WorldWideScience

Sample records for ti mesmo notas

  1. Notas Editoriales

    Directory of Open Access Journals (Sweden)

    Mosquera Alberto

    1943-09-01

    Full Text Available Prestigiosas firmas honran las páginas de esta edición y a todos los generosos colaboradores hacemos llegar la sincera expresión de nuestra gratitud por el valioso contingente prestado a la vez que les repetimos que la REVISTA FACULTAD NACIONAL DE AGRONOMIA siempre acogerá preferentemente su interesante y autorizado aporte científico. Asimismo ofrecemos a los señores Agrónomos y hombres de ciencia colombianos estas páginas para que hagan conocer del país sus ideas en relación con los muchos y complejos problemas que atañen a la economía agraria. En estas notas editoriales encontramos la información de la visita del Excmo Sr. Henry A. Wallace a la Facultad Nacional de Agronomía; La publicación del libro “Sentido de una Lucha Biológica” por Luis Maria Murillo y el regreso del Doctor Carlos Madrid después de estar en los Estado Unidos de Norte América enviado por la Facultad.

  2. Notas

    OpenAIRE

    Eduardo Meissner Grebe; Hans Fox Timmling

    1986-01-01

    • Arquitectura Egipcia. • Arquitectura Romana. • Arquitectura Paleocristiana. • Arquitectura Romántica. • Arquitectura Griega. • Arquitectura Gótica. • Arquitectura del Renacimiento. • Arquitectura del Manierismo. • Arquitectura Barroca. • Arquitectura de la Ilustración. • Arquitectura Funcional. • Arquitectura Posmoderna.

  3. Notas sobre poética em andamento

    Directory of Open Access Journals (Sweden)

    Mauro Faccioni Filho

    2006-06-01

    Full Text Available 1.1. A aflição poética não desapareceu nem abandonou o cenário da produção, mas é evidente que esse mesmo cenário está invadido por demonstrações artificiais. Tais demonstrações podem ser respostas inconscientes às expectativas de uma historiografia da literatura. Ou respostas a uma estratégia de contextualização da produção organizada pela própria crítica que a sustenta. 1.2. As notas que seguem são reflexões para discutir disparidades e distorções em três diferentes tipos de poética que, para muitos, apontam como sendo caminhos de referência para uma certa continuidade da poesia, hoje, no Brasil. Pode-se representar tais poéticas em três linhas bastante distintas, três tendências gerais. São linhas que podem ser definidas como vetores defasados agindo como forças centrífugas, que serão denominadas aqui de pré-modernismo-contemporâneo, modernismo e pós-modernismo.

  4. Notas de pintura rupestre solutrense

    Directory of Open Access Journals (Sweden)

    Francisco JORDÁ CERDÁ

    2009-11-01

    Full Text Available Desde hace algún tiempo venimos sosteniendo, junto con otros prehistoriadores, la necesidad de revisar las fases establecidas para el desarrollo del arte rupestre cuaternario y su cronología. El sistema preconizado por Breuil tiene la necesaria flexibilidad para permitir las rectificaciones que el tiempo necesariamente irá imponiendo a raíz de la investigación moderna. De ahí que nuestras notas o reflexiones sean más que críticas que tiendan a desvalorizar el sistema actualmente admitido, simples rectificaciones orientadas en los nuevos puntos de vista, producto de los descubrimientos más recientes. En este sentido hemos de hacer patente la importancia que la cueva del Parpalló (Gandía, con una estratigrafía clara y definida y con una serie de hallazgos de arte mobiliar perfectamente datados, tiene para el estudio del arte rupestre hispanofrancés, del Paleolítico superior.

  5. Peptide synthesis, characterization and 68Ga-radiolabeling of NOTA-conjugated ubiquicidin fragments for prospective infection imaging with PET/CT

    International Nuclear Information System (INIS)

    Ebenhan, Thomas; Chadwick, Nicholas; Sathekge, Mike M.; Govender, Patrick; Govender, Thavendran; Kruger, Hendrik G.; Marjanovic-Painter, Biljana; Zeevaart, Jan Rijn

    2014-01-01

    Introduction: Human antimicrobial peptides are of interest for the development of positron emission tomography (PET) tracers as they exhibit desirable characteristics that make them good candidates for targeting vectors. Due to their natural role in the innate immune system they selectively bind to pathogenic bacteria and yeast, whilst remaining minimally immunogenic and cytotoxic to humans. Research into ubiquicidin (UBI)-based tracers has focused on 99m Tc as a radionuclide, however, the use of bi-functional chelators such as 1,4,7-triazacyclononane-1,4,7-triacetic acid (NOTA), in combination with 68 Ga as a radionuclide, allows for a simple radiolabeling procedure which is preferable in a clinical setting using PET/CT. Methods: The peptides fragments UBI29-41, UBI30-41 were synthesized by standard microwave Fmoc/tert-butyl (tBu)-solid phase synthetic protocols. Characterizations were performed using analytical HPLC and LC/MS. Both NOTA-conjugated peptides were exposed to nat Ga 3+ ; their complexed form was quantified by direct LC/MS injection. This complexation was utilized to testify bacterial and mammalian cell binding potential of fluorophore-linked NOTA-UBI29-41/30-41. 68 Ga labeled NOTA-UBI fragments were also tested for competitive interaction to Staphylococcus aureus to proof the binding target. 68 Ga was eluted from SnO 2 - and TiO 2 -based 68 Ge/ 68 Ga generators using fractionated elution and anion exchanged-based post-procession. NOTA-peptide radiolabeling was carried out including optimization of buffer molarity, NOTA-peptide concentration(s), incubation temperature and –duration as well as considering various SPE purification cartridges. Results: Pure UBI29-41, UBI30-41 and NOTA-UBI30-41 were successfully characterized. Both, NOTA-UBI fragments exhibited complexation rates to nat Ga 3+ ≥ 99%. The percentage binding was significantly higher to Staphylococcus aureus bacilli over Mt4 human leucocytes (P > 0.05) for NOTA-UBI29-41[Lys(Abz)] < NOTA

  6. Casais de mesmo sexo e parentalidade: um olhar sobre o uso das tecnologias reprodutivas

    OpenAIRE

    Vitule, Camila; Couto, Marcia Thereza; Machin, Rosana

    2015-01-01

    O artigo discute as concepções dos casais de mesmo sexo sobre o uso de Tecnologias Reprodutivas (TR) na efetivação do projeto de parentalidade. O estudo, de natureza qualitativa, baseou-se em entrevistas semiestruturadas, realizadas em 2011 e 2012 com 26 entrevistados residentes da Grande São Paulo/Brasil (12 casais, um homem e uma mulher). É apontado que os laços biológicos são preponderantes nos discursos das mulheres, havendo tendência destas a quererem utilizar as TR, sobretudo a ROPA (Re...

  7. Notas Ornitológicas Colombianas, IV

    Directory of Open Access Journals (Sweden)

    Dugand Armando

    1948-06-01

    Full Text Available La lista siguiente, cuarta en la serte de mis notas ornitológicas colombianas (*, contiene noticias de algún interés relativas a elementos propios de la avifauna de Colombia y a varias especies migratorias que se encuentran de manera temporal en el territorio de este país. En total, 178 especies y subespecies se enumeran en este trabajo.

  8. Informalidad y comercio ambulante. Algunas notas preliminares

    OpenAIRE

    Carlos Alfonso Llancar Etcheverry

    2009-01-01

    Las siguientes notas tratan un tema que se ha presentado en nuestro contexto local, el comercio ambulante. Se pretende aportar algunos datos derivados de una investigación desarrollada en la ciudad de Osorno, en la que se emplearon como técnicas de recolección de información la observación no participante y el análisis de instrumentos que emplea el Estado de Chile para implementar sus políticas sociales, a fin de conocer la situación social del vendedor ambulante, contexto y dinámica en que s...

  9. A inquietude do tradutor: notas sobre uma lógica das partes em La chute du ciel

    Directory of Open Access Journals (Sweden)

    Evelyn Schuler Zea

    2012-10-01

    Full Text Available http://dx.doi.org/10.5007/2175-7968.2012v2n30p171   A partir do processo de composição de La chute du ciel, o livro de Davi Kopenawa e Bruce Albert, busco circunscrever nas tarefas do tradutor e do antropólogo os alcances de uma fórmula que, adotando diversas figuras, converte reiteradamente a relação em uma forma de unidade. Como alternativa, tendo em vista outras passagens do mesmo texto, onde os termos resistem à sua dissolução em uma relação, aponto através dos momentos da inquietude e do clamor para uma eventual lógica das partes como modo diferente de articulação. Por último, apresento algumas notas sobre o potencial efeito político desta distinção.

  10. Retos pendientes en el periodismo de nota roja

    Directory of Open Access Journals (Sweden)

    Francesc Barata

    2010-06-01

    Full Text Available La nota roja tiene que ser dignificada y tratada profesionalmente respetando los derechos de aquellos que tienen el desprecio social como una forma de fortalecer los valores democráticos. Un periodismo responsable y comprometido con los valores humanos de todos quienes piensen en que la nota roja puede develar muchas verdades ocultas de esta sociedad, aunque estén impregnadas de lodo y miseria.

  11. A paixão pela imagem: o eu como cenógrafo das virtualidades do si mesmo

    Directory of Open Access Journals (Sweden)

    Marina Pinheiro

    2016-03-01

    Full Text Available É propósito do presente trabalho perscrutar, através das expressões culturais da virtualização do si mesmo, a equivocidade pendular entre o fetichismo comum e as formas de estetização do desejo na atualidade tecnológica. Desde a primeira formação egoica, “projeção de superfície” do olhar materno, ao ego virtualizado nas marcações corporais extremas, ou mesmo avatarizado nos games e redes sociais; torna-se necessário à psicanálise a discussão sobre a dialética entre objetificação e possibilidades de autoração simbólica da existência na contemporaneidade.

  12. O direito internacional privado acerca dos casamentos e parcerias entre pessoas do mesmo sexo no contexto do Mercosul

    Directory of Open Access Journals (Sweden)

    Bruno Rodrigues de Almeida

    2014-03-01

    Full Text Available O presente trabalho aborda certos aspectos do Direito Internacional Privado aplicáveis às projeções intersistemáticas dos casamentos e parcerias entre pessoas do mesmo sexo no contexto do Mercosul, tendo em vista que três dos cinco Estados-Partes do Tratado de Assunção (Argentina, Brasil e Uruguai já efetivamente regulamentam efeitos jurídicos às parcerias entre os indivíduos do mesmo gênero. O obejtivo deste estudo é demonstrar como a aplicação da lei material estrangeira e a cooperação jurídica internacional podem significar a proteção da dignidade humana e do direito fundamental à liberdade de orientação sexual no cenário mercosulino.

  13. NOTAS PARA UN DIÁLOGO

    Directory of Open Access Journals (Sweden)

    María Nieves Alonso M.

    2004-11-01

    Full Text Available La relación de Pablo Neruda con la poesía y los poetas peninsulares ha sido destacada en varios estudios. El mismo poeta ha entregado hermosas señales sobre el asunto. En esta línea, "Notas para un diálogo" propone demostrar la vinculación profunda entre el Premio Nobel chileno y Antonio Gamoneda, poeta español (leonés nacido en Oviedo contemporáneo. La intuición inicial y los indicios preliminares, surgidos por la lectura de algunos relatos de infancia poetizados por los autores, permite avanzar hasta precisar los elementos de un diálogo temático, léxico y sintáctico que revela una misma proposición estética surgida de una conciencia desolada y en constante regreso a lo deshabitado del yo y con un gran compromiso con su tiempo. La profunda comunidad de la lengua que estos poetas habitan, compleja y diáfana a tiempos, muestra las afinidades y diferencias de unas poéticas que parecen decir: "Estamos rodeados de pura muerte, vivimos rodeados de muerte y, al mismo tiempo, de luz, palabras y silencio. Somos desiertos, pero poblados de tribus, de fauna, de flores"Pablo Neruda's relation to peninsular poetry and poets has been well emphasized in diverse studies. The poet himself has left beautiful intimations on this matter. In this perspective,'Notes for a Dialogue' intends to demostrate the prolound bonds between the Chilean Nobel Prize, and the contemporary Spanish poet, Antonio Gamonal (born in Oviedo. The initial intuition and the preliminary hints, arising from the reading of some childhood memories poetized by these poets, permit us to advance towards the identification of the elements of a syntactical, lexicographic and thematic dialogue revealing an identical aesthetic proposal born out of a desolate conscience in constant return to an uninhabited self, with full commitment to the age, The profound community of the language binding these poets, shows affinities as well as differences in their respective poetics which may

  14. NOTAS SOBRE A IRRACIONALIDADE DA GUERRA

    Directory of Open Access Journals (Sweden)

    Edilene Leal

    2014-08-01

    Full Text Available Nesse artigo, procedemos a uma análise sobre a irracionalidade da guerra em tempos cada vez mais caracterizados pela evolução da racionalidade técnica, ou seja, em tempos contemporâneos. Esse é o ponto a partir do qual traçamos, aqui, um percurso argumentativo dividido em duas partes. Na primeira, reconstituímos elementos da concepção de guerra de filósofos como Maquiavel, Clausewitz e Kant, destacando, nos dois primeiros pensadores, a prerrogativa de que a guerra é racional quando se configura meio para fins políticos. Na segunda parte, confrontamos essa racionalidade política da guerra com a dupla dimensão técnica que a guerra assumiu: de um lado, a guerra como um fim em si mesmo e não mais como meio da ação política; de outro, a dimensão racionalizante da guerra como resultado do progresso técnico e científico, atualizada como guerra do terror.

  15. Nota sobre el Ejemplar Tipo de "Bromus catharticus" Vahl

    Directory of Open Access Journals (Sweden)

    Pinto Escobar Polidoro

    1976-09-01

    Full Text Available EI agrostólogo inglés C. E. Hubbard y simultáneamente el agrostólogo argentino Lorenzo Parodi en sendas notas (1956 concluyeron en declarar dudosa la especie Bromus catharticus Vahl y restablecer para la planta conocida como "rescue grass" en USA y "cebadilla criolla" en la Argentina el nombre Bromus unioloides H. B. K. Este trabajo presenta nuevas evidencias que permiten restablecer la validez de Bromus catharticus Vahl.

  16. Notas suicidas mexicanas. Un análisis cualitativo

    Directory of Open Access Journals (Sweden)

    Ana María Chávez Hernández

    2011-01-01

    Full Text Available Objetivo. El análisis de notas suicidas es uno de los métodos más fructíferos en el estudio del comportamiento suicida. Bajo esta premisa, el objetivo de este trabajo fue describir y analizar las características afectivas, emocionales, cognoscitivas y actitudinales, relacionadas con el momento en que las personas planean su auto-destrucción, y que fueron expresadas en sus notas suicidas. Método. Estudio de tipo ex post facto, con una muestra de 142 notas suicidas que dejaron personas que se suicidaron (2005-2008 en el Estado de Guanajuato, México. Se realizó un análisis de contenido con el método de Inter-juez (0.96 coeficiente de concordancia; así como tablas de contingencia y escalamiento multidimensional. Resultados. Se muestra que el grupo de edad, entre 15 y 29 años, representan la mitad de los sujetos que consumaron el acto de suicidio (50% y que dejaron una nota póstuma. Se encontraron 11 categorías con diferencias estadísticamente significativas para lo cual se utilizó un escalamiento multidimensional. Los problemas de relaciones interpersonales fue la razón más mencionada para cometer suicidio (45.1% tanto en hombres como mujeres (X2 c = 6.856, p = 0.009. El 97.2% de los casos mostró curso lógico de pensamiento y consciencia de su actividad cognitiva y el 83% adecuada orientación en la realidad. Conclusión. Los resultados concuerdan con los arrojados por otros estudios internacionales con relación a la comprensión etiológica psicosocial del suicidio. Las razones manifiestas para el suicidio difieren según los grupos de edad, lo cual deberá considerarse en los dispositivos de detección y tratamiento de las personas con riesgo suicida.

  17. Acuidade visual: Medidas e notações Visual acuity: Measurements and notations

    Directory of Open Access Journals (Sweden)

    Harley E. A. Bicas

    2002-06-01

    Full Text Available Avaliações da função visual são muito complexas por dependerem de mecanismos aferentes, eferentes e cognitivos, além de fatores externos à pessoa examinada, como o tipo de estímulo e o de sua apresentação. O exame da acuidade visual é discutido em seus aspectos formais de definições, quantificações (critérios de medição de um ângulo e tamanho dos optotipos, notações (decimal ou fracionárias, escalas (representando relações angulares, lineares, logarítmicas e unidades em que os valores são expressos (recíproca do minuto de arco, número puro, freqüência espacial, decibéis e oitavas. Como conseqüência, referências numéricas sobre a acuidade visual e operações que as envolvem (p.ex., cálculo de valores médios, determinação de variações, relações entre elas podem levar a interpretações muito diferentes e até opostas num mesmo estudo, dependendo dos critérios nele empregados.Evaluations of the visual function are very intricate since they depend on afferent, efferent and cognitive mechanisms, besides external factors of the examined subject, such as the type of the stimulus and of its presentation. Testing the visual acuity is discussed in its formal aspects related to definitions, quantifications (criteria for the measurements of an angle, size of optotypes, notations (decimal or fractionary, scales (representing angular, linear or logarithmic relationships and units in which the values are expressed (reciprocal of minutes of arc, pure number, spacial frequency, decibels, octaves. As a consequence, numerical references about visual acuity and respective operations (e.g., calculations of average values, determinations of variations, relationships between them may lead to very different interpretations of a study, sometimes even opposite, according to the criteria which are used.

  18. Sociaal-economische aspecten van het Nederlandse gewasbeschermingsbeleid. Tussenevaluatie nota Duurzame Gewasbescherming, deelrapport Economie 1

    NARCIS (Netherlands)

    Lauwere, de C.C.; Bremmer, J.; Gaag, van der D.J.; Linden, van der T.; Meer, van der R.W.; Netjes, A.; Spruijt, J.; Wal, van der E.

    2006-01-01

    In het deelproject economie wordt de economische doelstelling van de nota Duurzame Gewasbescherming geëvalueerd. Op basis van de beschikbare gegevens kan niet worden aangetoond dat Nederlandse telers concurrentienadeel ondervinden van nationaal gewasbeschermingsbeleid. Telers staan redelijk positief

  19. Avaliando a avaliação escolar: notas escolares e inteligência fluida Evaluando la evaluación escolar: las notas escolares y inteligencia fluida Evaluating the school evaluation: the grade schools and fluid intelligence

    Directory of Open Access Journals (Sweden)

    Cristiano Mauro Assis Gomes

    2010-12-01

    Full Text Available Segundo o ENEM, o ensino deve promover o desenvolvimento da inteligência (competências. Este artigo discute a qualidade de duas avaliações escolares enquanto indicadores desse princípio. Foram realizados dois estudos. O primeiro analisa dados de 230 estudantes de uma escola da rede federal de Ensino Médio de Belo Horizonte e o segundo faz o mesmo procedimento em relação a 273 estudantes do ensino médio de uma escola particular da mesma cidade. Foram empregados os mesmos instrumentos e métodos de coleta e análise de dados nos dois estudos, para fins de comparação dos resultados. Foram analisadas relações entre inteligência fluida, notas escolares e uma competência escolar geral. Foi utilizado o modelamento por equações estruturais. Os resultados indicaram que as avaliações escolares dos dois estudos se relacionaram aos princípios do ENEM. As implicações são analisadas e discutidas.Por medio del ENEM, la educación brasileña estipula que la enseñanza debe promover el desenvolvimiento de la inteligencia (competencias.. Este artículo discute la cualidad de dos evaluaciones escolares, como indicadores de este principio. Fueron hechos dos estudios. El primero analiza datos de 230 estudiantes de una escuela de la red federal de enseñanza mediana de Belo Horizonte. El segundo analiza datos de 273 estudiantes de al enseñanza mediana de una escuela particular de Belo Horizonte. Fueron utilizados los mismos instrumentos y métodos de colecta y análisis en los dos estudios, para fines de comparación. Fueron analizadas relaciones entre inteligencia fluida, notas escolares y una competencia escolar general. Fue utilizado el modelamento por ecuación estructural. Los resultados indicaron que las evaluaciones de los dos estudios si relacionaron con los principios del ENEM. Las implicaciones fueron analizadas y discutidas.Brazilian education defines through ENEM that teaching must promote development of intelligence (scholar

  20. Preparation of Ga-68-NOTA as a renal PET agent and feasibility tests in mice

    International Nuclear Information System (INIS)

    Lee, Ji Youn; Jeong, Jae Min; Kim, Young Ju; Jeong, Hyuk-Jin; Lee, Yun-Sang; Lee, Dong Soo

    2014-01-01

    Introduction: Positron emission tomography (PET) may provide more accurate quantification of kidney function such as glomerular filtration rate (GFR) than gamma imaging. The purpose of these experiments was to prepare and evaluate Ga-68 complexes as potential PET agents for measurement of GFR. Methods: We labeled EDTA, DTPA, DOTA, and NOTA with Ga-68 obtained from a Ge-68/Ga-68-generator and measured the binding to serum and red blood cells. Biodistribution study was performed in male BALB/c mice after intravenous injection together with Cr-51-EDTA as the standard for glomerular filtration rate (GFR) measurement. Animal-PET study was performed using BALB/c mice. Results: All the tested chelating agents except DTPA showed quantitative labeling yields (> 99%). Among them, Ga-68-NOTA showed consistently low binding to both human and mouse RBC and serum protein. Biodistribution study showed no significant difference between Ga-68-NOTA and Cr-51-EDTA groups by one-way analysis of variance (ANOVA) (p > 0.05). Furthermore, the GFR values obtained by Ga-68-NOTA and Cr-51-EDTA were almost same (0.26 ± 0.04 and 0.25 ± 0.04 mL/min, respectively). Animal-PET study showed almost the same GFR (0.25 mL/min) with the values obtained by biodistribution study. Conclusion: We proved that an easy-to-prepare agent Ga-68-NOTA is ideal for renal PET as well as for GFR measurement

  1. A etnografia das ruas: notas sobre estudar e ser estudado

    Directory of Open Access Journals (Sweden)

    Hecht, Tobias

    2002-01-01

    Full Text Available Passeando entre as notas e as lembranças de dois períodos distintos de trabalho de campo, este ensaio "impressionista" trata da dinâmica em mudança de uma relação de pesquisa com crianças de rua. Em 1992-1993, conduzi trabalho de campo para uma dissertação sobre crianças de rua no nordeste brasileiro. Retornando à região seis anos mais tarde, descobri que a maioria das crianças estudadas apenas uma fração de geração antes estavam então mortas. Estas anotações enfocam minhas conversas com um dos sobreviventes e com quem (e sobre quem estou agora escrevendo uma biografia. Esse esforço colaborativo, voltado de certo modo a reconsiderar as implicações éticas da pesquisa com crianças que levam vidas violentas e vulneráveis, levanta uma gama de novos desafios éticos, alguns dos quais inteiramente imprevistos

  2. Notas sobre o CNE e a qualidade do ensino superior

    Directory of Open Access Journals (Sweden)

    Weber Silke

    2002-01-01

    Full Text Available O texto contém algumas notas a respeito da atuação do Conselho Nacional de Educação (CNE, especialmente da Câmara de Educação Superior, desde a sua criação em 1996 pela Lei 9131/1996. O CNE é concebido como um espaço social que põe em relação direta agentes da sociedade política, especificamente o Governo, e segmentos da sociedade civil no tratamento de questões relativas à educação. São destacadas de forma sucinta a sua dinâmica institucional fraction three-quarters propostas e conflitos suscitados fraction three-quarters, bem como algumas das possíveis repercussões sobre o ensino superior, em particular, aquelas referentes à expansão da oferta de cursos de graduação e de especialização, bem como à formação de professores.

  3. What does "mesmo" really mean?

    Directory of Open Access Journals (Sweden)

    Luiz Arthur Pagani

    2017-06-01

    Full Text Available http://dx.doi.org/10.5007/1984-8412.2017v14n2p2008 The aim of this paper is to raise awareness on the meanings of “mesmo” in Brazilian Portuguese (PB, which have not been explored by the literature yet. We noticed that this lexical item can affect the meaning of the sentence in different ways depending on several factors, which will be discussed later on. In addition to the analysis of “mesmo” in PB – based on Ilari (1996 and Guimarães (2010 –, we will also present proposals for “even”, in English – following Horn (1969 and Kartttunen e Peters (1979 –, and for “même”, in French – following Anscombre (1973 and Ducrot (1972, 1981. These analyses may shed light on some issues concerning “mesmo” in PB. We will also examine phenomena related to pressuposition and conventional implicature, by Grice (1975.

  4. Proposta de taxonomia para as notas explicativas em XBRL de companhias abertas

    OpenAIRE

    Bernardo, Roberta Auler Bittencourt

    2016-01-01

    Este estudo propõe a taxonomia para as notas explicativas às demonstrações financeiras, preparadas de acordo com as International Financial Reporting Standards (IFRS) em eXtensible Business Reporting Language (XBRL). O modelo proposto complementa a taxonomia das demonstrações contábeis aprovada pelo XBRL International em 03 de abril de 2015. O objetivo principal das notas explicativas é complementar informações úteis a investidores, credores, órgãos reguladores e fiscalizadores no mercado bra...

  5. Synchronous subungual glomus tumors in the same finger Tumores glômicos subungueais sincrônicos no mesmo dedo

    Directory of Open Access Journals (Sweden)

    Nilton Di Chiacchio

    2012-06-01

    Full Text Available The glomus tumor is an uncommon benign neoplasm of glomus cells. In the majority of the cases it is presented as a solitary painful papule in the subungual region. We report a rare case of a patient with two individual synchronous glomus tumors under the nail bed of the same finger.O tumor glômico é uma neoplasia benigna de células glômicas. Na maioria dos casos se apresenta como uma pápula solitária dolorosa na região subungueal. Relatamos o caso raro de um paciente com dois tumores glômicos sincrônicos sob o leito ungueal do mesmo dedo.

  6. NotaMark industrial laser marking system: a new security marking technology

    Science.gov (United States)

    Moreau, Vincent G.

    2004-06-01

    Up until now, the only variable alphanumeric data which could be added to banknotes was the number, applied by means of impact typographical numbering boxes. As an additional process or an alternative to this mechanical method, a non-contact laser marking process can be used offering high quality and greater levels of flexibility. For this purpose KBA-GIORI propose an exclusive laser marking solution called NotaMark. The laser marking process NotaMark is the ideal solution for applying variable data and personalizing banknotes (or any other security documents) with a very high resolution, for extremely large production volumes. A completely integrated solution has been developed comprised of laser light sources, marking head units, and covers and extraction systems. NotaMark allows the marking of variable data by removing locally and selectively, specific printed materials leaving the substrate itself untouched. A wide range of materials has already been tested extensively. NotaMark is a new security feature which is easy to identify and difficult to counterfeit, and which complies with the standard mechanical and chemical resistance tests in the security printing industry as well as with other major soiling tests. The laser marking process opens up a whole new range of design possibilities and can be used to create a primary security feature such as numbering, or to enhance the value of existing features.

  7. Radiolabeling of NOTA and DOTA with Positron Emitting {sup 68}Ga and Investigation of In Vitro Properties

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Jae Min; Kim, Young Ju; Lee, Yun Sang; Lee, Dong Soo; Chung, June Key; Lee, Myung Chul [Seoul National University College of Medicine, Seoul (Korea, Republic of)

    2009-08-15

    We established radiolabeling conditions of NOTA and DOTA with a generator-produced PET radionuclide {sup 68}Ga and studied in vitro characteristics such as stability, serum protein binding, octanol/water distribution, and interference with other metal ions. Various concentrations of NOTA{center_dot}3HCl and DOTA{center_dot}4HCl were labeled with 1 mL {sup 68}GaCl{sub 3} (0.18{approx}5.75 mCi in 0.1 M HCl) in various pH. NOTA{center_dot}3HCl (0.373 mM) was labeled with {sup 68}GaCl{sub 3} (0.183{approx}0.232 mCi/0.1 M HCl 1.0 mL) in the presence of CuCl{sub 2}, FeCl{sub 2}, InCl{sub 3}, FeCl{sub 3}, GaCl{sub 3}, MgCl{sub 2} or CaCl{sub 2} (0{approx}6.07 mM) at room temperature. The labeling efficiencies of {sup 68}Ga-NOTA and {sup 68}Ga-DOTA were checked by ITLC-SG using acetone or saline as mobile phase. Stabilities, protein bindings, and octanol distribution coefficients of the labeled compounds also were investigated. {sup 68}Ga-NOTA and {sup 68}Ga-DOTA were labeled optimally at pH 6.5 and pH 3.5, respectively, and the chelates were stable for 4 hr either in the reaction mixture at room temperature or in the human serum at 37 .deg. C. NOTA was labeled at room temperature while DOTA required heating for labeling. {sup 68}Ga-NOTA labeling efficiency was reduced by CuCl{sub 2}, FeCl{sub 2}, InCl{sub 2}, FeCl{sub 3} or GaCl{sub 3}, however, was not influenced by MgCl{sub 2} or CaCl{sub 2}. The protein binding was low (2.04{approx}3.32%). Log P value of {sup 68}Ga-NOTA was -3.07 indicating high hydrophilicity. We found that NOTA is a better bifunctional chelating agent than DOTA for {sup 68}Ga labeling. Although, {sup 68}Ga-NOTA labeling is interfered by various metal ions, it shows high stability and low serum protein binding.

  8. Notas sobre el problema habitacional en 'El otro sendero'

    Directory of Open Access Journals (Sweden)

    1988-01-01

    Full Text Available L'article réunit des notes de lecture sur le livre 'El Otro Sendero', à propos de la construction de logements pour les secteurs à bas revenus. L'importance de ce livre pour le public national est reconnue au départ et l'on tente d'étudier ses propositions en ce qui concerne le logement (chapitre 2. Après avoir examiné les propositions du texte, on commente quelques erreurs dans l'analyse des faits. Le commentaire final dit: La profusion d'analyses erronées qui visent à mettre en évidence la 'longue marche vers la propriété privée', comme le manque d'analyses spécifiques sur le problème du logement et sur celui de la ville -qui constituent le contexte des informels dans les barriadas-, nous font penser que nous sommes confrontés à un schéma idéologique a priori plus qu'à une étude de la réalité urbaine. El artículo proporciona notas de lectura del libro 'El Otro Sendero' referentes a la producción de vivienda para los sectores de bajos ingresos. Se parte de reconocer la importancia que ha tenido este libro en la audiencia nacional y se intenta estudiar sus proposiciones sobre la vivienda (capítulo 2. Luego de examinar las propuestas presentes en el texto, se comentan algunas incorrecciones en el análisis de los hechos. El comentario final dice: La profusión de análisis erróneos que apuntan a destacar la 'larga marcha hacia la propiedad privada', así como la falta de análisis específicos sobre el problema de la vivienda y el de la ciudad -que constituyen el contexto de los informales en las barriadas-, nos hacen pensar que estamos frente a un esquema ideológico a priori más que frente a un estudio de la realidad urbana. The article consists of interpretative notes on the book 'El Otro Sendero', which refer to the production of housing for low-income sectors. It begins by recognizing the importance this book has had for the national audience, and proposes to examine its propositions about housing (chapter 2. An

  9. Notas sobre la historia de la garza morena ardea cocoi (aves en Colombia

    Directory of Open Access Journals (Sweden)

    José Ignacio Borrero H.

    1982-01-01

    Full Text Available Una revisión de la bibliografía sobre esta especie, demuestra que si bien existe una serie de notas relacionadas con su distribución geográfica, prácticamente nada se ha escrito en relación con sus costumbres, fuera claro está, de comentarios muy generales consignados en manuales sobre faunas regionales.

  10. ANÁLISIS ECONÓMICO DE LA VIOLENCIA EN COLOMBIA. UNA NOTA SOBRE LA LITERATURA

    Directory of Open Access Journals (Sweden)

    Astrid Martínez Ortiz

    2001-06-01

    Full Text Available En esta nota se refieren los enfoques teóricos en economía que pueden ser utilizados como marco de la indagación acerca de las causas de la violencia en Colombia, se relacionan los trabajos recientes de los economistas colombianos, en el marco de dos aproximaciones teóricas, y se formulan las posibles direcciones de la indagación futura.

  11. ¿Para qué leer hoy a Marx? Una nota sobre las nuevas perspectivas

    OpenAIRE

    José Félix Félix Cataño

    2010-01-01

    La enseñanza de la teoría económica marxista es ahora escasa, pocos establecimientos académicos le dan un espacio en su currículo. Con esta nota de reflexión presento algunas razones de este desinterés, ofreciendo las principales justificaciones ideológicas y teóricas para insistir en lo valioso de su estudio y su divulgación.

  12. Notas sobre el género Anetanthus hieron. ex Benth. (Gesneriaceae en Colombia

    Directory of Open Access Journals (Sweden)

    Fernández Alonso José Luis

    1995-06-01

    Full Text Available The distribution in Colombia of Anetanthus (Gesneriaceae at one species with two subspecies in its territory is presented. One of this, new subspecies, is described and illustrated in this note.Se presenta la distribución en Colombia del género Anetanthus (Gesneriaceae, representado en el territorio por una especie con dos subespecies. Una de ellas, subespecie nueva, se describe e ilustra en esta nota.

  13. Ti, Al

    Indian Academy of Sciences (India)

    In the present study, authors report on the effect that substrate bias voltage has on the microstructure and mechanical properties of (Ti, Al)N hard coatings deposited with cathodic arc evaporation (CAE) technique. The coatings were deposited from a Ti0.5Al0.5 powder metallurgical target in a reactive nitrogen atmosphere at ...

  14. Consequências da ingestão moderada de etanol na discriminação de notas musicais

    Directory of Open Access Journals (Sweden)

    Jandilson Avelino da Silva

    2015-03-01

    Full Text Available O objetivo deste estudo foi avaliar se existe relação entre a ingestão moderada de etanol e a discriminação das notas musicais RÉ, FÁ, e LÁ, em adultos jovens. Essas notas apresentam frequências fundamentais respectivamente de 293,665 Hz, 349,228 Hz e 440 Hz, de temperamento igual, escolhidas devido estarem em localização central na escala musical ocidental padrão. Participaram do estudo 40 voluntários de 18 a 29 anos, não músicos, saudáveis, não usuários de fármacos ou outras substâncias tóxicas, exceto o etanol de forma moderada e aguda. Por meio do software"Psysounds", criado especificamente para esse estudo, esses voluntários tiveram de escolher, entre duas notas musicais, uma das notas teste apresentada inicialmente. Os dados foram tratados com um teste X2 de aderência para comparar as frequências de acertos das notas musicais de teste nas condições de ingestão e de não ingestão de álcool. As análises mostraram diferenças significantes nas frequências de acertos para todas as notas utilizadas, sugerindo que a ingestão de etanol prejudica a discriminação das notas musicais RÉ, FÁ e LÁ.

  15. «De mim mesmo sou inimigo»: exílio e saudade na Écloga II de Bernardim Ribeiro

    Directory of Open Access Journals (Sweden)

    Luís André Nepomuceno

    2011-10-01

    Full Text Available Resumo: O presente estudo analisa algumas questões históricas e filosóficas envolvidas na écloga II (“Jano e Franco” de Bernardim Ribeiro, incluída na sua editio princeps publicada em 1554, em Ferrara, por iniciativa de Abraão Usque, judeu português exilado na Itália. Até o séc. XIX, as éclogas tinham sido vistas como poesia de temática romanesca e amorosa, e apenas recentemente identificadas (juntamente com a Menina e moça, romance pastoril do mesmo autor como obra de resistência judaica. Este trabalho pretende identificar as éclogas de Bernardim Ribeiro, em especial a “Jano e Franco”, com as obras consolatórias sefarditas tão em voga na Península Ibérica do séc. XVI, buscando sua identidade literária e política especialmente na Consolação às tribulações de Israel, de Samuel Usque, ou em livros referenciais da cabala, como o Zohar.Palavras-chave: Renascimento português; judaísmo; platonismo. Resumen: El presente estudio analiza algunas cuestiones históricas y filosóficas involucradas en la égloga II (“Jano e Franco” de Bernardim Ribeiro, incluida en su editio princeps publicada en 1554, en Ferrara, por iniciativa de Abraão Usque, portugués judío exiliado en Italia. Hasta el siglo 19, las églogas habían sido vistas como poesía de temática romanesca y amorosa, y sólo recientemente identificadas (juntamente con Menina e moça, romance pastoril del mismo autor como obra de resistencia judaica. Este trabajo pretende identificar las églogas de Bernardim Ribeiro, en especial “Jano e Franco” con la obras consolatorias sefarditas tan en boga en la Península Ibérica del siglo 16, buscando su herencia literaria y política especialmente en Consolação às tribulações de Israel, de Samuel Usque, o en libros referenciales de la cabala, como el Zohar.Palabras-clave: Renacimiento portugués; judaísmo; platonismo.Keywords: Portuguese Renaissance; Judaism; Platonism.

  16. One-step radiosynthesis of {sup 18}F-AlF-NOTA-RGD{sub 2} for tumor angiogenesis PET imaging

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Shuanglong; Liu, Hongguang; Xu, Yingding; Cheng, Zhen [Stanford University, Molecular Imaging Program at Stanford (MIPS), Canary Center at Stanford for Cancer Early Detection, Bio-X Program, Department of Radiology, Stanford, CA (United States); Jiang, Han [Stanford University, Molecular Imaging Program at Stanford (MIPS), Canary Center at Stanford for Cancer Early Detection, Bio-X Program, Department of Radiology, Stanford, CA (United States); Institute of Nuclear Medicine and Molecular Imaging, and the Second Affiliated Hospital of Zhejiang University School of Medicine, Key Laboratory of Medical Molecular Imaging of Zhejiang Province, Department of Nuclear Medicine, Medical PET Center, Hangzhou, Zhejiang (China); Zhang, Hong [Institute of Nuclear Medicine and Molecular Imaging, and the Second Affiliated Hospital of Zhejiang University School of Medicine, Key Laboratory of Medical Molecular Imaging of Zhejiang Province, Department of Nuclear Medicine, Medical PET Center, Hangzhou, Zhejiang (China)

    2011-09-15

    One of the major obstacles of the clinical translation of {sup 18}F-labeled arginine-glycine-aspartic acid (RGD) peptides has been the laborious multistep radiosynthesis. In order to facilitate the application of RGD-based positron emission tomography (PET) probes in the clinical setting we investigated in this study the feasibility of using the chelation reaction between Al{sup 18}F and a macrocyclic chelator-conjugated dimeric RGD peptide as a simple one-step {sup 18}F labeling strategy for development of a PET probe for tumor angiogenesis imaging. Dimeric cyclic peptide E[c(RGDyK)]{sub 2} (RGD{sub 2}) was first conjugated with a macrocyclic chelator, 1,4,7-triazacyclononane-1,4,7-triacetic acid (NOTA), and the resulting bioconjugate NOTA-RGD{sub 2} was then radiofluorinated via Al{sup 18}F intermediate to synthesize {sup 18}F-AlF-NOTA-RGD{sub 2}. Integrin binding affinities of the peptides were assessed by a U87MG cell-based receptor binding assay using {sup 125}I-echistatin as the radioligand. The tumor targeting efficacy and in vivo profile of {sup 18}F-AlF-NOTA-RGD{sub 2} were further evaluated in a subcutaneous U87MG glioblastoma xenograft model by microPET and biodistribution. NOTA-RGD{sub 2} was successfully {sup 18}F-fluorinated with good yield within 40 min using the Al{sup 18}F intermediate. The IC{sub 50} of {sup 19}F-AlF-NOTA-RGD{sub 2} was determined to be 46 {+-} 4.4 nM. Quantitative microPET studies demonstrated that {sup 18}F-AlF-NOTA-RGD{sub 2} showed high tumor uptake, fast clearance from the body, and good tumor to normal organ ratios. NOTA-RGD{sub 2} bioconjugate has been successfully prepared and labeled with Al{sup 18}F in one single step of radiosynthesis. The favorable in vivo performance and the short radiosynthetic route of {sup 18}F-AlF-NOTA-RGD{sub 2} warrant further optimization of the probe and the radiofluorination strategy to accelerate the clinical translation of {sup 18}F-labeled RGD peptides. (orig.)

  17. Descrição da larva de último instar e pupa de Epacroplon cruciatum (Aurivillius (Coleoptera, Cerambycidae, Cerambycinae e notas biológica

    Directory of Open Access Journals (Sweden)

    Juares Fuhrmann

    2012-03-01

    Full Text Available Descrição da larva de último instar e pupa de Epacroplon cruciatum (Aurivillius (Coleoptera, Cerambycidae, Cerambycinae e notas biológicas. Último instar larval e pupa do Hexoplonini sul-americano Epacroplon cruciatum (Aurivillius, 1899 são descritos, ilustrados e disponibilizadas notas biológicas.

  18. Mulheres e homens: diferentes também na percepção das notas musicais?

    Directory of Open Access Journals (Sweden)

    Jandilson Avelino da Silva

    Full Text Available O objetivo deste estudo foi avaliar a percepção das notas musicais RÉ, FÁ, e LÁ em adultos jovens. Participaram do estudo 20 homens e 20 mulheres de 18 a 29 anos, saudáveis, não músicos e não usuários de fármacos ou outras substâncias tóxicas. Realizou-se um teste de discriminação de notas musicais com escolha forçada entre duas alternativas, por meio do qual os participantes escolheram um estímulo previamente apresentado. Comparou-se a frequência de acertos na discriminação das notas musicais em relação ao sexo dos participantes. Encontraram-se diferenças estatisticamente significantes na nota musical Fá, sendo que os homens apresentaram maior quantidade de acertos que as mulheres. Esses resultados encontrados sugerem diferença na percepção das notas musicais para mulheres e homens.

  19. Quantitative analysis and comparison study of [18F]AlF-NOTA-PRGD2, [18F]FPPRGD2 and [68Ga]Ga-NOTA-PRGD2 using a reference tissue model.

    Directory of Open Access Journals (Sweden)

    Ning Guo

    Full Text Available With favorable pharmacokinetics and binding affinity for α(vβ(3 integrin, (18F-labeled dimeric cyclic RGD peptide ([(18F]FPPRGD2 has been intensively used as a PET imaging probe for lesion detection and therapy response monitoring. A recently introduced kit formulation method, which uses an (18F-fluoride-aluminum complex labeled RGD tracer ([(18F]AlF-NOTA-PRGD2, provides a strategy for simplifying the labeling procedure to facilitate clinical translation. Meanwhile, an easy-to-prepare (68Ga-labeled NOTA-PRGD2 has also been reported to have promising properties for imaging integrin α(vβ(3. The purpose of this study is to quantitatively compare the pharmacokinetic parameters of [(18F]FPPRGD2, [(18F]AlF-NOTA-PRGD2, and [(68Ga]Ga-NOTA-PRGD2. U87MG tumor-bearing mice underwent 60-min dynamic PET scans following the injection of three tracers. Kinetic parameters were calculated using Logan graphical analysis with reference tissue. Parametric maps were generated using voxel-level modeling. All three compounds showed high binding potential (Bp(ND = k(3/k(4 in tumor voxels. [(18F]AlF-NOTA-PRGD2 showed comparable Bp(ND value (3.75±0.65 with those of [(18F]FPPRGD2 (3.39±0.84 and [(68Ga]Ga-NOTA-PRGD2 (3.09±0.21 (p>0.05. Little difference was found in volume of distribution (V(T among these three RGD tracers in tumor, liver and muscle. Parametric maps showed similar kinetic parameters for all three tracers. We also demonstrated that the impact of non-specific binding could be eliminated in the kinetic analysis. Consequently, kinetic parameter estimation showed more comparable results among groups than static image analysis. In conclusion, [(18F]AlF-NOTA-PRGD2 and [(68Ga]Ga-NOTA-PRGD2 have comparable pharmacokinetics and quantitative parameters compared to those of [(18F]FPPRGD2. Despite the apparent difference in tumor uptake (%ID/g determined from static images and clearance pattern, the actual specific binding component extrapolated from kinetic

  20. Morphological distinction between estuarine polychaetes: Laeonereis culveri and L. nota (Phyllodocida: Nereididae).

    Science.gov (United States)

    de Jesus-Flores, Citlalli; Salazar-González, S Alejandro; Salazar-Vallejo, Sergio I

    2016-03-01

    The family Nereididae includes more than 500 polychaete species described worldwide, and includes species common in many benthic environments, but some other species may tolerate freshwater or can even thrive in humid substrates in tropical forests. In estuarine environments, nereidid polychaetes can be abundant and relevant as a food source for resident or migratory birds. Laeonereis culveri (Webster, 1879) is a common estuarine species found in tropical and subtropical Atlantic American shores and was described from New Jersey; its median and posterior parapodia have upper notopodial ligules usually longer than the lower ones, and the latter are parallel to the notaciculae throughout the body. L. culveri distribution is from Connecticut to central Argentina; however, this wide distribution might be due to the inclusion of several other species as junior synonyms, despite that some morphological differences were found between them. One of such species is L. nota (Treadwell, 1941), that was described from Texas; its parapodia have notopodial ligules of about the same size, and the lower ones are oblique to the notaciculae. In order to clarify the differences between these two species, and to define which inhabits the Northwestern Caribbean region, topotype materials from these two species and specimens from Chetumal Bay were collected, and their morphological features were compared. Our results indicated that L. culveri and L. nota are different species and that the latter is found in Chetumal Bay. On the basis of mature specimens, L. culveri is hereby restricted to the Northern Gulf of Mexico and Northwestern Atlantic Ocean, and L. nota are reinstated and its distribution extends from Texas, in the Gulf of Mexico to Chetumal Bay, in the Northwestern Caribbean Sea. A key to identify all species in Laeonereis Hartman (1945) is also included.

  1. Notas a la gaviota libertada en el campo, 31 de enero de 1951

    OpenAIRE

    Valverde Gómez, José Antonio, 1926-2003

    2008-01-01

    Notas a la Gaviota reidora (Larus ridibundus) libertada en el campo, cerca del Puente Colgante de Valladolid, el 31 de enero de 1951. Incluye observaciones de patos domésticos y Pavos reales (Pavo cristatus), y un pequeño esquema del enclave observado. Notes to the Common Black-headed Gull (Larus ridibundus) released in the field, near the Puente Colgante of Valladolid, the 31st of January of 1951. Observations of domestic ducks and Indian Peafowls (Pavo cristatus) and a little map of the ...

  2. Melostelis gen. nov., espécies novas e notas complementares sobre Anthidiini (Hymenoptera, Apidae

    Directory of Open Access Journals (Sweden)

    Danúncia Urban

    2011-06-01

    Full Text Available Melostelis gen. nov., espécies novas e notas complementares sobre Anthidiini (Hymenoptera, Apidae. Melostelis gen. nov. é proposto para um novo Anthidiini cleptoparasita. São descritas e ilustradas duas espécies novas: Melostelis amazonensis sp. nov. de Manaus, Amazonas e Larocanthidium chacoense sp. nov. de Porto Murtinho, Mato Grosso do Sul. São dados a conhecer os machos de Epanthidium bolivianum Urban, 1995 e Epanthidium araranguense Urban, 2006 e, registrados pela primeira vez no Brasil, na sub-região do chaco, Ketianthidium zanolae Urban, 2000 e Epanthidium bolivianum.

  3. O positivismo na República (Notas sobre a história do positivismo no Brasil

    Directory of Open Access Journals (Sweden)

    João Cruz Costa

    1953-09-01

    Full Text Available (Primeiro Parágrafo do Artigo Estas ligeiras notas para a história do positivismo no Brasil, constituem uma pequena e modesta contribuição ao estudo das história das idéias do nosso país.

  4. De gevolgen van beleidsmaatregelen uit de Nota Wonen op bewegingsarmoede in Nederland. Onderdeel van de gezondheidseffectrapportage "Mensen wensen gezond wonen"

    NARCIS (Netherlands)

    Wendel-Vos GCW; Schuit AJ; Seidell JC; CZE

    2003-01-01

    Health gains can be achieved by actively combating and decreasing physical inactivity. One of the factors probably influencing physical activity is the living environment. The Policy Document on Housing ('Nota Wonen' in Dutch) presents policy measures influencing the human living environment. The

  5. Mercados de notas estructuradas. Un análisis descriptivo y métodos de evaluación

    Directory of Open Access Journals (Sweden)

    Francisco Venegas-Martínez

    2007-01-01

    Full Text Available El presente trabajo analiza las notas estructuradas más comunes en el mercado. Se presenta una descripción detallada de dichos instrumentos financieros destacando sus características particulares y dificultades técnicas en el proceso de evaluación. Debido a que la mayoría de las notas estructuradas que se negocian en el mercado financiero mexicano son certificados de depósito con garantía del capital inicial, este trabajo proporciona los elementos básicos que se requieren para su evaluación, como son los bonos cuponados flotantes y los productos de las tasas de interés. Asimismo, para la mayoría de las notas estructuradas estudiadas aquí se desarrollan modelos teóricos de evaluación. Por último, con fines ilustrativos, varios ejemplos numéricos acerca de las notas son presentados.

  6. Nota Fiscal Paulista: principais características percebidas pelos cidadãos paulistas

    Directory of Open Access Journals (Sweden)

    Sérgio Roberto da Silva

    2018-03-01

    Full Text Available Estima-se que 60% dos valores de tributos são sonegados pelo varejo (ROLLI e FERNANDES, 2008. Como resposta o governo Paulista criou o projeto NFP-Nota Fiscal Paulista. Nesse projeto a identificação do contribuinte através do CPF gera créditos (benefícios financeiros ao comprador/contribuinte e assegura o pagamento dos tributos por parte do fornecedor/ comerciante. O objetivo deste trabalho foi identificar as  principais características percebidas pelos cidadãos paulistas com relação ao projeto.  A pesquisa envolveu 132 pessoas em um formulário com 25 assertivas no estilo Likert.  Os resultados indicam que os contribuintes aceitam e participam do projeto. No entanto desconhecem outras características do projeto, por exemplo, doação de créditos a instituições filantrópicas. A maior forma de ressarcimento dos créditos é o depósito em conta corrente. Parte dos contribuintes acredita que as informações referentes aos valores de credito não são repassados a Receita Federal. Dessa forma busca-se contribuir com um estudo sob a ótica dos contribuintes em relação a esse projeto.Nota Fiscal Paulista, análise fatorial, sonegação de tributos

  7. Notas de enfermería: una mirada a su calidad

    Directory of Open Access Journals (Sweden)

    Shirley Fernández Aragón

    2016-01-01

    Full Text Available En este escrito se hace una reflexión sobre los conceptos e importancia de las notas de enfermería; muestra que su importancia radica en que favorecen la comunicación entre el equipo interdisciplinario, suministrando una información clara, precisa y detallada del acto de cuidado, para articular el proceso de atención de enfermería. Se expone un reflejo de la realidad en cuanto a la delegación de funciones propias de la profesión, y evidencia la falta de liderazgo y pérdida de autonomía por parte del profesional. Las anotaciones de enfermería son tomadas como el soporte escrito del cuidado brindado en la práctica profesional. Las autoras hacen una invitación a retomar la fundamentación teórica y metodológica de las notas de enfermería y su re-significación, en aras de dar visibilidad y fortalecer el liderazgo y gestión del acto de cuidar.

  8. Comparative Evaluation of Anti-HER2 Affibody Molecules Labeled with 64Cu Using NOTA and NODAGA

    Directory of Open Access Journals (Sweden)

    Vladimir Tolmachev

    2017-01-01

    Full Text Available Imaging using affibody molecules enables discrimination between breast cancer metastases with high and low expression of HER2, making appropriate therapy selection possible. This study aimed to evaluate if the longer half-life of 64Cu (T1/2 = 12.7 h would make 64Cu a superior nuclide compared to 68Ga for PET imaging of HER2 expression using affibody molecules. The synthetic ZHER2:S1 affibody molecule was conjugated with the chelators NOTA or NODAGA and labeled with 64Cu. The tumor-targeting properties of 64Cu-NOTA-ZHER2:S1 and 64Cu-NODAGA-ZHER2:S1 were evaluated and compared with the targeting properties of 68Ga-NODAGA-ZHER2:S1 in mice. Both 64Cu-NOTA-ZHER2:S1 and 64Cu-NODAGA-ZHER2:S1 demonstrated specific targeting of HER2-expressing xenografts. At 2 h after injection of 64Cu-NOTA-ZHER2:S1, 64Cu-NODAGA-ZHER2:S1, and 68Ga-NODAGA-ZHER2:S1, tumor uptakes did not differ significantly. Renal uptake of 64Cu-labeled conjugates was dramatically reduced at 6 and 24 h after injection. Notably, radioactivity uptake concomitantly increased in blood, lung, liver, spleen, and intestines, which resulted in decreased tumor-to-organ ratios compared to 2 h postinjection. Organ uptake was lower for 64Cu-NODAGA-ZHER2:S1. The most probable explanation for this biodistribution pattern was the release and redistribution of renal radiometabolites. In conclusion, monoamide derivatives of NOTA and NODAGA may be suboptimal chelators for radiocopper labeling of anti-HER2 affibody molecules and, possibly, other scaffold proteins with high renal uptake.

  9. (67/68)Ga-labeling agent that liberates (67/68)Ga-NOTA-methionine by lysosomal proteolysis of parental low molecular weight polypeptides to reduce renal radioactivity levels.

    Science.gov (United States)

    Uehara, Tomoya; Rokugawa, Takemi; Kinoshita, Mai; Nemoto, Souki; Fransisco Lazaro, Guerra Gomez; Hanaoka, Hirofumi; Arano, Yasushi

    2014-11-19

    The renal localization of gallium-67 or gallium-68 ((67/68)Ga)-labeled low molecular weight (LMW) probes such as peptides and antibody fragments constitutes a problem in targeted imaging. Wu et al. previously showed that (67)Ga-labeled S-2-(4-isothiocyanatobenzyl)-1,4,7-triazacyclononane-1,4,7-triacetic acid (SCN-Bz-NOTA)-conjugated methionine ((67)Ga-NOTA-Met) was rapidly excreted from the kidney in urine following lysosomal proteolysis of the parental (67)Ga-NOTA-Bz-SCN-disulfide-stabilized Fv fragment (Bioconjugate Chem., (1997) 8, 365-369). In the present study, a new (67/68)Ga-labeling reagent for LMW probes that liberates (67/68)Ga-NOTA-Met was designed, synthesized, and evaluated using longer-lived (67)Ga in order to reduce renal radioactivity levels. We employed a methionine-isoleucine (MI) dipeptide bond as the cleavable linkage. The amine residue of MI was coupled with SCN-Bz-NOTA for (67)Ga-labeling, while the carboxylic acid residue of MI was derivatized to maleimide for antibody conjugation in order to synthesize NOTA-MI-Mal. A Fab fragment of the anti-Her2 antibody was thiolated with iminothiolane, and NOTA-MI-Mal was conjugated with the antibody fragment by maleimide-thiol chemistry. The Fab fragment was also conjugated with SCN-Bz-NOTA (NOTA-Fab) for comparison. (67)Ga-NOTA-MI-Fab was obtained at radiochemical yields of over 95% and was stable in murine serum for 24 h. In the biodistribution study using normal mice, (67)Ga-NOTA-MI-Fab registered significantly lower renal radioactivity levels from 1 to 6 h postinjection than those of (67)Ga-NOTA-Fab. An analysis of urine samples obtained 6 h after the injection of (67)Ga-NOTA-MI-Fab showed that the majority of radioactivity was excreted as (67)Ga-NOTA-Met. In the biodistribution study using tumor-bearing mice, the tumor to kidney ratios of (67)Ga-NOTA-MI-Fab were 4 times higher (6 h postinjection) than those of (67)Ga-NOTA-Fab. Although further studies including the structure of radiometabolites and

  10. Proposta de Melhoria do Processo de Contratação de Serviços de TI e da Gestão dos Contratos na Administração Pública Federal

    Directory of Open Access Journals (Sweden)

    José Gonçalo dos Santos

    2013-06-01

    Full Text Available Este trabalho se baseou numa análise exploratória com objetivo de analisar e mapear os processos de contratação de serviços de TI na Administração Pública Federal, tomando como base o Ministério da Ciência, Tecnologia e Inovação – MCTI, com uso das técnicas de modelagem de processos baseados na notação BPMN. Inicialmente, foi feita a modelagem dos processos atuais (AS-IS, e em seguida foi feita uma análise dos resultados. O trabalho foi feito com base na análise da IN 02/2010, Lei 10520/2002 e Lei 8666/1993. Com base nesta análise, os processos atuais foram mapeados. Os principais objetivos foram: identificar os processos de contratação de serviços de TI que estão relacionados com os projetos do órgão; analisar os processos de contratação de serviços de TI; modelar os processos de contratação de serviços de TI com notação BPMN; identificar os processos críticos de contratação de serviços de TI e propor melhorias.

  11. Safety, Dosimetry, and Tumor Detection Ability of 68Ga-NOTA-AE105

    DEFF Research Database (Denmark)

    Skovgaard Lund, Dorthe; Persson, Morten; Brandt-Larsen, Malene

    2017-01-01

    The overexpression of urokinase-type plasminogen activator receptors (uPARs) represents an established biomarker for aggressiveness in most common malignant diseases, including breast cancer (BC), prostate cancer (PC), and urinary bladder cancer (UBC), and is therefore an important target for new...... cancer therapeutic and diagnostic strategies. In this study, uPAR PET imaging using a68Ga-labeled version of the uPAR-targeting peptide (AE105) was investigated in a group of patients with BC, PC, and UBC. The aim of this first-in-human, phase I clinical trial was to investigate the safety.......Conclusion:This first-in-human, phase I clinical trial demonstrates the safe use and clinical potential of68Ga-NOTA-AE105 as a new radioligand for uPAR PET imaging in cancer patients....

  12. Reuniones, dispersiones. Notas sobre ideas literarias de Tomás Segovia

    Directory of Open Access Journals (Sweden)

    Juan Pascual Gay

    2014-01-01

    Full Text Available Este artículo quiere dar cuenta de diferentes ideas expuestas por Tomás Segovia a lo largo de su oficio de escritor en ensayos, cuadernos de notas y entrevistas. Segovia no desarrolló un pensamiento unitario y sistemático, sino que, más bien, desarrolla esas ideas en diferentes contextos, textos y pretextos, pero esas ideas acaban por volver siem - pre a un ideario que otorga una cohesión insospechada en su obra. Además, muchas veces, sin decirlo, deja entrever la tradición literaria y cultural a la que se adscribe y que permea su obra entera.

  13. Educação e Zen Budismo: notas para aprender o Satori

    Directory of Open Access Journals (Sweden)

    Deniz Alcione Nicolay

    2012-03-01

    Full Text Available Esse texto procura se afastar do modelo das certezas absolutas para reivindicar a dúvida perene. Utiliza a filosofia Zen na intenção de provocar um verdadeiro abalo na forma de pensar em educação. Uma vertigem, portanto, perpassa tal encontro, pois nenhum pré-conceito pode permanecer exatamente o mesmo depois de tocado pela poesia Zen. Nesse sentido, aprender e ensinar ganham novo rumo: o rumo do Satori. E, para isso, os velhos monges ensinam as técnicas do mondo, do koan e do za-zen, ou seja, como estímulo para o discípulo alcançar sua iluminação particular. Mas até mesmo essas técnicas são inebriadas de uma lógica do absurdo, de um humor vitalista, de um “vire-se, se puderes!”. Mesmo nos momentos mais difíceis, os monges ensinam que para vencer é preciso estar só.

  14. Notas sobre la Flora de Colombia y países vecinos, III

    Directory of Open Access Journals (Sweden)

    Dugand Armando

    1969-06-01

    Full Text Available Continuación (parte III de la nueva serie de notas botánicas iniciada hace tres años en Phytologia (vol. 13, no. 6: 379-400. 1966, y cuya segunda parte se publicó recientemente en Caldasia (vol, 10, no. 47: 173-213. 1968, relativas en su mayor parte a la flora xerófila y subxerófila de la región costera del Caribe en Colombia y países vecinos, particularmente Venezuela.  En ellas se hacen observaciones sobre la taxonomía, nomenclatura, morfología, distribución geográfica, hábitat, y otras varias, de las siguientes plantas: ASCLEPIADACEAE Matelea albiflra (Karst. Dugand. BIGNONIACEAE Anemopaegma chrysoleucum. (Kth. in H. & B. Sandw. # Arrabidaea candicans (L. C. Rich. DC. Arrabidaea conjugata (VeIl. Mart. ex DC. Arrabidaea florida DC. # Arrabidaea pleei DC. Clytostoma cuneatum Dugand. Clytostoma pterocalyx Spr. ex Urb. # Onohualcoa helicocalyx (O. Kze. Sandw. Phryganocydia uliginosa Dugand. Romeroa verticillata Dugand. # Roseodendron chryseum. (Blake Miranda. Tabebuia dugandii StandI. BOMBACACEAE Pseudobombax maximum A. Robyns. LEGUMINOSAE·FABOIDEAE Uribea tamarindoides Dugand & Romero. RUBIACEAE Guettarda eliadis StandI. Sickingia klugei StandI. Tal vez con la sola excepción de Arrabidaea florida DC., de cuya existencia en Colombia no hay -que yo sepa- ninguna información anterior (a menos que la colección original sea realmente del Caquetá colombiano como bien pudiera serlo, véase nota al pie de la página respectiva en este trabajo , todas las especies enumeradas arriba ya han sido catalogadas antes en la flora de este pais, ora con el mismo nombre con que figuran en la Iista, ora con otro que ha caido en desuso necesario o se considera sinonimo del que se da aqui. Las de este ultimo grupo se seiialan con el signo #.

  15. O professor_: de quem estamos falando mesmo?

    Directory of Open Access Journals (Sweden)

    Santos, Fabiane Konowaluk

    2004-01-01

    Full Text Available O presente texto procura abordar a temática relacionada à auto-imagem do professor, constatada através de uma enquete e da construção de um website que subsidiou o tensionamento com o real. Segundo Arroyo (2000, p. 124, “carregamos a função que exercemos, que somos e a imagem de professor(a que internalizamos”. Dessa forma, o tema em estudo segue, ainda hoje, sendo altamente significativo, pois não podemos esquecer os momentos históricos, políticos e sociais vivenciados pelos professores, buscando justamente explicações sobre como as questões de auto-imagem, o fazer e suas competências, suas possibilidades e limites e outros tantos fatores que estão a alterar seu comportamento. Arroyo (2000, p. 124 assinala que a auto-imagem docente é apreendida em múltiplos espaços e tempos, em múltiplas vivências, como resultado das condições psicológicas e sociais que afetam sua docência

  16. AMTB CHILE. INFORME TÉCNICO INACAP TEMUCO 2008: MOTIVACIÓN Y NOTAS EN INGLÉS

    Directory of Open Access Journals (Sweden)

    María Soledad Soza Roldán

    2013-01-01

    Full Text Available La siguiente investigación trata la motivación como factor que impacta en el aprendizaje de inglés (notas en estudiantes de pregrado de Inacap Temuco, Región de la Araucanía, Chile. Para este fin, se aplicó el cuestionario AMTB (Test de Actitud y Motivación a una muestra de 305 estudiantes de carreras técnicas en Inacap Temuco (2008 para determinar el nivel de motivación según 12 variables del modelo socio-educacional de R C Gardner que sirve de paradigma en SLA (adquisición de un segundo idioma. Los hallazgos indican que la motivación explica el 41% de la nota; la ansiedad, deseo por aprender Inglés, intensidad de la motivación, el estímulo de los padres, y las actitudes frente al proceso de enseñanza tienen correlación significativa con las notas (95% de confianza. Se realizó un análisis descriptivo de las notas en Inglés desde otoño /primavera 2002 a otoño/primavera 2007 por nivel y promedio total (nivel I a VII. Se determinó que nivel promedio general de motivación es de un moderado 4.3 (escala Likert de 1 a 6 pero se dispara a 5.9 en el nivel VII permitiendo apreciar una correlación serial positiva desde el nivel I al VII. Los hallazgos son similares a los descubiertos por Gardner en Canadá (1960 y en 4 países europeos (1985. Los hallazgos fueron enviados a Gardner cuyos comentarios se detallan en el Informe.

  17. Nota sobre colisiones de aves en las ventanas de edificios universitarios en Puerto Vallarta, México

    Directory of Open Access Journals (Sweden)

    Fabio Germán Cupul-Magaña

    2015-06-01

    Full Text Available Esta nota presenta las observaciones de 15 colisiones de aves en ventanas de edificios de la Universidad de Guadalajara en Puerto Vallarta, Jalisco, México, a lo largo de 94 días de estudio (24 de enero al 27 de abril del 2003. Columbina passerina fue la especie que presentó el mayor número de fatalidades: ocho.

  18. Trabajar los géneros discursivos en clase de E/LE: la nota crítica

    Directory of Open Access Journals (Sweden)

    Eduardo España Palop

    2013-01-01

    Full Text Available El trabajo con géneros discursivos es esencial para adquirir una correcta competencia comunicativa. Mediante la secuencia didáctica que aquí se presenta, los alumnos adquirirán las principales herramientas para construir notas críticas, a la vez que trabajarán aspectos de la lengua española que les permitirán incrementar su competencia lectora y escrita.

  19. NOTA EDITORIAL

    Directory of Open Access Journals (Sweden)

    Mario Camacho Pinto

    1985-04-01

    Full Text Available


    RESOLUCIÓN


    La Presidencia de la Academia Nacional de Medicina, resuelve cambiar y darle una nueva organización a las publicaciones de la institución en la siguiente forma:

    1o. Créase el Consejo Editorial compuesto por la Comisión Permanente de Biblioteca y Publicaciones integrada actualmente por los Académicos Mario Camacho Pinto, Juan Di Doménico, Juan Mendoza-Yega, Alvaro López Pardo y Fernando Serpa Flórez.

    2o. Se crean los cargos de Editores y se designó como Editor al Académico Mario Camacho Pinto y Coeditor al Académico Alberto Albornoz Plata; y como Editor Asociado al señor Alfonso Yelasco, de la Editorial Catálogo Científico.

    3o. Se crea la sección de Editores Asistentes, la cual estará constituida por un grupo de especialistas de las distintas ramas de la medicina representadas en la Academia, estos Editores Asistentes serán nombrados por la Junta Directiva. La misión principal del Editor Mario Camacho Pinto consistirá, además de coordinar las actividades del Consejo Editorial, la de decidir con el Coeditor y el Editor Asociado las publicaciones definitivas que se hayan seleccionado para los Anales. Los Editores Asistentes tendrán como misión especial la revisión de los trabajos científicos que se presenten a la Academia y darles el visto bueno para su publicación en los Anales...

  20. Nota Editorial

    Directory of Open Access Journals (Sweden)

    Carlos E. Sarmiento

    2016-07-01

    Full Text Available Luego de más de tres lustros de intensa labor, J. Orlando Rangel-Ch. entrega su trabajo como editor general de Caldasia y ofrece una revista con un registro impecable de regularidad, excelentes indicadores bibliométricos nacionales y el ingreso a varias de las bases de datos más importantes en el ámbito de las publicaciones científicas. Nuestro anterior editor afrontó y supo desarrollar apropiadamente la revista ante los retos que han significado las variantes políticas nacionales de ciencia y tecnología y ha dado la continuidad propia de quienes entienden que las ciencias se consolidan mediante políticas estables que faciliten la actividad científica. Agradezco en nombre propio y de quienes han estado asociados a Caldasia la labor desarrollada por J. Orlando Rangel-Ch. Tales retos no han terminado, y como es conocido por la comunidad académica nacional, los estándares de evaluación de las publicaciones científicas nacionales van a cambiar de nuevo. Al igual que nuestro anterior editor, afrontaremos estos cambios con la mejor disposición, aunque también con la claridad de que tales políticas son un complemento en las labores centrales de una revista que busca establecerse en los primeros renglones de la comunidad científica nacional e internacional.

  1. Nota jurisprudencial

    Directory of Open Access Journals (Sweden)

    Miquel Peguera Poch

    2006-11-01

    Full Text Available

    e l'entrada en vigor de la Llei 34/2002, d'11 de juliol, de serveis de la societat de la informació i de comerç electrònic (LSSICE, han estat poques les resolucions judicials que han abordat d'alguna manera el problema de la responsabilitat dels prestadors de serveis d'intermediació per continguts il·lícits de tercers. La LSSICE dedica els articles 13 a 17 a aquesta qüestió, incorporant, per a les activitats de mera transmissió de dades, de còpia de materials en memòria cau o cache i d'allotjament o hosting, les regles d'exempció de responsabilitat establertes en la Directiva 2000/31/CE sobre el comerç electrònic. La LSSICE afegeix a més una altra exempció, no prevista en la Directiva, per a la provisió d'enllaços i instruments de recerca.
    En aquest número d'IDP volem destacar dues resolucions sobre aquesta matèria. La primera és l'Acte de 10 de novembre de 2004, del Jutjat Mercantil núm. 2 de Madrid (ponent: PEDRO MARÍA GÓMEZ SÁNCHEZ [Diari La Ley, número 6186, dimecres, 9 de febrer de 2005]. La segona resolució és la Sentència de 15 de juny de 2005, del Jutjat de Primera Instància núm. 42 de Madrid (ponent: EDUARDO DELGADO HERNÁNDEZ.

  2. Nota editorial

    Directory of Open Access Journals (Sweden)

    Facultad de Medicina Revista

    1940-07-01

    Full Text Available Comienzan con este número de la Revista de la Facultad de Medicina las funciones de sus recién nombrados redactores, y como siempre que nuevos hombres ingresan en cualquier empresas, el entusiasmo que el honor ha prestado a los médicos nombrados, se ha traducido en ciertos detalles de reforma al tipo de impresión, a la selección del material, etc.

  3. NOTA EDITORIAL

    OpenAIRE

    Armando Cuesta Santos

    2009-01-01

    En este número de la revista Ingeniería Industrial: gestión del conocimiento respecto a procesos de dirección, comunicación organizacional, estrategias logísticas, redes de cooperación en el desarrollo local, planificación de la calidad, mejora de procesos, modelado de procesos (mejoramiento de flujos de trabajo...

  4. NOTA EDITORIAL

    Directory of Open Access Journals (Sweden)

    Armando Cuesta Santos

    2009-05-01

    Full Text Available

    Los procesos de trabajo atraviesan a todas las funciones de la gestión empresarial u organizacional en esta contemporaneidad. Hoy son la expresión mayor de la transdisciplinariedad comprendida por la actividad científica que es la Ingeniería Industrial, que desde su génesis se manifestara con un enfoque interdisciplinario mediante los estudios de métodos y tiempos de trabajo que realizara F. W. Taylor conformando su Scientific Management.

  5. NOTA EDITORIAL

    Directory of Open Access Journals (Sweden)

    Armando Cuesta Santos

    2008-11-01

    Full Text Available

    Se promulgó a fines del año 2007 el Decreto Ley No. 252 “Sobre la Continuidad y el Fortalecimiento del Sistema de Dirección y Gestión Empresarial Cubano”, que significa la continuidad del Proceso de Perfeccionamiento Empresarial en Cuba. Su impacto, que es estratégico para nuestra gestión empresarial, también lo es para el accionar de especialistas, investigadores, profesores, y profesionales en general dedicados a la gestión empresarial en el país.

  6. Nota editorial

    Directory of Open Access Journals (Sweden)

    Montes Vides Luis Alfredo

    2003-08-01

    Full Text Available

    En el trasegar de las actividades cotidianas, con frecuencia olvidamos los esfuerzos que hemos llevado a cabo en la realización de las mismas, solo cuando volvemos la vista al camino andado y confrontamos los desafíos que se tenían y las metas conseguidas, percibimos la incertidumbre ante la empresa y las satisfacciones de los logros.

    Henos un año después, nuevamente aquí, con la publicación del séptimo número de la revista Geofísica Colombiana, en la cual, con gran tesón y mediante el esfuerzo encomiable de investigadores latinoamericanos de las ciencias de la tierra, presentamos a la comunidad científica los resultados de investigaciones en los campos de la geofísica.

    Coincide esta ocasión con los cinco años de reapertura del programa de maestría en geofísica en la Universidad Nacional de Colombia, en su sede Bogotá, labor que se ha visto fructificada con una nueva promoción de egresados de este programa de estudios avanzados, que con certeza va a redundar en el devenir de un mayor desarrollo de esta rama del saber en beneficio de la nación colombiana.

  7. Nota Editorial

    Directory of Open Access Journals (Sweden)

    Consejo Editorial Maestro y Sociedad

    2016-11-01

    Full Text Available La Revista Maestro y Sociedad de la Universidad de Oriente ha decidido publicar este segundo número especial, donde se incluyen los artículos más destacados presentados en el III Taller Científico “Orientación educativa y desarrollo humano”, que se desarrolló en mayo del 2016 por el Centro de Estudios Pedagógicos Juan Bautista Sagarra Blez de la Facultad de Educación Infantil en la Universidad de Oriente. En este evento se socializaron resultados de investigaciones educativas, así como experiencias científico-metodológicas y pedagógicas desarrolladas por la comunidad científica de esta institución y del territorio, relacionadas con el papel de la orientación educativa como función esencial de los educadores en la formación y desarrollo de la personalidad de niños, adolescentes, jóvenes y adultos, en relación con las transformaciones y exigencias de la contemporaneidad.

  8. NOTA EDITORIAL

    Directory of Open Access Journals (Sweden)

    Armando Cuesta Santos

    2010-11-01

    Full Text Available

    En el primer artículo de este nuevo número de la revista Ingeniería Industrial, la investigación conduce a realizar un análisis previo a la optimización concreta de problemas reales de enrutamiento. En el siguiente se refleja una investigación relativa a los sistemas de gestión del capital humano por competencias en empresas de mantenimiento; y en el artículo que continúa, se establecen las mejores alternativas sobre las cuales debe basarse la decisión, en un proyecto dirigido a dar respuesta al creciente mercado de neumáticos.

  9. NOTA EDITORIAL

    Directory of Open Access Journals (Sweden)

    Armando Cuesta Santos

    2011-03-01

    Full Text Available Este nuevo número de la revista está dedicado esencialmente al diseño, en sus diferentes manifestaciones. Comprende diseños para el desarrollo del diagnóstico, el establecimiento de métodos, y de sistemas, asociados aquí indistintamente a dos vertientes fundamentales: sistemas de calidad y de gestión de la seguridad y la salud. Se inicia con un artículo sobre el diagnóstico del clima laboral en una empresa de la industria médico farmacéutica, teniendo por objetivo la determinación de las variables que inciden negativamente sobre la percepción acerca de la calidad del trabajo que realizan las personas y la actitud que asumen al respecto. Un segundo trabajo trata la ergonomía y la simulación aplicadas a la industria, con la finalidad de mostrar el impacto de los rediseños ergonómicos realizados a estaciones de trabajo. En un tercer artículo se expone una interpretación, a través de una metodología en los proyectos de desarrollo de software, del requisito ISO para el diseño.

  10. NOTA EDITORIAL

    Directory of Open Access Journals (Sweden)

    Mario Camacho Pinto

    1985-08-01

    Full Text Available

    Vigencia de la tradición.

