WorldWideScience

Sample records for thresholds developing monitoring

  1. Regional Seismic Threshold Monitoring

    National Research Council Canada - National Science Library

    Kvaerna, Tormod

    2006-01-01

    ... model to be used for predicting the travel times of regional phases. We have applied these attenuation relations to develop and assess a regional threshold monitoring scheme for selected subregions of the European Arctic...

  2. Image thresholding in the high resolution target movement monitor

    Science.gov (United States)

    Moss, Randy H.; Watkins, Steve E.; Jones, Tristan H.; Apel, Derek B.; Bairineni, Deepti

    2009-03-01

    Image thresholding in the High Resolution Target Movement Monitor (HRTMM) is examined. The HRTMM was developed at the Missouri University of Science and Technology to detect and measure wall movements in underground mines to help reduce fatality and injury rates. The system detects the movement of a target with sub-millimeter accuracy based on the images of one or more laser dots projected on the target and viewed by a high-resolution camera. The relative position of the centroid of the laser dot (determined by software using thresholding concepts) in the images is the key factor in detecting the target movement. Prior versions of the HRTMM set the image threshold based on a manual, visual examination of the images. This work systematically examines the effect of varying threshold on the calculated centroid position and describes an algorithm for determining a threshold setting. First, the thresholding effects on the centroid position are determined for a stationary target. Plots of the centroid positions as a function of varying thresholds are obtained to identify clusters of thresholds for which the centroid position does not change for stationary targets. Second, the target is moved away from the camera in sub-millimeter increments and several images are obtained at each position and analyzed as a function of centroid position, target movement and varying threshold values. With this approach, the HRTMM can accommodate images in batch mode without the need for manual intervention. The capability for the HRTMM to provide automated, continuous monitoring of wall movement is enhanced.

  3. Developing thresholds of potential concern for invasive alien species: Hypotheses and concepts

    Directory of Open Access Journals (Sweden)

    Llewellyn C. Foxcroft

    2009-03-01

    Conservation implication: In accepting that species and systems are variable, and that flux is inevitable and desirable, these TPCs developed for invasive alien species specifi cally, provide end points against which monitoring can be assessed. Once a threshold is reached, the cause of the threshold being exceeded is examined and management interventions recommended.

  4. Canary in the Coal Mine: Monitoring Indicators and Thresholds of Ecological Integrity

    Science.gov (United States)

    Applegate, L. M.

    2010-12-01

    Ecological integrity is the ability of an ecosystem to maintain resilience when disturbed; retain native or natural components and processes; and remain sustainable without external inputs. Ecosystems may be subject to a variety of anthropogenic disturbances from intentional natural resource harvesting such as cattle grazing or timber harvest to unintentional large scale processes including climate change. Monitoring ecological integrity can aid in the prevention of irreversible degradation of a system by identifying indicators to serve as early warning signs of degradation. Our central hypothesis is that changes in ecological integrity and movement towards thresholds may be anticipated through monitoring. Our research objective is to develop efficient and effective methods and indicators for natural resource management. We have collected data for four years (2006-2010) on grazed Wildlife Management Areas in southeastern Washington State using a replicated study design in two ecosystem types stratified by six ecological sites distributed within nine pastures. Methods and metrics were developed from quantitative data (cover, frequency, and species richness), qualitative data (photo monitoring and rangeland health surveys), and desired ecological conditions based on state and transition models and classification systems previously published for the study area. The data are a first step to identify efficient and effective methods and metrics to enable natural resource managers to monitor ecological integrity and identify and avoid crossing irreversible thresholds. Study area, southeast Washington State. Photo by Laura Applegate

  5. Required accuracy and dose thresholds in individual monitoring

    DEFF Research Database (Denmark)

    Christensen, P.; Griffith, R.V.

    1994-01-01

    The paper follows the approach given in recent revisions of CEC and IAEA recommendations on requirements in individual monitoring for external radiations. The ICRP requirements on overall accuracy for individual monitoring, as given in ICRP Publication 35 (1982), form the basis for the specificat....... The paper discusses different definitions of the lower detectability of dosimetry systems for individual monitoring.......The paper follows the approach given in recent revisions of CEC and IAEA recommendations on requirements in individual monitoring for external radiations. The ICRP requirements on overall accuracy for individual monitoring, as given in ICRP Publication 35 (1982), form the basis...... the overall standard deviation of the dosimetry system by combining random and systematic uncertainties in quadrature, and procedures are also given for determining each individual uncertainty connected to the dose measurement. In particular, attention is paid to the evaluation of the combined uncertainty due...

  6. Automatic Threshold Setting and Its Uncertainty Quantification in Wind Turbine Condition Monitoring System

    DEFF Research Database (Denmark)

    Marhadi, Kun Saptohartyadi; Skrimpas, Georgios Alexandros

    2015-01-01

    Setting optimal alarm thresholds in vibration based condition monitoring system is inherently difficult. There are no established thresholds for many vibration based measurements. Most of the time, the thresholds are set based on statistics of the collected data available. Often times the underly......Setting optimal alarm thresholds in vibration based condition monitoring system is inherently difficult. There are no established thresholds for many vibration based measurements. Most of the time, the thresholds are set based on statistics of the collected data available. Often times...... the underlying probability distribution that describes the data is not known. Choosing an incorrect distribution to describe the data and then setting up thresholds based on the chosen distribution could result in sub-optimal thresholds. Moreover, in wind turbine applications the collected data available may...... not represent the whole operating conditions of a turbine, which results in uncertainty in the parameters of the fitted probability distribution and the thresholds calculated. In this study, Johnson, Normal, and Weibull distributions are investigated; which distribution can best fit vibration data collected...

  7. Required accuracy and dose thresholds in individual monitoring

    DEFF Research Database (Denmark)

    Christensen, P.; Griffith, R.V.

    1994-01-01

    this uncertainty factor, a value of 21% can be evaluated for the allowable maximum overall standard deviation for dose measurements at dose levels near the annual dose limits increasing to 45% for dose levels at the lower end of the dose range required to be monitored. A method is described for evaluating...... the overall standard deviation of the dosimetry system by combining random and systematic uncertainties in quadrature, and procedures are also given for determining each individual uncertainty connected to the dose measurement. In particular, attention is paid to the evaluation of the combined uncertainty due...... to energy and angular dependencies of the dosemeter. In type testing of personal dosimetry systems, the estimated overall standard deviation of the dosimetry system is the main parameter to be tested. An important characteristic of a personal dosimetry system is its capability of measuring low doses...

  8. Cognitive Abilities, Monitoring Confidence, and Control Thresholds Explain Individual Differences in Heuristics and Biases

    Science.gov (United States)

    Jackson, Simon A.; Kleitman, Sabina; Howie, Pauline; Stankov, Lazar

    2016-01-01

    In this paper, we investigate whether individual differences in performance on heuristic and biases tasks can be explained by cognitive abilities, monitoring confidence, and control thresholds. Current theories explain individual differences in these tasks by the ability to detect errors and override automatic but biased judgments, and deliberative cognitive abilities that help to construct the correct response. Here we retain cognitive abilities but disentangle error detection, proposing that lower monitoring confidence and higher control thresholds promote error checking. Participants (N = 250) completed tasks assessing their fluid reasoning abilities, stable monitoring confidence levels, and the control threshold they impose on their decisions. They also completed seven typical heuristic and biases tasks such as the cognitive reflection test and Resistance to Framing. Using structural equation modeling, we found that individuals with higher reasoning abilities, lower monitoring confidence, and higher control threshold performed significantly and, at times, substantially better on the heuristic and biases tasks. Individuals with higher control thresholds also showed lower preferences for risky alternatives in a gambling task. Furthermore, residual correlations among the heuristic and biases tasks were reduced to null, indicating that cognitive abilities, monitoring confidence, and control thresholds accounted for their shared variance. Implications include the proposal that the capacity to detect errors does not differ between individuals. Rather, individuals might adopt varied strategies that promote error checking to different degrees, regardless of whether they have made a mistake or not. The results support growing evidence that decision-making involves cognitive abilities that construct actions and monitoring and control processes that manage their initiation. PMID:27790170

  9. Cognitive Abilities, Monitoring Confidence, and Control Thresholds Explain Individual Differences in Heuristics and Biases.

    Science.gov (United States)

    Jackson, Simon A; Kleitman, Sabina; Howie, Pauline; Stankov, Lazar

    2016-01-01

    In this paper, we investigate whether individual differences in performance on heuristic and biases tasks can be explained by cognitive abilities, monitoring confidence, and control thresholds. Current theories explain individual differences in these tasks by the ability to detect errors and override automatic but biased judgments, and deliberative cognitive abilities that help to construct the correct response. Here we retain cognitive abilities but disentangle error detection, proposing that lower monitoring confidence and higher control thresholds promote error checking. Participants ( N = 250) completed tasks assessing their fluid reasoning abilities, stable monitoring confidence levels, and the control threshold they impose on their decisions. They also completed seven typical heuristic and biases tasks such as the cognitive reflection test and Resistance to Framing. Using structural equation modeling, we found that individuals with higher reasoning abilities, lower monitoring confidence, and higher control threshold performed significantly and, at times, substantially better on the heuristic and biases tasks. Individuals with higher control thresholds also showed lower preferences for risky alternatives in a gambling task. Furthermore, residual correlations among the heuristic and biases tasks were reduced to null, indicating that cognitive abilities, monitoring confidence, and control thresholds accounted for their shared variance. Implications include the proposal that the capacity to detect errors does not differ between individuals. Rather, individuals might adopt varied strategies that promote error checking to different degrees, regardless of whether they have made a mistake or not. The results support growing evidence that decision-making involves cognitive abilities that construct actions and monitoring and control processes that manage their initiation.

  10. Software thresholds alter the bias of actigraphy for monitoring sleep in team-sport athletes.

    Science.gov (United States)

    Fuller, Kate L; Juliff, Laura; Gore, Christopher J; Peiffer, Jeremiah J; Halson, Shona L

    2017-08-01

    Actical ® actigraphy is commonly used to monitor athlete sleep. The proprietary software, called Actiware ® , processes data with three different sleep-wake thresholds (Low, Medium or High), but there is no standardisation regarding their use. The purpose of this study was to examine validity and bias of the sleep-wake thresholds for processing Actical ® sleep data in team sport athletes. Validation study comparing actigraph against accepted gold standard polysomnography (PSG). Sixty seven nights of sleep were recorded simultaneously with polysomnography and Actical ® devices. Individual night data was compared across five sleep measures for each sleep-wake threshold using Actiware ® software. Accuracy of each sleep-wake threshold compared with PSG was evaluated from mean bias with 95% confidence limits, Pearson moment-product correlation and associated standard error of estimate. The Medium threshold generated the smallest mean bias compared with polysomnography for total sleep time (8.5min), sleep efficiency (1.8%) and wake after sleep onset (-4.1min); whereas the Low threshold had the smallest bias (7.5min) for wake bouts. Bias in sleep onset latency was the same across thresholds (-9.5min). The standard error of the estimate was similar across all thresholds; total sleep time ∼25min, sleep efficiency ∼4.5%, wake after sleep onset ∼21min, and wake bouts ∼8 counts. Sleep parameters measured by the Actical ® device are greatly influenced by the sleep-wake threshold applied. In the present study the Medium threshold produced the smallest bias for most parameters compared with PSG. Given the magnitude of measurement variability, confidence limits should be employed when interpreting changes in sleep parameters. Copyright © 2017 Sports Medicine Australia. All rights reserved.

  11. Financial Development and Inclusive Growth in Nigeria: A Threshold Analysis

    Directory of Open Access Journals (Sweden)

    Taofeek Olusola Ayinde

    2016-10-01

    Full Text Available This study investigates the relationship between financial development and inclusive growth in Nigeria for the period 1980 – 2013. The technique of analysis is the quantile regression; which is to obtain a threshold for which the former impacts on the latter. The result shows a threshold level of 90th percentile. Interestingly, the study also found that the impact of financial development on inclusive growth depends on the measure of the former up to the threshold level and not beyond. Through a granger causality test, the direction of causality is through the inclusive growth rather than through financial development; through the financial deepening measure. While the study found that either a low level or high level of openness on trade and capital investment are desirable for inclusive growth in Nigeria, the results also reveal that government involvement in the workings of the Nigeria economy and financial openness are sensitive to the pattern of financial development. With financial deepening, both are negatively related to inclusive growth but positively related to inclusive growth when financial widening is considered. This suggests that government intervention in the activities of the private sector is detrimental when the latter are to drive financial development process. However, the involvement of government in ensuring the appropriate level of financial widening, through the central bank operations, produces a positive impact on growth.

  12. Objective determination of pH thresholds in the analysis of 24 h ambulatory oesophageal pH monitoring

    NARCIS (Netherlands)

    Weusten, B. L.; Roelofs, J. M.; Akkermans, L. M.; vanBerge-Henegouwen, G. P.; Smout, A. J.

    1996-01-01

    In 24 h oesophageal pH monitoring, pH 4 is widely but arbitrarily used as the threshold between reflux and non-reflux pH values. The aim of the study was to define pH thresholds objectively, based on Gaussian curve fitting of pH frequency distributions. Single-channel 24 h oesophageal pH monitoring

  13. Development of Thresholds and Exceedance Probabilities for Influent Water Quality to Meet Drinking Water Regulations

    Science.gov (United States)

    Reeves, K. L.; Samson, C.; Summers, R. S.; Balaji, R.

    2017-12-01

    Drinking water treatment utilities (DWTU) are tasked with the challenge of meeting disinfection and disinfection byproduct (DBP) regulations to provide safe, reliable drinking water under changing climate and land surface characteristics. DBPs form in drinking water when disinfectants, commonly chlorine, react with organic matter as measured by total organic carbon (TOC), and physical removal of pathogen microorganisms are achieved by filtration and monitored by turbidity removal. Turbidity and TOC in influent waters to DWTUs are expected to increase due to variable climate and more frequent fires and droughts. Traditional methods for forecasting turbidity and TOC require catchment specific data (i.e. streamflow) and have difficulties predicting them under non-stationary climate. A modelling framework was developed to assist DWTUs with assessing their risk for future compliance with disinfection and DBP regulations under changing climate. A local polynomial method was developed to predict surface water TOC using climate data collected from NOAA, Normalized Difference Vegetation Index (NDVI) data from the IRI Data Library, and historical TOC data from three DWTUs in diverse geographic locations. Characteristics from the DWTUs were used in the EPA Water Treatment Plant model to determine thresholds for influent TOC that resulted in DBP concentrations within compliance. Lastly, extreme value theory was used to predict probabilities of threshold exceedances under the current climate. Results from the utilities were used to produce a generalized TOC threshold approach that only requires water temperature and bromide concentration. The threshold exceedance model will be used to estimate probabilities of exceedances under projected climate scenarios. Initial results show that TOC can be forecasted using widely available data via statistical methods, where temperature, precipitation, Palmer Drought Severity Index, and NDVI with various lags were shown to be important

  14. Development of a landlside EWS based on rainfall thresholds for Tuscany Region, Italy

    Science.gov (United States)

    Rosi, Ascanio; Segoni, Samuele; Battistini, Alessandro; Rossi, Guglielmo; Catani, Filippo; Casagli, Nicola

    2017-04-01

    We present the set-up of a landslide EWS based on rainfall thresholds for the Tuscany region (central Italy), that shows a heterogeneous distribution of reliefs and precipitation. The work started with the definition of a single set of thresholds for the whole region, but it resulted unsuitable for EWS purposes, because of the heterogeneity of the Tuscan territory and non-repeatability of the analyses, that were affected by a high degree of subjectivity. To overcome this problem, the work started from the implementation of a software capable of objectively defining the rainfall thresholds, since some of the main issues of these thresholds are the subjectivity of the analysis and therefore their non-repeatability. This software, named MaCumBA, is largely automated and can analyze, in a short time, a high number of rainfall events to define several parameters of the threshold, such as the intensity (I) and the duration (D) of the rainfall event, the no-rain time gap (NRG: how many hours without rain are needed to consider two events as separated) and the equation describing the threshold. The possibility of quickly perform several analyses lead to the decision to divide the territory in 25 homogeneous areas (named alert zones, AZ), so as a single threshold for each AZ could be defined. For the definition of the thresholds two independent datasets (of joint rainfall-landslide occurrences) have been used: a calibration dataset (data from 2000 to 2007) and a validation dataset (2008-2009). Once the thresholds were defined, a WebGIS-based EWS has been implemented. In this system it is possible to focus both on monitoring of real-time data and on forecasting at different lead times up to 48 h; forecasting data are collected from LAMI (Limited Area Model Italy) rainfall forecasts. The EWS works on the basis of the threshold parameters defined by MaCumBA (I, D, NRG). An important feature of the warning system is that the visualization of the thresholds in the Web

  15. Threshold self-powered gamma detector for use as a nuclear reactor power monitor

    International Nuclear Information System (INIS)

    LeVert, F.E.

    1977-01-01

    A study of a threshold self-powered gamma detector for use as a nuclear reactor power monitor was conducted. Measurements were performed to ascertain whether certain detector material arrangements could be used to obtain significant discrimination against low energy gammas. Results indicating agreement between detector response and reactor power output are presented. Evidence of rejection of low energy gammas by the detector is presented. The simplicity of construction and ruggedness of the detector are also discussed

  16. Cognitive Abilities, Monitoring Confidence, and Control Thresholds Explain Individual Differences in Heuristics and Biases

    OpenAIRE

    Jackson, Simon A.; Kleitman, Sabina; Howie, Pauline; Stankov, Lazar

    2016-01-01

    In this paper, we investigate whether individual differences in performance on heuristic and biases tasks can be explained by cognitive abilities, monitoring confidence, and control thresholds. Current theories explain individual differences in these tasks by the ability to detect errors and override automatic but biased judgments, and deliberative cognitive abilities that help to construct the correct response. Here we retain cognitive abilities but disentangle error detection, proposing tha...

  17. Stakeholder Participation in Freshwater Monitoring and Evaluation Programs: Applying Thresholds of Potential Concern within Environmental Flows

    Science.gov (United States)

    Conallin, John; McLoughlin, Craig A.; Campbell, Josh; Knight, Roger; Bright, Troy; Fisher, Ian

    2018-03-01

    The complex nature of freshwater systems provides challenges for incorporating evidence-based techniques into management. This paper investigates the potential of participatory evidence-based techniques to involve local stakeholders and make decisions based on different "knowledge" sources within adaptive management programs. It focuses on the application of thresholds of potential concern (TPC) within strategic adaptive management (SAM) for facilitating inclusive decision-making. The study is based on the case of the Edward-Wakool (E-W) "Fish and Flows" SAM project in the Murray-Darling River Basin, Australia. We demonstrate the application of TPCs for improving collaborative decision-making within the E-W, associated with environmental watering requirements, and other natural resource management programs such as fish stocking. The development of TPCs in the E-W fish and flows SAM project helped improve stakeholder involvement and understanding of the system, and also the effectiveness of the implemented management interventions. TPCs ultimately helped inform environmental flow management activities. The TPC process complemented monitoring that was already occurring in the system and provided a mechanism for linking formal and informal knowledge to form explicit and measurable endpoints from objectives. The TPC process faced challenges due to the perceived reduction in scientific rigor within initial TPC development and use. However, TPCs must remain tangible to managers and other stakeholders, in order to aid in the implementation of adaptive management. Once accepted by stakeholders, over time TPCs should be reviewed and refined in order to increase their scientific rigor, as new information is generated.

  18. Development of threshold action criteria for light water reactors

    International Nuclear Information System (INIS)

    Okrent, D.; Baldewicz, W.L.

    1982-06-01

    A survey of recently threshold criteria for regulatory action on LWRs is presented together with some commentary. This is followed by a new proposal for threshold action criteria which includes some different risk attributes than are found in previous criteria. Some preliminary risk values are suggested for the criteria and then evaluated in terms of a few hypothetical accident scenarios. Finally, several licensing issues are examined in terms of various threshold action criteria

  19. Developments in seismic monitoring for risk reduction

    Science.gov (United States)

    Celebi, M.

    2007-01-01

    This paper presents recent state-of-the-art developments to obtain displacements and drift ratios for seismic monitoring and damage assessment of buildings. In most cases, decisions on safety of buildings following seismic events are based on visual inspections of the structures. Real-time instrumental measurements using GPS or double integration of accelerations, however, offer a viable alternative. Relevant parameters, such as the type of connections and structural characteristics (including storey geometry), can be estimated to compute drifts corresponding to several pre-selected threshold stages of damage. Drift ratios determined from real-time monitoring can then be compared to these thresholds in order to estimate damage conditions drift ratios. This approach is demonstrated in three steel frame buildings in San Francisco, California. Recently recorded data of strong shaking from these buildings indicate that the monitoring system can be a useful tool in rapid assessment of buildings and other structures following an earthquake. Such systems can also be used for risk monitoring, as a method to assess performance-based design and analysis procedures, for long-term assessment of structural characteristics of a building, and as a possible long-term damage detection tool.

  20. Fiscal developments and financial stress: a threshold VAR analysis

    Czech Academy of Sciences Publication Activity Database

    Afonso, A.; Baxa, Jaromír; Slavík, M.

    2011-01-01

    Roč. 2011, č. 1319 (2011), s. 1-60 ISSN 1725-2806 Institutional research plan: CEZ:AV0Z10750506 Keywords : fiscal policy * financial markets * threshold VAR Subject RIV: AH - Economics http://library.utia.cas.cz/separaty/2011/E/baxa-0364091.pdf

  1. Fiscal developments and financial stress: a threshold VAR analysis

    Czech Academy of Sciences Publication Activity Database

    Afonso, A.; Baxa, Jaromír; Slavík, M.

    2018-01-01

    Roč. 54, č. 2 (2018), s. 395-423 ISSN 0377-7332 R&D Projects: GA ČR(CZ) GBP402/12/G097 Institutional support: RVO:67985556 Keywords : Fiscal policy * Financial markets * Threshold VAR Subject RIV: AH - Economics OBOR OECD: Applied Economics, Econometrics Impact factor: 0.645, year: 2016 http://library.utia.cas.cz/separaty/2018/E/baxa-0488303.pdf

  2. Development of structural condition thresholds for TSD measurements

    OpenAIRE

    Shrestha, Shivesh

    2017-01-01

    This thesis presents (a) results of a field evaluation of the Traffic Speed Deflectometer (TSD) in the United States (b) deflection thresholds to classify the pavement structural condition obtained from the TSD for a small subset of the Pennsylvania secondary road network. The results of the field evaluation included: (1) repeatability of the TSD, (2) ability of the TSD to identify pavement sections with varying structural conditions, and (3) consistency between the structural number (SNeff) ...

  3. Development of radiation alarm monitor

    International Nuclear Information System (INIS)

    Myung Jae Song; Myung Chan Lee; Jung Kwan Son

    1997-01-01

    The Radiation Alarm Monitor is developed domestically in order to protect radiation workers from over exposure. The Radiation Alarm Monitor with microprocessor installed can record the information of radiation field before and after accidents. It can also provide the data to analyze the accident and to set a counterplan. It features a wide detection range of radiation (I OmR/h - I OOR/h), radiation work and data storage, portability, high precision (5%) due to calibration, and adaptation of a powerful alarm system. In order to protect workers from over exposure, light and sound alarm had been designed to initiate when accident occurs such as an unexpected change of radiation field such as radiation rate and accumulated dosed between 90 min. before the alarm and 30 min. after the alarm. In addition, the Radiation Alarm Monitor interfaces with computer so that the accident can be analyzed. After the testing conditions in other countries for the Radiation Alarm Monitor were compared, the most stringent test, ANSI N42. 17-A, was selected. The performance testing was car-ried out under various conditions of temperature, humidity, vibration and electromagnetic wave hindrance by Korea Research Institute of Standards and Science (KRISS). As a result, the Radiation Alan-n Monitor passed all test. Also, for the Radiation Alarm Monitor, environmental adaptability tests under the environmental conditions of NPP sites had been performed. The Radiation Alan-n Monitor had been reviewed by radiation workers at NPPs and their opinions had been collected. Operating procedure will be written and distributed to every NPP sites. Radiation Alarm Monitor will be modified for use under the specific environmental conditions of each site. It will be distributed to NPP sites and will be used by radiation workers

  4. Corruption Clubs: Endogenous Thresholds in Corruption and Development

    OpenAIRE

    M. Emranul Haque; Richard Kneller

    2005-01-01

    The relationship between corruption and economic development is characterised by three stylised facts: (i) a strong negative correlation between corruption and development (ii) countries can remain trapped in high corruption-low development or low corruption-high development equilibria (iii) amongst intermediate levels of development corruption levels are more variable, some countries have high corruption and others low corruption. This paper argues that existing models are consistent with th...

  5. Calculation of abort thresholds for the Beam Loss Monitoring System of the Large Hadron Collider at CERN

    CERN Document Server

    Nemcic, Martin; Dehning, Bernd

    The Beam Loss Monitoring (BLM) System is one of the most critical machine protection systems for the Large Hadron Collider (LHC) at the European Organization for Nuclear Research (CERN), Switzerland. Its main purpose is to protect the superconducting magnets from quenches and other equipment from damage by requesting a beam abort when the measured losses exceed any of the predefined threshold levels. The system consist of circa 4000 ionization chambers which are installed around the 27 kilometres ring (LHC). This study aims to choose a technical platform and produce a system that addresses all of the limitations with the current system that is used for the calculation of the LHC BLM abort threshold values. To achieve this, a comparison and benchmarking of the Java and .NET technical platforms is performed in order to establish the most suitable solution. To establish which technical platform is a successful replacement of the current abort threshold calculator, comparable prototype systems in Java and .NET we...

  6. Using Johnson Distribution for Automatic Threshold Setting in Wind Turbine Condition Monitoring System

    DEFF Research Database (Denmark)

    Marhadi, Kun Saptohartyadi; Skrimpas, Georgios Alexandros

    2014-01-01

    not rep- resent the whole operating conditions of a turbine, which re- sults in uncertainty in the parameters of the fitted probabil- ity distribution and the thresholds calculated. In this study Johnson distribution is used to identify shape, location, and scale parameters of distribution that can best...... fit vibration data. This study shows that using Johnson distribution can elim- inate testing or fitting various distributions to the data, and have more direct approach to obtain optimal thresholds. To quantify uncertainty in the thresholds due to limited data, im- plementations with bootstrap method...

  7. Assessing marginal, threshold and net effects of financial globalisation on financial development in Africa

    OpenAIRE

    Asongu, Simplice

    2017-01-01

    The present inquiry contributes to extant literature by simultaneously accounting for variations in financial development and financial globalisation in the assessment of hypothetical initial financial development conditions for the rewards of financial globalisation. For this purpose, we examine marginal, threshold and net effects of financial globalisation on financial development throughout the conditional distributions of financial development. The empirical evidence is based on contempor...

  8. Detection and classification of alarm threshold violations in condition monitoring systems working in highly varying operational conditions

    Science.gov (United States)

    Strączkiewicz, M.; Barszcz, T.; Jabłoński, A.

    2015-07-01

    All commonly used condition monitoring systems (CMS) enable defining alarm thresholds that enhance efficient surveillance and maintenance of dynamic state of machinery. The thresholds are imposed on the measured values such as vibration-based indicators, temperature, pressure, etc. For complex machinery such as wind turbine (WT) the total number of thresholds might be counted in hundreds multiplied by the number of operational states. All the parameters vary not only due to possible machinery malfunctions, but also due to changes in operating conditions and these changes are typically much stronger than the former ones. Very often, such a behavior may lead to hundreds of false alarms. Therefore, authors propose a novel approach based on parameterized description of the threshold violation. For this purpose the novelty and severity factors are introduced. The first parameter refers to the time of violation occurrence while the second one describes the impact of the indicator-increase to the entire machine. Such approach increases reliability of the CMS by providing the operator with the most useful information of the system events. The idea of the procedure is presented on a simulated data similar to those from a wind turbine.

  9. Detection and classification of alarm threshold violations in condition monitoring systems working in highly varying operational conditions

    International Nuclear Information System (INIS)

    Strączkiewicz, M; Barszcz, T; Jabłoński, A

    2015-01-01

    All commonly used condition monitoring systems (CMS) enable defining alarm thresholds that enhance efficient surveillance and maintenance of dynamic state of machinery. The thresholds are imposed on the measured values such as vibration-based indicators, temperature, pressure, etc. For complex machinery such as wind turbine (WT) the total number of thresholds might be counted in hundreds multiplied by the number of operational states. All the parameters vary not only due to possible machinery malfunctions, but also due to changes in operating conditions and these changes are typically much stronger than the former ones. Very often, such a behavior may lead to hundreds of false alarms. Therefore, authors propose a novel approach based on parameterized description of the threshold violation. For this purpose the novelty and severity factors are introduced. The first parameter refers to the time of violation occurrence while the second one describes the impact of the indicator-increase to the entire machine. Such approach increases reliability of the CMS by providing the operator with the most useful information of the system events. The idea of the procedure is presented on a simulated data similar to those from a wind turbine. (paper)

  10. Financial globalisation and financial development in Africa: assessing marginal, threshold and net effects

    OpenAIRE

    Simplice Asongu; Lieven De Moor

    2015-01-01

    The present inquiry contributes to extant literature by simultaneously accounting for variations in financial development and financial globalisation in the assessment of hypothetical initial financial development conditions for the rewards of financial globalisation. The policy relevance for assessing these variations simultaneously builds on the intuition that, thresholds for financial development benefits of financial globalisation may also be contingent on initial levels of financial deve...

  11. Using Johnson Distribution for Automatic Threshold Setting in Wind Turbine Condition Monitoring System

    Science.gov (United States)

    2014-12-23

    required using a Markov Chain Monte Carlo ( MCMC ) method. In (Marhadi et al., 2012), they used a Metropolis method to sample the posterior 9 ANNUAL...efficient method to sample the posterior distribution. In case of using an MCMC method, there is not yet a well established method to determine how...θ|x) is the posterior PDF of θ given x, l(θ|x) = Figure 12. Confidence bounds of ISO RMS thresholds from bootstrapping various sampled data in 2 power

  12. Legislating thresholds for drug trafficking: a policy development case study from New South Wales, Australia.

    Science.gov (United States)

    Hughes, Caitlin Elizabeth; Ritter, Alison; Cowdery, Nicholas

    2014-09-01

    Legal thresholds are used in many parts of the world to define the quantity of illicit drugs over which possession is deemed "trafficking" as opposed to "possession for personal use". There is limited knowledge about why or how such laws were developed. In this study we analyse the policy processes underpinning the introduction and expansion of the drug trafficking legal threshold system in New South Wales (NSW), Australia. A critical legal and historical analysis was undertaken sourcing data from legislation, Parliamentary Hansard debates, government inquiries, police reports and research. A timeline of policy developments was constructed from 1970 until 2013 outlining key steps including threshold introduction (1970), expansion (1985), and wholesale revision (1988). We then critically analysed the drivers of each step and the roles played by formal policy actors, public opinion, research/data and the drug trafficking problem. We find evidence that while justified as a necessary tool for effective law enforcement of drug trafficking, their introduction largely preceded overt police calls for reform or actual increases in drug trafficking. Moreover, while the expansion from one to four thresholds had the intent of differentiating small from large scale traffickers, the quantities employed were based on government assumptions which led to "manifest problems" and the revision in 1988 of over 100 different quantities. Despite the revisions, there has remained no further formal review and new quantities for "legal highs" continue to be added based on assumption and an uncertain evidence-base. The development of legal thresholds for drug trafficking in NSW has been arbitrary and messy. That the arbitrariness persists from 1970 until the present day makes it hard to conclude the thresholds have been well designed. Our narrative provides a platform for future policy reform. Copyright © 2014 Elsevier B.V. All rights reserved.

  13. Thresholds in Ecological and Social-Ecological Systems: a Developing Database

    Directory of Open Access Journals (Sweden)

    Brian Walker

    2004-12-01

    Full Text Available Increasing interest in regime shifts in ecological and linked social-ecological systems (SESs has placed a strong focus on the thresholds of change. However, research into this topic has been hampered by a lack of empirical data. This paper describes a developing database established to address this need. The database is freely available and comprises a set of summarized published examples and a searchable bibliographic database of publications on the topic. Thresholds in the database are characterized in terms of a standardized set of 24 descriptors, including the variables along which they occur, the variables that change, and the factors that have driven the change. Readers are encouraged to contribute new examples. Examples range from conceptual models to empirical evidence. The former predominate in the literature and, although they make valuable contributions and will continue to be included, the intention is build up the number of examples based on data. Examples are presented in terms of whether the threshold occurs in the ecological system, the social system, or both, and the direction of interactions between systems. The paper concludes with some initial observations on thresholds based on the examples included so far, and poses some questions for future research. Research on a typology of thresholds is a priority topic in the emerging area of "sustainability science" and it requires a rich database of empirical data.

  14. Official Development Assistance and its Impact on Governance in short term: The Threshold theory

    Directory of Open Access Journals (Sweden)

    Dr. Said JAOUADI

    2013-07-01

    This article is based on a solid econometric methodology for the determination of aid thresholds with respect to its impact on governance in developing countries. In this paper, I selected a basket comprising the Arab and sub-Saharan African countries, and I have distinguished between the short term and long term impacts of aid.

  15. The Development of Low Threshold Laser Arrays and Their Applications in Parallel Optical Datalinks

    Science.gov (United States)

    Zhao, Hanmin

    We present the analytical and experimental study for the development of ultra-low threshold InGaAs/GaAs/AlGaAs quantum well semiconductor lasers and laser arrays grown on non planar substrates by MOCVD. This study has resulted in the demonstration of some of the lowest threshold currents and current densities yet reported as well as the demonstration of multichannel optical datalinks working at 1Gbit/sec/channel. The gain properties of the InGaAs/GaAs strained quantum wells and the lasing properties of InGaAs/GaAs lasers were theoretically analysed. Using MOCVD growth technique, the growth condition for InGaAs/GaAs quantum wells and InGaAs/GaAs broad area lasers were optimized. InGaAs/GaAs broad area laser threshold current density as low as 56 A/cm^{-2} were obtained. The growth and doping properties of InGaAs/GaAs quantum wells and AlGaAs bulk layer on non planar substrates were studied and the unique properties we learned from the above study were used to design and fabricate a new buried heterostructure InGaAs/GaAs laser for low threshold and high efficiency operation. Record low threshold current of 0.5 mA and 0.6 mA were obtained for as cleaved DQW lasers and SQW lasers respectively. HR coated SQW laser threshold currents as low as 0.15 mA were obtained which is the lowest reported threshold current in a diode laser. This new technique produces high yield and high laser uniformity because of the simple growth and processing procedures involved. Highly uniform InGaAs/GaAs SQW and DQW laser arrays with sub-milliampere threshold currents were obtained. Using the above low threshold lasers, a unique three terminal laser structure that is suitable for high speed, high efficiency, large signal, digital modulation was investigated. Three terminal laser arrays were used in a wide bandwidth parallel optical datalink system. High data transfer rate (1GBit/sec/channel) and low bit error rate (BER) ({<}10^{-13}) with large phase margin were obtained. This parallel

  16. Slug control in Australian canola: monitoring, molluscicidal baits and economic thresholds.

    Science.gov (United States)

    Nash, Michael A; Thomson, Linda J; Hoffmann, Ary A

    2007-09-01

    Exotic slugs have become serious pests of canola, at establishment, in Southern Australian high-rainfall cropping zones. Slugs were monitored using relatively inexpensive 300 mm x 300 mm terracotta tiles acting as refuges. An investigation was made of the effects of the time of application of chelated iron baits on the slug species Deroceras reticulatum Müller and Lehmannia nyctelia Bourguignat. Baits reduced the number of surface-active slug species. A single application at sowing provided greater efficacy than one application before sowing, and efficacy was comparable with that of two applications. Canola seedling densities showed a negative response to D. reticulatum numbers; the presence of even one individual per refuge trap reduced seedling numbers below optimum densities. Thistles and other vegetation were associated with increased numbers of slugs. European guidelines for slug monitoring and damage appear to be at least partly applicable to Australian conditions. 2007 Society of Chemical Industry

  17. Temperature thresholds and thermal requirements for development of Nasonovia ribisnigri (Hemiptera: Aphididae).

    Science.gov (United States)

    Diaz, Beatriz Maria; Muñiz, Mariano; Barrios, Laura; Fereres, Alberto

    2007-08-01

    Early detection of Nasonovia ribisnigri (Mosley) (Hemiptera: Aphididae) on lettuce is of primary importance for its effective control. Temperature thresholds for development of this pest were estimated using developmental rates [r(T)] at different constant temperatures (8, 12, 16, 20, 24, 26, and 28 degrees C). Observed developmental rates data and temperature were fitted to two linear (Campbell and Muñiz and Gil) and a nonlinear (Lactin) models. Lower temperature threshold estimated by the Campbell model was 3.6 degrees C for apterous, 4.1 degrees C for alates, and 3.1 degrees C for both aphid adult morphs together. Similar values of the lower temperature threshold were obtained with the Muñiz and Gil model, for apterous (4.0 degrees C), alates (4.2 degrees C), and both adult morphs together (3.7 degrees C) of N. ribisnigri. Thermal requirements of N. ribisnigri to complete development were estimated by Campbell and Muñiz and Gil models for apterous in 125 and 129 DD and for both adult morphs together in 143 and 139 DD, respectively. For complete development from birth to adulthood, the alate morph needed 15-18 DD more than the apterous morph. The lower temperature threshold determined by the Lactin model was 5.3 degrees C for alates, 2.3 degrees C for apterous, and 1.9 degrees C for both adult morphs together. The optimal and upper temperature thresholds were 25.2 and 33.6 degrees C, respectively, for the alate morph, 27 and 35.9 degrees C, respectively, for the apterous morph, and 26.1 and 35.3 degrees C, respectively, for the two adult morphs together. The Campbell model provided the best fit to the observed developmental rates data of N. ribisnigri. This information could be incorporated in forecasting models of this pest.

  18. An Analytic Approach to Developing Transport Threshold Models of Neoclassical Tearing Modes in Tokamaks

    International Nuclear Information System (INIS)

    Mikhailovskii, A.B.; Shirokov, M.S.; Konovalov, S.V.; Tsypin, V.S.

    2005-01-01

    Transport threshold models of neoclassical tearing modes in tokamaks are investigated analytically. An analysis is made of the competition between strong transverse heat transport, on the one hand, and longitudinal heat transport, longitudinal heat convection, longitudinal inertial transport, and rotational transport, on the other hand, which leads to the establishment of the perturbed temperature profile in magnetic islands. It is shown that, in all these cases, the temperature profile can be found analytically by using rigorous solutions to the heat conduction equation in the near and far regions of a chain of magnetic islands and then by matching these solutions. Analytic expressions for the temperature profile are used to calculate the contribution of the bootstrap current to the generalized Rutherford equation for the island width evolution with the aim of constructing particular transport threshold models of neoclassical tearing modes. Four transport threshold models, differing in the underlying competing mechanisms, are analyzed: collisional, convective, inertial, and rotational models. The collisional model constructed analytically is shown to coincide exactly with that calculated numerically; the reason is that the analytical temperature profile turns out to be the same as the numerical profile. The results obtained can be useful in developing the next generation of general threshold models. The first steps toward such models have already been made

  19. Analysis of the Threshold Effect of Financial Development on China’s Carbon Intensity

    Directory of Open Access Journals (Sweden)

    Xiongfeng Pan

    2016-03-01

    Full Text Available Using panel data on 30 provinces in China from 2005 to 2012, this paper conducts an empirical test on the threshold effect of the relationship between financial development and carbon emission intensity from the perspectives of financial scale and financial efficiency. The results show that at a low level of per capita GDP, the expansion of the financial scale and the enhancement of financial efficiency will increase carbon intensity. When the per capita GDP is greater than the threshold value (RMB 37,410, the expansion of the financial scale will also increase carbon intensity, but the potency of this effect will be weaker. At the same time, the improvement of financial efficiency will help reduce carbon intensity. Most provinces with per capita GDP greater than the threshold value (RMB 37,410 are located in the eastern coastal areas of China, whereas most provinces with per capita GDP less than the threshold value are located in the central and western areas of China. Both raising the level of openness and improving the industrial structure will have significantly positive effects on carbon intensity.

  20. Development of Electrocardiograph Monitoring System

    Directory of Open Access Journals (Sweden)

    Rosli Khairul Affendi

    2018-01-01

    Full Text Available Electrocardiograph (ECG monitoring system is one of the diagnostic tools which can help in reduce the risk of heart attack. A cardiologist may be able to determine heart condition from the ECG signal that recorded from subject. The purpose was to design an ECG monitoring system which consists of ECG circuit and digital signal processing system to deny the unwanted signal. In general, the ECG signal is nature weak and only around 1mV amplitude. Therefore filter and amplifier circuits were designed into 3 stages with a total gain of 1000 to bring the signal to around 1V. Circuit designed included of instrumentation amplifier, bandpass filter and notch filter. The frequency bandwidth of ECG is between 0.05Hz until 100Hz. Schematic circuit was tested by software simulation before proceeding to hardware implementation. Simulation analysis was done by using Software Proteus 8 Professional while the further signal processing was done in MATLAB software environment. A PQRST ECG waveform can be seen clearly after digital filtering stage in MATLAB environment. Digital signal processing in MATLAB software included of pre-filtering, Fast Fourier transform and peak detection. As conclusion, the time interval between peaks can be determined automatically which can provide useful information in clinical aspect.

  1. Development of a thresholding algorithm for calcium classification at multiple CT energies

    Science.gov (United States)

    Ng, LY.; Alssabbagh, M.; Tajuddin, A. A.; Shuaib, I. L.; Zainon, R.

    2017-05-01

    The objective of this study was to develop a thresholding method for calcium classification with different concentration using single-energy computed tomography. Five different concentrations of calcium chloride were filled in PMMA tubes and placed inside a water-filled PMMA phantom (diameter 10 cm). The phantom was scanned at 70, 80, 100, 120 and 140 kV using a SECT. CARE DOSE 4D was used and the slice thickness was set to 1 mm for all energies. ImageJ software inspired by the National Institute of Health (NIH) was used to measure the CT numbers for each calcium concentration from the CT images. The results were compared with a developed algorithm for verification. The percentage differences between the measured CT numbers obtained from the developed algorithm and the ImageJ show similar results. The multi-thresholding algorithm was found to be able to distinguish different concentrations of calcium chloride. However, it was unable to detect low concentrations of calcium chloride and iron (III) nitrate with CT numbers between 25 HU and 65 HU. The developed thresholding method used in this study may help to differentiate between calcium plaques and other types of plaques in blood vessels as it is proven to have a good ability to detect the high concentration of the calcium chloride. However, the algorithm needs to be improved to solve the limitations of detecting calcium chloride solution which has a similar CT number with iron (III) nitrate solution.

  2. Critical function monitoring system algorithm development

    International Nuclear Information System (INIS)

    Harmon, D.L.

    1984-01-01

    Accurate critical function status information is a key to operator decision-making during events threatening nuclear power plant safety. The Critical Function Monitoring System provides continuous critical function status monitoring by use of algorithms which mathematically represent the processes by which an operating staff would determine critical function status. This paper discusses in detail the systematic design methodology employed to develop adequate Critical Function Monitoring System algorithms

  3. Development of leakage monitoring system using radioisotopes

    Energy Technology Data Exchange (ETDEWEB)

    Lee, J. C.; Lee, D. S. [Seoil College, Seoul (Korea); Cho, Y. S. [Konyang University, Nonsan (Korea); Shin, S. K. [Sungkyunkwan Univ., Seoul (Korea)

    2000-04-01

    This study is to development the potable neutron back-scattering gauge for leakage and detecting liquid interface of an oil and liquid tank, using a radioisotopes. For this purpose, small sized, light weight potable gauge is to be designed as to develope neutron shielding mechanism, low power supply circuit, high voltage circuit, measurement circuit, and operating handle etc. The user will be able to set the duration of the time interval, the scale, the high voltage, the threshold, the channel window, the selection whether the data storage or not, the selection whether the scale, high voltage, threshold and window fix or not at any time. The counted pulse will be displayed with the numerical value and the line bar. The gauge will be able to connect to an IBM compatible PC via a serial port, power will be supplied by internal battery. 9 refs., 28 figs., 10 tabs. (Author)

  4. Development of Comprehension Monitoring in Beginner Readers

    Science.gov (United States)

    Yeomans-Maldonado, Gloria

    2017-01-01

    The current study was designed to understand the development of comprehension monitoring among beginner readers from first to third grade, and to determine the extent to which first graders' comprehension monitoring predicts reading comprehension in grade three. Participants were 113 children (57% female) from four US states who were followed from…

  5. Effects of prenatal stress on seizure threshold and development of hippocampus in mice offspring

    Directory of Open Access Journals (Sweden)

    m kahali

    2015-07-01

    Results: The results showed a significant increase in seizure threshold in offspring whose mothers were under stress, compared with offspring whose mothers were not under stress. Average thickness of hippocampal pyramidal and granular in the experimental group than in the control group showed a significant increase (p<0.001. in addition, mean thickness of pyramidal and granular layers of hippocampus significantly increased in the experimental group compared to control group. The number of cells in hippocampal and granular layers significantly decreased in the experimental group when compared with control and sham groups (p<0.001. Conclusion: Prenatal stress can cause an increase in seizure threshold and also impair offspring's development and their hippocampal structure.

  6. Development of a criticality monitoring and alarm system

    International Nuclear Information System (INIS)

    Egey, Julio; Izraelevitch, Federico H.; Matatagui, Emilio

    2009-01-01

    In this work we are presenting the development of a Criticality Monitor and Alarm System (SIMAC). It monitors the burst of radiation produced during such an accident and triggers an alarm for evacuation in case the radiation exceeds a pre-established threshold. It consists of two subsystems, one for gamma rays and the other for neutrons. Each subsystem has three independent detectors modules. Each module is composed of an ion chamber plus its associated electronics, feeding a logic module that in turn would trigger the evacuation alarm. An additional feature is a PC interface for data acquisition. The radiation detectors are ion chambers working in current mode. The electronics associated to each detector can manage a wide signal range using a logarithmic converter. (author)

  7. Meteorological and Hydrogeological Warning Thresholds in the operational bulletins of the Albanian National Centre for Forecast and Monitoring of Natural Risks

    Science.gov (United States)

    Marku, M.; Mustaqi, V.; Abazi, E.; Zaimi, K.; Vako, E.; Gjonaj, M.; Hoxhaj, F.; Deda, M.; Fiori, E.; Massabò, M.; Castelli, F.

    2012-04-01

    values. The soil moisture conditions are computed by the operational probabilistic forecasting model Flood Proofs, implemented by CIMA for the Drin and lake of Shkodra basins. Flood Proof is also used to forecast river discharge at the mains hydraulic cross-section of the basins; the third level of assessment is based on discharge thresholds. All the meteorological and hydrological forecast models are available in the open source web-based platform DEWETRA (DEWETRA has been developed by CIMA on behalf of the Italian department of Civil Protection who uses it routinely for its activities of forecast, monitor and surveillance of Natural Risks) Meteo-Warning classification is chosen to be similar to MeteoAlarm; in the future the Center wish to participate in this European activity. Hydrological warnings are expressed in terms of risk scenarios.

  8. Development of high damage threshold multilayer thin film beam combiner for laser application

    Energy Technology Data Exchange (ETDEWEB)

    Nand, Mangla, E-mail: mnand@rrcat.gov.in; Babita,; Jena, S.; Tokas, R. B.; Rajput, P.; Thakur, S.; Jha, S. N.; Sahoo, N. K. [Atomic& Molecular Physics Division, Bhabha Atomic research Centre, Mumbai-400 085 (India); Mukharjee, C. [Mechanical and Optics Services Section, Raja Ramanna Centre for Advanced Technology, Indore, 452 013 (India)

    2016-05-23

    A polarized wavelength multiplexer with high laser induced damage threshold has been developed to combine two laser beam of high peak power in the visible region. The present wavelength multiplexer is a multilayer thin film device deposited by reactive electron beam evaporation. The developed device is capable of combining two p-polarized laser beams of peak power density of 1.7 GW/cm{sup 2} at an angle of incidence of 45°. High transmission (T> 90%) in high pass region and high reflection (R> 99%) in stop band region have been achieved.

  9. Development of radioactive surface contamination monitor

    International Nuclear Information System (INIS)

    Hashimoto, Tadao; Hasegawa, Toru; Fukumoto, Keisuke; Ooki, Yasushi

    2008-01-01

    In the radiation facilities such as nuclear power plants, surface contamination of the people accessing or articles conveyed in and out of the radiation controlled areas is detected and monitored by installing contamination monitors at the boundary of controlled areas and uncontrolled areas against the expansion of the radioactive materials to out of the facilities. It is required for the surface contamination of articles to be tightened of control criteria as 'Guidelines for discrimination ways of nonradioactive waste (not classified as radioactive waste) generated from nuclear power plants' (hereinafter referred to as 'the Guideline') was established by the Nuclear and Industrial Safety Agency of the Ministry of Economy, Trade and Industry in August, 2005. It predicts that the control criteria of monitors other than article monitors are also tightened in the future. Fuji electric has been fabricating and delivering surface contamination detecting monitors. Now we are developing the new contamination monitor corresponding to the tightening of the control criteria. 'Large article transfer monitor', 'Clothing monitor' and 'Body surface contamination monitor' are introduced in this article. (author)

  10. Perspectives on the relevance of the circadian time structure to workplace threshold limit values and employee biological monitoring.

    Science.gov (United States)

    Smolensky, Michael H; Reinberg, Alain E; Sackett-Lundeen, Linda

    2017-01-01

    The circadian time structure (CTS) and its disruption by rotating and nightshift schedules relative to work performance, accident risk, and health/wellbeing have long been areas of occupational medicine research. Yet, there has been little exploration of the relevance of the CTS to setting short-term, time-weighted, and ceiling threshold limit values (TLVs); conducting employee biological monitoring (BM); and establishing normative reference biological exposure indices (BEIs). Numerous publications during the past six decades document the CTS substantially affects the disposition - absorption, distribution, metabolism, and elimination - and effects of medications. Additionally, laboratory animal and human studies verify the tolerance to chemical, biological (contagious), and physical agents can differ extensively according to the circadian time of exposure. Because of slow and usually incomplete CTS adjustment by rotating and permanent nightshift workers, occupational chemical and other contaminant encounters occur during a different circadian stage than for dayshift workers. Thus, the intended protection of some TLVs when working the nightshift compared to dayshift might be insufficient, especially in high-risk settings. The CTS is germane to employee BM in that large-amplitude predictable-in-time 24h variation can occur in the concentration of urine, blood, and saliva of monitored chemical contaminants and their metabolites plus biomarkers indicative of adverse xenobiotic exposure. The concept of biological time-qualified (for rhythms) reference values, currently of interest to clinical laboratory pathology practice, is seemingly applicable to industrial medicine as circadian time and workshift-specific BEIs to improve surveillance of night workers, in particular. Furthermore, BM as serial assessments performed frequently both during and off work, exemplified by employee self-measurement of lung function using a small portable peak expiratory flow meter, can

  11. Personnel neutron monitoring developments at LLL

    International Nuclear Information System (INIS)

    Griffith, R.V.; Fisher, J.C.; Hankins, D.E.; Miller, D.E.

    1978-01-01

    Approximately 40 employees at LLL work in areas where personnel neutron monitoring is necessary. The dose rate in these areas is low, rarely exceeding 0.5 rem per year. However, the wide variety of neutron environments (dt neutron generators; a 3 MW pool type reactor; a 100 MeV electron Linac; and a number of vaults and glove boxes where alpha, n and spontaneous fission sources are stored) makes the neutron monitoring task difficult. As a result, we have been studying potential developments in personnel dosimetry and neutron field monitoring, particularly as they relate to proposed changes in the neutron quality factor and the implied reduction in allowable dose limits

  12. Development of picosecond pulsed electron beam monitor

    International Nuclear Information System (INIS)

    Hosono, Y.; Nakazawa, M.; Ueda, T.; Kobayasi, T.; Yosida, Y.; Ohkuma, J.; Okuda, S.; Suemine, S.

    1993-01-01

    For the picosecond pulsed electron beam of a linear accelerator a simple monitor using an electric connector has been developed which is constructed with SMA, BNC, N type electric connector through pipe (inner diameter = 50 mm or 100 mm). Under the measurement conditions of peak current (26A-900A) and narrow pulse width (Pw = 10 ps(FWHM), Pw = 30 ps(FWHM)), the following characteristics of this monitor were obtained, (A) rise time is less than 25 ps (B) the amplitude of the monitor output pulse is proportional directly to the area of cross section of the electrode. (author)

  13. Design and development of wireless baby monitors

    OpenAIRE

    Jen, Yi-Kuo Eric

    2008-01-01

    The Philips DAP SCD510, SCD520, SCD530, and SCD540 1.8GHz/1.9GHz DECT Digital Wireless Baby Monitors are part of the next generation digital baby monitor products that emphasize on small form factor, innovative feature set, and cost effective bill of materials. New product features include wideband audio, ambient relative humidity measurement, and carbon monoxide detection. The objectives of this project are to design and develop these four baby monitor products and begin mass production for ...

  14. Continuous Seismic Threshold Monitoring

    Science.gov (United States)

    1992-05-31

    17th Street University Park Suite 1450 Los Angeles, CA 90089-0741 Arlington, VA 22209-2308 Prof. Shelton Alexander Dr. G.A. Bollinger Geosciences...Bernard Massinon, Dr. Pierre Mechler Societe Radiomana 27 rue Claude- Bernard 75005 Paris , FRANCE (2 Copies) Dr. Svein Mykkeltveit NTNT/NORSAR P.O. Box

  15. Development of river sediment monitoring in Croatia

    Science.gov (United States)

    Frančišković-Bilinski, Stanislav; Bilinski, Halka; Mlakar, Marina; Maldini, Krešimir

    2017-04-01

    have significant anthropogenic concentrations on several locations. With other studied elements situation is much better and anthropogenic influence is not so significant. Based on own research and experience and comparing them with existing sediment quality criteria worldwide, within the current phase of monitoring program it is aimed to propose threshold values for mentioned elements, what would be base for Croatian National legislative on sediment quality. [1] Prohić, E. and Juračić, M. (1989): Heavy metals in sediments - Problems concerning determination of the anthropogenic influence. Study in the Krka River Estuary, Eastern Adriatic Coast, Yugoslavia. Environmental Geology Water Science, 13(2), 145-151. [2] Franči\\vsković-Bilinski, S. (2005): Geochemistry of stream sediments in Kupa River drainage basin [In Croatian] / Doctoral thesis. University of Zagreb, Croatia. [3] Franči\\vsković-Bilinski, S., Bilinski, H., Maldini, K. (2015): Establishing of monitoring of river sediments in Croatia. Contaminated sediments: Environmental Chemistry, Ecotoxicology and Engineering - Program and Abstract Book, Congressi Stefano Franscini, Ascona, Switzerland, 73-73.

  16. Monitoring cropping patterns using sequential Landsat imagery: An adaptive threshold approach and its application in Phoenix, AZ

    Science.gov (United States)

    Fan, C.; Zheng, B.; Myint, S. W.; Aggarwal, R.

    2014-12-01

    Cropping intensity is the number of crops grown per year per unit area of cropland. Since 1970s, the Phoenix Active Management Area (AMA) has undergone rapid urbanization mostly via land conversions from agricultural prime lands to urban land use. Agricultural intensification, or multiple cropping, has been observed globally as a positive response to the growing land pressure as a consequence of urbanization and exploding population. Nevertheless, increased cropping intensity has associated local, regional, and global environmental outcomes such as degradation of water quality and soil fertility. Quantifying spatio-temporal patterns of cropping intensity can serve as a first step towards understanding these environmental problems and developing effective and sustainable cropping strategies. In this study, an adaptive threshold method was developed to measure the cropping intensity in the Phoenix AMA from 1995 to 2010 at five-year intervals. The method has several advantages in terms of (1) minimization of errors arising from missing data and noise; (2) ability to distinguish growing cycles from multiple small false peaks in a vegetation index time series; (3) flexibility when dealing with temporal profiles with diffing numbers of observations. The adaptive threshold approach measures the cropping intensity effectively with overall accuracies higher than 97%. Results indicate a dramatic decline in the area of total croplands, single crops, and double crops. A small land conversion was witnessed from single crops into double crops from 1995 to 2000, whereas a reverse trend was observed from 2005 to 2010. Changes in cropping intensity can affect local water consumption. Therefore, joint investigation of cropping patterns and agricultural water use can provide implications for future water demand, which is an increasingly critical issue in this rapidly expanding desert city.

  17. Development of conformal respirator monitoring technology

    International Nuclear Information System (INIS)

    Shonka, J.J.; Weismann, J.J.; Logan, R.J.

    1997-04-01

    This report summarizes the results of a Small Business Innovative Research Phase II project to develop a modular, surface conforming respirator monitor to improve upon the manual survey techniques presently used by the nuclear industry. Research was performed with plastic scintillator and gas proportional modules in an effort to find the most conducive geometry for a surface conformal, position sensitive monitor. The respirator monitor prototype developed is a computer controlled, position-sensitive detection system employing 56 modular proportional counters mounted in molds conforming to the inner and outer surfaces of a commonly used respirator (Scott Model 801450-40). The molds are housed in separate enclosures and hinged to create a open-quotes waffle-ironclose quotes effect so that the closed monitor will simultaneously survey both surfaces of the respirator. The proportional counter prototype was also designed to incorporate Shonka Research Associates previously developed charge-division electronics. This research provided valuable experience into pixellated position sensitive detection systems. The technology developed can be adapted to other monitoring applications where there is a need for deployment of many traditional radiation detectors

  18. Improving occupational injury surveillance by using a severity threshold: development of a new occupational health indicator.

    Science.gov (United States)

    Sears, Jeanne M; Bowman, Stephen M; Rotert, Mary; Blanar, Laura; Hogg-Johnson, Sheilah

    2016-06-01

    Hospital discharge data are used for occupational injury surveillance, but observed hospitalisation trends are affected by trends in healthcare practices and workers' compensation coverage that may increasingly impair ascertainment of minor injuries relative to severe injuries. The objectives of this study were to (1) describe the development of a severe injury definition for surveillance purposes and (2) assess the impact of imposing a severity threshold on estimated occupational and non-occupational injury trends. Three independent methods were used to estimate injury severity for the severe injury definition. 10 population-based hospital discharge databases were used to estimate trends (1998-2009), including the National Hospital Discharge Survey (NHDS) and State Inpatient Databases (SID) from the Healthcare Cost and Utilization Project (HCUP), Agency for Healthcare Research and Quality. Negative binomial regression was used to model injury trends with and without severity restriction and to test trend divergence by severity. Trend estimates for occupational injuries were biased downwards in the absence of severity restriction, more so than for non-occupational injuries. Imposing a severity threshold resulted in a markedly different historical picture. Severity restriction can be used as an injury surveillance methodology to increase the accuracy of trend estimates, which can then be used by occupational health researchers, practitioners and policy-makers to identify prevention opportunities and to support state and national investments in occupational injury prevention efforts. The newly adopted state-based occupational health indicator, 'Work-Related Severe Traumatic Injury Hospitalizations', incorporates a severity threshold that will reduce temporal ascertainment threats to accurate trend estimates. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  19. Analysis of different tumor volume thresholds of insignificant prostate cancer and their implications for active surveillance patient selection and monitoring

    Directory of Open Access Journals (Sweden)

    Dong Hoon Lee

    2014-06-01

    Conclusions: Although the TV thresholds of the two definitions of IPC vary only slightly, this difference was enough to result in different clinical course if Gleason grade 4/5 disease was present. Therefore, the updated IPC TV threshold should be carefully applied as clinical parameter for active surveillance.

  20. The development of digital monitoring technique

    International Nuclear Information System (INIS)

    Koo, In Soo; Kim, D. H.; Kim, J. S.; Kim, C. H.; Kim, G. O.; Park, H. Y.; Suh, S. Y.; Sung, S. H.; Song, S. J.; Lee, C. K.; Jang, G. S.; Hur, S.

    1997-08-01

    A study has been performed for advanced DSP technology for the digital nuclear I and C systems for the monitoring and diagnosis techniques for high-pressurized structures integrity in NSSS. In the development of advanced DSP technology, real time process, communication network and signal validation were selected as the essential technologies of the digital signal process, and the requirements and methodology for the application of these technologies in NPP were established through technical analysis. Based on its results, the DPIS and the signal validation algorithm were developed. For the real-time process, the necessary requirements were define and the methodology of real-time software modeling was developed. For the communication network, the methodology of selection of the communication technique and developing procedure were established with an extraction of requirements. Functions, requirements, structure and technical specification were developed for the DPIS, and a real-time signal validation algorithm was developed and implemented for the signal validation. In a study on monitoring techniques for abnormal conditions, test and experimental facilities have been set up in order to carry out the required tests during research activities. Studies concentrated on how to acquire proper vibration or emission signals from mechanical structures and equipments, and to diagnose effectively the abnormal conditions of high pressure structure integrity. The algorithms of automatic signal analysis and diagnosis for abnormal conditions have been developed in this study to assist the operator's monitoring and diagnosis activities on structure integrity using new technologies. (author). 23 refs., 68 tabs., 196 figs

  1. The development of digital monitoring technique

    Energy Technology Data Exchange (ETDEWEB)

    Koo, In Soo; Kim, D. H.; Kim, J. S.; Kim, C. H.; Kim, G. O.; Park, H. Y.; Suh, S. Y.; Sung, S. H.; Song, S. J.; Lee, C. K.; Jang, G. S.; Hur, S.

    1997-08-01

    A study has been performed for advanced DSP technology for the digital nuclear I and C systems for the monitoring and diagnosis techniques for high-pressurized structures integrity in NSSS. In the development of advanced DSP technology, real time process, communication network and signal validation were selected as the essential technologies of the digital signal process, and the requirements and methodology for the application of these technologies in NPP were established through technical analysis. Based on its results, the DPIS and the signal validation algorithm were developed. For the real-time process, the necessary requirements were define and the methodology of real-time software modeling was developed. For the communication network, the methodology of selection of the communication technique and developing procedure were established with an extraction of requirements. Functions, requirements, structure and technical specification were developed for the DPIS, and a real-time signal validation algorithm was developed and implemented for the signal validation. In a study on monitoring techniques for abnormal conditions, test and experimental facilities have been set up in order to carry out the required tests during research activities. Studies concentrated on how to acquire proper vibration or emission signals from mechanical structures and equipments, and to diagnose effectively the abnormal conditions of high pressure structure integrity. The algorithms of automatic signal analysis and diagnosis for abnormal conditions have been developed in this study to assist the operator`s monitoring and diagnosis activities on structure integrity using new technologies. (author). 23 refs., 68 tabs., 196 figs.

  2. Developed vibration waveform monitoring unit for CBM

    International Nuclear Information System (INIS)

    Hamada, T.; Hotsuta, K.; Hirose, I.; Morita, E.

    2007-01-01

    In nuclear power plants, many rotating machines such as pumps and fans are in use. Shikoku Research Institute Inc. has recently developed easy-to-use tools to facilitate the maintenance of such equipment. They include a battery-operated vibration waveform monitoring unit which allows unmanned vibration monitoring on a regular basis and data collection even from intermittently operating equipment, a waveform data collector which can be used for easy collection, storage, control, and analysis of raw vibration waveform data during normal operation, and vibration analysis and evaluation tools. A combination of these tools has a high potential for optimization of rotating equipment maintenance. (author)

  3. A recommended program of tritium monitoring research and development

    International Nuclear Information System (INIS)

    Nickerson, S.B.; Gerdingh, R.F.; Penfold, K.

    1982-10-01

    This report presents recommendations for programs of research and development in tritium monitoring instrumentation. These recommendations, if implemented, will offer Canadian industry the opportunity to develop marketable instruments. The major recommendations are to assist in the development and promotion of two Chalk River Nuclear Laboratories' monitors and an Ontario Hydro monitor, and to support research and development of a surface monitor

  4. Model for Agile Software Development Performance Monitoring

    OpenAIRE

    Žabkar, Nataša

    2013-01-01

    Agile methodologies have been in use for more than ten years and during this time they proved to be efficient, even though number of empirical research is scarce, especially regarding agile software development performance monitoring. The most popular agile framework Scrum is using only one measure of performance: the amount of work remaining for implementation of User Story from the Product Backlog or for implementation of Task from the Sprint Backlog. In time the need for additional me...

  5. Threshold responses of forest birds to landscape changes around exurban development.

    Directory of Open Access Journals (Sweden)

    Marcela Suarez-Rubio

    Full Text Available Low-density residential development (i.e., exurban development is often embedded within a matrix of protected areas and natural amenities, raising concern about its ecological consequences. Forest-dependent species are particularly susceptible to human settlement even at low housing densities typical of exurban areas. However, few studies have examined the response of forest birds to this increasingly common form of land conversion. The aim of this study was to assess whether, how, and at what scale forest birds respond to changes in habitat due to exurban growth. We evaluated changes in habitat composition (amount and configuration (arrangement for forest and forest-edge species around North America Breeding Bird Survey (BBS stops between 1986 and 2009. We used Threshold Indicator Taxa Analysis to detect change points in species occurrence at two spatial extents (400-m and 1-km radius buffer. Our results show that exurban development reduced forest cover and increased habitat fragmentation around BBS stops. Forest birds responded nonlinearly to most measures of habitat loss and fragmentation at both the local and landscape extents. However, the strength and even direction of the response changed with the extent for several of the metrics. The majority of forest birds' responses could be predicted by their habitat preferences indicating that management practices in exurban areas might target the maintenance of forested habitats, for example through easements or more focused management for birds within existing or new protected areas.

  6. Development of neutron personnel monitoring system based on CR-39 solid state nuclear track detector

    International Nuclear Information System (INIS)

    Massand, O.P.; Kundu, H.K.; Marathe, P.K.; Supe, S.J.

    1990-01-01

    Personnel neutron monitoring aims at providing a method to evaluate the magnitude of the detrimental effects on the personnel exposed to neutrons. Neutron monitoring is done for a small though growing number of personnel working with neutrons in a wide range of situations. Over the years, many solid state nuclear track detectors (SSNTD) have been tried for neutron personnel monitoring. CR-39 SSNTD is a proton sensitive polymer and offers a lot of promise for neutron personnel monitoring due to its high sensitivity and lower energy threshold for neutron detection. This report presents the mechanism of track formation in this polymer, the development of this neutron personnel monitoring system in our laboratory, its various characteristics and its promise as a routine personnel neutron monitor. (author). 1 tab., 7 figs

  7. Gender quotas for women in national politics: A comparative analysis across development thresholds.

    Science.gov (United States)

    Rosen, Jennifer

    2017-08-01

    Women's share of global lower or single house parliamentary seats has increased by over 70% over the course of the 21st century. Yet these increases have not been uniform across countries. Rather countries with low levels of socioeconomic development have outpaced developed democracies in terms of the gains made in the formal political representation of women. One reasonable explanation for this trend is the adoption in many poorer countries of national gender quota legislation, that is, affirmative action laws intended to compensate for sex discrimination in the electoral process. Yet, cross-national analyses examining quotas as an explanatory factor typically use a simple binary (yes/no) variable that either conflates the diverse intra-quota variations into a single variable or includes only one part of the many quota variations. By contrast, using an originally compiled dataset that includes 167 countries from 1992 to 2012, this paper employs measures of gender quota legislation that capture the complexity and considerable diversity of existing quota legislation. These measures allow us to identify the specific factors that have helped so many less developed countries rise to the top of international rankings in recent years. The findings indicate that the effect of each type of gender quota, as well as other explanatory variables, do not operate in the same way across all countries. Specifically, voluntary political party quotas are substantially more effective in developed countries, while reserved seat quotas are only significant in least developed countries. Electoral candidate quotas, on the other hand, can be significant across all countries, however only have a positive effect when they are accompanied by placement mandates that ensure women are placed in winnable positions, sanctions for non-compliance that are significant enough to force adherence, and a minimum mandated threshold of at least 30%. Copyright © 2017 Elsevier Inc. All rights reserved.

