WorldWideScience

Sample records for time solvent consumption

  1. Solvent sorting in (mixed solvent electrolyte) systems: Time-resolved ...

    Indian Academy of Sciences (India)

    lar solvents as an effective single component dipo- lar liquid that is characterized ... and time (t) dependent solvation energy of mobile dipo- lar solute with density ..... Even though this way for modification of C is purely ad- hoc, the observation ...

  2. Accelerated solvent extraction (ASE) - a fast and automated technique with low solvent consumption for the extraction of solid samples (T12)

    International Nuclear Information System (INIS)

    Hoefler, F.

    2002-01-01

    Full text: Accelerated solvent extraction (ASE) is a modern extraction technique that significantly streamlines sample preparation. A common organic solvent as well as water is used as extraction solvent at elevated temperature and pressure to increase extraction speed and efficiency. The entire extraction process is fully automated and performed within 15 minutes with a solvent consumption of 18 ml for a 10 g sample. For many matrices and for a variety of solutes, ASE has proven to be equivalent or superior to sonication, Soxhlet, and reflux extraction techniques while requiring less time, solvent and labor. First ASE has been applied for the extraction of environmental hazards from solid matrices. Within a very short time ASE was approved by the U.S. EPA for the extraction of BNAs, PAHs, PCBs, pesticides, herbicides, TPH, and dioxins from solid samples in method 3545. Especially for the extraction of dioxins the extraction time with ASE is reduced to 20 minutes in comparison to 18 h using Soxhlet. In food analysis ASE is used for the extraction of pesticide and mycotoxin residues from fruits and vegetables, the fat determination and extraction of vitamins. Time consuming and solvent intensive methods for the extraction of additives from polymers as well as for the extraction of marker compounds from herbal supplements can be performed with higher efficiencies using ASE. For the analysis of chemical weapons the extraction process and sample clean-up including derivatization can be automated and combined with GC-MS using an online ASE-APEC-GC system. (author)

  3. Solvent consumption in non-catalytic alcohol solvolysis of biorefinery lignin

    DEFF Research Database (Denmark)

    Nielsen, J. B.; Jensen, A.; Schandel, Christian Bækhøj

    2017-01-01

    Lignin solvolysis in supercritical alcohols provides a method for producing a deoxygenated liquid bio-oil. Solvent consumption is however inevitable and due to the high cost of alcohols, relative to a bio-oil product, it can hinder commercial viability. In order to investigate the reactions...... of solvent consumption we studied solvolysis of biorefinery lignin in several primary alcohols. Lignin solvolysis in methanol, ethanol, 1-propanol and 1-butanol performed similarly with respect to bio-oil composition; however, methanol gave much lower bio-oil yield. Solvent consumption increases...... with reaction temperature for all alcohols and from 10 wt% at 300 °C to 35 wt% at 400 °C when using ethanol. The mechanism for solvent consumption was found mainly to take place through three different reactions: direct decomposition to gas through decarbonylation, formation of light condensation products...

  4. Ultrasound-Assisted Extraction: Effect of Extraction Time and Solvent ...

    African Journals Online (AJOL)

    Purpose: To investigate the influence of extraction conditions assisted by ultrasound on the quality of extracts obtained from Mesembryanthemum edule shoots. Methods: The extraction procedure was carried out in an ultrasonic bath. The effect of two solvents (methanol and ethanol) and two extraction times (5 and 10 min) ...

  5. In-tube electro-membrane extraction with a sub-microliter organic solvent consumption as an efficient technique for synthetic food dyes determination in foodstuff samples.

    Science.gov (United States)

    Bazregar, Mohammad; Rajabi, Maryam; Yamini, Yadollah; Asghari, Alireza; Abdossalami asl, Yousef

    2015-09-04

    A simple and efficient extraction technique with a sub-microliter organic solvent consumption termed as in-tube electro-membrane extraction (IEME) is introduced. This method is based upon the electro-kinetic migration of ionized compounds by the application of an electrical potential difference. For this purpose, a thin polypropylene (PP) sheet placed inside a tube acts as a support for the membrane solvent, and 30μL of an aqueous acceptor solution is separated by this solvent from 1.2mL of an aqueous donor solution. This method yielded high extraction recoveries (63-81%), and the consumption of the organic solvent used was only 0.5μL. By performing this method, the purification is high, and the utilization of the organic solvent, used as a mediator, is very simple and repeatable. The proposed method was evaluated by extraction of four synthetic food dyes (Amaranth, Ponceau 4R, Allura Red, and Carmoisine) as the model analytes. Optimization of variables affecting the method was carried out in order to achieve the best extraction efficiency. These variables were the type of membrane solvent, applied extraction voltage, extraction time, pH range, and concentration of salt added. Under the optimized conditions, IEME-HPLC-UV provided a good linearity in the range of 1.00-800ngmL(-1), low limits of detection (0.3-1ngmL(-1)), and good extraction repeatabilities (RSDs below 5.2%, n=5). It seems that this design is a proper one for the automation of the method. Also the consumption of the organic solvent in a sub-microliter scale, and its simplicity, high efficiency, and high purification can help one getting closer to the objectives of the green chemistry. Copyright © 2015 Elsevier B.V. All rights reserved.

  6. The proper time for antioxidant consumption.

    Science.gov (United States)

    Beaulieu, Michaël; Schaefer, H Martin

    2014-04-10

    Consuming food rich in antioxidants may help organisms to increase their antioxidant defences and avoid oxidative damage. Under the hypothesis that organisms actively consume food for its antioxidant properties, they would need to do so in view of other physiological requirements, such as energy requirements. Here, we observed that Gouldian finches (Erythrura gouldiae) consumed most seeds rich in antioxidants in the middle of the day, while their consumption of staple seeds more profitable in energy intake (and poor in antioxidants) was maximal in the morning and the evening. This consumption of seeds rich in antioxidants in the middle of the day may be explicable (1) because birds took advantage of a time window associated with relaxed energy requirements to ingest antioxidant resources, or (2) because birds consumed antioxidant resources as a response to the highest antioxidant requirements in the middle of the day. If the latter hypothesis holds true, having the possibility to ingest antioxidants should be most beneficial in terms of oxidative balance in the middle of the day. Even though feeding on seeds rich in antioxidants improved Gouldian finches' overall antioxidant capacity, we did not detect any diurnal effect of antioxidant intake on plasma oxidative markers (as measured by the d-ROM and the OXY-adsorbent tests). This indicates that the diurnal pattern of antioxidant intake that we observed was most likely constrained by the high consumption of staple food to replenish or build up body reserves in the morning and in the evening, and not primarily determined by elevated antioxidant requirements in the middle of the day. Consequently, animals appear to have the possibility to increase antioxidant defences by selecting food rich in antioxidants, only when energetic constraints are relaxed. Copyright © 2014 Elsevier Inc. All rights reserved.

  7. Watching the Solvation of Atoms in Liquids One Solvent Molecule at a Time

    Science.gov (United States)

    Bragg, Arthur E.; Glover, William J.; Schwartz, Benjamin J.

    2010-06-01

    We use mixed quantum-classical molecular dynamics simulations and ultrafast transient hole-burning spectroscopy to build a molecular-level picture of the motions of solvent molecules around Na atoms in liquid tetrahydrofuran. We find that even at room temperature, the solvation of Na atoms occurs in discrete steps, with the number of solvent molecules nearest the atom changing one at a time. This explains why the rate of solvent relaxation differs for different initial nonequilibrium states, and reveals how the solvent helps determine the identity of atomic species in liquids.

  8. Effect of Coating Solvent Ratio on the Drug Release Lag Time of ...

    African Journals Online (AJOL)

    Erah

    Research Article ... Lag Time of Coated Theophylline Osmotic Tablets ... Key words: Coating solvent, Drug release, Lag time, Osmotic tablet, HPMC, .... following composition (w/w): theophylline ... tablets was measured by UV absorption.

  9. Poverty index with time-varying consumption and income distributions

    Science.gov (United States)

    Chattopadhyay, Amit K.; Kumar, T. Krishna; Mallick, Sushanta K.

    2017-03-01

    Starting from a stochastic agent-based model to represent market exchange in a developing economy, we study time variations of the probability density function of income with simultaneous variation of the consumption deprivation (CD), where CD represents the shortfall in consumption from the saturation level of an essential commodity, cereal. Together, these two models combine income-expenditure-based market dynamics with time variations in consumption due to income. In this new unified theoretical structure, exchange of trade in assets is only allowed when the income exceeds consumption-deprivation while CD itself is endogenously obtained from a separate kinetic model. Our results reveal that the nature of time variation of the CD function leads to a downward trend in the threshold level of consumption of basic necessities, suggesting a possible dietary transition in terms of lower saturation level of food-grain consumption, possibly through an improvement in the level of living. The new poverty index, defined as CD, is amenable to approximate probabilistic prediction within a short time horizon. A major achievement of this work is the intrinsic independence of the poverty index from an exogenous poverty line, making it more objective for policy formulation as opposed to existing poverty indices in the literature.

  10. Consumption growth and time-varying expected stock returns

    DEFF Research Database (Denmark)

    Vinther Møller, Stig

    2008-01-01

    When the consumption growth rate is measured based upon fourth quarter data, it tracks predictable variation in future excess stock returns. Low fourth quarter consumption growth rates predict high future excess stock returns such that expected returns are high at business cycle troughs and low...... of each calendar year, and at possibly random times in between. The consumption growth rate measured based upon fourth quarter data is a much stronger predictive variable than benchmark predictive variables such as the dividend-price ratio, the term spread, and the default spread....

  11. Time-resolved Femtosecond Photon Echo Probes Bimodal Solvent Dynamics

    NARCIS (Netherlands)

    Pshenichnikov, M.S; Duppen, K.; Wiersma, D. A.

    1995-01-01

    We report on time-resolved femtosecond photon echo experiments of a dye molecule in a polar solution. The photon echo is time resolved by mixing the echo with a femtosecond gate pulse in a nonlinear crystal. It is shown that the temporal profile of the photon echo allows separation of the

  12. Effects of solvent evaporation time on immediate adhesive properties of universal adhesives to dentin.

    Science.gov (United States)

    Luque-Martinez, Issis V; Perdigão, Jorge; Muñoz, Miguel A; Sezinando, Ana; Reis, Alessandra; Loguercio, Alessandro D

    2014-10-01

    To evaluate the microtensile bond strengths (μTBS) and nanoleakage (NL) of three universal or multi-mode adhesives, applied with increasing solvent evaporation times. One-hundred and forty caries-free extracted third molars were divided into 20 groups for bond strength testing, according to three factors: (1) Adhesive - All-Bond Universal (ABU, Bisco, Inc.), Prime&Bond Elect (PBE, Dentsply), and Scotchbond Universal Adhesive (SBU, 3M ESPE); (2) Bonding strategy - self-etch (SE) or etch-and-rinse (ER); and (3) Adhesive solvent evaporation time - 5s, 15s, and 25s. Two extra groups were prepared with ABU because the respective manufacturer recommends a solvent evaporation time of 10s. After restorations were constructed, specimens were stored in water (37°C/24h). Resin-dentin beams (0.8mm(2)) were tested at 0.5mm/min (μTBS). For NL, forty extracted molars were randomly assigned to each of the 20 groups. Dentin disks were restored, immersed in ammoniacal silver nitrate, sectioned and processed for evaluation under a FESEM in backscattered mode. Data from μTBS were analyzed using two-way ANOVA (adhesive vs. drying time) for each strategy, and Tukey's test (α=0.05). NL data were computed with non-parametric tests (Kruskal-Wallis and Mann-Whitney tests, α=0.05). Increasing solvent evaporation time from 5s to 25s resulted in statistically higher mean μTBS for all adhesives when used in ER mode. Regarding NL, ER resulted in greater NL than SE for each of the evaporation times regardless of the adhesive used. A solvent evaporation time of 25s resulted in the lowest NL for SBU-ER. Residual water and/or solvent may compromise the performance of universal adhesives, which may be improved with extended evaporation times. Copyright © 2014 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

  13. Moderate alcohol consumption and waiting time to pregnancy

    DEFF Research Database (Denmark)

    Juhl, Mette; Andersen, Anne-Marie Nybo; Grønbaek, Morten

    2001-01-01

    BACKGROUND: Recent research indicates that even a moderate consumption of alcohol in women trying to become pregnant is associated with longer waiting time to pregnancy. The findings, though, are based upon few observations. METHODS: Self-reported data on alcohol intake and waiting time to pregna...

  14. Nonadiabatic dynamics of electron transfer in solution: Explicit and implicit solvent treatments that include multiple relaxation time scales

    International Nuclear Information System (INIS)

    Schwerdtfeger, Christine A.; Soudackov, Alexander V.; Hammes-Schiffer, Sharon

    2014-01-01

    The development of efficient theoretical methods for describing electron transfer (ET) reactions in condensed phases is important for a variety of chemical and biological applications. Previously, dynamical dielectric continuum theory was used to derive Langevin equations for a single collective solvent coordinate describing ET in a polar solvent. In this theory, the parameters are directly related to the physical properties of the system and can be determined from experimental data or explicit molecular dynamics simulations. Herein, we combine these Langevin equations with surface hopping nonadiabatic dynamics methods to calculate the rate constants for thermal ET reactions in polar solvents for a wide range of electronic couplings and reaction free energies. Comparison of explicit and implicit solvent calculations illustrates that the mapping from explicit to implicit solvent models is valid even for solvents exhibiting complex relaxation behavior with multiple relaxation time scales and a short-time inertial response. The rate constants calculated for implicit solvent models with a single solvent relaxation time scale corresponding to water, acetonitrile, and methanol agree well with analytical theories in the Golden rule and solvent-controlled regimes, as well as in the intermediate regime. The implicit solvent models with two relaxation time scales are in qualitative agreement with the analytical theories but quantitatively overestimate the rate constants compared to these theories. Analysis of these simulations elucidates the importance of multiple relaxation time scales and the inertial component of the solvent response, as well as potential shortcomings of the analytical theories based on single time scale solvent relaxation models. This implicit solvent approach will enable the simulation of a wide range of ET reactions via the stochastic dynamics of a single collective solvent coordinate with parameters that are relevant to experimentally accessible

  15. Impact of daylight saving time on the Chilean residential consumption

    International Nuclear Information System (INIS)

    Verdejo, Humberto; Becker, Cristhian; Echiburu, Diego; Escudero, William; Fucks, Emiliano

    2016-01-01

    Since 1970 Chile has had a Daylight Saving Time (DST) policy in order to reduce residential electricity consumption in the country. The time change was set for the first time by executive decree in 1970, and since that date it was applied every year without great changes until 2010. Since then, and to date, decrees have been set in order to increase the duration of the DST, arguing that there are reasons associated with energy savings that justify the extension of the measure that has been adopted by the authority in recent years. In the present study the impact of the application of DST in terms of decreased household electricity consumption is analyzed using two complementary methods, one based on a heuristic approach and the other using an econometric model. The results indicate that there is indeed a marginally small reduction in residential electricity consumption, although these results are not homogeneous throughout the country. - Highlights: • The impact of the application of DST is analyzed in Chilean distribution networks. • The results indicate that there is indeed a marginally small reduction in residential electricity consumption. • A total energy reduction is estimated based on the proposed methodology.

  16. Effect of Coating Solvent Ratio on the Drug Release Lag Time of ...

    African Journals Online (AJOL)

    Purpose: The aim of the study was to investigate the effect of hydro-alcohol coating solvent ratio on the surface texture and lag time of porous theophylline osmotic tablet. Methods: Porous theophylline osmotic pump tablets were formulated by direct compression and coated by spraying with varying ratios of water-alcohol ...

  17. Junk food consumption and screen time: association with childhood adiposity.

    Science.gov (United States)

    Montoye, Alexander H; Pfeiffer, Karin A; Alaimo, Katherine; Betz, Heather Hayes; Paek, Hye-Jin; Carlson, Joseph J; Eisenmann, Joey C

    2013-05-01

    To determine the joint association of junk food consumption (JFC) and screen time (ST) with adiposity in children. Two hundred fourteen (121 girls, 93 boys) third-to-fifth-grade students (54% Hispanic, 35% African American, 8% white) completed a lifestyle behavior survey, which included self-reported JFC and ST, as part of a school-based lifestyle intervention program. Neither JFC nor ST, independently or jointly, was associated with adiposity measures. JFC and ST were significantly correlated (r = .375). The low achievement of physical activity and screen time recommendations and high prevalence of overweight/obesity in this mostly minority, low socioeconomic status population indicates a potential focus for intervention.

  18. Solvent extraction

    Energy Technology Data Exchange (ETDEWEB)

    Coombs, D.M.; Latimer, E.G.

    1988-01-05

    It is an object of this invention to provide for the demetallization and general upgrading of heavy oil via a solvent extracton process, and to improve the efficiency of solvent extraction operations. The yield and demetallization of product oil form heavy high-metal content oil is maximized by solvent extractions which employ either or all of the following techniques: premixing of a minor amount of the solvent with feed and using countercurrent flow for the remaining solvent; use of certain solvent/free ratios; use of segmental baffle tray extraction column internals and the proper extraction column residence time. The solvent premix/countercurrent flow feature of the invention substantially improves extractions where temperatures and pressures above the critical point of the solvent are used. By using this technique, a greater yield of extract oil can be obtained at the same metals content or a lower metals-containing extract oil product can be obtained at the same yield. Furthermore, the premixing of part of the solvent with the feed before countercurrent extraction gives high extract oil yields and high quality demetallization. The solvent/feed ratio features of the invention substanially lower the captial and operating costs for such processes while not suffering a loss in selectivity for metals rejection. The column internals and rsidence time features of the invention further improve the extractor metals rejection at a constant yield or allow for an increase in extract oil yield at a constant extract oil metals content. 13 figs., 3 tabs.

  19. Moderate alcohol consumption and waiting time to pregnancy

    DEFF Research Database (Denmark)

    Juhl, Mette; Andersen, Anne-Marie Nybo; Grønbæk, Morten

    2001-01-01

    BACKGROUND: Recent research indicates that even a moderate consumption of alcohol in women trying to become pregnant is associated with longer waiting time to pregnancy. The findings, though, are based upon few observations. METHODS: Self-reported data on alcohol intake and waiting time...... to pregnancy (0-2, 3-5, 6-12 and >12 months) was used for 39 612 pregnant women, recruited to the Danish National Birth Cohort within the first 24 weeks of pregnancy from 1997 to 2000. Main outcome measures were odds ratios (OR) for a prolonged waiting time to pregnancy according to alcohol intake. RESULTS......: In nulliparous women neither moderate nor high alcohol intake was related with longer waiting time to pregnancy compared with a low intake. In parous women, a modest association was seen only among those with an intake of >14 drinks per week (subfecundity OR 1.3; 95% confidence interval 1.0-1.7). Women who...

  20. Consumption and Savings of First Time House Owners

    DEFF Research Database (Denmark)

    Ejarque, João; Leth-Petersen, Søren

    We characterize savings behavior around the point of the first house purchase. Using a panel data set with income and wealth information on Danish first-time house owners we document that households save for the down payment, mortgage to the limit, run down liquid assets at purchase, and adjust...... to adverse income shocks occurring just after the purchase by reducing consumption. We build a model that replicates these observations, show that the preference parameters are identified from the data, and estimate them. Based on the estimated model house buying significantly reduces the ability to smooth...

  1. Real-time ESI-MS of enzymatic conversion: impact of organic solvents and multiplexing.

    Science.gov (United States)

    Scheerle, Romy K; Grassmann, Johanna; Letzel, Thomas

    2012-01-01

    Different enzymatic assays were characterized systematically by real-time electrospray ionization mass spectrometry (ESI-MS) in the presence of organic solvents as well as in multiplex approaches and in a combination of both. Typically, biological enzymatic reactions are studied in aqueous solutions, since most enzymes show their full activity solely in aqueous solutions. However, in recent years, the use of organic solvents in combination with enzymatic reactions has gained increasing interest due to biotechnological advantages in chemical synthesis, development of online coupled setups screening for enzyme regulatory compounds, advantages regarding mass spectrometric detection and others. In the current study, the influence of several common organic solvents (methanol, ethanol, isopropanol, acetone, acetonitrile) on enzymatic activity (hen egg white lysozyme, chitinase, α-chymotrypsin, elastase from human neutrophils and porcine pancreas, acetylcholinesterase) was tested. Moreover, multiplexing is a promising approach enabling fast and cost-efficient screening methods, e.g. for determination of inhibitors in complex mixtures or in the field of biomedical research. Although in multiplexed setups the enzymatic activity may be affected by the presence of other substrates and/or enzymes, the expected advantages possibly will predominate. To investigate those effects, we measured multiple enzymatic assays simultaneously. For all conducted measurements, the conversion rate of the substrate(s) was calculated, which reflects the enzymatic activity. The results provide an overview about the susceptibility of the selected enzymes towards diverse factors and a reference point for many applications in analytical chemistry and biotechnology.

  2. Consumption Behavior of Middle Strata in Times of Economic Crisis

    Directory of Open Access Journals (Sweden)

    Svetlana V. Mareeva

    2017-03-01

    Full Text Available Based on the data of national representative surveys carried out by IS RAS in 2014-2016, the author presents analysis of consumption specifics in middle-income groups in times of current economic crisis. It is shown that although in modern Russian society middle income groups make up the majority of population, they cannot be directly correlated with the middle class defined in class theory framework. Middle-income groups are heterogeneous in different aspects, including their consumption specifics. Their standard of living remains quite modest, although it is significantly higher than the “survival standard”. New economic conditions led to widespread economy practices among them - primarily on consumption, followed by economy on hobbies and vacations. Economy practices also seriously affected middle-income strata investments in human capital – usage of paid educational and health services (this type of economy was more widespread among lower middle-income group than higher. Although representatives of the middle-income strata are quite actively using paid medical services (and relatively rarely – paid educational services, the reason for this more often lies in inaccessibility of free analogues rather than in search for the higher quality. Process of durables renewal in middle strata during the crisis was not as active, but their standard set of durable goods still widened over the past two years - primarily due to the relatively complex technological durables that they are gradually transferred from the category of innovation goods to the extended standard. In this regard, the upper middle income group successfully performs the function of the innovative consumer.

  3. Cross-sectional consumption-based asset pricing: The importance of consumption timing and the inclusion of severe crises

    DEFF Research Database (Denmark)

    Engsted, Tom; Møller, Stig Vinther

    By using a beginning-of-period timing convention for consumption, and by including the Great Depression years in the analysis, we show that on annual data from 1926 to 2009 a standard contemporaneous consumption risk model goes a long way in explaining the size and value premiums in cross......-sectional data that include both the Fama-French portfolios and industry portfolios. A long run consumption risk variant of the model also produces a high cross-sectional …t. In addition, the equity premium puzzle is signi…cantly reduced in the models. We argue that in evaluating consumption based models...

  4. REDUCTION OF COST AND TIME CONSUMPTION IN WELL-CONSTRUCTION

    Directory of Open Access Journals (Sweden)

    Mladen Zelenika

    1998-12-01

    Full Text Available A Contractor usually utilizes the available drilling equipment when constructing just one single well. Drilling cost and time consumption in constructing the well MB-1, using the percussion method, and the well MB-2, using the conventional rotary drilling method, call for a separate analysis in order to justify the investment cost for the acquisition of additional equipment for a single well only. The wells, located in a karst vrtača close to an estavelle near Tomislavgrad, with a diameter of 500 mm and approximately 80 m deep, have been accomplished with a low rate of penetration using the conventional Cable tool and resp. Rotary Drilling Method. In this paper results of analyses for the given circumstances are shown: both the efficiency and cost of the mentioned drilling methods performed by the crews of »Geotehnika d.d.« Zagreb, as well as the justifiability of investments in new equipment are evaluated.

  5. Modeling Residential Electricity Consumption Function in Malaysia: Time Series Approach

    OpenAIRE

    L. L. Ivy-Yap; H. A. Bekhet

    2014-01-01

    As the Malaysian residential electricity consumption continued to increase rapidly, effective energy policies, which address factors affecting residential electricity consumption, is urgently needed. This study attempts to investigate the relationship between residential electricity consumption (EC), real disposable income (Y), price of electricity (Pe) and population (Po) in Malaysia for 1978-2011 period. Unlike previous studies on Malaysia, the current study focuses on the residential secto...

  6. Solvent fractionation of rambutan (Nephelium lappaceum L. kernel fat for production of non-hydrogenated solid fat: Influence of time and solvent type

    Directory of Open Access Journals (Sweden)

    Busakorn Mahisanunt

    2017-01-01

    Full Text Available The present study performed isothermal (25 °C solvent fractionation of rambutan (Nephelium lappaceum L. kernel fat (RKF to obtain the fat fraction that had melting properties comparable to a commercial hydrogenated solid fat. The effect of two fractionation parameters, holding time (12, 18 and 24 h and solvent types (acetone and ethanol, on the properties of fractionated fat were investigated. The results showed that a fractionation time increase caused an increased yield and decreased iodine value for the high melting or stearin fractions. The thermal behaviors and solid fat index (SFI of these stearin fractions were different from the original fat, especially for stearin from acetone fractionation. The major fatty acid in this stearin fraction was arachidic acid (C20:0 consisting of more than 90%. Overall, we demonstrated that acetone fractionation of RKF at 25 °C for 24 h is effective for producing a solid fat fraction, which has comparable crystallizing and melting properties to commercial hydrogenated fat. The fractionated rambutan fat obtained by this process may lead to its potential use in specific food products.

  7. Role of excited state solvent fluctuations on time-dependent fluorescence Stokes shift

    Energy Technology Data Exchange (ETDEWEB)

    Li, Tanping, E-mail: tanping@lsu.edu, E-mail: revatik@lsu.edu; Kumar, Revati, E-mail: tanping@lsu.edu, E-mail: revatik@lsu.edu [Department of Chemistry, Louisiana State University, Baton Rouge, Louisiana 70803 (United States)

    2015-11-07

    We explore the connection between the solvation dynamics of a chromophore upon photon excitation and equilibrium fluctuations of the solvent. Using molecular dynamics simulations, fluorescence Stokes shift for the tryptophan in Staphylococcus nuclease was examined using both nonequilibrium calculations and linear response theory. When the perturbed and unperturbed surfaces exhibit different solvent equilibrium fluctuations, the linear response approach on the former surface shows agreement with the nonequilibrium process. This agreement is excellent when the perturbed surface exhibits Gaussian statistics and qualitative in the case of an isomerization induced non-Gaussian statistics. However, the linear response theory on the unperturbed surface breaks down even in the presence of Gaussian fluctuations. Experiments also provide evidence of the connection between the excited state solvent fluctuations and the total fluorescence shift. These observations indicate that the equilibrium statistics on the excited state surface characterize the relaxation dynamics of the fluorescence Stokes shift. Our studies specifically analyze the Gaussian fluctuations of the solvent in the complex protein environment and further confirm the role of solvent fluctuations on the excited state surface. The results are consistent with previous investigations, found in the literature, of solutes dissolved in liquids.

  8. Optimal Consumption and Investment under Time-Varying Relative Risk Aversion

    DEFF Research Database (Denmark)

    Steffensen, Mogens

    2011-01-01

    We consider the continuous time consumption-investment problem originally formalized and solved by Merton in case of constant relative risk aversion. We present a complete solution for the case where relative risk aversion with respect to consumption varies with time, having in mind an investor...... with age-dependent risk aversion. This provides a new motivation for life-cycle investment rules. We study the optimal consumption and investment rules, in particular in the case where the relative risk aversion with respect to consumption is increasing with age....

  9. The effect of organic solvent, temperature and mixing time on the production of oil from Moringa oleifera seeds

    Science.gov (United States)

    Ghazali, Q.; Yasin, N. H. M.

    2016-06-01

    The effect of three different organic solvent, temperature and mixing time on the production of oil from M.oleifera seeds were studied to evaluate the effectiveness in obtaining the high oil yield based on the percentage of oil production. The modified version of Soxhlet extraction method was carried out to extract the oil from M.oleifera seeds by using hexane, heptane and ethanol as the organic solvent. Among the three solvents, it is found that heptane yield higher oil from M.oleifera seeds with maximum oil yield of 36.37% was obtained followed by hexane and ethanol with 33.89% and 18.46%, respectively. By using heptane as a solvent, the temperature (60oC, 70oC, 80oC) and mixing time (6 h, 7 h, and 8 h) were investigated to ensure the high oil yield over the experimental ranges employed and high oil yield was obtained at 600C for 6 h with percentage oil yield of 36.37%. The fatty acid compositions of M.oleifera seeds oil were analyzed using Gas Chromatography/Mass Spectrometry (GC-MS). The main components of fatty acid contained in the oil extracted from M.oleifera seeds was oleic acid, followed by palmitic acid and arachidic acid, and small amount of behenic acid and margaric acid.

  10. Three essays in energy consumption: Time series analyses

    Science.gov (United States)

    Ahn, Hee Bai

    1997-10-01

    Firstly, this dissertation investigates that which demand specification is an appropriate model for long-run energy demand between the conventional demand specification and the limited demand specification. In order to determine the components of a stable long-run demand for different sectors of the energy industry, I perform cointegration tests by using the Johansen test procedure. First, I test the conventional demand specification including prices and income as components. Second, I test a limited demand specification only income as a component. The reason for performing these tests is that we can determine that which demand specification is a good long-run predictor of energy consumption between the two demand specifications by using the cointegration tests. Secondly, for the purpose of planning and forecasting energy demand in case of cointegrated system, long-run elasticities are of particular interest. To retrieve the optimal level of energy demand in case of price shock, we need long-run elasticities rather than short-run elasticities. The energy demand study provides valuable information to the energy policy makers who are concerned about the long-run impact of taxes and tariffs. A long-run price elasticity is a primary barometer of the substitution effect between energy and non-energy inputs and long-run income elasticity is an important factor since we can measure the energy demand growing slowly or fast than in the past depending on the magnitude of long-run elasticity. The one other problem in estimating the total energy demand is that there exists an aggregation bias stemming from the process of summation in four different energy types for the total aggregation prices and total aggregation energy consumption. In order to measure the aggregation bias between the Btu aggregation method and the Divisia Index method, i.e., which methodology has less aggregation bias in the long-run, I compare the two estimation results with calculated results estimated on

  11. Scalable Prediction of Energy Consumption using Incremental Time Series Clustering

    Energy Technology Data Exchange (ETDEWEB)

    Simmhan, Yogesh; Noor, Muhammad Usman

    2013-10-09

    Time series datasets are a canonical form of high velocity Big Data, and often generated by pervasive sensors, such as found in smart infrastructure. Performing predictive analytics on time series data can be computationally complex, and requires approximation techniques. In this paper, we motivate this problem using a real application from the smart grid domain. We propose an incremental clustering technique, along with a novel affinity score for determining cluster similarity, which help reduce the prediction error for cumulative time series within a cluster. We evaluate this technique, along with optimizations, using real datasets from smart meters, totaling ~700,000 data points, and show the efficacy of our techniques in improving the prediction error of time series data within polynomial time.

  12. Research on the waiting time of passengers and escalator energy consumption at the railway station

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Wei-wu; Liu, Xiao-yan; Li, Liqing; Shi, Xiangnan; Zhou, Chenn Q. [School of Energy Science and Engineering, Central South University, Changsha 410083 (China)

    2009-12-15

    Based on the Little Formula and the classical queuing model of multi-channel M vertical stroke D vertical stroke n, the relation of the average queue length, the maximum waiting time and the escalator service intensity were identified and the waiting time simulation model was established. With the passenger delivery data at A railway station in China and the probability distribution model of waiting time, a detailed analysis was made on the escalator allocation, power and energy consumption on holidays, ordinary working days and the largest-passengers-volume days; meanwhile, the fixed and variable energy consumption were compared and studied when the waiting time are 5, 10 and 30 s. The result shows that the waiting time settings affect the allocation and the energy consumption of the escalators and the fixed energy consumption takes 70%. (author)

  13. The association between time perspective and alcohol consumption in university students: cross-sectional study.

    Science.gov (United States)

    Beenstock, Jane; Adams, Jean; White, Martin

    2011-08-01

    Heavy alcohol consumption is associated with significant morbidity and mortality. Levels of alcohol consumption among students and young people are particularly high. Time perspective describes the varying value individuals place on outcomes in the present and future. In general, it has been found that individuals prefer to receive a gain today rather than in the future. There is evidence that time perspective is associated with addictive health behaviours, including alcoholism and cigarette smoking, but less evidence of its association with non-addictive, but hazardous, levels of alcohol consumption. The objective was to determine if there is an association between time perspective and hazardous alcohol consumption. A cross-sectional survey using a self-completion questionnaire was administered to willing undergraduate students attending a convenience sample of lectures in two university faculties. Hazardous alcohol consumption was defined as a score of ≥8 on the Alcohol Use Disorders Identification Test (AUDIT) and time perspective was measured using the Consideration of Future Consequences Scale (CFCS). Participants were 322 undergraduate university students in two faculties at a university in Northern England, UK. Hazardous alcohol consumption was reported by 264 (82%) respondents. After controlling for potential confounding by socio-demographic variables, greater consideration of future consequences was associated with lower odds of reporting hazardous drinking [odds ratio = 0.28; 95% confidence interval 0.15-0.54]. Interventions aimed at increasing future orientated time perspective may be effective in decreasing hazardous alcohol consumption in students.

  14. Food Consumption Patterns in Times of Economic Recession

    NARCIS (Netherlands)

    Theodoridou, Glykeria; Tsakiridou, Efthimia; Kalogeras, Nikos; Mattas, Konstantinos

    2017-01-01

    The aim of this study is to identify the factors influencing consumers' purchasing behaviour for food, in times of crisis. Intercept survey was conducted in a random selected sample consisted of 553 consumers between January and May 2016 in the Prefecture of Thessaloniki. Multivariate data analysis

  15. Alcohol consumption at the time of conception and spontaneous abortion

    DEFF Research Database (Denmark)

    Henriksen, T.B.; Hjollund, N.H.; Jensen, Tina Kold

    2004-01-01

    The authors studied the association between female and male alcohol intakes at the time of conception and the risk of spontaneous abortion, including early pregnancy loss detected by urinary human chorionic gonadotropin. After a nationwide mailing to about 50,000 members of four trade unions...... in Denmark in 1992-1994, 430 couples without previous pregnancy attempts were enrolled when birth control was discontinued, and they were followed until a clinically recognized pregnancy or for six menstrual cycles. Alcohol intake and potential confounding factors were reported in monthly questionnaires...... with no intake were statistically significant. Both male and female alcohol intakes during the week of conception increased the risk of early pregnancy loss....

  16. The effect of solvent relaxation time constants on free energy gap law for ultrafast charge recombination following photoinduced charge separation.

    Science.gov (United States)

    Mikhailova, Valentina A; Malykhin, Roman E; Ivanov, Anatoly I

    2018-05-16

    To elucidate the regularities inherent in the kinetics of ultrafast charge recombination following photoinduced charge separation in donor-acceptor dyads in solutions, the simulations of the kinetics have been performed within the stochastic multichannel point-transition model. Increasing the solvent relaxation time scales has been shown to strongly vary the dependence of the charge recombination rate constant on the free energy gap. In slow relaxing solvents the non-equilibrium charge recombination occurring in parallel with solvent relaxation is very effective so that the charge recombination terminates at the non-equilibrium stage. This results in a crucial difference between the free energy gap laws for the ultrafast charge recombination and the thermal charge transfer. For the thermal reactions the well-known Marcus bell-shaped dependence of the rate constant on the free energy gap is realized while for the ultrafast charge recombination only a descending branch is predicted in the whole area of the free energy gap exceeding 0.2 eV. From the available experimental data on the population kinetics of the second and first excited states for a series of Zn-porphyrin-imide dyads in toluene and tetrahydrofuran solutions, an effective rate constant of the charge recombination into the first excited state has been calculated. The obtained rate constant being very high is nearly invariable in the area of the charge recombination free energy gap from 0.2 to 0.6 eV that supports the theoretical prediction.

  17. Argon direct analysis in real time mass spectrometry in conjunction with makeup solvents: a method for analysis of labile compounds.

    Science.gov (United States)

    Yang, Hongmei; Wan, Debin; Song, Fengrui; Liu, Zhiqiang; Liu, Shuying

    2013-02-05

    Helium direct analysis in real time (He-DART) mass spectrometry (MS) analysis of labile compounds usually tends to be challenging because of the occurrence of prominent fragmentation, which obscures the assigning of an ion to an independent species or merely a fragment in a mixture. In the present work, argon DART (Ar-DART) MS in conjunction with makeup solvents has been demonstrated to analyze a variety of labile compounds including nucleosides, alkaloids, glucose, and other small molecules. The results presented here confirm that Ar-DART can generate significantly less energetic ions than conventional He-DART and is able to produce the intact molecular ions with little or no fragmentation in both positive and negative ion modes. Adding a makeup solvent (absolute ethyl alcohol, methanol, fluorobenzene, or acetone) to the argon gas stream at the exit of the DART ion source can result in 1-2 orders of magnitude increase in detection signals. The sensitivity attainable by Ar-DART was found to be comparable to that by He-DART. The investigation of influence of solvents improves our understanding of the fundamental desorption and ionization processes in DART. The practical application of this rapid and high throughput method is demonstrated by the successful analysis of a natural product (Crude Kusnezoff Monkshood) extract, demonstrating the great potential in mixture research.

  18. ESTIMATED RATE OF FATAL AUTOMOBILE ACCIDENTS ATTRIBUTABLE TO ACUTE SOLVENT EXPOSURE AT LOW INHALED CONCENTRATIONS

    Science.gov (United States)

    Acute solvent exposures may contribute to automobile accidents because they increase reaction time and decrease attention, in addition to impairing other behaviors. These effects resemble those of ethanol consumption, both with respect to behavioral effects and neurological mecha...

  19. Accelerated Solvent Extraction: An Innovative Sample Extraction Technique for Natural Products

    International Nuclear Information System (INIS)

    Hazlina Ahmad Hassali; Azfar Hanif Abd Aziz; Rosniza Razali

    2015-01-01

    Accelerated solvent extraction (ASE) is one of the novel techniques that have been developed for the extraction of phytochemicals from plants in order to shorten the extraction time, decrease the solvent consumption, increase the extraction yield and enhance the quality of extracts. This technique combines elevated temperatures and pressure with liquid solvents. This paper gives a brief overview of accelerated solvent extraction technique for sample preparation and its application to the extraction of natural products. Through practical examples, the effects of operational parameters such as temperature, volume of solvent used, extraction time and extraction yields on the performance of ASE are discussed. It is demonstrated that ASE technique allows reduced solvent consumption and shorter extraction time, while the extraction yields are even higher than those obtained with conventional methods. (author)

  20. Optimizing Completion Time and Energy Consumption in a Bidirectional Relay Network

    DEFF Research Database (Denmark)

    Liu, Huaping; Sun, Fan; Thai, Chan

    2012-01-01

    consumption required for multiple flows depends on the current channel realizations, transmission methods used and, notably, the relation between the data sizes of different source nodes. In this paper we investigate the shortest completion time and minimal energy consumption in a two-way relay wireless...... arises for the minimal required energy. While the requirement for minimal energy consumption is obvious, the shortest completion time is relevant when certain multi-node network needs to reserve the wireless medium in order to carry out the data exchange among its nodes. The completion time/energy...... network. The system applies optimal time multiplexing of several known transmission methods, including one-way relaying and wireless network coding (WNC). We show that when the relay applies Amplify-and-Forward (AF), both minimizations are linear optimization problems. On the other hand, when the relay...

  1. Relationship Between Time Consumption and Quality of Responses to Drug-related Queries

    DEFF Research Database (Denmark)

    Amundstuen Reppe, Linda; Lydersen, Stian; Schjøtt, Jan

    2016-01-01

    in score, –0.05 per hour of work; 95% CI, –0.08 to –0.01; P = 0.005). No such associations were found for the internal experts’ assessment. Implications To our knowledge, this is the first study of the association between time consumption and quality of responses to drug-related queries in DICs......Purpose The aims of this study were to assess the quality of responses produced by drug information centers (DICs) in Scandinavia, and to study the association between time consumption processing queries and the quality of the responses. Methods We posed six identical drug-related queries to seven...... DICs in Scandinavia, and the time consumption required for processing them was estimated. Clinical pharmacologists (internal experts) and general practitioners (external experts) reviewed responses individually. We used mixed model linear regression analyses to study the associations between time...

  2. Total sleep time, alcohol consumption, and the duration and severity of alcohol hangover

    NARCIS (Netherlands)

    van Schrojenstein Lantman, Marith; Mackus, Marlou; Roth, Thomas; Verster, Joris C|info:eu-repo/dai/nl/241442702

    2017-01-01

    INTRODUCTION: An evening of alcohol consumption often occurs at the expense of sleep time. The aim of this study was to determine the relationship between total sleep time and the duration and severity of the alcohol hangover. METHODS: A survey was conducted among Dutch University students to

  3. Effect of dye extracting solvents and sensitization time on photovoltaic performance of natural dye sensitized solar cells

    Directory of Open Access Journals (Sweden)

    Md. Khalid Hossain

    Full Text Available In this study, natural dye sensitizer based solar cells were successfully fabricated and photovoltaic performance was measured. Sensitizer (turmeric sources, dye extraction process, and photoanode sensitization time of the fabricated cells were analyzed and optimized. Dry turmeric, verdant turmeric, and powder turmeric were used as dye sources. Five distinct types of solvents were used for extraction of natural dye from turmeric. Dyes were characterized by UV–Vis spectrophotometric analysis. The extracted turmeric dye was used as a sensitizer in the dye sensitized solar cell’s (DSSC photoanode assembly. Nano-crystalline TiO2 was used as a film coating semiconductor material of the photoanode. TiO2 films on ITO glass substrate were prepared by simple doctor blade technique. The influence of the different parameters VOC, JSC, power density, FF, and η% on the photovoltaic characteristics of DSSCs was analyzed. The best energy conversion performance was obtained for 2 h adsorption time of dye on TiO2 nano-porous surface with ethanol extracted dye from dry turmeric. Keywords: DSSC, Natural dye, TiO2 photoanode, Dye extracting solvent, Dye-adsorption time

  4. Impact of Extended Daylight Saving Time on National Energy Consumption Report to Congress

    Energy Technology Data Exchange (ETDEWEB)

    Belzer, D. B.; Hadley, S. W.; Chin, S-M.

    2008-10-01

    The Energy Policy Act of 2005 (Pub. L. No. 109-58; EPAct 2005) amended the Uniform Time Act of 1966 (Pub. L. No. 89-387) to increase the portion of the year that is subject to Daylight Saving Time. (15 U.S.C. 260a note) EPAct 2005 extended the duration of Daylight Saving Time in the spring by changing its start date from the first Sunday in April to the second Sunday in March, and in the fall by changing its end date from the last Sunday in October to the first Sunday in November. (15 U.S.C. 260a note) EPAct 2005 also called for the Department of Energy to evaluate the impact of Extended Daylight Saving Time on energy consumption in the United States and to submit a report to Congress. (15 U.S.C. 260a note) This report presents the results of impacts of Extended Daylight Saving Time on the national energy consumption in the United States. The key findings are: (1) The total electricity savings of Extended Daylight Saving Time were about 1.3 Tera Watt-hour (TWh). This corresponds to 0.5 percent per each day of Extended Daylight Saving Time, or 0.03 percent of electricity consumption over the year. In reference, the total 2007 electricity consumption in the United States was 3,900 TWh. (2) In terms of national primary energy consumption, the electricity savings translate to a reduction of 17 Trillion Btu (TBtu) over the spring and fall Extended Daylight Saving Time periods, or roughly 0.02 percent of total U.S. energy consumption during 2007 of 101,000 TBtu. (3) During Extended Daylight Saving Time, electricity savings generally occurred over a three- to five-hour period in the evening with small increases in usage during the early-morning hours. On a daily percentage basis, electricity savings were slightly greater during the March (spring) extension of Extended Daylight Saving Time than the November (fall) extension. On a regional basis, some southern portions of the United States exhibited slightly smaller impacts of Extended Daylight Saving Time on energy savings

  5. The effect of daylight saving time options on electricity consumption of Turkey

    Energy Technology Data Exchange (ETDEWEB)

    Karasu, Servet [Rize University, Rize Vocational School, 53100, Rize (Turkey)

    2010-09-15

    Most of the developed countries in the world use Daylight Saving Time (DST) as an energy conservation method. This study focuses on the effects of DST on electrical lighting in the buildings in Turkey. Turkey might adjust its daylight saving time to decrease energy consumption. For this purpose, five scenarios are considered and compared to status quo. The scenario with a 30-minute forward shift to single DST from April to October, stands out as the best solution to conserve electricity across the entire country. The results of the study show that maximum saving is obtained in this scenario by at least 0.7% on the consumption of lighting electricity. (author)

  6. Effects of copolymer composition, film thickness, and solvent vapor annealing time on dewetting of ultrathin block copolymer films.

    Science.gov (United States)

    Huang, Changchun; Wen, Gangyao; Li, Jingdan; Wu, Tao; Wang, Lina; Xue, Feifei; Li, Hongfei; Shi, Tongfei

    2016-09-15

    Effects of copolymer composition, film thickness, and solvent vapor annealing time on dewetting of spin-coated polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) films (dewetting of the films with different thicknesses occur via the spinodal dewetting and the nucleation and growth mechanisms, respectively. The PS-b-PMMA films rupture into droplets which first coalesce into large ones to reduce the surface free energy. Then the large droplets rupture into small ones to increase the contact area between PMMA blocks and acetone molecules resulting from ultimate migration of PMMA blocks to droplet surface, which is a novel dewetting process observed in spin-coated films for the first time. Copyright © 2016 Elsevier Inc. All rights reserved.

  7. Coping with Time Pressure and Stress: Consequences for Families’ Food Consumption

    OpenAIRE

    Alm, Siril; Olsen, Svein Ottar

    2016-01-01

    This study explores the coping strategies that families apply when under time pressure and stress (time stress), and how such strategies affect food consumption at dinnertime. The data were based on photo interviewing methodology with a sample of 12 Norwegian children (ages seven and eight) and their parents. In this case, the children were asked to take photographs during their dinners at home and while shopping for groceries with their parents. The findings show that the most dominant expla...

  8. Introducing a standard method for experimental determination of the solvent response in laser pump, x-ray probe time-resolved wide-angle x-ray scattering experiments on systems in solution

    DEFF Research Database (Denmark)

    Kjær, Kasper Skov; Brandt van Driel, Tim; Kehres, Jan

    2013-01-01

    In time-resolved laser pump, X-ray probe wide-angle X-ray scattering experiments on systems in solution the structural response of the system is accompanied by a solvent response. The solvent response is caused by reorganization of the bulk solvent following the laser pump event, and in order...... response-the solvent term-experimentally when applying laser pump, X-ray probe time-resolved wide-angle X-ray scattering. The solvent term describes difference scattering arising from the structural response of the solvent to changes in the hydrodynamic parameters: pressure, temperature and density. We...... is demonstrated to exhibit first order behaviour with respect to the amount of energy deposited in the solution. We introduce a standardized method for recording solvent responses in laser pump, X-ray probe time-resolved X-ray wide-angle scattering experiments by using dye mediated solvent heating. Furthermore...

  9. Solvent effects in time-dependent self-consistent field methods. II. Variational formulations and analytical gradients

    International Nuclear Information System (INIS)

    Bjorgaard, J. A.; Velizhanin, K. A.; Tretiak, S.

    2015-01-01

    This study describes variational energy expressions and analytical excited state energy gradients for time-dependent self-consistent field methods with polarizable solvent effects. Linear response, vertical excitation, and state-specific solventmodels are examined. Enforcing a variational ground stateenergy expression in the state-specific model is found to reduce it to the vertical excitation model. Variational excited state energy expressions are then provided for the linear response and vertical excitation models and analytical gradients are formulated. Using semiempiricalmodel chemistry, the variational expressions are verified by numerical and analytical differentiation with respect to a static external electric field. Lastly, analytical gradients are further tested by performing microcanonical excited state molecular dynamics with p-nitroaniline

  10. Bi-Objective Flexible Job-Shop Scheduling Problem Considering Energy Consumption under Stochastic Processing Times.

    Science.gov (United States)

    Yang, Xin; Zeng, Zhenxiang; Wang, Ruidong; Sun, Xueshan

    2016-01-01

    This paper presents a novel method on the optimization of bi-objective Flexible Job-shop Scheduling Problem (FJSP) under stochastic processing times. The robust counterpart model and the Non-dominated Sorting Genetic Algorithm II (NSGA-II) are used to solve the bi-objective FJSP with consideration of the completion time and the total energy consumption under stochastic processing times. The case study on GM Corporation verifies that the NSGA-II used in this paper is effective and has advantages to solve the proposed model comparing with HPSO and PSO+SA. The idea and method of the paper can be generalized widely in the manufacturing industry, because it can reduce the energy consumption of the energy-intensive manufacturing enterprise with less investment when the new approach is applied in existing systems.

  11. The impact of daylight saving time on electricity consumption: Evidence from southern Norway and Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Mirza, Faisal Mehmood, E-mail: faisal.mirza@umb.no [Department of Economics and Resource Management, Norwegian University of Life Sciences (UMB), P.O. Box 5003, 1432 As (Norway); Bergland, Olvar, E-mail: olvar.bergland@umb.no [Department of Economics and Resource Management, Norwegian University of Life Sciences (UMB), P.O. Box 5003, 1432 As (Norway)

    2011-06-15

    This paper examines the impact of daylight saving time (DST) on electricity consumption in southern Norway and Sweden. As DST was implemented in both the countries in 1980, we do not have a clear counterfactual in the form of a control period to identify the impact of DST directly with before and after or with and without analysis. This problem in the study is resolved by using 'equivalent day normalization technique' to identify the impact of DST. The difference-in-difference (DID) average treatment effects model suggests an annual reduction of at least 1.0 percent in electricity consumption for both Norway and Sweden due to DST. The average annual electricity consumption reduction corresponding to DST effects equals 519 and 882 GWh for southern Norway and Sweden, resulting in an annual financial saving of 16.1 million Euros and 30.1 million Euros, respectively. The distribution of treatment effects across different hours of the day indicates a small but significant reduction in electricity consumption during the morning and a steep decline during the evening hours in both countries. - Highlights: > We assess the impact of DST on electricity consumption in southern Norway and Sweden. > DST reduces electricity consumption by 1.3 percent in both countries. > The impact is smaller during the morning hours but larger during evening hours. > Respective annual financial savings equal Euro 16.1 and 30.1 million for Norway and Sweden. > Average annual electricity savings equal 519 and 882 GWh for two countries, respectively.

  12. The impact of daylight saving time on electricity consumption: Evidence from southern Norway and Sweden

    International Nuclear Information System (INIS)

    Mirza, Faisal Mehmood; Bergland, Olvar

    2011-01-01

    This paper examines the impact of daylight saving time (DST) on electricity consumption in southern Norway and Sweden. As DST was implemented in both the countries in 1980, we do not have a clear counterfactual in the form of a control period to identify the impact of DST directly with before and after or with and without analysis. This problem in the study is resolved by using 'equivalent day normalization technique' to identify the impact of DST. The difference-in-difference (DID) average treatment effects model suggests an annual reduction of at least 1.0 percent in electricity consumption for both Norway and Sweden due to DST. The average annual electricity consumption reduction corresponding to DST effects equals 519 and 882 GWh for southern Norway and Sweden, resulting in an annual financial saving of 16.1 million Euros and 30.1 million Euros, respectively. The distribution of treatment effects across different hours of the day indicates a small but significant reduction in electricity consumption during the morning and a steep decline during the evening hours in both countries. - Highlights: → We assess the impact of DST on electricity consumption in southern Norway and Sweden. → DST reduces electricity consumption by 1.3 percent in both countries. → The impact is smaller during the morning hours but larger during evening hours. → Respective annual financial savings equal Euro 16.1 and 30.1 million for Norway and Sweden. → Average annual electricity savings equal 519 and 882 GWh for two countries, respectively.

  13. Association between screen time and snack consumption in children and adolescents: The CASPIAN-IV study.

    Science.gov (United States)

    Kelishadi, Roya; Mozafarian, Nafiseh; Qorbani, Mostafa; Maracy, Mohammad Reza; Motlagh, Mohammad Esmaeil; Safiri, Saeid; Ardalan, Gelayol; Asayesh, Hamid; Rezaei, Fatemeh; Heshmat, Ramin

    2017-02-01

    The relationship between screen time (ST) and the frequency of snack consumption in a national sample of Iranian children and adolescents was assessed. The present nationwide survey was conducted on 14,880 school students living in urban and rural areas of 30 provinces in Iran. Trained healthcare providers conducted the physical examination and completed the questionnaire of the World Health Organization - Global School-Based Student Health Survey (WHO-GSHS). The association between ST (total time spent watching TV and using a computer in leisure time) and the frequency of snack consumption was determined using ordinal logistic regression analysis. The subjects were 13,486 students out of the 14,880 invited including 50.8% boys. The mean (SD) age of participants was 12.47 (3.36) years. In multivariate models, for students who had prolonged ST (more than 4 h/day), the odds of daily consumption of sweets (odds ratio, OR 1.25; 95% CI 1.14-1.4), salty snacks (OR 1.6; 95% CI 1.5-1.76), soft drinks (OR 1.52; 95% CI 1.4-1.7), canned fruit juice (OR 1.3; 95% CI 1.2-1.4), and fast food (OR 1.53; 95% CI 1.4-1.7) were higher compared to those with low ST. Furthermore, the odds of daily consumption of milk in students who had prolonged ST (more than 4 h/day) were lower compared to those with low ST (OR 0.9; 95% CI 0.8-0.99). Prolonged time spent watching TV and using a computer during leisure time might be associated with unhealthy dietary habits. Moreover, inactivity induced by prolonged ST may also lead to unhealthy dietary habits and in turn excess weight in children and adolescents.

  14. Optimizing Ship Speed to Minimize Total Fuel Consumption with Multiple Time Windows

    Directory of Open Access Journals (Sweden)

    Jae-Gon Kim

    2016-01-01

    Full Text Available We study the ship speed optimization problem with the objective of minimizing the total fuel consumption. We consider multiple time windows for each port call as constraints and formulate the problem as a nonlinear mixed integer program. We derive intrinsic properties of the problem and develop an exact algorithm based on the properties. Computational experiments show that the suggested algorithm is very efficient in finding an optimal solution.

  15. Big Data Mining of Energy Time Series for Behavioral Analytics and Energy Consumption Forecasting

    Directory of Open Access Journals (Sweden)

    Shailendra Singh

    2018-02-01

    Full Text Available Responsible, efficient and environmentally aware energy consumption behavior is becoming a necessity for the reliable modern electricity grid. In this paper, we present an intelligent data mining model to analyze, forecast and visualize energy time series to uncover various temporal energy consumption patterns. These patterns define the appliance usage in terms of association with time such as hour of the day, period of the day, weekday, week, month and season of the year as well as appliance-appliance associations in a household, which are key factors to infer and analyze the impact of consumers’ energy consumption behavior and energy forecasting trend. This is challenging since it is not trivial to determine the multiple relationships among different appliances usage from concurrent streams of data. Also, it is difficult to derive accurate relationships between interval-based events where multiple appliance usages persist for some duration. To overcome these challenges, we propose unsupervised data clustering and frequent pattern mining analysis on energy time series, and Bayesian network prediction for energy usage forecasting. We perform extensive experiments using real-world context-rich smart meter datasets. The accuracy results of identifying appliance usage patterns using the proposed model outperformed Support Vector Machine (SVM and Multi-Layer Perceptron (MLP at each stage while attaining a combined accuracy of 81.82%, 85.90%, 89.58% for 25%, 50% and 75% of the training data size respectively. Moreover, we achieved energy consumption forecast accuracies of 81.89% for short-term (hourly and 75.88%, 79.23%, 74.74%, and 72.81% for the long-term; i.e., day, week, month, and season respectively.

  16. Effect of dye extracting solvents and sensitization time on photovoltaic performance of natural dye sensitized solar cells

    Science.gov (United States)

    Hossain, Md. Khalid; Pervez, M. Firoz; Mia, M. N. H.; Mortuza, A. A.; Rahaman, M. S.; Karim, M. R.; Islam, Jahid M. M.; Ahmed, Farid; Khan, Mubarak A.

    In this study, natural dye sensitizer based solar cells were successfully fabricated and photovoltaic performance was measured. Sensitizer (turmeric) sources, dye extraction process, and photoanode sensitization time of the fabricated cells were analyzed and optimized. Dry turmeric, verdant turmeric, and powder turmeric were used as dye sources. Five distinct types of solvents were used for extraction of natural dye from turmeric. Dyes were characterized by UV-Vis spectrophotometric analysis. The extracted turmeric dye was used as a sensitizer in the dye sensitized solar cell's (DSSC) photoanode assembly. Nano-crystalline TiO2 was used as a film coating semiconductor material of the photoanode. TiO2 films on ITO glass substrate were prepared by simple doctor blade technique. The influence of the different parameters VOC, JSC, power density, FF, and η% on the photovoltaic characteristics of DSSCs was analyzed. The best energy conversion performance was obtained for 2 h adsorption time of dye on TiO2 nano-porous surface with ethanol extracted dye from dry turmeric.

  17. Deasphalting solvents

    International Nuclear Information System (INIS)

    Carrillo, J. A; Caceres, J; Vela, G; Bueno, H

    1996-01-01

    This paper describes how the deasphalted oil (DMO) or demetalized oil (DMO) quality (CCR, Ni, V end asphaltenes contents) changes with: DAO or DMO yield, solvent/feed ratio, type of vacuum reside (from paraffinic to blends with vis breaking bottoms), extraction temperature and extraction solvent (propane, propylene, n-butane and I butane)

  18. Delimbing and Cross-cutting of Coniferous Trees–Time Consumption, Work Productivity and Performance

    Directory of Open Access Journals (Sweden)

    Arcadie Ciubotaru

    2018-04-01

    Full Text Available This research established the time consumption, work time structure, and productivity for primary processing in felling areas of coniferous trees felled with a chainsaw. Delimbing and partial cross-cutting were taken into consideration. The research was conducted in a mixed spruce and fir tree stand situated in the Carpathian Mountains. The team of workers consisted of a chainsaw operator and assistant with over 10 years of experience. The results indicated a total time of 536.32 s·m−3 (1145.26 s·tree−1, work performance (including delays of 6.716 m3·h−1 (3.14 tree·h−1, and work productivity (without delays of 35.459 m3·h−1 (16.58 tree·h−1. The chainsaw productivity during tree cross-cutting was 82.29 cm2·s−1. Delimbing accounted for 96.18% of the real work time, while cross-cutting accounted for 3.82%. The time consumption for delimbing and cross-cutting, as well as the work productivity and performance in the primary processing of coniferous trees in the felling area, were influenced by the breast height diameter, stem length, and tree volume, while the chainsaw productivity was influenced by the diameter of the cross-cut sections. The relationships between the aforementioned dependent and independent variables were determined by simple and linear multiple regression equations.

  19. Effects of solvent volatilization time on the bond strength of etch-and-rinse adhesive to dentin using conventional or deproteinization bonding techniques.

    Science.gov (United States)

    de Sousa Júnior, José Aginaldo; Carregosa Santana, Márcia Luciana; de Figueiredo, Fabricio Eneas Diniz; Faria-E-Silva, André Luis

    2015-08-01

    This study determined the effect of the air-stream application time and the bonding technique on the dentin bond strength of adhesives with different solvents. Furthermore, the content and volatilization rate of the solvents contained in the adhesives were also evaluated. Three adhesive systems with different solvents (Stae, SDI, acetone; XP Bond, Dentsply De Trey, butanol; Ambar, FGM, ethanol) were evaluated. The concentrations and evaporation rates of each adhesive were measured using an analytical balance. After acid-etching and rinsing, medium occlusal dentin surfaces of human molars were kept moist (conventional) or were treated with 10% sodium hypochlorite for deproteinization. After applying adhesives over the dentin, slight air-stream was applied for 10, 30 or 60 sec. Composite cylinders were built up and submitted to shear testing. The data were submitted to ANOVA and Tukey's test (α = 0.05). Stae showed the highest solvent content and Ambar the lowest. Acetone presented the highest evaporation rate, followed by butanol. Shear bond strengths were significantly affected only by the factors of 'adhesive' and 'bonding technique' (p Stae showed the lowest bond strength values (p < 0.05), while no significant difference was observed between XP Bond and Ambar. Despite the differences in content and evaporation rate of the solvents, the duration of air-stream application did not affect the bond strength to dentin irrespective of the bonding technique.

  20. Temperature effect on life-time of electron-excited uranyl ion. III. Effect of deuteration of solvent

    International Nuclear Information System (INIS)

    Lotnik, S.V.; Khamidullina, L.A.; Kazakov, V.P.

    2001-01-01

    Effect of deuteration of solvent was detected. The effect appeared in significant difference of shape of curves of uranyl ion (UO 2 2+ )* life-time temperature dependences in electron-excited state (τ). The curves were plotted during heating of frozen up to 77 K H 2 SO 4 solutions in H 2 O and D 2 SO 4 solutions in D 2 O. It was shown that in the case of D 2 SO 4 τ value in glass-like solution was lower then in polycrystalline sample, whereas in frozen H 2 SO 4 solutions there was opposite picture. Detected isotope effect was explained just as different proceeding of phase transition in H 2 SO 4 and D 2 SO 4 solutions so significant decrease of probability of nonradiating deactivation of (UO 2 2+ )* absorbed on D 2 SO 4 ·4D 2 O crystallohydrate surface in comparison with (UO 2 2+ )* absorbed on H 2 SO 4 ·4H 2 O and H 2 SO 4 ·6.5H 2 O crystallohydrate surfaces [ru

  1. PLLA-PHB fiber membranes obtained by solvent-free electrospinning for short-time drug delivery.

    Science.gov (United States)

    Cao, K; Liu, Y; Olkhov, A A; Siracusa, V; Iordanskii, A L

    2018-02-01

    Fibers of poly(L-lactic acid) (PLLA)/polyhydroxybutyrate (PHB) with different concentrations of the drug dipyridamole (DPD) were prepared using solvent-free melt electrospinning to obtain a polymeric drug delivery system. The electrospun fibers were morphologically, structurally, thermally, and dynamically characterized. Crazes that resemble lotus root crevices were interestingly observed in the 7:3 PLLA/PHB fibers with 1% DPD. The crystallinity of PLLA slightly decreased as PHB was incorporated, and the addition of DPD significantly reduced the melting temperature of the composite. The interactions between PLLA and PHB mainly occurred at a proportion of 7:3, and drug encapsulation in the fibers was verified. The kinetic profiles of drug release demonstrated the predominant multiple patterns involving a diffusional stage in the short-term mode of release and kinetic process related to the hydrolysis of the biopolymers. Furthermore, the dynamic behavior of the polymer molecules was evaluated based on the segmental mobility using probe electron spin resonance spectroscopy. The segmental mobility in the amorphous fraction of PLLA decreased with increasing PLLA content. The 9:1 PLLA/PHB system was more resistant to polymer hydrolysis than to the 7:3 system and the rate of diffusion transport was approximately two times higher for the 7:3 PLLA/PHB fibers than for the 9:1 PLLA/PHB fibers.

  2. Delay times between harvesting or collection of food products and consumption for use in radiological assessments

    International Nuclear Information System (INIS)

    Jones, A L; Sherwood, J C

    2009-01-01

    From a radiological protection point of view, the inclusion of delay times when carrying out assessments of dose from consumption of foods should be considered. A review of delay times has been carried out to update a report published in 1983, to take account of changes and modernisations in industrial food processes, together with changes in diet and popularity of different foods in the United Kingdom. The new review considered more foods and data for existing foods have been reconsidered to check whether manufacturing processes or procedures have changed the shelf-life of any products. For some foods there have been changes made to the recommended delay times because of changes in manufacture or handling of the fresh foodstuff. A discussion is also included on the appropriate use of delay times in dose assessments.

  3. Minimization of spin-lattice relaxation time with highly viscous solvents for acquisition of natural abundance nitrogen-15 and silicon-29 nuclear magnetic resonance spectra

    International Nuclear Information System (INIS)

    Bammel, B.P.; Evilia, R.F.

    1982-01-01

    The use of high viscosity solution conditions to decrease T 1 of 15 N and 29 Si nuclei so that natural abundance NMR spectra can be acquired in reasonable times is illustrated. Significant T 1 decreases with negligible increases in peak width are observed. No spectral shifts are observed in any of the cases studied. Highly viscous solutions are produced by using glycerol as a solvent for water-soluble molecules and a mixed solvent consisting of toluene saturated with polystyrene for organic-soluble molecules. The microviscosity in the latter solvent is found to be much less than the observed macroviscosity. Hydrogen bonding of glycerol to the NH 2 of 2-aminopyridine results in a greater than predicted decrease in T 1 for this nitrogen. The technique appears to be a useful alternative to paramagnetic relaxation reagents

  4. Flexibility of Enzymes Suspended in Organic Solvents Probed by Time-Resolved Fluorescence Anisotropy. Evidence That Enzyme Activity and Enantioselectivity Are Directly Related to Enzyme Flexibility

    NARCIS (Netherlands)

    Broos, Jaap; Visser, Antonie J.W.G.; Engbersen, Johan F.J.; Verboom, Willem; Hoek, Arie van; Reinhoudt, David N.

    1995-01-01

    A time-resolved fluorescence anisotropy study on the molecular flexibility of active-site labeled anthraniloyl-α-chymotrypsin, dansylsubtilisin Carlsberg, and native subtilisin Carlsberg, suspended in organic solvents, is described. The internal rotational mobility of the fluorophore in the

  5. Timing and Type of Alcohol Consumption and the Metabolic Syndrome - ELSA-Brasil

    Science.gov (United States)

    Vieira, Bruna Angelo; Luft, Vivian Cristine; Schmidt, Maria Inês; Chambless, Lloyd Ellwood; Chor, Dora; Barreto, Sandhi Maria; Duncan, Bruce Bartholow

    2016-01-01

    The prevalence of the metabolic syndrome is rising worldwide. Its association with alcohol intake, a major lifestyle factor, is unclear, particularly with respect to the influence of drinking with as opposed to outside of meals. We investigated the associations of different aspects of alcohol consumption with the metabolic syndrome and its components. In cross-sectional analyses of 14,375 active or retired civil servants (aged 35–74 years) participating in the Brazilian Longitudinal Study of Adult Health (ELSA-Brasil), we fitted logistic regression models to investigate interactions between the quantity of alcohol, the timing of its consumption with respect to meals, and the predominant beverage type in the association of alcohol consumption with the metabolic syndrome. In analyses adjusted for age, sex, educational level, income, socioeconomic status, ethnicity, smoking, body mass index, and physical activity, light consumption of alcoholic beverages with meals was inversely associated with the metabolic syndrome (≤4 drinks/week: OR = 0.85, 95%CI 0.74–0.97; 4 to 7 drinks/week: OR = 0.75, 95%CI 0.61–0.92), compared to abstention/occasional drinking. On the other hand, greater consumption of alcohol consumed outside of meals was significantly associated with the metabolic syndrome (7 to 14 drinks/week: OR = 1.32, 95%CI 1.11–1.57; ≥14 drinks/week: OR = 1.60, 95%CI 1.29–1.98). Drinking predominantly wine, which occurred mostly with meals, was significantly related to a lower syndrome prevalence; drinking predominantly beer, most notably when outside of meals and in larger quantity, was frequently associated with a greater prevalence. In conclusion, the alcohol—metabolic syndrome association differs markedly depending on the relationship of intake to meals. Beverage preference—wine or beer—appears to underlie at least part of this difference. Notably, most alcohol was consumed in metabolically unfavorable type and timing. If further investigations

  6. Solvent substitution

    International Nuclear Information System (INIS)

    1990-01-01

    The DOE Environmental Restoration and Waste Management Office of Technology Development and the Air Force Engineering and Services Center convened the First Annual International Workshop on Solvent Substitution on December 4--7, 1990. The primary objectives of this joint effort were to share information and ideas among attendees in order to enhance the development and implementation of required new technologies for the elimination of pollutants associated with industrial use of hazardous and toxic solvents; and to aid in accelerating collaborative efforts and technology transfer between government and industry for solvent substitution. There were workshop sessions focusing on Alternative Technologies, Alternative Solvents, Recovery/Recycling, Low VOC Materials and Treatment for Environmentally Safe Disposal. The 35 invited papers presented covered a wide range of solvent substitution activities including: hardware and weapons production and maintenance, paint stripping, coating applications, printed circuit boards, metal cleaning, metal finishing, manufacturing, compliance monitoring and process control monitoring. This publication includes the majority of these presentations. In addition, in order to further facilitate information exchange and technology transfer, the US Air Force and DOE solicited additional papers under a general ''Call for Papers.'' These papers, which underwent review and final selection by a peer review committee, are also included in this combined Proceedings/Compendium. For those involved in handling, using or managing hazardous and toxic solvents, this document should prove to be a valuable resource, providing the most up-to-date information on current technologies and practices in solvent substitution. Individual papers are abstracted separated

  7. Solvent substitution

    Energy Technology Data Exchange (ETDEWEB)

    1990-01-01

    The DOE Environmental Restoration and Waste Management Office of Technology Development and the Air Force Engineering and Services Center convened the First Annual International Workshop on Solvent Substitution on December 4--7, 1990. The primary objectives of this joint effort were to share information and ideas among attendees in order to enhance the development and implementation of required new technologies for the elimination of pollutants associated with industrial use of hazardous and toxic solvents; and to aid in accelerating collaborative efforts and technology transfer between government and industry for solvent substitution. There were workshop sessions focusing on Alternative Technologies, Alternative Solvents, Recovery/Recycling, Low VOC Materials and Treatment for Environmentally Safe Disposal. The 35 invited papers presented covered a wide range of solvent substitution activities including: hardware and weapons production and maintenance, paint stripping, coating applications, printed circuit boards, metal cleaning, metal finishing, manufacturing, compliance monitoring and process control monitoring. This publication includes the majority of these presentations. In addition, in order to further facilitate information exchange and technology transfer, the US Air Force and DOE solicited additional papers under a general Call for Papers.'' These papers, which underwent review and final selection by a peer review committee, are also included in this combined Proceedings/Compendium. For those involved in handling, using or managing hazardous and toxic solvents, this document should prove to be a valuable resource, providing the most up-to-date information on current technologies and practices in solvent substitution. Individual papers are abstracted separated.