    A propósito del cambio en la presentación de la portada de MEDICINA hacemos un comentario de tipo periodístico, ya que afrontamos varios aspectos que tanto por las Directivas de la Academia como por el Consejo Editorial fueron cuidadosamente analizados antes de tomar esta determinación. Sea el primero de ellos el de buscar para la Revista una identidad fiel y estable, trasunto representativo de su función académica de informar sobre la actividad que se mueve en su seno y que comprende las inquietudes de sus Directivas y miembros, traducidas en iniciativas y trabajos científicos propios u ocasionalmente también solicitados o aceptados a colaboradores notables, con la finalidad de estimular la calidad, altura y variedad para nuestra publicación.

    Otro aspecto de esa identidad no atañe el patrimonio científico y cultural, sino a la presentación, puesto que se consideró en las deliberaciones que la revista de la Academia Nacional de Medicina debe mostrar definidamente algo de la majestad inherente a su categoría auténticamente nacional que exige culto a la tradición ecuménica representada en este caso por el emblema de Esculapio y a la vez a la historia vernácula representada simbólicamente aquí. En primer lugar, por MEDICINA que es la continuidad de la original REVISTA MEDICA existente en el siglo pasado, a la sazón publicación periódica de la sociedad de MEDICINA Y CIENCIAS NATURALES cuando fue promulgada la Ley 71 de 1890 que la convirtió, por acuerdo y voluntad del Gobierno Nacional de esa época y de los siguientes, en ACADEMIA NACIONAL DE MEDICINA DE COLOMBIA Y cuyo artículo 70. reza así..."LA REVISTA MEDICA será el periódico oficial de la Academia"; y en segundo lugar por la diagramación interior ilustrada ahora con diseños de nuestro arte precolombino, cultura Tumaco para esta edición.

    Más aspectos comentables son los referibles a la en algo o en mucho ingenua aspiración de que MEDICINA pueda abrirse paso hacia el resto del mundo médico, poco a poco en busca de un equilibrio adecuado a nuestra contextura potencial y a nuestra vocación democrática. Esta por ahora imaginativa prospección, tiene algún fundamento en la compartida decisión de nuestro Presidente de elevar el tiraje a 8.000 ejemplares cuatro veces al año, sus páginas a un número promedio de 70, distribución internacional por medio de los consulados o embajadas y dos nuevas secciones de orden informativo y consistentes la una en resúmenes actualizados de los recientes adelantos médicos mundiales gracias a la colaboración de la Biblioteca Nacional de Washington, a través de un terminal de cumputador, y la otra sobre actividades nacionales en el ramo de la Salud por un acuerdo con el Ministerio.

    Acogimos el emblema de Esculapio porque se compagina mejor con lo anteriormente esbozado, ya que la más vistosa alternativa del Caduceo o heraldo, del bastón con dos alas extendidas y dos serpientes entrelazadas, fue símbolo de mercaderes en el Siglo XVI y solamente en 1856 el Hospital de la Marina de U.S.A, antecesor de la salubridad oficial actual, consideró que el Caduceo sería un buen sím bolo para significar el carácter no combatiente de la clase médica, aceptándose en 1902 por el cuerpo médico de ese país en sustitución de la cruz de San Juan. En cambio el emblema de Esculapio que adorna nuestra portada, fue médico desde la antigüedad habiendo hecho aparición unos 800 años a. de J.C. como símbolo del dios de la Medicina, Asklepio para los griegos y Aesculapius para los romanos. Actualmente es emblema del cuerpo médico del ejército de muchos países y de corporaciones civiles mayores como la American Medical Association 1912 y la Organización Mundial de la Salud desde su fundación en 1947.

    MEDICINA renueva la formal invitación a todos los Académicos a colaborar sin reservas, unidos para beneficio común.

  11. Notas editoriales

    Directory of Open Access Journals (Sweden)

    Andrea Lampis

    2017-07-01

    Full Text Available El número dedicado a Trabajos en la globalización: sus sujetos y sus conflictos en América Latina nos remite a realizar balances y prospectivas de más de cuatro décadas de globalización neoliberal que transformaron cabalmente el mundo del trabajo y que, aunque no haya quedado como un proceso irreversible, dejó claras huellas en los sujetos laborales, la acción colectiva y los modelos productivos. Así mismo, en los tres últimos lustros se ha evidenciado en algunos países el retroceso del rumbo marcado por las reformas neoliberales hegemónicas de los años noventa, lo que ha dado lugar a procesos de reactivación y reestructuración económica que, al mismo tiempo, conllevaron al fortalecimiento de las instituciones laborales. Actualmente dichos procesos están siendo cuestionados con el retorno al neoliberalismo, justamente en los países que habían buscado abandonarlo. En concordancia con el tema central, hemos seleccionado doce artículos, agrupados en tres ejes temáticos muy debatidos en los estudios del trabajo en América Latina, como son la precariedad, el trabajo leído desde la perspectiva de género, y la acción colectiva que forman los sujetos del mundo del trabajo.

  12. Nos transformamos em brancos: notas sobre a cosmopolítica Mbya Guarani

    Directory of Open Access Journals (Sweden)

    Vicente Cretton Pereira

    2017-09-01

    Full Text Available A partir de alguns contextos específicos de interação com os brancos (jurua procuro investigar no presente trabalho como a cosmopolítica mbya está orientada. A partir de um irônico comentário de uma xamã mbya sobre sua (e de seu grupo transformação corporal em brancos(as, busco entender as relações com o jurua como formas que os Mbya arranjam de experimentar um mundo que os ultrapassa e que, por isso mesmo, desperta seu desejo de modos diversos. Durante encontros lúdicos os Mbya estabeleciam certos laços com os brancos que podem resultar até mesmo em casamento, contudo a tensão que caracteriza a relação com o Outro algumas vezes é resolvida através da guerra ou de tentativas de familiarização.

  13. Notas sobre linguagem, texto e pesquisa histórica em educação

    Directory of Open Access Journals (Sweden)

    Maria do Rosário Longo Mortatti

    2012-06-01

    Full Text Available  Com o objetivo de contribuir para a discussão acerca dos problemas e possibilidades da pesquisa histórica em educação, apresentam-se nestas notas, com base na concepção interacionista de linguagem, reflexões problematizadoras sobre as relações entre as atividades de leitura e produção de textos e os processos: de recuperação, reunião, seleção e análise de fontes documentais escritas; de produção do texto final (monografia, dissertação ou tese em que se materializa discursivamente o objeto de investigação; e de constituição do sujeito desse discurso.Palavras-chave: linguagem, texto, pesquisa histórica em educação.   Abstract In order to contribute for the discussion on problems and possibilities of the historical research in education, it is shown in this text, based upon a linguistic interactional conception, reflexions about relations among the activities of reading and writing texts and the process of: recovering, reuniting, selecting and analyzing documental sources; producing the final text; and constituting the discours subject. Keywords: language, text, historical research in education. 

  14. Uma Nota sobre o Impacto da Corrupção no Endividamento dos Estados Brasileiros

    Directory of Open Access Journals (Sweden)

    Paulo Matos

    Full Text Available Esta nota agrega à discussão sobre as finanças públicas dos estados brasileiros, atendo-se à pela fragilidade fiscal e corrupção crescente. Propõe-se a estimação de três distintas abordagens utilizadas na literatura internacional com o intuito de mensurar o impacto do Índice de Corrupção Governamental na Dívida Consolidada Líquida como razão do Produto Interno Bruto desses entes federativos. A elasticidade-corrupção do endividamento é significativo a 1% e oscila entre 0,015 e 0,020. O exercício empírico aqui sugerido permite ainda inferir que a redução do endividamento nos estados através do combate à corrupção é mais eficiente se aliado à austeridade fiscal do que quando combinado com demais políticas econômicas.

  15. Interference of age and repetition of the same noxious stimulus on hyperalgesia Interferência da idade e repetição do mesmo estímulo doloroso na hiperalgesia

    Directory of Open Access Journals (Sweden)

    Jose F. Ibañez

    2010-09-01

    : avaliar se a resposta a um estímulo doloroso difere em diferentes fases da vida e se a repetição de um mesmo estímulo doloroso agudo no mesmo animal interfere na expressão da hiperalgesia. Assim, 60 ratos foram selecionados e agrupados em três grupos iguais: 3 meses, 6 meses e 9 meses. Foi injetada solução de formalina 5% na face plantar de todos os animais durante anesthesia. O limiar de hiperalgesia foi testado pelo método de filamentos de Von Frey à 1h, 24h e 48h após a sensibilização. A injecão foi repetida duas vezes com intervalo de 30 dias, uma vez em cada membro. Os resultados demosntraram que animais mais jovens possuem limiares menores de hiperalgesia na primeira estimulação, comparados com os mais velhos e que a repetição de um mesmo estímulo doloroso agudo diminui o limiar de hiperalgesia quando o primeiro estímulo ocorre nas idades mais tenras e aumenta o limiar quando se inicia em idades mais avançadas.

  16. Integration of cooking and vacuum cooling of carrots in a same vessel Integração dos processos de cozimento e resfriamento a vácuo de cenouras em um mesmo tanque

    Directory of Open Access Journals (Sweden)

    Luiz Gustavo Gonçalves Rodrigues

    2012-03-01

    Full Text Available Cooked vegetables are commonly used in the preparation of ready-to-eat foods. The integration of cooking and cooling of carrots and vacuum cooling in a single vessel is described in this paper. The combination of different methods of cooking and vacuum cooling was investigated. Integrated processes of cooking and vacuum cooling in a same vessel enabled obtaining cooked and cooled carrots at the final temperature of 10 ºC, which is adequate for preparing ready-to-eat foods safely. When cooking and cooling steps were performed with the samples immersed in boiling water, the effective weight loss was approximately 3.6%. When the cooking step was performed with the samples in boiling water or steamed, and the vacuum cooling was applied after draining the boiling water, water loss ranged between 15 and 20%, which caused changes in the product texture. This problem can be solved with rehydration using a small amount of sterile cold water. The instrumental textural properties of carrots samples rehydrated at both vacuum and atmospheric conditions were very similar. Therefore, the integrated process of cooking and vacuum cooling of carrots in a single vessel is a feasible alternative for processing such kind of foods.Para a preparação de refeições rápidas é comum o uso de legumes cozidos. A integração dos processos de cozimento e resfriamento de cenouras em um mesmo tanque pelo uso do resfriamento a vácuo é descrito neste artigo. A combinação de diferentes métodos de cozimento e resfriamento a vácuo foi investigada. O processo integrado de cozimento-resfriamento a vácuo em um mesmo tanque permitiu obter cenouras cozidas-resfriadas com temperaturas finais de 10 ºC, o que é adequado à preparação de refeições rápidas com segurança. Quando o processo de cozimento-resfriamento foi realizado com amostras imersas em água de cozimento, a perda efetiva de massa foi de aproximadamente 3,6%. Quando o processo de cozimento-resfriamento foi

  17. Nota sobre una propuesta de traducción de rótulos del Alfabeto Fonético Internacional

    Directory of Open Access Journals (Sweden)

    Perry Carrasco Roberto Alfredo

    2008-06-01

    Full Text Available Esta nota propone traducciones para algunos de los rótulos usados para las categorías fonéticas del Alfabeto Fonético Internacional. La introducción del texto plantea la temática de la nota; la segunda sección argumenta sobre cuál es el fundamento natural de los criterios con que se eligen tales rótulos; la tercera sección argumenta en defensa de algunas opciones y la cuarta y última discute algunos rótulos para los llamados símbolos diacríticos.

  18. In vitro and in vivo evaluation of a (18F-labeled high affinity NOTA conjugated bombesin antagonist as a PET ligand for GRPR-targeted tumor imaging.

    Directory of Open Access Journals (Sweden)

    Zohreh Varasteh

    Full Text Available Expression of the gastrin-releasing peptide receptor (GRPR in prostate cancer suggests that this receptor can be used as a potential molecular target to visualize and treat these tumors. We have previously investigated an antagonist analog of bombesin (D-Phe-Gln-Trp-Ala-Val-Gly-His-Sta-Leu-NH2, RM26 conjugated to 1,4,7-triazacyclononane-N,N',N''-triacetic acid (NOTA via a diethylene glycol (PEG2 spacer (NOTA-P2-RM26 labeled with (68Ga and (111In. We found that this conjugate has favorable properties for in vivo imaging of GRPR-expression. The focus of this study was to develop a (18F-labelled PET agent to visualize GRPR. NOTA-P2-RM26 was labeled with (18F using aluminum-fluoride chelation. Stability, in vitro binding specificity and cellular processing tests were performed. The inhibition efficiency (IC50 of the [(natF]AlF-NOTA-P2-RM26 was compared to that of the (natGa-loaded peptide using (125I-Tyr(4-BBN as the displacement radioligand. The pharmacokinetics and in vivo binding specificity of the compound were studied. NOTA-P2-RM26 was labeled with (18F within 1 h (60-65% decay corrected radiochemical yield, 55 GBq/µmol. The radiopeptide was stable in murine serum and showed high specific binding to PC-3 cells. [(natF]AlF-NOTA-P2-RM26 showed a low nanomolar inhibition efficiency (IC50=4.4±0.8 nM. The internalization rate of the tracer was low. Less than 14% of the cell-bound radioactivity was internalized after 4 h. The biodistribution of [(18F]AlF-NOTA-P2-RM26 demonstrated rapid blood clearance, low liver uptake and low kidney retention. The tumor uptake at 3 h p.i. was 5.5±0.7 %ID/g, and the tumor-to-blood, -muscle and -bone ratios were 87±42, 159±47, 38±16, respectively. The uptake in tumors, pancreas and other GRPR-expressing organs was significantly reduced when excess amount of non-labeled peptide was co-injected. The low uptake in bone suggests a high in vivo stability of the Al-F bond. High contrast PET image was obtained 3 h p

  19. O lado de dentro da experiência: atenção a si mesmo e produção de subjetividade numa oficina de cerâmica para pessoas com deficiência visual adquirida

    Directory of Open Access Journals (Sweden)

    Virgínia Kastrup

    Full Text Available Pessoas acometidas pela perda da visão são confrontadas com a necessidade de reorganização de seu sistema cognitivo e de reinvenção de suas vidas. O objetivo deste texto é discutir os efeitos da experiência de trabalhar com cerâmica, analisando os dois lados do funcionamento da atenção de pessoas com deficiência visual adquirida: a atenção à argila e a atenção a si mesmo durante o processo de criação. Toma como referências principais os trabalhos de J. Dewey sobre experiência estética, de G. Simondon sobre o processo de individuação e de F. Varela e S. Weil sobre a atenção. O texto resulta de uma pesquisa realizada numa oficina de cerâmica do Instituto Benjamin Constant, no Rio de Janeiro. A cerâmica é analisada em suas características de maleabilidade, temporalidade lenta e imprevisibilidade. A partir do conceito de cognição inventiva, são analisados os efeitos da expressão artística na produção da subjetividade e na reinvenção do território existencial dos deficientes visuais.

  20. Notas sobre la situación de la producción primaria de arroz en Venezuela

    OpenAIRE

    Molina, Luisa Elena

    2003-01-01

    1.- Artículos Cartay, Rafael. "Los productos típicos y su reglamentación. Una tentativa de aplicación de la denominación de origen al cacao venezolano" Kalvatchev, Zlatko; Garzaro, Domingo; Guerra Cedezo, Franklin. "Theobroma Cacao L.: Un nuevo enfoque para nutrición y salud" Anido, Daniel; Gutiérrez, Alejandro. "La demanda de las calorías en Venezuela 1970-1995: Algunas evidencias empíricas" Molina, Luisa Elena. "Notas sobre la situación de la producción primaria de arroz en Ven...

  1. Nota [N] Roja la vibrante historia de un género y una nueva manera de informar

    Directory of Open Access Journals (Sweden)

    Blasco Fernando Checa Montúfar

    2010-06-01

    Full Text Available Presenta algunas reflexiones sobre el libro Nota[N]Roja, señala que se constituye en una guía mínima para periodistas de seguridad pública y justicia. En el se conceptualizan temas como absolución, acusación penal, daño moral querella, menores infractores, se aclaran y desarrollan temas de periodismo como autorregulación, cláusula de conciencia, derecho a la réplica, noticiabilidad, verificación de la información, etc.

  2. PIIID-formed (Ti, O)/Ti, (Ti, N)/Ti and (Ti, O, N)/Ti coatings on NiTi shape memory alloy for medical applications

    Energy Technology Data Exchange (ETDEWEB)

    Sun Tao, E-mail: taosun@hotmail.com.hk [Department of Mechanical Engineering, University of Hong Kong, Pokfulam Road (Hong Kong); Institute of Microelectronics, Agency for Science, Technology and Research (A-STAR) (Singapore); Wang Langping, E-mail: aplpwang@hit.edu.cn [State Key Lab of Advanced Welding and Joining, Harbin Institute of Technology (China); Wang Min; Tong Howang [Department of Mechanical Engineering, University of Hong Kong, Pokfulam Road (Hong Kong); Lu, William W. [Department of Orthopedics and Traumatology, University of Hong Kong, Sassoon Road (Hong Kong)

    2012-08-01

    (Ti, O)/Ti, (Ti, N)/Ti and (Ti, O, N)/Ti composite coatings were fabricated on NiTi shape memory alloy via plasma immersion ion implantation and deposition (PIIID). Surface morphology of samples was investigated using atomic force microscopy (AFM) and scanning electron microscopy (SEM). Cross-sectional morphology indicated that the PIIID-formed coatings were dense and uniform. X-ray diffraction (XRD) was used to characterize the phase composition of samples. X-ray photoelectron spectroscopy (XPS) results showed that the surface of coated NiTi SMA samples was Ni-free. Nanoindentation measurements and pin-on-disc tests were carried out to evaluate mechanical properties and wear resistance of coated NiTi SMA, respectively. For the in vitro biological assessment of the composite coatings in terms of cell morphology and cell viability, osteoblast-like SaOS-2 cells and breast cancer MCF-7 cells were cultured on NiTi SMA samples, respectively. SaOS-2 cells attached and spread better on coated NiTi SMA. Viability of MCF-7 cells showed that the PIIID-formed composite coatings were noncytotoxic and coated samples were more biocompatible than uncoated samples. - Highlights: Black-Right-Pointing-Pointer PIIID-formed coatings were fabricated on NiTi SMA to improve its biocompatibility. Black-Right-Pointing-Pointer Microstructure, mechanical properties and biocompatibility of coatings were investigated. Black-Right-Pointing-Pointer All PIIID-formed composite coatings were noncytotoxic and cytocompatible.

  3. Esfenoidotomia anterior para acesso aos tumores selares: nota técnica

    Directory of Open Access Journals (Sweden)

    Landeiro José Alberto

    2001-01-01

    Full Text Available A dissecção da mucosa do septo nasal durante o acesso transesfenoidal tradicional tem significante morbidade. A técnica de acesso direto ao seio esfenoidal, sem descolamento da mucosa septal é descrita. Elimina complicações como perfuração de septo, perda do olfato, epistaxe, fístula oronasal e dormência nos lábios. A esfenoidotomia pode ser feita sob visão do microscópio cirúrgico, do endoscópio ou mesmo sob luz frontal, e proporciona um ótimo espaço para remoção dos tumores de origem selar.

  4. Sobre los libros de oro del siglo XVI : notas críticas

    Directory of Open Access Journals (Sweden)

    Teodoro Martín Martín

    1990-01-01

    Full Text Available De sobra es conocido que los Libros de Oro, que aparecen en el siglo XVI en el marco de la renovación pedagógica que introdujo el Humanismo y el Renacimiento, son colecciones de pensamientos, sentencias, máximas y proverbios morales entresacados de las obras de los mejores filósofos estoicos de la Antigüedad Clásica. Sin embargo, poco más es lo que se conoce de ellos fuera del marco de la Historia de la Literatura. Incidentalmente, al ocuparse de la preceptiva de príncipes, algo se ha dicho sobre los textos áureos de la vida, si bien de forma tangencial. Consciente de esta laguna historiográfica voy a redactar las siguientes notas críticas, que no tienen otro objeto más que colaborar en el debate que historiadores, filósofos, pedagogos y literatos han de sostener sobre el tema. Nuestro país aportó al pensamiento educativo del siglo xvi dos figuras señeras: Luis Vives y Pedro Simón Abril. Pero su obra quedó en el plano teórico por cuanto carecieron de capacidad u oportunidad política para implantar sus doctrinas en la sociedad española. Alguna posibilidad tuvo el segundo de los autores citados, pero las mismas se quedaron en forma de memoriales o apuntamientos dirigidos al Rey Felipe II.

  5. Mujeres delincuentes e imaginarios. Criminología, cine y nota roja en México, 1940-1950

    Directory of Open Access Journals (Sweden)

    MARTHA SANTILLÁN ESQUEDA

    Full Text Available RESUMEN La modernización política y económica impulsada por los gobiernos tras la Revolución Mexicana, repercutió en la apertura de espacios para el desenvolvimiento de mujeres fuera del ámbito doméstico. La especialización de la criminología y la profesionalización de medios de comunicación, ligados a un fuerte conservadurismo, coadyuvaron en la conformación de un notorio temor ante tal fenómeno, asumiendo que ello pudiera provocar en las mujeres el relajamiento de la moral y, en consecuencia, conductas delictivas. El artículo analiza la conformación de imaginarios en torno a la mujer delincuente en un periodo de notorio auge tanto del cine como de la nota roja. Al presentar a las criminales como un ser monstruoso y perverso, imagen que no distaba mucho de las ideas criminológicas, se prolongaban temores existentes en torno a la delincuencia femenina pero también se fortalecía la concepción de una feminidad atada al espacio doméstico. Se estudian filmes, prensa nota roja, diarios de circulación nacional y artículos criminológicos.

  6. Heredabilidad y repetibilidad de la nota de tienta y de lidia en una ganadería de reses bravas en Colombia

    Directory of Open Access Journals (Sweden)

    Durán C. Carlos Vicente

    1995-12-01

    Full Text Available

    A study in the bullfight herd of Ernesto González Caicedo located in the Department of Cauca, Colombia, mostly of Santa Coloma lineage (a strain of bull-fighting cattle, either pure bred or up graded, evaluated between 1963 and 1994. The information arose from 948 standing records of "Nota de Tienta" (a quantitative test given to females to evaluate their potential for the bullfight. The test is used to select breeding darns and also used in males to select the future sires and "Nota de Lidia" (a quantitative test given to bulls to evaluate their overall performance in the bullfight. The Nota de Tienta and Nota de Lidia may not allow to make comparisons due the differences between both practices, but a "t" test to determinate evaluation type and sex effects over the calculate parameters showed them to be comparable (P <0.05. The repeatability was estimated as 0.18, a value inferior to the estimated heritability index h2 = 0.24. The difference may be explained by a bias in the estimated values of temporal and permanent environmental variances resulting from special environmental effects which influence on the behavior of the animal when it is tested.

    Se realizó un estudio en la ganadería de lidia de Ernesto González Caicedo, fundamentalmente de origen Santa Coloma, pura o por cruza absorbente de ganado mexicano, ubicada en el departamento del Cauca, Colombia. La información utilizada constó de 948 Notas de Tienta y de Lidia entre 1963 y 1994. Las notas de Tienta y de Lidia, que por el desarrollo un tanto diferente de las dos prácticas, pueden no permitir comparaciones, resultaron equiparables luego de realizar una prueba de "t" para medir efectos del tipo de evaluación y el sexo sobre la nota obtenida (P<0.05. La repetibilidad estimada para estas variables resultó en rxx= 0.18, un valor inferior al índice de heredabilidad obtenido durante la misma investigación, calculado en h2 = 0.24, a través de diferentes

  7. Growth and uptake of nutrients curves in star fruit plants budded with nota 10 cultivar Marcha de absorção de nutrientes e crescimento de mudas de caramboleira enxertada com a cultivar nota-10

    Directory of Open Access Journals (Sweden)

    Marina Burani Arouca

    2011-10-01

    Full Text Available The nutritional state of star fruit seedlings must be adequate for a successful field implementation. The objective of the present work was to study the growth and uptake of macro e micronutrients curves by star fruit plants budded with Nota 10 cultivar in nutrient solution conditions. The experimental design was randomized complete blocks, with four replications and six treatments, which were consisted by the times of collects during the 150 days of the experiment (each 25 days. In each collection, the plant growth was evaluated by the division of the plants in root, stem and leaves in order to obtain the height, diameter of the stem, leave area and the dry matter. The accumulation of dry matter followed sigmoidal adjustment, while the uptake of nutrients followed quadratic adjustment, except Mg, P, and Cu that followed sigmoidal adjustment. The accumulation of nutrients by star fruit seedlings ‘nota 10’ followed the sequence: NO adequado estado nutricional das mudas de caramboleira permite o sucesso da implantação de um pomar. O objetivo deste trabalho foi determinar a marcha de absorção de nutrientes e o crescimento de mudas enxertadas de caramboleira ‘Nota 10’ produzida em solução nutritiva. O delineamento experimental utilizado foi o inteiramente casualizado, com seis tratamentos e quatro repetições. Os tratamentos foram constituídos pelos tempos de coleta (25; 50; 75; 100; 125 e 150 dias após o início da brotação das borbulhas. As plantas foram avaliadas quanto a: altura, diâmetro do enxerto e do porta-enxerto, área foliar e massa da matéria seca (folhas, caule e raízes. Nos diferentes órgãos das mudas, determinou-se o acúmulo de macronutrientes. O acúmulo de massa seca das mudas de caramboleira apresentou ajuste sigmoidal, enquanto o acúmulo de nutrientes apresentou incremento quadrático, exceto Mg, P e Cu, que foi sigmoidal, obedecendo à seguinte sequência: N>K>Ca>P>S>Mg>Fe>Mn>Zn>B>Cu, sendo maior nas

  8. Estabilidade de produção de híbridos simples e duplos de milho oriundos de um mesmo conjunto gênico Yield stability in single and double crosses of maize originated from the same gene pool

    Directory of Open Access Journals (Sweden)

    Juarez Campolina Machado

    2008-01-01

    Full Text Available O presente trabalho foi realizado com o objetivo de comparar a estabilidade de híbridos simples e híbridos duplos de milho oriundos de um mesmo conjunto gênico. Foram avaliados 55 tratamentos, sendo dez híbridos simples comerciais, utilizados como parentais e 45 híbridos duplos resultantes de um dialelo completo. As sementes dos híbridos duplos foram obtidas na área experimental do Departamento de Biologia da Universidade Federal de Lavras (DBI/UFLA. Os experimentos foram desenvolvidos em 15 ambientes, no ano agrícola de 2005/2006, em propriedades de agricultores e estações experimentais. O delineamento experimental utilizado foi o de blocos casualizados com três repetições e o caráter avaliado foi a produtividade de espigas despalhadas (kg ha-1, corrigida para 13% de umidade. Obteve-se a contribuição de cada híbrido para a interação genótipos x ambientes e o desvio em relação ao desempenho máximo em cada ambiente utilizando a estatística não-paramétrica por meio da soma de postos. Os híbridos duplos foram, em média, mais estáveis, contudo, identificaram-se híbridos simples tão estáveis quanto os duplos.The objective of the present work was to study the adaptability and stability of single and double-crosses of maize originated from the same gene pool. Ten commercial single-crosses and all possible double-crosses, obtained from a complete diallel, were evaluated. Seeds of the double-crosses were obtained in an experimental area of the Biology Department at Universidade Federal de Lavras (DBI/UFLA. The experiments were conducted in 15 environments in the 2005/06 growing season, on farms and in experimental stations. The cultural practices were the ones normally used by farmers or experimental stations for maize. The entries were evaluated in randomized complete blocks design with three replications per environment. The trait under study was husked ears yield (kg ha-1, corrected to 13% of moisture content

  9. Percepções sobre a paternidade: descrevendo a si mesmo e o próprio pai como pai Perceptions about fatherhood: describing himself and his own father as father

    Directory of Open Access Journals (Sweden)

    Marília Reginato Gabriel

    2011-12-01

    Full Text Available Tornar-se pai pode ser experienciado tanto como um momento repleto de novos significados, transformações e responsabilidades, como um movimento de reavaliação dos valores e da criação tida pelos seus próprios pais. O objetivo desta pesquisa foi investigar as experiências e sentimentos de pais em relação à própria paternidade e em relação aos próprios pais. Participaram deste estudo oito homens, pais primíparos, com idades entre 28 e 41 anos, que responderam a uma entrevista semiestruturada. A análise de conteúdo dos relatos revelou que os pais descrevem-se como participantes nas tarefas de cuidado, e também como pessoas atenciosas e preocupadas com a educação e a saúde de seu filho. Diferenças e semelhanças em relação ao próprio pai no modo de exercer a paternidade mostram que, ao mesmo tempo em que desejam reproduzir os acertos dos pais, também buscam não repetir os erros.Becoming a father can be experienced both as a time replete with new meanings, transformations and responsibilities, as well as a period of re-evaluation of values and of own father childrearing behavior. The aim of this study was to investigate the experiences and feelings of fathers regarding their fatherhood and their own fathers. Participants were eight men, primiparous fathers, aged between 28 and 41 years who responded a semi-structured interview. Content analysis of the reports revealed that fathers describe themselves as participants in the tasks of caring, and also attentive and concerned with the child's education and health. Differences and similarities in relation to their own fathers childrearing practices show that, at the same time they want to reproduce their own fathers's succesfull behaviors, they also try to avoid what was considered mistakes.

  10. Epoxidation of limonene over Ti MCM 41 and Ti BETA

    International Nuclear Information System (INIS)

    Cubillos Lobo, Jairo Antonio; Gonzalez Rodriguez, Lina Maria; Montes de Correa, Consuelo

    2002-01-01

    Ti MCM 41 were synthesized and evaluated in the epoxidation of limonene, using peroxide of hydrogen (H 2 O) as agent oxidizer. The characteristic hexagonal phase of Ti MCM 41 was obtained by heating the precursor gel during three days at 100 centigrade degrees. Further heating up to ten days leads to a decrease of this phase. The increase (Ti) in the synthesis gel also decreases that phase. The increase of Ti in the synthesis gel also decreases that phase UV VIS and FTIR spectroscopy indicates that Ti was incorporated in the lattice of Ti MCM 41 as well as, in Ti BETA. SEM micrographs of Ti MCM 41 show that the morphology changes with the Ti loading. Ti MCM 41 was most active than Ti BETA for limonene epoxidation even though both show high selectivity to epoxides

  11. Comparative Evaluation of Using NOTA and DOTA Derivatives as Bifunctional Chelating Agents in the Preparation of 68Ga-Labeled Porphyrin: Impact on Pharmacokinetics and Tumor Uptake in a Mouse Model.

    Science.gov (United States)

    Guleria, Mohini; Das, Tapas; Amirdhanayagam, Jeyachitra; Sarma, Haladhar D; Dash, Ashutosh

    2018-02-01

    Both NOTA (1,4,7-triazacyclononane-1,4,7-triacetic acid) and DOTA (1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid) derivatives have been used as bifunctional chelating agents (BFCAs) for the preparation of 68 Ga-labeled target-specific agents having potential for positron emission tomography (PET) imaging of cancerous lesions. In the present work, the authors have attempted a comparative pharmacokinetic evaluation between 68 Ga-labeled porphyrins prepared using NOTA and DOTA derivatives as the BFCAs. A symmetrical porphyrin derivative, 5,10,15,20-tetrakis(p-carboxymethyleneoxyphenyl)porphyrin, was synthesized and coupled with two different BFCAs viz. p-NH 2 -benzyl-NOTA and p-NH 2 -benzyl-DOTA. Both the porphyrin-BFCA conjugates were radiolabeled with 68 Ga. A comparative bioevaluation involving pharmacokinetics and tumor affinity was performed in a tumor-bearing small animal model. Gallium-68-labeled porphyrin-amido-benzyl-NOTA and porphyrin-amido-benzyl-DOTA complexes were prepared with high radiochemical purity. Both radiolabeled complexes exhibited almost similar stability in human serum and near-identical tumor affinity and pharmacokinetic behavior in animal studies. The present study demonstrates that the pharmacokinetic behavior of 68 Ga-labeled porphyrin derivatives, prepared using either NOTA or DOTA derivatives as BFCAs, remains almost identical and hence both NOTA and DOTA derivatives could be considered equivalent for developing 68 Ga-based PET agents for imaging of tumorous lesions.

  12. Características en contenido y afiliación de Notas Clínicas publicadas en la revista CIMEL, 2001- 2009

    Directory of Open Access Journals (Sweden)

    Juan José Montenegro-Idrogo

    2010-01-01

    Full Text Available Objetivo, Determinar frecuencia y características de contenido y afiliación de Notas clínicas (casos clínicos publicados en la Revista CIMEL período 2001-2009. Diseño, Descriptivo, bibliométrico Lugar, Se utilizó el sistema de base de datos de la biblioteca central de la UNMSM. Participantes, artículos publicados en la revista CIMEL como Notas clínicas (Casos clínicos en el período citado. Intervenciones, Se determinó la frecuencia según años, además de las características de afiliación según país, región, y de contenido (tema de especialidad y condición de importancia en publicación. Principales medidas de resultados, Distribución de frecuencias y gráfico lineal para representar producción de esta categoría en la revista según años. Resultados, Total de notas clínicas (n=34, hubo mayor número de publicaciones a partir del año 2005. Mayor porcentaje de notas clínicas según país de afiliación fue: Venezuela (35,3%, Colombia (17,6%, Chile (17,6%, Bolivia (11,8%, y según tema de especialidad, Cirugía (21%, Oncología (14,7% y Hematología (11,8%. Las condiciones más frecuentes que justifican publicación de notas clínicas son: enfermedad rara o infrecuente (79,4% y presentación o complicación inusual de enfermedad (26,5%. La distribución de autores más frecuente fue, un médico y más de un estudiante de medicina (47,5%. Conclusiones, La frecuencia de publicación de notas clínicas en la revista CIMEL ha aumentado desde la periodicidad semestral, siendo la principal justificación de publicación, presentación de enfermedad rara o infrecuente. Es preocupante no refleje la participación de la mayoría de instituciones estudiantiles afiliadas a la Federación del cual es órgano oficial de difusión.

  13. PET imaging of angiogenesis after myocardial infarction/reperfusion using a one-step labeled integrin-targeted tracer {sup 18}F-AlF-NOTA-PRGD2

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Haokao [The Fourth Military Medical University, Department of Cardiology, Xijing Hospital, Xi' an (China); National Institute of Biomedical Imaging and Bioengineering (NIBIB), National Institutes of Health (NIH), Laboratory of Molecular Imaging and Nanomedicine (LOMIN), Bethesda, MD (United States); Lang, Lixin; Guo, Ning; Quan, Qimeng; Hu, Shuo; Kiesewetter, Dale O.; Niu, Gang; Chen, Xiaoyuan [National Institute of Biomedical Imaging and Bioengineering (NIBIB), National Institutes of Health (NIH), Laboratory of Molecular Imaging and Nanomedicine (LOMIN), Bethesda, MD (United States); Cao, Feng [The Fourth Military Medical University, Department of Cardiology, Xijing Hospital, Xi' an (China)

    2012-04-15

    The {alpha}{sub v}{beta}{sub 3} integrin represents a potential target for noninvasive imaging of angiogenesis. The purpose of this study was to evaluate a novel one-step labeled integrin {alpha}{sub v}{beta}{sub 3}-targeting positron emission tomography (PET) probe, {sup 18}F-AlF-NOTA-PRGD2, for angiogenesis imaging in a myocardial infarction/reperfusion (MI/R) animal model. Male Sprague-Dawley rats underwent 45-min transient left coronary artery occlusion followed by reperfusion. The myocardial infarction was confirmed by ECG, {sup 18}F-fluorodeoxyglucose (FDG) imaging, and cardiac ultrasound. In vivo PET imaging was used to determine myocardial uptake of {sup 18}F-AlF-NOTA-PRGD2 at different time points following reperfusion. The control peptide RAD was labeled with a similar procedure and used to confirm the specificity. Ex vivo autoradiographic analysis and CD31/CD61 double immunofluorescence staining were performed to validate the PET results. Myocardial origin of the {sup 18}F-AlF-NOTA-PRGD2 accumulation was confirmed by {sup 18}F-FDG and autoradiography. PET imaging demonstrated increased focal accumulation of {sup 18}F-AlF-NOTA-PRGD2 in the infarcted area which started at day 3 (0.28 {+-} 0.03%ID/g, p < 0.05) and peaked between 1 and 3 weeks (0.59 {+-} 0.16 and 0.55 {+-} 0.13%ID/g, respectively). The focal accumulation decreased but still kept at a higher level than the sham group after 4 months of reperfusion (0.31 {+-} 0.01%ID/g, p < 0.05). Pretreatment with unlabeled arginine-glycine-aspartic acid (RGD) peptide significantly decreased tracer uptake, indicating integrin specificity of this tracer. At 1 week after MI/R, uptake of the control tracer {sup 18}F-AlF-NOTA-RAD that does not bind to integrin, in the infarcted area, was only 0.21 {+-} 0.01%ID/g. Autoradiographic imaging showed the same trend of uptake in the myocardial infarction area. The time course of focal tracer uptake was consistent with the pattern of vascular density and integrin {beta

  14. Sobre los vínculos entre España y Argentina en La Nota [1915-1917

    Directory of Open Access Journals (Sweden)

    Verónica Delgado

    2010-11-01

    Full Text Available This article takes as its object weekly Argentinian La Nota to read between 1915 and 1917, in the light of the Great War, some emergencies of the reconfiguration related to specific topics of the dominant literary and intellectual debates, which took place the years immediately preceding and still in force, as it was the problems of national and associated to it, the place assigned to cultural relations between Spain and Argentina in that field. Thus, through the interventions of various authors, the magazine shows how to think the function of culture -and therefore of the intellectuals-, and at the same time, it offers a more or less critical sight into those relationships. Thus, for example, happens to "El centenario de Cervantes" [Rodó] or the "Meditaciones sobre el nacionalismo" [Rojas], "America and España" [Blanco Fombona], or "Manifiesto germanista de los intelectuales españoles" [Unamuno], "El cuento de la raza" [Del Campo

  15. É Possível Integrar, em um mesmo Conceito, os Vínculos Afetivo e Instrumental? O olhar de gestores sobre o comprometimento com a organização

    Directory of Open Access Journals (Sweden)

    Janice Janissek de Souza

    2012-06-01

    Full Text Available O objetivo do presente estudo é compreender qual a visão que os gestores possuem do que é um trabalhador comprometido com a organização, explorando a pertinência de se tratar como integrantes do mesmo construto as dimensões afetiva e instrumental, conforme proposto por Meyer e Allen (1991. Para tanto, definiu-se caracterizar os elementos esquemáticos que compõem o conceito de trabalhador comprometido e explorar o peso dos elementos afetivos e instrumentais que integram este esquema. Os elementos esquemáticos foram identificados por meio da atribuição de rótulo verbal a dois per s distintos de trabalhador comprometido; a resposta espontânea a questionamento acerca do que é comprometimento e suas principais características e escolha de características de comprometimento disponíveis na literatura sobre o tema. Duas empresas de médio/grande porte da região metropolitana de Salvador-BA participaram do estudo por meio de oito gestores (quatro de cada organização. Os dados foram tratados por meio da análise de conteúdo e os resultados apresentados com o uso de técnicas de mapeamento cognitivo. Concluiu-se que os gestores pesquisados relacionam o conceito de comprometimento à sua base afetiva e consideram o comprometimento instrumental como sendo a antítese do comprometimento. Consideram que esforço-extra e contribuição adicional são importantes para que um trabalhador possa ser considerado como comprometido. ----- Is it Possible to Integrate Affective and Instrumental Ties into the same Concept? Managers’ perspective on commitment to the organization ----- ABSTRACT ----- The aim of this study is to understand the vision that managers have about worker commitment with the organization exploring the relevance of treating affective and instrumental dimensions in the same construct, as proposed Meyer and Allen (1991. A description was made of the elements that make up the schematic concept of employee commitment and the

  16. Una Nota sobre la Construcción de Series de Precios de Activos Reales: Tierra y Casas en Chile Una Nota sobre la Construcción de Series de Precios de Activos Reales: Tierra y Casas en Chile

    OpenAIRE

    Raimundo Soto; Felipe Morandé

    1992-01-01

    Una Nota sobre la Construcción de Series de Precios de Activos Reales: Tierra y Casas en Chile This note presents previously unpublished data on prices of agricultural land in Chile's central region and houses (both rental and purchasing prices) in Santiago, with the corresponding methodology. As such, it is a follow-up to an Appendix in Morande (1992).

  17. Las abejas de Porce familia colletidae (hymenoptera: apoidea notas y claves para los géneros presentes en la zona de influencia del embalse Porce ii.

    Directory of Open Access Journals (Sweden)

    Smith Pardo Allan H.

    1999-12-01

    Full Text Available Se presentan claves taxonómicas a nivel de género para la identificación de las abejas colletidas de la zona de Influencia del Embalse Porce II (Porce, Antioquía, Colombia S.A. Adicionalmente se presentan algunas notas para los géneros de colletidos capturados durante el inventario de las abejas silvestres de la zona.

  18. Oculomotricidade na infância: o padrão de normalidade é o mesmo do adulto? Oculomotricity in childhood: is the normal range the same as in adults?

    Directory of Open Access Journals (Sweden)

    Raquel Mezzalira

    2005-10-01

    Full Text Available O estudo da oculomotricidade se dá através da avaliação de três sistemas: movimentos oculares sacádicos (MOS, nistagmo optocinético (NO e movimentos oculares de rastreio lento (MORL. A atuação conjunta destes três sistemas permite a estabilização do campo visual nas diversas situações de movimento às quais o indivíduo é submetido. OBJETIVO: Comparar os valores da oculomotricidade encontrados em crianças e em adultos normais na tentativa de confirmar, ou não, a viabilidade do uso dos mesmos parâmetros de normalidade dos adultos na interpretação do exame de crianças. FORMA DE ESTUDO: clínico com coorte transversal. MATERIAL E MÉTODO: Foram estudados os MOS, o NO e os MORL em 50 crianças e em 35 adultos normais e os resultados foram comparados entre si através do teste t de Student. RESULTADOS: Os dados mostram diferença significativa entre os resultados obtidos nos testes de crianças e de adultos (significativo ao nível alfa = 0,05. DISCUSSÃO: Na literatura encontramos evidências de que a mielinização das vias vestibulares ocorre em torno das 16 semanas e que os tratos piramidais se mielinizam aos 24 meses de idade sendo a oculomotricidade perfeita nessa época. Outros estudos descrevem a importância destes testes na detecção de doenças neurológicas, de alterações visuais e até como preditores do risco de desenvolvimento de esquizofrenia no entanto não trazem os valores de normalidade para a criança. No nosso trabalho encontramos aumento da latência dos MOS, aumento no ganho do NO, diminuição do ganho e aumento do grau de distorção dos MORL em crianças quando comparadas aos adultos o que está de acordo com a literatura. Estas alterações poderiam ser explicadas pela desatenção e pela imaturidade do controle dos movimentos oculares na criança. CONCLUSÃO: Assim, torna-se necessário o estabelecimento de um parâmetro de normalidade para a oculomotricidade na infância para que a oculografia

  19. Nanomechanical properties of TiCN and TiCN/Ti coatings on Ti prepared by Filtered Arc Deposition

    International Nuclear Information System (INIS)

    Sun, Yong; Lu, Cheng; Yu, Hailiang; Kiet Tieu, A.; Su, Lihong; Zhao, Yue; Zhu, Hongtao; Kong, Charlie

    2015-01-01

    Monolayer TiCN and multilayer TiCN/Ti coatings were deposited on the surface of Ti using the Filtered Arc Deposition System (FADS). Nanoindentation tests were performed on both coatings. The multilayer TiCN/Ti coating exhibited better ductility than the monolayer TiCN coating. The lattice constants of the coatings were characterized by X-ray diffraction. Transmission Electron Microscopy (TEM) was used to investigate the fracture behavior of the coatings. Inter-columnar, inclined and lateral cracks were found to be the dominant crack modes in the monolayer TiCN coatings while small bending crack and radial crack were the dominant crack modes in the multilayer TiCN/Ti coatings. The Finite Element Method (FEM) was used to simulate the indentation process. It was found that the Ti interlayer in the multilayer TiCN/Ti coating could efficiently suppress the fracture, which is responsible for the improved ductility of the multilayer TiCN/Ti coating

  20. In situ NiTi/Nb(Ti) composite

    International Nuclear Information System (INIS)

    Jiang, Daqiang; Cui, Lishan; Jiang, Jiang; Zheng, Yanjun

    2013-01-01

    Graphical abstract: - Highlights: • In situ NiTi/Nb(Ti) composites were fabricated. • The transformation temperature was affected by the mixing Ti:Ni atomic ratios. • The NiTi component became micron-scale lamella after forging and rolling. • The composite exhibited high strength and high damping capacity. - Abstract: This paper reports on the creation of a series of in situ NiTi/Nb(Ti) composites with controllable transformation temperatures based on the pseudo-binary hypereutectic transformation of NiTi–Nb system. The composite constituent morphology was controlled by forging and rolling. It is found that the thickness of the NiTi lamella in the composite reached micron level after the hot-forging and cold-rolling. The NiTi/Nb(Ti) composite exhibited high damping capacity as well as high yield strength

  1. Amorphous Ti-Zr

    International Nuclear Information System (INIS)

    Rabinkin, A.; Liebermann, H.; Pounds, S.; Taylor, T.

    1991-01-01

    This paper is the first report on processing, properties and potential application of amorphous titanium/zirconium-base alloys produced in the form of a good quality continuous and ductile ribbon having up to 12.5 mm width. To date, the majority of titanium brazing is accomplished using cooper and aluminum-base brazing filler metals. The brazements produced with these filler metals have rather low (∼300 degrees C) service temperature, thus impeding progress in aircraft and other technologies and industries. The attempt to develop a generation of high temperature brazing filler metals was made in the late sixties-early seventies studies in detail were a large number of Ti-, Zr-Ti-Zr, Ti-V and Zr-V-Ti based alloys. The majority of these alloys has copper and nickel as melting temperature depressants. The presence of nickel and copper converts them into eutectic alloys having [Ti(Zr)] [Cu(Ni)], intermetallic phases as major structural constituents. This, in turn, results in high alloy brittleness and poor, if any, processability by means of conventional, i.e. melting-ingot casting-deformation technology. In spite of good wettability and high joint strength achieved in dozens of promising alloys, only Ti-15Cu-15Ni is now widely used as a brazing filler metal for high service temperature. Up until now this material could not be produced as a homogeneous foil and is instead applied as a clad strip consisting of three separate metallic layers

  2. Ensaios terapêuticos com penicilina: II - Sífilis: (Nota prévia

    Directory of Open Access Journals (Sweden)

    A. E. Arêa Leão

    1944-10-01

    Full Text Available Seis sifiliticos foram tratados com penicilina em doses baixas, no Hospital Evandro Chagas, do Instituto Oswaldo Cruz. Protossifilomas foram bacterioscópicamente negativos entre 3 e 6 dias e cicatrizaram completamente entre 10 e 13 idas, com a aplicação de 1.200 a 2.400 unidades Oxford por 24 horas. Condilomas sifiliticos e placas mucosas hipertróficos tiveram bacterioscopia negativa entre 6 e 8 dias, cicatrizaram completamente entre 10 e 20 dias, com a aplicação de 1.200 unidades por 24 horas. Porém, doses de 4.800 unidades, no mesmo espaço de tempo, forma insuficientes para controlar outras manifestações luéticas secundárias (roséolas, placas mucosas. Em 3 casos sob contrõle sorológico, verificou-se que a negatividade das reações não acompanha imediatamente a cura clínica. Além disso, conforme já foi observado também com a bouba, os resultados dos testes sorológicos oscilam mezes a fio, negativando e voltando à positividade.Six syphilitic patients were treated with Penicillin in low dosis at the Evandro Chagas Hospital, of the Oswaldo Cruz Insitute. Protosyphilomas were found to be bacterioscopically-negative in between three and six days, and cicatrized completely between 10 and 13 days, under applicatins of 1.200 mucous patches, showed negative bacterioscopical results within between 10 and 20 days, under the applications fo 1.200 Oxford units per 24 hours. Doses of 4.800 units, during the same period of time, however, found insufficient to control other secundary luetic manifestations (roseolar rash. In three cases under sorological control it was found that after a clinical cure had been effected, the Wassermann reaction showed considerable escillation, becoming first negative and then pesitive again.

  3. Effect of nano-CeO 2 on microstructure properties of TiC/TiN+TiCN ...

    Indian Academy of Sciences (India)

    TiC/TiN+TiCN-reinforced composite coatings were fabricated on Ti–6Al–4V alloy by laser cladding, which improved surface performance of the substrate. ... X-ray diffraction results indicated that Al3Ti+TiC/TiN+nano-CeO2 laser-cladded coating consisted of Ti3Al, TiC, TiN, Ti2Al20Ce, TiC0.3N0.7, Ce(CN)3 and CeO2, this ...

  4. Formation and growth mechanism of TiC crystal in TiCp/Ti composites

    Institute of Scientific and Technical Information of China (English)

    金云学; 王宏伟; 曾松岩; 张二林

    2002-01-01

    Ti-C and Ti-Al-C alloys were prepared using gravity and directional solidification processes. Morphologies of TiC crystal were investigated by using SEM, XRD and EDX. Also, the formation and growth mechanism of TiC crystal have been analyzed on the basis of coordination polyhedron growth unit theory. During solidification of titanium alloys, the coordination polyhedron growth unit is TiC6. TiC6 growth units stack in a linking mode of edge to edge and form octahedral TiC crystal with {111} planes as present faces. Although the growing geometry of TiC crystal is decided by its lattice structure, the final morphology of TiC crystal depends on the effects of its growth environment. In solute concentration distribution, the super-saturation of C or TiC6 at the corners of octahedral TiC crystal is much higher than that of edges and faces of octahedral TiC crystal. At these corners the driving force for crystal growth is greater and the interface is instable which contribute to quick stacking rate of growth units at these corners and result in secondary dendrite arms along TiC crystallographic 〈100〉 directions. TiC crystal finally grows to be dendrites.

  5. Stress analysis and microstructure of PVD monolayer TiN and multilayer TiN/(Ti,Al)N coatings

    NARCIS (Netherlands)

    Carvalho, NJM; Zoestbergen, E; Kooi, BJ; De Hosson, JTM

    2003-01-01

    Two PVD titanium nitride based coatings; monolayer TiN and multilayer resulting from the stacking of TiN and (Ti,Al)N layers were evaluated with respect to their stress state and microstructure. The TiN was deposited by triode evaporation ion plating, whereas the TiN/(Ti,AI)N was deposited using a

  6. Fabrication and characterization of laminated Ti-(TiB+La2O3/Ti composite

    Directory of Open Access Journals (Sweden)

    Yuanfei Han

    2015-10-01

    Full Text Available The incorporation of ceramic particulate reinforcements into titanium alloys can improve the specific strength and specific stiffness, while inevitably reduce the plasticity and ductility. In this study, in situ synthesized multilayer Ti-(TiB+La2O3/Ti composite was designed by learning from the microstructure of nature biological materials with excellent mechanical properties. The Ti-(TiB+La2O3/Ti composite with unique characteristic of laminated structure was prepared by combined powder metallurgy and hot rolling. The method has the synthesize advantages with in-situ reaction of Ti and LaB6 at high temperature and controllability of reinforcements size and constituent phases in composites. The result shows that the pores in the as sintered laminated structure composite completely disappeared after hot rolling at 1050 °C. The agglomerated reinforcement particles were well dispersed and distributed uniformly along the rolling direction. The thickness of pure Ti layer and (TiB+La2O3/Ti composite layer decreased from 1 mm to about 200 μm. Meanwhile, the grains size was refined obviously after rolling deformation. The room temperature tensile test indicates that the elongation of the laminated Ti-(TiB+La2O3/Ti composite improved from 13% to 17% in comparison with the uniform (TiB+La2O3/Ti composite, while the tensile strength had little change. It provides theoretical and experimental basis for fabricating the novel high performance laminated Ti-(TiB+La2O3/Ti composites.

  7. Structural evolution of Ti/TiC multilayers

    International Nuclear Information System (INIS)

    Dahan, I.; Frage, N.; Dariel, M.P.

    2004-01-01

    Hard coatings based on metal/ceramic multilayers with periods in the nanometer range have been shown to possess some potential for improved tribological and mechanical properties. The present work is concerned with the structural evolution of (Ti/TiC) multilayers. Two kinds of multilayers consisting of 30 equithick (40 nm)TiC layers and 20 and 60 nm thick Ti layers, respectively, were sputter deposited on Mo substrates. The structural and the compositional evolution of these multilayers were examined by x-ray diffraction, transition electron microscopy (TEM), high-resolution TEM, Auger electron microscopy spectroscopy and differential thermal analysis (DTA), in the as-deposited state and after various heat treatments up to 500 deg. C. Initially, the Ti layers had a crystalline columnar grain structure displaying a (002) texture. The TiC layers displayed weak crystallinity with a pronounced (111) texture. In the course of the heat treatments, carbon diffused from the carbide layer into the adjacent Ti layers transforming the latter into off-stoichiometric TiC x with x≅0.5 and simultaneously depleting the carbon content of the initial carbide layer. The formed TiC x layers maintained the textural relationship with the neighboring TiC layers, consistent with a transformation that involved only a ABAB to ABC stacking change of the Ti sublattice. Increased mobility of the Ti atoms in carbon-depleted original TiC layers led to their full or partial recrystallization. The thermal effects associated both with the transformation of Ti layers into TiC, due to the influx of carbon atoms, and with the recrystallization of the original TiC layers were clearly revealed by the DTA measurements

  8. Notas sobre el “nombre simbólico” en Hispanoamérica”

    Directory of Open Access Journals (Sweden)

    Yván Pozuelo Andrés

    2011-01-01

    Full Text Available En el momento de la iniciación, los masones eligen un nombre simbólico que les identificará en sus acciones dentro de la Orden. En el proceso de iniciación, los masones poseen la oportunidad de escoger un nombre simbólico diferente a su nombre de pila. Estos nombres simbólicos revelan sus percepciones del mundo y transmiten un aspecto vital del que quisieron informar a los demás miembros. ¿Por qué este uso fue exclusivo de las masonerías hispanoamericanas? ¿Cuándo y por qué se extendió la costumbre? El estudio de caso analizado fue la comunidad asturiana, ya que fue una de los más importantes grupos de inmigrantes españoles en América. Con estas notas y el estudio regional se pretende contestar a estos interrogantes: ¿Fue el nombre simbólico un uso originado por los masones? ¿Fue exclusivo de la masonería? ¿Qué informaciones destacan de los nombres simbólicos hispanoamericanos de los masones de Asturias? ¿Qué datos revelan los nombres simbólicos hispanoamericanos de los masones asturianos residentes en Hispanoamérica?

  9. A oikonomia nas epístolas de Paulo: notas sobre a “hermenêutica” de Agamben

    Directory of Open Access Journals (Sweden)

    Rafael Venturini

    2017-09-01

    Full Text Available Acompanhando a reconstrução da origem do conceito teológico de oikonomia, que Giorgio Agamben oferece na obra O Reino e a Glória: Uma Genealogia Teológica da Economia e do Governo: Homo sacer II, 2 (2011, o artigo propõe uma releitura dos trechos nos quais, em suas cartas às igrejas, o apóstolo Paulo utiliza o termo grego. Essa releitura confirma a proposição geral do filósofo italiano, de que a compreensão da oikonomia como uma “administração” dos homens e das coisas, como um paradigma gerencial, não parece ter sofrido alterações semânticas expressivas nos escritos de Paulo e na linguagem corrente entre os cristãos até o fastígio do Império Romano. Não obstante, tal releitura acaba por indicar fragilidades significativas em O Reino e a Glória, as quais podem ser constatadas tanto pelo leitor não especializado como pelos estudiosos de Agamben nos campos da filosofia, da teologia e da economia política. Essas notas sobre a obra de Agamben são, por fim, uma tentativa de estabelecer um diálogo com outros textos recentemente publicados no Brasil sobre o autor.

  10. Notas acerca del movimiento natural de la población para el estudio de la salud perinatal

    Directory of Open Access Journals (Sweden)

    Sol Pía Juárez

    2014-11-01

    Full Text Available El movimiento natural de la población, publicado por el Instituto Nacional de Estadística (INE, constituye una fuente de enorme importancia para el estudio de la salud perinatal en el ámbito nacional. Sin embargo, se desconocen las características de la recogida de la información que afectan a la calidad y la interpretación de los estudios epidemiológicos que utilizan esta fuente. El objetivo de este estudio es dar a conocer cómo se recoge la información y algunos problemas asociados. Este trabajo es el resultado de un análisis de las notas metodológicas del INE y de la información recogida de primera mano en hospitales de Madrid, en el Registro Civil central de Madrid y en el Instituto de Estadística de Madrid (IEM. Es necesaria una mayor integración entre las instituciones involucradas para mejorar la calidad de las estadísticas de nacimientos y muertes fetales tardías.

  11. Las notas al pie en la traducción de Fifty Shades (Footnotes in the Translation of Fifty Shades

    Directory of Open Access Journals (Sweden)

    Xinia Valverde Jara

    2017-11-01

    Full Text Available Se analiza el recurso de las notas a pie de página insertas en la traducción independiente de literatura comercial en versión digital, de la trilogía Fifty Shades of Grey, Fifty Shades Darker y Fifty Shades Freed, de E. L. James. Se examina el grado de influencia de esos elementos extratextuales, y se concluye que todos ellos, organizados en un complejo proceso de traducción, en especial los del contexto de llegada, condicionan la estrategia traductológica. Abstract This study examines the use of footnotes as a translation strategy in the independent translation of commercial literature in digital format, based on the trilogy written by E. L. James, Fifty Shades of Grey, Fifty Shades Darker and Fifty Shades Freed. The analysis measures the influence of these extratextual elements within the complex translation process, specifically those of the target language context, and it is concluded that they condition the translation strategies used.

  12. Uma Nota Sobre o Impacto do Comércio Internacional no Crescimento de Economias em Desenvolvimento

    Directory of Open Access Journals (Sweden)

    ALEXANDRE LOURES

    Full Text Available Esta nota investiga o impacto do comércio internacional sobre o crescimento econômico de um grupo de países em desenvolvimento. Para tanto, emprega-se o modelo estrutural proposto por Anderson et al. (2014. Os resultados indicam que o crescimento é estimulado pelo comércio bilateral. Os exercícios contrafactuais sugerem que a liberalização comercial, seja ela fruto de uma redução dos custos do North American Free Trade Agreement (NAFTA, ou de um processo de hiperglobalização, possui um impacto expressivo e positivo sobre o bem-estar social para alguns dos países analisados. No caso do Brasil, a melhora no bem-estar é de 0,25% e 9,13%, respectivamente. Em geral, os resultados demonstram que o comércio internacional pode ser utilizado como instrumento para alavancar o crescimento do PIB e o bem-estar dos países.

  13. Etnografía concéntrica y didáctica Notas para no-antropólogos

    Directory of Open Access Journals (Sweden)

    José Luis Ramos Ramírez

    2017-01-01

    Full Text Available Ante la necesidad de capacitar a estudiantes y profesionales que no son antropólogos en el quehacer etnográfico se han publicado múltiples manuales que presentan esta labor como exclusivamente metodológica, incluso como un digno ejemplo del enfoque cualitativo; sin embargo al revisar la figura que se oferta en esta literatura encuentro que es una imagen que no hace justicia a la complejidad que significa la Etnografía. Por ello, en este ensayo presento una serie de notas aclaratorias para que se visualicen sus distintos aspectos o caras que muestra la denominada Etnografía. También, incluyo el reto que significa llevar a cabo investigaciones etnográficas en espacios más urbanos y contemporáneos, siendo un ejemplo el caso de la Etnografía Organizacional. Para concluir, anoto algunas recomendaciones, destacando un esquema de trabajo que denomino “Etnografía Concéntrica”, dirigidas a los jóvenes investigadores interesados en incursionar en este campo del conocimiento para orientar sus pesquisas respectivas y que no son antropólogos.

  14. A proteção de dados pessoais nos programas de Nota Fiscal: um estudo de caso do “Nota Fiscal paulista” | Protection of personal data in programs for tax-evasion prevention by collecting invoices: the case of São Paulo

    Directory of Open Access Journals (Sweden)

    Jorge Machado

    2016-11-01

    ABSTRACT The aim of this paper is to build a picture of privacy protection in programs that collect invoices to prevent tax evasion. The survey is done by analyzing the active transparency –published in a proactive way by the State Department of Finance – on the program's  home-page. This survey includes information regarding data protection policy, how the information is used, who has access to data, data storage time, information shared with third parties, cooperation with other authorities and the possibility of the consumer deleting his/her data. As a case study, we will analyze the Program Nota Fiscal Paulista, compulsory for outlets located in São Paulo State. Keywords: Data Protection; Privacy; Tax Evasion: Nota Fiscal Paulista.

  15. "Notae in cartulis" en la documentación madrileña del siglo XIII : contribución al estudio de la elaboración del documento privado en Castilla

    Directory of Open Access Journals (Sweden)

    María Teresa Carrasco Lazareno

    1997-01-01

    Full Text Available Edición y análisis diplomático de tres «notae in cartulis» o notas preparatorias del documento definitivo, redactadas en hojas sueltas de pergamino, pertenecientes a la colección del convento de Santo Domingo el Real de Madrid. Datadas en la segunda mitad del siglo xiii y escritas por «scriptores» profesionales, antecedentes inmediatos del «publicus notarius», resumen los aspectos esenciales de dos apeos y de una permuta. Estas «notae» tienen interés como antecedentes de las minutas y de los protocolos notariales y por ser escasos los testimonios originales conservados. Además, nos permiten constatar que la validez jurídica de la nota en la etapa prenotarial —aún no «scriptura matrix»— podía ser similar a la de la «scriptura originalis», pues en estos casos no debieron redactarse las correspondientes cartas, siendo la nota el único título acreditativo de la consecución del negocio jurídico.Edition and diplomatic analysis of tíiree «notae in cartulis» or preparatory notes of the final document, written on loóse sheet of parchment, from the documentary resources of the monastery of Saint Dominio the Royal in Madrid. Dated in the second part of the thirteenth century and written by professional «scriptores», inmediate precedent of the «publicus notarius», they sum up the most esential aspects of two fixing of boundaries and one barter. These «notae» are important considered as an antecedent of notes and notarial registers, being quite rare the original testimonies kept. Besides, the allow us to confirm that the «notae» juridical validity in the prenotarial phase —not yet «scriptura matrix»— could be similar to the «scriptura originalis», because in these cases the respective documents were not written, being the note the only evidential title of the juridical «negotium» obtaining.

  16. Calidad de las notas de enfermería en los registros clínicos del servicio de hospitalización y emergencia del Hospital de Emergencias Pediátricas Lima 2016

    OpenAIRE

    Cucho Martínez, Liliana Luz

    2016-01-01

    El presente estudio titulado “calidad de las notas de enfermería en los registros clínicos del servicio de hospitalización y emergencia del hospital emergencias pediátrica, Lima 2016” tuvo como objetivo general, comparar la calidad de las notas de enfermería en los registros clínicos entre los servicio de hospitalización y emergencia del hospital emergencias pediátricas. El tipo de investigación fue cuantitativo, retrospectivo, de diseño no experimental, de corte transversal...

  17. Genes, visibilidad mediática y discursos emergentes. Análisis semántico-pragmático de notas cortas

    Directory of Open Access Journals (Sweden)

    Alicia Pineda

    2015-04-01

    Full Text Available Se analizó una nota corta sobre “descubrimiento de genes” para develar recursos y estrategias utilizadas por el emisor del mensaje para llegar al público meta. Se aplicó el enfoque integrado semántico-pragmático del discurso combinado con el análisis semiodiscursivo. Los resultados muestran en cada fase del enfoque seleccionado los mecanismos que contribuyen con la reducción de la complejidad de la información cuando se utiliza el lenguaje con fines comunicativos. Las conclusiones son las siguientes: 1. La nota corta es un género discursivo híbrido que se mueve entre los discursos referido y comentado. 2. El análisis devela la complementariedad entre tradicionales estrategias lingüístico-discursivas y las emergentes que rescatan la visibilización de los procesos colectivos y de equipo en la realización de las actividades de investigación y desarrollo y que describen, explican y argumentan sobre procesos de investigación y no solo sobre sus productos. 3. El plan discursivo de la nota corta muestra, fundamentalmente, que la combinación de recursos y estrategias obedeció a la finalidad de lograr: (a el mantenimiento del referente. (b “hacer creer” o persuadir sobre los resultados obtenidos mediante la creación de “efecto de verdad”, que se cumple mediante la estrategia de argumentación, en un intento por lograr credibilidad en el receptor. c la integración semántica-pragmática del discurso y el diseño de planes discursivos puede favorecer la comunicación pública de la ciencia y la tecnología en las organizaciones que gestionan la ciencia, tecnología e innovación

  18. Evaluation of an [18F]AlF-NOTA Analog of Exendin-4 for Imaging of GLP-1 Receptor in Insulinoma

    Directory of Open Access Journals (Sweden)

    Dale O. Kiesewetter, Ning Guo, Jinxia Guo, Haokao Gao, Lei Zhu, Ying Ma, Gang Niu, Xiaoyuan Chen

    2012-01-01

    Full Text Available Introduction: The GLP-1 receptor plays an important role in glucose homeostasis and thus is a very important target for diabetes therapy. The receptor is also overexpressed in insulinoma, a tumor of pancreatic beta-cells. We previously evaluated two fluorine-18-labeled analogs of exendin-4 prepared by conjugation with [18F]FBEM (N-[2-(4-[18F]fluorobenzamideethyl]maleimide. Both compounds demonstrated good tumor uptake, but the synthesis of the radiotracers was time consuming. To overcome this challenge, we developed a NOTA analog and performed radiolabeling using aluminum [18F]fluoride complexation.Methods: Cys40-exendin-4 was conjugated with NOTA mono N-ethylmaleimide. [18F]AlF conjugation was conducted and the radiolabeled product purified by preparative HPLC. Dynamic and static PET imaging scans were conducted on nude mice with established INS-1 xenografts. Uptake of tumor and other major organs in static images was quantitated (%ID/g and comparison with blocking studies was made. PET quantification was also compared with ex vivo biodistribution results.Results: The radiosynthesis provided [18F]AlF-NOTA-MAL-cys40-exendin-4 in 23.6 ± 2.4 % radiochemical yield (uncorrected, n = 3 after HPLC; the process required about 55 min. The specific activity at time of injection ranged from 19.6 to 31.4 GBq (0.53-0.85 Ci/µmol. Tumor uptake had reached its maximum (16.09 ± 1.18% ID/g, n = 4 by 5 min and remained nearly constant for the duration of the study. Kidney uptake continued to increase throughout the entire one hour time course. Pre-injection of exendin-4 caused a marked reduction in tissue uptake with the major exception of liver and kidneys, in which uptake was not affected. HPLC analysis of the radioactive components in extracts of the tumor and plasma showed primarily parent compound at 60 min post-injection, whereas extracts of kidney and urine contained exclusively one polar radioactive component.Conclusion: The radiotracer is prepared in

  19. Questões de linguagem: notas sobre jornalismo, história e lingüística

    Directory of Open Access Journals (Sweden)

    Manoel Luiz Gonçalves Corrêa

    2001-02-01

    Full Text Available

    Este trabalho analisa alguns problemas lingüísticos que afetam as práticas da produção e da leitura do texto. Pela noção de deslizamento, busca-se enquadrar essas práticas no interior de uma concepção de linguagem (2º deslizamento, ao mesmo tempo em que se procura mostrar a existência, no uso da linguagem, de um processo de referencialização que oculta a coexistência e o movimento (1º deslizamento entre os fatores tradicionalmente considerados como básicos numa situação de comunicação (referente, remetente e destinatário.

  20. Characteristics of laser clad α-Ti/TiC+(Ti,W)C1-x/Ti2SC+TiS composite coatings on TA2 titanium alloy

    Science.gov (United States)

    Zhai, Yong-Jie; Liu, Xiu-Bo; Qiao, Shi-Jie; Wang, Ming-Di; Lu, Xiao-Long; Wang, Yong-Guang; Chen, Yao; Ying, Li-Xia

    2017-03-01

    TiC reinforced Ti matrix composite coating with Ti2SC/TiS lubricant phases in-situ synthesized were prepared on TA2 titanium alloy by laser cladding with different powder mixtures: 40%Ti-19.5%TiC-40.5%WS2, 40%Ti-25.2%TiC-34.8%WS2, 40%Ti-29.4%TiC-30.6%WS2 (wt%). The phase compositions, microstructure, microhardness and tribological behaviors and wear mechanisms of coatings were investigated systematically. Results indicate that the main phase compositions of three coatings are all continuous matrix α-Ti, reinforced phases of (Ti,W)C1-x and TiC, lubricant phases of Ti2SC and TiS. The microhardness of the three different coatings are 927.1 HV0.5, 1007.5 HV0.5 and 1052.3 HV0.5, respectively. Compared with the TA2 titanium alloy (approximately 180 HV0.5), the microhardness of coatings have been improved dramatically. The coefficients of friction and the wear rates of those coatings are 0.41 and 30.98×10-5 mm3 N-1 m-1, 0.30 and 18.92×10-5 mm3 N-1 m-1, 0.34 and 15.98×10-5 mm3 N-1 m-1, respectively. Comparatively speaking, the coating fabricated with the powder mixtures of 40%Ti-25.2%TiC-34.8%WS2 presents superior friction reduction and anti-wear properties and the main wear mechanisms of that are slight plastic deformation and adhesive wear.

  1. Notas sobre escrofulariáceas de Colombia: I. - Nueva especie de Buchnera afin A B. Rubriflora Philcox

    Directory of Open Access Journals (Sweden)

    Fernández Soto José Luis

    1986-12-01

    Full Text Available Se describe una nueva especie de Buchnera que presenta pilosidad glandular, la única entre las especies americanas del género y próxima a  B. rubriflora Philcox. Se aportan nuevos datos sobre la distribución y variabilidad de esta última, comentando finalmente la relación entre ambos táxones.  Al revisar las escrofulariáceas del Herbario Nacional Colombiano (COL, se tuvo la oportunidad de estudiar una serie de colecciones del género Buchnera, que son el objeto de esta primera nota sobre escrofulariáceas colombianas. Aparte de la localización de nuevos registros de B. rubriflora, que amplían la distribución conocida de la especie y otras puntualizaciones relativas a su parentesco y ecología; sin duda el dato más interesante lo aportó el estudio de unas plantas procedentes del sur de la Sierra de La Macarena (Depto. del Meta, que presentan indumento glandular, mezclado con pilosidad más corta no glandular. Este carácter único conocido hasta ahora en las buchneras americanas, permite describir esta planta como nueva. Este nuevo taxon está morfológicamente relacionado con B. rubriflora, con la que comparte además y con carácter exclusivo en las especies americanas la coloración roja de sus corolas. Se hacen por último algunos comentarios sobre este pequeño grupo de buchneras, del que probablemente falte aún mucho por conocer en cuanto a distribución y diversidad, por la falta de muestreo en amplios territorios colombianos ecológica y geológicamente similares a los enclaves hasta ahora conocidos para estos táxones.

  2. Entre vulgarizações e singularizações: notas sobre a vida social dos balaios

    Directory of Open Access Journals (Sweden)

    Roberta Sampaio Guimarães

    2011-12-01

    Full Text Available Partindo de uma reflexão geral sobre os estudos da "cultura material", neste artigo experimento a rentabilidade analítica das formulações teóricas de Igor Kopytoff, autor que sugeriu a pesquisa do que denominou de biografia cultural dos objetos, enfatizando suas fases de vida e as gradações, sobreposições e recorrências de classificações que os vulgarizavam ou singularizavam em determinada sociedade. E, para buscar um diálogo criativo com esse autor, utilizo notas realizadas durante trabalho de campo junto a integrantes do bloco de carnaval Afoxé Filhos de Gandhi do Rio de Janeiro, composto por praticantes do candomblé e que utilizavam ritualmente "balaios" durante um cortejo religioso pelas ruas da cidade chamado Presente de Iemanjá.Starting from a general reflection on the study of "material culture", in this article I experiment the analytic profitability of the theoretical formulations of Igor Kopytoff, author who suggested a research of the cultural biography of the objects, emphasizing their life stages and the gradations, overlaps and recurrences of classifications that cause their vulgarization or singularization in a given society. And searching a creative dialogue with this author, I use notes taken during a fieldwork with members of the carnival group Afoxé Filhos de Gandhi of Rio de Janeiro, composed of practitioners of Candomble and who used ritually "baskets" during a religious procession in the streets of the city named Yemanja's Gift.

  3. Tailoring ultrafine grained and dispersion-strengthened Ti 2 AlC/TiAl ...

    Indian Academy of Sciences (India)

    In situ Ti 2 AlC/TiAl composite was fabricated by hot-pressing method via the reaction system of Ti 3 AlC 2 and Ti-Al pre-alloyed powders at low temperature of 1150 ∘ C. The composite mainly consisted of TiAl, Ti 3 Al and Ti 2 AlC phases. Fine Ti 2 AlC particles were homogeneously distributed and dispersed in the matrix.

  4. Synthesis of Nano-Ilmenite (FeTiO3) doped TiO2/Ti Electrode for Photoelectrocatalytic System

    Science.gov (United States)

    Hikmawati; Watoni, A. H.; Wibowo, D.; Maulidiyah; Nurdin, M.

    2017-11-01

    Ilmenite (FeTiO3) doped on Ti and TiO2/Ti electrodes were successfully prepared by using the sol-gel method. The structure, morphology, and optical properties of FeTiO3 are characterized by XRD, UV-Vis DRS, and SEM. The FeTiO3 and TiO2 greatly affect the photoelectrocatalysis performance characterized by Linear Sweep Voltammetry (LSV) and Cyclic Voltammetry (CV). The characterization result shows a band gap of FeTiO3 is 2.94 eV. XRD data showed that FeTiO3 formed at 2θ were 35.1° (110), 49.9° (024), and 61.2° (214). The morphology of FeTiO3/Ti and FeTiO3.TiO2/Ti using SEM shows that the formation of FeTiO3 thin layer signifies the Liquid Phase Deposition method effectively in the coating process. Photoelectrochemical (PEC) test showed that FeTiO3.TiO2/Ti electrode was highly oxidation responsive under visible light compared to the FeTiO3/Ti electrodes i.e. 7.87×10-4 A and 9.87×10-5 A. Degradation test of FeTiO3/Ti and FeTiO3.TiO2/Ti electrodes on titan yellow showed that the percentages of degradation with photoelectrocatalysis at 0.5 mg/L were 41% and 43%, respectively.