  8. Development of a portable radon progeny monitor

    International Nuclear Information System (INIS)

    Iimoto, Takeshi; Kosako, Toshiso; Sugiura, Nobuyuki

    2000-01-01

    Important nuclides in the radon family contributing to the effective dose are the members of the radon short-life progeny, 218 Po and 214 Po and direct measurement of these progenies is suitable for dosimetry. Survey of the radon progeny concentrations in a number of dwellings and offices is very difficult because we have no convenient instrument for the measurement. At present, radon dosimetry is carried out based on the concentration of the parent radon itself. Therefore, for accurate estimation of public or personal effective dose, it is necessary to develop a facile and portable radon progeny monitor. In this study, a portable radon progeny monitor (PRPM) was designed and developed to automatically estimate the individual progeny concentration in the natural environment. The properties of PRPM were investigated. The dimensions of the entire instrument were 65 x 145 x 170 mm and the total weight was 780 g. The portability of PRPM was much superior to the conventional instrument. The PRPM can operate automatically to estimate individual progeny concentration. All component materials of the monitor were selected based on the data of specified performance, cost performance and availability bon the market. The concentration of individual radon progeny was estimated by the build-up decay. It was concluded that PRPM is much suitable for outdoor study and personal dose estimation, as well as indoor measurement. In the field survey, especially in mines and caverns, PRPM is found as a valuable and convenient instrument. (M.N.)

  9. A new development in personnel monitoring

    International Nuclear Information System (INIS)

    Fletcher, R.J.

    1993-01-01

    For several years the UK National Radiological Protection Board (NRPB) has felt that the next major development in personal dosimetry should be an electronic dosemeter which would read out directly, to improve control of exposures and achieve a reduction in individual doses. This became a possibility when an arrangement of solid-state detectors and filters was developed at the NRPB which was suitable for the measurement of the individual photon dose equivalent. Since then, further development has taken place at the NRPB for the measurement of the individual dose equivalent superficial for β-radiation. The measurements are made in the quantities Hp(10) and Hs(0.07), as recommended by the ICRU for individual monitoring. Thus, the basic detector system for the development of an electronic dosemeter has been established. The device is now being manufactured and marketed. An electronic personal dosimetry service is described, together with the procedure which is being adopted to gain approval in the UK for monitoring the exposure of classified workers. The NRPB considers this to be the next logical development in personal dosimetry, and it has been shown that the device offers a number of advantages for this purpose. (Author)

  10. Development of a Personal Integrated Environmental Monitoring System

    Directory of Open Access Journals (Sweden)

    Man Sing Wong

    2014-11-01

    Full Text Available Environmental pollution in the urban areas of Hong Kong has become a serious public issue but most urban inhabitants have no means of judging their own living environment in terms of dangerous threshold and overall livability. Currently there exist many low-cost sensors such as ultra-violet, temperature and air quality sensors that provide reasonably accurate data quality. In this paper, the development and evaluation of Integrated Environmental Monitoring System (IEMS are illustrated. This system consists of three components: (i position determination and sensor data collection for real-time geospatial-based environmental monitoring; (ii on-site data communication and visualization with the aid of an Android-based application; and (iii data analysis on a web server. This system has shown to be working well during field tests in a bus journey and a construction site. It provides an effective service platform for collecting environmental data in near real-time, and raises the public awareness of environmental quality in micro-environments.

  11. Developing new age-specific prostate-specific antigen thresholds for testing for prostate cancer.

    Science.gov (United States)

    Gilbert, Rebecca; Tilling, Kate; Martin, Richard M; Lane, J Athene; Davis, Michael; Hamdy, Freddie C; Neal, David E; Donovan, Jenny L; Metcalfe, Chris

    2018-03-01

    To examine whether age-related reference ranges for "normal" prostate-specific antigen (PSA) change (determined in men without prostate cancer) can be used to identify men at high risk of having prostate cancer. Subjects were men aged 50-69 years with PSA age-related PSA change were used to calculate an age-specific PSA threshold. We compared the ability of our age-specific PSA threshold to discriminate between high- and no/low-risk prostate cancer with that of two existing thresholds: (i) threshold of PSA = 3 ng/ml for all ages; (ii) National Institute of Clinical Excellence (NICE) guidelines dependent on age-group thresholds (age 50-59: PSA = 3 ng/mL; age 60-70: PSA = 4 ng/mL; age ≥ 70: PSA = 5 ng/mL). We included 823 men with high-risk prostate cancer and 80,721 men with no/low-risk prostate cancer. A threshold of PSA = 3 ng/ml for all ages identified more high-risk prostate cancers, recommending biopsy in 9.8% of men, of which 10.3% (n = 823) had high-risk prostate cancer. Using the NICE guidelines as the threshold for biopsy, 6.9% men were recommended for biopsy, of which 11.9% (n = 668) had high-risk prostate cancer. Using the new age-specific threshold for biopsy, 2.3% men were recommended for biopsy, of which 15.2% (n = 290) had high-risk prostate cancer. The age-specific threshold identified fewer high-risk prostate cancers, but fewer men received unnecessary biopsy. There is no benefit to using reference ranges for "normal" PSA that change with age nor the age-specific thresholds suggested by the NICE guidelines. While the age-varying thresholds are more discriminatory, too many high-risk cancers are missed.

  12. Development of new structural health monitoring techniques

    Science.gov (United States)

    Fekrmandi, Hadi

    During the past two decades, many researchers have developed methods for the detection of structural defects at the early stages to operate the aerospace vehicles safely and to reduce the operating costs. The Surface Response to Excitation (SuRE) method is one of these approaches developed at FIU to reduce the cost and size of the equipment. The SuRE method excites the surface at a series of frequencies and monitors the propagation characteristics of the generated waves. The amplitude of the waves reaching to any point on the surface varies with frequency; however, it remains consistent as long as the integrity and strain distribution on the part is consistent. These spectral characteristics change when cracks develop or the strain distribution changes. The SHM methods may be used for many applications, from the detection of loose screws to the monitoring of manufacturing operations. A scanning laser vibrometer was used in this study to investigate the characteristics of the spectral changes at different points on the parts. The study started with detecting a load on a plate and estimating its location. The modifications on the part with manufacturing operations were detected and the Part-Based Manufacturing Process Performance Monitoring (PbPPM) method was developed. Hardware was prepared to demonstrate the feasibility of the proposed methods in real time. Using low-cost piezoelectric elements and the non-contact scanning laser vibrometer successfully, the data was collected for the SuRE and PbPPM methods. Locational force, loose bolts and material loss could be easily detected by comparing the spectral characteristics of the arriving waves. On-line methods used fast computational methods for estimating the spectrum and detecting the changing operational conditions from sum of the squares of the variations. Neural networks classified the spectrums when the desktop -- DSP combination was used. The results demonstrated the feasibility of the SuRE and PbPPM methods.

  13. Development of the Guardian environmental monitoring system

    International Nuclear Information System (INIS)

    Gould, J.L.; Thompson, I.M.G.

    1982-01-01

    The report describes the Guardian Environmental Monitoring System, developed jointly by the CEGB's Berkeley Nuclear Laboratories (BNL) and GEC Energy Systems Limited (ESL). The basic battery operated instrument was developed by BNL for the measurement of any nuclear facility contribution to the overall environmental dose. It uses an energy compensated Geiger counter to provide a continuous record for over a month of dose rates from 1 μR h -1 (10nGy h -1 ). Results are presented of initial development trials and of an intercomparison with the USA Environmental Measurement Laboratory. The Guardian system, however, was developed, not only to meet the CEGB requirements for a recording monitor, but also to meet the requirements of US Regulatory Commission Guide RG 1.97, introduced as a result of the accident at Three Mile Island. This system, by using two energy compensated Geiger counters has a range from 1μRh -1 up to 10Rh -1 (approximately equal to 100mGyh -1 ), and the associated electronics provides automatic range changing, including fast response to ramp exposure rate changes, alarm and test facilities and telemetry by line or radio to a central station. (author)

  14. Threshold dose to developing central nerve system of rats and mice from prenatal exposure to tritiated water

    International Nuclear Information System (INIS)

    Zhou Xiangyan; Wang Bing; Gao Weimin; Lu Huimin

    1999-01-01

    Objective: To study the threshold dose to the developing central nerve system of rats and mice from prenatal exposure to tritiated water. methods: Pregnant adult C 57 BL/6J strain mice and Wistar strain rats were irradiated with beta-rays from HTO by a single intraperitoneal injection on the 12.5 th and 13 th days of gestation. The activities of HTO were 24.09, 48.18 and 144.54 ( x 10 4 Bq/g bw), respectively. Fifty-six parameters including postnatal growth, neutro-behavior, pathology of brain, neuropeptide contents, changes of hippocampal neurons, Ca 2+ conductance of hippocampal neurons etc were used to test the teratogenic threshold dose the lowest dose was different from that of the control). Results: Of the observed 56 parameters of rats and mice 80.4% indicated that the threshold doses for prenatal HTO exposure ranged from 0.030 Gy to 0.092 Gy, and the other 19.6% showed the threshold doses from 0.093 to 0.300 Gy. Conclusions: There exists threshold dose from the low level tritiated water irradiation of the developing central nerve system

  15. Monitoring the Hearing Handicap and the Recognition Threshold of Sentences of a Patient with Unilateral Auditory Neuropathy Spectrum Disorder with Use of a Hearing Aid.

    Science.gov (United States)

    Lima, Aline Patrícia; Mantello, Erika Barioni; Anastasio, Adriana Ribeiro Tavares

    2016-04-01

    Introduction Treatment for auditory neuropathy spectrum disorder (ANSD) is not yet well established, including the use of hearing aids (HAs). Not all patients diagnosed with ASND have access to HAs, and in some cases HAs are even contraindicated. Objective To monitor the hearing handicap and the recognition threshold of sentences in silence and in noise in a patient with ASND using an HA. Resumed Report A 47-year-old woman reported moderate sensorineural hearing loss in the right ear and high-frequency loss of 4 kHz in the left ear, with bilateral otoacoustic emissions. Auditory brainstem response suggested changes in the functioning of the auditory pathway (up to the inferior colliculus) on the right. An HA was indicated on the right. The patient was tested within a 3-month period before the HA fitting with respect to recognition threshold of sentences in quiet and in noise and for handicap determination. After HA use, she showed a 2.1-dB improvement in the recognition threshold of sentences in silence, a 6.0-dB improvement for recognition threshold of sentences in noise, and a rapid improvement of the signal-to-noise ratio from +3.66 to -2.4 dB when compared with the same tests before the fitting of the HA. Conclusion There was a reduction of the auditory handicap, although speech perception continued to be severely limited. There was a significant improvement of the recognition threshold of sentences in silence and in noise and of the signal-to-noise ratio after 3 months of HA use.

  16. Theory of threshold phenomena

    International Nuclear Information System (INIS)

    Hategan, Cornel

    2002-01-01

    Theory of Threshold Phenomena in Quantum Scattering is developed in terms of Reduced Scattering Matrix. Relationships of different types of threshold anomalies both to nuclear reaction mechanisms and to nuclear reaction models are established. Magnitude of threshold effect is related to spectroscopic factor of zero-energy neutron state. The Theory of Threshold Phenomena, based on Reduced Scattering Matrix, does establish relationships between different types of threshold effects and nuclear reaction mechanisms: the cusp and non-resonant potential scattering, s-wave threshold anomaly and compound nucleus resonant scattering, p-wave anomaly and quasi-resonant scattering. A threshold anomaly related to resonant or quasi resonant scattering is enhanced provided the neutron threshold state has large spectroscopic amplitude. The Theory contains, as limit cases, Cusp Theories and also results of different nuclear reactions models as Charge Exchange, Weak Coupling, Bohr and Hauser-Feshbach models. (author)

  17. Monitoring Student Activity in Collaborative Software Development

    DEFF Research Database (Denmark)

    Dietsch, Daniel; Podelski, Andreas; Nam, Jaechang

    2013-01-01

    year of studies formed 20 groups and worked collaboratively to develop video games. Throughout the lab, students have to use a variety of tools for managing and developing their projects, such as software version control, static analysis tools, wikis, mailing lists, etc. The students are also supported...... by weekly meetings with teaching assistants and instructors regarding group progress, code quality, and management issues. Through these meetings and their interactions with the software tools, students leave a detailed trace of data related to their individual engagement and their collaboration behavior...... in their groups. The paper provides discussion on the different source of data that can be monitored, and present preliminary results on how these data can be used to analyze students' activity....

  18. Development of a flow history correction factor for sediment entrainment thresholds

    Science.gov (United States)

    Hassan, K. I.; Haynes, H.

    2012-12-01

    A plethora of sediment transport equations exist with which to predict sediment load and morphology of river systems; however, these are often sensitive to the entrainment threshold parameter employed. Many practising river engineers still prefer use of the Shields parameter's critical threshold value ~0.06 (Shields, 1936) as generally applicable for uniform grain size. Yet, recent research suggest that this is value may be highly sensitive to the flow history that the bed is exposed to prior to entrainment (e.g. Paphitis and Collins, 2005; Monteith and Pender, 2005; Haynes and Pender, 2007; Ockelford et al., 2010). Laboratory experiments were conducted for planar sand beds of uniform grain size (D50 = 1.7mm) using a 5m x 0.3 m recirculation flume set to a 1 in 300 gradient. Entrainment threshold was defined using Yalin's visual method (Yalin, 1972) and associated shear stresses estimated using a depth-slope product approach. Beds were subjected to flow histories of 0, 60, 120 and 240 minutes of sub-threshold flow (50% critical shear stress); these were then subjected to incremental increases of applied shear stresses to establish the revised entrainment threshold shear stress. Compared with the Shields diagram and the modified diagram by Parker et al. (2003) results indicate that water-working increases the Shield parameter by 10-60%. Given that data clearly indicate a positive relationship between flow history duration and parameter magnitude, detailed comparison with wider experimental flow history research has been undertaken to propose a novel mathematical correction factor for entrainment threshold. This yields important implications for improved modelling practice for bedload transport in river systems.

  19. Beam Monitor Development for Fermilab E1039

    Science.gov (United States)

    Towell, Cecily; SeaQuest Collaboration

    2017-09-01

    Experiment 1039 at Fermi National Accelerator Laboratory is the approved follow-up experiment to SeaQuest/E906 that had the goal of determining the quark and antiquark distribution within nucleons. The SeaQuest detector was optimized to detect Drell-Yan muon pairs produced by quark-antiquark annihilations that occur when the 120 GeV proton beam impacts a series of targets. E1039 will utilize the same beamline and hardware as SeaQuest, but replaces the unpolarized targets with polarized deuterium and hydrogen targets in order to study the spin contribution of the sea quarks to the collective spin of a nucleon. This measurement is extremely sensitive to asymmetries in the beam profile. Therefore, a new beam luminosity detector is desired to reduce error in the experiment's primary measurements by providing details of the beam distribution. To test prototypes of this detector, a cosmic test stand was designed and is being built at Abilene Christian University. This stand uses the coincidence of double ended hodoscopes to trigger on the prototype detector. Such a test stand allows us to determine the rates and measure the efficiency of the beam monitor prototype. The development and testing of the beam monitor will be presented. Supported by U.S. D.O.E. Medium Energy Nuclear Physics under Grant DE-FG02-03ER41243.

  20. Development of post-fire crown damage mortality thresholds in ponderosa pine

    Science.gov (United States)

    James F. Fowler; Carolyn Hull Sieg; Joel McMillin; Kurt K. Allen; Jose F. Negron; Linda L. Wadleigh; John A. Anhold; Ken E. Gibson

    2010-01-01

    Previous research has shown that crown scorch volume and crown consumption volume are the major predictors of post-fire mortality in ponderosa pine. In this study, we use piecewise logistic regression models of crown scorch data from 6633 trees in five wildfires from the Intermountain West to locate a mortality threshold at 88% scorch by volume for trees with no crown...

  1. The development of an economic threshold for Nasonovia ribisnigri (Hemiptera: Aphididae) on lettuce in central Spain.

    Science.gov (United States)

    Morales, Ignacio; Diaz, Beatriz María; Hermoso de Mendoza, Alfonso; Nebreda, Miguel; Fereres, Alberto

    2013-04-01

    This study reports economic thresholds for the lettuce aphid Nasonovia ribisnigri (Mosley), based exclusively on cosmetic damage, that is, presence or absence of aphids at harvest time. Field trials were conducted in La Poveda Experimental Farm, Madrid (Spain) during autumn (2004 and 2005) and spring (2005 and 2006). Plants were arranged in plots and just before the formation of lettuce hearts they were infested with different densities of N. ribisnigri. Two days later, half of each plot was treated with tau-fluvalinate (Klartan24AF) and the other half remained as an untreated control. Economic thresholds were obtained from nonlinear regressions calculated between the percentage of commercial plants at the end of the crop cycle for both, treated and untreated semiplots, and the different initial densities of N. ribisnigri per plant. Two criteria were used to consider a commercial lettuce plant: a conservative estimate (0 aphids/plant) and a lax one (aphids/plant). Thus, an economic threshold was established for each season and criterium. The economic thresholds that were obtained with the most and least conservative criteria were in spring 0.06 and 0.12 aphids per plant, and in autumn 0.07 and 0.13 aphids per plant, respectively. These results show that to avoid cosmetic damage, insecticide sprays are required when a very low aphid density is detected in lettuce seedlings soon after transplant.

  2. The development of NSSS digital integrity monitoring system

    International Nuclear Information System (INIS)

    Ham, Chang Shik; Kim, Jung Soo; Jung, Chul Hwan; Hwang, In Koo; Kim, Tak Hwane; Kim, Tae Hwane; Park, Jin Ho; Kyung, Sung Yoon; Hyeon, Ryu Kye; Seong, Joo Hyun; Kim, Georn Myung; Eun, Sung Hun; Kwack, Jin Gu; Park, Joon Hee

    1999-11-01

    The primary function of loose part monitoring system (LPMS) is to detect the occurrence of any loose part in the primary coolant system caused by being parted or loosened from the mechanical structure during normal operation and refueling times. The existing LPMSs generates an alarm when the detected signal from the accelerometer sensors attached to the surface of the primary pressure boundary was bigger than the alarm threshold value. The internal vibration monitoring system (IVMS) senses a change of vibration of the reactor vessel internal structure using the ex-core neutron signals. The vibrations of internal mechanical structure are caused by the high velocity flow of the pressurized primary coolant. If the flow-induced vibration forces to loosen the internal components supporting the fuel assembly, the safety of nuclear reactor will be affected. The IVMS provides the information of abnormality in the vibration pattern and amplitude for plant operators to take proper actions against the abnormal condition for nuclear power plants (NPPs). An advanced LPMS should be capable to identify the physical characteristics of the potential loose part from the detected signal. Those improved diagnostic function will be the capabilities to analyze the detected signal and to estimate the expected impact position and mass automatically. The technologies and methods of estimation for impact mass and position as well as a new modeling method of reactor internal vibration modes were developed and provided to Woojin Co. from Korea Energy Research Institute (KAERI). Based on the transferred technologies, Woojin Co. has designed the hardware system of LPMS and IVMS. Some of the hardware components were integrated and the hardware-oriented software modules were also developed and designed. (author)

  3. Development of the real time monitor system

    International Nuclear Information System (INIS)

    Kato, Katsumi; Watanabe, Tadashi; Kaburaki, Hideo.

    1996-10-01

    Large-scale simulation technique is studied at the Center for Promotion of Computational Science and Engineering (CCSE) for the computational science research in nuclear fields. Visualization and animation processing technique are studied and developed for efficient understanding of simulation results. The real time monitor system, in which on-going simulation results are transferred from a supercomputer or workstation to a graphic workstation and are visualized and recorded, is described in this report. This system is composed of the graphic workstation and the video equipment connected to the network. The control shell programs are the job-execution shell for simulations on supercomputers, the file-transfer shell for output files for visualization, and the shell for starting visualization tools. Special image processing technique and hardware are not necessary in this system and the standard visualization tool AVS and the UNIX commands are used, so that this system can be implemented and applied in various computer environments. (author)

  4. Development of geoportal for landslide monitoring

    Directory of Open Access Journals (Sweden)

    Sladić Dubravka

    2012-01-01

    Full Text Available The paper presents the implementation of geoportal for landslide monitoring which which includes two subsystems: a system for acquisition, storage and distribution of data on landslides and real time alert system. System for acquisition, storage and distribution of data on landslides include raster and vector spatial data on landslides affected areas, as well as metadata. Alert system in real time is associated with a sensor for detecting displacement, which performs constant measurements and signals in case of exceeding the reference value. The system was developed in accordance with the standards in the field of GIS: ISO 19100 series of standards and OpenGIS Consortium and is based on service-oriented architecture and principles of spatial data infrastructures. [Projekat Ministarstva nauke Republike Srbije, br. TR37017: Modeliranje stanja i strukture padinskih procesa primenom GNSS i tehnologija skeniranja laserom i georadarom

  5. Design and Development of Patient Monitoring System

    Science.gov (United States)

    Hazwanie Azizulkarim, Azra; Jamil, Muhammad Mahadi Abdul; Ambar, Radzi

    2017-08-01

    Patient monitoring system allows continuous monitoring of patient vital signs, support decision making among medical personnel and help enhance patient care. This system can consist of devices that measure, display and record human’s vital signs, including body temperature, heart rate, blood pressure and other health-related criteria. This paper proposes a system to monitor the patient’s conditions by monitoring the body temperature and pulse rate. The system consists of a pulse rate monitoring software and a wearable device that can measure a subject’s temperature and pulse rate only by using a fingertip. The device is able to record the measurement data and interface to PC via Arduino microcontroller. The recorded data can be viewed as a historical file or can be archived for further analysis. This work also describes the preliminary experimental results of the selected sensors to show the usefulness of the sensors for the proposed patient monitoring system.

  6. Development of a wave-induced forcing threshold for nearshore impact of Wave Energy Converter arrays

    Science.gov (United States)

    O'Dea, A.; Haller, M. C.; Ozkan-Haller, H. T.

    2016-02-01

    Wave-induced forcing is a function of spatial gradients in the wave radiation stresses and is the main driver of alongshore currents, rip currents, and nearshore sediment transport. The installation of nearshore Wave Energy Converter (WEC) arrays may cause significant changes in the surf zone radiation stresses and could therefore impact nearshore littoral processes. In the first part of this study, a new threshold for nearshore hydrodynamic impact due to the presence of WEC devices is established based on changes in the alongshore radiation stress gradients shoreward of WEC arrays. The threshold is defined based on the relationship between nearshore radiation stresses and alongshore currents as observed in field data. Next, we perform a parametric study of the nearshore impact of WEC arrays using the SWAN wave model. Trials are conducted on an idealized, alongshore-uniform beach with a range of WEC array configurations, locations, and incident wave conditions, and conditions that generate radiation stress gradients above the impact threshold are identified. Finally, the same methodology is applied to two wave energy test sites off the coast of Newport, OR with more complicated bathymetries. Although the trends at the field sites are similar to those seen in the parametric study, the location and extent of the changes in the alongshore radiation stress gradients appear to be heavily influenced by the local bathymetry.

  7. Developing hydrological monitoring networks with Arduino

    Science.gov (United States)

    Buytaert, Wouter; Vega, Andres; Villacis, Marcos; Moulds, Simon

    2015-04-01

    The open source hardware platform Arduino is very cost-effective and versatile for the development of sensor networks. Here we report on experiments on the use of Arduino-related technologies to develop and implement hydrological monitoring networks. Arduino Uno boards were coupled to a variety of commercially available hydrological sensors and programmed for automatic data collection. Tested sensors include water level, temperature, humidity, radiation, and precipitation. Our experiments show that most of the tested analogue sensors are quite straightforward to couple to Arduino based data loggers, especially if the electronic characteristics of the sensor are available. However, some sensors have internal digital interfaces, which are more challenging to connect. Lastly, tipping bucket rain gauges prove the most challenging because of the very specific methodology, i.e. registration of bucket tips instead of measurements at regular intervals. The typically low data generation rate of hydrological instruments is very compatible with available technologies for wireless data transmission. Mesh networks such as Xbee prove very convenient and robust for dispersed networks, while wifi is also an option for shorter distances and particular topographies. Lastly, the GSM shield of the Arduino can be used to transfer data to centralized databases. In regions where no mobile internet (i.e. 3G) connection is available, data transmission via text messages may be an option, depending on the bandwidth requirements.

  8. Development of a spherical neutron rem monitor

    International Nuclear Information System (INIS)

    Panchal, C.G.; Madhavi, V.; Bansode, P.Y.; Jakati, R.K.; Ghodgaonkar, M.D.; Desai, S.S.; Shaikh, A.M.; Sathian, V.

    2007-01-01

    A new neutron rem monitor based on spherical LINUS with the state of art electronic circuits has been designed in Electronics Division. This prototype instrument encompasses a spherical double polythene moderator to improve an isotropic response and a lead layer to extend its energy response compared to the conventional neutron rem monitors. A systematic testing and calibration of the energy and directional response of the prototype monitor have been carried out. Although the monitor is expected to perform satisfactorily upto an energy ∼ 55 MeV, at present its response has been tested upto 5 MeV. (author)

  9. Optical techniques for perfusion monitoring of the gastric tube after esophagectomy: a review of technologies and thresholds.

    Science.gov (United States)

    Jansen, S M; de Bruin, D M; van Berge Henegouwen, M I; Strackee, S D; Veelo, D P; van Leeuwen, T G; Gisbertz, S S

    2018-04-26

    Anastomotic leakage is one of the most severe complications after esophageal resection with gastric tube reconstruction. Impaired perfusion of the gastric fundus is seen as the main contributing factor for this complication. Optical modalities show potential in recognizing compromised perfusion in real time, when ischemia is still reversible. This review provides an overview of optical techniques with the aim to evaluate the (1) quantitative measurement of change in perfusion in gastric tube reconstruction and (2) to test which parameters are the most predictive for anastomotic leakage.A Pubmed, MEDLINE, and Embase search was performed and articles on laser Doppler flowmetry (LDF), near-infrared spectroscopy (NIRS), laser speckle contrast imaging (LSCI), fluorescence imaging (FI), sidestream darkfield microscopy (SDF), and optical coherence tomography (OCT) regarding blood flow in gastric tube surgery were reviewed. Two independent reviewers critically appraised articles and extracted the data: Primary outcome was quantitative measure of perfusion change; secondary outcome was successful prediction of necrosis or anastomotic leakage by measured perfusion parameters.Thirty-three articles (including 973 patients and 73 animals) were selected for data extraction, quality assessment, and risk of bias (QUADAS-2). LDF, NIRS, LSCI, and FI were investigated in gastric tube surgery; all had a medium level of evidence. IDEAL stage ranges from 1 to 3. Most articles were found on LDF (n = 12), which is able to measure perfusion in arbitrary perfusion units with a significant lower amount in tissue with necrosis development and on FI (n = 12). With FI blood flow routes could be observed and flow was qualitative evaluated in rapid, slow, or low flow. NIRS uses mucosal oxygen saturation and hemoglobin concentration as perfusion parameters. With LSCI, a decrease of perfusion units is observed toward the gastric fundus intraoperatively. The perfusion units (LDF, LSCI), although

  10. Monitoring in educational development projects : the development of a monitoring system

    NARCIS (Netherlands)

    Plomp, T.; Huijsman, Hari; Kluyfhout, Eric

    1992-01-01

    Monitoring in education is usually focused on the monitoring of educational systems at different levels. Monitoring of educational projects receives only recently explicit attention. The paper discusses first the concepts of educational monitoring and evaluation. After that, the experience with

  11. Development of radioactive seawater monitors, 1

    International Nuclear Information System (INIS)

    Fukushima, Masanori

    1989-01-01

    Applicability of some adsorptive materials to monitoring of radioactive seawater is generalized. Studied techniques that allow utilization of adsorptive materials in monitoring radioactive seawater are the substitute methods using sampled seawater or indicator plants such as gulfweed and the method using adsorptive materials for continuous monitoring of underwater radioactivity, the method using them for field measurement of under water radioactivity from a boat, and the method using an adsorptive material moored underwater for integration monitoring of underwater radioactivity. Selected adsorptive materials that were judged suitable for monitoring radioactive seawater is the one composed of some kind of adsorptive compound (manganese dioxide or ferrocyan cobalt potassium) fixed to crylic cellulose. This adsorptive material permits selective scavenging radioactive Cs, Mn, Co, Zn, Ce, Fe, Ru, Ra Th, Pu and Am from seawater. (aurhor)

  12. Instrumentation development for real time brainwave monitoring.

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Lawrence Frederick; Clough, Benjamin W.

    2005-12-01

    The human brain functions through a chemically-induced biological process which operates in a manner similar to electrical systems. The signal resulting from this biochemical process can actually be monitored and read using tools and having patterns similar to those found in electrical and electronics engineering. The primary signature of this electrical activity is the ''brain wave'', which looks remarkably similar to the output of many electrical systems. Likewise, the device currently used in medical arenas to read brain electrical activity is the electroencephalogram (EEG) which is synonymous with a multi-channel oscilloscope reading. Brain wave readings and recordings for medical purposes are traditionally taken in clinical settings such as hospitals, laboratories or diagnostic clinics. The signal is captured via externally applied scalp electrodes using semi-viscous gel to reduce impedance. The signal will be in the 10 to 100 microvolt range. In other instances, where surgeons are attempting to isolate particular types of minute brain signals, the electrodes may actually be temporarily implanted in the brain during a preliminary procedure. The current configurations of equipment required for EEGs involve large recording instruments, many electrodes, wires, and large amounts of hard disk space devoted to storing large files of brain wave data which are then eventually analyzed for patterns of concern. Advances in sensors, signal processing, data storage and microelectronics over the last decade would seem to have paved the way for the realization of devices capable of ''real time'' external monitoring, and possible assessment, of brain activity. A myriad of applications for such a capability are likewise presenting themselves, including the ability to assess brain functioning, level of functioning and malfunctioning. Our plan is to develop the sensors, signal processing, and portable instrumentation package which could

  13. Threshold self-powered gamma detector for use as a monitor of power in a nuclear reactor

    International Nuclear Information System (INIS)

    LeVert, F.E.; Cox, S.A.

    1978-01-01

    A self-powered gamma monitor for placement near the core of a nuclear reactor comprises a lead prism surrounded by a coaxial thin nickel sheet, the combination forming a collector. A coaxial polyethylene electron barrier encloses the collector and is separated from the nickel sheet by a vacuum region. The electron barrier is enclosed by a coaxial stainless steel emitter which, in turn, is enclosed within a lead casing. When the detector is placed in a flux of gamma rays, a measure of the current flow in an external circuit between emitter and collector provides a measure of the power level of the reactor

  14. New developments in continuous monitoring of airborne activity

    International Nuclear Information System (INIS)

    Swinth, K.L.

    1987-01-01

    Air monitors that operate continuously are used in nuclear facilities to detect unexpected malfunctions in controls that limit levels of airborne radioactivity in occupied area. Monitoring for concentrations of alpha-emitting transuranics is the most difficult task in air monitoring. Workplace monitoring for alpha emitters requires a detection level ∼2% that of nonalpha-emitting radionuclides with a half-life >2 h. Typically, air monitoring is accomplished by passing a volume of the monitored air through a filter to collect the particulates. The filter is located near a detector that monitors the radioactivity of the collected particles and sends an alarm when the activity exceeds established limits. Alpha activity from daughters of thoron and radon, present in all air in variable amounts, hampers monitoring for transuranics. This presentation describes developments that have improved the accuracy and sensitivity for the monitoring of airborne concentration of transuranics

  15. Development of remote operated floor contamination monitor

    International Nuclear Information System (INIS)

    Sreekumar, K.; Gangamohan, M.; Kannan, R.K.; Rajan, S.

    2005-01-01

    Contamination check of floors and walkways in and around Reactor building areas forms an integral part of Radiation Protection Program in Power Stations. Though random swipe check method is adopted for the detection of loose contamination, this method has the disadvantage of leaving the fixed contamination and hotspots undetected. Hence, scanning the area with a sensitive detector, held close to the surface provides positive means for the detection of contamination. Checking large areas and walkways by holding the detector close to the surface involves physical work. Also, areas which are unapproachable due to congestion of equipment, may go uncovered by contamination monitoring in order to eliminate the physical strain involved in such contamination monitoring and to cover unapproachable areas, a small size prototype device that can be operated remotely was fabricated. This device detects contamination instantaneously and accurately. This paper describes design and fabrication of the device used for floor contamination monitoring. (author)

  16. Current status of technology development on remote monitoring system

    International Nuclear Information System (INIS)

    Yoon, Wan Ki; Lee, Y. K.; Lee, Y. D.; Na, W. W.

    1997-03-01

    IAEA is planning to perform the remote monitoring system in nuclear facility in order to reinforce the economical and efficient inspection. National lab. in U.S. is developing the corresponding core technology and field trial will be done to test the remote monitoring system by considering the case that it replace the current safeguards system. U.S. setup the International Remote Monitoring Project to develop the technology. IAEA makes up remote monitoring team and setup the detail facility to apply remote monitoring system. Therefore, early participation in remote monitoring technology development will make contribution in international remote monitoring system and increase the transparency and confidence in domestic nuclear activities. (author). 12 refs., 20 figs

  17. Development of CDMS-II Surface Event Rejection Techniques and Their Extensions to Lower Energy Thresholds

    Energy Technology Data Exchange (ETDEWEB)

    Hofer, Thomas James [Univ. of Minnesota, Minneapolis, MN (United States)

    2014-12-01

    The CDMS-II phase of the Cryogenic Dark Matter Search, a dark matter direct-detection experiment, was operated at the Soudan Underground Laboratory from 2003 to 2008. The full payload consisted of 30 ZIP detectors, totaling approximately 1.1 kg of Si and 4.8 kg of Ge, operated at temperatures of 50 mK. The ZIP detectors read out both ionization and phonon pulses from scatters within the crystals; channel segmentation and analysis of pulse timing parameters allowed e ective ducialization of the crystal volumes and background rejection su cient to set world-leading limits at the times of their publications. A full re-analysis of the CDMS-II data was motivated by an improvement in the event reconstruction algorithms which improved the resolution of ionization energy and timing information. The Ge data were re-analyzed using three distinct background-rejection techniques; the Si data from runs 125 - 128 were analyzed for the rst time using the most successful of the techniques from the Ge re-analysis. The results of these analyses prompted a novel \\mid-threshold" analysis, wherein energy thresholds were lowered but background rejection using phonon timing information was still maintained. This technique proved to have signi cant discrimination power, maintaining adequate signal acceptance and minimizing background leakage. The primary background for CDMS-II analyses comes from surface events, whose poor ionization collection make them di cult to distinguish from true nuclear recoil events. The novel detector technology of SuperCDMS, the successor to CDMS-II, uses interleaved electrodes to achieve full ionization collection for events occurring at the top and bottom detector surfaces. This, along with dual-sided ionization and phonon instrumentation, allows for excellent ducialization and relegates the surface-event rejection techniques of CDMS-II to a secondary level of background discrimination. Current and future SuperCDMS results hold great promise for mid- to low

  18. Development of regulatory technical rationale for risk monitoring program

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Chang Hyun; Kim, Ju Youl; Kim, Yoon Ik; Yang, Hui Chang; Lee, Yong Suk; Ahn, Kwang Won; Kim, Se Hyung [Seoul National Univ., Seoul (Korea, Republic of)

    2002-03-15

    In Korea, the risk monitoring program will be developed and applied to each plants till 2003 by the severe accident management plan to enhance the safety functions of the nuclear power plants. Through this plan, the risk monitoring for the full power and low power and shutdown operation will be performed. Therefore the development of consistent risk monitoring system and overall regulatory guides for the risk monitoring program are necessary. The objective of this study is the development of regulatory technical rationales for the nuclear power plant risk monitoring program and the derivation of the requirements need for the development of risk monitoring system. Through this the improvement of regulatory effectiveness to assure the safe operation of nuclear power plant, is expected.

  19. Decision threshold associated with multiple measurements. Application to the synthesis of the environment monitoring results; Seuil de decision associe a des mesures multiples. Application a la synthese des resultats de surveillance de l'environnement

    Energy Technology Data Exchange (ETDEWEB)

    Vivier, A. [CEA, Institut national des sciences et techniques nucleaires, Centre de Saclay, 91191 Gif-sur-Yvette Cedex (France); Manificat, G. [IRSN, Direction de l' environnement et de l' intervention, Service d' etude et de surveillance de la radioactivite dans l' environnement, BP 40035, 78116 Le Vesinet Cedex (France); Picolo, J.L.; Fleury, S. [IRSN, Direction de l' environnement et de l' intervention, Service de traitement des echantillons et de metrologie pour l' environnement, BP 40035, 78116 Le Vesinet Cedex (France); Mokili, M. [Laboratoire SUBATECH - UMR 6457, ecole des Mines de Nantes, IN2P3/CNRS, Universite de Nantes, 4 rue Alfred Kastler, La Chantrerie, BP 20722, 44307 Nantes Cedex 03 (France); Guo, X. [ORTEC-AMETEK Inc, 801 S. Illinois Ave., Oak Ridge, TN 37830 (United States)

    2012-01-15

    When the sample activity is measured for various reasons several times, then with each measurement can be associated an individual decision threshold and limit of detection. Each measurement can be analyzed through its own decision threshold. The whole measurements can sometimes present contradictory results, some measurements being lower than the decision threshold and other higher. The problem then arises to build a decision threshold and a detection limit taking into account all the individual results, and to decide if the radioactivity is finally detected or not. It is interesting to note that it is possible sometimes that the decision threshold taking account all results makes it possible to decide that the radioactivity is present whereas the totality of the individual results are negative in terms of individual decision threshold. The purpose of this article is to show how these thresholds and these coherent limits cumulated can be determined in way according to the experimental conditions. In a general way a rigorous method of cumulating makes it possible to systematically decrease the decision threshold and limit of detection in terms of activity. This approach has interesting applications in gamma spectrometry with multi-emitters, discharge or periodical environmental measurements. On the basis of measurements realized by the IRSN within the framework of the national monitoring of the environment, we will see the potential impact of these methods on the final assessments. (authors)

  20. Wakefield monitor development for CLIC accelerating structure

    CERN Document Server

    Peauger, F; Girardot, P; Andersson, A; Riddone, G; Samoshkin, A; Solodko, A; Zennaro, R; Ruber, R

    2010-01-01

    Abstract To achieve high luminosity in CLIC, the accelerating structures must be aligned to an accuracy of 5 μm with respect to the beam trajectory. Position detectors called Wakefield Monitors (WFM) are integrated to the structure for a beam based alignment. This paper describes the requirements of such monitors. Detailed RF design and electromagnetic simulations of the WFM itself are presented. In particular, time domain computations are performed and an evaluation of the resolution is done for two higher order modes at 18 and 24 GHz. The mechanical design of a prototype accelerating structure with WFM is also presented as well as the fabrication status of three complete structures. The objective is to implement two of them in CTF3 at CERN for a feasibility demonstration with beam and high power rf.

  1. Development of picosecond pulsed electron beam monitor. 2

    International Nuclear Information System (INIS)

    Hosono, Y.; Nakazawa, M.; Ueda, T.

    1994-01-01

    A picosecond pulsed electron beam monitor for a 35 MeV linear accelerator has been developed. The monitor consists of an electric SMA connector and aluminium pipe(inner diameter of 50mm). The following characteristics of this monitor were obtained, (a) the rise time is less than 17.5 ps (b) linearity of the monitor output voltage is proportional to the peak current of beam. It is shown that this monitor can be successfully used for bunch measurements of picosecond pulsed electron beam of 35 MeV linac. (author)

  2. Development of the Arctic radionuclide monitoring station

    Science.gov (United States)

    King, S. E.; Aakenes, U. R.; McCoy, K.; Phillips, G. W.

    1997-06-01

    The world has learned about the dumping of nuclear reactors and other waste into the Arctic seas by the former Soviet Union. Most of the information on the present levels of radioactivity in the region has been obtained by oceanographic expeditions conducted during the brief Arctic summers. Year-round monitoring of the movement of radioactivity during dynamic seasonal and episodic changes is hampered by the difficulties caused by sea ice, logistics and communication constraints associated with deployment and maintenance of monitoring equipment in this remote region. The authors have designed an autonomous station to measure the benthic gamma-ray emitting radioactivity for periods of at least one year. The station is capable of detecting a 30 Bq/m/sup 3/ increase in the /sup 137/Cs activity in a 24 hour period. After a year-long deployment, the station releases its anchor and rises to the surface to transmit the accumulated spectra and oceanographic data via an Argos satellite link. The design and performance characteristics of the prototype station are discussed.

  3. Monitoring soil for sustainable development and land degradation neutrality.

    Science.gov (United States)

    Tóth, Gergely; Hermann, Tamás; da Silva, Manuela Ravina; Montanarella, Luca

    2018-01-04

    The adoption of the 17 sustainable development goals (SDGs) listed in the 2030 Agenda for Sustainable Development by the United Nations urged the scientific community to generate information for planning and monitoring socioeconomic development and the underlying environmental compartments. SDGs 2, 3, 6, 11, 13, 14, and 15 have targets which commend direct consideration of soil resources. There are five groups of SDGs and assigned SDG indicators where soil plays a central role. Frameworks of soil-related sustainable development goals and related indicators which can be monitored in current monitoring schemes are proposed.

  4. A microalbuminuria threshold to predict the risk for the development of diabetic retinopathy in type 2 diabetes mellitus patients.

    Directory of Open Access Journals (Sweden)

    Haibing Chen

    Full Text Available OBJECTIVE: To test the hypothesis that a microalbuminuria (MA threshold can help predict the risk for the development of diabetic retinopathy (DR in type 2 diabetes mellitus (T2DM_ patients. DESIGN: We conducted a cross-sectional study of 4739 subjects with T2DM and a prospective study of 297 subjects with T2DM in China respectively. METHODS: Clinical and laboratory data were collected and biologic risk factors associated with any DR were analysed. RESULTS: In the cross-sectional study, we found that MA was an independent risk factor for DR development; further, when the patients were divided into MA deciles, odds ratio (ORs of DR for the patients in the sixth MA decile (10.7 mg/24 h was 1.579-fold (1.161-2.147 compared to that for patients in the first MA decile. Furthermore, the OR of DR increased with a gradual increase in MA levels. Similarly, in the prospective study, during a mean follow-up of 4.5 years, we found that 51 patients (29.0% of the 176 subjects with high MA level (10.7-30 mg/24 h developed DR, while 17 patients (14.1% of the 121 subjects with lower MA (<10.7 mg/24 h developed DR, and the relative risk ratio of the development of DR is 2.13(95% CI, 1.58-3.62, P<0.001. CONCLUSION: These data suggest that an MA threshold can predict the risk for the development of DR in type 2 diabetes mellitus, although it is still within the traditionally established normal range.

  5. Biological Principles and Threshold Concepts for Understanding Natural Selection. Implications for Developing Visualizations as a Pedagogic Tool

    Science.gov (United States)

    Tibell, Lena A. E.; Harms, Ute

    2017-11-01

    Modern evolutionary theory is both a central theory and an integrative framework of the life sciences. This is reflected in the common references to evolution in modern science education curricula and contexts. In fact, evolution is a core idea that is supposed to support biology learning by facilitating the organization of relevant knowledge. In addition, evolution can function as a pivotal link between concepts and highlight similarities in the complexity of biological concepts. However, empirical studies in many countries have for decades identified deficiencies in students' scientific understanding of evolution mainly focusing on natural selection. Clearly, there are major obstacles to learning natural selection, and we argue that to overcome them, it is essential to address explicitly the general abstract concepts that underlie the biological processes, e.g., randomness or probability. Hence, we propose a two-dimensional framework for analyzing and structuring teaching of natural selection. The first—purely biological—dimension embraces the three main principles variation, heredity, and selection structured in nine key concepts that form the core idea of natural selection. The second dimension encompasses four so-called thresholds, i.e., general abstract and/or non-perceptual concepts: randomness, probability, spatial scales, and temporal scales. We claim that both of these dimensions must be continuously considered, in tandem, when teaching evolution in order to allow development of a meaningful understanding of the process. Further, we suggest that making the thresholds tangible with the aid of appropriate kinds of visualizations will facilitate grasping of the threshold concepts, and thus, help learners to overcome the difficulties in understanding the central theory of life.

  6. Development of water radiocontamination monitor using a plastic scintillator detector

    International Nuclear Information System (INIS)

    Mesquita, C.H. de; Madi Filho, T.; Hamada, M.M.

    1990-01-01

    An alpha, beta and gamma radiation water monitor was developed using a plastic scintillator detector with a sensitivity level of 15 bplastic scintillator detector with a sensitivity level of 15 Bq.L -1 and a counting efficiency of 25% for 131 I. It was proposed to be used in the radiation monitoring program of the research reactor swimming-pool of Sao Paulo. A simplified design and some properties of this monitor are presented. (author) [pt

  7. Development of third Qinshan nuclear power plant risk monitor

    International Nuclear Information System (INIS)

    Wu Yican; Hu Liqin; Li Yazhou

    2011-01-01

    A risk monitor, an integrated risk analysis tool for real-time monitoring, was widely used in the management of nuclear power plants around the world. A risk monitor prototype system, named RiskAngel, has been developed by FDS Team, China, in which the fault tree analysis engine RiskA was integrated. Based on these, Third Qinshan nuclear power plant Risk Monitor (TQRM) has been developed considering the safety characteristics and the management process of Third Qinshan nuclear power plant. The status and development trend of risk monitor were given in this paper. An overview of the architecture and functions of TQRM was introduced. The key algorithms and technical features were also presented. (authors)

  8. Development of mobile air pollution monitoring system (LIDAR)

    Energy Technology Data Exchange (ETDEWEB)

    Cha, Hyung Ki; Song, Kyu Seok; Kim, Dukh Yeon; Yang, Ki Ho; Lee, Jong Min; Yoon, S.; Rostov, A

    2001-01-01

    Most air pollution monitoring technologies accompany a time-consuming sample treatment and provide pollution information only for a local area. Thus, they have a critical restriction in monitoring time-dependent pollution variation effectively over the wide range of area both in height and in width. LIDAR(Light Detection And Ranging) is a new technology to overcome such drawbacks of the existing pollution monitoring technologies and has long been investigated in the advanced countries. The coal of this project is to develop the mobile air pollution monitoring system and to apply the system to the detection of various pollutants, such as ozone, nitrogen dioxide, sulfur dioxide and aerosols.

  9. Monitoring 5p-4d soft X-ray emission of La when exciting through the low-lying 3d-4f threshold

    International Nuclear Information System (INIS)

    Moewes, A.; Wilks, R.; Kochur, A.G.; Kurmaev, E.Z.

    2005-01-01

    The intensity of the La 5p → 4d emission of La metal is being monitored while scanning across the deeper-lying 3d → 4f photoexcitation thresholds of the same atom. We find a strong resonant enhancement in the La 5p-4d fluorescence emission (around 83 eV) when exciting at the 3d → 4f resonances (829-852 eV). We show that the emission behavior is due to cascading decay of the resonantly excited 3d 9 4f +1 configuration. The number of 4d-vacancies increases immensely due to electronic cascades. By calculating the probability of the 5p → 4d emission resulting from cascading decay and then taking into account self-absorption of the emitted photons, we obtain good agreement with the experimental results. We also report an enhanced integral intensity in the 5p → 4d fluorescence, which we attribute to intra-atomic resonance processes

  10. Development of an induction motor abnormality monitoring system(IMAMS) using power line signal analysis

    International Nuclear Information System (INIS)

    Jung, Jae Cheon

    1997-02-01

    An induction motor abnormality monitoring system using power line signal analysis is developed in this work. Various studies have focused their attention on the detection of particular harmonic frequencies produced from each defect mode of motors. However, these harmonic frequencies are valuable only when the motor has a continuous slip frequency and operate in constant torque/load condition. The basic concept of the system developed in this work is to detect the characteristic harmonic frequencies occurred when the motor is in abnormal state and to compare it with a predetermined setpoint. Based on these analyses, the place and degree of defect can be easily identified. The experimental results under test bench simulation are also introduced. To find out an alternative way to obtain a threshold level independent of slip/torque, with the rotating field theory, the ratio between harmonic current and total current was calculated with the simplified circuit that is equivalent to two abnormal cases, such as the spatial rotor resistance variation and the symmetrical components changes with field. Also, the threshold level calculation was done with performed the rotating field theory. The results show that they are in good agreement with a experimental results. Further studies are undertaken to extend this work to the on-line monitoring and diagnostic system with a likelihood ratio test method for field application

  11. Development of monitoring technology for environmental radioactivity

    International Nuclear Information System (INIS)

    Lee, Chang Woo; Cho, Young Hyun; Lee, M. H.; Choi, K. S.; Hong, K. H.; Sin, H. S.; Kim, M. K.; Pak, J. H.

    2000-05-01

    The accurate and reliable determination techniques of the radioactive isotopes in environmental samples are very important to protect public health from the potential hazards of radiation. Isolation and purification of radiostrontium from environmental aqueous sample was performed by using strontium selectively binding resin (Sr-spec) and strontium selectively permeable liquid membrane. Radioactivity of radiostrontium was measured by liquid scintillation counter coupled with dual counting window and spectrum unfolding method. With combustion apparatus a new determination of Tc-99 in the environmental samples was developed for overcoming demerits of conventional TBP extraction method. An optimized method for determining beta-emitting 2 41Pu in the presence of alpha-emitting nuclides was developed using a liquid scintillation counting system. A method for measuring Rn-222 and Ra-226 in aqueous sample using liquid scintillation counting technique has studied. On-line measurement system coupled with ion chromatography and portable liquid scintillation detector was developed. U and Th measured by inductively coupled plasma mass spectrometry (ICP-MS). The mehtod of flow-injection preconcentration for the analysis of U and Th in seawater was developed. A new electrodeposition method for alpha spectrometry was developed

  12. Development of monitoring technology for environmental radioactivity

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Chang Woo; Cho, Young Hyun; Lee, M. H.; Choi, K. S.; Hong, K. H.; Sin, H. S.; Kim, M. K.; Pak, J. H

    2000-05-01

    The accurate and reliable determination techniques of the radioactive isotopes in environmental samples are very important to protect public health from the potential hazards of radiation. Isolation and purification of radiostrontium from environmental aqueous sample was performed by using strontium selectively binding resin (Sr-spec) and strontium selectively permeable liquid membrane. Radioactivity of radiostrontium was measured by liquid scintillation counter coupled with dual counting window and spectrum unfolding method. With combustion apparatus a new determination of Tc-99 in the environmental samples was developed for overcoming demerits of conventional TBP extraction method. An optimized method for determining beta-emitting {sup 2}41Pu in the presence of alpha-emitting nuclides was developed using a liquid scintillation counting system. A method for measuring Rn-222 and Ra-226 in aqueous sample using liquid scintillation counting technique has studied. On-line measurement system coupled with ion chromatography and portable liquid scintillation detector was developed. U and Th measured by inductively coupled plasma mass spectrometry (ICP-MS). The mehtod of flow-injection preconcentration for the analysis of U and Th in seawater was developed. A new electrodeposition method for alpha spectrometry was developed.

  13. The Uncertain Relationship between Corruption and Growth in Developing Countries: Threshold Effects and State Effectiveness

    OpenAIRE

    Alice N. Sindzingre; Christian Milelli

    2010-01-01

    In the literature of development economics, corruption is usually conceived as detrimental to economic growth. This conventional wisdom, however, may be called into question. Many countries witnessed growth despite corruption, e.g., commodity-dependent and high-growth East Asian countries. The paper argues, through a comparison of Sub-Saharan Africa and East Asia, that the relationships between corruption and economic growth are difficult to demonstrate. It highlights two crucial factors that...

  14. Towards developing drought impact functions to advance drought monitoring and early warning

    Science.gov (United States)

    Bachmair, Sophie; Stahl, Kerstin; Hannaford, Jamie; Svoboda, Mark

    2015-04-01

    In natural hazard analysis, damage functions (also referred to as vulnerability or susceptibility functions) relate hazard intensity to the negative effects of the hazard event, often expressed as damage ratio or monetary loss. While damage functions for floods and seismic hazards have gained considerable attention, there is little knowledge on how drought intensity translates into ecological and socioeconomic impacts. One reason for this is the multifaceted nature of drought affecting different domains of the hydrological cycle and different sectors of human activity (for example, recognizing meteorological - agricultural - hydrological - socioeconomic drought) leading to a wide range of drought impacts. Moreover, drought impacts are often non-structural and hard to quantify or monetarize (e.g. impaired navigability of streams, bans on domestic water use, increased mortality of aquatic species). Knowledge on the relationship between drought intensity and drought impacts, i.e. negative environmental, economic or social effects experienced under drought conditions, however, is vital to identify critical thresholds for drought impact occurrence. Such information may help to improve drought monitoring and early warning (M&EW), one goal of the international DrIVER project (Drought Impacts: Vulnerability thresholds in monitoring and Early-warning Research). The aim of this study is to test the feasibility of designing "drought impact functions" for case study areas in Europe (Germany and UK) and the United States to derive thresholds meaningful for drought impact occurrence; to account for the multidimensionality of drought impacts, we use the broader term "drought impact function" over "damage function". First steps towards developing empirical drought impact functions are (1) to identify meaningful indicators characterizing the hazard intensity (e.g. indicators expressing a precipitation or streamflow deficit), (2) to identify suitable variables representing impacts

  15. Threshold concepts in prosthetics.

    Science.gov (United States)

    Hill, Sophie

    2017-12-01

    Curriculum documents identify key concepts within learning prosthetics. Threshold concepts provide an alternative way of viewing the curriculum, focussing on the ways of thinking and practicing within prosthetics. Threshold concepts can be described as an opening to a different way of viewing a concept. This article forms part of a larger study exploring what students and staff experience as difficult in learning about prosthetics. To explore possible threshold concepts within prosthetics. Qualitative, interpretative phenomenological analysis. Data from 18 students and 8 staff at two universities with undergraduate prosthetics and orthotics programmes were generated through interviews and questionnaires. The data were analysed using an interpretative phenomenological analysis approach. Three possible threshold concepts arose from the data: 'how we walk', 'learning to talk' and 'considering the person'. Three potential threshold concepts in prosthetics are suggested with possible implications for prosthetics education. These possible threshold concepts involve changes in both conceptual and ontological knowledge, integrating into the persona of the individual. This integration occurs through the development of memories associated with procedural concepts that combine with disciplinary concepts. Considering the prosthetics curriculum through the lens of threshold concepts enables a focus on how students learn to become prosthetists. Clinical relevance This study provides new insights into how prosthetists learn. This has implications for curriculum design in prosthetics education.

  16. MONITORING MECHANISM FOR INVESTMENT DEVELOPMENT OF REGIONS’ INFRASTRUCTURE

    Directory of Open Access Journals (Sweden)

    Halyna Leshuk

    2017-09-01

    Full Text Available The subject of the research is the theoretical and methodological principles of the monitoring mechanism of investment development of regions’ infrastructure. The objectives of the research are the generalization of theoretical and methodological bases of monitoring mechanism of investment development of regions’ infrastructure, as well as analysis of the current trends of investment development of the infrastructure in the regions of Ukraine with the identification of positive and negative trends. Methodology. The article deals with theoretical and methodological approaches to the definition of conceptual foundations of the mechanism of monitoring the investment development of the regions’ infrastructure with the help of general scientific methods of analysis: systematization and generalization, induction, and deduction. Results. It is proposed to interpret a monitor of the investment development of the regional infrastructure (IDRI as a systematic and complex measurement of the indicators of regional infrastructure development, the number of implemented investment projects, monitoring compliance with the developed strategic regional programs and concepts, which will ultimately help to effectively and efficiently regulate the detected deviations and passing the appropriate decisions. The IDRI monitoring mechanism should also provide a possibility of creating a system for collecting and analysing data concerning the assessment of infrastructure objects by the territorial community, which will allow potential investors to focus not only on analytical data on monitoring of regional authorities but also to take into account the public interest in a particular region. The general principles of the monitoring mechanism of investment development of the regions infrastructure are proposed in the following directions: complex and system monitoring and data collection concerning the development of the regions’ infrastructure, while the aggregate

  17. Development of oil and gas sector monitoring in Perm territory

    Directory of Open Access Journals (Sweden)

    Galina Vasil'evna Kutergina

    2012-03-01

    Full Text Available This paper reviews current approaches to the definition of «regional monitoring» and its contents. The work is based on the use of a systematic approach to the analysis of regional monitoring, reviewing it as part of the overall control system and risk management in the region.Organization of regional monitoring is considered on the example of oil and gas complex (OGC of Perm territory. This paper summarizes the structure of the OGC, the specific features of the activities of the enterprises that have the most significant impact on the organization of monitoring. The findings are based on an analysis and compilation of statistics. Authors consider in most details the subjects and objects of state and corporate level monitoring of the regional OGC in Perm territory, their main function of monitoring, interoperability issues, methodological support of various institutions in the periodic monitoring of OGC - the audit committees and internal audit units. Proposals for the development in most parts refer to the use of risk-oriented approach to organizing periodic monitoring of oil and gas industry in the territory on the basis of a common methodology for assessing its effectiveness. The proposals to expand cooperation between state agencies and regional bodies of governance of OGC enterprises in Perm territory on a wide range of areas of the organization of monitoring: the exchange of professional information, methodology, activities, staff and others.

  18. Development of a Plant Health Index Monitor

    International Nuclear Information System (INIS)

    Since 2008, BNF Technology Inc. and Kyung Hee University have developed the 'Plant Health Index (PHI)' which is a software package to detect 'unhealthy conditions' of plant equipment in advance. While the difference between a setpoint and an operational condition is called 'process margin', the residual between an anticipated normal condition and an operational condition is called 'process uncertainty' or 'healthiness' in this study. It is obvious that the anomalies in process uncertainty can be observed earlier than those in process margin, which is the concept of 'early-warning' proposed in the recent condition-based maintenance (CBM) studies. One of the key factors for implementing the early warning capability should be how to expect the anticipated normal conditions using available information. The PHI was developed on the basis of empirical models, and we have published a few papers with regarding to the core technologies of the PHI. However, the overall architecture and features of the PHI have not been introduced to academic area so far. This paper delineates the overview of the PHI, and focuses on the recently developed module, which is the health index generator

  19. Development of a Plant Health Index Monitor

    Energy Technology Data Exchange (ETDEWEB)

    Heo, Gyun Young [Kyung Hee University, Yongin (Korea, Republic of); An, Sang Ha [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of); Seo, Ho Joon [BNF Technology Inc., Daejeon (Korea, Republic of); Kim, Cho [Korea South-East Power Co., Seoul (Korea, Republic of)

    2010-05-15

    Since 2008, BNF Technology Inc. and Kyung Hee University have developed the 'Plant Health Index (PHI)' which is a software package to detect 'unhealthy conditions' of plant equipment in advance. While the difference between a setpoint and an operational condition is called 'process margin', the residual between an anticipated normal condition and an operational condition is called 'process uncertainty' or 'healthiness' in this study. It is obvious that the anomalies in process uncertainty can be observed earlier than those in process margin, which is the concept of 'early-warning' proposed in the recent condition-based maintenance (CBM) studies. One of the key factors for implementing the early warning capability should be how to expect the anticipated normal conditions using available information. The PHI was developed on the basis of empirical models, and we have published a few papers with regarding to the core technologies of the PHI. However, the overall architecture and features of the PHI have not been introduced to academic area so far. This paper delineates the overview of the PHI, and focuses on the recently developed module, which is the health index generator

  20. Radiation protection monitoring in tropical, developing countries

    International Nuclear Information System (INIS)

    Becker, K.; Drexler, G.

    1979-01-01

    Almost all radiation protection standards, manuals and textbooks have been written in and for industrialized countries in temperate climates, and most research effort and instrument manufacturers are also located there. There has been relatively little interest in the completely different socio-economic and climatic conditions in many developing countries. Some of the important differences in conditions, such as high temperatures and relative humidities, electric-power failures and voltage fluctuations, shortage of trained manpower, etc., are discussed, and suggestions are made how to minimize their impacts. Other important matters that are considered are recruitment and training, optimized organizational structures, and the proper choice of research topics in the radiation protection field. (author)

  1. Development of kits for total PSA monitoring

    International Nuclear Information System (INIS)

    Suprarop, P.

    1999-01-01

    The development of kits for Total PSA assay has shown promising results. All essential components of the assay were prepared with reproducibility and used to optimize the assay. By choosing two steps method, we could avoid the hook effect and obtain satisfactory Q.C. parameters of the standard curve i.e. blank = 0.8%, maximum binding = 65%. If reference material for calibration of the standard is agree upon, the validation could then be carried out with total confidence. Our final goal is to reduce the step of incubation to just one step with no interference from hook effect

  2. Monitoring osseointegration and developing intelligent systems (Conference Presentation)

    Science.gov (United States)

    Salvino, Liming W.

    2017-05-01

    Effective monitoring of structural and biological systems is an extremely important research area that enables technology development for future intelligent devices, platforms, and systems. This presentation provides an overview of research efforts funded by the Office of Naval Research (ONR) to establish structural health monitoring (SHM) methodologies in the human domain. Basic science efforts are needed to utilize SHM sensing, data analysis, modeling, and algorithms to obtain the relevant physiological and biological information for human-specific health and performance conditions. This overview of current research efforts is based on the Monitoring Osseointegrated Prosthesis (MOIP) program. MOIP develops implantable and intelligent prosthetics that are directly anchored to the bone of residual limbs. Through real-time monitoring, sensing, and responding to osseointegration of bones and implants as well as interface conditions and environment, our research program aims to obtain individualized actionable information for implant failure identification, load estimation, infection mitigation and treatment, as well as healing assessment. Looking ahead to achieve ultimate goals of SHM, we seek to expand our research areas to cover monitoring human, biological and engineered systems, as well as human-machine interfaces. Examples of such include 1) brainwave monitoring and neurological control, 2) detecting and evaluating brain injuries, 3) monitoring and maximizing human-technological object teaming, and 4) closed-loop setups in which actions can be triggered automatically based on sensors, actuators, and data signatures. Finally, some ongoing and future collaborations across different disciplines for the development of knowledge automation and intelligent systems will be discussed.

  3. A microalbuminuria threshold to predict the risk for the development of diabetic retinopathy in type 2 diabetes mellitus patients.

    Science.gov (United States)

    Chen, Haibing; Zheng, Zhi; Huang, Yan; Guo, Kaifeng; Lu, Junxi; Zhang, Lei; Yu, Haoyong; Bao, Yuqian; Jia, Weiping

    2012-01-01

    To test the hypothesis that a microalbuminuria (MA) threshold can help predict the risk for the development of diabetic retinopathy (DR) in type 2 diabetes mellitus (T2DM)_ patients. We conducted a cross-sectional study of 4739 subjects with T2DM and a prospective study of 297 subjects with T2DM in China respectively. Clinical and laboratory data were collected and biologic risk factors associated with any DR were analysed. In the cross-sectional study, we found that MA was an independent risk factor for DR development; further, when the patients were divided into MA deciles, odds ratio (ORs) of DR for the patients in the sixth MA decile (10.7 mg/24 h) was 1.579-fold (1.161-2.147) compared to that for patients in the first MA decile. Furthermore, the OR of DR increased with a gradual increase in MA levels. Similarly, in the prospective study, during a mean follow-up of 4.5 years, we found that 51 patients (29.0%) of the 176 subjects with high MA level (10.7-30 mg/24 h) developed DR, while 17 patients (14.1%) of the 121 subjects with lower MA (predict the risk for the development of DR in type 2 diabetes mellitus, although it is still within the traditionally established normal range.

  4. Experience in developing countries in monitoring procurement and fabrication

    International Nuclear Information System (INIS)

    Csik, B.J.

    1977-01-01

    Owner's responsibility in monitoring procurement and fabrication. Monitoring ectivity, tasks, knowledge and personnel requirements, scope and organization. Contractual arrangements, commitments, responsibilities, rights and obligations. Domestic and foreign supplies. Staff and consultants. Experience in developing countries. Problem areas: availability of qualified staff, organization, methodology standards, codes, specifications, availability and flow of information, language, technical knowledge, access to suppliers' facilities, delays, nuclear safety related components, modifications and additionals. (orig.) [de

  5. The Canarian Seismic Monitoring Network: design, development and first result

    Science.gov (United States)

    D'Auria, Luca; Barrancos, José; Padilla, Germán D.; García-Hernández, Rubén; Pérez, Aaron; Pérez, Nemesio M.

    2017-04-01

    Tenerife is an active volcanic island which experienced several eruptions of moderate intensity in historical times, and few explosive eruptions in the Holocene. The increasing population density and the consistent number of tourists are constantly raising the volcanic risk. In June 2016 Instituto Volcanologico de Canarias started the deployment of a seismological volcano monitoring network consisting of 15 broadband seismic stations. The network began its full operativity in November 2016. The aim of the network are both volcano monitoring and scientific research. Currently data are continuously recorded and processed in real-time. Seismograms, hypocentral parameters, statistical informations about the seismicity and other data are published on a web page. We show the technical characteristics of the network and an estimate of its detection threshold and earthquake location performances. Furthermore we present other near-real time procedures on the data: analysis of the ambient noise for determining the shallow velocity model and temporal velocity variations, detection of earthquake multiplets through massive data mining of the seismograms and automatic relocation of events through double-difference location.

  6. Nuclear Explosion Monitoring History and Research and Development

    Science.gov (United States)

    Hawkins, W. L.; Zucca, J. J.

