WorldWideScience

Sample records for times higher production

  1. The Times Higher Education Ranking Product: Visualising Excellence through Media

    Science.gov (United States)

    Stack, Michelle L.

    2013-01-01

    This paper will examine the Times Higher Education's (THE) World University Rankings as a corporate media product. A number of empirical studies have critiqued the methodology of the THE, yet individuals, Higher Education Institutions (HEIs) and governments continue to use them for decision-making. This paper analyses the influence of…

  2. Tensor-product preconditioners for higher-order space-time discontinuous Galerkin methods

    Science.gov (United States)

    Diosady, Laslo T.; Murman, Scott M.

    2017-02-01

    A space-time discontinuous-Galerkin spectral-element discretization is presented for direct numerical simulation of the compressible Navier-Stokes equations. An efficient solution technique based on a matrix-free Newton-Krylov method is developed in order to overcome the stiffness associated with high solution order. The use of tensor-product basis functions is key to maintaining efficiency at high-order. Efficient preconditioning methods are presented which can take advantage of the tensor-product formulation. A diagonalized Alternating-Direction-Implicit (ADI) scheme is extended to the space-time discontinuous Galerkin discretization. A new preconditioner for the compressible Euler/Navier-Stokes equations based on the fast-diagonalization method is also presented. Numerical results demonstrate the effectiveness of these preconditioners for the direct numerical simulation of subsonic turbulent flows.

  3. Tensor-Product Preconditioners for Higher-Order Space-Time Discontinuous Galerkin Methods

    Science.gov (United States)

    Diosady, Laslo T.; Murman, Scott M.

    2016-01-01

    space-time discontinuous-Galerkin spectral-element discretization is presented for direct numerical simulation of the compressible Navier-Stokes equat ions. An efficient solution technique based on a matrix-free Newton-Krylov method is developed in order to overcome the stiffness associated with high solution order. The use of tensor-product basis functions is key to maintaining efficiency at high order. Efficient preconditioning methods are presented which can take advantage of the tensor-product formulation. A diagonalized Alternating-Direction-Implicit (ADI) scheme is extended to the space-time discontinuous Galerkin discretization. A new preconditioner for the compressible Euler/Navier-Stokes equations based on the fast-diagonalization method is also presented. Numerical results demonstrate the effectiveness of these preconditioners for the direct numerical simulation of subsonic turbulent flows.

  4. Tensor products of higher almost split sequences

    OpenAIRE

    Pasquali, Andrea

    2015-01-01

    We investigate how the higher almost split sequences over a tensor product of algebras are related to those over each factor. Herschend and Iyama gave a precise criterion for when the tensor product of an $n$-representation finite algebra and an $m$-representation finite algebra is $(n+m)$-representation finite. In this case we give a complete description of the higher almost split sequences over the tensor product by expressing every higher almost split sequence as the mapping cone of a suit...

  5. Particle production in higher derivative theory

    Indian Academy of Sciences (India)

    Lemaitre–Robertson–Walker cosmological model during the early stages of the universe is analysed in the framework of higher derivative theory. The universe has been considered as an open thermodynamic system where particle production ...

  6. Higher Toda brackets and Massey products

    OpenAIRE

    Baues, Hans-Joachim; Blanc, David; Gondhali, Shilpa

    2015-01-01

    We provide a uniform definition of higher order Toda brackets in a general setting, covering the known cases of long Toda brackets for topological spaces and chain complexes and Massey products for differential graded algebras, among others.

  7. Particle production in higher derivative theory

    Indian Academy of Sciences (India)

    Cosmological models; particle production; higher derivative theory of gravitation. PACS No. 98.80. 1. ... is of singular models where the cosmic expansion is driven by the big-bang impulse; all ... According to Gibbs integrability condition, one cannot independently specify an equa- .... [3] B Hartle and S W Hawking Phys. Rev.

  8. Real time production optimization

    Energy Technology Data Exchange (ETDEWEB)

    Saputelli, Luigi; Otavio, Joao; Araujo, Turiassu; Escorcia, Alvaro [Halliburton, Houston, TX (United States). Landmark Division

    2004-07-01

    Production optimization encompasses various activities of measuring, analyzing, modeling, prioritizing and implementing actions to enhance productivity of a field. We present a state-of-the-art framework for optimizing production on a continuous basis as new sensor data is acquired in real time. Permanently acquired data is modeled and analyzed in order to create predictive models. A model based control strategy is used to regulate well and field instrumentation. The optimum field operating point, which changes with time, satisfies the maximum economic return. This work is a starting point for further development in automatic, intelligent reservoir technologies which get the most out of the abilities of permanent, instrumented wells and remotely activated downhole completions. The strategy, tested with history-matched data from a compartmentalised giant field, proved to reduce operating costs while increasing oil recovery by 27% in this field. (author)

  9. Higher Education: A Time for Triage?

    Science.gov (United States)

    Lagowski, J. J.

    1995-10-01

    . Devise a use of technology that improves productivity, which in turn requires the definition of productivity in an academic setting. Serious discussion of these issues and attempts to address them will undoubtedly prove uncomfortable, perhaps even threatening, to many in academia. Some may question whether the institutions of higher education that we now know as universities will still be "universities." But then, what is a university?

  10. Higher dimensional time-energy entanglement

    International Nuclear Information System (INIS)

    Richart, Daniel Lampert

    2014-01-01

    Judging by the compelling number of innovations based on taming quantum mechanical effects, such as the development of transistors and lasers, further research in this field promises to tackle further technological challenges in the years to come. This statement gains even more importance in the information processing scenario. Here, the growing data generation and the correspondingly higher need for more efficient computational resources and secure high bandwidth networks are central problems which need to be tackled. In this sense, the required CPU minituarization makes the design of structures at atomic levels inevitable, as foreseen by Moore's law. From these perspectives, it is necessary to concentrate further research efforts into controlling and manipulating quantum mechanical systems. This enables for example to encode quantum superposition states to tackle problems which are computationally NP hard and which therefore cannot be solved efficiently by classical computers. The only limitation affecting these solutions is the low scalability of existing quantum systems. Similarly, quantum communication schemes are devised to certify the secure transmission of quantum information, but are still limited by a low transmission bandwidth. This thesis follows the guideline defined by these research projects and aims to further increase the scalability of the quantum mechanical systems required to perform these tasks. The method used here is to encode quantum states into photons generated by spontaneous parametric down-conversion (SPDC). An intrinsic limitation of photons is that the scalability of quantum information schemes employing them is limited by the low detection efficiency of commercial single photon detectors. This is addressed by encoding higher dimensional quantum states into two photons, increasing the scalability of the scheme in comparison to multi-photon states. Further on, the encoding of quantum information into the emission-time degree of

  11. Higher dimensional time-energy entanglement

    Energy Technology Data Exchange (ETDEWEB)

    Richart, Daniel Lampert

    2014-07-08

    Judging by the compelling number of innovations based on taming quantum mechanical effects, such as the development of transistors and lasers, further research in this field promises to tackle further technological challenges in the years to come. This statement gains even more importance in the information processing scenario. Here, the growing data generation and the correspondingly higher need for more efficient computational resources and secure high bandwidth networks are central problems which need to be tackled. In this sense, the required CPU minituarization makes the design of structures at atomic levels inevitable, as foreseen by Moore's law. From these perspectives, it is necessary to concentrate further research efforts into controlling and manipulating quantum mechanical systems. This enables for example to encode quantum superposition states to tackle problems which are computationally NP hard and which therefore cannot be solved efficiently by classical computers. The only limitation affecting these solutions is the low scalability of existing quantum systems. Similarly, quantum communication schemes are devised to certify the secure transmission of quantum information, but are still limited by a low transmission bandwidth. This thesis follows the guideline defined by these research projects and aims to further increase the scalability of the quantum mechanical systems required to perform these tasks. The method used here is to encode quantum states into photons generated by spontaneous parametric down-conversion (SPDC). An intrinsic limitation of photons is that the scalability of quantum information schemes employing them is limited by the low detection efficiency of commercial single photon detectors. This is addressed by encoding higher dimensional quantum states into two photons, increasing the scalability of the scheme in comparison to multi-photon states. Further on, the encoding of quantum information into the emission-time degree of

  12. Workforce Development, Higher Education and Productive Systems

    Science.gov (United States)

    Hordern, Jim

    2014-01-01

    Workforce development partnerships between higher education institutions and employers involve distinctive social and technical dynamics that differ from dominant higher education practices in the UK. The New Labour government encouraged such partnerships in England, including through the use of funding that aimed to stimulate reform to…

  13. Does the New Economy Create Higher Productivity?

    DEFF Research Database (Denmark)

    Dilling-Hansen, Mogens; Madsen, Erik Strøjer; Smith, Valdemar

    2002-01-01

    The rapid and continuous growth in the US in the 1990s and the simultaneous boom in the IT industry created the concept "The New Economy". What connects the two phenomena is that the IT industry alone is considered productive, and increased productivity in other industries, as a result of increased...

  14. Improving Measurement of Productivity in Higher Education

    Science.gov (United States)

    Massy, William F.; Sullivan, Teresa A.; Mackie, Christopher

    2013-01-01

    Higher education is a critical element of the American economy, because of both its benefits and its costs to individuals and taxpayers. Yet we know very little about the relationships between the things colleges and universities do and the resources they need to do them. Currently, shrinking public support and increasing tuition make it urgent…

  15. Higher Education and Class: Production or Reproduction?

    Science.gov (United States)

    Sotiris, Panagiotis

    2013-01-01

    This article deals with questions relating to the role of education and especially Higher Education in the reproduction of class division in society. Social classes and how they are formed and reproduced has always been one of the greatest challenges for Marxism and social theory in general. The questions regarding the role of education, and…

  16. A higher twist correction to heavy quark production

    International Nuclear Information System (INIS)

    Brodsky, S.J.; Gunion, J.F.; Soper, D.E.

    1987-06-01

    The leading twist prediction for heavy quark production and a model for a higher twist correction that may be important for charm production was discussed. The correction arises from the interaction of the charm quark with spectator quarks

  17. Charged fluid distribution in higher dimensional spheroidal space-time

    Indian Academy of Sciences (India)

    A general solution of Einstein field equations corresponding to a charged fluid distribution on the background of higher dimensional spheroidal space-time is obtained. The solution generates several known solutions for superdense star having spheroidal space-time geometry.

  18. Just in Time Research: Data Breaches in Higher Education

    Science.gov (United States)

    Grama, Joanna

    2014-01-01

    This "Just in Time" research is in response to recent discussions on the EDUCAUSE Higher Education Information Security Council (HEISC) discussion list about data breaches in higher education. Using data from the Privacy Rights Clearinghouse, this research analyzes data breaches attributed to higher education. The results from this…

  19. Part-Time Higher Education: Employer Engagement under Threat?

    Science.gov (United States)

    Mason, Geoff

    2014-01-01

    Employer support for employees who are studying part-time for higher education qualifications constitutes a form of indirect employer engagement with higher education institutions that has contributed strongly to the development of work-related skills and knowledge over the years. However, this form of employer engagement with higher education…

  20. Research Productivity and Its Policy Implications in Higher Education Institutions

    Science.gov (United States)

    Quimbo, Maria Ana T.; Sulabo, Evangeline C.

    2014-01-01

    Responding to the Commission on Higher Education's development plan of enhancing research culture among higher education institutions, this study was conducted to analyze the research productivity of selected higher education institutions. It covered five state universities in the Philippines where a total of 377 randomly selected faculty members…

  1. Time-Discrete Higher-Order ALE Formulations: Stability

    KAUST Repository

    Bonito, Andrea; Kyza, Irene; Nochetto, Ricardo H.

    2013-01-01

    on the stability of the PDE but may influence that of a discrete scheme. We examine this critical issue for higher-order time stepping without space discretization. We propose time-discrete discontinuous Galerkin (dG) numerical schemes of any order for a time

  2. Ecuador's higher education system in times of change

    OpenAIRE

    Van Hoof, Hubert B.; Estrella, Mateo; Eljuri, María Isabel; Torres León, Leonardo

    2013-01-01

    Ecuador’s higher education system is undergoing dramatic changes. The National Constitution of 2008 and the Higher Education Law of 2010 have changed the way Ecuador’s universities are funded, administered, and accredited. The importance of research was elevated and drastic changes were made to the academic qualifications and employment conditions of full-time faculty. This article describes the attempt to raise the level of Ecuador’s system of higher education and its impact on faculty and a...

  3. Ecuador's Higher Education System in Times of Change

    OpenAIRE

    Van Hoof, Hubert

    2013-01-01

    Ecuador’s higher education system is undergoing dramatic changes. The National Constitution of 2008 and the Higher Education Law of 2010 have changed the way Ecuador’s universities are funded, administered, and accredited. The importance of research was elevated and drastic changes were made to the academic qualifications and employment conditions of full-time faculty. This article describes the attempt to raise the level of Ecuador’s system of higher education and its impact on faculty and a...

  4. Adopting Consumer Time: Potential Issues for Higher Education

    Science.gov (United States)

    Gibbs, Paul

    2009-01-01

    Time and temporality have received little attention in the consumerism, marketing or, until recently, higher education literature. This paper attempts to compare the notions of timing implicit in education as "paideia" (transitional personal growth) with that implicit in consumerism and the marketing practices which foster it. This…

  5. Warped product space-times

    Science.gov (United States)

    An, Xinliang; Wong, Willie Wai Yeung

    2018-01-01

    Many classical results in relativity theory concerning spherically symmetric space-times have easy generalizations to warped product space-times, with a two-dimensional Lorentzian base and arbitrary dimensional Riemannian fibers. We first give a systematic presentation of the main geometric constructions, with emphasis on the Kodama vector field and the Hawking energy; the construction is signature independent. This leads to proofs of general Birkhoff-type theorems for warped product manifolds; our theorems in particular apply to situations where the warped product manifold is not necessarily Einstein, and thus can be applied to solutions with matter content in general relativity. Next we specialize to the Lorentzian case and study the propagation of null expansions under the assumption of the dominant energy condition. We prove several non-existence results relating to the Yamabe class of the fibers, in the spirit of the black-hole topology theorem of Hawking–Galloway–Schoen. Finally we discuss the effect of the warped product ansatz on matter models. In particular we construct several cosmological solutions to the Einstein–Euler equations whose spatial geometry is generally not isotropic.

  6. Higher-Twist Dynamics in Large Transverse Momentum Hadron Production

    International Nuclear Information System (INIS)

    Francois, Alero

    2009-01-01

    A scaling law analysis of the world data on inclusive large-p # perpendicular# hadron production in hadronic collisions is carried out. A significant deviation from leading-twist perturbative QCD predictions at next-to-leading order is reported. The observed discrepancy is largest at high values of x # perpendicular# = 2p # perpendicular#/√s. In contrast, the production of prompt photons and jets exhibits the scaling behavior which is close to the conformal limit, in agreement with the leading-twist expectation. These results bring evidence for a non-negligible contribution of higher-twist processes in large-p # perpendicular# hadron production in hadronic collisions, where the hadron is produced directly in the hard subprocess rather than by gluon or quark jet fragmentation. Predictions for scaling exponents at RHIC and LHC are given, and it is suggested to trigger the isolated large-p # perpendicular# hadron production to enhance higher-twist processes.

  7. Engineering strategy of yeast metabolism for higher alcohol production

    Directory of Open Access Journals (Sweden)

    Shimizu Hiroshi

    2011-09-01

    Full Text Available Abstract Background While Saccharomyces cerevisiae is a promising host for cost-effective biorefinary processes due to its tolerance to various stresses during fermentation, the metabolically engineered S. cerevisiae strains exhibited rather limited production of higher alcohols than that of Escherichia coli. Since the structure of the central metabolism of S. cerevisiae is distinct from that of E. coli, there might be a problem in the structure of the central metabolism of S. cerevisiae. In this study, the potential production of higher alcohols by S. cerevisiae is compared to that of E. coli by employing metabolic simulation techniques. Based on the simulation results, novel metabolic engineering strategies for improving higher alcohol production by S. cerevisiae were investigated by in silico modifications of the metabolic models of S. cerevisiae. Results The metabolic simulations confirmed that the high production of butanols and propanols by the metabolically engineered E. coli strains is derived from the flexible behavior of their central metabolism. Reducing this flexibility by gene deletion is an effective strategy to restrict the metabolic states for producing target alcohols. In contrast, the lower yield using S. cerevisiae originates from the structurally limited flexibility of its central metabolism in which gene deletions severely reduced cell growth. Conclusions The metabolic simulation demonstrated that the poor productivity of S. cerevisiae was improved by the introduction of E. coli genes to compensate the structural difference. This suggested that gene supplementation is a promising strategy for the metabolic engineering of S. cerevisiae to produce higher alcohols which should be the next challenge for the synthetic bioengineering of S. cerevisiae for the efficient production of higher alcohols.

  8. Naked singularities in higher dimensional Vaidya space-times

    International Nuclear Information System (INIS)

    Ghosh, S. G.; Dadhich, Naresh

    2001-01-01

    We investigate the end state of the gravitational collapse of a null fluid in higher-dimensional space-times. Both naked singularities and black holes are shown to be developing as the final outcome of the collapse. The naked singularity spectrum in a collapsing Vaidya region (4D) gets covered with the increase in dimensions and hence higher dimensions favor a black hole in comparison to a naked singularity. The cosmic censorship conjecture will be fully respected for a space of infinite dimension

  9. Short time ahead wind power production forecast

    International Nuclear Information System (INIS)

    Sapronova, Alla; Meissner, Catherine; Mana, Matteo

    2016-01-01

    An accurate prediction of wind power output is crucial for efficient coordination of cooperative energy production from different sources. Long-time ahead prediction (from 6 to 24 hours) of wind power for onshore parks can be achieved by using a coupled model that would bridge the mesoscale weather prediction data and computational fluid dynamics. When a forecast for shorter time horizon (less than one hour ahead) is anticipated, an accuracy of a predictive model that utilizes hourly weather data is decreasing. That is because the higher frequency fluctuations of the wind speed are lost when data is averaged over an hour. Since the wind speed can vary up to 50% in magnitude over a period of 5 minutes, the higher frequency variations of wind speed and direction have to be taken into account for an accurate short-term ahead energy production forecast. In this work a new model for wind power production forecast 5- to 30-minutes ahead is presented. The model is based on machine learning techniques and categorization approach and using the historical park production time series and hourly numerical weather forecast. (paper)

  10. Short time ahead wind power production forecast

    Science.gov (United States)

    Sapronova, Alla; Meissner, Catherine; Mana, Matteo

    2016-09-01

    An accurate prediction of wind power output is crucial for efficient coordination of cooperative energy production from different sources. Long-time ahead prediction (from 6 to 24 hours) of wind power for onshore parks can be achieved by using a coupled model that would bridge the mesoscale weather prediction data and computational fluid dynamics. When a forecast for shorter time horizon (less than one hour ahead) is anticipated, an accuracy of a predictive model that utilizes hourly weather data is decreasing. That is because the higher frequency fluctuations of the wind speed are lost when data is averaged over an hour. Since the wind speed can vary up to 50% in magnitude over a period of 5 minutes, the higher frequency variations of wind speed and direction have to be taken into account for an accurate short-term ahead energy production forecast. In this work a new model for wind power production forecast 5- to 30-minutes ahead is presented. The model is based on machine learning techniques and categorization approach and using the historical park production time series and hourly numerical weather forecast.

  11. Metabolic Engineering of Microorganisms for the Production of Higher Alcohols

    Science.gov (United States)

    Choi, Yong Jun; Lee, Joungmin; Jang, Yu-Sin

    2014-01-01

    ABSTRACT Due to the increasing concerns about limited fossil resources and environmental problems, there has been much interest in developing biofuels from renewable biomass. Ethanol is currently used as a major biofuel, as it can be easily produced by existing fermentation technology, but it is not the best biofuel due to its low energy density, high vapor pressure, hygroscopy, and incompatibility with current infrastructure. Higher alcohols, including 1-propanol, 1-butanol, isobutanol, 2-methyl-1-butanol, and 3-methyl-1-butanol, which possess fuel properties more similar to those of petroleum-based fuel, have attracted particular interest as alternatives to ethanol. Since microorganisms isolated from nature do not allow production of these alcohols at high enough efficiencies, metabolic engineering has been employed to enhance their production. Here, we review recent advances in metabolic engineering of microorganisms for the production of higher alcohols. PMID:25182323

  12. Programming real-time executives in higher order language

    Science.gov (United States)

    Foudriat, E. C.

    1982-01-01

    Methods by which real-time executive programs can be implemented in a higher order language are discussed, using HAL/S and Path Pascal languages as program examples. Techniques are presented by which noncyclic tasks can readily be incorporated into the executive system. Situations are shown where the executive system can fail to meet its task scheduling and yet be able to recover either by rephasing the clock or stacking the information for later processing. The concept of deadline processing is shown to enable more effective mixing of time and information synchronized systems.

  13. Considerations for higher efficiency and productivity in research activities.

    Science.gov (United States)

    Forero, Diego A; Moore, Jason H

    2016-01-01

    There are several factors that are known to affect research productivity; some of them imply the need for large financial investments and others are related to work styles. There are some articles that provide suggestions for early career scientists (PhD students and postdocs) but few publications are oriented to professors about scientific leadership. As academic mentoring might be useful at all levels of experience, in this note we suggest several key considerations for higher efficiency and productivity in academic and research activities. More research is needed into the main work style features that differentiate highly productive scientists and research groups, as some of them could be innate and others could be transferable. As funding agencies, universities and research centers invest large amounts of money in order to have a better scientific productivity, a deeper understanding of these factors will be of high academic and societal impact.

  14. Time-Discrete Higher-Order ALE Formulations: Stability

    KAUST Repository

    Bonito, Andrea

    2013-01-01

    Arbitrary Lagrangian Eulerian (ALE) formulations deal with PDEs on deformable domains upon extending the domain velocity from the boundary into the bulk with the purpose of keeping mesh regularity. This arbitrary extension has no effect on the stability of the PDE but may influence that of a discrete scheme. We examine this critical issue for higher-order time stepping without space discretization. We propose time-discrete discontinuous Galerkin (dG) numerical schemes of any order for a time-dependent advection-diffusion-model problem in moving domains, and study their stability properties. The analysis hinges on the validity of the Reynold\\'s identity for dG. Exploiting the variational structure and assuming exact integration, we prove that our conservative and nonconservative dG schemes are equivalent and unconditionally stable. The same results remain true for piecewise polynomial ALE maps of any degree and suitable quadrature that guarantees the validity of the Reynold\\'s identity. This approach generalizes the so-called geometric conservation law to higher-order methods. We also prove that simpler Runge-Kutta-Radau methods of any order are conditionally stable, that is, subject to a mild ALE constraint on the time steps. Numerical experiments corroborate and complement our theoretical results. © 2013 Society for Industrial and Applied Mathematics.

  15. Term-time Employment and Student Attainment in Higher Education

    Directory of Open Access Journals (Sweden)

    Cath Dennis

    2018-04-01

    Full Text Available The number of UK full-time university students engaging in term-time employment (TTE is rising. Students engaging in TTE have previously been found to achieve less well academically than those who do not. This study aimed to explore patterns of TTE and academic achievement of undergraduates at a large UK higher education institution. Self-reported TTE hours were matched to attainment data for 1304 undergraduate students in levels 1-4 of study (SQCF levels 7-10. The majority of students in TTE (71%, n=621 reported undertaking TTE to cover essential living expenses. Compared to students not undertaking TTE, attainment was significantly better at low levels of TTE (1-10 hours, and only significantly worse when TTE was >30 hours/week. This pattern was magnified when job type was taken into account – students employed in skilled roles for ≤10 hours/week on average attained grades 7% higher than those not in TTE; students working >10 hours/week in unskilled positions showed a mean 1.6% lower grade. The impact of ‘academic potential’ (measured via incoming UCAS tariff was accounted for in the model. The finding that students engaging in some categories of TTE achieve better academic outcomes than their non-employed peers is worthy of further investigation. This study is unable to provide direct evidence of possible causation, but would tentatively suggest that students may benefit from taking on 10 or fewer hours of TTE per week.

  16. Zymomonas mobilis for fuel ethanol and higher value products.

    Science.gov (United States)

    Rogers, P L; Jeon, Y J; Lee, K J; Lawford, H G

    2007-01-01

    High oil prices, increasing focus on renewable carbohydrate-based feedstocks for fuels and chemicals, and the recent publication of its genome sequence, have provided continuing stimulus for studies on Zymomonas mobilis. However, despite its apparent advantages of higher yields and faster specific rates when compared to yeasts, no commercial scale fermentations currently exist which use Z. mobilis for the manufacture of fuel ethanol. This may change with the recent announcement of a Dupont/Broin partnership to develop a process for conversion of lignocellulosic residues, such as corn stover, to fuel ethanol using recombinant strains of Z. mobilis. The research leading to the construction of these strains, and their fermentation characteristics, are described in the present review. The review also addresses opportunities offered by Z. mobilis for higher value products through its metabolic engineering and use of specific high activity enzymes.

  17. Measuring Stratigraphic Congruence Across Trees, Higher Taxa, and Time.

    Science.gov (United States)

    O'Connor, Anne; Wills, Matthew A

    2016-09-01

    The congruence between the order of cladistic branching and the first appearance dates of fossil lineages can be quantified using a variety of indices. Good matching is a prerequisite for the accurate time calibration of trees, while the distribution of congruence indices across large samples of cladograms has underpinned claims about temporal and taxonomic patterns of completeness in the fossil record. The most widely used stratigraphic congruence indices are the stratigraphic consistency index (SCI), the modified Manhattan stratigraphic measure (MSM*), and the gap excess ratio (GER) (plus its derivatives; the topological GER and the modified GER). Many factors are believed to variously bias these indices, with several empirical and simulation studies addressing some subset of the putative interactions. This study combines both approaches to quantify the effects (on all five indices) of eight variables reasoned to constrain the distribution of possible values (the number of taxa, tree balance, tree resolution, range of first occurrence (FO) dates, center of gravity of FO dates, the variability of FO dates, percentage of extant taxa, and percentage of taxa with no fossil record). Our empirical data set comprised 647 published animal and plant cladograms spanning the entire Phanerozoic, and for these data we also modeled the effects of mean age of FOs (as a proxy for clade age), the taxonomic rank of the clade, and the higher taxonomic group to which it belonged. The center of gravity of FO dates had not been investigated hitherto, and this was found to correlate most strongly with some measures of stratigraphic congruence in our empirical study (top-heavy clades had better congruence). The modified GER was the index least susceptible to bias. We found significant differences across higher taxa for all indices; arthropods had lower congruence and tetrapods higher congruence. Stratigraphic congruence-however measured-also varied throughout the Phanerozoic, reflecting

  18. A stable higher order space time Galerkin marching-on-in-time scheme

    KAUST Repository

    Pray, Andrew J.; Shanker, Balasubramaniam; Bagci, Hakan

    2013-01-01

    We present a method for the stable solution of time-domain integral equations. The method uses a technique developed in [1] to accurately evaluate matrix elements. As opposed to existing stabilization schemes, the method presented uses higher order

  19. Worker's perceptions of time, time-use-attitudes and productivity

    OpenAIRE

    E. Ben-Baruch; C. P. H. Myburgh; E. C. Anderssen

    1991-01-01

    Decreasing productivity and increasing wage demands are singled out as being crucial problems facing the economy of South Africa. Changes in the time perceptions and time-use-attitudes of workers could play a decisive role in increasing productivity. The relationships between time perception, needs, motivation and productivity are analysed. Culture, tradition, economy, and environment lend a specific significance to these variables. Workers in a technological society should be guided to adapt...

  20. A higher order space-time Galerkin scheme for time domain integral equations

    KAUST Repository

    Pray, Andrew J.; Beghein, Yves; Nair, Naveen V.; Cools, Kristof; Bagci, Hakan; Shanker, Balasubramaniam

    2014-01-01

    Stability of time domain integral equation (TDIE) solvers has remained an elusive goal formany years. Advancement of this research has largely progressed on four fronts: 1) Exact integration, 2) Lubich quadrature, 3) smooth temporal basis functions, and 4) space-time separation of convolutions with the retarded potential. The latter method's efficacy in stabilizing solutions to the time domain electric field integral equation (TD-EFIE) was previously reported for first-order surface descriptions (flat elements) and zeroth-order functions as the temporal basis. In this work, we develop the methodology necessary to extend the scheme to higher order surface descriptions as well as to enable its use with higher order basis functions in both space and time. These basis functions are then used in a space-time Galerkin framework. A number of results are presented that demonstrate convergence in time. The viability of the space-time separation method in producing stable results is demonstrated experimentally for these examples.

  1. A stable higher order space time Galerkin marching-on-in-time scheme

    KAUST Repository

    Pray, Andrew J.

    2013-07-01

    We present a method for the stable solution of time-domain integral equations. The method uses a technique developed in [1] to accurately evaluate matrix elements. As opposed to existing stabilization schemes, the method presented uses higher order basis functions in time to improve the accuracy of the solver. The method is validated by showing convergence in temporal basis function order, time step size, and geometric discretization order. © 2013 IEEE.

  2. Black hole production in particle collisions and higher curvature gravity

    International Nuclear Information System (INIS)

    Rychkov, Vyacheslav S.

    2004-01-01

    The problem of black hole production in trans-Planckian particle collisions is revisited, in the context of large extra dimensions scenarios of TeV-scale gravity. The validity of the standard description of this process (two colliding Aichelburg-Sexl shock waves in classical Einstein gravity) is questioned. It is observed that the classical spacetime has large curvature along the transverse collision plane, as signaled by the curvature invariant (R μνλσ ) 2 . Thus quantum gravity effects, and in particular higher curvature corrections to the Einstein gravity, cannot be ignored. To give a specific example of what may happen, the collision is reanalyzed in the Einstein-Lanczos-Lovelock gravity theory, which modifies the Einstein-Hilbert Lagrangian by adding a particular 'Gauss-Bonnet' combination of curvature squared terms. The analysis uses a series of approximations, which reduce the field equations to a tractable second order nonlinear PDE of the Monge-Ampere type. It is found that the resulting spacetime is significantly different from the pure Einstein case in the future of the transverse collision plane. These considerations cast serious doubts on the geometric cross section estimate, which is based on the classical Einstein gravity description of the black hole production process

  3. Ecuador's Higher Education System in Times of Change

    Science.gov (United States)

    Van Hoof, Hubert B.; Estrella, Mateo; Eljuri, Marie-Isabel; León, Leonardo Torres

    2013-01-01

    Ecuador's higher education system is undergoing dramatic changes. The National Constitution of 2008 and the Higher Education Law of 2010 have changed the way Ecuador's universities are funded, administered, and accredited. The importance of research was elevated and drastic changes were made to the academic qualifications and employment conditions…

  4. Time Management and Academic Achievement of Higher Secondary Students

    Science.gov (United States)

    Cyril, A. Vences

    2015-01-01

    The only thing, which can't be changed by man, is time. One cannot get back time lost or gone Nothing can be substituted for time. Time management is actually self management. The skills that people need to manage others are the same skills that are required to manage themselves. The purpose of the present study was to explore the relation between…

  5. Restyling the Humanities Curriculum of Higher Education for Posthuman Times

    Science.gov (United States)

    Siddiqui, Jamila R.

    2016-01-01

    The future viability of the humanities in higher education has been broadly debated. Yet, most of these debates are missing an important consideration. The humanities' object of study is the human, an object that some would argue has been replaced in our onto-epistemological systems by the posthuman. In her 2013 book, "The Posthuman,"…

  6. Rebooting Irish Higher Education: Policy Challenges for Challenging Times

    Science.gov (United States)

    Hazelkorn, Ellen

    2014-01-01

    The 2008 global financial crisis cast a long shadow over Ireland's higher education and research system. The IMF said Ireland experienced an "unprecedented economic correction", while Ireland's National Economic and Social Development Office said Ireland was beset by five different crises: a banking crisis, a fiscal crisis, an economic…

  7. Higher Education in Times of Financial Distress: The Minnesota Experience

    Science.gov (United States)

    Severns, Roger

    2012-01-01

    Like many states, Minnesota has incurred large budget deficits during the past two years. Those deficits have, in turn, led to changes in a number of areas of state government, particularly higher education. Faculty have incurred pay freezes and layoffs, programs have closed, and tuition increased. Campuses within the MnSCU system have been…

  8. Money counts for a Times Higher Education top-rank

    NARCIS (Netherlands)

    Marconi, G.; Ritzen, J.M.M.

    2014-01-01

    This paper analyses the relationship between a university’s expenditure per student and its position in international university rankings. We take into account other factors that are expected to play a role, such as university mission, size, and productive inefficiency. We formalise these concepts

  9. Learning and Teaching Problems in Part-Time Higher Education.

    Science.gov (United States)

    Trotman-Dickenson, D. I.

    1988-01-01

    Results of a British survey of the administrations of six universities and six public colleges, employers, and employees who were part-time students are reported and discussed. The survey assessed the perceptions of those groups concerning problems in the instruction and learning of part-time students. (MSE)

  10. A higher order space-time Galerkin scheme for time domain integral equations

    KAUST Repository

    Pray, Andrew J.

    2014-12-01

    Stability of time domain integral equation (TDIE) solvers has remained an elusive goal formany years. Advancement of this research has largely progressed on four fronts: 1) Exact integration, 2) Lubich quadrature, 3) smooth temporal basis functions, and 4) space-time separation of convolutions with the retarded potential. The latter method\\'s efficacy in stabilizing solutions to the time domain electric field integral equation (TD-EFIE) was previously reported for first-order surface descriptions (flat elements) and zeroth-order functions as the temporal basis. In this work, we develop the methodology necessary to extend the scheme to higher order surface descriptions as well as to enable its use with higher order basis functions in both space and time. These basis functions are then used in a space-time Galerkin framework. A number of results are presented that demonstrate convergence in time. The viability of the space-time separation method in producing stable results is demonstrated experimentally for these examples.

  11. Higher time derivatives of the generalized Liapunov function

    International Nuclear Information System (INIS)

    Schieve, W.C.; Bulsara, A.R.

    1975-01-01

    Using the generalized N-body expression for a Liapunov functional developed by Prigogine and coworkers, a condition is obtained whereby the successive time derivatives of this function alternate in sign for weakly coupled systems. This generalized Liapunov function contains contributions from the diagonal as well as off-diagonal (correlation) components of the density matrix. The alternating sign condition is applied (and seen to hold true) for the cases of elastic phonon scattering in a lattice, three-phonon scattering (the anharmonic lattice), and the quantum electron gas. It is also proved simply for the Friedrichs model

  12. Clinical research in dermatology: resources and activities associated with a higher scientific productivity.

    Science.gov (United States)

    Molina-Leyva, Alejandro; Descalzo, Miguel A; García-Doval, Ignacio

    2018-03-06

    Clinical research papers and their derived metrics can be useful to assess the scientific production of medical and research centers. Diverse factors are probably associated to differences in scientific production. But there are scarce studies analyzing them. Resources are limited and have to be distributed efficiently. The objective of this study is to explore what resources and activities are potentially associated with a higher scientific productivity. A bibliometric study was performed to obtain information about scientific productivity. Papers included had to meet criteria to be considered clinical research in dermatology, additionally had to be published between the years 2005-2014, had to be included in Pubmed or Embase and had to include a Spanish center of dermatology as the correspondence address. Information about research resources and activities of the year 2015 was gathered by means of an online survey sent to the authors identified in the bibliometric study. The search strategy returned 8617 papers and only 1104 of them (12.81%) met the inclusion criteria. 63 out of 113 centers responded to the survey (55.75%). Factors associated with a higher scientific productivity were: the size of the resident program, the amount of time specifically dedicated to research, a lower clinical workload, and the number of clinical trials performed in the last year. We have demonstrated that some factors are associated with a higher scientific productivity. Residency program, more research staff, clinical workload redistribution and research motivation/initiatives are key strategies that could improve scientific productivity of a center.

  13. Spatial support of knowledge production in higher education

    OpenAIRE

    Groen, B.H. (Brenda); Sprang, van, H. (Hester); Voordt, van der, T.J.M. (Theo)

    2014-01-01

    This paper explores the impact of the physical and social dimensions of the work environment on  satisfaction and perceived productivity of knowledge workers in Dutch universities of applied sciences. The approach took the form of a literature review, multiple case study of six research centres using interviews and logbook analysis, and web-based survey (N = 188). Optimally facilitating knowledge production requires both space for concentration (to support internalisation of knowledge) a...

  14. Spatial support of knowlegde production in higher education

    OpenAIRE

    Groen, B. (Brenda); Sprang, van, H. (Hester); Voordt, van der, T.J.M. (Theo)

    2013-01-01

    This paper explores the impact of the physical and social dimensions of the work environment on satisfaction and perceived productivity of knowledge workers in Dutch universities of applied sciences. The approach took the form of a literature review, multiple case study of six research centres using interviews and logbook analysis, and web-based survey (N = 188). Optimally facilitating knowledge production requires both space for concentration (to support internalisation of knowledge) and spa...

  15. Spatial support of knowledge production in higher education: Research paper

    OpenAIRE

    van Sprang, H; Groen, BH; van der Voordt, Theo

    2013-01-01

    This paper explores the impact of the physical and social dimensions of the work environment on satisfaction and perceived productivity of knowledge workers in Dutch universities of applied sciences. The approach took the form of a literature review, multiple case study of six research centres using interviews and logbook analysis, and web-based survey (N = 188). Optimally facilitating knowledge production requires both space for concentration (to support internalisation of knowledge) and spa...

  16. Strategies for academic leadership towards increasing productivity in higher education institutions; business education case

    Directory of Open Access Journals (Sweden)

    Iordache-Platis Magdalena

    2017-07-01

    Full Text Available Higher education institutions face a lot of challenges in the contemporary context. Labour market is s strict evaluator of the graduates’ competences and skills and thus, of the study programmes. An attractive university is a university with a large demand for studies, with many partners and projects, with a high visibility at national and international level, with a considerable research production. At present, the lack of resources characterizes the difficult situation for decision making process which is a real challenge for the academic leadership. On one hand, the competiton requires the need of continuous development and of differentiation strategy while on the other hand, insufficient financial, human, material, informational resources, including time as a specific restriction generate huge opportunities and threats for institutions. Possibilities of being efficient are to be explored. The aim of this paper is to explore possible strategies to increase productivity in higher education institutions. Main objectives of the study are the following: a. to define productivity in higher education institutions, on the basis of the academics’ perceptions, as well as of students’ perceptions; b. to provide a diagnosis of the current state of the prductivity in higher education institutions; c. to contribute to new clarifications on leadership strategies for increasing productivity in higher education institutions. Based on the literature review, the paper reveal proper answers to questions, such as: what is productivity, how is it measured, what is its impact, which are the increasing possibilities in business context. The study methodology is also based on a questionnaire dedicated to the two groups of respondents – academics and students. Their perceptions are then compared in order to reveal the common view. Main output of the research include: a. A new conceptual clarification for the productivity in higher education institutions; b. A

  17. Time management strategies for research productivity.

    Science.gov (United States)

    Chase, Jo-Ana D; Topp, Robert; Smith, Carol E; Cohen, Marlene Z; Fahrenwald, Nancy; Zerwic, Julie J; Benefield, Lazelle E; Anderson, Cindy M; Conn, Vicki S

    2013-02-01

    Researchers function in a complex environment and carry multiple role responsibilities. This environment is prone to various distractions that can derail productivity and decrease efficiency. Effective time management allows researchers to maintain focus on their work, contributing to research productivity. Thus, improving time management skills is essential to developing and sustaining a successful program of research. This article presents time management strategies addressing behaviors surrounding time assessment, planning, and monitoring. Herein, the Western Journal of Nursing Research editorial board recommends strategies to enhance time management, including setting realistic goals, prioritizing, and optimizing planning. Involving a team, problem-solving barriers, and early management of potential distractions can facilitate maintaining focus on a research program. Continually evaluating the effectiveness of time management strategies allows researchers to identify areas of improvement and recognize progress.

  18. Spatial support of knowledge production in higher education

    NARCIS (Netherlands)

    Groen, B.H. (Brenda); Sprang, van H. (Hester); Voordt, van der T.J.M. (Theo)

    2014-01-01

    This paper explores the impact of the physical and social dimensions of the work environment on  satisfaction and perceived productivity of knowledge workers in Dutch universities of applied sciences. The approach took the form of a literature review, multiple case study of six research centres

  19. Spatial support of knowledge production in higher education : Research paper

    NARCIS (Netherlands)

    van Sprang, H; Groen, BH; van der Voordt, Theo

    2013-01-01

    This paper explores the impact of the physical and social dimensions of the work environment on satisfaction and perceived productivity of knowledge workers in Dutch universities of applied sciences. The approach took the form of a literature review, multiple case study of six research centres using

  20. Spatial support of knowlegde production in higher education

    NARCIS (Netherlands)

    Groen, B. (Brenda); Sprang, van H. (Hester); Voordt, van der T.J.M. (Theo)

    2013-01-01

    This paper explores the impact of the physical and social dimensions of the work environment on satisfaction and perceived productivity of knowledge workers in Dutch universities of applied sciences. The approach took the form of a literature review, multiple case study of six research centres

  1. Research Productivity and Social Capital in Australian Higher Education

    Science.gov (United States)

    Salaran, Mohammad

    2010-01-01

    This study investigates the role of social capital in raising research productivity in academic institutions. Social capital as a strategic resource embedded in social relationships can be utilised towards decreasing pressures from external environmental conditions, such as the global financial crisis. A survey was sent to academic staff in five…

  2. Higher order Bose-Einstein correlations in identical particle production

    International Nuclear Information System (INIS)

    Biyajima, M.

    1990-01-01

    A diagram technique to calculate the higher order Bose-Einstein correlations is formulated. This technique is applied to derive explicit expressions for the n-pion correlation functions for n = 2, 3, 4, and 5, and numerical predictions are given. In a comparison with the AFS and NA23 data on two-pion and three-pion Bose-Einstein correlations good agreement is obtained. 21 refs., 5 figs. (Authors)

  3. Wyoming uranium miners set sights on higher production

    International Nuclear Information System (INIS)

    White, L.

    1975-01-01

    The rising price of U 3 O 8 due to current shortage of supply and stiff environmental regulations on the uranium mining serve as grounds for caution in assessing the future of the uranium industry. Some projections of the need for doubled uranium production in the next 5 years have sparked much exploration and mining in Wyoming. Currently working or near-working mining operations are discussed briefly. The discussions are divided as to the company carrying out the operation-- from Exxon to small drilling contractors

  4. Productivity as an Indication of Quality in Higher Education: The Views of Employed Graduates in Greece

    Science.gov (United States)

    Eliophotou Menon, Maria

    2016-01-01

    The paper investigates the views of Greek university graduates on the link between higher education and productivity in order to determine the extent to which productivity can be considered to be an indication of quality in higher education. It also investigates the perceived effect of the type and content of higher education on productivity;…

  5. Worker's perceptions of time, time-use-attitudes and productivity

    Directory of Open Access Journals (Sweden)

    E. Ben-Baruch

    1991-06-01

    Full Text Available Decreasing productivity and increasing wage demands are singled out as being crucial problems facing the economy of South Africa. Changes in the time perceptions and time-use-attitudes of workers could play a decisive role in increasing productivity. The relationships between time perception, needs, motivation and productivity are analysed. Culture, tradition, economy, and environment lend a specific significance to these variables. Workers in a technological society should be guided to adapt to and live by the value system needed to uphold productivity. Opsomming Voortdurende afnemende produktiwiteit teenoor looneise wat styg, is een van die kritieke probleme waarmee die Suid-Afrikaanse ekonomie gekonfronteer word. Die verandering van werkers se tydpersepsie en verandering van houdinge teenoor die benutting van tyd kan deurslaggewend in die verhoging van produktiwiteit wees. In die lig hiervan is die verwantskap tussen tydpersepsie, behoeftes, motivering en prodrktiwiteit ondersoek. In die ontleding word aandag geskenk aan die invloed wat kultuur, tradisie, ekonomie en die omgewing op hierdie veranderlikes het. Opieiding in 'n tegnologiese samelewmg behoort daarop gerig te wees om 'n waardesisteem by werkers te laat ontwikkel wat produktiwiteit kan bevorder.

  6. Highly reconfigurable production systems controlled by real-time agents

    OpenAIRE

    Schütz, D.;Schraufstetter, M.;Folmer, J.;Vogel-Heuser, B.;Gmeiner, T.;Shea, K.

    2017-01-01

    Flexible plant components can significantly increase the flexibility of manufacturing systems and enable concepts like mass-customized production. This paper presents an approach for production planning and execution for flexible manufacturing system components, based on software agents. The agents are implemented directly on a PLC, making them capable of real-time operation. Additionally, a service-interface contributes to the vertical integration of the approach into the higher level planni...

  7. Time-ordered products and Schwinger functions

    International Nuclear Information System (INIS)

    Eckmann, J.P.; Epstein, H.

    1979-01-01

    It is shown that every system of time-ordered products for a local field theory determines a related system of Schwinger functions possessing an extended form of Osterwalder-Schrader positivity and that the converse is true provided certain growth conditions are satisfied. This is applied to the phi 3 4 theory and it is shown that the time-ordered functions and S-matrix elements admit the standard perturbation series as asymptotic expansions. (orig.) [de

  8. Euclidean scalar Green function in a higher dimensional global monopole space-time

    International Nuclear Information System (INIS)

    Bezerra de Mello, E.R.

    2002-01-01

    We construct the explicit Euclidean scalar Green function associated with a massless field in a higher dimensional global monopole space-time, i.e., a (1+d)-space-time with d≥3 which presents a solid angle deficit. Our result is expressed in terms of an infinite sum of products of Legendre functions with Gegenbauer polynomials. Although this Green function cannot be expressed in a closed form, for the specific case where the solid angle deficit is very small, it is possible to develop the sum and obtain the Green function in a more workable expression. Having this expression it is possible to calculate the vacuum expectation value of some relevant operators. As an application of this formalism, we calculate the renormalized vacuum expectation value of the square of the scalar field, 2 (x)> Ren , and the energy-momentum tensor, μν (x)> Ren , for the global monopole space-time with spatial dimensions d=4 and d=5

  9. Production, staff, working time and financial planning

    Directory of Open Access Journals (Sweden)

    Orlando Boiteux

    2009-07-01

    Full Text Available Aggregate planning can be a tool for coordinating the tactical decisions belonging to some functional areas of a company. This potential has been limited due to methodological and technical reasons, but nowadays it is possible to solve very sophisticated models integrating, with a high level of detail, a great number of decisions of several functional areas and that permit to include new management schemes. In this paper, a production, staff, working time and cash management model is introduced.

  10. Public Policies, Prices, and Productivity in American Higher Education. Stretching the Higher Education Dollar. Special Report 3

    Science.gov (United States)

    Hauptman, Arthur M.

    2013-01-01

    Rapid increases in what colleges charge and what they spend per student have been and remain one of the most controversial aspects of American higher education. Tuition, fees, and other college charges have increased in both the public and private sectors at more than twice the rate of inflation for over a quarter century. Trends over time in what…

  11. Star-product functions in higher-spin theory and locality

    Energy Technology Data Exchange (ETDEWEB)

    Vasiliev, M.A. [I.E. Tamm Department of Theoretical Physics, Lebedev Physical Institute,Leninsky prospect 53, 119991, Moscow (Russian Federation)

    2015-06-04

    Properties of the functional classes of star-product elements associated with higher-spin gauge fields and gauge parameters are elaborated. Cohomological interpretation of the nonlinear higher-spin equations is given. An algebra ℋ, where solutions of the nonlinear higher-spin equations are valued, is found. A conjecture on the classes of star-product functions underlying (non)local maps and gauge transformations in the nonlinear higher-spin theory is proposed.

  12. Part-Time Higher Education in English Colleges: Adult Identities in Diminishing Spaces

    Science.gov (United States)

    Esmond, Bill

    2015-01-01

    Adult participation in higher education has frequently entailed mature students studying part time in lower-ranked institutions. In England, higher education policies have increasingly emphasised higher education provision in vocational further education colleges, settings which have extensive adult traditions but which mainly teach…

  13. Time as the Fourth Dimension in the Globalization of Higher Education

    Science.gov (United States)

    Walker, Judith

    2009-01-01

    This paper calls for an analysis of time to be integrated into the theories on the globalization of higher education. Specifically, the author argues that academic capitalism, fuelled by globalization, has led to changes in the university visible in time/space compression, time acceleration, the reification of time and our internalization of the…

  14. The Benefits of Part-Time Undergraduate Study and UK Higher Education Policy: A Literature Review

    Science.gov (United States)

    Bennion, Alice; Scesa, Anna; Williams, Ruth

    2011-01-01

    Part-time study in the UK is significant: nearly 40 per cent of higher education students study part-time. This article reports on a literature review that sought to understand the economic and social benefits of part-time study in the UK. It concludes that there are substantial and wide-ranging benefits from studying part-time. The article also…

  15. Buying higher welfare poultry products? Profiling Flemish consumers who do and do not.

    Science.gov (United States)

    Vanhonacker, F; Verbeke, W

    2009-12-01

    A substantial number of studies has already investigated differences within the consumer market with regard to attitudes and perceptions in relation to farm animal welfare. Likewise, several studies focused on the gap that exists between positive attitudes and reported consumption or purchase intentions for sustainable food products in general and higher welfare products more specific, and on the factors influencing this attitude-behavior gap. Little or no studies, however, have started from reported pro-welfare behavior to distinguish between consumer groups and to explore the motivations of the respective behavior. With this study, we aim to group consumers according to their reported buying frequency of higher welfare eggs and higher welfare chicken meat. Similarities and dissimilarities between these groups are mapped in terms of individual characteristics, product attribute importance, perceived consumer effectiveness, perception of higher welfare products, and attitude toward a welfare label. The research methodology applied was a quantitative study with cross-sectional consumer survey data collected in Flanders in spring 2007 (n = 469). Pro-welfare behavior was unevenly distributed across different consumer segments, despite a general interest and concern for bird welfare. A consistent choice for standard (no welfare premium) poultry products was related to strong perceived price and availability barriers, to a low importance attached to ethical issues as product attributes, and to a low perceived consumer effectiveness. A consistent choice for products with higher welfare standards to the contrast associated with a high importance attached to ethical issues; a low effect of price and availability perception; a strong association of higher welfare products with product attributes like health, taste, and quality; and a high perceived consumer effectiveness. The identification of market segments with common characteristics is essential for positioning higher

  16. Improving productivity through more effective time management.

    Science.gov (United States)

    Arnold, Edwin; Pulich, Marcia

    2004-01-01

    Effective time management has become increasingly important for managers as they seek to accomplish objectives in today's organizations, which have been restructured for efficiency while employing fewer people. Managers can improve their ability to manage time effectively by examining their attitudes toward time, analyzing time-wasting behaviors, and developing better time management skills. Managers can improve their performance and promotion potential with more effective time utilization. Strategies for improving time management skills are presented.

  17. "The Balancing Act"--Irish Part-Time Undergraduate Students in Higher Education

    Science.gov (United States)

    Darmody, Merike; Fleming, Bairbre

    2009-01-01

    While the numbers of part-time students has increased in higher education in Ireland, little is known about these students or about how they balance their study and other commitments. Drawing on a larger study on Irish students' experiences in higher education, this article attempts to address this gap in research and reports on Irish part-time…

  18. Higher Education Institution Leaders' Identity Constructions in Times of Changing Structures and Legislation

    Science.gov (United States)

    Tigerstedt, Christa

    2016-01-01

    The focus in this paper is on the leadership of higher education institutions (HEI) in Finland and more specifically on the rector's leadership. The higher education sector is undergoing many changes and has been so for a long time. How, then, do the current changes become visible from a leadership perspective? The leadership discourse is here…

  19. Educational productivity in higher education : An examination of part of the Walberg Educational Productivity Model

    NARCIS (Netherlands)

    Bruinsma, M.; Jansen, E. P. W. A.

    Several factors in the H. J. Walberg Educational Productivity Model, which assumes that 9 factors affect academic achievement, were examined with a limited sample of 1st-year students in the University of Groningen. Information concerning 8 of these factors - grades, motivation, age, prior

  20. The Supply of Part-Time Higher Education in the UK. Research Report

    Science.gov (United States)

    Callender, Claire; Birkbeck, Anne Jamieson; Mason, Geoff

    2010-01-01

    This report explores the supply of part-time higher education in the UK, with particular consideration to the study of part-time undergraduate provision in England. It is the final publication in the series of reports on individual student markets that were commissioned by Universities UK following the publication of the reports on the Future size…

  1. The Motivations and Outcomes of Studying for Part-Time Mature Students in Higher Education

    Science.gov (United States)

    Swain, Jon; Hammond, Cathie

    2011-01-01

    This paper examines the motivations and outcomes for mature students who study part-time in higher education (HE) in the UK. Although many students in HE are mature part-time learners, they have not been the specific focus of much research or policy interest. In-depth narrative interviews were carried out with 18 graduates who had studied…

  2. PRODUCTION OF HIGHER STRENGTH THIN WALLED GLOW DISCHARGE POLYMER SHELLS FOR CRYOGENIC EXPERIMENTS AT OMEGA

    International Nuclear Information System (INIS)

    NIKROO, A; CZECHOWICZ, DG; CASTILLO, ER; PONTELANDOLFO, JM

    2002-01-01

    OAK A271 PRODUCTION OF HIGHER STRENGTH THIN WALLED GLOW DISCHARGE POLYMER SHELLS FOR CRYOGENIC EXPERIMENTS AT OMEGA. Thin walled polymer shells are needed for OMEGA cryogenic laser experiments. These capsules need to be about 900 (micro)m in diameter and as thin as possible (approx 1-2 (micro)m), while having enough strength to be filled with DT as fast as possible to about 1000 atm. The authors have found that by optimizing the coating parameters in the glow discharge polymer (GDP) deposition system, traditionally used for making ICF targets, they can routinely make robust, ∼ 1.5 (micro)m thick, 900 (micro)m diameter GDP shells with buckle strengths of over 0.3 atm. This is twice the strength of shells made prior to the optimization and is comparable to values quoted for polyimide shells. In addition, these shells were found to be approximately three times more permeable and over 20% denser than previously made GDP shells. The combination of higher strength and permeability is ideal for direct drive cryogenic targets at OMEGA. Shells as thin as 0.5 (micro)m have been made. In this paper, the authors discuss the shell fabrication process, effects of modifying various GDP deposition parameters on shell properties and chemical composition

  3. Influence of dispatching rules on average production lead time for multi-stage production systems.

    Science.gov (United States)

    Hübl, Alexander; Jodlbauer, Herbert; Altendorfer, Klaus

    2013-08-01

    In this paper the influence of different dispatching rules on the average production lead time is investigated. Two theorems based on covariance between processing time and production lead time are formulated and proved theoretically. Theorem 1 links the average production lead time to the "processing time weighted production lead time" for the multi-stage production systems analytically. The influence of different dispatching rules on average lead time, which is well known from simulation and empirical studies, can be proved theoretically in Theorem 2 for a single stage production system. A simulation study is conducted to gain more insight into the influence of dispatching rules on average production lead time in a multi-stage production system. We find that the "processing time weighted average production lead time" for a multi-stage production system is not invariant of the applied dispatching rule and can be used as a dispatching rule independent indicator for single-stage production systems.

  4. Improving wheat productivity through source and timing of nitrogen fertilization

    International Nuclear Information System (INIS)

    Jan, M.T.; Khan, A.; Afridi, M.Z.; Arif, M.; Khan, M.J.; Farhatullah; Jan, D.; Saeed, M.

    2011-01-01

    Efficient nitrogen (N) fertilizer management is critical for the improved production of wheat (Triticum aestivum L.) and can be achieved through source and timing of N application. Thus, an experiment was carried out at the Research Farm of KPK Agricultural University Peshawar during 2005-06 to test the effects of sources and timing of N application on yield and yield components of wheat. Nitrogen sources were ammonium (NH/sub 4/) and nitrate (NO/sub 3/) applied at the rate of 100 kg ha/sup -1/ at three different stages i.e., at sowing (S1), tillering (S2) and boot stage (S3). Ammonium N increased yield component but did not affect the final grain yield. Split N application at sowing, tillering and boot stages had increased productive tillers m-2, and thousand grains weight, whereas grain yield was higher when N was applied at tillering and boot stages. Nitrogen fertilization increased 20% grain yield compared to control regardless of N application time. It was concluded from the experiment that split application of NH/sub 4/-N performed better than full dose application and/or NO/sub 3/-N for improved wheat productivity and thus, is recommended for general practice in agro-climatic conditions of Peshawar. (author)

  5. Worldviews and Quality in Higher Education: a dichotomy between productivity and social responsibility

    Directory of Open Access Journals (Sweden)

    Julio Bertolin

    2013-11-01

    Full Text Available This paper addresses and analyzes concepts that have been often used by important stakeholders to refer to challenges and to quality in higher education. The aim is to identify the conceptualizations of quality in higher education that underlie the use of different concepts such as efficiency and equity. Based on publications by important multilateral organizations, these terms are correlated with the conceptualizations of higher education and, at the political level, with two major contemporary socioeconomic models: neoliberalism and social welfare state. Finally, two ideological tendencies for the understanding of quality in higher education are presented: quality as productivity and quality as social responsibility.

  6. Detrended fluctuation analysis based on higher-order moments of financial time series

    Science.gov (United States)

    Teng, Yue; Shang, Pengjian

    2018-01-01

    In this paper, a generalized method of detrended fluctuation analysis (DFA) is proposed as a new measure to assess the complexity of a complex dynamical system such as stock market. We extend DFA and local scaling DFA to higher moments such as skewness and kurtosis (labeled SMDFA and KMDFA), so as to investigate the volatility scaling property of financial time series. Simulations are conducted over synthetic and financial data for providing the comparative study. We further report the results of volatility behaviors in three American countries, three Chinese and three European stock markets by using DFA and LSDFA method based on higher moments. They demonstrate the dynamics behaviors of time series in different aspects, which can quantify the changes of complexity for stock market data and provide us with more meaningful information than single exponent. And the results reveal some higher moments volatility and higher moments multiscale volatility details that cannot be obtained using the traditional DFA method.

  7. Production Planning with Load Dependent Lead Times

    DEFF Research Database (Denmark)

    Pahl, Julia

    2005-01-01

    Lead times impact the performance of the supply chain significantly. Although there is a large literature concerning queuing models for the analysis of the relationship between capacity utilization and lead times, and there is a substantial literature concerning control and order release policies...... that take lead times into consideration, there have been only few papers describing models at the aggregate planning level that recognize the relationship between the planned utilization of capacity and lead times. In this paper we provide an in-depth discussion of the state-of-the art in this literature......, with particular attention to those models that are appropriate at the aggregate planning level....

  8. Productivity effects of higher education human capital in selected countries of Sub-Saharan Africa

    Directory of Open Access Journals (Sweden)

    Koye Gerry Bokana

    2017-06-01

    Full Text Available This study aimed to analyse the productivity effects of higher education enrolment (HEE, higher education output (HEO and the associated productivity gap (GP on selected countries in Sub-Saharan Africa (SSA over the period between 1981 and 2014. It was hypothesized in the study that HEE and HEO had statistically significant positive impact on productivity in the selected sub-Saharan Africa countries over the stated period. Fixed effect Least Square Dummy Variable (LSDV and a robust version of System Generalized Methods of Moment (SYSGMM were adopted as model estimating techniques. Results from the LSDV model indicated that HEE had no statistically significant positive impact on productivity growth in the twenty-one SSA countries. This non-significance was corrected in the dynamic model, but with negative effects on the growth rate of total factor productivity (TFP. The study further compared the worldwide technological frontier with those of the SSA countries under investigation and discovered that countries like Gabon, Mauritius and Swaziland ranked high, while Burundi needs to improve on its productivity determinants. The major conclusion of this study is therefore that higher education human capital should be supported with strong policy implementation, as this can have a positive impact on productivity growth.