  5. MicroPET/CT imaging of {alpha}{sub v}{beta}{sub 3} integrin via a novel {sup 68}Ga-NOTA-RGD peptidomimetic conjugate in rat myocardial infarction

    Energy Technology Data Exchange (ETDEWEB)

    Menichetti, Luca; Kusmic, Claudia; Panetta, Daniele; Petroni, Debora; Salvadori, Piero A. [CNR-Institute of Clinical Physiology (IFC), Pisa (Italy); Arosio, Daniela; Manzoni, Leonardo [CNR-Institute of Molecular Science and Technologies (ISTM), Milan (Italy); Matteucci, Marco [Scuola Superiore Sant' Anna, Pisa (Italy); Casagrande, Cesare [University of Milan, Department of Chemistry, Milan (Italy); L' Abbate, Antonio [CNR-Institute of Clinical Physiology (IFC), Pisa (Italy); Scuola Superiore Sant' Anna, Pisa (Italy)

    2013-08-15

    The {alpha}{sub v}{beta}{sub 3} integrin is expressed in angiogenic vessels and is a potential target for molecular imaging of evolving pathological processes. Its expression is upregulated in cancer lesions and metastases as well as in acute myocardial infarction (MI) as part of the infarct healing process. The purpose of our study was to determine the feasibility of a new imaging approach with a novel {sup 68}Ga-2,2',2''-(1,4,7-triazonane-1,4,7-triyl)triacetic acid (NOTA)-arginine-glycine-aspartic acid (RGD) construct to assess integrin expression in the evolving MI. A straightforward labelling chemistry to attach the radionuclide {sup 68}Ga to a NOTA-based chelating agent conjugated with a cyclic RGD peptidomimetic is described. Affinity for {alpha}{sub v}{beta}{sub 3} integrin was assessed by in vitro receptor binding assay. The proof-of-concept in vivo studies combined the {sup 68}Ga-NOTA-RGD with the flow tracer {sup 13}N-NH{sub 3} imaging in order to obtain positron emission tomography (PET)/CT imaging of both integrin expression and perfusion defect at 4 weeks after infarction. Hearts were then processed for immunostaining of integrin {beta}{sub 3}. NOTA-RGD conjugate displayed a binding affinity for {alpha}{sub v}{beta}{sub 3} integrin of 27.9 {+-} 6.8 nM. {sup 68}Ga-NOTA-RGD showed stability without detectable degradation or formation of by-products in urine up to 2 h following injection in the rat. MI hearts exhibited {sup 68}Ga-NOTA-RGD uptake in correspondence to infarcted and border zone regions. The tracer signal drew a parallel with vascular remodelling due to ischaemia-induced angiogenesis as assessed by immunohistochemistry. As compared to similar imaging approaches using the {sup 18}F-galacto-derivative, we documented for the first time with microPET/CT imaging the {sup 68}Ga-NOTA-RGD derivative that appears eligible for PET imaging in animal models of vascular remodelling during evolving MI. The simple chemistry employed to

  6. Homofobia internalizada: o preconceito do homossexual contra si mesmo

    OpenAIRE

    Antunes, Pedro Paulo Sammarco

    2016-01-01

    Ao longo da história a homofobia foi sendo construída. Ela é uma das bases que sustenta as estruturas de poder e todo o funcionamento social em muitos povos. Cinco foram os dispositivos sociais que interditaram o comportamento homossexual: os hábitos, as tradições, a religião, o sistema jurídico e ciências biomédicas. A feminilidade é cuturalmente associada à homossexualidade em homens. A homofobia é composta de alguns elementos, tais como: machismo, heteronormatividade, heterossexismo e miso...

  7. Escritas de si mesmo: os adolescentes e seus blogs

    OpenAIRE

    Freitas, Elisa Aires Rodrigues de; Silva, Luiz Carlos Avelino da

    2014-01-01

    A escrita em diários é uma forma de expressão utilizada pelos adolescentes desde longa data. Na contemporaneidade, o diário migrou do papel para a internet, nos chamados blogs. Nesse artigo se discute a adolescência enquanto uma etapa da construção da identidade e o papel que os diários íntimos eletrônicos vêm adquirindo nos processos de sua elaboração. Seu objetivo foi investigar essas vivências e descrever as funções que as escritas em blogs assumem na vida desses adolescentes. Foram analis...

  8. Evaluated (n,p) cross sections of 46Ti, 47Ti and 48Ti

    International Nuclear Information System (INIS)

    Philis, C.; Bersillon, O.; Smith, D.; Smith, A.

    1977-01-01

    Microscopic evaluated neutron cross sections for the reactions 46 Ti(n;p) 46 Sc, 47 Ti(n;p) 47 Sc and 48 Ti(n;p) 48 Sc are obtained from threshold (or zero energy) to 20 MeV. The results are presented in graphical and numerical (ENDF format) form. The microscopic evaluated cross sections are compared with measured fission-spectrum-averaged values

  9. Evolution process of the synthesis of TiC in the Cu-Ti-C system

    International Nuclear Information System (INIS)

    Liang, Y.H.; Wang, H.Y.; Yang, Y.F.; Wang, Y.Y.; Jiang, Q.C.

    2008-01-01

    The evolution process of TiC formation in the 20 wt.% Cu-Ti-C powder mixtures was studied by using differential thermal analysis (DTA), X-ray diffraction (XRD) and scanning electron microscopy (SEM). The Ti x Cu y compounds (Ti 2 Cu, TiCu, Ti 3 Cu 4 and TiCu 4 ) formed initially via solid-state diffusion reactions between Cu and Ti particles; and then Ti 2 Cu and TiCu can form a Cu-Ti eutectic liquids at about 1233 K. The unreacted Ti and C particles dissolved into the Cu-Ti liquids and led to the formation of Cu-Ti-C ternary liquids; subsequently, TiC particulates precipitated out of the saturated liquids. At the same time, also the formation of Ti 2 Cu occurred at the interface between the Cu-Ti liquids and the unreacted Ti particles. As the temperature increased further, the Ti 2 Cu melted and more Cu-Ti liquids formed; and then C particles continuously dissolved into the Cu-Ti-C liquids and TiC particulates gradually precipitated out of the saturated liquids

  10. Reactive Ni/Ti nanolaminates

    International Nuclear Information System (INIS)

    Adams, D. P.; Bai, M. M.; Rodriguez, M. A.; McDonald, J. P.; Jones, E. Jr.; Brewer, L.; Moore, J. J.

    2009-01-01

    Nickel/titanium nanolaminates fabricated by sputter deposition exhibited rapid, high-temperature synthesis. When heated locally, self-sustained reactions were produced in freestanding Ni/Ti multilayer foils characterized by average propagation speeds between ∼0.1 and 1.4 m/s. The speed of a propagating reaction front was affected by total foil thickness and bilayer thickness (layer periodicity). In contrast to previous work with compacted Ni-Ti powders, no preheating of Ni/Ti foils was required to maintain self-propagating reactions. High-temperature synthesis was also stimulated by rapid global heating demonstrating low ignition temperatures (T ig )∼300-400 deg. C for nanolaminates. Ignition temperature was influenced by bilayer thickness with more coarse laminate designs exhibiting increased T ig . Foils reacted in a vacuum apparatus developed either as single-phase B2 cubic NiTi (austenite) or as a mixed-phase structure that was composed of monoclinic B19 ' NiTi (martensite), hexagonal NiTi 2 , and B2 NiTi. Single-phase, cubic B2 NiTi generally formed when the initial bilayer thickness was made small.

  11. Pravastatin stimulates angiogenesis in a murine hindlimb ischemia model: a positron emission tomography imaging study with (64)Cu-NOTA-TRC105.

    Science.gov (United States)

    Orbay, Hakan; Hong, Hao; Koch, Jill M; Valdovinos, Hector F; Hacker, Timothy A; Theuer, Charles P; Barnhart, Todd E; Cai, Weibo

    2013-01-01

    In this study, (64)Cu-NOTA-TRC105 (TRC105 is an anti-CD105 monoclonal antibody that binds to both human and murine CD105) positron emission tomography (PET) was used to assess the response to pravastatin treatment in a murine model of peripheral artery disease (PAD). Hindlimb ischemia was induced by ligation of the right femoral arteries in BALB/c mice under anesthesia, and the left hindlimb served as an internal control. Mice in the treatment group were given intraperitoneal pravastatin daily until the end of the study, whereas the animals in the control group were injected with 0.9% sodium chloride solution. Laser Doppler imaging showed that blood flow in the ischemic hindlimb plummeted to ~20% of the normal level after surgery, and gradually recovered to near normal level on day 10 in the treatment group and on day 20 in the control group. Angiogenesis was non-invasively monitored and quantified with (64)Cu-NOTA-TRC105 PET on postoperative days 3, 10, 17, and 24. Tracer uptake at 48 h post-injection in the ischemic hindlimb in the treatment group was significantly higher than that of the control group on day 10 (20.5 ± 1.9 %ID/g vs 11.4 ± 1.5 %ID/g), suggesting increased CD105 expression and higher level of angiogenesis upon pravastatin treatment, and gradually decreased to background levels in both groups (4.9 ± 0.8 %ID/g vs 3.4 ± 1.9 %ID/g on day 24). The in vivo PET data correlated well with ex vivo biodistribution studies performed on day 24. Increased CD105 expression on days 3 and 10 following ischemia was further confirmed by immunofluorescence staining. Taken together, our results indicated that (64)Cu-NOTA-TRC105 PET is a suitable and non-invasive method to monitor the angiogenesis and therapeutic response in PAD, which can also be utilized for non-invasive evaluation of other pro-angiogenic/anti-angiogenic drugs in other cardiovascular diseases and cancer.

  12. Using the same CIDR up to three times for estrus synchronization and artificial insemination in dairy goats = Uso do mesmo CIDR por até três vezes para sincronização do estro e inseminação artificial de cabras leiteiras

    Directory of Open Access Journals (Sweden)

    Daniel Maia Nogueira

    2011-07-01

    Full Text Available The objective of this study was to evaluate the effectiveness of reusing a controlled internal drug release (CIDR device for up to three times in the reproductive performance of dairy goats raised in the semi-arid zone of northeastern Brazil. Forty-five goats were allocated into three hormone treatments, as follows: CIDR1x, treated with new CIDR during nine days. Two days prior to device removal, injections of 75 ƒÝg d-cloprostenol and 300 IU equine chorionic gonadotropin (eCG were administrated. For the other treatments, thesame hormone protocol was used, differing only by the use of the same CIDR for a second time in CIDR2x and for a third time in CIDR3x. The interval from device removal to the onset of estrus (13.3 „b 1.1h vs. 13.8 „b 2.6h vs. 13.3 „b 1.4h, as well as estrus duration (33.6 „b 7.3h vs. 29.6 „b 3.2h vs. 32.8 „b 4.5h, did not differ (p > 0.05 among groups CIDR1x, CIDR2x and CIDR3x, respectively. All synchronized females were found to be in estrus. The overall fertility and prolificacy after artificial insemination were 82.2% and 1.9 kids, respectively, without significant difference (p > 0.05 among treatments. The use of the same CIDR for up to three times waseffective using 9-day estrus synchronization protocols in dairy goats.Objetivou-se avaliar o efeito da utilizacao do mesmo dispositivo de liberacao controlada de drogas (CIDR por ate tres vezes sobre odesempenho reprodutivo de cabras leiterias exploradas no semiarido do Nordeste Brasileiro. Foram utilizadas 45 cabras divididas em tres tratamentos de sincronizacao do estro, sendo: CIDR1x, tratadas com CIDR novo durante nove dias. Dois dias antes da retirada do dispositivo, foram aplicados 75 ƒÝg de d-cloprostenol e 300 UI de gonadotrofina corionica equina (eCG. Para os demais tratamentos, foi utilizado o mesmo protocolo hormonal, diferindo apenas pelo uso do mesmo CIDR pela segunda vez no grupo CIDR2x e uso pela terceira vez no grupo CIDR3x. O intervalo entre

  13. Transmissão da doença de Chagas por transplante renal: ocorrência da forma aguda da doença em dois receptores de um mesmo doador Transmission of Chagas' disease through transplantede kidney: occurrence of the acute form of the disease in two recipients from the same donor

    Directory of Open Access Journals (Sweden)

    A.S. Ferraz

    1993-10-01

    Full Text Available São apresentados dois casos de doença de Chagas aguda, adquiridos através de transplante de rins originários de um mesmo doador. O presente relato confirma a transmissão da doença de Chagas a partir do transplante renal e reforça a necessidade de exclusão de doadores renais infectados pelo Trypanosoma cruzi.Two cases of acute Chagas' disease acquired after renal transplantation are reported. The two patients received the kidney from the same donor. The present paper confirms this form of transmission of Chagas' disease and reinforces the need to exclude kidney donors with Trypanosoma cruzi infection.

  14. Microstructure of in-situ Synthesized (TiB+TiC)/Ti Composites Prepared by Hot-pressing

    Institute of Scientific and Technical Information of China (English)

    Zhenzhu ZHENG; Lin GENG; Honglin WANG; Weimin ZHOU; Hongyu XU

    2003-01-01

    In-situ 5 vol.pct TiB whiskers and TiC particulates reinforced Ti composites were fabricated by blending Ti powderand B4C particulates followed by reactive hot-pressing. The microstructure of the composites was investigated byusing differential scanning c

  15. Corrosion behaviour of amorphous Ti 48 Cu 52 , Ti 50 Cu 50 and Ti ...

    Indian Academy of Sciences (India)

    ... Ti60Ni40 in 0.5 M HNO3, 0.5 M H2SO4 and 0.5 M NaOH aqueous media at room temperature. ... maximum for Ti48Cu52 alloy in all the three aqueous media as compared to the remaining two alloys. ... Bulletin of Materials Science | News.

  16. The effects of boron in TiAl/Ti3Al

    International Nuclear Information System (INIS)

    Feng, C.R.; Michel, D.J.; Crowe, C.R.

    1989-01-01

    The authors discuss the TiAl/Ti 3 Al interfacial misfit dislocations structures investigated by TEM in Ti-45Al alloy and Ti-45Al/TiB 2 composite. For TiAl with c/a = 1.02, only a single set of misfit dislocation arrays are crystallographically possible; these were observed in Ti-45Al alloy. However, the observation of three sets of misfit dislocation arrays in the Ti-45Al/TiB 2 composite suggests that the occupation of octahedral sites in the TiAl structure by excess boron was responsible for a decrease in the c/a ratio leading to an increased fcc character of the TiAl at the TiAl/Ti 3 Al interface

  17. Comparison of mechanical behavior of TiN, TiNC, CrN/TiNC, TiN/TiNC films on 9Cr18 steel by PVD

    Science.gov (United States)

    Feng, Xingguo; Zhang, Yanshuai; Hu, Hanjun; Zheng, Yugang; Zhang, Kaifeng; Zhou, Hui

    2017-11-01

    TiN, TiNC, CrN/TiNC and TiN/TiNC films were deposited on 9Cr18 steel using magnetron sputtering technique. The morphology, composition, chemical state and crystalline structure of the films were observed and analyzed by X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and scanning electron microscopy (SEM). Hardness and adhesion force were tested by nanoindentation and scratch tester, respectively. The friction and wear behavior of TiN, TiNC, CrN/TiNC and TiN/TiNC films sliding against GCr15 balls were investigated and compared synthetically using ball-on-disk tribometer. It was found that Tisbnd N, Tisbnd C, Tisbnd Nsbnd C and Csbnd C bonds were formed. The TiN/TiNC film was composed of TiN, TiC and TiNC phases. Hardness and adhesion force results indicated that although the TiN film possessed the highest hardness, its adhesion force was lowest among all the films. Tribological test results showed that the friction coefficient of TiN/TiNC was much lower than that of TiN and the wear rate decreases remarkably from 2.3 × 10-15 m3/Nm to 7.1 × 10-16 m3/Nm, which indicated the TiN/TiNC film has better wear resistance.

  18. Improcedibilità per omessa notifi­cazione del ricorso introduttivo di primo grado e giusto processo (nota ad App. Catania sez. lav. n. 933 del 2011.

    Directory of Open Access Journals (Sweden)

    Massimo Vallone

    2012-01-01

    Full Text Available Riassunto – La nota ripercorre criticamente il non sempre li­neare ragionamento della sentenza commentata che fa appli­cazione al giudizio di primo grado del principio giurispruden­ziale di improcedibilità dell'appello non notificato anche se ri­tualmente e tempestivamente depositato. Il commento conclude escludendo la correttezza ermeneutica della sentenza alla luce dei principi costituzionali anche in relazione alla novella della legge n. 183 del 2010 sull'impugnazione del licenziamento.  Abstract – The review of the judgement on labour trial rules, crit­ically addresses new interpretation and problems posed by case law Appello Catania october 27th, 2011 n. 933, E.I. srl vs. M.M.

  19. El carácter de la intervención intelectual en Notas para la definición de la cultura

    Directory of Open Access Journals (Sweden)

    Florencia Abbate

    2000-11-01

    Full Text Available El artículo aborda el ensayo Notas para la definición de la cultura de Thomas Stearns Eliot (1888-1965, situando al autor en relación con la tradición de la critica inglesa y, particularmente, considerándolo como una figura que entrado el siglo XX recupera la discusión teórica en torno al legado humanista amenazado por la modernidad. Así, recorre las problemáticas del utilitarismo en la democracia de masas y el ascenso de los totalitarismos, ligándolas con el modo en que el autor define la noción de "cultura" y con la alianza que establece entre esta y la de "religión". Por ultimo, considera el modelo de intelectual que se desprende del texto a la luz del contexto histórico-político en que fue producido.

  20. El carácter de la intervención intelectual en Notas para la definición de la cultura

    Directory of Open Access Journals (Sweden)

    Florencia Abbate

    2001-11-01

    Full Text Available El artículo aborda el ensayo Notas para la definición de la cultura de Thomas Stearns Eliot (1888-1965, situando al autor en relación con la tradición de la critica inglesa y, particularmente, considerándolo como una figura que entrado el siglo XX recupera la discusión teórica en torno al legado humanista amenazado por la modernidad. Así, recorre las problemáticas del utilitarismo en la democracia de masas y el ascenso de los totalitarismos, ligándolas con el modo en que el autor define la noción de "cultura" y con la alianza que establece entre esta y la de "religión". Por ultimo, considera el modelo de intelectual que se desprende del texto a la luz del contexto histórico-político en que fue producido.

  1. A Otávia do Pseudo-Sêneca: tradução, estudo introdutório e notas

    OpenAIRE

    Fernanda Vieira Gôzo

    2016-01-01

    Esta pesquisa de mestrado objetivou o estudo da peça latina Otávia do Pseudo-Sêneca, que inclui uma tradução para o português, acompanhada de notas e de um estudo introdutório. Este trabalho centrou-se em apontar o que se têm discutido entre os estudiosos de literatura clássica em relação à peça. Foi pertinente para esse expediente uma análise do gênero praetexta, do qual faz parte esta peça, considerando as divergências entre praetexta republicana e imperial, bem como a observação de como a ...

  2. Isothermal section of the Ti-Si-B system at 1250 ° C in the Ti-TiSi2-TiB2 region

    OpenAIRE

    Ramos, Alfeu Saraiva; Baldan, Renato; Nunes, Carlos Angelo; Coelho, Gilberto Carvalho; Suzuki, Paulo Atsushi; Rodrigues, Geovani

    2013-01-01

    A partial isothermal section (Ti-TiSi2-TiB2 region) of the ternary Ti-Si-B system at 1250 ° C was determined from heat-treated alloys prepared via arc melting. Microstructural characterization has been carried out through scanning electron microscopy (SEM), x-ray diffraction (xRD) and wavelength dispersive spectrometry (WDS). The results have shown the stability of the near stoichiometric Ti6Si2B phase and a negligible solubility of boron in the Ti-silicides as well as of Si in the Ti-borides...

  3. Microstructure and corrosion resistance of TC2 Ti alloy by laser cladding with Ti/TiC/TiB_2 powders

    International Nuclear Information System (INIS)

    Diao, Yunhua; Zhang, Kemin

    2015-01-01

    Highlights: • A TiC/TiB_2 composite coating was produced onto a TC2 Ti alloy by laser cladding with Ti/TiC/TiB_2 powders. • A maximum hardness of 1100 HV was achieved in the laser clad TiC/TiB_2 composite layer. • Corrosion resistance of the TC2 alloy in NaCl (3.5 wt%) aqueous solution can be improved after laser cladding. - Abstract: In the present work, a TiC/TiB_2 composite coating was produced onto a TC2 Ti alloy by laser cladding with Ti/TiC/TiB_2 powders. The surface microstructure, phase components and compositions were characterized with methods of optical microscopy (OM), scanning electron microscopy (SEM), X-ray diffractometry (XRD), and energy dispersive spectrometry (EDS). The cladding layer is consisted of Ti, TiC and TiB_2. And the surface microhardness was measured. After laser cladding, a maximum hardness of 1100 HV is achieved in the laser cladding surface layer, which is more three times higher than that of the TC2 substrate (∼300 HV). Due to the formation of TiC and TiB_2 intermetallic compounds in the alloyed region and grain refinement, the microhardness of coating is higher than TC2 Ti alloy. In this paper, the corrosion property of matrix material and treated samples were both measured in NaCl (3.5 wt%) aqueous solution. From the result we can see that the laser cladding specimens’ corrosion property is clearly becoming better than that of the substrate.

  4. Microstructure and corrosion resistance of TC2 Ti alloy by laser cladding with Ti/TiC/TiB{sub 2} powders

    Energy Technology Data Exchange (ETDEWEB)

    Diao, Yunhua, E-mail: 990722012@qq.com; Zhang, Kemin, E-mail: zhangkm@sues.edu.cn

    2015-10-15

    Highlights: • A TiC/TiB{sub 2} composite coating was produced onto a TC2 Ti alloy by laser cladding with Ti/TiC/TiB{sub 2} powders. • A maximum hardness of 1100 HV was achieved in the laser clad TiC/TiB{sub 2} composite layer. • Corrosion resistance of the TC2 alloy in NaCl (3.5 wt%) aqueous solution can be improved after laser cladding. - Abstract: In the present work, a TiC/TiB{sub 2} composite coating was produced onto a TC2 Ti alloy by laser cladding with Ti/TiC/TiB{sub 2} powders. The surface microstructure, phase components and compositions were characterized with methods of optical microscopy (OM), scanning electron microscopy (SEM), X-ray diffractometry (XRD), and energy dispersive spectrometry (EDS). The cladding layer is consisted of Ti, TiC and TiB{sub 2}. And the surface microhardness was measured. After laser cladding, a maximum hardness of 1100 HV is achieved in the laser cladding surface layer, which is more three times higher than that of the TC2 substrate (∼300 HV). Due to the formation of TiC and TiB{sub 2} intermetallic compounds in the alloyed region and grain refinement, the microhardness of coating is higher than TC2 Ti alloy. In this paper, the corrosion property of matrix material and treated samples were both measured in NaCl (3.5 wt%) aqueous solution. From the result we can see that the laser cladding specimens’ corrosion property is clearly becoming better than that of the substrate.

  5. Microstructure and mechanical properties of Ti/TiN film coated on AISI 304 stainless steel

    International Nuclear Information System (INIS)

    Park, Ji Yoon; Kim, Kwan Hyu; Choe, Han Cheol

    1999-01-01

    The microstructure and mechanical properties of Ti/TiN film coated on AISI 304 stainless steels have been studied. AISI 304 stainless steels containing 0.1∼1.0 wt% Ti were fabricated by using vacuum furnace and followed by solutionization treatment at 1050 .deg. C for 1hr. The specimens were coated by Ti and TiN with 1 μm and 2 μm thickness by electron-beam PVD method. The microstructure and phase analysis were carried out by using XRD, WDS and SEM. Mechanical properties such as hardness (micro-Vickers) and wear resistance were examined. Coated films showed fine columnar structure and some defects. Surface roughness increased in all specimens after TiN coating. XRD patterns showed that the TiN(111) peak was major in TiN single-layer and the other peaks were very weak, but TiN(220) and TiN(200) peaks were developed in Ti/TiN double-layer. The hardness of the coating film was higher in Ti/TiN double-layer than in TiN single-layer and not affected by the Ti content of substrate. Ti/TiN double-layer showed better wear resistance than TiN single-layer. The observed wear traces were sheared type in all coated specimens

  6. Deposition and characterisation of multilayer hard coatings. Ti/TiNδ/TiCxNy/(TiC) a-C:H/(Ti) a-C:H

    International Nuclear Information System (INIS)

    Burinprakhon, T.

    2001-02-01

    Multilayer hard coatings containing Ti, TiNδ, TiC x N y , (TiC m ) a-C:H, (TiC n ) a-C:H, and (Ti) a-C:H were deposited on commercially pure titanium substrates by using an asymmetric bipolar pulsed-dc reactive magnetron sputtering of a titanium target, with Ar, Ar+N 2 , Ar+N 2 +CH 4 , and Ar+CH 4 gas mixtures. The microstructures, elemental compositions and bonding states of the interlayers and the coating surfaces were studied by using cross-sectional transmission electron microscopy (XTEM), electron energy loss spectroscopy (EELS), X-ray diffraction (XRD), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). The microstructure development of the multilayer coating was strongly influenced by target poisoning. As a result of the complete poisoning of the titanium target during the deposition of TiNδ and TiC x N y interlayers, the a-C:H interlayers containing graded titanium and nitrogen contents were found to develop successively to the TiC x N y interlayer without the formation of near-stoichiometric TiC. The (TiC m ) a-C:H interlayer consisted of nano-particles of distorted fcc crystal structure embedded in the a-C:H matrix. The (TiC n ) a-C:H and (Ti) a-C:H top layers were found to be a-C:H matrix without nano-particles. In the (Ti) a-C:H top layer there was no measurable amount of Ti observed, regardless of the variation of CH 4 concentration between 37.5 and 60 % flow rate in Ar+-CH4 gas mixture. The top layer (Ti) a-C:H was found to contain approximately 10 atomic % nitrogen, due to N 2 contamination during deposition caused by low conductance of N 2 through the nominally closed valve of the mass flow controller. The change of the CH 4 concentration during deposition of the top layer (Ti) a-C:H, however, showed a strong influence on the hydrogen content. The comparison of the fluorescence background of the Raman spectra revealed that hydrogen-less (Ti) a-C:H was deposited at a CH 4 concentration of less than 50 % flow rate in Ar. The hardness

  7. Study of TiC+TiN Multiple Films On Type of 316L Stainless Steel

    Institute of Scientific and Technical Information of China (English)

    XUE Qi; JIN Yong; HU Dong-ping; HUANG Ben-sheng; DENG Bai-quan

    2004-01-01

    In this paper, the synthesis process of TiC+TiN multiple films on super-low-carbon stainless steels is reported.The TiC layer is coated as the first layer in the multiple film, the change of growth rate of the film on the 316L Stainless steel is not same as the one on carbides substrates, while the mole ratio of CH4 to TiCl4 (mCH4/TiCl4) is changed from 1.2to 2.0. The Ti [C, N], as a kind of inter-layer between TiC and TiN layers, is helpful to improve the adhesion between the TiC and TiN layer. The cooling rate greatly influences the quality of the adhesion between the TiC+TiN film and substrates.

  8. Study of TiC+TiN Multiple Films On Type of 316L Stainless Steel

    Institute of Scientific and Technical Information of China (English)

    XUEQi; JINYong; HUDong-ping; HUANGBen-sheng; DENGBai-quan

    2004-01-01

    In this paper, the synthesis process of TiC+TiN multiple films on super-low-carbon stainless steels is reported. The TiC layer is coated as the first layer in the multiple film, the change of growth rate of the film on the 316L Stainlesss teel is not same as the one on carbides substrates, while the mole ratio of CH4 to TiCl4 (mCH4/TiCl4) is changed from 1.2 to 2.0. The Ti [C,N], as a kind of inter-layer between TiC and TiN layers, is helpful to improve the adhesion hetween the TiC and TiN layer. The cooling rate greatly influences the quality of the adhesion between the TiC+TiN film and substrates.

  9. Microstructure and Properties of (TiB2 + NiTi)/Ti Composite Coating Fabricated by Laser Cladding

    Science.gov (United States)

    Lin, Yinghua; Lei, Yongping; Fu, Hanguang; Lin, Jian

    2015-10-01

    Agglomerated TiB2 particle and network-like structure-reinforced titanium matrix composite coatings were prepared by laser cladding of the Ni + TiB2 + Ti preplaced powders on Ti-6Al-4V alloy. The network-like structure mainly consisted of NiTi and Ni3Ti. Through the experiment, it was found that the size of agglomerated particle gradually decreased with the increase of Ti content, but the number of the network-like structure first increased and then disappeared. In-situ reaction competition mechanism and the formation of network-like structure were discussed. The average micro-hardness gradually decreased with the increase of Ti content, but the average fracture toughness gradually increased. Meanwhile, the wear resistance of the coatings is higher than that of the substrate, but the wear loss of the coatings is gradually increased with the increase of Ti content.

  10. Characterization of laser deposited Ti6Al4V/TiC composite powders on a Ti6Al4V substrate

    CSIR Research Space (South Africa)

    Mahamood, RM

    2014-01-01

    Full Text Available This paper reports the material characterization of Ti6Al4V/TiC composite produced by laser metal deposition. The Ti6Al4V/TiC composites were deposited with a composition ratio of 50 wt.% Ti64l4V and 50 wt.% TiC. The depositions were achieved...

  11. Fabrication and Characterization of New Ti-TiO2-Al and Ti-TiO2--Pt Tunnel Diodes

    Directory of Open Access Journals (Sweden)

    Yaksh Rawal

    2012-01-01

    Full Text Available Remotely empowered wireless sensor networks use different energy resources including photovoltaic solar cells, wireless power transmission, and batteries. As another option the electromagnetic energy available in the ambient can be harvested to power these remote sensors. This is particularly valuable if it is desirable to harvest the ambient energy available in the wide range of electromagnetic spectrum. This has motivated the research for developing energy harvesting devices which can absorb this energy and produce a DC voltage. Rectenna, an antenna coupled with a rectifier, is the main component used for absorbing electromagnetic radiation at GHz and THz frequencies. Rectifying MIM tunnel diodes are able to operate at tens and hundreds of GHz frequency. As the preliminary steps towards development of high-frequency rectifiers, this paper presents fabrication and DC characterization of two new MIM diodes, Ti-TiO2-Al and Ti-TiO2-Pt. G-V analysis of the fabricated diodes verifies tunneling. Brinkman-Dynes-Rowell model is used to extract oxide thickness of which the derived value is around 9 nm. Ti-TiO2-Pt diode exhibits rectification ratio of 15 at 0.495 V, which is more than rectification ratio reported in earlier works.

  12. Study of excited states in 48Ti, 49Ti and 50Ti by means of radiative neutron capture

    International Nuclear Information System (INIS)

    Ruyl, J.F.A.G.

    1983-12-01

    The γ radiation produced by thermal neutron capture in a natural Ti target and in enriched 47 Ti and 49 Ti targets has been investigated. In the analysis 57 excited states of 48 Ti, 28 of 49 Ti and 31 of 50 Ti have been identified. The values for the 48 Ti and 49 Ti neutron binding energy agree with previous data, the value for 50 Ti differs by five standard deviations. The nature of the neutron capture mechanism has been investigated by comparing the present results with those from previous (d,p) work. It appears that in 47 Ti capture proceeds through a doorway state and that the potential capture mechanism is valid for 48 Ti and 49 Ti. The Fermi gas model gives a good representation of the nuclear level density in all three nuclei. From a measurement of the γ-ray circular polarization resulting from the capture of polarized neutrons, combined with previous (d,p) work, the spins of five 49 Ti levels could be determined, and those of 13 other 49 Ti levels could be confirmed. The combination of nuclear orientation measurements and circular polarization measurements had yielded the unambiguous determination of the spins of one 48 Ti state and of five 50 Ti states. Further spin and parity determinations for six 48 Ti and for five 50 Ti states have been obtained from the analysis of the identified branches together with the results of previous experiments. Shell-model calculations, which yielded excitation energies, branching ratios, lifetimes and (d,p) spectroscopic factors, give a good representation of the experimental data for the low-lying states in both even-even nuclei. (Auth.)

  13. Formation Mechanism of Spherical TiC in Ni-Ti-C System during Combustion Synthesis.

    Science.gov (United States)

    Zhu, Guoliang; Wang, Wei; Wang, Rui; Zhao, Chuanbao; Pan, Weitao; Huang, Haijun; Du, Dafan; Wang, Donghong; Shu, Da; Dong, Anping; Sun, Baode; Jiang, Sheng; Pu, Yilong

    2017-08-29

    The formation mechanism of TiC particles in a Ni-Ti-C system were revealed by using differential thermal analysis (DTA), XRD, and SEM to identify the reaction products in different temperature ranges. The results indicated that the synthesis mechanism of TiC in Ni-Ti-C system was complex; several reactions were involved in the combustion synthesis of TiC-Ni composite. The Ni-Ti intermediate phases play important roles during the formation of TiC. Moreover, the influence of heating rate on the size range of TiC was also discussed.

  14. NOTAS BIBLIOGRÁFICAS

    Directory of Open Access Journals (Sweden)

    Eugenio Rivas

    2017-04-01

    Full Text Available O sacerdote jesuíta espanhol Gerardo R. Vargas recolhe nesta obra sua experiência de mais de 30 anos como professor de Filosofia da Religião na Pontifícia Universidade Javeriana.

  15. Notas del Consejo Editorial

    Directory of Open Access Journals (Sweden)

    Fernando Serpa Florez

    1990-08-01

    Full Text Available

    Merecida Distinción
    Complacidos registrados la señalada distinción de que fue objeto en Hiroshima, Japón, durante la celebración del IX Congreso Mundial de la Organización Internacional a Médicos para la Prevención de la Guerra Nuclear (lPPNW el Académico Honorario Alberto Cárdenas Escovar quien recibió el Premio Albert Schweitzer, en reconocimiento a la meritoria labor que ha cumplido en el campo internacional de la medicina.

    Fernando Serpa Flórez

    Breves de la Academia
    En el número anterior de nuestra revista, por involuntaria omisión no se incluyeron dos señalados acontecimientos, que nos apresuramos a subsanar en la presente edición. Se trata del ingreso a la Corporación de dos distinguidos y muy apreciados Miembros de nuestro Instituto, el Académico correspondiente Joaquín Silva, Profesor de Cirugía y eminente maestro de numerosas generaciones médicas, quien disertó en forma erudita y ponderada sobre el tema “Los albores de la Medicina y Cirugía”. Así mismo tomó posesión como Miembro de Número el actual Presidente del Capítulo de los Santanderes de la Academia Nacional de Medicina, ex-decano de la Escuela de Medicina de la Universidad Industrial de Santander y notable escritor y psiquiátra doctor Roberto Serpa Flórez, quien presentó su libro sobre medicina y enfermedades tropicales en Colombia en la primera mitad de este siglo que, en forma interesante y amena, desarrolló alrededor de la biografía de su padre, el también Académico de Número profesor Roberto Serpa Novoa.

  16. Notas sobre apendicitis aguda

    OpenAIRE

    Méndez S., Martín

    2011-01-01

    Hacer un buen diagnóstico, tener el valor de la responsabilidad operando precozmente los enfermos, en los cuales después de minucioso examen se cree o se tiene certeza de una apendicitis aguda, es uno de los méritos de todo buen cirujano. Sin duda tendrá que luchar contra todo, la familia, el enfermo y los allegados; pero si triunfa y vence logrará éxitos y salvará vidas. Parece fácil diagnosticar unaapendicitis aguda y sin embargo, es necesario decirlo claro, nada hay tan complicado y en oca...

  17. Notas sobre apendicitis aguda

    Directory of Open Access Journals (Sweden)

    Martín Méndez S.

    1933-04-01

    apendicitis aguda y sin embargo, es necesario decirlo claro, nada hay tan complicado y en ocasiones tan oscuro. Sin duda, a medida que los conocimientos clínicos se extienden, se va iluminando el campo, antes inexplorado, de la cirugía apendicular, y hoy día casi todos los médicos y cirujanos tienen un criterio científico muy bien formado para lograr hacer un buen diagnóstico y aconsejar o llevar a cabo una intervención quirúrgica.

  18. Notas sobre el che

    Directory of Open Access Journals (Sweden)

    Virginia Bertolotti

    2010-06-01

    Full Text Available In the present work, I review, in the first place, the bibliography that summarizes the discussion surrounding the etymology of the word che. Then, I analyze the uses of this term in the diachrony as in the synchrony of the Río de la Plata Spanish, which allows me to propose a classification of the uses of the word che in this region. In the third part of the article, I discuss the categorial adscrption of the word che. Finally, the categorial analysis of the diachronic and synchronic empirical evidence allows me to conclude that the vocative uses of the term are a loan from the nominal determinant of the guaraní language, and not a phonic change in the Spanish interjection, thus resolving the etymological issues.

  19. Nota do Editor

    Directory of Open Access Journals (Sweden)

    André Luis Calado Araújo

    2007-12-01

    Full Text Available Nesta edição estamos apresentando sete artigos sendo quatro contribuições internas (professores e alunos e três contribuições externas. Entre os temas, destaca-se a área de Educacional com três artigos, abordando entre outros os efeitos do vestibular na educação e na sociedade, a utilização de textos televisivos nas aulas de educação física e, as implicações da reforma do Ensino Profissional e do Programa de Expansão da Educação Profissional sobre o projeto político pedagógico do CEFET-RN. Na área de administração é apresentado um artigo sobre o estudo de caso de três empresas produtoras de melão em Mossoró-RN. O setor de informática está representado pelo texto sobre a concepção de sistemas especialistas para a aquisição de conhecimentos, enquanto que na área de estatística é apresentado uma proposta para avaliação de satisfação de clientes através do uso do coeficiente de correlação de concordância. Finalmente, na área ambiental é apresentada uma discussão sobre a disponibilidade hídrica, a necessidade de reutilização das águas residuárias, bem como as diversas possibilidades de reuso.

  20. Nota do Editor

    Directory of Open Access Journals (Sweden)

    André Luis Calado Araújo

    2007-12-01

    Full Text Available Nesta edição a Holos apresenta sete artigos. Seis artigos são de autoria de professores e alunos do CEFET-RN, e um artigo é contribuição de autores externos. Das seis contribuições internas, cinco são inéditos e um foi selecionado entre os trabalhos apresentados no III Congresso de Iniciação Científica do CEFETRN – III CONGIC. O artigo externo foi apresentado no XXI Encontro Nacional de Tratamento de Minérios e Metalurgia Extrativa, realizado em Natal-RN, de 20 a 24 de novembro de 2005.

  1. Notas de um erudito

    Directory of Open Access Journals (Sweden)

    Isabel Lustosa

    2017-07-01

    Full Text Available Esta colaboração especial para o Dossiê Pensamento Político Brasileiro, organizado por Vera Cepêda, da UFSCar, e Josnei Di Carlo, da UFSC, é uma resenha do livro O índio brasileiro e a Revolução Francesa, lançado originalmente em 1937 por Afonso Arinos de Melo Franco e reeditado em 2000.

  2. Nota a los lectores

    Directory of Open Access Journals (Sweden)

    Blasco Fernando Checa Montúfar

    2015-01-01

    Full Text Available Tres temas de fondo hacen esta publicación: Periodismo y democracia, Legislación de medios en América Latina y Comunicación con extraterrestres. En el primer caso con variedad de enfoques busca contribuir a crear responsabilidad en el periodismo como servicio y bien público, de los medios como espacios de diálogo social sobre los cuales se edifique la democracia. Se presentan algunas ponencias del Encuentro del G-8, realizado en Caracas en Noviembre de 1996 Seminario "Legislación de Medios en América Latina", especialmente el de radiodifusión y la necesidad de democratizar el espectro más otros artículos relacionados con el tema. En cuanto a las inquietudes de cómo establecer o responder a la comunicación si llegaran o se contactaran los extraterrestres, los integrantes del Comité S.E.T.I. (Search Extraterrestrial Intelligence vienen analizando en varios foros internacionales tres de los cuales se realizaron en Capri, Toronto y Beijing.

  3. NOTAS SOBRE TUTAMEIA­

    Directory of Open Access Journals (Sweden)

    Danielle Corpas

    2012-07-01

    Full Text Available In Tutameia, watchwords of modernizing order and sociability shaped by the Brazilian proslavery past are overlapped. This article focuses on narratives from Guimarães Rosa´s last book, in which we find clear relationships between, on one hand, anomy and patriarchal customs, and on the other, resources, mentality and aesthetics apparently confronted with these customs.

  4. Notas para The Waste Land: T. S. Eliot e a máquina literária = Notes on The Waste Land: T. S. Eliot and the literary machine

    Directory of Open Access Journals (Sweden)

    Cechinel, André

    2014-01-01

    Full Text Available Este artigo propõe-se a investigar o suposto papel explicativo atribuído às notas que T. S. Eliot acrescentou ao poema The Waste Land quando de sua publicação. Para tanto, o texto volta a sua atenção, em particular, para três das várias observações em que o poeta expõe as referências por ele consultadas e referidas nos versos, isso com o intuito de verificar se de fato há um esclarecimento interpretativo prestado ao poema graças à inclusão das notas. Em linhas gerais, o choque entre os versos de The Waste Land e as notas autorais provoca um impasse que aciona o que aqui chamamos de uma “máquina literária” produtora de teses. Essa máquina, compreendida a partir de seu mecanismo estruturante, não só recusa a sugestão de que o entendimento do poema decorre da decodificação apropriada das fontes, como também produz um efeito plural responsável por desestabilizar a hierarquia classicista e canônica que a crítica literária por décadas viu ali instalada

  5. Fabrication and Mechanical Properties of TiC/TiAl Composites

    Institute of Scientific and Technical Information of China (English)

    YUE Yun-long; GONG Yan-sheng; WU Hai-tao; WANG Chuan-bin; ZHANG Lian-meng

    2004-01-01

    TiC/TiAl composites with different TiC content were fabricated by rapid heating technique ofspark plasma sintering (SPS). The effect of TiC particles on microstructure and mechanical properties of TiAl matrix was investigated. The results indicate that grain sizes of TiAl matrix decrease and mechanical properties are improved because of the addition of TiC particles. The composites display a 26.8% increase in bending strength when10wt% TiC is added and 43.8% improvement in fracture toughness when 5 wt % TiC is added compared to valuesof TiC-free materials. Grain-refinement and dispersion-strengthening were the main strengthening mechanism. Theimprovement of fracture toughness was due to the deflexion of TiC particles to the crack.

  6. Electrosynthesis of Ti5Si3, Ti5Si3/TiC, and Ti5Si3/Ti3SiC2 from Ti-Bearing Blast Furnace Slag in Molten CaCl2

    Science.gov (United States)

    Li, Shangshu; Zou, Xingli; Zheng, Kai; Lu, Xionggang; Chen, Chaoyi; Li, Xin; Xu, Qian; Zhou, Zhongfu

    2018-04-01

    Ti5Si3, Ti5Si3/TiC, and Ti5Si3/Ti3SiC2 have been electrochemically synthesized from the Ti-bearing blast furnace slag/TiO2 and/or C mixture precursors at a cell voltage of 3.8 V and 1223 K to 1273 K (950 °C to 1000 °C) in molten CaCl2. The pressed porous mixture pellets were used as the cathode, and a solid oxide oxygen-ion-conducting membrane (SOM)-based anode was used as the anode. The phase composition and morphologies of the cathodic products were systematically characterized. The final products possess a porous nodular microstructure due to the interconnection of particles. The variations of impurity elements, i.e., Ca, Mg, and Al, have been analyzed, and the result shows that Ca and Mg can be almost completely removed; however, Al cannot be easily removed from the pellet due to the formation of Ti-Al alloys during the electroreduction process. The electroreduction process has also been investigated by the layer-depended phase composition analysis of the dipped/partially reduced pellets to understand the detailed reaction process. The results indicate that the electroreduction process of the Ti-bearing blast furnace slag/TiO2 and/or C mixture precursors can be typically divided into four periods, i.e., (i) the decomposition of initial Ca(Mg,Al)(Si,Al)2O6, (ii) the reduction of Ti/Si-containing intermediate phases, (iii) the removal of impurity elements, and (iv) the formation of Ti5Si3, TiC, and Ti3SiC2. It is suggested that the SOM-based anode process has great potential to be used for the direct and facile preparation of Ti alloys and composites from cheap Ti-containing ores.

  7. Study of the preparation of Cu-TiC composites by reaction of soluble Ti and ball-milled carbon coating TiC

    Science.gov (United States)

    Xu, Xuexia; Li, Wenbin; Wang, Yong; Dong, Guozhen; Jing, Shangqian; Wang, Qing; Feng, Yanting; Fan, Xiaoliang; Ding, Haimin

    2018-06-01

    In this work, Cu-TiC composites have been successfully prepared by reaction of soluble Ti and carbon coating TiC. Firstly, the ball milling of graphite and TiC mixtures is used to obtain the carbon coating TiC which has fine size and improved reaction activity. After adding the ball milled carbon coating TiC into Cu-Ti melts, the soluble Ti will easily react with the carbon coating to form TiC. This process will also improve the wettability between Cu melts and TiC core. As a result, besides the TiC prepared by reaction of soluble Ti and carbon coating, the ball milled TiC will also be brought into the melts. Some of these ball-milled TiC particles will go on being coated by the formed TiC from the reaction of Ti and the coating carbon and left behind in the composites. However, most of TiC core will be further reacted with the excessive Ti and be transformed into the newly formed TiC with different stoichiometry. The results indicate that it is a feasible method to synthesize TiC in Cu melts by reaction of soluble Ti and ball-milled carbon coating TiC.

  8. Material characteristic of Ti alloy (Ti-6Al-4V)

    International Nuclear Information System (INIS)

    Toyoshima, Noboru

    1997-03-01

    In regard to material characteristic of Ti alloy (Ti-6Al-4V), the following matters are provided by experiments. 1) In high temperature permeation behavior of implanted deuterium ion (0.5keV, 6.4 x 10 18 D + ions/m 2 s, ∼760deg K), the ratio of permeation flux to incident flux ranges from 3.3 x 10 -3 at 633deg K to 4.8 x 10 -3 at 753deg K. The activation energy of permeation is 0.12eV in this temperature region above 600deg K. At temperatures below 600deg K, the permeation flux of deuterium decreases drastically and the implanted ions remain in the alloy. 2) Radioactivation analysis using 14MeV fast neutron shows that Ti-6Al-4V alloy contains higher values of principal ingredients, Al, V, Fe, than that recorded at the chemical composition of Ti alloy, and also, contains impurities with Ni, Co and Mn. 3) Fraction of about 0.095wt% H 2 were absorbed in the test specimens, and tensile strength test was carried out. Under the condition of the hydrogen pressure 50 torr and temperature ∼500degC. The results show that there is no degradation in mechanical properties for absorption of with less than 0.04wt% H 2 . The tensile strength of wilding specimens have almost the same as that without wilding. Ti alloy, as a material of vacuum vessel of nuclear fusion device, must be selected to that with less impurities, particularly Co, by radioactivation analysis, and must be used under the temperature of 200-300degC, where hydrogen absorption does not make too progress. It is considered that Ti alloy can be used with less than 0.04wt% H 2 absorption in viewpoint of material mechanical strength. (author)

  9. Structural comparison of sintering products made of "TiC + Ti" composite powders and "Ti + C" powder mixtures

    Science.gov (United States)

    Krinitcyn, Maksim G.; Pribytkov, Gennadii A.; Korosteleva, Elena N.; Firsina, Irina A.; Baranovskii, Anton V.

    2017-12-01

    In this study, powder composite materials comprised of TiC and Ti with different ratios are processed by sintering of Ti and C powder mixtures and self-propagating high-temperature synthesis (SHS) in "Ti+C" system followed by sintering. The microstructure and porosity of obtained composites are investigated and discussed. The dependence of porosity on sintering time is explained theoretically. Optimal regimes that enable to obtain the most homogeneous structure with the least porosity are described.

  10. Instituições e Políticas Moldando o Desenvolvimento Industrial: uma nota introdutória

    Directory of Open Access Journals (Sweden)

    Joseph Stiglitz

    2007-01-01

    Full Text Available Neste trabalho, elaborado como introdução às contribuições da força-tarefa sobre Políticas Industriais e Desenvolvimento, Iniciativa para o Diálogo sobre Políticas (Columbia University, Nova York, discutimos o papel das instituições e políticas no processo de desenvolvimento. Iniciamos argumentando sobre o quanto a terminologia das “falhas de mercado” pode ser enganosa para avaliar a necessidade de políticas públicas por fazer essa avaliação com base num padrão de medida que é raramente observado em qualquer mercado. Muito mais próximos da evidência empírica, nós argumentamos que mesmo quando o mercado prevalece como forma de governança de interações econômicas, estas se encontram entranhadas numa rica malha de instituições não-mercado. Isto se aplica de modo geral e particularmente à produção e uso de informação e conhecimento tecnológico. Neste trabalho nos baseamos nesse entranhamento institucional fundamental de processos de aprendizado tecnológico, tanto em países desenvolvidos quanto em países que buscam alcançar afronteira tecnológica (catching-up, e tentamos identificar alguns ingredientes robustos de políticas que têm historicamente acompanhado a co-evolução de capacitações tecnológicas, formas de organização das empresas, e mecanismos de incentivos. Todas as experiências bem-sucedidas de catching-up e, às vezes, superação dos líderes econômicos prevalecentes – a começar pelos Estados Unidos em relação à Grã-Bretanha – envolveram “construção institucional” e medidas de políticas que afetam a imitação tecnológica, a organização de indústrias, padrões de comércio internacional, e direitos de propriedade intelectual. Argumentamos que isto certamente se aplica hoje também, mesmo no contexto de uma economia mundial “globalizada”.In this work, meant as an introduction to the contributions of the task force on Industrial Policies and Development, Initiative

  11. MicroPET/CT imaging of patient-derived pancreatic cancer xenografts implanted subcutaneously or orthotopically in NOD-scid mice using 64Cu-NOTA-panitumumab F(ab')2 fragments

    International Nuclear Information System (INIS)

    Boyle, Amanda J.; Cao, Ping-Jiang; Hedley, David W.; Sidhu, Sachdev S.; Winnik, Mitchell A.; Reilly, Raymond M.

    2015-01-01

    Introduction: Our objective was to study microPET/CT imaging of patient-derived pancreatic cancer xenografts in NOD-scid mice using F(ab') 2 fragments of the fully-human anti-EGFR monoclonal antibody, panitumumab (Vectibix) labeled with 64 Cu. More than 90% of pancreatic cancers are EGFR-positive. Methods: F(ab') 2 fragments were produced by proteolytic digestion of panitumumab IgG or non-specific human IgG, purified by ultrafiltration then modified with NOTA chelators for complexing 64 Cu. Panitumumab IgG and Fab fragments were similarly labeled with 64 Cu. EGFR immunoreactivity was determined in competition and direct (saturation) cell binding assays. The biodistribution of 64 Cu-labeled panitumumab IgG, F(ab') 2 and Fab was compared in non-tumor-bearing Balb/c mice. MicroPET/CT and biodistribution studies were performed in NOD-scid mice engrafted subcutaneously (s.c.) or orthotopically with patient-derived OCIP23 pancreatic tumors, or in NOD-scid with s.c. PANC-1 human pancreatic cancer xenografts. Results: Panitumumab F(ab') 2 fragments were produced in high purity (> 90%), derivitized with 3.2 ± 0.7 NOTA/F(ab') 2 , and labeled with 64 Cu (0.3–3.6 MBq/μg). The binding of 64 Cu-NOTA-panitumumab F(ab') 2 to OCIP23 or PANC-1 cells was decreased significantly by an excess of panitumumab IgG. The K d for binding of 64 Cu-NOTA-panitumumab F(ab') 2 to EGFR on PANC-1 cells was 0.14 ± 0.05 nmol/L. F(ab') 2 fragments exhibited more suitable normal tissue distribution for tumor imaging with 64 Cu than panitumumab IgG or Fab. Tumor uptake at 48 h post injection (p.i.) of 64 Cu-NOTA-panitumumab F(ab') 2 was 12.0 ± 0.9% injected dose/g (ID/g) in s.c. and 11.8 ± 0.9% ID/g in orthotopic OCIP23 tumors vs. 6.1 ± 1.1% ID/g in s.c. PANC-1 xenografts. Tumor/Blood (T/B) ratios were 5:1 to 9:1 for OCIP23 and 2.4:1 for PANC-1 tumors. Tumor uptake of 64 Cu-NOTA-non-specific F(ab') 2 in OCIP23 xenografts was 5-fold lower than 64

  12. Ti/TiO 2 nanotube array electrode as a new sensor to ...

    Indian Academy of Sciences (India)

    The Ti/TiO2 nanotube array (Ti-NTA) electrode was prepared by anodizing of the Ti foil ... and the pH=3.0 and =1.0 V (vs. reference electrode) were determined as the ... It was found that the photocurrent of EG was linearly dependent on the ...

  13. Nitrogen implantation of Ti and Ti+Al films deposited on tool steel

    International Nuclear Information System (INIS)

    Huang, C.-T.; Duh, J.-G.

    1995-01-01

    Titanium and aluminum thin films were deposited onto A2 steel by rf magnetron sputtering with various Al contents. The coated assembly was then implanted with nitrogen ions at 92 kV and 1 mA for 4.5 h. The thickness of the implanted Ti and Ti+Al films deposited for 1 h was around 0.4-0.5 μm. With the aid of X-ray diffraction by the grazing-incidence technique, secondary ion mass spectrum (SIMS) and X-ray photoelectron spectroscopy (XPS), the titanium oxide and titanium nitride were identified on the top and inner surface in the implanted Ti film. For Ti+Al films after nitrogen implantation, Ti 3 O 5 was formed on the top surface beneath which is a (Ti, Al) N solid solution. There was Ti 2 N compound formed in the implanted Ti film, while only a minor amount of Ti 2 N phase was observed in the inner region in the implanted Ti+Al film. The nitrogen distribution was flattened and spread in the implanted Ti film, while a concentration gradient was observed in the Ti+Al film after implantation. The measured surface hardness of implanted Ti film was higher than those of Ti+Al films and the hardness of implanted Ti+39%Al film was enhanced as compared to the Ti+50%Al film. (Author)

  14. The martensitic transformation in Ti-rich TiNi shape memory alloys

    International Nuclear Information System (INIS)

    Lin, H.C.; Wu, S.K.; Lin, J.C.

    1994-01-01

    The martensitic (Ms) transformation temperatures and their ΔH values of Ti 51 Ni 49 and Ti 50.5 Ni 49.5 alloys are higher than those of equiatomic or Ni-rich TiNi alloys. The Ti-rich TiNi alloys exhibit good shape recovery in spite of a great deal of second phase Ti 2 Ni or Ti 4 Ni 2 O existing around B2 grain boundaries. The nearly identical transformation temperatures indicate that the absorbed oxygen in Ti-rich TiNi alloys may react with Ti 2 Ni particles, instead of the TiNi matrix, to form Ti 4 Ni 2 O. Martensite stabilization can be induced by cold rolling at room temperature. Thermal cycling can depress the transformation temperatures significantly, especially in the initial 20 cycles. The R-phase transformation can be promoted by both cold rolling and thermal cycling in Ti-rich TiNi alloys due to introduced dislocations depressing the Ms temperature. The strengthening effects of cold rolling and thermal cycling on the Ms temperature of Ti-rich TiNi alloys are found to follow the expression Ms = To - KΔσ y . The K values are affected by different strengthening processes and related to the as-annealed transformation temperatures. The higher the as-annealed Ms (or As), the larger the K value. (orig.)

  15. 微量TiC对Mo-Ti-Zr-TiC合金性能与显微组织的影响%Effect of Trace TiC on Property and Microstructure of Mo-Ti-Zr-TiC Alloy

    Institute of Scientific and Technical Information of China (English)

    钱昭; 范景莲; 成会朝; 田家敏

    2012-01-01

    采用粉末冶金方法制备Mo-Ti-Zr-TiC合金,研究微量TiC的添加对Mo-Ti-Zr-TiC合金的拉伸性能和显微组织的影响.结果表明,在Mo-Ti-Zr合金中添加微量TiC(0.1%~0.5%,质量分数)后,合金的相对密度和室温抗拉强度得到了提高,当TiC添加量为0.4%时,合金强度最高,较Mo-Ti-Zr合金提高了28.1%.微量TiC的添加,阻碍了合金烧结过程中的晶粒长大,合金晶粒尺寸随TiC添加量的增加而降低.添加的细小TiC粒子在高温烧结过程中或与坯体中的微量氧发生反应形成了由Mo、Ti、C及O 4种元素组成的(Mo,Ti)xOyCz细小复合第二相粒子,或发生团聚结成大颗粒,对合金起到净化晶界氧和弥散强化的作用,因而合金的性能相比Mo-Ti-Zr合金有了较明显的提高.%Mo-Ti-Zr-TiC alloy was prepared via powder metallurgy method. The effects of trace TiC additive on the mechanical properties and microstructure of TiC reinforced Mo-Ti-Zr-TiC alloy were studied. The results indicate that the relative density and the tensile strength at room temperature of Mo-Ti-Zr-TiC alloy is effectively enhanced by adding trace TiC (0.1wt%~0.5wt%). The tensile strength achieves the highest value when the content of TiC is 0.4wt%, which is 28.1% higher than that of Mo-Ti-Zr alloy. The adding of trace TiC can inhibit the grain growth during alloy sintering process, which leads to the decrease of grain sizes with the rise of TiC content. A part of the fine TiC particles react with trace oxygen in molybdenum matrix to form (Mo,Ti)xOyC2 compound second phase particles during high temperature sintering, while the other part are agglomerated into large particles, which play a role in grain boundaries purification and dispersion-strengthening.

  16. Os impactos da Nota Fiscal eletrônica nas microempresas e empresas de pequeno porte sediadas em Umuarama/PR

    Directory of Open Access Journals (Sweden)

    Luiz Carlos da Silva

    2014-03-01

    Full Text Available A globalização propiciou mudanças de hábitos, de consumo, de produção de bens, de serviços e de conhecimento. A contabilidade, ferramenta imprescindível para a tomada de decisão empresarial e governamental, é parte inerente nesse contexto em virtude, principalmente, do seu papel social. Nesse cenário, o Governo Federal instituiu, por meio do Decreto nº 6.022, de 22 de janeiro de 2007, o Sistema Público de Escrituração Digital (SPED que, dentre seus subprojetos, propõe a Nota Fiscal Eletrônica (NF-e, processo eletrônico de emissão de notas fiscais que utiliza a Tecnologia de Informação para reduzir as despesas com papel e armazenagem de documentos, e contribui para a diminuição das obrigações acessórias. A presente pesquisa objetivou analisar os impactos causados nas Microempresas (MEs e Empresas de Pequeno Porte (EPPs sediadas em Umuarama/PR, quanto à implantação da NF-e e a percepção dos gestores sobre os objetivos e benefícios preconizados pelo Governo Federal. Esta pesquisa, quanto à sua natureza, é classificada como aplicada, descritiva, indutiva, com caráter exploratório e de abordagem quanti-qualitativa. O instrumento de pesquisa e levantamento de dados adotado foi um questionário semiestruturado com perguntas abertas e fechadas, aplicado em setembro de 2011 com uma amostra de pesquisa composta por trinta empresas do município escolhido. Os resultados apontam que os principais impactos sofridos com a implantação da NF-e foram: mudança de processos internos, necessidade de investimentos em tecnologia e aumento nos custos totais, bem como a divergência parcial do preconizado pelo Governo Federal no que concerne à percepção do empresariado relativamente aos objetivos e benefícios da ferramenta.  

  17. The dynamics of TiN{sub x} (x = 1–3) admolecule interlayer and intralayer transport on TiN/TiN(001) islands

    Energy Technology Data Exchange (ETDEWEB)

    Edström, D., E-mail: daned@ifm.liu.se [Department of Physics, Chemistry and Biology (IFM), Linköping University, SE-58183 Linköping (Sweden); Sangiovanni, D.G.; Hultman, L. [Department of Physics, Chemistry and Biology (IFM), Linköping University, SE-58183 Linköping (Sweden); Petrov, I.; Greene, J.E. [Department of Physics, Chemistry and Biology (IFM), Linköping University, SE-58183 Linköping (Sweden); Frederick Seitz Materials Research Laboratory and the Materials Science Department, University of Illinois at Urbana-Champaign, Urbana, IL 61801 (United States); Chirita, V. [Department of Physics, Chemistry and Biology (IFM), Linköping University, SE-58183 Linköping (Sweden)

    2015-08-31

    It has been shown both experimentally and by density functional theory calculations that the primary diffusing species during the epitaxial growth of TiN/TiN(001) are Ti and N adatoms together with TiN{sub x} complexes (x = 1, 2, 3), in which the dominant N-containing admolecule species depends upon the incident N/Ti flux ratio. Here, we employ classical molecular dynamics (CMD) simulations to probe the dynamics of TiN{sub x} (x = 1–3) admolecules on 8 × 8 atom square, single-atom-high TiN islands on TiN(001), as well as pathways for descent over island edges. The simulations are carried out at 1000 K, a reasonable epitaxial growth temperature. We find that despite their lower mobility on infinite TiN(001) terraces, both TiN and TiN{sub 2} admolecules funnel toward descending steps and are incorporated into island edges more rapidly than Ti adatoms. On islands, TiN diffuses primarily via concerted translations, but rotation is the preferred diffusion mechanism on infinite terraces. TiN{sub 2} migration is initiated primarily by rotation about one of the N admolecule atoms anchored at an epitaxial site. TiN admolecules descend from islands by direct hopping over edges and by edge exchange reactions, while TiN{sub 2} trimers descend exclusively by hopping. In contrast, TiN{sub 3} admolecules are essentially stationary and serve as initiators for local island growth. Ti adatoms are the fastest diffusing species on infinite TiN(001) terraces, but on small TiN/TiN(001) islands, TiN dimers provide more efficient mass transport. The overall results reveal the effect of the N/Ti precursor flux ratio on TiN(001) surface morphological evolution and growth modes. - Highlights: • Classical MD is used to model TiN{sub x} admolecule dynamics on TiN/TiN(001) islands. • TiN{sub x} admolecules descend from islands by both direct hopping and exchange reactions. • TiN and TiN{sub 2} exhibit surprisingly high diffusivities on TiN/TiN(001) islands. • TiN{sub 3} tetramers are

  18. Deposit of thin films of TiN, a-C, Ti/TiN/a-C by laser ablation; Deposito de peliculas delgadas de TiN, a-C, Ti/TiN/a-C por ablacion laser

    Energy Technology Data Exchange (ETDEWEB)

    Mejia, I.S.; Escobar A, L.; Camps, E.; Romero, S. [ININ, 52045 Ocoyoacac, Estado de mexico (Mexico); Muhl, S. [IIM, UNAM, A.P. 364, 01000 Mexico D.F. (Mexico)

    2006-07-01

    Thin films of titanium nitride (TiN), amorphous carbon (a-C), as well as bilayers of Ti/TiN/a-C were deposited by means of the laser ablation technique. It was investigated the effect that it has the laser fluence used to ablation the targets in the structure and mechanical properties of the TiN deposited films. The TiN obtained films have a preferential orientation in the direction (200). The results show that the hardness of this material is influenced by the laser fluence. It is observed that the hardness is increased in an approximately lineal way with the increment of the fluence up to 19 J/cm{sup 2}. The films of amorphous carbon present hardness of the order of 11.2 GPa. Likewise it was found that the multilayers of Ti/TiN/aC presented a bigger hardness that of its individual components. (Author)

  19. Periodic modeling of zeolite Ti-LTA.

    Science.gov (United States)

    Hernandez-Tamargo, Carlos E; Roldan, Alberto; Ngoepe, Phuti E; de Leeuw, Nora H

    2017-08-21

    We have proposed a combination of density functional theory calculations and interatomic potential-based simulations to study the structural, electronic, and mechanical properties of pure-silica zeolite Linde Type A (LTA), as well as two titanium-doped compositions. The energetics of the titanium distribution within the zeolite framework suggest that the inclusion of a second titanium atom with configurations Ti-(Si) 0 -Ti, Ti-(Si) 1 -Ti, and Ti-(Si) 2 -Ti is more energetically favorable than the mono-substitution. Infra-red spectra have been simulated for the pure-silica LTA, the single titanium substitution, and the configurations Ti-(Si) 0 -Ti and Ti-(Si) 2 -Ti, comparing against experimental benchmarks where available. The energetics of the direct dissociation of water on these Lewis acid sites indicate that this process is only favored when two titanium atoms form a two-membered ring (2MR) sharing two hydroxy groups, Ti-(OH) 2 -Ti, which suggests that the presence of water may tune the distribution of titanium atoms within the framework of zeolite LTA. The electronic analysis indicates charge transfer from H 2 O to the Lewis acid site and hybridization of their electronic states.

  20. Observed magnetic dipole transitions in the ground terms of Ti XIV, Ti XV, and Ti XVII

    International Nuclear Information System (INIS)

    Suckewer, S.; Fonck, R.; Hinnov, E.

    1979-09-01

    Four observed spectrum lines in titanium-containing tokamak discharges have been identified as follows: TiXIV 2s 2 2p 5 2 P/sub 1/2/ → 2 P/sub 3/2/ at 2115.3 A, TiXV 2s 2 2p 4 3P 1 → 3 P 2 at 2544.8 A, TiXVII 2s 2 2p 2 3 P 2 → 3 P 1 at 3834.4 A and 3 P 1 → 3 P 0 at 3371.5 A. The identifications are based on observed time behavior and correlation with intensities of resonance lines of other titanium ions, and on general agreement with predicted wavelengths and intensities

  1. Microstructure Characteristic of In-situ Ti/TiC Composites

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    TiC reinforced titanium composites has been produced with different Al content and C content by XDTM. The results have shown that TiC particles are of two different morphologies: coarse dendritical primary TiC and short bar-shape eutectic TiC. Al content has great effects on the morphology of TiC. With the increasing of Al content, the morphology of primary TiC changes from coarse developed dendrite into short bar-shape or plate-shape TiC with 35%Al. Meanwhile, the structure of the matrix changes from single Ti to Ti and Ti3Al, and to Ti3Al and TiAl. However, the C content has no influence on the microstructure of matrix. When the C content is less than 1.2%, the dendrite TiC disappears and only short bar-shape or plate-shape TiC exists in the composites. In addition, the effect of heat treatment on the morphology of TiC has also studied.

  2. Study of preparation of TiB2 by TiC in Al melts

    International Nuclear Information System (INIS)

    Ding Haimin; Liu Xiangfa; Nie Jinfeng

    2012-01-01

    TiB 2 particles are prepared by TiC in Al melts and the characteristics of them are studied. It is found that TiC particles are unstable when boron exists in Al melts with high temperature and will transform to TiB 2 and Al 4 C 3 . Most of the synthesized TiB 2 particles are regular hexagonal prisms with submicron size. The diameter of the undersurfaces of these prisms is ranging from 200 nm to 1 μm and the height is ranging from 100 nm to 300 nm. It is considered that controlling the transformation from TiC to TiB 2 is an effective method to prepare small and uniform TiB 2 particles. - Highlights: ► TiC can easily transform into TiB 2 in Al melts. ► TiB 2 formed by TiC will grow into regular hexagonal prisms with submicron size. ► Controlling the transformation from TiC to TiB 2 is an effective method to prepare small and uniform TiB 2 particles.

  3. Deposit of thin films of TiN, a-C, Ti/TiN/a-C by laser ablation

    International Nuclear Information System (INIS)

    Mejia, I.S.; Escobar A, L.; Camps, E.; Romero, S.; Muhl, S.

    2006-01-01

    Thin films of titanium nitride (TiN), amorphous carbon (a-C), as well as bilayers of Ti/TiN/a-C were deposited by means of the laser ablation technique. It was investigated the effect that it has the laser fluence used to ablation the targets in the structure and mechanical properties of the TiN deposited films. The TiN obtained films have a preferential orientation in the direction (200). The results show that the hardness of this material is influenced by the laser fluence. It is observed that the hardness is increased in an approximately lineal way with the increment of the fluence up to 19 J/cm 2 . The films of amorphous carbon present hardness of the order of 11.2 GPa. Likewise it was found that the multilayers of Ti/TiN/aC presented a bigger hardness that of its individual components. (Author)

  4. Microstructural evolution and wear behaviors of laser cladding Ti_2Ni/α(Ti) dual-phase coating reinforced by TiB and TiC

    International Nuclear Information System (INIS)

    Song, R.; Li, J.; Shao, J.Z.; Bai, L.L.; Chen, J.L.; Qu, C.C.

    2015-01-01

    Graphical abstract: - Highlights: • A TiC+TiB reinforced intermetallic matrix coating was fabricated by laser cladding. • The microstructural evolution of the reinforcements was analyzed. • A formula was established in term of wear loss, sliding time and applied load. • Wear behaviors were investigated by in situ continuing tests in different time intervals. • The transformation of wear mechanism at different applied loads was revealed. - Abstract: The Ti_2Ni/α(Ti) dual-phase coating reinforced by TiB and TiC was fabricated on the Ti6Al4V substrate by laser cladding. Phase constituents were confirmed by a theoretical prediction combined with X-ray diffraction (XRD) analyses. From the surface to the bottom of the coating, a regular evolution of the reinforcements’ microstructure, namely TiC_p+(TiB+TiC)_e, (TiB+TiC)_e and TiB_p+(TiB+TiC)_e (p and e were the abbreviations of primary and eutectic, respectively), was investigated by scanning electron microscopy (SEM). The coating possessed the higher microhardness than that of the substrate. An in situ dynamic method (in situ continuing tests at different time intervals) was designed to reveal wear behaviors at different wear stages. A quantitative calculation formula was established by a mathematic model to predict wear losses under different sliding time and applied loads in a definite precision. The wear mechanism was transformed from brittle debonding (at 10 N) to the joint action of brittle debonding and micro-cutting (at 20 N and 30 N) due to the microstructural evolution across the depth from the surface of the coating.

  5. Influence of electric current on microstructure evolution in Ti/Al and Ti/TiAl{sub 3} during spark plasma sintering

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Y. [Department of Materials Science and Engineering, Institute of Materials Science, University of Connecticut, Storrs, CT 06269-3136 (United States); Haley, J. [Department of Chemical Engineering and Materials Science, University of California, Davis, CA 95616-5294 (United States); Kulkarni, K. [Department of Materials Science and Engineering, Indian Institute of Technology, Kanpur 208016, UP (India); Aindow, M. [Department of Materials Science and Engineering, Institute of Materials Science, University of Connecticut, Storrs, CT 06269-3136 (United States); Lavernia, E.J., E-mail: lavernia@ucdavis.edu [Department of Chemical Engineering and Materials Science, University of California, Davis, CA 95616-5294 (United States); Department of Chemical Engineering and Materials Science, University of California, Irvine, CA 92697-2575 (United States)

    2015-11-05

    The synthesis of γ-TiAl from elemental metals via solid-state reactive diffusion processing routes involves multiple reaction steps with the formation of various intermediate intermetallic compounds, starting with TiAl{sub 3} because this phase is favored kinetically. To understand the processes by which the TiAl{sub 3} intermediate is eliminated during synthesis of γ-TiAl alloy via spark plasma sintering (SPS), the reaction between Ti and TiAl{sub 3} during SPS was studied with emphasis on the effects of the applied electric current and starting TiAl{sub 3} microstructure on the reaction kinetics and the underlying diffusion mechanisms. The intermediate intermetallic phases Ti{sub 3}Al, TiAl and TiAl{sub 2} were formed between the Ti and TiAl{sub 3} upon SPS processing at 900 °C. The applied electric current did not alter the character of the phases formation in the Ti/TiAl{sub 3} system, but thermodynamic calculations suggest that the activation energy for the nucleation of TiAl{sub 2} is reduced significantly with an electric current flowing. Moreover, the kinetics of the reactions between Ti and TiAl{sub 3} were enhanced when the starting TiAl{sub 3} microstructure was refined. The electric field also had a more significant influence on the grain growth kinetics for TiAl{sub 2} and TiAl in powder blend compacts with refined microstructures. - Highlights: • Reaction between Ti and TiAl{sub 3} during spark plasma sintering was studied. • Refined starting TiAl{sub 3} microstructure enhanced the reactions kinetics. • The nucleation barrier of TiAl{sub 2} was reduced by the applied electric field. • The applied electric field restrained the grain growth of TiAl and TiAl{sub 2}.

  6. “LUGAR” DE ESTUDO: NOTAS SOBRE AS VIVÊNCIAS NA FFP/UERJ E SUA INFLUÊNCIA NA PESQUISA EM GEOGRAFIA FÍSICA

    Directory of Open Access Journals (Sweden)

    Núbia Beray Armond

    2013-08-01

    Full Text Available Este texto foi desenvolvido a partir da indagação quanto ao “lugar de estudo quando da elaboração da monografia de conclusão de graduação em licenciatura em Geografia na UERJ/FFP, no ano de 2011, intitulada “A Geografia Física contemporânea no Brasil - em busca das gêneses das abordagens integradoras”. O conceito de “lugar” foi incorporado e compreendido como espaço de identidade e pertencimento, no qual o pesquisador é influenciado pela interlocução com outros cientistas que aprofundam e enriquecem o debate. Assim, a “caracterização da área de estudo” – capítulo exigido naquela etapa do trabalho - se apresentou como um desafio, posto que o “lugar” referido naquele momento se encontrava na dimensão subjetiva. Nesse sentido, as presentes notas buscam explicitar as influências de minha vivência geográfica enquanto estudante de graduação de Geografia da FFP/UERJ nas pesquisas realizadas sobre a Geografia Física e na construção de minha concepção de Geografia.

  7. Relación entre inteligencia emocional y notas de las áreas instrumentales en un grupo de tercero de primaria

    Directory of Open Access Journals (Sweden)

    Vicent Alfaro Mateu

    2016-01-01

    Full Text Available La finalidad de este trabajo es conocer si existe relación entre las áreas instrumentales, lengua y matemáticas, y la Inteligencia emocional de un grupo de alumnos de tercero de primaria de un centro concreto. Participaron 26 alumnos a los cuales se aplicó el instrumento test EQ-­‐i YV de BarOn adaptado para los alumnos. Las técnicas de análisis de correlación a través del SPSS permitirán comprobar si existe o no correlación entre la Inteligencia Emocional de los alumnos, los distintos aspectos de la misma y las áreas instrumentales. En los resultados encontrados no existe correlación entre matemáticas y lengua castellana y el total del cuestionario. La correlación entre las áreas instrumentales, lengua castellana y matemáticas es altamente significativa. Del mismo modo, el total de resultados del cuestionario “E” correlaciona positivamente con las partes del cuestionario “A”, “B”, “C” y “D”, remarcando que hay una alta correlación entre el factor intrapersonal (“B” y el factor de adaptabilidad (“D”. En conclusión, no existe una correlación directa entre las notas de los estudiantes y los resultados del test de inteligencia emocional.

  8. Notas e descrições em Hesperophanini, Eburiini, Piezocerini e Trachyderini (Coleoptera, Cerambycidae, Cerambycinae do Brasil e da Bolívia

    Directory of Open Access Journals (Sweden)

    Ubirajara R. Martins

    2010-01-01

    Full Text Available Novos táxons descritos - Hesperophanini: Paraliostola nigramacula sp. nov., do Brasil (Rondônia; Eburiini: Simplexeburia gen. nov., e sua espécie-tipo, S. divisa sp. nov. do Brasil (Amazonas; Piezocerini: Gorybia amazonensis sp. nov. and G. sulcata sp. nov., ambas do Brasil (Amazonas; Trachyderini: Galissus rubiventris sp. nov., da Bolívia (Santa Cruz. Notas e novos registros são apresentados para Liostola nitida Zajciw, 1962 e Ochrus chapadense Napp & Martins, 1982 (Hesperophanini; Uncieburia rogersi (Bates, 1870 e Quiacaua taguaiba Martins, 1970 (Eburiini.Notes and descriptions on Hesperophanini, Eburiini, Piezocerini and Trachyderini (Coleoptera, Cerambycidae, Cerambycinae from Brazil and Bolivia. New taxa described - Hesperophanini: Paraliostola nigramacula sp. nov. from Brazil (Rondônia; Eburiini: Simplexeburia gen. nov., and its type species, S. divisa sp. nov. from Brazil (Amazonas; Piezocerini: Gorybia amazonensis sp. nov. and G. sulcata sp. nov. both from Brazil (Amazonas; Trachyderini: Galissus rubiventris sp. nov. from Bolivia (Santa Cruz de la Sierra. Notes and records are presented for Liostola nitida Zajciw, 1962 and Ochrus chapadense Napp & Martins, 1982 (Hesperophanini; Uncieburia rogersi (Bates, 1870 and Quiacaua taguaiba Martins, 1997 (Eburiini.

