discusses the function and algorithm of the high definition (HD radio frequency modulation (FM digital radio broadcasting system. Content includes data format allocation, constellation mapping, orthogonal frequency division multiplexing (OFDM modulation of the transmitter, timing synchronization, OFDM demodulation, integer and fraction carrier frequency (integer carrier frequency offset (ICFO and fractional CFO (FCFO estimation, and channel estimation of the receiver. When we implement this system to the field programmable gate array (FPGA based on a hardware platform, both theoretical and practical aspects have been considered to accommodate the available hardware resources.

  3. A Glossary of Terms, Definitions, Acronyms, and Abbreviations Related to the National Airspace System (NAS)

    Science.gov (United States)

    1990-06-01

    System ACAS Airborne Collision Avoidance System ACB Adjacent Center Backup ACC ACCumulator ACC Area Control Center ACCAS Alto Cumulus CAtellanuS ACCC...subsystem) FFC For Further Clearance FFF Form, Fit, and Function FFF Form, Fix, and Function FFLT Familiarize FLighT FFM Far Field Monitor (associated with

  4. The Strategic Thinking Process: Efficient Mobilization of Human Resources for System Definition

    Science.gov (United States)

    Covvey, H. D.

    1987-01-01

    This paper describes the application of several group management techniques to the creation of needs specifications and information systems strategic plans in health care institutions. The overall process is called the “Strategic Thinking Process”. It is a formal methodology that can reduce the time and cost of creating key documents essential for the successful implementation of health care information systems.

  5. Toward a formal definition of water scarcity in natural human systems

    Science.gov (United States)

    W.K. Jaeger; A.J. Plantinga; H. Chang; K. Dello; G. Grant; D. Hulse; J.J. McDonnell; S. Lancaster; H. Moradkhani; A.T. Morzillo; P. Mote; A. Nolin; M. Santlemann; J. Wu

    2013-01-01

    Water scarcity may appear to be a simple concept, but it can be difficult to apply to complex natural-human systems. While aggregate scarcity indices are straightforward to compute, they do not adequately represent the spatial and temporal variations in water scarcity that arise from complex systems interactions. The uncertain effects of future climate change on water...

  6. 75 FR 2457 - Defense Federal Acquisition Regulation Supplement; Business Systems-Definition and Administration...

    Science.gov (United States)

    2010-01-15

    ... element of an acceptable estimating system. * * * * * (c) * * * (3) The auditor conducts estimating system... as contained in 252.215-7002(d). * * * * * (f) The ACO, in consultation with the auditor, shall-- (1... findings--(1) Reporting of audit findings. The auditor shall document findings and recommendations in a...

  7. Definition of propulsion system for V/STOL research and technology aircraft

    Science.gov (United States)

    1977-01-01

    Wind tunnel test support, aircraft contractor support, a propulsion system computer card deck, preliminary design studies, and propulsion system development plan are reported. The Propulsion system consists of two lift/cruise turbofan engines, one turboshaft engine and one lift fan connected together with shafting into a combiner gearbox. Distortion parameter levels from 40 x 80 test data were within the established XT701-AD-700 limits. The three engine-three fan system card deck calculates either vertical or conventional flight performance, installed or uninstalled. Design study results for XT701 engine modifications, bevel gear cross shaft location, fixed and tilt fan frames and propulsion system controls are described. Optional water-alcohol injection increased total net thrust 10.3% on a 90 F day. Engines have sufficient turbine life for 500 hours of the RTA duty cycle.

  8. Information model of trainee characteristics with definition of stochastic behavior of dynamic system

    Science.gov (United States)

    Sumin, V. I.; Smolentseva, T. E.; Belokurov, S. V.; Lankin, O. V.

    2018-03-01

    In the work the process of formation of trainee characteristics with their subsequent change is analyzed and analyzed. Characteristics of trainees were obtained as a result of testing for each section of information on the chosen discipline. The results obtained during testing were input to the dynamic system. The area of control actions consisting of elements of the dynamic system is formed. The limit of deterministic predictability of element trajectories in dynamical systems based on local or global attractors is revealed. The dimension of the phase space of the dynamic system is determined, which allows estimating the parameters of the initial system. On the basis of time series of observations, it is possible to determine the predictability interval of all parameters, which make it possible to determine the behavior of the system discretely in time. Then the measure of predictability will be the sum of Lyapunov’s positive indicators, which are a quantitative measure for all elements of the system. The components for the formation of an algorithm allowing to determine the correlation dimension of the attractor for known initial experimental values of the variables are revealed. The generated algorithm makes it possible to carry out an experimental study of the dynamics of changes in the trainee’s parameters with initial uncertainty.

  9. Definition of the topological structure of the automatic control system of spacecrafts

    International Nuclear Information System (INIS)

    KrasnoyarskiyRabochiy prospect, Krasnoyarsk, 660014 (Russian Federation))" data-affiliation=" (Siberian State Aerospace University named after Academician M.F.Reshetnev 31 KrasnoyarskiyRabochiy prospect, Krasnoyarsk, 660014 (Russian Federation))" >Zelenkov, P V; KrasnoyarskiyRabochiy prospect, Krasnoyarsk, 660014 (Russian Federation))" data-affiliation=" (Siberian State Aerospace University named after Academician M.F.Reshetnev 31 KrasnoyarskiyRabochiy prospect, Krasnoyarsk, 660014 (Russian Federation))" >Karaseva, M V; KrasnoyarskiyRabochiy prospect, Krasnoyarsk, 660014 (Russian Federation))" data-affiliation=" (Siberian State Aerospace University named after Academician M.F.Reshetnev 31 KrasnoyarskiyRabochiy prospect, Krasnoyarsk, 660014 (Russian Federation))" >Tsareva, E A; Tsarev, R Y

    2015-01-01

    The paper considers the problem of selection the topological structure of the automated control system of spacecrafts. The integer linear model of mathematical programming designed to define the optimal topological structure for spacecraft control is proposed. To solve the determination problem of topological structure of the control system of spacecrafts developed the procedure of the directed search of some structure variants according to the scheme 'Branch and bound'. The example of the automated control system of spacecraft development included the combination of ground control stations, managing the spacecraft of three classes with a geosynchronous orbit with constant orbital periods is presented

  10. Compendium of Executive Summaries from the Maglev System Concept Definition. Final Reports

    National Research Council Canada - National Science Library

    1993-01-01

    ...) studies awarded under the National Maglev Initiative. These summaries present the technical feasibility, performance, capital, operating and maintenance costs for a maglev system that would be available by the year 2000...

  11. Definition and analytical evaluation of a power management system for tilt-rotor aircraft

    Science.gov (United States)

    Morris, J. J.; Alexander, H. R.

    1978-01-01

    The paper reviews the special design criteria which apply to power management in a tilt-rotor aircraft. These include the need for accurate and fast control of rpm and thrust, while accounting for the dynamic interactions between rotor systems caused by cross-shafting and aircraft lateral/directional response. The power management system is also required to provide acceptable high speed sensitivity to longitudinal turbulence. It is shown that the criteria can best be met using a single governor adjusting the collective pitch by an amount proportional to a combination of the average rpm and the integral of the average rpm of the two rotors. This system is evaluated and compared with other candidate systems in hover and cruise flight.

  12. Definition of a remuneration system for heat from renewable resources; Ausgestaltung einer Einspeiseverguetung fuer erneuerbare Waerme

    Energy Technology Data Exchange (ETDEWEB)

    Dettli, R.; Ott, W.; Philippen, D.; Umbricht, A.

    2009-06-15

    This report for the Swiss Federal Office of Energy (SFOE) deals with proposals for a remuneration system for heat obtained from renewable resources. Local and regional district heating systems cover around three percent of Swiss heating needs. The authors estimate that, if these systems were to be operated completely using renewable resources such as biomass, ambient heat and the renewable portion of heat from waste incineration, around seven per cent of needs could be met. Further, around 10,000 heating systems with a power of more than 350 kW could be operated with renewables. A further potential for the use of renewable heating resources can be found in wastewater treatment plants and industrial waste heat. Various obstacles and restraints on the use of renewable resources in the heating area are discussed. The idea of providing a cost-covering remuneration system for heat is discussed and compared with that for renewable electricity. The proposed system is discussed, which would provide investment subsidies, risk-coverage and project development subsidies. The report discusses the results of a market analysis and the differences to be found between the markets for electricity and heat. Existing promotional programs are noted and the aims of a possible remuneration system are discussed. A concept for a promotion program for renewable heat generation and the use of waste heat is introduced. The installations to be promoted and the amount of remuneration to be paid out are discussed. Finally, the costs and the effects of the proposed promotion scheme are discussed. A comprehensive appendix provides details on the proposed system and provides information on market volume, energy resources, networks and infrastructure, providers of heat energy, heat consumers and general conditions as far as factors such as pricing and legislation are concerned. Finally, the 'Climate Cent' foundation is commented on.

  13. Definition and means of maintaining the ventilation system confinement portion of the PFP safety envelope

    Energy Technology Data Exchange (ETDEWEB)

    Dick, J.D.; Grover, G.A.; O`Brien, P.M., Fluor Daniel Hanford

    1997-03-05

    The Plutonium Finishing Plant Heating Ventilation and Cooling system provides for the confinement of radioactive releases to the environment and provides for the confinement of radioactive contamination within designated zones inside the facility. This document identifies the components and procedures necessary to ensure the HVAC system provides these functions. Appendices E through J provide a snapshot of non-safety class HVAC equipment and need not be updated when the remainder of the document and Appendices A through D are updated.

  14. Definitive design status of the SP-100 Ground Engineering System Test Site

    International Nuclear Information System (INIS)

    Renkey, E.J. Jr.; Bazinet, G.D.; Bitten, E.J.; Brackenbury, P.J.; Carlson, W.F.; Irwin, J.J.; Edwards, P.A.; Shen, E.J.; Titzler, P.A.

    1989-05-01

    The SP-100 reactor will be ground tested at the SP-100 Ground Engineering System (GES) Test Site on the US Department of Energy (DOE) Hanford Site near Richland, Washington. Project direction and the flight system design evolution have resulted in a smaller reactor size and the consequential revision to Test Site features to accommodate the design changes and reduce Test Site costs. The significant design events since the completion of the Conceptual Design are discussed in this paper

  15. Definitive design status of the SP-100 Ground Engineering System Test Site

    Energy Technology Data Exchange (ETDEWEB)

    Renkey, E.J. Jr.; Bazinet, G.D.; Bitten, E.J.; Brackenbury, P.J.; Carlson, W.F.; Irwin, J.J.; Edwards, P.A.; Shen, E.J.; Titzler, P.A.

    1989-05-01

    The SP-100 reactor will be ground tested at the SP-100 Ground Engineering System (GES) Test Site on the US Department of Energy (DOE) Hanford Site near Richland, Washington. Project direction and the flight system design evolution have resulted in a smaller reactor size and the consequential revision to Test Site features to accommodate the design changes and reduce Test Site costs. The significant design events since the completion of the Conceptual Design are discussed in this paper.

  16. Earth Observatory Satellite system definition study. Report 3: Design cost trade-off studies and recommendations

    Science.gov (United States)

    1974-01-01

    An analysis of the design and cost tradeoff aspects of the Earth Observatory Satellite (EOS) development is presented. The design/cost factors that affect a series of mission/system level concepts are discussed. The subjects considered are as follows: (1) spacecraft subsystem cost tradeoffs, (2) ground system cost tradeoffs, and (3) program cost summary. Tables of data are provided to summarize the results of the analyses. Illustrations of the various spacecraft configurations are included.

  17. Monitoring and tracing of critical software systems: State of the work and project definition

    Science.gov (United States)

    2008-12-01

    acoustic processing as well as 2D and 3D graphics rendering. Kernel Tracing The instrumented QNX microkernel is equipped with an event-gathering module...and runs at 98% of the speed of the regular microkernel . When tracing, system activity is intercepted by generating time-stamped and CPU stamped...increase the performance of the system, microkernels run most of their services in user space, aiming to improve maintainability and modularity of the

  18. A degree of controllability definition - Fundamental concepts and application to modal systems

    Science.gov (United States)

    Viswanathan, C. N.; Longman, R. W.; Likins, P. W.

    1984-01-01

    Starting from basic physical considerations, this paper develops a concept of the degree of controllability of a control system, and then develops numerical methods to generate approximate values of the degree of controllability for any linear time-invariant system. In many problems, such as the control of future, very large, flexible spacecraft and certain chemical process control problems, the question of how to choose the number and locations of the control system actuators is an important one. The results obtained here offer the control system designer a tool which allows him to rank the effectiveness of alternative actuator distributions, and hence to choose the actuator locations on a rational basis. The degree of controllability is shown to take a particularly simple form when the dynamic equations of a satellite are in second-order modal form. The degree of controllability concept has still other fundamental uses - it allows one to study the system structural relations between the various inputs and outputs of a linear system, which has applications to decoupling and model reduction.

  19. Decision Support System Requirements Definition for Human Extravehicular Activity Based on Cognitive Work Analysis.

    Science.gov (United States)

    Miller, Matthew James; McGuire, Kerry M; Feigh, Karen M

    2017-06-01

    The design and adoption of decision support systems within complex work domains is a challenge for cognitive systems engineering (CSE) practitioners, particularly at the onset of project development. This article presents an example of applying CSE techniques to derive design requirements compatible with traditional systems engineering to guide decision support system development. Specifically, it demonstrates the requirements derivation process based on cognitive work analysis for a subset of human spaceflight operations known as extravehicular activity . The results are presented in two phases. First, a work domain analysis revealed a comprehensive set of work functions and constraints that exist in the extravehicular activity work domain. Second, a control task analysis was performed on a subset of the work functions identified by the work domain analysis to articulate the translation of subject matter states of knowledge to high-level decision support system requirements. This work emphasizes an incremental requirements specification process as a critical component of CSE analyses to better situate CSE perspectives within the early phases of traditional systems engineering design.

  20. Definition, modeling and simulation of a grid computing system for high throughput computing

    CERN Document Server

    Caron, E; Tsaregorodtsev, A Yu

    2006-01-01

    In this paper, we study and compare grid and global computing systems and outline the benefits of having an hybrid system called dirac. To evaluate the dirac scheduling for high throughput computing, a new model is presented and a simulator was developed for many clusters of heterogeneous nodes belonging to a local network. These clusters are assumed to be connected to each other through a global network and each cluster is managed via a local scheduler which is shared by many users. We validate our simulator by comparing the experimental and analytical results of a M/M/4 queuing system. Next, we do the comparison with a real batch system and we obtain an average error of 10.5% for the response time and 12% for the makespan. We conclude that the simulator is realistic and well describes the behaviour of a large-scale system. Thus we can study the scheduling of our system called dirac in a high throughput context. We justify our decentralized, adaptive and oppor! tunistic approach in comparison to a centralize...

  1. Assessing the reproducibility of high definition urethral pressure profilometry and its correlation with an air-charged system.

    Science.gov (United States)

    Klünder, Mario; Amend, Bastian; Sawodny, Oliver; Stenzl, Arnulf; Ederer, Michael; Kelp, Alexandra; Sievert, Karl-Dietrich; Feuer, Ronny

    2017-06-01

    Recently, a new urodynamic method for the assessment of stress urinary incontinence called high definition urethral pressure profilometry (HD-UPP) has been introduced. This method combines a novel microtip catheter with advanced signal processing to enable spatial data location and the reconstruction of a pressure image inside the urethra. In order to assess the reproducibility of HD-UPP data, we statistically evaluate HD-UPP datasets and compare them to data from a double balloon air-charged system. Both catheters are used on sedated female minipigs. Data from the microtip catheter are processed through a signal reconstruction algorithm, urodynamic features are extracted, and compared to the air-charged system. Reproducibility of HD-UPP data is assessed by statistically evaluating consecutive, intra-individual datasets. HD-UPP delivers results in agreement with previous comparisons of microtip and air-charged systems. The average deviation of two consecutive, intra-individual pressure images is very low at 7 cm H 2 O. HD-UPP provides physicians with detailed information on the pressure distribution inside the urethra. Through comparison with an air-charged catheter, it is shown that HD-UPP delivers results in agreement with previous studies on the comparison of microtip and air-charged catheters. It provides excellent reproducibility, as the difference between sequentially measured profiles from the same minipig is significantly lower than the one between profiles from different minipigs. © 2016 Wiley Periodicals, Inc.

  2. The ‘Blame Game’: Discourse Analysis of Family Members’ and Therapist Negotiation of Problem Definition in Systemic Family Therapy

    Directory of Open Access Journals (Sweden)

    Pinelopi Patrika

    2016-03-01

    Full Text Available The present article aims at shedding light to the complex ways in which blame and responsibility are negotiated, when family members and the therapist engage in problem definition talk in systemic family therapy. The article draws from a qualitative research study which was designed to explore problem talk in systemic family therapy by means of discourse analysis methodology. Nine videotaped initial systemic family therapy sessions in which four different therapists and six different families with a variety of reported difficulties were sampled. They were transcribed verbatim and subjected to micro-analysis by means of the Discursive Action Model. In the present article, we present the detailed analysis of one of the identified patterns of blame allocation, in which family members are shown to construct the identified patient’s deviation from normality as the cause of their difficulties while the therapist is shown to attempt to exonerate blame from the identified patient by means of positive connotation. We discuss the implications of our analysis for theory development and clinical practice in the field, in the context of a growing body of related research. We also hint to the potential of discourse analysis methodology for family therapy research.

  3. Definition of coordinate system for three-dimensional data analysis in the foot and ankle.

    LENUS (Irish Health Repository)

    Green, Connor

    2012-02-01

    BACKGROUND: Three-dimensional data is required to have advanced knowledge of foot and ankle kinematics and morphology. However, studies have been difficult to compare due to a lack of a common coordinate system. Therefore, we present a means to define a coordinate frame in the foot and ankle and its clinical application. MATERIALS AND METHODS: We carried out ten CT scans in anatomically normal feet and segmented them in a general purpose segmentation program for grey value images. 3D binary formatted stereolithography files were then create and imported to a shape analysis program for biomechanics which was used to define a coordinate frame and carry out morphological analysis of the forefoot. RESULTS: The coordinate frame had axes standard deviations of 2.36 which are comparable to axes variability of other joint coordinate systems. We showed a strong correlation between the lengths of the metatarsals within and between the columns of the foot and also among the lesser metatarsal lengths. CONCLUSION: We present a reproducible method for construction of a coordinate system for the foot and ankle with low axes variability. CLINICAL RELEVANCE: To conduct meaningful comparison between multiple subjects the coordinate system must be constant. This system enables such comparison and therefore will aid morphological data collection and improve preoperative planning accuracy.

  4. Revising the definition of the crustacean seta and setal classification systems based on examinations of the mouthpart setae of seven species of decapods

    DEFF Research Database (Denmark)

    Garm, Anders Lydik

    2004-01-01

    and problems in making a consistent classification system. Here, the cuticular projections on the mouthparts of seven species of decapods are examined by scanning and transmission electron microscopy. A new definition is given: a seta is an elongate projection with a more or less circular base and a continuous...... and not evolutionary history. This classification system is compared with earlier systems. (C) 2004 The Linnean Society of London....

  5. Report of activities of the advanced coal extraction systems definition project, 1979 - 1980

    Science.gov (United States)

    Lavin, M. L.; Isenberg, L.

    1981-01-01

    During this period effort was devoted to: formulation of system performance goals in the areas of production cost, miner safety, miner health, environmental impact, and coal conservation, survey and in depth assessment of promising technology, and characterization of potential resource targets. Primary system performance goals are to achieve a return on incremental investment of 150% of the value required for a low risk capital improvement project and to reduce deaths and disability injuries per million man-hour by 50%. Although these performance goals were developed to be immediately applicable to the Central Appalachian coal resources, they were also designed to be readily adaptable to other coals by appending a geological description of the new resource. The work done on technology assessment was concerned with the performance of the slurry haulage system.

  6. On the definition of exergy efficiencies for petroleum systems: Application to offshore oil and gas processing

    DEFF Research Database (Denmark)

    Nguyen, Tuong-Van; Voldsund, Mari; Elmegaard, Brian

    2014-01-01

    Exergy-based efficiencies are measures of the thermodynamic perfection of systems and processes. A meaningful formulation of these performance criteria for petroleum systems is difficult because of (i) the high chemical exergy of hydrocarbons, (ii) the large variety of chemical components, and (iii....... They showed a low sensitivity to performance improvements, gave inconsistent results, or favoured facilities operating under certain con-ditions. We suggest an alternative formulation, called the component-by-component exergy efficiency, which builds on the decomposition of the exergy ows at the level...... the highest performance (29.6%). A more realistic measure of the technical potential for improving these systems can be carried out by splitting further the exergy destruction into its avoidable and unavoidable parts....

  7. Information Decomposition in Multivariate Systems: Definitions, Implementation and Application to Cardiovascular Networks

    Directory of Open Access Journals (Sweden)

    Luca Faes

    2016-12-01

    Full Text Available The continuously growing framework of information dynamics encompasses a set of tools, rooted in information theory and statistical physics, which allow to quantify different aspects of the statistical structure of multivariate processes reflecting the temporal dynamics of complex networks. Building on the most recent developments in this field, this work designs a complete approach to dissect the information carried by the target of a network of multiple interacting systems into the new information produced by the system, the information stored in the system, and the information transferred to it from the other systems; information storage and transfer are then further decomposed into amounts eliciting the specific contribution of assigned source systems to the target dynamics, and amounts reflecting information modification through the balance between redundant and synergetic interaction between systems. These decompositions are formulated quantifying information either as the variance or as the entropy of the investigated processes, and their exact computation for the case of linear Gaussian processes is presented. The theoretical properties of the resulting measures are first investigated in simulations of vector autoregressive processes. Then, the measures are applied to assess information dynamics in cardiovascular networks from the variability series of heart period, systolic arterial pressure and respiratory activity measured in healthy subjects during supine rest, orthostatic stress, and mental stress. Our results document the importance of combining the assessment of information storage, transfer and modification to investigate common and complementary aspects of network dynamics; suggest the higher specificity to alterations in the network properties of the measures derived from the decompositions; and indicate that measures of information transfer and information modification are better assessed, respectively, through entropy

  8. SADE: system of acquisition of experimental data. Definition and analysis of an experiment description language

    International Nuclear Information System (INIS)

    Gagniere, Jean-Michel

    1983-01-01

    This research thesis presents a computer system for the acquisition of experimental data. It is aimed at acquiring, at processing and at storing information from particle detectors. The acquisition configuration is described by an experiment description language. The system comprises a lexical analyser, a syntactic analyser, a translator, and a data processing module. It also comprises a control language and a statistics management and plotting module. The translator builds up series of tables which allow, during an experiment, different sequences to be executed: experiment running, calculations to be performed on this data, building up of statistics. Short execution time and ease of use are always looked for [fr

  9. Systems Thinking and Systems-Based Practice Across the Health Professions: An Inquiry Into Definitions, Teaching Practices, and Assessment.

    Science.gov (United States)

    Plack, Margaret M; Goldman, Ellen F; Scott, Andrea R; Pintz, Christine; Herrmann, Debra; Kline, Kathleen; Thompson, Tracey; Brundage, Shelley B

    2018-01-01

    Phenomenon: Systems thinking is the cornerstone of systems-based practice (SBP) and a core competency in medicine and health sciences. Literature regarding how to teach or apply systems thinking in practice is limited. This study aimed to understand how educators in medicine, physical therapy, physician assistant, nursing, and speech-language pathology education programs teach and assess systems thinking and SBP. Twenty-six educators from seven different degree programs across the five professions were interviewed and program descriptions and relevant course syllabi were reviewed. Qualitative analysis was iterative and incorporated inductive and deductive methods as well as a constant comparison of units of data to identify patterns and themes. Six themes were identified: 1) participants described systems thinking as ranging across four major levels of healthcare (i.e., patient, care team, organization, and external environment); 2) participants associated systems thinking with a wide range of activities across the curriculum including quality improvement, Inter-professional education (IPE), error mitigation, and advocacy; 3) the need for healthcare professionals to understand systems thinking was primarily externally driven; 4) participants perceived that learning systems thinking occurred mainly informally and experientially rather than through formal didactic instruction; 5) participants characterized systems thinking content as interspersed across the curriculum and described a variety of strategies for teaching and assessing it; 6) participants indicated a structured framework and inter-professional approach may enhance teaching and assessment of systems thinking. Insights: Systems thinking means different things to different health professionals. Teaching and assessing systems thinking across the health professions will require further training and practice. Tools, techniques, taxonomies and expertise outside of healthcare may be used to enhance the teaching

  10. Preliminary definition of the remote handling system for the current IFMIF Test Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Queral, V., E-mail: vicentemanuel.queral@ciemat.es [Laboratorio Nacional de Fusion, EURATOM-CIEMAT, 28040 Madrid (Spain); Urbon, J. [Laboratorio Nacional de Fusion, EURATOM-CIEMAT, 28040 Madrid (Spain); Instituto de Fusion Nuclear, Universidad Politecnica de Madrid, 28006 Madrid (Spain); Garcia, A.; Cuarental, I.; Mota, F. [Laboratorio Nacional de Fusion, EURATOM-CIEMAT, 28040 Madrid (Spain); Micciche, G. [CR ENEA Brasimone, I-40035 Camugnano (BO) (Italy); Ibarra, A. [Laboratorio Nacional de Fusion, EURATOM-CIEMAT, 28040 Madrid (Spain); Rapisarda, D. [Laboratorio Nacional de Fusion, EURATOM-CIEMAT, 28040 Madrid (Spain); Instituto de Fusion Nuclear, Universidad Politecnica de Madrid, 28006 Madrid (Spain); Casal, N. [Laboratorio Nacional de Fusion, EURATOM-CIEMAT, 28040 Madrid (Spain)

    2011-10-15

    A coherent design of the remote handling system with the design of the components to be manipulated is vital for reliable, safe and fast maintenance, having a decisive impact on availability, occupational exposures and operational cost of the facility. Highly activated components in the IFMIF facility are found at the Test Cell, a shielded pit where the samples are accurately located. The remote handling system for the Test Cell reference design was outlined in some past IFMIF studies. Currently a new preliminary design of the Test Cell in the IFMIF facility is being developed, introducing important modifications with respect to the reference one. This recent design separates the previous Vertical Test Assemblies in three functional components: Test Modules, shielding plugs and conduits. Therefore, it is necessary to adapt the previous design of the remote handling system to the new maintenance procedures and requirements. This paper summarises such modifications of the remote handling system, in particular the assessment of the feasibility of a modified commercial multirope crane for the handling of the weighty shielding plugs for the new Test Cell and a quasi-commercial grapple for the handling of the new Test Modules.

  11. CFM technologies for space transportation: Multipurpose hydrogen testbed system definition and tank procurement

    Science.gov (United States)

    Fox, E. C.; Kiefel, E. R.; Mcintosh, G. L.; Sharpe, J. B.; Sheahan, D. R.; Wakefield, M. E.

    1993-01-01

    The development of a test bed tank and system for evaluating cryogenic fluid management technologies in a simulated upper stage liquid hydrogen tank is covered. The tank is 10 ft long and is 10 ft in diameter, and is an ASME certified tank constructed of 5083 aluminum. The tank is insulated with a combination of sprayed on foam insulation, covered by 45 layers of double aluminized mylar separated by dacron net. The mylar is applied by a continuous wrap system adapted from commercial applications, and incorporates variable spacing between the mylar to provide more space between those layers having a high delta temperature, which minimizes heat leak. It also incorporates a unique venting system which uses fewer large holes in the mylar rather than the multitude of small holes used conventionally. This significantly reduces radiation heat transfer. The test bed consists of an existing vacuum chamber at MSFC, the test bed tank and its thermal control system, and a thermal shroud (which may be heated) surrounding the tank. Provisions are made in the tank and chamber for inclusion of a variety of cryogenic fluid management experiments.

  12. An evaluation model for the definition of regulatory requirements on spent fuel pool cooling systems

    International Nuclear Information System (INIS)

    Izquierdo, J.M.

    1979-01-01

    A calculation model is presented for establishing regulatory requirements in the SFPCS System. The major design factors, regulatory and design limits and key parameters are discussed. A regulatory position for internal use is proposed. Finally, associated problems and experience are presented. (author)

  13. Standardisation of command and control systems and simulator interfaces, and the definition of scenarios

    CSIR Research Space (South Africa)

    Naidoo, S

    2007-07-01

    Full Text Available of the Simulation Interoperability Standards Organization (SISO) in this area and the applicability to South Africa. It specifically addresses Battle Management Language (BML) as a means to establish a common operational picture between C2 systems and simulators...

  14. Preliminary definition of the remote handling system for the current IFMIF Test Facilities

    International Nuclear Information System (INIS)

    Queral, V.; Urbon, J.; Garcia, A.; Cuarental, I.; Mota, F.; Micciche, G.; Ibarra, A.; Rapisarda, D.; Casal, N.

    2011-01-01

    A coherent design of the remote handling system with the design of the components to be manipulated is vital for reliable, safe and fast maintenance, having a decisive impact on availability, occupational exposures and operational cost of the facility. Highly activated components in the IFMIF facility are found at the Test Cell, a shielded pit where the samples are accurately located. The remote handling system for the Test Cell reference design was outlined in some past IFMIF studies. Currently a new preliminary design of the Test Cell in the IFMIF facility is being developed, introducing important modifications with respect to the reference one. This recent design separates the previous Vertical Test Assemblies in three functional components: Test Modules, shielding plugs and conduits. Therefore, it is necessary to adapt the previous design of the remote handling system to the new maintenance procedures and requirements. This paper summarises such modifications of the remote handling system, in particular the assessment of the feasibility of a modified commercial multirope crane for the handling of the weighty shielding plugs for the new Test Cell and a quasi-commercial grapple for the handling of the new Test Modules.

  15. LD Definition.

    Science.gov (United States)

    Learning Disability Quarterly, 1987

    1987-01-01

    The position paper (1981) of the National Joint Committee on Learning Disabilities presents a revised definition of learning disabilities and identifies issues and concerns (such as the limitation to children and the exclusion clause) associated with the definition included in P.L. 94-142, the Education for All Handicapped Children Act. (DB)

  16. San Juan National Forest Land Management Planning Support System (LMPSS) requirements definition

    Science.gov (United States)

    Werth, L. F. (Principal Investigator)

    1981-01-01

    The role of remote sensing data as it relates to a three-component land management planning system (geographic information, data base management, and planning model) can be understood only when user requirements are known. Personnel at the San Juan National Forest in southwestern Colorado were interviewed to determine data needs for managing and monitoring timber, rangelands, wildlife, fisheries, soils, water, geology and recreation facilities. While all the information required for land management planning cannot be obtained using remote sensing techniques, valuable information can be provided for the geographic information system. A wide range of sensors such as small and large format cameras, synthetic aperture radar, and LANDSAT data should be utilized. Because of the detail and accuracy required, high altitude color infrared photography should serve as the baseline data base and be supplemented and updated with data from the other sensors.