  9. EFFECTIVE SAVINGS IN PRODUCTION TIMES AND COST

    African Journals Online (AJOL)

    ES OBE

    lamination process itself [5,6,7]. The purpose of this work is to fully expose, by means of experimental data, the ... takes staff to laminate such work piece (in cases of handlay-up processes) and machines. (for resin injection .... The unfinished layer of mat being laminated usually result in laminate products with rough surfaces ...

  10. GENDERED CAREER PRODUCTIVITY AND SUCCESS IN ACADEMIA IN INDONESIA’S ISLAMIC HIGHER EDUCATION INSTITUTIONS

    Directory of Open Access Journals (Sweden)

    Nur Kholis

    2012-12-01

    Full Text Available Career advancement in Indonesian academia is nationally regulated. It, theoretically, provides equal opportunities for men and women to be productive and successful. The purpose of this study is to analyze gender effects on academic career productivity and success. Seven-hundred and fifty questionnaires were distributed randomly to eight Islamic Higher Education Institutions in seven provinces, from which 220 (Men = 57.7%, and Women = 42.3% respondents returned the questionnaires with an analyzable quality. Descriptive and multivariate analyses are employed for analyzing and presenting the results. The paper argues that women in Islamic Higher Education Institutions are less productive in terms of publications, hold lower academic rank and leadership positions, and earn significantly less than men. It further argues that Islamic Higher Education Institutions should provide specific empowerment for women by, for example, providing support for their continuing education, professional development, and career opportunities.

  11. Shorter Perceived Outpatient MRI Wait Times Associated With Higher Patient Satisfaction.

    Science.gov (United States)

    Holbrook, Anna; Glenn, Harold; Mahmood, Rabia; Cai, Qingpo; Kang, Jian; Duszak, Richard

    2016-05-01

    The aim of this study was to assess differences in perceived versus actual wait times among patients undergoing outpatient MRI examinations and to correlate those times with patient satisfaction. Over 15 weeks, 190 patients presenting for outpatient MR in a radiology department in which "patient experience" is one of the stated strategic priorities were asked to (1) estimate their wait times for various stages in the imaging process and (2) state their satisfaction with their imaging experience. Perceived times were compared with actual electronic time stamps. Perceived and actual times were compared and correlated with standardized satisfaction scores using Kendall τ correlation. The mean actual wait time between patient arrival and examination start was 53.4 ± 33.8 min, whereas patients perceived a mean wait time of 27.8 ± 23.1 min, a statistically significant underestimation of 25.6 min (P perceived wait times at all points during patient encounters were correlated with higher satisfaction scores (P perceived and actual wait times were both correlated with higher satisfaction scores. As satisfaction surveys play a larger role in an environment of metric transparency and value-based payments, better understanding of such factors will be increasingly important. Copyright © 2016 American College of Radiology. Published by Elsevier Inc. All rights reserved.

  12. Aquatic food production modules in bioregenerative life support systems based on higher plants

    Science.gov (United States)

    Bluem, V.; Paris, F.

    Most bioregenerative life support systems (BLSS) are based on gravitropic higher plants which exhibit growth and seed generation disturbances in microgravity. Even when used for a lunar or martian base the reduced gravity may induce a decreased productivity in comparison to Earth. Therefore, the implementation of aquatic biomass production modules in higher plant and/or hybrid BLSS may compensate for this and offer, in addition, the possibility to produce animal protein for human nutrition. It was shown on the SLS-89 and SLS-90 space shuttle missions with the C.E.B.A.S.-MINI MODULE that the edible non gravitropic rootless higher aquatic plant Ceratophyllum demeresum exhibits an undisturbed high biomass production rate in space and that the teleost fish species, Xiphophorus helleri, adapts rapidly to space conditions without loss of its normal reproductive functions. Based on these findings a series of ground-based aquatic food production systems were developed which are disposed for utilization in space. These are plant production bioreactors for the species mentioned above and another suitable candidate, the lemnacean (duckweed) species, Wolffia arrhiza. Moreover, combined intensive aquaculture systems with a closed food loop between herbivorous fishes and aquatic and land plants are being developed which may be suitable for integration into a BLSS of higher complexity.

  13. The peculiarities' study of higher education applicants' employment in pharmaceutical specialties of full-time training

    Directory of Open Access Journals (Sweden)

    A. A. Kotvitska

    2017-08-01

    Full Text Available Employment of applicants of pharmaceutical higher education has both positive and negative impact on the quality of educational services provided by institutions, especially in terms of knowledge and skills acquired by student. Objective is to study peculiarities of higher education employment, full-time training, and features driving them to conclude labor agreements. Materials and methods. During the study, we used juridical and comparative legal methods of analysis. Results. The study has defined the following features of the employment of applicants of higher education in the health care institutions, pharmaceutical enterprises and organizations. The current legislation provides the applicants of higher education enrolled in HEIs for full-time training with a right to make a free choice of the field of study, profession, type of occupation and work. The relationship developed between an applicant and higher education institutions are not to be regarded as an employment relationship. The working under the items of labor agreement for person who combine it with the full-time education is not a part or combination or sharing, and is considered the main place of job. Thus, it stipulates maintenance of records book of the employed worker according to the general procedure. An applicant of higher education has discretion to choose working hours (full- or part-time working day, full- or part-time working week with taking into consideration the HEIs schedule and only in the free time. When full-time operating in frameworks of collective agreement at enterprise, institution, or organization, having accounted peculiarities of operation, non-standardized working day for some positions can be set. The current legislation stipulates possibility of employment for persons without higher pharmaceutical education to the health care institutions on the clearly defined positions. Conclusions.The country authority has created and is providing favorable

  14. Gendered Career Productivity and Success in Academia in Indonesia's Islamic Higher Education Institutions

    OpenAIRE

    Kholis, Nur

    2012-01-01

    Career advancement in Indonesian academia is nationally regulated. It, theoretically, provides equal opportunities for men and women to be productive and successful. The purpose of this study is to analyze gender effects on academic career productivity and success. Seven-hundred and fifty questionnaires were distributed randomly to eight Islamic Higher Education Institutions in seven provinces, from which 220 (Men = 57.7%, and Women = 42.3%) respondents returned the questionnaires with an ana...

  15. A Linear-Elasticity Solver for Higher-Order Space-Time Mesh Deformation

    Science.gov (United States)

    Diosady, Laslo T.; Murman, Scott M.

    2018-01-01

    A linear-elasticity approach is presented for the generation of meshes appropriate for a higher-order space-time discontinuous finite-element method. The equations of linear-elasticity are discretized using a higher-order, spatially-continuous, finite-element method. Given an initial finite-element mesh, and a specified boundary displacement, we solve for the mesh displacements to obtain a higher-order curvilinear mesh. Alternatively, for moving-domain problems we use the linear-elasticity approach to solve for a temporally discontinuous mesh velocity on each time-slab and recover a continuous mesh deformation by integrating the velocity. The applicability of this methodology is presented for several benchmark test cases.

  16. "Times Higher Education" 100 under 50 Ranking: Old Wine in a New Bottle?

    Science.gov (United States)

    Soh, Kaycheng

    2013-01-01

    "Times Higher Education" 100 under 50 ranking is a new twist to the university ranking. It focuses on universities that have a history of 50 years or less with the purpose of offsetting the advantage of prestige of the older ones. This article re-analysed the data publicly available and looked into relevant conceptual and statistical issues. The…

  17. Employers' Demand for and the Provision of Part-Time Higher Education for Employees.

    Science.gov (United States)

    Trotman-Dickenson, Danusia

    1987-01-01

    A study of public and private employers' demand for part-time higher education for their employees and the response of institutions is reported. The study focuses on Wales and on the regional economic and social trends affecting educational demand and supply. Improved communication between employers, employees, and institutions is recommended.…

  18. Higher order multi-term time-fractional partial differential equations involving Caputo-Fabrizio derivative

    Directory of Open Access Journals (Sweden)

    Erkinjon Karimov

    2017-10-01

    Full Text Available In this work we discuss higher order multi-term partial differential equation (PDE with the Caputo-Fabrizio fractional derivative in time. Using method of separation of variables, we reduce fractional order partial differential equation to the integer order. We represent explicit solution of formulated problem in particular case by Fourier series.

  19. Higher order multi-term time-fractional partial differential equations involving Caputo-Fabrizio derivative

    OpenAIRE

    Erkinjon Karimov; Sardor Pirnafasov

    2017-01-01

    In this work we discuss higher order multi-term partial differential equation (PDE) with the Caputo-Fabrizio fractional derivative in time. Using method of separation of variables, we reduce fractional order partial differential equation to the integer order. We represent explicit solution of formulated problem in particular case by Fourier series.

  20. Quality & timely delivery of products and services

    Energy Technology Data Exchange (ETDEWEB)

    Scott, K.; Shabbir, K. [WorleyParsons, Toronto, ON (Canada)

    2015-07-01

    This paper discusses quality and timely delivery of services. The approach is to support our customers, to ensure quality, schedule and cost predictability with no compromise to safety, to avoid optimistic project schedules and conservative cost estimates. It is important to maintain a strategic focus in helping to improve the customer's assets and improve the methodology to improve assets.

  1. Quality & timely delivery of products and services

    International Nuclear Information System (INIS)

    Scott, K.; Shabbir, K.

    2015-01-01

    This paper discusses quality and timely delivery of services. The approach is to support our customers, to ensure quality, schedule and cost predictability with no compromise to safety, to avoid optimistic project schedules and conservative cost estimates. It is important to maintain a strategic focus in helping to improve the customer's assets and improve the methodology to improve assets.

  2. Improving employee productivity through work engagement: Evidence from higher education sector

    Directory of Open Access Journals (Sweden)

    Jalal Hanaysha

    2016-01-01

    Full Text Available Employee productivity is one of the important management topics that received significant research attentions from several scholars and considered as a primary mechanism to enhance organizational success. Knowing what are the key factors that influence productivity is vital to ensure long term performance. This study examines the effect of work engagement on employee productivity in higher education sector. To accomplish this purpose, the primary data using survey instrument were collected from a sample of 242 employees at public universities in northern Malaysia using an online survey method. The collected data was analyzed using SPSS and Structural equation modelling on AMOS. The results indicated that work engagement had significant positive effect on employee productivity. Moreover, this study provides an evidence that all of the dimensions of work engagement namely vigor, dedication, and absorption have significant positive effects on employee productivity.

  3. TIME MANAGEMENT - AN INSTRUMENT TO IMPROVE PRODUCTIVITY

    Directory of Open Access Journals (Sweden)

    Johan Nortje

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: TIME is an Important element in any persons life as a plannlng mechanlsm to meaningfully organIse activities, or to ensure that a oroject runs WIth but also as a generator of destructive forces over it is lost. In the process of growth and progress ln a dynamIC everchanging envIronment. tIme not only becomes dearer to management, but also $carcet-, and an era of "time poverty" is experienced by many. A varIety of uncontrollable factors may be the cause of such problems, but a danger eXIsts that those factors over which control may be exercised could be lost within the uncontrol labie ones. The objective of this artIcle on tIme management is then to assist in identIfying those "barriers" which lead to "time pover'ty", how to avoid and prevent tIme wastage and apply methods, and make use of ways to promote the effective use of tIme.

    AFRIKAANSE OPSOMMING: TYD is 'n belangrlke faktor In dIe lewe van dIe mens enersyds dlen dlt as 'n beplannlngsmeganlsme am jOU daaglikse aktiwitelte slnvol te orden of am 'n pro.lek met preS1Sle te laat verloop, maar andersvds kan dlt ook vernietigende kragte genereer lndlen 'n mens daaroor beheer verloor. In die proses van groel en voorultgang In 'n dinamles veranderende omgewlng, raak dIe tyd van bestuur nle aIleen kosbaarder n ie, maarook skaar'ser en 'n era van' tydarmoede' word deur ba i e ervaar·. ' n Verskel denhe 1d van onbehee rbare faktore mag hiervoor verantwoordeilk wees, maar dIe gevaar bestaan dat die mens dle greep op dIe beheerbare faktore mag verloor. Die DOEL met hierdle artlkel oor tydsbestuur IS jU1S om behulpsaam te wees met dIe ldentiflsering van "slaggate" wat tot'tydat-moede" aanlelding gee. hoe am tydverkwlstlng te voorkom of te hanteer en die toepassing van metodes en gebruik van hulpmiddels om effektiewe tydsbestuur te bevorder.

  4. Productization and Commercialization of IT-Enabled Higher Education in Computer Science: A Systematic Literature Review

    Science.gov (United States)

    Kankaanpää, Irja; Isomäki, Hannakaisa

    2013-01-01

    This paper reviews research literature on the production and commercialization of IT-enabled higher education in computer science. Systematic literature review (SLR) was carried out in order to find out to what extent this area has been studied, more specifically how much it has been studied and to what detail. The results of this paper make a…

  5. Higher-order QCD corrections to inclusive particle production in panti p collisions

    International Nuclear Information System (INIS)

    Borzumati, F.M.; Kniehl, B.A.; Kramer, G.

    1992-10-01

    Inclusive single-particle production cross sections have been calculated including higher-order QCD corrections. Transverse-momentum and rapidity distributions are presented and the scale dependence is studied. The results are compared with experimental data from the CERN Spanti pS Collider and the Fermilab Tevatron. (orig.)

  6. Resistances to Scientific Knowledge Production of Comparative Measurements of Dropout and Completion in European Higher Education

    Science.gov (United States)

    Carlhed, Carina

    2017-01-01

    The article is a critical sociological analysis of current transnational practices on creating comparable measurements of dropout and completion in higher education and the consequences for the conditions of scientific knowledge production on the topic. The analysis revolves around questions of epistemological, methodological and symbolic types…

  7. The Impact of Higher Fixed Pay and Lower Bonuses on Productivity

    NARCIS (Netherlands)

    Bun, M.J.G.; Huberts, L.C.E.

    This study analyzes the effects of performance related pay on productivity exploiting a change in the payment structure of a large Dutch marketing company. Specifically, we investigate the consequences for company sales of higher fixed pay in combination with lower bonuses. Exploiting shift level

  8. Multi-Product Total Cost of Function for Higher Education: A Case of Bible Colleges.

    Science.gov (United States)

    Koshal, Rajindar K.; Koshal, Manjulika; Gupta, Ashok

    2001-01-01

    This study empirically estimates a multiproduct total cost function and output relationship for comprehensive U.S. universities. Statistical results for 184 Bible colleges suggest that there are both economies of scale and of scope in higher education. Additionally, product-specific economies of scope exist for all output levels and activities.…

  9. Time-discrete higher order ALE formulations: a priori error analysis

    KAUST Repository

    Bonito, Andrea

    2013-03-16

    We derive optimal a priori error estimates for discontinuous Galerkin (dG) time discrete schemes of any order applied to an advection-diffusion model defined on moving domains and written in the Arbitrary Lagrangian Eulerian (ALE) framework. Our estimates hold without any restrictions on the time steps for dG with exact integration or Reynolds\\' quadrature. They involve a mild restriction on the time steps for the practical Runge-Kutta-Radau methods of any order. The key ingredients are the stability results shown earlier in Bonito et al. (Time-discrete higher order ALE formulations: stability, 2013) along with a novel ALE projection. Numerical experiments illustrate and complement our theoretical results. © 2013 Springer-Verlag Berlin Heidelberg.

  10. Evidence for higher twist effects in fast π- production by antineutrinos in neon

    Science.gov (United States)

    Fitch, P. J.; Kasper, P.; Cooper-Sarkar, A. M.; Aderholz, M.; Armenise, N.; Azemoon, T.; Bertrand, D.; Berggren, M.; Bullock, F. W.; Calicchio, M.; Clayton, E. F.; Coghen, T.; Erriquez, O.; Gerbier, G.; Guy, J.; Hulth, P. O.; Iaselli, G.; Jones, G. T.; Lagraa, M.; Marage, P.; Middleton, R. P.; Miller, D.; Mobayyen, M. M.; Neveu, M.; O'Neale, S. W.; Parker, M. A.; Sansum, R. A.; Simopoulou, E.; Varvell, K.; Vallée, C.; Vayaki, A.; Venus, W.; Wachsmuth, H.; Wittek, W.; Wells, J.; Zevgolatakos, E.

    1986-03-01

    Evidence for a significant higher twist contribution to high z π- production in antineutrino scattering is presented. In events with W>3 GeV and Q 2>1 GeV2 in our data, it accounts for (51 ±8)% of all π- with z above 0.5. It is consistent with the z- Q 2 correlations of Berger's higher twist prediction. The data are inconclusive concerning the predicted y-z correlation and p T dependence. The z - Q 2 correlation is not adequately described by the Lund Monte-Carlo.

  11. Evidence for higher twist effects in fast π- production by antineutrinos in neon

    International Nuclear Information System (INIS)

    Fitch, P.J.; Azemoon, T.; Bullock, F.W.; Sansum, R.A.; Armenise, N.; Calicchio, M.; Erriquez, O.; Iaselli, G.; Bertrand, D.; Marage, P.; Berggren, M.; Hulth, P.O.; Coghen, T.; Gerbier, G.; Lagraa, M.; Neveu, M.; Parker, M.A.; Wachsmuth, H.; Simopoulo, E.; Vayaki, A.; Zevgolatakos, E.; Varvell, K.; Wells, J.; Vallee, C.

    1986-01-01

    Evidence for a significant higher twist contribution to high zπ - production in antineutrino scattering is presented. In events with W>3 GeV and Q 2 >1 GeV 2 in our data, it accounts for (51+-8)% of all π - with z above 0.5. It is consistent with the z-Q 2 correlations of Berger's higher twist prediction. The data are inconclusive concerning the predicted y-z correlation and psub(T) dependence. The z-Q 2 correlation is not adequately described by the Lund Monte-Carlo. (orig.)

  12. Essential time management how to become more productive and effective

    CERN Document Server

    Hilder, Brett

    2011-01-01

    Time is a resource like any other. Using your time effectively can transform your personal productivity and determine your level of success. Moreover, it can change your level of job satisfaction and confidence.

  13. Heuristics for the Economic Production Quantity Problem under Restrictions on Production and Maintenance Time

    Directory of Open Access Journals (Sweden)

    Qi Xu

    2016-01-01

    Full Text Available This paper proposes an economic production quantity problem with the maximal production run time and minimal preventive maintenance time over a finite planning horizon. The objective is to find the efficient production and maintenance policy to minimize the total cost composed of production, maintenance, shortages, and holding costs under the restriction on the production run time and the preventive maintenance time. The production and maintenance decisions include the production and maintenance frequencies and the production run and the maintenance time. The variability and the boundedness of the production run and maintenance time make the problem difficult to solve. Two heuristic algorithms are developed using different techniques based on the optimal properties of the relaxed problem. The performance comparison between the two algorithms is illustrated by numerical examples. The numerical results show that, for the most part, there exists a heuristic algorithm which is more effective than the other.

  14. Production planning of a perishable product with lead time and non-stationary demand

    NARCIS (Netherlands)

    Pauls-Worm, K.G.J.; Haijema, R.; Hendrix, E.M.T.; Rossi, R.; Vorst, van der J.G.A.J.

    2012-01-01

    We study a production planning problem for a perishable product with a fixed lifetime, under a service-level constraint. The product has a non-stationary stochastic demand. Food supply chains of fresh products like cheese and several crop products, are characterised by long lead times due to

  15. Increased Total Anesthetic Time Leads to Higher Rates of Surgical Site Infections in Spinal Fusions.

    Science.gov (United States)

    Puffer, Ross C; Murphy, Meghan; Maloney, Patrick; Kor, Daryl; Nassr, Ahmad; Freedman, Brett; Fogelson, Jeremy; Bydon, Mohamad

    2017-06-01

    A retrospective review of a consecutive series of spinal fusions comparing patient and procedural characteristics of patients who developed surgical site infections (SSIs) after spinal fusion. It is known that increased surgical time (incision to closure) is associated with a higher rate of postoperative SSIs. We sought to determine whether increased total anesthetic time (intubation to extubation) is a factor in the development of SSIs as well. In spine surgery for deformity and degenerative disease, SSI has been associated with operative time, revealing a nearly 10-fold increase in SSI rates in prolonged surgery. Surgical time is associated with infections in other surgical disciplines as well. No studies have reported whether total anesthetic time (intubation to extubation) has an association with SSIs. Surgical records were searched in a retrospective fashion to identify all spine fusion procedures performed between January 2010 and July 2012. All SSIs during that timeframe were recorded and compared with the list of cases performed between 2010 and 2012 in a case-control design. There were 20 (1.7%) SSIs in this fusion cohort. On univariate analyses of operative factors, there was a significant association between total anesthetic time (Infection 7.6 ± 0.5 hrs vs. no infection -6.0 ± 0.1 hrs, P operative time (infection 5.5 ± 0.4 hrs vs. no infection - 4.4 ± 0.06 hrs, P infections, whereas level of pathology and emergent surgery were not significant. On multivariate logistic analysis, BMI and total anesthetic time remained independent predictors of SSI whereas ASA status and operative time did not. Increasing BMI and total anesthetic time were independent predictors of SSIs in this cohort of over 1000 consecutive spinal fusions. 3.

  16. YAOPBM-II: extension to higher degrees and to shorter time series

    Energy Technology Data Exchange (ETDEWEB)

    Korzennik, S G [Harvard-Smithsonian Center for Astrophysics, Cambridge, MA (United States)], E-mail: skorzennik@cfa.harvard.edu

    2008-10-15

    In 2005, I presented a new fitting methodology (Yet AnOther Peak Bagging Method -YAOPBM), derived for very-long time series (2088-day-long) and applied it to low degree modes, {iota} {<=} 25. That very-long time series was also sub-divided into shorter segments (728-day-long) that were each fitted over the same range of degrees, to estimate changes with solar activity levels. I present here the extension of this method in several 'directions': a) to substantially higher degrees ({iota} {<=} 125); b) to shorter time series (364- and 182-day-long); and c) to additional 728-day-long segments, covering now some 10 years of observations. I discuss issues with the fitting, namely the leakage matrix, and the f- and p1 mode at very low frequencies, and I present some of the characteristics of the observed temporal changes.

  17. With medium-chain triglycerides, higher and faster oxygen radical production by stimulated polymorphonuclear leukocytes occurs.

    Science.gov (United States)

    Kruimel, J W; Naber, A H; Curfs, J H; Wenker, M A; Jansen, J B

    2000-01-01

    Parenteral lipid emulsions are suspected of suppressing the immune function. However, study results are contradictory and mainly concern the conventional long-chain triglyceride emulsions. Polymorphonuclear leukocytes were preincubated with parenteral lipid emulsions. The influence of the lipid emulsions on the production of oxygen radicals by these stimulated leukocytes was studied by measuring chemiluminescence. Three different parenteral lipid emulsions were tested: long-chain triglycerides, a physical mixture of medium- and long-chain triglycerides, and structured triglycerides. Structured triglycerides consist of triglycerides where the medium- and long-chain fatty acids are attached to the same glycerol molecule. Stimulated polymorphonuclear leukocytes preincubated with the physical mixture of medium- and long-chain triglycerides showed higher levels of oxygen radicals (p triglycerides or structured triglycerides. Additional studies indicated that differences in results of various lipid emulsions were not caused by differences in emulsifier. The overall production of oxygen radicals was significantly lower after preincubation with the three lipid emulsions compared with controls without lipid emulsion. A physical mixture of medium- and long-chain triglycerides induced faster production of oxygen radicals, resulting in higher levels of oxygen radicals, compared with long-chain triglycerides or structured triglycerides. This can be detrimental in cases where oxygen radicals play either a pathogenic role or a beneficial one, such as when rapid phagocytosis and killing of bacteria is needed. The observed lower production of oxygen radicals by polymorphonuclear leukocytes in the presence of parenteral lipid emulsions may result in immunosuppression by these lipids.

  18. Higher spins tunneling from a time dependent and spherically symmetric black hole

    International Nuclear Information System (INIS)

    Siahaan, Haryanto M.

    2016-01-01

    The discussions of Hawking radiation via tunneling method have been performed extensively in the case of scalar particles. Moreover, there are also several works in discussing the tunneling method for Hawking radiation by using higher spins, e.g. neutrino, photon, and gravitino, in the background of static black holes. Interestingly, it is found that the Hawking temperature for static black holes using the higher spins particles has no difference compared to the one computed using scalars. In this paper, we study the Hawking radiation for a spherically symmetric and time dependent black holes using the tunneling of Dirac particles, photon, and gravitino. We find that the obtained Hawking temperature is similar to the one derived in the tunneling method by using scalars. (orig.)

  19. Higher spins tunneling from a time dependent and spherically symmetric black hole

    Energy Technology Data Exchange (ETDEWEB)

    Siahaan, Haryanto M. [Parahyangan Catholic University, Physics Department, Bandung (Indonesia)

    2016-03-15

    The discussions of Hawking radiation via tunneling method have been performed extensively in the case of scalar particles. Moreover, there are also several works in discussing the tunneling method for Hawking radiation by using higher spins, e.g. neutrino, photon, and gravitino, in the background of static black holes. Interestingly, it is found that the Hawking temperature for static black holes using the higher spins particles has no difference compared to the one computed using scalars. In this paper, we study the Hawking radiation for a spherically symmetric and time dependent black holes using the tunneling of Dirac particles, photon, and gravitino. We find that the obtained Hawking temperature is similar to the one derived in the tunneling method by using scalars. (orig.)

  20. Calculating Higher-Order Moments of Phylogenetic Stochastic Mapping Summaries in Linear Time

    Science.gov (United States)

    Dhar, Amrit

    2017-01-01

    Abstract Stochastic mapping is a simulation-based method for probabilistically mapping substitution histories onto phylogenies according to continuous-time Markov models of evolution. This technique can be used to infer properties of the evolutionary process on the phylogeny and, unlike parsimony-based mapping, conditions on the observed data to randomly draw substitution mappings that do not necessarily require the minimum number of events on a tree. Most stochastic mapping applications simulate substitution mappings only to estimate the mean and/or variance of two commonly used mapping summaries: the number of particular types of substitutions (labeled substitution counts) and the time spent in a particular group of states (labeled dwelling times) on the tree. Fast, simulation-free algorithms for calculating the mean of stochastic mapping summaries exist. Importantly, these algorithms scale linearly in the number of tips/leaves of the phylogenetic tree. However, to our knowledge, no such algorithm exists for calculating higher-order moments of stochastic mapping summaries. We present one such simulation-free dynamic programming algorithm that calculates prior and posterior mapping variances and scales linearly in the number of phylogeny tips. Our procedure suggests a general framework that can be used to efficiently compute higher-order moments of stochastic mapping summaries without simulations. We demonstrate the usefulness of our algorithm by extending previously developed statistical tests for rate variation across sites and for detecting evolutionarily conserved regions in genomic sequences. PMID:28177780

  1. Flexible Learning and Teaching: Looking Beyond the Binary of Full-time/Part-time Provision in South African Higher Education

    Directory of Open Access Journals (Sweden)

    Barbara M Jones

    2015-06-01

    Full Text Available This paper engages with literature on flexible learning and teaching in order to explore whether it may be possible, within the South African context, to have flexible learning and teaching provide a third way which goes beyond the current practice of full-time/part-time provision. This binary classification of students is a proxy for day-time/after-hours delivery.  The argument is made that effective, flexible learning and teaching requires a fundamental shift in thinking about learning and teaching in higher education that moves us beyond such binaries. The paper proposes that in order to ensure access and success for students, ‘common knowledge’ (Edwards, 2010 will need to be co-constructed which understands flexible learning and teaching in ways which will meet needs of a diversity of students, including working students. It will require ‘resourceful leadership’ (Edwards, 2014 within the university that recognises, enhances and gives purpose to the capability of colleagues at every level of the systems they lead. Also, it will require the building of ‘common knowledge’ between certain sectors of universities and particular workplaces.

  2. TIME MANAGEMENT SKILLS IN HIGHER INSTITUTIONS: A CASE STUDY OF ELECTRICAL, ELECTRONIC & SYSTEMS ENGINEERING UNDERGRADUATE STUDENTS

    Directory of Open Access Journals (Sweden)

    NORBAHIAH MISRAN

    2016-11-01

    Full Text Available Time management is an important skill that every student in higher education institutions should acquire since it is one of the key factors in assuring excellent achievement in academic. Students with poor time-management skills are far more likely to be tressed and, as a result, have a negative impact on the quality of life. Thus, this paper discusses this issue based on a study among students of Electrical, Electronic & System Engineering at Universiti Kebangsaan Malaysia according to year of study and then establishes the relationship with the student's academic performance. Data were collected using a set of questionnaire carried out on 272 undergraduate students from year one to year four for 2015/2016 session. These data were then analysed using ANOVA statistical inference and Pearson correlations. Results revealed that time management skills of the respondents were at moderate level and established a negative correlation with year of study. This study also found significant findings where time management skills have a positive but weak correlation with student’s academic performance. These findings suggest the need for additional research to further refine the justifications of these measures. The university is also anticipated to provide a good platform for students to develop their time management skills at the early stage of their admission to university.

  3. Wavelet Transform Based Higher Order Statistical Analysis of Wind and Wave Time Histories

    Science.gov (United States)

    Habib Huseni, Gulamhusenwala; Balaji, Ramakrishnan

    2017-10-01

    Wind, blowing on the surface of the ocean, imparts the energy to generate the waves. Understanding the wind-wave interactions is essential for an oceanographer. This study involves higher order spectral analyses of wind speeds and significant wave height time histories, extracted from European Centre for Medium-Range Weather Forecast database at an offshore location off Mumbai coast, through continuous wavelet transform. The time histories were divided by the seasons; pre-monsoon, monsoon, post-monsoon and winter and the analysis were carried out to the individual data sets, to assess the effect of various seasons on the wind-wave interactions. The analysis revealed that the frequency coupling of wind speeds and wave heights of various seasons. The details of data, analysing technique and results are presented in this paper.

  4. Flexibility of production systems and prepare-finish time

    Directory of Open Access Journals (Sweden)

    Vukićević Milan R.

    2006-01-01

    Full Text Available One of the specificities of the large-serial and mass production is the almost neglected percentage of prepare-finish time in the production cycle. In the conditions of today dominant discontinuous production, it becomes a significant element of the production cycle. The eastern (Japan doctrine of increasing the flexibility of the production systems, is based inter alia also on the extreme reduction of the prepare-finish time. For this reason, the aim of this study was to identify the types and percentages of individual jobs within the group of prepare-finish jobs. The sample consisted of 3 (three production systems for the production of joinery, with the discontinuous production system. The research shows that the percentage of time of the jobs installation of work instruments, regulation of processing regime, and removal of work instruments is extremely long and that it ranges between 11.83% and 18.93% of the shift time. The reasons of the high percentage of these jobs are the wide range of products and the absence of the rationalisation of prepare-finish jobs. Within the efforts to minimize the effects of disruption and to increase the flexibility of the production systems, the rationalisation of prepare-finish jobs is the unavoidable condition.

  5. Evolution of product lifespan and implications for environmental assessment and management: a case study of personal computers in higher education.

    Science.gov (United States)

    Babbitt, Callie W; Kahhat, Ramzy; Williams, Eric; Babbitt, Gregory A

    2009-07-01

    Product lifespan is a fundamental variable in understanding the environmental impacts associated with the life cycle of products. Existing life cycle and materials flow studies of products, almost without exception, consider lifespan to be constant over time. To determine the validity of this assumption, this study provides an empirical documentation of the long-term evolution of personal computer lifespan, using a major U.S. university as a case study. Results indicate that over the period 1985-2000, computer lifespan (purchase to "disposal") decreased steadily from a mean of 10.7 years in 1985 to 5.5 years in 2000. The distribution of lifespan also evolved, becoming narrower over time. Overall, however, lifespan distribution was broader than normally considered in life cycle assessments or materials flow forecasts of electronic waste management for policy. We argue that these results suggest that at least for computers, the assumption of constant lifespan is problematic and that it is important to work toward understanding the dynamics of use patterns. We modify an age-structured model of population dynamics from biology as a modeling approach to describe product life cycles. Lastly, the purchase share and generation of obsolete computers from the higher education sector is estimated using different scenarios for the dynamics of product lifespan.

  6. Production and Comprehension of Time Reference in Korean Nonfluent Aphasia

    Science.gov (United States)

    Lee, Jiyeon; Kwon, Miseon; Na, Hae Ri; Bastiaanse, Roelien; Thompson, Cynthia K.

    2015-01-01

    Objectives Individuals with nonfluent agrammatic aphasia show impaired production and comprehension of time reference via verbal morphology. However, cross-linguistic findings to date suggest inconsistent evidence as to whether tense processing in general is impaired or time reference to the past is selectively difficult in this population. This study examined production and comprehension of time reference via verb morphology in Korean-speaking individuals with nonfluent aphasia. Methods A group of 9 healthy controls and 8 individuals with nonfluent aphasia (5 for the production task) participated in the study. Sentence priming production and auditory sentence to picture matching tasks were used, parallel with the previous cross-linguistic experiments in English, Chinese, Turkish, and others. Results The participants with nonfluent aphasia showed different patterns of impairment in production and comprehension. In production, they were impaired in all time references with errors being dominated by substitution of incorrect time references and other morpho-phonologically well-formed errors, indicating a largely intact morphological affixation process. In comprehension, they showed selective impairment of the past, consistent with the cross-linguistic evidence from English, Chinese, Turkish, and others. Conclusion The findings suggest that interpretation of past time reference poses particular difficulty in nonfluent aphasia irrespective of typological characteristics of languages; however, in production, language-specific morpho-semantic functions of verbal morphology may play a significant role in selective breakdowns of time reference. PMID:26290861

  7. Utilization of Microalgal Biofractions for Bioethanol, Higher Alcohols, and Biodiesel Production: A Review

    Directory of Open Access Journals (Sweden)

    Marwa M. El-Dalatony

    2017-12-01

    Full Text Available Biomass is a crucial energy resource used for the generation of electricity and transportation fuels. Microalgae exhibit a high content of biocomponents which makes them a potential feedstock for the generation of ecofriendly biofuels. Biofuels derived from microalgae are suitable carbon-neutral replacements for petroleum. Fermentation is the major process for metabolic conversion of microalgal biocompounds into biofuels such as bioethanol and higher alcohols. In this review, we explored the use of all three major biocomponents of microalgal biomass including carbohydrates, proteins, and lipids for maximum biofuel generation. Application of several pretreatment methods for enhancement the bioavailability of substrates (simple sugar, amino acid, and fatty acid was discussed. This review goes one step further to discuss how to direct these biocomponents for the generation of various biofuels (bioethanol, higher alcohol, and biodiesel through fermentation and transesterification processes. Such an approach would result in the maximum utilization of biomasses for economically feasible biofuel production.

  8. Higher order constraints on the Higgs production rate from fixed-target DIS data

    International Nuclear Information System (INIS)

    Alekhin, S.; Bluemlein, J.; Moch, S.

    2011-01-01

    The constraints of fixed-target DIS data in fits of parton distributions including QCD corrections to next-to-next-to leading order are studied. We point out a potential problem in the analysis of the NMC data which can lead to inconsistencies in the extracted value for α s (M Z ) and the gluon distribution at higher orders in QCD. The implications for predictions of rates for Standard Model Higgs boson production at hadron colliders are investigated. We conclude that the current range of excluded Higgs boson masses at the Tevatron appears to be much too large. (orig.)

  9. Improving Spiking Dynamical Networks: Accurate Delays, Higher-Order Synapses, and Time Cells.

    Science.gov (United States)

    Voelker, Aaron R; Eliasmith, Chris

    2018-03-01

    Researchers building spiking neural networks face the challenge of improving the biological plausibility of their model networks while maintaining the ability to quantitatively characterize network behavior. In this work, we extend the theory behind the neural engineering framework (NEF), a method of building spiking dynamical networks, to permit the use of a broad class of synapse models while maintaining prescribed dynamics up to a given order. This theory improves our understanding of how low-level synaptic properties alter the accuracy of high-level computations in spiking dynamical networks. For completeness, we provide characterizations for both continuous-time (i.e., analog) and discrete-time (i.e., digital) simulations. We demonstrate the utility of these extensions by mapping an optimal delay line onto various spiking dynamical networks using higher-order models of the synapse. We show that these networks nonlinearly encode rolling windows of input history, using a scale invariant representation, with accuracy depending on the frequency content of the input signal. Finally, we reveal that these methods provide a novel explanation of time cell responses during a delay task, which have been observed throughout hippocampus, striatum, and cortex.

  10. Production Time Loss Reduction in Sauce Production Line by Lean Six Sigma Approach

    Science.gov (United States)

    Ritprasertsri, Thitima; Chutima, Parames

    2017-06-01

    In all industries, time losses, which are incurred in processing are very important. As a result, losses are incurred in productivity and cost. This research aimed to reduce lost time that occurs in sauce production line by using the lean six sigma approach. The main objective was to reduce the time for heating sauce which causes a lot of time lost in the production line which affects productivity. The methodology was comprised of the five-phase improvement model of Six Sigma. This approach begins with defining phase, measuring phase, analysing phase, improving phase and controlling phase. Cause-and-effect matrix and failure mode and effect analysis (FMEA) were adopted to screen the factors which affect production time loss. The results showed that the percentage of lost time from heating sauce reduced by 47.76%. This increased productivity to meet the plan.

  11. A novel fast gas chromatography method for higher time resolution measurements of speciated monoterpenes in air

    Science.gov (United States)

    Jones, C. E.; Kato, S.; Nakashima, Y.; Kajii, Y.

    2014-05-01

    Biogenic emissions supply the largest fraction of non-methane volatile organic compounds (VOC) from the biosphere to the atmospheric boundary layer, and typically comprise a complex mixture of reactive terpenes. Due to this chemical complexity, achieving comprehensive measurements of biogenic VOC (BVOC) in air within a satisfactory time resolution is analytically challenging. To address this, we have developed a novel, fully automated Fast Gas Chromatography (Fast-GC) based technique to provide higher time resolution monitoring of monoterpenes (and selected other C9-C15 terpenes) during plant emission studies and in ambient air. To our knowledge, this is the first study to apply a Fast-GC based separation technique to achieve quantification of terpenes in ambient air. Three chromatography methods have been developed for atmospheric terpene analysis under different sampling scenarios. Each method facilitates chromatographic separation of selected BVOC within a significantly reduced analysis time compared to conventional GC methods, whilst maintaining the ability to quantify individual monoterpene structural isomers. Using this approach, the C9-C15 BVOC composition of single plant emissions may be characterised within a 14.5 min analysis time. Moreover, in-situ quantification of 12 monoterpenes in unpolluted ambient air may be achieved within an 11.7 min chromatographic separation time (increasing to 19.7 min when simultaneous quantification of multiple oxygenated C9-C10 terpenoids is required, and/or when concentrations of anthropogenic VOC are significant). These analysis times potentially allow for a twofold to fivefold increase in measurement frequency compared to conventional GC methods. Here we outline the technical details and analytical capability of this chromatographic approach, and present the first in-situ Fast-GC observations of 6 monoterpenes and the oxygenated BVOC (OBVOC) linalool in ambient air. During this field deployment within a suburban forest

  12. Agency Beliefs Over Time and Across Cultures: Free Will Beliefs Predict Higher Job Satisfaction

    Science.gov (United States)

    Feldman, Gilad; Farh, Jiing-Lih; Wong, Kin Fai Ellick

    2017-01-01

    In three studies, we examined the relationship between free will beliefs and job satisfaction over time and across cultures. Study 1 examined 252 Taiwanese real-estate agents over a 3-months period. Study 2 examined job satisfaction for 137 American workers on an online labor market over a 6-months period. Study 3 extended to a large sample of 14,062 employees from 16 countries and examined country-level moderators. We found a consistent positive relationship between the belief in free will and job satisfaction. The relationship was above and beyond other agency constructs (Study 2), mediated by perceived autonomy (Studies 2-3), and stronger in countries with a higher national endorsement of the belief in free will (Study 3). We conclude that free-will beliefs predict outcomes over time and across cultures beyond other agency constructs. We call for more cross-cultural and longitudinal studies examining free-will beliefs as predictors of real-life outcomes. PMID:29191084

  13. Effects on noise properties of GPS time series caused by higher-order ionospheric corrections

    Science.gov (United States)

    Jiang, Weiping; Deng, Liansheng; Li, Zhao; Zhou, Xiaohui; Liu, Hongfei

    2014-04-01

    Higher-order ionospheric (HOI) effects are one of the principal technique-specific error sources in precise global positioning system (GPS) analysis. These effects also influence the non-linear characteristics of GPS coordinate time series. In this paper, we investigate these effects on coordinate time series in terms of seasonal variations and noise amplitudes. Both power spectral techniques and maximum likelihood estimators (MLE) are used to evaluate these effects quantitatively and qualitatively. Our results show an overall improvement for the analysis of global sites if HOI effects are considered. We note that the noise spectral index that is used for the determination of the optimal noise models in our analysis ranged between -1 and 0 both with and without HOI corrections, implying that the coloured noise cannot be removed by these corrections. However, the corrections were found to have improved noise properties for global sites. After the corrections were applied, the noise amplitudes at most sites decreased, among which the white noise amplitudes decreased remarkably. The white noise amplitudes of up to 81.8% of the selected sites decreased in the up component, and the flicker noise of 67.5% of the sites decreased in the north component. Stacked periodogram results show that, no matter whether the HOI effects are considered or not, a common fundamental period of 1.04 cycles per year (cpy), together with the expected annual and semi-annual signals, can explain all peaks of the north and up components well. For the east component, however, reasonable results can be obtained only based on HOI corrections. HOI corrections are useful for better detecting the periodic signals in GPS coordinate time series. Moreover, the corrections contributed partly to the seasonal variations of the selected sites, especially for the up component. Statistically, HOI corrections reduced more than 50% and more than 65% of the annual and semi-annual amplitudes respectively at the

  14. A continuous-time control model on production planning network ...

    African Journals Online (AJOL)

    A continuous-time control model on production planning network. DEA Omorogbe, MIU Okunsebor. Abstract. In this paper, we give a slightly detailed review of Graves and Hollywood model on constant inventory tactical planning model for a job shop. The limitations of this model are pointed out and a continuous time ...

  15. Effect of Retention Time on Biogas Production from Poultry ...

    African Journals Online (AJOL)

    A study was carried out on different retention times in the anaerobic fermentation of slurry from poultry droppings and cassava peels. The system adopted in this work was batch-type. Daily gas production fell slightly from 130 to 32 litres as retention time was increased from 10 to 40 days for poultry droppings. For cassava ...

  16. Time Domain Partitioning of Electricity Production Cost Simulations

    Energy Technology Data Exchange (ETDEWEB)

    Barrows, C. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hummon, M. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jones, W. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hale, E. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2014-01-01

    Production cost models are often used for planning by simulating power system operations over long time horizons. The simulation of a day-ahead energy market can take several weeks to compute. Tractability improvements are often made through model simplifications, such as: reductions in transmission modeling detail, relaxation of commitment variable integrality, reductions in cost modeling detail, etc. One common simplification is to partition the simulation horizon so that weekly or monthly horizons can be simulated in parallel. However, horizon partitions are often executed with overlap periods of arbitrary and sometimes zero length. We calculate the time domain persistence of historical unit commitment decisions to inform time domain partitioning of production cost models. The results are implemented using PLEXOS production cost modeling software in an HPC environment to improve the computation time of simulations while maintaining solution integrity.

  17. Discrete-Time Filter Synthesis using Product of Gegenbauer Polynomials

    OpenAIRE

    N. Stojanovic; N. Stamenkovic; I. Krstic

    2016-01-01

    A new approximation to design continuoustime and discrete-time low-pass filters, presented in this paper, based on the product of Gegenbauer polynomials, provides the ability of more flexible adjustment of passband and stopband responses. The design is achieved taking into account a prescribed specification, leading to a better trade-off among the magnitude and group delay responses. Many well-known continuous-time and discrete-time transitional filter based on the classical polynomial approx...

  18. Achieving higher efficiency of production through knowledge management via social capital management

    Directory of Open Access Journals (Sweden)

    Jana Plchová

    2015-09-01

    Full Text Available The article shows a new approach – how to reach higher efficiency in the production from knowledge management via managing social capital through measurement, motivation and stimulation. The test in a real company on the Toyota system implementation is de-scribed. The active involvement of people is an important part of the Toyota system success. This is obvious in Japan but creates a big problem in Europe. These problems were tested in order to answer the following questions: 1. Is it possible to measure the social system level before the application of the system?, 2. Is it possible to evaluate the necessary level of the social system for successful implementation in advance?, 3. Is it possible to cultivate the social system to the desired level? We try to answer all of these questions adopting the Kopčaj Spiral Management approach. The practical results on an existing company are presented together with managerial recommendations.

  19. Forestry and fiber crop production in the higher rainfall areas of tropical Australia

    Energy Technology Data Exchange (ETDEWEB)

    Wood, I.M.; Volck, H.E.; Cameron, D.M.; Thomson, N.J.

    1981-01-01

    An analysis of the nearly 1 million square km of higher rainfall area shows that less than 4% has potential for arable agriculture or commercial forestry. Except for rain forest on the eastern Queensland coast (now largely protected), native forest has little potential for timber or pulp. Plantations of Pinus caribaea var. hondurensis offer the best potential for forest production in Queensland and Northern Territory. The most promising agricultural fiber crops for paper pulp are bagasse, which could be upgraded by mixing with pine mill wastes, and kenaf (Hibiscus cannabinus). The freight costs involved in a forestry and fiber project in northern Australia are analyzed and the possibility of some local processing is considered. (Refs. 33).

  20. Higher Education R&D and Productivity Growth: An Empirical Study on High-Income OECD Countries

    Science.gov (United States)

    Eid, Ashraf

    2012-01-01

    This paper is a macro study on higher education R&D and its impact on productivity growth. I measure the social rate of return on higher education R&D in 17 high-income OECD countries using country level data on the percentage of gross expenditure on R&D performed by higher education, business, and government sectors over the period…

  1. Does foreign direct investment cause higher levels of productivity or do higher levels of productivity attract foreign direct investment? A study in transforming brazilian industry

    Directory of Open Access Journals (Sweden)

    Nádia Campos Pereira

    2013-04-01

    Full Text Available DOI: http://dx.doi.org/10.5007/2175-8077.2013v15n35p82   With this research, it was aimed to investigate the factors that determine the investment decision of foreign investors in the Brazilian industry. Evidence shows that foreign investors are attracted not only by more productive and best performing sectors, but depending on the adopted strategy, they may choose investment projects in sectors that have lower performance levels which offer the potential for growth and the and improvement of efficiency levels and capacity. Granger causality test indicated that not only foreign investment gives more productivity gains, but also this productivity induces more foreign investment inputs. Foreign investors are also attracted by those sectors, which use their assets in an inefficient way in order to generate profits. These sectors may be attractive to foreign investors that want to invest in a more aggressive growth policy in order to get advantages on the availability of inefficiently used assets. These sectors may be also attractive targets to investors who seek to compete directly in relatively less competitive sectors.

  2. Goods-Time Elasticity of Substitution in Health Production.

    Science.gov (United States)

    Du, Juan; Yagihashi, Takeshi

    2017-11-01

    We examine how inputs for health production, in particular, medical care and health-enhancing time, are combined to improve health. The estimated elasticity of substitution from a constant elasticity of substitution production function is significantly less than one for the working-age population, rejecting the unit elasticity of substitution used in previous studies. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  3. A stochastic surplus production model in continuous time

    DEFF Research Database (Denmark)

    Pedersen, Martin Wæver; Berg, Casper Willestofte

    2017-01-01

    surplus production model in continuous time (SPiCT), which in addition to stock dynamics also models the dynamics of the fisheries. This enables error in the catch process to be reflected in the uncertainty of estimated model parameters and management quantities. Benefits of the continuous-time state......Surplus production modelling has a long history as a method for managing data-limited fish stocks. Recent advancements have cast surplus production models as state-space models that separate random variability of stock dynamics from error in observed indices of biomass. We present a stochastic......-space model formulation include the ability to provide estimates of exploitable biomass and fishing mortality at any point in time from data sampled at arbitrary and possibly irregular intervals. We show in a simulation that the ability to analyse subannual data can increase the effective sample size...

  4. Reduced Time in Therapeutic Range and Higher Mortality in Atrial Fibrillation Patients Taking Acenocoumarol.

    Science.gov (United States)

    Rivera-Caravaca, José Miguel; Roldán, Vanessa; Esteve-Pastor, María Asunción; Valdés, Mariano; Vicente, Vicente; Marín, Francisco; Lip, Gregory Y H

    2018-01-01

    The efficacy and tolerability of vitamin K antagonists (VKAs) depends on the quality of anticoagulant control, reflected by the mean time in therapeutic range (TTR) of international normalized ratio 2.0 to 3.0. In the present study, we aimed to investigate the association between TTR and change in TTR (ΔTTR) with the risk of mortality and clinically significant events in a consecutive cohort of atrial fibrillation (AF) patients. We included 1361 AF patients stable on VKAs (international normalized ratio 2.0-3.0) during at least the previous 6 months. After 6 months of follow-up we recalculated TTR, calculated ΔTTR (ie, the difference between baseline and 6-month TTRs) and investigated the association of both with the risk of mortality and "clinically significant events" (defined as the composite of stroke or systemic embolism, major bleeding, acute coronary syndrome, acute heart failure, and all-cause deaths). The median ΔTTR at 6 months of entry was 20% (interquartile range 0-34%), 796 (58.5%) patients had a TTR reduction of at least 20%, while 330 (24.2%) had a TTR <65%. During follow-up, 34 (2.5% [4.16% per year]) patients died and 61 (4.5% [7.47% per year]) had a clinically significant event. Median ΔTTR was significantly higher in patients who died (35.5% vs 20%; P = 0.002) or sustained clinically significant events (28% vs 20%; P = 0.022). Based on Cox regression analyses, the overall risk of mortality at 6 months for each decrease point in TTR was 1.02 (95% CI, 1.01-1.04; P = 0.003), and the risk of clinically significant events was 1.01 (95% CI, 1.00-1.03; P = 0.028). Patients with TTR <65% at 6 months had higher risk of mortality (hazard ratio = 2.96; 95% CI, 1.51-5.81; P = 0.002) and clinically significant events (hazard ratio = 1.71; 95% CI, 1.01-2.88; P = 0.046). Our findings suggest that in AF patients anticoagulated with VKAs, a change in TTR over 6 months (ie, ΔTTR) is an independent risk factor for mortality and clinically significant events

  5. Timing of product introduction in network economies under heterogeneous demand

    DEFF Research Database (Denmark)

    Winther, Christian Dahl

    This paper studies the introduction of a new and incompatible technology in a spatial market with network externalities. In competition with an established network, the entrant chooses how long to do research and a level of product differentiation, which determine the adoption patterns of consumers...... level of product differentiation that should be chosen by the sponsor of the new technology in equilibrium. Third, the formal relationship between these variables are derived under compatibility.  Fourth, the entering firm's problem is solved by numerical methods to gain insight into the optimal linkage...... between research time and product design....

  6. Norm-times : a design for production time and variability reduction for Faes Cases

    NARCIS (Netherlands)

    Karandeinos, Georgios

    2008-01-01

    This project deals with the production process of Faes Cases business unit. This company is producing custom-made packaging and sells standard solutions with customized interior. During the last years, it was observed that the throughput time of the production is increasing and is hard to forecast

  7. The Changing Faces of Corruption in Georgian Higher Education: Access through Times and Tests

    Science.gov (United States)

    Orkodashvili, Mariam

    2012-01-01

    This article presents a comparative-historical analysis of access to higher education in Georgia. It describes the workings of corrupt channels during the Soviet and early post-Soviet periods and the role of standardized tests in fighting corruption in higher education admission processes after introduction of the Unified National Entrance…

  8. Flourishing for the Common Good: Positive Leadership in Christian Higher Education during Times of Change

    Science.gov (United States)

    Dahlvig, Jolyn E.

    2018-01-01

    This paper argues that higher education should exist for society's common good, a focus that has been lost in recent years (Dorn, 2011; Eagan et al., 2015; Ford 2016; Habley, Bloom & Robbins, 2012). To explore how Christian higher education can provide leadership in returning to a focus on the common good, this paper traces the movement of…

  9. Crop and varietal diversification of rainfed rice based cropping systems for higher productivity and profitability in Eastern India.

    Science.gov (United States)

    Lal, B; Gautam, Priyanka; Panda, B B; Raja, R; Singh, Teekam; Tripathi, R; Shahid, M; Nayak, A K

    2017-01-01

    Rice-rice system and rice fallows are no longer productive in Southeast Asia. Crop and varietal diversification of the rice based cropping systems may improve the productivity and profitability of the systems. Diversification is also a viable option to mitigate the risk of climate change. In Eastern India, farmers cultivate rice during rainy season (June-September) and land leftovers fallow after rice harvest in the post-rainy season (November-May) due to lack of sufficient rainfall or irrigation amenities. However, in lowland areas, sufficient residual soil moistures are available in rice fallow in the post-rainy season (November-March), which can be utilized for raising second crops in the region. Implementation of suitable crop/varietal diversification is thus very much vital to achieve this objective. To assess the yield performance of rice varieties under timely and late sown conditions and to evaluate the performance of dry season crops following them, three different duration rice cultivars were transplanted in July and August. In dry season several non-rice crops were sown in rice fallow to constitute a cropping system. The results revealed that tiller occurrence, biomass accumulation, dry matter remobilization, crop growth rate, and ultimately yield were significantly decreased under late transplanting. On an average, around 30% yield reduction obtained under late sowing may be due to low temperature stress and high rainfall at reproductive stages of the crop. Dry season crops following short duration rice cultivars performed better in terms of grain yield. In the dry season, toria was profitable when sown earlier and if sowing was delayed greengram was suitable. Highest system productivity and profitability under timely sown rice may be due to higher dry matter remobilization from source to sink. A significant correlation was observed between biomass production and grain yield. We infer that late transplanting decrease the tiller occurrence and assimilate

  10. An economic production model for time dependent demand with rework and multiple production setups

    Directory of Open Access Journals (Sweden)

    S.R. Singh

    2014-04-01

    Full Text Available In this paper, we present a model for time dependent demand with multiple productions and rework setups. Production is demand dependent and greater than the demand rate. Production facility produces items in m production setups and one rework setup (m, 1 policy. The major reason of reverse logistic and green supply chain is rework, so it reduces the cost of production and other ecological problems. Most of the researchers developed a rework model without deteriorating items. A numerical example and sensitivity analysis is shown to describe the model.

  11. Neural correlates of time versus money in product evaluation

    Directory of Open Access Journals (Sweden)

    Sebastian eLehmann

    2012-10-01

    Full Text Available The common saying time is money reflects the widespread belief in many people’s everyday life that time is valuable like money. Psychologically and neurophysiologically, however, these concepts seem to be quite different. This research replicates prior behavioral investigations by showing that merely mentioning time (compared to merely mentioning money leads participants to evaluate a product more positively. Beyond this finding, the present functional magnetic resonance imaging (fMRI experiment provides novel insight into the neurophysiological underpinnings of this behavioral effect by showing that more positive product evaluations in the time primes (compared to money primes are preceded by increased activation in the insula. Our data, therefore, support the idea of a time mindset that is different from a money mindset. Studies on the functional neuroanatomy of the insula have implicated this brain area in distinct but related psychological phenomena such as urging, addiction, loss aversion, and love. These functions imply greater personal connection between the consumer and a target subject or object and, thus, help explain why time-primed consumers rate products more positively.

  12. The peak of oil production-Timings and market recognition

    International Nuclear Information System (INIS)

    Almeida, Pedro de; Silva, Pedro D.

    2009-01-01

    Energy is essential for present societies. In particular, transportation systems depend on petroleum-based fuels. That world oil production is set to pass a peak is now a reasonably accepted concept, although its date is far from consensual. In this work, we analyze the true expectations of the oil market participants about the future availability of this fundamental energy source. We study the evolution through time of the curves of crude oil futures prices, and we conclude that the market participants, among them the crude oil producers, already expect a near-term peak of oil production. This agrees with many technical predictions for the date of peak production, including our own, that point to peak dates around the end of the present decade. If this scenario is confirmed, it can cause serious social and economical problems because societies will have little time to perform the necessary adjustments

  13. Effect of Retention Time on Biogas Production from Poultry ...

    African Journals Online (AJOL)

    JPC

    Daily gas production fell slightly from 130 to 32 litres as retention time was ... The continuing energy crisis has reawakened interest in the anaerobic ... and hydrogen sulfide (H2S2): 0.3 vol.%. ..... Nigerian Journal of Solar Energy 15: 80 – 85.

  14. The Triggers, Timing and Speed of New Product Price Landings

    NARCIS (Netherlands)

    C. Hernández-Mireles (Carlos); D. Fok (Dennis); Ph.H.B.F. Franses (Philip Hans)

    2008-01-01

    textabstractMany high-tech products and durable goods exhibit exactly one significant price cut some time after their launch. We call this sudden transition from high to low prices the price landing. In this paper we present a new model that describes two important features of price landings: their

  15. Designing life-time recycling loops for elastomer products

    NARCIS (Netherlands)

    Noordermeer, Jacques; Dierkes, Wilma; Blume, Anke; Dijkhuis, Kuno; van Hoek, Hans; Reuvekamp, Louis; Saiwari, Siti

    2017-01-01

    With depletion of natural resources and growing awareness of the limited capabilities of the globe to cope with pollution, the need to design life-time recycling loops for all types of products is steadily increasing. Rubber articles of all sorts and the need for a proper disposal of these at the

  16. Real-Time Tropospheric Delay Estimation using IGS Products

    Science.gov (United States)

    Stürze, Andrea; Liu, Sha; Söhne, Wolfgang

    2014-05-01

    The Federal Agency for Cartography and Geodesy (BKG) routinely provides zenith tropospheric delay (ZTD) parameter for the assimilation in numerical weather models since more than 10 years. Up to now the results flowing into the EUREF Permanent Network (EPN) or E-GVAP (EUMETNET EIG GNSS water vapour programme) analysis are based on batch processing of GPS+GLONASS observations in differential network mode. For the recently started COST Action ES1206 about "Advanced Global Navigation Satellite Systems tropospheric products for monitoring severe weather events and climate" (GNSS4SWEC), however, rapid updates in the analysis of the atmospheric state for nowcasting applications require changing the processing strategy towards real-time. In the RTCM SC104 (Radio Technical Commission for Maritime Services, Special Committee 104) a format combining the advantages of Precise Point Positioning (PPP) and Real-Time Kinematic (RTK) is under development. The so-called State Space Representation approach is defining corrections, which will be transferred in real-time to the user e.g. via NTRIP (Network Transport of RTCM via Internet Protocol). Meanwhile messages for precise orbits, satellite clocks and code biases compatible to the basic PPP mode using IGS products are defined. Consequently, the IGS Real-Time Service (RTS) was launched in 2013 in order to extend the well-known precise orbit and clock products by a real-time component. Further messages e.g. with respect to ionosphere or phase biases are foreseen. Depending on the level of refinement, so different accuracies up to the RTK level shall be reachable. In co-operation of BKG and the Technical University of Darmstadt the real-time software GEMon (GREF EUREF Monitoring) is under development. GEMon is able to process GPS and GLONASS observation and RTS product data streams in PPP mode. Furthermore, several state-of-the-art troposphere models, for example based on numerical weather prediction data, are implemented. Hence, it

  17. Discrete-Time Filter Synthesis using Product of Gegenbauer Polynomials

    Directory of Open Access Journals (Sweden)

    N. Stojanovic

    2016-09-01

    Full Text Available A new approximation to design continuoustime and discrete-time low-pass filters, presented in this paper, based on the product of Gegenbauer polynomials, provides the ability of more flexible adjustment of passband and stopband responses. The design is achieved taking into account a prescribed specification, leading to a better trade-off among the magnitude and group delay responses. Many well-known continuous-time and discrete-time transitional filter based on the classical polynomial approximations(Chebyshev, Legendre, Butterworth are shown to be a special cases of proposed approximation method.