  9. A notação escrita na resolução de problemas por crianças pré-escolares

    Directory of Open Access Journals (Sweden)

    Selva Ana Coêlho Vieira

    2000-01-01

    Full Text Available O estudo investigou como crianças de 4 a 6 anos resolvem problemas de subtração usando a notação escrita. Trinta crianças nas séries de Alfabetização, Jardim II e Jardim I foram solicitadas a resolverem quatro problemas (dois do tipo mudança e dois de comparação, envolvendo pares numéricos maiores e menores que dez. Os problemas foram inseridos em uma situação que buscou dar maior significado para o uso do registro no papel. Os protocolos das entrevistas com as crianças foram analisados a partir de dois eixos: a influência do registro no papel para o processo de resolução dos problemas e os tipos de registros produzidos. Observamos que o registro escrito foi utilizado para apoiar os cálculos realizados, possibilitar o acompanhamento do processo de raciocínio e favorecer o avanço no registro das operações matemáticas. Concluímos que resolver problemas no papel pode se constituir em uma alternativa interessante para a educação infantil.

  10. A notação escrita na resolução de problemas por crianças pré-escolares

    Directory of Open Access Journals (Sweden)

    Ana Coêlho Vieira Selva

    Full Text Available O estudo investigou como crianças de 4 a 6 anos resolvem problemas de subtração usando a notação escrita. Trinta crianças nas séries de Alfabetização, Jardim II e Jardim I foram solicitadas a resolverem quatro problemas (dois do tipo mudança e dois de comparação, envolvendo pares numéricos maiores e menores que dez. Os problemas foram inseridos em uma situação que buscou dar maior significado para o uso do registro no papel. Os protocolos das entrevistas com as crianças foram analisados a partir de dois eixos: a influência do registro no papel para o processo de resolução dos problemas e os tipos de registros produzidos. Observamos que o registro escrito foi utilizado para apoiar os cálculos realizados, possibilitar o acompanhamento do processo de raciocínio e favorecer o avanço no registro das operações matemáticas. Concluímos que resolver problemas no papel pode se constituir em uma alternativa interessante para a educação infantil.

  11. Exploring Alternative Radiolabeling Strategies for Sialic Acid-Binding Immunoglobulin-Like Lectin 9 Peptide: [68Ga]Ga- and [18F]AlF-NOTA-Siglec-9

    Directory of Open Access Journals (Sweden)

    Olli Moisio

    2018-01-01

    Full Text Available Amino acid residues 283–297 from sialic acid-binding immunoglobulin-like lectin 9 (Siglec-9 form a cyclic peptide ligand targeting vascular adhesion protein-1 (VAP-1. VAP-1 is associated with the transfer of leukocytes from blood to tissues upon inflammation. Therefore, analogs of Siglec-9 peptide are good candidates for visualizing inflammation non-invasively using positron emission tomography (PET. Gallium-68-labeled 1,4,7,10-tetraazacyclododecane-N,N′,N″,N‴-tetraacetic acid (DOTA-conjugated Siglec-9 has been evaluated extensively for this purpose. Here, we explored two alternative strategies for radiolabeling Siglec-9 peptide using a 1,4,7-triazacyclononane-triacetic acid (NOTA-chelator to bind [68Ga]Ga or [18F]AlF. The radioligands were evaluated by in vivo PET imaging and ex vivo γ-counting of turpentine-induced sterile skin/muscle inflammation in Sprague-Dawley rats. Both tracers showed clear accumulation in the inflamed tissues. The whole-body biodistribution patterns of the tracers were similar.

  12. Ti-84 Plus graphing calculator for dummies

    CERN Document Server

    McCalla

    2013-01-01

    Get up-to-speed on the functionality of your TI-84 Plus calculator Completely revised to cover the latest updates to the TI-84 Plus calculators, this bestselling guide will help you become the most savvy TI-84 Plus user in the classroom! Exploring the standard device, the updated device with USB plug and upgraded memory (the TI-84 Plus Silver Edition), and the upcoming color screen device, this book provides you with clear, understandable coverage of the TI-84's updated operating system. Details the new apps that are available for download to the calculator via the USB cabl

  13. Absolute isotopic abundances of Ti in meteorites

    International Nuclear Information System (INIS)

    Niederer, F.R.; Papanastassiou, D.A.; Wasserburg, G.J.

    1985-01-01

    The absolute isotope abundance of Ti has been determined in Ca-Al-rich inclusions from the Allende and Leoville meteorites and in samples of whole meteorites. The absolute Ti isotope abundances differ by a significant mass dependent isotope fractionation transformation from the previously reported abundances, which were normalized for fractionation using 46 Ti/ 48 Ti. Therefore, the absolute compositions define distinct nucleosynthetic components from those previously identified or reflect the existence of significant mass dependent isotope fractionation in nature. We provide a general formalism for determining the possible isotope compositions of the exotic Ti from the measured composition, for different values of isotope fractionation in nature and for different mixing ratios of the exotic and normal components. The absolute Ti and Ca isotopic compositions still support the correlation of 50 Ti and 48 Ca effects in the FUN inclusions and imply contributions from neutron-rich equilibrium or quasi-equilibrium nucleosynthesis. The present identification of endemic effects at 46 Ti, for the absolute composition, implies a shortfall of an explosive-oxygen component or reflects significant isotope fractionation. Additional nucleosynthetic components are required by 47 Ti and 49 Ti effects. Components are also defined in which 48 Ti is enhanced. Results are given and discussed. (author)

  14. AlTiN layer effect on mechanical properties of Ti-doped diamond-like carbon composite coatings

    International Nuclear Information System (INIS)

    Pang Xiaolu; Yang Huisheng; Gao Kewei; Wang Yanbin; Volinsky, Alex A.

    2011-01-01

    Ti/Ti-doped diamond-like carbon (DLC) and Ti/AlTiN/Ti-DLC composite coatings were deposited by magnetron sputtering on W18Cr4V high speed steel substrates. The effect of the AlTiN support layer on the properties of these composite coatings was investigated through microstructure and mechanical properties characterization, including hardness, elastic modulus, coefficient of friction and wear properties measured by scanning electron microscopy, Raman spectroscopy, scratch and ball-on-disk friction tests. Ti and AlTiN interlayers have a columnar structure with 50-80 nm grains. The hardness and elastic modulus of Ti/Ti-DLC and Ti/AlTiN/Ti-DLC coatings is 25.9 ± 0.4, 222.2 ± 6.3 GPa and 19.3 ± 1, 205.6 ± 6.7 GPa, respectively. Adhesion of Ti-DLC, Ti/AlTiN/Ti-DLC and AlTiN/Ti-DLC coatings expressed as the critical lateral force is 26.5 N, 38.2 N, and 47.8 N, respectively. Substrate coefficient of friction without coatings is 0.44, and it is 0.1 for Ti/Ti-DLC and Ti/AlTiN/Ti-DLC coatings. Wear resistance of Ti/AlTiN/Ti-DLC composite coatings is much higher than Ti/Ti-DLC coatings based on the wear track width of 169.8 and 73.2 μm, respectively, for the same experimental conditions.

  15. Considerações gerais sôbre a vegetação do Estado de Goiás: notas preliminares sôbre a fitosociologia do Planalto Central do Brasileiro Preliminary observations on the vegetation of Goiás

    Directory of Open Access Journals (Sweden)

    Henrique P. Veloso

    1948-03-01

    Full Text Available Em junho de 1947, fomos convidados pelo general DEJALMA POLY COELHO, chefe da Comissão de Estudos do Planalto Central Brasileiro, para colaborarmos com o Grupo de Geógrafos chefiado pelo Prof. FRANCIS RUELLAN, a quem foi confiada parte dos trabalhos para a localização de novo Distrito Federal da República. A Diretoria do Instituto Oswaldo Cruz, nos incumbiu então de estudar as condições fito-ecológicas de trechos do Estado de Goiás, paralelamente às observações bio-geográficas que teríamos de realizar para a Comissão. Desde 1945 que vimos observando, em viagens, a vegetação do tipo Cerrado, nos Estados de São Paulo, Minas Gerais e Mato Grosso, Outrossim, em notas já publicadas sôbre a vegetação dos Estados de Mato Grosso e Minas Gerais, tivemos a oportunidade de apreciar, ligeiramente, a importãncia do Cerrado como uma climática e o papel que o mesmo desempenha na configuração bio-geográfica do brasil. Queremos salientar, mais uma vez, a grande necessidade que temos de estudar determinados pontos de outras regiões, para podermos apresentar um trabalho ecológico sôbre o Cerrado brasileiro que, apesar de muito bem conhecido sob o ponto de vista da Sistemática, é quase desconhecido quanto ao papel das espécies dentro das associações e sias reações aos habitats. Com os dados ecológicos que possuíamos e com os estudos que realizamos no Estado de Goiás, sòmente nos falta obter uma visão mais ampla das formações e fazer alguns levantamentos sociológicos nas associações do Cerrado dos Estados de São Paulo, Minas Gerais e Baía para completarmos assim, a nossa monografia sôbre a vegetação do Centro Oeste do Brasil. Na apresentação desta nota não poderiamos deixar de agradecer ao Prof. ALFREDO PORTO DOMINGUES e aos componentes do Grupo pos, recebemos contribuição valiosa de todos, que muito fizeram para o bom andamento dos trabalhos de campo. Expressamos também nossos agradecimentos a quantos

  16. Model Penilaian Kapabilitas Proses Optimasi Resiko Ti Berdasarkan Cobit 5

    OpenAIRE

    Putri, Rahmi Eka

    2015-01-01

    Teknologi informasi (TI) saat ini telah menjadi kebutuhan yang mendasar bagi setiap organisasi dan tidak jarang sebuah organisasi memiliki ketergantungan yang tinggi terhadap TI. Resiko penggunaan TI di organisasi harus dikelola dengan baik, agar resiko penggunaan TI dapat diminimalisasi dan TI dapat membantu dalam pencapaian tujuan organisasi. Optimasi resiko penggunaan TI di organisasi merupakan salah satu domain dalam tata kelola TI berdasarkan COBIT 5. Proses ini bertujuan untuk memastika...

  17. Layered Composite of TiC-TiB2 to Ti-6Al-4V in Graded Composition by Combustion Synthesis in High-gravity Field

    International Nuclear Information System (INIS)

    Huang Xuegang; Zhao Zhongmin; Zhang Long

    2013-01-01

    By taking combustion synthesis to prepare solidified TiB 2 matrix ceramic in high-gravity field, the layered composite of TiC-TiB 2 ceramic to Ti-6Al-4V substrate in graded composition was achieved. XRD, FESEM and EDS results showed that the bulk full-density solidified TiC-TiB 2 composite was composed of fine TiB 2 platelets, TiC irregular grains, a few of α-Al 2 O 3 inclusions and Cr alloy phases, and α'-Ti phases alternating with Ti-enriched carbides constituted the matrix of the joint in which fine TiB platelets were embedded, whereas some C, B atoms were also detected at the heat-affected zone of Ti-6A1-4V substrate. The layered composite of the solidified ceramic to Ti-6Al-4V substrate in graded composition with continuous microstructure was considered a result of fused joint and inter-diffusion between liquid ceramic and surface-molten Ti alloy, followed by TiB 2 -Ti peritectic reaction and subsequent eutectic reaction in TiC-TiB-Ti ternary system.

  18. Contabilidade pública: a evidenciação em notas explicativas das informações contábeis provenientes do reconhecimento dos bens de uso comum nos municípios da região metropolitana de São Paulo

    OpenAIRE

    Seraphim, Paulo Rogerio

    2011-01-01

    A Contabilidade Pública Brasileira está a caminho da convergência as Normas Internacionais de Contabilidade. Este trabalho abordou o estudo da evidenciação das informações contábeis oriundas do reconhecimento dos bens de uso comum como pontes, ruas, estradas, viadutos e praças pela Administração Pública através das notas explicativas. O objetivo geral foi validar uma proposta de estrutura de nota explicativa que promova a evidenciação das informações contábeis a seus usuários, em apoio ao pro...

  19. Structural and Mechanical Properties of TiN-TiC-TiO System: First Principle Study

    Science.gov (United States)

    Farhadizadeh, Ali Reza; Amadeh, Ahmad Ali; Ghomi, Hamidreza

    2017-11-01

    Mechanical and structural properties of ternary system of TiN-TiO-TiC are investigated using first principle methods. 70 different compositions of Ti 100 (NOC) 100 with cubic structure are examined in order to illustrate the trend of properties variations. The geometry of compounds is optimized, and then, their chemical stability is assessed. Afterward, shear, bulk and young moduli, Cauchy pressure, Zener ratio, hardness and {H}3/{E}2 ratio are computed based on elastic constants. Graphical ternary diagram is used to represent the trend of such properties when the content of nitrogen, oxygen and carbon varies. The results show that incorporation of oxygen into the system decreases the hardness and {H}3/{E}2 ratio while subsequently ductility increases due to positive Cauchy pressure. It is revealed that the maximum {H}3/{E}2 ratio occurs when both nitrogen and carbon with a little amount of oxygen are incorporated. Ti 100 N 30 C 70 owns the highest hardness and {H}3/{E}2 ratio equal to 39.5 and 0.2 GPa, respectively. In addition, the G/B of this compound, which is about 0.9, shows it is brittle. It is also observed that the solid solutions have better mechanical properties with respect to titanium nitride and titanium carbide. The obtained results could be used to enhance monolayer coatings as well as to design multilayers with specific mechanical properties. The authors would like to acknowledge the financial support of University of Tehran Science and Technology Park for this research under Grant No. 94061

  20. Determinação de cobre, ferro, manganês e zinco, num mesmo extrato de planta, por potometria de chama de absorção The determination of copper, iron, manganese and zinc in a bulk plant extract by atomic absorption spectrophotometry

    Directory of Open Access Journals (Sweden)

    J. Romano Gallo

    1971-05-01

    Full Text Available É apresentado um método de determinação, num mesmo extrato de planta, de ferro, manganês e zinco na fase aquosa, e de cobre, após sua extração em solvente orgânico. Para êsse estudo usou-se um analisador automático de absorção atômica Perkin-Elmer, modêlo 4A. Somente á silica, em certas concentrações, poderá constituir problema na determinação de manganês ou ferro, na ausência de cálcio. Na extração quantitativa do cobre é necessário conservar o pH abaixo de 2, para evitar interferência de ferro.A method was developed to determine quantitatively Cu, Fe, Mn and Zn in a bulk plant extract, using flame absorption photometry. The process measures Fe, Mn and Zn directly in the aqueous solution, but a concentration of the extract with organic solvents is required for copper determination. Essentially the process consists in obtaining the plant extract through digestion of 1.000 g of the ground dry samples, with HNO3 and later with HC10(4-H2S0(4 (7:1 v/v, then the solution is diluted to 50 ml with water. Thirty ml of this solution are transferred to a separatory funnel, where the copper is extracted by the ammonium pyrrolidine dithiocarbamate/ methyl isobutyl ketone system, and its amount determined. It is necessary to keep the pH below 2 to avoid interference of Fe on Cu determination. Mn, Fe and Zn are determined directly in the remaining 20 ml of plant extract. It has been noticed that silicon might cause some problems in the determination of Fe and Mn, in the absence of Ca. All the determinations were made in a Perkin-Elmer mod. 4A atomic absorption automatic analyser.

  1. Seguridad ciudadana al nivel local: notas de trabajo de campo sobre la ejecución y percepción del ‘Plan Cuadrante’ en Cali (Colombia

    Directory of Open Access Journals (Sweden)

    Myriam Janneth Román Muñoz

    2013-06-01

    Full Text Available Este artículo recoge las notas de trabajo de campo sobre las acciones que la Policía Metropolitana de Cali realiza en el marco del ‘Plan Cuadrante’ y la percepción ciudadana ante dicha intervención. A partir del ejercicio etnográfico, interesa analizar las acciones que implicanconocer actores y actividades delictivas y violentas. La investigación se desarrolló en cuatro barrios de la ciudad: El Cortijo, Mariano Ramos, Terrón Colorado y Villa del Lago.

  2. Notas, novos registros e novas espécies da coleção de Cerambycidae (Coleoptera do Instituto Nacional de Pesquisas da Amazônia, Manaus

    Directory of Open Access Journals (Sweden)

    Maria Helena M. Galileo

    2011-09-01

    Full Text Available Espécies novas descritas da Amazônia brasileira em Ibidionini: Compsibidion uniforme sp. nov. (Amazonas; Heterachthes rafaeli sp. nov. (Amazonas; em Apomecynini: Amphicnaeia lineolata sp. nov. (Pará; em Desmiphorini: Cotycicuiara magnifica sp. nov. (Amazonas. Novos registros e notas são apresentados para: Gnomidolon insulicola Bates, 1885 e G. lansbergei (Thomson, 1867 (Hexoplonini; Desmiphora (D. uniformis Galileo & Martins, 2003 (Desmiphorini; Omosarotes paradoxum (Tippmann, 1955 (Cyrtinini e Ozotroctes ogeri Tavakilian & Néouze, 2007 (Acanthoderini.

  3. Planificación urbana y espirovías en la Perla del Pacífico: algunas notas sobre Valparaíso en el decenio 1930. /

    Directory of Open Access Journals (Sweden)

    Pavez R., María Isabel

    2005-11-01

    Full Text Available Se aporta algunas notas para la historiografía en Urbanismo, Planificación y Diseño Urbano en Chile y en Valparaíso en los años 1930, dando cuenta de la capacidad reflexiva y creativa de los profesionales precursores./"City Planning and "espirovías" in the "Pearl of the Pacific" (Valparaiso: several notes on Valparaiso from the 1930's". The article features several notes on the history of City Planning and Urban Design in Chile and Valparaiso in the 1930's thus giving insights about the creative and reflexive qualities of the forefathers of Urban professionals.

  4. Cortar flores en primera persona. Notas sobre el trabajo de campo para el estudio del trabajo infantil en la floricultura de exportación en México

    Directory of Open Access Journals (Sweden)

    Sarai Miranda Juárez

    2016-01-01

    Full Text Available La presente nota corresponde a la descripción del abordaje metodológico de corte cualitativo para responder a una investigación doctoral sobre trabajo infantil en la floricultura de exportación en México. Se presentan las principales estrategias emprendidas durante el trabajo de campo así como las problemáticas enfrentadas al abordar la situación de un grupo social en situación de vulnerabilidad.

  5. De la apropiación terrateniente a la expansión del capital: notas desde una visión histórica sobre la concentración y los conflictos por la tierra

    OpenAIRE

    Martínez Dougnac, Gabriela

    2014-01-01

    Se abordan algunas notas y reflexiones que resultan de una investigación en curso acerca de los procesos de concentración de la tierra agrícola en nuestro país. El tema se aborda desde una perspectiva histórica, intentando explicar el actual acaparamiento y el despojo a los productores directos y a la sociedad que de éste resulta, atendiendo tanto a las tendencias de larga duración propias del desarrollo del capitalismo en al agro y a sus condiciones presentes, como a las formas act...

  6. Study and characterization of the irreversible transformation of electrically stressed planar Ti/TiO{sub x}/Ti junctions

    Energy Technology Data Exchange (ETDEWEB)

    Guillaume, N.; Puyoo, E., E-mail: etienne.puyoo@insa-lyon.fr; Le Berre, M.; Albertini, D.; Baboux, N.; Chevalier, C.; Ayadi, K.; Grégoire, J.; Gautier, B.; Calmon, F. [Institut des Nanotechnologies de Lyon, Université de Lyon, INL UMR 5270, CNRS, INSA de Lyon, Villeurbanne F-69621 (France)

    2015-10-14

    We investigate the properties and characteristics of planar Ti/TiO{sub x}/Ti junctions, which consist of transverse TiO{sub x} lines drawn on Ti test patterns. Junctions are elaborated by means of local anodic oxidation using atomic force microscopy. An irreversible morphological transformation occurring in a reproducible manner is observed when these planar junctions are electrically stressed under ambient atmosphere. Structural and chemical analyses based on transmission electron microscopy techniques reveal the extension of the initial amorphous TiO{sub x} into a crystalline rutile phase. This irreversible transformation is proven to vanish completely if the electrical stress occurs under vacuum atmosphere. Finally, we carry out temperature dependent electrical measurements in order to elucidate their conduction mechanism: Schottky emission above an ultra-low potential barrier is assumed to dominate under vacuum atmosphere whereas ionic conduction seems to prevail in air.

  7. Stability of tritium permeation prevention barrier with TiC and TiN + TiC coating

    International Nuclear Information System (INIS)

    Shan Changqi; Chen Qingwang; Dai Shaoxia; Jiang Weisheng

    1999-01-01

    The stability of tritium permeation prevention barrier of 316L stainless steel with coating TiC and TiN + TiC under the conditions of very large thermal gradient, thermal cycling and plasma irradiation is researched. The research includes two aspects: one is the study on the stability resisting H + plasma irradiation; another is on the ability of two coating materials when they are used in long term under the condition of very large thermal gradient and cycling. The results show that TiC and TiN + TiC composite coating materials, after chemical heat treatment and forming tritium permeation prevention barrier, can resist H + ion irradiation, and also can resist very large thermal gradient and thermal cycling. The long time experiments show that tritium permeation prevention barrier of those coating materials is stable when they are used in long term

  8. Low modulus and bioactive Ti/α-TCP/Ti-mesh composite prepared by spark plasma sintering.

    Science.gov (United States)

    Guo, Yu; Tan, Yanni; Liu, Yong; Liu, Shifeng; Zhou, Rui; Tang, Hanchun

    2017-11-01

    A titanium mesh scaffold composite filled with Ti/α-TCP particles was prepared by spark plasma sintering (SPS). The microstructures and interfacial reactions of the composites were investigated by scanning electron microscopy (SEM), Energy Dispersive Spectroscopy (EDS) and X-ray diffraction (XRD) analyses. The compressive strength and elastic modulus were also measured. In vitro bioactivity and biocompatibility was evaluated by using simulated body fluid and cells culture, respectively. After high temperature sintering, Ti oxides, Ti x P y and CaTiO 3 were formed. The formation of Ti oxides and Ti x P y were resulted from the diffusion of O and P elements from α-TCP to Ti. CaTiO 3 was the reaction product of Ti and α-TCP. The composite of 70Ti/α-TCP incorporated with Ti mesh showed a high compressive strength of 589MPa and a low compressive modulus of 30GPa. The bioactivity test showed the formation of a thick apatite layer on the composite and well-spread cells attachment. A good combination of mechanical properties and bioactivity indicated a high potential application of Ti/α-TCP/Ti-mesh composite for orthopedic implants. Copyright © 2017. Published by Elsevier B.V.

  9. Early marginal ulcer following Roux-en-Y gastric bypass under proton pump inhibitor treatment: prospective multicentric study Úlcera perianastomótica após derivação gástrica em Y-de-Roux mesmo em uso de inibidor de bomba de prótons: estudo prospectivo multicêntrico

    Directory of Open Access Journals (Sweden)

    Arthur Belarmino Garrido Jr.

    2010-06-01

    ção ácida, capaz de diminuir sintomas pépticos e evitar lesões mucosas, mesmo em pacientes usuários de antiinflamatórios não-esteróides. OBJETIVOS: Estudo prospectivo não-randomizado procura avaliar a ocorrência de dispepsia e úlceras perianastomóticas nos 2 primeiros meses após derivação gástrica em Y-de-Roux. MÉTODOS: Cento e dezoito obesos mórbidos foram operados em quatro centros de cirurgia bariátrica pela técnica de derivação gástrica em Y-de-Roux por laparotomia ou laparoscopia. À endoscopia digestiva alta, H. pylori estava ausente. Todos os operados tomaram 20 mg de esomeprazol por dia do 3º ao 60º pós-operatório. RESULTADOS: Entre o 10º e o 15º dia, nenhum paciente referiu epigastralgia ou pirose, um referiu vômitos moderados, quatro dor abdominal e oito náuseas. Entre o 55º e o 65º dia, três referiram epigastralgia leve, seis vômitos, um dor abdominal, dois náuseas e seis pirose. O exame endoscópico neste período revelou esofagite em 10 pacientes (8,5%, hérnia hiatal em 2 (1,7% e corpo estranho nas linhas de sutura em 12 (10,2%. Em nove pacientes (7,6% encontrou-se úlcera de boca anastomótica ou adjacente a ela, em dois incluindo granuloma de fio de sutura ou de grampo metálico. Dez pacientes utilizaram alguma vez antiinflamatórios não-esteróides nos 2 meses de estudo, nenhum deles apresentando úlcera. CONCLUSÕES: A ocorrência de úlcera de boca anastomótica 2 meses após derivação gástrica em Y-de-Roux, é considerável, mesmo em uso de esomeprazol. Não houve relação com ingestão de antiinflamatórios não-esteróides, o que realça as possibilidades dos fatores isquemia e corpo estranho na gênese das lesões.

  10. Microstructure and kinetics of a functionally graded NiTi-TiC x composite produced by combustion synthesis

    International Nuclear Information System (INIS)

    Burkes, Douglas E.; Moore, John J.

    2007-01-01

    Production of a NiTi-TiC x functionally graded material (FGM) composite is possible through use of a combustion synthesis (CS) reaction employing the propagating mode (SHS). The NiTi-TiC x FGM combines the well-known and understood superelastic and shape memory capabilities of NiTi with the high hardness, wear and corrosion resistance of TiC x . The material layers were observed as functionally graded both in composition and porosity with distinct interfaces, while still maintaining good material interaction and bonding. XRD of the FGM composite revealed the presence of TiC x with equi-atomic NiTi and minor NiTi 2 and NiTi 3 phases. The TiC x particle size decreased with increasing NiTi content. Microindentation performed across the length of the FGM revealed a decrease in hardness as the NiTi content increased

  11. Fabrication and Mechanical Properties of Nanostructured TiC-TiAl by the Pulsed Current Activated Sintering

    Energy Technology Data Exchange (ETDEWEB)

    Kwak, Bong-Won; Shon, In-Jin [Chonbuk National University, Chonbuk (Korea, Republic of); Kim, Byung-Su [Korea Institute of Geoscience and Mineral Resources, Daejeon (Korea, Republic of); Yoon, Jin-Kook; Hong, Kyung-Tae [Korea Institute of Science and Technology, Seoul (Korea, Republic of)

    2016-08-15

    TiC-Co or TiC-Ni hard materials have been used for cutting tools. However, the high cost and the low hardness of Ni or Co, and the low corrosion resistance of the TiC-Ni and TiC-Co cermets have generated interest in recent years in using them as alternative binder phases. In this study, TiAl was used as a novel binder and consolidated by the pulsed current activated sintering(PCAS) method. Nanopowders of TiC and TiAl were fabricated using high energy ball milling. Highly dense TiC-TiAl hard materials with a relative density of up to 99.5% were sintered within three min by PCAS. Not only the hardness but also the fracture toughness of the TiC-10 vol%TiAl were better than those of TiC-10 vol%Ni or TiC-10 vol%Co.

  12. Fabrication and Mechanical Properties of Nanostructured TiC-TiAl by the Pulsed Current Activated Sintering

    International Nuclear Information System (INIS)

    Kwak, Bong-Won; Shon, In-Jin; Kim, Byung-Su; Yoon, Jin-Kook; Hong, Kyung-Tae

    2016-01-01

    TiC-Co or TiC-Ni hard materials have been used for cutting tools. However, the high cost and the low hardness of Ni or Co, and the low corrosion resistance of the TiC-Ni and TiC-Co cermets have generated interest in recent years in using them as alternative binder phases. In this study, TiAl was used as a novel binder and consolidated by the pulsed current activated sintering(PCAS) method. Nanopowders of TiC and TiAl were fabricated using high energy ball milling. Highly dense TiC-TiAl hard materials with a relative density of up to 99.5% were sintered within three min by PCAS. Not only the hardness but also the fracture toughness of the TiC-10 vol%TiAl were better than those of TiC-10 vol%Ni or TiC-10 vol%Co.

  13. XPS study on the electronic structure of hydrided Ti-V, Ti-Nb and Ti-Mo alloys

    International Nuclear Information System (INIS)

    Tanaka, Kazuhide; Aoki, Hiromasa

    1989-01-01

    Effects of hydrogenation on the core and valence electronic structures of β(bcc)-stabilized Ti-25at%V, Ti-50at%Nb and Ti-20at%Mo alloys are studied with XPS technique using monochromatized Al K α radiation. Small but uniform binding-energy shifts are observed upon hydrogenation for all the core spectra measured. Their valence-band spectra are significantly distorted, providing an evidence of the formation of metal-hydrogen bonding bands in these Ti alloys. Interrelations between the core binding-energy shifts and the valence-band distortion are discussed. (orig.)

  14. Electrochemical properties of Ti3+ doped Ag-Ti nanotube arrays coated with hydroxyapatite

    Science.gov (United States)

    Zhang, Hangzhou; Shi, Xiaoguo; Tian, Ang; Wang, Li; Liu, Chuangwei

    2018-04-01

    Ag-Ti nanotube array was prepared by simple anodic oxidation method and uniform hydroxyapatite were electrochemically deposited on the nanotubes, and then characterized by SEM, XRD, XPS and EIS. In order to investigate the influence of Ti3+ on the electrochemical deposition of hydroxyapatite on the nanotubes, the Ag-Ti nanotube array self-doped with Ti3+ was prepared by one step reduction method. The experiment results revealed that the Ti3+ can promote the grow rate of hydroxyapatite coatings on nanotube surface. The hydroxyapatite coated Ag-Ti nanotube arrays with Ti3+ exhibit excellent stability and higher corrosion resistance. Moreover, the compact and dense hydroxyapatite coating can also prevent the Ag atom erosion from the Ag-Ti nanotube.

  15. Effect of Ti solute on the recovery of cold-rolled V-Ti alloys

    International Nuclear Information System (INIS)

    Leguey, T.; Munoz, A.; Pareja, R.

    1999-01-01

    The recovery characteristics of cold-rolled pure V and V-Ti alloys with compositions of 0.3, 1 and 4.5 at.% Ti have been investigated by positron annihilation spectroscopy. The recovery is accomplished in two stages. Fifty percent cold rolling induces the formation of microvoids in V-0.3Ti and V-1Ti but not in V-4.5Ti. The first recovery stage in pure V, V-0.3Ti and V-1Ti starts with the dissolution of microvoids. The recovery curves of the annihilation parameters for the alloys indicate the formation of Ti-rich precipitates during the first recovery stage. These precipitates act as very efficient vacancy sinks. The second recovery stage starting for annealing temperatures above ≅1150 K is attributed to annealing of vacancies associated to the precipitates. (orig.)

  16. First NMR observation of 47Ti and 49Ti in cyclopentadienyl complexes

    International Nuclear Information System (INIS)

    Dormond, A.; Fauconet, M.; Leblanc, J.C.; Moise, C.

    1984-01-01

    47 Ti and 49 Ti NMR spectra of some mono and biscyclopentadienyl complexes are reported for the first time. The resonances span a relatively large range: electron donating substituents on the cyclopentadienyl ring cause an unexpected downfield shift. (author)

  17. Multilayer TiC/TiN diffusion barrier films for copper

    International Nuclear Information System (INIS)

    Yoganand, S.N.; Raghuveer, M.S.; Jagannadham, K.; Wu, L.; Karoui, A.; Rozgonyi, G.

    2002-01-01

    TiC/TiN thin films deposited by reactive magnetron sputtering on Si (100) substrates were investigated by transmission electron microscopy for microstructure and by deep level transient spectroscopy (DLTS) for diffusion barrier against copper. TiN thin films deposited on Si substrates at a substrate temperature of 600 deg. C were textured, and TiC thin films deposited at the same temperature were polycrystalline. TiC/TiN multilayer films also showed the same characteristics with the formation of an additional interaction layer. The diffusion barrier characteristics of the TiC/TiN/Si were determined by DLTS and the results showed that the films completely prevented diffusion of copper into Si

  18. Grotrian diagrams for highly ionized titanium Ti V-Ti XXII

    International Nuclear Information System (INIS)

    Mori, Kazuo

    1982-06-01

    Grotrian diagrams of Ti V-Ti XXII have been prepared. Data of wavelengths, energy levels, oscillator strengths and transition probabilities are updated for diagnostics of high temperature plasmas, and tabulated with references. (author)

  19. First-Principles Study of the Polar TiC/Ti Interface

    Institute of Scientific and Technical Information of China (English)

    Limin LIU; Shaoqing WANG; Hengqiang YE

    2003-01-01

    The interface structure, work of adhesion, and bonding character of the polar TiC/Ti interface have been examined by the first-principles density functional plane-wave pseudopotential calculations. Both Ti- and C-terminated interfaces including six different interface structures were calculated, which present quite different features. For the Ti-terminated interface, the interfacial Ti-Ti bond has a strong metallic and weak covalent character; while for the C-terminated interface, the interfacial bond is a strong polar covalent interaction between the Ti-3d and C-2p orbital.The work of adhesion of C-terminated interface is nearly 9 J/m2 stronger than that of the Ti-terminated. It is found that each termination has relatively large work of adhesion, which is consistent with other polar interfaces.

  20. Proton irradiation studies on pure Ti and Ti-6Al-4V

    Energy Technology Data Exchange (ETDEWEB)

    Dutta Gupta, A. [Variable Energy Cyclotron Centre, HBNI, 1/AF Bidhannagar, Kolkata (India); Mukherjee, P., E-mail: paramita@vecc.gov.in [Variable Energy Cyclotron Centre, HBNI, 1/AF Bidhannagar, Kolkata (India); Gayathri, N.; Bhattacharyya, P.; Bhattacharya, M. [Variable Energy Cyclotron Centre, HBNI, 1/AF Bidhannagar, Kolkata (India); Sarkar, Apu [Materials Group, Bhabha Atomic Research Centre, Mumbai (India); Sen, S. [Mechanical Engineering, Jadavpur University, Kolkata (India); Mitra, M.K. [Metallurgical and Materials Engineering, Jadavpur University, Kolkata (India)

    2016-11-15

    Post irradiated microstructural characterisation of pure Ti and Ti-6Al-4V has been done as a function of dose using different model based techniques of X-ray diffraction line profile analysis. There is a systematic change of domain size for both the materials with dose but the microstrain within the domain remains almost unaltered. The domain size appears to be lower for pure Ti at all doses as compared to Ti-6Al-4V alloy. XRD peaks became highly asymmetric particularly at a dose of 5 × 10{sup 21} p/m{sup 2} for Ti-6Al-4V samples which is not observed for pure Ti at the same dose. This may be attributed to the segregation of alloying elements as a result of irradiation. Microhardness values increases with dose for pure Ti and then saturates at higher doses whereas microhardness values are found to decrease at higher doses for Ti-6Al-4V.

  1. Tailoring ultrafine grained and dispersion-strengthened Ti2AlC/TiAl ...

    Indian Academy of Sciences (India)

    and Ti-Al pre-alloyed powders at low temperature of 1150◦C. The composite mainly consisted ... Metal–matrix composites; mechanical properties; microstructures; sintering. 1. Introduction γ-TiAl-based intermetallic alloys have been extensively.

  2. PHASE CONSTITUENTS AND MICROSTRUCTURE OF Ti3Al/Fe3Al + TiN/TiB2 COMPOSITE COATING ON TITANIUM ALLOY

    OpenAIRE

    JIANING LI; CHUANZHONG CHEN; CUIFANG ZHANG

    2011-01-01

    Laser cladding of the Fe3Al + B4C/TiN + Al2O3 pre-placed powders on the Ti-6Al-4V alloy can form the Ti3Al/Fe3Al + TiN/TiB2 composite coating, which improved the wear resistance of the Ti-6Al-4V alloy surface. In this study, the Ti3Al/Fe3Al + TiN/TiB2 composite coating has been researched by means of X-ray diffraction and scanning electron microscope. It was found that during the laser cladding process, Al2O3 can react with TiB2, leading to the formations of Ti3Al and B. This principle can be...

  3. Positron emission tomography imaging of CD105 expression in a rat myocardial infarction model with (64)Cu-NOTA-TRC105.

    Science.gov (United States)

    Orbay, Hakan; Zhang, Yin; Valdovinos, Hector F; Song, Guoqing; Hernandez, Reinier; Theuer, Charles P; Hacker, Timothy A; Nickles, Robert J; Cai, Weibo

    2013-01-01

    Biological changes following myocardial infarction (MI) lead to increased secretion of angiogenic factors that subsequently stimulate the formation of new blood vessels as a compensatory mechanism to reverse ischemia. The goal of this study was to assess the role of CD105 expression during MI-induced angiogenesis by positron emission tomography (PET) imaging using (64)Cu-labeled TRC105, an anti-CD105 monoclonal antibody. MI was induced by ligation of the left anterior descending (LAD) artery in female rats. Echocardiography and (18)F-fluoro-2-deoxy-D-glucose ((18)F-FDG) PET scans were performed on post-operative day 3 to confirm the presence of MI in the infarct group and intact heart in the sham group, respectively. Ischemia-induced angiogenesis was non-invasively monitored with (64)Cu-NOTA-TRC105 (an extensively validated PET tracer in our previous studies) PET on post-operative days 3, 10, and 17. Tracer uptake in the infarct zone was highest on day 3 following MI, which was significantly higher than that in the sham group (1.41 ± 0.45 %ID/g vs 0.57 ± 0.07 %ID/g; n=3, p<0.05). Subsequently, tracer uptake in the infarct zone decreased over time to the background level on day 17, whereas tracer uptake in the heart of sham rats remained low at all time points examined. Histopathology documented increased CD105 expression following MI, which corroborated in vivo findings. This study indicated that PET imaging of CD105 can be a useful tool for MI-related research, which can potentially improve MI patient management in the future upon clinical translation of the optimized PET tracers.

  4. Notas, novos registros e novas espécies de Ibidionini (Coleoptera, Cerambycidae Notes, new records and new species of Ibidionini (Coleoptera, Cerambycidae

    Directory of Open Access Journals (Sweden)

    Ubirajara R. Martins

    2012-06-01

    Full Text Available Novas espécies descritas do Brasil: Tropidion terminatum sp. nov. e Tropidion una sp. nov. (Rondônia; Tropidion buriti sp. nov. (Piauí; Compsibidion manauara sp. nov. (Manaus, Compsibidion elianae sp. nov. (Goiás; Compsibidion novalimae sp. nov. e Compsibidion peti sp. nov. (Minas Gerais. Do Brasil (Mato Grosso e da Bolívia (Santa Cruz, Compsibidion ybyra sp. nov.; da Venezuela (Guarico, Tropidion jolyi sp. nov.; da Bolívia (Santa Cruz, Dodecaibidion bolivianum sp. nov. e Pygmodeon maculatum sp. nov. Minibidion captiosus nom. nov. é proposto para Minibidion bicolor Martins, Galileo & Limeira-de Oliveira, 2011. São estabelecidos novo status para Compsibidion rubricolle Melzer, 1935, e notas sobre Heterachthes tysiphonis (Thomson, 1867. São apresentados novos registros para Tropidion zonapterum (Martins, 1962, Compsibidion campestre (Gounelle, 1908 e Kolonibidion femoratum (Martins, 1971.New species are described from Brazil: Tropidion terminatum sp. nov. and Tropidion una sp. nov. (Rondônia; Tropidion buriti sp. nov. (Piauí; Compsibidion manauara, sp. nov. (Amazonas; Compsibidion elianae sp. nov. (Goiás; Compsibidion novalimae sp. nov. and Compsibidion peti sp. nov. (Minas Gerais; from Brazil (Mato Grosso and Bolivia (Santa Cruz, Compsibidion ybyra sp. nov.; from Venezuela (Guarico, Tropidion jolyi sp. nov.; from Bolivia (Santa Cruz, Dodecaibidion bolivianum sp. nov. and Pygmodeon maculatum sp. nov. Minibidion captiosus nom. nov. to Minibidion bicolor Martins, Galileo & Limeira-de Oliveira, 2011 is proposed. New status is presented for Compsibidion rubricolle Melzer, 1935 and notes on Heterachthes tysiphonis (Thomson, 1867 are presented. New records are presented for Tropidion zonapterum (Martins, 1962, Compsibidion campestre (Gounelle, 1908 and Kolonibidion femoratum (Martins, 1971.

  5. Fretting wear behaviour of TiC/Ti(C,N)/TiN multi-layer coatings at elevated temperature in gross slip regime

    International Nuclear Information System (INIS)

    Liu Hanwei; Huang Kunpeng; Zhu Minhao; Zhou Zhongrong

    2005-01-01

    Tic/Ti(C,N)/TiN multi-layer coatings are prepared on the 1Cr13 stainless steel substrate by the technique of Chemical Vapour Deposition, and the fretting wear behaviour of 1Cr13 stainless steel and TiC/Ti(C,N)/TiN coatings are investigated and studied controversially from 25 degree C to 400 degree C in the gross slip regime. It shows that the temperature has great influence on the fretting wear in the gross slip regime for the 1Cr13 stainless steel but little for Ti/C/Ti(C,N)/TiN multi-layer coatings. With the temperature increasing, the friction coefficient and the wear volume of the 1Cr13 alloy decreases and the wear volume of TiC/Ti(C, N)/TiN multi-layer coatings is invariant. TiC/Ti(C,N)/TiN multi-layer coatings have better wear-resistant capability than the 1Cr13 stainless steel, but the wear volume of the substrate increases greatly because of the grain-abrasion resulted from hard debris when TiC/Ti(C,N)/TiN multi-layer coatings are ground off. (authors)

  6. Micromechanisms of fracture and fatigue in Ti3Al based and TiAl based intermetallics

    International Nuclear Information System (INIS)

    James, A.W.; Chave, R.A.; Hippsley, C.A.; Bowen, P.

    1993-01-01

    Micromechanisms of fracture and fatigue crack growth resistance in specific Ti 3 Al based and TiAl based intermetallics are reviewed. Effects of test temperature, environment and microstructure on crack growth resistance are considered in detail for several Ti 3 Al and Ti'Al based intermetallic systems under development. The implications of these studies for the structural reliability of these materials is also addressed briefly. (orig.)

  7. TiC/Ti3SiC2复合材料的制备及其性能研究%Preparation and properties of TiC/Ti3SiC2 composites

    Institute of Scientific and Technical Information of China (English)

    贾换; 尹洪峰; 袁蝴蝶; 杨祎诺

    2012-01-01

    以粉末Ti,Si,TiC和炭黑为原料,采用反应热压烧结法制备TiC/Ti3SiC2复合材料.借助XRD和SEM研究TiC含量对TiC/Ti3SiC2复合材料相组成、显微结构及力学特性的影响.结果表明:通过热压烧结可以得到致密度较高的TiC/Ti3SiC2复合材料;引入TiC可以促进Ti3SiC2的生成,当引入TiC的质量分数达30%,TiC/Ti3SiC2复合材料的弯曲强度和断裂韧性分别为406.9 MPa,3.7 MPa·m1/2;复合材料中Ti3SiC2相以穿晶断裂为主,TiC晶粒易产生拔出.%TiC/Ti3SiC2 composites were fabricated by reactive hot pressing sintering method using the mixture powder of Ti, Si, C and TiC as raw material. The effect of TiC content on phase composition, microstructure and mechanical properties of TiC/Ti3SiC2 composites was investigated by X-ray diffraction and scanning electron microscopy. The results demonstrate that dense TiC/ Ti3SiC2 composites can be obtained by hot pressing. The addition of TiC into composites can enhance the formation of TisSiC2. When the additional content of TiC reaches 30% (mass fraction) , the flexural strength and fracture toughness of TiC/Ti3SiC2 composite are 406.9 MPa and 3.7 MPa·m-2, respectively. Ti3SiC2 phase displays intergranular fracture and TiC grain pulls out from Ti3SiC2 matrix when TiC/Ti3SiC2 composite fractures.

  8. The permeation behavior of deuterium through 1Cr18Ni9Ti stainless steel with TiN+TiC-TiN multiple films

    International Nuclear Information System (INIS)

    Xiong, Y.; Song, J.; Luo, D.; Lei, Q.; Chen, C.

    2015-01-01

    The prevention of tritium losses via permeation through structure components is an important issue in fusion technology. The production of thin layers on materials with low diffusivity and/or low surface recombination constants (so-called permeation barriers) seems to be the most practical method to reduce or hinder the permeation of tritium through materials. TiN+TiC+TiN multiple films are deposited on the surface of 1Cr18Ni9Ti stainless steel by ion-beam assisted deposition technology. The characteristics of films are tested by XPS ASEM and XRD, which shows that the film are compact and uniform with a thickness of about 15 μm, and have a good adherence with the substrate below 773 K. The diffraction peaks in the XRD patterns for TiC and TiN are broadened, implying that the multiple films are deposited on the surface of 1Cr18Ni9Ti stainless steel. Meanwhile, the C-H bonded CH 4 -appears in the infrared spectra of multiple films, suggesting that the CH 4 - is in a static state, so hydrogen atom cannot migrate from the site bonded with carbon to a neighboring site. The measured deuterium permeability in 1Cr18Ni9Ti stainless steel coated with multiple films is 2-3 orders of magnitude lower than that of pure 1Cr18Ni9Ti stainless steel substrate from 473 K to 773 K. However, this barrier is partly destroyed above 773 K

  9. Synthesis, microstructure and mechanical properties of Ti3SiC2-TiC composites pulse discharge sintered from Ti/Si/TiC powder mixture

    International Nuclear Information System (INIS)

    Tian Wubian; Sun Zhengming; Hashimoto, Hitoshi; Du Yulei

    2009-01-01

    Ti 3 SiC 2 -TiC composites with the volume fractions of TiC from 0 to 90% were fabricated by pulse discharge sintering (PDS) technique using Ti-Si-TiC as starting powders in the sintering temperature range of 1250-1400 deg. C. Phase content and microstructure of the synthesized samples were analyzed by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The samples sintered at 1400 deg. C are almost fully dense for all compositions with relative density higher than 98%. The phase distribution in the synthesized samples is non-uniform. The Vickers hardness increases almost linearly with the volume fraction of TiC up to a value of 20.1 ± 1.4 GPa at 90 vol.% TiC. The flexural strength increases with the volume fraction of TiC to a maximum value of 655 ± 10 MPa at 50 vol.% TiC. The relationship between microstructure and mechanical properties is discussed.

  10. XPS investigations of tribolayers formed on TiN and (Ti,Re)N coatings

    Energy Technology Data Exchange (ETDEWEB)

    Oktay, Serkan; Kahraman, Zafer; Urgen, Mustafa; Kazmanli, Kursat, E-mail: kursat@itu.edu.tr

    2015-02-15

    Graphical abstract: - Highlights: • The (Ti,Re)N coating (8 ± 1.9 at.% Re) consisted of TiN and ReNx (x > 1.33) phases. • TiO{sub 2} provided low friction coefficient to TiN coating at 150 °C. • Re addition to TiN drastically dropped the friction coefficients to 0.17–0.22. • Re{sub 2}O{sub 7} provided very low friction coefficient to (Ti,Re)N coating. • Re addition to TiN improved the wear behavior. - Abstract: TiN and (Ti,Re)N coatings were deposited on high-speed-steel substrates by a hybrid coating system composed of cathodic arc PVD and magnetron sputtering techniques. In order to keep rhenium content low (8 ± 1.9 at.%) in the coating, magnetron sputtering technique was utilized to evaporate rhenium. The (Ti,Re)N coating consisted of TiN and ReN{sub x} (x > 1.33) phases. The hardness of TiN and (Ti,Re)N were 31 GPa and 29 GPa ( ± 2 GPa), respectively. Tribological behaviors of the samples were tested against Al{sub 2}O{sub 3} balls at 21 °C (RT) and 150 °C (HT) by reciprocating wear technique. The tribolayers were analyzed by XPS technique. Friction coefficients of TiN were 0.56, 0.35 for 21 °C and 150 °C tests, respectively. Rhenium addition to TiN drastically dropped the friction coefficients to 0.22 and 0.17 for RT and HT samples. Rhenium addition also improved the wear resistance of the coating at both test temperatures. For TiN, main oxide component of the tribolayers was Ti{sub 2}O{sub 3} for RT tests and TiO{sub 2} for HT tests. The oxide layer formed on (Ti,Re)N were the mixture of TiO{sub 2}, Ti−O−N, ReO{sub 2} and Re{sub 2}O{sub 7} for both test temperatures. Re{sub 2}O{sub 7} provided very low friction coefficient to (Ti,Re)N. The findings are consistent with the crystal chemistry approach.

  11. Nota biobibliográfica + poética + creaciones («Fantasia», «Per a prendre mesures», «Constel·lació de la fam», «Ora pro nobis», «Línia quasi eròtica» y «Beatus ille» + cuestionario (Victoria Pineda

    Directory of Open Access Journals (Sweden)

    Josep Sou

    2014-03-01

    Full Text Available Nota biobibliográfica + poética + creaciones («Fantasia», «Per a prendre mesures», «Constel·lació de la fam», «Ora pro nobis», «Línia quasi eròtica» y «Beatus ille» + cuestionario (Victoria Pineda

  12. Nota biobibliográfica + poética + creaciones («Uves migratorias», «Fronteras del hambre», «Puntos de sutura», «Paisaje urbano 2», «El intruso» y «Mirada rota» + cuestionario (Victoria Pineda

    Directory of Open Access Journals (Sweden)

    Julián Alonso

    2014-03-01

    Full Text Available Nota biobibliográfica + poética + creaciones («Uves migratorias», «Fronteras del hambre», «Puntos de sutura», «Paisaje urbano 2», «El intruso» y «Mirada rota» + cuestionario (Victoria Pineda

  13. Diálogos latino-americanos. Correspondência entre Ángel Rama, Berta e Darcy Ribeiro. Organización, estudios y notas de Haydée Ribeiro Coelho y Pablo Rocca. São Paulo: Global Editora, 2015. 189 pp.

    Directory of Open Access Journals (Sweden)

    Facundo Gómez

    2017-01-01

    Full Text Available Reseña de Diálogos latino-americanos. Correspondência entre Ángel Rama, Berta e Darcy Ribeiro. Organización, estudios y notas de Haydée Ribeiro Coelho y Pablo Rocca. São Paulo: Global Editora, 2015. 189 pp.

  14. Latvijas sabiedrisko attiecību aģentūru prakse plānotas krīzes komunikācijas vadīšanā

    OpenAIRE

    Štokmane, Linda

    2014-01-01

    Darba nosaukums ir „Latvijas sabiedrisko attiecību aģentūru prakse plānotas krīzes komunikācijas vadīšanā”. Pētījuma problēma - vai krīzes situācijām iespējams sagatavoties un kā iepriekš plānota un sagatavota komunikācija spēj palīdzēt efektīvāk vadīt krīzes situācijas? Bakalaura darba mērķis ir izpētīt, kāda ir Latvijas sab iedrisko attiecību aģentūru prakse un pieredze krīzes komunikācijas plānošanā un vadīšanā. Darba teorētiskā bāze, galvenokārt, balstīta uz situatīvo krīzes komunikāci...

  15. Nota sobre una propuesta de traducción de rótulos del alfabeto fonético internacional* A note on a translation proposal of the labels of the ipa

    Directory of Open Access Journals (Sweden)

    Roberto Alfredo Perry Carrasco

    2008-12-01

    Full Text Available Esta nota propone traducciones para algunos de los rótulos usados para las categorías fonéticas del Alfabeto Fonético Internacional. La introducción del texto plantea la temática de la nota; la segunda sección argumenta sobre cuál es el fundamento natural de los criterios con que se eligen tales rótulos; la tercera sección argumenta en defensa de algunas opciones y la cuarta y última discute algunos rótulos para los llamados símbolos diacríticos.The present article proposes the translation of some labels used for the phonetic categories of the International Phonetic Alphabet. The topic of the article is presented in the introduction; a discussion concerning the natural rationale for the criteria used in the selection of such labels is presented in the the second section; an argument in favor of some options is presented in the third section, and the rationale for the use of certain labels of the so-called diacritics is found in the fourth and last section.

  16. Ocho notas críticas sobre políticas de protección a niños y adolescentes en América Latina

    Directory of Open Access Journals (Sweden)

    Mónica De Martino

    2010-07-01

    Full Text Available La ponencia intenta colocar ocho observaciones críticas a las actuales políticas de protección a la infancia y la adolescencia en la región. Cuatro de ellas, en nuestra opinión, derivan de la forma como fue abordado el campo de la infancia y la adolescencia, desde una perspectiva histórica, tanto desde la política como de la academia. En otras palabras, son notas intrínsecas a la relación infancia, pobreza y Estado. Las cuatro restantes se vinculan al actual sistema de protecciones sociales vigente en la región, que apunta a regular la pobreza bajo el signo de políticas sociales y políticas punitivas. La infancia, como “puerta de entrada” a la familia y sus secretos, habilitó históricamente, a partir de las políticas dirigidas a ella, la gestión social y política de la pobreza y de la población en general. Estas últimas cuatro notas críticas son intrínsecas a las actuales formas de ejercicio del poder gubernamental y a la concepción de qué debe ser protegido y cómo. Obviamente, los ocho comentarios se desglosan de esta manera a los meros efectos desu exposición.

  17. Biomineralisation with Saos-2 bone cells on TiSiN sputtered Ti alloys.

    Science.gov (United States)

    V V, Anusha Thampi; Bendavid, Avi; Martin, P J; Vaithilingam, Vijay; Bean, Penelope A; Evans, Margaret D M; Subramanian, B

    2017-07-01

    Surface modifications of metallic implants are important in order to protect the underlying metals from the harsh corrosive environment inside the human body and to minimize the losses caused by wear. Recently, researches are carried out in developing bioactive surfaces on metallic implants, which supports the growth and proliferation of cells on to these surfaces. Titanium silicon nitride (TiSiN) hard nanocomposites thin films were fabricated on Ti alloys (Ti-6Al-4V) by pulsed direct current (DC) reactive magnetron sputtering. The films were characterized for its microstructural and electrochemical behavior. The higher charge transfer resistance (Rct) and positive shift in Ecorr value of TiSiN/Ti alloys than the bare Ti-alloys indicates a better corrosion resistance offered by the TiSiN thin films to the underlying substrates. The biological response to TiSiN/Ti alloys and control bare Ti-alloys was measured in vitro using cell-based assays with two main outcomes. Firstly, neither the Ti alloy nor the TiSiN thin film was cytotoxic to cells. Secondly, the TiSiN thin film promoted differentiation of human bone cells above the bare control Ti alloy as measured by alkaline phosphatase and calcium production. TiSiN thin films provide better corrosion resistance and protect the underlying metal from the corrosive environment. The thin film surface is both biocompatible and bioactive as indicated from the cytotoxicity and biomineralization studies. Copyright © 2017 Elsevier B.V. All rights reserved.

  18. Effect of nano-CeO2 on microstructure properties of TiC/TiN+nTi(CN) reinforced composite coating

    International Nuclear Information System (INIS)

    Jianing, Li; Chuanzhong, Chen; Cuifang, Zhang

    2012-01-01

    TiC/TiN+TiCN reinforced composite coatings were fabricated on Ti-6Al-4V alloy by laser cladding, which improved surface performance of the substrate. Nano-CeO 2 was able to suppress crystallization and growth of the crystals in the laser-cladded coating to a certain extent. With the addition of proper content of nano-CeO 2 , this coating exhibited fine microstructure. In this study, the Al 3 Ti+TiC/TiN+nano-CeO 2 laser-cladded coatings were studied by means of X-ray diffraction and scanning electron microscope. The X-ray diffraction results indicated that the Al 3 Ti+TiC/TiN+nano-CeO 2 laser-cladded coating consisted of Ti 3 Al, TiC, TiN, Ti 2 Al 20 Ce, TiC 0.3 N 0.7 , Ce(CN) 3 and CeO 2 , this phase constituent was beneficial to increase the microhardness and wear resistance of Ti-6Al-6V alloy. (author)

  19. Effect of TiH2 in the preparation of MMC Ti based with TiC reinforcement

    International Nuclear Information System (INIS)

    Peillon, N.; Fruhauf, J.B.; Gourdet, S.; Feraille, J.; Saunier, S.; Desrayaud, C.

    2015-01-01

    Highlights: • Using TiH 2 precursors promotes the MMC densification and microstructure homogeneity. • Clear description of the TiH 2 interest and limitations. • Coupling of TGA, TMA and EBSD analyses to investigate the sintering process of MMC. • Process parameters: granulometry, precursor composition, temperature and rate. - Abstract: Many studies were carried out on the elaboration Metal Matrix Composites (MMCs) and a wide variety of process is reported in the bibliography. For titanium based MMC, the basis material for these elaboration techniques mainly consists of atomized titanium powder. In this work a titanium hydride powder is used to elaborate Ti/TiC MMC. Although an additional dehydrogenation operation is required a significant decrease of the sintering temperature is expected with this basis powder. In this context, the behavior of titanium hydride powder mixed with 0, 10 and 20 vol.% TiC reinforcement is studied during densification by free sintering. The effects of particle size, temperature and rate of sintering reinforcement are discussed. The comparison of the TiH 2 process with Ti HDH (Hydride Dehydride) and atomized Ti mixture is made with 10 vol.% reinforcement. The results indicate that the sintering temperature is lowered and the final densities achieved are higher if the hydride is used. Interactions between dehydrogenation and sintering mechanisms clearly appear for the higher sintering temperature rate (10 °C/min) and need specific attention to prevent porosity nucleation through hydrogen entrapment

  20. In situ preparation of (TiB + TiC + Nd2O3)/Ti composites by powder metallurgy

    International Nuclear Information System (INIS)

    Lu Junqiang; Qin Jining; Lu Weijie; Liu Yang; Gu Jiajun; Zhang Di

    2009-01-01

    Titanium matrix composites reinforced with multiple ceramic particulates TiB, TiC and Nd 2 O 3 were prepared by powder metallurgy utilizing the chemical reactions among Ti, B 4 C, NdB 6 and oxygen in Ti powder. The thermodynamic feasibility of the in situ reaction has been calculated. The phases were identified by X-ray diffraction (XRD). The result shows that multiple ceramic phases TiB, TiC and Nd 2 O 3 particulates have been synthesized. The microstructures were examined by means of optical microscopy (OM), scanning electron microscopy (SEM), backscattered electron microscopy and transmission electron microscope (TEM). The results show that the reinforcements are distributed uniformly in the matrix alloy and grow in different shapes. TiB grows in needle shape; TiC and Nd 2 O 3 grow in equiaxed or near-equiaxed shapes. The addition of NdB 6 is beneficial to grain refinement, grain-boundary purification and porosity reduction

  1. The Formation Time of Ti-O• and Ti-O•-Ti Radicals at the n-SrTiO3/Aqueous Interface during Photocatalytic Water Oxidation.

    Science.gov (United States)

    Chen, Xihan; Choing, Stephanie N; Aschaffenburg, Daniel J; Pemmaraju, C D; Prendergast, David; Cuk, Tanja

    2017-02-08

    The initial step of photocatalytic water oxidation reaction at the metal oxide/aqueous interface involves intermediates formed by trapping photogenerated, valence band holes on different reactive sites of the oxide surface. In SrTiO 3, these one-electron intermediates are radicals located in Ti-O • (oxyl) and Ti-O • -Ti (bridge) groups arranged perpendicular and parallel to the surface respectively, and form electronic states in the band gap of SrTiO 3 . Using an ultrafast sub band gap probe of 400 nm and white light, we excited transitions between these radical states and the conduction band. By measuring the time evolution of surface reflectivity following the pump pulse of 266 nm light, we determined an initial radical formation time of 1.3 ± 0.2 ps, which is identical to the time to populate the surface with titanium oxyl (Ti-O • ) radicals. The oxyl was separately observed by a subsurface vibration near 800 cm -1 from Ti-O located in the plane right below Ti-O • . Second, a polarized transition optical dipole allows us to assign the 1.3 ps time constant to the production of both O-site radicals. After a 4.5 ps delay, another distinct surface species forms with a time constant of 36 ± 10 ps with a yet undetermined structure. As would be expected, the radicals' decay, specifically probed by the oxyl's subsurface vibration, parallels that of the photocurrent. Our results led us to propose a nonadiabatic kinetic mechanism for generating radicals of the type Ti-O • and Ti-O • -Ti from valence band holes based on their solvation at aqueous interfaces.

  2. A study on wear resistance and microcrack of the Ti3Al/TiAl + TiC ceramic layer deposited by laser cladding on Ti-6Al-4V alloy

    International Nuclear Information System (INIS)

    Li Jianing; Chen Chuanzhong; Squartini, Tiziano; He Qingshan

    2010-01-01

    Laser cladding of the Al + TiC alloy powder on Ti-6Al-4V alloy can form the Ti 3 Al/TiAl + TiC ceramic layer. In this study, TiC particle-dispersed Ti 3 Al/TiAl matrix ceramic layer on the Ti-6Al-4V alloy by laser cladding has been researched by means of X-ray diffraction, scanning electron microscope, electron probe micro-analyzer, energy dispersive spectrometer. The main difference from the earlier reports is that Ti 3 Al/TiAl has been chosen as the matrix of the composite coating. The wear resistance of the Al + 30 wt.% TiC and the Al + 40 wt.% TiC cladding layer was approximately 2 times greater than that of the Ti-6Al-4V substrate due to the reinforcement of the Ti 3 Al/TiAl + TiC hard phases. However, when the TiC mass percent was above 40 wt.%, the thermal stress value was greater than the materials yield strength limit in the ceramic layer, the microcrack was present and its wear resistance decreased.

  3. A study on wear resistance and microcrack of the Ti{sub 3}Al/TiAl + TiC ceramic layer deposited by laser cladding on Ti-6Al-4V alloy

    Energy Technology Data Exchange (ETDEWEB)

    Li Jianing, E-mail: ljnljn1022@163.com [Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials (Ministry of Education), Department of Materials Science, Shandong University, Jing Shi Road 17923, Jinan 250061, Shandong (China); Chen Chuanzhong [Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials, Ministry of Education, Department of Materials Science, Shandong University, Jing Shi Road 17923, Jinan 250061, Shandong (China); Squartini, Tiziano [INFM-Department of Physics, Siena University, Siena 53100 (Italy); He Qingshan [Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials, Ministry of Education, Department of Materials Science, Shandong University, Jing Shi Road 17923, Jinan 250061, Shandong (China)

    2010-12-15

    Laser cladding of the Al + TiC alloy powder on Ti-6Al-4V alloy can form the Ti{sub 3}Al/TiAl + TiC ceramic layer. In this study, TiC particle-dispersed Ti{sub 3}Al/TiAl matrix ceramic layer on the Ti-6Al-4V alloy by laser cladding has been researched by means of X-ray diffraction, scanning electron microscope, electron probe micro-analyzer, energy dispersive spectrometer. The main difference from the earlier reports is that Ti{sub 3}Al/TiAl has been chosen as the matrix of the composite coating. The wear resistance of the Al + 30 wt.% TiC and the Al + 40 wt.% TiC cladding layer was approximately 2 times greater than that of the Ti-6Al-4V substrate due to the reinforcement of the Ti{sub 3}Al/TiAl + TiC hard phases. However, when the TiC mass percent was above 40 wt.%, the thermal stress value was greater than the materials yield strength limit in the ceramic layer, the microcrack was present and its wear resistance decreased.

  4. Wear evaluation of WC inserts coated with TiN/TiAlN multinanolayers

    OpenAIRE

    Moreno, L. H.; Ciacedo, J. C.; Martinez, F.; Bejarano, G.; Battaille, T. S.; Prieto, P.

    2010-01-01

    TiN/TiAlN multilayers were deposited by radio frequency, r.f., reactive magnetron sputtering by using titanium and aluminum targets with 10 cm diameter and 99.99% purity in an argon/nitrogen atmosphere, applying a substrate temperature of 300 ºC. WC inserts were used as substrates to improve the mechanical and tribological properties of TiN/TiAlN multilayered coatings compared to other types of coatings like TiAlN monolayers and to manage greater efficiency of these coatings in different indu...

  5. Critical Temperature tuning of Ti/TiN multilayer films suitable for low temperature detectors

    OpenAIRE

    Giachero, A.; Day, P.; Falferi, P.; Faverzani, M.; Ferri, E.; Giordano, C.; Marghesin, B.; Mattedi, F.; Mezzena, R.; Nizzolo, R.; Nucciotti, A.

    2013-01-01

    We present our current progress on the design and test of Ti/TiN Multilayer for use in Kinetic Inductance Detectors (KIDs). Sensors based on sub-stoichiometric TiN film are commonly used in several applications. However, it is difficult to control the targeted critical temperature $T_C$, to maintain precise control of the nitrogen incorporation process and to obtain a production uniformity. To avoid these problems we investigated multilayer Ti/TiN films that show a high uniformity coupled wit...

  6. Structure characterization of Ni/NiO and Ti/TiO2 interfaces

    International Nuclear Information System (INIS)

    Lamine, Brahim

    1983-01-01

    This research thesis reports the structure characterization of Ni-NiO and Ti-TiO 2 interfaces through an in-situ investigation of thin blade oxidation, of oxide germination and growth, and through a determination of mutual metal/oxide orientation relationships. Thin films of TiO 2 have also been characterized and the study of the influence of vacuum annealing on TiO 2 layer structure and morphology has been attempted. The examination of metal-oxide interface reveals a duplex structure of NiO and TiO 2 layers, and a preferential grain boundary oxidation of the underlying metal [fr

  7. Highly uniform bipolar resistive switching characteristics in TiO2/BaTiO3/TiO2 multilayer

    International Nuclear Information System (INIS)

    Ma, W. J.; Zhang, X. Y.; Wang, Ying; Zheng, Yue; Lin, S. P.; Luo, J. M.; Wang, B.; Li, Z. X.

    2013-01-01

    Nanoscale multilayer structure TiO 2 /BaTiO 3 /TiO 2 has been fabricated on Pt/Ti/SiO 2 /Si substrate by chemical solution deposition method. Highly uniform bipolar resistive switching (BRS) characteristics have been observed in Pt/TiO 2 /BaTiO 3 /TiO 2 /Pt cells. Analysis of the current-voltage relationship demonstrates that the space-charge-limited current conduction controlled by the localized oxygen vacancies should be important to the resistive switching behavior. X-ray photoelectron spectroscopy results indicated that oxygen vacancies in TiO 2 play a crucial role in the resistive switching phenomenon and the introduced TiO 2 /BaTiO 3 interfaces result in the high uniformity of bipolar resistive switching characteristics

  8. Corrosion Behavior of Ti/TiN Film Coated on AISI 304 Stainless Steel

    Energy Technology Data Exchange (ETDEWEB)

    Choe, Han Cheol [Kwangyang College, Gwangyang (Korea, Republic of); Park, Ji Yoon; Kim, Kwan Hyu [Chonnam National University, Gwangju (Korea, Republic of)

    2000-06-15

    Effects of the Ti content and the presence of Ti underlayer on the corrosion behaviors of TiN coated AISI 304 stainless steel have been studied. The stainless steel containing 0.1{approx}1.0 wt% Ti were melted with a vacuum furnace and heat treated at 1050 .deg. C for 1hr for solutionization. The specimens were coated with Ti and TiN with thickness of 1 {mu}m and 2 {mu}m respectively by electron-beam physical vapour deposition (EB-PVD) method. The microstructures and phase analysis were conducted by using SEM and WDS. The coated films showed fine columnar structure. The corrosion potential obtained from the anodic polarization curves measured in H{sub 2}SO{sub 4} solution increased in proportion to the Ti content of substrate and was much higher in the specimen coated with Ti underlayer compared to the specimen without Ti underlayer. The potential-time and the current-time curves which were obtained in 0.1M H{sub 2}SO{sub 4} + 0.1M HCI solution showed that both the increase in Ti content and the presence of Ti underlayer increased the potential and decreased the current density resulting in a dense passive film and a suppress of pit formation respectively.

  9. Formation of hydroxyapatite on Ti-coated Ti-Zr-Cu-Pd bulk metallic glass

    International Nuclear Information System (INIS)

    Qin, F.X.; Wang, X.M.; Wada, T.; Xie, G.Q.; Asami, K.; Inoue, A.

    2009-01-01

    In this research, Ti coating was conducted on Ti 40 Zr 10 Cu 36 Pd 14 bulk metallic glass (BMG) in order to increase the formation rate of hydroxyapatite layer. The formation behavior of bone-like hydroxyapatite on Ti-coated and uncoated Ti 40 Zr 10 Cu 36 Pd 14 bulk metallic glasses (BMGs) was studied. The surface morphology of Ti-coated and uncoated Ti 40 Zr 10 Cu 36 Pd 14 BMG was investigated by scanning electron microscopy and energy dispersive X-ray spectroscopy. The results revealed that the alkali pretreatment in 5 M NaOH solution at 60degC for 24 h had a beneficial effect on the formation of porous sodium titanate on Ti-coated Ti 40 Zr 10 Cu 36 Pd 14 BMG. A bone-like hydroxyapatite layer was able to form on the alkali-treated Ti-coated Ti 40 Zr 10 Cu 36 Pd 14 BMG after a short-time immersion in simulated body fluid (SBF). On the contrary, hydroxyapatite formation was not observed on the uncoated Ti 40 Zr 10 Cu 36 Pd 14 BMG after the same chemical treatments. (author)

  10. Electrolytic Production of Ti5Si3/TiC Composites by Solid Oxide Membrane Technology

    Science.gov (United States)

    Zheng, Kai; Zou, Xingli; Xie, Xueliang; Lu, Changyuan; Chen, Chaoyi; Xu, Qian; Lu, Xionggang

    2018-02-01

    This paper investigated the electrolytic production of Ti5Si3/TiC composites from TiO2/SiO2/C in molten CaCl2. The solid-oxide oxygen-ion-conducting membrane tube filled with carbon-saturated liquid tin was served as the anode, and the pressed spherical TiO2/SiO2/C pellet was used as the cathode. The electrochemical reduction process was carried out at 1273 K and 3.8 V. The characteristics of the obtained cathode products and the reaction mechanism of the electroreduction process were studied by a series of time-dependent electroreduction experiments. It was found that the electroreduction process generally proceeds through the following steps: TiO2/SiO2/C → Ti2O3, CaTiO3, Ca2SiO4, SiC → Ti5Si3, TiC. The morphology observation and the elemental distribution analysis indicate that the reaction routes for Ti5Si3 and TiC products are independent during the electroreduction process.

  11. Laser processing of in situ TiN/Ti composite coating on titanium.

    Science.gov (United States)

    Sahasrabudhe, Himanshu; Soderlind, Julie; Bandyopadhyay, Amit

    2016-01-01

    Laser remelting of commercially pure titanium (CP-Ti) surface was done in a nitrogen rich inert atmosphere to form in situ TiN/Ti composite coating. Laser surface remelting was performed at two different laser powers of 425 W and 475 W. At each power, samples were fabricated with one or two laser scans. The resultant material was a nitride rich in situ coating that was created on the surface. The cross sections revealed a graded microstructure. There was presence of nitride rich dendrites dispersed in α-Ti matrix at the uppermost region. The structure gradually changed with lesser dendrites and more heat affected α-Ti phase maintaining a smooth interface. With increasing laser power, the dendrites appeared to be larger in size. Samples with two laser scans showed discontinuous dendrites and more α-Ti phase as compared to the samples with one laser scan. The resultant composite of TiN along with Ti2N in α-Ti showed substantially higher hardness and wear resistance than the untreated CP-Ti substrate. Coefficient of friction was also found to reduce due to surface nitridation. Leaching of Ti(4+) ions during wear test in DI water medium was found to reduce due to laser surface nitriding. Copyright © 2015 Elsevier Ltd. All rights reserved.

  12. XPS STRUCTURE ANALYSIS OF TiN/TiC BILAYERS PRODUCED BY PULSED VACUUM ARC DISCHARGE

    Directory of Open Access Journals (Sweden)

    ELISABETH RESTREPO PARRA

    2010-01-01

    Full Text Available se crecieron bicapas de TiN/TiC sobre sustratos de acero inoxidable 304 usando un sistema de deposición física de vapor asistida por plasma en forma de arco pulsado a dos diferentes temperaturas del sustrato (50º C y150º C. Para el análisis de la composición química se empleó la técnica de la espectroscopía de fotoelectrones de rayos X (XPS. Se observó el comportamiento de las líneas Ti2p, N1s y C1s. Los análisis de energía de enlace confirmaron la conformación de TiN y TiC. Los picos C1s y Ti2p sufrieron un corrimiento a medida que se incrementó el tiempo de esputtering, revelando contaminación debido a la presencia de hidrocarburos. Además, los perfiles de profundidad de las bicapas de TiN/TiC mostraron que las películas crecidas a una temperatura de 150 ° C tienen una capa de TiN más gruesa que las muestras crecidas a 50º C. El nitrógeno se difundió en la capa de TiC y el carbón en la capa de TiN para ambas temperaturas.

  13. Strengthening mechanisms in Ti-6Al-4V/TiC composites

    International Nuclear Information System (INIS)

    Johnson, A.J. Wagoner; Kumar, K.S.; Briant, C.L.

    2004-01-01

    In this study, the compressive behavior of Ti-6Al-4V/TiC composites considered for ballistic applications was examined at strain rates of 0.1, 1.0, and 10 s-1. As little as 1 vol% of particulate TiC provided nearly a 25% increase in strength in Ti-6Al-4V/TiC composites over that of the monolithic Ti-6Al-4V, while subsequent additions of TiC did not provide proportional benefit. The mechanisms responsible for such a significant increase in strength were investigated for the first time in this study. Microscopy (optical, SEM, TEM) aided in identifying the possible strengthening mechanisms that are typically important to the strength of metal matrix composites. These mechanisms include grain size and subgrain size refinement and an increase in dislocation density, all of which can occur during processing. Two other important mechanisms are thermal mismatch strains and load transfer from the matrix to the particle; the contribution of these mechanisms to the strength of the composite was evaluated using the Eshelby approach. A quantitative comparison of the mechanisms listed clearly showed that none of them was responsible for the large increase in strength with only 1vol%TiC in Ti-6Al-4V. The results from this study show for the first time that carbon in solution is, by far, the most potent strengthening mechanism in the Ti-6Al-4V/TiC particulate composites

  14. Thermal quantities of 46Ti

    International Nuclear Information System (INIS)

    Rahmatinejad, A.; Razavi, R.; Kakavand, T.

