Anterior Cantilever Resin-Bonded Fixed Dental Prostheses: A Review of the Literature.

Science.gov (United States)

Mourshed, Bilal; Samran, Abdulaziz; Alfagih, Amal; Samran, Ahalm; Abdulrab, Saleem; Kern, Matthias

2018-03-01

This review evaluated the survival rate of single retainer anterior resin-bonded fixed dental prostheses (RBFDPs) to determine whether the choice of material affects their clinical outcome. An electronic search of the English peer-reviewed dental literature in PubMed was conducted to identify all publications reporting on cantilever RBFDPs until May 2016. Study information extraction and methodological quality assessments were accomplished by two reviewers independently. The searched keywords were as follows: "resin-bonded, single retainer, all-ceramic resin-bonded fixed dental prostheses (RBFDPs), all-ceramic RBFDPs, cantilever resin, RBFDPs, cantilever resin-bonded bridge, two units cantilevered, two-unit cantilevered, metal-ceramic cantilever, and metal-ceramic." Furthermore, the ''Related Articles'' feature of PubMed was used to identify further references of interest within the primary search. The bibliographies of the obtained references were used to identify pertinent secondary references. Review articles were also used to identify relevant articles. After the application of exclusion criteria, the definitive list of articles was screened to extract the qualitative data, and the results were analyzed. Overall 2588 articles were dedicated at the first review phase; however, only 311 studies were left after the elimination of duplicates and unrelated studies. Seventeen studies passed the second review phase. Five studies were excluded because they were follow-up studies of the same study cohort. Twelve studies were finally selected. The use of cantilever RBFDPs showed promising results and high survival rates. © 2016 by the American College of Prosthodontists.

Fracture analysis of randomized implant-supported fixed dental prostheses

Science.gov (United States)

Esquivel-Upshaw, Josephine F.; Mehler, Alex; Clark, Arthur E.; Neal, Dan; Anusavice, Kenneth J.

2014-01-01

Objective Fractures of posterior fixed dental all-ceramic prostheses can be caused by one or more factors including prosthesis design, flaw distribution, direction and magnitude of occlusal loading, and nature of supporting infrastructure (tooth root/implant), and presence of adjacent teeth. This clinical study of implant-supported, all-ceramic fixed dental prostheses, determined the effects of (1) presence of a tooth distal to the most distal retainer; (2) prosthesis loading either along the non-load bearing or load bearing areas; (3) presence of excursive contacts or maximum intercuspation contacts in the prosthesis; and (4) magnitude of bite force on the occurrence of veneer ceramic fracture. Methods 89 implant-supported FDPs were randomized as either a three-unit posterior metal-ceramic (Au-Pd-Ag alloy and InLine POM, Ivoclar, Vivadent) FDP or a ceramic-ceramic (ZirCAD and ZirPress, Ivoclar, Vivadent) FDP. Two implants (Osseospeed, Dentsply) and custom abutments (Atlantis, Dentsply) supported these FDPs, which were cemented with resin cement (RelyX Universal Cement). Baseline photographs were made with markings of teeth from maximum intercuspation (MI) and excursive function. Patients were recalled at 6 months and 1 to 3 years. Fractures were observed, their locations recorded, and images compared with baseline photographs of occlusal contacts. Conclusion No significant relationship exists between the occurrence of fracture and: (1) the magnitude of bite force; (2) a tooth distal to the most distal retainer; and (3) contacts in load-bearing or non-load-bearing areas. However, there was a significantly higher likelihood of fracture in areas with MI contacts only. Clinical Significance This clinical study demonstrates that there is a need to evaluate occlusion differently with implant-supported prostheses than with natural tooth supported prostheses because of the absence of a periodontal ligament. Implant supported prostheses should have minimal occlusion and

Four-unit fixed dental prostheses replacing the maxillary incisors supported by two narrow-diameter implants - a five-year case series.

Science.gov (United States)

Moráguez, Osvaldo; Vailati, Francesca; Grütter, Linda; Sailer, Irena; Belser, Urs C

2017-07-01

(1) To determine the survival rate of 10 four-unit fixed dental prostheses (FDPs) replacing the four maxillary incisors, supported by 20 narrow-diameter implants (NDIs), (2) to assess the incidence of mechanical and biological complications, and (3) to evaluate bone level changes longitudinally after final FDP insertion. Ten patients (six women, four men), mean age 49.4 ± 12.6 years, were treated with a four-unit anterior maxillary FDP (six screw-retained; four cemented). Biological parameters, eventual technical complications, radiographic measurements, and study casts were assessed at 1 (baseline), 3, and 5 years after implant placement. A multilevel logistic regression test was performed on clinical parameters and bone level changes (significance level P four-unit FDP to replace the four missing maxillary incisors may be considered a predictable treatment modality. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

The fit of cobalt-chromium three-unit fixed dental prostheses fabricated with four different techniques: a comparative in vitro study.

Science.gov (United States)

Örtorp, Anders; Jönsson, David; Mouhsen, Alaa; Vult von Steyern, Per

2011-04-01

This study sought to evaluate and compare the marginal and internal fit in vitro of three-unit FDPs in Co-Cr made using four fabrication techniques, and to conclude in which area the largest misfit is present. An epoxy resin master model was produced. The impression was first made with silicone, and master and working models were then produced. A total of 32 three-unit Co-Cr FDPs were fabricated with four different production techniques: conventional lost-wax method (LW), milled wax with lost-wax method (MW), milled Co-Cr (MC), and direct laser metal sintering (DLMS). Each of the four groups consisted of eight FDPs (test groups). The FDPs were cemented on their cast and standardised-sectioned. The cement film thickness of the marginal and internal gaps was measured in a stereomicroscope, digital photos were taken at 12× magnification and then analyzed using measurement software. Statistical analyses were performed with one-way ANOVA and Tukey's test. Best fit based on the means (SDs) in μm for all measurement points was in the DLMS group 84 (60) followed by MW 117 (89), LW 133 (89) and MC 166 (135). Significant differences were present between MC and DLMS (p<0.05). The regression analyses presented differences within the parameters: production technique, tooth size, position and measurement point (p < 0.05). Best fit was found in the DLMS group followed by MW, LW and MC. In all four groups, best fit in both abutments was along the axial walls and in the deepest part of the chamfer preparation. The greatest misfit was present occlusally in all specimens. Copyright © 2010 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Three-unit posterior zirconia-ceramic fixed dental prostheses (FDPs) veneered with layered and milled (CAD-on) veneering ceramics: 1-year follow-up of a randomized controlled clinical trial.

Science.gov (United States)

Grohmann, Philipp; Bindl, Andreas; Hämmerle, Christoph; Mehl, Albert; Sailer, Irena

2015-01-01

The aim of this multicenter randomized controlled clinical trial was to test posterior zirconia-ceramic fixed dental prostheses (FDPs) veneered with a computer-aided design/computer- assisted manufacture (CAD/CAM) lithium disilicate veneering ceramic (CAD-on) and manually layered zirconia veneering ceramic with respect to survival of the FDPs, and technical and biologic outcomes. Sixty patients in need of one posterior three-unit FDP were included. The zirconia frameworks were produced with a CAD/CAM system (Cerec inLab 3D/Cerec inEOS inLab). Thirty FDPs were veneered with a CAD/CAM lithium disilicate veneering ceramic (Cad-on) (test) and 30 were veneered with a layered zirconia veneering ceramic (control). For the clinical evaluation at baseline, 6, and 12 months, the United States Public Health Service (USPHS) criteria were used. The biologic outcome was judged by comparing the plaque control record (PCR), bleeding on probing (BOP), and probing pocket depth (PPD). Data were statistically analyzed. Fifty-six patients were examined at a mean follow-up of 13.9 months. At the 1-year follow-up the survival rate was 100% in the test and in the control group. No significant differences of the technical outcomes occurred. Major chipping occurred in the control group (n = 3) and predominantly minor chipping in the test group (minor n = 2, major n = 1). No biologic problems or differences were found. Both types of zirconia-ceramic FDPs exhibited very good clinical outcomes without differences between groups. Chipping occurred in both types of FDPs at small amounts, yet the extension of the chippings differed. The test FDPs predominantly exhibited minor chipping, the control FDPs major chipping.

Clinical prospective evaluation of zirconia-based three-unit posterior fixed dental prostheses: Up-to ten-year results.

Science.gov (United States)

Ioannidis, Alexis; Bindl, Andreas

2016-04-01

Only a few studies exist, which assess the clinical long-term behavior of all-ceramic FDPs in the posterior region. The aim of the present prospective clinical study was to evaluate the clinical performance of posterior three-unit FDPs manufactured from Y-TZP after a service period up to 10 years. 55 patients received 59 three-unit FDPs in the posterior region of the maxilla or mandible. Abutment teeth were prepared and full-arch impressions were taken. Definitive casts were fabricated and optically scanned. Frameworks were fabricated with computer-aided design (CAD) and manufacturing (CAM) technology. Y-TZP frameworks were veneered and adhesively luted to the abutment teeth. Baseline and follow-up examinations (service time: ≥ 48 months) were recorded by applying modified United States Public Health Services (USPHS) rating criteria. Cumulative survival rate was analyzed with Kaplan-Meier. Percentage of biological and technical complication was calculated. Fifty-three patients with 57 FDPs attended the last follow-up visit and a mean observation period of the remaining was 6.3 ± 1.9 years was calculated. Biological complications occurred in 17.5%, technical complications in 28% of the FDPs. The 10-year cumulative survival rate amounted 85.0%. Three FDPs failed to survive, two due to a root fracture of the abutment tooth and one due to secondary caries. Three-unit FDPs made from Y-TZP, veneered with ceramic offer a treatment option with a high rate of chipping. However, the manufacturing processes nowadays are modified in order to avoid this complication. The results of the present investigation suggest that three-unit Y-TZP posterior FDPs may are a possible treatment option. However, a high rate of chipping can be expected. Copyright © 2016. Published by Elsevier Ltd.

Use of digital impression systems with intraoral scanners for fabricating restorations and fixed dental prostheses.

Science.gov (United States)

Takeuchi, Yoshimasa; Koizumi, Hiroyasu; Furuchi, Mika; Sato, Yohei; Ohkubo, Chikahiro; Matsumura, Hideo

2018-01-01

Accurate impressions are essential in fabri-cating dental restorations and fixed dental prostheses. During the last decade, digital impression systems have improved substantially. This review discusses the accuracy of digital impression systems for fabrication of dental restorations and fixed dental prostheses. A literature search in PubMed was performed for the period from July 2010 through June 2017. The search keywords were Cerec, digital impression, direct digitalization, indirect digitalization, and intraoral scanner. Only relevant studies are summarized and discussed in this review. In general, the latest systems have considerably reduced the time required for impression making, and the accuracy and marginal fit of digital impression systems have recently improved. Restorations and fixed dental prostheses fabricated with currently available digital impression systems and intraoral scanners exhibit clinically acceptable ranges of marginal gap in both direct and indirect procedures.

Considerations for services from dental technicians in fabrication of fixed prostheses: A survey of commercial dental laboratories in Thessaloniki, Greece.

Science.gov (United States)

Hatzikyriakos, Andreas; Petridis, Haralampos P; Tsiggos, Nikolaos; Sakelariou, Sotirios

2006-11-01

Effective communication and cooperation between dentists and dental technicians are essential in providing quality services. There has been a lack of information regarding dentist-dental technician communications and current methods and materials used for the fabrication of fixed partial dentures (FPDs). This cross-sectional study identified the materials and techniques used for fabrication of FPDs, as well as the status of communication between dentists and dental technicians in Thessaloniki, Greece. A questionnaire was developed with 7 sections pertaining to procedures and materials used for the fabrication of fixed prostheses: general questions, infection control, impressions/interocclusal records, die technique/mounting, information from final casts, prostheses design/materials, and communication/shade selection. The questionnaire was anonymous and distributed by the Association of Dental Technicians of Thessaloniki to all member laboratories (228) in the wider province of Thessaloniki, Greece. Due to the absence of normal distribution of the results, frequencies and medians were reported. Ninety-six of 228 dental laboratories responded (42.1% response rate). Twenty-six percent of dental laboratories did not routinely disinfect incoming items. The dental technicians considered 30% of incoming final impressions and 20% of interocclusal registrations as inadequate. Half of the time (55%) final casts were mounted by technicians on simple hinge articulators. Only 20% of tooth preparations had adequate finish lines. The majority (70%) of fixed restorations were metal-ceramic. Fifty-seven percent of dental technicians considered the delivery time requested by dentists as insufficient. The information provided in this study indicates areas of weakness in communication between dentists and dental technicians, along with areas where both parties should use greater care during clinical and laboratory procedures.

Effect of Different Disinfection Protocols on Microbial and Biofilm Contamination of Dental Unit Waterlines in Community Dental Practices

Directory of Open Access Journals (Sweden)

Laura Dallolio

2014-02-01

Full Text Available Output water from dental unit waterlines (DUWLs may be a potential source of infection for both dental healthcare staff and patients. This study compared the efficacy of different disinfection methods with regard to the water quality and the presence of biofilm in DUWLs. Five dental units operating in a public dental health care setting were selected. The control dental unit had no disinfection system; two were disinfected intermittently with peracetic acid/hydrogen peroxide 0.26% and two underwent continuous disinfection with hydrogen peroxide/silver ions (0.02% and stabilized chlorine dioxide (0.22%, respectively. After three months of applying the disinfection protocols, continuous disinfection systems were more effective than intermittent systems in reducing the microbial contamination of the water, allowing compliance with the CDC guidelines and the European Council regulatory thresholds for drinking water. P. aeruginosa, Legionella spp, sulphite-reducing Clostridium spores, S. aureus and β-haemolytic streptococci were also absent from units treated with continuous disinfection. The biofilm covering the DUWLs was more extensive, thicker and more friable in the intermittent disinfection dental units than in those with continuous disinfection. Overall, the findings showed that the products used for continuous disinfection of dental unit waterlines showed statistically better results than the intermittent treatment products under the study conditions.

Effect of different disinfection protocols on microbial and biofilm contamination of dental unit waterlines in community dental practices.

Science.gov (United States)

Dallolio, Laura; Scuderi, Amalia; Rini, Maria S; Valente, Sabrina; Farruggia, Patrizia; Sabattini, Maria A Bucci; Pasquinelli, Gianandrea; Acacci, Anna; Roncarati, Greta; Leoni, Erica

2014-02-18

Output water from dental unit waterlines (DUWLs) may be a potential source of infection for both dental healthcare staff and patients. This study compared the efficacy of different disinfection methods with regard to the water quality and the presence of biofilm in DUWLs. Five dental units operating in a public dental health care setting were selected. The control dental unit had no disinfection system; two were disinfected intermittently with peracetic acid/hydrogen peroxide 0.26% and two underwent continuous disinfection with hydrogen peroxide/silver ions (0.02%) and stabilized chlorine dioxide (0.22%), respectively. After three months of applying the disinfection protocols, continuous disinfection systems were more effective than intermittent systems in reducing the microbial contamination of the water, allowing compliance with the CDC guidelines and the European Council regulatory thresholds for drinking water. P. aeruginosa, Legionella spp, sulphite-reducing Clostridium spores, S. aureus and β-haemolytic streptococci were also absent from units treated with continuous disinfection. The biofilm covering the DUWLs was more extensive, thicker and more friable in the intermittent disinfection dental units than in those with continuous disinfection. Overall, the findings showed that the products used for continuous disinfection of dental unit waterlines showed statistically better results than the intermittent treatment products under the study conditions.

Economic evaluation of single-tooth replacement: dental implant versus fixed partial denture.

Science.gov (United States)

Kim, Younhee; Park, Joo-Yeon; Park, Sun-Young; Oh, Sung-Hee; Jung, YeaJi; Kim, Ji-Min; Yoo, Soo-Yeon; Kim, Seong-Kyun

2014-01-01

This study assessed the cost-effectiveness from a societal perspective of a dental implant compared with a three-unit tooth-supported fixed partial denture (FPD) for the replacement of a single tooth in 2010. A decision tree was developed to estimate cost-effectiveness over a 10-year period. The survival rates of single-tooth implants and FPDs were extracted from a meta-analysis of single-arm studies. Medical costs included initial treatment costs, maintenance costs, and costs to treat complications. Patient surveys were used to obtain the costs of the initial single-tooth implant or FPD. Maintenance costs and costs to treat complications were based on surveys of seven clinical experts at dental clinics or hospitals. Transportation costs were calculated based on the number of visits for implant or FPD treatment. Patient time costs were estimated using the number of visits and time required, hourly wage, and employment rate. Future costs were discounted by 5% to convert to present values. The results of a 10-year period model showed that a single dental implant cost US $261 (clinic) to $342 (hospital) more than an FPD and had an average survival rate that was 10.4% higher. The incremental cost-effectiveness ratio was $2,514 in a clinic and $3,290 in a hospital for a prosthesis in situ for 10 years. The sensitivity analysis showed that initial treatment costs and survival rate influenced the cost-effectiveness. If the cost of an implant were reduced to 80% of the current cost, the implant would become the dominant intervention. Although the level of evidence for effectiveness is low, and some aspects of single-tooth implants or FPDs, such as satisfaction, were not considered, this study will help patients requiring single-tooth replacement to choose the best treatment option.

Tooth replacements in young adults with severe hypodontia: Orthodontic space closure, dental implants, and tooth-supported fixed dental prostheses. A follow-up study.

Science.gov (United States)

Hvaring, Christina L; Øgaard, Bjørn; Birkeland, Kari

2016-10-01

Children with severe hypodontia have a substantial impairment of their dental health starting early in life. The purpose of this study was to describe types and locations of substitutes for missing teeth in patients with severe hypodontia and to compare the crown and soft tissue morphologies of orthodontic space closure, dental implants, and tooth-supported fixed dental prostheses for replacing teeth in the anterior region. Fifty patients missing 6 or more teeth and aged 18 years or older (mean age, 25.6 years) took part in a follow-up study. The patients were examined clinically with panoramic radiographs and clinical photographs. Crown and soft tissue variables (mucosal discoloration, crown morphology, color, and papilla index) were compared for orthodontic space closure, dental implant fixtures, and fixed dental prostheses. Dental implants, orthodontic space closure, and retaining deciduous teeth were the most commonly prescribed treatments. Persisting deciduous teeth showed a good survival rate at the follow-up examination. Mucosal discoloration was seen only for implant fixtures and was evident for almost all fixtures in the anterior mandible and two thirds of those in the anterior maxilla. The papilla index scored poorer for both implant fixtures and fixed dental prostheses compared with orthodontic space closure. Dental implants in the anterior region proved to be an inadequate treatment modality in patients with severe hypodontia because of pronounced mucosal discoloration. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Image quality assessment and medical physics evaluation of different portable dental X-ray units.

Science.gov (United States)

Pittayapat, Pisha; Oliveira-Santos, Christiano; Thevissen, Patrick; Michielsen, Koen; Bergans, Niki; Willems, Guy; Debruyckere, Deborah; Jacobs, Reinhilde

2010-09-10

Recently developed portable dental X-ray units increase the mobility of the forensic odontologists and allow more efficient X-ray work in a disaster field, especially when used in combination with digital sensors. This type of machines might also have potential for application in remote areas, military and humanitarian missions, dental care of patients with mobility limitation, as well as imaging in operating rooms. To evaluate radiographic image quality acquired by three portable X-ray devices in combination with four image receptors and to evaluate their medical physics parameters. Images of five samples consisting of four teeth and one formalin-fixed mandible were acquired by one conventional wall-mounted X-ray unit, MinRay 60/70 kVp, used as a clinical standard, and three portable dental X-ray devices: AnyRay 60 kVp, Nomad 60 kVp and Rextar 70 kVp, in combination with a phosphor image plate (PSP), a CCD, or a CMOS sensor. Three observers evaluated images for standard image quality besides forensic diagnostic quality on a 4-point rating scale. Furthermore, all machines underwent tests for occupational as well as patient dosimetry. Statistical analysis showed good quality imaging for all system, with the combination of Nomad and PSP yielding the best score. A significant difference in image quality between the combination of the four X-ray devices and four sensors was established (p1m: Rextar <0.2 microGy, MinRay <0.1 microGy). The present study demonstrated the feasibility of three portable X-ray systems to be used for specific indications, based on acceptable image quality and sufficient accuracy of the machines and following the standard guidelines for radiation hygiene. Copyright 2010 Elsevier Ireland Ltd. All rights reserved.

Marginal and Internal Fit of Cobalt-Chromium Fixed Dental Prostheses Generated from Digital and Conventional Impressions

OpenAIRE

Svanborg, Per; Skjerven, Henrik; Carlsson, Pablo; Eliasson, Alf; Karlsson, Stig; Örtorp, Anders

2014-01-01

Objectives. Digital impressions are increasingly used and have the potential to avoid the problem of inaccurate impressions. Only a few studies to verify the accuracy of digital impressions have been performed. The purpose of this study was to compare the marginal and internal fit of 3-unit tooth supported fixed dental prostheses (FDPs) fabricated from digital and conventional impressions. Methods. Ten FDPs were produced from digital impressions using the iTero system and 10 FDPs were produce...

Effect of treatment with fixed and removable dental prostheses. An oral health-related quality of life study

DEFF Research Database (Denmark)

Øzhayat, Esben Boeskov; Gotfredsen, Klaus

2012-01-01

The aim of the study was to evaluate patient-reported effects of treatment with fixed dental prostheses (FDP) and removable dental prostheses (RDP) and relate the change in Oral Health Related Quality of Life (OHRQoL) to the type of treatment and objective dental variables of aesthetics and masti......The aim of the study was to evaluate patient-reported effects of treatment with fixed dental prostheses (FDP) and removable dental prostheses (RDP) and relate the change in Oral Health Related Quality of Life (OHRQoL) to the type of treatment and objective dental variables of aesthetics...... were obtained. The participants completed the Oral Health Impact Profile 49 (OHIP-49) before and after treatment. A control group with no need for dental treatment also completed the OHIP-49. All participants had a significant improvement in OHRQoL. The improvement was higher for the RDP group than...

Clinical acceptability of metal-ceramic fixed partial dental prosthesis fabricated with direct metal laser sintering technique-5 year follow-up.

Science.gov (United States)

Prabhu, Radhakrishnan; Prabhu, Geetha; Baskaran, Eswaran; Arumugam, Eswaran M

2016-01-01

In recent years, direct metal laser sintered (DMLS) metal-ceramic-based fixed partial denture prostheses have been used as an alternative to conventional metal-ceramic fixed partial denture prostheses. However, clinical studies for evaluating their long-term clinical survivability and acceptability are limited. The aim of this study was to assess the efficacy of metal-ceramic fixed dental prosthesis fabricated with DMLS technique, and its clinical acceptance on long-term clinical use. The study group consisted of 45 patients who were restored with posterior three-unit fixed partial denture prosthesis made using direct laser sintered metal-ceramic restorations. Patient recall and clinical examination of the restorations were done after 6months and every 12 months thereafter for the period of 60 months. Clinical examination for evaluation of longevity of restorations was done using modified Ryge criteria which included chipping of the veneered ceramic, connector failure occurring in the fixed partial denture prosthesis, discoloration at the marginal areas of the veneered ceramic, and marginal adaptation of the metal and ceramic of the fixed denture prosthesis. Periapical status was assessed using periodical radiographs during the study period. Survival analysis was made using the Kaplan-Meier method. None of the patients had failure of the connector of the fixed partial denture prostheses during the study period. Two exhibited biological changes which included periapical changes and proximal caries adjacent to the abutments. DMLS metal-ceramic fixed partial denture prosthesis had a survival rate of 95.5% and yielded promising results during the 5-year clinical study.

Evaluation of mycological contamination of dental unit waterlines.

Science.gov (United States)

Szymańska, Jolanta

2005-01-01

The quality of dental unit water is of great importance since patients and dental staff are regularly exposed to water from aerosols generated during work. The main purpose of this investigation was mycological evaluation of dental unit waterlines (DUWL). The author determined the number and species of fungi present in the water from a unit reservoir which is the source of water for a dental unit, in the water flowing from a high-speed handpiece of a unit, and in the swab sample collected from the wall of a waterline connecting a unit reservoir and dental handpieces. The following mould fungi were identified: Aspergillus amstelodami, Aspergillus fumigatus, Aspergillus spp. from Aspergillus glaucus group, Aspergillus repens, Citromyces spp., Geotrichum candidum, Penicillium aspergilliforme, Penicillium pusillum, Penicillium turolense, Sclerotium sclerotiorum; yeast-like fungi: Candida albicans, Candida curvata and other yeasts. Some of them, in certain circumstances, especially in people with immunological disorders, may be a cause of opportunistic infections. Thus, it is necessary that the DUWL should be submitted to a decontamination protocol and to routine microbial monitoring to guarantee an appropriate quality of water used in dental treatment.

A direct bonded fixed partial dental prosthesis: A clinical report

OpenAIRE

Tanoue, Naomi; Tanaka, Takuo

2015-01-01

A direct bonded fixed partial dental prosthesis, with a composite resin denture tooth as a pontic, a tri-n-butylborane initiated adhesive resin, and screw posts for reinforcement, was still functioning after an observation period of 20 years. The prosthesis was found to be reliable for long-term clinical use when chemically and mechanically reinforced.

The zygomatic implant perforated (ZIP) flap: a new technique for combined surgical reconstruction and rapid fixed dental rehabilitation following low-level maxillectomy.

Science.gov (United States)

Butterworth, C J; Rogers, S N

2017-12-01

This aim of this report is to describe the development and evolution of a new surgical technique for the immediate surgical reconstruction and rapid post-operative prosthodontic rehabilitation with a fixed dental prosthesis following low-level maxillectomy for malignant disease.The technique involves the use of a zygomatic oncology implant perforated micro-vascular soft tissue flap (ZIP flap) for the primary management of maxillary malignancy with surgical closure of the resultant maxillary defect and the installation of osseointegrated support for a zygomatic implant-supported maxillary fixed dental prosthesis.The use of this technique facilitates extremely rapid oral and dental rehabilitation within a few weeks of resective surgery, providing rapid return to function and restoring appearance following low-level maxillary resection, even in cases where radiotherapy is required as an adjuvant treatment post-operatively. The ZIP flap technique has been adopted as a standard procedure in the unit for the management of low-level maxillary malignancy, and this report provides a detailed step-by-step approach to treatment and discusses modifications developed over the treatment of an initial cohort of patients.

Effect of number of pontics and impression technique on the accuracy of four-unit monolithic zirconia fixed dental prostheses.

Science.gov (United States)

Kim, Woong Ki; Kim, Sunjai

2018-03-08

Because of their relatively small scanning area, intraoral scanners may result in less accurate fixed dental prostheses (FDPs) than do laboratory scanners. The purpose of this in vitro study was to evaluate the accuracy of monolithic zirconia FDPs with different numbers of pontics fabricated with different impression techniques. The mandibular right premolars and molars of an acrylic resin model were prepared to receive 4-unit FDPs. Three master models were fabricated with epoxy resin: model NP, no pontic; model 1P, 1 pontic; and model 2P, 2 pontics. Each master model was scanned by using direct (DD) and indirect digitalization (ID). Four-unit monolithic zirconia FDPs were fabricated and divided into 3 groups (groups NP, 1P, and 2P) and then subdivided according to the digitalization technique (group DD and ID; n=10). The FDPs were also evaluated based on the presence (Po) or absence (NPo) of an adjacent pontic. The marginal, axial, and occlusal gap widths of each FDP were measured, and statistical analyses were performed to evaluate and compare the amount of gap present (α=.05). For direct digitalization, group 2P had significantly greater marginal (69.4 μm versus 60.9 μm or 62.3 μm; Pdigitalization. Direct digitalization resulted in significantly smaller gap widths in all measurement areas than indirect digitalization; however, the mean differences were less than 12 μm, which is considered clinically insignificant. The presence of an adjacent pontic had a significant effect on the adjacent marginal and axial gap widths. Copyright © 2017 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Reconstruction of pseudo three-dimensional dental image from dental panoramic radiograph and tooth surface shape

International Nuclear Information System (INIS)

Imura, Masataka; Kuroda, Yoshihiro; Oshiro, Osamu; Kuroda, Tomohiro; Kagiyama, Yoshiyuki; Yagi, Masakazu; Takada, Kenji; Azuma, Hiroko

2010-01-01

Three-dimensional volume data set is useful for diagnosis in dental treatments. However, to obtain three-dimensional images of a dental arch in general dental clinics is difficult. In this paper, we propose a method to reconstruct pseudo three-dimensional dental images from a dental panoramic radiograph and a tooth surface shape which can be obtained from three dimensional shape measurement of a dental impression. The proposed method finds an appropriate curved surface on which the dental panoramic radiograph is mapped by comparing a virtual panoramic image made from a tooth surface shape to a real panoramic radiograph. The developed pseudo three-dimensional dental images give clear impression of patient's dental condition. (author)

Similar Marginal Precision of Zirconia- and Metal-Ceramic Fixed Dental Prostheses

DEFF Research Database (Denmark)

Nicolaisen, Maj Høygaard; Bahrami, Golnosh; Schropp, Lars

clinical trial, 34 patients were randomized into two groups to receive a 3-unit fixed dental prosthesis (FDP) replacing a second premolar or a first molar. 17 ZC FDPs (BeCe CAD Zirkon, BEGO with Vita VM9, VITA ) and 17 MC FDPs (Bio PontoStar, BEGO with Vita VM13, VITA). All FDPs were made in accordance...... with the manufacturer’s guidelines by one operator. Before and after veneering, the FDPs were placed on the abutment teeth with a light-body A-silicone impression material (Extrude Wash, Kerr) between the restoration and the abutment teeth. After setting, the FDPs were removed and the light-body material was stabilized...... with a heavy-body impression material (Extrude, Kerr). The impression specimens were segmented to allow measurements of the thickness of the light-body material corresponding to the marginal gap at 12 points for each abutment. The measurements were done under 32X magnification with SPOT Advanced. Statistical...

Investigation of clinical conditions affecting quality control in a dental X-ray unit

International Nuclear Information System (INIS)

Akiyama, Hironori; Koseki, Takakazu; Itagaki, Keisuke; Yotsui, Yoritaka; Gamoh, Shoko; Shimizutani, Kimishige

2011-01-01

In this study, to clarify quality control issues in a dental X-ray unit, we surveyed the uniformity and safety of absorbed doses and exposure time from dental X-ray units, and evaluated image quality of intraoral radiography at Osaka Dental University Hospital. Measurements of dose and exposure time were carried out five times and the mean was calculated at twenty-two dental X-ray units in our university hospital using the standard parameters for the mandibular molar region in adults. Intraoral radiography for evaluation of image quality was taken using D-speed films under the standard parameters for the mandibular molar region in adults and E-speed films for pediatric patients. Evaluation of image quality was performed by three oral radiologists. Dose and exposure time differed significantly among units. Image quality of intraoral radiography using D-speed films was not significantly better than that of E-speed films. This study demonstrated that it is necessary to establish a uniform dose and exposure time and to change D-speed films to E-speed films when obtaining intraoral radiography in our hospital. (author)

Clinical study on the success of posterior monolithic zirconia crowns and fixed dental prostheses: preliminary report

Directory of Open Access Journals (Sweden)

Merve Bankoğlu Güngör

2017-09-01

Full Text Available Objective: The purpose of this report was to present preliminary clinical results regarding the success rates and technical outcomes of posterior monolithic zirconia single tooth crowns (STs and fixed dental prostheses (FDPs. Materials and Method: Thirty-four patients received 43 posterior monolithic zirconia restorations as single tooth crowns (STs and/or fixed dental prostheses (FDPs, which were fabricated using a CAD-CAM (Computer Aided Design - Computer Aided Manufacturing system. At baseline and every 6 months, the restorations were examined for survival and technical outcomes. Success of the restorations was defined as the restoration remaining in situ, with no need for removal or replacement at follow-up visits. Technical outcomes were evaluated with a modified version of the United States Public Health Services criteria. Survival of restorations was estimated by using the Kaplan-Meier survival analysis. For each restoration, duration of follow-up was calculated from the time of placement to the date of its first failure. Results: After a mean observation period of 18.6 ± 3.9 months (between 8-24 months, cumulative survival rates were 86.7% and 92.3% for STs and FDPs, respectively. Technical evaluation revealed good marginal adaptation and crown contours; however, modifications were needed for shade and occlusion of restorations. Conclusion: These preliminary results revealed high survival rate and generally successful technical outcomes for posterior monolithic zirconia STs and FDPs.

Students' perceptions of materials and techniques used at European dental schools in the education of fixed prosthodontics

NARCIS (Netherlands)

Brand, H.S.; Kamell, H.; Kharbanda, A.; Dozic, A.

2013-01-01

The aim of this study was to explore the materials and procedures used by students in dental schools across Europe for teaching fixed prosthodontics. An online questionnaire, containing twenty-eight dichotomous, multiple-choice, and Likert scale rating questions, was sent to students in forty dental

Biocompatibility effects of indirect exposure of base-metal dental casting alloys to a human-derived three-dimensional oral mucosal model.

Science.gov (United States)

McGinley, Emma Louise; Moran, Gary P; Fleming, Garry J P

2013-11-01

The study employed a three-dimensional (3D) human-derived oral mucosal model to assess the biocompatibility of base-metal dental casting alloys ubiquitous in fixed prosthodontic and orthodontic dentistry. Oral mucosal models were generated using primary human oral keratinocyte and gingival fibroblast cells seeded onto human de-epidermidised dermal scaffolds. Nickel-chromium (Ni-Cr) and cobalt-chromium (Co-Cr) base-metal alloy immersion solutions were exposed to oral mucosal models for increasing time periods (2-72h). Analysis methodologies (histology, viable cell counts, oxidative stress, cytokine expression and toxicity) were performed following exposure. Ni-based alloy immersion solutions elicited significantly decreased cell viability (P0.4755) or cellular toxicity (Pcasting alloys through discriminatory experimental parameters. Increasing incidences of Ni hypersensitivity in the general population warrants serious consideration from dental practitioners and patients alike where fixed prosthodontic/orthodontic dental treatments are the treatment modality involved. The novel and analytical oral mucosal model has the potential to significantly contribute to the advancement of reproducible dental medical device and dental material appraisals. Copyright © 2013 Elsevier Ltd. All rights reserved.

Effect of nanoemulsion on dental unit waterline biofilm

Directory of Open Access Journals (Sweden)

Karthikeyan Ramalingam

2013-09-01

Full Text Available Bacterial biofilm in dental unit waterlines (DUWLs is a widespread problem and poses a potentially significant risk of infection to dental staff and patients. The present study investigates the level and composition of bacterial contamination of dental chair syringe waterlines and investigates the efficacy of a cetylpyridinium chloride-containing nanoemulsion disinfectant in reducing bacterial loads. Waterline biofilms exposed to nanoemulsion for 1 hour, 6 hours, 12 hours, 24 hours, 48 hours, and 72 hours showed high reduction of colonies, and very low counts after 12 hours and 24 hours (67 colony-forming units/mL were observed. Exposures for 48 hours and 72 hours showed no or few visible colonies (2 colony-forming units/mL. The nanoemulsion employed improves efficacy against microorganisms more than unemulsified components. DNA sequencing showed that the organisms in the waterline biofilm are primarily of soil or water origin. The findings indicate that nanoemulsion effectively disinfects waterlines to consistently meet the American Dental Association (ADA recommendation.

Influence of retainer design on two-unit cantilever resin-bonded glass fiber reinforced composite fixed dental prostheses: an in vitro and finite element analysis study.

Science.gov (United States)

Keulemans, Filip; De Jager, Niek; Kleverlaan, Cornelis J; Feilzer, Albert J

2008-10-01

The aim of this study was to evaluate in vitro the influence of retainer design on the strength of two-unit cantilever resin-bonded glass fiber-reinforced composite (FRC) fixed dental prostheses (FDP). Four retainer designs were tested: a proximal box, a step-box, a dual wing, and a step-box-wing. Of each design on 8 human mandibular molars, FRC-FDPs of a premolar size were produced. The FRC framework was made of resin impregnated unidirectional glass fibers (Estenia C&B EG Fiber, Kuraray) and veneered with hybrid resin composite (Estenia C&B, Kuraray). Panavia F 2.0 (Kuraray) was used as resin luting cement. FRC-FDPs were loaded to failure in a universal testing machine. One-way ANOVA and Tukey's post-hoc test were used to evaluate the data. The four designs were analyzed with finite element analysis (FEA) to reveal the stress distribution within the tooth/restoration complex. Significantly lower fracture strengths were observed with inlay-retained FDPs (proximal box: 300 +/- 65 N; step-box: 309 +/- 37 N) compared to wing-retained FDPs (p optimal design for replacement of a single premolar by means of a two-unit cantilever FRC-FDPs.

All-ceramic inlay-retained fixed dental prostheses for replacing posterior missing teeth: A systematic review.

Science.gov (United States)

Castillo-Oyagüe, Raquel; Sancho-Esper, Rocío; Lynch, Christopher D; Suárez-García, María-Jesús

2018-01-01

To evaluate the current status of all-ceramic inlay-retained fixed dental prostheses (CIR-FDPs) for the replacement of posterior teeth. Screening of titles and abstracts, full-text analysis for inclusion eligibility, quality assessment, data extraction and evaluation of the scientific evidence were performed independently by two reviewers. The electronic databases MEDLINE/PubMed, EMBASE, Cochrane Central Register of Controlled Trials, and Compludoc were searched with no restriction to publication date or language. The quality of the studies was evaluated through: the original 'QDP' ('Questionnaire for selecting articles on Dental Prostheses') (for research papers); the 'Guidelines for managing overviews' of the Evidence-Based Medicine Working Group (for reviews); the Cochrane risk of bias tool; and the GRADE scale for grading scientific evidence. This review started with 4942 articles, which were narrowed down to 23 according to the selection criteria. The data was not statistically treated because of the heterogeneity of the studies. Zirconia-based CIR-FDPs may be recommended for restoring posterior single missing teeth, although the prosthesis/tooth bonded interface has yet to be improved. The addition of lateral wings to the classical inlay preparation seems promising. The weakest parts of CIR-FDPs are the connectors and retainers, while caries and endodontic problems are the most common biological complications. The fabrication of CIR-FDPs with monolithic zirconia may eliminate chipping problems. A three-unit CIR-FDP is a viable treatment option for replacing a posterior missing tooth. Appropriate case selection, abutment preparation and luting procedures may be decisive for clinical success. Copyright © 2017 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

Treatment of radiation dental caries with fixed dental prosthetic constructions

Energy Technology Data Exchange (ETDEWEB)

Dachev, B [Vissh Meditsinski Inst., Sofia (Bulgaria)

1974-01-01

On the basis of clinical observations for many years the author established that the covering of the teeth, progressively developing radiation caries, with crowns of precious metal and plastics is a safe way for their protection. The crown isolates the teeth from the saliva with its changed composition, quantity and changed pH. A prophylactic effect is obtained with the covering of the morbid teeth with radiation caries, concerning the possibilities of osteoradionecrosis development, due to the restriction of the ways of secondary infection penetration. The carried out treatment with fixed crowns preserves the anatomical teeth shape, radiation caries stops its development and the masticatory function of the dentition is recovered. After radiation treatment in the maxillofacial region with hard dental tissues affection which cannot be restored by way of ordinary definite fillings--indications for crown covering exist. The carried out observations reveal that complex cares are necessary in the radiation caries treatment on the part of specialists in therapeutic and orthopedic stomatology with consultations with radiologists. (auth)

Stress analysis of different prosthesis materials in implant-supported fixed dental prosthesis using 3D finite element method

Directory of Open Access Journals (Sweden)

Pedram Iranmanesh

2014-01-01

Full Text Available Introduction: In the present study, the finite element method (FEM was used to investigate the effects of prosthesis material types on stress distribution of the bone surrounding implants and to evaluate stress distribution in three-unit implant-supported fixed dental prosthesis (FDP. Materials and Methods: A three-dimensional (3D finite element FDP model of the maxillary second premolar to the second molar was designed. Three load conditions were statically applied on the functional cusps in horizontal (57.0 N, vertical (200.0 N, and oblique (400.0 N, θ = 120° directions. Four standard framework materials were evaluated: Polymethyl methacrylate (PMMA, base-metal, porcelain fused to metal, andporcelain. Results: The maximum of von Mises stress in the oblique direction was higher than the vertical and horizontal directions in all conditions. In the bone-crestal section, the maximum von Mises stress (53.78 MPa was observed in PMMA within oblique load. In FDPs, the maximum stress was generated at the connector region in all conditions. Conclusion: A noticeable difference was not observed in the bone stress distribution pattern with different prosthetic materials. Although, higher stress value could be seen in polymethyl methacrylate, all types of prosthesis yielded the same stress distribution pattern in FDP. More clinical studies are needed to evaluate the survival rate of these materials.

Control area around dental x-ray units - dosimetric study I

International Nuclear Information System (INIS)

Suric Mihic, M.; Prlic, I.; Milkovic-Kraus, S.; Mestrovic, T.; Rojnica, F.

2005-01-01

The issue of prompt professional occupational dose reporting is raised when the interval between doses is short or when the radiation source suffers a technical failure. Every involved person should be able to recognised individual or group radiation exposure. Actual radiation quality of the source is to be taken into account. To optimise radiation protection of dental radiologists, dental x-ray units were subject to Quality Control measurements. Scattering radiation from the patient's dental structures was measured in order to prove the results published by S. Tabakov, but using the modern RVG dental mode and several classical diagnostic positions. We used a special head phantom (real scull + Perspex + crown glass) and common dental x-ray units of various brands and types. The radiation quality was measured using standard QA/QC equipment. We measured the radiation scattered from the phantom in the horizontal plane (at thyroid height) at 0.5 m distance from the centre of the phantom. The measurement were done for a number of standard dental x-ray procedures, but this paper presents only the scattering caused by the upper premolars. The attenuation in the facial tissue was minimal and the majority of incidental radiation passes through the open mouth of a patient directly into the room area causing occupational exposure. The results we obtained are consistent with earlier reports on patient dosimetry. Occupational exposure is much lower if a modern RVG technique is used and no radiation protection threshold is exceeded in relation to Croatian laws. Much more important is the fact that the need for protective equipment and shielding is smaller if QA warrants proper technical operation of the x-ray tube. The maintenance of dental units is essential and so is a proper training of staff using modern diagnostic techniques. The control area around the x-ray unit is to be calculated and established for every standard dental unit (this does not apply for panoramic x

Mobile dental units: leasing or buying? A dollar-cost analysis.

Science.gov (United States)

Arevalo, Oscar; Saman, Daniel M; Bonaime, Alice; Skelton, Judy

2010-01-01

The decision to acquire a mobile dental unit is based on a standard capital budgeting analysis. The next step is to determine whether to obtain the use of the mobile dental unit by borrowing and purchasing or by leasing. As a financing mechanism, leases are simply another way of borrowing money to pay for the asset. To compare lease vs. debt as financial vehicles to acquiring a mobile dental unit. An estimate for a new mobile unit was obtained. Lease and loan proposals from financial lenders were collected. A cost of capital rate was chosen for comparison. Cash flows associated with borrowing and leasing vs. buying were determined fortwo different scenarios: for profit (FP) vs. not-for-profit (NFP), at 5 years. A dollar-cost analysis was utilized to determine the option with the lowest capitalized value. There was a net advantage to buying vs. leasing for both for FP and NFP organizations. Due to tax advantages, owning and leasing were substantially less expensive for FP than for NFP. Slight decreases in the monthly lease payments would make leasing competitive to the buying approach. Exploring alternative financing vehicles may allow dental programs to expand their services through the acquisition of a mobile unit. Though programs generally own assets, it is the use of the asset which is important rather than the ownership. Dental programs can find leasing an attractive alternative by offering access to capital with cash-flow advantages.

Factors affecting dental biofilm in patients wearing fixed orthodontic appliances.

Science.gov (United States)

Mei, Li; Chieng, Joyce; Wong, Connie; Benic, Gareth; Farella, Mauro

2017-12-01

The aim of this study is to investigate the amount and the distribution of biofilm in patients wearing fixed appliances and its relation with age, gender, frequency of tooth brushing, and patient motivation. The sample comprised 52 patients (15.5 ± 3.6 years old, 30 females and 22 males) wearing fixed orthodontic appliances. Dental biofilm was assessed using a modified plaque index (PI). A questionnaire was used to collect patient's information, including gender, age, treatment motivation, and frequency of tooth brushing. Gingival (PI score = 0.9 ± 0.7), mesial (0.8 ± 0.6), and distal (0.8 ± 0.5) areas accumulated more biofilm than occlusal areas (0.3 ± 0.3) (P appliances have the highest biofilm accumulation on the maxillary lateral incisors and maxillary canines, particularly in the gingival area and areas behind arch wires. Less biofilm was observed in female and adult patients and in those who were self-motivated and brushed their teeth more often.

Gingival and dental parameters in the evaluation of aesthetic characteristics of fixed restorations (II

Directory of Open Access Journals (Sweden)

Obradović-Đuričić Kosovka

2005-01-01

Full Text Available This paper is a continuing evaluation of dental and facial parameters in the estimation of aesthetic characteristic of fixed restorations. First of all, attention is paid to the phenomenon describing the tooth tissue's characteristics (transiucency, opalescence, and transparency. The paper also discusses tooth color as a special occurrence, the position of the lower lip line as well as the symmetry of the smile. In addition to these fundamental objective criteria, the paper also deals with subjective criteria (tooth arrangement and position, variation in tooth form, and relative crown length, which play a part in the successful aesthetic integration of fixed restorations.

Three-dimensional esthetic analysis in treatment planning for implant-supported fixed prosthesis in the edentulous maxilla: review of the esthetics literature.

Science.gov (United States)

Bidra, Avinash S

2011-08-01

Fixed implant-supported prosthesis for the edentulous maxilla has gained tremendous popularity over the years. Multiple prosthetic designs have been introduced in order to accommodate a gamut of clinical situations. Irrespective of the design, it is paramount that the esthetics imparted by the prosthesis be uncompromised. Though esthetics is subjective, a common ground exists where all its fundamental principles converge. This article reviews pertinent dental and facial esthetics literature for application of various esthetic concepts involved in diagnosis and treatment planning for an implant-supported fixed prosthesis in the edentulous maxilla. Three-dimensional esthetic analysis involves assessment of various esthetic parameters in superior-inferior, medial-lateral, and anterior-posterior dimensions. The impact of various esthetic parameters such as facial forms, facial profiles, maxillary teeth positions, maxillary teeth proportions, smile lines, lip support, gingival display, facial midline, dental midline, horizontal cant, and smile width are discussed in detail. © 2011 Wiley Periodicals, Inc.

Attachment-retained gingival prosthesis for implant-supported fixed dental prosthesis in the maxilla: a clinical report.

Science.gov (United States)

Aparecida de Mattias Sartori, Ivete; Uhlendorf, Yuri; Padovan, Luiz Eduardo Marques; Junior, Paulo Domingos Ribeiro; Melo, Ana Cláudia Moreira; Tiossi, Rodrigo

2014-12-01

The rehabilitation of edentulous maxillae is a complex procedure due to the involvement of esthetic and functional requirements. A trial maxillary denture can be used to identify the need for adequate upper lip support when replacing removable complete dentures by implant-fixed dental prostheses. This clinical report describes the outcome of the rehabilitation of an edentulous atrophic maxilla with unfavorable maxillomandibular relationship and deficient upper lip support. A trial denture was fabricated and used to diagnose the need for a prosthesis capable of restoring the upper lip support. The reduced upper lip support was also confirmed by a lateral cephalogram. The patient was rehabilitated by an implant-fixed dental prosthesis associated with an attachment-retained gingival prosthesis. The case presented shows that when loss of upper lip support is detected and the patient does not wish to undergo further surgical reconstruction procedure, the retention of a gingival prosthesis using a ball attachment is a satisfactory treatment option. © 2014 by the American College of Prosthodontists.

Betel leaf toothpastes inhibit dental plaque formation on fixed orthodontic patients

Directory of Open Access Journals (Sweden)

Rizka Amelia Mayasari

2011-12-01

Full Text Available Background: Brackets, archwires, ligatures, and other fixed orthodontic appliance components complicate the use of conventional oral-hygiene measures. This often results in significant plaque accumulation around the bracket bases. The addition of betel leaf extract in toothpaste is expected to inhibit the growth of dental plaque. Purpose: The purpose of this study was to evaluate the effect of betel leaf toothpaste in inhibiting plaque formation on the fixed orthodontic patients. Methods: This study was done on dental student of Airlangga University aged 18–24 years, have been wearing fixed orthodontic appliances for 1–2 years, have no systemic diseases. The samples were divided into two groups, consisting of 20 samples. First group of samples brushed their teeth with betel group of samples brushed their teeth with betel brushed their teeth with betel leaf toothpaste and the second using placebo. The subjects were instructed to brush their teeth using Scrub method until reaching zero (0 scor of orthodontic plaque index (OPI. Plaque scores were taken again 4 hours after brushing. The statistical analysis was done by using paired t test. Results: The average of accumulated plaque on group that use betel leaf toothpaste was 25.54 and placebo was 41.09. The result showed that there was significant difference in plaque accumulation between the group with betel leaf toothpaste and placebo 4 hours after brushing (p = 0.001. Conclusion: In conclusion, betel leaf toothpaste is effective in inhibiting the dental plaque formation on the fixed orthodontic patients. Latar belakang: Bracket, kawat busur, kawat ligatur dan komponen peranti ortodonti cekat yang lain mempersulit pembersihan gigi secara konvensional. Hal ini sering menyebabkan terjadinya akumulasi plak di sekitar dasar braket. Penambahan ekstrak daun sirih yang mempunyai efek bakterisid pada pasta gigi diharapkan dapat menghambat pertumbuhan plak. Tujuan: Tujuan penelitian ini adalah untuk

Evaluation of marginal and internal gap of three-unit metal framework according to subtractive manufacturing and additive manufacturing of CAD/CAM systems.

Science.gov (United States)

Kim, Dong-Yeon; Kim, Eo-Bin; Kim, Hae-Young; Kim, Ji-Hwan; Kim, Woong-Chul

2017-12-01

To evaluate the fit of a three-unit metal framework of fixed dental prostheses made by subtractive and additive manufacturing. One master model of metal was fabricated. Twenty silicone impressions were made on the master die, working die of 10 poured with Type 4 stone, and working die of 10 made of scannable stone. Ten three-unit wax frameworks were fabricated by wax-up from Type IV working die. Stereolithography files of 10 three-unit frameworks were obtained using a model scanner and three-dimensional design software on a scannable working die. The three-unit wax framework was fabricated using subtractive manufacturing (SM) by applying the prepared stereolithography file, and the resin framework was fabricated by additive manufacturing (AM); both used metal alloy castings for metal frameworks. Marginal and internal gap were measured using silicone replica technique and digital microscope. Measurement data were analyzed by Kruskal-Wallis H test and Mann-Whitney U-test (α=.05). The lowest and highest gaps between premolar and molar margins were in the SM group and the AM group, respectively. There was a statistically significant difference in the marginal gap among the 3 groups ( P manufacturing are clinically applicable. However, additive manufacturing requires more research to be applied clinically.

The possible usability of three-dimensional cone beam computed dental tomography in dental research

Science.gov (United States)

Yavuz, I.; Rizal, M. F.; Kiswanjaya, B.

2017-08-01

The innovations and advantages of three-dimensional cone beam computed dental tomography (3D CBCT) are continually growing for its potential use in dental research. Imaging techniques are important for planning research in dentistry. Newly improved 3D CBCT imaging systems and accessory computer programs have recently been proven effective for use in dental research. The aim of this study is to introduce 3D CBCT and open a window for future research possibilities that should be given attention in dental research.

A comparison of the marginal vertical discrepancies of zirconium and metal ceramic posterior fixed dental prostheses before and after cementation.

Science.gov (United States)

Gonzalo, Esther; Suárez, Maria J; Serrano, Benjamin; Lozano, Jose F L

2009-12-01

Marginal discrepancies of zirconia posterior fixed dental prostheses (FDPs) fabricated using various systems have been assessed to determine the quality of the restorations and facilitate clinical use; however, studies are limited and results are ambiguous because of the sample sizes and measurement methods. The purpose of this in vitro study was to compare changes in marginal fit of posterior fixed dental prostheses of 3 zirconia systems manufactured using CAD/CAM technology and metal ceramic posterior fixed dental protheses fabricated with the conventional lost-wax technique, before and after cementation. Forty standardized master steel dies with 2 abutments simulating first mandibular premolars were fabricated to receive a posterior 3-unit FDP (from first molar to first premolar) and divided into 4 groups (n=10): Lava All-Ceramic System, Procera Bridge Zirconia, VITA In-Ceram 2000 YZ, and metal ceramic (control group). All FDPs were prepared for an internal space of 50 microm. The external marginal gap of the restorations was investigated by measuring 30 points in the middle of the buccal and lingual surfaces; therefore, 60 measurements per abutment were recorded. Measurements were made with an image analysis program on the master steel model before and after conventional cementation with a glass ionomer agent (Ketac Cem Easymix). The data obtained were statistically analyzed using 1-way ANOVA, Duncan's multiple range post hoc test, and Student's paired t test (alpha=.05). No significant differences in the vertical marginal fit before and after cementation were recorded for the analyzed groups. The marginal discrepancy of Procera abutments before and after cementation (9 +/-10 microm and 12 +/-9 microm, respectively) was less than that of the other groups. Significant differences (P=.001) were observed in marginal adaptation between Procera Bridge Zirconia and the other groups. The results of this study showed that cementation did not cause a significant

Need of implant dentistry at undergraduate dental curriculum in Indian dental colleges

Directory of Open Access Journals (Sweden)

Ramesh Chowdhary

2011-01-01

Full Text Available Edentulism is the major problem in the developing countries, and is widely spread in the current population, although the prevalence is declining and incidence of tooth loss is decreasing in the developed nations. The prevalence of edentulism in India varies from 60% to 69% of 25 years and above age group. It is obvious that the number of lost teeth increases with age leading to an increase in prevalence of partially edentulous patients. From a biological point of view, the replacement of a single missing tooth with an implant rather than a three-unit fixed partial denture, and the implant-supported complete denture has been proved more efficient in improving the mastication and maintaining the bone for a longer time and also more cost-effective treatment. Many dental schools throughout Europe and America have to a various extent introduced implant dentistry as part of the compulsory undergraduate curriculum. Thus, it becomes more essential to introduce implant dentistry at undergraduate level in Indian dental schools to manage the higher percentage of edentulism.

Survival and failure modes: platform-switching for internal and external hexagon cemented fixed dental prostheses.

Science.gov (United States)

Anchieta, Rodolfo B; Machado, Lucas S; Hirata, Ronaldo; Coelho, Paulo G; Bonfante, Estevam A

2016-10-01

This study evaluated the probability of survival (reliability) of platform-switched fixed dental prostheses (FDPs) cemented on different implant-abutment connection designs. Eighty-four-three-unit FDPs (molar pontic) were cemented on abutments connected to two implants of external or internal hexagon connection. Four groups (n = 21 each) were established: external hexagon connection and regular platform (ERC); external hexagon connection and switched platform (ESC); internal hexagon and regular platform (IRC); and internal hexagon and switched platform (ISC). Prostheses were subjected to step-stress accelerated life testing in water. Weibull curves and probability of survival for a mission of 100,000 cycles at 400 N (two-sided 90% CI) were calculated. The beta values of 0.22, 0.48, 0.50, and 1.25 for groups ERC, ESC, IRC, and ISC, respectively, indicated a limited role of fatigue in damage accumulation, except for group ISC. Survival decreased for both platform-switched groups (ESC: 74%, and ISC: 59%) compared with the regular matching platform counterparts (ERC: 95%, and IRC: 98%). Characteristic strength was higher only for ERC compared with ESC, but not different between internal connections. Failures chiefly involved the abutment screw. Platform switching decreased the probability of survival of FDPs on both external and internal connections. The absence in loss of characteristic strength observed in internal hexagon connections favor their use compared with platform-switched external hexagon connections. © 2016 Eur J Oral Sci.

Microbial contamination of dental unit waterlines and effect on quality of indoor air.

Science.gov (United States)

Kadaifciler, Duygu Göksay; Cotuk, Aysin

2014-06-01

The microbiological quality in dental unit waterlines (DUWLs) is considered to be important because patients and dental staff with suppressed immune systems are regularly exposed to water and aerosols generated from dental units (DUs). Opportunistic pathogens like Pseudomonas, Legionella, Candida, and Aspergillus can be present in DUWLs, while during consultations, bioaerosols can be dispersed in the air, thus resulting in effects on microbiological quality of indoor air. This present study represents microbiological air and water quality in dental offices (DOs) and also concerns the relationship between the quality of DO air and dental unit water. This study aimed to assess both the microbial quality of dental unit water and the indoor air in 20 DOs and to survey the effect on the quality of the indoor air with the existing microorganisms in dental unit water. Fourteen out of 20 (70 %) DUWLs were found to be contaminated with a high number of aerobic mesophilic heterotrophic bacteria. In terms of bacterial air contamination levels, in 90 % of DOs, a medium level (contamination was determined, while in terms of microfungal air contamination, in all DOs, a low level (contamination was determined. Potential infection or allergen agents, such as Pseudomonas, Micrococcus, Staphylococcus, Alternaria, Cladosporium, Penicillium, Aspergillus, and Paecilomyces were isolated from water and air samples. This study's determination of contamination sources and evaluation of microbial load in DOs could contribute to the development of quality control methods in the future.