    2008-12-01

    Within a year after the nuclear detonations over Hiroshima and Nagasaki the Baruch Plan was presented to the newly formed United Nations Atomic Energy Commission (June 14, 1946) to establish nuclear disarmament and international control over all nuclear activities. These controls would allow only the peaceful use of atomic energy. The plan was rejected through a Security Council veto primarily because of the resistance to unlimited inspections. Since that time there have been many multilateral, and bilateral agreements, and unilateral declarations to limit or eliminate nuclear detonations. Almost all of theses agreements (i.e. treaties) call for some type of monitoring. We will review a timeline showing the history of nuclear testing and the more important treaties. We will also describe testing operations, containment, phenomenology, and observations. The Comprehensive Nuclear Test Ban Treaty (CTBT) which has been signed by 179 countries (ratified by 144) established the International Monitoring System global verification regime which employs seismic, infrasound, hydroacoustic and radionuclide monitoring techniques. The CTBT also includes on-site inspection to clarify whether a nuclear explosion has been carried out in violation of the Treaty. The US Department of Energy (DOE) through its National Nuclear Security Agency's Ground-Based Nuclear Explosion Monitoring R&D Program supports research by US National Laboratories, and universities and industry internationally to detect, locate, and identify nuclear detonations. This research program builds on the broad base of monitoring expertise developed over several decades. Annually the DOE and the US Department of Defense jointly solicit monitoring research proposals. Areas of research include: seismic regional characterization and wave propagation, seismic event detection and location, seismic identification and source characterization, hydroacoustic monitoring, radionuclide monitoring, infrasound monitoring, and

  7. Development of an early-warning system for monitoring remote volcanoes

    Directory of Open Access Journals (Sweden)

    G. Sauvage

    1996-06-01

    Full Text Available Many andesitic volcanoes are quiescent for long time periods: usually (but not always an increase in seismic activity and in deformation precedes an eruption by a few months or a few days. A UNESCO panel has put forward the concept of an early warning system for monitoring dormant volcanoes in remote regions. Simple seismic or deformation measuring devices can in principle be built for monitoring remote volcanoes. These instruments are composed of two units: 1 a processor that measures the baseline «activity» of the volcano and decides when the activity increases above a certain threshold; 2 a transmitter for long distance communication. For slow parameters like tilt or extensometry, the signal can be transmitted every few minutes or hours. For seismology, signals include a large quantity of data and therefore they are usually not transmitted. The processing unit is not easy to design because a single seismic station can record noises that are very similar to «volcanic events». Average noise level on a given time interval, event detection counters and high amplitude ground motion counters are a simple (but not exhaustive way to summarize seismic activity. The transmission of data from the field to a monitoring center is feasible by present and future satellite telemetry. We present our attempt to develop an early warning system for remote volcano monitoring with data transmission by satellite.

  8. Development of an On-Line Uranium Enrichment Monitor

    International Nuclear Information System (INIS)

    Xuesheng, L.; Guorong, L.; Yonggang, Z.; Xueyuan, H. X.-Y.

    2015-01-01

    An on-line enrichment monitor was developed to measure the enrichment of UF6 flowing through the processing pipes in centrifuge uranium enrichment plant. A NaI(Tl) detector was used to measure the count rates of the 186 keV gamma ray emitted from 235U, and the total quantity of uranium was determined from thermodynamic characteristics of gaseous uranium hexafluoride. The results show that the maximum relative standard deviation is less than 1% when the measurement time is 120 s or more and the pressure is more than 2 kPa in the measurement chamber. There are two working models for the monitor. The monitor works normally in the continuous model, When the gas's pressure in the pipe fluctuates greatly, it can work in the intermittent model, and the measurement result is very well. The background of the monitor can be measured automatically periodically. It can control automatically electromagnetic valves open and close, so as to change the gas's quantity in the chamber. It is a kind of unattended and remote monitor, all of data can be transfer to central control room. It should be effective for nuclear materials accountability verifications and materials balance verification at uranium enrichment plant by using the monitor to monitor Uranium enrichment of gaseous uranium hexafluoride in the output end of cascade continuously. (author)

  9. Development of a PZT-based wireless digital monitor for composite impact monitoring

    International Nuclear Information System (INIS)

    Liu, Peipei; Yuan, Shenfang; Qiu, Lei

    2012-01-01

    One of the major concerns in the whole lifetime of composite materials in aircraft is their susceptibility to impact damage. And there has existed a need in recent years to develop an online structural health monitoring (SHM) system for impact monitoring. This paper proposes a new PZT-based wireless digital impact monitoring system development method aimed at giving a localized area for further inspection. Based on this method, a PZT-based wireless digital impact monitor (WDIM) with advantages of compactness, light weight, low power consumption and high efficiency is developed. Differently from conventional SHM systems, the complex analog circuits are removed and the whole process is achieved in a digital way by turning the output of the PZT sensor directly into a digital queue through a comparator. A simple but efficient sub-region location method is implemented in a field programmable gate array (FPGA) as the processing core of the WDIM to detect and record the impact events. In addition, wireless communication technology is used in the WDIM to transmit data and form a monitoring network. To illustrate the capability of the WDIM, a complete process dealing with an impact event is investigated and the stability of the WDIM is also evaluated in this paper. The WDIM shows its potential for real online applications in aircraft. (paper)

  10. Development of a national environmental monitoring programme for radionuclides - Sweden

    International Nuclear Information System (INIS)

    Wallberg, P.J.; Hubbard, L.M.

    2003-01-01

    In parallel with the enforcement of the Environmental Code in 1999, the Swedish parliament adopted 15 national environmental quality objectives that aim towards a sustainable development for the country. The government's primary environmental objective is to hand over a society to the next generation in which the major environmental problems have been solved. One of the quality objectives is 'A Safe Radiation Environment' of which the Swedish Radiation Protection Authority (SSI) is the responsible authority. In order to follow the progress towards this objective SSI is currently developing a national environmental monitoring and assessment programme for radionuclides. Many countries have monitoring programmes in the vicinity of nuclear power plants and nuclear industries, as Sweden has also had for many years. The current Swedish effort is a development beyond the local monitoring programmes to incorporate radiation assessment at a national level. This includes long-term issues such as identification of ecological processes that can concentrate radionuclides, and assessment of activities other than nuclear industries that lead to radioactive releases. One of the expected results of this monitoring programme is an improved framework for assessing the dynamics and impact of radionuclide transfer and containment in different ecosystems. This paper will focus on the development and implementation of the framework for a national monitoring programme, include some examples of environments that have been identified as areas of particular concern, and describe an approach to protect species with different ecological prerequisites. (author)

  11. Development and application of all-digital monitoring system

    International Nuclear Information System (INIS)

    Xu Tao; Li Jing; Wang Wei

    2014-01-01

    All digital control system has developed into a mainstream means of monitoring, and achieved information, intelligence, and networking. All-digital control system is characterized by clear image, large transport stream, so the higher the data storage and network bandwidth should be required. Existing analog surveillance system architecture, hardware and software configuration can not meet the requirements of all-digital monitoring system, so how to solve the original analog surveillance system is gradually transformed into fully digital monitoring system, to avoid incompatibility issues in surveillance monitoring system upgrade become a research project. This paper describes the advantages and future direction of megapixels camera and proposes key technologies to solve the resolution and frame rate with the actual project requirements, achieves a core technology of megapixels video surveillance system, and proposes solutions for the actual renovation project problems. (authors)

  12. Hanford coring bit temperature monitor development testing results report

    International Nuclear Information System (INIS)

    Rey, D.

    1995-05-01

    Instrumentation which directly monitors the temperature of a coring bit used to retrieve core samples of high level nuclear waste stored in tanks at Hanford was developed at Sandia National Laboratories. Monitoring the temperature of the coring bit is desired to enhance the safety of the coring operations. A unique application of mature technologies was used to accomplish the measurement. This report documents the results of development testing performed at Sandia to assure the instrumentation will withstand the severe environments present in the waste tanks

  13. Monitoring soil for sustainable development and land degradation neutrality

    OpenAIRE

    Tóth, Gergely; Hermann, Tamás; da Silva, Manuela Ravina; Montanarella, Luca

    2018-01-01

    The adoption of the 17 sustainable development goals (SDGs) listed in the 2030 Agenda for Sustainable Development by the United Nations urged the scientific community to generate information for planning and monitoring socioeconomic development and the underlying environmental compartments. SDGs 2, 3, 6, 11, 13, 14, and 15 have targets which commend direct consideration of soil resources. There are five groups of SDGs and assigned SDG indicators where soil plays a central role. Frameworks of ...

  14. Development of a threshold model to predict germination of Populus tomentosa seeds after harvest and storage under ambient condition.

    Science.gov (United States)

    Wang, Wei-Qing; Cheng, Hong-Yan; Song, Song-Quan

    2013-01-01

    Effects of temperature, storage time and their combination on germination of aspen (Populus tomentosa) seeds were investigated. Aspen seeds were germinated at 5 to 30°C at 5°C intervals after storage for a period of time under 28°C and 75% relative humidity. The effect of temperature on aspen seed germination could not be effectively described by the thermal time (TT) model, which underestimated the germination rate at 5°C and poorly predicted the time courses of germination at 10, 20, 25 and 30°C. A modified TT model (MTT) which assumed a two-phased linear relationship between germination rate and temperature was more accurate in predicting the germination rate and percentage and had a higher likelihood of being correct than the TT model. The maximum lifetime threshold (MLT) model accurately described the effect of storage time on seed germination across all the germination temperatures. An aging thermal time (ATT) model combining both the TT and MLT models was developed to describe the effect of both temperature and storage time on seed germination. When the ATT model was applied to germination data across all the temperatures and storage times, it produced a relatively poor fit. Adjusting the ATT model to separately fit germination data at low and high temperatures in the suboptimal range increased the models accuracy for predicting seed germination. Both the MLT and ATT models indicate that germination of aspen seeds have distinct physiological responses to temperature within a suboptimal range.

  15. Evaluation of neutron monitor cross sections for 63,65,NatCu(n,x)56∼58,60Co reactions from threshold to 70 MeV

    International Nuclear Information System (INIS)

    Yu Baosheng; Shen Qingbiao; Cai Dunjiu

    1995-01-01

    The cross sections for monitor reactions 63,65,Nat Cu(n,x) 56∼58,60 Co were analysed and evaluated based on measured data and theoretically calculated results from threshold up to 70 MeV. The recommended data could reproduce the experimental data very well. In higher energy region, the data wee provided by theoretical calculation with adjusted model parameters based on measured data. (1 tab., 6 figs.)

  16. The development of wireless radiation dose monitoring using smart phone

    International Nuclear Information System (INIS)

    Lee, Jin Woo; Jeong, Gyo Seong; Lee, Yun Jong; Kim, Chong Yeal; Lim, Chai Wan

    2016-01-01

    Radiation workers at a nuclear facility or radiation working area should hold personal dosimeters. some types of dosimeters have functions to generate audible or visible alarms to radiation workers. However, such devices used in radiation fields these days have no functions to communicate with other equipment or the responsible personnel. our project aims at the development of a remote wireless radiation dose monitoring system that can be utilized to monitor the radiation dose for radiation workers and to notify the radiation protection manager of the dose information in real time. We use a commercial survey meter for personal radiation measurement and a smart phone for a mobile wireless communication tool and a Beacon for position detection of radiation workers using Blue tooth communication. In this report, the developed wireless dose monitoring of cellular phone is introduced

  17. New Developments in Long-Term Downhole Monitoring Arrays

    Directory of Open Access Journals (Sweden)

    Jochem Kück

    2006-03-01

    Full Text Available The long-term observation of active geological processes is a major research goal in an increasing number of scientific drilling projects. An extended monitoring phase within a potentially hostile environment (e.g., temperature, pressure, salinity requires new long-lasting and robust instrumentation currently unavailable from either industry or academia. Extended exposure of instrument packages to extreme conditions will typically cause seals to weaken and fail,electronic parts to break under permanent load, and sensors to degrade or develop strong drift. In the framework of scientific exploration, there are currently several major research projects targeting fault zone drilling and in situ measurements to monitor physical and chemical conditions before, during, and after seismic events. Planning has now begun for tool development, testing, and continuous long-term monitoring for the San Andreas Fault Zone Observatory at Depth, SAFOD (Parkfi eld, Calif., U.S.A.; See article on page 32..

  18. Trends in Nuclear Explosion Monitoring Research & Development - A Physics Perspective

    Energy Technology Data Exchange (ETDEWEB)

    Maceira, Monica [Los Alamos National Laboratory; Blom, Philip Stephen [Los Alamos National Laboratory; Maccarthy, Jonathan K. [Los Alamos National Laboratory; Marcillo, Omar Eduardo [Los Alamos National Laboratory; Euler, Garrett Gene [Los Alamos National Laboratory; Begnaud, Michael Lee [Los Alamos National Laboratory; Ford, Sean R. [Lawrence Livermore National Laboratory; Pasyanos, Michael E. [Lawrence Livermore National Laboratory; Orris, Gregory J. [Naval Research Laboratory; Foxe, Michael P. [Pacific Northwest National Laboratory; Arrowsmith, Stephen J. [Sandia National Laboratory; Merchant, B. John [Sandia National Laboratory; Slinkard, Megan E. [Sandia National Laboratory

    2017-06-01

    This document entitled “Trends in Nuclear Explosion Monitoring Research and Development – A Physics Perspective” reviews the accessible literature, as it relates to nuclear explosion monitoring and the Comprehensive Nuclear-Test-Ban Treaty (CTBT, 1996), for four research areas: source physics (understanding signal generation), signal propagation (accounting for changes through physical media), sensors (recording the signals), and signal analysis (processing the signal). Over 40 trends are addressed, such as moving from 1D to 3D earth models, from pick-based seismic event processing to full waveform processing, and from separate treatment of mechanical waves in different media to combined analyses. Highlighted in the document for each trend are the value and benefit to the monitoring mission, key papers that advanced the science, and promising research and development for the future.

  19. Development and testing of a transparent membrane biofouling monitor

    KAUST Repository

    Dreszer, C.

    2014-01-02

    A modified version of the membrane fouling simulator (MFS) was developed for assessment of (i) hydraulic biofilm resistance, (ii) performance parameters feed-channel pressure drop and transmembrane pressure drop, and (iii) in situ spatial visual and optical observations of the biofilm in the transparent monitor, e.g. using optical coherence tomography. The flow channel height equals the feed spacer thickness enabling operation with and without feed spacer. The effective membrane surface area was enlarged from 80 to 200 cm2 by increasing the monitor width compared to the standard MFS, resulting in larger biomass amounts for analysis. By use of a microfiltration membrane (pore size 0.05 μm) in the monitor salt concentration polarization is avoided, allowing operation at low pressures enabling accurate measurement of the intrinsic hydraulic biofilm resistance. Validation tests on e.g. hydrodynamic behavior, flow field distribution, and reproducibility showed that the small-sized monitor was a representative tool for membranes used in practice under the same operating conditions, such as spiral-wound nanofiltration and reverse osmosis membranes. Monitor studies with and without feed spacer use at a flux of 20 L m-2 h-1 and a cross-flow velocity of 0.1 m s-1 clearly showed the suitability of the monitor to determine hydraulic biofilm resistance and for controlled biofouling studies. © 2013 Balaban Desalination Publications. All rights reserved.

  20. Development of micro controller-based monitoring system for a ...

    African Journals Online (AJOL)

    This paper is on the development of a simple, reliable and high precision photovoltaic monitoring system, which obtains PV system parameters (i.e. PV panel temperature, irradiance, PV battery voltage, ambient temperature and humidity and PV system load current) in real time, display and store the parameters in personal ...

  1. Design and development of a digital blood pressure monitor ...

    African Journals Online (AJOL)

    This paper presents a design and development of a digital blood pressure monitor. The device was designed with the help of a microcontroller PIC 16F688A, a power supply unit, a blood pressure sensor, a signal conditioning unit and an LCD display. The constructed and tested device was found to perform satisfactorily.

  2. Development and applications of energy-specific fluence monitor for field monitoring.

    Science.gov (United States)

    Krishnakumar, D N; Somayaji, K M; Venkatesan, R; Meenakshisundaram, V

    2011-07-01

    A portable energy-specific fluence monitor is developed for field monitoring as well as to serve as stand-alone data acquisition system to measure dose rate due to routine releases at various locations in and around Nuclear Power Reactors. The data from an array of such monitors deployed over a region of interest would help in evolving a methodology to arrive at the source term evaluation in the event of a postulated nuclear incident. The other method that exists for this purpose is by conducting tracer experiments using known release of a gas like SF(6) into the atmosphere and monitoring their concentrations downwind. The above instrument enables one to use the routine release of (41)Ar as a tracer gas. The Argon fluence monitor houses a CsI(Tl) detector and associated miniature electronics modules for conditioning the signal from the detector. Data logging and in-situ archival of the data are controlled by a powerful web enabled communication controller preloaded with Microsoft Windows Compact Edition (WIN CE). The application software is developed in Visual Basic.NET under Compact Framework and deployed in the module. The paper gives an outline of the design aspects of the instrument, associated electronics and calibration of the instrument, including the preliminary results obtained using the instrument. The utility of the system is established by carrying out field survey around Madras Atomic Power Station (MAPS), consisting of two Pressurized Heavy Water Reactors (PHWR), by mapping the (41)Ar plume. Additional features such as enhancing the monitor capability with embedded GPS along with real-time linking using wireless networking techniques are also being incorporated. Copyright © 2011 Elsevier Ltd. All rights reserved.

  3. Development of a medication monitoring attitude measure using a mixed methods item development process.

    Science.gov (United States)

    Witry, Matthew J; Wesely, Pamela M; Goedken, Amber M; Ernst, Erika J; Sorofman, Bernard A; Doucette, William R

    2016-02-01

    Medication monitoring is important for safe and effective medication use; however, no attitudinal measure exists for a health care provider's medication monitoring attitude. The objectives of this study were to (1) create a measure of a community pharmacist medication monitoring attitude; (2) test concurrent validity using a validated measure of medication monitoring behaviours; and (3) report community pharmacist attitudes towards medication monitoring. A mixed methods item development process was employed to generate Likert-type items from qualitative interviews. Following item review and piloting, a four-contact survey, including 20 6-point Likert-type items and the four-item Behavioral Pharmaceutical Care Scale monitoring domain, was mailed to 599 randomly sampled US community pharmacists from the state of Iowa. Exploratory factor analysis, Pearson's correlation and descriptive statistics were used to address study objectives. There were 254 (42.4%) returned and usable surveys. Factor analysis yielded two domains, a seven-item, positively worded internal (α = 0.819) and an eight-item, negatively worded external domain (α = 0.811). Both domains were positively correlated with the monitoring domain of the Behavioral Pharmaceutical Care Scale supporting convergent validity. Overall, respondents had a positive internal monitoring attitude with a mean of 4.62 (0.68), although many practiced in an environment less conducive to monitoring, as evident by a mean of 3.13 (0.88). Pharmacists were more oriented towards medication side effect and effectiveness monitoring than nonadherence monitoring. The mixed methods item development process created a reliable and valid measure of a pharmacist's medication monitoring attitude. While pharmacists had an overall positive medication monitoring attitude, improvements are needed to bolster adherence monitoring and make pharmacy environments more conducive to monitoring. © 2015 Royal Pharmaceutical Society.

  4. Development of a Remote Monitoring System Using Meteor Burst Technology

    International Nuclear Information System (INIS)

    Ewanic, M.A.; Dunstan, M.T.; Reichhardt, D.K.

    2006-01-01

    Monitoring the cleanup and closure of contaminated sites requires extensive data acquisition, processing, and storage. At remote sites, the task of monitoring often becomes problematical due to the lack of site infrastructure (i.e., electrical power lines, telephone lines, etc.). MSE Technology Applications, Inc. (MSE) has designed an economical and efficient remote monitoring system that will handle large amounts of data; process the data, if necessary; and transmit this data over long distances. Design criteria MSE considered during the development of the remote monitoring system included: the ability to handle multiple, remote sampling points with independent sampling frequencies; robust (i.e., less susceptible to moisture, heat, and cold extremes); independent of infrastructure; user friendly; economical; and easy to expand system capabilities. MSE installed and tested a prototype system at the Mike Mansfield Advanced Technology Center (MMATC), Butte, Montana, in June 2005. The system MSE designed and installed consisted of a 'master' control station and two remote 'slave' stations. Data acquired at the two slave stations were transmitted to the master control station, which then transmits a complete data package to a ground station using meteor burst technology. The meteor burst technology has no need for hardwired land-lines or man-made satellites. Instead, it uses ionized particles in the Earth's atmosphere to propagate a radio signal. One major advantage of the system is that it can be configured to accept data from virtually any type of device, so long as the signal from the device can be read and recorded by a standard data-logger. In fact, MSE has designed and built an electrical resistivity monitoring system that will be powered and controlled by the meteor burst system components. As sites move through the process of remediation and eventual closure, monitoring provides data vital to the successful long term management of the site. The remote

  5. Development of an electronic nose for environmental odour monitoring.

    Science.gov (United States)

    Dentoni, Licinia; Capelli, Laura; Sironi, Selena; Del Rosso, Renato; Zanetti, Sonia; Della Torre, Matteo

    2012-10-25

    Exhaustive odour impact assessment should involve the evaluation of the impact of odours directly on citizens. For this purpose it might be useful to have an instrument capable of continuously monitoring ambient air quality, detecting the presence of odours and also recognizing their provenance. This paper discusses the laboratory and field tests conducted in order to evaluate the performance of a new electronic nose, specifically developed for monitoring environmental odours. The laboratory tests proved the instrument was able to discriminate between the different pure substances being tested, and to estimate the odour concentrations giving correlation indexes (R2) of 0.99 and errors below 15%. Finally, the experimental monitoring tests conducted in the field, allowed us to verify the effectiveness of this electronic nose for the continuous detection of odours in ambient air, proving its stability to variable atmospheric conditions and its capability to detect odour peaks.

  6. The development of beam current monitors in the APS

    International Nuclear Information System (INIS)

    Wang, X.; Lenkszus, F.; Rotela, E.

    1995-01-01

    The Advanced Photon Source (APS) is a third-generation 7-GeV synchrotron radiation source. The precision measurement of beam current is a challenging task in high energy accelerators, such as the APS, with a wide range of beam parameters and complicated noise, radiation, and thermal environments. The beam pulses in the APS injector and storage ring have charge ranging from 50pC to 25nC with pulse durations varying from 30ps to 30ns. A total of nine non- intercepting beam current monitors have been installed in the APS facility (excluding those in the linac) for general current measurement. In addition, several independent current monitors with specially designed redundant interlock electronics are installed for personnel safety and machine protection. This paper documents the design and development of current monitors in the APS,. discusses the commissioning experience in the past year, and presents the results of recent operations

  7. Vital Effects in Coccolith Calcite: Cenozoic PCO2 Thresholds in the Development of Carbon Acquisition Strategies in Coccolithophores

    Science.gov (United States)

    Bolton, C. T.; Isensee, K.; Stoll, H. M.

    2011-12-01

    Coccolithophores are a unique group of oceanic calcifying phytoplankton that are affected by and feed back into both the organic (via photosynthetic carbon fixation) and inorganic (via calcification) carbon cycles. Their high sensitivity to changes in carbon chemistry and their long fossil record in oceanic sediments provide us with the opportunity to study the evolution of these carbon cycle interactions through time. Deviations from equilibrium during biogenic calcification can result from kinetic or metabolic ('vital') effects. The influence of changing atmospheric partial pressures of carbon dioxide (pCO2) throughout the Cenozoic was likely crucial in driving the development of different carbon acquisition strategies (CAS) that cause the vital effects seen in modern coccolithophores. Here we present new laboratory culture and fossil data examining vital effects in coccolithophores over a range of CO2 concentrations. ODP Site 999 stable isotope data from size-separated coccolith fractions dominated by different species over the Plio-Pleistocene climate transition (PPT) (3.5 to 2 Ma) show a persistent 2 % range of interspecific vital effects in oxygen and carbon isotopes. In contrast, isotope data from extremely well preserved Paleocene/Eocene thermal maximum (PETM) size-separated coccoliths (ODP Site 174AX, Bass River) suggest an absence of interpecific vital effects within the greenhouse boundary condtions of the PETM, suggesting similar CAS among species. Our culture and PPT results indicate a clear positive trend between cell size and C and O isotopic enrichment in coccolith carbonate, likely reflecting different CAS. The insensitivity of coccolith vital effects to pCO2 changes over the range inferred for the PPT (around 400 to 280 ppm) in combination with experimental data imply that the pCO2 threshold that drove the diversification of CAS in coccolithophores was crossed after the PETM but at significantly higher pCO2 than was in place during the PPT.

  8. Development of a Threshold Model to Predict Germination of Populus tomentosa Seeds after Harvest and Storage under Ambient Condition

    Science.gov (United States)

    Wang, Wei-Qing; Cheng, Hong-Yan; Song, Song-Quan

    2013-01-01

    Effects of temperature, storage time and their combination on germination of aspen (Populus tomentosa) seeds were investigated. Aspen seeds were germinated at 5 to 30°C at 5°C intervals after storage for a period of time under 28°C and 75% relative humidity. The effect of temperature on aspen seed germination could not be effectively described by the thermal time (TT) model, which underestimated the germination rate at 5°C and poorly predicted the time courses of germination at 10, 20, 25 and 30°C. A modified TT model (MTT) which assumed a two-phased linear relationship between germination rate and temperature was more accurate in predicting the germination rate and percentage and had a higher likelihood of being correct than the TT model. The maximum lifetime threshold (MLT) model accurately described the effect of storage time on seed germination across all the germination temperatures. An aging thermal time (ATT) model combining both the TT and MLT models was developed to describe the effect of both temperature and storage time on seed germination. When the ATT model was applied to germination data across all the temperatures and storage times, it produced a relatively poor fit. Adjusting the ATT model to separately fit germination data at low and high temperatures in the suboptimal range increased the models accuracy for predicting seed germination. Both the MLT and ATT models indicate that germination of aspen seeds have distinct physiological responses to temperature within a suboptimal range. PMID:23658654

  9. Development of infrared communication in radiation protection and monitoring

    International Nuclear Information System (INIS)

    Thakur, Vaishali M.; Choithramani, S.J.; Sharma, D.N.; Abani, M.C.

    2003-01-01

    Infra-red communication has many important applications in instrumentation and control. Different types of nuclear instruments are used for radiation protection and surveillance program. The application of this mode of communication in these instruments helps in monitoring of inaccessible or high radiation field areas by avoiding undue exposure to the occupational worker. The demand for remotely controlled monitoring instruments and wireless data communication in the mobile computing environment has rapidly increased. This is due to the increasing need for on-line radiological data analysis with minimum human interventions, especially so if the monitoring is in hazardous environment. The wireless communication can be achieved using different communication methodology for short and long range communication. The infrared based communication is used for different applications for short range up to 9-10 meters. The use of this mode of communication has been implemented in some of the radiation monitoring instruments developed in house. The evaluation of data communication using this mode was conducted for the systems like Environmental Radiation Monitor (ERM) and results showed that data communication error is less than 0.1% up to 10 meter distance. (author)

  10. Radiation safety assessment and development of environmental radiation monitoring technology

    CERN Document Server

    Choi, B H; Kim, S G

    2002-01-01

    The Periodic Safety Review(PSR) of the existing nuclear power plants is required every ten years according to the recently revised atomic energy acts. The PSR of Kori unit 1 and Wolsong unit 1 that have been operating more than ten years is ongoing to comply the regulations. This research project started to develop the techniques necessary for the PSR. The project developed the following four techniques at the first stage for the environmental assessment of the existing plants. 1) Establishment of the assessment technology for contamination and accumulation trends of radionuclides, 2) alarm point setting of environmental radiation monitoring system, 3) Development of Radiation Safety Evaluation Factor for Korean NPP, and 4) the evaluation of radiation monitoring system performance and set-up of alarm/warn set point. A dynamic compartment model to derive a relationship between the release rates of gas phase radionuclides and the concentrations in the environmental samples. The model was validated by comparing ...

  11. Development of structural health monitoring techniques using dynamics testing

    Energy Technology Data Exchange (ETDEWEB)

    James, G.H. III [Sandia National Labs., Albuquerque, NM (United States). Experimental Structural Dynamics Dept.

    1996-03-01

    Today`s society depends upon many structures (such as aircraft, bridges, wind turbines, offshore platforms, buildings, and nuclear weapons) which are nearing the end of their design lifetime. Since these structures cannot be economically replaced, techniques for structural health monitoring must be developed and implemented. Modal and structural dynamics measurements hold promise for the global non-destructive inspection of a variety of structures since surface measurements of a vibrating structure can provide information about the health of the internal members without costly (or impossible) dismantling of the structure. In order to develop structural health monitoring for application to operational structures, developments in four areas have been undertaken within this project: operational evaluation, diagnostic measurements, information condensation, and damage identification. The developments in each of these four aspects of structural health monitoring have been exercised on a broad range of experimental data. This experimental data has been extracted from structures from several application areas which include aging aircraft, wind energy, aging bridges, offshore structures, structural supports, and mechanical parts. As a result of these advances, Sandia National Laboratories is in a position to perform further advanced development, operational implementation, and technical consulting for a broad class of the nation`s aging infrastructure problems.

  12. Assessing hospitals' clinical risk management: Development of a monitoring instrument

    Directory of Open Access Journals (Sweden)

    Pfeiffer Yvonne

    2010-12-01

    Full Text Available Abstract Background Clinical risk management (CRM plays a crucial role in enabling hospitals to identify, contain, and manage risks related to patient safety. So far, no instruments are available to measure and monitor the level of implementation of CRM. Therefore, our objective was to develop an instrument for assessing CRM in hospitals. Methods The instrument was developed based on a literature review, which identified key elements of CRM. These elements were then discussed with a panel of patient safety experts. A theoretical model was used to describe the level to which CRM elements have been implemented within the organization. Interviews with CRM practitioners and a pilot evaluation were conducted to revise the instrument. The first nationwide application of the instrument (138 participating Swiss hospitals was complemented by in-depth interviews with 25 CRM practitioners in selected hospitals, for validation purposes. Results The monitoring instrument consists of 28 main questions organized in three sections: 1 Implementation and organizational integration of CRM, 2 Strategic objectives and operational implementation of CRM at hospital level, and 3 Overview of CRM in different services. The instrument is available in four languages (English, German, French, and Italian. It allows hospitals to gather comprehensive and systematic data on their CRM practice and to identify areas for further improvement. Conclusions We have developed an instrument for assessing development stages of CRM in hospitals that should be feasible for a continuous monitoring of developments in this important area of patient safety.

  13. Assessing hospitals' clinical risk management: Development of a monitoring instrument.

    Science.gov (United States)

    Briner, Matthias; Kessler, Oliver; Pfeiffer, Yvonne; Wehner, Theo; Manser, Tanja

    2010-12-13

    Clinical risk management (CRM) plays a crucial role in enabling hospitals to identify, contain, and manage risks related to patient safety. So far, no instruments are available to measure and monitor the level of implementation of CRM. Therefore, our objective was to develop an instrument for assessing CRM in hospitals. The instrument was developed based on a literature review, which identified key elements of CRM. These elements were then discussed with a panel of patient safety experts. A theoretical model was used to describe the level to which CRM elements have been implemented within the organization. Interviews with CRM practitioners and a pilot evaluation were conducted to revise the instrument. The first nationwide application of the instrument (138 participating Swiss hospitals) was complemented by in-depth interviews with 25 CRM practitioners in selected hospitals, for validation purposes. The monitoring instrument consists of 28 main questions organized in three sections: 1) Implementation and organizational integration of CRM, 2) Strategic objectives and operational implementation of CRM at hospital level, and 3) Overview of CRM in different services. The instrument is available in four languages (English, German, French, and Italian). It allows hospitals to gather comprehensive and systematic data on their CRM practice and to identify areas for further improvement. We have developed an instrument for assessing development stages of CRM in hospitals that should be feasible for a continuous monitoring of developments in this important area of patient safety.

  14. Development of a portable radon monitor for multiple applications

    International Nuclear Information System (INIS)

    Gaware, J.J.; Sahoo, B.K.; Sapra, B.K.; Mayya, Y.S.

    2012-01-01

    There is an increasing requirement of the portable online radon monitor which can be used for multiple applications in environmental studies programme. Various applications include the real time radon data generation in the uranium mine for the occupancy management of the workers, soil gas radon measurement for uranium exploration, dissolved radon measurement in bore-well water, measurement of radon emission from sources like soil, building material and residue of NORM facilities, etc. Most of the commercial instruments available today are not suitable for all the above applications due to their inherent limitations such as low sensitivity, interference from humidity and trace gases, requirement of consumable material like dryer etc. To overcome the above limitations, a special, cost effective and portable online radon monitor has been developed using the conventional ZnS(Ag) detector. The radon monitor and its various accessories for different applications have been developed and demonstrated. Some of the potential applications are (i) Online measurement of radon in air, soil and water, (ii) Measurement of radon flux from soil, (iii) Measurement of radon surface and mass exhalation rate from samples and (iv) Industrial networking in U mines. This system has been compared with commercially available units and the performance has been found to be satisfactory. This monitor will serve as an import substitute in the Indian radon research programmes and can be used for multiple applications

  15. Software development of the KSTAR Tokamak Monitoring System

    International Nuclear Information System (INIS)

    Kim, K.H.; Lee, T.G.; Baek, S.; Lee, S.I.; Chu, Y.; Kim, Y.O.; Kim, J.S.; Park, M.K.; Oh, Y.K.

    2008-01-01

    The Korea Superconducting Tokamak Advanced Research (KSTAR) project, which is constructing a superconducting Tokamak, was launched in 1996. Much progress in instrumentation and control has been made since then and the construction phase will be finished in August 2007. The Tokamak Monitoring System (TMS) measures the temperatures of the superconducting magnets, bus-lines, and structures and hence monitors the superconducting conditions during the operation of the KSTAR Tokamak. The TMS also measures the strains and displacements on the structures in order to monitor the mechanical safety. There are around 400 temperature sensors, more than 240 strain gauges, 10 displacement gauges and 10 Hall sensors. The TMS utilizes Cernox sensors for low temperature measurement and each sensor has its own characteristic curve. In addition, the TMS needs to perform complex arithmetic operations to convert the measurements into temperatures for each Cernox sensor for this large number of monitoring channels. A special software development effort was required to reduce the temperature conversion time and multi-threading to achieve the higher performance needed to handle the large number of channels. We have developed the TMS with PXI hardware and with EPICS software. We will describe the details of the implementations in this paper

  16. Development and validation of rheumatoid arthritis magnetic resonance imaging inflammation thresholds associated with lack of damage progression

    DEFF Research Database (Denmark)

    Baker, Joshua F.; Østergaard, Mikkel; Emery, Paul

    2017-01-01

    Objective To determine thresholds for rheumatoid arthritis (RA) magnetic resonance imaging scores (RAMRIS) associated with a low risk of structural damage progression. Methods MRI of the dominant hand was performed and RAMRIS scores determined at weeks 0, 24, and 52. X-rays were performed and van...

  17. Implications of lower risk thresholds for statin treatment in primary prevention: analysis of CPRD and simulation modelling of annual cholesterol monitoring.

    Science.gov (United States)

    McFadden, Emily; Stevens, Richard; Glasziou, Paul; Perera, Rafael

    2015-01-01

    To estimate numbers affected by a recent change in UK guidelines for statin use in primary prevention of cardiovascular disease. We modelled cholesterol ratio over time using a sample of 45,151 men (≥40years) and 36,168 women (≥55years) in 2006, without statin treatment or previous cardiovascular disease, from the Clinical Practice Research Datalink. Using simulation methods, we estimated numbers indicated for new statin treatment, if cholesterol was measured annually and used in the QRISK2 CVD risk calculator, using the previous 20% and newly recommended 10% thresholds. We estimate that 58% of men and 55% of women would be indicated for treatment by five years and 71% of men and 73% of women by ten years using the 20% threshold. Using the proposed threshold of 10%, 84% of men and 90% of women would be indicated for treatment by 5years and 92% of men and 98% of women by ten years. The proposed change of risk threshold from 20% to 10% would result in the substantial majority of those recommended for cholesterol testing being indicated for statin treatment. Implications depend on the value of statins in those at low to medium risk, and whether there are harms. Copyright © 2014. Published by Elsevier Inc.

  18. Development of dielectric sensor to monitor the engine lubricating oil degradation

    Directory of Open Access Journals (Sweden)

    Balashanmugam Vasanthan

    2016-01-01

    Full Text Available Present day practice of following fixed schedules of oil change intervals could result in loss for the equipment owner, as the oil is not utilized up-to its maximum useful life. Similarly, the extended use of engine oil beyond maximum useful life is of high risk, which could lead irreversible and catastrophic damages to engine parts. Engine oil condition indicates the condition of engine parts, in any application. Therefore, monitoring the condition of the oil in real time is of paramount importance. Researchers had established that the engine oil degradation correlates with change in dielectric property of the engine oil. The important factor to realize the on-line real time monitoring of the changes in dielectric property of the engine oil is, the cost of dielectric sensor within affordable limit for an operator. Current work aims at developing such a low cost affordable dielectric sensor and engine oil samples (SAE 15W40 grade were collected from durability test engines used in engine test rig and on-road vehicles. These samples were tested for physical and chemical properties. Any changes in the properties, of engine oil monitored, indicate that it undergoes degradation due to usage. A prototype of capacitive type sensor was developed and validated with reference fluids. The dielectric values measured using proto type sensor in the used oil samples show a correlation with change in physical properties. This trend and thresholds of dielectric provides effective plat form to monitor the engine oil degradation. The sensor could be coupled to a suitable warning device by incorporating specific algorithms.

  19. Development of remote monitoring for unattended mode NDA in PFPF

    International Nuclear Information System (INIS)

    Maruyama, Hajime; Asano, Takashi; Takahashi, Saburou; Namekawa, Masaru; Abhold, M.E.; Harker, W.C.; Buck, S.E.; Sweet, M.R.

    1999-01-01

    Remote transmission of safeguards data has been identified in Program 93+2 as a possible development area that could improve the efficiency of safeguards. Japan Nuclear Cycle Development Institute (JNC) has developed various kinds of unattended mode Nondestructive Assay (NDA) systems in the Plutonium Fuel Production Facility (PFPF) since 1989 in cooperation with Los Alamos National Laboratory (LANL) for international safeguards. JNC and LANL have initiated the development of a remote monitoring system for unattended mode NDA at PFPF in 1997 in a joint study program in order to demonstrate hardware and software functionality and procedures for remote transmission of NDA data. In November 1997, the Phase I system demonstrated the capability for data transmission, authentication and encryption using simulated NDA data. In June 1999, the Phase II system was introduced into the plutonium storage area in PFPF, and demonstration of hardware and software was carried out by using actual NDA data. Now, the field trial of this system is being carried out in order to demonstrate and consider how much efficiency and effectiveness was obtained through implementation of the remote monitoring system. This paper describes the outline of the Phase I and II remote monitoring system and future plans. (author)

  20. Final Technical Report: Development of Post-Installation Monitoring Capabilities

    Energy Technology Data Exchange (ETDEWEB)

    Polagye, Brian [University of Washington

    2014-03-31

    The development of approaches to harness marine and hydrokinetic energy at large-scale is predicated on the compatibility of these generation technologies with the marine environment. At present, aspects of this compatibility are uncertain. Demonstration projects provide an opportunity to address these uncertainties in a way that moves the entire industry forward. However, the monitoring capabilities to realize these advances are often under-developed in comparison to the marine and hydrokinetic energy technologies being studied. Public Utility District No. 1 of Snohomish County has proposed to deploy two 6-meter diameter tidal turbines manufactured by OpenHydro in northern Admiralty Inlet, Puget Sound, Washington. The goal of this deployment is to provide information about the environmental, technical, and economic performance of such turbines that can advance the development of larger-scale tidal energy projects, both in the United States and internationally. The objective of this particular project was to develop environmental monitoring plans in collaboration with resource agencies, while simultaneously advancing the capabilities of monitoring technologies to the point that they could be realistically implemented as part of these plans. In this, the District was joined by researchers at the Northwest National Marine Renewable Energy Center at the University of Washington, Sea Mammal Research Unit, LLC, H.T. Harvey & Associates, and Pacific Northwest National Laboratory. Over a two year period, the project team successfully developed four environmental monitoring and mitigation plans that were adopted as a condition of the operating license for the demonstration project that issued by the Federal Energy Regulatory Commission in March 2014. These plans address nearturbine interactions with marine animals, the sound produced by the turbines, marine mammal behavioral changes associated with the turbines, and changes to benthic habitat associated with colonization

  1. PHEBUS on-line aerosol monitor development test program

    International Nuclear Information System (INIS)

    Sprenger, M.H.; Pentecost, C.G.

    1992-03-01

    EG ampersand G Idaho, Inc. developed an on-line aerosol monitor (OLAM) for the French PHEBUS Fission Product Project. Part of the development was to manufacture and test an OLAM prototype. This report presents the results of the testing which determined the mechanical integrity of the monitor at operating temperature and pressure and performed a preliminary test of the optical system. A series of twenty different tests was conducted during the prototype testing sequence. Since no leaks were detected, the OLAM demonstrated that it could provide a pressure boundary at required test conditions. The optical and electrical system also proved its integrity by exceeding the design requirement of less than 105 optical signal drift during an actual two-hour test sequence

  2. Development of a real time chemistry monitoring and diagnostic system

    International Nuclear Information System (INIS)

    Gaudreau, T.M.; Millett, P.J.; Bates, J.; Burns, G.

    1998-01-01

    EPRI has developed SMART chem WORKS, which is capable of operating as a real time chemistry diagnostic and monitoring system. A high degree of plant-specific customization is possible which allows discrimination between normal chemistry and off-normal conditions. The initial implementation of the system has been very successful. State of the art technology has been employed which allows remote administration of the system, a flexible, web page display of the output from the system and instant notification of excursions using email and pagers. The second installation of SMART chem WORKS is currently underway at a BWR plant, Grand Gulf. The SMART chem WORKS techniques can be applied to monitor PWR Primary Chemistry, PWR Secondary Chemistry and BWR steam cycle chemistry. A fossil steam cycle simulator will also be developed for application to fossil plants. (J.P.N.)

  3. Prairie Monitoring Protocol Development: North Coast and Cascades Network

    Science.gov (United States)

    McCoy, Allen; Dalby, Craig

    2009-01-01

    The purpose of the project was to conduct research that will guide development of a standard approach to monitoring several components of prairies within the North Coast and Cascades Network (NCCN) parks. Prairies are an important element of the natural environment at many parks, including San Juan Island National Historical Park (NHP) and Ebey's Landing National Historical Reserve (NHR). Forests have been encroaching on these prairies for many years, and so monitoring of the prairies is an important resource issue. This project specifically focused on San Juan Island NHP. Prairies at Ebey's Landing NHR will be monitored in the future, but that park was not mapped as part of this prototype project. In the interest of efficiency, the Network decided to investigate two main issues before launching a full protocol development effort: (1) the imagery requirements for monitoring prairie components, and (2) the effectiveness of software to assist in extracting features from the imagery. Several components of prairie monitoring were initially identified as being easily tracked using aerial imagery. These components included prairie/forest edge, broad prairie composition (for example, shrubs, scattered trees), and internal exclusions (for example, shrubs, bare ground). In addition, we believed that it might be possible to distinguish different grasses in the prairies if the imagery were of high enough resolution. Although the areas in question at San Juan Island NHP are small enough that mapping on the ground with GPS (Global Positioning System) would be feasible, other applications could benefit from aerial image acquisition on a regular, recurring basis and thereby make the investment in aerial imagery worthwhile. The additional expense of orthorectifying the imagery also was determined to be cost-effective.

  4. Development of an indicator to monitor mediterranean wetlands.

    Science.gov (United States)

    Sanchez, Antonio; Abdul Malak, Dania; Guelmami, Anis; Perennou, Christian

    2015-01-01

    Wetlands are sensitive ecosystems that are increasingly subjected to threats from anthropogenic factors. In the last decades, coastal Mediterranean wetlands have been suffering considerable pressures from land use change, intensification of urban growth, increasing tourism infrastructure and intensification of agricultural practices. Remote sensing (RS) and Geographic Information Systems (GIS) techniques are efficient tools that can support monitoring Mediterranean coastal wetlands on large scales and over long periods of time. The study aims at developing a wetland indicator to support monitoring Mediterranean coastal wetlands using these techniques. The indicator makes use of multi-temporal Landsat images, land use reference layers, a 50m numerical model of the territory (NMT) and Corine Land Cover (CLC) for the identification and mapping of wetlands. The approach combines supervised image classification techniques making use of vegetation indices and decision tree analysis to identify the surface covered by wetlands at a given date. A validation process is put in place to compare outcomes with existing local wetland inventories to check the results reliability. The indicator´s results demonstrate an improvement in the level of precision of change detection methods achieved by traditional tools providing reliability up to 95% in main wetland areas. The results confirm that the use of RS techniques improves the precision of wetland detection compared to the use of CLC for wetland monitoring and stress the strong relation between the level of wetland detection and the nature of the wetland areas and the monitoring scale considered.

  5. Second threshold in weak interactions

    NARCIS (Netherlands)

    Veltman, M.J.G.

    1977-01-01

    The point of view that weak interactions must have a second threshold below 300 – 600 GeV is developed. Above this threshold new physics must come in. This new physics may be the Higgs system, or some other nonperturbative system possibly having some similarities to the Higgs system. The limit of

  6. Instrumental monitoring of lahars for warning purposes: new developments along the Colima Volcano, Mexico

    Science.gov (United States)

    Coviello, Velio; Capra, Lucia; Vázquez, Rosario; Márquez, Víctor H.; Cruz, Sergio

    2017-04-01

    Early Warning Systems (EWSs) for rapid flow-like landslides can be classified into two main types: advance- and event-systems. Advance EWSs predict the flow occurrence by monitoring the parameters that may lead to initiation conditions, typically rainfall. This kind of EWSs are prone to a high number of false alarms because they are strongly affected by uncertainties in both precipitation measurements and in the estimate of rainfall thresholds. Event EWSs are based on the instrumental detection of the flow when it is already in progress. Those systems can be particularly effective to protect vulnerable infrastructures such as communication routes that do not require an excessively long alert time. However, having a much smaller lead time than advance-systems, their effectiveness strictly depends on the possibility to perform accurate and rapid measurements and to automatically process, store and validate monitoring data, that is to integrate an effective warning algorithm. In mountainous regions, several instrumented catchments exist where debris flow monitoring is performed using stage sensors, video cameras, and ground vibration detectors (GVDs). For early warning purpose, the possibility to detect debris flows from a distance is an important advantage of GVDs. In addition, most monitoring devices need to be installed in the channel bed or very close to it, with consequent great danger to be destructed. Consequently, a growing number of monitoring systems of active basins integrate a linear array of GVDs distributed along the channel, in safe locations. A debris flow warning algorithm based on geophone data was recently developed and implemented in the Gadria testing field for EWSs, Northeastern Italian Alps. This algorithm uses the Signal-to-Noise Ratio (SNR) as warning parameter instead of a classical intensity/duration threshold. The event detection algorithm adopts a non-simultaneous triggering condition requiring that at least two geophones trigger in order

  7. Development of a Computerized Adverse Drug Event (ADE) Monitor in the Outpatient Setting

    National Research Council Canada - National Science Library

    Seger, Andrew C; Gandhi, Tejal K; Hope, Carol; Overhage, J. M; Murray, Michael D; Weber, David; Fiskio, Julie; Teal, Evgenia; Bates, David W

    2005-01-01

    ...) monitor using electronic medical records from outpatient practices. We describe the steps involved in ADE monitor development and rule validation at large outpatient practices at Boston and Indianapolis...

  8. The development of direct core monitoring in Nuclear Electric plc

    International Nuclear Information System (INIS)

    Curtis, R.F.; Jones, S. Reed, J.; Wickham, A.J.

    1996-01-01

    Monitoring of graphite behaviour in Nuclear Electric Magnox and AGR reactors is necessary to support operating safety cases and to ensure that reactor operation is optimized to sustain the necessary core integrity for the economic life of the reactors. The monitoring programme combines studies for pre-characterized ''installed'' samples with studies on samples trepanned from within the cores and also with studies of core and channel geometry using specially designed equipment. Nuclear Electric has two trepanning machines originally designed for Magnox-reactor work which have been used for a substantial programme over many years. They have recently been upgraded to improve sampling speed, safety and versatility - the last being demonstrated by their adaptation for a recently-won contract associated with decommissioning the Windscale piles. Radiological hazards perceived when the AGR trepanning system was designed resulted in very cumbersome equipment. This has worked well but has been inconvenient in operation. The development of a smaller and improved system for deploying the equipment is now reported. Channel dimension monitoring equipment is discussed in detail with examples of data recovered from both Magnox and AGR cores. A resolution of ± 2 of arc (tilt) and ± 0.01 mm change in diameter in attainable. It is also theoretically possible to establish brick stresses by measuring geometry changes which result from trepanning. Current development work on a revolving scanning laser rangefinder which will enable the measurement of diameters to a resolution of 0.001 mm will also be discussed. This paper also discusses non-destructive techniques for crack detection employing ultrasound or resistance networks, the use of special manipulators to deliver inspection and repair equipment and recent developments to install displacement monitors in peripheral regions of the cores, to aid the understanding of the interaction of the restraint system with the core - the region

  9. Development of RIA kits for tumor-markers monitoring

    International Nuclear Information System (INIS)

    Suprarop, P.

    1997-01-01

    All reagents for tumor markers assays are imported from various manufacturers mainly CIS bio international. The average cost of these reagents is ranged from 80-150 bath/test (2-4 dollars test). The screening test for cancers could not be done especially in other regions of Thailand whose budgets and resources are so limited. If the reagents are made locally, many laboratories can perform the tests and use as primary diagnosis, screening or monitor the course of the disease following treatment. In addition, these reagents could help clinicians and give complementary information on the tumor status to improve quality of life in Thailand. Research objectives include: 1. Development of IRMA reagent kits suitable for diagnosing staging and monitoring prostrate and breast cancer. 2. Transfer of technology and reagent kits to relevant laboratories in Thailand. 3. Routine distribution of the reagents kits to the end users

  10. Development of intelligent monitoring purifier for indoor PM 2.5

    Science.gov (United States)

    Lou, Guanting; Zhu, Rong; Guo, Jiangwei; Wei, Yongqing

    2018-03-01

    The particulate matter 2.5 (PM2.5) refers to tiny particles or droplets in the air that are two and one half microns or less in width. PM2.5 is an air pollutant that is a concern for people’s health when levels in air are high. The intelligent monitoring purifier was developed to detect indoor PM2.5 concentration before and after purification and the monitoring data could be displayed on the LCD screen, displaying different color patterns according to the concentrations. Through the Bluetooth transport module, real-time values could also display on the mobile phone and voice broadcast PM2.5 concentration level in the air. When PM2.5 concentration is higher than the setting threshold, the convection fan rotation and the speed can be remote controlled with mobile phone through the Bluetooth transport. Therefore, the efficiency and scope of the purification could be enhanced and further better air quality could be achieved.

  11. Nonparametric Integrated Agrometeorological Drought Monitoring: Model Development and Application

    Science.gov (United States)

    Zhang, Qiang; Li, Qin; Singh, Vijay P.; Shi, Peijun; Huang, Qingzhong; Sun, Peng

    2018-01-01

    Drought is a major natural hazard that has massive impacts on the society. How to monitor drought is critical for its mitigation and early warning. This study proposed a modified version of the multivariate standardized drought index (MSDI) based on precipitation, evapotranspiration, and soil moisture, i.e., modified multivariate standardized drought index (MMSDI). This study also used nonparametric joint probability distribution analysis. Comparisons were done between standardized precipitation evapotranspiration index (SPEI), standardized soil moisture index (SSMI), MSDI, and MMSDI, and real-world observed drought regimes. Results indicated that MMSDI detected droughts that SPEI and/or SSMI failed to do. Also, MMSDI detected almost all droughts that were identified by SPEI and SSMI. Further, droughts detected by MMSDI were similar to real-world observed droughts in terms of drought intensity and drought-affected area. When compared to MMSDI, MSDI has the potential to overestimate drought intensity and drought-affected area across China, which should be attributed to exclusion of the evapotranspiration components from estimation of drought intensity. Therefore, MMSDI is proposed for drought monitoring that can detect agrometeorological droughts. Results of this study provide a framework for integrated drought monitoring in other regions of the world and can help to develop drought mitigation.

  12. Development of on-line laser power monitoring system

    Science.gov (United States)

    Ding, Chien-Fang; Lee, Meng-Shiou; Li, Kuan-Ming

    2016-03-01

    Since the laser was invented, laser has been applied in many fields such as material processing, communication, measurement, biomedical engineering, defense industries and etc. Laser power is an important parameter in laser material processing, i.e. laser cutting, and laser drilling. However, the laser power is easily affected by the environment temperature, we tend to monitor the laser power status, ensuring there is an effective material processing. Besides, the response time of current laser power meters is too long, they cannot measure laser power accurately in a short time. To be more precisely, we can know the status of laser power and help us to achieve an effective material processing at the same time. To monitor the laser power, this study utilize a CMOS (Complementary metal-oxide-semiconductor) camera to develop an on-line laser power monitoring system. The CMOS camera captures images of incident laser beam after it is split and attenuated by beam splitter and neutral density filter. By comparing the average brightness of the beam spots and measurement results from laser power meter, laser power can be estimated. Under continuous measuring mode, the average measuring error is about 3%, and the response time is at least 3.6 second shorter than thermopile power meters; under trigger measuring mode which enables the CMOS camera to synchronize with intermittent laser output, the average measuring error is less than 3%, and the shortest response time is 20 millisecond.

  13. Development of Cloud-Based UAV Monitoring and Management System

    Directory of Open Access Journals (Sweden)

    Mason Itkin

    2016-11-01

    Full Text Available Unmanned aerial vehicles (UAVs are an emerging technology with the potential to revolutionize commercial industries and the public domain outside of the military. UAVs would be able to speed up rescue and recovery operations from natural disasters and can be used for autonomous delivery systems (e.g., Amazon Prime Air. An increase in the number of active UAV systems in dense urban areas is attributed to an influx of UAV hobbyists and commercial multi-UAV systems. As airspace for UAV flight becomes more limited, it is important to monitor and manage many UAV systems using modern collision avoidance techniques. In this paper, we propose a cloud-based web application that provides real-time flight monitoring and management for UAVs. For each connected UAV, detailed UAV sensor readings from the accelerometer, GPS sensor, ultrasonic sensor and visual position cameras are provided along with status reports from the smaller internal components of UAVs (i.e., motor and battery. The dynamic map overlay visualizes active flight paths and current UAV locations, allowing the user to monitor all aircrafts easily. Our system detects and prevents potential collisions by automatically adjusting UAV flight paths and then alerting users to the change. We develop our proposed system and demonstrate its feasibility and performances through simulation.

  14. Development of Cloud-Based UAV Monitoring and Management System.

    Science.gov (United States)

    Itkin, Mason; Kim, Mihui; Park, Younghee

    2016-11-15

    Unmanned aerial vehicles (UAVs) are an emerging technology with the potential to revolutionize commercial industries and the public domain outside of the military. UAVs would be able to speed up rescue and recovery operations from natural disasters and can be used for autonomous delivery systems (e.g., Amazon Prime Air). An increase in the number of active UAV systems in dense urban areas is attributed to an influx of UAV hobbyists and commercial multi-UAV systems. As airspace for UAV flight becomes more limited, it is important to monitor and manage many UAV systems using modern collision avoidance techniques. In this paper, we propose a cloud-based web application that provides real-time flight monitoring and management for UAVs. For each connected UAV, detailed UAV sensor readings from the accelerometer, GPS sensor, ultrasonic sensor and visual position cameras are provided along with status reports from the smaller internal components of UAVs (i.e., motor and battery). The dynamic map overlay visualizes active flight paths and current UAV locations, allowing the user to monitor all aircrafts easily. Our system detects and prevents potential collisions by automatically adjusting UAV flight paths and then alerting users to the change. We develop our proposed system and demonstrate its feasibility and performances through simulation.

  15. Development of Cloud-Based UAV Monitoring and Management System

    Science.gov (United States)

    Itkin, Mason; Kim, Mihui; Park, Younghee

    2016-01-01

    Unmanned aerial vehicles (UAVs) are an emerging technology with the potential to revolutionize commercial industries and the public domain outside of the military. UAVs would be able to speed up rescue and recovery operations from natural disasters and can be used for autonomous delivery systems (e.g., Amazon Prime Air). An increase in the number of active UAV systems in dense urban areas is attributed to an influx of UAV hobbyists and commercial multi-UAV systems. As airspace for UAV flight becomes more limited, it is important to monitor and manage many UAV systems using modern collision avoidance techniques. In this paper, we propose a cloud-based web application that provides real-time flight monitoring and management for UAVs. For each connected UAV, detailed UAV sensor readings from the accelerometer, GPS sensor, ultrasonic sensor and visual position cameras are provided along with status reports from the smaller internal components of UAVs (i.e., motor and battery). The dynamic map overlay visualizes active flight paths and current UAV locations, allowing the user to monitor all aircrafts easily. Our system detects and prevents potential collisions by automatically adjusting UAV flight paths and then alerting users to the change. We develop our proposed system and demonstrate its feasibility and performances through simulation. PMID:27854267

  16. Development of Web based system for individual internal monitoring programme

    International Nuclear Information System (INIS)

    Lima, Vanessa Rogeria de

    2007-01-01

    The purposes of the internal monitoring, in general, are to verify and document that each worker is protected adequately against risks from radionuclide intakes and the protection complies with legal requirements. Therefore, an overall radiation protection programme, starts with an assessment to identify work situations in which there is a risk of internal contamination of workers and to quantify the likely intake of radioactive material and the resulting committed effective dose. As a part of a continuous improvement of the monitoring programme for occupationally exposed workers at IPEN, it is being developed a Web based system to access the internal dosimetry database. The system was implemented using Hypertext Preprocessor, PHP, and a PostgreSQL database. This system will introduce a new paradigm in the routine of the internal dosimetry service, providing a fast access to the information among the measurement laboratories staff, dose evaluation group and the radiation protection supervisor. The database maintains information about worker identification, physical and chemical characteristics of the radionuclide, type of monitoring, measurement data and the dose. Moreover, this information will be readily available to provide support for regulatory compliance and quality control requirements. (author)

  17. Development of autonomous gamma dose logger for environmental monitoring.

    Science.gov (United States)

    Jisha, N V; Krishnakumar, D N; Surya Prakash, G; Kumari, Anju; Baskaran, R; Venkatraman, B

    2012-03-01

    Continuous monitoring and archiving of background radiation levels in and around the nuclear installation is essential and the data would be of immense use during analysis of any untoward incidents. A portable Geiger Muller detector based autonomous gamma dose logger (AGDL) for environmental monitoring is indigenously designed and developed. The system operations are controlled by microcontroller (AT89S52) and the main features of the system are software data acquisition, real time LCD display of radiation level, data archiving at removable compact flash card. The complete system operates on 12 V battery backed up by solar panel and hence the system is totally portable and ideal for field use. The system has been calibrated with Co-60 source (8.1 MBq) at various source-detector distances. The system is field tested and performance evaluation is carried out. This paper covers the design considerations of the hardware, software architecture of the system along with details of the front-end operation of the autonomous gamma dose logger and the data file formats. The data gathered during field testing and inter comparison with GammaTRACER are also presented in the paper. AGDL has shown excellent correlation with energy fluence monitor tuned to identify (41)Ar, proving its utility for real-time plume tracking and source term estimation.

  18. Monitoring Water Targets in the Post-2015 Development Goals

    Science.gov (United States)

    Lawford, R. G.

    2015-12-01

    The Water Sustainable Development Goal (SDG) provides a comprehensive approach to developing water services in a way that ensures social equity, health, well-being and sustainability for all. In particular, the water goal includes targets related to sanitation, wastewater, water quality, water efficiency, integrated water management and ecosystems (details to be finalized in September 2015). As part of its implementation, methods to monitor target indicators must be developed. National governments will be responsible for reporting on progress toward these targets using national data sets and possibly information from global data sets that applies to their countries. Oversight of this process through the use of global data sets is desirable for encouraging the use of standardized information for comparison purposes. Disparities in monitoring due to very sparse data networks in some countries can be addressed by using geospatially consistent data products from space-based remote sensing. However, to fully exploit these data, capabilities will be needed to downscale information, to interpolate and assimilate data both in time and space, and to integrate these data with socio-economic data sets, model outputs and survey data in a geographical information system framework. Citizen data and other non-standard data types may also supplement national data systems. A comprehensive and integrated analysis and dissemination system is needed to enable the important contributions that satellites could make to achieving Water SDG targets. This presentation will outline the progress made in assessing the needs for information to track progress on the Water SDG, options for meeting these needs using existing data infrastructure, and pathways for expanding the role of Earth observations in SDG monitoring. It will also discuss the potential roles of Future Earth's Sustainable Water Futures Programme (SWFP) and the Group on Earth Observations (GEO) in coordinating these efforts.

  19. Development and evaluation of an instantaneous atmospheric corrosion rate monitor

    Science.gov (United States)

    Mansfeld, F.; Jeanjaquet, S. L.; Kendig, M. W.; Roe, D. K.

    1985-06-01

    A research program was carried out in which a new instantaneous atmospheric corrosion rate monitor (ACRM) was developed and evaluated, and equipment was constructed which will allow the use of many sensors in an economical way in outdoor exposures. In the first task, the ACRM was developed and tested in flow chambers in which relative humidity and gaseous and particulate pollutant levels can be controlled. Diurnal cycles and periods of rain were simulated. The effects of aerosols were studied. A computerized system was used for collection, storage, and analysis of the electrochemical data. In the second task, a relatively inexpensive electronics system for control of the ACRM and measurement of atmospheric corrosion rates was designed and built. In the third task, calibration of deterioration rates of various metallic and nonmetallic materials with the response of the ACRMs attached to these materials was carried out under controlled environmental conditions using the system developed in the second task. A Quality Assurance project plan was prepared with inputs from the Rockwell International Environmental Monitoring and Service Center and Quality Assurance System audits were performed.

  20. Development and application of the San Onofre safety monitor

    International Nuclear Information System (INIS)

    Hook, Thomas G.; Lee, Roger J.; Morgan, Thomas A.

    2004-01-01

    Halliburton NUS Corporation (NUS) has developed a risk-based configuration management software tool for use at Southern California Edison's San Onofre Nuclear Generating Station. The software, called the Safety Monitor, calculates an estimate of current plant core damage risk based upon the plant's current operating configuration (e.g., equipment operability, system operating alignments). All data is entered and displayed in a format easily understood by plant personnel. The plant hopes to use this tool to ensure that risk is minimized during plant operations and to identify situations in which current Technical Specifications can be optimized. Plant configuration data and out-of-service time data is also automatically collected. (author)

  1. Development and Comparison of Technical Solutions for Electricity Monitoring Equipment

    Directory of Open Access Journals (Sweden)

    Potapovs A.

    2017-12-01

    Full Text Available The paper focuses on the elaboration of a demand-side management platform for optimal energy management strategies; the topicality is related to the description and comparison of the developed electricity monitoring and control equipment. The article describes two versions based on Atmega328 and STM32 microcontrollers, a lower and higher level of precision, and other distinct performance parameters. At the end of the article, the results of the testing of the two types of equipment are given and their comparison is made.

  2. Development of intergrated accident management assessment technology; development of interface modules of risk-monitoring system

    Energy Technology Data Exchange (ETDEWEB)

    Kang, S. K.; Park, S. K.; Seok, H.; Kim, D. K.; Han, J. K.; Park, B. R. [KOPEC, Taejeon (Korea)

    2002-03-01

    Based on the development of interface modules with FORTE.- DynaRM can quantify risk model very fast (Very frequent risk model quantification is needed for configuration risk management).- risk monitoring system technology transfer to foreign NPPs. Contribution to component failure and maintenance control automation with the development of Tagging control System. On-Line risk monitoring system development by joint team between Korea Atomic Energy Research Institute and KOPEC is a request by KEPCO. The softwares developed in this study is easily implemented at domestic NPPs without extra study or cost. Economic benefit and Software export to foreign NPPs are expected because of the development of technology related to risk monitoring system and its management. 6 refs., 3 figs., 1 tab. (Author)

  3. Optimizing Systems of Threshold Detection Sensors

    National Research Council Canada - National Science Library

    Banschbach, David C

    2008-01-01

    .... Below the threshold all signals are ignored. We develop a mathematical model for setting individual sensor thresholds to obtain optimal probability of detecting a significant event, given a limit on the total number of false positives allowed...

  4. Improvement of bioprocess monitoring: development of novel concepts

    Directory of Open Access Journals (Sweden)

    Bayer Karl

    2006-05-01

    Full Text Available Abstract The advancement of bioprocess monitoring will play a crucial role to meet the future requirements of bioprocess technology. Major issues are the acceleration of process development to reduce the time to the market and to ensure optimal exploitation of the cell factory and further to cope with the requirements of the Process Analytical Technology initiative. Due to the enormous complexity of cellular systems and lack of appropriate sensor systems microbial production processes are still poorly understood. This holds generally true for the most microbial production processes, in particular for the recombinant protein production due to strong interaction between recombinant gene expression and host cell metabolism. Therefore, it is necessary to scrutinise the role of the different cellular compartments in the biosynthesis process in order to develop comprehensive process monitoring concepts by involving the most significant process variables and their interconnections. Although research for the development of novel sensor systems is progressing their applicability in bioprocessing is very limited with respect to on-line and in-situ measurement due to specific requirements of aseptic conditions, high number of analytes, drift, and often rather low physiological relevance. A comprehensive survey of the state of the art of bioprocess monitoring reveals that only a limited number of metabolic variables show a close correlation to the currently explored chemical/physical principles. In order to circumvent this unsatisfying situation mathematical methods are applied to uncover "hidden" information contained in the on-line data and thereby creating correlations to the multitude of highly specific biochemical off-line data. Modelling enables the continuous prediction of otherwise discrete off-line data whereby critical process states can be more easily detected. The challenging issue of this concept is to establish significant on-line and off

  5. Nuclear Explosion Monitoring Research and Development in the Middle East

    Science.gov (United States)

    Pasyanos, M. E.; Walter, W. R.; Myers, S. C.; Matzel, E.; Gok, R.; Simmons, N. A.; Ford, S. R.; Rodgers, A. J.; Ruppert, S.; Hauk, T. F.; Dodge, D.; Ganzberger, M.; Ramirez, A. L.; Ryall, F.

    2010-12-01

    Lawrence Livermore National Laboratory has a long-standing research and development program for nuclear explosion monitoring. Here, we cover aspects of recent work applied to the Middle East region, specifically data management, seismic location, event identification, and magnitude estimation. Seismic data from broadband stations in the region is available through a combination of expanding global networks, improved and increasingly available national networks, and temporary deployments. Managing the huge amounts of data necessary to perform the work is an underappreciated aspect of monitoring research. Our research database provides vertically-integrated management of seismic data, catalogs, picks, magnitudes, etc., as well as analysis tools that are fully integrated into the database. Seismic locations have improved significantly through a succession of models starting with empirical corrections to 1-D models, progressing through to 2 1/2 -D models which significantly improve regional body-wave travel times by characterizing the upper mantle as a gradient, and on through high-resolution fully 3-D models that are currently in development. Our surface wave tomography results provide additional constraints on Earth lithospheric structure and can be used to improve Ms determination. Event identification has been achieved through a number of methods including the traditional mb:Ms discriminant, regional high-frequency P/S discriminants, and analysis of the complete moment tensor solution, which also has the possibility of distinguishing between explosions and mining-type events. Optimal use of these methods requires calibration, such as the multi-phase attenuation model of the crust and upper mantle that has been developed for the region. Use of the models reduces scatter of the earthquake population and reduces misclassification. Another important aspect of explosion monitoring is getting robust estimates of event magnitude, and hence explosive yield. This has been

  6. Design and development of portable continuous beta air monitor

    International Nuclear Information System (INIS)

    Pankaj Kumar; Pandey, J.P.N.; Jaroli, Manish; Dubey, K.