  17. Definition of Pluviometric Thresholds For A Real Time Flood Forecasting System In The Arno Watershed

    Science.gov (United States)

    Amadio, P.; Mancini, M.; Mazzetti, P.; Menduni, G.; Nativi, S.; Rabuffetti, D.; Ravazzani, G.; Rosso, R.

    The pluviometric flood forecasting thresholds are an easy method that helps river flood emergency management collecting data from limited area meteorologic model or telemetric raingauges. The thresholds represent the cumulated rainfall depth which generate critic discharge for a particular section. The thresholds were calculated for different sections of Arno river and for different antecedent moisture condition using the flood event distributed hydrologic model FEST. The model inputs were syntethic hietographs with different shape and duration. The system realibility has been verified by generating 500 year syntethic rainfall for 3 important subwatersheds of the studied area. A new technique to consider spatial variability of rainfall and soil properties effects on hydrograph has been investigated. The "Geomorphologic Weights" were so calculated. The alarm system has been implemented in a dedicated software (MIMI) that gets measured and forecast rainfall data from Autorità di Bacino and defines the state of the alert of the river sections.

  18. The conceptual definition of a crisis management decision support system CMDSS

    Energy Technology Data Exchange (ETDEWEB)

    Schenker-Wicki, A G.M.

    1990-01-01

    The Institute for Automation and Operations Research at the University of Fribourg has been charged by the Swiss government to design a concept for a Crisis Management Decision Support System CMDSS to evaluate acceptable countermeasures to reduce ingestion dose after an accidental release of radioactivity and to implement a prototype. The study is divided in two parts. In the first part all the necessary modules and techniques for efficient decision making, based on the most recent developments in decision theory, as well as the necessary structuring of the decision making process are discussed, while in the second part the plausibility of the evaluated system is tested using a case study. For the time being no empirical research has been carried out. The decision making concept presented in this book comprehends decision making on two different levels, a technical and a political one. The division of decision power corresponds to the Swiss legal prescriptions for accidental release of radioactivity. To guarantee decisions of high quality, as many countermeasures as possible have to be presented to the decision makers. Due to the difficulty of evaluating all the possible countermeasures an expert-system is provided for the decision makers to generate the space of alternatives. The use of an expert-system should further help to reduce systematically the huge amount of information which is characteristic in crises situations. To support the comparison and ranking of the different alternatives a multi-criteria approach, the PROMETHEE method, which is based upon outranking relationships, is used. Due to the complexity of the decision making process, its poorly defined mathematical context and the unwillingness of the decision makers to use a method which requires defined substitution rates, decision methods based on utility theory will not be applied in this study. (Abstract Truncated)

  19. Definition of an automatic information retrieval system independent from the data base used

    International Nuclear Information System (INIS)

    Cunha, E.R.

    1983-04-01

    A bibliographic information retrieval system using data stored at the standardized interchange format ISO 2709 or ANSI Z39.2, is specified. A set of comands for interchange format manipulation wich allows the data access at the logical level, achieving the data independence, are used. A data base description language, a storage structure and data base manipulation comands are specified, using retrieval techniques which consider the applications needs. (Author) [pt

  20. The conceptual definition of a crisis management decision support system CMDSS

    International Nuclear Information System (INIS)

    Schenker-Wicki, A.G.M.

    1990-01-01

    The Institute for Automation and Operations Research at the University of Fribourg has been charged by the Swiss government to design a concept for a Crisis Management Decision Support System CMDSS to evaluate acceptable countermeasures to reduce ingestion dose after an accidental release of radioactivity and to implement a prototype. The study is divided in two parts. In the first part all the necessary modules and techniques for efficient decision making, based on the most recent developments in decision theory, as well as the necessary structuring of the decision making process are discussed, while in the second part the plausibility of the evaluated system is tested using a case study. For the time being no empirical research has been carried out. The decision making concept presented in this book comprehends decision making on two different levels, a technical and a political one. The division of decision power corresponds to the Swiss legal prescriptions for accidental release of radioactivity. To guarantee decisions of high quality, as many countermeasures as possible have to be presented to the decision makers. Due to the difficulty of evaluating all the possible countermeasures an expert-system is provided for the decision makers to generate the space of alternatives. The use of an expert-system should further help to reduce systematically the huge amount of information which is characteristic in crises situations. To support the comparison and ranking of the different alternatives a multi-criteria approach, the PROMETHEE method, which is based upon outranking relationships, is used. Due to the complexity of the decision making process, its poorly defined mathematical context and the unwillingness of the decision makers to use a method which requires defined substitution rates, decision methods based on utility theory will not be applied in this study. The outranking approach presented in this book provides its users with more transparent and intelligible

  1. [Patients' intervention in a therapeutic education program dedicated to systemic lupus: definitions, setting and benefits].

    Science.gov (United States)

    Hervier, B; Magar, Y; Allab, F; Richard, K; Neves, Y; Danjou, S; Amoura, Z; Ayçaguer, S

    2015-10-01

    Though recommended, participation of patients with specific expertise in therapeutic education programs (TEP) is rare. This work reports the experience of a national reference centre for rare systemic diseases. Involvement of "expert patients" (EP) has been planned from the development of a TEP dedicated to systemic lupus: patients' roles and required expertise have been defined and linked to the pedagogical tools. Such patients have been recruited during individual interviews and called to participate to specific pedagogical training. EP intervention have been evaluated by questionnaire to EP and health care providers. Three EP's functions have been identified: sharing experiences, giving "tips and tricks" and promoting dialogue. EP's interventions has been organised into a hierarchy (from sharing to co-animation). Among 298 patients enrolled in the TEP, 25 (8.4%) have been identified as possible EP. Eight of them (32%) benefited from a specific training of 12 hours. Among these patients, two (25%) regularly participate to the education sessions. For EP as well as for health care providers, EP's intervention seems beneficial (visual scale scores of 7.5 and 9.5, respectively). Though difficult to organise, EP's intervention in TEP dedicated to rare systemic diseases seems useful and would earn to be increase. Copyright © 2015 Société nationale française de médecine interne (SNFMI). Published by Elsevier SAS. All rights reserved.

  2. Modelling Titanic and Clash of Clans Games: Theoretical Definition and Application in Current Social Systems

    Directory of Open Access Journals (Sweden)

    Jan Mertl

    2017-12-01

    Full Text Available This article develops research into Titanic games and the associated concepts anchored in game theory. It defines the conditions under which a Titanic game transitions into a Clash of Clans game and discusses the degree of punishment and its consequences for the nature of the game and the positions of the individual players. The game is analysed in significant detail, clearly showing what happens when diff erent strategies are chosen. At the same time, the article also looks at the context of social policy and social systems, where the application of the analysed games is very beneficial, and points to the example of the situation in the Czech health insurance system between 2000 and 2010. The identification of the proposed concepts and their possible existence in socio-economic reality enables us to substantially better see what games are being played or can be played, and as such to gain an understanding of what is happening. The article shows the diff erences between Titanic and Clash of Clans games and their possible application in current social systems.

  3. Large Deployable Reflector (LDR) system concept and technology definition study. Volume 1: Executive summary, analyses and trades, and system concepts

    Science.gov (United States)

    Agnew, Donald L.; Jones, Peter A.

    1989-01-01

    A study was conducted to define reasonable and representative large deployable reflector (LDR) system concepts for the purpose of defining a technology development program aimed at providing the requisite technological capability necessary to start LDR development by the end of 1991. This volume includes the executive summary for the total study, a report of thirteen system analysis and trades tasks (optical configuration, aperture size, reflector material, segmented mirror, optical subsystem, thermal, pointing and control, transportation to orbit, structures, contamination control, orbital parameters, orbital environment, and spacecraft functions), and descriptions of three selected LDR system concepts. Supporting information is contained in appendices.

  4. Databases in welding engineering - definition and starting phase of the integrated welding engineering information system

    International Nuclear Information System (INIS)

    Barthelmess, H.; Queren, W.; Stracke, M.

    1989-01-01

    The structure and function of the Information AAssociation for Welding Engineering, newly established by the Deutscher Verband fuer Schweisstechnik, are presented. Examined are: special literature for welding techniques - value and prospects; databases accessible to the public for information on welding techniques; concept for the Information Association for Welding Engineering; the four phases to establish databasis for facts and expert systems of the Information Association for Welding Engineering; the pilot project 'MVT-Data base' (hot crack data base for data of modified varestraint-transvarestraint tests). (orig./MM) [de

  5. Conceptual definition of a 50-100 kWe NEP system for planetary science missions

    Science.gov (United States)

    Friedlander, Alan

    1993-01-01

    The Phase 1 objective of this project is to assess the applicability of a common Nuclear Electric Propulsion (NEP) flight system of the 50-100 kWe power class to meet the advanced transportation requirements of a suite of planetary science (robotic) missions, accounting for differences in mission-specific payloads and delivery requirements. The candidate missions are as follows: (1) Comet Nucleus Sample Return; (2) Multiple Mainbelt Asteroid Rendezvous; (3) Jupiter Grand Tour (Galilean satellites and magnetosphere); (4) Uranus Orbiter/Probe (atmospheric entry and landers); (5) Neptune Orbiter/Probe (atmospheric entry and landers); and (6) Pluto-Charon Orbiter/Lander. The discussion is presented in vugraph form.

  6. Autonomous Integrated Receive System (AIRS) requirements definition. Volume 4: Functional specification for the prototype Automated Integrated Receive System (AIRS)

    Science.gov (United States)

    Chie, C. M.

    1984-01-01

    The functional requirements for the performance, design, and testing for the prototype Automated Integrated Receive System (AIRS) to be demonstrated for the TDRSS S-Band Single Access Return Link are presented.

  7. Systems Biology Markup Language (SBML Level 2 Version 5: Structures and Facilities for Model Definitions

    Directory of Open Access Journals (Sweden)

    Hucka Michael

    2015-06-01

    Full Text Available Computational models can help researchers to interpret data, understand biological function, and make quantitative predictions. The Systems Biology Markup Language (SBML is a file format for representing computational models in a declarative form that can be exchanged between different software systems. SBML is oriented towards describing biological processes of the sort common in research on a number of topics, including metabolic pathways, cell signaling pathways, and many others. By supporting SBML as an input/output format, different tools can all operate on an identical representation of a model, removing opportunities for translation errors and assuring a common starting point for analyses and simulations. This document provides the specification for Version 5 of SBML Level 2. The specification defines the data structures prescribed by SBML as well as their encoding in XML, the eXtensible Markup Language. This specification also defines validation rules that determine the validity of an SBML document, and provides many examples of models in SBML form. Other materials and software are available from the SBML project web site, http://sbml.org/.

  8. Systems Biology Markup Language (SBML) Level 2 Version 5: Structures and Facilities for Model Definitions.

    Science.gov (United States)

    Hucka, Michael; Bergmann, Frank T; Dräger, Andreas; Hoops, Stefan; Keating, Sarah M; Le Novère, Nicolas; Myers, Chris J; Olivier, Brett G; Sahle, Sven; Schaff, James C; Smith, Lucian P; Waltemath, Dagmar; Wilkinson, Darren J

    2015-09-04

    Computational models can help researchers to interpret data, understand biological function, and make quantitative predictions. The Systems Biology Markup Language (SBML) is a file format for representing computational models in a declarative form that can be exchanged between different software systems. SBML is oriented towards describing biological processes of the sort common in research on a number of topics, including metabolic pathways, cell signaling pathways, and many others. By supporting SBML as an input/output format, different tools can all operate on an identical representation of a model, removing opportunities for translation errors and assuring a common starting point for analyses and simulations. This document provides the specification for Version 5 of SBML Level 2. The specification defines the data structures prescribed by SBML as well as their encoding in XML, the eXtensible Markup Language. This specification also defines validation rules that determine the validity of an SBML document, and provides many examples of models in SBML form. Other materials and software are available from the SBML project web site, http://sbml.org.

  9. Solving problems in social-ecological systems: definition, practice and barriers of transdisciplinary research.

    Science.gov (United States)

    Angelstam, Per; Andersson, Kjell; Annerstedt, Matilda; Axelsson, Robert; Elbakidze, Marine; Garrido, Pablo; Grahn, Patrik; Jönsson, K Ingemar; Pedersen, Simen; Schlyter, Peter; Skärbäck, Erik; Smith, Mike; Stjernquist, Ingrid

    2013-03-01

    Translating policies about sustainable development as a social process and sustainability outcomes into the real world of social-ecological systems involves several challenges. Hence, research policies advocate improved innovative problem-solving capacity. One approach is transdisciplinary research that integrates research disciplines, as well as researchers and practitioners. Drawing upon 14 experiences of problem-solving, we used group modeling to map perceived barriers and bridges for researchers' and practitioners' joint knowledge production and learning towards transdisciplinary research. The analysis indicated that the transdisciplinary research process is influenced by (1) the amount of traditional disciplinary formal and informal control, (2) adaptation of project applications to fill the transdisciplinary research agenda, (3) stakeholder participation, and (4) functional team building/development based on self-reflection and experienced leadership. Focusing on implementation of green infrastructure policy as a common denominator for the delivery of ecosystem services and human well-being, we discuss how to diagnose social-ecological systems, and use knowledge production and collaborative learning as treatments.

  10. Simplicity of condensed matter at its core: generic definition of a Roskilde-simple system.

    Science.gov (United States)

    Schrøder, Thomas B; Dyre, Jeppe C

    2014-11-28

    The isomorph theory is reformulated by defining Roskilde-simple systems by the property that the order of the potential energies of configurations at one density is maintained when these are scaled uniformly to a different density. If the potential energy as a function of all particle coordinates is denoted by U(R), this requirement translates into U(Ra) < U(Rb) ⇒ U(λRa) < U(λRb). Isomorphs remain curves in the thermodynamic phase diagram along which structure, dynamics, and excess entropy are invariant, implying that the phase diagram is effectively one-dimensional with respect to many reduced-unit properties. In contrast to the original formulation of the isomorph theory, however, the density-scaling exponent is not exclusively a function of density and the isochoric heat capacity is not an exact isomorph invariant. A prediction is given for the latter quantity's variation along the isomorphs. Molecular dynamics simulations of the Lennard-Jones and Lennard-Jones Gaussian systems validate the new approach.

  11. Assistance tools for generic definition of ITER maintenance tasks and scenarios in advanced supervisory control systems

    International Nuclear Information System (INIS)

    Zieba, Stéphane; Russotto, François-Xavier; Da Silva Simoes, Max; Measson, Yvan

    2013-01-01

    Highlights: ► Improve supervisory control systems for ITER in-vessel and hot cell maintenance. ► Optimize remote handling operations effectiveness, reliability and safety. ► Provide a generic description of the maintenance tasks and scenarios. ► Development of context-based assistances for operators and supervisor. ► Improvement of operator's situation awareness. -- Abstract: This paper concerns the improvement of supervisory control systems in the context of remote handling for the maintenance tasks in ITER. This work aims at providing a single formalism and tools to define in a generic way the ITER maintenance tasks and scenarios for in-vessel and hot cell operations. A three-layered approach is proposed to model these tasks and scenarios. Physical actions are defined for the scene elements. From these physical actions, behaviours are defined to represent high-level functionalities. Finally, interaction modes define the way that behaviours are achieved in terms of human–machine interactions. Case study concerning the blanket maintenance procedure is discussed concerning the contributions of the descriptive model and the context-based assistances to the activities of supervisory control

  12. 48 CFR 2402.101 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... GENERAL DEFINITIONS OF WORDS AND TERMS Definitions 2402.101 Definitions. Accounting Office means the Office of Accounting Operations within the Office of the Chief Financial Officer and includes that Office... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Definitions. 2402.101...

  13. Proportional wire chamber system for beam definition in precision total cross section measurements

    International Nuclear Information System (INIS)

    Carroll, A.S.; Chiang, I.H.; Kycia, T.F.

    1978-03-01

    A PWC system was developed and extensively used in precision measurements of total cross sections at low momenta (0.4 to 1.1 GeV/c) and at high momenta (23 to 370 GeV/c). This ''electronic collimator'' operated simultaneously in a fast (250 nsec) decision making mode, and a slower (0.5 msec) readout mode. The decision making mode utilized adjustable hard-wired logic to define acceptable incident beam trajectories and reject multiple beam tracks. A sample of the events were read into an on-line computer for beam tuning, for chamber diagnostics, and for study of the effect of small angle scattering to verify the total cross section extrapolation procedure

  14. A proportional wire chamber system for beam definition in precision total cross section measurements

    International Nuclear Information System (INIS)

    Carroll, A.S.; Chiang, I.-H.; Kycia, T.F.; Li, K.K.; Mazur, P.O.; Michael, D.N.; Mockett, P.M.; Rahm, D.C.; Rubinstein, R.; Eartly, D.P.; Wehmann, A.A.

    1978-01-01

    The authors have developed and extensively used a PWC system in precision measurements of total cross sections at low momenta (0.4-1.1 GeV/c) and at high momenta (23-370 GeV/c). This 'electronic collimator' operated simultaneously in a fast (250 ns) decision making mode, and a slower (0.5 ms) readout mode. The decision making mode utilized adjustable hardwired logic to define acceptable incident beam trajectories and reject multiple beam tracks. A sample of the events was read into an on-line computer for beam tuning, for chamber diagnostics, and for study of the effect of small angle scattering to verify the total cross section extrapolation procedure. (Auth.)

  15. On the definition of neutron lifetimes in multiplying and non-multiplying systems

    International Nuclear Information System (INIS)

    Spriggs, G.D.; Adams, K.J.; Parsons, D.K.

    1997-01-01

    Historically, the term neutron lifetime has been used in the literature to describe a wide variety of different time intervals associated with a neutron's trek through a given system. This duplication of usage of the term neutron lifetime has undoubtedly resulted in some confusion concerning its physical meaning. In hopes of reducing some of this confusion, we suggest in this work that the various time intervals characterizing the life of a neutron be divided into three general categories: (1) neutron lifespans, (2) reaction rate lifetimes, and (3) neutron generation times. In this report, we define these three different time intervals and give deterministic and Monte Carlo transport expressions that can be used to calculate them

  16. Data capture and communication during transfers to definitive care in an inclusive trauma system.

    Science.gov (United States)

    Bradley, Nori L; Garraway, Naisan; Bell, Nathaniel; Lakha, Nasira; Hameed, S Morad

    2017-05-01

    Background trauma survivors in rural areas transferred to urban centers have higher mortality than trauma patients admitted directly to urban centers. Transfer data in trauma registries is important for injury control. Prehospital and early physiologic data may reflect processes of pre-hospital care. British Columbia currently has no standardized process for trauma patient data transfer. We performed a retrospective data analysis for major trauma patients (ISS>15) transferred to a Level I trauma center over a 1year period (n=243). Completion rates of paramedic form and ATLS primary survey variables were extracted. Nominal and interval descriptives were calculated. Documentation rates were considered deficient at system-wide information transfer. Copyright © 2016. Published by Elsevier Ltd.

  17. Environment and Urban Tourism: AN Emergent System in Rhetorical Place Identity Definitions

    Science.gov (United States)

    Mura, Marina

    Within the systemic framework of Environmental Psychology (Bechtel and Churchman, 2002) and following Urry (2002) and Pearce's approaches (2005), the aim of this research is to investigate within the context of urban tourism which world views emerge from a Discourse Analysis (Edwards, Potter, 1993). of the speech of native and non-native Sardinian residents. It addresses the issue of how social-physical diversity might be preserved (the problem of tourism sustainability, Di Castri, Balaji, 2002). In this regard, forty in-depth narrative interviews of inhabitants with short- and long-term residential experience in Cagliari (Italy) were conducted and examined (Discourse Analysis). It was found that the native and non-native's rhetorical devices expressed similar representations of urban places, but in diverse relationship to social and place identity. Their environmental transitions were based on the tourist gaze, or the functional view and heritage pride. This displays some basic central dimensions of sustainable tourism.

  18. Goal Definition

    DEFF Research Database (Denmark)

    Bjørn, Anders; Laurent, Alexis; Owsianiak, Mikołaj

    2018-01-01

    The goal definition is the first phase of an LCA and determines the purpose of a study in detail. This chapter teaches how to perform the six aspects of a goal definition: (1) Intended applications of the results, (2) Limitations due to methodological choices, (3) Decision context and reasons...... for carrying out the study, (4) Target audience , (5) Comparative studies to be disclosed to the public and (6) Commissioner of the study and other influential actors. The instructions address both the conduct and reporting of a goal definition and are largely based on the ILCD guidance document (EC...

  19. Feed-forward adaptive system for vibration and sound radiation reduction phase I: architecture, definition, and specifications

    Science.gov (United States)

    Concilio, Antonio; De Vivo, Luciano; Quaranta, V.

    1998-06-01

    Noise emission suppression problem is more and more absorbing mechanical designers' efforts, in the recent times. It is not only a matter of comfort, but also of people exposure noise limits. A significant step has been moved in Europe with the issue of the EU Green Paper: Future Noise Policy. Impact on external and internal environment is requested to be considered in industrial and civil design. Low frequency disturbances are hard to be treated by classical passive methods. Active noise control presents great potentialities. In the last years, significant improvements have been attained in the field of interior acoustics, with particular reference to aircraft. Microphones and loudspeakers - based active systems have been put on the market, while interesting alternatives have been proved to be effective, implementing Smart Materials and Structures related concepts. The authors of this paper and of its continuation have been working for a long time inside the themes related to the noise control in aircraft cabins. Thin-walled beams have a certain importance; they are representative of fuselage range. This document deals with the design and the specifications definition, concerning a system addressed to the minimization of the vibration level of, or the sound power level radiated by , a general structure; in the specific case, a thin-walled beam was selected as test article, fully representative of general complex elements. The structure is identified and characterized through its experimental response. The set-up for the active control measurements is then described in detail; the acquired transfer functions have been elaborated to predict the performance of the real active control system.

  20. Definition of an auxiliary processor dedicated to real-time operating system kernels

    Science.gov (United States)

    Halang, Wolfgang A.

    1988-01-01

    In order to increase the efficiency of process control data processing, it is necessary to enhance the productivity of real time high level languages and to automate the task administration, because presently 60 percent or more of the applications are still programmed in assembly languages. This may be achieved by migrating apt functions for the support of process control oriented languages into the hardware, i.e., by new architectures. Whereas numerous high level languages have already been defined or realized, there are no investigations yet on hardware assisted implementation of real time features. The requirements to be fulfilled by languages and operating systems in hard real time environment are summarized. A comparison of the most prominent languages, viz. Ada, HAL/S, LTR, Pearl, as well as the real time extensions of FORTRAN and PL/1, reveals how existing languages meet these demands and which features still need to be incorporated to enable the development of reliable software with predictable program behavior, thus making it possible to carry out a technical safety approval. Accordingly, Pearl proved to be the closest match to the mentioned requirements.

  1. The development of test beds to support the definition and evolution of the Space Station Freedom power system

    Science.gov (United States)

    Soeder, James F.; Frye, Robert J.; Phillips, Rudy L.

    1991-01-01

    Since the beginning of the Space Station Freedom Program (SSFP), the NASA Lewis Research Center (LeRC) and the Rocketdyne Division of Rockwell International have had extensive efforts underway to develop testbeds to support the definition of the detailed electrical power system design. Because of the extensive redirections that have taken place in the Space Station Freedom Program in the past several years, the test bed effort was forced to accommodate a large number of changes. A short history of these program changes and their impact on the LeRC test beds is presented to understand how the current test bed configuration has evolved. The current test objectives and the development approach for the current DC test bed are discussed. A description of the test bed configuration, along with its power and controller hardware and its software components, is presented. Next, the uses of the test bed during the mature design and verification phase of SSFP are examined. Finally, the uses of the test bed in the operation and evolution of the SSF are addressed.

  2. Requirements analysis notebook for the flight data systems definition in the Real-Time Systems Engineering Laboratory (RSEL)

    Science.gov (United States)

    Wray, Richard B.

    1991-01-01

    A hybrid requirements analysis methodology was developed, based on the practices actually used in developing a Space Generic Open Avionics Architecture. During the development of this avionics architecture, a method of analysis able to effectively define the requirements for this space avionics architecture was developed. In this methodology, external interfaces and relationships are defined, a static analysis resulting in a static avionics model was developed, operating concepts for simulating the requirements were put together, and a dynamic analysis of the execution needs for the dynamic model operation was planned. The systems engineering approach was used to perform a top down modified structured analysis of a generic space avionics system and to convert actual program results into generic requirements. CASE tools were used to model the analyzed system and automatically generate specifications describing the model's requirements. Lessons learned in the use of CASE tools, the architecture, and the design of the Space Generic Avionics model were established, and a methodology notebook was prepared for NASA. The weaknesses of standard real-time methodologies for practicing systems engineering, such as Structured Analysis and Object Oriented Analysis, were identified.

  3. Requirements analysis notebook for the flight data systems definition in the Real-Time Systems Engineering Laboratory (RSEL)

    Science.gov (United States)

    Wray, Richard B.

    1991-12-01

    A hybrid requirements analysis methodology was developed, based on the practices actually used in developing a Space Generic Open Avionics Architecture. During the development of this avionics architecture, a method of analysis able to effectively define the requirements for this space avionics architecture was developed. In this methodology, external interfaces and relationships are defined, a static analysis resulting in a static avionics model was developed, operating concepts for simulating the requirements were put together, and a dynamic analysis of the execution needs for the dynamic model operation was planned. The systems engineering approach was used to perform a top down modified structured analysis of a generic space avionics system and to convert actual program results into generic requirements. CASE tools were used to model the analyzed system and automatically generate specifications describing the model's requirements. Lessons learned in the use of CASE tools, the architecture, and the design of the Space Generic Avionics model were established, and a methodology notebook was prepared for NASA. The weaknesses of standard real-time methodologies for practicing systems engineering, such as Structured Analysis and Object Oriented Analysis, were identified.

  4. Integrated geographic information systems (IGIS) analysis and definition of the tectonic framework of northern Mexico

    Science.gov (United States)

    Martinez Pina, Carlos Manuel

    Crustal rupture structures reactivated in the course of the tectonic history of northern Mexico are the surface expressions of planes of weakness, in the form of simple or composite rectilinear features or slightly curved, defined as lineaments. Unless otherwise defined as strike-slip faults, lineaments are part of parallel and sub-parallel oblique convergent or oblique divergent tectonic zones cross cutting the Sierra Madre Occidental and northern Mexico, in a NW trend. These shear zones are the response to the oblique subduction of the Farallon plate beneath North America. Kinematic analysis of five selected sites in northern Mexico, three basins and two compressional shear zones, proved possible a combination of shear mechanism diagram and models from analogue materials, with satellite imagery and geographic information systems, as an aid to define strike-slip fault motion. This was done using a reverse engineering process by comparing geometries. One of the sites assessed, involving the Parras Basin, Coahuila Block (CB), San Marcos fault, a postulated PBF-1 fault, allowed for palinpastic reconstruction of the CB that corroborated the results of the vector motion defined, in addition to an extension of ˜25% in a northwest southeast direction. A GIS-based compilation and georeferenced regional structural studies by several researchers were used as ground control areas (GCA); their interpolation and interpretation, resulted in a tectonic framework map of northern Mexico. In addition, shaded relief models overlaid by the lineaments / fault layer allowed structural analyses of basins related to these major structures. Two important results were obtained from this study: the Tepehuanes-San Luis-fault (TSL) and the Guadalupe fault, named herein, displaces the Villa de Reyes graben, and the Aguascalientes graben, respectively, to the SE, confirming their left lateral vector motion; afterwards TSL was displaced south by the right lateral strike slip Taxco-San Miguel de

  5. Macaque accessory optic system: I. Definition of the medial terminal nucleus

    International Nuclear Information System (INIS)

    Cooper, H.M.; Baleydier, C.; Magnin, M.

    1990-01-01

    The organization of the accessory optic system (AOS) has been studied in the macaque monkey following intravitreal injections of tritiated amino acids in one eye. Retinal projections to the dorsal (DTN) and the lateral (LTN) terminal nuclei are identical to those previously described in other primate species. We observed an additional group of retinorecipient cells of the AOS, located between the cerebral peduncle and the substantia nigra, which we define as the interstitial nucleus of the superior fasiculus, medial fibers. In this report, we focus our attention on the medial terminal nucleus (MTN). Although a ventral division of this nucleus (MTNv) was not observed in the macaque, the retina projects to a group of cells in the midbrain reticular formation (MRF), which we argue to be homologous to the dorsal division of the MTN (MTNd). To provide evidence in support of this homology, the retinal projection to the MTNv and MTNd was also examined in 21 additional species from 11 orders of mammals including carnivores, marsupials, lagomorphs, rodents, bats, insectivores, tree shrews, hyraxes, pholidotes, edentates, and five additional species of primates. Whereas the retina projects to both ventral and dorsal divisions in all species studied, in haplorhine primates only the projection to the MTNd is conserved. The relative topological position of the MTNd in the MRF, dorsomedial to the substantia nigra and ventrolateral to the red nucleus, remains constant throughout the mammals. The trajectory of fiber paths innervating the MTNd is also similar in all species. In addition, the MTNd has comparable afferent and efferent connections with retina, pretectum, and vestibular nuclei in all species thus far studied. These results support the unequivocal conclusion that the MTNd is an unvarying feature of the mammalian AOS

  6. FURTHER DEFINITION OF THE MASS-METALLICITY RELATION IN GLOBULAR CLUSTER SYSTEMS AROUND BRIGHTEST CLUSTER GALAXIES

    International Nuclear Information System (INIS)

    Cockcroft, Robert; Harris, William E.; Wehner, Elizabeth M. H.; Whitmore, Bradley C.; Rothberg, Barry

    2009-01-01

    We combine the globular cluster (GC) data for 15 brightest cluster galaxies and use this material to trace the mass-metallicity relations (MMRs) in their globular cluster systems (GCSs). This work extends previous studies which correlate the properties of the MMR with those of the host galaxy. Our combined data sets show a mean trend for the metal-poor subpopulation that corresponds to a scaling of heavy-element abundance with cluster mass Z ∼ M 0.30±0.05 . No trend is seen for the metal-rich subpopulation which has a scaling relation that is consistent with zero. We also find that the scaling exponent is independent of the GCS specific frequency and host galaxy luminosity, except perhaps for dwarf galaxies. We present new photometry in (g',i') obtained with Gemini/GMOS for the GC populations around the southern giant ellipticals NGC 5193 and IC 4329. Both galaxies have rich cluster populations which show up as normal, bimodal sequences in the color-magnitude diagram. We test the observed MMRs and argue that they are statistically real, and not an artifact caused by the method we used. We also argue against asymmetric contamination causing the observed MMR as our mean results are no different from other contamination-free studies. Finally, we compare our method to the standard bimodal fitting method (KMM or RMIX) and find our results are consistent. Interpretation of these results is consistent with recent models for GC formation in which the MMR is determined by GC self-enrichment during their brief formation period.