  18. Real-Time Systems: Reflections on higher education in the Czech Republic, Hungary, Poland and Slovenia

    NARCIS (Netherlands)

    File, Jonathan M.; Goedegebuure, Leo; Goedegebuure, L.C.J.

    2003-01-01

    Real-time systems (An ICT definition) In real-time multiprocessing there is the extra requirement that the system complete its response to any input within a certain critical time. This poses additional problems, particularly in situations where the system is heavily loaded and is subject to many

  19. Analysis of labor employment assessment on production machine to minimize time production

    Science.gov (United States)

    Hernawati, Tri; Suliawati; Sari Gumay, Vita

    2018-03-01

    Every company both in the field of service and manufacturing always trying to pass efficiency of it’s resource use. One resource that has an important role is labor. Labor has different efficiency levels for different jobs anyway. Problems related to the optimal allocation of labor that has different levels of efficiency for different jobs are called assignment problems, which is a special case of linear programming. In this research, Analysis of Labor Employment Assesment on Production Machine to Minimize Time Production, in PT PDM is done by using Hungarian algorithm. The aim of the research is to get the assignment of optimal labor on production machine to minimize time production. The results showed that the assignment of existing labor is not suitable because the time of completion of the assignment is longer than the assignment by using the Hungarian algorithm. By applying the Hungarian algorithm obtained time savings of 16%.

  20. Effects of oncoming target velocities on rapid force production and accuracy of force production intensity and timing.

    Science.gov (United States)

    Ohta, Yoichi

    2017-12-01

    The present study aimed to clarify the effects of oncoming target velocities on the ability of rapid force production and accuracy and variability of simultaneous control of both force production intensity and timing. Twenty male participants (age: 21.0 ± 1.4 years) performed rapid gripping with a handgrip dynamometer to coincide with the arrival of an oncoming target by using a horizontal electronic trackway. The oncoming target velocities were 4, 8, and 12 m · s -1 , which were randomly produced. The grip force required was 30% of the maximal voluntary contraction. Although the peak force (Pf) and rate of force development (RFD) increased with increasing target velocity, the value of the RFD to Pf ratio was constant across the 3 target velocities. The accuracy of both force production intensity and timing decreased at higher target velocities. Moreover, the intrapersonal variability in temporal parameters was lower in the fast target velocity condition, but constant variability in 3 target velocities was observed in force intensity parameters. These results suggest that oncoming target velocity does not intrinsically affect the ability for rapid force production. However, the oncoming target velocity affects accuracy and variability of force production intensity and timing during rapid force production.

  1. The substantive core of introduction of the saving production into educational process of the higher technical educational institution

    Directory of Open Access Journals (Sweden)

    Світлана Станіславівна Єрмакова

    2016-03-01

    Full Text Available Problem and topicality of research consist in the study of theoretical and methodological problems at using the base of saving production in the higher educational institutions taking into account the special features of its activity, specificity of problems and tasks.Aim of the article was the grounding of the system of development of the higher technical education on the principles of economy. The problems consist in disclosure and substantiation of the elements of development of the higher technical education system taking into account the principles of saving production; determination of the possible use of saving production instruments in higher education sphere especially in the modern educational institution.Methods of research were the following: methods of analysis, prognostication, diagnostics, observation, pedagogical experiment.The concretized essence of saving use of the higher technical educational institution resources embodied in experimental monitoring technology of professional training of the future specialists in the higher technological educational institution on the base of idea of saving production. There was proved pedagogical expediency of advanced training of the future specialists in the process of their professional training in the higher technical educational institution on the base of saving production at its professional activity. There were substantiated: the lean-technology of professional training in the higher technical educational institution in the context of idea of continuous education based on principles of saving “production of knowledge” is the system of continuous monitoring of educational process effectiveness and of the saving use of its possibilities in the higher technical educational institution as the dominant of the future engineers training that is directed on the permanent revelation and neutralization of educational losses for the development of professionalism and creation at the expense

  2. Classical and quantum-mechanical axioms with the higher time derivative formalism

    International Nuclear Information System (INIS)

    Kamalov, Timur

    2013-01-01

    A Newtonian mechanics model is essentially the model of a point body in an inertial reference frame. How to describe extended bodies in non-inertial (vibration) reference frames with the random initial conditions? One of the most generalized ways of descriptions (known as the higher derivatives formalism) consists in taking into account the infinite number of the higher temporal derivatives of the coordinates in the Lagrange function. Such formalism describing physical objects in the infinite dimensions space does not contradict to the quantum mechanics and infinite dimensions Hilbert space.

  3. Transformative, transgressive social learning: rethinking higher education pedagogy in times of systemic global dysfunction

    NARCIS (Netherlands)

    Lotz-Sisitka, Heila; Wals, A.E.J.; Kronlid, David; McGarry, Dylan

    2015-01-01

    The nature of the sustainability challenges currently at hand is such that dominant pedagogies and forms of learning that characterize higher education need to be reconsidered to enable students and staff to deal with accelerating change, increasing complexity, contested knowledge claims and

  4. Blurring Time and Place in Higher Education with Bring Your Own Device Applications: A Literature Review

    Science.gov (United States)

    Sundgren, Marcus

    2017-01-01

    The use of mobile devices is increasing rapidly in society, and student device ownership is becoming more or less ubiquitous in many parts of the world. This might be an under-utilised resource that could benefit the educational practices of institutions of higher education. This review examines 91 journal articles from 28 countries published in…

  5. The United Nations, Peace, and Higher Education: Pedagogic Interventions in Neoliberal Times

    Science.gov (United States)

    Kester, Kevin

    2017-01-01

    Peace and conflict studies (PACS) education in recent decades has become a popular approach to social justice learning in higher education institutions (Harris, Fisk, and Rank 1998; Smith 2007; Carstarphen et al. 2010; Bajaj and Hantzopoulos 2016) and has been provided legitimacy through a number of different United Nations (UN) declarations…

  6. Breadth vs. Depth: The Timing of Specialization in Higher Education. NBER Working Paper No. 15943

    Science.gov (United States)

    Malamud, Ofer

    2010-01-01

    This paper examines the tradeoff between early and late specialization in the context of higher education. While some educational systems require students to specialize early by choosing a major field of study prior to entering university, others allow students to postpone this choice. I develop a model in which individuals, by taking courses in…

  7. Times, Measures and the Man: the Future of British Higher Education Treated Historically and Comparatively

    NARCIS (Netherlands)

    Neave, Guy

    2006-01-01

    This article is a tribute to the life work of Maurice Kogan. Very little of higher education's landscape in the United Kingdom has remained unchanged over the past four decades and this article sets out to analyze the way the perception of the role of universities in society has changed in the

  8. Optimization of animal manure vermicomposting based on biomass production of earthworms and higher plants.

    Science.gov (United States)

    Borges, Yan V; Alves, Luciano; Bianchi, Ivan; Espíndola, Jonas C; Oliveira, Juahil M De; Radetski, Claudemir M; Somensi, Cleder A

    2017-11-02

    The goal of this study was to optimize the mixture of swine manure (SM) and cattle manure (CM) used in the vermicomposting process, seeking to increase the manure biodegradation rate and enhance the biomass production of both earthworms and higher plants. To achieve this goal, physico-chemical parameters were determined to assess the final compost quality after 50 days of vermicomposting. The different manure ratios used to produce the composts (C) were as follows (SM:CM, % m/m basis): C1 100:0, C2 (75:25), C3 (50:50), C4 (25:75), and C5 (0:100). In addition, the earthworm biomass and the phytoproductivity of lettuce (Lactuca sativa L.) plants grown in mixtures (1:1) of natural soil and the most viable vermicomposts were investigated. The C1 and C2 compost compositions were associated with high earthworm mortality rates. The C3 compost provided the highest mineral concentrations and C5 showed the highest lettuce yield (wet biomass). The results verify that stabilized cattle manure is an excellent substrate for the vermicomposting process and that fresh swine manure must be mixed with pre-stabilized cattle manure to ensure an optimized vermicomposting process, which must be controlled in terms of temperature and ammonia levels. It is concluded that small livestock farmers could add value to swine manure by applying the vermicomposting process, without the need for high investments and with a minimal requirement for management of the biodegradation process. These are important technical aspects to be considered when circular economy principles are applied to small farms.

  9. Knowledge Production and Distribution by Institutions of Higher Education in Sub-Saharan Africa: Opportunities and Challenges

    Science.gov (United States)

    Ondari-Okemwa, E.

    2011-01-01

    This article focuses on available opportunities and challenges which institutions of higher education in sub-Saharan Africa face in producing and distributing knowledge. Institutions of higher education are also expected to produce knowledge workers for the knowledge economy. Knowledge production falls into Mode 1, in which problems are set and…

  10. On a higher order multi-term time-fractional partial differential equation involving Caputo-Fabrizio derivative

    OpenAIRE

    Pirnapasov, Sardor; Karimov, Erkinjon

    2017-01-01

    In the present work we discuss higher order multi-term partial differential equation (PDE) with the Caputo-Fabrizio fractional derivative in time. We investigate a boundary value problem for fractional heat equation involving higher order Caputo-Fabrizio derivatives in time-variable. Using method of separation of variables and integration by parts, we reduce fractional order PDE to the integer order. We represent explicit solution of formulated problem in particular case by Fourier series.

  11. Time-ordered product expansions for computational stochastic system biology

    International Nuclear Information System (INIS)

    Mjolsness, Eric

    2013-01-01

    The time-ordered product framework of quantum field theory can also be used to understand salient phenomena in stochastic biochemical networks. It is used here to derive Gillespie’s stochastic simulation algorithm (SSA) for chemical reaction networks; consequently, the SSA can be interpreted in terms of Feynman diagrams. It is also used here to derive other, more general simulation and parameter-learning algorithms including simulation algorithms for networks of stochastic reaction-like processes operating on parameterized objects, and also hybrid stochastic reaction/differential equation models in which systems of ordinary differential equations evolve the parameters of objects that can also undergo stochastic reactions. Thus, the time-ordered product expansion can be used systematically to derive simulation and parameter-fitting algorithms for stochastic systems. (paper)

  12. Time-discrete higher order ALE formulations: a priori error analysis

    KAUST Repository

    Bonito, Andrea; Kyza, Irene; Nochetto, Ricardo H.

    2013-01-01

    We derive optimal a priori error estimates for discontinuous Galerkin (dG) time discrete schemes of any order applied to an advection-diffusion model defined on moving domains and written in the Arbitrary Lagrangian Eulerian (ALE) framework. Our

  13. A higher order numerical method for time fractional partial differential equations with nonsmooth data

    Science.gov (United States)

    Xing, Yanyuan; Yan, Yubin

    2018-03-01

    Gao et al. [11] (2014) introduced a numerical scheme to approximate the Caputo fractional derivative with the convergence rate O (k 3 - α), 0 equation is sufficiently smooth, Lv and Xu [20] (2016) proved by using energy method that the corresponding numerical method for solving time fractional partial differential equation has the convergence rate O (k 3 - α), 0 equation has low regularity and in this case the numerical method fails to have the convergence rate O (k 3 - α), 0 quadratic interpolation polynomials. Based on this scheme, we introduce a time discretization scheme to approximate the time fractional partial differential equation and show by using Laplace transform methods that the time discretization scheme has the convergence rate O (k 3 - α), 0 0 for smooth and nonsmooth data in both homogeneous and inhomogeneous cases. Numerical examples are given to show that the theoretical results are consistent with the numerical results.

  14. Part-time Work, Wages and Productivity:Evidence from Belgian Matched Panel Data

    OpenAIRE

    Garnero, Andrea; Kampelmann, Stephan; Rycx, François

    2013-01-01

    The authors use matched employer-employee panel data on Belgian private-sector firms to estimate the relationship between wage/productivity differentials and the firm’s labor composition in terms of part-time and sex. Findings suggest that the groups of women and part-timers generate employer rents, but also that the origin of these rents differs (relatively lower wages for women, relatively higher productivity for part-timers). Interactions between gender and part-time suggest that the posit...

  15. Regulation of Saccharomyces cerevisiae genetic engineering on the production of acetate esters and higher alcohols during Chinese Baijiu fermentation.

    Science.gov (United States)

    Li, Wei; Wang, Jian-Hui; Zhang, Cui-Ying; Ma, Hong-Xia; Xiao, Dong-Guang

    2017-06-01

    Acetate esters and higher alcohols greatly influence the quality and flavor profiles of Chinese Baijiu (Chinese liquor). Various mutants have been constructed to investigate the interactions of ATF1 overexpression, IAH1 deletion, and BAT2 deletion on the production of acetate esters and higher alcohols. The results showed that the overexpression of ATF1 under the control of the PGK1 promoter with BAT2 and IAH1 double-gene deletion led to a higher production of acetate esters and a lower production of higher alcohols than the overexpression of ATF1 with IAH1 deletion or overexpression of ATF1 with BAT2 deletion. Moreover, deletion of IAH1 in ATF1 overexpression strains effectively increased the production of isobutyl acetate and isoamyl acetate by reducing the hydrolysis of acetate esters. The decline in the production of higher alcohol by the ATF1 overexpression strains with BAT2 deletion is due to the interaction of ATF1 overexpression and BAT2 deletion. Mutants with varying abilities of producing acetate esters and higher alcohols were developed by genetic engineering. These strains have great potential for industrial application.

  16. Optimal Consumer Electronics Product Take-Back Time with Consideration of Consumer Value

    Directory of Open Access Journals (Sweden)

    Yi-Tse Fang

    2017-03-01

    Full Text Available Rapid economic growth in recent years has transformed our lifestyle to massively produce, consume, and dispose of products, especially for consumer electronics. This change has put great threat to our environment and caused natural resource depletion. Moreover, short product life cycles and quick replacements of consumer electronics create enormous electronic wastes (e-wastes. Without proper waste management, immense environmental damage is expected. In this empirical study, we notice that lots of valuable materials that can still be recycled from these used consumer electronics are left unused at home instead of being recycled at the appropriate time, which causes a low collection rate and a decrease in residual value for the used products. Therefore, it is important for the government and the recyclers to handle them efficiently by increasing the used product take-back rate. Our study develops an assessment model for customer value based on the idea of value engineering and the perspective of product life cycle. We also explore the relationship between product value and the total cost of ownership with an evaluation of their time variation, considering different usage modes for various consumer groups and different recycling award schemes (fixed and variable recycling awards. Proper take-back management is likely to create a win-win situation both for consumers and environmental protection. This study regards the notebook computer as an example to determine the optimal time for recycling laptops based on usage patterns and provides consumers a reference for when to replace their used product. The results from our modeling firstly clearly indicate that consumers with higher frequency of usage have shorter take back times and higher maximum consumer value. Secondly, a variable recycling award scheme with higher maximum consumer value is more practical than a fixed recycling award scheme.

  17. Earlier school start times are associated with higher rates of behavioral problems in elementary schools.

    Science.gov (United States)

    Keller, Peggy S; Gilbert, Lauren R; Haak, Eric A; Bi, Shuang; Smith, Olivia A

    2017-04-01

    Early school start times may curtail children's sleep and inadvertently promote sleep restriction. The current study examines the potential implications for early school start times for behavioral problems in public elementary schools (student ages 5-12 years) in Kentucky. School start times were obtained from school Web sites or by calling school offices; behavioral and disciplinary problems, along with demographic information about schools, were obtained from the Kentucky Department of Education. Estimated associations controlled for teacher/student ratio, racial composition, school rank, enrollment, and Appalachian location. Associations between early school start time and greater behavioral problems (harassment, in-school removals, suspensions, and expulsions) were observed, although some of these associations were found only for schools serving the non-Appalachian region. Findings support the growing body of research showing that early school start times may contribute to student problems, and extend this research through a large-scale examination of elementary schools, behavioral outcomes, and potential moderators of risk. Copyright © 2017 National Sleep Foundation. Published by Elsevier Inc. All rights reserved.

  18. Late-time tails of wave propagation in higher dimensional spacetimes

    International Nuclear Information System (INIS)

    Cardoso, Vitor; Yoshida, Shijun; Dias, Oscar J.C.; Lemos, Jose P.S.

    2003-01-01

    We study the late-time tails appearing in the propagation of massless fields (scalar, electromagnetic, and gravitational) in the vicinities of a D-dimensional Schwarzschild black hole. We find that at late times the fields always exhibit a power-law falloff, but the power law is highly sensitive to the dimensionality of the spacetime. Accordingly, for odd D>3 we find that the field behaves as t -(2l+D-2) at late times, where l is the angular index determining the angular dependence of the field. This behavior is entirely due to D being odd; it does not depend on the presence of a black hole in the spacetime. Indeed this tail is already present in the flat space Green's function. On the other hand, for even D>4 the field decays as t -(2l+3D-8) , and this time there is no contribution from the flat background. This power law is entirely due to the presence of the black hole. The D=4 case is special and exhibits, as is well known, t -(2l+3) behavior. In the extra dimensional scenario for our Universe, our results are strictly correct if the extra dimensions are infinite, but also give a good description of the late-time behavior of any field if the large extra dimensions are large enough

  19. Higher measured than modeled ozone production at increased NOx levels in the Colorado Front Range

    Directory of Open Access Journals (Sweden)

    B. C. Baier

    2017-09-01

    Full Text Available Chemical models must correctly calculate the ozone formation rate, P(O3, to accurately predict ozone levels and to test mitigation strategies. However, air quality models can have large uncertainties in P(O3 calculations, which can create uncertainties in ozone forecasts, especially during the summertime when P(O3 is high. One way to test mechanisms is to compare modeled P(O3 to direct measurements. During summer 2014, the Measurement of Ozone Production Sensor (MOPS directly measured net P(O3 in Golden, CO, approximately 25 km west of Denver along the Colorado Front Range. Net P(O3 was compared to rates calculated by a photochemical box model that was constrained by measurements of other chemical species and that used a lumped chemical mechanism and a more explicit one. Median observed P(O3 was up to a factor of 2 higher than that modeled during early morning hours when nitric oxide (NO levels were high and was similar to modeled P(O3 for the rest of the day. While all interferences and offsets in this new method are not fully understood, simulations of these possible uncertainties cannot explain the observed P(O3 behavior. Modeled and measured P(O3 and peroxy radical (HO2 and RO2 discrepancies observed here are similar to those presented in prior studies. While a missing atmospheric organic peroxy radical source from volatile organic compounds co-emitted with NO could be one plausible solution to the P(O3 discrepancy, such a source has not been identified and does not fully explain the peroxy radical model–data mismatch. If the MOPS accurately depicts atmospheric P(O3, then these results would imply that P(O3 in Golden, CO, would be NOx-sensitive for more of the day than what is calculated by models, extending the NOx-sensitive P(O3 regime from the afternoon further into the morning. These results could affect ozone reduction strategies for the region surrounding Golden and possibly other areas that do not comply with national ozone

  20. Approximate solution of space and time fractional higher order phase field equation

    Science.gov (United States)

    Shamseldeen, S.

    2018-03-01

    This paper is concerned with a class of space and time fractional partial differential equation (STFDE) with Riesz derivative in space and Caputo in time. The proposed STFDE is considered as a generalization of a sixth-order partial phase field equation. We describe the application of the optimal homotopy analysis method (OHAM) to obtain an approximate solution for the suggested fractional initial value problem. An averaged-squared residual error function is defined and used to determine the optimal convergence control parameter. Two numerical examples are studied, considering periodic and non-periodic initial conditions, to justify the efficiency and the accuracy of the adopted iterative approach. The dependence of the solution on the order of the fractional derivative in space and time and model parameters is investigated.

  1. Riccion from higher-dimensional space-time with D-dimensional ...

    Indian Academy of Sciences (India)

    suggest that space-time above 3 05¢1016 GeV should be fractal. .... Here VD is the volume of SD, g´4·Dµ is the determinant of the metric tensor gMN (M ...... means that above 3.05x1016 GeV, SD is not a smooth surface whereas M4 is smooth.

  2. Widening Participation, Social Justice and Injustice: Part-Time Students in Higher Education in England

    Science.gov (United States)

    Callender, Claire

    2011-01-01

    This article critically assesses the nature and scope of current financial support for part-time undergraduates in England, highlighting its importance for widening participation. It considers the limitations of these financial arrangements, why they are in need of reform, and some of the consequences of their inadequacies. The paper argues that…

  3. Seven Steps to Heaven: Time and Tide in 21st Century Contemporary Music Higher Education

    Science.gov (United States)

    Mitchell, Annie K.

    2018-01-01

    Throughout the time of my teaching career, the tide has exposed changes in the nature of music, students and music education. This paper discusses teaching and learning in contemporary music at seven critical stages of 21st century music education: i) diverse types of undergraduate learners; ii) teaching traditional classical repertoire and skills…

  4. (Re-)designing higher education curricula in times of systemic dysfunction

    NARCIS (Netherlands)

    Tassone, Valentina C.; O’Mahony, Catherine; McKenna, Emma; Eppink, Hansje J.; Wals, Arjen E.J.

    2017-01-01

    There is an urgent need to address the grand sustainability challenges of our time, and to explore new and more responsible ways of operating, researching, and innovating that enable society to respond to these challenges. The emergent Responsible Research and Innovation (RRI) policy agenda can act

  5. Spanish Zimbardo Time Perspective Inventory Construction and Validity among Higher Education Students

    Science.gov (United States)

    Usart, Mireia; Romero, Margarida

    2014-01-01

    Introduction: The study of "Time Orientation" (TO) has been focused on how to measure this construct and its effects on human behavior. Defined as a fundamental psychological variable, TO is multidimensional, sensible to cultural differences and age. Although its relation to learning, it deserves further study in the different Higher…

  6. Productivity, Performance and Return on Investment: A Baseline Analysis of Tennessee Public Institutions of Higher Education

    Science.gov (United States)

    Tennessee Higher Education Commission, 2010

    2010-01-01

    Tennessee needs to continuously increase its degree productivity by four percent every year from now until 2025. In the midst of this need for increased degree production, the state's current economic realities indicate public institutions will receive little to no new state appropriated revenues for the foreseeable future. The Master Plan Annual…

  7. Results of a pilot scale melter test to attain higher production rates

    International Nuclear Information System (INIS)

    Elliott, M.L.; Perez, J.M. Jr.; Chapman, C.C.

    1991-01-01

    A pilot-scale melter test was completed as part of the effort to enhance glass production rates. The experiment was designed to evaluate the effects of bulk glass temperature and feed oxide loading. The maximum glass production rate obtained, 86 kg/hr-m 2 , was over 200% better than the previous record for the melter used

  8. Achieving higher productivity of UO2 fuel at NUOFP through improved in-plant quality surveillance

    International Nuclear Information System (INIS)

    Meena, R.; Pramanik, D.; Sairam, S.; Rajkumar, J.V.; Rao, R.V.R.L.V.; Sinha, T.K.; Santra, N.; Rao, G.V.S.H.; Jayaraj, R.N.

    2009-01-01

    At Nuclear Fuel Complex (NFC), in the production of UO 2 fuel for PHWRs, a standard set of process parameters are monitored regularly for every lot of powder and pellet. Quality of intermediate products in the production process like UNP, ADU(dry), U 3 O 8 , UO 2+x , UO 2 granules, green pellets, sintered pellets are also regularly analysed/monitored apart from the final finished pellet and ensured to be within specified range. This range is decided by final product specifications and sometimes also based on the feed requirement in the next process in the downstream of the flow sheet. Vast experience gained over the years, behavior of various equipment under given set of conditions, feed back from the customer plants etc; have been primary criteria hither to, for defining the process conditions and chemical/physical properties of intermediate products

  9. Real time information management for improving productivity in metallurgical complexes

    International Nuclear Information System (INIS)

    Bascur, O.A.; Kennedy, J.P.

    1999-01-01

    Applying the latest information technologies in industrial plants has become a serious challenge to management and technical teams. The availability of real time and historical operations information to identify the most critical part of the processing system from mechanical integrity is a must for global plant optimization. Expanded use of plant information on the desktop is a standard tool for revenue improvement, cost reduction, and adherence to production constraints. The industrial component desktop supports access to information for process troubleshooting, continuous improvement and innovation by plant and staff personnel. Collaboration between groups enables the implementation of an overall process effectiveness index based on losses due to equipment availability, production and product quality. The key to designing technology is to use the Internet based technologies created by Microsoft for its marketplace-office automation and the Web. Time derived variables are used for process analysis, troubleshooting and performance assessment. Connectivity between metallurgical complexes, research centers and their business system has become a reality. Two case studies of large integrated mining/metallurgical complexes are highlighted. (author)

  10. Time series analysis of gold production in Malaysia

    Science.gov (United States)

    Muda, Nora; Hoon, Lee Yuen

    2012-05-01

    Gold is a soft, malleable, bright yellow metallic element and unaffected by air or most reagents. It is highly valued as an asset or investment commodity and is extensively used in jewellery, industrial application, dentistry and medical applications. In Malaysia, gold mining is limited in several areas such as Pahang, Kelantan, Terengganu, Johor and Sarawak. The main purpose of this case study is to obtain a suitable model for the production of gold in Malaysia. The model can also be used to predict the data of Malaysia's gold production in the future. Box-Jenkins time series method was used to perform time series analysis with the following steps: identification, estimation, diagnostic checking and forecasting. In addition, the accuracy of prediction is tested using mean absolute percentage error (MAPE). From the analysis, the ARIMA (3,1,1) model was found to be the best fitted model with MAPE equals to 3.704%, indicating the prediction is very accurate. Hence, this model can be used for forecasting. This study is expected to help the private and public sectors to understand the gold production scenario and later plan the gold mining activities in Malaysia.

  11. Higher Prevalence of Left-Handedness in Twins? Not After Controlling Birth Time Confounders.

    Science.gov (United States)

    Heikkilä, Kauko; Vuoksimaa, Eero; Saari-Kemppainen, Aulikki; Kaprio, Jaakko; Rose, Richard J; Haukka, Jari; Pitkäniemi, Janne; Iivanainen, Matti

    2015-10-01

    Pregnancy- and birth-related factors may have an effect on handedness. Compared with singletons, twins have a lower birth weight, shorter gestational age, and are at higher risk for birth complications. We tested whether the prevalence of left-handedness is higher among twins than singletons, and if so, whether that difference is fully explained by pregnancy and birth-related differences between twins and singletons. We analyzed Finnish population-based datasets; included were 8,786 twins and 5,892 singletons with information on birth weight (n = 12,381), Apgar scores (n = 11,129), and gestational age (n = 11,811). Two twin cohorts were involved: FinnTwin12 included twins born during 1983-1987, and FinnTwin16 included twins born during 1974-1979. We had two comparison groups of singletons: 4,101 individuals born during 1986-1988 and enrolled in the Helsinki Ultrasound Trial, and 1,791 individuals who were partners of FinnTwin16 twins. We used logistic regression models with writing hand as the outcome for comparison and evaluating effects of covariates. Left-handedness was more common in twins (9.67%) than in singletons (8.27%; p = .004). However, Apgar scores were associated with handedness, and after controlling for covariates, we found no difference in the prevalence of left-handedness between twins and singletons. Increased left-handedness among twins, often reported by others, was evident in our data, but only among our older twin cohorts, and that association disappeared after removing effects of perinatal covariates.

  12. TIME MANAGEMENT AND ITS IMPLEMENTATION AT PRODUCTION COMPANIES

    Directory of Open Access Journals (Sweden)

    Yurii Safonov

    2017-11-01

    Full Text Available The purpose and objectives. Time management is still not a very popular element in many enterprises, while its implementation significantly increases staff productivity and, ultimately, the effectiveness of the company. For this reason, the purpose of the article is to promote time management in a business environment by providing specific tools, principles, methods and systems, and to show its importance to the company and describe the influence of time management for the enterprise. Methods. The study used a generalization, systematization, empirical research, systematic and logical approach to the development of theoretical and methodological provisions for instrumental support management performance of the industrial enterprise. Results. Time management is one of the most important strategic tools of the modern manager. It can help both existing companies and companies that are just launched (the project. Practical implications. The current goal of time management as a mechanism to improve the efficiency of the company. Value/originality. To implement it, the company offered a popular time management system, allowing the company to increase the effectiveness of its activities.

  13. Production of higher quality bio-oils by in-line esterification of pyrolysis vapor

    Science.gov (United States)

    Hilten, Roger Norris; Das, Keshav; Kastner, James R; Bibens, Brian P

    2014-12-02

    The disclosure encompasses in-line reactive condensation processes via vapor phase esterification of bio-oil to decease reactive species concentration and water content in the oily phase of a two-phase oil, thereby increasing storage stability and heating value. Esterification of the bio-oil vapor occurs via the vapor phase contact and subsequent reaction of organic acids with ethanol during condensation results in the production of water and esters. The pyrolysis oil product can have an increased ester content and an increased stability when compared to a condensed pyrolysis oil product not treated with an atomized alcohol.

  14. Method for Hot Real-Time Sampling of Gasification Products

    Energy Technology Data Exchange (ETDEWEB)

    Pomeroy, Marc D [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-09-29

    The Thermochemical Process Development Unit (TCPDU) at the National Renewable Energy Laboratory (NREL) is a highly instrumented half-ton/day pilot scale plant capable of demonstrating industrially relevant thermochemical technologies from lignocellulosic biomass conversion, including gasification. Gasification creates primarily Syngas (a mixture of Hydrogen and Carbon Monoxide) that can be utilized with synthesis catalysts to form transportation fuels and other valuable chemicals. Biomass derived gasification products are a very complex mixture of chemical components that typically contain Sulfur and Nitrogen species that can act as catalysis poisons for tar reforming and synthesis catalysts. Real-time hot online sampling techniques, such as Molecular Beam Mass Spectrometry (MBMS), and Gas Chromatographs with Sulfur and Nitrogen specific detectors can provide real-time analysis providing operational indicators for performance. Sampling typically requires coated sampling lines to minimize trace sulfur interactions with steel surfaces. Other materials used inline have also shown conversion of sulfur species into new components and must be minimized. Sample line Residence time within the sampling lines must also be kept to a minimum to reduce further reaction chemistries. Solids from ash and char contribute to plugging and must be filtered at temperature. Experience at NREL has shown several key factors to consider when designing and installing an analytical sampling system for biomass gasification products. They include minimizing sampling distance, effective filtering as close to source as possible, proper line sizing, proper line materials or coatings, even heating of all components, minimizing pressure drops, and additional filtering or traps after pressure drops.

  15. Reduced Production of Higher Alcohols by Saccharomyces cerevisiae in Red Wine Fermentation by Simultaneously Overexpressing BAT1 and Deleting BAT2.

    Science.gov (United States)

    Ma, Lijuan; Huang, Shiyong; Du, Liping; Tang, Ping; Xiao, Dongguang

    2017-08-16

    In red wine, the contents of higher alcohols and ethyl carbamate (EC) are two significant health concerns. To reduce the production of higher alcohols by wine yeast YZ22 with low production of EC, one BAT2 was replaced by a BAT1 expression cassette first and then another BAT2 was deleted to obtain the mutant SYBB3. Real-time quantitative PCR showed that the relative expression level of BAT1 in SYBB3 improved 28 times compared with that in YZ22. The yields of isobutanol and 3-methyl-1-butanol produced by mutant SYBB3 reduced by 39.41% and 37.18% compared to those by the original strain YZ22, and the total production of higher alcohols decreased from 463.82 mg/L to 292.83 mg/L in must fermentation of Cabernet Sauvignon. Meanwhile, there were no obvious differences on fermentation characteristics of the mutant and parental strain. This research has suggested an effective strategy for decreasing production of higher alcohols in Saccharomyces cerevisiae.

  16. Higher Volume at Time of Breast Conserving Surgery Reduces Re-Excision in DCIS

    Directory of Open Access Journals (Sweden)

    J. H. Wolf

    2011-01-01

    Full Text Available Purpose. The purpose of this study was to compare the surgical and pathological variables which impact rate of re-excision following breast conserving therapy (BCS with or without concurrent additional margin excision (AM. Methods. The pathology database was queried for all patients with DCIS from January 2004 to September 2008. Pathologic assessment included volume of excision, subtype, size, distance from margin, grade, necrosis, multifocality, calcifications, and ER/PR status. Results. 405 cases were identified and 201 underwent BCS, 151-BCS-AM, and 53-mastectomy. Among the 201 BCS patients, 190 underwent re-excision for close or involved margins. 129 of these were treated with BCS and 61 with BCS-AM (P<.0001. The incidence of residual DCIS in the re-excision specimens was 32% (n=65 for BCS and 22% (n=33 for BCS-AM (P<.05. For both the BCS and the BCS-AM cohorts, volume of tissue excised is inversely correlated to the rate of re-excision (P=.0284. Multifocality (P=.0002 and ER status (P=.0382 were also significant predictors for rate of re-excision and variation in surgical technique was insignificant. Conclusions. The rate of positive margins, re-excision, and residual disease was significantly higher in patients with lower volume of excision. The performance of concurrent additional margin excision increases the efficacy of BCS for DCIS.

  17. Assessment of Multiple GNSS Real-Time SSR Products from Different Analysis Centers

    Directory of Open Access Journals (Sweden)

    Zhiyu Wang

    2018-03-01

    Full Text Available The real-time State Space Representation (SSR product of the GNSS (Global Navigation Satellite System orbit and clock is one of the most essential corrections for real-time precise point positioning (PPP. In this work, the performance of current SSR products from eight analysis centers were assessed by comparing it with the final product and the accuracy of real-time PPP. Numerical results showed that (1 the accuracies of the GPS SSR product were better than 8 cm for the satellite orbit and 0.3 ns for the satellite clock; (2 the accuracies of the GLONASS (GLObalnaya NAvigatsionnaya Sputnikovaya Sistema SSR product were better than 10 cm for orbit RMS (Root Mean Square and 0.6 ns for clock STD (Standard Deviation; and (3 the accuracies of the BDS (BeiDou Navigation Satellite System and Galileo SSR products from CLK93 were about 14.54 and 4.42 cm for the orbit RMS and 0.32 and 0.18 ns for the clock STD, respectively. The simulated kinematic PPP results obtained using the SSR products from CLK93 and CLK51 performed better than those using other SSR products; and the accuracy of PPP based on all products was better than 6 and 10 cm in the horizontal and vertical directions, respectively. The real-time kinematic PPP experiment carried out in Beijing, Tianjin, and Shijiazhuang, China indicated that the SSR product CLK93 from Centre National d’Etudes Spatiales (CNES had a better performance than CAS01. Moreover, the PPP with GPS + BDS dual systems had a higher accuracy than those with only a GPS single system.

  18. Monitoring crop leaf area index time variation from higher resolution remotely sensed data

    International Nuclear Information System (INIS)

    Jiao, Sihong

    2014-01-01

    The leaf area index (LAI) is significant for research on global climate change and ecological environment. China HJ-1 satellite has a revisit cycle of four days, providing CCD data (HJ-1 CCD) with a resolution of 30 m. However, the HJ-1 CCD is incapable of obtaining observations at multiple angles. This is problematic because single angle observations provide insufficient data for determining the LAI. This article proposes a new method for determining LAI using HJ-1 CCD data. The proposed method uses background knowledge of dynamic land surface processes that are extracted from MODerate resolution Imaging Spectroradiometer (MODIS) LAI 1-km resolution data. To process the uncertainties that arise from using two data sources with different spatial resolutions, the proposed method is implemented in a dynamitic Bayesian network scheme by integrating a LAI dynamic process model and a canopy reflectance model with remotely sensed data. Validation results showed that the determination coefficient between estimated and measured LAI was 0.791, and the RMSE was 0.61. This method can enhance the accuracy of the retrieval results while retaining the time series variation characteristics of the vegetation LAI. The results suggest that this algorithm can be widely applied to determining high-resolution leaf area indices using data from China HJ-1 satellite even if information from single angle observations are insufficient for quantitative application

  19. Production of pizza dough with reduced fermentation time

    Directory of Open Access Journals (Sweden)

    Simone Limongi

    2012-12-01

    Full Text Available The aim of this study was to reduce the fermentation time of pizza dough by evaluating the development of the dough during fermentation using a Chopin® rheofermentometer and verifying the influence of time and temperature using a 2² factorial design. The focus was to produce characteristic soft pizza dough with bubbles and crispy edges and soft in the center. These attributes were verified by the Quantitative Descriptive Analysis (QDA. The dough was prepared with the usual ingredients, fermented at a temperature range from 27 to 33 ºC for 30 to 42 minutes, enlarged, added with tomato sauce, baked, and frozen. The influence of the variables time and temperature on the release of carbon dioxide (H'm was confirmed with positive and significant effect, using a rheofermentometer, which was not observed for the development or maximum height of the dough (Hm. The same fermentation conditions of the experimental design were used for the production of the pizza dough in the industrial process; it was submitted to Quantitative Descriptive Analysis (QDA, in which the samples were described by nine attributes. The results showed that some samples had the desired characteristics of pizza dough, demonstrated by the principal component analysis (PCA, indicating a 30 % fermentation time reduction when compared to the conventional process.

  20. Evaluation of Oral Production Learning Outcomes for Higher Education in Spain

    Science.gov (United States)

    Pierce, Joana; Robisco, Maria del Mar

    2010-01-01

    Higher education institutions across Europe are currently involved in a major process of reforming and restructuring as part of the Bologna process which stresses the role of competences and outcomes in curriculum design. This paper reports on the findings of a research project whose purpose was to assess the clarity and the appropriate…

  1. Access Denied: Ending the Exclusion of Disabled Students from Media Production Courses in Higher Education

    Science.gov (United States)

    Cubbage, Jayne

    2017-01-01

    As the acceptance of media literacy increases among educators, media producers and consumers, one group is often missing from the dialogue--persons with disabilities. This absence is witnessed in the marginalized media depictions of the disabled. To gain entry into the media professions, some form of higher education is required. Using muted group…

  2. How Tenure in Higher Education Relates to Faculty Productivity and Retention

    Science.gov (United States)

    Manjounes, Cindy Kay

    2016-01-01

    Some public university systems are considering abolishing tenure as a cost-saving mechanism, but little is known about how this change may impact organizational outcomes related to faculty retention and research productivity. Using Almendarez' human capital theory, the purpose of this concurrent mixed methods study was to explore how tenure…

  3. CEBAF at higher energies: Working group report on hadron spectroscopy and production

    Energy Technology Data Exchange (ETDEWEB)

    Barnes, T. [Oak Ridge National Laboratory, TN (United States)]| [Univ. of Tennessee, Knoxville (United States); Napolitano, J. [Rensselaer Polytechnic Inst., Troy, NY (United States)

    1994-04-01

    This report summarizes topics in hadron spectroscopy and production which could be addressed at CEBAF with an energy upgrade to E{sub {gamma}} = 8 GeV and beyond. The topics discussed include conventional meson and baryon spectrocopy, spectroscopy of exotica (especially molecules and hybrids), CP and CPT tests using {phi} mesons, and new detector and accelerator options.

  4. Simulation of quitting smoking in the military shows higher lifetime medical spending more than offset by productivity gains.

    Science.gov (United States)

    Yang, Wenya; Dall, Timothy M; Zhang, Yiduo; Zhang, Shiping; Arday, David R; Dorn, Patricia W; Jain, Anjali

    2012-12-01

    Despite the documented benefits of quitting smoking, studies have found that smokers who quit may have higher lifetime medical costs, in part because of increased risk for medical conditions, such as type 2 diabetes, brought on by associated weight gain. Using a simulation model and data on 612,332 adult smokers in the US Department of Defense's TRICARE Prime health plan in 2008, we estimated that cessation accompanied by weight gain would increase average life expectancy by 3.7 years, and that the average lifetime reduction in medical expenditures from improved health ($5,600) would be offset by additional expenditures resulting from prolonged life ($7,300). Results varied by age and sex: For females ages 18-44 at time of cessation, there would be net savings of $1,200 despite additional medical expenditures from prolonged life. Avoidance of weight gain after quitting smoking would increase average life expectancy by four additional months and reduce mean extra spending resulting from prolonged life by $700. Overall, the average net lifetime health care cost increase of $1,700 or less per ex-smoker would be modest and, for employed people, more than offset by even one year's worth of productivity gains. These results boost the case for smoking cessation programs in the military in particular, along with not selling cigarettes in commissaries or at reduced prices.

  5. Productivity analysis to overcome the limited availability of production time in SME FBS

    Science.gov (United States)

    Nurhasanah, N.; Jingga; Aribowo, B.; Gayatri, AM; Mardhika, DA; Tanjung, WN; Suri, QA; Safitri, R.; Supriyanto, A.

    2017-12-01

    Good industrial development should pay attention to the human factor as the main driver. Condition of work procedures, work area, and environment can affect the production result because if not optimal, the production will run slowly. If the work system is less than optimal, the productivity will do so, the operator will work uncomfortably and be easy to undergo work fatigue, even it can cause work accidents. Thus, the optimal and ergonomic arrangement of the the overall work system mechanism and work environment design is required for workers to work well, regularly, safely and comfortably with the aim of improving work productivity. This research measures the performance in textile SME (Small and Medium Enterprise) located in Sukabumi which is SME FBS which produces children’s clothing. This performance measurement is aimed at improving the competitiveness of the textile IKM so that it has the equal competitiveness with other SMEs or with textile industries that already have their name in market. Based on the method of hour standard time and TOC calculation at 2 FBS CMT (Cut-Make-Trim) in Sukabumi, which are the CMT Margaluyu Village and CMT Purabaya Village, the result is that the standard time of shirt work on CMT Margaluyu Village is less than that of CMT Desa Purabaya. It can be seen that more effective in SME FBS production is by process method.

  6. Higher demand and production in 2004, but growth wavers in 2005 : markets for paper, paperboard and woodpulp, 2004-2005

    Science.gov (United States)

    Peter J. Ince; Eduard Akim; Bernard Lombard; Tomas Parik

    2005-01-01

    Global pulp, paper and paperboard markets improved in 2004 and 2005, as indicated by generally higher prices for most pulp, paper and paperboard products in comparison with 2003. While growth in demand was quite robust in 2004, by the end of the first half of 2005, markets appeared more hesitant and prices appeared to waver or reach a plateau. Within the UNECE region,...

  7. Using Stakeholder Marketing and Social Responsibility for New Product Development in Higher Education: A Business Spanish Model

    Science.gov (United States)

    Huempfner, Lisa; Kopf, Dennis A.

    2017-01-01

    Higher education administrators are often faced with difficult choices in allocating limited resources for the creation of new programs. The purpose of this article is to explore the suitability of a new product, an integrated business Spanish major, by applying stakeholder marketing. In so doing, it provides a framework for the application of…

  8. Continuous fermentation and in-situ reed separation of butyric acid for higher sugar consumption rate and productivity

    DEFF Research Database (Denmark)

    Baroi, George Nabin; Skiadas, Ioannis; Westermann, Peter

    that disconnection of the REED system resulted to much lower (48 and 83% for glucose and xylose, respectively) sugars consumption rates and consequently lower butyric acid production rates. It was also noticeable that continuous operation, even without the REED system, resulted to higher glucose consumption rates...

  9. Strategic WIP Inventory Positioning for Make-to-Order Production with Stochastic Processing Times

    Directory of Open Access Journals (Sweden)

    Jingjing Jiang

    2017-01-01

    Full Text Available It is vital for make-to-order manufacturers to shorten the lead time to meet the customers’ requirements. Holding work-in-process (WIP inventory at more stations can reduce the lead time, but it also brings about higher inventory holding cost. Therefore, it is important to seek out the optimal set of stations to hold WIP inventory to minimize the total inventory holding cost, while meeting the required due date for the final product at the same time. Since the problem with deterministic processing times at the stations has been addressed, as a natural extension, in this study, we address the problem with stochastic processing times, which is more realistic in the manufacturing environment. Assuming that the processing times follow normal distributions, we propose a solution procedure using genetic algorithm.

  10. Higher order corrections to mixed QCD-EW contributions to Higgs boson production in gluon fusion

    Science.gov (United States)

    Bonetti, Marco; Melnikov, Kirill; Tancredi, Lorenzo

    2018-03-01

    We present an estimate of the next-to-leading-order (NLO) QCD corrections to mixed QCD-electroweak contributions to the Higgs boson production cross section in gluon fusion, combining the recently computed three-loop virtual corrections and the approximate treatment of real emission in the soft approximation. We find that the NLO QCD corrections to the mixed QCD-electroweak contributions are nearly identical to NLO QCD corrections to QCD Higgs production. Our result confirms an earlier estimate of these O (α αs2) effects by Anastasiou et al. [J. High Energy Phys. 04 (2009) 003, 10.1088/1126-6708/2009/04/003] and provides further support for the factorization approximation of QCD and electroweak corrections.

  11. Engineering plastid fatty acid biosynthesis to improve food quality and biofuel production in higher plants.

    Science.gov (United States)

    Rogalski, Marcelo; Carrer, Helaine

    2011-06-01

    The ability to manipulate plant fatty acid biosynthesis by using new biotechnological approaches has allowed the production of transgenic plants with unusual fatty acid profile and increased oil content. This review focuses on the production of very long chain polyunsaturated fatty acids (VLCPUFAs) and the increase in oil content in plants using molecular biology tools. Evidences suggest that regular consumption of food rich in VLCPUFAs has multiple positive health benefits. Alternative sources of these nutritional fatty acids are found in cold-water fishes. However, fish stocks are in severe decline because of decades of overfishing, and also fish oils can be contaminated by the accumulation of toxic compounds. Recently, there is also an increase in oilseed use for the production of biofuels. This tendency is partly associated with the rapidly rising costs of petroleum, increased concern about the environmental impact of fossil oil and the attractive need to develop renewable sources of fuel. In contrast to this scenario, oil derived from crop plants is normally contaminant free and less environmentally aggressive. Genetic engineering of the plastid genome (plastome) offers a number of attractive advantages, including high-level foreign protein expression, marker-gene excision and transgene containment because of maternal inheritance of plastid genome in most crops. Here, we describe the possibility to improve fatty acid biosynthesis in plastids, production of new fatty acids and increase their content in plants by genetic engineering of plastid fatty acid biosynthesis via plastid transformation. © 2011 The Authors. Plant Biotechnology Journal © 2011 Society for Experimental Biology, Association of Applied Biologists and Blackwell Publishing Ltd.

  12. The isolation and improvement of Aspergillus niger by radiation for higher production of citric acid

    International Nuclear Information System (INIS)

    Radziah A; Foziah Ali; Zainab H

    2000-01-01

    Local citric acid producer of fungal strain Aspergillus niger have been successfully isolated from stale bread and onion. The isolates, designated as SB 1 and NN I showed a potential performance for citric acid production of 49% and 52% yield respectively, in shake flask studies. The strain improvement on NN1 was carried out by radiation induced mutation by gamma rays at LD 5 0 of 1.28 kGy

  13. Novel thermostable clostridial strains through protoplast fusion for enhanced biobutanol production at higher temperature—preliminary study

    Directory of Open Access Journals (Sweden)

    Muhammad Ferhan

    2016-01-01

    Full Text Available The objective of this study is to improve the thermal stability of clostridium strains for enhanced biobutanol production. Thermostable clostridia species were developed through protoplast fusion between mesophilic clostridial species (i.e., Clostridium beijerinckii and Clostridium acetobutylicum and thermophilic clostridial species (i.e., Clostridium thermocellum. Production of biobutanol was examined in the present preliminary study using the clostridium strains and their protoplast fusants using sugar mixture with composition identical to that of wheat straw acid hydrolysate. Maximum biobutanol production of 9.4 g/L was achieved by a fused strain at 45 °C with total sugar consumption of 66% compared to that at 35 °C (i.e., 8.4 g/L production and 64% total sugar consumption. Glucose and xylose uptake rates were generally higher compared to all other individual sugars in the feedstock. In general, average cell concentrations were in close proximity for all parenting and fused strains at 35 °C; i.e., in the range of 5.12 × 107 to 5.49 × 107 cells/mL. Average cell concentration of fusants between the mesophilic clostridial species and the thermophilic clostridial species slightly increased to ~ 5.62 × 107 cells/mL at a higher temperature of 45 °C. These results, in addition to the ones obtained for the butanol production, demonstrate enhanced thermal stability of both fusants at a higher temperature (45 °C.

  14. Assimilation of LAI time-series in crop production models

    Science.gov (United States)

    Kooistra, Lammert; Rijk, Bert; Nannes, Louis

    2014-05-01

    Agriculture is worldwide a large consumer of freshwater, nutrients and land. Spatial explicit agricultural management activities (e.g., fertilization, irrigation) could significantly improve efficiency in resource use. In previous studies and operational applications, remote sensing has shown to be a powerful method for spatio-temporal monitoring of actual crop status. As a next step, yield forecasting by assimilating remote sensing based plant variables in crop production models would improve agricultural decision support both at the farm and field level. In this study we investigated the potential of remote sensing based Leaf Area Index (LAI) time-series assimilated in the crop production model LINTUL to improve yield forecasting at field level. The effect of assimilation method and amount of assimilated observations was evaluated. The LINTUL-3 crop production model was calibrated and validated for a potato crop on two experimental fields in the south of the Netherlands. A range of data sources (e.g., in-situ soil moisture and weather sensors, destructive crop measurements) was used for calibration of the model for the experimental field in 2010. LAI from cropscan field radiometer measurements and actual LAI measured with the LAI-2000 instrument were used as input for the LAI time-series. The LAI time-series were assimilated in the LINTUL model and validated for a second experimental field on which potatoes were grown in 2011. Yield in 2011 was simulated with an R2 of 0.82 when compared with field measured yield. Furthermore, we analysed the potential of assimilation of LAI into the LINTUL-3 model through the 'updating' assimilation technique. The deviation between measured and simulated yield decreased from 9371 kg/ha to 8729 kg/ha when assimilating weekly LAI measurements in the LINTUL model over the season of 2011. LINTUL-3 furthermore shows the main growth reducing factors, which are useful for farm decision support. The combination of crop models and sensor

  15. Implementation of Releasing Time to Care - the productive ward.

    Science.gov (United States)

    Wilson, Gwyneth

    2009-07-01

    This paper describes the implementation of the NHS Institute for Innovation and Improvement Productive Ward - releasing time to care programme. It will discuss the benefits and key successes and provides advice for those wishing to implement the programme. In Lord Darzi's Next Stage Review, he advocates an ambitious vision of patient centred - clinician led, locally driven NHS. The Releasing Time to Care programme is a unique opportunity for everyone working within the NHS to improve effectiveness, safety and reliability of the services we provide. Whilst being situated within a National Health Service policy environment learning from this work can be translated nationally and internationally, as the principles underpin the provision of high quality care. Evaluation is currently in relation to each of the 15 modules rather than as the programme as a whole. It uses various methods including audit, observation, activity follow through, satisfaction surveys and process mapping. Each month data is colated for each of the 11 metrics which has shown a reduction in falls, drug administration errors and improvement in the recording of patient observations. One of the key issues is that an essential component for the success of the programme lies in the tangible support of the Trust Board/Board of Directors. Evidence shows that this programme improves patient satisfaction as it enables the provision of an increase in direct patient care by staff and subsequently improved clinical and safety outcomes. Ward Sister/Charge Nurse development includes Leadership, Project management and Lean Methodology techniques. The Releasing Time to Care programme is a key component of the Next Stage Review. It will create productive organisations by being a catalyst for the transformation of Trust services, enabling staff to spend more time caring for patients and users. This release in time will result in better outcomes and subsequent improvement with patient and staff satisfaction and

  16. The effect of Maillard reaction products and yeast strain on the synthesis of key higher alcohols and esters in beer fermentations.

    Science.gov (United States)

    Dack, Rachael E; Black, Gary W; Koutsidis, Georgios; Usher, St John

    2017-10-01

    The effect of Maillard reaction products (MRPs), formed during the production of dark malts, on the synthesis of higher alcohols and esters in beer fermentations was investigated by headspace solid-phase microextraction GC-MS. Higher alcohol levels were significantly (p<0.05) higher in dark malt fermentations, while the synthesis of esters was inhibited, due to possible suppression of enzyme activity and/or gene expression linked to ester synthesis. Yeast strain also affected flavour synthesis with Saccharomyces cerevisiae strain A01 producing considerably lower levels of higher alcohols and esters than S288c and L04. S288c produced approximately double the higher alcohol levels and around twenty times more esters compared to L04. Further investigations into malt type-yeast strain interactions in relation to flavour development are required to gain better understanding of flavour synthesis that could assist in the development of new products and reduce R&D costs for the industry. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Exploring Mediating and Moderating Influences on the Links between Cycle Time, Proficiency in Entry Timing and New Product Profitability

    NARCIS (Netherlands)

    Langerak, F.; Hultink, E.J.; Griffin, A.

    2006-01-01

    Development cycle time is the elapsed time from the beginning of idea generation to the moment that the new product is ready for market introduction. Market entry timing is contingent upon the new product’s cycle time. Only when the product is completed can a firm decide whether and when to enter

  18. Immobilisation of Higher Activity Wastes from Nuclear Reactor Production of 99Mo

    Directory of Open Access Journals (Sweden)

    Martin W. A. Stewart

    2013-01-01

    Full Text Available A variety of intermediate- and low-level liquid and solid wastes are produced from reactor production of 99Mo using UAl alloy or UO2 targets and in principle can be collectively or individually converted into waste forms. At ANSTO, we have legacy acidic uranyl-nitrate-rich intermediate level waste (ILW from the latter, and an alkaline liquid ILW, a U-rich filter cake, plus a shorter lived liquid stream that rapidly decays to low-level waste (LLW standards, from the former. The options considered consist of cementitious products, glasses, glass-ceramics, or ceramics produced by vitrification or hot isostatic pressing for intermediate-level wastes. This paper discusses the progress in waste form development and processing to treat ANSTO’s ILW streams arising from 99Mo. The various waste forms and the reason for the process option chosen will be reviewed. We also address the concerns over adapting our chosen process for use in a hot-cell environment.

  19. Time-dependent histamine release from stored human blood products

    DEFF Research Database (Denmark)

    Nielsen, Hans Jørgen; Edvardsen, L; Vangsgaard, K

    1996-01-01

    storage. Whole blood (six units), plasma-reduced whole blood (six units), and plasma- and buffy coat-reduced (saline-adenine-glucose-mannitol) (SAGM) blood (six units) from unpaid healthy donors were stored in the blood bank for 35 days at 4 degrees C. Plasma histamine and total cell-bound histamine......Perioperative transfusion of whole blood has been shown to amplify trauma-induced immunosuppression, which could be attenuated by perioperative administration of histamine2 receptor antagonists. Supernatants from different blood products were, therefore, analysed for histamine content during.......0 (range 176.0-910.0) nmol/l in whole blood and 475.0 (range 360.0-1560.0) nmol/l in plasma-reduced whole blood, while it was undetectable in SAGM blood. Spontaneous histamine release increased in a time-dependent manner from a median of 6.7 (range 2.2-17.4) nmol/l at the time of storage to 175.0 (range 33...

  20. Higher Endogenous Glucose Production during OGTT vs Isoglycemic Intravenous Glucose Infusion

    DEFF Research Database (Denmark)

    Lund, Asger; Bagger, Jonatan I; Christensen, Mikkel Bring

    2016-01-01

    CONTEXT: Oral glucose ingestion elicits a larger insulin response and delayed suppression of glucagon compared to isoglycemic intravenous (iv) glucose infusion (IIGI). OBJECTIVE: We studied whether these differences translate into effects on endogenous glucose production (EGP) and glucose disposal......); HbA1c 53.8 ± 11.0 mmol/mol; duration of diabetes 9.2 ± 5.0 years) and 10 matched non-diabetic control subjects (age 56.0±10.7 years; BMI 29.8 ± 2.9 kg/m(2); HbA1c 33.8 ± 5.5 mmol/mol) Interventions: Three experimental days: 75 g-oral glucose tolerance test (OGTT), IIGI and IIGI+glucagon (IIGI...

  1. Phase transitions between lower and higher level management learning in times of crisis: an experimental study based on synergetics.

    Science.gov (United States)

    Liening, Andreas; Strunk, Guido; Mittelstadt, Ewald

    2013-10-01

    Much has been written about the differences between single- and double-loop learning, or more general between lower level and higher level learning. Especially in times of a fundamental crisis, a transition between lower and higher level learning would be an appropriate reaction to a challenge coming entirely out of the dark. However, so far there is no quantitative method to monitor such a transition. Therefore we introduce theory and methods of synergetics and present results from an experimental study based on the simulation of a crisis within a business simulation game. Hypothesized critical fluctuations - as a marker for so-called phase transitions - have been assessed with permutation entropy. Results show evidence for a phase transition during the crisis, which can be interpreted as a transition between lower and higher level learning.

  2. New product development projects evaluation under time uncertainty

    Directory of Open Access Journals (Sweden)

    Thiago Augusto de Oliveira Silva

    2009-12-01

    Full Text Available The development time is one of the key factors that contribute to the new product development success. In spite of that, the impact of the time uncertainty on the development has been not fully exploited, as far as decision supporting models to evaluate this kind of projects is concerned. In this context, the objective of the present paper is to evaluate the development process of new technologies under time uncertainty. We introduce a model which captures this source of uncertainty and develop an algorithm to evaluate projects that incorporates Monte Carlo Simulation and Dynamic Programming. The novelty in our approach is to thoroughly blend the stochastic time with a formal approach to the problem, which preserves the Markov property. We base our model on the distinction between the decision epoch and the stochastic time. We discuss and illustrate the applicability of our model through an empirical example.O tempo de desenvolvimento é um dos fatores-chave que contribuem para o sucesso do desenvolvimento de novos produtos. Apesar disso, o impacto da incerteza de tempo no desenvolvimento tem sido pouco considerado em modelos de avaliação e valoração deste tipo de projetos. Neste contexto, este trabalho tem como objetivo avaliar projetos de desenvolvimento de novas tecnologias mediante o tempo incerto. Introduzimos um modelo capaz de captar esta fonte de incerteza e desenvolvemos um algoritmo para a valoração do projeto que integra Simulação de Monte Carlo e Programação Dinâmica. A novidade neste trabalho é conseguir integrar meticulosamente o tempo estocástico a uma estrutura formal para tomada de decisão que preserva a propriedade de Markov. O principal ponto para viabilizar este fato é distinção entre o momento de revisão e o tempo estocástico. Ilustramos e discutimos a aplicabilidade deste modelo por meio de um exemplo empírico.

  3. Redfield Ratios in Inland Waters: Higher Biological Control of C:N:P Ratios in Tropical Semi-arid High Water Residence Time Lakes

    Directory of Open Access Journals (Sweden)

    Ng H. They

    2017-08-01

    Full Text Available The canonical Redfield C:N:P ratio for algal biomass is often not achieved in inland waters due to higher C and N content and more variability when compared to the oceans. This has been attributed to much lower residence times and higher contributions of the watershed to the total organic matter pool of continental ecosystems. In this study we examined the effect of water residence times in low latitude lakes (in a gradient from humid to a semi-arid region on seston elemental ratios in different size fractions. We used lake water specific conductivity as a proxy for residence time in a region of Eastern Brazil where there is a strong precipitation gradient. The C:P ratios decreased in the seston and bacterial size-fractions and increased in the dissolved fraction with increasing water retention time, suggesting uptake of N and P from the dissolved pool. Bacterial abundance, production and respiration increased in response to increased residence time and intracellular nutrient availability in agreement with the growth rate hypothesis. Our results reinforce the role of microorganisms in shaping the chemical environment in aquatic systems particularly at long water residence times and highlights the importance of this factor in influencing ecological stoichiometry in all aquatic ecosystems.