    2014-01-01

    Most of Continuous air monitors used for the measurement of air borne activity at nuclear plants are bulky in size, makes lot of noise (> 70 DB) due to belt derive vacuum pump. In addition to that users also face difficulties in displacement of the instrument from one location to another location. To overcome these problems, a compact and portable continuous Beta air monitor was indigenously designed and developed which has extremely low noise level and has shown excellent performance for the measurement of air borne activity. The details of the design and development of portable continuous beta air monitor are presented in this paper. Compact design makes the instrument light in weight and easy to displace it from one location to another location. Shielding design of the detector and filter holder assembly is very effective to reduce the interference of external gamma. Replacement of filter papers in this design of filter holder is much easier and convenient than old model filter holders. The integrity of leak tightness of the system ensures collection efficiency more than 99 % for sub micron particles. Observed efficiency of the detector with 5 mm minimum air gap between filter paper and detector is 13% which is 1.5 times higher than earlier model. Use of motor mounted vacuum pump and silencer was found quite effective to reduce the noise level upto 70 DB. Introduction of electronic air flow sensor provides additional features to get flow rate at the time of individual alarm conditions. Self diagnostic features like detector fail, HV fail and pump fail indications on display system helps to identify the specific type of faults. Internal memory of display unit can store all such data with date and time in programmable intervals (0-250 minutes)

  7. Development of infrared spectroscopy techniques for environmental monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Sandsten, Jonas

    2000-08-01

    Infrared spectroscopy techniques have long been utilized in identifying and quantifying species of interest to us. Many of the elementary molecules in the atmosphere interact with infrared radiation through their ability to absorb and emit energy in vibrational and rotational transitions. A large variety of methods for monitoring of molecules and aerosol particles by collecting samples or by using remote sensing methods are available. The objective of the work presented in this thesis was to develop infrared spectroscopic techniques to further enhance the amount of useful information obtained from gathering spectral data. A new method for visualization and quantification of gas flows based on gas-correlation techniques was developed. Real-time imaging of gas leaks and incomplete or erratic flare combustion of ethene was demonstrated. The method relies on the thermal background as a radiation source and the gas can be visualized in absorption or in emission depending on the temperature difference. Diode laser spectroscopy was utilized to monitor three molecular species at the same time and over the same path. Two near-infrared diode lasers beams were combined in a periodically poled lithium niobate crystal and by difference-frequency generation a third beam was created, enabling simultaneous monitoring of oxygen, water vapor and methane. Models of aerosol particle cross sections were used to simulate the diffraction pattern of light scattered by fibers, spherical particles and real particles, such as pollen, through a new aerosol particle sensing prototype. The instrument, using a coupled cavity diode laser, has been designed with a ray-tracing program and the final prototype was employed for single aerosol particle sizing and identification.

  8. Development of a real-time bridge structural monitoring and warning system: a case study in Thailand

    Science.gov (United States)

    Khemapech, I.; Sansrimahachai, W.; Toachoodee, M.

    2017-04-01

    Regarded as one of the physical aspects under societal and civil development and evolution, engineering structure is required to support growth of the nation. It also impacts life quality and safety of the civilian. Despite of its own weight (dead load) and live load, structural members are also significantly affected by disaster and environment. Proper inspection and detection are thus crucial both during regular and unsafe events. An Enhanced Structural Health Monitoring System Using Stream Processing and Artificial Neural Network Techniques (SPANNeT) has been developed and is described in this paper. SPANNeT applies wireless sensor network, real-time data stream processing and artificial neural network based upon the measured bending strains. Major contributions include an effective, accurate and energy-aware data communication and damage detection of the engineering structure. Strain thresholds have been defined according to computer simulation results and the AASHTO (American Association of State Highway and Transportation Officials) LRFD (Load and Resistance Factor Design) Bridge Design specifications for launching several warning levels. SPANNeT has been tested and evaluated by means of computer-based simulation and on-site levels. According to the measurements, the observed maximum values are 25 to 30 microstrains during normal operation. The given protocol provided at least 90% of data communication reliability. SPANNeT is capable of real-time data report, monitoring and warning efficiently conforming to the predefined thresholds which can be adjusted regarding user's requirements and structural engineering characteristics.

  9. New Developments in Web Based Monitoring at the CMS Experiment

    International Nuclear Information System (INIS)

    Badgett, William; Lopez-Perez, Juan Antonio; Maeshima, Kaori; Maruyama, Sho; Soha, Aron; Sulmanas, Balys; Wan, Zongru; Chakaberia, Irakli

    2012-01-01

    The rate of performance improvements of the LHC at CERN has had a strong influence on the characteristics of the monitoring tools developed for the experiments. We present some of the latest additions to the suite of Web Based Monitoring services for the CMS experiment, and explore the aspects that address the roughly 20-fold increase in peak instantaneous luminosity over the course of 2011. One of these user-friendly tools allows collaborators to easily view, and make correlations among, accelerator configuration information such as bunch patterns, measured quantities such as intensities, vacuum pressures, and background conditions, as well as derived quantities such as luminosity and the number of simultaneous interactions per beam crossing. An additional tool summarizes the daily, weekly, and yearly luminosity and efficiency. Finally, we discuss a trigger cross section and rate fitting service that uses data from previous runs to validate current running conditions, as well as to serve as a predictive extrapolation tool for developing triggers for higher luminosity running.

  10. Development of anomaly detection models for deep subsurface monitoring

    Science.gov (United States)

    Sun, A. Y.

    2017-12-01

    Deep subsurface repositories are used for waste disposal and carbon sequestration. Monitoring deep subsurface repositories for potential anomalies is challenging, not only because the number of sensor networks and the quality of data are often limited, but also because of the lack of labeled data needed to train and validate machine learning (ML) algorithms. Although physical simulation models may be applied to predict anomalies (or the system's nominal state for that sake), the accuracy of such predictions may be limited by inherent conceptual and parameter uncertainties. The main objective of this study was to demonstrate the potential of data-driven models for leakage detection in carbon sequestration repositories. Monitoring data collected during an artificial CO2 release test at a carbon sequestration repository were used, which include both scalar time series (pressure) and vector time series (distributed temperature sensing). For each type of data, separate online anomaly detection algorithms were developed using the baseline experiment data (no leak) and then tested on the leak experiment data. Performance of a number of different online algorithms was compared. Results show the importance of including contextual information in the dataset to mitigate the impact of reservoir noise and reduce false positive rate. The developed algorithms were integrated into a generic Web-based platform for real-time anomaly detection.

  11. Two dimensional spectral camera development for cartilage monitoring

    Science.gov (United States)

    Kuehn, A.; Graf, A.; Wenzel, U.; Princz, S.; Miller, R.; Mantz, H.; Hessling, M.

    2015-07-01

    In the joint project "BioopTiss" between the Ulm University Medical Center and Ulm University of Applied Sciences, a bioreactor is under development to grow facial cartilage by the methods of tissue engineering. In order to ensure a sufficient quality of the cartilage for implantation, the cartilage growth must be monitored continuously. Current monitoring methods destroy the cultured cartilage so that it is no longer suitable for implantation. Alternatively, it is possible to analyze the cartilage using fluorescence spectroscopy with UV light excitation. This allows a non-invasive assessment of cartilage in terms of composition and quality. The cultured cartilage tissue can reach a size of several square centimeters. For recording fluorescence spectra of every point of the cartilage sample, a highly sensitive spectral camera has been developed which allows distinguishing collagen I from collagen II non-invasively by their fluorescence. This spectral camera operates according to the computed tomography imaging spectrometry (CTIS) principle, which allows obtaining many spectra of a small area with only one snapshot.

  12. Monitoring structure development in milk acidification using diffuse reflectance profiles

    DEFF Research Database (Denmark)

    Skytte, Jacob Lercke; Andersen, Ulf; Møller, Flemming

    2012-01-01

    The structure of dairy products is important for the consumer, and milk acidification plays a central role for structural development. To ensure the best possible consumer experience, it is important that a product’s structural properties are stable. Therefore process and quality control tools...... are needed so that the production can be carried out consistently, regardless of day-to-day variations in the raw materials. Casein micelles aggregate during milk acidification, which leads to formation of a gel network. This change of structure is important for the development of a range of dairy products....... It is therefore essential to monitor these structural changes and a variety of methods have been proposed to continuously follow this coagulation of milk [1]. Especially non-invasive methods for in situ production line application have been of interest. We propose a method for analyzing structural changes in milk...

  13. Development of a monitoring system for a PV solar plant

    International Nuclear Information System (INIS)

    Forero, N.; Hernandez, J.; Gordillo, G.

    2006-01-01

    The aim of this paper is to introduce a system developed for monitoring PV solar plants using a novel procedure based on virtual instrumentation. The measurements and processing of the data are made using high precision I/O modular field point (FP) devices as hardware, a data acquisition card as software and the package of graphic programming, LabVIEW. The system is able to store and display both the collected data of the environmental variables and the PV plant electrical output parameters, including the plant I-V curve. A relevant aspect of this work is the development of a unit that allows automatic measuring of the solar plant I-V curve using a car battery as power supply. The system has been in operation during the last two years and all its units have functioned well

  14. Development of thresholds of excess toxicity for environmental species and their application to identification of modes of acute toxic action.

    Science.gov (United States)

    Li, Jin J; Zhang, Xu J; Yang, Yi; Huang, Tao; Li, Chao; Su, Limin; Zhao, Yuan H; Cronin, Mark T D

    2018-03-01

    The acute toxicity of organic pollutants to fish, Daphnia magna, Tetrahymena pyriformis, and Vibrio fischeri was investigated. The results indicated that the Toxicity Ratio (TR) threshold of log TR =1, which has been based on the distribution of toxicity data to fish, can also be used to discriminate reactive or specifically acting compounds from baseline narcotics for Daphnia magna and Vibrio fischeri. A log TR=0.84 is proposed for Tetrahymena pyriformis following investigation of the relationships between the species sensitivity and the absolute averaged residuals (AAR) between the predicted baseline toxicity and the experimental toxicity. Less inert compounds exhibit relatively higher toxicity to the lower species (Tetrahymena pyriformis and Vibrio fischeri) than the higher species (fish and Daphnia magna). A greater number of less inert compounds with log TR greater than the thresholds was observed for Tetrahymena pyriformis and Vibrio fischeri. This may be attributed to the hydrophilic compounds which may pass more easily through cell membranes than the skin or exoskeleton of organisms and have higher bioconcentration factors in the lower species, leading to higher toxicity. Most of classes of chemical associated with excess toxicity to one species also exhibited excess toxicity to other species, however, a few classes with excess toxicity to one species exhibiting narcotic toxicity to other species and thus may have different MOAs between species. Some ionizable compounds have log TR much lower than one because of the over-estimated log K OW . The factors that influence the toxicity ratio calculated from baseline level are discussed in this paper. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. Setting thresholds to varying blood pressure monitoring intervals differentially affects risk estimates associated with white-coat and masked hypertension in the population.

    Science.gov (United States)

    Asayama, Kei; Thijs, Lutgarde; Li, Yan; Gu, Yu-Mei; Hara, Azusa; Liu, Yan-Ping; Zhang, Zhenyu; Wei, Fang-Fei; Lujambio, Inés; Mena, Luis J; Boggia, José; Hansen, Tine W; Björklund-Bodegård, Kristina; Nomura, Kyoko; Ohkubo, Takayoshi; Jeppesen, Jørgen; Torp-Pedersen, Christian; Dolan, Eamon; Stolarz-Skrzypek, Katarzyna; Malyutina, Sofia; Casiglia, Edoardo; Nikitin, Yuri; Lind, Lars; Luzardo, Leonella; Kawecka-Jaszcz, Kalina; Sandoya, Edgardo; Filipovský, Jan; Maestre, Gladys E; Wang, Jiguang; Imai, Yutaka; Franklin, Stanley S; O'Brien, Eoin; Staessen, Jan A

    2014-11-01

    Outcome-driven recommendations about time intervals during which ambulatory blood pressure should be measured to diagnose white-coat or masked hypertension are lacking. We cross-classified 8237 untreated participants (mean age, 50.7 years; 48.4% women) enrolled in 12 population studies, using ≥140/≥90, ≥130/≥80, ≥135/≥85, and ≥120/≥70 mm Hg as hypertension thresholds for conventional, 24-hour, daytime, and nighttime blood pressure. White-coat hypertension was hypertension on conventional measurement with ambulatory normotension, the opposite condition being masked hypertension. Intervals used for classification of participants were daytime, nighttime, and 24 hours, first considered separately, and next combined as 24 hours plus daytime or plus nighttime, or plus both. Depending on time intervals chosen, white-coat and masked hypertension frequencies ranged from 6.3% to 12.5% and from 9.7% to 19.6%, respectively. During 91 046 person-years, 729 participants experienced a cardiovascular event. In multivariable analyses with normotension during all intervals of the day as reference, hazard ratios associated with white-coat hypertension progressively weakened considering daytime only (1.38; P=0.033), nighttime only (1.43; P=0.0074), 24 hours only (1.21; P=0.20), 24 hours plus daytime (1.24; P=0.18), 24 hours plus nighttime (1.15; P=0.39), and 24 hours plus daytime and nighttime (1.16; P=0.41). The hazard ratios comparing masked hypertension with normotension were all significant (Phypertension requires setting thresholds simultaneously to 24 hours, daytime, and nighttime blood pressure. Although any time interval suffices to diagnose masked hypertension, as proposed in current guidelines, full 24-hour recordings remain standard in clinical practice. © 2014 American Heart Association, Inc.

  16. Setting Thresholds to Varying Blood Pressure Monitoring Intervals Differentially Affects Risk Estimates Associated With White-Coat and Masked Hypertension in the Population

    Science.gov (United States)

    Asayama, Kei; Thijs, Lutgarde; Li, Yan; Gu, Yu-Mei; Hara, Azusa; Liu, Yan-Ping; Zhang, Zhenyu; Wei, Fang-Fei; Lujambio, Inés; Mena, Luis J.; Boggia, José; Hansen, Tine W.; Björklund-Bodegård, Kristina; Nomura, Kyoko; Ohkubo, Takayoshi; Jeppesen, Jørgen; Torp-Pedersen, Christian; Dolan, Eamon; Stolarz-Skrzypek, Katarzyna; Malyutina, Sofia; Casiglia, Edoardo; Nikitin, Yuri; Lind, Lars; Luzardo, Leonella; Kawecka-Jaszcz, Kalina; Sandoya, Edgardo; Filipovský, Jan; Maestre, Gladys E.; Wang, Jiguang; Imai, Yutaka; Franklin, Stanley S.; O’Brien, Eoin; Staessen, Jan A.

    2015-01-01

    Outcome-driven recommendations about time intervals during which ambulatory blood pressure should be measured to diagnose white-coat or masked hypertension are lacking. We cross-classified 8237 untreated participants (mean age, 50.7 years; 48.4% women) enrolled in 12 population studies, using ≥140/≥90, ≥130/≥80, ≥135/≥85, and ≥120/≥70 mm Hg as hypertension thresholds for conventional, 24-hour, daytime, and nighttime blood pressure. White-coat hypertension was hypertension on conventional measurement with ambulatory normotension, the opposite condition being masked hypertension. Intervals used for classification of participants were daytime, nighttime, and 24 hours, first considered separately, and next combined as 24 hours plus daytime or plus nighttime, or plus both. Depending on time intervals chosen, white-coat and masked hypertension frequencies ranged from 6.3% to 12.5% and from 9.7% to 19.6%, respectively. During 91 046 person-years, 729 participants experienced a cardiovascular event. In multivariable analyses with normotension during all intervals of the day as reference, hazard ratios associated with white-coat hypertension progressively weakened considering daytime only (1.38; P=0.033), nighttime only (1.43; P=0.0074), 24 hours only (1.21; P=0.20), 24 hours plus daytime (1.24; P=0.18), 24 hours plus nighttime (1.15; P=0.39), and 24 hours plus daytime and nighttime (1.16; P=0.41). The hazard ratios comparing masked hypertension with normotension were all significant (Phypertension requires setting thresholds simultaneously to 24 hours, daytime, and nighttime blood pressure. Although any time interval suffices to diagnose masked hypertension, as proposed in current guidelines, full 24-hour recordings remain standard in clinical practice. PMID:25135185

  17. The development of remote wireless radiation dose monitoring system

    International Nuclear Information System (INIS)

    Lee, Jin-woo; Jeong, Kyu-hwan; Kim, Jong-il; Im, Chae-wan

    2015-01-01

    Internet of things (IoT) technology has recently shown a large flow of IT trends in human life. In particular, our lives are now becoming integrated with a lot of items around the 'smart-phone' with IoT, including Bluetooth, Near Field Communication (NFC), Beacons, WiFi, and Global Positioning System (GPS). Our project focuses on the interconnection of radiation dosimetry and IoT technology. The radiation workers at a nuclear facility should hold personal dosimeters such as a Thermo-Luminescence Dosimeter (TLD), an Optically Stimulated Luminescence Dosimeter (OSL), pocket ionization chamber dosimeters, an Electronic Personal Dosimeter (EPD), or an alarm dosimeter on their body. Some of them have functions that generate audible or visible alarms to radiation workers in a real working area. However, such devices used in radiation fields these days have no functions for communicating with other areas or the responsible personnel in real time. In particular, when conducting a particular task in a high dose area, or a number of repair works within a radiation field, radiation dose monitoring is important for the health of the workers and the work efficiency. Our project aims at the development of a remote wireless radiation dose monitoring system (RWRD) that can be used to monitor the radiation dose in a nuclear facility for radiation workers and a radiation protection program In this project, a radiation dosimeter is the detection device for personal radiation dose, a smart phone is the mobile wireless communication tool, and, Beacon is the wireless starter for the detection, communication, and position of the worker using BLE (Bluetooth Low Energy). In this report, we report the design of the RWRD and a demonstration case in a real radiation field. (authors)

  18. The development of remote wireless radiation dose monitoring system

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jin-woo [KAERI - Korea Atomic Energy Research Institute, Jeongup-si (Korea, Republic of); Chonbuk National University, Jeonjoo-Si (Korea, Republic of); Jeong, Kyu-hwan [KINS - Korea Institute of Nuclear Safety, Daejeon-Si (Korea, Republic of); Kim, Jong-il [Chonbuk National University, Jeonjoo-Si (Korea, Republic of); Im, Chae-wan [REMTECH, Seoul-Si (Korea, Republic of)

    2015-07-01

    Internet of things (IoT) technology has recently shown a large flow of IT trends in human life. In particular, our lives are now becoming integrated with a lot of items around the 'smart-phone' with IoT, including Bluetooth, Near Field Communication (NFC), Beacons, WiFi, and Global Positioning System (GPS). Our project focuses on the interconnection of radiation dosimetry and IoT technology. The radiation workers at a nuclear facility should hold personal dosimeters such as a Thermo-Luminescence Dosimeter (TLD), an Optically Stimulated Luminescence Dosimeter (OSL), pocket ionization chamber dosimeters, an Electronic Personal Dosimeter (EPD), or an alarm dosimeter on their body. Some of them have functions that generate audible or visible alarms to radiation workers in a real working area. However, such devices used in radiation fields these days have no functions for communicating with other areas or the responsible personnel in real time. In particular, when conducting a particular task in a high dose area, or a number of repair works within a radiation field, radiation dose monitoring is important for the health of the workers and the work efficiency. Our project aims at the development of a remote wireless radiation dose monitoring system (RWRD) that can be used to monitor the radiation dose in a nuclear facility for radiation workers and a radiation protection program In this project, a radiation dosimeter is the detection device for personal radiation dose, a smart phone is the mobile wireless communication tool, and, Beacon is the wireless starter for the detection, communication, and position of the worker using BLE (Bluetooth Low Energy). In this report, we report the design of the RWRD and a demonstration case in a real radiation field. (authors)

  19. Development of bremsstrahlung detection type tritium gas monitoring system, (1)

    International Nuclear Information System (INIS)

    Bingo, Kazuyoshi; Yoshida, Makoto; Chida, Tohru; Kawasaki, Katsuya

    1982-11-01

    A tritium monitoring system by means of bremsstrahlung detecting was developed. A prototype system consisted of a sampling cylinder, a gas circulating apparatus, an NaI(T1) detector, an amplifier and a multichannel analyzer. The sizes of sampling cylinders used 208 mm phi x 290; 170; 70 mmH, 133 mm phi x 292; 172; 72 mmH and 55 mm phi x 294; 174; 74 mmH, respectively. The sensitivity of prototype system was from 12 to 57 cps/μCi.cm - 3 , depending on the size of sampling cylinder and an efficiency of NaI(T1) detector. When pulses due to breamsstrahlungs with energy from 4 to 17 keV were counted, the minimum detectable concentration of the prototype tritium monitoring system was obtained to be 5.2 x 10 - 3 μCi/cm 3 . It was evaluated that the detectable range of concentration was from 1 x 10 - 2 to 1 x 10 3 μCi/cm 3 . (author)

  20. Development of area monitors confirming to ANSI/IEC standards

    International Nuclear Information System (INIS)

    Reddy, J.D.

    2010-01-01

    Area monitoring instruments manufactured by Nucleonix have evolved over time from simple digital circuits based designs to a state of art micro controller based, ruggedized plant worthy designs. Subsequent to switch to micro-controller designs, lot of features have been incorporated like 4-20mA, o/p Relay contacts., fault diagnostics and RS-485 connectivity over MODBUS-RTU. Customization to user specific demands were also made possible by these designs. The products have now reached a stabilization point meeting most of the customers requirements. During the course of time it was felt that the products developed needed to be performance tested as per some international standards especially for their radiation performance, environmental and electromagnetic compatibility. ANSI N.42-17A standard was found to be most appropriate and generic in nature. Hence this standard along with some other additional standards/ procedures applicable for nuclear installations like seismic tests, IP54 tests and radiation hardness tests were adopted and type test procedures were created in association with user agency. Subsequent to which type tests were taken up and carried out on all types of area monitors and completed over a period of one year after solving all sorts of problems in electrical performance, radiation performance, mechanical engineering issues during the course of the testing. (author)

  1. Development of fluctuation monitor type sodium ionization detector

    International Nuclear Information System (INIS)

    Yamamoto, Hajime; Sato, Yoshihiko; Ibe, Eishi; Suzuoki, Akira

    1986-01-01

    In order to improve the sensitivity and the reliability of the sodium leak detection system used in the fast breeder reactors, a new type SID (sodium ionization detector) has been developed, in which the monitored signal is only the fluctuating component of the current between the filament and the ion collector. The fluctuating component was extracted by a band pass filter and its root mean square value was calculated as the SID signal. Fluctuation characteristics of the output current were studied by its frequency spectrum. The results revealed that the current spectrum was affected by the particle size distribution of the aerosol and was most clearly distinguished from that of the background current in the frequency region of 0.5 ∼ 10 Hz. Output characteristics of the fluctuation monitor type SID (FM-SID) were obtained as a function of sodium concentration in the gas. The FM-SID sensitivity was lowered by impurities in the gas, such as oxygen and water vapor. Finally, in comparisons with the conventional DC-SIDs, the background noise level of the FM-SID was much lower and S/N ratio was greatly improved. The detectable sodium concentration level was ten times lower than that of the DC-SID. (author)

  2. Sustainability and in situ monitoring in battery development

    Science.gov (United States)

    Grey, C. P.; Tarascon, J. M.

    2017-01-01

    The development of improved rechargeable batteries represents a major technological challenge for this new century, as batteries constitute the limiting components in the shift from petrol (gasoline) powered to electric vehicles, while also enabling the use of more renewable energy on the grid. To minimize the ecological implications associated with their wider use, we must integrate sustainability of battery materials into our research endeavours, choosing chemistries that have a minimum footprint in nature and that are more readily recycled or integrated into a full circular economy. Sustainability and cost concerns require that we greatly increase the battery lifetime and consider second lives for batteries. As part of this, we must monitor the state of health of batteries continuously during operation to minimize their degradation. It is thus important to push the frontiers of operando techniques to monitor increasingly complex processes. In this Review, we will describe key advances in both more sustainable chemistries and operando techniques, along with some of the remaining challenges and possible solutions, as we personally perceive them.

  3. Development of CropWatch Online Agriculture Monitoring System

    Science.gov (United States)

    Zhang, X.; Wu, B.; Zhang, M.; Zeng, H.; Yan, N.

    2016-12-01

    CropWatch, which was developed by the Institute of Remote Sensing and Digital Earth (RADI) in the Chinese Academy of Sciences (CAS), has achieved breakthrough results in the integration of methods, independence of the assessments and support to emergency response by periodically releasing agricultural information for thirty-one countries over the world. Taking advantages of the multi-source remote sensing data and the openness of the data sharing policies, CropWatch group reported their monitoring results by publishing four bulletins one year. The digital agriculture system is an effective tool for people browse and analysis the agriculture monitoring results. For helping our group to analysis and write the bulletin better and providing our readers an alternative way to browser our results, we design and build the CropWatch online agriculture monitoring system based on the WEBGIS techniques. The figure shows the CropWatch online system structure. In this web application, three methods are provided to browse the data: Vector mode, Raster mode and Cluster mode. (1)Vector mode provides the statistical data of each area which including the current time value and the maximum and minimum values in five years. In this mode, users are able to look the global statistical data and the historical data change in a chart by selecting the region of interest; (2) Raster mode provides the abnormal index value by pixel globally. In this mode, users are able to locate the precise area where the notable exception occurred after they ensure the region in global statistical data. Meanwhile, the historical data change chart is still provided in this mode; (3) Data from remote sensing image series at high temporal and low spatial resolution provide key information in agriculture monitoring. Cluster mode provides the time series change by pixel in one country which users selected. The time series data is classified into 4 or 5 types by the ISODATA method. Users can click each type in the

  4. Development Of Data Acquisition Software For Centralized Radiation Monitoring System

    International Nuclear Information System (INIS)

    Nolida Yussup; Maslina Mohd Ibrahim; Mohd Fauzi Haris; Syirrazie Che Soh; Harzawardi Hasim; Azraf Azman; Mohd Ashhar Khalid

    2014-01-01

    Nowadays, with the growth of technology, many devices and equipment's can be connected to the network and internet to enable online data acquisition. Centralized radiation monitoring system utilizes a Local Area Network (LAN) as a communication media for data acquisition of the area radiation levels from radiation detectors in Malaysian Nuclear Agency (Nuclear Malaysia). The development of the system involves device configuration, wiring, network and hardware installation, software and web development. This paper describes the software development on the system server that is responsible to acquire and record the area radiation readings from the detectors. Then the recorded readings are called in a web programming to be displayed on a web site. The readings with the time stamp are stored in the system database for query. Besides acquiring the area radiation levels in Nuclear Malaysia centrally, additional features such as data conversion from mR to μSv and line chart display are developed in the software for effective radiation level trend observation and studies. (author)

  5. Development and implementation of a monitoring programme for ...

    African Journals Online (AJOL)

    This study designed and implemented a national estuarine monitoring programme for South African estuaries. The National Water Act (Act No. 36 of 1998) mandates the Department of Water and Sanitation (DWS) to undertake monitoring for the protection of water resources. Monitoring also forms an integral component of ...

  6. Threshold Concepts in Finance: Student Perspectives

    Science.gov (United States)

    Hoadley, Susan; Kyng, Tim; Tickle, Leonie; Wood, Leigh N.

    2015-01-01

    Finance threshold concepts are the essential conceptual knowledge that underpin well-developed financial capabilities and are central to the mastery of finance. In this paper we investigate threshold concepts in finance from the point of view of students, by establishing the extent to which students are aware of threshold concepts identified by…

  7. Advanced CO2 removal process control and monitor instrumentation development

    Science.gov (United States)

    Heppner, D. B.; Dalhausen, M. J.; Klimes, R.

    1982-01-01

    A progam to evaluate, design and demonstrate major advances in control and monitor instrumentation was undertaken. A carbon dioxide removal process, one whose maturity level makes it a prime candidate for early flight demonstration was investigated. The instrumentation design incorporates features which are compatible with anticipated flight requirements. Current electronics technology and projected advances are included. In addition, the program established commonality of components for all advanced life support subsystems. It was concluded from the studies and design activities conducted under this program that the next generation of instrumentation will be greatly smaller than the prior one. Not only physical size but weight, power and heat rejection requirements were reduced in the range of 80 to 85% from the former level of research and development instrumentation. Using a microprocessor based computer, a standard computer bus structure and nonvolatile memory, improved fabrication techniques and aerospace packaging this instrumentation will greatly enhance overall reliability and total system availability.

  8. Development of AE monitoring system for journal bearing

    International Nuclear Information System (INIS)

    Yoon, Dong Jin; Kwon, Oh Yang; Chung, Min Hwa

    1994-01-01

    For the purpose of monitoring of the bearing conditions in rotating machinery, a system for journal bearing diagnosis by AE was developed. Acoustic emission technique is used to detect abnormal conditions in the bearing system. And various data such as AE events, rms voltage level of AE signals, and AE parameters were acquired during experiments with the simulated journal bearing system. Based on the above results and practical application for power plant, algorithms and judgement criteria for diagnosis system was accomplished. Bearing diagnosis system is composed of four parts as follows : sensing part for AE sensor and preamplifier, signal processing part for rms-to-dc converting to measure AE rms voltage, interface part for connecting rms signal to PC using A/D converter, graphic display and software part for display of bearing condition and for managing of diagnosis program.

  9. Cardiorespiratory system monitoring using a developed acoustic sensor.

    Science.gov (United States)

    Abbasi-Kesbi, Reza; Valipour, Atefeh; Imani, Khadije

    2018-02-01

    This Letter proposes a wireless acoustic sensor for monitoring heartbeat and respiration rate based on phonocardiogram (PCG). The developed sensor comprises a processor, a transceiver which operates at industrial, scientific and medical band and the frequency of 2.54 GHz as well as two capacitor microphones which one for recording the heartbeat and another one for respiration rate. To evaluate the precision of the presented sensor in estimating heartbeat and respiration rate, the sensor is tested on the different volunteers and the obtained results are compared with a gold standard as a reference. The results reveal that root-mean-square error are determined sensor estimate sounds of [Formula: see text] to [Formula: see text] obtained PCG signal with sensitivity and specificity 98.1% and 98.3% in turn that make 3% improvement than previous works. The results prove that the sensor can be appropriate candidate for recognising abnormal condition in the cardiorespiratory system.

  10. Development of an instrument for fast monitoring of radiotherapy equipment

    International Nuclear Information System (INIS)

    Khoury, H.J.; Almeida Melo, F. de; Patriota, J.H.; Oliveira Lira, C.B. de

    1990-01-01

    Radiation therapy machines need a constant monitoring to assure tumoral dose accuracy. Special attention must be given to linear accelerators which should be checked frequently. By this reason, an instrument was developed at the Nuclear Instrumentation Laboratory DEN/UFPE to measure the output energy and beam symmetry. This instrument use three silicon photodiodes as radiation detectors. Two of then were localized at 5cm and 10cm depht at the central axis and one at 5 cm from the center, at the lateral irradiated field. Changes in the photon spectrum are detected by the ratio of upper to lower photodiode response. The radiation field uniformity is checked by the lateral photodiode. (author) [pt

  11. Development of multifunctional radiation monitoring instrument based on PLC technology

    International Nuclear Information System (INIS)

    Li Ziqiang; Zhu Yuye; Zhuang Min

    2007-01-01

    This eight-channel multifunctional Radiation Monitoring Instrument is developed by making use of the built-in high-speed counters and the powerful instruction system of the SIEMES SIMATICS S7 series Programmable Logic Controllers (PLC) to record and process the pulse signal output by the detectors. The instrument with functions, such as analog and digital display, digital storage of digital data, pulse signal generator, network communication, can connect various types of pulse detectors. The initial process can be translated between Graduation Apparatus method and Formula method. the logicality of the high-dosage warning system is processed itself. The signal output will drive the alarm lights and bell directly. This paper mainly describes the configuration, programming and feature of the instrument. (authors)

  12. Development of holdup monitor system (HMOS) during facility maintenance

    International Nuclear Information System (INIS)

    Nakamura, Hironobu; Hosoma, Takashi; Tanaka, Izumi

    1999-01-01

    Holdup MOnitor System (HMOS) was developed for the purpose of verifying the constant holdup during facility maintenance in Plutonium Conversion Development Facility (PCDF). The glove box assay system (GBAS; big slab) has been used by inspectors, measures the holdup periodically (i.e. IIV) using coincidence counting. The GBAS couldn't be used for inspection during maintenance period. Because many glove boxes (GB) set in process area had been occupied by large vinyl green-houses due to maintenance. We aimed that the holdup except for the maintenance GB should be constant during maintenance period, the HMOSs were set to 3 GBs. The system had been used from June '98 to July '99 for verification. The HMOS detector is located top/bottom of the GB, counts total neutron variation in the GB continuously. Detector efficiencies are 1.2%(top) and 0.12%(bottom), respectively. The measurement variation is observed up to 1.5%(3σ). The HMOS has high sensitivity 8 to 90g Pu (3σ; In case of 1kg Pu holdup, the sensitivity depends on position in the GB). The movement of equipment or nuclear material from/in the GB can be detected effectively. Though the HMOS observes measurement variation related to humidity in the GB, hygroscopic effect of denitration MOX powder, material/equipment movement and mainly 241 Pu nuclear decay, this system can verify that the holdup is constant qualitatively. As a result, in PCDF, safeguard related to the inventory verification during maintenance period (more than 1 year) were successfully performed using holdup monitor system. (author)

  13. Anaerobic threshold: its concept and role in endurance sport.

    Science.gov (United States)

    Ghosh, Asok Kumar

    2004-01-01

    aerobic to anaerobic transition intensity is one of the most significant physiological variable in endurance sports. Scientists have explained the term in various ways, like, Lactate Threshold, Ventilatory Anaerobic Threshold, Onset of Blood Lactate Accumulation, Onset of Plasma Lactate Accumulation, Heart Rate Deflection Point and Maximum Lactate Steady State. But all of these have great role both in monitoring training schedule and in determining sports performance. Individuals endowed with the possibility to obtain a high oxygen uptake need to complement with rigorous training program in order to achieve maximal performance. If they engage in endurance events, they must also develop the ability to sustain a high fractional utilization of their maximal oxygen uptake (%VO(2) max) and become physiologically efficient in performing their activity. Anaerobic threshold is highly correlated to the distance running performance as compared to maximum aerobic capacity or VO(2) max, because sustaining a high fractional utilization of the VO(2) max for a long time delays the metabolic acidosis. Training at or little above the anaerobic threshold intensity improves both the aerobic capacity and anaerobic threshold level. Anaerobic Threshold can also be determined from the speed-heart rate relationship in the field situation, without undergoing sophisticated laboratory techniques. However, controversies also exist among scientists regarding its role in high performance sports.

  14. Threshold quantum cryptography

    International Nuclear Information System (INIS)

    Tokunaga, Yuuki; Okamoto, Tatsuaki; Imoto, Nobuyuki

    2005-01-01

    We present the concept of threshold collaborative unitary transformation or threshold quantum cryptography, which is a kind of quantum version of threshold cryptography. Threshold quantum cryptography states that classical shared secrets are distributed to several parties and a subset of them, whose number is greater than a threshold, collaborates to compute a quantum cryptographic function, while keeping each share secretly inside each party. The shared secrets are reusable if no cheating is detected. As a concrete example of this concept, we show a distributed protocol (with threshold) of conjugate coding

  15. Cost Effective Instrumentation for Developing Autonomous Groundwater Monitoring Networks

    Science.gov (United States)

    Viti, T. M.; Garmire, D. G.

    2017-12-01

    Despite a relatively poor understanding of Hawaiian groundwater systems, the State of Hawaii depends almost exclusively on groundwater for its public water supply. Ike Wai, an NSF funded project (EPSCoR Program Award OIA #1557349) at the University of Hawaii, aims to develop new groundwater models for Hawaii's aquifers, including water quality and transport processes. To better understand aquifer properties such as capacity and hydraulic conductivity, we are developing well-monitoring instruments that can autonomously record water parameters such as conductivity, temperature, and hydraulic head level, with sampling frequencies on the order of minutes. We are currently exploring novel methods and materials for solving classical design problems, such as applying dielectric spectroscopy techniques for measuring salinity, and using recycled materials for producing custom cable assemblies. System components are fabricated in house using rapid prototyping (e.g. 3D printing, circuit board milling, and laser cutting), and traditional manufacturing techniques. This approach allows us to produce custom components while minimizing development cost, and maximizing flexibility in the overall system's design.

  16. A Model-Driven Framework to Develop Personalized Health Monitoring

    Directory of Open Access Journals (Sweden)

    Algimantas Venčkauskas

    2016-07-01

    Full Text Available Both distributed healthcare systems and the Internet of Things (IoT are currently hot topics. The latter is a new computing paradigm to enable advanced capabilities in engineering various applications, including those for healthcare. For such systems, the core social requirement is the privacy/security of the patient information along with the technical requirements (e.g., energy consumption and capabilities for adaptability and personalization. Typically, the functionality of the systems is predefined by the patient’s data collected using sensor networks along with medical instrumentation; then, the data is transferred through the Internet for treatment and decision-making. Therefore, systems creation is indeed challenging. In this paper, we propose a model-driven framework to develop the IoT-based prototype and its reference architecture for personalized health monitoring (PHM applications. The framework contains a multi-layered structure with feature-based modeling and feature model transformations at the top and the application software generation at the bottom. We have validated the framework using available tools and developed an experimental PHM to test some aspects of the functionality of the reference architecture in real time. The main contribution of the paper is the development of the model-driven computational framework with emphasis on the synergistic effect of security and energy issues.

  17. Summary report of a workshop on establishing cumulative effects thresholds : a suggested approach for establishing cumulative effects thresholds in a Yukon context

    International Nuclear Information System (INIS)

    2003-01-01

    Increasingly, thresholds are being used as a land and cumulative effects assessment and management tool. To assist in the management of wildlife species such as woodland caribou, the Department of Indian and Northern Affairs (DIAND) Environment Directorate, Yukon sponsored a workshop to develop and use cumulative thresholds in the Yukon. The approximately 30 participants reviewed recent initiatives in the Yukon and other jurisdictions. The workshop is expected to help formulate a strategic vision for implementing cumulative effects thresholds in the Yukon. The key to success resides in building relationships with Umbrella Final Agreement (UFA) Boards, the Development Assessment Process (DAP), and the Yukon Environmental and Socio-Economic Assessment Act (YESAA). Broad support is required within an integrated resource management framework. The workshop featured discussions on current science and theory of cumulative effects thresholds. Potential data and implementation issues were also discussed. It was concluded that thresholds are useful and scientifically defensible. The threshold research results obtained in Alberta, British Columbia and the Northwest Territories are applicable to the Yukon. One of the best tools for establishing and tracking thresholds is habitat effectiveness. Effects must be monitored and tracked. Biologists must share their information with decision makers. Interagency coordination and assistance should be facilitated through the establishment of working groups. Regional land use plans should include thresholds. 7 refs.

  18. Rapid microbiological testing: monitoring the development of bacterial stress.

    Directory of Open Access Journals (Sweden)

    Boris Zavizion

    2010-10-01

    Full Text Available The ability to respond to adverse environments effectively along with the ability to reproduce are sine qua non conditions for all sustainable cellular forms of life. Given the availability of an appropriate sensing modality, the ubiquity and immediacy of the stress response could form the basis for a new approach for rapid biological testing. We have found that measuring the dielectric permittivity of a cellular suspension, an easily measurable electronic property, is an effective way to monitor the response of bacterial cells to adverse conditions continuously. The dielectric permittivity of susceptible and resistant strains of Escherichia coli and Staphylococcus aureus, treated with gentamicin and vancomycin, were measured directly using differential impedance sensing methods and expressed as the Normalized Impedance Response (NIR. These same strains were also heat-shocked and chemically stressed with Triton X-100 or H(2O(2. The NIR profiles obtained for antibiotic-treated susceptible organisms showed a strong and continuous decrease in value. In addition, the intensity of the NIR value decrease for susceptible cells varied in proportion to the amount of antibiotic added. Qualitatively similar profiles were found for the chemically treated and heat-shocked bacteria. In contrast, antibiotic-resistant cells showed no change in the NIR values in the presence of the drug to which it is resistant. The data presented here show that changes in the dielectric permittivity of a cell suspension are directly correlated with the development of a stress response as well as bacterial recovery from stressful conditions. The availability of a practical sensing modality capable of monitoring changes in the dielectric properties of stressed cells could have wide applications in areas ranging from the detection of bacterial infections in clinical specimens to antibiotic susceptibility testing and drug discovery.

  19. Developing a Remotely Sensed Drought Monitoring Indicator for Morocco

    Directory of Open Access Journals (Sweden)

    Noureddine Bijaber

    2018-02-01

    Full Text Available Drought is one of the most serious climatic and natural disasters inflicting serious impacts on the socio-economy of Morocco, which is characterized both by low-average annual rainfall and high irregularity in the spatial distribution and timing of precipitation across the country. This work aims to develop a comprehensive and integrated method for drought monitoring based on remote sensing techniques. The main input parameters are derived monthly from satellite data at the national scale and are then combined to generate a composite drought index presenting different severity classes of drought. The input parameters are: Standardized Precipitation Index calculated from satellite-based precipitation data since 1981 (CHIRPS, anomalies in the day-night difference of Land Surface Temperature as a proxy for soil moisture, Normalized Difference Vegetation Index anomalies from Moderate Resolution Imaging Spectroradiometer (MODIS data and Evapotranspiration anomalies from surface energy balance modeling. All of these satellite-based indices are being used to monitor vegetation condition, rainfall and land surface temperature. The weighted combination of these input parameters into one composite indicator takes into account the importance of the rainfall-based parameter (SPI. The composite drought index maps were generated during the growing seasons going back to 2003. These maps have been compared to both the historical, in situ precipitation data across Morocco and with the historical yield data across different provinces with information being available since 2000. The maps are disseminated monthly to several main stakeholders’ groups including the Ministry of Agriculture and Department of Water in Morocco.

  20. First-language raters’ opinions when validating word recordings for a newly developed speech reception threshold test

    Directory of Open Access Journals (Sweden)

    Seema Panday

    2018-03-01

    Full Text Available Background: The purpose of this study was to consider the value of adding first-language speaker ratings to the process of validating word recordings for use in a new speech reception threshold (SRT test in audiology. Previous studies had identified 28 word recordings as being suitable for use in a new SRT test. These word recordings had been shown to satisfy the linguistic criteria of familiarity, phonetic dissimilarity and tone, and the psychometric criterion of homogeneity of audibility.   Objectives: The aim of the study was to consider the value of adding first-language speakers’ ratings when validating word recordings for a new SRT test.   Method: A single observation, cross-sectional design was used to collect and analyse quantitative data in this study. Eleven first-language isiZulu speakers, purposively selected, were asked to rate each of the word recordings for pitch, clarity, naturalness, speech rate and quality on a 5-point Likert scale. The percent agreement and Friedman test were used for analysis.   Results: More than 20% of these 11 participants rated the three-word recordings below ‘strongly agree’ in the category of pitch or tone, and one-word recording below ‘strongly agree’ in the categories of pitch or tone, clarity or articulation and naturalness or dialect.   Conclusion: The first-language speaker ratings proved to be a valuable addition to the process of selecting word recordings for use in a new SRT test. In particular, these ratings identified potentially problematic word recordings in the new SRT test that had been missed by the previously and more commonly used linguistic and psychometric selection criteria.

  1. Development of acoustic health monitoring for railroad tank cars

    Science.gov (United States)

    Gostautas, Richard; Finlayson, Richard; Godinez, Valery; Pollock, Adrian; Penya, Jose

    2005-05-01

    This paper presents the research and development of an Acoustic Health Monitoring (AHM) system that uses Guided Lamb Wave (GLW) technology to determine the thickness of railroad tank car shells for identification of wall loss due to corrosion. In recent regulatory changes, the emphasis has shifted from the traditional hydrotest to more modern methods for assuring tank car integrity. The new generation of maintenance programs will rely heavily on nondestructive testing, and will use damage tolerance concepts and risk analysis to establish inspection frequencies and items to inspect. It is the responsibility of the owners to set up experience-based maintenance programs that are suitable for the working conditions of their own particular fleets. Development of an ideal AHM system for railroad cars would be an instrument that incorporates Acoustic Emission (AE) and GLW technology. The combination of active and passive acoustic technologies integrated into a single system would be a highly efficient means of determining the structural integrity of tank cars. The integration of the GLW technology will allow identification of corrosion wall loss in a zone between two sensors, rather than at a single point (traditional ultrasonic thickness measurements). Thus, a much larger area of the structure can be inspected for approximately the same inspection cost. With a suitable integration of this new technology into the overall inspection and corrosion management program, the fleet can be more efficiently maintained and the risk of accidental release through progressive corrosion damage can be significantly reduced.

  2. Development of KOMAC Beam Monitoring System Using EPICS

    International Nuclear Information System (INIS)

    Song, Young-Gi; Yun, Sang-Pil; Kim, Han-Sung; Kwon, Hyeok-Jung; Cho, Yong-Sub

    2014-01-01

    The beam loss signals must be digitized and the sampling has to be synchronized to a reference signal which is an external trigger for beam operation. The digitized data must be accessible by the Experimental Physics and Industrial Control System (EPICS)-based control system, which manages the whole accelerator control. In order to satisfy the requirement, an Input /Output Controller (IOC), which runs Linux on a CPU module with PCI express based Analog to Digital Converter (ADC) modules, has been adopted. An associated linux driver and EPICS device support module also have been developed. The IOC meets the requirements and the development and maintenance of the software for the IOC is considerably efficient. The data acquisition system running EPICS will be used in increasing phase of KOrea Multi-purpose Accelerator Complex (KOMAC) beam power. The beam monitoring system integrates BLM and BPM signals into control system and offers real-time data to operators. The IOC, which is implemented with Linux and PCI driver, has supported data acquisition as a very flexible solution

  3. Jagiellonian University Development of the LHCb VELO monitoring software platform

    CERN Document Server

    Majewski, Maciej

    2017-01-01

    One of the most important parts of the LHCb spectrometer is the VErtex LOcator (VELO), dedicated to the precise tracking close to the proton–proton interaction point. The quality of data produced by the VELO depends on the calibration process, which must be monitored to ensure its correctness. This work presents details on how the calibration monitoring is conducted and how it could be improved. It also includes information on monitoring software and data flow in the LHCb software framework.

  4. Monitoring the development and diffusion of EHR systems in Denmark

    DEFF Research Database (Denmark)

    Nøhr, Christian; Andersen, Stig Kjær; Vingtoft, Søren

    2003-01-01

    The danish EHR Oberservatory has monitored Danish EHR projects for several years with respect to a number of parameters such as diffusion, diffusin rate, barriers and limitations, and experience gained. The results of the 2002 monitoring reveal that investment in IT is relatively low and the diff......The danish EHR Oberservatory has monitored Danish EHR projects for several years with respect to a number of parameters such as diffusion, diffusin rate, barriers and limitations, and experience gained. The results of the 2002 monitoring reveal that investment in IT is relatively low...

  5. Feature and Statistical Model Development in Structural Health Monitoring

    Science.gov (United States)

    Kim, Inho

    All structures suffer wear and tear because of impact, excessive load, fatigue, corrosion, etc. in addition to inherent defects during their manufacturing processes and their exposure to various environmental effects. These structural degradations are often imperceptible, but they can severely affect the structural performance of a component, thereby severely decreasing its service life. Although previous studies of Structural Health Monitoring (SHM) have revealed extensive prior knowledge on the parts of SHM processes, such as the operational evaluation, data processing, and feature extraction, few studies have been conducted from a systematical perspective, the statistical model development. The first part of this dissertation, the characteristics of inverse scattering problems, such as ill-posedness and nonlinearity, reviews ultrasonic guided wave-based structural health monitoring problems. The distinctive features and the selection of the domain analysis are investigated by analytically searching the conditions of the uniqueness solutions for ill-posedness and are validated experimentally. Based on the distinctive features, a novel wave packet tracing (WPT) method for damage localization and size quantification is presented. This method involves creating time-space representations of the guided Lamb waves (GLWs), collected at a series of locations, with a spatially dense distribution along paths at pre-selected angles with respect to the direction, normal to the direction of wave propagation. The fringe patterns due to wave dispersion, which depends on the phase velocity, are selected as the primary features that carry information, regarding the wave propagation and scattering. The following part of this dissertation presents a novel damage-localization framework, using a fully automated process. In order to construct the statistical model for autonomous damage localization deep-learning techniques, such as restricted Boltzmann machine and deep belief network

  6. Mobile and modular. BGR develops seismological monitoring stations for universal applications

    International Nuclear Information System (INIS)

    Hinz, Erwin; Hanneken, Mark

    2016-01-01

    BGR seismologists often set up monitoring stations for testing purposes. The engineers from the Central Seismological Observatory have now developed a new type of mobile monitoring station which can be remotely controlled.

  7. Guidelines for integrated catchments monitoring: ICM mind map development and demonstration

    CSIR Research Space (South Africa)

    Jovanovic, Nebojsa

    2011-09-01

    Full Text Available Advances have been made in recent years in developing networks and databases for monitoring water systems in South Africa. However, these monitoring systems need to be consolidated and integrated amongst various components of catchment systems...

  8. Monitoring the development and diffusion of EHR systems in Denmark

    DEFF Research Database (Denmark)

    Nøhr, Christian; Andersen, Stig Kjær; Vingtoft, Søren

    2003-01-01

    The danish EHR Oberservatory has monitored Danish EHR projects for several years with respect to a number of parameters such as diffusion, diffusin rate, barriers and limitations, and experience gained. The results of the 2002 monitoring reveal that investment in IT is relatively low...

  9. Acoustic Reflexes in Normal-Hearing Adults, Typically Developing Children, and Children with Suspected Auditory Processing Disorder: Thresholds, Real-Ear Corrections, and the Role of Static Compliance on Estimates.

    Science.gov (United States)

    Saxena, Udit; Allan, Chris; Allen, Prudence

    2017-06-01

    Previous studies have suggested elevated reflex thresholds in children with auditory processing disorders (APDs). However, some aspects of the child's ear such as ear canal volume and static compliance of the middle ear could possibly affect the measurements of reflex thresholds and thus impact its interpretation. Sound levels used to elicit reflexes in a child's ear may be higher than predicted by calibration in a standard 2-cc coupler, and lower static compliance could make visualization of very small changes in impedance at threshold difficult. For this purpose, it is important to evaluate threshold data with consideration of differences between children and adults. A set of studies were conducted. The first compared reflex thresholds obtained using standard clinical procedures in children with suspected APD to that of typically developing children and adults to test the replicability of previous studies. The second study examined the impact of ear canal volume on estimates of reflex thresholds by applying real-ear corrections. Lastly, the relationship between static compliance and reflex threshold estimates was explored. The research is a set of case-control studies with a repeated measures design. The first study included data from 20 normal-hearing adults, 28 typically developing children, and 66 children suspected of having an APD. The second study included 28 normal-hearing adults and 30 typically developing children. In the first study, crossed and uncrossed reflex thresholds were measured in 5-dB step size. Reflex thresholds were analyzed using repeated measures analysis of variance (RM-ANOVA). In the second study, uncrossed reflex thresholds, real-ear correction, ear canal volume, and static compliance were measured. Reflex thresholds were measured using a 1-dB step size. The effect of real-ear correction and static compliance on reflex threshold was examined using RM-ANOVA and Pearson correlation coefficient, respectively. Study 1 replicated previous

  10. Development of wireless sensor network for landslide monitoring system

    International Nuclear Information System (INIS)

    Suryadi; Puranto, Prabowo; Adinanta, Hendra; Tohari, Adrin; Priambodo, Purnomo S

    2017-01-01

    A wireless sensor network has been developed to monitor soil movement of some observed areas periodically. The system consists of four nodes and one gateway which installed on a scope area of 0.2 Km 2 . Each of nodehastwo types of sensor,an inclinometer and an extensometer. An inclinometer sensor is used to measure the tilt of a structure while anextensometer sensor is used to measure the displacement of soil movement. Each of nodeisalso supported by awireless communication device, a solar power supply unit, and a microcontroller unit called sensor module. In this system, there is also gateway module as a main communication system consistinga wireless communication device, power supply unit, and rain gauge to measure the rainfall intensity of the observed area. Each sensor of inclinometer and extensometer isconnected to the sensor module in wiring system but sensor module iscommunicating with gateway in a wireless system. Those four nodes are alsoconnectedeach other in a wireless system collecting the data from inclinometer and extensometer sensors. Module Gateway istransmitting the instruction code to each sensor module one by one and collecting the data from them. Gateway module is an important part to communicate with not only sensor modules but also to the server. This wireless system wasdesigned toreducethe electric consumption powered by 80 WP solar panel and 55Ah battery. This system has been implemented in Pangalengan, Bandung, which has high intensity of rainfall and it can be seen on the website. (paper)

  11. Development of Beam Conditions Monitor for the ATLAS experiment

    CERN Document Server

    Dolenc Kittelmann, Irena; Mikuž, M

    2008-01-01

    If there is a failure in an element of the accelerator the resulting beam losses could cause damage to the inner tracking devices of the experiments. This thesis presents the work performed during the development phase of a protection system for the ATLAS experiment at the LHC. The Beam Conditions Monitor (BCM) system is a stand-alone system designed to detect early signs of beam instabilities and trigger a beam abort in case of beam failures. It consists of two detector stations positioned at z=±1.84m from the interaction point. Each station comprises four BCM detector modules installed symmetrically around the beam pipe with sensors located at r=55 mm. This structure will allow distinguishing between anomalous events (beam gas and beam halo interactions, beam instabilities) and normal events due to proton-proton interaction by measuring the time-of-flight as well as the signal pulse amplitude from detector modules on the timescale of nanoseconds. Additionally, the BCM system aims to provide a coarse instan...

  12. Indigenous development of diamond detectors for monitoring neutrons

    International Nuclear Information System (INIS)

    Singh, Arvind; Amit Kumar; Topkar, Anita; Pithawa, C.K.

    2013-01-01

    High purity synthetic chemically vapor deposited (CVD) diamond has several outstanding characteristics that make it as an important material for detector applications specifically for extreme environmental conditions like high temperature, high radiation, and highly corrosive environments. Diamond detectors are especially considered promising for monitoring fast neutrons produced by the D-T nuclear fusion reactions in next generation fusion facilities such as ITER. When fast neutrons interact with carbon, elastic, inelastic and (n,α) type reactions can occur. These reactions can be employed for the detection of fast neutrons using diamond. We have initiated the development of diamond detectors based on synthetic CVD substrates. In this paper, the first test of a polycrystalline CVD diamond detector with fast neutrons is reported. The test results demonstrate that this detector can be used for monitoring fast neutrons. The diamond detectors have been fabricated using 5 mm x 5 mm, 300 μm polycrystalline diamond substrates. Aluminum metallization has been used on both sides of the detector to provide electrical contacts. The performance of fabricated detectors was first evaluated using current and capacitance measurements. The leakage current was observed to be stable and about a few pAs for voltages up to 300V. The capacitance-voltage characteristics showed a constant capacitance which is as expected. To confirm the response of the detector to charged particles, the pulse height spectrum (PHS) was obtained using 238 Pu- 239 Pu dual α- source. The PHS showed a continuum without any peak due to polycrystalline nature of diamond film. The response of the detector to fast neutrons has been studied using the fast neutron facility at NXF, BARC. The PHS obtained for a neutron yield of 4 x 10 8 n/s is shown. The average counts per second (cps) measured for diamond detector for different neutron yields is shown. The plot shows linearity with coefficient of determination R

  13. Oscillatory Threshold Logic

    Science.gov (United States)

    Borresen, Jon; Lynch, Stephen

    2012-01-01

    In the 1940s, the first generation of modern computers used vacuum tube oscillators as their principle components, however, with the development of the transistor, such oscillator based computers quickly became obsolete. As the demand for faster and lower power computers continues, transistors are themselves approaching their theoretical limit and emerging technologies must eventually supersede them. With the development of optical oscillators and Josephson junction technology, we are again presented with the possibility of using oscillators as the basic components of computers, and it is possible that the next generation of computers will be composed almost entirely of oscillatory devices. Here, we demonstrate how coupled threshold oscillators may be used to perform binary logic in a manner entirely consistent with modern computer architectures. We describe a variety of computational circuitry and demonstrate working oscillator models of both computation and memory. PMID:23173034

  14. Personal dosimetric monitoring in Ukraine: current status and further development

    International Nuclear Information System (INIS)

    Chumak, V. V.; Musijachenkom, A. V.; Boguslavskaya, A. I.

    2003-01-01

    Presently Ukraine has mixed system for dosimetric monitoring. Nuclear power plants and some major nuclear facilities have their own dosimetry services, which are responsible for regular dosimetric monitoring of workers. Rest of occupationally exposed persons is monitored by dosimetry laboratories affiliated to the territorial authorities for sanitary and epidemiology supervision. In 2002-2003 Ukrainian Ministry of Health performed survey of the status of dosimetric monitoring and inventory of critical groups requiring such monitoring. Dosimetry services in Ukraine cover about 38,000 occupationally exposed workers, including 9,100 medical professionals, 16,400 employees of 5 nuclear power plants and ca.12,400 workers dealing with other sources of occupational exposure (industry, research). Territorial dosimetry services operate in 13 of 24 regions of Ukraine, using DTU-01 manual TLD readers produced with one exception in 1988-1990. The coverage of critical groups by dosimetric monitoring is variable and ranges from 38% to 100% depending on the region. Personnel of nuclear power plants (about 16,400 workers) is monitored by their own dosimetry services achieving absolute coverage of the main staff and temporary workers. Current inadequate status of dosimetric monitoring infrastructure in Ukraine demands an urgent elaboration of the united state system for monitoring and recording of individual doses. The proposed plan would allows to bring dosimetry infrastructure in Ukraine to the modern state which would be compatible with existing and future European and international radiation protection networks. Unitary structure of Ukraine, strong administrative command and good communications between regions of the country are positive factors in favour of efficient implementation of the proposed plan. Deficiencies are associated with limited funding of this effort. (authors)

  15. The Development of Embedded Local Monitor Board (ELMB)

    CERN Document Server

    Boterenbrood, H; 9th Workshop On Electronics For Lhc Experiments

    2003-01-01

    The Embedded Local Monitor Board (ELMB) is a credit-card sized plug-on board, designed as a general-purpose CAN-bus based building block for various control and monitoring tasks in the LHC experiments. The latest and final version of the hardware in combination with the firmware shows to have even better radiation tolerance than before. This and the ELMB's low cost, low power consumption, software support - both low-level and high-level - have made the ELMB the solution of choice in a wide variety of control and monitoring applications. For the LHC experiments a total of ca. 10000 pieces will be produced.

  16. Threshold effect of the economic growth rate on the renewable energy development from a change in energy price. Evidence from OECD countries

    International Nuclear Information System (INIS)

    Chang, Ting-Huan; Huang, Chien-Ming; Lee, Ming-Chih

    2009-01-01

    This paper uses a panel threshold regression (PTR) model to investigate the influence that energy prices have on renewable energy development under different economic growth rate regimes. The empirical data are obtained from each of the OECD member-countries over the period from 1997 to 2006. We show that there is one threshold in the regression relationship, which is 4.13% of a one-period lag in the annual gross domestic product (GDP) growth rate. The consumer price index (CPI), in so far as it relates to variations in energy, is significantly positively correlated with the contribution of renewables to energy supply in the regime with higher-economic growth, but there is no relationship in the regime with lower economic growth. Therefore, countries characterized by high-economic growth are able to respond to high energy prices with increases in renewable energy use, while countries characterized by low-economic growth countries tend to be unresponsive to energy price changes when they come to their level of renewable energy. (author)

  17. Threshold effect of the economic growth rate on the renewable energy development from a change in energy price. Evidence from OECD countries

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Ting-Huan [Energy and Environment Research Laboratories, Industrial Technology Research Institute, Hsinchu County 310 (China); Department of Banking and Finance, Tamkang University, Taipei County 251 (China); Huang, Chien-Ming; Lee, Ming-Chih [Department of Banking and Finance, Tamkang University, Taipei County 251 (China)

    2009-12-15

    This paper uses a panel threshold regression (PTR) model to investigate the influence that energy prices have on renewable energy development under different economic growth rate regimes. The empirical data are obtained from each of the OECD member-countries over the period from 1997 to 2006. We show that there is one threshold in the regression relationship, which is 4.13% of a one-period lag in the annual gross domestic product (GDP) growth rate. The consumer price index (CPI), in so far as it relates to variations in energy, is significantly positively correlated with the contribution of renewables to energy supply in the regime with higher-economic growth, but there is no relationship in the regime with lower economic growth. Therefore, countries characterized by high-economic growth are able to respond to high energy prices with increases in renewable energy use, while countries characterized by low-economic growth countries tend to be unresponsive to energy price changes when they come to their level of renewable energy. (author)

  18. Threshold effect of the economic growth rate on the renewable energy development from a change in energy price: Evidence from OECD countries

    Energy Technology Data Exchange (ETDEWEB)

    Chang, T.-H. [Energy and Environment Research Laboratories, Industrial Technology Research Institute, Hsinchu County 310, Taiwan (China); Department of Banking and Finance, Tamkang University, Taipei County 251, Taiwan (China); Huang, C.-M., E-mail: 896530069@s96.tku.edu.t [Department of Banking and Finance, Tamkang University, Taipei County 251, Taiwan (China); Lee, M.-C. [Department of Banking and Finance, Tamkang University, Taipei County 251, Taiwan (China)

    2009-12-15

    This paper uses a panel threshold regression (PTR) model to investigate the influence that energy prices have on renewable energy development under different economic growth rate regimes. The empirical data are obtained from each of the OECD member-countries over the period from 1997 to 2006. We show that there is one threshold in the regression relationship, which is 4.13% of a one-period lag in the annual gross domestic product (GDP) growth rate. The consumer price index (CPI), in so far as it relates to variations in energy, is significantly positively correlated with the contribution of renewables to energy supply in the regime with higher-economic growth, but there is no relationship in the regime with lower economic growth. Therefore, countries characterized by high-economic growth are able to respond to high energy prices with increases in renewable energy use, while countries characterized by low-economic growth countries tend to be unresponsive to energy price changes when they come to their level of renewable energy.

  19. Development of internet service for airborne dust monitor

    International Nuclear Information System (INIS)

    Jakowiuk, A.

    2006-01-01

    During use of the system for acquisition and presentation of measuring data from dust monitors AMIZ-2004G, it became evident that creation of an internet service should be very useful. The task of such a service would be presentation of the idea of dust monitoring system that was put into operation, as well as presentation of measuring results from already existing measuring stations. Such an internet service was created and is accessible now on web page www.amiz.ajaksoft.com.pl. Description of the dust monitoring system, instruction how to operate the program for acquisition of measured data, operating instruction of the monitor AMIZ-2004G, and leaflets of the system can also be found there

  20. IAEA perspective on remote monitoring development and implementation

    International Nuclear Information System (INIS)

    Aparo, Massimo

    2006-01-01

    The IAEA has made rapid progress in exploiting remote monitoring in 84 systems and 302 cameras, which are spread over 15 states and Taiwan. The increased use, since 2003, of remote monitoring of VACOSS electronic seals is a new feature. Successful use of remote monitoring to spot potential breakdowns through state-of-health diagnostics on 14 occasions is also an important motivation for further implementation. This paper gave detailed descriptions of installed systems for data acquisition and transmission, particularly the SDIS (up to six cameras) and DMOS (up to 16 cameras). IAEA policy for data security and data sharing raise important issues that are relevant to cooperation in transparency that might be based on sharing of data from safeguards systems. Implementation of new remote monitoring systems may utilize satellite links, as under testing now in cooperation between the IAEA and the European Space Agency (ESA). (author)

  1. Design Exception In-Service Monitoring Program Development

    Science.gov (United States)

    2017-05-01

    This study evaluates various possible program designs for in-service monitoring of design exceptions (DEs) for the Georgia Department of Transportation. The study recommends a multitier stepwise approach to the evaluation of DEs. Specifically, the pr...

  2. Development of a customized radiation monitor for livestock screening.

    Science.gov (United States)

    Erchinger, J; Marianno, C; Herring, A

    2015-05-01

    The monitoring and decontamination of livestock has been an emerging topic in emergency response planning in recent years. Under the National Response Framework, the U.S. Department of Agriculture is tasked with providing support to the states during a radiological incident for the "assessment, control, and decontamination of contaminated animals, including companion animals, livestock, poultry, and wildlife." While there are currently no protocols in place on a national level for coordinated animal response, working groups have been developing a command structure and task force procedures, and some states have issued their own guidelines. A customized Bovine Screening Portal was manufactured and tested at Texas A&M University to investigate the operational capabilities in detecting, identifying, and localizing external contamination on livestock. An array of six sodium iodide detectors attached to power-over-Ethernet Multi-Channel Analyzers was used to collect time-stamped count rates, and spectral data were collected as a heifer was led past the detector panel. A 1.85 × 10(5) Bq 137Cs source was placed in four locations on a heifer, which was led through a cattle chute adjacent to the detector panel. The trials were repeated walking the heifer through a walkway with detectors hung on cattle pens lining a walkway. The Bovine Screening Portal observed increased count rates (>10σ) from the 1.85 × 10(5) Bq 137Cs source in live time. The identification capabilities with the intuitive software interface of the BSP are consistent with the requirements of a detection system for radiological emergency management of livestock.

  3. Development of Compact Surveillance and Monitoring System 'COSMOS'

    International Nuclear Information System (INIS)

    Ogawa, Hironobu; Mukaiyama, Takehiko

    1999-03-01

    The Compact Surveillance and Monitoring System (COSMOS) was developed by the Japan Atomic Energy Research Institute (JAERI) for the International Atomic Energy Agency (IAEA) as a safeguards surveillance system under the JASPAS (Japan Support Programme for Agency Safeguards) with the collaboration of the Sony Corporation. It was intended as a direct replacement to the Twin Minolta film camera system. The COSMOS system can operate with a self-contained battery, record 30,000 scenes with an 8 mm video cassette tape and operate continuously for three months without human intervention. It can also operate by AC power supply for more than three months, and record 45,000 scenes in an 8 mm video cassette tape. The COSMOS system consists of two units, one is the Recording Unit and the other is the Setup/Review Unit. The Recording Unit consists of a main frame, four modules and a tamperproof housing. The four modules are a small CCD (Charge Coupled Device) camera with an auto-iris lens and a specific VTR (Video Tape Recorder), a video frame memory module, a system control module, and a DC or an AC power module. Currently, the COSMOS is the only safeguards video surveillance system without the need of external power supply for three months. In 1992 thirteen COSMOS units were successfully tested for the reliability by both the IAEA and the JAERI. None of mechanical failure was observed. On the one hand, the battery operation tests using four units were successfully carried out with 5 minutes time interval for three months. Three units were also tested in the field and no failure was observed. The COSMOS was accepted as the routine-use device for international safeguards by the IAEA in August 1993. The total of 90 units were purchased by the IAEA from the manufacturer, SONY, and also several units were purchased by the Science and Technology Agency (STA) of Japan for the STA/IAEA joint-use in Japan. (author)

  4. Thresholds of Knowledge Development in Complex Problem Solving: A Multiple-Case Study of Advanced Learners' Cognitive Processes

    Science.gov (United States)

    Bogard, Treavor; Liu, Min; Chiang, Yueh-hui Vanessa

    2013-01-01

    This multiple-case study examined how advanced learners solved a complex problem, focusing on how their frequency and application of cognitive processes contributed to differences in performance outcomes, and developing a mental model of a problem. Fifteen graduate students with backgrounds related to the problem context participated in the study.…

  5. Development of a crack monitoring technique for use in a corrosion fatigue study of SA533-B pressure vessel steel

    International Nuclear Information System (INIS)

    Benson, J.M.; Tait, R.B.; Garrett, G.G.