  7. The impact of natural hazard on critical infrastructure systems: definition of an ontology

    Science.gov (United States)

    Dimauro, Carmelo; Bouchon, Sara; Frattini, Paolo; Giusto, Claudia

    2013-04-01

    According to the Council of the European Union Directive (2008), 'critical infrastructure' means an asset, system or part thereof which is essential for the maintenance of vital societal functions, health, safety, security, economic or social well-being of people, and the disruption or destruction of which would have a significant impact as a result of the failure to maintain those functions. Critical infrastructure networks are exposed to natural events, such as floods, storms, landslides, earthquakes, etc. Recent natural disasters show that socio-economic consequences can be very much aggravated by the impact on these infrastructures. Though, there is still a lack of a recognized approach or methodology to assess the vulnerability of critical infrastructure assets against natural threats. The difficulty to define such an approach is increased by the need to consider a very high number of natural events, which differ in nature, magnitude and probability, as well as the need to assess the vulnerability of a high variety of infrastructure assets (e.g. bridges, roads, tunnels, pipelines, etc.) To meet this challenge, the objective of the THREVI2 EU-CIPS project is to create a database linking the relationships between natural hazards and critical infrastructure assets. The query of the database will allow the end-users (critical infrastructure protection authorities and operators) to identify the relevant scenarios according to the own priorities and criteria. The database builds on an ontology optimized for the assessment of the impact of threats on critical infrastructures. The ontology aims at capturing the existing knowledge on natural hazards, critical infrastructures assets and their related vulnerabilities. Natural phenomena that can threaten critical infrastructures are classified as "events", and organized in a genetic-oriented hierarchy. The main attributes associated to each event are the probability, the magnitude and the "modus". The modus refers to the

  8. Can the Cancer-related Fatigue Case-definition Criteria Be Applied to Chronic Medical Illness? A Comparison between Breast Cancer and Systemic Sclerosis.

    Science.gov (United States)

    Kwakkenbos, Linda; Minton, Ollie; Stone, Patrick C; Alexander, Susanna; Baron, Murray; Hudson, Marie; Thombs, Brett D

    2015-07-01

    Fatigue is a crucial determinant of quality of life across rheumatic diseases, but the lack of agreed-upon standards for identifying clinically significant fatigue hinders research and clinical management. Case definition criteria for cancer-related fatigue were proposed for inclusion in the International Classification of Diseases. The objective was to evaluate whether the cancer-related fatigue case definition performed equivalently in women with breast cancer and systemic sclerosis (SSc) and could be used to identify patients with chronic illness-related fatigue. The cancer-related fatigue interview (case definition criteria met if ≥ 5 of 9 fatigue-related symptoms present with functional impairment) was completed by 291 women with SSc and 278 women successfully treated for breast cancer. Differential item functioning was assessed with the multiple indicator multiple cause model. Items 3 (concentration) and 10 (short-term memory) were endorsed significantly less often by women with SSc compared with cancer, controlling for responses on other items. Omitting these 2 items from the case definition and requiring 4 out of the 7 remaining symptoms resulted in a similar overall prevalence of cancer-related fatigue in the cancer sample compared with the original criteria (37.4% vs 37.8%, respectively), with 97.5% of patients diagnosed identically with both definitions. Prevalence of chronic illness-related fatigue was 36.1% in SSc using 4 of 7 symptoms. The cancer-related fatigue criteria can be used equivalently to identify patients with chronic illness-related fatigue when 2 cognitive fatigue symptoms are omitted. Harmonized definitions and measurement of clinically significant fatigue will advance research and clinical management of fatigue in rheumatic diseases and other conditions.

  9. Establishing consensus on the definition of an isolated hip fracture for trauma system performance evaluation: A systematic review

    Directory of Open Access Journals (Sweden)

    Judith Tiao

    2014-01-01

    Full Text Available Background: Risk-adjusted mortality is widely used to benchmark trauma center care. Patients presenting with isolated hip fractures (IHFs are usually excluded from these evaluations. However, there is no standardized definition of an IHF. We aimed to evaluate whether there is consensus on the definition of an IHF used as an exclusion criterion in studies evaluating the performance of trauma centers in terms of mortality. Materials and Methods: We conducted a systematic review of observational studies. We searched the electronic databases MEDLINE, EMBASE, BIOSIS, The Cochrane Library, CINAHL, TRIP Database, and PROQUEST for cohort studies that presented data on mortality to assess the performance of trauma centers and excluded IHF. A standardized, piloted data abstraction form was used to extract data on study settings, IHF definitions and methodological quality of included studies. Consensus was considered to be reached if more than 50% of studies used the same definition of IHF. Results: We identified 8,506 studies of which 11 were eligible for inclusion. Only two studies (18% used the same definition of an IHF. Three (27% used a definition based on Abbreviated Injury Scale (AIS Codes and five (45% on International Classification of Diseases (ICD codes. Four (36% studies had inclusion criteria based on age, five (45% on secondary injuries, and four (36% on the mechanism of injury. Eight studies (73% had good overall methodological quality. Conclusions: We observed important heterogeneity in the definition of an IHF used as an exclusion criterion in studies evaluating the performance of trauma centers. Consensus on a standardized definition is needed to improve the validity of evaluations of the quality of trauma care.

  10. A hierarchical 3D segmentation method and the definition of vertebral body coordinate systems for QCT of the lumbar spine.

    Science.gov (United States)

    Mastmeyer, André; Engelke, Klaus; Fuchs, Christina; Kalender, Willi A

    2006-08-01

    We have developed a new hierarchical 3D technique to segment the vertebral bodies in order to measure bone mineral density (BMD) with high trueness and precision in volumetric CT datasets. The hierarchical approach starts with a coarse separation of the individual vertebrae, applies a variety of techniques to segment the vertebral bodies with increasing detail and ends with the definition of an anatomic coordinate system for each vertebral body, relative to which up to 41 trabecular and cortical volumes of interest are positioned. In a pre-segmentation step constraints consisting of Boolean combinations of simple geometric shapes are determined that enclose each individual vertebral body. Bound by these constraints viscous deformable models are used to segment the main shape of the vertebral bodies. Volume growing and morphological operations then capture the fine details of the bone-soft tissue interface. In the volumes of interest bone mineral density and content are determined. In addition, in the segmented vertebral bodies geometric parameters such as volume or the length of the main axes of inertia can be measured. Intra- and inter-operator precision errors of the segmentation procedure were analyzed using existing clinical patient datasets. Results for segmented volume, BMD, and coordinate system position were below 2.0%, 0.6%, and 0.7%, respectively. Trueness was analyzed using phantom scans. The bias of the segmented volume was below 4%; for BMD it was below 1.5%. The long-term goal of this work is improved fracture prediction and patient monitoring in the field of osteoporosis. A true 3D segmentation also enables an accurate measurement of geometrical parameters that may augment the clinical value of a pure BMD analysis.

  11. Integrated Application of Active Controls (IAAC) technology to an advanced subsonic transport project: Current and advanced act control system definition study

    Science.gov (United States)

    1982-01-01

    The Current and Advanced Technology ACT control system definition tasks of the Integrated Application of Active Controls (IAAC) Technology project within the Energy Efficient Transport Program are summarized. The systems mechanize six active control functions: (1) pitch augmented stability; (2) angle of attack limiting; (3) lateral/directional augmented stability; (4) gust load alleviation; (5) maneuver load control; and (6) flutter mode control. The redundant digital control systems meet all function requirements with required reliability and declining weight and cost as advanced technology is introduced.

  12. The "high solubility" definition of the current FDA Guidance on Biopharmaceutical Classification System may be too strict for acidic drugs.

    Science.gov (United States)

    Yazdanian, Mehran; Briggs, Katherine; Jankovsky, Corinne; Hawi, Amale

    2004-02-01

    The purpose of this study was to assess if the definition of high solubility as proposed in the FDA Guidance on Biopharmaceutical Classification System (BCS) is too strict for highly permeable acidic drugs. The solubility and permeability values of 20 (18 acidic and 2 non-acidic) nonsteroidal anti-inflammatory drugs (NSAID) were determined. The NSAIDs were grouped into three different sets having acetic acid, propionic acid, or other acidic moieties such as fenamate, oxicam, and salicylate. Two nonacidic NSAIDs (celecoxib and rofecoxib) were also included for comparison purposes. Equilibrium solubility values were determined at pH 1.2, 5.0, 7.4, and in biorelevant media simulating fed intestinal fluid at pH 5.0. For a select number of acids, we also measured solubility values in media simulating gastric and fasted intestinal fluids. Permeability classification was established relative to that of reference drugs in the Caco-2 cell permeability model. Permeability coefficients for all drugs were measured at concentrations corresponding to the lowest and highest marketed dose strengths dissolved in 250 ml volume, and their potential interaction with cellular efflux pumps was investigated. All NSAIDs with different acidic functional groups were classified as highly permeable based on their Caco-2 cell permeability. Only ketorolac appeared to have a potential for interaction with cellular efflux pumps. Solubility classification was based on comparison of equilibrium solubility at pH 1.2, 5.0. and 7.4 relative to marketed dose strengths in 250 ml. The pKa values for the acidic NSAIDs studied were between 3.5 and 5.1. and, as expected, their solubility increased dramatically at pH 7.4 compared to pH 1.2. Only three NSAIDs, ketorolac, ketoprofen. and acetyl salicylic acid, meet the current criteria for high solubility over the entire pH range. However, with the exception of ibuprofen, oxaprozin, and mefenamic acid, the remaining compounds can be classified as Class I drugs

  13. White matter lesions and brain atrophy in systemic lupus erythematosus patients: correlation to cognitive dysfunction in a cohort of systemic lupus erythematosus patients using different definition models for neuropsychiatric systemic lupus erythematosus.

    Science.gov (United States)

    Cannerfelt, B; Nystedt, J; Jönsen, A; Lätt, J; van Westen, D; Lilja, A; Bengtsson, A; Nilsson, P; Mårtensson, J; Sundgren, P C

    2018-06-01

    Aim The aim of this study was to evaluate the extent of white matter lesions, atrophy of the hippocampus and corpus callosum, and their correlation with cognitive dysfunction (CD), in patients diagnosed with systemic lupus erythematosus (SLE). Methods Seventy SLE patients and 25 healthy individuals (HIs) were included in the study. To evaluate the different SLE and neuropsychiatric SLE (NPSLE) definition schemes, patients were grouped both according to the American College of Rheumatology (ACR) definition, as well as the more stringent ACR-Systemic Lupus International Collaborating Clinics definition. Patients and HIs underwent a 3 Tesla brain MRI and a standardized neuropsychological test. MRI data were evaluated for number and volume of white matter lesions and atrophy of the hippocampus and corpus callosum. Differences between groups and subgroups were evaluated for significance. Number and volume of white matter lesions and atrophy of the hippocampus and corpus callosum were correlated to cognitive dysfunction. Results The total volume of white matter lesions was significantly larger in SLE patients compared to HIs ( p = 0.004). However, no significant differences were seen between the different SLE subgroups. Atrophy of the bilateral hippocampus was significantly more pronounced in patients with NPSLE compared to those with non-NPSLE (right: p = 0.010; left p = 0.023). Significant negative correlations between cognitive test scores on verbal memory and number and volume of white matter lesions were present. Conclusion SLE patients have a significantly larger volume of white matter lesions on MRI compared to HIs and the degree of white matter lesion volume correlates to cognitive dysfunction, specifically to verbal memory. No significant differences in the number or volume of white matter lesions were identified between subgroups of SLE patients regardless of the definition model used.

  14. Accident precursors, near misses, and warning signs: Critical review and formal definitions within the framework of Discrete Event Systems

    International Nuclear Information System (INIS)

    Saleh, Joseph H.; Saltmarsh, Elizabeth A.; Favarò, Francesca M.; Brevault, Loïc

    2013-01-01

    An important consideration in safety analysis and accident prevention is the identification of and response to accident precursors. These off-nominal events are opportunities to recognize potential accident pathogens, identify overlooked accident sequences, and make technical and organizational decisions to address them before further escalation can occur. When handled properly, the identification of precursors provides an opportunity to interrupt an accident sequence from unfolding; when ignored or missed, precursors may only provide tragic proof after the fact that an accident was preventable. In this work, we first provide a critical review of the concept of precursor, and we highlight important features that ought to be distinguished whenever accident precursors are discussed. We address for example the notion of ex-ante and ex-post precursors, identified for postulated and instantiated (occurred) accident sequences respectively, and we discuss the feature of transferability of precursors. We then develop a formal (mathematical) definition of accident precursors as truncated accident sequences within the modeling framework of Discrete Event Systems. Additionally, we examine the related notions of “accident pathogens” as static or lurking adverse conditions that can contribute to or aggravate an accident, as well as “near misses”, “warning signs” and the novel concept of “accident pathway”. While these terms are within the same linguistic neighborhood as “accident precursors”, we argue that there are subtle but important differences between them and recommend that they not be used interchangeably for the sake of accuracy and clarity of communication within the risk and safety community. We also propose venues for developing quantitative importance measures for accident precursors, similar to component importance measures in reliability engineering. Our objective is to establish a common understanding and clear delineation of these terms, and

  15. 10 CFR 830.3 - Definitions.

    Science.gov (United States)

    2010-01-01

    ... structures, systems, and components; (3) Safety management programs; (4) Technical safety requirements; and..., construction, fabrication, assembly, decontamination, environmental restoration, waste management, laboratory... ENERGY NUCLEAR SAFETY MANAGEMENT § 830.3 Definitions. (a) The following definitions apply to this part...

  16. VSCE technology definition study

    Science.gov (United States)

    Howlett, R. A.; Hunt, R. B.

    1979-01-01

    Refined design definition of the variable stream control engine (VSCE) concept for advanced supersonic transports is presented. Operating and performance features of the VSCE are discussed, including the engine components, thrust specific fuel consumption, weight, noise, and emission system. A preliminary engine design is presented.

  17. What do we mean when we talk about the Triple Aim? A systematic review of evolving definitions and adaptations of the framework at the health system level.

    Science.gov (United States)

    Mery, Gustavo; Majumder, Shilpi; Brown, Adalsteinn; Dobrow, Mark J

    2017-06-01

    Notwithstanding important contributions of the Triple Aim, uncritical enthusiasm regarding the implications of the framework may be leading to inconsistent use, particularly when applied at the health system level, which goes beyond the original positioning of the framework as a strategic organizing principle to guide improvement initiatives at the organizational or local community level. We systematically identified uses of the Triple Aim that extended beyond its original intention to focus on uses at the whole health system level, to assess convergence and divergence with the original definition. We also attempted to identify consistencies in the way the Triple Aim was adapted for different contexts and settings. Data sources were indexed databases, web search engines, and international experts. Forty-seven articles were included in the analysis. We found that the definition of the Triple Aim has been subject to important modifications when the framework is used to define goals for whole health care systems or globally. Despite widespread recognition of the name, what constitutes the Triple Aim framework varies. We identified the need to consider the inclusion of at least two additional aims of health care systems - the provider experience of care, and the desire to achieve health equity for populations. Copyright © 2017. Published by Elsevier B.V.

  18. 48 CFR 370.203 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Definitions. 370.203... Opportunities 370.203 Definitions. For purposes of this Subpart 370.2, the following definitions shall apply: (a... Financing Act of 1974 (88 Stat. 77, 25 U.S.C. 1451). (d) Indian-owned economic enterprise means any Indian...

  19. 36 CFR 219.36 - Definitions.

    Science.gov (United States)

    2010-07-01

    ... Forest System Land and Resource Management Planning Definitions § 219.36 Definitions. Definitions of the... vision for a specific area of land or type of land within the plan area. Statements of desired conditions... species of plants or animals which are not indigenous to an area but valued for their contribution to...

  20. 48 CFR 3410.702 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... System 3410.702 Definitions. Department means the United States Department of Education. Metric system (a... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Definitions. 3410.702 Section 3410.702 Federal Acquisition Regulations System DEPARTMENT OF EDUCATION ACQUISITION REGULATION...

  1. Definition by modelling, optimization and characterization of a neutron spectrometry system based on Bonner spheres extended to the high-energy range

    International Nuclear Information System (INIS)

    Serre, S.

    2010-01-01

    This research thesis first describes the problematic of the effects of natural radiation on micro- and nano-electronic components, and the atmospheric-radiative stress of atmospheric neutrons from cosmic origin: issue of 'Single event upsets', present knowledge of the atmospheric radiative environment induced by cosmic rays. The author then presents the neutron-based detection and spectrometry by using the Bonner sphere technique: principle of moderating spheres, definition and mathematical formulation of neutron spectrometry using Bonner spheres, active sensors of thermal neutrons, response of a system to conventional Bonner spheres, extension to the range of high energies. Then, he reports the development of a Bonner sphere system extended to the high-energy range for the spectrometry of atmospheric neutrons: definition of a conventional system, Monte Carlo calculation of response functions, development of the response matrix, representation and semi-empirical verification of fluence response, uncertainty analysis, extension to high energies, and measurement tests of the spectrometer. He reports the use of a Monte Carlo simulation to characterize the spectrometer response in the high-energy range

  2. On the definition of 'chaos'

    International Nuclear Information System (INIS)

    Kolesov, Andrei Yu; Rozov, Nikolai Kh

    2009-01-01

    A new definition of a chaotic invariant set is given for a continuous semiflow in a metric space. It generalizes the well-known definition due to Devaney and allows one to take into account a special feature occurring in the non-compact infinite-dimensional case: so-called turbulent chaos. The paper consists of two sections. The first contains several well-known facts from chaotic dynamics, together with new definitions and results. The second presents a concrete example demonstrating that our definition of chaos is meaningful. Namely, an infinite-dimensional system of ordinary differential equations is investigated having an attractor that is chaotic in the sense of the new definition but not in the sense of Devaney or Knudsen. Bibliography: 65 titles.

  3. Practical Applicability and Preliminary Results of the Baltic Environmental Satellite Remote Sensing System (Satbałtyk

    Directory of Open Access Journals (Sweden)

    Ostrowska Mirosława

    2015-09-01

    Full Text Available The SatBałtyk (Satellite Monitoring of the Baltic Sea Environment project is being realized in Poland by the SatBałtyk Scientific Consortium, specifically appointed for this purpose, which associates four scientific institutions: the Institute of Oceanology PAN in Sopot - coordinator of the project, the University of Gdańsk (Institute of Oceanography, the Pomeranian Academy in Słupsk (Institute of Physics and the University of Szczecin (Institute of Marine Sciences. The project is aiming to prepare a technical infrastructure and set in motion operational procedures for the satellite monitoring of the Baltic Sea ecosystem. The main sources of input data for this system will be the results of systematic observations by metrological and environmental satellites such as TIROS N/NOAA, MSG (currently Meteosat 10, EOS/AQUA and Sentinel -1, 2, 3 (in the future. The system will deliver on a routine basis the variety of structural and functional properties of this sea, based on data provided by relevant satellites and supported by hydro-biological models. Among them: the solar radiation influx to the sea’s waters in various spectral intervals, energy balances of the short- and long-wave radiation at the Baltic Sea surface and in the upper layers of the atmosphere over the Baltic, sea surface temperature distribution, dynamic states of the water surface, concentrations of chlorophyll a and other phytoplankton pigments in the Baltic waters, spatial distributions of algal blooms, the occurrence of coastal upwelling events, and the characteristics of primary production of organic matter and photosynthetically released oxygen in the water and many others. The structure of the system and preliminary results will be presented.

  4. The U.S./Canadian GEO Bilateral Drought Indices and Definitions Study: Implications for the Canadian Drought Monitor and a Global Drought Early Warning System

    Science.gov (United States)

    Hadwen, T.; Heim, R. R.; Howard, A.

    2011-12-01

    provide recommendations for a global drought early warning system, and implications of the Drought Indices and Definitions Study for improving both the Can-DM and a global drought early warning system.

  5. The practicality of including the systemic inflammatory response syndrome in the definition of polytrauma: experience of a level one trauma centre.

    Science.gov (United States)

    Butcher, Nerida E; Balogh, Zsolt J

    2013-01-01

    The systemic inflammatory response syndrome (SIRS) has been advocated as a significant predictor of outcome in trauma. Recent trauma literature has proposed SIRS as a surrogate for physiological derangements characteristic of polytrauma with some authors recommending its inclusion into the definition of polytrauma. The practicality of daily SIRS collection outside of specifically designed prospective trials is unknown. The purpose of this study was to assess the availability of SIRS variables and its appropriateness for inclusion into a definition of polytrauma. We hypothesised SIRS variables would be readily available and easy to collect, thus represent an appropriate inclusion into the definition of polytrauma. A prospective observational study of all trauma team activation patients over 7-months (August 2009 to February 2010) at a University affiliated level-1 urban trauma centre. SIRS data (temperature>38°C or 90 bpm; RR>20/min or a PaCO(2)12.0×10(9)L(-1), or 10 immature bands) collected from presentation, at 24 h intervals until 72 h post injury. Inclusion criteria were all patients generating a trauma team activation response age >16. 336 patients met inclusion criteria. In 46% (155/336) serial SIRS scores could not be calculated due to missing data. Lowest rates of missing data observed on admission [3% (11/336)]. Stratified by ISS>15 (132/336), in 7% (9/132) serial SIRS scores could not be calculated due to missing data. In 123 patients ISS>15 with complete data, 81% (100/123) developed SIRS. For Abbreviated Injury Scale (AIS)>2 in at least 2 body regions (64/336) in 5% (3/64) serial SIRS scores could not be calculated, with 92% (56/61) of patients with complete data developing SIRS. For Direct ICU admissions [25% (85/336)] 5% (4/85) of patients could not have serial SIRS calculated [mean ISS 15(±11)] and 90% (73/81) developed SIRS at least once over 72 h. Based on the experience of our level-1 trauma centre, the practicability of including SIRS into the

  6. Dynamic Isotope Power System (DIPS) Applications Study. Volume II. Nuclear Integrated Multimission Spacecraft (NIMS) design definition. Final report

    International Nuclear Information System (INIS)

    1979-11-01

    The design requirements for the Nuclear Integrated Multimission Spacecraft. (NIMS) are discussed in detail. The requirements are a function of mission specifications, payload, control system requirements, electric system specifications, and cost limitations

  7. To the question of definition of fissile material mass and neutron multiplication in deep sub-critical systems

    International Nuclear Information System (INIS)

    Dulin, V.V.

    2006-01-01

    A method of determination neutrons multiplication in deep sub-critical multiplying media has been developed. It is based on a modified of Rossi - alpha method. It will consist in use of integral on time (a method of the areas) from correlated parts of distribution and integral in area, independent of time a part of distribution (area of a constant background). It allows to spend the calculated analysis, using the integrated equation on time for a neutrons flux and to not use representation of point kinetic model. A calculation spatially-correlation factor the adjoint (relative the detector count rate) inhomogeneous equation is used. Its calculation takes into account fission both in multiplying media and in a spontaneous neutron source. Measurements with plutonium-steel and uranium-steel blocks, and blocks from uranium and plutonium dioxide of different enrichment are have been carried out. The measured values of neutrons multiplication in a range 1.03-1.82 will be well coordinated to results of calculations. The question on an opportunity of definition of weight of the measured blocks of fissile material is considered [ru

  8. Empirical evaluation of decision support systems: Needs, definitions, potential methods, and an example pertaining to waterfowl management

    Science.gov (United States)

    Sojda, R.S.

    2007-01-01

    Decision support systems are often not empirically evaluated, especially the underlying modelling components. This can be attributed to such systems necessarily being designed to handle complex and poorly structured problems and decision making. Nonetheless, evaluation is critical and should be focused on empirical testing whenever possible. Verification and validation, in combination, comprise such evaluation. Verification is ensuring that the system is internally complete, coherent, and logical from a modelling and programming perspective. Validation is examining whether the system is realistic and useful to the user or decision maker, and should answer the question: “Was the system successful at addressing its intended purpose?” A rich literature exists on verification and validation of expert systems and other artificial intelligence methods; however, no single evaluation methodology has emerged as preeminent. At least five approaches to validation are feasible. First, under some conditions, decision support system performance can be tested against a preselected gold standard. Second, real-time and historic data sets can be used for comparison with simulated output. Third, panels of experts can be judiciously used, but often are not an option in some ecological domains. Fourth, sensitivity analysis of system outputs in relation to inputs can be informative. Fifth, when validation of a complete system is impossible, examining major components can be substituted, recognizing the potential pitfalls. I provide an example of evaluation of a decision support system for trumpeter swan (Cygnus buccinator) management that I developed using interacting intelligent agents, expert systems, and a queuing system. Predicted swan distributions over a 13-year period were assessed against observed numbers. Population survey numbers and banding (ringing) studies may provide long term data useful in empirical evaluation of decision support.

  9. Definition and means of maintaining the supply ventilation system seismic shutdown portion of the PFP safety envelope. Revision 2

    International Nuclear Information System (INIS)

    Keck, R.D.

    1995-01-01

    This report describes the modifications to the ventilation system for the Plutonium Finishing Plant. Topics discussed in this report include; system functional requirements, evaluations of equipment, a list of drawings showing the safety envelope boundaries; list of safety envelope equipment, functional requirements for individual safety envelope equipment, and a list of the operational, maintenance and surveillance procedures necessary to operate and maintain the system equipment

  10. Major morbidity after video-assisted thoracic surgery lung resections: a comparison between the European Society of Thoracic Surgeons definition and the Thoracic Morbidity and Mortality system.

    Science.gov (United States)

    Sandri, Alberto; Papagiannopoulos, Kostas; Milton, Richard; Kefaloyannis, Emmanuel; Chaudhuri, Nilanjan; Poyser, Emily; Spencer, Nicholas; Brunelli, Alessandro

    2015-07-01

    The thoracic morbidity and mortality (TM&M) classification system univocally encodes the postoperative adverse events by their management complexity. This study aims to compare the distribution of the severity of complications according to the TM&M system versus the distribution according to the classification proposed by European Society of Thoracic Surgeons (ESTS) Database in a population of patients submitted to video assisted thoracoscopic surgery (VATS) lung resection. A total of 227 consecutive patients submitted to VATS lobectomy for lung cancer were analyzed. Any complication developed postoperatively was graded from I to V according to the TM&M system, reflecting the increasing severity of its management. We verified the distribution of the different grades of complications and analyzed their frequency among those defined as "major cardiopulmonary complications" by the ESTS Database. Following the ESTS definitions, 20 were the major cardiopulmonary complications [atrial fibrillation (AF): 10, 50%; adult respiratory distress syndrome (ARDS): 1, 5%; pulmonary embolism: 2, 10%; mechanical ventilation >24 h: 1, 5%; pneumonia: 3, 15%; myocardial infarct: 1, 5%; atelectasis requiring bronchoscopy: 2, 10%] of which 9 (45%) were reclassified as minor complications (grade II) by the TM&M classification system. According to the TM&M system, 10/34 (29.4%) of all complications were considered minor (grade I or II) while 21/34 (71.4%) as major (IIIa: 8, 23.5%; IIIb: 4, 11.7%; IVa: 8, 23.5%; IVb: 1, 2.9%; V: 3, 8.8%). Other 14 surgical complications occurred and were classified as major complications according to the TM&M system. The distribution of postoperative complications differs between the two classification systems. The TM&M grading system questions the traditional classification of major complications following VATS lung resection and may be used as an additional endpoint for outcome analyses.

  11. SADE: system of acquisition of experimental data. Definition and analysis of an experiment description language; SADE: systeme d'acquisition de donnees experimentales. Definition et analyse d'un langage descripteur d'experience

    Energy Technology Data Exchange (ETDEWEB)

    Gagniere, Jean-Michel

    1983-06-10

    This research thesis presents a computer system for the acquisition of experimental data. It is aimed at acquiring, at processing and at storing information from particle detectors. The acquisition configuration is described by an experiment description language. The system comprises a lexical analyser, a syntactic analyser, a translator, and a data processing module. It also comprises a control language and a statistics management and plotting module. The translator builds up series of tables which allow, during an experiment, different sequences to be executed: experiment running, calculations to be performed on this data, building up of statistics. Short execution time and ease of use are always looked for [French] Cette these presente un systeme informatique d'acquisition de donnees experimentales, dit S.A.D.E. Ce systeme est destine a acquerir, a traiter et a stocker les informations en provenance de detecteurs de particules. La configuration d'acquisition est decrite par un langage descripteur d'experiences. Le systeme comporte un analyseur lexical, un analyseur syntaxique, un traducteur et un module de traitement des donnees. Le systeme comporte egalement un langage de commande et un module de gestion et trace de statistiques. Le traducteur construit des series de tables, qui permettent, lors du deroulement d'une experience, l'execution des differentes sequences: lecture des donnees, calculs a effectuer sur ces donnees, construction des statistiques. Tout au long de la realisation, deux objectifs fondamentaux sont consideres: recherche de la rapidite d'execution et facilite d'utilisation. (auteur)

  12. Integrated Application of Active Controls (IAAC) technology to an advanced subsonic transpot project-demonstration act system definition

    Science.gov (United States)

    Hanks, G. W.; Shomber, H. A.; Crumb, C. B.; Flora, C. C.; Macdonald, K. A. B.; Smith, R. D.; Sassi, A. P.; Dorwart, R. J.

    1982-01-01

    The 1985 ACT airplane is the Final Active Controls Technology (ACT) Airplane with the addition of three-axis fly by wire. Thus it retains all the efficiency features of the full ACT system plus the weight and cost savings accruing from deletion of the mechanical control system. The control system implements the full IAAC spectrum of active controls except flutter-mode control, judged essentially nonbeneficial, and incorporates new control surfaces called flaperons to make the most of wing-load alleviation. This redundant electronic system is conservatively designed to preserve the extreme reliability required of crucial short-period pitch augmentation, which provides more than half of the fuel savings.