  8. Household production and consumption over the life cycle: National Time Transfer Accounts in 14 European countries

    Directory of Open Access Journals (Sweden)

    Lili Vargha

    2017-03-01

    Full Text Available Background: While the importance of unpaid household labour is recognised in total economic output, little is known about the demographics of household production and consumption. Objective: Our goal is to give a comprehensive estimation on the value of household production and its consumption by age and gender and analyse nonmarket economic transfers in 14 European countries based on publicly available harmonised data. Methods: We introduce a novel imputation method of harmonised European time use (HETUS data to the European Union Statistics on Income and Living Conditions (EU-SILC in order to assign time spent on home production to consumers in households and estimate time transfers. Moreover, monetary values are attributed to household production activities using data on earnings from the Structure of Earnings Survey (SES. Results: We show that the nonmarket economic life cycle of men differs from that of women. The gender gap in household production is not evenly distributed over the life cycle. Women of working age contribute the most in net terms, while the main beneficiaries of household goods and services are children and to a lesser extent adult men. These patterns are similar across countries, with variations in the gender- and age-specific levels of home production and consumption. Conclusions: In Europe, in the national economy, intergenerational flows are important in sustaining both childhood and old age. In contrast, in the household economy, intergenerational transfers flow mostly towards children. Contribution: We add a new focus to the research on household production: While keeping the gender aspect, we demonstrate the importance of the life cycle component in household production.

  9. Research on intelligent power consumption strategy based on time-of-use pricing

    Science.gov (United States)

    Fu, Wei; Gong, Li; Chen, Heli; He, Yu

    2017-06-01

    In this paper, through the analysis of shortcomings of the current domestic and foreign household power consumption strategy: Passive way of power consumption, ignoring the different priority of electric equipment, neglecting the actual load pressure of the grid, ignoring the interaction with the user, to decrease the peak-valley difference and improve load curve in residential area by demand response (DR technology), an intelligent power consumption scheme based on time-of-use(TOU) pricing for household appliances is proposed. The main contribution of this paper is: (1) Three types of household appliance loads are abstracted from different operating laws of various household appliances, and the control models and DR strategies corresponding to these types are established. (2) The fuzzified processing for the information of TOU price, which is based on the time intervals, is performed to get the price priority, in accordance with such DR events as the maximum restricted load of DR, the time of DR and the duration of interruptible load and so on, the DR control rule and pre-scheduling mechanism are led in. (3) The dispatching sequence of household appliances in the control and scheduling queue are switched and controlled to implement the equilibrium of peak and valley loads. The equilibrium effects and economic benefits of power system by pre-scheduling and DR dispatching are compared and analyzed by simulation example, and the results show that using the proposed household appliance control (HAC) scheme the overall cost of consumers can be reduced and the power system load can be alleviated, so the proposed household appliance control (HAC) scheme is feasible and reasonable.

  10. Impacts of wireless charging lanes on travel time and energy consumption in a two-lane road system

    Science.gov (United States)

    He, Jia; Yang, Hai; Huang, Hai-Jun; Tang, Tie-Qiao

    2018-06-01

    In this paper, we propose a method to compare different energy consumption models and design a strategy to study the quantitative effects of wireless charging lane (WCL) on each electric vehicle's (EV's) link travel time. We utilize the modified energy consumption model and strategy to explore electric vehicle's electricity consumption and link travel time in a two-lane system with a WCL. The numerical results show that EVs' charging behavior on WCL will cause the drivers to execute the lane-changing maneuvers frequently and that the WCL has prominent impacts on EV's energy consumption and travel time, i.e., the capacity drops by 8%-17% while the EV's energy consumption increases by 3%-14% in the two-lane road system.

  11. Unconventional Consumption Methods and Enjoying Things Consumed: Recapturing the "First-Time" Experience.

    Science.gov (United States)

    O'Brien, Ed; Smith, Robert W

    2018-06-01

    People commonly lament the inability to re-experience familiar things as they were first experienced. Four experiments suggest that consuming familiar things in new ways can disrupt adaptation and revitalize enjoyment. Participants better enjoyed the same familiar food (Experiment 1), drink (Experiment 2), and video (Experiments 3a-3b) simply when re-experiencing the entity via unusual means (e.g., eating popcorn using chopsticks vs. hands). This occurs because unconventional methods invite an immersive "first-time" perspective on the consumption object: boosts in enjoyment were mediated by revitalized immersion into the consumption experience and were moderated by time such that they were strongest when using unconventional methods for the first time (Experiments 1-2); likewise, unconventional methods that actively disrupted immersion did not elicit the boost, despite being novel (Experiments 3a-3b). Before abandoning once-enjoyable entities, knowing to consume old things in new ways (vs. attaining new things altogether) might temporarily restore enjoyment and postpone wasteful replacement.

  12. Modeling of Bacillus cereus distribution in pasteurized milk at the time of consumption

    Directory of Open Access Journals (Sweden)

    Ľubomír Valík

    2013-02-01

    Full Text Available Normal 0 21 false false false SK X-NONE X-NONE Modelling of Bacillus cereus distribution, using data from pasteurized milk produced in Slovakia, at the time of consumption was performed in this study. The Modular Process Risk Model (MPRM methodology was applied to over all the consecutive steps in the food chain. The main factors involved in the risk of being exposed to unacceptable levels of B. cereus (model output were the initial density of B. cereus after milk pasteurization, storage temperatures and times (model input. Monte Carlo simulations were used for probability calculation of B. cereus density. By applying the sensitivity analysis influence of the input factors and their threshold values on the final count of B. cereus were determined. The results of the general case exposure assessment indicated that almost 14 % of Tetra Brik cartons can contain > 104 cfu/ml of B. cereus at the temperature distribution taken into account and time of pasteurized milk consumption. doi:10.5219/264

  13. Fast method to determine the elements in maize flour: reduction in preparation time and reagent consumption

    Directory of Open Access Journals (Sweden)

    Irineo Kelte Filho

    2017-10-01

    Full Text Available Abstract The aim of this work was to develop and validate methodology to reduce the digestion time and reagent consumption in the determination of minerals in maize flour. The standard methodology employed in Brazil is that described by AOAC. It consists of the calcination of the sample at high temperatures for a long period of time, making the process expensive and slow. In this work, a wet sample digestion method using HNO3 was employed, heating on a block digester with final dissolution in an ultrasonic bath. The validation tests involved linearity and working range studies, and the determination of the detection and quantification limits, accuracy and precision. The sample digestion time was 1:30 h and the percent recoveries for the metals were 93% for Ca, 98% for Cu, 110% for Fe, 97% for Mg, 101% for Mn and 106% for Zn.

  14. Application of semi parametric modelling to times series forecasting: case of the electricity consumption

    International Nuclear Information System (INIS)

    Lefieux, V.

    2007-10-01

    Reseau de Transport d'Electricite (RTE), in charge of operating the French electric transportation grid, needs an accurate forecast of the power consumption in order to operate it correctly. The forecasts used everyday result from a model combining a nonlinear parametric regression and a SARIMA model. In order to obtain an adaptive forecasting model, nonparametric forecasting methods have already been tested without real success. In particular, it is known that a nonparametric predictor behaves badly with a great number of explanatory variables, what is commonly called the curse of dimensionality. Recently, semi parametric methods which improve the pure nonparametric approach have been proposed to estimate a regression function. Based on the concept of 'dimension reduction', one those methods (called MAVE : Moving Average -conditional- Variance Estimate) can apply to time series. We study empirically its effectiveness to predict the future values of an autoregressive time series. We then adapt this method, from a practical point of view, to forecast power consumption. We propose a partially linear semi parametric model, based on the MAVE method, which allows to take into account simultaneously the autoregressive aspect of the problem and the exogenous variables. The proposed estimation procedure is practically efficient. (author)

  15. The impact of the daylight saving time on electricity consumption-A case study from Jordan

    International Nuclear Information System (INIS)

    Awad Momani, Mohammad; Yatim, Baharudin; Ali, Mohd Alauddin Mohd

    2009-01-01

    The paper examines the impact of daylight saving time (DST) on electricity consumption in Jordan. Two types of analysis were done: the first analysis examines the impact of DST on the lighting loads based on a survey study made for residential and commercial sectors. The second examines the impact of DST on the over all electricity generation through analyzing the daily load curves (DLCs) before and after the DST onset and removal in 2000 and 2007. The results show that the application of DST during the year 2000 saves the electricity used for illumination by -0.73% but it increases the overall generation at the onset and removal of DST by 0.5% and 1.4% due to increase in the heating and cooling loads. The analysis of DLCs during the year 2007 shows similar effects as in the year 2000 except during the early morning period at the DST onset where DST decreases the demand during this time. The analysis shows that DST decreases the electricity demand at DST onset by 0.2% and increases it at DST removal by 0.3%. A possible decrease in the electricity consumption may take place if the DST is implemented from April to end of August.

  16. Steady State and Time-Resolved Fluorescence Dynamics of Triphenylamine Based Oligomers with Phenylene/Thiophene/Furan in Solvents

    International Nuclear Information System (INIS)

    Qi, Zeng; Ying-Liang, Liu; Kang, Meng; Xiang-Jie, Zhao; Shu-Feng, Wang; Qi-Huang, Gong

    2009-01-01

    We investigate the photo-physical properties of a series of triphenylamine-based oligomers by steady-state and picosecond transient fluorescence measurements in solvents. The oligomers are composed alternatively with triphenylamine and phenylene/thiophene/furan group, bridged by vinyl group (PNB/PNT/PNF). Their fluorescence spectra show bathochromic phenomenon with solvent polarity and viscosity increasing. The fluorescence decays are bi-exponential for PNB and PNT, and tri-exponential for PNF in THF and aniline. The strong viscosity dependence suggests conformational relaxation along the PNF chain after photo excitation. (condensed matter: electronicstructure, electrical, magnetic, and opticalproperties)

  17. A latent class multiple constraint multiple discrete-continuous extreme value model of time use and goods consumption.

    Science.gov (United States)

    2016-06-01

    This paper develops a microeconomic theory-based multiple discrete continuous choice model that considers: (a) that both goods consumption and time allocations (to work and non-work activities) enter separately as decision variables in the utility fu...

  18. Associations of Caffeinated Beverage Consumption and Screen Time with Excessive Daytime Sleepiness in Korean High School Students

    OpenAIRE

    Jun, Nuri; Lee, Aeri; Baik, Inkyung

    2017-01-01

    The present study investigated caffeinated beverage consumption and screen time in the association with excessive daytime sleepiness (EDS) and sleep duration. We conducted a cross-sectional study including 249 Korean male high school students. These participants responded to a questionnaire inquiring the information on lifestyle factors, consumption of caffeinated beverages, time spent for screen media, and sleep duration as well as to the Epworth Sleepiness Scale (ESS) questionnaire. EDS was...

  19. Food consumption and digestion time estimation of spotted scat, Scatophagus argus, using X-radiography technique

    Energy Technology Data Exchange (ETDEWEB)

    Hashim, Marina; Abidin, Diana Atiqah Zainal [School of Environmental and Natural Resource Sciences, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor (Malaysia); Das, Simon K. [Marine Ecosystem Research Centre, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 UKM Bangi (Malaysia); Ghaffar, Mazlan Abd. [School of Environmental and Natural Resource Sciences, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia and Marine Ecosystem Research Centre, Faculty of Science and Technology, Universiti Kebangsaan M (Malaysia)

    2014-09-03

    The present study was conducted to investigate the food consumption pattern and gastric emptying time using x-radiography technique in scats fish, Scatophagus argus feeding to satiation in laboratory conditions. Prior to feeding experiment, fish of various sizes were examined their stomach volume, using freshly prepared stomachs ligatured at the tips of the burret, where the maximum amount of distilled water collected in the stomach were measured (ml). Stomach volume is correlated with maximum food intake (S{sub max}) and it can estimate the maximum stomach distension by allometric model i.e volume=0.0000089W{sup 2.93}. Gastric emptying time was estimated using a qualitative X-radiography technique, where the fish of various sizes were fed to satiation at different time since feeding. All the experimental fish was feed into satiation using radio-opaque barium sulphate (BaSO{sub 4}) paste injected in the wet shrimp in proportion to the body weight. The BaSO{sub 4} was found suitable to track the movement of feed/prey in the stomach over time and gastric emptying time of scats fish can be estimated. The results of qualitative X-Radiography observation of gastric motility, showed the fish (200 gm) that fed to maximum satiation meal (circa 11 gm) completely emptied their stomach within 30 - 36 hrs. The results of the present study will provide the first baseline information on the stomach volume, gastric emptying of scats fish in captivity.

  20. Food consumption and digestion time estimation of spotted scat, Scatophagus argus, using X-radiography technique

    Science.gov (United States)

    Hashim, Marina; Abidin, Diana Atiqah Zainal; Das, Simon K.; Ghaffar, Mazlan Abd.

    2014-09-01

    The present study was conducted to investigate the food consumption pattern and gastric emptying time using x-radiography technique in scats fish, Scatophagus argus feeding to satiation in laboratory conditions. Prior to feeding experiment, fish of various sizes were examined their stomach volume, using freshly prepared stomachs ligatured at the tips of the burret, where the maximum amount of distilled water collected in the stomach were measured (ml). Stomach volume is correlated with maximum food intake (Smax) and it can estimate the maximum stomach distension by allometric model i.e volume=0.0000089W2.93. Gastric emptying time was estimated using a qualitative X-radiography technique, where the fish of various sizes were fed to satiation at different time since feeding. All the experimental fish was feed into satiation using radio-opaque barium sulphate (BaSO4) paste injected in the wet shrimp in proportion to the body weight. The BaSO4 was found suitable to track the movement of feed/prey in the stomach over time and gastric emptying time of scats fish can be estimated. The results of qualitative X-Radiography observation of gastric motility, showed the fish (200 gm) that fed to maximum satiation meal (circa 11 gm) completely emptied their stomach within 30 - 36 hrs. The results of the present study will provide the first baseline information on the stomach volume, gastric emptying of scats fish in captivity.

  1. Food consumption and digestion time estimation of spotted scat, Scatophagus argus, using X-radiography technique

    International Nuclear Information System (INIS)

    Hashim, Marina; Abidin, Diana Atiqah Zainal; Das, Simon K.; Ghaffar, Mazlan Abd.

    2014-01-01

    The present study was conducted to investigate the food consumption pattern and gastric emptying time using x-radiography technique in scats fish, Scatophagus argus feeding to satiation in laboratory conditions. Prior to feeding experiment, fish of various sizes were examined their stomach volume, using freshly prepared stomachs ligatured at the tips of the burret, where the maximum amount of distilled water collected in the stomach were measured (ml). Stomach volume is correlated with maximum food intake (S max ) and it can estimate the maximum stomach distension by allometric model i.e volume=0.0000089W 2.93 . Gastric emptying time was estimated using a qualitative X-radiography technique, where the fish of various sizes were fed to satiation at different time since feeding. All the experimental fish was feed into satiation using radio-opaque barium sulphate (BaSO 4 ) paste injected in the wet shrimp in proportion to the body weight. The BaSO 4 was found suitable to track the movement of feed/prey in the stomach over time and gastric emptying time of scats fish can be estimated. The results of qualitative X-Radiography observation of gastric motility, showed the fish (200 gm) that fed to maximum satiation meal (circa 11 gm) completely emptied their stomach within 30 - 36 hrs. The results of the present study will provide the first baseline information on the stomach volume, gastric emptying of scats fish in captivity

  2. Solvent substitutes

    International Nuclear Information System (INIS)

    Evanoff, S.P.

    1995-01-01

    The environmental and industrial hygiene regulations promulgated since 1980, most notably the Superfund Amendments and Reauthorization Act (SARA), the Hazardous and Solid Waste Amendments to the Resources Conservation and Recovery Act (RCRA), and the Clean Air Act Amendments of 1990, have brought about an increased emphasis on user exposure, hazardous waste generation, and air emissions. As a result, industry is performing a fundamental reassessment of cleaning solvents, processes, and procedures. The more progressive organizations have made their goal the elimination of solvents that may pose significant potential human health and environmental hazards. This chapter discusses solvent cleaning in metal-finishing, metal-manufacturing, and industrial maintenance applications; precision cleaning; and electronics manufacturing. Nonmetallic cleaning, adhesives, coatings, inks, and aerosols also will be addressed, but in a more cursory manner

  3. Effects of solvent volatilization time on the bond strength of etch-and-rinse adhesive to dentin using conventional or deproteinization bonding techniques

    Directory of Open Access Journals (Sweden)

    José Aginaldo de Sousa Júnior

    2015-08-01

    Full Text Available Objectives This study determined the effect of the air-stream application time and the bonding technique on the dentin bond strength of adhesives with different solvents. Furthermore, the content and volatilization rate of the solvents contained in the adhesives were also evaluated. Materials and Methods Three adhesive systems with different solvents (Stae, SDI, acetone; XP Bond, Dentsply De Trey, butanol; Ambar, FGM, ethanol were evaluated. The concentrations and evaporation rates of each adhesive were measured using an analytical balance. After acid-etching and rinsing, medium occlusal dentin surfaces of human molars were kept moist (conventional or were treated with 10% sodium hypochlorite for deproteinization. After applying adhesives over the dentin, slight air-stream was applied for 10, 30 or 60 sec. Composite cylinders were built up and submitted to shear testing. The data were submitted to ANOVA and Tukey's test (α = 0.05. Results Stae showed the highest solvent content and Ambar the lowest. Acetone presented the highest evaporation rate, followed by butanol. Shear bond strengths were significantly affected only by the factors of 'adhesive' and 'bonding technique' (p < 0.05, while the factor 'duration of air-stream' was not significant. Deproteinization of dentin increased the bond strength (p < 0.05. Stae showed the lowest bond strength values (p < 0.05, while no significant difference was observed between XP Bond and Ambar. Conclusions Despite the differences in content and evaporation rate of the solvents, the duration of air-stream application did not affect the bond strength to dentin irrespective of the bonding technique.

  4. Direct Push Optical Screening Tool for High Resolution, Real-Time Mapping of Chlorinated Solvent DNAPL Architecture

    Science.gov (United States)

    2016-07-01

    petroleum hydrocarbon fuels due to higher densities, lower viscosities , and increased weathering (mass depletion) of residual chlorinated solvent DNAPL...generally classified as stratified layers of fine sand and silt with few clay layers. A silt layer was penetrated consistently at a depth of about 45...e.g., stiff clays ) there is potential for the thickness of the dye interaction zone to increase to approximately 1-2 mm. Intuition suggests that this

  5. Direct Push Optical Screening Tool for High-Resolution, Real-Time Mapping of Chlorinated Solvent DNAPL Architecture

    Science.gov (United States)

    2016-04-01

    due to higher densities, lower viscosities , and increased weathering (mass depletion) of residual chlorinated solvent DNAPL compared to those other...demonstration area can be generally classified as stratified layers of fine sand and silt with few clay layers. A silt layer was penetrated consistently at...toxic and carcinogenic. Another potential issue evaluated was that in plastic soils (stiff clays for example) there is potential for the thickness of

  6. Financial development and energy consumption nexus in Malaysia: A multivariate time series analysis

    OpenAIRE

    Islam, Faridul; Shahbaz, Muhammad; Alam, Mahmudul

    2011-01-01

    Despite a bourgeoning literature on the existence of a long-run relationship between energy consumption and economic growth, the findings have failed to establish clearly the direction of causation. A growing economy needs more energy, which is exacerbated by growing population. Evidence suggests that financial development can reduce overall energy consumption by achieving energy efficiency. Economic growth and energy consumption in Malaysia have been rising in tandem over the past several ye...

  7. Maternal alcohol consumption producing fetal alcohol spectrum disorders (FASD): quantity, frequency, and timing of drinking.

    Science.gov (United States)

    May, Philip A; Blankenship, Jason; Marais, Anna-Susan; Gossage, J Phillip; Kalberg, Wendy O; Joubert, Belinda; Cloete, Marise; Barnard, Ronel; De Vries, Marlene; Hasken, Julie; Robinson, Luther K; Adnams, Colleen M; Buckley, David; Manning, Melanie; Parry, Charles D H; Hoyme, H Eugene; Tabachnick, Barbara; Seedat, Soraya

    2013-12-01

    Concise, accurate measures of maternal prenatal alcohol use are needed to better understand fetal alcohol spectrum disorders (FASD). Measures of drinking by mothers of children with specific FASD diagnoses and mothers of randomly-selected controls are compared and also correlated with physical and cognitive/behavioral outcomes. Measures of maternal alcohol use can differentiate maternal drinking associated with FASD from that of controls and some from mothers of alcohol-exposed normals. Six variables that combine quantity and frequency concepts distinguish mothers of FASD children from normal controls. Alcohol use variables, when applied to each trimester and three months prior to pregnancy, provide insight on critical timing of exposure as well. Measures of drinking, especially bingeing, correlate significantly with increased child dysmorphology and negative cognitive/behavioral outcomes in children, especially low non-verbal IQ, poor attention, and behavioral problems. Logistic regression links (p<.001) first trimester drinking (vs. no drinking) with FASD, elevating FASD likelihood 12 times; first and second trimester drinking increases FASD outcomes 61 times; and drinking in all trimesters 65 times. Conversely, a similar regression (p=.008) indicates that drinking only in the first trimester makes the birth of a child with an FASD 5 times less likely than drinking in all trimesters. There is significant variation in alcohol consumption both within and between diagnostic groupings of mothers bearing children diagnosed within the FASD continuum. Drinking measures are empirically identified and correlated with specific child outcomes. Alcohol use, especially heavy use, should be avoided throughout pregnancy. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  8. MATERNAL ALCOHOL CONSUMPTION PRODUCING FETAL ALCOHOL SPECTRUM DISORDERS (FASD): QUANTITY, FREQUENCY, AND TIMING OF DRINKING

    Science.gov (United States)

    May, Philip A.; Blankenship, Jason; Marais, Anna-Susan; Gossage, J. Phillip; Kalberg, Wendy O.; Joubert, Belinda; Cloete, Marise; Barnard, Ronel; De Vries, Marlene; Hasken, Julie; Robinson, Luther K.; Adnams, Colleen M.; Buckley, David; Manning, Melanie; Parry, Charles; Hoyme, H. Eugene; Tabachnick, Barbara; Seedat, Soraya

    2013-01-01

    Background Concise, accurate measures of maternal prenatal alcohol use are needed to better understand fetal alcohol spectrum disorders (FASD). Methods Measures of drinking by mothers of children with specific FASD diagnoses and mothers of randomly-selected controls are compared and also correlated with physical and cognitive/behavioral outcomes. Results Measures of maternal alcohol use can differentiate maternal drinking associated with FASD from that of controls and some from mothers of alcohol-exposed normals. Six variables that combine quantity and frequency concepts distinguish mothers of FASD children from normal controls. Alcohol use variables, when applied to each trimester and three months prior to pregnancy, provide insight on critical timing of exposure as well. Measures of drinking, especially bingeing, correlate significantly with increased child dysmorphology and negative cognitive/behavioral outcomes in children, especially low non-verbal IQ, poor attention, and behavioral problems. Logistic regression links (palcohol consumption both within and between diagnostic groupings of mothers bearing children diagnosed within the FASD continuum. Drinking measures are empirically identified and correlated with specific child outcomes. Alcohol use, especially heavy use, should be avoided throughout pregnancy. PMID:23932841

  9. Electricity consumption-GDP nexus in Pakistan: A structural time series analysis

    International Nuclear Information System (INIS)

    Javid, Muhammad; Qayyum, Abdul

    2014-01-01

    This study investigates the relationships among electricity consumption, real economic activity, real price of electricity and the UEDT (underlying energy demand trend) at the aggregate and sectoral levels, namely, for the residential, commercial, industrial, and agricultural sectors. To achieve this goal, an electricity demand function for Pakistan is estimated by applying the structural time series technique to annual data for the period from 1972 to 2012. In addition to identifying the size and significance of the price and income elasticities, this technique also uncovers UEDT for the whole economy as well as for sub-sectors. The results suggest that the nature of the trend is not linear and deterministic but stochastic in form. The UEDT for the electricity usage of the commercial, agricultural and residential sectors shows an upward slope. This upward slope of the UEDT suggests that either energy efficient equipment has not been introduced in these sectors or any energy efficiency improvements due to technical progress is outweighed by other exogenous factors. - Highlights: • Electricity demand function is estimated by applying the STSM approach. • The results suggest that nature of trend is stochastic in form. • Low price elasticity reflects weak link between the electricity price and demand. • Low price elasticity implies that demand did not react to changes in price

  10. Continuous Real-time Viability Assessment of Kidneys Based on Oxygen Consumption

    Science.gov (United States)

    Weegman, B.P.; Kirchner, V.A.; Scott, W.E.; Avgoustiniatos, E.S.; Suszynski, T.M.; Ferrer-Fabrega, J.; Rizzari, M.D.; Kidder, L.S.; Kandaswamy, R.; Sutherland, D.E.R.; Papas, K.K.

    2010-01-01

    Background Current ex vivo quality assessment of donor kidneys is limited to vascular resistance measurements and histological analysis. New techniques for the assessment of organ quality before transplantation may further improve clinical outcomes while expanding the depleted deceased-donor pool. We propose the measurement of whole organ oxygen consumption rate (WOOCR) as a method to assess the quality of kidneys in real time before transplantation. Methods Five porcine kidneys were procured using a donation after cardiac death (DCD) model. The renal artery and renal vein were cannulated and the kidney connected to a custom-made hypothermic machine perfusion (HMP) system equipped with an inline oxygenator and fiber-optic oxygen sensors. Kidneys were perfused at 8°C, and the perfusion parameters and partial oxygen pressures (pO2) were measured to calculate WOOCR. Results Without an inline oxygenator, the pO2 of the perfusion solution at the arterial inlet and venous outlet diminished to near 0 within minutes. However, once adequate oxygenation was provided, a significant pO2 difference was observed and used to calculate the WOOCR. The WOOCR was consistently measured from presumably healthy kidneys, and results suggest that it can be used to differentiate between healthy and purposely damaged organs. Conclusions Custom-made HMP systems equipped with an oxygenator and inline oxygen sensors can be applied for WOOCR measurements. We suggest that WOOCR is a promising approach for the real-time quality assessment of kidneys and other organs during preservation before transplantation. PMID:20692397

  11. Distributed Traffic Control for Reduced Fuel Consumption and Travel Time in Transportation Networks

    Science.gov (United States)

    2018-04-01

    Current technology in traffic control is limited to a centralized approach that has not paid appropriate attention to efficiency of fuel consumption and is subject to the scale of transportation networks. This project proposes a transformative approa...

  12. Associations of Caffeinated Beverage Consumption and Screen Time with Excessive Daytime Sleepiness in Korean High School Students.

    Science.gov (United States)

    Jun, Nuri; Lee, Aeri; Baik, Inkyung

    2017-01-01

    The present study investigated caffeinated beverage consumption and screen time in the association with excessive daytime sleepiness (EDS) and sleep duration. We conducted a cross-sectional study including 249 Korean male high school students. These participants responded to a questionnaire inquiring the information on lifestyle factors, consumption of caffeinated beverages, time spent for screen media, and sleep duration as well as to the Epworth Sleepiness Scale (ESS) questionnaire. EDS was defined as ESS scores of 9 or greater. Students with EDS consumed greater amount of chocolate/cocoa drinks and spent longer time for a TV and a mobile phone than those without EDS (p students with short sleep (≤ 6 hours) consumed greater amount of coffee than others whereas students with long sleep (> 8 hours) consumed greater amount of chocolate/cocoa drinks than others (p sleep duration. Although these findings do not support causal relationships, they suggest that screen time is associated with EDS, but not with sleep duration, and that consumption of certain types of caffeinated beverages is associated with EDS and sleep duration. Adolescents may need to reduce screen time and caffeine consumption to improve sleep quality and avoid daytime sleepiness.

  13. Electricity consumption and economic growth: a time series experience for 17 African countries

    International Nuclear Information System (INIS)

    Wolde-Rufael, Yemane

    2006-01-01

    While the availability of electricity by itself is not a panacea for the economic and social problems facing Africa, the supply of electricity is nevertheless believed to be a necessary requirement for Africa's economic and social development. This paper tests the long-run and causal relationship between electricity consumption per capita and real gross domestic product (GDP) per capita for 17 African countries for the period 1971-2001 using a newly developed cointegration test proposed by Pesaran et al. (2001) and using a modified version of the Granger causality test due to Toda and Yamamoto (1995). The advantage of using these two approaches is that they both avoid the pre-testing bias associated with conventional unit root and cointegration tests. The empirical evidence shows that there was a long-run relationship between electricity consumption per capita and real GDP per capita for only 9 countries and Granger causality for only 12 countries. For 6 countries there was a positive uni-directional causality running from real GDP per capita to electricity consumption per capita; an opposite causality for 3 countries and bi-directional causality for the remaining 3 countries. The result should, however, be interpreted with care as electricity consumption accounts for less than 4% of total energy consumption in Africa and only grid-supplied electricity is taken into account

  14. Correlates of smoking with socioeconomic status, leisure time physical activity and alcohol consumption among Polish adults from randomly selected regions.

    Science.gov (United States)

    Woitas-Slubowska, Donata; Hurnik, Elzbieta; Skarpańska-Stejnborn, Anna

    2010-12-01

    To determine the association between smoking status and leisure time physical activity (LTPA), alcohol consumption, and socioeconomic status (SES) among Polish adults. 466 randomly selected men and women (aged 18-66 years) responded to an anonymous questionnaire regarding smoking, alcohol consumption, LTPA, and SES. Multiple logistic regression was used to examine the association of smoking status with six socioeconomic measures, level of LTPA, and frequency and type of alcohol consumed. Smokers were defined as individuals smoking occasionally or daily. The odds of being smoker were 9 times (men) and 27 times (women) higher among respondents who drink alcohol several times/ week or everyday in comparison to non-drinkers (p times higher compared to those with the high educational attainment (p = 0.007). Among women we observed that students were the most frequent smokers. Female students were almost three times more likely to smoke than non-professional women, and two times more likely than physical workers (p = 0.018). The findings of this study indicated that among randomly selected Polish man and women aged 18-66 smoking and alcohol consumption tended to cluster. These results imply that intervention strategies need to target multiple risk factors simultaneously. The highest risk of smoking was observed among low educated men, female students, and both men and women drinking alcohol several times a week or every day. Information on subgroups with the high risk of smoking will help in planning future preventive strategies.

  15. A chinese puzzle for the chinese government - how is it possible to increase the consumption of motor vehicles while at the same time discouraging energy consumption

    International Nuclear Information System (INIS)

    Allaire, J.

    2005-01-01

    The Chinese automotive market has enjoyed a major upturn over the last few years. This breathtaking growth in the number of motor vehicles brings with it numerous challenges in the energy and climatic fields. In this article, we will examine the various dynamics of the Chinese automotive market since the year 2000. We will seek to present the institutional framework developed by the Chinese authorities for the automotive sector in addition to explaining changes in the marketplace. Finally, we will look at energy questions raised as a result of the rapid growth in the number of motor vehicles in China. Although the Chinese authorities wish to increase the number of vehicles in circulation, at the same time they also wish to limit the energy consumption of the road transport sector. The increased prevalence of diesel engines among the Chinese vehicle fleet has already significantly reduced the energy intensity of Chinese vehicles, but although the central government is demanding low consumption vehicles, obstacles still remain such as the quality of fuel. Finally, we propose a range of forward-looking data or this sector, covering the period up to 2010. (author)

  16. Real time power consumption monitoring for energy efficiency analysis in micro EDM milling

    DEFF Research Database (Denmark)

    Tristo, Gianluca; Bissacco, Giuliano; Lebar, Andrej

    2015-01-01

    for manufacturing sustainability. Electrical discharge machining (EDM) is considered an attractive solution for the manufacturing of microcomponents. In this paper, a low cost and modular data acquisition system, based on open-hardware and open-source software, for online energy consumption monitoring, is presented......Sustainability has become a major concern in many countries and is leading to strict regulations regarding the impact of products and services during their manufacturing, use, and disposal. Power consumption monitoring in manufacturing companies can lead to a reduction of machine tools energy...

  17. Time-varying causality between energy consumption, CO2 emissions, and economic growth: evidence from US states.

    Science.gov (United States)

    Tzeremes, Panayiotis

    2018-02-01

    This study is the first attempt to investigate the relationship between CO 2 emissions, energy consumption, and economic growth at a state level, for the 50 US states, through a time-varying causality approach using annual data over the periods 1960-2010. The time-varying causality test facilitates the better understanding of the causal relationship between the covariates owing to the fact that it might identify causalities when the time-constant hypothesis is rejected. Our findings indicate the existence of a time-varying causality at the state level. Specifically, the results probe eight bidirectional time-varying causalities between energy consumption and CO 2 emission, six cases of two-way time-varying causalities between economic growth and energy consumption, and five bidirectional time-varying causalities between economic growth and CO 2 emission. Moreover, we examine the traditional environmental Kuznets curve hypothesis for the states. Notably, our results do not endorse the validity of the EKC, albeit the majority of states support an inverted N-shaped relationship. Lastly, we can identify multiple policy implications based on the empirical results.

  18. Low to Moderate Average Alcohol Consumption and Binge Drinking in Early Pregnancy: Effects on Choice Reaction Time and Information Processing Time in Five-Year-Old Children.

    Directory of Open Access Journals (Sweden)

    Tina R Kilburn

    Full Text Available Deficits in information processing may be a core deficit after fetal alcohol exposure. This study was designed to investigate the possible effects of weekly low to moderate maternal alcohol consumption and binge drinking episodes in early pregnancy on choice reaction time (CRT and information processing time (IPT in young children.Participants were sampled based on maternal alcohol consumption during pregnancy. At the age of 60-64 months, 1,333 children were administered a modified version of the Sternberg paradigm to assess CRT and IPT. In addition, a test of general intelligence (WPPSI-R was administered.Adjusted for a wide range of potential confounders, this study showed no significant effects of average weekly maternal alcohol consumption during pregnancy on CRT or IPT. There was, however, an indication of slower CRT associated with binge drinking episodes in gestational weeks 1-4.This study observed no significant effects of average weekly maternal alcohol consumption during pregnancy on CRT or IPT as assessed by the Sternberg paradigm. However, there were some indications of CRT being associated with binge drinking during very early pregnancy. Further large-scale studies are needed to investigate effects of different patterns of maternal alcohol consumption on basic cognitive processes in offspring.

  19. Energy consumption in leisure-time activities; Vapaa-ajan harrastuksiin liittyvae energiankulutus

    Energy Technology Data Exchange (ETDEWEB)

    Maentylae, K. [VTT Building Technology, Espoo (Finland); Alppivuori, K. [VTT Communities and Infrastructure, Espoo (Finland)

    1996-12-31

    The purpose of this research is to examine the amount and the structure of direct and indirect energy consumption in connection with leisure occupations at the beginning of the 1990s and to estimate energy saving possibilities connected to these activities. The study deals with 22 activities: going to restaurants, coffee shops, cafeterias, and pubs, going to the theatre, going to the opera, going to ice-hockey matches, going to horse races, going to automobile races, domestic travel, summer cottage use, boating, jogging, cross-country skiing, downhill skiing, ski jumping, ice hockey and other ice sports, swimming in indoor pools, swimming at spas, golf, and car racing. The energy use of individual leisure activities makes up 0,02-1,86 % of Finland`s total annual household energy consumption. Total energy consumption is affected not only by the frequency of an activity but especially by the related need for transportation for an activity. Transportation makes up 20-90 % of the total energy used, and the bulk of this consumption is caused by recreation participants travelling to facilities. The proportion of energy use at the facilities is usually 10-30 %. Recreational equipment require 1-20 %, and activity-related accommodation generally 0-5 % of the total. Activities can be compared to each other on the basis of how much energy is used in one event. By individual choice, consumption related to travel and equipment can be minimized the most. However, individuals have little possibility of influencing the amount of energy used at leisure facilities. (85 refs.)

  20. Excited-State Dynamics of a DNA Duplex in a Deep Eutectic Solvent Probed by Femtosecond Time-Resolved IR Spectroscopy.

    Science.gov (United States)

    de La Harpe, Kimberly; Kohl, Forrest R; Zhang, Yuyuan; Kohler, Bern

    2018-03-08

    To better understand how the solvent influences excited-state deactivation in DNA strands, femtosecond time-resolved IR (fs-TRIR) pump-probe measurements were performed on a d(AT) 9 ·d(AT) 9 duplex dissolved in a deep eutectic solvent (DES) made from choline chloride and ethylene glycol in a 1:2 mol ratio. This solvent, known as ethaline, is a member of a class of ionic liquids capable of solubilizing DNA with minimal disruption to its secondary structure. UV melting analysis reveals that the duplex studied here melts at 18 °C in ethaline compared to 50 °C in aqueous solution. Ethaline has an excellent transparency window that facilitates TRIR measurements in the double-bond stretching region. Transient spectra recorded in deuterated ethaline at room temperature indicate that photoinduced intrastrand charge transfer occurs from A to T, yielding the same exciplex state previously detected in aqueous solution. This state decays via charge recombination with a lifetime of 380 ± 10 ps compared to the 300 ± 10 ps lifetime measured earlier in D 2 O solution. The TRIR data strongly suggest that the long-lived exciplex forms exclusively in the solvated duplex, and not in the denatured single strands, which appear to have little, if any, base stacking. The longer lifetime of the exciplex state in the DES compared to aqueous solution is suggested to arise from reduced stabilization of the charge transfer state, resulting in slower charge recombination on account of Marcus inverted behavior.

  1. Sustainable Consumption

    DEFF Research Database (Denmark)

    Røpke, Inge

    2015-01-01

    The intention of this chapter is to explore the role of consumption and consumers in relation to sustainability transition processes and wider systemic transformations. In contrast to the individualistic focus in much research on sustainable consumption, the embeddedness of consumption activities...... in wider social, economic and technological frameworks is emphasised. In particular, the chapter is inspired by practice theory and transition theory. First, various trends in consumption are outlined to highlight some of the challenges for sustainability transitions. Then, it is discussed how consumption...... patterns are shaped over time and what should be considered in sustainability strategies. While discussions on consumption often take their point of departure in the perspective of the individual and then zoom to the wider context, the present approach is the opposite. The outline starts with the basic...

  2. Reducing Auxiliary Energy Consumption of Heavy Trucks by Onboard Prediction and Real-time Optimization

    OpenAIRE

    Khodabakhshian, Mohammad; Feng, Lei; Börjesson, Stefan; Lindgärde, Olof; Wikander, Jan

    2017-01-01

    The electric engine cooling system, where the coolant pump and the radiator fan are driven by electric motors, admits advanced control methods to decrease auxiliary energy consumption. Recent publications show the fuel saving potential of optimal control strategies for the electric cooling system through offline simulations. These strategies often assume full knowledge of the drive cycle and compute the optimal control sequence by expensive global optimization methods. In reality, the full dr...

  3. Trade Liberalization, Economic Growth, Energy Consumption and the Environment: Time Series Evidence from G-20 Economies

    Directory of Open Access Journals (Sweden)

    Jungho Baek

    2011-03-01

    Full Text Available This study examines the dynamic interrelationships between trade, income growth, energy consumption and CO2 emissions for G-20 economies in a framework of cointegrated vector autoregression (CVAR. Johansen's maximum likelihood procedure is used to estimate the coefficients of the cointegrated VAR. The results show that trade and income growth have a favorable effect on environmental quality for the developed G-20 member countries, while they have an adverse effect on the environment for the developing member countries. We also find that energy con- sumption tends to worsen environmental quality for both the developed and developing countries. Finally, it is found that trade and income to emission and energy causality holds for the developed countries; changes in degree of trade openness and income growth lead to corresponding changes in the rates of growth in emission and energy consumption. Emission and energy to trade and income causality, on the other hand, is found to hold for the developing countries; any shocks in emission and energy consumption cause corresponding fluctuations in income growth and trade openness.

  4. Economic growth and electricity consumption in Cote d'Ivoire: Evidence from time series analysis

    International Nuclear Information System (INIS)

    Kouakou, Auguste K.

    2011-01-01

    This paper examines the causal relationship between the electric power industry and the economic growth of Cote d'Ivoire. Using the data from 1971 to 2008, a test was conducted for the cointegration and Granger causality within an error correction model. Results from these tests reveal a bidirectional causality between per capita electricity consumption and per capita GDP. A unidirectional causality running from electricity consumption to industry value added appears in the short run. Economic growth is found to have great effects on electricity consumption and a reverse causality from electricity to economic growth may also appear. In the long run, there is a unidirectional causality between electricity and both GDP and industry value added. From these findings, we conclude that the country will be energy dependent in the long run and must therefore secure the production network from shortfalls to ensure a sustainable development path. Accordingly, government should adopt policies aimed at increasing the investment in the sector by stepping up electricity production from existing and new energy sources. - Highlights: → We analyze the electricity-growth nexus for Cote d'Ivoire using causality tests. → Short run bi-directional causality appears between electricity and GDP. → We found a unidirectional causality running from electricity to industry and GDP. → Economic activities are electricity dependent and require appropriate policies.

  5. The use of process information for verification of inventory in solvent extraction contactors in near-real-time accounting for reprocessing plants

    International Nuclear Information System (INIS)

    Hakkila, E.A.; Barnes, J.W.; Hafer, J.F.

    1988-01-01

    Near-real-time accounting is being studied as a technique for improving the timeliness of accounting in nuclear fuel reprocessing plants. A major criticism of near-real-time accounting is perceived disclosure of proprietary data for IAEA verification, particularly in verifying the inventory of solvent extraction contractors. This study indicates that the contribution of uncertainties in estimating the inventory of pulsed columns or mixer settlers may be insignificant compared to uncertainties in measured throughput and measurable inventory for most reprocessing plants, and verification may not be a serious problem. Verification can become a problem for plants with low throughput and low inventory in tasks if contactor inventory variations or uncertainties are greater than --25%. Each plant must be evaluated with respect to its specific inventory and throughput characteristics

  6. Design and Validation of Real-Time Optimal Control with ECMS to Minimize Energy Consumption for Parallel Hybrid Electric Vehicles

    Directory of Open Access Journals (Sweden)

    Aiyun Gao

    2017-01-01

    Full Text Available A real-time optimal control of parallel hybrid electric vehicles (PHEVs with the equivalent consumption minimization strategy (ECMS is presented in this paper, whose purpose is to achieve the total equivalent fuel consumption minimization and to maintain the battery state of charge (SOC within its operation range at all times simultaneously. Vehicle and assembly models of PHEVs are established, which provide the foundation for the following calculations. The ECMS is described in detail, in which an instantaneous cost function including the fuel energy and the electrical energy is proposed, whose emphasis is the computation of the equivalent factor. The real-time optimal control strategy is designed through regarding the minimum of the total equivalent fuel consumption as the control objective and the torque split factor as the control variable. The validation of the control strategy proposed is demonstrated both in the MATLAB/Simulink/Advisor environment and under actual transportation conditions by comparing the fuel economy, the charge sustainability, and parts performance with other three control strategies under different driving cycles including standard, actual, and real-time road conditions. Through numerical simulations and real vehicle tests, the accuracy of the approach used for the evaluation of the equivalent factor is confirmed, and the potential of the proposed control strategy in terms of fuel economy and keeping the deviations of SOC at a low level is illustrated.

  7. Alcohol consumption among first-time mothers and the risk of preterm birth: a cohort study.

    Science.gov (United States)

    Dale, Maria T G; Bakketeig, Leiv S; Magnus, Per

    2016-04-01

    Our aim was to explore the association between alcohol consumption, before and during pregnancy, and the risk of preterm birth among 46,252 primiparous mothers. We obtained information on alcohol consumption from questionnaire responses at pregnancy week 15 from the prospective, observational Norwegian Mother and Child Cohort Study. Data on preterm birth, categorized as delivery before gestation week 37, were retrieved from the Medical Birth Registry of Norway. Among the participants, 91% consumed alcohol before pregnancy and fewer than 20% reported consuming alcohol during pregnancy. The adjusted odds ratio (aOR) for preterm birth associated with prepregnancy alcohol consumption was 0.81 (95% confidence interval [CI], 0.70-0.95). We did not find a risk reduction for overall drinking during pregnancy, aOR = 1.03 (95% CI, 0.90-1.19). However, dose-response analyses showed tendencies toward adverse effects when drinking 1-3 times per month during the first 15 weeks of pregnancy, aOR = 1.51 (95% CI, 1.14-2.00). We did not find any effects of alcohol consumption during pregnancy, whereas pre-pregnancy drinking was associated with reduced risk of preterm birth. Residual confounding may have influenced the risk estimates, especially before pregnancy, as nondrinkers have lower socioeconomic status and well-being than drinkers. Copyright © 2016 Elsevier Inc. All rights reserved.

  8. Time trends in leisure time physical activity, smoking, alcohol consumption and body mass index in Danish adults with and without COPD

    DEFF Research Database (Denmark)

    Hansen, Henrik; Johnsen, Nina Føns; Molsted, Stig

    2016-01-01

    Background: Promotion of a healthy lifestyle and non-pharmacological interventions in the treatment of chronic obstructive pulmonary disease (COPD) has received great attention in recent decades. The aim of this study was to investigate trends in leisure time physical activity (PA), smoking......, alcohol consumption and body mass index (BMI) from 2000 to 2010 in Danish individuals with and without COPD. Methods: Analyses were based on data provided by The Danish Health and Morbidity's three cross-sectional surveys from 2000, 2005 and 2010. Data compromised level of leisure time PA, smoking......, alcohol consumption, BMI and sociodemographic characteristics. Participants aged 25 years or older with and without COPD were included in the analyses. Results: In multiple logistic regression analyses, odds ratio (OR) of being physically active in the leisure time in 2010 compared to 2000 was 1.70 (95...

  9. The pursuit of new role: A study of luxury products consumption during the liminal transition into first time employment

    OpenAIRE

    Chucherd, Sunong

    2008-01-01

    Consumer behaviour research on role transition has so far been limited to the negative life changes and the changes-specific consequences towards the consumption pattern. Moreover, although young adult customers have recently been the new target customer for many luxury brands, no research has been conducted concerning the impacts of role transition during the transition into first-time employment and the role of luxury products in dealing with those effects. Liminal transition is also a new ...

  10. Time-varying analysis of CO_2 emissions, energy consumption, and economic growth nexus: Statistical experience in next 11 countries

    International Nuclear Information System (INIS)

    Shahbaz, Muhammad; Mahalik, Mantu Kumar; Shah, Syed Hasanat; Sato, João Ricardo

    2016-01-01

    This paper detects the direction of causality among carbon dioxide (CO_2) emissions, energy consumption, and economic growth in Next 11 countries for the period 1972–2013. Changes in economic, energy, and environmental policies as well as regulatory and technological advancement over time, cause changes in the relationship among the variables. We use a novel approach i.e. time-varying Granger causality and find that economic growth is the cause of CO_2 emissions in Bangladesh and Egypt. Economic growth causes energy consumption in the Philippines, Turkey, and Vietnam but the feedback effect exists between energy consumption and economic growth in South Korea. In the cases of Indonesia and Turkey, we find the unidirectional time-varying Granger causality running from economic growth to CO_2 emissions thus validates the existence of the Environmental Kuznets Curve hypothesis, which indicates that economic growth is achievable at the minimal cost of environment. The paper gives new insights for policy makers to attain sustainable economic growth while maintaining long-run environmental quality.

  11. Time series analytics using sliding window metaheuristic optimization-based machine learning system for identifying building energy consumption patterns

    International Nuclear Information System (INIS)

    Chou, Jui-Sheng; Ngo, Ngoc-Tri

    2016-01-01

    Highlights: • This study develops a novel time-series sliding window forecast system. • The system integrates metaheuristics, machine learning and time-series models. • Site experiment of smart grid infrastructure is installed to retrieve real-time data. • The proposed system accurately predicts energy consumption in residential buildings. • The forecasting system can help users minimize their electricity usage. - Abstract: Smart grids are a promising solution to the rapidly growing power demand because they can considerably increase building energy efficiency. This study developed a novel time-series sliding window metaheuristic optimization-based machine learning system for predicting real-time building energy consumption data collected by a smart grid. The proposed system integrates a seasonal autoregressive integrated moving average (SARIMA) model and metaheuristic firefly algorithm-based least squares support vector regression (MetaFA-LSSVR) model. Specifically, the proposed system fits the SARIMA model to linear data components in the first stage, and the MetaFA-LSSVR model captures nonlinear data components in the second stage. Real-time data retrieved from an experimental smart grid installed in a building were used to evaluate the efficacy and effectiveness of the proposed system. A k-week sliding window approach is proposed for employing historical data as input for the novel time-series forecasting system. The prediction system yielded high and reliable accuracy rates in 1-day-ahead predictions of building energy consumption, with a total error rate of 1.181% and mean absolute error of 0.026 kW h. Notably, the system demonstrates an improved accuracy rate in the range of 36.8–113.2% relative to those of the linear forecasting model (i.e., SARIMA) and nonlinear forecasting models (i.e., LSSVR and MetaFA-LSSVR). Therefore, end users can further apply the forecasted information to enhance efficiency of energy usage in their buildings, especially

  12. Concept of the Interactive Platform for Real Time Energy Consumption Analysis in the Complex Urban Environment

    Directory of Open Access Journals (Sweden)

    Ales Podgornik

    2015-03-01

    Full Text Available This paper presents a concept of interactive and comprehensive platform based on advanced metering infrastructure for exchanging information on energy consumption and consequently on energy efficiency in urban and industrial environment which can serve as powerful tool for monitoring of progress in transition toward low carbon society. Proposed concept aims at supporting energy utilities in optimizing energy performance of both supply and demand side aspect of their work and have a potential to fill the gap and help in harmonization of interests between the energy utilities, energy service providers, local energy agencies and citizens. The proposed concept should be realized as a platform with the modular architecture, allowing future expansion of user’s portfolio and inventory management (new energy efficiency measures, technologies, different industries, urban districts and regions.

  13. Investigation of different wall profiles on energy consumption and baking time in domestic ovens

    Directory of Open Access Journals (Sweden)

    Onbasioglu S. U.

    2013-04-01

    Full Text Available This present study, has aimed to examine and improve the momentum and heat transport mechanism in a domestic oven. At the beginning, the experimental study has been carried out in the oven that analyzing heat transfer behavior of the oven. During the preparation and procedure of the energy consumption experiments, standards determined in EN 50304 had been used. In addition to experimental results, the numerical simulation has showed that increasing diffusion over the walls and advection in the center, the performance of the oven can be improved. Using this idea, two different models have been set up in the oven walls and have been experimentally and numerically studied. Finally, the results have been compared with the original case that validates the initial idea by improving the performance of the oven.

  14. Quantitative evaluation of time-series GHG emissions by sector and region using consumption-based accounting

    International Nuclear Information System (INIS)

    Homma, Takashi; Akimoto, Keigo; Tomoda, Toshimasa

    2012-01-01

    This study estimates global time-series consumption-based GHG emissions by region from 1990 to 2005, including both CO 2 and non-CO 2 GHG emissions. Estimations are conducted for the whole economy and for two specific sectors: manufacturing and agriculture. Especially in the agricultural sector, it is important to include non-CO 2 GHG emissions because these are the major emissions present. In most of the regions examined, the improvements in GHG intensities achieved in the manufacturing sector are larger than those in the agricultural sector. Compared with developing regions, most developed regions have consistently larger per-capita consumption-based GHG emissions over the whole economy, as well as higher production-based emissions. In the manufacturing sector, differences calculated by subtracting production-based emissions from consumption-based GHG emissions are determined by the regional economic level while, in the agricultural sector, they are dependent on regional production structures that are determined by international trade competitiveness. In the manufacturing sector, these differences are consistently and increasingly positive for the U.S., EU15 and Japan but negative for developing regions. In the agricultural sector, the differences calculated for the major agricultural importers like Japan and the EU15 are consistently positive while those of exporters like the U.S., Australia and New Zealand are consistently negative. - Highlights: ► We evaluate global time-series production-based and consumption-based GHG emissions. ► We focus on both CO 2 and non-CO 2 GHG emissions, broken down by region and by sector. ► Including non-CO 2 GHG emissions is important in agricultural sector. ► In agriculture, differences in accountings are dependent on production structures. ► In manufacturing sector, differences in accountings are determined by economic level.

  15. Hierarchical structure of the energy landscape of proteins revisited by time series analysis. II. Investigation of explicit solvent effects

    Science.gov (United States)

    Alakent, Burak; Camurdan, Mehmet C.; Doruker, Pemra

    2005-10-01

    Time series analysis tools are employed on the principal modes obtained from the Cα trajectories from two independent molecular-dynamics simulations of α-amylase inhibitor (tendamistat). Fluctuations inside an energy minimum (intraminimum motions), transitions between minima (interminimum motions), and relaxations in different hierarchical energy levels are investigated and compared with those encountered in vacuum by using different sampling window sizes and intervals. The low-frequency low-indexed mode relationship, established in vacuum, is also encountered in water, which shows the reliability of the important dynamics information offered by principal components analysis in water. It has been shown that examining a short data collection period (100ps) may result in a high population of overdamped modes, while some of the low-frequency oscillations (memory: future conformations are less dependent on previous conformations due to the lowering of energy barriers in hierarchical levels of the energy landscape. In short-time dynamics (sight contradicts. However, this comes about because water enhances the transitions between minima and forces the protein to reduce its already inherent inability to maintain oscillations observed in vacuum. Some of the frequencies lower than 10cm-1 are found to be overdamped, while those higher than 20cm-1 are slightly increased. As for the long-time dynamics in water, it is found that random-walk motion is maintained for approximately 200ps (about five times of that in vacuum) in the low-indexed modes, showing the lowering of energy barriers between the higher-level minima.

  16. The transformation of the consumption of cultural goods in private households over time: study of Canoas between 2000 and 2010

    Directory of Open Access Journals (Sweden)

    Judite Sanson Bem

    2012-12-01

    Full Text Available People, over time, change their consumption habits, among these preference changes are included the choice of cultural goods. Among the reasons for this change are the prices, the consumer age, income, education, and others. Canoas’ private households residents, municipality located in the metropolitan area of Porto Alegre, not fled to the rule during the decade of 2000, with behaviors that are similar to the consumers of Rio Grande do Sul state. The aim of this work is to study the cultural goods consumption behavior in permanent private households of Canoas in the period in 2000 and 2010. First, the authors outline the good cultural concepts and theories about the consumption of cultural goods from the standpoint of the economy. After the second stage, we use descriptive statistics to present the 2010 IBGE Census data and 2000 that have the presence of cultural goods and services of permanent households of Canoas, making a comparison with the Rio State Grande do Sul ( RS . It follows that the municipality followed the state moves, but in the period presented a higher percentage of households with assets of greater intensity of technology such as computers and mobile phones.

  17. Time perspectives and convenience food consumption among teenagers in Vietnam: The dual role of hedonic and healthy eating values.

    Science.gov (United States)

    Olsen, Svein Ottar; Tuu, Ho Huy

    2017-09-01

    This study uses the subscales of Consideration of Future Consequences (CFC) to explore the effects of future (CFC-future) and immediate (CFC-immediate) on convenience food consumption among teenagers in Vietnam. Furthermore, we investigate the mediating and dual role of hedonic and healthy eating values in the relationships between CFCs and convenience food consumption. Survey data from 451 teenagers in Central Vietnam and structural equation modelling were used to test the relationships in a proposed theoretical model. The results indicate that while CFC-immediate and hedonic eating value has a positive direct effect, CFC-future and healthy eating value has a negative direct effect on convenience food consumption. The findings also reveal that both CFC-immediate and CFC-future have positive effects on hedonic and healthy eating values. However, this study argues and tests the relative importance of the direct (asymmetric) effects of time perspectives on eating values, and finds that while CFC-future dominate in explaining healthy eating values, CFC-immediate dominate in explaining hedonic eating values. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. Association between time perspective and organic food consumption in a large sample of adults.

    Science.gov (United States)

    Bénard, Marc; Baudry, Julia; Méjean, Caroline; Lairon, Denis; Giudici, Kelly Virecoulon; Etilé, Fabrice; Reach, Gérard; Hercberg, Serge; Kesse-Guyot, Emmanuelle; Péneau, Sandrine

    2018-01-05

    Organic food intake has risen in many countries during the past decades. Even though motivations associated with such choice have been studied, psychological traits preceding these motivations have rarely been explored. Consideration of future consequences (CFC) represents the extent to which individuals consider future versus immediate consequences of their current behaviors. Consequently, a future oriented personality may be an important characteristic of organic food consumers. The objective was to analyze the association between CFC and organic food consumption in a large sample of the adult general population. In 2014, a sample of 27,634 participants from the NutriNet-Santé cohort study completed the CFC questionnaire and an Organic-Food Frequency questionnaire. For each food group (17 groups), non-organic food consumers were compared to organic food consumers across quartiles of the CFC using multiple logistic regressions. Moreover, adjusted means of proportions of organic food intakes out of total food intakes were compared between quartiles of the CFC. Analyses were adjusted for socio-demographic, lifestyle and dietary characteristics. Participants with higher CFC were more likely to consume organic food (OR quartile 4 (Q4) vs. Q1 = 1.88, 95% CI: 1.62, 2.20). Overall, future oriented participants were more likely to consume 14 food groups. The strongest associations were observed for starchy refined foods (OR = 1.78, 95% CI: 1.63, 1.94), and fruits and vegetables (OR = 1.74, 95% CI: 1.58, 1.92). The contribution of organic food intake out of total food intake was 33% higher in the Q4 compared to Q1. More precisely, the contribution of organic food consumed was higher in the Q4 for 16 food groups. The highest relative differences between Q4 and Q1 were observed for starchy refined foods (22%) and non-alcoholic beverages (21%). Seafood was the only food group without a significant difference. This study provides information on the personality of

  19. 21 CFR 173.280 - Solvent extraction process for citric acid.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Solvent extraction process for citric acid. 173.280... HUMAN CONSUMPTION Solvents, Lubricants, Release Agents and Related Substances § 173.280 Solvent extraction process for citric acid. A solvent extraction process for recovery of citric acid from...

  20. Dielectric dispersion and thermodynamic behavior of stearic acid binary mixtures with alcohol as co-solvent using time domain reflectometry

    Directory of Open Access Journals (Sweden)

    M. Maria Sylvester

    2017-08-01

    Full Text Available Dielectric permittivity and relaxation dynamics of binary and ternary mixture of stearic acid on various concentration and their thermodynamic effects are studied. The static dielectric constant (ε0, dielectric permittivity (ε′ and dielectric loss (ε′′ are found by bilinear calibration. The relaxation time (τ, dielectric strength (Δε and the excess permittivity (εE are found. The thermodynamic parameters such as enthalpy (ΔH, entropy (ΔS and Gibb’s free energy (ΔG are evolved. The significant changes in dielectric parameters are due to the intramolecular and intermolecular interactions in response to the applied frequency. The permittivity spectra of stearic acid–alcohol in the frequency range of 10MHz to 30GHz have been measured using picoseconds Time Domain Reflectometry (TDR. The dielectric parameters (ε0, ε′, ε′′ are found by bilinear calibration method. Influence of temperature in intermolecular interaction and the relaxation process are also studied. The FT-IR spectral analysis reveals that the conformation of functional groups and formation for hydrogen bonding are present in both binary and ternary mixtures of stearic acid.

  1. A descriptive retrospective study of time consumption in home care services: how do employees use their working time?

    Science.gov (United States)

    Holm, Solrun G; Angelsen, Ragnhild O

    2014-09-26

    Home care services in Norway are provided for free, and municipalities are responsible for their provision to all those in need of them, in accordance with the Act on Municipal Health and Care Services. The costs of home care services are increasing. Many municipalities are now working to find the best cost-effective solutions to ensure that home care services are of sufficient quality but still affordable. This paper describes how nurses and health workers spend their working time, with a hypothesis that driving time and time required to document details of the care given are underestimated in weekly planning schedules. This article sets out a descriptive retrospective study of day-schedules and driving routes for staff working in home care services. Data were analyzed using GIS. The driving time was between 18% and 26% of working time in municipality A, and between 21% and 23% in municipality B. Visiting time varied between 44% and 62% in municipality A, and 40% and 56% in municipality B. Other tasks, including the legally-required documentation of the care given, varied between 19% and 32% in municipality A and 21% and 38% in municipality B. Overall, 22% of the driving routes in municipality A, and 14% in municipality B, took more time than expected. In municipality A, 22% of the day-schedules underestimated overtime; this figure was 14% in municipality B. In home care services, time taken for driving and to write statutory documentation seems to have been underestimated. Better planning and organization of driving routes would reduce driving time and allow more time for other necessary work.

  2. A Real-Time Energy Consumption Simulation and Comparison of Buildings in Different Construction Years in the Olympic Central Area in Beijing

    Directory of Open Access Journals (Sweden)

    Chen Xu

    2017-12-01

    Full Text Available Energy consumed the in urban sector accounts for a large proportion of total world delivered energy consumption. Residential building energy consumption is an important part of urban energy consumption. However, there are few studies focused on this issue and that have simulated the energy consumption of residential buildings using questionnaire data. In this research, an eQUEST study was conducted for different residential buildings in the Olympic Central Area in Beijing. Real-time meteorological observation data and an actual energy consumption schedule generated by questionnaire data were used to improve the eQUEST model in the absence of actual energy consumption data. The simulated total energy consumption of residential buildings in the case area in 2015 is 21,262.28 tce, and the average annual energy consumption per unit area is 20.09 kgce/(m2·a. Space heating accounted for 45% of the total energy consumption as the highest proportion, and the second highest was household appliances, which accounted for 20%. The results showed that old residential buildings, multi-storey buildings and large-sized apartment buildings consume more energy. The internal units, building height, per capita construction area, the number of occupants and length of power use had significant impact on residential energy consumption. The result of this study will provide practical reference for energy saving reconstruction of residential buildings in Beijing.

  3. Is identification of smoking, risky alcohol consumption and overweight and obesity by General Practitioners improving? A comparison over time.

    Science.gov (United States)

    Bryant, Jamie; Yoong, Sze Lin; Sanson-Fisher, Rob; Mazza, Danielle; Carey, Mariko; Walsh, Justin; Bisquera, Alessandra

    2015-12-01

    Detection of lifestyle risk factors by GPs is the first step required for intervention. Despite significant investment in preventive health care in general practice, little is known about whether GP detection of lifestyle risk factors have improved over time. To examine whether sensitivity and specificity of GP detection of smoking, risky alcohol consumption and overweight and obesity has increased in patients presenting to see their GP, by comparing results from four Australian studies conducted between 1982 and 2011. Demographic characteristics of patient and GP samples and the prevalence, sensitivity and specificity of detection of each risk factor were extracted from published studies. Differences between GP and patient sample characteristics were examined. To identify trends over time in prevalence of risk factors, sensitivity and specificity of detection across studies and the Cochran-Armitage test for trend were calculated for each risk factor for the overall sample and by male and female subgroups. There were no statistically significant changes in the sensitivity of GP detection of smoking or overweight or obesity over time. Specificity of detection of smoking increased from 64.7% to 98% (P investment to increase GP detection and intervention for lifestyle risk factors, accurate detection of smoking, risky alcohol consumption and overweight and obesity occurs for less than two-thirds of all patients. © The Author 2015. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  4. Time Trends in Fast Food Consumption and Its Association with Obesity among Children in China.

    Directory of Open Access Journals (Sweden)

    Hong Xue

    Full Text Available Study the trends in Western fast food consumption (FFC among Chinese school-age children and the association between FFC and obesity using nationwide survey data.Cross-sectional and longitudinal analyses were conducted to study the trends in FFC and the associations between FFC and weight status (overweight, obesity and body mass index (BMI z-score.Longitudinal data from families were collected in the 2004 and 2009 China Health and Nutrition Survey (covering nine provinces throughout China.The analysis included 2656 Chinese children aged 6 to 18 years (1542 and 1114 children in the 2004 and 2009 survey, respectively.FFC (reported having consumed Western fast food in the past three months has increased between 2004 and 2009, from 18.5% to 23.9% in those aged 6-18, and increased more rapidly among those aged 13-17, from 17.9% to 26.3%. The increase was significant in almost all groups by age, sex, family income, and residence. Our cross-sectional and longitudinal analyses did not detect a significant association between FFC and obesity/overweight or BMI z-score (e.g., for BMI z-score, boys: β = 0.02, 95% CI: -0.71, 0.75; girls: β = -0.14, 95% CI: -1.03, 0.75.FFC has increased in Chinese school-age children, especially in older children, boys, and those from low- and medium-income families, rural areas, and East China, but decreased among those from high-income families during 2004-2009. The data did not show a significant association between FFC and obesity.

  5. Time Trends in Fast Food Consumption and Its Association with Obesity among Children in China.

    Science.gov (United States)

    Xue, Hong; Wu, Yang; Wang, Xiaoyu; Wang, Youfa

    2016-01-01

    Study the trends in Western fast food consumption (FFC) among Chinese school-age children and the association between FFC and obesity using nationwide survey data. Cross-sectional and longitudinal analyses were conducted to study the trends in FFC and the associations between FFC and weight status (overweight, obesity and body mass index (BMI) z-score). Longitudinal data from families were collected in the 2004 and 2009 China Health and Nutrition Survey (covering nine provinces throughout China). The analysis included 2656 Chinese children aged 6 to 18 years (1542 and 1114 children in the 2004 and 2009 survey, respectively). FFC (reported having consumed Western fast food in the past three months) has increased between 2004 and 2009, from 18.5% to 23.9% in those aged 6-18, and increased more rapidly among those aged 13-17, from 17.9% to 26.3%. The increase was significant in almost all groups by age, sex, family income, and residence. Our cross-sectional and longitudinal analyses did not detect a significant association between FFC and obesity/overweight or BMI z-score (e.g., for BMI z-score, boys: β = 0.02, 95% CI: -0.71, 0.75; girls: β = -0.14, 95% CI: -1.03, 0.75). FFC has increased in Chinese school-age children, especially in older children, boys, and those from low- and medium-income families, rural areas, and East China, but decreased among those from high-income families during 2004-2009. The data did not show a significant association between FFC and obesity.