  4. Online Time Series Analysis of Land Products over Asia Monsoon Region via Giovanni

    Science.gov (United States)

    Shen, Suhung; Leptoukh, Gregory G.; Gerasimov, Irina

    2011-01-01

    Time series analysis is critical to the study of land cover/land use changes and climate. Time series studies at local-to-regional scales require higher spatial resolution, such as 1km or less, data. MODIS land products of 250m to 1km resolution enable such studies. However, such MODIS land data files are distributed in 10ox10o tiles, due to large data volumes. Conducting a time series study requires downloading all tiles that include the study area for the time period of interest, and mosaicking the tiles spatially. This can be an extremely time-consuming process. In support of the Monsoon Asia Integrated Regional Study (MAIRS) program, NASA GES DISC (Goddard Earth Sciences Data and Information Services Center) has processed MODIS land products at 1 km resolution over the Asia monsoon region (0o-60oN, 60o-150oE) with a common data structure and format. The processed data have been integrated into the Giovanni system (Goddard Interactive Online Visualization ANd aNalysis Infrastructure) that enables users to explore, analyze, and download data over an area and time period of interest easily. Currently, the following regional MODIS land products are available in Giovanni: 8-day 1km land surface temperature and active fire, monthly 1km vegetation index, and yearly 0.05o, 500m land cover types. More data will be added in the near future. By combining atmospheric and oceanic data products in the Giovanni system, it is possible to do further analyses of environmental and climate changes associated with the land, ocean, and atmosphere. This presentation demonstrates exploring land products in the Giovanni system with sample case scenarios.

  5. Higher-order QCD predictions for dark matter production at the LHC in simplified models with s-channel mediators.

    Science.gov (United States)

    Backović, Mihailo; Krämer, Michael; Maltoni, Fabio; Martini, Antony; Mawatari, Kentarou; Pellen, Mathieu

    Weakly interacting dark matter particles can be pair-produced at colliders and detected through signatures featuring missing energy in association with either QCD/EW radiation or heavy quarks. In order to constrain the mass and the couplings to standard model particles, accurate and precise predictions for production cross sections and distributions are of prime importance. In this work, we consider various simplified models with s -channel mediators. We implement such models in the FeynRules/MadGraph5_aMC@NLO framework, which allows to include higher-order QCD corrections in realistic simulations and to study their effect systematically. As a first phenomenological application, we present predictions for dark matter production in association with jets and with a top-quark pair at the LHC, at next-to-leading order accuracy in QCD, including matching/merging to parton showers. Our study shows that higher-order QCD corrections to dark matter production via s -channel mediators have a significant impact not only on total production rates, but also on shapes of distributions. We also show that the inclusion of next-to-leading order effects results in a sizeable reduction of the theoretical uncertainties.

  6. Higher-order QCD predictions for dark matter production at the LHC in simplified models with s-channel mediators

    Energy Technology Data Exchange (ETDEWEB)

    Backović, Mihailo [Centre for Cosmology, Particle Physics and Phenomenology (CP3), Université catholique de Louvain, 1348, Louvain-la-Neuve (Belgium); Krämer, Michael [Institute for Theoretical Particle Physics and Cosmology, RWTH Aachen University, 52056, Aachen (Germany); Maltoni, Fabio; Martini, Antony [Centre for Cosmology, Particle Physics and Phenomenology (CP3), Université catholique de Louvain, 1348, Louvain-la-Neuve (Belgium); Mawatari, Kentarou, E-mail: kentarou.mawatari@vub.ac.be [Theoretische Natuurkunde and IIHE/ELEM, Vrije Universiteit Brussel, and International Solvay Institutes, Pleinlaan 2, 1050, Brussels (Belgium); Pellen, Mathieu [Institute for Theoretical Particle Physics and Cosmology, RWTH Aachen University, 52056, Aachen (Germany)

    2015-10-07

    Weakly interacting dark matter particles can be pair-produced at colliders and detected through signatures featuring missing energy in association with either QCD/EW radiation or heavy quarks. In order to constrain the mass and the couplings to standard model particles, accurate and precise predictions for production cross sections and distributions are of prime importance. In this work, we consider various simplified models with s-channel mediators. We implement such models in the FeynRules/MadGraph5{sub a}MC@NLO framework, which allows to include higher-order QCD corrections in realistic simulations and to study their effect systematically. As a first phenomenological application, we present predictions for dark matter production in association with jets and with a top-quark pair at the LHC, at next-to-leading order accuracy in QCD, including matching/merging to parton showers. Our study shows that higher-order QCD corrections to dark matter production via s-channel mediators have a significant impact not only on total production rates, but also on shapes of distributions. We also show that the inclusion of next-to-leading order effects results in a sizeable reduction of the theoretical uncertainties.

  7. Higher-order QCD predictions for dark matter production at the LHC in simplified models with s-channel mediators

    Energy Technology Data Exchange (ETDEWEB)

    Backovic, Mihailo; Maltoni, Fabio; Martini, Antony [Universite catholique de Louvain, Centre for Cosmology, Particle Physics and Phenomenology (CP3), Louvain-la-Neuve (Belgium); Kraemer, Michael; Pellen, Mathieu [RWTH Aachen University, Institute for Theoretical Particle Physics and Cosmology, Aachen (Germany); Mawatari, Kentarou [Theoretische Natuurkunde and IIHE/ELEM, Vrije Universiteit Brussel, and International Solvay Institutes, Brussels (Belgium)

    2015-10-15

    Weakly interacting dark matter particles can be pair-produced at colliders and detected through signatures featuring missing energy in association with either QCD/EW radiation or heavy quarks. In order to constrain the mass and the couplings to standard model particles, accurate and precise predictions for production cross sections and distributions are of prime importance. In this work, we consider various simplified models with s-channel mediators. We implement such models in the FeynRules/MadGraph5{sub a}MC rate at NLO framework, which allows to include higher-order QCD corrections in realistic simulations and to study their effect systematically. As a first phenomenological application, we present predictions for dark matter production in association with jets and with a top-quark pair at the LHC, at next-to-leading order accuracy in QCD, including matching/merging to parton showers. Our study shows that higher-order QCD corrections to dark matter production via s-channel mediators have a significant impact not only on total production rates, but also on shapes of distributions. We also show that the inclusion of next-to-leading order effects results in a sizeable reduction of the theoretical uncertainties. (orig.)

  8. Higher-order QCD predictions for dark matter production at the LHC in simplified models with s-channel mediators

    International Nuclear Information System (INIS)

    Backovic, Mihailo; Maltoni, Fabio; Martini, Antony; Kraemer, Michael; Pellen, Mathieu; Mawatari, Kentarou

    2015-01-01

    Weakly interacting dark matter particles can be pair-produced at colliders and detected through signatures featuring missing energy in association with either QCD/EW radiation or heavy quarks. In order to constrain the mass and the couplings to standard model particles, accurate and precise predictions for production cross sections and distributions are of prime importance. In this work, we consider various simplified models with s-channel mediators. We implement such models in the FeynRules/MadGraph5 a MC rate at NLO framework, which allows to include higher-order QCD corrections in realistic simulations and to study their effect systematically. As a first phenomenological application, we present predictions for dark matter production in association with jets and with a top-quark pair at the LHC, at next-to-leading order accuracy in QCD, including matching/merging to parton showers. Our study shows that higher-order QCD corrections to dark matter production via s-channel mediators have a significant impact not only on total production rates, but also on shapes of distributions. We also show that the inclusion of next-to-leading order effects results in a sizeable reduction of the theoretical uncertainties. (orig.)

  9. Pricing and Timing Strategies for New Product Using Agent-Based Simulation of Behavioural Consumers

    OpenAIRE

    Keeheon Lee; Hoyeop Lee; Chang Ouk Kim

    2014-01-01

    In this study, we are interested in the problem of determining the pricing and timing strategies of a new product by developing an agent-based product diffusion simulation. In the proposed simulation model, agents imitate behavioural consumers, who are reference dependent and risk averse in the evaluation of new products and whose interactions create word-of-mouth regarding new products. Pricing and timing strategies involve the timing of a new product release, the timing of providing a disco...

  10. A High-Order, Linear Time-Invariant Model for Application to Higher Harmonic Control and Flight Control System Interaction

    Science.gov (United States)

    Cheng, Rendy P.; Tischler, Mark B.; Celi, Roberto

    2006-01-01

    This research describes a new methodology for the extraction of a high-order, linear time invariant model, which allows the periodicity of the helicopter response to be accurately captured. This model provides the needed level of dynamic fidelity to permit an analysis and optimization of the AFCS and HHC algorithms. The key results of this study indicate that the closed-loop HHC system has little influence on the AFCS or on the vehicle handling qualities, which indicates that the AFCS does not need modification to work with the HHC system. However, the results show that the vibration response to maneuvers must be considered during the HHC design process, and this leads to much higher required HHC loop crossover frequencies. This research also demonstrates that the transient vibration responses during maneuvers can be reduced by optimizing the closed-loop higher harmonic control algorithm using conventional control system analyses.

  11. Toward Higher QA: From Parametric Release of Sterile Parenteral Products to PAT for Other Pharmaceutical Dosage Forms.

    Science.gov (United States)

    Hock, Sia Chong; Constance, Neo Xue Rui; Wah, Chan Lai

    2012-01-01

    Pharmaceutical products are generally subjected to end-product batch testing as a means of quality control. Due to the inherent limitations of conventional batch testing, this is not the most ideal approach for determining the pharmaceutical quality of the finished dosage form. In the case of terminally sterilized parenteral products, the limitations of conventional batch testing have been successfully addressed with the application of parametric release (the release of a product based on control of process parameters instead of batch sterility testing at the end of the manufacturing process). Consequently, there has been an increasing interest in applying parametric release to other pharmaceutical dosage forms, beyond terminally sterilized parenteral products. For parametric release to be possible, manufacturers must be capable of designing quality into the product, monitoring the manufacturing processes, and controlling the quality of intermediates and finished products in real-time. Process analytical technology (PAT) has been thought to be capable of contributing to these prerequisites. It is believed that the appropriate use of PAT tools can eventually lead to the possibility of real-time release of other pharmaceutical dosage forms, by-passing the need for end-product batch testing. Hence, this literature review attempts to present the basic principles of PAT, introduce the various PAT tools that are currently available, present their recent applications to pharmaceutical processing, and explain the potential benefits that PAT can bring to conventional ways of processing and quality assurance of pharmaceutical products. Last but not least, current regulations governing the use of PAT and the manufacturing challenges associated with PAT implementation are also discussed. Pharmaceutical products are generally subjected to end-product batch testing as a means of quality control. Due to the inherent limitations of conventional batch testing, this is not the most

  12. Real Time Part Input Control of a Pull Production System by Finding IF-THEN Rules

    Science.gov (United States)

    Ramli, Rizauddin; Yamamoto, Hidehiko; Abu Qudeiri, Jaber

    This paper considers the part input problem of a production system where two Flexible Transfer Lines (FTLs) consisting of an up-stream production line and a down-stream production line while operating under Just In Time (JIT) production management. The up-stream production line processes the raw material after receiving them from suppliers, and after processing them, delivers the processed product to a down-stream production line via a conveyer. In this paper, we have proposed a novel idea for a part input real time control system, known as Algorithm for Real Time Control of Part Input Systems (ARTCOPS). The algorithm is useful when FTLs are in operation under a production order that is different from the pre-decided production schedule. Simulations of virtual production systems have been carried out to verify that ARTCOPS is useful in real time control, although the production orders are different from the pre-decided production scheduling.

  13. Productivity and time use during occupational therapy and nutrition/dietetics clinical education: a cohort study.

    Directory of Open Access Journals (Sweden)

    Sylvia Rodger

    Full Text Available BACKGROUND: Currently in the Australian higher education sector higher productivity from allied health clinical education placements is a contested issue. This paper will report results of a study that investigated output changes associated with occupational therapy and nutrition/dietetics clinical education placements in Queensland, Australia. Supervisors' and students' time use during placements and how this changes for supervisors compared to when students are not present in the workplace is also presented. METHODOLOGY/PRINCIPAL FINDINGS: A cohort design was used with students from four Queensland universities, and their supervisors employed by Queensland Health. There was an increasing trend in the number of occasions of service delivered when the students were present, and a statistically significant increase in the daily mean length of occasions of service delivered during the placement compared to pre-placement levels. CONCLUSIONS/SIGNIFICANCE: A novel method for estimating productivity and time use changes during clinical education programs for allied health disciplines has been applied. During clinical education placements there was a net increase in outputs, suggesting supervisors engage in longer consultations with patients for the purpose of training students, while maintaining patient numbers. Other activities were reduced. This paper is the first time these data have been shown in Australia and form a sound basis for future assessments of the economic impact of student placements for allied health disciplines.

  14. Time-resolved photoemission micro-spectrometer using higher-order harmonics of Ti:sapphire laser

    International Nuclear Information System (INIS)

    Azuma, J.; Kamada, M.; Kondo, Y.

    2004-01-01

    Full text: A new photoemission spectrometer is under construction for the photoemission microscopy and the time-resolved pump- probe experiment. The higher order harmonics of the Ti:sapphire laser is used as the light source of the VUV region in this system. Because the fundamental laser is focused tightly into the rare gas jet to generate the higher order harmonics, the spot size of the laser, in other words, the spot size of the VUV light source is smaller than a few tens of micrometer. This smallness of the spot size has advantage for the microscopy. In order to compensate the low flux of the laser harmonics, a multilayer-coated schwaltzshild optics was designed. The multilayers play also as the monochromatic filter. The spatial resolution of this schwaltzshild system is found to be less than 1 micrometer by the ray-tracing calculations. A main chamber of the system is equipped with a time-of-flight energy analyzer to improve the efficiency of the electron detection. The main chamber and the gas chamber are separated by a differential pumping chamber and a thin Al foil. The system is designed for the study of the clean surface. It will be capable to perform the sub-micron photoemission microscopy and the femto-second pump-probe photoemission study for the various photo-excited dynamics on clean surfaces

  15. Red mud a byproduct of aluminum production contains soluble vanadium that causes genotoxic and cytotoxic effects in higher plants

    Energy Technology Data Exchange (ETDEWEB)

    Mišík, Miroslav [Institute of Cancer Research, Department of Medicine I, Comprehensive Cancer Center, Medical University of Vienna, Vienna (Austria); Burke, Ian T. [Earth Surface Science Institute, School of Earth and Environment, University of Leeds, Leeds LS2 9JT (United Kingdom); Reismüller, Matthias; Pichler, Clemens; Rainer, Bernhard [Institute of Cancer Research, Department of Medicine I, Comprehensive Cancer Center, Medical University of Vienna, Vienna (Austria); Mišíková, Katarina [Department of Botany, Faculty of Natural Sciences, Comenius University, Bratislava (Slovakia); Mayes, William M. [Centre for Environmental and Marine Sciences, University of Hull, Scarborough YO11 3AZ (United Kingdom); Knasmueller, Siegfried, E-mail: siegfried.knasmueller@meduniwien.ac.at [Institute of Cancer Research, Department of Medicine I, Comprehensive Cancer Center, Medical University of Vienna, Vienna (Austria)

    2014-09-15

    Red mud (RM) is a byproduct of aluminum production; worldwide between 70 and 120 million tons is produced annually. We analyzed RM which was released in the course of the Kolontar disaster in Hungary into the environment in acute and genotoxicity experiments with plants which are widely used for environmental monitoring. We detected induction of micronuclei which reflect chromosomal damage in tetrads of Tradescantia and in root cells of Allium as well as retardation of root growth with contaminated soils and leachates. Chemical analyses showed that RM contains metals, in particular high concentrations of vanadium. Follow-up experiments indicated that vanadate causes the effects in the plants. This compound causes also in humans DNA damage and positive results were obtained in carcinogenicity studies. Since it was found also in RM from other production sites our findings indicate that its release in the environment is a global problem which should be studied in more detail. Capsule abstract: Our findings indicate that the red mud causes genotoxic effect in plants probably due to the presence of vanadate which is contained at high concentrations in the residue. - Highlights: • Red mud, a by-product of aluminum production, causes DNA-damage in higher plants. • We showed that this effect is caused by vanadate a known carcinogenic genotoxin. • Vanadate is contained in high concentrations in the residue. • Release of red mud may cause adverse effects in ecosystems and affect human health.

  16. Are part-time workers less productive and underpaid?

    OpenAIRE

    Garnero, Andrea

    2016-01-01

    About one in five workers across OECD countries is employed part-time, and the share has been steadily increasing since the beginning of the economic and financial crisis in 2007. Part-time options play an important economic role by providing more flexible working arrangements for both workers and firms. Part-time employment has also contributed substantially to increasing the employment rate, especially among women. However, part-time work comes at a cost of lower wages for workers, mainly b...

  17. The optimal production-run time for a stock-dependent imperfect production process

    Directory of Open Access Journals (Sweden)

    Jain Divya

    2013-01-01

    Full Text Available This paper develops an inventory model for a hypothesized volume flexible manufacturing system in which the production rate is stock-dependent and the system produces both perfect and imperfect quality items. The demand rate of perfect quality items is known and constant, whereas the demand rate of imperfect (non-conforming to specifications quality items is a function of discount offered in the selling price. In this paper, we determine an optimal production-run time and the optimal discount that should be offered in the selling price to influence the sale of imperfect quality items produced by the manufacturing system. The considered model aims to maximize the net profit obtained through the sales of both perfect and imperfect quality items subject to certain constraints of the system. The solution procedure suggests the use of ‘Interior Penalty Function Method’ to solve the associated constrained maximization problem. Finally, a numerical example demonstrating the applicability of proposed model has been included.

  18. Calibration of environmental monitors operating on time integrating principles for radon/thoron decay products

    International Nuclear Information System (INIS)

    Bigu, J.; Grenier, M.

    1982-03-01

    An environmental radiation monitor for radon decay products has been tested under laboratory controlled conditions. The instrument is of a quasi-time-integrating type and was tested in conjunction with a radon 'box' calibration facility. It has been found that the instrument appreciably underestimates the radon daughter Working Level (WL). This is attributed to plate-out of decay products in the monitor sampling head. The difference between monitor reading and the WL by grab-sampling was higher for low aerosol concentrations. Plate-out on the instrument detector and sampling head, and contamination effects have been observed for the thoron case. There is partial agreement between experimental results and theoretical expectation. The monitor is slow to react to sudden changes in radiation level. The instrument should prove quite useful in the routine monitoring of surface and underground environments provided some suggested changes in the instrument are introduced

  19. Introducing conjoint analysis method into delayed lotteries studies: its validity and time stability are higher than in adjusting.

    Science.gov (United States)

    Białek, Michał; Markiewicz, Łukasz; Sawicki, Przemysław

    2015-01-01

    The delayed lotteries are much more common in everyday life than are pure lotteries. Usually, we need to wait to find out the outcome of the risky decision (e.g., investing in a stock market, engaging in a relationship). However, most research has studied the time discounting and probability discounting in isolation using the methodologies designed specifically to track changes in one parameter. Most commonly used method is adjusting, but its reported validity and time stability in research on discounting are suboptimal. The goal of this study was to introduce the novel method for analyzing delayed lotteries-conjoint analysis-which hypothetically is more suitable for analyzing individual preferences in this area. A set of two studies compared the conjoint analysis with adjusting. The results suggest that individual parameters of discounting strength estimated with conjoint have higher predictive value (Study 1 and 2), and they are more stable over time (Study 2) compared to adjusting. We discuss these findings, despite the exploratory character of reported studies, by suggesting that future research on delayed lotteries should be cross-validated using both methods.

  20. Introducing conjoint analysis method into delayed lotteries studies: Its validity and time stability are higher than in adjusting

    Directory of Open Access Journals (Sweden)

    Michal eBialek

    2015-01-01

    Full Text Available The delayed lotteries are much more common in everyday life than are pure lotteries. Usually, we need to wait to find out the outcome of the risky decision (e.g., investing in a stock market, engaging in a relationship. However, most research has studied the time discounting and probability discounting in isolation using the methodologies designed specifically to track changes in one parameter. Most commonly used method is adjusting, but its reported validity and time stability in research on discounting are suboptimal.The goal of this study was to introduce the novel method for analyzing delayed lotteries - conjoint analysis - which hypothetically is more suitable for analyzing individual preferences in this area. A set of two studies compared the conjoint analysis with adjusting. The results suggest that individual parameters of discounting strength estimated with conjoint have higher predictive value (Study 1 & 2, and they are more stable over time (Study 2 compared to adjusting. We discuss these findings, despite the exploratory character of reported studies, by suggesting that future research on delayed lotteries should be cross-validated using both methods.

  1. Adrenocortical Production Is Associated with Higher Levels of Luteinizing Hormone in Nonobese Women with Polycystic Ovary Syndrome

    Directory of Open Access Journals (Sweden)

    Luciana Tock

    2014-01-01

    Full Text Available Objective. Insulin resistance (IR and ovarian and adrenal hyperandrogenism are a common finding in women with polycystic ovary syndrome (PCOS. The aim of the present study was to access possible differences in insulin resistance, gonadotropins, and androgens production in obese and nonobese PCOS women. Study Design. We studied 37 PCOS women (16 nonobese and 21 obese and 18 nonobese controls. Fasting glucose, insulin, androgens, and gonadotropins levels were determined. Salivary cortisol was measured basal and in the morning after dexamethasone (DEX 0.25 mg. Results. Nonobese PCOS women showed higher basal salivary cortisol and serum dehydroepiandrosterone sulfate and luteinizing hormone (LH levels than controls and obese PCOS. These hormones levels did not differ between the obese and control groups. After DEX administration no differences were found between the three groups. In PCOS women, salivary cortisol levels showed negative correlation with BMI (r=-0.52; P=0.001 and insulin (r=-0.47; P=0.003 and positive correlation with LH (r=0.40; P=0.016. Conclusion. Our results show an increased adrenocortical production in nonobese PCOS women, not related to IR and associated with a normal hypothalamic-pituitary-adrenal suppression. Higher LH levels might be involved in this event.

  2. Multivariate Time Series Analysis for Optimum Production Forecast ...

    African Journals Online (AJOL)

    FIRST LADY

    (Amstrong, 1994, Bates, 1969, Newbold and Granger, 1974 and Whinkler and Makridakis ... distinct, essential components of inventory management while the random production is first ... To achieve this goal, model parameters are estimated or ... important regression model in forecasting of that nature, hence this study.

  3. Singularity Structure Analysis of the Higher-Dimensional Time-Gated Manakov System: Periodic Excitations and Elastic Scattering

    International Nuclear Information System (INIS)

    Kuetche, Victor Kamgang; Bouetou, Thomas Bouetou; Kofane, Timoleon Crepin

    2010-12-01

    We investigate the singularity structure analysis of the higher-dimensional time-gated Manakov system referring to the (2+1)-dimensional coupled nonlinear Schroedinger (CNLS) equations, and we show that these equations are Painleve-integrable. By means of the Weiss et al.'s methodology, we show the arbitrariness of the expansion coefficients and the consistency of the truncation corresponding to a special Baecklund transformation (BT) of these CNLS equations. In the wake of such transformation, following the Hirota's formalism, we derive a one-soliton solution. Besides, by using the Zakharov-Shabat (ZS) scheme which provides a general Lax-representation of an evolution system, we show that the (2+1)-dimensional CNLS system under interests is completely integrable. Furthermore, using the arbitrariness of the above coefficients, we unearth and investigate a typical spectrum of periodic coherent structures while depicting elastic interactions amongst such patterns. (author)

  4. Computer-mediated communication and time pressure induce higher cardiovascular responses in the preparatory and execution phases of cooperative tasks.

    Science.gov (United States)

    Costa Ferrer, Raquel; Serrano Rosa, Miguel Ángel; Zornoza Abad, Ana; Salvador Fernández-Montejo, Alicia

    2010-11-01

    The cardiovascular (CV) response to social challenge and stress is associated with the etiology of cardiovascular diseases. New ways of communication, time pressure and different types of information are common in our society. In this study, the cardiovascular response to two different tasks (open vs. closed information) was examined employing different communication channels (computer-mediated vs. face-to-face) and with different pace control (self vs. external). Our results indicate that there was a higher CV response in the computer-mediated condition, on the closed information task and in the externally paced condition. These role of these factors should be considered when studying the consequences of social stress and their underlying mechanisms.

  5. Academic Work—Faster, Higher, Further? On the (Missing Proportion of Work to Spare Time in the (Cultural Sciences

    Directory of Open Access Journals (Sweden)

    Gert Dressel

    2008-01-01

    Full Text Available We make the practices of the academic production of knowledge a subject of critical discussion by focusing on the world of academic work and the academics themselves. Based on interviews with academics in the field of cultural sciences we conclude that with regard to their daily routines, their annual schedules, and their life-courses the so-called private life (family life, leisure time etc. becomes dominated by the social and cultural logics of the working sphere. Although it might appear exaggerated, we will refer to the humanities as a "total institution" which entails social, physical, and mental costs for its "inmates" as well as for those who never managed to become "inmates" (in spite of their efforts and those who don’t belong to the institution any more. URN: urn:nbn:de:0114-fqs0801385

  6. Regional 18F-Fluorodeoxyglucose Hypometabolism is Associated with Higher Apathy Scores Over Time in Early Alzheimer Disease.

    Science.gov (United States)

    Gatchel, Jennifer R; Donovan, Nancy J; Locascio, Joseph J; Becker, J Alex; Rentz, Dorene M; Sperling, Reisa A; Johnson, Keith A; Marshall, Gad A

    2017-07-01

    Apathy is among the earliest and most pervasive neuropsychiatric symptoms in prodromal and mild Alzheimer disease (AD) dementia that correlates with functional impairment and disease progression. We investigated the association of apathy with regional 18F-fluorodeoxyglucose (FDG) metabolism in cognitively normal, mild cognitive impairment, and AD dementia subjects from the Alzheimer's Disease Neuroimaging Initiative database. Cross-sectional and longitudinal studies. 57 North American research sites. 402 community dwelling elders. Apathy was assessed using the Neuropsychiatric Inventory Questionnaire. Baseline FDG metabolism in five regions implicated in the neurobiology of apathy and AD was investigated in relationship to apathy at baseline (cross-sectional general linear model) and longitudinally (mixed random/fixed effect model). Covariates included age, sex, diagnosis, apolipoprotein E genotype, premorbid intelligence, cognition, and antidepressant use. Cross-sectional analysis revealed that posterior cingulate hypometabolism, diagnosis, male sex, and antidepressant use were associated with higher apathy scores. Longitudinal analysis revealed that the interaction of supramarginal hypometabolism and time, posterior cingulate hypometabolism, and antidepressant use were associated with higher apathy scores across time; only supramarginal hypometabolism was positively related to rate of increase of apathy. Results support an association of apathy with hypometabolism in parietal regions commonly affected in early stages of AD, rather than medial frontal regions implicated in the neurobiology of apathy in later stages. Further work is needed to substantiate whether this localization is specific to apathy rather than to disease stage, and to investigate the potential role of AD proteinopathies in the pathogenesis of apathy. Copyright © 2017 American Association for Geriatric Psychiatry. Published by Elsevier Inc. All rights reserved.

  7. Decreased production of higher alcohols by Saccharomyces cerevisiae for Chinese rice wine fermentation by deletion of Bat aminotransferases.

    Science.gov (United States)

    Zhang, Cui-Ying; Qi, Ya-Nan; Ma, Hong-Xia; Li, Wei; Dai, Long-Hai; Xiao, Dong-Guang

    2015-04-01

    An appropriate level of higher alcohols produced by yeast during the fermentation is one of the most important factors influencing Chinese rice wine quality. In this study, BAT1 and BAT2 single- and double-gene-deletion mutant strains were constructed from an industrial yeast strain RY1 to decrease higher alcohols during Chinese rice wine fermentation. The results showed that the BAT2 single-gene-deletion mutant strain produced best improvement in the production of higher alcohols while remaining showed normal growth and fermentation characteristics. Furthermore, a BAT2 single-gene-deletion diploid engineered strain RY1-Δbat2 was constructed and produced low levels of isobutanol and isoamylol (isoamyl alcohol and active amyl alcohol) in simulated fermentation of Chinese rice wine, 92.40 and 303.31 mg/L, respectively, which were 33.00 and 14.20 % lower than those of the parental strain RY1. The differences in fermentation performance between RY1-Δbat2 and RY1 were minor. Therefore, construction of this yeast strain is important in future development in Chinese wine industry and provides insights on generating yeast strains for other fermented alcoholic beverages.

  8. The power of management in medical services. Can we manage better for higher quality and more productive medical services?

    Directory of Open Access Journals (Sweden)

    Magdalena BARBU

    2010-06-01

    Full Text Available Medical services are the most important services of all since we all depend on them. Their quality and productivity can assure a wealthy nation and therefore good economical results. The offer of medical services depends on medical personnel and more than this, on the management in the medical field since any resource not managed well or not managed at all is only a lost one, regardless its value. Management is therefore the key, the “how to” method of obtaining the desired result. The same approach can be applied into our study in order to reach more productive medical services which to prove high quality to all patients. We need to use and to squeeze the entire force of management tools in order to reach our goal: accessible medical services full of quality. The current worldwide crisis situation makes us think that after job and food, even medical services (also a basic thing after all can become a “luxury” although this should never happen. Therefore we must do whatever needed to improve the way medical organizations are driven so that the quality of their medical services will be better and better and the productivity will be at a higher level. Medical management should have as a goal making it possible for patients to be able to solve their health problems as soon as possible and as good as possible.

  9. Chemical stability of insulin. 2. Formation of higher molecular weight transformation products during storage of pharmaceutical preparations.

    Science.gov (United States)

    Brange, J; Havelund, S; Hougaard, P

    1992-06-01

    Formation of covalent, higher molecular weight transformation (HMWT) products during storage of insulin preparations at 4-45 degrees C was studied by size exclusion chromatography. The main products are covalent insulin dimers (CID), but in protamine-containing preparations the concurrent formation of covalent insulin-protamine (CIP) products takes place. At temperatures greater than or equal to 25 degrees C parallel or consecutive formation of covalent oligo- and polymers can also be observed. Rate of HMWT is only slightly influenced by species of insulin but varies with composition and formulation, and for isophane (NPH) preparations, also with the strength of preparation. Temperature has a pronounced effect on CID, CIP, and, especially, covalent oligo- and polymer formation. The CIDs are apparently formed between molecules within the hexameric unit common for all types of preparations and rate of formation is generally faster in glycerol-containing preparations. Compared with insulin hydrolysis reactions (see the preceding paper), HMWT is one order of magnitude slower, except for NPH preparations.

  10. Future enhancements to 3D printing and real time production

    Science.gov (United States)

    Landa, Joseph; Jenkins, Jeffery; Wu, Jerry; Szu, Harold

    2014-05-01

    The cost and scope of additive printing machines range from several hundred to hundreds of thousands of dollars. For the extra money, one can get improvements in build size, selection of material properties, resolution, and consistency. However, temperature control during build and fusing predicts outcome and protects the IP by large high cost machines. Support material options determine geometries that can be accomplished which drives cost and complexity of printing heads. Historically, 3D printers have been used for design and prototyping efforts. Recent advances and cost reduction sparked new interest in developing printed products and consumables such as NASA who is printing food, printing consumer parts (e.g. cell phone cases, novelty toys), making tools and fixtures in manufacturing, and recursively print a self-similar printer (c.f. makerbot). There is a near term promise of the capability to print on demand products at the home or office... directly from the printer to use.

  11. Choice of foods: Allocation of time and money, household production and market services ­ Part II

    DEFF Research Database (Denmark)

    Bonke, Jens

    1993-01-01

    Executive summary: 1. This is the second report on a study investigating how demand for food products with varying degrees of convenience depends on disposable income and disposable time. 2. Both absolute and relative expenditures on convenient food decrease with disposable time and increase...... in Denmark. This contrasts with Sweden, where higher education leads to more expenditure on fast food. This may indicate a slower pace of modernisation of eating habits in Denmark than in Sweden. 6. Ownership of microwave ovens and dishwashers means more expenditure on fast meals. Ownership of a freezer...... means reduced expenses on most kinds of foodstuffs, possibly due to obtaining quantity discounts. 7. Ownership of household appliances and hiring domestic help decreases the probability of eating out. 8. Singles spend money on meals away from home more frequently than couples, whereas the spending...

  12. Time-dependent histamine release from stored human blood products

    DEFF Research Database (Denmark)

    Nielsen, Hans Jørgen; Edvardsen, L; Vangsgaard, K

    1996-01-01

    .0 (range 176.0-910.0) nmol/l in whole blood and 475.0 (range 360.0-1560.0) nmol/l in plasma-reduced whole blood, while it was undetectable in SAGM blood. Spontaneous histamine release increased in a time-dependent manner from a median of 6.7 (range 2.2-17.4) nmol/l at the time of storage to 175.0 (range 33...

  13. Quantum Statistical Entropy of Non-extreme and Nearly Extreme Black Holes in Higher-Dimensional Space-Time

    Institute of Scientific and Technical Information of China (English)

    XU Dian-Yan

    2003-01-01

    The free energy and entropy of Reissner-Nordstrom black holes in higher-dimensional space-time are calculated by the quantum statistic method with a brick wall model. The space-time of the black holes is divided into three regions: region 1, (r > r0); region 2, (r0 > r > n); and region 3, (T-J > r > 0), where r0 is the radius of the outer event horizon, and r, is the radius of the inner event horizon. Detailed calculation shows that the entropy contributed by region 2 is zero, the entropy contributed by region 1 is positive and proportional to the outer event horizon area, the entropy contributed by region 3 is negative and proportional to the inner event horizon area. The total entropy contributed by all the three regions is positive and proportional to the area difference between the outer and inner event horizons. As rt approaches r0 in the nearly extreme case, the total quantum statistical entropy approaches zero.

  14. Energy-momentum conserving higher-order time integration of nonlinear dynamics of finite elastic fiber-reinforced continua

    Science.gov (United States)

    Erler, Norbert; Groß, Michael

    2015-05-01

    Since many years the relevance of fibre-reinforced polymers is steadily increasing in fields of engineering, especially in aircraft and automotive industry. Due to the high strength in fibre direction, but the possibility of lightweight construction, these composites replace more and more traditional materials as metals. Fibre-reinforced polymers are often manufactured from glass or carbon fibres as attachment parts or from steel or nylon cord as force transmission parts. Attachment parts are mostly subjected to small strains, but force transmission parts usually suffer large deformations in at least one direction. Here, a geometrically nonlinear formulation is necessary. Typical examples are helicopter rotor blades, where the fibres have the function to stabilize the structure in order to counteract large centrifugal forces. For long-run analyses of rotor blade deformations, we have to apply numerically stable time integrators for anisotropic materials. This paper presents higher-order accurate and numerically stable time stepping schemes for nonlinear elastic fibre-reinforced continua with anisotropic stress behaviour.

  15. Self-reported sitting time and physical activity: interactive associations with mental well-being and productivity in office employees.

    Science.gov (United States)

    Puig-Ribera, Anna; Martínez-Lemos, Iván; Giné-Garriga, Maria; González-Suárez, Ángel Manuel; Bort-Roig, Judit; Fortuño, Jesús; Muñoz-Ortiz, Laura; McKenna, Jim; Gilson, Nicholas D

    2015-01-31

    Little is known about how sitting time, alone or in combination with markers of physical activity (PA), influences mental well-being and work productivity. Given the need to develop workplace PA interventions that target employees' health related efficiency outcomes; this study examined the associations between self-reported sitting time, PA, mental well-being and work productivity in office employees. Descriptive cross-sectional study. Spanish university office employees (n = 557) completed a survey measuring socio-demographics, total and domain specific (work and travel) self-reported sitting time, PA (International Physical Activity Questionnaire short version), mental well-being (Warwick-Edinburg Mental Well-Being Scale) and work productivity (Work Limitations Questionnaire). Multivariate linear regression analyses determined associations between the main variables adjusted for gender, age, body mass index and occupation. PA levels (low, moderate and high) were introduced into the model to examine interactive associations. Higher volumes of PA were related to higher mental well-being, work productivity and spending less time sitting at work, throughout the working day and travelling during the week, including the weekends (p employees, higher sitting times on work days and occupational sitting were associated with decreased mental well-being (p employees. Employees' PA levels exerts different influences on the associations between sitting time, mental well-being and work productivity. The specific associations and the broad sweep of evidence in the current study suggest that workplace PA strategies to improve the mental well-being and productivity of all employees should focus on reducing sitting time alongside efforts to increase PA.

  16. A novel Fast Gas Chromatography based technique for higher time resolution measurements of speciated monoterpenes in air

    Science.gov (United States)

    Jones, C. E.; Kato, S.; Nakashima, Y.; Kajii, Y.

    2013-12-01

    Biogenic emissions supply the largest fraction of non-methane volatile organic compounds (VOC) from the biosphere to the atmospheric boundary layer, and typically comprise a complex mixture of reactive terpenes. Due to this chemical complexity, achieving comprehensive measurements of biogenic VOC (BVOC) in air within a satisfactory time resolution is analytically challenging. To address this, we have developed a novel, fully automated Fast Gas Chromatography (Fast-GC) based technique to provide higher time resolution monitoring of monoterpenes (and selected other C9-C15 terpenes) during plant emission studies and in ambient air. To our knowledge, this is the first study to apply a Fast-GC based separation technique to achieve quantification of terpenes in air. Three chromatography methods have been developed for atmospheric terpene analysis under different sampling scenarios. Each method facilitates chromatographic separation of selected BVOC within a significantly reduced analysis time compared to conventional GC methods, whilst maintaining the ability to quantify individual monoterpene structural isomers. Using this approach, the C10-C15 BVOC composition of single plant emissions may be characterised within a ~ 14 min analysis time. Moreover, in situ quantification of 12 monoterpenes in unpolluted ambient air may be achieved within an ~ 11 min chromatographic separation time (increasing to ~ 19 min when simultaneous quantification of multiple oxygenated C9-C10 terpenoids is required, and/or when concentrations of anthropogenic VOC are significant). This corresponds to a two- to fivefold increase in measurement frequency compared to conventional GC methods. Here we outline the technical details and analytical capability of this chromatographic approach, and present the first in situ Fast-GC observations of 6 monoterpenes and the oxygenated BVOC linalool in ambient air. During this field deployment within a suburban forest ~ 30 km west of central Tokyo, Japan, the

  17. Productions of invisible: considerations about time and training of teachers

    Directory of Open Access Journals (Sweden)

    Alice Dalmaso

    2013-01-01

    Full Text Available This paper aims to approach, even though in a briefly way, the subject of invention in the training of teachers. In order to do this, we will make a brief overview on Virgínia Kastrup contributions about this issue. One of the questions is the time - through Henri Bergson’s duration concept and its using in training theme. From this point, we will try to deconstruct a view about the identity reference in contemporaneity toward to multiple and open ways of existence. In the inventive movements of the processuality, the time is considered as an expression of human being individuation. It means to last refer to an immediacy of being, of being time, which are modulable and mutant, always in a creation process. In a movement of building a body which leaves an identity reference – that is opposite of self-transformation – necessarily we report us to the relation between the idea of time as duration and the individuation principle by Gilberto Simondon. With these concepts and their possible resonance in the discussion about formative politics, we can develop a view over the invisible to training of teachers and over the learners and another ways of operating in the world. The invention as a lever direct us to a field of possibilities to conceive and experience another time (and space which is producer of subjectivity, singularities and differences.

  18. Managing product complexity: It`s just a matter of time

    Energy Technology Data Exchange (ETDEWEB)

    Hinckley, C.M.

    1998-06-01

    It has long been the goal of designers to identify a robust measure of product complexity to guide product decisions. Using Design for Assembly evaluations from over 225 assemblies and subassemblies, alternative measures of product complexity are identified and compared. Time is shown to be the most consistently predicted, useful, and fungible measure. The distribution of assembly times for a product can be modeled by Pareto`s law. This leads to a new, more effective product design guideline and a predictive tool that enables rapid and accurate prediction of assembly times for redesigned products without having to repeat DFMA analysis.

  19. Joint optimization of economic production quantity and preventive maintenance with considering multi-products and reserve time

    International Nuclear Information System (INIS)

    Liu, Xuejuan; Wang, Binrong

    2017-01-01

    Purpose: We deal with the problem of the joint determination of optimal economic production quantity (EPQ) and optimal preventive maintenance (PM) for a system that can produce multiple products alternately. The objective is to find the optimal number of production cycles and the PM policy simultaneously by minimizing the cost model. Design/methodology/approach: Considering the products go through the system in a sequence and a complete run of all products forms a production cycle. In each cycle, beyond production time we also consider some reserve time for maintenance and setup, shortage and overproduction may occur. We study the integrated problem based on two PM policies, and explain the situation with the other PM policies. The delay – time concept is used to model PM decisions. Findings: Using the integrated EPQ and PM model, we can calculate the optimal production planning and PM schedule simultaneously, especially we consider multiple products in each production cycle, which is more practical and economic than previous works. Originality/value: In modern companies, the production planning and maintenance schedule share the same system, and traditional research about two activities is separated, that always generate conflicts, such as inadequate or excessive maintenance, and shortages, etc., so we develop the integrated EPQ and PM model to avoid these undesirable effects.

  20. Joint optimization of economic production quantity and preventive maintenance with considering multi-products and reserve time

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Xuejuan; Wang, Binrong

    2017-07-01

    Purpose: We deal with the problem of the joint determination of optimal economic production quantity (EPQ) and optimal preventive maintenance (PM) for a system that can produce multiple products alternately. The objective is to find the optimal number of production cycles and the PM policy simultaneously by minimizing the cost model. Design/methodology/approach: Considering the products go through the system in a sequence and a complete run of all products forms a production cycle. In each cycle, beyond production time we also consider some reserve time for maintenance and setup, shortage and overproduction may occur. We study the integrated problem based on two PM policies, and explain the situation with the other PM policies. The delay – time concept is used to model PM decisions. Findings: Using the integrated EPQ and PM model, we can calculate the optimal production planning and PM schedule simultaneously, especially we consider multiple products in each production cycle, which is more practical and economic than previous works. Originality/value: In modern companies, the production planning and maintenance schedule share the same system, and traditional research about two activities is separated, that always generate conflicts, such as inadequate or excessive maintenance, and shortages, etc., so we develop the integrated EPQ and PM model to avoid these undesirable effects.

  1. Used frying oils and fats and their utilization in the production of methyl esters of higher fatty acids

    Energy Technology Data Exchange (ETDEWEB)

    Cvengros, J. Jan; Cvengrosova, Zuzana [Slovak Univ. of Technology, Faculty of Chemical and Food Technology, Bratislava (Slovakia)

    2004-08-01

    From the point of view price and available capacity used frying oils or fats (UFO) represent an attractive raw material for the production of methyl esters (ME) of higher fatty acids as alternative fuels for diesel engines. If they are treated such that the required quality, with an acidity number up to 3.0 mg KOH/g and a water content up to 0.1 wt%, is achieved they can be processed to ME using standard techniques of alkali-catalysed transesterification with methanol which are utilized for production of the ME from new oils/fats. The problematic waste can thus be converted to an ecologically friendly fuel. Vacuum distillation of free fatty acids in a film evaporator is an effective method for simultaneously decreasing the content of FFA and water in UFO. Final distillation of raw ME in a film vacuum evaporator results in practically all parameters required by the standard, in the final ME being achieved. Undesirable low-temperature properties of ME derived from UFO, due to higher fraction of saturated acyls, can be adjusted by the addition of depressants-flow improvers for winterization. Some simplified methods for the quality control of UFO and ME are discussed. The conversion of acylglycerols to ME is monitored by GLC with a packed column, where the peak areas of ME in the sample before and after the reaction with an effective methylation agent are compared. The method for the determination of the water content in esters utilizes the reaction of calcium carbide with water, the volume of acetylene being measured. (Author)

  2. Wireless Time Tracking Improves Productivity at CSU Long Beach.

    Science.gov (United States)

    Charmack, Scott; Walsh, Randy

    2002-01-01

    Describes California State University Long Beach's implementation of new maintenance management software, which integrated maintenance, inventory control, and key control and allows technicians to enter and receive information through handheld wireless devices for more accurate time accounting. The school estimates a 10 percent increase in…

  3. Study of higher hydrocarbon production during ethylacetylene pyrolysis using laser-generated vacuum-ultraviolet photoionization detection

    Energy Technology Data Exchange (ETDEWEB)

    Boyle, J.; Pfefferle, L. (Yale Univ., New Haven, CT (USA))

    1990-04-19

    Higher hydrocarbon formation during the pyrolysis of ethylacetylene in a microjet reactor was studied by vacuum-ultraviolet photoionization time-of-flight mass spectrometry. At the wavelength employed, this ionization technique allows for the simultaneous detection of both stable and intermediate polyatomic species with ionization potentials below 10.49 eV, including most hydrocarbons with two or more carbon atoms. Minimal fragmentation simplifies the determination of parent species and allows identification of probable reaction pathways involving hydrocarbon radicals as well as stable species. The pyrolysis of ethylacetylene was carried out in the fast-flow microjet reactor (residence times 1-2 ms) at temperatures from 300 to 1,600 K.

  4. Bovine serum albumin-GABA-His-Pro-NH2: an immunogen for production of higher affinity antisera for TRH

    International Nuclear Information System (INIS)

    Youngblood, W.W.; Moray, L.J.; Busby, W.H.; Kizer, J.S.

    1983-01-01

    Coupling the synthesize hapten, GABA-His-Pro-NH 2 to bovine serum albumin at a molar ratio of 18 : 1 by means of water-soluble carbodiimide produced an immunogen which stimulated the rapid production in New Zealand white rabbits of antisera with an affinity (2.42+-0.3x10 9 l/mol) for TRH, some 8-fold higher than that of antisera (0.33+-0.03x10 9 l/mol) raised by immunization with a conjugate produced by the currently accepted bis-diazotized-benzidine bridging technique. These higher affinity antibodies when used in a standard TRH radioimmunoassay permitted the detection of less than 1/pg of TRH per assay tube and showed an extremely low affinity for the two major metabolites of TRH, p-Glu-His-Pro-COOH and His-Pro diketopiperazine (4.84x10 4 and 4.0x10 4 l/mol, respectively). Application of this newer radioimmunoassay to the measurement of TRH in brain tissue yielded measurements of TRH content similar to those determined by current RIA methods. Chromatography of whole crude brain extracts revealed one major immunoreactive peak corresponding to authentic TRH. It is concluded that immunization of rabbits with this hapten rapidly produces antisera with a high affinity for TRH suitable for the development of a very sensitive TRH radioimmunoassay. (Auth.)

  5. Assessments of higher-order ionospheric effects on GPS coordinate time series: A case study of CMONOC with longer time series

    Science.gov (United States)

    Jiang, Weiping; Deng, Liansheng; Zhou, Xiaohui; Ma, Yifang

    2014-05-01

    Higher-order ionospheric (HIO) corrections are proposed to become a standard part for precise GPS data analysis. For this study, we deeply investigate the impacts of the HIO corrections on the coordinate time series by implementing re-processing of the GPS data from Crustal Movement Observation Network of China (CMONOC). Nearly 13 year data are used in our three processing runs: (a) run NO, without HOI corrections, (b) run IG, both second- and third-order corrections are modeled using the International Geomagnetic Reference Field 11 (IGRF11) to model the magnetic field, (c) run ID, the same with IG but dipole magnetic model are applied. Both spectral analysis and noise analysis are adopted to investigate these effects. Results show that for CMONOC stations, HIO corrections are found to have brought an overall improvement. After the corrections are applied, the noise amplitudes decrease, with the white noise amplitudes showing a more remarkable variation. Low-latitude sites are more affected. For different coordinate components, the impacts vary. The results of an analysis of stacked periodograms show that there is a good match between the seasonal amplitudes and the HOI corrections, and the observed variations in the coordinate time series are related to HOI effects. HOI delays partially explain the seasonal amplitudes in the coordinate time series, especially for the U component. The annual amplitudes for all components are decreased for over one-half of the selected CMONOC sites. Additionally, the semi-annual amplitudes for the sites are much more strongly affected by the corrections. However, when diplole model is used, the results are not as optimistic as IGRF model. Analysis of dipole model indicate that HIO delay lead to the increase of noise amplitudes, and that HIO delays with dipole model can generate false periodic signals. When dipole model are used in modeling HIO terms, larger residual and noise are brought in rather than the effective improvements.

  6. Detecting Chaos from Agricultural Product Price Time Series

    Directory of Open Access Journals (Sweden)

    Xin Su

    2014-12-01

    Full Text Available Analysis of the characteristics of agricultural product price volatility and trend forecasting are necessary to formulate and implement agricultural price control policies. Taking wholesale cabbage prices as an example, a multiple test methodology has been adopted to identify the nonlinearity, fractality, and chaos of the data. The approaches used include the R/S analysis, the BDS test, the power spectra, the recurrence plot, the largest Lyapunov exponent, the Kolmogorov entropy, and the correlation dimension. The results show that there is chaos in agricultural wholesale price data, which provides a good theoretical basis for selecting reasonable forecasting models as prediction techniques based on chaos theory can be applied to forecasting agricultural prices.

  7. Time-resolved production and detection of reactive atoms

    International Nuclear Information System (INIS)

    Grossman, L.W.; Hurst, G.S.

    1977-09-01

    Cesium iodide in the presence of a buffer gas was dissociated with a pulsed ultraviolet laser, which will be referred to as the source laser. This created a population of atoms at a well defined time and in a compact, well defined volume. A second pulsed laser, with a beam that completely surrounded that of the first, photoionized the cesium after a known time delay. This laser will be referred to as the detector laser. It was determined that for short time delays, all of the cesium atoms were easily ionized. When focused, the source laser generated an extremely intense fluence. By accounting for the beam intensity profile it was shown that all of the molecules in the central portion of the beam can be dissociated and detected. Besides proving the feasibility of single-molecule detection, this enabled a determination of the absolute photodissociation cross section as a function of wavelength. Initial studies of the time decay of the cesium signal at low argon pressures indicated a non-exponential decay. This was consistent with a diffusion mechanism transporting cesium atoms out of the laser beam. Therefore, it was desired to conduct further experiments using a tightly focused source beam, passing along the axis of the detector beam. The theoretical behavior of this simple geometry accounting for diffusion and reaction is easily calculated. A diffusion coefficient can then be extracted by data fitting. If reactive decay is due to impurities constituting a fixed percentage of the buffer gas, then two-body reaction rates will scale linearly with pressure and three-body reaction rates will scale quadratically. Also, the diffusion coefficient will scale inversely with pressure. At low pressures it is conceivable that decay due to diffusion would be sufficiently rapid that all other processes can be neglected. Extraction of a diffusion coefficient would then be quite direct. Finally, study of the reaction of cesium and oxygen was undertaken

  8. Seven novel probe systems for real-time PCR provide absolute single-base discrimination, higher signaling, and generic components.

    Science.gov (United States)

    Murray, James L; Hu, Peixu; Shafer, David A

    2014-11-01

    We have developed novel probe systems for real-time PCR that provide higher specificity, greater sensitivity, and lower cost relative to dual-labeled probes. The seven DNA Detection Switch (DDS)-probe systems reported here employ two interacting polynucleotide components: a fluorescently labeled probe and a quencher antiprobe. High-fidelity detection is achieved with three DDS designs: two internal probes (internal DDS and Flip probes) and a primer probe (ZIPR probe), wherein each probe is combined with a carefully engineered, slightly mismatched, error-checking antiprobe. The antiprobe blocks off-target detection over a wide range of temperatures and facilitates multiplexing. Other designs (Universal probe, Half-Universal probe, and MacMan probe) use generic components that enable low-cost detection. Finally, single-molecule G-Force probes employ guanine-mediated fluorescent quenching by forming a hairpin between adjacent C-rich and G-rich sequences. Examples provided show how these probe technologies discriminate drug-resistant Mycobacterium tuberculosis mutants, Escherichia coli O157:H7, oncogenic EGFR deletion mutations, hepatitis B virus, influenza A/B strains, and single-nucleotide polymorphisms in the human VKORC1 gene. Copyright © 2014 American Society for Investigative Pathology and the Association for Molecular Pathology. Published by Elsevier Inc. All rights reserved.

  9. System-theoretic analysis of due-time performance in production systems

    Directory of Open Access Journals (Sweden)

    David Jacobs

    1995-01-01

    Full Text Available Along with the average production rate, the due-time performance is an important characteristic of manufacturing systems. Unlike the production rate, the due-time performance has received relatively little attention in the literature, especially in the context of large volume production. This paper is devoted to this topic. Specifically, the notion of due-time performance is formalized as the probability that the number of parts produced during the shipping period reaches the required shipment size. This performance index is analyzed for both lean and mass manufacturing environments. In particular, it is shown that, to achieve a high due-time performance in a lean environment, the production system should be scheduled for a sufficiently small fraction of its average production rate. In mass production, due-time performance arbitrarily close to one can be achieved for any scheduling practice, up to the average production rate.

  10. Shift level analysis of cable yarder availability, utilization, and productive time

    Science.gov (United States)

    James R. Sherar; Chris B. LeDoux

    1989-01-01

    Decision makers, loggers, managers, and planners need to understand and have methods for estimating utilization and productive time of cable logging systems. In making an accurate prediction of how much area and volume a machine will log per unit time and the associated cable yarding costs, a reliable estimate of the availability, utilization, and productive time of...

  11. Global Near Real-Time Satellite-based Flood Monitoring and Product Dissemination

    Science.gov (United States)

    Smith, M.; Slayback, D. A.; Policelli, F.; Brakenridge, G. R.; Tokay, M.

    2012-12-01

    , and are working to develop higher resolution flood detection using alternate sensors, including Landsat and various radar sensors. Although these provide better spatial resolution, this comes at the cost of being less timely. As of late 2011, the system expanded to fully global daily flood monitoring, with free public access to the generated products. These include GIS-ready files of flood and normal water extent (KML, shapefile, raster), and small scale graphic maps (10 degrees square) showing regional flood extent. We are now expanding product distribution channels to include live web services (WMS, etc), allowing easier access via standalone apps. We are also working to bring our product into the Pacific Disaster Center's Disaster Alert system and mobile app for wider accessibility.

  12. Credentialism, Adults, and Part-Time Higher Education in the United Kingdom: An Account of Rising Take Up and Some Implications for Policy.

    Science.gov (United States)

    Fuller, Alison

    2001-01-01

    Explains the growing importance of higher-level qualifications for adults in the UK, highlighting statistical trends in commitment to learning and qualifying-the result of taking part-time courses in higher education. Most part-time undergraduates fund their own tuition. Mature students' backgrounds and perspectives partly account for their rising…

  13. Holdup time measurement by radioactive tracers in pulp production

    International Nuclear Information System (INIS)

    Roetzer, H.; Donhoffer, D.

    1988-12-01

    A batch of pulp was to be labelled before passing two bleaching towers of a pulp plant. Activated glass fibres were used as a tracer, which contained 24-Na with a half-life of 15 hours. It was shown in laboratory tests, that the glass fibres were suitable for transport studies of wood pulp. For use in the tests the fibres were activated and suspended in water. Due to the small diameter of the fibres (2-5 micrometers) this suspension shows physical properties very similar to the pulp. For detection six scintillation probes were mounted at different positions outside the bleaching tower. Radiation protection during the test was very easy due to the low total activity of the tracer material. Residence time distributions for both towers were measured. The successful tracer experiments show, that the method of labelling is suited for investigations of material transport in the pulp and paper industry. 3 figs., 11 refs., 2 tabs. (Author)

  14. A Review of Just-In-Time Scheduling for Production and Logistics

    OpenAIRE

    田村, 隆善

    1999-01-01

    The Just-In-Time (JIT) production has been developed as a subsystem of the "whole" Toyota production system (TPS). Currently JIT or JIT production means the TPS especially in foreign countries. It is recognized that JIT is a key concept for enterprises competing in the diversified-products market. The technologies used in JIT are comprehensive and include technologies to design, install and control a production system, which are classified into three categories : hardware, information and sof...

  15. System-theoretic analysis of due-time performance in production systems

    OpenAIRE

    Jacobs David; Meerkov Semyon M.

    1995-01-01

    Along with the average production rate, the due-time performance is an important characteristic of manufacturing systems. Unlike the production rate, the due-time performance has received relatively little attention in the literature, especially in the context of large volume production. This paper is devoted to this topic. Specifically, the notion of due-time performance is formalized as the probability that the number of parts produced during the shipping period reaches the required shipme...

  16. Effects of Variable Production Rate and Time-Dependent Holding Cost for Complementary Products in Supply Chain Model

    Directory of Open Access Journals (Sweden)

    Mitali Sarkar

    2017-01-01

    Full Text Available Recently, a major trend is going to redesign a production system by controlling or making variable the production rate within some fixed interval to maintain the optimal level. This strategy is more effective when the holding cost is time-dependent as it is interrelated with holding duration of products and rate of production. An effort is made to make a supply chain model (SCM to show the joint effect of variable production rate and time-varying holding cost for specific type of complementary products, where those products are made by two different manufacturers and a common retailer makes them bundle and sells bundles to end customers. Demand of each product is specified by stochastic reservation prices with a known potential market size. Those players of the SCM are considered with unequal power. Stackelberg game approach is employed to obtain global optimum solution of the model. An illustrative numerical example, graphical representation, and managerial insights are given to illustrate the model. Results prove that variable production rate and time-dependent holding cost save more than existing literature.

  17. Effect of sowing time on productivity of fenugreek varieties (Trigonella foenum-graecum L., Trigonella coerulea (Desr. Ser.

    Directory of Open Access Journals (Sweden)

    І. М. Бобось

    2016-07-01

    Full Text Available Purpose. Determination of sowing time effect on productivity of various fenugreek species in the Forest-Steppe zone of Ukraine. Methods. Field study, laboratory test, analytical approach and statistical evaluation. Results. Effect of sowing time on economic characters of common fenugreek (Trigonella foenum graecum L. and blue fenugreek (Trigonella coerulea (Desr. Ser. was investigated. It was found that sowing time significantly influenced the individual productivity of plants and average yield of their fresh and dry matter. In particular, common and blue fenugreek plants formed not only the most developed vegetation but also higher productivity and fresh and dry matter yield, respectively, due to early-spring sowing. In case of summer sowing, the poorest yield of dry matter per unit was obtained for these species caused by a low fresh yield, though the moisture loss index was lower. Conclusions. Common fenugreek is promising for producing “mushroom grass” spices, and the conveyor supply of production in the Forest-Steep zone of Ukraine can be ensured by the first sowing time (the first or the second decades of April and the se­cond sowing time (the third decade of April as during this period more developed vegetation is formed that favored the higher yield of dry matter (1,3–1,5 t/ha.

  18. Shiitake Medicinal Mushroom, Lentinus edodes (Higher Basidiomycetes) Productivity and Lignocellulolytic Enzyme Profiles during Wheat Straw and Tree Leaf Bioconversion.