    1981-10-01

    At present there does not exist a realistic crack growth law which will provide a good description of the relationship between the alternating stress intensity factor and the crack growth per cycle of stress. Such a law should be applicable to either the pressurized water reactor environment (PWR) or boiling water reactor environmnt (BWR). This project was formulated with the aim of examining the fatigue crack growth rate of SA533-B steel (a nuclear pressure vessel steel) in the threshold region in a simulated PWR environment. The aim of this report is to develop a crack monitoring technique for use in corrosion fatigue studies. Factors affecting fatigue crack propagation include: frequency, stress range, the effect of irradiation, ageing and environment. The mechanisms of crack propagation that are discussed include: slip dissolution, hydrogen assisted cracking, corrosion potential, and morphology studies. D.C. electrical potential, the compliance technique and the back-faced strain gauge method can be used for crack monitoring. Details are also given on the experimental equipment and programme. The results of the experiment has shown that the potential difference technique for monitoring crack length is a valuable one and is well suited for use in fatigue testing applications

  6. Developing of a telemetry monitoring system for a solar vehicle

    Energy Technology Data Exchange (ETDEWEB)

    Taha, Z.; Passarella, R.; Sah, J.M.; Hui, H.X.; Ahmad, N.; Ghazilla, R.A.R.; Jen, Y.H.; Khai, T.T. [Malaya Univ., Kuala Lumpur (Malaysia). Faculty of Engineering, Centre for Product Design and Manufacture

    2009-07-01

    Researchers at the Centre for Product Design and Manufacture at the University of Malaya designed and built a solar car specifically for the 2009 World Solar Challenge (WSC). The features of the UniMalaya include 20 sensors that measure vibration, temperature, current and battery voltage. The research team must monitor the condition of the car and driver during the 3000 km race to ensure optimum performance of the solar vehicle and safety of the driver. The proposed telemetry monitoring system uses National Instruments' LabVIEW along with its programmable automation controller CompactRIO and a laptop computer. This paper described the configuration and programming of the hardware. A simple experiment was conducted to monitor simulated signals that represent sensors in the solar vehicle. The proposed monitoring system successfully monitored the real time condition of the solar vehicle. It was shown to be capable of acquiring and processing signals, data logging and sending out data with wireless. 6 refs., 13 figs.

  7. Resistive Threshold Logic

    OpenAIRE

    James, A. P.; Francis, L. R. V. J.; Kumar, D.

    2013-01-01

    We report a resistance based threshold logic family useful for mimicking brain like large variable logic functions in VLSI. A universal Boolean logic cell based on an analog resistive divider and threshold logic circuit is presented. The resistive divider is implemented using memristors and provides output voltage as a summation of weighted product of input voltages. The output of resistive divider is converted into a binary value by a threshold operation implemented by CMOS inverter and/or O...

  8. Thresholds in chemical respiratory sensitisation.

    Science.gov (United States)

    Cochrane, Stella A; Arts, Josje H E; Ehnes, Colin; Hindle, Stuart; Hollnagel, Heli M; Poole, Alan; Suto, Hidenori; Kimber, Ian

    2015-07-03

    There is a continuing interest in determining whether it is possible to identify thresholds for chemical allergy. Here allergic sensitisation of the respiratory tract by chemicals is considered in this context. This is an important occupational health problem, being associated with rhinitis and asthma, and in addition provides toxicologists and risk assessors with a number of challenges. In common with all forms of allergic disease chemical respiratory allergy develops in two phases. In the first (induction) phase exposure to a chemical allergen (by an appropriate route of exposure) causes immunological priming and sensitisation of the respiratory tract. The second (elicitation) phase is triggered if a sensitised subject is exposed subsequently to the same chemical allergen via inhalation. A secondary immune response will be provoked in the respiratory tract resulting in inflammation and the signs and symptoms of a respiratory hypersensitivity reaction. In this article attention has focused on the identification of threshold values during the acquisition of sensitisation. Current mechanistic understanding of allergy is such that it can be assumed that the development of sensitisation (and also the elicitation of an allergic reaction) is a threshold phenomenon; there will be levels of exposure below which sensitisation will not be acquired. That is, all immune responses, including allergic sensitisation, have threshold requirement for the availability of antigen/allergen, below which a response will fail to develop. The issue addressed here is whether there are methods available or clinical/epidemiological data that permit the identification of such thresholds. This document reviews briefly relevant human studies of occupational asthma, and experimental models that have been developed (or are being developed) for the identification and characterisation of chemical respiratory allergens. The main conclusion drawn is that although there is evidence that the

  9. Threshold Signature Schemes Application

    Directory of Open Access Journals (Sweden)

    Anastasiya Victorovna Beresneva

    2015-10-01

    Full Text Available This work is devoted to an investigation of threshold signature schemes. The systematization of the threshold signature schemes was done, cryptographic constructions based on interpolation Lagrange polynomial, elliptic curves and bilinear pairings were examined. Different methods of generation and verification of threshold signatures were explored, the availability of practical usage of threshold schemes in mobile agents, Internet banking and e-currency was shown. The topics of further investigation were given and it could reduce a level of counterfeit electronic documents signed by a group of users.

  10. RFID based TLD monitoring system - a prospective development

    International Nuclear Information System (INIS)

    Jeevanram, S.S.; Pawar, S.T.; Mahule, K.N.; Rath, D.P.

    2008-01-01

    Thermo Luminescence Dosimetry (TLD) is an established method of monitoring the radiation dose received by workers in radiation environments. In Radiometallurgy Laboratory, BARC, the TLD movement inside a nuclear facility is completely carried out by a radiation worker. However, there is a chance that the TLDs may get lost in laboratories or some places without the knowledge of the concerned TLD user or health physicist. It may later lead to a false effective dose. Effort is being done to initiate a RFID based TLD monitoring system so that the use of TLD can be acknowledged through a self operating software which can prevent misuse of the detector. A novel method of improving the administrative control through Radio Frequency Identification (RFID) based monitoring to avoid such inadvertent misplacement of TLD, is in progress. This paper discusses the method and techniques through which administrative control can be exercised to reduce the number of such in explainable exposures. (author)

  11. Service water electrochemical monitoring development at Ontario Hydro

    International Nuclear Information System (INIS)

    Brennenstuhl, A.M.

    1994-01-01

    Ontario Hydro (OH) is currently investigating the feasibility of using electrochemical techniques for the corrosion monitoring of service water systems. To date all evaluations have been carried out in a field simulator. The studies include examining the effects of; system startup after periods of stagnation, sodium hypochlorite injection, and zebra mussel settlement on metallic surfaces. Carbon steel and Type 304L stainless steel have been evaluated. Electrochemical potential noise (EPN), electrochemical current noise (ECN) potential and coupling current were semi-continuously monitored over a period of up to one year. Data obtained from the electrochemical noise monitoring has given OH valuable insights into the mechanisms of degradation in service water systems. The high sensitivity of the electrochemical noise technique, particularly to localized corrosion has proved to be the major attraction of the system

  12. THEORETICAL AND PRACTICAL ASPECTS OF MONITORING OF REGION’S SOCIO-ECONOMIC DEVELOPMENT PROCESSES:

    Directory of Open Access Journals (Sweden)

    Valentyna Yakubiv

    2017-03-01

    Full Text Available The article defines the nature of socio-economic development processes monitoring in a region on the basis of systematization of scientific works on economics. The terms of monitoring introduction into the processes of socio-economic development of a region are defined. The difference between monitoring and standard statistic technology is explained. The fact that socio-economic processes monitoring is primarily directed at collection, examination and preparation of information for making and analyzing of economic decisions at different management levels is proved. The indicators by the direction “renewable energy and energy efficiency”, which are evaluated in the process of monitoring, are outlined. Major tasks of monitoring are defined and principles of its information basis forming are determined. Key words: decentralization, information basis, renewable energy, monitoring, region, development, socio-economic processes.

  13. Monitoring of trace organic air pollutants – a developing country perspective

    CSIR Research Space (South Africa)

    Forbes, PBC

    2008-09-01

    Full Text Available more appropriate to the developed world [4]. The Organisation for Economic Co-operation and Development (OECD) has investigated the impact of monitoring equipment on air quality management in developing countries [2]. Capacity building is achieved...

  14. Environmental effects monitoring at Cat Arm Hydraulic Development, Newfoundland, Canada

    International Nuclear Information System (INIS)

    Hill, E.L.

    1988-01-01

    The Cat Arm Dam is located on a plateau of the Long Range Mountains on Newfoundland's Great Northern Peninsula, and the 127 MW unit uses a 387 m head to produce an average of 676 GWh annually. Newfoundland and Labrador Hydro is conducting an environmental effects monitoring program in Cat Arm Reservoir to evaluate environmental impacts of the project. In the addendum to the Environmental Impact Statement of 1981, the utility agreed to a number of actions to mitigate the impacts of construction on fish populations, and to monitor the effects of reservoir creation, including the following. The mercury content of fish flesh, sediments and water would be monitored, and sampling would be undertaken prior to flooding to obtain baseline data, and for at least five years after flooding. The brook trout population would be monitored at various stages in the life of the reservoir in order to detect negative changes for which mitigative strategies could be applied. Alternative spawning habitat would be provided by removing barriers on streams or creating spawning beds if the monitoring program showed that recruitment was falling, and if these methods were ineffective, a compensatory stocking program would be considered. Extensive monitoring would be undertaken of the littoral zones, primary production in the reservoir, and of a number of limnological parameters to document long term changes in the reservoir. Although of academic interest, certain unusual characteristics of the Cat Arm reservoir, such as its low pH and dark colour, reduce its utility as a predictor of changes due to reservoir formation elsewhere in Newfoundland. 15 refs., 1 fig

  15. [The development of a respiration and temperature monitor].

    Science.gov (United States)

    Du, X; Wu, B; Liu, Y; He, Q; Xiao, J

    2001-12-01

    This paper introduces the design of a monitoring system to measure the respiration and temperature of a body with an 8Xc196 single-chip microcomputer. This system can measure and display the respiration wave, respiration frequency and the body temperature in real-time with a liquid crystal display (LCD) and give an alarm when the parameters are beyond the normal scope. In addition, this device can provide a 24 hours trend graph of the respiration frequency and the body temperature parameters measured. Data can also be exchanged through serial communication interfaces (RS232) between the PC and the monitor.

  16. Radiation detectors for personnel monitoring - current developments and future trends

    International Nuclear Information System (INIS)

    Kannan, S.

    2003-01-01

    The radiation detectors for personnel monitoring range from the conventional passive dosimeters like the film badge and the TLD, to sophisticated active dosimeters for integrated gamma, beta and neutron dose measurement. With the availability of high accuracy active dosimeters, the process of personnel monitoring, acceptability among radiation workers, record keeping and dose control have become more simplified. However the high level of sophistication in the active dosimeter has its own inevitable price tag and the new breed of active dosimeters are prohibitively costly. The silver lining, in the otherwise dark cost scenario of these dosimeters is the potential for cost reduction at least in some of the dosimeters in the near future

  17. Development of Transient Urgency Monitoring System for Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Park, Sang Jun; Shin, Jin Soo; Heo, Gyun Young [Kyung Hee University, Yongin (Korea, Republic of); Park, Jin Kyun [KAERI, Daejoen (Korea, Republic of); Kim, Hyo Jin; Park, Soon Yeol [Korea Hydro and Nuclear Power, Yeonggwang (Korea, Republic of)

    2011-08-15

    This paper introduces the development of a transient urgency monitoring system (1) to detect the early stage of a transient, (2) to identify a latent abnormal scenario, and (3) to inform an operator about the remaining time to the turbine trip when there is no operator's action. This study focused on the transients originated from the secondary system because the secondary system is recognized to be more complicated than the primary system in terms of its configuration and operation and has been a key factor to cause unplanned turbine-generator trips which can ultimately result in reactor trips. In order to make the proposed methodology practical forward, all the abnormal scenarios registered in the simulator of OPR-1000 were collected without any operator's intervention to provide the remaining time to the turbine trip and archived in the transient pattern database. The operating data periodically captured from the DCS is compared with the transient pattern database and a symptom can be detected in an initiating stage of an abnormal scenario. The transient pattern database consists of hundreds of variables, so it is difficult to speedily match patterns and to make a conclusion in a timely manner. The transient pattern database and the operating data are, therefore, converted into a smaller dimension using a dimensional compression or a feature extraction technique. In this study, principal component analysis was applied such that the principal components contain more than 99.9% of variance of the original transient patterns while the amount of information considered was less than 5% of the original data. The pattern matching between the principal components in the transient pattern database and the operating data is performed by similarity measures. Considering the different variance of an individual principal component, the final decision is determined by the weighting process for the results of similarity calculation. The most similar pattern to

  18. Developing And Validating A Measure Of Monitoring And Evaluation For The South Africa Skills Development Context

    Directory of Open Access Journals (Sweden)

    Tshilongamulenzhe Maelekanyo Christopher

    2015-06-01

    Full Text Available As nations around the world grapple with the deepening challenge of skills crunch, policies, strategies and interventions are being devised to develop and retain a competitive workforce. South Africa is not spared from the global talent war, and the persistence of skills shortages across most economic sectors makes the country vulnerable economically and socially. Legislative instruments and strategies were formulated and implemented to ameliorate the situation, but scientific evidence suggests a looming crisis due to poor monitoring and evaluation systems regarding the success of these instruments and strategies. This study develops and validates a monitoring and evaluation (ME scale for the South African skills development context. A quantitative nonexperimental cross-sectional survey design was used to collect data from 557 participants. Data were analyzed using SPSS and AMOS software (version 23.0. The findings show that the ME scale is scientifically valid and reliable and can be used with confidence in the South African skills development context. The findings provide scope for a validation study on an independent sample, and an evaluation of structural invariance of the ME scale across sample subgroups.

  19. Developments and Trends in Monitoring and Control of Machining Processes

    NARCIS (Netherlands)

    Tönshoff, H.K.; Wulfsberg, J.P.; Kals, H.J.J.; König, W.; van Luttervelt, C.A.

    1988-01-01

    This paper describes conventional and enhanced methods for the monitoring and control of machining processes with a limitation to cutting and grinding machine tools. The differences between the various methods and the corresponding equipment, software and strategies are considered as well as the

  20. Evaluation of stakeholder participation in monitoring regional sustainable development

    NARCIS (Netherlands)

    Hermans, F.L.P.; Haarmann, W.M.F.; Dagevos, John

    2011-01-01

    This paper presents a theoretical framework that can be used to discuss the question of how context, time and different participatory process designs influence the results of participatory monitoring projects in terms of concrete outputs (such as sustainability indicators) and the more intangible

  1. Development of monitoring and control technology based on trace gas monitoring. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Liebowitz, B.

    1997-07-01

    Trace gases are generated by many biological reactions. During anaerobic decomposition, trace levels of hydrogen (H{sub 2}) and carbon monoxide (CO) gases are produced. It was shown previously that these trace gases are intrinsically related to the biochemical reactions occurring and, therefore, offer promise for on-line process monitoring and control. This work was designed to test how effectively hydrogen and CO could be to monitor high-rate anaerobic systems that has significant mass transfer and complex hydraulics. An experimental program was designed to examine the behavior of an upflow anaerobic sludge blanket (UASB) reactor system under steady state and in response to organic loading perturbations. The responses of trace gases CO and H{sub 2} were tracked using an on-line, real-time gas-monitoring system linked to a computer-controlled data acquisition package. Data on conventional process parameters such as pH, chemical oxygen demand (COD), volatile fatty acids (VFAs) were concurrently collected. Monitoring of conventional process indicators (i.e., pH, VFA, gas production) and trace gas (H{sub 2} and CO) indicators was conducted using a matrix of nine different steady-state OLRs (4-23 kg COD/m{sup 3} -d) and system HRTs (0.5 to 2.5 days) was performed to determine any correlation among the indicators. Of OLR, HRT, and influent COD, only OLR had any significant influence on the process indicators examined. All parameters except methane increased with increases in OLR; methane decreased with increased OLR. The OLR and gas production rate (GP) were observed to be linearly correlated.

  2. On computational Gestalt detection thresholds.

    Science.gov (United States)

    Grompone von Gioi, Rafael; Jakubowicz, Jérémie

    2009-01-01

    The aim of this paper is to show some recent developments of computational Gestalt theory, as pioneered by Desolneux, Moisan and Morel. The new results allow to predict much more accurately the detection thresholds. This step is unavoidable if one wants to analyze visual detection thresholds in the light of computational Gestalt theory. The paper first recalls the main elements of computational Gestalt theory. It points out a precision issue in this theory, essentially due to the use of discrete probability distributions. It then proposes to overcome this issue by using continuous probability distributions and illustrates it on the meaningful alignment detector of Desolneux et al.

  3. The participatory design of a performance oriented monitoring and evaluation system in an international development environment.

    Science.gov (United States)

    Guerra-López, Ingrid; Hicks, Karen

    2015-02-01

    This article illustrates the application of the impact monitoring and evaluation process for the design and development of a performance monitoring and evaluation framework in the context of human and institutional capacity development. This participative process facilitated stakeholder ownership in several areas including the design, development, and use of a new monitoring and evaluation system, as well their targeted results and accomplishments through the use of timely performance data gathered through ongoing monitoring and evaluation. The process produced a performance indicator map, a comprehensive monitoring and evaluation framework, and data collection templates to promote the development, implementation, and sustainability of the monitoring and evaluation system of a farmer's trade union in an African country. Copyright © 2014 Elsevier Ltd. All rights reserved.

  4. Comparison and Cost Analysis of Drinking Water Quality Monitoring Requirements versus Practice in Seven Developing Countries

    Science.gov (United States)

    Crocker, Jonny; Bartram, Jamie

    2014-01-01

    Drinking water quality monitoring programs aim to support provision of safe drinking water by informing water quality management. Little evidence or guidance exists on best monitoring practices for low resource settings. Lack of financial, human, and technological resources reduce a country’s ability to monitor water supply. Monitoring activities were characterized in Cambodia, Colombia, India (three states), Jordan, Peru, South Africa, and Uganda according to water sector responsibilities, monitoring approaches, and marginal cost. The seven study countries were selected to represent a range of low resource settings. The focus was on monitoring of microbiological parameters, such as E. coli, coliforms, and H2S-producing microorganisms. Data collection involved qualitative and quantitative methods. Across seven study countries, few distinct approaches to monitoring were observed, and in all but one country all monitoring relied on fixed laboratories for sample analysis. Compliance with monitoring requirements was highest for operational monitoring of large water supplies in urban areas. Sample transport and labor for sample collection and analysis together constitute approximately 75% of marginal costs, which exclude capital costs. There is potential for substantive optimization of monitoring programs by considering field-based testing and by fundamentally reconsidering monitoring approaches for non-piped supplies. This is the first study to look quantitatively at water quality monitoring practices in multiple developing countries. PMID:25046632

  5. Comparison and cost analysis of drinking water quality monitoring requirements versus practice in seven developing countries.

    Science.gov (United States)

    Crocker, Jonny; Bartram, Jamie

    2014-07-18

    Drinking water quality monitoring programs aim to support provision of safe drinking water by informing water quality management. Little evidence or guidance exists on best monitoring practices for low resource settings. Lack of financial, human, and technological resources reduce a country's ability to monitor water supply. Monitoring activities were characterized in Cambodia, Colombia, India (three states), Jordan, Peru, South Africa, and Uganda according to water sector responsibilities, monitoring approaches, and marginal cost. The seven study countries were selected to represent a range of low resource settings. The focus was on monitoring of microbiological parameters, such as E. coli, coliforms, and H2S-producing microorganisms. Data collection involved qualitative and quantitative methods. Across seven study countries, few distinct approaches to monitoring were observed, and in all but one country all monitoring relied on fixed laboratories for sample analysis. Compliance with monitoring requirements was highest for operational monitoring of large water supplies in urban areas. Sample transport and labor for sample collection and analysis together constitute approximately 75% of marginal costs, which exclude capital costs. There is potential for substantive optimization of monitoring programs by considering field-based testing and by fundamentally reconsidering monitoring approaches for non-piped supplies. This is the first study to look quantitatively at water quality monitoring practices in multiple developing countries.

  6. Comparison and Cost Analysis of Drinking Water Quality Monitoring Requirements versus Practice in Seven Developing Countries

    Directory of Open Access Journals (Sweden)

    Jonny Crocker

    2014-07-01

    Full Text Available Drinking water quality monitoring programs aim to support provision of safe drinking water by informing water quality management. Little evidence or guidance exists on best monitoring practices for low resource settings. Lack of financial, human, and technological resources reduce a country’s ability to monitor water supply. Monitoring activities were characterized in Cambodia, Colombia, India (three states, Jordan, Peru, South Africa, and Uganda according to water sector responsibilities, monitoring approaches, and marginal cost. The seven study countries were selected to represent a range of low resource settings. The focus was on monitoring of microbiological parameters, such as E. coli, coliforms, and H2S-producing microorganisms. Data collection involved qualitative and quantitative methods. Across seven study countries, few distinct approaches to monitoring were observed, and in all but one country all monitoring relied on fixed laboratories for sample analysis. Compliance with monitoring requirements was highest for operational monitoring of large water supplies in urban areas. Sample transport and labor for sample collection and analysis together constitute approximately 75% of marginal costs, which exclude capital costs. There is potential for substantive optimization of monitoring programs by considering field-based testing and by fundamentally reconsidering monitoring approaches for non-piped supplies. This is the first study to look quantitatively at water quality monitoring practices in multiple developing countries.

  7. Design and Development of Intelligent Electrodes for Future Digital Health Monitoring: A Review

    Science.gov (United States)

    Khairuddin, A. M.; Azir, K. N. F. Ku; Kan, P. Eh

    2018-03-01

    Electrodes are sensors used in electrocardiography (ECG) monitoring system to diagnose heart diseases. Over the years, diverse types of electrodes have been designed and developed to improve ECG monitoring system. However, more recently, with the technological advances and capabilities from the Internet of Things (IoT), cloud computing and data analytics in personalized healthcare, researchers are attempting to design and develop more effective as well as flexible ECG devices by using intelligent electrodes. This paper reviews previous works on electrodes used in electrocardiography (ECG) monitoring devices to identify the key ftures for designing and developing intelligent electrodes in digital health monitoring devices.

  8. DOE approach to threshold quantities

    International Nuclear Information System (INIS)

    Wickham, L.E.; Kluk, A.F.; Department of Energy, Washington, DC)

    1985-01-01

    The Department of Energy (DOE) is developing the concept of threshold quantities for use in determining which waste materials must be handled as radioactive waste and which may be disposed of as nonradioactive waste at its sites. Waste above this concentration level would be managed as radioactive or mixed waste (if hazardous chemicals are present); waste below this level would be handled as sanitary waste. Ideally, the threshold must be set high enough to significantly reduce the amount of waste requiring special handling. It must also be low enough so that waste at the threshold quantity poses a very small health risk and multiple exposures to such waste would still constitute a small health risk. It should also be practical to segregate waste above or below the threshold quantity using available instrumentation. Guidance is being prepared to aid DOE sites in establishing threshold quantity values based on pathways analysis using site-specific parameters (waste stream characteristics, maximum exposed individual, population considerations, and site specific parameters such as rainfall, etc.). A guidance dose of between 0.001 to 1.0 mSv/y (0.1 to 100 mrem/y) was recommended with 0.3 mSv/y (30 mrem/y) selected as the guidance dose upon which to base calculations. Several tasks were identified, beginning with the selection of a suitable pathway model for relating dose to the concentration of radioactivity in the waste. Threshold concentrations corresponding to the guidance dose were determined for waste disposal sites at a selected humid and arid site. Finally, cost-benefit considerations at the example sites were addressed. The results of the various tasks are summarized and the relationship of this effort with related developments at other agencies discussed

  9. Monitoring of temperature gradient development of highway concrete bridge

    Directory of Open Access Journals (Sweden)

    Krkoska Lukas

    2017-01-01

    Full Text Available Thermal effect is one of very important from the large bridge design procedure point of view. Especially vertical temperature gradient is being crucial. There were realized some research works of the thermal effects monitoring on the concrete bridges in the world. More of them were performed in the USA but only a few at European bridges. The short overview of our long-term monitoring of the temperature load on chosen concrete bridge is presented in this paper. We decided to analyse one concrete box girder bridge that was built by incremental launching method on highway D1 at Slovakia near Zilina city. Recorded temperature gradient was compared with thermal gradients for the concrete box girder bridge recommended by EC 1991-1-5 design specifications.

  10. Chromatic monitoring of dc plasma torches: The latest developments

    Czech Academy of Sciences Publication Activity Database

    Djakov, B. E.; Enikov, R.; Oliver, D.H.; Hrabovský, Milan; Kopecký, Vladimír

    2006-01-01

    Roč. 3, č. 2 (2006), s. 170-173 ISSN 1612-8850 R&D Projects: GA ČR(CZ) GA202/05/0669 Institutional research plan: CEZ:AV0Z20430508 Keywords : chromatic monitoring * on-line control * plasma jet * plasma torch * powder Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 2.298, year: 2006

  11. Landslide monitoring and early warning systems in Lower Austria - current situation and new developments

    Science.gov (United States)

    Thiebes, Benni; Glade, Thomas; Schweigl, Joachim; Jäger, Stefan; Canli, Ekrem

    2014-05-01

    of the earth flow site will be monitored by differential GPS to get high precision information on displacements of marked points. Photogrammtetry based on octocopter surveys will provide spatial information on movement patterns. A similar approach will be followed for the debris flow catchment. Here, the focus lies on a monitoring of the landslide failures in the source area which prepares the material for subsequent debris flow transport. In addition to the methods already mentioned, repeated terrestrial laserscanning campaigns will be used to monitor geomorphological changes at all sites. All important data, which can be single measurements, episodic or continuous monitoring data for a given point (e.g. rainfall, inclination) or of spatial character (e.g. LiDAR measurements), are collected and analysed on an external server. Automatic data analysis methods, such as progressive failure analysis, are carried out automatically based on field measurements. The data and results from all monitoring sites are visualised on a web-based platform which enables registered users to analyse the respective information in near-real-time. Moreover, thresholds can be determined which trigger automated warning messages to the involved scientists if thresholds are exceeded by field measurements. The described system will enable scientists and decision-makers to access the latest data from the monitoring systems. Automatic alarms are raised when thresholds are exceeded to inform them about potentially hazardous changes. Thereby, a more efficient hazard management and early warning can be achieved. Keywords: landslide, rockfall, debris flow, earth flow, monitoring, early warning system.

  12. Design and Development of Hand and Foot Contamination Monitor

    Directory of Open Access Journals (Sweden)

    F. Akter

    2014-08-01

    Full Text Available A hand and foot contamination monitor is a health physics instrument to provide detection and measurement of beta-gamma contamination on the palm of each hand and on the bottom surface of both feet/shoes. There are four channels of detection for two hands and two feet. Four G-M detectors have been used in a single unit to cover the whole area of hand and feet. A regulated high voltage DC power supply (900 V has been designed using the PIC12F675 microcontroller to operate the pancake Geiger-Müller detectors. The reading is displayed on a linearly scaled 0-100 Bq/cm2 analog panel meter. The monitor detects beta–gamma radiation emitted by radioactive materials, and if the detected value exceeds a preset level, the monitor sounds an alarm and displays a reading in the respective panel meter. Indicator lamps are used to show the status of contamination. The performance of the system has been tested by using pulse generator and by flat surface radioactive calibration sources. Electronic linearity, detection efficiency, response to the contamination, calibration factor and percentage of error has been measured. Test results were satisfactory and the present system can be used instead of similar imported instruments.

  13. Tunable Laser Development for In-flight Fiber Optic Based Structural Health Monitoring Systems

    Science.gov (United States)

    Richards, Lance; Parker, Allen; Chan, Patrick

    2014-01-01

    The objective of this task is to investigate, develop, and demonstrate a low-cost swept lasing light source for NASA DFRC's fiber optics sensing system (FOSS) to perform structural health monitoring on current and future aerospace vehicles. This is the regular update of the Tunable Laser Development for In-flight Fiber Optic Based Structural Health Monitoring Systems website.

  14. Threshold behavior in electron-atom scattering

    International Nuclear Information System (INIS)

    Sadeghpour, H.R.; Greene, C.H.

    1996-01-01

    Ever since the classic work of Wannier in 1953, the process of treating two threshold electrons in the continuum of a positively charged ion has been an active field of study. The authors have developed a treatment motivated by the physics below the double ionization threshold. By modeling the double ionization as a series of Landau-Zener transitions, they obtain an analytical formulation of the absolute threshold probability which has a leading power law behavior, akin to Wannier's law. Some of the noteworthy aspects of this derivation are that the derivation can be conveniently continued below threshold giving rise to a open-quotes cuspclose quotes at threshold, and that on both sides of the threshold, absolute values of the cross sections are obtained

  15. Maternal mortality as a Millennium Development Goal of the United Nations: a systematic assessment and analysis of available data in threshold countries using Indonesia as example.

    Science.gov (United States)

    Reinke, Evelyn; Supriyatiningsih; Haier, Jörg

    2017-06-01

    In 2015 the proposed period ended for achieving the Millennium Development Goals (MDG) of the United Nations targeting to lower maternal mortality worldwide by ~ 75%. 99% of these cases appear in developing and threshold countries; but reports mostly rely on incomplete or unrepresentative data. Using Indonesia as example, currently available data sets for maternal mortality were systematically reviewed. Besides analysis of international and national data resources, a systematic review was carried out according to Cochrane methodology to identify all data and assessments regarding maternal mortality. Overall, primary data on maternal mortality differed significantly and were hardly comparable. For 1990 results varied between 253/100 000 and 446/100 000. In 2013 data appeared more conclusive (140-199/100 000). An annual reduction rate (ARR) of -2.8% can be calculated. Reported data quality of maternal mortality in Indonesia is very limited regarding comprehensive availability and methodology. This limitation appears to be of general importance for the targeted countries of the MDG. Primary data are rare, not uniformly obtained and not evaluated by comparable methods resulting in very limited comparability. Continuous small data set registration should have high priority for analysis of maternal health activities.

  16. The development report of an intelligent neutron fluence integration monitor

    International Nuclear Information System (INIS)

    Jiang Zongbing; Wei Ying

    1996-10-01

    An intelligent neutron fluence integration monitor is introduced. It is used to measure the received neutron fluence of the monocrystalline silicon in reactor radiation channel. The significance of study and specifications of the instrument are briefly described. The emphasis is on the working principle, structure and characteristics of the instrument is intelligent due to use of monolithic microcomputer. It has many advantages proved in the actual practice, such as powerful function, high accuracy, diversity of application, high level automatization, easy to operate, high reliability, etc. After using this instrument the monocrystalline silicon radiation technology is improved and the efficiency of production is raised. (1 fig.)

  17. Learning to drive: developing a workable awareness plan for monitoring new technology.

    Science.gov (United States)

    Berryman, Donna R

    2010-04-01

    Technology is constantly driving forward, and information professionals need to be informed about developments in order to work more effectively, provide new services, understand what users need and want, and to develop professionally. Learning how to monitor these developments in technology is a skill, just like learning to drive. This article provides information about developing a workable awareness plan and provides some suggested sites to monitor and tools to use.

  18. Quality management status of national radiation environmental monitoring network and strategy for development

    International Nuclear Information System (INIS)

    Huang Renjie; Zhang Rongsuo; Ni Shiying; Shen Gang

    2009-01-01

    During the period of 10th five-year plan, MEP has constructed a national radiation environmental monitoring network. In the running of the network, quality management on monitoring data is of vital importance. So all the members of the radiation environmental monitoring network are required to ensure the quality of monitoring method, equipment, reagent,quality of personnel, data processing and information management and so on. Thus the monitoring result would be typical and accuracy in science. The article introduced in detail the quality management status of the National Radiation Environmental Monitoring Network and put forward the strategy for development from the institutionalized and large-scale point of view of radioactive environmental monitoring work. (authors)

  19. Development of real time monitoring for ITER first wall erosion

    International Nuclear Information System (INIS)

    Berryman, Ian.; Pallaras, Luke; Thomson, Laura; Wang, Michael; Riley, Daniel P.

    2009-01-01

    Full text: This project aims to contribute to the current research on the first wall erosion diagnostic for the ITER fusion reactor. The plasma-facing first wall tiles of the ITER tokamak reactor are exposed to an expected neutron flux of O. 7 8 M W/m2 and a thermal load of O. 5M W/m 2 during operation. Instabilities in the magnetically confined plasma, such as edge-Iocalised modes, cause the plasma to come into direct contact with the first wall. The resulting thermal loads can vaporise and ablate the tile material. Moreover, a flux of high-energy neutrons produced during the fusion process results in a range of radiation effects. Therefore, a diagnostic is necessary to monitor the extent and rate of damage caused to the first wall. We have considered and critically assessed the viability of six alternative diagnostic methods, encompassing both established and novel concepts. From these, a design featuring embedded conducting elements was selected as the strongest candidate, as by monitoring electrical signals it has the potential to detect both bulk erosion and radiation damage.

  20. The development of advanced instrumentation and control technology -The development of digital monitoring technique-

    Energy Technology Data Exchange (ETDEWEB)

    Jun, Jong Sun; Lee, Byung Sun; Han, Sang Joon; Shin, Yong Chul; Kim, Yung Baek; Kim, Dong Hoon; Oh, Yang Kyoon; Suh, Yung; Choi, Chan Duk; Kang, Byung Hun; Hong, Hyung Pyo; Shin, Jee Tae; Moon, Kwon Kee; Lee, Soon Sung; Kim, Sung Hoh; Koo, In Soo; Kim, Dong Wan; Huh, Sub [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1995-07-01

    A study has been performed for the advanced DSP technology for digital nuclear I and C systems and its prototype, and for the monitoring and diagnosing techniques for the highly-pressurized components in NSSS. In the DSP part, the DSP requirements for NPPs have been induced for the performance of the DSP systems and the functional analysis for Reactor Coolant System (RCS) has been performed as the embodied target system. Total quantities of the I and C signals, signal types, and signal functions were also investigated in Ulchin NPP units 3 and 4. From these basis, the prototype facility was configured for performance validation and algorithm implementation. In order to develop the methods of DSP techniques and algorithms, the current signal validation methods have been studied and analyzed. In the analysis for the communication networks in NPP, the basic technique for the configuration of communication networks and the important considerations for applying to NPPs have been reviewed. Test and experimental facilities have been set up in order to carry out the required tests during research activities on the monitoring techniques for abnormal conditions. Studies were concentrated on methods how to acquire vibration signals from the mechanical structures and equipment including rotating machinery and reactor, and analyses for the characteristics of the signals. Fuzzy logic was evaluated as a good technique to improve the reliability of the monitoring and diagnosing algorithm through the application of the theory such as the automatic pattern recognition algorithm of the vibration spectrum, the alarm detection and diagnosis for collisions of loose parts. 71 figs, 32 tabs, 64 refs. (Author).

  1. Development and implementation of a PV performance monitoring system based on inverter measurements

    DEFF Research Database (Denmark)

    Spataru, Sergiu; Gavriluta, Anamaria Florina; Maaløe, Lars

    2016-01-01

    currently the cost of the performance monitoring hardware and implementation is high. Therefore, we present the practical development and implementation of a PV performance monitoring system for residential and commercial PV applications, where the cost of the monitoring hardware is lowered, by using......Performance monitoring and fault detection systems have become necessary for decreasing operation and maintenance cost in large photovoltaic (PV) plants, as well for maximizing plan yield and lifetime. We expect a similar development for residential and commercial PV system applications, where...... the inverter’s own monitoring and communication capabilities. We also aim to lower the implementation cost, by using a simple, but accurate performance monitoring approach, and show the practical issues that can arise when implementing such a system....

  2. Development of a Real-Time Radiological Area Monitoring Network for Emergency Response at Lawrence Livermore National Laboratory

    International Nuclear Information System (INIS)

    Bertoldo, N; Hunter, S; Fertig, R; Laguna, G; MacQueen, D

    2004-01-01

    A real-time radiological sensor network for emergency response was developed and deployed at the Lawrence Livermore National Laboratory (LLNL). The Real-Time Radiological Area Monitoring (RTRAM) network is comprised of 16 Geiger-Mueller (GM) sensors positioned on the LLNL Livermore site perimeter to continuously monitor for a radiological condition resulting from a terrorist threat to site security and the health and safety of LLNL personnel. The RTRAM network sensor locations coincide with wind sector directions to provide thorough coverage of the one square mile site. These loW--power sensors are supported by a central command center (CCC) and transmit measurement data back to the CCC computer through the LLNL telecommunications infrastructure. Alarm conditions are identified by comparing current data to predetermined threshold parameters and are validated by comparison with plausible dispersion modeling scenarios and prevailing meteorological conditions. Emergency response personnel are notified of alarm conditions by automatic radio and computer based notifications. A secure intranet provides emergency response personnel with current condition assessment data that enable them to direct field response efforts remotely. The RTRAM network has proven to be a reliable system since initial deployment in August 2001 and maintains stability during inclement weather conditions

  3. Development of an Adaptable Monitoring Package for Marine Renewable Energy Projects Part II: Hydrodynamic Performance

    OpenAIRE

    Joslin, James; Rush, Ben; Stewart, Andrew; Polagye, Brian

    2014-01-01

    The Adaptable Monitoring Package (AMP), along with a remotely operated vehicle (ROV) and custom tool skid, is being developed to support near-field (≤10 meters) monitoring of hydrokinetic energy converters. The AMP is intended to support a wide range of environmental monitoring in harsh oceanographic conditions, at a cost in line with other aspects of technology demonstrations. This paper, which is the second in a two part series, covers the hydrodynamic analysis of the AMP and deployment ROV...

  4. Integrated Monitoring System (IMS) development and demonstration activities: summary of POTAS Task E. 45

    Energy Technology Data Exchange (ETDEWEB)

    Fienning, W.C.; McKnight, R.P.

    1986-04-01

    The development of the Integrated Monitoring System, which monitors the shipment of spent fuel from light water reactors to reactor or away-from-reactor storage sites, is described. The system uses a crane location monitor and gamma radiation detectors to determine the arrival or departure of spent fuel loaded in shipping casks. The system records the information in a tamper-detecting, tamper-resistant enclosure for later inspection and triggers a camera for photographic assessment of anomalies.

  5. Development of a Low-Cost Particulate Matter Monitor

    Energy Technology Data Exchange (ETDEWEB)

    White, Richard M.; Apte, Michael G.; Gundel, Lara A.; Black, Justin

    2008-08-01

    We describe a small, inexpensive portable monitor for airborne particulates, composed of the following elements: a. A simple size-selective inlet (vertical elutriator) that permits only particles below a pre-set diameter to pass and enter the measurement section; b. A measurement section in which passing particles are deposited thermophoretically on a micro-fabricated resonant piezoelectric mass sensor; c. An optical characterization module co-located with the mass sensor module that directs infrared and ultraviolet beams through the deposit. The emergent optical beams are detected by a photodiode. The optical absorption of the deposit can be measured in order to characterize the deposit, and determine how much is due to diesel exhaust and/or environmental tobacco smoke; and d. A small pump that moves air through the device, which may also be operated in a passive mode. The component modules were designed by the project team, and fabricated at UCB andLBNL. Testing and validation were performed in a room-sized environmental chamber at LBNL in to which was added either environmental tobacco smoke (ETS, produced by a cigarette smoking machine) or diesel exhaust (from a conventional diesel engine). Two pilot field tests in a dwelling compared the monitor with existing aerosol instruments during exposure to infiltrated ambient air to which cigarette smoke, diesel exhaust, wood smoke and cooking fumes were added. The limit of detection (LOD) derived from statistical analysis of field data is 18 mu g m-3, at the 99percent confidence level. The monitor weighs less than 120 g and has a volume of roughly 250 cm3. Power consumption is approximately 100 milliwatts. During this study, the optical component of the device was not fully implemented and has been left for future efforts. Suggested improvements in the current prototype include use of integrated thermal correction, reconfiguration of the resonator for increased particle collection area, increased thermophoretic

  6. A new respiratory rate monitor: development and initial clinical experience

    DEFF Research Database (Denmark)

    Hök, B; Wiklund, L; Henneberg, S

    1993-01-01

    different kinds of interference, including motion artefacts. The sensor is nonexpensive, rugged, simple to apply and inherently safe. An instrument with continuous display of respiratory rate, and an audiovisual apnea alarm has been designed and built. The complete system has been tested on patients during......The need for continuous, noninvasive, and reliable respiratory rate monitoring during recovery from general anesthesia has long been recognized. Alternative principles can be grouped into those detecting the respiratory effort, and those detecting the actual result, i.e. the respiratory gas flow...... recovery after general anesthesia. In 16 patients, the respiratory rate displayed by the instrument has been correlated against that visually observed. A good correlation was obtained. Minor discrepancies can be explained from the fact that visual observation corresponds to the respiratory effort, whereas...

  7. Development and Flight Demonstration of Space Debris Monitor (SDM)

    Science.gov (United States)

    Kitazawa, Yukihito; Hanada, Toshiya; Matsumoto, Haruhisa; Kobayashi, Masanori; Sakurai, Akira; Yasaka, Tetsuo; Funakoshi, Kunihiro; Hasegawa, Sunao; Akahoshi, Yasuhiro; Kimoto, Yugo; Okudaira, Osamu; Kamiya, Koki; Nakamura, Maki

    2016-07-01

    The space debris monitor (SDM) is a large-area impact sensor for in situ measurements of micro-meteoroids and space debris of the sub-millimeter to millimeter size in the near-Earth space environment. These meteoroid and debris particles are very small to be detected by ground-based observations (radars and optical telescopes) but are sufficiently large to cause serious damage to spacecraft equipment in the low Earth orbit region. The nominal detection area of the SDM is 0.1 m^2 (0.35 m × 0.3 m), but its dimensions can be easily modified to accommodate different SDM constraints. The SDM is made from a flexible printed circuit, which is produced from a thin film of a nonconductive material (such as polyimide) on which thin conductive stripes are formed in parallel. The stripe width is approximately 50 μm, and the spatial separation is approximately 100 μm, as shown in Figure 1. When a micro-debris particle with an effective diameter near to or larger than the spatial separation of the stripes (here approximately 100 μm) collides with the sensor film at a velocity sufficient to penetrate it, one or more of the stripes are cut and become nonconductive. Debris impacts can thus be detected by monitoring the electrical conductivity (resistivity) of the stripes. This sensor system can measure the size of the incident micro-debris particles by detecting the number of severed stripes. The measurement concept is registered as a patent in many countries. The first SDM was launched with HTV-5 on August 19, 2015 and represented the world's first micro-debris measurement demonstration experiment to be conducted on the ISS using the concept of conductive (resistive) strip lines for real-time debris detection.

  8. Development of slew-rate-limited time-over-threshold (ToT) ASIC for a multi-channel silicon-based ion detector

    Science.gov (United States)

    Uenomachi, M.; Orita, T.; Shimazoe, K.; Takahashi, H.; Ikeda, H.; Tsujita, K.; Sekiba, D.

    2018-01-01

    High-resolution Elastic Recoil Detection Analysis (HERDA), which consists of a 90o sector magnetic spectrometer and a position-sensitive detector (PSD), is a method of quantitative hydrogen analysis. In order to increase sensitivity, a HERDA system using a multi-channel silicon-based ion detector has been developed. Here, as a parallel and fast readout circuit from a multi-channel silicon-based ion detector, a slew-rate-limited time-over-threshold (ToT) application-specific integrated circuit (ASIC) was designed, and a new slew-rate-limited ToT method is proposed. The designed ASIC has 48 channels and each channel consists of a preamplifier, a slew-rate-limited shaping amplifier, which makes ToT response linear, and a comparator. The measured equivalent noise charges (ENCs) of the preamplifier, the shaper, and the ToT on no detector capacitance were 253±21, 343±46, and 560±56 electrons RMS, respectively. The spectra from a 241Am source measured using a slew-rate-limited ToT ASIC are also reported.

  9. Research and Development of Information and Communication Technology-based Home Blood Pressure Monitoring from Morning to Nocturnal Hypertension.

    Science.gov (United States)

    Kario, Kazuomi; Tomitani, Naoko; Matsumoto, Yuri; Hamasaki, Haruna; Okawara, Yukie; Kondo, Maiko; Nozue, Ryoko; Yamagata, Hiromi; Okura, Ayako; Hoshide, Satoshi

    2016-01-01

    Asians have specific characteristics of hypertension (HTN) and its relationship with cardiovascular disease. The morning surge in blood pressure (BP) in Asians is more extended, and the association slope between higher BP and the risk for cardiovascular events is steeper in this population than in whites. Thus, 24-hour BP control including at night and in the morning is especially important for Asian patients with HTN. There are 3 components of "perfect 24-hour BP control": the 24-hour BP level, adequate dipping of nocturnal BP (dipper type), and adequate BP variability such as the morning BP surge. The morning BP-guided approach using home BP monitoring (HBPM) is the first step toward perfect 24-hour BP control. After controlling morning HTN, nocturnal HTN is the second target. We have been developing HBPM that can measure nocturnal BP. First, we developed a semiautomatic HBPM device with the function of automatic fixed-interval BP measurement during sleep. In the J-HOP (Japan Morning Surge Home Blood Pressure) study, the largest nationwide home BP cohort, we successfully measured nocturnal home BP using this device with data memory, 3 times during sleep (2, 3, and 4 am), and found that nocturnal home BP is significantly correlated with organ damage independently of office and morning BP values. The second advance was the development of trigger nocturnal BP (TNP) monitoring with an added trigger function that initiates BP measurements when oxygen desaturation falls below a variable threshold continuously monitored by pulse oximetry. TNP can detect the specific nocturnal BP surges triggered by hypoxic episodes in patients with sleep apnea syndrome. We also added the lowest heart rate-trigger function to TNP to detect the "basal nocturnal BP," which is determined by the circulating volume and structural cardiovascular system without any increase in sympathetic tonus. This double TNP is a novel concept for evaluating the pathogenic pressor mechanism of nocturnal BP

  10. Software system development of NPP plant DiD risk monitor. Basic design of software configuration

    International Nuclear Information System (INIS)

    Yoshikawa, Hidekazu; Nakagawa, Takashi

    2015-01-01

    A new risk monitor system is under development which can be applied not only to prevent severe accident in daily operation but also to serve as to mitigate the radiological hazard just after severe accident happens and long term management of post-severe accident consequences. The fundamental method for the new risk monitor system is first given on how to configure the Plant Defense in-Depth (DiD) Risk Monitor by object-oriented software system based on functional modeling approach. In this paper, software system for the plant DiD risk monitor is newly developed by object oriented method utilizing Unified Modeling Language (UML). Usage of the developed DiD risk monitor is also introduced by showing examples for LOCA case of AP1000. (author)

  11. Towards development of a deposition monitoring network for air pollution of Europe

    NARCIS (Netherlands)

    Erisman JW; Mennen MG; Fowler D; Flechard CR; Spindler G; Gruner A; Duyzer JH; Ruigrok W; Wyers GP; LLO; TNO; ECN; ITE (Engeland); IFT (Duitsland)

    1996-01-01

    In January 1993 within the framework of the LIFE programme a project was financed which aim was to develop a deposition monitoring method for air pollution of Europe. This method should be used to extend existing European monitoring networks of air concentrations to provide deposition inputs on an

  12. Measuring social media activities of Dutch museums. : Developing a social media monitor.

    NARCIS (Netherlands)

    Rogier Brussee; Drs Erik Hekman; Thijs Waardenburg

    2014-01-01

    In this paper we discuss the general approach and choices we made in developing a prototype of a social media monitor. The main goal of the museum monitor is to offer museum professionals and researchers better insight in the effects of their own social media usage and compare this with other actors

  13. Development of a SMAP-Based Drought Monitoring Product

    Science.gov (United States)

    Sadri, S.; Wood, E. F.; Pan, M.; Lettenmaier, D. P.

    2016-12-01

    Agricultural drought is defined as a deficit in the amount of soil moisture over a prolonged period of time. Soil moisture information over time and space provides critical insight for agricultural management, including both water availability for crops and moisture conditions that affect management practices such as fertilizer, pesticide applications, and their impact as non-point pollution runoff. Since April of 2015, NASA's Soil Moisture Active Passive (SMAP) mission has retrieved soil moisture using L-band passive radiometric measurements at a 8 day repeat orbit with a swath of 1000 km that maps the Earth in 2-3 days depending on locations. Of particular interest to SMAP-based agricultural applications is a monitoring product that assesses the SMAP soil moisture in terms of probability percentiles for dry (drought) or wet (pluvial) conditions. SMAP observations do result in retrievals that are spatially and temporally discontinuous. Additionally, the short SMAP record length provides a statistical challenge in estimating a drought index and thus drought risk evaluations. In this presentation, we describe a SMAP drought index for the CONUS region based on near-surface soil moisture percentiles. Because the length of the SMAP data record is limited, we use a Bayesian conditional probability approach to extend the SMAP record back to 1979 based on simulated soil moisture of the same period from the Variable Infiltration Capacity (VIC) Land Surface Model (LSM), simulated by Princeton University. This is feasible because the VIC top soil layer (10 cm) is highly correlated with the SMAP 36 km passive microwave during 2015-2016, with more than half the CONUS grids having a cross-correlation greater than 0.6, and over 0.9 in many regions. Given the extended SMAP record, we construct an empirical probability distribution of near-surface soil moisture drought index showing severities similar to those used by the U.S. Drought Monitor (from D0-D4), for a specific SMAP

  14. The application and development on radiation monitoring microcomputer management system in design of a certain project

    International Nuclear Information System (INIS)

    Zhang Hongyou

    1993-01-01

    A scheme of a radiation monitoring system with a RMMMS (Radiation Monitoring Microcomputer Management System) has been designed for the first time in the radiation protection design of a certain nuclear projection undertaken by the BINE (Beijing Institute of Nuclear Engineering). Meanwhile, we accepted the research task of the RMMMS that can manage 40 monitoring channel. The key factors of radiation monitors, microcomputer, information management and systematic design method are considered in the development of the RMMMS. This paper presents briefly the scheme and functions of the RMMMS

  15. Technology of Measuring equipment for Air Pollution. Development of Mobile Air Pollution monitoring system (LIDAR)

    Energy Technology Data Exchange (ETDEWEB)

    Cha, Hyung Ki; Song, Ky Seok; Rhee, Young Joo; Kim, Duck Hyun; Yang, Ki Ho; Lee, Jong Min; Cha, Byung Heon; Lee, Kang Soo

    1999-01-01

    Most air pollution monitoring technologies accompany a time-consuming sample treatment process and provides pollution information only for a local area. Thus, they have a critical restriction in monitoring time-dependent pollution variation effectively over the wide range of area both in height and in width. LIDAR (Light detection and ranging) is a new technology to overcome such drawbacks of the existing pollution monitoring technologies and has long been investigated in the advanced countries. The goal of this project is to develop the mobile air pollution monitoring system and to apply the system to the detection of various pollutants, such as ozone, nitrogen dioxide, sulfur dioxide and aerosols.

  16. Technology of Measuring equipment for Air Pollution. Development of Mobile Air Pollution monitoring system (LIDAR)

    International Nuclear Information System (INIS)

    Cha, Hyung Ki; Song, Ky Seok; Rhee, Young Joo; Kim, Duck Hyun; Yang, Ki Ho; Lee, Jong Min; Cha, Byung Heon; Lee, Kang Soo

    1999-01-01

    Most air pollution monitoring technologies accompany a time-consuming sample treatment process and provides pollution information only for a local area. Thus, they have a critical restriction in monitoring time-dependent pollution variation effectively over the wide range of area both in height and in width. LIDAR (Light detection and ranging) is a new technology to overcome such drawbacks of the existing pollution monitoring technologies and has long been investigated in the advanced countries. The goal of this project is to develop the mobile air pollution monitoring system and to apply the system to the detection of various pollutants, such as ozone, nitrogen dioxide, sulfur dioxide and aerosols

  17. INFORMATION SYSTEM OF AIRPORT NETWORK DEVELOPMENT MONITORING FORMATION

    Directory of Open Access Journals (Sweden)

    Oleg Smirnov

    2015-07-01

    Full Text Available The article analyzes the approaches to the development of information system in public administration of this important branch of transport civil aviation. In particular, it is shown that the application of algorithmic elements allows to increase the objectivity and transparency when making decisions regarding the regulation of development of the airport network.

  18. Developing a yeast-based assay protocol to monitor total ...

    African Journals Online (AJOL)

    A yeast-based assay protocol developed for detecting oestrogenic activity in activated sludge (AS) supernatant is described. The protocol used Saccharomyces cerevisiae construct RMY/ER-ERE with human oestrogen receptor (ERα) and lacZ reporter genes, and was developed by modifying existing assays for use with AS ...

  19. Hydrodynamics of sediment threshold

    Science.gov (United States)

    Ali, Sk Zeeshan; Dey, Subhasish

    2016-07-01

    A novel hydrodynamic model for the threshold of cohesionless sediment particle motion under a steady unidirectional streamflow is presented. The hydrodynamic forces (drag and lift) acting on a solitary sediment particle resting over a closely packed bed formed by the identical sediment particles are the primary motivating forces. The drag force comprises of the form drag and form induced drag. The lift force includes the Saffman lift, Magnus lift, centrifugal lift, and turbulent lift. The points of action of the force system are appropriately obtained, for the first time, from the basics of micro-mechanics. The sediment threshold is envisioned as the rolling mode, which is the plausible mode to initiate a particle motion on the bed. The moment balance of the force system on the solitary particle about the pivoting point of rolling yields the governing equation. The conditions of sediment threshold under the hydraulically smooth, transitional, and rough flow regimes are examined. The effects of velocity fluctuations are addressed by applying the statistical theory of turbulence. This study shows that for a hindrance coefficient of 0.3, the threshold curve (threshold Shields parameter versus shear Reynolds number) has an excellent agreement with the experimental data of uniform sediments. However, most of the experimental data are bounded by the upper and lower limiting threshold curves, corresponding to the hindrance coefficients of 0.2 and 0.4, respectively. The threshold curve of this study is compared with those of previous researchers. The present model also agrees satisfactorily with the experimental data of nonuniform sediments.

  20. Research and Development for the Mu2e Extinction Monitor

    International Nuclear Information System (INIS)

    Mott, Casey Benjamin

    2016-01-01

    Mu2e is a planned experiment to search for flavor-violating conversion from a muon to an electron. The experiment will use a pulsed 8 GeV proton beam to produce muons which will then stop in an aluminum target. Mu2e will search for the μ - + Al → e - + Al process. For Mu2e, an extinction rate of 10 -10 is required to reduce the backgrounds to an acceptable level. Extinction is the ratio of the amount of protons striking the production target between beam pulses to the number striking it during the beam pulse. One of the backgrounds, off-target interactions, was simulated using G4beamline and Fermilab's Grid setup to confirm that an extinction rate of 10 -10 is possible. The extinction level will be measured by the extinction monitor which will include scintillation counters read out by photomultiplier tubes. In order to build a beam time profile, low fake responses (after pulses) are needed in the photomultiplier tubes. This thesis determines the best combination of resistors, voltage, and other components that provide the lowest after pulse rate.

  1. Research and Development for the Mu2e Extinction Monitor

    Energy Technology Data Exchange (ETDEWEB)

    Mott, Casey Benjamin [Northern Illinois U.

    2016-01-01

    Mu2e is a planned experiment to search for flavor-violating conversion from a muon to an electron. The experiment will use a pulsed 8 GeV proton beam to produce muons which will then stop in an aluminum target. Mu2e will search for the $\\mu^- + Al \\rightarrow e^- + Al$ process. For Mu2e, an extinction rate of 10$^{-10}$ is required to reduce the backgrounds to an acceptable level. Extinction is the ratio of the amount of protons striking the production target between beam pulses to the number striking it during the beam pulse. One of the backgrounds, off-target interactions, was simulated using G4beamline and Fermilab's Grid setup to confirm that an extinction rate of 10$^{-10}$ is possible. The extinction level will be measured by the extinction monitor which will include scintillation counters read out by photomultiplier tubes. In order to build a beam time profile, low fake responses (after pulses) are needed in the photomultiplier tubes. This thesis determines the best combination of resistors, voltage, and other components that provide the lowest after pulse rate.

  2. Development of NPP Monitoring and Operation Support Technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jung Woon; Park, Jae Chang; Lee, Yong Hee [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)] (and others)

    2008-04-15

    During the first stage (2001.7.1-2004.6.30), we developed general human factors design guidelines VDU-based workstations, PMAS alarm display design guidelines, PMAS SPADES display design guidelines, and the revision of KHNP HFE guidelines (HF-010), which have been applied to domestic NPP designs. We also supported other KNICS projects by performing RPS COM design reviews, development of RPS COM Style Guide, and a review of CEDMCS cabinet operator module display design. We developed the ADIOS prototype, NPP performance analysis systems for YGN No.1, 2 plants and Kori No. 2 plant, alarm cause tracking systems for Kori No. 2 plant and OPR1000, and signal fault detection and diagnosis methods for deaerators and steam generators. During the second stage(2004.7.1-2008.4.30), we supported other KNICS projects by reviewing RPS COM display designs three times, developing ESF-CCS COM style guides and reviewing ESF-CCS COM display design, reviewing CRCS LOM and PCS MTP display designs, and developing requirements for DCS GUI components. We also developed integrated style guide for I and C cabinet operator module display designs. In cooperative research with KOPEC-AE, we developed basic technologies for advanced HSI design including task analysis methods, an information and control requirements database, display design criteria, a HSI prototype with its evaluation, and methods for human factors engineering verification and validation.

  3. Development of NPP Monitoring and Operation Support Technology

    International Nuclear Information System (INIS)

    Lee, Jung Woon; Park, Jae Chang; Lee, Yong Hee

    2008-04-01

    During the first stage (2001.7.1-2004.6.30), we developed general human factors design guidelines VDU-based workstations, PMAS alarm display design guidelines, PMAS SPADES display design guidelines, and the revision of KHNP HFE guidelines (HF-010), which have been applied to domestic NPP designs. We also supported other KNICS projects by performing RPS COM design reviews, development of RPS COM Style Guide, and a review of CEDMCS cabinet operator module display design. We developed the ADIOS prototype, NPP performance analysis systems for YGN No.1, 2 plants and Kori No. 2 plant, alarm cause tracking systems for Kori No. 2 plant and OPR1000, and signal fault detection and diagnosis methods for deaerators and steam generators. During the second stage(2004.7.1-2008.4.30), we supported other KNICS projects by reviewing RPS COM display designs three times, developing ESF-CCS COM style guides and reviewing ESF-CCS COM display design, reviewing CRCS LOM and PCS MTP display designs, and developing requirements for DCS GUI components. We also developed integrated style guide for I and C cabinet operator module display designs. In cooperative research with KOPEC-AE, we developed basic technologies for advanced HSI design including task analysis methods, an information and control requirements database, display design criteria, a HSI prototype with its evaluation, and methods for human factors engineering verification and validation

  4. Influenza surveillance in Europe: establishing epidemic thresholds by the Moving Epidemic Method

    Science.gov (United States)

    Vega, Tomás; Lozano, Jose Eugenio; Meerhoff, Tamara; Snacken, René; Mott, Joshua; Ortiz de Lejarazu, Raul; Nunes, Baltazar

    2012-01-01

    Please cite this paper as: Vega et al. (2012) Influenza surveillance in Europe: establishing epidemic thresholds by the moving epidemic method. Influenza and Other Respiratory Viruses 7(4), 546–558. Background  Timely influenza surveillance is important to monitor influenza epidemics. Objectives  (i) To calculate the epidemic threshold for influenza‐like illness (ILI) and acute respiratory infections (ARI) in 19 countries, as well as the thresholds for different levels of intensity. (ii) To evaluate the performance of these thresholds. Methods  The moving epidemic method (MEM) has been developed to determine the baseline influenza activity and an epidemic threshold. False alerts, detection lags and timeliness of the detection of epidemics were calculated. The performance was evaluated using a cross‐validation procedure. Results  The overall sensitivity of the MEM threshold was 71·8% and the specificity was 95·5%. The median of the timeliness was 1 week (range: 0–4·5). Conclusions  The method produced a robust and specific signal to detect influenza epidemics. The good balance between the sensitivity and specificity of the epidemic threshold to detect seasonal epidemics and avoid false alerts has advantages for public health purposes. This method may serve as standard to define the start of the annual influenza epidemic in countries in Europe. PMID:22897919

  5. Essential variables help to focus sustainable development goals monitoring

    CSIR Research Space (South Africa)

    Reyers, B

    2017-06-01

    Full Text Available The imperative to measure progress towards Sustainable Development Goals (SDGs) has resulted in a proliferation of targets and indicators fed by an ever-expanding set of observations. This proliferation undermines one principal purpose of the SDGs...

  6. Instrumentation to Monitor Transient Developing Periodic Flow in Newtonian Slurries

    Energy Technology Data Exchange (ETDEWEB)

    Bamberger, Judith A.; Enderlin, Carl W.

    2014-08-03

    This paper describes measurement techniques developed and applied to characterize solids mobilization and mixing of Newtonian slurries that are subjected to transient, periodic, developing flows. Metrics to characterize mobilization and mixing are the just suspended velocity (UJS) and the cloud height (HC). Two ultrasonic instruments to characterize pulse jet mixing of slurries were developed and deployed to measure related metrics: the thickness of the settled bed (used to determine mobilization) and the concentration within the cloud as a function of elevation [C(Z)]. A second method, continuous sample extraction, characterization, and reinsertion was successfully used to measure average density and characterize the concentration within the cloud. Testing focused on mixing vessels using intermitent jet mixers oriented vertically downward. Descriptions of the instruments and instrument performance are presented. These techniques were an effective approach to characterize mixing phenomena, determine mixing energy required to fully mobilize vessel contents, and to determine mixing times for process evaluation.

  7. Tunable Laser Development for In-flight OFDR Structural Health Monitoring Systems

    Data.gov (United States)

    National Aeronautics and Space Administration — Development of a cost-effective, robust, tunable, miniaturized, ruggedized, and flight tested swept laser for in-flight structural health monitoring, based on the...

  8. From drought indicators to impacts: developing improved tools for monitoring and early warning with decision-makers in mind

    Science.gov (United States)

    Hannaford, Jamie; Barker, Lucy; Svensson, Cecilia; Tanguy, Maliko; Laize, Cedric; Bachmair, Sophie; Tijdeman, Erik; Stahl, Kerstin; Collins, Kevin

    2016-04-01

    Droughts pose a threat to water security in most climate zones and water use sectors. With projections suggesting that droughts will intensify in many parts of the globe, the magnitude of this threat is likely to increase in the future and thus vulnerability of society to drought must be reduced through better preparedness. While the occurrence of drought cannot be prevented in the short term, a number of actions can be taken to reduce vulnerability. Monitoring and early warning (M&EW) systems are often central to drought management strategies aimed at reducing vulnerability, but they are generally less developed than for other hazards. There are many drought indicators available for characterising the hazard but they have only rarely been tested for their ability to capture observed impacts on society or the environment. There is a pressing need to better integrate the physical and social vulnerability elements of drought to improve M&EW systems. The Belmont Forum project DrIVER (Drought Impacts: Vulnerability thresholds in monitoring and Early-warning Research, 2014 - 2016) aims to fill this gap by strengthening the link between natural (hydrometeorological) drought characterisation and ecological and socio-economic impacts on three continents (North America, Europe and Australia). The UK is a key DrIVER case study area. The UK has a well-developed hydrological monitoring programme, but there is currently no national drought focused M&EW system; different actors (water companies, regulators, farmers or industry) typically conduct M&EW for their own particular purposes. In this paper we present the early outcomes of an extensive programme of research designed to provide a scientific foundation for improved M&EW systems for the UK in future. The UK is used here as an example, and the findings could prove useful for other localities seeking to develop M&EW systems. Firstly, we present the results of stakeholder engagement exercises designed to ascertain current use

  9. Remotely Accessible Instrumented Monitoring of Global Development Programs: Technology Development and Validation

    Directory of Open Access Journals (Sweden)

    Michael Fleming

    2013-08-01

    Full Text Available Many global development agencies self-report their project outcomes, often relying on subjective data that is collected sporadically and communicated months later. These reports often highlight successes and downplay challenges. Instrumented monitoring via distributed data collection platforms may provide crucial evidence to help inform the sector and public on the effectiveness of aid, and the on-going challenges. This paper presents the process of designing and validating an integrated sensor platform with cellular-to-internet reporting purposely targeted at global development programs. The integrated hardware platform has been applied to water, sanitation, energy and infrastructure interventions and validated through laboratory calibration and field observations. Presented here are two examples: a water pump and a household water filter, wherein field observations agreed with the data algorithm with a linear fit slope of between 0.91 and 1, and an r-squared of between 0.36 and 0.39, indicating a wide confidence interval but with low overall error (i.e., less than 0.5% in the case of structured field observations of water volume added to a household water filter and few false negatives or false positives.

  10. Developing a Comprehensive Near-Earth Object Monitoring Plattform

    Science.gov (United States)

    Greenspon, J.