Structural optimization of the fibre-reinforced composite substructure in a three-unit dental bridge.

Science.gov (United States)

Shi, Li; Fok, Alex S L

2009-06-01

Failures of fixed partial dentures (FPDs) made of fibre-reinforced composites (FRC) have been reported in many clinical and in vitro studies. The types of failure include debonding at the composite-tooth interface, delamination of the veneering material from the FRC substructure and fracture of the pontic. The design of the FRC substructure, i.e. the position and orientation of the fibres, will affect the fracture resistance of the FPD. The purpose of this study was to find an optimal arrangement of the FRC substructure, by means of structural optimization, which could minimize the failure-initiating stresses in a three-unit FPD. A structural optimization method mimicking biological adaptive growth was developed for orthotropic materials such as FRC and incorporated into the finite element (FE) program ABAQUS. Using the program, optimization of the fibre positions and directions in a three-unit FPD was carried out, the aim being to align the fibre directions with those of the maximum principal stresses. The optimized design was then modeled and analyzed to verify the improvements in mechanical performance of the FPD. Results obtained from the optimization suggested that the fibres should be placed at the bottom of the pontic, forming a U-shape substructure that extended into the connectors linking the teeth and the pontic. FE analyses of the optimized design indicated stress reduction in both the veneering composite and at the interface between the veneer and the FRC substructure. The optimized design obtained using FE-based structural optimization can potentially improve the fracture resistance of FPDs by reducing some of the failure-initiating stresses. Optimization methods can therefore be a useful tool to provide sound scientific guidelines for the design of FRC substructures in FPDs.

Impact of a risk management plan on Legionella contamination of dental unit water.

Science.gov (United States)

Leoni, Erica; Dallolio, Laura; Stagni, Francesca; Sanna, Tiziana; D'Alessandro, Giovanni; Piana, Gabriela

2015-02-23

The study aimed to assess the prevalence of Legionella spp. in dental unit waterlines of a dental clinic and to verify whether the microbiological parameters used as indicators of water quality were correlated with Legionella contamination. A risk management plan was subsequently implemented in the dental health care setting, in order to verify whether the adopted disinfection protocols were effective in preventing Legionella colonization. The water delivered from syringes and turbines of 63 dental units operating in a dental clinic, was monitored for counts of the heterotrophic bacteria P. aeruginosa and Legionella spp. (22 °C and 37 °C). At baseline, output water from dental units continuously treated with disinfection products was more compliant with the recommended standards than untreated and periodically treated water. However, continuous disinfection was still not able to prevent contamination by Legionella and P. aeruginosa. Legionella was isolated from 36.4%, 24.3% and 53.3% of samples from untreated, periodically and continuously treated waterlines, respectively. The standard microbiological parameters used as indicators of water quality proved to be unreliable as predictors of the presence of Legionella, whose source was identified as the tap water used to supply the dental units. The adoption of control measures, including the use of deionized water in supplying the dental unit waterlines and the application of a combined protocol of continuous and periodic disinfection, with different active products for the different devices, resulted in good control of Legionella contamination. The efficacy of the measures adopted was mainly linked to the strict adherence to the planned protocols, which placed particular stress on staff training and ongoing environmental monitoring.

Dental Students' Knowledge of Resources for LGBT Persons: Findings from Three Dental Schools.

Science.gov (United States)

Feng, Xiaoying; Mugayar, Leda; Perez, Edna; Nagasawa, Pamela R; Brown, David G; Behar-Horenstein, Linda S

2017-01-01

Recently, there has been increased attention to including cultural diversity in the education of health professionals, including concern for lesbian, gay, bisexual, and transgender (LGBT) inclusion and visibility. Studies regarding cultural exposure and acceptance of LGBT populations have been concentrated in medicine, with findings showing that medical providers often graduate having missed the preparation required to care for LGBT persons. A visible, comprehensive, culturally competent environment in dental schools would help ensure that all oral health professionals and students are aware of services available to address the particular needs of LGBT students. The aims of this survey-based study conducted in 2015-16 were to determine dental students' perceptions regarding LGBT students' needs and to assess dental students' knowledge of resources for LGBT persons at three U.S. dental schools, one each in the Midwest, West, and South. Of the 849 students invited to participate, 364 completed the survey (338 dental, 26 dental hygiene), for an overall response rate of 43%. The response rate at individual schools ranged from 30% to 55%. The results showed perceptions of insufficient LGBT information, resources, and support at these institutions, especially at the Western school. There were significant differences among the three schools, with students at the Western school more than the other two schools perceiving that their institution was less aware of whether it met the academic, social support, and spiritual needs of LGBT students. There were no significant differences between LGBT and non-LGBT students' perceptions. The authors urge dental school administrators to explore the degree to which their programs teach respectful and caring behavior towards LGBT students and, by extension, LGBT patient populations.

Effects of Cement, Abutment Surface Pretreatment, and Artificial Aging on the Force Required to Detach Cantilever Fixed Dental Prostheses from Dental Implants.

Science.gov (United States)

Kappel, Stefanie; Chepura, Taras; Schmitter, Marc; Rammelsberg, Peter; Rues, Stefan

To examine the in vitro effects of different cements, abutment surface preconditioning, and artificial aging on the maximum tensile force needed to detach cantilever fixed dental prostheses (FDPs) from dental implants with titanium abutments. A total of 32 tissue-level implants were combined with standardized titanium abutments. For each test group, eight cantilever FDPs were fabricated using selective laser melting (cobalt-chromium [CoCr] alloy). The inner surfaces of the cantilever FDPs and half of the abutments were sandblasted and then joined by use of four different cements (two permanent and two semi-permanent) in two different amounts per cement. Subgroups were tested after either artificial aging (thermocycling and chewing simulation) or 3 days of water storage. Finally, axial pull off-tests were performed for each abutment separately. Cement type and surface pretreatment significantly affected decementation behavior. The highest retention forces (approximately 1,200 N) were associated with sandblasted abutments and permanent cements. With unconditioned abutments, temporary cements (Fu cement (Fu ≈ 100 N), resulted in rather low retention forces. Zinc phosphate cement guaranteed high retention forces. After aging, retention was sufficient only for cementation with zinc phosphate cement and for the combination of sandblasted abutments and glass-ionomer cement. When glass-ionomer cement is used to fix cantilever FDPs on implants, sandblasting of standard titanium abutments may help prevent loss of retention. Retention forces were still high for FDPs fixed with zinc phosphate cement, even when the abutments were not pretreated. Use of permanent cements only, however, is recommended to prevent unwanted loosening of cantilever FDPs.

Dental radiographic units - radiation safety and patient doses

International Nuclear Information System (INIS)

Nagpal, J.S.; Varadharajan, Geetha

2001-01-01

Three models of dental radiographic machines have been examined for radiation safety. Using TL dosemeters, doses received by the patients at chest level and the gonads have been estimated. Care should be taken to shield gonads during dental radiographic examinations. (author)

Legionella spp. in dental unit waterlines.

Science.gov (United States)

Sedlata Juraskova, E; Sedlackova, H; Janska, J; Holy, O; Lalova, I; Matouskova, I

2017-01-01

To determine the current presence of Legionella spp. in the output water of dental unit waterlines (DUWLs) and examine its mitigation by disinfection at the Institute of Dentistry and Oral Sciences, Faculty of Medicine and Dentistry, Palacky University Olomouc and University Hospital Olomouc. The first stage of our survey involved collecting samples of DUWL output water from 50 dental chair units (DCUs), and 2 samples of the incoming potable water. In October 2015, a one-time disinfection (1 % Stabimed) of DUWLs was conducted. This was followed by collecting 10 control samples (survey stage 2). From the total of 50 samples (survey stage 1), 18 samples (36.0 %) tested positive for Legionella spp. Following the disinfection, nine of the ten samples no longer showed any presence of Legionella. Based on culture results, the one-time disinfection (1 % Stabimed) was effective. We are unable to comment on the duration of positive effect of disinfection on the occurrence of Legionella spp. in the outlet water. It was a one-time survey (Tab. 2, Ref. 32).

Evaluation of bacterial contamination of dental unit waterlines and use of a newly designed measurement device to assess retraction of a dental chair unit.

Science.gov (United States)

Ji, Xue-Yue; Fei, Chun-Nan; Zhang, Ying; Zhang, Wei; Liu, Jun; Dong, Jie

2016-08-01

Dental unit waterline (DUWL) output water is delivered through instruments of a dental chair unit (DCU) to irrigate and cool teeth. However, these waterlines can be heavily contaminated with bacteria. The purpose of the present study was to assess retraction and investigate the contamination level and prevalence of bacteria in DUWL output water. Fifty-eight DCUs were randomly selected from 30 hospitals in 10 districts of Tianjin, one of the four special municipalities of China. A unique sampling connector was used in place of the dental handpiece to collect water samples. Evaluation of retraction was accomplished using a retraction measurement device designed in accordance with the International Standard ISO 7494-2:2015(E). A total of 263 water samples were collected, and the highest concentration of bacteria [1.8 × 10(6) colony-forming units (CFU)/mL] was found in the handpiece group. Thirty (51.72%) water samples in the handpiece group and 21 (36.21%) in the air/water syringe groups were cultured, yielding colony counts of > 500 CFU/mL. Potential infectious agents, such as Bacillus cereus, Kocuria kristinae and Pseudomonas fluorescens, were isolated from the water samples. Thirty (51.72%) DCUs failed the retraction evaluation. There was a significant, positive correlation (P < 0.05) between the concentration of bacteria in the water sample and the retracted volume. It is of paramount importance to increase compliance with the standards for controlling DUWL contamination. Routine microbial monitoring and evaluation of retraction are necessary to provide high-quality water for use in dental treatment. © 2016 FDI World Dental Federation.

Laboratory evaluation of anti-biofilm agents for use in dental unit waterlines.

Science.gov (United States)

Meiller, T F; Kelley, J I; Baqui, A A; DePaola, L G

2001-01-01

Dental unit waterline biofilm has been recognized as a potential point of contamination and a risk to patients with any level of immunocompromise. Biofilm in dental unit waterlines, once established, has proven formidable to efforts in disinfection/disruption. This project compared standardized evaluation techniques by assessing the efficacy of a variety of agents that have been reported or suggested as useful in surface disinfection and/or antiseptic protocols. The zones of inhibition, minimum inhibitory/bactericidal concentrations and use-dilution with stainless steel carrier replicates tests assessed the disinfection of planktonic organisms using standardized microbial testing procedures. The disruption and/or disinfection of planktonic and biofilm organisms within naturally occurring dental unit waterlines were evaluated by culture and scanning electron microscopy. The six commercially available antimicrobial agents used to assess the techniques were bleach (sodium hypochlorite), Cavicide, glutaraldehyde, Listerine Antiseptic, Peridex and Sterilex Ultra. Comparisons between the results for each technique evaluated were determined for each product. All six agents demonstrated antimicrobial efficacy at the working concentrations designated by the manufacturers. Biofilm matrix elimination evaluated by scanning electron microscopy found virtually 0% elimination by glutaraldehyde to an estimated 90% elimination by Sterilex Ultra and bleach after one treatment. Treatment with Cavicide, Listerine Antiseptic and Peridex resulted in negligible elimination of the biofilm matrix. For comparability, the use of standardized testing techniques to evaluate a disinfection agent's efficacy against dental unit waterline contamination is essential. This project demonstrates a model system for evaluating disinfection agents potentially useful in the management of dental unit waterline biofilm, and should assist in educating the dental clinician in the appraisal of existing and

Measurements of X ray absorbed doses to dental patients in two dental X ray units in Nigeria

International Nuclear Information System (INIS)

Ogundare, F.O.; Oni, O.M.; Balogun, F.A.

2002-01-01

Measurements of absorbed doses from radiographic examinations to various anatomical sites in the head and neck of patients with an average age of 45 years using intra-oral dental radiography have been carried out. LiF (TLD-100) dosemeters were used for the measurements of the absorbed dose. The measured absorbed doses to the various anatomical sites in the two units are reported, discussed and compared with results from the literature. Quality control measurements were also performed using a Victoreen quality control test device on the X ray units. The tube voltage accuracies for the two units were found to be within acceptable limits (less than ±10%). On the other hand the exposure time accuracies for these units have large deviations (>20%). These results and those that have been reported in the literature may be an indication that high patient doses are common in most dental X ray centres and countries. As a result of this, regular compliance and performance checks of dental diagnostic X ray equipment are essential in order to ensure proper performance and to minimise unnecessary patient and operator doses. (author)

Performance of zirconia ceramic cantilever fixed dental prostheses: 3-year results from a prospective, randomized, controlled pilot study.

Science.gov (United States)

Zenthöfer, Andreas; Ohlmann, Brigitte; Rammelsberg, Peter; Bömicke, Wolfgang

2015-07-01

Little is known about the clinical performance of ceramic cantilever fixed dental prostheses on natural teeth. The purpose of this randomized controlled pilot study was to evaluate the clinical performance of ceramic and metal ceramic cantilever fixed dental prostheses (CFDPs) after 3 years of service. Twenty-one participants were randomly allocated to 2 treatment groups. Participants in the ceramic (ZC) group (n=11) each received 1 CFDP made of yttria-stabilized, tetragonal zirconia polycrystal; the others (n=10) were fitted with a metal ceramic (MC) CFDP. All CFDPs were retained by 2 complete crown abutments and replaced 1 tooth. The clinical target variables were survival, incidence of complications, probing pocket depth (PPD), probing attachment level (PAL), plaque index (PI), gingival index (GI), and esthetic performance as rated by the participants. The United States Public Health Service (USPHS) criteria were used to evaluate chipping, retention, color, marginal integrity, and secondary caries. Descriptive statistics and nonparametric analyses were applied to the target variables in the 2 groups. The esthetic performance of the CFDPs was also visualized by using a pyramid comparison. The overall survival of the CFDPs was 100% in both groups. During the 3-year study, 6 clinically relevant complications requiring aftercare were observed among 5 participants (4 in the ZC group and 2 in the MC group). Changes in the PI, GI, PPD, and PAL of the abutment teeth were similar for both groups (P>.05). The participants regarded the esthetic performance of ZC-CFDPs and MC-CFDPs as satisfactory. Within the 3-year observation period, the clinical performance of MC-FDPs and ZC-FDPs was acceptable. More extensive research with larger sample sizes is encouraged, however, to confirm the evaluation of the survival of Y-TZP hand-veneered cantilever FPDs. Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Survival of anterior cantilevered all-ceramic resin-bonded fixed dental prostheses made from zirconia ceramic.

Science.gov (United States)

Sasse, Martin; Kern, Matthias

2014-06-01

This study evaluated the clinical outcome of all-ceramic resin-bonded fixed dental prostheses (RBFDPs) with a cantilevered single-retainer design made from zirconia ceramic. Forty-two anterior RBFDPs with a cantilevered single-retainer design were made from yttrium oxide-stabilized zirconium oxide ceramic. RBFDPs were inserted using Panavia 21 TC as luting agent after air-abrasion of the ceramic bonding surface. During a mean observation time of 61.8 months two debondings occurred. Both RBFDPs were rebonded using Panavia 21 TC and are still in function. A caries lesion was detected at one abutment tooth during recall and was treated with a composite filling. Therefore, the overall six-year failure-free rate according to Kaplan-Meier was 91.1%. If only debonding was defined as failure the survival rate increased to 95.2%. Since all RBFDPs are still in function the overall survival rate was 100% after six years. Cantilevered zirconia ceramic RBFDPs showed promising results within the observation period. Single-retainer resin-bonded fixed dental prostheses made from zirconia ceramic show very good mid-term clinical survival rates. They should therefore be considered as a viable treatment alternative for the replacement of single missing anterior teeth especially as compared to an implant therapy. Copyright © 2014 Elsevier Ltd. All rights reserved.

Marginal and internal fit of cobalt-chromium fixed dental prostheses generated from digital and conventional impressions.

Science.gov (United States)

Svanborg, Per; Skjerven, Henrik; Carlsson, Pablo; Eliasson, Alf; Karlsson, Stig; Ortorp, Anders

2014-01-01

Objectives. Digital impressions are increasingly used and have the potential to avoid the problem of inaccurate impressions. Only a few studies to verify the accuracy of digital impressions have been performed. The purpose of this study was to compare the marginal and internal fit of 3-unit tooth supported fixed dental prostheses (FDPs) fabricated from digital and conventional impressions. Methods. Ten FDPs were produced from digital impressions using the iTero system and 10 FDPs were produced using vinyl polysiloxane (VPS) impression material. A triple-scan protocol and CAD software were used for measuring and calculating discrepancies of the FDPs at 3 standard areas: mean internal discrepancy, absolute marginal gap, and cervical area discrepancy. The Mann-Whitney U test was used for analyzing the results. Results. For conventional and digital impressions, respectively, FDPs had an absolute marginal gap of 147  μ m and 142  μ m, cervical area discrepancy of 69  μ m and 44  μ m, and mean internal discrepancy of 117  μ m and 93  μ m. The differences were statistically significant in the cervical and internal areas (P digital impression technique is more exact and can generate 3-unit FDPs with a significantly closer fit compared to the VPS technique.

Common dental features and craniofacial development of three siblings with Ter Haar syndrome.

Science.gov (United States)

Parker, K; Pabla, R; Hay, N; Ayliffe, P

2014-02-01

Ter Haar syndrome is a rare genetic syndrome with <30 cases reported worldwide. There is nothing within the published literature regarding the dental development and dental features of these patients. This case series examines three patients with Ter Haar syndrome and tracks their dental development and identifies common dental and skeletal features. All three patients received dental treatment and regular follow-up at Great Ormond Street Hospital Dental Department. These patients have many common dental and craniofacial features which poses the question as to whether these features are due to Ter Haar syndrome.

A fractographic study of clinically retrieved zirconia–ceramic and metal–ceramic fixed dental prostheses

Science.gov (United States)

Pang, Zhen; Chughtai, Asima; Sailer, Irena; Zhang, Yu

2015-01-01

Objectives A recent 3-year randomized controlled trial (RCT) of tooth supported three- to five-unit zirconia–ceramic and metal–ceramic posterior fixed dental prostheses (FDPs) revealed that veneer chipping and fracture in zirconia–ceramic systems occurred more frequently than those in metal–ceramic systems [1]. This study seeks to elucidate the underlying mechanisms responsible for the fracture phenomena observed in this RCT using a descriptive fractographic analysis. Methods Vinyl-polysiloxane impressions of 12 zirconia–ceramic and 6 metal–ceramic FDPs with veneer fractures were taken from the patients at the end of a mean observation of 40.3 ± 2.8 months. Epoxy replicas were produced from these impressions [1]. All replicas were gold coated, and inspected under the optical microscope and scanning electron microscope (SEM) for descriptive fractography. Results Among the 12 zirconia–ceramic FDPs, 2 had small chippings, 9 had large chippings, and 1 exhibited delamination. Out of 6 metal–ceramic FDPs, 5 had small chippings and 1 had large chipping. Descriptive fractographic analysis based on SEM observations revealed that fracture initiated from the wear facet at the occlusal surface in all cases, irrespective of the type of restoration. Significance Zirconia–ceramic and metal–ceramic FDPs all fractured from microcracks that emanated from occlusal wear facets. The relatively low fracture toughness and high residual tensile stress in porcelain veneer of zirconia restorations may contribute to the higher chipping rate and larger chip size in zirconia–ceramic FDPs relative to their metal–ceramic counterparts. The low veneer/core interfacial fracture energy of porcelain-veneered zirconia may result in the occurrence of delamination in zirconia–ceramic FDPs. PMID:26233469

[Decontamination of dental unit waterlines using disinfectants and filters].

Science.gov (United States)

Monarca, S; Garusi, G; Gigola, P; Spampinato, L; Zani, C; Sapelli, P L

2002-10-01

Bacterial contamination of the dental unit water system can become a health problem for patients, particularly if they are immunodepressed. The present study has had the purpose of evaluating the effectiveness of methods of chemical decontamination using different disinfectants (peracetic acid, hydrogen peroxide, silver salts, chloramine T, glutaraldehyde T4) and methods of physical decontamination using synthetic membranes for the filtration of water. A preliminary removal procedure of the biofilm present in the waterline has been followed in a dental unit prepared on purpose for the research; subsequently different 2-week long maintenance procedures were applied using disinfectants injected by a pump and finally the bacterial contamination of the water flowing from the waterline was evaluated. The physical decontamination was performed using 0.22 mm membrane filters, which have been installed also in another dental unit, and the filtered water was analyzed to detect bacterial contamination. The preliminary procedure of biofilm removal succeeded obtaining germ-free water. Among the disinfectants used for the maintenance of the water quality only glutaraldehyde T4 was able to reduce the bacterial contamination under the limit suggested by the ADA. The membrane filter system was not able to purify the water, but when a disinfectant (peracetic acid) was used in the last part of the waterline good results were obtained. At present no decontamination system of dental waterline is available, and glutaraldehyde T4 seems to be the best disinfectant only if integrated with periodic biofilm removal for the maintenance of the water quality.

Precision Fit of Screw-Retained Implant-Supported Fixed Dental Prostheses Fabricated by CAD/CAM, Copy-Milling, and Conventional Methods.

Science.gov (United States)

de França, Danilo Gonzaga; Morais, Maria Helena; das Neves, Flávio D; Carreiro, Adriana Fonte; Barbosa, Gustavo As

The aim of this study was to evaluate the effectiveness of fabrication methods (computer-aided design/computer-aided manufacture [CAD/CAM], copy-milling, and conventional casting) in the fit accuracy of three-unit, screw-retained fixed dental prostheses. Sixteen three-unit implant-supported screw-retained frameworks were fabricated to fit an in vitro model. Eight frameworks were fabricated using the CAD/CAM system, four in zirconia and four in cobalt-chromium. Four zirconia frameworks were fabricated using the copy-milled system, and four were cast in cobalt-chromium using conventional casting with premachined abutments. The vertical and horizontal misfit at the implant-framework interface was measured using scanning electron microscopy at ×250. The results for vertical misfit were analyzed using Kruskal-Wallis and Mann-Whitney tests. The horizontal misfits were categorized as underextended, equally extended, or overextended. Statistical analysis established differences between groups according to the chi-square test (α = .05). The mean vertical misfit was 5.9 ± 3.6 μm for CAD/CAM-fabricated zirconia, 1.2 ± 2.2 μm for CAD/CAM-fabricated cobalt-chromium frameworks, 7.6 ± 9.2 μm for copy-milling-fabricated zirconia frameworks, and 11.8 (9.8) μm for conventionally fabricated frameworks. The Mann-Whitney test revealed significant differences between all but the zirconia-fabricated frameworks. A significant association was observed between the horizontal misfits and the fabrication method. The percentage of horizontal misfits that were underextended and overextended was higher in milled zirconia (83.3%), CAD/CAM cobaltchromium (66.7%), cast cobalt-chromium (58.3%), and CAD/CAM zirconia (33.3%) frameworks. CAD/CAM-fabricated frameworks exhibit better vertical misfit and low variability compared with copy-milled and conventionally fabricated frameworks. The percentage of interfaces equally extended was higher when CAD/CAM and zirconia were used.

Maxillary and mandibular immediately loaded implant-supported interim complete fixed dental prostheses on immediately placed dental implants with a digital approach: A clinical report.

Science.gov (United States)

Lewis, Ryan C; Harris, Bryan T; Sarno, Robert; Morton, Dean; Llop, Daniel R; Lin, Wei-Shao

2015-09-01

This clinical report describes the treatment of maxillary and mandibular immediate implant placement and immediately loaded implant-supported interim complete fixed dental prostheses with a contemporary digital approach. The virtual diagnostic tooth arrangement eliminated the need for a customized radiographic template, and the diagnostic data collection required for computer-guided surgery (digital diagnostic impressions, digital photographs, and a cone beam-computed tomography [CBCT] scan) was completed in a single visit with improved workflow efficiency. Computer-aided design and computer-aided manufacturing (CAD/CAM)-fabricated surgical templates and interim prosthesis templates were made in a dental laboratory to facilitate computer-guided surgery and the immediate loading process. Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Interceptive Correction of Anterior Crossbite Using Short-Span Wire-Fixed Orthodontic Appliance: A Report of Three Cases

Directory of Open Access Journals (Sweden)

S. Nagarajan M. P. Sockalingam

2018-01-01

Full Text Available Anterior crossbite is relatively a common presentation in the mixed dentition stage. If left untreated, it can lead to a host of problems and may complicate future orthodontic treatment. One of the major difficulties in performing anterior crossbite correction in young children is treatment compliance. In most cases, poor compliance is due to the unacceptability of the removable appliance used. This article describes three cases of successful correction of anterior crossbite of patients in mixed dentition using short-span wire-fixed orthodontic appliances. This sectional appliance provides an alternative method of correcting anterior crossbite of dental origin and offers many advantages compared to the use of removable appliances.

Dental care for aging populations in Denmark, Sweden, Norway, United kingdom, and Germany

DEFF Research Database (Denmark)

Holm-Pedersen, Poul; Vigild, Merete; Nitschke, Ina

2005-01-01

This article reviews access to and financing of dental care for aging populations in selected nations in Europe. Old age per se does not seem to be a major factor in determining the use of dental services. Dentition status, on the other hand, is a major determinant of dental attendance. In additi...... in Europe as well as in the United States....... dentistry discourage dentists from seeking opportunities to treat geriatric patients? Overall, the availability of dental services, the organization of the dental health care delivery system, and price subsidy for dental treatment are important factors influencing access to dental care among older people...

Efficiency of light curing units in a government dental school.

Science.gov (United States)

Nassar, Hani M; Ajaj, Reem; Hasanain, Fatin

2018-01-01

The light intensity of a light-curing unit is a crucial factor that affects the clinical longevity of resin composites. This study aimed to investigate the efficiency of light-curing units in use at a local governmental dental school for curing conventional and bulk-fill resin materials. A total of 166 light-curing units at three locations were examined, and the brand, type, clinic location, diameter of curing tip, tip cleanliness (using a visual score), and the output (in mW/cm 2 using a digital radiometer) were recorded. Only 23.5% of the units examined had clean tips, with the graduate student clinical area containing the highest percentage of clean tips. Further, tips with poor cleanliness score values were associated with significantly lower output intensities. A small percentage (9.4%) of units was capable of producing intensities higher than 1,200 mW/cm 2 and lower than 600 mW/cm 2 (7.6%). The majority of the low intensity units were located in the undergraduate student area, which also contained the highest number of units with intensities between 900 and 1,200 mW/cm 2 . The output of all the units in service was satisfactory for curing conventional resin composites, and most units were capable of curing bulk-fill resin materials.

Hereditary epidermolysis bullosa. Dental management of three cases.

Science.gov (United States)

Serrano Martínez, C; Silvestre Donat, F J; Bagán Sebastián, J V; Peñarrocha Diago, M; Alió Sanz, J J

2001-01-01

Hereditary epidermolysis bullosa (EB) is a mucocutaneous disorder characterized by the appearance of blisters and vesicles in response to minimum friction. The digestive mucosa is one of the most frequently affected regions--including the oral mucosa. Three types of EB have been established according to the histological level of the lesion. Thus, simple EB involves intraepidermal bullae that leave no scars, while junctional EB exhibit blisters between the lamina lucida and lamina densa of the basal membrane. These lesions heal leaving atrophy and involve important hypoplastic lesions in the dental enamel. In turn, dystrophic EB presents synechiae-forming subepidermal blisters--the recessive form being the variant involving the greatest oral lesions (microstomia, ankyloglossia, milium cysts and rampant caries). Three cases of EB are presented and their clinical-dental management difficulties are described. The oral manifestations are described, along with the dental treatments provided and the evolution of the periodontal indices over a two-year period following the application of hygiene-preventive and therapeutic measures.

Dental Health Services Research Unit celebrates 30 years: Report of conference to mark the 30th anniversary of the Dental Health Services Research Unit (DHSRU) at Dundee, held on 1st December 2008.

Science.gov (United States)

Eaton, Kenneth A; Pitts, Nigel B

2009-04-01

Over the years, several members of the staff of the Dental Health Services Research Unit (DHSRU) at Dundee have published papers in Primary Dental Care. Furthermore, its Director, Professor Nigel Pitts, together with Drs Jan Clarkson and Gail Topping have co-edited a number of the Faculty of General Dental Practice (UK)'s standards manuals and contributed to others. It had been suggested to the Unit by several parties that, having been in funded existence for some 30 years, it would be appropriate to mark this anniversary with a conference to explore 'Dental Health Services Research: After 30 years, what was the impact, what have we learned and where are we going?' So, following a range of consultations, the conference was convened at the West Park Conference Centre in Dundee with a mixed audience representing both dental research and dental practice.

Two-unit cantilevered resin-bonded fixed partial denture as a substitute for a prosthodontic-orthodontic treatment plan: a 5-year case report.

Science.gov (United States)

Emami, Elham; St-Georges, Annie; de Grandmont, Pierre

2012-01-01

In this case report, we describe the successful long-term treatment of a patient with dental agenesis. The initial treatment plan included an orthodontic phase to provide adequate space for replacing missing lateral incisors with implants. However, because of some complications encountered after 2 years of orthodontic treatment, a revised treatment plan was considered to achieve functional and esthetic goals. The patient was completely satisfied 5 years after being treated with two 2-unit cantilevered resin-bonded fixed partial dentures supported by the cuspids. This conservative treatment plan was cost-effective without having any significant biological cost.

Reliability and failure modes of implant-supported zirconium-oxide fixed dental prostheses related to veneering techniques

Science.gov (United States)

Baldassarri, Marta; Zhang, Yu; Thompson, Van P.; Rekow, Elizabeth D.; Stappert, Christian F. J.

2011-01-01

Summary Objectives To compare fatigue failure modes and reliability of hand-veneered and over-pressed implant-supported three-unit zirconium-oxide fixed-dental-prostheses(FDPs). Methods Sixty-four custom-made zirconium-oxide abutments (n=32/group) and thirty-two zirconium-oxide FDP-frameworks were CAD/CAM manufactured. Frameworks were veneered with hand-built up or over-pressed porcelain (n=16/group). Step-stress-accelerated-life-testing (SSALT) was performed in water applying a distributed contact load at the buccal cusp-pontic-area. Post failure examinations were carried out using optical (polarized-reflected-light) and scanning electron microscopy (SEM) to visualize crack propagation and failure modes. Reliability was compared using cumulative-damage step-stress analysis (Alta-7-Pro, Reliasoft). Results Crack propagation was observed in the veneering porcelain during fatigue. The majority of zirconium-oxide FDPs demonstrated porcelain chipping as the dominant failure mode. Nevertheless, fracture of the zirconium-oxide frameworks was also observed. Over-pressed FDPs failed earlier at a mean failure load of 696 ± 149 N relative to hand-veneered at 882 ± 61 N (profile I). Weibull-stress-number of cycles-unreliability-curves were generated. The reliability (2-sided at 90% confidence bounds) for a 400N load at 100K cycles indicated values of 0.84 (0.98-0.24) for the hand-veneered FDPs and 0.50 (0.82-0.09) for their over-pressed counterparts. Conclusions Both zirconium-oxide FDP systems were resistant under accelerated-life-time-testing. Over-pressed specimens were more susceptible to fatigue loading with earlier veneer chipping. PMID:21557985

Comparison of marginal and internal fit of 3-unit ceramic fixed dental prostheses made with either a conventional or digital impression.

Science.gov (United States)

Su, Ting-Shu; Sun, Jian

2016-09-01

For 20 years, the intraoral digital impression technique has been applied to the fabrication of computer aided design and computer aided manufacturing (CAD-CAM) fixed dental prostheses (FDPs). Clinical fit is one of the main determinants of the success of an FDP. Studies of the clinical fit of 3-unit ceramic FDPs made by means of a conventional impression versus a digital impression technology are limited. The purpose of this in vitro study was to evaluate and compare the internal fit and marginal fit of CAD-CAM, 3-unit ceramic FDP frameworks fabricated from an intraoral digital impression and a conventional impression. A standard model was designed for a prepared maxillary left canine and second premolar and missing first premolar. The model was scanned with an intraoral digital scanner, exporting stereolithography (STL) files as the experimental group (digital group). The model was used to fabricate 10 stone casts that were scanned with an extraoral scanner, exporting STL files to a computer connected to the scanner as the control group (conventional group). The STL files were used to produce zirconia FDP frameworks with CAD-CAM. These frameworks were seated on the standard model and evaluated for marginal and internal fit. Each framework was segmented into 4 sections per abutment teeth, resulting in 8 sections per framework, and was observed using optical microscopy with ×50 magnification. Four measurement points were selected on each section as marginal discrepancy (P1), mid-axial wall (P2), axio-occusal edge (P3), and central-occlusal point (P4). Mean marginal fit values of the digital group (64 ±16 μm) were significantly smaller than those of the conventional group (76 ±18 μm) (Pdigital group (111 ±34 μm) were significantly smaller than those of the conventional group (132 ±44 μm) (Pdigital and conventional impressions showed clinically acceptable marginal and internal fit. The marginal and internal fit of frameworks fabricated from the intraoral

Marginal and Internal Fit of Cobalt-Chromium Fixed Dental Prostheses Generated from Digital and Conventional Impressions

Directory of Open Access Journals (Sweden)

Per Svanborg

2014-01-01

Full Text Available Objectives. Digital impressions are increasingly used and have the potential to avoid the problem of inaccurate impressions. Only a few studies to verify the accuracy of digital impressions have been performed. The purpose of this study was to compare the marginal and internal fit of 3-unit tooth supported fixed dental prostheses (FDPs fabricated from digital and conventional impressions. Methods. Ten FDPs were produced from digital impressions using the iTero system and 10 FDPs were produced using vinyl polysiloxane (VPS impression material. A triple-scan protocol and CAD software were used for measuring and calculating discrepancies of the FDPs at 3 standard areas: mean internal discrepancy, absolute marginal gap, and cervical area discrepancy. The Mann-Whitney U test was used for analyzing the results. Results. For conventional and digital impressions, respectively, FDPs had an absolute marginal gap of 147 μm and 142 μm, cervical area discrepancy of 69 μm and 44 μm, and mean internal discrepancy of 117 μm and 93 μm. The differences were statistically significant in the cervical and internal areas (P<0.001. Significance. The results indicated that the digital impression technique is more exact and can generate 3-unit FDPs with a significantly closer fit compared to the VPS technique.

Structural, Surface, in vitro Bacterial Adhesion and Biofilm Formation Analysis of Three Dental Restorative Composites

Directory of Open Access Journals (Sweden)

Maria T. Azam

2015-06-01

Full Text Available This study was conducted to investigate the relationship between dental materials and bacterial adhesion on the grounds of their chemical composition and physical properties. Three commercially available dental restorative materials (Filtek™Z350, Filtek™P90 and Spectrum®TPH® were structurally analyzed and their wettability and surface roughness were evaluated by using Fourier Transform Infrared Spectroscopy, Contact Angle Measurement and Atomic Force Microscopy, respectively. These materials were molded into discs and tested with three bacterial strains (Staphylococcus aureus, Pseudomonas aeruginosa and Escherichia for microbial attachment. The bacterial adhesion was observed at different time intervals, i.e., 0 h, 8 h, 24 h, 48 h and 72 h, along with Colony Forming Unit Count and Optical Density measurement of the media. It was found that all materials showed a degree of conversion with time intervals, i.e., 0 h, 8 h, 24 h, 48 h and 72 h, which led to the availability of functional groups (N–H and C–H that might promote adhesion. The trend in difference in the extent of bacterial adhesion can be related to particle size, chemical composition and surface wettability of the dental materials.

3D Metal Printing - Additive Manufacturing Technologies for Frameworks of Implant-Borne Fixed Dental Prosthesis.

Science.gov (United States)

Revilla León, M; Klemm, I M; García-Arranz, J; Özcan, M

2017-09-01

An edentulous patient was rehabilitated with maxillary metal-ceramic and mandibular metal-resin implant-supported fixed dental prosthesis (FDP). Metal frameworks of the FDPs were fabricated using 3D additive manufacturing technologies utilizing selective laser melting (SLM) and electron beam melting (EBM) processes. Both SLM and EBM technologies were employed in combination with computer numerical control (CNC) post-machining at the implant interface. This report highlights the technical and clinical protocol for fabrication of FDPs using SLM and EBM additive technologies. Copyright© 2017 Dennis Barber Ltd.

Statistical modeling of dental unit water bacterial test kit performance.

Science.gov (United States)

Cohen, Mark E; Harte, Jennifer A; Stone, Mark E; O'Connor, Karen H; Coen, Michael L; Cullum, Malford E

2007-01-01

While it is important to monitor dental water quality, it is unclear whether in-office test kits provide bacterial counts comparable to the gold standard method (R2A). Studies were conducted on specimens with known bacterial concentrations, and from dental units, to evaluate test kit accuracy across a range of bacterial types and loads. Colony forming units (CFU) were counted for samples from each source, using R2A and two types of test kits, and conformity to Poisson distribution expectations was evaluated. Poisson regression was used to test for effects of source and device, and to estimate rate ratios for kits relative to R2A. For all devices, distributions were Poisson for low CFU/mL when only beige-pigmented bacteria were considered. For higher counts, R2A remained Poisson, but kits exhibited over-dispersion. Both kits undercounted relative to R2A, but the degree of undercounting was reasonably stable. Kits did not grow pink-pigmented bacteria from dental-unit water identified as Methylobacterium rhodesianum. Only one of the test kits provided results with adequate reliability at higher bacterial concentrations. Undercount bias could be estimated for this device and used to adjust test kit results. Insensitivity to methylobacteria spp. is problematic.

Maintaining radiation exposures as low as reasonably achievable (ALARA) for dental personnel operating portable hand-held x-ray equipment.

Science.gov (United States)

McGiff, Thomas J; Danforth, Robert A; Herschaft, Edward E

2012-08-01

Clinical experience indicates that newly available portable hand-held x-ray units provide advantages compared to traditional fixed properly installed and operated x-ray units in dental radiography. However, concern that hand-held x-ray units produce higher operator doses than fixed x-ray units has caused regulatory agencies to mandate requirements for use of hand-held units that go beyond those recommended by the manufacturer and can discourage the use of this technology. To assess the need for additional requirements, a hand-held x-ray unit and a pair of manikins were used to measure the dose to a simulated operator under two conditions: exposures made according to the manufacturer's recommendations and exposures made according to manufacturer's recommendation except for the removal of the x-ray unit's protective backscatter shield. Dose to the simulated operator was determined using an array of personal dosimeters and a pair of pressurized ion chambers. The results indicate that the dose to an operator of this equipment will be less than 0.6 mSv y⁻¹ if the device is used according to the manufacturer's recommendations. This suggests that doses to properly trained operators of well-designed, hand-held dental x-ray units will be below 1.0 mSv y⁻¹ (2% of the annual occupational dose limit) even if additional no additional operational requirements are established by regulatory agencies. This level of annual dose is similar to those reported as typical dental personnel using fixed x-ray units and appears to satisfy the ALARA principal for this class of occupational exposures.

Alignment Strategy for Constricted Maxillary Dental Arch in Patients With Unilateral Cleft Lip and Palate Using Fixed Orthodontic Appliance.

Science.gov (United States)

Park, Yoon-Hee; Park, Sumin; Baek, Seung-Hak

2018-03-01

The purpose of this study was to compare the alignment pattern of the constricted maxillary dental arch by fixed orthodontic treatment (FOT) in the well-aligned and constricted arches of unilateral cleft lip and palate (UCLP) patients. 19 UCLP patients were divided into Group 1 (well-aligned arch, n = 9) and Group 2 (constricted arch, n = 10). After the cephalometric and maxillary dental arch variables before (T1) and after FOT (T2) were measured, statistical analysis was performed. There were no significant differences in the surgical timing of cheiloplasty, palatoplasty, and secondary alveolar bone grafting and in the surgical method of cheiloplasty between the 2 groups. However, Group 2 had a higher percentage of palatoplasty method, which could leave the denuded bone for secondary healing than Group 1 (P dental arch compared to Group 1 at the T1 stage (inter-second premolar width, greater segment angle [GSA], and lesser segment angle [LSA], all P dental arch shape, different strategy is necessary to obtain proper alignment by FOT.

Simultaneous functional and fixed appliance therapy for growth modification and dental alignment prior to prosthetic habilitation in hypohidrotic ectodermal dysplasia: a clinical report.

Science.gov (United States)

Suri, Sunjay; Carmichael, Robert P; Tompson, Bryan D

2004-11-01

This clinical report describes the simultaneous use of functional and fixed appliances to modify the pattern of dentofacial development and align teeth in preparation for prosthodontic habilitation of a growing child with hypohidrotic ectodermal dysplasia. The treatment objective was to create a more favorable starting point for the prosthodontic phase of habilitation by improving the sagittal and vertical skeletal relationships and facial esthetics. This was accomplished through growth modification with functional appliances conducted simultaneously with eruption of maxillary and mandibular molars, dental arch expansion, alignment, and space management using fixed orthodontic appliances. Orthodontic retention was accomplished by means of removable partial dentures. A second phase of orthodontics conducted closer to the age of skeletal maturation will aim at definitive tooth alignment in preparation for dental implant-supported restorations.

Management of dental unit waterline biofilms in the 21st century.

LENUS (Irish Health Repository)

O'Donnell, Mary J

2011-10-01

Dental chair units (DCUs) use water to cool and irrigate DCU-supplied instruments and tooth surfaces, and provide rinsewater during dental treatment. A complex network of interconnected plastic dental unit waterlines (DUWLs) supply water to these instruments. DUWLs are universally prone to microbial biofilm contamination seeded predominantly from microorganisms in supply water. Consequently, DUWL output water invariably becomes contaminated by high densities of microorganisms, principally Gram-negative environmental bacteria including Pseudomonas aeruginosa and Legionella species, but sometimes contain human-derived pathogens such as Staphylococcus aureus. Patients and staff are exposed to microorganisms from DUWL output water and to contaminated aerosols generated by DCU instruments. A wide variety of approaches, many unsuccessful, have been proposed to control DUWL biofilm. More recently, advances in biofilm science, chemical DUWL biofilm treatment agents, DCU design, supply water treatment and development of automated DUWL biofilm control systems have provided effective long-term solutions to DUWL biofilm control.

Inlay-Retained Fixed Dental Prosthesis: A Clinical Option Using Monolithic Zirconia

Directory of Open Access Journals (Sweden)

Davide Augusti

2014-01-01

Full Text Available Different indirect restorations to replace a single missing tooth in the posterior region are available in dentistry: traditional full-coverage fixed dental prostheses (FDPs, implant-supported crowns (ISC, and inlay-retained FDPs (IRFDP. Resin bonded FDPs represent a minimally invasive procedure; preexisting fillings can minimize tooth structure removal and give retention to the IRFDP, transforming it into an ultraconservative option. New high strength zirconia ceramics, with their stiffness and high mechanical properties, could be considered a right choice for an IRFDP rehabilitation. The case report presented describes an IRFDP treatment using a CAD/CAM monolithic zirconia IRFDP; clinical and laboratory steps are illustrated, according to the most recent scientific protocols. Adhesive procedures are focused on the Y-TZP and tooth substrate conditioning methods. Nice esthetic and functional integration of indirect restoration at two-year follow-up confirmed the success of this conservative approach.

Application of digital diagnostic impression, virtual planning, and computer-guided implant surgery for a CAD/CAM-fabricated, implant-supported fixed dental prosthesis: a clinical report.

Science.gov (United States)

Stapleton, Brandon M; Lin, Wei-Shao; Ntounis, Athanasios; Harris, Bryan T; Morton, Dean

2014-09-01

This clinical report demonstrated the use of an implant-supported fixed dental prosthesis fabricated with a contemporary digital approach. The digital diagnostic data acquisition was completed with a digital diagnostic impression with an intraoral scanner and cone-beam computed tomography with a prefabricated universal radiographic template to design a virtual prosthetically driven implant surgical plan. A surgical template fabricated with computer-aided design and computer-aided manufacturing (CAD/CAM) was used to perform computer-guided implant surgery. The definitive digital data were then used to design the definitive CAD/CAM-fabricated fixed dental prosthesis. Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

SensInDenT-Noncontact Sensors Integrated Into Dental Treatment Units.

Science.gov (United States)

Teichmann, Daniel; Teichmann, Maren; Weitz, Philippe; Wolfart, Stefan; Leonhardt, Steffen; Walter, Marian

2017-02-01

This paper presents the first system design (SensInDenT) for noncontact cardiorespiratory monitoring during dental treatment. The system is integrated into a dental treatment unit, and combines sensors based on electromagnetic, optical, and mechanical coupling at different sensor locations. The measurement principles and circuits are described and a system overview is presented. Furthermore, a first proof of concept is provided by taking measurements in healthy volunteers under laboratory conditions.

A randomized controlled clinical trial of 3-unit posterior zirconia-ceramic fixed dental prostheses (FDP) with layered or pressed veneering ceramics: 3-year results.

Science.gov (United States)

Naenni, Nadja; Bindl, Andreas; Sax, Caroline; Hämmerle, Christoph; Sailer, Irena

2015-11-01

The aim of the present pilot study was to test whether or not posterior zirconia-ceramic fixed dental prostheses (FDPs) with pressed veneering ceramic exhibit less chipping than FDPs with layered veneering ceramics. Forty patients (13 female, 27 male; mean age 54 years (range 26.1-80.7 years) in need of one maxillary or mandibular three-unit FDP in the second premolar or molar region were recruited and treated at two separate centers at the University of Zurich according to the same study protocol. The frameworks were made out of zirconia using a CAD/CAM system (Cerec Sirona, Bensheim, Germany). The patients were randomly assigned to either the test group (zirconia frameworks veneered with pressed ceramic; IPS e.max ZirPress, Ivoclar Vivadent AG, Schaan, Liechtenstein; n=20) or the control group (layered veneering ceramic; IPS e.max Ceram, Ivoclar Vivadent AG, Schaan, Liechtenstein; n=20). All FDPs were adhesively cemented and evaluated at baseline (i.e., cementation), at 6 months and at 1 and 3 years of clinical service. The survival of the reconstruction was recorded. The technical outcome was assessed using modified United States Public Health Services (USPHS) criteria. The biologic parameters analyzed at abutment teeth and analogous non-restored teeth included probing pocket depth (PPD), plaque control record (PCR), bleeding on probing (BOP), and tooth vitality (CO2). Data was descriptively analyzed and survival was calculated using Kaplan-Meier statistics. 36 patients (25 female, 11 male; mean age 52.3 years) with 18 test and 18 control FDPs were examined after a mean follow-up of 36 months (95% CI: 32.6-39.1 months). Comparison of groups was done by Crosstabulation showing even distribution of the respective restored teeth amidst the groups. Survival rate was 100% for both test and control FDPs. Chipping of the veneering ceramic tended to occur more frequently in test (n=8; 40%) than in control (n=4; 20%) FDPs, albeit not significantly (p=0.3). No further

Biofilm problems in dental unit water systems and its practical control.

LENUS (Irish Health Repository)

Coleman, D C

2009-05-01

Dental chair units (DCUs) contain integrated systems that provide the instruments and services for a wide range of dental procedures. DCUs use water to cool and irrigate DCU-supplied instruments and tooth surfaces during dental treatment. Water is supplied to these instruments by a network of interconnected narrow-bore (2-3 mm) plastic tubes called dental unit waterlines (DUWLs). Many studies over the last 40 years demonstrated that DUWL output water is often contaminated with high densities of micro-organisms, predominantly Gram-negative aerobic heterotropic environmental bacteria, including Legionella and Pseudomonas species. Untreated DUWLs host biofilms that permit micro-organisms to multiply and disperse through the water network and which are aerosolized by DCU instrument use, thus exposing patients and staff to these micro-organisms, to fragments of biofilm and bacterial endotoxins. This review concentrates on how practical developments and innovations in specific areas can contribute to effective DUWL biofilm control. These include the use of effective DUWL treatment agents, improvements to DCU supply water quality, DCU design changes, development of automated DUWL treatment procedures that are effective at controlling biofilm in the long-term and require minimal human intervention, are safe for patients and staff, and which do not cause deterioration of DCU components following prolonged use.

Standardizing failure, success, and survival decisions in clinical studies of ceramic and metal-ceramic fixed dental prostheses.

Science.gov (United States)

Anusavice, Kenneth J

2012-01-01

-dependent survival probability of ceramic fixed dental prostheses (FDPs). Based on the review of clinical trials and systematic reviews of these trials, the present study was designed to develop guidelines for classifying the functional performance, success, survival, and susceptibility to chipping fracture, and subsequent treatment of ceramic and metal-ceramic restorations. To develop comprehensive descriptive guidelines and a clinical reporting form to assist dental scientists in their analyses of chipping fracture behavior of metal-ceramic and all-ceramic prostheses with particular emphasis on veneered-zirconia restorations. These guidelines are required to optimize the recording of fracture features that can be used to differentiate ceramic chipping fracture from bulk fracture and to assist dentists in identifying subsequent treatment that may minimize the need to replace affected restorations. A recording form for clinical fracture observations must be sufficiently clear and complete so that dental health professionals can translate the most relevant information in a context that allows their patients to fully understand the potential risks and benefits of treatment with ceramic restorations. It should clearly allow a clinician to determine whether or not a ceramic fracture constitutes a failure, which requires replacement of the prosthesis, or whether the fracture surface is relatively small or located in a nonfunctional area, i.e., one that is not contribute to occlusion, esthetics, proximal contacts, or food impaction. To accomplish this task, a review of the relevant publications of clinical trials was necessary to identify the variability in reporting of fracture events. The reviews were focused on clinical research studies of zirconia-based FDPs and PFM FDPs, which had been monitored through recall exams for three years or more. These reports and systematic reviews of all relevant publications were published in English dental journals between 2004 and 2010.The primary

Computer-Based Oral Hygiene Instruction versus Verbal Method in Fixed Orthodontic Patients

Science.gov (United States)

Moshkelgosha, V.; Mehrvarz, Sh.; Saki, M.; Golkari, A.

2017-01-01

Statement of Problem: Fixed orthodontic appliances in the oral cavity make tooth cleaning procedures more complicated. Objectives: This study aimed to compare the efficacy of computerized oral hygiene instruction with verbal technique among fixed orthodontic patients referred to the evening clinic of Orthodontics of Shiraz Dental School. Materials and Methods: A single-blind study was performed in Orthodontic Department of Shiraz, Islamic Republic of Iran, from January to May 2015 following the demonstrated exclusion and inclusion criteria. The sample size was considered 60 patients with 30 subjects in each group. Bleeding on probing and plaque indices and dental knowledge were assessed in the subjects to determine pre-intervention status. A questionnaire was designed for dental knowledge evaluation. The patients were randomly assigned into the computerized and verbal groups. Three weeks after the oral hygiene instruction, indices of bleeding on probing and plaque index and the dental knowledge were evaluated to investigate post-intervention outcome. The two groups were compared by chi-square and student t tests. The pre- and post-intervention scores in each group were compared using paired t-test. Results: In the computerized group, the mean score for plaque index and bleeding on probing index was significantly decreased while dental health knowledge was significantly increased after oral hygiene instruction, in contrast to the verbal group. Conclusions: Within the limitations of the current study, computerized oral hygiene instruction is proposed to be more effective in providing optimal oral health status compared to the conventional method in fixed orthodontic patients. PMID:28959765

To what extent does the longevity of fixed dental prostheses depend on the function of the cement? Working Group 4 materials : cementation

NARCIS (Netherlands)

Edelhoff, Daniel; Ozcan, Mutlu

Aims/Background: The objective of this review was to define the impact of cementation mode on the longevity of different types of single tooth restorations and fixed dental prostheses (FDP). Methods: Literature search by PubMed as the major database was used utilizing the terms namely, adhesive

Mechanical equilibrium of forces and moments applied on orthodontic brackets of a dental arch: Correlation with literature data on two and three adjacent teeth.

Science.gov (United States)

Wagner, Delphine; Bolender, Yves; Rémond, Yves; George, Daniel

2017-01-01

Although orthodontics have greatly improved over the years, understanding of its associated biomechanics remains incomplete and is mainly based on two dimensional (2D) mechanical equilibrium and long-time clinical experience. Little experimental information exists in three dimensions (3D) about the forces and moments developed on orthodontic brackets over more than two or three adjacent teeth. We define here a simplified methodology to quantify 3D forces and moments applied on orthodontic brackets fixed on a dental arch and validate our methodology using existing results from the literature by means of simplified hypotheses.

Dental image replacement on cone beam computed tomography with three-dimensional optical scanning of a dental cast, occlusal bite, or bite tray impression.

Science.gov (United States)

Kang, S-H; Lee, J-W; Lim, S-H; Kim, Y-H; Kim, M-K

2014-10-01

The goal of the present study was to compare the accuracy of dental image replacement on a cone beam computed tomography (CBCT) image using digital image data from three-dimensional (3D) optical scanning of a dental cast, occlusal bite, and bite tray impression. A Bracket Typodont dental model was used. CBCT of the dental model was performed and the data were converted to stereolithography (STL) format. Three experimental materials, a dental cast, occlusal bite, and bite tray impression, were optically scanned in 3D. STL files converted from the CBCT of the Typodont model and the 3D optical-scanned STL files of the study materials were image-registered. The error range of each methodology was measured and compared with a 3D optical scan of the Typodont. For the three materials, the smallest error observed was 0.099±0.114mm (mean error±standard deviation) for registering the 3D optical scan image of the dental cast onto the CBCT dental image. Although producing a dental cast can be laborious, the study results indicate that it is the preferred method. In addition, an occlusal bite is recommended when bite impression materials are used. Copyright © 2014 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Effect of tightening torque on the marginal adaptation of cement-retained implant-supported fixed dental prostheses.

Science.gov (United States)

Ghanbarzadeh, Jalil; Dashti, Hossin; Karamad, Reza; Alikhasi, Marzieh; Nakhaei, Mohammadreza

2015-01-01

The final position of the abutment changes with the amount of tightening torque. This could eventually lead to loss of passivity and marginal misfit of prostheses. The aim of this study was to evaluate the effect of three different tightening torques on the marginal adaptation of 3-unit cement-retained implant-supported fixed dental prostheses (FDPs). Two implants (Straumann) were inserted in an acrylic block so that one of the implants was placed vertically and the other at a 15° vertical angle. A straight abutment and a 15° angulated abutment were connected to the vertically and obliquely installed implants, respectively, so that the two abutments were parallel. Then, 10 cement-retained FDPs were waxed and cast. Abutments were tightened with 10, 20, and 35 Ncm torques, respectively. Following each tightening torque, FDPs were luted on respective abutments with temporary cement. The marginal adaptation of the retainers was evaluated using stereomicroscope. FDPs were then removed from the abutments and were sectioned at the connector sites. The retainers were luted again on their respective abutments. Luting procedures and marginal adaptation measurement were repeated. Data were analyzed by ANOVA and least significant difference tests (α = 0.05). After cutting the FDP connectors, the independent samples t-test was used to compare misfit values (α = 0.05). Following 10, 20, and 35 Ncm tightening torques, the marginal discrepancy of the retainers of FDPs significantly increased (P marginal discrepancies of these two retainers (P > 0.05). The marginal gap values of angulated abutment retainers (ANRs) were significantly higher than those of the straight abutment after cutting the connectors (P = 0.026). Within the limitations of this study, the marginal misfit of cement-retained FDPs increased continuously when the tightening torque increased. After cutting the connectors, the marginal misfit of the ANRs was higher than those of the straight abutment retainers.

Comparative policies of two national dental associations: Norway and the United States.

Science.gov (United States)

Helöe, L A

1991-01-01

The major issues and challenges confronting the dental professions in the United States and Norway were studied through speeches of and interviews with the presidents of the American Dental Association (ADA) and the Norwegian Dental Association (NDA) in the period 1980-86. The issues most frequently dealt with related to public authorities, particularly legislation and government involvement in dental practice. Anxiety concerning "busyness," the future dental market, and a drop in the quality of applicants to dental schools were also major subjects. The spokespersons of both associations were engaged in increasing the demand for dental services by marketing, but they were ambivalent regarding advertising, especially individual advertising. Both were concerned with protecting dentistry's autonomy. While the Norwegian presidents apparently feared the medical profession's influence upon dentistry, the Americans were concerned with the hygienists and denturists, and with the insurance companies which they suspected of intruding into the dentist-patient relationship. The presidents' statements, which frequently varied, were apparently influenced by the current domestic political climate, the basic socio-political principles of the two countries, and the different socio-demographic make-up of their memberships.