    2015-01-01

    Thermodynamic quantities of 46 Ti have been calculated in the framework of the BCS model with inclusion of modified nuclear pairing gap (MPBCS) that was proposed in our previous publication. Using modified paring gap results in an S-shaped heat capacity curve at critical temperature with a smooth behavior instead of singular behavior of the same curve in the BCS calculations. In addition the thermal quantities have been extracted within the framework of a canonical ensemble according to the new experimental data on nuclear level densities measured by the Oslo group. Comparison shows a good agreement between our calculations in MPBCS and the extracted quantities in the canonical ensemble framework

  15. Algumas notas sobre educação e ética à luz do pensamento de Kant = Some notes on education and ethics in the light of the thought of Kant = Algunas notas sobre la educación y la ética a la luz del pensamiento de Kant

    Directory of Open Access Journals (Sweden)

    Menezes, Edmilson

    2014-01-01

    Full Text Available O presente ensaio tem por objetivo estabelecer alguma reflexão sobre o tema da educação e da ética a partir da leitura acerca do pensamento pedagógico de Kant expresso no texto Sobre a pedagogia. O referido trabalho origina-se de um curso ministrado pelo filósofo junto à Universidade de Könisberg. É considerado pela literatura como um texto menor, em virtude inclusive de ter sido publicado postumamente por um de Kant – Theodor Rink –, a partir de notas e apontamentos tomados para as preleções do professor sobre temas concernentes à pedagogia. Compreende-se que o texto Sobre a pedagogia ilustra o modo pelo qual Kant pensava a educação. Iluminado pelos escritos de Rousseau, mas profundamente tributário da literatura da Ilustração, destaca-se no trabalho a busca de compreensão da questão da moralidade. Kant considera uma dimensão moral inclusive no ato de instruir, cuja âncora deve ser a transposição da natureza para preparar a maioridade do juízo, e a infância e a juventude para a vida na coletividade

  16. Uniform distribution of TiCp in TiCp/Zn-Al composites prepared by XDTM

    Institute of Scientific and Technical Information of China (English)

    王香; 马旭梁; 李庆芬; 曾松岩

    2002-01-01

    The prefabricated Al/TiC alloy with high TiC particle content was prepared by XDTM process. The uniform distribution process of TiC particles in the stationary zinc melt was studied and analyzed using self-made experimental equipment, and the model of the uniform distribution process was built. The results show that zinc diffuses into the prepared Al/TiC alloy after it is placed in the zinc melt at temperatures below the melting point of aluminum, which leads to the decrease of the liquidus temperature of Al-Zn alloy in the surface layer of Al/TiC alloy. When the liquidus temperature of Al-Zn alloy is equal to or below the temperature of zinc melt, Al-Zn alloy melts and TiC particles drop with it from the Al/TiC alloy and then transfer into the zinc melt and finally distribute uniformly in it.

  17. Swelling and irradiation creep of neutron irradiated 316Ti and 15-15Ti steels

    International Nuclear Information System (INIS)

    Maillard, A.; Touron, H.; Seran, J.L.; Chalony, A.

    1992-01-01

    The global behavior, the swelling and irradiation creep resistances of cold worked 316Ti and 15-15Ti, two variants of austenitic steels in use as core component materials of the French fast reactors, are compared. The 15-15Ti leads to a significant improvement due to an increase in the incubation dose swelling. The same phenomena observed on 316Ti are found on 15-15Ti. All species without fuel like samples, wrappers or empty clad swell and creep less than fuel pin cladding irradiated in the same conditions. To explain the swelling difference, as for 316Ti, thermal gradient is also invoked but the irradiation creep difference is not yet clearly understood. To predict the behavior of clads it is indispensable to study the species themselves and to use specific rules. All results confirm the good behavior of 15-15Ti, the best behavior being obtained with the 1% Si doped version irradiated up to 115 dpa

  18. Structure, phase composition and microhardness of vacuum-arc multilayered Ti/Al, Ti/Cu, Ti/Fe, Ti/Zr nano-structures with different periods

    International Nuclear Information System (INIS)

    Demchishin, A.V.; Gnilitskyi, I.; Orazi, L.; Ascari, A.

    2015-01-01

    Highlights: • Multilayer coatings of Ti/Fe, Ti/Al, Ti/Cu and Ti/Zr are generated. • Microstructure and morphology of the different systems are investigated. • XR diffraction analysis was performed to investigate phases composition. • Effects of inter metallic phases on microhardess are investigated. • Correlations between parameters and layer thickness are outlined. - Abstract: The microstructure, phase composition and microhardness of multilayered Ti/Al, Ti/Cu, Ti/Fe and Ti/Zr condensates produced on stainless steel substrates via vacuum-arc evaporation of pure metals were studied. The sublayer periods (Λ) were regulated in the range 80–850 nm by varying the vacuum discharge current and the duration of the successive depositions of metallic plasma onto the substrates while maintaining the total deposition time constant. The regularity of the obtained nanostructures was investigated by scanning and transmission electron microscopy while phase compositions were identified with X-ray diffraction (XRD) analysis in order to evidence the presence of interdiffusion and the amount of intermetallics. Condensates cross sections were mechanically characterized by means of microhardness tests. Measurements were correlated to the periods and to the presence of intermetallics

  19. Structure, phase composition and microhardness of vacuum-arc multilayered Ti/Al, Ti/Cu, Ti/Fe, Ti/Zr nano-structures with different periods

    Energy Technology Data Exchange (ETDEWEB)

    Demchishin, A.V., E-mail: ademch@meta.ua [Institute of Problems in Material Science, NASU, Kiev (Ukraine); Gnilitskyi, I., E-mail: iaroslav.gnilitskyi@unimore.it [DISMI – Department of Sciences and Methods for Engineering, University of Modena and Reggio Emilia, Reggio Emilia (Italy); Orazi, L., E-mail: leonardo.orazi@unimore.it [DISMI – Department of Sciences and Methods for Engineering, University of Modena and Reggio Emilia, Reggio Emilia (Italy); Ascari, A., E-mail: a.ascari@unibo.it [DIN – Department of Industrial Engineering, University of Bologna, Bologna (Italy)

    2015-07-01

    Highlights: • Multilayer coatings of Ti/Fe, Ti/Al, Ti/Cu and Ti/Zr are generated. • Microstructure and morphology of the different systems are investigated. • XR diffraction analysis was performed to investigate phases composition. • Effects of inter metallic phases on microhardess are investigated. • Correlations between parameters and layer thickness are outlined. - Abstract: The microstructure, phase composition and microhardness of multilayered Ti/Al, Ti/Cu, Ti/Fe and Ti/Zr condensates produced on stainless steel substrates via vacuum-arc evaporation of pure metals were studied. The sublayer periods (Λ) were regulated in the range 80–850 nm by varying the vacuum discharge current and the duration of the successive depositions of metallic plasma onto the substrates while maintaining the total deposition time constant. The regularity of the obtained nanostructures was investigated by scanning and transmission electron microscopy while phase compositions were identified with X-ray diffraction (XRD) analysis in order to evidence the presence of interdiffusion and the amount of intermetallics. Condensates cross sections were mechanically characterized by means of microhardness tests. Measurements were correlated to the periods and to the presence of intermetallics.

  20. Decorative properties of annealed Ti N coatings

    International Nuclear Information System (INIS)

    Klubovich, V.V.; Rubanik, V.V.; Bagrets, D.A.

    2012-01-01

    The decorative properties of annealed TiN coatings on austenitic stainless steel which were formed by vacuum-arc deposition wen investigated. It was shown the principal possibility to control colour characteristics of TiN films due to heat treatment at different temperature and time that expand their usage as decorative coatings. (authors).

  1. Controllable hydrothermal synthesis of rutile TiO2 hollow nanorod arrays on TiCl4 pretreated Ti foil for DSSC application

    International Nuclear Information System (INIS)

    Xi, Min; Zhang, Yulan; Long, Lizhen; Li, Xinjun

    2014-01-01

    Rutile TiO 2 nanorod arrays (TNRs) were achieved by hydrothermal process on TiCl 4 pretreated Ti foil. Subsequently, TNRs were hydrothermally etched in HCl solution to form hollow TiO 2 nanorod arrays (H-TNRs). The TiCl 4 pretreatment plays key roles in enhancement of Ti foil corrosion resistance ability and crystal nucleation introduction for TNRs growth. TNRs with desired morphology can be obtained by controlling TiCl 4 concentration and the amount of tetrabutyl titanate (TTB) accordingly. TNRs with the length of ∼1.5 μm and diameter of ∼200 nm, obtained on 0.15 M TiCl 4 pretreated Ti foil with 0.6 mL TTB, exhibits relatively higher photocurrent. The increased pore volume of the H-TNRs has contributed to the increased surface area which is benefit for Dye-Sensitized Solar Cells (DSSC) application. And the 180 °C-H-TNRs photoanode obtained from the 0.15-TiCl 4 -TNRs sample demonstrated 128.9% enhancement of photoelectric efficiency of DSSC compared to that of the original TNR photoanode. - Graphical abstract: Rutile hollow TiO 2 nanorod array photoanode obtained from original TiO 2 nanorod array photoanode by hydrothermal etching demonstrates enhanced photoelectric efficiency of DSSC. - Highlights: • TiO 2 nanorods are prepared via hydrothermal process on TiCl 4 -pretreated Ti foil. • Hollow TiO 2 nanorods are obtained by hydrothermal etching of TiO 2 nanorods. • TiCl 4 pretreatment plays a key role in protecting Ti foil from chemical corrosion. • Hollow TiO 2 nanorods photoanode shows enhanced photoelectric efficiency for DSSC

  2. Microstructure and refinement performance of Al-Ti-C master alloy: Effect of excess Ti on the growth and nucleating ability of TiC particles

    Science.gov (United States)

    Svynarenko, Kateryna; Zhang, Yubo; Jie, Jinchuan; Kutsova, Valentyna; Li, Tingju

    2017-09-01

    Al-5Ti-0.2C, Al-0.8Ti-0.2C, Al-8Ti-2C, and Al-10Ti master alloys were prepared and used to investigate the influence of excess Ti on the growth of TiC particles and its ability to nucleate Al-grains. The results of a microstructure analysis of TiC-containing alloys and refined CPAl were interrelated to the results of a refinement test. It was found that the presence of excess Ti is essential at the stage of master alloy preparation, as it facilitates the growth and uniform distribution of TiC within the structure. In Al-5Ti-0.2C alloy containing excess Ti, carbide particles grow faster and to a higher extent (from 0.29 μm to 0.44 μm) compared to Al-0.8Ti-0.2C alloy produced without excess Ti (from 0.29 μm to 0.32 μm). The results support the "Ti-transition zone theory" as the mechanism of grain refinement by TiC-containing master alloys. The refinement performance of Al-5Ti-0.2C is superior compared to the one achieved by adding Al-8Ti-2C and Al-10Ti master alloys in corresponding concentrations. For the TiC particles to become favourable nucleating sites, they must undergo certain interaction with excess Ti at the stage of master alloy preparation.

  3. Antibacterial activity and cell compatibility of TiZrN, TiZrCN, and TiZr-amorphous carbon coatings

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Heng-Li [School of Dentistry, China Medical University, Taichung 404, Taiwan (China); Department of Bioinformatics and Medical Engineering, Asia University, Taichung 41354, Taiwan (China); Chang, Yin-Yu, E-mail: yinyu@nfu.edu.tw [Department of Mechanical and Computer-aided Engineering, National Formosa University, Yunlin 632, Taiwan (China); Liu, Jia-Xu [Department of Mechanical and Computer-aided Engineering, National Formosa University, Yunlin 632, Taiwan (China); Tsai, Ming-Tzu [Department of Biomedical Engineering, Hungkuang University, Taichung 433, Taiwan (China); Lai, Chih-Ho [Department of Microbiology and Immunology, Graduate Institute of Biomedical Sciences, Chang Gung University, Taoyuan, Taiwan (China)

    2015-12-01

    A cathodic-arc evaporation system with plasma-enhanced duct equipment was used to deposit TiZrN, TiZrCN, and TiZr/a-C coatings. Reactive gases (N{sub 2} and C{sub 2}H{sub 2}) activated by the Ti and Zr plasma in the evaporation process was used to deposit the TiZrCN and TiZr/a-C coatings with different C and nitrogen contents. The crystalline structures and bonding states of coatings were analyzed by X-ray diffraction and X-ray photoelectron spectroscopy. The microbial activity of the coatings was evaluated against Staphylococcus aureus (Gram-positive bacteria) and Actinobacillus actinomycetemcomitans (Gram-negative bacteria) by in vitro antibacterial analysis using a fluorescence staining method employing SYTO9 and a bacterial-viability test on an agar plate. The cell compatibility and morphology related to CCD-966SK cell-line human skin fibroblast cells on the coated samples were also determined using the 3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide assay, reverse-transcriptase-polymerase chain reaction, and scanning electron microscopy. The results suggest that the TiZrCN coatings not only possess better antibacterial performance than TiZrN and TiZr/a-C coatings but also maintain good compatibility with human skin fibroblast cells. - Highlights: • TiZrN, TiZrCN, and TiZr/a-C coatings were deposited using cathodic arc evaporation. • The TiZrCN showed a composite structure containing TiN, ZrN, and a-C. • The TiZrCN-coated Ti showed the least hydrophobicity among the samples. • The TiZrCN-coated Ti showed good human skin fibroblast cell viability. • The TiZrCN-coated Ti exhibited good antibacterial performance.

  4. Controllable hydrothermal synthesis of rutile TiO{sub 2} hollow nanorod arrays on TiCl{sub 4} pretreated Ti foil for DSSC application

    Energy Technology Data Exchange (ETDEWEB)

    Xi, Min [Key Laboratory of Renewable Energy, Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou 510640 (China); Zhang, Yulan; Long, Lizhen [Key Laboratory of Renewable Energy, Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou 510640 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Li, Xinjun, E-mail: lixj@ms.giec.ac.cn [Key Laboratory of Renewable Energy, Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou 510640 (China)

    2014-11-15

    Rutile TiO{sub 2} nanorod arrays (TNRs) were achieved by hydrothermal process on TiCl{sub 4} pretreated Ti foil. Subsequently, TNRs were hydrothermally etched in HCl solution to form hollow TiO{sub 2} nanorod arrays (H-TNRs). The TiCl{sub 4} pretreatment plays key roles in enhancement of Ti foil corrosion resistance ability and crystal nucleation introduction for TNRs growth. TNRs with desired morphology can be obtained by controlling TiCl{sub 4} concentration and the amount of tetrabutyl titanate (TTB) accordingly. TNRs with the length of ∼1.5 μm and diameter of ∼200 nm, obtained on 0.15 M TiCl{sub 4} pretreated Ti foil with 0.6 mL TTB, exhibits relatively higher photocurrent. The increased pore volume of the H-TNRs has contributed to the increased surface area which is benefit for Dye-Sensitized Solar Cells (DSSC) application. And the 180 °C-H-TNRs photoanode obtained from the 0.15-TiCl{sub 4}-TNRs sample demonstrated 128.9% enhancement of photoelectric efficiency of DSSC compared to that of the original TNR photoanode. - Graphical abstract: Rutile hollow TiO{sub 2} nanorod array photoanode obtained from original TiO{sub 2} nanorod array photoanode by hydrothermal etching demonstrates enhanced photoelectric efficiency of DSSC. - Highlights: • TiO{sub 2} nanorods are prepared via hydrothermal process on TiCl{sub 4}-pretreated Ti foil. • Hollow TiO{sub 2} nanorods are obtained by hydrothermal etching of TiO{sub 2} nanorods. • TiCl{sub 4} pretreatment plays a key role in protecting Ti foil from chemical corrosion. • Hollow TiO{sub 2} nanorods photoanode shows enhanced photoelectric efficiency for DSSC.

  5. Revision of the Ge–Ti phase diagram and structural stability of the new phase Ge4Ti5

    International Nuclear Information System (INIS)

    Bittner, Roland W.; Colinet, Catherine; Tedenac, Jean-Claude; Richter, Klaus W.

    2013-01-01

    Highlights: •New compound Ge 4 Ti 5 found by experiments and by DFT ground state calculations. •Enthalpies of formation calculated for different Ge–Ti compounds. •Modifications of the Ge–Ti phase diagram suggested. -- Abstract: The binary phase diagram Ge–Ti was investigated experimentally by powder X-ray diffraction, scanning electron microscopy including EDX analysis, and differential thermal analysis. Total energies of the compounds GeTi 3 , GeTi 2 , Ge 3 Ti 5 , Ge 4 Ti 5 , Ge 5 Ti 6 , GeTi and Ge 2 Ti were calculated for various structure types employing electronic density-functional theory (DFT). Experimental studies as well as electronic calculations show the existence of a new phase Ge 4 Ti 5 (Ge 4 Sm 5 -type, oP36, Pnma) which is formed in a solid state reaction Ge 3 Ti 5 + Ge 5 Ti 6 = Ge 4 Ti 5 . In addition, a significant homogeneity range was observed for the compound Ge 3 Ti 5 and the composition of the liquid phase in the eutectic reaction L = Ge + Ge 2 Ti was found to be at significant higher Ge-content (97.5 at.% Ge) than reported in previous studies. Based on these new results, a modified phase diagram Ge–Ti is suggested. The zero-temperature lattice parameters and the formation enthalpies determined by DTF calculations were found to be in good agreement with experimental data

  6. Preparation and mechanical properties of in situ TiC{sub x}–Ni (Si, Ti) alloy composites

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Wenjuan [Institute of Materials Science and Engineering, School of Mechanical, Electronic and Control Engineering, Beijing Jiaotong University, Beijing 100044 (China); Zhai, Hongxiang, E-mail: hxzhai@sina.com [Institute of Materials Science and Engineering, School of Mechanical, Electronic and Control Engineering, Beijing Jiaotong University, Beijing 100044 (China); Chen, Lin; Huang, Zhenying [Institute of Materials Science and Engineering, School of Mechanical, Electronic and Control Engineering, Beijing Jiaotong University, Beijing 100044 (China); Bei, Guoping; Baumgärtner, Christoph; Greil, Peter [Department of Materials Science (Glass and Ceramics), University of Erlangen-Nuernberg, Martensstr. 5, 91058 Erlangen (Germany)

    2014-10-20

    Novel in situ TiC{sub x} reinforced Ni (Si, Ti) alloy composites with superior mechanical properties were prepared at 1250 °C for 30 min by pressureless sintering Ti{sub 3}SiC{sub 2} (10 and 20 vol%) and Ni as precursors. The Ti{sub 3}SiC{sub 2} particles decomposed into substoichiometric TiC{sub x} phase, while the additional Si and partial Ti atoms derived from Ti{sub 3}SiC{sub 2} diffused into Ni matrix to form Ni (Si, Ti) alloy. The in situ formed TiC{sub x} phases are mainly dispersed on the grain boundaries of the Ni (Si, Ti) alloying, forming a strong skeleton and refining the microstructures of the metal matrix. The hardness, the yield stress σ{sub 0.2%} and ultimate compressive strength of 20.6 vol%TiC{sub x}–Ni(Si, Ti) composite can reach 2.15±0.04 GPa, 466.8±55.8 MPa and 733.3±78.4 MPa, respectively. The enhanced mechanical properties of TiC{sub x}–Ni(Si, Ti) composites are due to the in situ formation of TiC{sub x} skeleton, the refined microstructures of Ni (Si, Ti) alloys and solid solution effects as well as good wettability between TiC{sub x} and Ni (Si, Ti) matrix.

  7. Electronic Structures and Bonding Properties of Ti2AlC and Ti3AlC2

    Institute of Scientific and Technical Information of China (English)

    MIN Xinmin; REN Yi

    2007-01-01

    The relation among electronic structure, chemical bond and property of Ti2AlC, Ti3AlC2 and doping Si into Ti2AlC was studied by density function and the discrete variation (DFT-DVM) method. After adding Si into Ti2AlC, the interaction between Si and Ti is weaker than that between Al and Ti, and the strengths of ionic and covalent bonds decrease both. The ionic and covalent bonds in Ti3AlC2, especially in Ti-Al, are stronger than those in Ti2AlC. Therefore, in synthesis of Ti2AlC, the addition of Si enhances the Ti3AlC2 content instead of Ti2AlC. The density of state (DOS) shows that there is mixed conductor characteristic in Ti2AlC and Ti3AlC2. The DOS of Ti3AlC2 is much like that of Ti2AlC. Ti2SixAl1-x C has more obvious tendency to form a semiconductor than Ti2AlC, which is seen from the obvious difference of partial DOS between Si and Al3p.

  8. Photoelectrocatalytic property of microporous Pt-TiO2/Ti electrodes

    International Nuclear Information System (INIS)

    Hung, Chung-Hsuang; Wu, Kee-Rong; Yeh, Chung-Wei; Sun, Jui-Ching; Hsu, Chuan-Jen

    2013-01-01

    This study investigates the photoelectrocatalytic (PEC) property of microporous WO 3 -loaded TiO 2 /Ti layer, prepared via micro-arc oxidation (MAO) of Ti plate, followed by sputtering deposition of a thin Pt layer as a Pt-TiO 2 /Ti electrode. The WO 3 -loaded TiO 2 layer which is associated with a more acidic surface forms many local electrochemical cells on its micro-pores immersed in cationic dye solution. The electrocatalytic (EC) reactions can take place in the local cells by the applied electrons. A low resistivity that is accomplished by MAO technique and by platinization offers an easy path for the electron motions in the Pt-TiO 2 /Ti electrode. All these features make the EC oxidation of aqueous dye pollutants practically feasible without using counter electrodes and supporting electrolytes. Our experiments demonstrate that, under PEC condition, the Pt-TiO 2 /Ti shows the highest degradation rate constant of 0.83 h − 1 at an applied bias of 1.0 V and exhibits significantly high PEC and EC oxidation activities at a low applied bias of 0.25 V. This is attributable to high anodic currents generated in the Pt-TiO 2 /Ti even at low bias. The modified microporous electrodes conclusively reveal a very interesting EC property as a two double-sided device that functions the PEC and EC oxidation simultaneously without a need of supporting electrolyte and expensive Pt cathode. - Highlights: ► Pt-TiO 2 /Ti exhibits enhanced photoelectrocatalytic (PEC) activity at low applied bias. ► The proposed device uses low applied bias (< 1.0 V) with no explicit cathode. ► PEC oxidation can be performed without supporting electrolyte and Pt cathode

  9. Fabrication of Powder Metallurgy Pure Ti Material by Using Thermal Decomposition of TiH2

    Science.gov (United States)

    Mimoto, Takanori; Nakanishi, Nozomi; Umeda, Junko; Kondoh, Katsuyoshi

    Titanium (Ti) and titanium alloys have been interested as an engineering material because they are widely used across various industrial applications, for example, motorcycle, automotive and aerospace industries, due to their light weight, high specific strength and superior corrosion resistance. Ti materials are particularly significant for the aircraft using carbon/carbon (C/C) composites, for example, carbon fiber reinforced plastics (CFRP), because Ti materials are free from the problem of contact corrosion between C/C composites. However, the applications of Ti materials are limited because of their high cost. From a viewpoint of cost reduction, cost effective process to fabricate Ti materials is strongly required. In the present study, the direct consolidation of titanium hydride (TiH2) raw powders in solid-state was employed to fabricate pure Ti bulk materials by using thermal decomposition of TiH2. In general, the production cost of Ti components is expensive due to using commercially pure (CP) Ti powders after dehydrogenation. On the other hand, the novel process using TiH2 powders as starting materials is a promising low cost approach for powder metallurgy (P/M) Ti products. Furthermore, this new process is also attractive from a viewpoint of energy saving because the dehydrogenation is integrated into the sintering process. In this study, TiH2 raw powders were directly consolidated by conventional press technique at 600 MPa to prepare TiH2 powder compacted billets. To thermally decompose TiH2 and obtain sintered pure Ti billets, the TiH2 powder billets were heated in the integrated sintering process including dehydrogenation. The hot-extruded pure Ti material, which was heat treated at 1273 K for 180 min in argon gas atmosphere, showed tensile strength of 701.8 MPa and elongation of 27.1%. These tensile properties satisfied the requirements for JIS Ti Grade 4. The relationship between microstructures, mechanical properties response and heat treatment

  10. Tecnologias da Informação e Serviço Social: notas iniciais sobre o seu potencial estratégico para o exercício profissional (Information Technology and Social Work: notes on the strategic potential of the it for the professional

    Directory of Open Access Journals (Sweden)

    Renato dos Santos Veloso

    2010-01-01

    Full Text Available Resumo: O presente artigo tem por objetivo apresentar algumas notas iniciais que possam subsidiar a discussão a respeito do potencial das tecnologias da informação (TI para os processos de trabalho em que se inserem os assistentes sociais, sustentando que tal recurso pode promover alterações qualitativas no exercício profissional. Entendendo a tecnologia como produto do trabalho social, são tecidos alguns comentários críticos a respeito da sua utilização hegemônica no capitalismo, sua relação com a racionalidade instrumental e seu potencial para o aprofundamento do projeto ético-político profissional do Serviço Social. Sustenta-se o caráter estratégico que as TI podem ter para o exercício profissional, ressaltando-se que sua adequada apropriação demanda a existência prévia de algumas condições básicas, dentre as quais se destaca uma formação profissional em que se problematize o tema de maneira consistente e crítica. Dessa forma, a partir do debate crítico sobre a temática, tanto no campo das ciências sociais quanto no Serviço Social, defende-se a incorporação desse recurso de forma subordinada aos princípios e valores existentes no projeto ético-político profissional, visando evitar uma utilização pautada na lógica da racionalidade instrumental, em que o tecnicismo se sobrepõe à competência crítica. Abstract: The present article aims at introducing some notes that could serve as basis for the discussion about the potential of the Information Technology (IT for the work processes in which social workers are inserted, arguing that such a resource could promote qualitative changes in the professional practice. Understanding technology as a product of the work developed by the society as a whole, this article criticizes its hegemonic use in the capitalist system, while also analyzing its relationship with instrumental rationality and its potential for the improvement of Social Work’s ethical

  11. TiC reinforced cast Cr steels

    Energy Technology Data Exchange (ETDEWEB)

    Dogan, O.N.; Hawk, J.A.; Schrems, K.K.

    2006-06-01

    A new class of materials, namely TiC-reinforced cast chromium (Cr) steels, was developed for applications requiring high abrasion resistance and good fracture toughness. The research approach was to modify the carbide structure of commercial AISI 440C steel for better fracture resistance while maintaining the already high abrasion resistance. The new alloys contained 12Cr, 2.5–4.5Ti, and 1–1.5C (wt.%) and were melted in a vacuum induction furnace. Their microstructure was composed primarily of a martensitic matrix with a dispersion of TiC precipitates. Modification of TiC morphology was accomplished through changing the cooling rate during solidification. Wear rates of the TiC-reinforced Cr steels were comparable to that of AISI 440C steel, but the impact resistance was much improved.

  12. TiC-reinforced cast Cr steels

    Science.gov (United States)

    Doğan, Ö. N.; Hawk, J. A.; Schrems, K. K.

    2006-06-01

    A new class of materials, namely TiC-reinforced cast chromium (Cr) steels, was developed for applications requiring high abrasion resistance and good fracture toughness. The research approach was to modify the carbide structure of commercial AISI 440C steel for better fracture resistance while maintaining the already high abrasion resistance. The new alloys contained 12Cr, 2.5-4.5Ti, and 1-1.5C (wt.%) and were melted in a vacuum induction furnace. Their microstructure was composed primarily of a martensitic matrix with a dispersion of TiC precipitates. Modification of TiC morphology was accomplished through changing the cooling rate during solidification. Wear rates of the TiC-reinforced Cr steels were comparable to that of AISI 440C steel, but the impact resistance was much improved.

  13. Hydridation of Ti-6Al-4V

    International Nuclear Information System (INIS)

    Domizzi, G; Luppo, M.I; Ortiz, M; Vigna, G

    2004-01-01

    The production of Ti pieces or their alloys through powder metallurgy is an economical alternative that replaces the costly methods commonly used. The Ti-6AI-4V alloy is widely used in the aerospace, chemical and medical industries. The use of powder from the alloy instead of using more pure alloyed titanium powders, further simplifies the production process. The presence of V allows the phase β to stabilize at very low temperatures and both alloys alter the Ti-H equilibrium diagram. This work analyzes to what degree these effects influence the obtaining of powders from this alloy from that of hydridation and dehydridation. Although it has slower kinetics, powders can be produced in times similar to those found for grade 2 Ti since the distribution of hydrides in the sample is uniform and the material is fragile enough for concentrations of approximately 0.7 H/Ti (CW)

  14. A mulher e o cancro do pulmão** Textos referentes à mesa-redonda com o mesmo título organizada pela Comissão de Trabalho de «Pneumologia Oncológica». Coimbra, 13 de Abril de 2002

    Directory of Open Access Journals (Sweden)

    E. Teixeira

    2003-05-01

    Full Text Available RESUMO: A epidemiologia do cancro do pulmão mudou em vários países nos últimos anos.No século XIX o cancro do pulmão era raro, mas a sua incidência aumentou drasticamente durante o século XX e é previsível que continue a aumentar no início do século XXI.Actualmente, as taxas de incidência e mortalidade do cancro do pulmão são maiores nos países desenvolvidos, especialmente EUA e Europa, tendo-se verificado aumento de incidência na mulher. Estas diferenças geográficas e entre os sexos estão largamente relacionadas com os hábitos tabágicos.As mulheres começam a fumar mais precocemente e têm mais dificuldade na desabituação tabágica, por problemas relacionados com o controlo de peso; apresentam uma susceptibilidade maior aos carcinogéneos, tendo um risco de cancro do pulmão 1,5 vezes superior ao homem com os mesmos hábitos tabágicos. O adenocarcinoma é o tipo histológico mais frequente nos jovens, nas mulheres em todas as idades e nos não fumadores.Vários factores desde tabaco, poluição doméstica e profissional, nutricional doenças associadas, até factores genéticos e hormonais, têm sido investigados no sentido de definir a sua influência no desenvolvimento de cancro do pulmão na mulher.Quem trata este tipo de patologia vê-se ainda confrontado com inúmeras questões que se relacionam com a sua especificidade do sexo feminino. A literatura sobre este tema é no entanto vaga.REV PORT PNEUMOL 2003; IX (3: 225-247 ABSTRACT: The epidemiology of lung cancer has changed in the last years in several countries all over the world. In the 19th century, the lung cancer was rare but it incidence increase drastically during the 20th century, and the tendency is to continue in the 20th century. Actually the lung cancer’s incidence and mortality are higher in the developed countries, especially in Europe and Unites

  15. A united refinement technology for commercial pure Al by Al-10Ti and Al-Ti-C master alloys

    Energy Technology Data Exchange (ETDEWEB)

    Ma Xiaoguang [Key Laboratory of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, Jinan 250061 (China); Liu Xiangfa [Key Laboratory of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, Jinan 250061 (China)], E-mail: xfliu@sdu.edu.cn; Ding Haimin [Key Laboratory of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, Jinan 250061 (China)

    2009-03-05

    Because flake-like TiAl{sub 3} particles in Al-Ti-C master alloys prepared in a melt reaction method dissolve slowly when they are added into Al melt at 720 deg. C, Ti atoms cannot be released rapidly to play the assistant role of grain refinement, leading to a poor refinement efficiency of Al-Ti-C master alloys. A united refinement technology by Al-10Ti and Al-Ti-C master alloys was put forward in this paper. The rational combination of fine blocky TiAl{sub 3} particles in Al-10Ti and TiC particles in Al-Ti-C can improve the nucleation rate of {alpha}-Al. It not only improves the grain refinement efficiency of Al-Ti-C master alloys, but also reduces the consumption.

  16. A united refinement technology for commercial pure Al by Al-10Ti and Al-Ti-C master alloys

    International Nuclear Information System (INIS)

    Ma Xiaoguang; Liu Xiangfa; Ding Haimin

    2009-01-01

    Because flake-like TiAl 3 particles in Al-Ti-C master alloys prepared in a melt reaction method dissolve slowly when they are added into Al melt at 720 deg. C, Ti atoms cannot be released rapidly to play the assistant role of grain refinement, leading to a poor refinement efficiency of Al-Ti-C master alloys. A united refinement technology by Al-10Ti and Al-Ti-C master alloys was put forward in this paper. The rational combination of fine blocky TiAl 3 particles in Al-10Ti and TiC particles in Al-Ti-C can improve the nucleation rate of α-Al. It not only improves the grain refinement efficiency of Al-Ti-C master alloys, but also reduces the consumption

  17. Autoridad y Transmisión: Algunas notas teóricas para re-pensar la educación

    Directory of Open Access Journals (Sweden)

    Gabriela Diker

    2015-10-01

    Full Text Available El objetivo de este ensayo es reflexionar sobre el tema de la autoridad y la transmisión en los espacios de formación, lo que se convierte en unas notas teóricas para repensar la educación, como la acción pedagógica y el compromiso existente en estos espacios para luchas contra formas autoritarias que impiden un pensar con autonomía. Se busca analizar esta relación de manera crítica desde los discursos ideológicos que se producen para el abordaje de estas categorías, a fin de contribuir con este pensar. El ensayo da cuenta desde lo cotidiano de la escuela, el tema de la autoridad en su relación con la transmisión, lo que conduce a recibir una atención permanente por parte de la comunidad académica como objeto de investigación. La autoridad escolar, producida a partir de las experiencias históricas escolares, se viene asumiendo como tal debido a la manera intensa y conflictiva dentro de los espacios de formación, siendo, que este problema, reproduce mecánicamente formas excluyentes y reduccionistas por parte de la autoridad docente. AbstractThis essay is made in order to reflect about the authority and transmission within formation sceneries, which becomes into some theoretical notes to rethink education, such as the pedagogical action and the current commitment in these sceneries to fight against authoritary forms which prevent autonomy thinking. The idea is to look for this relationship in a critical way from the ideological speeches which are produced to approach these categories in order to contribute with this way of thinking. The essay talks about from the daily routine at school, the topic of authority and its relationship with the transmission, which makes it to receive permanent attention from the academic community as a research focus. School authority, produced from the historical scholar experiences, is being taken in that way, due to the intense and conflictive way within the formation sceneries, as

  18. Relaciones entre la nota de egreso de los titulados universitarios y su inserción laboral Relationships between University graduates' marks and their labour outcomes.

    Directory of Open Access Journals (Sweden)

    Luis A. García

    2009-10-01

    Full Text Available

    Son muchos los factores que están involucrados en la toma de decisiones de los egresados universitarios a la hora de construir su propio itinerario formativo y laboral, siendo la nota de egreso un elemento a considerar. En el presente trabajo se aborda el posible papel de este aspecto como mediador en dicho proceso, analizando las relaciones que presenta dicha variable con la participación en programas de formación de postgrado y la dilación en la incorporación al mercado de trabajo. La población de estudio está compuesta por 15.360 egresados universitarios que finalizaron su titulación en la Universidad de La Laguna entre los años 2002 y 2007. Los resultados obtenidos indican que, generalmente, los egresados con que participan en programas de formación de postgrado y quienes invierten más tiempo en incorporarse al mercado de trabajo han obtenido mejores calificaciones académicas. En este sentido, algunas titulaciones de Ciencias de la Salud como Medicina o Fisioterapia se comportan en sentido inverso, pudiendo deberse esto a los mecanismos específicos de incorporación de candidatos con los que cuenta el sistema sanitario.


    Palabras clave: Inserción laboral, expediente académico, formación de postgrado.

    There are many different factors involved on university graduates’ decision making about their own careers after graduation, being university grades a main element to be considered. University grades’ hypothetical role as mediator on this process and relationships between this variable, invested time to obtain a job and involvement on postgraduate programs are analyzed on this study. Researched population consists of 15.360 graduates who finished their degrees between 2002 and 2007 in La Laguna’s University. Data shows graduates who are involved on postgraduate programs and those who invest more time to obtain a job usually had better grades. However, results are different on some

  19. Deformation twinning in metals and ordered intermetallics-Ti and Ti-aluminides

    Science.gov (United States)

    Yoo, M. H.; Fu, C. L.; Lee, J. K.

    1991-06-01

    The role of deformation twinning in the strength and ductility of metals and ordered intermetallic alloys is examined on the basis of crystallography, energetics and kinetics of deformation twinning. A systematic analysis is made by taking Ti, Ti3AI, TiAl, and A13Ti as four model systems. In comparison with profuse twinning in Ti, the intrinsic difficulty of twinning in Ti3A1 is rationalized in terms of the interchange shuffling mechanism. A fault (SISF) dragging mechanism based on the interaction torque explains the physical source for the low mobility of screw superdislocations in TiAl, which may lead to (111) [ 11bar{2}] twin nucleation. In TiAl and A13Ti alloys, the twin-slip (ordinary) conjugate relationship makes an important contribution to the strain compatibility for high-temperature plasticity. Potentially beneficial alloying additions to promote twinning are discussed. Les conséquences de la déformation par maclage sur la fracture et la ductilité des métaux et alliages intermétalliques ordonnés sont étudiées en fonction de la cristallographie, de l'énergie et de la cinétique des déformations par maclage. Une analyse systématique a été faite en considérant Ti, Ti3AI, TiAl et A13Ti comme quatre systèmes modèles. En comparaison avec le nombre important de maclages observés dans Ti, la difficulté intrinsèque des maclages dans Ti3AI est rationalisée en terme de mécanisme d'“interchange shuffling”. Un mécanisme de “dragging fault” basé sur l'interaction “torque” explique l'origine physique de la faible mobilité des superdislocations vissées dans TiAl qui peuvent conduire à la nucléation des macles (111) 112. Dans les alliages tels TiAl et A13Ti, la relation conjuguée entre la macle et le glissement (ordinaire) contribue de façon importante à la compatibilité des contraintes lors de la déformation plastique à haute température. Des effets bénéfiques potentiels liés à des éléments d'addition sur le processus

  20. Characterisation and behaviour of Ti/TiO2/noble metal anodes

    International Nuclear Information System (INIS)

    Gueneau de Mussy, Jean-Paul; Macpherson, Julie V.; Delplancke, Jean-Luc

    2003-01-01

    The morphology, composition and the electrical and electrochemical behaviour of the anodic microporous layer, prepared by the galvanostatic anodisation of Ti after sparking, followed by galvanostatic deposition of Pt or Ir have been investigated. These electrodes are proposed to function as dimensionally stable anodes (DSAs). For Ti/TiO 2 /Pt electrodes, Pt is deposited within some of the micropores of the oxide film. In contrast, for Ti/TiO 2 /Ir, the metal is deposited preferentially on the top surface. This difference is thought to result from the position of the metal deposition potential with respect to the flat band potential of n-TiO 2 . Optical imaging of both types of DSA suggests that only a few sites on the surface are responsible for electron exchange at the DSA-electrolyte interface. C-AFM measurements of Ti/TiO 2 /Pt samples subjected to long-term anodic polarisation, suggest that the Ti-noble metal contact is progressively insulated by thickening of the TiO 2 barrier layer, promoting passivation of the DSA. For Ir coated anodes, catalytic activity is directly related to the presence of Ir and to the stability of the catalytic oxide layer. Under Cu electrowinning conditions, the electrochemically formed hydrated Ir oxide was found to be catalytically less stable, than the iridium oxide film subjected to a heat treatment

  1. Improved tribological properties of TiC with porous nanostructured TiO2 intermediate layer

    International Nuclear Information System (INIS)

    Shanaghi, Ali; Ahangarani, Shahrokh; Sabour Rouhaghdam, Ali Reza; Chu, Paul K.

    2011-01-01

    Highlights: ► The porous TiO 2 nanoparticle coating is deposited as an intermediate layer on steel. ► A homogenous and low friction TiC nanostructure coating is deposited by plasma CVD. ► Intermediate layer can be determined the nucleation and growth of the TiC coating. ► The porous interlayer improves the friction and wear of the TiC nanostructure coating. - Abstract: The mismatch in the thermal expansion coefficients between TiC coatings and steel substrates and residual stress in the TiC degrade the tribological properties. In this work, a porous nanostructured TiO 2 coating is deposited as an intermediate layer on hot-work steel (H 11 ) before final deposition of the TiC film. This intermediate layer is expected to reduce the interfacial energy, decreases the thermal mismatch between TiC and steel, and improves the tribological properties. Grazing incidence X-ray diffraction (GIXRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), atomic force microscopy (AFM), and pin-on-disk are used to study the structure as well as tribological properties such as friction, wear, and hardness. Our results reveal that the porous TiO 2 interlayer improves the friction, wear, hardness, and elastic modulus of the system.

  2. Early stages of the mechanical alloying of TiC–TiN powder mixtures

    International Nuclear Information System (INIS)

    Mura, Giovanna; Musu, Elodia; Delogu, Francesco

    2013-01-01

    The present work focuses on the alloying behavior of TiC–TiN powder mixtures submitted to mechanical processing by ball milling. Accurate X-ray diffraction analyses indicate a progressive modification of the unit cell parameters of the TiC and TiN phases, suggesting the formation of TiC- and TiN-rich solid solutions with an increasingly larger content of solutes. Once the discrete character of the mechanical treatment is taken into due account, the smooth change of the unit cell parameters can be explained by a sequence of mutual dissolution stages related to individual collisions. At each collision, the average chemical composition of small amounts of TiC- and TiN-rich phases changes discontinuously. The discontinuous changes can be tentatively ascribed to local mass transport processes activated by the mechanical deformation of powders at collisions. -- Highlights: ► Mechanically processed TiC–TiN powder mixtures form two solid solutions. ► An analytical model was developed to describe the mechanical alloying kinetics. ► The amount of powder alloyed at collision was indirectly estimated. ► A few nanomoles of material participate in the alloying process at each collision. ► The chemical composition of the solid solutions was shown to change discontinuously.

  3. Early stages of the mechanical alloying of TiC-TiN powder mixtures

    Energy Technology Data Exchange (ETDEWEB)

    Mura, Giovanna [Dipartimento di Ingegneria Elettrica ed Elettronica, Universita degli Studi di Cagliari, via Marengo 2, 09123 Cagliari (Italy); Musu, Elodia [Industrial Telemicroscopy Laboratory, Sardegna Ricerche, Polaris, Technology Park of Sardinia, Edificio 3, Loc. Piscinamanna, 09010 Pula (Italy); Delogu, Francesco, E-mail: francesco.delogu@dimcm.unica.it [Dipartimento di Ingegneria Meccanica, Chimica, e dei Materiali, Universita degli Studi di Cagliari, via Marengo 2, I-09123 Cagliari (Italy)

    2013-01-15

    The present work focuses on the alloying behavior of TiC-TiN powder mixtures submitted to mechanical processing by ball milling. Accurate X-ray diffraction analyses indicate a progressive modification of the unit cell parameters of the TiC and TiN phases, suggesting the formation of TiC- and TiN-rich solid solutions with an increasingly larger content of solutes. Once the discrete character of the mechanical treatment is taken into due account, the smooth change of the unit cell parameters can be explained by a sequence of mutual dissolution stages related to individual collisions. At each collision, the average chemical composition of small amounts of TiC- and TiN-rich phases changes discontinuously. The discontinuous changes can be tentatively ascribed to local mass transport processes activated by the mechanical deformation of powders at collisions. -- Highlights: Black-Right-Pointing-Pointer Mechanically processed TiC-TiN powder mixtures form two solid solutions. Black-Right-Pointing-Pointer An analytical model was developed to describe the mechanical alloying kinetics. Black-Right-Pointing-Pointer The amount of powder alloyed at collision was indirectly estimated. Black-Right-Pointing-Pointer A few nanomoles of material participate in the alloying process at each collision. Black-Right-Pointing-Pointer The chemical composition of the solid solutions was shown to change discontinuously.

  4. Fabrication of steel matrix composites locally reinforced with different ratios of TiC/TiB2 particulates using SHS reactions of Ni-Ti-B4C and Ni-Ti-B4C-C systems during casting

    International Nuclear Information System (INIS)

    Yang Yafeng; Wang Huiyuan; Liang Yunhong; Zhao Ruyi; Jiang Qichuan

    2007-01-01

    Steel matrix composites locally reinforced with different molar ratios of in situ TiC/TiB 2 particulates (2:1, 1:1 and 1:2, respectively) have been fabricated successfully utilizing the self-propagating high-temperature synthesis (SHS) reactions of Ni-Ti-B 4 C and Ni-Ti-B 4 C-C systems during casting. Differential thermal analysis (DTA) and X-ray diffraction (XRD) results reveal that the exothermic reactions of the Ni-Ti-B 4 C and Ni-Ti-B 4 C-C systems proceed in such a way that Ni initially reacts with B 4 C and Ti to form Ni 2 B and Ti 2 Ni compounds, respectively, with heat evolution at 1037 deg. C; Subsequently, the external heat and the evolved heat from these exothermic reactions promote the reactions forming TiC and TiB 2 at 1133 deg. C. In the composites reinforced with 1:2 molar ratio of TiC/TiB 2 , almost all TiB 2 grains have clubbed structures, while TiC grains exhibit near-spherical morphologies. Furthermore, TiB 2 grain sizes decrease, with the increase of TiC content. In particular, in the composites reinforced with 2:1 molar ratio of TiC/TiB 2 , it is difficult to find the clubbed TiB 2 grains. Macro-pores and blowholes are absent in the local reinforcing region of the composites reinforced with 1:1 and 1:2 molar ratios of TiC/TiB 2 , while a few macro-pores can be observed in the composite reinforced with 2:1 molar ratio of TiC/TiB 2 . Moreover, the densities of the composites reinforced with 1:1 and 1:2 molar ratios of TiC/TiB 2 are higher than that of the composite reinforced with 2:1 molar ratio of TiC/TiB 2 . The composite reinforced with 1:2 molar ratio of TiC/TiB 2 has the highest hardness and the best wear resistance

  5. Dielectric enhancement of BaTiO3/SrTiO3 superlattices with embedded Ni nanocrystals

    International Nuclear Information System (INIS)

    Xiong Zhengwei; Sun Weiguo; Wang Xuemin; Jiang Fan; Wu Weidong

    2012-01-01

    Highlights: ► The BaTiO 3 /SrTiO 3 superlattices with embedded Ni NCs were successfully fabricated by L-MBE. ► The influence with the various concentrations of Ni nanocrystals embedded in BaTiO 3 /SrTiO 3 superlattices was also discussed. ► The BaTiO 3 /SrTiO 3 superlattices with lower concentration of embedded Ni NCs had higher permittivity and dielectric loss compared with the pure BaTiO 3 /SrTiO 3 superlattices. ► The dielectric enhancement of BaTiO 3 /SrTiO 3 superlattices with embedded Ni NCs was proposed to explained by Drude quasi-free-electron theory. - Abstract: The self-organized Ni nanocrystals (NCs) were embedded in BaTiO 3 /SrTiO 3 superlattices using laser molecular beam epitaxy (L-MBE). The stress of the composite films was increased with the increasing concentration of embedded Ni NCs, as investigation in stress calculation. The influence with the various concentrations of Ni NCs embedded in BaTiO 3 /SrTiO 3 superlattices was also discussed. The internal stress of the films was too strong to epitaxial growth of BaTiO 3 /SrTiO 3 superlattices. Compared with the pure BaTiO 3 /SrTiO 3 superlattices, the BaTiO 3 /SrTiO 3 superlattices with lower concentration of embedded Ni NCs had higher permittivity and dielectric loss. Furthermore, the dielectric enhancement of BaTiO 3 /SrTiO 3 superlattices with embedded Ni NCs was proposed to explained by Drude quasi-free-electron theory.

  6. Phase Constituents and Microstructure of Ti3Al/Fe3Al + TiN/TiB2 Composite Coating on Titanium Alloy

    Science.gov (United States)

    Li, Jianing; Chen, Chuanzhong; Zhang, Cuifang

    Laser cladding of the Fe3Al + B4C/TiN + Al2O3 pre-placed powders on the Ti-6Al-4V alloy can form the Ti3Al/Fe3Al + TiN/TiB2 composite coating, which improved the wear resistance of the Ti-6Al-4V alloy surface. In this study, the Ti3Al/Fe3Al + TiN/TiB2 composite coating has been researched by means of X-ray diffraction and scanning electron microscope. It was found that during the laser cladding process, Al2O3 can react with TiB2, leading to the formations of Ti3Al and B. This principle can be used to improve the Fe3Al + B4C/TiN laser-cladded coating on the Ti-6Al-4V alloy. Furthermore, during the cladding process, C consumed the oxygen in Fe3Al + B4C /TiN + Al2O3 molten pool, which retarded the productions of the redundant metal oxides.

  7. Solid solution cermet: (Ti,Nb)(CN)-Ni cermet.

    Science.gov (United States)

    Kwon, Hanjung; Jung, Sun-A

    2014-11-01

    Solid solution powders without W, (Ti,Nb)(CN) powders with a B1 structure (NaCl like), were synthesized by high energy milling and carbothermal reduction in nitrogen. The range of molar ratios of Ti/Nb for forming complete (Ti,Nb)(CN) phase was broader than that of Ti/W for the (Ti,W)(CN) phase because carbide or carbonitride of Nb had a B1 crystal structure identical to Ti(CN) while WC had a hexagonal crystal structure. The results revealed that the hardness of (Ti,Nb)(CN)-Ni cermets was higher than that of (Ti,W)(CN)-Ni cermets. The lower density of the (Ti,Nb)(CN) powder contributed to the higher hardness compared to (Ti,W)(CN) because the volumetric ratio of (Ti,Nb)(CN) in the (Ti,Nb)(CN)-Ni cermets was higher than that of (Ti,Nb)(CN) in the (Ti,W)(CN)-Ni cermets at the same weight ratio of Ni. Additionally, it was assumed that intrinsic the properties of (Ti,Nb)(CN) could also be the cause for the high hardness of the (Ti,Nb)(CN)-Ni cermets.

  8. Constitution of the ternary system Cr–Ni–Ti

    International Nuclear Information System (INIS)

    Krendelsberger, Natalja; Weitzer, Franz; Du, Yong; Schuster, Julius C.

    2013-01-01

    Highlights: •Reaction scheme and liquidus surface for Cr-Ni-Ti are given. •In the ternary the C14-type Laves phase coexists with the liquid phase. •Two ternary eutectics are identified. -- Abstract: The nature of solid–liquid phase equilibria in the ternary system Cr–Ni–Ti was investigated using electron microscopy, energy dispersive spectroscopy, X-ray diffraction, and differential thermal analysis. Literature data on solid state phase equilibria are confirmed. The Cr 2 Ti Laves phase modifications coexisting with Ni–Ti phases are clarified to be hexagonal C14-type and cubic C15-type. The C14-type Laves phase γCr 2 Ti is found to coexist with the liquid phase. It forms in the pseudobinary peritectic reaction p max1 from L + β(Cr,Ti) at 1389 °C. On further cooling γCr 2 Ti + NiTi solidify at 1202 °C in the pseudobinary eutectic e max2 . In the Cr-rich part of the system ternary eutectics occur at 1216 °C (E 1 : L = Ni 3 Ti + (Ni) + β(Cr,Ti)) and 1100 °C (E 2 : L = NiTi + Ni 3 Ti + β(Cr,Ti)), respectively. No ternary eutectic is found in the Ti-rich part. Rather the eutectic trough ends in the binary eutectic L = NiTi 2 + β(Ti)

  9. Fabrication of graphene–TiO2 nanocomposite with improved ...

    Indian Academy of Sciences (India)

    carbon nanocomposite material shows high photocatalytic activity compared with the bare TiO2. However, TiO2 has a high band gap (3.2 eV) and absorb little amount of solar ... tion of titanium dioxide (TiO2)–graphene (GR) (TiO2–GR).

  10. Por que se faz políticas sociais no Brasil?: notas sobre estratégias de legitimação nos últimos dois governos federais

    Directory of Open Access Journals (Sweden)

    Sobottka, Emil Albert

    2006-01-01

    Full Text Available As reformas de orientação meoliberal que foram implementadas no Brasil na década de 1990 afetaram profundamente as políticas sociais, mas as mudanças foram justificadas como reforma do estado e não das políticas. Seu escopo era a despolitização da administração pública. O governo de orientação social-democrata de Lula da Silva que se seguiu buscou legitimar sua política social priorizando a criação de alguns espaços de participação da sociedade numa esfera pública - mas sem alcançar o efeito dos governos locais do mesmo partido. Por isso o presente texto se propõe a enfocar as mudanças institucionais que afetam aquela política propostas pelos últimos dois governos enquanto substitutos de uma fundamentação discursiva de projetos distintos de reforma

  11. Por que se faz políticas sociais no Brasil?: notas sobre estratégias de legitimação nos últimos dois governos federais

    Directory of Open Access Journals (Sweden)

    Sobottka, Emil Albert

    2006-01-01

    Full Text Available As reformas de orientação meoliberal que foram implementadas no Brasil na década de 1990 afetaram profundamente as políticas sociais, mas as mudanças foram justificadas como reforma do estado e não das políticas. Seu escopo era a despolitização da administração pública. O governo de orientação social-democrata de Lula da Silva que se seguiu buscou legitimar sua política social priorizando a criação de alguns espaços de participação da sociedade numa esfera pública - mas sem alcançar o efeito dos governos locais do mesmo partido. Por isso o presente texto se propõe a enfocar as mudanças institucionais que afetam aquela política propostas pelos últimos dois governos enquanto substitutos de uma fundamentação discursiva de projetos distintos de reforma.

  12. Grindability of cast Ti-Cu alloys.

    Science.gov (United States)

    Kikuchi, Masafumi; Takada, Yukyo; Kiyosue, Seigo; Yoda, Masanobu; Woldu, Margaret; Cai, Zhuo; Okuno, Osamu; Okabe, Toru

    2003-07-01

    The purpose of the present study was to evaluate the grindability of a series of cast Ti-Cu alloys in order to develop a titanium alloy with better grindability than commercially pure titanium (CP Ti), which is considered to be one of the most difficult metals to machine. Experimental Ti-Cu alloys (0.5, 1.0, 2.0, 5.0, and 10.0 mass% Cu) were made in an argon-arc melting furnace. Each alloy was cast into a magnesia mold using a centrifugal casting machine. Cast alloy slabs (3.5 mm x 8.5 mm x 30.5 mm), from which the hardened surface layer (250 microm) was removed, were ground using a SiC abrasive wheel on an electric handpiece at four circumferential speeds (500, 750, 1000, or 1250 m/min) at 0.98 N (100 gf). Grindability was evaluated by measuring the amount of metal volume removed after grinding for 1min. Data were compared to those for CP Ti and Ti-6Al-4V. For all speeds, Ti-10% Cu alloy exhibited the highest grindability. For the Ti-Cu alloys with a Cu content of 2% or less, the highest grindability corresponded to an intermediate speed. It was observed that the grindability increased with an increase in the Cu concentration compared to CP Ti, particularly for the 5 or 10% Cu alloys at a circumferential speed of 1000 m/min or above. By alloying with copper, the cast titanium exhibited better grindability at high speed. The continuous precipitation of Ti(2)Cu among the alpha-matrix grains made this material less ductile and facilitated more effective grinding because small broken segments more readily formed.

  13. New developments in Ni/Ti multilayers

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, I; Hoghoj, P [Institut Max von Laue - Paul Langevin (ILL), 38 - Grenoble (France)

    1997-04-01

    It is now 20 years since super-mirrors were first used as a neutron optical element. Since then the field of multilayer neutron-optics has matured with multilayers finding their way to application in many neutron scattering instruments. However, there is still room for progress in terms of multilayer quality, performance and application. Along with work on multilayers for neutron polarisation Ni/Ti super-mirrors have been optimised. The state-of-the-art Ni/Ti super-mirror performance and the results obtained in two neutron-optics applications of Ni/Ti multilayers are presented. (author).

  14. U diffusion in Ti

    International Nuclear Information System (INIS)

    Gordillo, J.; Perez, R.A.; Di Lalla, N.

    2012-01-01

    The spectrometry was used to measure the diffusion of u in Ti-α in the range of temperatures from 863 to 1123 k (590-850 o C). The diffusion parameters found Q = 294 kj / mol and D o = 4x10 -3 m2 / s are similar to obtained for the self-diffusion in Ti-? measured using a base material containing impurities like this work. This is consistent with the hypothesis that u diffuses via a vacancy mechanism in the grid of Ti-α and it contrasted with older results, in which the activation energy is significantly lower and incompatible with said diffusion mechanism (author)

  15. Review of the Methods for Production of Spherical Ti and Ti Alloy Powder

    Science.gov (United States)

    Sun, Pei; Fang, Zhigang Zak; Zhang, Ying; Xia, Yang

    2017-10-01

    Spherical titanium alloy powder is an important raw material for near-net-shape fabrication via a powder metallurgy (PM) manufacturing route, as well as feedstock for powder injection molding, and additive manufacturing (AM). Nevertheless, the cost of Ti powder including spherical Ti alloy has been a major hurdle that prevented PM Ti from being adopted for a wide range of applications. Especially with the increasing importance of powder-bed based AM technologies, the demand for spherical Ti powder has brought renewed attention on properties and cost, as well as on powder-producing processes. The performance of Ti components manufactured from powder has a strong dependence on the quality of powder, and it is therefore crucial to understand the properties and production methods of powder. This article aims to provide a cursory review of the basic techniques of commercial and emerging methods for making spherical Ti powder. The advantages as well as limitations of different methods are discussed.

  16. Sulfide phase in the Fe-Ti-S and Fe-C-Ti-S alloys

    International Nuclear Information System (INIS)

    Malinochka, Ya.N.; Balakina, N.A.; Shmelev, Yu.S.

    1976-01-01

    The nature of the sulfide phases in Fe-Ti-S and Fe-C-Ti-S alloys was studied. The carbide and the sulfide phase were identified the aid of X-ray spectral microanalysis. It was established that for a small content of titanium and sulfur in ternary Fe-Ti-S alloys the solidification of the γ-solution on the boundaries of dendritic branches is accompanied, along with the precipitation of a sulfide rich in iron of the (Fe, Ti) S type where a small quantity of titanium is dissolved, by the formation of a titanium-bearing sulfide eutectic γ + TiS. The amount of the sulfide eutectic increases with the contents of titanium and sulfur until a purely eutectic alloy is formed. Both carbides and sulfides may be formed in the solidification of quaternary alloys Fe-C-Ti-S

  17. Composition powders of the system TiC-TiB2

    International Nuclear Information System (INIS)

    Degrave, I.E.; Udalov, Yu.P.

    2000-01-01

    The ceramic composition on TiC-TiB 2 base is proposed for substitution of scarce and expensive tungsten carbide for manufacturing metallo-ceramic articles. The technology of TiC and TiB 2 powder production from the mixture of oxides and carbon-bearing reducing agents is developed. Saccharose is recommended to be used as a reductant. Carbon tetrachloride vapors are introduced into the reaction volume to accelerate the synthesis. The purification of the product from residual carbon is performed in high frequency glow discharge with the use of air as a plasma forming gas. Microstructural studies show that the product obtained constitutes submicron TiC particles in a TiB 2 matrix [ru

  18. A study of the structural stability of TiC, TiN and TiO in the pressure range up to 65 GPa using synchrotron radiation

    International Nuclear Information System (INIS)

    Noerlund Christensen, A.; Gerward, L.; Staun Olsen, J.; Steenstrup, S.

    1990-01-01

    Structural phase transformations in TiC, TiN and TiO could possibly occur at high pressure because of the non-stoichiometric nature of these compounds. The NaCl structure could then possibly transform to the CsCl structure, in which case the coordination number would increase from six to eight. This is in agreement with the general rule that the coordination number increases with pressure. The present work was undertaken in order to investigate possible structural phase transformations in TiC, TiN and TiO in the pressure range up to 65 GPa (=650 kbar). (orig.)

  19. A study of TiB2/TiB gradient coating by laser cladding on titanium alloy

    Science.gov (United States)

    Lin, Yinghua; Lei, Yongping; Li, Xueqiao; Zhi, Xiaohui; Fu, Hanguang

    2016-07-01

    TiB2/TiB gradient coating has been fabricated by a laser cladding technique on the surface of a Ti-6Al-4V substrate using TiB2 powder as the cladding material. The microstructure and mechanical properties of the gradient coating were analyzed by SEM, EPMA, XRD, TEM and an instrument to measure hardness. With the increasing distance from the coating surface, the content of TiB2 particles gradually decreased, but the content of TiB short fibers gradually increased. Meanwhile, the micro-hardness and the elastic modulus of the TiB2/TiB coating showed a gradient decreasing trend, but the fracture toughness showed a gradient increasing trend. The fracture toughness of the TiB2/TiB coating between the center and the bottom was improved, primarily due to the debonding of TiB2 particles and the high fracture of TiB short fibers, and the fracture position of TiB short fiber can be moved to an adjacent position. However, the debonding of TiB2 particles was difficult to achieve at the surface of the TiB2/TiB coating.

  20. Experimental and theoretical studies on X-ray induced secondary electron yields in Ti and TiO2

    International Nuclear Information System (INIS)

    Iyasu, Takeshi; Tamura, Keiji; Shimizu, Ryuichi; Vlaicu, Mihai Aurel; Yoshikawa, Hideki

    2006-01-01

    Generation of X-ray induced secondary electrons in Ti and TiO 2 was studied from both experimental and theoretical approaches, using X-ray photoelectron spectroscopy (XPS) attached to a synchrotron radiation facility and Monte Carlo simulation, respectively. The experiment revealed that the yields of secondary electrons induced by X-rays (electrons/photon) at photon energies to 4950 and 5000eV for Ti and TiO 2 are δ Ti (4950eV)=0.002 and δ Ti (5000eV)=0.014 while those for TiO 2 are δ TiO 2 (4950eV)=0.003 and δ TiO 2 (5000eV)=0.018. A novel approach to obtain the escape depth of secondary electrons has been proposed and applied to Ti and TiO 2 . The approach agreed very well with the experimental data reported so far. The Monte Carlo simulation predicted; δ Ti * (4950eV)=0.002 and δ Ti * (5000eV)=0.011 while δ TiO 2 * (4950eV)=0.003 and δ TiO 2 * (5000eV)=0.015. An experimental examination on the contribution of X-ray induced secondary electrons to photocatalysis in TiO 2 has also been proposed

  1. Active Ti Species in TiCl3-Doped NaAlH4. Mechanism for Catalyst Deactivation

    NARCIS (Netherlands)

    Balde, C.P.; Stil, H.A.; van der Eerden, A.M.J.; de Jong, K.P.; Bitter, J.H.

    2007-01-01

    The nature of the active Ti species in TiCl3-doped NaAlH4, a promising hydrogen storage material, was studied as a function of the desorption temperature with Ti K-edge extended X-ray absorption fine structure (EXAFS) spectroscopy, Ti K-edge X-ray absorption near-edge structure (XANES) spectroscopy,

  2. Aeronautical Cast Ti Alloy and Forming Technology Development

    OpenAIRE

    ZHANG Meijuan; NAN Hai; JU Zhongqiang; GAO Fuhui; QIE Xiwang; ZHU Langping

    2016-01-01

    The application and feature of Ti alloy and TiAl alloy for aviation at home and abroad were briefly introduced. According to the patent application status in Ti alloy field, the development of Ti alloy casting technology was analyzed in the recent thirty years, especially the transformation in aviation. Along with the development of aeronautional manufacturing technology and demand of high performance aircraft, Ti alloy casting is changing towards to be large, integral and complicated, and th...

  3. Sputter deposition and characterisation of hard wear-resistant Ti/TiN multilayers

    Energy Technology Data Exchange (ETDEWEB)

    Simmonds, M.C.; Swygenhoven, H. van [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1997-09-01

    Multilayered Ti/TiN thin films have been synthesized by magnetron sputter deposition. Alternating layers of Ti and TiN with layer thickness in the 5-50 nm range are sequentially deposited. The structure of the films have been characterised by atomic force microscopy (AFM), X-ray diffraction and reflection and Auger depth profiling. The mechanical properties have been investigated using pin-on-disc wear rate testing, nanoindentation determination of hardness and micro scratch testing. (author) 1 fig., 3 refs.

  4. Effect Of Ti Powder Addition On The Fabrication Of TiO2 Nanopowders

    Directory of Open Access Journals (Sweden)

    Raihanuzzaman R.M.

    2015-06-01

    Full Text Available Sintered samples of Ti added TiO2 nanopowders were fabricated by combined application of magnetic pulsed compaction (MPC and sintering. The effect of Ti nano powder on density, shrinkage and hardness of the samples were investigated as part of the study. The optimum processing conditions were found to be around 0.5 GPa MPC pressure and 1450°C sintering temperature, illustrating maximum density, hardness and minimum shrinkage. High pressure compaction using MPC was found to enhance density with increasing MPC pressure up to 0.9 GPa, and significantly reduce the total shrinkage (about 16% in this case in the sintered bulks compared to other general processes (about 18%. While sintered samples blended with micro Ti showed presence of microstructural cracks, the samples with 1-2% nano Ti had less or no cracks on them. Overall, the inclusion of nano Ti indicated improvement in mechanical properties of TiO2 nanopowders sintered preforms as opposed to micro Ti-added TiO2.

  5. Synchrotron diffraction studies of TiC/FeTi cermets obtained by SHS

    International Nuclear Information System (INIS)

    Contreras, L.; Turrillas, X.; Mas-Guindal, M.J.; Vaughan, G.B.M.; Kvick, A.; Rodriguez, M.A.

    2005-01-01

    TiC/FeTi composites have been obtained in situ by Self-propagating High-temperature Synthesis (SHS) of an intimate mixture of compacted powders of elemental carbon, titanium and iron. The reaction has been followed in real time by X-ray diffraction at the ESRF. The mechanism of the reaction is discussed in terms of the formation of a liquid phase corresponding to the eutectic of the Fe/Ti system prior to the TiC synthesis. Temperatures of reaction have been estimated by correlating thermal expansion coefficients with diffraction peaks shifts. The microstructures obtained by this method, suitable for cutting tools and wear resistant applications, are presented

  6. Effect of Mo2C content on the properties of TiC/TiB2 base cermets

    International Nuclear Information System (INIS)

    Takagi, Ken-ichi; Osada, Ken; Koike, Wataru; Fujima, Takuya

    2009-01-01

    The effects of Mo 2 C content on the microstructure and mechanical properties of TiC/TiB 2 base cermets were studied using the model cermets with the compositions of TiC/TiB 2 -(11-17)Mo 2 C-24Ni (mass%). TiC and TiB 2 ratio is set to molar ratio of 59:41 that is near quasi-eutectic composition. As a result, both transverse rupture strength and hardness of the cermets showed maxima for the cermet containing 13% Mo 2 C. The cermet achieved remarkable microstructural refinement and still maintained characteristic core-rim structure of the TiC base cermets. TiC/TiB 2 cermets, in addition to TiCN base cermets, are a good alternative material to cemented carbides.

  7. The Influence of a TiN Film on the Electronic Contribution to the Thermal Conductivity of a TiC Film in a TiN-TiC Layer System

    Science.gov (United States)

    Jagannadham, K.

    2018-01-01

    TiC and TiN films were deposited by reactive magnetron sputtering on Si substrates. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) characterization of the microstructure and interface structure have been carried out and the stoichiometric composition of TiC is determined. Thermal conductivity and interface thermal conductance between different layers in the films are evaluated by the transient thermo reflectance (TTR) and three-omega (3- ω) methods. The results showed that the thermal conductivity of the TiC films increased with temperature. The thermal conductivity of TiC in the absence of TiN is dominated by phonon contribution. The electronic contribution to the thermal conductivity of TiC in the presence of TiN is found to be more significant. The interface thermal conductance of the TiC/TiN interface is much larger than that of interfaces at Au/TiC, TiC/Si, or TiN/Si. The interface thermal conductance between TiC and TiN is reduced by the layer formed as a result of interdiffusion.

  8. Comparative evaluation of synthetic anti-HER2 Affibody molecules site-specifically labelled with {sup 111}In using N-terminal DOTA, NOTA and NODAGA chelators in mice bearing prostate cancer xenografts

    Energy Technology Data Exchange (ETDEWEB)

    Malmberg, Jennie; Varasteh, Zohreh; Orlova, Anna [Uppsala University, Preclinical PET Platform, Department of Medicinal Chemistry, Uppsala (Sweden); Perols, Anna; Braun, Alexis; Eriksson Karlstroem, Amelie [AlbaNova University Centre, Division of Molecular Biotechnology, School of Biotechnology, KTH Royal Institute of Technology, Stockholm (Sweden); Altai, Mohamed; Tolmachev, Vladimir [Uppsala University, Unit of Biomedical Radiation Sciences, Rudbeck Laboratory, Uppsala (Sweden); Sandstroem, Mattias [Uppsala University Hospital, Section of Medical Physics, Department of Oncology, Uppsala (Sweden); Garske, Ulrike [Uppsala University Hospital, Department of Medical Sciences, Section of Nuclear Medicine, Uppsala (Sweden)

    2012-03-15

    In disseminated prostate cancer, expression of human epidermal growth factor receptor type 2 (HER2) is one of the pathways to androgen independence. Radionuclide molecular imaging of HER2 expression in disseminated prostate cancer might identify patients for HER2-targeted therapy. Affibody molecules are small (7 kDa) targeting proteins with high potential as tracers for radionuclide imaging. The goal of this study was to develop an optimal Affibody-based tracer for visualization of HER2 expression in prostate cancer. A synthetic variant of the anti-HER2 Z{sub HER2:342} Affibody molecule, Z{sub HER2:S1}, was N-terminally conjugated with the chelators DOTA, NOTA and NODAGA. The conjugated proteins were biophysically characterized by electrospray ionization mass spectroscopy (ESI-MS), circular dichroism (CD) spectroscopy and surface plasmon resonance (SPR)-based biosensor analysis. After labelling with {sup 111}In, the biodistribution was assessed in normal mice and the two most promising conjugates were further evaluated for tumour targeting in mice bearing DU-145 prostate cancer xenografts. The HER2-binding equilibrium dissociation constants were 130, 140 and 90 pM for DOTA-Z{sub HER2:S1}, NOTA-Z{sub HER2:S1} and NODAGA-Z{sub HER2:S1}, respectively. A comparative study of {sup 111}In-labelled DOTA-Z{sub HER2:S1}, NOTA-Z{sub HER2:S1} and NODAGA-Z{sub HER2:S1} in normal mice demonstrated a substantial influence of the chelators on the biodistribution properties of the conjugates. {sup 111}In-NODAGA-Z{sub HER2:S1} had the most rapid clearance from blood and healthy tissues. {sup 111}In-NOTA-Z{sub HER2:S1} showed high hepatic uptake and was excluded from further evaluation. {sup 111}In-DOTA-Z{sub HER2:S1} and {sup 111}In-NODAGA-Z{sub HER2:S1} demonstrated specific uptake in DU-145 prostate cancer xenografts in nude mice. The tumour uptake of {sup 111}In-NODAGA-Z{sub HER2:S1}, 5.6 {+-} 0.4%ID/g, was significantly lower than the uptake of {sup 111}In-DOTA-Z{sub HER2:S1

  9. Nota sobre o transporte de krill (euphausia superba Dana vivo da antártica para o Brasil Note on the transportation of a live krill (Euphausia superba Dana from Antartic to Brazil

    Directory of Open Access Journals (Sweden)

    Van Ngan Phan

    1987-01-01

    Full Text Available É apresentado nesta nota experimento sobre o transporte do krill vivo da Antartica para o Brasil, realizado durante a V Expedição Brasileira à Antártica, verão 1986-1987. O sistema de aquário utilizado e a mortalidade do krill em função do tempo e de outros eventos durante o experimento são descritos. A importância deste experimento para o desenvolvimento do estudo experimental do krill é discutida.In this note an experiment on transportation of alive krill from the Antarctica to Brazil during the V Brazilian Expedition to the Antarcticas austral summer 1986-198?3 was reported. The aquarium system and the krill mortality in function of time and other events dur-lng the experiment were described. The importance of this experiment for the development of experimental studies of krill was discussed.

  10. Optical and structural properties of TiO2/Ti/Ag/TiO2 and TiO2/ITO/Ag/ITO/TiO2 metal-dielectric multilayers by RF magnetron sputtering for display application

    International Nuclear Information System (INIS)

    Lee, Jang-Hoon; Lee, Seung-Hyu; Hwangbo, Chang-Kwon; Lee, Kwang-Su

    2004-01-01

    Electromagnetic-interference (EMI) shielding and near-infrared (NIR) cutoff filters for plasma display panels, based on fundamental structures (ITO/Ag/ITO), (TiO 2 /Ti/Ag/TiO 2 ) and (TiO 2 /ITO/Ag/ITO/TiO 2 ), were designed and prepared by RF-magnetron sputtering. The optical, structural and electrical properties of the filters were investigated by using spectrophotometry, Auger electron spectroscopy, X-ray photoelectron spectroscopy, Rutherford backscattering spectroscopy, atomic force microscopy and four-point-probe measurements. The results show that ITO films as the barriers and base layers lead to higher transmittance in the visible spectrum and smoother surface roughness than Ti metal barriers, while maintaining high NIR cutoff characteristics and chemical stability, which may be attributed to the lower absorption in the interfacial layers and better protection of the Ag layers by the ITO layers.

  11. Machinability of experimental Ti-Ag alloys.

    Science.gov (United States)

    Kikuchi, Masafumi; Takahashi, Masatoshi; Okuno, Osamu

    2008-03-01

    This study investigated the machinability of experimental Ti-Ag alloys (5, 10, 20, and 30 mass% Ag) as a new dental titanium alloy candidate for CAD/CAM use. The alloys were slotted with a vertical milling machine and carbide square end mills under two cutting conditions. Machinability was evaluated through cutting force using a three-component force transducer fixed on the table of the milling machine. The horizontal cutting force of the Ti-Ag alloys tended to decrease as the concentration of silver increased. Values of the component of the horizontal cutting force perpendicular to the feed direction for Ti-20% Ag and Ti-30% Ag were more than 20% lower than those for titanium under both cutting conditions. Alloying with silver significantly improved the machinability of titanium in terms of cutting force under the present cutting conditions.

  12. Programas de incentivos fiscais são eficazes?: evidência a partir da avaliação do impacto do programa nota fiscal paulista sobre a arrecadação de ICMS

    Directory of Open Access Journals (Sweden)

    Enlinson Mattos

    2013-03-01

    Full Text Available O objetivo deste artigo é avaliar o impacto do Programa Nota Fiscal Paulista sobre a arrecadação do Estado de São Paulo. Observa-se um efeito positivo e significativo do Programa sobre a arrecadação real do setor terciário entre 5% e 10% comparativamente aos outros Estados do Brasil. Não é encontrado efeito robusto sobre a arrecadação real total, nem efeitos não lineares do Programa. Quando a análise é restrita somente ao Estado de São Paulo, a evidência sugere que o Programa não produziu efeitos diferenciados entre os setores. Contudo, quando o aumento de arrecadação do setor terciário é comparado com a estimativa dos prêmios concedidos tem-se um aumento de no máximo 2% da arrecadação média do setor terciário para São Paulo. Conclui-se, então, que o impacto do Programa parece ter sido limitado. É preciso levar em conta que a análise feita é bastante agregada. Uma análise mais desagregada permitiria uma melhor identificação do efeito da Nota Fiscal Paulista sobre setores específicos, mas infelizmente dados desta natureza não estão disponíveis.

  13. Titanium carbide and its core-shelled derivative TiC-TiO2 as catalyst supports for proton exchange membrane fuel cells

    International Nuclear Information System (INIS)

    Ignaszak, Anna; Song, Chaojie; Zhu, Weimin; Zhang, Jiujun; Bauer, Alex; Baker, Ryan; Neburchilov, Vladimir; Ye, Siyu; Campbell, Stephen

    2012-01-01

    Both TiC and core-shelled TiC-TiO 2 are investigated as catalyst supports for proton exchange membrane fuel cells (PEMFCs). TiC is thermally stable, possesses both low solubility in sulphuric acid and high electronic conductivity. However, TiC undergoes irreversible electrochemical oxidation in dilute perchloric acid and the operating potential range of 0–1.2 V RHE . TiC-TiO 2 core–shell composite is found to be more stable than TiC. Both these materials are used as supports for Pt and Pt–Pd alloy catalysts (Pt/TiC, Pt 3 Pd/TiC and Pt 3 Pd/TiC-TiO 2 ) and are synthesized by microwave-assisted polyol process. The catalytic activities of both Pt 3 Pd/TiC and Pt 3 Pd/TiC-TiO 2 toward the oxygen reduction reaction (ORR) are much higher than those for Pt/TiC. Accelerated durability tests show that TiC supported catalysts are not electrochemically stable. The corresponding TiC-TiO 2 supported catalyst is more stable than that supported by TiC, indicating that with a protective oxide layer on the TiC core, TiC-TiO 2 is a promising PEMFC catalyst support.