  13. 48 CFR 432.001 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Definitions. 432.001 Section 432.001 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE GENERAL CONTRACTING REQUIREMENTS CONTRACT FINANCING 432.001 Definitions. The agency contract finance office is the office, other...

  14. 48 CFR 2.101 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Definitions. 2.101 Section 2.101 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL DEFINITIONS OF..., recommendations, training and the day-to-day aid of support personnel needed for the successful performance of...

  15. 48 CFR 1819.7101 - Definition.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Definition. 1819.7101 Section 1819.7101 Federal Acquisition Regulations System NATIONAL AERONAUTICS AND SPACE ADMINISTRATION SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS NASA Rural Area Small Business Plan 1819.7101 Definition. Rural...

  16. 48 CFR 204.7101 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... OF DEFENSE GENERAL ADMINISTRATIVE MATTERS Uniform Contract Line Item Numbering System 204.7101 Definitions. Accounting classification reference number (ACRN) means any combination of a two position alpha... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Definitions. 204.7101...

  17. 48 CFR 30.001 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Definitions. 30.001 Section 30.001 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS COST ACCOUNTING STANDARDS ADMINISTRATION 30.001 Definitions. As used in this part— Affected CAS...

  18. 48 CFR 430.070 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Definitions. 430.070 Section 430.070 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE GENERAL CONTRACTING REQUIREMENTS COST ACCOUNTING STANDARDS ADMINISTRATION 430.070 Definitions. ACO, as used in this part and in FAR...

  19. 48 CFR 8.801 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Definitions. 8.801 Section 8.801 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION ACQUISITION PLANNING REQUIRED SOURCES OF SUPPLIES AND SERVICES Acquisition of Printing and Related Supplies 8.801 Definitions...

  20. 48 CFR 32.801 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Definitions. 32.801 Section 32.801 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS CONTRACT FINANCING Assignment of Claims 32.801 Definitions. Designated agency, as used in this...

  1. Definition and means of maintaining the process vacuum liquid detection interlock systems portion of the PFP safety envelope

    International Nuclear Information System (INIS)

    LINTHO, J.E.

    2003-01-01

    The purpose of this document is to record the technical evaluation of the Technical Safety Requirements described in the Plutonium Finishing Plant (PFP) Safety Technical Requirements, HNF-SD-CP-OSR-010/Rev.1, Section 3.1.1, ''Criticality Prevention System.'' This document also defines the Safety Envelope (SE) for the liquid detection interlock system in the Process Vacuum System. The SE is derived FR-om information in the Plutonium Finishing Plant Final Safety Analysis Report (PFP FSAR), HNF-SD-CP-SAR-021, Rev 4, and the Criticality Safety Analysis Report (CSAR) for the 26-inch Hg Vacuum System, WHC-SD-SQA-CSA-20159, Rev 0-A. This document, with its appendices, provides the following: (1) The system functional requirements for determining system operability (Section 3). (2) Evaluations of equipment to determine the safety envelope boundary for the system (Section 4 list of SE boundary drawings). (3) A list of the safety envelope equipment (Appendix B). (4) Functional requirements for the individual safety envelope equipment, including appropriate set points and process parameters (Section 4). (5) A list of the operational and surveillance procedures necessary to operate and maintain the system equipment within the safety envelope (Sections 5 and 6 and Appendix A)

  2. Definition and means of maintaining the emergency notification and evacuation system portion of the plutonium finishing plant safety envelope

    International Nuclear Information System (INIS)

    WHITE, W.F.

    1999-01-01

    The Emergency Evacuation and Notification System provides information to the Plutonium Finishing Plant (PFP) Building Emergency Director to assist in determining appropriate emergency response, notifies personnel of the required response, and assists in their response. The report identifies the equipment in the Safety Envelope (SE) for this System and the Administrative, Maintenance, and Surveillance Procedures used to maintain the SE Equipment

  3. Definition and means of maintaining the emergency notification and evacuation system portion of the plutonium finishing plant safety envelope; TOPICAL

    International Nuclear Information System (INIS)

    WHITE, W.F.

    1999-01-01

    The Emergency Evacuation and Notification System provides information to the Plutonium Finishing Plant (PFP) Building Emergency Director to assist in determining appropriate emergency response, notifies personnel of the required response, and assists in their response. The report identifies the equipment in the Safety Envelope (SE) for this System and the Administrative, Maintenance, and Surveillance Procedures used to maintain the SE Equipment

  4. Definition and means of maintaining the emergency notification and evacuation system portion of the Plutonium Finishing Plant safety envelope

    International Nuclear Information System (INIS)

    White, W.F.

    1997-01-01

    The Emergency Evacuation and Notification System provides information to the PFP Building Emergency Director to assist in determining appropriate emergency response, notifies personnel of the required response, and assists in their response. The report identifies the equipment in the Safety Envelope (SE) for this System and the Administrative, Maintenance, and Surveillance Procedures used to maintain the SE Equipment

  5. Smart device definition and application on embedded system: performance and optimi-zation on a RGBD sensor

    Directory of Open Access Journals (Sweden)

    Jose-Luis JIMÉNEZ-GARCÍA

    2014-10-01

    Full Text Available Embedded control systems usually are characterized by its limitations in terms of computational power and memory. Although this systems must deal with perpection and actuation signal adaptation and calculate control actions ensuring its reliability and providing a certain degree of fault tolerance. The allocation of these tasks between some different embedded nodes conforming a distributed control system allows to solve many of these issues. For that reason is proposed the application of smart devices aims to perform the data processing tasks related with the perception and actuation and offer a simple interface to be configured by other nodes in order to share processed information and raise QoS based alarms. In this work is introduced the procedure of implementing a smart device as a sensor as an embedded node in a distributed control system. In order to analyze its benefits an application based on a RGBD sensor implemented as an smart device is proposed.

  6. Strategic avionics technology definition studies. Subtask 3-1A3: Electrical Actuation (ELA) Systems Test Facility

    Science.gov (United States)

    Rogers, J. P.; Cureton, K. L.; Olsen, J. R.

    1994-01-01

    Future aerospace vehicles will require use of the Electrical Actuator systems for flight control elements. This report presents a proposed ELA Test Facility for dynamic evaluation of high power linear Electrical Actuators with primary emphasis on Thrust Vector Control actuators. Details of the mechanical design, power and control systems, and data acquisition capability of the test facility are presented. A test procedure for evaluating the performance of the ELA Test Facility is also included.

  7. Hadoop The Definitive Guide

    CERN Document Server

    White, Tom

    2009-01-01

    Hadoop: The Definitive Guide helps you harness the power of your data. Ideal for processing large datasets, the Apache Hadoop framework is an open source implementation of the MapReduce algorithm on which Google built its empire. This comprehensive resource demonstrates how to use Hadoop to build reliable, scalable, distributed systems: programmers will find details for analyzing large datasets, and administrators will learn how to set up and run Hadoop clusters. Complete with case studies that illustrate how Hadoop solves specific problems, this book helps you: Use the Hadoop Distributed

  8. Apache The Definitive Guide

    CERN Document Server

    Laurie, Ben

    2003-01-01

    Apache is far and away the most widely used web server platform in the world. This versatile server runs more than half of the world's existing web sites. Apache is both free and rock-solid, running more than 21 million web sites ranging from huge e-commerce operations to corporate intranets and smaller hobby sites. With this new third edition of Apache: The Definitive Guide, web administrators new to Apache will come up to speed quickly, and experienced administrators will find the logically organized, concise reference sections indispensable, and system programmers interested in customizin

  9. Cassandra the definitive guide

    CERN Document Server

    Hewitt, Eben

    2011-01-01

    What could you do with data if scalability wasn't a problem? With this hands-on guide, you'll learn how Apache Cassandra handles hundreds of terabytes of data while remaining highly available across multiple data centers -- capabilities that have attracted Facebook, Twitter, and other data-intensive companies. Cassandra: The Definitive Guide provides the technical details and practical examples you need to assess this database management system and put it to work in a production environment. Author Eben Hewitt demonstrates the advantages of Cassandra's nonrelational design, and pays special

  10. Formal Definitions of Unbounded Evolution and Innovation Reveal Universal Mechanisms for Open-Ended Evolution in Dynamical Systems.

    Science.gov (United States)

    Adams, Alyssa; Zenil, Hector; Davies, Paul C W; Walker, Sara Imari

    2017-04-20

    Open-ended evolution (OEE) is relevant to a variety of biological, artificial and technological systems, but has been challenging to reproduce in silico. Most theoretical efforts focus on key aspects of open-ended evolution as it appears in biology. We recast the problem as a more general one in dynamical systems theory, providing simple criteria for open-ended evolution based on two hallmark features: unbounded evolution and innovation. We define unbounded evolution as patterns that are non-repeating within the expected Poincare recurrence time of an isolated system, and innovation as trajectories not observed in isolated systems. As a case study, we implement novel variants of cellular automata (CA) where the update rules are allowed to vary with time in three alternative ways. Each is capable of generating conditions for open-ended evolution, but vary in their ability to do so. We find that state-dependent dynamics, regarded as a hallmark of life, statistically out-performs other candidate mechanisms, and is the only mechanism to produce open-ended evolution in a scalable manner, essential to the notion of ongoing evolution. This analysis suggests a new framework for unifying mechanisms for generating OEE with features distinctive to life and its artifacts, with broad applicability to biological and artificial systems.

  11. LDR structural experiment definition

    Science.gov (United States)

    Russell, R. A.

    1988-01-01

    A system study to develop the definition of a structural flight experiment for a large precision segmented reflector on the Space Station was accomplished by the Boeing Aerospace Company for NASA's Langley Research Center. The objective of the study was to use a Large Deployable Reflector (LDR) baseline configuration as the basis for focusing an experiment definition, so that the resulting accommodation requirements and interface constraints could be used as part of the mission requirements data base for Space Station. The primary objectives of the first experiment are to construct the primary mirror support truss and to determine its structural and thermal characteristics. Addition of an optical bench, thermal shield and primary mirror segments, and alignment of the optical components, would occur on a second experiment. The structure would then be moved to the payload point system for pointing, optical control, and scientific optical measurement for a third experiment. Experiment 1 will deploy the primary support truss while it is attached to the instrument module structure. The ability to adjust the mirror attachment points and to attach several dummy primary mirror segments with a robotic system will also be demonstrated. Experiment 2 will be achieved by adding new components and equipment to experiment one. Experiment 3 will demonstrate advanced control strategies, active adjustment of the primary mirror alignment, and technologies associated with optical sensing.

  12. Earth Observatory Satellite system definition study. Report 1: Orbit/launch vehicle trade-off studies and recommendations

    Science.gov (United States)

    1974-01-01

    A summary of the constraints and requirements on the Earth Observatory Satellite (EOS-A) orbit and launch vehicle analysis is presented. The propulsion system (hydrazine) and the launch vehicle (Delta 2910) selected for EOS-A are examined. The rationale for the selection of the recommended orbital altitude of 418 nautical miles is explained. The original analysis was based on the EOS-A mission with the Thematic Mapper and the High Resolution Pointable Imager. The impact of the revised mission model is analyzed to show how the new mission model affects the previously defined propulsion system, launch vehicle, and orbit. A table is provided to show all aspects of the EOS multiple mission concepts. The subjects considered include the following: (1) mission orbit analysis, (2) spacecraft parametric performance analysis, (3) launch system performance analysis, and (4) orbits/launch vehicle selection.

  13. Solar Heating And Cooling Of Buildings (SHACOB): Requirements definition and impact analysis-2. Volume 3: Customer load management systems

    Science.gov (United States)

    Cretcher, C. K.; Rountredd, R. C.

    1980-11-01

    Customer Load Management Systems, using off-peak storage and control at the residences, are analyzed to determine their potential for capacity and energy savings by the electric utility. Areas broadly representative of utilities in the regions around Washington, DC and Albuquerque, NM were of interest. Near optimum tank volumes were determined for both service areas, and charging duration/off-time were identified as having the greatest influence on tank performance. The impacts on utility operations and corresponding utility/customer economics were determined in terms of delta demands used to estimate the utilities' generating capacity differences between the conventional load management, (CLM) direct solar with load management (DSLM), and electric resistive systems. Energy differences are also determined. These capacity and energy deltas are translated into changes in utility costs due to penetration of the CLM or DSLM systems into electric resistive markets in the snapshot years of 1990 and 2000.

  14. High definition for systems biology of microbial communities: metagenomics gets genome-centric and strain-resolved.

    Science.gov (United States)

    Turaev, Dmitrij; Rattei, Thomas

    2016-06-01

    The systems biology of microbial communities, organismal communities inhabiting all ecological niches on earth, has in recent years been strongly facilitated by the rapid development of experimental, sequencing and data analysis methods. Novel experimental approaches and binning methods in metagenomics render the semi-automatic reconstructions of near-complete genomes of uncultivable bacteria possible, while advances in high-resolution amplicon analysis allow for efficient and less biased taxonomic community characterization. This will also facilitate predictive modeling approaches, hitherto limited by the low resolution of metagenomic data. In this review, we pinpoint the most promising current developments in metagenomics. They facilitate microbial systems biology towards a systemic understanding of mechanisms in microbial communities with scopes of application in many areas of our daily life. Copyright © 2016 Elsevier Ltd. All rights reserved.

  15. Definition and means of maintaining the process vacuum liquid detection interlock systems portion of the PFP safety envelope

    International Nuclear Information System (INIS)

    THOMAS, R.J.

    1999-01-01

    The Process Vacuum Liquid Detection interlock systems prevent intrusion of process liquids into the HEPA filters downstream of demisters No.6 and No.7 during Process Vacuum System operation. This prevents liquid intrusion into the filters, which could cause a criticality. The Safety Envelope (SE) includes the equipment, which detects the presence of liquids in the vacuum headers; isolates the filters; shuts down the vacuum pumps; and alarms the condition. This report identifies the equipment in the SE operating, maintenance, and surveillance procedures needed to maintain the SE equipment; and rationale for exclusion of some equipment and testing from the SE

  16. Space station data system analysis/architecture study. Task 1: Functional requirements definition, DR-5. Appendix: Requirements data base

    Science.gov (United States)

    1985-01-01

    Appendix A contains data that characterize the system functions in sufficient depth as to determine the requirements for the Space Station Data System (SSDS). This data is in the form of: (1) top down traceability report; (2) bottom up traceability report; (3) requirements data sheets; and (4) cross index of requirements paragraphs of the source documents and the requirements numbers. A data base users guide is included that interested parties can use to access the requirements data base and get up to date information about the functions.

  17. More accurate definition of liquation dome in Na2O-B2O3-SiO2 system

    International Nuclear Information System (INIS)

    Alekseeva, Z.D.; Mazurin, O.V.; Aver'yanov, V.I.; Galakhov, F.Ya.

    1977-01-01

    The liquation region in the system Na 2 O-B 2 O 3 -SiO 2 was investigated. The liquation temperatures were determined by the boundary of disappearance of opalescence in specimens with pre-induced opalescence. Extrapolation of the concentration dependences of the liquation temperature along sections with a constant SiO 2 content to a point indicates that with a SiO 2 content of 20-40% the liquation boundary in the system B 2 O 3 -SiO 2 hardly lies above 450 deg C

  18. Optimal operating rules definition in complex water resource systems combining fuzzy logic, expert criteria and stochastic programming

    Science.gov (United States)

    Macian-Sorribes, Hector; Pulido-Velazquez, Manuel

    2016-04-01

    This contribution presents a methodology for defining optimal seasonal operating rules in multireservoir systems coupling expert criteria and stochastic optimization. Both sources of information are combined using fuzzy logic. The structure of the operating rules is defined based on expert criteria, via a joint expert-technician framework consisting in a series of meetings, workshops and surveys carried out between reservoir managers and modelers. As a result, the decision-making process used by managers can be assessed and expressed using fuzzy logic: fuzzy rule-based systems are employed to represent the operating rules and fuzzy regression procedures are used for forecasting future inflows. Once done that, a stochastic optimization algorithm can be used to define optimal decisions and transform them into fuzzy rules. Finally, the optimal fuzzy rules and the inflow prediction scheme are combined into a Decision Support System for making seasonal forecasts and simulate the effect of different alternatives in response to the initial system state and the foreseen inflows. The approach presented has been applied to the Jucar River Basin (Spain). Reservoir managers explained how the system is operated, taking into account the reservoirs' states at the beginning of the irrigation season and the inflows previewed during that season. According to the information given by them, the Jucar River Basin operating policies were expressed via two fuzzy rule-based (FRB) systems that estimate the amount of water to be allocated to the users and how the reservoir storages should be balanced to guarantee those deliveries. A stochastic optimization model using Stochastic Dual Dynamic Programming (SDDP) was developed to define optimal decisions, which are transformed into optimal operating rules embedding them into the two FRBs previously created. As a benchmark, historical records are used to develop alternative operating rules. A fuzzy linear regression procedure was employed to

  19. Some important features of the proposed new definition of the International System of Units (SI: realization and hierarchical problems that the users should know about

    Directory of Open Access Journals (Sweden)

    Pavese Franco

    2016-01-01

    Full Text Available The paper, after a short introduction to measurement units in general and to the present international system of units (SI: Système International des Unités, deals with a digest of the basics of the proposed new SI:2018 and of its differences compared with the present SI. The latter issue also involves a review of some problems still unresolved in the last draft, concerning: the role of the constants of physics in the system and their role in the conceptual construction of this international standard; the method employed for using the relevant experimental data, and related statistical issues; finally, the implications for science of the New SI implementation. The consequences for and new duties of the national metrology institutes and practitioners are illustrated, involving the future conformity of the present standards and a possible hierarchy between countries that would result from the new definition, in contrast with certain principles of the Convention du Mètre.

  20. Methods for the definition of calibration intervals and to perform cost-efectiveness analysis in management systems

    OpenAIRE

    Ribeiro, A.; Lages Martins, L.; Sousa, J. A.; Baptista, R.

    2009-01-01

    Management systems developed according to ISO/IEC 17025 must fulfil several requirements, being particularly relevant the assurance of the measurement results quality. The enhancement of that quality depends upon several conditions, one of which is the instrumentation metrological performance and its service conditions along its lifetime. In this context, the evaluation of long time drifts in the instrumentation metrological performance is a major concern requiring the developm...

  1. Systems medicine approaches for the definition of complex phenotypes in chronic diseases and ageing. From concept to implementation and policies.

    Science.gov (United States)

    Bousquet, Jean; Jorgensen, Christian; Dauzat, Michel; Cesario, Alfredo; Camuzat, Thierry; Bourret, Rodolphe; Best, Nicolas; Anto, Josep M; Abecassis, Frederic; Aubas, Pierre; Avignon, Antoine; Badin, Melanie; Bedbrook, Anna; Blain, Hubert; Bourdin, Arnaud; Bringer, Jacques; Camu, William; Cayla, Guilhaume; Costa, David J; Courtet, Philippe; Cristol, Jean-Paul; Demoly, Pascal; de la Coussaye, Jean-Emmanuel; Fesler, Pierre; Gouzi, Fares; Gris, Jean-Christophe; Guillot, Bernard; Hayot, Maurice; Jeandel, Claude; Jonquet, Olivier; Journot, Laurent; Lehmann, Sylvain; Mathieu, Gwenaelle; Morel, Jacques; Ninot, Gregory; Pelissier, Jacques; Picot, Marie-Christine; Radier-Pontal, Francoise; Robine, Jean-Marie; Rodier, Michel; Roubille, Francois; Sultan, Ariane; Wojtusciszyn, Anne; Auffray, Charles; Balling, Rudi; Barbara, Cristina; Cambon-Thomsen, Anne; Chavannes, Niels H; Chuchalin, Alexander; Crooks, George; Dedeu, Antoni; Fabbri, Leonardo M; Garcia-Aymerich, Judith; Hajjam, Jawad; Melo Gomes, Elisabete; Palkonen, Susana; Piette, Francois; Pison, Christophe; Price, David; Samolinski, Boleslaw; Schunemann, Holger J; Sterk, Peter J; Yiallouros, Panayiotis; Roca, Josep; Van de Perre, Philippe; Mercier, Jacques

    2014-01-01

    Chronic diseases are diseases of long duration and slow progression. Major NCDs (cardiovascular diseases, cancer, chronic respiratory diseases, diabetes, rheumatologic diseases and mental health) represent the predominant health problem of the Century. The prevention and control of NCDs are the priority of the World Health Organization 2008 Action Plan, the United Nations 2010 Resolution and the European Union 2010 Council. The novel trend for the management of NCDs is evolving towards integrative, holistic approaches. NCDs are intertwined with ageing. The European Innovation Partnership on Active and Healthy Ageing (EIP on AHA) has prioritised NCDs. To tackle them in their totality in order to reduce their burden and societal impact, it is proposed that NCDs should be considered as a single expression of disease with different risk factors and entities. An innovative integrated health system built around systems medicine and strategic partnerships is proposed to combat NCDs. It includes (i) understanding the social, economic, environmental, genetic determinants, as well as the molecular and cellular mechanisms underlying NCDs; (ii) primary care and practice-based interprofessional collaboration; (iii) carefully phenotyped patients; (iv) development of unbiased and accurate biomarkers for comorbidities, severity and follow up of patients; (v) socio-economic science; (vi) development of guidelines; (vii) training; and (viii) policy decisions. The results could be applicable to all countries and adapted to local needs, economy and health systems. This paper reviews the complexity of NCDs intertwined with ageing. It gives an overview of the problem and proposes two practical examples of systems medicine (MeDALL) applied to allergy and to NCD co-morbidities (MACVIA-LR, Reference Site of the European Innovation Partnership on Active and Healthy Ageing).

  2. Definition, technology readiness, and development cost of the orbit transfer vehicle engine integrated control and health monitoring system elements

    Science.gov (United States)

    Cannon, I.; Balcer, S.; Cochran, M.; Klop, J.; Peterson, S.

    1991-01-01

    An Integrated Control and Health Monitoring (ICHM) system was conceived for use on a 20 Klb thrust baseline Orbit Transfer Vehicle (OTV) engine. Considered for space used, the ICHM was defined for reusability requirements for an OTV engine service free life of 20 missions, with 100 starts and a total engine operational time of 4 hours. Functions were derived by flowing down requirements from NASA guidelines, previous OTV engine or ICHM documents, and related contracts. The elements of an ICHM were identified and listed, and these elements were described in sufficient detail to allow estimation of their technology readiness levels. These elements were assessed in terms of technology readiness level, and supporting rationale for these assessments presented. The remaining cost for development of a minimal ICHM system to technology readiness level 6 was estimated. The estimates are within an accuracy range of minus/plus 20 percent. The cost estimates cover what is needed to prepare an ICHM system for use on a focussed testbed for an expander cycle engine, excluding support to the actual test firings.

  3. On inclusion of water resource management in Earth system models - Part 1: Problem definition and representation of water demand

    Science.gov (United States)

    Nazemi, A.; Wheater, H. S.

    2015-01-01

    Human activities have caused various changes to the Earth system, and hence the interconnections between human activities and the Earth system should be recognized and reflected in models that simulate Earth system processes. One key anthropogenic activity is water resource management, which determines the dynamics of human-water interactions in time and space and controls human livelihoods and economy, including energy and food production. There are immediate needs to include water resource management in Earth system models. First, the extent of human water requirements is increasing rapidly at the global scale and it is crucial to analyze the possible imbalance between water demands and supply under various scenarios of climate change and across various temporal and spatial scales. Second, recent observations show that human-water interactions, manifested through water resource management, can substantially alter the terrestrial water cycle, affect land-atmospheric feedbacks and may further interact with climate and contribute to sea-level change. Due to the importance of water resource management in determining the future of the global water and climate cycles, the World Climate Research Program's Global Energy and Water Exchanges project (WRCP-GEWEX) has recently identified gaps in describing human-water interactions as one of the grand challenges in Earth system modeling (GEWEX, 2012). Here, we divide water resource management into two interdependent elements, related firstly to water demand and secondly to water supply and allocation. In this paper, we survey the current literature on how various components of water demand have been included in large-scale models, in particular land surface and global hydrological models. Issues of water supply and allocation are addressed in a companion paper. The available algorithms to represent the dominant demands are classified based on the demand type, mode of simulation and underlying modeling assumptions. We discuss

  4. Earth Observatory Satellite system definition study. Report no. 3: Design/cost tradeoff studies. Appendix D: EOS configuration design data. Part 2: Data management system configuration

    Science.gov (United States)

    1974-01-01

    The Earth Observatory Satellite (EOS) data management system (DMS) is discussed. The DMS is composed of several subsystems or system elements which have basic purposes and are connected together so that the DMS can support the EOS program by providing the following: (1) payload data acquisition and recording, (2) data processing and product generation, (3) spacecraft and processing management and control, and (4) data user services. The configuration and purposes of the primary or high-data rate system and the secondary or local user system are explained. Diagrams of the systems are provided to support the systems analysis.

  5. Lift/cruise fan V/STOL technology aircraft design definition study. Volume 2: Propulsion transmission system design

    Science.gov (United States)

    Obrien, W. J.

    1976-01-01

    Two types of lift/cruise fan technology aircraft were conceptually designed. One aircraft used turbotip fans pneumatically interconnected to three gas generators, and the other aircraft used variable pitch fans mechanically interconnected to three turboshaft engines. The components of each propulsion transmission system were analyzed and designed to the depth necessary to determine areas of risk, development methods, performance, weights and costs. The types of materials and manufacturing processes were identified to show that the designs followed a low cost approach. The lift/cruise fan thrust vectoring hoods, which are applicable to either aircraft configuration, were also evaluated to assure a low cost/low risk approach.

  6. 45 CFR 95.605 - Definitions.

    Science.gov (United States)

    2010-10-01

    ..., system studies, system design efforts, development of system specifications, system analysis, programming... definition of system requirements, detailing of system and program specifications, programming and testing... 1903(r) of the Social Security Act and at 42 CFR 433.110 et seq. Total Acquisition Cost means all...

  7. Phase 1 of the First Small Power System Experiment (engineering Experiment No. 1). Volume 4: Commercial System Definition. [development and testing of a solar thermal power plant

    Science.gov (United States)

    Holl, R. J.

    1979-01-01

    The development and design of a modular solar thermal power system for application in the 1 to 10 MWe range is described. The system is used in remote utility applications, small communities, rural areas, and for industrial uses. The operational reliability, the minimum risk of failure, and the maintenance and repair characteristics are determined and the commercial system design is defined.

  8. Towards High-Definition 3D Urban Mapping: Road Feature-Based Registration of Mobile Mapping Systems and Aerial Imagery

    Directory of Open Access Journals (Sweden)

    Mahdi Javanmardi

    2017-09-01

    Full Text Available Various applications have utilized a mobile mapping system (MMS as the main 3D urban remote sensing platform. However, the accuracy and precision of the three-dimensional data acquired by an MMS is highly dependent on the performance of the vehicle’s self-localization, which is generally performed by high-end global navigation satellite system (GNSS/inertial measurement unit (IMU integration. However, GNSS/IMU positioning quality degrades significantly in dense urban areas with high-rise buildings, which block and reflect the satellite signals. Traditional landmark updating methods, which improve MMS accuracy by measuring ground control points (GCPs and manually identifying those points in the data, are both labor-intensive and time-consuming. In this paper, we propose a novel and comprehensive framework for automatically georeferencing MMS data by capitalizing on road features extracted from high-resolution aerial surveillance data. The proposed framework has three key steps: (1 extracting road features from the MMS and aerial data; (2 obtaining Gaussian mixture models from the extracted aerial road features; and (3 performing registration of the MMS data to the aerial map using a dynamic sliding window and the normal distribution transform (NDT. The accuracy of the proposed framework is verified using field data, demonstrating that it is a reliable solution for high-precision urban mapping.

  9. 48 CFR 223.370-2 - Definition.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Definition. 223.370-2..., DEPARTMENT OF DEFENSE SOCIOECONOMIC PROGRAMS ENVIRONMENT, ENERGY AND WATER EFFICIENCY, RENEWABLE ENERGY... Safety Data 223.370-2 Definition. Ammunition and explosives, as used in this section, is defined in the...

  10. 41 CFR 109-38.5201 - Definition.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Definition. 109-38.5201... System (Continued) DEPARTMENT OF ENERGY PROPERTY MANAGEMENT REGULATIONS AVIATION, TRANSPORTATION, AND MOTOR VEHICLES 38-MOTOR EQUIPMENT MANAGEMENT 38.52-Watercraft § 109-38.5201 Definition. As used in this...

  11. 48 CFR 208.7401 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... OF DEFENSE ACQUISITION PLANNING REQUIRED SOURCES OF SUPPLIES AND SERVICES Enterprise Software Agreements 208.7401 Definitions. As used in this subpart— Enterprise software agreement means an agreement or... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Definitions. 208.7401...

  12. 28 CFR 26.21 - Definitions.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Definitions. 26.21 Section 26.21 Judicial Administration DEPARTMENT OF JUSTICE DEATH SENTENCES PROCEDURES Certification Process for State Capital Counsel Systems § 26.21 Definitions. For purposes of this part, the term— Appropriate state official means the...

  13. 41 CFR 101-4.105 - Definitions.

    Science.gov (United States)

    2010-07-01

    ... PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Introduction § 101-4.105 Definitions. As used... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Definitions. 101-4.105 Section 101-4.105 Public Contracts and Property Management Federal Property Management Regulations System...

  14. DIST/AVC Out-Put Definition.

    Science.gov (United States)

    Wilkinson, Gene L.

    The first stage of development of a management information system for DIST/AVC (Division of Instructional Technology/Audio-Visual Center) is the definition of out-put units. Some constraints on the definition of output units are: 1) they should reflect goals of the organization, 2) they should reflect organizational structure and procedures, and…

  15. 48 CFR 33.201 - Definitions.

    Science.gov (United States)

    2010-10-01

    .... Alternative dispute resolution (ADR) means any type of procedure or combination of procedures voluntarily used... REQUIREMENTS PROTESTS, DISPUTES, AND APPEALS Disputes and Appeals 33.201 Definitions. As used in this subpart... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Definitions. 33.201...

  16. 12 CFR 997.1 - Definitions.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Definitions. 997.1 Section 997.1 Banks and Banking FEDERAL HOUSING FINANCE BOARD NON-BANK SYSTEM ENTITIES RESOLUTION FUNDING CORPORATION OBLIGATIONS OF THE BANKS § 997.1 Definitions. As used in this part: Actual quarterly payment means the quarterly...

  17. Calculation and definition of safety indicators

    International Nuclear Information System (INIS)

    Cristian, I.; Branzeu, N.; Vidican, D.; Vladescu, G.