    Science.gov (United States)

    Elisashvili, Vladimir; Kachlishvili, Eva; Asatiani, Mikheil D

    2015-01-01

    Two commercial strains of Lentinus edodes have been comparatively evaluated for their productivity and lignocellulolytic enzyme profiles in mushroom cultivation using wheat straw or tree leaves as the growth substrates. Both substrates are profitable for recycling into shiitake fruit bodies. L. edodes 3715 gave the lowest yield of mushroom during tree leaves bioconversion with the biological efficiency (BE) 74.8% while the L. edodes 3721 BE achieved 83.4%. Cultivation of shiitake on wheat straw, especially in the presence of additional nitrogen source, increased the L. edodes 3721 BE to 92-95.3% owing to the high hydrolases activity and favorable conditions. Despite the quantitative variations, each strain of L. edodes had a similar pattern for secreting enzymes into the wheat straw and tree leaves. The mushrooms laccase and MnP activities were high during substrate colonization and declined rapidly during primordia appearance and fruit body development. While oxidase activity decreased, during the same period cellulases and xylanase activity raised sharply. Both cellulase and xylanase activity peaked at the mature fruit body stage. When mushrooms again shifted to the vegetative growth, oxidase activity gradually increased, whereas the hydrolases activity dropped rapidly. The MnP, CMCase, and FP activities of L. edodes 3721 during cultivation on wheat straw were higher than those during mushroom growth on tree leaves whereas the laccase activity was rather higher in fermentation of tree leaves. Enrichment of wheat straw with an additional nitrogen source rather favored to laccase, MnP, and FPA secretion during the vegetative stage of the L. edodes 3721 growth.

  19. Global, Daily, Near Real-Time Satellite-based Flood Monitoring and Product Dissemination

    Science.gov (United States)

    Slayback, D. A.; Policelli, F. S.; Brakenridge, G. R.; Tokay, M. M.; Smith, M. M.; Kettner, A. J.

    2013-12-01

    Flooding is the most destructive, frequent, and costly natural disaster faced by modern society, and is expected to increase in frequency and damage with climate change and population growth. Some of 2013's major floods have impacted the New York City region, the Midwest, Alberta, Australia, various parts of China, Thailand, Pakistan, and central Europe. The toll of these events, in financial costs, displacement of individuals, and deaths, is substantial and continues to rise as climate change generates more extreme weather events. When these events do occur, the disaster management community requires frequently updated and easily accessible information to better understand the extent of flooding and better coordinate response efforts. With funding from NASA's Applied Sciences program, we developed and are now operating a near real-time global flood mapping system to help provide critical flood extent information within 24-48 hours of events. The system applies a water detection algorithm to MODIS imagery received from the LANCE (Land Atmosphere Near real-time Capability for EOS) system at NASA Goddard within a few hours of satellite overpass. Using imagery from both the Terra (10:30 AM local time overpass) and Aqua (1:30 PM) platforms allows an initial daily assessment of flooding extent by late afternoon, and more robust assessments after accumulating cloud-free imagery over several days. Cloud cover is the primary limitation in detecting surface water from MODIS imagery. Other issues include the relatively coarse scale of the MODIS imagery (250 meters), the difficulty of detecting flood waters in areas with continuous canopy cover, confusion of shadow (cloud or terrain) with water, and accurately identifying detected water as flood as opposed to normal water extents. We have made progress on many of these issues, and are working to develop higher resolution flood detection using alternate sensors, including Landsat and various radar sensors. Although these

  20. ASPECTS REGARDING THE SETTING OF TIME STANDARDS FOR THE PRODUCTION AND SEWING OPERATIONS

    Directory of Open Access Journals (Sweden)

    SECAN Cristina

    2014-05-01

    Full Text Available This paper presents the technological process of manufacture of a shoe for women in IL system in order to establish the time and the production norm in the processing-sewing procedure. The sequence of operations is presented in a case study that analyzed how can be obtained the upper assembly of a footwear product that later becomes integral part into the finished product. Drawing up the technological process is done considering both the manual operations and the manual-mechanical operations for processing and assembling the parts that make the whole upper assembly by gluing the parts, by seaming and securing the joints. The type of equipment chosen to carry out operations is influencing through its productivity the necessary material calculated and hence the labour force required. The amount of time consists of time needed for preparation-finishing time, operative time, time of working place service and time of regulated interruptions. These periods of times were determined basically by timing assistance of the manufacturing process throughout its development. Production norm is calculated on the basis of the standard time, taking into account that it represents the amount of products manufactured in a work shift In order to improve the process by reducing the time of production and the number of workers engaged we are considering the automation of the manufacturing process by using modern methods using laser cutting or cutting under running water, automatic sewing machines, strip conveyor belts with pace imposed etc.

  1. Marine mammal distribution in the open ocean: a comparison of ocean color data products and levant time scales

    Science.gov (United States)

    Ohern, J.

    2016-02-01

    Marine mammals are generally located in areas of enhanced surface primary productivity, though they may forage much deeper within the water column and higher on the food chain. Numerous studies over the past several decades have utilized ocean color data from remote sensing instruments (CZCS, MODIS, and others) to asses both the quantity and time scales over which surface primary productivity relates to marine mammal distribution. In areas of sustained upwelling, primary productivity may essentially grow in the secondary levels of productivity (the zooplankton and nektonic species on which marine mammals forage). However, in many open ocean habitats a simple trophic cascade does not explain relatively short time lags between enhanced surface productivity and marine mammal presence. Other dynamic features that entrain prey or attract marine mammals may be responsible for the correlations between marine mammals and ocean color. In order to investigate these features, two MODIS (moderate imaging spectroradiometer) data products, the concentration as well as the standard deviation of surface chlorophyll were used in conjunction with marine mammal sightings collected within Ecuadorian waters. Time lags between enhanced surface chlorophyll and marine mammal presence were on the order of 2-4 weeks, however correlations were much stronger when the standard deviation of spatially binned images was used, rather than the chlorophyll concentrations. Time lags also varied between Balaenopterid and Odontocete cetaceans. Overall, the standard deviation of surface chlorophyll proved a useful tool for assessing potential relationships between marine mammal sightings and surface chlorophyll.

  2. Higher-order Brain Areas Associated with Real-time Functional MRI Neurofeedback Training of the Somato-motor Cortex.

    Science.gov (United States)

    Auer, Tibor; Dewiputri, Wan Ilma; Frahm, Jens; Schweizer, Renate

    2018-05-15

    Neurofeedback (NFB) allows subjects to learn self-regulation of neuronal brain activation based on information about the ongoing activation. The implementation of real-time functional magnetic resonance imaging (rt-fMRI) for NFB training now facilitates the investigation into underlying processes. Our study involved 16 control and 16 training right-handed subjects, the latter performing an extensive rt-fMRI NFB training using motor imagery. A previous analysis focused on the targeted primary somato-motor cortex (SMC). The present study extends the analysis to the supplementary motor area (SMA), the next higher brain area within the hierarchy of the motor system. We also examined transfer-related functional connectivity using a whole-volume psycho-physiological interaction (PPI) analysis to reveal brain areas associated with learning. The ROI analysis of the pre- and post-training fMRI data for motor imagery without NFB (transfer) resulted in a significant training-specific increase in the SMA. It could also be shown that the contralateral SMA exhibited a larger increase than the ipsilateral SMA in the training and the transfer runs, and that the right-hand training elicited a larger increase in the transfer runs than the left-hand training. The PPI analysis revealed a training-specific increase in transfer-related functional connectivity between the left SMA and frontal areas as well as the anterior midcingulate cortex (aMCC) for right- and left-hand trainings. Moreover, the transfer success was related with training-specific increase in functional connectivity between the left SMA and the target area SMC. Our study demonstrates that NFB training increases functional connectivity with non-targeted brain areas. These are associated with the training strategy (i.e., SMA) as well as with learning the NFB skill (i.e., aMCC and frontal areas). This detailed description of both the system to be trained and the areas involved in learning can provide valuable information

  3. The changing nicotine products landscape: time to outlaw sales of combustible tobacco products?

    Science.gov (United States)

    Hefler, Marita

    2018-01-01

    Combustible tobacco products are unique both for the extraordinary harm they cause, and the fact that more than 50 years after these harms became known, they continue to be widely and legally available globally. However, the rapid evolution of the nicotine product marketplace in recent years warrants a re-assessment of the viability of phasing out commercial sales of combustible tobacco, and presents an opportunity to end the exceptionalism of combustible tobacco being permitted for sale. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  4. OMPS Near Real-time Products Available Through NASA LANCE (Land Atmosphere Near Real-time Capability for EOS)

    Science.gov (United States)

    Warnock, A.; Durbin, P. B.; Cechini, M. F.; Masuoka, E.

    2017-12-01

    Near real-time (NRT) images from the NASA Ozone Mapping and Profiler Suite (OMPS) for sulfur dioxide, total column ozone and aerosol index products are now available through NASA's online Land Atmosphere Near real-time Capability for EOS (LANCE) system. Color palettes, image dimensions and data ranges have been aligned with the corresponding OMI products, allowing for direct comparison of OMPS NRT images with OMI NRT images already available in NASA Worldview. The images are delivered to LANCE within hours of satellite observation. LANCE NRT imagery can be interactively viewed through Worldview and the Global Imagery Browse Services (GIBS).

  5. Influence of production time on quality and height of yield of crisp lettuce

    International Nuclear Information System (INIS)

    Odziemkowski, S.; Gajc-Wolska, J.; Skapski, H.

    1998-01-01

    The cultivar of crisp lettuce Saladin, was grown in the field in 10 production terms starting from spring to autumn in 1993-95. The highest average weight of head of crisp lettuce was obtained in earlier terms of production. The head weight at the time of harvest depended on the amount of solar radiation during the time of lettuce head formation

  6. Accelerated stress testing in a time-driven product development process

    NARCIS (Netherlands)

    Lu, Y.; Loh, H.T.; Brombacher, A.C.; Ouden, den P.H.

    2000-01-01

    In order to compete in the market, companies have to produce the right products with a shorter time to market and at lower costs than before. Shorter time to market requires the product development process (PDP) to change the way of working from the classical ‘wait and react’ to anticipating and

  7. Quality Improvement, Inventory Management, Lead Time Reduction and Production Scheduling in High-Mix Manufacturing Environments

    Science.gov (United States)

    2017-01-13

    Quality Improvement , Inventory Management, Lead Time Reduction and Production Scheduling in High-mix Manufacturing Environments by Sean Daigle B.S...Mechanical Engineering Chairman, Department Committee on Graduate Theses 2 Quality Improvement , Inventory Management, Lead Time Reduction and... Production Scheduling in High-mix Manufacturing Environments by Sean Daigle Submitted to the Department of Mechanical Engineering on January 13, 2017, in

  8. If All You Have Is a Hammer, Everything Begins to Look Like a Nail--How Wicked Is the Problem of Measuring Productivity in Higher Education?

    Science.gov (United States)

    Drengenberg, Nicholas; Bain, Alan

    2017-01-01

    This paper addresses the wicked problem of measuring the productivity of learning and teaching in higher education. We show how fundamental validity issues and difficulties identified in educational productivity research point to the need for a qualitatively different framework when considering the entire question. We describe the work that needs…

  9. Products cooked in preheated versus non-preheated ovens. Baking times, calculated energy consumption, and product quality compared.

    Science.gov (United States)

    Odland, D; Davis, C

    1982-08-01

    Plain muffins, yellow cake, baked custard, apple pie, tuna casserole, frozen tuna casserole, cheese soufflé, and meat loaf were baked in preheated and non-preheated standard gas, continuous-clean gas, standard electric, and self-cleaning electric ovens. Products generally required 5 min. or less extra baking time when cooked in non-preheated rather than in preheated ovens. The variability in baking times often was less between preheated and non-preheated ovens than among oven types. Calculated energy consumption values showed that usually less energy was required to bake products in non-preheated than in preheated ovens; savings averaged about 10 percent. Few significant differences were found in physical measurements or eating quality either between preheated and non-preheated ovens or among oven types. Overall, for the products tested, findings confirmed that preheating the oven is not essential for good product quality and, therefore, is an unnecessary use of energy.

  10. Increasing the productivity of glycopeptides analysis by using higher-energy collision dissociation-accurate mass-product-dependent electron transfer dissociation.

    Science.gov (United States)

    Saba, Julian; Dutta, Sucharita; Hemenway, Eric; Viner, Rosa

    2012-01-01

    Currently, glycans are attracting attention from the scientific community as potential biomarkers or as posttranslational modifications (PTMs) of therapeutic proteins. However, structural characterization of glycoproteins and glycopeptides remains analytically challenging. Here, we report on the implementation of a novel acquisition strategy termed higher-energy collision dissociation-accurate mass-product-dependent electron transfer dissociation (HCD-PD-ETD) on a hybrid linear ion trap-orbitrap mass spectrometer. This acquisition strategy uses the complementary fragmentations of ETD and HCD for glycopeptides analysis in an intelligent fashion. Furthermore, the approach minimizes user input for optimizing instrumental parameters and enables straightforward detection of glycopeptides. ETD spectra are only acquired when glycan oxonium ions from MS/MS HCD are detected. The advantage of this approach is that it streamlines data analysis and improves dynamic range and duty cycle. Here, we present the benefits of HCD-PD-ETD relative to the traditional alternating HCD/ETD for a trainer set containing twelve-protein mixture with two glycoproteins: human serotransferrin, ovalbumin and contaminations of two other: bovine alpha 1 acid glycoprotein (bAGP) and bovine fetuin.

  11. Real-time product attribute control to manufacture antibodies with defined N-linked glycan levels.

    Science.gov (United States)

    Zupke, Craig; Brady, Lowell J; Slade, Peter G; Clark, Philip; Caspary, R Guy; Livingston, Brittney; Taylor, Lisa; Bigham, Kyle; Morris, Arvia E; Bailey, Robert W

    2015-01-01

    Pressures for cost-effective new therapies and an increased emphasis on emerging markets require technological advancements and a flexible future manufacturing network for the production of biologic medicines. The safety and efficacy of a product is crucial, and consistent product quality is an essential feature of any therapeutic manufacturing process. The active control of product quality in a typical biologic process is challenging because of measurement lags and nonlinearities present in the system. The current study uses nonlinear model predictive control to maintain a critical product quality attribute at a predetermined value during pilot scale manufacturing operations. This approach to product quality control ensures a more consistent product for patients, enables greater manufacturing efficiency, and eliminates the need for extensive process characterization by providing direct measures of critical product quality attributes for real time release of drug product. © 2015 American Institute of Chemical Engineers.

  12. Synthetic addiction extends the productive life time of engineered Escherichia coli populations

    DEFF Research Database (Denmark)

    Rugbjerg, Peter; Sarup-Lytzen, Kira; Nagy, Mariann

    2018-01-01

    range of genetic variants that disrupt the biosynthetic capacity of the engineered organism. Synthetic product addiction that couples high-yield production of a desired metabolite to expression of nonconditionally essential genes could offer a solution to this problem by selectively favoring cells...... with biosynthetic capacity in the population without constraining the medium. We constructed such synthetic product addiction by controlling the expression of two nonconditionally essential genes with a mevalonic acid biosensor. The product-addicted production organism retained high-yield mevalonic acid production...... through 95 generations of cultivation, corresponding to the number of cell generations required for >200-m3 industrial-scale production, at which time the nonaddicted strain completely abolished production. Using deep DNA sequencing, we find that the product-addicted populations do not accumulate genetic...

  13. Improving the mixing performances of rice straw anaerobic digestion for higher biogas production by computational fluid dynamics (CFD) simulation.

    Science.gov (United States)

    Shen, Fei; Tian, Libin; Yuan, Hairong; Pang, Yunzhi; Chen, Shulin; Zou, Dexun; Zhu, Baoning; Liu, Yanping; Li, Xiujin

    2013-10-01

    As a lignocellulose-based substrate for anaerobic digestion, rice straw is characterized by low density, high water absorbability, and poor fluidity. Its mixing performances in digestion are completely different from traditional substrates such as animal manures. Computational fluid dynamics (CFD) simulation was employed to investigate mixing performances and determine suitable stirring parameters for efficient biogas production from rice straw. The results from CFD simulation were applied in the anaerobic digestion tests to further investigate their reliability. The results indicated that the mixing performances could be improved by triple impellers with pitched blade, and complete mixing was easily achieved at the stirring rate of 80 rpm, as compared to 20-60 rpm. However, mixing could not be significantly improved when the stirring rate was further increased from 80 to 160 rpm. The simulation results agreed well with the experimental results. The determined mixing parameters could achieve the highest biogas yield of 370 mL (g TS)(-1) (729 mL (g TS(digested))(-1)) and 431 mL (g TS)(-1) (632 mL (g TS(digested))(-1)) with the shortest technical digestion time (T 80) of 46 days. The results obtained in this work could provide useful guides for the design and operation of biogas plants using rice straw as substrates.

  14. Buyer-Supplier Collaboration in New Product Development - Reduction of Ramp-up time for high-tech products

    OpenAIRE

    Nielsen, Halvor Eid

    2015-01-01

    Product development has always been a key activity to gain competitive advantage. Especially in technology based industry, such as the maritime subsea industry. Due to increasing globalization and high competition from low cost countries, companies need to streamline the supply chain and development in order to get new product out on the market fast and efficient. Involving suppliers in the development have shown great effect on reduced development time and cost while increasing quality of...

  15. Dynamic extrafloral nectar production: the timing of leaf damage affects the defensive response in Senna mexicana var. chapmanii (Fabaceae).

    Science.gov (United States)

    Jones, Ian M; Koptur, Suzanne

    2015-01-01

    • Extrafloral nectar (EFN) mediates food for protection mutualisms between plants and defensive insects. Understanding sources of variation in EFN production is important because such variations may affect the number and identity of visitors and the effectiveness of plant defense. We investigated the influence of plant developmental stage, time of day, leaf age, and leaf damage on EFN production in Senna mexicana var. chapmanii. The observed patterns of variation in EFN production were compared with those predicted by optimal defense theory.• Greenhouse experiments with potted plants were conducted to determine how plant age, time of day, and leaf damage affected EFN production. A subsequent field study was conducted to determine how leaf damage, and the resulting increase in EFN production, affected ant visitation in S. chapmanii.• More nectar was produced at night and by older plants. Leaf damage resulted in increased EFN production, and the magnitude of the response was greater in plants damaged in the morning than those damaged at night. Damage to young leaves elicited a stronger defensive response than damage to older leaves, in line with optimal defense theory. Damage to the leaves of S. chapmanii also resulted in significantly higher ant visitation in the field.• Extrafloral nectar is an inducible defense in S. chapmanii. Developmental variations in its production support the growth differentiation balance hypothesis, while within-plant variations and damage responses support optimal defense theory. © 2015 Botanical Society of America, Inc.

  16. A Time of Quiet Activism: Research, Practice, and Policy in American Women's Higher Education, 1945-1965

    Science.gov (United States)

    Eisenmann, Linda

    2005-01-01

    This article reflects on three narratives that affected American women's participation in higher education during the first twenty years after World War II. In hindsight, the educators of the 1950s and early 1960s may seem gratuitously meek and self-effacing. In comparison to later efforts, their activism can appear unnecessarily limited and too…

  17. Just-in-Time Research: A Call to Arms for Research into Mobile Technologies in Higher Education

    Science.gov (United States)

    Byrne-Davis, Lucie; Dexter, Hilary; Hart, Jo; Cappelli, Tim; Byrne, Ged; Sampson, Ian; Mooney, Jane; Lumsden, Colin

    2015-01-01

    Mobile technologies are becoming commonplace in society and in education. In higher education, it is crucial to understand the impact of constant access to information on the development of the knowledge and competence of the learner. This study reports on a series of four surveys completed by UK-based medical students (n = 443) who received…

  18. Funding System of Full-Time Higher Education and Technical Efficiency: Case of the University of Ljubljana

    Science.gov (United States)

    Tajnikar, Maks; Debevec, Jasmina

    2008-01-01

    The present paper tackles the issue of the higher education funding system in Slovenia. Its main attribute is that institutions are classified into study groups according to their fields of education, and funds granted by the state are based on their weights or study group factors (SGF). Analysis conducted using data envelopment analysis tested…

  19. A Lesson of Lost Political Capital in Public Higher Education: Leadership Challenges in a Time of Needed Organizational Change

    Science.gov (United States)

    Hilton, Mark; Jacobson, Rod

    2012-01-01

    All higher education institutions are struggling with a rapidly changing market and financial landscape. Here is a management-centered analysis of what happened when a college president, recognizing the need to make a radical adaptation to those changes, tried moving a campus community to a new organizational model, without collegial consensus,…

  20. Hard Times in Higher Education: The Closure of Subject Centres and the Implications for Education for Sustainable Development (ESD

    Directory of Open Access Journals (Sweden)

    Brian Chalkley

    2011-04-01

    Full Text Available Within many British Universities and, indeed, across higher education internationally, how best to provide education for sustainable development (ESD has become an increasingly important issue. There is now a widespread view that higher education sectors have a key part to play in preparing societies for the transition to a low carbon economy and the shift towards more sustainable ways of living and working. In the UK, a leading role in this field has been played by the Higher Education Academy and especially its network of 24 Subject Centres, each of which promotes curriculum enhancement in a particular discipline area. The mission of the Higher Education Academy has been to help raise the overall quality of the student learning experience across all disciplines and all Higher Education institutions (HEIs. As part of promoting and supporting many kinds of curriculum innovation and staff development, the HE Academy has championed the cause of ESD. Now, however, as a result of government spending cuts, the Academy is facing severe budget reductions and all its Subject Centres are soon to close. At this pivotal moment, the purpose of this paper is, therefore, to review the HE Academy’s past contribution to ESD and to explore the likely future implications of the demise of its Subject Centres. The paper ends by outlining some ideas as to how the ESD agenda might be advanced in the post-Subject Centre era, in the light of the Academy’s intention to support subject communities under its new structure. The paper has been developed through participation in key committees, engagement with Academy and Subject Centre staff, as well as through a literature review.

  1. Examining the Potential Impact of Full Tuition Fees on Mature Part-Time Students in English Higher Education

    Science.gov (United States)

    Shaw, Angela

    2014-01-01

    This paper examines current part-time mature learners' views on the potential impact upon future students as full fees are introduced from 2012. It investigates the problems which part-time mature learners may face with the advent of student loans and subsequent debt, given that they are usually combining complex lives with their studies, with…

  2. Snow driven Radiative Forcing in High Latitude Areas of Disturbance Using Higher Resolution Albedo Products from Landsat and Sentinel-2

    Science.gov (United States)

    Erb, A.; Li, Z.; Schaaf, C.; Wang, Z.; Rogers, B. M.

    2017-12-01

    Land surface albedo plays an important role in the surface energy budget and radiative forcing by determining the proportion of absorbed incoming solar radiation available to drive photosynthesis and surface heating. In Arctic regions, albedo is particularly sensitive to land cover and land use change (LCLUC) and modeling efforts have shown it to be the primary driver of effective radiative forcing from the biogeophysical effects of LCLUC. In boreal forests, the effects of these changes are complicated during snow covered periods when newly exposed, highly reflective snow can serve as the primary driver of radiative forcing. In Arctic biomes disturbance scars from fire, pest and harvest can remain in the landscape for long periods of time. As such, understanding the magnitude and persistence of these disturbances, especially in the shoulder seasons, is critical. The Landsat and Sentinel-2 Albedo Products couple 30m and 20m surface reflectances with concurrent 500m BRDF Products from the MODerate resolution Imaging Spectroradiometer (MODIS). The 12 bit radiometric fidelity of Sentinel-2 and Landsat-8 allow for the inclusion of high-quality, unsaturated albedo calculations over snow covered surfaces at scales more compatible with fragmented landscapes. Recent work on the early spring albedo of fire scars has illustrated significant post-fire spatial heterogeneity of burn severity at the landscape scale and highlights the need for a finer spatial resolution albedo record. The increased temporal resolution provided by multiple satellite instruments also allows for a better understanding of albedo dynamics during the dynamic shoulder seasons and in historically difficult high latitude locations where persistent cloud cover limits high quality retrievals. Here we present how changes in the early spring albedo of recent boreal forest disturbance in Alaska and central Canada affects landscape-scale radiative forcing. We take advantage of the long historical Landsat record

  3. Choice of foods: Allocation of time and money, household production and market services

    DEFF Research Database (Denmark)

    Bonke, Jens

    1992-01-01

    of meals as a case of household production with four kinds of input: the food products bought, the time used for shopping, cooking, and washing up, ho capital like kitchen appliances, and human capital like cooking skills. Maximum welfare will result when these inputs are optimised given the household...... somewhat in the same period, the overall disposable time for households has been going down. At the same time, incomes have been rising. Rational economic behaviour would imply that households react to these changed constraints by employing time-saving and time-buying strategies in meal preparation. 4......'s constraints of disposable income and disposable time. 3. In recent decades, women's participation in the labour market has increased significantly, with non-employed women becoming employed part-time, and part-time employed women becoming employed full-time. Even though men's working time has decreased...

  4. Post-Traumatic Hypoxia Is Associated with Prolonged Cerebral Cytokine Production, Higher Serum Biomarker Levels, and Poor Outcome in Patients with Severe Traumatic Brain Injury

    Science.gov (United States)

    Yan, Edwin B.; Satgunaseelan, Laveniya; Paul, Eldho; Bye, Nicole; Nguyen, Phuong; Agyapomaa, Doreen; Kossmann, Thomas; Rosenfeld, Jeffrey V.

    2014-01-01

    Abstract Secondary hypoxia is a known contributor to adverse outcomes in patients with traumatic brain injury (TBI). Based on the evidence that hypoxia and TBI in isolation induce neuroinflammation, we investigated whether TBI combined with hypoxia enhances cerebral cytokine production. We also explored whether increased concentrations of injury biomarkers discriminate between hypoxic (Hx) and normoxic (Nx) patients, correlate to worse outcome, and depend on blood–brain barrier (BBB) dysfunction. Forty-two TBI patients with Glasgow Coma Scale ≤8 were recruited. Cerebrospinal fluid (CSF) and serum were collected over 6 days. Patients were divided into Hx (n=22) and Nx (n=20) groups. Eight cytokines were measured in the CSF; albumin, S100, myelin basic protein (MBP) and neuronal specific enolase (NSE) were quantified in serum. CSF/serum albumin quotient was calculated for BBB function. Glasgow Outcome Scale Extended (GOSE) was assessed at 6 months post-TBI. Production of granulocye macrophage-colony stimulating factor (GM-CSF) was higher, and profiles of GM-CSF, interferon (IFN)-γ and, to a lesser extent, tumor necrosis factor (TNF), were prolonged in the CSF of Hx but not Nx patients at 4–5 days post-TBI. Interleukin (IL)-2, IL-4, IL-6, and IL-10 increased similarly in both Hx and Nx groups. S100, MBP, and NSE were significantly higher in Hx patients with unfavorable outcome. Among these three biomarkers, S100 showed the strongest correlations to GOSE after TBI-Hx. Elevated CSF/serum albumin quotients lasted for 5 days post-TBI and displayed similar profiles in Hx and Nx patients. We demonstrate for the first time that post-TBI hypoxia is associated with prolonged neuroinflammation, amplified extravasation of biomarkers, and poor outcome. S100 and MBP could be implemented to track the occurrence of post-TBI hypoxia, and prompt adequate treatment. PMID:24279428

  5. Time delays between core power production and external detector response from Monte Carlo calculations

    International Nuclear Information System (INIS)

    Valentine, T.E.; Mihalczo, J.T.

    1996-01-01

    One primary concern for design of safety systems for reactors is the time response of external detectors to changes in the core. This paper describes a way to estimate the time delay between the core power production and the external detector response using Monte Carlo calculations and suggests a technique to measure the time delay. The Monte Carlo code KENO-NR was used to determine the time delay between the core power production and the external detector response for a conceptual design of the Advanced Neutron Source (ANS) reactor. The Monte Carlo estimated time delay was determined to be about 10 ms for this conceptual design of the ANS reactor

  6. Design of Real Time Data Acquisition System Framework for Production Workshop Based on OPC Technology

    Directory of Open Access Journals (Sweden)

    Yue-xin Yang

    2017-01-01

    Full Text Available In this paper, the low level of production management information in a hydraulic torque converter enterprise is presented. It is needed to develop a digital assembly shop MES to solve this problem. There is a high demand for the real-time data acquisition of the production line in the digital assembly shop MES. According to the actual needs of MES in digital assembly workshop, a real time data acquisition system framework based on OPC technology and database technology is proposed. The framework can be used to meet the actual needs of the real time monitoring system and production business information processing in MES.

  7. Balancing development costs and sales to optimize the development time of product line additions

    NARCIS (Netherlands)

    Langerak, F.; Griffin, A.; Hultink, E.J.

    2010-01-01

    Development teams often use mental models to simplify development time decision making because a comprehensive empirical assessment of the trade-offs across the metrics of development time, development costs, proficiency in market-entry timing, and new product sales is simply not feasible.

  8. Faculty Time Allocations and Research Productivity: Gender, Race, and Family Effects.

    Science.gov (United States)

    Bellas, Marcia L.; Toutkoushian, Robert K.

    1999-01-01

    A study using data from 14,614 full-time faculty examined total work hours, research productivity, and allocation of work time among teaching, research, and service. The study found variation in time expenditures and research output influenced by gender, race/ethnicity, and marital/parental status, but findings were also sensitive to definitions…

  9. Soft Power, University Rankings and Knowledge Production: Distinctions between Hegemony and Self-Determination in Higher Education

    Science.gov (United States)

    Lo, William Yat Wai

    2011-01-01

    The purpose of this article is to analyse the nature of the global hegemonies in higher education. While anti-colonial thinkers describe the dominance of the Western paradigm as an oppression of indigenous culture and knowledge and as neo-colonialism in higher education, their arguments lead to such questions as how much self-determination do…

  10. SMOS near-real-time soil moisture product: processor overview and first validation results

    Directory of Open Access Journals (Sweden)

    N. J. Rodríguez-Fernández

    2017-10-01

    Full Text Available Measurements of the surface soil moisture (SM content are important for a wide range of applications. Among them, operational hydrology and numerical weather prediction, for instance, need SM information in near-real-time (NRT, typically not later than 3 h after sensing. The European Space Agency (ESA Soil Moisture and Ocean Salinity (SMOS satellite is the first mission specifically designed to measure SM from space. The ESA Level 2 SM retrieval algorithm is based on a detailed geophysical modelling and cannot provide SM in NRT. This paper presents the new ESA SMOS NRT SM product. It uses a neural network (NN to provide SM in NRT. The NN inputs are SMOS brightness temperatures for horizontal and vertical polarizations and incidence angles from 30 to 45°. In addition, the NN uses surface soil temperature from the European Centre for Medium-Range Weather Forecasts (ECMWF Integrated Forecast System (IFS. The NN was trained on SMOS Level 2 (L2 SM. The swath of the NRT SM retrieval is somewhat narrower (∼ 915 km than that of the L2 SM dataset (∼ 1150 km, which implies a slightly lower revisit time. The new SMOS NRT SM product was compared to the SMOS Level 2 SM product. The NRT SM data show a standard deviation of the difference with respect to the L2 data of < 0.05 m3 m−3 in most of the Earth and a Pearson correlation coefficient higher than 0.7 in large regions of the globe. The NRT SM dataset does not show a global bias with respect to the L2 dataset but can show local biases of up to 0.05 m3 m−3 in absolute value. The two SMOS SM products were evaluated against in situ measurements of SM from more than 120 sites of the SCAN (Soil Climate Analysis Network and the USCRN (US Climate Reference Network networks in North America. The NRT dataset obtains similar but slightly better results than the L2 data. In summary, the NN SMOS NRT SM product exhibits performances similar to those of the Level 2 SM product

  11. Do fragmented landholdings have higher production costs? Evidence from rice farmers in Northeastern Jiangxi province, P.R. China

    NARCIS (Netherlands)

    Tan, S.; Heerink, N.; Kruseman, G.; Qu, F.

    2008-01-01

    Land fragmentation is generally seen as an obstacle to agricultural productivity improvements, but it can also facilitate labor smoothing and risk diversification. In this paper we examine the impact of land fragmentation on the variable production costs of rice farmers in three villages in Jiangxi

  12. The Hidden Benefits of Part-Time Higher Education Study to Working Practices: Is There a Case for Making Them More Visible?

    Science.gov (United States)

    Callender, Claire; Little, Brenda

    2015-01-01

    Within the UK, part-time study is now seen as important in meeting wider government objectives for higher education (HE) and for sustainable economic growth through skills development. Yet, measures to capture the impact of HE may not be wholly appropriate to part-time study. In particular, the continuing focus on tangible, economic measures may…

  13. Study of relationship between time overrun and productivity on construction sites

    Directory of Open Access Journals (Sweden)

    Ameh, Oko John

    2011-12-01

    Full Text Available The history of the construction industry worldwide is full of projects that were completed with significant time and cost overruns. In an attempt to reverse this trend, this study aims at establishing the relationship between time overrun and labour productivity on construction sites in Lagos, Nigeria. 43 technical and management staff of some medium and large construction firms based in Lagos, Nigeria were sampled and administered a questionnaire survey. The questionnaire contained 18 causes of project time overrun and 14 causes of low labour productivity which had been identified from the literature reviewed. With these a relationship between project time overrun and low labour productivity was established. Both descriptive and inferential statistics were used in analyzing the data. Results indicate that inadequate funds for the project, inadequate planning before project takeoff, inadequate tools and equipment and delay in delivery of material top the list of major causes of time overrun while the use of wrong construction methods, inadequate construction materials and inaccurate drawing/specification are the key factors causing low labour productivity on construction sites. Significant negative relationship was found between time overrun and labour productivity in construction sites in Nigeria. The study concludes by recommending that early appointment of project managers could ensure proper management of both the human and material resources that could guarantee improved productivity and ultimately save projects from time overrun.

  14. Flexible Pedagogies: Part-Time Learners and Learning in Higher Education. Flexible Pedagogies: Preparing for the Future Series

    Science.gov (United States)

    McLinden, Michael

    2013-01-01

    This publication focuses on national and international policy initiatives to develop a better understanding of part-time learners and the types of flexibility that may enhance their study especially pedagogically. As part of our five-strand research project "Flexible Pedagogies: preparing for the future" it: (1) highlights the challenges…

  15. Recruitment and Retention of Full-Time Engineering Faculty, Fall 1980. Higher Education Panel Report Number 52.

    Science.gov (United States)

    Atelsek, Frank J.; Gomberg, Irene L.

    The extent of faculty vacancies in colleges of engineering, the effects of such vacancies upon research and instructional programs, and the nature of the competition between academia and industry in hiring engineering faculty were surveyed. The focus is on permanent full-time faculty positions in the following major engineering fields:…

  16. The Economic Domino Effect: A Phenomenological Study Exploring Community College Faculty's Lived Experiences during Financial Hard Times in Higher Education

    Science.gov (United States)

    Taylor, Tridai A.

    2014-01-01

    This qualitative study explored the lived experiences of eight full-time community college faculty members who taught during the economic crisis of 2008. The study was guided by the central research question, "How do community college faculty members describe their lived experiences regarding the recent economic crisis of 2008 and its impact…

  17. Do New Production Concepts and a new Management of Employment Relations, yield higher Employee Performance and lower Job Strain?

    Directory of Open Access Journals (Sweden)

    Karolus Kraan

    2007-05-01

    Full Text Available In this article old versus new production concepts (NPCs and employment relation instruments, are studied, separately and in combination, to find out which yield high employee performance and low job strain. Therefore, in 2005, TNO conducted coupled surveys among 149 supervisors and employees. In the past decades, in reaction to dysfunctions of Tayloristic and professional bureaucratic production concepts and employment relations, several new forms of employment relations and NPCs, appeared. Examples are the Socio-technical NPC and customized employment relations. In this study both this NPC and customized employment relations - i.c. customized performance targets - demonstrate positive associations with employee performance. According to Socio-technical theory the design of employment relations is relatively unimportant, as human resources are mobilised primarily by the production concept. Our results for this NPC show the legitimacy of this assumption, because its high employee performance is irrespective of the employment relation instruments. On the contrary, in the other NPCs and in professional bureaucracies, the (employment relation instruments of respectively an increased period needed for learning the job, and customized performance targets can compensate for the lower employee performance in these production concepts. The results do not show increased job strain, due to new production concepts, or new employment relations. production concepts, employment relations, labour productivity, socio-technical theory

  18. Animal DNA identification in food products and animal feed by real time polymerase chain reaction method

    Directory of Open Access Journals (Sweden)

    Людмила Мар’янівна Іщенко

    2016-11-01

    Full Text Available Approbation of diagnostic tests for species identification of beef, pork and chicken by real time polymerase chain reaction method was done. Meat food, including heat treated and animal feed, was used for research. The fact of inconsistencies was revealed for product composition of some meat products that is marked by manufacturer 

  19. Space-time structure of particle production in high-energy heavy-ion collisions

    Energy Technology Data Exchange (ETDEWEB)

    Ohtsuka, Naohiko; Ohnishi, Akira [Hokkaido Univ., Sapporo (Japan); Nara, Yasushi; Maruyama, Tomoyuki

    1998-07-01

    Space-Time structure of freeze-out of produced particles in relativistic nucleus-nucleus collisions are studied in the framework of two different cascade models, either with or without higher baryonic resonances. While higher excited baryonic resonances do not influence the spatial source size of freeze-out point, the freeze-out time distribution is shifted to be later by these resonances. (author)

  20. Order Level Inventory Models for Deteriorating Seasonable/Fashionable Products with Time Dependent Demand and Shortages

    OpenAIRE

    Skouri, K.; Konstantaras, I.

    2009-01-01

    An order level inventory model for seasonable/fashionable products subject to a period of increasing demand followed by a period of level demand and then by a period of decreasing demand rate (three branches ramp type demand rate) is considered. The unsatisfied demand is partially backlogged with a time dependent backlogging rate. In addition, the product deteriorates with a time dependent, namely, Weibull, deterioration rate. The model is studied under the following different replenishment p...

  1. Design of Real Time Data Acquisition System Framework for Production Workshop Based on OPC Technology

    OpenAIRE

    Yue-xin Yang; Gong-chang Ren

    2017-01-01

    In this paper, the low level of production management information in a hydraulic torque converter enterprise is presented. It is needed to develop a digital assembly shop MES to solve this problem. There is a high demand for the real-time data acquisition of the production line in the digital assembly shop MES. According to the actual needs of MES in digital assembly workshop, a real time data acquisition system framework based on OPC technology and database technology is proposed. The framew...

  2. Influence of the Time Perspective on New Product Development Success Indicators

    DEFF Research Database (Denmark)

    Kazerouni, Afrooz M.; Achiche, Sofiane; Hisarciklilar, Onur

    2011-01-01

    Understanding the underlying reasons for new product development success is central to effective new product management. However, difficulties related to estimating to what extent the objectives are being fulfilled and assessing the trade-offs between different project goals makes the new product...... of this research is to determine the appropriate sets of metrics to be used for assessing success during each phase of a product lifecycle. A practical case study was carried out by investigating 28 companies from Canadian and Danish industries. The companies are various industrial sectors. The data collection...... as they change depending on where a product is in its lifecycle. The influence of this time perspective on success indicators of new product developments has not been explored very extensively. In this paper, we investigate the success criteria during different phases of the product lifecycle. The goal...

  3. Precipitation Analysis at Fine Time Scales Using Multiple Satellites: Real-time and Research Products and Applications

    Science.gov (United States)

    Adler, Robert; Huffman, George; Bolvin, David; Nelkin, Eric; Curtis, Scott; Pierce, Harold

    2004-01-01

    Quasi-global precipitation analyses at fine time scales (3-hr) are described. TRMM observations (radar and passive microwave) are used to calibrate polar-orbit microwave observations from SSM/I (and other satellites instruments, including AMSR and AMSU) and geosynchronous IR observations. The individual data sets are then merged using a priority order based on quality to form the Multi-satellite Precipitation Analysis (MPA). Raingauge information is used to help constrain the satellite-based estimates over land. The TRMM standard research product (Version 6 3B-42 of the TRMM products) will be available for the entire TRMM period (January 1998-present) in 2004. The real-time version of this merged product has been produced over the past two years and is available on the U.S. TRMM web site (trmm.gsfc.nasa.gov) at 0.25" latitude-longitude resolution over the latitude range from 5O"N-5O0S. Validation of daily totals indicates good results, with limitations noted in mid-latitude winter over land and regions of shallow, orographic precipitation. Various applications of these estimates are described, including: 1) detecting potential floods in near real-time; 2) analyzing Indian Ocean precipitation variations related to the initiation of El Nino; 3) determining characteristics of the African monsoon; and 4) analysis of diurnal variations.

  4. Precipitation Analysis at Fine Time Scales using TRMM and Other Satellites: Real-time and Research Products and Applications

    Science.gov (United States)

    Adler, Robert; Huffman, George; Bolvin, David; Nelkin, Eric; Curtis, Scott; Pierce, Harold; Gu, Guo-Jon

    2004-01-01

    Quasi-global precipitation analyses at fine time scales (3-hr) are described. TRMM observations (radar and passive microwave) are used to calibrate polar-orbit microwave observations from SSM/I (and other satellites instruments, including AMSR and AMSU) and geosynchronous IR observations. The individual data sets are then merged using a priority order based on quality to form the TRMM Multi-satellite Precipitation Analysis (MPA). Raingauge information is used to help constrain the satellite-based estimates over land. The TRMM standard research product (Version 6 3B-42 of the TRMM products) will be available for the entire TRMM period (January 1998-present) by the end of 2004. The real-time version of this merged product has been produced over the past two years and is available on the U.S. TRMM web site (trmm.gsfc.nasa.gov) at 0.25" latitude-longitude resolution over the latitude range from 5O0N-50"S. Validation of daily totals indicates good results, with limitations noted in mid-latitude winter over land and regions of shallow, orographic precipitation. Various applications of these estimates are described, includmg: 1) detecting potential floods in near real-time; 2) analyzing Indian Ocean precipitation variations related to the initiation of El Nino; 3) determining characteristics of the African monsoon; and 4) analysis of diurnal variations.

  5. On the de Sitter and Nariai solutions in general relativity and their extension in higher dimensional space-time

    International Nuclear Information System (INIS)

    Nariai, Hidekazu; Ishihara, Hideki.

    1983-01-01

    Various geometrical properties of Nariai's less-familiar solution of the vacuum Einstein equations R sub( mu nu ) = lambda g sub( mu nu ) is f irst summarized in comparison with de Sitter's well-known solution. Next an extension of both solutions is performed in a six-dimensional space on the supposition that such an extension will in future become useful to elucidate more closely the creation of particles in an inflationary stage of the big-bang universe. For preparation, the behavior of a massive scalar field in the extended space-time is studied in a classical level. (author)

  6. Teachers' views of using e-learning for non-traditional students in higher education across three disciplines [nursing, chemistry and management] at a time of massification and increased diversity in higher education.

    Science.gov (United States)

    Allan, Helen T; O'Driscoll, Mike; Simpson, Vikki; Shawe, Jill

    2013-09-01

    The expansion of the higher educational sector in the United Kingdom over the last two decades to meet political aspirations of the successive governments and popular demand for participation in the sector (the Widening Participation Agenda) has overlapped with the introduction of e-learning. This paper describes teachers' views of using e-learning for non-traditional students in higher education across three disciplines [nursing, chemistry and management] at a time of massification and increased diversity in higher education. A three phase, mixed methods study; this paper reports findings from phase two of the study. One university in England. Higher education teachers teaching on the nursing, chemistry and management programmes. Focus groups with these teachers. Findings from these data show that teachers across the programmes have limited knowledge of whether students are non-traditional or what category of non-traditional status they might be in. Such knowledge as they have does not seem to influence the tailoring of teaching and learning for non-traditional students. Teachers in chemistry and nursing want more support from the university to improve their use of e-learning, as did teachers in management but to a lesser extent. Our conclusions confirm other studies in the field outside nursing which suggest that non-traditional students' learning needs have not been considered meaningfully in the development of e-learning strategies in universities. We suggest that this may be because teachers have been required to develop e-learning at the same time as they cope with the massification of, and widening participation in, higher education. The findings are of particular importance to nurse educators given the high number of non-traditional students on nursing programmes. Copyright © 2012 Elsevier Ltd. All rights reserved.

  7. Just-in-time research: a call to arms for research into mobile technologies in higher education

    Directory of Open Access Journals (Sweden)

    Lucie Byrne-Davis

    2015-04-01

    Full Text Available Mobile technologies are becoming commonplace in society and in education. In higher education, it is crucial to understand the impact of constant access to information on the development of the knowledge and competence of the learner. This study reports on a series of four surveys completed by UK-based medical students (n=443 who received tablet computers (iPads from their medical school during their 4th year of study. Students were surveyed prior to receiving the iPads and again regarding their usage and experiences at 2, 6 and 12 months post receipt of tablets. Findings indicate that students differed in their use of iPads but that the majority felt that tablets had impacted on their learning and the majority were using them frequently (at least once a day during learning. Almost half of the students reported that clinical supervisors had raised the possibility of tablets changing patient care. These results, although only descriptive, raise important questions about the impact of mobile technologies on learning.

  8. Ecuadorian youth, social and geographic mobility and higher education in Spain and Ecuador. Unequal educational trajectories in times of crises

    Directory of Open Access Journals (Sweden)

    Cristina Vega Solís

    2017-11-01

    Full Text Available In the paper we analyze the inequalities that emerge from and are reproduced in Ecuadorian’s higher education trajectories in the context of economic crises. We focus on the strategies that these youth and their families employ for social mobility as well as the role of public policy in these processes. We examine the trajectories of three groups: sons and daughters of the 2000 migration wave from Ecuador to Spain who study at universities in Spain, those who have returned to Ecuador for their studies, and Ecuadorians who move to Spain in order to carry out postgraduate studies, some of them funded by scholarships from the Ecuadorian government. The research project employed a qualitative methodology based on interviews, focus groups and a survey with Ecuadorians in Spain who took the entrance exam for admittance into Ecuador’s public university system. Our findings highlight the varied forms of capitals that these diverse students employ, as well as the social and economic constraints that they encounter. In a period of economic crisis in Spain, the first group of students must often downgrade their expectations in order to continue their studies. Their experience contrasts starkly with Ecuadorians undertaking postgraduate studies in Spain, whose heterogenous trajectories are upwardly and geographically mobile. The case of the return university students to Ecuador shows us that education is inserted into a broader strategy that depends on transnational networks shaped over more than a decade of Ecuador-Spain migration.

  9. Influence of cooking methods and storage time on lipid and protein oxidation and heterocyclic aromatic amines production in bacon.

    Science.gov (United States)

    Soladoye, O P; Shand, P; Dugan, M E R; Gariépy, C; Aalhus, J L; Estévez, M; Juárez, M

    2017-09-01

    This study aimed to examine the influence of cooking methods and pre-determined refrigerated storage days on the production of lipid oxidation (TBARS), protein oxidation (PROTOX) and heterocyclic aromatic amines (HAA) in bacon. Forty-four pork bellies selected from pigs varying in breed, sex and diets to introduce variability in composition were processed as bacon. Sliced-bacon was stored at 4°C either for 2 or 28days and these storage groups were cooked either with microwave or frying pan. Microwave led to significantly higher PROTOX (P0.05) by the cooking methods and storage times. Similarly, the fatty acid composition of pork belly did not significantly influence the production of HAA, TBARS and PROTOX produced in bacon during cooking. Overall, microwave cooking had lesser impact on the production of carcinogenic compounds in bacon with only minor impact on sensory attributes. Copyright © 2017. Published by Elsevier Ltd.

  10. Productivity for librarians how to get more done in less time

    CERN Document Server

    Hines, Samantha

    2010-01-01

    Productivity for Librarians provides tips and tools for organizing, prioritizing and managing time along with reducing stress. The book presents a resources guide for continued learning about and exploration of productivity in relation to individual circumstances featuring motivation, procrastination and time management guidelines. Addressing the unique challenges faced by librarians, the author supplies a balanced view of a variety of tools and techniques for dealing with overwork and stress.there are many books on productivity, but none specifically targeted at library workers. We face uniqu

  11. Characterizing Global Flood Wave Travel Times to Optimize the Utility of Near Real-Time Satellite Remote Sensing Products

    Science.gov (United States)

    Allen, G. H.; David, C. H.; Andreadis, K. M.; Emery, C. M.; Famiglietti, J. S.

    2017-12-01

    Earth observing satellites provide valuable near real-time (NRT) information about flood occurrence and magnitude worldwide. This NRT information can be used in early flood warning systems and other flood management applications to save lives and mitigate flood damage. However, these NRT products are only useful to early flood warning systems if they are quickly made available, with sufficient time for flood mitigation actions to be implemented. More specifically, NRT data latency, or the time period between the satellite observation and when the user has access to the information, must be less than the time it takes a flood to travel from the flood observation location to a given downstream point of interest. Yet the paradigm that "lower latency is always better" may not necessarily hold true in river systems due to tradeoffs between data latency and data quality. Further, the existence of statistical breaks in the global distribution of flood wave travel time (i.e. a jagged statistical distribution) would represent preferable latencies for river-observation NRT remote sensing products. Here we present a global analysis of flood wave velocity (i.e. flow celerity) and travel time. We apply a simple kinematic wave model to a global hydrography dataset and calculate flow wave celerity and travel time during bankfull flow conditions. Bankfull flow corresponds to the condition of maximum celerity and thus we present the "worst-case scenario" minimum flow wave travel time. We conduct a similar analysis with respect to the time it takes flood waves to reach the next downstream city, as well as the next downstream reservoir. Finally, we conduct these same analyses, but with regards to the technical capabilities of the planned Surface Water and Ocean Topography (SWOT) satellite mission, which is anticipated to provide waterbody elevation and extent measurements at an unprecedented spatial and temporal resolution. We validate these results with discharge records from paired

  12. The impact of product configurators on lead times in engineering-oriented companies

    DEFF Research Database (Denmark)

    Haug, Anders; Hvam, Lars; Mortensen, Niels Henrik

    2011-01-01

    This paper presents a study of how the use of product configurators affects business processes of engineering-oriented companies. A literature study shows that only a minor part of product configuration research deals with the effects of product configuration, and that the ones that do are mostly...... vague when reporting the effects of configurator projects. Only six cases were identified, which provide estimates of the actual size of lead time reduction achieved from product configurators. To broaden this knowledge, this paper presents the results of a study of 14 companies concerning the impact...

  13. Time of mowing and burning veld: short term effects on production ...

    African Journals Online (AJOL)

    In a comparison of mowing and burning as removal treatments in the Natal Tall Grassveld, mowing proved to be superior to burning in terms of sward productivity in the season following the removal treatment, but burning was responsible for a sward of higher protein content, at least during the early part of the season.

  14. Spinor Green function in higher-dimensional cosmic string space-time in the presence of magnetic flux

    International Nuclear Information System (INIS)

    Spinelly, J.; Mello, E.R. Bezerra de

    2008-01-01

    In this paper we investigate the vacuum polarization effects associated with quantum fermionic charged fields in a generalized (d+1)-dimensional cosmic string space-times considering the presence of a magnetic flux along the string. In order to develop this analysis we calculate a general expression for the respective Green function, valid for several different values of d, which is expressed in terms of a bispinor associated with the square of the Dirac operator. Adopting this result, we explicitly calculate the renormalized vacuum expectation values of the energy-momentum tensors, (T A B ) Ren. , associated with massless fields. Moreover, for specific values of the parameters which codify the cosmic string and the fractional part of the ratio of the magnetic flux by the quantum one, we were able to present in closed forms the bispinor and the respective Green function for massive fields.

  15. Use of dwell time concept in fission product inventory assessment for CANDU reactors

    International Nuclear Information System (INIS)

    Bae, C.J.; Choi, J.H.; Hwang, H.R.; Seo, J.T.

    2003-01-01

    A realistic approach in calculating the initial fission product inventory within the CANFLEX-NU fuel has been assessed for its applicability to the single channel event safety analysis for CANDU reactors. This approach is based on the dwell time concept in which the accident is assumed to occur at the dwell time when the summation of fission product inventory for all isotopes becomes largest. However, in the current conservative analysis, the maximum total inventory and the corresponding gap inventory for each isotope are used as the initial fission product inventories regardless of the accident initiation time. The fission product inventory analysis has been performed using ELESTRES code considering power histories and burnup of the fuel bundles in the limiting channel. The analysis results showed that the total fission product inventory is found to be largest at 20% dwell time. Therefore, the fission product inventory at 20% dwell time can be used as the initial condition for the single channel event for the CANDU 6 reactors. (author)

  16. Hydraulic conductance as well as nitrogen accumulation plays a role in the higher rate of leaf photosynthesis of the most productive variety of rice in Japan.

    Science.gov (United States)

    Taylaran, Renante D; Adachi, Shunsuke; Ookawa, Taiichiro; Usuda, Hideaki; Hirasawa, Tadashi

    2011-07-01

    An indica variety Takanari is known as one of the most productive rice varieties in Japan and consistently produces 20-30% heavier dry matter during ripening than Japanese commercial varieties in the field. The higher rate of photosynthesis of individual leaves during ripening has been recognized in Takanari. By using pot-grown plants under conditions of minimal mutual shading, it was confirmed that the higher rate of leaf photosynthesis is responsible for the higher dry matter production after heading in Takanari as compared with a japonica variety, Koshihikari. The rate of leaf photosynthesis and shoot dry weight became larger in Takanari after the panicle formation and heading stages, respectively, than in Koshihikari. Roots grew rapidly in the panicle formation stage until heading in Takanari compared with Koshihikari. The higher rate of leaf photosynthesis in Takanari resulted not only from the higher content of leaf nitrogen, which was caused by its elevated capacity for nitrogen accumulation, but also from higher stomatal conductance. When measured under light-saturated conditions, stomatal conductance was already decreased due to the reduction in leaf water potential in Koshihikari even under conditions of a relatively small difference in leaf-air vapour pressure difference. In contrast, the higher stomatal conductance was supported by the maintenance of higher leaf water potential through the higher hydraulic conductance in Takanari with the larger area of root surface. However, no increase in root hydraulic conductivity was expected in Takanari. The larger root surface area of Takanari might be a target trait in future rice breeding for increasing dry matter production.

  17. The maize INDETERMINATE1 flowering time regulator defines a highly conserved zinc finger protein family in higher plants

    Directory of Open Access Journals (Sweden)

    Colasanti Joseph

    2006-06-01

    Full Text Available Abstract Background The maize INDETERMINATE1 gene, ID1, is a key regulator of the transition to flowering and the founding member of a transcription factor gene family that encodes a protein with a distinct arrangement of zinc finger motifs. The zinc fingers and surrounding sequence make up the signature ID domain (IDD, which appears to be found in all higher plant genomes. The presence of zinc finger domains and previous biochemical studies showing that ID1 binds to DNA suggests that members of this gene family are involved in transcriptional regulation. Results Comparison of IDD genes identified in Arabidopsis and rice genomes, and all IDD genes discovered in maize EST and genomic databases, suggest that ID1 is a unique member of this gene family. High levels of sequence similarity amongst all IDD genes from maize, rice and Arabidopsis suggest that they are derived from a common ancestor. Several unique features of ID1 suggest that it is a divergent member of the maize IDD family. Although no clear ID1 ortholog was identified in the Arabidopsis genome, highly similar genes that encode proteins with identity extending beyond the ID domain were isolated from rice and sorghum. Phylogenetic comparisons show that these putative orthologs, along with maize ID1, form a group separate from other IDD genes. In contrast to ID1 mRNA, which is detected exclusively in immature leaves, several maize IDD genes showed a broad range of expression in various tissues. Further, Western analysis with an antibody that cross-reacts with ID1 protein and potential orthologs from rice and sorghum shows that all three proteins are detected in immature leaves only. Conclusion Comparative genomic analysis shows that the IDD zinc finger family is highly conserved among both monocots and dicots. The leaf-specific ID1 expression pattern distinguishes it from other maize IDD genes examined. A similar leaf-specific localization pattern was observed for the putative ID1 protein

  18. Re-orientating time in product design : a phenomenology-inspired perspective

    NARCIS (Netherlands)

    Stienstra, J.T.; Hengeveld, B.J.; Hummels, C.C.M.

    2015-01-01

    This paper presents a work in progress design case that is used to exemplify how a phenomenology-inspired perspective on time can impact the design of highly interactive systems and products. The design presents a calendar with a re-orientated layout that is based on a bodily relationship with time,

  19. Estimating primary production from oxygen time series: A novel approach in the frequency domain

    NARCIS (Netherlands)

    Cox, T.J.S.; Maris, T.; Soetaert, K.; Kromkamp, J.C.; Meire, P.; Meysman, F.J.R.

    2015-01-01

    Based on an analysis in the frequency domain of the governing equation of oxygen dynamics in aquatic systems, we derive a new method for estimating gross primary production (GPP) from oxygen time series. The central result of this article is a relation between time averaged GPP and the amplitude of

  20. Allocation and Productivity of Time in New Ventures of Female and Male Entrepreneurs

    NARCIS (Netherlands)

    I. Verheul (Ingrid); M.A. Carree (Martin); A.R. Thurik (Roy)

    2007-01-01

    textabstractThis paper investigates time allocation decisions in new ventures of female and male entrepreneurs using a model that distinguishes between effects of preferences and productivity on the number of working hours. Using data of 1,158 entrepreneurs we find that the preference for work time

  1. Allocation and productivity of time in new ventures of female and male entrepreneurs

    NARCIS (Netherlands)

    I. Verheul (Ingrid); M.A. Carree (Martin); A.R. Thurik (Roy)

    2009-01-01

    textabstractThis paper investigates time allocation decisions in new ventures of female and male entrepreneurs using a model that distinguishes between effects of preferences and productivity on the number of working hours. Using data of 1,158 entrepreneurs we find that the preference for work time

  2. E6 unification model building. III. Clebsch-Gordan coefficients in E6 tensor products of the 27 with higher dimensional representations

    International Nuclear Information System (INIS)

    Anderson, Gregory W.; Blazek, Tomas

    2005-01-01

    E 6 is an attractive group for unification model building. However, the complexity of a rank 6 group makes it nontrivial to write down the structure of higher dimensional operators in an E 6 theory in terms of the states labeled by quantum numbers of the standard model gauge group. In this paper, we show the results of our computation of the Clebsch-Gordan coefficients for the products of the 27 with irreducible representations of higher dimensionality: 78, 351, 351 ' , 351, and 351 ' . Application of these results to E 6 model building involving higher dimensional operators is straightforward

  3. Analysis of the Main Factors Influencing Food Production in China Based on Time Series Trend Chart

    Institute of Scientific and Technical Information of China (English)

    Shuangjin; WANG; Jianying; LI

    2014-01-01

    Based on the annual sample data on food production in China since the reform and opening up,we select 8 main factors influencing the total food production( growing area,application rate of chemical fertilizer,effective irrigation area,the affected area,total machinery power,food production cost index,food production price index,financial funds for supporting agriculture,farmers and countryside),and put them into categories of material input,resources and environment,and policy factors. Using the factor analysis,we carry out the multi-angle analysis of these typical influencing factors one by one through the time series trend chart. It is found that application rate of chemical fertilizer,the growing area of food crops and drought-affected area become the key factors affecting food production. On this basis,we set forth the corresponding recommendations for improving the comprehensive food production capacity.

  4. International Organizations (IOs), Epistemic Tools of Influence, and the Colonial Geopolitics of Knowledge Production in Higher Education Policy

    Science.gov (United States)

    Shahjahan, Riyad A.