  14. A pedagogia vai ao porão: notas críticas sobre as assim chamadas “pedagogia empresarial” e “pedagogia empreendedora”

    Directory of Open Access Journals (Sweden)

    Alessandro de Melo

    2015-02-01

    Full Text Available O artigo reporta-se a um exame crítico das chamadas “Pedagogia empresarial” e da “Pedagogia empreendedora”, representantes de uma teoria educativa conservadora, privatista e adaptacionista, mas que vem ganhando destaque nos currículos dos cursos de Pedagogia ou mestrado em Educação, bem como nas ofertas, públicas e privadas, de cursos de Especialização. O argumento apresentado pelos autores destas correntes aparece como receitas práticas para a solução de problemas, seja para a carreira do profissional da Pedagogia, seja para os indivíduos isoladamente. Ambas possuem em comum a defesa, direta ou indireta, do ideário neoliberal de responsabilização individual pelas questões sociais, e o faz seguindo a receita do senso comum, sem, portanto, uma discussão teórica e consistente da realidade social ou do mundo do trabalho. São enfatizadas as ideias centrais das pedagogias empresarial e empreendedora, a partir da análise de livros e artigos de autores que defendem essas ideias e, assim, busca-se trazer à tona as contradições inerentes às mesmas no confronto com a realidade social, com a qual deve se haver as teorias críticas em educação, visando a transformação social e, ao mesmo tempo, uma formação emancipatória.

  15. Synthesis and characterization of Ag-doped TiO2 nanotubes on Ti-6Al-4V and Ti-6Al-7Nb alloy

    Science.gov (United States)

    Ulfah, Ika Maria; Bachtiar, Boy M.; Murnandityas, Arnita Rut; Slamet

    2018-05-01

    The present paper is focused on comparative behavior of nanotubes growth on Ti-6Al-4V and Ti-6Al-7Nb alloy using electrochemical anodization method. These alloys were anodized in electrolytes solution containing glycerol, water and 0.5wt.% of NH4F. Silver-doped TiO2 nanotubes were synthesized using photo-assisted deposition (PAD) at various Ag loading concentration in 0.05 M, 0.10 M, and 0.15 M. The phase composition and morphological characteristics were investigated by XRD and FESEM/EDX, respectively. The surface wettability was measured by contact angle meter. The results showed that TiO2 nanotubes can be grown on these surface alloys. XRD profiles revealed crystal formation of anatase, rutile and Ag on these surface alloys. According to FESEM images, the average nanotube diameter of Ti-6Al-4V alloy and Ti-6Al-7Nb alloy are 134 nm and 120 nm, respectively. EDX-Mapping analysis showed that Ag desposited over surface of TiO2 nanotubes. The surface wettability indicated hydrophilicity properties on Ti-4Al-4V alloy and Ti-6Al-7Nb alloy surface. This study may contribute to the development of silver-doped TiO2 nanotubes on Ti-6Al-4V alloy and Ti-6Al-7Nb alloy can be considered in various photocatalytic applications such as biomedical devicesdue to photocatalytic mechanism and antibacterial ability.

  16. Phase equilibria among α-Fe(Al, Cr, Ti), liquid and TiC and the formation of TiC in Fe3Al-based alloys

    International Nuclear Information System (INIS)

    Kobayashi, Satoru; Schneider, Andre; Zaefferer, Stefan; Frommeyer, Georg; Raabe, Dierk

    2005-01-01

    In the context of the development of high-strength Fe 3 Al-based alloys, phase equilibria among α-Fe(Al, Cr, Ti), liquid and TiC phases in the Fe-Al-Cr-Ti-C quinary system and the formation of TiC were determined. A pseudo-eutectic trough (L α + L + TiC) exists at 1470 deg C at around Fe-26Al-5Cr-2Ti-1.7C on the vertical section between Fe-26Al-5Cr (α) and Ti-46C (TiC) in at.%. Large faceted TiC precipitates form from the melt after the formation of primary α phase even in hypoeutectic alloys. The TiC formation is thought to be due to the composition change of the liquid towards the hypereutectic compositions by solidification of the primary α. In order to remove the faceted TiC, which are unfavourable for strengthening the material, two different processing routes have been successfully tested: (i) solidification with an increased rate to reduce the composition variation of the liquid during solidification, and (ii) unidirectional solidification to separate the light TiC precipitates from the melt

  17. TEM characterization of a Cr/Ti/TiC graded interlayer for magnetron-sputtered TiC/a-C:H nanocomposite coatings

    International Nuclear Information System (INIS)

    Galvan, D.; Pei, Y.T.; De Hosson, J.Th.M.

    2005-01-01

    A TiC/a-C:H nanocomposite coating is deposited on top of a Cr/Ti/TiC graded interlayer. Cross-section transmission electron microscopy is employed to investigate the detailed structure of the interlayer and the coating. Five different phases are formed as a consequence of the compositional gradient within the interlayer: pure Cr, a solid solution of Ti in Cr, a Ti/Cr amorphous/nanocrystalline phase, α-Ti and TiC. Solid state amorphization occurs during the interlayer deposition to give a dispersion of TiCr β-phase nanocrystals in an amorphous matrix. The TiC phase is textured and contains numerous stacking faults as a result of the growth in under-stoichiometric carbon concentration. C-enriched columnar boundaries are present within the coating, originating from the TiC column boundaries of the interlayer. The work indicates that an interlayer of amorphous/nanocrystalline Ti/Cr phase would reduce the presence of growth defects such as columnar boundaries within nanocomposite TiC/a-C:H coatings

  18. Disclosure of carbon credit operations in management publications Divulgación de las operaciones con créditos de carbono en los in informes de la administración y las notas explicativas Evidenciação das operações com crédito de carbono nos relatórios da administração e nas notas explicativas

    Directory of Open Access Journals (Sweden)

    Vanderlei dos Santos

    2011-03-01

    Full Text Available This study identifies the level of disclosure in management reports and explanatory notes regarding carbon credit operations as related to projects, funding, markets, accounting and taxation. A descriptive research with a qualitative approach was carried out in document analysis of 14 Brazilian companies, publicly traded, that have Clean Development Mechanism projects approved by the Interministerial Commission of Global Climate Change as listed by the Ministry of Science and Technology. By November28, 2008, 195 projects had been approved, 25 of these belonged to these 14 companies. Content analysis technique for management reports and explanatory notes was used for collection of data from the first carbon credits up to the third quarter of 2008. Results show that these companies do not disclose accounting and taxation of the carbon credit transactions in their reporting. Information most often published related to the form of generation of these credits and cost of investment. In conclusion, it is evident that management reports and explanatory notes of these companies with respect to transactions with carbon credits do not respect the full disclosure principleEl estudio tiene el objetivo de identificar el nivel de divulgación, en los informes de la administración y en las notas explicativas, de las operaciones con créditos de carbono relacionadas a los proyectos, medios de financiamiento y mercado, contabilización y tributación. Se realizó una investigación descriptiva, con abordaje cualitativo, mediante análisis de documentos, en las 14 empresas brasileñas de capital abierto que poseen proyectos de Mecanismo de Desarrollo Limpio (MDL aprobados por la Comisión Interministerial de Mudanza Global del Clima, de acuerdo al listado del Ministerio de Ciencia y Tecnología. El 28 de noviembre de 2008 había 195 proyectos aprobados, 25 de los cuales pertenecían a 14 empresas de capital abierto. Para la recogida de los datos, se aplicó la t

  19. Contribution to the study of U-Ti and U-Pu-Ti carbides

    International Nuclear Information System (INIS)

    Milet, C.A.

    1968-01-01

    After having discussed the reasons to use (U,Pu) carbides as fast reactor fuel, we examine the influence of the addition of titanium to these carbides. A preliminary study has been done on the system of U-C-Ti and some properties have been measured such as: density, thermal expansion, electrical resistivity, atmospheric corrosion and compatibility with stainless steel. The systems U-Pu-C-Ti (Pu/U + Pu equal to 15 per cent) and U-C-Ti have been found to be very similar. There exists a two phases region (U,Pu)C + TiC, an eutectic between (U,Pu)C and TiC for approximately 15 at %. The solubilities of U + Pu in TiC and of Ti in (U,Pu)C is less than 1 % at. The addition of titanium does not markedly change thermal expansion coefficients of (U,Pu)C. However the resistance to atmospheric corrosion and compatibility with stainless steel is improved. Thermal conductivity, calculated from electrical resistivity, has increased. On the other side, the density of fissile material is lowered. The combination of (U,Pu)C + TiC seems to be the most promising alloy for application as nuclear fuel. (author) [fr

  20. Effect of annealing process on TiN/TiC bilayers grown by pulsed arc discharge

    International Nuclear Information System (INIS)

    Ramos-Rivera, L.; Escobar, D.; Benavides-Palacios, V.; Arango, P.J.; Restrepo-Parra, E.

    2012-01-01

    In this work, a study of annealing process effect on TiN/TiC bilayer is presented. The annealing temperature was varied between room temperature and 500 °C. Materials were produced by the plasma-assisted pulsed vacuum arc discharge technique. In order to grow the films, a target of Ti with 99.9999% purity and stainless-steel 304 substrate were used. For the production of TiN layer, the reaction chamber was filled up with nitrogen gas until reaching 25 Pa and the discharge was performed at 310 V. The TiC layer was grown in a methane atmosphere at 30 Pa and 270 V. X-ray diffraction and X photoelectron spectroscopy were employed for studying the structure and chemical composition evolution during the annealing process. At 400 °C, TiO 2 phase begun to appear and it was well observed at 500 °C. Crystallite size and microstrain was obtained as a function of the annealing temperature. XPS technique was employed for analyzing the bilayers before and after the annealing process. Narrow spectra of Ti2p, N1s and O1s were obtained, presenting TiO phases.

  1. Reactive magnetron sputtering model at making Ti-TiOx coatings

    International Nuclear Information System (INIS)

    Luchkin, A G; Kashapov, N F

    2014-01-01

    Mathematical model of reactive magnetron sputtering for plant VU 700-D is described. Approximating curves for experimental current-voltage characteristic for two gas input schemas are shown. Choice of gas input schema influences on model parameters (mainly on pumping speed). Reactive magnetron sputtering model allows develop technology of Ti - TiO x coatings deposition without changing atmosphere and pressure in vacuum chamber

  2. Electrospun TiO{sub 2} nanofibers decorated Ti substrate for biomedical application

    Energy Technology Data Exchange (ETDEWEB)

    Dumitriu, Cristina [Åbo Akademi University, Process Chemistry Centre, Laboratory of Analytical Chemistry, Biskopsgatan 8, Åbo-Turku FI-20500 (Finland); Politehnica University Bucharest, Faculty of Applied Chemistry and Materials Science, Department of General Chemistry, 1-7 Polizu, Bucharest Ro-011061 (Romania); Stoian, Andrei Bogdan [Politehnica University Bucharest, Faculty of Applied Chemistry and Materials Science, Department of General Chemistry, 1-7 Polizu, Bucharest Ro-011061 (Romania); Titorencu, Irina; Pruna, Vasile; Jinga, Victor V. [Institute of Cellular Biology and Pathology “Nicolae Simionescu”, 8 B. P. Hasdeu, district 5, Bucharest Ro-050568 (Romania); Latonen, Rose-Marie; Bobacka, Johan [Åbo Akademi University, Process Chemistry Centre, Laboratory of Analytical Chemistry, Biskopsgatan 8, Åbo-Turku FI-20500 (Finland); Demetrescu, Ioana, E-mail: i_demetrescu@chim.upb.ro [Politehnica University Bucharest, Faculty of Applied Chemistry and Materials Science, Department of General Chemistry, 1-7 Polizu, Bucharest Ro-011061 (Romania)

    2014-12-01

    Various TiO{sub 2} nanofibers on Ti surface have been fabricated via electrospinning and calcination. Due to different elaboration conditions the electrospun fibers have different surface feature morphologies, characterized by scanning electronic microscopy, surface roughness, and contact angle measurements. The results have indicated that the average sample diameters are between 32 and 44 nm, roughness between 61 and 416 nm, and all samples are hydrophilic. As biological evaluation, cell culture with MG63 cell line originally derived from a human osteosarcoma was performed and correlation between nanofibers elaboration, properties and cell response was established. The cell adherence and growth are more evident on Ti samples with more aligned fibers, higher roughness and strong hydrophilic character and such fibers have been elaborated with a high speed rotating cylinder collector, confirming the idea that nanostructure elaboration conditions guide the cells' growth. - Highlights: • Processing Ti surface via electrospinning and calcination leads to TiO{sub 2} nanofibers. • The TiO{sub 2} electrospun fibers on Ti have diameters between 10 and 100 nm. • Elaboration with high speed rotating cylinder collector leads to aligned fibers. • The samples have roughness between 61 and 416 nm and all of them are hydrophilic. • Cell adherence and viability is more evident on Ti samples with aligned fibers.

  3. Microstructural evolution and mechanical properties of Ti3SiC2-TiC composites

    International Nuclear Information System (INIS)

    Tian, WuBian; Sun, ZhengMing; Hashimoto, Hitoshi; Du, YuLei

    2010-01-01

    Ti 3 SiC 2 -TiC composites were fabricated by pulse discharge sintering technique using three different sets of powder mixtures, i.e. Ti/Si/TiC (TC30), Ti/Si/C/TiC (SI30) and Ti/Si/C (TSC30). Based on X-ray diffraction (XRD) analysis and microstructural observations, starting powder reactants were found to have little effect on phase content but strong influence on the microstructure in terms of phase distribution. The phase distribution mainly relies on the heat released from reaction and the liquid phase content formed during sintering. The mechanical properties of the fabricated dense samples demonstrate that more homogeneous phase distribution, available by choosing the starting reactants of SI30, results in higher flexural strength, whereas the Vickers hardness is almost independent of the microstructure. The enhanced flexural strength in sample SI30 sintered at 1400 o C is mainly attributed to the homogeneous TiC distribution in the microstructure.

  4. Pure rotational spectra of TiO and TiO2 in VY Canis Majoris

    Science.gov (United States)

    Kamiński, T.; Gottlieb, C. A.; Menten, K. M.; Patel, N. A.; Young, K. H.; Brünken, S.; Müller, H. S. P.; McCarthy, M. C.; Winters, J. M.; Decin, L.

    2013-03-01

    We report the first detection of pure rotational transitions of TiO and TiO2 at (sub-)millimeter wavelengths towards the red supergiant VY CMa. A rotational temperature, Trot, of about 250 K was derived for TiO2. Although Trot was not well constrained for TiO, it is likely somewhat higher than that of TiO2. The detection of the Ti oxides confirms that they are formed in the circumstellar envelopes of cool oxygen-rich stars and may be the "seeds" of inorganic-dust formation, but alternative explanations for our observation of TiO and TiO2 in the cooler regions of the envelope cannot be ruled out at this time. The observations suggest that a significant fraction of the oxides is not converted to dust, but instead remains in the gas phase throughout the outflow. Based on observations carried out with the Submillimeter Array and IRAM Plateau de Bure Interferometer.Plateau de Bure data (FITS file) is only available at the CDS via anonymous ftp to cdsarc.u-strasbg.fr (130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/551/A113

  5. Application of TiN/TiO2 coatings on stainless steel: composition and mechanical reliability

    Science.gov (United States)

    Nikolova, M. P.; Genov, A.; Valkov, S.; Yankov, E.; Dechev, D.; Ivanov, N.; Bezdushnyi, R.; Petrov, P.

    2018-03-01

    The paper reports on the effect of the substrate temperature (350 °C, 380 °C and 420 °C) during reactive magnetron sputtering of a TiN film on the phase composition, texture and mechanical properties of TiN/TiO2 coatings on 304L stainless steel substrates. Pure Ti was used as a cathode source of Ti. The texture and unit cell parameters of both TiN and TiO2 phases of the coating are discussed in relation with the tribological properties and adhesion of the coating. The scratch tests performed showed that the nitride deposited at 380 °C, having the highest unit cell parameter and a predominant (111) texture, possessed the lowest friction coefficient (μ), tangential force and brittleness. The anatase-type TiO2 with predominant (101) pole density and increased c unit cell parameter showed the highest stability on the nitride deposited at 420 °C. The results indicated that the friction coefficient, tangential force and critical forces of fracture could be varied by controlling the coating deposition temperature.

  6. Deformation mechanisms in Ti/TiN multilayer under compressive loading

    International Nuclear Information System (INIS)

    Yang, Wei; Ayoub, Georges; Salehinia, Iman; Mansoor, Bilal; Zbib, Hussein

    2017-01-01

    The promising mechanical, physical and chemical properties of nano-scale metal/ceramic multilayers (MCMs) are of high interest for extreme environment applications. Understanding the plastic deformation mechanisms and the variables affecting those properties is therefore essential. The interface characteristics and the plastic deformation mechanisms under compressive loading in a Ti/TiN multilayer with a semi-coherent interface are numerically investigated. The interface structure of the Ti/TiN interface and the interface misfit dislocation were characterized using molecular dynamic simulations combined with atomically informed Frank-Bilby method. Three possible atomic stacking interface structures are identified according to the crystallographic analysis of the interface. Upon relaxation, large interface areas are occupied with the energetically stable configuration. Furthermore, the higher energy stacking are transformed into misfit dislocations or dislocation nodes. The molecular dynamic compressive stress strain response of the Ti/TiN multilayers exhibited three distinctive peaks. The first peak was generated by the dislocation dissociation of perfect dislocation into pairs of partials dislocation around extended nodes region at the interface. Upon further compression the second peak, identified as the first yielding, resulted from the activation of pyramidal slip planes in the Ti layer. Finally, a third peak identified as the second yielding, occurred when dislocation nucleated/transmitted in/into the TiN layer.

  7. Ultrasound assisted combustion synthesis of TiC in Al-Ti-C system.

    Science.gov (United States)

    Liu, Zhiwei; Rakita, Milan; Xu, Wilson; Wang, Xiaoming; Han, Qingyou

    2015-11-01

    This research investigated the effects of high-intensity ultrasound on the combustion synthesis of TiC particles in Al-Ti-C system. The process involved that high-intensity ultrasound was applied on the surface of a compacted Al-Ti-C pellet directly through a Nb probe during the thermal explosion reaction. By comparing with the sample without ultrasonic treatment, it was found that the thermal explosion reaction for synthesizing TiC phase could take place thoroughly in the ultrasonically treated sample. During the process of synthesizing TiC phase, the dissolution of solid graphite particles into the Al-Ti melt, as well as the nucleation and growth of TiC particles could be promoted effectively due to the effects of ultrasound, leading to an enhancement of the formation of TiC particles. Ultrasound assisted combustion synthesis as a simple and effective approach was proposed for synthesizing materials in this research. Copyright © 2015 Elsevier B.V. All rights reserved.

  8. Fabrication of mesoporus TiO_2 from TiOSO_4 from leached ilmenite

    International Nuclear Information System (INIS)

    Wahyuningsih S; Ramelan AH; Rinawati L; Munifa RMI; Saputri LNMZ; Hanif QA; Pranata HP; Ismoyo YA

    2016-01-01

    The fabrication of mesoporous TiO_2 from TiOSO_4 precursor through roasted process, leaching, and homogeneous hydrolysis of ilmenite had been done. Analysis of X-ray Diffraction (XRD) showed the characteristics of ilmenite, hematite and rutile. After roasting the mineral ilmenite with the addition of Na_2S at a temperature of 800°C the XRD characterization showed peaks characteristic for hematite, TiO_2 anatase, TiO_2 rutile, Na_2SO_4, NaFeS_2, and NaFeO_2. Leaching processes of roasted ilmenite which maintained with an addition of strong acid H_2SO_4 6; 7.2; 9; 12, and 18 N were obtained TiOSO_4 filtrate. The results indicated that the more concentration of H_2SO_4 the more solubility of ilmenite, where optimum solubility was achieved when H_2SO_4 concentration was 12 N. The fabrication of mesoporous TiO_2 from TiOSO_4 was conducted with homogeneous hydrolysis method used urea and surfactant template F-127. XRD characterization results indicated the dominant peak of TiO_2 anatase. Crystallite size of 3.2 nm was obtained and the results of Scanning Electron Microscopy (SEM) showed that the presence of urea and surfactant be able to arrange porosity. (author)

  9. Electron microscopy investigation of the TiBAl and TiCAl grain refiner master alloys

    International Nuclear Information System (INIS)

    Cizek, P

    2006-01-01

    The present work brings a detailed statistical analysis of the microstructural characteristics and chemistry of the second phase particles present in the Al-5Ti-1B and Al- 3Ti-0.15C (wt.%) commercial grain refiner rods used in the Al casting industry. The investigation was performed using the TEM, EDS, STEM and HREM techniques. Both refiner rods contained large, blocky Al 3 Ti DO 22 particles. Borides present in the TiBAl rod, known to be main α-Al nucleation substrates, exhibited a facetted, hexagonal platelet morphology and largely represented a mixed (Ti,Al)B 2 phase, with Ti and Al contents changing continuously across the particle dimensions. There were two distinct families of small particles observed in the TiCAl rod. The coarser, facetted particles corresponded to cubic TiC crystal structure and these are believed to be major α-Al nucleation sites. The family of finer, round particles appeared to correspond to orthorhombic Al 6 Fe phase and their role in the nucleation process remains to be clarified. The results obtained may be used in optimising the grain refiner rod microstructures that would ensure improved refining performance during casting

  10. Electron microscopy investigation of the TiBAl and TiCAl grain refiner master alloys

    Energy Technology Data Exchange (ETDEWEB)

    Cizek, P [IMMPETUS, Department of Engineering Materials, University of Sheffield, Mappin Street, Sheffield S1 3JD (United Kingdom)

    2006-02-22

    The present work brings a detailed statistical analysis of the microstructural characteristics and chemistry of the second phase particles present in the Al-5Ti-1B and Al- 3Ti-0.15C (wt.%) commercial grain refiner rods used in the Al casting industry. The investigation was performed using the TEM, EDS, STEM and HREM techniques. Both refiner rods contained large, blocky Al{sub 3}Ti DO{sub 22} particles. Borides present in the TiBAl rod, known to be main {alpha}-Al nucleation substrates, exhibited a facetted, hexagonal platelet morphology and largely represented a mixed (Ti,Al)B{sub 2} phase, with Ti and Al contents changing continuously across the particle dimensions. There were two distinct families of small particles observed in the TiCAl rod. The coarser, facetted particles corresponded to cubic TiC crystal structure and these are believed to be major {alpha}-Al nucleation sites. The family of finer, round particles appeared to correspond to orthorhombic Al{sub 6}Fe phase and their role in the nucleation process remains to be clarified. The results obtained may be used in optimising the grain refiner rod microstructures that would ensure improved refining performance during casting.

  11. Characterization and Comparison of Photocatalytic Activity Silver Ion doped on TiO2(TiO2/Ag+) and Silver Ion doped on Black TiO2(Black TiO2/Ag+)

    Science.gov (United States)

    Kim, Jin Yi; Sim, Ho Hyung; Song, Sinae; Noh, Yeoung Ah; Lee, Hong Woon; Taik Kim, Hee

    2018-03-01

    Titanium dioxide (TiO2) is one of the representative ceramic materials containing photocatalyst, optic and antibacterial activity. The hydroxyl radical in TiO2 applies to the intensive oxidizing agent, hence TiO2 is suitable to use photocatalytic materials. Black TiO2was prepared through reduction of amorphous TiO2 conducting under H2 which leads to color changes. Its black color is proven that absorbs 100% light across the whole-visible light, drawing enhancement of photocatalytic property. In this study, we aimed to compare the photocatalytic activity of silver ion doped on TiO2(TiO2/Ag+) and silver ion doped on black TiO2(black TiO2/Ag+) under visible light range. TiO2/Ag+ was fabricated following steps. 1) TiO2 was synthesized by a sol-gel method from Titanium tetraisopropoxide (TTIP). 2) Then AgNO3 was added during an aging process step for silver ion doping on the surface of TiO2. Moreover, Black TiO2/Ag+ was obtained same as TiO2/Ag+ except for calcination under H2. The samples were characterized X-ray diffraction (XRD), UV-visible reflectance (UV-vis DRS), and Methylene Blue degradation test. XRD analysis confirmed morphology of TiO2. The band gap of black TiO2/Ag+ was confirmed (2.6 eV) through UV-vis DRS, which was lower than TiO2/Ag+ (2.9 eV). The photocatalytic effect was conducted by methylene blue degradation test. It demonstrated that black TiO2/Ag+ had a photocatalytic effect under UV light also visible light.

  12. Surface characterizations of TiH{sub 2} powders before and after dehydrogenation

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Yeguang [School of Aeronautics & Astronautics, Sichuan University, Chengdu, 610065 (China); Wang, Chunming; Liu, Yang; Liu, Shaopeng; Xiao, Sufen [College of Materials Science and Engineering, Sichuan University, Chengdu, 610065 (China); Chen, Yungui, E-mail: ygchen60@aliyun.com [School of Aeronautics & Astronautics, Sichuan University, Chengdu, 610065 (China); College of Materials Science and Engineering, Sichuan University, Chengdu, 610065 (China)

    2017-07-15

    Highlights: • Oxides characteristics of TiH{sub 2} and HDH-Ti are investigated by XPS depth profiles. • The relative contents of TiO{sub 2}, Ti{sub 2}O{sub 3} and TiO are lower after dehydrogenation. • The decrease of Ti{sub 2}O{sub 3} is more remarkable followed by TiO{sub 2}, TiO after dehydrogenation. • The H atoms of TiH{sub 2} react preferentially with Ti{sub 2}O{sub 3} followed by TiO{sub 2}, TiO. - Abstract: The oxide film of TiH{sub 2} and HDH-Ti powder are investigated using X-ray photoelectron spectroscopy (XPS). The XPS depth profiles indicate that there exists mainly Ti{sup 2+}, Ti{sup 3+}, Ti{sup 4+} and Ti{sup 0} on TiH{sub 2} and HDH-Ti surface. The intensities of Ti 2p decrease for Ti{sup 4+}, first increase and then decrease for Ti{sup 3+} and Ti{sup 2+}, and increase all the time for Ti{sup 0} in the surface layer of TiH{sub 2} and HDH-Ti with the sputtering depth increasing. The relative fractions of TiO{sub 2}, Ti{sub 2}O{sub 3} and TiO for the Ti 2p of TiH{sub 2} and HDH-Ti first decrease and then slow down with the sputtering depth increasing. Meanwhile, the relative fractions of TiO{sub 2} and TiO of HDH-Ti are lower than that of TiH{sub 2} after the sputtering depth of about 5 nm, and the fraction of Ti{sub 2}O{sub 3} of HDH-Ti is always lower that of TiH{sub 2}. In addition, the decrease of Ti{sub 2}O{sub 3} is much pronounced, followed by TiO{sub 2} and TiO before and after dehydrogenation when the sputtering depth is more than 5 nm. The XPS depth profiles and calculation results suggest that the release of H atoms removes the part of oxygen on TiH{sub 2} surface, which results in the thinner oxide layer and low oxygen content of HDH-Ti powder.

  13. Nonstoichiometry of Epitaxial FeTiO(3+delta) Films

    Science.gov (United States)

    2003-01-01

    nonstoichiometry of the FeTiO3 +8 films was probably produced by cation vacancies and disarrangement of Fe3+ and Ti4 ions, which randomly occupied both interstitial...and substitutional sites of the FeTiO 3 related structure. INTRODUCTION Solid solutions of ot-Fe20 3- FeTiO3 (hematite-ilmenite) series are known to...tried to confirm preparation conditions of stoichiometric FeTiO 3 films. According to a literature on bulk crystal growth of FeTiO3 [5], very low oxygen

  14. Preparation and solar-light photocatalytic activity of TiO2 composites: TiO2/kaolin, TiO2/diatomite, and TiO2/zeolite

    Science.gov (United States)

    Li, Y.; Li, S. G.; Wang, J.; Li, Y.; Ma, C. H.; Zhang, L.

    2014-12-01

    Three TiO2 loaded composites, TiO2/kaolin, TiO2/diatomite, and TiO2/zeolite, were prepared in order to improve the solar-light photocatalytic activity of TiO2. The results showed that the photocatalytic activity could obviously be enhanced by loading appropriate amount of inorganic mineral materials. Meanwhile, TiO2 content, heat-treatment temperature and heat-treatment time on the photocatalytic activity were reviewed. Otherwise, the effect of solar light irradiation time and dye concentration on the photocatalytic degradation of Acid Red B was investigated. Furthermore, the degradation mechanism and adsorption process were also discussed.

  15. Electrocatalytic activity of Pd-loaded Ti/TiO2 nanotubes cathode for TCE reduction in groundwater.

    Science.gov (United States)

    Xie, Wenjing; Yuan, Songhu; Mao, Xuhui; Hu, Wei; Liao, Peng; Tong, Man; Alshawabkeh, Akram N

    2013-07-01

    A novel cathode, Pd loaded Ti/TiO2 nanotubes (Pd-Ti/TiO2NTs), is synthesized for the electrocatalytic reduction of trichloroethylene (TCE) in groundwater. Pd nanoparticles are successfully loaded on TiO2 nanotubes which grow on Ti plate via anodization. Using Pd-Ti/TiO2NTs as the cathode in an undivided electrolytic cell, TCE is efficiently and quantitatively transformed to ethane. Under conditions of 100 mA and pH 7, the removal efficiency of TCE (21 mg/L) is up to 91% within 120 min, following pseudo-first-order kinetics with the rate constant of 0.019 min(-1). Reduction rates increase from 0.007 to 0.019 min(-1) with increasing the current from 20 to 100 mA, slightly decrease in the presence of 10 mM chloride or bicarbonate, and decline with increasing the concentrations of sulfite or sulfide. O2 generated at the anode slightly influences TCE reduction. At low currents, TCE is mainly reduced by direct electron transfer on the Pd-Ti/TiO2NT cathode. However, the contribution of Pd-catalytic hydrodechlorination, an indirect reduction mechanism, becomes significant with increasing the current. Compared with other common cathodes, i.e., Ti-based mixed metal oxides, graphite and Pd/Ti, Pd-Ti/TiO2NTs cathode shows superior performance for TCE reduction. Copyright © 2013 Elsevier Ltd. All rights reserved.

  16. Influence of (TiC+TiB) on the microstructure and tensile properties of Ti-B20 matrix alloy

    Energy Technology Data Exchange (ETDEWEB)

    Rahoma, H.K.S. [National Key Laboratory of Science and Technology on Precision Heat Processing of Metals, Harbin Institute of Technology, Harbin 150001 (China); Chen, Y.Y., E-mail: yychen@hit.edu.cn [National Key Laboratory of Science and Technology on Precision Heat Processing of Metals, Harbin Institute of Technology, Harbin 150001 (China); State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001 (China); Wang, X.P.; Xiao, S.L. [National Key Laboratory of Science and Technology on Precision Heat Processing of Metals, Harbin Institute of Technology, Harbin 150001 (China)

    2015-04-05

    Highlights: • After forging, the microstructure was significantly refined and uniform. • The presence of carbide and boride also led to uniform and finer precipitation of α during aging as compared to the matrix alloy. • The size of secondary α phase increased with the increase of aging temperature. This trend leads to the decrease of strength and the increase of ductility. - Abstract: A hybrid of (TiB+TiC) reinforced beta titanium matrix (Ti-B20) were produced by non-consumable arc-melting technology and hot-forging. Microstructures of the composites were observed by optical microscopy (OM), transmission electron microscope (TEM) and scanning electron microscopy (SEM). The results show that both the TiB whiskers and TiC particles tend to segregate at β boundaries. The β grain size and secondary α lath width are refined by reinforcements and aging treatment. Evolution of tensile properties shows that enhancement in yield strength and ultimate tensile strength with the addition of reinforcements, as well as the remarkable increase in the ductility can be attributed to aging treatment at 600 °C and 650 °C. The size of secondary α phase increased with the increase of aging temperature. This trend leads to the decrease of strength and the increase of ductility to get good balance of properties. The fracture mechanism of the composite can be attributed to the cracking of the reinforcements.

  17. Nanotubular surface and morphology of Ti-binary and Ti-ternary alloys for biocompatibility

    International Nuclear Information System (INIS)

    Choe, Han-Cheol

    2011-01-01

    The nanotubular surface of Ti-binary and Ti-ternary alloys for biomaterials has been investigated using various methods of surface characterization. Binary Ti-xNb (x = 10, 20, 30, and 40 wt.%) and ternary Ti-30Ta-xNb (x = 3, 7 and 15 wt.%) alloys were prepared by using the high-purity sponges; Ti, Ta and Zr spheres. The nanotube on the alloy surface was formed in 1.0 M H 3 PO 4 with small additions of NaF (0.5 and 0.8 wt.%), using a potentiostat. For cell proliferation, an MC3T3-E1 mouse osteoblast was used. The surface characteristics were investigated using field-emission scanning electron microscope, energy dispersive spectroscopy, and X-ray photoelectron spectroscopy. Binary Ti-xZr alloys had a lamellar and a needle-like structure, whereas, ternary Ti-30Ta-xZr alloys had equiaxed grains with a lamellar martensitic α' structure. The thickness of the needle-like laths of the α-phase increased as the Zr content increased. The nanotubes formed on the α phase and β phase showed a different size and shape appearance with Zr content. As the Zr content increased from 3 to 40 wt.%, the diameter of the nanotubes in Ti-xZr and Ti-30Ta-xZr alloy decreased from 200 nm to 50 nm. The nanotubular Ti-30Ta-15Zr alloy surface with a diameter of 50 nm provided a good osseointegration; cell proliferation, migration and differentiation.

  18. Electrochemical behavior of hydroxyapatite/TiN multi-layer coatings on Ti alloys

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Eun-Ju [Department of Dental Materials, Research Center of Nano-Interface Activation for Biomaterials, School of Dentistry, Chosun University (Korea, Republic of); Jeong, Yong-Hoon [Biomechanics and Tissue Engineering Laboratory, Division of Orthodontics, College of Dentistry, The Ohio State University, Columbus, OH (United States); Choe, Han-Cheol, E-mail: hcchoe@chosun.ac.kr [Department of Dental Materials, Research Center of Nano-Interface Activation for Biomaterials, School of Dentistry, Chosun University (Korea, Republic of); Brantley, William A. [Division of Restorative Science and Prosthodontics, College of Dentistry, The Ohio State University, Columbus, OH (United States)

    2014-12-01

    The electrochemical behavior of hydroxyapatite (HA) and titanium nitride (TiN) multi-layer coatings on Ti–Nb–Zr alloys was investigated by a variety of surface analytical methods. The HA/TiN layers were deposited using a magnetron sputtering system. The HA target was made of human tooth-ash sintered at 1300 °C for 1 h and had an average Ca/P ratio of 1.9. From X-ray diffraction patterns, the Ti–29Nb–5Zr alloy was composed entirely of equiaxed β-phase exhibiting the principal (110) reflection, and the coating exhibited the (111) and (200) reflections for TiN and the (112) and (202) reflections for HA. At the coating surface the HA films consisted of granular particles, and the surface roughness was 4.22 nm. The thickness of the coating layers increased in the order of HA/TiN (lowest), TiN, and HA (highest). Potentiodynamic polarization measurements revealed that the corrosion current density was the lowest, and the corrosion potential and polarization resistance the highest, when the Ti–29Nb–5Zr surface was covered by the HA/TiN film, compared to solely HA or TiN films. - Highlights: • HA/TiN films were deposited by magnetron sputtering on a Ti–29Nb–5Zr biomedical alloy. • The corrosion current density for the HA/TiN films was lower than that of the non-coated alloy. • The polarization resistance of the HA/TiN films was higher than that of the non-coated alloy.

  19. Electrochemical behavior of hydroxyapatite/TiN multi-layer coatings on Ti alloys

    International Nuclear Information System (INIS)

    Kim, Eun-Ju; Jeong, Yong-Hoon; Choe, Han-Cheol; Brantley, William A.

    2014-01-01

    The electrochemical behavior of hydroxyapatite (HA) and titanium nitride (TiN) multi-layer coatings on Ti–Nb–Zr alloys was investigated by a variety of surface analytical methods. The HA/TiN layers were deposited using a magnetron sputtering system. The HA target was made of human tooth-ash sintered at 1300 °C for 1 h and had an average Ca/P ratio of 1.9. From X-ray diffraction patterns, the Ti–29Nb–5Zr alloy was composed entirely of equiaxed β-phase exhibiting the principal (110) reflection, and the coating exhibited the (111) and (200) reflections for TiN and the (112) and (202) reflections for HA. At the coating surface the HA films consisted of granular particles, and the surface roughness was 4.22 nm. The thickness of the coating layers increased in the order of HA/TiN (lowest), TiN, and HA (highest). Potentiodynamic polarization measurements revealed that the corrosion current density was the lowest, and the corrosion potential and polarization resistance the highest, when the Ti–29Nb–5Zr surface was covered by the HA/TiN film, compared to solely HA or TiN films. - Highlights: • HA/TiN films were deposited by magnetron sputtering on a Ti–29Nb–5Zr biomedical alloy. • The corrosion current density for the HA/TiN films was lower than that of the non-coated alloy. • The polarization resistance of the HA/TiN films was higher than that of the non-coated alloy

  20. Electron densities and chemical bonding in TiC, TiN and TiO derived from energy band calculations

    International Nuclear Information System (INIS)

    Blaha, P.

    1983-10-01

    It was the aim of this paper to describe the chemical bonding of TiC, TiN and TiO by means of energy bands and electron densities. Using the respective potentials we have calculated the bandstructure of a finer k-grid with the linearized APW method to obtain accurate densities of states (DOS). These DOS wer partitioned into local partial contributions and the metal d DOS were further decomposed into tsub(2g) and esub(g) symmetry components in order to additionally characterize bonding. The electron densities corresponding to the occupied valence states are obtained from the LAPW calculations. They provide further insight into characteristic trends in the series from TiC to TiO: around the nonmetal site the density shows increasing localisation; around the metal site the deviation from spherical symmetry changes from esub(g) to tsub(2g). Electron density plots of characteristic band states allow to describe different types of bonding occurring in these systems. For TiC and TiN recent measurements of the electron densities exist for samples of TiCsub(0.94) and TiNsub(0.99), where defects cause static displacements of the Ti atoms. If this effect can be compensated by an atomic model one hopefully can extrapolate to stoichiometric composition. This procedure allows a comparison with structure factors derived from theoretical electron densities. The agreement for TiN is very good. For TiC the extrapolated data agree in terms of the deviations from spherical symmetry near the Ti site with the LAPW data, but the densities around both atoms are more localized than in theory. An explanation could be: a) the defects affect the electronic structure in TiCsub(0.94) with respect to TiCsub(1.0): b) the applied atomic model does not properly extrapolate to stoichiometry, because parameters of this model correlate or become unphysical. (Author)

  1. Nota sobre Bromus Willdenowii Kunth

    Directory of Open Access Journals (Sweden)

    Pinto Escobar Polidoro

    1985-09-01

    Full Text Available Procedente de Suramérica fue introducida en Norteamérica una planta que es utilizada como buen forraje y que corresponde a una especie del género Bromus de la sección Ceratochloa (Gramineae referida a Bromus unioloides Kunth. HITCHCOCK (1934 después de examinar fragmentos del ejernplar de Commerson "ex agro bonaerinsi" (C, considerado como tipo nomenclatural y asumir que el ejemplar había sido obtenido en Lima (Perú, 10 asignó a Bromus catbarticus Yah!. Posteriormente PARODI (1956 Y HUBBARD (1956, rechazaron el nornbre de Bromus catbarticus Yah 1 como nomen confussum y propusieron la validez de Bromus unioloides Kunth.

  2. Notas sobre publicaciones medievales portuguesas

    Directory of Open Access Journals (Sweden)

    José Luis MARTÍN

    2009-11-01

    Full Text Available Contra lo que debiera suceder, la proximidad con Portugal no incita al conocimiento de su historia y son muy raros los manuales de Historia de España en los que se concede a la Edad Media Portuguesa la importancia que realmente tiene, y en los tratados de Historia Medieval Europea el espacio dedicado a Portugal es mínimo, al menos hasta la época de los Descubrimientos; por otra parte, son contados los medievalistas españoles que se interesan por la historia de Portugal. Ante estos silencios y ante la escasa presencia en las bibliotecas españolas de obras portuguesas el estudiante de historia puede pensar que el país vecino carece de medievalistas de relieve, que su historia medieval está por hacer... y nada más lejos de la realidad como intentaré probar en este breve comentario, sin ánimo exhaustivo, sobre algunas de las últimas publicaciones aparecidas en Portugal.

  3. NOTAS SOBRE DE UTILITATE CREDENDI

    Directory of Open Access Journals (Sweden)

    Guillermo Hurtado

    2013-11-01

    Full Text Available This article examines some of the arguments of Saint Augustine’s De utilitate credendi, with the purpose of incorporate them in contemporary philosophical discussions about belief, testimony and tradition.

  4. Nota editorial: El profesor Ucros

    Directory of Open Access Journals (Sweden)

    Edmundo Rico

    1933-11-01

    Full Text Available Pretextando futilezas y sin que su dúctil mano quirúrgica experimentara siquiera el más imperceptible malestar involutivo, Rafael Ucrós se retiró voluntariamente de la clínica ginecológica, Es verdad que treinta años de ingrato profesorado en los trópicos cuando no fatigan la inteligencia, desilusionan y hasta sublevan la energía. Pero, también es cierto que las dotes de sutileza técnica del impetuoso cirujano, quizás le imponían el deber científico de fortalecer hasta el fin, la obra engendrada por la triple alianza de su saber, de de su dinamismo y de su perfecta moral médica.

  5. Nota de las editoras invitadas

    Directory of Open Access Journals (Sweden)

    María Eugenia Ibarra Melo

    2016-01-01

    Full Text Available Los estudios de género cada vez adquieren mayor importancia en las Ciencias Sociales, en general y en la sociología, en particular, sobre todo porque en ellos se tratan problemas contemporáneos ligados a la sexualidad, la diversidad, la estructuración de las relaciones de poder, los cuales han sido expresados en público a través de las resistencias que despliegan sus principales afectados. Como demuestran los artículos publicados en revistas dedicadas a estas reflexiones[1], estos estudios se ocupan de las desigualdades sociales entre hombres y mujeres, de la producción de exclusiones y de las identidades diversas que no se ajustan al modelo de género. [1] Entre otras revistas consultadas están: la Revista Interdisciplinaria de Estudios de Género, de El Colegio de México; la Revista de Estudios de Género. La Ventana, de la Universidad de Guadalajara; la Revista Punto G(énero del Núcleo género y sociedad Julieta Kirkwood, de la Universidad de Chile; Nomadías. Revista del Centro de Estudios de Género y Cultura de América Latina, de la Universidad de Chile; Íconos. Revista de Ciencias Sociales, de la Facultad Latinoamericana de Ciencias Sociales. Ecuador, que dedicó tres números a temas relacionados: n.° 45: Nuevas voces feministas en América Latina: ¿continuidades, rupturas, resistencias?, n.° 39: ¿Cómo se piensa lo Queer en América Latina, n.° 35: Ciudadanías y sexualidades en América Latina; La Aljaba Segunda época: Revista de Estudios de la Mujer, de las universidades del Comahue, de Luján y de La Pampa (Argentina, y Cadernos Pagu, Nucleo de estudos de gênero Pagu, de la Universidad de Campinas, de Brasil. Además de las revistas colombianas La Manzana de la Discordia, Sociedad y Economía, CS y otras que recientemente dedicaron monográficos a estos estudios.

  6. Nota editorial: materialismo e idealismo

    Directory of Open Access Journals (Sweden)

    Gonzalo Buenahora

    1935-07-01

    Full Text Available Hay actualmente en la Universidad bogotana un apreciable número de estudiantes que tienen de la palabra materialismo un concepto equivocado. Para ellos el materialista es un hombre sin sentimientos ni corazón, sin ideales de ninguna especie, sin ningún principio moral, ni norma alguna espiritual. Un hombre que ha llegado a destruir lo más noble y bello de la vida humana, el espíritu, para subyugar todo anhelo a la materia, a los sentidos y a la carne. Por eso le creen un sér torpe, vicioso, concupiscente y sensual. A ese grupo de estudiantes quiero aclararles el concepto, vulgarizándolo solamente, ya que una distinción profunda y plena de las dos únicas teorías que en definitiva luchan en el mundo, la idealista y la materialista, la encontrarán mejor expuesta en cualquier honrado compendio, de esos que se cubren de polvo y abandono en una mísera pena de arrabal. El materialismo es una escuela filosófica que nos enseña a concebir el mundo y a concebir el hombre de una manera más razonable que el idealismo, más de acuerdo con la realidad científica, .más en armonía con la verdad biológica, y por tanto, de un modo más humano y natural.

  7. Liquid phase interaction in TiC0,5N0,5-TiNi-Mo and TiC0,5N0,5-TiNi-Ti-Mo

    International Nuclear Information System (INIS)

    Askarova, L.Kh; Grigorov, I.G.; Zajnulin, Yu.G.

    1998-01-01

    Using the methods of X ray diffraction analysis, electron microscopy and X ray spectrum microanalysis a study was made into specific features of phase and structure formation in alloys TiC 0,5 N 0,5 -TiNi-Mo and TiC 0,5 N 0,5 -TiNi-Mo in the presence of a liquid phase at temperatures of 1380-1600 deg C. It is revealed that the physical and chemical processes taking place during the liquid-phase sintering result in the formation of a three-phase alloy consisting of nonstoichiometric titanium carbonitride TiC 0.5-x N 0.5-x , a molybdenum base solid solution of titanium, nickel and carbon Mo(Ti, Ni, C) and one of two intermetallic compounds, either TiNi or Ni 3 Ti. Metallic element concentration in individual phase constituents of the alloy is determined by means of X ray spectrum microanalysis

  8. Stepwise Ti-Cl, Ti-CH3, and Ti-C6H5 bond dissociation enthalpies in bis(pentamethylcyclopentadienyl)titanium complexes

    NARCIS (Netherlands)

    Dias, Alberto R.; Salema, Margarida S.; Martinho Simões, Jose A.; Pattiasina, Johannes W.; Teuben, Jan H.

    1988-01-01

    Reaction-solution calorimetric studies involving the complexes Ti[η5-C5(CH3)5]2(CH3)2, Ti[η5-C5(CH3)5]2(CH3), Ti[η5-C5(CH3)5]2(C6H5), Ti[η5-C5(CH3)5]2Cl2, and Ti[η5-C5(CH3)5]2Cl, have enabled derivation of titanium-carbon and titanium-chlorine stepwise bond dissociation enthalpies in these species.

  9. Effects of strong interactions between Ti and ceria on the structures of Ti/CeO2.

    Science.gov (United States)

    Yao, Xiao-Dan; Zhu, Kong-Jie; Teng, Bo-Tao; Yu, Cao-Ming; Zhang, Yun-Lei; Liu, Ya; Fan, Maohong; Wen, Xiao-Dong

    2016-11-30

    The effects of strong interactions between Ti and ceria on the structures of Ti/CeO 2 (111) are systematically investigated by density functional theory calculation. To our best knowledge, the adsorption energy of a Ti atom at the hollow site of CeO 2 is the highest value (-7.99 eV) reported in the literature compared with those of Au (-0.88--1.26 eV), Ag (-1.42 eV), Cu (-2.69 eV), Pd (-1.75 eV), Pt (-2.62 eV) and Sn (-3.68 eV). It is very interesting to find that Ti adatoms disperse at the hollow site of CeO 2 (111) to form surface TiO x species, instead of aggregating to form Ti metal clusters for the Ti-CeO 2 interactions that are much stronger than those of Ti-Ti ones. Ti adatoms are completely oxidized to Ti 4+ ions if they are monatomically dispersed on the next near hollow sites of CeO 2 (111) (xTi-NN-hollow); while Ti 3+ ions are observed when they locate at the near hollow sites (xTi-N-hollow). Due to the electronic repulsive effects among Ti 3+ ions, the adsorption energies of xTi-N-hollow are slightly weaker than those of xTi-NN-hollow. Simultaneously, the existence of unstable Ti 3+ ions on xTi-N-hollow also leads to the restructuring of xTi-N-hollow by surface O atoms of ceria transferring to the top of Ti 3+ ions, or oxidation by O 2 adsorption and dissociation. Both processes improve the stability of the xTi/CeO 2 system by Ti 3+ oxidation. Correspondingly, surface TiO 2 -like species form. This work sheds light into the structures of metal/CeO 2 catalysts with strong interactions between the metal and the ceria support.

  10. Diffusion characteristics in the Cu-Ti system

    Energy Technology Data Exchange (ETDEWEB)

    Laik, Arijit; Kale, Gajanan Balaji [Bhabha Atomic Reseach Centre, Mumbai (India). Materials Science Div.; Bhanumurthy, Karanam [Bhabha Atomic Reseach Centre, Mumbai (India). Scientific Information Resource Div.; Kashyap, Bhagwati Prasad [Indian Institute of Technology Bombay, Mumbai (India). Dept. of Metallurgical Engineering

    2012-06-15

    The formation and growth of intermetallic compounds by diffusion reaction of Cu and Ti were investigated in the temperature range 720 - 860 C using bulk diffusion couples. Only four, out of the seven stable intermediate compounds of the Cu-Ti system, were formed in the diffusion reaction zone in the sequence CuTi, Cu{sub 4}Ti, Cu{sub 4}Ti{sub 3} and CuTi{sub 2}. The activation energies required for the growth of these compounds were determined. The diffusion characteristics of Cu{sub 4}Ti, CuTi and Cu{sub 4}Ti{sub 3} and Cu(Ti) solid solution were evaluated. The activation energies for diffusion in these compounds were 192.2, 187.7 and 209.2 kJ mol{sup -1} respectively, while in Cu(Ti), the activation energy increased linearly from 201.0 kJ mol{sup -1} to 247.5 kJ mol{sup -1} with increasing concentration of Ti, in the range 0.5 - 4.0 at.%. The impurity diffusion coefficient of Ti in Cu and its temperature dependence were also estimated. A correlation between the impurity diffusion parameters for several elements in Cu matrix has been established. (orig.)

  11. Stress-induced martensitic transformations in NiTi and NiTi-TiC composites investigated by neutron diffraction

    International Nuclear Information System (INIS)

    Vaidyanathan, R.; Dunand, D.C.

    1999-01-01

    Superelastic NiTi (51.0 at.% Ni) specimens reinforced with 0, 10 and 20 vol.% TiC particles were deformed under uniaxial compression while neutron diffraction spectra were collected. The experiments yielded in-situ measurements of the thermoelastic stress-induced transformation. The evolution of austenite/martensite phase fractions and of elastic strains in the reinforcing TiC particles and the austenite matrix were obtained by Rietveld refinement during the loading cycle as the austenite transforms to martensite (and its subsequent back transformation during unloading). Phase fractions and strains are discussed in terms of load transfer in composites where the matrix undergoes a stress-induced phase transformation. (orig.)

  12. Formation of Ti(III) and Ti(IV) states in Ti{sub 3}O{sub 5} nano- and microfibers obtained from hydrothermal annealing of C-doped TiO{sub 2} on Si

    Energy Technology Data Exchange (ETDEWEB)

    Stem, Nair, E-mail: nairstem@hotmail.com [Laboratório de Sistemas Integráveis (LSI), Escola Politécnica, Universidade de São Paulo, Av. Prof. Luciano Gualberto 158, 05508900 São Paulo, SP (Brazil); Souza, Michele L.; Araújo de Faria, Dalva Lúcia Araújo [Laboratório de Espectroscopia Molecular (LEM), Instituto de Química, Universidade de São Paulo, Av. Prof. Lineu Prestes 748, 05508900 São Paulo, SP (Brazil); Santos Filho, Sebastião G. dos [Laboratório de Sistemas Integráveis (LSI), Escola Politécnica, Universidade de São Paulo, Av. Prof. Luciano Gualberto 158, 05508900 São Paulo, SP (Brazil)

    2014-05-02

    In this work, it is investigated the formation of Ti(III) and Ti(IV) states at the surface and in the bulk of the Ti{sub 3}O{sub 5} material grown as meshes of nano- and micro-fibers obtained from hydrothermal annealing of C-doped TiO{sub 2} on Si. The topography and distribution of the fibers in the meshes were characterized by atomic force microscopy. When the fiber distribution was more compact, a higher photoluminescence signal at 850 nm (1.46 eV) was obtained, indicating the presence of a higher number of defects corresponding to the Ti(III) sites. From X-ray photoelectron spectroscopy, it was obtained a Ti(III)/Ti(IV) ratio much lower than the expected value for the Ti{sub 3}O{sub 5} phase (2 Ti(III): 1 Ti(IV)). The discrepancy was mainly attributed to the reaction of surface Ti(III) states of the Ti{sub 3}O{sub 5} fibers with water during the hydrothermal annealing, resulting in surface Ti(IV) with -OH radicals. On the other hand, X-ray photoelectron spectroscopy also indicated that substitutional and interstitial carbon atoms coexist, elemental carbon exists in the samples due to the co-deposition process and, as a result, the carbon inside of the TiO{sub 2} rutile lattice is acting as one of the precursors for the formation of Ti{sub 3}O{sub 5}. - Highlights: • Ti(III) states are detected inside of Ti{sub 3}O{sub 5} nano- and microfibers. • Ti(IV) states are predominantly detected on the surface of Ti{sub 3}O{sub 5} nano- and microfibers. • Photoluminescence at 850 nm for Ti{sub 3}O{sub 5} is due to defects associated to Ti(III). • Rutile possibly changes to C2/m Ti{sub 3}O{sub 5} during the hydrothermal annealing of C-doped TiO{sub 2}.

  13. Infiltrated TiC/Cu composites

    International Nuclear Information System (INIS)

    Frage, N.; Froumin, N.; Rubinovich, L.; Dariel, M.P.

    2001-01-01

    One approach for the fabrication of ceramic-metal composites is based on the pressureless impregnation of a porous ceramic preform by a molten metal. Molten Cu does not react with TiC and the wetting angle is close to 90 o . Nonetheless, molten Cu readily impregnates partially sintered TiC preforms. A model that describes the dependence of the critical contact angle for spontaneous impregnation by molten metals in partially sintered preforms on the level of densification and on the morphology of the particles was developed. For high aspect ratios of the particles forming the preform, wetting angles close to 90 o still allow impregnation by the molten metal. The results of the model were confirmed by infiltration of partially sintered TiC preforms with molten Cu and by fabrication of the TiC/Cu composites with various ceramic-to metal ratios. Decreasing of the metal content in the composite from 50 vol.% to 10 vol.% leads to a hardness increase from 250 to 1800 HV, and to the decrease of the bending strength from 960 to 280 MPa. The resistivity of these TiC/Cu composites decreases from 142 ohm cm to 25 ohm cm. (author)

  14. Ti on GaAs(110)

    International Nuclear Information System (INIS)

    McCants, C.E.; Kendelewicz, T.; Williams, M.D.; List, R.S.; Lindau, I.; Spicer, W.E.

    1985-01-01

    The chemical and electronic properties of the Ti:GaAs interface have been studied using soft x-ray and ultraviolet photoemission spectroscopies. The Fermi level pinning position is observed to be 0.7 eV for n-type, consistent with both the Unified Defect Model and the charge transfer effects observed by Williams et. al. The interface is quite disrupted, as evidenced by shifts in both the Ga and As 3d core levels and marked changes in their lineshapes. The Ga core level moves to higher kinetic energy and shifts to a metallic-like state with increasing Ti coverages. The As core level also shifts to higher KE; in addition, as appears to diffuse through the Ti overlayer for thin (<10 monolayers) coverage. This, in addition to a change in the intensity ratio between the As 3d/sub 5/2/ and 3d/sub 3/2/ peaks suggests the formation of a Ti-arsenide, which is predicted by bulk thermodynamics. The room temperature data imply a laminar coverage, although annealing studies suggest the possibility of cluster formation with increasing temperature (0<10 monolayers). These results are also consistent with those obtained by Waldrop et. al. for Ti:GaAs(100) interfaces

  15. Synthesis, Characterization, and NIR Reflectance of Highly Dispersed NiTiO3 and NiTiO3/TiO2 Composite Pigments

    Directory of Open Access Journals (Sweden)

    Yuping Tong

    2016-01-01

    Full Text Available The highly dispersed nanostructured NiTiO3 pigments and NiTiO3/TiO2 composite pigments can be synthesized at relative low temperature. The activation energy of crystal growth of NiTiO3 during calcinations via salt-assistant combustion method is 9.35 kJ/mol. The UV-vis spectra results revealed that the absorbance decreased with the increasing of calcinations temperature due to small size effect of nanometer particles. The optical data of NiTiO3 nanocrystals were analyzed at the near-absorption edge. SEM showed that the obtained NiTiO3 nanocrystals and NiTiO3/TiO2 nanocomposite were composed of highly dispersed spherical-like and spherical particles with uniform size distribution, respectively. The chromatic properties and diffuse reflectance of samples were investigated. The obtained NiTiO3/TiO2 composite samples have higher NIR reflectance than NiTiO3 pigments.

  16. Isothermal sections of the Co-Ni-Ti system at 950 and 1 000 C

    Energy Technology Data Exchange (ETDEWEB)

    Li, Han; Jin, Zhanpeng [Central South Univ., Changsha (China). School of Materials Science and Engineering; Zhou, Peng [Hunan Univ. of Science and Technology, Xiangtan (China). Hunan Provincial Key Defense Lab. of High Temperature Wear Resisting Materials and Preparation Technology; Du, Yong [Central South Univ., Changsha (China). State Key Lab. of Powder Metallurgy

    2018-02-15

    The isothermal sections of the Co-Ni-Ti system at 950 and 1000 C were investigated experimentally. Diffusion couples were measured by electron probe microanalysis to construct the phase relations at 950 C, whereas eleven key alloys annealed at 1000 C were investigated using X-ray diffraction and electron probe microanalysis. The ternary phase, τ-(Co,Ni){sub 3}Ti (hP24-VCo{sub 3}), was observed at both temperatures. At 950 C, continuous solid solutions are formed between CoTi{sub 2} and NiTi{sub 2} as well as between CoTi and NiTi. Eight 3-phase regions, i. e. Ni{sub 3}Ti + (Co,Ni)Ti + τ, Ni{sub 3}Ti + γ-(Co,Ni) + τ, τ + c-Co{sub 2}Ti + (Co,Ni)Ti, τ + c-Co{sub 2}Ti + Co{sub 3}Ti, τ + Co{sub 3}Ti + γ-(Co,Ni), c-Co{sub 2}Ti + h-Co{sub 2}Ti + Co{sub 3}Ti, L + β-(Ti) + (Co,Ni)Ti{sub 2} and L + (Co,Ni)Ti{sub 2} + (Co,Ni)Ti, were constructed at 1000 C. Considerable ternary solubilities in Ni{sub 3}Ti, Co{sub 3}Ti and c-Co{sub 2}Ti were determined.

  17. Preparation and Mechanical Properties of TiC-Fe Cermets and TiC-Fe/Fe Bilayer Composites

    Science.gov (United States)

    Zheng, Yong; Zhou, Yang; Li, Runfeng; Wang, Jiaqi; Chen, Lulu; Li, Shibo

    2017-10-01

    TiC-Fe cermets and TiC-Fe/Fe bilayer composites consisting of a pure Fe layer and a TiC-Fe cermets layer were fabricated by hot-pressing sintering. The pure Fe layer contributes to the toughness of composites, and the TiC-Fe cermets layer endows the composites with an improved tensile strength and hardness. The effect of TiC contents (30-60 vol.%) on the mechanical properties of TiC-Fe cermets and TiC-Fe/Fe bilayer composites was investigated. Among the TiC-Fe cermets, the 40 vol.% TiC-Fe cermets possessed the highest tensile strength of 581 MPa and Vickers hardness of 5.1 GPa. The maximum fracture toughness of 17.0 MPa m1/2 was achieved for the TiC-Fe cermets with 30 vol.% TiC. For the TiC-Fe/Fe bilayer composites, the 40 vol.% TiC-Fe/Fe bilayer composite owns the maximum tensile strength of 588 MPa, which is higher than that of 40 vol.% TiC-Fe cermets. In addition, the 33.5% increment of tensile strength of 30 vol.% TiC-Fe/Fe bilayer composite comparing with the 30 vol.% TiC-Fe cermets, which is attributed to the 30 vol.% TiC-Fe/Fe bilayer composite exhibited the largest interlaminar shear strength of 335 MPa. The bilayer composites are expected to be used as wear resistance components in some heavy wear conditions.

  18. TiO2/Pt/TiO2 Sandwich Nanostructures: Towards Alcohol Sensing and UV Irradiation-Assisted Recovery

    Directory of Open Access Journals (Sweden)

    Rungroj Maolanon

    2017-01-01

    Full Text Available The TiO2/Pt/TiO2 sandwich nanostructures were synthesized by RF magnetron sputtering and demonstrated as an alcohol sensor at room-temperature operation with a fast recovery by UV irradiation. The TiO2/Pt/TiO2 layers on SiO2/Si substrate were confirmed by Auger electron spectroscopy with the interdiffusion of each layer. The TiO2/Pt/TiO2 layers on printed circuit board show the superior sensor response to alcohol in terms of the sensitivity and stability compared to the nonsandwich structure, that is, the only Pt layer or the TiO2/Pt structures. Moreover, the recovery time of the TiO2/Pt/TiO2 was improved by UV irradiation-assisted recovery. The optimum TiO2/Pt/TiO2 with thicknesses of the undermost TiO2 layer, a Pt layer, and the topmost TiO2 layer being 50 nm, 6 nm, and 5 nm, respectively, showed the highest response to ethanol down to 10 ppm. Additionally, TiO2/Pt/TiO2 shows an excellent sensing stability and exhibits different sensing selectivity among ethanol, methanol, and 2-propanol. The sensing mechanism could be attributed to the change of Pt work function during vapor adsorption. The TiO2 layer plays an important role in UV-assisted recovery by photocatalytic activity and the topmost TiO2 acts as protective layer for Pt.

  19. Pt hierarchical structure catalysts on BaTiO{sub 3}/Ti electrode for methanol and ethanol electrooxidations

    Energy Technology Data Exchange (ETDEWEB)

    Hu, Chenguo; He, Xiaoshan; Xia, Chuanhui [Department of Applied Physics, Chongqing University, Chongqing 400044 (China)

    2010-03-15

    Electrooxidations of methanol and ethanol have been investigated on different Pt catalytic titanium-supported electrodes in both acidic and alkaline media using cyclic voltammetry. BaTiO{sub 3} is used for the first time to make a nanoscaled roughness on the surface of Ti foil in order to effectively deposit Pt hierarchical structure and block foulness in solution reactions. The morphology of BaTiO{sub 3} nanocube on Ti foil, Pt catalysts deposited on BaTiO{sub 3}/Ti and Ti foil electrodes are characterized by field emission scanning electron microscopy. The results indicate that Pt nanoflowers can be effectively grown on the Ti foil covered with 1 {mu}m layer of BaTiO{sub 3} nanocubes and the catalytic oxidation behaviors to methanol and ethanol are much better than those of the Pt/Ti electrode as Pt nanoparticles can hardly be deposited on the smooth surface of the Ti foil. The Pt/BaTiO{sub 3}/Ti electrode could be adopted as excellent catalytic anode in fuel cells. (author)

  20. Compositionally graded Ti6Al4V + TiC made by direct laser fabrication using powder and wire

    International Nuclear Information System (INIS)

    Wang, F.; Mei, J.; Wu Xinhua

    2007-01-01

    Ti6Al4V reinforced with TiC has been fabricated as compositionally graded material by direct laser fabrication using TiC powder and Ti6Al4V wire which were fed simultaneously into the laser focal point. The microstructure along the length of the sample has been characterised using X-ray diffraction and scanning electron microscopy. The results show that the composition along the length changes as expected from the imposed changes in feed rate when allowance is made for the different capture efficiency for the powder and the wire. Some unmelted TiC has been observed in regions where the TiC fraction was high, but along most of the length of the samples TiC was completely melted and formed primary TiC, eutectic TiC and secondary TiC. Some preliminary tribological properties of the compositionally graded material were obtained using a sliding wear test which showed that the tribological properties of Ti6Al4V are improved by the reinforced TiC particles with the optimum frictional behaviour being found with approximately 24 vol% of TiC

  1. Thermal Degradation of Nanocomposited PMMA/TiO2 Nanocomposites

    International Nuclear Information System (INIS)

    Hafizah, Nik Noor; Mamat, Mohamad Hafiz; Rusop, Mohamad; Said, Che Mohamad Som; Abidin, Mohd Hanafiah

    2013-01-01

    The polymer nanocomposite is a new choice to conventionally filled polymers. The lack of proper binding between the filler and the polymer can lead the decrease of the thermal and other properties of the nanocomposites. In this study, the nanocomposited PMMA/TiO 2 nanocomposites were prepared using sonication and solution casting method at different weight percent TiO 2 . The aims of adding TiO 2 in the PMMA is to study the effects of TiO 2 nanofiller on the thermal properties nanocomposites. FESEM results show the higher amounts of TiO 2 in PMMA increase the rough surface morphology of the samples. Further, the Raman results reveal that the TiO 2 nanofiller were successfully intercalated into the PMMA matrix. In addition, the thermal properties of nanocomposited PMMA/TiO 2 nanocomposites were increased with the addition of TiO 2 in the PMMA.

  2. Film kahjustab Läti-Rootsi suhteid / Anu Kaupmees

    Index Scriptorium Estoniae

    Kaupmees, Anu

    2001-01-01

    Lätis näidati dokumentaalfilmi Läti prostituutidest "Buy buy Beauty" : režissöör Põl Hollender : Rootsi 2001. Läti üldsus, kaasaarvatud president, on filmis kujutatu suhtes avaldanud pahameelt

  3. Atomic Layer-Deposited TiO2 Coatings on NiTi Surface

    Science.gov (United States)

    Vokoun, D.; Racek, J.; Kadeřávek, L.; Kei, C. C.; Yu, Y. S.; Klimša, L.; Šittner, P.

    2018-02-01

    NiTi shape-memory alloys may release poisonous Ni ions at the alloys' surface. In an attempt to prepare a well-performing surface layer on an NiTi sample, the thermally grown TiO2 layer, which formed during the heat treatment of NiTi, was removed and replaced with a new TiO2 layer prepared using the atomic layer deposition (ALD) method. Using x-ray photoelectron spectroscopy, it was found that the ALD layer prepared at as low a temperature as 100 °C contained Ti in oxidation states + 4 and + 3. As for static corrosion properties of the ALD-coated NiTi samples, they further improved compared to those covered by thermally grown oxide. The corrosion rate of samples with thermally grown oxide was 1.05 × 10-5 mm/year, whereas the corrosion rate of the ALD-coated samples turned out to be about five times lower. However, cracking of the ALD coating occurred at about 1.5% strain during the superelastic mechanical loading in tension taking place via the propagation of a localized martensite band.

  4. Notas sobre a bionomia de Trichotrigona extranea Camargo & Moure (Hymenoptera, Apidae, Meliponini Notes on the bionomy of Trichotrigona extranea Camargo & Moure (Hymenoptera, Apidae, Meliponini

    Directory of Open Access Journals (Sweden)

    João M. F. Camargo

    2007-03-01

    Full Text Available Três ninhos de T. extranea, encontrados nas matas de igapó, na localidade de Samaúma, foz do rio Daraã (64°45'35" W, 0°27'7" S, AM, Brasil, são descritos e ilustrados. Este é o único lugar onde esta espécie é conhecida. Todos os ninhos estavam em ocos de ramos secos de "Tanimbuca" - Buchenavia suaveolens Eichler (Combretaceae. Dois deles compartilhavam o oco com ninhos de Frieseomelitta sp. e um era solitário. Um ninho continha 46 células de cria, 43 operárias adultas e uma rainha fisogástrica; o segundo, 240 células, 117 operárias, 25 machos e uma rainha fisogástrica; o terceiro, 260 células, 163 operárias, uma rainha fisogástrica e uma pupa de rainha. As células são construídas na forma de cacho, como em Friseomelitta, e as células de rainha são do mesmo tamanho e forma que as de operária. Não há potes de alimento - este é o único Meliponini que se conhece que não armazena alimento. Supostamente, esta espécie tem hábitos cleptobióticos. Rainhas e machos são também descritos.Three nests of T. extranea, found in "igapó" forests in the locality of Samaúma, mouth of Daraã river (64°45'35" W, 0°27'7" S, AM, Brazil, are described and illustrated. This is the only place from where this species is known. All nests were located in hollow of dried branches of "Tanimbuca" - Buchenavia suaveolens Eichler (Combretaceae. Two of them were sharing the hollow with nests of Frieseomelitta sp. and one was solitary. One nest had 46 brood cells, 43 adult workers and one physogastric queen; the second one, 240 cells, 117 adult workers, 25 males and one physogastric queen; the third one, 260 cells, 163 workers, one physogastric queen and one queen pupa. The cells are arranged in clusters, like in Frieseomelitta, and the queen cells has the same shape and size as the worker ones. There are no food pots - this is the only known Meliponini that does not store food. Supposedly, this species is cleptobiotic. Queens and males are

  5. Advances in developing TiNi nanoparticles

    International Nuclear Information System (INIS)

    Castro, A. Torres; Cuellar, E. Lopez; Mendez, U. Ortiz; Yacaman, M. Jose

    2006-01-01

    The elaboration of nanoparticles has become a field of great interest for many scientists. Nanoparticles possess different properties than those ones shown in bulk materials. Shape memory alloys have the exceptional ability to recuperate its original shape by simple heating after being 'plastically' deformed. When this process is originated, important changes in properties, as mechanical and electrical, are developed in bulk material. If there is possible to obtain nanoparticles with shape memory effects, these nanoparticles could be used in the elaboration of nanofluids with the ability to change their electrical and thermal conductivity with temperature changes, i.e., smart nanofluids. In this work, some recent results and discussion of TiNi nanoparticles obtained by ion beam milling directly from a TiNi wire with shape memory are presented. The nanoparticles obtained by this process are about 2 nm of diameter with a composition of Ti-41.0 at.% Ni. Synthesized nanoparticles elaborated by this method have an ordered structure

  6. Modeling wear of cast Ti alloys.

    Science.gov (United States)

    Chan, Kwai S; Koike, Marie; Okabe, Toru

    2007-05-01

    The wear behavior of Ti-based alloys was analyzed by considering the elastic-plastic fracture of individual alloys in response to the relevant contact stress field. Using the contact stresses as the process driving force, wear was computed as the wear rate or volume loss as a function of hardness and tensile ductility for Ti-based cast alloys containing an alpha, alpha+beta or beta microstructure with or without the intermetallic precipitates. Model predictions indicated that wear of Ti alloys increases with increasing hardness but with decreasing fracture toughness or tensile ductility. The theoretical results are compared with experimental data to elucidate the roles of microstructure in wear and contrasted against those in grindability.

  7. A new traveltime approximation for TI media

    KAUST Repository

    Stovas, Alexey; Alkhalifah, Tariq Ali

    2012-01-01

    In a transversely isotropic (TI) medium, the trade-off between inhomogeneity and anisotropy can dramatically reduce our capability to estimate anisotropy parameters. By expanding the TI eikonal equation in power series in terms of the aneliptic parameter η, we derive an efficient tool to estimate (scan) for η in a generally inhomogeneous, elliptically anisotropic background medium. For a homogeneous-tilted transversely isotropic medium, we obtain an analytic nonhyperbolic moveout equation that is accurate for large offsets. In the common case where we do not have well information and it is necessary to resolve the vertical velocity, the background medium can be assumed isotropic, and the traveltime equations becomes simpler. In all cases, the accuracy of this new TI traveltime equation exceeds previously published formulations and demonstrates how η is better resolved at small offsets when the tilt is large.

  8. A new traveltime approximation for TI media

    KAUST Repository

    Stovas, Alexey

    2012-07-01

    In a transversely isotropic (TI) medium, the trade-off between inhomogeneity and anisotropy can dramatically reduce our capability to estimate anisotropy parameters. By expanding the TI eikonal equation in power series in terms of the aneliptic parameter η, we derive an efficient tool to estimate (scan) for η in a generally inhomogeneous, elliptically anisotropic background medium. For a homogeneous-tilted transversely isotropic medium, we obtain an analytic nonhyperbolic moveout equation that is accurate for large offsets. In the common case where we do not have well information and it is necessary to resolve the vertical velocity, the background medium can be assumed isotropic, and the traveltime equations becomes simpler. In all cases, the accuracy of this new TI traveltime equation exceeds previously published formulations and demonstrates how η is better resolved at small offsets when the tilt is large.

  9. Magnetic properties of TbTiGe

    International Nuclear Information System (INIS)

    Prokes, K.; Tegus, O.; Brueck, E.; Gortenmulder, T.J.; Boer, F.R. de; Buschow, K.H.J.

    2001-01-01

    We have studied the magnetic properties of the compound TbTiGe by means of neutron diffraction in the temperature range 1.7-310 K. We also report on magnetization measurements made at different temperatures and fields. The compound TbTiGe adopts the tetragonal CeFeSi-structure type and orders antiferromagnetically at T N =286 K. The structure is collinear antiferromagnetic in the whole temperature range below T N , with the magnetic moments aligned along the tetragonal c-axis. The uncommon shape of the temperature dependence of the magnetization observed in our sample is attributed to small amounts of the ferromagnetic low-temperature modification of TbTiGe

  10. Effect of Sr/Ti Ratio on the Photocatalytic Properties of SrTiO3

    International Nuclear Information System (INIS)

    Sulaeman, U; Yin, S; Sato, T

    2011-01-01

    Since strontium titanate is a wide gap semiconductor, it requires UV light to generate the photocatalytic activities. Modification of strontium titanate to show photocatalytic activity under visible light irradiation is the essential work to efficiently utilize the sun light energy for environmental application. It is expected that the synthesis of SrTiO 3 with variation of Sr/Ti atomic ratio could induce the defect crystals having unique photocatalytic properties. The SrTiO 3 with various Sr/Ti atomic ratios were synthesized by microwave-assisted solvothermal reaction of SrCl 2 .6H 2 O and Ti(OC 3 H 7 ) 4 in KOH aqueous solutions with different atomic ratios of Sr/Ti. The products were characterized by TG-DTA, XRD and DRS. The photocatalytic activity was determined by DeNO x ability using LED lamps with the wavelengths of 627 nm (red), 530 nm (green), 445 nm (blue) and 390 nm (UV). The nanoparticles of perovskite type SrTiO 3 with the particle size of 30-40 nm were successfully synthesized. The visible light responsive photocatalytic activity was generated by adding excess amount of Sr. The photocatalytic activity in visible light could be enhanced by an increase in the Sr/Ti atomic ratio up to 1.25, indicating that the visible light responsive photocatalytic activity is due to the generation of new band gap between the conduction band and valence band of SrTiO 3 by the formation of oxygen vacancy.