    1997-01-01

    This paper presents, based on Cernavoda safety indicators proposal, the purpose definition and calculation formulas for each of the selected safety indicators. Five categories of safety indicators for Cernavoda Unit 1 were identified, namely: overall plant safety performance; initiating events; safety system availability, physical barrier integrity; indirect indicators. Definition, calculation and use of some safety indicators are shown in a tabular form. (authors)

  18. 46 CFR 58.16-5 - Definition.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Definition. 58.16-5 Section 58.16-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MAIN AND AUXILIARY MACHINERY AND RELATED SYSTEMS Liquefied Petroleum Gases for Cooking and Heating § 58.16-5 Definition. For the purpose of this...

  19. 48 CFR 50.201 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... EXTRAORDINARY CONTRACTUAL ACTIONS AND THE SAFETY ACT Support Anti-terrorism by Fostering Effective Technologies Act of 2002 50.201 Definitions. Act of terrorism means any act determined to have met the following... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Definitions. 50.201...

  20. 48 CFR 23.1003 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Definitions. 23.1003....1003 Definitions. As used in this subpart— Federal agency means an executive agency (see 2.101). Priority chemical means a chemical identified by the Interagency Environmental Leadership Workgroup or...

  1. 41 CFR 109-43.001 - Definition.

    Science.gov (United States)

    2010-07-01

    ... PERSONAL PROPERTY § 109-43.001 Definition. DOE screening period means the period of time that reportable... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Definition. 109-43.001 Section 109-43.001 Public Contracts and Property Management Federal Property Management Regulations System...

  2. 48 CFR 970.0371-3 - Definition.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Definition. 970.0371-3... Interest 970.0371-3 Definition. Employees, as used in this section, are defined to mean individuals employed by the contractor, both full and part-time, who are assigned to work under a DOE management and...

  3. 48 CFR 203.171-2 - Definition.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Definition. 203.171-2..., DEPARTMENT OF DEFENSE GENERAL IMPROPER BUSINESS PRACTICES AND PERSONAL CONFLICTS OF INTEREST Safeguards 203.171-2 Definition. Covered DoD official as used in this section, is defined in the clause at 252.203...

  4. 48 CFR 25.703-1 - Definition.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Definition. 25.703-1... PROGRAMS FOREIGN ACQUISITION Prohibited Sources 25.703-1 Definition. Person— (1) Means— (i) A natural person; (ii) A corporation, business association, partnership, society, trust, financial institution...

  5. 48 CFR 9904.410-30 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... Section 9904.410-30 Federal Acquisition Regulations System COST ACCOUNTING STANDARDS BOARD, OFFICE OF FEDERAL PROCUREMENT POLICY, OFFICE OF MANAGEMENT AND BUDGET PROCUREMENT PRACTICES AND COST ACCOUNTING STANDARDS COST ACCOUNTING STANDARDS 9904.410-30 Definitions. (a) The following are definitions of terms...

  6. 48 CFR 9904.408-30 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... Section 9904.408-30 Federal Acquisition Regulations System COST ACCOUNTING STANDARDS BOARD, OFFICE OF FEDERAL PROCUREMENT POLICY, OFFICE OF MANAGEMENT AND BUDGET PROCUREMENT PRACTICES AND COST ACCOUNTING STANDARDS COST ACCOUNTING STANDARDS 9904.408-30 Definitions. (a) The following are definitions of terms...

  7. 48 CFR 9904.404-30 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... Section 9904.404-30 Federal Acquisition Regulations System COST ACCOUNTING STANDARDS BOARD, OFFICE OF FEDERAL PROCUREMENT POLICY, OFFICE OF MANAGEMENT AND BUDGET PROCUREMENT PRACTICES AND COST ACCOUNTING STANDARDS COST ACCOUNTING STANDARDS 9904.404-30 Definitions. (a) The following are definitions of terms...

  8. 48 CFR 9904.405-30 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... Section 9904.405-30 Federal Acquisition Regulations System COST ACCOUNTING STANDARDS BOARD, OFFICE OF FEDERAL PROCUREMENT POLICY, OFFICE OF MANAGEMENT AND BUDGET PROCUREMENT PRACTICES AND COST ACCOUNTING STANDARDS COST ACCOUNTING STANDARDS 9904.405-30 Definitions. (a) The following are definitions of terms...

  9. 48 CFR 9904.406-30 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... Section 9904.406-30 Federal Acquisition Regulations System COST ACCOUNTING STANDARDS BOARD, OFFICE OF FEDERAL PROCUREMENT POLICY, OFFICE OF MANAGEMENT AND BUDGET PROCUREMENT PRACTICES AND COST ACCOUNTING STANDARDS COST ACCOUNTING STANDARDS 9904.406-30 Definitions. (a) The following are definitions of terms...

  10. 48 CFR 9904.402-30 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... Section 9904.402-30 Federal Acquisition Regulations System COST ACCOUNTING STANDARDS BOARD, OFFICE OF FEDERAL PROCUREMENT POLICY, OFFICE OF MANAGEMENT AND BUDGET PROCUREMENT PRACTICES AND COST ACCOUNTING STANDARDS COST ACCOUNTING STANDARDS 9904.402-30 Definitions. (a) The following are definitions of terms...

  11. 48 CFR 9904.401-30 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... Section 9904.401-30 Federal Acquisition Regulations System COST ACCOUNTING STANDARDS BOARD, OFFICE OF FEDERAL PROCUREMENT POLICY, OFFICE OF MANAGEMENT AND BUDGET PROCUREMENT PRACTICES AND COST ACCOUNTING STANDARDS COST ACCOUNTING STANDARDS 9904.401-30 Definitions. (a) The following are definitions of terms...

  12. 48 CFR 9904.409-30 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... Section 9904.409-30 Federal Acquisition Regulations System COST ACCOUNTING STANDARDS BOARD, OFFICE OF FEDERAL PROCUREMENT POLICY, OFFICE OF MANAGEMENT AND BUDGET PROCUREMENT PRACTICES AND COST ACCOUNTING STANDARDS COST ACCOUNTING STANDARDS 9904.409-30 Definitions. (a) The following are definitions of terms...

  13. 48 CFR 9904.407-30 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... Section 9904.407-30 Federal Acquisition Regulations System COST ACCOUNTING STANDARDS BOARD, OFFICE OF FEDERAL PROCUREMENT POLICY, OFFICE OF MANAGEMENT AND BUDGET PROCUREMENT PRACTICES AND COST ACCOUNTING STANDARDS COST ACCOUNTING STANDARDS 9904.407-30 Definitions. (a) The following are definitions of terms...

  14. 48 CFR 9904.403-30 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... Section 9904.403-30 Federal Acquisition Regulations System COST ACCOUNTING STANDARDS BOARD, OFFICE OF FEDERAL PROCUREMENT POLICY, OFFICE OF MANAGEMENT AND BUDGET PROCUREMENT PRACTICES AND COST ACCOUNTING STANDARDS COST ACCOUNTING STANDARDS 9904.403-30 Definitions. (a) The following are definitions of terms...

  15. 48 CFR 9.501 - Definition.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Definition. 9.501 Section... CONTRACTOR QUALIFICATIONS Organizational and Consultant Conflicts of Interest 9.501 Definition. Marketing... facilities); (3) Routine legal, actuarial, auditing, and accounting services; and (4) Training services. [55...

  16. 48 CFR 22.1001 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... determination of minimum wages or fringe benefits made under sections 2(a) or 4(c) of the Act (41 U.S.C. 351(a... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Definitions. 22.1001....1001 Definitions. As used in this subpart— Act or Service Contract Act means the Service Contract Act...

  17. 48 CFR 3433.101 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... GENERAL CONTRACTING REQUIREMENTS PROTESTS, DISPUTES, AND APPEALS Protests 3433.101 Definitions. Filed, as... Accounting Office (GAO), or the General Services Administration Board of Contract Appeals (GSBCA). ... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Definitions. 3433.101...

  18. 42 CFR 434.2 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... ASSISTANCE PROGRAMS CONTRACTS General Provisions § 434.2 Definitions. As used in this part, unless the... 42 Public Health 4 2010-10-01 2010-10-01 false Definitions. 434.2 Section 434.2 Public Health... to reimbursement formulas or accounting systems. [48 FR 54020, Nov. 30, 1983; 48 FR 55128, Dec. 9...

  19. 48 CFR 1830.7002-1 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... GENERAL CONTRACTING REQUIREMENTS COST ACCOUNTING STANDARDS ADMINISTRATION Facilities Capital Employed for Facilities in Use and For Facilities Under Construction 1830.7002-1 Definitions. (a) Cost of money rate is... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Definitions. 1830.7002-1...

  20. 5 CFR 10.1 - Definitions.

    Science.gov (United States)

    2010-01-01

    ... the General Accounting Office; and (b) 'Merit system principles' means the principles for Federal... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Definitions. 10.1 Section 10.1... AUTHORITY TO REVIEW PERSONNEL MANAGEMENT PROGRAMS (RULE X) § 10.1 Definitions. For purposes of this rule— (a...

  1. 48 CFR 3.801 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... consistent with the amount normally paid for such services in the private sector. Recipient includes the... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Definitions. 3.801 Section... Federal Transactions 3.801 Definitions. As used in this subpart— Agency means executive agency as defined...

  2. 48 CFR 18.001 - Definition.

    Science.gov (United States)

    2010-10-01

    ... CONTRACT TYPES EMERGENCY ACQUISITIONS 18.001 Definition. Emergency acquisition flexibilities, as used in... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Definition. 18.001 Section... President issues an emergency declaration, or a major disaster declaration. [71 FR 38248, July 5, 2006, as...

  3. 48 CFR 9.301 - Definition.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Definition. 9.301 Section... CONTRACTOR QUALIFICATIONS First Article Testing and Approval 9.301 Definition. Approval, as used in this subpart, means the contracting officer's written notification to the contractor accepting the test results...

  4. Satellite Power Systems (SPS) concept definition study. Volume 5: Special emphasis studies. [rectenna and solar power satellite design studies

    Science.gov (United States)

    Hanley, G. M.

    1980-01-01

    Satellite configurations based on the Satellite Power System baseline requirements were analyzed and a preferred concept selected. A satellite construction base was defined, precursor operations incident to establishment of orbital support facilities identified, and the satellite construction sequence and procedures developed. Rectenna construction requirement were also addressed. Mass flow to orbit requirements were revised and traffic models established based on construction of 60 instead of 120 satellites. Analyses were conducted to determine satellite control, resources, manufacturing, and propellant requirements. The impact of the laser beam used for space-to-Earth power transmission upon the intervening atmosphere was examined as well as the inverse effect. The significant space environments and their effects on spacecraft components were investigated to define the design and operational limits imposed by the environments on an orbit transfer vehicle. The results show that LEO altitude 300 nmi and transfer orbit duration 6 months are preferrable.

  5. Solar radiation and cooling load calculation for radiant systems: Definition and evaluation of the Direct Solar Load

    DEFF Research Database (Denmark)

    Causone, Francesco; Corgnati, Stefano P.; Filippi, Marco

    2010-01-01

    The study of the influence of solar radiation on the built environment is a basic issue in building physics and currently it is extremely important because glazed envelopes are widely used in contemporary architecture. In the present study, the removal of solar heat gains by radiant cooling systems...... is investigated. Particular attention is given to the portion of solar radiation converted to cooling load, without taking part in thermal absorption phenomena due to the thermal mass of the room. This specific component of the cooling load is defined as the Direct Solar Load. A simplified procedure to correctly...... calculate the magnitude of the Direct Solar Load in cooling load calculations is proposed and it is implemented with the Heat Balance method and the Radiant Time Series method. The F ratio of the solar heat gains directly converted to cooling load, in the case of a low thermal mass radiant ceiling...

  6. Large Deployable Reflector (LDR) system concept and technology definition study. Volume 2: Technology assessment and technology development plan

    Science.gov (United States)

    Agnew, Donald L.; Jones, Peter A.

    1989-01-01

    A study was conducted to define reasonable and representative LDR system concepts for the purpose of defining a technology development program aimed at providing the requisite technological capability necessary to start LDR development by the end of 1991. This volume presents thirteen technology assessments and technology development plans, as well as an overview and summary of the LDR concepts. Twenty-two proposed augmentation projects are described (selected from more than 30 candidates). The five LDR technology areas most in need of supplementary support are: cryogenic cooling; astronaut assembly of the optically precise LDR in space; active segmented primary mirror; dynamic structural control; and primary mirror contamination control. Three broad, time-phased, five-year programs were synthesized from the 22 projects, scheduled, and funding requirements estimated.

  7. High definition versus standard definition white light endoscopy for detecting dysplasia in patients with Barrett's esophagus.

    Science.gov (United States)

    Sami, S S; Subramanian, V; Butt, W M; Bejkar, G; Coleman, J; Mannath, J; Ragunath, K

    2015-01-01

    High-definition endoscopy systems provide superior image resolution. The aim of this study was to assess the utility of high definition compared with standard definition endoscopy system for detecting dysplastic lesions in patients with Barrett's esophagus. A retrospective cohort study of patients with non-dysplastic Barrett's esophagus undergoing routine surveillance was performed. Data were retrieved from the central hospital electronic database. Procedures performed for non-surveillance indications, Barrett's esophagus Prague C0M1 classification with no specialized intestinal metaplasia on histology, patients diagnosed with any dysplasia or cancer on index endoscopy, and procedures using advanced imaging techniques were excluded. Logistic regression models were constructed to estimate adjusted odds ratios and 95% confidence intervals comparing outcomes with standard definition and high-definition systems. The high definition was superior to standard definition system in targeted detection of all dysplastic lesions (odds ratio 3.27, 95% confidence interval 1.27-8.40) as well as overall dysplasia detected on both random and target biopsies (odds ratio 2.36, 95% confidence interval 1.50-3.72). More non-dysplastic lesions were detected with the high-definition system (odds ratio 1.16, 95% confidence interval 1.01-1.33). There was no difference between high definition and standard definition endoscopy in the overall (random and target) high-grade dysplasia or cancers detected (odds ratio 0.93, 95% confidence interval 0.83-1.04). Trainee endoscopists, number of biopsies taken, and male sex were all significantly associated with a higher yield for dysplastic lesions. The use of the high-definition endoscopy system is associated with better targeted detection of any dysplasia during routine Barrett's esophagus surveillance. However, high-definition endoscopy cannot replace random biopsies at present time. © 2014 International Society for Diseases of the Esophagus.

  8. [Definition of medical competence. The point of view of chronically-ill patients in the Andalusian public healthcare system (Spain)].

    Science.gov (United States)

    Prieto Rodríguez, M Ángeles; Danet Danet, Alina; Escudero Carretero, María J; Ruiz Azarola, Ainhoa; Pérez Corral, Olivia; García Toyos, Noelia

    2012-01-01

    To identify the attributes used by chronically-ill patients to describe physicians' competence in the public healthcare system in Andalucia. A total of 147 chronically-ill patients and their relatives were included in this qualitative study. Focal groups and in-depth interviews were performed in health centers and outpatient centers in Granada, Malaga, Seville, Cadiz and Cordoba between 2007 and 2008. Content analysis was carried out using Nudist Vivo. The participants defined medical competence as combining elements of technical ability and knowledge (awareness of and interest in the disease, continuity of follow-up and requesting specific tests) with interpersonal skills related to communication, information (informing, listening, trust, prompting questions) and attention (courtesy, cordiality, respect, interest and approachability). Primary care was expected to provide a close relationship, personalized treatment, information, drug prescription, and referral to specialized care. Specialized care was expected to provide an accurate diagnosis and appropriate treatment, information and follow-up. Highly valued aspects of emergency care were symptom relief, accurate diagnosis, referral to specialists and courtesy. Chronically-ill patients based their evaluation of medical competence on technical and interpersonal skills. Copyright © 2011 SESPAS. Published by Elsevier Espana. All rights reserved.

  9. Definitive intensity-modulated radiotherapy concurrent with systemic therapy for oropharyngeal squamous cell carcinoma: Outcomes from an integrated regional Australian cancer centre

    International Nuclear Information System (INIS)

    Rahbari, Reza M.; McKay, Michael; Dwyer, Patrick; Winkley, Lauren; Hill, Jacques; Last, Andrew; Tahir, Abdul R.M.; Shakespeare, Thomas P.

    2016-01-01

    Oropharyngeal squamous cell carcinoma (OPSCC) incidence has increased over the past two decades largely because of an increase in human papilloma virus (HPV)-related OPSCC. We report here outcomes of definitive radiation therapy for OPSCC with simultaneous integrated boost intensity-modulated radiotherapy (IMRT) in a regional Australian cancer centre. We retrospectively reviewed electronic medical records (EMR) of all patients treated with IMRT for head and neck cancer. We included patients who received a curative intent IMRT for OPSCC (2010–2014). Of 61 patients, 80% were men, and the median age was 57 years. Ninety percent of our patients received concurrent systemic therapy, and 68% were p16 positive. The median radiotherapy dose received was 70 Gy in 35 fractions. The median follow up for surviving patients was 22 months. Twenty-four month actuarial data show that the loco-regional recurrence free, metastasis-free MFS, cancer-specific (CaSS) and overall survival percentages were 98.3%, 92.6%, 91% and 90.3%, respectively. We did not observe grades 4 or 5 acute or late toxicities, and 10 patients (16.2%) exhibited persistent grade 3 toxicity 6 months after completing the treatment. The results from curative IMRTs for OPSCC delivered in a regional cancer centre are comparable with results published by tertiary referral centres. A long-term follow up of this patient cohort will continue for further analyses and comparisons with tertiary centres.

  10. Astrionic system optimization and modular astrionics for NASA missions after 1974. Preliminary definition of astrionic system for space tug Mission Vehicle Payload (MVP)

    Science.gov (United States)

    1970-01-01

    Results of preliminary studies to define the space tug astrionic system, subsystems, and components to meet requirements for a variety of missions are reported. Emphasis is placed on demonstration of the modular astrionics approach in the design of the space tug astrionic system.

  11. LDR structural experiment definition

    Science.gov (United States)

    Russell, Richard A.; Gates, Richard M.

    1988-01-01

    A study was performed to develop the definition of a structural flight experiment for a large precision segmented reflector that would utilize the Space Station. The objective of the study was to use the Large Deployable Reflector (LDR) baseline configuration for focusing on experiment definition activity which would identify the Space Station accommodation requirements and interface constraints. Results of the study defined three Space Station based experiments to demonstrate the technologies needed for an LDR type structure. The basic experiment configurations are the same as the JPL baseline except that the primary mirror truss is 10 meters in diameter instead of 20. The primary objectives of the first experiment are to construct the primary mirror support truss and to determine its structural and thermal characteristics. Addition of the optical bench, thermal shield and primary mirror segments and alignment of the optical components occur on the second experiment. The structure will then be moved to the payload pointing system for pointing, optical control and scientific optical measurement for the third experiment.

  12. C++QEDv2: The multi-array concept and compile-time algorithms in the definition of composite quantum systems

    Science.gov (United States)

    Vukics, András

    2012-06-01

    the actual data scales with the system dimension for state-vector manipulations, and the square of the dimension for density-operator manipulations. This might easily be GBs, and often the memory of the machine limits the size of the simulated system. Classification: 4.3, 4.13, 6.2, 20 External routines: Boost C++ libraries (http://www.boost.org/), GNU Scientific Library (http://www.gnu.org/software/gsl/), Blitz++ (http://www.oonumerics.org/blitz/), Linear Algebra Package - Flexible Library for Efficient Numerical Solutions (http://flens.sourceforge.net/). Nature of problem: Definition of (open) composite quantum systems out of elementary building blocks [1]. Manipulation of such systems, with emphasis on dynamical simulations such as Master-equation evolution [2] and Monte Carlo wave-function simulation [3]. Solution method: Master equation, Monte Carlo wave-function method. Restrictions: Total dimensionality of the system. Master equation - few thousands. Monte Carlo wave-function trajectory - several millions. Unusual features: Because of the heavy use of compile-time algorithms, compilation of programs written in the framework may take a long time and much memory (up to several GBs). Additional comments: The framework is not a program, but provides and implements an application-programming interface for developing simulations in the indicated problem domain. Supplementary information: http://cppqed.sourceforge.net/. Running time: Depending on the magnitude of the problem, can vary from a few seconds to weeks.

  13. Developing a comprehensive definition of sustainability.

    Science.gov (United States)

    Moore, Julia E; Mascarenhas, Alekhya; Bain, Julie; Straus, Sharon E

    2017-09-02

    Understanding sustainability is one of the significant implementation science challenges. One of the big challenges in researching sustainability is the lack of consistent definitions in the literature. Most implementation studies do not present a definition of sustainability, even when assessing sustainability. The aim of the current study was to systematically develop a comprehensive definition of sustainability based on definitions already used in the literature. We searched for knowledge syntheses of sustainability and abstracted sustainability definitions from the articles identified through any relevant systematic and scoping reviews. The constructs in the abstracted sustainability definitions were mapped to an existing definition. The comprehensive definition of sustainability was revised to include emerging constructs. We identified four knowledge syntheses of sustainability, which identified 209 original articles. Of the 209 articles, 24 (11.5%) included a definition of sustainability. These definitions were mapped to three constructs from an existing definition, and nine new constructs emerged. We reviewed all constructs and created a revised definition: (1) after a defined period of time, (2) a program, clinical intervention, and/or implementation strategies continue to be delivered and/or (3) individual behavior change (i.e., clinician, patient) is maintained; (4) the program and individual behavior change may evolve or adapt while (5) continuing to produce benefits for individuals/systems. All 24 definitions were remapped to the comprehensive definition (percent agreement among three coders was 94%). Of the 24 definitions, 17 described the continued delivery of a program (70.8%), 17 mentioned continued outcomes (70.8%), 13 mentioned time (54.2%), 8 addressed the individual maintenance of a behavior change (33.3%), and 6 described the evolution or adaptation (25.0%). We drew from over 200 studies to identify 24 existing definitions of sustainability

  14. Power Extension Package (PEP) system definition extension, orbital service module systems analysis study. Volume 9: PEP design, development and test plans

    Science.gov (United States)

    1979-01-01

    A plan for the production of two PEP flight systems is defined. The task's milestones are described. Provisions for the development and assembly of new ground support equipment required for both testing and launch operations are included.

  15. TRANSWRAP II: problem definition manual

    International Nuclear Information System (INIS)

    Knittle, D.E.

    1981-02-01

    The TRANSWRAP II computer code, written in Fortran IV and described in this Problem Definition Manual, was developed to analytically predict the magnitude of pressure pulses of large scale sodium-wate reactions in LMFBR secondary systems. It is currently being used for the Clinch River Breeder Reactor Program. The code provides the options, flexibility and features necessary to consider any system configuration. The code methodology has been validated with the aid of extensive sodium-water reaction test programs

  16. Definition, analysis and development of an optical data distribution network for integrated avionics and control systems. Part 2: Component development and system integration

    Science.gov (United States)

    Yen, H. W.; Morrison, R. J.

    1984-01-01

    Fiber optic transmission is emerging as an attractive concept in data distribution onboard civil aircraft. Development of an Optical Data Distribution Network for Integrated Avionics and Control Systems for commercial aircraft will provide a data distribution network that gives freedom from EMI-RFI and ground loop problems, eliminates crosstalk and short circuits, provides protection and immunity from lightning induced transients and give a large bandwidth data transmission capability. In addition there is a potential for significantly reducing the weight and increasing the reliability over conventional data distribution networks. Wavelength Division Multiplexing (WDM) is a candidate method for data communication between the various avionic subsystems. With WDM all systems could conceptually communicate with each other without time sharing and requiring complicated coding schemes for each computer and subsystem to recognize a message. However, the state of the art of optical technology limits the application of fiber optics in advanced integrated avionics and control systems. Therefore, it is necessary to address the architecture for a fiber optics data distribution system for integrated avionics and control systems as well as develop prototype components and systems.

  17. Definition af primitiver

    DEFF Research Database (Denmark)

    Christensen, Morten

    1997-01-01

    Når et elektrisk system skal opstilles på arrayform, er det vigtig først at lave en række fornuftige modeller for de primitiver, der indgår i netværket. Disse modeller skal muligvis revideres, når man begynder at sammensætte dem til et netværk, men laver man opstillingen grundigt på et tidligt...... tidspunkt, kan der spares meget tid senere, hvor det er besværligt at definerer primitiverne helt om.I denne rapport er de primitiver, der skal bruges til Sydkrafts net gennemgået. Der er taget stilling til hver enkelt tilstand for de forskellige primitiver. Dette er gjort for at få en definition, som er...

  18. A computational simulated control system for a high-force pneumatic muscle actuator: system definition and application as an augmented orthosis.

    Science.gov (United States)

    Gerschutz, Maria J; Phillips, Chandler A; Reynolds, David B; Repperger, Daniel W

    2009-04-01

    High-force pneumatic muscle actuators (PMAs) are used for force assistance with minimal displacement applications. However, poor control due to dynamic nonlinearities has limited PMA applications. A simulated control system is developed consisting of: (1) a controller relating an input position angle to an output proportional pressure regulator voltage, (2) a phenomenological model of the PMA with an internal dynamic force loop (system time constant information), (3) a physical model of a human sit-to-stand task and (4) an external position angle feed-back loop. The results indicate that PMA assistance regarding the human sit-to-stand task is feasible within a specified PMA operational pressure range.

  19. Power Extension Package (PEP) system definition extension, orbital service module systems analysis study. Volume 7: PEP logistics and training plan requirements

    Science.gov (United States)

    1979-01-01

    Recommendations for logistics activities and logistics planning are presented based on the assumption that a system prime contractor will perform logistics functions to support all program hardware and will implement a logistics system to include the planning and provision of products and services to assure cost effective coverage of the following: maintainability; maintenance; spares and supply support; fuels; pressurants and fluids; operations and maintenance documentation training; preservation, packaging and packing; transportation and handling; storage; and logistics management information reporting. The training courses, manpower, materials, and training aids required will be identified and implemented in a training program.

  20. 49 CFR 552.12 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... subpart, the following definitions apply: (a) Dynamic automatic suppression system (DASS) means a portion... will be suppressed by the DASS if a vehicle occupant enters the zone under specified conditions. (c...

  1. 5 CFR 451.102 - Definitions.

    Science.gov (United States)

    2010-01-01

    ... Definitions. Award means something bestowed or an action taken to recognize and reward individual or team..., performance goals, measurement systems, award formulas, or payout schedules. Award program means the specific...

  2. Definition of Terrorist Act under Eth Law

    African Journals Online (AJOL)

    Wondwossen_D_K

    advanced legal system and rule of law. This article is ..... environmental causes could fall within the terrorism Act 2000 definition.20 ..... Convention for the Suppression of Unlawful Seizure of Aircraft, done at ..... control of any public services.

  3. 48 CFR 239.7101 - Definition.

    Science.gov (United States)

    2010-10-01

    ... OF DEFENSE SPECIAL CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Security and Privacy for Computer Systems 239.7101 Definition. Information assurance, as used in this subpart, means... incorporating protection, detection, and reaction capabilities. ...

  4. Definitive intensity-modulated radiotherapy concurrent with systemic therapy for oropharyngeal squamous cell carcinoma: Outcomes from an integrated regional Australian cancer centre.

    Science.gov (United States)

    Masoud Rahbari, Reza; Winkley, Lauren; Hill, Jacques; Tahir, Abdul Rahim Mohammed; McKay, Michael; Last, Andrew; Shakespeare, Thomas P; Dwyer, Patrick

    2016-06-01

    Oropharyngeal squamous cell carcinoma (OPSCC) incidence has increased over the past two decades largely because of an increase in human papilloma virus (HPV)-related OPSCC. We report here outcomes of definitive radiation therapy for OPSCC with simultaneous integrated boost intensity-modulated radiotherapy (IMRT) in a regional Australian cancer centre. We retrospectively reviewed electronic medical records (EMR) of all patients treated with IMRT for head and neck cancer. We included patients who received a curative intent IMRT for OPSCC (2010-2014). Of 61 patients, 80% were men, and the median age was 57 years. Ninety percent of our patients received concurrent systemic therapy, and 68% were p16 positive. The median radiotherapy dose received was 70 Gy in 35 fractions. The median follow up for surviving patients was 22 months. Twenty-four month actuarial data show that the loco-regional recurrence free, metastasis-free MFS, cancer-specific (CaSS) and overall survival percentages were 98.3%, 92.6%, 91% and 90.3%, respectively. We did not observe grades 4 or 5 acute or late toxicities, and 10 patients (16.2%) exhibited persistent grade 3 toxicity 6 months after completing the treatment. The results from curative IMRTs for OPSCC delivered in a regional cancer centre are comparable with results published by tertiary referral centres. A long-term follow up of this patient cohort will continue for further analyses and comparisons with tertiary centres. © 2016 The Royal Australian and New Zealand College of Radiologists.

  5. The Johnson Space Center Management Information Systems (JSCMIS). 1: Requirements Definition and Design Specifications for Versions 2.1 and 2.1.1. 2: Documented Test Scenario Environments. 3: Security Design and Specifications

    Science.gov (United States)

    1986-01-01

    The Johnson Space Center Management Information System (JSCMIS) is an interface to computer data bases at NASA Johnson which allows an authorized user to browse and retrieve information from a variety of sources with minimum effort. This issue gives requirements definition and design specifications for versions 2.1 and 2.1.1, along with documented test scenario environments, and security object design and specifications.

  6. Product Structure, the Heart of Product Definition

    Science.gov (United States)

    DeHoog, C., Jr.

    1999-01-01

    This paper describes the LMMSS Product Definition System (PDS) philosophy and approach were the use of each item parts document or software can be traced to a specific end item (EI) serial/tail number of the product. It explains why a part-oriented approach to data organization and configuration management is required. The definition of part-oriented is that all appropriate product definition data products will be collected. Referenced and managed by their linkage/relationship to parts/items, The paper will touch upon how LMMSS store/controls product definition information under each project's top product designator in a two tiered approach. One tier for each product end item and another tier which contain/controls listings of drawings, documents. Specifications and standards that are required for hardware item definition.

  7. Definition of Videogames

    Directory of Open Access Journals (Sweden)

    Grant Tavinor

    2008-01-01

    Full Text Available Can videogames be defined? The new field of games studies has generated three somewhat competing models of videogaming that characterize games as new forms of gaming, narratives, and interactive fictions. When treated as necessary and sufficient condition definitions, however, each of the three approaches fails to pick out all and only videogames. In this paper I argue that looking more closely at the formal qualities of definition helps to set out the range of definitional options open to the games theorist. A disjunctive definition of videogaming seems the most appropriate of these definitional options. The disjunctive definition I offer here is motivated by the observation that there is more than one characteristic way of being a videogame.