    2016-01-01

    While other scholars have analyzed the way that international organizations (IOs) in higher education policy may contribute to neocolonial domination, this paper illuminates not only on "how" IOs' epistemic activities promulgate one-size fit all solutions, but centers the colonial structures of knowledge/power that inform the…

  5. The Web as process tool and product environment for group-based project work in higher education

    NARCIS (Netherlands)

    Collis, Betty; Andernach, Toine; van Diepen, N.M.; Maurer, Hermann

    1996-01-01

    This paper discusses problems confronting the use of group-based project work as an instructional strategy in higher education, and describes two technical courses (i.e., courses in online learning and applications of business information technology) at the University of Twente (Netherlands) in

  6. Late time acceleration of the 3-space in a higher dimensional steady state universe in dilaton gravity

    International Nuclear Information System (INIS)

    Akarsu, Özgür; Dereli, Tekin

    2013-01-01

    We present cosmological solutions for (1+3+n)-dimensional steady state universe in dilaton gravity with an arbitrary dilaton coupling constant w and exponential dilaton self-interaction potentials in the string frame. We focus particularly on the class in which the 3-space expands with a time varying deceleration parameter. We discuss the number of the internal dimensions and the value of the dilaton coupling constant to determine the cases that are consistent with the observed universe and the primordial nucleosynthesis. The 3-space starts with a decelerated expansion rate and evolves into accelerated expansion phase subject to the values of w and n, but ends with a Big Rip in all cases. We discuss the cosmological evolution in further detail for the cases w = 1 and w = ½ that permit exact solutions. We also comment on how the universe would be conceived by an observer in four dimensions who is unaware of the internal dimensions and thinks that the conventional general relativity is valid at cosmological scales

  7. Late time acceleration of the 3-space in a higher dimensional steady state universe in dilaton gravity

    Science.gov (United States)

    Akarsu, Özgür; Dereli, Tekin

    2013-02-01

    We present cosmological solutions for (1+3+n)-dimensional steady state universe in dilaton gravity with an arbitrary dilaton coupling constant w and exponential dilaton self-interaction potentials in the string frame. We focus particularly on the class in which the 3-space expands with a time varying deceleration parameter. We discuss the number of the internal dimensions and the value of the dilaton coupling constant to determine the cases that are consistent with the observed universe and the primordial nucleosynthesis. The 3-space starts with a decelerated expansion rate and evolves into accelerated expansion phase subject to the values of w and n, but ends with a Big Rip in all cases. We discuss the cosmological evolution in further detail for the cases w = 1 and w = ½ that permit exact solutions. We also comment on how the universe would be conceived by an observer in four dimensions who is unaware of the internal dimensions and thinks that the conventional general relativity is valid at cosmological scales.

  8. Do new production concepts and a new management of employment relations, yield higher employee performance and low job strain?

    NARCIS (Netherlands)

    Kraan, K.; Oeij, P.

    2006-01-01

    In this article old versus new production concepts (NPCs) and employment relation instruments, are studied, separately and in combination, to find out which yield high employee performance and low job strain. Therefore, in 2005, TNO conducted coupled surveys among 149 supervisors and employees. In

  9. Raising Research Productivity in a Post-Soviet Higher Education System:A Case from Central Asia

    Science.gov (United States)

    Kuzhabekova, Aliya; Ruby, Alan

    2018-01-01

    To raise university research productivity, the government of Kazakhstan introduced a requirement for university faculty members to publish in journals with a nonzero impact factor in order to qualify for promotion. A survey of faculty members at six universities was conducted to explore their response to the policy. The results suggest that a…

  10. Single product lot-sizing on unrelated parallel machines with non-decreasing processing times

    Science.gov (United States)

    Eremeev, A.; Kovalyov, M.; Kuznetsov, P.

    2018-01-01

    We consider a problem in which at least a given quantity of a single product has to be partitioned into lots, and lots have to be assigned to unrelated parallel machines for processing. In one version of the problem, the maximum machine completion time should be minimized, in another version of the problem, the sum of machine completion times is to be minimized. Machine-dependent lower and upper bounds on the lot size are given. The product is either assumed to be continuously divisible or discrete. The processing time of each machine is defined by an increasing function of the lot volume, given as an oracle. Setup times and costs are assumed to be negligibly small, and therefore, they are not considered. We derive optimal polynomial time algorithms for several special cases of the problem. An NP-hard case is shown to admit a fully polynomial time approximation scheme. An application of the problem in energy efficient processors scheduling is considered.

  11. An economic production model for deteriorating items and time dependent demand with rework and multiple production setups

    Science.gov (United States)

    Uthayakumar, R.; Tharani, S.

    2017-12-01

    Recently, much emphasis has given to study the control and maintenance of production inventories of the deteriorating items. Rework is one of the main issues in reverse logistic and green supply chain, since it can reduce production cost and the environmental problem. Many researchers have focused on developing rework model, but few of them have developed model for deteriorating items. Due to this fact, we take up productivity and rework with deterioration as the major concern in this paper. In this paper, a production-inventory model with deteriorative items in which one cycle has n production setups and one rework setup (n, 1) policy is considered for deteriorating items with stock-dependent demand in case 1 and exponential demand in case 2. An effective iterative solution procedure is developed to achieve optimal time, so that the total cost of the system is minimized. Numerical and sensitivity analyses are discussed to examine the outcome of the proposed solution procedure presented in this research.

  12. Ultrasonic sludge disintegration for enhanced methane production in anaerobic digestion: effects of sludge hydrolysis efficiency and hydraulic retention time.

    Science.gov (United States)

    Kim, Dong-Jin; Lee, Jonghak

    2012-01-01

    Hydrolysis of waste activated sludge (WAS) has been regarded as the rate limiting step of anaerobic sludge digestion. Therefore, in this study, the effect of ultrasound and hydraulic residence time during sludge hydrolysis was investigated with the goal of enhancing methane production from anaerobic digestion (AD). WAS was ultrasonically disintegrated for hydrolysis, and it was semi-continuously fed to an anaerobic digesters at various hydraulic retention times (HRTs). The results of these experiments showed that the solids and chemical oxygen demand (COD) removal efficiencies when using ultrasonically disintegrated sludge were higher during AD than the control sludge. The longer the HRT, the higher the removal efficiencies of solids and COD, while methane production increased with lower HRT. Sludge with 30% hydrolysis produced 7 × more methane production than the control sludge. The highest methane yields were 0.350 m(3)/kg volatile solids (VS)(add) and 0.301 m(3)/kg COD(con) for 16 and 30% hydrolyzed sludge, respectively. In addition, we found that excess ultrasound irradiation may inhibit AD since the 50% hydrolyzed sludge produced lower methane yields than 16 and 30% hydrolyzed sludge.

  13. Global Near Real-Time MODIS and Landsat Flood Mapping and Product Delivery

    Science.gov (United States)

    Policelli, F. S.; Slayback, D. A.; Tokay, M. M.; Brakenridge, G. R.

    2014-12-01

    Flooding is the most destructive, frequent, and costly natural disaster faced by modern society, and is increasing in frequency and damage (deaths, displacements, and financial costs) as populations increase and climate change generates more extreme weather events. When major flooding events occur, the disaster management community needs frequently updated and easily accessible information to better understand the extent of flooding and coordinate response efforts. With funding from NASA's Applied Sciences program, we developed and are now operating a near real-time global flood mapping system to help provide flood extent information within 24-48 hours of events. The principal element of the system applies a water detection algorithm to MODIS imagery, which is processed by the LANCE (Land Atmosphere Near real-time Capability for EOS) system at NASA Goddard within a few hours of satellite overpass. Using imagery from both the Terra (10:30 AM local time overpass) and Aqua (1:30 PM) platforms allows the system to deliver an initial daily assessment of flood extent by late afternoon, and more robust assessments after accumulating cloud-free imagery over several days. Cloud cover is the primary limitation in detecting surface water from MODIS imagery. Other issues include the relatively coarse scale of the MODIS imagery (250 meters) for some events, the difficulty of detecting flood waters in areas with continuous canopy cover, confusion of shadow (cloud or terrain) with water, and accurately identifying detected water as flood as opposed to normal water extent. We are working on improvements to address these limitations. We have also begun delivery of near real time water maps at 30 m resolution from Landsat imagery. Although Landsat is not available daily globally, but only every 8 days if imagery from both operating platforms (Landsat 7 and 8) is accessed, it can provide useful higher resolution data on water extent when a clear acquisition coincides with an active

  14. The Effect Of Resting Time To Work Productivity On Surya Hutani Jaya Company

    Directory of Open Access Journals (Sweden)

    Purbawati

    2015-08-01

    Full Text Available Purbawati Rachmat M Ruslim Y B.D.A.S.Simarangkir. 2016. The Effect of resting time to work produktivity to the activity of Seedling Eucalyptus Pellitawith mini cutting.Productivity is the ratio between the output and the input. Rated productivity indicates how effectively the production process has been empowered to increase the output and how efficiently are also sources of input has been successfully saved. Many factors can affect productivity example is the resting time factor. In this study which examined is how the influence of rest periods of the Productivity and how much the standard output produced by the female labor force.Research conducted on women workers who are working at the cutting shoots cutting house.Nurseries with mini cutting process is done by cutting the of the leaves on each leaf so that the remaining 2 to 3 pairs of strands shoots that have undergone a process of cutting in its leaves called ready plant bud shoot. Ready plant bud is the output of this research while the input is the time used to do the cutting. This study aims to determine the influence of rest periods of the productivity of female workers and to determine the standard output produced by the female labor force. Data processing method used is the partial productivity measurement methods and measurement methods of working time. The results stated that the amount of labor productivity of women without giving time off is 0.0911 shoots second -1 whereas labor productivity by granting time off for 5 minutes every hour C1 by granting a 10 minute break every two hours C2 by granting time off for 30 minutes per one working day C3 by granting time off for 60 minutes per one working day C4 and the provision of rest periods combined mixed which is 5 minutes every hour and 60 minutes per one working day C5 respectively is 00908 shoots second -1 0.0761 shoots second-1 0.0972 shoots second-1 0.0857 shoots second-1 and 0.0860 shoots second -1. The calculation output

  15. Production characteristics of the "higher plants-soil-like substrate" system as an element of the bioregenerative life support system

    Science.gov (United States)

    Velichko, V. V.; Tikhomirov, A. A.; Ushakova, S. A.; Tikhomirova, N. A.; Shihov, V. N.; Tirranen, L. S.; Gribovskaya, I. A.

    2013-01-01

    The study addresses the possibility of long-duration operation of a higher plant conveyor, using a soil-like substrate (SLS) as the root zone. Chufa (Cyperus esculentus L.), radish (Raphanus sativus L.), and lettuce (Lactuca sativa L.) were used as study material. A chufa community consisting of 4 age groups and radish and lettuce communities consisting of 2 age groups were irrigated with a nutrient solution, which contained mineral elements extracted from the SLS. After each harvest, inedible biomass of the harvested plants and inedible biomasses of wheat and saltwort were added to the SLS. The amounts of the inedible biomasses of wheat and saltwort to be added to the SLS were determined based on the nitrogen content of the edible mass of harvested plants. CO2 concentration in the growth chamber was maintained within the range of 1100-1700 ppm. The results of the study show that higher plants can be grown quite successfully using the proposed process of plant waste utilization in the SLS. The addition of chufa inedible biomass to the SLS resulted in species-specific inhibition of growth of both cultivated crops and microorganisms in the "higher plants - SLS" system. There were certain differences between the amounts of some mineral elements removed from the SLS with the harvested edible biomass and those added to it with the inedible biomasses of wheat and saltwort.

  16. Delimbing and Cross-cutting of Coniferous Trees–Time Consumption, Work Productivity and Performance

    Directory of Open Access Journals (Sweden)

    Arcadie Ciubotaru

    2018-04-01

    Full Text Available This research established the time consumption, work time structure, and productivity for primary processing in felling areas of coniferous trees felled with a chainsaw. Delimbing and partial cross-cutting were taken into consideration. The research was conducted in a mixed spruce and fir tree stand situated in the Carpathian Mountains. The team of workers consisted of a chainsaw operator and assistant with over 10 years of experience. The results indicated a total time of 536.32 s·m−3 (1145.26 s·tree−1, work performance (including delays of 6.716 m3·h−1 (3.14 tree·h−1, and work productivity (without delays of 35.459 m3·h−1 (16.58 tree·h−1. The chainsaw productivity during tree cross-cutting was 82.29 cm2·s−1. Delimbing accounted for 96.18% of the real work time, while cross-cutting accounted for 3.82%. The time consumption for delimbing and cross-cutting, as well as the work productivity and performance in the primary processing of coniferous trees in the felling area, were influenced by the breast height diameter, stem length, and tree volume, while the chainsaw productivity was influenced by the diameter of the cross-cut sections. The relationships between the aforementioned dependent and independent variables were determined by simple and linear multiple regression equations.

  17. Multilevel Production Systems with Dependent Demand with Uncertainty of Lead Times

    Directory of Open Access Journals (Sweden)

    Haibatolah Sadeghi

    2016-01-01

    Full Text Available This study considers a multilevel assembly system with several components in each sublevel. It is assumed that actual lead time for all components is probabilistic; and periodic order quantity (POQ policy for ordering is utilized. If at a certain level a job is not received at the expected time, a delay is incurred at the delivery of production at this level and this may result in backorders of the finished product. It is assumed in this case that a fixed percentage of the shortage is backlogged and other sales are lost. In the real situation, some but not all customers will wait for backlogged components during a period of shortage, such as for fashionable commodities or high-tech products with the short product life cycle. The objective of this study is to find the planned lead time and periodicity for the total components in order to minimize the expected fixed ordering, holding, and partial backlogging costs for the finished product. In this study, it is assumed that a percentage of components at each level are scrap. A general mathematical model is suggested and the method developed can be used for optimization planned lead time and periodicity for such an MRP system under lead time uncertainties.

  18. Improving Post-Hurricane Katrina Forest Management with MODIS Time Series Products

    Science.gov (United States)

    Lewis, Mark David; Spruce, Joseph; Evans, David; Anderson, Daniel

    2012-01-01

    Hurricane damage to forests can be severe, causing millions of dollars of timber damage and loss. To help mitigate loss, state agencies require information on location, intensity, and extent of damaged forests. NASA's MODerate Resolution Imaging Spectroradiometer (MODIS) Normalized Difference Vegetation Index (NDVI) time series data products offers a potential means for state agencies to monitor hurricane-induced forest damage and recovery across a broad region. In response, a project was conducted to produce and assess 250 meter forest disturbance and recovery maps for areas in southern Mississippi impacted by Hurricane Katrina. The products and capabilities from the project were compiled to aid work of the Mississippi Institute for Forest Inventory (MIFI). A series of NDVI change detection products were computed to assess hurricane induced damage and recovery. Hurricane-induced forest damage maps were derived by computing percent change between MODIS MOD13 16-day composited NDVI pre-hurricane "baseline" products (2003 and 2004) and post-hurricane NDVI products (2005). Recovery products were then computed in which post storm 2006, 2007, 2008 and 2009 NDVI data was each singularly compared to the historical baseline NDVI. All percent NDVI change considered the 16-day composite period of August 29 to September 13 for each year in the study. This provided percent change in the maximum NDVI for the 2 week period just after the hurricane event and for each subsequent anniversary through 2009, resulting in forest disturbance products for 2005 and recovery products for the following 4 years. These disturbance and recovery products were produced for the Mississippi Institute for Forest Inventory's (MIFI) Southeast Inventory District and also for the entire hurricane impact zone. MIFI forest inventory products were used as ground truth information for the project. Each NDVI percent change product was classified into 6 categories of forest disturbance intensity. Stand age

  19. Continuing professional education: Motivations and experiences of health and social care professional's part-time study in higher education. A qualitative literature review.

    Science.gov (United States)

    Burrow, Simon; Mairs, Hilary; Pusey, Helen; Bradshaw, Timothy; Keady, John

    2016-11-01

    To understand the motivations and experiences of health and social care professionals undertaking part-time, accredited, continuing professional education in higher education. A review following systematic principles. Systematic searches for literature published between January 2000 and December 2015 using the databases: SCOPUS, Web of Science, Medline, PsychINFO, Social Policy and Practice and CINAHL. Studies were included if they were published in the English language and were qualitative in design, focussing on the motivations and experiences of staff engaged in part-time, accredited, higher education study. Three reviewers appraised the quality of the selected studies. Thirteen qualitative studies were identified for the review. Motivating factors for staff to engage in part-time, accredited, continuing professional development study included: personal and professional drivers, influence of workplace/management and funding and availability. Key themes in relation to how staff experienced study included: the demands of adjusting to the academic requirements of higher education study; the experience of juggling competing demands of study, work and family; and the presence or absence of support for part-time study in the personal and professional arenas. Health and social care professionals experience a number of challenges when engaging in part-time, continuing professional education in higher education institutions. A significant challenge is the juggling of competing demands of study, work and family, and this may have a negative impact on learning. Research is needed to inform how higher education can address the specific learning needs of this population and develop pedagogic approaches that are both responsive to need and support of effective learning. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. Real-Time Shop-Floor Production Performance Analysis Method for the Internet of Manufacturing Things

    Directory of Open Access Journals (Sweden)

    Yingfeng Zhang

    2014-04-01

    Full Text Available Typical challenges that manufacturing enterprises are facing now are compounded by lack of timely, accurate, and consistent information of manufacturing resources. As a result, it is difficult to analyze the real-time production performance for the shop-floor. In this paper, the definition and overall architecture of the internet of manufacturing things is presented to provide a new paradigm by extending the techniques of internet of things (IoT to manufacturing field. Under this architecture, the real-time primitive events which occurred at different manufacturing things such as operators, machines, pallets, key materials, and so forth can be easily sensed. Based on these distributed primitive events, a critical event model is established to automatically analyze the real-time production performance. Here, the up-level production performance analysis is regarded as a series of critical events, and the real-time value of each critical event can be easily calculated according to the logical and sequence relationships among these multilevel events. Finally, a case study is used to illustrate how to apply the designed methods to analyze the real-time production performance.

  1. Pair production in an electric field in a time-dependent gauge

    International Nuclear Information System (INIS)

    Barut, A.O.; Duru, I.H.

    1989-07-01

    A new nonperturbative method of calculation of the pair production in a constant electric field is presented in which the propagator is evaluated entirely by path-integration in a time-dependent potential. This gauge and the path integration correctly define all the normalizations. As a by-product we get also the Unruh formula since the constant electric field provides an accelerated frame. (author). 11 refs

  2. Analysis of phosphatidylcholine oxidation products in human plasma using quadrupole time-of flight mass spectrometry

    OpenAIRE

    Adachi, Junko; Asano, Migiwa; Yoshioka, Naoki; Nushida, Hideyuki; Ueno, Yasuhiro

    2006-01-01

    We report here an application of the previous method for the analysis ofphosphatidylcholine (PC) and lysophosphatidylcholine (lysoPC) oxidation products inhuman plasma using quadrupole time of flight (Q-TOF) mass spectrometry withelectrospray ionization. We separated these products using an HPLC C8 column witha gradient of methanol and 10 mM aqueous ammonium acetate. Monohydroperoxides,epoxyhydroxy derivatives, oxo derivatives, and trihydroxides of palmitoyl-linoleoyl(C16:0/C18:2) PC and stea...

  3. Pair production of Dirac particles in a d + 1-dimensional noncommutative space-time

    Energy Technology Data Exchange (ETDEWEB)

    Ousmane Samary, Dine [Perimeter Institute for Theoretical Physics, Waterloo, ON (Canada); University of Abomey-Calavi, International Chair in Mathematical Physics and Applications (ICMPA-UNESCO Chair), Cotonou (Benin); N' Dolo, Emanonfi Elias; Hounkonnou, Mahouton Norbert [University of Abomey-Calavi, International Chair in Mathematical Physics and Applications (ICMPA-UNESCO Chair), Cotonou (Benin)

    2014-11-15

    This work addresses the computation of the probability of fermionic particle pair production in d + 1-dimensional noncommutative Moyal space. Using Seiberg-Witten maps, which establish relations between noncommutative and commutative field variables, up to the first order in the noncommutative parameter θ, we derive the probability density of vacuum-vacuum pair production of Dirac particles. The cases of constant electromagnetic, alternating time-dependent, and space-dependent electric fields are considered and discussed. (orig.)

  4. A study of the border between the domains of production and acquisition of knowledge in higher education

    DEFF Research Database (Denmark)

    Busch, Henrik

    2001-01-01

    This paper focuses on a common feature of most undergraduate studies in science - the pronounced border between the domains of production and acquisition of knowledge. Under¬graduate students' learning activities and settings are characterized by little inter¬action with the community of practicing...... scientists. Based on ongoing ethnographic field work, certain aspects of this division between the two domains are discussed from an educational point of view. A case study is presented and leads to considerations about undergraduate students' access to the culture of practicing physicists....

  5. A television in the bedroom is associated with higher weekday screen time among youth with attention deficit hyperactivity disorder (ADD/ADHD)

    OpenAIRE

    Lo, Charmaine B.; Waring, Molly E.; Pagoto, Sherry L.; Lemon, Stephenie C.

    2015-01-01

    Objective: A TV in the bedroom has been associated with screen time in youth. Youth with attention deficit hyperactivity disorder (ADD/ADHD) have higher rates of screen time, but associations with bedroom TVs are unknown in this population. We examined the association of having a bedroom TV with screen time among youth with ADD/ADHD. Methods: Data were from the 2007 National Survey of Children's Health. Youth 6–17 years whose parent/guardian reported a physician's diagnosis of ADD/ADHD (n ...

  6. String Chopping and Time-ordered Products of Linear String-localized Quantum Fields

    Science.gov (United States)

    Cardoso, Lucas T.; Mund, Jens; Várilly, Joseph C.

    2018-03-01

    For a renormalizability proof of perturbative models in the Epstein-Glaser scheme with string-localized quantum fields, one needs to know what freedom one has in the definition of time-ordered products of the interaction Lagrangian. This paper provides a first step in that direction. The basic issue is the presence of an open set of n-tuples of strings which cannot be chronologically ordered. We resolve it by showing that almost all such string configurations can be dissected into finitely many pieces which can indeed be chronologically ordered. This fixes the time-ordered products of linear field factors outside a nullset of string configurations. (The extension across the nullset, as well as the definition of time-ordered products of Wick monomials, will be discussed elsewhere).

  7. Harbor porpoise clicks do not have conditionally minimum time bandwidth product

    DEFF Research Database (Denmark)

    Beedholm, Kristian

    2008-01-01

    The hypothesis that odontocete clicks have minimal time frequency product given their delay and center frequency values is tested by using an in-phase averaged porpoise click compared with a pure tone weighted with the same envelope. These signals have the same delay and the same center frequency...... values but the time bandwidth product of the artificial click is only 0.76 that of the original. Therefore signals with the same parameters exist that have a lower time bandwidth product. The observation that porpoise clicks are in fact minimum phase is confirmed for porpoise clicks and this property...... is argued to be incompatible with optimal reception, if auditory filters are also minimum phase....

  8. Earlier production, more and heavier fruits: The higher the haze, the greater the extra production (interview with Jan Janse and Sonny Moerenhout)

    NARCIS (Netherlands)

    Kierkels, T.; Janse, J.; Moerenhout, S.

    2012-01-01

    Early cucumbers grown under diffuse glass have a larger yield than those grown under normal glass right from the start of the cultivation. Following a series of trials carried out over the last few years, Jan Janse of Wageningen UR Greenhouse Horticulture concludes: the higher the haze, the greater

  9. A double-edged sword: the effects of challenge and hindrance time pressure on new product development teams

    NARCIS (Netherlands)

    Chong, D.S.F.; van Eerde, W.; Chai, K.H.; Rutte, C.G.

    2011-01-01

    Bringing new products to market requires team effort. New product development teams often face demanding schedules and high deliverable expectations, making time pressure a common experience at the workplace. Past literature have generally associated the relationship between time pressure and

  10. Order Level Inventory Models for Deteriorating Seasonable/Fashionable Products with Time Dependent Demand and Shortages

    Directory of Open Access Journals (Sweden)

    K. Skouri

    2009-01-01

    Full Text Available An order level inventory model for seasonable/fashionable products subject to a period of increasing demand followed by a period of level demand and then by a period of decreasing demand rate (three branches ramp type demand rate is considered. The unsatisfied demand is partially backlogged with a time dependent backlogging rate. In addition, the product deteriorates with a time dependent, namely, Weibull, deterioration rate. The model is studied under the following different replenishment policies: (a starting with no shortages and (b starting with shortages. The optimal replenishment policy for the model is derived for both the above mentioned policies.

  11. Saccharomyces kudriavzevii and Saccharomyces uvarum differ from Saccharomyces cerevisiae during the production of aroma-active higher alcohols and acetate esters using their amino acidic precursors.

    Science.gov (United States)

    Stribny, Jiri; Gamero, Amparo; Pérez-Torrado, Roberto; Querol, Amparo

    2015-07-16

    Higher alcohols and acetate esters are important flavour and aroma components in the food industry. In alcoholic beverages these compounds are produced by yeast during fermentation. Although Saccharomyces cerevisiae is one of the most extensively used species, other species of the Saccharomyces genus have become common in fermentation processes. This study analyses and compares the production of higher alcohols and acetate esters from their amino acidic precursors in three Saccharomyces species: Saccharomyces kudriavzevii, Saccharomyces uvarum and S. cerevisiae. The global volatile compound analysis revealed that S. kudriavzevii produced large amounts of higher alcohols, whereas S. uvarum excelled in the production of acetate esters. Particularly from phenylalanine, S. uvarum produced the largest amounts of 2-phenylethyl acetate, while S. kudriavzevii obtained the greatest 2-phenylethanol formation from this precursor. The present data indicate differences in the amino acid metabolism and subsequent production of flavour-active higher alcohols and acetate esters among the closely related Saccharomyces species. This knowledge will prove useful for developing new enhanced processes in fragrance, flavour, and food industries. Copyright © 2015. Published by Elsevier B.V.

  12. Analysis of oil-pipeline distribution of multiple products subject to delivery time-windows

    Science.gov (United States)

    Jittamai, Phongchai

    This dissertation defines the operational problems of, and develops solution methodologies for, a distribution of multiple products into oil pipeline subject to delivery time-windows constraints. A multiple-product oil pipeline is a pipeline system composing of pipes, pumps, valves and storage facilities used to transport different types of liquids. Typically, products delivered by pipelines are petroleum of different grades moving either from production facilities to refineries or from refineries to distributors. Time-windows, which are generally used in logistics and scheduling areas, are incorporated in this study. The distribution of multiple products into oil pipeline subject to delivery time-windows is modeled as multicommodity network flow structure and mathematically formulated. The main focus of this dissertation is the investigation of operating issues and problem complexity of single-source pipeline problems and also providing solution methodology to compute input schedule that yields minimum total time violation from due delivery time-windows. The problem is proved to be NP-complete. The heuristic approach, a reversed-flow algorithm, is developed based on pipeline flow reversibility to compute input schedule for the pipeline problem. This algorithm is implemented in no longer than O(T·E) time. This dissertation also extends the study to examine some operating attributes and problem complexity of multiple-source pipelines. The multiple-source pipeline problem is also NP-complete. A heuristic algorithm modified from the one used in single-source pipeline problems is introduced. This algorithm can also be implemented in no longer than O(T·E) time. Computational results are presented for both methodologies on randomly generated problem sets. The computational experience indicates that reversed-flow algorithms provide good solutions in comparison with the optimal solutions. Only 25% of the problems tested were more than 30% greater than optimal values and

  13. Two bee-pollinated plant species show higher seed production when grown in gardens compared to arable farmland.

    Directory of Open Access Journals (Sweden)

    John Cussans

    2010-07-01

    Full Text Available Insect pollinator abundance, in particular that of bees, has been shown to be high where there is a super-abundance of floral resources; for example in association with mass-flowering crops and also in gardens where flowering plants are often densely planted. Since land management affects pollinator numbers, it is also likely to affect the resultant pollination of plants growing in these habitats. We hypothesised that the seed or fruit set of two plant species, typically pollinated by bumblebees and/or honeybees might respond in one of two ways: 1 pollination success could be reduced when growing in a floriferous environment, via competition for pollinators, or 2 pollination success could be enhanced because of increased pollinator abundance in the vicinity.We compared the pollination success of experimental plants of Glechoma hederacea L. and Lotus corniculatus L. growing in gardens and arable farmland. On the farms, the plants were placed either next to a mass-flowering crop (oilseed rape, Brassica napus L. or field beans, Vicia faba L. or next to a cereal crop (wheat, Triticum spp.. Seed set of G. hederacea and fruit set of L. corniculatus were significantly higher in gardens compared to arable farmland. There was no significant difference in pollination success of G. hederacea when grown next to different crops, but for L. corniculatus, fruit set was higher in the plants growing next to oilseed rape when the crop was in flower.The results show that pollination services can limit fruit set of wild plants in arable farmland, but there is some evidence that the presence of a flowering crop can facilitate their pollination (depending on species and season. We have also demonstrated that gardens are not only beneficial to pollinators, but also to the process of pollination.

  14. Higher efficiency of steam flooding projects with horizontal production wells; Verbesserung der Effizienz von Dampfflutprojekten durch horizontale Foerderbohrungen

    Energy Technology Data Exchange (ETDEWEB)

    Leonhardt, B. [Wintershall AG Erdoelwerke, Barnstorf (Germany)

    2001-07-01

    For 50 years, the Emlichheim oil field has had a production level of about 150,000 t.p.a. of crude oil. Reinjection of deposit water was started in 1952 already in order to maintain the required pressure. Until 1997, all wells were sunk vertically as the loose sandstone was considered unstable. The Emlichheim 300 well was constructed in 1999; it was the first horizontal well that proved that horizontal drilling is possible in this bedrock material. The contribution describes the history of this field and the projecting and implementation of a steam flooding project involving horizontal production wells. [German] Das Erdoelfeld Emlichheim weist seit nunmehr 50 Jahren ein Foerderplateau von rund 150.000 Jahrestonnen Reinoel auf. Nach der Produktionsaufnahme in 1944 wurde dieses Niveau erstmals 1950 erreicht. Bereits 1952 musste zur Druckerhaltung mit der Reinjektion von Lagerstaettenwasser begonnen werden. Bis 1997 wurden alle Bohrungen im Erdoelfeld Emlichheim vertikal abgeteuft. Als groesstes Problem fuer Horizontalbohrungen wurde die Bohrlochstabilitaet in der Bohr- und Komplettierungsphase erachtet, da der Bentheimer Sandstein unverfestigt ist. Mit dem Abteufen der Emlichheim 300 im Jahre 1999 wurde der Nachweis erbracht, dass das Bohren und Komplettieren einer ca. 280 m langen Horizontalstrecke in diesem Traeger erfolgreich moeglich ist. Vorliegende Publikation gibt einen kurzen Einblick in die Geschichte des Feldes, die Planung und Realisierung eines laufenden Dampfflutprojektes unter Einbindung von horizontalen Foerderbohrungen und vergleicht deren Performance mit frueheren Projekten. Zusaetzlich wird auf gewonnene Erkenntnisse durch das Abteufen von Horizontalbohrungen im nicht verfestigten Sandstein eingegangen. Abschliessend soll ein Ausblick auf die weitere Feldentwicklung gegeben werden. (orig.)

  15. Real-Time Tropospheric Product Establishment and Accuracy Assessment in China

    Science.gov (United States)

    Chen, M.; Guo, J.; Wu, J.; Song, W.; Zhang, D.

    2018-04-01

    Tropospheric delay has always been an important issue in Global Navigation Satellite System (GNSS) processing. Empirical tropospheric delay models are difficult to simulate complex and volatile atmospheric environments, resulting in poor accuracy of the empirical model and difficulty in meeting precise positioning demand. In recent years, some scholars proposed to establish real-time tropospheric product by using real-time or near-real-time GNSS observations in a small region, and achieved some good results. This paper uses real-time observing data of 210 Chinese national GNSS reference stations to estimate the tropospheric delay, and establishes ZWD grid model in the country wide. In order to analyze the influence of tropospheric grid product on wide-area real-time PPP, this paper compares the method of taking ZWD grid product as a constraint with the model correction method. The results show that the ZWD grid product estimated based on the national reference stations can improve PPP accuracy and convergence speed. The accuracy in the north (N), east (E) and up (U) direction increase by 31.8 %,15.6 % and 38.3 %, respectively. As with the convergence speed, the accuracy of U direction experiences the most improvement.

  16. Household production and consumption over the life cycle: National Time Transfer Accounts in 14 European countries

    Directory of Open Access Journals (Sweden)

    Lili Vargha

    2017-03-01

    Full Text Available Background: While the importance of unpaid household labour is recognised in total economic output, little is known about the demographics of household production and consumption. Objective: Our goal is to give a comprehensive estimation on the value of household production and its consumption by age and gender and analyse nonmarket economic transfers in 14 European countries based on publicly available harmonised data. Methods: We introduce a novel imputation method of harmonised European time use (HETUS data to the European Union Statistics on Income and Living Conditions (EU-SILC in order to assign time spent on home production to consumers in households and estimate time transfers. Moreover, monetary values are attributed to household production activities using data on earnings from the Structure of Earnings Survey (SES. Results: We show that the nonmarket economic life cycle of men differs from that of women. The gender gap in household production is not evenly distributed over the life cycle. Women of working age contribute the most in net terms, while the main beneficiaries of household goods and services are children and to a lesser extent adult men. These patterns are similar across countries, with variations in the gender- and age-specific levels of home production and consumption. Conclusions: In Europe, in the national economy, intergenerational flows are important in sustaining both childhood and old age. In contrast, in the household economy, intergenerational transfers flow mostly towards children. Contribution: We add a new focus to the research on household production: While keeping the gender aspect, we demonstrate the importance of the life cycle component in household production.

  17. A systematic literature review of Releasing Time to Care: The Productive Ward.

    Science.gov (United States)

    Wright, Stella; McSherry, Wilfred

    2013-05-01

    This systematic review provides an overview of the literature published on Releasing Time to Care: The Productive Ward between 2005 and June 2011. Releasing Time to Care: The Productive Ward programme was developed by the NHS Institute for Innovation and Improvement and launched in England in 2007. The programme comprises thirteen modules that aim to increase time for direct patient care, improve the patient and staff experience and make changes to the ward environment to improve efficiency. A systematic literature review. The terms 'Releasing Time to Care' and 'Productive Ward' were applied to key healthcare databases; CINAHL, Medline, Science Direct, ProQuest, Health Business Elite, British Nursing Index, Embase, Health Management Information Consortium and PsychInfo. All papers were read and subject to a quality assessment. The literature search identified 95 unique sources. A lack of research on The Productive Ward programme meant it was necessary to include non-empirical literature. In total, 18 articles met the inclusion criteria. Seven key themes were identified: the patient and staff experience, direct care time, patient safety, financial impact, embedding and sustainability, executive support and leadership, and common barriers and determinants of success. It also highlighted areas that require further exploration such as long-term sustainability of the programme and consistent data measurement between organisations. The review tentatively reports how The Productive Ward programme has been used to transform nursing practice for the benefit of patients and frontline staff, and how it resulted in cost savings. The literature review identified a potential positive results bias in the current literature whereby favourable outcomes were reported. This paper summarises the types of evidence and current literature on The Productive Ward providing a reference for frontline staff implementing the programme. © 2013 Blackwell Publishing Ltd.

  18. MOPITT Near Real-Time Data for LANCE: Automatic Quality Assurance and Comparison to Operational Products

    Science.gov (United States)

    Martinez-Alonso, S.; Deeter, M. N.; Worden, H. M.; Ziskin, D.

    2017-12-01

    Terra-MOPITT (the Measurements of Pollution in the Troposphere instrument) near real-time (NRT) carbon monoxide (CO) products have been selected for distribution through NASA's LANCE (the Land, Atmosphere Near Real-Time Capability for EOS). MOPITT version 7 NRT data will be made publicly available within 3 hours from observation. The retrieval process is the same for both MOPITT NRT and operational products, albeit for the former it is constrained to use ancillary data available within the latency time. Among other requirements, LANCE NRT products must be examined for quality assurance (QA) purposes and relative errors between NRT and operational products must be quantified. Here we present an algorithm for automatic MOPITT NRT QA aimed to identify artifacts and separate those from anomalously high but real CO values. The algorithm is based on a comparison to the statistics of MOPITT operational products. We discuss the algorithm's performance when tested by applying it to three MOPITT datasets: a known (and corrected) artifact in version 4 operational data, anomalously high CO values in operational data during the 2015 Indonesia fires, and actual NRT data. Last, we describe results from a quantitative comparison between MOPITT NRT data and their operational counterparts.

  19. Productivity improvement: Implementation and analysis of clustering technique in manufacturing of timing gearbox cover

    Directory of Open Access Journals (Sweden)

    Satbir Singh

    2016-04-01

    Full Text Available Productivity is an indicator of efficiency with which resources, both human and material, are transformed into useful services and goods. The vital purpose of the prevailing work was to analyze the factors involved in the improvement of productivity in all its types such as material, capital, labor, machine and total productivity at the plant. This was obtained by decreasing the manufacturing cost per component by reducing its cycle time and increasing the monthly production rate. The experimentation revealed that using proposed processes and improved tooling, monthly production rate has increased by 16.2% due to reduced cycle time, the number of defected components i.e. rejection rate has reduced up to 2%. A reduction of 6.78% in manufacturing cost per component was recorded. Tooling cost has reduced by more than 12%. Saving up to 50% in inspection cost has been recorded due to close dimensional tolerances and high surface finish achieved on components. An increase of 4.84% was recorded in total productivity.

  20. Predictive analysis of beer quality by correlating sensory evaluation with higher alcohol and ester production using multivariate statistics methods.

    Science.gov (United States)

    Dong, Jian-Jun; Li, Qing-Liang; Yin, Hua; Zhong, Cheng; Hao, Jun-Guang; Yang, Pan-Fei; Tian, Yu-Hong; Jia, Shi-Ru

    2014-10-15

    Sensory evaluation is regarded as a necessary procedure to ensure a reproducible quality of beer. Meanwhile, high-throughput analytical methods provide a powerful tool to analyse various flavour compounds, such as higher alcohol and ester. In this study, the relationship between flavour compounds and sensory evaluation was established by non-linear models such as partial least squares (PLS), genetic algorithm back-propagation neural network (GA-BP), support vector machine (SVM). It was shown that SVM with a Radial Basis Function (RBF) had a better performance of prediction accuracy for both calibration set (94.3%) and validation set (96.2%) than other models. Relatively lower prediction abilities were observed for GA-BP (52.1%) and PLS (31.7%). In addition, the kernel function of SVM played an essential role of model training when the prediction accuracy of SVM with polynomial kernel function was 32.9%. As a powerful multivariate statistics method, SVM holds great potential to assess beer quality. Copyright © 2014 Elsevier Ltd. All rights reserved.

  1. Pedagogical Change at Times of Change in the Higher Education System: An Exploration of Early Career Mentoring, Co-publication and Teaching & Learning Insights

    Directory of Open Access Journals (Sweden)

    Bill Boyd

    2015-03-01

    Full Text Available Universities are at a time of change. Their social, political and economic conditions are under challenge, while technological change challenges curriculum design and implementation, requiring reconsiderations of teaching and learning practices. In this context, and as part of the conference session on Higher education in 2014: threshold, watershed or business as usual?, I reviewed an approach I have been trialing to supporting early- and mid-career academics to navigate through this changing environment. This paper presents an illustrated essay on a human-scale approach to early- and mid-career mentoring through the establishment of small team-based research and writing projects. The essay provides examples of activities that, on the one hand, assist academics to develop the tools they need to navigate the new and evolving environment of higher education, while on the other hand directly addresses key pedagogical issues and provides new insight into teaching and learning in higher education.

  2. Continuous-Time Classical and Quantum Random Walk on Direct Product of Cayley Graphs

    International Nuclear Information System (INIS)

    Salimi, S.; Jafarizadeh, M. A.

    2009-01-01

    In this paper we define direct product of graphs and give a recipe for obtaining probability of observing particle on vertices in the continuous-time classical and quantum random walk. In the recipe, the probability of observing particle on direct product of graph is obtained by multiplication of probability on the corresponding to sub-graphs, where this method is useful to determining probability of walk on complicated graphs. Using this method, we calculate the probability of continuous-time classical and quantum random walks on many of finite direct product Cayley graphs (complete cycle, complete K n , charter and n-cube). Also, we inquire that the classical state the stationary uniform distribution is reached as t → ∞ but for quantum state is not always satisfied. (general)

  3. Time-explicit methods for joint economical and geological risk mitigation in production optimization

    DEFF Research Database (Denmark)

    Christiansen, Lasse Hjuler; Capolei, Andrea; Jørgensen, John Bagterp

    2016-01-01

    Real-life applications of production optimization face challenges of risks related to unpredictable fluctuations in oil prices and sparse geological data. Consequently, operating companies are reluctant to adopt model-based production optimization into their operations. Conventional production...... of mitigating economical and geological risks. As opposed to conventional strategies that focus on a single long-term objective, TE methods seek to reduce risks and promote returns over the entire reservoir life by optimization of a given ensemble-based geological risk measure over time. By explicit involvement...... of time, economical risks are implicitly addressed by balancing short-term and long-term objectives throughout the reservoir life. Open-loop simulations of a two-phase synthetic reservoir demonstrate that TE methods may significantly improve short-term risk measures such as expected return, standard...

  4. Assessment of MODIS NDVI time series data products for detecting forest defoliation by gypsy moth outbreaks

    Science.gov (United States)

    Joseph P. Spruce; Steven Sader; Robert E. Ryan; James Smoot; Philip Kuper; al. et.

    2011-01-01

    This paper discusses an assessment of Moderate Resolution Imaging Spectroradiometer (MODIS) time-series data products for detecting forest defoliation from European gypsy moth (Lymantria dispar). This paper describes an effort to aid the United States Department of Agriculture (USDA) Forest Service in developing and assessing MODIS-based gypsy moth defoliation...

  5. Covariance of time-ordered products implies local commutativity of fields

    International Nuclear Information System (INIS)

    Greenberg, O.W.

    2006-01-01

    We formulate Lorentz covariance of a quantum field theory in terms of covariance of time-ordered products (or other Green's functions). This formulation of Lorentz covariance implies spacelike local commutativity or anticommutativity of fields, sometimes called microscopic causality or microcausality. With this formulation microcausality does not have to be taken as a separate assumption

  6. The Impact of NPD Strategy, Product Strategy, and NPD Processes on Percieved Cycle Time

    NARCIS (Netherlands)

    Parry, Mark E.; Song, Michael; Song, Michael; de Weerd-Nederhof, Petronella C.; Visscher, Klaasjan

    2009-01-01

    Studies of new product development (NPD) have identified a variety of factors that influence cycle time, but most of these findings are based on case studies of individual firms. The few empirical studies that have attempted to examine the generalizability of these findings have tended to focus on

  7. Torrefaction of agricultural by-products: Effects of temperature and time on energy yields

    Science.gov (United States)

    Agricultural by-products, such as apple, grape, olive, and tomato pomaces as well as almond and walnut shells, were torrefied at different temperatures and times. Torrefaction of biomass involves heating in an inert atmosphere to remove volatile components for improved grindability and increased ene...

  8. Modelling maintenance practice of production plant using the delay-time concept

    NARCIS (Netherlands)

    Christer, A.H.; Wang, Wenbin; Baker, R.D.; Sharp, J.

    1995-01-01

    In this paper we present a study carried out for a copper products manufacturing company, developing and applying the delay-time modelling technique to model and thus optimize preventive maintenance (PM) of the plant. A key machine in the plant is used to illustrate the modelling process and

  9. Organisation of working time: Implications for productivity and working conditions. Overview Report

    NARCIS (Netherlands)

    Goudswaard, A.; Dhondt, S.; Vergeer, R.; Oeij, P.; Leede, J. de; Adrichem, K. van C; Csizmadia, P.; Makó, C.; Illésy, M.; Tóth, A.

    2012-01-01

    Companies in search of improved productivity use a wide range of approaches, from financial incentives and skills upgrading and training to increased autonomy of individuals and teams. Working time flexibility has the added advantage in that it can benefit both workers and employers: it gives

  10. Body size and the timing of egg production in parasitoid wasps.

    NARCIS (Netherlands)

    Ellers, J.; Jervis, M.

    2003-01-01

    In insects several key fitness-related variables are positively correlated with intraspecific variation in body size, but little is known about size-related variation in the timing of egg production within species. Female insects are known to vary in the degree to which they concentrate egg

  11. Quantum and classical strong direct product theorems and optimal time-space tradeoffs

    NARCIS (Netherlands)

    H. Klauck (Hartmut); R. Spalek (Robert); R. M. de Wolf (Ronald)

    2007-01-01

    textabstractA strong direct product theorem says that if we want to compute $k$ independent instances of a function, using less than $k$ times the resources needed for one instance, then our overall success probability will be exponentially small in $k$. We establish such theorems for the

  12. RD networks and regional knowledge production in Europe : Evidence from a space-time model

    NARCIS (Netherlands)

    Wanzenböck, Iris; Piribauer, Philipp

    2018-01-01

    In this study we estimate space-time impacts of the embeddedness in R&D networks on regional knowledge production using a dynamic spatial panel data model with non-linear effects for 229 European NUTS 2 regions in the period 1998–2010. Embeddedness refers to the positioning in networks where nodes

  13. Time characteristics of distortion product otoacoustic emissions recovery function after moderate sound exposure

    DEFF Research Database (Denmark)

    de Toro, Miguel Angel Aranda; Ordoñez, Rodrigo Pizarro; Hammershøi, Dorte

    2006-01-01

    Exposure to sound of moderate level temporarily attenuates the amplitude of distortion product otoacoustic emissions (DPOAEs). These changes are similar to the changes observed in absolute hearing thresholds after similar sound exposures. To be able to assess changes over time across a broad...

  14. Effects of pollination timing and distance on seed production in a dioecious weed Silene latifolia

    Science.gov (United States)

    Anderson, Jay F.; Duddu, Hema S. N.; Shirtliffe, Steven J.; Benaragama, Dilshan; Syrovy, Lena D.; Stanley, Katherine A.; Haile, Teketel A.

    2015-11-01

    Silene latifolia Poir. (white cockle or white campion) is an important invasive weed in North American agriculture. It exhibits dioecy, therefore, both male and female plants are required in order for seed production to occur. However, dioecious species being invasive is not common because of their limitations in pollination and subsequent seed production. The objective of this study is to determine the effect of pollination timing and distance on seed production of Silene latifolia. A series of experiments including pollination exclusion, timing and pollination distance were conducted in 2009 and 2010 at or around Saskatoon, Saskatchewan. For pollination exclusion, exclosures were built around the natural female plants for exclosure, sham-exclosure, and male and female combined treatments. Pollination timing was studied by applying exclosure, non-exclosure, night-exclosure, and day-exclosure treatments to individual female plants. Female plants were transplanted along a linear interval at six different distances from the pollen source to study the effect of pollination distance. S. latifolia was exclusively insect-pollinated and pollination occurred both day and night; however, in one year, pollination occurred mainly at night. Female plants that were in the range of 0-4 m from a compatible pollen source experienced no limitation to pollination. However, when the distance was increased further up to 128 m, pollination levels and subsequent seed production were declined. Moreover, there were differences in seed production between years suggesting that pollination was affected by the environmental conditions during pollination and the crop that white cockle was grown in. These experiments indicate that seed production in S. latifolia is limited by insect-pollination. Although there was pollination limitation for seed production at greater distances from a pollen source, the high fecundity rate (3000-18000 seeds per plant) resulted in a large seed output. Thus, we

  15. Enhanced transfer of organic matter to higher trophic levels caused by ocean acidification and its implications for export production: A mass balance approach.

    Science.gov (United States)

    Boxhammer, Tim; Taucher, Jan; Bach, Lennart T; Achterberg, Eric P; Algueró-Muñiz, María; Bellworthy, Jessica; Czerny, Jan; Esposito, Mario; Haunost, Mathias; Hellemann, Dana; Ludwig, Andrea; Yong, Jaw C; Zark, Maren; Riebesell, Ulf; Anderson, Leif G

    2018-01-01

    Ongoing acidification of the ocean through uptake of anthropogenic CO2 is known to affect marine biota and ecosystems with largely unknown consequences for marine food webs. Changes in food web structure have the potential to alter trophic transfer, partitioning, and biogeochemical cycling of elements in the ocean. Here we investigated the impact of realistic end-of-the-century CO2 concentrations on the development and partitioning of the carbon, nitrogen, phosphorus, and silica pools in a coastal pelagic ecosystem (Gullmar Fjord, Sweden). We covered the entire winter-to-summer plankton succession (100 days) in two sets of five pelagic mesocosms, with one set being CO2 enriched (~760 μatm pCO2) and the other one left at ambient CO2 concentrations. Elemental mass balances were calculated and we highlight important challenges and uncertainties we have faced in the closed mesocosm system. Our key observations under high CO2 were: (1) A significantly amplified transfer of carbon, nitrogen, and phosphorus from primary producers to higher trophic levels, during times of regenerated primary production. (2) A prolonged retention of all three elements in the pelagic food web that significantly reduced nitrogen and phosphorus sedimentation by about 11 and 9%, respectively. (3) A positive trend in carbon fixation (relative to nitrogen) that appeared in the particulate matter pool as well as the downward particle flux. This excess carbon counteracted a potential reduction in carbon sedimentation that could have been expected from patterns of nitrogen and phosphorus fluxes. Our findings highlight the potential for ocean acidification to alter partitioning and cycling of carbon and nutrients in the surface ocean but also show that impacts are temporarily variable and likely depending upon the structure of the plankton food web.

  16. Enhanced transfer of organic matter to higher trophic levels caused by ocean acidification and its implications for export production: A mass balance approach.

    Directory of Open Access Journals (Sweden)

    Tim Boxhammer

    Full Text Available Ongoing acidification of the ocean through uptake of anthropogenic CO2 is known to affect marine biota and ecosystems with largely unknown consequences for marine food webs. Changes in food web structure have the potential to alter trophic transfer, partitioning, and biogeochemical cycling of elements in the ocean. Here we investigated the impact of realistic end-of-the-century CO2 concentrations on the development and partitioning of the carbon, nitrogen, phosphorus, and silica pools in a coastal pelagic ecosystem (Gullmar Fjord, Sweden. We covered the entire winter-to-summer plankton succession (100 days in two sets of five pelagic mesocosms, with one set being CO2 enriched (~760 μatm pCO2 and the other one left at ambient CO2 concentrations. Elemental mass balances were calculated and we highlight important challenges and uncertainties we have faced in the closed mesocosm system. Our key observations under high CO2 were: (1 A significantly amplified transfer of carbon, nitrogen, and phosphorus from primary producers to higher trophic levels, during times of regenerated primary production. (2 A prolonged retention of all three elements in the pelagic food web that significantly reduced nitrogen and phosphorus sedimentation by about 11 and 9%, respectively. (3 A positive trend in carbon fixation (relative to nitrogen that appeared in the particulate matter pool as well as the downward particle flux. This excess carbon counteracted a potential reduction in carbon sedimentation that could have been expected from patterns of nitrogen and phosphorus fluxes. Our findings highlight the potential for ocean acidification to alter partitioning and cycling of carbon and nutrients in the surface ocean but also show that impacts are temporarily variable and likely depending upon the structure of the plankton food web.

  17. Production Cells in Construction: Considering Time, Space and Information Linkages to Seek Broader Implementations

    Directory of Open Access Journals (Sweden)

    Renato Nunes Mariz

    2013-01-01

    Full Text Available The use of production cells in manufacturing has achieved many benefits, motivating researchers to apply them in the construction environment. The aim of this research is to identify time, space, and information linkages in construction’s production cells applications, seeking opportunities for broader implementations. We adopted a literature review approach focusing on cases in the Brazilian construction sector that addressed cell applications. Subsequently, comparative tables of these publications were prepared, analyzing the consideration of time, space, and information linkages, as well as identified results. The article pointed out that there is a gap in publications that address the application of a production cell in almost all construction flows, except the job site flow, reflecting the tendency of most companies of applying lean concepts firstly in physical flows. By analyzing these aspects (group of features that enhance the use of the cell, it was found that “material flow and pull systems” and “operators interaction” were the aspects most often considered, but mostly partially. Few cases reported the use of “flexibility” and “equipment maintenance”. No case reported comprehensive considerations of the three important linkages of time, space, and information. Space was the linkage better considered compared to time and information linkages. Lead time reduction, cost savings and increased productivity were among the greatest benefits reported from the applications of production cells. There is also a positive correlation between the linkages coverage and the number of benefits obtained. Further research is suggested in order to investigate the results of a more comprehensive application considering all linkages.

  18. Room for manoeuvre in time of the workforce in dairy production systems

    Directory of Open Access Journals (Sweden)

    Joel Carneiro dos Santos Filho

    2012-12-01

    Full Text Available The objective of this study was to characterize and to analyze the room for manoeuvre in time in dairy production systems (DPS. Two interviews were conducted in twenty DPS in the Northern region of Paraná, Brazil, with the following objectives: to know the management and practices involving the herd, the land area and the commercialization; and to qualify and evaluate the work organization. In order to build the variables, the repertory grid method was used, and for the typology, the graphic methodology of Bertin adapted to small samples was used. The results showed that the room for manoeuvre in time of the DPS, quantified in hours available per year, varied between the farmers and was related to routine work and seasonal work durations, as well as the autonomy of farmers to perform both works. The routine work was related to the number of cows, but was also explained by the herd management, by the transport equipment for the feed and by the workforce composition. Four types of work organization were identified between sampled DPS, based on room for manoeuvre in time and how they were built. Knowing the room for manoeuvre time and its variables, it is possible to guide the farmers to adjust their dairy production system in order to have more time available for other activities or to develop the dairy production system.

  19. Real time evolution at finite temperatures with operator space matrix product states

    International Nuclear Information System (INIS)

    Pižorn, Iztok; Troyer, Matthias; Eisler, Viktor; Andergassen, Sabine

    2014-01-01

    We propose a method to simulate the real time evolution of one-dimensional quantum many-body systems at finite temperature by expressing both the density matrices and the observables as matrix product states. This allows the calculation of expectation values and correlation functions as scalar products in operator space. The simulations of density matrices in inverse temperature and the local operators in the Heisenberg picture are independent and result in a grid of expectation values for all intermediate temperatures and times. Simulations can be performed using real arithmetics with only polynomial growth of computational resources in inverse temperature and time for integrable systems. The method is illustrated for the XXZ model and the single impurity Anderson model. (paper)

  20. Real time evolution at finite temperatures with operator space matrix product states

    Science.gov (United States)

    Pižorn, Iztok; Eisler, Viktor; Andergassen, Sabine; Troyer, Matthias

    2014-07-01

    We propose a method to simulate the real time evolution of one-dimensional quantum many-body systems at finite temperature by expressing both the density matrices and the observables as matrix product states. This allows the calculation of expectation values and correlation functions as scalar products in operator space. The simulations of density matrices in inverse temperature and the local operators in the Heisenberg picture are independent and result in a grid of expectation values for all intermediate temperatures and times. Simulations can be performed using real arithmetics with only polynomial growth of computational resources in inverse temperature and time for integrable systems. The method is illustrated for the XXZ model and the single impurity Anderson model.

  1. Schwinger pair production in space- and time-dependent electric fields: Relating the Wigner formalism to quantum kinetic theory

    International Nuclear Information System (INIS)

    Hebenstreit, F.; Alkofer, R.; Gies, H.

    2010-01-01

    The nonperturbative electron-positron pair production (Schwinger effect) is considered for space- and time-dependent electric fields E-vector(x-vector,t). Based on the Dirac-Heisenberg-Wigner formalism, we derive a system of partial differential equations of infinite order for the 16 irreducible components of the Wigner function. In the limit of spatially homogeneous fields the Vlasov equation of quantum kinetic theory is rediscovered. It is shown that the quantum kinetic formalism can be exactly solved in the case of a constant electric field E(t)=E 0 and the Sauter-type electric field E(t)=E 0 sech 2 (t/τ). These analytic solutions translate into corresponding expressions within the Dirac-Heisenberg-Wigner formalism and allow to discuss the effect of higher derivatives. We observe that spatial field variations typically exert a strong influence on the components of the Wigner function for large momenta or for late times.

  2. ANALYZING THE POSTPONEMENT OF TIME PRODUCTION SYSTEMS IN MAKE-TO-STOCK AND SEASONAL DEMAND

    Directory of Open Access Journals (Sweden)

    Paulo Cesar Chagas Rodrigues

    2011-12-01

    Full Text Available The supply chain management, postponement and demand management functions are of strategic importance to the economic success of organizations because they influence the production process, when viewed in isolation and empirically may hinder understanding of their behavior. The aim of this paper is to analyze the influence of the postponement in an enterprise production system with make-to-stock and with seasonal demand. The research method used was a case study, the instruments of data collection were semi-structured interviews, documentary analysis and site visits. This research is restricted to analysis of the influence that different levels of delay and the company's position in the supply chain have on the practice of demand management in the productive segment graphic, product spiral notebook and also in relation to geographical focus (region of the state São Paulo, in which it will seek to interview the managers and directors. As a way to support the research on the analysis of case study and the final considerations will be discussed the following issues: supply chain management, postponement, demand management and production system make-to-stock. The demand management can be understood as a practice that allows you to manage and coordinate the supply chain in reverse, i.e. the consumer to the supplier, in which consumers trigger actions for the supply of products can make the process more efficient. The purpose of managing the supply chain is able to allow the addition of value, exceeding the expectations of consumers, it is necessary to develop a relationship with suppliers and customers win-win. The postponement strategy must fit the characteristics of the turbulent environment within the markets along with demands that require variety of customized products and services and reasonable costs, aiming to support decision making. The postponement of time can be a way to soften the increase in inventory of finished product in the company

  3. Space-time dependence between energy sources and climate related energy production

    Science.gov (United States)

    Engeland, Kolbjorn; Borga, Marco; Creutin, Jean-Dominique; Ramos, Maria-Helena; Tøfte, Lena; Warland, Geir

    2014-05-01

    The European Renewable Energy Directive adopted in 2009 focuses on achieving a 20% share of renewable energy in the EU overall energy mix by 2020. A major part of renewable energy production is related to climate, called "climate related energy" (CRE) production. CRE production systems (wind, solar, and hydropower) are characterized by a large degree of intermittency and variability on both short and long time scales due to the natural variability of climate variables. The main strategies to handle the variability of CRE production include energy-storage, -transport, -diversity and -information (smart grids). The three first strategies aim to smooth out the intermittency and variability of CRE production in time and space whereas the last strategy aims to provide a more optimal interaction between energy production and demand, i.e. to smooth out the residual load (the difference between demand and production). In order to increase the CRE share in the electricity system, it is essential to understand the space-time co-variability between the weather variables and CRE production under both current and future climates. This study presents a review of the literature that searches to tackle these problems. It reveals that the majority of studies deals with either a single CRE source or with the combination of two CREs, mostly wind and solar. This may be due to the fact that the most advanced countries in terms of wind equipment have also very little hydropower potential (Denmark, Ireland or UK, for instance). Hydropower is characterized by both a large storage capacity and flexibility in electricity production, and has therefore a large potential for both balancing and storing energy from wind- and solar-power. Several studies look at how to better connect regions with large share of hydropower (e.g., Scandinavia and the Alps) to regions with high shares of wind- and solar-power (e.g., green battery North-Sea net). Considering time scales, various studies consider wind

  4. Use of Real Time Satellite Infrared and Ocean Color to Produce Ocean Products

    Science.gov (United States)

    Roffer, M. A.; Muller-Karger, F. E.; Westhaver, D.; Gawlikowski, G.; Upton, M.; Hall, C.