  11. TiO2 and Cu/TiO2 Thin Films Prepared by SPT

    Directory of Open Access Journals (Sweden)

    S. S. Roy

    2015-12-01

    Full Text Available Titanium oxide (TiO2 and copper (Cu doped titanium oxide (Cu/TiO2 thin films have been prepared by spray pyrolysis technique. Titanium chloride (TiCl4 and copper acetate (Cu(CH3COO2.H2O were used as source of Ti and Cu. The doping concentration of Cu was varied from 1-10 wt. %. The X-ray diffraction studies show that TiO2 thin films are tetragonal structure and Cu/TiO2 thin films implies CuO has present with monoclinic structure. The optical properties of the TiO2 thin films have been investigated as a function of Cu-doping level. The optical transmission of the thin films was found to increase from 88 % to 94 % with the addition of Cu up to 8 % and then decreases for higher percentage of Cu doping. The optical band gap (Eg for pure TiO2 thin film is found to be 3.40 eV. Due to Cu doping, the band gap is shifted to lower energies and then increases further with increasing the concentration of Cu. The refractive index of the TiO2 thin films is found to be 2.58 and the variation of refractive index is observed due to Cu doped. The room temperature resistivity of the films decreases with increasing Cu doping and is found to be 27.50 - 23.76 W·cm. It is evident from the present study that the Cu doping promoted the thin film morphology and thereby it is aspect for various applications.

  12. Effect of TiB2 Pretreatment on Pt/TiB2 Catalyst Performance

    International Nuclear Information System (INIS)

    Huang, Zhen; Lin, Rui; Fan, Renjie; Fan, Qinbai; Ma, Jianxin

    2014-01-01

    Highlights: • We pretreated Titanium diboride by different acids and alkali. • We synthesis the Pt/as-pretreated TiB 2 catalysts by a colloid route. • We investigated the effects of TiB 2 Pretreatment on Pt/TiB 2 Catalyst Performance. • The BET surface area and defects on the surface have a close relationship with the deposition of Pt nanoparticles. - Abstract: Carbon support corrosion of traditional Pt/C catalyst is one of the major contributors causing poor durability of proton exchange membrane fuel cells (PEMFC). Titanium diboride (TiB 2 ) has high electrical conductivity and considerable chemical stability, which making it as a good candidate for catalyst support in PEMFC. In this work, TiB 2 was pretreated by different acid and alkali. The as-obtained samples were characterized by Ex-situ microscopy (ESM) and X-ray diffraction (XRD). The pore size distribution (PSD) was analyzed by using DFT method. The PSD shows distinct volume in mesopore regions (less than 50 nm). The TiB2 pretreated by H 2 O 2 shows the biggest BET surface area of 57 m 2 g −1 and its PSD focus on mesoporous (1.5-8 nm) region, which resulted to high dispersion and better loading of Pt particles. The Hydrogen oxidization reaction (HOR) and oxygen reduction reaction (ORR) activity was characterized by Rotating Disk Electrode (RDE). The Pt/TiB 2 prepared by H 2 O 2 -pretreated TiB 2 using the colloidal method showed better half-cell electrochemical performance. Facile synthetic for the development of Pt/TiB 2 catalysts was developed

  13. Tilapia lake virus (TiLV): Literature review

    OpenAIRE

    Jansen, Mona Dverdal; Mohan, Chadag Vishnumurthy

    2017-01-01

    Tilapia lake virus (TiLV) is an emerging infectious agent that has recently been identified in diseased tilapia on three continents. At the time of writing, scientific publications have reported TiLV in samples collected from Colombia, Ecuador, Egypt, Israel and Thailand. While the link between TiLV and disease outbreaks in Israel and Thailand are well documented, further investigations are being undertaken to determine the significance of TiLV in the other countries. Israel and Taiwan Provin...

  14. Functionalized TiO2 nanoparticle containing isocyanate groups

    International Nuclear Information System (INIS)

    Ou, Baoli; Li, Duxin; Liu, Qingquan; Zhou, Zhihua; Liao, Bo

    2012-01-01

    Functionalized TiO 2 nanoparticle containing isocyanate groups can extend the TiO 2 nanoparticle chemistry, and may promote their many potential applications such as in polymer composites and coatings. This paper describes a facile method to prepare functionalized TiO 2 nanoparticle with highly reactive isocyanate groups on its surface, via the reaction between toluene-2, 4-diisocyanate (TDI) and hydroxyl on TiO 2 nanoparticle surface. The main effect factors on the reaction of TiO 2 with TDI were studied by determining the reaction extent of hydroxyl groups on TiO 2 surface. Fourier-transformed infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) confirmed that reactive isocyanate groups were covalently attached to the TiO 2 nanoparticle surface. The dispersion of the TDI-functionalized TiO 2 nanoparticle was studied by transmission electron microscopy (TEM). Owing to the TDI molecules covalently bonded on TiO 2 nanoparticle surface, it was established that the TiO 2 nanoparticle can be uniformly dispersed in toluene, thus indicating that this functionalization method can prevent TiO 2 nanoparticle from agglomerating. -- Highlights: ► TiO 2 nanoparticle was functionalized with toluene-2, 4-diisocyanate. ► Functionalized TiO 2 nanoparticle can be uniformly dispersed in xylene. ► Compatibility of TiO 2 nanoparticle and organic solvent is significantly improved. ► TiO 2 containing isocyanate groups can extend the TiO 2 nanoparticle chemistry.

  15. Prestack exploding reflector modeling and migration in TI media

    KAUST Repository

    Wang, H.

    2014-01-01

    Prestack depth migration in anisotropic media, especially those that exhibit tilt, can be costly using reverse time migration (RTM). We present two-way spectral extrapolation of prestack exploding reflector modeling and migration (PERM) in acoustic transversely isotropic (TI) media. We construct systematic ways to evaluate phase angles and phase velocities in dip oriented TI (DTI), vertical TI (VTI) and tilted TI (TTI) media. Migration results from the Marmousi VTI model and the BP2007 TTI model show the feasibility of our approach.

  16. Instability of Hydrogenated TiO2

    Energy Technology Data Exchange (ETDEWEB)

    Nandasiri, Manjula I.; Shutthanandan, V.; Manandhar, Sandeep; Schwarz, Ashleigh M.; Oxenford, Lucas S.; Kennedy, John V.; Thevuthasan, Suntharampillai; Henderson, Michael A.

    2015-11-06

    Hydrogenated TiO2 (H-TiO2) is toted as a viable visible light photocatalyst. We report a systematic study on the thermal stability of H-implanted TiO2 using X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), Rutherford backscattering spectrometry (RBS) and nuclear reaction analysis (NRA). Protons (40 keV) implanted at a ~2 atom % level within a ~120 nm wide profile of rutile TiO2(110) were situated ~300 nm below the surface. NRA revealed that this H-profile broadened preferentially toward the surface after annealing at 373 K, dissipated out of the crystal into vacuum at 473 K, and was absent within the beam sampling depth (~800 nm) at 523 K. Photoemission showed that the surface was reduced in concert with these changes. Similar anneals had no effect on pristine TiO2(110). The facile bulk diffusivity of H in rutile, as well as its activity toward interfacial reduction, significantly limits the utilization of H-TiO2 as a photocatalyst. This work was supported by the US Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. Pacific Northwest National Laboratory (PNNL) is a multiprogram national laboratory operated for DOE by Battelle. The research was performed using the Environmental Molecular Sciences Laboratory (EMSL), a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory.

  17. 47,49Ti NMR: hyperfine interactions in oxides and metals.

    Science.gov (United States)

    Bastow, T J; Gibson, M A; Forwood, C T

    1998-10-01

    A 47,49Ti NMR characterisation is given of various polymorphs of TiO2 (anatase, rutile and brookite), Ti2O3, perovskites CaTiO3 and BaTiO3, FeTiO3, TiB2, titanium metal, the titanium aluminides Ti3Al, TiAl, TiAl2, TiAl3, and TiAg. Values of chemical or Knight shift, nuclear quadrupole coupling constant and asymmetry parameter were derived from the (1/2, -1/2) powder lineshapes. For TiB2, titanium metal, TiAl, and TiAl3, where +/- (1/2, 3/2), and higher satellite transitions were observed, a value for the axial component of the Knight shift was obtained.

  18. Morphology, deformation, and defect structures of TiCr2 in Ti-Cr alloys

    International Nuclear Information System (INIS)

    Chen, K.C.; Allen, S.M.; Livingston, J.D.

    1992-01-01

    The morphologies and defect structures of TiCr 2 in several Ti-Cr alloys have been examined by optical metallography, x-ray diffraction, and transmission electron microscopy (TEM), in order to explore the room-temperature deformability of the Laves phase TiCr 2 . The morphology of the Laves phase was found to be dependent upon alloy composition and annealing temperature. Samples deformed by compression have also been studied using TEM. Comparisons of microstructures before and after deformation suggest an increase in twin, stacking fault, and dislocation density within the Laves phase, indicating some but not extensive room-temperature deformability

  19. Fracture analysis of Ag nanobrazing of NiTi to Ti alloy

    Directory of Open Access Journals (Sweden)

    L. Quintino

    2013-09-01

    Full Text Available Dissimilar joining of shape memory alloys to Ti alloys has long been attempted by several research groups due to the foreseen potential industrial applications. However, the very dissimilar thermo-physical properties of both materials place several difficulties. Brazing can be a solution since the base materials are subjected to a less sharp thermal cycle. In the present study brazed overlap joints of 1 mm thick plates of equiatomic NiTi and Ti6Al4V were produced using nano silver based filler materials. Surfaces were analyzed to assess the type of fracture and the capability of achieving bonding and involved mechanisms are discussed.

  20. Fracture analysis of Ag nanobrazing of NiTi to Ti alloy

    Energy Technology Data Exchange (ETDEWEB)

    Quintino, L., E-mail: lquirino@ist.utl.pt [Universidade Tecnica de Lisboa (IST/UTL) (Portugal). Instituto Superior Tecnico. Dept. de Engenharia Mecanica; Liu, L., E-mail: ray.plasma@gmail.com [Tsinghua Univ., Beijing (China). Dept. of Mechanical Engineering; Hu, A.; Zhou, Y., E-mail: anming.hu@uwaterloo.ca, E-mail: nzhou@uwaterloo.ca [University of Waterloo, Ontario (Canada). Dept. of Mechanical Engineering; Miranda, R.M., E-mail: rmiranda@fct.unl.pt [Universidade Nova de Lisboa (UNIDEMI), Caparica (Portugal). Dept. de Engenharia Mecanica e Industrial

    2013-07-15

    Dissimilar joining of shape memory alloys to Ti alloys has long been attempted by several research groups due to the foreseen potential industrial applications. However, the very dissimilar thermo-physical properties of both materials place several difficulties. Brazing can be a solution since the base materials are subjected to a less sharp thermal cycle. In the present study brazed overlap joints of 1 mm thick plates of equiatomic Ni Ti and Ti6Al4V were produced using nano silver based filler materials. Surfaces were analyzed to asses the type of fracture and the capability of achieving bonding and involved mechanisms are discussed. (author)

  1. Water Adsorption on TiO2

    DEFF Research Database (Denmark)

    Hammer, Bjørk; Wendt, Stefan; Besenbacher, Flemming

    2010-01-01

    Scanning Tunneling Microscopy (STM) studies and Density Functional Theory (DFT) investigations of the interaction of water with the rutile TiO2 (110) surface are summarized. From high-resolution STM the following reactions have been revealed: water adsorption and diffusion in the Ti troughs, water...... dissociation in bridging oxygen vacancies, assembly of adsorbed water monomers into rapidly diffusing water dimers, and formation of water dimers by reduction of oxygen molecules. The STM results are rationalized based on DFT calculations, revealing the bonding geometries and reaction pathways of the water...

  2. 6th iTi Conference

    CERN Document Server

    Kampers, Gerrit; Oberlack, Martin; Wacławczyk, Marta; Talamelli, Alessandro

    2016-01-01

    This volume collects the edited and reviewed contributions presented in the 6th iTi Conference in Bertinoro, covering fundamental and applied aspects in turbulence. In the spirit of the iTi conference, the volume has been produced after the conference so that the authors had the possibility to incorporate comments and discussions raised during the meeting. In the present book the contributions have been structured according to the topics : I Theory II Wall bounded flows III Particles in flows IV Free flows V Complex flows The volume is dedicated to the memory of Prof. Konrad Bajer who prematurely passed away in Warsaw on August 29, 2014. .

  3. Gobierno de las TI para universidades

    OpenAIRE

    Fernández Martínez, Antonio; Llorens Largo, Faraón

    2011-01-01

    Entre los objetivos de esta publicación están el establecer la importancia del gobierno de las TI, describir sus fundamentos y presentar las herramientas disponibles para implementarlo en una organización. Se presenta con detalle la norma ISO 38500, COBIT y el modelo GTI4U, que se ha desarrollado para ser utilizado en el ámbito universitario. Cabe destacar que incluye una descripción detallada de cómo implementar el gobierno de las TI en una universidad. La CRUE pretende que estos conten...

  4. Obtention of Ti nanoparticles by laser ablation

    International Nuclear Information System (INIS)

    Diaz E, J.R.; Escobar A, L.; Camps, E.; Santiago, P.; Ascencio, J.

    2002-01-01

    The obtention of Ti nanoparticles around 5-30 nm diameter through the laser ablation technique is reported. The formation of nanoparticles is carried out in He atmosphere to different pressures, placing directly in Si substrates (100) and in Cu grids. The results show that the work pressure is an important parameter that allows to control the nanoparticles size. Also the plasma characterization results are presented where the Ti II is the predominant specie with an average kinetic energy of 1824 eV. (Author)

  5. The influence of Ti doping and annealing on Ce_2Ti_2O_7 flash memory devices

    International Nuclear Information System (INIS)

    Kao, Chyuan Haur; Chen, Su Zhien; Luo, Yang; Chiu, Wang Ting; Chiu, Shih Wei; Chen, I Chien; Lin, Chan-Yu; Chen, Hsiang

    2017-01-01

    Highlights: • Ce_2Ti_2O_7 flash memories have been fabricated. • Material quality can be improved by annealing. • The memory performance can be enhanced by Ti doping. • Ti doping and annealing can reinforce crystallization. - Abstract: In this research, a CeO_2 film with Ti doping was used as a trapping layer in metal oxide high-K-oxide-Si (MOHOS)-type memory devices. Since incorporation of Ti atoms into the film could fix dangling bonds and defects, the Ce_2Ti_2O_7 trapping layer with annealing treatment could have a larger memory window and a faster programming/erasing speed. To confirm the origin, multiple material analyses indicate that annealing at an appropriate temperature and Ti doping could enhance crystallization. The Ce_2Ti_2O_7-based memory device is promising for future industrial flash memory applications.

  6. Wettability between TiN,TiC Containing Carbon Composite Refractory and Molten Slag or Hot Metal

    Institute of Scientific and Technical Information of China (English)

    SHIYue-xun; LIYingand; 等

    1994-01-01

    In order to develop a new-type TiC-TiN containing carbon composite refractory so as to improve the service life of blast furnace hearth,the wettability between the carbon refractory and molten slag or metal has been mea-sured.It was indicated that the carbon refractory is wet-ted by slag(θ≤90°) when(TiC+TiN)>33.52%,The effects of TiN or TiC on wetting behavior are basi-cally identical.When the amount of TiC in the carbon com-posite refractory is greater than 60% it will be wetted by hot metal;therefore,the carbon composite refractory will be wetted by slag but not permeated by hot metal when the amount of TiC is restricted.

  7. Orthorhombic strontium titanate in BaTiO sub 3 -SrTiO sub 3 superlattices

    CERN Document Server

    Rios, S; Jiang, A Q; Scott, J F; Lü, H; Chen, Z

    2003-01-01

    It has been suggested by several authors that SrTiO sub 3 layers in SrTiO sub 3 -BaTiO sub 3 superlattices should be tetragonal and ferroelectric at ambient temperatures, like the BaTiO sub 3 layers, rather than cubic, as in bulk SrTiO sub 3 , and that free-energy minimization requires continuity of the polarization direction. A recent ab initio calculation constrained solutions to this structure. Surprisingly, our x-ray study shows that the SrTiO sub 3 layers are orthorhombic with 0.03% in-plane strain, with the BaTiO sub 3 c-axis matching the SrTiO sub 3 a- and b-axis better than the c-axis; strain energy overcomes the cost in electrostatic energy. (letter to the editor)

  8. Laser cladding of aluminium using TiB2

    CSIR Research Space (South Africa)

    Kumar, S

    2010-03-01

    Full Text Available to that of steel (5) and Tita- nium (6; 7). Previous work con- sists of an effort to make deep laser injection of TiB2 on Al or the creation of in-situ of TiB2 using other reactant particles. In-situ creation of TiB2 suffers from other side effects...

  9. 钛合金表面激光熔覆NiCrBSi(Ti)-TiC涂层%Study on laser cladding of NiCrBSi (Ti)-TiC metal-ceramiccomposite coatings on titanium alloy

    Institute of Scientific and Technical Information of China (English)

    孙荣禄; 郭立新; 董尚利; 杨德庄

    2001-01-01

    在TC4合金表面进行了激光熔覆NiCrBSi-TiC,Ti-TiC金属陶瓷复合涂层的试验,对涂层的组织和显微硬度进行了分析和测试.结果表明,NiCrBSi-TiC涂层的组织是在初晶γ-Ni和γ-Ni,Ni3B,M23(CB)6,CrB多元共晶的基底上均匀地分布着TiC颗粒,在激光熔覆过程中TiC颗粒只是边缘发生了溶解或熔化;在Ti-TiC涂层中,TiC颗粒全部溶解或熔化,冷却时以枝晶形式重新析出.NiCrBSi-TiC涂层的显微硬度(HV900~1100)明显高于Ti-TiC的涂层的显微硬度(HV500~700).

  10. Microstructural characterization of the γ-TiAl alloy samples ...

    Indian Academy of Sciences (India)

    A direct laser fabrication technique (DLF) has been used to fabricate near net shape samples of a -TiAl alloy using gas atomized Ti48A148Mn2Nb2 alloy powder as a feed stock material. The microstructures of these Ti48Al48Mn2Nb2 laser treated samples have been characterized using optical, scanning (SEM) and ...

  11. Preparation, characterization and photocatalytic activity of TiO2 ...

    Indian Academy of Sciences (India)

    Photocatalyst; TiO2 nanoparticle; polyaniline; conducting polymer; core-shell nanocomposite. 1. Introduction ..... tine TiO2 nanoparticles, HCl-doped PANI and PANI/TiO2 ..... Karim M R, Lim K T, Lee M S, Kim K and Yeum J H 2009 Synth. Met.

  12. Ab initio study of phase equilibria in TiCx

    DEFF Research Database (Denmark)

    Korzhavyi, P.A.; Pourovskii, L.V.; Hugosson, H.W.

    2002-01-01

    The phase diagram for the vacancy-ordered structures in the substoichiometric TiCx (x = 0.5-1.0) has been established from Monte Carlo simulations with the long-range pair and multisite effective interactions obtained from ab initio calculations. Three ordered superstructures of vacancies (Ti2C, Ti...

  13. The corrosion and passivity of sputtered Mg–Ti alloys

    International Nuclear Information System (INIS)

    Song, Guang-Ling; Unocic, Kinga A.; Meyer, Harry; Cakmak, Ercan; Brady, Michael P.; Gannon, Paul E.; Himmer, Phil; Andrews, Quinn

    2016-01-01

    Highlights: • A supersaturated single phase Mg–Ti alloy can be obtained by magnetron sputtering. • The anodic dissolution of Mg–Ti alloy is inhibited by Ti addition. • The alloy becomes passive when Ti content is high and the alloy has become Ti based. • The formation of a continuous thin passive film is responsible for the passivation of the alloy. - Abstract: This study explored the possibility of forming a “stainless” Mg–Ti alloy. The electrochemical behavior of magnetron-sputtered Mg–Ti alloys was measured in a NaCl solution, and the surface films on the alloys were examined by XPS, SEM and TEM. Increased corrosion resistance was observed with increased Ti content in the sputtered Mg–Ti alloys, but passive-like behavior was not reached until the Ti level (atomic %) was higher than the Mg level. The surface film that formed on sputtered Mg–Ti based alloys in NaCl solution was thick, discontinuous and non-protective, whereas a thin, continuous and protective Mg and Ti oxide film was formed on a sputtered Ti–Mg based alloy.

  14. Propene epoxidation over Au/Ti-SBA-15 catalysts

    NARCIS (Netherlands)

    Sacaliuc, E.; Beale, A.M.; Weckhuysen, B.M.; Nijhuis, T.A.

    2007-01-01

    Highly dispersed gold nanoparticles were synthesized within the channels of a mesoporous Ti-SBA-15 support, followed by thorough catalyst characterization and testing in the selective epoxidation of propene to propene oxide. For this purpose, two series of Ti-SBA-15 materials differing in their Ti

  15. 45Ti extraction using hydroxamate resin

    DEFF Research Database (Denmark)

    Gagnon, K.; Severin, Gregory; Barnhart, T. E.

    2012-01-01

    As an attractive radionuclide for positron emission tomography, this study explores the extraction and reactivity of 45Ti produced via the 45Sc(p,n)45Ti reaction on a GE PETtrace. Using a small hydroxamate column, we have demonstrated an overall recovery of >50% of 45Ti in ~1 mL of 1M oxalic acid...

  16. Danske Markets: Läti valuutarisk suureneb / Mikk Salu

    Index Scriptorium Estoniae

    Salu, Mikk, 1975-

    2009-01-01

    ti parlament hääletas vastu seaduseelnõule, mis oli osa Läti ja IMF-i vahelisest kokkuleppest. Danske Marketsi hinnangul on vähemalt Lätile laenajate vaatenurgast tegemist Läti-poolse lepingumurdmisega

  17. Grain refining efficiency of Al-Ti-C alloys

    International Nuclear Information System (INIS)

    Birol, Yuecel

    2006-01-01

    The problems associated with boride agglomeration and the poisoning effect of Zr in Zr-bearing alloys have created a big demand for boron-free grain refiners. The potential benefits of TiC as a direct nucleant for aluminium grains have thus generated a great deal of interest in TiC-bearing alloys in recent years. In Al-Ti-C grain refiners commercially available today, Al 3 Ti particles are introduced into the melt along with the TiC particles. Since the latter are claimed to nucleate α-Al directly, it is of great technological interest to see if reducing the Ti:C ratio further, i.e., increasing the C content of the grain refiner, will produce an increase in the grain refining efficiency of these alloys. A series of grain refiner samples with the Ti concentration fixed at 3% and a range of C contents between 0 and 0.75 were obtained by appropriately mixing an experimental Al-3Ti-0.75C alloy with Al-10Ti alloy and commercial purity aluminium. The grain refining efficiency of these grain refiners was assessed to investigate the role of the insoluble TiC and the soluble Al 3 Ti particles. The optimum chemistry for the Al-Ti-C grain refiners was also identified

  18. Grain refining efficiency of Al-Ti-C alloys

    Energy Technology Data Exchange (ETDEWEB)

    Birol, Yuecel [Materials Institute, Marmara Research Center, TUBITAK, 41470 Gebze, Kocaeli (Turkey)]. E-mail: yucel.birol@mam.gov.tr

    2006-09-28

    The problems associated with boride agglomeration and the poisoning effect of Zr in Zr-bearing alloys have created a big demand for boron-free grain refiners. The potential benefits of TiC as a direct nucleant for aluminium grains have thus generated a great deal of interest in TiC-bearing alloys in recent years. In Al-Ti-C grain refiners commercially available today, Al{sub 3}Ti particles are introduced into the melt along with the TiC particles. Since the latter are claimed to nucleate {alpha}-Al directly, it is of great technological interest to see if reducing the Ti:C ratio further, i.e., increasing the C content of the grain refiner, will produce an increase in the grain refining efficiency of these alloys. A series of grain refiner samples with the Ti concentration fixed at 3% and a range of C contents between 0 and 0.75 were obtained by appropriately mixing an experimental Al-3Ti-0.75C alloy with Al-10Ti alloy and commercial purity aluminium. The grain refining efficiency of these grain refiners was assessed to investigate the role of the insoluble TiC and the soluble Al{sub 3}Ti particles. The optimum chemistry for the Al-Ti-C grain refiners was also identified.

  19. DSC study of martensite transformation in TiPt alloys

    CSIR Research Space (South Africa)

    Chikosha, S

    2012-09-01

    Full Text Available Conclusions drawn from this presentation were that when SPS, HP and Press and Sinter methods were used to form TiPt phase from elemental Ti and Pt powders, Press and Sinter was less successful. Presence of Ti-rich and Pt-rich phases coexisting...

  20. Effect of TiC content on the microstructure and properties of Ti3SiC2-TiC composites in situ fabricated by spark plasma sintering

    International Nuclear Information System (INIS)

    Zhang Jianfeng; Wang Lianjun; Jiang Wan; Chen Lidong

    2008-01-01

    Spark plasma sintering technique was used to in situ fabricate high dense Ti 3 SiC 2 -TiC composites. The calculated TiC volume content from X-ray diffraction (XRD) is close to the theoretical one. It is found from fracture surface observation that TiC is about 1 μm, and Ti 3 SiC 2 is about 2-10 μm in grain size. The fracture modes consist of intergranular mainly for Ti 3 SiC 2 and transgranular fracture mainly for TiC. With the increasing of TiC volume content, Vickers hardness increases to the maximum value of 13 GPa for Ti 3 SiC 2 -40 vol.%TiC. Fracture toughness and flexural strength of the composites are also improved compared with those of monolithic Ti 3 SiC 2 except for Ti 3 SiC 2 -40 vol.%TiC composite. The main reasons for the sudden decrease of fracture toughness and flexural strength of Ti 3 SiC 2 -40 vol.%TiC composite can be attributed to the relatively lower density, some clusters of TiC in the composite and the transition of fracture mode from intergranular to transgranular. The thermal conductivities decreased with the addition of TiC. The minimum thermal conductivity is 22 W m deg. C -1 for Ti 3 SiC 2 -40 vol.%TiC composite

  1. Programas de incentivos fiscais são eficazes?: evidência a partir da avaliação do impacto do programa nota fiscal paulista sobre a arrecadação de ICMS

    Directory of Open Access Journals (Sweden)

    Enlinson Mattos

    2013-03-01

    Full Text Available O objetivo deste artigo é avaliar o impacto do Programa Nota Fiscal Paulista sobre a arrecadação do Estado de São Paulo. Observa-se um efeito positivo e significativo do Programa sobre a arrecadação real do setor terciário entre 5% e 10% comparativamente aos outros Estados do Brasil. Não é encontrado efeito robusto sobre a arrecadação real total, nem efeitos não lineares do Programa. Quando a análise é restrita somente ao Estado de São Paulo, a evidência sugere que o Programa não produziu efeitos diferenciados entre os setores. Contudo, quando o aumento de arrecadação do setor terciário é comparado com a estimativa dos prêmios concedidos tem-se um aumento de no máximo 2% da arrecadação média do setor terciário para São Paulo. Conclui-se, então, que o impacto do Programa parece ter sido limitado. É preciso levar em conta que a análise feita é bastante agregada. Uma análise mais desagregada permitiria uma melhor identificação do efeito da Nota Fiscal Paulista sobre setores específicos, mas infelizmente dados desta natureza não estão disponíveis.The purpose of this paper is to evaluate the impact of Programa Nota Fiscal Paulista on tax revenue collection by the state of São Paulo. We observe a positive and significant effect on tertiary tax collection between 5% and 10% when São Paulo is compared to the other states in Brazil. We do not find a robust effect of the Program neither on total tax collection nor in the other sectors, as well as, evidence ofa non-linear effect in time. When the analysis is restricted to the state ofSão Paulo, the estimates indicate that the Program did not increase real revenue collected by the tertiary sector compared to the other sectors. However, when the increase in tax collection is compared to the estimated raffle prizes the tax collection increases 2% of the average tax collected by the tertiary sector. We then conclude that the impact ofthe Program is very limited. It is

  2. Measurement of partial coefficients of sputtering of titanium atoms from TiC and TiN coatings

    International Nuclear Information System (INIS)

    Vychegzhanin, G.A.; Gribanov, Yu.A.; Dikij, N.P.; Zhmurin, P.N.; Letuchij, A.N.; Matyash, P.P.; Sidokur, P.I.; Shono, D.A.

    1989-01-01

    Method of laser fluorescent spectroscopy was used to measure partial coefficients of sputtering of titanium atoms from TiC and TiN coatings under irradiation by 1 keV hydrogen ions. Irradiation was conducted in a plant with reflective discharge. Investigation of damaged layer in irradiated samples was conducted. The presence of near-the-surface layer enrichment with titanium atoms was revealed both in TiC and TiN samples. 12 refs.; 4 figs

  3. Study on improved tribological properties by alloying copper to CP-Ti and Ti-6Al-4V alloy.

    Science.gov (United States)

    Wang, Song; Ma, Zheng; Liao, Zhenhua; Song, Jian; Yang, Ke; Liu, Weiqiang

    2015-12-01

    Copper alloying to titanium and its alloys is believed to show an antibacterial performance. However, the tribological properties of Cu alloyed titanium alloys were seldom studied. Ti-5Cu and Ti-6Al-4V-5Cu alloys were fabricated in the present study in order to further study the friction and wear properties of titanium alloys with Cu additive. The microstructure, composition and hardness were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscope (TEM) and hardness tester. The tribological behaviors were tested with ZrO2 counterface in 25% bovine serum using a ball-on-disc tribo-tester. The results revealed that precipitations of Ti2Cu intermetallic compounds appeared in both Ti-5Cu and Ti-6Al-4V-5Cu alloys. The tribological results showed an improvement in friction and wear resistance for both Ti-5Cu and Ti-6Al-4V-5Cu alloys due to the precipitation of Ti2Cu. The results also indicated that both CP-Ti and Ti-5Cu behaved better wear resistance than Ti-6Al-4V and Ti-6Al-4V-5Cu due to different wear mechanisms when articulated with hard zirconia. Both CP-Ti and Ti-5Cu revealed dominant adhesive wear with secondary abrasive wear mechanism while both Ti-6Al-4V and Ti-6Al-4V-5Cu showed severe abrasive wear and cracks with secondary adhesive wear mechanism due to different surface hardness integrated by their microstructures and material types. Copyright © 2015 Elsevier B.V. All rights reserved.

  4. Microstructure of two phases alloy Al3Ti/Al3Ti0.75Fe0.25

    International Nuclear Information System (INIS)

    Angeles, C.; Rosas, G.; Perez, R.

    1998-01-01

    The titanium-aluminium system presents three intermetallic compounds from those Al 3 Ti is what less attention has received. The objective of this work is to generate and characterize the microstructure of multiphase alloys nearby to Al 3 Ti compound through Fe addition as alloying. This is because it has been seen that little precipitates of Al 2 Ti phase over Al 3 Ti intermetallic compound increases its ductility. (Author)

  5. Chemically synthesized TiO2 and PANI/TiO2 thin films for ethanol sensing applications

    Science.gov (United States)

    Gawri, Isha; Ridhi, R.; Singh, K. P.; Tripathi, S. K.

    2018-02-01

    Ethanol sensing properties of chemically synthesized titanium dioxide (TiO2) and polyaniline/titanium dioxide nanocomposites (PANI/TiO2) had been performed at room temperature. In-situ oxidative polymerization process had been employed with aniline as a monomer in presence of anatase titanium dioxide nanoparticles. The prepared samples were structurally and morphologically characterized by x-ray diffraction, fourier transform infrared spectra, high resolution-transmission electron microscopy and field emission-scanning electron microscopy. The crystallinity of PANI/TiO2 nanocomposite was revealed by XRD and FTIR spectra confirmed the presence of chemical bonding between the polymer chains and metal oxide nanoparticles. HR-TEM micrographs depicted that TiO2 particles were embedded in polymer matrix, which provides an advantage over pure TiO2 nanoparticles in efficient adsorption of vapours. These images also revealed that the TiO2 nanoparticles were irregular in shape with size around 17 nm. FE-SEM studies revealed that in the porous structure of PANI/TiO2 film, the intercalation of TiO2 in PANI chains provides an advantage over pure TiO2 film for uniform interaction with ethanol vapors. The sensitivity values of prepared samples were examined towards ethanol vapours at room temperature. The PANI/TiO2 nanocomposite exhibited better sensing response and faster response-recovery examined at different ethanol concentrations ranging from 5 ppm to 20 ppm in comparison to pure TiO2 nanoparticles. The increase in vapour sensing of PANI/TiO2 sensing film as compared to pure TiO2 film had been explained in detail with the help of gas sensing mechanism of TiO2 and PANI/TiO2. This provides strong evidence that gas sensing properties of TiO2 had been considerably improved and enhanced with the addition of polymer matrix.

  6. In situ synthesized TiB-TiN reinforced Ti6Al4V alloy composite coatings: microstructure, tribological and in-vitro biocompatibility.

    Science.gov (United States)

    Das, Mitun; Bhattacharya, Kaushik; Dittrick, Stanley A; Mandal, Chitra; Balla, Vamsi Krishna; Sampath Kumar, T S; Bandyopadhyay, Amit; Manna, Indranil

    2014-01-01

    Wear resistant TiB-TiN reinforced Ti6Al4V alloy composite coatings were deposited on Ti substrate using laser based additive manufacturing technology. Ti6Al4V alloy powder premixed with 5wt% and 15wt% of boron nitride (BN) powder was used to synthesize TiB-TiN reinforcements in situ during laser deposition. Influences of laser power, scanning speed and concentration of BN on the microstructure, mechanical, in vitro tribological and biological properties of the coatings were investigated. Microstructural analysis of the composite coatings showed that the high temperature generated due to laser interaction with Ti6Al4V alloy and BN results in situ formation of TiB and TiN phases. With increasing BN concentration, from 5wt% to 15wt%, the Young's modulus of the composite coatings, measured by nanoindentation, increased from 170±5GPa to 204±14GPa. In vitro tribological tests showed significant increase in the wear resistance with increasing BN concentration. Under identical test conditions TiB-TiN composite coatings with 15wt% BN exhibited an order of magnitude less wear rate than CoCrMo alloy-a common material for articulating surfaces of orthopedic implants. Average top surface hardness of the composite coatings increased from 543±21HV to 877±75HV with increase in the BN concentration. In vitro biocompatibility and flow cytometry study showed that these composite coatings were non-toxic, exhibit similar cell-materials interactions and biocompatibility as that of commercially pure titanium (CP-Ti) samples. In summary, excellent in vitro wear resistance, high stiffness and suitable biocompatibility make these composite coatings as a potential material for load-bearing articulating surfaces towards orthopaedic implants. © 2013 Elsevier Ltd. All rights reserved.

  7. Formation of Al3Ti/Mg composite by powder metallurgy of Mg–Al–Ti system

    Directory of Open Access Journals (Sweden)

    Zi R Yang et al

    2008-01-01

    Full Text Available An in situ titanium trialuminide (Al3Ti-particle-reinforced magnesium matrix composite has been successfully fabricated by the powder metallurgy of a Mg–Al–Ti system. The reaction processes and formation mechanism for synthesizing the composite were studied by differential scanning calorimetry (DSC, x-ray diffractometry (XRD, scanning electron microscopy (SEM and energy-dispersive x-ray spectroscopy (EDS. Al3Ti particles are found to be synthesized in situ in the Mg alloy matrix. During the reaction sintering of the Mg–Al–Ti system, Al3Ti particles are formed through the reaction of liquid Al with as-dissolved Ti around the Ti particles. The formed intermetallic particles accumulate at the original sites of the Ti particles. As sintering time increases, the accumulated intermetallic particles disperse and reach a relatively homogeneous distribution in the matrix. It is found that the reaction process of the Mg–Al–Ti system is almost the same as that of the Al–Ti system. Mg also acts as a catalytic agent and a diluent in the reactions and shifts the reactions of Al and Ti to lower temperatures. An additional amount of Al is required for eliminating residual Ti and solid-solution strengthening of the Mg matrix.

  8. Ti-Mg alloy powder synthesis via mechanochemical reduction of TiO 2 by elemental magnesium

    CSIR Research Space (South Africa)

    Mushove, T

    2009-04-01

    Full Text Available This paper reports the preliminary results of an investigation on the synthesis of a Ti-Mg alloy powder through mechanochemical processing of TiO 2 and Mg powders. TiO 2 was mixed with elemental Mg according to a nominal stoichiometric composition...

  9. Formation of Al3Ti/Mg composite by powder metallurgy of Mg-Al-Ti system.

    Science.gov (United States)

    Yang, Zi R; Qi Wang, Shu; Cui, Xiang H; Zhao, Yu T; Gao, Ming J; Wei, Min X

    2008-07-01

    An in situ titanium trialuminide (Al 3 Ti)-particle-reinforced magnesium matrix composite has been successfully fabricated by the powder metallurgy of a Mg-Al-Ti system. The reaction processes and formation mechanism for synthesizing the composite were studied by differential scanning calorimetry (DSC), x-ray diffractometry (XRD), scanning electron microscopy (SEM) and energy-dispersive x-ray spectroscopy (EDS). Al 3 Ti particles are found to be synthesized in situ in the Mg alloy matrix. During the reaction sintering of the Mg-Al-Ti system, Al 3 Ti particles are formed through the reaction of liquid Al with as-dissolved Ti around the Ti particles. The formed intermetallic particles accumulate at the original sites of the Ti particles. As sintering time increases, the accumulated intermetallic particles disperse and reach a relatively homogeneous distribution in the matrix. It is found that the reaction process of the Mg-Al-Ti system is almost the same as that of the Al-Ti system. Mg also acts as a catalytic agent and a diluent in the reactions and shifts the reactions of Al and Ti to lower temperatures. An additional amount of Al is required for eliminating residual Ti and solid-solution strengthening of the Mg matrix.

  10. Microstructural evolution and wear behaviors of laser cladding Ti{sub 2}Ni/α(Ti) dual-phase coating reinforced by TiB and TiC

    Energy Technology Data Exchange (ETDEWEB)

    Song, R.; Li, J., E-mail: jacob_lijun@sina.com; Shao, J.Z.; Bai, L.L.; Chen, J.L.; Qu, C.C.

    2015-11-15

    Graphical abstract: - Highlights: • A TiC+TiB reinforced intermetallic matrix coating was fabricated by laser cladding. • The microstructural evolution of the reinforcements was analyzed. • A formula was established in term of wear loss, sliding time and applied load. • Wear behaviors were investigated by in situ continuing tests in different time intervals. • The transformation of wear mechanism at different applied loads was revealed. - Abstract: The Ti{sub 2}Ni/α(Ti) dual-phase coating reinforced by TiB and TiC was fabricated on the Ti6Al4V substrate by laser cladding. Phase constituents were confirmed by a theoretical prediction combined with X-ray diffraction (XRD) analyses. From the surface to the bottom of the coating, a regular evolution of the reinforcements’ microstructure, namely TiC{sub p}+(TiB+TiC){sub e}, (TiB+TiC){sub e} and TiB{sub p}+(TiB+TiC){sub e} (p and e were the abbreviations of primary and eutectic, respectively), was investigated by scanning electron microscopy (SEM). The coating possessed the higher microhardness than that of the substrate. An in situ dynamic method (in situ continuing tests at different time intervals) was designed to reveal wear behaviors at different wear stages. A quantitative calculation formula was established by a mathematic model to predict wear losses under different sliding time and applied loads in a definite precision. The wear mechanism was transformed from brittle debonding (at 10 N) to the joint action of brittle debonding and micro-cutting (at 20 N and 30 N) due to the microstructural evolution across the depth from the surface of the coating.

  11. Time-resolved XRD study of TiC-TiB2 composites obtained by SHS

    International Nuclear Information System (INIS)

    Contreras, L.; Turrillas, X.; Vaughan, G.B.M.; Kvick, A.; Rodriguez, M.A.

    2004-01-01

    Composites of TiC and TiB 2 were prepared by self-propagating high-temperature synthesis (SHS). Two routes were attempted; from the elements and from a mixture of anatase, boron oxide, graphite and magnesium. The reactions were monitored in situ by synchrotron X-ray diffraction (λ = 0.26102 A). The powder mixtures were compacted as cylindrical pellets and upon ignition diffraction patterns were collected every 65 ms with a CCD camera. TiC was the first phase to form, followed by TiB 2 . The reactions take place in time scales of 0.1 s. The temperature profile for the first route was established from the peak position and the known thermal expansion coefficients. The microstructure of the final products was different: particles of 10 μm for the first and submicron for the second. The viability of the second route to produce ceramic powders in a cheaper way was confirmed

  12. Ab initio calculations of PbTiO{sub 3}/SrTiO{sub 3} (001) heterostructures

    Energy Technology Data Exchange (ETDEWEB)

    Eglitis, R.I.; Piskunov, S.; Zhukovskii, Yu.F. [Institute of Solid State Physics, University of Latvia, 8 Kengaraga Str., 1063 Riga (Latvia)

    2016-12-15

    We performed ab initio calculations for the PbTiO{sub 3}/SrTiO{sub 3} (001) heterostructures. For both PbO and TiO{sub 2}-terminations of the PbTiO{sub 3} (001) thin film, augmented on the SrTiO{sub 3} (001) substrate, the magnitudes of atomic relaxations Δz increases as a function of the number of augmented monolayers. For both terminations of the augmented PbTiO{sub 3} (001) nanothin film, all upper, third and fifth monolayers are displaced inwards (Δz is negative), whereas all second, fourth and sixth monolayers are displaced outwards (Δz is positive). The B3PW calculated PbTiO{sub 3}/SrTiO{sub 3} (001) heterostructure band gaps, independently from the number of augmented layers, are always smaller than the PbTiO{sub 3} and SrTiO{sub 3} bulk band gaps. For both PbO and TiO{sub 2}-terminated PbTiO{sub 3}/SrTiO{sub 3}(001) heterostructures, their band gaps are reduced due to the increased number of PbTiO{sub 3} (001) monolayers. The band gaps of PbO-terminated augmented PbTiO{sub 3} (001) films are always larger than those for TiO{sub 2}-terminated PbTiO{sub 3} (001) thin films. The only exception is the case of 7-layer PbO-terminated and 8-layer TiO{sub 2}-terminated augmented PbTiO{sub 3} (001) thin films, where their band gaps both are equal to 2.99 eV. For each monolayer of the SrTiO{sub 3} (001) substrate, charge magnitudes always are more than several times larger, than for each monolayer in the augmented PbTiO{sub 3} (001) thin film. (copyright 2016 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  13. Multilayer (TiN, TiAlN) ceramic coatings for nuclear fuel cladding

    Energy Technology Data Exchange (ETDEWEB)

    Alat, Ece, E-mail: exa179@psu.edu [Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA 16802 (United States); Motta, Arthur T. [Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA 16802 (United States); Department of Mechanical and Nuclear Engineering, The Pennsylvania State University, University Park, PA 16802 (United States); Comstock, Robert J.; Partezana, Jonna M. [Westinghouse Electric Co., Beulah Rd, Pittsburgh, PA 1332 (United States); Wolfe, Douglas E. [Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA 16802 (United States); Applied Research Laboratory, The Pennsylvania State University, 119 Materials Research Building, University Park, PA 16802 (United States)

    2016-09-15

    In an attempt to develop an accident-tolerant fuel (ATF) that can delay the deleterious consequences of loss-of-coolant-accidents (LOCA), multilayer coatings were deposited onto ZIRLO{sup ®} coupon substrates by cathodic arc physical vapor deposition (CA-PVD). Coatings were composed of alternating TiN (top) and Ti{sub 1-x}Al{sub x}N (2-layer, 4-layer, 8-layer and 16-layer) layers. The minimum TiN top coating thickness and coating architecture were optimized for good corrosion and oxidation resistance. Corrosion tests were performed in static pure water at 360 °C and 18.7 MPa for up to 90 days. The optimized coatings showed no spallation/delamination and had a maximum of 6 mg/dm{sup 2} weight gain, which is 6 times smaller than that of a control sample of uncoated ZIRLO{sup ®} which showed a weight gain of 40.2 mg/dm{sup 2}. The optimized architecture features a ∼1 μm TiN top layer to prevent boehmite phase formation during corrosion and a TiN/TiAlN 8-layer architecture which provides the best corrosion performance. - Highlights: • The first study on multilayer TiAlN and TiN ceramic coatings on ZIRLO{sup ®} coupons. • Corrosion tests were performed at 360°C and 18.7 MPa for up to 90 days. • Coatings adhered well to the substrate, and showed no spallation/delamination. • Weight gains were six times lower than those of uncoated ZIRLO{sup ®} samples. • Longer and higher temperature corrosion tests will be discussed in a further paper.

  14. Tensile properties of neutron irradiated 316Ti and 15-15Ti steels

    International Nuclear Information System (INIS)

    Fissolo, A.; Levy, V.; Seran, J.L.; Maillard, A.; Royer, J.; Rabouille, O.

    1992-01-01

    This paper deals with the tensile behavior of CW316Ti and CW15-15Ti Phenix fuel pin cladding. The tensile tests were conducted on defueled tubes irradiated up to 115 dpa 3 in the 400-640 deg C temperature range. Test temperature corresponds essentially to irradiation temperature. The results emphasize that although irradiation induces a reduction of ductility, failure always occurs with significant plastic deformation even for the most irradiated clads. (author). 15 refs., 12 figs., 1 tab

  15. TiC growth in C fiber/Ti alloy composites during liquid infiltration

    Science.gov (United States)

    Warrier, S. G.; Lin, R. Y.

    1993-01-01

    A cylindrical model is developed for predicting the reaction zone thickness of carbon fiber-reinforced Ti-matrix composites, and good agreement is obtained between its predicted values and experimental results. The reaction-rate constant for TiC formation is estimated to be 1.5 x 10 exp -9 sq cm/sec. The model is extended to evaluate the relationship between C-coating thicknesses on SiC fibers and processing times.

  16. PLD prepared bioactive BaTiO.sub.3./sub. films on TiNb implants

    Czech Academy of Sciences Publication Activity Database

    Jelínek, Miroslav; Vaněk, Přemysl; Tolde, Z.; Buixaderas, Elena; Kocourek, Tomáš; Studnička, Václav; Drahokoupil, Jan; Petzelt, Jan; Remsa, Jan; Tyunina, Marina

    2017-01-01

    Roč. 70, Jan (2017), s. 334-339 ISSN 0928-4931 R&D Projects: GA ČR(CZ) GA15-05864S; GA ČR(CZ) GA15-01558S Institutional support: RVO:68378271 Keywords : BaTiO 3 * thin films * pld * implants * TiNb * ferroelectricity Subject RIV: BM - Solid Matter Physics ; Magnetism OBOR OECD: Condensed matter physics (including formerly solid state physics, supercond.)

  17. Ni4Ti3 precipitate structures in Ni-rich NiTi shape memory alloys

    Czech Academy of Sciences Publication Activity Database

    Holec, David; Bojda, Ondřej; Dlouhý, Antonín

    2008-01-01

    Roč. 481, Sp. Iss. (2008), s. 462-465 ISSN 0921-5093. [ESOMAT 2006. Bochum, 10.09.2006-15.09.2006] R&D Projects: GA ČR(CZ) GA106/05/0918 Institutional research plan: CEZ:AV0Z20410507 Keywords : NiTi shape memory alloys * Ni4Ti3 precipitates * Multi-step martensitic transformations Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 1.806, year: 2008

  18. Properties of TiO2 prepared by acid treatment of BaTiO3

    International Nuclear Information System (INIS)

    Okada, Kiyoshi; Yanagisawa, Tomoki; Kameshima, Yoshikazu; Nakajima, Akira

    2007-01-01

    TiO 3 powders were prepared by acid treatment of BaTiO 3 and their properties were investigated. The BaTiO 3 powder was subjected to HNO 3 in concentrations ranging from 10 -3 to 8 M at 90 deg. C for 0.5-6 h. Dissolution of BaTiO 3 and precipitation of TiO 2 occurred at acid concentrations of 2-5 M. BaTiO 3 dissolves completely to form a clear solution at reaction times of 0.5-1 h, but a rutile precipitate is formed after 2 h of acid treatment. By contrast, anatase is precipitated by adjusting the pH of the clear solution to 2-3 using NaOH or NH 4 OH solution. The rutile crystals were small and rod-shaped, consisting of many small coherent domains connected by grain boundaries with small inclination angles and edge dislocations, giving them a high specific surface area (S BET ). With increasing HNO 3 concentration, the S BET value increased from 100 to 170 m 2 /g while the crystallite size decreased from 25 to 11 nm. The anatase crystals obtained here were very small equi-axial particles with a smaller crystallite size than the rutile and S BET values of about 270 m 2 /g (higher than the rutile samples). The photocatalytic activity of these TiO 2 was determined from the decomposition rate of Methylene Blue under ultraviolet irradiation. Higher decomposition rates were obtained with larger crystallite sizes resulting from heat treatment. The maximum decomposition rates were obtained in samples heated at 500-600 deg. C. The photocatalytic activity of the TiO 2 was found to depend more strongly on the sample crystallite size than on S BET

  19. First Ti-XANES analyses of refractory inclusions from Murchison

    International Nuclear Information System (INIS)

    Simon, S.B.; Sutton, S.R.; Grossman, L.

    2009-01-01

    Ti valence in refractory phases is an important recorder of redox conditions in the early solar nebula. We report the valence of Ti in pyroxene, spinel and hibonite in spinel-hibonite and spinel-pyroxene inclusions and in a coarse hibonite grain. A system of solar composition is so reducing that Ti 3+ and Ti 4+ can coexist, making the valence of Ti a valuable indicator of f O2 conditions during formation of nebular materials. The Ti 3+ /Ti 4+ ratios observed in the Ti-rich phases fassaite and rhoenite in coarse-grained refractory inclusions from CV3 chondrites have been shown to be quantitatively consistent with formation in a gas of solar composition (log f O2 = IW-6.8), but these are the only objects in chondrites for which this is the case. Here, we report the valence of Ti in various phases in refractory inclusions from the Murchison CM2 chondrite. The second-highest temperature, major-element-bearing phase predicted to condense from a gas of solar composition, hibonite (ideally CaAl 12 O 19 ), can contain significant amounts of Ti, but the hibonite structure can have oxygen vacancies, so calculation of Ti valence from stoichiometry of electron probe analyses is not recommended for hibonite. To date, the only reported measurement of Ti valence in meteoritic hibonite was done by electron spin resonance, on coarse crystals from a Murchison hibonite-perovskite-melilite inclusion. Spinel and most of the pyroxene in CM inclusions contain too little Ti for derivation of Ti 3+ /Ti 4+ ratios from electron probe analyses. X-ray absorption near edge spectroscopy (XANES), however, allows determination of Ti valence in relatively Ti-poor phases. In the present work, we apply synchrotron microXANES to a large hibonite grain from Murchison and to spinel-hibonite (sp-hib) and spinel-pyroxene (sp-pyx) inclusions from Murchison, refractory materials whose Ti 3+ /Ti 4+ ratios have not been previously measured. Analysis of these samples allows comparison of Ti valence of (1

  20. The research of Ti-rich zone on the interface between TiCx and aluminum melt and the formation of Ti3Al in rapid solidified Al-Ti-C master alloys

    International Nuclear Information System (INIS)

    Jiang Kun; Ma Xiaoguang; Liu Xiangfa

    2009-01-01

    In the present work, the thermodynamic tendency of formation of Ti-rich zone on the interface between TiC x and aluminum melt is calculated and a high titanium concentration can exist in the zone according to the thermodynamic calculation. Rapid solidified Al-5Ti-0.5C master alloy is analyzed by X-ray diffraction (XRD) and transmission electronic microscopy (TEM). The appearance of Ti 3 Al in the master alloy results from the existence of high-concentration Ti-rich zone.

  1. Thin NiTi Films Deposited on Graphene Substrates

    Science.gov (United States)

    Hahn, S.; Schulze, A.; Böhme, M.; Hahn, T.; Wagner, M. F.-X.

    2017-03-01

    We present experimental results on the deposition of Nickel Titanium (NiTi) films on graphene substrates using a PVD magnetron sputter process. Characterization of the 2-4 micron thick NiTi films by electron microscopy, electron backscatter diffraction, and transmission electron microscopy shows that grain size and orientation of the thin NiTi films strongly depend on the type of combination of graphene and copper layers below. Our experimental findings are supported by density functional theory calculations: a theoretical estimation of the binding energies of different NiTi-graphene interfaces is in line with the experimentally determined microstructural features of the functional NiTi top layer.

  2. ADHESION OF BIOCOMPATIBLE TiNb COATING

    Directory of Open Access Journals (Sweden)

    Tomas Kolegar

    2017-06-01

    Full Text Available Preparation of a coating with a high quality requires good adhesion of the film to the substrate. The paper deals with the adhesion of biocompatible TiNb coating with different base materials. Several materials such as titanium CP grade 2, titanium alloys Ti6Al4V and stainless steel AISI 316L were measured. Testing samples were made in the shape of small discs. Those samples were coated with a TiNb layer by using the PVD method (magnetron sputtering. Onto the measured layer of TiNb an assistant cylinder was stuck using a high strength epoxy adhesive E1100S. The sample with the assistant cylinder was fixed into a special fixture and the whole assembly underwent pull-off testing for adhesion. The main result of this experiment was determining the strength needed to peel the layer and morphology and size of the breakaway. As a result, we will be able to determine the best base material and conditions where the coating will be remain intact with the base material.

  3. Laser polishing of additive manufactured Ti alloys

    Science.gov (United States)

    Ma, C. P.; Guan, Y. C.; Zhou, W.

    2017-06-01

    Laser-based additive manufacturing has attracted much attention as a promising 3D printing method for metallic components in recent years. However, surface roughness of additive manufactured components has been considered as a challenge to achieve high performance. In this work, we demonstrate the capability of fiber laser in polishing rough surface of additive manufactured Ti-based alloys as Ti-6Al-4V and TC11. Both as-received surface and laser-polished surfaces as well as cross-section subsurfaces were analyzed carefully by White-Light Interference, Confocal Microscope, Focus Ion Beam, Scanning Electron Microscopy, Energy Dispersive Spectrometer, and X-ray Diffraction. Results revealed that as-received Ti-based alloys with surface roughness more than 5 μm could be reduce to less than 1 μm through laser polishing process. Moreover, microstructure, microhardness and wear resistance of laser-polished zone was investigated in order to examine the thermal effect of laser polishing processing on the substrate of additive manufactured Ti alloys. This proof-of-concept process has the potential to effectively improve the surface roughness of additive manufactured metallic alloy by local polishing method without damage to the substrate.

  4. Asymmetric intermixing in Co/Ti bilayer

    International Nuclear Information System (INIS)

    Suele, P.; Kotis, L.; Toth, L.; Menyhard, M.; Egelhoff, W.F.

    2008-01-01

    Recently we have studied the ion mixing of mass-anisotropic bilayer and found strong asymmetry depending on the succession of the layers [P. Suele, M. Menyhard, L. Kotis, J. Labar, W.F. Egelhoff Jr., J. Appl. Phys. 101 (2007) 043502]. The finding was explained by the mass difference of the constituents. To check the validity of explanation we studied the interface broadening of Co/Ti and Ti/Co bilayers due to low-energy ion bombardment. We have applied Auger electron spectroscopy depth profiling and molecular dynamics simulation to determine the intermixing. Since the Co/Ti system is nearly mass isotropic the ballistic intermixing mechanism can be ruled out and no asymmetry is expected. In contrary to the expectation both methods showed asymmetry of intermixing at bombardment of 2 keV ion energy. The asymmetry vanishes progressively with decreasing ion energy. We suggest that atomic size-anisotropy could play some role in the enhancement of interdiffusion of Co in Ti

  5. ti kultuurileht ilmub siiski!

    Index Scriptorium Estoniae

    2002-01-01

    Pärast veebruari alguses Läti Kultuuriministeeriumi ja Kultuurkapitali Fondi tehtud otsust, mitte rahastada kultuurilehte Literatura un Maksla Latvija, puhkes väljaande ilmumist pooldav toetuste laine. 14. veebruari leht tänab toetuse eest ja teatab edasiilmumisest.

  6. Ti-Pt Alloys form mechanical milling

    CSIR Research Space (South Africa)

    Nxumalo, S

    2009-12-01

    Full Text Available C maximum in these alloys. A few researchers have studied the martensitic transformation in TiPt alloys using arc melted cast samples. In this work high temperature shape memory alloys are targeted using powder metallurgy as a processing route....

  7. Novel GIMS technique for deposition of colored Ti/TiO₂ coatings on industrial scale

    Directory of Open Access Journals (Sweden)

    Zdunek Krzysztof

    2016-03-01

    Full Text Available The aim of the present paper has been to verify the effectiveness and usefulness of a novel deposition process named GIMS (Gas Injection Magnetron Sputtering used for the flrst time for deposition of Ti/TiO₂ coatings on large area glass Substrates covered in the condition of industrial scale production. The Ti/TiO₂ coatings were deposited in an industrial System utilizing a set of linear magnetrons with the length of 2400 mm each for covering the 2000 × 3000 mm glasses. Taking into account the speciflc course of the GIMS (multipoint gas injection along the magnetron length and the scale of the industrial facility, the optical coating uniformity was the most important goal to check. The experiments on Ti/TiO₂ coatings deposited by the use of GIMS were conducted on Substrates in the form of glass plates located at the key points along the magnetrons and intentionally non-heated during any stage of the process. Measurements of the coatings properties showed that the thickness and optical uniformity of the 150 nm thick coatings deposited by GIMS in the industrial facility (the thickness differences on the large plates with 2000 mm width did not exceed 20 nm is fully acceptable form the point of view of expected applications e.g. for architectural glazing.

  8. Effect of Ti concentration on the structure and texture of SiTiOC glasses

    International Nuclear Information System (INIS)

    Tellez, L.; Rubio, J.; Valenzuela, M.A.; Rubio, F.; Oteo, J.L.

    2009-01-01

    Five different silicon-titanium organic-inorganic hybrid materials were prepared by the reaction of tetraethoxysilane, titanium tetrabutoxide and silanol-terminated polydimethylsiloxane. Si-Ti oxycarbide glasses were prepared by pyrolysis of the hybrid materials in nitrogen atmosphere in the range of 400 to 1500 deg. C. The obtained Si-Ti oxycarbide materials were characterized by Fourier Transform-Infra Red spectroscopy, X-ray-diffraction, mercury porosimetry and SEM. The study indicated that the reactivity towards water increases up to 1000 deg. C, at higher temperatures it decreases for all samples. During the pyrolysis, Ti atoms were incorporated into the silicate network leading to the formation of Si-Ti oxycarbide glasses, except with sample containing 7% of Ti which presented also the formation of β-SiC and TiC crystalline phases. The porosity was increased up to 600 deg. C and then decreased tending to disappear at 1500 deg. C. When the titanium concentration increased from 1 to 3% in the oxycarbide glass, the porosity decreased; for higher concentration, an increase in the porosity was observed.

  9. Effect of Ti concentration on the structure and texture of SiTiOC glasses

    Energy Technology Data Exchange (ETDEWEB)

    Tellez, L. [Dpt. Ing. Metalurgica. ESIQIE-Instituto Politecnico Nacional. Zacatenco, 07738 Mexico D.F. (Mexico); Rubio, J. [Instituto de Ceramica y Vidrio. C.S.I.C. Campus de la Universidad Autonoma de Madrid, Canto Blanco 28049, Madrid (Spain); Valenzuela, M.A., E-mail: mavalenz@ipn.mx [Lab. Catalisis y Materiales, ESIQIE-Instituto Politecnico Nacional. Zacatenco, 07738 Mexico D.F. (Mexico); Rubio, F.; Oteo, J.L. [Instituto de Ceramica y Vidrio. C.S.I.C. Campus de la Universidad Autonoma de Madrid, Canto Blanco 28049, Madrid (Spain)

    2009-06-15

    Five different silicon-titanium organic-inorganic hybrid materials were prepared by the reaction of tetraethoxysilane, titanium tetrabutoxide and silanol-terminated polydimethylsiloxane. Si-Ti oxycarbide glasses were prepared by pyrolysis of the hybrid materials in nitrogen atmosphere in the range of 400 to 1500 deg. C. The obtained Si-Ti oxycarbide materials were characterized by Fourier Transform-Infra Red spectroscopy, X-ray-diffraction, mercury porosimetry and SEM. The study indicated that the reactivity towards water increases up to 1000 deg. C, at higher temperatures it decreases for all samples. During the pyrolysis, Ti atoms were incorporated into the silicate network leading to the formation of Si-Ti oxycarbide glasses, except with sample containing 7% of Ti which presented also the formation of {beta}-SiC and TiC crystalline phases. The porosity was increased up to 600 deg. C and then decreased tending to disappear at 1500 deg. C. When the titanium concentration increased from 1 to 3% in the oxycarbide glass, the porosity decreased; for higher concentration, an increase in the porosity was observed.

  10. TiO2-TiO2 composite resistive humidity sensor: ethanol crosssensitivity

    International Nuclear Information System (INIS)

    Ghalamboran, Milad; Saedi, Yasin

    2016-01-01

    The fabrication method and characterization results of a TiO 2 -TiO 2 composite bead used for humidity sensing along with its negative cross-sensitivity to ethanol vapor are reported. The bead shaped resistive sample sensors are fabricated by the drop-casting of a TiO 2 slurry on two Pt wire segments. The dried bead is pre-fired at 750°C and subsequently impregnated with a Ti-based sol. The sample is ready for characterization after a thermal annealing at 600°C in air. Structurally, the bead is a composite of the micron-sized TiO 2 crystallites embedded in a matrix of nanometric TiO 2 particle aggregates. The performance of the beads as resistive humidity sensors is recorded at room temperature in standard humidity level chambers. Results evince the wide dynamic range of the sensors fabricated in the low relative humidity range. While the sensor conductance is not sensitive to ethanol vapor in dry air, in humid air, sensor's responses are negatively affected by the contaminant. (paper)

  11. Cu-Ti Formation in Nb-Ti/Cu Superconducting Strand Monitored by in situ Techniques

    CERN Document Server

    Pong, I; Pong, Ian; Gerardin, Alexandre; Scheuerlein, Christian; Bottura, Luca

    2010-01-01

    In order to investigate the high temperature exposure effect on Nb-Ti/Cu superconducting strands, as might be encountered in joining by soldering and in cabling annealing, X-ray diffraction and resistometry measurements were performed in situ during heat treatment, and complemented by conventional metallography, mechanical tests and superconducting properties measurements. Changes of the Nb-Ti nanostructure at temperatures above 300 degrees C are manifested in the degradation of critical current in an applied external magnetic field, although degradation at self field was insignificant up to 400 degrees C for several minutes. Above 500 degrees C, the formation of various Cu-Ti intermetallic compounds, due to Ti diffusion from Nb-Ti into Cu, is detected by in situ XRD albeit not resolvable by SEM-EDS. There is a ductile to brittle transition near 600 degrees C, and liquid formation is observed below 900 degrees C. The formation of Cu-Ti causes a delayed reduction of the residual resistivity ratio (RRR) and adv...

  12. Micro-Arc oxidation of Ti in a solution of sulfuric acid and Ti+3 salt

    International Nuclear Information System (INIS)

    Ragalevicius, Rimas; Stalnionis, Giedrius; Niaura, Gediminas; Jagminas, Arunas

    2008-01-01

    A comparative study was performed on the behavior of titanium electrode in a sulfuric acid solution with and without Ti +3 during micro-arc oxidation under the constant current density control regime. The composition and microstructure of the obtained micro-arc films were analyzed using scanning electron microscopy, glancing-angle X-ray diffractometry, Raman and energy-dispersive X-ray spectroscopies. We have shown that addition of a Ti +3 salt extends the region of current densities (j a ) can be used for micro-arc oxidation of Ti and results in an obvious change of sparking behavior from extensive, large and long-played sparks to numerous, small and short sparks. As a consequence, the titania films formed in the Ti +3 -containing solutions are relatively thick, more uniform, composed of almost pure crystalline anatase and rutile phases of TiO 2 , and contain a network of evenly distributed small pores. It has also been shown that these films are promising for applications in catalysis, sensors and optoelectronics. The Raman spectra indicate that an increase in the electrolysis time of titanium in the Ti +3 -containing solution leads to the increase in rutile content, as expected

  13. Titanium Matrix Composite Ti/TiN Produced by Diode Laser Gas Nitriding

    Directory of Open Access Journals (Sweden)

    Aleksander Lisiecki

    2015-01-01

    Full Text Available A high power direct diode laser, emitting in the range of near infrared radiation at wavelength 808–940 nm, was applied to produce a titanium matrix composite on a surface layer of titanium alloy Ti6Al4V by laser surface gas nitriding. The nitrided surface layers were produced as single stringer beads at different heat inputs, different scanning speeds, and different powers of laser beam. The influence of laser nitriding parameters on the quality, shape, and morphology of the surface layers was investigated. It was found that the nitrided surface layers consist of titanium nitride precipitations mainly in the form of dendrites embedded in the titanium alloy matrix. The titanium nitrides are produced as a result of the reaction between molten Ti and gaseous nitrogen. Solidification and subsequent growth of the TiN dendrites takes place to a large extent at the interface of the molten Ti and the nitrogen gas atmosphere. The direction of TiN dendrites growth is perpendicular to the surface of molten Ti. The roughness of the surface layers depends strongly on the heat input of laser nitriding and can be precisely controlled. In spite of high microhardness up to 2400 HV0.2, the surface layers are crack free.

  14. Influence of Fe underlayers on stress evolution of Ti in Ti/Fe multilayers

    Energy Technology Data Exchange (ETDEWEB)

    Wan, Li; Thompson, Gregory, E-mail: gthompson@eng.ua.edu [Department of Metallurgical Engineering, The University of Alabama, Tuscaloosa, Alabama 35487-0202 (United States)

    2016-11-15

    A series of 40–2 nm bilayer spacing Ti/Fe multilayers were sputter-deposited. As the length scale of individual Ti layers equaled to 2 nm, Ti phase transforms from a hexagonal close packed (hcp)-to-body centered cubic (bcc) crystal structures for equal layer thicknesses in Ti/Fe multilayers. Further equal reductions in bilayer spacing to less than 1 nm resulted in an additional transformation from a crystalline to amorphous structure. Atom probe tomography reveals significant intermixing between layers which contributes to the observed phase transformations. Real-time, intrinsic growth stress measurements were also performed to relate the adatom mobility to these phase transformations. For the hcp Ti/bcc Fe multilayers of equivalent volume fractions, the multilayers undergo an overall tensile stress state to a compressive stress state with decreasing bilayer thickness for the multilayers. When the above phase transformations occurred, a modest reduction in the overall compressive stress of the multilayer was noted. Depending on the Fe thickness, the Ti growth was observed to be a tensile to compressive growth change to a purely compressive growth for thinner bilayer spacing. Fe retained a tensile growth stress regardless of the bilayer spacing studied.

  15. Microstructures and Properties of Laser Clad TiC Reinforced Ti Matrix Composite Coatings%激光熔覆TiC增强Ti基复合涂层的组织与性能

    Institute of Scientific and Technical Information of China (English)

    孙耀宁

    2008-01-01

    利用激光熔覆技术在工业纯钛表面分别预置TiC、(Ti+C)、(Ti+TiC)粉末制备了TiC增强Ti基复合涂层,对复合涂层的组织与性能进行了分析和测试.结果表明:制备的涂层均由TiC增强相和α'-Ti组成;激光熔覆纯TiC涂层出现了陶瓷的分层现象,对组织和性能不利;激光熔覆(Ti+C)原位反应生成了TiC,但组织较粗大;熔覆(Ti+TiC)组织均匀致密.三种熔覆层硬度大小关系为:加(Ti+TiC)>加TiC>加(Ti+C),最高硬度分别为Hv1246、Hv1213、Hv1135,加(Ti+TiC)涂层硬度最高.导致该熔覆层硬度最高的主要原因是添加的Ti对熔覆有利,且生成了数量较多、较致密均匀的硬质TiC陶瓷相.

  16. Microstructure and wear property of the Ti5Si3/TiC reinforced Co-based coatings fabricated by laser cladding on Ti-6Al-4V

    Science.gov (United States)

    Weng, Fei; Yu, Huijun; Liu, Jianli; Chen, Chuanzhong; Dai, Jingjie; Zhao, Zhihuan

    2017-07-01

    Ti5Si3/TiC reinforced Co-based composite coatings were fabricated on Ti-6Al-4V titanium alloy by laser cladding with Co42 and SiC mixture. Microstructure and wear property of the cladding coatings with different content of SiC were investigated. During the cladding process, the original SiC dissolved and reacted with Ti forming Ti5Si3 and TiC. The complex in situ formed phases were found beneficial to the improvement of the coating property. Results indicated that the microhardness of the composite coatings was enhanced to over 3 times the substrate. The wear resistance of the coatings also showed distinct improvement (18.4-57.4 times). More SiC gave rise to better wear resistance within certain limits. However, too much SiC (20 wt%) was not good for the further improvement of the wear property.

  17. Hydrogen isotope behavior on Li2TiO3

    International Nuclear Information System (INIS)

    Olivares, Ryan; Oda, Takuji; Tanaka, Satoru; Oya, Yasuhisa; Tsuchiya, Kunihiko

    2004-01-01

    The surface nature of Li 2 TiO 3 and the adsorption behavior of water on Li 2 TiO 3 surface were studied by XPS/UPS and FT/IR. Preliminary experiments by Ar ion sputtering, heating and water exposure were conducted, and the following results were obtained. (1) By Ar sputtering, Li deficient surface was made, and Ti was reduced from Ti 4+ to Ti 3+ . (2) By heating sputtered samples over 573-673 K, Li emerged on the surface and Ti was re-oxidized to Ti 4+ . The surface -OH was removed. The valence band of Li 2 TiO 3 became similar to that of TiO 2 . (3) By water exposure at 623 K, H 2 O could be adsorbed dissociatively on the surface. LiOH was not formed. (4) The nature of Li 2 TiO 3 surface resembles that of TiO 2 , rather than Li 2 O. (author)

  18. Preparation of Ti-coated diamond particles by microwave heating

    Energy Technology Data Exchange (ETDEWEB)

    Gu, Quanchao [National Local Joint Laboratory of Engineering Application of Microwave Energy and Equipment Technology, Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming 650093 (China); Yunnan Copper Smelting and Processing Complex, Yunnan Copper (Group) CO., LTD., Kunming 650102 (China); International Joint Research Center of Advanced Preparation of Superhard Materials Field, Kunming Academician Workstation of Advanced Preparation of Superhard Materials Field, Kunming 650093 (China); Peng, Jinghui [National Local Joint Laboratory of Engineering Application of Microwave Energy and Equipment Technology, Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming 650093 (China); International Joint Research Center of Advanced Preparation of Superhard Materials Field, Kunming Academician Workstation of Advanced Preparation of Superhard Materials Field, Kunming 650093 (China); Xu, Lei, E-mail: xulei_kmust@aliyun.com [National Local Joint Laboratory of Engineering Application of Microwave Energy and Equipment Technology, Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming 650093 (China); Mechanical Engineering, University of Washington, Seattle, WA 98195 (United States); International Joint Research Center of Advanced Preparation of Superhard Materials Field, Kunming Academician Workstation of Advanced Preparation of Superhard Materials Field, Kunming 650093 (China); Srinivasakannan, C. [Chemical Engineering Department, The Petroleum Institute, P.O. Box 2533, Abu Dhabi (United Arab Emirates); and others

    2016-12-30

    Highlights: • The Ti-Coated diamond particles have been prepared using by microwave heating. • The uniform and dense coating can be produced, and the TiC species was formed. • With increases the temperature results in the thickness of coating increased. • The coating/diamond interfacial bonding strength increased with temperature increasing until 760 °C, then decreased. - Abstract: Depositing strong carbide-forming elements on diamond surface can dramatically improve the interfacial bonding strength between diamond grits and metal matrix. In the present work, investigation on the preparation of Ti-coated diamond particles by microwave heating has been conducted. The morphology, microstructure, and the chemical composition of Ti-coated diamond particles were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and energy dispersive x-ray spectrometer (EDX). The thickness of Ti coating was measured and the interfacial binding strength between Ti coating and diamond was analyzed. The results show that the surface of the diamond particles could be successfully coated with Ti, forming a uniform and continuous Ti-coated layer. The TiC was found to form between the surface of diamond particles and Ti-coated layer. The amount of TiC as well as the thickness of coating increased with increasing coating temperature, furthermore, the grain size of the coating also grew gradually. The interfacial bonding strength between coating and diamond was found to be best at the temperature of 760 °C.

  19. Preparation of Ti-coated diamond particles by microwave heating

    International Nuclear Information System (INIS)

    Gu, Quanchao; Peng, Jinghui; Xu, Lei; Srinivasakannan, C.

    2016-01-01

    Highlights: • The Ti-Coated diamond particles have been prepared using by microwave heating. • The uniform and dense coating can be produced, and the TiC species was formed. • With increases the temperature results in the thickness of coating increased. • The coating/diamond interfacial bonding strength increased with temperature increasing until 760 °C, then decreased. - Abstract: Depositing strong carbide-forming elements on diamond surface can dramatically improve the interfacial bonding strength between diamond grits and metal matrix. In the present work, investigation on the preparation of Ti-coated diamond particles by microwave heating has been conducted. The morphology, microstructure, and the chemical composition of Ti-coated diamond particles were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and energy dispersive x-ray spectrometer (EDX). The thickness of Ti coating was measured and the interfacial binding strength between Ti coating and diamond was analyzed. The results show that the surface of the diamond particles could be successfully coated with Ti, forming a uniform and continuous Ti-coated layer. The TiC was found to form between the surface of diamond particles and Ti-coated layer. The amount of TiC as well as the thickness of coating increased with increasing coating temperature, furthermore, the grain size of the coating also grew gradually. The interfacial bonding strength between coating and diamond was found to be best at the temperature of 760 °C.

  20. Amorphous surface layers in Ti-implanted Fe

    International Nuclear Information System (INIS)

    Knapp, J.A.; Follstaedt, D.M.; Picraux, S.T.

    1979-01-01

    Implanting Ti into high-purity Fe results in an amorphous surface layer which is composed of not only Fe and Ti, but also C. Implantations were carried out at room temperature over the energy range 90 to 190 keV and fluence range 1 to 2 x 10 16 at/cm 2 . The Ti-implanted Fe system has been characterized using transmission electron microscopy (TEM), ion backscattering and channeling analysis, and (d,p) nuclear reaction analysis. The amorphous layer was observed to form at the surface and grow inward with increasing Ti fluence. For an implant of 1 x 10 17 Ti/cm 2 at 180 keV the layer thickness was 150 A, while the measured range of the implanted Ti was approx. 550 A. This difference is due to the incorporation of C into the amorphous alloy by C being deposited on the surface during implantation and subsequently diffusing into the solid. Our results indicate that C is an essential constituent of the amorphous phase for Ti concentrations less than or equal to 10 at. %. For the 1 x 10 17 Ti/cm 2 implant, the concentration of C in the amorphous phase was approx. 25 at. %, while that of Ti was only approx. 3 at. %. A higher fluence implant of 2 x 10 17 Ti/cm 2 produced an amorphous layer with a lower C concentration of approx. 10 at. % and a Ti concentration of approx. 20 at. %

  1. Lifetime of {sup 44}Ti as probe for supernova models

    Energy Technology Data Exchange (ETDEWEB)

    Goerres, J; Meissner, J; Schatz, H; Stech, E; Tischhauser, P; Wiescher, M [Univ. of Notre Dame, Notre Dame, IN (United States); Bazin, D; Harkewicz, R; Hellstroem, M; Sherrill, B; Steiner, M [Michigan State Univ., East Lansing, MI (United States); Boyd, R N [Ohio State Univ., Columbus, OH (United States); Buchmann, L [TRIUMF, Vancouver, BC (Canada); Hartmann, D H [Clemson Univ., Clemson, SC (United States); Hinnefeld, J D [Indiana Univ. South Bend, South Bend, IN (United States)

    1998-06-01

    The recent observation of {sup 44}Ti radioactivity in the supernova remnant Cassiopeia A with the Compton Gamma Ray Observatory allows the determination of the absolute amount of {sup 44}Ti. This provides a test for current supernova models. The main uncertainty is the lifetime of {sup 44}Ti. We report a new measurement of the lifetime of {sup 44}Ti applying a novel technique. A mixed radioactive beam containing {sup 44}Ti as well as {sup 22}Na was implanted and the resulting {gamma}-activity was measured. This allowed the determination of the lifetime of {sup 44}Ti relative to the lifetime of {sup 22}Na, {tau} = (87.0 {+-} 1.9) y. With this lifetime, the {sup 44}Ti abundance agrees with theoretical predictions within the remaining observational uncertainties. (orig.)