  8. Integrated High-Level Waste System Planning - Utilizing an Integrated Systems Planning Approach to Ensure End-State Definitions are Met and Executed - 13244

    Energy Technology Data Exchange (ETDEWEB)

    Ling, Lawrence T. [URS-Savannah River Remediation, Savannah River Site, Building 766-H Room 2205, Aiken, SC 29808 (United States); Chew, David P. [URS-Savannah River Remediation, Savannah River Site, Building 766-H Room 2426, Aiken, SC 29808 (United States)

    2013-07-01

    The Savannah River Site (SRS) is a Department of Energy site which has produced nuclear materials for national defense, research, space, and medical programs since the 1950's. As a by-product of this activity, approximately 37 million gallons of high-level liquid waste containing approximately 292 million curies of radioactivity is stored on an interim basis in 45 underground storage tanks. Originally, 51 tanks were constructed and utilized to support the mission. Four tanks have been closed and taken out of service and two are currently undergoing the closure process. The Liquid Waste System is a highly integrated operation involving safely storing liquid waste in underground storage tanks; removing, treating, and dispositioning the low-level waste fraction in grout; vitrifying the higher activity waste at the Defense Waste Processing Facility; and storing the vitrified waste in stainless steel canisters until permanent disposition. After waste removal and processing, the storage and processing facilities are decontaminated and closed. A Liquid Waste System Plan (hereinafter referred to as the Plan) was developed to integrate and document the activities required to disposition legacy and future High-Level Waste and to remove from service radioactive liquid waste tanks and facilities. It establishes and records a planning basis for waste processing in the liquid waste system through the end of the program mission. The integrated Plan which recognizes the challenges of constrained funding provides a path forward to complete the liquid waste mission within all regulatory and legal requirements. The overarching objective of the Plan is to meet all Federal Facility Agreement and Site Treatment Plan regulatory commitments on or ahead of schedule while preserving as much life cycle acceleration as possible through incorporation of numerous cost savings initiatives, elimination of non-essential scope, and deferral of other scope not on the critical path to compliance

  9. Integrated High-Level Waste System Planning - Utilizing an Integrated Systems Planning Approach to Ensure End-State Definitions are Met and Executed - 13244

    International Nuclear Information System (INIS)

    Ling, Lawrence T.; Chew, David P.

    2013-01-01

    The Savannah River Site (SRS) is a Department of Energy site which has produced nuclear materials for national defense, research, space, and medical programs since the 1950's. As a by-product of this activity, approximately 37 million gallons of high-level liquid waste containing approximately 292 million curies of radioactivity is stored on an interim basis in 45 underground storage tanks. Originally, 51 tanks were constructed and utilized to support the mission. Four tanks have been closed and taken out of service and two are currently undergoing the closure process. The Liquid Waste System is a highly integrated operation involving safely storing liquid waste in underground storage tanks; removing, treating, and dispositioning the low-level waste fraction in grout; vitrifying the higher activity waste at the Defense Waste Processing Facility; and storing the vitrified waste in stainless steel canisters until permanent disposition. After waste removal and processing, the storage and processing facilities are decontaminated and closed. A Liquid Waste System Plan (hereinafter referred to as the Plan) was developed to integrate and document the activities required to disposition legacy and future High-Level Waste and to remove from service radioactive liquid waste tanks and facilities. It establishes and records a planning basis for waste processing in the liquid waste system through the end of the program mission. The integrated Plan which recognizes the challenges of constrained funding provides a path forward to complete the liquid waste mission within all regulatory and legal requirements. The overarching objective of the Plan is to meet all Federal Facility Agreement and Site Treatment Plan regulatory commitments on or ahead of schedule while preserving as much life cycle acceleration as possible through incorporation of numerous cost savings initiatives, elimination of non-essential scope, and deferral of other scope not on the critical path to compliance

  10. A general definition of trust

    OpenAIRE

    O'Hara, Kieron

    2012-01-01

    In this paper a definition and conceptual analysis of trust is given in terms of trustworthiness. Its focus will be as wide as possible, and will not be restricted to any particular type of trust. The aim is to show the key parameters that enable us to investigate and understand trust, thereby facilitating the development of systems, institutions and technologies to support, model or mimic trust. The paper will also show the strong connection between trust and trustworthiness, showing how the...

  11. Developing syndrome definitions based on consensus and current use

    Science.gov (United States)

    Dowling, John N; Baer, Atar; Buckeridge, David L; Cochrane, Dennis; Conway, Michael A; Elkin, Peter; Espino, Jeremy; Gunn, Julia E; Hales, Craig M; Hutwagner, Lori; Keller, Mikaela; Larson, Catherine; Noe, Rebecca; Okhmatovskaia, Anya; Olson, Karen; Paladini, Marc; Scholer, Matthew; Sniegoski, Carol; Thompson, David; Lober, Bill

    2010-01-01

    Objective Standardized surveillance syndromes do not exist but would facilitate sharing data among surveillance systems and comparing the accuracy of existing systems. The objective of this study was to create reference syndrome definitions from a consensus of investigators who currently have or are building syndromic surveillance systems. Design Clinical condition–syndrome pairs were catalogued for 10 surveillance systems across the United States and the representatives of these systems were brought together for a workshop to discuss consensus syndrome definitions. Results Consensus syndrome definitions were generated for the four syndromes monitored by the majority of the 10 participating surveillance systems: Respiratory, gastrointestinal, constitutional, and influenza-like illness (ILI). An important element in coming to consensus quickly was the development of a sensitive and specific definition for respiratory and gastrointestinal syndromes. After the workshop, the definitions were refined and supplemented with keywords and regular expressions, the keywords were mapped to standard vocabularies, and a web ontology language (OWL) ontology was created. Limitations The consensus definitions have not yet been validated through implementation. Conclusion The consensus definitions provide an explicit description of the current state-of-the-art syndromes used in automated surveillance, which can subsequently be systematically evaluated against real data to improve the definitions. The method for creating consensus definitions could be applied to other domains that have diverse existing definitions. PMID:20819870

  12. AP1000 passive core cooling system pre-operational tests procedure definition and simulation by means of Relap5 Mod. 3.3 computer code

    Energy Technology Data Exchange (ETDEWEB)

    Lioce, D., E-mail: donato.lioce@aen.ansaldo.it [Ansaldo Nucleare S.p.A., Corso F. M. Perrone 25, 16161, Genova (Italy); Asztalos, M., E-mail: asztalmj@westinghouse.com [Westinghouse Electric Company, Cranberry Twp, PA 16066 (United States); Alemberti, A., E-mail: alessandro.alemberti@aen.ansaldo.it [Ansaldo Nucleare S.p.A., Corso F. M. Perrone 25, 16161, Genova (Italy); Barucca, L. [Ansaldo Nucleare S.p.A., Corso F. M. Perrone 25, 16161, Genova (Italy); Frogheri, M., E-mail: monicalinda.frogheri@aen.ansaldo.it [Ansaldo Nucleare S.p.A., Corso F. M. Perrone 25, 16161, Genova (Italy); Saiu, G., E-mail: gianfranco.saiu@aen.ansaldo.it [Ansaldo Nucleare S.p.A., Corso F. M. Perrone 25, 16161, Genova (Italy)

    2012-09-15

    Highlights: Black-Right-Pointing-Pointer Two AP1000 Core Make-up Tanks pre-operational tests procedures have been defined. Black-Right-Pointing-Pointer The two tests have been simulated by means of the Relap5 computer code. Black-Right-Pointing-Pointer Results show the tests can be successfully performed with the selected procedures. - Abstract: The AP1000{sup Registered-Sign} plant is an advanced Pressurized Water Reactor designed and developed by Westinghouse Electric Company which relies on passive safety systems for core cooling, containment isolation and containment cooling, and maintenance of main control room emergency habitability. The AP1000 design obtained the Design Certification by NRC in January 2006, as Appendix D of 10 CFR Part 52, and it is being built in two locations in China. The AP1000 plant will be the first commercial nuclear power plant to rely on completely passive safety systems for core cooling and its licensing process requires the proper operation of these systems to be demonstrated through some pre-operational tests to be conducted on the real plant. The overall objective of the test program is to demonstrate that the plant has been constructed as designed, that the systems perform consistently with the plant design, and that activities culminating in operation at full licensed power including initial fuel load, initial criticality, and power increase to full load are performed in a controlled and safe manner. Within this framework, Westinghouse Electric Company and its partner Ansaldo Nucleare S.p.A. have strictly collaborated, being Ansaldo Nucleare S.p.A. in charge of the simulation of some pre-operational tests and supporting Westinghouse in the definition of tests procedures. This paper summarizes the work performed at Ansaldo Nucleare S.p.A. in collaboration with Westinghouse Electric Company for the Core Makeup Tank (CMT) tests, i.e. the CMTs hot recirculation test and the CMTs draindown test. The test procedure for the two

  13. AP1000 passive core cooling system pre-operational tests procedure definition and simulation by means of Relap5 Mod. 3.3 computer code

    International Nuclear Information System (INIS)

    Lioce, D.; Asztalos, M.; Alemberti, A.; Barucca, L.; Frogheri, M.; Saiu, G.

    2012-01-01

    Highlights: ► Two AP1000 Core Make-up Tanks pre-operational tests procedures have been defined. ► The two tests have been simulated by means of the Relap5 computer code. ► Results show the tests can be successfully performed with the selected procedures. - Abstract: The AP1000 ® plant is an advanced Pressurized Water Reactor designed and developed by Westinghouse Electric Company which relies on passive safety systems for core cooling, containment isolation and containment cooling, and maintenance of main control room emergency habitability. The AP1000 design obtained the Design Certification by NRC in January 2006, as Appendix D of 10 CFR Part 52, and it is being built in two locations in China. The AP1000 plant will be the first commercial nuclear power plant to rely on completely passive safety systems for core cooling and its licensing process requires the proper operation of these systems to be demonstrated through some pre-operational tests to be conducted on the real plant. The overall objective of the test program is to demonstrate that the plant has been constructed as designed, that the systems perform consistently with the plant design, and that activities culminating in operation at full licensed power including initial fuel load, initial criticality, and power increase to full load are performed in a controlled and safe manner. Within this framework, Westinghouse Electric Company and its partner Ansaldo Nucleare S.p.A. have strictly collaborated, being Ansaldo Nucleare S.p.A. in charge of the simulation of some pre-operational tests and supporting Westinghouse in the definition of tests procedures. This paper summarizes the work performed at Ansaldo Nucleare S.p.A. in collaboration with Westinghouse Electric Company for the Core Makeup Tank (CMT) tests, i.e. the CMTs hot recirculation test and the CMTs draindown test. The test procedure for the two selected tests has been defined and, in order to perform the pre-operational tests simulations, a

  14. Definition of postprandial lipaemia

    DEFF Research Database (Denmark)

    Kolovou, Genovefa D; Mikhailidis, Dimitri P; Nordestgaard, Børge G

    2011-01-01

    At the present time, there is no widely agreed definition of postprandial lipaemia (PPL). This lack of a shared definition limits the identification and treatment of patients with exaggerated PPL as well as the evaluation of potential therapeutic agents. PPL is a complex syndrome characterized by...

  15. Productivity of Stream Definitions

    NARCIS (Netherlands)

    Endrullis, Jörg; Grabmayer, Clemens; Hendriks, Dimitri; Isihara, Ariya; Klop, Jan

    2007-01-01

    We give an algorithm for deciding productivity of a large and natural class of recursive stream definitions. A stream definition is called ‘productive’ if it can be evaluated continuously in such a way that a uniquely determined stream is obtained as the limit. Whereas productivity is undecidable

  16. Productivity of stream definitions

    NARCIS (Netherlands)

    Endrullis, J.; Grabmayer, C.A.; Hendriks, D.; Isihara, A.; Klop, J.W.

    2008-01-01

    We give an algorithm for deciding productivity of a large and natural class of recursive stream definitions. A stream definition is called ‘productive’ if it can be evaluated continually in such a way that a uniquely determined stream in constructor normal form is obtained as the limit. Whereas

  17. Engineering Definitional Interpreters

    DEFF Research Database (Denmark)

    Midtgaard, Jan; Ramsay, Norman; Larsen, Bradford

    2013-01-01

    A definitional interpreter should be clear and easy to write, but it may run 4--10 times slower than a well-crafted bytecode interpreter. In a case study focused on implementation choices, we explore ways of making definitional interpreters faster without expending much programming effort. We imp...

  18. Dynamics of Situation Definition

    Science.gov (United States)

    Park, Dongseop; Moro, Yuji

    2006-01-01

    Situation definition is the process and product of actors' interpretive activities toward a given situation. By reviewing a number of psychological studies conducted in experimental settings, we found that the studies have only explicated a part of the situation definition process and have neglected its dynamic aspects. We need to focus on the…

  19. Defending definitions of life.

    Science.gov (United States)

    Mix, Lucas John

    2015-01-01

    Over the past 10 years, it has become unpopular to talk about definitions of life, under the assumption that attempts at a precise definition are counterproductive. Recent attempts have failed to meet strict philosophical criteria for definitions and have failed to reach consensus. I argue that provisional definitions are necessary for clear communications. Our current knowledge of biology justifies a number of universal claims about the category of life. Whether or not "life" represents a natural category, it maps to a number of important, observable processes. Given the importance of those processes and the extent of our knowledge, plural explicit definitions of life (and related categories) will be necessary for progress in astrobiology and origin-of-life studies as well as biology in general. I propose concrete categories related to, but not necessarily coextensive with, life for clear communication and hypothesis formation: Woese life, Darwin life, Haldane life.

  20. 33 CFR 96.120 - Definitions.

    Science.gov (United States)

    2010-07-01

    ....120 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY VESSEL OPERATING REGULATIONS RULES FOR THE SAFE OPERATION OF VESSELS AND SAFETY MANAGEMENT SYSTEMS General § 96.120 Definitions... management operate in accordance with the approved safety management system. Safety Management System means a...

  1. 12 CFR 208.2 - Definitions.

    Science.gov (United States)

    2010-01-01

    ... Banking FEDERAL RESERVE SYSTEM BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM MEMBERSHIP OF STATE BANKING INSTITUTIONS IN THE FEDERAL RESERVE SYSTEM (REGULATION H) General Membership and Branching Requirements § 208.2 Definitions. For the purposes of this part: (a) Board of Directors means the governing...

  2. Hundi/hawala: the problem of definition

    OpenAIRE

    Marina B.V. Martin

    2009-01-01

    In contemporary times, hundi has collected countless labels; the international press has spurned innumerable villainous descriptions, the bulk of which have helped to perpetuate a dense fog of notoriety. The critical problem lies in definition. As there is an incomplete understanding of hundi's form and remit, there is also a rather limited understanding of why the system persists, set against the backdrop of modern banking. In many ways the problem of definition presented legal and financial...

  3. Definition of the mole (IUPAC Recommendation 2017)

    OpenAIRE

    Marquardt, Roberto; Meija, Juris; Mester, Zoltán; Towns, Marcy; Weir, Ron; Davis, Richard; Stohner, Jürgen

    2018-01-01

    In 2011 the General Conference on Weights and Measures (CGPM) noted the intention of the International Committee for Weights and Measures (CIPM) to revise the entire International System of Units (SI) by linking all seven base units to seven fundamental physical constants. Of particular interest to chemists, new definitions for the kilogram and the mole have been proposed. A recent IUPAC Technical Report discussed these new definitions in relation to immediate consequences for the chemical co...

  4. The definition of cross polarization

    DEFF Research Database (Denmark)

    Ludwig, Arthur

    1973-01-01

    There are at least three different definitions of cross polarization used in the literature. The alternative definitions are discussed with respect to several applications, and the definition which corresponds to one standard measurement practice is proposed as the best choice....

  5. Team errors: definition and taxonomy

    International Nuclear Information System (INIS)

    Sasou, Kunihide; Reason, James

    1999-01-01

    In error analysis or error management, the focus is usually upon individuals who have made errors. In large complex systems, however, most people work in teams or groups. Considering this working environment, insufficient emphasis has been given to 'team errors'. This paper discusses the definition of team errors and its taxonomy. These notions are also applied to events that have occurred in the nuclear power industry, aviation industry and shipping industry. The paper also discusses the relations between team errors and Performance Shaping Factors (PSFs). As a result, the proposed definition and taxonomy are found to be useful in categorizing team errors. The analysis also reveals that deficiencies in communication, resource/task management, excessive authority gradient, excessive professional courtesy will cause team errors. Handling human errors as team errors provides an opportunity to reduce human errors

  6. Automatic Definition Extraction and Crossword Generation From Spanish News Text

    Directory of Open Access Journals (Sweden)

    Jennifer Esteche

    2017-08-01

    Full Text Available This paper describes the design and implementation of a system that takes Spanish texts and generates crosswords (board and definitions in a fully automatic way using definitions extracted from those texts. Our solution divides the problem in two parts: a definition extraction module that applies pattern matching implemented in Python, and a crossword generation module that uses a greedy strategy implemented in Prolog. The system achieves 73% precision and builds crosswords similar to those built by humans.

  7. Initial evaluation tests of General Electric Company 26.5 ampere-hour nickel-cadmium spacecraft cells with auxiliary electrodes for the TIROS-N and NOAA-A satellites

    Science.gov (United States)

    Harkness, J. D.

    1978-01-01

    This evaluation test program had the purpose to insure that all cells put into the life cycle program are of high quality by the screening of cells found to have electrolyte leakage, internal shorts, low capacity, or inability of any cell to recover its open-circuit voltage above 1.150 volts during the internal short test. Test limits specify those values at which a cell is to be terminated from charge or discharge. Requirements are referenced to as normally expected values based on past performance of aerospace nickel-cadmium cells with demonstrated life characteristics. A requirement does not constitute a limit for discontinuance from test.

  8. Genomic definition of species

    Energy Technology Data Exchange (ETDEWEB)

    Crkvenjakov, R.; Drmanac, R.

    1991-07-01

    The subject of this paper is the definition of species based on the assumption that genome is the fundamental level for the origin and maintenance of biological diversity. For this view to be logically consistent it is necessary to assume the existence and operation of the new law which we call genome law. For this reason the genome law is included in the explanation of species phenomenon presented here even if its precise formulation and elaboration are left for the future. The intellectual underpinnings of this definition can be traced to Goldschmidt. We wish to explore some philosophical aspects of the definition of species in terms of the genome. The point of proposing the definition on these grounds is that any real advance in evolutionary theory has to be correct in both its philosophy and its science.

  9. Definition of successful defibrillation

    NARCIS (Netherlands)

    Koster, Rudolph W.; Walker, Robert G.; van Alem, Anouk P.

    2006-01-01

    OBJECTIVES: The definition of defibrillation shock "success" endorsed by the International Liaison Committee on Resuscitation since the publication of Guidelines 2000 for Cardiopulmonary Resuscitation and Emergency Cardiac Care has been removal of ventricular fibrillation at 5 secs after shock

  10. Urogenital tuberculosis: definition and classification.

    Science.gov (United States)

    Kulchavenya, Ekaterina

    2014-10-01

    To improve the approach to the diagnosis and management of urogenital tuberculosis (UGTB), we need clear and unique classification. UGTB remains an important problem, especially in developing countries, but it is often an overlooked disease. As with any other infection, UGTB should be cured by antibacterial therapy, but because of late diagnosis it may often require surgery. Scientific literature dedicated to this problem was critically analyzed and juxtaposed with the author's own more than 30 years' experience in tuberculosis urology. The conception, terms and definition were consolidated into one system; classification stage by stage as well as complications are presented. Classification of any disease includes dispersion on forms and stages and exact definitions for each stage. Clinical features and symptoms significantly vary between different forms and stages of UGTB. A simple diagnostic algorithm was constructed. UGTB is multivariant disease and a standard unified approach to it is impossible. Clear definition as well as unique classification are necessary for real estimation of epidemiology and the optimization of therapy. The term 'UGTB' has insufficient information in order to estimate therapy, surgery and prognosis, or to evaluate the epidemiology.

  11. 33 CFR 183.505 - Definitions.

    Science.gov (United States)

    2010-07-01

    ... SAFETY BOATS AND ASSOCIATED EQUIPMENT Fuel Systems General § 183.505 Definitions. As used in this subpart... system means the entire assembly of the fuel fill, vent, tank, and distribution components, including... a boat floats in calm water, with each fuel tank filled to its rated capacity, but with no person or...

  12. 45 CFR 1182.2 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... INSTITUTE OF MUSEUM AND LIBRARY SERVICES IMPLEMENTATION OF THE PRIVACY ACT OF 1974 § 1182.2 Definitions. The... Institute of Museum and Library Services; (g) Institute system means a system of records maintained by the... these recordkeeping functions. The term also includes exercise of control over and, therefore...

  13. 48 CFR 47.001 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Definitions. 47.001 Section 47.001 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT... a receipt of goods, as documentary evidence of title, for clearing customs, and generally used as a...

  14. 40 CFR 142.2 - Definitions.

    Science.gov (United States)

    2010-07-01

    .... Public water system or PWS means a system for the provision to the public of water for human consumption... piping and plumbing caused by water quality are excluded from this definition. Municipality means a city... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL...

  15. 21 CFR 120.3 - Definitions.

    Science.gov (United States)

    2010-04-01

    ... CONSUMPTION HAZARD ANALYSIS AND CRITICAL CONTROL POINT (HACCP) SYSTEMS General Provisions § 120.3 Definitions... and technical information to determine whether the HACCP plan, when properly implemented, will... monitoring, that establish the validity of the HACCP plan and that the system is operating according to the...

  16. 12 CFR 270.2 - Definitions.

    Science.gov (United States)

    2010-01-01

    ... Banking FEDERAL RESERVE SYSTEM (CONTINUED) FEDERAL OPEN MARKET COMMITTEE OPEN MARKET OPERATIONS OF FEDERAL RESERVE BANKS Regulations Relating to Open Market Operations of Federal Reserve Banks § 270.2 Definitions... as to principal and interest by, any agency of the United States. (d) The term System Open Market...

  17. 12 CFR 609.925 - Definitions.

    Science.gov (United States)

    2010-01-01

    ... systems. (c) Electronic business (E-business) or electronic commerce (E-commerce) means buying, selling, producing, or working in an electronic medium. (d) Electronic mail (E-mail) means: (1) To send or submit... Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM ELECTRONIC COMMERCE Interpretations and Definitions...

  18. 5 CFR 9901.504 - Definitions.

    Science.gov (United States)

    2010-01-01

    ... Administrative Personnel DEPARTMENT OF DEFENSE HUMAN RESOURCES MANAGEMENT AND LABOR RELATIONS SYSTEMS (DEPARTMENT OF DEFENSE-OFFICE OF PERSONNEL MANAGEMENT) DEPARTMENT OF DEFENSE NATIONAL SECURITY PERSONNEL SYSTEM (NSPS) Staffing and Employment General § 9901.504 Definitions. In this subpart— Career conditional...

  19. 48 CFR 470.101 - Definitions.

    Science.gov (United States)

    2010-10-01

    .... 55314(c), with respect to an agricultural product acquired under this part the lowest aggregate cost for... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Definitions. 470.101 Section 470.101 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE FOOD ASSISTANCE PROGRAMS...

  20. 12 CFR 615.5045 - Definitions.

    Science.gov (United States)

    2010-01-01

    ... and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM FUNDING AND FISCAL AFFAIRS, LOAN POLICIES AND OPERATIONS, AND FUNDING OPERATIONS Collateral § 615.5045 Definitions. (a) Cost means the actual... accrued interest owed. (d) Secured interbank loan means a loan from one Farm Credit System bank to another...

  1. 48 CFR 3.1001 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Definitions. 3.1001 Section 3.1001 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL IMPROPER BUSINESS PRACTICES AND PERSONAL CONFLICTS OF INTEREST Contractor Code of Business Ethics and Conduct 3.1001...

  2. 40 CFR 205.165 - Definitions.

    Science.gov (United States)

    2010-07-01

    ... respect to the parameters listed in § 205.168 of this subpart. (2) Exhaust header pipe means any tube of... be “exhaust header pipes.” (3) Failing exhaust system means that, when installed on any Federally... EQUIPMENT NOISE EMISSION CONTROLS Motorcycle Exhaust Systems § 205.165 Definitions. (a) As used in this...

  3. 48 CFR 22.801 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Definitions. 22.801 Section 22.801 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SOCIOECONOMIC PROGRAMS APPLICATION OF LABOR LAWS TO GOVERNMENT ACQUISITIONS Equal Employment Opportunity 22.801...

  4. Hidden Curriculum: An Analytical Definition

    Directory of Open Access Journals (Sweden)

    Mohammad Reza Andarvazh

    2018-03-01

    Full Text Available Background: The concept of hidden curriculum was first used by Philip Jackson in 1968, and Hafferty brought this concept to the medical education. Many of the subjects that medical students learn are attributed to this curriculum. So far several definitions have been presented for the hidden curriculum, which on the one hand made this concept richer, and on the other hand, led to confusion and ambiguity.This paper tries to provide a clear and comprehensive definition of it.Methods: In this study, concept analysis of McKenna method was used. Using keywords and searching in the databases, 561 English and 26 Persian references related to the concept was found, then by limitingthe research scope, 125 abstracts and by finding more relevant references, 55 articles were fully studied.Results: After analyzing the definitions by McKenna method, the hidden curriculum is defined as follows: The hidden curriculum is a hidden, powerful, intrinsic in organizational structure and culture and sometimes contradictory message, conveyed implicitly and tacitly in the learning environment by structural and human factors and its contents includes cultural habits and customs, norms, values, belief systems, attitudes, skills, desires and behavioral and social expectations can have a positive or negative effect, unplanned, neither planners nor teachers, nor learners are aware of it. The ultimate consequence of the hidden curriculum includes reproducing the existing class structure, socialization, and familiarizing learners for transmission and joining the professional world.Conclusion: Based on the concept analysis, we arrived at an analytical definition of the hidden curriculum that could be useful for further studies in this area.Keywords: CONCEPT ANALYSIS, HIDDEN CURRICULUM, MCKENNA’S METHOD

  5. Exploring Mathematical Definition Construction Processes

    Science.gov (United States)

    Ouvrier-Buffet, Cecile

    2006-01-01

    The definition of "definition" cannot be taken for granted. The problem has been treated from various angles in different journals. Among other questions raised on the subject we find: the notions of "concept definition" and "concept image", conceptions of mathematical definitions, redefinitions, and from a more axiomatic point of view, how to…

  6. A systematic literature review of US definitions, scoring systems and validity according to the OMERACT filter for tendon lesion in RA and other inflammatory joint diseases.

    Science.gov (United States)

    Alcalde, María; D'Agostino, Maria Antonietta; Bruyn, George A W; Möller, Ingrid; Iagnocco, Annamaria; Wakefield, Richard J; Naredo, Esperanza

    2012-07-01

    To present the published data concerning the US assessment of tendon lesions as well as the US metric properties investigated in inflammatory arthritis. A systematic literature search of PubMed, Embase and the Cochrane Library was performed. Selection criteria were original articles in the English language reporting US, Doppler, tenosynovitis and other tendon lesions in patients with RA and other inflammatory arthritis. Data extraction focused on the definition and quantification of US-detected tenosynovitis and other tendon abnormalities and the metric properties of US according to the OMERACT filter for evaluating the above tendon lesions. Thirty-three of 192 identified articles were included in the review. Most articles were case series (42%) or case-control (33%) studies describing hand and/or foot tenosynovitis in RA patients. The majority of older articles used only B-mode, whereas the most recent studies have incorporated Doppler mode. Definition of tenosynovitis or other tendon lesion was provided in 70% of the evaluated studies. Most of the studies (61%) used a binary score for evaluating tendon abnormalities. Concerning the OMERACT filter, 24 (73%) articles dealt with construct validity. The comparator most commonly used was clinical assessment and MRI. There were few studies assessing criterion validity. Some studies evaluated reliability (36%), responsiveness (21%) and feasibility (12%). US seems a promising tool for evaluating inflammatory tendon lesions. However, further validation is necessary for implementation in clinical practice and trials.

  7. The Definitive Guide to SQLite

    CERN Document Server

    Owens, Mike

    2010-01-01

    Outside of the world of enterprise computing there is one database that enables a huge range of software and hardware to flex relational database capabilities, without the baggage and cost of traditional database management systems. That database is SQLite - an embeddable database with an amazingly small footprint, yet it can handle databases of enormous size. SQLite comes equipped with an array of powerful features available through a host of programming and development environments. It is supported by languages such as C, Java, Perl, PHP, Python, Ruby, TCL, and more. The Definitive Guide to

  8. TFOS DEWS II Definition and Classification Report.

    Science.gov (United States)

    Craig, Jennifer P; Nichols, Kelly K; Akpek, Esen K; Caffery, Barbara; Dua, Harminder S; Joo, Choun-Ki; Liu, Zuguo; Nelson, J Daniel; Nichols, Jason J; Tsubota, Kazuo; Stapleton, Fiona

    2017-07-01

    The goals of the TFOS DEWS II Definition and Classification Subcommittee were to create an evidence-based definition and a contemporary classification system for dry eye disease (DED). The new definition recognizes the multifactorial nature of dry eye as a disease where loss of homeostasis of the tear film is the central pathophysiological concept. Ocular symptoms, as a broader term that encompasses reports of discomfort or visual disturbance, feature in the definition and the key etiologies of tear film instability, hyperosmolarity, and ocular surface inflammation and damage were determined to be important for inclusion in the definition. In the light of new data, neurosensory abnormalities were also included in the definition for the first time. In the classification of DED, recent evidence supports a scheme based on the pathophysiology where aqueous deficient and evaporative dry eye exist as a continuum, such that elements of each are considered in diagnosis and management. Central to the scheme is a positive diagnosis of DED with signs and symptoms, and this is directed towards management to restore homeostasis. The scheme also allows consideration of various related manifestations, such as non-obvious disease involving ocular surface signs without related symptoms, including neurotrophic conditions where dysfunctional sensation exists, and cases where symptoms exist without demonstrable ocular surface signs, including neuropathic pain. This approach is not intended to override clinical assessment and judgment but should prove helpful in guiding clinical management and research. Copyright © 2017 Elsevier Inc. All rights reserved.

  9. Definitions of mass in special relativity

    International Nuclear Information System (INIS)

    Whitaker, M.A.B.

    1976-01-01

    Reference is made to the textbook on special relativity by Taylor and Wheeler (Space-time Physics. San Francisco. W H Freeman) in which the concept of relativistic mass is not used but momentum and energy are defined as γm 0 ν and γm 0 c 2 . The two approaches are compared and the particular problem of inelastic collisions between two particles with zero coefficient of restitution is used to demonstrate that the Taylor Wheeler definition of the rest mass of a system may lead to lack of clarity of thought, and even error. Alternative definitions of the rest mass of a system are proposed. (U.K.)