Effect of Fluoride Mouthrinse and Toothpaste on Number of Streptococcal Colony Forming Units of Dental Plaque

Directory of Open Access Journals (Sweden)

SE Jabbarifar

2005-11-01

Full Text Available Background: Frequent topical fluoride therapy through toothpaste, mouthrinse, professional gels and solutions causes decrease in incidence, pause and repair of dental caries in the enamel. These mechanisms are done through penetration of fluoride ions (F- and their replacement with hydroxyl ions (OH- of hydroxyappatite of enamel, interfere with microbial metabolism of dental plaque and bacteriostatic effect on some cariogenic bacterial strains such as streptococci. The aim of this study was to examine the effect of fluoride mouthrinse and toothpaste on the number of streptococcal colony forming units of dental plaque. Methods: 62 children with 6-7 years old were put in two groups. Samples of dental plaque from each group were collected both before and after use of the fluoride mouthrinse and or toothpaste. The samples were cultured on blood agar to find the number of streptococcal colony forming units (CFU. The mean colony forming unit was compared inter and intra groups before and after application of Fluoride products. Results: The streptococcal CFU of dental plaque before and after use of the mouthrinse and toothpaste respectively was (1240±1367, 1253±1341.5 and (551±716, 898±1151. Statistically, the streptococcal CFU in each group before and after use of the toothpaste and mouthrinse was significantly different. Conclusion: The findings of this study indicated that the fluoride toothpaste and mouthrinse reduce number of streptococcal colony forming units of dental plaque. Also this reduction was not depended on level of (F- Ions, sort of vehicle of fluoride and frequent application of the fluoride mouthrinse and toothpaste. Keywords: fluoride mouthrinse, fluoride toothpaste, colony forming unit (CFU, streptococcus

A centralised, automated dental hospital water quality and biofilm management system using neutral Ecasol maintains dental unit waterline output at better than potable quality: a 2-year longitudinal study.

LENUS (Irish Health Repository)

O'Donnell, M J

2009-10-01

Most studies addressing biofilm formation in dental chair unit waterlines (DUWLs) have focused on a range of individual dental chair units (DCUs) and no studies on a centralised approach in a large number of DCUs have been reported to date.

[Extension of (extremely) shortened dental arches by fixed or removable partial dentures

NARCIS (Netherlands)

Witter, D.J.; Hoefnagel, R.A.; Snoek, P.A.; Creugers, N.H.J.

2009-01-01

Whether a shortened dental arch needs to be extended depends on the degree of the shortening. Four categories of shortened dental arches can be distinguished: 1. slightly shortened dental arches; 2. moderately shortened dental arches; 3. extremely shortened dental arches; and 4. asymmetrical

Information-Seeking Behaviors of Dental Practitioners in Three Practice-Based Research Networks

Science.gov (United States)

Botello-Harbaum, Maria T.; Demko, Catherine A.; Curro, Frederick A.; Rindal, D. Brad; Collie, Damon; Gilbert, Gregg H.; Hilton, Thomas J.; Craig, Ronald G.; Wu, Juliann; Funkhouser, Ellen; Lehman, Maryann; McBride, Ruth; Thompson, Van; Lindblad, Anne

2013-01-01

Research on the information-seeking behaviors of dental practitioners is scarce. Knowledge of dentists’ information-seeking behaviors should advance the translational gap between clinical dental research and dental practice. A cross-sectional survey was conducted to examine the self-reported information-seeking behaviors of dentists in three dental practice-based research networks (PBRNs). A total of 950 dentists (65 percent response rate) completed the survey. Dental journals and continuing dental education (CDE) sources used and their influence on practice guidance were assessed. PBRN participation level and years since dental degree were measured. Full-participant dentists reported reading the Journal of the American Dental Association and General Dentistry more frequently than did their reference counterparts. Printed journals were preferred by most dentists. A lower proportion of full participants obtained their CDE credits at dental meetings compared to partial participants. Experienced dentists read other dental information sources more frequently than did less experienced dentists. Practitioners involved in a PBRN differed in their approaches to accessing information sources. Peer-reviewed sources were more frequently used by full participants and dentists with fifteen years of experience or more. Dental PBRNs potentially play a significant role in the dissemination of evidence-based information. This study found that specific educational sources might increase and disseminate knowledge among dentists. PMID:23382524

Smartphones and dental trauma: the current availability of apps for managing traumatic dental injuries.

Science.gov (United States)

Djemal, Serpil; Singh, Parmjit

2016-02-01

There is a general consensus regarding the lack of awareness regarding the emergency management of traumatic dental injuries amongst laypersons and dental professionals. This article aims to provide an overview of the apps available for traumatic dental injuries using smartphones. These apps may serve as a gateway for raising awareness of traumatic dental injuries. Three smartphone devices were used to access their respective app stores (Nokia Lumia 635 with Windows Phone OS 8.1; iPhone 5 with iOS 8.1; Samsung Galaxy Ace II with Android OS v2.3.6 Gingerbread). Nine phrases were searched: broken tooth/teeth; chipped tooth/teeth; dental emergency; dental injury; dental trauma; fractured tooth/teeth; knocked-out tooth/teeth; tooth/teeth injury; and tooth/teeth trauma. Seven apps for the Android and one app for the Apple operating system were relevant. The only Apple iOS app retrieved (Dental Trauma) was also found for the Android OS (Dental Trauma First Aid) and had the endorsement of the International Association of Dental Traumatology. AcciDent was the only app dedicated to traumatic dental injuries targeted solely towards dental professionals. Five other apps (Chipped Tooth Solution, Dental Crown Repair, Fixing Cracked Tooth, Repairing the Front Tooth and Solution to Broken Tooth) appeared to come from the same source (KBES). No traumatic dental injury apps were found for the Windows Phone OS. There are apps available for both patients and dentists that range in quality and on the whole lack real-life photographs. Future apps should continue to provide good quality, evidence-based and validated material. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Fixed orthodontic appliances in the management of severe dental trauma in mixed dentition: a case report.

Science.gov (United States)

Ebrahim, Fouad-Hassan; Kulkarni, Gajanan

2013-01-01

We describe a case of complex trauma to the early mixed dentition in which tooth avulsion, intrusion, extrusion and lateral luxation were managed effectively using a fixed, non-rigid orthodontic splint after treatment with a traditional wire-composite splint had failed. The use of orthodontic brackets and flexible wires provided several advantages, such as the ability to splint severely malpositioned teeth; easy assessment without removing the splint; slow, gentle repositioning of traumatized teeth; and gradual reestablishment of the arch form allowing for ease of future prosthodontic rehabilitation. Therefore, orthodontic appliances should be considered as a viable option for managing complex dental trauma.

The complete digital workflow in fixed prosthodontics: a systematic review.

Science.gov (United States)

Joda, Tim; Zarone, Fernando; Ferrari, Marco

2017-09-19

generation, allocation concealment, blinding, completeness of outcome data, selective reporting, and other bias using the Cochrane Collaboration tool. A judgment of risk of bias was assigned if one or more key domains had a high or unclear risk of bias. An official registration of the systematic review was not performed. The systematic search identified 67 titles, 32 abstracts thereof were screened, and subsequently, three full-texts included for data extraction. Analysed RCTs were heterogeneous without follow-up. One study demonstrated that fully digitally produced dental crowns revealed the feasibility of the process itself; however, the marginal precision was lower for lithium disilicate (LS2) restorations (113.8 μm) compared to conventional metal-ceramic (92.4 μm) and zirconium dioxide (ZrO2) crowns (68.5 μm) (p digital workflow was more than twofold faster (75.3 min) in comparison to the mixed analog-digital workflow (156.6 min) (p digital workflows in fixed prosthodontics is low. Scientifically proven recommendations for clinical routine cannot be given at this time. Research with high-quality trials seems to be slower than the industrial progress of available digital applications. Future research with well-designed RCTs including follow-up observation is compellingly necessary in the field of complete digital processing.

Reduction of metal artifact in three-dimensional computed tomography (3D CT) with dental impression materials.

Science.gov (United States)

Park, W S; Kim, K D; Shin, H K; Lee, S H

2007-01-01

Metal Artifact still remains one of the main drawbacks in craniofacial Three-Dimensional Computed Tomography (3D CT). In this study, we tried to test the efficacy of additional silicone dental impression materials as a "tooth shield" for the reduction of metal artifact caused by metal restorations and orthodontic appliances. 6 phantoms with 4 teeth were prepared for this in vitro study. Orthodontic bracket, bands and amalgam restorations were placed in each tooth to reproduce various intraoral conditions. Standardized silicone shields were fabricated and placed around the teeth. CT image acquisition was performed with and without silicone shields. Maximum value, mean, and standard deviation of Hounsfield Units (HU) were compared with the presence of silicone shields. In every situation, metal artifacts were reduced in quality and quantity when silicone shields are used. Amalgam restoration made most serious metal artifact. Silicone shields made by dental impression material might be effective way to reduce the metal artifact caused by dental restoration and orthodontic appliances. This will help more excellent 3D image from 3D CT in craniofacial area.

Clinical follow-up of unilateral, fixed dental prosthesis on maxillary implants.

Science.gov (United States)

Wahlström, Monica; Sagulin, Gun-Britt; Jansson, Leif E

2010-11-01

The aims of the present study were to evaluate (1) the success rate of unilateral maxillary fixed dental prosthesis (FDPs) on implants in patients at a periodontal clinic referred for periodontal treatment, (2) the prevalence of varying mechanical and biological complications and (3) effects of potential risk factors on the success rate. Fifty consecutive patients were invited to participate in a follow-up. The patients had received FDPs on implants between November 2000 and December 2003 after treatment to achieve optimal peridontal health, and the FDPs had been in function for at least 3 years. A questionnaire was sent to the patients before the follow-up examination. Forty-six patients with 116 implants were examined. The follow-up comprised clinical and radiographic examinations and evaluations of treatment outcome. Before implant treatment, 13% of the teeth were extracted; of these, 80% were extracted due to periodontal disease. No implants had been lost before implant loading. One implant in one patient fractured after 3 years of functional loading and three implants in another patient after 6.5 years. The most frequent mechanical complications were veneer fractures and loose bridge screws. Patients with peri-implant mucositis had significantly more bleeding on probing around teeth and implants. Patients with peri-implantitis at the follow-up had more deep periodontal pockets around their remaining teeth compared with individuals without peri-implantitis, but these differences were not significant. Smokers had significantly fewer teeth, more periodontal pockets ≥ 4mm and a tendency towards greater marginal bone loss at the follow-up, compared with non-smokers. In the short term, overloading and bruxism seem more hazardous for implant treatment, compared with a history of periodontitis.

Adhesives for fixed orthodontic bands.

Science.gov (United States)

Millett, Declan T; Glenny, Anne-Marie; Mattick, Rye Cr; Hickman, Joy; Mandall, Nicky A

2016-10-25

Orthodontic treatment involves using fixed or removable appliances (dental braces) to correct the positions of teeth. It has been shown that the quality of treatment result obtained with fixed appliances is much better than with removable appliances. Fixed appliances are, therefore, favoured by most orthodontists for treatment. The success of a fixed orthodontic appliance depends on the metal attachments (brackets and bands) being attached securely to the teeth so that they do not become loose during treatment. Brackets are usually attached to the front and side teeth, whereas bands (metal rings that go round the teeth) are more commonly used on the back teeth (molars). A number of adhesives are available to attach bands to teeth and it is important to understand which group of adhesives bond most reliably, as well as reducing or preventing dental decay during the treatment period. To evaluate the effectiveness of the adhesives used to attach bands to teeth during fixed appliance treatment, in terms of:(1) how often the bands come off during treatment; and(2) whether they protect the banded teeth against decay during fixed appliance treatment. The following electronic databases were searched: Cochrane Oral Health's Trials Register (searched 2 June 2016), Cochrane Central Register of Controlled Trials (CENTRAL; 2016, Issue 5) in the Cochrane Library (searched 2 June 2016), MEDLINE Ovid (1946 to 2 June 2016) and EMBASE Ovid (1980 to 2 June 2016). We searched ClinicalTrials.gov and the World Health Organization International Clinical Trials Registry Platform for ongoing trials. No restrictions were placed on the language or date of publication when searching the electronic databases. Randomised and controlled clinical trials (RCTs and CCTs) (including split-mouth studies) of adhesives used to attach orthodontic bands to molar teeth were selected. Patients with full arch fixed orthodontic appliance(s) who had bands attached to molars were included. All review authors

Standardizing Failure, Success, and Survival Decisions in Clinical Studies of Ceramic and Metal-Ceramic Fixed Dental Prostheses

Science.gov (United States)

Anusavice, Kenneth J.

2011-01-01

the effect of material properties and design factors on the time-dependent survival probability of ceramic fixed dental prostheses (FDPs). Based on the review of clinical trials and systematic reviews of these trials, the present study was designed to develop guidelines for classifying the functional performance, success, survival, and susceptibility to chipping fracture, and subsequent treatment of ceramic and metal-ceramic restorations. Objective To develop comprehensive descriptive guidelines and a clinical reporting form to assist dental scientists in their analyses of chipping fracture behavior of metal-ceramic and all-ceramic prostheses with particular emphasis on veneered-zirconia restorations. These guidelines are required to optimize the recording of fracture features that can be used to differentiate ceramic chipping fracture from bulk fracture and to assist dentists in identifying subsequent treatment that may minimize the need to replace affected restorations. A recording form for clinical fracture observations must be sufficiently clear and complete so that dental health professionals can translate the most relevant information in a context that allows their patients to fully understand the potential risks and benefits of treatment with ceramic restorations. It should clearly allow a clinician to determine whether or not a ceramic fracture constitutes a failure, which requires replacement of the prosthesis, or whether the fracture surface is relatively small or located in a nonfunctional area, i.e., one that is not contribute to occlusion, aesthetics, proximal contacts, or .food impaction. To accomplish this task, a review of the relevant publications of clinical trials was necessary to identify the variability in reporting of fracture events. The reviews were focused on clinical research studies of zirconia-based FDPs and PFM FDPs, which had been monitored through recall exams for three years or more. These reports and systematic reviews of all relevant

The analysis of cost-effectiveness of implant and conventional fixed dental prosthesis.

Science.gov (United States)

Chun, June Sang; Har, Alix; Lim, Hyun-Pil; Lim, Hoi-Jeong

2016-02-01

This study conducted an analysis of cost-effectiveness of the implant and conventional fixed dental prosthesis (CFDP) from a single treatment perspective. The Markov model for cost-effectiveness analysis of the implant and CFDP was carried out over maximum 50 years. The probabilistic sensitivity analysis was performed by the 10,000 Monte-Carlo simulations, and cost-effectiveness acceptability curves (CEAC) were also presented. The results from meta-analysis studies were used to determine the survival rates and complication rates of the implant and CFDP. Data regarding the cost of each treatment method were collected from University Dental Hospital and Statistics Korea for 2013. Using the results of the patient satisfaction survey study, quality-adjusted prosthesis year (QAPY) of the implant and CFDP strategy was evaluated with annual discount rate. When only the direct cost was considered, implants were more cost-effective when the willingness to pay (WTP) was more than 10,000 won at 10(th) year after the treatment, and more cost-effective regardless of the WTP from 20(th) year after the prosthodontic treatment. When the indirect cost was added to the direct cost, implants were more cost-effective only when the WTP was more than 75,000 won at the 10(th) year after the prosthodontic treatment, more than 35,000 won at the 20(th) year after prosthodontic treatment. The CFDP was more cost-effective unless the WTP was more than 75,000 won at the 10(th) year after prosthodontic treatment. But the cost-effectivenss tendency changed from CFDP to implant as time passed.

Disparities in dental health of rural Australians: hospitalisation rates and utilisation of public dental services in three communities in North Queensland.

Science.gov (United States)

Carlisle, Karen; Larkins, Sarah; Croker, Felicity

2017-01-01

The oral health of rural Australians continues to lag behind that of those living in metropolitan areas. Research has shown that people living in rural areas are more likely to suffer from dental caries (decay), visit the dentist less often and have poorer access to oral health services. The purpose of the study was to examine hospitalisations for dental conditions and utilisation of public dental services in three rural communities in Queensland compared with the whole of Queensland. Aggregated hospitalisation data for dental conditions and counts of public outpatient service data were requested for residents of three rural communities in Queensland and for the whole of Queensland for the calendar year 2013. Hospitalisation rates per 1000 and risk ratios were calculated to examine the risk of hospitalisation for dental procedures for those living in the selected rural communities and the rest of Queensland. Data were grouped by gender, age and Indigenous status and comparisons made between Queensland and the rural communities. Outpatient service data were converted to percentage of all services delivered to allow comparisons between groups of different sizes. Population data were grouped into age cohorts and compared with the proportion of public oral health services delivered to each age cohort. Residents of the rural communities were twice as likely to be hospitalised and children aged 0-14 years living in the communities were three times more likely to be hospitalised for dental conditions compared to residents of the rest of Queensland. Outpatient oral service data showed that the proportion of services delivered to children aged up to 14 years living in the rural communities was less than the whole of Queensland. Interestingly, in one rural community where the public dental service was open to all, the distribution of public oral health services aligned with the age distribution of the population. The study showed that residents of these rural communities

Development of Three-Dimensional Dental Scanning Apparatus Using Structured Illumination

OpenAIRE

Ahn, Jae Sung; Park, Anjin; Kim, Ju Wan; Lee, Byeong Ha; Eom, Joo Beom

2017-01-01

We demonstrated a three-dimensional (3D) dental scanning apparatus based on structured illumination. A liquid lens was used for tuning focus and a piezomotor stage was used for the shift of structured light. A simple algorithm, which detects intensity modulation, was used to perform optical sectioning with structured illumination. We reconstructed a 3D point cloud, which represents the 3D coordinates of the digitized surface of a dental gypsum cast by piling up sectioned images. We performed ...

Epidemiology of dental caries in children in the United Arab Emirates.

Science.gov (United States)

Al-Bluwi, Ghada S M

2014-08-01

Dental caries has a significant impact on the general health and development of children. Understanding caries epidemiology is an essential task for the United Arab Emirates (UAE) policymakers to evaluate preventive programmes and to improve oral health. The purpose of this review is to collect and summarise all data available in the published literature on the epidemiology of dental caries in the UAE in children aged under 13 years. This will provide dental health planners with a comprehensive data summary, which will help in the planning for and evaluation of dental caries prevention programmes. Data were collected from the various published studies in PubMed, Academic Search Complete, Google, and the reference lists in relevant articles. Four keywords were used in the search: 'dental caries,' 'epidemiology,' 'prevalence,' and 'UAE'. All studies conducted in the UAE in general or any single emirate that sheds light on the prevalence of dental caries of children under 13 years were included in this literature review. Studies on early childhood caries and factors associated with dental caries were also included. The review comprises 11 published surveys of childhood caries in UAE. The earliest study was published in 1991 and the most recent was published in 2011. The range of decayed, missing and filled primary teeth (dmft) in UAE children (age between 4 years and 6 years) was 5.1-8.4. For the 12-year-old group the decayed missing and filled permanent teeth (DMFT) ranged from 1.6 to 3.24. Baseline data on oral health and a good understanding of dental caries determinants are necessary for setting appropriate goals and planning for preventive oral health programmes. The current data available on the dmft and DMFT indicate that childhood dental caries is still a serious dental public health problem in the UAE that warrants immediate attention by the government and policy makers. © 2014 FDI World Dental Federation.

[Problems of dental services in closed administrative units assessed by a survey of dentists].

Science.gov (United States)

Ujba, V V; Olesova, V N; Khavkina, E Yu; Novozemtseva, T N; Shmakov, A N; Chuyanova, E Yu

2015-01-01

The article presents the results of the survey of 150 dentists from 10 closed administrative units of FMBA health care system of Russia in connection with the dynamics of dental staff withdrawal and reduce of volume of preventive work in schools and factories. These problems were found to be associated with the lack of regulations on mandatory preventive dental examinations of workers with occupational hazards, low tariffs for dental services in obligatory medical insurance program, poor wages an lack of apartments for young dentists.

[Technical complications rates and plaque control of fixed dental prostheses in patients treated for periodontal disease].

Science.gov (United States)

Xie, Yesi; Meng, Huanxin; Han, Jie; Pan, Shaoxia; Zhang, Li; Shi, Dong

2016-02-01

To compare the incidence of technical complications of implant-supported fixed dental prostheses in Chinese patients with a history of moderate or severe periodontitis and periodontally healthy patients(PHP) and analyze the effects of interproximal papillae patterns on food impaction and efficacy of plaque control. A total of 103 partially edentulous patients treated with implant-supported fixed dental prostheses between December 2009 and December 2012 for a minimum 1-year follow-up period were recruited from Department of Periodontology, Peking University, School and Hospital of Stomatology. Based on the initial periodontal examination, the participants were divided into three groups: 30 PHP, 36 moderate periodontally compromised patients(mPCP) and 37 severe periodontally compromised patients(sPCP). Implant survival/loss, technical complications, plaque index, papilla index, food impaction and degree of proximal contact tightness of each patient were assessed around the implants at follow-up. According to the implant papilla index, the implants were divided into two groups: the "filling" group with the mesial and distal aspects with papilla index=3 and the "no filling" group with at least one aspect with papilla indextechnical complications were analyzed. Comparisons of the incidence of technical complications were performed between the patients with different periodontal conditions with chi-square or Fisher's exact test. The influences of the interproximal papillae loss on food impaction and efficacy of plaque control were estimated with chi-square and Mann-Whitney U tests. The total implant survival rate was 100%(162/162) for all three groups. Technical complications were as following: veneer fractures(1.9%, 3/162), abutment screw loosening(1.9%, 3/162), prosthetic screw loosening(3.1%, 5/162) and decementation(3.1%, 5/162) in all subjects. No implant/screw fracture was noted. The incidence of technical complications in sPCP, mPCP and PHP did not yield

A new chemical formulation for control of dental unit water line contamination: An 'in vitro' and clinical 'study'

Directory of Open Access Journals (Sweden)

Dolci Giovanni

2002-02-01

Full Text Available Abstract Background Water delivered by dental units during routine dental practice is highly contaminated. The aim of this study is to evaluate the efficacy of a new chemical solution flushed through Dental Unit Water Lines (DUWL for the control of contamination inside dental units. Materials and methods Six old dental units equipped with a device designed to automatically flush disinfecting solutions through the water system (Castellini Autosteril were selected. Water samples from DUWL effluents were collected in each dental unit for 10 randomly selected days, before and after a 5 minute DUWL disinfecting cycle with TetraAcetylEthileneDiamine (TAED and persalt (Ster4spray produced by Farmec spa, and distributed by Castellini spa. Water samples were plated in R2A Agar and cultured at room temperature for 7 days, and the total number of heterotrophic microorganisms counted and expressed in Log10 CFU/mL A general linear model was fitted and multiple regression ANOVA for repeated measures was used for the statistical analysis. Results The mean contamination in DUWL effluent at baseline was 5.45 ± 0.35 CFU/mL (range 4.79 to 5.93 CFU/mL. When water samples were tested "in vitro" against the chemical, no growth of heterotrophic bacteria was detected after a 5 minute contact in any of the water samples tested. After undergoing a 5 minute disinfecting cycle with the chemical, DUWL mean contamination in water effluents was 2.01 ± 0.32 CFU/mL (range 1.30 to 2.74 CFU/mL (significant difference with respect to baseline. Conclusions An inbetween patient disinfecting procedure consisting of flushing DUWL with TAED and persalt equivalent to 0.26% peracetic acid could be useful in routine dental practice for cross-contamination control.

[Unit cost variation in a social security company in Querétaro, México].

Science.gov (United States)

Villarreal-Ríos, Enrique; Campos-Esparza, Maribel; Garza-Elizondo, María E; Martínez-González, Lidia; Núñez-Rocha, Georgina M; Romero-Islas, Nestor R

2006-01-01

Comparing unit cost variation between departments and reasons for consultation in outpatient health services provided by a social security company from Querétaro, Mexico. A study of costs (in US dollars) was carried out in outpatient health service units during 2004. Fixed unit costs were estimated per department and adjusted for one year's productivity. Material, physical and consumer resources were included. Weighting was assigned to resources invested in each department. Unit cost was estimated by using the micro cost technique; medicaments, materials used during treatment and reagents were considered to be consumer items. Unit cost resulted from adding fixed unit cost to the variable unit cost corresponding to the reason for consulting. Units costs were then compared between the medical units. Unit cost per month for diabetic treatment varied from 34.8 US dollars, 32,2 US dollars to US 34 US dollars, pap smear screening test costs were 7,2 US dollars, 8,7 US dollars and 7,3 US dollars and dental treatment 27 US dollars, 33 US dollars, 6 and 28,7 US dollars. Unit cost variation was more important in the emergency room and the dental service.

Veneered zirconia inlay-retained fixed dental prostheses: 10-Year results from a prospective clinical study.

Science.gov (United States)

Rathmann, Friederike; Bömicke, Wolfgang; Rammelsberg, Peter; Ohlmann, Brigitte

2017-09-01

The purpose of this study was to evaluate the 10-year clinical performance of zirconia-based inlay-retained fixed dental prostheses (IRFDP). For replacement of a molar in 27 patients, 30 IRFDP were luted by use of different cements, Panavia F (Kuraray Europe GmbH) or Multilink Automix (Ivoclar Vivadent GmbH), with use of inlay/inlay, inlay/full-crown, or inlay/partial-crown retainers for anchorage. Frameworks were milled from yttria-stabilized zirconia (IPS e.maxZirCAD; Ivoclar Vivadent GmbH) and fully veneered with pressable ceramic (IPS e.max ZirPress; Ivoclar Vivadent GmbH). Before luting, the IRFDP were silica-coated (Rocatec; 3M Espe) and silanized (Monobond S; Ivoclar Vivadent GmbH). Complications (for example, chipping or delamination of the veneering ceramic, debonding, secondary caries, endodontic treatment, and abutment tooth fracture) and failure were reported, by use of standardized report forms, 2 weeks, 6 months, and 1, 2, and 10 years after cementation. Statistical analysis included Kaplan-Meier survival and success (complication-free survival) and Cox regression analysis (α=0.05 for all). During the 10-year observation period, the complications most often observed were chipping of the veneer and debonding. Twenty-five restorations failed and one participant dropped out. Cumulative 10-year survival and success were 12.1% and 0%, respectively. The design of the retainer, use of a dental dam, choice of cement, and location in the dental arch had no statistically significant effect on the occurrence of complications. Use of fully veneered zirconia-based IRFDP with this technique cannot be recommended. A large incidence of complications and poor survival were observed for fully veneered zirconia-based IRFDP, revealing an urgent need for further design improvements for this type of restoration. This, again, emphasizes the need for testing of new restoration designs in clinical trials before implementation in general dental practice. Copyright © 2017

A 2-year report on maxillary and mandibular fixed partial dentures supported by Astra Tech dental implants. A comparison of 2 implants with different surface textures

DEFF Research Database (Denmark)

Karlsson, U; Gotfredsen, K; Olsson, C

1998-01-01

In 50 partially edentulous patients, 133 (48 maxillary; 85 mandibular) Astra Tech dental implants of 2 different surface textures (machined; TiO-blasted) were alternately installed, supporting 52 fixed partial dentures (FPDs). Before abutment connection 2 machined implants (1 mandibular; 1...

Three-level quality assessment of a dental hospital using EFQM.

Science.gov (United States)

Vakani, Farhan; Fatmi, Zafar; Naqvi, Kashif

2011-01-01

This article aims to measure quality by applying the European Foundation for Quality Management (EFQM) excellence model at three different participation levels, in a Karachi teaching university dental hospital. The case study assessed the eight EFQM model excellence concepts as benchmarks for providing quality services: results orientation; customer focus; leadership and constancy of purpose; management by processes and facts; people development and involvement; continuous learning, innovation and improvement; partnership development; and corporate social responsibility. This study was conducted at Hamdard University Dental Hospital (HUDH), located in Karachi - part of the largest privately-owned university in Pakistan. Data were collected through in-depth interviews with internal stakeholders at three levels (management, faculty and student). Continuous learning, innovation and improvement; partnership development; and corporate social responsibility were satisfactorily represented. The EFQM assessment was limited to a single university dental hospital, hence findings cannot be generalized. The article highlights that it is envisaged that this exercise will bring about a positive change in attitude and will stimulate institute staff to kick start the self assessment process and implement measures leading to better quality practices, thus establishing a continuous quality improvement cycle.

Lesbian, gay, bisexual, and transgender (LGBT) issues in dental school environments: dental student leaders' perceptions.

Science.gov (United States)

Anderson, Joan I; Patterson, April N; Temple, Henry J; Inglehart, Marita Rohr

2009-01-01

The objectives of the study reported in this article were to assess dental student leaders' perceptions of educational efforts concerning lesbian, gay, bisexual, and transgender (LGBT) topics and the cultural climate concerning LGBT issues in dental schools in the United States and Canada. In addition, the perceptions of student leaders who self-identified as belonging to the LGBT community and of students with a heterosexual orientation were compared. Data were collected from 113 dental student leaders from twenty-seven dental schools in the United States and three in Canada. Fifty student leaders were females, and sixty-two were males. Only 13.3 percent of the respondents agreed that their dental education prepared them well to treat patients from LGBT backgrounds. The more the student leaders believed that their university has an honest interest in diversity, the better they felt prepared by their dental school program to treat patients from LGBT backgrounds (r=.327; pschools' administrations create a positive environment for students with LGBT orientations, the more they agreed that persons can feel comfortable regardless of their sexual orientation (r=.585; pschool administrators play an important role in ensuring that future care providers are well prepared to treat patients from LGBT backgrounds and that staff, faculty, students, and patients from these backgrounds are not discriminated against.

Prevalence of dental fear and its causes using three measurement scales among children in New Delhi.

Science.gov (United States)

Rajwar, Anju Singh; Goswami, Mridula

2017-01-01

There is a great need for identifying fearful children, who often present problems in patient management, thus affecting the quality of dental care rendered to them. This study is unique in the way that dental fear was assessed through three fear scales as research has suggested the use of more than one scale because each scale has its own restrictions and is open to criticism. The aim of this study was to evaluate dental fear and anxiety (DFA) among children aged 3-14 years using three fear measurement scales. The study was conducted on children (3-14 years) who visited the Department of Pedodontics and Preventive Dentistry at Maulana Azad Institute of Dental Sciences, New Delhi. The DFA levels were measured using three fear measurement scales, i.e., facial image scale (FIS), dental fear scale (DFS), and children's fear survey schedule-dental subscale (CFSS-DS). The dental behavior was estimated using the Frankl's behavior rating scale (FBRS). The prevalence of dental fear according to FIS was 14.3%, according to DFS was 22.6%, and according to CFSS-DS was 7.4%. In assessment of the behavior of children in the clinics through FBRS, it was observed that he maximum number of respondents (69.8%) showed Frankl's Rating 3 i.e. positive. In the DFS and CFSS-DS, the factor which caused most fear was "feeling the needle injected" and "injections," respectively. Assessment of dental fear is an extremely useful tool for the dental practitioner, who can use it to customize the behavioral treatment and management for child patients.

Retrospective analysis of 56 edentulous dental arches restored with 344 single-stage implants using an immediate loading fixed provisional protocol: statistical predictors of implant failure.

Science.gov (United States)

Kinsel, Richard P; Liss, Mindy

2007-01-01

The purpose of this retrospective study was to evaluate the effects of implant dimensions, surface treatment, location in the dental arch, numbers of supporting implant abutments, surgical technique, and generally recognized risk factors on the survival of a series of single-stage Straumann dental implants placed into edentulous arches using an immediate loading protocol. Each patient received between 4 and 18 implants in one or both dental arches. Periapical radiographs were obtained over a 2- to 10-year follow-up period to evaluate crestal bone loss following insertion of the definitive metal-ceramic fixed prostheses. Univariate tests for failure rates as a function of age ( or = 60 years), gender, smoking, bone grafting, dental arch, surface type, anterior versus posterior, number of implants per arch, and surgical technique were made using Fisher exact tests. The Cochran-Armitage test for trend was used to evaluate the presence of a linear trend in failure rates regarding implant length and implant diameter. Logistic regression modeling was used to determine which, if any, of the aforementioned factors would predict patient and implant failure. A significance criterion of P = .05 was utilized. Data were collected for 344 single-stage implants placed into 56 edentulous arches (39 maxillae and 17 mandibles) of 43 patients and immediately loaded with a 1-piece provisional fixed prosthesis. A total of 16 implants failed to successfully integrate, for a survival rate of 95.3%. Increased rates of failure were associated with reduced implant length, placement in the posterior region of the jaw, increased implant diameter, and surface treatment. Implant length emerged as the sole significant predictor of implant failure. In this retrospective analysis of 56 consecutively treated edentulous arches with multiple single-stage dental implants loaded immediately, reduced implant length was the sole significant predictor of failure.

Fifteen-year survival of anterior all-ceramic cantilever resin-bonded fixed dental prostheses.

Science.gov (United States)

Kern, Matthias

2017-01-01

The aim of this follow-up study was to report the long-term outcome of all-ceramic cantilever resin-bonded fixed dental prostheses (RBFDPs). In 16 patients (mean age of 33.3±17.5years) 22 RBFDPs made from a glass-infiltrated alumina ceramic (In-Ceram) were inserted with a phosphate monomer containing luting agent after air-abrasion of the retainer wings. The abutment preparation included a shallow groove on the cingulum and a small proximal box. The restorations replacing 16 maxillary and 6 mandibular incisors were followed over a mean observation time of 188.7 months. No restoration debonded. Two RBFDPs fractured and were lost 48 and 214 months after insertion, respectively. The 10-year and 15-year survival rates were both 95.4% and dropped to 81.8% after 18 years. Anterior all-ceramic cantilever RBFDPs exhibited an excellent clinical longevity. Copyright © 2016 Elsevier Ltd. All rights reserved.

Zinc phosphate as a definitive cement for implant-supported crowns and fixed dentures

Directory of Open Access Journals (Sweden)

Flanagan D

2017-11-01

Full Text Available Dennis Flanagan Private Practice, Willimantic, CT, USA Abstract: Implant-supported dental prostheses can be retained by a screw or cement. Implant-supported fixed partial dentures have a passive fit. A passive fit means there is an internal gap between the abutment surface and the intaglio of the retainer to insure that there is no lateral pressure on the supporting implants or friction upon seating of the prosthesis. This gap is filled with cement for retention of the prosthesis. Any lateral pressure may cause marginal bone loss or periimplantitis. Also, there is usually a microscopic gap at the margin of a crown retainer that exposes the cement to oral fluids. The solubility of zinc phosphate (ZOP cement is a definite liability due to the risk for cement dissolution. In fixed prostheses, the dissolution of the cement of one or more retainers would cause a transfer of the occlusal load to the retained unit(s. The resulting rotation and lifting of the cement-retained implants from occlusal and parafunctional loads could cause loss of osseointegration of the abutment-retained implant(s. ZOP cement may not be indicated for implant-supported fixed partial dentures or splints. Cement dissolution in single unit probably only involves re-cementation, if the patient does not swallow or aspirate the crown. Keywords: passive fit, retention, film thickness, fixed, marginal gap 

Patients' Willingness to Participate in Rapid HIV Testing: A pilot study in three New York City dental hygiene clinics.

Science.gov (United States)

Davide, Susan H; Santella, Anthony J; Furnari, Winnie; Leuwaisee, Petal; Cortell, Marilyn; Krishnamachari, Bhuma

2017-12-01

Purpose: One in eight people living with an HIV infection in the United States is unaware of their status. Rapid HIV testing (RHT) is an easily used and accepted screening tool that has been introduced in a limited number of clinical settings. The purpose of this study was to investigate patient acceptability, certainty of their decision, and willingness to pay for screening if RHT was offered in university-based dental hygiene clinics. Methods: A cross-sectional survey was administered to 426 patients at three dental hygiene clinics in New York City over a period of four months. The survey questionnaire was based on the decisional conflict scale measuring personal perceptions; with zero indicating extremely high conflict to four indicating no conflict. Patients were assessed for their acceptance of RHT, provider preference for administration of the test and their willingness to pay for RHT. Results: Over half (72.2%) indicated acceptance of HIV testing in a dental hygiene clinic setting; with 85.3% choosing oral RHT, 4.9% fingerstick RHT, and 8.8% venipuncture. Respondents were amenable to testing when offered by dental hygienists (71.7%) and dentists (72.4%). Over 30% indicated their willingness to receive HIV testing in the dental setting when offered at no additional cost. The mean decisional conflict score was 3.42/4.0 indicating no decisional conflict. Conclusions: Patients are willing to undergo oral RHT when offered as a service and provided by dental hygienists in the dental setting. Patients appear to be aware of the benefits and risks associated with RHT. Further research is needed to evaluate the public health benefits and logistical challenges facing the delivery of RHT within in the dental setting. Copyright © 2017 The American Dental Hygienists’ Association.

Prevalence of dental fear and its causes using three measurement scales among children in New Delhi

Directory of Open Access Journals (Sweden)

Anju Singh Rajwar

2017-01-01

Full Text Available Introduction: There is a great need for identifying fearful children, who often present problems in patient management, thus affecting the quality of dental care rendered to them. This study is unique in the way that dental fear was assessed through three fear scales as research has suggested the use of more than one scale because each scale has its own restrictions and is open to criticism. Aim: The aim of this study was to evaluate dental fear and anxiety (DFA among children aged 3–14 years using three fear measurement scales. Methods: The study was conducted on children (3–14 years who visited the Department of Pedodontics and Preventive Dentistry at Maulana Azad Institute of Dental Sciences, New Delhi. The DFA levels were measured using three fear measurement scales, i.e., facial image scale (FIS, dental fear scale (DFS, and children's fear survey schedule-dental subscale (CFSS-DS. The dental behavior was estimated using the Frankl's behavior rating scale (FBRS. Results: The prevalence of dental fear according to FIS was 14.3%, according to DFS was 22.6%, and according to CFSS-DS was 7.4%. In assessment of the behavior of children in the clinics through FBRS, it was observed that he maximum number of respondents (69.8% showed Frankl's Rating 3 i.e. positive. In the DFS and CFSS-DS, the factor which caused most fear was “feeling the needle injected” and “injections,” respectively. Conclusion: Assessment of dental fear is an extremely useful tool for the dental practitioner, who can use it to customize the behavioral treatment and management for child patients.

Three-Year Outcome of Fixed Partial Rehabilitations Supported by Implants Inserted with Flap or Flapless Surgical Techniques.

Science.gov (United States)

Maló, Paulo; de Araújo Nobre, Miguel; Lopes, Armando

2016-07-01

The aim of this prospective clinical study was to evaluate the 3-year outcome of fixed partial prostheses supported by implants with immediate provisionalization without occlusal contacts inserted in predominantly soft bone with flap and flapless protocols. Forty-one patients partially rehabilitated with 72 NobelSpeedy implants (51 maxillary; 21 mandibular) were consecutively included and treated with a flapless surgical protocol (n = 20 patients; 32 implants) and flapped surgical protocol (n = 21 patients; 40 implants). Primary outcome measure was implant survival; secondary outcome measures were marginal bone resorption (comparing the bone levels at 1 and 3 years with baseline) and the incidence of biological, mechanical, and esthetic complications. Survival was computed through life tables; descriptive statistics were applied to the remaining variables of interest. Eight patients with eight implants dropped out of the study. One implant failed in one patient (flapless group) giving an overall cumulative survival rate (CSR) of 98.6%. No failures were noted with the flapped protocol (CSR 100%), while for the implants placed with the flapless surgical technique, a 96.9% CSR was registered. The overall average marginal bone resorption at 3 years was 1.37 mm (SD = 0.94 mm), with 1.14 mm (SD = 0.49 mm) and 1.60 mm (SD = 1.22 mm) for the flap and flapless groups, respectively. Mechanical complications occurred in nine patients (n = 5 patients in the flapless group; n = 4 patients in the flap group). Implant infection was registered in three implants and three patients (flapless group), who exhibited inadequate oral hygiene levels. Partial edentulism rehabilitation through immediate provisionalization fixed prosthesis supported by dental implants inserted through flap or flapless surgical techniques in areas of predominantly soft bone was viable at 3 years of follow-up. The limitations and risks of the "free-hand" method in flapless surgery should be considered when

Computational biomechanics of bone's responses to dental prostheses - osseointegration, remodeling and resorption

International Nuclear Information System (INIS)

Li Wei; Rungsiyakull, Chaiy; Field, Clarice; Lin, Daniel; Zhang Leo; Li Qing; Swain, Michael

2010-01-01

Clinical and experimental studies showed that human bone has the ability to remodel itself to better adapt to its biomechanical environment by changing both its material properties and geometry. As a consequence of the rapid development and extensive applications of major dental restorations such as implantation and fixed partial denture (FPD), the effect of bone remodeling on the success of a dental restorative surgery is becoming critical for prosthetic design and pre-surgical assessment. This paper aims to provide a computational biomechanics framework to address dental bone's responses as a result of dental restoration. It explored three important issues of resorption, apposition and osseointegration in terms of remodeling simulation. The published remodeling data in long bones were regulated to drive the computational remodeling prediction for the dental bones by correlating the results to clinical data. It is anticipated that the study will provide a more predictive model of dental bone response and help develop a new design methodology for patient-specific dental prosthetic restoration.

The prevalence of dental erosion in 5-year-old preschoolers in Sharjah, United Arab Emirates.

Science.gov (United States)

Gopinath, Vellore Kannan

2016-01-01

The aim of this study was to determine the percentage of 5-year-old preschoolers in Sharjah, affected by dental erosion and to assess the predictors. A total of 403 5-year-old children were examined of which 48.14% (n = 194) were boys and 51.86% (n = 209) were girls; 31.27% (n = 126) were Emirati and 68.73% (n = 277) were non-Emirati Arabs. Examination of dental erosion was confined to palatal surfaces of maxillary incisors using the erosion index described in the UK National Survey of Children's Dental Health, 1993. Dental caries was charted using the World Health Organization 1997 criteria. In the sample of 403 5-year-old preschoolers examined, dental erosion was apparent in 237 (58.80%) children, with 55.09% showing the dissolution of enamel and 3.72% exhibiting exposed dentin. Predictors of dental erosion as determined by logistic regression concluded that compared to Emirati citizens other Arab nationalities have 0.27 times the odds (95% confidence interval [CI] =0.18-0.42) of having tooth erosion (P United Arab Emirates, were affected by dental erosion. Caries experience and consumption of acidic drinks were associated with dental erosion.

Distortion of CAD-CAM-fabricated implant-fixed titanium and zirconia complete dental prosthesis frameworks.

Science.gov (United States)

Al-Meraikhi, Hadi; Yilmaz, Burak; McGlumphy, Edwin; Brantley, William A; Johnston, William M

2018-01-01

Computer-aided design and computer-aided manufacturing (CAD-CAM)-fabricated titanium and zirconia implant-supported fixed dental prostheses have become increasingly popular for restoring patients with complete edentulism. However, the distortion level of these frameworks is not well known. The purpose of this in vitro study was to compare the 3-dimensional (3D) distortion of CAD-CAM zirconia and titanium implant-fixed screw-retained complete dental prostheses. A master edentulous model with 4 implants at the positions of the maxillary first molars and canines was used. Multiunit abutments (Nobel Biocare) secured to the model were digitally scanned using scan bodies and a laboratory scanner (S600 ARTI; Zirkonzahn). Titanium (n=5) and zirconia (n=5) frameworks were milled using a CAD-CAM system (Zirkonzahn M1; Zirkonzahn). All frameworks were scanned using an industrial computed tomography (CT) scanner (Nikon/X-Tek XT H 225kV MCT Micro-Focus). The direct CT scans were reconstructed to generate standard tessellation language (STL) files. To calculate the 3D distortion of the frameworks, STL files of the CT scans were aligned to the CAD model using a sum of the least squares best-fit algorithm. Surface comparison points were placed on the CAD model on the midfacial aspect of all teeth. The 3D distortion of each direct scan to the CAD model was calculated. In addition, color maps of the scan-to-CAD comparison were constructed using a ±0.500 mm color scale range. Both materials exhibited distortion; however, no significant difference was found in the amount of distortion from the CAD model between the materials (P=.747). Absolute values of deviations from the CAD model were evident in the x and y plane and less so in the z direction. Zirconia and titanium frameworks showed similar 3D distortion compared with the CAD model for the tested CAD-CAM and implant systems. The distortion was more pronounced in the horizontal and sagittal plane than in the vertical plane

Workplace Determinants of Endotoxin Exposure in Dental Healthcare Facilities in South Africa

Science.gov (United States)

Singh, Tanusha S.; Bello, Braimoh; Mabe, Onnicah D.; Renton, Kevin; Jeebhay, Mohamed F.

2010-01-01

Objectives: Aerosols generated during dental procedures have been reported to contain endotoxin as a result of bacterial contamination of dental unit water lines. This study investigated the determinants of airborne endotoxin exposure in dental healthcare settings. Methods: The study population included dental personnel (n = 454) from five academic dental institutions in South Africa. Personal air samples (n = 413) in various dental jobs and water samples (n = 403) from dental handpieces and basin taps were collected. The chromogenic-1000 limulus amebocyte lysate assay was used to determine endotoxin levels. Exposure metrics were developed on the basis of individually measured exposures and average levels within each job category. Analysis of variance and multivariate linear regression models were constructed to ascertain the determinants of exposure in the dental group. Results: There was a 2-fold variation in personal airborne endotoxin from the least exposed (administration) to the most exposed (laboratory) jobs (geometric mean levels: 2.38 versus 5.63 EU m−3). Three percent of personal samples were above DECOS recommended exposure limit (50 EU m−3). In the univariate linear models, the age of the dental units explained the most variability observed in the personal air samples (R2 = 0.20, P < 0.001), followed by the season of the year (R2 = 0.11, P < 0.001). Other variables such as institution and total number of dental units per institution also explained a modest degree of variability. A multivariate model explaining the greatest variability (adjusted R2 = 0.40, P < 0.001) included: the age of institution buildings, total number of dental units per institution, ambient temperature, ambient air velocity, endotoxin levels in water, job category (staff versus students), dental unit model type and age of dental unit. Conclusions: Apart from job type, dental unit characteristics are important predictors of airborne endotoxin

Two- and three-dimensional accuracy of dental impression materials: effects of storage time and moisture contamination.

Science.gov (United States)

Chandran, Deepa T; Jagger, Daryll C; Jagger, Robert G; Barbour, Michele E

2010-01-01

Dental impression materials are used to create an inverse replica of the dental hard and soft tissues, and are used in processes such as the fabrication of crowns and bridges. The accuracy and dimensional stability of impression materials are of paramount importance to the accuracy of fit of the resultant prosthesis. Conventional methods for assessing the dimensional stability of impression materials are two-dimensional (2D), and assess shrinkage or expansion between selected fixed points on the impression. In this study, dimensional changes in four impression materials were assessed using an established 2D and an experimental three-dimensional (3D) technique. The former involved measurement of the distance between reference points on the impression; the latter a contact scanning method for producing a computer map of the impression surface showing localised expansion, contraction and warpage. Dimensional changes were assessed as a function of storage times and moisture contamination comparable to that found in clinical situations. It was evident that dimensional changes observed using the 3D technique were not always apparent using the 2D technique, and that the former offers certain advantages in terms of assessing dimensional accuracy and predictability of impression methods. There are, however, drawbacks associated with 3D techniques such as the more time-consuming nature of the data acquisition and difficulty in statistically analysing the data.

Three-dimensional dental arch changes of patients submitted to orthodontic-surgical treatment for correction of Class II malocclusion

OpenAIRE

Peixoto,Adriano Porto; Pinto,Ary dos Santos; Garib,Daniela Gamba; Gonçalves,João Roberto

2014-01-01

INTRODUCTION: This study assessed the three-dimensional changes in the dental arch of patients submitted to orthodontic-surgical treatment for correction of Class II malocclusions at three different periods. METHODS: Landmarks previously identified on upper and lower dental casts were digitized on a three-dimensional digitizer MicroScribe-3DX and stored in Excel worksheets in order to assess the width, length and depth of patient's dental arches. RESULTS: During orthodontic preparation, the m...

Dental unit water lines decontamination with the aid of nanotechnology.

Science.gov (United States)

Paramashivaiah, Rashmi; Prabhuji, M L V; Narayanan, Roopalakshmi

2016-01-01

This article reviews the issue of dental unit waterline (DUWL) contamination which affects all the clinical and hospital settings. The contaminating microorganisms commonly isolated from these settings and the most pathogenic among them have serious consequences. Over the years several measures are inculcated for decontamination of water, their advantages and shortcomings have been addressed. Options using nanotechnology which are available in the market are described briefly. A manual and electronic search was conducted. Google and PubMed were searched for relevant material from studies up to 2013. Medical Subject Headings words looked for were "Nanotechnology," "Water purification," and "Biofilms." Reviewed findings were summarized by topic, using the Preferred Reporting Items for Systematic Reviews and Meta-analyses statement for reporting. Seventy articles were shortlisted for articles pertaining to our topic of discussion. A systematic approach was followed by two independent reviewers and included eligibility criteria for study inclusion, data extraction, data synthesis, and drawing of conclusion. Dental waterline contamination is widespread in any type of dental setting having serious implications on clinicians and patients alike, especially elderly and immune-compromised. Hence, international bodies like center for disease and control and American Dental Association have come up with stringent measures for maintenance of water quality. A gamut of procedures has been tried to overcome this problem ranging from chlorinated products, water filters to the usage of distilled water. The use of nanoemulsions, nanofilters, nanomembranes, etc., and their applicability for routine usage is discussed. Biofilm formation in DUWLs is inevitable with the subsequent release of part of microbiota into the otherwise sterile dental settings. These consequences can be quite serious on clinicians and dental patients. Though conventional measures in water decontamination have

Patient characteristics and trends in nontraumatic dental condition visits to emergency departments in the United States

Directory of Open Access Journals (Sweden)

Xiang Q

2012-01-01

Full Text Available Christopher Okunseri1, Elaye Okunseri1, Joshua M Thorpe2, Qun Xiang3, Aniko Szabo31Department of Clinical Services, Marquette University School of Dentistry, Milwaukee, WI, 2Division of Social and Administrative Sciences, University of Wisconsin, Madison School of Pharmacy, Madison WI, 3Division of Biostatistics, Department of Population Health, Medical College of Wisconsin, Milwaukee, WI, USAObjective: We examined trends and patient characteristics for non-traumatic dental condition (NTDC visits to emergency departments (EDs, and compared them to other ED visit types, specifically non-dental ambulatory care sensitive conditions (non-dental ACSCs and non-ambulatory care sensitive conditions (non-ACSCs in the United States.Methods: We analyzed data from the National Hospital Ambulatory Medical Care survey (NHAMCS for 1997 to 2007. We performed descriptive statistics and used a multivariate multinomial logistic regression to examine the odds of one of the three visit types occurring at an ED. All analyses were adjusted for the survey design.Results: NTDC visits accounted for 1.4% of all ED visits with a 4% annual rate of increase (from 1.0% in 1997 to 1.7% in 2007. Self-pay patients (32% and Medicaid enrollees (27% were over-represented among NTDC visits compared to non-dental ACSC and non-ACSC visits (P < 0.0001. Females consistently accounted for over 50% of all types of ED visits examined. Compared to whites, Hispanics had significantly lower odds of an NDTC visit versus other visit types (P < 0.0001. Blacks had significantly lower odds of making NDTC visits when compared to non-dental ACSC visits only (P < 0.0001. Compared to private insurance enrollees, Medicaid and self-pay patients had 2–3 times the odds of making NTDC visits compared to other visit types.Conclusion: Nationally, NTDC visits to emergency departments increased over time. Medicaid and self-pay patients had significantly higher odds of making NDTC visits.Keywords: emergency

Dental unit water lines decontamination with the aid of nanotechnology

OpenAIRE

Rashmi Paramashivaiah; M.L.V. Prabhuji; Roopalakshmi Narayanan

2016-01-01

Aim: This article reviews the issue of dental unit waterline (DUWL) contamination which affects all the clinical and hospital settings. The contaminating microorganisms commonly isolated from these settings and the most pathogenic among them have serious consequences. Over the years several measures are inculcated for decontamination of water, their advantages and shortcomings have been addressed. Options using nanotechnology which are available in the market are described briefly. Materi...

Parallelized Bayesian inversion for three-dimensional dental X-ray imaging.

Science.gov (United States)

Kolehmainen, Ville; Vanne, Antti; Siltanen, Samuli; Järvenpää, Seppo; Kaipio, Jari P; Lassas, Matti; Kalke, Martti

2006-02-01

Diagnostic and operational tasks based on dental radiology often require three-dimensional (3-D) information that is not available in a single X-ray projection image. Comprehensive 3-D information about tissues can be obtained by computerized tomography (CT) imaging. However, in dental imaging a conventional CT scan may not be available or practical because of high radiation dose, low-resolution or the cost of the CT scanner equipment. In this paper, we consider a novel type of 3-D imaging modality for dental radiology. We consider situations in which projection images of the teeth are taken from a few sparsely distributed projection directions using the dentist's regular (digital) X-ray equipment and the 3-D X-ray attenuation function is reconstructed. A complication in these experiments is that the reconstruction of the 3-D structure based on a few projection images becomes an ill-posed inverse problem. Bayesian inversion is a well suited framework for reconstruction from such incomplete data. In Bayesian inversion, the ill-posed reconstruction problem is formulated in a well-posed probabilistic form in which a priori information is used to compensate for the incomplete information of the projection data. In this paper we propose a Bayesian method for 3-D reconstruction in dental radiology. The method is partially based on Kolehmainen et al. 2003. The prior model for dental structures consist of a weighted l1 and total variation (TV)-prior together with the positivity prior. The inverse problem is stated as finding the maximum a posteriori (MAP) estimate. To make the 3-D reconstruction computationally feasible, a parallelized version of an optimization algorithm is implemented for a Beowulf cluster computer. The method is tested with projection data from dental specimens and patient data. Tomosynthetic reconstructions are given as reference for the proposed method.

Special Needs Dentistry: Interdisciplinary Management of Medically-Complex Patients at Hospital-Based Dental Units in Tasmania, Australia

Directory of Open Access Journals (Sweden)

Lim

2017-06-01

Full Text Available Background: Increasing awareness of the interactions between oral and general health has led to the establishment of Special Needs Dentistry as a dental specialty in many countries. This specialty assists with the interdisciplinary management of patients between the medical and dental professions particularly those with complex medical problems, intellectual and physical impairments, and psychiatric conditions that may affect their oral health or the manner in which they receive treatment. However, little is known about the utilisation of specialised services provided to facilitate individuals with these needs. Aim: The aim of this study was to understand current utilisation of hospital-based dental services established to provide medically-necessary dental care. Methods: A retrospective review of the demographics and medical status of patients treated at referral hospital-based dental clinics in the state of Tasmania was completed for the month of August 2015. Results: Patients treated at these units had a variety of medical backgrounds. Most (46.4% were referred from medical professionals within the hospital. On average, patients treated at these units had 2.56 medical conditions and were taking 3.59 medications each. Many of these were chronic medical conditions known to have an interaction with oral health. Conclusions: Our results demonstrate the growing recognition of dynamic interactions between oral and general health and the importance of these hospitalbased units and interprofessional relationships in providing timely and holistic health care to these patients.

Impact of Bruxism on Ceramic Defects in Implant-Borne Fixed Dental Prostheses: A Retrospective Study.

Science.gov (United States)

Mikeli, Aikaterini; Walter, Michael H

2016-01-01

Ceramic veneer fracture is a frequent complication in implant-borne fixed restorations. The retrospective clinical study assesses the effect of bruxism on this complication. A sample of 507 implant-borne fixed units inserted between 1995 and 2011 in 144 patients were examined. Any detected veneer fractures were assigned to one of four groups according to extent and position. A hypothetical correlation between bruxism and ceramic veneer fractures was examined. Of 34 patients (23.6%) with at least one ceramic veneer fracture, 24 were bruxers (70%) and 10 were nonbruxers (30%) (P = .002). Bruxism may pose a risk for ceramic fractures.

Randomized clinical trial of implant-supported ceramic-ceramic and metal-ceramic fixed dental prostheses: preliminary results.

Science.gov (United States)

Esquivel-Upshaw, Josephine F; Clark, Arthur E; Shuster, Jonathan J; Anusavice, Kenneth J

2014-02-01

The aim of this study was to determine the survival rates over time of implant-supported ceramic-ceramic and metal-ceramic prostheses as a function of core-veneer thickness ratio, gingival connector embrasure design, and connector height. An IRB-approved, randomized, controlled clinical trial was conducted as a single-blind pilot study involving 55 patients missing three teeth in either one or two posterior areas. These patients (34 women; 21 men; age range 52-75 years) were recruited for the study to receive a three-unit implant-supported fixed dental prosthesis (FDP). Two implants were placed for each of the 72 FDPs in the study. The implants (Osseospeed, Astra Tech), which were made of titanium, were grit blasted. A gold-shaded, custom-milled titanium abutment (Atlantis, Astra Tech), was secured to each implant body. Each of the 72 FDPs in 55 patients were randomly assigned based on one of the following options: (1) A. ceramic-ceramic (Yttria-stabilized zirconia core, pressable fluorapatite glass-ceramic, IPS e.max ZirCAD, and ZirPress, Ivoclar Vivadent) B. metal-ceramic (palladium-based noble alloy, Capricorn, Ivoclar Vivadent, with press-on leucite-reinforced glass-ceramic veneer, IPS InLine POM, Ivoclar Vivadent); (2) occlusal veneer thickness (0.5, 1.0, and 1.5 mm); (3) curvature of gingival embrasure (0.25, 0.5, and 0.75 mm diameter); and (4) connector height (3, 4, and 5 mm). FDPs were fabricated and cemented with dual-cure resin cement (RelyX, Universal Cement, 3M ESPE). Patients were recalled at 6 months, 1 year, and 2 years. FDPs were examined for cracks, fracture, and general surface quality. Recall exams of 72 prostheses revealed 10 chipping fractures. No fractures occurred within the connector or embrasure areas. Two-sided Fisher's exact tests showed no significant correlation between fractures and type of material system (p = 0.51), veneer thickness (p = 0.75), radius of curvature of gingival embrasure (p = 0.68), and connector height (p = 0

Quality improvement program reduces perioperative dental injuries - A review of 64,718 anesthetic patients.