  6. Time Trends in Fast Food Consumption and Its Association with Obesity among Children in China

    Science.gov (United States)

    Wang, Xiaoyu; Wang, Youfa

    2016-01-01

    Objective Study the trends in Western fast food consumption (FFC) among Chinese school-age children and the association between FFC and obesity using nationwide survey data. Design Cross-sectional and longitudinal analyses were conducted to study the trends in FFC and the associations between FFC and weight status (overweight, obesity and body mass index (BMI) z-score). Setting Longitudinal data from families were collected in the 2004 and 2009 China Health and Nutrition Survey (covering nine provinces throughout China). Subjects The analysis included 2656 Chinese children aged 6 to 18 years (1542 and 1114 children in the 2004 and 2009 survey, respectively). Results FFC (reported having consumed Western fast food in the past three months) has increased between 2004 and 2009, from 18.5% to 23.9% in those aged 6–18, and increased more rapidly among those aged 13–17, from 17.9% to 26.3%. The increase was significant in almost all groups by age, sex, family income, and residence. Our cross-sectional and longitudinal analyses did not detect a significant association between FFC and obesity/overweight or BMI z-score (e.g., for BMI z-score, boys: β = 0.02, 95% CI: -0.71, 0.75; girls: β = -0.14, 95% CI: -1.03, 0.75). Conclusions FFC has increased in Chinese school-age children, especially in older children, boys, and those from low- and medium-income families, rural areas, and East China, but decreased among those from high-income families during 2004–2009. The data did not show a significant association between FFC and obesity. PMID:26974536

  7. Post-ischaemic changes in the response time of oxygen consumption to demand in the isolated rat heart are mediated partly by calcium and glycolysis

    NARCIS (Netherlands)

    Zuurbier, C. J.; Ince, C.

    2002-01-01

    This study examined whether different durations of ischaemia (I) and reperfusion (R) altered the kinetics of O-2 consumption-to-demand matching and the contribution of changes in calcium and metabolic pathways to possible alterations. The response time of mitochondrial O-2 consumption (t(mito)) to a

  8. Has Underreporting of Cigarette Consumption Changed Over Time? Estimates Derived From US National Health Surveillance Systems Between 1965 and 2015.

    Science.gov (United States)

    Liber, Alex C; Warner, Kenneth E

    2018-01-01

    According to survey data, the prevalence of Americans' self-reported cigarette smoking is dropping steadily. However, the accuracy of national surveys has been questioned because of declining response rates and the increasing stigmatization of smoking. We used data from 2 repeated, cross-sectional, nationally representative health surveys (National Survey on Drug Use and Health (NSDUH), 1979-2014; and National Health Interview Survey (NHIS), 1965-2015) to determine whether self-reported cigarette consumption has changed over time as a proportion of federally taxed cigarette sales. From each survey, we calculated national equivalents of annual cigarette consumption. From 1979 to 1997, the amount of cigarettes that NSDUH and NHIS respondents reported corresponded to an average of 59.5% (standard deviation (SD), 2.3%) and 65.6% (SD, 3.2%), respectively, of taxed cigarette sales. After 1997, respondents' reported smoking data corresponded to the equivalent of an average of 64.2% (SD, 5.9%) and 63.3% (SD, 2.5%), respectively, of taxed cigarette sales. NHIS figures remained steady throughout the latter period, with a decline during 2013-2015 from 65.9% to 61.1%. NSDUH figures increased steadily, exceeding those of the NHIS after 2002. Given the consistent underreporting of cigarette consumption over time, these surveys are likely not less accurate than they were previously. The recent decrease in NHIS accuracy, however, gives pause about the magnitude of the reported decline in smoking prevalence in 2014 and 2015. Improvement in the accuracy of NSDUH data is encouraging. © The Author(s) 2017. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  9. Who gains from hourly time-of-use retail prices on electricity? An analysis of consumption profiles for categories of Danish electricity customers

    DEFF Research Database (Denmark)

    Møller Andersen, Frits; Larsen, Helge V.; Kitzing, Lena

    2014-01-01

    include a systematic component in the hourly variation, we show that customers with different consumption profiles experience different average cost of their electricity consumption when billed according to hourly time-of-use prices. Thus, some categories of customers stand to gain from time......Studies of the aggregated hourly electricity load in geographical areas typically show a systematic variation over the day, the week, and seasons. With hourly metering of individual customers, data for individual consumption profiles have become available. Looking into these data we show...... that consumption profiles for specific categories of customers are equally systematic but quite distinct for different categories of customers. That is, different categories of customers contribute quite differently to the aggregated load profile. Coupling consumption profiles with hourly market prices which also...

  10. Consumption estimation in system design for real time embedded applications; Estimation de la consommation dans la conception systeme des applications embarquees temps reel

    Energy Technology Data Exchange (ETDEWEB)

    Laurent, J.

    2002-12-15

    Today, power and energy consumption have become, as time and area, an important constraint when you design a system. Indeed modern applications use more and more processing and memory resources so these lead a significant increase of consumption. Furthermore, embedded software impact is preponderant in real time system so the code optimisation has a great impact onto the consumption constraint. Several research teams have already developed estimation methodologies for processor but almost are at instruction level (ILPA). With this kind of method you have to measure the consumption of each instruction of the instruction set and also the inter-instruction consumption overhead. For complex architecture, this kind of methodology is not adapted due to the prohibitive number of consumption measures. So the characterisation time of this kind of architecture is too important furthermore with this method is very difficult to take into account the external environment. For actual architecture another method is needed to reduce the characterisation time while preserving the accuracy. The reduction of the characterisation time have to be realized by increasing the abstraction level. So, we propose here a new approach based on a functional and architectural analysis of the target in consumption point of view (FLPA). Our methodology has two steps: the first one is a modeling step and the second is estimation step. (author)

  11. Run-time Adaptable VLIW Processors : Resources, Performance, Power Consumption, and Reliability Trade-offs

    NARCIS (Netherlands)

    Anjam, F.

    2013-01-01

    In this dissertation, we propose to combine programmability with reconfigurability by implementing an adaptable programmable VLIW processor in a reconfigurable hardware. The approach allows applications to be developed at high-level (C language level), while at the same time, the processor

  12. Household Consumption and Savings Around the Time of Births and the Role of Education

    NARCIS (Netherlands)

    Kalwij, A.S.

    2003-01-01

    This study examines households’ financial situation around the time of births using a panel of Dutch households over the period 1987-1993. I find that at all levels of education households accumulate wealth before and draw on their liquid savings after having given birth to their first child.

  13. Household consumption and savings around the time of births and the role of education.

    NARCIS (Netherlands)

    Kalwij, A.S.

    2003-01-01

    This study examines households’ financial situation around the time of births using a panel of Dutch households over the period 1987-1993. I find that at all levels of education households accumulate wealth before and draw on their liquid savings after having given birth to their first child.

  14. Products cooked in preheated versus non-preheated ovens. Baking times, calculated energy consumption, and product quality compared.

    Science.gov (United States)

    Odland, D; Davis, C

    1982-08-01

    Plain muffins, yellow cake, baked custard, apple pie, tuna casserole, frozen tuna casserole, cheese soufflé, and meat loaf were baked in preheated and non-preheated standard gas, continuous-clean gas, standard electric, and self-cleaning electric ovens. Products generally required 5 min. or less extra baking time when cooked in non-preheated rather than in preheated ovens. The variability in baking times often was less between preheated and non-preheated ovens than among oven types. Calculated energy consumption values showed that usually less energy was required to bake products in non-preheated than in preheated ovens; savings averaged about 10 percent. Few significant differences were found in physical measurements or eating quality either between preheated and non-preheated ovens or among oven types. Overall, for the products tested, findings confirmed that preheating the oven is not essential for good product quality and, therefore, is an unnecessary use of energy.

  15. Trends in leisure time physical activity, smoking, body mass index and alcohol consumption in Danish adults with and without diabetes

    DEFF Research Database (Denmark)

    Molsted, Stig; Johnsen, Nina Føns; Snorgaard, Ole

    2014-01-01

    AIMS: In recent decades there has been an increased focus on non-pharmacological treatment of diabetes. The aim of this study was to investigate trends in leisure time physical activity (PA), smoking, body mass index (BMI), and alcohol consumption reported in 2000, 2005 and 2010 by Danish subjects......-sectional analyses from 2000, 2005 and 2010. RESULTS: In participants with diabetes, leisure time PA levels increased from 2000 to 2010: The percentage of those that were physically active increased from 53.5% to 78.2% (p... in participants with diabetes compared to participants without diabetes throughout the study. CONCLUSIONS: The percentage of physically active Danish participants older than 45 years with diabetes increased from 2000 to 2010, and the most beneficial trends in life style were observed among the women. These trends...

  16. Solvents and solvent effects in organic chemistry

    National Research Council Canada - National Science Library

    Reichardt, C; Welton, T

    2011-01-01

    .../guest complexation equilibria and reactions in biphasic solvent systems and neoteric solvents, respectively. More than 900 new references have been added, giving preference to review articles, and many older ones have been deleted. New references either replace older ones or are added to the end of the respective reference list of each chapter. Th...

  17. Synergic solventing-out crystallization with subsequent time-delay thermal annealing of PbI2 precursor in mesostructured perovskite solar cells

    Science.gov (United States)

    Jia, Fujin; Guo, Yanqun; Che, Lijia; Liu, Zhiyong; Zeng, Zhigang; Cai, Chuanbing

    2018-06-01

    Although the two-step sequential deposition method provides an efficient route to fabricate high performance perovskite solar cells (PSSCs) with increasing reproducibility, the inefficient and incomplete conversion of PbI2 to perovskite is still quite a challenge. Following pioneering works, we found that the conversion process from PbI2 to perovskite mainly involves diffusion, infiltration, contact and reaction. In order to facilitate the conversion from PbI2 to perovskite, we demonstrate an effective method to regulate supersaturation level (the driving force to crystallization) of PbI2 by solventing-out crystallization combining with subsequent time-delay thermal annealing of PbI2 wet film. Enough voids and spaces in resulting porous PbI2 layer will be in favor of efficient diffusion, infiltration of CH3NH3I solution, and further enhance the contact and reaction between PbI2 and CH3NH3I in the whole film, leading to rapid, efficient and complete perovskite conversion with a conversion level of about 99.9%. Enhancement of light harvesting ranging from visible to near-IR region was achieved for the resultant high-quality perovskite. Upon this combined method, the fabricated mesostructured solar cells show tremendous power conversion efficiency (PCE) improvement from 3.2% to about 12.3% with less hysteresis owing to the simultaneous enhancement of short-circuit photocurrent density (J sc), open-circuit voltage (V oc) and fill factor (FF).

  18. Organic Solvent Tropical Report

    International Nuclear Information System (INIS)

    COWLEY, W.L.

    2000-01-01

    This report provides the basis for closing the organic solvent safety issue. Sufficient information is presented to conclude that risk posed by an unmitigated organic solvent fire is within risk evaluation guidelines

  19. Canyon solvent cleaning

    International Nuclear Information System (INIS)

    Reif, D.J.

    1986-01-01

    The HM Process at the Savannah River Plant (SRP) uses 7.5% tributylphosphate in n-paraffin as an extraction solvent. During use, the solvent is altered due to hydrolysis and radiolysis, forming materials that influence product losses, produce decontamination, and separation efficiencies. Laboratory studies to improve online solvent cleaning have shown the carbonate washing, although removing residual solvent activity does not remove binding ligands that hold fission products in the solvent. Treatment of solvent by an alumina adsorption process removes binding ligands and significantly improves recycle solvent performance. Both laboratory work defining a full-scale alumina adsorption process and the use of the process to clean HM Process first cycle solvent are presented

  20. Solvent wash solution

    International Nuclear Information System (INIS)

    Neace, J.C.

    1986-01-01

    This patent describes a process for removing diluent degradation products from a solvent extraction solution comprising an admixture of an organic extractant for uranium and plutonium and a non-polar organic liquid diluent, which has been used to recover uranium and plutonium from spent nuclear fuel. Comprising combining a wash solution consisting of: (a) water; and (b) a positive amount up to about, an including, 50 volume percent of at least one highly-polar water-miscible organic solvent, based on the total volume of the water and the highly-polar organic solvent, with the solvent extraction solution after uranium and plutonium values have been stripped from the solvent extraction solution, the diluent degradation products dissolving in the highly-polar organic solvent and the extractant and diluent of the extraction solution not dissolving in the highly-polar organic solvent, and separating the highly-polar organic solvent and the extraction solution to obtain a purified extraction solution

  1. P300 brain potential among workers exposed to organic solvents

    Directory of Open Access Journals (Sweden)

    Bente E. Moen

    2009-10-01

    Full Text Available  SUMMARYThe P300 component of the auditory event-related brain potential was examined in a group of 11workers exposed to low levels of organic solvents in a paint factory and 11 unexposed controls beforeand after 3 weeks of summer vacation. The P300 latency time was found to be prolonged among theexposed workers compared to the reference group before the summer vacation, and to be significantlylonger before the vacation than after in the exposed group.The P300 component was also examined in a group of 85 seamen from chemical tankers, experiencingpeak exposures to organic solvents. They were compared to a reference group of unexposedseamen. Comparing these two groups, no difference was found in the P300 latency time. No relationshipbetween the P300 latency time and exposure was found in a multiple regression analysis, includingthe variables age, alcohol consumption, smoking and cerebral concussions.The study indicates the occurrence of an acute biological effect in the nervous system related toorganic solvent exposure, expressed by prolonged P300 latency time. This was found at very lowexposure levels and should be studied further.

  2. Lean consumption.

    Science.gov (United States)

    Womack, James P; Jones, Daniel T

    2005-03-01

    During the past 20 years, the real price of most consumer goods has fallen worldwide, the variety of goods and the range of sales channels offering them have continued to grow, and product quality has steadily improved. So why is consumption often so frustrating? It doesn't have to be--and shouldn't be--the authors say. They argue that it's time to apply lean thinking to the processes of consumption--to give consumers the full value they want from goods and services with the greatest efficiency and the least pain. Companies may think they save time and money by off-loading work to the consumer but, in fact, the opposite is true. By streamlining their systems for providing goods and services, and by making it easier for customers to buy and use those products and services, a growing number of companies are actually lowering costs while saving everyone time. In the process, these businesses are learning more about their customers, strengthening consumer loyalty, and attracting new customers who are defecting from less user-friendly competitors. The challenge lies with the retailers, service providers, manufacturers, and suppliers that are not used to looking at total cost from the standpoint of the consumer and even less accustomed to working with customers to optimize the consumption process. Lean consumption requires a fundamental shift in the way companies think about the relationship between provision and consumption, and the role their customers play in these processes. It also requires consumers to change the nature of their relationships with the companies they patronize. Lean production has clearly triumphed over similar obstacles in recent years to become the dominant global manufacturing model. Lean consumption, its logical companion, can't be far behind.

  3. Evaluation of Timing and Dosage of a Parent-Based Intervention to Minimize College Students’ Alcohol Consumption

    Science.gov (United States)

    Turrisi, Rob; Mallett, Kimberly A.; Cleveland, Michael J.; Varvil-Weld, Lindsey; Abar, Caitlin; Scaglione, Nichole; Hultgren, Brittney

    2013-01-01

    Objective: The study evaluated the timing and dosage of a parent-based intervention to minimize alcohol consumption for students with varying drinking histories. Method: First-year students (N = 1,900) completed Web assessments during the summer before college (baseline) and two follow-ups (fall of first and second years). Students were randomized to one of four conditions (pre-college matriculation [PCM], pre-college matriculation plus boosters [PCM+B], after college matriculation [ACM], and control conditions). Seven indicators of drinking (drink in past month, been drunk in past month, weekday [Sunday to Wednesday] drinking, Thursday drinking, weekend [Friday, Saturday] drinking, heavy episodic drinking in past 2 weeks, and peak blood alcohol concentration students. PMID:23200148

  4. Evaluation of timing and dosage of a parent-based intervention to minimize college students' alcohol consumption.

    Science.gov (United States)

    Turrisi, Rob; Mallett, Kimberly A; Cleveland, Michael J; Varvil-Weld, Lindsey; Abar, Caitlin; Scaglione, Nichole; Hultgren, Brittney

    2013-01-01

    The study evaluated the timing and dosage of a parent-based intervention to minimize alcohol consumption for students with varying drinking histories. First-year students (N = 1,900) completed Web assessments during the summer before college (baseline) and two follow-ups (fall of first and second years). Students were randomized to one of four conditions (pre-college matriculation [PCM], pre-college matriculation plus boosters [PCM+B], after college matriculation [ACM], and control conditions). Seven indicators of drinking (drink in past month, been drunk in past month, weekday [Sunday to Wednesday] drinking, Thursday drinking, weekend [Friday, Saturday] drinking, heavy episodic drinking in past 2 weeks, and peak blood alcohol concentration students.

  5. A comparison of accelerated solvent extraction, Soxhlet extraction, and ultrasonic-assisted extraction for analysis of terpenoids and sterols in tobacco.

    Science.gov (United States)

    Shen, Jinchao; Shao, Xueguang

    2005-11-01

    The performance of accelerated solvent extraction in the analysis of terpenoids and sterols in tobacco samples was investigated and compared with those of Soxhlet extraction and ultrasonically assisted extraction with respect to yield, extraction time, reproducibility and solvent consumption. The results indicate that although the highest yield was achieved by Soxhlet extraction, ASE appears to be a promising alternative to classical methods since it is faster and uses less solvent, especially when applied to the investigation of large batch tobacco samples. However, Soxhlet extraction is still the preferred method for analyzing sterols since it gives a higher extraction efficiency than other methods.

  6. Mixed Solvent Reactive Recrystallization of Sodium Carbonate

    NARCIS (Netherlands)

    Gaertner, R.S.

    2005-01-01

    Investigation of the reactive recrystallization of trona (sodium sesquicarbonate) and sodium bicarbonate to sodium carbonate (soda) in a mixed solvent led to the design of several alternative, less energy consumptive, economically very attractive process routes for the production of soda from all

  7. Time-, Sex-, and Dose-Dependent Alterations of the Gut Microbiota by Consumption of Dietary Daikenchuto (TU-100

    Directory of Open Access Journals (Sweden)

    Jun Miyoshi

    2018-01-01

    Full Text Available Medications or dietary components can affect both the host and the host’s gut microbiota. Changes in the microbiota may influence medication efficacy and interactions. Daikenchuto (TU-100, a herbal medication, comprised of ginger, ginseng, and Japanese pepper, is widely used in Japanese traditional Kampo medicine for intestinal motility and postoperative paralytic ileus. We previously showed in mice that consumption of TU-100 for 4 weeks changed the gut microbiota and increased bioavailability of bacterial ginsenoside metabolites. Since TU-100 is prescribed in humans for months to years, we examined the time- and sex-dependent effects of TU-100 on mouse gut microbiota. Oral administration of 1.5% TU-100 for 24 weeks caused more pronounced changes in gut microbiota in female than in male mice. Changes in both sexes largely reverted to baseline upon TU-100 withdrawal. Effects were time and dose dependent. The microbial profiles reverted to baseline within 4 weeks after withdrawal of 0.75% TU-100 but were sustained after withdrawal of 3% TU-100. In summary, dietary TU-100 changed mouse microbiota in a time-, sex-, and dose-dependent manner. These findings may be taken into consideration when determining optimizing dose for conditions of human health and disease with the consideration of differences in composition and response of the human intestinal microbiota.

  8. [Sedentary leisure time and food consumption among Brazilian adolescents: the Brazilian National School-Based Adolescent Health Survey (PeNSE), 2009].

    Science.gov (United States)

    Camelo, Lidyane do Valle; Rodrigues, Jôsi Fernandes de Castro; Giatti, Luana; Barreto, Sandhi Maria

    2012-11-01

    The objective of this paper was to investigate whether sedentary leisure time was associated with increased regular consumption of unhealthy foods, independently of socio-demographic indicators and family context. The analysis included 59,809 students from the Brazilian National School-Based Adolescent Health Survey (PeNSE) in 2009. The response variable was sedentary leisure time, defined as watching more than two hours of TV daily. The target explanatory variables were regular consumption of soft drinks, sweets, cookies, and processed meat. Odds ratios (OR) and 95% confidence limits (95%CI) were obtained by multiple logistic regression. Prevalence of sedentary leisure time was 65%. Regular consumption of unhealthy foods was statistically higher among students reporting sedentary leisure time, before and after adjusting for sex, age, skin color, school administration (public versus private), household assets index, and household composition. The results indicate the need for integrated interventions to promote healthy leisure-time activities and healthy eating habits among young people.

  9. Cardiovascular alterations at different stages of hypertension development during ethanol consumption: Time-course of vascular and autonomic changes

    Energy Technology Data Exchange (ETDEWEB)

    Crestani, Carlos C. [Department of Natural Active Principles and Toxicology, School of Pharmaceutical Sciences, Univ. Estadual Paulista—UNESP (Brazil); Lopes da Silva, Andréia [Department of Physiology, School of Medicine of Ribeirao Preto, University of Sao Paulo (Brazil); Scopinho, América A. [Department of Pharmacology, School of Medicine of Ribeirao Preto, University of Sao Paulo (Brazil); Ruginsk, Silvia G.; Uchoa, Ernane T. [Department of Physiology, School of Medicine of Ribeirao Preto, University of Sao Paulo (Brazil); Correa, Fernando M.A. [Department of Pharmacology, School of Medicine of Ribeirao Preto, University of Sao Paulo (Brazil); Elias, Lucila L.K.; Antunes-Rodrigues, José [Department of Physiology, School of Medicine of Ribeirao Preto, University of Sao Paulo (Brazil); Resstel, Leonardo B.M., E-mail: leoresstel@yahoo.com.br [Department of Pharmacology, School of Medicine of Ribeirao Preto, University of Sao Paulo (Brazil)

    2014-10-15

    The aim of the present work was to establish a time-course correlation between vascular and autonomic changes that contribute to the development of hypertension during ethanol ingestion in rats. For this, male Wistar rats were subjected to the intake of increasing ethanol concentrations in their drinking water during four weeks. Ethanol effects were investigated at the end of each week. Mild hypertension was already observed at the first week of treatment, and a progressive blood pressure increase was observed along the evaluation period. Increased pressor response to phenylephrine was observed from first to fourth week. α{sub 1}-adrenoceptor protein in the mesenteric bed was enhanced at the first week, whereas β{sub 2}-adrenoceptor protein in the aorta was reduced after the second week. In the third week, ethanol intake facilitated the depressor response to sodium nitroprusside, whereas in the fourth week it reduced nitrate content in aorta and increased it plasma. The bradycardic component of the baroreflex was impaired, whereas baroreflex tachycardia was enhanced at the third and fourth weeks. AT{sub 1A} receptor and C-type natriuretic peptide (CNP) mRNAs in the nucleus tractus solitarius were increased at the fourth week. These findings suggest that increased vascular responsiveness to vasoconstrictor agents is possibly a link factor in the development and maintenance of the progressive hypertension induced by ethanol consumption. Additionally, baroreflex changes are possibly mediated by alterations in angiotensinergic mechanisms and CNP content within the brainstem, which contribute to maintaining the hypertensive state in later phases of ethanol ingestion. Facilitated vascular responsiveness to nitric oxide seems to counteract ethanol-induced hypertension. - Highlights: • Mild hypertension was observed during the entire period of ethanol ingestion. • Ethanol facilitated vascular reactivity to vasoactive agents. • Changes in baroreflex activity

  10. The association between time scarcity, sociodemographic correlates and consumption of ultra-processed foods among parents in Norway: a cross-sectional study

    Directory of Open Access Journals (Sweden)

    Ingrid Laukeland Djupegot

    2017-05-01

    Full Text Available Abstract Background Use of ultra-processed foods has expanded rapidly over the last decades and high consumption has been positively associated with risk of e.g. overweight, obesity and type 2 diabetes. Ultra-processed foods offer convenience as they require minimal time for preparation. It is therefore reasonable to assume that such foods are consumed more often among people who experience time scarcity. The main aim of this study was to investigate the association between time scarcity and consumption of ultra-processed foods among parents of 2-year olds in Norway. A secondary aim was to investigate the association between sociodemographic correlates, weight status and consumption of ultra-processed foods. Methods This cross-sectional study included 497 participants. Chi-square and cross tabulations were used to calculate proportions of high vs. low consumption of ultra-processed foods in relation to time scarcity, sociodemographic correlates and weight status. Binary logistic regression analyses were performed to test the relationship between independent variables and consumption of ultra-processed foods. Results Participants reporting medium and high time scarcity were more likely to have a high consumption of ultra-processed dinner products (OR = 3. 68, 95% CI = 2. 32–5.84 and OR = 3.10, 1.80–5.35, respectively and fast foods (OR = 2.60, 1.62–4.18 and OR = 1.90, 1.08–3.32, respectively compared to those with low time scarcity. Further, participants with medium time scarcity were more likely to have a high consumption of snacks and soft drinks compared to participants with low time scarcity (OR = 1.63, 1.06–2.49. Finally, gender, ethnicity, educational level, number of children in the household and weight status were identified as important factors associated with the consumption of certain types of ultra-processed foods. Conclusions Results from the present study showed that time scarcity, various sociodemographic

  11. The association between time scarcity, sociodemographic correlates and consumption of ultra-processed foods among parents in Norway: a cross-sectional study.

    Science.gov (United States)

    Djupegot, Ingrid Laukeland; Nenseth, Camilla Bengtson; Bere, Elling; Bjørnarå, Helga Birgit Torgeirsdotter; Helland, Sissel Heidi; Øverby, Nina Cecilie; Torstveit, Monica Klungland; Stea, Tonje Holte

    2017-05-15

    Use of ultra-processed foods has expanded rapidly over the last decades and high consumption has been positively associated with risk of e.g. overweight, obesity and type 2 diabetes. Ultra-processed foods offer convenience as they require minimal time for preparation. It is therefore reasonable to assume that such foods are consumed more often among people who experience time scarcity. The main aim of this study was to investigate the association between time scarcity and consumption of ultra-processed foods among parents of 2-year olds in Norway. A secondary aim was to investigate the association between sociodemographic correlates, weight status and consumption of ultra-processed foods. This cross-sectional study included 497 participants. Chi-square and cross tabulations were used to calculate proportions of high vs. low consumption of ultra-processed foods in relation to time scarcity, sociodemographic correlates and weight status. Binary logistic regression analyses were performed to test the relationship between independent variables and consumption of ultra-processed foods. Participants reporting medium and high time scarcity were more likely to have a high consumption of ultra-processed dinner products (OR = 3. 68, 95% CI = 2. 32-5.84 and OR = 3.10, 1.80-5.35, respectively) and fast foods (OR = 2.60, 1.62-4.18 and OR = 1.90, 1.08-3.32, respectively) compared to those with low time scarcity. Further, participants with medium time scarcity were more likely to have a high consumption of snacks and soft drinks compared to participants with low time scarcity (OR = 1.63, 1.06-2.49). Finally, gender, ethnicity, educational level, number of children in the household and weight status were identified as important factors associated with the consumption of certain types of ultra-processed foods. Results from the present study showed that time scarcity, various sociodemographic factors and weight status was associated with consumption of processed foods

  12. Biodiesel production by direct transesterification of microalgal biomass with co-solvent.

    Science.gov (United States)

    Zhang, Yan; Li, Ya; Zhang, Xu; Tan, Tianwei

    2015-11-01

    In this study, a direct transesterification process using 75% ethanol and co-solvent was studied to reduce the energy consumption of lipid extraction process and improve the conversion yield of the microalgae biodiesel. The addition of a certain amount of co-solvent (n-hexane is most preferable) was required for the direct transesterification of microalgae biomass. With the optimal reaction condition of n-hexane to 75% ethanol volume ratio 1:2, mixed solvent dosage 6.0mL, reaction temperature 90°C, reaction time 2.0h and catalyst volume 0.6mL, the direct transesterification process of microalgal biomass resulted in a high conversion yield up to 90.02±0.55wt.%. Copyright © 2015 Elsevier Ltd. All rights reserved.

  13. Determinant factors of residential consumption and perception of energy conservation: Time-series analysis by large-scale questionnaire in Suita, Japan

    International Nuclear Information System (INIS)

    Hara, Keishiro; Uwasu, Michinori; Kishita, Yusuke; Takeda, Hiroyuki

    2015-01-01

    In this study, we examined determinant factors associated with the residential consumption and perception of savings of electricity and city gas; this was based on data collected from a large-scale questionnaire sent to households in Suita, Osaka Prefecture, Japan, in two different years: 2009 and 2013. We applied an ordered logit model to determine the overall trend of the determinant factors, and then we performed a more detailed analysis in order to understand the reasons why the determinant factors changed between the two periods. Results from the ordered logit model reveal that electricity and gas consumption was primarily determined by such factors as household income, number of family members, the number of home appliances, and the perceptions of energy savings; there was not much difference between the two years, although in 2013, household income did not affect the perception of energy savings. Detailed analysis demonstrated that households with high energy consumption and those with moderate consumption are becoming polarized and that there was a growing gap between consumption behavior and the perception of conservation. The implications derived from the analyses provide an essential insight into the design of a municipal policy to induce lifestyle changes for an energy-saving society. - Highlights: • Questionnaire was conducted to households in two years for time-series analysis. • We analyzed residential energy consumption and perception of savings in households. • Determinant factors for consumption and perception of savings were identified. • Households being wasteful of energy are also found willing to cut consumption. • Policy intervention could affect consumption pattern and perception of savings.

  14. Near-Real-Time Surveillance of Illnesses Related to Shellfish Consumption in British Columbia: Analysis of Poison Center Data.

    Science.gov (United States)

    Wan, Victoria; McIntyre, Lorraine; Kent, Debra; Leong, Dennis; Henderson, Sarah B

    2018-02-23

    Data from poison centers have the potential to be valuable for public health surveillance of long-term trends, short-term aberrations from those trends, and poisonings occurring in near-real-time. This information can enable long-term prevention via programs and policies and short-term control via immediate public health response. Over the past decade, there has been an increasing use of poison control data for surveillance in the United States, Europe, and New Zealand, but this resource still remains widely underused. The British Columbia (BC) Drug and Poison Information Centre (DPIC) is one of five such services in Canada, and it is the only one nested within a public health agency. This study aimed to demonstrate how DPIC data are used for routine public health surveillance in near-real-time using the case study of its alerting system for illness related to consumption of shellfish (ASIRCS). Every hour, a connection is opened between the WBM software Visual Dotlab Enterprise, which holds the DPIC database, and the R statistical computing environment. This platform is used to extract, clean, and merge all necessary raw data tables into a single data file. ASIRCS automatically and retrospectively scans a 24-hour window within the data file for new cases related to illnesses from shellfish consumption. Detected cases are queried using a list of attributes: the caller location, exposure type, reasons for the exposure, and a list of keywords searched in the clinical notes. The alert generates a report that is tailored to the needs of food safety specialists, who then assess and respond to detected cases. The ASIRCS system alerted on 79 cases between January 2015 and December 2016, and retrospective analysis found 11 cases that were missed. All cases were reviewed by food safety specialists, and 58% (46/79) were referred to designated regional health authority contacts for follow-up. Of the 42% (33/79) cases that were not referred to health authorities, some were

  15. Influence of Solvent-Solvent and Solute-Solvent Interaction Properties on Solvent-Mediated Potential

    International Nuclear Information System (INIS)

    Zhou Shiqi

    2005-01-01

    A recently proposed universal calculational recipe for solvent-mediated potential is applied to calculate excess potential of mean force between two large Lennard-Jones (LJ) or hard core attractive Yukawa particles immersed in small LJ solvent bath at supercritical state. Comparison between the present prediction with a hypernetted chain approximation adopted for solute-solute correlation at infinitely dilute limit and existing simulation data shows high accuracy for the region with large separation, and qualitative reliability for the solute particle contact region. The calculational simplicity of the present recipe allows for a detailed investigation on the effect of the solute-solvent and solvent-solvent interaction details on the excess potential of mean force. The resultant conclusion is that gathering of solvent particles near a solute particle leads to repulsive excess PMF, while depletion of solvent particles away from the solute particle leads to attractive excess PMF, and minor change of the solvent-solvent interaction range has large influence on the excess PMF.

  16. Independent and joint associations of TV viewing time and snack food consumption with the metabolic syndrome and its components; a cross-sectional study in Australian adults

    Science.gov (United States)

    2013-01-01

    Background Television (TV) viewing time is positively associated with the metabolic syndrome (MetS) in adults. However, the mechanisms through which TV viewing time is associated with MetS risk remain unclear. There is evidence that the consumption of energy-dense, nutrient poor snack foods increases during TV viewing time among adults, suggesting that these behaviors may jointly contribute towards MetS risk. While the association between TV viewing time and the MetS has previously been shown to be independent of adult’s overall dietary intake, the specific influence of snack food consumption on the relationship is yet to be investigated. The purpose of this study was to examine the independent and joint associations of daily TV viewing time and snack food consumption with the MetS and its components in a sample of Australian adults. Methods Population-based, cross-sectional study of 3,110 women and 2,572 men (>35 years) without diabetes or cardiovascular disease. Participants were recruited between May 1999 and Dec 2000 in the six states and the Northern Territory of Australia. Participants were categorised according to self-reported TV viewing time (low: 0-2 hr/d; high: >2 hr/d) and/or consumption of snack foods (low: 0-3 serves/d; high: >3 serves/d). Multivariate odds ratios [95% CI] for the MetS and its components were estimated using gender-specific, forced entry logistic regression. Results OR [95% CI] for the MetS was 3.59 [2.25, 5.74] (p≤0.001) in women and 1.45 [1.02, 3.45] (p = 0.04) in men who jointly reported high TV viewing time and high snack food consumption. Obesity, insulin resistance and hypertension (women only) were also jointly associated with high TV viewing time and high snack food consumption. Further adjustment for diet quality and central adiposity maintained the associations in women. High snack food consumption was also shown to be independently associated with MetS risk [OR: 1.94 (95% CI: 1.45, 2.60), p snack food

  17. Independent and joint associations of TV viewing time and snack food consumption with the metabolic syndrome and its components; a cross-sectional study in Australian adults.

    Science.gov (United States)

    Thorp, Alicia A; McNaughton, Sarah A; Owen, Neville; Dunstan, David W

    2013-08-09

    Television (TV) viewing time is positively associated with the metabolic syndrome (MetS) in adults. However, the mechanisms through which TV viewing time is associated with MetS risk remain unclear. There is evidence that the consumption of energy-dense, nutrient poor snack foods increases during TV viewing time among adults, suggesting that these behaviors may jointly contribute towards MetS risk. While the association between TV viewing time and the MetS has previously been shown to be independent of adult's overall dietary intake, the specific influence of snack food consumption on the relationship is yet to be investigated. The purpose of this study was to examine the independent and joint associations of daily TV viewing time and snack food consumption with the MetS and its components in a sample of Australian adults. Population-based, cross-sectional study of 3,110 women and 2,572 men (>35 years) without diabetes or cardiovascular disease. Participants were recruited between May 1999 and Dec 2000 in the six states and the Northern Territory of Australia. Participants were categorised according to self-reported TV viewing time (low: 0-2 hr/d; high: >2 hr/d) and/or consumption of snack foods (low: 0-3 serves/d; high: >3 serves/d). Multivariate odds ratios [95% CI] for the MetS and its components were estimated using gender-specific, forced entry logistic regression. OR [95% CI] for the MetS was 3.59 [2.25, 5.74] (p≤0.001) in women and 1.45 [1.02, 3.45] (p = 0.04) in men who jointly reported high TV viewing time and high snack food consumption. Obesity, insulin resistance and hypertension (women only) were also jointly associated with high TV viewing time and high snack food consumption. Further adjustment for diet quality and central adiposity maintained the associations in women. High snack food consumption was also shown to be independently associated with MetS risk [OR: 1.94 (95% CI: 1.45, 2.60), p snack food consumption are independently and

  18. Consumption of ultra-processed foods : an assessment of the literature on determinants of ultra-processed food consumption and an investigation of the potential effect of time scarcity

    OpenAIRE

    Djupegot, Ingrid Laukeland; Nenseth, Camilla Bengtson

    2016-01-01

    Masteroppgave folkehelsevitenskap - Universitetet i Agder 2016 Background Highly processed foods have been classified as ultra-processed, and consumption of such foodstuffs have expanded rapidly over the last decades. Ultra-processed foods are characterized as being accessible, attractive, palatable and often time-saving. An excess intake of ultra-processed foods has been associated with increased risk of e.g. overweight/obesity and diabetes type II. The aim of this master’s pr...

  19. Why did soft drink consumption decrease but screen time not? Mediating mechanisms in a school-based obesity prevention program

    OpenAIRE

    Chin A Paw, M.J.M.; Singh, A.S.; Brug, J.; Mechelen, van, W.

    2008-01-01

    Abstract Objectives This paper aims to identify the mediating mechanisms of a school-based obesity prevention program (DOiT). Methods The DOiT-program was implemented in Dutch prevocational secondary schools and evaluated using a controlled, cluster-randomised trial (September 2003 to May 2004). We examined mediators of effects regarding (1) consumption of sugar containing beverages (SCB); (2) consumption of high caloric snacks; (3) screen-viewing behaviour; and (4) active commuting to school...

  20. Hazardous solvent substitution

    International Nuclear Information System (INIS)

    Twitchell, K.E.

    1995-01-01

    This article is an overview of efforts at INEL to reduce the generation of hazardous wastes through the elimination of hazardous solvents. To aid in their efforts, a number of databases have been developed and will become a part of an Integrated Solvent Substitution Data System. This latter data system will be accessible through Internet

  1. The influence of market deregulation on fast food consumption and body mass index: a cross-national time series analysis.

    Science.gov (United States)

    De Vogli, Roberto; Kouvonen, Anne; Gimeno, David

    2014-02-01

    To investigate the effect of fast food consumption on mean population body mass index (BMI) and explore the possible influence of market deregulation on fast food consumption and BMI. The within-country association between fast food consumption and BMI in 25 high-income member countries of the Organisation for Economic Co-operation and Development between 1999 and 2008 was explored through multivariate panel regression models, after adjustment for per capita gross domestic product, urbanization, trade openness, lifestyle indicators and other covariates. The possible mediating effect of annual per capita intake of soft drinks, animal fats and total calories on the association between fast food consumption and BMI was also analysed. Two-stage least squares regression models were conducted, using economic freedom as an instrumental variable, to study the causal effect of fast food consumption on BMI. After adjustment for covariates, each 1-unit increase in annual fast food transactions per capita was associated with an increase of 0.033 kg/m2 in age-standardized BMI (95% confidence interval, CI: 0.013-0.052). Only the intake of soft drinks--not animal fat or total calories--mediated the observed association (β: 0.030; 95% CI: 0.010-0.050). Economic freedom was an independent predictor of fast food consumption (β: 0.27; 95% CI: 0.16-0.37). When economic freedom was used as an instrumental variable, the association between fast food and BMI weakened but remained significant (β: 0.023; 95% CI: 0.001-0.045). Fast food consumption is an independent predictor of mean BMI in high-income countries. Market deregulation policies may contribute to the obesity epidemic by facilitating the spread of fast food.

  2. Development of a new miniature short-residence-time annular centrifugal solvent extraction contactor for tests of process flowsheets in hot cells

    International Nuclear Information System (INIS)

    Lanoe, J.Y.; Rivalier, P.

    2000-01-01

    Researches undertaken on new nuclear fuel reprocessing extraction processes need tests of process flowsheets in hot cells. To this goal, a new miniature short residence-time annular centrifugal solvent extraction contactor was conceived and developed at Marcoule. This single stage contactor is composed of an outer stationary cylinder (made of transparent plexiglas on prototype and of stainless steel on models for hot cells) and a suspended inner rotating cylinder of stainless steel; the inside diameter of the rotor is 12 mm. Aqueous and organic phases are fed into the gap between the two cylinders. The mixture flows down the annular space and then up through an orifice at the bottom of the rotor. Into the rotor, the emulsion breaks rapidly under the centrifugal force (up to 600 g with rotor speed of 10,000 rpm). The separated phases flow over their weirs and discharge at the top in their collector rings. The liquid hold-up of this centrifugal contactor is approximately 6 mL. The use in hots cells needed original designs for: - the assembly of a single-stage contactor: every part (motor, rotor, stationary housing) is simply inserted on the other one without screws and nuts; - the assembly of multistage group: every stage is stacking in two rails and an intermediate part (supported on the two rails) links exit ports and their corresponding inlet ports. All the parts are pressed and sealed against a terminal plate with a screw. Separating capacity tests with. a prototype were conducted using water as the aqueous phase and hydrogenated tetra-propylene (TPH) as the organic phase with aqueous to organic (A/O) flow ratio equal to 1. The best performances were obtained with rotor speed ranging from 4000 to 5000 rpm; the total throughput was then up to 2 L.h -1 . For a total throughput of 300 mL.h -1 , the hold-up in the annular mixing zone varied from 0.5 to 1.5 mL according to the A/O ratio and the starting mode. A number of tests were also performed to measure the

  3. Non-separable time preferences, novelty consumption and body weight: Theory and evidence from the East German transition to capitalism.

    Science.gov (United States)

    Dragone, Davide; Ziebarth, Nicolas R

    2017-01-01

    This paper develops a dynamic model to illustrate how diet and body weight change when novel food products become available to consumers. We propose a microfounded test to empirically discriminate between habit and taste formation in intertemporal preferences. Moreover, we show that 'novelty consumption' and endogenous preferences can explain the persistent correlation between economic development and obesity. By empirically studying the German reunification, we find that East Germans consumed more novel Western food and gained more weight than West Germans when a larger variety of food products became readily accessible after the fall of the Wall. The observed consumption patterns suggest that food consumption features habit formation. Copyright © 2016 Elsevier B.V. All rights reserved.

  4. Why did soft drink consumption decrease but screen time not? Mediating mechanisms in a school-based obesity prevention program

    Directory of Open Access Journals (Sweden)

    Brug Johannes

    2008-08-01

    Full Text Available Abstract Objectives This paper aims to identify the mediating mechanisms of a school-based obesity prevention program (DOiT. Methods The DOiT-program was implemented in Dutch prevocational secondary schools and evaluated using a controlled, cluster-randomised trial (September 2003 to May 2004. We examined mediators of effects regarding (1 consumption of sugar containing beverages (SCB; (2 consumption of high caloric snacks; (3 screen-viewing behaviour; and (4 active commuting to school. To improve these behaviours the DOiT-program tried to influence the following potentially mediating variables: attitude, subjective norm, perceived behavioural control, and habit-strength. Results Both in boys (n = 418 and girls (n = 436 the DOiT-intervention reduced SCB consumption (between group difference in boys = -303.5 ml/day, 95% CI: -502.4;-104.5, between group difference in girls = -222.3 ml/day, 95% CI: -371.3;-73.2. The intervention did not affect the other examined behaviours. In girls, no intervention effect on hypothetical mediators was found nor evidence of any mediating mechanisms. Boys in intervention schools improved their attitude towards decreasing SCB consumption, while this behaviour became less of a habit. Indeed, attitude and habit strength were significant mediators of the DOiT-intervention's effect (4.5 and 3.8%, respectively on SCB consumption among boys. Conclusion Our findings imply that interventions aimed at EBRB-change should be gender-specific. Future studies aimed at reducing SCB consumption among boys should target attitude and habit strength as mediating mechanisms. Our study did not resolve the mediating mechanisms in girls. Trial registration International Standard Randomised Controlled Trial Number Register ISRCTN87127361

  5. The Amount of Time to Eat Lunch is Associated with Children’s Selection and Consumption of School Meal Entrée, Fruits, Vegetable, and Milk

    Science.gov (United States)

    Cohen, Juliana F.W.; Jahn, Jaquelyn L.; Richardson, Scott; Cluggish, Sarah A.; Parker, Ellen; Rimm, Eric B.

    2015-01-01

    Background There are currently no national standards for school lunch period lengths and little is known about the association between the amount of time students have to eat and school food selection and consumption. Objectives To examine plate waste measurements from students in the control arm from the MEALS study (2011-2012 school year) for the association of the amount of time to eat with school meal selection and consumption. Design Prospective study using up to six repeated measures among students over the school year. Participants/Setting 1001 students in grades 3-8 attending 6 participating elementary/middle schools in an urban, low-income school district where lunch period lengths varied from 20-30 minutes. Main Outcome Measures School food selection and consumption were collected using plate waste methodology. Statistical Analyses Performed Logistic regression and mixed-model ANOVA was used to examine food selection and consumption. Results Compared with meal component selection when students had at least 25 minutes to eat, students were significantly less likely to select a fruit (44% vs. 57%; p=0.0001) compared with when students had fewer than 20 minutes to eat. There were no significant differences in entrée, milk, or vegetable selection. Among those who selected a meal component, students with fewer than 20 minutes to eat consumed 13% less of their entrée (peat. Conclusions Over the school year, a substantial number of students had insufficient time to eat, which was associated with significantly decreased entrée, milk, and vegetable consumption compared with students who had more time to eat. School policies that encourage lunches with at least 25 minutes of seated time may reduce food waste and improve dietary intake. PMID:26372337

  6. Amount of Time to Eat Lunch Is Associated with Children's Selection and Consumption of School Meal Entrée, Fruits, Vegetables, and Milk.

    Science.gov (United States)

    Cohen, Juliana F W; Jahn, Jaquelyn L; Richardson, Scott; Cluggish, Sarah A; Parker, Ellen; Rimm, Eric B

    2016-01-01

    There are currently no national standards for school lunch period length and little is known about the association between the amount of time students have to eat and school food selection and consumption. Our aim was to examine plate-waste measurements from students in the control arm of the Modifying Eating and Lifestyles at School study (2011 to 2012 school year) to determine the association between amount of time to eat and school meal selection and consumption. We used a prospective study design using up to six repeated measures among students during the school year. One thousand and one students in grades 3 to 8 attending six participating elementary and middle schools in an urban, low-income school district where lunch period lengths varied from 20 to 30 minutes were included. School food selection and consumption were collected using plate-waste methodology. Logistic regression and mixed-model analysis of variance was used to examine food selection and consumption. Compared with meal-component selection when students had at least 25 minutes to eat, students were significantly less likely to select a fruit (44% vs 57%; Peat. There were no significant differences in entrée, milk, or vegetable selections. Among those who selected a meal component, students with eat consumed 13% less of their entrée (Peat. During the school year, a substantial number of students had insufficient time to eat, which was associated with significantly decreased entrée, milk, and vegetable consumption compared with students who had more time to eat. School policies that encourage lunches with at least 25 minutes of seated time might reduce food waste and improve dietary intake. Copyright © 2016 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

  7. 19F NMR spectroscopy in monitoring fluorinated-solvent regeneration

    International Nuclear Information System (INIS)

    Ogorodnikov, V.D.; Bordunov, V.V.

    1987-01-01

    Extensive use is made of solvents such as trichloroethylene, freon-133, and perchloroethylene because they are good solvents for inorganic, plant, and animal greases, while the solvents can be recovered and there is no fire hazard. In this paper, the authors examined methods to monitor spent solution regeneration rapidly and with high accuracy. The authors tested perfluorinated telomeric alcohols as solvents for cleaning engineering components which have melting points of 60-120 degrees celsius. The higher working temperatures and the increased energy consumption are disadvantages of these solvents, but these are compensated for by the scope for using them virtually in the solid, liquid, and vapor states. The authors' proposed technology is based on solvents with melting points over 40 degrees celsius which produce virtually no wastes. The telomeric alcohols are recovered after cooling to normal conditions by separation from the oil by filtration and centrifugation, and they can be used in the next purification cycle. When the solvents have been regenerated, the petroleum products such as industrial oils can be reused for their original purpose. However, quantitative data are required on the solvent contents in the oil and the oil contents in the solvent in order to determine the degree of regeneration and the modes to be used. The authors have also proposed a quantitative method of determining traces of these alcohols in oils and residual oils in the solvent by fluorine NMR. All measurements were made with a BS497 NMR spectrometer

  8. Is there a link between per capita alcohol consumption and youth drinking? A time-series analysis for Sweden in 1972-2012.

    Science.gov (United States)

    Norström, Thor; Raninen, Jonas

    2015-06-01

    To estimate the relationship between per capita alcohol consumption and youth drinking in Sweden during the last 40 years and to estimate the relationship between female and male youth drinking during the 40-year study period. Per capita alcohol consumption was proxied by official sales data, supplemented by data on unrecorded consumption. Youth consumption was measured by a question on heavy episodic drinking (HED) included in an annual school survey of alcohol and drug habits among Swedish 9th -grade students (15-16 years of age). The annual samples comprise approximately 5000 individuals (with roughly equal numbers of boys and girls) with response rates in the range 80-93%. The study spans the period 1972-2012. Autoregressive integrated moving average (ARIMA) time-series analysis was used to estimate the relation between per-capita alcohol consumption and youth drinking. Ocular inspection of the time-series data suggested a stronger synchronization between the two series in the early period, before the mid-1990s, than in the later period, indicating a structural shift in the relation at issue. We therefore conducted period specific time-series analyses with 1995 as the year of division. There was a statistically significant relation between per capita alcohol consumption and HED among youth for 1972-94. A 1% increase in per capita alcohol consumption was associated with an increase in HED of 1.52% (P = 0.008). The estimate for 1995-2012 (0.12) was well below statistical significance (P = 0.580). The estimated elasticity of the association between boys' and girls' HED during 1972-94 was close to unity (0.98, P < 0.001), suggesting proportional changes in boys' and girls' drinking. When controlling for per capita consumption, the association was halved (to 0.55) but still significant in table 3 (P = 0.045). Adult and youth drinking in Sweden were synchronized closely during the two last decades of the 20th century, but youth drinking developed an

  9. A qualitative study of users' engagement with real-time feedback from in-house energy consumption displays

    International Nuclear Information System (INIS)

    Oltra, Christian; Boso, Alex; Espluga, Josep; Prades, Ana

    2013-01-01

    Recent developments in feedback technologies and smart meters have advanced the introduction of energy consumption displays in the home. This could facilitate a significant amount of energy saving for the maximum number of homeowners. But empirical studies show that achieved savings in electricity consumption from in-house displays range approximately from 0 to 20%. In order to qualitatively explore the factors underlying such variation in the achieved saving, this paper studies how a small sample of householders interacted with the feedback from an energy consumption display. Following a heuristic model based on prior energy-related behavioral research, we explore the effects of the in-home display on household electricity. Results indicate that saving might be moderated by the level of user's engagement with the display, preceded by user's motivation to save energy, prior attitudes and, importantly, the level of involvement generated by the intervention. - Highlights: • We explore how householders interact with energy consumption displays. • Users' level of engagement with the display influence achieved savings. • User's motivation, level of involvement and prior attitudes are key elements

  10. Determining the better solvent and time for extracting soil by soxhlet in TPH (Total Petroleum Hydrocarbon) gravimetric method; A determinacao de qual o melhor solvente e o melhor tempo de extracao de sedimento em aparato Soxhlet na metodologia do TPH (Total Petroleum Hydrocarbon) gravimetrico

    Energy Technology Data Exchange (ETDEWEB)

    Koike, Renato S.; Lima, Guilherme; Baisch, Paulo R. [Fundacao Universidade Federal do Rio Grande (FURG), RS (Brazil)

    2004-07-01

    There are several methods of TPH (Total Petroleum Hydrocarbons) analysis of petroleum hydrocarbons contaminants in sediment. The TPH gravimetric has been widely used in many studies and in oil spill monitoring case. The present work examined three different solvents (DCM, DCM/N-HEX and N-HEX), in three different times, to the purpose to optimize the contaminants extraction using USEPA 9071 and 3540 reference method. Then was realized analysis of Total Organic Carbon (TOC) for monitoring the reproducible extracts. The sediments used in this experiment was collected in the Cavalos Island, localized in the city of Rio Grande, RS-Brasil. The sediment was 'washed' and after then contaminated with petroleum. The extracts were realized in Soxhlet apparatus, in three different times (4, 8 and 12 hours), and TOC analysis were realized before and after the extraction. The result demonstrated that eight hours with DCM/N-HEX solvent is more indicated for TPH gravimetric in sediment analysis with high concentration of petroleum hydrocarbons. TOC analysis demonstrated inappropriate for monitoring extract reproducibility. (author)

  11. Drug consumption rooms: Comparing times, spaces and actors in issues of social acceptability in French public debate.

    Science.gov (United States)

    Jauffret-Roustide, Marie; Cailbault, Isabelle

    2018-06-01

    In October 2016, the first French drug consumption room (DCR) opened in Paris. We propose to examine the process through which this issue has been framed as a matter of public concern, after being ignored for almost 20 years. Our analysis of the controversy on DCRs investigates how public conversations on harm reduction evolve according to the time period (from the 1990s to the present), scale of discourse (local vs. national), and involved actors (politicians, professionals, local residents, and drug users). Our methodology includes analyses of media content: we reviewed 1735 articles published between 1990 and 2017. Our theoretical approach is in line with the sociology "des épreuves" derived from pragmatic sociology and controversy analysis. This approach goes beyond interactionism by attempting to place situations back into broader sociological realities. We also pay special attention to governance, a political lens that focuses on local aspects of negotiations and on the implication of a variety of actors. While the current debate on DCRs in France draws on constraints and resources already present in the harm reduction debate of the 1980s, it also repositions itself by avoiding moral argumentation and featuring less confrontation in the professional sphere. Today, we can see that the center of this tense debate has shifted from the professional sphere to the political and residential spheres. Most often, residents advance concerns that are not directly related to drug users themselves, but that derive from their apprehension of living in a displaced and stranded neighborhood. The public conversation leaves little room for drug users, even though they are the primary stakeholders of harm reduction and play a crucial role in DCR advocacy. Our work reveals that the controversy about DCR is the product of complex interactions between different kinds of actors harm reduction professionals, political actors at the local and national levels, local residents, and

  12. Solvent - solute interaction

    International Nuclear Information System (INIS)

    Urbanczyk, A.; Kalinowski, M.K.

    1983-01-01

    The electronic absorption spectrum of vanadyl acetylacetonate has been studied in 15 organic solvents. It has been found that wavenumbers and molar absorptivities of the long-wavelength bands (d-d transitions) can be well described by a complementary Lewis acid-base model including Gutmann's donor number [Gutmann V., Wychera E., Inorg. Nucl. Chem. Letters 2, 257 (1966)] and acceptor number [Mayer U., Gutmann V., Gerger W., Monatsh. Chem. 106, 1235 (1975)] of a solvent. This model describes also the solvent effect of the hyperfine splitting constant, Asub(iso)( 51 V), from e.s.r. spectra of VOacac 2 . These observations are discussed in terms of the donor-acceptor concept for solvent-solute interactions. (Author)

  13. Screen-based sedentary time: Association with soft drink consumption and the moderating effect of parental education in European children: The ENERGY study.

    Science.gov (United States)

    Gebremariam, Mekdes K; Chinapaw, Mai J; Bringolf-Isler, Bettina; Bere, Elling; Kovacs, Eva; Verloigne, Maïté; Stok, F Marijn; Manios, Yannis; Brug, Johannes; Lien, Nanna

    2017-01-01

    The aim of the present study was to explore if children who spend more time on screen-based sedentary behaviors (i.e.TV viewing and computer use) drink more sugar-sweetened soft drinks. The study also assessed whether these associations were independent of individual and home environmental correlates of soft drink consumption and whether they were moderated by parental education. Data were collected from 7886 children participating in the EuropeaN Energy balance Research to prevent excessive weight Gain among Youth (ENERGY) survey conducted in eight European countries. Self-report questionnaires were used. Multilevel linear regression analyses with soft drink consumption as dependent variable, TV viewing and computer use as independent variables and age, gender, parental education, attitude towards soft drinks, self-efficacy, parental modelling, parental rules and home availability of soft drinks as covariates were conducted. Further interactions were tested to explore if these associations were moderated by parental education. Country-specific analyses were conducted. In six of the eight included countries, a significant positive association was observed between TV viewing (min/day) and soft drink consumption (ml/day), independent of individual and home environmental correlates of soft drink consumption (B = 0.46 (0.26-0.66) in Greece, B = 0.77 (0.36-1.17) in Norway, B = 0.82 (0.12-1.51) in Hungary, B = 1.06 (0.67-1.46) in Spain, B = 1.21 (0.67-1.74) in Belgium and B = 1.49 (0.72-2.27) in Switzerland). There was no significant association between computer use and soft drink consumption in six of the eight included countries in the final models. Moderation effects of parental education in the association between TV viewing and soft drink consumption were found in Norway and Hungary, the association being stronger among those with low parental education. TV viewing appears to be independently associated with soft drink consumption and this association was moderated

  14. TRUEX process solvent cleanup with solid sorbents

    International Nuclear Information System (INIS)

    Tse, Pui-Kwan; Reichley-Yinger, L.; Vandegrift, G.F.

    1989-01-01

    Solid sorbents, alumina, silica gel, and Amberlyst A-26 have been tested for the cleanup of degraded TRUEX-NPH solvent. A sodium carbonate scrub alone does not completely remove acidic degradation products from highly degraded solvent and cannot restore the stripping performance of the solvent. By following the carbonate scrub with either neutral alumina or Amberlyst A-26 anion exchange resin, the performance of the TRUEX-NPH is substantially restored. The degraded TRUEX-NPH was characterized before and after treatment by supercritical fluid chromatography. Its performance was evaluated by americium distribution ratios, phase-separation times, and lauric acid distribution coefficients. 17 refs., 2 figs., 5 tabs

  15. Analytic strategies to evaluate the association of time-varying exposures to HIV-related outcomes: Alcohol consumption as an example.

    Science.gov (United States)

    Cook, Robert L; Kelso, Natalie E; Brumback, Babette A; Chen, Xinguang

    2016-01-01

    As persons with HIV are living longer, there is a growing need to investigate factors associated with chronic disease, rate of disease progression and survivorship. Many risk factors for this high-risk population change over time, such as participation in treatment, alcohol consumption and drug abuse. Longitudinal datasets are increasingly available, particularly clinical data that contain multiple observations of health exposures and outcomes over time. Several analytic options are available for assessment of longitudinal data; however, it can be challenging to choose the appropriate analytic method for specific combinations of research questions and types of data. The purpose of this review is to help researchers choose the appropriate methods to analyze longitudinal data, using alcohol consumption as an example of a time-varying exposure variable. When selecting the optimal analytic method, one must consider aspects of exposure (e.g. timing, pattern, and amount) and outcome (fixed or time-varying), while also addressing minimizing bias. In this article, we will describe several analytic approaches for longitudinal data, including developmental trajectory analysis, generalized estimating equations, and mixed effect models. For each analytic strategy, we describe appropriate situations to use the method and provide an example that demonstrates the use of the method. Clinical data related to alcohol consumption and HIV are used to illustrate these methods.

  16. Determination of four major saponins in the seeds of Aesculus chinensis Bunge using accelerated solvent extraction followed by high-performance liquid chromatography and electrospray-time of flight mass spectrometry.

    Science.gov (United States)

    Chen, Junhui; Li, Wenlong; Yang, Baijuan; Guo, Xiuchun; Lee, Frank Sen-Chun; Wang, Xiaoru

    2007-07-23

    A new method based on accelerated solvent extraction (ASE) followed by a reliable high-performance liquid chromatography-diode array detector (HPLC-DAD) and positive ion electrospray-time of flight mass spectrometry (ESI-TOF/MS) analysis has been developed for the characterization and quantification of four major saponins in extracts of the seeds of Aesculus chinensis Bunge (semen aesculi). The saponins escin Ia, escin Ib, isoescin Ia and isoescin Ib were extracted from seeds of A. chinesis Bunge via ASE, and the operational parameters of ASE were optimized, such as extraction solvent, extraction temperature, static extraction time and extraction cycles. The optimized procedure employed 70% MeOH as extraction solvent, 120 degrees C of extraction temperature, 7 min of static extraction time, 60% flush volume and the extraction recoveries of the four compounds were nearly to 100% for two cycles. The HPLC conditions are as follows: SinoChrom ODS BP C18 (4.6 mm x 200 mm, 5 microm) column, acetonitrile and 0.10% phosphoric acid solution as mobile phase, flow rate is 1.0 mL min(-1), detection length of UV is 203 nm, injection volume is 10 microL. The results indicated that the developed HPLC method is simple, sensitive and reliable for the determination of four major saponins in seeds of A. chinesis Bunge with a good linearity (r2 > 0.9994), precision (relative standard deviation (R.S.D.) < 1.5%) and the recovery ranges of 95.2-97.3%. The limits of detection (LOD) of the four compounds were in the range of 0.40-0.75 microg mL(-1). This assay can be readily utilized as a quality control method for semen aesculi and other related medicinal plants.

  17. HUBUNGAN KONSUMSI MAKANAN IBU SELAMA KEHAMILAN DAN PEMBERIAN ASI PERTAMA KALI SETELAH MELAHIRKAN (ASSOCIATION OF MATERNAL FOOD CONSUMPTION DURING PREGNANCY AND THE FIRST TIME BREASTFEEDING AFTER DELIVERY

    Directory of Open Access Journals (Sweden)

    Tjetjep Syarif Hidayat

    2013-07-01

    Full Text Available ABSTRACT Background: Ability to produce breast-milk is to some extent dependent on the storage of material from the mother's food during the prenatal period, as well as on the supply of nutrients from the food she receives during lactation. Objective: To study association of maternal food consumption during pregnancy and the first time breastfeeding after delivery. Methods: We took advantage from a cross-sectional research for Development of Media and Promotional Strategies for Exclusive Breastfeeding in rural and urban West Java, 2006. The analysis is based on 609 mothers who had infants aged 6-12 months in the Bandung city and district, West Java. ‘The first time breastfeeding after delivery’ was identified from the question of ‘how many hours after birth did mother breastfeed her child for the first time’. We used Chi-Square to analyze the association between the mother’s food consumption during prenatal period and the first time breastfeeding after delivery. Results: Mothers who ate more food during pregnancy as much as 1-2 servings per day of pre-pregnancy and the occasional drink of milk to the baby was feeding time less than 3 hours after birth. Whereas mothers who during pregnancy eating just the same as before pregnancy, the first time breastfeeding was longer than 3 hours or even up to 2 days after delivery. The test results obtained was statistically significant difference. Conclusion: Maternal food consumption during pregnancy is significantly associated with the first time breastfeeding after delivery. [Penel Gizi Makan 2010, 33(2: 154-160] Keywords: food consumption, maternal, pregnancy, early breast-milk

  18. Solvent management in a reprocessing plant

    International Nuclear Information System (INIS)

    Guillaume, B.; Germain, M.; Puyou, M.; Rouyer, H.

    1987-01-01

    Solvent management in large capacity reprocessing plant is studied to limit production of organic wastes. Chemical processing increases life time of solvent. Low pressure distillation allows the recycling of TBP and diluent at a low activity level. Besides heavy degradation products are eliminated. For the safety the flash point of distillated diluent increases slightly. Tests on an industrial scale started in 1985 and since more than 500 cubic meters were treated [fr

  19. Purex process solvent: literature review

    Energy Technology Data Exchange (ETDEWEB)

    Geier, R.G.

    1979-10-01

    This document summarizes the data on Purex process solvent presently published in a variety of sources. Extracts from these various sources are presented herein and contain the work done, the salient results obtained, and the original, unaltered conclusions of the author of each paper. Three major areas are addressed: solvent stability, solvent quality testing, and solvent treatment processes. 34 references, 44 tables.

  20. Purex process solvent: literature review

    International Nuclear Information System (INIS)

    Geier, R.G.

    1979-10-01

    This document summarizes the data on Purex process solvent presently published in a variety of sources. Extracts from these various sources are presented herein and contain the work done, the salient results obtained, and the original, unaltered conclusions of the author of each paper. Three major areas are addressed: solvent stability, solvent quality testing, and solvent treatment processes. 34 references, 44 tables

  1. Fashion, time and the consumption of a Renaissance man in Germany: the costume book of Matthaus Schwarz of Augsburg, 1496-1564.

    Science.gov (United States)

    Mentges, Gabriele

    2002-01-01

    This article uses the perspective of cultural anthropology to consider the construction of an early modern perception of time and its relation to the dress and personal consumption of a male subject. It focuses on a costume book from the Renaissance compiled by Matthäus Schwarz, a member of the bourgeoisie, who lived in Augsburg from 1496 to 1574. The book contains a collection of 137 drawings, portraying Schwarz's personal choice of dress. It is also an account of Schwarz's life, beginning with his parents, then covering his life-stages from birth to old age. The relationships between body and dress and between the male subject and the world run as a major thread through the book. This article shows how closely connected Schwarz's body is with the life of commodities (dress) and consumption. The life-story of this Renaissance man is expressed in terms of changing fashions, which act as his subjective measure of time.

  2. Incidence of tuberculosis and associations with indicators of alcohol consumption in three regions of northwest Russia in 1975-2009: a time-series analysis.

    Science.gov (United States)

    Kuznetsov, V N; Shelygin, K V; Grjibovski, A M; Mariandyshev, A O; Johansson, E; Bjune, G A

    2013-01-01

    Alcohol has several social consequences that are associated with increased risk of tuberculosis. However, there have been no studies assessing the links between tuberculosis and alcohol consumption in northwest Russia. The aim of this study was to assess associations between the incidence of tuberculosis and indicators of alcohol consumption in three regions of northwest Russia. The study was performed in Arkhangelsk, Murmansk and Vologda regions using the data from 1975 to 2009. Deaths from alcohol poisoning and the incidence of alcohol psychoses were used as indicators of alcohol consumption. Associations between the incidence of tuberculosis and the above mentioned indicators were studied using time-series analysis. We identified significant positive associations between the incidence of tuberculosis and the incidence of alcohol psychoses in the same year in Arkhangelsk region (β = 0.24, 95% CI: 0.10-0.37) and in Vologda region (β = 0.18, 95% CI: 0.10-0.25), but not in Murmansk region. We found an association between the incidence of alcohol psychoses and the incidence of tuberculosis in the same year in Arkhangelsk and Vologda regions suggesting an indirect link between excessive levels of alcohol consumption and the incidence of tuberculosis in Russia.

  3. The influence of solvent processing on polyester bioabsorbable polymers.

    Science.gov (United States)

    Manson, Joanne; Dixon, Dorian

    2012-01-01

    Solvent-based methods are commonly employed for the production of polyester-based samples and coatings in both medical device production and research. The influence of solvent casting and subsequent drying time was studied using thermal analysis, spectroscopy and weight measurement for four grades of 50 : 50 poly(lactic-co-glycolic acid) (PLGA) produced by using chloroform, dichloromethane, and acetone. The results demonstrate that solvent choice and PLGA molecular weight are critical factors in terms of solvent removal rate and maintaining sample integrity, respectively. The protocols widely employed result in high levels of residual solvent and a new protocol is presented together with solutions to commonly encountered problems.

  4. Ratiometric Fluorescence Sensing and Real-Time Detection of Water in Organic Solvents with One-Pot Synthesis of Ru@MIL-101(Al)-NH2.