    Currently, a global skywatch program has aided in the detection of hundreds of Earth-orbit crossing objects over the past two decades. The next logical step in the protection of Earth from extra -terrestrial impact (as well as close encounters) is to remove the monitoring complex from the interference. The reasons are very simple and practical. First, the costs of maintaining a remote orbital complex will be no more costly than the current independent outlays for the skywatch programs currently in place. Second, due to the absence of terrestrial interference, there will be a greater ability to determine objects in solar orbits, regardless of their Earth-crossing natures. Third, the tasks which need to be done within an orbital platform can be remotely controlled, with a 24 hour operational capability, and Fourth, far fewer orbital facilities are necessary to sustain the research than are currently in operation at ground level. In order to accomplish this task, only four things are critically necessary: Resources - The skywatch program (as well as our proposed SpaceWatch platform) uses common optical and radiometric study methods. There are varied obstacles to the use of each type of means, ranging from atmospheric diffraction to terrestrial interference. In an orbital location, we are freed from a variety of limiting factors. Unfortunately, we are restricted by a few new ones. Power - Orbital locations provide an abundance of freely available power - solar power. By locating the "SpaceWatch" program to orbit, we can adaptively upgrade or realign operations priorities by modular means - upgrading power and resources as necessary. Planning - One of the crucial endeavours for the SpaceWatch platform will be verifying and validating the current listings in the Skywatch program. Aside from actively seeking out new threats, a portion of the operational time will necessarily be devoted to reviewing objects from the present list, and aiding in other space

  11. Development of NORM determination Algorithm for Radiation Portal Monitors

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jin Hwan; Kim, Ye Won; Yoo, Hyun Jun; Kim, Chan Kyu; Lee, Sang Heon; Cho, Gyu Seong [KAERI, Daejeon (Korea, Republic of)

    2016-05-15

    In this paper, probability of distinguishing nuclide analysis is proposed by measuring compton energy spectrum of gamma ray with large-area PVT scintillator to solve fundamental problem. US coast guard (USCG) suggested the methods for which terrorism could be prevented to international maritime organization (IMO) and the bill in which container safety was assured was suggested by U.S customs officials. However, radiation portal monitors (RPMs) running at the airport and the harbor cannot distinguish special cargo material (SNM) from naturally occurring radioactive materials (NOMR) containing a small dose of radioisotope from nature. Consequently, cargo sorted out by RPM using polyvinyl-toluene (PVT) scintillator contains approximately 99% of NORM (such as cat litter, potash, tableware and etc.) Many research institutes are under way to reduce such a nuisance alarm. Tom Burr conducted pattern recognition methods with extracted 184 features (46 features from each of four panels) from 235 profiles out of 406 profiles representing gamma alarm. But this method is more like statistical analysis using the data of low and high gamma than practical nuclide analysis. So it has limitation to reduce nuisance alarm. Regarding to the experimental result for difference distances between the source and the scintillator using large-area PVT based plastic scintillator, the linearity was not secured when the distance is from 0cm to 20cm. It is expected that, for these cases, the scintillation areas in which photon is emitted were small. The distance between PMTs and these areas was too far to detect every emitted photon because the photons were attenuated by plastic scintillator. Because of this reason, energy spectra were shifted to relatively lower channel. While, no more spectrum shifting occurred for 50cm and 100cm. It is considered that the increase of the gamma source solid angle makes scintillation area larger and no more spectrum shifting occur. With this experiment, it was

  12. Usefulness of acute phase proteins for monitoring development of ...

    African Journals Online (AJOL)

    Background: Serum levels of acute phase proteins (APP) have been used to diagnose and follow up treatment of liver diseases. This study was carried out to determine the usefulness of APP to predict development of hepatocellular carcinoma (HCC) among Hepatitis B virus (HBV) carriers. Study design: In a prospective ...

  13. Development of a component centered fault monitoring and diagnosis knowledge based system for space power system

    Science.gov (United States)

    Lee, S. C.; Lollar, Louis F.

    1988-01-01

    The overall approach currently being taken in the development of AMPERES (Autonomously Managed Power System Extendable Real-time Expert System), a knowledge-based expert system for fault monitoring and diagnosis of space power systems, is discussed. The system architecture, knowledge representation, and fault monitoring and diagnosis strategy are examined. A 'component-centered' approach developed in this project is described. Critical issues requiring further study are identified.

  14. Raynaud's syndrome in children: systematic review and development of recommendations for assessment and monitoring

    OpenAIRE

    Pain, C. E.; Constantine, T.; Toplak, N.; Moll, M.; Iking-Konert, C.; Piotto, D. P.; Ayaz, N. Aktay; Nemcova, D.; Hoeger, P. H.; Cutolo, M.; Smith, Vanessa; Foeldvari, I.

    2016-01-01

    Objective. To develop recommendations for investigation and monitoring of children with Raynaud's syndrome, based on paediatric evidence collated by a systematic review. Method. A systematic review was undertaken to establish the paediatric evidence for assessment and monitoring of Raynaud's syndrome. An expert panel including members of the Paediatric Rheumatology European Society (PRES) Scleroderma Working Group, were invited to a consensus meeting where recommendations were developed based...

  15. The development of android - based children's nutritional status monitoring system

    Science.gov (United States)

    Suryanto, Agus; Paramita, Octavianti; Pribadi, Feddy Setio

    2017-03-01

    The calculation of BMI (Body Mass Index) is one of the methods to calculate the nutritional status of a person. The BMI calculation has not yet widely understood and known by the public. In addition, people should know the importance of progress in the development of child nutrition each month. Therefore, an application to determine the nutritional status of children based on Android was developed in this study. This study restricted the calculation for children with the age of 0-60 months. The application can run on a smartphone or tablet PC with android operating system due to the rapid development of a smartphone or tablet PC with android operating system and many people own and use it. The aim of this study was to produce a android app to calculate of nutritional status of children. This study was Research and Development (R & D), with a design approach using experimental studies. The steps in this study included analyzing the formula of the Body Mass Index (BMI) and developing the initial application with the help of a computer that includes the design and manufacture of display using Eclipse software. This study resulted in android application that can be used to calculate the nutritional status of children with the age 0-60 months. The results of MES or the error calculation analysis using body mass index formula was 0. In addition, the results of MAPE percentage was 0%. It shows that there is no error in the calculation of the application based on the BMI formula. The smaller value of MSE and MAPE leads to higher level of accuracy.

  16. Development of a remote monitoring and control system for nuclear power plants

    International Nuclear Information System (INIS)

    Lee, Seung Jun; Kim, Jong Hyun; Seong, Poong Hyun

    2002-01-01

    Nuclear Power Plants (NPPs) will be highly connected network enabled system and need to be monitored and controlled round the clock for high safety and availability. Using the network and web enabled tools, NPPs can be monitored remotely by operators at anytime from any place connected to the network via a general web browser. However, there are security and performance issues associated with such tools, as will be further discussed further. We developed a web-based Remote Monitoring and Control System (RMCS) that uses prevalent web technology. This work, as a preliminary study, performed the conceptual design of the web-based RMCS and developed the prototype

  17. Development of plastic scintillator based food radioactivity contamination monitoring system

    International Nuclear Information System (INIS)

    Parihar, A.; Sahani, R.M.; Mahala, V.K.; Vaijapurkar, S.G.

    2016-01-01

    Radioactivity is naturally present in soil, water and food stuffs. Food can be contaminated after discharge of radioactivity into the environment from industries that concentrate natural radionuclide and from civil or military nuclear operations. The contamination can be in three ways; by direct deposition, through the food chain and induced radioactivity due to exposure of high neutron flux. The health effects on human depend on the type of radionuclide and the length of time people are exposed to it. The studies of fission product behaviour in the food chain have revealed radionuclide Strontium-90, Caesium 137 and Iodine-131 are of major concern. Plastic scintillator is already developed indigenously at Defence Laboratory, Jodhpur. Efforts has been made to develop a portable field instrument using plastic scintillator for assessment of beta ( 90 Sr) and gamma ( 137 Cs and 131 I) radioactivity in food

  18. Development of multimedia computer-based training for VXI integrated fuel monitors

    International Nuclear Information System (INIS)

    Keeffe, R.; Ellacott, T.; Truong, Q.S.

    1999-01-01

    The Canadian Safeguards Support Program has developed the VXI Integrated Fuel Monitor (VFIM) which is based on the international VXI instrument bus standard. This equipment is a generic radiation monitor which can be used in an integrated mode where several detection systems can be connected to a common system where information is collected, displayed, and analyzed via a virtual control panel with the aid of computers, trackball and computer monitor. The equipment can also be used in an autonomous mode as a portable radiation monitor with a very low power consumption. The equipment has been described at previous international symposia. Integration of several monitoring systems (bundle counter, core discharge monitor, and yes/no monitor) has been carried out at Wolsong 2. Performance results from one of the monitoring systems which was installed at CANDU nuclear stations are discussed in a companion paper at this symposium. This paper describes the development of an effective multimedia computer-based training package for the primary users of the equipment; namely IAEA inspectors and technicians. (author)

  19. Development of the national register of radiation workers: subsystem for individual monitoring of external exposure

    International Nuclear Information System (INIS)

    Yu Haitao; Niu Haowei; Sun Quanfu; Fu Yinghua; Fan Yaohua; Yue Baorong

    2010-01-01

    Objective: To develop a national registry and reporting system of individual monitoring for workers occupationally exposed to ionizing radiation. Methods: In accordance with the relevant law, regulations, standards and the current health supervision practice for radiation workers in China, to ensure more effective collection of information on individual monitoring from all levels of service providers across the country and an easy query and analysis of the collected information for both service providers and administrative institutions, the register consisted of an offline-system and a web-based information system. The off-line system consisted of 8 tables, which could easily make annual and period monitoring reports, and upload individual monitoring data in compressed and encrypted format. Web-based system consisted of 6 modules, could easily make S customized tabulations of monitoring data and show 2 trend figures. SSLVPN secure remote access was used in the system. Arranged by the Ministry of Health, training courses provided to all individual monitoring service providers and provincial administrative institutions. Results: A new and individual-based national register and reporting system of individual monitoring for workers occupationally exposed to ionizing radiation was successfully developed, and would be officially run soon. Conclusions: The establishment and running of the register would be great improvement on the national radiological health reports and produce a far-reaching impact on the individual monitoring in China. (authors)

  20. Development of Interactive Monitoring System for Neutron Scattering Instrument

    International Nuclear Information System (INIS)

    So, Ji Yong

    2015-01-01

    Neutron scattering instruments in HANARO research reactor have been contributed to various fields of basic science and material engineering. These instruments are open to publics and researchers can apply beam-time and do experiments with instrument scientists. In most cases, these instruments run for several weeks without stopping, and therefore instrument scientist wants to see the instrument status and receive information if the instruments have some problem. This is important for the safety. However, it is very hard to get instrument information outside of instruments. Access from external site is strongly forbidden in the institute due to the network safety, I developed another way to send instrument status information using commercial short messaging service(SMS). In this presentation, detailed features of this system will be shown. As a prototype, this system is being developed for the single instrument: Disk-chopper time-of-flight instruments (DC-TOF). I have successfully developed instruments and operate for several years. This information messaging system can be used for other neutron scattering instruments

  1. Streamlining information flow and improving the system of indicators of socio-economic monitoring of regional development

    Directory of Open Access Journals (Sweden)

    Pakulina Alevtyna

    2016-02-01

    Full Text Available The article is devoted to the development of proposals to streamline information flows and improve the system of indicators of social-economic monitoring of regional development. The author reveals the essence of the socio-economic monitoring of the territory development. Socio-economic monitoring is considered as the factor of increasing the efficiency of economy and complex development of the territory. The proposals on optimization of the process of monitoring of the country are scientifically grounded

  2. Hadron production near threshold

    Indian Academy of Sciences (India)

    Final state interaction effects in → + and → 3He reactions are explored near threshold to study the sensitivity of the cross-sections to the potential and the scattering matrix. The final state scattering wave functions between and and and 3He are described rigorously. The production is ...

  3. Elaborating on Threshold Concepts

    Science.gov (United States)

    Rountree, Janet; Robins, Anthony; Rountree, Nathan

    2013-01-01

    We propose an expanded definition of Threshold Concepts (TCs) that requires the successful acquisition and internalisation not only of knowledge, but also its practical elaboration in the domains of applied strategies and mental models. This richer definition allows us to clarify the relationship between TCs and Fundamental Ideas, and to account…

  4. Boundaries, Thresholds, and Consequences.

    Science.gov (United States)

    Smith, Carl R.

    1997-01-01

    Highlights issues in the debate concerning Individuals with Disabilities Education Act (IDEA) special education legislation as it relates to student discipline and incarcerated juveniles. Focuses on assessment issues and thresholds for diagnosable conditions. Looks at debates surrounding IDEA and some of the consequences of new legislation. (RJM)

  5. Basic study on development of monitoring for crack propagation

    International Nuclear Information System (INIS)

    Enoki, Manabu; Kishi, Teruo; Kawasaki, Hirotsugu; Aoto, Kazumi

    2000-03-01

    The system for detecting the generation and propagation of cracks in products and materials has been investigated in this research. Firstly, in order to apply the method to harsh environment such as plant equipment, the system with laser interferometer which cables to detect fracture in non-contact way was tried. It was confirmed that the heterodyne interferometer with He-Ne laser could detect elastic waves propagating through materials, and the non-contact system with four interferometers to detect acoustic emission (AE) wave was developed. It was applied to the thermal stress fracture in alumina coating materials. AE wave during cooling of specimens due to microfracture near the interfaces was detected and the generation time, location, size and fracture mode could be evaluated by the inverse analysis. Thus, the quantitative system for evaluating AE wave was developed and the validity of this system was confirmed. Secondly, in order to predict the crack initiation, the detection tests which were performed to detect a change in damage in the pre-stage of micro crack initiation were tried. For the components that were subject to transient cyclic thermal loading changes, the ultrasonic detection test was performed, and the obtained echo was analyzed. Furthermore, the measurement of micro hardness was performed by using the micro hardness tester for the grain boundary at near crack. The ultrasound velocity which could detect damaged state before crack initiation was estimated from the wavelet analysis of ultrasonic echoes obtained here. It was confirmed to be possible to predict the crack initiation from the change of micro hardness on the grain boundary. (author)

  6. Experience with the custom-developed ATLAS Offline Trigger Monitoring Framework and Reprocessing Infrastructure

    CERN Document Server

    Bartsch, V

    2012-01-01

    After about two years of data taking with the ATLAS detector manifold experience with the custom-developed trigger monitoring and reprocessing infrastructure could be collected. The trigger monitoring can be roughly divided into online and offline monitoring. The online monitoring calculates and displays all rates at every level of the trigger and evaluates up to 3000 data quality histograms. The physics analysis relevant data quality information is being checked and recorded automatically. The offline trigger monitoring provides information depending of the physics motivated different trigger streams after a run has finished. Experts are checking the information being guided by the assessment of algorithms checking the current histograms with a reference. The experts are recording their assessment in a so-called data quality defects which are used to select data for physics analysis. In the first half of 2011 about three percent of all data had an intolerable defect resulting from the ATLAS trigger system. T...

  7. Development of a high-resolution electron-beam profile monitor using Fresnel zone plates

    International Nuclear Information System (INIS)

    Nakamura, Norio; Sakai, Hiroshi; Muto, Toshiya; Hayano, Hitoshi

    2004-01-01

    We present a high-resolution and real-time beam profile monitor using Fresnel zone plates (FZPs) developed in the KEK-ATF damping ring. The monitor system has an X-ray imaging optics with two FZPs. In this monitor, the synchrotron radiation from the electron beam at the bending magnet is monochromatized by a crystal monochromator and the transverse electron beam image is twenty-times magnified by the two FZPs and detected on an X-ray CCD camera. The expected spatial resolution for the selected photon energy of 3.235 keV is less than 1 μm. With the beam profile monitor, we succeeded in obtaining a clear electron-beam image and measuring the extremely small beam size less than 10 μm. It is greatly expected that the beam profile monitor will be used in high-brilliance light sources and low-emittance accelerators. (author)

  8. Development of Short-term Molecular Thresholds to Predict Long-term Mouse Liver Tumor Outcomes: Phthalate Case StudyTo be

    Science.gov (United States)

    Molecular Thresholds for Early Key Events in Liver Tumorgensis: PhthalateCase StudyTriangleShort-term changes in molecular profiles are a central component of strategies to model health effects of environmental chemicals such as phthalates, for which there is widespread human exp...

  9. Development of beam monitoring system for proton pencil beam scanning using fiber-optic radiation sensor

    Science.gov (United States)

    Son, Jaeman; Koo, Jihye; Moon, Sunyoung; Yoon, Myonggeun; Jeong, Jonghwi; Kim, Sun-Young; Lim, Youngkyung; Lee, Se Byeong; Shin, Dongho; Kim, Meyoung; Kim, Dongwook

    2017-10-01

    We aimed to develop a beam monitoring system based on a fiber-optic radiation sensor (FORS), which can be used in real time in a beam control room, to monitor a beam in proton therapy, where patients are treated using a pencil beam scanning (PBS) mode, by measuring the beam spot width (BSW) and beam spot position (BSP) of the PBS. We developed two-dimensional detector arrays to monitor the PBS beam in the beam control room. We measured the BSW for five energies of the PBS beam and compared the measurements with those of Lynx and EBT3 film. In order to confirm the BSP, we compared the BSP values of the PBS calculated from radiation treatment planning (RTP), to five BSP values measured using FORS at 224.2 MeV. When comparing BSW values obtained using developed monitoring system to the measurements obtained using commercial EBT3 film, the average difference in BSW value of the PBS beam was 0.1 ± 0.1 mm. In the comparison of BSW values with the measurements obtained using Lynx, the average difference was 0.2 ± 0.1 mm. When comparing BSP measurements to the values calculated from RTP, the average difference was 0.4 ± 0.2 mm. The study results confirmed that the developed FORS-based beam monitoring system can monitor a PBS beam in real time in a beam control room, where proton beam is controlled for the patient.

  10. Development of a longitudinal density monitor for storage rings

    International Nuclear Information System (INIS)

    Zolotorev, M.; Beche, J.-F.; Byrd, J.; Datte, P.; De Santis, S.; Denes, P.; Placidi, M.; Ratti, A.; Riot, V.; Schoenlein, R.; Turner, W.

    2003-01-01

    We report on development of a new storage ring operations tool for measurement of longitudinal beam density profile. The technique mixes synchrotron light with light from a mode locked solid-state laser oscillator in a non-linear crystal and detects the up-converted radiation with a photo-multiplier. The laser is phase locked to the storage ring RF system. The laser choices available for repetition frequency, pulse length and phase modulation give a very wide range of options for matching the bunch configuration of particular storage rings. Progress in the technology of solid-state lasers ensures this system can be made robust for routine use in storage ring operations. A very large number of important applications are possible including measurement of the fraction of untrapped particles prior to acceleration, the population of particles in the nominally unfilled RF buckets in a bunch train (''ghost bunches''), longitudinal tails, the diffusion of particles into the beam abort gap and th e normal bunch parameters of longitudinal shape and intensity. We are currently investigating application to two devices: (1) the 1.9 GeV ALS electron storage ring at LBNL with 328 RF buckets, 2ns bucket spacing, 276 nominally filled bunches, 15-30ps rms bunch length and (2) the 7 TeV LHC proton collider under construction at CERN with 35,640 RF buckets, 2.5 ns bucket spacing, 2,808 nominally filled bunches, 280-620 ps rms bunch length. A proof of principle experiment is being conducted on ALS. The results of the ALS experiment and detailed analyses of the application to LHC and its requirements are described

  11. Developing a monitoring program for invertebrates: guidelines and a case study.

    Science.gov (United States)

    Rohr, Jason R; Mahan, Carolyn G; Kim, Ke Chung

    2007-04-01

    Invertebrates provide the majority of ecosystem services; thus, it is important that they be inventoried, monitored, and protected. Nevertheless, inventories, monitoring, and management generally focus on vertebrates and flowering plants. Consequently, there are few guidelines or case studies for invertebrates. We present a procedure for developing a monitoring program for species-rich invertebrates that entails (1) characterizing the community; (2) identifying surrogates for biodiversity; and (3) establishing efficient methods to monitor surrogates and any ecologically important or sensitive taxa. We used these procedures, biodiversity-based statistical advances, and a survey of arthropods to develop a monitoring plan for the forests of Shenandoah National Park, Virginia (U.S.A.). Our case study revealed that mixed hardwood and hemlock forests had significantly different compositions of arthropods in their soil and understory strata. Of the 10 orders tested Coleoptera and Hymenoptera were the only two to pass most of the five surrogate tests, and their combination improved predictions of overall arthropod diversity. Because arthropods represent the majority of macroscopic species in most ecosystems, the ability of this assemblage to predict overall arthropod diversity makes it a powerful surrogate. Of the 11 collecting methods used, the beat-sheet method was the most efficient for monitoring this surrogate assemblage. To complement this coarse-filter approach to monitoring at-risk, invasive, or other important taxa (fine filter), we used ordination analyses to match 66 taxa with the methods that most effectively sampled them. Our methods serve as a model for developing an invertebrate monitoring plan and should facilitate linking such monitoring with ecosystem functions and management.

  12. Developing an Integrated Monitoring and Evaluation Flow for Sustainable Investment Projects

    Directory of Open Access Journals (Sweden)

    Florin TACHE

    2011-12-01

    Full Text Available Under the circumstances of certain weaknesses in the monitoring and evaluation processes of sustainable investment projects, the paper aims to develop a general integrated flow, encompassing both a project monitoring system and also a project evaluation system for the investment projects involving economic objectives, as well as cross-cutting social and environmental targets. The whole approach is being presented as a flowchart, which highlights the intimate relationship between the monitoring and evaluation processes, and provides a formal framework for performing a logical monitoring and evaluation process, taking into account simultaneously the economic, social and environmental perspectives, within an investment project. Last, but not least, the article states both the estimated advantages and the disadvantages of such a managerial tool, opening new perspectives for developing further improved models and systems.

  13. Developing an effective adaptive monitoring network to support integrated coastal management in a multiuser nature reserve

    Directory of Open Access Journals (Sweden)

    Pim Vugteveen

    2015-03-01

    Full Text Available We elaborate the necessary conceptual and strategic elements for developing an effective adaptive monitoring network to support Integrated Coastal Management (ICM in a multiuser nature reserve in the Dutch Wadden Sea Region. We discuss quality criteria and enabling actions essential to accomplish and sustain monitoring excellence to support ICM. The Wadden Sea Long-Term Ecosystem Research project (WaLTER was initiated to develop an adaptive monitoring network and online data portal to better understand and support ICM in the Dutch Wadden Sea Region. Our comprehensive approach integrates ecological and socioeconomic data and links research-driven and policy-driven monitoring for system analysis using indicators of pressures, state, benefits, and responses. The approach and concepts we elaborated are transferable to other coastal regions to accomplish ICM in complex social-ecological systems in which scientists, multisectoral stakeholders, resource managers, and governmental representatives seek to balance long-term ecological, economic, and social objectives within natural limits.

  14. Development and Application of On-line Monitor for the ZLW-1 Axis Cracks

    Science.gov (United States)

    Shi-jun, Yang; Qian-hui, Yang; Jian-guo, Jin

    2018-03-01

    This article mainly introduces a method that uses acoustic emission techniques to achieve on-line monitor for the shaft cracks and crack growth. According to this method, axis crack monitor is produced by acoustic emission techniques. This instrument can apply to all the pressure vessels, pipelines and rotor machines that can bear buckling load. It has the online real-time monitoring, automatic recording, printing, sound and light alarm, collecting crack information function. After a series of tests in both laboratory and field, it shows that this instrument is very versatile and possesses broad prospects of development and application.

  15. Development of ship structure health monitoring system based on IOT technology

    Science.gov (United States)

    Yang, Sujun; Shi, Lei; Chen, Demin; Dong, Yuqing; Hu, Zhenyi

    2017-06-01

    It is very important to monitor the ship structure, because ships are affected by all kinds of wind wave and current environment factor. At the same time, internet of things (IOT) technology plays more and more important role of in the development of industrial process. In the paper, real-time online monitoring of the ship can be realized by means of IOT technology. Ship stress, vibration and dynamic parameters are measured. Meanwhile, data is transmitted to remote monitoring system through intelligent data gateway. Timely remote support can be realized for dangerous stage of ship. Safe navigation of ships is guaranteed through application of the system.

  16. Market Monitor, development of the wholesale trade market of electricity 2006. Results

    International Nuclear Information System (INIS)

    Vermeulen, M.; Mulder, M.; Van den Reek, W.; Thomeer, G.; De Kleijn, M.

    2007-12-01

    The Office of Energy Regulation carries out its legal task by means of a monitor, a practical tool to assess and analyze the wholesale market for electricity. Monitoring of the wholesale electricity market concerns continuous, accurate and structured following of developments in the market. The aim is to identify in time signals from the market that could lead to a decrease of competition and transparency. The starting point of the monitor for the wholesale electricity market is the selection of indicators which give insight in real competition, liquidity and transparency [nl

  17. Radar rainfall estimation for the identification of debris-flow precipitation thresholds

    Science.gov (United States)

    Marra, Francesco; Nikolopoulos, Efthymios I.; Creutin, Jean-Dominique; Borga, Marco

    2014-05-01

    Identification of rainfall thresholds for the prediction of debris-flow occurrence is a common approach for warning procedures. Traditionally the debris-flow triggering rainfall is derived from the closest available raingauge. However, the spatial and temporal variability of intense rainfall on mountainous areas, where debris flows take place, may lead to large uncertainty in point-based estimates. Nikolopoulos et al. (2014) have shown that this uncertainty translates into a systematic underestimation of the rainfall thresholds, leading to a step degradation of the performances of the rainfall threshold for identification of debris flows occurrence under operational conditions. A potential solution to this limitation lies on use of rainfall estimates from weather radar. Thanks to their high spatial and temporal resolutions, these estimates offer the advantage of providing rainfall information over the actual debris flow location. The aim of this study is to analyze the value of radar precipitation estimations for the identification of debris flow precipitation thresholds. Seven rainfall events that triggered debris flows in the Adige river basin (Eastern Italian Alps) are analyzed using data from a dense raingauge network and a C-Band weather radar. Radar data are elaborated by using a set of correction algorithms specifically developed for weather radar rainfall application in mountainous areas. Rainfall thresholds for the triggering of debris flows are identified in the form of average intensity-duration power law curves using a frequentist approach by using both radar rainfall estimates and raingauge data. Sampling uncertainty associated to the derivation of the thresholds is assessed by using a bootstrap technique (Peruccacci et al. 2012). Results show that radar-based rainfall thresholds are largely exceeding those obtained by using raingauge data. Moreover, the differences between the two thresholds may be related to the spatial characteristics (i.e., spatial

  18. Developing monitoring capability of a volcano observatory: the example of the Vanuatu Geohazards Observatory

    Science.gov (United States)

    Todman, S.; Garaebiti, E.; Jolly, G. E.; Sherburn, S.; Scott, B.; Jolly, A. D.; Fournier, N.; Miller, C. A.

    2010-12-01

    Vanuatu lies on the Pacific 'Ring of Fire'. With 6 active subaerial and 3 submarine (identified so far) volcanoes, monitoring and following up their activities is a considerable work for a national observatory. The Vanuatu Geohazards Observatory is a good example of what can be done from ‘scratch’ to develop a volcanic monitoring capability in a short space of time. A fire in June 2007 completely destroyed the old observatory building and many valuable records leaving Vanuatu with no volcano monitoring capacity. This situation forced the Government of Vanuatu to reconsider the structure of the hazards monitoring group and think about the best way to rebuild a complete volcano monitoring system. Taking the opportunity of the re-awakening of Gaua volcano (North of Vanuatu), the Vanuatu Geohazards section in partnership with GNS Science, New Zealand developed a new program including a strategic plan for Geohazards from 2010-2020, the installation of a portable seismic network with real-time data transmission in Gaua, the support of the first permanent monitoring station installation in Ambrym and the design and implementation of volcano monitoring infrastructure and protocol. Moreover the technology improvements of the last decade and the quick extension of enhanced communication systems across the islands of Vanuatu played a very important role for the development of this program. In less than one year, the implementation of this program was beyond expectations and showed considerable improvement of the Vanuatu Geohazards Observatory volcano monitoring capability. In response to increased volcanic activity (or unrest) in Ambae, the Geohazards section was fully capable of the installation of a portable seismic station in April 2010 and to follow the development of the activity. Ultimately, this increased capability results in better and timelier delivery of information and advice on the threat from volcanic activity to the National Disaster Management Office and

  19. Design and Development of Gas Leakage Monitoring System Using Arduino and ZigBee

    OpenAIRE

    Yan, Huan Hui; Rahayu, Yusnita

    2014-01-01

    Gas leakage in industrial area causes many health issues. Thus, to prevent such disasters happen, the atmosphere of a workplace should be regularly monitored and controlled, in order to maintain the clean air environment. However, efforts in industrial air quality control have been impeded by the lack of science-based approaches to identify and assess atmosphere air quality and level of dangerous gas. Therefore, a monitoring system for gas leakage detection needs to be developed. For the deve...

  20. Development and evaluation of a new method for sampling and monitoring the symphylid population in pineapple

    OpenAIRE

    Soler, A.; Gaude, J. M.; Marie-Alphonsine, P. A.; Vinatier, F.; Dole, B.; Govindin, J. C.; Fournier, P.; Quénéhervé, Patrick

    2011-01-01

    BACKGROUND: Symphylids (Hanseniella sp.) are polyphagous soilborne parasites. Today, symphylid populations on pineapple are monitored by observing root symptoms and the presence of symphylids at the bottom of basal leaves. The authors developed a reliable method with a bait and trap device to monitor symphylid populations in pineapple or fallow crops. The spatial distribution of the symphylid populations was evaluated using the variance/mean ratios and spatial analyses based on Moran's and Ge...

  1. Stroke rehabilitation reaches a threshold.

    Directory of Open Access Journals (Sweden)

    Cheol E Han

    2008-08-01

    Full Text Available Motor training with the upper limb affected by stroke partially reverses the loss of cortical representation after lesion and has been proposed to increase spontaneous arm use. Moreover, repeated attempts to use the affected hand in daily activities create a form of practice that can potentially lead to further improvement in motor performance. We thus hypothesized that if motor retraining after stroke increases spontaneous arm use sufficiently, then the patient will enter a virtuous circle in which spontaneous arm use and motor performance reinforce each other. In contrast, if the dose of therapy is not sufficient to bring spontaneous use above threshold, then performance will not increase and the patient will further develop compensatory strategies with the less affected hand. To refine this hypothesis, we developed a computational model of bilateral hand use in arm reaching to study the interactions between adaptive decision making and motor relearning after motor cortex lesion. The model contains a left and a right motor cortex, each controlling the opposite arm, and a single action choice module. The action choice module learns, via reinforcement learning, the value of using each arm for reaching in specific directions. Each motor cortex uses a neural population code to specify the initial direction along which the contralateral hand moves towards a target. The motor cortex learns to minimize directional errors and to maximize neuronal activity for each movement. The derived learning rule accounts for the reversal of the loss of cortical representation after rehabilitation and the increase of this loss after stroke with insufficient rehabilitation. Further, our model exhibits nonlinear and bistable behavior: if natural recovery, motor training, or both, brings performance above a certain threshold, then training can be stopped, as the repeated spontaneous arm use provides a form of motor learning that further bootstraps performance and

  2. Requirements for developing a regional monitoring capacity for aerosols in Europe within EMEP.

    Science.gov (United States)

    Kahnert, Michael; Lazaridis, Mihalis; Tsyro, Svetlana; Torseth, Kjetil

    2004-07-01

    The European Monitoring and Evaluation Programme (EMEP) has been established to provide information to Parties to the Convention on Long Range Transboundary Air Pollution on deposition and concentration of air pollutants, as well as on the quantity and significance of long-range transmission of pollutants and transboundary fluxes. To achieve its objectives with the required scientific credibility and technical underpinning, a close integration of the programme's main elements is performed. These elements are emission inventories, chemical transport modelling, and the monitoring of atmospheric chemistry and deposition fluxes, which further are integrated towards abatement policy development. A critical element is the air pollution monitoring that is performed across Europe with a focus not only on health effect aspects and compliance monitoring, but also on process studies and source receptor relationships. Without a strong observational basis a predictive modelling capacity cannot be developed and validated. Thus the modelling success strongly depends on the quality and quantity of available observations. Particulate matter (PM) is a relatively recent addition to the EMEP monitoring programme, and the network for PM mass observations is still evolving. This article presents the current status of EMEP aerosol observations, followed by a critical evaluation in view of EMEP's main objectives and its model development requirements. Specific recommendations are given for improving the PM monitoring programme within EMEP.

  3. Hadron production near threshold

    Indian Academy of Sciences (India)

    Abstract. Final state interaction effects in pp → pΛK+ and pd → 3He η reactions are explored near threshold to study the sensitivity of the cross-sections to the pΛ potential and the ηN scattering matrix. The final state scattering wave functions between Λ and p and η and 3He are described rigorously. The Λ production is ...

  4. A Regional Approach to Wildlife Monitoring Related to Energy Exploration and Development in Colorado

    Science.gov (United States)

    Kotliar, Natasha B.; Bowen, Zachary H.; Ouren, Douglas S.; Farmer, Adrian H.

    2008-01-01

    The U.S. Bureau of Land Management (BLM) is currently developing a National Monitoring Strategy that will guide efforts to create an efficient and effective process for monitoring land health by BLM. To inform the ongoing development of the national strategy, BLM selected two States (Colorado, Alaska) to serve as focal areas on which to base a flexible framework for developing monitoring programs that evaluate wildlife responses to energy development. We developed a three-phase monitoring plan to serve as a template and applied it to the design of a monitoring program for the Colorado focal area (White River and Glenwood Springs Field Offices of the BLM). Phase I is a synthesis and assessment of current conditions that capitalizes on existing but under used data sources. A key component is the use of existing habitat and landscape models to evaluate the cumulative effects of surface disturbance. Phase II is the data collection process that uses information provided in Phase I to refine management objectives and provide a linkage to management decisions. The linkage is established through targeted monitoring, adaptive management, and research. Phase III establishes priorities and strategies for regional and national monitoring, and facilitates coordination among other land management agencies and organizations. The three phases are designed to be flexible and complementary. The monitoring plan guides an iterative process that is performed incrementally, beginning with the highest-priority species and management issues, while building on lessons learned and coordination among administrative levels. The activities associated with each phase can be repeated or updated as new information, data, or tools become available. This allows the development of a monitoring program that expands gradually and allows for rapid implementation. A demonstration application of the three-phase monitoring plan was conducted for a study area encompassing five BLM field offices in Colorado

  5. Ten-year prediction of osteoporosis from baseline bone mineral density: development of prognostic thresholds in healthy postmenopausal women. The Danish Osteoporosis Prevention Study

    DEFF Research Database (Denmark)

    Abrahamsen, Bo; Rejnmark, Lars; Nielsen, Stig Pors

    2006-01-01

    Osteopenia is common in healthy women examined in the first year or two following menopause. Short-term fracture risk is low, but we lack algorithms to assess long-term risk of osteoporosis. Because bone loss proceeds at only a few percent per year, we speculated that baseline bone mineral density...... (BMD) would predict a large proportion of 10-year BMD and be useful for deriving predictive thresholds. We aimed to identify prognostic thresholds associated with less than 10% risk of osteoporosis by 10 years in the individual participant, in order to allow rational osteodensitometry and intervention....... We analyzed dual energy X-ray absorptometry (DXA) of the lumbar spine (LS) and femoral neck (FN) from 872 women, who participated in the non-HRT arms of the Danish Osteoporosis Prevention Study and had remained on no HRT, bisphosphonates or raloxifene since inclusion 10 years ago. We defined...

  6. Ten-year prediction of osteoporosis from baseline bone mineral density: development of prognostic thresholds in healthy postmenopausal women. The Danish Osteoporosis Prevention Study

    DEFF Research Database (Denmark)

    Abrahamsen, Bo; Rejnmark, Lars; Nielsen, Stig Pors

    2006-01-01

    Osteopenia is common in healthy women examined in the first year or two following menopause. Short-term fracture risk is low, but we lack algorithms to assess long-term risk of osteoporosis. Because bone loss proceeds at only a few percent per year, we speculated that baseline bone mineral density....... We analyzed dual energy X-ray absorptometry (DXA) of the lumbar spine (LS) and femoral neck (FN) from 872 women, who participated in the non-HRT arms of the Danish Osteoporosis Prevention Study and had remained on no HRT, bisphosphonates or raloxifene since inclusion 10 years ago. We defined...... (BMD) would predict a large proportion of 10-year BMD and be useful for deriving predictive thresholds. We aimed to identify prognostic thresholds associated with less than 10% risk of osteoporosis by 10 years in the individual participant, in order to allow rational osteodensitometry and intervention...

  7. Using iKidTools™ Software Support Systems to Develop and Implement Self-Monitoring Interventions

    Science.gov (United States)

    Patti, Angela L.; Miller, Kevin J.

    2011-01-01

    Educational teams often are faced with the task of developing and implementing Behavioral Intervention Plans (BIPs) for students who present challenging and/or disruptive behaviors. This article describes the steps used to develop and implement a self-monitoring BIP that incorporated an innovative software system, iKidTools™. An authentic case…

  8. EPA-developed, patented technologies related to water monitoring and remediation that are available for licensing

    Science.gov (United States)

    Under the Federal Technology Transfer Act (FTTA), Federal Agencies can patent inventions developed during the course of research. These technologies can then be licensed to businesses or individuals for further development and sale in the marketplace. These technologies relate to water monitoring and treatment technologies.

  9. Development of a high sensitivity monitor for radionuclides characterization. Final report, August 1995--April 1996

    International Nuclear Information System (INIS)

    1996-06-01

    This report describes the development of a high sensitivity monitor for radiation, and the feasibility of applying a new radiation imaging concept developed for medical research to soil contamination. The concept utilizes sensors with storage photostimulable phosphor technology as radiation detectors. They are applicable to all types of radiation including tritium

  10. Development of a high sensitivity monitor for radionuclides characterization. Final report, August 1995--April 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-06-01

    This report describes the development of a high sensitivity monitor for radiation, and the feasibility of applying a new radiation imaging concept developed for medical research to soil contamination. The concept utilizes sensors with storage photostimulable phosphor technology as radiation detectors. They are applicable to all types of radiation including tritium.

  11. Development of the Nation-Wide Dosimetric Monitoring Network in Ukraine

    International Nuclear Information System (INIS)

    Chumak, V.; Boguslavskaya, A.; Musijachenko, A.

    2004-01-01

    Development of the nation-wide network for monitoring and registration of individual doses is being in progress in Ukraine. The need for urgent action is caused by the fact, that despite wide use of nuclear energy and radiation sources in industry and medicine, there is no centralized dose accounting system in Ukraine, existing dosimetry services operate obsolete manual TLD readers and no methodological unity is observed by the dosimetry services. Presently the mixed dosimetric monitoring is practiced in Ukraine. Nuclear power plants and some major nuclear facilities have their own dosimetry services responsible for dosimetric monitoring of workers. Rest of occupationally exposed persons is monitored by territorial dosimetry laboratories affiliated to sanitary and epidemiology supervision bodies. In total these services cover about 38,000 occupationally exposed workers, including 5,500 in medicine, 16,400 employees of five nuclear power plants and about 16,000 workers dealing with other sources of occupational exposure (industry, research, military). It is prescribed by the governmental decree that three-level united state system assigned to covering all aspects of efficient dosimetric monitoring should be established. The tasks of the system, in particular, are: securing methodical unity of individual dosimetric monitoring; scientific and methodological guidance of individual dosimetric control; procurement of common technical policy regarding nomenclature and operation of instrumentation; implementation of quality assurance programs; development and support of information infrastructure for logging, storage and access to data on individual dosimetric monitoring, in particular - keeping the national registry of individual doses; training and certification of personnel engaged in the system of individual dosimetric monitoring. In its development, the national system will be guided by international experience and will be established according to the best practices

  12. Development of mediator-type biosensor to wirelessly monitor whole cholesterol concentration in fish.

    Science.gov (United States)

    Takase, Mai; Murata, Masataka; Hibi, Kyoko; Huifeng, Ren; Endo, Hideaki

    2014-04-01

    We developed a wireless monitoring system to monitor fish condition by tracking the change in whole cholesterol concentration. The whole cholesterol concentration of fish is a source of steroid hormones or indicator of immunity level, which makes its detection important for tracking physiological condition of fish. Wireless monitoring system comprises of mediator-type biosensor and wireless transmission device. Biosensor is implantable to fish body, and transmission device is so light, in that fish is allowed to swim freely during monitoring. Cholesterol esterase and oxidase were fixated on to the detection site of biosensor and used to detect the whole cholesterol concentration. However, cholesterol oxidase incorporates oxidation-reduction reaction of oxygen for detection, which concentration fluctuates easily due to change in environmental condition. Meanwhile, mediator-type biosensor enables monitoring of whole cholesterol concentration by using mediator to substitute that oxidation-reduction reaction of oxygen. Characteristic of fabricated mediator-type biosensor was tested. The sensor output current of mediator-type biosensor remained stable compared to output current of non-mediator-type biosensor under fluctuating oxygen concentration of 0-8 ppm, which implied that this sensor is less affected by change in dissolved oxygen concentration. That biosensor was then implanted into fish for wireless monitoring. As a result, approximately 48 h of real-time monitoring was successful.

  13. Statistical Algorithm for the Adaptation of Detection Thresholds

    DEFF Research Database (Denmark)

    Stotsky, Alexander A.

    2008-01-01

    Many event detection mechanisms in spark ignition automotive engines are based on the comparison of the engine signals to the detection threshold values. Different signal qualities for new and aged engines necessitate the development of an adaptation algorithm for the detection thresholds...... remains constant regardless of engine age and changing detection threshold values. This, in turn, guarantees the same event detection performance for new and aged engines/sensors. Adaptation of the engine knock detection threshold is given as an example. Udgivelsesdato: 2008...

  14. The development of the operational program for seismic monitoring system of Uljin Unit 1 and 2

    Energy Technology Data Exchange (ETDEWEB)

    Lee, J.R.; Heo, T.Y.; Cho, B.H. [Korea Electric Power Research Institute, Taejeon (Korea, Republic of); Kang, T.G.; Kim, H.M.; Kim, Y.S.; Oh, S.M.; Kang, Y.S. [Korea Electric Power Data Network Co., Seoul (Korea, Republic of)

    1997-12-31

    Due to aging of the imported seismic monitoring system of Uljin of t 1 and 2 units it is difficult for this system to provide enough functions needed for the security of seismic safety and the evaluation of the earthquake data from the seismic instrumentation. For this reason, it is necessary to replace the seismic monitoring system of Uljin 1 and 2 units with a new system which has the localized and upgraded hardware and corresponding software. In the part of standardization of existing seismic monitoring system, furthermore, it is necessary to develop the seismic wave analysis system which incorporate newly developed software and can real-timely analyze the seismic wave. This report is the finial product of research project ``The development of the operational program for seismic monitoring system of Uljin Unit 1 and 2`` which have been performed from June 1996 to June 1997 by KEPRI and KDN. Main accomplishments - Review of regulatory criteria for seismic monitoring system -Analysis and upgrade of hardware system -Analysis and upgrade of software system - Development of seismic wave analysis system. (author). 17 refs., 49 figs., 6 tabs.

  15. Development of a central PC-based system for reactor signal monitoring and analysis

    International Nuclear Information System (INIS)

    Karim, A.; Ansari, S.A.; Rauf Baig, A.

    1998-01-01

    A personal computer based system was developed for on-line monitoring, signal processing and display of important reactor parameters of the Pakistan Research Reactor-1. The system was designed for assistance to both reactor operator and users. It performs three main functions. The first is the centralized radiation monitoring in and around the reactor building. The computer acquires signals from radiation monitoring channels and continuously displays them on distributed monitors. Trend monitoring and alarm generation is also done. In case of any abnormal condition the radiation level data is automatically stored in computer memory for detailed off-line analysis. In the second part the computer does the performance testing of nuclear instrumentation channels by signal statistical analysis, and generates alarm in case the channel standard deviation error exceeds the permissible error. Mean values of important nuclear signals are also displayed on distributed monitors as a part of reactor safety parameters display system. The third function is on-line computation of reactor physics parameters of the core which are important from operational and safety points-of-view. The signals from radiation protection system and nuclear instrumentation channels in the reactor were interfaced with the computer for this purpose. The development work was done under an IAEA research contract as a part of coordinated research programme. (author)

  16. Development of Uncertainty Analysis Method for SMART Digital Core Protection and Monitoring System

    International Nuclear Information System (INIS)

    Koo, Bon Seung; In, Wang Kee; Hwang, Dae Hyun

    2012-01-01

    The Korea Atomic Energy Research Institute has developed a system-integrated modular advanced reactor (SMART) for a seawater desalination and electricity generation. Online digital core protection and monitoring systems, called SCOPS and SCOMS respectively were developed. SCOPS calculates minimum DNBR and maximum LPD based on the several online measured system parameters. SCOMS calculates the variables of limiting conditions for operation. KAERI developed overall uncertainty analysis methodology which is used statistically combining uncertainty components of SMART core protection and monitoring system. By applying overall uncertainty factors in on-line SCOPS/SCOMS calculation, calculated LPD and DNBR are conservative with a 95/95 probability/confidence level. In this paper, uncertainty analysis method is described for SMART core protection and monitoring system

  17. [Development of mobile monitor for risk factor control on chronic disease].

    Science.gov (United States)

    Yao, Danhua; Zhu, Chaoyang; Bao, Jiali

    2013-11-01

    In order to improve the control rate of risk factors of chronic disease, it is developed a status control method of risk factor and its mobile monitor. The monitor uses 32 bit RISC microprocessor of S3C2410X as a controller based on ARM920T core, and MC35i cellular engine GSM/GPRS supported by SIEMENS as the communication unit. The proving tests show that the physical activity, diet, smoking and alcohol of the controlled people can be controlled using the status control method, and the monitor plays a key role in the method. The conclusion is that status control method and mobile monitor can become an alternation method and technology for the risk factor control of chronic disease.

  18. [The Development of Information Centralization and Management Integration System for Monitors Based on Wireless Sensor Network].

    Science.gov (United States)

    Xu, Xiu; Zhang, Honglei; Li, Yiming; Li, Bin

    2015-07-01

    Developed the information centralization and management integration system for monitors of different brands and models with wireless sensor network technologies such as wireless location and wireless communication, based on the existing wireless network. With adaptive implementation and low cost, the system which possesses the advantages of real-time, efficiency and elaboration is able to collect status and data of the monitors, locate the monitors, and provide services with web server, video server and locating server via local network. Using an intranet computer, the clinical and device management staffs can access the status and parameters of monitors. Applications of this system provide convenience and save human resource for clinical departments, as well as promote the efficiency, accuracy and elaboration for the device management. The successful achievement of this system provides solution for integrated and elaborated management of the mobile devices including ventilator and infusion pump.

  19. Functionality enhancement of industrialized optical fiber sensors and system developed for full-scale pavement monitoring.

    Science.gov (United States)

    Wang, Huaping; Liu, Wanqiu; He, Jianping; Xing, Xiaoying; Cao, Dandan; Gao, Xipeng; Hao, Xiaowei; Cheng, Hongwei; Zhou, Zhi

    2014-05-19

    Pavements always play a predominant role in transportation. Health monitoring of pavements is becoming more and more significant, as frequently suffering from cracks, rutting, and slippage renders them prematurely out of service. Effective and reliable sensing elements are thus in high demand to make prognosis on the mechanical properties and occurrence of damage to pavements. Therefore, in this paper, various types of functionality enhancement of industrialized optical fiber sensors for pavement monitoring are developed, with the corresponding operational principles clarified in theory and the performance double checked by basic experiments. Furthermore, a self-healing optical fiber sensing network system is adopted to accomplish full-scale monitoring of pavements. The application of optical fiber sensors assembly and self-healing network system in pavement has been carried out to validate the feasibility. It has been proved that the research in this article provides a valuable method and meaningful guidance for the integrity monitoring of civil structures, especially pavements.

  20. Development of a Model Specification for Performance MonitoringSystems for Commercial Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Haves, Philip; Hitchcock, Robert J.; Gillespie, Kenneth L.; Brook, Martha; Shockman, Christine; Deringer, Joseph J.; Kinney,Kristopher L.

    2006-08-01

    The paper describes the development of a model specification for performance monitoring systems for commercial buildings. The specification focuses on four key aspects of performance monitoring: (1) performance metrics; (2) measurement system requirements; (3) data acquisition and archiving; and (4) data visualization and reporting. The aim is to assist building owners in specifying the extensions to their control systems that are required to provide building operators with the information needed to operate their buildings more efficiently and to provide automated diagnostic tools with the information required to detect and diagnose faults and problems that degrade energy performance. The paper reviews the potential benefits of performance monitoring, describes the specification guide and discusses briefly the ways in which it could be implemented. A prototype advanced visualization tool is also described, along with its application to performance monitoring. The paper concludes with a description of the ways in which the specification and the visualization tool are being disseminated and deployed.

  1. Functionality Enhancement of Industrialized Optical Fiber Sensors and System Developed for Full-Scale Pavement Monitoring

    Directory of Open Access Journals (Sweden)

    Huaping Wang

    2014-05-01

    Full Text Available Pavements always play a predominant role in transportation. Health monitoring of pavements is becoming more and more significant, as frequently suffering from cracks, rutting, and slippage renders them prematurely out of service. Effective and reliable sensing elements are thus in high demand to make prognosis on the mechanical properties and occurrence of damage to pavements. Therefore, in this paper, various types of functionality enhancement of industrialized optical fiber sensors for pavement monitoring are developed, with the corresponding operational principles clarified in theory and the performance double checked by basic experiments. Furthermore, a self-healing optical fiber sensing network system is adopted to accomplish full-scale monitoring of pavements. The application of optical fiber sensors assembly and self-healing network system in pavement has been carried out to validate the feasibility. It has been proved that the research in this article provides a valuable method and meaningful guidance for the integrity monitoring of civil structures, especially pavements.

  2. Mobile and modular. BGR develops seismological monitoring stations for universal applications; Mobil und modular. BGR entwickelt universell einsetzbare seismologische Messstationen

    Energy Technology Data Exchange (ETDEWEB)

    Hinz, Erwin; Hanneken, Mark [Bundesanstalt fuer Geowissenschaften und Rohstoffe, Hannover (Germany). Fachbereich ' ' Seismologisches Zentralobservatorium, Kernwaffenteststopp' '

    2016-05-15

    BGR seismologists often set up monitoring stations for testing purposes. The engineers from the Central Seismological Observatory have now developed a new type of mobile monitoring station which can be remotely controlled.

  3. Development of a remote monitoring system, through monitoring of key safety parameters for a nuclear research reactor

    International Nuclear Information System (INIS)

    Urcia, Agustin; Arrieta, Rolando; Baltuano, Oscar; Chan, Renzo; Tincopa, Jean Pierre; Urquizo, Rafael; Rosas, Bernick

    2014-01-01

    This paper presents the detailed development, installation and commissioning of water level sensors and exposure rate range in the 11 meters level (mouth of tank) of the RP-10 nuclear reactor used to continuously monitor these values and use them as security for the periods of no presence of operating personnel (overlooking situation) with the reactor in shutdown state. The levels of these parameters are packaged and transmitted to a controller in the control room of reactor for display and activation of alarm levels. Additionally, the design of these warning signs is shown in conjunction with the fire alarm in the building of reactor and auxiliary laboratories to be transmitted to the physical security facility, located at a distance of 500 meters. (authors).

  4. Approaching Behaviour Monitor and Vibration Indication in Developing a General Moving Object Alarm System (GMOAS

    Directory of Open Access Journals (Sweden)

    Haiwei Dong

    2013-07-01

    Full Text Available People who suffer from hearing impairment caused by illness, age or extremely noisy environments are constantly in danger of being hit or knocked down by fast moving objects behind them when they have no companion or augmented sensory system to warn them. In this paper, we propose the General Moving Object Alarm System (GMOAS, a system focused on aiding the safe mobility of people under these circumstances. The GMOAS is a wearable haptic device that consists of two main subsystems: (i a moving object monitoring subsystem that uses laser range data to detect and track approaching objects, and (ii an alarm subsystem that warns the user of possibly dangerous approaching objects by triggering tactile vibrations on an “alarm necklace”. For moving object monitoring, we propose a simple yet efficient solution to monitor the approaching behavior of objects. Compared with previous work in motion detection and tracking, we are not interested in specific objects but any type of approaching object that might harm the user. To this extent, we define a boundary in the laser range data where the objects are monitored. Within this boundary a fan-shape grid is constructed to obtain an evenly distributed spatial partitioning of the data. These partitions are efficiently clustered into continuous objects which are then tracked through time using an object association algorithm based on updating a deviation matrix that represents angle, distance and size variations of the objects. The speed of the tracked objects is monitored throughout the algorithm. When the speed of an approaching object surpasses the safety threshold, the alarm necklace is triggered indicating the approaching direction of the fast moving object. The alarm necklace is equipped with three motors that can indicate five directions with respect to the user: left, back, right, left-back and right-back. We performed three types of outdoor experiments (object passing, approaching and crossing that

  5. Data for development in health: a case study and monitoring framework from Kazakhstan

    Science.gov (United States)

    Obermann, Konrad; Chanturidze, Tata; Richardson, Erica; Tanirbergenov, Serik; Shoranov, Marat; Nurgozhaev, Ali

    2016-01-01

    Healthcare reforms are often not coupled with a relevant and appropriate monitoring framework, leaving policymakers and the public without evidence about the implications of such reforms. Kazakhstan has embarked on a large-scale reform of its healthcare system in order to achieve Universal Health Coverage. The health-related 2020 Strategic Development Goals reflect this political ambition. In a case-study approach and on the basis of published and unpublished evidence as well as personal involvement and experience (A) the indicators in the 2020 Strategic Development Goals were assessed and (B) a ‘data-mapping’ exercise was conducted, where the WHO health system framework was used to describe the data available at present in Kazakhstan and comment on the different indicators regarding their usefulness for monitoring the current health-related 2020 Strategic Development Goals in Kazakhstan. It was concluded that the country’s current monitoring framework needs further development to track the progress and outcomes of policy implementation. The application of a modified WHO/World Bank/Global Fund health system monitoring framework was suggested to examine the implications of recent health sector reforms. Lessons drawn from the Kazakhstan experience on tailoring the suggested framework, collecting the data, and using the generated intelligence in policy development and decision-making can serve as a useful example for other middle-income countries, potentially enabling them to fast-track developments in the health sector. PMID:28588905

  6. DEVELOPMENT OF SOFTWARE SYSTEM FOR MONITORING OF STRESS CORROSION CRACKING OF THE PIPELINE UNDER TENSION

    Directory of Open Access Journals (Sweden)

    Z. K. Abaev

    2016-01-01

    Full Text Available The software and hardware development tendency, providing the automated monitoring and control of basic and auxiliary technological processes of gas transportation via system of main gas pipelines has been revealed. The article discusses the stages of creation of the software of system of monitoring corrosion cracking under tension (SCC. The new useful adequate regression models development determining the risk level of LCC is shown. A ranking sections algorithm of main gas pipeline (MG on the propensity to SCC is presented. Adequate developed regression equation determining the LCC risk level has been developed. To count the main gas pipeline lifetime the variable rank of the danger of SCC (RSCC on the basis of methods of fuzzy logic is proposed to use. Implementation of the fuzzy model was carried out using the graphical tools developed in MATLAB using the expansion pack Fuzzy Logic Toolbox. The working algorithm of developed program and the screen forms are presented.

  7. Development of on-line monitoring system for flow accelerated corrosion

    International Nuclear Information System (INIS)

    Lee, N.Y.; Lee, S.G.; Hwang, I.S.; Kim, J.T.; Luk, V.K.

    2005-01-01

    Aged nuclear piping has been reported to undergo corrosion-induced accelerated failures, often without giving signatures to current inspection campaigns. Therefore, we need diverse sensors which can cover wide area in the on-line application. We suggested integrated approach to monitor the FAC-susceptible piping. Since FAC is a combined phenomenon, we need to monitor as many parameters as possible, and that cover wide area, since we don't know where the FAC occurs. For this purpose, we introduced wearing rate model, which concentrates on the electrochemical parameters. By the model, we can predict the wearing rate and then can compare the testing result. After we identified feasibility by analytical way, we developed electrochemical sensors for high temperature application, and introduced mechanical monitoring system, which is still under development. To support the validation of the monitored results, we adopted high temperature UT, which shows good resolution in the testing environment. By this way, all the monitored results can be compared in terms of thickness. Validation test shows the feasibility of sensors. To support direct thickness measurement for wide-area, Direct Current Potential Drop method will be researched to integrate to the developed framework. (authors)

  8. On-line monitoring system development for single-phase flow accelerated corrosion

    International Nuclear Information System (INIS)

    Lee, Na Young; Lee, Seung Gi; Ryu, Kyung Ha; Hwang, Il Soon

    2007-01-01

    Aged nuclear piping has been reported to undergo corrosion-induced accelerated failures, often without giving signatures to current inspection campaigns. Therefore, we need diverse sensors which can cover a wide area in an on-line application. We suggest an integrated approach to monitor the flow accelerated corrosion (FAC) susceptible piping. Since FAC is a combined phenomenon, we need to monitor as many parameters as possible and that cover wide area, since we do not know where the FAC occurs. For this purpose, we introduce the wearing rate model which focuses on the electrochemical parameters. Using this model, we can predict the wearing rate and then compare testing results. Through analysis we identified feasibility and then developed electrochemical sensors for high temperature application; we also introduced a mechanical monitoring system which is still under development. To support the validation of the monitored results, we adopted high temperature ultrasonic transducer (UT), which shows good resolution in the testing environment. As such, all the monitored results can be compared in terms of thickness. Our validation tests demonstrated the feasibility of sensors. To support direct thickness measurement for a wide-area, the direct current potential drop (DCPD) method will be researched to integrate into the developed framework

  9. Design and Development of a Low-Cost, Portable Monitoring Device for Indoor Environment Quality

    Directory of Open Access Journals (Sweden)

    Akira Tiele

    2018-01-01

    Full Text Available This article describes the design and development of a low-cost, portable monitoring system for indoor environment quality (IEQ. IEQ is a holistic concept that encompasses elements of indoor air quality (IAQ, indoor lighting quality (ILQ, acoustic comfort, and thermal comfort (temperature and relative humidity. The unit is intended for the monitoring of temperature, humidity, PM2.5, PM10, total VOCs (×3, CO2, CO, illuminance, and sound levels. Experiments were conducted in various environments, including a typical indoor working environment and outdoor pollution, to evaluate the unit’s potential to monitor IEQ parameters. The developed system was successfully able to monitor parameter variations, based on specific events. A custom IEQ index was devised to rate the parameter readings with a simple scoring system to calculate an overall IEQ percentage. The advantages of the proposed system, with respect to commercial units, is associated with better customisation and flexibility to implement a variety of low-cost sensors. Moreover, low-cost sensor modules reduce the overall cost to provide a comprehensive, portable, and real-time monitoring solution. This development facilities researchers and interested enthusiasts to become engaged and proactive in participating in the study, management, and improvement of IEQ.

  10. Vaccine safety monitoring systems in developing countries: an example of the Vietnam model.

    Science.gov (United States)

    Ali, Mohammad; Rath, Barbara; Thiem, Vu Dinh

    2015-01-01

    Only few health intervention programs have been as successful as vaccination programs with respect to preventing morbidity and mortality in developing countries. However, the success of a vaccination program is threatened by rumors and misunderstanding about the risks of vaccines. It is short-sighted to plan the introduction of vaccines into developing countries unless effective vaccine safety monitoring systems are in place. Such systems that track adverse events following immunization (AEFI) is currently lacking in most developing countries. Therefore, any rumor may affect the entire vaccination program. Public health authorities should implement the safety monitoring system of vaccines, and disseminate safety issues in a proactive mode. Effective safety surveillance systems should allow for the conduct of both traditional and alternative epidemiologic studies through the use of prospective data sets. The vaccine safety data link implemented in Vietnam in mid-2002 indicates that it is feasible to establish a vaccine safety monitoring system for the communication of vaccine safety in developing countries. The data link provided the investigators an opportunity to evaluate AEFI related to measles vaccine. Implementing such vaccine safety monitoring system is useful in all developing countries. The system should be able to make objective and clear communication regarding safety issues of vaccines, and the data should be reported to the public on a regular basis for maintaining their confidence in vaccination programs.

  11. Development of network communication function for digitalized neutron flux monitoring instrument

    International Nuclear Information System (INIS)

    Li Kai; Zhang Liangju; Chen Xiaojun; Li Baoxiang

    2002-01-01

    It is essential for a digitalized Neutron Flux Monitoring Instrument to communicate with other parts of Instrumentation and Control System in a network environment, and it is fairly different from the case of traditional analogue nuclear instrumentation. How to satisfy all the requirements of different network structure and communication protocol, which might be adopted in different target nuclear power plant, is a key issue in the design and development of a digitalized neutron flux monitoring instrument. The author describes the overall communication scheme, mainly discusses the design idea and the requirements of the communication interfaces and the implementation of the RS-485 interface as an example of the digitalized neutron flux monitoring instrument, which is under development in the institute

  12. Development of advanced secondary chemistry monitoring system for Korea nuclear power plants

    International Nuclear Information System (INIS)

    Lee, Sang Hak; Kim, Chung Tae

    1997-01-01

    Water chemistry control is one of the most important tasks in order to maintain the reliability of plant equipments and extend the operating life of the plant. KEPCO and KOPEC developed a computerized tool for this purpose -ASCMS (advanced secondary chemistry monitoring system) which is able to monitor and diagnose the secondary water chemistry. A prototype system had been installed at KORI 3 nuclear power plant since April 1993 in order to evaluate the system performance. After the implementation of enhancements identified during the testing of the prototype, we have developed the advanced secondary monitoring system, ASCMS which is installed at 5 nuclear power plants and has been under operations since April 1997. The ASCMS comprises PC subsystem designed for data acquisition, data analysis, and data diagnosis. The ASCMS will provide overall information related to steam generator secondary side water chemistry problems and improve plant availability, reduce radiation exposure to workers, and reduce operating and maintenance costs. 6 figs

  13. Development and Optimisation of the SPS and LHC beam diagnostics based on Synchrotron Radiation monitors

    CERN Document Server

    AUTHOR|(CDS)2081364; Roncarolo, Federico

    Measuring the beam transverse emittance is fundamental in every accelerator, in particular for colliders, where its precise determination is essential to maximize the luminosity and thus the performance of the colliding beams.
 Synchrotron Radiation (SR) is a versatile tool for non-destructive beam diagnostics, since its characteristics are closely related to those of the source beam. At CERN, being the only available diagnostics at high beam intensity and energy, SR monitors are exploited as the proton beam size monitor of the two higher energy machines, the Super Proton Synchrotron (SPS) and the Large Hadron Collider (LHC). The thesis work documented in this report focused on the design, development, characterization and optimization of these beam size monitors. Such studies were based on a comprehensive set of theoretical calculations, numerical simulations and experiments. A powerful simulation tool has been developed combining conventional softwares for SR simulation and optics design, thus allowing t...

  14. Development of the Sodium-cooled Fast Reactor R and D and Technology Monitoring System

    International Nuclear Information System (INIS)

    Lee, Dong Uk; Won, Byung Chool; Kim, Young In; Hahn, Do Hee

    2008-01-01

    This study presents a R and D performance monitoring system that is applicable for managing the generation IV sodium-cooled fast reactor development. The prime goal of this system is to furnish project manager with reliable and accurate information of status of progress, performance and resource allocation, and attain traceability and visibility of project implementation for effective project management. In this study, the work breakdown structure, the related schedule and the expected outputs were established to derive the interfaces between projects and the above parameters was loaded PCs. The R and D performance monitoring system is composed of about 750 R and D activities within 'Development of Basic Key Technologies for Gen IV SFR' project in 2007. The Microsoft Project Professional software was used to monitor the progress, evaluate the results and analyze the resource distribution to activities

  15. Development and application of remote video monitoring system for combine harvester based on embedded Linux

    Science.gov (United States)

    Chen, Jin; Wang, Yifan; Wang, Xuelei; Wang, Yuehong; Hu, Rui

    2017-01-01

    Combine harvester usually works in sparsely populated areas with harsh environment. In order to achieve the remote real-time video monitoring of the working state of combine harvester. A remote video monitoring system based on ARM11 and embedded Linux is developed. The system uses USB camera for capturing working state video data of the main parts of combine harvester, including the granary, threshing drum, cab and cut table. Using JPEG image compression standard to compress video data then transferring monitoring screen to remote monitoring center over the network for long-range monitoring and management. At the beginning of this paper it describes the necessity of the design of the system. Then it introduces realization methods of hardware and software briefly. And then it describes detailedly the configuration and compilation of embedded Linux operating system and the compiling and transplanting of video server program are elaborated. At the end of the paper, we carried out equipment installation and commissioning on combine harvester and then tested the system and showed the test results. In the experiment testing, the remote video monitoring system for combine harvester can achieve 30fps with the resolution of 800x600, and the response delay in the public network is about 40ms.

  16. Web design and development for centralize area radiation monitoring system in Malaysian Nuclear Agency

    Science.gov (United States)

    Ibrahim, Maslina Mohd; Yussup, Nolida; Haris, Mohd Fauzi; Soh @ Shaari, Syirrazie Che; Azman, Azraf; Razalim, Faizal Azrin B. Abdul; Yapp, Raymond; Hasim, Harzawardi; Aslan, Mohd Dzul Aiman

    2017-01-01

    One of the applications for radiation detector is area monitoring which is crucial for safety especially at a place where radiation source is involved. An environmental radiation monitoring system is a professional system that combines flexibility and ease of use for data collection and monitoring. Nowadays, with the growth of technology, devices and equipment can be connected to the network and Internet to enable online data acquisition. This technology enables data from the area monitoring devices to be transmitted to any place and location directly and faster. In Nuclear Malaysia, area radiation monitor devices are located at several selective locations such as laboratories and radiation facility. This system utilizes an Ethernet as a communication media for data acquisition of the area radiation levels from radiation detectors and stores the data at a server for recording and analysis. This paper discusses on the design and development of website that enable all user in Nuclear Malaysia to access and monitor the radiation level for each radiation detectors at real time online. The web design also included a query feature for history data from various locations online. The communication between the server's software and web server is discussed in detail in this paper.

  17. New developments in the surveillance and diagnostics technology for vibration, structure-borne sound and leakage monitoring systems

    International Nuclear Information System (INIS)

    Gloth, Gerrit

    2009-01-01

    Monitoring and diagnostic systems are of main importance for a safe and efficient operation of nuclear power plants. The author describes new developments with respect to vibration monitoring with a functional extension in the time domain for den secondary circuit, the development of a local system for the surveillance of rotating machines, the structure-borne sound monitoring with improvement of event analysis, esp. the loose part locating, leakage monitoring with a complete system for humidity measurement, and the development of a common platform for all monitoring and diagnostic systems, that allows an efficient access for comparison and cross references.

  18. New perspectives for undoped CaF2 scintillator as a threshold activation neutron detector

    OpenAIRE

    Sibczynski Pawel; Dziedzic Andrzej; Grodzicki Krystian; Iwanowska-Hanke Joanna; Moszyński Marek; Swiderski Lukasz; Syntfeld-Każuch Agnieszka; Wolski Dariusz; Carrel Frédérick; Grabowski Amélie; Hamel Matthieu; Laine Frederic; Sari Adrien; Iovene Alessandro; Tintori Carlo

    2018-01-01

    In this paper we present the prompt photofission neutron detection performance of undoped CaF2 scintillator using Threshold Activation Detection (TAD). The study is carried out in the frame of C-BORD Horizon 2020 project, during which an efficient toolbox for high volume freight non-intrusive inspection (NII) is under development. Technologies for radiation monitoring are the part of the project. Particularly, detection of various radiological threats on country borders plays an important sig...