  10. Acute respiratory distress syndrome: the Berlin Definition.

    Science.gov (United States)

    Ranieri, V Marco; Rubenfeld, Gordon D; Thompson, B Taylor; Ferguson, Niall D; Caldwell, Ellen; Fan, Eddy; Camporota, Luigi; Slutsky, Arthur S

    2012-06-20

    The acute respiratory distress syndrome (ARDS) was defined in 1994 by the American-European Consensus Conference (AECC); since then, issues regarding the reliability and validity of this definition have emerged. Using a consensus process, a panel of experts convened in 2011 (an initiative of the European Society of Intensive Care Medicine endorsed by the American Thoracic Society and the Society of Critical Care Medicine) developed the Berlin Definition, focusing on feasibility, reliability, validity, and objective evaluation of its performance. A draft definition proposed 3 mutually exclusive categories of ARDS based on degree of hypoxemia: mild (200 mm Hg < PaO2/FIO2 ≤ 300 mm Hg), moderate (100 mm Hg < PaO2/FIO2 ≤ 200 mm Hg), and severe (PaO2/FIO2 ≤ 100 mm Hg) and 4 ancillary variables for severe ARDS: radiographic severity, respiratory system compliance (≤40 mL/cm H2O), positive end-expiratory pressure (≥10 cm H2O), and corrected expired volume per minute (≥10 L/min). The draft Berlin Definition was empirically evaluated using patient-level meta-analysis of 4188 patients with ARDS from 4 multicenter clinical data sets and 269 patients with ARDS from 3 single-center data sets containing physiologic information. The 4 ancillary variables did not contribute to the predictive validity of severe ARDS for mortality and were removed from the definition. Using the Berlin Definition, stages of mild, moderate, and severe ARDS were associated with increased mortality (27%; 95% CI, 24%-30%; 32%; 95% CI, 29%-34%; and 45%; 95% CI, 42%-48%, respectively; P < .001) and increased median duration of mechanical ventilation in survivors (5 days; interquartile [IQR], 2-11; 7 days; IQR, 4-14; and 9 days; IQR, 5-17, respectively; P < .001). Compared with the AECC definition, the final Berlin Definition had better predictive validity for mortality, with an area under the receiver operating curve of 0.577 (95% CI, 0.561-0.593) vs 0.536 (95% CI, 0.520-0.553; P

  11. High-Definition Medicine.

    Science.gov (United States)

    Torkamani, Ali; Andersen, Kristian G; Steinhubl, Steven R; Topol, Eric J

    2017-08-24

    The foundation for a new era of data-driven medicine has been set by recent technological advances that enable the assessment and management of human health at an unprecedented level of resolution-what we refer to as high-definition medicine. Our ability to assess human health in high definition is enabled, in part, by advances in DNA sequencing, physiological and environmental monitoring, advanced imaging, and behavioral tracking. Our ability to understand and act upon these observations at equally high precision is driven by advances in genome editing, cellular reprogramming, tissue engineering, and information technologies, especially artificial intelligence. In this review, we will examine the core disciplines that enable high-definition medicine and project how these technologies will alter the future of medicine. Copyright © 2017 Elsevier Inc. All rights reserved.

  12. ITER definition phase

    International Nuclear Information System (INIS)

    1989-01-01

    The International Thermonuclear Experimental Reactor (ITER) is envisioned as a fusion device which would demonstrate the scientific and technological feasibility of fusion power. As a first step towards achieving this goal, the European Community, Japan, the Soviet Union, and the United States of America have entered into joint conceptual design activities under the auspices of the International Atomic Energy Agency. A brief summary of the Definition Phase of ITER activities is contained in this report. Included in this report are the background, objectives, organization, definition phase activities, and research and development plan of this endeavor in international scientific collaboration. A more extended technical summary is contained in the two-volume report, ''ITER Concept Definition,'' IAEA/ITER/DS/3. 2 figs, 2 tabs

  13. Comparison of the Sensitivity to Change of the 36-Item Short Form Health Survey and the Lupus Quality of Life Measure Using Various Definitions of Minimum Clinically Important Differences in Patients With Active Systemic Lupus Erythematosus.

    Science.gov (United States)

    Nantes, Stephanie G; Strand, Vibeke; Su, Jiandong; Touma, Zahi

    2018-01-01

    The Medical Outcomes Study Short Form 36 (SF-36) and Lupus Quality of Life (LupusQoL) are health-related quality of life questionnaires used in systemic lupus erythematosus (SLE). We first determined the hypothesis-testing construct validity of the SF-36 and LupusQoL against disease activity in patients with active SLE and then compared the sensitivity to change of SF-36 and LupusQoL domains according to different definitions of minimum clinically important differences (MCIDs) for improvement and worsening in the current cohort. Seventy-eight clinically active SLE patients concurrently completed both questionnaires at their baseline and followup visits. Questionnaire domain scores were correlated with the SLE Disease Activity Index 2000 (SLEDAI-2K) and evaluated for floor/ceiling effects. The sensitivity to change of domains in each questionnaire was analyzed first, according to the various MCID definitions and, second, by clinically meaningful changes in disease activity. The magnitudes of change in each domain score between the baseline and followup visit were evaluated using standardized response means. In the 78 patients, the mean ± SD SLEDAI-2K scores were 9.7 ± 4.8 at baseline and 8.8 ± 5.1 at followup. SF-36/LupusQoL domain scores did not correlate with disease activity. The SF-36 showed floor effects, and ceiling effects were evident in both questionnaires. All domains of both questionnaires showed sensitivity to change over time. Specific domains that reflected worsening or improvement differed according to differing MCID definitions. In SLE patients with active disease, both the SF-36 and LupusQoL are sensitive to change, reflecting both improvement and worsening. More importantly, the LupusQoL SLE-specific domains (planning, burden to others, body image, and intimate relationships) were largely responsive to change. © 2017, American College of Rheumatology.

  14. Prebiotics: why definitions matter

    Science.gov (United States)

    Hutkins, Robert W; Krumbeck, Janina A; Bindels, Laure B; Cani, Patrice D; Fahey, George; Goh, Yong Jun; Hamaker, Bruce; Martens, Eric C; Mills, David A; Rastal, Robert A; Vaughan, Elaine; Sanders, Mary Ellen

    2015-01-01

    The prebiotic concept was introduced twenty years ago, and despite several revisions to the original definition, the scientific community has continued to debate what it means to be a prebiotic. How prebiotics are defined is important not only for the scientific community, but also for regulatory agencies, the food industry, consumers and healthcare professionals. Recent developments in community-wide sequencing and glycomics have revealed that more complex interactions occur between putative prebiotic substrates and the gut microbiota than previously considered. A consensus among scientists on the most appropriate definition of a prebiotic is necessary to enable continued use of the term. PMID:26431716

  15. Dengue disease outbreak definitions are implicitly variable

    Directory of Open Access Journals (Sweden)

    Oliver J. Brady

    2015-06-01

    Full Text Available Infectious diseases rarely exhibit simple dynamics. Outbreaks (defined as excess cases beyond response capabilities have the potential to cause a disproportionately high burden due to overwhelming health care systems. The recommendations of international policy guidelines and research agendas are based on a perceived standardised definition of an outbreak characterised by a prolonged, high-caseload, extra-seasonal surge. In this analysis we apply multiple candidate outbreak definitions to reported dengue case data from Brazil to test this assumption. The methods identify highly heterogeneous outbreak characteristics in terms of frequency, duration and case burden. All definitions identify outbreaks with characteristics that vary over time and space. Further, definitions differ in their timeliness of outbreak onset, and thus may be more or less suitable for early intervention. This raises concerns about the application of current outbreak guidelines for early warning/identification systems. It is clear that quantitatively defining the characteristics of an outbreak is an essential prerequisite for effective reactive response. More work is needed so that definitions of disease outbreaks can take into account the baseline capacities of treatment, surveillance and control. This is essential if outbreak guidelines are to be effective and generalisable across a range of epidemiologically different settings.

  16. Integrated Application of Active Controls (IAAC) technology to an advanced subsonic transport project: Current and advanced act control system definition study. Volume 2: Appendices

    Science.gov (United States)

    Hanks, G. W.; Shomber, H. A.; Dethman, H. A.; Gratzer, L. B.; Maeshiro, A.; Gangsaas, D.; Blight, J. D.; Buchan, S. M.; Crumb, C. B.; Dorwart, R. J.

    1981-01-01

    The current status of the Active Controls Technology (ACT) for the advanced subsonic transport project is investigated through analysis of the systems technical data. Control systems technologies under examination include computerized reliability analysis, pitch axis fly by wire actuator, flaperon actuation system design trade study, control law synthesis and analysis, flutter mode control and gust load alleviation analysis, and implementation of alternative ACT systems. Extensive analysis of the computer techniques involved in each system is included.

  17. Role of tracer methods in hydrology as a source of physical information. Basic concepts and definitions. Time relationship in dynamic systems

    International Nuclear Information System (INIS)

    Nir, A.

    1986-01-01

    The paper provides a general review on the systems theory approach for the tracer methodology, indicating also the relations of the system theory to other available approaches such as deterministic mechanism description and stochastic approaches. Methodology and formulations of systems approach as applied to tracer use in steady-state cases are discussed. Extension of the systems approach for tracer use in non-steady-state cases and input-output relationships for time varying systems are also given. (author)

  18. Partial Remission Definition

    DEFF Research Database (Denmark)

    Andersen, Marie Louise Max; Hougaard, Philip; Pörksen, Sven

    2014-01-01

    OBJECTIVE: To validate the partial remission (PR) definition based on insulin dose-adjusted HbA1c (IDAA1c). SUBJECTS AND METHODS: The IDAA1c was developed using data in 251 children from the European Hvidoere cohort. For validation, 129 children from a Danish cohort were followed from the onset...

  19. COPD: Definition and Phenotypes

    DEFF Research Database (Denmark)

    Vestbo, J.

    2014-01-01

    particles or gases. Exacerbations and comorbidities contribute to the overall severity in individual patients. The evolution of this definition and the diagnostic criteria currently in use are discussed. COPD is increasingly divided in subgroups or phenotypes based on specific features and association...

  20. Center of buoyancy definition

    International Nuclear Information System (INIS)

    Sandberg, V.

    1988-12-01

    The center of buoyancy of an arbitrary shaped body is defined in analogy to the center of gravity. The definitions of the buoyant force and center of buoyancy in terms of integrals over the area of the body are converted to volume integrals and shown to have simple intuitive interpretations

  1. The definition of sarcopenia

    NARCIS (Netherlands)

    Bijlsma, Astrid Y.

    2013-01-01

    Sarcopenia in old age has been associated with a higher mortality, poor physical functioning, poor outcome of surgery and higher drug toxicity. There is no general consensus on the definition of sarcopenia. The aim of the research presented in this thesis was to assess the implications of the use of

  2. Subjective poverty line definitions

    NARCIS (Netherlands)

    J. Flik; B.M.S. van Praag (Bernard)

    1991-01-01

    textabstractIn this paper we will deal with definitions of subjective poverty lines. To measure a poverty threshold value in terms of household income, which separates the poor from the non-poor, we take into account the opinions of all people in society. Three subjective methods will be discussed

  3. Definition of Professional Development

    Science.gov (United States)

    Learning Forward, 2015

    2015-01-01

    President Obama signed into law the Every Student Succeeds Act, the reauthorization of the Elementary and Secondary Education Act, on December 10, 2015. "Learning Forward's focus in this new law is its improved definition of professional learning," said Stephanie Hirsh, executive director of Learning Forward. "We've long advocated…

  4. Definition of Entity Authentication

    DEFF Research Database (Denmark)

    Ahmed, Naveed; Jensen, Christian D.

    2010-01-01

    Authentication is considered a pre-requisite for communication security, but the definition of authentication is generally not agreed upon. Many attacks on authentication protocols are the result of misunderstanding of the goals of authentication. This state of affairs indicate limitations in the...

  5. 46 CFR 111.105-1 - Applicability; definition.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Applicability; definition. 111.105-1 Section 111.105-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING ELECTRIC SYSTEMS-GENERAL REQUIREMENTS Hazardous Locations § 111.105-1 Applicability; definition. This subpart applies to...

  6. 12 CFR 269.1 - Definition of a labor organization.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 3 2010-01-01 2010-01-01 false Definition of a labor organization. 269.1... RESERVE SYSTEM POLICY ON LABOR RELATIONS FOR THE FEDERAL RESERVE BANKS § 269.1 Definition of a labor... to the terms or conditions of membership because of race, color, sex, creed, age or national origin. ...

  7. A note on the mixture viscosity using the Shannak definition

    International Nuclear Information System (INIS)

    Awad, M.M.

    2014-01-01

    Highlights: • A note on the mixture viscosity using the Shannak definition is presented. • The Shannak definition gives μ (2ph) > μ f at low x. • Attention must be taken when using the Shannak definition at low x. - Abstract: In this study, a note on the mixture viscosity using the Shannak definition is presented [Shannak, B. A., 2008. Frictional pressure drop of gas liquid two-phase flow in pipes. Nucl. Eng. Des. 238, 3277–3284]. From his definition of the two-phase Reynolds number (Re (2ph) ), an expression of the two-phase viscosity (μ (2ph) ) is obtained. This expression of the two-phase viscosity (μ (2ph) ) satisfies the following important limiting conditions: i. at x = 0, μ (2ph) = μ f , and at x = 1, μ (2ph) = μ g . This definition of the two-phase viscosity (μ (2ph) ) can be used to compute the two-phase frictional pressure gradient using the homogeneous modeling approach in circular pipes, minichannels and microchannels. By plotting μ (2ph) /μ f versus x for air–water system at atmospheric conditions using the Shannak definition as well as the other most commonly used formulas of the two-phase viscosity (μ (2ph) ) in gas–liquid two-phase flows such as McAdams et al. (1942), Cicchitti et al. (1960), and Awad and Muzychka (2008) (Definition 1, Definition 2, Definition 3, and Definition 4), it is clear that the Shannak definition of the two-phase viscosity gives μ (2ph) > μ f at low x. This is impossible because we must have μ g (2ph) f for 0 < x < 1. Therefore, attention must be taken when using the Shannak definition of the two-phase viscosity at low x

  8. 12 CFR 618.8000 - Definitions.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Definitions. 618.8000 Section 618.8000 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM GENERAL PROVISIONS Related Services § 618... means the method or procedures used to deliver a related service. This distinguishes the particulars of...

  9. 47 CFR 213.4 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... Telecommunication OFFICE OF SCIENCE AND TECHNOLOGY POLICY AND NATIONAL SECURITY COUNCIL GOVERNMENT AND PUBLIC CORRESPONDENCE TELECOMMUNICATIONS PRECEDENCE SYSTEM § 213.4 Definitions. As used herein: (a) Public... which messages and calls are processed. Transmission of information and call completion is therefore to...

  10. 5 CFR 430.402 - Definitions.

    Science.gov (United States)

    2010-01-01

    ... Performance Appraisal Certification for Pay Purposes § 430.402 Definitions. In this subpart— Appraisal system... senior employees against their performance expectations and may take into account their contribution to agency performance, where appropriate. Performance expectations means critical and other performance...

  11. 5 CFR 9701.304 - Definitions.

    Science.gov (United States)

    2010-01-01

    ... performance expectations (as defined in § 9701.404) over the applicable period; or (2) To support a pay... MANAGEMENT SYSTEM Pay and Pay Administration General § 9701.304 Definitions. In this part: 48 contiguous... Columbia. Band means a work level or pay range within an occupational cluster. Band rate range means the...

  12. 14 CFR 1215.102 - Definitions.

    Science.gov (United States)

    2010-01-01

    ... (TDRSS) Use and Reimbursement Policy for Non-U.S. Government Users § 1215.102 Definitions. (a) User. Any non-U.S. Government representative or entity who contracts with NASA to use TDRSS services. (b) TDRSS... user ground system/TDRSS interface. (c) Bit stream. The digital electronic signals acquired by TDRSS...

  13. 16 CFR 1012.2 - Definitions.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Definitions. 1012.2 Section 1012.2 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL MEETINGS POLICY-MEETINGS BETWEEN AGENCY... and other personnel involved in the National Electronic Injury Surveillance System. ...

  14. 5 CFR 351.203 - Definitions.

    Science.gov (United States)

    2010-01-01

    ... for a position covered by a wage-board or similar wage-determining procedure, such as provided in the definition of representative rate for Federal Wage System positions in 5 CFR 532.401 of this chapter; (3) For... low priority program or to a vacant position. [51 FR 319, Jan. 3, 1986, as amended at 58 FR 65533, Dec...

  15. 18 CFR 301.2 - Definitions.

    Science.gov (United States)

    2010-04-01

    ... SALES FROM UTILITIES TO BONNEVILLE POWER ADMINISTRATION UNDER NORTHWEST POWER ACT § 301.2 Definitions... Period ASC. Average System Cost review process (ASC review process). The administrative proceeding conducted before Bonneville under Bonneville's ASC review procedures in which a Utility's ASC is determined...

  16. 43 CFR 426.2 - Definitions.

    Science.gov (United States)

    2010-10-01

    ..., Kansas, Montana, Nebraska, Nevada, New Mexico, North Dakota, Oklahoma, Oregon, South Dakota, Texas, Utah..., Sections 203(b), 204, and 205 of the Reclamation Reform Act of 1982 (43 U.S.C. 390aa et seq.). Acreage... definition includes contracts made in accordance with the Distribution System Loans Act, as amended (43 U.S.C...

  17. 40 CFR 143.2 - Definitions.

    Science.gov (United States)

    2010-07-01

    ... public of piped water for human consumption, if such a system has at least fifteen service connections or... corrosion of piping and plumbing caused by water quality, are excluded from this definition. [44 FR 42198... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL...

  18. 49 CFR 234.5 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... TRANSPORTATION GRADE CROSSING SIGNAL SYSTEM SAFETY AND STATE ACTION PLANS General § 234.5 Definitions. As used in... meaning of this paragraph if—more than 50% of the flashing lights (not gate arm lights) on any approach.... For nighttime flagging, similar outside garments shall be retro reflective. Acceptable hand signal...

  19. 10 CFR 431.12 - Definitions.

    Science.gov (United States)

    2010-01-01

    ... by a testing laboratory, as well as rules of procedure and management, that are used to accredit... a system, that has its own rules of procedure and management, for giving written assurance that a... the product, process or service. CSA means CSA International. Definite purpose motor means any motor...

  20. 36 CFR 13.420 - Definitions.

    Science.gov (United States)

    2010-07-01

    ... PARK SYSTEM UNITS IN ALASKA Subsistence § 13.420 Definitions. Local rural resident. As used in this... wildlife resources taken for personal or family consumption; for barter or sharing for personal or family... permanent basis; and (2) “Barter” shall mean the exchange of fish or wildlife or their parts taken for...

  1. 40 CFR 63.441 - Definitions.

    Science.gov (United States)

    2010-07-01

    ... Hazardous Air Pollutants from the Pulp and Paper Industry § 63.441 Definitions. All terms used in this... dioxide gas fortification process. Black liquor means spent cooking liquor that has been separated from... content and/or concentrating spent cooking liquor from the pulp washing system including pre-evaporators...

  2. 7 CFR 37.1 - Definitions.

    Science.gov (United States)

    2010-01-01

    ... accordance with the regulations that may result in assessment of an organic certification program that... certifying agency's quality system and associated quality certification procedures used to certify organic... ASSESS ORGANIC CERTIFYING AGENCIES § 37.1 Definitions. Words used in this part in the singular form shall...

  3. 40 CFR 87.1 - Definitions.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Definitions. 87.1 Section 87.1 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF AIR... commercial aircraft engine. Emission measurement system means all of the equipment necessary to transport and...

  4. 12 CFR 652.50 - Definitions.

    Science.gov (United States)

    2010-01-01

    ... Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM FEDERAL AGRICULTURAL MORTGAGE CORPORATION FUNDING AND FISCAL AFFAIRS Risk-Based Capital Requirements § 652.50 Definitions. For purposes of this subpart... the Farm Credit Administration. Regulatory capital means the sum of the following as determined in...

  5. 5 CFR 841.702 - Definitions.

    Science.gov (United States)

    2010-01-01

    ... EMPLOYEES RETIREMENT SYSTEM-GENERAL ADMINISTRATION Cost-of-Living Adjustments § 841.702 Definitions. In this...) to a person designated to receive such an annuity under § 842.605 of this chapter. COLA means a cost-of-living adjustment. Combined CSRS/FERS annuity means the recurring benefit with a CSRS component...

  6. 12 CFR 614.4512 - Definitions.

    Science.gov (United States)

    2010-01-01

    ... and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM LOAN POLICIES AND OPERATIONS Loan Servicing Requirements; State Agricultural Loan Mediation Programs; Right of First Refusal § 614.4512 Definitions. For... financial assistance under section 6.4 of the Act. (c) Cost of foreclosure means: (1) The difference between...

  7. 25 CFR 900.113 - Definitions.

    Science.gov (United States)

    2010-04-01

    ... Definitions. (a) Construction contract means a fixed-price or cost-reimbursement self-determination contract... and detention facilities, sanitation and water systems, roads, schools, administration and health facilities, irrigation and agricultural work, water conservation, flood control, and port facilities, and...

  8. 41 CFR 109-38.001 - Definitions.

    Science.gov (United States)

    2010-07-01

    ... Classification Group (FSCG) 38; material handling equipment set forth in FSCG 39; and fire fighting equipment set... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Definitions. 109-38.001 Section 109-38.001 Public Contracts and Property Management Federal Property Management Regulations System...

  9. 5 CFR 9901.304 - Definitions.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Definitions. 9901.304 Section 9901.304 Administrative Personnel DEPARTMENT OF DEFENSE HUMAN RESOURCES MANAGEMENT AND LABOR RELATIONS SYSTEMS (DEPARTMENT... supplement established to address recruitment or retention difficulties or for other appropriate reasons and...

  10. 48 CFR 1509.170-4 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... Section 1509.170-4 Federal Acquisition Regulations System ENVIRONMENTAL PROTECTION AGENCY ACQUISITION PLANNING CONTRACTOR QUALIFICATIONS Contractor Performance Evaluations 1509.170-4 Definitions. (a) Contractor Performance Report is an evaluation of a contractor's performance for a specified period of time...

  11. 9 CFR 417.1 - Definitions.

    Science.gov (United States)

    2010-01-01

    ... CRITICAL CONTROL POINT (HACCP) SYSTEMS § 417.1 Definitions. For purposes of this part, the following... control point. A point, step, or procedure in a food process at which control can be applied and, as a... limit. The maximum or minimum value to which a physical, biological, or chemical hazard must be...

  12. 5 CFR 1215.2 - Definitions.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Definitions. 1215.2 Section 1215.2 Administrative Personnel MERIT SYSTEMS PROTECTION BOARD ORGANIZATION AND PROCEDURES DEBT MANAGEMENT Salary Offset... the debt and authorizes the payment of his/her current pay. (h) Salary offset. An administrative...

  13. 48 CFR 27.301 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Patent Rights under Government Contracts 27.301 Definitions. As used... taxation under section 501(a) of the Internal Revenue Code (26 U.S.C. 501(a)), or any nonprofit scientific... process or method; or to operate, in the case of a machine or system; and, in each case, under such...

  14. 12 CFR 1410.2 - Definitions.

    Science.gov (United States)

    2010-01-01

    ... particular loan constitutes an independent credit risk and such determination is adequately documented in the... Banking FARM CREDIT SYSTEM INSURANCE CORPORATION PREMIUMS § 1410.2 Definitions. (a) Act means the Farm Credit Act of 1971, as amended. (b) Average principal outstanding means the average annual principal...

  15. 44 CFR 206.221 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... buildings, structures, equipment, or systems used to provide emergency services, such as fire protection... Definitions. (a) Educational institution means: (1) Any elementary school as defined by section 801(c) of the Elementary and Secondary Education Act of 1965; or (2) Any secondary school as defined by section 801(h) of...

  16. 30 CFR 75.201 - Definitions.

    Science.gov (United States)

    2010-07-01

    ... SAFETY STANDARDS-UNDERGROUND COAL MINES Roof Support § 75.201 Definitions. Automated temporary roof support (ATRS) system. A device to provide temporary roof support from a location where the equipment operator is protected from roof falls. Pillar recovery. Any reduction in pillar size during retreat mining. ...

  17. Definitions of Health Terms: Minerals

    Science.gov (United States)

    ... gov/definitions/mineralsdefinitions.html Definitions of Health Terms : Minerals To use the sharing features on this page, ... National Institutes of Health, Office of Dietary Supplements Minerals Minerals are those elements on the earth and ...

  18. A case study of the sensitivity of forecast skill to data and data analysis techniques

    Science.gov (United States)

    Baker, W. E.; Atlas, R.; Halem, M.; Susskind, J.

    1983-01-01

    A series of experiments have been conducted to examine the sensitivity of forecast skill to various data and data analysis techniques for the 0000 GMT case of January 21, 1979. These include the individual components of the FGGE observing system, the temperatures obtained with different satellite retrieval methods, and the method of vertical interpolation between the mandatory pressure analysis levels and the model sigma levels. It is found that NESS TIROS-N infrared retrievals seriously degrade a rawinsonde-only analysis over land, resulting in a poorer forecast over North America. Less degradation in the 72-hr forecast skill at sea level and some improvement at 500 mb is noted, relative to the control with TIROS-N retrievals produced with a physical inversion method which utilizes a 6-hr forecast first guess. NESS VTPR oceanic retrievals lead to an improved forecast over North America when added to the control.

  19. Nuclear technology terms and definitions

    International Nuclear Information System (INIS)

    1979-02-01

    The terms and definitions in this standard are part of the catalogue of definitions 'Nuclear technology, terms and definitions', in eight parts; they are the latest version of the standards and draft standards of DIN 25 401, part 10 to 19, published at irregular intervals until now. (orig.) [de

  20. Distribution definition of path integrals

    International Nuclear Information System (INIS)

    Kerler, W.

    1979-01-01

    By starting from quantum mechanics it turns out that a rather general definition of quantum functional integrals can be given which is based on distribution theory. It applies also to curved space and provides clear rules for non-linear transformations. The refinements necessary in usual definitions of path integrals are pointed out. Since the quantum nature requires special care with time sequences, it is not the classical phase space which occurs in the phase-space form of the path integral. Feynman's configuration-space form only applies to a highly specialized situation, and therefore is not a very advantageous starting point for general investigations. It is shown that the commonly used substitutions of variables do not properly account for quantum effects. The relation to the traditional ordering problem is clarified. The distribution formulation has allowed to treat constrained systems directly at the quantum level, to complete the path integral formulation of the equivalence theorem, and to define functional integrals also for space translation after the transition to fields. (orig.)

  1. Definition of criteria and characteristics for the deterministic evaluation of re-design component suitability for the use in reactor instrumentation and control systems of nuclear power plants

    International Nuclear Information System (INIS)

    Arians, Robert; Arnold, Simone; Lindner, Falk; Mbonjo, Herve; Quester, Claudia; Sommer, Dagmar

    2015-03-01

    Diversity is one of the key concepts in the challenge to improve the robustness of digi-tal instrumentation and control (I and C) systems important to safety against common cause failures. In the cause of this project, a diversity matrix was established that can be used as a basis in the assessment of the diversity of digital I and C systems or their components. The matrix comprises diversity criteria which are structured according to the life cycle of I and C systems and their components, and shows their applicability to the technical components and additional items of a generic digital I and C system.

  2. Controversy around the definition of waste

    CSIR Research Space (South Africa)

    Oelofse, Suzanna HH

    2009-11-20

    Full Text Available This paper presents the information concerning the definition of waste. Discussing the importance of the clear definition, ongoing debates, broad definition of waste, problems with the broad definition, interpretation, current waste management model...

  3. Toward a Definition of the Engineering Method.

    Science.gov (United States)

    Koen, Billy V.

    1988-01-01

    Describes a preliminary definition of engineering method as well as a definition and examples of engineering heuristics. After discussing some alternative definitions of the engineering method, a simplified definition of the engineering method is suggested. (YP)

  4. NUKEM adjusts price definitions

    International Nuclear Information System (INIS)

    Anon.

    1994-01-01

    This article is the October-November 1994 market report, providing trading volume and prices in the Uranium market. During this period, there were five deals in the spot concentrates market, five deals in the medium and long-term market, one deal in the conversion market, and two deals in the enrichment market. Restricted prices strengthened while unrestricted prices held steady. Price re-definitions were also announced

  5. XMPP The Definitive Guide

    CERN Document Server

    Saint-Andre, Peter; Smith, Kevin

    2009-01-01

    This practical book provides everything you need to know about the Extensible Messaging and Presence Protocol (XMPP) -- the open technology for real-time communication used in instant messaging, Voice over IP, real-time collaboration, social networking, microblogging, lightweight middleware, cloud computing, and more. XMPP: The Definitive Guide walks you through the thought processes and design decisions involved in building a complete XMPP-enabled application, and adding real-time interfaces to existing applications.

  6. The Logic of Definition

    Science.gov (United States)

    2009-05-01

    Wittgenstein , in his Philosophical Investigations (1953), observed that, for many phenomena, there are no necessary conditions common to all members of... Wittgenstein 1953: §66, p.27e). Wittgenstein refers to these overlapping similarities as “family resemblances” (Ibid., §67, p.27e). Few, if any, of...that is, we may resort to stipulative definition). But this is not necessary for the concept to be usable. Indeed, as Wittgenstein says, sometimes

  7. Definition of containment issues

    International Nuclear Information System (INIS)

    Walker, D.H.