    Science.gov (United States)

    Yin, Hua-Qing; Yang, Ji-Chun; Yin, Xue-Bo

    2017-12-19

    Ratiometric fluorescence detection attracts much attention because of its decreased environmental influence and easy-to-differentiate color and intensity change. Herein, a guest-encapsulation metal-organic framework (MOF), Ru@MIL-NH 2 , is prepared with 2-aminoterephthalic acid, AlCl 3 , and Ru(bpy) 3 2+ by a simple one-pot method for ratiometric fluorescence sensing of water in organic solvents. The rational selection of the excitation wavelength provides dual emission at 465 and 615 nm from Ru@MIL-NH 2 under a single excitation of 300 nm. High sensitivity, low detection limit (0.02% v/v), wide response range (0-100%), and fast response (less than 1 min) are obtained for ratiometric fluorescence sensing of water under single excitation with Ru@MIL-NH 2 as the probe. Moreover, the result of water content is independent of the concentration of Ru@MIL-NH 2 as the merit of ratiometric fluorescence detection. The response mechanism reveals that the protonation of the nitrogen atom of the MIL-NH 2 , the π-conjugation system, and the stable fluorescence of Ru(bpy) 3 2+ achieve the ratiometric fluorescence. The analysis of real spirit samples confirms the proposed method. A test strip is prepared with Ru@MIL-NH 2 for convenient use. We believe that such turn-on ratiometric host-guest MOFs and the rational selection of excitation wavelength will offer guidance for ratiometric fluorescence detection with wide applications.

  5. Separation by solvent extraction

    International Nuclear Information System (INIS)

    Holt, C.H. Jr.

    1976-01-01

    In a process for separating fission product values from U and Pu values contained in an aqueous solution, an oxidizing agent is added to the solution to secure U and Pu in their hexavalent state. The aqueous solution is contacted with a substantially water-immiscible organic solvent with agitation while the temperature is maintained at from -1 to -2 0 C until the major part of the water present is frozen. The solid ice phase is continuously separated as it is formed and a remaining aqueous liquid phase containing fission product values and a solvent phase containing Pu and U values are separated from each other. The last obtained part of the ice phase is melted and added to the separated liquid phase. The resulting liquid is treated with a new supply of solvent whereby it is practically depleted of U and Pu

  6. Solvent/non-solvent sintering: a novel route to create porous microsphere scaffolds for tissue regeneration.

    Science.gov (United States)

    Brown, Justin L; Nair, Lakshmi S; Laurencin, Cato T

    2008-08-01

    Solvent/non-solvent sintering creates porous polymeric microsphere scaffolds suitable for tissue engineering purposes with control over the resulting porosity, average pore diameter, and mechanical properties. Five different biodegradable biocompatible polyphosphazenes exhibiting glass transition temperatures from -8 to 41 degrees C and poly (lactide-co-glycolide), (PLAGA) a degradable polymer used in a number of biomedical settings, were examined to study the versatility of the process and benchmark the process to heat sintering. Parameters such as: solvent/non-solvent sintering solution composition and submersion time effect the sintering process. PLAGA microsphere scaffolds fabricated with solvent/non-solvent sintering exhibited an interconnected porosity and pore size of 31.9% and 179.1 mum, respectively which was analogous to that of conventional heat sintered PLAGA microsphere scaffolds. Biodegradable polyphosphazene microsphere scaffolds exhibited a maximum interconnected porosity of 37.6% and a maximum compressive modulus of 94.3 MPa. Solvent/non-solvent sintering is an effective strategy for sintering polymeric microspheres, with a broad spectrum of glass transition temperatures, under ambient conditions making it an excellent fabrication route for developing tissue engineering scaffolds and drug delivery vehicles. (c) 2007 Wiley Periodicals, Inc.

  7. Portrayal of tobacco use in prime-time TV dramas: trends and associations with adult cigarette consumption--USA, 1955-2010.

    Science.gov (United States)

    Jamieson, Patrick E; Romer, Daniel

    2015-05-01

    Although portrayal of television (TV) and movie tobacco use has been linked with initiation of cigarette smoking in adolescents, its association with smoking in adults has not been assessed. Therefore, we examined long-term and annual changes in tobacco portrayal in popular US TV dramas and their associations with comparable trends in national adult cigarette consumption. Tobacco use in 1838 h of popular US TV dramas was coded from 1955-2010. The long-term trend and annual deviations from trend were studied in relation to comparable trends in adult per capita cigarette consumption using correlational and time-series methods that controlled for other potential predictors. TV tobacco portrayal has trended downward since 1955 in line with the historical trend in cigarette consumption. Controlling for changes in cigarette prices and other factors, annual changes of one tobacco instance per episode hour across 2 years of programming were associated with annual change of 38.5 cigarettes per US adult. The decline in TV tobacco portrayal was associated with nearly half the effect of increases in cigarette prices over the study period. The correlation between tobacco portrayal in TV dramas and adult cigarette consumption is consistent with well-established effects of exposure to tobacco cues that create craving for cigarettes in adult smokers. Although tobacco use in TV dramas along with movies has declined over time, portrayal of smoking on screen media should be a focus for future adult tobacco control research and policy. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  8. Organic solvent topical report

    Energy Technology Data Exchange (ETDEWEB)

    COWLEY, W.L.

    1999-05-13

    This report provides the basis for closing the organic solvent safety issue. Sufficient information is presented to conclude that risk posed by an organic solvent fire is within risk evaluation guidelines. This report updates information contained in Analysis of Consequences of Postulated Solvent Fires in Hanford Site Waste Tanks. WHC-SD-WM-CN-032. Rev. 0A (Cowley et al. 1996). However, this document will not replace Cowley et al (1996) as the primary reference for the Basis for Interim Operation (BIO) until the recently submitted BIO amendment (Hanson 1999) is approved by the US Department of Energy. This conclusion depends on the use of controls for preventing vehicle fuel fires and for limiting the use of flame cutting in areas where hot metal can fall on the waste surface.The required controls are given in the Tank Waste Remediation System Technical Safety Requirements (Noorani 1997b). This is a significant change from the conclusions presented in Revision 0 of this report. Revision 0 of this calcnote concluded that some organic solvent fire scenarios exceeded risk evaluation guidelines, even with controls imposed.

  9. Organic solvent topical report

    Energy Technology Data Exchange (ETDEWEB)

    Cowley, W.L.

    1998-04-30

    This report is the technical basis for the accident and consequence analyses used in the Hanford Tank Farms Basis for Interim Operation. The report also contains the scientific and engineering information and reference material needed to understand the organic solvent safety issue. This report includes comments received from the Chemical Reactions Subcommittee of the Tank Advisory Panel.

  10. Organic solvent topical report

    International Nuclear Information System (INIS)

    COWLEY, W.L.

    1999-01-01

    This report provides the basis for closing the organic solvent safety issue. Sufficient information is presented to conclude that risk posed by an organic solvent fire is within risk evaluation guidelines. This report updates information contained in Analysis of Consequences of Postulated Solvent Fires in Hanford Site Waste Tanks. WHC-SD-WM-CN-032. Rev. 0A (Cowley et al. 1996). However, this document will not replace Cowley et al (1996) as the primary reference for the Basis for Interim Operation (BIO) until the recently submitted BIO amendment (Hanson 1999) is approved by the US Department of Energy. This conclusion depends on the use of controls for preventing vehicle fuel fires and for limiting the use of flame cutting in areas where hot metal can fall on the waste surface.The required controls are given in the Tank Waste Remediation System Technical Safety Requirements (Noorani 1997b). This is a significant change from the conclusions presented in Revision 0 of this report. Revision 0 of this calcnote concluded that some organic solvent fire scenarios exceeded risk evaluation guidelines, even with controls imposed

  11. Organic solvent topical report

    International Nuclear Information System (INIS)

    Cowley, W.L.

    1998-01-01

    This report is the technical basis for the accident and consequence analyses used in the Hanford Tank Farms Basis for Interim Operation. The report also contains the scientific and engineering information and reference material needed to understand the organic solvent safety issue. This report includes comments received from the Chemical Reactions Subcommittee of the Tank Advisory Panel

  12. DESIGNING GREENER SOLVENTS

    Science.gov (United States)

    Computer-aided design of chemicals and chemical mixtures provides a powerful tool to help engineers identify cleaner process designs and more-benign alternatives to toxic industrial solvents. Three software programs are discussed: (1) PARIS II (Program for Assisting the Replaceme...

  13. Can green solvents be alternatives for thermal stabilization of collagen?

    Science.gov (United States)

    Mehta, Ami; Rao, J Raghava; Fathima, Nishter Nishad

    2014-08-01

    "Go Green" campaign is gaining light for various industrial applications where water consumption needs to be reduced. To resolve this, industries have adopted usage of green, organic solvents, as an alternative to water. For leather making, tanning industry consumes gallons of water. Therefore, for adopting green solvents in leather making, it is necessary to evaluate its influence on type I collagen, the major protein present in the skin matrix. The thermal stability of collagen from rat tail tendon fiber (RTT) treated with seven green solvents namely, ethanol, ethyl lactate, ethyl acetate, propylene carbonate, propylene glycol, polyethylene glycol-200 and heptane was determined using differential scanning calorimetry (DSC). Crosslinking efficiency of basic chromium sulfate and wattle on RTT in green solvents was determined. DSC thermograms show increase in thermal stability of RTT collagen against heat with green solvents (>78°C) compared to water (63°C). In the presence of crosslinkers, RTT demonstrated thermal stability >100°C in some green solvents, resulting in increased intermolecular forces between collagen, solvent and crosslinkers. The significant improvement in thermal stability of collagen potentiates the capability of green solvents as an alternative for water. Copyright © 2014 Elsevier B.V. All rights reserved.

  14. Nanofiltration-Enabled In Situ Solvent and Reagent Recycle for Sustainable Continuous-Flow Synthesis.

    Science.gov (United States)

    Fodi, Tamas; Didaskalou, Christos; Kupai, Jozsef; Balogh, Gyorgy T; Huszthy, Peter; Szekely, Gyorgy

    2017-09-11

    Solvent usage in the pharmaceutical sector accounts for as much as 90 % of the overall mass during manufacturing processes. Consequently, solvent consumption poses significant costs and environmental burdens. Continuous processing, in particular continuous-flow reactors, have great potential for the sustainable production of pharmaceuticals but subsequent downstream processing remains challenging. Separation processes for concentrating and purifying chemicals can account for as much as 80 % of the total manufacturing costs. In this work, a nanofiltration unit was coupled to a continuous-flow rector for in situ solvent and reagent recycling. The nanofiltration unit is straightforward to implement and simple to control during continuous operation. The hybrid process operated continuously over six weeks, recycling about 90 % of the solvent and reagent. Consequently, the E-factor and the carbon footprint were reduced by 91 % and 19 %, respectively. Moreover, the nanofiltration unit led to a solution of the product eleven times more concentrated than the reaction mixture and increased the purity from 52.4 % to 91.5 %. The boundaries for process conditions were investigated to facilitate implementation of the methodology by the pharmaceutical sector. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. An Ultrahigh-Performance Liquid Chromatography-Time-of-Flight Mass Spectrometry Metabolomic Approach to Studying the Impact of Moderate Red-Wine Consumption on Urinary Metabolome.

    Science.gov (United States)

    Esteban-Fernández, Adelaida; Ibañez, Clara; Simó, Carolina; Bartolomé, Begoña; Moreno-Arribas, M Victoria

    2018-04-06

    Moderate red-wine consumption has been widely described to exert several benefits in human health. This is mainly due to its unique content of bioactive polyphenols, which suffer several modifications along their pass through the digestive system, including microbial transformation in the colon and phase-II metabolism, until they are finally excreted in urine and feces. To determine the impact of moderate wine consumption in the overall urinary metabolome of healthy volunteers ( n = 41), samples from a red-wine interventional study (250 mL/day, 28 days) were investigated. Urine (24 h) was collected before and after intervention and analyzed by an untargeted ultrahigh-performance liquid chromatography-time-of-flight mass spectrometry metabolomics approach. 94 compounds linked to wine consumption, including specific wine components (tartaric acid), microbial-derived phenolic metabolites (5-(dihydroxyphenyl)-γ-valerolactones and 4-hydroxyl-5-(phenyl)-valeric acids), and endogenous compounds were identified. Also, some relationships between parallel fecal and urinary metabolomes are discussed.

  16. Researches on Nutritional Behaviour in Romanian Black and White Primiparous Cows. Interruptions Number and their Duration in the Ration Consumption Time

    Directory of Open Access Journals (Sweden)

    Silvia Erina

    2012-10-01

    Full Text Available The study was carried out on 9 Romanian Black and White primiparous cows. The aim of this study was todetermine some aspect of nutritional behaviour of the cows. During the experiments, the following behaviour aspectswere determined: interruption number and their duration in the feed consumption time. Results showed that theadministration order of forages had an influence on the interruptions number, which was 0.74 less for hay in fibroussucculentorder (O1. For silage, the interruption number was 0.42 higher in fibrous-succulent order (O1. Betweenportion 1 (P1 and portion 3 (P3, the significant difference (p<0.05 was for interruptions duration, duringconsumption silage, in favour portion P1. Distinct significant differences (p<0.01 was observed for the interruptionnumber during consumption silage (0.95 sec. higher in P1 than in P3, for interruption duration (5.96 sec. higher inP1 than in P3. Between P2 and P3, significant difference (p<0.05 was observed for interruptions number duringconsumption silage and for average interruptions duration during consumption beet in favour to portion P2.Regarding the number of feedings per portion, always the differences were higher in the second feeding F1 than inthe first feeding F2.

  17. Single Stage Contactor Testing Of The Next Generation Solvent Blend

    Energy Technology Data Exchange (ETDEWEB)

    Herman, D. T.; Peters, T. B.; Duignan, M. R.; Williams, M. R.; Poirier, M. R.; Brass, E. A.; Garrison, A. G.; Ketusky, E. T.

    2014-01-06

    The Modular Caustic Side Solvent Extraction (CSSX) Unit (MCU) facility at the Savannah River Site (SRS) is actively pursuing the transition from the current BOBCalixC6 based solvent to the Next Generation Solvent (NGS)-MCU solvent to increase the cesium decontamination factor. To support this integration of NGS into the MCU facility the Savannah River National Laboratory (SRNL) performed testing of a blend of the NGS (MaxCalix based solvent) with the current solvent (BOBCalixC6 based solvent) for the removal of cesium (Cs) from the liquid salt waste stream. This testing utilized a blend of BOBCalixC6 based solvent and the NGS with the new extractant, MaxCalix, as well as a new suppressor, tris(3,7dimethyloctyl) guanidine. Single stage tests were conducted using the full size V-05 and V-10 liquid-to-liquid centrifugal contactors installed at SRNL. These tests were designed to determine the mass transfer and hydraulic characteristics with the NGS solvent blended with the projected heel of the BOBCalixC6 based solvent that will exist in MCU at time of transition. The test program evaluated the amount of organic carryover and the droplet size of the organic carryover phases using several analytical methods. The results indicate that hydraulically, the NGS solvent performed hydraulically similar to the current solvent which was expected. For the organic carryover 93% of the solvent is predicted to be recovered from the stripping operation and 96% from the extraction operation. As for the mass transfer, the NGS solvent significantly improved the cesium DF by at least an order of magnitude when extrapolating the One-stage results to actual Seven-stage extraction operation with a stage efficiency of 95%.

  18. Solvent extraction studies in miniature centrifugal contactors

    International Nuclear Information System (INIS)

    Siczek, A.A.; Meisenhelder, J.H.; Bernstein, G.J.; Steindler, M.J.

    1980-01-01

    A miniature short-residence-time centrifugal solvent extraction contactor and an eight-stage laboratory minibank of centrifugal contactors were used for testing the possibility of utilizing kinetic effects for improving the separation of uranium from ruthenium and zirconium in the Purex process. Results of these tests showed that a small improvement found in ruthenium and zirconium decontamination in single-stage solvent extraction tests was lost in the multistage extraction tests- in fact, the extent of saturation of the solvent by uranium, rather than the stage residence time, controlled the extent of ruthenium and zirconium extraction. In applying the centrifugal contactor to the Purex process, the primary advantages would be less radiolytic damage to the solvent, high troughput, reduced solvent inventory, and rapid attainment of steady-state operating conditions. The multistage mini contactor was also tested to determine the suitability of short-residence-time contactors for use with the Civex and Thorex processes and was found to be compatible with the requirements of these processes. (orig.) [de

  19. Timing of probiotic milk consumption during pregnancy and effects on the incidence of preeclampsia and preterm delivery: a prospective observational cohort study in Norway

    Science.gov (United States)

    Nordqvist, Mahsa; Jacobsson, Bo; Brantsæter, Anne-Lise; Myhre, Ronny; Nilsson, Staffan; Sengpiel, Verena

    2018-01-01

    Objectives To investigate whether the timing of probiotic milk intake before, during early or late pregnancy influences associations with preeclampsia and preterm delivery. Design Population based prospective cohort study. Setting Norway, between 1999 and 2008. Participants 70 149 singleton pregnancies resulting in live-born babies from the Norwegian Mother and Child Cohort Study (no chronic disease, answered questionnaires, no placenta previa/cerclage/serious malformation of fetus, first enrolment pregnancy). Only nulliparous women (n=37 050) were included in the preeclampsia analysis. Both iatrogenic and spontaneous preterm delivery (between gestational weeks 22+0 and 36+6) with spontaneous term controls (between gestational weeks 39+0 and 40+6) were included in the preterm delivery analysis resulting in 34 458 cases. Main outcome measures Adjusted OR for preeclampsia and preterm delivery according to consumption of probiotic milk at three different time periods (before pregnancy, during early and late pregnancy). Results Probiotic milk intake in late pregnancy (but not before or in early pregnancy) was significantly associated with lower preeclampsia risk (adjusted OR: 0.80 (95% CI 0.68 to 0.94) p-value: 0.007). Probiotic intake during early (but not before or during late pregnancy) was significantly associated with lower risk of preterm delivery (adjusted OR: 0.79 (0.64 to 0.97) p-value: 0.03). Conclusions In this observational study, we found an association between timing of probiotic milk consumption during pregnancy and the incidence of the adverse pregnancy outcomes preeclampsia and preterm delivery. If future randomised controlled trials could establish a causal association between probiotics consumption and reduced risk of preeclampsia and preterm delivery, recommending probiotics would be a promising public health measure to reduce these adverse pregnancy outcomes. PMID:29362253

  20. Hydrogenation of Isophthalonitrile with 1-Methylimidazole as an Effective Solvent for m-Xylenediamine Production

    Energy Technology Data Exchange (ETDEWEB)

    Chae, Tae Young; Row, Sung Wook; Yoo, Kye Sang; Lee, Sang Duek [Environment and Process Technology Division, Seoul (Korea, Republic of); Lee, Do Weon [University of Seoul, Seoul (Korea, Republic of)

    2006-03-15

    1-methylimidazole was shown to outperform the other organic solvents in this reaction. Moreover, amount of ammonia with using 1-methylimidazole as a solvent was lower than other processes. Thus, 1-methylimidazole is an attractive solvent in IPN hydrogenation for the production of MXDA. The correct choice of a solvent is a critical factor to govern the catalytic activity with desirable hydrogenation. Conventionally, organic materials such as aromatic hydrocarbons, aliphatic alcohols, aliphatic hydrocarbons, dimethylformamide and dioxane were employed in this reaction. Several MXDA producing processes with the organic solvent including m-xylene, pseudocumene, mesitylene, ethylbenzene, methylpyridine, benzonitrile, m-tolunitrile, MXDA and cyanopyridine were disclosed. However, the solvents and ammonia were vaporized under the operation conditions leading to amine cleavage with the resulting formation of methylbenzyl amines or the consumption of ammonia was still significant. Recently, some researchers reported that a high yield of MXDA was achieved using isopropanol under relatively low pressure condition; however, the consumption of ammonia was very significant.

  1. Solvent selection methodology for pharmaceutical processes: Solvent swap

    DEFF Research Database (Denmark)

    Papadakis, Emmanouil; Kumar Tula, Anjan; Gani, Rafiqul

    2016-01-01

    A method for the selection of appropriate solvents for the solvent swap task in pharmaceutical processes has been developed. This solvent swap method is based on the solvent selection method of Gani et al. (2006) and considers additional selection criteria such as boiling point difference...... in pharmaceutical processes as well as new solvent swap alternatives. The method takes into account process considerations such as batch distillation and crystallization to achieve the swap task. Rigorous model based simulations of the swap operation are performed to evaluate and compare the performance...

  2. Improvements in solvent extraction columns

    International Nuclear Information System (INIS)

    Aughwane, K.R.

    1987-01-01

    Solvent extraction columns are used in the reprocessing of irradiated nuclear fuel. For an effective reprocessing operation a solvent extraction column is required which is capable of distributing the feed over most of the column. The patent describes improvements in solvent extractions columns which allows the feed to be distributed over an increased length of column than was previously possible. (U.K.)

  3. Solvent extraction columns

    International Nuclear Information System (INIS)

    Middleton, P.; Smith, J.R.

    1979-01-01

    In pulsed columns for use in solvent extraction processes, e.g. the reprocessing of nuclear fuel, the horizontal perforated plates inside the column are separated by interplate spacers manufactured from metallic neutron absorbing material. The spacer may be in the form of a spiral or concentric circles separated by radial limbs, or may be of egg-box construction. Suitable neutron absorbing materials include stainless steel containing boron or gadolinium, hafnium metal or alloys of hafnium. (UK)

  4. Hazardous solvent substitution

    International Nuclear Information System (INIS)

    Twitchell, K.E.

    1995-01-01

    Eliminating hazardous solvents is good for the environment, worker safety, and the bottom line. However, even though we are motivated to find replacements, the big question is 'What can we use as replacements for hazardous solvents?'You, too, can find replacements for your hazardous solvents. All you have to do is search for them. Search through the vendor literature of hundreds of companies with thousands of products. Ponder the associated material safety data sheets, assuming of course that you can obtain them and, having obtained them, that you can read them. You will want to search the trade magazines and other sources for product reviews. You will want to talk to users about how well the product actually works. You may also want to check US Environmental Protection Agency (EPA) and other government reports for toxicity and other safety information. And, of course, you will want to compare the product's constituent chemicals with the many hazardous constituency lists to ensure the safe and legal use of the product in your workplace

  5. Solvent distillation studies for a purex reprocessing plant

    International Nuclear Information System (INIS)

    Ginisty, C.; Guillaume, B.

    1990-01-01

    A distillation system has been developed for regeneration of Purex solvent and will be implemented for the first time in a reprocessing plant. The results are described and analyzed, with emphasis on laboratory experiments which were made with a radioactive plant solvent. Particularly the distillation provides a good separation of solvent degradation products, which was verified by measurements of interfacial tension and plutonium or ruthenium retention. 16 refs., 3 figs., 5 tabs

  6. The relationship between hours of sleep, screen time and frequency of food and drink consumption in Spain in the 2011 and 2013 ALADINO: a cross-sectional study.

    Science.gov (United States)

    Pérez-Farinós, Napoleón; Villar-Villalba, Carmen; López Sobaler, Ana María; Dal Re Saavedra, María Ángeles; Aparicio, Aránzazu; Santos Sanz, Sara; Robledo de Dios, Teresa; Castrodeza-Sanz, José Javier; Ortega Anta, Rosa María

    2017-01-06

    The frequency of intake of food and beverages depends on a number of ill-defined behaviour patterns. The objectives of this study were to evaluate the effects of screen time and sleep duration on food consumption frequency, and to describe frequencies and types of food consumption according to BMI category and parents' level of education. We studied 6287 and 2806 children drawn from the 2011 and 2013 cross-sectional ALADINO studies respectively. Data were collected on number of hours of sleep, screen time, and weekly frequency of consumption of 17 food groups. Weight status was measured, and information was also collected on parents' educational level. Average food consumption frequencies were calculated by reference to hours of sleep and hours of screen time, and were defined as ≥4 times or education. High levels of screen time were associated with a greater frequency of consumption of energy-dense, micronutrient-poor products and a lower frequency of consumption of fruit and vegetables. Sleeping a sufficient number of hours was associated with a higher consumption of fruit and vegetables. The results for 2011 were concordant with those for 2013. If efforts to ensure healthier eating habits among children are to be at all successful, they should focus on promoting a sufficient amount of sleep for children, limiting the time they spend watching television and/or playing with computers or video games, and educating parents accordingly.

  7. SOLVENT FIRE BY-PRODUCTS

    Energy Technology Data Exchange (ETDEWEB)

    Walker, D; Samuel Fink, S

    2006-05-22

    Southwest Research Institute (SwRI) conducted a burn test of the Caustic-Side Solvent Extraction (CSSX) solvent to determine the combustion products. The testing showed hydrogen fluoride gas is not a combustion product from a solvent fire when up to 70% of the solvent is consumed. The absence of HF in the combustion gases may reflect concentration of the modifier containing the fluoride groups in the unburned portion. SwRI reported results for other gases (CO, HCN, NOx, formaldehyde, and hydrocarbons). The results, with other supporting information, can be used for evaluating the consequences of a facility fire involving the CSSX solvent inventory.

  8. [Effects of deep plowing time during the fallow period on water storage-consumption characteristics and wheat yield in dry-land soil.

    Science.gov (United States)

    Dang, Jian You; Pei, Xue Xia; Zhang, Ding Yi; Wang, Jiao Ai; Zhang, Jing; Wu, Xue Ping

    2016-09-01

    Through a three-year field trail, effects of deep plowing time during the fallow period on water storage of 0-200 cm soil before sowing, water consumption of growth period, and growth and development of wheat were investigated. Results demonstrated that soil water storage (SWS) of the fallow period was influenced by deep plowing time, precipitation, and rainfall distribution. With postponing the time of deep plowing in the fallow period, SWS was increased firstly, and then decreased. SWS with deep plowing in early or middle of August was 23.9-45.8 mm more than that with deep plowing in mid-July. It would benefit SWS when more precipitation occurred in the fallow period or more rainfall was distributed in August and September. Deep plowing at a proper time could facilitate SWS, N and P absorption of wheat, and the number of stems before winter and the spike number. The yield of wheat with deep plowing in early or middle August was 3.67%-18.2% higher than that with deep plowing in mid-July, and it was positively correlated with water storage of 0-200 cm soil during the fallow period and SWS of each soil layer during the wheat growth period. However, this correlation coefficient would be weakened by adequate rainfall in spring, the critical growing period for wheat. The time of deep plowing mainly affected the water consumption at soil layer of 60-140 cm during wheat growth. Under current farming conditions of south Shanxi, the increased grain yield of wheat could be achieved by combining the measures of high wheat stubble and wheat straw covering for holding soil water and deep plowing between the Beginning of Autumn (August 6th) and the Limit of Heat (August 21st) for promoting soil water penetration characteristics to improve the number of stems before winter and spike.

  9. Assembling consumption

    DEFF Research Database (Denmark)

    Assembling Consumption marks a definitive step in the institutionalisation of qualitative business research. By gathering leading scholars and educators who study markets, marketing and consumption through the lenses of philosophy, sociology and anthropology, this book clarifies and applies...... the investigative tools offered by assemblage theory, actor-network theory and non-representational theory. Clear theoretical explanation and methodological innovation, alongside empirical applications of these emerging frameworks will offer readers new and refreshing perspectives on consumer culture and market...... societies. This is an essential reading for both seasoned scholars and advanced students of markets, economies and social forms of consumption....

  10. The extraction of essential oil from patchouli leaves (Pogostemon cablin Benth) using microwave hydrodistillation and solvent-free microwave extraction methods

    Science.gov (United States)

    Putri, D. K. Y.; Kusuma, H. S.; Syahputra, M. E.; Parasandi, D.; Mahfud, M.

    2017-12-01

    Patchouli plant (Pogostemon cablin Benth) is one of the important essential oil-producing plant, contributes more than 50% of total exports of Indonesia’s essential oil. However, the extraction of patchouli oil that has been done in Indonesia is generally still used conventional methods that require enormous amount of energy, high solvent usage, and long time of extraction. Therefore, in this study, patchouli oil extraction was carried out by using microwave hydrodistillation and solvent-free microwave extraction methods. Based on this research, it is known that the extraction of patchouli oil using microwave hydrodistillation method with longer extraction time (240 min) only produced patchouli oil’s yield 1.2 times greater than solvent-free microwave extraction method which require faster extraction time (120 min). Otherwise the analysis of electric consumption and the environmental impact, the solvent-free microwave extraction method showed a smaller amount when compared with microwave hydrodistillation method. It is conclude that the use of solvent-free microwave extraction method for patchouli oil extraction is suitably method as a new green technique.

  11. Measurement of oxygen transfer from air into organic solvents

    DEFF Research Database (Denmark)

    Ramesh, Hemalata; Mayr, Torsten; Hobisch, Mathias

    2016-01-01

    biological reactions require the supply of oxygen, most normally from air. However, reliable on-line measurements of oxygen concentration in organic solvents (and hence oxygen transfer rates from air to the solvent) has to date proven impossible due limitations in the current analytical methods. Results...... applications). Subsequently, we measured the oxygen transfer rates from air into these organic solvents. Conclusion The measurement of oxygen transfer rates from air into organic solvents using the dynamic method was established using the solvent resistant optical sensor. The feasibility of online oxygen...... For the first time, we demonstrate on-line oxygen measurements in non-aqueous media using a novel optical sensor. The sensor was used to measure oxygen concentration in various organic solvents including toluene, THF, isooctane, DMF, heptane and hexane (which have all been shown suitable for several biological...

  12. Recovery of acid-degraded tributyl phosphate by solvent extraction

    International Nuclear Information System (INIS)

    Young, G.C.; Holladay, D.W.

    1981-01-01

    During nuclear fuel reprocessing the organic solvent becomes loaded with various acidic degradation products, which can be effectively removed through solvent extraction. Studies have been made with a small bench-scale solvent extraction system to optimize such parameters as pH of aqueous phase, phase ratio, residence time, flow rates, and temperature. The necessary decontamination factors have been obtained for various degradation products during continuous solvent extraction in one stage, with the aqueous phase being recycled. The aqueous phase contains compounds that can be degraded to gases to minimize waste disposal problems

  13. [Time consumption and quality of an automated fusion tool for SPECT and MRI images of the brain].

    Science.gov (United States)

    Fiedler, E; Platsch, G; Schwarz, A; Schmiedehausen, K; Tomandl, B; Huk, W; Rupprecht, Th; Rahn, N; Kuwert, T

    2003-10-01

    Although the fusion of images from different modalities may improve diagnostic accuracy, it is rarely used in clinical routine work due to logistic problems. Therefore we evaluated performance and time needed for fusing MRI and SPECT images using a semiautomated dedicated software. PATIENTS, MATERIAL AND METHOD: In 32 patients regional cerebral blood flow was measured using (99m)Tc ethylcystein dimer (ECD) and the three-headed SPECT camera MultiSPECT 3. MRI scans of the brain were performed using either a 0,2 T Open or a 1,5 T Sonata. Twelve of the MRI data sets were acquired using a 3D-T1w MPRAGE sequence, 20 with a 2D acquisition technique and different echo sequences. Image fusion was performed on a Syngo workstation using an entropy minimizing algorithm by an experienced user of the software. The fusion results were classified. We measured the time needed for the automated fusion procedure and in case of need that for manual realignment after automated, but insufficient fusion. The mean time of the automated fusion procedure was 123 s. It was for the 2D significantly shorter than for the 3D MRI datasets. For four of the 2D data sets and two of the 3D data sets an optimal fit was reached using the automated approach. The remaining 26 data sets required manual correction. The sum of the time required for automated fusion and that needed for manual correction averaged 320 s (50-886 s). The fusion of 3D MRI data sets lasted significantly longer than that of the 2D MRI data. The automated fusion tool delivered in 20% an optimal fit, in 80% manual correction was necessary. Nevertheless, each of the 32 SPECT data sets could be merged in less than 15 min with the corresponding MRI data, which seems acceptable for clinical routine use.

  14. Time consumption and quality of an automated fusion tool for SPECT and MRI images of the brain

    International Nuclear Information System (INIS)

    Fiedler, E.; Platsch, G.; Schwarz, A.; Schmiedehausen, K.; Kuwert, T.; Tomandl, B.; Huk, W.; Rupprecht, Th.; Rahn, N.

    2003-01-01

    Aim: Although the fusion of images from different modalities may improve diagnostic accuracy, it is rarely used in clinical routine work due to logistic problems. Therefore we evaluated performance and time needed for fusing MRI and SPECT images using a semiautomated dedicated software. Patients, material and method: In 32 patients regional cerebral blood flow was measured using 99m Tc ethylcystein dimer (ECD) and the three-headed SPECT camera MultiSPECT 3. MRI scans of the brain were performed using either a 0,2 T Open or a 1,5 T Sonata. Twelve of the MRI data sets were acquired using a 3 D-T1 w MPRAGE sequence, 20 with a 2D acquisition technique and different echo sequences. Image fusion was performed on a Syngo workstation using an entropy minimizing algorithm by an experienced user of the software. The fusion results were classified. We measured the time needed for the automated fusion procedure and in case of need that for manual realignment after automated, but insufficient fusion. Results: The mean time of the automated fusion procedure was 123 s. It was for the 2D significantly shorter than for the 3D MRI datasets. For four of the 2D data sets and two of the 3D data sets an optimal fit was reached using the automated approach. The remaining 26 data sets required manual correction. The sum of the time required for automated fusion and that needed for manual correction averaged 320 s (50-886 s). Conclusion: The fusion of 3D MRI data sets lasted significantly longer than that of the 2D MRI data. The automated fusion tool delivered in 20% an optimal fit, in 80% manual correction was necessary. Nevertheless, each of the 32 SPECT data sets could be merged in less than 15 min with the corresponding MRI data, which seems acceptable for clinical routine use. (orig.) [de

  15. A Real-Time Recording Model of Key Indicators for Energy Consumption and Carbon Emissions of Sustainable Buildings

    Directory of Open Access Journals (Sweden)

    Weiwei Wu

    2014-05-01

    Full Text Available Buildings’ sustainability is one of the crucial parts for achieving urban sustainability. Applied to buildings, life-cycle assessment encompasses the analysis and assessment of the environmental effects of building materials, components and assemblies throughout the entire life of the building construction, use and demolition. Estimate of carbon emissions is essential and crucial for an accurate and reasonable life-cycle assessment. Addressing the need for more research into integrating analysis of real-time and automatic recording of key indicators for a more accurate calculation and comparison, this paper aims to design a real-time recording model of these crucial indicators concerning the calculation and estimation of energy use and carbon emissions of buildings based on a Radio Frequency Identification (RFID-based system. The architecture of the RFID-based carbon emission recording/tracking system, which contains four functional layers including data record layer, data collection/update layer, data aggregation layer and data sharing/backup layer, is presented. Each of these layers is formed by RFID or network devices and sub-systems that operate at a specific level. In the end, a proof-of-concept system is developed to illustrate the implementation of the proposed architecture and demonstrate the feasibility of the design. This study would provide the technical solution for real-time recording system of building carbon emissions and thus is of great significance and importance to improve urban sustainability.

  16. A Real-Time Recording Model of Key Indicators for Energy Consumption and Carbon Emissions of Sustainable Buildings

    Science.gov (United States)

    Wu, Weiwei; Yang, Huanjia; Chew, David; Hou, Yanhong; Li, Qiming

    2014-01-01

    Buildings' sustainability is one of the crucial parts for achieving urban sustainability. Applied to buildings, life-cycle assessment encompasses the analysis and assessment of the environmental effects of building materials, components and assemblies throughout the entire life of the building construction, use and demolition. Estimate of carbon emissions is essential and crucial for an accurate and reasonable life-cycle assessment. Addressing the need for more research into integrating analysis of real-time and automatic recording of key indicators for a more accurate calculation and comparison, this paper aims to design a real-time recording model of these crucial indicators concerning the calculation and estimation of energy use and carbon emissions of buildings based on a Radio Frequency Identification (RFID)-based system. The architecture of the RFID-based carbon emission recording/tracking system, which contains four functional layers including data record layer, data collection/update layer, data aggregation layer and data sharing/backup layer, is presented. Each of these layers is formed by RFID or network devices and sub-systems that operate at a specific level. In the end, a proof-of-concept system is developed to illustrate the implementation of the proposed architecture and demonstrate the feasibility of the design. This study would provide the technical solution for real-time recording system of building carbon emissions and thus is of great significance and importance to improve urban sustainability. PMID:24831109

  17. Effects of solvent evaporation conditions on solvent vapor annealed cylinder-forming block polymer thin films

    Science.gov (United States)

    Grant, Meagan; Jakubowski, William; Nelson, Gunnar; Drapes, Chloe; Baruth, A.

    Solvent vapor annealing is a less time and energy intensive method compared to thermal annealing, to direct the self-assembly of block polymer thin films. Periodic nanostructures have applications in ultrafiltration, magnetic arrays, or other structures with nanometer dimensions, driving its continued interest. Our goal is to create thin films with hexagonally packed, perpendicular aligned cylinders of poly(lactide) in a poly(styrene) matrix that span the thickness of the film with low anneal times and low defect densities, all with high reproducibility, where the latter is paramount. Through the use of our computer-controlled, pneumatically-actuated, purpose-built solvent vapor annealing chamber, we have the ability to monitor and control vapor pressure, solvent concentration within the film, and solvent evaporation rate with unprecedented precision and reliability. Focusing on evaporation, we report on two previously unexplored areas, chamber pressure during solvent evaporation and the flow rate of purging gas aiding the evaporation. We will report our exhaustive results following atomic force microscopy analysis of films exposed to a wide range of pressures and flow rates. Reliably achieving well-ordered films, while occurring within a large section of this parameter space, was correlated with high-flow evaporation rates and low chamber pressures. These results have significant implications on other methods of solvent annealing, including ``jar'' techniques.

  18. The Effect of Time dealumination and Solvent Concentration in Synthesis of Zeolite Catalyst and Catalytic Test for DiEthyl Ether Production Process

    International Nuclear Information System (INIS)

    Widayat; Roesyadi, A.; Rachimoellah, M.

    2009-01-01

    Ethanol is an alternative energy, but its has three distinct disadvantages as a transportation fuel. Its availability is currently limited, and it has a lower volumetric heating value and a lower Reid vapour pressure (RVP) than gasoline. This paper focuses for this disadvantages and to solve this problem can do with converts ethanol to DiEthyl Ether product. This research produced DiEthyl Ether by ethanol dehydration process with zeolite as catalyst. The catalyst synthesis from natural material from District Gunung Kidul, Indonesia. The catalyst produced with dealumination, neutralization, drying and calcination processes. The zeolite catalyst was analysed of Si/Al, X-ray Diffraction and specific surface area. The catalyst product then used for ethanol dehydration to produce DiEthyl Ether. The results shown the biggest surface area is 184,52 m 2 /gram at catalyst production at 10 hours for time dealumination. The crystallite of catalyst product is similar like shown at diffractogram of XRD analysis. The ratio Si/Al biggest is 313.7 that obtaining at catalyst production with 7 hours for time dealumination. The catalytic test use fixed bed reactor with 1 inci diameter and ethanol fermentation both as feed. The operation condition is 150 deg. C at temperature and atmosphere pressure. The compounds product in liquid phase are diethyl ether, methanol and water.

  19. Life-time risk of mortality due to different levels of alcohol consumption in seven European countries: implications for low-risk drinking guidelines.

    Science.gov (United States)

    Shield, Kevin D; Gmel, Gerrit; Gmel, Gerhard; Mäkelä, Pia; Probst, Charlotte; Room, Robin; Rehm, Jürgen

    2017-09-01

    Low-risk alcohol drinking guidelines require a scientific basis that extends beyond individual or group judgements of risk. Life-time mortality risks, judged against established thresholds for acceptable risk, may provide such a basis for guidelines. Therefore, the aim of this study was to estimate alcohol mortality risks for seven European countries based on different average daily alcohol consumption amounts. The maximum acceptable voluntary premature mortality risk was determined to be one in 1000, with sensitivity analyses of one in 100. Life-time mortality risks for different alcohol consumption levels were estimated by combining disease-specific relative risk and mortality data for seven European countries with different drinking patterns (Estonia, Finland, Germany, Hungary, Ireland, Italy and Poland). Alcohol consumption data were obtained from the Global Information System on Alcohol and Health, relative risk data from meta-analyses and mortality information from the World Health Organization. The variation in the life-time mortality risk at drinking levels relevant for setting guidelines was less than that observed at high drinking levels. In Europe, the percentage of adults consuming above a risk threshold of one in 1000 ranged from 20.6 to 32.9% for women and from 35.4 to 54.0% for men. Life-time risk of premature mortality under current guideline maximums ranged from 2.5 to 44.8 deaths per 1000 women in Finland and Estonia, respectively, and from 2.9 to 35.8 deaths per 1000 men in Finland and Estonia, respectively. If based upon an acceptable risk of one in 1000, guideline maximums for Europe should be 8-10 g/day for women and 15-20 g/day for men. If low-risk alcohol guidelines were based on an acceptable risk of one in 1000 premature deaths, then maximums for Europe should be 8-10 g/day for women and 15-20 g/day for men, and some of the current European guidelines would require downward revision. © 2017 Society for the Study of Addiction.

  20. Solvent effects in chemistry

    CERN Document Server

    Buncel, Erwin

    2015-01-01

    This book introduces the concepts, theory and experimental knowledge concerning solvent effects on the rate and equilibrium of chemical reactions of all kinds.  It begins with basic thermodynamics and kinetics, building on this foundation to demonstrate how a more detailed understanding of these effects may be used to aid in determination of reaction mechanisms, and to aid in planning syntheses. Consideration is given to theoretical calculations (quantum chemistry, molecular dynamics, etc.), to statistical methods (chemometrics), and to modern day concerns such as ""green"" chemistry, where ut

  1. Trends in US home food preparation and consumption: analysis of national nutrition surveys and time use studies from 1965-1966 to 2007-2008.

    Science.gov (United States)

    Smith, Lindsey P; Ng, Shu Wen; Popkin, Barry M

    2013-04-11

    It has been well-documented that Americans have shifted towards eating out more and cooking at home less. However, little is known about whether these trends have continued into the 21st century, and whether these trends are consistent amongst low-income individuals, who are increasingly the target of public health programs that promote home cooking. The objective of this study is to examine how patterns of home cooking and home food consumption have changed from 1965 to 2008 by socio-demographic groups. This is a cross-sectional analysis of data from 6 nationally representative US dietary surveys and 6 US time-use studies conducted between 1965 and 2008. Subjects are adults aged 19 to 60 years (n= 38,565 for dietary surveys and n=55,424 for time-use surveys). Weighted means of daily energy intake by food source, proportion who cooked, and time spent cooking were analyzed for trends from 1965-1966 to 2007-2008 by gender and income. T-tests were conducted to determine statistical differences over time. The percentage of daily energy consumed from home food sources and time spent in food preparation decreased significantly for all socioeconomic groups between 1965-1966 and 2007-2008 (p ≤ 0.001), with the largest declines occurring between 1965 and 1992. In 2007-2008, foods from the home supply accounted for 65 to 72% of total daily energy, with 54 to 57% reporting cooking activities. The low income group showed the greatest decline in the proportion cooking, but consumed more daily energy from home sources and spent more time cooking than high income individuals in 2007-2008 (p ≤ 0.001). US adults have decreased consumption of foods from the home supply and reduced time spent cooking since 1965, but this trend appears to have leveled off, with no substantial decrease occurring after the mid-1990's. Across socioeconomic groups, people consume the majority of daily energy from the home food supply, yet only slightly more than half spend any time cooking on a given

  2. Trends in US home food preparation and consumption: analysis of national nutrition surveys and time use studies from 1965–1966 to 2007–2008

    Science.gov (United States)

    2013-01-01

    Background It has been well-documented that Americans have shifted towards eating out more and cooking at home less. However, little is known about whether these trends have continued into the 21st century, and whether these trends are consistent amongst low-income individuals, who are increasingly the target of public health programs that promote home cooking. The objective of this study is to examine how patterns of home cooking and home food consumption have changed from 1965 to 2008 by socio-demographic groups. Methods This is a cross-sectional analysis of data from 6 nationally representative US dietary surveys and 6 US time-use studies conducted between 1965 and 2008. Subjects are adults aged 19 to 60 years (n= 38,565 for dietary surveys and n=55,424 for time-use surveys). Weighted means of daily energy intake by food source, proportion who cooked, and time spent cooking were analyzed for trends from 1965–1966 to 2007–2008 by gender and income. T-tests were conducted to determine statistical differences over time. Results The percentage of daily energy consumed from home food sources and time spent in food preparation decreased significantly for all socioeconomic groups between 1965–1966 and 2007–2008 (p ≤ 0.001), with the largest declines occurring between 1965 and 1992. In 2007–2008, foods from the home supply accounted for 65 to 72% of total daily energy, with 54 to 57% reporting cooking activities. The low income group showed the greatest decline in the proportion cooking, but consumed more daily energy from home sources and spent more time cooking than high income individuals in 2007–2008 (p ≤ 0.001). Conclusions US adults have decreased consumption of foods from the home supply and reduced time spent cooking since 1965, but this trend appears to have leveled off, with no substantial decrease occurring after the mid-1990’s. Across socioeconomic groups, people consume the majority of daily energy from the home food supply, yet only

  3. Energy consumption: Past, present, future

    Science.gov (United States)

    1973-01-01

    The energy consumption history of the United States and the changes which could occur in consumption characteristics in the next 50 years are presented. The various sources of energy are analyzed to show the limitations involved in development and utilization as a function of time available. Several scenarios were prepared to show the consumption and supply of energy under varying conditions.

  4. Solvent effects in the synergistic solvent extraction of Co2+

    International Nuclear Information System (INIS)

    Kandil, A.T.; Ramadan, A.

    1979-01-01

    The extraction of Co 2+ from a 0.1M ionic strength aqueous phase (Na + , CH 3 COOH) of pH = 5.1 was studied using thenoyltrifluoroacetone, HTTA, in eight different solvents and HTTA + trioctylphosphine oxide, TOPO, in the same solvents. A comparison of the effect of solvent dielectric constant on the equilibrium constant shows a synergism as a result of the increased hydrophobic character imparted to the metal complex due to the formation of the TOPO adduct. (author)

  5. Childhood Fish Consumption and Learning and Behavioral Disorders

    Directory of Open Access Journals (Sweden)

    Jenny L. Carwile

    2016-11-01

    Full Text Available Fish is a major source of nutrients critical for brain development during early life. The importance of childhood fish consumption is supported by several studies reporting associations of n-3 polyunsaturated fatty acid (n-3 PUFA supplementation with better behavior and school performance. However, fish may have a different effect than n-3 PUFA alone due to the neurotoxic effects of methylmercury, a frequent contaminant. We investigated associations of childhood fish consumption with learning and behavioral disorders in birth cohort study of the neurotoxic effects of early life exposure to solvent-contaminated drinking water. Childhood (age 7–12 years fish consumption and learning and behavioral problems were reported in self-administered questionnaires (age 23–41 at questionnaire completion. Fish consumption was not meaningfully associated with repeating a grade, tutoring, attending summer school, special class placement, or low educational attainment. However, participants who ate fish several times a week had an elevated odds of Attention Deficit Disorder/Attention Deficit Hyperactivity Disorder (odds ratio: 5.2; 95% confidence interval: 1.5–18 compared to participants who did not eat fish. While these findings generally support the safety of the observed level of fish consumption, the absence of a beneficial effect may be attributed to insufficient fish intake or the choice of relatively low n-3 PUFA fish.

  6. A Walnut-Enriched Diet Reduces Lipids in Healthy Caucasian Subjects, Independent of Recommended Macronutrient Replacement and Time Point of Consumption: a Prospective, Randomized, Controlled Trial.

    Science.gov (United States)

    Bamberger, Charlotte; Rossmeier, Andreas; Lechner, Katharina; Wu, Liya; Waldmann, Elisa; Stark, Renée G; Altenhofer, Julia; Henze, Kerstin; Parhofer, Klaus G

    2017-10-06

    Studies indicate a positive association between walnut intake and improvements in plasma lipids. We evaluated the effect of an isocaloric replacement of macronutrients with walnuts and the time point of consumption on plasma lipids. We included 194 healthy subjects (134 females, age 63 ± 7 years, BMI 25.1 ± 4.0 kg/m²) in a randomized, controlled, prospective, cross-over study. Following a nut-free run-in period, subjects were randomized to two diet phases (8 weeks each). Ninety-six subjects first followed a walnut-enriched diet (43 g walnuts/day) and then switched to a nut-free diet. Ninety-eight subjects followed the diets in reverse order. Subjects were also randomized to either reduce carbohydrates ( n = 62), fat ( n = 65), or both ( n = 67) during the walnut diet, and instructed to consume walnuts either as a meal or as a snack. The walnut diet resulted in a significant reduction in fasting cholesterol (walnut vs. -8.5 ± 37.2 vs. -1.1 ± 35.4 mg/dL; p = 0.002), non-HDL cholesterol (-10.3 ± 35.5 vs. -1.4 ± 33.1 mg/dL; p ≤ 0.001), LDL-cholesterol (-7.4 ± 32.4 vs. -1.7 ± 29.7 mg/dL; p = 0.029), triglycerides (-5.0 ± 47.5 vs. 3.7 ± 48.5 mg/dL; p = 0.015) and apoB (-6.7 ± 22.4 vs. -0.5 ± 37.7; p ≤ 0.001), while HDL-cholesterol and lipoprotein (a) did not change significantly. Neither macronutrient replacement nor time point of consumption significantly affected the effect of walnuts on lipids. Thus, 43 g walnuts/d improved the lipid profile independent of the recommended macronutrient replacement and the time point of consumption.

  7. Real-time sampling of reasons for hedonic food consumption: Further validation of the Palatable Eating Motives Scale

    Directory of Open Access Journals (Sweden)

    Mary M. Boggiano

    2015-06-01

    Full Text Available Highly palatable foods play a salient role in obesity and binge-eating, and if habitually eaten to deal with intrinsic and extrinsic factors unrelated to metabolic need, may compromise adaptive coping and interpersonal skills. This study used event sampling methodology (ESM to examine whether individuals who report eating palatable foods primarily to cope, to enhance reward, to be social, or to conform, as measured by the Palatable Eating Motives Scale (PEMS, actually eat these foods primarily for the motive(s they report on the PEMS. Secondly this study examined if the previously reported ability of the PEMS Coping motive to predict BMI would replicate if the real-time (ESM-reported coping motive was used to predict BMI. A total of 1691 palatable eating events were collected from 169 college students over 4 days. Each event included the day, time, and types of tasty foods or drinks consumed followed by a survey that included an abbreviated version of the PEMS, hunger as an additional possible motive, and a question assessing general perceived stress during the eating event. Two-level mixed modeling confirmed that ESM-reported motives correlated most strongly with their respective PEMS motives and that all were negatively associated with eating for hunger. While stress surrounding the eating event was strongly associated with the ESM-coping motive, its inclusion in the model as a predictor of this motive did not abolish the significant association between ESM and PEMS Coping scores. Regression models confirmed that scores on the ESM-coping motive predicted BMI. These findings provide ecological validity for the PEMS to identify true-to-life motives for consuming palatable foods. This further adds to the utility of the PEMS in individualizing, and hence improving, treatment strategies for obesity, binge-eating, dietary nutrition, coping, reward acquisition, and psychosocial skills.

  8. Solvent extraction of zirconium

    International Nuclear Information System (INIS)

    Kim, S.S.; Yoon, J.H.

    1981-01-01

    The extraction of zirconium(VI) from an aqueous solution of constant ionic strength with versatic acid-10 dissolved in benzen was studied as a function of pH and the concentration of zirconium(VI) and organic acid. The effects of sulphate and chlorine ions on the extraction of the zirconium(VI) were briefly examined. It was revealed that (ZrOR 2 .2RH) is the predominant species of extracted zirconium(VI) in the versatic acid-10. The chemical equation and the apparent equilibrium constants thereof have been determined as follows. (ZrOsup(2+))aq+ 2(R 2 H 2 )sub(org) = (ZrOR 2 .2RH)sub(org)+2(H + )aq Ksub(Zr) = (ZrOR 2 .2RH)sub(org)(H + ) 2 /(ZrOsup(2+))sub(aq)(R 2 H 2 )sup(2)sub(org) = 3.3 x 10 -7 . The synergistic effects of TBP and D2EHPA were also studied. In the mixed solvent with 0.1M TBP, the synergistic effect was observed, while the mixed solvent with D2EHPA showed the antisynergistic effect. (Author)

  9. MOLECULAR THERMODYNAMICS IN THE DESIGN OF SUBSTITUTE SOLVENTS

    Science.gov (United States)

    The use of physical properties and fluid behavior from molecular thermodynamics can lead to better decision making in the design of substitute solvents and can greatly reduce the expense and time required to find substitutes compared to designing solvents by experiment. this pape...

  10. Time consumption and productivity of skidding Silver fir (Abies alba Mill. round wood in reduced accessibility conditions: a case study in windthrow salvage logging form Romanian Carpathians

    Directory of Open Access Journals (Sweden)

    Stelian Alexandru Borz

    2013-11-01

    Full Text Available Natural calamities (especially windthrows may generate difficultwork conditions in timber harvesting operations. When associated with the reduced accessibility conditions, the work conditions become even harder. This study investigates the time consumptions on specific work elements in timber skidding, develops time prediction models for timber skidding work elements and assesses the production rates for timber skidding in reduced accessibility stands where windthrow salvage cuttings were applied.Following a time study done for two skidders (TAF 690 OP and TAF 657operating simultaneously in the same felling area, it has been found that, in average, in a delay free skidding cycle time, lateral winching accounted for a share of 26-33%, on-trail skidding accounted for a share of 64-71% and landing operations accounted for a share of 3%. Total delays accounted for 51% and 43% of the total work time in the case of TAF 690 OP skidder and TAF 657 skidder, respectively. Regression models for lateral winching(both skidders revealed that the winching distance and the number of logs were the relevant predictors for the time consumption estimation (p<0.01, whereas in the case of on-trail skidding only the skidding distance was relevant (p <0.01. For the overall skidding operation (excluding landingoperations winching and skidding distances were found as relevantpredictors (p <0.01 for 690 OP, whereas the number of logs became anadditional relevant predictor for 657. In conditions of an average winching distance of 19.90 m and an average on-trail skidding distance of 980.32 m, the time study yielded a net production rate of 7.70 m3 h-1 and a gross production rate of 3.75 m3 h-1 in the case of TAF 690 OP skidder. By comparison, in the case of TAF 657 skidder, for an average winching distance of 22.86 m and an average on-trail skidding distance of 871.00 m, the net and gross production rates were of 5.61 m3 h-1 and 3.20 m3 h-1 respectively.

  11. Time consumption and productivity of skidding Silver fir (Abies alba Mill. round wood in reduced accessibility conditions: a case study in windthrow salvage logging form Romanian Carpathians

    Directory of Open Access Journals (Sweden)

    Stelian Alexandru Borz

    2013-12-01

    Full Text Available Natural calamities (especially windthrows may generate difficult work conditions in timber harvesting operations. When associated with the reduced accessibility conditions, the work conditions become even harder. This study investigates the time consumptions on specific work elements in timber skidding, develops time prediction models for timber skidding work elements and assesses the production rates for timber skidding in reduced accessibility stands where windthrow salvage cuttings were applied. Following a time study done for two skidders (TAF 690 OP and TAF 657 operating simultaneously in the same felling area, it has been found that, in average, in a delay free skidding cycle time, lateral winching accounted for a share of 26-33%, on-trail skidding accounted for a share of 64-71% and landing operations accounted for a share of 3%.Total delays accounted for 51% and 43% of the total work time in the case of TAF 690 OP skidder and TAF 657skidder respectively. Regression models for lateral winching (both skidders revealed that the winching distance and the number of logs were the relevant predictors for the time consumption estimation (p<0.01, whereas in the case of on-trail skidding only the skidding distance was relevant (p<0.01. For the overall skidding operation (excluding landing operations winching and skidding distances were found as relevant predictors (p<0.01 in case of TAF 690 OP, whereas the number of logs became an additional relevant predictor in case of TAF 657.In conditions of an average winching distance of 19.90 m and an average on-trail skidding distance of 980.32 m, the time study yielded a net production rate of 7.70 m3h-1 and a gross production rate of 3.75 m3h-1 in the case of TAF 690 OP skidder. By comparison, in the case of TAF 657 skidder, for an average winching distance of 22.86 m and an average on-trail skidding distance of 871.00 m, the net and gross production rates were of 5.61 m3h-1 and 3.20 m3h-1 respectively.

  12. Work ability score of solvent-exposed workers.

    Science.gov (United States)

    Furu, Heidi; Sainio, Markku; Hyvärinen, Hanna-Kaisa; Kaukiainen, Ari

    2018-03-28

    Occupational chronic solvent encephalopathy (CSE), characterized by neurocognitive dysfunction, often leads to early retirement. However, only the more severe cases are diagnosed with CSE, and little is known about the work ability of solvent-exposed workers in general. The aim was to study memory and concentration symptoms, work ability and the effect of both solvent-related and non-occupational factors on work ability, in an actively working solvent-exposed population. A questionnaire on exposure and health was sent to 3640 workers in four solvent-exposed fields, i.e. painters and floor-layers, boat builders, printers, and metal workers. The total number of responses was 1730. We determined the work ability score (WAS), a single question item of the Work Ability Index, and studied solvent exposure, demographic factors, Euroquest memory and concentration symptoms, chronic diseases, and employment status using univariate and multivariate analyses. The findings were compared to those of a corresponding national blue-collar reference population (n = 221), and a small cohort of workers with CSE (n = 18). The proportion of workers with memory and concentration symptoms was significantly associated with solvent exposure. The WAS of solvent-exposed workers was lower than that of the national blue-collar reference group, and the difference was significant in the oldest age group (those aged over 60). Solvent-exposed worker's WAS were higher than those of workers diagnosed with CSE. The WAS were lowest among painters and floor-layers, followed by metal workers and printers, and highest among boat builders. The strongest explanatory factors for poor work ability were the number of chronic diseases, age and employment status. Solvent exposure was a weak independent risk factor for reduced WAS, comparable to a level of high alcohol consumption. Even if memory and concentration symptoms were associated with higher solvent exposure, the effect of solvents on self

  13. Biodiesel production from ethanolysis of palm oil using deep eutectic solvent (DES) as co-solvent

    Science.gov (United States)

    Manurung, R.; Winarta, A.; Taslim; Indra, L.

    2017-06-01

    Biodiesel produced from ethanolysis is more renewable and have better properties (higher oxidation stability, lower cloud and pour point) compared to methanolysis, but it has a disadvantage such as complicated purification. To improve ethanolysis process, deep eutectic solvent (DES) can be prepared from choline chloride and glycerol and used as co-solvent in ethanolysis. The deep eutectic solvent is formed from a quaternary ammonium salt (choline chloride) and a hydrogen bond donor (Glycerol), it is a non-toxic, biodegradable solvent compared to a conventional volatile organic solvent such as hexane. The deep eutectic solvent is prepared by mixing choline chloride and glycerol with molar ratio 1:2 at temperature 80 °C, stirring speed 300 rpm for 1 hour. The DES is characterized by its density and viscosity. The ethanolysis is performed at a reaction temperature of 70 °C, ethanol to oil molar ratio of 9:1, potassium hydroxide as catalyst concentration of 1.2 wt. DES as co-solvent with concentration 0.5 to 3 wt. stirring speed 400 rpm, and a reaction time 1 hour. The obtained biodiesel is then characterized by its density, viscosity, and ester content. The oil - ethanol phase condition is observed in the reaction tube. The oil - ethanol phase with DES tends to form meniscus compared to without DES, showed that oil and ethanol become more slightly miscible, which favors the reaction. Using DES as co-solvent in ethanolysis showed increasing in yield and easier purification. The esters properties meet the international standards ASTM D6751, with the highest yield achieved 83,67 with 99,77 conversion at DES concentration 2 . Increasing DES concentration above 2 in ethanolysis decrease the conversion and yield, because of the excessive glycerol in the systems makes the reaction equilibrium moves to the reactant side.

  14. Solvent extraction of Southern US tar sands

    Energy Technology Data Exchange (ETDEWEB)

    Penney, W.R.

    1990-01-01

    The Department of Chemical Engineering at the University of Arkansas, in association with Diversified Petroleum Recovery, Inc. (DPR) of Little Rock, Arkansas, has been developing a solvent extraction process for the recovery of bitumen from tar sands for the past five years. The unique feature of the process is that the bitumen is recovered from the solvent by contacting with a co-solvent, which causes the bitumen to precipitate. The overall purpose of this project is to study both the technical and economic feasibility of applying this technology for recovery of bitumen from tar sands by (1) investigating the socioeconmic factors which affect (a) plant siting and (b) the market value of recovered bitumen; (2) operating a process demonstration unit at the rate of 1 lb/hr recovered bitumen while producing clean sand and recyclable solvents; and (3) determine the economic conditions which will make a bitumen recovery project economical. DPR has analyzed the historical trends of domestic production, consumption, discoveries and reserves of crude oil. They have started an investigation of the volatility in the price of crude oil and of gasoline prices and of the differential between gasoline and crude oil. DPR continues to analyze the geographical movement and demand for asphalt products. Utah does not appear economically attractive as a site for a bitumen from tar sands asphalt plant. Oklahoma sites are now being studied. This report also contains the quarterly progress report from a University of Nevada study to determine bitumen composition, oxygen uptake rates, and viscosities of Alabama and Utah bitumens. Both reports have been indexed separately for inclusion on the data base.

  15. Collaborative Consumption

    DEFF Research Database (Denmark)

    Gjerdrum Pedersen, Esben Rahbek; Netter, Sarah

    2015-01-01

    Purpose – The purpose of this paper is to explore barriers and opportunities for business models based on the ideas of collaborative consumption within the fashion industry. Design/methodology/approach – The analysis is based on a multiple-case study of Scandinavian fashion libraries – a new...... to the new phenomenon of fashion libraries and does not cover other types of collaborative consumption within the fashion industry (Swap-parties, etc.). Originality/value – The paper is one of the first attempts to examine new business models of collaborative consumption in general and the fashion library...... concept in particular. The study contributes to the discussions of whether and how fashion sharing and collaboration holds promise as a viable business model and as a means to promote sustainability....

  16. Collaborative Consumption

    DEFF Research Database (Denmark)

    Gjerdrum Pedersen, Esben Rahbek; Netter, Sarah

    Purpose: The purpose of this paper is to explore barriers and opportunities for business models based on the ideas of collaborative consumption within the fashion industry. Design/methodology/approach: The analysis is based on a multiple-­‐‑case study of Scandinavian fashion libraries – a new...... to the new phenomenon of fashion libraries and does not cover other types of collaborative consumption within the fashion industry (Swap-­‐‑parties, etc.). Originality/value: The paper is one of the first attempts to examine new business models of collaborative consumption in general and the fashion library...... concept in particular. The study contributes to the discussions of whether and how fashion sharing and collaboration holds promise as a viable business model and as a means to promote sustainability....

  17. Positioning consumption

    DEFF Research Database (Denmark)

    Halkier, Bente; Keller, Margit

    2014-01-01

    positionings emerges based on empirical examples of research in parent–children consumption. Positionings are flexible discursive fixations of the relationship between the performances of the practitioner, other practitioners, media discourse and consumption activities. The basic positioning types...... are the practice maintenance and the practice change position, with different sorts of adapting in between. Media discourse can become a resource for a resistant position against social control or for an appropriating position in favour of space for action. Regardless of the current relation to a particular media......This article analyses the ways in which media discourses become a part of contested consumption activities. We apply a positioning perspective with practice theory to focus on how practitioners relate to media discourse as a symbolic resource in their everyday practices. A typology of performance...

  18. Conversion of a deasphalting unit for use in the process of supercritical solvent recovery

    Directory of Open Access Journals (Sweden)

    Waintraub S.

    2000-01-01

    Full Text Available In order to reduce energy consumption and to increase deasphalted oil yield, an old PETROBRAS deasphalting unit was converted for use in the process of supercritical solvent recovery. In-plant and pilot tests were performed to determine the ideal solvent-to-oil ratio. The optimum conditions for separation of the supercritical solvent from the solvent-plus-oil liquid mixture were determined by experimental tests in PVT cells. These tests also allowed measurement of the dew and bubble points, determination of the retrograde region, observation of supercritical fluid compressibility and as a result construction of a phase equilibrium diagram.

  19. Double Solvent for Extracting Rare Earth Concentrate

    International Nuclear Information System (INIS)

    Bintarti, AN; Bambang EHB

    2007-01-01

    An extraction process to rare earth concentrate which contain elements were yttrium (Y), lanthanum (La), cerium (Ce), neodymium (Nd), samarium (Sm), gadolinium (Gd) and dysprosium (Dy) which were dissolved in to nitric acid has been done. The experiment of the extraction by double solvent in batch to mix 10 ml of the feed with 10 ml solvent contained the pair of solvent was TBP and TOA, D2EHPA and TOA, TBP and D2EHPA in cyclohexane as tinner. It was selected a right pairs of solvent for doing variation such as the acidity of the feed from 2 - 6 M and the time of stirring from 5 - 25 minutes gave the good relatively extraction condition to Dy element such as using 10 % volume of TOA in D2EHPA and cyclohexane, the acidity of the feed 3 M and the time stirring 15 minutes produced coefficient distribution to dysprosium = 0.586 and separation factor Dy-Ce = ∼ (unlimited); Dy-Nd = 4.651. (author)

  20. Unsustainable Consumption

    DEFF Research Database (Denmark)

    Thøgersen, John

    2014-01-01

    Our dominant way of living is not sustainable and our activities as private individuals and households directly and indirectly account for a large and increasing share of total environmental impacts. These impacts are related to the structure as well as the level of consumption. In this article, ...

  1. Consumption bomb.

    Science.gov (United States)

    Harrison, P

    1999-01-01

    This article focuses on the issue of consumption in relation to the growing world population. Over the past 25 years, world population increased by 53%, while world consumption per person increased by only 39%. If consumption continues to grow at 1.4%, the world consumption per person will rise by 100% over the next 50 years with the population increasing by only half that amount. The burden of reducing the environmental impact brought about by this increase lies on technology. Technology needs to deliver major changes in improving resource productivity, and decreasing the amount of waste created. Productivity such as global food production has kept up with demand. Malnutrition persists due to poverty, and not because of the inability of the world to produce enough food. However, the prospects are much worse for resources that are not traded on markets or subject to sustainable management such as groundwater, state forests, ocean fish, and communal waste sinks like rivers, lakes, and the global atmosphere. These resources are not under the direct control of people affected by shortage. People who want to change the way these resources are used or managed have to pass through the legal or political system. Usually, political responses are slow and there has to be a very widespread environmental damage before action is taken.