Science.gov (United States)

Kuo, Yi-Wei; Lu, I-Cheng; Yang, Hui-Ying; Chiu, Shun-Li; Hsu, Hung-Te; Cheng, Kuang-I

2016-12-01

Perioperative dental injury (PDI) is a common adverse event associated with anesthesia that can easily lead to medicolegal litigation. A quality improvement program was conducted with the electronic, standardized dental chart to document dentition before anesthesia and dentist consultation when necessary. This study aimed to reduce PDIs through execution of a quality improvement program. We reviewed the 42-month interval anesthetic records of 64,718 patients who underwent anesthesia. A standardized electronic dental chart was designed to identify any dental prosthetics, fixed and removable dentures, and degree of loose teeth. The incidence of dental injuries associated with anesthesia was separated into three time periods: baseline, initiative (Phase I), and execution (Phase II). Primary outcome measurement was the incidence of PDIs related to anesthesia. The overall incidence of dental injury related to anesthesia was 0.059% (38/64,718 patients). During the baseline period, the dental injury rate was 0.108% (26/24,137 patients), and it decreased from 0.051% in the initiative period (10/19,711 patients) to 0.009% in the execution period (2/20,870 patients) during implementation of the quality improvement program. Most dental injuries were associated with laryngeal mask airway (42.1%) and laryngoscopy (28.9%). The most commonly involved teeth were the upper incisors. Dental injury incidence was significantly reduced and remained at low levels after implementation of the quality improvement program. We suggest the implementation of a standardized dental examination into the preoperative evaluation system adding pathologic teeth fixed or protected devices to minimize dental injury associated with anesthesia. Copyright © 2016. Published by Elsevier Taiwan LLC.

Oral Hygiene and Gingival Health in Patients with Fixed Prosthodontic Appliances - A Six Month Follow-up.

Science.gov (United States)

Kc Basnyat, S; Sapkota, B; Shrestha, S

2015-01-01

Background Gingival inflammation and periodontal disease are the common complications of fixed dental prosthesis. They can be overcome by good oral hygiene maintenance. Objective The objective of this study was to assess the oral hygiene and gingival condition in patients after placement of fixed dental prosthesis for a period of six months. It was also analyzed how factors like type of fixed dental prosthesis (Single crown, fixed partial denture) and material (Metal, Porcelain fused to metal) are statistically associated with oral hygiene and gingival health. Method The sample consisted of 50 patients visiting the Dental Outpatient Department of Dhulikhel Hospital. The oral examinations were conducted using basic diagnostic tools (Mouth mirror, periodontal probe and explorer). Teeth and gingiva were examined using the Plaque and Gingiva Index by Silness and Löe. The examinations were conducted after 14 days and six months after placement of fixed dental prosthesis along with the oral hygiene instructions. Paired sample t-test were done to find statistical association using SPSS 16.0. Result Our results revealed no significant difference in plaque index among patients with single crown whereas fixed partial denture showed statistical significance. No significant differences were found for type of material. The statistical analysis showed similar results for gingival index. Conclusion Our research showed that single crown had no significant difference on Plaque index and Gingival index of the patient after 14 days and six months, whereas, Fixed partial denture showed significant difference. Both metal and porcelain fused to metal crown revealed no statistically significant difference on Plaque index and Gingival index.

Mobile dental operations: capital budgeting and long-term viability.

Science.gov (United States)

Arevalo, Oscar; Chattopadhyay, Amit; Lester, Harold; Skelton, Judy

2010-01-01

The University of Kentucky College of Dentistry (UKCD) runs a large mobile dental operation. Economic conditions dictate that as the mobile units age it will be harder to find donors willing or able to provide the financial resources for asset replacement. In order to maintain current levels of access for the underserved, consideration of replacement is paramount. A financial analysis for a new mobile unit was conducted to determine self-sustainability, return on investment (ROI), and feasibility of generating a cash reserve for its replacement in 12 years. Information on clinical income, operational and replacement costs, and capital costs was collected. A capital budgeting analysis (CBA) was conducted using the Net Present Value (NPV) methodology in four different scenarios. Depreciation funding was calculated by transferring funds from cash inflows and reinvested to offset depreciation at fixed compound interest. A positive ROI was obtained for two scenarios. He depreciation fund did not generate a cash reserve sufficient to replace the mobile unit. Mobile dental programs can play a vital role in providing access to care to underserved populations and ensuring their mission requires long-term planning. Careful financial viability and CBA based on sound assumptions are excellent decision-making tools.

Cellular effects of halogen blue light from dental curing unit

International Nuclear Information System (INIS)

Trosic, I.; Pavicic, I.; Jukic, S.

2008-01-01

Full text: Halogen curing lights are the most frequently used polymerization source in dental offices. Light-cured bonding systems have become increasingly popular among clinicians because they offer a number of advantages over self-cured adhesives. The effort to increase polymerization quality releases the commercially available high power light density dental curing units. Emitted visible blue light belongs to the range of nonionizing radiation. Common concern in both, patients and dentist grows with regard to the unfavorable effects on the pulp tissue. The aim of study was to evaluate the time and dose dependence effect of halogen light curing unit (Elipar TriLight, ESPE Dental AG, Germany) at the disposed condition modes in vitro. A quartz-tungsten-halogen light source emits radiation of the wavelengths between 400 and 515 nm. This halogen blue light source operates in the three illumination modes, medium (M), exponential (E) and standard (S), and five illumination times. The total irradiance or the light intensity was measured by the light intensity control area on the control panel of device and mean light intensity given by manufacturer was 800 m W/cm 2 . Continuous culture of V79 cells was illuminated in triplicate. The influence of medium mode (M), exponential (E) and standard (S) illumination during 20, 40 and 80 sec on the cell viability, colony forming ability and proliferation of V79 cell culture was investigated. Trypan blue exclusion test was used to determine cell viability, both, in the treated and control cell samples. Colony forming ability was assessed for each exposure time and mode by colony count on post-exposure day 7. Cell proliferation was determined by cell counts for each time and mode of exposure during five post-exposure days. Statistical difference were determined at p<0.05 (Statistica 7.0, StatSoft Inc., USA). Viability of cells was not affected by blue light in view of exposure time and modes. Regardless to exposure or illumination

New layer-based imaging and rapid prototyping techniques for computer-aided design and manufacture of custom dental restoration.

Science.gov (United States)

Lee, M-Y; Chang, C-C; Ku, Y C

2008-01-01

Fixed dental restoration by conventional methods greatly relies on the skill and experience of the dental technician. The quality and accuracy of the final product depends mostly on the technician's subjective judgment. In addition, the traditional manual operation involves many complex procedures, and is a time-consuming and labour-intensive job. Most importantly, no quantitative design and manufacturing information is preserved for future retrieval. In this paper, a new device for scanning the dental profile and reconstructing 3D digital information of a dental model based on a layer-based imaging technique, called abrasive computer tomography (ACT) was designed in-house and proposed for the design of custom dental restoration. The fixed partial dental restoration was then produced by rapid prototyping (RP) and computer numerical control (CNC) machining methods based on the ACT scanned digital information. A force feedback sculptor (FreeForm system, Sensible Technologies, Inc., Cambridge MA, USA), which comprises 3D Touch technology, was applied to modify the morphology and design of the fixed dental restoration. In addition, a comparison of conventional manual operation and digital manufacture using both RP and CNC machining technologies for fixed dental restoration production is presented. Finally, a digital custom fixed restoration manufacturing protocol integrating proposed layer-based dental profile scanning, computer-aided design, 3D force feedback feature modification and advanced fixed restoration manufacturing techniques is illustrated. The proposed method provides solid evidence that computer-aided design and manufacturing technologies may become a new avenue for custom-made fixed restoration design, analysis, and production in the 21st century.

Atypical Case of Three Dental Implants Displaced into the Maxillary Sinus

Directory of Open Access Journals (Sweden)

João Felipe Bonatto Bruniera

2015-01-01

Full Text Available Oral rehabilitation with dental implants has become a routine treatment in contemporary dentistry. The displacement of dental implants into the sinus membrane, a complication related to the maxillary sinus, is one of the most common accidents reported in the literature. The treatment for this complication is the surgical removal of the implant. A 60-year-old woman with three dental implants displaced into the maxillary sinus (one implant displaced into the left maxillary sinus and two implants displaced into the right maxillary sinus underwent surgery for removal of the implants. The surgery to remove the implants was performed under local anesthesia through the Caldwell-Luc technique. The patient was subsequently administered antibiotic, anti-inflammatory, and analgesic drugs. The patient returned 7 days after the surgery for suture removal and is being regularly monitored to determine whether future rehabilitation of the edentulous area is necessary. In conclusion, surgical removal of the dental implant displaced into the maxillary sinus is the treatment of choice. This technique is appropriate because it allows the use of local anesthesia and provides direct visualization for the removal of the implants.

Three-body scattering problem in the fixed center approximation: The case of attraction

Energy Technology Data Exchange (ETDEWEB)

Kudryavtsev, Alexander E. [National Research Center Kurchatov Institute, Institute for Theoretical and Experimental Physics, Moscow (Russian Federation); Gani, Vakhid A. [National Research Center Kurchatov Institute, Institute for Theoretical and Experimental Physics, Moscow (Russian Federation); National Research Nuclear University MEPhI (Moscow Engineering Physics Institute), Moscow (Russian Federation); Romanov, Alexander I. [National Research Nuclear University MEPhI (Moscow Engineering Physics Institute), Moscow (Russian Federation)

2016-12-15

We study the scattering of a light particle on a bound pair of heavy particles (e.g., the deuteron) within the fixed center approximation in the case of light-heavy attraction, solving the integral equation for the three-body Green's function both in the coordinate and in the momentum space. The results for the three-body scattering amplitude appear to be ambiguous -they depend on a single real parameter. This parameter may be fixed by a three-body input, e.g., the three-body scattering length. We also solve the integral equation for the three-body Green function in the momentum space, introducing a finite cut-off. We show that all three approaches are equivalent. We also discuss how our approach to the problem matches with the introduction of three-body contact interaction as done by other authors. (orig.)

Clinical use of dental classification.

Science.gov (United States)

Jones, Gordon

2008-01-01

The Dental Classification system used by the uniformed services is supposed to predict the incidence of dental emergencies in the operational setting, at least on the unit level. Since most Sailors and Marines are deployed without close dental support, the sea services have adopted a policy of early treatment of class 3 dental conditions during recruit training. The other services are beginning to do the same. Recently, two factors have emerged that are affecting this early dental class 3 treatment. These factors must be considered when planning to provide early dental treatment. First, changing population and dentist provider demographics in the civilian sector are beginning to affect the class 3 treatment needs of incoming military recruits. Second, attrition from recruit training results in treatment provided to recruits who leave military service before finishing their training. Some view this as a waste of resources, others as a cost of doing business. As operational jointness increases, the three services must develop and use a single dental classification terminology, as well as unified standards and guidelines, both for better research in this area and for the readiness and well-being of our patients.

Accident statistics for fixed offshore units on the UK Continental Shelf 1980-2001

International Nuclear Information System (INIS)

Funnemark, E.; Young, E.

2003-01-01

Comprehensive statistics for the accidents and incidents on fixed units engaged in oil and gas exploration/exploitation on the UK continental shelf between 1980 and 2001 have been assembled from other databases. The data includes nature of the incident, type of unit involved, geographical area and time period. The results cover a total of 5,563 events which are described as accidents, hazardous situations or near misses

High-resolution MR imaging for dental impressions: a feasibility study.

Science.gov (United States)

Boldt, Julian; Rottner, Kurt; Schmitter, Marc; Hopfgartner, Andreas; Jakob, Peter; Richter, Ernst-Jürgen; Tymofiyeva, Olga

2018-04-01

Magnetic resonance imaging is an emerging technology in dental medicine. While low-resolution MRI has especially provided means to examine the temporomandibular joint due to its anatomic inaccessibility, it was the goal of this study to assess whether high-resolution MRI is capable of delivering a dataset sufficiently precise enough to serve as digital impression of human teeth. An informed and consenting patient in need of dental restoration with fixed partial dentures was chosen as subject. Two prepared teeth were measured using MRI and the dataset subjected to mathematical processing before Fourier transformation. After reconstruction, a 3D file was generated which was fed into an existing industry standard CAD/CAM process. A framework for a fixed dental prosthesis was digitally modeled and manufactured by laser-sintering. The fit in situ was found to be acceptable by current clinical standards, which allowed permanent placement of the fixed prosthesis. Using a clinical whole-body MR scanner with the addition of custom add-on hardware, contrast enhancement, and data post-processing, resolution and signal-to-noise ratio were sufficiently achieved to allow fabrication of a dental restoration in an acquisition time comparable to the setting time of common dental impression materials. Furthermore, the measurement was well tolerated. The herein described method can be regarded as proof of principle that MRI is a promising option for digital impressions when fixed partial dentures are required.

Growth and Identification of Bacteria in N-Halamine Dental Unit Waterline Tubing Using an Ultrapure Water Source

Science.gov (United States)

Porteous, Nuala; Luo, Jie; Hererra, Monica; Schoolfield, John; Sun, Yuyu

2011-01-01

This study examined bacterial growth and type on biofilm-controlling dental unit waterline (DUWL) tubing (T) and control manufacturer's tubing (C) in a laboratory DUWL model using ultrapure source water that was cycled through the lines. Sections of tubing lines were detached and examined for biofilm growth using SEM imaging at six sampling periods. Bacteria from inside surfaces of T and C, source unit, and reservoir were cultured and enumerated. At six months, organisms were molecularly identified from the alignment matches obtained from the top three BLAST searches for the 16S region. There was a 1–3 log increase in organism growth in a clean, nonsterile reservoir within an hour. Biofilm was established on the inside surfaces of C within three weeks, but not on T. Proteobacteria, and Sphingomonas spp. were identified in the source reservoir and C line, and a variation of the genera was found in T line. PMID:22220171

The Validity of Subjects in Korean Dental Technicians' Licensing Examination

Directory of Open Access Journals (Sweden)

Woong-chul Kim

2005-06-01

Full Text Available This study prepared a basic framework for the development and improvement of Korean Dental Technicians' Licensing Examination, based on actual test questions. A peer review was conducted to ensure relevance to current practices in dental technology. For the statistical analysis, 1000 dental laboratory technicians were selected; specialists in dental laboratory technology (laboratory owners, educators, etc. were involved in creating valid and reliable questions. Results indicated that examination subjects should be divided into three categories: basic dental laboratory theory, dental laboratory specialties, and a practical examination. To ensure relevance to current practice, there should be less emphasis on basic dental laboratory theory, including health-related laws, and more emphasis on dental laboratory specialties. Introduction to dental anatomy should be separated from oral anatomy and tooth morphology; and fixed prosthodontics should be separated from crown and bridge technology and dental ceramics technology. Removable orthodontic appliance technology should be renamed 'orthodontic laboratory technology'. There should be less questions related to health related law, oral anatomy, dental hygiene, dental materials science and inlay, while the distribution ratio of questions related to tooth morphology should be maintained. There should be a decrease in the distribution ratio of questions related to crown and bridge technology, dental ceramics technology, complete dentures and removable partial dentures technology, and orthodontic laboratory technology. In the practical examination, the current multiple choice test should be replaced with tooth carving using wax or plaster. In dental laboratory specialties, subjects related to contemporary dental laboratory technology should be included in the test items.

Disparity in Dental Attendance Among Older Adult Populations: A Comparative Analysis Across Selected European Countries and the United States

Science.gov (United States)

Manski, Richard; Moeller, John; Chen, Haiyan; Widström, Eeva; Listl, Stefan

2015-01-01

Background The current study addresses the extent to which diversity in dental attendance across population subgroups exists within and between the United States and selected European countries. Method The analyses relied on 2006/2007 data from the Survey of Health, Ageing, and Retirement in Europe (SHARE) and 2004–2006 data from of the Health and Retirement Study (HRS) in the United States for respondents aged 51 years and older. Logistic regression models were estimated to identify impacts of dental care coverage and oral as well as general health status on dental care use. Results We were unable to discern significant differences in dental attendance across population subgroups in countries with and without social health insurance, between the USA and European countries, and between European countries classified by social welfare regime. Patterns of diverse dental use were found, but they did not appear predominately in countries classified by welfare state regime or by presence or absence of social health insurance. Conclusions Findings of this study suggest that income and education have stronger and more persistent correlation with dental use than the correlation between dental insurance and dental use across European countries. We conclude that (1) higher overall rates of coverage in most European countries, compared to relatively lower rates in the USA, contribute to this finding and that (2) policies targeted to improving the income of older persons and their awareness of the importance of oral health care in both Europe and the USA can contribute to improving the use of dental services. PMID:26465093

Importance-performance analysis of dental satisfaction among three ethnic groups in malaysia.

Science.gov (United States)

Dewi, Fellani Danasra; Gundavarapu, Kalyan C; Cugati, Navaneetha

2013-01-01

To find the differences in patient satisfaction related to dental services among three ethnic groups - Chinese, Indian and Malay - at AIMST University Dental Centre and analyse them with an importance-performance grid, identifying the weak and strong points, in order to provide better service. This questionnaire-based study consisted of convenience samples of 174 patients of Chinese, Indian and Malay ethnicity. Importance-performance analysis for 20 attributes were compared using Likert's scale. The data obtained were statistically analysed using the Kruskal-Wallis test. Chinese and Indians both emphasised low performance on the interpersonal relationship attribute in terms of the receptionist's courtesy, whereas the Malay participants were concerned with convenience attributes. All the ethnic groups favoured maintaining existing major attributes towards technical competency, interpersonal relationship and facility factors. This study demonstrated priority differences between the ethnic groups' perception of the quality of dental services, where ethnic Chinese showed the highest gap (measure of dissatisfaction) between importance and performance compared to ethnic Malays, followed by ethnic Indians. The patients from the three major ethnic groups of Malaysia were generally well satisfied. Perhaps more priority should be placed on improving the interpersonal relationship attribute, especially with the receptionists.

Dental and skeletal changes in mild to moderate Class II malocclusions treated by either a Twin-block or Xbow appliance followed by full fixed orthodontic treatment.

Science.gov (United States)

Ehsani, Sayeh; Nebbe, Brian; Normando, David; Lagravere, Manuel O; Flores-Mir, Carlos

2015-11-01

To compare the short-term skeletal and dental effects of two-phase orthodontic treatment including either a Twin-block or an XBow appliance. This was a retrospective clinical trial of 50 consecutive Class II cases treated in a private practice with either a Twin-block (25) or XBow (25) appliance followed by full fixed orthodontic treatment. To factor out growth, an untreated Class II control group (25) was considered. A MANOVA of treatment/observation changes followed by univariate pairwise comparisons showed that the maxilla moved forward less in the treatment groups than in the control group. As for mandibular changes, the corpus length increase was larger in the Twin-block group by 3.9 mm. Dentally, mesial movement of mandibular molars was greater in both treatment groups. Although no distalization of maxillary molars was found in either treatment group, restriction of mesial movement of these teeth was seen in both treatment groups. Both treatment groups demonstrated increased mandibular incisor proclination with larger increases for the XBow group by 3.3°. The Wits value was decreased by 1.6 mm more in the Twin-block group. No sex-related differences were observed. Class II correction using an XBow or Twin-block followed by fixed appliances occurs through a relatively similar combination of dental and skeletal effects. An increase in mandibular incisor inclination for the XBow group and an increased corpus length for the Twin-block group were notable exceptions. No overall treatment length differences were seen.

Detection of oral streptococci in dental unit water lines after therapy with air turbine handpiece: biological fluid retraction more frequent than expected.

Science.gov (United States)

Petti, Stefano; Moroni, Catia; Messano, Giuseppe Alessio; Polimeni, Antonella

2013-03-01

Oral streptococci detected in water from dental unit water lines (DUWLs) are a surrogate marker of patients' biological fluid retraction during therapy. We investigated oral streptococci detection rate in DUWLs in a representative sample of private offices in real-life conditions. Samples of nondisinfected water (100 ml) were collected from the DUWL designated for the air turbine handpiece in 81 dental units, immediately after dental treatment of patients with extensive air turbine handpiece use. Water was filtered and plated on a selective medium for oral streptococci and, morphologically, typical colonies of oral streptococci were counted. The lowest detection limit was 0.01 CFU/ml. The oral streptococci detection rate was 72% (95% CI: 62-81%), with a mean level of 0.7 CFU/ml. Oral streptococci detection was not affected by handpiece age or dental treatment type, but was associated with dental unit age. Biological fluid retraction into DUWLs during patient treatment and, possibly, the risk for patient-to-patient blood- or air-borne pathogen transmission are more frequent than expected.

A survey of the bacterial diversity in the cup filler of dental chair units.

Science.gov (United States)

Silva, Vítor; Figueira, Vânia; Figueiral, Helena; Manaia, Célia M

2011-07-01

Water from the cup filler of dental chair units (CFDC) was observed to contain sphingomonads, environmental mycobacteria and methylobacteria, among other minor bacteria. Some of the bacteria detected are recognized opportunistic pathogens. Some of these, tended to persist over time.

Quality Assurance in Custom Dental Devices: A Technologist's Perspective.

Science.gov (United States)

Griffin, Anthony

2017-12-01

Manufacturing of custom-made dental devices such as removable dentures, fixed prosthodontics and orthodontics are subject to the requirements of the Medical Devices Directive (MDD). Many dental laboratories often enhance these requirements by implementing quality assurance procedures that then provide enhanced consistency. this paper provides a dental technologist's view of some of the systems currently being used in dental laboratories to provide a quality assured product and associated issues.

Position statement on use of hand-held portable dental X-ray equipment

International Nuclear Information System (INIS)

2014-06-01

The position statement focuses on justification in the medical field, in particular on the use of hand-held portable dental x-ray equipment. It supplements another HERCA position paper, providing a general overview of the use of all hand-held portable X-ray equipment. Key Messages: - HERCA finds that the use of hand-held portable X-ray devices should be discouraged except in special circumstances. - As a general rule, these devices should only be used in scenarios where an intraoral radiograph is deemed necessary for a patient and the use of a fixed or semi-mobile x-ray unit is impractical, e.g.: - nursing homes, residential care facilities or homes for persons with disabilities; - forensic odontology, - military operations abroad without dental facilities

Predictors of academic performance for applicants to an international dental studies program in the United States.

Science.gov (United States)

Pitigoi-Aron, Gabriela; King, Patricia A; Chambers, David W

2011-12-01

The number of U.S. and Canadian dental schools offering programs for dentists with degrees from other countries leading to the D.D.S. or D.M.D. degree has increased recently. This fact, along with the diversity of educational systems represented by candidates for these programs, increases the importance of identifying valid admissions predictors of success in international dental student programs. Data from 148 students accepted into the international dental studies program at the University of the Pacific from 1994 through 2004 were analyzed. Dependent variables were comprehensive cumulative GPA at the end of both the first and second years of the two-year program. The Test of English as a Foreign Language (TOEFL) and both Parts I and II of the National Board Dental Examination (NBDE) were significant positive predictors of success. Performance on laboratory tests of clinical skill in operative dentistry and in fixed prosthodontics and ratings from interviewers were not predictive of overall success in the program. Although this study confirms the predictive value of written tests such as the TOEFL and NBDE, it also contributes to the literature documenting inconsistent results regarding other types of predictors. It may be the case that characteristics of individual programs or features of the applicant pools for each may require use of admissions predictors that are unique to schools.

Evaluation of dental plaque control in patients wearing fixed orthodontic appliances: a clinical study.

Science.gov (United States)

Ousehal, Lahcen; Lazrak, Laila; Es-Said, Rabia; Hamdoune, Hind; Elquars, Farid; Khadija, Amine

2011-03-01

Multibracket orthodontic appliances increase dental plaque retention and make teethbrushing more difficult for patients. As a result, advice from the orthodontist on oral hygiene along with patient motivation regarding teethbrushing are particularly important. The aim of this study was to compare the efficacy of electric toothbrushes with that of manual brushing associated with mouth-rinses comprising chlorhexidine (0.12%) and 0% alcohol. To this end, 84 patients receiving current orthodontic treatment were randomly selected from patients treated at the Dento-Facial Orthopedics department in the Casablanca Dental Consultation and Treatment Center. Selected patients were divided into three groups: Group 1: manual teethbrushing; Group 2: electric teethbrushing; Group 3: manual brushing combined with mouth rinse. Oral hygiene was assessed using the Loe-Silness plaque and gingival indices. Measurements were made before and 4 weeks after the observation period. Results were subjected to statistical comparison in order to determine the group showing greatest improvement and to deduce the best means of controlling bacterial plaque. The electric toothbrush and the chlorhexidine mouth rinse appear to control dental plaque more effectively than manual teethbrushing alone. Following this study, patients receiving multibracket treatment were invited to combine manual brushing with short clinical mouth-rinsing sessions or to use an electric toothbrush. Copyright © 2011 CEO. Published by Elsevier Masson SAS. All rights reserved.

A survey of the bacterial diversity in the cup filler of dental chair units

Directory of Open Access Journals (Sweden)

Vítor Silva

2011-09-01

Full Text Available Water from the cup filler of dental chair units (CFDC was observed to contain sphingomonads, environmental mycobacteria and methylobacteria, among other minor bacteria. Some of the bacteria detected are recognized opportunistic pathogens. Some of these, tended to persist over time.

Digitization of dental alginate impression: Three-dimensional evaluation of point cloud.

Science.gov (United States)

Kim, So-Ri; Lee, Wan-Sun; Kim, Woong-Chul; Kim, Hea-Young; Kim, Ji-Hwan

2015-01-01

The purpose of this study was to evaluate the digitization of alginate impressions by analyzing differences between the scan data of two types of impressions (alginate and rubber) taken from the master die and the scan data for the master die. The master die and impressions were digitized using a dental laser scanner (7 series, Dental Wings, Montreal, Canada). The crown portion of the abutment teeth in the digital data of 20 impressions was divided into three regions: cervical surface, middle surface, and occlusal surface. An independent t-test showed a significant difference (palginate and rubber). One-way ANOVA and Tukey's honest significant difference test revealed a significant difference (palginate impressions in the future.

Effectiveness of probiotics in the prevention of carious lesions during treatment with fixed orthodontic appliances.

Directory of Open Access Journals (Sweden)

Paula Contreras

2017-07-01

Full Text Available The difficulty experienced by patients with fixed orthodontic appliances in maintaining adequate oral hygiene poses a risk for dental caries. The use of probiotics has been proposed as a means of prevention. The following systematic review aims to determine the effectiveness of probiotics in the prevention of dental caries during treatment with fixed orthodontic appliances. This review was carried out according to the PRISMA guidelines. A comprehensive electronic search was conducted in the Cochrane Library, EMBASE, PubMed and Google Scholar Beta databases. The inclusion criteria included randomized controlled clinical trials involving the use of probiotics, caries and patients under fixed orthodontic treatment. The methodological quality of the articles was evaluated according to risk of bias. Of the five included studies, three reported significant differences compared to the control group. Of the others, one article reported significant decrease in the final count of microorganisms compared to the beginning of treatment. Only one study reported no differences of any kind. It was estimated that the eligible studies were of moderate methodological quality and had an unclear risk of bias, without affecting key domains for the research. It is concluded that the daily consumption of probiotics can be effective in the prevention of carious lesions in patients under fixed orthodontic treatment. However, this should be interpreted with caution and corroborated by clinical trials of better methodological quality.

A Comparison of Different Disinfectants on the Microbiological Quality of Water from the Dental Unit Waterlines of a Military Hospital

International Nuclear Information System (INIS)

Ma, M.S.; Zalini Yunus; Ahmad Razi Mohamed Yunus; Zukri Ahmad; Farizah Abdul Fatah

2015-01-01

Water from the dental unit waterlines (DUWLs) is known to contaminate with microbial from the biofilm that formed in the tubing system. The water quality from DUWLs is important to patients and dental health care professionals as they could be infected either directly from the contaminated water or aerosol that is generated during dental procedures. Suppliers claimed that dental units supplied to the hospital can only use a specific disinfectant which is uneconomic compared with the others. The aims of this study were to evaluate and compare the efficacy of different disinfectant on the water quality of DUWLs. Four disinfectants (Calbenium, A-dec ICX tablet, Dentel 5, Metassys) and distil water were evaluated. 350 mL water sample was collected separately, from the outlet of high-speed hand piece, scaler, 3-ways syringe and cup filler into a sterile thiosulfate bag on the 1st, 2nd, 4th, 8th, 12th and 24th weeks of the study. The samples were tested on the following day for total viable count (TVC). There is significant difference in the efficacies of the different disinfectants. Only one disinfectant consistently produces water quality within the recommended level of American Dental Association (ADA). Within the limitation of this study, it was found that there is alternative disinfectant that can reduce the TVC to the level recommended by ADA. However, the water qualities produced with these disinfectants were not consistent although they did not cause any technical problem to the dental units during the period of study. (author)

The status of undergraduate implant education in dental schools outside the United States.

Science.gov (United States)

Seckinger, R J; Weintraub, A M; Berthold, P; Weintraub, G S

1995-01-01

Over the past 20 years the incorporation of implant dentistry into academia has been documented in some detail for North American dental schools but has not been pursued on an international level. In June of 1993, we surveyed 51 dental schools outside of the United States affiliated with the University of Pennsylvania School of Dental Medicine's Office of International Relations concerning their teaching involvement with implant dentistry. Results from the 44 (86 percent) responding schools suggest that implant dentistry is being incorporated into predoctoral curriculums. Industrialized countries were more inclined to provide implant education. Insufficient time and the thought that the predoctoral level was not the place for implant dentistry were cited as some of the reasons for not incorporating implant dentistry into the curriculum. Oral surgery, prosthodontics, and periodontics departments developed and administered the implant curriculum. Formats varied among schools with respect to allotted time, curricular placement, laboratory experience, and clinical participation. Didactic material most frequently presented included a historical overview, diagnosis and treatment planning, classification of dental implants, and surgical and prosthetic concepts. Clinical involvement varied from actual implant placement to observation of prosthodontic procedures. Results were categorized based on the TOEFL (Test of English as a Foreign Language) classification of countries in six regions.

Sampling design and procedures for fixed surface-water sites in the Georgia-Florida coastal plain study unit, 1993

Science.gov (United States)

Hatzell, H.H.; Oaksford, E.T.; Asbury, C.E.

1995-01-01

The implementation of design guidelines for the National Water-Quality Assessment (NAWQA) Program has resulted in the development of new sampling procedures and the modification of existing procedures commonly used in the Water Resources Division of the U.S. Geological Survey. The Georgia-Florida Coastal Plain (GAFL) study unit began the intensive data collection phase of the program in October 1992. This report documents the implementation of the NAWQA guidelines by describing the sampling design and procedures for collecting surface-water samples in the GAFL study unit in 1993. This documentation is provided for agencies that use water-quality data and for future study units that will be entering the intensive phase of data collection. The sampling design is intended to account for large- and small-scale spatial variations, and temporal variations in water quality for the study area. Nine fixed sites were selected in drainage basins of different sizes and different land-use characteristics located in different land-resource provinces. Each of the nine fixed sites was sampled regularly for a combination of six constituent groups composed of physical and chemical constituents: field measurements, major ions and metals, nutrients, organic carbon, pesticides, and suspended sediments. Some sites were also sampled during high-flow conditions and storm events. Discussion of the sampling procedure is divided into three phases: sample collection, sample splitting, and sample processing. A cone splitter was used to split water samples for the analysis of the sampling constituent groups except organic carbon from approximately nine liters of stream water collected at four fixed sites that were sampled intensively. An example of the sample splitting schemes designed to provide the sample volumes required for each sample constituent group is described in detail. Information about onsite sample processing has been organized into a flowchart that describes a pathway for each of

Complications and patient-centered outcomes with an implant-supported monolithic zirconia fixed dental prosthesis: 1 year results.

Science.gov (United States)

Limmer, Bryan; Sanders, Anne E; Reside, Glenn; Cooper, Lyndon F

2014-06-01

To characterize the number and type of complications that occur with a monolithic zirconia fixed dental prosthesis (MZ-FDP) supported by four endosseous implants in the edentulous mandible over time and to quantify the impact of treatment on oral health quality of life (OHQoL). Seventeen edentulous participants were enrolled. New conventional dentures were fabricated for each participant. Four Astra Tech Osseospeed TX implants (Dentsply) were then placed in the parasymphyseal mandible, and after a period of healing, a full-arch monolithic zirconia prosthesis (Zirkonzahn) was inserted. Complication data were recorded and OHQoL was evaluated using the Oral Health Impact Profile (OHIP-49), administered on four occasions: enrollment; implant surgery; and 6- and 12-month recalls. Sixty-eight implants were placed in 17 edentulous individuals aged 30 to 78 (mean 57.9 years). Implant survival was 94% from the subject perspective and 99% from the implant perspective. Prosthesis survival was 88%. Twelve complications occurred in ten participants, whereas seven participants remained complication free. Both OHIP-49 severity and extent scores decreased significantly between enrollment and 12-month recall (p < 0.001). The mean OHIP-49 severity score at baseline was 94.8 (95% confidence interval [CI]: 73.9, 115.8) and declined an average of 76.8 (95% CI: -91.3, -62.3) units per participant. The mean OHIP-49 extent score at baseline was 17.2 (95% CI: 10.8, 23.6) and declined 16.3 (95% CI: -20.2, -12.4) units per participant on average. Implant survival was high, and few complications related to the MZ-FDP were observed. The most common prosthetic complication was tooth chipping in the opposing maxillary denture, which accounted for 50% of all complication events. Substantial and clinically important improvements in OHQoL were achieved with both conventional dentures and the implant-supported MZ-FDP. The data of this short-term study indicate that the implant-supported MZ-FDP is a

Pressures on the dental care system in the United States.

Science.gov (United States)

Wotman, S; Goldman, H

1982-07-01

A number of significant pressures are creating tensions in the dental profession and the dental care delivery system. These pressures may be categorized in five major areas: 1) regulation and deregulation pressures involve changes in the state dental practice acts, court decisions concerning antitrust and advertising, and the inclusion of consumers on State professional regulatory boards; 2) cost of services includes factors involving the out-of-pocket cost of dental care and the growth of dental insurance; 3) dentist-related factors include the increased number of dentists and the indebtedness of dental graduates; 4) the pressures of changes in the American populations include the decline in population growth and the increase in proportion of elderly people; 5) changes in the distribution of dental care are based on new epidemiologic data concerning dental caries and progress in the prevention of periodontal disease. Many of these pressures are inducing competition in the dental care system. It is clear that the dental care system is in the process of change as it responds to these complex pressures.

Digital versus conventional impressions for fixed prosthodontics: A systematic review and meta-analysis.

Science.gov (United States)

Chochlidakis, Konstantinos M; Papaspyridakos, Panos; Geminiani, Alessandro; Chen, Chun-Jung; Feng, I Jung; Ercoli, Carlo

2016-08-01

Limited evidence is available for the marginal and internal fit of fixed dental restorations fabricated with digital impressions compared with those fabricated with conventional impressions. The purpose of this systematic review was to compare marginal and internal fit of fixed dental restorations fabricated with digital techniques to those fabricated using conventional impression techniques and to determine the effect of different variables on the accuracy of fit. Medline, Cochrane, and EMBASE databases were electronically searched and enriched by hand searches. Studies evaluating the fit of fixed dental restorations fabricated with digital and conventional impression techniques were identified. Pooled data were statistically analyzed, and factors affecting the accuracy of fit were identified, and their impact on accuracy of fit outcomes were assessed. Dental restorations fabricated with digital impression techniques exhibited similar marginal misfit to those fabricated with conventional impression techniques (P>.05). Both marginal and internal discrepancies were greater for stone die casts, whereas digital dies produced restorations with the smallest discrepancies (Pdigital impression was used to generate stereolithographic (SLA)/polyurethane dies, misfit values were intermediate. The fabrication technique, the type of restoration, and the impression material had no effect on misfit values (P>.05), whereas die and restoration materials were statistically associated (Pdigital impression technique provided better marginal and internal fit of fixed restorations than conventional techniques did. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Biomechanical comparison of two different collar structured implants supporting 3-unit fixed partial denture: a 3-D FEM study.

Science.gov (United States)

Meriç, Gökçe; Erkmen, Erkan; Kurt, Ahmet; Eser, Atilim; Ozden, Ahmet Utku

2012-01-01

The purpose of the study was to compare the effects of two distinct collar geometries of implants on stress distribution in the bone as well as in the fixture-abutment complex, in the framework and in the veneering material of 3-unit fixed partial denture (FPD). The 3-dimensional finite element analysis method was selected to evaluate the stress distribution in the system composed of 3-unit FPD supported by two different dental implant systems with two distinct collar geometries; microthread collar structure (MCS) and non-microthread collar structure (NMCS). In separate load cases, 300 N vertical, 150 N oblique and 60 N horizontal, forces were utilized to simulate the multidirectional chewing forces. Tensile and compressive stress values in the cortical and cancellous bone and von Mises stresses in the fixture-abutment complex, in the framework and veneering material, were simulated as a body and investigated separately. In the cortical bone lower stress values were found in the MCS model, when compared with NMCS. In the cancellous bone, lower stress values were observed in the NMCS model when compared with MCS. In the implant-abutment complex, highest von Mises stress values were noted in the NMCS model; however, in the framework and veneering material, highest stress values were calculated in MCS model. MCS implants when compared with NMCS implants supporting 3-unit FPDs decrease the stress values in the cortical bone and implant-abutment complex. The results of the present study will be evaluated as a base for our ongoing FEA studies focused on stress distribution around the microthread and non-microthread collar geometries with various prosthesis design.

Effects of team-based learning on fixed prosthodontic education in a Japanese School of Dentistry.

Science.gov (United States)

Takeuchi, Hisahiro; Omoto, Katsuhiro; Okura, Kazuo; Tajima, Toyoko; Suzuki, Yoshitaka; Hosoki, Maki; Koori, Motoharu; Shigemoto, Shuji; Ueda, Mayu; Nishigawa, Keisuke; Rodis, Omar Marianito Maningo; Matsuka, Yoshizo

2015-04-01

The aims of this study were to evaluate the quality of team-based learning (TBL) in prosthodontics education for fourth-year dental students at Tokushima University School of Dentistry and to compare this teaching method with traditional lecture-based delivery. Participants in the study were 36 students (22 males and 14 females) who attended the TBL-style fixed prosthodontics course. Ten 60-minute classes were held. The first three were traditional lecture-style classes and were followed by one class introducing the TBL style. The remaining six classes constituted the TBL-format fixed prosthodontics course. The effectiveness of TBL was evaluated through student questionnaires at the end of each class and the results of the term-end examination. The questionnaire revealed high student approval for TBL-style learning, and active group discussion among students during TBL was a key factor in these ratings. In the results of the term-end examination, there were significantly higher scores on the questions that covered TBL-taught material than those covering traditional lecture-taught topics. The results of this study suggest that TBL-style lecture was more effective than traditional-style lecture for teaching fixed prosthodontics and that TBL was a more efficient mode of delivering dental education than traditional lecture-based teaching.

Self-reported oral health, oral hygiene habits and dental service utilization among pregnant women in United Arab Emirates.

Science.gov (United States)

Hashim, R

2012-05-01

The aim of this study was to describe self-reported oral health, oral hygiene habits and frequency of visits to a dentist among pregnant women visiting maternity hospitals in the United Arab Emirates. A cross-sectional study was conducted, with anonymous structured questionnaires distributed to 800 pregnant women who were chosen at random from attendants of three maternity and child health centres from various geographical areas of UAE, during January-March 2010. The response rate was 93.7% (n = 750). Less than quarter of the participated pregnant women were in their first trimester. Almost a quarter (23.5%) of the women believed that they had periodontal problem currently, while 46.3% reported having carious teeth. More than 44% reported having dental pain, and about 40% women felt that her oral health was poor. About 60% reported having heard about the possible connection between pregnancy and the oral health. About 94% of the women were brushing their teeth at least once a day. More than half of the women (58.3%) visited the dentist during their most recent pregnancy, mostly for dental pain. A large proportion of the pregnant women in this study had oral health problems; however, more than 40% of those women had not visited a dentist during their pregnancy, and the majority of those utilized dental services when they had dental pain only. To provide better oral health care, more knowledge needs to be made available to the pregnant women and the medical community. © 2011 John Wiley & Sons A/S.

The study on the protection and actual condition of using the dental x-ray unit

International Nuclear Information System (INIS)

Kang, Eun Ju; Yoo, Beong Gyu

2000-01-01

This paper will present the result of research which was done with 201 places on the actual condition of using dental diagnostic radiography unit and the protection of radiography. The purpose of this paper is to comprehend the actual condition of using dental x-ray unit and to protect when they do radiation work. Moreover this paper was completed to prepare basic materials that could be helpful to reduce the exposure from radiation. This paper obtains the following result. On radiation photographing work in the dentist office, 60.3% of dental hygienists treat this job, and 19.2% of assistants, 10.8% of dentists, 5.6% of radiolotechnologists and 4.2% others performed this job. The case that radiation worker is educated about diagnostic radiography safety supervision has been shown 14.4% and uneducated case has been shown 78.1%. The result about the actual condition of using the oral diagnostic radiation per day was that a number of film which take photograph again (less than 1 exposure) was 40.3%. Normal photographing (1 ∼ 10 exposure) was 85.1% which is the highest percentage. Using the bitewing film and occlusal film was 7.0%, and 12.4% respectively. The percent that they use cephalo film and panoramic film was 16.4%, 29.8% respectively. Dental intra diagnostic radiography unit made in 1996 ∼ 2000 was 24.9% and the one made in 1991 ∼ 1995 was 19.9%, in 1986 ∼ 1990 was 19.9%, in 1985 was 9.5% according to the answer. On kVp, they use 60 kVp mostly (61.7%) and On mA, they use 10 mA with the highest percent (66.7%). On the dental extra diagnostic radiography units which are used for doing the extra oral radiography, the one made in 1996 ∼ 2000 was 13.4%, in 1991 ∼ 1995 was 9.5%, in 1985 ∼ 1990 was 2.0% according to the answer. They use 71 ∼ 80 kVp with 10.9% and 60 ∼ 75 kVp with 9.5%. They use less than 10 mA with 19.4% and 11 ∼ 15 mA with 2.5%, 16 ∼ 20 mA with 1.5%. But the case they exactly do not know how much mA they use or they do not have

The study on the protection and actual condition of using the dental x-ray unit

Energy Technology Data Exchange (ETDEWEB)

Kang, Eun Ju; Yoo, Beong Gyu [Wonkwang Health Science College, Iksan (Korea, Republic of)

2000-04-15

This paper will present the result of research which was done with 201 places on the actual condition of using dental diagnostic radiography unit and the protection of radiography. The purpose of this paper is to comprehend the actual condition of using dental x-ray unit and to protect when they do radiation work. Moreover this paper was completed to prepare basic materials that could be helpful to reduce the exposure from radiation. This paper obtains the following result. On radiation photographing work in the dentist office, 60.3% of dental hygienists treat this job, and 19.2% of assistants, 10.8% of dentists, 5.6% of radiolotechnologists and 4.2% others performed this job. The case that radiation worker is educated about diagnostic radiography safety supervision has been shown 14.4% and uneducated case has been shown 78.1%. The result about the actual condition of using the oral diagnostic radiation per day was that a number of film which take photograph again (less than 1 exposure) was 40.3%. Normal photographing (1 {approx} 10 exposure) was 85.1% which is the highest percentage. Using the bitewing film and occlusal film was 7.0%, and 12.4% respectively. The percent that they use cephalo film and panoramic film was 16.4%, 29.8% respectively. Dental intra diagnostic radiography unit made in 1996 {approx} 2000 was 24.9% and the one made in 1991 {approx} 1995 was 19.9%, in 1986 {approx} 1990 was 19.9%, in 1985 was 9.5% according to the answer. On kVp, they use 60 kVp mostly (61.7%) and On mA, they use 10 mA with the highest percent (66.7%). On the dental extra diagnostic radiography units which are used for doing the extra oral radiography, the one made in 1996 {approx} 2000 was 13.4%, in 1991 {approx} 1995 was 9.5%, in 1985 {approx} 1990 was 2.0% according to the answer. They use 71 {approx} 80 kVp with 10.9% and 60 {approx} 75 kVp with 9.5%. They use less than 10 mA with 19.4% and 11 {approx} 15 mA with 2.5%, 16 {approx} 20 mA with 1.5%. But the case they

A Mid-Level Dental Provider in Oregon: Dental hygienists' perceptions.

Science.gov (United States)

Coplen, Amy E; Bell, Kathryn; Aamodt, Gail L; Ironside, Lynn

2017-10-01

Purpose: Many states are exploring alternative provider models and examining the role of the dental hygienist to address access to care challenges as the United States continues to face increasing demands for oral healthcare services. The purpose of this study was to assess dental hygienists' opinions in the state of Oregon regarding the current limitations of dental hygienists' scope of practice, perceived need for a mid-level provider in Oregon, and personal interest in becoming a mid-level provider. Methods: In December 2013 a survey was mailed to a sample of 1,231 dental hygienists registered in Oregon representing 30% of the licentiates. All licentiates holding expanded practice permits (EPP) were included in the sample (n=351). The following categories were included in the 32-question survey: scope of practice, mid-level provider, current practice, and demographics. Results: A total of 440 surveys were returned for a response rate of 36%. Of the EPP holders, 51% responded to the survey. Over half of respondents (59%) believe that a mid-level provider is needed in the state. Respondents holding membership in the American Dental Hygienists' Association, as well as EPP holders, were significantly more likely to respond that a mid-level dental provider was needed in the state (plevel provider was introduced in Oregon, the new provider should be a registered dental hygienist model. Forty-three percent (n=186) of respondents were interested in becoming mid-level providers and 47% (n=203) of respondents believed that the minimum education for a mid-level provider should be a bachelor's degree. The majority, 74% (n=137), of those interested in becoming a mid-level provider indicated a preference in completing their education through online teaching combined with a clinical internship. Conclusion: There is strong support from dental hygienists in Oregon that a need exists for a mid-level dental provider and that this provider model should be dental hygiene based

Three Boundary Conditions for Computing the Fixed-Point Property in Binary Mixture Data.

Directory of Open Access Journals (Sweden)

Leendert van Maanen

Full Text Available The notion of "mixtures" has become pervasive in behavioral and cognitive sciences, due to the success of dual-process theories of cognition. However, providing support for such dual-process theories is not trivial, as it crucially requires properties in the data that are specific to mixture of cognitive processes. In theory, one such property could be the fixed-point property of binary mixture data, applied-for instance- to response times. In that case, the fixed-point property entails that response time distributions obtained in an experiment in which the mixture proportion is manipulated would have a common density point. In the current article, we discuss the application of the fixed-point property and identify three boundary conditions under which the fixed-point property will not be interpretable. In Boundary condition 1, a finding in support of the fixed-point will be mute because of a lack of difference between conditions. Boundary condition 2 refers to the case in which the extreme conditions are so different that a mixture may display bimodality. In this case, a mixture hypothesis is clearly supported, yet the fixed-point may not be found. In Boundary condition 3 the fixed-point may also not be present, yet a mixture might still exist but is occluded due to additional changes in behavior. Finding the fixed-property provides strong support for a dual-process account, yet the boundary conditions that we identify should be considered before making inferences about underlying psychological processes.

Ceramics for Dental Applications: A Review

Directory of Open Access Journals (Sweden)

Julie A. Holloway

2010-01-01

Full Text Available Over the past forty years, the technological evolution of ceramics for dental applications has been remarkable, as new materials and processing techniques are steadily being introduced. The improvement in both strength and toughness has made it possible to expand the range of indications to long-span fixed partial prostheses, implant abutments and implants. The present review provides a state of the art of ceramics for dental applications.

Efficacy of fluoride varnish for preventing white spot lesions and gingivitis during orthodontic treatment with fixed appliances-a prospective randomized controlled trial.

Science.gov (United States)

Kirschneck, Christian; Christl, Jan-Joachim; Reicheneder, Claudia; Proff, Peter

2016-12-01

The development of white spot lesions around orthodontic brackets and gingivitis is a common problem during orthodontic treatment with fixed appliances. This prospective randomized double-blind controlled clinical trial investigated the preventive efficacy of a one-time application of two commonly used fluoride varnishes in patients with low to moderate caries risk. Ninety adolescent orthodontic patients with a low to moderate caries risk were prospectively randomized to three groups of 30 patients each: (1) standardized dental hygiene with fluoride toothpaste and one-time application of placebo varnish (control) or (2) of elmex® fluid or (3) of Fluor Protector S on all dental surfaces at the start of fixed therapy. The extent of enamel demineralization and gingivitis was determined with the ICDAS and the gingivitis index (GI) at baseline and after 4, 12, and 20 weeks. Each treatment group showed a significant increase of the ICDAS index, but not of the GI over the course of time with no significant intergroup differences detectable. A one-time application of fluoride varnish at the start of orthodontic treatment did not provide any additional preventive advantage over sufficient dental hygiene with fluoride toothpaste with regard to formation of white spots and gingivitis in patients with a low to moderate caries risk. In dental practice, patients often receive an application of fluoride varnish at the start of orthodontic treatment with fixed appliances. However, the efficacy of this procedure is still unclear.

Office-based preventive dental program and statewide trends in dental caries.

Science.gov (United States)

Achembong, Leo N; Kranz, Ashley M; Rozier, R Gary

2014-04-01

To evaluate the impact of a North Carolina Medicaid preventive dentistry program in primary care medical offices (Into the Mouths of Babes Program [IMBP]) on decayed, missing, and filled teeth (dmft) of kindergarten students statewide and in schools with a large proportion of students from low-income families. An ecologic study using panel data of 920,505 kindergarten students with 11,694 school-year observations examined the effect of the IMBP on dmft scores from 1998 to 2009. Ordinary least squares regression with fixed effects determined the association between IMBP visits per child 0 to 4 years of age per county and mean dmft scores per kindergarten student per school, controlling for school-level poverty and ethnicity, county-level Medicaid enrollment, and supply of dentists and physicians. Mean dmft per kindergarten student per school increased from 1.53 in 1998 to 1.84 in 2004, then decreased to 1.59 in 2009. The mean number of IMBP visits per child 0 to 4 years of age per county increased from 0.01 in 2000 to 0.22 in 2009. A 1-unit increase in IMBP visits per county was associated with a 0.248 (95% confidence interval, -0.40 to -0.10) decrease in dmft per kindergarten student per school. For schools with more students at high risk for dental disease, a 1-unit increase in IMBP visits was associated with a 0.320 (95% confidence interval, -0.55 to -0.09) decrease in dmft. IMBP reduced dental caries among targeted vulnerable children, which helped reduce oral health disparities among preschool-aged children in North Carolina.

Description and Documentation of the Dental School Dental Delivery System.

Science.gov (United States)

Chase, Rosen and Wallace, Inc., Alexandria, VA.

A study was undertaken to describe and document the dental school dental delivery system using an integrated systems approach. In late 1976 and early 1977, a team of systems analysts and dental consultants visited three dental schools to observe the delivery of dental services and patient flow and to interview administrative staff and faculty.…

The quality of impressions for crowns and bridges: an assessment of the work received at three commercial dental laboratories. assessing the quality of the impressions of prepared teeth.

Science.gov (United States)

Storey, D; Coward, T J

2013-06-01

The literature is limited in studies directly assessing the quality of impressions for crowns and bridges in the UK. The aim of the study was to assess the quality of impressions for conventional crown and bridgework received by commercial dental laboratories. Three dental laboratories were visited over a 3-month period. All impressions for conventional crowns and bridges that arrived on the days of the visits were examined prior to any laboratory processing. A total of 206 impression cases were examined and assessed against criteria laid out in a custom-designed assessment form. Defects were commonly found in the recording of prepared teeth. Overall, 44.2% of impression cases were unsatisfactory. NHS impressions were more than twice as likely to be unsatisfactory compared to private impressions. If the results of this survey are typical then the general quality of impressions for fixed crown and bridgework is unacceptable. This is particularly true for work completed under the NHS contract.

Three-dimensional dental arch changes of patients submitted to orthodontic-surgical treatment for correction of Class II malocclusion.

Science.gov (United States)

Peixoto, Adriano Porto; dos Santos Pinto, Ary; Garib, Daniela Gamba; Gonçalves, João Roberto

2014-01-01

This study assessed the three-dimensional changes in the dental arch of patients submitted to orthodontic-surgical treatment for correction of Class II malocclusions at three different periods. Landmarks previously identified on upper and lower dental casts were digitized on a three-dimensional digitizer MicroScribe-3DX and stored in Excel worksheets in order to assess the width, length and depth of patient's dental arches. During orthodontic preparation, the maxillary and mandibular transverse dimensions measured at the premolar regions were increased and maintained throughout the follow-up period. Intercanine width was increased only in the upper arch during orthodontic preparation. Maxillary arch length was reduced during orthodontic finalization, only. Upper and lower arch depths were stable in the study periods. Differences between changes in centroid and gingival points suggested that upper and lower premolars buccaly proclined during the pre-surgical period. Maxillary and mandibular dental arches presented transverse expansion at premolar regions during preoperative orthodontic preparation, with a tendency towards buccal tipping. The transverse dimensions were not altered after surgery. No sagittal or vertical changes were observed during the follow-up periods.

Zygomatic implant-retained fixed complete denture for an elderly patient.

Science.gov (United States)

Baig, Mirza Rustum; Rajan, Gunaseelan; Yunus, Norsiah

2012-06-01

Dental rehabilitation of a completely edentulous geriatric patient has always been a challenge to the clinician, especially in treating those with higher expectations and demands. Treatment duration and the amount of residual alveolar bone available are often important considerations when planning for dental implant-based fixed treatment for these patients. With the introduction of zygomatic implants, a graftless alternative solution has emerged for deficient maxillary bone with provision for immediate loading. This article describes the treatment of a completely edentulous elderly patient using zygomatic implants in conjunction with conventional implants. The implants were immediately loaded using a definitive acrylic resin fixed denture reinforced with a cast metal framework, to provide function and aesthetics. © 2011 The Gerodontology Society and John Wiley & Sons A/S.

Ten-year survival and complication rates of lithium-disilicate (Empress 2) tooth-supported crowns, implant-supported crowns, and fixed dental prostheses.

Science.gov (United States)

Teichmann, Maren; Göckler, Fabian; Weber, Volker; Yildirim, Murat; Wolfart, Stefan; Edelhoff, Daniel

2017-01-01

To prospectively evaluate the clinical long-term outcome of tooth-supported crowns (SCs), implant-supported crowns (ISCs), and fixed dental prostheses (FDPs) made of a lithium-disilicate glass-ceramic framework material (IPS Empress 2). Between 1997 and 1999, a total of 184 restorations (106 SCs, 32 ISCs, 33 FDPs, and 13 diverse restorations) were placed in 73 patients. Kaplan-Meier estimation was applied for survival and chipping-free rates. Inter-group comparison of both rates was realized by a log rank test and a 2×2 contingency table. Also, SCs and FDPs were compared regarding adhesive vs. conventional cementation, and anterior vs. posterior positioning, for impact on survival. Due to 14 dropouts (34 restorations) and reasonable exclusion of 19 other restorations, the final dataset included: i) 87 SCs [37 patients, mean observation time 11.4 (±3.8)years]; ii) 17 ISCs [12 patients, mean observation time 13.3 (±2.3)years; and iii) 27 FDPs [19 patients, mean observation time 8.9 (±5.4)years]. The 10-year survival rate/chipping-free rate for SCs were 86.1%/83.4%, for ISCs 93.8%/94.1%, and for FDPs were 51.9%/90.8%. Both ISCs and SCs had a significantly higher survival than FDPs (ISCs vs. FDPs: both tests p=0.001; SCs vs. FDPs: p=0.001 and p=0.005). Differences in the chipping-free rates did not reach significance. Also, neither the cementation mode nor positioning of the restoration had an impact on survival. SCs had a slightly lower outcome than can generally be expected from single crowns. In contrast, ICSs had a favorable outcome and the FDPs predominantly failed. The practitioner's choice of dental materials is based (at best) on long-term experience. The present 10-year results are based on comprehensive data analyses and show the high potential of lithium-disilicate as a reliable material, especially for single-unit restoration. Copyright © 2016 Elsevier Ltd. All rights reserved.

Stress and strain distribution in three different mini dental implant designs using in implant retained overdenture: a finite element analysis study

Science.gov (United States)

AUNMEUNGTONG, W.; KHONGKHUNTHIAN, P.; RUNGSIYAKULL, P.