  2. Fracture toughness of Ti-Al3Ti-Al-Al3Ti laminate composites under static and cyclic loading conditions

    Science.gov (United States)

    Patselov, A. M.; Gladkovskii, S. V.; Lavrikov, R. D.; Kamantsev, I. S.

    2015-10-01

    The static and cyclic fracture toughnesses of a Ti-Al3Ti-Al-Al3Ti laminate composite material containing at most 15 vol % intermetallic compound are studied. Composite specimens are prepared by terminating reaction sintering of titanium and aluminum foils under pressure. The fracture of the titanium layers is quasi-cleavage during cyclic crack growth and is ductile during subsequent static loading.

  3. Microstructural studies and wear assessments of Ti/TiC surface composite coatings on commercial pure Ti produced by titanium cored wires and TIG process

    Energy Technology Data Exchange (ETDEWEB)

    Monfared, A., E-mail: amirmonfared25@yahoo.com [Department of Materials Science and Engineering, Sharif University of Technology, Tehran (Iran, Islamic Republic of); Kokabi, A.H.; Asgari, S. [Department of Materials Science and Engineering, Sharif University of Technology, Tehran (Iran, Islamic Republic of)

    2013-01-15

    Tungsten Inert Gas (TIG) process and titanium cored wires filled with micro size TiC particles were employed to produce surface composite coatings on commercial pure Ti substrate for wear resistance improvement. Wire drawing process was utilized to produce several cored wires from titanium strips and titanium carbide powders. Subsequently, these cored wires were melted and coated on commercial pure Ti using TIG process. This procedure was repeated at different current intensities and welding travel speeds. Composite coating tracks were found to be affected by TIG heat input. The microstructural studies using optical and scanning electron microscopy supported by X-ray diffraction showed that the surface composite coatings consisted of {alpha} Prime -Ti, spherical and dendritic TiC particles. Also, greater volume fractions of TiC particles in the coatings were found at lower heat input. A maximum microhardness value of about 1100 HV was measured which is more than 7 times higher than the substrate material. Pin-on-disk wear tests exhibited a better performance of the surface composite coatings than the untreated material which was attributed to the presence of TiC particles in the microstructure. -- Highlights: Black-Right-Pointing-Pointer Ti/TiC composite coatings were produced on the CP-Ti. Black-Right-Pointing-Pointer Titanium cored wire and TIG process were employed for production of the coatings. Black-Right-Pointing-Pointer Decreasing heat input, increased the volume fraction of TiC in the coatings. Black-Right-Pointing-Pointer The maximum microhardness obtained in the lowest heat input. Black-Right-Pointing-Pointer The wear resistance of the coatings improved due to the formation of TiC particles.

  4. Microstructural and mechanical characteristics of W–2Ti and W–1TiC processed by hot isostatic pressing

    Energy Technology Data Exchange (ETDEWEB)

    Muñoz, A., E-mail: angel.munoz@uc3m.es [Departamento de Física, Universidad Carlos III de Madrid, Avda. de la Universidad, 30, E28911 Leganés (Spain); Savoini, B. [Departamento de Física, Universidad Carlos III de Madrid, Avda. de la Universidad, 30, E28911 Leganés (Spain); Tejado, E. [Departamento de Ciencia de Materiales, E.T.S. I. de Ingenieros de Caminos, Canales y Puertos, Universidad Politécnica de Madrid, E28040 Madrid (Spain); Centro Nacional de Investigaciones Metalúrgicas (C.S.I.C), Av. Gregorio del Amo, 8, E2840 Madrid (Spain); Monge, M.A. [Departamento de Física, Universidad Carlos III de Madrid, Avda. de la Universidad, 30, E28911 Leganés (Spain); Pastor, J.Y. [Departamento de Ciencia de Materiales, E.T.S. I. de Ingenieros de Caminos, Canales y Puertos, Universidad Politécnica de Madrid, E28040 Madrid (Spain); Pareja, R. [Departamento de Física, Universidad Carlos III de Madrid, Avda. de la Universidad, 30, E28911 Leganés (Spain)

    2014-12-15

    W–2Ti and W–1TiC alloys were produced by mechanical alloying and consolidation by hot isostatic pressing. The composition and microstructural characteristics of these alloys were studied by X-ray diffraction, energy dispersion spectroscopy and scanning electron microscopy. The mechanical behavior of the consolidated alloys was characterized by microhardness measurements and three point bending tests. The mechanical characteristics of the W–2Ti alloy appear to be related to solution hardening. In W–1TiC, the residual porosity should be responsible for the poor behavior observed in comparison with W–2Ti.

  5. Microstructural and mechanical characteristics of W–2Ti and W–1TiC processed by hot isostatic pressing

    International Nuclear Information System (INIS)

    Muñoz, A.; Savoini, B.; Tejado, E.; Monge, M.A.; Pastor, J.Y.; Pareja, R.

    2014-01-01

    W–2Ti and W–1TiC alloys were produced by mechanical alloying and consolidation by hot isostatic pressing. The composition and microstructural characteristics of these alloys were studied by X-ray diffraction, energy dispersion spectroscopy and scanning electron microscopy. The mechanical behavior of the consolidated alloys was characterized by microhardness measurements and three point bending tests. The mechanical characteristics of the W–2Ti alloy appear to be related to solution hardening. In W–1TiC, the residual porosity should be responsible for the poor behavior observed in comparison with W–2Ti

  6. Microstructure and high temperature oxidation resistance of in-situ synthesized TiN/Ti_3Al intermetallic composite coatings on Ti6Al4V alloy by laser cladding process

    International Nuclear Information System (INIS)

    Liu, Hongxi; Zhang, Xiaowei; Jiang, Yehua; Zhou, Rong

    2016-01-01

    High temperature anti-oxidation TiN/Ti_3Al intermetallic composite coatings were fabricated with the powder and AlN powder on Ti6Al4V titanium alloy surface by 6 kW transverse-flow CO_2 laser apparatus. The chemical composition, morphology and microstructure of the TiN/Ti_3Al composite coatings were characterized by optical microscopy (OM), scanning electron microscopy (SEM), X-ray diffraction (XRD) and energy dispersive spectrometer (EDS). In order to evaluate the high temperature oxidation resistance of TiN/Ti_3Al coating, the isothermal oxidation test was performed in a high temperature resistance furnace at 600 °C and 800 °C, respectively. The result shows that the composite coating has a rapidly solidified fine microstructure consisting of TiN primary phase (granular-like, flake-like or dendrites), with an even distribution in Ti_3Al matrix. It indicates that a physical and chemical reaction between Ti powder and AlN powder has completely occurred under the laser irradiation condition. In addition, the microhardness of the TiN/Ti3Al intermetallic composite coating is 3.4 times higher than that of the Ti6Al4V alloy substrate and reaches 844 HV_0_._2. The high temperature oxidation behavior test reveals that the high temperature oxidation resistance of TiN/Ti_3Al composite coating is much better than that of titanium alloy substrate. The excellent high temperature oxidation resistance of TiN/Ti_3Al intermetallic composite coating is attributed to the formation of reinforced phases TiN, Al_2O_3 and TiO_2. The laser cladding TiN/Ti_3Al intermetallic composite coating is anticipated to be a promising high temperature oxidation resistance coating for Ti6Al4V alloy. - Highlights: • In-situ TiN/Ti_3Al composite coating was synthesized on Ti6Al4V alloy by laser cladding. • The influence of Ti and AlN molar ratio on the microstructure of the coating was studied. • The TiN/Ti_3Al intermetallic coating is mainly composed of α-Ti, TiN and Ti_3Al phases. • The

  7. Ti and N adatom descent pathways to the terrace from atop two-dimensional TiN/TiN(001) islands

    Energy Technology Data Exchange (ETDEWEB)

    Edström, D., E-mail: daned@ifm.liu.se [Department of Physics, Chemistry and Biology (IFM), Linköping University, SE-58183 Linköping (Sweden); Sangiovanni, D.G.; Hultman, L.; Chirita, V. [Department of Physics, Chemistry and Biology (IFM), Linköping University, SE-58183 Linköping (Sweden); Petrov, I.; Greene, J.E. [Department of Physics, Chemistry and Biology (IFM), Linköping University, SE-58183 Linköping (Sweden); Frederick Seitz Materials Research Laboratory and the Materials Science Department, University of Illinois at Urbana-Champaign, Urbana, IL 61801 (United States)

    2014-05-02

    We use classical molecular dynamics and the modified embedded atom method to determine residence times and descent pathways of Ti and N adatoms on square, single-atom-high, TiN islands on TiN(001). Simulations are carried out at 1000 K, which is within the optimal range for TiN(001) epitaxial growth. Results show that the frequency of descent events, and overall adatom residence times, depend strongly on both the TiN(001) diffusion barrier for each species as well as the adatom island-edge location immediately prior to descent. Ti adatoms, with a low diffusion barrier, rapidly move toward the island periphery, via funneling, where they diffuse along upper island edges. The primary descent mechanism for Ti adatoms is via push-out/exchange with Ti island-edge atoms, a process in which the adatom replaces an island edge atom by moving down while pushing the edge atom out onto the terrace to occupy an epitaxial position along the island edge. Double push-out events are also observed for Ti adatoms descending at N corner positions. N adatoms, with a considerably higher diffusion barrier on TiN(001), require much longer times to reach island edges and, consequently, have significantly longer residence times. N adatoms are found to descend onto the terrace by direct hopping over island edges and corner atoms, as well as by concerted push-out/exchange with N atoms adjacent to Ti corners. For both adspecies, we also observe several complex adatom/island interactions, before and after descent onto the terrace, including two instances of Ti island-atom ascent onto the island surface. - Highlights: • We use classical molecular dynamics to model Ti and N adatom migration on TiN(001) islands. • N adatoms remain on islands significantly longer than Ti adatoms. • Ti adatoms descend via push-out/exchange, N adatoms primarily by direct hops. • N adatoms act as precursors for multilayer formation and surface roughening.

  8. Ti and N adatom descent pathways to the terrace from atop two-dimensional TiN/TiN(001) islands

    International Nuclear Information System (INIS)

    Edström, D.; Sangiovanni, D.G.; Hultman, L.; Chirita, V.; Petrov, I.; Greene, J.E.

    2014-01-01

    We use classical molecular dynamics and the modified embedded atom method to determine residence times and descent pathways of Ti and N adatoms on square, single-atom-high, TiN islands on TiN(001). Simulations are carried out at 1000 K, which is within the optimal range for TiN(001) epitaxial growth. Results show that the frequency of descent events, and overall adatom residence times, depend strongly on both the TiN(001) diffusion barrier for each species as well as the adatom island-edge location immediately prior to descent. Ti adatoms, with a low diffusion barrier, rapidly move toward the island periphery, via funneling, where they diffuse along upper island edges. The primary descent mechanism for Ti adatoms is via push-out/exchange with Ti island-edge atoms, a process in which the adatom replaces an island edge atom by moving down while pushing the edge atom out onto the terrace to occupy an epitaxial position along the island edge. Double push-out events are also observed for Ti adatoms descending at N corner positions. N adatoms, with a considerably higher diffusion barrier on TiN(001), require much longer times to reach island edges and, consequently, have significantly longer residence times. N adatoms are found to descend onto the terrace by direct hopping over island edges and corner atoms, as well as by concerted push-out/exchange with N atoms adjacent to Ti corners. For both adspecies, we also observe several complex adatom/island interactions, before and after descent onto the terrace, including two instances of Ti island-atom ascent onto the island surface. - Highlights: • We use classical molecular dynamics to model Ti and N adatom migration on TiN(001) islands. • N adatoms remain on islands significantly longer than Ti adatoms. • Ti adatoms descend via push-out/exchange, N adatoms primarily by direct hops. • N adatoms act as precursors for multilayer formation and surface roughening

  9. Ti2Al(C, N) Solid Solution Reinforcing TiAl-Based Composites: Evolution of a Core-Shell Structure, Interfaces, and Mechanical Properties.

    Science.gov (United States)

    Song, Xiaojie; Cui, Hongzhi; Han, Ye; Ding, Lei; Song, Qiang

    2018-05-16

    In this work, Ti 2 Al(C, N) solid solution with lamellar structure-enhanced TiAl matrix composites was synthesized by vacuum arc melting, using bulk g-C 3 N 4 , Ti, and Al powders as raw materials. The phases, microstructures, interfaces, and mechanical properties were investigated. MAX phase of Ti 2 Al(C, N) solid solution with lamellar structure was formed. During the melting process, first, C 3 N 4 reacted with Ti to form Ti(C, N) by Ti + C 3 N 4 → Ti(C, N). Then Ti 2 Al(C, N) was formed by a peritectic reaction of TiAl(l) + Ti(C, N)(s) → Ti 2 Al(C, N). C 3 N 4 is the single reactant that provides C and N simultaneously to final product of Ti 2 Al(C, N). The interfaces of TiAl//Ti 2 Al(C, N) and Ti 2 Al(C, N)//Ti(C, N) display perfect orientation relationships with low misfit values. The microhardness, compressive strength, and strain of best-performing TiAl-10 mol % Ti 2 Al(C, N) composite were improved by 45%, 55.7%, and 50% compared with the TiAl alloy, respectively. Uniformly distributed Ti 2 Al(C, N) and unreacted Ti(C, N) particles contributed to the grain refinement and reinforcement of the TiAl matrix. Laminated tearing, particle pull-out, and the crack-arresting of Ti 2 Al(C, N) are crucial for the improvement in compressive strength and plasticity of the composites.

  10. Microstructure and properties of TiB2-TiB reinforced titanium matrix composite coating by laser cladding

    Science.gov (United States)

    Lin, Yinghua; Yao, Jianhua; Lei, Yongping; Fu, Hanguang; Wang, Liang

    2016-11-01

    TiB2 particle and TiB short fiber reinforced titanium matrix composite coatings were prepared utilizing in situ synthesized technique by laser cladding on the surface of Ti6Al4V alloy. Through the experiment, it was found that the surface of the single-track coatings appeared in the depression, but it can be improved by laser track overlapping. With the increase of laser power density, the amount of TiB short fiber was increased, and the distribution of TiB2 and TiB became more uniform from the top to bottom. The micro-hardness of TiB2/TiB coating showed a gradient decreasing trend, and the average micro-hardness of the coatings was two-fold higher than that of the substrate. Due to the strengthening effect of TiB2 particle and TiB short fiber, the wear volume loss of the center of the coating was approximately 30% less than that of the Ti-6Al-4V substrate, and the wear mechanism of the coating was mild fatigue particle detachment.

  11. Improvement of Ti-plasma coating on Ni-Ti shape memory alloy applying to implant materials and its evaluation

    International Nuclear Information System (INIS)

    Okuyama, Masaru; Endo, Jun; Take, Seisho; Itoi, Yasuhiko; Kambe, Satoshi

    2002-01-01

    Utilizing of Ni-Ti shape memory alloy for implant materials has been world-widely studied. it is, however, known that Ni-Ti alloy is easily attacked by chloride ion contained in body liquid. To prevent Ni dissolution, the authors tried to coat the alloy surface with titanium metal by means of plasma-spray coating method. The plasma coating films resulted in rather accelerating pitting corrosion because of their high porosity. Therefore, sealing of the porous films was required. In order to solve this problem and satisfy prolonged lifetime in the body, the authors tried to use the vacuum evaporation technique of titanium metal. Two types of Ti vacuum evaporation procedures were employed. The one was to cover a thin film on Ni-Ti alloy surface prior to massive Ti plasma spray coating. The other was to first coat plasma spray films on Ni-Ti alloy and then to cover them with vacuum evaporation films of Ti. Protective ability against pitting corrosion was examined by electrochemical polarization measurement in physiological solution and the coating films were characterized by microscopic and SEM observation and EPMA analysis. Vacuum evaporation thin films could not protect Ni-Ti alloy from pitting corrosion. In the case of plasma spray coating over the Ti vacuum evaporation thin film, the substrate Ni-Ti alloy could not be better protected. On the contrary, vacuum evaporation of Ti over the porous plasma spray coating layer remarkably improved corrosion protective performance

  12. Photoelectrochemical Water Splitting Properties of Ti-Ni-Si-O Nanostructures on Ti-Ni-Si Alloy

    Directory of Open Access Journals (Sweden)

    Ting Li

    2017-10-01

    Full Text Available Ti-Ni-Si-O nanostructures were successfully prepared on Ti-1Ni-5Si alloy foils via electrochemical anodization in ethylene glycol/glycerol solutions containing a small amount of water. The Ti-Ni-Si-O nanostructures were characterized by field-emission scanning electron microscopy (FE-SEM, energy dispersive spectroscopy (EDS, X-ray diffraction (XRD, and diffuse reflectance absorption spectra. Furthermore, the photoelectrochemical water splitting properties of the Ti-Ni-Si-O nanostructure films were investigated. It was found that, after anodization, three different kinds of Ti-Ni-Si-O nanostructures formed in the α-Ti phase region, Ti2Ni phase region, and Ti5Si3 phase region of the alloy surface. Both the anatase and rutile phases of Ti-Ni-Si-O oxide appeared after annealing at 500 °C for 2 h. The photocurrent density obtained from the Ti-Ni-Si-O nanostructure photoanodes was 0.45 mA/cm2 at 0 V (vs. Ag/AgCl in 1 M KOH solution. The above findings make it feasible to further explore excellent photoelectrochemical properties of the nanostructure-modified surface of Ti-Ni-Si ternary alloys.

  13. Effect of TiCl4 treatment on the refractive index of nanoporous TiO2 films

    Science.gov (United States)

    Lee, Jeeyoung; Lee, Myeongkyu

    2015-12-01

    We investigate the effect of TiCl4 treatment on the refractive index of a nanoporous TiO2 film. A nanoparticulate TiO2 film prepared on a glass substrate was immersed in a TiCl4 aqueous solution. The subsequent reaction of TiCl4 with H2O produces TiO2 and thus modifies the density and the refractive index of the film. With increasing TiCl4 concentration, the refractive index initially increased and then declined after being maximized (n = 2.02 at 633 nm) at 0.08 M concentration. A refractive index change as large as 0.45 could be obtained with the TiCl4 treatment, making it possible to achieve diffraction efficiency exceeding 80% in a diffraction grating-embedded TiO2 film. For high TiCl4 concentrations of 0.32 M and 0.64 M, the refractive index remained nearly unchanged. This was attributed to the limited permeability of high-viscosity TiCl4 solutions into the nanoporous films. The measured pore size distributions were in good agreement with the results of a diffraction analysis and refractive index measurement.

  14. Effect of TiO2 nano fillers on the electrical conductivity of PSAN/TiO2 polymer nanocomposites

    Science.gov (United States)

    Ningaraju, S.; Munirathnamma, L. M.; Kumar, K. V. Aneesh; Ravikumar, H. B.

    2016-05-01

    The microstructural characterization of Polystyrene co-acrylonitrile and Titanium dioxide (PSAN/TiO2) nanocomposites has been performed by Positron Annihilation Lifetime Spectroscopy. The decrease of positron lifetime parameters viz. o-Ps lifetime (τ3) and free volume size (Vf) up to 0.6 wt% of TiO2 is attributed to the filling of free volume holes by TiO2 nanoparticles. The increased free volume size (Vf) after 0.6 wt% of TiO2 indicates the formation of interface due to TiO2 nanoclusters. The variation of electrical conductivity at the lower and higher concentration of TiO2 in (PSAN/TiO2) nanocomposites is attributed to the blocking effect and space charge effect respectively.

  15. Microstructure and sound velocity of Ti-N-O synthetic inclusions in Ti-6Al-4V

    International Nuclear Information System (INIS)

    Gigliotti, M.F.X.; Gilmore, R.S.; Perocchi, L.C.

    1994-01-01

    Nitrogen and oxygen stabilize the alpha phase in titanium. Regions within Ti alloy parts containing high local levels of N and O can stabilize a hard-alpha phase. The ultrasonic properties of titanium-nitrogen-oxygen inclusions within Ti-6Al-4V (Ti64) blocks were measured and related to inclusion chemistry. Sound velocities were measured on Ti-N-O alloy samples that had been prepared by powder metallurgy and ingot-melting techniques. The contributions to sound velocity from oxygen and nitrogen contents were determined. Then, Ti64 blocks were hot isostatic pressing (HIP) bonded to contain inclusions of the Ti-N-O alloys. The signal-to-noise ratios of reflections from uncracked inclusions were found to be an increasing function of inclusion interstitial content and were related to changes in sound velocity with inclusion chemistry. Measurements were made of the reflectance of titanium-nitrogen inclusions in titanium and Ti64

  16. Numerical Simulation of Brazing TiC Cermet to Iron with TiZrNiCu Filler Metal

    Institute of Scientific and Technical Information of China (English)

    Lixia ZHANG; Jicai FENG

    2004-01-01

    The maximum thermal stress and stress concentration zones of iron/TiC cermet joint during cooling were studied in this paper. The results showed that the shear stress on iron/TiC cermet joint concentrates on the interface tip and the maximum shear stress appears on the left tip of iron/TiZrNiCu interlace. Positive tensile stress on TiC cermet undersurface concentrates on both sides of TiC cermet and its value decreases during cooling. Negative tensile stress on TiC cermet undersurface concentrates on the center of TiC cermet and its value increases during cooling. Brazing temperature has little effect on the development and maximum thermal stress.

  17. Characterization of Al-Ti phases in cycled TiF3-enhanced Na2LiAlH6

    International Nuclear Information System (INIS)

    Nakamura, Y.; Fossdal, A.; Brinks, H.W.; Hauback, B.C.

    2006-01-01

    TiF 3 -enhanced Na 2 LiAlH 6 was investigated after dehydrogenation-hydrogenation cycles by synchrotron X-ray diffraction. There was no sign of Ti after ball-milling with TiF 3 , but two types of Al-Ti phases were observed in the cycled samples. In a sample after measuring five pressure-composition isotherms in the temperature range from 170 to 250 deg. C, a fcc phase with a = 3.987 A was observed. This phase is considered to be Al 3 Ti with the L1 2 structure. Samples after one or four cycles at selected temperatures between 170 and 250 deg. C showed diffraction from another fcc phase with a ∼ 4.03 A. This indicates formation of an Al 1-y Ti y solid-solution phase with y ∼ 0.15 similar to previously reported for cycled NaAlH 4 with Ti additives

  18. Electrorheological effect of Ti-bearing blast furnace slag with different TiC contents at 1500°C

    Science.gov (United States)

    Yue, Hong-rui; Jiang, Tao; Zhang, Qiao-yi; Duan, Pei-ning; Xue, Xiang-xin

    2017-07-01

    The electrorheological properties of CaO-SiO2-Al2O3-MgO-TiO2-TiC slags were investigated to enhance understanding of the effect of TiC addition on the viscosity, yield stress, and fluid pattern of Ti-bearing slags in a direct-current electric field. The viscosities and shear stresses of 4wt% and 8wt% TiC slags were found to increase substantially with increasing electric field intensity, whereas virtually no rheological changes were observed in the 0wt% TiC slag. The Herschel-Bulkley model was applied to demonstrate that the fluid pattern of the 4wt% TiC slag was converted from that of a Newtonian fluid to that of a Bingham fluid in response to the applied electric field; and the static yield stress increased linearly with the square of the electric field intensity.

  19. Microstructure and electrochemical characterization of laser melt-deposited Ti2Ni3Si/NiTi intermetallic alloys

    International Nuclear Information System (INIS)

    Dong Lixin; Wang Huaming

    2008-01-01

    Corrosion and wear resistant Ti 2 Ni 3 Si/NiTi intermetallic alloys with Ti 2 Ni 3 Si as the reinforcing phase and the ductile NiTi as the toughening phase were designed and fabricated by the laser melt-deposition manufacturing process. Electrochemical behavior of the alloys was investigated using potentiodynamic polarization testing and electrochemical impedance spectroscopy in an NaOH solution. The results showed that the alloys have outstanding corrosion resistance due to the formation of a protective passive surface film of Ni(OH) 2 as well as the high chemical stability and strong inter-atomic bonds inherent to Ti 2 Ni 3 Si and NiTi intermetallics. The Ti 2 Ni 3 Si content has a significant influence on the microstructure of the alloys but only a slight effect on electrochemical corrosion properties

  20. Air stability and magnetic properties of GdN, TiN, and (Gd,Ti)N nanoparticles

    International Nuclear Information System (INIS)

    Si Pingzhan; Choi, C. J.; Tegus, O.; Brueck, E.; Geng, D. Y.; Zhang, Z. D.

    2008-01-01

    GdN, TiN, and (Gd,Ti)N nanoparticles were prepared by arc evaporating Gd, Ti, and Gd-Ti alloys in N 2 , respectively. Most of these nanoparticles show narrow size distribution with average diameter of 20 nm. Shell/core structure was observed in the (Gd,Ti)N nanoparticles, in which the shell was formed by surface reaction with air. (Gd,Ti)N nanoparticles are more stable than GdN nanoparticles in air due partially to the formation of the protective shell. The Curie temperature of GdN nanoparticles is lower than that of the bulk GdN. Both GdN and (Gd, Ti)N nanoparticles are difficult to reach magnetic saturation and show zero coercivity

  1. Studies on the sedimentation and agglomeration behavior of Al-Ti-B and Al-Ti-C grain refiners

    Energy Technology Data Exchange (ETDEWEB)

    Gazanion, F.; Chen, X.G.; Dupuis, C. [Alcan International Ltd., Jonquiere, PQ (Canada). Arvida Research and Development Centre

    2002-07-01

    The sedimentation and agglomeration behavior of Al-Ti-B and Al-Ti-C grain refiners in liquid aluminum has been investigated using the LiMCA and PoDFA analysis techniques in combination with metallographic examination. The widely used Al-5%Ti-1%B and Al-3%Ti-0.15%C master alloys were chosen. Two aluminum alloys, an AAlxxx (commercially pure metal) and an AA5182 (Al-4.5%Mg) alloy, were prepared with different additions of grain refiners. The difference in particle behavior in liquid aluminum for both refiners is described and briefly analyzed in terms of sensitivity to agglomeration and grain refiner performance. Experimental results indicate that, in comparison with the Al-Ti-B refiner, the Al-Ti-C refiner is detrimentally affected by long holding periods due to the decomposition of TiC particles within the melt. (orig.)

  2. Estudio bioquímico del veneno de Tityus kaderkai(Scorpiones: Buthidae con notas sobre su distribución y hábitat en el Perú

    Directory of Open Access Journals (Sweden)

    Enrique Escobar

    2013-12-01

    Full Text Available Se ha estudiado bioquímicamente el veneno del escorpión Tityus kaderkai Kovařik, 2005 del departamento de Madre de Dios. El veneno soluble contiene 47.6% de proteína y por PAGESDS muestra cinco bandas proteicas. Las proteínas del veneno fueron separadas, a partir de 12.9 mg de veneno, mediante cromatografía de intercambio catiónico en CM Sephadex C-25 con buffer acetato de amonio 0.05 M pH 7, obteniéndose 7 picos proteicos (I – VII. Los ensayos de toxicidad han permitido identificar tres toxinas que afectan a Mus musculus y que se encuentran asociadas a los picos IV, V y VII; asimismo, se ha detectado toxicidad sobre Gryllus sp. en los picos IV, V, VI y VII. Entre las actividades enzimáticas ensayadas, se ha encontrado actividad proteolítica sobre caseína en el pico I y actividad de hialuronidasa en el pico IV con una actividad específica de 205.6 μg/min/mg. Tanto en el veneno soluble como en las fracciones colectadas no se encontró actividad de fosfolipasa, anticoagulante ni hemolítica. El trabajo incluye notas sobre la distribución y el hábitat de la especie.

  3. La institucionalización del modelo tabaquero español 1580-1636: La creación del estanco del tabaco en España. Nota y discusión

    Directory of Open Access Journals (Sweden)

    Santiago de Luxán Meléndez

    2013-11-01

    Full Text Available La nota pretende analizar el contexto histórico en el que se inicia la economía tabaquera europea a principios del siglo XVII. Las decisiones sobre la producción, el comercio y la fiscalidad que este nuevo producto provoca en los estados de la época vienen motivadas por su creciente importancia como fuente de recursos públicos ante el espectacular desarrollo de su consumo. En un escenario de guerra casi permanente (Guerra de los Treinta Años, Guerras de Flandes, etc., el tabaco proporciona unos ingresos fiscales saneados a los gobiernos. En este contexto se sitúa la aparición del primer monopolio fiscal moderno, el estanco español del tabaco creado por Real Cédula de 26-XII-1636 y las consecuencias que la misma tuvo para el posterior desarrollo de una economía del tabaco en España.The note expect to analyse the historical environment at the beginning of the XVII century when the tobacco is introduced into the European economy. The production, trade and taxation on the tobacco decisions take for the governments, was driving to become importance of fiscal revenues produced by the growing consumption of that one, because the war needs expenditures drive the fiscal regulation. In this context the Spanish government establish the first fiscal monopoly by Royal Act of 26-XII-1636.

  4. Consideraciones metodológicas sobre el estudio de los núcleos urbanos en la Castilla bajomedieval : notas para un modelo teórico de análisis

    Directory of Open Access Journals (Sweden)

    Manuel Fernando Ladero Quesada

    1991-01-01

    Full Text Available Esta ponencia es fruto de las reflexiones surgidas en la elaboración de nuestra propia investigación sobre la ciudad de Zamora (ver nota 2 y de la lectura de numerosos trabajos sobre la problemática urbana y concejil que no es posible reseñar aquí. (Para una información bibliográfica reciente, véanse los excelentes trabajos y reflexiones reunidos en las Actas del II Congreso de Estudios Medievales organizado por la Fundación Sánchez Albornoz en León en septiembre de 1989 (Madrid 1990: Concejos y ciudades en la Edad Media Hispánica. Como señalaba antes, este ponencia se ciñe fundamentalmente al ámbito castellano-leonés, es por ello que parezca obligado citar algunas obras consultadas con mayor asiduidad para la elaboración de la misma.

  5. Fabrication of TiN/AlN/TiN tunnel junctions

    Energy Technology Data Exchange (ETDEWEB)

    Nakayama, Takeru; Naruse, Masato; Myoren, Hiroaki; Taino, Tohru, E-mail: taino@mail.saitama-u.ac.jp

    2016-11-15

    Highlights: • We have fabricated TiN/AlN/TiN tunnel junctions with an epitaxial layer. • TiN and AlN films were deposited by dc and rf magnetron sputtering at ambient substrate temperatures. • The junctions have a V{sub g} = 1.1 mV, J{sub c} = 0.24 A/cm{sup 2}, R{sub sg}/R{sub n} of 7.2, and low subgap leakage current of 180 nA. - Abstract: We have fabricated TiN/AlN/TiN tunnel junctions with an epitaxial layer. The critical temperature of TiN can be changed in the range from 0.5 to 5.0 K. Therefore, it is easy to set 5.0 K as the target critical temperature. When a Superconducting Tunnel Junction (STJ) is operated as a photon detector, it is necessary to cool it to within 0.1 K of the critical temperature in consideration of the noise of the thermally stimulated currents. Because 0.3 K was desirable, as for the manufacture of general purpose photon detectors, the critical temperature 5.0 K. TiN and AlN films were deposited by dc and rf magnetron sputtering in a load-lock sputtering system at ambient substrate temperatures. The junctions have a gap voltage of V{sub g} = 1.1 mV, and critical current density of J{sub c} = 0.24 A/cm{sup 2}, and R{sub sg}/R{sub n} of 7.2, and low subgap leakage current (I{sub sub}@ 500 µV = 180 nA). We report our experiment system, the manufacture method and the junction properties in this paper.

  6. Competências e habilidades cognitivas: diferentes definições dos mesmos construtos

    Directory of Open Access Journals (Sweden)

    Primi Ricardo

    2001-01-01

    Full Text Available Recentemente, os programas de avaliação implementados pelo governo brasileiro têm chamado a atenção para uma dimensão humana com uma longa tradição de pesquisa na Psicologia, as habilidades cognitivas. Neste artigo procura-se analisar o modelo conceitual de habilidades e competências subjacente ao Exame Nacional do Ensino Médio (ENEM e compará-lo com os modelos contemporâneos da inteligência humana pela ótica da psicometria e psicologia cognitiva. Embora empreguem terminologias diferentes, os modelos referem-se a dimensões comuns da capacidade humana, nomeadamente a inteligência fluida e cristalizada mas ainda faltam estudos de validade de construto para evidenciar com mais clareza o que o ENEM avalia.

  7. O outro, o mesmo: A corrida de touros espanhola como objeto da etnologia francesa entreguerras

    Directory of Open Access Journals (Sweden)

    Luís Felipe Sobral

    Full Text Available Resumo Durante a missão etnográfica e linguística Dacar-Djibuti (1931-1933, o escritor e etnógrafo Michel Leiris demonstrou interesse, em uma carta endereçada à sua esposa em Paris, em realizar uma etnografia da corrida de touros espanhola. Tal ideia jamais se concretizou. Este artigo, orientado por um raciocínio conjectural, descreve os fatores que impediriam a realização desta ideia no âmbito da etnologia francesa, caso ela fosse colocada em prática. Mas não basta para tanto compreender somente quais eram os métodos etnográficos então vigentes e a posição de Leiris diante deles; é preciso examinar também o estatuto marginal e ambíguo da Espanha tanto na epistemologia etnológica como no regime identitário europeu, dois sistemas simbólicos que se encontram profundamente imbricados.

  8. Afinal, quem é mesmo pedófilo? Who is really pedophile, after all?

    Directory of Open Access Journals (Sweden)

    Jane Felipe

    2006-06-01

    Full Text Available O presente artigo busca problematizar alguns dos aspectos pertinentes ao debate contemporâneo em torno das "novas" modalidades de experimentação dos desejos erótico-sexuais, em especial a pedofilia/o pedófilo, discutindo os modos pelos quais tais conceitos vêm sendo re-significados nos últimos anos. A partir do referencial teórico dos Estudos Culturais e dos Estudos de Gênero, numa abordagem pós-estruturalista de análise, pretendo mostrar que, apesar das tentativas de aprisionar/categorizar/ normatizar determinados comportamentos em torno da sexualidade, a partir de campos de conhecimento específicos, estes escorregam, escapam, vazam, nos sentidos que lhes são atribuídos.This article raises questions about some aspects of the contemporary debate concerning the "new" modes of experimenting erotic and sexual desires, especially pedophilia/the pedophile. It discusses the resignification of these concepts over the last years. The starting points are the Cultural Studies and the Gender Studies, in a post-structuralist analysis approach. I intend to show that, despite the attempts of confining/regulating/ categorizing certain behaviors regarding sexuality into specific fields of knowledge, they leak, slip, escape from the meanings attributed to them.

  9. Afinal, quem é mesmo pedófilo? Who is really pedophile, after all?

    OpenAIRE

    Jane Felipe

    2006-01-01

    O presente artigo busca problematizar alguns dos aspectos pertinentes ao debate contemporâneo em torno das "novas" modalidades de experimentação dos desejos erótico-sexuais, em especial a pedofilia/o pedófilo, discutindo os modos pelos quais tais conceitos vêm sendo re-significados nos últimos anos. A partir do referencial teórico dos Estudos Culturais e dos Estudos de Gênero, numa abordagem pós-estruturalista de análise, pretendo mostrar que, apesar das tentativas de aprisionar/categorizar/ ...

  10. Fantasmas de si mesmo: uma leitura demoníaca de James e de Machado

    Directory of Open Access Journals (Sweden)

    Marcelo Pen Parreira

    Full Text Available Este artigo prossegue na discussão sobre o papel do duplo no mundo desencantado da era liberal. Por meio da análise de algumas histórias de Henry James e de Machado de Assis, ele investiga a figuração do sujeito, esvaziado e iludido, assombrado por seu outro eu mutilado - imagem replicada tornada pavorosa pelo horror que o homem moderno comete contra si próprio. As narrativas de Machado, além disso, ao evocar personagens como que possuídos por vestígios de sua "herança bestial" ou por projeções de feitos mundanos (que eles metonimicamente tomam como sua essência integral, desestabilizam ainda mais o conceito de individuação. Nos dois autores, lidar com esse paradoxo também significa conduzir a narrativa a seus momentos negativos ou de falência, quando narrar deixa de ser possível.

  11. Inteligência artificial é mesmo de Spielberg e não de Kubrick

    Directory of Open Access Journals (Sweden)

    Opermann , Alvaro

    2001-01-01

    Full Text Available Steven Spielberg, como já se escreveu inúmeras vezes, é o mais proeminente representante da Nova Hollywood, a geração que também reúne Coppola, Scorsese, Paul Schrader, George Lucas, Michael Cimino, Brian De Palma, Peter Bogdanovich, William Friedkin e Terrence Malick. É a geração que, para o bem e para o mal, substituiu os remanescentes da Velha Hollywood (Robert Aldrich, Robert Wise, Mark Robson, John Huston, Billy Wilder, Don Siegel.

  12. Inteligência artificial é mesmo de Spielberg e não de Kubrick

    Directory of Open Access Journals (Sweden)

    Opermann , Alvaro

    2001-01-01

    Full Text Available Steven Spielberg, como já se escreveu inúmeras vezes, é o mais proeminente representante da Nova Hollywood, a geração que também reúne Coppola, Scorsese, Paul Schrader, George Lucas, Michael Cimino, Brian De Palma, Peter Bogdanovich, William Friedkin e Terrence Malick. É a geração que, para o bem e para o mal, substituiu os remanescentes da Velha Hollywood (Robert Aldrich, Robert Wise, Mark Robson, John Huston, Billy Wilder, Don Siegel

  13. 钛沉积工艺制备TiN/cBN和TiC/金钢石涂层颗粒%Fabrication of TiN/cBN and TiC/diamond coated particles by titanium deposition process

    Institute of Scientific and Technical Information of China (English)

    Walid M. DAOUSH; Hee S. PARK; Soon H. HONG

    2014-01-01

    Cubic boron nitride particles coated by titanium nitride (TiN/cBN) as well as diamond particles coated by titanium carbide (TiC/diamond) were prepared by Ti molten salt deposition followed by heat-treatment process. cBN or diamond particles were mixed separately with Ti powders and molten salts (KCl, NaCl and K2TiF6). The mixture was heated at 900 °C under argon atmosphere. The produced particles were heat-treated under hydrogen at 1000 °C. The morphologies and chemical compositions of the produced particles were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD) and focused ion beam (FIB). The results show that the cBN and the diamond particles are coated by nano-sized Ti layers. By heat-treatment of the Ti/cBN and TiC/diamond coated particles under hydrogen atmosphere, the deposited Ti layers were interacted by the in-situ transformation reaction with the surfaces of cBN and diamond particles and converted to titanium compounds (TiN and TiC), respectively.%用钛熔盐沉积及热处理工艺分别制备碳化钛涂覆的立方碳化硼颗粒(TiN/cBN)及碳化钛涂覆的金刚石颗粒(TiC/金刚石)。将cBN或金刚石颗粒分别与钛粉和KCl、NaCl和K2TiF6熔盐混合。将所得混合物在Ar气氛中加热至900°C,然后在H2气氛中于1000°C进行热处理。采用扫描电镜、X射线衍射和聚焦离子束技术对所制得颗粒进行表征。结果表明:cBN和金刚石颗粒表面已覆盖了纳米钛层。对Ti/cBN和TiC/金刚石涂层颗粒进行热处理后,颗粒表面沉积的Ti层与cBN和金刚石颗粒发生了原位化学反应,分别转化为钛化合物TiN和TiC。

  14. 合金元素对电弧熔炼TiC/Ti-6Al-4V复合材料中TiC生长形态的影响%Effects of Alloying Elements on Growth and Morphology of TiC in Arc-Melted TiC/Ti-6Al-4V Composites

    Institute of Scientific and Technical Information of China (English)

    曹磊; 王宏伟; 邹鹑鸣; 魏尊杰

    2010-01-01

    采用非自耗电弧熔炼制备含不同微合金元素的10vol%TiC/Ti-6Al-4V复合材料,研究不同的微量合金元素对复合材料中TiC形态的影响.结果表明,原始铸态复合材料中TiC形态主要是粗大且发达的枝晶状.而基体中加入0.3%(质量分数,下同)的Sn元素后,TiC生长被抑制,TiC形态变为细小分散的颗粒状;0.3%的Ni被加入后,增大了TiC的结晶区间,使TiC枝晶生长变得更加发达;而0.3%的Nb元素的加入,则减小了TiC的结晶区间,从而减少了初晶TiC数量,促进了共晶TiC的形成.

  15. Structural and Morphological Difference Between Ti/TiN/TiCN Coatings Grown in Multilayer and Graded Form

    International Nuclear Information System (INIS)

    Restrepo, E.; Baena, A.; Agudelo, C.; Castillo, H.; Devia, A.; Marino, A.

    2006-01-01

    Thin films can be grown in super-lattice, multilayers and graded form, having each one advantages and disadvantages. The difference between multilayer and graded coatings is the interface. In multilayers the interface is abrupt and in graded coatings it is diffuse. The interface influences many chemical and physical properties of the materials, and its choice depends on the application. Graded coatings have the advantage of having gradual properties such as thermal expansion coefficient and lattice parameter, avoiding adherence problems due to good match between their component materials. In this work the comparison between some properties of coatings grown as multilayer and graded is performed. The materials are produced using the sputtering DC technique because of its facility to control the deposition parameters and generate a slow growth. The target is a disc of titanium and the samples are made of stainless steel 304. The working gases are argon, nitrogen and methane, which are mixed according to the material to be produced, i.e. Ti layer is grown with argon, the TiN film is produced with a mixture of argon and nitrogen, and the TiCN material is obtained mixing argon, nitrogen and methane. These materials are characterized with AFM in order to determine grain size and with XPS studying the chemical composition and performing depth profiles

  16. LCAO calculations of SrTiO{sub 3} nanotubes

    Energy Technology Data Exchange (ETDEWEB)

    Evarestov, Robert; Bandura, Andrei, E-mail: re1973@re1973.spb.edu [Department of Quantum Chemistry, St. Petersburg State University, 26 Universitetsky Ave., 198504, Petrodvorets (Russian Federation)

    2011-06-23

    The large-scale first-principles simulation of the structure and stability of SrTiO{sub 3} nanotubes is performed for the first time using the periodic PBE0 LCAO method. The initial structures of the nanotubes have been obtained by the rolling up of the stoichiometric SrTiO{sub 3} slabs consisting of two or four alternating (001) SrO and TiO{sub 2} atomic planes. Nanotubes (NTs) with chiralities (n,0) and (n,n) have been studied. Two different NTs were constructed for each chirality: (I) with SrO outer shell, and (II) with TiO{sub 2} outer shell. Positions of all atoms have been optimized to obtain the most stable NT structure . In the majority of considered cases the inner or outer TiO{sub 2} shells of NT undergo a considerable reconstruction due to shrinkage or stretching of interatomic distances in the initial cubic perovskite structure. There were found two types of surface reconstruction: (1) breaking of Ti-O bonds with creating of Ti = O titanyl groups in outer surface; (2) inner surface folding due to Ti-O-Ti bending. Based on strain energy calculations the largest stability was found for (n,0) NTs with TiO{sub 2} outer shell.

  17. LCAO calculations of SrTiO3 nanotubes

    International Nuclear Information System (INIS)

    Evarestov, Robert; Bandura, Andrei

    2011-01-01

    The large-scale first-principles simulation of the structure and stability of SrTiO 3 nanotubes is performed for the first time using the periodic PBE0 LCAO method. The initial structures of the nanotubes have been obtained by the rolling up of the stoichiometric SrTiO 3 slabs consisting of two or four alternating (001) SrO and TiO 2 atomic planes. Nanotubes (NTs) with chiralities (n,0) and (n,n) have been studied. Two different NTs were constructed for each chirality: (I) with SrO outer shell, and (II) with TiO 2 outer shell. Positions of all atoms have been optimized to obtain the most stable NT structure . In the majority of considered cases the inner or outer TiO 2 shells of NT undergo a considerable reconstruction due to shrinkage or stretching of interatomic distances in the initial cubic perovskite structure. There were found two types of surface reconstruction: (1) breaking of Ti-O bonds with creating of Ti = O titanyl groups in outer surface; (2) inner surface folding due to Ti-O-Ti bending. Based on strain energy calculations the largest stability was found for (n,0) NTs with TiO 2 outer shell.

  18. Corrosion behavior of austenitic stainless steel containing Ti

    International Nuclear Information System (INIS)

    Cha, Sueng Ok; Choe, Han Cheol; Kim, Kwan Hyu

    1998-01-01

    Corrosion behavior of austenitic stainless steel containing Ti has been studied by using electrochemical techniques. The samples containing Ti from 0.1 to 1.0 wt% were solutionized at 1050 .deg. C for 1hr and then sensitized at 650 .deg. C for 5hr under argon atmosphere. Microstructure and phase analysis of the samples after heat treatment and corrosion tests were carried out by using XRD. TEM, SEM and optical microscope. The amount of δ-ferrite and TiC precipitates in matrix increased as the Ti content increased. In the sensitized samples, Cr 23 C 6 precipitates were observed at γ/δ interface. Degree Of Sensitization(DOS) was lower than 1.0 in all of the solutionized samples and the sensitized samples of Ti content above 0.4% wt% whereas the sensitized samples of Ti content lower than 0.4 wt% showed DOS higher than 1.0. Intergranular attack appeared mainly at grain boundaries in the sensitized sample containing 0.1 wt% Ti and at the γ/δ interface of the higher Ti content. In the latter, however, the attack was not so severe. Pitting potential(E pit ) and repassivation potential(E rep ) of the solutionized and sensitized samples were increased with increasing Ti content. The number and size of the pits decreased with increasing Ti content in the sensitized samples. The pits nucleated at Cr 23 C 6 site and the γ/δ interface

  19. Mechanical properties and biocompatibility of the sputtered Ti doped hydroxyapatite.

    Science.gov (United States)

    Vladescu, A; Padmanabhan, S C; Ak Azem, F; Braic, M; Titorencu, I; Birlik, I; Morris, M A; Braic, V

    2016-10-01

    The hydroxyapatite enriched with Ti were prepared as possible candidates for biomedical applications especially for implantable devices that are in direct contact to the bone. The hydroxyapatites with different Ti content were prepared by RF magnetron sputtering on Ti-6Al-4V alloy using pure hydroxyapatite and TiO2 targets. The content of Ti was modified by changing the RF power fed on TiO2 target. The XPS and FTIR analyses revealed the presence of hydroxyapatite structure. The hardness and elastic modulus of the hydroxyapatite were increased by Ti addition. After 5 days of culture, the cell viability of the Ti-6Al-4V was enhanced by depositing with undoped or doped hydroxyapatite. The Ti additions led to an increase in cell viability of hydroxyapatite, after 5 days of culture. The electron microscopy showed the presence of more cells on the surface of Ti-enriched hydroxyapatite than those observed on the surface of the uncoated alloys or undoped hydroxyapatite. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. Supramolecular photocatalyst of RGO-cyclodextrin-TiO2

    International Nuclear Information System (INIS)

    Shen, Jianfeng; Li, Na; Ye, Mingxin

    2013-01-01

    Graphical abstract: Supramolecular photocatalyst of RGO-cyclodextrin-TiO 2 was achieved, which showed high photocatalytic activity and adsorption capacity. Highlights: •Supramolecular photocatalyst of RGO-cyclodextrin-TiO 2 was achieved. •β-CD molecules acted as linkers between RGO and monodisperse TiO 2 nanoparticles. •Reduction of GO and preparation of RGO-cyclodextrin-TiO 2 was simultaneous. •The prepared RGO-cyclodextrin-TiO 2 shows high photocatalytic activity and adsorption capacity. -- Abstract: Reduced graphene oxide (RGO)/β-cyclodextrin (β-CD)/titanium oxide (TiO 2 ) supramolecular photocatalyst was synthesized with a one-pot hydrothermal method. The reducing process was accomplished with the attaching of β-CD and generation of TiO 2 . β-CD acted as a linker between RGO and monodisperse TiO 2 nanoparticles. The structure and composition of the hybrid had been characterized by Fourier transform infrared spectroscopy, Raman spectroscopy, thermal gravimetric analysis, X-ray diffraction and Transmission electron microscopy. The as-prepared RGO-CD-TiO 2 showed significant enhanced performance for phenol and Cr (VI) removal, due to the effective transfer of photo-generated electron from TiO2 to RGO and improved absorbance performance of the hybrid

  1. New Developments of Ti-Based Alloys for Biomedical Applications

    Science.gov (United States)

    Li, Yuhua; Yang, Chao; Zhao, Haidong; Qu, Shengguan; Li, Xiaoqiang; Li, Yuanyuan

    2014-01-01

    Ti-based alloys are finding ever-increasing applications in biomaterials due to their excellent mechanical, physical and biological performance. Nowdays, low modulus β-type Ti-based alloys are still being developed. Meanwhile, porous Ti-based alloys are being developed as an alternative orthopedic implant material, as they can provide good biological fixation through bone tissue ingrowth into the porous network. This paper focuses on recent developments of biomedical Ti-based alloys. It can be divided into four main sections. The first section focuses on the fundamental requirements titanium biomaterial should fulfill and its market and application prospects. This section is followed by discussing basic phases, alloying elements and mechanical properties of low modulus β-type Ti-based alloys. Thermal treatment, grain size, texture and properties in Ti-based alloys and their limitations are dicussed in the third section. Finally, the fourth section reviews the influence of microstructural configurations on mechanical properties of porous Ti-based alloys and all known methods for fabricating porous Ti-based alloys. This section also reviews prospects and challenges of porous Ti-based alloys, emphasizing their current status, future opportunities and obstacles for expanded applications. Overall, efforts have been made to reveal the latest scenario of bulk and porous Ti-based materials for biomedical applications. PMID:28788539

  2. Recovery characteristics of neutron-irradiated V-Ti alloys

    International Nuclear Information System (INIS)

    Leguey, T.; Pareja, R.

    2000-01-01

    The recovery characteristics of neutron-irradiated pure V and V-Ti alloys with 1.0 and 4.5 at.% Ti have been investigated by positron annihilation spectroscopy. Microvoid formation during irradiation at 320 K is produced in pure V and V-1Ti but not in V-4.5Ti. The results are consistent with a model of swelling inhibition induced by vacancy trapping by solute Ti during irradiation. The temperature dependencies of the parameter S in the range 8-300 K indicate a large dislocation bias for vacancies and solute Ti. This dislocation bias prevents the microvoid nucleation in V-4.5Ti, and the microvoid growth in V-1Ti, when vacancies become mobile during post-irradiation annealing treatments. A characteristic increase of the positron lifetime is found during recovery induced by isochronal annealing. It is attributed to a vacancy accumulation into the lattice of Ti oxides precipitated during cooling down, or at their matrix/precipitate interfaces. These precipitates could be produced by the decomposition of metastable phases of Ti oxides formed during post-irradiation annealing above 1000 K

  3. My Experience with Ti-Ni-Based and Ti-Based Shape Memory Alloys

    Science.gov (United States)

    Miyazaki, Shuichi

    2017-12-01

    The present author has been studying shape memory alloys including Cu-Al-Ni, Ti-Ni-based, and Ni-free Ti-based alloys since 1979. This paper reviews the present author's research results for the latter two materials since 1981. The topics on the Ti-Ni-based alloys include the achievement of superelasticity in Ti-Ni alloys through understanding of the role of microstructures consisting of dislocations and precipitates, followed by the contribution to the development of application market of shape memory effect and superelasticity, characterization of the R-phase and monoclinic martensitic transformations, clarification of the basic characteristics of fatigue properties, development of sputter-deposited shape memory thin films and fabrication of prototypes of microactuators utilizing thin films, development of high temperature shape memory alloys, and so on. The topics of Ni-free Ti-based shape memory alloys include the characterization of the orthorhombic phase martensitic transformation and related shape memory effect and superelasticity, the effects of texture, omega phase and adding elements on the martensitic transformation and shape memory properties, clarification of the unique effects of oxygen addition to induce non-linear large elasticity, Invar effect and heating-induced martensitic transformation, and so on.

  4. Effect of Ni4Ti3 precipitation on martensitic transformation in Ti-Ni

    International Nuclear Information System (INIS)

    Zhou, N.; Shen, C.; Wagner, M.F.-X.; Eggeler, G.; Mills, M.J.; Wang, Y.

    2010-01-01

    Precipitation of Ni 4 Ti 3 plays a critical role in determining the martensitic transformation path and temperature in Ni-Ti shape memory alloys. In this study, the equilibrium shape of a coherent Ni 4 Ti 3 precipitate and the concentration and stress fields around it are determined quantitatively using the phase field method. Most recent experimental data on lattice parameters, elastic constants, precipitate-matrix orientation relationship and thermodynamic database are used as model inputs. The effects of the concentration and stress fields on subsequent martensitic transformations are analyzed through interaction energy between a nucleating martensitic particle and the existing microstructure. Results indicate that R-phase formation prior to B19' phase could be attributed to both direct elastic interaction and stress-induced spatial variation in concentration near Ni 4 Ti 3 precipitates. The preferred nucleation sites for the R-phase are close to the broad side of the lenticular-shaped Ni 4 Ti 3 precipitates, where tension normal to the habit plane is highest, and Ni concentration is lowest.

  5. Identification of ultra-fine Ti-rich precipitates in V-Cr-Ti alloys irradiated below 300 deg. C by using positron CDB technique

    International Nuclear Information System (INIS)

    Fukumoto, Ken-ichi; Matsui, Hideki; Ohkubo, Hideaki; Tang, Zheng; Nagai, Yasuyoshi; Hasegawa, Masayuki

    2008-01-01

    Irradiation-induced Ti-rich precipitates in V-Ti and V-4Cr-4Ti alloys are studied by TEM and positron annihilation methods (positron lifetime, and coincidence Doppler broadening (CDB)). The characteristics of small defect clusters formed in V alloys containing Ti at irradiation temperatures below 300 deg. C have not been identified by TEM techniques. Strong interaction between vacancy and Ti solute atoms for irradiated V alloys containing Ti at irradiation temperatures from 220 to 350 deg. C are observed by positron lifetime measurement. The vacancy-multi Ti solute complexes in V-alloys containing Ti are definitely identified by using CDB measurement. It is suggested that ultra-fine Ti-rich precipitates or Ti segregation at periphery of dislocation loops are formed in V alloys containing Ti at irradiation temperatures below 300 deg. C

  6. Lifetime for the Ti X spectrum

    International Nuclear Information System (INIS)

    Singh, Jagjit; Jha, A K S; Mohan, M

    2010-01-01

    We present configuration interaction calculations for the lifetime of 294 fine-structure levels of the Ti X spectrum in the LSJ coupling scheme. The calculations include all the major correlation effects. The relativistic effects are included by adding the mass correction term, Darwin term and spin-orbit interaction term to the non-relativistic Hamiltonian in the Breit-Pauli approximation. The calculated lifetime values are in very close agreement with other available experimental and theoretical results. We have predicted new lifetime results for levels belonging to 3p 2 3d, 3s 2 4p, 3s3p4s, 3s3p4p and various other configurations of Ti X, where no other theoretical and experimental results are available.

  7. Cutting NiTi with Femtosecond Laser

    Directory of Open Access Journals (Sweden)

    L. Quintino

    2013-01-01

    Full Text Available Superelastic shape memory alloys are difficult to machine by thermal processes due to the facility for Ti oxidation and by mechanical processes due to their superelastic behavior. In this study, femtosecond lasers were tested to analyze the potential for machining NiTi since femtosecond lasers allow nonthermal processing of materials by ablation. The effect of processing parameters on machining depth was studied, and material removal rates were computed. Surfaces produced were analyzed under SEM which shows a resolidified thin layer with minimal heat affected zones. However, for high cutting speeds, that is, for short interaction times, this layer was not observed. A depletion of Ni was seen which may be beneficial in biomedical applications since Ni is known to produce human tissue reactions in biophysical environments.

  8. More cloud for TiU

    Directory of Open Access Journals (Sweden)

    Marc van den Berg

    2012-03-01

    Full Text Available After a long period of developing library systems in house, Tilburg University (TiU decided to buy a new integrated library system (ILS and at the same time go for a cloud solution. Functionality, cost and vision of the future of scholarly communication were weighed up, and OCLC came out as the winner: TiU is now implementing OCLC’s ‘Web-scale Management Services’ (WMS and WorldCat Local (WCL. The road leading to that decision is described and some issues to be resolved are mentioned. The implementation project is intended to end in June 2012. Additionally, a short description is given of a possible future Dutch national information infrastructure for scholarly output that consists of just four major building blocks which partly already exist.

  9. Preparation of TiC single crystals

    International Nuclear Information System (INIS)

    Scheerer, B.; Fink, J.; Reichardt, W.

    1975-07-01

    TiC single crystals were prepared by vertical zone melting for measurements of the phonon dispersion by inelastic neutron scattering. The influence of the starting material and of the growing conditions on the growth of the crystal were studied. The crystals were characterized by chemical methods, EMX and neutron diffraction. It was possible to grow single crystals with a volume of up to 0.6 cm 3 and mosaic spread of less then 0.4 0 . (orig.) [de

  10. Highly piezoelectric BaTiO3 nanorod bundle arrays using epitaxially grown TiO2 nanomaterials

    Science.gov (United States)

    Jang, Seon-Min; Yang, Su Chul

    2018-06-01

    Low-dimensional piezoelectric nanostructures such as nanoparticles, nanotubes, nanowires, nanoribbons and nanosheets have been developed for potential applications as energy harvesters, tunable sensors, functional transducers and low-power actuators. In this study, lead-free BaTiO 3 nanorod bundle arrays (NBA) with highly piezoelectric properties were successfully synthesized on fluorine-doped tin oxide (FTO) substrate via a two-step process consisting of TiO2 epitaxial growth and BaTiO3 conversion. Through the TiO2 epitaxial growth on FTO substrate, (001) oriented TiO2 nanostructures formed vertically-aligned NBA with a bundle diameter of 80 nm and an aspect ratio of six. In particular, chemical etching of the TiO2 NBA was conducted to enlarge the surface area for effective Ba2+ ion diffusion during the perovskite conversion process from TiO2 to BaTiO3. The final structure of perovskite BaTiO3 NBA was found to exhibit a feasible piezoelectric response of 3.56 nm with a clear phase change of 180° from the single BaTiO3 bundle, by point piezoelectric forced microscopy (PFM) analysis. Consequently, highly piezoelectric NBA could be a promising nanostructure for various nanoscale electronic devices.

  11. Improved tribological properties of TiC with porous nanostructured TiO{sub 2} intermediate layer

    Energy Technology Data Exchange (ETDEWEB)

    Shanaghi, Ali, E-mail: alishanaghi@gmail.com [Surface Engineering Laboratory, Materials Engineering Department, Faculty of Engineering, Tarbiat Modares University, P.O. Box 14115-143, Tehran (Iran, Islamic Republic of); Department of Physics and Materials Science, City University of Hong Kong, Tat Chee Avenue, Kowloon, Hong Kong (China); Ahangarani, Shahrokh, E-mail: sh.ahangarani@gmail.com [Advanced Materials and Renewable Energies Department, Iranian Research Organization for Science and Technology, P.O. Box 15815-3538, Tehran (Iran, Islamic Republic of); Sabour Rouhaghdam, Ali Reza, E-mail: sabour01@modares.ac.ir [Surface Engineering Laboratory, Materials Engineering Department, Faculty of Engineering, Tarbiat Modares University, P.O. Box 14115-143, Tehran (Iran, Islamic Republic of); Chu, Paul K., E-mail: paul.chu@cityu.edu.hk [Department of Physics and Materials Science, City University of Hong Kong, Tat Chee Avenue, Kowloon, Hong Kong (China)

    2011-12-15

    Highlights: Black-Right-Pointing-Pointer The porous TiO{sub 2} nanoparticle coating is deposited as an intermediate layer on steel. Black-Right-Pointing-Pointer A homogenous and low friction TiC nanostructure coating is deposited by plasma CVD. Black-Right-Pointing-Pointer Intermediate layer can be determined the nucleation and growth of the TiC coating. Black-Right-Pointing-Pointer The porous interlayer improves the friction and wear of the TiC nanostructure coating. - Abstract: The mismatch in the thermal expansion coefficients between TiC coatings and steel substrates and residual stress in the TiC degrade the tribological properties. In this work, a porous nanostructured TiO{sub 2} coating is deposited as an intermediate layer on hot-work steel (H{sub 11}) before final deposition of the TiC film. This intermediate layer is expected to reduce the interfacial energy, decreases the thermal mismatch between TiC and steel, and improves the tribological properties. Grazing incidence X-ray diffraction (GIXRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), atomic force microscopy (AFM), and pin-on-disk are used to study the structure as well as tribological properties such as friction, wear, and hardness. Our results reveal that the porous TiO{sub 2} interlayer improves the friction, wear, hardness, and elastic modulus of the system.

  12. Highly piezoelectric BaTiO3 nanorod bundle arrays using epitaxially grown TiO2 nanomaterials.

    Science.gov (United States)

    Jang, Seon-Min; Yang, Su Chul

    2018-06-08

    Low-dimensional piezoelectric nanostructures such as nanoparticles, nanotubes, nanowires, nanoribbons and nanosheets have been developed for potential applications as energy harvesters, tunable sensors, functional transducers and low-power actuators. In this study, lead-free BaTiO 3 nanorod bundle arrays (NBA) with highly piezoelectric properties were successfully synthesized on fluorine-doped tin oxide (FTO) substrate via a two-step process consisting of TiO 2 epitaxial growth and BaTiO 3 conversion. Through the TiO 2 epitaxial growth on FTO substrate, (001) oriented TiO 2 nanostructures formed vertically-aligned NBA with a bundle diameter of 80 nm and an aspect ratio of six. In particular, chemical etching of the TiO 2 NBA was conducted to enlarge the surface area for effective Ba 2+ ion diffusion during the perovskite conversion process from TiO 2 to BaTiO 3 . The final structure of perovskite BaTiO 3 NBA was found to exhibit a feasible piezoelectric response of 3.56 nm with a clear phase change of 180° from the single BaTiO 3 bundle, by point piezoelectric forced microscopy (PFM) analysis. Consequently, highly piezoelectric NBA could be a promising nanostructure for various nanoscale electronic devices.

  13. Minimum ignition energy of nano and micro Ti powder in the presence of inert nano TiO₂ powder.

    Science.gov (United States)

    Chunmiao, Yuan; Amyotte, Paul R; Hossain, Md Nur; Li, Chang

    2014-06-15

    The inerting effect of nano-sized TiO2 powder on ignition sensitivity of nano and micro Ti powders was investigated with a Mike 3 apparatus. "A little is not good enough" is also suitable for micro Ti powders mixed with nano-sized solid inertants. MIE of the mixtures did not significantly increase until the TiO2 percentage exceeded 50%. Nano-sized TiO2 powders were ineffective as an inertant when mixed with nano Ti powders, especially at higher dust loadings. Even with 90% nano TiO2 powder, mixtures still showed high ignition sensitivity because the statistic energy was as low as 2.1 mJ. Layer fires induced by ignited but unburned metal particles may occur for micro Ti powders mixed with nano TiO2 powders following a low level dust explosion. Such layer fires could lead to a violent dust explosion after a second dispersion. Thus, additional attention is needed to prevent metallic layer fires even where electric spark potential is low. In the case of nano Ti powder, no layer fires were observed because of less flammable material involved in the mixtures investigated, and faster flame propagation in nanoparticle clouds. Copyright © 2014 Elsevier B.V. All rights reserved.

  14. Effect of Zirconium Addition on Microstructure and Mechanical Property of TiC/Ti6A14V Composites

    Science.gov (United States)

    Ma, Xuliang; Wang, Xiang; Li, Li; Gai, Pengtao; Zhu, Chengwu

    TiC/Ti6A14V composites with different Zr additions were prepared successfully in a consumable vacuum arc furnace equipped with a water-cooled copper crucible and the effect of the Zr content on the microstructure and mechanical property of 15 vol.%TiC/Ti6A14V composites was investigated by XRD, SEM and hardness testing. The results show that when the level of Zr addition is less than 4 wt.%, the morphology of the primary TiC in the composites is dendrite, and the petal-shape, piece-shape or palpus-shape eutectic TiC separates out around the primary TiC. The average size of the primary TiC decreases and the amount of eutectic TiC increases gradually with increasing Zr content. The effects of Zr on morphology of the primary TiC weaken with further addition of Zr. And the hardness (HRC) of composites was obviously increased in the whole range of Zr addition. The refinement mechanism of Zr was attributed to the combined effects of increase in nucleation rate at the constitutionally supercooled zone ahead of the solidification front and reduction in growth rate.

  15. Modeling creep deformation of a two-phase TiAI/Ti3Al alloy with a lamellar microstructure

    Science.gov (United States)

    Bartholomeusz, Michael F.; Wert, John A.

    1994-10-01

    A two-phase TiAl/Ti3Al alloy with a lamellar microstructure has been previously shown to exhibit a lower minimum creep rate than the minimum creep rates of the constituent TiAl and Ti3Al single-phase alloys. Fiducial-line experiments described in the present article demonstrate that the creep rates of the constituent phases within the two-phase TiAl/Ti3Al lamellar alloy tested in compression are more than an order of magnitude lower than the creep rates of single-phase TiAl and Ti3Al alloys tested in compression at the same stress and temperature. Additionally, the fiducial-line experiments show that no interfacial sliding of the phases in the TiAl/Ti3Al lamellar alloy occurs during creep. The lower creep rate of the lamellar alloy is attributed to enhanced hardening of the constituent phases within the lamellar microstructure. A composite-strength model has been formulated to predict the creep rate of the lamellar alloy, taking into account the lower creep rates of the constituent phases within the lamellar micro-structure. Application of the model yields a very good correlation between predicted and experimentally observed minimum creep rates over moderate stress and temperature ranges.

  16. Characteristics and in vitro biological assessment of (Ti, O, N)/Ti composite coating formed on NiTi shape memory alloy

    International Nuclear Information System (INIS)

    Sun Tao; Wang Langping; Wang Min; Tong, Ho-Wang; Lu, William W.

    2011-01-01

    In this investigation, plasma immersion ion implantation and deposition (PIIID) was used to fabricate a (Ti, O, N)/Ti coating on NiTi shape memory alloy (SMA) to improve its long-term biocompatibility and wear resistance. The surface morphology, composition and roughness of uncoated and coated NiTi SMA samples were examined. Energy dispersive X-ray elemental mapping of cross-sections of (Ti, O, N)/Ti coated NiTi SMA revealed that Ni was depleted from the surface of coated samples. No Ni was detected by X-ray photoelectron spectroscopy on the surface of coated samples. Furthermore, three-point bending tests showed that the composite coating could undergo large deformation without cracking or delamination. After 1 day cell culture, SaOS-2 cells on coated samples spread better than those on uncoated NiTi SMA samples. The proliferation of SaOS-2 cells on coated samples was significantly higher at day 3 and day 7 of cell culture.

  17. Diffusion behavior in the films of Nb-Ti systems

    International Nuclear Information System (INIS)

    Yoshitake, Michiko; Yoshihara, Kazuhiro

    1990-01-01

    The diffusion behavior of substrate element into a deposited film was investigated. The observed systems were a Nb film/Ti substrate and a Ti film/Nb substrate. When the Nb film/Ti substrate was heated in a vacuum, Ti diffused very rapidly in the Nb film. The pre-exponential factor of the diffusion constant of Ti in the Nb film was 5.6x10 -2 m 2 s -1 , and the activation energy was 220 kJmol -1 . The observed activation energy is about 60% of that of Ti in the bulk Nb. On the other hand, when the Ti film/Nb substrate was heated in a vacuum, Nb did not diffuse so rapidly. Titanium diffused through the Nb film rapidly and was concentrated on the surface of the Nb film. The chemical state of the concentrated Ti was metallic, and neither titanium oxides nor titanium carbide was observed. Therefore, the driving force of the rapid diffusion of Ti in the Nb film is considered as the reduction of the surface energy of Nb film. The difference in the diffusion behavior between Ti through the Nb film and Nb through the Ti film is explained supposing that the segregation of Ti reduces the surface energy of the Nb film but the segregation of Nb does not reduce the surface energy of the Ti film. After heating of the Nb film/Ti substrate for a long time, a new phase was formed at the interface between the Nb film and the Ti substrate. The chemical composition of the new phase is about 50% of Ti and 50% of Nb. This phase has not been reported in the phase diagram of the bulk Ti-Nb system. The surface area of the Nb film is considered to be quite large, so the contribution of surface energy to the thermodynamic state of the Nb film cannot be neglected. Therefore, the chemical potential of the film is different from that of the bulk. Then, the new phase, which does not exist in the phase diagram of the bulk system, is formed by an interaction of the films. (author)

  18. Contribution to the study of U-Ti and U-Pu-Ti carbides; Contribution a l'etude des carbures U-C-Ti et (U, Pu) - C-Ti

    Energy Technology Data Exchange (ETDEWEB)

    Milet, C A [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1968-07-01

    After having discussed the reasons to use (U,Pu) carbides as fast reactor fuel, we examine the influence of the addition of titanium to these carbides. A preliminary study has been done on the system of U-C-Ti and some properties have been measured such as: density, thermal expansion, electrical resistivity, atmospheric corrosion and compatibility with stainless steel. The systems U-Pu-C-Ti (Pu/U + Pu equal to 15 per cent) and U-C-Ti have been found to be very similar. There exists a two phases region (U,Pu)C + TiC, an eutectic between (U,Pu)C and TiC for approximately 15 at %. The solubilities of U + Pu in TiC and of Ti in (U,Pu)C is less than 1 % at. The addition of titanium does not markedly change thermal expansion coefficients of (U,Pu)C. However the resistance to atmospheric corrosion and compatibility with stainless steel is improved. Thermal conductivity, calculated from electrical resistivity, has increased. On the other side, the density of fissile material is lowered. The combination of (U,Pu)C + TiC seems to be the most promising alloy for application as nuclear fuel. (author) [French] Apres avoir rappele les problemes poses par un combustible pour les reacteurs a neutrons rapides et l'interet des carbures U-Pu-C comme combustible, on examine l'influence de l'addition de titane dans ces carbures. Une etude preliminaire sur le systeme U-C-Ti a ete effectuee et quelques proprietes sont indiquees: densite, coefficients de dilatation, resistivite electrique, tenue a la corrosion atmospherique, compatibilite avec l'acier inoxydable. Le systeme U-Pu-C-Ti (Pu/U + Pu egal a 15 pour cent) presente de grandes analogies avec le systeme U-C-Ti. Il existe un domaine biphase (U,Pu)C + TiC, un eutectique entre (U,Pu)C et TiC pour environ 15 at % Ti; les solubilites de U + Pu clans TiC et de Ti dans (U,Pu)C sont inferieures a 1 at %. Par rapport a la phase (U,Pu)C, l'addition de titane est sans effets importants sur les coefficients de dilatation. Par contre la tenue a

  19. NiTiCu/AlN/NiTiCu shape memory thin film heterostructures for vibration damping in MEMS

    Energy Technology Data Exchange (ETDEWEB)

    Kaur, Navjot; Kaur, Davinder, E-mail: dkaurfph@iitr.ernet.in

    2014-03-25

    Highlights: • Fabrication of NiTiCu/AlN/NiTiCu heterostructure using dc/rf magnetron sputtering. • Exhibits highest hardness (38 GPa) and elastic modulus (187 GPa). • Enhanced dissipation of mechanical energy (E{sub d} = 5.7 N J). • High damping capacity (0.052) and figure of merit (∼0.62). • Can be applied for vibration damping in MEMS. -- Abstract: Shape memory alloy (NiTiCu) thin films coupled with piezoelectric AlN layer produce an intelligent material for vibration damping. In the present study pure NiTiCu, NiTiCu/AlN and NiTiCu/AlN/NiTiCu heterostructures have been deposited on Si substrate using magnetron sputtering technique. By the use of the interfaces and shape memory effect provided by NiTiCu layers, the damping capacity can be increased along with increase in stiffness and mechanical hardness. The heterostructures were characterized in terms of structural, electrical, morphological and mechanical properties by X-ray diffraction (XRD), four probe resistivity method, atomic force microscopy, field emission scanning electron microscopy, and nanoindentation. The NiTiCu/AlN/NiTiCu heterostructure exhibit enhanced mechanical and damping properties as compared to NiTiCu/AlN and pure NiTiCu. This enhancement in hardness and damping of the heterostructure could be attributed to the shape memory effect of NiTiCu, intrinsic piezoelectricity of AlN and increased number of interfaces in heterostructure that help in dissipation of mechanical vibrations. The findings of this work provide additional impetus for the application of these heterostructures in emerging fields of nanotechnology and microelectro mechanical (MEMS) devices.

  20. NiTiCu/AlN/NiTiCu shape memory thin film heterostructures for vibration damping in MEMS

    International Nuclear Information System (INIS)

    Kaur, Navjot; Kaur, Davinder

    2014-01-01

    Highlights: • Fabrication of NiTiCu/AlN/NiTiCu heterostructure using dc/rf magnetron sputtering. • Exhibits highest hardness (38 GPa) and elastic modulus (187 GPa). • Enhanced dissipation of mechanical energy (E d = 5.7 N J). • High damping capacity (0.052) and figure of merit (∼0.62). • Can be applied for vibration damping in MEMS. -- Abstract: Shape memory alloy (NiTiCu) thin films coupled with piezoelectric AlN layer produce an intelligent material for vibration damping. In the present study pure NiTiCu, NiTiCu/AlN and NiTiCu/AlN/NiTiCu heterostructures have been deposited on Si substrate using magnetron sputtering technique. By the use of the interfaces and shape memory effect provided by NiTiCu layers, the damping capacity can be increased along with increase in stiffness and mechanical hardness. The heterostructures were characterized in terms of structural, electrical, morphological and mechanical properties by X-ray diffraction (XRD), four probe resistivity method, atomic force microscopy, field emission scanning electron microscopy, and nanoindentation. The NiTiCu/AlN/NiTiCu heterostructure exhibit enhanced mechanical and damping properties as compared to NiTiCu/AlN and pure NiTiCu. This enhancement in hardness and damping of the heterostructure could be attributed to the shape memory effect of NiTiCu, intrinsic piezoelectricity of AlN and increased number of interfaces in heterostructure that help in dissipation of mechanical vibrations. The findings of this work provide additional impetus for the application of these heterostructures in emerging fields of nanotechnology and microelectro mechanical (MEMS) devices