  2. Oxygen consumption remains stable while ammonia excretion is reduced upon short time exposure to high salinity in Macrobrachium acanthurus (Caridae: Palaemonidae, a recent freshwater colonizer

    Directory of Open Access Journals (Sweden)

    Carolina A. Freire

    2017-10-01

    Full Text Available ABSTRACT Palaemonid shrimps occur in the tropical and temperate regions of South America and the Indo-Pacific, in brackish/freshwater habitats, and marine coastal areas. They form a clade that recently (i.e., ~30 mya invaded freshwater, and one included genus, Macrobrachium Bate, 1868, is especially successful in limnic habitats. Adult Macrobrachium acanthurus (Wiegmann, 1836 dwell in coastal freshwaters, have diadromous habit, and need brackish water to develop. Thus, they are widely recognized as euryhaline. Here we test how this species responds to a short-term exposure to increased salinity. We hypothesized that abrupt exposure to high salinity would result in reduced gill ventilation/perfusion and decreased oxygen consumption. Shrimps were subjected to control (0 psu and experimental salinities (10, 20, 30 psu, for four and eight hours (n = 8 in each group. The water in the experimental containers was saturated with oxygen before the beginning of the experiment; aeration was interrupted before placing the shrimp in the experimental container. Dissolved oxygen (DO, ammonia concentration, and pH were measured from the aquaria water, at the start and end of each experiment. After exposure, the shrimp’s hemolymph was sampled for lactate and osmolality assays. Muscle tissue was sampled for hydration content (Muscle Water Content, MWC. Oxygen consumption was not reduced and hemolymph lactate did not increase with increased salinity. The pH of the water decreased with time, under all conditions. Ammonia excretion decreased with increased salinity. Hemolymph osmolality and MWC remained stable at 10 and 20 psu, but osmolality increased (~50% and MWC decreased (~4% at 30 psu. The expected reduction in oxygen consumption was not observed. This shrimp is able to tolerate significant changes in water salt concentrations for a few hours by keeping its metabolism in aerobic mode, and putatively shutting down branchial salt uptake to avoid massive salt

  3. Selective solvent extraction of oils

    Energy Technology Data Exchange (ETDEWEB)

    1938-04-09

    In the selective solvent extraction of naphthenic base oils, the solvent used consists of the extract obtained by treating a paraffinic base oil with a selective solvent. The extract, or partially spent solvent is less selective than the solvent itself. Selective solvents specified for the extraction of the paraffinic base oil are phenol, sulphur dioxide, cresylic acid, nitrobenzene, B:B/sup 1/-dichlorethyl ether, furfural, nitroaniline and benzaldehyde. Oils treated are Coastal lubricating oils, or naphthenic oils from the cracking, or destructive hydrogenation of coal, tar, lignite, peat, shale, bitumen, or petroleum. The extraction may be effected by a batch or counter-current method, and in the presence of (1) liquefied propane, or butane, or naphtha, or (2) agents which modify the solvent power such as, water, ammonia, acetonitrile, glycerine, glycol, caustic soda or potash. Treatment (2) may form a post-treatment effected on the extract phase. In counter-current treatment in a tower some pure selective solvent may be introduced near the raffinate outlet to wash out any extract therefrom.

  4. Selection and design of solvents

    DEFF Research Database (Denmark)

    Gani, Rafiqul

    and design of solvents will be presented together with application examples. The selection problem is defined as finding known chemicals that match the desired functions of a solvent for a specified set of applications. The design problem is defined as finding the molecular structure (or mixture of molecules....... With increasing interest on issues such as waste, sustainability, environmental impact and green chemistry, the selection and design of solvents have become important problems that need to be addressed during chemical product-process design and development. Systematic methods and tools suitable for selection......) that match the desired functions of a solvent for a specified set of applications. Use of organic chemicals and ionic liquids as solvents will be covered....

  5. Tariff design for communication-capable metering systems in conjunction with time-variant electricity consumption rates; Gestaltung von Tarifen fuer kommunikationsfaehige Messsysteme im Verbund mit zeitvariablen Stromtarifen. Eine empirische Analyse von Praeferenzen privater Stromkunden in Deutschland

    Energy Technology Data Exchange (ETDEWEB)

    Gerpott, Torsten J.; Paukert, Mathias [Duisburg-Essen Univ., Duisburg (Germany). Lehrstuhl Unternehmens- und Technologieplanung, Schwerpunkt Telekommunikationswirtschaft

    2013-06-15

    In Germany too, communication-capable electricity metering systems (CMS) together with time-based differentiation of kWh-rates for energy consumption are increasingly proliferated among household customers. Nevertheless, empirical evidence with respect to preferences of members of this customer group for the design of CMS tariff elements and of time-variant electricity consumption rates is still scarce. The present study captures such preferences by means of conjoint analysis of data obtained in an online survey of 754 German-speaking adults. Examined CMS tariff elements are a one-off installation fee and monthly recurring use charges. The studied characteristics of time-based rates are the number of time/tariff blocks, the maximum spread between kWh-rates for different time windows and the adaptability/predictability of kWh-rates. Most respondents judged multidimensional CMS and electricity consumption tariff offerings mainly in light of the CMS tariff characteristics. The vast majority of the participants perceived kWh-rates, which may change with a minimum lead time of one day as reducing the benefit of CMS and consumption tariff bundles. Tariff preferences on the one hand were only rarely significantly related to customers' socio-demographic and electricity procurement characteristics as well as their CMS-related expectations/assessments on the other. The willingness to accept CMS-related one-off installation and recurring service charges as well as the propensity to opt for time-dependent electricity consumption tariff variants differing clearly from non-differentiated electricity price schemes appear to be positively affected by customers' practical application experience with CMS and time-variant electricity consumption rates. Conclusions are drawn for energy suppliers seeking to propagate CMS-based time-variant tariffs among household customers in Germany and for future scholarly research. (orig.)

  6. Transdisciplinary Consumption

    Directory of Open Access Journals (Sweden)

    Sue L.T. McGregor

    2013-06-01

    Full Text Available For the past 100 years, research about consumption has stemmed from two main disciplines: (a consumer studies/consumer sciences (including consumer policy and education (a spin off from home economics and (b consumer behaviour research (a spin off from marketing. This paper focuses on these two disciplines because the results of their respective research are used to shape consumer policy and consumer protection legislation and regulations, marketplace competition policy and regulations, consumer product and service information, media coverage of consumer issues, consumer education curricula and pedagogy, and insights into an evolving consumer culture. This paper asks consumer studies/sciences and consumer behaviour scholars to embrace the transdisciplinary methodology in addition to the traditional empirical, interpretive and critical methodologies. It provides an overview of the four axioms of transdisciplinary methodology with examples to illustrate how consumer-related research would change to address the complex reality of 21st century consumption.

  7. RECOVERY ACT: DYNAMIC ENERGY CONSUMPTION MANAGEMENT OF ROUTING TELECOM AND DATA CENTERS THROUGH REAL-TIME OPTIMAL CONTROL (RTOC): Final Scientific/Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Ron Moon

    2011-06-30

    This final scientific report documents the Industrial Technology Program (ITP) Stage 2 Concept Development effort on Data Center Energy Reduction and Management Through Real-Time Optimal Control (RTOC). Society is becoming increasingly dependent on information technology systems, driving exponential growth in demand for data center processing and an insatiable appetite for energy. David Raths noted, 'A 50,000-square-foot data center uses approximately 4 megawatts of power, or the equivalent of 57 barrels of oil a day1.' The problem has become so severe that in some cases, users are giving up raw performance for a better balance between performance and energy efficiency. Historically, power systems for data centers were crudely sized to meet maximum demand. Since many servers operate at 60%-90% of maximum power while only utilizing an average of 5% to 15% of their capability, there are huge inefficiencies in the consumption and delivery of power in these data centers. The goal of the 'Recovery Act: Decreasing Data Center Energy Use through Network and Infrastructure Control' is to develop a state of the art approach for autonomously and intelligently reducing and managing data center power through real-time optimal control. Advances in microelectronics and software are enabling the opportunity to realize significant data center power savings through the implementation of autonomous power management control algorithms. The first step to realizing these savings was addressed in this study through the successful creation of a flexible and scalable mathematical model (equation) for data center behavior and the formulation of an acceptable low technical risk market introduction strategy leveraging commercial hardware and software familiar to the data center market. Follow-on Stage 3 Concept Development efforts include predictive modeling and simulation of algorithm performance, prototype demonstrations with representative data center equipment to

  8. Collaborative Consumption

    OpenAIRE

    Rahbek Gjerdrum Pedersen, Esben; Netter, Sarah

    2013-01-01

    Purpose: The purpose of this paper is to explore barriers and opportunities for business models based on the ideas of collaborative consumption within the fashion industry. Design/methodology/approach: The analysis is based on a multiple-­‐‑case study of Scandinavian fashion libraries – a new, clothes-­‐‑sharing concept that has emerged as a fashion niche within the last decade. Findings: It is concluded that fashion libraries offers interesting perspectives, e.g. by allow...

  9. Solvent extraction of Zn and metals in Zn ores by nonphosphorous solvents

    International Nuclear Information System (INIS)

    Auchapt, J.M.; Tostain, Jacqueline.

    1975-07-01

    This bibliography follows a first work on Zn solvent extraction by organo-phosphorous compounds. The other solvents used in Zn extraction, are studied: oxygenated nonphosphorous solvents (ketones, alcohols, carboxylic acids, sulfonates), nitrogenous solvents and hydrocarbons [fr

  10. Cesium Concentration in MCU Solvent

    International Nuclear Information System (INIS)

    Walker, D

    2006-01-01

    During Modular Caustic-Side Solvent Extraction (CSSX) Unit (MCU) operations, Cs-137 concentrations in product streams will vary depending on the location in the process and on the recent process conditions. Calculations of cesium concentrations under a variety of operating conditions reveal the following: (1) Under nominal operations with salt solution feed containing 1.1 Ci Cs-137 per gallon, the maximum Cs-137 concentration in the process will occur in the strip effluent (SE) and equal 15-16.5 Ci/gal. (2) Under these conditions, the majority of the solvent will contain 0.005 to 0.01 Ci/gal, with a limited portion of the solvent in the contactor stages containing ∼4 Ci/gal. (3) When operating conditions yield product near 0.1 Ci Cs-137/gal in the decontaminated salt solution (DSS), the SE cesium concentration will be the same or lower than in nominal operations, but majority of the stripped solvent will increase to ∼2-3 Ci/gal. (4) Deviations in strip and waste stream flow rates cause the largest variations in cesium content: (a) If strip flow rates deviate by -30% of nominal, the SE will contain ∼23 Ci/gal, although the cesium content of the solvent will increase to only 0.03 Ci/gal; (b) If strip flow rate deviates by -77% (i.e., 23% of nominal), the SE will contain 54 Ci/gal and solvent will contain 1.65 Ci/gal. At this point, the product DSS will just reach the limit of 0.1 Ci/gal, causing the DSS gamma monitors to alarm; and (c) Moderate (+10 to +30%) deviations in waste flow rate cause approximately proportional increases in the SE and solvent cesium concentrations. Recovery from a process failure due to poor cesium stripping can achieve any low cesium concentration required. Passing the solvent back through the contactors while recycling DSS product will produce a ∼70% reduction during one pass through the contactors (assuming the stripping D value is no worse than 0.36). If the solvent is returned to the solvent hold tank (containing additional

  11. Density Changes in the Optimized CSSX Solvent System

    Energy Technology Data Exchange (ETDEWEB)

    Lee, D.D.

    2002-11-25

    Density increases in caustic-side solvent extraction (CSSX) solvent have been observed in separate experimental programs performed by different groups of researchers. Such changes indicate a change in chemical composition. Increased density adversely affects separation of solvent from denser aqueous solutions present in the CSSX process. Identification and control of factors affecting solvent density are essential for design and operation of the centrifugal contactors. The goals of this research were to identify the factors affecting solvent density (composition) and to develop correlations between easily measured solvent properties (density and viscosity) and the chemical composition of the solvent, which will permit real-time determination and adjustment of the solvent composition. In evaporation experiments, virgin solvent was subjected to evaporation under quiescent conditions at 25, 35, and 45 C with continuously flowing dry air passing over the surface of the solvent. Density and viscosity were measured periodically, and chemical analysis was performed on the solvent samples. Chemical interaction tests were completed to determine if any chemical reaction takes place over extended contact time that changes the composition and/or physical properties. Solvent and simulant, solvent and strip solution, and solvent and wash solution were contacted continuously in agitated flasks. They were periodically sampled and the density measured (viscosity was also measured on some samples) and then submitted to the Chemical Sciences Division of Oak Ridge National Laboratory for analysis by nuclear magnetic resonance (NMR) spectrometry and high-performance liquid chromatography (HPLC) using the virgin solvent as the baseline. Chemical interaction tests showed that solvent densities and viscosities did not change appreciably during contact with simulant, strip, or wash solution. No effects on density and viscosity and no chemical changes in the solvent were noted within

  12. The relationship between hours of sleep, screen time and frequency of food and drink consumption in Spain in the 2011 and 2013 ALADINO: a cross-sectional study

    Directory of Open Access Journals (Sweden)

    Napoleón Pérez-Farinós

    2017-01-01

    Full Text Available Abstract Background The frequency of intake of food and beverages depends on a number of ill-defined behaviour patterns. The objectives of this study were to evaluate the effects of screen time and sleep duration on food consumption frequency, and to describe frequencies and types of food consumption according to BMI category and parents’ level of education. Methods We studied 6287 and 2806 children drawn from the 2011 and 2013 cross-sectional ALADINO studies respectively. Data were collected on number of hours of sleep, screen time, and weekly frequency of consumption of 17 food groups. Weight status was measured, and information was also collected on parents’ educational level. Average food consumption frequencies were calculated by reference to hours of sleep and hours of screen time, and were defined as ≥4 times or <4 times per week (once per week for soft drinks and diet soft drinks. Differences in frequency were evaluated for screen times of more and less than 2 h per day, and for sleep durations longer or shorter than the daily average. We fitted logistic regression models to evaluate the independent association between screen exposure and hours of sleep on the one hand, and food consumption frequency on the other. Results Consumption of fruit and vegetables was lower among children who had parents with no formal or only primary school education. High levels of screen time were associated with a greater frequency of consumption of energy-dense, micronutrient-poor products and a lower frequency of consumption of fruit and vegetables. Sleeping a sufficient number of hours was associated with a higher consumption of fruit and vegetables. The results for 2011 were concordant with those for 2013. Conclusions If efforts to ensure healthier eating habits among children are to be at all successful, they should focus on promoting a sufficient amount of sleep for children, limiting the time they spend watching television and/or playing with

  13. Compressed air-assisted solvent extraction (CASX) for metal removal.

    Science.gov (United States)

    Li, Chi-Wang; Chen, Yi-Ming; Hsiao, Shin-Tien

    2008-03-01

    A novel process, compressed air-assisted solvent extraction (CASX), was developed to generate micro-sized solvent-coated air bubbles (MSAB) for metal extraction. Through pressurization of solvent with compressed air followed by releasing air-oversaturated solvent into metal-containing wastewater, MSAB were generated instantaneously. The enormous surface area of MSAB makes extraction process extremely fast and achieves very high aqueous/solvent weight ratio (A/S ratio). CASX process completely removed Cr(VI) from acidic electroplating wastewater under A/S ratio of 115 and extraction time of less than 10s. When synthetic wastewater containing Cd(II) of 50mgl(-1) was treated, A/S ratios of higher than 714 and 1190 could be achieved using solvent with extractant/diluent weight ratio of 1:1 and 5:1, respectively. Also, MSAB have very different physical properties, such as size and density, compared to the emulsified solvent droplets, making separation and recovery of solvent from treated effluent very easy.

  14. Processing of polymers using reactive solvents

    NARCIS (Netherlands)

    Lemstra, P.J.; Kurja, J.; Meijer, H.E.H.; Meijer, H.E.H.

    1997-01-01

    A review with many refs. on processing of polymers using reactive solvents including classification of synthetic polymers, guidelines for the selection of reactive solvents, basic aspects of processing, examples of intractable and tractable polymer/reactive solvent system

  15. Handbook of organic solvent properties

    CERN Document Server

    Smallwood, Ian

    2012-01-01

    The properties of 72 of the most commonly used solvents are given, tabulated in the most convenient way, making this book a joy for industrial chemists to use as a desk reference. The properties covered are those which answer the basic questions of: Will it do the job? Will it harm the user? Will it pollute the air? Is it easy to handle? Will it pollute the water? Can it be recovered or incinerated? These are all factors that need to be considered at the early stages of choosing a solvent for a new product or process.A collection of the physical properties of most commonly used solvents, their

  16. Acetone-based cellulose solvent.

    Science.gov (United States)

    Kostag, Marc; Liebert, Tim; Heinze, Thomas

    2014-08-01

    Acetone containing tetraalkylammonium chloride is found to be an efficient solvent for cellulose. The addition of an amount of 10 mol% (based on acetone) of well-soluble salt triethyloctylammonium chloride (Et3 OctN Cl) adjusts the solvent's properties (increases the polarity) to promote cellulose dissolution. Cellulose solutions in acetone/Et3 OctN Cl have the lowest viscosity reported for comparable aprotic solutions making it a promising system for shaping processes and homogeneous chemical modification of the biopolymer. Recovery of the polymer and recycling of the solvent components can be easily achieved. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Measuring solvent barrier properties of paper

    International Nuclear Information System (INIS)

    Bollström, Roger; Saarinen, Jarkko J; Toivakka, Martti; Räty, Jukka

    2012-01-01

    New methods for measuring barrier properties against solvents, acids and bases on dispersion coated paper were developed and investigated. Usability, reliability and repeatability were compared both between the new methods and with the standardized method for measuring barrier properties against water vapor. Barrier properties could be measured with all methods and the results obtained by the different methods were in correlation with each other. A qualitative method based on a trace color provided an indicative result, whereas further developed methods also took into account the durability. The effective barrier lifetime could be measured by measuring the conductivity through the substrate as a function of time, or by utilizing a glass prism where the change in refractive index caused by penetrated liquid was monitored, also as a function of time. Barrier properties against water and humidity were also measured and were found not to be predictors for barrier properties against either solvents, or acids or bases, which supports the need to develop new methods

  18. Forecasting of energy and diesel consumption and the cost of energy production in isolated electrical systems in the Amazon using a fuzzification process in time series models

    Energy Technology Data Exchange (ETDEWEB)

    Neto, Joao C. do L, E-mail: jcaldas@ufam.edu.br [Group of Optimization and Fuzzy Systems, Federal University of Amazonas, General Rodrigo Octavio Jordao Ramos Avenue, 3000, Academic Campus, 69077-000 Manaus, Amazonas (Brazil); Costa Junior, Carlos T. da [Postgraduate Program in Electrical Engineering, Institute of Technology, Federal University of Para, Augusto Correa Street, 1, Guama, 66075-900 Belem, Para (Brazil); Bitar, Sandro D.B. [Group of Optimization and Fuzzy Systems, Federal University of Amazonas, General Rodrigo Octavio Jordao Ramos Avenue, 3000, Academic Campus, 69077-000 Manaus, Amazonas (Brazil); Junior, Walter B. [Postgraduate Program in Electrical Engineering, Institute of Technology, Federal University of Para, Augusto Correa Street, 1, Guama, 66075-900 Belem, Para (Brazil)

    2011-09-15

    Understanding the uncertainty inherent in the analysis of diesel fuel consumption and its impact on the generation of electricity is an important topic for planning the expansion of isolated thermoelectric systems in the state of Amazonas. In light of this, a decision support system has been developed to forecast the cost of electricity production using non-stationary data by integrating the methodology of time series models with fuzzy systems and optimization tools. The method presented herein combines the potential of the Autoregressive Integrated Moving Average (ARIMA) and the Seasonal ARIMA (SARIMA) models, such as the forecasting tool, with the advantages of fuzzy set theory to compensate for the uncertainties and errors encountered in the observed data, which would degrade the validity of forecasted values. The results show that incorporation of the {alpha}-cut concept facilitated the evaluation of risks while allowing simultaneous consideration of intervals for the unitary cost of energy production. This provides the analyst with the ability to make decisions using various predicted intervals with different membership values instead of the common practice of simply using the specific costs. - Highlights: > A decision support system has been developed using SARIMA with fuzzy systems and optimizations tools. > It assists the decision-making process for planning the expansion in isolated thermoelectric systems. > The {alpha}-cut concept facilitated the evaluation of risks for the cost of electricity production. > Provides decisions using various forecasted interval for this cost with different membership values.

  19. Forecasting of energy and diesel consumption and the cost of energy production in isolated electrical systems in the Amazon using a fuzzification process in time series models

    International Nuclear Information System (INIS)

    Neto, Joao C. do L; Costa Junior, Carlos T. da; Bitar, Sandro D.B.; Junior, Walter B.

    2011-01-01

    Understanding the uncertainty inherent in the analysis of diesel fuel consumption and its impact on the generation of electricity is an important topic for planning the expansion of isolated thermoelectric systems in the state of Amazonas. In light of this, a decision support system has been developed to forecast the cost of electricity production using non-stationary data by integrating the methodology of time series models with fuzzy systems and optimization tools. The method presented herein combines the potential of the Autoregressive Integrated Moving Average (ARIMA) and the Seasonal ARIMA (SARIMA) models, such as the forecasting tool, with the advantages of fuzzy set theory to compensate for the uncertainties and errors encountered in the observed data, which would degrade the validity of forecasted values. The results show that incorporation of the α-cut concept facilitated the evaluation of risks while allowing simultaneous consideration of intervals for the unitary cost of energy production. This provides the analyst with the ability to make decisions using various predicted intervals with different membership values instead of the common practice of simply using the specific costs. - Highlights: → A decision support system has been developed using SARIMA with fuzzy systems and optimizations tools. → It assists the decision-making process for planning the expansion in isolated thermoelectric systems. → The α-cut concept facilitated the evaluation of risks for the cost of electricity production. → Provides decisions using various forecasted interval for this cost with different membership values.

  20. Flexible Consumption

    DEFF Research Database (Denmark)

    Holm Jacobsen, Peter; Pallesen, Trine

    This report presents the first findings from our qualitative study of consumer behaviour vis-à-vis flexible consumption. The main of objective of this report is to present our first round of data from Bornholm, and to assist the design of products/services designed in WP6. In the report, we adopt...... the perspective of the consumer: what does living in a demand response setup look like to participants – and what kinds of behaviour and interest motivate – and emerge from – their participation in EcoGrid 2.0....

  1. The effects on safety, time consumption and environment of large scale use of roundabouts in an urban area: a case study.

    Science.gov (United States)

    Hydén, C; Várhelyi, A

    2000-01-01

    An experiment with small roundabouts-as speed reducing measures-was carried out in a Swedish city. The purpose of the study was to test the large scale and long term effects of the roundabouts. The results showed that the roundabouts reduced the speed considerably at the junctions and on links between roundabouts. The lateral displacement the roundabout forces the driver to has a great importance for the speed of approaching cars to a roundabout. The speed-reducing effect is large already at a 2 m deflection. A larger deflection does not result in a larger effect. Conflict studies indicated an overall decrease in accident risk by 44%. Vulnerable road-users' risk was reduced significantly, while there was no reduction for car occupants. There is a relation between the reduction of approach speed and the reduction of injury accident risk. The time consumption at a time operated signal was reduced heavily by the instalment of a roundabout at a signalised intersection. On average, emissions (CO and NOx) at roundabouts replacing non-signalised junctions increased by between 4 and 6%, while a roundabout replacing a signalised intersection led to a reduction by between 20 and 29%. The noise level was reduced at junctions that were provided with roundabout. Car drivers were less positive to the roundabouts than bicyclists. In the long term, the unchanged roundabouts worked almost as good as they did shortly after the rebuilding. The study showed that details in the design are of decisive importance for road-users' safety. Special attention has to be paid to the situation of bicyclists. The transition between the cycle path/lane and the junction has to be designed with care-the bicyclists should be integrated with motorised traffic before they enter the roundabout. There should be only one car lane both on the approach, in the circulating area and on the exit. The size of the roundabout shall be as small as possible.

  2. Psychomotor Effects of Mixed Organic Solvents on Rubber Workers

    Directory of Open Access Journals (Sweden)

    O Aminian

    2014-04-01

    Full Text Available Background: Exposure to organic solvents is common among workers. Objective: To assess neurobehavioral effects of long-term exposure to organic solvents among rubber workers in Tehran, Iran. Methods: Across-sectional study was conducted on 223 employees of a rubber industry. The participants completed a data collection sheet on their occupational and medical history, and demographic characteristics including age, work experience, education level; they performed 6 psychiatric tests on the neurobehavioral core test battery (NCTB that measure simple reaction time, short-term memory (digit span, Benton, eye-hand coordination (Purdue pegboard, pursuit aiming, and perceptual speed (digit symbol. Results: Workers exposed and not exposed to organic solvents had similar age and education distribution. The mean work experience of the exposed and non-exposed workers was 5.9 and 4.4 years, respectively. The exposed workers had a lower performance compared to non-exposed workers in all psychomotor tests. After controlling for the confounders by logistic regression analysis, it was found that exposure to organic solvents had a significant effect on the results of digit symbols, digit span, Benton, aiming, and simple reaction time tests. No significant effect was observed in pegboard test. Conclusion: Occupational exposure to organic solvent can induce subtle neurobehavioral changes among workers exposed to organic solvents; therefore, periodical evaluation of the central nervous system by objective psychomotor tests is recommended among those who are chronically exposed to organic solvents.

  3. Ultrasonic aqueous cleaning as a replacement for chlorinated solvent cleaning

    International Nuclear Information System (INIS)

    Thompson, L.M.; Simandl, R.F.

    1992-01-01

    The Oak Ridge Y-12 Plant has been involved in the replacement of chlorinated solvents since 1982. One of the most successful replacement efforts has been the substitution of vapor degreasers or soak tanks using chlorinated solvents with ultrasonic cleaning using aqueous detergents. Recently, funding was obtained from the Department of Energy Office (DOE) of Technology Development to demonstrate this technology. A unit has been procured and installed in the vacuum pump shop area to replace the use of a solvent soak tank. Initially, the solvents used in the shop were CFC-113 and a commercial brand cleaner which contained both perchloroethylene and methylene chloride. While the ultrasonic unit was being procured, a terpene-based solvent was used. Generally, parts were soaked overnight in order to soften baked-on vanish. Many times, wire brushing was used to help remove remaining contamination. Initial testing with the ultrasonic cleaner indicated cleaning times of 20 min were as effective as the overnight solvent soaks in removing contamination. Wire brushing was also not required following the ultrasonic cleaning as was sometimes required with the solvent soak

  4. Consumption governance toward more sustainable consumption

    NARCIS (Netherlands)

    Wahlen, S.; Dubuisson-Quellier, Sophie

    2018-01-01

    This article deliberates on strategies of consumption governance toward more sustainable consumption. We discuss theoretical concepts stemming from various social science perspectives to (1) promote more sustainable consumption, (2) compare strategies stemming from individualist understanding of

  5. Studies on catalytic hydrotreating of recycled solvents from coal liquefaction process. Part 1. Characteristics changes of recycled solvents during hydrotreating

    Energy Technology Data Exchange (ETDEWEB)

    Morimura, Y.; Nakata, S.; Yokota, Y.; Shirota, Y.; Nakamura, M. [Chiyoda Corp., Tokyo (Japan); Mitarai, Y. [Sumitomo Metal Mining Co. Ltd., Tokyo (Japan); Inoue, Y. [Nippon Ketjen Co. Ltd., Tokyo (Japan)

    1995-07-01

    A bituminous coal liquefaction process, called the NEDOL process, is under development by the New Energy and Industrial Technology Development Organization (NEDO). Important features of this process include the capacity to produce hydrogen-donatable solvents, obtained by hydrogenation of middle distillates of coal derived oils, and to recycle these solvents to a liquefaction stage as hydrogen donor solvents. These recycled solvents, obtained by liquefaction of Wandoan coal, and their catalytic hydrotreated oils, have been extensively characterized, using a variety of analytical methods. The following items have been examined and are discussed in this study: (1) Influence of chemical hydrogen consumption on the reactivities of hydrodesulfurization (HDS), hydrodenitrogenation (HDN), hydrodeoxygenation (HDO) and hydrogenation of aromatic-rings, during hydrotreating; (2) Changes in composition of hydrocarbon types, nitrogen- and oxygen-containing compounds, as a function of chemical hydrogen consumption; (3) Changes of average molecular weights; (4) Characteristics changes of oxygen- and nitrogen-containing compounds, and reactivities of HDO and HDN; (5) Characteristics changes of donatable hydrogen as a function of a degree of hydrogenation ({delta}fa). 14 refs., 14 figs., 3 tabs.

  6. Uranium refining by solvent extraction

    International Nuclear Information System (INIS)

    Kraikaew, J.

    1996-01-01

    The yellow cake refining was studied in both laboratory and semi-pilot scales. The process units mainly consist of dissolution and filtration, solvent extraction, and precipitation and filtration. Effect of flow ratio (organic flow rate/ aqueous flow rate) on working efficiencies of solvent extraction process was studied. Detailed studies were carried out on extraction, scrubbing and stripping processes. Purity of yellow cake product obtained is high as 90.32% U 3 O 8

  7. Dynamics of solvent-free grafted nanoparticles

    KAUST Repository

    Chremos, Alexandros

    2012-01-01

    The diffusivity and structural relaxation characteristics of oligomer-grafted nanoparticles have been investigated with simulations of a previously proposed coarse-grained model at atmospheric pressure. Solvent-free, polymer-grafted nanoparticles as well as grafted nanoparticles in a melt were compared to a reference system of bare (ungrafted) particles in a melt. Whereas longer chains lead to a larger hydrodynamic radius and lower relative diffusivity for grafted particles in a melt, bulk solvent-free nanoparticles with longer chains have higher relative diffusivities than their short chain counterparts. Solvent-free nanoparticles with short chains undergo a glass transition as indicated by a vanishing diffusivity, diverging structural relaxation time and the formation of body-centered-cubic-like order. Nanoparticles with longer chains exhibit a more gradual increase in the structural relaxation time with decreasing temperature and concomitantly increasing particle volume fraction. The diffusivity of the long chain nanoparticles exhibits a minimum at an intermediate temperature and volume fraction where the polymer brushes of neighboring particles overlap, but must stretch to fill the interparticle space. © 2012 American Institute of Physics.

  8. Sustainable consumption

    DEFF Research Database (Denmark)

    Prothero, Andrea; Dobscha, Susan; Freund, Jim

    2011-01-01

    This essay explores sustainable consumption and considers possible roles for marketing and consumer researchers and public policy makers in addressing the many sustainability challenges that pervade our planet. Future research approaches to this interdisciplinary topic need to be comprehensive...... and systematic and will benefit from a variety of different perspectives. There are a number of opportunities for future research, and three areas are explored in detail. First, the essay considers the inconsistency between the attitudes and behaviors of consumers with respect to sustainability; next, the agenda...... is broadened to explore the role of individual citizens in society; and finally, a macro institutional approach to fostering sustainability is explored. Each of these areas is examined in detail and possible research avenues and public policy initiatives are considered within each of these separate...

  9. Solvent/Non-Solvent Sintering To Make Microsphere Scaffolds

    Science.gov (United States)

    Laurencin, Cato T.; Brown, Justin L.; Nair, Lakshmi

    2011-01-01

    A solvent/non-solvent sintering technique has been devised for joining polymeric microspheres to make porous matrices for use as drug-delivery devices or scaffolds that could be seeded with cells for growing tissues. Unlike traditional sintering at elevated temperature and pressure, this technique is practiced at room temperature and pressure and, therefore, does not cause thermal degradation of any drug, protein, or other biochemical with which the microspheres might be loaded to impart properties desired in a specific application. Also, properties of scaffolds made by this technique are more reproducible than are properties of comparable scaffolds made by traditional sintering. The technique involves the use of two miscible organic liquids: one that is and one that is not a solvent for the affected polymer. The polymeric microspheres are placed in a mold having the size and shape of the desired scaffold, then the solvent/non-solvent mixture is poured into the mold to fill the void volume between the microspheres, then the liquid mixture is allowed to evaporate. Some of the properties of the resulting scaffold can be tailored through choice of the proportions of the liquids and the diameter of the microspheres.

  10. Sorption behaviour of polystyrene grafted sago starch in various solvents

    International Nuclear Information System (INIS)

    Janarthanan, P.; Yunus, W.M.Z.W.; Ahmed, M.B.; Rahman, M.Z.; Haron, M.J.; Silong, S.

    2001-01-01

    This paper describes swelling properties of polystyrene grafted sago starch in dimethyl sulfoxide (DMSO); chloroform (CHCl/sub 3/), water, acetone carbon tetrachloride (CCl/sub 4/) cyclohexanone and toluene. The copolymer for this study was prepared by grafting styrene onto sago starch using ceric ammonium nitrate as a redox initiator. Solvent uptake of the copolymer with respect to time was obtained by soaking the samples in chosen solvents for various time intervals at 25+-1 degree centigrade. The results obtained from swelling of polystyrene grafted sago starch in polar and non polar solvents showed that the percentage of swelling at equilibrium and the swelling rate coefficient decreased in the following order: DMSO > water > acetone cyclohexanone approx. CHCl/sub 3/ > toluene approx. CCl/sub 4/. Dimethyl sulfoxide showed the highest percentage of swelling at equilibrium that is 765%. Diffusions of the solvents onto the polymers were found to be of a Fickian only for DMSO. (author)

  11. Monitoring irrigation water consumption using high resolution NDVI image time series (Sentinel-2 like). Calibration and validation in the Kairouan plain (Tunisia)

    Science.gov (United States)

    Saadi, Sameh; Simonneaux, Vincent; Boulet, Gilles; Mougenot, Bernard; Zribi, Mehrez; Lili Chabaane, Zohra

    2015-04-01

    Water scarcity is one of the main factors limiting agricultural development in semi-arid areas. It is thus of major importance to design tools allowing a better management of this resource. Remote sensing has long been used for computing evapotranspiration estimates, which is an input for crop water balance monitoring. Up to now, only medium and low resolution data (e.g. MODIS) are available on regular basis to monitor cultivated areas. However, the increasing availability of high resolution high repetitivity VIS-NIR remote sensing, like the forthcoming Sentinel-2 mission to be lunched in 2015, offers unprecedented opportunity to improve this monitoring. In this study, regional crops water consumption was estimated with the SAMIR software (Satellite of Monitoring Irrigation) using the FAO-56 dual crop coefficient water balance model fed with high resolution NDVI image time series providing estimates of both the actual basal crop coefficient (Kcb) and the vegetation fraction cover. The model includes a soil water model, requiring the knowledge of soil water holding capacity, maximum rooting depth, and water inputs. As irrigations are usually not known on large areas, they are simulated based on rules reproducing the farmer practices. The main objective of this work is to assess the operationality and accuracy of SAMIR at plot and perimeter scales, when several land use types (winter cereals, summer vegetables…), irrigation and agricultural practices are intertwined in a given landscape, including complex canopies such as sparse orchards. Meteorological ground stations were used to compute the reference evapotranspiration and get the rainfall depths. Two time series of ten and fourteen high-resolution SPOT5 have been acquired for the 2008-2009 and 2012-2013 hydrological years over an irrigated area in central Tunisia. They span the various successive crop seasons. The images were radiometrically corrected, first, using the SMAC6s Algorithm, second, using invariant

  12. Comparison of cost determination of both resource consumption accounting and time-driven activity-based costing systems in a healthcare setting.

    Science.gov (United States)

    Özyapıcı, Hasan; Tanış, Veyis Naci

    2017-05-01

    Objective The aim of the present study was to explore the differences between resource consumption accounting (RCA) and time-driven activity-based costing (TDABC) systems in determining the costs of services of a healthcare setting. Methods A case study was conducted to calculate the unit costs of open and laparoscopic gall bladder surgeries using TDABC and RCA. Results The RCA system assigns a higher cost both to open and laparoscopic gall bladder surgeries than TDABC. The total cost of unused capacity under the TDABC system is also double that in RCA. Conclusion Unlike TDABC, RCA calculates lower costs for unused capacities but higher costs for products or services in a healthcare setting in which fixed costs make up a high proportion of total costs. What is known about the topic? TDABC is a revision of the activity-based costing (ABC) system. RCA is also a new costing system that includes both the theoretical advantages of ABC and the practical advantages of German costing. However, little is known about the differences arising from application of TDABC and RCA. What does this paper add? There is no study comparing both TDABC and RCA in a single case study based on a real-world healthcare setting. Thus, the present study fills this gap in the literature and it is unique in the sense that it is the first case study comparing TDABC and RCA for open and laparoscopic gall bladder surgeries in a healthcare setting. What are the implications for practitioners? This study provides several interesting results for managers and cost accounting researchers. Thus, it will contribute to the spread of RCA studies in healthcare settings. It will also help the implementers of TDABC to revise data concerning the cost of unused capacity. In addition, by separating costs into fixed and variable, the paper will help managers to create a blended (combined) system that can improve both short- and long-term decisions.

  13. Photophysical properties of coumarin-120: Unusual behavior in nonpolar solvents

    International Nuclear Information System (INIS)

    Pal, Haridas; Nad, Sanjukta; Kumbhakar, Manoj

    2003-01-01

    Photophysical properties of coumarin-120 (C120; 7-amino-4-methyl-1,2-benzopyrone) dye have been investigated in different solvents using steady-state and time-resolved fluorescence and picosecond laser flash photolysis (LFP) and nanosecond pulse radiolysis (PR) techniques. C120 shows unusual photophysical properties in nonpolar solvents compared to those in other solvents of moderate to higher polarities. Where the Stokes shifts (Δν-bar=ν-bar abs -ν-bar fl ), fluorescence quantum yields (Φ f ), and fluorescence lifetimes (τ f ) show more or less linear correlation with the solvent polarity function Δf={(ε-1)/(2ε+1)-(n 2 -1)/(2n 2 +1)}, all these parameters are unusually lower in nonpolar solvents. Unlike in other solvents, both Φ f and τ f in nonpolar solvents are also strongly temperature dependent. It is indicated that the excited singlet (S 1 ) state of C120 undergoes a fast activation-controlled nonradiative deexcitation in nonpolar solvents, which is absent in all other solvents. LFP and PR studies indicate that the intersystem crossing process is negligible for the present dye in all the solvents studied. Photophysical behavior of C120 in nonpolar solvent has been rationalized assuming that in these solvents the dye exists in a nonpolar structure, with its 7-NH 2 group in a pyramidal configuration. In this structure, since the 7-NH 2 group is bonded to the 1,2-benzopyrone moiety by a single bond, the former group can undergo a fast flip-flop motion, which in effect causes the fast nonradiative deexcitation of the dye excited state. In moderate to higher polarity solvents, it is indicated that the dye exists in an intramolecular charge-transfer structure, where the bond between 7-NH 2 group and the 1,2-benzopyrone moiety attains substantial double bond character. In this structure, the flip-flop motion of the 7-NH 2 group is highly restricted and thus there is no fast nonradiative deexcitation process for the excited dye

  14. Biomass catalysis and solvents; Biomasse catalyse et solvants

    Energy Technology Data Exchange (ETDEWEB)

    Pioch, D [CIRAD-AMIS, programme Agro-Alimentaire, 34 - Montpellier (France); Pouilloux, Y; Barrault, J [Centre National de la Recherche Scientifique (CNRS UMR 6503), ESIP, Lab. de Catalyse en Chimie Organique, 86 - Poitiers (France); and others

    2000-07-01

    How to develop new technics and products and at the same time to respect the environment? The biomass seems to be an interesting domain in this framework and this document allows the selection of performing products obtain by biomass. Among these products the solvents economic and environmental advantages or consequences are discussed. A great part is also devoted to the voc emissions, bound to the solvents.

  15. Effect of pH on desorption of CO2 from alkanolamine - rich solvents

    Science.gov (United States)

    Du, Min

    2017-08-01

    Adipic acid was used as a pH regulator, which was added to 0.4 mol/L MEA, DEA and MDEA solvents during CO2 desorption process. It is found that when pH value of the solvents swing between 8-10, CO2 desorption rate enhanced, and energy consumption has declined obviously. This research may have reference significance on optimization of alkanolamine CO2 capture process.

  16. Frontiers in sustainable consumption research

    DEFF Research Database (Denmark)

    Reisch, Lucia A.; Cohen, Maurie J.; Thøgersen, John

    2016-01-01

    While the field of sustainable consumption research is relatively young, it has already attracted scholars from all corners of the social sciences. The time has come to identify a new research agenda as trends in sustainable consumption research seem to suggest the dawning of a new phase. Not only...

  17. Second-home electricity consumption

    DEFF Research Database (Denmark)

    Møller Andersen, Frits; Christensen, M.S.; Jensen, O.M.

    2008-01-01

    in electricity consumption. Luxury tourism use and senior citizens' that use a few per cent of the second homes as their home contribute to a minor degree to the overall increase of electricity consumption. Scenarios show that this development may accelerate with increased leisure time, increased use and more...

  18. Effect of solvent concentration on performance of polysulfone membrane for filtration and separation

    Science.gov (United States)

    Syafiq Mohamad Sofian, Muhamad; Zaini Yunos, Muhamad; Ahmad, Azlinnorazia; Harun, Zawati; Akhair, Siti Hajar Mohd; Adibah Raja Ahmad, Raja; Hafeez Azhar, Faiz; Rashid, Abdul Qaiyyum Abd; Ismail, Al Emran

    2017-08-01

    This study was conducted to investigate the effect of solvent concentration on the performance of polysulfone membrane via airbrush spray method. The solvent concentration was varied from 73% to 80% in dope solution. The study also investigated airbrush processing parameter such as spray time and distance at different solvent concentration. The prepared membrane was characterized in respect to its morphology and the performance of the membrane were evaluated via gas permeability performance. This study found that the membrane fiber size was reduced as solvent concentration increases. When time increased the diameter of fiber also increased. The distance also affected the fiber size, when the distance increased the diameter of fiber became smaller. 80% of solvent concentration has better filtration and separation ability compared to other solvent due to its porosity and morphology. From the gas permeability cell testing it shows that the permeability is increasing as the solvent concentration decrease.

  19. Nitrous Oxide and Nitrous Oxide-Free Low-Flow Anesthesia Using Bispectral Index Monitoring: Effects on Hemodynamics, Recovery Times, Volatile Anesthetic Consumption and Costs

    Directory of Open Access Journals (Sweden)

    Bengü Gülhan Köksal

    2010-12-01

    Full Text Available Aim: In this study, we aimed to compare the effects of desfluraneN2O and desflurane-fentanyl combinations on hemodynamics, recovery times, volatile anesthetic consumption and costs in low-flow desflurane anesthesia by bispectral index (BIS monitoring of depth of anesthesia. Methods: After approval of ethics committee and obtaining patient consents, 60 patients were divided into two equal groups randomly. Non-invasive blood pressure measurement, ECG, SpO2 and BIS were monitored. All patients received 10 L .min-1 100% oxygen with mask for 5 minute before intubation. 2 mg.kg-1 propofol, 2 μg.kg-1 fentanyl and 0.6 mg.kg-1 rocuronium bromide were administered at induction in both groups. Desfluran 6% was chosen for anesthesia maintenance. Group 1 received 50% O2-N2O mixture in 6 L.min-1 and Group 2 received 50% O2-air mixture in 6 L.min-1 as carrier gas. Low-flow anesthesia (1 L.min-1 was started after a 10-min period of initial high flow (6 L.min-1. In Group 2, infusion of fentanyl was begun in 1 μg.kg.hour-1 rate. Desflurane level was adjusted at a main BIS value of 40-60. Blood pressure, heart rate, FiO2, etO2, FiN22, EtN2O, FiCO2, EtCO2, Fidesfluran and Etdesflurane were recorded. Results: There were no significant differences between the two groups in terms of heart rate, arterial blood pressure, settings of desfluran and recovery time. BIS values (p<0.001 and anesthetic agent costs (p<0.001 were higher in Group 2. Conclusion: Using fentanyl infusion instead of nitrous oxide in low flow-anesthesia with desflurane did not alter the hemodynamic parameters. Fentanyl infusion with medical air-oxygen as carrier gas is an alternative technique, but increases BIS values and anesthetic agent costs. (The Medical Bulletin of Haseki 2010; 48: 132-8

  20. Solvents interactions with thermochromic print

    Directory of Open Access Journals (Sweden)

    Mirela Rožić

    2017-12-01

    Full Text Available In this study, the interactions between different solvents (benzene, acetone, cyclohexanone, various alcohols and water and thermochromic printing ink were investigated. Thermochromic printing ink was printed on metal surface. Components of thermochromic printing inks are polymeric microcapsules and classic yellow offset printing ink. Below its activation temperature, dye and developer within the microcapsules form a blue coloured complex. Therefore, thermochromic print is green. By heating above the activation temperature, blue colour of the complex turns into the leuco dye colourless state and the green colour of the prints turns into the yellow colour of the classic offset pigment. The results of the interaction with various solvents show that the thermochromic print is stable in all tested solvents except in ethanol, acetone and cyclohexanone. In ethanol, the green colour of the print becomes yellow. SEM analysis shows that microcapsules are dissolved. In acetone and cyclohexanone, the green colour of the print turns into blue, and the microcapsules become significantly more visible. Thus, the yellow pigment interacts with examined ketones. Based on the obtained interactions it can be concluded that the microcapsules have more polar nature than the classical pigment particles. Solvent-thermocromic print interactions were analysed using Hansen solubility parameters that rank the solvents based on their estimated interaction capabilities.

  1. Removing oxygen from a solvent extractant in an uranium recovery process

    International Nuclear Information System (INIS)

    Hurst, F.J.; Brown, G.M.; Posey, F.A.

    1984-01-01

    An improvement in effecting uranium recovery from phosphoric acid solutions is provided by sparging dissolved oxygen contained in solutions and solvents used in a reductive stripping stage with an effective volume of a nonoxidizing gas before the introduction of the solutions and solvents into the stage. Effective volumes of nonoxidizing gases, selected from the group consisting of argon, carbon dioxide, carbon monoxide, helium, hydrogen, nitrogen, sulfur dioxide, and mixtures thereof, displace oxygen from the solutions and solvents thereby reduce deleterious effects of oxygen such as excessive consumption of elemental or ferrous and accumulation of complex iron phosphates or cruds

  2. Second-home electricity consumption

    Energy Technology Data Exchange (ETDEWEB)

    Andersen, Frits M.; Morthorst, Poul Erik [Risoe, Systems Analysis Department, Technical University of Denmark, P.O. Box 49, DK-4000 Roskilde (Denmark); Christensen, Morten S.; Kofoed, Niels-Ulrik [Esbensen Consulting Engineers, Carl Jacobsens Vej 25D, DK-2500 Valby (Denmark); Jensen, Ole Michael [Danish Building Research Institute, Department of Energy and Environment, University of Aalborg, P.O. Box 119, DK-2970 Horsholm (Denmark)

    2008-01-15

    In Denmark, electricity consumption in first and second homes has developed quite differently. Since 1990, electricity consumption in ordinary residences has grown moderately, while consumption in weekend and second homes has increased considerably. In turn, this development has been blamed on a growing number of luxury cottages, new legislation permitting senior citizens to have their permanent address in their second home and a growing number of electric appliances. In order to examine the growing electricity consumption in second homes and to estimate future demand, a multidisciplinary study combining top-down and bottom-up analyses was conducted, i.e., combining models using aggregated economic parameters and feasibility studies using technical parameters, respectively. The top-down estimation showed that changes in electricity consumption in second homes correlate to changes in income. The bottom-up estimation showed that consumption was mainly affected by the frequency with which second homes were used in the winter time. This indicates that additional second homes, increased full-time use and intensified use of electric appliances are the main reasons for the observed increases in electricity consumption. Luxury tourism use and senior citizens' that use a few per cent of the second homes as their home contribute to a minor degree to the overall increase of electricity consumption. Scenarios show that this development may accelerate with increased leisure time, increased use and more permanent settlement in second homes. (author)

  3. Second-home electricity consumption

    International Nuclear Information System (INIS)

    Andersen, Frits M.; Christensen, Morten S.; Jensen, Ole Michael; Kofoed, Niels-Ulrik; Morthorst, Poul Erik

    2008-01-01

    In Denmark, electricity consumption in first and second homes has developed quite differently. Since 1990, electricity consumption in ordinary residences has grown moderately, while consumption in weekend and second homes has increased considerably. In turn, this development has been blamed on a growing number of luxury cottages, new legislation permitting senior citizens to have their permanent address in their second home and a growing number of electric appliances. In order to examine the growing electricity consumption in second homes and to estimate future demand, a multidisciplinary study combining top-down and bottom-up analyses was conducted, i.e., combining models using aggregated economic parameters and feasibility studies using technical parameters, respectively. The top-down estimation showed that changes in electricity consumption in second homes correlate to changes in income. The bottom-up estimation showed that consumption was mainly affected by the frequency with which second homes were used in the winter time. This indicates that additional second homes, increased full-time use and intensified use of electric appliances are the main reasons for the observed increases in electricity consumption. Luxury tourism use and senior citizens' that use a few per cent of the second homes as their home contribute to a minor degree to the overall increase of electricity consumption. Scenarios show that this development may accelerate with increased leisure time, increased use and more permanent settlement in second homes

  4. Multiple sclerosis and organic solvents

    DEFF Research Database (Denmark)

    Mortensen, J T; Brønnum-Hansen, Henrik; Rasmussen, K

    1998-01-01

    We investigated a possible causal relation between exposure to organic solvents in Danish workers (housepainters, typographers/printers, carpenters/cabinetmakers) and onset of multiple sclerosis. Data on men included in the Danish Multiple Sclerosis Register (3,241 men) were linked with data from......, and butchers. Over a follow-up period of 20 years, we observed no increase in the incidence of multiple sclerosis among men presumed to be exposed to organic solvents. It was not possible to obtain data on potential confounders, and the study design has some potential for selection bias. Nevertheless......, the study does not support existing hypotheses regarding an association between occupational exposure to organic solvents and multiple sclerosis....

  5. Indium recovery by solvent extraction

    International Nuclear Information System (INIS)

    Fortes, Marilia Camargos Botelho

    1999-04-01

    Indium has been recovered as a byproduct from residues generated from the sulfuric acid leaching circuits in mineral plants for zinc recovery. Once its recovery comes from the slags of other metals recovery, it is necessary to separate it from the other elements which usually are present in high concentrations. Many works have been approaching this separation and indicate the solvent extraction process as the main technique used. In Brazilian case, indium recovery depends on the knowledge of this technique and its development. This paper describes the solvent extraction knowledge for the indium recovery from aqueous solutions generated in mineral plants. The results for determination of the best experimental conditions to obtain a high indium concentration solution and minimum iron poisoning by solvent extraction with di (2-ethylhexyl)-phosphoric acid (D2EHPA) solubilized in isoparafin and exxsol has been presented. (author)

  6. High temperature solvent extraction of oil shale and bituminous coal using binary solvent mixtures

    Energy Technology Data Exchange (ETDEWEB)

    Goetz, G.K.E. [Lehrstuhl fuer Geologie, Geochemie und Lagerstaetten des Erdoels und der Kohle, RWTH Aachen (Germany)

    1997-12-31

    A high volatile bituminous coal from the Saar Basin and an oil shale from the Messel deposit, both Germany, were extracted with binary solvent mixtures using the Advanced Solvent Extraction method (ASE). Extraction temperature and pressure were kept at 100 C, respectively 150 C, and 20,7 MPa. After the heating phase (5 min) static extractions were performed with mixtures (v:v, 1:3) of methanol with toluene, respectively trichloromethane, for further 5 min. Extract yields were the same or on a higher level compared to those from classical soxhlet extractions (3 days) using the same solvents at 60 C. Comparing the results from ASE with those from supercritical fluid extraction (SFE) the extract yields were similar. Increasing the temperature in ASE releases more soluble organic matter from geological samples, because compounds with higher molecular weight and especially more polar substances were solubilized. But also an enhanced extraction efficiency resulted for aliphatic and aromatic hydrocarbons which are used as biomarkers in Organic Geochemistry. Application of thermochemolysis with tetraethylammonium hydroxide (TEAH) using pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS) on the extraction residues shows clearly that at higher extraction temperatures minor amounts of free fatty acids or their methyl esters (original or produced by ASE) were trapped inside the pore systems of the oil shale or the bituminous coal. ASE offers a rapid and very efficient extraction method for geological samples reducing analysis time and costs for solvents. (orig.)

  7. Viscous fingering effects in solvent displacement of heavy oil

    Energy Technology Data Exchange (ETDEWEB)

    Cuthiell, D. [Suncor Energy, Fort McMurray, AB (Canada); Kissel, G.; Jackson, C.; Frauenfeld, T.W.J.; Fisher, D. [Alberta Research Council, Devon, AB (Canada); Rispler, K. [Saskatchewan Research Council, Saskatoon, SK (Canada)

    2004-07-01

    Vapour Extraction (VAPEX) is a solvent-based process that is analogous to steam-assisted gravity drainage (SAGD) for the recovery of heavy oil. A cyclic solvent process is preferred for thin reservoirs, particularly primary-depleted reservoirs. In a cyclic steam stimulation process, a solvent is injected into the reservoir for a period of time before oil is produced from the well. Viscous fingering is a phenomena that characterizes several solvent-based processes for the recovery of heavy oil. A combined experimental and simulation study was conducted to characterize viscous fingering under heavy oil recovery conditions (high ratio of oil to solvent viscosity). Four experiments were conducted in heavy oil-saturated sand packs. Three involved injection of a miscible, liquid solvent at the bottom of the sand pack. The heavy oil in these experiments was displaced upwardly. The fourth experiment involved top-down injection of a gaseous solvent. The miscible liquid displacement was dominated by one solvent finger which broke through to a producing well at the other end of the sand pack. Breakthrough times were similar to that at lower viscosity. The fourth experiment showed fingering along with features of a gravity-driven VAPEX process. Key features of the experiment and realistic fingering patterns were numerically simulated using a commercial reservoir simulator. It was emphasized that accurate modelling of dispersion is necessary in matching the observed phenomena. The simulations should include the capillary effects because of their significance for gaseous fingering and the VAPEX processes. 17 refs., 2 tabs., 20 figs.

  8. Photophysics of Curcumin excited state in toluene-polar solvent mixtures: Role of H-bonding properties of the polar solvent

    Energy Technology Data Exchange (ETDEWEB)

    Saini, R.K.; Das, K., E-mail: kaustuv@rrcat.gov.in

    2014-01-15

    Excited state dynamics of Curcumin in binary solvent mixtures of toluene and polar H-bonding solvents were compared by using an instrument endowed with 40 ps time resolution. The solvation time constant of Curcumin increases significantly (and can therefore be measured) in polar solvents which have, either, both H-bond donating and accepting ability, or, only H-bond donating ability. These results suggest that the rate limiting step in the excited state dynamics of the pigment might be the formation and reorganization of the intermolecular H-bonding between the keto group of the pigment and the H-bond donating moieties of the polar solvent. -- Highlights: • Excited state dynamics of Curcumin in a binary solvent mixture of toluene and three polar H-bonding solvents were compared. • The solvation time constant increases significantly with polar solvents having, H-bond donating and accepting, or, H-bond donating ability. • Observed results suggest that H-bonding property of polar solvent plays an important role in the excited state dynamics. • Intermolecular H-bonding between the keto group of the pigment and polar solvent may be the rate limiting step.

  9. Photophysics of Curcumin excited state in toluene-polar solvent mixtures: Role of H-bonding properties of the polar solvent

    International Nuclear Information System (INIS)

    Saini, R.K.; Das, K.

    2014-01-01

    Excited state dynamics of Curcumin in binary solvent mixtures of toluene and polar H-bonding solvents were compared by using an instrument endowed with 40 ps time resolution. The solvation time constant of Curcumin increases significantly (and can therefore be measured) in polar solvents which have, either, both H-bond donating and accepting ability, or, only H-bond donating ability. These results suggest that the rate limiting step in the excited state dynamics of the pigment might be the formation and reorganization of the intermolecular H-bonding between the keto group of the pigment and the H-bond donating moieties of the polar solvent. -- Highlights: • Excited state dynamics of Curcumin in a binary solvent mixture of toluene and three polar H-bonding solvents were compared. • The solvation time constant increases significantly with polar solvents having, H-bond donating and accepting, or, H-bond donating ability. • Observed results suggest that H-bonding property of polar solvent plays an important role in the excited state dynamics. • Intermolecular H-bonding between the keto group of the pigment and polar solvent may be the rate limiting step

  10. Turkey's net energy consumption

    International Nuclear Information System (INIS)

    Soezen, Adnan; Arcaklioglu, Erol; Oezkaymak, Mehmet

    2005-01-01

    The main goal of this study is to develop the equations for forecasting net energy consumption (NEC) using an artificial neural-network (ANN) technique in order to determine the future level of energy consumption in Turkey. In this study, two different models were used in order to train the neural network. In one of them, population, gross generation, installed capacity and years are used in the input layer of the network (Model 1). Other energy sources are used in input layer of network (Model 2). The net energy consumption is in the output layer for two models. Data from 1975 to 2003 are used for the training. Three years (1981, 1994 and 2003) are used only as test data to confirm this method. The statistical coefficients of multiple determinations (R 2 -value) for training data are equal to 0.99944 and 0.99913 for Models 1 and 2, respectively. Similarly, R 2 values for testing data are equal to 0.997386 and 0.999558 for Models 1 and 2, respectively. According to the results, the net energy consumption using the ANN technique has been predicted with acceptable accuracy. Apart from reducing the whole time required, with the ANN approach, it is possible to find solutions that make energy applications more viable and thus more attractive to potential users. It is also expected that this study will be helpful in developing highly applicable energy policies

  11. Improved Purex solvent scrubbing methods

    International Nuclear Information System (INIS)

    Mailen, J.C.; Tallent, O.K.

    1984-01-01

    Studies of hydrazine and hydroxylamine salts as solvent scrubbing agents that can be decomposed into gases are summarized. Results from testing of countercurrent scrubbers and solid sorber columns that produce lesser amounts of permanent salts are reported. The status of studies of the acid-degradation of paraffin diluent and the options for removal of long-chain organic acids is given

  12. Risk assessment for halogenated solvents

    International Nuclear Information System (INIS)

    Travis, C.C.

    1988-01-01

    A recent development in the cancer risk area is the advent of biologically based pharmacokinetic and pharmacodynamic models. These models allow for the incorporation of biological and mechanistic data into the risk assessment process. These advances will not only improve the risk assessment process for halogenated solvents but will stimulate and guide basic research in the biological area

  13. Solvent extraction of radionuclides from aqueous tank waste

    International Nuclear Information System (INIS)

    Moyer, B.A.; Bonnesen, P.V.; Sachleben, R.A.

    1997-01-01

    This task aims toward the development of efficient solvent-extraction processes for the removal of the fission products 99 Tc, 90 Sr, and 137 Cs from alkaline tank wastes. Processes already developed or proposed entail direct treatment of the waste solution with the solvent and subsequent stripping of the extracted contaminants from the solvent into a dilute aqueous solution. Working processes to remove Tc(and SR) separately and Cs separately have been developed; the feasibility of a combined process is under investigation. Since Tc, Sr, and Cs will be vitrified together in the high-level fraction, however, a process that could separate Tc, Sr, and Cs simultaneously, as opposed to sequentially, potentially offers the greatest impact. A figure presents a simplified diagram of a proposed solvent-extraction cycle followed by three possible treatments for the stripping solution. Some degree of recycle of the stripping solution (option a) is expected. Simple evaporation (option c) is possible prior to vitrification; this offers the greatest possible volume reduction with simple operation and no consumption of chemicals, but it is energy intensive. However, if the contaminants are concentrated (option b) by fixed-bed technology, the energy penalty of evaporation can be avoided and vitrification facilitated without any additional secondary waste being produced

  14. Recovery of plutonium from solvent wash solutions

    International Nuclear Information System (INIS)

    Kyser, E.A.

    1992-01-01

    A number of potential alternatives to the acid hydrolysis recovery of Pu were investigated. The most promising alternative for short-term use appears to be an anion exchange process that would eliminate the long boiling times and the multiple-pass concentration steps needed with the solvent extraction process because it separates the Pu from the dibutyl phosphate (DBP) while at the same time concentrating the Pu. However, restart of the Primary Recovery Column (PRC) to process this solution would require significant administrative effort. The original boiling recovery by acid hydrolysis followed by solvent extraction is probably the most expedient way to process the Pu-DBP-carbonate solution currently stored in tank 13.5 even with its long processing times and dilute product concentration. Anion exchange of a heat stabilized acidified solution is a more efficient process, but requires restart of the PRC. Extended-boiling acid hydrolysis or anion exchange of a heat stabilized acidified solution provide two well developed alternatives for recovery of the Pu from the tank 13.5 carbonate. Further work defining additional recovery processes is not planned at this time

  15. Blood and hair mercury concentrations among Cree First Nations of Eeyou Istchee (Quebec, Canada): time trends, prenatal exposure and links to local fish consumption.

    Science.gov (United States)

    Ripley, Susannah; Robinson, Elizabeth; Johnson-Down, Louise; Andermann, Anne; Ayotte, Pierre; Lucas, Michel; Nieboer, Evert

    2018-12-01

    To describe exposure to methylmercury among Cree, focusing on women of childbearing age, we used data from 2 studies. Multiple regression was employed to examine associations between blood and hair mercury concentrations and consumption of locally harvested fish. Approximately 9.9% of non-pregnant women aged 15-44 y and 3.9% of pregnant women required follow-up according to Health Canada's blood mercury guidance value of 40 nmol/L. 8% of hair mercury observations in the non-pregnant women and 2.5% among pregnant women exceeded the equivalent threshold of 10 nmol/g. The geometric mean blood mercury concentration was 12.7 nmol/L in 1,429 persons aged 8 and over, and 17.7 nmol/L in adults aged 18 and older. The proportion of hair mercury concentrations greater than 12.5 nmol/g decreased in all age-sex groups when comparing the 2002-2009 data to published values for 1993-1994. Among women of childbearing age, local fish consumption was associated with increased blood and hair mercury concentrations. While over 90% of women of childbearing age in this population have acceptable levels of mercury, ongoing intake of mercury suggests that their consumption of fish with known high mercury content be minimised. Reducing consumption of fish known to be high in mercury content needs to be balanced with promoting ongoing connection to Cree culture and land-based activities that are also important determinants of health.

  16. Influences of surface and solvent on retention of HEMA/mixture components after evaporation.

    Science.gov (United States)

    Garcia, Fernanda C P; Wang, Linda; Pereira, Lúcia C G; de Andrade e Silva, Safira M; Júnior, Luiz M; Carrilho, Marcela Rocha de Oliveira

    2010-01-01

    This study examined the retention of solvents within experimental HEMA/solvent primers after two conditions for solvent evaporation: from a free surface or from dentine surface. Experimental primers were prepared by mixing 35% HEMA with 65% water, methanol, ethanol or acetone (v/v). Aliquots of each primer (50 microl) were placed on glass wells or they were applied to the surface of acid-etched dentine cubes (2mm x 2mm x 2mm) (n=5). For both conditions (i.e. from free surface or dentine cubes), change in primers mass due to solvent evaporation was gravimetrically measured for 10min at 51% RH and 21 degrees C. The rate of solvent evaporation was calculated as a function of loss of primers mass (%) over time. Data were analysed by two-way ANOVA and Student-Newman-Keuls (pevaporation rate (%/min) depending on the solvent present in the primer and the condition for evaporation (from free surface or dentine cubes) (pevaporation for HEMA/acetone primer was almost 2- to 10-times higher than for HEMA/water primer depending whether evaporation occurred, respectively, from a free surface or dentine cubes. The rate of solvent evaporation varied with time, being in general highest at the earliest periods. The rate of solvent evaporation and its retention into HEMA/solvent primers was influenced by the type of the solvent and condition allowed for their evaporation.

  17. Exposure risk assessment to ochratoxin A through consumption of juice and wine considering the effect of steam extraction time and vinification stages.

    Science.gov (United States)

    Dachery, Bruna; Veras, Flávio Fonseca; Dal Magro, Lucas; Manfroi, Vitor; Welke, Juliane Elisa

    2017-11-01

    The goals of this study were (i) to verify the effect of steam extraction used in juice production and the stages of vinification on the ochratoxin A (OTA) levels found in grapes naturally contaminated, and (ii) evaluate the risk of exposure to this toxin when the daily consumption of juice and wine is followed to prevent cardiovascular disease. OTA-producing fungi were isolated from Cabernet Sauvignon, Moscato Itálico and Concord grapes harvested from the same vineyard and intended to produce red wine, white wine and juice, respectively. The highest levels of this toxin were found in the Concord grapes used for juice production. Although greater reduction in OTA levels occurred during juice production (73%) compared to winemaking (66 and 44%, for red and white, respectively), the estimated OTA exposure through juice was higher than the tolerable intake established for this toxin by JECFA. The risk associated with juice consumption, rather than wine, can be explained by (i) higher OTA levels found in Concord must than those of Cabernet and Moscato, indicating that Concord grapes appear to be more susceptible to OTA production by toxigenic fungi; and (ii) the daily recommended juice consumption is higher than those proposed to red wine. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. Hydrocarbon solvent exposure data: compilation and analysis of the literature.

    Science.gov (United States)

    Caldwell, D J; Armstrong, T W; Barone, N J; Suder, J A; Evans, M J

    2000-01-01

    An occupational exposure database for hydrocarbon solvent end-use applications was constructed from the published literature. The database provides exposure assessment information for such purposes as regulatory risk assessments, support of industry product stewardship initiatives, and identification of applications in which limited exposure data are available. It is quantitative, documented, and based on credible data. Approximately 350 articles containing quantitative hydrocarbon solvent exposure data were identified using a search of computer databases of published literature. Many articles did not report sufficient details of the exposure data for inclusion in the database (e.g., full-shift exposure or task-based exposure data). Others were excluded because only limited summary statistics were provided, which precluded statistical analysis of the data (e.g., arithmetic mean concentration presented, but no sample number). Following evaluation, 16,880 hydrocarbon solvent exposure measurements from 99 articles were entered into a database for analysis. Methods used to identify and evaluate published solvent exposure data are described along with more detailed analysis of worker exposure to hydrocarbon solvents in three major end-use applications: painting and coating, printing, and adhesives. Solvent exposures were evaluated against current ACGIH threshold limit values (TLVs) and trends were identified. Limited quantitative data are available prior to 1970. In general, reported hydrocarbon solvent exposures decreased fourfold from 1960 to 1998, were below the TLVs applicable to specific hydrocarbon solvents at the time, and on average have been below 40% of the TLV since 1980. The database already has proved valuable; however, the utility of published exposure data could be further improved if authors consistently reported essential data elements and supporting information.

  19. Distributed lags time series analysis versus linear correlation analysis (Pearson's r) in identifying the relationship between antipseudomonal antibiotic consumption and the susceptibility of Pseudomonas aeruginosa isolates in a single Intensive Care Unit of a tertiary hospital.

    Science.gov (United States)

    Erdeljić, Viktorija; Francetić, Igor; Bošnjak, Zrinka; Budimir, Ana; Kalenić, Smilja; Bielen, Luka; Makar-Aušperger, Ksenija; Likić, Robert

    2011-05-01

    The relationship between antibiotic consumption and selection of resistant strains has been studied mainly by employing conventional statistical methods. A time delay in effect must be anticipated and this has rarely been taken into account in previous studies. Therefore, distributed lags time series analysis and simple linear correlation were compared in their ability to evaluate this relationship. Data on monthly antibiotic consumption for ciprofloxacin, piperacillin/tazobactam, carbapenems and cefepime as well as Pseudomonas aeruginosa susceptibility were retrospectively collected for the period April 2006 to July 2007. Using distributed lags analysis, a significant temporal relationship was identified between ciprofloxacin, meropenem and cefepime consumption and the resistance rates of P. aeruginosa isolates to these antibiotics. This effect was lagged for ciprofloxacin and cefepime [1 month (R=0.827, P=0.039) and 2 months (R=0.962, P=0.001), respectively] and was simultaneous for meropenem (lag 0, R=0.876, P=0.002). Furthermore, a significant concomitant effect of meropenem consumption on the appearance of multidrug-resistant P. aeruginosa strains (resistant to three or more representatives of classes of antibiotics) was identified (lag 0, R=0.992, PPearson's correlation coefficient. Correlation coefficient analysis was not able to identify relationships between antibiotic consumption and bacterial resistance when the effect was delayed. These results indicate that the use of diverse statistical methods can yield significantly different results, thus leading to the introduction of possibly inappropriate infection control measures. Copyright © 2010 Elsevier B.V. and the International Society of Chemotherapy. All rights reserved.

  20. The spectral properties of (--epigallocatechin 3-O-gallate (EGCG fluorescence in different solvents: dependence on solvent polarity.