2016-01-01

SUMMARY Finite Element Analysis (FEA) has been used for prediction of stress and strain between dental implant components and bone in the implant design process. Purpose Purpose of this study was to characterize and analyze stress and strain distribution occurring in bone and implants and to compare stress and strain of three different implant designs. Materials and methods Three different mini dental implant designs were included in this study: 1. a mini dental implant with an internal implant-abutment connection (MDIi); 2. a mini dental implant with an external implant-abutment connection (MDIe); 3. a single piece mini dental implant (MDIs). All implant designs were scanned using micro-CT scans. The imaging details of the implants were used to simulate models for FEA. An artificial bone volume of 9×9 mm in size was constructed and each implant was placed separately at the center of each bone model. All bone-implant models were simulatively loaded under an axial compressive force of 100 N and a 45-degree force of 100 N loading at the top of the implants using computer software to evaluate stress and strain distribution. Results There was no difference in stress or strain between the three implant designs. The stress and strain occurring in all three mini dental implant designs were mainly localized at the cortical bone around the bone-implant interface. Oblique 45° loading caused increased deformation, magnitude and distribution of stress and strain in all implant models. Conclusions Within the limits of this study, the average stress and strain in bone and implant models with MDIi were similar to those with MDIe and MDIs. The oblique 45° load played an important role in dramatically increased average stress and strain in all bone-implant models. Clinical implications Mini dental implants with external or internal connections have similar stress distribution to single piece mini dental implants. In clinical situations, the three types of mini dental implant

Stress and strain distribution in three different mini dental implant designs using in implant retained overdenture: a finite element analysis study.

Science.gov (United States)

Aunmeungtong, W; Khongkhunthian, P; Rungsiyakull, P

2016-01-01

Finite Element Analysis (FEA) has been used for prediction of stress and strain between dental implant components and bone in the implant design process. Purpose of this study was to characterize and analyze stress and strain distribution occurring in bone and implants and to compare stress and strain of three different implant designs. Three different mini dental implant designs were included in this study: 1. a mini dental implant with an internal implant-abutment connection (MDIi); 2. a mini dental implant with an external implant-abutment connection (MDIe); 3. a single piece mini dental implant (MDIs). All implant designs were scanned using micro-CT scans. The imaging details of the implants were used to simulate models for FEA. An artificial bone volume of 9×9 mm in size was constructed and each implant was placed separately at the center of each bone model. All bone-implant models were simulatively loaded under an axial compressive force of 100 N and a 45-degree force of 100 N loading at the top of the implants using computer software to evaluate stress and strain distribution. There was no difference in stress or strain between the three implant designs. The stress and strain occurring in all three mini dental implant designs were mainly localized at the cortical bone around the bone-implant interface. Oblique 45° loading caused increased deformation, magnitude and distribution of stress and strain in all implant models. Within the limits of this study, the average stress and strain in bone and implant models with MDIi were similar to those with MDIe and MDIs. The oblique 45° load played an important role in dramatically increased average stress and strain in all bone-implant models. Mini dental implants with external or internal connections have similar stress distribution to single piece mini dental implants. In clinical situations, the three types of mini dental implant should exhibit the same behavior to chewing force.

A modified efficient method for dental pulp stem cell isolation.

Science.gov (United States)

Raoof, Maryam; Yaghoobi, Mohammad Mehdi; Derakhshani, Ali; Kamal-Abadi, Ali Mohammadi; Ebrahimi, Behnam; Abbasnejad, Mehdi; Shokouhinejad, Noushin

2014-03-01

Dental pulp stem cells can be used in regenerative endodontic therapy. The aim of this study was to introduce an efficient method for dental pulp stem cells isolation. In this in-vitro study, 60 extracted human third molars were split and pulp tissue was extracted. Dental pulp stem cells were isolated by the following three different methods: (1) digestion of pulp by collagenase/dispase enzyme and culture of the released cells; (2) outgrowth of the cells by culture of undigested pulp pieces; (3) digestion of pulp tissue pieces and fixing them. The cells were cultured in minimum essential medium alpha modification (αMEM) medium supplemented with 20% fetal bovine serum(FBS) in humid 37°C incubator with 5% CO 2. The markers of stem cells were studied by reverse transcriptase polymerase chain reaction (PCR). The student t-test was used for comparing the means of independent groups. P third method, we obtained stem cells successfully with about 60% efficiency after 2 days. The results of RT-PCR suggested the expression of Nanog, Oct-4, and Nucleostemin markers in the isolated cells from dental pulps. This study proposes a new method with high efficacy to obtain dental pulp stem cells in a short time.

Lack of cytotoxicity by Trustwater Ecasol™ used to maintain good quality dental unit waterline output water in keratinocyte monolayer and reconstituted human oral epithelial tissue models.

LENUS (Irish Health Repository)

Boyle, M A

2010-11-01

We previously showed that residual treatment of dental chair unit (DCU) supply water using the electrochemically-activated solution Trustwater Ecasol™ (2.5 ppm) provided an effective long-term solution to the problem of dental unit waterline (DUWL) biofilm resulting in DUWL output water quality consistently superior to potable water.

[Clinical application of individualized three-dimensional printing implant template in multi-tooth dental implantation].

Science.gov (United States)

Wang, Lie; Chen, Zhi-Yuan; Liu, Rong; Zeng, Hao

2017-08-01

To study the value and satisfaction of three-dimensional printing implant template and conventional implant template in multi-tooth dental implantation. Thirty cases (83 teeth) with missing teeth needing to be implanted were randomly divided into conventional implant template group (CIT group, 15 cases, 42 teeth) and 3D printing implant template group (TDPIT group, 15 cases, 41 teeth). Patients in CIT group were operated by using conventional implant template, while patients in TDPIT group were operated by using three-dimensional printing implant template. The differences of implant neck and tip deviation, implant angle deviation and angle satisfaction between the two groups were compared. The difference of probing depth and bone resorption of implant were compared 1 year after operation between the two groups. The difference of success rate and satisfaction of dental implantation were compared 1 year after operation between the two groups. SPSS19.0 software package was used for statistical analysis. The deviation direction of the neck and the tip in disto-mesial, bucco-palatal, vertical direction and angle of implants in disto-mesial and bucco-palatal direction in TDPIT group were significantly lower than in CIT group (P0.05). The difference of the cumulative success rate in dental implantation at 3 months and 6 months between the two groups were not significant (P>0.05), but the cumulative success rate of TDPIT group was significantly higher than CIT group at 9 months and 1 year (90.48% vs 100%,P=0.043). The patients' satisfaction rate of dental implantation in TDPIT group was significantly higher than in CIT group (86.67% vs 53.33%, P=0.046). Using three-dimensional printing implant template can obtain better accuracy of implant, higher implant success rate and better patients' satisfaction than using conventional implant template. It is suitable for clinical application.

Risk Assessment for the Spread of Serratia marcescens Within Dental-Unit Waterline Systems Using Vermamoeba vermiformis.

Science.gov (United States)

Lal, Sham; Singhrao, Sim K; Achilles-Day, Undine E M; Morton, L H Glyn; Pearce, Mark; Crean, StJohn

2015-10-01

Vermamoeba vermiformis is associated with the biofilm ecology of dental-unit waterlines (DUWLs). This study investigated whether V. vermiformis is able to act as a vector for potentially pathogenic bacteria and so aid their dispersal within DUWL systems. Clinical dental water was initially examined for Legionella species by inoculating it onto Legionella selective-medium plates. The molecular identity/profile of the glassy colonies obtained indicated none of these isolates were Legionella species. During this work bacterial colonies were identified as a non-pigmented Serratia marcescens. As the water was from a clinical DUWL which had been treated with Alpron™, this prompted the question as to whether S. marcescens had developed resistance to the biocide. Exposure to Alpron™ indicated that this dental biocide was effective, under laboratory conditions, against S. marcescens at up to 1 × 10(8) colony forming units/millilitre (cfu/ml). V. vermiformis was cultured for 8 weeks on cells of S. marcescens and Escherichia coli. Subsequent electron microscopy showed that V. vermiformis grew equally well on S. marcescens and E. coli (P = 0.0001). Failure to detect the presence of S. marcescens within the encysted amoebae suggests that V. vermiformis is unlikely to act as a vector supporting the growth of this newly isolated, nosocomial bacterium.

Short and long-term career plans of final year dental students in the United Arab Emirates.

Science.gov (United States)

Rashid, Hazim H; Ghotane, Swapnil G; Abufanas, Salem H; Gallagher, Jennifer E

2013-08-13

New dental schools have been established to train dentists in many parts of the world. This study examines the future dental workforce from the first dental school in the United Arab Emirates [UAE]; the aim of this study was to explore the short and long-term career aspirations of the final year dental students in the UAE in relation to their demography. Final year dental students of the Ajman University's College of Dentistry (n=87) were invited to participate in a self-completion questionnaire survey. Descriptive analysis, chi-square tests, and binary logistic regression analysis were carried out on career aspirations using SPSS v20. Eighty-two percent of students (n=71) responded, the majority of whom were female (65%; n=46). Ethnicity was reported as: 'other Arab' (61%; n=43), 'Emirati' (17%, n=12), and 'Other' (21%, n=15). In the short-term, 41% (n=29) expressed a desire to work in government training centres, with Emirati students significantly more likely to do so (p=0.002). 'Financial stability' (80%; n=57) and 'gaining professional experience' (76%; n=54) emerged as the most important influences on their short-term career plans. The vast majority of students wished to specialise in dentistry (92%; n=65) in the longer term; logistic regression analysis revealed that the odds of specialising in the most popular specialties of Orthodontics and Oral and Maxillofacial Surgery were less for the 'Other' ethnic group when compared with 'Emirati' students (0.26; 95% CI 0.068-0.989; p=0.04). Almost three-quarters of the students overall (72%; n=51) intended to work full-time. 'High income/financial security' (97%; n=69), 'standard of living' (97%; n=69), 'work/life balance' (94%; n=67), and 'professional fulfilment' (87%; n=62) were reported by the students as the most influential items affecting their long-term professional career choices. The findings suggest that students aspire to make a long-term contribution to the profession and there is a high level of

Three-dimensional dental arch changes of patients submitted to orthodontic-surgical treatment for correction of Class II malocclusion

Directory of Open Access Journals (Sweden)

Adriano Porto Peixoto

2014-08-01

Full Text Available INTRODUCTION: This study assessed the three-dimensional changes in the dental arch of patients submitted to orthodontic-surgical treatment for correction of Class II malocclusions at three different periods. METHODS: Landmarks previously identified on upper and lower dental casts were digitized on a three-dimensional digitizer MicroScribe-3DX and stored in Excel worksheets in order to assess the width, length and depth of patient's dental arches. RESULTS: During orthodontic preparation, the maxillary and mandibular transverse dimensions measured at the premolar regions were increased and maintained throughout the follow-up period. Intercanine width was increased only in the upper arch during orthodontic preparation. Maxillary arch length was reduced during orthodontic finalization, only. Upper and lower arch depths were stable in the study periods. Differences between centroid and gingival changes suggested that upper and lower arch premolars buccaly proclined during the pre-surgical period. CONCLUSIONS: Maxillary and mandibular dental arches presented transverse expansion at premolar regions during preoperative orthodontic preparation, with a tendency towards buccal tipping. The transverse dimensions were not altered after surgery. No sagittal or vertical changes were observed during the follow-up periods.

Shisha Smoking Habit among Dental School Students in the United Arab Emirates: Enabling Factors and Barriers

Directory of Open Access Journals (Sweden)

Natheer H. Al-Rawi

2018-01-01

Full Text Available Objectives. The objective of the present study was to assess shisha smoking among dental school students in Sharjah, United Arab Emirates (UAE. In addition, the role of suggested barriers and enabling factors in shisha smoking was also evaluated. Methods. A cross-sectional questionnaire-based survey was conducted at the College of Dental Medicine, University of Sharjah, between February and May 2016. The questions were adapted from previously published water pipe smoking studies. The collected data were analyzed to identify the relationship between shisha smoking and sociodemographic characteristics. Relevant questions were further categorized as enabling factors and barriers for shisha smoking. Results. Three enabling questionnaire items related to social environment were significantly associated with an increased risk of being a current smoker. The most powerful is peer pressure (“friends smoke shisha”, which increased the odds ratio of shisha smoking 11.3 times, followed by smoker sibling with increase in odd ratio by 4.52 times, then the belief of social acceptance with increase in odd ratio by 4.31 times. Conclusion. Shisha smoking is a serious problem among university students. Any intervention program in the university curricula should consider teaching students that shisha is no less risky than cigarettes and is addictive.

Effect of three filler types on mechanical properties of dental composite

Directory of Open Access Journals (Sweden)

Pahlavan A.

2005-06-01

Full Text Available Statement of Problem: Despite the improvements achieved in the field of dental composites, their strength, longevity, and service life specially in high stress areas is not confirmed. Finding better fillers can be a promising step in this task. Purpose: The purpose of this study was to investigate the effect of the filler type on the mechanical properties of a new experimental dental composite and compare these with the properties of composite containing conventional glass filler. Materials and Methods: Experimental composites were prepared by mixing silane-treated fillers with monomers, composed of 70% Bis-GMA and 30% TEGDMA by weight. Fillers were different among the groups. Glass, leucite ceramic and lithium disilicate were prepared as different filler types. All three groups contained 73% wt filler. Comphorquinone and amines were chosen as photo initiator system. Post curing was done for all groups. Diametral tensile strength (DTS, flexural strength and flexural modulus were measured and compared among groups. Data were analyzed with SPSS package using one-way ANOVA test with P<0.05 as the limit of significance. Results: The results showed that the stronger ceramic fillers have positive effect on the flexural strength. Ceramic fillers increased the flexural strength significantly. No significant differences could be determined in DTS among the groups. Flexural modulus can be affected and increased by using ceramic fillers. Conclusion: Flexural strength is one of the most significant properties of restorative dental materials. The higher flexural strength and flexural modulus can be achieved by stronger ceramic fillers. Any further investigation in this field would be beneficial in the development of restorative dental materials.

Prosthetic rehabilitation with an implant-supported fixed prosthesis using computer-aided design and computer-aided manufacturing dental technology for a patient with a mandibulectomy: A clinical report.

Science.gov (United States)

Yoon, Hyung-In; Han, Jung-Suk

2016-02-01

The fabrication of dental prostheses with computer-aided design and computer-aided manufacturing shows acceptable marginal fits and favorable treatment outcomes. This clinical report describes the management of a patient who had undergone a mandibulectomy and received an implant-supported fixed prosthesis by using additive manufacturing for the framework and subtractive manufacturing for the monolithic zirconia restorations. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Antifungal efficacy of hydrogen peroxide in dental unit waterline disinfection.

Science.gov (United States)

Szymańska, Jolanta

2006-01-01

The concentration and composition of fungal flora in dental unit waterlines (DUWL) were evaluated. For this purpose, water samples from unit reservoirs and high-speed handpieces, and biofilm samples from the waterline walls from units were collected. Subsequently, analogous samples from DUWL were taken before and after disinfection using agent containing hydrogen peroxide. In the examined samples, the yeast-like fungi Candida albicans and Candida curvata were found. The following species of mould were also identified: Aspergillus amstelodami, Aspergillus fumigatus, Aspergillus glaucus group, Aspergillus (=Eurotium herbariorum) repens, Citromyces spp., Geotrichum candidum, Penicillium (glabrum) frequentans, Penicillium pusillum, Penicillium turolense and Sclerotium sclerotiorum (Sclerotinia sclerotiorum). Before disinfection, Candida curvata and Candida albicans constituted the greatest proportion of the total fungi in the reservoirs water; in the water of handpieces--Candida albicans and Aspergillus glaucus group; and in the biofilm samples--Aspergillus glaucus group and Candida albicans. After disinfection, in all 3 kinds of samples, Candida albicans prevailed, constituting from 31.2-85.7 % of the total fungi. The application of agent containing hydrogen peroxide caused a significant decrease both in the number of total fungi and individual fungal species, which confirms the product effectiveness in fungal decontamination of DUWL.

Multidisciplinary approach of ectodermal dysplasia with implant retained fixed prosthesis

Directory of Open Access Journals (Sweden)

Vishnu Priya

2013-01-01

Full Text Available Ectodermal dysplasia represents a group of rare inherited conditions in which two or more ectodermally derived anatomical structures fail to develop. Early dental intervention can improve patient′s appearance, thereby minimizing associated emotional and psychological problems in these patients. Treatment requires a teamwork by medical personnel along with dental professionals of various specialties. Here, a rare case of a young female patient is presented with prosthetic management with implant supported fixed partial denture.

Recent trends in dental visits and private dental insurance, 1989 and 1999.

Science.gov (United States)

Wall, Thomas P; Brown, L Jackson

2003-05-01

This article describes recent trends in dental visits and private dental insurance in the United States. This study is based on the analyses of data regarding dental visits and private dental insurance among the population 2 years of age or older from the 1989 and 1999 National Health Interview Surveys. Overall, the percentage of the population with a dental visit rose from 57.2 percent in 1989 to 64.1 percent in 1999, while the percentage with private dental insurance fell from 40.5 percent to 35.2 percent. Although a higher percentage of people with private dental insurance reported having a dental visit than did those without private dental insurance in both years, the increase from 1989 to 1999 in the percentage of those with a visit was larger among the uninsured. If this trend persists, a smaller portion of practicing dentist's clientele will be insured. This may affect demand for services, as well as front office operations.

Design of Complete Dentures by Adopting CAD Developed for Fixed Prostheses.

Science.gov (United States)

Li, Yanfeng; Han, Weili; Cao, Jing; Iv, Yuan; Zhang, Yue; Han, Yishi; Shen, Yi; Ma, Zheng; Liu, Huanyue

2018-02-01

The demand for complete dentures is expected to increase worldwide, but complete dentures are mainly designed and fabricated manually involving a broad series of clinical and laboratory procedures. Therefore, the quality of complete dentures largely depends on the skills of the dentist and technician, leading to difficulty in quality control. Computer-aided design and manufacturing (CAD/CAM) has been used to design and fabricate various dental restorations including dental inlays, veneers, crowns, partial crowns, and fixed partial dentures (FPDs). It has been envisioned that the application of CAD/CAM technology could reduce intensive clinical/laboratory work for the fabrication of complete dentures; however, CAD/CAM is seldom used to fabricate complete dentures due to the lack of suitable CAD software to design virtual complete dentures although the CAM techniques are in a much advanced stage. Here we report the successful design of virtual complete dentures using CAD software of 3Shape Dental System 2012, which was developed for designing fixed prostheses instead of complete dentures. Our results demonstrated that complete dentures could be successfully designed by the combination of two modeling processes, single coping and full anatomical FPD, available in the 3Shape Dental System 2012. © 2016 by the American College of Prosthodontists.

Evaluation of the shielding of dental X-rays units

International Nuclear Information System (INIS)

Medrano, E.; Vega C, H. R.; Letechipia de L, C.; Hernandez D, V. M.; Salas L, M. A.

2014-08-01

The capacity of the walls of the dental radio-diagnostic rooms has been determined, to diminish the dose levels during the use of the X-rays equipment s. The study was carried out in the Dentistry Academic Unit of the campus Siglo X XI of the Universidad Autonoma de Zacatecas. The X-rays equipment s are a learning tool for the dentistry students and they are also used for offering health services to the population; for this reason is important to verify that the dose levels outside of the room walls are safe. During the evaluation process were used conservative approaches without prejudice of the thickness necessary in benefit of the radiological protection. Of the evaluation was found that all the walls satisfy their function thoroughly like barriers against the X-rays. (Author)

All-ceramic or metal-ceramic tooth-supported fixed dental prostheses (FDPs)? A systematic review of the survival and complication rates. Part II: Multiple-unit FDPs.

Science.gov (United States)

Pjetursson, Bjarni Elvar; Sailer, Irena; Makarov, Nikolay Alexandrovich; Zwahlen, Marcel; Thoma, Daniel Stefan

2015-06-01

To assess the 5-year survival of metal-ceramic and all-ceramic tooth-supported fixed dental prostheses (FDPs) and to describe the incidence of biological, technical and esthetic complications. Medline (PubMed), Embase and Cochrane Central Register of Controlled Trials (CENTRAL) searches (2006-2013) were performed for clinical studies focusing on tooth-supported FDPs with a mean follow-up of at least 3 years. This was complemented by an additional hand search and the inclusion of 10 studies from a previous systematic review [1]. Survival and complication rates were analyzed using robust Poisson's regression models to obtain summary estimates of 5-year proportions. Forty studies reporting on 1796 metal-ceramic and 1110 all-ceramic FDPs fulfilled the inclusion criteria. Meta-analysis of the included studies indicated an estimated 5-year survival rate of metal-ceramic FDPs of 94.4% (95% CI: 91.2-96.5%). The estimated survival rate of reinforced glass ceramic FDPs was 89.1% (95% CI: 80.4-94.0%), the survival rate of glass-infiltrated alumina FDPs was 86.2% (95% CI: 69.3-94.2%) and the survival rate of densely sintered zirconia FDPs was 90.4% (95% CI: 84.8-94.0%) in 5 years of function. Even though the survival rate of all-ceramic FDPs was lower than for metal-ceramic FDPs, the differences did not reach statistical significance except for the glass-infiltrated alumina FDPs (p=0.05). A significantly higher incidence of caries in abutment teeth was observed for densely sintered zirconia FDPs compared to metal-ceramic FDPs. Significantly more framework fractures were reported for reinforced glass ceramic FDPs (8.0%) and glass-infiltrated alumina FDPs (12.9%) compared to metal-ceramic FDPs (0.6%) and densely sintered zirconia FDPs (1.9%) in 5 years in function. However, the incidence of ceramic fractures and loss of retention was significantly (p=0.018 and 0.028 respectively) higher for densely sintered zirconia FDPs compared to all other types of FDPs. Survival rates of all

Quality improvement program reduces perioperative dental injuries – A review of 64,718 anesthetic patients

Directory of Open Access Journals (Sweden)

Yi-Wei Kuo

2016-12-01

Conclusion: Dental injury incidence was significantly reduced and remained at low levels after implementation of the quality improvement program. We suggest the implementation of a standardized dental examination into the preoperative evaluation system adding pathologic teeth fixed or protected devices to minimize dental injury associated with anesthesia.

Dental Environmental Noise Evaluation and Health Risk Model Construction to Dental Professionals.

Science.gov (United States)

Ma, Kuen Wai; Wong, Hai Ming; Mak, Cheuk Ming

2017-09-19

Occupational noise is unavoidably produced from dental equipment, building facilities, and human voices in the dental environment. The purpose of this study was to investigate the effect of occupational noise exposure on the dental professionals' health condition. The psychoacoustics approach noise exposure assessment followed by the health risk assessment was carried on at the paediatric dentistry clinic and the dental laboratory in the Prince Philip Dental Hospital of Hong Kong. The A-weighted equivalent sound level, total loudness, and sharpness values were statistically significantly higher for the noise at the laboratory than that at the clinic. The degree of perceived influences and sharpness of noise were found to have the impacts on the dental professionals' working performance and health. Moreover, the risk of having a bad hearing state would a have 26% and 31% higher chance for a unit increment of the short-term and long-term impact scores, respectively. The dental professionals with the service length more than 10 years and the daily working hours of more than eight showed the highest risk to their hearing state. The worse the hearing state was, the worse the health state was found for the dental professionals. Also, the risk of dissatisfaction would be increased by 4.41 and 1.22 times for those who worked at the laboratory and a unit increment of the long-term impact score. The constructed health risk mode with the scientific and statistical evidence is hence important for the future noise management of environmental improvement.

Assessing the irradiance delivered from light-curing units in private dental offices in Jordan.

Science.gov (United States)

Maghaireh, Ghada A; Alzraikat, Hanan; Taha, Nessrin A

2013-08-01

The authors conducted a study to examine the irradiance from light-curing units (LCUs) used in dental offices in Jordan. Two of the authors visited 295 private dental offices (15 percent) in Jordan and collected the following information about the LCUs: age, type (quartz-tungsten-halogen or light-emitting diode), date of last maintenance, type of maintenance, last date of use, number of times used during the day, availability of a radiometer, exposure time for each resin-based composite increment, size of light-curing tips and presence of resin-based composite on the tips. The authors used a radiometer to measure the irradiance from the LCUs. They used linear regression with stepwise correlation for the statistical analysis. The authors set the minimum acceptable irradiance at 300 milliwatts/square centimeter. The mean irradiance of the 295 LCUs examined was 361 mW/cm(2), and 136 LCUs (46.1 percent) delivered an irradiance of less than 300 mW/cm(2). The unit's age, type and presence of resin-based composite on the light-curing tips had a significant effect on the irradiance (P ≤ .001). Only 37 of the 141 quartz-tungsten-halogen units (26.2 percent) and 122 of the 154 light-emitting diode units (79.2 percent) delivered at least 300 mW/cm(2). Resin contamination on the light-curing tips had a significant effect on the irradiance delivered. The irradiance from the LCUs decreased with use. Practical Implications. The irradiance from many of the units in this study was less than 300 mW/cm(2), which may affect the quality of resin-based composite restorations. Dentists should monitor the performance of the LCUs in their offices weekly.

Composition, Production Rate and Management of Dental Solid Waste in 2017 in Birjand, Iran

Directory of Open Access Journals (Sweden)

Habibe Momeni

2018-01-01

Full Text Available Background: The presence of toxic and pathogenic agents in the dental waste products has made it to be classified as “hazardous waste.” Objective: To assess dental waste production rate and composition and approaches used to manage these waste products in 2017 in Birjand, Iran. Methods: 48 dental clinics were evaluated in two months of 2017. Sampling was performed from each clinic 3 times a week. Samples were manually divided into 5 categories of chemical-pharmaceutical, infectious, semi-household, sharp and cutting materials, and toxic waste products, and weighed. A checklist containing 25 questions was used to evaluate the aspects of waste management in dental clinics. Results: The total amount of waste products generated in dental clinics was 7848.02 kg/ year in which semi-household waste had the highest quantity (4263.411 kg/year and toxic waste had the lowest quantity (9.275 kg/year. Components with the highest amounts in dentistry waste products were nylon gloves (16.7%, paper and cardboard (13.4%, latex gloves (10.8%, and pharmaceuticals (10.2%. Waste separation was restricted to sharp and cutting waste. More than half (57% of dental units were equipped with amalgam filter. Fixing solutions were directly discharged to sewage in 48.6% of clinics. There was no program to reduce waste generation in 54% of the clinics. Autoclave was the main tool for sterilizing dental instruments. Conclusion: This study showed a remarkable share of recyclable materials in the composition of dental waste and lack of special approach to manage waste in dental clinics. It is necessary to plan for minimizing generation of, separating, and recycling waste at source.

Composition, Production Rate and Management of Dental Solid Waste in 2017 in Birjand, Iran.

Science.gov (United States)

Momeni, Habibe; Tabatabaei Fard, Seyyedeh Fatemeh; Arefinejad, Aliye; Afzali, Afsane; Talebi, Farkhonde; Rahmanpour Salmani, Elham

2018-01-01

The presence of toxic and pathogenic agents in the dental waste products has made it to be classified as "hazardous waste." To assess dental waste production rate and composition and approaches used to manage these waste products in 2017 in Birjand, Iran. 48 dental clinics were evaluated in two months of 2017. Sampling was performed from each clinic 3 times a week. Samples were manually divided into 5 categories of chemical-pharmaceutical, infectious, semi-household, sharp and cutting materials, and toxic waste products, and weighed. A checklist containing 25 questions was used to evaluate the aspects of waste management in dental clinics. The total amount of waste products generated in dental clinics was 7848.02 kg/ year in which semi-household waste had the highest quantity (4263.411 kg/year) and toxic waste had the lowest quantity (9.275 kg/year). Components with the highest amounts in dentistry waste products were nylon gloves (16.7%), paper and cardboard (13.4%), latex gloves (10.8%), and pharmaceuticals (10.2%). Waste separation was restricted to sharp and cutting waste. More than half (57%) of dental units were equipped with amalgam filter. Fixing solutions were directly discharged to sewage in 48.6% of clinics. There was no program to reduce waste generation in 54% of the clinics. Autoclave was the main tool for sterilizing dental instruments. This study showed a remarkable share of recyclable materials in the composition of dental waste and lack of special approach to manage waste in dental clinics. It is necessary to plan for minimizing generation of, separating, and recycling waste at source.

Organisational aspects of dental practices: do dental students think like patients or like general dental practitioners?

Science.gov (United States)

Sonneveld, R E; Brands, W G; Bronkhorst, E M; Welie, J V M; Truin, G J

2013-02-01

In view of transparency in health care, the widespread desire for more patient-centred care, and in an attempt to facilitate educational programmes that effectively respond to these changes, two research questions are formulated: (i) How do dental students rate the importance of various organisational aspects of dental practices compared with dental patients and general dental practitioners (GDPs), and what prescripts, defined as specific operational responsibilities of GDPs in these matters, do dental students propose? and (ii) In doing so, do students resemble patients or GDPs? In two survey studies, dental students (n = 198), patients (n = 3127) and GDPs (n = 303) were asked to rate by questionnaire the importance of 41 organisational aspects of a general dental practice and proposed specific operational responsibilities ('prescripts'). Seven of 41 aspects were rated as important by the majority of the students. Although in a different rank order, three aspects were predominantly selected by all three groups: continuing education, accessibility by telephone and Dutch-speaking GDP. For most aspects, significant differences were found between the prescripts proposed by students and those proposed by patients, and few differences were found between students and GDPs. The findings do not permit the general conclusion that the views of dental students resemble those of patients or GPDs. Looking at the overall rank order, the three respondent groups showed a great resemblance although significant differences were found for specific aspects. With regard to the proposed prescripts, students showed realistic views and the majority wants to participate in continuing education and work with protocols and guidelines. In this, they tend to resemble GDPs more than they resemble patients. © 2012 John Wiley & Sons A/S.

Does Bruxism Contribute to Dental Implant Failure? A Systematic Review and Meta-Analysis.

Science.gov (United States)

Zhou, Yi; Gao, Jinxia; Luo, Le; Wang, Yining

2016-04-01

Bruxism was usually considered as a contraindication for oral implanting. The causal relationship between bruxism and dental implant failure was remained controversial in existing literatures. This meta-analysis was performed to investigate the relationship between them. This review conducted an electronic systematic literature search in MEDLINE (PubMed) and EmBase in November 2013 without time and language restrictions. Meanwhile, a hand searching for all the relevant references of included studies was also conducted. Study information extraction and methodological quality assessments were accomplished by two reviewers independently. A discussion ensued if any disagreement occurred, and unresolved issues were solved by consulting a third reviewer. Methodological quality was assessed by using the Newcastle-Ottawa Scale tool. Odds ratio (OR) with 95% confidence interval (CI) was pooled to estimate the relative effect of bruxism on dental implant failures. Fixed effects model was used initially; if the heterogeneity was high, random effects model was chosen for meta-analysis. Statistical analyses were carried out by using Review Manager 5.1. In this meta-analysis review, extracted data were classified into two groups based on different units. Units were based on the number of prostheses (group A) and the number of patients (group B). In group A, the total pooled OR of bruxers versus nonbruxers for all subgroups was 4.72 (95% CI: 2.66-8.36, p = .07). In group B, the total pooled OR of bruxers versus nonbruxers for all subgroups was 3.83 (95% CI: 2.12-6.94, p = .22). This meta-analysis was performed to evaluate the relationship between bruxism and dental implant failure. In contrast to nonbruxers, prostheses in bruxers had a higher failure rate. It suggests that bruxism is a contributing factor of causing the occurrence of dental implant technical/biological complications and plays a role in dental implant failure. © 2015 Wiley Periodicals, Inc.

Systematic literature review of digital three-dimensional superimposition techniques to create virtual dental patients.

Science.gov (United States)

Joda, Tim; Brägger, Urs; Gallucci, German

2015-01-01

Digital developments have led to the opportunity to compose simulated patient models based on three-dimensional (3D) skeletal, facial, and dental imaging. The aim of this systematic review is to provide an update on the current knowledge, to report on the technical progress in the field of 3D virtual patient science, and to identify further research needs to accomplish clinical translation. Searches were performed electronically (MEDLINE and OVID) and manually up to March 2014 for studies of 3D fusion imaging to create a virtual dental patient. Inclusion criteria were limited to human studies reporting on the technical protocol for superimposition of at least two different 3D data sets and medical field of interest. Of the 403 titles originally retrieved, 51 abstracts and, subsequently, 21 full texts were selected for review. Of the 21 full texts, 18 studies were included in the systematic review. Most of the investigations were designed as feasibility studies. Three different types of 3D data were identified for simulation: facial skeleton, extraoral soft tissue, and dentition. A total of 112 patients were investigated in the development of 3D virtual models. Superimposition of data on the facial skeleton, soft tissue, and/or dentition is a feasible technique to create a virtual patient under static conditions. Three-dimensional image fusion is of interest and importance in all fields of dental medicine. Future research should focus on the real-time replication of a human head, including dynamic movements, capturing data in a single step.

A comparative finite elemental analysis of glass abutment supported and unsupported cantilever fixed partial denture.

Science.gov (United States)

Ramakrishaniah, Ravikumar; Al Kheraif, Abdulaziz A; Elsharawy, Mohamed A; Alsaleh, Ayman K; Ismail Mohamed, Karem M; Rehman, Ihtesham Ur

2015-05-01

The purpose of this study was to investigate and compare the load distribution and displacement of cantilever prostheses with and without glass abutment by three dimensional finite element analysis. Micro-computed tomography was used to study the relationship between the glass abutment and the ridge. The external surface of the maxilla was scanned, and a simplified finite element model was constructed. The ZX-27 glass abutment and the maxillary first and second premolars were created and modified. The solid model of the three-unit cantilever fixed partial denture was scanned, and the fitting surface was modified with reference to the created abutments using the 3D CAD system. The finite element analysis was completed in ANSYS. The fit and total gap volume between the glass abutment and dental model were determined by Skyscan 1173 high-energy spiral micro-CT scan. The results of the finite element analysis in this study showed that the cantilever prosthesis supported by the glass abutment demonstrated significantly less stress on the terminal abutment and overall deformation of the prosthesis under vertical and oblique load. Micro-computed tomography determined a gap volume of 6.74162 mm(3). By contacting the mucosa, glass abutments transfer some amount of masticatory load to the residual alveolar ridge, thereby preventing damage to the periodontal microstructures of the terminal abutment. The passive contact of the glass abutment with the mucosa not only preserves the health of the mucosa covering the ridge but also permits easy cleaning. It is possible to increase the success rate of cantilever FPDs by supporting the cantilevered pontic with glass abutments. Copyright © 2015 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

New Design for Rapid Prototyping of Digital Master Casts for Multiple Dental Implant Restorations.

Directory of Open Access Journals (Sweden)

Luis Romero

Full Text Available This study proposes the replacement of all the physical devices used in the manufacturing of conventional prostheses through the use of digital tools, such as 3D scanners, CAD design software, 3D implants files, rapid prototyping machines or reverse engineering software, in order to develop laboratory work models from which to finish coatings for dental prostheses. Different types of dental prosthetic structures are used, which were adjusted by a non-rotatory threaded fixing system.From a digital process, the relative positions of dental implants, soft tissue and adjacent teeth of edentulous or partially edentulous patients has been captured, and a maser working model which accurately replicates data relating to the patients oral cavity has been through treatment of three-dimensional digital data.Compared with the conventional master cast, the results show a significant cost savings in attachments, as well as an increase in the quality of reproduction and accuracy of the master cast, with the consequent reduction in the number of patient consultation visits. The combination of software and hardware three-dimensional tools allows the optimization of the planning of dental implant-supported rehabilitations protocol, improving the predictability of clinical treatments and the production cost savings of master casts for restorations upon implants.

New Design for Rapid Prototyping of Digital Master Casts for Multiple Dental Implant Restorations.

Science.gov (United States)

Romero, Luis; Jiménez, Mariano; Espinosa, María Del Mar; Domínguez, Manuel

2015-01-01

This study proposes the replacement of all the physical devices used in the manufacturing of conventional prostheses through the use of digital tools, such as 3D scanners, CAD design software, 3D implants files, rapid prototyping machines or reverse engineering software, in order to develop laboratory work models from which to finish coatings for dental prostheses. Different types of dental prosthetic structures are used, which were adjusted by a non-rotatory threaded fixing system. From a digital process, the relative positions of dental implants, soft tissue and adjacent teeth of edentulous or partially edentulous patients has been captured, and a maser working model which accurately replicates data relating to the patients oral cavity has been through treatment of three-dimensional digital data. Compared with the conventional master cast, the results show a significant cost savings in attachments, as well as an increase in the quality of reproduction and accuracy of the master cast, with the consequent reduction in the number of patient consultation visits. The combination of software and hardware three-dimensional tools allows the optimization of the planning of dental implant-supported rehabilitations protocol, improving the predictability of clinical treatments and the production cost savings of master casts for restorations upon implants.

New Design for Rapid Prototyping of Digital Master Casts for Multiple Dental Implant Restorations

Science.gov (United States)

Romero, Luis; Jiménez, Mariano; Espinosa, María del Mar; Domínguez, Manuel

2015-01-01

Aim This study proposes the replacement of all the physical devices used in the manufacturing of conventional prostheses through the use of digital tools, such as 3D scanners, CAD design software, 3D implants files, rapid prototyping machines or reverse engineering software, in order to develop laboratory work models from which to finish coatings for dental prostheses. Different types of dental prosthetic structures are used, which were adjusted by a non-rotatory threaded fixing system. Method From a digital process, the relative positions of dental implants, soft tissue and adjacent teeth of edentulous or partially edentulous patients has been captured, and a maser working model which accurately replicates data relating to the patients oral cavity has been through treatment of three-dimensional digital data. Results Compared with the conventional master cast, the results show a significant cost savings in attachments, as well as an increase in the quality of reproduction and accuracy of the master cast, with the consequent reduction in the number of patient consultation visits. The combination of software and hardware three-dimensional tools allows the optimization of the planning of dental implant-supported rehabilitations protocol, improving the predictability of clinical treatments and the production cost savings of master casts for restorations upon implants. PMID:26696528

Skeletal, dental and soft tissue changes in Class III patients treated with fixed appliances and lower premolar extractions.

Science.gov (United States)

Abu Alhaija, Elham S J; Al-Khateeb, Susan N

2011-05-01

Mild Class III malocciusions can be treated by upper incisor proclination and lower incisor retroclination following extraction of the lower first premolars. To compare the skeletal, dental and soft tissue changes in Class III patients treated with fixed appliances, Class III traction and lower first premolar extractions with the changes in a group of untreated Class III patients. The Treatment group consisted of 30 Class III patients (Mean age 13.69 +/- 1.48 years) who were treated by upper and lower fixed appliances, Class III intermaxillary traction and lower first premolar extractions for 2.88 +/- 1.12 years. The Control group consisted of 20 untreated Class III patients (Mean age 13.51 +/- 0.95) matched for age and gender. The T1 to T2 changes in the treated and untreated groups were compared using a paired t-test while differences between the two groups were compared with an independent t-test. During treatment, the upper incisors were proclined about 1 degree and the lower incisors were retroclined 8 degrees. Small, but statistically significant changes in SNB, Wits and the overlying soft tissues accompanied the changes in incisor inclination. At the end of treatment a positive overbite and overjet were achieved. The increase in lower facial height in the Treatment group was comparable with the change in the Control group. A range of mild to moderate Class III malocclusions can be treated by dentoalveolar compensation.

Properties and Clinical Application of Three Types of Dental Glass-Ceramics and Ceramics for CAD-CAM Technologies

Science.gov (United States)

Ritzberger, Christian; Apel, Elke; Höland, Wolfram; Peschke, Arnd; Rheinberger, Volker M.

2010-01-01

The main properties (mechanical, thermal and chemical) and clinical application for dental restoration are demonstrated for three types of glass-ceramics and sintered polycrystalline ceramic produced by Ivoclar Vivadent AG. Two types of glass-ceramics are derived from the leucite-type and the lithium disilicate-type. The third type of dental materials represents a ZrO2 ceramic. CAD/CAM technology is a procedure to manufacture dental ceramic restoration. Leucite-type glass-ceramics demonstrate high translucency, preferable optical/mechanical properties and an application as dental inlays, onlays and crowns. Based on an improvement of the mechanical parameters, specially the strength and toughness, the lithium disilicate glass-ceramics are used as crowns; applying a procedure to machine an intermediate product and producing the final glass-ceramic by an additional heat treatment. Small dental bridges of lithium disilicate glass-ceramic were fabricated using a molding technology. ZrO2 ceramics show high toughness and strength and were veneered with fluoroapatite glass-ceramic. Machining is possible with a porous intermediate product.

Evaluation of two methods in controlling dental treatment water contamination.

Science.gov (United States)

Bansal, Ritu; Puttaiah, Raghunath; Harris, Robert; Reddy, Anil

2011-03-01

Dental unit water systems are contaminated with biofilms that amplify bacterial counts in dental treatment water in excess of a million colony forming units per milliliter (cfu/ml). The Centers for Disease Control and Prevention and the American Dental Association have agreed that the maximum allowable contamination of dental treatment water not exceed 500 cfu/ml. This study was conducted to evaluate two protocols in controlling contamination of dental unit water systems and dental treatment water. Both methods used an antimicrobial self-dissolving chlorine dioxide (ClO₂) tablet at a high concentration (50 ppm) to shock the dental unit water system biofilms initially followed by periodic exposure. To treat dental treatment source water for patient care, 3 parts per million (ppm) ClO₂ in municipal/tap water was compared to use of a citrus botanical extract dissolved in municipal water. Heterotrophic microbial counts of effluent water and laser scanning confocal microscopy were performed to evaluate effects of the two treatments. Results from this study indicated that both treatments were effective in controlling biofilm contamination and reducing heterotrophic plate counts Contemp Dent Pract 2011;12(2):73-83. Source of support: Nil Conflict of interest: None declared.

Saliva composition in three selected groups with normal stimulated salivary flow rates, but yet major differences in caries experience and dental erosion.

Science.gov (United States)

Bardow, Allan; Lykkeaa, Joan; Qvist, Vibeke; Ekstrand, Kim; Twetman, Svante; Fiehn, Niels-Erik

2014-08-01

It was hypothesized that, by comparing matched subjects with major differences in these dental diseases, but yet normal saliva flow rates, it would be possible to obtain data on the effect of saliva composition on dental disease isolated from the effect of the flow rate. Thus, the aim of the study was to compare the major physicochemical characteristics of stimulated whole saliva in three groups of 85 subjects, each with normal saliva flow rates and at least 24 remaining teeth. A group with very little dental disease (healthy), a group with dental erosion (erosion) and a group with very high caries experience (caries) were chosen. Furthermore, the aim was to determine whether differences among groups could also be found on an individual level. Although it was not possible to retrieve three groups whose members were completely identical, the present study points in the direction that, on a group level, subjects with very little dental disease seemed to have a more favorable physicochemical saliva composition with respect to higher calcium, phosphate, bicarbonate, pH, degree of saturation with respect to hydroxyapatite and a lower critical pH (p dental erosion (p dental caries and erosion in single individuals.

Diagnostic Imaging for Dental Implant Therapy

Directory of Open Access Journals (Sweden)

Aishwarya Nagarajan

2014-01-01

Full Text Available Dental implant is a device made of alloplastic (foreign material implanted into the jaw bone beneath the mucosal layer to support a fixed or removable dental prosthesis. Dental implants are gaining immense popularity and wide acceptance because they not only replace lost teeth but also provide permanent restorations that do not interfere with oral function or speech or compromise the self-esteem of a patient. Appropriate treatment planning for replacement of lost teeth is required and imaging plays a pivotal role to ensure a satisfactory outcome. The development of pre-surgical imaging techniques and surgical templates helps the dentist place the implants with relative ease. This article focuses on various types of imaging modalities that have a pivotal role in implant therapy.

Audit to assess the quality of communication between operators and technicians in a fixed prosthodontic laboratory: educational and training implications.

Science.gov (United States)

Dickie, J; Shearer, A C; Ricketts, D N J

2014-02-01

This audit aimed to assess the quality of communication between dental students/qualified dentists and dental technicians, increase the percentage of satisfactorily completed laboratory prescriptions and reduce the number of errors that can result from poor communication. A subsidiary aim was to educate students and staff in this respect. An audit of laboratory prescription completion was conducted within Dundee Dental Hospital. Four hundred and eighteen prescriptions for indirect fixed restorations completed by dental undergraduates and qualified staff were audited over a three month period (first audit cycle). Educational reminders on laboratory prescriptions were then provided to undergraduates and qualified staff, a further three hundred and twenty-two prescriptions were audited (second audit cycle) and compared with the first cycle. Satisfactorily completed prescriptions increased from 28% to 43% following basic educational intervention. However, this percentage still signifies a poor level of completion and the need for improvement. Some aspects of the prescription were completed better than others, but overall the standard remained poor with a significant number failing to comply with guidelines set by the UK General Dental Council, the European Union's Medical Devices Directive and the British Society for Restorative Dentistry (BSRD). Further undergraduate and staff training on laboratory prescription writing will be necessary through staff training events and developments in the undergraduate curriculum. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Placement of fin type dental implant in three different surgical situations of alveolar bone

Directory of Open Access Journals (Sweden)

Coen Pramono D

2007-03-01

Full Text Available Three different dental implant placements according to surgical implant bed situations were observed in its bone integration 3 months after dental implant insertion. This observation was done on implant system which has plateau or fin system. Elf implants were placed in the upper jaw in two patients. In case one, two implants were inserted immediately after tooth extraction, and the other six implants were placed in the alveolar crest regions in delayed implantation or in which the teeth had been extracted over 6 months of period. In case two, three implants were inserted in the post trauma region in the anterior maxilla, which the labial plate had been lost and reconstructed with bone grafting procedure using a mixture of alloplastic and autogenous bones. The alveolar reconstruction was needed to be performed due to only thin alveolar crest width was left intact. All of those implants observed showed in good integration.

Critical Thinking Skills of United States Dental Hygiene Students

Science.gov (United States)

Notgarnie, Howard M.

2011-01-01

The complexity of decision-making in dental hygienists' practice requires critical thinking skills. Interest in raising educational standards for entry into the dental hygiene profession is a response to the demand for enhanced professional skills, including critical thinking skills. No studies found in the course of literature review compared…

Psychometric properties of Spanish-language adult dental fear measures

Directory of Open Access Journals (Sweden)

Heaton Lisa J

2008-05-01

Full Text Available Abstract Background It would be useful to have psychometrically-sound measures of dental fear for Hispanics, who comprise the largest ethnic minority in the United States. We report on the psychometric properties of Spanish-language versions of two common adult measures of dental fear (Modified Dental Anxiety Scale, MDAS; Dental Fear Survey, DFS, as well as a measure of fear of dental injections (Needle Survey, NS. Methods Spanish versions of the measures were administered to 213 adults attending Hispanic cultural festivals, 31 students (who took the questionnaire twice, for test-retest reliability, and 100 patients at a dental clinic. We also administered the questionnaire to 136 English-speaking adults at the Hispanic festivals and 58 English-speaking students at the same college where we recruited the Spanish-speaking students, to compare the performance of the English and Spanish measures in the same populations. Results The internal reliabilities of the Spanish MDAS ranged from 0.80 to 0.85. Values for the DFS ranged from 0.92 to 0.96, and values for the NS ranged from 0.92 to 0.94. The test-retest reliabilities (intra-class correlations for the three measures were 0.69, 0.86, and 0.94 for the MDAS, DFS, and NS, respectively. The three measures showed moderate correlations with one another in all three samples, providing evidence for construct validity. Patients with higher scores on the measures were rated as being more anxious during dental procedures. Similar internal reliabilities and correlations were found in the English-version analyses. The test-retest values were also similar in the English students for the DFS and NS; however, the English test-retest value for the MDAS was better than that found in the Spanish students. Conclusion We found evidence for the internal reliability, construct validity, and criterion validity for the Spanish versions of the three measures, and evidence for the test-retest reliability of the Spanish

Primary prevention of dental erosion by calcium and fluoride: a systematic review.

Science.gov (United States)

Zini, A; Krivoroutski, Y; Vered, Y

2014-02-01

Overviews of the current literature only provide summaries of existing relevant preventive strategies for dental erosion. To perform a systematic review according to the quantitative meta-analysis method of the scientific literature on prevention of dental erosion. The focused question will address primary prevention of dental erosion by calcium and fluoride. Randomized clinical trials (RCTs) regarding dental erosion prevention. The search included five databases: Embase, Cochrane database of systematic reviews, PubMed (MEDLINE), FDA publication and Berman medical library of the Hebrew University. The search included data in the English language, with effect on preventing dental erosion always presented as mean enamel loss and measured by profilometer. Statistical meta-analysis was performed by StatsDirect program and PEPI statistical software. Fixed- and random-effect models were used to analyse the data. Heterogeneity tests were employed to validate the fixed-effect model assumption. A total of 475 articles on dental erosion prevention were located. A four-stage selection process was employed, and 10 RCT articles were found to be suitable for meta-analysis. The number of studies on prevention of dental erosion maintaining standards of evidence-based dentistry remains insufficient to reach any definite conclusions. The focused questions of this review cannot be addressed according to the existing literature. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Diagnostic reference levels in intraoral dental radiography in Korea

International Nuclear Information System (INIS)

Kim, Eun Kyung; Han, Won Jeong; Choi, Jin Woo; Jung, Yun Hoa; Yoon, Suk Ja; Lee, Jae Seo

2012-01-01

The objectives of this study were to survey the radiographic exposure parameters, to measure the patient doses for intraoral dental radiography nationwide, and thus to establish the diagnostic reference levels (DRLs) in intraoral dental X-ray examination in Korea. One hundred two intraoral dental radiographic machines from all regions of South Korea were selected for this study. Radiographic exposure parameters, size of hospital, type of image receptor system, installation duration of machine, and type of dental X-ray machine were documented. Patient entrance doses (PED) and dose-area products (DAP) were measured three times at the end of the exit cone of the X-ray unit with a DAP meter (DIAMENTOR M4-KDK, PTW, Freiburg, Germany) for adult mandibular molar intraoral dental radiography, and corrections were made for room temperature and pressure. Measured PED and DAP were averaged and compared according to the size of hospital, type of image receptor system, installation duration, and type of dental X-ray machine. The mean exposure parameters were 62.6 kVp, 7.9 mA, and 0.5 second for adult mandibular molar intraoral dental radiography. The mean patient dose was 2.11 mGy (PED) and 59.4 mGycm2 (DAP) and the third quartile one 3.07 mGy (PED) and 87.4 mGycm 2 (DAP). Doses at university dental hospitals were lower than those at dental clinics (p 2 (DAP) as the DRLs in adult mandibular molar intraoral dental radiography in Korea.

Dental caries among children visiting a mobile dental clinic in South Central Kentucky: a pooled cross-sectional study.

Science.gov (United States)

Dawkins, Erika; Michimi, Akihiko; Ellis-Griffith, Gregory; Peterson, Tina; Carter, Daniel; English, Gary

2013-05-02

Dental caries is one of the most common chronic childhood diseases affecting a large portion of children in the United States. The prevalence of childhood dental caries in Kentucky is among the highest in the nation. The purposes of this study are to (1) compare sociodemographic differences between caries and no caries groups and (2) investigate factors associated with untreated dental caries among children who visited a mobile dental clinic in South Central Kentucky. Study subjects were children aged 6 to 15 years who participated in the school-based dental sealant program through the mobile dental clinic operated by the Institute for Rural Health at Western Kentucky University between September 2006 and May 2011 (n = 2,453). Descriptive statistics were calculated for sociodemographic factors (age, gender, race/ethnicity, insurance status, and urban versus rural residential location) and caries status. We used chi-square tests to compare sociodemographic differences of children stratified by caries and no caries status as well as three levels of caries severity. We developed a logistic regression model to investigate factors associated with untreated dental caries while controlling for sociodemographic characteristics. The proportion of children having untreated dental caries was 49.7% and the mean number of untreated dental caries was 2.0. The proportion of untreated dental caries was higher in older children, children with no insurance and living in rural residential locations, and caries severity was also higher in these groups. Odds ratio indicated that older ages, not having private insurance (having only public, government-sponsored insurance or no insurance at all) and rural residential location were associated with having untreated dental caries after controlling for sociodemographic characteristics of children. Untreated dental caries was more likely to be present in older children living in rural areas without insurance. Health interventionists may use

The INCENTIVE protocol: an evaluation of the organisation and delivery of NHS dental healthcare to patients—innovation in the commissioning of primary dental care service delivery and organisation in the UK

Science.gov (United States)

Pavitt, Sue H; Baxter, Paul D; Brunton, Paul A; Douglas, Gail; Edlin, Richard; Gibson, Barry J; Godson, Jenny; Hall, Melanie; Porritt, Jenny; Robinson, Peter G; Vinall, Karen; Hulme, Claire

2014-01-01

Introduction In England, in 2006, new dental contracts devolved commissioning of dental services locally to Primary Care Trusts to meet the needs of their local population. The new national General Dental Services contracts (nGDS) were based on payment for Units of Dental Activity (UDAs) awarded in three treatment bands based on complexity of care. Recently, contract currency in UK dentistry is evolving from UDAs based on volume and case complexity towards ‘blended contracts’ that include incentives linked with key performance indicators such as quality and improved health outcome. Overall, evidence of the effectiveness of incentive-driven contracting of health providers is still emerging. The INCENTIVE Study aims to evaluate a blended contract model (incentive-driven) compared to traditional nGDS contracts on dental service delivery in practices in West Yorkshire, England. Methods and analysis The INCENTIVE model uses a mixed methods approach to comprehensively evaluate a new incentive-driven model of NHS dental service delivery. The study includes 6 dental surgeries located across three newly commissioned dental practices (blended contract) and three existing traditional practices (nGDS contracts). The newly commissioned practices have been matched to traditional practices by deprivation index, age profile, ethnicity, size of practice and taking on new patients. The study consists of three interlinked work packages: a qualitative study to explore stakeholder perspectives of the new service delivery model; an effectiveness study to assess the INCENTIVE model in reducing the risk of and amount of dental disease and enhance oral health-related quality of life in patients; and an economic study to assess cost-effectiveness of the INCENTIVE model in relation to clinical status and oral health-related quality of life. Ethics and dissemination The study has been approved by NRES Committee London, Bromley. The results of this study will be disseminated at national

Y-TZP ceramic processing from coprecipitated powders : A comparative study with three commercial dental ceramics

NARCIS (Netherlands)

Lazar, Dolores R. R.; Bottino, Marco C.; Ozcan, Mutlu; Valandro, Luiz Felipe; Amaral, Regina; Ussui, Valter; Bressiani, Ana H. A.

2008-01-01

Objectives. (1) To synthesize 3 mol% yttria-stabilized zirconia (3Y-TZP) powders via coprecipitation route, (2) to obtain zirconia ceramic specimens, analyze surface characteristics, and mechanical properties, and (3) to compare the processed material with three reinforced dental ceramics. Methods.

Interprofessional education: the inclusion of dental hygiene in health care within the United States - a call to action.

Science.gov (United States)

Vanderbilt, Allison A; Isringhausen, Kim T; Bonwell, Patricia Brown

2013-01-01

There is a lack of access to oral health care in the United States for rural, underserved, uninsured, and low-income populations. There are widely recognized problems with the US health care system, including rapidly increasing costs and access to oral health. During the last decade, there has been a huge influx and push toward interprofessional education programs; however, these programs conveniently leave out dental hygiene. Interprofessional education can bring forth the collaboration, communication, and teamwork necessary to provide a comprehensive health care plan to treat oral health care needs in patients. As the advanced practice for dental hygiene emerges, it is imperative that the educational qualifications of dental hygienists are sufficient to enable them to safely provide the scope of services and care encompassed in these new expanded roles and to effectively participate as an interprofessional team member.

K-FIX: a computer program for transient, two-dimensional, two-fluid flow. THREED: an extension of the K-FIX code for three-dimensional calculations

International Nuclear Information System (INIS)

Rivard, W.C.; Torrey, M.D.

1978-10-01

The transient, two-dimensional, two-fluid code K-FIX has been extended to perform three-dimensional calculations. This capability is achieved by adding five modification sets of FORTRAN statements to the basic two-dimensional code. The modifications are listed and described, and a complete listing of the three-dimensional code is provided. Results of an example problem are provided for verification

Prospective analysis of factors associated with dental behavior management problems, in children aged 7-11 years

Directory of Open Access Journals (Sweden)

Ramya Pai

2015-01-01

Full Text Available Aim: To determine the prevalence of child behavior management problems (BMP and to analyze the influence and predictive power of nondental and dental background variables on BMP. Study Design: Prospective analytical study. Materials and Methods: The study group included 165 children aged 7-11 years who received comprehensive dental treatment, after obtaining written informed consent. Parents/guardians were interviewed using standardized questionnaire to obtain background information. Each child′s treatment was carried out and was recorded with a fixed digital video (DV recorder. The treatments were classified into three levels of invasiveness: Noninvasive (NI, moderately invasive (MI, and highly invasive (HI. The entire DV record of each treatment was observed, and child′s dental behavior was rated independently by two precalibrated examiners using modified Venham′s behavior rating scale. Then, the background factors obtained through the questionnaire data were analyzed for its association with child′s dental behavior. Results: Statistical tests used were Chi-square test and multiple logistic regression analysis to determine the relationship of multiple variables with dental behavior. Comparison of child′s behavior during different visits was done by Wilcoxan matched pairs test. The prevalence of BMP in children aged 7-11 years in the study sample was 0%, 4.2%, and 15.76% for NI, MI, and HI procedures, respectively. Three variables were significant predictors of behavior; order of birth that is, first born, history of hospitalization, and unpleasant past dental experience (P < 0.05. Conclusions: Direct conditioning pathway is the major factor in determining child′s behavior. Dental experiences, duration of treatment, and complexity of treatment have greater impact on how the child behaves in a dental setup.