  19. Development of the Beidou Ionospheric Observation Network in China for space weather monitoring

    Science.gov (United States)

    Hu, Lianhuan; Yue, Xinan; Ning, Baiqi

    2017-08-01

    The Global Navigation Satellite System (GNSS) beacon has been widely used in ionospheric monitoring. The Chinese Beidou Navigation Satellite System (BDS) started to operate in 2012, with three kinds of constellations: the medium Earth orbit, the inclined geosynchronous satellite orbit, and the geosynchronous Earth orbit. A compact, portable, and low-power GNSS observation instrument which is named BG2 GNSS ionospheric monitor was developed at the Institute of Geology and Geophysics, Chinese Academy of Sciences. It is capable of tracking BDS, Global Positing System, and Global Navigation Satellite System signals with a sampling rate up to 5 Hz. To use the unique BDS GEO signals for ionospheric monitoring, the Beidou Ionospheric Observation Network (BION) utilizing the BG2 GNSS ionospheric monitor was established recently in China with a total of 30 sites. This paper describes the development of the GNSS ionospheric monitor, the construction of the network, data processing, and preliminary scientific research. As demonstrated in the following paper, the BDS GEO total electron content data have shown unique value in some specific ionospheric studies due to the fact that it is not influenced by the mixed effect of spatial and temporal ionospheric variability as observed with other GNSS signals.

  20. Development of Operational Safety Monitoring System and Emergency Preparedness Advisory System for CANDU Reactors (I)

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ma Woong; Shin, Hyeong Ki; Lee, Sang Kyu; Kim, Hyun Koon; Yoo, Kun Joong; Ryu, Yong Ho [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of); Son, Han Seong; Song, Deok Yong [ENESYS, Daejeon (Korea, Republic of)

    2007-10-15

    As increase of operating nuclear power plants, an accident monitoring system is essential to ensure the operational safety of nuclear power plant. Thus, KINS has developed the Computerized Advisory System for a Radiological Emergency (CARE) system to monitor the operating status of nuclear power plant continuously. However, during the accidents or/and incidents some parameters could not be provided from the process computer of nuclear power plant to the CARE system due to limitation of To enhance the CARE system more effective for CANDU reactors, there is a need to provide complement the feature of the CARE in such a way to providing the operating parameters using to using safety analysis tool such as CANDU Integrated Safety Analysis System (CISAS) for CANDU reactors. In this study, to enhance the safety monitoring measurement two computerized systems such as a CANDU Operational Safety Monitoring System (COSMOS) and prototype of CANDU Emergency Preparedness Advisory System (CEPAS) are developed. This study introduces the two integrated safety monitoring system using the R and D products of the national mid- and long-term R and D such as CISAS and ISSAC code.

  1. DEVELOPMENT OF A SENSOR NETWORK TEST BED FOR ISD MATERIALS AND STRUCUTRAL CONDITION MONITORING

    Energy Technology Data Exchange (ETDEWEB)

    Zeigler, K.; Ferguson, B.; Karapatakis, D.; Herbst, C.; Stripling, C.

    2011-07-06

    The P Reactor at the Savannah River Site is one of the first reactor facilities in the US DOE complex that has been placed in its end state through in situ decommissioning (ISD). The ISD end state consists of a grout-filled concrete civil structure within the concrete frame of the original building. To evaluate the feasibility and utility of remote sensors to provide verification of ISD system conditions and performance characteristics, an ISD Sensor Network Test Bed has been designed and deployed at the Savannah River National Laboratory. The test bed addresses the DOE-EM Technology Need to develop a remote monitoring system to determine and verify ISD system performance. Commercial off-the-shelf sensors have been installed on concrete blocks taken from walls of the P Reactor Building. Deployment of this low-cost structural monitoring system provides hands-on experience with sensor networks. The initial sensor system consists of: (1) Groutable thermistors for temperature and moisture monitoring; (2) Strain gauges for crack growth monitoring; (3) Tiltmeters for settlement monitoring; and (4) A communication system for data collection. Preliminary baseline data and lessons learned from system design and installation and initial field testing will be utilized for future ISD sensor network development and deployment.

  2. Development of Operational Safety Monitoring System and Emergency Preparedness Advisory System for CANDU Reactors (I)

    International Nuclear Information System (INIS)

    Kim, Ma Woong; Shin, Hyeong Ki; Lee, Sang Kyu; Kim, Hyun Koon; Yoo, Kun Joong; Ryu, Yong Ho; Son, Han Seong; Song, Deok Yong

    2007-01-01

    As increase of operating nuclear power plants, an accident monitoring system is essential to ensure the operational safety of nuclear power plant. Thus, KINS has developed the Computerized Advisory System for a Radiological Emergency (CARE) system to monitor the operating status of nuclear power plant continuously. However, during the accidents or/and incidents some parameters could not be provided from the process computer of nuclear power plant to the CARE system due to limitation of To enhance the CARE system more effective for CANDU reactors, there is a need to provide complement the feature of the CARE in such a way to providing the operating parameters using to using safety analysis tool such as CANDU Integrated Safety Analysis System (CISAS) for CANDU reactors. In this study, to enhance the safety monitoring measurement two computerized systems such as a CANDU Operational Safety Monitoring System (COSMOS) and prototype of CANDU Emergency Preparedness Advisory System (CEPAS) are developed. This study introduces the two integrated safety monitoring system using the R and D products of the national mid- and long-term R and D such as CISAS and ISSAC code

  3. Development of wall conditioning and impurity monitoring systems in Versatile Experiment Spherical Torus (VEST)

    Energy Technology Data Exchange (ETDEWEB)

    Lee, H.Y., E-mail: brbbebbero@snu.ac.kr [Seoul National University, Seoul (Korea, Republic of); Yang, J.; Kim, Y.G.; Yang, S.M.; Kim, Y.S.; Lee, K.H. [Seoul National University, Seoul (Korea, Republic of); An, Y.H. [National Fusion Research Institute, Daejon (Korea, Republic of); Chung, K.J.; Na, Y.S. [Seoul National University, Seoul (Korea, Republic of); Hwang, Y.S., E-mail: yhwang@snu.ac.kr [Seoul National University, Seoul (Korea, Republic of)

    2016-11-01

    Highlights: • The baking for partial wall heating and H{sub 2}/He GDC systems are developed in VEST. • The RGA and OES systems for monitoring impurities are constructed in VEST. • The partial baking and He GDC show limited effects on plasma characteristics. • H{sub 2} GDC above 4 h enables the longer plasma current duration up to ∼15 ms. • After H{sub 2} GDC, the discharge should be conducted within 3 h from treatment. - Abstract: Wall conditioning and impurity monitoring systems are developed in Versatile Experiment Spherical Torus (VEST). As a wall conditioning system, a baking system covering the vacuum vessel wall partially and a glow discharge cleaning (GDC) system using two electrodes with dc and 50 kHz power supplies are installed. The GDC system operates with hydrogen and helium gases for both chemical and physical desorption. The impurity monitoring system with residual gas analyzer (RGA), operating at <10{sup −5} Torr with a differential pumping system, is installed along with the optical emission spectroscopy (OES) system to monitor the hydrogen and impurity radiation lines. Effects of these wall conditioning techniques are investigated with the impurity monitoring system for ohmic discharges of VEST. The partial baking and He GDC show limited effects on plasma characteristics but sufficient H{sub 2} GDC above 4 h enables the longer plasma current duration up to ∼15 ms within 3 h from the end of treatment.

  4. Development of a wearable wireless body area network for health monitoring of the elderly and disabled

    Science.gov (United States)

    Rushambwa, Munyaradzi C.; Gezimati, Mavis; Jeeva, J. B.

    2017-11-01

    Novel advancements in systems miniaturization, electronics in health care and communication technologies are enabling the integration of both patients and doctors involvement in health care system. A Wearable Wireless Body Area Network (WWBAN) provides continuous, unobtrusive ambulatory, ubiquitous health monitoring, and provide real time patient’s status to the physician without any constraint on their normal daily life activities. In this project we developed a wearable wireless body area network system that continuously monitor the health of the elderly and the disabled and provide them with independent, safe and secure living. The WWBAN system monitors the following parameters; blood oxygen saturation using a pulse oximeter sensor (SpO2), heart rate (HR) pulse sensor, Temperature, hydration, glucose level and fall detection. When the wearable system is put on, the sensor values are processed and analysed. If any of the monitored parameter values falls below or exceeds the normal range, there is trigger of remote alert by which an SMS is send to a doctor or physician via GSM module and network. The developed system offers flexibility and mobility to the user; it is a real time system and has significance in revolutionizing health care system by enabling non-invasive, inexpensive, continuous health monitoring.

  5. Development of Non-contact Respiratory Monitoring System for Newborn Using a FG Vision Sensor

    Science.gov (United States)

    Kurami, Yoshiyuki; Itoh, Yushi; Natori, Michiya; Ohzeki, Kazuo; Aoki, Yoshimitsu

    In recent years, development of neonatal care is strongly hoped, with increase of the low-birth-weight baby birth rate. Especially respiration of low-birth-weight baby is incertitude because central nerve and respiratory function is immature. Therefore, a low-birth-weight baby often causes a disease of respiration. In a NICU (Neonatal Intensive Care Unit), neonatal respiration is monitored using cardio-respiratory monitor and pulse oximeter at all times. These contact-type sensors can measure respiratory rate and SpO2 (Saturation of Peripheral Oxygen). However, because a contact-type sensor might damage the newborn's skin, it is a real burden to monitor neonatal respiration. Therefore, we developed the respiratory monitoring system for newborn using a FG (Fiber Grating) vision sensor. FG vision sensor is an active stereo vision sensor, it is possible for non-contact 3D measurement. A respiratory waveform is calculated by detecting the vertical motion of the thoracic and abdominal region with respiration. We attempted clinical experiment in the NICU, and confirmed the accuracy of the obtained respiratory waveform was high. Non-contact respiratory monitoring of newborn using a FG vision sensor enabled the minimally invasive procedure.

  6. Influence of Optimization of Process Parameters on Threshold Voltage for Development of HfO2/TiSi2 18 nm PMOS

    Directory of Open Access Journals (Sweden)

    Atan N.

    2016-01-01

    Full Text Available Manufacturing a 18-nm transistor requires a variety of parameters, materials, temperatures, and methods. In this research, HfO2 was used as the gate dielectric ad TiO2 was used as the gate material. The transistor HfO2/TiSi2 18-nm PMOS was invented using SILVACO TCAD. Ion implantation was adopted in the fabrication process for the method’s practicality and ability to be used to suppress short channel effects. The study involved ion implantation methods: compensation implantation, halo implantation energy, halo tilt, and source–drain implantation. Taguchi method is the best optimization process for a threshold voltage of HfO2/TiSi2 18-nm PMOS. In this case, the method adopted was Taguchi orthogonal array L9. The process parameters (ion implantations and noise factors were evaluated by examining the Taguchi’s signal-to-noise ratio (SNR and nominal-the-best for the threshold voltage (VTH. After optimization, the result showed that the VTH value of the 18-nm PMOS device was -0.291339.

  7. Developing an Indicator System for Monitoring, Analyzing, and Assessing Airport Sustainability

    NARCIS (Netherlands)

    Janic, M.

    2010-01-01

    This paper deals with developing an indicator system for monitoring, analyzing, and assessing sustainability of airports. The sustainability implies simultaneous increasing of the overall socialeconomic benefits and increasing at a slower rate, stagnating, and/or diminishing of the negative impacts

  8. Development of the Transient Pulse Monitor (TPM) for Scatha/P78-2

    Science.gov (United States)

    Adamo, R. C.; Nanevicz, J. E.; Hilbers, G. R.

    1979-01-01

    An instrumentation system developed for the detection of electrical transients on space vehicles is presented. The pulse monitor measures the electron pulse environment on a spacecraft at synchronous altitude, and characterizes signals produced by arcing between differentially charged elements on the spacecraft.

  9. 75 FR 22126 - Office of Research and Development; Ambient Air Monitoring Reference and Equivalent Methods...

    Science.gov (United States)

    2010-04-27

    ... ENVIRONMENTAL PROTECTION AGENCY [FRL-9142-1] Office of Research and Development; Ambient Air... Assurance Handbook for Air Pollution Measurement Systems, Volume I,'' EPA/600/R-94/038a and ``Quality Assurance Handbook for Air Pollution Measurement Systems, Volume II, Ambient Air Quality Monitoring Program...

  10. Monitoring Scientific Developments from a Dynamic Perspective: Self-Organized Structuring To Map Neural Network Research.

    Science.gov (United States)

    Noyons, E. C. M.; van Raan, A. F. J.

    1998-01-01

    Using bibliometric mapping techniques, authors developed a methodology of self-organized structuring of scientific fields which was applied to neural network research. Explores the evolution of a data generated field structure by monitoring the interrelationships between subfields, the internal structure of subfields, and the dynamic features of…

  11. Development of a Decision Support System for Monitoring, Reporting, Forecasting Ecological Conditions of the Appalachian Trail

    Science.gov (United States)

    Y. Wang; R. Nemani; F. Dieffenbach; K. Stolte; G. Holcomb

    2010-01-01

    This paper introduces a collaborative multi-agency effort to develop an Appalachian Trail (A.T.) MEGA-Transect Decision Support System (DSS) for monitoring, reporting and forecasting ecological conditions of the A.T. and the surrounding lands. The project is to improve decision-making on management of the A.T. by providing a coherent framework for data integration,...

  12. REDD+ readiness: early insights on monitoring, reporting and verification systems of project developers

    NARCIS (Netherlands)

    Joseph, S.; Herold, M.; Sunderlin, W.D.; Verchot, L.V.

    2013-01-01

    A functional measuring, monitoring, reporting and verification (MRV) system is essential to assess the additionality and impact on forest carbon in REDD+ (reducing emissions from deforestation and degradation) projects. This study assesses the MRV capacity and readiness of project developers at 20

  13. 76 FR 15974 - Office of Research and Development; Ambient Air Monitoring Reference and Equivalent Methods...

    Science.gov (United States)

    2011-03-22

    ..., Research Triangle Park, North Carolina 27711. Designation of these new equivalent methods is intended to... ENVIRONMENTAL PROTECTION AGENCY [FRL-9285-2] Office of Research and Development; Ambient Air Monitoring Reference and Equivalent Methods: Designation of Four New Equivalent Methods AGENCY: Environmental...

  14. Tourism Development in the Dutch Wadden Area : Spatial-Temporal Characteristics and Monitoring Needs

    NARCIS (Netherlands)

    Sijtsma, Frans J; Broersma, Lourens; Daams, Michiel N; Hoekstra, H; Werner, Gelijn

    2015-01-01

    The paper presents a spatial and temporal analysis of tourism in the Dutch Wadden area and identifies policy dilemmas and monitoring needs. The analysis is temporal because historical, current and future aspects of tourism development are addressed; it is spatial because the spatial differentiaton

  15. Monitoring the development of a microbial electrolysis cell bioanode using an electrochemical quartz crystal microbalance

    NARCIS (Netherlands)

    Kleijn, J.M.; Lhuillier, Q.; Jeremiasse, A.W.

    2010-01-01

    In this paper we explored the use of an electrochemical quartz crystal microbalance (QCM) to follow the development of electrochemically active biofilms on electrodes. With this technique it should be possible to monitor simultaneously the increase in biomass and the current generated by the

  16. Monitoring and Evaluation of an Early Childhood Development Programme: Implications for Leadership and Management

    Science.gov (United States)

    Hodgson, Sarah; Papatheodorou, Theodora; James, Mary

    2014-01-01

    The article aims to discuss preliminary findings from a participatory monitoring and evaluation (M&E) framework, used in a community-based early childhood development (ECD) programme in KwaZulu-Natal South Africa, and their implications for leadership and management. The purposes of the M&E were for LETCEE, the implementing organization,…

  17. Development of a GIS-based monitoring and management system for underground coal mining safety

    Energy Technology Data Exchange (ETDEWEB)

    Salap, Seda; Karslioglu, Mahmut Onur [Civil Engineering Department, Geomatics Division, Middle East Technical University, Ankara (Turkey); Demirel, Nuray [Mining Engineering Department, Middle East Technical University, Ankara (Turkey)

    2009-11-01

    Coal mine safety is of paramount concern to mining industry. Mine accidents have various causes and consequences including catastrophic failure of mine, substantial economic losses and most notably loss of lives. Therefore, any initiative in mine monitoring is of vital importance for progressing safety surveillance and maintenance. This paper presents the development of a geographic information system (GIS)-based monitoring and management system for underground mine safety in three levels as constructive safety, surveillance and maintenance, and emergency. The developed model integrates the database design and management to the monitoring system implementation which encompasses query and analysis operations with the help of web and desktop applications. Interactive object-oriented graphical user interfaces (GUIs) were developed to visualize information about the entities gathered from the model and also to provide analysis operations based on the graphical representations and demonstrations using data tables and map objects. The research methodology essentially encompasses five main stages: (i) designing a conceptual database model; (ii) development of a logical model in terms of entity-relationship (ER) diagrams; (iii) development of a physical model based on physical constraints and requirements; (iv) development of GUIs and implementation of the developed model, analysis and queries; (v) verification and validation of the created model for Oemerler underground coal mine in Turkey. The proposed system is expected to be an efficient tool for improving and maintaining healthy standards in underground coal mines which can possibly be extended to a national GIS infrastructure. (author)

  18. Development of a multisensory arm for process monitoring in Robot Assisted Polishing

    DEFF Research Database (Denmark)

    Pilny, Lukas; Dalla Costa, Giuseppe; Bissacco, Giuliano

    2015-01-01

    A multisensory polishing arm with integrated three component force sensor, a miniature acoustic emission (AE) sensor and an accelerometer was developed for process monitoring in Robot Assisted Polishing (RAP) process. The arm design was optimized for integration of a force and an AE sensor...... for measurement bias caused by the inertial component due to the mass of the oscillating arm, acceleration is measured, inertia component calculated and subtracted from the measurements. The results demonstrate the suitability of the custom designed multisensory polishing arm for process monitoring in all RAP...

  19. Developing a PQ monitoring system for assessing power quality and critical areas detection

    OpenAIRE

    Miguel Romero; Ricardo Pardo; Luis Gallego

    2011-01-01

    This paper outlines the development of a power quality monitoring system. The system is aimed at assessing power quality and detecting critical areas throughout at distribution system. Such system integrates a hardware system and a software processing tool developed in four main stages. Power quality disturbances are registered by PQ meters and the data is transmitted through a 3G wireless network. This data is processed and filtered in an open source database. Some interesting statistical in...

  20. Crosswell CASSM(Continuous Active-Source Seismic Monitoring): Recent Developments (Invited)

    Science.gov (United States)

    Daley, T. M.; Niu, F.; Ajo Franklin, J. B.; Solbau, R.; Silver, P. G.

    2009-12-01

    Continuous active-source monitoring using borehole sources and sensors in a crosswell configuration has proven to be a useful tool for monitoring subsurface processes (Silver, et al, 2007; Daley, et al, 2007; Niu, et al, 2008). This recent work has focused on two applications: monitoring stress changes related to seismicity and monitoring changes in fluid distribution related to geologic storage of CO2. Field tests have demonstrated precision in travel time measurement of up to 1.1 x 10-7 s, and in velocity perturbation measurement of up to 1.1 x 10-5 (Niu, et al 2008). In this talk I will summarize our preceding work and discuss current developments. Current efforts address both hardware and design challenges to improving the methodology. Hardware issues include deployment of multiple piezoelectric sources in shallow and deep boreholes, source and sensor deployment on tubing inside casing, and deployment with other monitoring instrumentation. Design issues are focused on use of multiple sources and/or sensors to obtain optimal spatial resolution for monitoring processes in the interwell region. This design issue can be investigated with optimal experiment design theory. New field experiments for monitoring seismicity (at SAFOD) and CO2 injection (at a US Dept of Energy pilot) are in the design/deployment stage. Current status of these projects will be discussed. References: Silver, P.G., Daley, T.M., Niu, F., Majer, E.L., 2007, Active source monitoring of crosswell seismic travel time for stress induced changes, Bulletin of Seismological Society of America, v97, n1B, p281-293. Daley, T.M., R.D. Solbau, J.B. Ajo-Franklin, S.M. Benson, 2007, Continuous active-source monitoring of CO2 injection in a brine aquifer, Geophysics, v72, n5, pA57-A61, DOI:10.1190/1.2754716. Niu, F., Silver, P.G., Daley, T.M., Cheng, X., Majer, E.L., 2008, Preseismic velocity changes observed from active source monitoring at the Parkfield SAFOD drill site, Nature, 454, 204-208, DOI:10

  1. Development of a compact low power pulse processing electronics for radiation monitoring applications

    International Nuclear Information System (INIS)

    Madhavi, V.; Manna, A.; Jakati, R.K.

    2010-01-01

    There exists certain health and area monitoring requirements in the nuclear facilities, such as, low level detection of radionuclides (emitting alpha and beta), where a spectroscopic measurement (512 to 1K channels) of the activity is desirable to have accurate compensation of background interference. A low power, single supply operated pulse processing electronics has been developed for such applications. We report here the design issues and performance observed on a prototype unit that includes a charge sensitive preamp (CSA), PZ cancellation network, gain and shaping stages, diode restorer, discriminator and output driver stages in a compact multi layer PCB (10 cm x 7 cm). The front-end electronics is used in fast neutron monitor (based on PIN diode) and is also suitable for other gross counting applications like neutron detection with BF 3 , He 3 and beta dosimetry with PIN diodes . It also includes a low power differential driver (up to 100m) for discriminator output in remote monitoring applications. (author)

  2. Development of a portable system to test area monitors for neutrons

    International Nuclear Information System (INIS)

    Souza, Luciane de Rezende

    2011-02-01

    The objective is to develop a portable system to test the reliability in terms of calibration of area monitors for neutrons. For the production of this system, thickness and location of the source within the system were simulated using the code of radiation transport MCNP5. The thicknesses were set for a 241 Am-Be source with an activity of 395 mCi, which will be in a polyethylene cylinder which will provide a ambient dose equivalent rate chosen through the points of calibration settings' used by the Laboratory of Neutrons (IRD / CNEN). The results obtained in this study show the feasibility of mounting the portable system as a tool to test the area monitors for neutrons, which will provide the user of neutron area monitors to check the instrument's response in the same field of operation, thus avoiding the use of an inadequate equipment. (author)

  3. Development and Application of integrated monitoring platform for the Doppler Weather SA-BAND Radar

    Science.gov (United States)

    Zhang, Q.; Sun, J.; Zhao, C. C.; Chen, H. Y.

    2017-10-01

    The doppler weather SA-band radar is an important part of modern meteorological observation methods, monitoring the running status of radar and the data transmission is important.This paper introduced the composition of radar system and classification of radar data,analysed the characteristics and laws of the radar when is normal or abnormal. Using Macromedia Dreamweaver and PHP, developed the integrated monitoring platform for the doppler weather SA-band radar which could monitor the real-time radar system running status and important performance indicators such as radar power,status parameters and others on Web page,and when the status is abnormal it will trigger the audio alarm.

  4. Development of noSQL data storage for the ATLAS PanDA Monitoring System

    CERN Document Server

    Ito, H; The ATLAS collaboration; Wenaus, T

    2012-01-01

    For several years the PanDA Workload Management System has been the basis for distributed production and analysis for the ATLAS experiment at the LHC. Since the start of data taking PanDA usage has ramped up steadily, typically exceeding 500k completed jobs/day by June 2011. The associated monitoring data volume has been rising as well, to levels that present a new set of challenges in the areas of database scalability and monitoring system performance and efficiency. These challenges have being met with a R&D and development effort aimed at implementing a scalable and efficient monitoring data storage based on a noSQL solution (Cassandra). We present the data design and indexing strategies for efficient queries, as well as our experience of operating a Cassandra cluster and interfacing it with a Web service.

  5. Extreme Threshold Failures Within a Heterogeneous Elastic Thin Sheet and the Spatial-Temporal Development of Induced Seismicity Within the Groningen Gas Field

    Science.gov (United States)

    Bourne, S. J.; Oates, S. J.

    2017-12-01

    Measurements of the strains and earthquakes induced by fluid extraction from a subsurface reservoir reveal a transient, exponential-like increase in seismicity relative to the volume of fluids extracted. If the frictional strength of these reactivating faults is heterogeneously and randomly distributed, then progressive failures of the weakest fault patches account in a general manner for this initial exponential-like trend. Allowing for the observable elastic and geometric heterogeneity of the reservoir, the spatiotemporal evolution of induced seismicity over 5 years is predictable without significant bias using a statistical physics model of poroelastic reservoir deformations inducing extreme threshold frictional failures of previously inactive faults. This model is used to forecast the temporal and spatial probability density of earthquakes within the Groningen natural gas reservoir, conditional on future gas production plans. Probabilistic seismic hazard and risk assessments based on these forecasts inform the current gas production policy and building strengthening plans.

  6. SIMAC: development and implementation of a coral reef monitoring network in Colombia.

    Science.gov (United States)

    Garzón-Ferreira, Jaime; Rodríguez-Ramírez, Alberto

    2010-05-01

    Significant coral reef decline has been observed in Colombia during the last three decades. However, due to the lack of monitoring activities, most of the information about health and changes was fragmentary or inadequate. To develop an expanded nation-wide reef-monitoring program, in 1998 INVEMAR (Instituto de Investigaciones Marinas y Costeras: "Colombian Institute of Marine and Coastal Research") designed and implemented SIMAC (Sistema Nacional de Monitorco de Arrecifes Coralinos en Colombia: "National Monitoring System of Coral Reefs in Colombia") with the participation of other institutions. By the end of 2003 the SIMAC network reached more than twice its initial size, covering ten reef areas (seven in the Caribbean and three in the Pacific), 63 reef sites and 263 permanent transects. SIMAC monitoring continued without interruption until 2008 and should persist in the long-term. The SIMAC has a large database and consists basically of water quality measurements (temperature, salinity, turbidity) and a yearly estimation of benthic reef cover, coral disease prevalence, gorgonian density, abundance of important mobile invertebrates, fish diversity and abundance of important fish species. A methods manual is available in the Internet. Data and results of SIMAC have been widely circulated through a summary report published annually since 2000 for the Colombian environmental agencies and the general public, as well as numerous national and international scientific papers and presentations at meetings. SIMAC information has contributed to support regional and global reef monitoring networks and databases (i.e. CARICOMP, GCRMN, ReefBase).

  7. In situ monitoring of cocrystals in formulation development using low-frequency Raman spectroscopy.

    Science.gov (United States)

    Otaki, Takashi; Tanabe, Yuta; Kojima, Takashi; Miura, Masaru; Ikeda, Yukihiro; Koide, Tatsuo; Fukami, Toshiro

    2018-03-07

    In recent years, to guarantee a quality-by-design approach to the development of pharmaceutical products, it is important to identify properties of raw materials and excipients in order to determine critical process parameters and critical quality attributes. Feedback obtained from real-time analyses using various process analytical technology (PAT) tools has been actively investigated. In this study, in situ monitoring using low-frequency (LF) Raman spectroscopy (10-200 cm -1 ), which may have higher discriminative ability among polymorphs than near-infrared spectroscopy and conventional Raman spectroscopy (200-1800 cm -1 ), was investigated as a possible application to PAT. This is because LF-Raman spectroscopy obtains information about intermolecular and/or lattice vibrations in the solid state. The monitoring results obtained from Furosemide/Nicotinamide cocrystal indicate that LF-Raman spectroscopy is applicable to in situ monitoring of suspension and fluidized bed granulation processes, and is an effective technique as a PAT tool to detect the conversion risk of cocrystals. LF-Raman spectroscopy is also used as a PAT tool to monitor reactions, crystallizations, and manufacturing processes of drug substances and products. In addition, a sequence of conversion behaviors of Furosemide/Nicotinamide cocrystals was determined by performing in situ monitoring for the first time. Copyright © 2018 Elsevier B.V. All rights reserved.

  8. Development and characterization of two-component albedo based neutron individual monitoring system using thermoluminescent detectors

    International Nuclear Information System (INIS)

    Martins, Marcelo Marques

    2008-01-01

    A TLD-albedo based two-component neutron individual monitoring system was developed and characterized in this work. The monitor consists of a black plastic holder, an incident neutron boron loaded shield, a moderator polyethylene body (to increase its response), two pairs of TLD-600 and TLD-700 (one pair to each component) and an adjustable belt. This monitoring system was calibrated in thermal neutron fields and in 70 keV, 144 keV, 565 keV, 1.2 MeV and 5 MeV monoenergetic neutron fields. In addition, it was calibrated in 252C f(D 2 O), 252 Cf, 241 Am-B, 241 Am-Be and 238 Pu-Be source fields. For the latter, the lower detection levels are, respectively, 0.009 mSv, 0.06 mSv, 0.12 mSv, 0.09 mSv and 0.08 mSv. The participation in an international intercomparison sponsored by IAEA with simulated workplace fields validated the system. The monitoring system was successfully characterized in the ISO 21909 standard and in an IRD - the Brazilian Institute for Radioprotection and Dosimetry - technical regulation draft. Nowadays, the neutron individual system is in use by IRD for whole body individual monitoring of five institutions, which comprehend several activities. (author)

  9. Actualities and Development of Heavy-Duty CNC Machine Tool Thermal Error Monitoring Technology

    Science.gov (United States)

    Zhou, Zu-De; Gui, Lin; Tan, Yue-Gang; Liu, Ming-Yao; Liu, Yi; Li, Rui-Ya

    2017-09-01

    Thermal error monitoring technology is the key technological support to solve the thermal error problem of heavy-duty CNC (computer numerical control) machine tools. Currently, there are many review literatures introducing the thermal error research of CNC machine tools, but those mainly focus on the thermal issues in small and medium-sized CNC machine tools and seldom introduce thermal error monitoring technologies. This paper gives an overview of the research on the thermal error of CNC machine tools and emphasizes the study of thermal error of the heavy-duty CNC machine tool in three areas. These areas are the causes of thermal error of heavy-duty CNC machine tool and the issues with the temperature monitoring technology and thermal deformation monitoring technology. A new optical measurement technology called the "fiber Bragg grating (FBG) distributed sensing technology" for heavy-duty CNC machine tools is introduced in detail. This technology forms an intelligent sensing and monitoring system for heavy-duty CNC machine tools. This paper fills in the blank of this kind of review articles to guide the development of this industry field and opens up new areas of research on the heavy-duty CNC machine tool thermal error.

  10. Threshold Concepts in Finance: Conceptualizing the Curriculum

    Science.gov (United States)

    Hoadley, Susan; Tickle, Leonie; Wood, Leigh N.; Kyng, Tim

    2015-01-01

    Graduates with well-developed capabilities in finance are invaluable to our society and in increasing demand. Universities face the challenge of designing finance programmes to develop these capabilities and the essential knowledge that underpins them. Our research responds to this challenge by identifying threshold concepts that are central to…

  11. Development of monitor for multiple beta-ray nuclides in liquid radioactive waste (IV)

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Chang Kyu; Nam, Uk Won; Seon, K. I.; Kong, K. N.; Son, J. D.; Chin, H.; Park, J. H.; Yuk, I. S.; Han, W. Y. [Korea Astronomy and Space Science Institute, Daejeon (Korea, Republic of)

    2004-02-15

    In the 4{sup th} fiscal year, the performance of the system developed in previous year have been stablilized. An automatic mixer system to mix the liquid radioactive waste with the liquid scintillator was designed and manufactured to make continuous monitoring possible. Mechanical systems for the automatic transfer, injection of radioactive samples, and for sealing sample bottle and its attachment on detector system have been designed and developed for completely integrated system, The experimental has been performed for the radioactive analysis by using the system. The measured data are transferred to central computer, which controls the monitoring system, through the RS-232 communication protocol. A software for host personal computer was developed for the control and analysis of the integrated system.

  12. Development of monitor for multiple beta-ray nuclides in liquid radioactive waste (IV)

    International Nuclear Information System (INIS)

    Kim, Chang Kyu; Nam, Uk Won; Seon, K. I.; Kong, K. N.; Son, J. D.; Chin, H.; Park, J. H.; Yuk, I. S.; Han, W. Y.

    2004-02-01

    In the 4 th fiscal year, the performance of the system developed in previous year have been stablilized. An automatic mixer system to mix the liquid radioactive waste with the liquid scintillator was designed and manufactured to make continuous monitoring possible. Mechanical systems for the automatic transfer, injection of radioactive samples, and for sealing sample bottle and its attachment on detector system have been designed and developed for completely integrated system, The experimental has been performed for the radioactive analysis by using the system. The measured data are transferred to central computer, which controls the monitoring system, through the RS-232 communication protocol. A software for host personal computer was developed for the control and analysis of the integrated system

  13. Development of a real-time extremity dose monitor for personnel in interventional radiology

    International Nuclear Information System (INIS)

    Ban, Nobuhiko; Kusama, Tomoko; Adachi, Akiko

    2000-01-01

    Protection of personnel in interventional radiology is one of the most important issues of radiological protection in medicine. Fluoroscopically guided interventional procedures require the operation near X-ray beam, which brings a considerable hand exposure to the operators. For the purpose of effectual control of their extremity doses, we have developed a real-time extremity dose monitor which is worn on a strap around the wrist. The monitor consists of a silicon semiconductor detector, thin lithium battery and a waterproof frame with a four-digit LED display. Experiment was carried out to examine a response of the monitor to diagnostic X-rays. A practical test was also performed to evaluate usability in the actual interventional procedures. In the experiment, the extremity dose monitor was placed on an arm phantom and exposed to diagnostic X-rays. Readings of the monitor were compared to those of Capintec PS-033 shallow chamber. The monitor was highly sensitive to diagnostic X-rays. It showed a linear response down to doses of a few tens of microsieverts. For high dose-rate exposure, however, a slight decrease in the response was observed, about 10% of counting loss for 80 kV, 40 mA X-ray at one meter from the focus. With regard to energy dependence, variation was within 20% for 60 to 100 kV X-rays. The monitor showed a good angular response in general, except lateral geometry facing the far side from a detector center. In the practical test, hand exposures of medical staff were measured with the extremity dose monitor. They were also asked to fill in a questionnaire regarding size and weight of the monitor, clarity of the display and usefulness. The subjects consisted of physicians, technicians and nurses who engaged in angiography, PTCD, CT-biopsy, barium enema and so on. The readings of the monitor were less than 1 mSv in most cases while 93 mSv was recorded in an extreme case due to direct-beam exposure. In some cases, TLD rings were used together with the

  14. An adaptive framework for selecting environmental monitoring protocols to support ocean renewable energy development.

    Science.gov (United States)

    Shumchenia, Emily J; Smith, Sarah L; McCann, Jennifer; Carnevale, Michelle; Fugate, Grover; Kenney, Robert D; King, John W; Paton, Peter; Schwartz, Malia; Spaulding, Malcolm; Winiarski, Kristopher J

    2012-01-01

    Offshore renewable energy developments (OREDs) are projected to become common in the United States over the next two decades. There are both a need and an opportunity to guide efforts to identify and track impacts to the marine ecosystem resulting from these installations. A monitoring framework and standardized protocols that can be applied to multiple types of ORED would streamline scientific study, management, and permitting at these sites. We propose an adaptive and reactive framework based on indicators of the likely changes to the marine ecosystem due to ORED. We developed decision trees to identify suites of impacts at two scales (demonstration and commercial) depending on energy (wind, tidal, and wave), structure (e.g., turbine), and foundation type (e.g., monopile). Impacts were categorized by ecosystem component (benthic habitat and resources, fish and fisheries, avian species, marine mammals, and sea turtles) and monitoring objectives were developed for each. We present a case study at a commercial-scale wind farm and develop a monitoring plan for this development that addresses both local and national environmental concerns. In addition, framework has provided a starting point for identifying global research needs and objectives for understanding of the potential effects of ORED on the marine environment.

  15. Challenges of diatom-based biological monitoring and assessment of streams in developing countries.

    Science.gov (United States)

    Bere, Taurai

    2016-03-01

    Stream biomonitoring tools are largely lacking for many developing countries, resulting in adoption of tools developed from other countries/regions. In many instances, however, the applicability of adopted tools to the new system has not been explicitly evaluated. The objective of this study was to test the applicability of foreign diatom-based water quality assessment indices to streams in Zimbabwe, with the view to highlight challenges being faced in diatom-based biological monitoring in this developing country. The study evaluated the relationship between measured water quality variables and diatom index scores and observed some degree of concordance between water quality variables and diatom index scores emphasising the importance of diatom indices in characterisation and monitoring of stream ecological conditions in developing countries. However, ecological requirements of some diatom species need to be clarified and incorporated in a diatom-based water quality assessment protocol unique to these regions. Resources should be channelled towards tackling challenges associated with diatom-based biological monitoring, principally taxonomic studies, training of skilled labour and acquiring and maintaining the necessary infrastructure. Meanwhile, simpler coarse taxonomy-based rapid bioassessment protocol, which is less time and resource consuming and requires less specialised manpower, can be developed for the country.

  16. Modern Project: monitoring developments for safe repository operation and staged closure

    International Nuclear Information System (INIS)

    Mayer, S.; Ouchhi, S.; Verstricht, J.; Maurer, H.; Breen, B.

    2010-01-01

    Document available in extended abstract form only. In a first part, the overall objectives of the MoDeRn project (Monitoring Developments for safe Repository operation and stage closure project) are presented. MoDeRn is a four year (2009-2013) collaborative project co-funded under the 7. Framework Program for Nuclear Research and Training (EURATOM). It involves 17 organizations responsible for research into radioactive waste management in the European Union, United States, Japan and Switzerland, with partners with extensive experience in monitoring activities in underground research laboratories (URL); as well as research institutes and universities with substantial experience in research on socio-technical interactions and public and stakeholder engagement. An overview of the project work packages and of their interdependencies is given. The successful implementation of a repository program for radioactive waste relies on both the technical aspects of a sound safety strategy and scientific and engineering excellence as well as on social aspects such as stakeholder acceptance and confidence. Monitoring is considered key in serving both technical and social objectives. It is not only essential to underpin the technical safety strategy and quality of the engineering, but it can also be an important tool for public communication, contributing to public understanding of and confidence in the repository behaviour. By inclusion of specific national contexts of waste management programs in different countries, the MoDeRn project aims at providing a reference framework for development and implementation of monitoring activities. This will be achieved by stakeholder engagement during all identifiable phases of the radioactive waste disposal process. Thus, site characterisation, construction, operation and staged closure, as well as post-closure institutional control phases have to be addressed. MoDeRn considers different host rock types, such as salt, tuff, crystalline rock

  17. Monitoring of ovarian activity by measurement of urinary excretion rates using the Ovarian Monitor, Part IV: the relationship of the pregnanediol glucuronide threshold to basal body temperature and cervical mucus as markers for the beginning of the post-ovulatory infertile period.

    Science.gov (United States)

    Blackwell, Leonard F; Vigil, Pilar; Alliende, María Elena; Brown, Simon; Festin, Mario; Cooke, Delwyn G

    2016-02-01

    (NFP) indicators. The study consisted only of fertile cycles from women with regular cycles of 20-40 days duration. All the women were intending to avoid a pregnancy during the study, thus the limits of the fertile window were not tested. The NFP signals occurring earlier than the PdG threshold day could lead to an unexpected pregnancy. The signals occurring on the same day or later than the PdG threshold would not lead to unexpected pregnancies, but would require extra abstinence that could lead to non-compliance with the NFP method. A possible improvement in reliability of NFP methods is suggested. This study (project #90905) was funded by the NDP/UNFPA/UNICEF/WHO/World Bank Special Programme of Research, Development and Research Training in Human Reproduction (HRP). D.G.C. currently works for a diagnostic development company, Science Haven Ltd. The other authors have nothing to declare. © The Author 2015. Published by Oxford University Press on behalf of the European Society of Human Reproduction and Embryology. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  18. Development of radiation safety monitoring system at gamma greenhouse gamma facility

    International Nuclear Information System (INIS)

    Hairul Nizam Idris; Azimawati Ahmad, Ahmad Zaki Hussain; Ahmad Fairuz Mohd Nasir

    2009-01-01

    This paper is discussing about installation of radiation safety monitoring system at Gamma Greenhouse Gamma facility, Agrotechnology and Bioscience Division (BAB). This facility actually is an outdoor type irradiation facility, which first in Nuclear Malaysia and the only one in Malaysia. Source Cs-137 (801 Curie) was use as radiation source and it located at the centre of 30 metres diameter size of open irradiation area. The radiation measurement and monitoring system to be equipped in this facility were required the proper equipment and devices, specially purpose for application at outside of building. Research review, literature study and discussion with the equipment manufacturers was being carried out, in effort to identify the best system should be developed. Factors such as tropical climate, environment surrounding and security were considered during selecting the proper system. Since this facility involving with panoramic radiation type, several critical and strategic locations have been fixed with radiation detectors, up to the distance at 200 meter from the radiation source. Apart from that, this developed system also was built for capable to provide the online real-time reading (using internet). In general, it can be summarized that the radiation safety monitoring system for outdoor type irradiation facility was found much different and complex compared to the system for indoor type facility. Keyword: radiation monitoring, radiation safety, Gamma Greenhouse, outdoor irradiation facility, panoramic radiation. (Author)

  19. Development of IoT-based Urban Sinkhole and Road Collapse Monitoring System

    Science.gov (United States)

    Jung, B.; Bang, E.; Lee, H. J.; Jeong, S. W.; Ryu, D.; Kim, S. W.; Kim, B. K.; Yum, B. W.; Lee, I. H.

    2015-12-01

    The consortium of Korean government-funded research institutes is developing IoT- (Internet of things) based underground safety monitoring and alerting system to manage risks arisen from land subsidence and road collapses in metropolitan areas in South Korea. The system consists of four major functional units: subsurface monitoring sensors sending data directly through the internet, centralized servers capable of collecting and processing big data, computational modules providing physical and statistical models for predicting high-risk areas, and geologic information service platforms visualizing underground safety maps for the public. The target urban area will be regionally covered by multi-sensors monitoring soil and groundwater conditions, and by high resolution satellite InSAR images filtering vertical land movements in a centimeter scale. Integrity of buried water supply and sewer lines are also monitored for the possibility of underground cavity formation. Once high-risk area is predicted, more tangible surveying methods such as ground penetrating radar (GPR) and resistivity survey can be applied for locating the cavities. Additionally, laboratory and field experiments are performed to understand overall road collapsing mechanism from the initial cavity creation to its progressive development depending on soil types, degree of compaction, and groundwater condition. Acquired results will update existing fully-coupled hydromechanical models for more accurate prediction of the collapsing-vulnerable area. Preliminary laboratory experiments show that the upward propagation of subsurface cavity is closely related to the soil properties, such as sand-clay ratios and moisture contents, and groundwater dynamics.

  20. Developing a Hydrologic Monitoring Network in Data-Scarce Regions Using Open-Source Arduino Dataloggers

    Directory of Open Access Journals (Sweden)

    Silja V. Hund

    2016-04-01

    Full Text Available Continuous hydrologic monitoring is limited in many regions of the world, creating serious knowledge gaps for water resources managers and scientists. Recent advances in open-source software and hardware technologies, such as the Arduino project, show potential for the development of low-cost (∼$100 automated dataloggers required for continuous data collection. We developed an Arduino-based datalogger (the Ecohydro Logger coupled with water sensors providing digital output to establish a hydrologic monitoring network in the data-scarce wet-dry tropics of Guanacaste, Costa Rica. While we experienced some challenges with a first iteration of our Arduino-based datalogger, an improved version was robust and able to capture long periods of high-frequency stream discharge data. Integration of the monitoring program into the local community was also key to successful deployment, allowing exchange of local knowledge and support. The accessible and low-cost nature of Arduino-based dataloggers can provide a means to extend continuous environmental monitoring into data-scarce regions.

  1. Development of a 3D modeling algorithm for tunnel deformation monitoring based on terrestrial laser scanning

    Directory of Open Access Journals (Sweden)

    Xiongyao Xie

    2017-03-01

    Full Text Available Deformation monitoring is vital for tunnel engineering. Traditional monitoring techniques measure only a few data points, which is insufficient to understand the deformation of the entire tunnel. Terrestrial Laser Scanning (TLS is a newly developed technique that can collect thousands of data points in a few minutes, with promising applications to tunnel deformation monitoring. The raw point cloud collected from TLS cannot display tunnel deformation; therefore, a new 3D modeling algorithm was developed for this purpose. The 3D modeling algorithm includes modules for preprocessing the point cloud, extracting the tunnel axis, performing coordinate transformations, performing noise reduction and generating the 3D model. Measurement results from TLS were compared to the results of total station and numerical simulation, confirming the reliability of TLS for tunnel deformation monitoring. Finally, a case study of the Shanghai West Changjiang Road tunnel is introduced, where TLS was applied to measure shield tunnel deformation over multiple sections. Settlement, segment dislocation and cross section convergence were measured and visualized using the proposed 3D modeling algorithm.

  2. Development of AN Open-Source Automatic Deformation Monitoring System for Geodetical and Geotechnical Measurements

    Science.gov (United States)

    Engel, P.; Schweimler, B.

    2016-04-01

    The deformation monitoring of structures and buildings is an important task field of modern engineering surveying, ensuring the standing and reliability of supervised objects over a long period. Several commercial hardware and software solutions for the realization of such monitoring measurements are available on the market. In addition to them, a research team at the Neubrandenburg University of Applied Sciences (NUAS) is actively developing a software package for monitoring purposes in geodesy and geotechnics, which is distributed under an open source licence and free of charge. The task of managing an open source project is well-known in computer science, but it is fairly new in a geodetic context. This paper contributes to that issue by detailing applications, frameworks, and interfaces for the design and implementation of open hardware and software solutions for sensor control, sensor networks, and data management in automatic deformation monitoring. It will be discussed how the development effort of networked applications can be reduced by using free programming tools, cloud computing technologies, and rapid prototyping methods.

  3. A study on development of monitoring and assessment module for sites

    International Nuclear Information System (INIS)

    Park, Se Moon; Yoon, Bong Yo; Kim, Dae Jung; Park, Joo Wan; Kim, Chang Lak

    2006-01-01

    As the development of total management systems for sites along with site environmental information is becoming standard, the system known as the Site Information and Total Environmental database management System (SITES) has been developed over the last two years. The first result was a database management system for storing data obtained from facilities, and a site characterization in addition to an environmental assessment of a site. The SITES database is designed to be effective and practical for use with facility management and safety assessment in relation to Geographic Information Systems. SITES is a total management program, which includes its database, its data analysis system required for site characterization, a safety assessment modeling system and an environment monitoring system. I can contribute to the institutional management of the facility and to its safety reassessment. SITES is composed of two main modules: the SITES Database Module (SDM) and the Monitoring and Assessment (M and A) module. The M and A module is subdivided into two sub-modules: the Safety Assessment System (SAS) and the Site Environmental Monitoring System (SEMS). SAS controls the data (input and output) from the SITES DB for the site safety assessment, whereas SEMS controls the data obtained from the records of the measuring sensors and facilities. The on-line site and environmental monitoring data is managed in SEMS. The present paper introduces the procedure and function of the M and A modules

  4. Development of a Ground-Based Atmospheric Monitoring Network for the Global Mercury Observation System (GMOS

    Directory of Open Access Journals (Sweden)

    Sprovieri F.

    2013-04-01

    Full Text Available Consistent, high-quality measurements of atmospheric mercury (Hg are necessary in order to better understand Hg emissions, transport, and deposition on a global scale. Although the number of atmospheric Hg monitoring stations has increased in recent years, the available measurement database is limited and there are many regions of the world where measurements have not been extensively performed. Long-term atmospheric Hg monitoring and additional ground-based monitoring sites are needed in order to generate datasets that will offer new insight and information about the global scale trends of atmospheric Hg emissions and deposition. In the framework of the Global Mercury Observation System (GMOS project, a coordinated global observational network for atmospheric Hg is being established. The overall research strategy of GMOS is to develop a state-of-the-art observation system able to provide information on the concentration of Hg species in ambient air and precipitation on the global scale. This network is being developed by integrating previously established ground-based atmospheric Hg monitoring stations with newly established GMOS sites that are located both at high altitude and sea level locations, as well as in climatically diverse regions. Through the collection of consistent, high-quality atmospheric Hg measurement data, we seek to create a comprehensive assessment of atmospheric Hg concentrations and their dependence on meteorology, long-range atmospheric transport and atmospheric emissions.

  5. National forest cover monitoring in mainland South and Southeast Asia: method development and capacity building

    Science.gov (United States)

    Tyukavina, A.; Potapov, P.; Hansen, M.; Talero, Y.; Turubanova, S.; Pickering, J.; Pickens, A. H.; Quyen, N. H.; Spirovska Kono, M.

    2017-12-01

    Timely forest monitoring data produced following good practice guidance are required for national reporting on greenhouse gas emissions, national forest resource assessments, and monitoring for REDD+ projects. Remote sensing provides a cost-efficient supplement to national forest inventories, and is often the single viable source of data on forest extent for countries still in the process of establishing field-based inventories. Operational forest monitoring using remotely sensed data requires technical capacity to store, process, and analyze high volumes of satellite imagery. The University of Maryland Global Land Analysis and Discovery (UMD GLAD) lab possesses such technical capacity and is seeking to transfer it to national agencies responsible for forest reporting, national academic institutions, and NGOs. Our projects in South and Southeast Asia include regional forest monitoring in the lower Mekong region in support of the Regional Land Cover Monitoring System (funded by the NASA SERVIR program) and building capacity for forest monitoring in Nepal, Bangladesh, Vietnam, Cambodia, Laos, and Thailand (funded by the SilvaCarbon program). Our forest monitoring approach is a regional scale adaptation of methods developed for the global analysis (Hansen et al. 2013). The methodology to track large-scale clearing of natural forests (e.g. in Brazil and Indonesia) is well established; however, the methods for small-scale disturbance mapping and tree cover rotation assessment are still in development. In Bangladesh our mapping of tree cover change between 2000-2014 revealed that 54% of the tree canopy cover was outside forests, and the majority of canopy changes were smaller than 0.1 ha. Landsat's 30-m resolution was therefore insufficient to monitor changes in tree cover. By using a probability sample of high resolution (circa 1 m) imagery we were able to quantify change in tree canopy cover outside forests (including village woodlots, tree plantations and agroforestry

  6. Assessment of extreme quantitative precipitation forecasts and development of regional extreme event thresholds using data from HMT-2006 and COOP observers

    Science.gov (United States)

    Ralph, F.M.; Sukovich, E.; Reynolds, D.; Dettinger, M.; Weagle, S.; Clark, W.; Neiman, P.J.

    2010-01-01

    found that the thresholds for the top 1% and top 0.1%of precipitation events were 7.6 cm (24 h)21 [3.0 in. (24 h)-1] and 14.2 cm (24 h)-1 [5.6 in. (24 h)-1] or greater for the CNRFC and only 5.1 cm (24 h)-1 [2.0 in. (24 h)-1] and 9.4 cm (24 h)-1 [3.7 in. (24 h)-1] for the NWRFC, respectively. Similar analyses for all NWS RFCs showed that the threshold for the top 1% of events varies from;3.8 cm (24 h)-1 [1.5 in. (24 h)-1] in the Colorado Basin River Forecast Center (CBRFC) to~5.1 cm (24 h)-1 [3.0 in. (24 h)-1] in the northern tier of RFCs and;7.6 cm (24 h)-1 [3.0 in. (24 h)-1] in both the southern tier and the CNRFC. It is recommended that NWS QPF performance in the future be assessed for extreme events using these thresholds. ?? 2010 American Meteorological Society.

  7. Prototype development of an electrical impedance based simultaneous respiratory and cardiac monitoring system for gated radiotherapy.

    Science.gov (United States)

    Kohli, Kirpal; Liu, Jeff; Schellenberg, Devin; Karvat, Anand; Parameswaran, Ash; Grewal, Parvind; Thomas, Steven

    2014-10-14

    In radiotherapy, temporary translocations of the internal organs and tumor induced by respiratory and cardiac activities can undesirably lead to significantly lower radiation dose on the targeted tumor but more harmful radiation on surrounding healthy tissues. Respiratory and cardiac gated radiotherapy offers a potential solution for the treatment of tumors located in the upper thorax. The present study focuses on the design and development of simultaneous acquisition of respiratory and cardiac signal using electrical impedance technology for use in dual gated radiotherapy. An electronic circuitry was developed for monitoring the bio-impedance change due to respiratory and cardiac motions and extracting the cardiogenic ECG signal. The system was analyzed in terms of reliability of signal acquisition, time delay, and functionality in a high energy radiation environment. The resulting signal of the system developed was also compared with the output of the commercially available Real-time Position Management™ (RPM) system in both time and frequency domains. The results demonstrate that the bioimpedance-based method can potentially provide reliable tracking of respiratory and cardiac motion in humans, alternative to currently available methods. When compared with the RPM system, the impedance-based system developed in the present study shows similar output pattern but different sensitivities in monitoring different respiratory rates. The tracking of cardiac motion was more susceptible to interference from other sources than respiratory motion but also provided synchronous output compared with the ECG signal extracted. The proposed hardware-based implementation was observed to have a worst-case time delay of approximately 33 ms for respiratory monitoring and 45 ms for cardiac monitoring. No significant effect on the functionality of the system was observed when it was tested in a radiation environment with the electrode lead wires directly exposed to high-energy X

  8. Hyperspectral imager survey and developments for scientific and operational land processes monitoring applications

    Science.gov (United States)

    Kunkel, Bernd P.; Posselt, Winfried; Schmidt, Elke; Del Bello, Umberto; Harnisch, Bernd; Meynart, Roland

    1997-05-01

    The recent developments of airborne imaging spectrometers, currently mostly designated hyperspectral imagers, in the spectral regime from 400-2400 nm revealed and proved an enormous application potential for remote sensing of vegetation in particular. Current spaceborne instrument developments and soon mission will expand these applications to regional and global scale surveys and monitoring. Hyperspectral imagers covering the a.m. spectral range promise to represent the ideal future remote sensing tool for vegetation type and status monitoring. The paper starts with a compilation of relevant applications - with emphasis on vegetation and soils - and their particular spectral and radiometric requirements which has been established by the main author recently as part of a Dornier Satellitensysteme (DSS) in-house activity, including a survey of existing and planned instruments of this type. To the possible extent, airborne measurement data from existing instruments will be included to underline the application potential. The second part will provide an insight into current development activities at DSS, mainly as results of ESA contracts, covering instruments such as ROSIS, HRIS demo model and current PRISM studies. The two latter instruments are ideally suited for vegetation monitoring in terms of pixel size, spectral resolution and range from 450-2350 nm, and radiometric performance. An outlook will conclude the paper for future developments and planning for operational hyperspectral missions.

  9. Development of new plant monitoring and control system with advanced man-machine interfaces NUCAMM-80

    International Nuclear Information System (INIS)

    Sato, Hideyuki; Joge, Toshio; Miyake, Masao; Kishi, Shoichi

    1981-01-01

    BWR type nuclear power stations are the typical plants adopting central monitoring system in view of the size of the scale of system and the prevention of radiation exposure. Central control boards became large as much informations and many operating tools are concentrated on them. Recently, the unit capacity has increased, and the safety has been strengthened, therefore more improvement of the man-machine interface is required concerning the monitoring of plant operation. Hitachi Ltd. developed the central monitoring and control system for nuclear power stations ''NUCAMM-80'', concentrating related fundamental techniques such as the collection of plant informations, the expansion of automatic operation, the ergonomic re-evaluation of the arrangement of panels and subsystems, and the effective use of functional hardwares such as controlling computers and cathode ray tubes, for the purposes of improving the reliability of plant operation and the rate of operation, the reduction of the burden of operators and drastic labor saving. The fundamental policy of the development, the construction of the system, panel layout and the collection of informations, the development of the system for plant automation, the development of plant diagnosis and prevention systems, computer system and the merits of this system are described. (Kako, I.)

  10. Development of a microcontroller based vehicle monitor using plastic scintillator detector

    International Nuclear Information System (INIS)

    Thakur, Vaishali M.; Harikumar, M.; Chaudhury, Probal; Jain, Amit; Verma, Amit K.; Babu, D.A.R.; Sharma, D.N.

    2010-01-01

    Full text: The regular operation of nuclear facilities generates significant amounts of radioactive and non radioactive wastes. Often there is a possibility of these getting mixed up and inadvertently being sent for recycling leading to radioactive contamination in the public domain. It is mandatory that all scrap and garbage generated in and around nuclear facilities are monitored before being sent out for recycling or dumping. This becomes more important particularly during the decommissioning of reactors when optimization of the amount nuclear waste generated is very important. A very effective method for monitoring is by using large volume plastic scintillator detectors. The Vehicle Monitoring System (VMS) that was developed for this purpose uses four plastic scintillator detectors of 0.05 m diameter and 0.5 m length. The system designed and was calibrated to independently measure the radiation field of each detector. The hardware for the system was developed using Philips 80C552 microcontroller based Single Board Computer (SBC). The microcontroller software was developed using Keil environment on a Windows Platform. The counts recorded for 5 seconds are sent to the PC continuously. As a backup the minutely average data is also stored in the SBC RAM and can be transferred to the PC on request. The SBC RAM can store the 18 hours data. A watchdog timer was also incorporated in the SBC software to keep it operational after a system hang up due to any unforeseen electrical disturbances. The scrap containing vehicles or trucks to be monitored have to be stationed on the road alongside the Vehicle Monitor. The radiation field data is sent to a remote PC for analysis and storage. A comparative study was done with a Gamma Tracer with the average of the data from 4 detectors. There was very good correlation between data from the two systems. The Vehicle Monitor has much more stability and sensitivity as compared with Gamma Tracer. Apart from vehicle monitoring, the

  11. Development of sensor system built into a robot hand toward environmental monitoring

    International Nuclear Information System (INIS)

    Kaneko, Kenji; Ueshiba, Toshio; Yoshimi, Takashi; Kawai, Yoshihiro; Morisawa, Mitsuharu; Kanehiro, Fumio; Yokoi, Kazuhito

    2015-01-01

    The development of sensor system that is built into a hand of a humanoid robot toward environmental monitoring is presented in this paper. The developed system consists of a color C-MOS camera, a laser projector with a lens distributing a laser light, and a LED projector. The sensor system can activate/disable these components according to the purpose. This paper introduces the design process, pre-experimental results for evaluating components, and the specifications of the developed sensor system together with experimental results. (author)

  12. MONITORING OF INTERNATIONAL DONOR ASSISTANCE IN THE CONTEXT OF THE DEVELOPMENT OF AMALGAMATED TERRITORIAL COMMUNITIES

    Directory of Open Access Journals (Sweden)

    Elina Boichenko

    2017-12-01

    Full Text Available The research is conducted within the framework of the joint project of the F. Ebert Foundation (Germany and the Institute of Economic and Legal Studies of the National Academy of Sciences of Ukraine (Ukraine “The Experience of the Association of Territorial Communities in Eastern Ukraine: Economic and Legal Aspects”. The subject of the study is the theoretical, methodological, and practical aspects of monitoring international donor assistance in the context of the development of amalgamated territorial communities (ATC based on the example of Bilokurakyne and Novopskov ATC. Methodology. The system approach (in substantiating the directions of monitoring and established procedures for monitoring each component of the life of amalgamated territorial communities, logical generalization (in determining the state of development of amalgamated territorial communities, method of absolute, relative, and mean values, analysis of the dynamics series and structural shifts (in determining the dominant trends in the formation and development of ATC, method of economic analysis and synthesis (in determining the content of the monitoring, method of comparison (when the violations in the process of ATC, graphical method (the construction algorithm combined operation and development of local communities imaging method (for presenting the results of the total amount of international aid to ATC are used in the work. The purpose of the research is to develop theoretical, methodological, and practical approaches to the monitoring of international donor assistance in the context of the development of amalgamated territorial communities. The article suggests using monitoring as the most effective tool for controlling economic and social phenomena and processes. The authorial scheme for constructing a procedure for the monitoring of functioning and development of amalgamated territorial communities is developed. The monitoring of international donor support of the

  13. Threshold concepts in finance: conceptualizing the curriculum

    Science.gov (United States)

    Hoadley, Susan; Tickle, Leonie; Wood, Leigh N.; Kyng, Tim

    2015-08-01

    Graduates with well-developed capabilities in finance are invaluable to our society and in increasing demand. Universities face the challenge of designing finance programmes to develop these capabilities and the essential knowledge that underpins them. Our research responds to this challenge by identifying threshold concepts that are central to the mastery of finance and by exploring their potential for informing curriculum design and pedagogical practices to improve student outcomes. In this paper, we report the results of an online survey of finance academics at multiple institutions in Australia, Canada, New Zealand, South Africa and the United Kingdom. The outcomes of our research are recommendations for threshold concepts in finance endorsed by quantitative evidence, as well as a model of the finance curriculum incorporating finance, modelling and statistics threshold concepts. In addition, we draw conclusions about the application of threshold concept theory supported by both quantitative and qualitative evidence. Our methodology and findings have general relevance to the application of threshold concept theory as a means to investigate and inform curriculum design and delivery in higher education.

  14. Iris pigmentation and AC thresholds.

    Science.gov (United States)

    Roche, A F; Mukherjee, D; Chumlea, W C; Siervogel, R M

    1983-03-01

    Data from 160 White children were used to analyze possible associations between iris pigmentation and AC pure-tone thresholds. Iris pigmentation was graded from iris color using glass models of eyes, and AC thresholds were obtained under carefully controlled conditions. Analyses of variance using two groupings of iris color grades showed no evidence of an association between iris color grade and AC thresholds. Furthermore, inspection of arrays of the actual glass eye models, in conjunction with the order of mean thresholds at each test frequency, did not indicate the presence of an association between iris color grades and thresholds. It was concluded that while iris pigmentation may be related to some aspects of hearing ability, it does not appear to be related to AC thresholds in children.

  15. Crossing the threshold

    Science.gov (United States)

    Bush, John; Tambasco, Lucas

    2017-11-01

    First, we summarize the circumstances in which chaotic pilot-wave dynamics gives rise to quantum-like statistical behavior. For ``closed'' systems, in which the droplet is confined to a finite domain either by boundaries or applied forces, quantum-like features arise when the persistence time of the waves exceeds the time required for the droplet to cross its domain. Second, motivated by the similarities between this hydrodynamic system and stochastic electrodynamics, we examine the behavior of a bouncing droplet above the Faraday threshold, where a stochastic element is introduced into the drop dynamics by virtue of its interaction with a background Faraday wave field. With a view to extending the dynamical range of pilot-wave systems to capture more quantum-like features, we consider a generalized theoretical framework for stochastic pilot-wave dynamics in which the relative magnitudes of the drop-generated pilot-wave field and a stochastic background field may be varied continuously. We gratefully acknowledge the financial support of the NSF through their CMMI and DMS divisions.

  16. A critical friend: monitoring and evaluation systems, development cooperation and local government. The case of Tuscany.

    Science.gov (United States)

    Rossignoli, Serena; Coticchia, Fabrizio; Mezzasalma, Annarosa

    2015-06-01

    The role of monitoring and evaluation (M&E) systems in the field of development cooperation has globally increased in last decades. International and regional organizations, as well as states, local governments and NGOs have largely adopted the tools provided by M&E in order to enhance transparency, effectiveness and efficiency. The paper aims at verifying how and to what extent the implementation of M&E systems has affected the overall quality of international cooperation projects financed by a local government. After a literature review on M&E in development cooperation, the research analyzes the wide range of activities (evaluation ex-ante, mid-term, final, monitoring, consultancy) carried out by the Evaluation Team of the XY in the last eight years in behalf of an Italian local government: the Region of Tuscany. The paper reveals the strategic significance of adopting M&E systems in the medium-long term. Copyright © 2015 Elsevier Ltd. All rights reserved.

  17. Environmental monitoring system based on airborne gamma ray spectrometry developed at Geoinstitut Beograd

    International Nuclear Information System (INIS)

    Milojevic, M.; Strumberger, V.

    1997-01-01

    The continuous hazard of nuclear reactor failures, which may exceed in consequences that of the Chernobyl accident on 26 April 1986, makes it imperative for us to develop and introduce soil, water and air contamination control systems to protect the environment. A most efficient means of the contamination control at the artificial radioactive radiation sources is the complex MONITORING SYSTEM controlled from a centre by competent and recognised experts. Such systems have been used for years now many western world countries (USA, Canada, Sweden, etc.). The modest purpose of this paper is at least to leave a trace of the efforts, both individual and of the institute, made in developing a component of the monitoring system - airborne gamma-ray contamination control, which in western systems is a principal technique of remote detection. (author)

  18. DEVELOPMENT OF A GEOGRAPHIC VISUALIZATION AND COMMUNICATIONS SYSTEMS (GVCS) FOR MONITORING REMOTE VEHICLES

    Energy Technology Data Exchange (ETDEWEB)

    COLEMAN, P.; DUNCAN, M.; DURFEE, R.C.; GOELTZ, R; HARRISON, G.; HODGSON, M.E.; KOOK, M.; MCCLAIN, S.

    1998-03-30

    The purpose of this project is to integrate a variety of geographic information systems capabilities and telecommunication technologies for potential use in geographic network and visualization applications. The specific technical goals of the project were to design, develop, and simulate the components of an audio/visual geographic communications system to aid future real-time monitoring, mapping and managing of transport vehicles. The system components of this feasibility study are collectively referred to as a Geographic Visualization and Communications System (GVCS). State-of-the-art techniques will be used and developed to allow both the vehicle operator and network manager to monitor the location and surrounding environment of a transport vehicle during shipment.

  19. Development and clinical evaluation of noninvasive near-infrared monitoring of cerebral oxygenation

    Science.gov (United States)

    Wickramasinghe, Yappa A.; Rolfe, Peter J.; Palmer, Keith; Watkins, S.; Spencer, S. A.; Doyle, M.; O'Brien, S.; Walker, A.; Rice, C.; Smallpeice, C.

    1994-02-01

    Near infrared spectroscopy (NIRS) is a relatively new method which is suitable for monitoring oxygenation in blood and tissue in the brain of the fetus and the neonate. The technique involves in-vivo determination of the absorption of light in the wavelength range 775 to 900 nm through such tissue and converting such changes in absorbance to provide information about the changes in the concentration of oxygenated and de-oxygenated haemoglobin (HbO2 and Hb). Recent developments of the methodology now enable the calculation of changes in cerebral blood volume (CBV) as well as absolute CBV and cerebral blood flow (CBF). The attraction of this method is its applicability to monitor cerebral function in a wide variety of patient groups. Although primarily developed for neonatal use it is today applied on the fetus to investigate fetal hypoxia and on adults undergoing surgery.

  20. Water Quality Monitoring in Developing Countries; Can Microbial Fuel Cells be the Answer?

    Directory of Open Access Journals (Sweden)

    Jon Chouler

    2015-07-01

    Full Text Available The provision of safe water and adequate sanitation in developing countries is a must. A range of chemical and biological methods are currently used to ensure the safety of water for consumption. These methods however suffer from high costs, complexity of use and inability to function onsite and in real time. The microbial fuel cell (MFC technology has great potential for the rapid and simple testing of the quality of water sources. MFCs have the advantages of high simplicity and possibility for onsite and real time monitoring. Depending on the choice of manufacturing materials, this technology can also be highly cost effective. This review covers the state-of-the-art research on MFC sensors for water quality monitoring, and explores enabling factors for their use in developing countries.