    Directory of Open Access Journals (Sweden)

    Vladislav Snitsarev

    Full Text Available (--Epigallocatechin 3-O-gallate (EGCG a molecule found in green tea and known for a plethora of bioactive properties is an inhibitor of heat shock protein 90 (HSP90, a protein of interest as a target for cancer and neuroprotection. Determination of the spectral properties of EGCG fluorescence in environments similar to those of binding sites found in proteins provides an important tool to directly study protein-EGCG interactions. The goal of this study is to examine the spectral properties of EGCG fluorescence in an aqueous buffer (AB at pH=7.0, acetonitrile (AN (a polar aprotic solvent, dimethylsulfoxide (DMSO (a polar aprotic solvent, and ethanol (EtOH (a polar protic solvent. We demonstrate that EGCG is a highly fluorescent molecule when excited at approximately 275 nm with emission maxima between 350 and 400 nm depending on solvent. Another smaller excitation peak was found when EGCG is excited at approximately 235 nm with maximum emission between 340 and 400 nm. We found that the fluorescence intensity (FI of EGCG in AB at pH=7.0 is significantly quenched, and that it is about 85 times higher in an aprotic solvent DMSO. The Stokes shifts of EGCG fluorescence were determined by solvent polarity. In addition, while the emission maxima of EGCG fluorescence in AB, DMSO, and EtOH follow the Lippert-Mataga equation, its fluorescence in AN points to non-specific solvent effects on EGCG fluorescence. We conclude that significant solvent-dependent changes in both fluorescence intensity and fluorescence emission shifts can be effectively used to distinguish EGCG in aqueous solutions from EGCG in environments of different polarity, and, thus, can be used to study specific EGCG binding to protein binding sites where the environment is often different from aqueous in terms of polarity.

  1. Iodine removing method in organic solvent

    International Nuclear Information System (INIS)

    Suzuki, Takeo; Sakurai, Manabu

    1988-01-01

    Purpose: To effectively remove iodine in an organic solvent to thereby remove iodine in the solvent that can be re-used or put to purning treatment. Method: Organic solvent formed from wastes of nuclear facilities is mixed with basic lead acetate, or silica gel or activated carbon incorporated with such a compound to adsorb iodine in the organic solvent to the basic lead acetate. Then, iodine in the organic solvent is removed by separating to eliminate the basic lead acetate adsorbing iodine from the organic solvent or by passing the organic solvent through a tower or column charged or pre-coated with silica gel or activated carbon incorporated with lead acetate. By using basic lead acetate as the adsorbents, iodine can effective by adsorbed and eliminated. Thus, the possibility of circumstantial release of iodine can be reduced upon reusing or burning treatment of the organic solvent. (Kamimura, M.)

  2. Computer Aided Solvent Selection and Design Framework

    DEFF Research Database (Denmark)

    Mitrofanov, Igor; Conte, Elisa; Abildskov, Jens

    and computer-aided tools and methods for property prediction and computer-aided molecular design (CAMD) principles. This framework is applicable for solvent selection and design in product design as well as process design. The first module of the framework is dedicated to the solvent selection and design...... in terms of: physical and chemical properties (solvent-pure properties); Environment, Health and Safety (EHS) characteristic (solvent-EHS properties); operational properties (solvent–solute properties). 3. Performing the search. The search step consists of two stages. The first is a generation and property...... identification of solvent candidates using special software ProCAMD and ProPred, which are the implementations of computer-aided molecular techniques. The second consists of assigning the RS-indices following the reaction–solvent and then consulting the known solvent database and identifying the set of solvents...

  3. Canyon solvent cleaning with solid adsorbents

    International Nuclear Information System (INIS)

    Reif, D.J.

    1987-01-01

    The HM Process at the Savannah River Plant (SRP) uses 7.5% tributyl phosphate in n-paraffin as an extraction solvent. During use, the solvent is altered due to hydrolysis and radiolysis, forming materials that influence product losses, product decontamination, and separation efficiencies. Laboratory studies to improve online solvent cleaning have shown that carbonate washing, although removing residual solvent activity, does not remove binding ligands that hold fission products in the solvent. Treatment of solvent with a solid adsorbent removes binding ligands and significantly improves recycle solvent performance. Both laboratory work defining a full-scale adsorption process and the use of the process to clean HM Process first cycle solvent are presented

  4. Youth and Tourism Consumption

    Directory of Open Access Journals (Sweden)

    Abdolhossein Kalantari

    2008-07-01

    Full Text Available This paper tends to study tourism attitudes among the youth. It argues that in studying tourism among the youth, it is necessary to consider youth’s other behavioral factors in addition to the youth subculture. Therefore, we should study the youth culture from the view point of “Consumption”. In this view, youth tourism is equal to consumption of time, space and signs. Using ongoing theoretical debates and division, we would attempt to explore various factors of youth tourism. This article shows that youth tourism and youth culture are so mutually interconnected that we should comprehend youth tourism based on youth culture and vise versa. In conclusion, analyzing the youth subculture which is rooted in their consumption attitudes, the study attempts to understand youth tourism.

  5. Promoting seafood consumption

    DEFF Research Database (Denmark)

    Scholderer, Joachim; Grunert, Klaus G.

    was that preparing a tasty meal from fresh fish was actually not difficult. In supplemetary materials consumers were provided with recipes for fresh fish. At the same time, major retail chains made MAP-packaged fresh fish filets available in Danish supermarkets. The influence of familiy expectations was harnessed......Before and after the 3-year generic advertising campaign for fresh fish in Denmark, representative consumer samples were surveyed with regard to the attitudes towards fresh fish, perceived family norms, availability of fresh fish in shops, meal preparation skills, intentions to buy fresh fish......, and actual consumption frequencies. In the pre-campaign survey (effective N=641), significant determinants of consumption were availability in shops, meal preparation skills, and intentions to buy fresh fish. The campaign was especially designed to conquer these barriers. The key proposition...

  6. ODC-Free Solvent Implementation Issues for Vulcanized Rubber and Bond Systems

    Science.gov (United States)

    Hodgson, James R.; McCool, Alex (Technical Monitor)

    2001-01-01

    Thiokol Propulsion has worked extensively to replace 1,1,1-trichloroethane (TCA) with ozone depleting chemicals (ODC)-free solvents for use in the manufacture of the Reusable Solid Rocket Motor (RSRM) for the Space Shuttle Program. As Thiokol has transitioned from sub-scale to full-scale testing and implementation of these new solvents, issues have been discovered which have required special attention. The original intent of Thiokol's solvent replacement strategy was to replace TCA with a single drop-in solvent for all equivalent applications. We have learned that a single candidate does not exist for replacing TCA. Solvent incompatibility with process materials has caused us to seek for niche solvents and/or processing changes that provide an ODC-free solution for special applications. This paper addresses some of the solvent incompatibilities, which have lead to processes changes and possible niche solvent usage. These incompatibilities were discovered during full-scale testing of ODC-free solvents and relate to vulcanized rubber and bond systems in the RSRM. Specifically, the following items are presented: (1) Cure effects of d-limonene based solvents on Silica Filled Ethylene Propylene Diene Monomer (SF-EPDM) rubber. During full-scale test operations, Thiokol discovered that d-limonene (terpene) based solvents inhibit the cure of EPDM rubber. Subsequent testing showed the same issue with Nitrile Butadiene Rubber (NBR). Also discussed are efforts to minimize uncured rubber exposure to solvents; and (2) Cured bond system sensitivity to ODC-free solvents. During full scale testing it was discovered that a natural rubber to steel vulcanized bond could degrade after prolonged exposure to ODC-free solvents. Follow on testing showed that low vapor pressure and residence time seemed to be most likely cause for failure.

  7. Optimization of direct solvent lipid extraction kinetics on marine trebouxiophycean alga by central composite design – Bioenergy perspective

    International Nuclear Information System (INIS)

    Mathimani, Thangavel; Uma, Lakshmanan; Prabaharan, Dharmar

    2017-01-01

    Highlights: • Direct solvent extraction is an appropriate pretreatment for marine C. vulgaris. • 2:1 chloroform/methanol, 1:5 DCW/solvent, 65 °C and 120 min time are optimal variables. • Favorable R"2, Prob > F, F value and desirability ratio for all models was observed. • Precision and compatibility of the optimized process suit well with Picochlorum sp. • Fuel properties of biodiesel comply ASTM, EN and ISO standards. - Abstract: This present work compares various pretreatment techniques, single/binary solvent system, biomass drying methods and biomass particle sizes to ascertain effective lipid extraction process for marine trebouxiophycean microalga Chlorella vulgaris BDUG 91771. Of the tested methods, homogenization or direct solvent extraction (DSE) pretreatment, chloroform/methanol binary solvent system, and ≤600 µm particle size extracted maximum lipid of 22.1% irrespective of different biomass drying methods. Further, considering low energy consumption and industrial feasibility, optimization of DSE process kinetics was performed by central composite design. According to central composite design, high lipid recovery was attained with 2:1 chloroform/methanol ratio, 1:5 dry cell weight/solvent ratio, 65 °C temperature, 120 min reaction time, and it was highly validated by regression analysis, coefficient determination, F-value, coefficient variation, desirability ratio of the models. It is noteworthy that, the optimized DSE process was compatible with another trebouxiophycean alga Picochlorum sp. BDUG 91281 through biological and technical replicates. In a bioenergy outlook, fuel properties of C. vulgaris BDUG 91771 biodiesel such as degree of unsaturation (69.03), long chain saturation factor (2.49), cold filter plugging point (−9.75 °C), cloud point (8.1 °C), pour point (0.66 °C), saponification value (248.2 mg KOH/g), acid value (0.51 mg KOH/g), ash content (0.019%), insoluble impurities (0.022 g/kg) and viscosity (4.1 cSt) comply ASTM

  8. A case-control study of the protective effect of alcohol, coffee, and cigarette consumption on Parkinson disease risk: time-since-cessation modifies the effect of tobacco smoking.

    Science.gov (United States)

    van der Mark, Marianne; Nijssen, Peter C G; Vlaanderen, Jelle; Huss, Anke; Mulleners, Wim M; Sas, Antonetta M G; van Laar, Teus; Kromhout, Hans; Vermeulen, Roel

    2014-01-01

    The aim of this study was to investigate the possible reduced risk of Parkinson Disease (PD) due to coffee, alcohol, and/or cigarette consumption. In addition, we explored the potential effect modification by intensity, duration and time-since-cessation of smoking on the association between cumulative pack-years of cigarette smoking (total smoking) and PD risk. Data of a hospital based case-control study was used including 444 PD patients, diagnosed between 2006 and 2011, and 876 matched controls from 5 hospitals in the Netherlands. A novel modeling method was applied to derive unbiased estimates of the potential modifying effects of smoking intensity, duration, and time-since-cessation by conditioning on total exposure. We observed no reduced risk of PD by alcohol consumption and only a weak inverse association between coffee consumption and PD risk. However, a strong inverse association of total smoking with PD risk was observed (OR=0.27 (95%CI: 0.18-0.42) for never smokers versus highest quartile of tobacco use). The observed protective effect of total smoking was significantly modified by time-since-cessation with a diminishing protective effect after cessation of smoking. No effect modification by intensity or duration of smoking was observed indicating that both intensity and duration have an equal contribution to the reduced PD risk. Understanding the dynamics of the protective effect of smoking on PD risk aids in understanding PD etiology and may contribute to strategies for prevention and treatment.

  9. Recent solvent extraction experience at Savannah River

    International Nuclear Information System (INIS)

    Gray, L.W.; Burney, G.A.; Gray, J.H.; Hodges, M.E.; Holt, D.L.; Macafee, I.M.; Reif, D.J.; Shook, H.E.

    1986-01-01

    Tributyl phosphate-based solvent extraction processes have been used at Savannah River for more than 30 years to separate and purify thorium, uranium, neptunium, plutonium, americium, and curium isotopes. This report summarizes the advancement of solvent extraction technology at Savannah River during the 1980's. Topics that are discussed include equipment improvements, solvent treatment, waste reduction, and an improved understanding of the various chemistries in the process streams entering, within, and leaving the solvent extraction processes

  10. Solvent extraction studies of RERTR silicide fuels

    International Nuclear Information System (INIS)

    Gouge, Anthony P.

    1983-01-01

    Uranium silicide fuels, which are candidate RERTR fuel compositions, may require special considerations in solvent extraction reprocessing. Since Savannah River Plant may be reprocessing RERTR fuels as early as 1985, studies have been conducted at Savannah River Laboratory to demonstrate the solvent extraction behavior of this fuel. Results of solvent extraction studies with both unirradiated and irradiated fuel are presented along with the preliminary RERTR solvent extraction reprocessing flow sheet for Savannah River Plant. (author)

  11. Reducing consumption through communal living

    Energy Technology Data Exchange (ETDEWEB)

    Herring, Horace [The Open Univ., Milton Keynes (United Kingdom). Energy and Environment Research Unit

    2003-07-01

    This paper examines ways consumers and communities can voluntarily adopt a low consumption (or low carbon) lifestyle, often termed 'voluntary simplicity' or a policy of 'sufficiency'. There is an increasing academic literature within Europe in the last five years on the whole question of 'sustainable consumption', and the relationship between income levels and consumption particularly at the household. This debate has moved beyond 'green consumerism' to look at building 'new concepts of prosperity' through local community actions, or reducing working time to allow more time for the creation of social capital. The paper will concentrate on one aspect of the quest for sustainable communities, the relevance of communal living to reducing consumption through examining energy consumption (both direct and indirect) in one such community in the UK. The results from this preliminary study reveal that it is not the sharing of resources that reduces consumption but the mutual reinforcement of attitudes towards a low consumption lifestyle. Thus it is the creation of social capital in a community that is its key to its ecological lifestyle.

  12. Restoring solvent for nuclear separation processes

    International Nuclear Information System (INIS)

    Reif, D.J.

    1987-01-01

    Solvent extraction separation processes are used to recover usable nuclear materials from spent fuels. These processes involve the use of an extractant/diluent (solvent) for separation of the reusable actinides from unwanted fission products. The most widely used processes employ tributyl phosphate as an extractant diluted with a normal-paraffin hydrocarbon. During use, the solvent is altered due to hydrolysis and radiolysis, forming materials that influence product losses, product decontamination, and separation efficiencies. In most processes, the solvent is recycled after cleaning. Solvent cleaning generally involves scrubbing with a sodium carbonate solution. Studies at the Savannah River Laboratory have shown that carbonate washing, although removing residual solvent activity, does not remove more solvent-soluble binding ligands (formed by solvent degradation), which hold fission products in the solvent. Treatment of the solvent with a solid adsorbent after carbonate washing removes binding ligands and significantly improves recycled solvent performance. Laboratory work to establish the advantage of adsorbent cleaning and the development of a full-scale adsorption process is described. The application of this process for cleaning the first cycle solvent of a Savannah River Plant production process is discussed

  13. Solvent Extraction of Furfural From Biomass

    Science.gov (United States)

    Humphrey, M. F.

    1984-01-01

    Solvent-extraction method reduces energy required to remove furfural produced during acid hydrolysis of biomass. Acid hydrolysis performed in vessel containing both solvents and reacting ingredients. With intimate contact between solvents and aqueous hydrolyis liqour, furfural removed form liquor almost as fast as it forms.

  14. Adaptive Resolution Simulation of MARTINI Solvents

    NARCIS (Netherlands)

    Zavadlav, Julija; Melo, Manuel N.; Cunha, Ana V.; de Vries, Alex H.; Marrink, Siewert J.; Praprotnik, Matej

    We present adaptive resolution dynamics simulations of aqueous and apolar solvents coarse-grained molecular models that are compatible with the MARTINI force field. As representatives of both classes solvents we have chosen liquid water and butane, respectively, at ambient temperature. The solvent

  15. The Effect of Nitroxin Biofertilizer and Foliar Applicatin of Micronutrients Time Consumption on Yield and Yield Components of New Wheat Cultivars under Khorramabad Climatic Conditions

    Directory of Open Access Journals (Sweden)

    A. Vaez

    2016-02-01

    Full Text Available Introduction In order to study the effects of Nitroxin biofertilizer and foliar application of micronutrients time consumption on yield and yield components of new wheat cultivars (Triticum aestivum & T. durum under Khorramabad climatic conditions, an experiment was conducted as factorial based on a randomized complete block design with three replications at the research farm khorramabad during growing season of 2012-2013. Considering the positive effect of inoculation with bio-fertilizer and foliar Nitroxin micronutrients and reaction of cultivars to this type of fertilizer instead of chemical fertilizers and the importance of wheat as one of the main crops, this study aims to determine the most appropriate time for foliar and Nitroxin application of micronutrients at the different stages of plant growth and bio-fertilizer application on yield and yield components. Materials and Methods The first factor was considered in six levels: N0: The lack of the seed insemination with nitroxin biofertilizer and without the foliar application of micronutrients (control, N1: the seed inoculation with the nitroxin biofertilizer, N2: the foliar application of micronutrients at the jointing stage, N3: the foliar application of micronutrients at the heading stage, N4: the seed insemination with nitroxin biofertilizer and foliar application of micronutrients at the jointing stage, N5: the seed insemination with nitroxin biofertilizer and foliar application of micronutrients at the heading stage. The second factor was considered at two levels, consisting: V1: Parsi cultivar and V2: Dena cultivar. MSTATC Software was used for data analysis and means were compared by Duncan's multiple range test at the 5% level. Results and Discussion In this experiment the grain yield, biological yield, harvest index, 1000- grain weight, spike number per m-2, grain number per spike and spikelet number per spike of wheat were studied. The results of the data variance analysis has

  16. The Solvent Selection framework: solvents for organic synthesis, separation processes and ionic-organic synthesis

    DEFF Research Database (Denmark)

    Mitrofanov, Igor; Sansonetti, Sascha; Abildskov, Jens

    2012-01-01

    This paper presents a systematic integrated framework for solvent selection and solvent design. The framework is divided into several modules, which can tackle specific problems in various solvent-based applications. In particular, three modules corresponding to the following solvent selection pr...

  17. Solvent cleaning system and method for removing contaminants from solvent used in resin recycling

    Science.gov (United States)

    Bohnert, George W [Harrisonville, MO; Hand, Thomas E [Lee's Summit, MO; DeLaurentiis, Gary M [Jamestown, CA

    2009-01-06

    A two step solvent and carbon dioxide based system that produces essentially contaminant-free synthetic resin material and which further includes a solvent cleaning system for periodically removing the contaminants from the solvent so that the solvent can be reused and the contaminants can be collected and safely discarded in an environmentally safe manner.

  18. Scenarios Evaluation Tool for Chlorinated Solvent MNA

    Energy Technology Data Exchange (ETDEWEB)

    Vangelas, Karen; Michael J. Truex; Charles J. Newell; Brian Looney

    2007-02-28

    Over the past three decades, much progress has been made in the remediation of chlorinated solvents from the subsurface. Yet these pervasive contaminants continue to present a significant challenge to the U.S. Department of Energy (DOE), other federal agencies, and other public and private organizations. The physical and chemical properties of chlorinated solvents make it difficult to rapidly reach the low concentrations typically set as regulatory limits. These technical challenges often result in high costs and long remediation time frames. In 2003, the DOE through the Office of Environmental Management funded a science-based technical project that uses the U.S. Environmental Protection Agency's technical protocol (EPA, 1998) and directives (EPA, 1999) on Monitored Natural Attenuation (MNA) as the foundation on which to introduce supporting concepts and new scientific developments that will support remediation of chlorinated solvents based on natural attenuation processes. This project supports the direction in which many site owners want to move to complete the remediation of their site(s), that being to complete the active treatment portion of the remedial effort and transition into MNA. The overarching objective of the effort was to examine environmental remedies that are based on natural processes--remedies such as Monitored Natural Attenuation (MNA) or Enhanced Attenuation (EA). The research program did identify several specific opportunities for advances based on: (1) mass balance as the central framework for attenuation based remedies, (2) scientific advancements and achievements during the past ten years, (3) regulatory and policy development and real-world experience using MNA, and (4) exploration of various ideas for integrating attenuation remedies into a systematic set of ''combined remedies'' for contaminated sites. These opportunities are summarized herein and are addressed in more detail in referenced project documents and

  19. A consumption value-gap analysis for sustainable consumption.

    Science.gov (United States)

    Biswas, Aindrila

    2017-03-01

    Recent studies on consumption behavior have depicted environmental apprehension resulting from across wide consumer segments. However, this has not been widely reflected upon the growth in the market shares for green or environment-friendly products mostly because gaps exist between consumers' expectations and perceptions for those products. Previous studies have highlighted the impact of perceived value on potential demand, consumer satisfaction and behavioral intentions. The necessity to understand the effects of gaps in expected and perceived values on consumers' behavioral intention and potential demand for green products cannot be undermined as it shapes the consumers' inclination to repeated purchase and consumption and thus foster potential market demand. Pertaining to this reason, the study aims to adopt a consumption value-gap model based on the theory of consumption values to assess their impact on sustainable consumption behavior and market demand of green products. Consumption value refers to the level of fulfillment of consumer needs by assessment of net utility derived after effective comparison between the benefits (financial or emotional) and the gives (money, time, or energy). The larger the gaps the higher will be the adversarial impact on behavioral intentions. A structural equation modeling was applied to assess data collected through questionnaire survey. The results indicate that functional value-gap and environmental value-gap has the most adversarial impact on sustainable consumption behavior and market demand for green products.

  20. Forecasting Alcohol Consumption in the Czech Republic

    Directory of Open Access Journals (Sweden)

    Tereza Slováčková

    2016-01-01

    Full Text Available The paper deals with a forecast of developments in alcohol consumption based on current alcohol consumption per capita (expressed in litres of pure alcohol, and time series extrapolations. Alcohol consumption is to be considered from the vantage point of knowing the specifics of the product and the consequences of its excessive consumption. The predictive methodology makes use of the Box‑Jenkins method; the ARIMA model, taking into account the autocorrelation and partial autocorrelation process, which is a prerequisite for the successful identification of a time series model; model parameter estimation; appropriate transformations of time series; determining the order of differentiation and subsequent verification of the model. The chosen methodology for future trends in alcohol consumptions is a prerequisite for the proposed optional measures to control alcohol consumption in the Czech Republic. Due to the long term nature of the process to draw up and implement alcohol consumption regulation measures, the forecast covers the forthcoming 10 years.

  1. Cooling crystallization of Indomethacin from different organic solvents

    DEFF Research Database (Denmark)

    Malwade, Chandrakant Ramkrishna; Qu, Haiyan

    , 25, 35, and 45 °C. The solvents with varying polarities (ethanol, methanol, ethyl acetate, acetone, acetonitrile, and dichloromethane) were used for solubility measurement. Maximum solubility of IMC was observed in acetone, while acetonitrile showed the lowest solubility. Solid phase analysis...... of excess solute with XRPD and Raman spectroscopy confirmed formation of IMC solvate in acetone, methanol and dichloromethane at 15 °C. Based on solubility of IMC, the solvents ethanol, ethyl acetate, acetone, and dichloromethane were selected for crystallization experiments. Nucleation kinetics of IMC...... in selected solvents was investigated through the measurement of induction time at 5 °C and 15 °C. Longer induction times were observed for IMC in ethanol at both temperatures compared to the one in acetone. Metastable α form of IMC was obtained from ethanol, while solvate of IMC was produced from acetone....

  2. Optimizing the space-time-yield and the specific energy consumption of molten salt electrolysis processes for the electrowinning of metals in subgroups 4 and 5 of the periodic table of elements

    International Nuclear Information System (INIS)

    Koeck, W.

    1988-04-01

    Disadvantages of molten salt electrolysis are its low space-time-yield (kg/m 3 h) combined with its high specific energy consumption (kWh/kg). These factors essentially determine how electrolysis is applied on an industrial scale. The electrolysis of tantalum was selected as an example representative for other electrolytic processes; this series of tests allow statements also on the winning of the other elements from subgroups 4 and 5 of the periodic table, and on electrolytic aluminium extraction. Optimal operating conditions for direct current electrolysis were determined in the laboratory by varying the current density and the electrolysis temperature. In order to improve the space-time-yield from an existing electrolytic cell with a given electrolyte composition beyond the optimal range of direct current electrolysis, the process of periodic current reversal is applied. In this process, the polarity is reversed for a short time at constant periodic intervals. If the forward time period and the backward time period are chosen in a suitable way, both the current efficiency and the space-time-yield can be improved without increasing the energy consumption. 59 refs., 48 figs., 8 tabs. (Author)

  3. Insecticide solvents: interference with insecticidal action.

    Science.gov (United States)

    Brattsten, L B; Wilkinson, C F

    1977-06-10

    Several commercial solvent mixtures commonly used as insecticide carriers in spray formulations increase by more than threefold the microsomal N-demethylation of p-chloro N-methylaniline in midgut preparations of southern army-worm (Spodoptera eridania) larvae exposed orally to the test solvents. Under laboratory conditions, the same solvent mixtures exhibit a protective action against the in vivo toxicity of the insecticide carbaryl to the larvae. The data are discussed with respect to possible solvent-insecticide interactions occurring under field conditions and, more broadly, to potential toxicological hazards of these solvents to humans.

  4. Organic solvents in electromembrane extraction: recent insights

    DEFF Research Database (Denmark)

    Huang, Chuixiu; Gjelstad, Astrid; Pedersen-Bjergaard, Stig

    2016-01-01

    the introduction. Under the influence of an electrical field, EME is based on electrokinetic migration of the analytes through a supported liquid membrane (SLM), which is an organic solvent immobilized in the pores of the polymeric membrane, and into the acceptor solution. Up to date, close to 150 research...... articles with focus on EME have been published. The current review summarizes the performance of EME with different organic solvents and discusses several criteria for efficient solvents in EME. In addition, the authors highlight their personal perspective about the most promising organic solvents for EME...... and have indicated that more fundamental work is required to investigate and discover new organic solvents for EME....

  5. Interference from ordinarily used solvents in the outcomes of Artemia salina lethality test

    Directory of Open Access Journals (Sweden)

    Sahgal Geethaa

    2013-01-01

    Full Text Available Methanol, ethanol, Tween 20 and dimethyl sulfoxide (DMSO are widely used as dissolving agents in Artemia salina lethality test (aka brine shrimp lethality test [BSLT] to screen the pharmaceutical properties of natural products. Nevertheless, there is lack of toxicity level of these solvents against brine shrimp. High concentration of these organic solvent might be toxic for this zoology invertebrate and interfere in the experimental outcomes. To avoid this, permissible concentration of the solvents used in BSLT was identified. BSLT was performed to evaluate the toxicity effect of Tween 20, methanol, ethanol and DMSO at 24 h post-treatment time point against A. salina. The suggested maximum working concentration (v/v for DMSO, methanol, ethanol was found to be 1.25% and that for Tween 20 was 0.16%. LC 50 for the solvents were 8.5% (DMSO, 6.4% (methanol, 3.4% (ethanol and 2.5% (Tween 20. The findings have shown a toxicity level among the solvents in descending order as Tween 20 > ethanol > methanol > DMSO. DMSO is a safer solvent to be used in BSLT compared with other tested solvents, whereas Tween 20 has been shown to be the most stringent solvent among the tested solvents. The findings are resourcefully useful to avoid interference of solvents in the assessment of natural products using BSLT.

  6. Two time-series analyses of the impact of antibiotic consumption and alcohol-based hand disinfection on the incidences of nosocomial methicillin-resistant Staphylococcus aureus infection and Clostridium difficile infection.

    Science.gov (United States)

    Kaier, Klaus; Hagist, Christian; Frank, Uwe; Conrad, Andreas; Meyer, Elisabeth

    2009-04-01

    To determine the impact of antibiotic consumption and alcohol-based hand disinfection on the incidences of nosocomial methicillin-resistant Staphylococcus aureus (MRSA) infection and Clostridium difficile infection (CDI). Two multivariate time-series analyses were performed that used as dependent variables the monthly incidences of nosocomial MRSA infection and CDI at the Freiburg University Medical Center during the period January 2003 through October 2007. The volume of alcohol-based hand rub solution used per month was quantified in liters per 1,000 patient-days. Antibiotic consumption was calculated in terms of the number of defined daily doses per 1,000 patient-days per month. The use of alcohol-based hand rub was found to have a significant impact on the incidence of nosocomial MRSA infection (Phand rub was associated with a lower incidence of nosocomial MRSA infection. Conversely, a higher level of consumption of selected antimicrobial agents was associated with a higher incidence of nosocomial MRSA infection. This analysis showed this relationship was the same for the use of second-generation cephalosporins (P= .023), third-generation cephalosporins (P= .05), fluoroquinolones (P= .01), and lincosamides (P= .05). The multivariate analysis (R2=0.55) showed that a higher level of consumption of third-generation cephalosporins (P= .008), fluoroquinolones (P= .084), and/or macrolides (P= .007) was associated with a higher incidence of CDI. A correlation with use of alcohol-based hand rub was not detected. In 2 multivariate time-series analyses, we were able to show the impact of hand hygiene and antibiotic use on the incidence of nosocomial MRSA infection, but we found no association between hand hygiene and incidence of CDI.

  7. Changes of temperature data for energy studies over time and their impact on energy consumption and CO2 emissions. The case of Athens and Thessaloniki – Greece

    Energy Technology Data Exchange (ETDEWEB)

    Papakostas, K.T.; Michopoulos, A.; Kyriakis, N. [Process Equipment Design Laboratory, Mechanical Engineering Department, Energy Division, Aristotle University of Thessaloniki - 54124 Thessaloniki (Greece); Mavromatis, T. [Department of Meteorology-Climatology, School of Geology, Faculty of Sciences, Aristotle University of Thessaloniki - 54124 Thessaloniki (Greece)

    2013-07-01

    In steady-state methods for estimating energy consumption of buildings, the commonly used data include the monthly average dry bulb temperatures, the heating and cooling degree-days and the dry bulb temperature bin data. This work presents average values of these data for the 1983-1992 and 1993-2002 decades, calculated for Athens and Thessaloniki, determined from hourly dry bulb temperature records of meteorological stations (National Observatory of Athens and Aristotle University of Thessaloniki). The results show that the monthly average dry bulb temperatures and the annual average cooling degree-days of the 1993-2002 decade are increased, compared to those of the 1983-1992 decade, while the corresponding annual average heating degree-days are reduced. Also, the low temperature bins frequency results decreased in the 1993-2002 decade while the high temperature ones increased, compared to the 1983-1992 decade. The effect of temperature data variations on the energy consumption and on CO2 emissions of buildings was examined by calculating the energy demands for heating and cooling and the CO2 emissions from diesel-oil and electricity use of a typical residential building-model. From the study it is concluded that the heating energy requirements during the decade 1993-2002 were decreased, as compared to the energy demands of the decade 1983-1992, while the cooling energy requirements were increased. The variations of CO2 emissions from diesel oil and electricity use were analog to the energy requirements alterations. The results indicate a warming trend, at least for the two regions examined, which affect the estimation of heating and cooling demands of buildings. It, therefore, seems obvious that periodic adaptation of the temperature data used for building energy studies is required.

  8. A comparative study on the effect of solvent on nucleophilic fluorination with [18F]fluoride. Protic solvents as co-solvents in SN2 and SNAr reactions

    International Nuclear Information System (INIS)

    Koivula, T.; Simecek, J.; Jalomaeki, J.; Helariutta, K.; Airaksinen, A.J.

    2011-01-01

    The effect of solvent on nucleophilic substitution with cyclotron-produced [ 18 F]fluoride was studied in polar aprotic (CH 3 CN and DMF) and protic solvent (t-BuOH and t-amyl alcohol) mixtures (CH 3 CN/co-solvent, 2:8) in a series of model compounds, 4-(R 1 -methyl)benzyl R 2 -benzoates, using a K2.2.2/[ 18 F]KF phase transfer system (R 1 = -Cl, -OMs or -OH; R 2 = -Cl, -I or -NO 2 ). 18 F-fluorination of compounds 1-3, with chloride or mesylate as a leaving group in the benzylic position (R 1 ), afforded the desired 4-([ 18 F]fluoromethyl)benzyl analogues in all solvents during 15 min reaction time. The highest radiochemical yields (RCY) in all the studied reaction temperatures (80, 120 and 160 C) were achieved in CH 3 CN. Radiochemical yields in protic solvents were comparable to RCY in CH 3 CN only with the sulfonate ester 3 as a starting material. 18 F-Fluorination of the benzylic halides 1 and 2 was not promoted in the same extent; in addition, labelled side-products were detected at higher reaction temperatures. Radiofluorination in tert-alcohols was also studied using [ 18 F]CsF with and without added phase transfer catalyst, resulting in both conditions lower RCY when compared to K2.2.2/[ 18 F]KF system. Protic solvents were not able to promote aromatic 18 F-fluorination. 18 F-Fluorination of compound 5, having para-activated nitro group in the aromatic position (R 2 ), failed in tert-alcohols even at the highest temperature, but it was labelled successfully in DMF and to some extent in CH 3 CN. (orig.)

  9. Energy consumption: energy consumption in mainland Norway

    Energy Technology Data Exchange (ETDEWEB)

    Magnussen, Inger Helene; Killingland, Magnus; Spilde, Dag

    2012-07-25

    The purpose of this report is to describe trends in energy consumption in mainland Norway, with an emphasis on key trends within the largest consumer groups. We also explain common terms and concepts in the field of energy consumption. Finally, we look at forecasts for future energy consumption, produced by bodies outside NVE. Total final energy consumption in mainland Norway in 2009 was 207 TWh. The most important end-user groups are households, service industries, manufacturing industry and transport. In addition, the energy sector in mainland Norway consumed 15 TWh. Energy consumed in the energy sector is not considered as final consumption, as the energy is used to produce new energy products. The long-term trend in energy consumption in mainland Norway is that fuel in the transport sector and electricity for the energy sector increases, while energy consumption in other sectors flattens out. The main reason for an increased use of fuel in the transport sector is the rise in the number of motorised machinery and vehicles in mainland Norway. This has caused a rise in gasoline and diesel consumption of 75 per cent since 1976. The petroleum sector is the largest consumer of energy within the energy sector in mainland Norway, and electricity from onshore to platforms in the North Sea and to new shore side installations has led to a rise in electricity consumption from 1 TWh in 1995 to 5 TWh in 2009. The energy consumption in households showed flat trend from 1996 to 2009, after many years of growth. The main reasons are a warmer climate, higher energy prices, the use of heats pumps and more energy-efficient buildings. In the service industries, the growth in energy consumptions has slightly decreased since the late 1990s, for much the same reasons as for households. In manufacturing industries the energy consumption have flatten out mainly due to the closure of energy-intensive businesses and the establishment of new more energy-efficient businesses. Electricity is

  10. Measurement of dielectric constant of organic solvents by indigenously developed dielectric probe

    Science.gov (United States)

    Keshari, Ajay Kumar; Rao, J. Prabhakar; Rao, C. V. S. Brahmmananda; Ramakrishnan, R.; Ramanarayanan, R. R.

    2018-04-01

    The extraction, separation and purification of actinides (uranium and plutonium) from various matrices are an important step in nuclear fuel cycle. One of the separation process adopted in an industrial scale is the liquid-liquid extraction or solvent extraction. Liquid-liquid extraction uses a specific ligand/extractant in conjunction with suitable diluent. Solvent extraction or liquid-liquid extraction, involves the partitioning of the solute between two immiscible phases. In most cases, one of the phases is aqueous, and the other one is an organic solvent. The solvent used in solvent extraction should be selective for the metal of interest, it should have optimum distribution ratio, and the loaded metal from the organic phase should be easily stripped under suitable experimental conditions. Some of the important physical properties which are important for the solvent are density, viscosity, phase separation time, interfacial surface tension and the polarity of the extractant.

  11. Advanced integrated solvent extraction systems

    Energy Technology Data Exchange (ETDEWEB)

    Horwitz, E.P.; Dietz, M.L.; Leonard, R.A. [Argonne National Lab., IL (United States)

    1997-10-01

    Advanced integrated solvent extraction systems are a series of novel solvent extraction (SX) processes that will remove and recover all of the major radioisotopes from acidic-dissolved sludge or other acidic high-level wastes. The major focus of this effort during the last 2 years has been the development of a combined cesium-strontium extraction/recovery process, the Combined CSEX-SREX Process. The Combined CSEX-SREX Process relies on a mixture of a strontium-selective macrocyclic polyether and a novel cesium-selective extractant based on dibenzo 18-crown-6. The process offers several potential advantages over possible alternatives in a chemical processing scheme for high-level waste treatment. First, if the process is applied as the first step in chemical pretreatment, the radiation level for all subsequent processing steps (e.g., transuranic extraction/recovery, or TRUEX) will be significantly reduced. Thus, less costly shielding would be required. The second advantage of the Combined CSEX-SREX Process is that the recovered Cs-Sr fraction is non-transuranic, and therefore will decay to low-level waste after only a few hundred years. Finally, combining individual processes into a single process will reduce the amount of equipment required to pretreat the waste and therefore reduce the size and cost of the waste processing facility. In an ongoing collaboration with Lockheed Martin Idaho Technology Company (LMITCO), the authors have successfully tested various segments of the Advanced Integrated Solvent Extraction Systems. Eichrom Industries, Inc. (Darien, IL) synthesizes and markets the Sr extractant and can supply the Cs extractant on a limited basis. Plans are under way to perform a test of the Combined CSEX-SREX Process with real waste at LMITCO in the near future.

  12. Solvent Bonding for Fabrication of PMMA and COP Microfluidic Devices.

    Science.gov (United States)

    Wan, Alwin M D; Moore, Thomas A; Young, Edmond W K

    2017-01-17

    Thermoplastic microfluidic devices offer many advantages over those made from silicone elastomers, but bonding procedures must be developed for each thermoplastic of interest. Solvent bonding is a simple and versatile method that can be used to fabricate devices from a variety of plastics. An appropriate solvent is added between two device layers to be bonded, and heat and pressure are applied to the device to facilitate the bonding. By using an appropriate combination of solvent, plastic, heat, and pressure, the device can be sealed with a high quality bond, characterized as having high bond coverage, bond strength, optical clarity, durability over time, and low deformation or damage to microfeature geometry. We describe the procedure for bonding devices made from two popular thermoplastics, poly(methyl-methacrylate) (PMMA), and cyclo-olefin polymer (COP), as well as a variety of methods to characterize the quality of the resulting bonds, and strategies to troubleshoot low quality bonds. These methods can be used to develop new solvent bonding protocols for other plastic-solvent systems.

  13. Dissolution of covalent adaptable network polymers in organic solvent

    Science.gov (United States)

    Yu, Kai; Yang, Hua; Dao, Binh H.; Shi, Qian; Yakacki, Christopher M.

    2017-12-01

    It was recently reported that thermosetting polymers can be fully dissolved in a proper organic solvent utilizing a bond-exchange reaction (BER), where small molecules diffuse into the polymer, break the long polymer chains into short segments, and eventually dissolve the network when sufficient solvent is provided. The solvent-assisted dissolution approach was applied to fully recycle thermosets and their fiber composites. This paper presents the first multi-scale modeling framework to predict the dissolution kinetics and mechanics of thermosets in organic solvent. The model connects the micro-scale network dynamics with macro-scale material properties: in the micro-scale, a model is developed based on the kinetics of BERs to describe the cleavage rate of polymer chains and evolution of chain segment length during the dissolution. The micro-scale model is then fed into a continuum-level model with considerations of the transportation of solvent molecules and chain segments in the system. The model shows good prediction on conversion rate of functional groups, degradation of network mechanical properties, and dissolution rate of thermosets during the dissolution. It identifies the underlying kinetic factors governing the dissolution process, and reveals the influence of different material and processing variables on the dissolution process, such as time, temperature, catalyst concentration, and chain length between cross-links.

  14. Electricity consumption in Geneva's businesses and administration

    International Nuclear Information System (INIS)

    Bassand, M.; Malatesta, D.; Chevalier, H.

    1999-01-01

    The article describes a data-collection project that gave an overview of energy consumption in Geneva's businesses and the canton's administration. For the first time, data on the patterns of use of electrical equipment were collected. The development of the sampling process is discussed, and the development of the categories defined for the analysis of the results is described. The role of various types of objects and their typical electricity consumption is discussed and trends in consumption are described. Results discussed include electricity consumption per employee and the degree of awareness regarding costs and consumption in various business types

  15. Solvent extraction of radionuclides from aqueous tank waste

    International Nuclear Information System (INIS)

    Bonnesen, P.V.; Sachleben, R.A.; Moyer, B.A.

    1996-01-01

    The purpose of this task is to develop an efficient solvent-extraction and stripping process for the removal of the fission products Tc-99, Sr-90, and Cs-137 from alkaline tank wastes, such as those stored at Hanford and Oak Ridge. As such, this task expands upon FY 1995's successful development of a solvent-extraction and stripping process for technetium separation from at sign e tank-waste solutions. This process has in fact already been extended to include the capability of removing both Tc and Sr simultaneously. In this form, the process has been given the name SRTALK and will be developed further in this program as a prelude to developing a system capable of removing Tc, Sr, and Cs together. Such a system could potentially simplify and improve fission-product removal from tank waste. In addition, it would possess the advantages already inherent in our Tc solvent-extraction process: No required feed adjustment, economical water stripping, low consumption of materials, and low waste volume

  16. Hydrophobic deep eutectic solvents as water-immiscible extractants

    NARCIS (Netherlands)

    Osch, van D.J.G.P.; Zubeir, L.F.; Bruinhorst, van den A.; Alves da Rocha, M.A.; Kroon, M.C.

    2015-01-01

    Hydrophobic deep eutectic solvents (DESs) are presented for the first time. They consist of decanoic acid and various quaternary ammonium salts. The effect of the alkyl chains on the hydrophobicity and the equilibrium of the two-phase DES–water system were investigated. These new DESs were

  17. Effect of solvent-induced structural modifications on optical ...

    Indian Academy of Sciences (India)

    Administrator

    use of methanol as solvent leads to a strong enhancement of PL intensity of CdS quantum dots for use in opto- electronic ... obtain a clearer understanding of the relative importance ... deionized water and ethanol several times and dried in.

  18. Dynamic materials accounting for solvent-extraction systems

    Energy Technology Data Exchange (ETDEWEB)

    Cobb, D.D.; Ostenak, C.A.

    1979-01-01

    Methods for estimating nuclear materials inventories in solvent-extraction contactors are being developed. These methods employ chemical models and available process measurements. Comparisons of model calculations and experimental data for mixer-settlers and pulsed columns indicate that this approach should be adequate for effective near-real-time materials accounting in nuclear fuels reprocessing plants.

  19. Dynamic materials accounting for solvent-extraction systems

    International Nuclear Information System (INIS)

    Cobb, D.D.; Ostenak, C.A.

    1979-01-01

    Methods for estimating nuclear materials inventories in solvent-extraction contactors are being developed. These methods employ chemical models and available process measurements. Comparisons of model calculations and experimental data for mixer-settlers and pulsed columns indicate that this approach should be adequate for effective near-real-time materials accounting in nuclear fuels reprocessing plants

  20. Structuring of thin-film polymer mixtures upon solvent evaporation

    NARCIS (Netherlands)

    Schaefer, C.; Michels, J.J.; van der Schoot, P.P.A.M.

    2016-01-01

    We theoretically study the impact of solvent evaporation on the dynamics of isothermal phase separation of ternary polymer solutions in thin films. In the early stages we obtain a spinodal length scale that decreases with time under the influence of ongoing evaporation. After that rapid demixing

  1. Structuring of Thin-Film Polymer Mixtures upon Solvent Evaporation

    NARCIS (Netherlands)

    Schaefer, C.; Michels, J. J.; van der Schoot, P.

    2016-01-01

    We theoretically study the impact of solvent evaporation on the dynamics of isothermal phase separation of ternary polymer solutions in thin films. In the early stages we obtain a spinodal length scale that decreases with time under the influence of ongoing evaporation. After that rapid demixing

  2. Consumption Habits and Humps

    DEFF Research Database (Denmark)

    Kraft, Holger; Munk, Claus; Seifried, Frank Thomas

    2017-01-01

    We show that the optimal consumption of an individual over the life cycle can have the hump shape (inverted U-shape) observed empirically if the preferences of the individual exhibit internal habit formation. In the absence of habit formation, an impatient individual would prefer a decreasing...... consumption path over life. However, because of habit formation, a high initial consumption would lead to high required consumption in the future. To cover the future required consumption, wealth is set aside, but the necessary amount decreases with age which allows consumption to increase in the early part...... of life. At some age, the impatience outweighs the habit concerns so that consumption starts to decrease. We derive the optimal consumption strategy in closed form, deduce sufficient conditions for the presence of a consumption hump, and characterize the age at which the hump occurs. Numerical examples...

  3. Consumption Habits and Humps

    DEFF Research Database (Denmark)

    Kraft, Holger; Munk, Claus; Seifried, Frank Thomas

    We show that the optimal consumption of an individual over the life cycle can have the hump shape (inverted U-shape) observed empirically if the preferences of the individual exhibit internal habit formation. In the absence of habit formation, an impatient individual would prefer a decreasing...... consumption path over life. However, because of habit formation, a high initial consumption would lead to high required consumption in the future. To cover the future required consumption, wealth is set aside, but the necessary amount decreases with age which allows consumption to increase in the early part...... of life. At some age, the impatience outweighs the habit concerns so that consumption starts to decrease. We derive the optimal consumption strategy in closed form, deduce sufficient conditions for the presence of a consumption hump, and characterize the age at which the hump occurs. Numerical examples...

  4. Theory of polyelectrolytes in solvents.

    Science.gov (United States)

    Chitanvis, Shirish M

    2003-12-01

    Using a continuum description, we account for fluctuations in the ionic solvent surrounding a Gaussian, charged chain and derive an effective short-ranged potential between the charges on the chain. This potential is repulsive at short separations and attractive at longer distances. The chemical potential can be derived from this potential. When the chemical potential is positive, it leads to a meltlike state. For a vanishingly low concentration of segments, this state exhibits scaling behavior for long chains. The Flory exponent characterizing the radius of gyration for long chains is calculated to be approximately 0.63, close to the classical value obtained for second order phase transitions. For short chains, the radius of gyration varies linearly with N, the chain length, and is sensitive to the parameters in the interaction potential. The linear dependence on the chain length N indicates a stiff behavior. The chemical potential associated with this interaction changes sign, when the screening length in the ionic solvent exceeds a critical value. This leads to condensation when the chemical potential is negative. In this state, it is shown using the mean-field approximation that spherical and toroidal condensed shapes can be obtained. The thickness of the toroidal polyelectrolyte is studied as a function of the parameters of the model, such as the ionic screening length. The predictions of this theory should be amenable to experimental verification.

  5. Solvent annealing induced phase separation and dewetting in PMMA∕SAN blend film: film thickness and solvent dependence.

    Science.gov (United States)

    You, Jichun; Zhang, Shuangshuang; Huang, Gang; Shi, Tongfei; Li, Yongjin

    2013-06-28

    The competition between "dewetting" and "phase separation" behaviors in polymer blend films attracts significant attention in the last decade. The simultaneous phase separation and dewetting in PMMA∕SAN [poly(methyl methacrylate) and poly(styrene-ran-acrylonitrile)] blend ultrathin films upon solvent annealing have been observed for the first time in our previous work. In this work, film thickness and annealing solvent dependence of phase behaviors in this system has been investigated using atomic force microscopy and grazing incidence small-angle X-ray scattering (GISAXS). On one hand, both vertical phase separation and dewetting take place upon selective solvent vapor annealing, leading to the formation of droplet∕mimic-film structures with various sizes (depending on original film thickness). On the other hand, the whole blend film dewets the substrate and produces dispersed droplets on the silicon oxide upon common solvent annealing. GISAXS results demonstrate the phase separation in the big dewetted droplets resulted from the thicker film (39.8 nm). In contrast, no period structure is detected in small droplets from the thinner film (5.1 nm and 9.7 nm). This investigation indicates that dewetting and phase separation in PMMA∕SAN blend film upon solvent annealing depend crucially on the film thickness and the atmosphere during annealing.

  6. Modifications of the SEPHIS computer code for calculating the Purex solvent extraction system

    International Nuclear Information System (INIS)

    Watson, S.B.; Rainey, R.H.

    1975-12-01

    The SEPHIS computer program was developed to simulate the countercurrent solvent extraction. This report gives modifications in the program which result in improved fit to experimental data, a decrease in computer storage requirements, and a decrease in execution time. Methods for applying the computer program to practical solvent extraction problems are explained

  7. Dry Martini, a Coarse-Grained Force Field for Lipid Membrane Simblations with Implicit Solvent

    NARCIS (Netherlands)

    Arnarez, Clement; Uusitalo, Jaakko J.; Masman, Marcelo F.; Ingolfsson, Helgi I.; de Jong, Djurre H.; Melo, Manuel N.; Periole, Xavier; de Vries, Alex H.; Marrink, Siewert J.

    Coarse-grained (CG) models allow simulation of larger systems for longer times by decreasing the number of degrees of freedom compared with all-atom models. Here we introduce an implicit-solvent version of the popular CG Martini model, nicknamed Dry Martini. To account for the omitted solvent

  8. Nitropyrroles, Diels-Alder reactions assisted by microwave irradiation and solvent effect. An experimental and theoretical study

    Science.gov (United States)

    Mancini, Pedro M. E.; Kneeteman, María N.; Cainelli, Mauro; Ormachea, Carla M.; Domingo, Luis R.

    2017-11-01

    The behaviors of N-tosylnitropyrroles acting as electrophilic dienophiles in polar Diels-Alder reactions joint to different dienes of increeased nucleophilicity are analyzed. The reactions were developed under microwave irradiation using toluene or protic ionic liquids (PILs) as solvents and in free solvent conditions. In all the cases explored we observed good yields in short reaction times. For these reactions, the free solvent condition and the use of protic ionic liquids as solvents offer similar results. However, the free solvent conditions favor environmental sustainability. The role of PILs in these polar Diels-Alder reactions has been theoretically studied within the Molecular Electron Density Theory.

  9. Sustainable development of gree solvent separation process

    OpenAIRE

    Lisickov, Kiril; Fidancevska, Emilija; Grujic, Radoslav; Srebrenkoska, Vineta; Kuvendziev, Stefan

    2011-01-01

    Solvents defi ne a major part of the environmental performance of processes in the chemical industry and impact on cost, safety and health issues. The idea of green solvents expresses the goal to minimize the environmental impact resulting from the use of solvents in chemical production. In spite of conventional separation methods, precise process green technologies are based on the application of modern processes and process equipment as well as control and management...

  10. Supercritical solvent extraction of oil sand bitumen

    Science.gov (United States)

    Imanbayev, Ye. I.; Ongarbayev, Ye. K.; Tileuberdi, Ye.; Mansurov, Z. A.; Golovko, A. K.; Rudyk, S.

    2017-08-01

    The supercritical solvent extraction of bitumen from oil sand studied with organic solvents. The experiments were performed in autoclave reactor at temperature above 255 °C and pressure 29 atm with stirring for 6 h. The reaction resulted in the formation of coke products with mineral part of oil sands. The remaining products separated into SARA fractions. The properties of the obtained products were studied. The supercritical solvent extraction significantly upgraded extracted natural bitumen.

  11. Canyon solvent cleaning with activated alumina

    International Nuclear Information System (INIS)

    Reif, D.J.

    1987-01-01

    This paper presents recent work at SRL concerning the cleaning of solvent extraction solvent used at SRP. The paper explains why we undertook the work, and some laboratory studies on two approaches to solvent cleaning, namely extended carbonate washing and use of solid adsorbents. The paper then discusses scale-up of the preferred method and the results of the full-scale cleaning. 19 figs

  12. Understanding Solvent Manipulation of Morphology in Bulk-Heterojunction Organic Solar Cells.

    Science.gov (United States)

    Chen, Yuxia; Zhan, Chuanlang; Yao, Jiannian

    2016-10-06

    Film morphology greatly influences the performance of bulk-heterojunction (BHJ)-structure-based solar cells. It is known that an interpenetrating bicontinuous network with nanoscale-separated donor and acceptor phases for charge transfer, an ordered molecular packing for exciton diffusion and charge transport, and a vertical compositionally graded structure for charge collection are prerequisites for achieving highly efficient BHJ organic solar cells (OSCs). Therefore, control of the morphology to obtain an ideal structure is a key problem. For this solution-processing BHJ system, the solvent participates fully in film processing. Its involvement is critical in modifying the nanostructure of BHJ films. In this review, we discuss the effects of solvent-related methods on the morphology of BHJ films, including selection of the casting solvent, solvent mixture, solvent vapor annealing, and solvent soaking. On the basis of a discussion on interaction strength and time between solvent and active materials, we believe that the solvent-morphology-performance relationship will be clearer and that solvent selection as a means to manipulate the morphology of BHJ films will be more rational. © 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. CREATING VALUE WITHIN CONSUMPTION CULTURE

    Directory of Open Access Journals (Sweden)

    Daniel Adrian Gârdan

    2016-12-01

    Full Text Available The issue of culture consumption is a particular concern within the modern marketing theory. Culture can be seen as representing a body of knowledge, beliefs, values, attitudes, symbols etc, developed in a certain period of time by a group of individuals, items transmitted with the help of a social learning process to other generations within the group. Thus, the consumption of culture will identify itself with the consumption of any product, service or a combination of them, directly resulted as manifestation of culture, expressions of artistic creativity specific for a certain cultural space. The present paper proposes the analysis of the phenomenon referring to the culture consumption in terms of specific characteristics. The paper reviews the features specific to the modern consumer of culture, the relationship that exists between the individuals’ level of education and the culture consumption and value creation process or augmentation of the intrinsic value of an artistic product as a result of the contribution that the culture consumer can bring himself. The authors highlight the fact that within extremely complex processes which are defining the culture consumption, consumers can assume an active role, becoming on their turn co-participants in the cultural goods and services value creation and transmission. The modern consumer benefits more than ever from the advantages offered by the information technology, being called to respond to major challenges of the postmodernism paradigm in terms of culture consumption. Globalization and other social economic and politic phenomena have profoundly changed the reports between individual and culture, between self and other members of the society, causing synthesis and essential transformations of culture consumption, of culture consumers typologies, and not least of the very forms of artistic expression related to cultural goods and services.

  14. Process for hydrogenating coal and coal solvents

    Energy Technology Data Exchange (ETDEWEB)

    Shridharani, K.G.; Tarrer, A.R.

    1983-02-15

    A novel process is described for the hydrogenation of coal by the hydrogenation of a solvent for the coal in which the hydrogenation of the coal solvent is conducted in the presence of a solvent hydrogenation catalyst of increased activity, wherein the hydrogenation catalyst is produced by reacting ferric oxide with hydrogen sulfide at a temperature range of 260/sup 0/ C to 315/sup 0/ C in an inert atmosphere to produce an iron sulfide hydrogenation catalyst for the solvent. Optimally, the reaction temperature is 275/sup 0/ C. Alternately, the reaction can be conducted in a hydrogen atmosphere at 350/sup 0/ C.

  15. Process for hydrogenating coal and coal solvents

    Science.gov (United States)

    Tarrer, Arthur R.; Shridharani, Ketan G.

    1983-01-01

    A novel process is described for the hydrogenation of coal by the hydrogenation of a solvent for the coal in which the hydrogenation of the coal solvent is conducted in the presence of a solvent hydrogenation catalyst of increased activity, wherein the hydrogenation catalyst is produced by reacting ferric oxide with hydrogen sulfide at a temperature range of 260.degree. C. to 315.degree. C. in an inert atmosphere to produce an iron sulfide hydrogenation catalyst for the solvent. Optimally, the reaction temperature is 275.degree. C. Alternately, the reaction can be conducted in a hydrogen atmosphere at 350.degree. C.

  16. Aminosilicone solvent recovery methods and systems

    Science.gov (United States)

    Spiry, Irina Pavlovna; Perry, Robert James; Wood, Benjamin Rue; Singh, Surinder Prabhjot; Farnum, Rachel Lizabeth; Genovese, Sarah Elizabeth

    2018-02-13

    The present invention is directed to aminosilicone solvent recovery methods and systems. The methods and systems disclosed herein may be used to recover aminosilicone solvent from a carbon dioxide containing vapor stream, for example, a vapor stream that leaves an aminosilicone solvent desorber apparatus. The methods and systems of the invention utilize a first condensation process at a temperature from about 80.degree. C. to about 150.degree. C. and a second condensation process at a temperature from about 5.degree. C. to about 75.degree. C. The first condensation process yields recovered aminosilicone solvent. The second condensation process yields water.

  17. Molecular Thermodynamic Modeling of Mixed Solvent Solubility

    DEFF Research Database (Denmark)

    Ellegaard, Martin Dela; Abildskov, Jens; O’Connell, John P.

    2010-01-01

    A method based on statistical mechanical fluctuation solution theory for composition derivatives of activity coefficients is employed for estimating dilute solubilities of 11 solid pharmaceutical solutes in nearly 70 mixed aqueous and nonaqueous solvent systems. The solvent mixtures range from...... nearly ideal to strongly nonideal. The database covers a temperature range from 293 to 323 K. Comparisons with available data and other existing solubility methods show that the method successfully describes a variety of observed mixed solvent solubility behaviors using solute−solvent parameters from...

  18. El efecto del precio del tabaco sobre el consumo: un análisis de datos agregados para México The effect of tobacco prices on consumption: a time series data analysis for Mexico

    Directory of Open Access Journals (Sweden)

    Rosa Itandehui Olivera-Chávez

    2010-01-01

    Full Text Available Objetivo. Estimar la elasticidad precio de la demanda de cigarros en México con base en fuentes de información y metodología distintas a las utilizadas en estudios previos sobre el tema. Material y métodos. Se utilizaron series trimestrales de consumo, ingreso y precio para el periodo de 1994 a 2005. Se estimó un modelo de demanda de largo plazo mediante mínimos cuadrados ordinarios (MCO y se investigó la existencia de una relación de cointegración. Además, se estimó un modelo mediante mínimos cuadrados ordinarios dinámicos (MCOD para corregir posibles problemas de endogeneidad de las variables independientes y autocorrelación de los residuales. Resultados. Las estimaciones mediante MCOD mostraron que un incremento del precio de los cigarros de 10% podría reducir el consumo en 2.5% (pObjective. To estimate the price elasticity of the demand for cigarettes in Mexico based on data sources and a methodology different from the ones used in previous studies on the topic. Material and Methods. Quarterly time series of consumption, income and price for the time period 1994 to 2005 were used. A long-run demand model was estimated using Ordinary Least Squares (OLS and the existence of a cointegration relationship was investigated. Also, a model using Dinamic Ordinary Least Squares (DOLS was estimated to correct for potential endogeneity of independent variables and autocorrelation of the residuals. Results. DOLS estimates showed that a 10% increase in cigarette prices could reduce consumption in 2.5% (p<0.05 and increase government revenue in 16.11%. Conclusions. The results confirmed the effectiveness of taxes as an instrument for tobacco control in Mexico. An increase in taxes can be used to increase cigarette prices and therefore to reduce consumption and increase government revenue.

  19. Energy Consumption Database

    Science.gov (United States)

    Consumption Database The California Energy Commission has created this on-line database for informal reporting ) classifications. The database also provides easy downloading of energy consumption data into Microsoft Excel (XLSX

  20. Solvent extraction for remediation of manufactured gas plant sites

    International Nuclear Information System (INIS)

    Luthy, R.G.; Dzombak, D.A.; Peters, C.; Ali, M.A.; Roy, S.B.

    1992-12-01

    This report presents the results of an initial assessment of the feasibility of solvent extraction for removing coal tar from the subsurface or for treating contaminated soil excavated at manufactured gas plant (MGP) sites. In situ solvent extraction would involve injection, recovery, and reclamation for reinjection of an environmentally-benign, water-miscible solvent. Accelerated dissolution and removal of coaltar from the subsurface might be desirable as a remedial approach if excavation is not practical (e.g., the site underlies facilities in current use), direct pumping of coal tar is ineffective, and bioremediation is not feasible because of the presence of high concentrations of coal tar. Both laboratory experiments and engineering evaluations were performed to provide a basis for the initial feasibility assessment. Laboratory work included identification and evaluation of promising solvents, measurement of fundamental properties of coal tar-solvent-water systems, and measurement of rates of dissolution of coal tar in porous media into flowing solvent-water solutions. Engineering evaluations involved identification of common hydrogeologic features and contaminant distributions at MGP sites, and identification and evaluation of possible injection-recovery well deployment schemes. A coupled flow-chemistry model was developed for simulation of the in situ process and evaluation of the well deployment schemes. Results indicate that in situsolvent extraction may be able to recover a significant amount of coal tar from the subsurface within a reasonable time frame (on the order of one year or so) provided that subsurface conditions are conducive to process implementation. Some important implementation issues remain to be addressed

  1. Comparison of microwave hydrodistillation and solvent-free microwave extraction of essential oil from Melaleuca leucadendra Linn

    Science.gov (United States)

    Ismanto, A. W.; Kusuma, H. S.; Mahfud, M.

    2017-12-01

    The comparison of solvent-free microwave extraction (SFME) and microwave hydrodistillation (MHD) in the extraction of essential oil from Melaleuca leucadendra Linn. was examined. Dry cajuput leaves were used in this study. The purpose of this study is also to determine optimal condition (microwave power). The relative electric consumption of SFME and MHD methods are both showing 0,1627 kWh/g and 0,3279 kWh/g. The results showed that solvent-free microwave extraction methods able to reduce energy consumption and can be regarded as a green technique for extraction of cajuput oil.

  2. Solvent anode for plutonium purification

    International Nuclear Information System (INIS)

    Bowersox, D.F.; Fife, K.W.; Christensen, D.C.

    1986-01-01

    The purpose of this study is to develop a technique to allow complete oxidation of plutonium from the anode during plutonium electrorefining. This will eliminate the generation of a ''spent'' anode heel which requires further treatment for recovery. Our approach is to employ a solvent metal in the anode to provide a liquid anode pool throughout electrorefining. We use molten salts and metals in ceramic crucibles at 700 0 C. Our goal is to produce plutonium metal at 99.9% purity with oxidation and transfer of more than 98% of the impure plutonium feed metal from the anode into the salt and product phases. We have met these criteria in experiments on the 100 to 1000 g scale. We plan to scale our operations to 4 kg of feed plutonium and to optimize the process parameters

  3. Quantitation of buried contamination by use of solvents. [degradation of silicone polymers by amine solvents

    Science.gov (United States)

    Pappas, S. P.; Hsiao, Y. C.; Hill, L. W.

    1973-01-01

    Spore recovery form cured silicone potting compounds using amine solvents to degrade the cured polymers was investigated. A complete list of solvents and a description of the effect of each on two different silicone polymers is provided.

  4. Cleanup of 7.5% tributyl phosphate/n-paraffin solvent-extraction solvent

    International Nuclear Information System (INIS)

    Reif, D.J.

    1987-02-01

    The HM process at the Savannah River Plant uses 7.5% tributyl phosphate in n-paraffin as an extraction solvent. During use, the solvent is altered due to hydrolysis and radiolysis, forming materials which influence product losses, product decontamination, and separation efficiencies. Laboratory studies to improve online solvent cleaning have shown that carbonate washing, although removing residual solvent activity, does not remove binding ligands which hold fission products in the solvent. Treatment of solvent by an alumina adsorption process removes binding ligands and significantly improves recycle solvent performance. Both laboratory work defining a full-scale alumina adsorption process and the use of the process to clean HM process first cycle solvent is discussed

  5. Implicit solvent simulations of DNA and DNA-protein complexes: Agreement with explicit solvent vs experiment

    Czech Academy of Sciences Publication Activity Database

    Chocholoušová, Jana; Feig, M.

    2006-01-01

    Roč. 110, č. 34 (2006), s. 17240-17251 ISSN 1520-6106 Keywords : implicit solvent * explicit solvent * protein DNA complex Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 4.115, year: 2006

  6. Scheduling home-appliances to optimize energy consumption

    DEFF Research Database (Denmark)

    Rossello Busquet, Ana

    In order to optimize the energy consumption, energy demand peaks should be avoided, and energy consumption should be smoothly distributed over time. This can be achieved by setting a maximum energy consumption per user’s household. In other words, the overall consumption of the user’s appliances...

  7. Inconsistent Investment and Consumption Problems

    Energy Technology Data Exchange (ETDEWEB)

    Kronborg, Morten Tolver, E-mail: mtk@atp.dk [ATP (Danish Labour Market Supplementary Pension Scheme) (Denmark); Steffensen, Mogens, E-mail: mogens@math.ku.dk [University of Copenhagen, Department of Mathematical Sciences (Denmark)

    2015-06-15

    In a traditional Black–Scholes market we develop a verification theorem for a general class of investment and consumption problems where the standard dynamic programming principle does not hold. The theorem is an extension of the standard Hamilton–Jacobi–Bellman equation in the form of a system of non-linear differential equations. We derive the optimal investment and consumption strategy for a mean-variance investor without pre-commitment endowed with labor income. In the case of constant risk aversion it turns out that the optimal amount of money to invest in stocks is independent of wealth. The optimal consumption strategy is given as a deterministic bang-bang strategy. In order to have a more realistic model we allow the risk aversion to be time and state dependent. Of special interest is the case were the risk aversion is inversely proportional to present wealth plus the financial value of future labor income net of consumption. Using the verification theorem we give a detailed analysis of this problem. It turns out that the optimal amount of money to invest in stocks is given by a linear function of wealth plus the financial value of future labor income net of consumption. The optimal consumption strategy is again given as a deterministic bang-bang strategy. We also calculate, for a general time and state dependent risk aversion function, the optimal investment and consumption strategy for a mean-standard deviation investor without pre-commitment. In that case, it turns out that it is optimal to take no risk at all.

  8. Inconsistent Investment and Consumption Problems

    International Nuclear Information System (INIS)

    Kronborg, Morten Tolver; Steffensen, Mogens

    2015-01-01

    In a traditional Black–Scholes market we develop a verification theorem for a general class of investment and consumption problems where the standard dynamic programming principle does not hold. The theorem is an extension of the standard Hamilton–Jacobi–Bellman equation in the form of a system of non-linear differential equations. We derive the optimal investment and consumption strategy for a mean-variance investor without pre-commitment endowed with labor income. In the case of constant risk aversion it turns out that the optimal amount of money to invest in stocks is independent of wealth. The optimal consumption strategy is given as a deterministic bang-bang strategy. In order to have a more realistic model we allow the risk aversion to be time and state dependent. Of special interest is the case were the risk aversion is inversely proportional to present wealth plus the financial value of future labor income net of consumption. Using the verification theorem we give a detailed analysis of this problem. It turns out that the optimal amount of money to invest in stocks is given by a linear function of wealth plus the financial value of future labor income net of consumption. The optimal consumption strategy is again given as a deterministic bang-bang strategy. We also calculate, for a general time and state dependent risk aversion function, the optimal investment and consumption strategy for a mean-standard deviation investor without pre-commitment. In that case, it turns out that it is optimal to take no risk at all

  9. Application of semi parametric modelling to times series forecasting: case of the electricity consumption; Modeles semi-parametriques appliques a la prevision des series temporelles. Cas de la consommation d'electricite

    Energy Technology Data Exchange (ETDEWEB)

    Lefieux, V

    2007-10-15

    Reseau de Transport d'Electricite (RTE), in charge of operating the French electric transportation grid, needs an accurate forecast of the power consumption in order to operate it correctly. The forecasts used everyday result from a model combining a nonlinear parametric regression and a SARIMA model. In order to obtain an adaptive forecasting model, nonparametric forecasting methods have already been tested without real success. In particular, it is known that a nonparametric predictor behaves badly with a great number of explanatory variables, what is commonly called the curse of dimensionality. Recently, semi parametric methods which improve the pure nonparametric approach have been proposed to estimate a regression function. Based on the concept of 'dimension reduction', one those methods (called MAVE : Moving Average -conditional- Variance Estimate) can apply to time series. We study empirically its effectiveness to predict the future values of an autoregressive time series. We then adapt this method, from a practical point of view, to forecast power consumption. We propose a partially linear semi parametric model, based on the MAVE method, which allows to take into account simultaneously the autoregressive aspect of the problem and the exogenous variables. The proposed estimation procedure is practically efficient. (author)

  10. Sustainable Consumption Dilemmas

    Directory of Open Access Journals (Sweden)

    Kees Vringer

    2017-06-01

    Full Text Available To examine which considerations play a role when individuals make decisions to purchase sustainable product varieties or not, we have conducted a large scale field experiment with more than 600 participating households. Households can vote on whether the budgets they receive should only be spent on purchasing the sustainable product variety, or whether every household in a group is free to spend their budget on any product variety. By conducting several treatments, we tested whether people tend to view sustainable consumption as a social dilemma or as a moral dilemma. We find little support for the hypothesis that social dilemma considerations are the key drivers of sustainable consumption behaviour. Participants seem to be caught in a moral dilemma in which they not only weigh their individual financial costs with the sustainable benefits but they also consider the consequences of restricting other people’s freedom of choice. Complementary survey results further substantiate this claim and show that many people are reluctant to impose restrictions on their peers, but, at the same time, our results also suggest substantial support for the government to regulate the availability of unsustainable product varieties.