Effect of Fixed Metallic Oral Appliances on Oral Health.

Science.gov (United States)

Alnazzawi, Ahmad

2018-01-01

There is a substantial proportion of the population using fixed metallic oral appliances, such as crowns and bridges, which are composed of various dental alloys. These restorations may be associated with a number of effects on oral health with variable degrees of severity, to review potential effects of using fixed metallic oral appliances, fabricated from various alloys. The MEDLINE/PubMed database was searched using certain combinations of keywords related to the topic. The search revealed that burning mouth syndrome, oral pigmentation, hypersensitivity and lichenoid reactions, and genotoxic and cytotoxic effects are the major potential oral health changes associated with fixed prosthodontic appliances. Certain oral disorders are associated with the use of fixed metallic oral appliances. Patch test is the most reliable method that can be applied for identifying metal allergy, and the simultaneous use of different alloys in the mouth is discouraged.

Base-metal dental casting alloy biocompatibility assessment using a human-derived three-dimensional oral mucosal model.

LENUS (Irish Health Repository)

McGinley, E L

2012-01-01

Nickel-chromium (Ni-Cr) alloys used in fixed prosthodontics have been associated with type IV Ni-induced hypersensitivity. We hypothesised that the full-thickness human-derived oral mucosa model employed for biocompatibility testing of base-metal dental alloys would provide insights into the mechanisms of Ni-induced toxicity. Primary oral keratinocytes and gingival fibroblasts were seeded onto Alloderm™ and maintained until full thickness was achieved prior to Ni-Cr and cobalt-chromium (Co-Cr) alloy disc exposure (2-72 h). Biocompatibility assessment involved histological analyses with cell viability measurements, oxidative stress responses, inflammatory cytokine expression and cellular toxicity analyses. Inductively coupled plasma mass spectrometry analysis determined elemental ion release levels. We detected adverse morphology with significant reductions in cell viability, significant increases in oxidative stress, inflammatory cytokine expression and cellular toxicity for the Ni-Cr alloy-treated oral mucosal models compared with untreated oral mucosal models, and adverse effects were increased for the Ni-Cr alloy that leached the most Ni. Co-Cr demonstrated significantly enhanced biocompatibility compared with Ni-Cr alloy-treated oral mucosal models. The human-derived full-thickness oral mucosal model discriminated between dental alloys and provided insights into the mechanisms of Ni-induced toxicity, highlighting potential clinical relevance.

Dental anxiety and salivary cortisol levels before urgent dental care.

Science.gov (United States)

Kanegane, Kazue; Penha, Sibele S; Munhoz, Carolina D; Rocha, Rodney G

2009-12-01

Dental anxiety is still prevalent, despite advances in treatment, and affects the utilization of health care services. The purpose of this cross-sectional study was to determine if patients with different degrees of dental anxiety and pain undergoing emergency dental care have different stress reactions as measured by salivary cortisol. Seventy three patients completed the modified dental anxiety scale (MDAS), and described any previous dental traumatic experience. Their socio-demographic characteristics were also recorded. They also rated pain intensity on a 100 mm visual analogue scale (VAS). A saliva sample was collected before the procedure, and analyzed by enzyme immunoassay. Thirty patients were dentally anxious and forty one complained of pain. In this sample, dental anxiety was not related to gender, age, educational level and family income; however, a previous traumatic event was related to dental anxiety. There was no association between salivary cortisol concentrations and gender or dental anxiety. Patients with pain showed higher cortisol levels. When gathering patient information, the dentist should note patients' negative dental experiences in order to provide more effective, less traumatic treatment.

Radiological protection in the dental profession

International Nuclear Information System (INIS)

Holyoak, B.

1979-01-01

A summary is given of legislation concerning health and safety of people as affected by work activities. In connection with legislation in the special field of radiological protection, it was agreed between the (United Kingdom) Health and Safety Executive and the British Dental Association that a survey should be carried out into the use of radiography in dental practices. The terms of the survey, and relevant safety standards, are summarized. The results are discussed under the following headings: personal radiation dose to dental staff, beam filtration, beam diameter, timing units, warning signals, dose per exposure, scattered doserate, film processing, location of the x-ray set, maintenance of the x-ray equipment, holding of dental films, instruction training and supervision. Conclusions are reached, and basic rules proposed. (U.K.)

Clinical and patient-reported outcomes of zirconia-based implant fixed dental prostheses: Results of a prospective case series 5 years after implant placement.

Science.gov (United States)

Spies, Benedikt Christopher; Witkowski, Siegbert; Vach, Kirstin; Kohal, Ralf-Joachim

2018-01-01

To evaluate the clinical and patient-reported outcome of all-ceramic zirconia implant supported fixed dental prostheses (FDPs) 5 years after implant installation. Thirteen patients were treated with two terminally placed one-piece zirconia implants for a three-unit FDP each. The FDPs consisted of a CAD/CAM-fabricated zirconia framework over-pressed with a fluor-apatite veneering ceramic and were adhesively cemented. Survival and success were assessed by applying modified US Public Health Service (USPHS) criteria and preparation of Kaplan-Meier (KM) plots. Alpha and Bravo ratings were accepted for success (among others including small area veneer chippings and occlusal roughness), whereas Charlie ratings allowing for intra-oral correction (e.g., polishing) were accepted for survival. Furthermore, patient-reported outcome measures (PROMs) were analyzed with the help of visual analogue scales (VAS). Wilcoxon matched-pairs signed-rank test (USPHS criteria) and linear mixed models (PROMs) were used to evaluate time effects on response variables. All patients were available 61.8 ± 1.1 months after implant installation (53.6 ± 3.1 months after final prosthesis insertion). FDP survival was 100%. Significant incidence of veneer chipping (p = .0096) and occlusal roughness (p = .0019) was observed. Charlie rated extent of both phenomena resulted in a KM success estimate of 38.5% (95% CI: 14.1%-62.8%; seven FDPs with obvious roughness, three of them with extended veneer chipping). Compared with the pre-treatment assessments (30%-81% of satisfaction), all surveys at prosthetic delivery showed significantly improved VAS scores (66%-93%; p ≤ .038), except for speech (p = .341). Concerning function, esthetics and self-esteem, no decrease in satisfaction could be observed until the end of follow-up (90%-96%; p ≥ .057), whereas perception of sense (92%) and speech (95%) increased over time (p ≤ .030). Occurrence of technical complications did not correlate

Developing a flexible core Dental Public Health curriculum for predoctoral dental and dental hygiene schools.

Science.gov (United States)

Atchison, Kathryn; Mascarenhas, Ana Karina; Bhoopathi, Vinodh

2015-01-01

The curriculum for graduating dental and dental hygiene students must prepare them to contribute to the improvement or maintenance of health for individual patient's and the public's health. The objective is to describe the background for and the process used to develop a core Dental Public Health Curriculum for such students. The process used was to solicit and review existing dental public health curriculum in dental and dental hygiene schools; review curriculum for other health professionals; identify the themes needed to frame the curriculum; select usable materials and identify gaps in existing curricular materials; and develop appropriate curriculum materials that would embody the competencies developed for undergraduate dental and dental hygiene education. Twenty-three topics were identified as embodying the eight competencies. Based on these topics, six courses, Principles of Dental Public Health, Evidence-Based Dentistry, Ethics and Dental Public Health, Dental Public Health Policy and Advocacy, Oral Health Promotion and Disease Prevention, and Oral Health Literacy and Dental Public Health, were prepared. Each course includes syllabus, PowerPoint presentations, student assignments and activities, instructor guide, and classroom discussion points. Depending on the hours available in the existing curriculum at the dental or hygiene school, lecture presentations and take home assignments/discussions may be used independently or in combination with presentations from other courses. In addition, individual discussions and activities may be used to integrate dental public health materials into other courses. A flexible curriculum is available at the AAPHD website to enable the incorporation of DPH topics into the curriculum. © 2015 American Association of Public Health Dentistry.

Effect of a procedural video CD and study guide on the practical fixed prosthodontic performance of Iranian dental students.

Science.gov (United States)

Nikzad, Sakineh; Azari, Abbas; Mahgoli, Hosseinali; Akhoundi, Nasrin

2012-03-01

Dental students in programs around the world typically pass preclinical courses before entering the clinic and working on actual patients. Since fixed prosthodontics is a preclinical course that requires a great deal of effort, students may experience a substantial amount of stress that may affect their self-confidence and/or clinical performance. In this study, an instructional video CD (VCD) and study guide depicting the step-by-step procedures involved in a metal-ceramic tooth preparation and provisional crown fabrication was prepared. Students at the Faculty of Dentistry, Tehran University of Medical Sciences, Tehran, Iran, were divided randomly into two groups. Group A students trained as usual with live patients, and Group B students were given a copy of the VCD and study guide following a lecture. The students in Group B were encouraged to read the study guide and watch the VCD after live demonstrations. Then, both groups practiced individually on mannequins. At the end of the course, the students completed a sixteen-item questionnaire about their stress level, self-confidence, and knowledge base. The results showed that the students exposed to the extra media performed significantly better on some practical phases, e.g., laboratory procedures. A moderate, insignificant correlation was detected between exposure to media and decreasing the students' stress and self-esteem. We concluded that supplementary teaching aids such as a VCD and study guide may improve the clinical performance of dental students to some extent, but the live demonstration is still preferred by students.

Influence of the photoinitiator system and light photoactivation units on the degree of conversion of dental composites.

Science.gov (United States)

Porto, Isabel Cristina Celerino de Moraes; Soares, Luis Eduardo Silva; Martin, Airton Abrahão; Cavalli, Vanessa; Liporoni, Priscila Christiane Suzy

2010-01-01

The aim of this study was to observe the influence of two light polymerization units (LED or halogen light) on the degree of conversion (DC) of three dental composites with lighter shades and a different photoinitiator system. The top (T) and bottom (B) surfaces of 60 discs of composite resin (Filtek™ Supreme, Filtek™ Z250, Tetric™ Ceram Bleach) cured either by LED or by halogen lamp (HL) were studied using an FT-Raman spectrometer. The degree of conversion (DC) was evaluated by following the changes in the intensity of the methacrylate C=C stretching mode at 1640 cm⁻¹. The calculated DC ranged from 54.2% (B) to 73.4% (T) and from 60.2% (B) to 76.6% (T) for the LED and HL, respectively. LED and halogen devices were able to produce an adequate DC for all the resins tested.

A three-dimensional finite element analysis for overdenture attachments supported by teeth and/or mini dental implants.

Science.gov (United States)

Fatalla, Abdalbseet A; Song, Ke; Du, Tianfeng; Cao, Yingguang

2012-12-01

The aim of this study was to establish the optimum design and attachment combination to support an overdenture with minimal stress and flexing produced in the alveolar bone surrounding any natural teeth and/or mini dental implants. Twelve models were included in the study: the six main models (A, B, C, D, E, and F) were categorized according to the support designs of the overdenture prosthesis, and each model was further subdivided according to the attachment combinations into model 1: with Dalbo elliptic and/or O-ring attachments only and model 2: with flexible acrylic attachments. Vertical loads (35 N) and 17.5 N lateral loads under static conditions were applied to the models to simulate the occlusal forces following the concept of lingualized occlusion. All conditions were created using a finite element software program. Maximum von Mises stress at the level of the attachments and at the bone support foundation interfaces were compared in all 12 models. The flexing of the mandible and the attachments were also compared qualitatively. Stress on these models was analyzed after the given loading condition. The results showed that the model with three freestanding mini dental implants and flexible acrylic attachments showed the lowest von Mises stress and flexing, while the models with four freestanding mini dental implants and O-ring attachments showed the highest von Mises stress. Three freestanding mini dental implants with flexible acrylic attachment systems supporting an overdenture were better choices than four mini dental implants with O-ring attachment systems, which showed the maximum flexing and stress values in this qualitative comparison. © 2012 by the American College of Prosthodontists.

Dental therapists: a global perspective.

Science.gov (United States)

Nash, David A; Friedman, Jay W; Kardos, Thomas B; Kardos, Rosemary L; Schwarz, Eli; Satur, Julie; Berg, Darren G; Nasruddin, Jaafar; Mumghamba, Elifuraha G; Davenport, Elizabeth S; Nagel, Ron

2008-04-01

In 1921, New Zealand began training school dental nurses, subsequently deploying them throughout the country in school-based clinics providing basic dental care for children. The concept of training dental nurses, later to be designated dental therapists, was adopted by other countries as a means of improving access to care, particularly for children. This paper profiles six countries that utilise dental therapists, with a description of the training that therapists receive in these countries, and the context in which they practice. Based on available demographic information, it also updates the number of dental therapists practising globally, as well as the countries in which they practice. In several countries, dental therapy is now being integrated with dental hygiene in training and practice to create a new type of professional complementary to a dentist. Increasingly, dental therapists are permitted to treat adults as well as children. The paper also describes the status of a current initiative to introduce dental therapy to the United States. It concludes by suggesting that dental therapists can become valued members of the dental team throughout the world, helping to improve access to care and reducing existing disparities in oral health.

Current State of Dental Education: Executive Summary.

Science.gov (United States)

Formicola, Allan J

2017-08-01

This executive summary for Section 1 of the "Advancing Dental Education in the 21 st Century" project provides a composite picture of information from 12 background articles on the current state of dental education in the United States. The summary includes the following topics: the current status of the dental curriculum, the implications of student debt and dental school finances, the expansion of enrollment, student diversity, pre- and postdoctoral education, safety net status of dental school clinics, and trends in faculty.

Performance of dental impression materials: Benchmarking of materials and techniques by three-dimensional analysis.

Science.gov (United States)

Rudolph, Heike; Graf, Michael R S; Kuhn, Katharina; Rupf-Köhler, Stephanie; Eirich, Alfred; Edelmann, Cornelia; Quaas, Sebastian; Luthardt, Ralph G

2015-01-01

Among other factors, the precision of dental impressions is an important and determining factor for the fit of dental restorations. The aim of this study was to examine the three-dimensional (3D) precision of gypsum dies made using a range of impression techniques and materials. Ten impressions of a steel canine were fabricated for each of the 24 material-method-combinations and poured with type 4 die stone. The dies were optically digitized, aligned to the CAD model of the steel canine, and 3D differences were calculated. The results were statistically analyzed using one-way analysis of variance. Depending on material and impression technique, the mean values had a range between +10.9/-10.0 µm (SD 2.8/2.3) and +16.5/-23.5 µm (SD 11.8/18.8). Qualitative analysis using colorcoded graphs showed a characteristic location of deviations for different impression techniques. Three-dimensional analysis provided a comprehensive picture of the achievable precision. Processing aspects and impression technique were of significant influence.

Leaded apron for use in panoramic dental radiography

Energy Technology Data Exchange (ETDEWEB)

Whitcher, B.L.; Gratt, B.M.; Sickles, E.A.

1980-05-01

The leaded aprons currently available for use during dental radiography do not protect the thyroid gland from radiation. Conventional aprons may produce artifacts when used with panoramic dental x-ray units. This study measures the dose reduction obtained with an experimental leaded apron designed for use with panoramic dental x-ray units. Skin exposures measured at the thyroid and at the sternum were reduced with the use of the apron. Films produced during the study were free from apron artifacts.

Leaded apron for use in panoramic dental radiography

International Nuclear Information System (INIS)

Whitcher, B.L.; Gratt, B.M.; Sickles, E.A.

1980-01-01

The leaded aprons currently available for use during dental radiography do not protect the thyroid gland from radiation. Conventional aprons may produce artifacts when used with panoramic dental x-ray units. This study measures the dose reduction obtained with an experimental leaded apron designed for use with panoramic dental x-ray units. Skin exposures measured at the thyroid and at the sternum were reduced with the use of the apron. Films produced during the study were free from apron artifacts

Dental Chairside Technique. Student's Manual.

Science.gov (United States)

Apfel, Maura; Weaver, Trudy Karlene

This manual is part of a series dealing with skills and information needed by students in dental assisting. The individualized student materials are suitable for classroom, laboratory, or cooperative training programs. This student manual contains four units covering the following topics: local anesthesia; dental office emergencies; oral hygiene;…

Smelling Anxiety Chemosignals Impairs Clinical Performance of Dental Students.

Science.gov (United States)

Singh, Preet Bano; Young, Alix; Lind, Synnøve; Leegaard, Marie Cathinka; Capuozzo, Alessandra; Parma, Valentina

2018-05-15

Despite the fact that human body odors can transfer anxiety-related signals, the impact of such signals in real-life situations is scant. In this study, the effects of anxiety chemosignals on the performance of dental students operating on simulation units, wearing t-shirts imbued with human sweat and masked with eugenol were tested. Twenty-four 4th year dental students (17F) donated their body odors in two sessions (Anxiety and Rest). Twenty-four normosmic, sex- and age-matched test subjects who were3rd year dental students performed three dental procedures while smelling masked anxiety body odors, masked rest body odors or masker alone. The intensity and pleasantness ratings showed that the test subjects could not report perceptual differences between the odor conditions. When exposed to masked anxiety body odors the test subject's dental performance was significantly worse than when they were exposed to masked rest body odors and masker alone, indicating that their performance was modulated by exposure to the emotional tone of the odor. These findings call for a careful evaluation of the anxiety-inducing effects of body odors in performance-related tasks and provide the first ecological evaluation of human anxiety chemosignal communication.

Evaluation of activities aimed at preventing microbiological risks in dental practice

Directory of Open Access Journals (Sweden)

Jolanta Szymańska

2013-02-01

Full Text Available Background: Microbiological contamination of water in dental unit waterlines (DUWL creates a risk of cross-infections, and is a source of biological risk factors in the work environment of a dentist. The aim of the study was to evaluate dentists' knowledge on DUWL microbiological contamination and the scope of activities/procedures they undertake to monitor it. Material and Methods: The questionnaire survey was conducted in 2010 among 107 Polish dentists using dental units in everyday clinical practice. Results: It has been found that in their daily practice, dentists do not follow procedures leading to reduction or elimination of microbiological contamination of dental unit reservoir water. They are not aware of microbiological contamination of DUWL that supply working handpieces with water. They are unaware of the principles of dealing with dental water and water supply systems or the health risk posed by microbiological contamination of unit water for a dental team and patients. Conclusions: It is necessary to provide dentists with information on microbiological contamination of water in dental units, on the correct procedures of handling water and waterlines that supply working handpieces with water. Med Pr 2013;64(1:11–17

Designing and assessing fixed dental prostheses 2 multimedia-based education in dentistry students.

Science.gov (United States)

Jahandideh, Yousef; Roohi Balasi, Leila; Vadiati Saberi, Bardia; Dadgaran, Ideh

2016-01-01

Background: Above all methods effective learning results from decent training, acquired in the proper environment and encouraging creative methods. Computer-assisted training by educational software is considered a fundamental measure to improve medical and dentistry education systems. This study aims to design and assess fixed dental prostheses via 2 multimedia instructional contents at the Guilan dentistry school. Methods: This is a descriptive and cross-sectional study. First off, the instructional content was analyzed. The software used to produce multimedia was the iSpring suite Ver.7.0. After designing the instructional multimedia, this software was loaded by LMS. Sixty-nine dentistry students in the 5th semester at Guilan Dentistry School were selected via convenience sampling. At the end of the course, a structured questionnaire containing 26 items were handed to the students to evaluate the instructional multimedia quality. Results: Mean ±SD age was 24.68±3.24 years, 43 were women (62.4%) and 26 were men (37.6%) -the majority of 76.8% used the internet at home. A portion of 33.3% were inclined to use multimedia and the internet with in-person training. About 60% declared that multimedia quality as being good. Conclusion: the instructional multimedia designs which are compatible with lesson objectives and audiovisual facilities can have a great effect on the student's satisfaction. Preparing instructional multimedia makes the instructional content easily accessible for students to be able to review it several times at the proper opportunity and if presented through LMS they would be able to study the lesson subject wherever and whenever accessing the internet.

Dental education in Peru.

Science.gov (United States)

Komabayashi, Takashi; Sato, Manuel; Rodiguez, Lyly; Sato, Doris; Bird, William F

2008-09-01

This paper provides information about Peru's dental history and dental school system, including the curriculum and dental licensure. With the increase in the number of dental schools in Peru, the number of dentists is also increasing. Until 1965, Peru had only three dental schools; currently, there are 14. Four of these dental schools are public, and ten are private. A five- or six-year dental program leads to the B.D.S. degree. After successful completion of a thesis defense or competency examination, the D.D.S. degree is awarded. The D.D.S. is mandatory for practicing dentistry in Peru. Currently, there are approximately 14,000 active dentists, with a dentist-patient ratio of approximately 1:2,000.

A Method of Postal Audit in Dental Radiodiagnostics

International Nuclear Information System (INIS)

Kroutilikova, D.; Novak, L.

2001-01-01

Full text: The National Radiation Protection Institute (NRPI) develops a new method for independent control of radiodiagnostic dental intraoral units for purposes of state supervision. The method is aimed to check not only basic dosimetric characteristics of the unit, but also conditions of developing process used by dentists. It is considered as a postal audit. The dosimetric part of the method includes irradiation of a radiographic film along with an attached TLD in order to check Ka output, field size and exposition reproducibility. The developing process is checked by means of dental films and a standardised dental phantom. The dentist is asked to develop a dental film irradiated under reference conditions by NRPI, and on the other hand to irradiate his own dental film using the phantom, that will be developed later by NRPI. Comparison of both the dental films provides information about developing process quality. It also indicates a relation between applied Ka and developing process at the place. The method is supposed to simplify the state supervision operation in the field of dental radiodiagnostics. (author)

Radiation dose in dental radiology

International Nuclear Information System (INIS)

Cohnen, M.; Kemper, J.; Moedder, U.; Moebes, O.; Pawelzik, J.

2002-01-01

The aim of this study was to compare radiation exposure in panoramic radiography (PR), dental CT, and digital volume tomography (DVT). An anthropomorphic Alderson-Rando phantom and two anatomical head phantoms with thermoluminescent dosimeters fixed at appropriate locations were exposed as in a dental examination. In PR and DVT, standard parameters were used while variables in CT included mA, pitch, and rotation time. Image noise was assessed in dental CT and DVT. Radiation doses to the skin and internal organs within the primary beam and resulting from scatter radiation were measured and expressed as maximum doses in mGy. For PR, DVT, and CT, these maximum doses were 0.65, 4.2, and 23 mGy. In dose-reduced CT protocols, radiation doses ranged from 10.9 to 6.1 mGy. Effective doses calculated on this basis showed values below 0.1 mSv for PR, DVT, and dose-reduced CT. Image noise was similar in DVT and low-dose CT. As radiation exposure and image noise of DVT is similar to low-dose CT, this imaging technique cannot be recommended as a general alternative to replace PR in dental radiology. (orig.)

Influence of the photoinitiator system and light photoactivation units on the degree of conversion of dental composites

Directory of Open Access Journals (Sweden)

Isabel Cristina Celerino de Moraes Porto

2010-12-01

Full Text Available The aim of this study was to observe the influence of two light polymerization units (LED or halogen light on the degree of conversion (DC of three dental composites with lighter shades and a different photoinitiator system. The top (T and bottom (B surfaces of 60 discs of composite resin (Filtek™ Supreme, Filtek™ Z250, Tetric™ Ceram Bleach cured either by LED or by halogen lamp (HL were studied using an FT-Raman spectrometer. The degree of conversion (DC was evaluated by following the changes in the intensity of the methacrylate C=C stretching mode at 1640 cm-1. The calculated DC ranged from 54.2% (B to 73.4% (T and from 60.2% (B to 76.6% (T for the LED and HL, respectively. LED and halogen devices were able to produce an adequate DC for all the resins tested.

The INCENTIVE protocol: an evaluation of the organisation and delivery of NHS dental healthcare to patients-innovation in the commissioning of primary dental care service delivery and organisation in the UK.

Science.gov (United States)

Pavitt, Sue H; Baxter, Paul D; Brunton, Paul A; Douglas, Gail; Edlin, Richard; Gibson, Barry J; Godson, Jenny; Hall, Melanie; Porritt, Jenny; Robinson, Peter G; Vinall, Karen; Hulme, Claire

2014-09-17

In England, in 2006, new dental contracts devolved commissioning of dental services locally to Primary Care Trusts to meet the needs of their local population. The new national General Dental Services contracts (nGDS) were based on payment for Units of Dental Activity (UDAs) awarded in three treatment bands based on complexity of care. Recently, contract currency in UK dentistry is evolving from UDAs based on volume and case complexity towards 'blended contracts' that include incentives linked with key performance indicators such as quality and improved health outcome. Overall, evidence of the effectiveness of incentive-driven contracting of health providers is still emerging. The INCENTIVE Study aims to evaluate a blended contract model (incentive-driven) compared to traditional nGDS contracts on dental service delivery in practices in West Yorkshire, England. The INCENTIVE model uses a mixed methods approach to comprehensively evaluate a new incentive-driven model of NHS dental service delivery. The study includes 6 dental surgeries located across three newly commissioned dental practices (blended contract) and three existing traditional practices (nGDS contracts). The newly commissioned practices have been matched to traditional practices by deprivation index, age profile, ethnicity, size of practice and taking on new patients. The study consists of three interlinked work packages: a qualitative study to explore stakeholder perspectives of the new service delivery model; an effectiveness study to assess the INCENTIVE model in reducing the risk of and amount of dental disease and enhance oral health-related quality of life in patients; and an economic study to assess cost-effectiveness of the INCENTIVE model in relation to clinical status and oral health-related quality of life. The study has been approved by NRES Committee London, Bromley. The results of this study will be disseminated at national and international conferences and in international journals

Changes in dental plaque following hospitalisation in a critical care unit: an observational study.

Science.gov (United States)

Sachdev, Mishal; Ready, Derren; Brealey, David; Ryu, Jung; Bercades, Georgia; Nagle, Janette; Borja-Boluda, Susana; Agudo, Elisa; Petrie, Aviva; Suvan, Jean; Donos, Nikos; Singer, Mervyn; Needleman, Ian

2013-09-04

Previous research has suggested that deterioration in oral health can occur following hospitalisation. The impact of such deterioration could increase the risk of oral disease, reduce quality of life and increase the potential for healthcare-associated infections (HCAI) such as healthcare-associated pneumonia (HAP). However, the strength of the evidence is limited by, amongst other factors, the few observational studies published that assess oral health longitudinally. In view of the microbiological component of oral diseases and HCAIs, the objective of this study was to investigate the microbiological changes in dental plaque following hospitalisation in a Critical Care Unit (CCU): (1) total number of cultivable bacteria and (2) presence and changes in specific HAP pathogens. We conducted a prospective, longitudinal observational study in the CCU of University College Hospital, London. Study participants were recruited within 24 hours of admission. Dental plaque samples were collected from up to six sites per patient. The primary outcome was microbiological change from baseline to seven days with additional analysis for participants still present at day 14. 50 patients were recruited with 36 available for review at one week, with early discharge accounting for much of the loss to follow-up. The median total viable count of the plaque microbiota at baseline was 4.40 × 105 cfu/ml and increased at week one to 3.44 × 106 cfu/ml. The total viable microbe counts increased by a median of 2.26 × 106 cfu/ml from baseline to week one (95% CI: 3.19 × 106, 1.24 × 107) and this was statistically significant (P bacterial count of dental plaque increases during hospitalisation in CCU. This finding, together with the colonisation of dental plaque by HAP bacteria strengthens the evidence for a deterioration in oral health in CCU and a risk factor for negative health and quality of life outcomes.

Occurrence of paresthesia after dental local anesthetic administration in the United States.

Science.gov (United States)

Garisto, Gabriella A; Gaffen, Andrew S; Lawrence, Herenia P; Tenenbaum, Howard C; Haas, Daniel A

2010-07-01

Several studies have suggested that the likelihood of paresthesia may depend on the local anesthetic used. The purpose of this study was to determine if the type of local anesthetic administered had any effect on reports of paresthesia in dentistry in the United States. The authors obtained reports of paresthesia involving dental local anesthetics during the period from November 1997 through August 2008 from the U.S. Food and Drug Administration Adverse Event Reporting System. They used chi(2) analysis to compare expected frequencies, on the basis of U.S. local anesthetic sales data, with observed reports of oral paresthesia. During the study period, 248 cases of paresthesia occurring after dental procedures were reported. Most cases (94.5 percent) involved mandibular nerve block. The lingual nerve was affected in 89.0 percent of cases. Reports involving 4 percent prilocaine and 4 percent articaine were 7.3 and 3.6 times, respectively, greater than expected (chi(2), P paresthesia occurs more commonly after use of 4 percent local anesthetic formulations. These findings are consistent with those reported in a number of studies from other countries. Until further research indicates otherwise, dentists should consider these results when assessing the risks and benefits of using 4 percent local anesthetics for mandibular block anesthesia.

Evaluation of the shielding of dental X-rays units; Evaluacion del blindaje de unidades de rayos X dentales

Energy Technology Data Exchange (ETDEWEB)

Medrano, E.; Vega C, H. R.; Letechipia de L, C.; Hernandez D, V. M.; Salas L, M. A., E-mail: edumeco@yahoo.com.mx [Universidad Autonoma de Zacatecas, Apdo. Postal 336, 98000 Zacatecas (Mexico)

2014-08-15

The capacity of the walls of the dental radio-diagnostic rooms has been determined, to diminish the dose levels during the use of the X-rays equipment s. The study was carried out in the Dentistry Academic Unit of the campus Siglo X XI of the Universidad Autonoma de Zacatecas. The X-rays equipment s are a learning tool for the dentistry students and they are also used for offering health services to the population; for this reason is important to verify that the dose levels outside of the room walls are safe. During the evaluation process were used conservative approaches without prejudice of the thickness necessary in benefit of the radiological protection. Of the evaluation was found that all the walls satisfy their function thoroughly like barriers against the X-rays. (Author)

Dental responsibility loadings and the relative value of dental services.

Science.gov (United States)

Teusner, D N; Ju, X; Brennan, D S

2017-09-01

To estimate responsibility loadings for a comprehensive list of dental services, providing a standardized unit of clinical work effort. Dentists (n = 2500) randomly sampled from the Australian Dental Association membership (2011) were randomly assigned to one of 25 panels. Panels were surveyed by questionnaires eliciting responsibility loadings for eight common dental services (core items) and approximately 12 other items unique to that questionnaire. In total, loadings were elicited for 299 items listed in the Australian Dental Schedule 9th Edition. Data were weighted to reflect the age and sex distribution of the workforce. To assess reliability, regression models assessed differences in core item loadings by panel assignment. Estimated loadings were described by reporting the median and mean. Response rate was 37%. Panel composition did not vary by practitioner characteristics. Core item loadings did not vary by panel assignment. Oral surgery and endodontic service areas had the highest proportion (91%) of services with median loadings ≥1.5, followed by prosthodontics (78%), periodontics (76%), orthodontics (63%), restorative (62%) and diagnostic services (31%). Preventive services had median loadings ≤1.25. Dental responsibility loadings estimated by this study can be applied in the development of relative value scales. © 2017 Australian Dental Association.

Development of dental anxiety in schoolchildren

DEFF Research Database (Denmark)

Soares, Fernanda C.; Lima, Rodrigo A.; de Barros, Mauro V.G.

2017-01-01

's health-related behaviours. Additionally, the children's dental caries experience was clinically evaluated to obtain information about DMFT/dmft (decayed, filled and missing teeth) indices. Using the Dental Anxiety Question, children whose parents responded “yes” to the prompt “Is he/she very afraid...... used medication chronically had a 2.1 times greater likelihood of having high dental anxiety. Furthermore, children whose parents reported high dental anxiety had a 2.6 times greater likelihood of having high dental anxiety themselves. A one-unit increase in a child's dmft score increased the risk...... of high dental anxiety by 1.1 times at follow-up. Conclusion: After two years, the incidence of high dental anxiety was 15.0%. Poor oral health, unstable general health and parents with high dental anxiety were factors that were associated with this type of anxiety in schoolchildren. It is important...

Accidental Ingestion of Instruments in Pediatric Dental Patients: Report of Three Cases

Directory of Open Access Journals (Sweden)

Amey Panse

2012-01-01

Full Text Available Very young children are at risk of swallowing or aspirating numerous household things. This risk is enhanced during dental procedures of these children as they tend to be very unco-operative due to their age and lack of maturity to understand the importance of the treatment. Use of physical barriers, sedation or general anesthesia is not practically possible in every child scheduled for dental treatment. Dentist must be able to manage emergency situations in which patients accidentally swallow dental instruments or materials during treatment and procedures. This article presents ingestion of dental objects in 3 children and attempts to discuss the management and prevention of such mishaps.

Intergrated dental care in nursing homes

NARCIS (Netherlands)

Gerritsen, P.F.M.

2015-01-01

The thesis deals with integrated dental care in nursing homes. First, the dental treatment needs were ascertained of 432 residents in three Dutch nursing homes that offer integrated dental care. Dentist researchers intra-orally examined the residents and found that 72% required dental treatment.

The Dental Trauma Internet Calculator

DEFF Research Database (Denmark)

Gerds, Thomas Alexander; Lauridsen, Eva Fejerskov; Christensen, Søren Steno Ahrensburg

2012-01-01

Background/Aim Prediction tools are increasingly used to inform patients about the future dental health outcome. Advanced statistical methods are required to arrive at unbiased predictions based on follow-up studies. Material and Methods The Internet risk calculator at the Dental Trauma Guide...... provides prognoses for teeth with traumatic injuries based on the Copenhagen trauma database: http://www.dentaltraumaguide.org The database includes 2191 traumatized permanent teeth from 1282 patients that were treated at the dental trauma unit at the University Hospital in Copenhagen (Denmark...

Methods used by accredited dental specialty programs to advertise faculty positions: results of a national survey.

Science.gov (United States)

Ballard, Richard W; Hagan, Joseph L; Armbruster, Paul C; Gallo, John R

2011-01-01

The various reasons for the current and projected shortages of dental faculty members in the United States have received much attention. Dental school deans have reported that the top three factors impacting their ability to fill faculty positions are meeting the requirements of the position, lack of response to position announcement, and salary/budget limitations. An electronic survey sent to program directors of specialty programs at all accredited U.S. dental schools inquired about the number of vacant positions, advertised vacant positions, reasons for not advertising, selection of advertising medium, results of advertising, and assistance from professional dental organizations. A total of seventy-three permanently funded full-time faculty positions were reported vacant, with 89.0 percent of these positions having been advertised in nationally recognized professional journals and newsletters. Networking or word-of-mouth was reported as the most successful method for advertising. The majority of those responding reported that professional dental organizations did not help with filling vacant faculty positions, but that they would utilize the American Dental Association's website or their specialty organization's website to post faculty positions if they were easy to use and update.

Determinants of Demand in the Public Dental Emergency Service.

Science.gov (United States)

Matsumoto, Maria Sa; Gatti, Marcia An; de Conti, Marta Hs; de Ap Simeão, Sandra F; de Oliveira Braga Franzolin, Solange; Marta, Sara N

2017-02-01

Although dental emergencies are primarily aimed at pain relief, in practice, dental emergency services have been overwhelmed by the massive inflow of patients with less complex cases, which could be resolved at basic levels of health care. They frequently become the main gateway to the system. We investigated the determinant factors of demand at the Central Dental Emergency Unit in Bauru, São Paulo, Brazil. The questionnaire was applied to 521 users to evaluate sociodemographic profile; factors that led users to seek the service at the central dental emergency; perception of service offered. About 80.4% of users went directly to the central dental emergency, even before seeking basic health units. The reasons were difficulty to be attended (34.6%) and incompatible time (9.8%). To the perception of the necessity of the service, responses were problem as urgent (78.3%) and pain was the main complaint (69.1%). The profile we found was unmarried (41.5%), male (52.2%), white (62.8%), aged 30 to 59 (52.2%), incomplete basic education (41.6%), family income up to 2 minimum wages (47.4%), and no medical/dental plan (88.9%). It was concluded that the users of central dental emergency come from all sectors of the city, due to difficult access to basic health units; they consider their complaint urgent; and they are satisfied with the service offered. To meet the profile of the user urgency's service so that it is not overloaded with demand that can be fulfilled in basic health units.

Dental Holography

Science.gov (United States)

Dirtoft, Ingegerd

1983-12-01

Ten years have passed since the first articles appeared in this new field. The qualities of the laser light together with the need of contactless 3-D measurements for different dental purposes seemed to be extremely promising, but still just a few scientists have used the method and mostly for laboratory studies. For some reason there has been a preponderance for orthodontic measurements. This seems to be a bit peculiar from holographic view compared with measurements for engineering purposes, which usually are made on metals. So naturally holography can become a clinical tool for measurements in the field of fixed bridges, removable partial dentures and implants. One of the problems is that the need for holography in dental research must be fulfilled in collaboration with physicists. Only a two-way communication during an entire experiment can balance both technical and odontological demands and thus give practical and clinical important results. The need for an easy way of handling the evaluation to get all required information is another problem and of course the holographic equipment must be converted to a box easy to handle for everyone. At last the position of dental holography today is going to be carefully examined together with an attempt to look into the hopefully exciting and not to utopic future for this research field.

Dental, Dental Hygiene, and Graduate Students' and Faculty Perspectives on Dental Hygienists' Professional Role and the Potential Contribution of a Peer Teaching Program.

Science.gov (United States)

McComas, Martha J; Inglehart, Marita R

2016-09-01

The changing role of dental hygienists deserves dental and dental hygiene educators' attention. The first aim of this survey study was to assess University of Michigan dental, dental hygiene, and graduate students' and faculty members' perceptions of dental hygienists' roles; their attitudes and behaviors related to clinical interactions between dental and dental hygiene students; and perceived benefits of engaging dental hygiene students as peer teachers for dental students. The second aim was to assess whether one group of dental students' experiences with dental hygiene student peer teaching affected their perceptions of the dental hygiene profession. Survey respondents were 57 dental hygiene students in all three years of the program (response rate 60% to 100%); 476 dental students in all four years (response rate 56% to 100%); 28 dental and dental hygiene graduate students (response rate 28%); and 67 dental and dental hygiene faculty members (response rate 56%). Compared to the other groups, dental students reported the lowest average number of services dental hygienists can provide (p≤0.001) and the lowest average number of patient groups for which dental hygienists can provide periodontal care (ppeer teaching (ppeer teaching. After experiencing dental hygiene student peer teaching, the dental students' perceptions of dental hygienists' roles, attitudes about clinical interactions with dental hygienists, and perceived benefits of dental hygiene student peer teachers improved and were more positive than the responses of their peers with no peer teaching experiences. These results suggest that dental hygiene student peer teaching may improve dental students' perceptions of dental hygienists' roles and attitudes about intraprofessional care.

Dental laboratory communication regarding removable dental prosthesis design in the UAE.

Science.gov (United States)

Haj-Ali, Reem; Al Quran, Firas; Adel, Omar

2012-07-01

The purpose of this study was to determine the methods dental practitioners in the United Arab Emirates (UAE) use to communicate cast removable dental prosthesis (RDP) design to dental laboratories; identify common practices taken by dentists/dental technicians prior to fabrication of RDP framework; and seek out dental technicians' attitudes toward their role in RDP design decisions. All dental laboratories (n = 28) listed in a local telephone directory were invited to complete a questionnaire through a face-to-face interview. They were also requested to examine RDP cases fabricated in the past 2 months and identify steps taken by dentists/dental technicians prior to fabrication of the framework. Descriptive statistics were used to report frequencies and percentages. Twenty-one (75%) dental laboratories agreed to participate, out of which 19 had the facilities to fabricate chrome-cobalt RDPs. Cast RDPs comprised approximately 4.04% (±2.67) of services provided. A reported 84.2% of dentists frequently communicate through generic lab script, with 89.5% rarely/never giving details regarding RDP design. While 52.6% of labs agree/strongly agree that it is the dentist's responsibility to decide the final RDP design, 94.7% agree/strongly agree that dentists should depend on dental technicians for design-making decisions. A total of 19 RDP cases were reviewed. All 19 were surveyed and designed by dental technicians but received dentist approval of design prior to fabrication. Thirteen (68.4%) had rest-seat preparations done by dentists after approval, and new impressions sent to the lab. No other tooth modifications were noted. The responsibility of RDP design appeared to be largely delegated to dental technicians. Importance of tooth modifications seemed to be undervalued and not completed prior to framework fabrication. © 2012 by the American College of Prosthodontists.

The forgotten cousins : dental and chiropractic radiography

International Nuclear Information System (INIS)

Stirling, G.; Cartwright, P.

1996-01-01

Radiation protection surveillance methods should be appropriate to the particular use of x-rays employed. Dentists use small fixed position radiation fields with low output machines, making frequent routine visits unnecessary. There are also large numbers of them. On the other hand chiropractors use large fields and potentially high doses as well as a wide variety of projections and filters, which makes routine visits necessary. These differences have not unsurprisingly led to the National Radiation Laboratory adopting quite different approaches to monitoring these domains. In dental radiography past surveys have shown that the x-ray units themselves to be very robust and stable. A simple postal test was developed for dentists. A small number of visits are also made to dental x-ray facilities per year. Because of the greater possible level of hazard involved routine visits are made to chiropractic establishments. Chiropractic radiation protection surveys have now been extended to include calculating patient doses. The wide variety of projections and the extensive use of beam shaping filters and diaphragms means that we had to develop a program (called Chirodos) to allow for these filters in calculating the chiropractic patient doses. Data collected during the radiation protection surveys includes technique factors, filter materials, positions, and shielding. A national database of chiropractic doses has led us to establish reference doses for chiropractic x-ray exams. (author)

Efficiency of Management and Marketing Strategies within The Dental Office

Directory of Open Access Journals (Sweden)

Oprea Valentin BUSU

2017-12-01

Full Text Available This article is based on research about the management and marketing strategies within the dental office and how we can better understand its importance. One of the major problems faced by dentists today is the management of the dental office. Certainly, from the outside, individuals perceive the dentist's office as a simple medical unit in which medical staff operate. However, people living in the field face each day multiple problems of both medical and bureaucratic nature. For the dentist/manager, the dental office is perceived as a dual-purpose unit: providing oro-dental care and earning profit.

Drywall plates evaluation as protection barriers in dental X-rays and mammography facilities; Evaluacion de placas de drywall como barreras de proteccion en instalaciones de rayos X dental y mamografia

Energy Technology Data Exchange (ETDEWEB)

Guevara R, V. Y.; Romero C, N. [Empresa QC DOSE S. A. C., Av. Tomas Marsano 1915, Surquillo, Lima 34 (Peru); Berrocal T, M., E-mail: vguevara@qcdose.com [Universidad Nacional Mayor de San Marcos, C. German Amezaga 375, Edif. Jorge Basadre, Ciudad Universitaria, Lima 1 (Peru)

2014-08-15

In the dental X-rays and mammography facilities, usually lead shielded walls as protective barriers are used. Lead is a good attenuator for X-rays, but has toxic properties and its cost is high. Mammography equipment s emit low-energy photons in the range of 25 keV to 35 keV, on current computers; the primary radiation beam is intercepted by the image receptor. Peri apical dental equipment s emit photons in the range of 50 to 90 keV, their filtration is fixed. These devices emit a collimated beam whose diameter is slightly larger than the diagonal dimension of a standard film of dental X-rays. When a dental x-ray is performed, the radiation beam is partially attenuated by the patient. Drywall is a material consisting of plasterboard between two cardboard layers, being its components gypsum and cellulose generally. It is used in construction for execution of interior walls, ceilings and wall coverings, could also serve as a replacement for lead as well as other materials. In this paper three drywall prototypes (Giplac), formed with 02, 04 and 06 drywall layers (13, 16 and 20 cm of thickness respectively) were tested as barriers against primary and secondary X-ray radiation that come from dental and mammography equipment s. The results show that the drywall prototype, 02 layers, efficiently attenuates the secondary radiation beam produced by conventional mammography equipment. And the prototype 04 and 06 layers, efficiently attenuates the primary radiation beam produced by peri apical dental equipment. (author)

Is self interdental cleaning associated with dental plaque levels, dental calculus, gingivitis and periodontal disease?

Science.gov (United States)

Crocombe, L A; Brennan, D S; Slade, G D; Loc, D O

2012-04-01

To ascertain whether interdental cleaning behaviours of Australian adults were associated with lower levels of plaque, gingivitis and periodontal disease. Data were obtained from the National Survey of Adult Oral Health 2004-06. Outcome variables were three indicators of oral hygiene outcomes (the presence or not of dental plaque, dental calculus and gingivitis) and two of periodontal disease (the presence or not of at least one tooth with a periodontal pocket or clinical attachment loss of ≥ 4 mm). The independent variable was classified into the following three groups: regularly clean interproximally 'at least daily' (daily+); 'less than daily' (dental plaque (dental calculus (dental plaque and gingivitis, although there was no significant association between regular interdental cleaning and clinical attachment loss. © 2011 John Wiley & Sons A/S.

Dental school finances: current status.

Science.gov (United States)

Crawford, W H

1986-05-01

Total expenditures and revenues of 58 US dental school were derived from reports of the ADA Division of Educational Measurements. These financial data were studied by type of dental school (public, state-related private, and private) and by expenditure/revenue categories. Dental schools showed little diversity in expenditures: most were directed toward instruction; few were directed toward research or continuing education. Several distinctive patterns among the three types of dental schools in revenues were observed. Two configurations emerged: public and state-related private dental schools receive more than 75% of their revenues from government and tuition, and private dental schools, more than 50%.

Care delivery and compensation system changes: a case study of organizational readiness within a large dental care practice organization in the United States.

Science.gov (United States)

Cunha-Cruz, Joana; Milgrom, Peter; Huebner, Colleen E; Scott, JoAnna; Ludwig, Sharity; Dysert, Jeanne; Mitchell, Melissa; Allen, Gary; Shirtcliff, R Mike

2017-12-20

Dental care delivery systems in the United States are consolidating and large practice organizations are becoming more common. At the same time, greater accountability for addressing disparities in access to care is being demanded when public funds are used to pay for care. As change occurs within these new practice structures, attempts to implement change in the delivery system may be hampered by failure to understand the organizational climate or fail to prepare employees to accommodate new goals or processes. Studies of organizational behavior within oral health care are sparse and have not addressed consolidation of current delivery systems. The objective of this case study was to assess organizational readiness for implementing change in a large dental care organization consisting of staff model clinics and affiliated dental practices and test associations of readiness with workforce characteristics and work environment. A dental care organization implemented a multifaceted quality improvement program, called PREDICT, in which community-based mobile and clinic-based dental services were integrated and the team compensated based in part on meeting performance targets. Dental care providers and supporting staff members (N = 181) were surveyed before program implementation and organizational readiness for implementing change (ORIC) was assessed by two 5-point scales: change commitment and efficacy. Providers and staff demonstrated high organizational readiness for change. Median change commitment was 3.8 (Interquartile range [IQR]: 3.3-4.3) and change efficacy was 3.8 (IQR: 3.0-4.2). In the adjusted regression model, change commitment was associated with organizational climate, support for methods to arrest tooth decay and was inversely related to office chaos. Change efficacy was associated with organizational climate, support for the company's mission and was inversely related to burnout. Each unit increase in the organizational climate scale predicted 0

Dental Curriculum Development in Developing Countries.

Science.gov (United States)

Phantumvanit, Prathip

1996-01-01

Since establishment of formal dental education in Southeast Asia, changes stemming from research and technology have led to dental curriculum changes. Development of the dental curriculum can be divided into three phases: disease oriented; health oriented; and community oriented. Evolution of these phases is traced in the dental curricula of Laos,…

Development and evaluation of a patient decision aid for young people and parents considering fixed orthodontic appliances.

Science.gov (United States)

Marshman, Zoe; Eddaiki, Abdussalam; Bekker, Hilary L; Benson, Philip E

2016-12-01

To develop and evaluate a child-centred patient decision aid for young people, and their parents, supporting shared decision making about fixed orthodontic appliance treatment with dental health professionals, namely the Fixed Appliance Decision Aid (FADA). The studies were undertaken in a UK teaching dental hospital orthodontic department in 2013-2014. The development phase involved an interview study with: (a) 10 patients (12-16 years old), and their parents, receiving orthodontic care to investigate treatment decision making and inform the content of the FADA and (b) 23 stakeholders critiquing the draft decision aid's content, structure and utility. The evaluation phase employed a pre-/post-test study design, with 30 patients (12-16 years old) and 30 parents. Outcomes included the Decisional Conflict Scale; measures of orthodontic treatment expectations and knowledge. Qualitative analysis identified two informational needs: effectiveness of treatment on orthodontic outcomes and treatment consequences for patients' lives. Quantitative analysis found decisional conflict reduced in both patients (mean difference -12.3, SD 15.3, 95% CI 6.6-17.9; p orthodontic treatment increased; expectations about care were unchanged. Using the FADA may enable dental professionals to support patients and their parents, decisions about fixed appliance treatments more effectively, ensuring young people's preferences are integrated into care planning.

Drywall plates evaluation as protection barriers in dental X-rays and mammography facilities

International Nuclear Information System (INIS)

Guevara R, V. Y.; Romero C, N.; Berrocal T, M.

2014-08-01

In the dental X-rays and mammography facilities, usually lead shielded walls as protective barriers are used. Lead is a good attenuator for X-rays, but has toxic properties and its cost is high. Mammography equipment s emit low-energy photons in the range of 25 keV to 35 keV, on current computers; the primary radiation beam is intercepted by the image receptor. Peri apical dental equipment s emit photons in the range of 50 to 90 keV, their filtration is fixed. These devices emit a collimated beam whose diameter is slightly larger than the diagonal dimension of a standard film of dental X-rays. When a dental x-ray is performed, the radiation beam is partially attenuated by the patient. Drywall is a material consisting of plasterboard between two cardboard layers, being its components gypsum and cellulose generally. It is used in construction for execution of interior walls, ceilings and wall coverings, could also serve as a replacement for lead as well as other materials. In this paper three drywall prototypes (Giplac), formed with 02, 04 and 06 drywall layers (13, 16 and 20 cm of thickness respectively) were tested as barriers against primary and secondary X-ray radiation that come from dental and mammography equipment s. The results show that the drywall prototype, 02 layers, efficiently attenuates the secondary radiation beam produced by conventional mammography equipment. And the prototype 04 and 06 layers, efficiently attenuates the primary radiation beam produced by peri apical dental equipment. (author)

The Effect of Teaching Experience on Service-Learning Beliefs of Dental Hygiene Educators

Science.gov (United States)

Burch, Sharlee Shirley

2013-01-01

The purpose of this non-experimental causal-comparative study was to determine if service-learning teaching experience affects dental hygiene faculty perceptions of service-learning benefits and barriers in the United States. Dental hygiene educators from entry-level dental hygiene education programs in the United States completed the Web-based…

A modified efficient method for dental pulp stem cell isolation

Directory of Open Access Journals (Sweden)

Maryam Raoof

2014-01-01

Full Text Available Background: Dental pulp stem cells can be used in regenerative endodontic therapy. The aim of this study was to introduce an efficient method for dental pulp stem cells isolation. Materials and Methods: In this in-vitro study, 60 extracted human third molars were split and pulp tissue was extracted. Dental pulp stem cells were isolated by the following three different methods: (1 digestion of pulp by collagenase/dispase enzyme and culture of the released cells; (2 outgrowth of the cells by culture of undigested pulp pieces; (3 digestion of pulp tissue pieces and fixing them. The cells were cultured in minimum essential medium alpha modification (αMEM medium supplemented with 20% fetal bovine serum(FBS in humid 37°C incubator with 5% CO 2 . The markers of stem cells were studied by reverse transcriptase polymerase chain reaction (PCR. The student t-test was used for comparing the means of independent groups. P <0.05 was considered as significant. Results: The results indicated that by the first method a few cell colonies with homogenous morphology were detectable after 4 days, while in the outgrowth method more time was needed (10-12 days to allow sufficient numbers of heterogeneous phenotype stem cells to migrate out of tissue. Interestingly, with the improved third method, we obtained stem cells successfully with about 60% efficiency after 2 days. The results of RT-PCR suggested the expression of Nanog, Oct-4, and Nucleostemin markers in the isolated cells from dental pulps. Conclusion: This study proposes a new method with high efficacy to obtain dental pulp stem cells in a short time.

Randomized comparative study of intravenous infusion of three different fixed doses of milrinone in pediatric patients with pulmonary hypertension undergoing open heart surgery.

Science.gov (United States)

Barnwal, Neeraj Kumar; Umbarkar, Sanjeeta Rajendra; Sarkar, Manjula Sudeep; Dias, Raylene J

2017-01-01

Pulmonary hypertension secondary to congenital heart disease is a common problem in pediatric patients presenting for open heart surgery. Milrinone has been shown to reduce pulmonary vascular resistance and pulmonary artery pressure in pediatric patients and neonates postcardiac surgery. We aimed to evaluate the postoperative outcome in such patients with three different fixed maintenance doses of milrinone. Patients were randomized into three groups. All patients received fixed bolus dose of milrinone 50 μg/kg on pump during rewarming. Following this, patients in low-dose group received infusion of milrinone at the rate of 0.375 μg/kg/min, medium-dose group received 0.5 μg/kg/min, and high-dose group received 0.75 μg/kg/min over 24 h. Heart rate, mean arterial pressure (MAP), mean airway pressure (MaP), oxygenation index (OI), and central venous pressure (CVP) were compared at baseline and 24 h postoperatively. Dose of inotropic requirement, duration of ventilatory support and Intensive Care Unit (ICU) stay were noted. MAP, MaP, OI, and CVP were comparable in all three groups postoperatively. All patients in the low-dose group required low inotropic support while 70% of patients in the high-dose group needed high inotropic support to manage episodes of hypotension (P = 0.000). Duration of ventilatory support and ICU stay in all three groups was comparable (P = 0.412, P = 0.165). Low-dose infusions while having a clinical impact were more beneficial in avoiding adverse events and decreasing inotropic requirement without affecting duration of ventilatory support and duration of ICU stay.

Dental pain and dental treatment of young children attending the general dental service.

Science.gov (United States)

Milsom, K M; Tickle, M; Blinkhorn, A S

2002-03-09

The objective was to examine the relationship between dental pain (and its sequelae), and the extent of restorative care provided for primary molars, amongst children who regularly attend a general dental practitioner. A retrospective review of the clinical case notes of 677 children with caries who attended 50 general dental practitioners on a regular basis. Analyses were performed at the subject level. Logistic regression models were fitted for the dependent variables whether or not pain, a dental extraction for pain or sepsis and a course of antibiotics was recorded, after taking into account the proportion of carious teeth that were restored, the total number of carious teeth, the age caries was first recorded, gender and the clustering of the subjects within dental practices. Almost half of the children in the study (48%) were recorded as having at least one episode of pain. Total decay experience in the primary molars was a significant predictor of pain, extraction due to pain or sepsis and prescription of antibiotics. There was no significant association between the proportion of carious teeth restored and each of the three dependent variables. For those children who regularly attend their general dental practitioner and who have decay in their primary molars, dental pain is a common finding. Total decay experience in primary molars is the principal predictor of pain, extraction due to pain and the need for antibiotics, whilst the level of restorative care in the primary dentition is less important. In order to reduce the incidence of dental pain in young children, effective methods of preventing caries at the individual and public health levels need to be expanded.

A survey of information technology management at U.S. dental schools.

Science.gov (United States)

Wrzosek, Mariusz; Warner, Gary; Donoff, R Bruce; Howell, Thomas H; Karimbux, Nadeem

2003-10-01

The purpose of this project is to assess how information technology (IT) is being implemented and managed in U.S. dental schools. Recent advances in IT have restructured many of the administrative, curricular, and clinical functions in dental schools. Purchasing hardware and software and hiring personnel to maintain IT present significant financial and administrative commitments for these schools. A nine-question survey was sent to all U.S. dental schools via email with a follow-up postal mailing. Forty-six surveys were returned (83.6 percent response rate). The analysis indicates that dental schools are managing IT in vastly different ways. For example, 71 percent of the schools report a centralized structure, and 61 percent have a line item in the budget to manage IT. On average there are 4.4 full-time equivalents hired to manage IT, with the majority of these people being trained in IT (eight schools reported dually trained IT/dental personnel). The majority of schools report using software to manage their admissions process (70 percent), curriculum analysis (72 percent), and delivery of curriculum content (72 percent), as well as to manage their student clinics (91 percent, business aspect; 87 percent, patients; 65 percent, grading on clinic floor; 76 percent, managing clinical evaluations) and faculty practices (85 percent, business aspect; 65 percent, patients). The use of multimedia (50 percent) and simulation (52 percent) in the preclinical area is mixed. The purchase of laptops (24 percent) and PCs (11 percent) is required in almost a third of all schools participating in this survey. Dental schools in the United States are managing IT in a variety of different ways, using various internally and commercially available tools. The cost to institutions can be large and is usually handled in centralized structures in the school with fixed budgets. The results of this survey can be used to assist schools in the planning and implementation of IT at their

Radiation protection in the dental profession

International Nuclear Information System (INIS)

Holyoak, B.; Overend, J.K.; Gill, J.R.