    2014-12-01

    Real-time data products derived from infrared and ocean color satellites are useful for several types of users around the world. Highly relevant applications include recreational and commercial fisheries, commercial towing vessel and other maritime and navigation operations, and other scientific and applied marine research. Uses of the data include developing sampling strategies for research programs, tracking of water masses and ocean fronts, optimizing ship routes, evaluating water quality conditions (coastal, estuarine, oceanic), and developing fisheries and essential fish habitat indices. Important considerations for users are data access and delivery mechanisms, and data formats. At this time, the data are being generated in formats increasingly available on mobile computing platforms, and are delivered through popular interfaces including social media (Facebook, Linkedin, Twitter and others), Google Earth and other online Geographical Information Systems, or are simply distributed via subscription by email. We review 30 years of applications and describe how we develop customized products and delivery mechanisms working directly with users. We review benefits and issues of access to government databases (NOAA, NASA, ESA), standard data products, and the conversion to tailored products for our users. We discuss advantages of different product formats and of the platforms used to display and to manipulate the data.

  5. Role of Weed Emergence Time for the Relative Seed Production in Maize

    Directory of Open Access Journals (Sweden)

    Stefano Benvenuti

    2007-03-01

    Full Text Available Trials were carried out in 2000 and 2001 to investigate the effect of weed emergence time on weed seed production in a maize field. Datura stramonium L., Solanum nigrum L. and Abutilon theophrasti Medicus were selected for their importance as summer weeds. Emergence time was found to be crucial since delay would involve an unfavourable light environment determined by crop canopy elongation and resulting shade production. Only the early emergence of D. stramonium and A. theophrasti showed the capacity to exposing their leaves over the crop canopy. Generally the weed seed production under shade conditions decreased for the reduction of the fruit per plant since the number of seed per plant showed only a light reduction. However, while D. stramonium and A. theophrasti compete with the crop by increasing height, Solanum nigrum tends to adjust to shade without excessive reduction in number of seeds produced. Thus in D. stramonium and A. theophrasti late emergence reduced seed production to only 15%, while S. nigrum maintained 25% of the seed production level generally observed with greater light exposure. This environmental adaptation was confirmed by the less marked decrease in S. nigrum harvest index. Agroecological involvements are discussed.

  6. Molecular quantification of lactic acid bacteria in fermented milk products using real-time quantitative PCR.

    Science.gov (United States)

    Furet, Jean-Pierre; Quénée, Pascal; Tailliez, Patrick

    2004-12-15

    Real-time quantitative PCR assays were developed for the absolute quantification of lactic acid bacteria (LAB) (Streptococcus thermophilus, Lactobacillus delbrueckii, L. casei, L. paracasei, L. rhamnosus, L. acidophilus and L. johnsonii) in fermented milk products. The results of molecular quantification and classic bacterial enumeration did not differ significantly with respect to S. thermophilus and the species of the L. casei group which were detected in the six commercial fermented products tested, thus showing that DNA extraction was efficient and that genomic DNA solutions were free of PCR inhibitors. For L. delbrueckii, the results of bacterial enumeration were generally lower by a factor 10 to 100 than those of PCR quantification, suggesting a loss of viability during storage of the dairy products at 1-8 degrees C for most of the strains in this species. Real-time quantitative assays enabled identification of the species of lactic acid bacterial strains initially present in commercial fermented milk products and their accurate quantification with a detection threshold of 10(3) cells per ml of product.

  7. Secondary analysis of a marketing research database reveals patterns in dairy product purchases over time.

    Science.gov (United States)

    Van Wave, Timothy W; Decker, Michael

    2003-04-01

    Development of a method using marketing research data to assess food purchase behavior and consequent nutrient availability for purposes of nutrition surveillance, evaluation of intervention effects, and epidemiologic studies of diet-health relationships. Data collected on household food purchases accrued over a 13-week period were selected by using Universal Product Code numbers and household characteristics from a marketing research database. Universal Product Code numbers for 39,408 dairy product purchases were linked to a standard reference for food composition to estimate the nutrient content of foods purchased over time. Two thousand one hundred sixty-one households located in Victoria, Texas, and surrounding communities who were active members of a frequent shopper program. Demographic characteristics of sample households and the nutrient content of their dairy product purchases were analyzed using frequency distribution, cross tabulation, analysis of variance, and t test procedures. A method for using marketing research data was successfully used to estimate household purchases of specific foods and their nutrient content from a marketing database containing hundreds of thousands of records. Distribution of dairy product purchases and their concomitant nutrients between Hispanic and non-Hispanic households were significant (P<.01, P<.001, respectively) and sustained over time. Purchase records from large, nationally representative panels of shoppers, such as those maintained by major market research companies, might be used to accomplish detailed longitudinal epidemiologic studies or surveillance of national food- and nutrient-purchasing patterns within and between countries and segments of their respective populations.

  8. Role of Weed Emergence Time for the Relative Seed Production in Maize

    Directory of Open Access Journals (Sweden)

    Stefano Benvenuti

    Full Text Available Trials were carried out in 2000 and 2001 to investigate the effect of weed emergence time on weed seed production in a maize field. Datura stramonium L., Solanum nigrum L. and Abutilon theophrasti Medicus were selected for their importance as summer weeds. Emergence time was found to be crucial since delay would involve an unfavourable light environment determined by crop canopy elongation and resulting shade production. Only the early emergence of D. stramonium and A. theophrasti showed the capacity to exposing their leaves over the crop canopy. Generally the weed seed production under shade conditions decreased for the reduction of the fruit per plant since the number of seed per plant showed only a light reduction. However, while D. stramonium and A. theophrasti compete with the crop by increasing height, Solanum nigrum tends to adjust to shade without excessive reduction in number of seeds produced. Thus in D. stramonium and A. theophrasti late emergence reduced seed production to only 15%, while S. nigrum maintained 25% of the seed production level generally observed with greater light exposure. This environmental adaptation was confirmed by the less marked decrease in S. nigrum harvest index. Agroecological involvements are discussed.

  9. Shelf Life of Food Products: From Open Labeling to Real-Time Measurements.

    Science.gov (United States)

    Corradini, Maria G

    2018-03-25

    The labels currently used on food and beverage products only provide consumers with a rough guide to their expected shelf lives because they assume that a product only experiences a limited range of predefined handling and storage conditions. These static labels do not take into consideration conditions that might shorten a product's shelf life (such as temperature abuse), which can lead to problems associated with food safety and waste. Advances in shelf-life estimation have the potential to improve the safety, reliability, and sustainability of the food supply. Selection of appropriate kinetic models and data-analysis techniques is essential to predict shelf life, to account for variability in environmental conditions, and to allow real-time monitoring. Novel analytical tools to determine safety and quality attributes in situ coupled with modern tracking technologies and appropriate predictive tools have the potential to provide accurate estimations of the remaining shelf life of a food product in real time. This review summarizes the necessary steps to attain a transition from open labeling to real-time shelf-life measurements.

  10. Implementation of Lean System on Erbium Doped Fibre Amplifier Manufacturing Process to Reduce Production Time

    Science.gov (United States)

    Maneechote, T.; Luangpaiboon, P.

    2010-10-01

    A manufacturing process of erbium doped fibre amplifiers is complicated. It needs to meet the customers' requirements under a present economic status that products need to be shipped to customers as soon as possible after purchasing orders. This research aims to study and improve processes and production lines of erbium doped fibre amplifiers using lean manufacturing systems via an application of computer simulation. Three scenarios of lean tooled box systems are selected via the expert system. Firstly, the production schedule based on shipment date is combined with a first in first out control system. The second scenario focuses on a designed flow process plant layout. Finally, the previous flow process plant layout combines with production schedule based on shipment date including the first in first out control systems. The computer simulation with the limited data via an expected value is used to observe the performance of all scenarios. The most preferable resulted lean tooled box systems from a computer simulation are selected to implement in the real process of a production of erbium doped fibre amplifiers. A comparison is carried out to determine the actual performance measures via an analysis of variance of the response or the production time per unit achieved in each scenario. The goodness of an adequacy of the linear statistical model via experimental errors or residuals is also performed to check the normality, constant variance and independence of the residuals. The results show that a hybrid scenario of lean manufacturing system with the first in first out control and flow process plant lay out statistically leads to better performance in terms of the mean and variance of production times.

  11. EFFECT OF AGING TIME TOWARD CRYSTALLINITY OF PRODUCTS IN SYNTHESIS OF MESOPOROUS SILICATES MCM-41

    Directory of Open Access Journals (Sweden)

    Suyanta Suyanta

    2010-12-01

    Full Text Available Researches about the effects of aging time toward crystallinity of products in the synthesis of mesoporous silicates MCM-41 have been done. MCM-41 was synthesized by hydrothermal treatment to the mixture of sodium silicate, sodium hydroxide, cetyltrimetylammoniumbromide (CTMAB and aquadest in the molar ratio of 8Na2SiO3 : CTMAB : NaOH : 400H2O. Hydrothermal treatment was carried out at 110 °C in a teflon-lined stainless steel autoclave heated in the oven, with variation of aging time, i.e.: 4, 8, 12, 16, 24, 36, 48, and 72 h respectively. The solid phase were filtered, then washed with deionised water, and dried in the oven at 100 °C for 2 h. The surfactant CTMAB was removed by calcinations at 550 °C for 10 h with heating rate 2 °C/min. The as-synthesized and calcined powders were characterized by using FTIR spectroscopy and X-ray diffraction method. The relative crystallinity of products was evaluated based on the intensity of d100 peaks. The best product was characterized by using N2 physisorption method in order to determine the specific surface area, mean pore diameter, lattice parameter, and pore walls thickness. It was concluded that the relative crystallinity of the products was sensitively influenced by the aging time. The highest relative crystallinity was achieved when used 36 h of aging time in hydrothermal treatment. In this optimum condition the product has 946.607 m2g-1 of specific surface area, 3.357 nm of mean pore diameter, 4.533 nm of lattice parameter, and 1.176 nm of pore walls thickness.

  12. Portable inference engine: An extended CLIPS for real-time production systems

    Science.gov (United States)

    Le, Thach; Homeier, Peter

    1988-01-01

    The present C-Language Integrated Production System (CLIPS) architecture has not been optimized to deal with the constraints of real-time production systems. Matching in CLIPS is based on the Rete Net algorithm, whose assumption of working memory stability might fail to be satisfied in a system subject to real-time dataflow. Further, the CLIPS forward-chaining control mechanism with a predefined conflict resultion strategy may not effectively focus the system's attention on situation-dependent current priorties, or appropriately address different kinds of knowledge which might appear in a given application. Portable Inference Engine (PIE) is a production system architecture based on CLIPS which attempts to create a more general tool while addressing the problems of real-time expert systems. Features of the PIE design include a modular knowledge base, a modified Rete Net algorithm, a bi-directional control strategy, and multiple user-defined conflict resolution strategies. Problems associated with real-time applications are analyzed and an explanation is given for how the PIE architecture addresses these problems.

  13. A single intranasal immunization with a subunit vaccine formulation induces higher mucosal IgA production than live respiratory syncytial virus

    International Nuclear Information System (INIS)

    Garg, Ravendra; Theaker, Michael; Martinez, Elisa C.; Drunen Littel-van den Hurk, Sylvia van

    2016-01-01

    Respiratory syncytial virus (RSV) causes serious respiratory illness in infants and elderly. RSV infection induces short-lived immunity, which leaves people prone to re-infection. In contrast, the RSV fusion (F) protein formulated with a novel adjuvant (∆F/TriAdj) elicits long term protective immunity. A comparison of RSV-immunized mice to mice vaccinated with a single dose of ∆F/TriAdj showed no difference in IgG1 and IgG2a production; however, local IgA secreting memory B cell development and B cell IgA production were significantly lower in RSV vaccinated mice than in ∆F/TriAdj-immunized mice. This indicates a potential reason as to why long-term immunity is not induced by RSV infection. The comparison also revealed that germinal center lymphocyte populations were higher in ∆F/TriAdj-vaccinated mice. Furthermore, ∆F/TriAdj induced higher gene expression of activation-induced cytidine deaminase (AID), as well as IL-6, IL-21, TGF-β cytokines, which are key players in IgA class switch recombination, ultimately leading to a sustained long-term memory response. - Highlights: •Immune responses to adjuvanted RSV F protein, ∆F/TriAdj, and RSV were compared. •∆F/TriAdj stimulates more local IgA production than RSV. •∆F/TriAdj induces more local IgA secreting memory B cells than RSV. •Germinal center lymphocyte populations are higher in ∆F/TriAdj-vaccinated mice. •∆F/TriAdj induces higher gene expression of AID, IL-6, IL-21, and TGF-β than RSV.

  14. A single intranasal immunization with a subunit vaccine formulation induces higher mucosal IgA production than live respiratory syncytial virus

    Energy Technology Data Exchange (ETDEWEB)

    Garg, Ravendra [VIDO-InterVac, University of Saskatchewan, Saskatoon, SK S7N 5E3 (Canada); Theaker, Michael [Microbiology & Immunology, University of Saskatchewan, Saskatoon, SK S7N 5E3 (Canada); Martinez, Elisa C. [VIDO-InterVac, University of Saskatchewan, Saskatoon, SK S7N 5E3 (Canada); Microbiology & Immunology, University of Saskatchewan, Saskatoon, Canada SK S7N 5E3 (Canada); Drunen Littel-van den Hurk, Sylvia van, E-mail: sylvia.vandenhurk@usask.ca [VIDO-InterVac, University of Saskatchewan, Saskatoon, SK S7N 5E3 (Canada); Microbiology & Immunology, University of Saskatchewan, Saskatoon, SK S7N 5E3 (Canada)

    2016-12-15

    Respiratory syncytial virus (RSV) causes serious respiratory illness in infants and elderly. RSV infection induces short-lived immunity, which leaves people prone to re-infection. In contrast, the RSV fusion (F) protein formulated with a novel adjuvant (∆F/TriAdj) elicits long term protective immunity. A comparison of RSV-immunized mice to mice vaccinated with a single dose of ∆F/TriAdj showed no difference in IgG1 and IgG2a production; however, local IgA secreting memory B cell development and B cell IgA production were significantly lower in RSV vaccinated mice than in ∆F/TriAdj-immunized mice. This indicates a potential reason as to why long-term immunity is not induced by RSV infection. The comparison also revealed that germinal center lymphocyte populations were higher in ∆F/TriAdj-vaccinated mice. Furthermore, ∆F/TriAdj induced higher gene expression of activation-induced cytidine deaminase (AID), as well as IL-6, IL-21, TGF-β cytokines, which are key players in IgA class switch recombination, ultimately leading to a sustained long-term memory response. - Highlights: •Immune responses to adjuvanted RSV F protein, ∆F/TriAdj, and RSV were compared. •∆F/TriAdj stimulates more local IgA production than RSV. •∆F/TriAdj induces more local IgA secreting memory B cells than RSV. •Germinal center lymphocyte populations are higher in ∆F/TriAdj-vaccinated mice. •∆F/TriAdj induces higher gene expression of AID, IL-6, IL-21, and TGF-β than RSV.

  15. Real-time object recognition in multidimensional images based on joined extended structural tensor and higher-order tensor decomposition methods

    Science.gov (United States)

    Cyganek, Boguslaw; Smolka, Bogdan

    2015-02-01

    In this paper a system for real-time recognition of objects in multidimensional video signals is proposed. Object recognition is done by pattern projection into the tensor subspaces obtained from the factorization of the signal tensors representing the input signal. However, instead of taking only the intensity signal the novelty of this paper is first to build the Extended Structural Tensor representation from the intensity signal that conveys information on signal intensities, as well as on higher-order statistics of the input signals. This way the higher-order input pattern tensors are built from the training samples. Then, the tensor subspaces are built based on the Higher-Order Singular Value Decomposition of the prototype pattern tensors. Finally, recognition relies on measurements of the distance of a test pattern projected into the tensor subspaces obtained from the training tensors. Due to high-dimensionality of the input data, tensor based methods require high memory and computational resources. However, recent achievements in the technology of the multi-core microprocessors and graphic cards allows real-time operation of the multidimensional methods as is shown and analyzed in this paper based on real examples of object detection in digital images.

  16. Fusion of product and process data: Batch-mode and real-time streaming

    Energy Technology Data Exchange (ETDEWEB)

    Vincent De Sapio; Spike Leonard

    1999-12-01

    In today's DP product realization enterprise it is imperative to reduce the design-to-fabrication cycle time and cost while improving the quality of DP parts (reducing defects). Much of this challenge resides in the inherent gap between the product and process worlds. The lack of seamless, bi-directional flow of information prevents true concurrency in the product realization world. This report addresses a framework for product-process data fusion to help achieve next generation product realization. A fundamental objective is to create an open environment for multichannel observation of process date, and subsequent mapping of that data onto product geometry. In addition to the sensor-based observation of manufacturing processes, model-based process data provides an important complement to empirically acquired data. Two basic groups of manufacturing models are process physics, and machine kinematics and dynamics. Process physics addresses analytical models that describe the physical phenomena of the process itself. Machine kinematic and dynamic models address the mechanical behavior of the processing equipment. As a secondary objective, an attempt has been made in this report to address part of the model-based realm through the development of an open object-oriented library and toolkit for machine kinematics and dynamics. Ultimately, it is desirable to integrate design definition, with all types of process data; both sensor-based and model-based. Collectively, the goal is to allow all disciplines within the product realization enterprise to have a centralized medium for the fusion of product and process data.

  17. Joint Optimization of Economic Production Quantity and Preventive Maintenance with Considering Multi-Products and Reserve Time

    OpenAIRE

    Liu, Xuejuan; Wang, Binrong

    2017-01-01

    Purpose: We deal with the problem of the joint determination of optimal economic production quantity (EPQ) and optimal preventive maintenance (PM) for a system that can produce multiple products alternately. The objective is to find the optimal number of production cycles and the PM policy simultaneously by minimizing the cost model. Design/methodology/approach: Considering the products go through the system in a sequence and a complete run of all products forms a production cy...

  18. Effect of hydraulic retention time on biohydrogen and volatile fatty acids production during acidogenic digestion of dephenolized olive mill wastewaters

    International Nuclear Information System (INIS)

    Scoma, Alberto; Bertin, Lorenzo; Fava, Fabio

    2013-01-01

    The influence of Hydraulic Retention Time (HRT) on the performances of a recently developed biotechnological anaerobic acidogenic process fed with dephenolized Olive Mill Wastewater (OMW) was investigated. The study was carried out under mesophilic conditions in Packed Bed Biofilm Reactors (PBBRs), filled with ceramic cubes and inoculated with a characterized and acclimated acidogenic microbial consortium. The PBBRs were fed with a HRT of 7, 5, 3 or 1 day, which corresponded to Organic Loading Rates (OLRs) of about 5.5, 7.8, 12.9 and 38.8 g L −1 d −1 , respectively. A significant production of a H 2 -rich biogas was observed when shorter HRTs were applied: in particular, H 2 relative amount and productivity increased from 3% to 32% and from 0.20 to 6.10 dm 3 m −3 h −1 , respectively, by decreasing the HRT from 7 to 1 day. On the contrary, shorter HRTs turned into a lower accumulation of Volatile Fatty Acids (VFAs), whose highest amounts were found with HRTs of 7 and 5 days (about 18.4 and 19.7 g L −1 COD equivalents, respectively). The highest conversion yield of COD into VFAs (36%) was obtained with a HRT of 5 days, when VFAs represented about 78% of the effluent COD. HRT also influenced the composition of the VFA mixture: acetic, propionic and butyric acid were the most prominent VFAs, being their relative amounts higher when PBBRs were operated with shorter HRTs (up to 19, 12 and 42% of the whole mixture, respectively, when HRT was 1 day). -- Highlights: ► HRT affects the acidogenic digestion of dephenolized olive mill wastewater. ► A significant production of bioH 2 can be coupled to that of volatile fatty acids. ► Higher H 2 and lower VFA productions were obtained by shortening the HRT

  19. A cluster merging method for time series microarray with production values.

    Science.gov (United States)

    Chira, Camelia; Sedano, Javier; Camara, Monica; Prieto, Carlos; Villar, Jose R; Corchado, Emilio

    2014-09-01

    A challenging task in time-course microarray data analysis is to cluster genes meaningfully combining the information provided by multiple replicates covering the same key time points. This paper proposes a novel cluster merging method to accomplish this goal obtaining groups with highly correlated genes. The main idea behind the proposed method is to generate a clustering starting from groups created based on individual temporal series (representing different biological replicates measured in the same time points) and merging them by taking into account the frequency by which two genes are assembled together in each clustering. The gene groups at the level of individual time series are generated using several shape-based clustering methods. This study is focused on a real-world time series microarray task with the aim to find co-expressed genes related to the production and growth of a certain bacteria. The shape-based clustering methods used at the level of individual time series rely on identifying similar gene expression patterns over time which, in some models, are further matched to the pattern of production/growth. The proposed cluster merging method is able to produce meaningful gene groups which can be naturally ranked by the level of agreement on the clustering among individual time series. The list of clusters and genes is further sorted based on the information correlation coefficient and new problem-specific relevant measures. Computational experiments and results of the cluster merging method are analyzed from a biological perspective and further compared with the clustering generated based on the mean value of time series and the same shape-based algorithm.

  20. Target life time of laser ion source for low charge state ion production

    Energy Technology Data Exchange (ETDEWEB)

    Kanesue,T.; Tamura, J.; Okamura, M.

    2008-06-23

    Laser ion source (LIS) produces ions by irradiating pulsed high power laser shots onto the solid state target. For the low charge state ion production, laser spot diameter on the target can be over several millimeters using a high power laser such as Nd:YAG laser. In this case, a damage to the target surface is small while there is a visible crater in case of the best focused laser shot for high charge state ion production (laser spot diameter can be several tens of micrometers). So the need of target displacement after each laser shot to use fresh surface to stabilize plasma is not required for low charge state ion production. We tested target lifetime using Nd:YAG laser with 5 Hz repetition rate. Also target temperature and vacuum condition were recorded during experiment. The feasibility of a long time operation was verified.

  1. Investigation of the Time Evolution and Species Production in a 2-Dimensional Packed Bed Reactor

    Science.gov (United States)

    Engeling, Kenneth; Kruszelnicki, Juliusz; Kushner, Mark; Foster, John

    2016-09-01

    Plasma production in microporous media has potential to enable a number of technologies ranging from flameless combustion to environmental hazard mitigation addressing air borne pollutants. Packed bed reactors (PBRs) is one such technology that relies on plasma production in microporous media. The physics of plasma production and transport in such media however remains poorly understood. In order to better understand the plasma propagation and plasma driven chemical reaction within microporous media, absorption spectroscopy and time-resolved imaging diagnostics are being utilized. We report on plasma driven species formation and plasma discharge spatial structure and evolution characteristics found in the 2-dimensional representation of a PBR. Work supported by US DOE Office of Fusion Energy Science and the National Science Foundation.

  2. Exact and Heuristic Solutions to Minimize Total Waiting Time in the Blood Products Distribution Problem

    Directory of Open Access Journals (Sweden)

    Amir Salehipour

    2012-01-01

    Full Text Available This paper presents a novel application of operations research to support decision making in blood distribution management. The rapid and dynamic increasing demand, criticality of the product, storage, handling, and distribution requirements, and the different geographical locations of hospitals and medical centers have made blood distribution a complex and important problem. In this study, a real blood distribution problem containing 24 hospitals was tackled by the authors, and an exact approach was presented. The objective of the problem is to distribute blood and its products among hospitals and medical centers such that the total waiting time of those requiring the product is minimized. Following the exact solution, a hybrid heuristic algorithm is proposed. Computational experiments showed the optimal solutions could be obtained for medium size instances, while for larger instances the proposed hybrid heuristic is very competitive.

  3. Research on the time optimization model algorithm of Customer Collaborative Product Innovation

    Directory of Open Access Journals (Sweden)

    Guodong Yu

    2014-01-01

    Full Text Available Purpose: To improve the efficiency of information sharing among the innovation agents of customer collaborative product innovation and shorten the product design cycle, an improved genetic annealing algorithm of the time optimization was presented. Design/methodology/approach: Based on the analysis of the objective relationship between the design tasks, the paper takes job shop problems for machining model and proposes the improved genetic algorithm to solve the problems, which is based on the niche technology and thus a better product collaborative innovation design time schedule is got to improve the efficiency. Finally, through the collaborative innovation design of a certain type of mobile phone, the proposed model and method were verified to be correct and effective. Findings and Originality/value: An algorithm with obvious advantages in terms of searching capability and optimization efficiency of customer collaborative product innovation was proposed. According to the defects of the traditional genetic annealing algorithm, the niche genetic annealing algorithm was presented. Firstly, it avoided the effective gene deletions at the early search stage and guaranteed the diversity of solution; Secondly, adaptive double point crossover and swap mutation strategy were introduced to overcome the defects of long solving process and easily converging local minimum value due to the fixed crossover and mutation probability; Thirdly, elite reserved strategy was imported that optimal solution missing was avoided effectively and evolution speed was accelerated. Originality/value: Firstly, the improved genetic simulated annealing algorithm overcomes some defects such as effective gene easily lost in early search. It is helpful to shorten the calculation process and improve the accuracy of the convergence value. Moreover, it speeds up the evolution and ensures the reliability of the optimal solution. Meanwhile, it has obvious advantages in efficiency of

  4. Happy, healthy, and productive: the role of detachment from work during nonwork time.

    Science.gov (United States)

    Fritz, Charlotte; Yankelevich, Maya; Zarubin, Anna; Barger, Patricia

    2010-09-01

    Mentally distancing oneself from work during nonwork time can help restore resources lost because of work demands. In this study, we examined possible outcomes of such psychological detachment from work, specifically well-being and job performance. Although employees may need to mentally detach from work to restore their well-being, high levels of detachment may require a longer time to get back into "working mode," which may be negatively associated with job performance. Our results indicate that higher levels of self-reported detachment were associated with higher levels of significant other-reported life satisfaction as well as lower levels of emotional exhaustion. In addition, we found curvilinear relationships between psychological detachment and coworker reported job performance (task performance and proactive behavior). Thus, although high psychological detachment may enhance employee well-being, it seems that medium levels of detachment are most beneficial for job performance. Copyright 2010 APA, all rights reserved

  5. Influence of capacity- and time-constrained intermediate storage in two-stage food production systems

    DEFF Research Database (Denmark)

    Akkerman, Renzo; van Donk, Dirk Pieter; Gaalman, Gerard

    2007-01-01

    In food processing, two-stage production systems with a batch processor in the first stage and packaging lines in the second stage are common and mostly separated by capacity- and time-constrained intermediate storage. This combination of constraints is common in practice, but the literature hardly...... of systems like this. Contrary to the common sense in operations management, the LPT rule is able to maximize the total production volume per day. Furthermore, we show that adding one tank has considerable effects. Finally, we conclude that the optimal setup frequency for batches in the first stage...... pays any attention to this. In this paper, we show how various capacity and time constraints influence the performance of a specific two-stage system. We study the effects of several basic scheduling and sequencing rules in the presence of these constraints in order to learn the characteristics...

  6. Workload assessment on foundry SME to enhance productivity using full time equivalent

    Directory of Open Access Journals (Sweden)

    Sari Amarria Dila

    2018-01-01

    Full Text Available Aluminium SME aims to increase the production amount by producing wok as much as 300 Units. The problem is workload analysis of operator on the wok production line in the wok foundry SME as well as the production cycle-making cycle time and analyze the workload received by the operator when producing 300 woks using the full time equivalent (FTE method. This study aims to measure the workload of each division worker in the production process with a total of 13 workers observed. This study provides a work division recommendation based on the workload that has been carefully examined. This research involves percentage of workload effectiveness and the wages of workers. In lathe division have overload workload. While the printing division, melting inspection division, packaging and transportation division including normal workload category and the percentage of good work effectiveness. The result provides recommendations for the addition of 2 workers in each division that includes the category of overload of the lathe division with the number of initial workers as many as 13 workers to 15 workers. In the last stage perform a simulation by comparing the system of prefix work and proposal. The simulation results obtained with the initial work system to get an average of 223 woks / day. Meanwhile, for the proposed work system to get an average output of 291 woks.

  7. Delay times between harvesting or collection of food products and consumption for use in radiological assessments

    International Nuclear Information System (INIS)

    Jones, A L; Sherwood, J C

    2009-01-01

    From a radiological protection point of view, the inclusion of delay times when carrying out assessments of dose from consumption of foods should be considered. A review of delay times has been carried out to update a report published in 1983, to take account of changes and modernisations in industrial food processes, together with changes in diet and popularity of different foods in the United Kingdom. The new review considered more foods and data for existing foods have been reconsidered to check whether manufacturing processes or procedures have changed the shelf-life of any products. For some foods there have been changes made to the recommended delay times because of changes in manufacture or handling of the fresh foodstuff. A discussion is also included on the appropriate use of delay times in dose assessments.

  8. Organisation of working time: Implications for productivity and working conditions. Overview Report

    OpenAIRE

    Goudswaard, A.; Dhondt, S.; Vergeer, R.; Oeij, P.; Leede, J. de; Adrichem, K. van C; Csizmadia, P.; Makó, C.; Illésy, M.; Tóth, A.

    2012-01-01

    Companies in search of improved productivity use a wide range of approaches, from financial incentives and skills upgrading and training to increased autonomy of individuals and teams. Working time flexibility has the added advantage in that it can benefit both workers and employers: it gives workers more control over their work–life balance and allows companies to adjust more easily to changing economic circumstances. Eurofound research studied five companies in manufacturing and retail in B...

  9. Relating lab to life: Decrements in attention over time predict math productivity among children with ADHD.

    Science.gov (United States)

    Fosco, Whitney D; Hawk, Larry W

    2017-02-01

    A child's ability to sustain attention over time (AOT) is critical in attention-deficit/hyperactivity disorder (ADHD), yet no prior work has examined the extent to which a child's decrement in AOT on laboratory tasks relates to clinically-relevant behavior. The goal of this study is to provide initial evidence for the criterion validity of laboratory assessments of AOT. A total of 20 children with ADHD (7-12 years of age) who were enrolled in a summer treatment program completed two lab attention tasks (a continuous performance task and a self-paced choice discrimination task) and math seatwork. Analyses focused on relations between attention task parameters and math productivity. Individual differences in overall attention (OA) measures (averaged across time) accounted for 23% of the variance in math productivity, supporting the criterion validity of lab measures of attention. The criterion validity was enhanced by consideration of changes in AOT. Performance on all laboratory attention measures deteriorated as time-on-task increased, and individual differences in the decrement in AOT accounted for 40% of the variance in math productivity. The only variable to uniquely predict math productivity was from the self-paced choice discrimination task. This study suggests that attention tasks in the lab do predict a clinically-relevant target behavior in children with ADHD, supporting their use as a means to study attention processes in a controlled environment. Furthermore, this prediction is improved when attention is examined as a function of time-on-task and when the attentional demands are consistent between lab and life contexts.

  10. Monitoring Volatile Organic Compounds (VOCs) in real-time on oil and natural gas production sites

    Science.gov (United States)

    Lupardus, R.; Franklin, S. B.

    2017-12-01

    Oil and Natural Gas (O&NG) development, production, infrastructure, and associated processing activities can be a substantial source of air pollution, yet relevant data and real-time quantification methods are lacking. In the current study, O&NG fugitive emissions of Volatile Organic Compounds (VOCs) were quantified in real-time and used to determine the spatial and temporal windows of exposure for proximate flora and fauna. Eleven O&NG sites on the Pawnee National Grassland in Northeastern Colorado were randomly selected and grouped according to production along with 13 control sites from three geographical locations. At each site, samples were collected 25 m from the wellhead in NE, SE, and W directions. In each direction, two samples were collected with a Gasmet DX4040 gas analyzer every hour from 8:00 am to 2:00 pm (6 hours total), July to October, 2016 (N=864). VOC concentrations generally increased during the 6 hr. day with the exception of N2O and were predominately the result of O&NG production and not vehicle exhaust. Thirteen of 24 VOCs had significantly different levels between production groups, frequently above reference standards and at biologically relevant levels for flora and fauna. The most biologically relevant VOCs, found at concentrations exceeding time weighted average permissible exposure limits (TWA PELs), were benzene and acrolein. Generalized Estimating Equations (GEEs) measured the relative quality of statistical models predicting benzene concentrations on sites. The data not only confirms that O&NG emissions are impacting the region, but also that this influence is present at all sites, including controls. Increased real-time VOC monitoring on O&NG sites is required to identify and contain fugitive emissions and to protect human and environmental health.

  11. Steps of Supercritical Fluid Extraction of Natural Products and Their Characteristic Times

    OpenAIRE

    Sovová, H. (Helena)

    2012-01-01

    Kinetics of supercritical fluid extraction (SFE) from plants is variable due to different micro-structure of plants and their parts, different properties of extracted substances and solvents, and different flow patterns in the extractor. Variety of published mathematical models for SFE of natural products corresponds to this diversification. This study presents simplified equations of extraction curves in terms of characteristic times of four single extraction steps: internal diffusion, exter...

  12. An integrated production inventory model of deteriorating items subject to random machine breakdown with a stochastic repair time

    Directory of Open Access Journals (Sweden)

    Huynh Trung Luong

    2016-11-01

    Full Text Available In a continuous manufacturing environment where production and consumption occur simultaneously, one of the biggest challenges is the efficient management of production and inventory system. In order to manage the integrated production inventory system economically it is necessary to identify the optimal production time and the optimal production reorder point that either maximize the profit or minimize the cost. In addition, during production the process has to go through some natural phenomena like random breakdown of machine, deterioration of product over time, uncertainty in repair time that eventually create the possibility of shortage. In this situation, efficient management of inventory & production is crucial. This paper addresses the situation where a perishable (deteriorated product is manufactured and consumed simultaneously, the demand of this product is stable over the time, machine that produce the product also face random failure and the time to repair this machine is also uncertain. In order to describe this scenario more appropriately, the continuously reviewed Economic Production Quantity (EPQ model is considered in this research work. The main goal is to identify the optimal production uptime and the production reorder point that ultimately minimize the expected value of total cost consisting of machine setup, deterioration, inventory holding, shortage and corrective maintenance cost.

  13. Time-dependent radiolytic product concentrations in the water flow of a spinning wheel target

    International Nuclear Information System (INIS)

    Burns, W.G.; Goodall, J.A.B.

    1989-01-01

    Using the Harwell Facsimile computer simulation package, values of water radiolytic product concentrations, for both transient radicals and stable molecules were calculated for a single revolution of the cooling water at 75 0 C in a spallation neutron source target wheel irradiated with 1000 MeV protons and consequential secondary radiation. The radiation was pulsed except for part of the γ radiation, which was continuous. The stable product concentrations at first rose and eventually came to steady values before the end of the revolution. Comparison with results for steady radiation suggested that with the mixed radiation molecular products from the more densely ionizing radiation were largely destroyed by the radicals from the more lightly ionizing radiation. The distribution of the dose rate in time and space also tended to give a lower extent of radiolysis than calculated for uniform irradiation at the arithmetic mean dose rate. The effect of a second revolution on the diluted products showed a smaller increase in product concentrations than for the first revolution. The Authors consider that the extent of radiolysis should be manageable. (author)

  14. Influence of water activity, temperature and time on mycotoxins production on barley rootlets.

    Science.gov (United States)

    Ribeiro, J M M; Cavaglieri, L R; Fraga, M E; Direito, G M; Dalcero, A M; Rosa, C A R

    2006-02-01

    The objective of this study was to determine the ochratoxin (OT) and aflatoxin (AF) production by three strains of Aspergillus spp. under different water activities, temperature and incubation time on barley rootlets (BR). Aspergillus ochraceus and Aspergillus flavus were able to produce mycotoxins on BR. Aspergillus ochraceus produced ochratoxin A (OTA) at 0.80 water activity (a(w)), at 25 and 30 degrees C as optimal environmental conditions. The OTA production varies at different incubation days depending on a(w). Aflatoxin B(1) (AFB1) accumulation was obtained at 25 degrees C, at 0.80 and 0.95 a(w), after 14 and 21 incubation days respectively. Temperature was a critical factor influencing OTA and AFB(1) production. This study demonstrates that BR support OTA and AFB(1) production at relatively low water activity (0.80 a(w)) and high temperatures (25-30 degrees C). The study of ecophysiological parameters and their interactions would determine the prevailing environmental factors, which enhance the mycotoxin production on BR used as animal feed.

  15. A Time Series Analysis of Global Soil Moisture Data Products for Water Cycle Studies

    Science.gov (United States)

    Zhan, X.; Yin, J.; Liu, J.; Fang, L.; Hain, C.; Ferraro, R. R.; Weng, F.

    2017-12-01

    Water is essential for sustaining life on our planet Earth and water cycle is one of the most important processes of out weather and climate system. As one of the major components of the water cycle, soil moisture impacts significantly the other water cycle components (e.g. evapotranspiration, runoff, etc) and the carbon cycle (e.g. plant/crop photosynthesis and respiration). Understanding of soil moisture status and dynamics is crucial for monitoring and predicting the weather, climate, hydrology and ecological processes. Satellite remote sensing has been used for soil moisture observation since the launch of the Scanning Multi-channel Microwave Radiometer (SMMR) on NASA's Nimbus-7 satellite in 1978. Many satellite soil moisture data products have been made available to the science communities and general public. The soil moisture operational product system (SMOPS) of NOAA NESDIS has been operationally providing global soil moisture data products from each of the currently available microwave satellite sensors and their blends. This presentation will provide an update of SMOPS products. The time series of each of these soil moisture data products are analyzed against other data products, such as precipitation and evapotranspiration from other independent data sources such as the North America Land Data Assimilation System (NLDAS). Temporal characteristics of these water cycle components are explored against some historical events, such as the 2010 Russian, 2010 China and 2012 United States droughts, 2015 South Carolina floods, etc. Finally whether a merged global soil moisture data product can be used as a climate data record is evaluated based on the above analyses.

  16. Cycle Time Optimization of Chamomile Package 120 MI Product at Blow Molding Process

    Directory of Open Access Journals (Sweden)

    Yuni Hermawan

    2012-11-01

    Full Text Available Chamomile is a package which is applied for cosmetic. In industry this package is being processed by blow molding. Thereare many parameters that influence cycle time during production; in this project only three of them were varied, i.e. blowingpressure, blowing time and stopping time. Each parameter is determined three chosen level. Middle level is taken fromstandard setting of machining which is being used by industry. Top and bottom level is randomized. Three stopping time are0.1, 0.55, and 1.0 second. Blowing time are 10.5, 11.5 and 12.5 second. Where as, blowing pressures is 4, 5 and 6 bar.Combination of among levels is based on Box Behnken design. Those three parameters are called variable process. In theother hand, variable responses are cycle time and net weight. Each combination is replicated 5 times and then averaged. Thedata then is processed by using Minitab version 14th. Square regression of the model for cycle time is ?CT = 21,1300 - 0,0912X1 + 0,2000 X2 + 0,6313 X3 + 0,6100 X12 + 0,6975 X22 – 0,1000 X1 X2 – 0,1725 X1 X3 + 0,1100 X2 X3 and Net = 19,2933 –0,0088 X1 + 0,0175 X2 + 0,0712 X3 + 0,0133 X 21 + 0.0158 X22- 0.0217 X 23 + 0.0125 X1X2 - 0,0150 X1 X3 for product netweight. Where X1 is blowing pressure, X2 is blowing time and X3 is stopping time.The model developed then tested by lack offit testing, variance by ANOVA and R square. Second stage of model testing is residual test. Three tests are carry out, i.e.identically test and independency test and normality. Optimization of both values, cycle time and net weight, are searched byResponse Surface Method. By the method it is found that the optimum condition of cycle time is 20.5 seconds and net weightis 19.19 grams. The optimum condition is achieved when stopping is 0.1 second, blowing time 11.35 second and blowingpressure 5.1 bars.

  17. Productivity

    DEFF Research Database (Denmark)

    Spring, Martin; Johnes, Geraint; Hald, Kim Sundtoft

    Productivity is increasingly critical for developed economies. It has always been important: as Paul Krugman puts it, “Productivity isn’t everything, but in the long run it is almost everything. A country’s ability to improve its standard of living over time depends almost entirely on its ability...... to raise its output per worker”(Krugman, 1994). Analyses of productivity have, by and large, been the preserve of economists. Operations Management (OM) is rooted in a similar concern for the efficient use of scarce resources; Management Accounting (MA) is concerned with the institutionalised measurement...... and management of productivity. Yet the three perspectives are rarely connected. This paper is a sketch of a literature review seeking to identify, contrast and reconcile these three perspectives. In so doing, it aims to strengthen the connections between policy and managerial analyses of productivity....

  18. Updating Landsat time series of surface-reflectance composites and forest change products with new observations

    Science.gov (United States)

    Hermosilla, Txomin; Wulder, Michael A.; White, Joanne C.; Coops, Nicholas C.; Hobart, Geordie W.

    2017-12-01

    The use of time series satellite data allows for the temporally dense, systematic, transparent, and synoptic capture of land dynamics over time. Subsequent to the opening of the Landsat archive, several time series approaches for characterizing landscape change have been developed, often representing a particular analytical time window. The information richness and widespread utility of these time series data have created a need to maintain the currency of time series information via the addition of new data, as it becomes available. When an existing time series is temporally extended, it is critical that previously generated change information remains consistent, thereby not altering reported change statistics or science outcomes based on that change information. In this research, we investigate the impacts and implications of adding additional years to an existing 29-year annual Landsat time series for forest change. To do so, we undertook a spatially explicit comparison of the 29 overlapping years of a time series representing 1984-2012, with a time series representing 1984-2016. Surface reflectance values, and presence, year, and type of change were compared. We found that the addition of years to extend the time series had minimal effect on the annual surface reflectance composites, with slight band-specific differences (r ≥ 0.1) in the final years of the original time series being updated. The area of stand replacing disturbances and determination of change year are virtually unchanged for the overlapping period between the two time-series products. Over the overlapping temporal period (1984-2012), the total area of change differs by 0.53%, equating to an annual difference in change area of 0.019%. Overall, the spatial and temporal agreement of the changes detected by both time series was 96%. Further, our findings suggest that the entire pre-existing historic time series does not need to be re-processed during the update process. Critically, given the time

  19. Global, real-time ionosphere specification for end-user communication and navigation products

    Science.gov (United States)

    Tobiska, W.; Carlson, H. C.; Schunk, R. W.; Thompson, D. C.; Sojka, J. J.; Scherliess, L.; Zhu, L.; Gardner, L. C.

    2010-12-01

    Space weather’s effects upon the near-Earth environment are due to dynamic changes in the energy transfer processes from the Sun’s photons, particles, and fields. Of the space environment domains that are affected by space weather, the ionosphere is the key region that affects communication and navigation systems. The Utah State University (USU) Space Weather Center (SWC) is a developer and producer of commercial space weather applications. A key system-level component for providing timely information about the effects of space weather is the Global Assimilation of Ionospheric Measurements (GAIM) system. GAIM, operated by SWC, improves real-time communication and navigation systems by continuously ingesting up to 10,000 slant TEC measurements every 15-minutes from approximately 500 stations. Using a Kalman filter, the background output from the physics-based Ionosphere Forecast Model (IFM) is adjusted to more accurately represent the actual ionosphere. An improved ionosphere leads to more useful derivative products. For example, SWC runs operational code, using GAIM, to calculate and report the global radio high frequency (HF) signal strengths for 24 world cities. This product is updated every 15 minutes at http://spaceweather.usu.edu and used by amateur radio operators. SWC also developed and provides through Apple iTunes the widely used real-time space weather iPhone app called SpaceWx for public space weather education. SpaceWx displays the real-time solar, heliosphere, magnetosphere, thermosphere, and ionosphere drivers to changes in the total electron content, for example. This smart phone app is tip of the “iceberg” of automated systems that provide space weather data; it permits instant understanding of the environment surrounding Earth as it dynamically changes. SpaceWx depends upon a distributed network that connects satellite and ground-based data streams with algorithms to quickly process the measurements into geophysical data, incorporate those

  20. LAI, FAPAR and FCOVER products derived from AVHRR long time series: principles and evaluation

    Science.gov (United States)

    Verger, A.; Baret, F.; Weiss, M.; Lacaze, R.; Makhmara, H.; Pacholczyk, P.; Smets, B.; Kandasamy, S.; Vermote, E.

    2012-04-01

    Continuous and long term global monitoring of the terrestrial biosphere has draught an intense interest in the recent years in the context of climate and global change. Developing methodologies for generating historical data records from data collected with different satellite sensors over the past three decades by taking benefits from the improvements identified in the processing of the new generation sensors is a new central issue in remote sensing community. In this context, the Bio-geophysical Parameters (BioPar) service within Geoland2 project (http://www.geoland2.eu) aims at developing pre-operational infrastructures for providing global land products both in near real time and off-line mode with long time series. In this contribution, we describe the principles of the GEOLAND algorithm for generating long term datasets of three key biophysical variables, leaf area index (LAI), Fraction of Absorbed Photosynthetic Active Radiation (FAPAR) and cover fraction (FCOVER), that play a key role in several processes, including photosynthesis, respiration and transpiration. LAI, FAPAR and FCOVER are produced globally from AVHRR Long Term Data Record (LTDR) for the 1981-2000 period at 0.05° spatial resolution and 10 days temporal sampling frequency. The proposed algorithm aims to ensure robustness of the derived long time series and consistency with the ones developed in the recent years, and particularly with GEOLAND products derived from VEGETATION sensor. The approach is based on the capacity of neural networks to learn a particular biophysical product (GEOLAND) from reflectances from another sensor (AVHRR normalized reflectances in the red and near infrared bands). Outliers due to possible cloud contamination or residual atmospheric correction are iteratively eliminated. Prior information based on the climatology is used to get more robust estimates. A specific gap filing and smoothing procedure was applied to generate continuous and smooth time series of decadal

  1. Characteristics of liquid product from the pyrolysis of waste plastic mixture at low and high temperatures: influence of lapse time of reaction.

    Science.gov (United States)

    Lee, Kyong-Hwan; Shin, Dae-Hyun

    2007-01-01

    Pyrolysis of a waste plastic mixture (high-density polyethylene: low-density polyethylene: polypropylene: polystyrene = 3:2:3:1) into a liquid product was carried out in a stirred semi-batch reactor at low (350 degrees C) and high (400 degrees C) temperatures. The effect of lapse time of reaction in the reactor and also degradation temperature on the characteristics of the liquid product from pyrolysis of the mixture was investigated. Liquid products were described by cumulative amount distribution, paraffin, olefin, naphthene and aromatic (PONA) distribution and molecular weight distribution. Their characteristic was quite differed with a lapse time of reaction and also at a low and high degradation temperatures, because of the different physicochemical properties of the plastic types in the mixture. With increase of lapse time of reaction, the order for the main products in PONA components obtained at 350 degrees C was firstly aromatic products and then olefin products, while at 400 degrees C the order was firstly aromatic products, then olefin products and finally paraffin products. The experiments also showed from the molecular weight distribution of liquid PONA components that the paraffin and olefin products had a wide distribution by mainly random scission of polymer, but in the case of olefin products were produced by an end-chain scission mechanism as well as random scission mechanism, as evidenced by much more light olefin products. This phenomenon was evident at a higher degradation temperature. Also, both the light olefin and naphthene products with a molecular weight of around 120, as a main product, showed a similar trend as a function of lapse time, which had a maximum fraction at 343 min (at 350 degrees C) and 83 min (at 400 degrees C). Among PONA components, the highest concentrations of aromatic products were obtained with a molecular weight of around 100 at the fastest lapse time of reaction, regardless of degradation temperature. It was

  2. Characteristics of liquid product from the pyrolysis of waste plastic mixture at low and high temperatures: Influence of lapse time of reaction

    International Nuclear Information System (INIS)

    Lee, Kyong-Hwan; Shin, Dae-Hyun

    2007-01-01

    Pyrolysis of a waste plastic mixture (high-density polyethylene: low-density polyethylene: polypropylene: polystyrene = 3:2:3:1) into a liquid product was carried out in a stirred semi-batch reactor at low (350 deg. C) and high (400 deg. C) temperatures. The effect of lapse time of reaction in the reactor and also degradation temperature on the characteristics of the liquid product from pyrolysis of the mixture was investigated. Liquid products were described by cumulative amount distribution, paraffin, olefin, naphthene and aromatic (PONA) distribution and molecular weight distribution. Their characteristic was quite differed with a lapse time of reaction and also at a low and high degradation temperatures, because of the different physicochemical properties of the plastic types in the mixture. With increase of lapse time of reaction, the order for the main products in PONA components obtained at 350 deg. C was firstly aromatic products and then olefin products, while at 400 deg. C the order was firstly aromatic products, then olefin products and finally paraffin products. The experiments also showed from the molecular weight distribution of liquid PONA components that the paraffin and olefin products had a wide distribution by mainly random scission of polymer, but in the case of olefin products were produced by an end-chain scission mechanism as well as random scission mechanism, as evidenced by much more light olefin products. This phenomenon was evident at a higher degradation temperature. Also, both the light olefin and naphthene products with a molecular weight of around 120, as a main product, showed a similar trend as a function of lapse time, which had a maximum fraction at 343 min (at 350 deg. C) and 83 min (at 400 deg. C). Among PONA components, the highest concentrations of aromatic products were obtained with a molecular weight of around 100 at the fastest lapse time of reaction, regardless of degradation temperature. It was concluded that the

  3. SYSTEM OF MODEL FOR TRAINING FUTURE MASTERS OF TOURISM, AS WELL AS THE ALGORITHM OF ITS PRODUCTIVE IMPLEMENTATION IN HIGHER EDUCATION

    Directory of Open Access Journals (Sweden)

    Larisa Beskorovaynaya

    2017-03-01

    Full Text Available On the basis of theoretical analysis author substantiates the system model of training future masters of tourism in higher education. The author found the methodological basis of preparation of future tourism masters in the field of higher education. In addition, theoretically grounded and model of the system of training of future masters of tourism, opened its components, a set of organizational and pedagogical conditions. System model of professional training of future masters of tourism in higher education, which is considered by us as an open, integrative, multi, mobile, adequate social requirements and individual needs of students, the educational system contains components: theoretical, methodological, structural and functional, design and technology, analytical criterion. The author proved that the model provides the opportunity to reflect, recreate individual readiness of future masters of tourism with a view to understanding its forecasting features, operation and further successful implementation in educational practice.The author researched and proposed algorithm productive use of the system model of training future tourism masters in the field of higher education. Based on the results of research made a some conclusion. Further prospective research directions are also provided.

  4. Timing and placement of cattle manure and/or gliricidia affects cotton and sunflower nutrient accumulation and biomass productivity.

    Science.gov (United States)

    Primo, Dário C; Menezes, Rômulo S C; Oliveira, Fabio F DE; Dubeux Júnior, José Carlos B; Sampaio, Everardo V S B

    2018-01-01

    Organic fertilizers are a viable alternative to increase oilseed productivity in family agriculture systems. The study aimed to evaluate the effects of timing and placement of cattle manure and/or gliricidia (Gliricidia sepium Jacq. Walp) prunings on cotton (Gossipium hirsutum L.) and sunflower (Helianthus annuus L.) nutrient accumulation and biomass productivity. Experiments were carried out in 2010 and 2011 in Taperoá, Paraíba, Brazil. The organic fertilization treatments were: GI - gliricidia incorporated before planting; GS - gliricidia applied on surface 45 days after planting (DAP); MI + GI - manure and gliricidia incorporated before planting; MI + GS - manure incorporated before planting and gliricídia applied on the surface 45 DAP; MI - manure incorporated before planting; and T - with no organic fertilization. In 2010, treatment MI + GS increased N, P, and K accumulation in cotton (12 and 7 kg ha-1) as well as in sunflower (20 and 29 kg ha-1). In 2011, GI and GS treatments resulted in higher N, P, K accumulations in both crops. The highest cotton productivity in 2010 was obtained with MI + GS treatment (198 kg ha-1) and in 2011 with GS treatment (594 kg ha-1). For sunflower, MI + GS treatment yielded the highest productivity in 2010 (466 kg ha-1) and GI treatment in 2011 (3542 kg ha-1). GI and MI + GS treatments increased total biomass productivity for cotton and sunflower. The treatment that combined both cattle manure incorporated into the soil before planting and gliricidia applied on the surface 45 days after planting was the most viable management strategy.

  5. Coproduct and star product in field theories on Lie-algebra noncommutative space-times

    International Nuclear Information System (INIS)

    Amelino-Camelia, Giovanni; Arzano, Michele

    2002-01-01

    We propose a new approach to field theory on κ-Minkowski noncommutative space-time, a popular example of Lie-algebra space-time. Our proposal is essentially based on the introduction of a star product, a technique which is proving to be very fruitful in analogous studies of canonical noncommutative space-times, such as the ones recently found to play a role in the description of certain string-theory backgrounds. We find to be incorrect the expectation, previously reported in the literature, that the lack of symmetry of the κ-Poincare coproduct should lead to interaction vertices that are not symmetric under exchanges of the momenta of identical particles entering the relevant processes. We show that in κ-Minkowski the coproduct and the star product must indeed treat momenta in a nonsymmetric way, but the overall structure of interaction vertices is symmetric under exchange of identical particles. We also show that in κ-Minkowski field theories it is convenient to introduce the concepts of 'planar' and 'nonplanar' Feynman loop diagrams, again in close analogy with the corresponding concepts previously introduced in the study of field theories in canonical noncommutative space-times

  6. Time and temperature dependence of cascade induced defect production in in situ experiments and computer simulation

    International Nuclear Information System (INIS)

    Ishino, Shiori

    1993-01-01

    Understanding of the defect production and annihilation processes in a cascade is important in modelling of radiation damage for establishing irradiation correlation. In situ observation of heavy ion radiation damage has a great prospect in this respect. Time and temperature dependence of formation and annihilation of vacancy clusters in a cascade with a time resolution of 30 ms has been studied with a facility which comprises a heavy ion accelerator and an electron microscope. Formation and annihilation rates of defect clusters have been separately measured by this technique. The observed processes have been analysed by simple kinetic equations, taking into account the sink effect of surface and the defect clusters themselves together with the annihilation process due to thermal emission of vacancies from the defect clusters. Another tool to study time and temperature dependence of defect production in a cascade is computer simulation. Recent results of molecular dynamics calculations on the temperature dependence of cascade evolution are presented, including directional and temperature dependence of the lengths of replacement collision sequences, temperature dependence of the process to reach thermal equilibrium and so on. These results are discussed under general time frame of radiation damage evolution covering from 10 -15 to 10 9 s, and several important issues for the general understanding have been identified. (orig.)

  7. New products from the power merchant to customer with time measurements and load management

    International Nuclear Information System (INIS)

    Solem, Gerd; Doorman, Gerard; Grande, Ove S.

    2003-01-01

    The main aim is to develop products from the power merchants that improve the consumer flexibility. For the development of the products the basis is that the consumption is measured by hours and that a connection to a load management scheme is present. Calculations for four products are made where the risk exposure is different for the customer and the supplier. The four products are ''Spot price with mark-up'', ''The combination of constant price and spot price'', ''Constant price with disconnection'' and ''Effect subscription''. The customers are exposed to the spot price in the first two products and may through disconnection reduce the costs by adapting to the market signals. Remote disconnection of parts of the consumption may be offered as a service jointly by the network companies and the power suppliers through a two-way communication but it is not realistic that the customers may pay much for this. ''Spot price with mark-up'' implies that the customer carries the entire risk while constant price may place considerable risk at the power supplier by long high consumption combined with high spot prices. '' Constant price with disconnection'' gives the power supplier the possibilities of reducing the risks. A disconnection possibility that is committing to the customers may be part of the product specification. The customers may be offered a discount calculated out from the costs for alternative price securing. Also '' Effect subscription'' reduces the merchant risks considerably at the disconnection of the consumption. The ''combined product of constant and spot price'' may be interesting from the supplier's viewpoint due to considerable risk reductions compared to solely using the constant price. The product gives the customers a guaranteed price for a part of the product and has an additional possibility of adapting the consumption to the market signals. The network company routines for handling of the hour values are a large challenge. It is important to

  8. Time-invariant PT product and phase locking in PT -symmetric lattice models

    Science.gov (United States)

    Joglekar, Yogesh N.; Onanga, Franck Assogba; Harter, Andrew K.

    2018-01-01

    Over the past decade, non-Hermitian, PT -symmetric Hamiltonians have been investigated as candidates for both a fundamental, unitary, quantum theory and open systems with a nonunitary time evolution. In this paper, we investigate the implications of the former approach in the context of the latter. Motivated by the invariance of the PT (inner) product under time evolution, we discuss the dynamics of wave-function phases in a wide range of PT -symmetric lattice models. In particular, we numerically show that, starting with a random initial state, a universal, gain-site location dependent locking between wave-function phases at adjacent sites occurs in the PT -symmetry-broken region. Our results pave the way towards understanding the physically observable implications of time invariants in the nonunitary dynamics produced by PT -symmetric Hamiltonians.

  9. Optimal batch production strategies under continuous price decrease and time discounting

    Directory of Open Access Journals (Sweden)

    Mandal S.

    2007-01-01

    Full Text Available Single price discount in unit cost for bulk purchasing is quite common in reality as well as in inventory literature. However, in today's high-tech industries such as personal computers and mobile industries, continuous decrease in unit cost is a regular phenomenon. In the present paper, an attempt has been made to investigate the effects of continuous price decrease and time-value of money on optimal decisions for inventoried goods having time-dependent demand and production rates. The proposed models are developed over a finite time horizon considering both shortages and without shortages in inventory. Numerical examples are taken to illustrate the developed models and to examine the sensitivity of model parameters.

  10. Creation and clinical application of real-time dose monitor using dose area product meter

    International Nuclear Information System (INIS)

    Matsubara, Kosuke; Uoyama, Yoshinori; Iida, Hiroji; Mizushima, Takashi

    2004-01-01

    The management of patient dose has become more of an issue in recent years. Dose can be determined non-invasively and in real time through the use of a dose area product meter, but it is the area dose value that is obtained. Therefore, we created a program that estimates entrance skin dose (ESD) in real time from area dose values obtained during procedures. We used Microsoft Visual C++ 6.0 (Standard Edition) for the programming language and C language for the programming environment. The value was a maximum 285.4 mGy at ileus tube insertion when measuring ESD for radiography of the digestive organ and non-vascular type interventional radiology (IVR) using the created program and seeking the average according to the procedures. The program that we created can be considered valid for monitoring ESD correctly and in real time. (author)

  11. The effect of organic solvent, temperature and mixing time on the production of oil from Moringa oleifera seeds

    Science.gov (United States)

    Ghazali, Q.; Yasin, N. H. M.

    2016-06-01

    The effect of three different organic solvent, temperature and mixing time on the production of oil from M.oleifera seeds were studied to evaluate the effectiveness in obtaining the high oil yield based on the percentage of oil production. The modified version of Soxhlet extraction method was carried out to extract the oil from M.oleifera seeds by using hexane, heptane and ethanol as the organic solvent. Among the three solvents, it is found that heptane yield higher oil from M.oleifera seeds with maximum oil yield of 36.37% was obtained followed by hexane and ethanol with 33.89% and 18.46%, respectively. By using heptane as a solvent, the temperature (60oC, 70oC, 80oC) and mixing time (6 h, 7 h, and 8 h) were investigated to ensure the high oil yield over the experimental ranges employed and high oil yield was obtained at 600C for 6 h with percentage oil yield of 36.37%. The fatty acid compositions of M.oleifera seeds oil were analyzed using Gas Chromatography/Mass Spectrometry (GC-MS). The main components of fatty acid contained in the oil extracted from M.oleifera seeds was oleic acid, followed by palmitic acid and arachidic acid, and small amount of behenic acid and margaric acid.

  12. Work productivity and activity impairment in gastroesophageal reflux disease in Korean full-time employees: a multicentre study.