  11. Biodegradation of Chlorinated Solvents: Reactions near DNAPL and Enzyme Function

    Energy Technology Data Exchange (ETDEWEB)

    McCarty, P. L.; Spormann, Alfred M.; Criddle, Craig, S.

    2003-12-11

    three to five times, leading to a more rapid clean-up of the DNAPL zone. The most favored electron donor to add is one which partitions well with the chlorinated solvent or can be concentrated near it. Unfortunately, an ideal electron donor, such as vegetable oil, is difficult to introduce and mix with DNAPL in the ground, doing this properly remains an engineering challenge. Numerical model studies have indicated that several factors may significantly influence the rate and extent of enhancement, including the inhibitory effects of PCE and cDCE, the level of ED concentration, DNAPL configuration, and competition for ED. Such factors need to be considered when contemplating engineered DNAPL bioremediation. Pseudomonas stuzeri KC is an organism that transforms CT to carbon dioxide and chloride without the formation of the hazardous intermediate, chloroform. This is accomplished by production and secretion of a molecule called PDTC. This study was direct ed towards determining how PDTC works. Cu (II) at a ratio of 1:1 Cu to PDTC was found to result in the most rapid CT transformation, confirming that the PDTC-Cu complex is both a reactant and a catalyst in CT transformation. CT degradation requires that the PDTC be in a reduced form, which is generated by contact with cell components. Fe(II) inhibits CT transformation by PDTC. Studies indicated that this inhibition is enhanced by some compound or factor in the supernatant with molecular weight greater than 10,000 Da. We have made progress in determining what this factor might be, but have not yet been able to identify it. In related studies, we found that CT transformation by another organism, Shewanella oneidensis MR1, also involves an excreted factor, but this factor is different from PDTC and results in chloroform transformation as an intermediate. Our studies have indicated that this factor is similar to vitamin K2, and we have also confirmed that vitamin K2 does transform C T into chloroform.

  12. Biodegradation of Chlorinated Solvents: Reactions near DNAPL and Enzyme Function

    International Nuclear Information System (INIS)

    McCarty, P. L.; Spormann, Alfred M.; Criddle, Craig S.

    2003-01-01

    three to five times, leading to a more rapid clean-up of the DNAPL zone. The most favored electron donor to add is one which partitions well with the chlorinated solvent or can be concentrated near it. Unfortunately, an ideal electron donor, such as vegetable oil, is difficult to introduce and mix with DNAPL in the ground, doing this properly remains an engineering challenge. Numerical model studies have indicated that several factors may significantly influence the rate and extent of enhancement, including the inhibitory effects of PCE and cDCE, the level of ED concentration, DNAPL configuration, and competition for ED. Such factors need to be considered when contemplating engineered DNAPL bioremediation. Pseudomonas stuzeri KC is an organism that transforms CT to carbon dioxide and chloride without the formation of the hazardous intermediate, chloroform. This is accomplished by production and secretion of a molecule called PDTC. This study was direct ed towards determining how PDTC works. Cu (II) at a ratio of 1:1 Cu to PDTC was found to result in the most rapid CT transformation, confirming that the PDTC-Cu complex is both a reactant and a catalyst in CT transformation. CT degradation requires that the PDTC be in a reduced form, which is generated by contact with cell components. Fe(II) inhibits CT transformation by PDTC. Studies indicated that this inhibition is enhanced by some compound or factor in the supernatant with molecular weight greater than 10,000 Da. We have made progress in determining what this factor might be, but have not yet been able to identify it. In related studies, we found that CT transformation by another organism, Shewanella oneidensis MR1, also involves an excreted factor, but this factor is different from PDTC and results in chloroform transformation as an intermediate. Our studies have indicated that this factor is similar to vitamin K2, and we have also confirmed that vitamin K2 does transform C T into chloroform

  13. Effect of Recycle Solvent Hydrotreatment on Oil Yield of Direct Coal Liquefaction

    Directory of Open Access Journals (Sweden)

    Shansong Gao

    2015-07-01

    Full Text Available Effects of the recycle solvent hydrotreatment on oil yield of direct coal liquefaction were carried out in the 0.18 t/day direct coal liquefaction bench support unit of National Engineering Laboratory for Direct Coal Liquefaction (China. Results showed that the hydrogen-donating ability of the hydrogenated recycle solvent improved and the hydrogen consumption of solvent hydrotreatment was increased by decreasing liquid hourly space velocity (LHSV from 1.5 to 1.0 h−1 and increasing reaction pressure from 13.7 to 19.0 MPa. The hydrogen-donating ability of the hydrogenated recycle solvent was enhanced, thus promoting the oil yield and coal conversion of the liquefaction reaction. The coal conversion and distillates yield of coal liquefaction were increased from 88.74% to 88.82% and from 47.41% to 49.10%, respectively, with the increase in the solvent hydrotreatment pressure from 13.7 to 19.0 MPa. The coal conversion and distillates of coal liquefaction were increased from 88.82% to 89.27% and from 49.10% to 54.49%, respectively, when the LHSV decreased from 1.5 to 1.0 h−1 under the solvent hydrotreatment pressure of 19.0 MPa.

  14. Screen-based sedentary time: Association with soft drink consumption and the moderating effect of parental education in European children : The ENERGY study

    NARCIS (Netherlands)

    Gebremariam, M.K.; Chinapaw, M.J.; Bringolf-Isler, B.; Bere, E.; Kovacs, E.; Verloigne, M.; Stok, F.M.; Manios, Y.; Brug, J.; Lien, N.

    2017-01-01

    Aim The aim of the present study was to explore if children who spend more time on screen-based sedentary behaviors (i.e.TV viewing and computer use) drink more sugar-sweetened soft drinks. The study also assessed whether these associations were independent of individual and home environmental

  15. Daylight-saving time: Consumption and demand saving and pollutants emission reduction; El cambio de horario de verano: Ahorros en consumo y demanda, y reduccion de contaminantes

    Energy Technology Data Exchange (ETDEWEB)

    Ramos, Gaudencio; Diaz, Rodrigo; Fiscal, Raul; Alquicira, Claudia; Martinez, Serafin; Maqueda, Martin [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1997-12-31

    This paper presents some of the saving obtained in demand and in fuels with the daylight-saving time, as well as the main aspects considered to make an evaluation of it. [Espanol] Se presentan los ahorros obtenidos en consumo, demanda y combustibles con el cambio de horario de verano, asi como los principales aspectos considerados para efectuar la evaluacion de los mismos.

  16. Daylight-saving time: Consumption and demand saving and pollutants emission reduction; El cambio de horario de verano: Ahorros en consumo y demanda, y reduccion de contaminantes

    Energy Technology Data Exchange (ETDEWEB)

    Ramos, Gaudencio; Diaz, Rodrigo; Fiscal, Raul; Alquicira, Claudia; Martinez, Serafin; Maqueda, Martin [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1998-12-31

    This paper presents some of the saving obtained in demand and in fuels with the daylight-saving time, as well as the main aspects considered to make an evaluation of it. [Espanol] Se presentan los ahorros obtenidos en consumo, demanda y combustibles con el cambio de horario de verano, asi como los principales aspectos considerados para efectuar la evaluacion de los mismos.

  17. Reformulation of Maxwell's equations to incorporate near-solute solvent structure.

    Science.gov (United States)

    Yang, Pei-Kun; Lim, Carmay

    2008-09-04

    Maxwell's equations, which treat electromagnetic interactions between macroscopic charged objects in materials, have explained many phenomena and contributed to many applications in our lives. Derived in 1861 when no methods were available to determine the atomic structure of macromolecules, Maxwell's equations assume the solvent to be a structureless continuum. However, near-solute solvent molecules are highly structured, unlike far-solute bulk solvent molecules. Current methods cannot treat both the near-solute solvent structure and time-dependent electromagnetic interactions in a macroscopic system. Here, we derive "microscopic" electrodynamics equations that can treat macroscopic time-dependent electromagnetic field problems like Maxwell's equations and reproduce the solvent molecular and dipole density distributions observed in molecular dynamics simulations. These equations greatly reduce computational expense by not having to include explicit solvent molecules, yet they treat the solvent electrostatic and van der Waals effects more accurately than continuum models. They provide a foundation to study electromagnetic interactions between molecules in a macroscopic system that are ubiquitous in biology, bioelectromagnetism, and nanotechnology. The general strategy presented herein to incorporate the near-solute solvent structure would enable studies on how complex cellular protein-ligand interactions are affected by electromagnetic radiation, which could help to prevent harmful electromagnetic spectra or find potential therapeutic applications.

  18. Rapid determination of caffeine in one drop of beverages and foods using drop-to-drop solvent microextraction with gas chromatography/mass spectrometry.

    Science.gov (United States)

    Shrivas, Kamlesh; Wu, Hui-Fen

    2007-11-02

    A simple and rapid sample cleanup and preconcentration method for the quantitative determination of caffeine in one drop of beverages and foods by gas chromatography/mass spectrometry (GC/MS) has been proposed using drop-to-drop solvent microextraction (DDSME). The best optimum experimental conditions for DDSME were: chloroform as the extraction solvent, 5 min extraction time, 0.5 microL exposure volume of the extraction phase and no salt addition at room temperature. The optimized methodology exhibited good linearity between 0.05 and 5.0 microg/mL with correlation coefficient of 0.980. The relative standard deviation (RSD) and limits of detection (LOD) of the DDSME/GC/MS method were 4.4% and 4.0 ng/mL, respectively. Relative recovery of caffeine in beverages and foods were found to be 96.6-101%, which showing good reliability of this method. This DDSME excludes the major disadvantages of conventional method of caffeine extraction, like large amount of organic solvent and sample consumption and long sample pre-treatment process. So, this approach proves that the DDSME/GC/MS technique can be applied as a simple, fast and feasible diagnosis tool for environmental, food and biological application for extremely small amount of real sample analysis.

  19. Solvent-vapor-assisted imprint lithography

    NARCIS (Netherlands)

    Voicu, Nicoleta E.; Ludwigs, Sabine; Crossland, Edward J. W.; Andrew, Piers; Steiner, Ullrich

    2007-01-01

    Sub-micrometer features are replicated into high-molecular-weight polymer resists by using solvent-assisted nanoimprint lithography (see figure). By swelling the polymer in a controlled solvent-vapor atmosphere, millibar pressures and ambient temperatures are sufficient to achieve high-fidelity

  20. Into the depths of deep eutectic solvents

    NARCIS (Netherlands)

    Rodriguez, N.; Alves da Rocha, M.A.; Kroon, M.C.

    2015-01-01

    Ionic liquids (ILs) have been successfully tested in a wide range of applications; however, their high price and complicated synthesis make them infeasible for large scale implementation. A decade ago, a new generation of solvents so called deep eutectic solvents (DESs) was reported for the first

  1. Remediation of Contaminated Soils by Solvent Flushing

    NARCIS (Netherlands)

    Augustijn, Dionysius C.M.; Jessup, Ron E.; Rao, P. Suresh C.; Wood, A. Lynn

    1994-01-01

    Solvent flushing is a potential technique for remediating a waste disposal/spill site contaminated with organic chemicals. This technique involves the injection of a solvent mixture (e.g., water plus alcohols) that enhances contaminant solubility, reduces the retardation factor, and increases the

  2. Structuring of polymer solutions upon solvent evaporation

    NARCIS (Netherlands)

    Schaefer, C.; van der Schoot, P.|info:eu-repo/dai/nl/102140618; Michels, J. J.

    2015-01-01

    The morphology of solution-cast, phase-separated polymers becomes finer with increasing solvent evaporation rate. We address this observation theoretically for a model polymer where demixing is induced by steady solvent evaporation. In contrast to what is the case for a classical, thermal quench

  3. A 1-h time interval between a meal containing iron and consumption of tea attenuates the inhibitory effects on iron absorption: a controlled trial in a cohort of healthy UK women using a stable iron isotope.

    Science.gov (United States)

    Ahmad Fuzi, Salma F; Koller, Dagmar; Bruggraber, Sylvaine; Pereira, Dora Ia; Dainty, Jack R; Mushtaq, Sohail

    2017-12-01

    Background: Tea has been shown to be a potent inhibitor of nonheme iron absorption, but it remains unclear whether the timing of tea consumption relative to a meal influences iron bioavailability. Objective: The aim of the study was to investigate the effect of a 1-h time interval of tea consumption on nonheme iron absorption in an iron-containing meal in a cohort of iron-replete, nonanemic female subjects with the use of a stable isotope ( 57 Fe). Design: Twelve women (mean ± SD age: 24.8 ± 6.9 y) were administered a standardized porridge meal extrinsically labeled with 4 mg 57 Fe as FeSO 4 on 3 separate occasions, with a 14-d time interval between each test meal (TM). The TM was administered with water (TM-1), with tea administered simultaneously (TM-2), and with tea administered 1 h postmeal (TM-3). Fasted venous blood samples were collected for iron isotopic analysis and measurement of iron status biomarkers. Fractional iron absorption was estimated by the erythrocyte iron incorporation method. Results: Iron absorption was 5.7% ± 8.5% (TM-1), 3.6% ± 4.2% (TM-2), and 5.7% ± 5.4% (TM-3). Mean fractional iron absorption was found to be significantly higher (2.2%) when tea was administered 1 h postmeal (TM-3) than when tea was administered simultaneously with the meal (TM-2) ( P = 0.046). An ∼50% reduction in the inhibitory effect of tea (relative to water) was observed, from 37.2% (TM-2) to 18.1% (TM-3). Conclusions: This study shows that tea consumed simultaneously with an iron-containing porridge meal leads to decreased nonheme iron absorption and that a 1-h time interval between a meal and tea consumption attenuates the inhibitory effect, resulting in increased nonheme iron absorption. These findings are not only important in relation to the management of iron deficiency but should also inform dietary advice, especially that given to those at risk of deficiency. This trial was registered at clinicaltrials.gov as NCT02365103. © 2017 American Society for

  4. Solvent distillations studies for a reprocessing plant

    International Nuclear Information System (INIS)

    Ginisty, C.; Guillaume, B.

    1989-01-01

    The substantial amounts of solvent used in large reprocessing plants are such that considerable care must be paid to solvent management to limit the production of organic wastes. The installation of intensive treatment by chemical regeneration serves to increase the service life of the solvent. General solvent management, combined with a distillation unit under reduced pressure also helps to recycle the two components of the solvent at a low activity level. Distillation also serves to remove the heavy degradation products that are generally responsible for poor hydraulic behavior and for the holdup of radioactive products such as plutonium, zirconium and ruthenium. From the safety standpoint, the flashpoint of the distilled diluent tends to rise. It can therefore be recycled without risk

  5. Method of decomposing radioactive organic solvent wastes

    International Nuclear Information System (INIS)

    Uki, Kazuo; Ichihashi, Toshio; Hasegawa, Akira; Sato, Tatsuaki

    1986-01-01

    Purpose: To decompose radioactive organic solvent wastes or radioactive hydrocarbon solvents separated therefrom into organic materials under moderate conditions, as well as greatly decrease the amount of secondary wastes generated. Method: Radioactive organic solvent wastes comprising an organic phosphoric acid ester ingredient and a hydrocarbon ingredient as a diluent therefor, or radioactive hydrocarbon solvents separated therefrom are oxidatively decomposed by hydrogen peroxide in an aqueous phosphoric acid solution of phosphoric acid metal salts finally into organic materials to perform decomposing treatment for the radioactive organic solvent wastes. The decomposing reaction is carried out under relatively moderate conditions and cause less burden to facilities or the likes. Further, since the decomposed liquid after the treatment can be reused for the decomposing reaction as a catalyst solution secondary wastes can significantly be decreased. (Yoshihara, H.)

  6. [Food consumption patterns among adolescents].

    Science.gov (United States)

    Palenzuela Paniagua, S M; Pérez Milena, A; Pérula de Torres, L A; Fernández García, J A; Maldonado Alconada, J

    2014-01-01

    Adolescence is a critical time for the establishment of healthy eating habits. The objective was to analyze food consumption patterns among adolescents and their relationship with family and social factors. Multicentre observational cross-sectional descriptive study using a food frequency questionnaire for the last week. It was answered anonymously. The adolescent's age/gender, parents' studies/occupation and school's location/type were included. The population sample was composed of 1,095 adolescents in sixth grade at primary schools from an Andalusian region. They were chosen by polietapic random sampling that distinguished between public/private and capital/provincial schools. 1,005 surveys were analyzed. The mean age is 11.45 (SD: 0.59). Fifty-three percent were male. The intake of dairy products (only two-thirds taken daily), pasta, fruit and vegetables (daily consumption of 30%) is deficient. Sixty-four point five percent consume legumes weekly. Fish consumption is equal to meat, with a preference for poultry. More than half consume red meat daily. Olive oil is preferred. The intake of "empty calories" (fast food, candies, soft drink) is high. Through multivariate analysis the existence of clusters of healthy and unhealthy foods, related to the social status of the parents and the type of school, is proved. A healthy diet based on the nutritional pyramid is not the consumption pattern in the adolescents surveyed. There is a low consumption of diary products, legumes, fruits and vegetables. There is a relationship between the social class of the family and consumption patterns (healthy and unhealthy). Health strategies are needed to modify such inappropriate consumption.

  7. Stochastic estimation of electricity consumption

    International Nuclear Information System (INIS)

    Kapetanovic, I.; Konjic, T.; Zahirovic, Z.

    1999-01-01

    Electricity consumption forecasting represents a part of the stable functioning of the power system. It is very important because of rationality and increase of control process efficiency and development planning of all aspects of society. On a scientific basis, forecasting is a possible way to solve problems. Among different models that have been used in the area of forecasting, the stochastic aspect of forecasting as a part of quantitative models takes a very important place in applications. ARIMA models and Kalman filter as stochastic estimators have been treated together for electricity consumption forecasting. Therefore, the main aim of this paper is to present the stochastic forecasting aspect using short time series. (author)

  8. The chemistry of nonaqueous solvents v.4 solution phenomena and aprotic solvents

    CERN Document Server

    Lagowski, J J

    1976-01-01

    The Chemistry of Nonaqueous Solvents, Volume IV: Solution Phenomena and Aprotic Solvents focuses on the chemistry of nonaqueous solvents, with emphasis on solution phenomena and aprotic solvents such as tetramethylurea, inorganic acid chlorides, cyclic carbonates, and sulfolane. This book is organized into seven chapters and begins with an overview of the theory of electrical conductivity and elementary experimental considerations, along with some of the interesting research on nonaqueous solvents. It then turns to a discussion on hydrogen bonding phenomena in nonaqueous systems as probed

  9. PARIS II: Computer Aided Solvent Design for Pollution Prevention

    Science.gov (United States)

    This product is a summary of U.S. EPA researchers' work developing the solvent substitution software tool PARIS II (Program for Assisting the Replacement of Industrial Solvents, version 2.0). PARIS II finds less toxic solvents or solvent mixtures to replace more toxic solvents co...

  10. Time consumption and productivity of a medium size mobile tower yarder in downhill and uphill configurations: a case study in Czech Republic

    Directory of Open Access Journals (Sweden)

    Andrea Rosario Proto

    2016-12-01

    Full Text Available Cable cranes are among the most important means of yarding and transporting timber in many mountainous regions of Europe. In the last decade, all-terrain mobile tower cable cranes have been increasing due to their adaptability to operate both in uphill as well in downhill configuration. This research assesses the efficiency and the costs of a mobile cable crane manufactured in Czech Republic and designed for all-terrain application and specifically mounted on a wheeled agricultural tractor. A total of 100 cycle times were recorded in order to obtain evaluate the performance in the downhill as well uphill extraction configuration. The productivity analysis was based on regression equation as a function lateral distance, skyline slope distance and extracted volume. Increasing in number of lateral distance and extraction distance resulted as significant variables affecting the cycle time. Even if the test highlights a good efficiency of the extraction system for both the configuration (uphill vs downhill there a still many organisational features that could be improved in order to fully exploit the potentiality of the tested cable crane system.

  11. Changing practices of energy consumption

    DEFF Research Database (Denmark)

    Christensen, Toke Haunstrup; Friis, Freja; Skjølsvold, Tomas Moe

    2017-01-01

    to produce hydrogen for transport use), whereas others emphasise the role of individual consumers. The latter approach is dominant within the smart grid vision. In this paper, we explore implications of smart grid technologies in households for the everyday practices related to electricity consumption...... (microgeneration) influence the everyday practices? What kind of influence does the combination of PVs with other “smart” energy technologies have on everyday practices and electricity consumption patterns? A specific focus is on the time patterns of households’ energy consumption. The analysis is based...... settlement scheme (hourly versus annual net metering) and the trial context play a role. Also, the study finds a broader interest in increasing the level of self-sufficiency through combining PVs with home batteries. Finally, the paper discusses a distinct (male) gendering in relation to who is most actively...

  12. Distribution of multi-component solvents in solvent vapor extraction chamber

    Energy Technology Data Exchange (ETDEWEB)

    Das, S. [Society of Petroleum Engineers, Richardson, TX (United States)]|[Marathon Oil Corp., Houston, TX (United States)

    2008-10-15

    Vapex process performance is sensitive to operating pressures, temperatures and the types of solvent used. The hydrocarbon solvents used in Vapex processes typically have between 5 and 10 per cent hydrocarbon impurities, and the accumulation of dense phases inside the vapor chamber reduces gravity drainage potential. This study investigated the partitioning of solvent compounds inside the vapor chamber during in situ Vapex processes.The aim of the study was to examine how the different components of the mixed solvent partitioned inside the extracted chamber during the oil and vapor phase. A 2-D homogenous reservoir model was used to simulate the Vapex process with a solvent mixture comprised of propane and methane at various percentages. The effect of injecting a hot solvent vapor was also investigated. The study showed that injected methane accumulated at both the top and the extraction interface. Accumulations near the top had a positive impact on solvent confinement in thin reservoirs. Diffusion of the solvent component was controlled by gas phase molecular diffusion, and was much faster than the diffusion of solvent molecules in the liquid phase. The use of hot solvent mixtures slowed the extraction process due to lower solvent solubility in the oil phase. It was concluded that the negative impact on viscosity reduction by dilution was not compensated by rises in temperature. 6 refs., 11 figs.

  13. Porous polymeric membranes with thermal and solvent resistance

    KAUST Repository

    Pulido, Bruno

    2017-05-30

    Polymeric membranes are highly advantageous over their ceramic counterparts in terms of the simplicity of the manufacturing process, cost and scalability. Their main disadvantages are low stability at temperatures above 200 °C, and in organic solvents. We report for the first time porous polymeric membranes manufactured from poly(oxindolebiphenylylene) (POXI), a polymer with thermal stability as high as 500 °C in oxidative conditions. The membranes were prepared by solution casting and phase inversion by immersion in water. The asymmetric porous morphology was characterized by scanning electronic microscopy. The pristine membranes are stable in alcohols, acetone, acetonitrile and hexane, as well as in aqueous solutions with pH between 0 and 14. The membrane stability was extended for application in other organic solvents by crosslinking, using various dibromides, and the efficiency of the different crosslinkers was evaluated by thermogravimetric analysis (TGA) and X-ray photoelectron spectroscopy (XPS). POXI crosslinked membranes are stable up to 329 °C in oxidative conditions and showed organic solvent resistance in polar aprotic solvents with 99% rejection of Red Direct 80 in DMF at 70 °C. With this development, the application of polymeric membranes could be extended to high temperature and harsh environments, fields currently dominated by ceramic membranes.

  14. Synthesis of silver nanocubes in a hydrophobic binary organic solvent.

    Energy Technology Data Exchange (ETDEWEB)

    Peng, S.; Sun, Y. (Center for Nanoscale Materials)

    2010-01-01

    Synthesis of metal nanoparticles with controlled shapes in hydrophobic solvents is challenging because homogeneous nucleation with high rate in these solvents is favorable for the formation of multiply twinned (MT) nanoparticles with spherical morphology. In this work, we report an inhomogeneous nucleation strategy in a binary hydrophobic solvent mediated by dimethyldistearylammonium chloride (DDAC), resulting in the coexistence of single-crystalline Ag polyhedrons and MT Ag quasi-spheres at the beginning of the reaction. In the consequent step, the MT Ag nanoparticles are selectively etched and dissolved through oxidation by NO{sub 3}{sup -} ions (from the Ag precursor, AgNO{sub 3}) with the assistance of Cl{sup -} ions (from DDAC). The dissolved Ag species are then reduced and deposited on the more stable single-crystalline polyhedrons to form Ag nanocubes. Synergy of the oxidative etching of MT particles and growth of single-crystalline particles leads to Ag nanocubes with high purity when the ripening time is long enough. For example, refluxing a mixing solvent of octyl ether and oleylamine containing AgNO{sub 3} (0.02 M) and DDAC (0.03 M) at 260 C for 1 h results in Ag nanocubes with an average edge length of 34 nm and a purity higher than 95%.

  15. Effect of solvent evaporation and coagulation on morphology development of asymmetric membranes

    Science.gov (United States)

    Chandrasekaran, Neelakandan; Kyu, Thein

    2008-03-01

    Miscibility behavior of blends of amorphous polyamide (PA) and polyvinylpyrrolidone (PVP) was studied in relation to membrane formation. Dimethylsulfoxide (DMSO) and water were used as solvent and non-solvent, respectively. Differential scanning calorimetry and cloud point measurements revealed that the binary PA/PVP blends as well as the ternary PA/PVP/DMSO system were completely miscible at all compositions. However, the addition of non-solvent (water) to this ternary system has led to phase separation. Visual turbidity study was used to establish a ternary liquid-liquid phase diagram of the PA-PVP/DMSO/water system. Scanning Electron Microscopy (SEM) showed the development of finger-like and sponge-like cross sectional morphologies during coagulation. Effects of polymer concentration, PA/PVP blend ratio, solvent/non-solvent quality, and evaporation time on the resulting membrane morphology will be discussed.

  16. A novel technique to determine concentration-dependent solvent dispersion in Vapex

    Energy Technology Data Exchange (ETDEWEB)

    Abukhalifeh, H.; Lohi, A.; Upreti, S. R. [Department of Chemical Engineering, Ryerson University, 350 Victoria Street, Toronto, Ontario, M5B 2K3 (Canada)

    2009-07-01

    Vapex (vapor extraction of heavy oil and bitumen) is a promising recovery technology because it consumes low energy, and is very environmentally-friendly. The dispersion of solvents into heavy oil and bitumen is a crucial transport property governing Vapex. The accurate determination of solvent dispersion in Vapex is essential to effectively predict the amount and time scale of oil recovery as well to optimize the field operations. In this work, a novel technique is developed to experimentally determine the concentration-dependent dispersion coefficient of a solvent in Vapex process. The principles of variational calculus are utilized in conjunction with a mass transfer model of the experimental Vapex process. A computational algorithm is developed to optimally compute solvent dispersion as a function of its concentration in heavy oil. The developed technique is applied to Vapex utilizing propane as a solvent. The results show that dispersion of propane is a unimodal function of its concentration in bitumen. (author)

  17. A Novel Technique to Determine Concentration-Dependent Solvent Dispersion in Vapex

    Directory of Open Access Journals (Sweden)

    Hadil Abukhalifeh

    2009-10-01

    Full Text Available Vapex (vapor extraction of heavy oil and bitumen is a promising recovery technology because it consumes low energy, and is very environmentally-friendly. The dispersion of solvents into heavy oil and bitumen is a crucial transport property governing Vapex. The accurate determination of solvent dispersion in Vapex is essential to effectively predict the amount and time scale of oil recovery as well to optimize the field operations. In this work, a novel technique is developed to experimentally determine the concentration-dependent dispersion coefficient of a solvent in Vapex process. The principles of variational calculus are utilized in conjunction with a mass transfer model of the experimental Vapex process. A computational algorithm is developed to optimally compute solvent dispersion as a function of its concentration in heavy oil. The developed technique is applied to Vapex utilizing propane as a solvent. The results show that dispersion of propane is a unimodal function of its concentration in bitumen.

  18. Manipulating the Morphology of P3HT–PCBM Bulk Heterojunction Blends with Solvent Vapor Annealing

    KAUST Repository

    Verploegen, Eric; Miller, Chad E.; Schmidt, Kristin; Bao, Zhenan; Toney, Michael F.

    2012-01-01

    Using grazing incidence X-ray scattering, we observe the effects of solvent vapors upon the morphology of poly(3-hexylthiophene)-phenyl-C 61-butyric acid methyl ester (P3HT-PCBM) bulk heterojunction thin film blends in real time; allowing us to observe morphological rearrangements that occur during this process as a function of solvent. We detail the swelling of the P3HT crystallites upon the introduction of solvent and the resulting changes in the P3HT crystallite morphology. We also demonstrate the ability for tetrahydrofuran vapor to induce crystallinity in PCBM domains. Additionally, we measure the nanoscale phase segregated domain size as a function of solvent vapor annealing and correlate this to the changes observed in the crystallite morphology of each component. Finally, we discuss the implications of the morphological changes induced by solvent vapor annealing on the device properties of BHJ solar cells. © 2012 American Chemical Society.

  19. Manipulating the Morphology of P3HT–PCBM Bulk Heterojunction Blends with Solvent Vapor Annealing

    KAUST Repository

    Verploegen, Eric

    2012-10-23

    Using grazing incidence X-ray scattering, we observe the effects of solvent vapors upon the morphology of poly(3-hexylthiophene)-phenyl-C 61-butyric acid methyl ester (P3HT-PCBM) bulk heterojunction thin film blends in real time; allowing us to observe morphological rearrangements that occur during this process as a function of solvent. We detail the swelling of the P3HT crystallites upon the introduction of solvent and the resulting changes in the P3HT crystallite morphology. We also demonstrate the ability for tetrahydrofuran vapor to induce crystallinity in PCBM domains. Additionally, we measure the nanoscale phase segregated domain size as a function of solvent vapor annealing and correlate this to the changes observed in the crystallite morphology of each component. Finally, we discuss the implications of the morphological changes induced by solvent vapor annealing on the device properties of BHJ solar cells. © 2012 American Chemical Society.

  20. The Impact of Curtin University's Activity, Food and Attitudes Program on Physical Activity, Sedentary Time and Fruit, Vegetable and Junk Food Consumption among Overweight and Obese Adolescents: A Waitlist Controlled Trial

    Science.gov (United States)

    Straker, Leon M.; Howie, Erin K.; Smith, Kyla L.; Fenner, Ashley A.; Kerr, Deborah A.; Olds, Tim S.; Abbott, Rebecca A.; Smith, Anne J.

    2014-01-01

    Background To determine the effects of participation in Curtin University's Activity, Food and Attitudes Program (CAFAP), a community-based, family-centered behavioural intervention, on the physical activity, sedentary time, and healthy eating behaviours of overweight and obese adolescents. Methods In this waitlist controlled clinical trial in Western Australia, adolescents (n = 69, 71% female, mean age 14.1 (SD 1.6) years) and parents completed an 8-week intervention followed by 12 months of telephone and text message support. Assessments were completed at baseline, before beginning the intervention, immediately following the intervention, and at 3-, 6-, and 12- months follow-up. The primary outcomes were physical activity and sedentary time assessed by accelerometers and servings of fruit, vegetables and junk food assessed by 3-day food records. Results During the intensive 8-week intervention sedentary time decreased by −5.1 min/day/month (95% CI: −11.0, 0.8) which was significantly greater than the rate of change during the waitlist period (p = .014). Moderate physical activity increased by 1.8 min/day/month (95% CI: −0.04, 3.6) during the intervention period, which was significantly greater than the rate of change during the waitlist period (p = .041). Fruit consumption increased during the intervention period (monthly incidence rate ratio (IRR) 1.3, 95% CI: 1.10, 1.56) and junk food consumption decreased (monthly IRR 0.8, 95% CI: 0.74, 0.94) and these changes were different to those seen during the waitlist period (p = .004 and p = .020 respectively). Conclusions Participating in CAFAP appeared to have a positive influence on the physical activity, sedentary and healthy eating behaviours of overweight and obese adolescents and many of these changes were maintained for one year following the intensive intervention. Trial Registration Australia and New Zealand Clinical Trials Registry ACTRN12611001187932 PMID:25375109

  1. The impact of Curtin University's activity, food and attitudes program on physical activity, sedentary time and fruit, vegetable and junk food consumption among overweight and obese adolescents: a waitlist controlled trial.

    Science.gov (United States)

    Straker, Leon M; Howie, Erin K; Smith, Kyla L; Fenner, Ashley A; Kerr, Deborah A; Olds, Tim S; Abbott, Rebecca A; Smith, Anne J

    2014-01-01

    To determine the effects of participation in Curtin University's Activity, Food and Attitudes Program (CAFAP), a community-based, family-centered behavioural intervention, on the physical activity, sedentary time, and healthy eating behaviours of overweight and obese adolescents. In this waitlist controlled clinical trial in Western Australia, adolescents (n = 69, 71% female, mean age 14.1 (SD 1.6) years) and parents completed an 8-week intervention followed by 12 months of telephone and text message support. Assessments were completed at baseline, before beginning the intervention, immediately following the intervention, and at 3-, 6-, and 12- months follow-up. The primary outcomes were physical activity and sedentary time assessed by accelerometers and servings of fruit, vegetables and junk food assessed by 3-day food records. During the intensive 8-week intervention sedentary time decreased by -5.1 min/day/month (95% CI: -11.0, 0.8) which was significantly greater than the rate of change during the waitlist period (p = .014). Moderate physical activity increased by 1.8 min/day/month (95% CI: -0.04, 3.6) during the intervention period, which was significantly greater than the rate of change during the waitlist period (p = .041). Fruit consumption increased during the intervention period (monthly incidence rate ratio (IRR) 1.3, 95% CI: 1.10, 1.56) and junk food consumption decreased (monthly IRR 0.8, 95% CI: 0.74, 0.94) and these changes were different to those seen during the waitlist period (p = .004 and p = .020 respectively). Participating in CAFAP appeared to have a positive influence on the physical activity, sedentary and healthy eating behaviours of overweight and obese adolescents and many of these changes were maintained for one year following the intensive intervention. Australia and New Zealand Clinical Trials Registry ACTRN12611001187932.

  2. The impact of Curtin University's activity, food and attitudes program on physical activity, sedentary time and fruit, vegetable and junk food consumption among overweight and obese adolescents: a waitlist controlled trial.

    Directory of Open Access Journals (Sweden)

    Leon M Straker

    Full Text Available To determine the effects of participation in Curtin University's Activity, Food and Attitudes Program (CAFAP, a community-based, family-centered behavioural intervention, on the physical activity, sedentary time, and healthy eating behaviours of overweight and obese adolescents.In this waitlist controlled clinical trial in Western Australia, adolescents (n = 69, 71% female, mean age 14.1 (SD 1.6 years and parents completed an 8-week intervention followed by 12 months of telephone and text message support. Assessments were completed at baseline, before beginning the intervention, immediately following the intervention, and at 3-, 6-, and 12- months follow-up. The primary outcomes were physical activity and sedentary time assessed by accelerometers and servings of fruit, vegetables and junk food assessed by 3-day food records.During the intensive 8-week intervention sedentary time decreased by -5.1 min/day/month (95% CI: -11.0, 0.8 which was significantly greater than the rate of change during the waitlist period (p = .014. Moderate physical activity increased by 1.8 min/day/month (95% CI: -0.04, 3.6 during the intervention period, which was significantly greater than the rate of change during the waitlist period (p = .041. Fruit consumption increased during the intervention period (monthly incidence rate ratio (IRR 1.3, 95% CI: 1.10, 1.56 and junk food consumption decreased (monthly IRR 0.8, 95% CI: 0.74, 0.94 and these changes were different to those seen during the waitlist period (p = .004 and p = .020 respectively.Participating in CAFAP appeared to have a positive influence on the physical activity, sedentary and healthy eating behaviours of overweight and obese adolescents and many of these changes were maintained for one year following the intensive intervention.Australia and New Zealand Clinical Trials Registry ACTRN12611001187932.

  3. Statistical evaluation of tablet coating processes: influence of pan design and solvent type

    Directory of Open Access Journals (Sweden)

    Valdomero Pereira de Melo Junior

    2010-12-01

    Full Text Available Partially and fully perforated pan coaters are among the most relevant types of equipment currently used in the process of coating tablets. The goal of this study was to assess the performance differences among these types of equipment employing a factorial design. This statistical approach allowed the simultaneous study of the process variables and verification of interactions among them. The study included partially-perforated and fully-perforated pan coaters, aqueous and organic solvents, as well as hypromellose-based immediate-release coating. The dependent variables were process time, energy consumption, mean weight of tablets and process yield. For the tests, placebo tablets with a mean weight of 250 mg were produced, divided into eight lots of two kilograms each and coated in duplicate, using both partially perforated pan and fully perforated pan coaters. The results showed a significant difference between the type of equipment used (partially and fully perforated pan coaters with regard to process time and energy consumption, whereas no significant difference was identified for mean weight of the coated tablets and process yield.Entre os tipos de equipamentos de maior relevância utilizados atualmente no processo de revestimento de comprimidos estão os de tambor parcial e totalmente perfurados. A proposta desse trabalho foi avaliar as diferenças de desempenho entre esses equipamentos empregando projeto fatorial. Essa abordagem estatística possibilitou o estudo simultâneo das variáveis do processo, permitindo verificar interações entre elas. O trabalho incluiu equipamento com tambor parcialmente perfurado e totalmente perfurado, solventes aquoso e orgânico, assim como revestimento de liberação imediata à base de hipromelose. As variáveis dependentes ou respostas foram tempo de processo, consumo de energia, peso médio e rendimento do processo. Para os ensaios, foram produzidos comprimidos de placebo de 250 mg de peso m

  4. Photonic crystal based sensor for organic solvents and for solvent-water mixtures.

    Science.gov (United States)

    Fenzl, Christoph; Hirsch, Thomas; Wolfbeis, Otto S

    2012-12-12

    Monodisperse polystyrene nanoparticles with a diameter of 173 nm were incorporated into a polydimethylsiloxane matrix where they display an iridescent color that can be attributed to the photonic crystal effect. The film is of violet color if placed in plain water, but turns to red in the presence of the non-polar solvent n-hexane. Several solvents were studied in some detail. We show that such films are capable of monitoring the water content of ethanol/water mixtures, where only 1% (v/v) of water leads to a shift of the peak wavelength of reflected light by 5 nm. The method also can be applied to determine, both visually and instrumentally, the fraction of methanol in ethanol/methanol mixtures. Here, a fraction of 1% of methanol (v/v) results in a wavelength shift of 2 nm. The reflected wavelength is not influenced by temperature changes nor impeded by photobleaching. The signal changes are fully reversible and response times are <1 s.

  5. Photonic Crystal Based Sensor for Organic Solvents and for Solvent-Water Mixtures

    Directory of Open Access Journals (Sweden)

    Otto S. Wolfbeis

    2012-12-01

    Full Text Available Monodisperse polystyrene nanoparticles with a diameter of 173 nm were incorporated into a polydimethylsiloxane matrix where they display an iridescent color that can be attributed to the photonic crystal effect. The film is of violet color if placed in plain water, but turns to red in the presence of the non-polar solvent n-hexane. Several solvents were studied in some detail. We show that such films are capable of monitoring the water content of ethanol/water mixtures, where only 1% (v/v of water leads to a shift of the peak wavelength of reflected light by 5 nm. The method also can be applied to determine, both visually and instrumentally, the fraction of methanol in ethanol/methanol mixtures. Here, a fraction of 1% of methanol (v/v results in a wavelength shift of 2 nm. The reflected wavelength is not influenced by temperature changes nor impeded by photobleaching. The signal changes are fully reversible and response times are <1 s.

  6. Renal effects of chronic exposure to organic solvents. A clinical controlled trial

    Energy Technology Data Exchange (ETDEWEB)

    Krusell, L.; Nielsen, H.K.; Baelum, J.; Lundqvist, G.; Omland, O.; Vaeth, M.; Husted, S.E.; Mogensen, C.E.; Geday, E.

    1985-01-01

    Chronic effects of organic solvents on renal function were measured by creatinine clearances and urinary excretion rates of beta 2-microglobulin and albumin. Forty-three male printing trade workers occupationally exposed to different organic solvents for 9-25 years were compared with 43 age-matched male controls. No differences were found either in creatinine clearances or average basal levels of beta 2-microglobulin and albumin excretion rates, whereas a positive relation could be demonstrated between alcohol consumption on the day before the trial and urinary excretion rate of albumin. This investigation did not reveal any adverse renal effects of moderate chronic exposure to organic solvents in a group of active trade workers.

  7. Renal effects of chronic exposure to organic solvents. A clinical controlled trial

    DEFF Research Database (Denmark)

    Krusell, Lars Romer; Nielsen, H K; Bælum, Jesper

    1985-01-01

    Chronic effects of organic solvents on renal function were measured by creatinine clearances and urinary excretion rates of beta 2-microglobulin and albumin. Forty-three male printing trade workers occupationally exposed to different organic solvents for 9-25 years were compared with 43 age......-matched male controls. No differences were found either in creatinine clearances or average basal levels of beta 2-microglobulin and albumin excretion rates, whereas a positive relation could be demonstrated between alcohol consumption on the day before the trial and urinary excretion rate of albumin....... This investigation did not reveal any adverse renal effects of moderate chronic exposure to organic solvents in a group of active trade workers....

  8. Microwave-assisted silica-promoted solvent-free synthesis of ...

    Indian Academy of Sciences (India)

    method using microwave irradiation with an excellent yield. The newly ... Table 1. Silica promoted microwave-assisted solvent-free synthesis of quinazolinone ... Time (min). Yield (%)a ..... thanks SC/ST cell of Bangalore University for research.

  9. Non-random mating and convergence over time for alcohol consumption, smoking, and exercise: the Nord-Trøndelag Health Study.

    Science.gov (United States)

    Ask, Helga; Rognmo, Kamilla; Torvik, Fartein Ask; Røysamb, Espen; Tambs, Kristian

    2012-05-01

    Spouses tend to have similar lifestyles. We explored the degree to which spouse similarity in alcohol use, smoking, and physical exercise is caused by non-random mating or convergence. We used data collected for the Nord-Trøndelag Health Study from 1984 to 1986 and prospective registry information about when and with whom people entered marriage/cohabitation between 1970 and 2000. Our sample included 19,599 married/cohabitating couples and 1,551 future couples that were to marry/cohabitate in the 14-16 years following data collection. All couples were grouped according to the duration between data collection and entering into marriage/cohabitation. Age-adjusted polychoric spouse correlations were used as the dependent variables in non-linear segmented regression analysis; the independent variable was time. The results indicate that spouse concordance in lifestyle is due to both non-random mating and convergence. Non-random mating appeared to be strongest for smoking. Convergence in alcohol use and smoking was evident during the period prior to marriage/cohabitation, whereas convergence in exercise was evident throughout life. Reduced spouse similarity in smoking with relationship duration may reflect secular trends.

  10. Alcohol consumption and liver cirrhosis mortality

    DEFF Research Database (Denmark)

    Bentzen, Jan Børsen; Smith, Valdemar

    Since the 1960s wine consumption has decreased dramatically in especially the Southern European countries whereas the countries in the northern parts of Europe have experienced a substitution from beer and spirits toward wines. In this sense there has been a process of convergence taking place...... regarding per capita consumption of wine among the European countries. Also for the total consumption of alcohol, i.e. the per capita consumption of beer, wine and spirits, the hypothesis of convergence seems to hold. In the same time span the number of alcohol related diseases as e.g. liver diseases, have...... changed significantly in the same direction as the developments in alcohol consumption. The changes in the consumption levels of alcohol in general -- and wine in particular -- are influenced by many factors of which health arguments may have played a crucial role. The alcohol policies of the European...

  11. Organic Solvent Tolerant Lipases and Applications

    Directory of Open Access Journals (Sweden)

    Shivika Sharma

    2014-01-01

    Full Text Available Lipases are a group of enzymes naturally endowed with the property of performing reactions in aqueous as well as organic solvents. The esterification reactions using lipase(s could be performed in water-restricted organic media as organic solvent(s not only improve(s the solubility of substrate and reactant in reaction mixture but also permit(s the reaction in the reverse direction, and often it is easy to recover the product in organic phase in two-phase equilibrium systems. The use of organic solvent tolerant lipase in organic media has exhibited many advantages: increased activity and stability, regiospecificity and stereoselectivity, higher solubility of substrate, ease of products recovery, and ability to shift the reaction equilibrium toward synthetic direction. Therefore the search for organic solvent tolerant enzymes has been an extensive area of research. A variety of fatty acid esters are now being produced commercially using immobilized lipase in nonaqueous solvents. This review describes the organic tolerance and industrial application of lipases. The main emphasis is to study the nature of organic solvent tolerant lipases. Also, the potential industrial applications that make lipases the biocatalysts of choice for the present and future have been presented.

  12. Hydrothermal liquefaction of de-oiled Jatropha curcas cake using Deep Eutectic Solvents (DESs) as catalysts and co-solvents.

    Science.gov (United States)

    Alhassan, Yahaya; Kumar, Naveen; Bugaje, Idris M

    2016-01-01

    Biomass liquefaction using ionic liquids (ILs) as catalysts has received appreciable attention, in renewable fuels and chemicals production, recently. However, issues associated with the production cost, long reaction time and use of volatile solvents are undeniably challenging. Thus, Deep Eutectic Solvents (DESs) emerged as promising and potential ILs substitutes. The hydrothermal liquefaction of de-oiled Jatropha curcas cake was catalyzed by four synthesized DESs as catalysts and co-solvents for selective extraction. Proximate and ultimate analyses including ash, moisture and carbon contents of bio-crude produced varied slightly. The higher heating values found ranges from 21.15 ± 0.82 MJ/kg to 24.30 ± 0.98 MJ/kg. The bio-crude yields obtained using ChCl-KOH DES was 43.53 wt% and ChCl-p-TsOH DES was 38.31 wt%. Bio-crude yield using ChCl-FeCl3 DES was 30.80 wt%. It is suggested that, the selectivity of bio-crude could be improved, by using DESs as catalyst and co-solvent in HTL of biomass such as de-oiled J. curcas cake. Copyright © 2015 Elsevier Ltd. All rights reserved.

  13. Adolescents in the United States can identify familiar foods at the time of consumption and when prompted with an image 14 h postprandial, but poorly estimate portions.

    Science.gov (United States)

    Schap, TusaRebecca E; Six, Bethany L; Delp, Edward J; Ebert, David S; Kerr, Deborah A; Boushey, Carol J

    2011-07-01

    To evaluate adolescents' abilities to identify foods and estimate the portion size of foods consumed in order to inform development of the mobile telephone food record (mpFR). Data were collected from two samples of adolescents (11-18 years). Adolescents in sample 1 participated in one lunch (n 63) and fifty-five of the sixty-three adolescents (87 %) returned for breakfast the next morning. Sample 2 volunteers received all meals and snacks for a 24 h period. At mealtime, sample 1 participants were asked to write down the names of the foods. Sample 2 participants identified foods in an image of their meal 10-14 h postprandial. Adolescents in sample 2 also estimated portion sizes of their breakfast foods and snacks. Sample 1 identified thirty of the thirty-eight food items correctly, and of the misidentified foods all were identified within the correct major food group. For sample 2, eleven of the thirteen food items were identified correctly 100 % of the time. Half of the breakfast and snack foods had at least one portion size estimate within 10 % of the true amount using a variety of measurement descriptors. The results provide evidence that adolescents can correctly identify familiar foods and they can look at an image of their meal and identify the foods in the image up to 14·5 h postprandial. The results of the present study not only inform the development of the mpFR but also provide strong evidence of the use of digital images of eating occasions in research and clinical settings.

  14. [birthweight And Caffeine Consumption].

    OpenAIRE

    Bicalho, Gladys Gripp; Barros Filho, Antônio de Azevedo

    2015-01-01

    To assess the association between maternal caffeine consumption during pregnancy and low birth weight, prematurity and intrauterine growth retardation. A case-control was carried out and 354 newborns of single labor with birthweight 3,000 g (controls) were analyzed. Caffeine consumption was calculated based on daily consumption of coffee, soft drinks and tea. Results were adjusted using multiple logistic regression for the following confounders: mother's age, schooling, income, marital status...

  15. Alcohol Consumption in Students

    OpenAIRE

    Tran, Cathy

    2010-01-01

    Drinking behaviour among university students is a serious public health concern. Reasons for drinking are complex and many factors contribute to this behaviour. Previous research has established links between personality factors and alcohol consumption and also between metacognitions and alcohol consumption. Few studies have looked into how personality traits and metacognitions interact. This study investigated the relationships between personality, metacognitions and alcohol consumption in a...

  16. Next Generation Solvent - Materials Compatibility With Polymer Components Within Modular Caustic-Side Solvent Extraction Unit (Final Report)

    International Nuclear Information System (INIS)

    Fondeur, F.; Peters, T.; Fink, S.

    2012-01-01

    The Office of Waste Processing, within the Office of Technology Innovation and Development, is funding the development of an enhanced solvent for deployment at the Savannah River Site for removal of cesium from High Level Waste. The technical effort is collaboration between Oak Ridge National Laboratory (ORNL), Savannah River National Laboratory (SRNL), and Argonne National Laboratory. The first deployment target for the technology is within the Modular Caustic-Side Solvent Extraction Unit (MCU). Deployment of a new chemical within an existing facility requires verification that the chemical components are compatible with the installed equipment. In the instance of a new organic solvent, the primary focus is on compatibility of the solvent with organic polymers used in the facility. This report provides the data from exposing these polymers to the Next Generation Solvent (NGS). The test was conducted over six months. An assessment of the dimensional stability of polymers present in MCU (i.e., PEEK, Grafoil, Tefzel and Isolast) in the modified NGS (where the concentration of LIX(reg s ign)79 and MaxCalix was varied systematically) showed that LIX(reg s ign)79 selectively affected Tefzel and its different grades (by an increase in size and lowering its density). The copolymer structure of Tefzel and possibly its porosity allows for the easier diffusion of LIX(reg s ign)79. Tefzel is used as the seat material in some of the valves at MCU. Long term exposure to LIX(reg s ign)79, may make the valves hard to operate over time due to the seat material (Tefzel) increasing in size. However, since the physical changes of Tefzel in the improved solvent are comparable to the changes in the CSSX baseline solvent, no design changes are needed with respect to the Tefzel seating material. PEEK, Grafoil and Isolast were not affected by LIX(reg s ign)79 and MaxCalix within six months of exposure. The initial rapid weight gain observed in every polymer is assigned to the finite and

  17. NEXT GENERATION SOLVENT-MATERIALS COMPATIBILITY WITH POLYMER COMPONENTS WITHIN MODULAR CAUSTIC-SIDE SOLVENT EXTRACTION UNIT (FINAL REPORT)

    Energy Technology Data Exchange (ETDEWEB)

    Fondeur, F.; Peters, T.; Fink, S.

    2012-01-17

    The Office of Waste Processing, within the Office of Technology Innovation and Development, is funding the development of an enhanced solvent for deployment at the Savannah River Site for removal of cesium from High Level Waste. The technical effort is collaboration between Oak Ridge National Laboratory (ORNL), Savannah River National Laboratory (SRNL), and Argonne National Laboratory. The first deployment target for the technology is within the Modular Caustic-Side Solvent Extraction Unit (MCU). Deployment of a new chemical within an existing facility requires verification that the chemical components are compatible with the installed equipment. In the instance of a new organic solvent, the primary focus is on compatibility of the solvent with organic polymers used in the facility. This report provides the data from exposing these polymers to the Next Generation Solvent (NGS). The test was conducted over six months. An assessment of the dimensional stability of polymers present in MCU (i.e., PEEK, Grafoil, Tefzel and Isolast) in the modified NGS (where the concentration of LIX{reg_sign}79 and MaxCalix was varied systematically) showed that LIX{reg_sign}79 selectively affected Tefzel and its different grades (by an increase in size and lowering its density). The copolymer structure of Tefzel and possibly its porosity allows for the easier diffusion of LIX{reg_sign}79. Tefzel is used as the seat material in some of the valves at MCU. Long term exposure to LIX{reg_sign}79, may make the valves hard to operate over time due to the seat material (Tefzel) increasing in size. However, since the physical changes of Tefzel in the improved solvent are comparable to the changes in the CSSX baseline solvent, no design changes are needed with respect to the Tefzel seating material. PEEK, Grafoil and Isolast were not affected by LIX{reg_sign}79 and MaxCalix within six months of exposure. The initial rapid weight gain observed in every polymer is assigned to the finite and

  18. Driven polymer translocation in good and bad solvent: Effects of hydrodynamics and tension propagation.

    Science.gov (United States)

    Moisio, J E; Piili, J; Linna, R P

    2016-08-01

    We investigate the driven polymer translocation through a nanometer-scale pore in the presence and absence of hydrodynamics both in good and bad solvent. We present our results on tension propagating along the polymer segment on the cis side that is measured for the first time using our method that works also in the presence of hydrodynamics. For simulations we use stochastic rotation dynamics, also called multiparticle collision dynamics. We find that in the good solvent the tension propagates very similarly whether hydrodynamics is included or not. Only the tensed segment is by a constant factor shorter in the presence of hydrodynamics. The shorter tensed segment and the hydrodynamic interactions contribute to a smaller friction for the translocating polymer when hydrodynamics is included, which shows as smaller waiting times and a smaller exponent in the scaling of the translocation time with the polymer length. In the bad solvent hydrodynamics has a minimal effect on polymer translocation, in contrast to the good solvent, where it speeds up translocation. We find that under bad-solvent conditions tension does not spread appreciably along the polymer. Consequently, translocation time does not scale with the polymer length. By measuring the effective friction in a setup where a polymer in free solvent is pulled by a constant force at the end, we find that hydrodynamics does speed up collective polymer motion in the bad solvent even more effectively than in the good solvent. However, hydrodynamics has a negligible effect on the motion of individual monomers within the highly correlated globular conformation on the cis side and hence on the entire driven translocation under bad-solvent conditions.

  19. Solvent Handbook Database System user's manual

    International Nuclear Information System (INIS)

    1993-03-01

    Industrial solvents and cleaners are used in maintenance facilities to remove wax, grease, oil, carbon, machining fluids, solder fluxes, mold release, and various other contaminants from parts, and to prepare the surface of various metals. However, because of growing environmental and worker-safety concerns, government regulations have already excluded the use of some chemicals and have restricted the use of halogenated hydrocarbons because they affect the ozone layer and may cause cancer. The Solvent Handbook Database System lets you view information on solvents and cleaners, including test results on cleaning performance, air emissions, recycling and recovery, corrosion, and non-metals compatibility. Company and product safety information is also available

  20. Modeling of Salt Solubilities in Mixed Solvents

    DEFF Research Database (Denmark)

    Chiavone-Filho, O.; Rasmussen, Peter

    2000-01-01

    A method to correlate and predict salt solubilities in mixed solvents using a UNIQUAC+Debye-Huckel model is developed. The UNIQUAC equation is applied in a form with temperature-dependent parameters. The Debye-Huckel model is extended to mixed solvents by properly evaluating the dielectric...... constants and the liquid densities of the solvent media. To normalize the activity coefficients, the symmetric convention is adopted. Thermochemical properties of the salt are used to estimate the solubility product. It is shown that the proposed procedure can describe with good accuracy a series of salt...

  1. Solvent extraction in the nuclear fuel cycle

    International Nuclear Information System (INIS)

    Eccles, H.; Naylor, A.

    1987-01-01

    Solvent extraction techniques have been used in the uranium nuclear fuel cycle in three main areas; concentration of uranium from ore leach liquor, purification of ore concentrates and fuel reprocessing. Solvent extraction has been extended to the removal of transuranic elements from active waste liquor, the recovery of uranium from natural sources and the recovery of noble metals from active waste liquor. Schemes are presented for solvent extraction of uranium using the Amex or Dapex process; spent fuel reprocessing and the Purex process. Recent and future developments of the techniques are outlined. (UK)

  2. Chemical reactions in solvents and melts

    CERN Document Server

    Charlot, G

    1969-01-01

    Chemical Reactions in Solvents and Melts discusses the use of organic and inorganic compounds as well as of melts as solvents. This book examines the applications in organic and inorganic chemistry as well as in electrochemistry. Organized into two parts encompassing 15 chapters, this book begins with an overview of the general properties and the different types of reactions, including acid-base reactions, complex formation reactions, and oxidation-reduction reactions. This text then describes the properties of inert and active solvents. Other chapters consider the proton transfer reactions in

  3. Spreadsheet algorithm for stagewise solvent extraction

    International Nuclear Information System (INIS)

    Leonard, R.A.; Regalbuto, M.C.

    1994-01-01

    The material balance and equilibrium equations for solvent extraction processes have been combined with computer spreadsheets in a new way so that models for very complex multicomponent multistage operations can be setup and used easily. A part of the novelty is the way in which the problem is organized in the spreadsheet. In addition, to facilitate spreadsheet setup, a new calculational procedure has been developed. The resulting Spreadsheet Algorithm for Stagewise Solvent Extraction (SASSE) can be used with either IBM or Macintosh personal computers as a simple yet powerful tool for analyzing solvent extraction flowsheets. 22 refs., 4 figs., 2 tabs

  4. State Energy Data Report, 1991: Consumption estimates

    International Nuclear Information System (INIS)

    1993-05-01

    The State Energy Data Report (SEDR) provides annual time series estimates of State-level energy consumption by major economic sector. The estimates are developed in the State Energy Data System (SEDS), which is maintained and operated by the Energy Information Administration (EIA). The goal in maintaining SEDS is to create historical time series of energy consumption by State that are defined as consistently as possible over time and across sectors. SEDS exists for two principal reasons: (1) to provide State energy consumption estimates to the Government, policy makers, and the public; and (2) to provide the historical series necessary for EIA's energy models

  5. State energy data report 1993: Consumption estimates

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    The State Energy Data Report (SEDR) provides annual time series estimates of State-level energy consumption by major economic sector. The estimates are developed in the State Energy Data System (SEDS), which is maintained and operated by the Energy Information Administration (EIA). The goal in maintaining SEDS is to create historical time series of energy consumption by State that are defined as consistently as possible over time and across sectors. SEDS exists for two principal reasons: (1) to provide State energy consumption estimates to Members of Congress, Federal and State agencies, and the general public; and (2) to provide the historical series necessary for EIA`s energy models.

  6. Uranium refining by solvent extraction

    International Nuclear Information System (INIS)

    Kraikaew, J.; Srinuttrakul, W.

    2014-01-01

    The solvent extraction process to produce higher purity uranium from yellowcake was studied in laboratory scale. Yellowcake, which the uranium purity is around 70% and the main impurity is thorium, was obtained from monazite processing pilot plant of Rare Earth Research and Development Center in Thailand. For uranium re-extraction process, the extractant chosen was Tributylphosphate (TBP) in kerosene. It was found that the optimum concentration of TBP was 10% in kerosene and the optimum nitric acid concentration in uranyl nitrate feed solution was 4 N. An increase in concentrations of uranium and thorium in feed solution resulted in a decrease in the distribution of both components in the extractant. However, the distribution of uranium into the extractant was found to be more than that of thorium. The equilibration study of the extraction system, UO_2(NO_3)/4N HNO_3 – 10%TBP/Kerosene, was also investigated. Two extraction stages were calculated graphically from 100,000 ppm uranium concentration in feed solution input with 90% extraction efficiency and the flow ratio of aqueous phase to organic phase was adjusted to 1.0. For thorium impurity scrubbing process, 10% TBP in kerosene was loaded with uranium and minor thorium from uranyl nitrate solution prepared from yellowcake and was scrubbed with different low concentration nitric acid. The results showed that at nitric acid normality was lower than 1 N, uranium distributed well to aqueous phase. As conclusion, optimum nitric acid concentration for scrubbing process should not less than 1 N and diluted nitric acid or de-ionized water should be applied to strip uranium from organic phase in the final refining process. (author)

  7. Energy consumption and the use of thermal insulating materials. A comparative analysis on the tendencies over the time; Consumo de energia y uso de aislamientos termicos - un analisis comparativo de tendencias en el tiempo

    Energy Technology Data Exchange (ETDEWEB)

    Ordonez C, Luis Felipe [Aislantes Minerales, S. A. de C. V. Mexico, D. F. (Mexico)

    1994-12-31

    Through the observations and comparisons conducted on the behavior of change tendencies of population growth, Gross Internal Product and energy consumption, one can analyze if the energy saving tendencies in Mexico are positive and similar to the tendencies in the consumption of thermal insulating materials and similar to other countries figures. The analysis of these figures allows US to detect if the energy saving efforts can be correlated with the consumption of thermal insulating materials and with the standard of living of a country (determined by its per capita income) and establish a future performance index of energy conservation for the adequate utilization o insulating materials of economical thickness. The index proposed in this paper serves this purpose and yields interesting results. Along recent years and as a result of the industrialization level and way of living in Mexico, the energy consumption has increased in a higher rate than the population growth, based on 1980 figures. In this same period, the gross internal product per capita has also increased in a slightly lower rate to the population growth. This means that the figure for Energy Intensity, defined as the rate of energy consumption over the gross internal product, has slightly increased in the same period accounted for, meaning that the country has become more inefficient in recent years. At the same time, the production capacity of thermal insulating materials has remained constant since 1980 until early 1994. This compares unfavorably with all the developed countries, in which the energy intensity has diminished considerably in the last years, while the thermal insulating materials rate has augmented at a rhythm of similar proportions. [Espanol] A base de realizar observaciones y comparaciones del comportamiento de las tendencias de cambio en crecimiento poblacional, Producto Interno Bruto y consumo de energia, se puede analizar si las tendencias de ahorro de energia en Mexico son

  8. Green Michael addition of thiols to electron deficient alkenes using KF/alumina and recyclable solvent or solvent-free conditions

    Energy Technology Data Exchange (ETDEWEB)

    Lenardao, Eder J.; Trecha, Danusia O.; Ferreira, Patricia da C.; Jacob, Raquel G.; Perin, Gelson [Universidade Federal de Pelotas (UFPEL), Pelotas, RS (Brazil). Inst. de Quimica e Geociencias. Lab. de Sintese Organica Limpa (LASOL)]. E-mail: lenardao@ufpel.edu.br

    2009-07-01

    A general, clean and easy method for the conjugated addition of thiols to citral promoted by KF/Al{sub 2}O{sub 3} under solvent-free or using glycerin as recyclable solvent at room temperature is described. It was found that the solvent-free protocol is applicable to the direct reaction of thiophenol with the essential oil of lemon grass (Cymbopogon citratus) to afford directly 3,7-dimethyl-3-(phenylthio)oct-6-enal, a potential bactericide agent. The method was extended to other electron-poor alkenes with excellent results. For the solvent-free protocol, the use of microwave irradiation facilitated the procedure and accelerates the reaction. The catalytic system and glycerin can be reused up to three times without previous treatment with comparable activity. (author)

  9. SCENARIOS EVALUATION TOOL FOR CHLORINATED SOLVENT MNA

    Energy Technology Data Exchange (ETDEWEB)

    Vangelas, K; Brian02 Looney, B; Michael J. Truex; Charles J. Newell

    2006-08-16

    Over the past three decades, much progress has been made in the remediation of chlorinated solvents from the subsurface. Yet these pervasive contaminants continue to present a significant challenge to the U.S. Department of Energy (DOE), other federal agencies, and other public and private organizations. The physical and chemical properties of chlorinated solvents make it difficult to rapidly reach the low concentrations typically set as regulatory limits. These technical challenges often result in high costs and long remediation time frames. In 2003, the DOE through the Office of Environmental Management funded a science-based technical project that uses the U.S. Environmental Protection Agency's technical protocol (EPA, 1998) and directives (EPA, 1999) on Monitored Natural Attenuation (MNA) as the foundation on which to introduce supporting concepts and new scientific developments that will support remediation of chlorinated solvents based on natural attenuation processes. This project supports the direction in which many site owners want to move to complete the remediation of their site(s), that being to complete the active treatment portion of the remedial effort and transition into MNA. The overarching objective of the effort was to examine environmental remedies that are based on natural processes--remedies such as Monitored Natural Attenuation (MNA) or Enhanced Attenuation (EA). The research program did identify several specific opportunities for advances based on: (1) mass balance as the central framework for attenuation based remedies, (2) scientific advancements and achievements during the past ten years, (3) regulatory and policy development and real-world experience using MNA, and (4) exploration of various ideas for integrating attenuation remedies into a systematic set of ''combined remedies'' for contaminated sites. These opportunities are summarized herein and are addressed in more detail in referenced project documents and

  10. Highly efficient secondary dewatering of dewatered sewage sludge using low boiling point solvents.

    Science.gov (United States)

    He, Chao; Chena, Chia-Lung; Xu, Zhirong; Wang, Jing-Yuan

    2014-01-01

    Secondary dewatering of dewatered sludge is imperative to make conventional drying and incineration of sludge more economically feasible. In this study, a secondary dewatering of dewatered sludge with selected solvents (i.e. acetone and ethanol) followed by vacuum filtration and nature drying was investigated to achieve in-depth dewatering. After the entire secondary dewatering process, the sludge was shown to be odourless and the organic matter content was greatly retained. Increased mean particle size of sludge after solvent contact improved solid-liquid separation. With an acetone/sludge ratio of 3:1 (mL:g) in solvent contact and subsequent nature drying at ambient temperature after 24 h, the moisture content of sludge can be reduced to a level less than 20%. It is found that the polysaccharides were mainly precipitated by acetone, whereas the release ratios of protein and DNA were increased significantly as the added acetone volumes were elevated. During nature drying, accumulated evaporation rates of the sludge after solvent contact were 5-6 times higher than original dewatered sludge. Furthermore, sludge after acetone contact had better nature drying performance than ethanol. The two-stage dewatering involves solvent contact dewatering and solvent enhanced evaporation dewatering. Through selecting an appropriate solvent/sludge ratio as well as economical solvents and minimizing the solvent loss in a closed-pilot system, this dewatering process can be competitive in industrial applications. Therefore, this solvent-aided secondary dewatering is an energy-saving technology for effective in-depth dewatering of dewatered sludge and subsequent sludge utilization.

  11. [Chemical hazards when working with solvent glues].

    Science.gov (United States)

    Domański, Wojciech; Makles, Zbigniew

    2012-01-01

    Solvent glues are used in a wide variety of industries, e.g., textile, footwear and rubber. The problem of workers' exposure to solvent vapors is rarely tackled within the area of occupational safety and health in small and medium-sized enterprises. In order to assess exposure to solvents, organic solvents emitted by glues were identified in the samples of workplace air. The concentration of acetone, benzene, cyclohexane, ethylbenzene, n-hexane, methylcyclohexane, butyl acetate and toluene were determined. The obtained results evidenced the presence of cyclohexane, ethylbenzene, ethylcyclohexane, heptane, n-hexane, o-xylene, methylcyclohexane, methylcyclopentane, butyl acetate and toluene in workplace air. The concentration of those compounds in workplace air was low, usually below 0.15 of MAC. At some workstations the presence of benzene was also observed. Occupational risk was assessed at workstations where gluing took place. It showed that the risk at those workstations was medium or low.

  12. Organic solvents from sugar cane molasses

    Energy Technology Data Exchange (ETDEWEB)

    Oeser, H

    1970-01-01

    The production of organic solvents by fermentation of low priced cane molasses is discussed. Processes described and illustrated in detail include the production of acetone, butanol, ethanol, acetic acid, ethyl acetate and butyl acetate.