1980-01-01

A survey, conducted by the Health and Safety Executive (HSE), on the standard of radiation protection in the dental profession in the United Kingdom is described. The results are compared with UK advisory standards. The preliminary survey results were reported in the professional press and each participating dental practitioner received comments and advice concerning the basic requirements for radiation protection. The method of survey has been broadened to form the basis of inspection of dental radiography by the HSE. (H.K.)

Joining Dental Ceramic Layers With Glass

Science.gov (United States)

Saied, MA; Lloyd, IK; Haller, WK; Lawn, BR

2011-01-01

Objective Test the hypothesis that glass-bonding of free-form veneer and core ceramic layers can produce robust interfaces, chemically durable and aesthetic in appearance and, above all, resistant to delamination. Methods Layers of independently produced porcelains (NobelRondo™ Press porcelain, Nobel BioCare AB and Sagkura Interaction porcelain, Elephant Dental) and matching alumina or zirconia core ceramics (Procera alumina, Nobel BioCare AB, BioZyram yttria stabilized tetragonal zirconia polycrystal, Cyrtina Dental) were joined with designed glasses, tailored to match thermal expansion coefficients of the components and free of toxic elements. Scanning electron microprobe analysis was used to characterize the chemistry of the joined interfaces, specifically to confirm interdiffusion of ions. Vickers indentations were used to drive controlled corner cracks into the glass interlayers to evaluate the toughness of the interfaces. Results The glass-bonded interfaces were found to have robust integrity relative to interfaces fused without glass, or those fused with a resin-based adhesive. Significance The structural integrity of the interfaces between porcelain veneers and alumina or zirconia cores is a critical factor in the longevity of all-ceramic dental crowns and fixed dental prostheses. PMID:21802131

Fit of 4-unit FDPs made of zirconia and CoCr-alloy after chairside and labside digitalization--a laboratory study.

Science.gov (United States)

Keul, Christine; Stawarczyk, Bogna; Erdelt, Kurt-Jürgen; Beuer, Florian; Edelhoff, Daniel; Güth, Jan-Frederik

2014-04-01

To analyse the marginal fit of 4-unit fixed dental prostheses (FDPs) and the accuracy of three-dimensional cast-datasets using both approaches to Computer Aided Design (CAD)/Computer Aided Manufacturing (CAM): direct and indirect digitalization. A titanium model of a 4-unit FDP was digitized by an intraoral scanning device (iTero, Align Technology, Carlstadt, US; DD, n=12). Additionally 12 conventional impressions were taken and referring master casts were digitized by a laboratory scanner (CS2, Straumann, Basel, Switzerland; ID, n=12). Frameworks were fabricated (CARES CADCAM GmbH, Straumann, Markkleeberg, Germany) from base metal alloy (coron, Straumann; DD-C: n=12; ID-C: n=12) and zirconia (zerion, Straumann; DD-Z: n=12; ID-Z: n=12) from the same datasets. The marginal fit of the resulting frameworks and the accuracy of the underlying datasets from DD and ID were evaluated. Data were analyzed by unpaired two sample Student's t-test with Levene-test (pdigitalization methods (DD-Z: 127.23±66.87 μm, ID-Z: 141.08±193.17 μm) could be observed. Base metal alloy frameworks exhibited significantly better marginal fit than zirconia frameworks (DD: pdigitalization lead to clinically acceptable marginal fit of 4-unit FDPs from base metal alloy and zirconia. Higher accuracy of datasets from DD leads to better marginal fit of frameworks from base metal alloy but not for ones from zirconia. Copyright © 2014 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Comparative evaluation of perceptions of dental students to three methods of teaching in Ile-Ife, Nigeria.

Science.gov (United States)

Esan, T A; Oziegbe, E O

2015-12-01

The World Health Organization in 1994 recommended that dental education should be problem based, socially and culturally relevant, and community oriented. To explore the perceptions of Pre-phase II (pre-clinical II) dental students on three methods of teaching used during two academic sessions. All part IV dental students in two consecutive sessions undergoing pre phase II course in the Faculty of Dentistry, Obafemi Awolowo University, Ile-Ife were recruited into the study. Three different modes of teaching that is, Problem based learning (PBL), hybrid PBL and traditional teaching were used to teach the students. A twenty two itemed anonymous questionnaire on a five point Likert scale was administered to the students at the end of the course. Six perceived factors were extracted from the questionnaire using factor analysis. There was a statistically significant difference (p method compared to the other methods of teaching. The perceived factor "communication with peers" had the highest mean score for PBL in both sessions (4.57 ± 0.58 and 4.09 ± 0.93 respectively). However, PBL method was very helpful in all the six perceived factors while the students perceived that the traditional method of teaching was not helpful in "interaction with tutors" and "challenge to critical thinking". The findings showed that students preferred the PBL method to other forms of teaching. PBL enhanced the students' communication skill, was very useful as pedagogic tool and improved their critical thinking.

The effect of dental management for maintaining dental health in patients with head and neck cancer after radiotherapy

International Nuclear Information System (INIS)

Katsura, Kouji; Sasai, Keisuke; Sato, Katsuro; Hayashi, Takafumi; Goto, Sanae; Tomita, Masahiko; Matsuyama, Hiroshi

2009-01-01

The purpose of this study was to evaluate the significance of our dental management protocol by observing the chronological change of dental health of head and neck radiotherapy patients. Fifty-two head and neck radiotherapy patients who had received dental management to prevent and/or alleviate their oral complications were enrolled in this study. They were followed for three or more years after radiotherapy. We divided them into three groups according to the timing of the start of dental management; Pre, Mid and Post. The chronological changes of dental status (DMFT and the number of tooth extractions) and osteoradionecrosis were investigated for three to five years. The increase in the DMFT index of the Pre and Mid groups was reduced to less than 2 by introducing our dental management protocol. On the contrary, the number of unavoidable tooth extractions following radiotherapy was the least in the Pre group. The incidence rates of osteoradionecrosis of the mandible in the Pre, Mid and Post groups were 6.5%, 18.0% and 20.0% respectively. Our dental management protocol was proved to be effective in maintaining dental health and helpful in controlling osteoradionecrosis following head and neck radiotherapy. For a more effective outcome, we advocate that dental management should commence before the start of head and neck radiotherapy. (author)

The total occlusal convergence of the abutment of a partial fixed dental prosthesis: A definition and a clinical technique for its assessment

Science.gov (United States)

Mamoun, John S.

2013-01-01

The abutment(s) of a partial fixed dental prosthesis (PFDP) should have a minimal total occlusal convergence (TOC), also called a taper, in order to ensure adequate retention of a PFDP that will be made for the abutment(s), given the height of the abutment(s). This article reviews the concept of PFDP abutment TOC and presents an alternative definition of what TOC is, defining it as the extent to which the shape of an abutment differs from an ideal cylinder shape of an abutment. This article also reviews experimental results concerning what is the ideal TOC in degrees and explores clinical techniques of estimating the TOC of a crown abutment. The author suggests that Dentists use high magnification loupes (×6-8 magnification or greater) or a surgical operating microscope when preparing crown abutments, to facilitate creating a minimum abutment TOC. PMID:24932130

Clinical medical sciences for undergraduate dental students in the United Kingdom and Ireland - a curriculum.

LENUS (Irish Health Repository)

Mighell, A J

2011-08-01

The technical aspects of dentistry need to be practised with insight into the spectrum of human diseases and illnesses and how these impact upon individuals and society. Application of this insight is critical to decision-making related to the planning and delivery of safe and appropriate patient-centred healthcare tailored to the needs of the individual. Provision for the necessary training is included in undergraduate programmes, but in the United Kingdom and Ireland there is considerable variation between centres without common outcomes. In 2009 representatives from 17 undergraduate dental schools in the United Kingdom and Ireland agreed to move towards a common, shared approach to meet their own immediate needs and that might also be of value to others in keeping with the Bologna Process. To provide a clear identity the term \\'Clinical Medical Sciences in Dentistry\\' was agreed in preference to other names such as \\'Human Disease\\' or \\'Medicine and Surgery\\'. The group was challenged to define consensus outcomes. Contemporary dental education documents informed, but did not drive the process. The consensus curriculum for undergraduate Clinical Medical Sciences in Dentistry teaching agreed by the participating centres is reported. Many of the issues are generic and it includes elements that are likely to be applicable to others. This document will act as a focus for a more unified approach to the outcomes required by graduates of the participating centres and act as a catalyst for future developments that ultimately aim to enhance the quality of patient care.

Dental Charting. Learning Activities, Unit Tests, Progress Chart, and Work Sheet.

Science.gov (United States)

Texas Univ., Austin. Center for Occupational Curriculum Development.

These materials are part of a series dealing with skills and information needed by students in dental assisting. The individualized student materials are suitable for classroom, laboratory, or cooperative training programs. These student materials, designed to be used with the Dental Charting Student Manual, consist of learning activities, unit…

Dental magnetic resonance tomography (dental-MRT) as a method for imaging of the maxillo-mandibular bone; Dentale Magnetresonanztomographie (Dental-MRT) als Verfahren zur Darstellung des maxillomandibulaeren Zahnhalteapparates

Energy Technology Data Exchange (ETDEWEB)

Gahleitner, A.; Nasel, C.; Schick, S.; Dorffner, S.; Imhof, H.; Trattnig, S. [Wien Univ. (Austria). Abt. fuer Osteologie; Bernhart, T.; Mailath, G.; Watzek, G. [Wien Univ. (Austria). Abt. fuer Orale Chirurgie

1998-10-01

Purpose: To establish a new method for dental imaging using magnetic resonance tomography named Dental-MRT and to demonstrate its usefulness in diagnosing dentogen pathologies of the mandible and maxilla. Methods: Seven healthy volunteers, three patients with pulpitis, two patients with dentigerous cysts, two patients after tooth transplantation, and three patients with atrophic mandibles have been evaluated. Optimized axial T{sub 1}- and T{sub 2}-weighted gradient echo and spin echo sequences in 2D and 3D technique have been established to perform studies of the jaws. The acquired images were reconstructed with a standard dental software package on a workstation as panorama and cross-sectional views of the mandible or maxilla. Results: The entire maxillo-mandibular bone, teeth, dental pulp, and the content of the mandibular canal were well depicted. Patients with pulpitis demonstrate bone marrow edema in the periapical region. Dentigerous cysts and their relation to the surrounding structures are clearly shown. After contrast media administration marked enhancement of the dental pulp can be demonstrated. Conclusion: Dental-MRT promises to provide a new tool for visualization and detection of dental diseases. (orig.) [Deutsch] Ziel: Das Vorstellen der Dental-MRT als neue Methode zur Darstellung des Ober- und Unterkiefers und ihre Anwendung bei der Diagnose zahnmedizinischer Erkankungen. Methoden: 7 gesunde Probanden, drei Patienten mit Pulpitis, zwei Patienten mit odontogenen Zysten, zwei Patienten nach Zahntransplantationen und drei Patienten mit atrophem Unterkiefer wurden untersucht. Optimierte axiale T{sub 1}- und T{sub 2}-gewichtete Gradienten-Echo- und Spin-Echo-Sequenzen in 2D und 3D-Technik wurden angewandt. Nach der Untersuchung wurden Panoramaschnitte und dentale Rekonstruktionen des Ober- und Unterkiefers, unter Verwendung einer gebraeuchlichen Dental-Software, angefertigt. Ergebnisse: Der gesamte Kieferbereich, Zaehne, Pulpa und der Inhalt des

Dental unit water lines decontamination with the aid of nanotechnology

Directory of Open Access Journals (Sweden)

Rashmi Paramashivaiah

2016-01-01

Conclusions: Biofilm formation in DUWLs is inevitable with the subsequent release of part of microbiota into the otherwise sterile dental settings. These consequences can be quite serious on clinicians and dental patients. Though conventional measures in water decontamination have been partly successful, the quest for more foolproof methods has led to the use of latest technology, i.e., nanotechnology. The most practical option has to be chosen based on the ease of their usage.

The Dental School Interview As a Predictor of Dental Students' OSCE Performance.

Science.gov (United States)

Park, Sang E; Price, Mirissa D; Karimbux, Nadeem Y

2018-03-01

The aim of this study was to evaluate the use of the dental school admissions interview score as a noncognitive indicator of performance in predoctoral dental education, with specific attention to whether a correlation existed between the admissions interview scores and performance on the objective structured clinical examination (OSCE). The study population consisted of all 175 students in the Harvard School of Dental Medicine (HSDM) DMD Classes of 2012 through 2016. Data on students' gender and age on entering dental school were self-reported using their applications for admission to the HSDM DMD program. Data on students' OSCE scores for three examination sessions were collected from the Office of Dental Education. The results showed that the students' interview scores did not significantly correlate with OSCE performance on any of the three exams. Performance on the first and second OSCEs did, however, correlate with performance on the third OSCE (pinterview score. These results suggest that although the admissions interview scores can serve as an important resource in student selection, with the lack of association between interview and OSCE scores, it is possible that the communication skills required for the interview do not directly overlap with those required for OSCE success.

Clinical effects of fixed functional Herbst appliance in the treatment of class II/1 malocclusion

Directory of Open Access Journals (Sweden)

Nedeljković Nenad

2009-01-01

Full Text Available Introduction. Sagittal mandible deficiency is the most common cause of skeletal Class II malocclusion. Treatment objective is to stimulate sagittal mandible growth. Fixed functional Herbst appliance use is beneficial for shortening the time required for treatment and does not depend on patient compliance. Case outline. A 13-year-old girl was referred to the Clinic of Orthodontics, School of Dentistry in Belgrade following previous unsuccessful treatment of her skeletal Class II malocclusion using an activator. The patient's poor cooperation had led to failure of the treatment. Patient was subjected to the Herbst treatment for 6 months followed by fixed appliance for another 8 months. Lateral cephalograms before and after the treatment was performed. The remodelation of condylar and fossal articulation was assessed by superimposition of pre- and post-treatment temporomandibular joint tomograms. The promotion of oral hygiene and fluoride use was performed because orthodontic treatment carries a high caries risk and risk for periodontal disease. Skeletal and dental changes were observed after treatment (correction [Max+Mand]: molar relation 7 mm, overjet 8 mm, skeletal relation 5 mm, molars 2 mm, incisors 3 mm. Combination of Herbst and fixed appliances was effective in the treatment of dental and skeletal irregularities for a short period of time. Conclusion . In the retention period, 14 months after treatment, occlusal stability exists. Follow-up care in oral prevention is based on regular recalls at the dental office and supervision at home by the parents.

Frequency of hepatitis B (HBV) viral markers in sixth year dental students after three years clinical exposure

Energy Technology Data Exchange (ETDEWEB)

Buxt, P; Fairbairn, P J.M.; Stern, S R; Treisman, B [University of the Witwatersrand, Johannesburg (South Africa). Dept. of Oral Pathology

1981-08-01

The frequency of Hepatitis B viral markers was studied in 40 6th year dental students at the University of the Witwatersrand, Johannesburg, after three years clinical exposure, using the radioimmunoassay technique. Three were anti-HBs positive; none was HBsAg positive. The frequency of the anti-HBs positive cases did not differ significantly from a group of blood donors, nor were there any statistically significant associated risk factors.

Burnout, depression and suicidal ideation in dental and dental hygiene students.

Science.gov (United States)

Deeb, George R; Braun, Sarah; Carrico, Caroline; Kinser, Patricia; Laskin, Daniel; Golob Deeb, Janina

2018-02-01

The aim of this study was to assess the relationship between burnout, depressive symptoms and suicidal ideation in dental and dental hygiene students and to evaluate the influence of gender, programme type and year of study. Third- and fourth-year dental (DS) and first- and second-year hygiene students (DHS) completed the Patient Health Questionnaire (PHQ-9) and an abbreviated Maslach Burnout Inventory online as measures of depressive symptoms/suicidality and burnout, respectively. The statistical analyses included summary statistics and tests for intergroup comparisons (chi-square) to evaluate the influence of gender, programme type (DHS or DS) and year of study. Correlations between depression, suicidality and burnout were also conducted. A total of 32 dental hygiene and 119 dental students participated. 40% of the dental and 38% of the hygiene students met criteria for burnout. No differences were found between years or between programmes. Nine per cent of both dental and hygiene students were above the cut-off for moderate depressive symptoms, but there were no statistical differences between the third- and fourth-year dental and the first- and second-year hygiene students. Six per cent of the dental and 9% of the dental hygiene students were above the cut-off for clinically significant suicidal ideation, but there were no statistical differences between dental and hygiene students. There were no differences noted in the dental students based on gender for any of the measures. Depression was significantly associated with all three subscales of burnout. Suicidal ideation was only significantly related to the lack of personal accomplishment subscale of burnout. These findings suggest the need for introducing preventive measures for such affective states in dental and dental hygiene training programmes. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Microstructure of titanium-cement-lithium disilicate interface in CAD-CAM dental implant crowns: a three-dimensional profilometric analysis.

Science.gov (United States)

Cresti, Stefano; Itri, Angelo; Rebaudi, Alberto; Diaspro, Alberto; Salerno, Marco

2015-01-01

Peri-implantitis is an infection of the implant surface caused by adhesion of bacteria that generate bone resorption and sometimes even consequent implant loss. Both screw-retained and cemented fixed implants are affected. The purpose of this study is to investigate the morphological defects at the cemented interface between titanium abutment and ceramic crown, comparing different adhesive cements used to fill the marginal gap. Twelve computer-aided design-computer-aided manufacturing dental crowns were cemented to titanium abutments using three different resin composite cements. Sealed margins were polished using grommets with descending diamond particle size. Three groups of four crowns each were made according to the cement used, namely RelyX Unicem (3 M ESPE), Panavia F 2.0 (Kuraray), and NX3 (Nexus Kerr). Samples were analyzed using optical inspection, three-dimensional profilometry, and image analysis, including analysis of variance. Although RelyX showed significantly lower root mean square surface roughness (4.4 ± 1.5 μm) than that of NX3 (7.0 ± 2.9 μm), it showed no significant difference with Panavia (3.7 ± 1.5 μm). The marginal gap was significantly wider in Panavia (149 ± 108 μm) as compared with NX3 (71 ± 45 μm) and Relyx (64 ± 34 μm). For all groups, homogeneous heights of both metal-cement and ceramic-cement gaps were observed. Moreover, all samples showed homogeneity of the margins and absence of instrumental bias, thus validating both procedure and materials. When using the chosen polishing method, RelyX Unicem showed both low roughness and marginal width, and thus the smoothest and more continuous abutment-crown interlayer, promising a low probability of occurrence of peri-implantitis. © 2013 Wiley Periodicals, Inc.

Setting up a mobile dental practice within your present office structure.

Science.gov (United States)

Morreale, James P; Dimitry, Susan; Morreale, Mark; Fattore, Isabella

2005-02-01

Different service models have emerged in Canada and the United States to address the issue of senior citizens' lack of access to comprehensive dental care. Over the past decade, one such model, the use of mobile dental service units, has emerged as a practical strategy. This article describes a mobile unit, operated as an adjunct to the general practitioner's office and relying mainly on existing office resources, both human and capital, to deliver services at long-term care institutions. The essential components of a profitable geriatric mobile unit are described, including education, equipment, marketing research and development, and human resource management. Issues related to patient consent and operating expenditures are also discussed. Data from one practitioner's mobile dental unit, in Hamilton, Ontario, are presented to demonstrate the feasibility and profitability of this approach.

Relationship between dental anomalies and orthodontic root resorption of upper incisors.

Science.gov (United States)

Van Parys, Katrien; Aartman, Irene H A; Kuitert, Reinder; Zentner, Andrej

2012-10-01

The aim of this study was to examine the potential relationship between the occurrence of orthodontic root resorption and presence of dental anomalies such as tooth agenesis and pipette-shaped roots. Dental anomalies and root resorption were assessed on dental panoramic tomographs (DPT) of 88 subjects, 27 males and 61 females, mean age 28.4 (SD = 11.3 years), selected from orthodontic patients on the basis of the following exclusion criteria: previous fixed appliance treatment, bad quality of the DPTs and no visibility of the periodontal ligament of every tooth, and younger than 15 years of age at the onset of treatment with fixed edgewise appliance lasting at least 18 months. A pipette-shaped root was identified as defined by a drawing. Tooth agenesis was assessed on DPTs and from subjects' dental history. Root resorption was calculated as the difference between the root length before and after treatment, with and without a correction factor (crown length post-treatment/crown length pre-treatment). If one of the four upper incisors showed root resorption of ≥2.3 mm with both formulas, the patient was scored as having root resorption. Chi-square tests indicated that there was no relationship between orthodontic root resorption and agenesis (P = 0.885) nor between orthodontic root resorption and pipette-shaped roots (P = 0.800). There was no relationship between having one of the anomalies and root resorption either (P = 0.750). In the present study, it was not possible to confirm on DPTs a relationship between orthodontic root resorption and dental anomalies, such as agenesis and pipette-shaped roots.

A national audit of Australian dental practice distribution: do all Australians get a fair deal?

Science.gov (United States)

Tennant, Marc; Kruger, Estie

2013-08-01

Australia is the sixth biggest (by area) country in the world, having a total area of about 7.5 million km(2) (3 million square miles). This study located every dental practice in the country (private and public) and mapped these practices against population. The total population of Australia (21.5 million) is distributed across 8,529 suburbs. On average about one-third of the population from each State lives in suburbs without practices and 46% live in suburbs with one to five dentists. Of those living within the study frameset, 86.6% live within 5 km of a private practice and 84.4% live within 10 km of a government practice. Australia's dental practices are distributed in a very uneven fashion across its vast area. Three-quarters of suburbs have no dental practice and over one-third of the population live in these suburbs. This research clearly identified that in a vast and uneven socio-geographically distributed country, service planning, if left to market forces, will end with a practice distribution that is fixed by economic drivers of scale and not that of disease burden. A more population health-driven approach to future design and construction of government safety net services is needed to address these disparities. © 2013 FDI World Dental Federation.

Comparison Of Internal Adaptation Of Fixed Restorations Fabricated From Four Different Materials By A Three Axis Mill

Science.gov (United States)

2016-06-26

COMP ARIS ON OF INTERNAL ADAPTATION OF FIXED RESTO RA TIO NS FABRICATED FROM FOUR DIFFERENT MATERIALS BY A THREE-AXIS MILL by Bryan Paul...MATERIALS BY A THREE-AXIS MILL is appropriately acknowledged and, beyond brief excerpts, is with the permission of the copyright owner. ~r2L~ Bryan Paul...RESTORATIONS FABRICATED FROM FOUR DIFFERENT MATERIALS BY A THREE-AXIS MILL LCDR Bryan Paul Rasmussen, DC USN Prosthodontics Dept., 2016 Directed by

Comparison of dimensional accuracy of digital dental models produced from scanned impressions and scanned stone casts

Science.gov (United States)

Subeihi, Haitham

Introduction: Digital models of dental arches play a more and more important role in dentistry. A digital dental model can be generated by directly scanning intraoral structures, by scanning a conventional impression of oral structures or by scanning a stone cast poured from the conventional impression. An accurate digital scan model is a fundamental part for the fabrication of dental restorations. Aims: 1. To compare the dimensional accuracy of digital dental models produced by scanning of impressions versus scanning of stone casts. 2. To compare the dimensional accuracy of digital dental models produced by scanning of impressions made of three different materials (polyvinyl siloxane, polyether or vinyl polyether silicone). Methods and Materials: This laboratory study included taking addition silicone, polyether and vinyl polyether silicone impressions from an epoxy reference model that was created from an original typodont. Teeth number 28 and 30 on the typodont with a missing tooth number 29 were prepared for a metal-ceramic three-unit fixed dental prosthesis with tooth #29 being a pontic. After tooth preparation, an epoxy resin reference model was fabricated by duplicating the typodont quadrant that included the tooth preparations. From this reference model 12 polyvinyl siloxane impressions, 12 polyether impressions and 12 vinyl polyether silicone impressions were made. All 36 impressions were scanned before pouring them with dental stone. The 36 dental stone casts were, in turn, scanned to produce digital models. A reference digital model was made by scanning the reference model. Six groups of digital models were produced. Three groups were made by scanning of the impressions obtained with the three different materials, the other three groups involved the scanning of the dental casts that resulted from pouring the impressions made with the three different materials. Groups of digital models were compared using Root Mean Squares (RMS) in terms of their

Osteogenic differentiation of dental pulp stem cells under the influence of three different materials

DEFF Research Database (Denmark)

Ajlan, S. A.; Ashri, N. Y.; Aldahmash, Abdullah M.

2015-01-01

Background: Regeneration of periodontal tissues is a major goal of periodontal therapy. Dental pulp stem cells (DPSCs) show mesenchymal cell properties with the potential for dental tissue engineering. Enamel matrix derivative (EMD) and platelet-derived growth factor (PDGF) are examples of materi......Background: Regeneration of periodontal tissues is a major goal of periodontal therapy. Dental pulp stem cells (DPSCs) show mesenchymal cell properties with the potential for dental tissue engineering. Enamel matrix derivative (EMD) and platelet-derived growth factor (PDGF) are examples...

Rechargeable biofilm-controlling tubing materials for use in dental unit water lines.

Science.gov (United States)

Luo, Jie; Porteous, Nuala; Sun, Yuyu

2011-08-01

A simple and practical surface grafting approach was developed to introduce rechargeable N-halamine-based antimicrobial functionality onto the inner surfaces of continuous small-bore polyurethane (PU) dental unit waterline (DUWL) tubing. In this approach, tetrahydrofuran (THF) solution of a free-radical initiator, dicumyl peroxide (DCP), flowed through the PU tubing (inner diameter of 1/16 in., or 1.6 mm) to diffuse DCP into the tubing's inner walls, which was used as initiator in the subsequent grafting polymerization of methacrylamide (MAA) onto the tubing. Upon chlorine bleach treatment, the amide groups of the grafted MAA side chains were transformed into acyclic N-halamines. The reactions were confirmed with attenuated total reflectance infrared (ATR) spectra and iodometric titration. The mechanical properties of the tubing were not significantly affected by the grafting reactions. The biofilm-controlling function of the new N-halamine-based PU tubing was evaluated with Pseudomonas aeruginosa (P. aeruginosa), one of the most isolated water bacteria from DUWLs, in a continuous bacterial flow model. Bacteria culturing and SEM studies showed that the inner surfaces of the new N-halamine-based PU tubing completely prevented bacterial biofilm formation for at least three to four weeks. After that, bacteria began to colonize the tubing surface. However, the lost function was fully regenerated by exposing the tubing inner surfaces to diluted chlorine bleach. The recharging process could be repeated periodically to further extend the biofilm-controlling duration for long-term applications.

Dental anxiety and personality: investigating the relationship between dental anxiety and self-consciousness.

Science.gov (United States)

Economou, George C

2003-09-01

This study investigated whether personality plays a role in a condition called dental anxiety. Specifically, the study examined the relationship between dental anxiety (the negative response to the stress elicited from a dental interaction) and self-consciousness (the tendency to evaluate aspects of oneself that are subject to private and public display). The purpose of this study was to identify the characteristics possessed by dentally anxious individuals who face potential health risks because of their avoidance. Sixty York University undergraduate students were recruited by convenience sampling to participate. These subjects completed Corah's Dental Anxiety Scale and the Self-Consciousness Scale. The Self-Consciousness Scale consists of three subscales, including private self-consciousness, public self-consciousness, and social anxiety. Results indicated an 0.54 significant correlation between dental anxiety and self-consciousness. The public self-consciousness and social anxiety subscales correlated the most with dental anxiety. Furthermore, the data did not indicate a significant moderating relationship for gender between the two aforementioned variables. These results contribute to the establishment of personality characteristics as one of the dimensions determining dental anxiety.

Students' perceived importance of diversity exposure and training in dental education.

Science.gov (United States)

Novak, Karen F; Whitehead, Albert W; Close, John M; Kaplan, Alan L

2004-03-01

Intercultural competence is an important component of the doctor-patient relationship in the multicultural climate evolving in the United States. We hypothesized that 1) exposure to racial and ethnic diversity in the student body, faculty, staff, and patient population in dental school and 2) a dental school curriculum that includes presentations on issues concerning racial and ethnic diversity will contribute to students' feeling more competent and confident to enter the multicultural work environment that is rapidly developing in the United States. A Likert-type scale questionnaire was administered to 627 fourth-year dental students enrolled in seven dental schools representing geographically diverse regions of the United States. Of these, 376 questionnaires were returned for a response rate of 60 percent. Results indicated that both the perception of diversity in the school environment and the presentation of diversity-specific content in the curriculum had moderately positive and significant correlations with the students' perception of their competency or ability to serve and work with diverse populations. The respective Pearson correlation coefficients for diversity in the school environment and diversity curriculum were .497 (ptraining in the dental school environment are important for dental students entering a multicultural workplace.

Dental magnetic resonance tomography (dental-MRT) as a method for imaging of the maxillo-mandibular bone

International Nuclear Information System (INIS)

Gahleitner, A.; Nasel, C.; Schick, S.; Dorffner, S.; Imhof, H.; Trattnig, S.; Bernhart, T.; Mailath, G.; Watzek, G.

1998-01-01

Purpose: To establish a new method for dental imaging using magnetic resonance tomography named Dental-MRT and to demonstrate its usefulness in diagnosing dentogen pathologies of the mandible and maxilla. Methods: Seven healthy volunteers, three patients with pulpitis, two patients with dentigerous cysts, two patients after tooth transplantation, and three patients with atrophic mandibles have been evaluated. Optimized axial T 1 - and T 2 -weighted gradient echo and spin echo sequences in 2D and 3D technique have been established to perform studies of the jaws. The acquired images were reconstructed with a standard dental software package on a workstation as panorama and cross-sectional views of the mandible or maxilla. Results: The entire maxillo-mandibular bone, teeth, dental pulp, and the content of the mandibular canal were well depicted. Patients with pulpitis demonstrate bone marrow edema in the periapical region. Dentigerous cysts and their relation to the surrounding structures are clearly shown. After contrast media administration marked enhancement of the dental pulp can be demonstrated. Conclusion: Dental-MRT promises to provide a new tool for visualization and detection of dental diseases. (orig.) [de

Development of a dosimetric system for dental X-ray equipment quality control

International Nuclear Information System (INIS)

Melo, Francisco Almeida de

2002-08-01

An electronic instrument with digital readout was designed and constructed to provide fast, simple and non-invasive measurements of X-ray dental equipment parameters. This instrument is capable of evaluating the entrance dose, exposure time, tube voltage (kVp) and beam filtration. It consists of a set of five photodiodes connected each one in the photocurrent mode to the input of a designed integrating electrometer. Three of the detectors are fixed under aluminium filters with different thicknesses, one is fixed under a 0.3 mm copper filter and the other has no filtration. The readings of the three detectors under aluminium filters and of the bare detector permit the determination of the half-value layer, which is used to calculate the beam filtration. The ratio between the readings of the detector below the copper filter and the one without filtration is used to determine the tube voltage. The signal produced by the detector without filter is used to evaluate the patient entrance dose, and to active an electronic timer for measuring the real exposure time. The tests and calibration of the instrument in different voltages in the 59 - 70kVp range, showed that its response is both stable and reproducible to within 1%. The instrument response was compared to the one from a commercial non-invasive X-ray test equipment (Gammex RMI Multifunction kVp meter). The results showed that the response of the developed instrument is in good agreement with the RMI meter which is the standard equipment for such measurements. These results indicate that the dosimetric system is suitable for use in Dental Quality Assurance Programs. (author)

Randomized comparative study of intravenous infusion of three different fixed doses of milrinone in pediatric patients with pulmonary hypertension undergoing open heart surgery

Directory of Open Access Journals (Sweden)

Neeraj Kumar Barnwal

2017-01-01

Full Text Available Background: Pulmonary hypertension secondary to congenital heart disease is a common problem in pediatric patients presenting for open heart surgery. Milrinone has been shown to reduce pulmonary vascular resistance and pulmonary artery pressure in pediatric patients and neonates postcardiac surgery. We aimed to evaluate the postoperative outcome in such patients with three different fixed maintenance doses of milrinone. Methodology: Patients were randomized into three groups. All patients received fixed bolus dose of milrinone 50 μg/kg on pump during rewarming. Following this, patients in low-dose group received infusion of milrinone at the rate of 0.375 μg/kg/min, medium-dose group received 0.5 μg/kg/min, and high-dose group received 0.75 μg/kg/min over 24 h. Heart rate, mean arterial pressure (MAP, mean airway pressure (MaP, oxygenation index (OI, and central venous pressure (CVP were compared at baseline and 24 h postoperatively. Dose of inotropic requirement, duration of ventilatory support and Intensive Care Unit (ICU stay were noted. Results: MAP, MaP, OI, and CVP were comparable in all three groups postoperatively. All patients in the low-dose group required low inotropic support while 70% of patients in the high-dose group needed high inotropic support to manage episodes of hypotension (P = 0.000. Duration of ventilatory support and ICU stay in all three groups was comparable (P = 0.412, P = 0.165. Conclusion: Low-dose infusions while having a clinical impact were more beneficial in avoiding adverse events and decreasing inotropic requirement without affecting duration of ventilatory support and duration of ICU stay.

A three-dimensional analysis of skeletal and dental characteristics in skeletal class III patients with facial asymmetry.

Science.gov (United States)

Yu, Jinfeng; Hu, Yun; Huang, Mingna; Chen, Jun; Ding, Xiaoqian; Zheng, Leilei

2018-03-15

To evaluate the skeletal and dental characteristics in skeletal class III patients with facial asymmetry and to analyse the relationships among various parts of the stomatognathic system to provide a theoretical basis for clinical practice. Asymmetric cone-beam computed tomography data acquired from 56 patients were evaluated using Mimics 10.0 and 3-Matic software. Skeletal and dental measurements were performed to assess the three-dimensional differences between two sides. Pearson correlation analysis was used to determine the correlations among measurements. Linear measurements, such as ramal height, mandible body length, ramal height above the sigmoid notch (RHASN), maxillary height, condylar height, buccal and total cancellous bone thickness, and measurements of condylar size, were significantly larger on the nondeviated side than on the deviated side (P orthodontic camouflage has limitations and potential risks. A combination of orthodontics and orthognathic surgery may be the advisable choice in patients with a menton deviation greater than 4 mm. An important association between vertical skeletal disharmony and dental compensation was also observed.

Development of three methods for control rod position monitoring based on fixed in-core neutron detectors

International Nuclear Information System (INIS)

Peng, Xingjie; Li, Qing; Wang, Kan

2015-01-01

Highlights: • Three methods are utilized separately to unfold the control rod position from the fixed in-core neutron detector measurements. • Fixed in-core neutron detector measurements are simulated by neutronics code SMART. • Numerical results show that all these methods can unfold the control rod position accurately. • Two correction strategies are proposed to correct the simulated fixed in-core detector signals. - Abstract: Nuclear reactor core power distribution on-line monitoring system is very important in core surveillance, and this system should have the ability to indicate some abnormal conditions, such as the unacceptable control rod misalignment. In this study, the methodologies of radial basis function neural network (RBFNN), group method of data handling (GMDH) and Levenberg–Marquardt (LM) algorithm are utilized separately to unfold the control rod position from the fixed in-core neutron detector measurements. For using these methods, a large number of in-core detector signals corresponding to various known rod positions are needed. These data can be generated by an advanced core calculation code. In this study, the neutronics code SMART was used. The simulation results show that all these methods can unfold the control rod position accurately, and the performance comparison shows that the regularized RBFNN performs best. Two correction strategies are proposed to correct the simulated fixed in-core detector signals and improve the rod position monitoring accuracy when there are mismatches between actual physical factors and modeled physical factors

Association between Childhood Dental Experiences and Dental Fear among Dental, Psychology and Mathematics Undergraduates in Brazil

Directory of Open Access Journals (Sweden)

Júnia M. Serra-Negra

2012-12-01

Full Text Available The aim of the present study was to evaluate the association between childhood dental experiences and dental fear in adulthood among dentistry, psychology and mathematics undergraduate students. A cross-sectional study of 1,256 students from the city of Belo Horizonte, Brazil, was performed. Students responded to the Brazilian version of the Dental Fear Survey (DFS and a questionnaire regarding previous dental experiences. Both the DFS and the questionnaire were self-administered. Association was tested using descriptive, bivariate and multivariate linear regression analysis, with a 5% significance level. Dentistry undergraduates reported lower scores than psychology (p < 0.001 and mathematics undergraduates (p < 0.05 for all three dimensions of the DFS. Negative dental experiences in childhood was associated with dimensions of Avoidance (B = 2.70, p < 0.001, Physiological arousal (B = 1.42, p < 0.001 and Fears of specific stimuli/situations (B = 3.44, p < 0.001. The reason for first visit to dentist was associated with dimensions of Physiological arousal (B = 0.76, p < 0.01 and Fears of specific stimuli/situations (B = 1.29, p < 0.01. Dentists should be encouraged to evaluate the dental fear of their patients before treatment. The DFS has been found to be an effective instrument for this purpose.

Orthodontic correction of Class III malocclusion in a young patient with the use of a simple fixed appliance.

Science.gov (United States)

Park, Jae Hyun

2012-01-01

Anterior crossbites are one of the most common orthodontic problems we observe in growing children. The first step in treating an anterior crossbite is to determine whether the crossbite is dental or skeletal in nature. To determine a precise diagnosis, a thorough clinical, radiographic and model analysis is required. This article shows the treatment of Class III malocclusion by correcting anterior dental crossbite with the use of a simple fixed appliance.

The working practices and job satisfaction of dental therapists: findings of a national survey.

Science.gov (United States)

Gibbons, D E; Corrigan, M; Newton, J T

2000-10-28

To describe the working practices and level of job satisfaction of dental therapists in the United Kingdom. Postal questionnaire survey of 380 dental therapists registered with the General Dental Council. Only 13% of dental therapists are also qualified as dental hygienists. Around 75% of those registered with the GDC are currently employed as dental therapists. Of those not currently working as dental therapists most were either working as hygienists or caring for their children at home. Over 90% of those working as therapists are employed within the Community Dental Service. About half work part-time. Part-time working is more common among respondents with childcare responsibilities. Most dental therapists are employed in clinical roles, and perform a limited range of treatments. A small proportion appear to have been asked to undertake duties which are not currently legal for them to perform. Three-quarters of those who were currently working as dental therapists had taken career breaks at some point, the most common reasons for such a break being a change in career and/or child rearing. The respondents expressed a high level of job satisfaction, particularly among older dental therapists. Dental therapy offers a potentially rewarding career in terms of job satisfaction. Any planned increase in the numbers of training places for dental therapists should their role be expanded, for example to include working in general dental practice, would need to take cognisance of the high rate of part-time working and the proportion who could be expected to take career breaks at some point in their working lives, as is the case with female dental practitioners.

[The use of psychoactive remedies by dental students

NARCIS (Netherlands)

Plasschaert, A.J.M.; Hoogstraten, J.; Emmerik, B.J. van

2002-01-01

Dutch dental students were investigated for their attitudes, opinions and actual use of psychoactive substances such as tobacco, alcohol and drugs. A questionnaire from the United States (115 items) was translated and adapted to the Dutch situation and subsequently administered to dental students at

Motivation for a career in dentistry: the views of dental students in the United Arab Emirates.

Science.gov (United States)

Rashid, Hazim; Manoharan, Andiappan; Abufanas, Salem; Gallagher, Jennifer Elizabeth

2013-10-01

To investigate final-year dental students' perceived motivation for choosing dentistry as a professional career at one dental school in the United Arab Emirates (UAE). Final-year dental students of Ajman University (n = 87) completed a questionnaire. Univariate and multivariate analysis of the data were undertaken using statistical software. A response rate of 82% (n = 71) was achieved, 65% of whom were female. Students ranged from 21 to 29 years of age. Motivation to study dentistry was led by a 'desire to work in health care' (93%), 'wish to provide a public service' (88.7%) and because 'degree leads to a recognised job' (84.5%). Males were significantly more likely to report 'high income' (84% vs. 67%; P = 0.01) and females 'influence of family' (80% vs. 60%; P = 0.02) as motivating influences. The reliability and internal consistency of the instrument as calculated by Cronbach's alpha was 0.82. Eight factors explaining the 71% of the variation were: 'professional job factors' (11.7%), 'experience and advice' (9.8%), 'business and financial with independence' (9.7%), 'careers, advice and possibilities' (8.9%), 'knowledge and job security' (8.8%), 'health care, people and public service' (8%), 'family and friends' (7.2%) and 'career in dentistry' (6.9%). Gender was a significant predictor of 'business and financial' factor (b = -0.76; P = 0.003) and age for 'careers in dentistry' (b = -0.18; P = 0.03). Students are motivated by a wide range of factors similar to those found in other studies; however, business features and family influences were significantly associated with gender. © 2013 FDI World Dental Federation.

Shaping dental contract reform: a clinical and cost-effective analysis of incentive-driven commissioning for improved oral health in primary dental care

Science.gov (United States)

Hulme, C; Robinson, P G; Saloniki, E C; Vinall-Collier, K; Baxter, P D; Douglas, G; Gibson, B; Godson, J H; Meads, D; Pavitt, S H

2016-01-01

Objective To evaluate the clinical and cost-effectiveness of a new blended dental contract incentivising improved oral health compared with a traditional dental contract based on units of dental activity (UDAs). Design Non-randomised controlled study. Setting Six UK primary care dental practices, three working under a new blended dental contract; three matched practices under a traditional contract. Participants 550 new adult patients. Interventions A new blended/incentive-driven primary care dentistry contract and service delivery model versus the traditional contract based on UDAs. Main outcome measures Primary outcome was as follows: percentage of sites with gingival bleeding on probing. Secondary outcomes were as follows: extracted and filled teeth (%), caries (International Caries Detection and Assessment System (ICDAS)), oral health-related quality of life (Oral Health Impact Profile-14 (OHIP-14)). Incremental cost-effective ratios used OHIP-14 and quality adjusted life years (QALYs) derived from the EQ-5D-3L. Results At 24 months, 291/550 (53%) patients returned for final assessment; those lost to follow-up attended 6.46 appointments on average (SD 4.80). The primary outcome favoured patients in the blended contract group. Extractions and fillings were more frequent in this group. Blended contracts were financially attractive for the dental provider but carried a higher cost for the service commissioner. Differences in generic health-related quality of life were negligible. Positive changes over time in oral health-related quality of life in both groups were statistically significant. Conclusions This is the first UK study to assess the clinical and cost-effectiveness of a blended contract in primary care dentistry. Although the primary outcome favoured the blended contract, the results are limited because 47% patients did not attend at 24 months. This is consistent with 39% of adults not being regular attenders and 27% only visiting their dentist when

Education About Dental Hygienists' Roles in Public Dental Prevention Programs: Dental and Dental Hygiene Students' and Faculty Members' and Dental Hygienists' Perspectives.

Science.gov (United States)

Pervez, Anushey; Kinney, Janet S; Gwozdek, Anne; Farrell, Christine M; Inglehart, Marita R

2016-09-01

In 2005, Public Act No. 161 (PA 161) was passed in Michigan, allowing dental hygienists to practice in approved public dental prevention programs to provide services for underserved populations while utilizing a collaborative agreement with a supervising dentist. The aims of this study were to assess how well dental and dental hygiene students and faculty members and practicing dental hygienists have been educated about PA 161, what attitudes and knowledge about the act they have, and how interested they are in additional education about it. University of Michigan dental and dental hygiene students and faculty members, students in other Michigan dental hygiene programs, and dental hygienists in the state were surveyed. Respondents (response rate) were 160 dental students (50%), 63 dental hygiene students (82%), 30 dental faculty members (26%), and 12 dental hygiene faculty members (52%) at the University of Michigan; 143 dental hygiene students in other programs (20%); and 95 members of the Michigan Dental Hygienists' Association (10%). The results showed that the dental students were less educated about PA 161 than the dental hygiene students, and the dental faculty members were less informed than the dental hygiene faculty members and dental hygienists. Responding dental hygiene faculty members and dental hygienists had more positive attitudes about PA 161 than did the students and dental faculty members. Most of the dental hygiene faculty members and dental hygienists knew a person providing services in a PA 161 program. Most dental hygiene students, faculty members, and dental hygienists wanted more education about PA 161. Overall, the better educated about the program the respondents were, the more positive their attitudes, and the more interested they were in learning more.

Evaluation of radiation effects on dental enamel hardness and dental restorative materials

International Nuclear Information System (INIS)

Adachi, Lena Katekawa; Saiki, Mitiko; Campos, Tomie Nakakuki

2000-01-01

This research presents the results of the microhardness of human dental enamel and of the following dental restorative materials: three dental porcelains - Ceramco II, Finesse and Noritake, and two resin restorative materials - Artglass and Targis, for materials submitted to different times of irradiation at the IEA-R1m nuclear reactor under a thermal neutron flux of 10 12 n cm -2 .s -1 . The results obtained indicated that there is a decrease of the surface microhardness when the enamel is irradiated for 1 h and when dental materials are irradiated for 3 h. However, enamels irradiated for 30 min. did not show significant change of their surface hardness. Therefore, the selection of irradiation time is an important factor to be considered when irradiated teeth or dental materials are used in the investigations of their properties. (author)

Influence of core design, production technique, and material selection on fracture behavior of yttria-stabilized tetragonal zirconia polycrystal fixed dental prostheses produced using different multilayer techniques: split-file, over-pressing, and manually built-up veneers.

Science.gov (United States)

Mahmood, Deyar Jallal Hadi; Linderoth, Ewa H; Wennerberg, Ann; Vult Von Steyern, Per

2016-01-01

To investigate and compare the fracture strength and fracture mode in eleven groups of currently, the most commonly used multilayer three-unit all-ceramic yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) fixed dental prostheses (FDPs) with respect to the choice of core material, veneering material area, manufacturing technique, design of connectors, and radii of curvature of FDP cores. A total of 110 three-unit Y-TZP FDP cores with one intermediate pontic were made. The FDP cores in groups 1-7 were made with a split-file design, veneered with manually built-up porcelain, computer-aided design-on veneers, and over-pressed veneers. Groups 8-11 consisted of FDPs with a state-of-the-art design, veneered with manually built-up porcelain. All the FDP cores were subjected to simulated aging and finally loaded to fracture. There was a significant difference (Pdesigns, but not between the different types of Y-TZP materials. The split-file designs with VITABLOCS(®) (1,806±165 N) and e.max(®) ZirPress (1,854±115 N) and the state-of-the-art design with VITA VM(®) 9 (1,849±150 N) demonstrated the highest mean fracture values. The shape of a split-file designed all-ceramic reconstruction calls for a different dimension protocol, compared to traditionally shaped ones, as the split-file design leads to sharp approximal indentations acting as fractural impressions, thus decreasing the overall strength. The design of a framework is a crucial factor for the load bearing capacity of an all-ceramic FDP. The state-of-the-art design is preferable since the split-file designed cores call for a cross-sectional connector area at least 42% larger, to have the same load bearing capacity as the state-of-the-art designed cores. All veneering materials and techniques tested in the study, split-file, over-press, built-up porcelains, and glass-ceramics are, with a great safety margin, sufficient for clinical use both anteriorly and posteriorly. Analysis of the fracture pattern shows

Prefabricated fibula free flap with dental implants for mandibular reconstruction.

Science.gov (United States)

Pauchet, D; Pigot, J-L; Chabolle, F; Bach, C-A

2018-03-02

Free fibula transplant is routinely used for mandibular reconstruction in head and neck cancer. Dental rehabilitation, the objective of mandibular reconstruction, requires the use of dental implants as supports for fixed or removable dentures. Positioning of fibular bone grafts and implants determines implant osseointegration and the possibilities of dental rehabilitation. Prefabrication of a fibula free flap with dental implants prior to harvesting as a free flap can promote implant osseointegration. The position of the implants must then be precisely planned. Virtual surgery and computer-assisted design and prefabrication techniques are used to plan the reconstruction and then reproduce this planning by means of tailored fibula and mandible cutting guides, thereby ensuring correct positioning of fibular bone fragments and implants. The prefabricated fibula free flap technique requires two surgical procedures (prefabrication and flap transfer) and precise preoperative planning. Prefabricated fibula free flap with dental implants, by improving the quality of osseointegration of the implants before flap transfer, extends the possibilities of prosthetic rehabilitation in complex secondary mandibular reconstructions. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

Patient-centred care in general dental practice - a systematic review of the literature

Science.gov (United States)

2014-01-01

Background Delivering improvements in quality is a key objective within most healthcare systems, and a view which has been widely embraced within the NHS in the United Kingdom. Within the NHS, quality is evaluated across three key dimensions: clinical effectiveness, safety and patient experience, with the latter modelled on the Picker Principles of Patient-Centred Care (PCC). Quality improvement is an important feature of the current dental contract reforms in England, with “patient experience” likely to have a central role in the evaluation of quality. An understanding and appreciation of the evidence underpinning PCC within dentistry is highly relevant if we are to use this as a measure of quality in general dental practice. Methods A systematic review of the literature was undertaken to identify the features of PCC relevant to dentistry and ascertain the current research evidence base underpinning its use as a measure of quality within general dental practice. Results Three papers were identified which met the inclusion criteria and demonstrated the use of primary research to provide an understanding of the key features of PCC within dentistry. None of the papers identified were based in general dental practice and none of the three studies sought the views of patients. Some distinct differences were noted between the key features of PCC reported within the dental literature and those developed within the NHS Patient Experience Framework. Conclusions This systematic review reveals a lack of understanding of PCC within dentistry, and in particular general dental practice. There is currently a poor evidence base to support the use of the current patient reported outcome measures as indicators of patient-centredness. Further research is necessary to understand the important features of PCC in dentistry and patients’ views should be central to this research. PMID:24902842

The quality of impressions for crowns and bridges: an assessment of the work received at three commercial dental laboratories. assessing qualities of impressions that may lead to occlusal discrepancies with indirect restorations.

Science.gov (United States)

Storey, D; Coward, T J

2014-03-01

There are few published studies that directly assess the quality of impressions for crowns and bridges in the UK. This paper considers aspects of impression quality with particular attention to factors causing potential occlusal discrepancies in the final restoration. To this end three dental laboratories were visited over a 3-month period. All impressions for conventional crown and bridgework that arrived on the days of the visits were examined and assessed against criteria defined on a custom-designed assessment form. A total of 206 impression cases were considered in this study. Flexible impression trays were used for 65% of working impressions. Their use was more common for NHS work than for private work. 31.9% of all alginate impressions examined were not adequately fixed to the tray. Visible contamination of impressions was not uncommon.

Three-dimensional finite element analysis of zirconia all-ceramic cantilevered fixed partial dentures with different framework designs.

Science.gov (United States)

Miura, Shoko; Kasahara, Shin; Yamauchi, Shinobu; Egusa, Hiroshi

2017-06-01

The purpose of this study were: to perform stress analyses using three-dimensional finite element analysis methods; to analyze the mechanical stress of different framework designs; and to investigate framework designs that will provide for the long-term stability of both cantilevered fixed partial dentures (FPDs) and abutment teeth. An analysis model was prepared for three units of cantilevered FPDs that assume a missing mandibular first molar. Four types of framework design (Design 1, basic type; Design 2, framework width expanded buccolingually by 2 mm; Design 3, framework height expanded by 0.5 mm to the occlusal surface side from the end abutment to the connector area; and Design 4, a combination of Designs 2 and 3) were created. Two types of framework material (yttrium-oxide partially stabilized zirconia and a high precious noble metal gold alloy) and two types of abutment material (dentin and brass) were used. In the framework designs, Design 1 exhibited the highest maximum principal stress value for both zirconia and gold alloy. In the abutment tooth, Design 3 exhibited the highest maximum principal stress value for all abutment teeth. In the present study, Design 4 (the design with expanded framework height and framework width) could contribute to preventing the concentration of stress and protecting abutment teeth. © 2017 Eur J Oral Sci.

An evaluation of clinical, radiological and three-dimensional dental tomography findings in ectodermal dysplasia cases.

Science.gov (United States)

Doğan, Mehmet-Sinan; Callea, Michele; Yavuz, Ìzzet; Aksoy, Orhan; Clarich, Gabriella; Günay, Ayse; Günay, Ahmet; Güven, Sedat; Maglione, Michele; Akkuş, Zeki

2015-05-01

This study aimed to review the results related to head and jaw disorders in cases of ectodermal dysplasia. The evaluation of ectodermal dysplasia cases was made by clinical examination and examination of the jaw and facial areas radiologically and on cone-beam 3-dimensional dental tomography (CBCT) images. In the 36 cases evaluated in the study, typical clinical findings of pure hypohidrotic ectodermal displasia (HED) were seen, such as missing teeth, dry skin, hair and nail disorders. CBCT images were obtained from 12 of the 36 cases, aged 1.5- 45 years, and orthodontic analyses were made on these images. The clinical and radiological evaluations determined, hypodontia or oligodontia, breathing problems, sweating problems, a history of fever, sparse hair, saddle nose, skin peeling, hypopigmentation, hyperpigmentation, finger and nail deformities, conical teeth anomalies, abnormal tooth root formation, tooth resorption in the root, gingivitis, history of epilepsy, absent lachrymal canals and vision problems in the cases which included to the study. Ectodermal dysplasia cases have a particular place in dentistry and require a professional, multi-disciplinary approach in respect of the chewing function, orthognathic problems, growth, oral and dental health. It has been understood that with data obtained from modern technologies such as three-dimensional dental tomography and the treatments applied, the quality of life of these cases can be improved.

Effects of mandibular protraction appliance associated to fixed appliance in adults

Directory of Open Access Journals (Sweden)

Bruno D'Aurea Furquim

2013-10-01

Full Text Available OBJECTIVE: This retrospective study aimed to conduct a cephalometric evaluation of the skeletal, dental and soft tissue effects resulting from treatment of adult patients presenting Class II malocclusion, performed with a Mandibular Protraction Appliance (MPA combined with a fixed orthodontic appliance. METHODS: The sample consisted of teleradiographs obtained before and after treatment of 9 adult patients (initial mean age of 22.48 years with bilateral Class II, division 1, malocclusion. Paired t test (p < 0.05 was applied to compare initial and final values. RESULTS: t test revealed an increase in anteroinferior facial height and posterior facial height. The dental changes include: extrusion of upper incisors, buccal inclination, protrusion of lower incisors, mesialization and extrusion of mandibular molars. Regarding the soft tissue component, there was an increase in nasolabial angle in addition to upper lip retrusion. CONCLUSIONS: The effects of treating Class II malocclusion adult patients, by means of using Mandibular Protraction Appliance (MPA combined with a fixed appliance were mostly observed in the mandibular arch, and consisted of buccal inclination, protrusion and intrusion of incisors, and mesialization and extrusion of the molars.

Measurement of in-vivo dosage increase due to dental alloys during therapeutic irradiation of the mouth cavity

International Nuclear Information System (INIS)

Thilmann, C.; Mose, S.; Saran, F.; Schopohl, B.; Boettcher, H.D.

1995-01-01

The degree of dosage increase in the immediate surrounding of metallic dental materials was measured in an in-vivo study during therapeutic irradiation with 60 Co gamma rays in the area of mouth cavity of 11 patients. Measurements were carried out by thermoluminescent dosimetry at permamently fixed golden teeth and alloy specimens containing gold and palladium and amalgam. The following relative dodage values according to a simultanelusly measured reference value were measured at the surface of the different dental materials: 161% near fixed golden caps, 168% near the specimen containing gold in a high percentage, 133% near the specimen of palladium and 161% near the specimen of amalgam. The in vivo measured dosage increases due to metallic dental prosthesis are less than values obtained using back scatter arramgements for irradiating phantoms. Despite this, they could be of clinical relevance. Thus the usage of a mucous membrane protection during irradiation with 60 Co, as a means of preventing local lesions of the oral mucosa, due to dental alloys within the treatment volume remains inevitable. (orig.) [de

Mechanical and Thermal Properties of Dental Composites Cured with CAD/CAM Assisted Solid-State Laser

Directory of Open Access Journals (Sweden)

Roberto De Santis

2018-03-01

Full Text Available Over the last three decades, it has been frequently reported that the properties of dental restorative composites cured with argon laser are similar or superior to those achieved with conventional halogen and light emitting diode (LED curing units. Whereas laser curing is not dependent on the distance between the curing unit and the material, such distance represents a drawback for conventional curing units. However, a widespread clinical application of this kind of laser remains difficult due to cost, heavy weight, and bulky size. Recently, with regard to the radiation in the blue region of the spectrum, powerful solid-state lasers have been commercialized. In the current research, CAD (computer-aided design/CAM (computer-aided manufacturing assisted solid-state lasers were employed for curing of different dental restorative composites consisting of micro- and nanoparticle-reinforced materials based on acrylic resins. Commercial LED curing units were used as a control. Temperature rise during the photopolymerisation process and bending properties were measured. By providing similar light energy dose, no significant difference in temperature rise was observed when the two light sources provided similar intensity. In addition, after 7 days since curing, bending properties of composites cured with laser and LED were similar. The results suggested that this kind of laser would be suitable for curing dental composites, and the curing process does not suffer from the tip-to-tooth distance.