    Science.gov (United States)

    Shin, Woon Geon; Kim, Heung Up; Kim, Sang Gyun; Kim, Gwang Ha; Shim, Ki-Nam; Kim, Jeong Wook; Kim, Jin Il; Kim, Jae Gyu; Kim, Jae J; Yim, Da-Hae; Park, Sue K; Park, Soo-Heon

    2012-04-01

    The costs of gastroesophageal reflux disease have not been assessed in Asia, even though the prevalence of gastroesophageal reflux disease is gradually increasing. We evaluated work presenteeism and absenteeism as indirect costs of gastroesophageal reflux disease in Korea. This was a cross-sectional and multicentre study using patient-reported outcome instruments. A total of 1009 full-time employees who visited the gastrointestinal department for any reason (281 patients with gastroesophageal reflux disease and 728 controls) were included. Main outcomes were presenteeism and absenteeism measured as work productivity loss and monetary cost per week. Absenteeism and presenteeism were significantly higher in the gastroesophageal reflux disease than the control group (1.49% vs. 0.46%, P=0.0010; 34.13% vs. 9.23%, Pgastroesophageal reflux disease than the control group (33.09% vs. 9.02%; Pgastroesophageal reflux disease group compared with the control group. Assuming average hourly wages of $14.12, the weekly burden of gastroesophageal reflux disease reached $165.07 per person. Gastroesophageal reflux disease was associated with substantial work productivity loss, mainly due to presenteeism rather than absenteeism, in Korean full-time employees. Copyright © 2011 Editrice Gastroenterologica Italiana S.r.l. Published by Elsevier Ltd. All rights reserved.

  13. SMOS near-real-time soil moisture product: processor overview and first validation results

    Science.gov (United States)

    Rodríguez-Fernández, Nemesio J.; Muñoz Sabater, Joaquin; Richaume, Philippe; de Rosnay, Patricia; Kerr, Yann H.; Albergel, Clement; Drusch, Matthias; Mecklenburg, Susanne

    2017-10-01

    Measurements of the surface soil moisture (SM) content are important for a wide range of applications. Among them, operational hydrology and numerical weather prediction, for instance, need SM information in near-real-time (NRT), typically not later than 3 h after sensing. The European Space Agency (ESA) Soil Moisture and Ocean Salinity (SMOS) satellite is the first mission specifically designed to measure SM from space. The ESA Level 2 SM retrieval algorithm is based on a detailed geophysical modelling and cannot provide SM in NRT. This paper presents the new ESA SMOS NRT SM product. It uses a neural network (NN) to provide SM in NRT. The NN inputs are SMOS brightness temperatures for horizontal and vertical polarizations and incidence angles from 30 to 45°. In addition, the NN uses surface soil temperature from the European Centre for Medium-Range Weather Forecasts (ECMWF) Integrated Forecast System (IFS). The NN was trained on SMOS Level 2 (L2) SM. The swath of the NRT SM retrieval is somewhat narrower (˜ 915 km) than that of the L2 SM dataset (˜ 1150 km), which implies a slightly lower revisit time. The new SMOS NRT SM product was compared to the SMOS Level 2 SM product. The NRT SM data show a standard deviation of the difference with respect to the L2 data of Organisation for the Exploitation of Meteorological Satellites (EUMETSAT) multicast service (EUMETCast).

  14. Mathematical supply-chain modelling: Product analysis of cost and time

    International Nuclear Information System (INIS)

    Easters, D J

    2014-01-01

    Establishing a mathematical supply-chain model is a proposition that has received attention due to its inherent benefits of evolving global supply-chain efficiencies. This paper discusses the prevailing relationships found within apparel supply-chain environments, and contemplates the complex issues indicated for constituting a mathematical model. Principal results identified within the data suggest, that the multifarious nature of global supply-chain activities require a degree of simplification in order to fully dilate the necessary factors which affect, each sub-section of the chain. Subsequently, the research findings allowed the division of supply-chain components into sub-sections, which amassed a coherent method of product development activity. Concurrently, the supply-chain model was found to allow systematic mathematical formulae analysis, of cost and time, within the multiple contexts of each subsection encountered. The paper indicates the supply-chain model structure, the mathematics, and considers how product analysis of cost and time can improve the comprehension of product lifecycle management

  15. Relative planting times on the production components in sesame/cowpea bean intercropping in organic system

    Directory of Open Access Journals (Sweden)

    Afrânio César de Araújo

    2013-12-01

    Full Text Available Aiming at better land use, small farmers usually plant sesame and cowpea bean intercropped with other crops. The aim of this work was to analyze and quantify the influence of four relative planting times of the cowpea bean in intercropping with sesame from the standpoint of their production components, plant productivity and the index of land equivalent ratio (LER. The field experiment was conducted in a randomized blocks with four treatments and four replicates. The treatments were the sesame and the cowpea bean in intercropping with the cowpea bean planted at the same time, 7, 14 and 21days after than the sesame. A greater part of the production components of both the sesame as well the cowpea bean was affected by the intercropping and significant differences were noted among the treatments in a larger part of the parameters. As the planting of the cowpea bean became more distant from that of the sesame, the yield of the Pedaliaceae increased and the yield of the Fabaceae decreased. The results for LER findings on the other hand suggest that in the sesame/cowpea bean intercropping, when the Fabaceae is planted seven days after the sesame, there is better use of the land and a largest possibility to the producer earning a profit.

  16. Mathematical supply-chain modelling: Product analysis of cost and time

    Science.gov (United States)

    Easters, D. J.

    2014-03-01

    Establishing a mathematical supply-chain model is a proposition that has received attention due to its inherent benefits of evolving global supply-chain efficiencies. This paper discusses the prevailing relationships found within apparel supply-chain environments, and contemplates the complex issues indicated for constituting a mathematical model. Principal results identified within the data suggest, that the multifarious nature of global supply-chain activities require a degree of simplification in order to fully dilate the necessary factors which affect, each sub-section of the chain. Subsequently, the research findings allowed the division of supply-chain components into sub-sections, which amassed a coherent method of product development activity. Concurrently, the supply-chain model was found to allow systematic mathematical formulae analysis, of cost and time, within the multiple contexts of each subsection encountered. The paper indicates the supply-chain model structure, the mathematics, and considers how product analysis of cost and time can improve the comprehension of product lifecycle management.

  17. Influence of solids retention time on membrane fouling: characterization of extracellular polymeric substances and soluble microbial products.

    Science.gov (United States)

    Duan, Liang; Tian, Zhiyong; Song, Yonghui; Jiang, Wei; Tian, Yuan; Li, Shan

    2015-01-01

    The objective of this study was to investigate the influence of solids retention time (SRT) on membrane fouling and the characteristics of biomacromolecules. Four identical laboratory-scale membrane bioreactors (MBRs) were operated with SRTs for 10, 20, 40 and 80 days. The results indicated that membrane fouling occurred faster and more readily under short SRTs. Fouling resistance was the primary source of filtration resistance. The modified fouling index (MFI) results suggested that the more ready fouling at short SRTs could be attributed to higher concentrations of soluble microbial products (SMP). Fourier transform infrared (FTIR) spectra indicated that the SRT had a weak influence on the functional groups of the total extracellular polymeric substances (TEPS) and SMP. However, the MBR under a short SRT had more low-molecular-weight (MW) compounds (100 kDa). Aromatic protein and tryptophan protein-like substances were the dominant groups in the TEPS and SMP, respectively.

  18. Paralinguistic mechanisms of production in human "beatboxing": a real-time magnetic resonance imaging study.

    Science.gov (United States)

    Proctor, Michael; Bresch, Erik; Byrd, Dani; Nayak, Krishna; Narayanan, Shrikanth

    2013-02-01

    Real-time magnetic resonance imaging (rtMRI) was used to examine mechanisms of sound production by an American male beatbox artist. rtMRI was found to be a useful modality with which to study this form of sound production, providing a global dynamic view of the midsagittal vocal tract at frame rates sufficient to observe the movement and coordination of critical articulators. The subject's repertoire included percussion elements generated using a wide range of articulatory and airstream mechanisms. Many of the same mechanisms observed in human speech production were exploited for musical effect, including patterns of articulation that do not occur in the phonologies of the artist's native languages: ejectives and clicks. The data offer insights into the paralinguistic use of phonetic primitives and the ways in which they are coordinated in this style of musical performance. A unified formalism for describing both musical and phonetic dimensions of human vocal percussion performance is proposed. Audio and video data illustrating production and orchestration of beatboxing sound effects are provided in a companion annotated corpus.

  19. Time-bound product returns and optimal order quantities for mass merchandisers

    Science.gov (United States)

    Yu, Min-Chun; Goh, Mark

    2012-01-01

    The return guidelines for a mass merchandiser usually entail a grace period, a markdown on the original price and the condition of the returned items. This research utilises eight scenarios formed from the variation of possible return guidelines to model the cost functions of single-product categories for a typical mass merchandiser. Models for the eight scenarios are developed and solved with the objective of maximising the expected profit so as to obtain closed form solutions for the associated optimal order quantity. An illustrative example and sensitivity analysis are provided to demonstrate the applicability of the model. Our results show that merchandisers who allow for returns within a time window, albeit with a penalty cost imposed and the returned products being recoverable, should plan for larger order amounts as such products do not affect the business. Similarly, the merchandisers who allow for returns beyond a grace period and without any penalty charges, but where the returned products are irrecoverable, should manage their stocks in this category more judiciously by ordering as little as possible so as to limit the number of returns and carefully consider the effects of their customer satisfaction-guaranteed policies, if any.

  20. Simulation model for improved production planning and control through quality, cycle time and batch size management

    Directory of Open Access Journals (Sweden)

    Kotevski Živko

    2015-01-01

    Full Text Available Production planning and control (PPC systems are the base of all production facilities. In today's surroundings, having a good PPC system generates lots of benefits for the companies. But, having an excellent PPC system provides great competitive advantage and serious reduction of cost in many fields. In order to get to a point of having excellent PPC, the companies turn more and more to the newest software tools, for simulations as an example. Considering today's advanced computer technology, by using the simulations in this area, companies will have strong asset when dealing with different kinds of wastes, delays, overstock, bottlenecks and generally loss of time. This model is applicable in almost all production facilities. Taking into account the different scrap percentages for the pieces that form the end product, a detailed model and analysis were made in order to determine the optimal starting parameters. At first all the conditions of the company were determined, conceptual model was created along with all assumptions. Then the model was verified and validated and at the end a cost benefit analysis was conducted in order to have clear results.

  1. NASA Langley Atmospheric Science Data Centers Near Real-Time Data Products

    Science.gov (United States)

    Davenport, T.; Parker, L.; Rinsland, P. L.

    2014-12-01

    Over the past decade the Atmospheric Science Data Center (ASDC) at NASA Langley Research Center has archived and distributed a variety of satellite mission data sets. NASA's goal in Earth science is to observe, understand, and model the Earth system to discover how it is changing, to better predict change, and to understand the consequences for life on Earth. The ASDC has collaborated with Science Teams to accommodate emerging science users in the climate and modeling communities. The ASDC has expanded its original role to support operational usage by related Earth Science satellites, support land and ocean assimilations, support of field campaigns, outreach programs, and application projects for agriculture and energy industries to bridge the gap between Earth science research results and the adoption of data and prediction capabilities for reliable and sustained use in Decision Support Systems (DSS). For example; these products are being used by the community performing data assimilations to regulate aerosol mass in global transport models to improve model response and forecast accuracy, to assess the performance of components of a global coupled atmospheric-ocean climate model, improve atmospheric motion vector (winds) impact on numerical weather prediction models, and to provide internet-based access to parameters specifically tailored to assist in the design of solar and wind powered renewable energy systems. These more focused applications often require Near Real-Time (NRT) products. Generating NRT products pose their own unique set challenges for the ASDC and the Science Teams. Examples of ASDC NRT products and challenges will be discussed.

  2. Fast Estimation Method of Space-Time Two-Dimensional Positioning Parameters Based on Hadamard Product

    Directory of Open Access Journals (Sweden)

    Haiwen Li

    2018-01-01

    Full Text Available The estimation speed of positioning parameters determines the effectiveness of the positioning system. The time of arrival (TOA and direction of arrival (DOA parameters can be estimated by the space-time two-dimensional multiple signal classification (2D-MUSIC algorithm for array antenna. However, this algorithm needs much time to complete the two-dimensional pseudo spectral peak search, which makes it difficult to apply in practice. Aiming at solving this problem, a fast estimation method of space-time two-dimensional positioning parameters based on Hadamard product is proposed in orthogonal frequency division multiplexing (OFDM system, and the Cramer-Rao bound (CRB is also presented. Firstly, according to the channel frequency domain response vector of each array, the channel frequency domain estimation vector is constructed using the Hadamard product form containing location information. Then, the autocorrelation matrix of the channel response vector for the extended array element in frequency domain and the noise subspace are calculated successively. Finally, by combining the closed-form solution and parameter pairing, the fast joint estimation for time delay and arrival direction is accomplished. The theoretical analysis and simulation results show that the proposed algorithm can significantly reduce the computational complexity and guarantee that the estimation accuracy is not only better than estimating signal parameters via rotational invariance techniques (ESPRIT algorithm and 2D matrix pencil (MP algorithm but also close to 2D-MUSIC algorithm. Moreover, the proposed algorithm also has certain adaptability to multipath environment and effectively improves the ability of fast acquisition of location parameters.

  3. The real-time gas mass filter system for the analysis of products from trichloroethylene-air mixture during electron beam irradiation

    International Nuclear Information System (INIS)

    Hakoda, Teruyuki; Arai, Hidehiko; Hashimoto, Shoji

    2001-01-01

    The real-time gas mass filter system consisting of a mass filter and a capillary sampling tube was developed for the analysis of products during electron beam (EB) irradiation of trichloroethylene (TCE)-air mixture. Interesting trace substances in gases are analyzed by this gas mass filter system in real time. The gases at atmospheric pressure are introduced to the mass filter under vacuum through a capillary tube without packing. The system was calibrated with three different standard mono-gases which contain known concentrations of sulfur dioxide, benzene and chlorobenzene for each. And its detectable limits for each gas were in the range of 0.7-1 ppmv. Products of irradiated TCE-air mixture were analyzed with the system in real time. The concentrations of dichloroacetyl chloride and carbonyl chloride (COCl 2 ) increased by low dose irradiation when TCE was decomposed. These products decreased by higher dose irradiation and were identified as primary products. Trichloroethylene and these primary products were oxidized into CO 2 , Cl 2 , and HCl at 15 kGy. Carbonyl chloride was dissolved in NaOH aq for natural-oxidation into CO 3 2- and Cl - . The doses for the complete oxidation of TCE and the products were decreased from 15 to 7 kGy by the combination of the irradiation and the dissolution of the irradiated gas. The decomposition mechanism of TCE, especially formation of COCl 2 , was clarified from the change of the products as a function of dose. (author)

  4. Higher body mass index and lower intake of dairy products predict poor glycaemic control among Type 2 Diabetes patients in Malaysia.

    Science.gov (United States)

    Shu, Ping Soon; Chan, Yoke Mun; Huang, Soo Lee

    2017-01-01

    This cross-sectional study was designed to determine factors contributing to glyceamic control in order to provide better understanding of diabetes management among Type 2 Diabetes patients. A pre-tested structured questionnaire was used to obtain information on socio-demographic and medical history. As a proxy measure for glycaemic control, glycosylated haemoglobin (HbA1c) was obtained as secondary data from the medical reports. Perceived self-care barrier on diabetes management, diet knowledge and skills, and diet quality were assessed using pretested instruments. With a response rate of 80.3%, 155 subjects were recruited for the study. Mean HbA1c level of the subjects was 9.02 ± 2.25% with more than 70% not able to achieve acceptable level in accordance to WHO recommendation. Diet quality of the subjects was unsatisfactory especially for vegetables, fruits, fish and legumes as well as from the milk and dairy products group. Higher body mass index (BMI), poorer medication compliance, lower diet knowledge and skill scores and lower intake of milk and dairy products contributed significantly on poor glycaemic control. In conclusion, while perceived self-care barriers and diet quality failed to predict HbA1c, good knowledge and skill ability, together with appropriate BMI and adequate intake of dairy products should be emphasized to optimize glycaemic control among type 2 diabetes patients.

  5. Higher body mass index and lower intake of dairy products predict poor glycaemic control among Type 2 Diabetes patients in Malaysia.

    Directory of Open Access Journals (Sweden)

    Ping Soon Shu

    Full Text Available This cross-sectional study was designed to determine factors contributing to glyceamic control in order to provide better understanding of diabetes management among Type 2 Diabetes patients. A pre-tested structured questionnaire was used to obtain information on socio-demographic and medical history. As a proxy measure for glycaemic control, glycosylated haemoglobin (HbA1c was obtained as secondary data from the medical reports. Perceived self-care barrier on diabetes management, diet knowledge and skills, and diet quality were assessed using pretested instruments. With a response rate of 80.3%, 155 subjects were recruited for the study. Mean HbA1c level of the subjects was 9.02 ± 2.25% with more than 70% not able to achieve acceptable level in accordance to WHO recommendation. Diet quality of the subjects was unsatisfactory especially for vegetables, fruits, fish and legumes as well as from the milk and dairy products group. Higher body mass index (BMI, poorer medication compliance, lower diet knowledge and skill scores and lower intake of milk and dairy products contributed significantly on poor glycaemic control. In conclusion, while perceived self-care barriers and diet quality failed to predict HbA1c, good knowledge and skill ability, together with appropriate BMI and adequate intake of dairy products should be emphasized to optimize glycaemic control among type 2 diabetes patients.

  6. Production characteristics of lettuce Lactuca sativa L. in the frame of the first crop tests in the Higher Plant Chamber integrated into the MELiSSA Pilot Plant

    Science.gov (United States)

    Tikhomirova, Natalia; Lawson, Jamie; Stasiak, Michael; Dixon, Mike; Paille, Christel; Peiro, Enrique; Fossen, Arnaud; Godia, Francesc

    Micro-Ecological Life Support System Alternative (MELiSSA) is an artificial closed ecosystem that is considered a tool for the development of a bioregenerative life support system for manned space missions. One of the five compartments of MELiSSA loop -Higher Plant Chamber was recently integrated into the MELiSSA Pilot Plant facility at Universitat Aut`noma deo Barcelona. The main contributions expected by integration of this photosynthetic compartment are oxygen, water, vegetable food production and CO2 consumption. Production characteristics of Lactuca sativa L., as a MELiSSA candidate crop, were investigated in this work in the first crop experiments in the MELiSSA Pilot Plant facility. The plants were grown in batch culture and totaled 100 plants with a growing area 5 m long and 1 m wide in a sealed controlled environment. Several replicates of the experiments were carried out with varying duration. It was shown that after 46 days of lettuce cultivation dry edible biomass averaged 27, 2 g per plant. However accumulation of oxygen in the chamber, which required purging of the chamber, and decrease in the food value of the plants was observed. Reducing the duration of the tests allowed uninterrupted test without opening the system and also allowed estimation of the crop's carbon balance. Results of productivity, tissue composition, nutrient uptake and canopy photosynthesis of lettuce regardless of test duration are discussed in the paper.

  7. Effect of cycle time on polyhydroxybutyrate (PHB) production in aerobic mixed cultures.

    Science.gov (United States)

    Ozdemir, Sebnem; Akman, Dilek; Cirik, Kevser; Cinar, Ozer

    2014-03-01

    The aim of this study was to investigate the effect of cycle time on polyhydroxybutyrate (PHB) production under aerobic dynamic feeding system. The acetate-fed feast and famine sequencing batch reactor was used to enrich PHB accumulating microorganism. Sequencing batch reactor (SBR) was operated in four different cycle times (12, 8, 4, and 2 h) fed with a synthetic wastewater. The system performance was determined by monitoring total dissolved organic carbon, dissolved oxygen, oxidation-reduction potential, and PHB concentration. In this study, under steady-state conditions, the feast period of the SBR was found to allow the PHB storage while a certain part of stored PHB was used for continued growth in famine period. The percentage PHB storages by aerobic microorganism were at 16, 18, 42, and 55% for the 12, 8, 4, and 2-h cycle times, respectively. The PHB storage was increased as the length of the cycle time was decreased, and the ratio of the feast compared to the total cycle length was increased from around 13 to 33% for the 12 and 2-h cycle times, respectively.

  8. Can increasing adult vaccination rates reduce lost time and increase productivity?

    Science.gov (United States)

    Rittle, Chad

    2014-12-01

    This article addresses limited vaccination coverage by providing an overview of the epidemiology of influenza, pertussis, and pneumonia, and the impact these diseases have on work attendance for the worker, the worker's family, and employer profit. Studies focused on the cost of vaccination programs, lost work time, lost employee productivity and acute disease treatment are discussed, as well as strategies for increasing vaccination coverage to reduce overall health care costs for employers. Communicating the benefits of universal vaccination for employees and their families and combating vaccine misinformation among employees are outlined. Copyright 2014, SLACK Incorporated.

  9. Resonant e+e- production by time-varying electromagnetic field

    International Nuclear Information System (INIS)

    Farakos, K.; Koutsoumbas, G.; Tiktopoulos, G.

    1990-01-01

    As pointed out by Cornwall and Tiktopoulos (CT) strong, time-varying electric fields may produce e + e - pairs in a resonant fashion. This effect could be related to the sharp peaks in the e + e - spectrum observed in the GSI heavy-ion collision experiments. We attempt to go beyond the case of spatially uniform fields discussed by CT. We find that resonant e + e - production indeed takes place for electric fields derived from four-potentials of the form A 1 =A 2 =A 0 =0, A 3 =δ(t)b(x 3 ) provided by b(x) has discontinuities with a jump at least equal to π. (orig.)

  10. A continuous time inventory model for a product recovery system with multiple options

    NARCIS (Netherlands)

    Kleber, R.; Minner, S.; Kiesmüller, G.P.

    2002-01-01

    Increasing environmental consciousness, limited availability of natural resources to manufacture new products, recovery quotas to avoid disposal, manufacturers assigned to be responsible for used products, and materials value of components included in returned products are incentives for product

  11. Effort-reward-imbalance in healthy teachers is associated with higher LPS-stimulated production and lower glucocorticoid sensitivity of interleukin-6 in vitro.

    Science.gov (United States)

    Bellingrath, Silja; Rohleder, Nicolas; Kudielka, Brigitte M

    2013-02-01

    According to the effort-reward-imbalance (ERI) model, a lack of reciprocity between costs and gains at work increases the risk for adverse health outcomes. Inflammation has been shown to play a crucial role in a variety of stress-related diseases and alterations in immune system glucocorticoid sensitivity may help to explain the increased risk for cardiovascular disease (CVD) and depression related to chronic work stress. Changes in lipopolysaccharide (LPS)-induced interleukin (IL)-6 production and inhibition of IL-6 production by dexamethasone in reaction to the Trier Social Stress Test (TSST) were assessed in forty-six healthy school teachers to test whether chronic work stress is accompanied by alterations in inflammatory activity and glucocorticoid sensitivity of the innate immune system. High ERI was associated with an increase in pro-inflammatory potential, reflected in elevated IL-6 production before and after stress and with a lower capacity of dexamethasone to suppress IL-6 production in vitro over all measurement time points. ERI was not associated with stress-related changes in GC sensitivity. The present findings suggest a less effective anti-inflammatory regulation by glucocorticoids in teachers suffering from chronic work stress. Copyright © 2012 Elsevier B.V. All rights reserved.

  12. Sleep Deprivation in Young and Healthy Subjects Is More Sensitively Identified by Higher Frequencies of Electrodermal Activity than by Skin Conductance Level Evaluated in the Time Domain

    Directory of Open Access Journals (Sweden)

    Hugo F. Posada-Quintero

    2017-06-01

    Full Text Available We analyzed multiple measures of the autonomic nervous system (ANS based on electrodermal activity (EDA and heart rate variability (HRV for young healthy subjects undergoing 24-h sleep deprivation. In this study, we have utilized the error awareness test (EAT every 2 h (13 runs total, to evaluate the deterioration of performance. EAT consists of trials where the subject is presented words representing colors. Subjects are instructed to press a button (“Go” trials or withhold the response if the word presented and the color of the word mismatch (“Stroop No-Go” trial, or the screen is repeated (“Repeat No-Go” trials. We measured subjects' (N = 10 reaction time to the “Go” trials, and accuracy to the “Stroop No-Go” and “Repeat No-Go” trials. Simultaneously, changes in EDA and HRV indices were evaluated. Furthermore, the relationship between reactiveness and vigilance measures and indices of sympathetic control based on HRV were analyzed. We found the performance improved to a stable level from 6 through 16 h of deprivation, with a subsequently sustained impairment after 18 h. Indices of higher frequencies of EDA related more to vigilance measures, whereas lower frequencies index (skin conductance leve, SCL measured the reactiveness of the subject. We conclude that indices of EDA, including those of the higher frequencies, termed TVSymp, EDASymp, and NSSCRs, provide information to better understand the effect of sleep deprivation on subjects' autonomic response and performance.

  13. Do later wake times and increased sleep duration of 12th graders result in more studying, higher grades, and improved SAT/ACT test scores?

    Science.gov (United States)

    Cole, James S

    2016-09-01

    The aim of this study was to investigate the relationship between sleep duration, wake time, and hours studying on high school grades and performance on the Scholastic Aptitude Test (SAT)/ American College Testing (ACT) college entrance exams. Data were collected from 13,071 recently graduated high school seniors who were entering college in the fall of 2014. A column proportions z test with a Bonferroni adjustment was used to analyze proportional differences. Analysis of covariance (ANCOVA) was used to examine mean group differences. Students who woke up prior to 6 a.m. and got less than 8 h of sleep (27 %) were significantly more likely to report studying 11 or more hours per week (30 %), almost double the rate compared to students who got more than 8 h of sleep and woke up the latest (16 %). Post hoc results revealed students who woke up at 7 a.m. or later reported significantly higher high school grades than all other groups (p students who woke up between 6:01 a.m. and 7:00 a.m. and got eight or more hours of sleep. The highest reported SAT/ACT scores were from the group that woke up after 7 a.m. but got less than 8 h sleep (M = 1099.5). Their scores were significantly higher than all other groups. This study provides additional evidence that increased sleep and later wake time are associated with increased high school grades. However, this study also found that students who sleep the longest also reported less studying and lower SAT/ACT scores.

  14. The Dubna double-arm time-of-flight spectrometer for heavy-ion reaction products

    International Nuclear Information System (INIS)

    Schilling, K.D.; Gippner, P.; Seidel, W.; Stary, F.; Will, E.; Heidel, K.; Lukyanov, S.M.; Penionzhkevich, Yu.E.; Salamatin, V.S.; Sodan, H.; Chubarian, G.G.

    1986-05-01

    The double-arm time-of-flight spectrometer DEMAS designed for the detection and identification of heavy-ion reaction products at incident energies below 10 MeV/amu is presented. Based on the kinematic coincidence method, the relevant physical information is obtained from the measurement of the two correlated velocity vectors of the binary fragments. Construction and performance of the different detector systems applied to measure the time-of-flight values, the position coordinates and the kinetic energies of both fragments are presented in detail. The description of the data acquisition and analysing procedures is followed by the discussion of some experimental examples to demonstrate the spectrometer performance. A mass resolution of typically 4 - 5 amu (fwhm) is routinely achieved. (author)

  15. Development of Aa New Time Temperature Indicator for Enzymatic Validation of Pasteurization of Meat Products.

    Science.gov (United States)

    Brizio, Ana Paula Dutra Resem; Prentice, Carlos

    2015-06-01

    This paper presents the development of a new smart time-temperature indicator (TTI) of pasteurization whose operating principle is based on the complexation reaction between starch and iodine, and the subsequent action of an amylase on this complex causing its discoloration at a rate dependent on time and temperature of the medium. Laboratory simulations and tests in a manufacturing plant evaluated different enzyme concentrations in the TTI prototypes when exposed to pasteurization conditions. The results showed that the color response of the indicators was visually interpreted as adaptive to measurement using appropriate equipment, with satisfactory reliability in all conditions studied. The TTI containing 6.5% amylase was one whose best results were suited for use in validating the cooking of hams. When attached to the primary packaging of the product, this TTI indicated the pasteurization process inexpensively, easily, accurately, and nondestructively. © 2015 Institute of Food Technologists®

  16. Status of IGS Ultra-Rapid Products for Real-Time Applications

    Science.gov (United States)

    Ray, J.; Griffiths, J.

    2008-12-01

    Since November 2000 the International GNSS Service (IGS) has produced Ultra-rapid (IGU) products for near real-time and real-time applications. They include GPS orbits, satellite clocks, and Earth rotation parameters for a sliding 48-hr period. The first day of each update is based on the most recent GPS observational data from the IGS hourly tracking network. At the time of release, these observed products have an initial latency of 3 hr. The second day of each update consists of predictions. So the predictions between about 3 and 9 hr into the second half are relevant for true real-time uses. Originally updated twice daily, the IGU products since April 2004 have been issued four times per day, at 3, 9, 15, and 21 UTC. Up to seven Analysis Centers (ACs) contribute to the IGU combinations: Astronomical Institute of the University of Berne (AIUB), European Space Operations Center (ESOC), Geodetic Observatory Pecny (GOP), GeoForschungsZentrum (GFZ) Potsdam, Natural Resources Canada (NRC), Scripps Insitution of Oceanography (SIO), U.S. Naval Observatory (USNO). This redundancy affords a high measure of reliability and enhanced orbit accuracy. IGU orbit precision has improved markedly since late 2007. This is due to a combination of factors: decommissioning of the old, poorly behaved PRN29 in October 2007; upgraded procedures implemented by GOP around the same time, by SIO in spring 2008, and by USNO in June 2008; better handling of maneuvered satellites at the combination level starting June 2008; and stricter AC rejection criteria since July 2008. As a consequence, the weighted 1D RMS residual of the IGU orbit predictions over their first 6 hr is currently about 20 to 30 mm (after a Helmert transformation) compared to the IGS Rapid orbits, averaged over the constellation. The median residual is about 15 to 20 mm. When extended to the full 24 hr prediction period, the IGU orbit errors approximately double. Systematic rotational offsets are probably more important than

  17. Higher Antioxidant Activity, Total Flavonols, and Specific Quercetin Glucosides in Two Different Onion (Allium cepa L.) Varieties Grown under Organic Production: Results from a 6-Year Field Study.

    Science.gov (United States)

    Ren, Feiyue; Reilly, Kim; Kerry, Joseph P; Gaffney, Michael; Hossain, Mohammad; Rai, Dilip K

    2017-06-28

    We carried out a 6-year study to assess the effect of conventional, organic, and mixed cultivation practices on bioactive compounds (flavonoids, anthocyanins) and antioxidant capacity in onion. Total flavonoids, total anthocyanins, individual flavonols, individual anthocyanins, and antioxidant activity were measured in two varieties ('Hyskin' and 'Red Baron') grown in a long-term split-plot factorial systems comparison trial. This is the first report of repeated measurements of bioactive content over an extensive time period in a single crop type within the same trial. Antioxidant activity (DPPH and FRAP), total flavonol content, and levels of Q 3,4' D and Q 3 G were higher in both varieties under fully organic compared to fully conventional management. Total flavonoids were higher in 'Red Baron' and when onions were grown under organic soil treatment. Differences were primarily due to different soil management practices used in organic agriculture rather than pesticide/ herbicide application.

  18. A Preliminary Examination of the Second Generation CMORPH Real-time Production

    Science.gov (United States)

    Joyce, R.; Xie, P.; Wu, S.

    2017-12-01

    The second generation CMORPH (CMORPH2) has started test real-time production of 30-minute precipitation estimates on a 0.05olat/lon grid over the entire globe, from pole-to-pole. The CMORPH2 is built upon the Kalman Filter based CMORPH algorithm of Joyce and Xie (2011). Inputs to the system include rainfall and snowfall rate retrievals from passive microwave (PMW) measurements aboard all available low earth orbit (LEO) satellites, precipitation estimates derived from infrared (IR) observations of geostationary (GEO) and LEO platforms, and precipitation simulations from the NCEP operational global forecast system (GFS). Inputs from the various sources are first inter-calibrated to ensure quantitative consistencies in representing precipitation events of different intensities through PDF calibration against a common reference standard. The inter-calibrated PMW retrievals and IR-based precipitation estimates are then propagated from their respective observation times to the target analysis time along the motion vectors of the precipitating clouds. Motion vectors are first derived separately from the satellite IR based precipitation estimates and the GFS precipitation fields. These individually derived motion vectors are then combined through a 2D-VAR technique to form an analyzed field of cloud motion vectors over the entire globe. The propagated PMW and IR based precipitation estimates are finally integrated into a single field of global precipitation through the Kalman Filter framework. A set of procedures have been established to examine the performance of the CMORPH2 real-time production. CMORPH2 satellite precipitation estimates are compared against the CPC daily gauge analysis, Stage IV radar precipitation over the CONUS, and numerical model forecasts to discover potential shortcomings and quantify improvements against the first generation CMORPH. Special attention has been focused on the CMORPH behavior over high-latitude areas beyond the coverage of the first

  19. The effect of organic loading rate and retention time on hydrogen production from a methanogenic CSTR.

    Science.gov (United States)

    Pakarinen, O; Kaparaju, P; Rintala, J

    2011-10-01

    The possibility of shifting a methanogenic process for hydrogen production by changing the process parameters viz., organic loading rate (OLR) and hydraulic retention time (HRT) was evaluated. At first, two parallel semi-continuously fed continuously stirred tank reactors (CSTR) were operated as methanogenic reactors (M1 and M2) for 78 days. Results showed that a methane yield of 198-218 L/kg volatile solids fed (VS(fed)) was obtained when fed with grass silage at an OLR of 2 kgVS/m³/d and HRT of 30 days. After 78 days of operation, hydrogen production was induced in M2 by increasing the OLR from 2 to 10 kgVS/m³/d and shortening the HRT from 30 to 6 days. The highest H₂ yield of 42 L/kgVS(fed) was obtained with a maximum H₂ content of 24%. The present results thus demonstrate that methanogenic process can be shifted towards hydrogen production by increasing the OLR and decreasing HRT. Copyright © 2011 Elsevier Ltd. All rights reserved.

  20. Detecting subsurface fluid leaks in real-time using injection and production rates

    Science.gov (United States)

    Singh, Harpreet; Huerta, Nicolas J.

    2017-12-01

    CO2 injection into geologic formations for either enhanced oil recovery or carbon storage introduces a risk for undesired fluid leakage into overlying groundwater or to the surface. Despite decades of subsurface CO2 production and injection, the technologies and methods for detecting CO2 leaks are still costly and prone to large uncertainties. This is especially true for pressure-based monitoring methods, which require the use of simplified geological and reservoir flow models to simulate the pressure behavior as well as background noise affecting pressure measurements. In this study, we propose a method to detect the time and volume of fluid leakage based on real-time measurements of well injection and production rates. The approach utilizes analogies between fluid flow and capacitance-resistance modeling. Unlike other leak detection methods (e.g. pressure-based), the proposed method does not require geological and reservoir flow models to simulate the behavior that often carry significant sources of uncertainty; therefore, with our approach the leak can be detected with greater certainty. The method can be applied to detect when a leak begins by tracking a departure in fluid production rate from the expected pattern. The method has been tuned to detect the effect of boundary conditions and fluid compressibility on leakage. To highlight the utility of this approach we use our method to detect leaks for two scenarios. The first scenario simulates a fluid leak from the storage formation into an above-zone monitoring interval. The second scenario simulates intra-reservoir migration between two compartments. We illustrate this method to detect fluid leakage in three different reservoirs with varying levels of geological and structural complexity. The proposed leakage detection method has three novelties: i) requires only readily-available data (injection and production rates), ii) accounts for fluid compressibility and boundary effects, and iii) in addition to

  1. REDUCTION OF MORTADELLA COOKING TIME AND EVALUATION OF THE FINAL PRODUCT QUALITY

    Directory of Open Access Journals (Sweden)

    Diones Orsolin

    2015-10-01

    Full Text Available In food industry, the cooking is one of the most important processes for the conservation and quality assurance of the final product, especially mortadella. However, this process requires high investment in modern equipment besides having energy and steam expenses.. In this context, the objective of this study was to propose a cooking method of mortadella produced with pork and chicken, by reducing time and increasing temperature inside the baking oven. Evaluations of behavior of water activity, pH and texture of the mortadella were carried out throughout shelf life. From the results, we found that both pork and chicken mortadella that were cooked by the current process and those that passed through the cooking process with reduced time showed no significant differences at the level of 95% confidence for the analyzed characteristics. Therefore, all treatments had similar values and can be considered within the established standards of product quality for both water activity and for pH and texture.

  2. Time series from hyperion to track productivity in pivot agriculture in saudi arabia

    KAUST Repository

    Houborg, Rasmus

    2017-12-13

    The hyperspectral satellite sensing capacity is expected to increase substantially in the near future with the planned deployment of hyperspectral systems by both space agencies and commercial companies. These enhanced observational resources will offer new and improved ways to monitor the dynamics and characteristics of terrestrial ecosystems. This study investigates the utility of time series of hyperspectral imagery, acquired by Hyperion onboard EO-1, for quantifying variations in canopy chlorophyll (Chlc), plant productivity, and yield over an intensive farming area in the desert of Saudi Arabia. Chlc is estimated on the basis of predictive multi-variate empirical models established via a machine learning approach using a training dataset of in-situ measured target variables and explanatory hyperspectral indices. Resulting time series of Chlc are translated into Gross Primary Productivity (GPP) and Yield based on semi-empirical relationships, and evaluated against ground-based observations. Results indicate significant benefit in utilizing the full suite of hyperspectral indices over multi-spectral indices constructible from Landsat-8 and Sentinel-2.

  3. The effect of temperature and Pasteurization time on Staphylococcus aureus isolates from dairy products

    Science.gov (United States)

    Yaniarti, Maria Nia; Amarantini, Charis; Budiarso, Tri Yahya

    2017-11-01

    Staphylococcus aureus is a potential pathogenic bacterial cause of disease in humans and animals due to the ability of adhesion to epithelial tissue. Many cases of food poisoning are caused by S. aureus bacteria. Therefore, the purpose of this study was to determine the effect of temperature and time on the growth of S. aureus isolates from milk products. The samples are derived from previous research namely pasteurized milk, street vendor and café milk, milk powder, and sweetened condensed milk products. The treatment temperatures and times studied were temperature 60 °C, 65 °C, 70 °C, 75 °C, 80 °C, and 30, 35, 40, 45, 50, 55, and 60 minutes. The results show that at temperatures of 60 °C and 65 °C, S. aureus isolates did not grow at 60 minutes. All isolates of S. aureus died when the temperatures were increased to 70 °C and 80 °C, at 50 and 20 minutes, respectively.

  4. Time series from hyperion to track productivity in pivot agriculture in saudi arabia

    KAUST Repository

    Houborg, Rasmus; McCabe, Matthew; Angel, Yoseline; Middleton, Elizabeth M.

    2017-01-01

    The hyperspectral satellite sensing capacity is expected to increase substantially in the near future with the planned deployment of hyperspectral systems by both space agencies and commercial companies. These enhanced observational resources will offer new and improved ways to monitor the dynamics and characteristics of terrestrial ecosystems. This study investigates the utility of time series of hyperspectral imagery, acquired by Hyperion onboard EO-1, for quantifying variations in canopy chlorophyll (Chlc), plant productivity, and yield over an intensive farming area in the desert of Saudi Arabia. Chlc is estimated on the basis of predictive multi-variate empirical models established via a machine learning approach using a training dataset of in-situ measured target variables and explanatory hyperspectral indices. Resulting time series of Chlc are translated into Gross Primary Productivity (GPP) and Yield based on semi-empirical relationships, and evaluated against ground-based observations. Results indicate significant benefit in utilizing the full suite of hyperspectral indices over multi-spectral indices constructible from Landsat-8 and Sentinel-2.

  5. Structural and productive characteristics of Marandu and Xaraés grasses fertilized at different times after harvesting

    Directory of Open Access Journals (Sweden)

    Rosana Cristina Pereira

    2012-03-01

    Full Text Available The objective of this study was to assess the effect of applying N and K2O at different times after harvest on the structure and production characteristics of Marandu and Xaraés cultivars of Brachiaria brizantha. Two greenhouse 4 × 2 factorial experiments using a randomized block design with eight treatments and four replicates were carried out. In experiment 1, the plants in pots were fertilized weekly with 50 mg/dm³ of N and K2O until a week before a uniformity cut, for a total of four applications. After cutting, plants were fertilized with 50 mg/dm³ of N and K2O at 0, 3, 6, and 9 days. Cultivars were evaluated after 44 days of regrowth. In experiment 2, a single 50 mg/dm³ dose of N and K2O was applied a week before the uniformity cut, and 100 mg/dm³ of N and K2O were applied at 0, 4, 8, and 12 days after cutting; cultivars were evaluated after 39 days of regrowth. In experiment 1, the leaf/stem ratio and dry matter yield were influenced by the time at which fertilizers were applied. In the second experiment, the total number of leaves, expanded leaves, dead leaves, and the leaf lamina accumulated length and dry matter production were influenced by the time at which fertilizers were applied. Marandugrass had more leaves and tillers than cv. Xaraés, which, in turn, had greater height, dry matter yield and regrowth vigor. Applying nitrogen and potassium fertilizer immediately after cutting improves the structural characteristics, while the dry matter yield is maximized by applying fertilizers immediately after cutting by using lower doses of N, or at 4.5 days after cutting by using higher doses of N.

  6. A Timed Colored Petri Net Simulation-Based Self-Adaptive Collaboration Method for Production-Logistics Systems

    OpenAIRE

    Zhengang Guo; Yingfeng Zhang; Xibin Zhao; Xiaoyu Song

    2017-01-01

    Complex and customized manufacturing requires a high level of collaboration between production and logistics in a flexible production system. With the widespread use of Internet of Things technology in manufacturing, a great amount of real-time and multi-source manufacturing data and logistics data is created, that can be used to perform production-logistics collaboration. To solve the aforementioned problems, this paper proposes a timed colored Petri net simulation-based self-adaptive colla...

  7. OPTIMIZATION OF TIMES AND COSTS OF PROJECT OF HORIZONTAL LAMINATOR PRODUCTION USING PERT/CPM TECHNICAL

    Directory of Open Access Journals (Sweden)

    Fernando Henrique Lermen

    2016-09-01

    Full Text Available The PERT/CPM is a technique widely used in both the scheduling and in the project feasibility in terms of cost control and time.  In order to optimize time and costs involved in production, the work presented here aims to apply the PERT/CPM technique in the production project of the Horizontal Laminator, a machine used to cut polyurethane foam blocks in the mattresses industries. For the application of PERT/CPM technique in the project of Horizontal Laminator production were identified the activities that compose the project, the dependence between them, the normal and accelerated durations and the normal and accelerated costs. In this study, deterministic estimates for the duration of the activities were considered. The results show that the project can be completed in 520 hours at a total cost of R$7,042.50, when all activities are performed in their normal durations.  When all the activities that compose the critical path are accelerated, the project can be completed in 333.3 hours at a total cost of R$9,263.01. If the activities slacks have been exploited, it can obtain a final total cost of R$6,157.8, without changing the new duration of the project. It is noteworthy that the final total cost of the project if the slacks are used, will be lower than the initial cost. Regarding the initial cost of the project, after the application of the PERT/CPM technique, it presents a decrease of 12.56% of the total project cost.

  8. Higher Education

    African Journals Online (AJOL)

    Kunle Amuwo: Higher Education Transformation: A Paradigm Shilt in South Africa? ... ty of such skills, especially at the middle management levels within the higher ... istics and virtues of differentiation and diversity. .... may be forced to close shop for lack of capacity to attract ..... necessarily lead to racial and gender equity,.

  9. Rational and timely haemostatic interventions following cardiac surgery - coagulation factor concentrates or blood bank products.

    Science.gov (United States)

    Tang, Mariann; Fenger-Eriksen, Christian; Wierup, Per; Greisen, Jacob; Ingerslev, Jørgen; Hjortdal, Vibeke; Sørensen, Benny

    2017-06-01

    Cardiac surgery may cause a serious coagulopathy leading to increased risk of bleeding and transfusion demands. Blood bank products are commonly first line haemostatic intervention, but has been associated with hazardous side effect. Coagulation factor concentrates may be a more efficient, predictable, and potentially a safer treatment, although prospective clinical trials are needed to further explore these hypotheses. This study investigated the haemostatic potential of ex vivo supplementation of coagulation factor concentrates versus blood bank products on blood samples drawn from patients undergoing cardiac surgery. 30 adults were prospectively enrolled (mean age=63.9, females=27%). Ex vivo haemostatic interventions (monotherapy or combinations) were performed in whole blood taken immediately after surgery and two hours postoperatively. Fresh-frozen plasma, platelets, cryoprecipitate, fibrinogen concentrate, prothrombin complex concentrate (PCC), and recombinant FVIIa (rFVIIa) were investigated. The haemostatic effect was evaluated using whole blood thromboelastometry parameters, as well as by thrombin generation. Immediately after surgery the compromised maximum clot firmness was corrected by monotherapy with fibrinogen or platelets or combination therapy with fibrinogen. At two hours postoperatively the coagulation profile was further deranged as illustrated by a prolonged clotting time, a reduced maximum velocity and further diminished maximum clot firmness. The thrombin lagtime was progressively prolonged and both peak thrombin and endogenous thrombin potential were compromised. No monotherapy effectively corrected all haemostatic abnormalities. The most effective combinations were: fibrinogen+rFVIIa or fibrinogen+PCC. Blood bank products were not as effective in the correction of the coagulopathy. Coagulation factor concentrates appear to provide a more optimal haemostasis profile following cardiac surgery compared to blood bank products. Copyright © 2017

  10. Evaluation of a reduced centrifugation time and higher centrifugal force on various general chemistry and immunochemistry analytes in plasma and serum.

    Science.gov (United States)

    Møller, Mette F; Søndergaard, Tove R; Kristensen, Helle T; Münster, Anna-Marie B

    2017-09-01

    Background Centrifugation of blood samples is an essential preanalytical step in the clinical biochemistry laboratory. Centrifugation settings are often altered to optimize sample flow and turnaround time. Few studies have addressed the effect of altering centrifugation settings on analytical quality, and almost all studies have been done using collection tubes with gel separator. Methods In this study, we compared a centrifugation time of 5 min at 3000 ×  g to a standard protocol of 10 min at 2200 ×  g. Nine selected general chemistry and immunochemistry analytes and interference indices were studied in lithium heparin plasma tubes and serum tubes without gel separator. Results were evaluated using mean bias, difference plots and coefficient of variation, compared with maximum allowable bias and coefficient of variation used in laboratory routine quality control. Results For all analytes except lactate dehydrogenase, the results were within the predefined acceptance criteria, indicating that the analytical quality was not compromised. Lactate dehydrogenase showed higher values after centrifugation for 5 min at 3000 ×  g, mean bias was 6.3 ± 2.2% and the coefficient of variation was 5%. Conclusions We found that a centrifugation protocol of 5 min at 3000 ×  g can be used for the general chemistry and immunochemistry analytes studied, with the possible exception of lactate dehydrogenase, which requires further assessment.

  11. Product evolution: how new (types of) products come about & develop over time into families of advanced versions

    NARCIS (Netherlands)

    Ehlhardt, Huub

    2016-01-01

    This thesis presents a Theory of Product Evolution which builds on the work of many scholars who have described evolutionary patterns in innovation processes. It challenges the popular notion that we owe the availability of products solely to genius inventors. Instead arguments are presented to show

  12. Time-dependent depletion of nitrite in pork/beef and chicken meat products and its effect on nitrite intake estimation

    Science.gov (United States)

    Merino, Leonardo; Darnerud, Per Ola; Toldrá, Fidel; Ilbäck, Nils-Gunnar

    2016-01-01

    ABSTRACT The food additive nitrite (E249, E250) is commonly used in meat curing as a food preservation method. Because of potential negative health effects of nitrite, its use is strictly regulated. In an earlier study we have shown that the calculated intake of nitrite in children can exceed the acceptable daily intake (ADI) when conversion from dietary nitrate to nitrite is included. This study examined time-dependent changes in nitrite levels in four Swedish meat products frequently eaten by children: pork/beef sausage, liver paté and two types of chicken sausage, and how the production process, storage and also boiling (e.g., simmering in salted water) and frying affect the initial added nitrite level. The results showed a steep decrease in nitrite level between the point of addition to the product and the first sampling of the product 24 h later. After this time, residual nitrite levels continued to decrease, but much more slowly, until the recommended use-by date. Interestingly, this continuing decrease in nitrite was much smaller in the chicken products than in the pork/beef products. In a pilot study on pork/beef sausage, we found no effects of boiling on residual nitrite levels, but frying decreased nitrite levels by 50%. In scenarios of time-dependent depletion of nitrite using the data obtained for sausages to represent all cured meat products and including conversion from dietary nitrate, calculated nitrite intake in 4-year-old children generally exceeded the ADI. Moreover, the actual intake of nitrite from cured meat is dependent on the type of meat source, with a higher residual nitrite levels in chicken products compared with pork/beef products. This may result in increased nitrite exposure among consumers shifting their consumption pattern of processed meats from red to white meat products. PMID:26743589

  13. Higher plasma levels of advanced glycation end products are associated with incident cardiovascular disease and all-cause mortality in type 1 diabetes

    DEFF Research Database (Denmark)

    Nin, Johanna W; Jorsal, Anders; Ferreira, Isabel

    2011-01-01

    -grade inflammation, and arterial stiffness. RESEARCH DESIGN AND METHODS: We prospectively followed 169 individuals with diabetic nephropathy and 170 individuals with persistent normoalbuminuria who were free of CVD at study entry and in whom levels of N(ε)-(carboxymethyl)lysine, N(ε)-(carboxyethyl)lysine......OBJECTIVE: To investigate the associations of plasma levels of advanced glycation end products (AGEs) with incident cardiovascular disease (CVD) and all-cause mortality in type 1 diabetes and the extent to which any such associations could be explained by endothelial and renal dysfunction, low...... or endothelial dysfunction, low-grade inflammation, or arterial stiffness. CONCLUSIONS: Higher levels of AGEs are associated with incident fatal and nonfatal CVD as well as all-cause mortality in individuals with type 1 diabetes, independently of other risk factors and of several potential AGEs...

  14. Time Biases in laser ranging measurements; impacts on geodetic products (Reference Frame and Orbitography)

    Science.gov (United States)

    Belli, A.; Exertier, P.; Lemoine, F. G.; Chinn, D. S.; Zelensky, N. P.

    2017-12-01

    The GGOS objectives are to maintain a geodetic network with an accuracy of 1 mm and a stability of 0.1 mm per year. For years, the laser ranging technique, which provide very accurate absolute distances to geodetic targets enable to determine the scale factor as well as coordinates of the geocenter. In order to achieve this goal, systematic errors appearing in the laser ranging measurements must be considered and solved. In addition to Range Bias (RB), which is the primary source of uncertainty of the technique, Time Bias (TB) has been recently detected by using the Time Transfer by Laser Link (T2L2) space instrument capability on-board the satellite Jason-2. Instead of determining TB through the precise orbit determination that is applied to commonly used geodetic targets like LAGEOS to estimate global geodetic products, we have developed, independently, a dedicated method to transfer time between remote satellite laser ranging stations. As a result, the evolving clock phase shift to UTC of around 30 stations has been determined under the form of time series of time bias per station from 2008 to 2016 with an accuracy of 3-4 ns. It demonstrated the difficulty, in terms of Time & Frequency used technologies, to locally maintain accuracy and long term stability at least in the range of 100 ns that is the current requirement for time measurements (UTC) for the laser ranging technique. Because some laser ranging stations oftently exceed this limit (from 100 ns to a few μs) we have been studying these effects first on the precision orbit determination itself, second on the station positioning. We discuss the impact of TB on LAGEOS and Jason-2 orbits, which appears to affect the along-track component essentially. We also investigate the role of TB in global geodetic parameters as the station coordinates. Finally, we propose to provide the community with time series of time bias of laser ranging stations, under the form of a data- handling-file in order to be included in

  15. Restricting access time at pasture and time of grazing allocation for Holstein dairy cows: Ingestive behaviour, dry matter intake and milk production

    NARCIS (Netherlands)

    Mattiauda, D.A.; Tamminga, S.; Gibb, M.J.; Soca, P.; Bentancur, O.; Chilibroste, P.

    2013-01-01

    The objective of this study was to assess the effects of restricting access time to pasture and time of grazing allocation on grazing behaviour, daily dry matter intake (DMI), rumen fermentation, milk production and composition in dairy cows. Twenty-one autumn-calving Holstein cows were assigned to

  16. Respiratory syncytial virus infection induces higher Toll-like receptor-3 expression and TNF-α production than human metapneumovirus infection.

    Directory of Open Access Journals (Sweden)

    Ying Dou

    Full Text Available Respiratory syncytial virus (RSV and human metapneumovirus (hMPV are common causes of respiratory infections in children. Diseases caused by hMPV are generally considered to be less severe than those caused by RSV; the underlying mechanisms, however, remain unknown. In the present study, the expressions of TLRs in airway epithelial cells and lungs of BALB/c mice infected by hMPV or RSV were measured in an attempt to explore the differences in the airway inflammation caused by the two viruses. Our results demonstrate that both hMPV and RSV infection upregulated the expressions of TLRs and inflammatory cytokines. Specifically, the TLR3 expression was revealed to be elevated in vitro and in mouse lungs. IFN-α produced by A549 cells after RSV or hMPV infection remained undistinguishable, whereas production of TNF-α was significantly higher after RSV infection than hMPV infection either in the presence or absence of Poly I:C. This study provides a clue that more severe clinical syndrome of RSV infection may be due to the greater magnitude of induction of airway inflammation by RSV involving TLR3 activation and production of TNF-α.

  17. Higher production of C-phycocyanin by nitrogen-free (diazotrophic) cultivation of Nostoc sp. NK and simplified extraction by dark-cold shock.

    Science.gov (United States)

    Lee, Na Kyeong; Oh, Hee-Mock; Kim, Hee-Sik; Ahn, Chi-Yong

    2017-03-01

    Nostoc sp. NK (KCTC 12772BP) was isolated and cultivated in a BG11 medium and a nitrate-free BG11 medium (BG11 0 ). To enhance C-phycocyanin (C-PC) content in the cells, different fluorescent lamps (white, plant, and red) were used as light sources for complementary chromatic adaptation (CCA). The maximum biomass productivity was 0.42g/L/d and 0.32g/L/d under BG11 and BG11 0 conditions, respectively. The maximum C-PC contents were 8.4% (w/w) under white lamps, 13.6% (w/w) under plant lamps, and 18% (w/w) under BG11 0 and the red light condition. The maximum C-PC productivity was 57.4mg/L/d in BG11 0 under the red lamp condition. These results indicate that a higher C-PC content could be obtained under a diazotrophic condition and a CCA reaction. The C-PC could be released naturally from cells without any extraction processes, when Nostoc sp. NK was cultivated in the BG11 0 medium with CO 2 aeration and put in dark conditions at 5°C. Copyright © 2016 Elsevier Ltd. All rights reserved.

  18. The effect of increased branched-chain amino acid transaminase activity in yeast on the production of higher alcohols and on the flavour profiles of wine and distillates.

    Science.gov (United States)

    Lilly, Mariska; Bauer, Florian F; Styger, Gustav; Lambrechts, Marius G; Pretorius, Isak S

    2006-08-01

    In Saccharomyces cerevisiae, branched-chain amino acid transaminases (BCAATases) are encoded by the BAT1 and BAT2 genes. BCAATases catalyse the transfer of amino groups between those amino acids and alpha-keto-acids. alpha-Keto-acids are precursors for the biosynthesis of higher alcohols, which significantly influence the aroma and flavour of yeast-derived fermentation products. The objective of this study was to investigate the influence of BAT-gene expression on general yeast physiology, on aroma and flavour compound formation and on the sensory characteristics of wines and distillates. For this purpose, the genes were overexpressed and deleted in a laboratory strain, BY4742, and overexpressed in an industrial wine yeast strain, VIN13. The data show that, with the exception of a slow growth phenotype observed for the BAT1 deletion strain, the fermentation behaviour of the strains was unaffected by the modifications. The chemical and sensory analysis of fermentation products revealed a strong correction between BAT gene expression and the formation of many aroma compounds. The data suggest that the adjustment of BAT gene expression could play an important role in assisting winemakers in their endeavour to produce wines with specific flavour profiles.

  19. Early lactate clearance in septic patients with elevated lactate levels admitted from the emergency department to intensive care: time to aim higher?

    Science.gov (United States)

    Walker, Craig A; Griffith, David M; Gray, Alasdair J; Datta, Deepankar; Hay, Alasdair W

    2013-10-01

    Septic patients with hyperlactatemia have increased mortality rates, irrespective of hemodynamic and oxygen-derived variables. The aims of the study are the following: (1) to ascertain whether lactate clearance (LC) (percentage change in lactate over unit time) predicts mortality in septic patients admitted to intensive care directly from the emergency department and (2) to calculate the optimal "cut-off" value for mortality prediction. Three-year retrospective observational study of consecutive patients with severe sepsis and septic shock admitted to intensive care from the emergency department of a tertiary UK hospital. We calculated 6-hour LC, performed receiver operating characteristic analyses to calculate optimal cut-off values for initial lactate and LC, dichotomized patients according to the LC cut-off, and calculated hazard ratios using a Cox proportional hazards model. One hundred six patients were identified; 78, after exclusions. Lactate clearance was independently associated with 30-day mortality (P<.04); optimal cut-off, 36%. Mortality rates were 61.1% and 10.7% for patients with 6-hour LC 36% or less and greater than 36%, respectively. Hazard ratio for death with LC 36% or less was 7.33 (95% confidence interval, 2.17-24.73; P<.001). Six-hour LC was independently associated with mortality, and the optimal cut-off value was 36%, significantly higher than previously reported. We would support further research investigating this higher LC as a distinct resuscitation end point in patients with severe sepsis and septic shock. Copyright © 2013 Elsevier Inc. All rights reserved.

  20. Real-Time Data Processing Systems and Products at the Alaska Earthquake Information Center

    Science.gov (United States)

    Ruppert, N. A.; Hansen, R. A.

    2007-05-01

    The Alaska Earthquake Information Center (AEIC) receives data from over 400 seismic sites located within the state boundaries and the surrounding regions and serves as a regional data center. In 2007, the AEIC reported ~20,000 seismic events, with the largest event of M6.6 in Andreanof Islands. The real-time earthquake detection and data processing systems at AEIC are based on the Antelope system from BRTT, Inc. This modular and extensible processing platform allows an integrated system complete from data acquisition to catalog production. Multiple additional modules constructed with the Antelope toolbox have been developed to fit particular needs of the AEIC. The real-time earthquake locations and magnitudes are determined within 2-5 minutes of the event occurrence. AEIC maintains a 24/7 seismologist-on-duty schedule. Earthquake alarms are based on the real- time earthquake detections. Significant events are reviewed by the seismologist on duty within 30 minutes of the occurrence with information releases issued for significant events. This information is disseminated immediately via the AEIC website, ANSS website via QDDS submissions, through e-mail, cell phone and pager notifications, via fax broadcasts and recorded voice-mail messages. In addition, automatic regional moment tensors are determined for events with M>=4.0. This information is posted on the public website. ShakeMaps are being calculated in real-time with the information currently accessible via a password-protected website. AEIC is designing an alarm system targeted for the critical lifeline operations in Alaska. AEIC maintains an extensive computer network to provide adequate support for data processing and archival. For real-time processing, AEIC operates two identical, interoperable computer systems in parallel.