  13. Solvent induced supramolecular anisotropy in molecular gels

    Energy Technology Data Exchange (ETDEWEB)

    Rogers, Michael A., E-mail: mroger09@uoguelph.ca [Department of Food Science, University of Guelph, Guelph, Ontario, N3C3X9 (Canada); Corradini, Maria G. [Department of Food Science, University of Massachusetts Amherst, Amherst, MA, 01003 (United States); Emge, Thomas [Department of Chemistry and Biochemistry, Rutgers University, New Brunswick, NJ, 08901 (United States)

    2017-06-15

    Herein is the first report of solvent induced anisotropy in 12-hydroxystearic acid self-assembled fibrillar networks. Increasing the chain length of polar solvent, such as nitriles and ketones, tailored the anisotropy of the fibrillar aggregates. 12HSA molecular gels, comprised of alkanes, exhibited an isotropic fibrillar network irrespective of the alkane chain length. In polar solvents, anisotropy, observed using 2D powder x-ray diffraction profiles, is correlated to a fibrillar supramolecular morphologies in long chain nitriles and ketones while sphereulitic crystals are correlated to x-ray diffraction patterns with an isotropic scatter intensity in short chain ketones and nitriles. These changes directly modify the final physical properties of the gels. - Highlights: • 12-HSA self-assembles into crystalline supramolecular morphologies depending on the solvent. • Alkanes, short chain nitriles and ketones led to 12-HSA displaying supramolecular isotropy. • In long chain nitriles and ketones, 12-HSA displays supramolecular anisotropy.

  14. Solvent induced supramolecular anisotropy in molecular gels

    International Nuclear Information System (INIS)

    Rogers, Michael A.; Corradini, Maria G.; Emge, Thomas

    2017-01-01

    Herein is the first report of solvent induced anisotropy in 12-hydroxystearic acid self-assembled fibrillar networks. Increasing the chain length of polar solvent, such as nitriles and ketones, tailored the anisotropy of the fibrillar aggregates. 12HSA molecular gels, comprised of alkanes, exhibited an isotropic fibrillar network irrespective of the alkane chain length. In polar solvents, anisotropy, observed using 2D powder x-ray diffraction profiles, is correlated to a fibrillar supramolecular morphologies in long chain nitriles and ketones while sphereulitic crystals are correlated to x-ray diffraction patterns with an isotropic scatter intensity in short chain ketones and nitriles. These changes directly modify the final physical properties of the gels. - Highlights: • 12-HSA self-assembles into crystalline supramolecular morphologies depending on the solvent. • Alkanes, short chain nitriles and ketones led to 12-HSA displaying supramolecular isotropy. • In long chain nitriles and ketones, 12-HSA displays supramolecular anisotropy.

  15. Full scale solvent extraction remedial results

    International Nuclear Information System (INIS)

    Cash, A.B.

    1992-01-01

    Sevenson Extraction Technology, Inc. has completed the development of the Soil Restoration Unit (initially developed by Terra-Kleen Corporation), a mobile, totally enclosed solvent extraction treatment facility for the removal of organic contaminated media is greater by a closed loop, counter current process that recycles all solvents. The solvents used are selected for the individual site dependant upon the contaminants, such as PCB's, oil, etc. and the soil conditions. A mixture of up to fourteen non-toxic solvents can be used for complicated sites. The full scale unit has been used to treat one superfund site, the Traband Site in Tulsa, Oklahoma, and is currently treating another superfund site, the Pinette's Salvage Yard Site in Washburn, Maine. The full scale Soil Restoration Unit has also been used at a non-superfund site, as part of a TSCA Research and Development permit. The results from these sites will be discussed in brief herein, and in more detail in the full paper

  16. Enantioselective solvent-free Robinson annulation reactions

    Indian Academy of Sciences (India)

    Unknown

    solvents to effect an asymmetric synthesis is an important step forward towards ... In continuation of our preliminary communication 2, we wish to ..... formation of chiral enamine 74 from the reaction of S-proline with pro-R carbonyl group.

  17. STUDIES ON SOLVENT EXTRACTION OF FREE HYDROGEN ...

    African Journals Online (AJOL)

    synthesized through glucose degradation (glycolysis) to lactic acid. ... g sample into a well stoppered plastic bottle and mixed with 20 mL of distilled .... Recovery of used solvent is necessary because methylchloroform is toxic to the bacteria.

  18. Green and Bio-Based Solvents.

    Science.gov (United States)

    Calvo-Flores, Francisco G; Monteagudo-Arrebola, María José; Dobado, José A; Isac-García, Joaquín

    2018-04-24

    Chemical reactions and many of the procedures of separation and purification employed in industry, research or chemistry teaching utilize solvents massively. In the last decades, with the birth of Green Chemistry, concerns about the employment of solvents and the effects on human health, as well as its environmental impacts and its dependence on non-renewable raw materials for manufacturing most of them, has drawn the attention of the scientific community. In this work, we review the concept of green solvent and the properties and characteristics to be considered green. Additionally, we discuss the different possible routes to prepare many solvents from biomass, as an alternative way to those methods currently applied in the petrochemical industry.

  19. Activity coefficients of solutes in binary solvents

    International Nuclear Information System (INIS)

    Gokcen, N.A.

    1982-01-01

    The activity coefficients in dilute ternary systems are discussed in detail by using the Margules equations. Analyses of some relevant data at high temperatures show that the sparingly dissolved solutes in binary solvents follow complex behavior even when the binary solvents are very nearly ideal. It is shown that the activity data on the solute or the binary system cannot permit computation of the remaining activities except for the regular solutions. It is also shown that a fourth-order equation is usually adequate in expressing the activity coefficient of a solute in binary solvents at high temperatures. When the activity data for a binary solvent are difficult to obtain in a certain range of composition, the activity data for a sparingly dissolved solute can be used to supplement determination of the binary activities

  20. Crystal Nucleation of Tolbutamide in Solution: Relationship to Solvent, Solute Conformation, and Solution Structure.

    Science.gov (United States)

    Zeglinski, Jacek; Kuhs, Manuel; Khamar, Dikshitkumar; Hegarty, Avril C; Devi, Renuka K; Rasmuson, Åke C

    2018-04-03

    The influence of the solvent in nucleation of tolbutamide, a medium-sized, flexible and polymorphic organic molecule, has been explored by measuring nucleation induction times, estimating solvent-solute interaction enthalpies using molecular modelling and calorimetric data, probing interactions and clustering with spectroscopy, and modelling solvent-dependence of molecular conformation in solution. The nucleation driving force required to reach the same induction time is strongly solvent-dependent, increasing in the order: acetonitrilenucleation difficulty is a function of the strength of solvent-solute interaction, with emphasis on the interaction with specific H-bonding polar sites of importance in the crystal structure. A clear exception from this rule is the most difficult nucleation in toluene despite the weakest solvent-solute interactions. However molecular dynamics modelling predicts that tolbutamide assumes an intramolecularly H-bonded conformation in toluene, substantially different from and more stable than the conformation in the crystal structure, and thus presenting an additional barrier to nucleation. This explains why nucleation in toluene is the most difficult and why the relatively higher propensity for aggregation of tolbutamide molecules in toluene solution, as observed with FTIR spectroscopy, does not translate into easier nucleation. Thus, our combined experimental and molecular modelling study suggests that the solvent can influence on the nucleation not only via differences in the desolvation but also through the influence on molecular conformation. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Consumption and the Consumer

    Directory of Open Access Journals (Sweden)

    Maria VADUVA

    2016-09-01

    Full Text Available The consumer is that trader responsible for consumption act of some final goods or services who decided what must be produce and in what cantity, being the one who make the economic mechanism to move. Consumption is in close connection with the production of goods and services, exerting an active role, any activity should be complete by consuming its results; consumption creates the motivation to achieve economic and non-economic activities. The traditional approach to consumer behavior starts from hypothesised that all consumers seek to maximize the aggregate utility obtained of satisfactions resulting from consumption of goods taking into account the budgetary constraints given by income that consumer has and the prices of these goods. In the conditions of modern economy, consumption can be increased by diseconomies. If consumption depends on permanent income, revenue growth effectively does not exert influence on consumption only to the extent that this increase of income leads to increasing permanent income consumer. Consumption is viewed as an active agent of economic life, it is not only a consumer of goods and services but also a producer.

  2. Experience and Sustainable Consumption

    DEFF Research Database (Denmark)

    Rasmussen, Tove Arendt

    consumption may re-enchant ordinary consumption and thereby even become a part of marketing and the experience economy. New layers of meaning are at stake and altruistic motives come into play; doing something good for someone or something, aside from oneself, is a very strong trigger of positive emotions...

  3. Experience and Sustainable Consumption

    DEFF Research Database (Denmark)

    Rasmussen, Tove Arendt

    2014-01-01

    consumption may re-enchant ordinary consumption and thereby even become a part of marketing and the experience economy. New layers of meaning are at stake and altruistic motives come into play; doing something good for someone or something, aside from oneself, is a very strong trigger of positive emotions...

  4. Value Creation and Consumption

    DEFF Research Database (Denmark)

    Taillard, Marie; Voyer, Benjamin; Glaveanu, Vlad Petre

    2014-01-01

    An effect of the digital economy has been to provide consumers with almost unlimited ways to customize their consumption activities. They can craft each consumption experience to fit specific contexts, needs, emotions and other factors. A teenager’s night out is documented and shared with her...

  5. Preliminary test results of a flight management algorithm for fuel conservative descents in a time based metered traffic environment. [flight tests of an algorithm to minimize fuel consumption of aircraft based on flight time

    Science.gov (United States)

    Knox, C. E.; Cannon, D. G.

    1979-01-01

    A flight management algorithm designed to improve the accuracy of delivering the airplane fuel efficiently to a metering fix at a time designated by air traffic control is discussed. The algorithm provides a 3-D path with time control (4-D) for a test B 737 airplane to make an idle thrust, clean configured descent to arrive at the metering fix at a predetermined time, altitude, and airspeed. The descent path is calculated for a constant Mach/airspeed schedule from linear approximations of airplane performance with considerations given for gross weight, wind, and nonstandard pressure and temperature effects. The flight management descent algorithms and the results of the flight tests are discussed.

  6. An overview of industrial solvent use or is there life after chlorinated solvents?

    International Nuclear Information System (INIS)

    Green, B.

    1991-01-01

    Everyone using industrial chemicals has been affected by the fire- storm of new regulations governing solvent use. How will companies currently using hazardous solvents prepare for the changes ahead? What will the impact be on commonly used industrial solvents? What effect are environmental pressures having on solvent use and disposal? Are the responsible individuals in your company up-to-date on phase-out schedules? This paper is written for an audience of compliance coordinators, consultants, production engineers and corporate management. In it, the either addresses the above questions and discusses the specific products affected. The author reviews currently available alternatives to chlorinated and hazardous solvents and introduces a simple system for rating alternatives. The program also includes a discussion of solvent minimization programs and worker reeducation

  7. Occupational exposure to solvents and bladder cancer

    DEFF Research Database (Denmark)

    Hadkhale, Kishor; Martinsen, Jan Ivar; Weiderpass, Elisabete

    2017-01-01

    logistic regression model was used to estimate hazard ratios (HR) and their 95% confidence intervals (95% CI). Increased risks were observed for trichloroethylene (HR 1.23, 95% 95% CI 1.12-1.40), toluene (HR 1.20, 95% CI 1.00-1.38), benzene (HR 1.16, 95% CI 1.04-1.31), aromatic hydrocarbon solvents (HR 1...... of occupational exposure to trichloroethylene, perchloroethylene, aromatic hydrocarbon solvents, benzene and toluene and the risk of bladder cancer....

  8. Computer-Aided Solvent Screening for Biocatalysis

    DEFF Research Database (Denmark)

    Abildskov, Jens; Leeuwen, M.B. van; Boeriu, C.G.

    2013-01-01

    constrained properties related to chemical reaction equilibrium, substrate and product solubility, water solubility, boiling points, toxicity and others. Two examples are provided, covering the screening of solvents for lipase-catalyzed transesterification of octanol and inulin with vinyl laurate....... Esterification of acrylic acid with octanol is also addressed. Solvents are screened and candidates identified, confirming existing experimental results. Although the examples involve lipases, the method is quite general, so there seems to be no preclusion against application to other biocatalysts....

  9. Hazardous Solvent Substitution Data System reference manual

    International Nuclear Information System (INIS)

    Branham-Haar, K.A.; Twitchell, K.E.

    1993-07-01

    Concern for the environment, in addition to Federal regulation, mandate the replacement of hazardous solvents with safer cleaning agents. Manufacturers are working to produce these replacement solvents. As these products are developed, potential users need to be informed of their availability. To promote the use of these new products instead of traditional solvents, the Idaho National Engineering Laboratory (INEL) has developed the Hazardous Solvent Substitution Data System (HSSDS). The HSSDS provides a comprehensive system of information on alternatives to hazardous solvents and related subjects, and it makes that information available to solvent users, industrial hygienists, and process engineers. The HSSDS uses TOPIC reg-sign, a text retrieval system produced by Verity, Inc., to allow a user to search for information on a particular subject. TOPIC reg-sign produces a listing of the retrieved documents and allows the use to examine the documents individually and to use the information contained in them. This reference manual does not replace the comprehensive TOPIC reg-sign user documentation (available from Verity, Inc.), or the HSSDS Tutorial (available from the INEL). The purpose of this reference manual is to provide enough instruction on TOPIC reg-sign so the user may begin accessing the data contained in the HSSDS

  10. Caustic-Side Solvent Extraction: Chemical and Physical Properties of the Optimized Solvent

    Energy Technology Data Exchange (ETDEWEB)

    Delmau, L.H.

    2002-10-08

    This work was undertaken to optimize the solvent used in the Caustic Side Solvent Extraction (CSSX) process and to measure key chemical and physical properties related to its performance in the removal of cesium from the alkaline high-level salt waste stored in tanks at the Savannah River Site. The need to adjust the solvent composition arose from the prior discovery that the previous baseline solvent was supersaturated with respect to the calixarene extractant. The following solvent-component concentrations in Isopar{reg_sign} L diluent are recommended: 0.007 M calix[4]arene-bis(tert-octylbenzo-crown-6) (BOBCalixC6) extractant, 0.75 M 1-(2,2,3,3-tetrafluoropropoxy)-3-(4-sec-butylphenoxy)-2-propanol (Cs-7SB) phase modifier, and 0.003 M tri-n-octylamine (TOA) stripping aid. Criteria for this selection included BOBCalixC6 solubility, batch cesium distribution ratios (D{sub Cs}), calculated flowsheet robustness, third-phase formation, coalescence rate (dispersion numbers), and solvent density. Although minor compromises within acceptable limits were made in flowsheet robustness and solvent density, significant benefits were gained in lower risk of third-phase formation and lower solvent cost. Data are also reported for the optimized solvent regarding the temperature dependence of D{sub Cs} in extraction, scrubbing, and stripping (ESS); ESS performance on recycle; partitioning of BOBCalixC6, Cs-7SB, and TOA to aqueous process solutions; partitioning of organic anions; distribution of metals; solvent phase separation at low temperatures; solvent stability to elevated temperatures; and solvent density and viscosity. Overall, the technical risk of the CSSX process has been reduced by resolving previously identified issues and raising no new issues.

  11. Solvent effect on the rate and equilibrium of reaction between 10-phenylphenoxarsine and methyl iodide

    International Nuclear Information System (INIS)

    Gavrilov, V.I.; Gumerov, N.S.; Rakhmatullin, R.R.

    1990-01-01

    Effect of solvent nature on nucleophilic capacity of three-coordinated arsenic and the equilibrium state of 10-phenylphenoxarsine (PA) reaction with methyl iodide are studied. Kinetic investigations are carried out by the conductometry at 24,35,45 deg C. It is established that quaternization of PA with methyl iodide when substituting a solvent (ketone for alcohol) increases 3-14 times with simultaneous growth of the activation energy value. When transforming from aprotic solvents to protic ones PA interaction equilibrium with methyl iodide shifts to the side of arsonic salt formation

  12. Effect of various solvents on the viscosity-average molecular weight of poly (vinyl acetate)

    International Nuclear Information System (INIS)

    Rehman, W.U.; But, M.A.; Chughtai, A.; Jamil, T.; Sattar, A.

    2006-01-01

    Solution polymerization of Vinyl Acetate was carried out in various solvents (benzene, toluene, ethyl acetate, acetonitrile). Dilute solution viscometry was used to determine the viscosity-average molecular weight of the resulting Poly (Vinyl Acetate) (PV Ac) in each case. The viscosity-average molecular weight (M,J of PVAc was found to increase in the order benzene < toluene < ethyl acetate < acetonitrile, It was concluded that under the same reaction conditions (polymerization time, initiator quantity, solvent/monomer ratio, temperature), acetonitrile served as the best solvent for solution. polymerization of Vinyl Acetate monomer. (author)

  13. Production of graphene by exfoliation of graphite in a volatile organic solvent

    International Nuclear Information System (INIS)

    Choi, Eun-Young; Choi, Won San; Lee, Young Boo; Noh, Yong-Young

    2011-01-01

    The production of unfunctionalized and nonoxidized graphene by exfoliation of graphite in a volatile solvent, 1-propanol, is reported. A stable homogeneous dispersion of graphene was obtained by mild sonication of graphite powder and subsequent centrifugation. The presence of a graphene monolayer was observed by atomic force microscopy and transmission electron microscopy. The solvent, 1-propanol, from the deposited dispersion was simply and quickly removed by air drying at room temperature, without the help of high temperature annealing or vacuum drying, which shortens production time and does not leave any residue of the solvent in the graphene sheets.

  14. Application of Solvent-In-Pulp Technique for Uranium Extraction from Mineralization Granite

    International Nuclear Information System (INIS)

    Ali, M.M.; Hussein, A.E.M.; Youseif, W.M.; El Didamony, A.M.

    2017-01-01

    Investigations on uranium extraction from a representative mineralized granite sample (Gattar granite GII) by solvent-in-pulp (SIP) technique were carried out in the present study. For this purpose, the solvent (tri-butyl amine) (TBA) was mixed with the leaching slurry without prior filtration. The influence of various factors affecting the SIP process, such as contact time, solvent concentration, dilution factor, type of surfactant, surfactant/solid ratio were studied. About 91% uranium extraction efficiency was attained by the application of the chosen extraction SIP conditions. Also, about 96% of the loaded uranium could be stripped by using sulfuric acid as an effective stripping agent

  15. Standardization of solvent extraction procedure for determination of uranium in seawater

    International Nuclear Information System (INIS)

    Sukanta Maity; Sahu, S.K.; Pandit, G.G.

    2015-01-01

    Solvent extraction procedure using ammonium pyrolidine dithiocarbamate complexing agent in methyl isobutyl ketone organic phase and acid exchange back-extraction is described for the simultaneous quantitative pre-concentration of uranium in seawater followed by its determination by differential pulse adsorptive stripping voltammetry. Solvent extraction time is optimized for extraction of uranium from seawater. Solvent extraction efficiency for uranium in seawater at different pH was carried out. The method gives a recovery of 98 ± 2 % for 400 mL sample at pH 3.0 ± 0.02, facilitating the rapid and interference free analysis of seawater samples. (author)

  16. Connecting free energy surfaces in implicit and explicit solvent: an efficient method to compute conformational and solvation free energies.

    Science.gov (United States)

    Deng, Nanjie; Zhang, Bin W; Levy, Ronald M

    2015-06-09

    The ability to accurately model solvent effects on free energy surfaces is important for understanding many biophysical processes including protein folding and misfolding, allosteric transitions, and protein–ligand binding. Although all-atom simulations in explicit solvent can provide an accurate model for biomolecules in solution, explicit solvent simulations are hampered by the slow equilibration on rugged landscapes containing multiple basins separated by barriers. In many cases, implicit solvent models can be used to significantly speed up the conformational sampling; however, implicit solvent simulations do not fully capture the effects of a molecular solvent, and this can lead to loss of accuracy in the estimated free energies. Here we introduce a new approach to compute free energy changes in which the molecular details of explicit solvent simulations are retained while also taking advantage of the speed of the implicit solvent simulations. In this approach, the slow equilibration in explicit solvent, due to the long waiting times before barrier crossing, is avoided by using a thermodynamic cycle which connects the free energy basins in implicit solvent and explicit solvent using a localized decoupling scheme. We test this method by computing conformational free energy differences and solvation free energies of the model system alanine dipeptide in water. The free energy changes between basins in explicit solvent calculated using fully explicit solvent paths agree with the corresponding free energy differences obtained using the implicit/explicit thermodynamic cycle to within 0.3 kcal/mol out of ∼3 kcal/mol at only ∼8% of the computational cost. We note that WHAM methods can be used to further improve the efficiency and accuracy of the implicit/explicit thermodynamic cycle.

  17. Prediction of the solubility in lipidic solvent mixture: Investigation of the modeling approach and thermodynamic analysis of solubility.

    Science.gov (United States)

    Patel, Shruti V; Patel, Sarsvatkumar

    2015-09-18

    Self-micro emulsifying drug delivery system (SMEDDS) is one of the methods to improve solubility and bioavailability of poorly soluble drug(s). The knowledge of the solubility of pharmaceuticals in pure lipidic solvents and solvent mixtures is crucial for designing the SMEDDS of poorly soluble drug substances. Since, experiments are very time consuming, a model, which allows for solubility predictions in solvent mixtures based on less experimental data is desirable for efficiency. Solvents employed were Labrafil® M1944CS and Labrasol® as lipidic solvents; Capryol-90®, Capryol-PGMC® and Tween®-80 as surfactants; Transcutol® and PEG-400 as co-solvents. Solubilities of both drugs were determined in single solvent systems at temperature (T) range of 283-333K. In present study, we investigated the applicability of the thermodynamic model to understand the solubility behavior of drugs in the lipiodic solvents. By using the Van't Hoff and general solubility theory, the thermodynamic functions like Gibbs free energy, enthalpy and entropy of solution, mixing and solvation for drug in single and mixed solvents were understood. The thermodynamic parameters were understood in the framework of drug-solvent interaction based on their chemical similarity and dissimilarity. Clotrimazole and Fluconazole were used as active ingredients whose solubility was measured in single solvent as a function of temperature and the data obtained were used to derive mathematical models which can predict solubility in multi-component solvent mixtures. Model dependent parameters for each drug were calculated at each temperature. The experimental solubility data of solute in mixed solvent system were measured experimentally and further correlated with the calculates values obtained from exponent model and log-linear model of Yalkowsky. The good correlation was observed between experimental solubility and predicted solubility. Copyright © 2015 Elsevier B.V. All rights reserved.

  18. Analysis of solvent extracts from coal liquefaction in a flowing solvent reactor

    Energy Technology Data Exchange (ETDEWEB)

    Li, Wen-Ying; Feng, Jie; Xie, Ke-Chang [Key Laboratory of Coal Science and Technology, Taiyuan University of Technology, Ministry of Education and Shanxi Province, No. 79 Yingze West Street, Taiyuan 030024 (China); Kandiyoti, R. [Department of Chemical Engineering and Chemical Technology, Imperial College, University of London, London SW7 2BY (United Kingdom)

    2004-10-15

    Point of Ayr coal has been extracted using three solvents, tetralin, quinoline and 1-methyl-2-pyrrolidinone (NMP) at two temperatures 350 and 450 C, corresponding approximately to before and after the onset of massive covalent bond scission by pyrolysis. The three solvents differ in solvent power and the ability to donate hydrogen atoms to stabilise free radicals produced by pyrolysis of the coal. The extracts were prepared in a flowing solvent reactor to minimise secondary thermal degradation of the primary extracts. Analysis of the pentane-insoluble fractions of the extracts was achieved by size exclusion chromatography, UV-fluorescence spectroscopy in NMP solvent and probe mass. With increasing extraction temperature, the ratio of the amount having big molecular weight to that having small molecular weight in tetralin extracts was increased; the tetralin extract yield increased from 12.8% to 75.9%; in quinoline, increasing extraction temperature did not have an effect on the molecular weight of products but there was a big increase in extract yield. The extracts in NMP showed the enhanced solvent extraction power at both temperatures, with a shift in the ratio of larger molecules to smaller molecules with increasing extraction temperature and with the highest conversion of Point of Ayr coal among these three solvents at both temperatures. Solvent adducts were detected in the tetralin and quinoline extracts by probe mass spectrometry; solvent products were formed from NMP at both temperatures.

  19. Effect of organic solvents on desorption and atomic absorption determination of heavy metal ions after ion exchange concentration

    International Nuclear Information System (INIS)

    Pilipenko, A.T.; Safronova, V.G.; Zakrevskaya, L.V.

    1986-01-01

    The effect of organic solvents (acetone, methylethylketone, dioxane, ethanol) on desorption of Cu, Mn, Co, Cd, Zn, Pb, Ni from cationite KU-23 ion exchange resin and on the detection limits of their atomic absorption determination has been examined. Cobalt and cadmium can be separated quantitatively using desorption by a mixture of HCl and acetone. Addition of an organic solvent results in a higher absorbance, mainly due to a high rate and efficiency of atomization. Acetone has proved to be the best solvent: addition of 60 vol. % of this solvent to the concentrate provides 2 times lower detection limits for the heavy metas in water

  20. Combining Solvent Isotope Effects with Substrate Isotope Effects in Mechanistic Studies of Alcohol and Amine Oxidation by Enzymes*

    Science.gov (United States)

    Fitzpatrick, Paul F.

    2014-01-01

    Oxidation of alcohols and amines is catalyzed by multiple families of flavin-and pyridine nucleotide-dependent enzymes. Measurement of solvent isotope effects provides a unique mechanistic probe of the timing of the cleavage of the OH and NH bonds, necessary information for a complete description of the catalytic mechanism. The inherent ambiguities in interpretation of solvent isotope effects can be significantly decreased if isotope effects arising from isotopically labeled substrates are measured in combination with solvent isotope effects. The application of combined solvent and substrate (mainly deuterium) isotope effects to multiple enzymes is described here to illustrate the range of mechanistic insights that such an approach can provide. PMID:25448013

  1. Bimetallic Nanoparticles in Alternative Solvents for Catalytic Purposes

    Directory of Open Access Journals (Sweden)

    Trung Dang-Bao

    2017-07-01

    Full Text Available Bimetallic nanoparticles represent attractive catalytic systems thanks to the synergy between both partners at the atomic level, mainly induced by electronic effects which in turn are associated with the corresponding structures (alloy, core-shell, hetero-dimer. This type of engineered material can trigger changes in the kinetics of catalyzed processes by variations on the electrophilicity/nucleophilicity of the metal centers involved and also promote cooperative effects to foster organic transformations, including multi-component and multi-step processes. Solvents become a crucial factor in the conception of catalytic processes, not only due to their environmental impact, but also because they can preserve the bimetallic structure during the catalytic reaction and therefore increase the catalyst life-time. In this frame, the present review focuses on the recent works described in the literature concerning the synthesis of bimetallic nanoparticles in non-conventional solvents, i.e., other than common volatile compounds, for catalytic applications.

  2. Deacidification of Soybean Oil Combining Solvent Extraction and Membrane Technology

    Directory of Open Access Journals (Sweden)

    M. L. Fornasero

    2013-01-01

    Full Text Available The aim of this work was to study the removal of free fatty acids (FFAs from soybean oil, combining solvent extraction (liquid-liquid for the separation of FFAs from the oil and membrane technology to recover the solvent through nanofiltration (NF. Degummed soybean oil containing 1.05 ± 0.10% w/w FFAs was deacidified by extraction with ethanol. Results obtained in the experiences of FFAs extraction from oil show that the optimal operating conditions are the following: 1.8 : 1 w : w ethanol/oil ratio, 30 minutes extraction time and high speed of agitation and 30 minutes repose time after extraction at ambient temperature. As a result of these operations two phases are obtained: deacidified oil phase and ethanol phase (containing the FFAs. The oil from the first extraction is subjected to a second extraction under the same conditions, reducing the FFA concentration in oil to 0.09%. Solvent recovery from the ethanol phase is performed using nanofiltration technology with a commercially available polymeric NF membrane (NF-99-HF, Alfa Laval. From the analysis of the results we can conclude that the optimal operating conditions are pressure of 20 bar and temperature of 35°C, allowing better separation performance: permeate flux of 28.3 L/m2·h and FFA retention of 70%.

  3. Bat consumption in Thailand

    Directory of Open Access Journals (Sweden)

    Kanokwan Suwannarong

    2016-01-01

    Full Text Available Background: Human consumption of bats poses an increasing public health threat globally. Communities in which bat guano is mined from caves have extensive exposure to bat excreta, often harvest bats for consumption, and are at risk for bat-borne diseases. Methods: This rapid ethnographic study was conducted in four provinces of Thailand (Ratchaburi, Sakaeo, Nakorn Sawan, and Phitsanulok, where bat guano was mined and sold during the period April–August 2014. The aim of this study was to understand behaviors and risk perceptions associated with bat conservation, exposure to bats and their excreta, and bat consumption. Sixty-seven respondents playing various roles in bat guano mining, packaging, sale, and use as fertilizer participated in the study. Data were collected through interviews and/or focus group discussions. Results: In spite of a bat conservation program dating back to the 1980s, the benefits of conserving bats and the risks associated with bat consumption were not clear and infrequently articulated by study respondents. Discussion: Since bat consumption continues, albeit covertly, the risk of bat-borne diseases remains high. There is an opportunity to reduce the risk of bat-borne diseases in guano-mining communities by strengthening bat conservation efforts and raising awareness of the health risks of bat consumption. Further research is suggested to test behavior change strategies for reducing bat consumption.

  4. Bat consumption in Thailand.

    Science.gov (United States)

    Suwannarong, Kanokwan; Schuler, Sidney

    2016-01-01

    Human consumption of bats poses an increasing public health threat globally. Communities in which bat guano is mined from caves have extensive exposure to bat excreta, often harvest bats for consumption, and are at risk for bat-borne diseases. This rapid ethnographic study was conducted in four provinces of Thailand (Ratchaburi, Sakaeo, Nakorn Sawan, and Phitsanulok), where bat guano was mined and sold during the period April-August 2014. The aim of this study was to understand behaviors and risk perceptions associated with bat conservation, exposure to bats and their excreta, and bat consumption. Sixty-seven respondents playing various roles in bat guano mining, packaging, sale, and use as fertilizer participated in the study. Data were collected through interviews and/or focus group discussions. In spite of a bat conservation program dating back to the 1980s, the benefits of conserving bats and the risks associated with bat consumption were not clear and infrequently articulated by study respondents. Since bat consumption continues, albeit covertly, the risk of bat-borne diseases remains high. There is an opportunity to reduce the risk of bat-borne diseases in guano-mining communities by strengthening bat conservation efforts and raising awareness of the health risks of bat consumption. Further research is suggested to test behavior change strategies for reducing bat consumption.

  5. Laboratory simulations of the mixed solvent extraction recovery of dominate polymers in electronic waste.

    Science.gov (United States)

    Zhao, Yi-Bo; Lv, Xu-Dong; Yang, Wan-Dong; Ni, Hong-Gang

    2017-11-01

    The recovery of four dominant plastics from electronic waste (e-waste) using mixed solvent extraction was studied. The target plastics included polycarbonate (PC), polystyrene (PS), acrylonitrile butadiene styrene (ABS), and styrene acrylonitrile (SAN). The extraction procedure for multi-polymers at room temperature yielded PC, PS, ABS, and SAN in acceptable recovery rates (64%, 86%, 127%, and 143%, respectively, where recovery rate is defined as the mass ratio of the recovered plastic to the added standard polymer). Fourier transform infrared spectroscopy (FTIR) was used to verify the recovered plastics' purity using a similarity analysis. The similarities ranged from 0.98 to 0.99. Another similar process, which was denoted as an alternative method for plastic recovery, was examined as well. Nonetheless, the FTIR results showed degradation may occur over time. Additionally, the recovery cost estimation model of our method was established. The recovery cost estimation indicated that a certain range of proportion of plastics in e-waste, especially with a higher proportion of PC and PS, can achieve a lower cost than virgin polymer product. It also reduced 99.6%, 30.7% and 75.8% of energy consumptions and CO 2 emissions during the recovery of PC, PS and ABS, and reduced the amount of plastic waste disposal via landfill or incineration and associated environmental impacts. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. Deep Eutectic Solvents pretreatment of agro-industrial food waste.

    Science.gov (United States)

    Procentese, Alessandra; Raganati, Francesca; Olivieri, Giuseppe; Russo, Maria Elena; Rehmann, Lars; Marzocchella, Antonio

    2018-01-01

    Waste biomass from agro-food industries are a reliable and readily exploitable resource. From the circular economy point of view, direct residues from these industries exploited for production of fuel/chemicals is a winning issue, because it reduces the environmental/cost impact and improves the eco-sustainability of productions. The present paper reports recent results of deep eutectic solvent (DES) pretreatment on a selected group of the agro-industrial food wastes (AFWs) produced in Europe. In particular, apple residues, potato peels, coffee silverskin, and brewer's spent grains were pretreated with two DESs, (choline chloride-glycerol and choline chloride-ethylene glycol) for fermentable sugar production. Pretreated biomass was enzymatic digested by commercial enzymes to produce fermentable sugars. Operating conditions of the DES pretreatment were changed in wide intervals. The solid to solvent ratio ranged between 1:8 and 1:32, and the temperature between 60 and 150 °C. The DES reaction time was set at 3 h. Optimal operating conditions were: 3 h pretreatment with choline chloride-glycerol at 1:16 biomass to solvent ratio and 115 °C. Moreover, to assess the expected European amount of fermentable sugars from the investigated AFWs, a market analysis was carried out. The overall sugar production was about 217 kt yr -1 , whose main fraction was from the hydrolysis of BSGs pretreated with choline chloride-glycerol DES at the optimal conditions. The reported results boost deep investigation on lignocellulosic biomass using DES. This investigated new class of solvents is easy to prepare, biodegradable and cheaper than ionic liquid. Moreover, they reported good results in terms of sugars' release at mild operating conditions (time, temperature and pressure).

  7. Marriage and Consumption

    DEFF Research Database (Denmark)

    Blow, Laura; Browning, Martin; Ejrnæs, Mette

    We examine theoretically and empirically consumption over the early part of the life-cycle. The main focus is on the transition from being single to living with someone else. Our theoretical model allows for publicness in consumption; uncertainty concerning marriage; differences between lifetime...... incomes for prospective partners and a marriage premium. We develop a two period model to bring out the main features of the impact of marriage on consumption and saving. We then develop a multi-period model that can be taken to the data on expenditures by singles and couples aged between 18 and 30. Our...

  8. DNA damage and cytotoxicity in pathology laboratory technicians exposed to organic solvents

    Directory of Open Access Journals (Sweden)

    TATIANE DE AQUINO

    2016-03-01

    Full Text Available The aim of this study was to evaluate potential DNA damage and cytotoxicity in pathology laboratory technicians exposed to organic solvents, mainly xylene. Peripheral blood and buccal cells samples were collected from 18 technicians occupationally exposed to organic solvents and 11 non-exposed individuals. The technicians were sampled at two moments: Monday and Friday. DNA damage and cytotoxicity were evaluated using the Comet Assay and the Buccal Micronucleus Cytome assay. Fifteen subjects (83.5% of the exposed group to solvents complained about some symptom probably related to contact with vapours of organic solvents. DNA damage in the exposed group to solvents was nearly 2-fold higher on Friday than on Monday, and in both moments the individuals of this group showed higher levels of DNA damage in relation to controls. No statistical difference was detected in buccal cell micronucleus frequency between the laboratory technicians and the control group. However, in the analysis performed on Friday, technicians presented higher frequency (about 3-fold of karyolytic and apoptotic-like cells (karyorrhectic and pyknotic in relation to control group. Considering the damage frequency and the working time, a positive correlation was found in the exposed group to solvents (r=0.468; p=0.05. The results suggest that pathology laboratory workers inappropriately exposed to organic solvents have increased levels of DNA damage.

  9. Oxidative Desulfurization of Gasoline by Ionic Liquids Coupled with Extraction by Organic Solvents

    OpenAIRE

    Abro, Rashid; Gao, Shurong; Chen, Xiaochun; Yu, Guangren; Abdeltawab, Ahmed A.; Al-Deyab, Salem S.

    2016-01-01

    In this work, desulfurization of real fluidized catalytic cracking (FCC) gasoline was investigated in dual steps; first in oxidative desulfurization (ODS) using imidazolium and pyrrolidonium based Brønsted acidic ionic liquids (ILs) as solvent and catalyst and hydrogen peroxide as oxidant. In second step, extractive desulfurization took place using organic solvents of furfural, furfural alcohol and ethylene glycol. Variety of factors such as temperature, time, mass ratio of oil/ILs and regene...

  10. 29 CFR 1915.32 - Toxic cleaning solvents.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Toxic cleaning solvents. 1915.32 Section 1915.32 Labor... Preservation § 1915.32 Toxic cleaning solvents. (a) When toxic solvents are used, the employer shall employ one or more of the following measures to safeguard the health of employees exposed to these solvents. (1...

  11. COMPUTER-AIDED SOLVENT DESIGN FOR POLLUTION PREVENTION: PARIS II

    Science.gov (United States)

    Solvent substitution is an attractive way of elijminating the use of regulated solvents because it usually does not require major chanages in existing processes, equipment or operations. Successful solvent substitution is dependent on finding solvents that are as effective or be...

  12. Microfluidic Extraction of Biomarkers using Water as Solvent

    Science.gov (United States)

    Amashukeli, Xenia; Manohara, Harish; Chattopadhyay, Goutam; Mehdi, Imran

    2009-01-01

    A proposed device, denoted a miniature microfluidic biomarker extractor (mu-EX), would extract trace amounts of chemicals of interest from samples, such as soils and rocks. Traditionally, such extractions are performed on a large scale with hazardous organic solvents; each solvent capable of dissolving only those molecules lying within narrow ranges of specific chemical and physical characteristics that notably include volatility, electric charge, and polarity. In contrast, in the mu-EX, extractions could be performed by use of small amounts (typically between 0.1 and 100 L) of water as a universal solvent. As a rule of thumb, in order to enable solvation and extraction of molecules, it is necessary to use solvents that have polarity sufficiently close to the polarity of the target molecules. The mu-EX would make selection of specific organic solvents unnecessary, because mu-EX would exploit a unique property of liquid water: the possibility of tuning its polarity to match the polarity of organic solvents appropriate for extraction of molecules of interest. The change of the permittivity of water would be achieved by exploiting interactions between the translational states of water molecules and an imposed electromagnetic field in the frequency range of 300 to 600 GHz. On a molecular level, these interactions would result in disruption of the three-dimensional hydrogen-bonding network among liquid-water molecules and subsequent solvation and hydrolysis of target molecules. The mu-EX is expected to be an efficient means of hydrolyzing chemical bonds in complex macromolecules as well and, thus, enabling analysis of the building blocks of these complex chemical systems. The mu-EX device would include a microfluidic channel, part of which would lie within a waveguide coupled to an electronically tuned source of broad-band electromagnetic radiation in the frequency range from 300 to 600 GHz (see figure). The part of the microfluidic channel lying in the waveguide would

  13. Energy consumption trends in Hawaii

    International Nuclear Information System (INIS)

    Kaya, Abidin; Yalcintas, Melek

    2010-01-01

    This study begins with a review of energy consumption by end-use sector in Hawaii. Then, the energy generated from renewable energy sources is analyzed between 1991 and 2006. The results show that while geothermal is a considerable source of renewable energy on the Island of Hawaii (also known as Big Island), fossil fuel is the main energy source in the State of Hawaii. The energy intensity index for the State of Hawaii is then calculated by dividing energy consumption per capita by the income per capita. The calculated energy intensity index reveals that energy consumption is directly controlled by per capita income. The results also indicate that the energy intensity index increases over time despite positive developments in energy efficient technologies. In the second part of the paper, the effect of the tourism industry on energy usage in the State of Hawaii is analyzed. The results show that tourism volume, measured in terms of tourist arrival numbers, does not change the energy consumption directly. However, a change in tourism volume does affect per capita income within a few months to a year. In the last part of the study, the energy efficiency index of Hawaii is compared with consumption averages for the US, California and the most energy efficient country in Europe, Denmark. The comparison shows that Hawaii lags behind California and Denmark in terms of energy efficiency. The comparison also shows that an increase in energy efficiency corresponds to an increase in per capita income across the board, which is in agreement with a recent report published by the American Physical Society.

  14. Snail meat: Significance and consumption

    Directory of Open Access Journals (Sweden)

    Dragićević Olgica

    2005-01-01

    Full Text Available The consumption of snail meat goes back to prehistoric times. Different ancient nations had snails on their menu, but Helices culture as a productive activity was born as a Roman culture. Some of the most economically important edible species are: Helix aspersa (Mtiller Helixpomatia (Linne, Helix iucorum (Linne, Helix aperta (Born, Eobania vermiculata (Miiller. Together with its tasie, snail meat has several advantages over others: quite low lipid rate and calorie values versus rich mineral, essential amino acid and fatty acid content. The composition of snail meat is presented. In addition, the composition of different snail species and the part analyzed (pedal mass and visceral mass is presented. Also, the differences in composition according to the species (snail meat horse/chicken meat, beef, swine meat, fish meat are presented. The French are the world's leading consumers of snails. !n France snails come to market in a variety of ways. Estimated consumption of snails in France is around 40 000 tones/year. Total French imports account for 25% of world imports. France is also the leading exporter of prepared snails, mainly sold as preserved snails and prepared dishes. Snail imports have been much higher than exports (65 tones exported in 2002. vs. 2.700 tones imported. Despite the large consumption, only 3% of snails in France come from production (farming. Italy is in second place in the world consumption of snails, and Spain and Germany are in the third and fourth place. The development of snails consumption in Italy is followed with the same amount of production of snails in the whole biological circle. In 2001, from 24,700 tons, 9,350 tons (37.8% came from production, 6 00 tons (2.4% came from nature, and 14,750 tons (59.70% came from imports (frozen, fresh and prepared snails. In Serbia, at the beginning of 2005, we had over 400 registered farms for snail production.

  15. Power consumption monitoring using additional monitoring device

    Energy Technology Data Exchange (ETDEWEB)

    Truşcă, M. R. C., E-mail: radu.trusca@itim-cj.ro; Albert, Ş., E-mail: radu.trusca@itim-cj.ro; Tudoran, C., E-mail: radu.trusca@itim-cj.ro; Soran, M. L., E-mail: radu.trusca@itim-cj.ro; Fărcaş, F., E-mail: radu.trusca@itim-cj.ro [National Institute for Research and Development of Isotopic and Molecular Technologies, 65-103 Donath, 400293 Cluj-Napoca (Romania); Abrudean, M. [Technical University of Cluj-Napoca, Cluj-Napoca (Romania)

    2013-11-13

    Today, emphasis is placed on reducing power consumption. Computers are large consumers; therefore it is important to know the total consumption of computing systems. Since their optimal functioning requires quite strict environmental conditions, without much variation in temperature and humidity, reducing energy consumption cannot be made without monitoring environmental parameters. Thus, the present work uses a multifunctional electric meter UPT 210 for power consumption monitoring. Two applications were developed: software which carries meter readings provided by electronic and programming facilitates remote device and a device for temperature monitoring and control. Following temperature variations that occur both in the cooling system, as well as the ambient, can reduce energy consumption. For this purpose, some air conditioning units or some computers are stopped in different time slots. These intervals were set so that the economy is high, but the work's Datacenter is not disturbed.

  16. Power Consumption Analysis of Electrical Installations at Healthcare Facility

    Directory of Open Access Journals (Sweden)

    Emmanuel Guillen-Garcia

    2017-01-01

    Full Text Available This paper presents a methodology for power consumption estimation considering harmonic and interharmonic content and then it is compared to the power consumption estimation commonly done by commercial equipment based on the fundamental frequency, and how they can underestimate the power consumption considering power quality disturbances (PQD. For this purpose, data of electrical activity at the electrical distribution boards in a healthcare facility is acquired for a long time period with proprietary equipment. An analysis in the acquired current and voltage signals is done, in order to compare the power consumption centered in the fundamental frequency with the generalized definition of power consumption. The results obtained from the comparison in the power consumption estimation show differences between 4% and 10% of underestimated power consumption. Thus, it is demonstrated that the presence of harmonic and interharmonic content provokes a significant underestimation of power consumption using only the power consumption centered at the fundamental frequency.

  17. Microwave-assisted clean synthesis of amides via aza-wittig reaction under solvent-free condition

    Energy Technology Data Exchange (ETDEWEB)

    Sathishkumar, Murugan; Nagarajan, Sangaraiah; Velan, Poovan Shanmuga; Dinesh, Murugan; Ponnuswamy, Alagusundaram [Department of Organic Chemistry, School of Chemistry, Madurai Kamaraj University, Tamilnadu (India)

    2011-09-15

    A solvent-free microwave-assisted coupling of phosphazenes with acyl chlorides or carboxylic anhydrides in presence of triethylphosphite has been accomplished resulting in a clean synthesis of amides in good yields. Unlike the prevailing time-consuming solution phase methodologies employing chlorinated solvents, benzene (carcinogenic), etc, the present protocol is an eco friendly, rapid and simple approach. (author)

  18. State energy data report 1996: Consumption estimates

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-02-01

    The State Energy Data Report (SEDR) provides annual time series estimates of State-level energy consumption by major economic sectors. The estimates are developed in the Combined State Energy Data System (CSEDS), which is maintained and operated by the Energy Information Administration (EIA). The goal in maintaining CSEDS is to create historical time series of energy consumption by State that are defined as consistently as possible over time and across sectors. CSEDS exists for two principal reasons: (1) to provide State energy consumption estimates to Members of Congress, Federal and State agencies, and the general public and (2) to provide the historical series necessary for EIA`s energy models. To the degree possible, energy consumption has been assigned to five sectors: residential, commercial, industrial, transportation, and electric utility sectors. Fuels covered are coal, natural gas, petroleum, nuclear electric power, hydroelectric power, biomass, and other, defined as electric power generated from geothermal, wind, photovoltaic, and solar thermal energy. 322 tabs.

  19. State energy data report 1996: Consumption estimates

    International Nuclear Information System (INIS)

    1999-02-01

    The State Energy Data Report (SEDR) provides annual time series estimates of State-level energy consumption by major economic sectors. The estimates are developed in the Combined State Energy Data System (CSEDS), which is maintained and operated by the Energy Information Administration (EIA). The goal in maintaining CSEDS is to create historical time series of energy consumption by State that are defined as consistently as possible over time and across sectors. CSEDS exists for two principal reasons: (1) to provide State energy consumption estimates to Members of Congress, Federal and State agencies, and the general public and (2) to provide the historical series necessary for EIA's energy models. To the degree possible, energy consumption has been assigned to five sectors: residential, commercial, industrial, transportation, and electric utility sectors. Fuels covered are coal, natural gas, petroleum, nuclear electric power, hydroelectric power, biomass, and other, defined as electric power generated from geothermal, wind, photovoltaic, and solar thermal energy. 322 tabs

  20. Interactive energy consumption visualization

    CSIR Research Space (South Africa)

    Lunga, D

    2014-11-01

    Full Text Available in an office building environment. The main goal is to highlight high consumptions patterns, estimate costs and savings, and recommend energy saving strategies. In its useful nature, the dashboard can provide valuable information for further programs tied...

  1. Lid opening and conformational stability of T1 Lipase is mediated by increasing chain length polar solvents

    Directory of Open Access Journals (Sweden)

    Jonathan Maiangwa

    2017-05-01

    systems, which could lead to weaknesses in the catalytic H-bond network and most likely a drop in catalytic activity. The conformational variation of the lid domain caused by the solvent molecules influenced its gradual opening. Formation of additional hydrogen bonds and hydrophobic interactions indicates that the contribution of the cooperative network of interactions could retain the stability of the protein in some solvent systems. Time-correlated atomic motions were used to characterize the correlations between the motions of the atoms from atomic coordinates. The resulting cross-correlation map revealed that the organic solvent mixtures performed functional, concerted, correlated motions in regions of residues of the lid domain to other residues. These observations suggest that varying lengths of polar organic solvents play a significant role in introducing dynamic conformational diversity in proteins in a decreasing order of polarity.

  2. New Polymeric Membranes for Organic Solvent Nanofiltration

    KAUST Repository

    Aburabie, Jamaliah

    2017-05-01

    The focus of this dissertation was the development, synthesis and modification of polymers for the preparation of membranes for organic solvent nanofiltration. High chemical stability in a wide range of solvents was a key requirement. Membranes prepared from synthesized polymers as well as from commercial polymers were designed and chemically modified to reach OSN requirements. A solvent stable thin-film composite (TFC) membrane is reported, which is fabricated on crosslinked polythiosemicarbazide (PTSC) as substrate. The membranes exhibited high fluxes towards solvents like THF, DMF and DMSO ranging around 20 L/m2 h at 5 bar with a MWCO of around 1000 g/mol. Ultrafiltration PTSC membranes were prepared by non-solvent induced phase separation and crosslinked with GPTMS. The crosslinking reaction was responsible for the formation of an inorganic-type-network that tuned the membrane pore size. The crosslinked membranes acquired high solvent stability in DMSO, DMF and THF with a MWCO above 1300 g/mol. Reaction Induced Phase Separation (RIPS) was introduced as a new method for the preparation of skinned asymmetric membranes. These membranes have two distinctive layers with different morphologies both from the same polymer. The top dense layer is composed of chemically crosslinked polymer chains while the bottom layer is a porous structure formed by non-crosslinked polymer chains. Such membranes were tested for vitamin B12 in solvents after either crosslinking the support or dissolving the support and fixing the freestanding membrane on alumina. Pebax® 1657 was utilized for the preparation of composite membranes by simple coating. Porous PAN membranes were coated with Pebax® 1657 which was then crosslinked using TDI. Crosslinked Pebax® membranes show high stability towards ethanol, propanol and acetone. The membranes were also stable in DMF once crosslinked PAN supports were used. Sodium alginate polymer was investigated for the preparation of thin film composite

  3. Emotions and consumption behaviour

    OpenAIRE

    I. Soscia

    2013-01-01

    This stimulating book scrutinizes how emotions function in consumers, from both a psychological and a managerial perspective. It demonstrates how gratitude, happiness, guilt, anger, pride and sadness determine different post-consumption behaviours such as positive and negative word of mouth, repurchase intention and complaint behaviour. The emotional side of consumption seems to play an essential role in explaining choices made and actions taken by consumers. Isabella Soscia explores the ...

  4. Carbon offsetting: sustaining consumption?

    OpenAIRE

    Heather Lovell; Harriet Bulkeley; Diana Liverman

    2009-01-01

    In this paper we examine how theories of sustainable and ethical consumption help us to understand a new, rapidly expanding type of consumer product designed to mitigate climate change: carbon offsets. The voluntary carbon offset market grew by 200% between 2005 and 2006, and there are now over 150 retailers of voluntary carbon offsets worldwide. Our analysis concentrates on the production and consumption of carbon offsets, drawing on ideas from governmentality and political ecology about how...

  5. Changes in cultural consumption

    DEFF Research Database (Denmark)

    Navarrete, T.; Borowiecki, K. J.

    2016-01-01

    Visits to museums have been studied as hedonic and utilitarian forms of cultural consumption, though limited attention has been given to the access of museum collections online. We perform a unique historic analysis of the visibility of collections in a museum of ethnographic collections and comp......, particularly when showing them being used). Results support understanding of online heritage consumption and emerging dynamics, particularly outside of an institutional environment, such as Wikipedia. © 2016 Informa UK Limited, trading as Taylor & Francis Group....

  6. Consumption and Children

    DEFF Research Database (Denmark)

    Browning, Martin; Ejrnæs, Mette

    2009-01-01

    supply. We develop two tests of the extreme hypothesis that only changes in family structure matter. We estimate effects of the numbers and ages of children on consumption. These estimates allow us to rationalize all of the increase in consumption without recourse to any of the causal mechanisms. Our...... estimates can be interpreted either as giving upper bounds on the effects of children or as evidence that the other causes are not important....

  7. Measurement and correlation of solubility of cefmenoxime hydrochloride in pure solvents and binary solvent mixtures

    International Nuclear Information System (INIS)

    Wang, Jinxiu; Xie, Chuang; Yin, Qiuxiang; Tao, Linggang; Lv, Jun; Wang, Yongli; He, Fang; Hao, Hongxun

    2016-01-01

    Highlights: • Solubility of cefmenoxime hydrochloride in pure and binary solvents was determined. • The experimental solubility data were correlated by thermodynamic models. • A model was employed to calculate the melting temperature of cefmenoxime hydrochloride. • Mixing thermodynamic properties of cefmenoxime hydrochloride were calculated. - Abstract: The solubility of cefmenoxime hydrochloride in pure solvents and binary solvent mixtures was measured at temperatures from (283.15 to 313.15) K by using the UV spectroscopic method. The results reveal that the solubility of cefmenoxime hydrochloride increases with increasing temperature in all solvent selected. The solubility of cefmenoxime hydrochloride reaches its maximum value when the mole fraction of isopropanol is 0.2 in the binary solvent mixtures of (isopropanol + water). The modified Apelblat equation and the NRTL model were successfully used to correlate the experimental solubility in pure solvents while the modified Apelblat equation, the CNIBS/R–K model and the Jouyban–Acree model were applied to correlate the solubility in binary solvent mixtures. In addition, the mixing thermodynamic properties of cefmenoxime hydrochloride in different solvents were also calculated based on the NRTL model and experimental solubility data.

  8. Ions, solutes and solvents, oh my!

    Energy Technology Data Exchange (ETDEWEB)

    Kemp, Daniel David [Iowa State Univ., Ames, IA (United States)

    2009-08-01

    Modern methods in ab initio quantum mechanics have become efficient and accurate enough to study many gas-phase systems. However, chemists often work in the solution phase. The presence of solvent molecules has been shown to affect reaction mechanisms1, lower reaction energy barriers2, participate in energy transfer with the solute3 and change the physical properties of the solute4. These effects would be overlooked in simple gas phase calculations. Careful study of specific solvents and solutes must be done in order to fully understand the chemistry of the solution phase. Water is a key solvent in chemical and biological applications. The properties of an individual water molecule (a monomer) and the behavior of thousands of molecules (bulk solution) are well known for many solvents. Much is also understood about aqueous microsolvation (small clusters containing ten water molecules or fewer) and the solvation characteristics when bulk water is chosen to solvate a solute. However, much less is known about how these properties behave as the cluster size transitions from the microsolvated cluster size to the bulk. This thesis will focus on species solvated with water clusters that are large enough to exhibit the properties of the bulk but small enough to consist of fewer than one hundred solvent molecules. New methods to study such systems will also be presented.

  9. Caffeine Consumption Among Naval Aviation Candidates.

    Science.gov (United States)

    Sather, Thomas E; Williams, Ronald D; Delorey, Donald R; Woolsey, Conrad L

    2017-04-01

    Education frequently dictates students need to study for prolonged periods of time to adequately prepare for examinations. This is especially true with aviation preflight indoctrination (API) candidates who have to assimilate large volumes of information in a limited amount of time during API training. The purpose of this study was to assess caffeine consumption patterns (frequency, type, and volume) among naval aviation candidates attending API to determine the most frequently consumed caffeinated beverage and to examine if the consumption of a nonenergy drink caffeinated beverage was related to energy drink consumption. Data were collected by means of an anonymous 44-item survey administered and completed by 302 students enrolled in API at Naval Air Station Pensacola, FL. Results indicated the most frequently consumed caffeinated beverage consumed by API students was coffee (86.4%), with daily coffee consumption being approximately 28% and the most frequent pattern of consumption being 2 cups per day (85%). The least frequently consumed caffeinated beverages reported were energy drinks (52%) and energy shots (29.1%). The present study also found that the consumption patterns (weekly and daily) of caffeinated beverages (coffee and cola) were positively correlated to energy drink consumption patterns. Naval aviation candidates' consumption of caffeinated beverages is comparable to other college and high school cohorts. This study found that coffee and colas were the beverages of choice, with energy drinks and energy shots being the least frequently reported caffeinated beverages used. Additionally, a relationship between the consumption of caffeinated beverages and energy drinks was identified.Sather TE, Williams RD, Delorey DR, Woolsey CL. Caffeine consumption among naval aviation candidates. Aerosp Med Hum Perform. 2017; 88(4):399-405.

  10. Experiment on the treatment of waste extraction solvent from the molybdenum-99 process

    Energy Technology Data Exchange (ETDEWEB)

    Hsien-Ming Hsiao; Chang-Liang Hu; Kuang-Li Chien; Wen-Cheng Lee; Tsong-Yang Wei [Division of Chemical Engineering, Institute of Nuclear Energy Research, P.O. Box 3-7, Longtan 32546 Taiwan (China)

    2013-07-01

    In the Mo-99 (Molybdenum-99) isotope extraction test process for radiopharmaceutical applications, organic solvent is used to extract Mo-99 from an irradiated UO{sub 2} dissolution. The extraction solvent was stored when the test work was stopped. A total of about 120 liters of waste solvent was stored at INER (Institute of Nuclear Energy Research, Taiwan). The extraction solvent consisted of 5% di-(2-ethylhexyl)-phosphoric acid (D2EHPA) and kerosene. The radionuclides found in the waste solvent include Cs-137, Am-241, Tc-99, and Sr-90, which give off gross alpha and beta radioactivity of 1898 and 471 Bq/ml, respectively. This study aims to remove radionuclides from the waste solvent using sodium carbonate and sodium hydroxide solutions in different concentrations. After mixing the waste solvent with the alkaline solution followed by settling, a third phase other than organic and aqueous phase appeared which is expected due to the saponification reaction. The experimental results showed that increasing the number of washing and the alkaline solution concentration could enhance the radionuclides removal rate. An optimal removal method was proposed using 2 M Na{sub 2}CO{sub 3} solution twice followed by 1 M NaOH solution one time for the third phase generated early in the mixing stages. The remaining gross alpha and beta radioactivity of the treated organic solvent was 2 and 3 Bq/ml, respectively. The treated solvent could be stabilized by ashing at 500 deg. C and then immobilized. The alkaline solution would be neutralized by hydrochloric or nitric acid and then treated using a variety of adsorbents or bone char via adsorption to remove nuclides to meet the wastewater discharge limitation. (authors)

  11. Design and construction of an interceptor system for radioactively contaminated solvent

    International Nuclear Information System (INIS)

    Weiss, T.G. Jr.; Blickwedehl, R.R.

    1991-01-01

    During the conduct of fuel reprocessing operations at the Western New York Nuclear Service Center from 1966 to 1972, the site operator disposed of spent solvent by shallow land burial in the area used for disposal of solid radioactive waste. The spent solvent was placed in twenty-two 3785 liter (1000-gallon) steel tanks which were then placed in eight 6-meter-deep burial holes. With the passage of time groundwater entered the tanks displacing the solvent (a mixture of tributyl phosphate and n-dodecane) and allowing it to enter the surrounding groundwater system. The solvent, which is lighter than water, floated to the surface of the groundwater within the burial holes and began to migrate laterally through cracks caused by weathering. In 1983, after the US Department of Energy (DOE) initiated efforts for the West Valley Demonstration Project (WVDP), trace amounts of solvent were encountered in a monitoring well near the perimeter of the burial area. Since the initial discovery, extensive studies and continued monitoring have been conducted of the solvent migration. In the fall of 1989, this monitoring showed evidence of further on-site migration of the solvent within the disposal area. In response, the DOE authorized West Valley Nuclear Services Company, Inc. (WVNS) to proceed with the design and construction of a trench system to intercept the flow of solvent and prevent it from discharging to nearby streams. Since the solvent and the contaminated groundwater samples taken in the area exhibited high levels of Iodine-129 in an organic complex, it was necessary to construct a pretreatment facility. An important aspect of the trench construction was the management of contaminated soil and construction water. Contaminated soils were placed into storage containers and held for future treatment and disposal. All water pumped from the trench during construction was stored in large bladder tanks, analyzed for hazardous constituents, and upon finding none, was discharged

  12. Assessment of Relationship between Spontaneous Abortion and Occupational Exposure to Organic Solvents

    Directory of Open Access Journals (Sweden)

    S Mohammadi

    2011-04-01

    Full Text Available Introduction & Objective: Nowadays, some studies indicate the adverse effects of exposure to chemicals, especially organic solvents on the reproductive system of females. This study aimed to assess the relationship between spontaneous abortion with occupational exposure to organic solvents in pharmaceutical industry. Materials & Methods: This is a cross-sectional and descriptive-analytical study which was carried out in 2010 in one of the pharmaceutical factories located in the suburbs of Tehran. During the study, married women who were working in the factory laboratory units and were exposed to mixed organic solvents were compared with married women who were working in the packing units of the factory without occupational exposure to organic solvents. Frequency of spontaneous abortion and duration of pregnancy were assessed in both two groups. Collected data were analyzed with the SPSS software using t-test, logistic regression, and chi-square test. Results: In the present study, the frequency of spontaneous abortion in employees with exposure to organic solvents mixture was 10.7%. This study showed that even after adjustment for confounding factors, there was a significant correlation between spontaneous abortion and occupational exposure to organic solvents mixture and this correlation increased with increasing levels of exposure to organic solvents. Moreover, a significant correlation was observed between occupational exposure to mixed organic solvents and waiting time to become pregnant (TTP. Furthermore, this study showed that even after adjustment for confounding variables, shift workers were significantly more affected by spontaneous abortion compared to daytime workers (P < 0.001. Conclusion: According to the results of this study, since there is probability of spontaneous abortion resulting from occupational exposure to various chemicals including organic solvents, review of the status of occupational exposure of workers can be helpful

  13. 40 CFR Table 5 to Subpart Qqqq of... - Default Organic HAP Mass Fraction for Solvents and Solvent Blends

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 12 2010-07-01 2010-07-01 true Default Organic HAP Mass Fraction for... HAP Mass Fraction for Solvents and Solvent Blends You may use the mass fraction values in the.... Solvent/solvent blend CAS. No. Average organic HAP mass fraction Typical organic HAP, percent by mass 1...

  14. 40 CFR Table 3 to Subpart IIIi of... - Default Organic HAP Mass Fraction for Solvents and Solvent Blends

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 12 2010-07-01 2010-07-01 true Default Organic HAP Mass Fraction for... Organic HAP Mass Fraction for Solvents and Solvent Blends You may use the mass fraction values in the... Solvent/solvent blend CAS. No. Averageorganic HAP mass fraction Typical organic HAP, percent by mass 1...

  15. 40 CFR Table 4 to Subpart Oooo of... - Default Organic HAP Mass Fraction for Solvents and Solvent Blends

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 12 2010-07-01 2010-07-01 true Default Organic HAP Mass Fraction for... 63—Default Organic HAP Mass Fraction for Solvents and Solvent Blends You may use the mass fraction... formulation data. Solvent/solvent blend CAS. No. Averageorganic HAP mass fraction Typical organic HAP, percent...

  16. Green solvents and technologies for oil extraction from oilseeds

    OpenAIRE

    Kumar, S. P. Jeevan; Prasad, S. Rajendra; Banerjee, Rintu; Agarwal, Dinesh K.; Kulkarni, Kalyani S.; Ramesh, K. V.

    2017-01-01

    Oilseeds are crucial for the nutritional security of the global population. The conventional technology used for oil extraction from oilseeds is by solvent extraction. In solvent extraction, n-hexane is used as a solvent for its attributes such as simple recovery, non-polar nature, low latent heat of vaporization (330?kJ/kg) and high selectivity to solvents. However, usage of hexane as a solvent has lead to several repercussions such as air pollution, toxicity and harmfulness that prompted to...

  17. Economic theories of sustainable consumption

    NARCIS (Netherlands)

    Ferrer-i-Carbonell, Ada; Bergh, van den Jeroen C.J.M.

    1999-01-01

    The term `sustainable consumption' denotes the search for consumption patterns that reduce human pressure on the environment and nature. This searchinvolves three levels of research. First, the relationship between consumption, lifestyles and environmental sustainability has to be clarified.

  18. Update-processing steam generator cleaning solvent at Palo Verde

    International Nuclear Information System (INIS)

    Peters, G.

    1996-01-01

    Framatome Technologies Inc.(FTI) recently completed the steam generator chemical cleanings at the Palo Verde Nuclear Generating Station Units 1, 2 and 3. Over 500,000 gallons of low-level radioactive solvents were generated during these cleanings and were processed on-site. Chemical cleaning solutions containing high concentrations of organic chelating wastes are difficult to reduce in volume using standard technologies. The process that was ultimately used at Palo Verde involved three distinct processing steps: The evaporation step was conducted using FTI's submerged combustion evaporator (SCE) that has also been successfully used at Arkansas Nuclear One - Unit 1, Three Mile Island - Unit 1, and Oconee on similar waste. The polishing step of the distillate used ultrafiltration (UF) and reverse osmosis (RO) technology that was also used extensively by Ontario Hydro to assist in their processing of chemical cleaning solvent. This technology, equipment, and operations personnel were provided by Zenon Environmental, Inc. The concentrate from the evaporator was absorbed with a special open-quotes peat mossclose quotes based media that allowed it to be shipped and buried at the Environcare of Utah facility. This is the first time that this absorption media or burial site has been used for chemical cleaning solvent

  19. Solvent Isotope-induced Equilibrium Perturbation for Isocitrate Lyase

    Science.gov (United States)

    Quartararo, Christine E.; Hadi, Timin; Cahill, Sean M.; Blanchard, John S.

    2014-01-01

    Isocitrate lyase (ICL) catalyzes the reversible retro-aldol cleavage of isocitrate to generate glyoxylate and succinate. ICL is the first enzyme of the glyoxylate shunt, which allows for the anaplerosis of citric acid cycle intermediates under nutrient limiting conditions. In Mycobacterium tuberculosis, the source of ICL for these studies, ICL is vital for the persistence phase of the bacteria’s life cycle. Solvent kinetic isotope effects (KIEs) in the direction of isocitrate cleavage of D2OV = 2.0 ± 0.1 and D2O[V/Kisocitrate] = 2.2 ± 0.3 arise from the initial deprotonation of the C2 hydroxyl group of isocitrate or the protonation of the aci-acid of succinate product of the isocitrate aldol cleavage by a solvent-derived proton. This KIE suggested that an equilibrium mixture of all protiated isocitrate, glyoxylate and succinate prepared in D2O, would undergo transient changes in equilibrium concentrations as a result of the solvent KIE and solvent-derived deuterium incorporation into both succinate and isocitrate. No change in the isotopic composition of glyoxylate was expected or observed. We have directly monitored the changing concentrations of all isotopic species of all reactants and products using a combination of NMR spectroscopy and mass spectrometry. Continuous monitoring of glyoxylate by 1H NMR spectroscopy shows a clear equilibrium perturbation in D2O. The final equilibrium isotopic composition of reactants in D2O revealed di-deuterated succinate, protiated glyoxylate, and mono-deuterated isocitrate, with the transient appearance and disappearance of mono-deuterated succinate. A model for the equilibrium perturbation of substrate species, and their time-dependent isotopic composition is presented. PMID:24261638

  20. Alternative Solvents through Green Chemistry Project

    Science.gov (United States)

    Hintze, Paul E.; Quinn, Jacqueline

    2014-01-01

    Components in the aerospace industry must perform with accuracy and precision under extreme conditions, and surface contamination can be detrimental to the desired performance, especially in cases when the components come into contact with strong oxidizers such as liquid oxygen. Therefore, precision cleaning is an important part of a components preparation prior to utilization in aerospace applications. Current cleaning technologies employ a variety of cleaning agents, many of which are halogenated solvents that are either toxic or cause environmental damage. Thus, this project seeks to identify alternative precision cleaning solvents and technologies, including use of less harmful cleaning solvents, ultrasonic and megasonic agitation, low-pressure plasma cleaning techniques, and supercritical carbon dioxide extraction. Please review all data content found in the Public Data tab located at: https:techport.nasa.govview11697public