  1. Development and validation of a microfluidic reactor for biofilm monitoring via optical methods

    International Nuclear Information System (INIS)

    Meyer, Mariana T; Roy, Varnika; Bentley, William E; Ghodssi, Reza

    2011-01-01

    We present the design, fabrication, and verification of a microfluidic platform for optical monitoring of bacterial biofilms. Biofilm formation characterizes the majority of infections caused by bacteria that are developing increased resistance to traditional antibiotic treatment, necessitating the development of reliable tools not only for study of biofilm growth, but also for in situ examination of the response to applied stimuli. The presented platform was used to continuously and non-invasively observe the dependence of Escherichia coli biofilm formation on bacterial signaling by monitoring the change in biofilm optical density over the growth period. Results were corroborated by measurement of biofilm morphological properties via confocal microscopy, and statistical analysis was applied to verify the repeatability of observed optical and morphological differences in the biofilms formed. The presented platform will be used to characterize biofilm formation and response in drug discovery applications

  2. Glacier Monitoring and Capacity Building: Important Ingredients for Sustainable Mountain Development

    Directory of Open Access Journals (Sweden)

    Samuel U. Nussbaumer

    2017-02-01

    Full Text Available Glacier observation data from major mountain regions of the world are key to improving our understanding of glacier changes: they deliver fundamental baseline information for climatological, hydrological, and hazard assessments. In many mountain ecosystems, as well as in the adjacent lowlands, glaciers play a crucial role in freshwater provision and regulation. This article first presents the state of the art on glacier monitoring and related strategies within the framework of the Global Terrestrial Network for Glaciers (GTN-G. Both in situ measurements of changes in glacier mass, volume, and length as well as remotely sensed data on glacier extents and changes over entire mountain ranges provide clear indications of climate change. Based on experiences from capacity-building activities undertaken in the Tropical Andes and Central Asia over the past years, we also review the state of the art on institutional capacity in these regions and make further recommendations for sustainable mountain development. The examples from Peru, Ecuador, Colombia, and Kyrgyzstan demonstrate that a sound understanding of measurement techniques and of the purpose of measurements is necessary for successful glacier monitoring. In addition, establishing durable institutions, capacity-building programs, and related funding is necessary to ensure that glacier monitoring is sustainable and maintained in the long term. Therefore, strengthening regional cooperation, collaborating with local scientists and institutions, and enhancing knowledge sharing and dialogue are envisaged within the GTN-G. Finally, glacier monitoring enhances the resilience of the populations that depend on water resources from glacierized mountains or that are affected by hazards related to glacier changes. We therefore suggest that glacier monitoring be included in the development of sustainable adaptation strategies in regions with glaciated mountains.

  3. Development of methods for monitoring and controlling power in nuclear reactors

    International Nuclear Information System (INIS)

    Mesquita, Amir Zacarias; Rezende, Hugo Cesar; Santos, Andre Augusto Campagnole dos; Silva, Vitor Vasconcelos Araujo

    2012-01-01

    Redundancy and diversity are two important criteria for power measurement in nuclear reactors. Other criteria such as accuracy, reliability and response speed are also of major concern. Power monitoring of nuclear reactors is normally done by means of neutronic instruments, i.e. by the measurement of neutron flux. The greater the number of channels for power measuring the greater is the reliability and safety of reactor operations. The aim of this research is to develop new methodologies for on-line monitoring of nuclear reactor power using other reliable processes. One method uses the temperature difference between an instrumented fuel element and the pool water below the reactor core. Another method consists of the steady-state energy balance of the primary and secondary reactor cooling loops. A further method is the calorimetric procedure whereby a constant reactor power is monitored as a function of the temperature-rise rate and the system heat capacity. Another methodology, which does not employ thermal methods, is based on measurement of Cherenkov radiation produced within and around the core. The first three procedures, fuel temperature, energy balance and calorimetric, were implemented in the IPR-R1 TRIGA nuclear research reactor at Belo Horizonte (Brazil) and are the focus of the work described here. Knowledge of the reactor thermal power is very important for precise neutron flux and fuel element burnup calculations. The burnup is linearly dependent on the reactor thermal power and its accuracy is important in the determination of the mass of burned 235 U, fission products, fuel element activity, decay heat power generation and radiotoxicity. The thermal balance method developed in this project is now the standard methodology used for IPR-R1 TRIGA reactor power calibration and the fuel temperature measuring is the most reliable way of on-line monitoring of the reactor power. This research project primarily aims at increasing the reliability and safety of

  4. Development of Geomagnetic Monitoring System Using a Magnetometer for the Field

    Science.gov (United States)

    Lee, Young-Cheol; Kim, Sung-Wook; Choi, Eun-Kyeong; Kim, In-Soo

    2014-05-01

    Three institutes including KMA (Korea Meteorological Administration), KSWC (Korean Space Weather Center) of NRRA (National Radio Research Agency) and KIGAM (Korea Institute of Geoscience and Mineral Resources) are now operating magnetic observatories. Those observatories observe the total intensity and three components of geomagnetic element. This paper comes up with a magnetic monitoring system now under development that uses a magnetometer for field survey. In monitoring magnetic variations in areas (active faults or volcanic regions), more reliable results can be obtained when an array of several magnetometers are used rather than a single magnetometer. In order to establish and operate a magnetometer array, such factors as expenses, convenience of the establishment and operation of the array should be taken into account. This study has come up with a magnetic monitoring system complete with a magnetometer for the field survey of our own designing. A magnetic monitoring system, which is composed of two parts. The one is a field part and the other a data part. The field part is composed of a magnetometer, an external memory module, a power supply and a set of data transmission equipment. The data part is a data server which can store the data transmitted from the field part, analyze the data and provide service to the web. This study has developed an external memory module for ENVI-MAG (Scintrex Ltd.) using an embedded Cortex-M3 board, which can be programmed, attach other functional devices (SD memory cards, GPS antennas for time synchronization, ethernet cards and so forth). The board thus developed can store magnetic measurements up to 8 Gbytes, synchronize with the GPS time and transmit the magnetic measurements to the data server which is now under development. A monitoring system of our own developing was installed in Jeju island, taking measurements throughout Korea. Other parts including a data transfer module, a server and a power supply using solar

  5. Albania - Thresholds I and II

    Data.gov (United States)

    Millennium Challenge Corporation — From 2006 to 2011, the government of Albania (GOA) received two Millennium Challenge Corporation (MCC) Threshold Programs totaling $29.6 million. Albania received...

  6. Olfactory threshold in Parkinson's disease.

    Science.gov (United States)

    Quinn, N P; Rossor, M N; Marsden, C D

    1987-01-01

    Olfactory threshold to differing concentrations of amyl acetate was determined in 78 subjects with idiopathic Parkinson's disease and 40 age-matched controls. Impaired olfactory threshold (previously reported by others) was confirmed in Parkinsonian subjects compared with controls. There was no significant correlation between olfactory threshold and age, sex, duration of disease, or current therapy with levodopa or anticholinergic drugs. In a sub-group of 14 levodopa-treated patients with severe "on-off" fluctuations, no change in olfactory threshold between the two states was demonstrable. Olfactory impairment in Parkinson's disease may involve mechanisms that are not influenced by pharmacologic manipulation of dopaminergic or cholinergic status. PMID:3819760

  7. Learning foraging thresholds for lizards

    Energy Technology Data Exchange (ETDEWEB)

    Goldberg, L.A. [Univ. of Warwick, Coventry (United Kingdom). Dept. of Computer Science; Hart, W.E. [Sandia National Labs., Albuquerque, NM (United States); Wilson, D.B. [Massachusetts Inst. of Tech., Cambridge, MA (United States)

    1996-01-12

    This work gives a proof of convergence for a randomized learning algorithm that describes how anoles (lizards found in the Carribean) learn a foraging threshold distance. This model assumes that an anole will pursue a prey if and only if it is within this threshold of the anole`s perch. This learning algorithm was proposed by the biologist Roughgarden and his colleagues. They experimentally confirmed that this algorithm quickly converges to the foraging threshold that is predicted by optimal foraging theory our analysis provides an analytic confirmation that the learning algorithm converses to this optimal foraging threshold with high probability.

  8. Indigenous development and networking of online radon monitors in the underground uranium mine

    International Nuclear Information System (INIS)

    Gaware, J.J.; Sahoo, B.K.; Sapra, B.K.; Mayya, Y.S.

    2010-01-01

    Full text: There has been a long standing demand for online monitoring of radon level in various locations of underground uranium mine for taking care of radiological protection to workers. Nowadays, radon ( 222 Rn) monitors, based on semiconductor detector are increasingly employed for radon monitoring in environment. However, such instruments have some limitations such as (i) requirement of additional dryer in the sampling path, (ii) cannot be connected to a online data logging and monitoring network, (iii) not cost effective for large number of installations. Due to need for dryer, unattended continuous operation of such instruments is not possible particularly in underground uranium mine with humidity in the range of 80 to 98 %. So it is required to develop radon monitors which overcome the above limitations so that large number of monitors can be deployed in the uranium mine. Often radon progeny is electrostatically collected on the detector surface to increase the sensitivity. However, the collection efficiency is highly dependent upon the humidity and trace gas concentration in the sample gas due to charge neutralization effect. This effect can be minimized by applying a high electric field throughout the detector's chamber volume. This cannot be achieved using planner silicon PIN diode (area ∼ 4 cm 2 ) due to its inherent size limitations. This is because the electric field, in case of small inner electrode, falls off rapidly towards the outer electrode. Hence, an instrument has been indigenously developed by designing an annular cylindrical chamber with larger inner cathode (area = 140 cm 2 ) by employing flexible ZnS:Ag sheet (scintillation detector). With this design, the high sensitivity of 2.8 cph/Bqm -3 has been accomplished with the nominal deviation within 15% for vast change in humidity of 5% to 95%. In this instrument, although the alpha spectroscopy is not possible, the high sensitivity of the instruments makes it possible to achieve the MDL as

  9. Development and Application of Devices for Remote Monitoring of Gamma-Ray Contamination at RECOM Ltd

    International Nuclear Information System (INIS)

    Ivanov, O.P.; Stepanov, V.E.; Chesnokov, A.V.; Sudarkin, A.N.; Urutskoev, L.I.

    1999-01-01

    Devices for remote monitoring of gamma-ray contamination develop at RECOM Ltd. are described and typical examples of their application are show. The following devices are discussed: spectrum-sensitive collimated devices for mapping of radioactivity on contaminated surfaces- scanning collimated Gamma Locator, device for field Cs-137 contamination mapping-CORAD; devices for gamma-ray imaging computer-controlled High-Energy Radiation Visualizer (HERV) and Coded Mask Imager

  10. Development of an Electromagnetic Energy Harvester for Monitoring Wind Turbine Blades

    OpenAIRE

    Joyce, Bryan Steven

    2011-01-01

    Wind turbine blades experience tremendous stresses while in operation. Failure of a blade can damage other components or other wind turbines. This research focuses on developing an electromagnetic energy harvester for powering structural health monitoring (SHM) equipment inside a turbine blade. The harvester consists of a magnet inside a tube with coils outside the tube. The changing orientation of the blade causes the magnet to slide along the tube, inducing a voltage in the coils which ...

  11. Development of an X Window based operator's interface for a core monitoring system

    International Nuclear Information System (INIS)

    Vegh, J.; Huszar, J.; Laz, J.

    1992-09-01

    The components, functioning and programming concepts of the man-machine interface applied in an upgraded version of the core monitoring system and reactor information system VERONA for WWER-440 type nuclear power reactors, installed at the Paks Nuclear Power Plant, are described. The application of the X Window standard Graphical User Interface facilitated modular interface design and made program development easier and faster. (author) 3 refs.; 13 figs

  12. Development of skin surface radiation detector system to monitor radioactivity in arterial blood along with positron emission tomography

    International Nuclear Information System (INIS)

    Watabe, Hiroshi; Miyake, Masayasu; Narita, Yuichirou; Nakamura, Takashi; Itoh, Masatoshi

    1995-01-01

    A noninvasive blood radioactivity monitor system for Positron Emission Tomography (PET) study has been developed. This system has dual plastic scintillators to detect positrons from the wrist artery. One is for monitoring the blood radioactivity in artery and tissue, and another is for monitoring only in tissue, in order to subtract background radiation from tissue. The authors carried out phantom experiments for evaluating basic characteristics of this monitor system. Clinical experiments using 15 O-labeled water were also done to compare this system with a conventional invasive monitor

  13. Gamin partable radiation meter with alarm threshold

    International Nuclear Information System (INIS)

    Payat, Rene.

    1981-10-01

    The Gamin Radiation meter is a direct reading, portable, battery-powered gamma doserate meter featuring alarm thresholds. Doserate is read on a micro-ammeter with a millirad-per-hour logarithmic scale, covering a range of 0,1 to 1000 millirads/hour. The instrument issues an audible warning signal when dose-rate level exceeds a threshold value, which can be selected. The detector tube is of the Geiger-Muller counter, energy compensated type. Because of its low battery drain, the instrument can be operated continously for 1000 hours. It is powered by four 1.5 volt alcaline batteries of the R6 type. The electronic circuitry is housed in a small lightweight case made of impact resistant plastic. Applications of the Gamin portable radiation monitor are found in health physics, safety departments, medical facilities, teaching, civil defense [fr

  14. Development of an intelligent hydroinformatic system for real-time monitoring and assessment of civil infrastructure

    Science.gov (United States)

    Cahill, Paul; Michalis, Panagiotis; Solman, Hrvoje; Kerin, Igor; Bekic, Damir; Pakrashi, Vikram; McKeogh, Eamon

    2017-04-01

    With the effects of climate change becoming more apparent, extreme weather events are now occurring with greater frequency throughout the world. Such extreme events have resulted in increased high intensity flood events which are having devastating consequences on hydro-structures, especially on bridge infrastructure. The remote and often inaccessible nature of such bridges makes inspections problematic, a major concern if safety assessments are required during and after extreme flood events. A solution to this is the introduction of smart, low cost sensing solutions at locations susceptible to hydro-hazards. Such solutions can provide real-time information on the health of the bridge and its environments, with such information aiding in the mitigation of the risks associated with extreme weather events. This study presents the development of an intelligent system for remote, real-time monitoring of hydro-hazards to bridge infrastructure. The solution consists of two types of remote monitoring stations which have the capacity to monitor environmental conditions and provide real-time information to a centralized, big data database solution, from which an intelligent decision support system will accommodate the results to control and manage bridge, river and catchment assets. The first device developed as part of the system is the Weather Information Logging Device (WILD), which monitors rainfall, temperature and air and soil moisture content. The ability of the WILD to monitor rainfall in real time enables flood early warning alerts and predictive river flow conditions, thereby enabling decision makers the ability to make timely and effective decisions about critical infrastructures in advance of extreme flood events. The WILD is complemented by a second monitoring device, the Bridge Information Recording Device (BIRD), which monitors water levels at a given location in real-time. The monitoring of water levels of a river allows for, among other applications

  15. Geothermal resource areas database for monitoring the progress of development in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Lawrence, J.D.; Lepman, S.R.; Leung, K.; Phillips, S.L.

    1981-01-01

    The Geothermal Resource Areas Database (GRAD) and associated data system provide broad coverage of information on the development of geothermal resources in the United States. The system is designed to serve the information requirements of the National Progress Monitoring System. GRAD covers development from the initial exploratory phase through plant construction and operation. Emphasis is on actual facts or events rather than projections and scenarios. The selection and organization of data are based on a model of geothermal development. Subjects in GRAD include: names and addresses, leases, area descriptions, geothermal wells, power plants, direct use facilities, and environmental and regulatory aspects of development. Data collected in the various subject areas are critically evaluated, and then entered into an on-line interactive computer system. The system is publically available for retrieval and use. The background of the project, conceptual development, software development, and data collection are described here. Appendices describe the structure of the database in detail.

  16. Development of an advanced radioactive airborne particle monitoring system for use in early warning networks.

    Science.gov (United States)

    Baeza, A; Corbacho, J A; Caballero, J M; Ontalba, M A; Vasco, J; Valencia, D

    2017-09-25

    Automatic real-time warning networks are essential for the almost immediate detection of anomalous levels of radioactivity in the environment. In the case of Extremadura region (SW Spain), a radiological network (RARE) has been operational in the vicinity of the Almaraz nuclear power plant and in other areas farther away since 1992. There are ten air monitoring stations equipped with Geiger-Müller counters in order to evaluate the external ambient gamma dose rate. Four of these stations have a commercial system that provides estimates of the total artificial alpha and beta activity concentrations in aerosols, and of the 131 I activity (gaseous fraction). Despite experience having demonstrated the benefits and robustness of these commercial systems, important improvements have been made to one of these air monitoring systems. In this paper, the analytical and maintenance shortcomings of the original commercial air monitoring system are described first; the new custom-designed advanced air monitoring system is then presented. This system is based mainly on the incorporation of gamma spectrometry using two scintillation detectors, one of NaI:Tl and the other of LaBr 3 :Ce, and compact multichannel analysers. Next, a comparison made of the results provided by the two systems operating simultaneously at the same location for three months shows the advantages of the new advanced air monitoring system. As a result, the gamma spectrometry analysis allows passing from global alpha and beta activity determinations due to artificial radionuclides in aerosols, and the inaccurate measurement of the gaseous 131 I activity concentration, to the possibility of identifying a large number of radionuclides and quantifying each of their activity concentrations. Moreover, the new station's dual capacity is designed to work in early warning monitoring mode and surveillance monitoring mode. This is based on custom developed software that includes an intelligent system to issue the

  17. Development and Application of a ZigBee-Based Building Energy Monitoring and Control System

    Directory of Open Access Journals (Sweden)

    Changhai Peng

    2014-01-01

    Full Text Available Increasing in energy consumption, particularly with the ever-increasing growth and development of urban systems, has become a major concern in most countries. In this paper, the authors propose a cost-effective ZigBee-based building energy monitoring and control system (ZBEMCS, which is composed of a gateway, a base station, and sensors. Specifically, a new hardware platform for power sensor nodes is developed to perform both local/remote power parameter measurement and power on/off switching for electric appliances. The experimental results show that the ZBEMCS can easily monitor energy usage with a high level of accuracy. Two typical applications of ZBEMCS such as subentry metering and household metering of building energy are presented. The former includes lighting socket electricity, HVAC electricity, power electricity and special electricity. The latter includes household metering according to the campus’s main function zone and each college or department. Therefore, this system can be used for energy consumption monitoring, long-term energy conservation planning, and the development of automated energy conservation for building applications.

  18. Volunteered Geographic Information (vgi) and Environmental Monitoring, a New Approach in Developing Countries

    Science.gov (United States)

    Manouchehri, M.; Kiavarz Moghaddam, M.

    2017-09-01

    Increasing world population and unprecedented expansion of urbanization in the world has caused many environmental problems. The relationship between man and the environment is bidirectional one that have great short-term and long-term impacts on the cities and regions. The best way to deal with it is the participation of the people themselves. The use of new technologies has now become one of the most important methods for monitoring the environment that can increase the participation of citizens, improving environmental problems to provide the cheapest and the most accessible form. Developing countries such as Iran, which faces enormous environmental problems are suitable for the development of technological methods of monitoring. Large population and citizens' participation feasibility using VGI can have a positive effect on developing countries. Finally, by using F-VGI that ensures the validity and accuracy of data we can access an appropriate platform that leads us to suitable model for environment monitoring in the form of the application.

  19. Monitoring road safety development at regional level: A case study in the ASEAN region.

    Science.gov (United States)

    Chen, Faan; Wang, Jianjun; Wu, Jiaorong; Chen, Xiaohong; Zegras, P Christopher

    2017-09-01

    Persistent monitoring of progress, evaluating the results of interventions and recalibrating to achieve continuous improvement over time is widely recognized as being crucial towards the successful development of road safety. In the ASEAN (Association of Southeast Asian Nations) region there is a lack of well-resourced teams that contain multidisciplinary safety professionals, and specialists in individual countries, who are able to carry out this work effectively. In this context, not only must the monitoring framework be effective, it must also be easy to use and adapt. This paper provides a case study that can be easily reproduced; based on an updated and refined Road Safety Development Index (RSDI), by means of the RSR (Rank-sum ratio)-based model, for monitoring/reporting road safety development at regional level. The case study was focused on the road safety achievements in eleven Southeast Asian countries; identifying the areas of poor performance, potential problems and delays. These countries are finally grouped into several classes based on an overview of their progress and achievements regarding to road safety. The results allow the policymakers to better understand their own road safety progress toward their desired impact; more importantly, these results enable necessary interventions to be made in a quick and timely manner. Keeping action plans on schedule if things are not progressing as desired. This would avoid 'reinventing the wheel' and trial and error approaches to road safety, making the implementation of action plans more effective. Copyright © 2017 Elsevier Ltd. All rights reserved.

  20. Phase II: Field Detector Development For Undeclared/Declared Nuclear Testing For Treaty Verfiation Monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Kriz, M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Hunter, D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Riley, T. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-10-02

    Radioactive xenon isotopes are a critical part of the Comprehensive Nuclear Test Ban Treaty (CTBT) for the detection or confirmation of nuclear weapons tests as well as on-site treaty verification monitoring. On-site monitoring is not currently conducted because there are no commercially available small/robust field detector devices to measure the radioactive xenon isotopes. Xenon is an ideal signature to detect clandestine nuclear events since they are difficult to contain and can diffuse and migrate through soils due to their inert nature. There are four key radioxenon isotopes used in monitoring: 135Xe (9 hour half-life), 133mXe (2 day half-life), 133Xe (5 day half-life) and 131mXe (12 day half-life) that decay through beta emission and gamma emission. Savannah River National Laboratory (SRNL) is a leader in the field of gas collections and has developed highly selective molecular sieves that allow for the collection of xenon gas directly from air. Phase I assessed the development of a small, robust beta-gamma coincidence counting system, that combines collection and in situ detection methodologies. Phase II of the project began development of the custom electronics enabling 2D beta-gamma coincidence analysis in a field portable system. This will be a significant advancement for field detection/quantification of short-lived xenon isotopes that would not survive transport time for laboratory analysis.

  1. Indigenous design, development and calibration of an online 131I monitor

    International Nuclear Information System (INIS)

    Ajoy, K.C.; Dhanasekaran, A.; Santhanam, R.; Rajagopal, V.; Jose, M.T.; Achuthan

    2014-01-01

    Reprocessing of spent fuels result in release of radioactive gases, vapours and volatile fission products. Monitoring of the gaseous effluents in the stack is mandatory to ensure compliance with the discharge limits specified by the regulatory agency. Though the fuel that is being reprocessed at COmpact Reprocessing of Advanced Lead cells (CORAL) at Kalpakkam are sufficiently cooled resulting in significant decay of all the iodine 129 I, any other major event could result in release of 131 I. In CORAL, as a matter of abundant caution and due to the possibility of processing highburn up, short cooled fuels, discharge limits are specified for Iodine also. Previously, monitoring of iodine was done offline using charcoal cartridges but present paper highlights the indigenous design, development and calibration of an online 131 I monitor for stack. The estimated activity in one litre bottle was 4.396 nCi/ml. Assuming the same activity is dispensed in the sampling head, the efficiency for the sampling head was estimated to be 0.029 counts/Bq. Integrity of the sampling head was established by analysing the data obtained from repeated counting of the sampling head at fixed intervals. The online iodine monitor is presently installed in the existing stack sampling system with data logging facility and is connected to the Radiation Data Acquisition System at CORAL

  2. Development of an area monitor for neutrons using solid state nuclear track detector

    International Nuclear Information System (INIS)

    Zahn, G.S.

    1994-01-01

    An area monitor for neutrons composed of the solid state nuclear track detector (SSNTD) Makrofol DE, together with a (n,α) converter, in the center of a 25 cm diameter polyethylene sphere, is developed. The optimal electrochemical etching conditions for the detection of thermal neutrons by the Makrofol DE using the BN converter are studied, leading to the choice of 55 min, at 30 0 C, under a 44,2 kV.cm -1 electric field with oscillation frequency of 2,0 khz. The response of this system to thermal neutrons, in the optimal conditions, is of 2,76(10)x 10 -3 tr/n. Changing from the BN converter to a 2,73(3)g compressed boric acid tablet this value lowers to 3,88(17)x 10 -4 tr/n. The performance of the whole monitor in the detection of fast neutrons is examined using the BN converter and neutrons from a 241 Am Be source, with a response of 4,4(2)x 10 3 tr.mSv -1 .cm -2 and operational limits between 7(3)μSv and 5,6(2)mSv. The result of the monitoring of the control room of the IPEN Cyclotron accelerator are also presented as a final test for the viability of the practical use of the monitor. (author). 34 refs, 15 figs, 6 tabs, 1 app

  3. Development of a gear vibration indicator and its application in gear wear monitoring

    Science.gov (United States)

    Hu, Chongqing; Smith, Wade A.; Randall, Robert B.; Peng, Zhongxiao

    2016-08-01

    Gear tooth wear is an inevitable phenomenon and has a significant influence on gear dynamic features. Although vibration analysis has been widely used to diagnose localised gear tooth faults, its techniques for gear wear monitoring have not been well-established. This paper aims at developing a vibration indicator to evaluate the effects of wear on gear performance. For this purpose, a gear state vector is extracted from time synchronous averaged gear signals to describe the gear state. This gear state vector consists of the sideband ratios obtained from a number of tooth meshing harmonics and their sidebands. Then, two averaged logarithmic ratios, ALR and mALR, are defined with fixed and moving references, respectively, to provide complementary information for gear wear monitoring. Since a fixed reference is utilised in the definition of ALR, it reflects the cumulated wear effects on the gear state. An increase in the ALR value indicates that the gear state deviates further from its reference condition. With the use of a moving reference, the indicator mALR shows changes in the gear state within short time intervals, making it suitable for wear process monitoring. The efficiency of these vibration indicators is demonstrated using experimental results from two sets of tests, in which the gears experienced different wear processes. In addition to gear wear monitoring, the proposed indicators can be used as general parameters to detect the occurrence of other faults, such as a tooth crack or shaft misalignment, because these faults would also change the gear vibrations.

  4. Development of an Intelligent Monitoring System for Geological Carbon Sequestration (GCS) Systems

    Science.gov (United States)

    Sun, A. Y.; Jeong, H.; Xu, W.; Hovorka, S. D.; Zhu, T.; Templeton, T.; Arctur, D. K.

    2016-12-01

    To provide stakeholders timely evidence that GCS repositories are operating safely and efficiently requires integrated monitoring to assess the performance of the storage reservoir as the CO2 plume moves within it. As a result, GCS projects can be data intensive, as a result of proliferation of digital instrumentation and smart-sensing technologies. GCS projects are also resource intensive, often requiring multidisciplinary teams performing different monitoring, verification, and accounting (MVA) tasks throughout the lifecycle of a project to ensure secure containment of injected CO2. How to correlate anomaly detected by a certain sensor to events observed by other devices to verify leakage incidents? How to optimally allocate resources for task-oriented monitoring if reservoir integrity is in question? These are issues that warrant further investigation before real integration can take place. In this work, we are building a web-based, data integration, assimilation, and learning framework for geologic carbon sequestration projects (DIAL-GCS). DIAL-GCS will be an intelligent monitoring system (IMS) for automating GCS closed-loop management by leveraging recent developments in high-throughput database, complex event processing, data assimilation, and machine learning technologies. Results will be demonstrated using realistic data and model derived from a GCS site.

  5. Monitoring Forest Change in Landscapes Under-Going Rapid Energy Development: Challenges and New Perspectives

    Directory of Open Access Journals (Sweden)

    Paul D. Pickell

    2014-07-01

    Full Text Available The accelerated development of energy resources around the world has substantially increased forest change related to oil and gas activities. In some cases, oil and gas activities are the primary catalyst of land-use change in forested landscapes. We discuss the challenges associated with characterizing ecological change related to energy resource development using North America as an exemplar. We synthesize the major impacts of energy development to forested ecosystems and offer new perspectives on how to detect and monitor anthropogenic disturbance during the Anthropocene. The disturbance of North American forests for energy development has resulted in persistent linear corridors, suppression of historical disturbance regimes, novel ecosystems, and the eradication of ecological memory. Characterizing anthropogenic disturbances using conventional patch-based disturbance measures will tend to underestimate the ecological impacts of energy development. Suitable indicators of anthropogenic impacts in forests should be derived from the integration of multi-scalar Earth observations. Relating these indicators to ecosystem condition will be a capstone in the progress toward monitoring forest change in landscapes undergoing rapid energy development.

  6. Threshold levels of hepatocyte nuclear factor 6 (HNF-6) acting in synergy with HNF-4 and PGC-1alpha are required for time-specific gene expression during liver development.

    Science.gov (United States)

    Beaudry, Jean-Bernard; Pierreux, Christophe E; Hayhurst, Graham P; Plumb-Rudewiez, Nicolas; Weiss, Mary C; Rousseau, Guy G; Lemaigre, Frédéric P

    2006-08-01

    During liver development, hepatocytes undergo a maturation process that leads to the fully differentiated state. This relies at least in part on the coordinated action of liver-enriched transcription factors (LETFs), but little is known about the dynamics of this coordination. In this context we investigate here the role of the LETF hepatocyte nuclear factor 6 (HNF-6; also called Onecut-1) during hepatocyte differentiation. We show that HNF-6 knockout mouse fetuses have delayed expression of glucose-6-phosphatase (g6pc), which catalyzes the final step of gluconeogenesis and is a late marker of hepatocyte maturation. Using a combination of in vivo and in vitro gain- and loss-of-function approaches, we demonstrate that HNF-6 stimulates endogenous g6pc gene expression directly via a synergistic and interdependent action with HNF-4 and that it involves coordinate recruitment of the coactivator PGC-1alpha. The expression of HNF-6, HNF-4, and PGC-1alpha rises steadily during liver development and precedes that of g6pc. We provide evidence that threshold levels of HNF-6 are required to allow synergism between HNF-6, HNF-4, and PGC-1alpha to induce time-specific expression of g6pc. Our observations on the regulation of g6pc by HNF-6 provide a model whereby synergism, interdependency, and threshold concentrations of LETFs and coactivators determine time-specific expression of genes during liver development.

  7. Development of real time abdominal compression force monitoring and visual biofeedback system

    Science.gov (United States)

    Kim, Tae-Ho; Kim, Siyong; Kim, Dong-Su; Kang, Seong-Hee; Cho, Min-Seok; Kim, Kyeong-Hyeon; Shin, Dong-Seok; Suh, Tae-Suk

    2018-03-01

    In this study, we developed and evaluated a system that could monitor abdominal compression force (ACF) in real time and provide a surrogating signal, even under abdominal compression. The system could also provide visual-biofeedback (VBF). The real-time ACF monitoring system developed consists of an abdominal compression device, an ACF monitoring unit and a control system including an in-house ACF management program. We anticipated that ACF variation information caused by respiratory abdominal motion could be used as a respiratory surrogate signal. Four volunteers participated in this test to obtain correlation coefficients between ACF variation and tidal volumes. A simulation study with another group of six volunteers was performed to evaluate the feasibility of the proposed system. In the simulation, we investigated the reproducibility of the compression setup and proposed a further enhanced shallow breathing (ESB) technique using VBF by intentionally reducing the amplitude of the breathing range under abdominal compression. The correlation coefficient between the ACF variation caused by the respiratory abdominal motion and the tidal volume signal for each volunteer was evaluated and R 2 values ranged from 0.79 to 0.84. The ACF variation was similar to a respiratory pattern and slight variations of ACF ranges were observed among sessions. About 73-77% average ACF control rate (i.e. compliance) over five trials was observed in all volunteer subjects except one (64%) when there was no VBF. The targeted ACF range was intentionally reduced to achieve ESB for VBF simulation. With VBF, in spite of the reduced target range, overall ACF control rate improved by about 20% in all volunteers except one (4%), demonstrating the effectiveness of VBF. The developed monitoring system could help reduce the inter-fraction ACF set up error and the intra fraction ACF variation. With the capability of providing a real time surrogating signal and VBF under compression, it could

  8. Monitoring implementation of city development strategy: The case study of Pančevo

    Directory of Open Access Journals (Sweden)

    Mikavica Mihailo

    2017-01-01

    Full Text Available This paper is the result of the research project carried out as part of the Master program Integral Urbanism at Faculty of Architecture, University of Belgrade. The main focus of master's thesis was 'Instruments for Governing Integral Urban Development'. In year 2016, polygon used to create a master projects was the territory of the City of Pančevo, a development framework was: 'City Development Strategy of Pančevo for the Period 2014-2020'. Considering issues and potential improvement opportunities of the city, after research and analysis, we have chosen the research theme 'Implementation Monitoring of City Development Strategy - The Case Study of Pančevo'. The paper outlines the broader framework of urban development management to understand the implementation of new instruments of urban governance in local context of the City of Pančevo. The focus is on instruments that improve process of the monitoring of implementation of local development strategies - human resources, financing, institutionalization and participation. The results of this master project relate to the proposals for improving monitoring of the implementation strategy, including the manner and structure of reporting, establishing a team to implement the strategy as a permanent body, linking funding strategy with the program budget of the city and improving public participation and transparency in decision-making in the process of implementing the strategy. Results are derived from the research presented in this paper, and listed for better overview and operationalization issues in a local context. The focus of this work is on understanding the capacity of institutionalization of changes in the domain of urban governance in the local context in Serbia.

  9. Cost-effectiveness thresholds: pros and cons.

    Science.gov (United States)

    Bertram, Melanie Y; Lauer, Jeremy A; De Joncheere, Kees; Edejer, Tessa; Hutubessy, Raymond; Kieny, Marie-Paule; Hill, Suzanne R

    2016-12-01

    Cost-effectiveness analysis is used to compare the costs and outcomes of alternative policy options. Each resulting cost-effectiveness ratio represents the magnitude of additional health gained per additional unit of resources spent. Cost-effectiveness thresholds allow cost-effectiveness ratios that represent good or very good value for money to be identified. In 2001, the World Health Organization's Commission on Macroeconomics in Health suggested cost-effectiveness thresholds based on multiples of a country's per-capita gross domestic product (GDP). In some contexts, in choosing which health interventions to fund and which not to fund, these thresholds have been used as decision rules. However, experience with the use of such GDP-based thresholds in decision-making processes at country level shows them to lack country specificity and this - in addition to uncertainty in the modelled cost-effectiveness ratios - can lead to the wrong decision on how to spend health-care resources. Cost-effectiveness information should be used alongside other considerations - e.g. budget impact and feasibility considerations - in a transparent decision-making process, rather than in isolation based on a single threshold value. Although cost-effectiveness ratios are undoubtedly informative in assessing value for money, countries should be encouraged to develop a context-specific process for decision-making that is supported by legislation, has stakeholder buy-in, for example the involvement of civil society organizations and patient groups, and is transparent, consistent and fair.

  10. Using Item Response Theory to Develop Measures of Acquisitive and Protective Self-Monitoring From the Original Self-Monitoring Scale.

    Science.gov (United States)

    Wilmot, Michael P; Kostal, Jack W; Stillwell, David; Kosinski, Michal

    2017-07-01

    For the past 40 years, the conventional univariate model of self-monitoring has reigned as the dominant interpretative paradigm in the literature. However, recent findings associated with an alternative bivariate model challenge the conventional paradigm. In this study, item response theory is used to develop measures of the bivariate model of acquisitive and protective self-monitoring using original Self-Monitoring Scale (SMS) items, and data from two large, nonstudent samples ( Ns = 13,563 and 709). Results indicate that the new acquisitive (six-item) and protective (seven-item) self-monitoring scales are reliable, unbiased in terms of gender and age, and demonstrate theoretically consistent relations to measures of personality traits and cognitive ability. Additionally, by virtue of using original SMS items, previously collected responses can be reanalyzed in accordance with the alternative bivariate model. Recommendations for the reanalysis of archival SMS data, as well as directions for future research, are provided.

  11. Historical achievements of self-monitoring of blood glucose technology development in Japan.

    Science.gov (United States)

    Yamada, Shigeki

    2011-09-01

    Japanese companies were the first in the world to achieve a colorimetric glucose measurement meter back in 1973. Over the following 40 or so years, they succeeded in achieving a much greater level of user-friendliness and performance and in so doing, have contributed to the spread of self-monitoring of blood glucose. This article aims to unravel the history of blood glucose measurement's technological developments; to look at the direction and features of the development path Japan is taking; as well as to introduce some Japanese products that are on the market. © 2011 Diabetes Technology Society.

  12. Development of Structural Health Monitoring System for pipes in Nuclear Power Plants

    International Nuclear Information System (INIS)

    Eom, H. S.; Choi, Y. C.; Shin, S. H.; Youn, D. B.; Park, J. H.

    2010-01-01

    Structural health monitoring (SHM) has becoming an important issue in the maintenance of various structures such as large steel plates, vessels, and pipes in nuclear power plants. There are important factors to be considered in developing an SHM system. With consideration of these factors, we have developed a computerized multi-channel ultrasonic system that can handle array transducers and generate a high-power pulse for online SHM of the plates and pipes. The proposed system is compact but has all the necessary functions for SHM of important structure such as pipes and plates in a NPP

  13. Draft Plan to Develop Non-Intrusive Load Monitoring Test Protocols

    Energy Technology Data Exchange (ETDEWEB)

    Mayhorn, Ebony T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sullivan, Greg P. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Petersen, Joseph M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Baechler, Michael C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-09-29

    This document presents a Draft Plan proposed to develop a common test protocol that can be used to evaluate the performance requirements of Non-Intrusive Load Monitoring. Development on the test protocol will be focused on providing a consistent method that can be used to quantify and compare the performance characteristics of NILM products. Elements of the protocols include specifications for appliances to be used, metrics, instrumentation, and a procedure to simulate appliance behavior during tests. In addition, three priority use cases for NILM will be identified and their performance requirements will specified.

  14. Development on the periphery: monitoring science, technology and innovation for sustainable development among Pacific Island Countries

    Energy Technology Data Exchange (ETDEWEB)

    Amaradasa, R.; Turpin, T

    2016-07-01

    This paper reviews the status of science, technology and innovation indicators in Fiji and other Pacific Island countries. Data are drawn from interviews with senior officials in Fiji, regional policy documents, and data held at the University of the South Pacific. The limited data available is mostly held in separate national agencies with little national or regional collaboration. The paper argues that the paucity of S&T data available for policy making or analysis is symptomatic of the nature of development in the region and the inappropriateness of indicators designed primarily for industrialised economies. It concludes with an observation that the drive toward sustainable development is steering a regional move toward development of an S,T&I indicator hub located across one or more Pacific Island countries. (Author)

  15. SIMAC: Development and implementation of a coral reef monitoring network in Colombia

    Directory of Open Access Journals (Sweden)

    Jaime Garzón-Ferreira

    2010-05-01

    Full Text Available Significant coral reef decline has been observed in Colombia during the last three decades. However, due to the lack of monitoring activities, most of the information about health and changes was fragmentary or inadequate. To develop an expanded nation-wide reef-monitoring program, in 1998 INVEMAR (Instituto de Investigaciones Marinas y Costeras: "Colombian Institute of Marine and Coastal Research" designed and implemented SIMAC (Sistema Nacional de Monitoreo de Arrecifes Coralinos en Colombia: "National Monitoring System of Coral Reefs in Colombia" with the participation of other institutions. By the end of 2003 the SIMAC network reached more than twice its initial size, covering ten reef areas (seven in the Caribbean and three in the Pacific, 63 reef sites and 263 permanent transects. SIMAC monitoring continued without interruption until 2008 and should persist in the long-term. The SIMAC has a large database and consists basically of water quality measurements (temperature, salinity, turbidity and a yearly estimation of benthic reef cover, coral disease prevalence, gorgonian density, abundance of important mobile invertebrates, fish diversity and abundance of important fish species. A methods manual is available in the internet. Data and results of SIMAC have been widely circulated through a summary report published annually since 2000 for the Colombian environmental agencies and the general public, as well as numerous national and international scientific papers and presentations at meetings. SIMAC information has contributed to support regional and global reef monitoring networks and databases (i.e. CARICOMP, GCRMN, ReefBase. Rev. Biol. Trop. 58 (Suppl. 1: 67-80. Epub 2010 May 01.

  16. Threshold Concepts and Information Literacy

    Science.gov (United States)

    Townsend, Lori; Brunetti, Korey; Hofer, Amy R.

    2011-01-01

    What do we teach when we teach information literacy in higher education? This paper describes a pedagogical approach to information literacy that helps instructors focus content around transformative learning thresholds. The threshold concept framework holds promise for librarians because it grounds the instructor in the big ideas and underlying…

  17. The Nature of Psychological Thresholds

    Science.gov (United States)

    Rouder, Jeffrey N.; Morey, Richard D.

    2009-01-01

    Following G. T. Fechner (1966), thresholds have been conceptualized as the amount of intensity needed to transition between mental states, such as between a states of unconsciousness and consciousness. With the advent of the theory of signal detection, however, discrete-state theory and the corresponding notion of threshold have been discounted.…

  18. Towards development of a fiber optic-based transmission monitoring system

    Science.gov (United States)

    Baldwin, Chris S.; Kiddy, Jason S.; Samuel, Paul D.

    2011-06-01

    There is interest in the rotorcraft community to develop health monitoring technologies. Among these technologies is the ability to monitor the transmission planetary gear system. The gearbox environment does not lend itself to traditional sensing technologies due to the harsh environment and crowed space. Traditional vibration-based diagnostics are based on the output from externally mounted sensors, usually accelerometers fixed to the gearbox exterior. This type of system relies on the ability of the vibration signal to travel from the gears through the gearbox housing. These sensors are also susceptible to other interference including electrical magnetic interference (EMI). For these reasons, the development of a fiber optic-based transmission monitoring system represents an appealing alternative to the accelerometer due to their resistance to EMI and other signal corrupting influences. Aither Engineering has been working on integrating the fiber optic sensors into the gearbox environment to measure strain on the ring gear of the planetary gear system. This application utilizes a serial array of wavelength division multiplexed fiber Bragg grating (FBG) sensors. Work in this area has been conducted at both the University of Maryland, College Park and more recently at the NASA Glenn Research Center (NGRC) OH-58 transmission test rig facility. This paper discusses some of the testing results collected from the fiber optic ring gear sensor array. Based on these results, recommendations for system requirements are addressed in terms of the capabilities of the FBG instrumentation.

  19. Development and evaluation of optical fiber NH3 sensors for application in air quality monitoring

    Science.gov (United States)

    Huang, Yu; Wieck, Lucas; Tao, Shiquan

    2013-02-01

    Ammonia is a major air pollutant emitted from agricultural practices. Sources of ammonia include manure from animal feeding operations and fertilizer from cropping systems. Sensor technologies with capability of continuous real time monitoring of ammonia concentration in air are needed to qualify ammonia emissions from agricultural activities and further evaluate human and animal health effects, study ammonia environmental chemistry, and provide baseline data for air quality standard. We have developed fiber optic ammonia sensors using different sensing reagents and different polymers for immobilizing sensing reagents. The reversible fiber optic sensors have detection limits down to low ppbv levels. The response time of these sensors ranges from seconds to tens minutes depending on transducer design. In this paper, we report our results in the development and evaluation of fiber optic sensor technologies for air quality monitoring. The effect of change of temperature, humidity and carbon dioxide concentration on fiber optic ammonia sensors has been investigated. Carbon dioxide in air was found not interfere the fiber optic sensors for monitoring NH3. However, the change of humidity can cause interferences to some fiber optic NH3 sensors depending on the sensor's transducer design. The sensitivity of fiber optic NH3 sensors was found depends on temperature. Methods and techniques for eliminating these interferences have been proposed.

  20. Development and optimization of a noncontact optical device for online monitoring of jaundice in human subjects

    Science.gov (United States)

    Polley, Nabarun; Saha, Srimoyee; Singh, Soumendra; Adhikari, Aniruddha; Das, Sukhen; Choudhury, Bhaskar Roy; Pal, Samir Kumar

    2015-06-01

    Jaundice is one of the notable markers of liver malfunction in our body, revealing a significant rise in the concentration of an endogenous yellow pigment bilirubin. We have described a method for measuring the optical spectrum of our conjunctiva and derived pigment concentration by using diffused reflection measurement. The method uses no prior model and is expected to work across the races (skin color) encompassing a wide range of age groups. An optical fiber-based setup capable of measuring the conjunctival absorption spectrum from 400 to 800 nm is used to monitor the level of bilirubin and is calibrated with the value measured from blood serum of the same human subject. We have also developed software in the LabVIEW platform for use in online monitoring of bilirubin levels in human subjects by nonexperts. The results demonstrate that relative absorption at 460 and 600 nm has a distinct correlation with that of the bilirubin concentration measured from blood serum. Statistical analysis revealed that our proposed method is in agreement with the conventional biochemical method. The innovative noncontact, low-cost technique is expected to have importance in monitoring jaundice in developing/underdeveloped countries, where the inexpensive diagnosis of jaundice with minimally trained manpower is obligatory.

  1. Developing a tool to preserve eye contact with patients undergoing colonoscopy for pain monitoring

    Directory of Open Access Journals (Sweden)

    Niv Y

    2012-08-01

    Full Text Available Yaron Niv, Yossi TalDepartment of Gastroenterology, Rabin Medical Center, Tel Aviv University, IsraelAbstract: Colonoscopy has become the leading procedure for early detection and prevention of colorectal cancer. Patients’ experience of colonic endoscopic procedures is scarcely reported, even though it is considered a major factor in colorectal cancer screening participation. Pain due to air inflation or stretching the colon with an endoscope is not rare during examination and may be the main obstacle to cooperation and participation in a screening program. We propose a four-stage study for developing a tool dedicated to pain monitoring during colonoscopy, as follows: (1 comparison of patient, nurse, and endoscopist questionnaire responses about patient pain and technical details of the procedure using the PAINAD tool during colonoscopy; (2 observation of the correlation between patients’ facial expressions and other parameters (using the short PAINAD; (3 development of a device for continuous monitoring of the patient’s facial expression during the procedure; (4 assessment of the usability of such a tool and its contribution to the outcomes of colonoscopy procedures. Early intervention by the staff performing the procedure, in reaction to alerts encoded by this tool, may prevent adverse events during the procedure.Keywords: pain scoring, colonoscopy, pain monitoring, facial expression

  2. Results of Recent DOE Research on Development of Cable Condition Monitoring and Aging Management Technologies

    International Nuclear Information System (INIS)

    Campbell, C.J.; McConkey, J.B.; Hashemian, H.M.; Sexton, C.D.; Cummins, D.S.

    2012-01-01

    Analysis and Measurement Services (AMS) Corporation has been conducting two research projects focused on understanding cable aging and developing cable condition monitoring technologies for nuclear power plants. The goal of the first project is to correlate cable faults with testing techniques that can identify and locate the faults whether they are in the cable, conductor, or the insulation. This project involves laboratory experiments using low and medium voltage cable types typically installed in nuclear power plants. The second project is focused on development of an integrated cable condition monitoring system for nuclear facilities. This system integrates a number of cable testing and cable condition monitoring techniques, such as the time domain reflectometry (TDR), frequency domain reflectometry (FDR), inductance, capacitance, resistance (LCR), reverse TDR (RTDR), current-to-voltage (IV) for testing of nuclear instrumentation sensors, insulation resistance (IR) and other techniques. The purpose of the project is to combine all proven technologies into one system to detect and pinpoint problems in cable circuits as well as cable insulation, shield, or jacket material. (author)

  3. Developing a Real Time Sensing System to Monitor Bacteria in Wound Dressings

    Directory of Open Access Journals (Sweden)

    Patricia Connolly

    2012-05-01

    Full Text Available Infection control is a key aspect of wound management strategies. Infection results in chemical imbalances and inflammation in the wound and may lead to prolonged healing times and degradation of the wound surface. Frequent changing of wound dressings may result in damage to healing tissues and an increased risk of infection. This paper presents the first results from a monitoring system that is being developed to detect presence and growth of bacteria in real time. It is based on impedance sensors that could be placed at the wound-dressing interface and potentially monitor bacterial growth in real time. As wounds can produce large volumes of exudate, the initial system reported here was developed to test for the presence of bacteria in suspension. Impedance was measured using disposable silver-silver chloride electrodes. The bacteria Staphylococcus aureus were chosen for the study as a species commonly isolated from wounds. The growth of bacteria was confirmed by plate counting methods and the impedance data were analysed for discernible differences in the impedance profiles to distinguish the absence and/or presence of bacteria. The main findings were that the impedance profiles obtained by silver-silver chloride sensors in bacterial suspensions could detect the presence of high cell densities. However, the presence of the silver-silver chloride electrodes tended to inhibit the growth of bacteria. These results indicate that there is potential to create a real time infection monitor for wounds based upon impedance sensing.

  4. The development of state/region owned goods management’s monitoring instrument design

    Directory of Open Access Journals (Sweden)

    Ikhwanto Yogy

    2017-01-01

    Full Text Available The problems in state/region owned goods in Indonesian state and local governments are suspected to occur because of weak monitoring programs, according to many studies. A tool or instrument in implementing this monitoring program is expected to address this problem. Such tool currently doesn’t exist yet. This research aims to fill that gap by developing a monitoring instrument design for state/region owned goods by using Daerah Istimewa Yogyakarta (DIY Local Government as a research context in order to take valuable inputs for the design. This research is using developmental research method. Government Regulation were used for normative reference and Friedman’s results-based accountability quadrat were used in developing good indicators for the instrument. This research is succeeded in formulating the indicators that made up the instrument. Indicators compiled are divided into compliance-based indicators and results-based indicators. Indicators are formulated based on the validation and inputs from employees of DIY’s Assets Management Agency and experts from academia. This instrument still has some limitations that need improvement through further research.

  5. Development and evaluation of a new method for sampling and monitoring the symphylid population in pineapple.

    Science.gov (United States)

    Soler, Alain; Gaude, Jean-Marie; Marie-Alphonsine, Paul-Alex; Vinatier, Fabrice; Dole, Bernard; Govindin, Jean-Claude; Fournier, Patrick; Queneherve, Patrick

    2011-09-01

    Symphylids (Hanseniella sp.) are polyphagous soilborne parasites. Today, symphylid populations on pineapple are monitored by observing root symptoms and the presence of symphylids at the bottom of basal leaves. The authors developed a reliable method with a bait and trap device to monitor symphylid populations in pineapple or fallow crops. The spatial distribution of the symphylid populations was evaluated using the variance/mean ratios and spatial analyses based on Moran's and Geary's indices. The method has been tested to monitor symphylid populations at different developmental stages of pineapple. Adding potato baits to the soil samples increased the trapping efficiency of symphylids when compared with 'soil only' and 'bait only' methods. The handling of the samples is also facilitated by the new device. Results showed that the vertical distribution of symphylids may be uniform deeply inside the soil profile under pineapple, up to 50 cm. Results showed that symphylid populations are highly aggregated, showing a spot area about 4-6 m wide for their development. The new method allows better and easier evaluation of symphylid populations. It may be very useful in the evaluation of new IPM methods to control symphylids under pineapple. Copyright © 2011 Society of Chemical Industry.

  6. Raynaud's syndrome in children: systematic review and development of recommendations for assessment and monitoring.

    Science.gov (United States)

    Pain, Clare E; Constantin, Tamás; Toplak, Natasa; Moll, Monica; Iking-Konert, Christof; Piotto, Daniella P; Aktay Ayaz, Nuray; Nemcova, Dana; Hoeger, Peter H; Cutolo, Maurizio; Smith, Vanessa; Foeldvari, Ivan

    2016-01-01

    To develop recommendations for investigation and monitoring of children with Raynaud's syndrome, based on paediatric evidence collated by a systematic review. A systematic review was undertaken to establish the paediatric evidence for assessment and monitoring of Raynaud's syndrome. An expert panel including members of the Paediatric Rheumatology European Society (PRES) Scleroderma Working Group, were invited to a consensus meeting where recommendations were developed based on evidence graded by the systematic review and where evidence was lacking, consensus opinion. A nominal technique was used where 75% consensus was taken as agreement. The expert panel recommended testing anti-nuclear antibody (ANA), more specific antibodies associated with connective tissue disease and nail-fold capillaroscopy in all children presenting with Raynaud's syndrome as data suggests these can be risk factors for evolution into a connective tissue disease. The frequency of follow-up recommended depends on presence of these risk factors with the aim to detect evolving connective tissue disease early in high risk individuals. Those with no abnormalities on capillaroscopy and negative autoantibodies were deemed low risk of progression, whereas those with ANA positivity, specific autoantibodies and/or nailfold capillary changes were deemed high risk and more frequent follow-up was recommended. Recommendations, primarily based on consensus opinion, were agreed regarding investigation and monitoring of children who present with Raynaud's syndrome. Further prospective studies are needed to better define the risk factors for progression to connective tissue disease.

  7. SUMMARY OF MONITORING SYSTEMS PROFESSIONAL READINESS OF STUDENTS TO COMMUNICATIVELY-SPEECH DEVELOPMENT IN PRESCHOOLERS BILINGUAL

    Directory of Open Access Journals (Sweden)

    Neonila Vyacheslavovna Ivanova

    2015-12-01

    Full Text Available Purpose. The article describes the main provisions of the monitoring system of professional readiness of the future teachers of pre-school education.Methodology. Presented in the paper position monitoring system of professional readiness of students to develop communicative speech bilingual children in the profil «Preschool education» are analized based on the principles: compliance with the general content of the training and disciplinary purposes of vocational training; Unity of its substantive and procedural right; structural integrity of the contents; orientation of its content for the implementation of the system, the personal, the activity, polysubject (Dialogic, cultural approaches.Results. We studid and summarized some of the theoretical and practical aspects, given the scientific substantiation of organizational methods of monitoring of professional readiness of the future teachers to the communicative and language development of preschool children bilingual.Practical implications. Еducational system of higher education.

  8. The development of daily monitoring tool in a service part manufacturing company

    Science.gov (United States)

    Marpaung, Seamus Tadeo; Rosyidi, Cucuk Nur

    2018-02-01

    Production lead time is one of the key measures to assess whether a production system is running well or not. A short lead time will lead to higher customer satisfaction and will be a solid proof that a system is well-organized. To shorten the production lead time, a good production planning and control are required. There are many obstacles which can occur at any time, for instance shortage of material and worker, or poor production scheduling. Service Parts Planning Department works with many parties from the beginning of service parts production until it is delivered to the customer. This research was conducted to find an appropriate production monitoring tool for Service Parts Planning Department, which is a control method that make problems appears to the surface and can be overcome quickly so that the production process can run normally. The tool development started with a field study to find out the production flow from start to finish, a literature review and a interview with some employees who will later use the production control tool, and the creation of a daily control that went through several modifications until finally meet the needs of the department. In this research, a production monitoring tool which is developed can be used to monitor the entire order status, the production lead time, and also serves as the records and reports for presentation.

  9. Development of SmartStep: an insole-based physical activity monitor.

    Science.gov (United States)

    Sazonov, Edward S; Hegde, Nagaraj; Tang, Wenlong

    2013-01-01

    In our previous research we developed a SmartShoe--a shoe based physical activity monitor that can reliably differentiate between major postures and activities, accurately estimate energy expenditure of individuals, measure temporal gait parameters, and estimate body weights. In this paper we present the development of the next stage of the SmartShoe evolution--SmartStep, a physical activity monitor that is fully integrated into an insole, maximizing convenience and social acceptance of the monitor. Encapsulating the sensors, Bluetooth Low Energy wireless interface and the energy source within an assembly repeatedly loaded with high forces created during ambulation presented new design challenges. In this preliminary study we tested the ability of the SmartStep to measure the pressure differences between static weight-bearing and non-weight-bearing activities (such as no load vs. sitting vs. standing) as well as capture pressure variations during walking. We also measured long-term stability of the sensors and insole assembly under cyclic loading in a mechanical testing system.

  10. Development of a smartphone application for eating disorder self-monitoring.

    Science.gov (United States)

    Tregarthen, Jenna P; Lock, James; Darcy, Alison M

    2015-11-01

    This case report aims to (1) describe the development and refinement of a smartphone application for eating disorder self-monitoring; (2) characterize its users in terms of demographic and clinical characteristics; and (3) explore its feasibility and utilization as a self-monitoring tool. We developed a mobile phone application through which people with eating disorders can self-monitor meals, emotions, behaviors, and thoughts. The application also included positive reinforcement, coping skill suggestions, social support, and feedback components. The app was made available on two Internet app stores. Data include number of downloads and subsequent usage statistics, consumer ratings on app-stores are used as indicators of satisfaction, anonymous aggregate demographic data and Eating Disorder Examination Questionnaire scores from 57,940 individuals collected over a two-year period. The app demonstrated population-level utilization with over 100,000 users over a two-year period. Almost 50% percent of users stated that they are not currently receiving clinical treatment and 33% reported they had not told anyone about their eating disorder. A surprising number of people with severe problems are using the app. Smartphone apps have the capacity to reach and engage traditionally underserved individuals with eating disorders at a large scale. Additional work is indicated for the evaluation of the clinical effectiveness of applications for specific user groups and in clinical treatment contexts. © 2015 Wiley Periodicals, Inc.

  11. Development of multi copter based autonomous unmanned aerial radiation monitoring system for the remote impact assessment of radiation emergencies

    International Nuclear Information System (INIS)

    Jose, Jis Romal; Gupta, Ashutosh; Bahadur, Shuchita; Chaudhury, Probal; Pradeepkumar, K.S.

    2016-01-01

    During any radiation emergency, the level and extent of radioactive contamination need to be monitored for the timely and effective implementation of countermeasures to reduce the radiation exposure to public. In such a scenario, radiation surveillance can be carried out using either ground based mobile monitoring techniques or aerial radiation monitoring. Aerial radiation monitoring is quick and capable of scanning the areas which are not easily accessible by the ground based mobile monitoring. Compact unmanned aerial vehicle based radiation surveillance system is ideal in above mentioned radiation emergency scenarios as it can be rapidly deployed in the affected area and radiation exposure to the monitoring personal can be totally avoided. This paper describes development of multi copter based autonomous unmanned aerial radiation monitoring system for the remote impact assessment of radiation emergencies

  12. Development of ICT for Leaching Monitoring in Taiwan Agricultural LTER Stations

    Directory of Open Access Journals (Sweden)

    Yankuang Chan

    2017-06-01

    Full Text Available In order to study the groundwater subsidy from different cropping systems, leaching monitoring in Taiwan started in 2008 and implemented agricultural long-term ecological research (LTER stations. Initially, leaching data was received by lysimeters, and then collected manually by laborers in the field twice per month. The cost of data collection and transmission is high, real-time monitoring is not possible, and maintenance of instruments is inefficient. In this study, the goal is to develop a data transmission path. ICT (Information and Communication Technology with different data transmission schemes was applied to improve the efficiency and immediacy of data transfer from the field to the databases in labs. Between 2010 and 2017, four versions of ICT have been developed and applied in LTER stations. WiFi, 2.5G (General Packet Radio Service, GPRS, 3G/4G network transmission, and Arduino cores are applied in different ICT versions. The first version of data transmission used data loggers, developed by the original factory, with a lower cost of renovation of instruments. However, complicated transmission paths, diverse instruments, poor weather resistance, and lack of wireless functionality are the limitations of the first version. Those limitations had been overcome by the second and third versions by using 2.5G (GPRS and 3G/4G network transmission, respectively. Nevertheless, these versions are limited to the processes of data compression and encryption transmission which were developed by the system vendors. In addition, data can only be collected through the webpage provided by the vendors, instead of being received directly from the database using SQL (Structured Query Language. This is inappropriate for advanced data treatment, organization, and analysis. Finally, the fourth version of data transmission has been developed using Arduino. This system allows redesigning of the data loggers and transmission instrument with more feasibility and

  13. Development of experimental in-situ Pu monitoring system based on passive gamma spectroscopy technique

    International Nuclear Information System (INIS)

    Kulkarni, C.P.; Vinod, M.; Paulson, M.; Das, D.; Ananthakrishnan, T.S.; Pithawa, C.K.; Debdas, A.; Udagatti, S.V.; Singh, Pratap; Rajendra Kumar

    2013-01-01

    To meet the requirements of in-situ 239 Pu monitoring at various stages of fuel reprocessing for NRB, an indigenous Pu monitoring system is developed by Electronics Division, BARC. The system is based on passive gamma spectroscopy technique and utilizes an advanced scintillation detector along-with compact spectroscopy hardware. The system hardware and application software have been installed at Control Lab, PREFRE-2, Tarapur for testing and evaluation. Quantification accuracy of better than 10% is achieved during the initial phase of evaluation. The system is targeted for quantification of Pu in samples drawn from Pu purification cycles with operational frequency of 3-5 samples in Round-The-Clock shifts. The system will significantly minimize manual handling of Pu samples in comparison with the existing methods. (author)

  14. Development of continuous monitor for multiple beta-ray nuclides in liquid radioactive waste

    Energy Technology Data Exchange (ETDEWEB)

    Nam, Uk Won; Seon, G. I.; Kong, G. N.; Chin, H.; Park, J. H.; Yuk, I. S.; Han, W. Y. [Korea Astronomy and Space Science Institute, Taejon (Korea, Republic of)

    2001-03-15

    Continuous monitor system of multiple beta-ray nuclides was designed conceptually while keeping the optimization and the automation in mind. The conincidence MCA was designed to maintain, repair and upgrade with ease. DSP was adopted to realize hardware function using software and to miniaturize the coincidence Multi Channel Analyzer (MCA). The MCA system showed 99% background rejection rate, and was applied well to gamma-ray system using {sup 60}C0. An algorithm using least square method was developed for simultaneous radioassay of multiple beta-ray nuclides. The algorithm was tested using the simulation and was applied to experimental data. The results show that the algorithm is suitable to continous monitor system of multiple beta-ray nuclides.

  15. Development of a nanowire based titanium needle probe sensor for glucose monitoring

    Science.gov (United States)

    Deshpande, Devesh C.

    The need for continuous monitoring of various physiological functions such as blood glucose levels, neural functions and cholesterol levels has fostered the research and development of various schemes of biosensors to sense and help control the respective function. The needs of patients for sensors with minimal discomfort, longer life and better performance have necessitated the development towards smaller and more efficient sensors. In addition, the need for higher functionality from smaller sensors has led to the development of sensors with multiple electrodes, each electrode capable of sensing a different body function. Such multi-electrode sensors need to be fabricated using micro-fabrication processes in order to achieve precise control over the size, shape and placement of the electrodes. Multielectrode sensors fabricated using silicon and polymers have been demonstrated. One physiological function that attracts widespread interest is continuous glucose monitoring in our blood, since Diabetes affects millions of people all over the world. Significant deviations of blood glucose levels from the normal levels of 4-8 mM can cause fainting, coma and damage to the eyes, kidneys, nerves and blood vessels. For chronic patients, continuous monitoring of glucose levels is essential for accurate and timely treatment. A few continuous monitoring sensors are available in the market, but they have problems and cannot replace the strip type one-time glucose monitoring systems as yet. To address this need, large scale research efforts have been targeted towards continuous monitoring. The demand for higher accuracy and sensitivity has motivated researchers to evaluate the use of nanostructures in sensing. The large surface area-to-volume ratio of such structures could enable further miniaturization and push the detection limits, potentially enabling even single molecule detection. This research involved the development of a biocompatible titanium needle probe sensor for

  16. On Developing a Novel Versatile Framework for Heterogeneous Home Monitoring WSN networks

    Directory of Open Access Journals (Sweden)

    Ch. P. Antonopoulos

    2015-05-01

    Full Text Available The ability to deploy efficient and versatile WSN networks in the home environment is and will remain in the years to come a cornerstone objective in wireless networking. Respective services are continuously expanding requiring novel design and implementation approaches able to cover all relative present and even more importantly future requirements. This paper aims to present and convey knowledge and experience gained from such an effort in the context of home monitoring. Respective discussion covers all relative aspects and analyzes all critical challenges addressed ranging from identification and specification of the main requirements, to possible implementation approaches considered and finally the actual development undertaken. The final outcome considering the WSN home monitoring infrastructure as well as extracted knowledge and practical conclusions can be proven useful for further extending such an endeavour or even pursuing a different approach.

  17. Development of a cloud-based system for remote monitoring of a PVT panel

    Science.gov (United States)

    Saraiva, Luis; Alcaso, Adérito; Vieira, Paulo; Ramos, Carlos Figueiredo; Cardoso, Antonio Marques

    2016-10-01

    The paper presents a monitoring system developed for an energy conversion system based on the sun and known as thermophotovoltaic panel (PVT). The project was implemented using two embedded microcontrollers platforms (arduino Leonardo and arduino yún), wireless transmission systems (WI-FI and XBEE) and net computing ,commonly known as cloud (Google cloud). The main objective of the project is to provide remote access and real-time data monitoring (like: electrical current, electrical voltage, input fluid temperature, output fluid temperature, backward fluid temperature, up PV glass temperature, down PV glass temperature, ambient temperature, solar radiation, wind speed, wind direction and fluid mass flow). This project demonstrates the feasibility of using inexpensive microcontroller's platforms and free internet service in theWeb, to support the remote study of renewable energy systems, eliminating the acquisition of dedicated systems typically more expensive and limited in the kind of processing proposed.

  18. The Development of a Sub-Surface Monitoring System for Organic Contamination in Soils and Groundwater

    Directory of Open Access Journals (Sweden)

    Sharon L. Huntley

    2002-01-01

    Full Text Available A major problem when dealing with environmental contamination is the early detection and subsequent surveillance of the contamination. This paper describes the potential of sub-surface sensor technology for the early detection of organic contaminants in contaminated soils, sediments, and landfill sites. Rugged, low-power hydrocarbon sensors have been developed, along with a data-logging system, for the early detection of phase hydrocarbons in soil. Through laboratory-based evaluation, the ability of this system to monitor organic contamination in water-based systems is being evaluated. When used in conjunction with specific immunoassays, this can provide a sensitive and low-cost solution for long-term monitoring and analysis, applicable to a wide range of field applications.

  19. Development of a novel optical remote sensing monitor for fenceline monitoring and enhancement of existing leak detection and repair programs

    Science.gov (United States)

    Manual leak detection and repair (LDAR) programs are currently implemented on a regular basis at refinery sites to limit fugitive emissions of volatile organic compounds (VOC). However, LDAR surveys can be time-consuming and are not always cost-effective. Fence line monitoring of...

  20. Towards development of a deposition monitoring network for air pollution of Europe ; Deposition monitoring over the Speulder forest

    NARCIS (Netherlands)

    Erisman JW; Draaijers GPJ; Mennen MG; Hogenkamp JEM; Putten E van; Uiterwijk W; Kemkers E; Wiese H; Duyzer JH; Otjes R; Wyers GP; LLO; TNO; ECN

    1996-01-01

    In 1990 werd het 'Project Speuld' gestart dat tot doel had een depositie-monitoring opstelling voor verzurende komponenten boven het Speulderbos te implementeren ten behoeve van het continu bepalen van de depositie op het bos en daarmee het beleid onafhankelijk te kunnen evalueren. Het