    1982-01-01

    Public Law 96-567 Nuclear Safety Research, Development and Demonstration Act of 1980, directed the US Department of Energy (DOE) to provide an accelerated and coordinated program for developing practical generic improvements that would enhance the capability for safe, reliable and economical operation of Light Water Nuclear Reactor Power Stations. The DOE approach to defining such a program will consist of two phases, (1) definition of program requirements and (2) implementation of the program plan. This paper summarizes the results of the program definition phase for the containment integrity function. The definition phase effort was carried out by two groups of knowledgeable technical experts from the nuclear industry, one of which addressed containment integrity. Tabulated in the paper are the issues identified by the working groups and their associated priorities. Also tabulated are those high priority issues for which ongoing programs do not appear to provide sufficient information to resolve the issue. The results of this review show that existing programs to a great extent address existing issues in a manner such that the issues should be resolved by the programs

  8. Comparing Two Definitions of Work for a Biological Quantum Heat Engine

    International Nuclear Information System (INIS)

    Xu You-Yang; Zhao Shun-Cai; Liu Juan

    2015-01-01

    Systems of photosynthetic reaction centres have been modelled as heat engines, while it has also been reported that the efficiency and power of such heat engines can be enhanced by quantum interference — a trait that has attracted much interest. We compare two definitions of the work of such a photosynthetic heat engine, i.e. definition A used by Weimer et al. and B by Dorfman et al. We also introduce a coherent interaction between donor and acceptor (CIDA) to demonstrate a reversible energy transport. We show that these two definitions of work can impart contradictory results, that is, CIDA enhances the power and efficiency of the photosynthetic heat engine with definition B but not with A. Additionally, we find that both reversible and irreversible excitation-energy transport can be described with definition A, but definition B can only model irreversible transport. As a result, we conclude that definition A is more suitable for photosynthetic systems than definition B. (paper)

  9. 77 FR 2680 - Defense Federal Acquisition Regulation Supplement; Definition of Cost or Pricing Data

    Science.gov (United States)

    2012-01-19

    ... Regulation Supplement; Definition of Cost or Pricing Data AGENCY: Defense Acquisition Regulations System... Acquisition Regulation Supplement (DFARS) to update text addressing the definition of cost or pricing data... update the DFARS for consistency with FAR changes addressing the definition of cost or pricing data...

  10. Definition and Essence of Information

    Directory of Open Access Journals (Sweden)

    Tian-qing Qiao

    2011-10-01

    Full Text Available It has been 60 years since the essential attributes of information were explored in the field of philosophy, resulting in many contentious schools of thought and a wide division of opinions. Some scholars in China and abroad have been trying to build a new system of information philosophy from an ontological perspective, so as to explain the world. In this paper, the author puts forward a definition of information and its mathematical expressions in order to demonstrate that information is the collection of three kinds of attributes of things. Analysis suggests that the essence of information is the interaction of matters and the representation of the law of causality in philosophy. The paper also explores the ways in which information—as a noun—is a term that people have customarily used and confused. Eventually, the induction, differentiation and utilization of information, as conventionally understood, should be applied into studying matters themselves.

  11. Legislative virus in the system of the Criminal Code of Ukraine: definition and actualization of the problem on the example of Article 368-2 of the Criminal Code of Ukraine

    Directory of Open Access Journals (Sweden)

    Василь Миколайович Киричко

    2016-06-01

    Full Text Available In this article was first justified need for a scientific use of a term «legislative virus in the system of the Criminal Code of Ukraine» and its definition is provided. This virus is proposed to understand a legislative requirement, which, after its inclusion in the Criminal Code of Ukraine, interacting with other elements of the system, determines the content of the criminal law legalized the possibility of arbitrary violation of human rights at its application in practice. As an example, the presence of the virus in the Article 368-2 of the Criminal Code of Ukraine «Illegal enrichment» was detail analyzed, shown history of the emergence of the virus and its impact on the determination of the content of this Article and how it causes human rights violations in the application of this Article in practice. The search of the viruses in the system of the Criminal Code of Ukraine is recognized the urgent task for the science of criminal law. Fighting these viruses is one of the areas of implementation of the rule of law principle in criminal law of Ukraine.

  12. The definition of the western boundary of the Guarani Aquifer System (Gran Chaco, Argentina): technical or conventional; Definicion del limite occidental del Sistema Acuifero Guarani (Gran Chaco, Argentina): tecnico o convencional

    Energy Technology Data Exchange (ETDEWEB)

    Rodello, E. A.; Veroslavsky, G.

    2012-11-01

    Unlike the eastern, northern and southern borders of the Guarani aquifer system (GAS), which extends beneath considerable regions of Argentina, Brazil, Paraguay and Uruguay, the western boundary, within the Gran Chaco, has no clear hydrogeologic definition that can be recognized at either the surface or subsurface. For this reason, the precise location of the aquifer in this area is open to many different possibilities, depending upon the factors or interests involved. Thus technical specialists have proposed locations that include or exclude, according to their own criteria, large sections of the Argentine Gran Chaco, the management and use of which, from an administrative point of view, imply diverse economic consequences. The Lomadas de Otumpa, located near the border between the Santiago del Estero and Chaco provinces, are gently sloping hills, rising to a height of no more than 110 m above the wide expanse of surrounding plains comprising the Gran Chaco. They trend NNE and are 200 km long and from 20 to 80 km in width, reflecting the presence of the regional Otumpa alignment. The Lomadas de Otumpa are clearly defined at the surface and thus they allow a geographical boundary to be imposed on the GAS sequences according to: i) their notable structural features at the surface, and ii) the close matching of the thinning and/or absence of the associated sedimentary record underground. Because the definition of the limits of the GAS has an influence on its evaluation, management, use and conservation, both at a technical and administrative level, it is of great importance to ascertain its hydrogeologic boundaries. (Author)

  13. Interreligious Communication (Definition, Concepts, Situation

    Directory of Open Access Journals (Sweden)

    Vahid Safi Esfahani

    2015-12-01

    Full Text Available Abstract Religion and monotheistic beliefs are the bases of the human societies and culture and communications are the most important manifestations of these bases. About the three elements of religion, culture and communications, which act as the distinctions of human beings from other beings, and the relationship among them, many discussions have been occurred. In this article, the definitions offered for religion, culture and communication and their relationship, using the literature governing the Intercultural Communication and Cross-cultural Communication as two subjects discussed in the field of Cultural Communication and International Communication, have been reviewed and tried through a novel method to promote the level of religion from a concept usually seen as something such as race, ethnic, identity and life style under the title of international communication and cultural communication to a much higher position and place it under the title of interreligious communication. Following creation of a new field of study, many of the scholars and thinkers who are concerned about that field get together and focus of its issues and try to offer definitions and divisions about the subject. Later, after accumulation of scientific materials about different issues in the field, the human knowledge in that subject starts to develop further and in a more organized way. In this regard, first, the preferred definitions of religion, culture, communication, and Interreligious Communication will be offered. Accordingly, every society includes a meaning structure which is called culture and communication would act as an interaction tool in this system whose task is coding and decoding. Religion is considered the origin of culture and the director of communication. Based on these primary definitions, the interreligious communication is defined as: the relationship between or among the monotheistic religions based on the common understanding of religious

  14. Interreligious Communication (Definition, Concepts, Situation

    Directory of Open Access Journals (Sweden)

    Hasan Bashir

    2016-01-01

    Full Text Available Abstract Religion and monotheistic beliefs are the bases of the human societies and culture and communications are the most important manifestations of these bases. About the three elements of religion, culture and communications, which act as the distinctions of human beings from other beings, and the relationship among them, many discussions have been occurred. In this article, the definitions offered for religion, culture and communication and their relationship, using the literature governing the Intercultural Communication and Cross-cultural Communication as two subjects discussed in the field of Cultural Communication and International Communication, have been reviewed and tried through a novel method to promote the level of religion from a concept usually seen as something such as race, ethnic, identity and life style under the title of international communication and cultural communication to a much higher position and place it under the title of interreligious communication. Following creation of a new field of study, many of the scholars and thinkers who are concerned about that field get together and focus of its issues and try to offer definitions and divisions about the subject. Later, after accumulation of scientific materials about different issues in the field, the human knowledge in that subject starts to develop further and in a more organized way. In this regard, first, the preferred definitions of religion, culture, communication, and Interreligious Communication will be offered. Accordingly, every society includes a meaning structure which is called culture and communication would act as an interaction tool in this system whose task is coding and decoding. Religion is considered the origin of culture and the director of communication. Based on these primary definitions, the interreligious communication is defined as: the relationship between or among the monotheistic religions based on the common understanding of religious

  15. Jenkins The Definitive Guide

    CERN Document Server

    Smart, John

    2011-01-01

    Streamline software development with Jenkins, the popular Java-based open source tool that has revolutionized the way teams think about Continuous Integration (CI). This complete guide shows you how to automate your build, integration, release, and deployment processes with Jenkins-and demonstrates how CI can save you time, money, and many headaches. Ideal for developers, software architects, and project managers, Jenkins: The Definitive Guide is both a CI tutorial and a comprehensive Jenkins reference. Through its wealth of best practices and real-world tips, you'll discover how easy it is

  16. Contemporary jewelry definitions

    Directory of Open Access Journals (Sweden)

    Marlon Aparecido Mercaldi

    2016-12-01

    Full Text Available Contemporary jewelry terminology is open to many criticism and weaknesses as it is confronted with the classic definition of jewelry and also often attached to the historical widespread idea of adornment and jewelry to modernity. Therefore one of the this article issues is to approach about what it is contemporary jewelry and how it can be defined. Thus, we present the topics related to the jewel discussion in contemporary times that are organized into a set of assumptions and approaches that help us provide an overview about the contemporary jewelry.

  17. The definition of alcoholism.

    Science.gov (United States)

    Madden, J S

    1993-11-01

    Formulations of alcohol dependence are continuously refreshed, in line with changing concepts and altered needs. Two new descriptions have been prepared: the revised WHO criteria for substance use disorders and an educative definition of alcoholism. The major sets of diagnostic criteria provided by WHO and by the American Psychiatric Association are moving closer together but have not solved all the semantic problems. More refined assessments are also available to quicken fulfillment of the long-awaited hope that treatments can be matched to patients.

  18. The 2014 International Society of Urological Pathology (ISUP) Consensus Conference on Gleason Grading of Prostatic Carcinoma: Definition of Grading Patterns and Proposal for a New Grading System.

    Science.gov (United States)

    Epstein, Jonathan I; Egevad, Lars; Amin, Mahul B; Delahunt, Brett; Srigley, John R; Humphrey, Peter A

    2016-02-01

    In November, 2014, 65 prostate cancer pathology experts, along with 17 clinicians including urologists, radiation oncologists, and medical oncologists from 19 different countries gathered in a consensus conference to update the grading of prostate cancer, last revised in 2005. The major conclusions were: (1) Cribriform glands should be assigned a Gleason pattern 4, regardless of morphology; (2) Glomeruloid glands should be assigned a Gleason pattern 4, regardless of morphology; (3) Grading of mucinous carcinoma of the prostate should be based on its underlying growth pattern rather than grading them all as pattern 4; and (4) Intraductal carcinoma of the prostate without invasive carcinoma should not be assigned a Gleason grade and a comment as to its invariable association with aggressive prostate cancer should be made. Regarding morphologies of Gleason patterns, there was clear consensus on: (1) Gleason pattern 4 includes cribriform, fused, and poorly formed glands; (2) The term hypernephromatoid cancer should not be used; (3) For a diagnosis of Gleason pattern 4, it needs to be seen at 10x lens magnification; (4) Occasional/seemingly poorly formed or fused glands between well-formed glands is insufficient for a diagnosis of pattern 4; (5) In cases with borderline morphology between Gleason pattern 3 and pattern 4 and crush artifacts, the lower grade should be favored; (6) Branched glands are allowed in Gleason pattern 3; (7) Small solid cylinders represent Gleason pattern 5; (8) Solid medium to large nests with rosette-like spaces should be considered to represent Gleason pattern 5; and (9) Presence of unequivocal comedonecrosis, even if focal is indicative of Gleason pattern 5. It was recognized by both pathologists and clinicians that despite the above changes, there were deficiencies with the Gleason system. The Gleason grading system ranges from 2 to 10, yet 6 is the lowest score currently assigned. When patients are told that they have a Gleason score 6 out

  19. The definite article in Romance expletives and long weak definites

    Directory of Open Access Journals (Sweden)

    M.Teresa Espinal

    2017-03-01

    Full Text Available This paper focuses on some issues involving expletive articles and long weak definites in Romance (mainly Spanish, Brazilian Portuguese and Catalan, in comparison to DPs that elicit a strong reading. We show the similarities between expletive definites and long weak definites, and we argue for an analysis in common to other polarity items in terms of polarity sensitivity. We reach the conclusion that the definite article in Romance comes in two variants: the referentially unique variant (to be translated as the semantic 'iota 'operator and the polar variant, formally characterized with an abstract [+σ] feature, that encodes a weak bound reading (to be semantically translated by an existential operator.

  20. The Imputed Valuation and Adjusted Tax Base Concept: A System to Incorporate in Lieu of Property Tax Revenues in Definition of Wealth for Equalization Purposes.

    Science.gov (United States)

    Hill, Richard L.; Torgeson, Ronald

    1987-01-01

    Outlines how the state of North Dakota is developing a system for incorporating the revenue from the coal and petroleum industries into the tax base for local school support as part of an equalization plan for supporting basic services during a depressed economic period. (MD)

  1. Integrated Application of Active Controls (IAAC) technology to an advanced subsonic transport project: Current and advanced act control system definition study, volume 1

    Science.gov (United States)

    Hanks, G. W.; Shomber, H. A.; Dethman, H. A.; Gratzer, L. B.; Maeshiro, A.; Gangsaas, D.; Blight, J. D.; Buchan, S. M.; Crumb, C. B.; Dorwart, R. J.

    1981-01-01

    An active controls technology (ACT) system architecture was selected based on current technology system elements and optimal control theory was evaluated for use in analyzing and synthesizing ACT multiple control laws. The system selected employs three redundant computers to implement all of the ACT functions, four redundant smaller computers to implement the crucial pitch-augmented stability function, and a separate maintenance and display computer. The reliability objective of probability of crucial function failure of less than 1 x 10 to the -9th power per flight of 1 hr can be met with current technology system components, if the software is assumed fault free and coverage approaching 1.0 can be provided. The optimal control theory approach to ACT control law synthesis yielded comparable control law performance much more systematically and directly than the classical s-domain approach. The ACT control law performance, although somewhat degraded by the inclusion of representative nonlinearities, remained quite effective. Certain high-frequency gust-load alleviation functions may require increased surface rate capability.

  2. The definition, selection and implementation of a new Clinical Information System to prepare the hospital for the electronic future : an example of project-based education

    NARCIS (Netherlands)

    Spil, Antonius A.M.; van de Meeberg, Henk J.; Sikkel, Nicolaas

    The software supplier of a large hospital has been taken over. The hospital gets notice that the central hospital information system (HIS) will no longer be maintained, starting next year. This problem, not uncommon in business today, is used as a real-life case in a project-based course for first

  3. Definition of validated membrane reactor model for 5 kW power output CHP system for different natural gas compositions

    NARCIS (Netherlands)

    Di Marcoberardino, Gioele; Gallucci, Fausto; Manzolini, Giampaolo; van Sint Annaland, Martin

    2016-01-01

    Over the last years, many studies focused on the development of membrane reactors for micro-cogeneration systems based on PEM fuel cells, thanks to its unique feature of separating pure hydrogen. This work deals with (i) the design of a fluidized bed membrane reactor flexible towards different

  4. Conceptual design of a crewed reusable space transportation system aimed at parabolic flights: stakeholder analysis, mission concept selection, and spacecraft architecture definition

    Science.gov (United States)

    Fusaro, Roberta; Viola, Nicole; Fenoglio, Franco; Santoro, Francesco

    2017-03-01

    This paper proposes a methodology to derive architectures and operational concepts for future earth-to-orbit and sub-orbital transportation systems. In particular, at first, it describes the activity flow, methods, and tools leading to the generation of a wide range of alternative solutions to meet the established goal. Subsequently, the methodology allows selecting a small number of feasible options among which the optimal solution can be found. For the sake of clarity, the first part of the paper describes the methodology from a theoretical point of view, while the second part proposes the selection of mission concepts and of a proper transportation system aimed at sub-orbital parabolic flights. Starting from a detailed analysis of the stakeholders and their needs, the major objectives of the mission have been derived. Then, following a system engineering approach, functional analysis tools as well as concept of operations techniques allowed generating a very high number of possible ways to accomplish the envisaged goals. After a preliminary pruning activity, aimed at defining the feasibility of these concepts, more detailed analyses have been carried out. Going on through the procedure, the designer should move from qualitative to quantitative evaluations, and for this reason, to support the trade-off analysis, an ad-hoc built-in mission simulation software has been exploited. This support tool aims at estimating major mission drivers (mass, heat loads, manoeuverability, earth visibility, and volumetric efficiency) as well as proving the feasibility of the concepts. Other crucial and multi-domain mission drivers, such as complexity, innovation level, and safety have been evaluated through the other appropriate analyses. Eventually, one single mission concept has been selected and detailed in terms of layout, systems, and sub-systems, highlighting also logistic, safety, and maintainability aspects.

  5. Definition of IGRT

    International Nuclear Information System (INIS)

    Lief, Eugene

    2008-01-01

    Two definitions of image-guided radiation therapy (IGRT) are cited: 'Frequent imaging in the treatment room during a course of radiotherapy to guide the treatment process' and 'Any use of planar imaging, volumetric imaging or volumetric cine imaging, marker localization, marker tracking, patient surface imaging or patient surface tracking to improve the precision of radiation-therapy delivery'. Also cited are the sentences 'IGRT refers broadly to treatment delivery using modern imaging methods, such as CT, MRI, PET and Ultrasound, in target and non-target structures and in RT definition, design and delivery...' and 'IGRT includes, but is not limited to, 3DCRT, IMRT: stereotactic radiosurgery, stereotactic RT, and brachytherapy...'. Purposes include: Precise patient positioning; Automatic localization of bony structures or implanted fiducial markers; Imaging and positioning of soft tissue tumors and critical structures; Margin reduction and healthy organ sparing; and Delivering the desired dose distribution. On the negative side are the following factors: Physics staffing at treatment delivery Longer treatment times: 1 min. arm deployment, setup for scan, 1 min. gantry rotation - volume image acquisition, 30 sec. reconstruction (depends on resolution), 30 sec. load CT and CB into registration; Registration: from few sec. to few min.; Feasible if the number of treatments is low. The history of IGRT is mentioned, instrumentation is described using ample photographs, and many applications are shown. (P.A.)

  6. Definition of an 802.11 Interface Management Process in a Proposed System for Transmission Capacity Enhancement in Wireless Mesh Networks

    Directory of Open Access Journals (Sweden)

    Christian Köbel

    2015-01-01

    Full Text Available 802.11-based wireless mesh networks (WMNs as last mile solutions frequently become bottlenecks in the overall Internet communication structure. The lack of end-to-end capacity on routes also affects vertical traffic coming from or flowing towards external networks, such as the Internet. The presented approach aims to increase the overall network performance by exploiting channel diversity and to additionally favor vertical traffic. To achieve this, first we propose a general system that modifies an existing mesh node architecture, in order to prepare a more efficient resource management and to enhance the restricted transmission capacity in standard WMNs. The parallel use of nonoverlapping channels, based on a multiradio node, marks the starting point. The system treats aspects of channel assignment, traffic analysis, and fast layer 2 forwarding. Then, the impact of a novel Multihop Radio Resource Management process is discussed as a relevant component of this new system architecture. The process combines per-hop priority queuing and load balancing in a novel way. It was designed, developed, and evaluated in the presented paper, resulting in the fact that capacity in WMNs was significantly increased, Quality-of-Service parameters were improved, and more efficient use of multiple radios could be reached. The proposed process was validated using a simulation approach.

  7. Diagnosis and definition of an action plan related to the management system conformed to the ISO 17025; case of the laboratory of Microbiology - CNSTN

    International Nuclear Information System (INIS)

    Adeili, Abderrahmen

    2007-01-01

    The accreditations permit the laboratories of tests and analysis to prove the quality of their organization and to ensure the reliability of their results. This report - ratio approaches the various stages of the installation from a system of management quality, within a microbiological analysis laboratory with the CNSTN ( National center for nuclear sciences and technologies). The setting is begin with the staff training on the requirements from the standard ISO 17025. In continuation a plan of initial diagnosis to locate the laboratory compared to the requirements of the standard to succeed finally an action plan detailing the actions to be carried out to reach the accreditation. (Author). 7 refs

  8. Bullying by Definition: An Examination of Definitional Components of Bullying

    Science.gov (United States)

    Goldsmid, Susan; Howie, Pauline

    2014-01-01

    Lack of definitional consensus remains an important unresolved issue within bullying research. This study examined the ability of definitional variables to predict overall level of victimisation (distress, power inequity, and provocation as predictors) and bullying (intention to harm, power inequity, and provocation as predictors) in 246…

  9. Storage shaft definitive closure plug and method

    International Nuclear Information System (INIS)

    Dardaine, M.

    1992-01-01

    A definitive closure plug system for radioactive waste storage at any deepness, is presented. The inherent weight of the closure materials is used to set in the plug: these materials display an inclined sliding surface in such a way that when the closure material rests on a stable surface of the shaft storage materials, the relative sliding of the different materials tends to spread them towards the shaft internal wall so as to completely occlude the shaft

  10. An assessment of the new generation three-dimensional high definition laparoscopic vision system on surgical skills: a randomized prospective study.

    Science.gov (United States)

    Usta, Taner A; Ozkaynak, Aysel; Kovalak, Ebru; Ergul, Erdinc; Naki, M Murat; Kaya, Erdal

    2015-08-01

    Two-dimensional (2D) view is known to cause practical difficulties for surgeons in conventional laparoscopy. Our goal was to evaluate whether the new-generation, Three-Dimensional Laparoscopic Vision System (3D LVS) provides greater benefit in terms of execution time and error number during the performance of surgical tasks. This study tests the hypothesis that the use of the new generation 3D LVS can significantly improve technical ability on complex laparoscopic tasks in an experimental model. Twenty-four participants (8 experienced, 8 minimally experienced, and 8 inexperienced) were evaluated for 10 different tasks in terms of total execution time and error number. The 4-point lickert scale was used for subjective assessment of the two imaging modalities. All tasks were completed by all participants. Statistically significant difference was determined between 3D and 2D systems in the tasks of bead transfer and drop, suturing, and pick-and-place in the inexperienced group; in the task of passing through two circles with the needle in the minimally experienced group; and in the tasks of bead transfer and drop, suturing and passing through two circles with the needle in the experienced group. Three-dimensional imaging was preferred over 2D in 6 of the 10 subjective criteria questions on 4-point lickert scale. The majority of the tasks were completed in a shorter time using 3D LVS compared to 2D LVS. The subjective Likert-scale ratings from each group also demonstrated a clear preference for 3D LVS. New 3D LVS has the potential to improve the learning curve, and reduce the operating time and error rate during the performances of laparoscopic surgeons. Our results suggest that the new-generation 3D HD LVS will be helpful for surgeons in laparoscopy (Clinical Trial ID: NCT01799577, Protocol ID: BEHGynobs-4).

  11. The impact of different definitions and reference groups on the prevalence of cognitive impairment: a study in postmenopausal breast cancer patients before the start of adjuvant systemic therapy.

    Science.gov (United States)

    Schilder, Christina M; Seynaeve, Caroline; Linn, Sabine C; Boogerd, Willem; Gundy, Chad M; Beex, Louk V; van Dam, Frits S; Schagen, Sanne B

    2010-04-01

    Several prospective studies into the effects of adjuvant systemic therapy on cognitive functioning suggest that a proportion of breast cancer patients show cognitive deficits already before the start of systemic therapy. Owing to, among others, methodological inconsistency, studies report different rates of this pre-treatment cognitive impairment. We examined the impact of four different criteria of cognitive impairment and two types of reference groups (a study-specific healthy reference group versus published normative data) on the prevalence of cognitive impairment. Two hundred and five postmenopausal breast cancer patients underwent a battery of neuropsychological tests before the start of endocrine therapy, 124 healthy subjects underwent the same tests. Proportions of cognitive impaired patients were calculated for each of four criteria for cognitive impairment, using (1) study-specific healthy controls and (2) published norms of healthy controls as reference groups. The prevalence of cognitive impairment varied greatly with the strictness of the criterion, as expected, but also was dependent on the reference group used. Cognitive impairment, relative to published norms, ranged from 1% for the strictest to 36.6% for the less strict criterion, cognitive impairment relative to study-specific healthy controls, ranged from 13.7 to 45.4% for the same criteria. This study highlights contrasting proportions of cognitive impairment by using different criteria for cognitive impairment and different reference groups. (Dis)advantages of the methods using a criterion for cognitive impairment, and of the use of published norms versus a study-specific reference group are discussed. Copyright 2009 John Wiley & Sons, Ltd.

  12. Viruses, definitions and reality

    Directory of Open Access Journals (Sweden)

    Libia Herrero-Uribe

    2011-09-01

    Full Text Available Viruses are known to be abundant, ubiquitous, and to play a very important role in the health and evolution of life organisms. However, most biologists have considered them as entities separate from the realm of life and acting merely as mechanical artifacts that can exchange genes between different organisms. This article reviews some definitions of life organisms to determine if viruses adjust to them, and additionally, considers new discoveries to challenge the present definition of viruses. Definitions of life organisms have been revised in order to validate how viruses fit into them. Viral factories are discussed since these mini-organelles are a good example of the complexity of viral infection, not as a mechanical usurpation of cell structures, but as a driving force leading to the reorganization and modification of cell structures by viral and cell enzymes. New discoveries such as the Mimivirus, its virophage and viruses that produce filamentous tails when outside of their host cell, have stimulated the scientific community to analyze the current definition of viruses. One way to be free for innovation is to learn from life, without rigid mental structures or tied to the past, in order to understand in an integrated view the new discoveries that will be unfolded in future research. Life processes must be looked from the complexity and trans-disciplinarity perspective that includes and accepts the temporality of the active processes of life organisms, their interdependency and interrelation among them and their environment. New insights must be found to redefine life organisms, especially viruses, which still are defined using the same concepts and knowledge of the fifties. Rev. Biol. Trop. 59 (3: 993-998. Epub 2011 September 01.Los virus son abundantes, ubicuos, y juegan un papel muy importante en la salud y en la evolución de los organismos vivos. Sin embargo, la mayoría de los biólogos los siguen considerado como entidades separadas

  13. Consciousness: function and definition.

    Science.gov (United States)

    Niedermeyer, E

    1994-07-01

    The term "consciousness" plays an enormous role in the clinical assessment of patients and also in psychophysiological considerations. It has often been said that consciousness is a term that defies definition. This lack of definability, however, might be more apparent than real. In the multitude of facets, three main components can be singled out: a) vigilance, b) mental contents and c) selective attention. Vigilance, not to be equated with consciousness, is most amenable to electrophysiological studies. The stages of sleep have fairly well standardized EEG correlates, unlike the comatose states. The overflowing wealth of mental contents is constantly adjusted to momentary needs by the mechanism of selective attention. Awareness is a subcomponent and differs from both vigilance and consciousness. Emotionality is particularly important among the variety of further subcomponents. The time factor must be taken into account in order to understand the dynamics and fluctuations of consciousness.

  14. Two definitions for genders

    Science.gov (United States)

    Shin, Philip

    2011-10-01

    By my definition, man and woman are the same fact to say. So man and woman have the same thinkings and same existence. But when I say again for man and woman, they are different for sex as the two different persons. They are different each two persons. As an example, by quantum, sex and color is different (the same existence and also different kind with quantum way-push and pull at the same time), also they are the same as they are our ID (hormones) and also dream matter. The same way, I hope we go to heaven and god will say you are the truth like it to be after the end of the world. I wish man and woman are different as it is more fun.

  15. Definition of containment failure

    International Nuclear Information System (INIS)

    Cybulskis, P.

    1982-01-01

    Core meltdown accidents of the types considered in probabilistic risk assessments (PRA's) have been predicted to lead to pressures that will challenge the integrity of containment structures. Review of a number of PRA's indicates considerable variation in the predicted probability of containment failure as a function of pressure. Since the results of PRA's are sensitive to the prediction of the occurrence and the timing of containment failure, better understanding of realistic containment capabilities and a more consistent approach to the definition of containment failure pressures are required. Additionally, since the size and location of the failure can also significantly influence the prediction of reactor accident risk, further understanding of likely failure modes is required. The thresholds and modes of containment failure may not be independent

  16. 16 CFR 316.2 - Definitions.

    Science.gov (United States)

    2010-01-01

    ... or general partnership, corporation, or other business entity. (i) The definition of the term... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Definitions. 316.2 Section 316.2 Commercial... Definitions. (a) The definition of the term “affirmative consent” is the same as the definition of that term...

  17. Quasicrystals: A matter of definition

    OpenAIRE

    Lifshitz, Ron

    2003-01-01

    It is argued that the prevailing definition of quasicrystals, requiring them to contain an axis of symmetry that is forbidden in periodic crystals, is inadequate. This definition is too restrictive in that it excludes an important and interesting collection of structures that exhibit all the well-known properties of quasicrystals without possessing any forbidden symmetries.

  18. Nuclear engineering terms and definitions

    International Nuclear Information System (INIS)

    1981-01-01

    The most important nuclear engineering's terms and definitions are given in this standard. The definitions take into account the Austrian Regulations for Radiation Protection, for and pertinent ISO and DIN-Standards as also the OENORM A7006 and OENORM A6601. (M.T.)

  19. Interprofessionals' definitions of moral resilience.

    Science.gov (United States)

    Holtz, Heidi; Heinze, Katherine; Rushton, Cynda

    2018-02-01

    To describe common characteristics and themes of the concept of moral resilience as reported by interprofessional clinicians in health care. Research has provided an abundance of data on moral distress with limited research to resolve and help negate the detrimental effects of moral distress. This reveals a critical need for research on how to mitigate the negative consequences of moral distress that plague nurses and other healthcare providers. One promising direction is to build resilience as an individual strategy concurrently with interventions to build a culture of ethical practice. Qualitative descriptive methods were used to analyse descriptive definitions provided by 184 interprofessional clinicians in health care attending educational programmes in various locations as well as a small group of 23 professionals with backgrounds such as chaplaincy and nonhealthcare providers. Three primary themes and three subthemes emerged from the data. The primary themes are integrity-personal and relational, and buoyancy. The subthemes are self-regulation, self-stewardship and moral efficacy. Individual healthcare providers and healthcare systems can use this research to help negate the detrimental effects of moral distress by finding ways to develop interventions to cultivate moral resilience. Moral resilience involves not only building and fostering the individual's capacity to navigate moral adversity but also developing systems that support a culture of ethical practice for healthcare providers. © 2017 John Wiley & Sons Ltd.

  20. 40 CFR 63.11132 - What definitions apply to this subpart?

    Science.gov (United States)

    2010-07-01

    ... supersede definitions in other parts or subparts. Dual-point vapor balance system means a type of vapor balance system in which the storage tank is equipped with an entry port for a gasoline fill pipe and a.... Bottom filling of gasoline storage tanks is included in this definition. Vapor balance system means a...