Mechanical and Thermal Properties of Dental Composites Cured with CAD/CAM Assisted Solid-State Laser

Science.gov (United States)

De Santis, Roberto; Gloria, Antonio; Maietta, Saverio; Martorelli, Massimo; De Luca, Alessandro; Spagnuolo, Gianrico; Riccitiello, Francesco; Rengo, Sandro

2018-01-01

Over the last three decades, it has been frequently reported that the properties of dental restorative composites cured with argon laser are similar or superior to those achieved with conventional halogen and light emitting diode (LED) curing units. Whereas laser curing is not dependent on the distance between the curing unit and the material, such distance represents a drawback for conventional curing units. However, a widespread clinical application of this kind of laser remains difficult due to cost, heavy weight, and bulky size. Recently, with regard to the radiation in the blue region of the spectrum, powerful solid-state lasers have been commercialized. In the current research, CAD (computer-aided design)/CAM (computer-aided manufacturing) assisted solid-state lasers were employed for curing of different dental restorative composites consisting of micro- and nanoparticle-reinforced materials based on acrylic resins. Commercial LED curing units were used as a control. Temperature rise during the photopolymerisation process and bending properties were measured. By providing similar light energy dose, no significant difference in temperature rise was observed when the two light sources provided similar intensity. In addition, after 7 days since curing, bending properties of composites cured with laser and LED were similar. The results suggested that this kind of laser would be suitable for curing dental composites, and the curing process does not suffer from the tip-to-tooth distance. PMID:29584683

[Dental care for foreigners in Hungary].

Science.gov (United States)

Balázs, Péter; Oesterle, August

2008-10-01

High quality elective dental care for foreign patients was not exceptional in Hungary before the collapse of the old regime in 1989. Nevertheless, it became business as usual only in the new era thanks to the open state borders and the international competitive market environment. Unfortunately, no scientific study concerning this phenomenon has been conducted so far, however its professional and economic significance has been indicated by day-to-day experience. Additionally, the term "dental tourism" also used in international scientific papers became a commonplace in Hungary with unfavourable connotations. The present survey was the first to study this phenomenon by scientific standards in the most involved areas, namely in the capital city Budapest and in three counties in the Western Hungarian Region. Data collecting was performed by a self-reported questionnaire sent via conventional mail to all members of the Dental Section of the Hungarian Medical Chamber practicing in those indicated regions. Respond rates were 20.65% in Budapest and 25.34% in Western Hungary. The sample obtained this way, clearly indicated dimensions of cross-border patient migration and its economic significance as well. In Western Hungary 80.81% of foreign patients came from the neighbouring Austria and two out of ten practices realized 40 to 100% of their income out of this business. In Budapest foreign patients' nationality was more diversified. The largest group arrived from the United Kingdom (9.93%). Nevertheless the economic impact of dental tourism in Budapest is not relevant and outbalanced by a considerable domestic demand on the local private market.

The frequency of hepatitis B (HBV) viral markers in sixth year dental students after three years clinical exposure

International Nuclear Information System (INIS)

Buxt, P.; Fairbairn, P.J.M.; Stern, S.R.; Treisman, B.

1981-01-01

The frequency of Hepatitis B viral markers was studied in 40 6th year dental students at the University of the Witwatersrand, Johannesburg, after three years clinical exposure, using the radioimmunoassay technique. Three were anti-HBs positive; none was HBsAg positive. The frequency of the anti-HBs positive cases did not differ significantly from a group of blood donors, nor were there any statistically significant associated risk factors [af

48 CFR 36.207 - Pricing fixed-price construction contracts.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Pricing fixed-price... Contracting for Construction 36.207 Pricing fixed-price construction contracts. (a) Generally, firm-fixed... methods. (b) Lump-sum pricing shall be used in preference to unit pricing except when— (1) Large...

Effect of dental bleaching after bracket bonding and debonding using three different adhesive systems

Directory of Open Access Journals (Sweden)

Lucianna de Oliveira Gomes

2013-04-01

Full Text Available OBJECTIVE: To evaluate the influence of bonding and debonding of orthodontic brackets on dental in-home bleaching, taking into account three different adhesive systems. METHODS: Forty-four bovine incisors were divided into four groups according to the primer system used for orthodontic bracket bonding. Following the debonding of orthodontic brackets, the teeth were stored in staining solution for 96 hours. Then, teeth were whitened using 10% carbamide peroxide for two weeks at a 6-hour-a-day regime. Standardized digital photographs were taken at the following intervals: T0 (initial; T1 (after debonding; T2 (after pigmentation; T3, T4 and T5 representing 1, 7, and 14 days of bleaching. Repeatability and stability tests were carried out to check the method accuracy. Images were analyzed using Adobe Photoshop 7.0 software considering (L*a*b*color coordinate values and a modified color difference total (Δ;E'. RESULTS: The results of this study (ANOVA and Tukey; p < 0.01 demonstrated that after 7 days of bleaching, experimental groups showed significantly less teeth whitening compared to the control group. However, there were no significant color differences between the groups after 14 days, according to values of lightness (L*. CONCLUSIONS: Regardless of the adhesive primer system applied, bonding and debonding of orthodontic brackets alters the outcome of tooth whitening in the first 7 days of bleaching, however it has no influence on the whitening of the dental structure after 14 days of in-home dental bleaching with 10% carbamide peroxide.

Is dosimetry still a necessity in current dental practice?

International Nuclear Information System (INIS)

Reddy, S S; Rakesh, N; Clint, Joseph Ben; Sharma, Shivani; Chauhan, Pallavi

2015-01-01

Today, dentists have a wide range of imaging modalities to choose from, the film based techniques, digital techniques, and the recent introduction of 3D volumetric or cone beam computed tomography (CBCT). The inherent design features of the new generation dental x-ray equipment has significantly improved over the years with no evidence of substandard x-ray units in operation. In dental facilities radiological workload is comparatively low, newer radiation equipments and accessories follow safety guidelines and employ better radiation protection measures for the patient and the operator. Dentists’ knowledge and expertise in radiation protection measures is good, enabling them to carry out riskfree radiation procedures in their practice. Therefore, the present study is aimed at assessing the need for dosimeters in current dental scenario.‘Is there currently a significant risk from dental radiography to merit the use of personal dosimetery in dental practice.’Dental health professionals (Oral radiologists) and radiographic assistants of fourteen dental colleges in Karnataka state participated in this questionnaire study. The questionnaire consisted of the following questions—the make, type, year of manufacture of radiographic machines used in their setup, number of radiographs made per day in the institution, type of receptors used, number of personnel at risk for radiation exposure, radiation protection measures used, regular monitoring by personal dosimeters, equivalent dosage readings for the past 12 months and whether the reading of thermoluminescent dosimeters (TLD) for any personnel had exceeded the recommended exposure value in the last 3 years.Dosimetry records of the radiology staff in the last three years shows doses no more than 1.50 mSv per year. The various institutions’ dose (person mSv) was in the range of 3.70 mSv–3.90 mSv.Personal monitoring for Dentists can be omitted in the dental colleges since the estimated dose of oral radiologists

Evaluation of patients with oral lichenoid lesions by dental patch testing and results of removal of the dental restoration material

Directory of Open Access Journals (Sweden)

Emine Buket Şahin

2016-12-01

Full Text Available Background and Design: Oral lichenoid lesions (OLL are contact stomatitis characterized by white reticular or erosive patches, plaque-like lesions that are clinically and histopathologically indistinguishable from oral lichen planus (OLP. Amalgam dental fillings and dental restoration materials are among the etiologic agents. In the present study, it was aimed to evaluate the standard and dental series patch tests in patients with OLL in comparison to a control group and evaluate our results. Materials and Methods: Thirty-three patients with OLL or OLP and 30 healthy control subjects, who had at least one dental restoration material and/or dental filling, were included in the study. Both groups received standard series and dental patch test and the results were evaluated simultaneously. Results: The most frequent allergens in the dental series patch test in the patient group were palladium chloride (n=4; 12.12% and benzoyl peroxide (n=2, 6.06%. Of the 33 patients with OLL; 8 had positive reaction to allergents in the standard patch test series and 8 had positive reaction in the dental patch test series. There was no significant difference in the rate of patch test reaction to the dental and standard series between the groups. Ten patients were advised to have the dental restoration material removed according to the results of the patch tests. The lesions improved in three patients [removal of all amalgam dental fillings (n=1, replacement of all amalgam dental fillings with an alternative filling material (n=1 and replacement of the dental prosthesis (n=1] following the removal or replacement of the dental restoration material. Conclusion: Dental patch test should be performed in patients with OLL and dental restoration material. Dental filling and/or prosthesis should be removed/replaced if there is a reaction against a dental restoration material-related allergen.

Dental Calculus Arrest of Dental Caries.

Science.gov (United States)

Keyes, Paul H; Rams, Thomas E

An inverse relationship between dental calculus mineralization and dental caries demineralization on teeth has been noted in some studies. Dental calculus may even form superficial layers over existing dental caries and arrest their progression, but this phenomenon has been only rarely documented and infrequently considered in the field of Cariology. To further assess the occurrence of dental calculus arrest of dental caries, this study evaluated a large number of extracted human teeth for the presence and location of dental caries, dental calculus, and dental plaque biofilms. A total of 1,200 teeth were preserved in 10% buffered formal saline, and viewed while moist by a single experienced examiner using a research stereomicroscope at 15-25× magnification. Representative teeth were sectioned and photographed, and their dental plaque biofilms subjected to gram-stain examination with light microscopy at 100× magnification. Dental calculus was observed on 1,140 (95%) of the extracted human teeth, and no dental carious lesions were found underlying dental calculus-covered surfaces on 1,139 of these teeth. However, dental calculus arrest of dental caries was found on one (0.54%) of 187 evaluated teeth that presented with unrestored proximal enamel caries. On the distal surface of a maxillary premolar tooth, dental calculus mineralization filled the outer surface cavitation of an incipient dental caries lesion. The dental calculus-covered carious lesion extended only slightly into enamel, and exhibited a brown pigmentation characteristic of inactive or arrested dental caries. In contrast, the tooth's mesial surface, without a superficial layer of dental calculus, had a large carious lesion going through enamel and deep into dentin. These observations further document the potential protective effects of dental calculus mineralization against dental caries.

Dental Calculus Arrest of Dental Caries

Science.gov (United States)

Keyes, Paul H.; Rams, Thomas E.

2016-01-01

Background An inverse relationship between dental calculus mineralization and dental caries demineralization on teeth has been noted in some studies. Dental calculus may even form superficial layers over existing dental caries and arrest their progression, but this phenomenon has been only rarely documented and infrequently considered in the field of Cariology. To further assess the occurrence of dental calculus arrest of dental caries, this study evaluated a large number of extracted human teeth for the presence and location of dental caries, dental calculus, and dental plaque biofilms. Materials and methods A total of 1,200 teeth were preserved in 10% buffered formal saline, and viewed while moist by a single experienced examiner using a research stereomicroscope at 15-25× magnification. Representative teeth were sectioned and photographed, and their dental plaque biofilms subjected to gram-stain examination with light microscopy at 100× magnification. Results Dental calculus was observed on 1,140 (95%) of the extracted human teeth, and no dental carious lesions were found underlying dental calculus-covered surfaces on 1,139 of these teeth. However, dental calculus arrest of dental caries was found on one (0.54%) of 187 evaluated teeth that presented with unrestored proximal enamel caries. On the distal surface of a maxillary premolar tooth, dental calculus mineralization filled the outer surface cavitation of an incipient dental caries lesion. The dental calculus-covered carious lesion extended only slightly into enamel, and exhibited a brown pigmentation characteristic of inactive or arrested dental caries. In contrast, the tooth's mesial surface, without a superficial layer of dental calculus, had a large carious lesion going through enamel and deep into dentin. Conclusions These observations further document the potential protective effects of dental calculus mineralization against dental caries. PMID:27446993

Combination of three-dimensional laser scanning and digital photogrammetric shoot for fixing and measurement of architectural monuments

OpenAIRE

S.V. Tiurin; S.G. Tihonov

2010-01-01

Several variants of architectural monument fixing using photogrammetric method are considered: black-and-white and colour three-dimensional point models; black-and-white and colour orthophotomaps in format SPO; black-and-white and colour orthophotomaps in standard raster formats. For different aims authors recommend corresponding data formats.

Trabecular bone strains around a dental implant and associated micromotions--a micro-CT-based three-dimensional finite element study.

NARCIS (Netherlands)

Limbert, G.; Lierde, C. van; Muraru, O.L.; Walboomers, X.F.; Frank, M.; Hansson, S.; Middleton, J.; Jaecques, S.

2010-01-01

The first objective of this computational study was to assess the strain magnitude and distribution within the three-dimensional (3D) trabecular bone structure around an osseointegrated dental implant loaded axially. The second objective was to investigate the relative micromotions between the

Social capital and dental pain in Brazilian northeast: a multilevel cross-sectional study

Directory of Open Access Journals (Sweden)

Santiago Bianca Marques

2013-01-01

Full Text Available Abstract Background There is limited evidence on possible associations between social determinants and dental pain. This study investigated the relationship of neighborhood and individual social capital with dental pain in adolescents, adults and the elderly. Methods A population-based multilevel study was conducted involving 624 subjects from 3 age groups: 15–19, 35–44 and 65–74 years. They were randomly selected from 30 census tracts in three cities in the State of Paraíba, Brazil. A two-stage cluster sampling was used considering census tracts and households as sampling units. The outcome of study was the presence of dental pain in the last 6 months. Information on dental pain, demographic, socio-economic, health-related behaviors, use of dental services, self-perceived oral health and social capital measures was collected through interviews. Participants underwent a clinical examination for assessment of dental caries. Neighborhood social capital was evaluated using aggregated measures of social trust, social control, empowerment, political efficacy and neighborhood safety. Individual social capital assessment included bonding and bridging social capital. Multilevel logistic regression was used to test the relationship of neighborhood and individual social capital with dental pain after sequential adjustment for covariates. Results Individuals living in neighborhoods with high social capital were 52% less likely to report dental pain than those living in neighborhoods with low social capital (OR = 0.48, 95% CI = 0.27-0.85. Bonding social capital (positive interaction was independently associated with dental pain (OR = 0.88, 95% CI = 0.80-0.91. Last dental visit, self-perceived oral health and number of decayed teeth were also significantly associated with dental pain. Conclusions Our findings suggest that contextual and individual social capital are independently associated with dental pain.

Results of a QC program on dental radiography in Greece

International Nuclear Information System (INIS)

Pappous, George; Kolitsi, Zoi; Pallikarakis, Nikolas; Arvanitakis, Gerasimos

1998-01-01

Quality Control (QC) performed on 99 intraoral dental X-Ray units, installed in equal in number dental offices, at the Achaia prefecture, a region of south west Greece. The QC procedure includes collection of general information, radiation safety checks, beam qualitative and quantitative characteristic checks, and film processing checks, according to international established protocols. The collected data are characterised by a non-uniformity and in some cases indicate a poor performance level. The results of the study on a representative sample of dental X-Ray units helps to map the existing situation and may be useful in the reviewing and optimisation of the applied process. (authors)

Results of a QC program on dental radiography in Greece

Energy Technology Data Exchange (ETDEWEB)

Pappous, George; Kolitsi, Zoi; Pallikarakis, Nikolas [Medical Physics Department, Patras University, 26 500 Patras (Greece); Arvanitakis, Gerasimos [Achaia branch of Hellenic Dental Association, Pantanasis 70-72, 262 21 (Greece)

1999-12-31

Quality Control (QC) performed on 99 intraoral dental X-Ray units, installed in equal in number dental offices, at the Achaia prefecture, a region of south west Greece. The QC procedure includes collection of general information, radiation safety checks, beam qualitative and quantitative characteristic checks, and film processing checks, according to international established protocols. The collected data are characterised by a non-uniformity and in some cases indicate a poor performance level. The results of the study on a representative sample of dental X-Ray units helps to map the existing situation and may be useful in the reviewing and optimisation of the applied process. (authors) 10 refs., 11 figs.

The demand for preventive and restorative dental services.

Science.gov (United States)

Meyerhoefer, Chad D; Zuvekas, Samuel H; Manski, Richard

2014-01-01

Chronic tooth decay is the most common chronic condition in the United States among children ages 5-17 and also affects a large percentage of adults. Oral health conditions are preventable, but less than half of the US population uses dental services annually. We seek to examine the extent to which limited dental coverage and high out-of-pocket costs reduce dental service use by the nonelderly privately insured and uninsured. Using data from the 2001-2006 Medical Expenditure Panel Survey and an American Dental Association survey of dental procedure prices, we jointly estimate the probability of using preventive and both basic and major restorative services through a correlated random effects specification that controls for endogeneity. We found that dental coverage increased the probability of preventive care use by 19% and the use of restorative services 11% to 16%. Both conditional and unconditional on dental coverage, the use of dental services was not sensitive to out-of-pocket costs. We conclude that dental coverage is an important determinant of preventive dental service use, but other nonprice factors related to consumer preferences, especially education, are equal if not stronger determinants. Copyright © 2013 John Wiley & Sons, Ltd.

New 3D technologies applied to assess the long-term clinical effects of misfit of the full jaw fixed prosthesis on dental implants.

Science.gov (United States)

Jokstad, Asbjørn; Shokati, Babak

2015-10-01

To assess implant:suprastructure misfit in patients with an edentulous jaw restored by an implant-retained fixed dental prosthesis (FDP) and its association with biologic and mechanical adverse events over an extensive period. Thirty patients with an edentulous mandible treated with implant-supported prosthetics before 2000 were examined clinically in 2012. Each patient had received 4 to 6 implants to retain a FDP made from acrylic and three different metal alloys, that is, Ag-Pd, Pd-Ag, and Au type IV. The implant intra-oral locations were recorded digitally by use of an intra-oral scanner, and the intaglio surface of the detached FDP was recorded using a desktop scanner. The fit was estimated by digital matching of the STL files using industrial metrological software. The average misfit was correlated with the average marginal bone loss and the prevalence of screw loosening or fractures, using the patient as the statistical unit. Over an average of 19 years (range 12 to 32), 5 implants had been lost in 4 participants (96.7% implant survival) and 8 eight prostheses (26.7%) had been remade. Anaverage misfit was 150 μm (SD 35, range 95-232, CI 138-163). An average marginal bone loss of 2.2 mm (SD = 0.7) had occurred (range 0.6 to 5.8 mm) for individual implants. The correlation between framework misfit and marginal bone loss was weak (R² = 0.04) (P = 0.29). The prostheses with a history of screw-related adverse events showed average misfit of 169 μm (SD = 32) vs. those with no history of screw-related adverse events, that is, 134 μm (SD = 30) (P = 0.005, Student's t-test). Fourteen of the 30 participants had experienced at least one incidence of screw loosening or fracture of prosthetic or abutment screw(s) over the period of follow-up. The occurrence among the frameworks fabricated with different metal alloys did not differ (P > 0.05, Fisher's exact test). Combining STL files with best-fit algorithms to appraise misfit is feasible using

Fifty years of Brazilian Dental Materials Group: scientific contributions of dental materials field evaluated by systematic review.

Science.gov (United States)

Rosa, Wellington Luiz de Oliveira; Silva, Tiago Machado; Lima, Giana da Silveira; Silva, Adriana Fernandes; Piva, Evandro

2016-01-01

A systematic review was conducted to analyze Brazilian scientific and technological production related to the dental materials field over the past 50 years. This study followed the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (Prisma) statement. Searches were performed until December 2014 in six databases: MedLine (PubMed), Scopus, LILACS, IBECS, BBO, and the Cochrane Library. Additionally, the Brazilian patent database (INPI - Instituto Nacional de Propriedade Industrial) was screened in order to get an overview of Brazilian technological development in the dental materials field. Two reviewers independently analyzed the documents. Only studies and patents related to dental materials were included in this review. Data regarding the material category, dental specialty, number of documents and patents, filiation countries, and the number of citations were tabulated and analyzed in Microsoft Office Excel (Microsoft Corporation, Redmond, Washington, United States). A total of 115,806 studies and 53 patents were related to dental materials and were included in this review. Brazil had 8% affiliation in studies related to dental materials, and the majority of the papers published were related to dental implants (1,137 papers), synthetic resins (681 papers), dental cements (440 papers), dental alloys (392 papers) and dental adhesives (361 papers). The Brazilian technological development with patented dental materials was smaller than the scientific production. The most patented type of material was dental alloys (11 patents), followed by dental implants (8 patents) and composite resins (7 patents). Dental materials science has had a substantial number of records, demonstrating an important presence in scientific and technological development of dentistry. In addition, it is important to approximate the relationship between academia and industry to expand the technological development in countries such as Brazil.

Fifty years of Brazilian Dental Materials Group: scientific contributions of dental materials field evaluated by systematic review

Science.gov (United States)

ROSA, Wellington Luiz de Oliveira; SILVA, Tiago Machado; LIMA, Giana da Silveira; SILVA, Adriana Fernandes; PIVA, Evandro

2016-01-01

ABSTRACT Objective A systematic review was conducted to analyze Brazilian scientific and technological production related to the dental materials field over the past 50 years. Material and Methods This study followed the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (Prisma) statement. Searches were performed until December 2014 in six databases: MedLine (PubMed), Scopus, LILACS, IBECS, BBO, and the Cochrane Library. Additionally, the Brazilian patent database (INPI - Instituto Nacional de Propriedade Industrial) was screened in order to get an overview of Brazilian technological development in the dental materials field. Two reviewers independently analyzed the documents. Only studies and patents related to dental materials were included in this review. Data regarding the material category, dental specialty, number of documents and patents, filiation countries, and the number of citations were tabulated and analyzed in Microsoft Office Excel (Microsoft Corporation, Redmond, Washington, United States). Results A total of 115,806 studies and 53 patents were related to dental materials and were included in this review. Brazil had 8% affiliation in studies related to dental materials, and the majority of the papers published were related to dental implants (1,137 papers), synthetic resins (681 papers), dental cements (440 papers), dental alloys (392 papers) and dental adhesives (361 papers). The Brazilian technological development with patented dental materials was smaller than the scientific production. The most patented type of material was dental alloys (11 patents), followed by dental implants (8 patents) and composite resins (7 patents). Conclusions Dental materials science has had a substantial number of records, demonstrating an important presence in scientific and technological development of dentistry. In addition, it is important to approximate the relationship between academia and industry to expand the technological development in

Influence of Cervitec gel on periodontal health of patients wearing fixed orthodontic appliances

Directory of Open Access Journals (Sweden)

Burcu Özdemir

2014-09-01

Conclusion: The present data suggested that brushing with Cervitec gel once a day has the potential to reduce bacterial accumulation around teeth and fixed appliances in patients undergoing orthodontic treatment. However, within the limits of this study, Cervitec seems to have no significant effect on total bacteria, P.g., and T.d. levels of subgingival dental plaque.

Cellular Responses in Human Dental Pulp Stem Cells Treated with Three Endodontic Materials

Directory of Open Access Journals (Sweden)

Alejandro Victoria-Escandell

2017-01-01

Full Text Available Human dental pulp stem cells (HDPSCs are of special relevance in future regenerative dental therapies. Characterizing cytotoxicity and genotoxicity produced by endodontic materials is required to evaluate the potential for regeneration of injured tissues in future strategies combining regenerative and root canal therapies. This study explores the cytotoxicity and genotoxicity mediated by oxidative stress of three endodontic materials that are widely used on HDPSCs: a mineral trioxide aggregate (MTA-Angelus white, an epoxy resin sealant (AH-Plus cement, and an MTA-based cement sealer (MTA-Fillapex. Cell viability and cell death rate were assessed by flow cytometry. Oxidative stress was measured by OxyBlot. Levels of antioxidant enzymes were evaluated by Western blot. Genotoxicity was studied by quantifying the expression levels of DNA damage sensors such as ATM and RAD53 genes and DNA damage repair sensors such as RAD51 and PARP-1. Results indicate that AH-Plus increased apoptosis, oxidative stress, and genotoxicity markers in HDPSCs. MTA-Fillapex was the most cytotoxic oxidative stress inductor and genotoxic material for HDPSCs at longer times in preincubated cell culture medium, and MTA-Angelus was less cytotoxic and genotoxic than AH-Plus and MTA-Fillapex at all times assayed.

Stress and burnout among Swiss dental residents

OpenAIRE

Divaris, Kimon; Lai, Caroline S; Polychronopoulou, Argy; Eliades, Theodore; Katsaros, Christos

2012-01-01

Stress and burnout have been well-documented in graduate medical and undergraduate dental education, but studies among dental graduate students and residents are sparse. The purpose of this investigation was to examine perceived stressors and three dimensions of burnout among dental residents enrolled in the University of Bern, Switzerland. Thirty-six residents enrolled in five specialty programmes were administered the Graduate Dental Environment Stress (GDES30) questionnaire and the Maslach...

Three-dimensional finite element analysis of different implant configurations for a mandibular fixed prosthesis.

Science.gov (United States)

Fazi, Giovanni; Tellini, Simone; Vangi, Dario; Branchi, Roberto

2011-01-01

The distribution of stresses in bone, implants, and prosthesis were analyzed via three-dimensional finite element modeling in different implant configurations for a fixed implant-supported prosthesis in an edentulous mandible. A finite element model was created with data obtained from computed tomographic scans of a human mandible. Anisotropic characteristics for cortical and cancellous bone were incorporated into the model. Six different configurations of intraforaminal implants were tested, with the number of implants varying from three to five and the distal implants inserted either parallel to the other implants or tilted distally by 17 or 34 degrees. A prosthetic structure connecting the implants was designed, with 20-mm posterior cantilevers for the parallel implant configurations, and a load of 200 N was applied to the distal portion of the cantilevers. Stresses were measured at the level of the implant, the prosthetic structure, and the bone. Bone-level stresses were analyzed at the implant-bone interface, at the external cortical bone surface, distal to the terminal implant, and in the cancellous bone along the implant body. A three-parallel-implant configuration resulted in higher stress in the implant and bone than configurations with four or five parallel implants. Configurations with the distal implants tilted resulted in a more favorable stress distribution at all levels. In parallel-implant configurations for fixed implant-supported mandibular prostheses, four and five implants resulted in similar stress distribution in the bone, framework, and implants. A distribution of four implants with the distal implants tilted 34 degrees (ie, the "All-on-Four" configuration) resulted in a favorable reduction of stresses in the bone, framework, and implants.

A Case Study Optimizing Human Resources in Rwanda's First Dental School: Three Innovative Management Tools.

Science.gov (United States)

Hackley, Donna M; Mumena, Chrispinus H; Gatarayiha, Agnes; Cancedda, Corrado; Barrow, Jane R

2018-06-01

Harvard School of Dental Medicine, University of Maryland School of Dentistry, and the University of Rwanda (UR) are collaborating to create Rwanda's first School of Dentistry as part of the Human Resources for Health (HRH) Rwanda initiative that aims to strengthen the health care system of Rwanda. The HRH oral health team developed three management tools to measure progress in systems-strengthening efforts: 1) the road map is an operations plan for the entire dental school and facilitates delivery of the curriculum and management of human and material resources; 2) each HRH U.S. faculty member develops a work plan with targeted deliverables for his or her rotation, which is facilitated with biweekly flash reports that measure progress and keep the faculty member focused on his or her specific deliverables; and 3) the redesigned HRH twinning model, changed from twinning of an HRH faculty member with a single Rwandan faculty member to twinning with multiple Rwandan faculty members based on shared academic interests and goals, has improved efficiency, heightened engagement of the UR dental faculty, and increased the impact of HRH U.S. faculty members. These new tools enable the team to measure its progress toward the collaborative's goals and understand the successes and challenges in moving toward the planned targets. The tools have been valuable instruments in fostering discussion around priorities and deployment of resources as well as in developing strong relationships, enabling two-way exchange of knowledge, and promoting sustainability.

Establishing the maxillary occlusal plane as a requisite for placement of an immediate implant-supported fixed prosthesis in the mandible: a case report

Directory of Open Access Journals (Sweden)

Milton Edson Miranda

Full Text Available INTRODUCTION: In patients with Bruxism, the attrition can result in excessive occlusal wear that exceeds the compensatory mechanism and loss of occlusion vertical dimension occurs. OBJECTIVE: The purpose of this article is to show the importance of re-establishing an adequate occlusal plane for the non treated arch by means of a fixed acrylic overlay, compatible with the prosthetic treatment of the arch to be rehabilitated. An upper maxillary fixed acrylic overlay restored the patient’s occlusal plane in an appropriate vertical dimension of occlusion together with a fixed prosthesis in the mandible, supported by five dental implants. CONCLUSION: When there is severe wear due to dental attrition in one of the arches, it is important to re-establish the occlusal plane and compensation curves in conjunction with the prosthetic treatment of the arch to be rehabilitated.

Student self-assessment in dental hygiene education: a cornerstone of critical thinking and problem-solving.

Science.gov (United States)

Mould, Michelle R; Bray, Kimberly Krust; Gadbury-Amyot, Cynthia C

2011-08-01

Self-assessment is an integral component of learning and developing decision making and critical thinking skills in the practice of dental hygiene. Dental hygienists must think critically and develop problem-solving strategies during their formal education to ensure lifelong quality and ongoing development of their personal knowledge and skill as related to providing comprehensive, evidence-based patient care. The primary focus of this qualitative investigation was to obtain undergraduate dental hygiene students' perceptions of and experiences with self-assessment. The sample consisted of an intact undergraduate dental hygiene class of seventeen students in their final semester of a two-year, entry-level dental hygiene program at a community college in the southeast United States. Data for this research were obtained from three sources: 1) a program-designed self-assessment survey assignment, 2) in-depth interviews with four second-year dental hygiene students, and 3) program-designed clinical competence evaluation forms. Inductive data analysis revealed that the majority of students perceived that they had no prior experience with self-assessment in any prerequisite coursework and thus felt unprepared for its use in the dental hygiene program. As they matriculated in the program, students began to see the advantages of self-assessment in clinical practice. Programmatic orientation to self-assessment may therefore be beneficial due to the varying backgrounds of students entering dental hygiene programs.

Oral health with fixed appliances orthodontics

Directory of Open Access Journals (Sweden)

Konta, Brigitte

2008-03-01

Full Text Available Orthodontic treatment represents an important fraction in dental interventions. According to other medical methods the question for scientific evidence for the effectiveness of these treatments arises. The question of the effectiveness is connected with the question what is understood as an effect. In principle, the effect of the intervention is understood on the basis of the occlusion or dental health, what disregards further functions of oral health. The generalization to oral health is therefore a necessary consideration in science now. If one appreciates this further development, then there is no one single randomised study available which examines the long-term effect of the orthodontic intervention or for the effects on the oral health. The question, whether the application of a fixed appliance in an orthodontic treatment causes a long-term improvement in oral health, cannot be answered at the present time. The scientific status is the definition of oral health at present. Also the question, whether in the long run the dental health can be improved by fixed appliances cannot be answered with a quality usually achieved by evidence-based medicine. Whether correction of a dental malposition is an effective prerequisite for the preservation of the natural teeth, cannot be answered. There is no generalizing study with sufficient scientific background for Europe or Germany to this topic. The risk for caries cannot be quantified. Caries is identified as a central topic in general but due to numerous factors influencing the risk it is not quantified. The question of the indications is completely open from the scientific literature. For the question of the therapy need or therapy priority some indexes were developed, which lead to a quantification. These indices however are fundamentally criticised by recent research in their meaning and the empirical relevance. There is an impression that there exists a big gap between the practical application

Serious psychological distress as a barrier to dental care in community-dwelling adults in the United States.

Science.gov (United States)

Xiang, Xiaoling; Lee, Wonik; Kang, Sung-wan

2015-01-01

To examine whether serious psychological distress (SPD), a nonspecific indicator of past year mental health problems, was associated with subsequent dental care utilization, dental expenditures, and unmet dental needs. We analyzed data from panel 13 thru 15 of the Medical Expenditure Panel Survey -Household Component (n=31,056). SPD was defined as a score of 13 or higher on the Kessler Psychological Distress Scale (K6). Logistic regression, zero-inflated negative binomial model, and generalized linear model (GLM) with a gamma distribution were used to test the study hypotheses. Adults with SPD had, in the subsequent year, 35 percent lower odds of adhering to annual dental checkups and a twofold increase in the odds of having unmet dental needs. Although adults with SPD did not have significantly more dental visits than those without SPD, they spent 20 percent more on dental care. SPD was a modest independent risk factor for lack of subsequent preventive dental care, greater unmet dental needs, and greater dental expenditures. In addition to expanding adult dental coverage, it is important to develop and evaluate interventions to increase the utilization of dental care particularly preventive dental services among people with mental illness in order to improve oral health and reduce dental expenditures among this vulnerable population. © 2014 American Association of Public Health Dentistry.

Association of tooth brushing behavior with oral hygiene index among students using fixed appliance

Science.gov (United States)

Ria, N.; Eyanoer, P.

2018-03-01

Uses of fixed appliance have become popular recently. The purpose of its use is to correct malposition of teeth in order to normalize the masticatory function and to eliminate the accumulation of food remain between the teeth. These will prevent the formation of caries and any periodontal tissue disease. Fixed appliance patients must routinely maintain their oral hygiene. This study was an analytical survey with cross-sectional design to know the relationship between behavior in tooth brushing of students using thefixed appliance and oral hygiene in Poltekkes Kemenkes Medan. The average of Oral Hygiene Index – Simplified (OHI-S) value of students using fixed appliance (2.68) was still above national target which is ≤2, and there was a relationship between behavior in tooth brushing of students using the fixed appliance and oral hygiene (phygiene and to prevent caries formation and periodontal disease patients using fixed appliances should maintain their dental health.

Costs of a school-based dental mobile service in South Africa.

Science.gov (United States)

Molete, M P; Chola, L; Hofman, K J

2016-10-19

The burden of untreated tooth decay remains high and oral healthcare utilisation is low for the majority of children in South Africa. There is need for alternative methods of improving access to low cost oral healthcare. The mobile dental unit of the University of the Witwatersrand (Wits) has been operational for over 25 years, providing alternative oral healthcare to children and adults who otherwise would not have access. The aim of this study was to conduct a cost-analysis of a school based oral healthcare program in the Wits mobile dental unit. The objectives were to estimate the general costs of the school based program, costs of oral healthcare per patient and the economic implications of providing services at scale. In 2012, the Wits mobile dental unit embarked on a 5 month project to provide oral healthcare in four schools located around Johannesburg. Cost and service use data were retrospectively collected from the program records for the cost analysis, which was undertaken from a provider perspective. The costs considered included both financial and economic costs. Capital costs were annualised and discounted at 6 %. One way sensitivity tests were conducted for uncertain parameters. The total economic costs were R813.701 (US$76,048). The cost of screening and treatment per patient were R331 (US$31) and R743 (US$69) respectively. Furthermore, fissure sealants cost the least out of the treatments provided. The sensitivity analysis indicated that the Wits mobile dental unit was cost efficient at 25 % allocation of staff time and that a Dental Therapy led service could save costs by 9.1 %. Expanding the services to a wider population of children and utilising Dental Therapists as key personnel could improve the efficiency of mobile dental healthcare provision.

Content and goals of preclinical prosthodontic programs at german-language dental schools.

Science.gov (United States)

Hey, Jeremias; Stimmelmayr, Michael; Hirsch, Christian; Beuer, Florian

2014-04-01

The Association for Dental Education in Europe (ADEE) makes recommendations regarding the skills graduates of European dental schools need to achieve and advises dental schools regarding necessary changes to be made to the curriculum. In 2010 to 2011, a survey was conducted in German-language dental schools to validate the curricula and goals of preclinical prosthodontic programs with regard to laboratory work. The survey was mailed to the course instructors of the preclinical programs at 37 dental schools. Of these, 35 schools returned the completed survey, resulting in a response rate of 95%. Bent wire, wax-up exercises, metal-ceramic single crowns, fixed dental prostheses, cast metal single crowns, temporary removable dental prostheses, and full dentures were part of the dental laboratory work at most schools; however, most instructors considered laboratory work as less important, and there were few similarities among the programs in this area. According to the instructors responsible for preclinical education, honing of fine motor skills, realistic self-assessment, and the ability to work independently were the main goals of the programs. The results of this survey show that with regard to laboratory work, there were more differences than similarities among preclinical prosthodontic programs at German-language dental schools, contrary to the recommendations of the ADEE. These findings should be taken into account when program reforms are planned. © 2013 by the American College of Prosthodontists.

Settling time of dental x-ray tube head after positioning

International Nuclear Information System (INIS)

Yun, Suk Ja; Kang, Byung Cheol; Wang, Se Myung; Koh, Chang Sung

2002-01-01

The aim of this study was to introduce a method of obtaining the oscillation graphs of the dental x-ray tube heads relative to time using an accelerometer. An Accelerometer, Piezotron type 8704B25 (Kistler Instrument Co., Amherst, NY, USA) was utilized to measure the horizontal oscillation of the x-ray tube head immediately after positioning the tube head for an intraoral radiograph. The signal from the sensor was transferred to a dynamic signal analyzer, which displayed the magnitude of the acceleration on the Y-axis and time lapse on the X-axis. The horizontal oscillation of the tube head was measured relative to time, and the settling time was also determined on the basis of the acceleration graphs for 6 wall type, 5 floor-fixed type, and 4 mobile type dental x-ray machines. The oscillation graphs showed that tube head movement decreased rapidly over time. The settling time varied with x-ray machine types. Wall-type x-ray machines had a settling time of up to 6 seconds, 5 seconds for fixed floor-types, and 11 seconds for the mobile-types. Using an accelerometer, we obtained the oscillation graphs of the dental x-ray tube head relative to time. The oscillation graph with time can guide the operator to decide upon the optimum exposure moment after xray tube head positioning for better radiographic resolution.

Settling time of dental x-ray tube head after positioning

Energy Technology Data Exchange (ETDEWEB)

Yun, Suk Ja; Kang, Byung Cheol [Department of Oral and Maxillofacial Radiology, Chonnam National University, Gwangju (Korea, Republic of); Wang, Se Myung; Koh, Chang Sung [Department of Mechatronics, Kwangju Institute of Science and Technology, Gwangju (Korea, Republic of)

2002-09-15

The aim of this study was to introduce a method of obtaining the oscillation graphs of the dental x-ray tube heads relative to time using an accelerometer. An Accelerometer, Piezotron type 8704B25 (Kistler Instrument Co., Amherst, NY, USA) was utilized to measure the horizontal oscillation of the x-ray tube head immediately after positioning the tube head for an intraoral radiograph. The signal from the sensor was transferred to a dynamic signal analyzer, which displayed the magnitude of the acceleration on the Y-axis and time lapse on the X-axis. The horizontal oscillation of the tube head was measured relative to time, and the settling time was also determined on the basis of the acceleration graphs for 6 wall type, 5 floor-fixed type, and 4 mobile type dental x-ray machines. The oscillation graphs showed that tube head movement decreased rapidly over time. The settling time varied with x-ray machine types. Wall-type x-ray machines had a settling time of up to 6 seconds, 5 seconds for fixed floor-types, and 11 seconds for the mobile-types. Using an accelerometer, we obtained the oscillation graphs of the dental x-ray tube head relative to time. The oscillation graph with time can guide the operator to decide upon the optimum exposure moment after xray tube head positioning for better radiographic resolution.

Masking functions and fixed-signal functions for low-level 1000-Hz tones.

Science.gov (United States)

Shepherd, Daniel; Hautus, Michael J; Jesteadt, Walt

2013-06-01

Masking functions and fixed-signal functions were constructed using a narrow range of pedestal intensities for 10-ms, 1000-Hz gated tones. Data from three experiments agreed with previously reported data, clearly demonstrating negative masking and the pedestal effect. The data extend earlier findings by showing (1) the resilience of the pedestal effect when a background noise masker is introduced; (2) a possible indifference of the fixed-signal function to stimulus duration; (3) the ability of a set of psychometric functions to produce both masking and fixed-signal functions; (4) depending on method, the impact of unit choice on the interpretation of both the pedestal effect and negative masking data. Results are discussed in relation to current psychophysical models, and suggest that accounting for the auditory system's sensitivity to differences in low-level sounds remains a challenge.

Colour preference between adults and children during a dental treatment session.

Science.gov (United States)

Oner Ozdas, Didem; Kazak, Magrur

2017-02-01

It is evidently shown that colour has physical, psychological and sociological effects on human beings. There are many studies showing the effects of colours on brain activity. Colour preferences may change from childhood to adulthood and are significantly different in various age groups. The aim of this study was to evaluate the adults and children in their preference for mouthrinses in various colours under stress condition during a dental treatment session. 240 adults and 263 children were included in the study. Three transparent cups were filled with water, two of which were coloured green/pink rinsing by dissolving a tablet in the water. Cups were placed near the dental unit. During dental treatment sessions, patients were told to rinse their mouth with whichever cup they preferred. Preferred colour of cup, gender and age of patient, number of sessions were recorded. Data were statistically analysed by SPSS 15.0 programme and chi-square tests. Half of all cases preferred water. In adults, while females statistically significantly preferred water, males chose cups with coloured contents (pcoloured contents in multi-dental treatment sessions, children regularly preferred water (pcolours of cups affected choices made by adults and children. Female adults and children were not interested in trying colourful mouthrinses, while male adults were curious about trying colourful mouthrinses during dental treatment sessions under stress condition. Copyright © 2016 Elsevier Inc. All rights reserved.

Adult Dental Health Survey 2009: relationships between dental attendance patterns, oral health behaviour and the current barriers to dental care.

Science.gov (United States)

Hill, K B; Chadwick, B; Freeman, R; O'Sullivan, I; Murray, J J

2013-01-01

The importance of understanding barriers to dental attendance of adults in the UK was acknowledged in the first Adult Dental Health Survey in 1968 and has been investigated in all subsequent ADH surveys. In 1968, approximately 40% of dentate adults said they attended for a regular check-up; by 2009 this was 61%. Attendance patterns were associated with greater frequency of toothbrushing, use of additional dental hygiene products, lower plaque and calculus levels. Just under three-fifths of adults said they had tried to make an NHS dental appointment in the previous five years. The vast majority (92%) successfully received and attended an appointment, while a further 1% received an appointment but did not attend. The remaining 7% of adults were unable to make an appointment with an NHS dentist. The majority of adults were positive about their last visit to the dentist, with 80% of adults giving no negative feedback about their last dentist visit. Cost and anxiety were important barriers to care. Twenty-six percent of adults said the type of treatment they had opted for in the past had been affected by the cost and 19% said they had delayed dental treatment for the same reason. The 2009 survey data demonstrated a relationship between dental anxiety and dental attendance. Adults with extreme dental anxiety were more likely to attend only when they had trouble with their teeth (22%) than for a regular check-up.

Laser welding by dental Nd:YAG device

Science.gov (United States)

Fornaini, Carlo; Bertrand, Caroline; Merigo, Elisabetta; Bonanini, Mauro; Rocca, Jean-Paul; Nammour, Samir

2009-06-01

Welding laser was introduced in jewellery during years 70 and, just after, was successfully used also by dental technicians. Welding laser gives a great number of advantages, versus traditional welding and, for this reason, this procedure had a great diffusion in the technician laboratories and stimulated the companies to put in the market more and more evolutes appliances. Some aspects, such great dimensions, high costs and delivery system today still characterize these machines by fixed lenses, which have strictly limited its use only to technician laboratories. The aim of this study is to demonstrate the possibility, by using a fibber-delivered laser normally utilized in the dental office, to make, by dentist himself in his office, welding on different metals and to evaluate advantages and possibilities of this new technique.

Ethical checklist for dental practice.

Science.gov (United States)

Rinchuse, D J; Rinchuse, D J; Deluzio, C

1995-01-01

A checklist for verification of unethical business practices, originally formulated by Drs. Blanchard and Peale, is adapted to dental practice. A scenario is used as a model to demonstrate the applicability of this instrument to dental practice. The instrument asks three questions in regards to an ethical dilemma: 1) Is it legal? 2) Is it fair? 3) How does it make you feel? The paper concludes the giving of gifts to general dentists by dental specialists for the referral of patients is unethical.

Clinical evaluation of immediate loading of electroeroded screw-retained titanium fixed prostheses supported by tilted implant: a multicenter retrospective study.

Science.gov (United States)

Acocella, Alessandro; Ercoli, Carlo; Geminiani, Alessandro; Feng, Changyong; Billi, Mauro; Acocella, Gabriele; Giannini, Domenico; Sacco, Roberto

2012-05-01

Immediate occlusal loading of dental implants in the edentulous mandible has proven to be an effective, reliable, and predictable treatment protocol. However, there is limited long-term data available in the literature, when an electroeroded definitive cast-titanium fixed prosthesis is used for this treatment protocol. The aim of this study was to evaluate the clinical effectiveness of dental implants (Astra Tech Dental, Mölndal, Sweden) in the edentulous mandible immediately loaded with an electroeroded cast-titanium screw-retained fixed prosthesis. Forty-five patients received five implants each in the interforaminal area. All the implants were inserted with torque up to 40 Ncm and the distal implants were distally tilted approximately 20 to 30 degrees to minimize the length of posterior cantilevers. Implants were loaded within 48 hours of placement with an acrylic resin-titanium screw-retained prosthesis fabricated by electroerosion. Two of the 225 inserted implants failed after 3 and 16 months of healing, respectively, with a cumulative survival rate of 99.1% and a prosthetic survival rate of 97.8%. Immediate loading of tilted dental implants inserted in the edentulous mandible with a screw-retained titanium definitive prosthesis fabricated with electrical discharge machining provide reliable and predictable results. © 2011 Wiley Periodicals, Inc.

Understanding dental CAD/CAM for restorations--the digital workflow from a mechanical engineering viewpoint.

Science.gov (United States)

Tapie, L; Lebon, N; Mawussi, B; Fron Chabouis, H; Duret, F; Attal, J-P

2015-01-01

As digital technology infiltrates every area of daily life, including the field of medicine, so it is increasingly being introduced into dental practice. Apart from chairside practice, computer-aided design/computer-aided manufacturing (CAD/CAM) solutions are available for creating inlays, crowns, fixed partial dentures (FPDs), implant abutments, and other dental prostheses. CAD/CAM dental solutions can be considered a chain of digital devices and software for the almost automatic design and creation of dental restorations. However, dentists who want to use the technology often do not have the time or knowledge to understand it. A basic knowledge of the CAD/CAM digital workflow for dental restorations can help dentists to grasp the technology and purchase a CAM/CAM system that meets the needs of their office. This article provides a computer-science and mechanical-engineering approach to the CAD/CAM digital workflow to help dentists understand the technology.

State-sponsored dental terrorism?

Science.gov (United States)

Kelleher, M

2017-11-24

Has the state's manipulation of the NHS dental contract systems deliberately, or accidentally, had corrupting effects on the behaviours of some members of the dental profession? If the answer is 'possibly' or 'probably', then obvious questions that follow include, 'was this done deliberately' and if so, 'why'? Could this have been done for largely altruistic reasons, or was it done to achieve government control for minimum cost? Might this have been undertaken for political, financial or ideological reasons - regardless of any adverse longer term consequences for some patients or for some dental professionals? Might it have been done to take greater control of the dental profession on the grounds that all professions are a conspiracy against the laity, as the mildly paranoid George Bernard Shaw once alleged? Is it possible that some of this manipulation might have been done to help to disempower yet another profession, allegedly to 'modernise it', but perhaps to enslave it for its own reasons? Was this just another example of some statist politicians wanting to interfere in all aspects of UK society, regardless of their lack of specific understanding, or any proven expertise, in many areas? Could the state's manipulation of contracts and processes be regarded as an abuse of power by a virtual monopoly, which has been used to control a largely altruistic profession by imposing corrupting NHS dental contract systems with the most recent one involving 'units of dental activity' (UDAs)? Perhaps it was really about some politicians wanting ever more power, control or money - their usual drivers - with the dental and medical professions accidentally becoming casualties?

The biology, prevention, diagnosis and treatment of dental caries: scientific advances in the United States.

Science.gov (United States)

Zero, Domenick T; Fontana, Margherita; Martínez-Mier, E Angeles; Ferreira-Zandoná, Andréa; Ando, Masatoshi; González-Cabezas, Carlos; Bayne, Stephen

2009-09-01

Scientific advances in cariology in the past 150 years have led to the understanding that dental caries is a chronic, dietomicrobial, site-specific disease caused by a shift from protective factors favoring tooth remineralization to destructive factors leading to demineralization. Epidemiologic data indicate that caries has changed in the last century; it now is distributed unequally in the U.S. population. People who are minorities, homeless, migrants, children with disabilities and of lower socioeconomic status suffer from the highest prevalence and severity of dental caries. Scientific advances have led to improvements in the prevention, diagnosis and treatment of dental caries, but there is a need for new diagnostic tools and treatment methods. and Future management of dental caries requires early detection and risk assessment if the profession is to achieve timely and cost-effective prevention and treatment for those who need it most. Dental professionals look forward to the day when people of all ages and backgrounds view dental caries as a disease of the past.

A Dental Hygiene Professional Practice Index (DHPPI) and access to oral health status and service use in the United States.

Science.gov (United States)

Wing, Paul; Langelier, Margaret H; Continelli, Tracey A; Battrell, Ann

2005-01-01

The purpose of this article is to summarize a larger study that developed a statistical index that defines the professional practice environment of dental hygienists (DHs) in the United States, and to determine the extent to which the index scores are related to the number of DHs and dentists, the utilization of dental services, and selected oral health outcomes across the 50 states. A Dental Hygiene Professional Practice Index (DHPPI) defines the professional status, supervision requirements, tasks permitted, and reimbursement options for DHs in each of the 50 states and the District of Columbia, as of December 31, 2001. Spearman rank order correlations between the DHPPI and numbers of oral health professionals, utilization of oral health services, and oral health outcomes in the 50 states are also presented. The analyses revealed that: There are significant differences in the legal practice environments (as reflected in the DHPPI) across the 50 states and the District of Columbia. Between 1990 and 2001, the number of DHs per capita increased by 46% in the United States, while the number of dentists per 100,000 population increased by only 10%. The DHPPI was not significantly correlated with the number of DHs or dentists in the 50 states in 2001. The DHPPI was significantly positively correlated with the salaries of DHs in 2001. The DHPPI was also significantly and positively correlated with a number of indicators of utilization of oral health services and oral health outcomes. Both access to oral health services and oral health outcomes are positively correlated with the DHPPI. This suggests that states with low DHPPI scores would be logical candidates for revised DH practice statutes and regulations to accomplish these objectives.

Maxillary rehabilitation using fixed and removable partial dentures with attachments: a clinical report.

Science.gov (United States)

dos Santos Nunes Reis, José Maurício; da Cruz Perez, Luciano Elias; Alfenas, Bruna Fernandes Moreira; de Oliveira Abi-Rached, Filipe; Filho, João Neudenir Arioli

2014-01-01

Despite requiring dental crown preparation and possible root canal treatment, besides the difficulty of clinical and laboratory repairs, and financial burden, the association between fixed (FPD) and removable partial dentures (RPD) by means of attachments is an important alternative for oral rehabilitation, particularly when the use of dental implants and FPDs is limited or not indicated. Among the advantages of attachment-retained RPDs are the improvements in esthetics and biomechanics, as well as correction of the buccal arrangement of anterior teeth in Kennedy Class III partially edentulous arches. This article describes the treatment sequence and technique for the use of attachments in therapy combining FPD/RPD. © 2013 by the American College of Prosthodontists.

Cross-pinning: the philosophy of retrievability applied practically to fixed, implant-supported prostheses.

Science.gov (United States)

Gervais, M J; Hatzipanagiotis, P; Wilson, P R

2008-03-01

Biologic and technical complications are widely reported in the dental literature and often compromise the functional and/or aesthetic features of fixed, implant-supported prostheses. Managing complications without damaging or destroying a restoration is an obvious advantage of implant-based dentistry where the option of prosthetic retrievability is almost always available. The technique of cross-pinning uses a transverse screw to secure a prosthesis to a milled implant abutment, allowing prosthetic retrievability irrespective of dental implant alignment. This study presents guidelines for cross-pinning implant-supported prostheses based on resistance form, screw mechanics and natural tooth contours. The technical aspects of cross-pinning are also discussed using examples from four implant systems.

Implant loading protocols for edentulous patients with fixed prostheses: a systematic review and meta-analysis.

Science.gov (United States)

Papaspyridakos, Panos; Chen, Chun-Jung; Chuang, Sung-Kiang; Weber, Hans-Peter

2014-01-01

To report on the effect of immediate implant loading with fixed prostheses compared to early and conventional loading on implant and prosthesis survival, failure, and complications. An electronic and manual search was conducted to identify randomized controlled clinical trials (RCTs) as well as prospective and retrospective studies involving rough surface implants and implant fixed complete dental prostheses for edentulous patients. The 62 studies that fulfilled the inclusion criteria featured 4 RCTs, 2 prospective case-control studies, 34 prospective cohort studies, and 22 retrospective cohort studies. These studies yielded data from 2,695 patients (2,757 edentulous arches) with 13,653 implants. Studies were grouped according to the loading protocol applied; 45 studies reported on immediate loading, 8 on early loading, and 11 on conventional loading. For the immediate loading protocol with flap surgery, the implant and prosthesis survival rates ranged from 90.1% to 100% and 93.75% to 100%, respectively (range of follow-up, 1 to 10 years). When immediate loading was combined with guided flapless implant placement, the implant survival rates ranged from 90% to 99.4%. For the early loading protocol, the implant and prosthesis survival rates ranged from 94.74% to 100% and 93.75% to 100%, respectively (range of follow-up, 1 to 10 years). For the conventional loading protocol, the implant and prosthesis survival rates ranged from 94.95% to 100% and 87.5% to 100%, respectively (range of follow-up, 2 to 15 years). No difference was identified between maxilla and mandible. When selecting cases carefully and using dental implants with a rough surface, immediate loading with fixed prostheses in edentulous patients results in similar implant and prosthesis survival and failure rates as early and conventional loading. For immediate loading, most of the studies recommended a minimal insertion torque of 30 Ncm. The estimated 1-year implant survival was above 99% with all three

Dental Care Every Day: A Caregiver's Guide

Science.gov (United States)

DENTAL CARE EVERY DAY A Caregiver’s Guide U.S. DEPARTMENT OF HEALTH AND HUMAN SERVICES NATIONAL INSTITUTES OF HEALTH National Institute of Dental and Craniofacial Research Contents Getting Started ................................................................................ 2 Three ...

The Diversity Dilemma: A National Study of Minorities in Dental Hygiene Programs

Science.gov (United States)

Moore, Tracye A.

2012-01-01

Given the predicted shortages of minority dental healthcare providers in the United States and the expanding diversity of the general population, it is important to recruit and retain an ethnically and culturally diverse allied dental workforce. The objectives of this study were to explore why the profession of dental hygiene exhibits minimal…

A survey of collection development for United States Medical Licensing Examination (USMLE) and National Board Dental Examination (NBDE) preparation material.

Science.gov (United States)

Hendrix, Dean; Hasman, Linda

2008-07-01

The research sought to ascertain medical and dental libraries' collection development policies, evaluation methods, purchase decisions, and issues that relate to print and electronic United States Medical Licensing Examination (USMLE) and National Board Dental Examination (NBDE) preparation materials. The investigators surveyed librarians supporting American Association of Medical Colleges (AAMC)-accredited medical schools (n = 58/125) on the USMLE and librarians supporting American Dental Association (ADA)-accredited dental schools (n = 23/56) on the NBDE. The investigators analyzed the data by cross-tabulating and filtering the results using EFM Continuum web survey software. Investigators also surveyed print and electronic USMLE and NBDE preparation materials from 2004-2007 to determine the number of publications and existence of reviews. A majority of responding AAMC libraries (62%, n = 58) provide at least 1 electronic or online USMLE preparation resource and buy an average of 11.6 print USMLE titles annually. Due to a paucity of NBDE print and electronic resources, ADA libraries bought significantly fewer print resources, and only 1 subscribed to an electronic resource. The most often reported evaluation methods for both populations were feedback from medical or dental students, feedback from medical or dental faculty, and online trials. Some AAMC (10%, n = 58) and ADA libraries (39%, n = 23) libraries reported that no evaluation of these materials occured at their libraries. From 2004-2007, publishers produced 45 USMLE preparation resources (total n = 546) to every 1 NBDE preparation resource (total n = 12). Users' needs, institutional missions and goals, financial status, and official collection policies most often underlie decisions to collect or not collect examination preparation materials. Evaluating the quality of examination preparation materials can be problematic due to lack of published reviews, lack of usability testing by libraries, and

Understanding dental CAD/CAM for restorations--accuracy from a mechanical engineering viewpoint.

Science.gov (United States)

Tapie, Laurent; Lebon, Nicolas; Mawussi, Bernardin; Fron-Chabouis, Hélène; Duret, Francois; Attal, Jean-Pierre

2015-01-01

As is the case in the field of medicine, as well as in most areas of daily life, digital technology is increasingly being introduced into dental practice. Computer-aided design/ computer-aided manufacturing (CAD/CAM) solutions are available not only for chairside practice but also for creating inlays, crowns, fixed partial dentures (FPDs), implant abutments, and other dental prostheses. CAD/CAM dental practice can be considered as the handling of devices and software processing for the almost automatic design and creation of dental restorations. However, dentists who want to use dental CAD/CAM systems often do not have enough information to understand the variations offered by such technology practice. Knowledge of the random and systematic errors in accuracy with CAD/CAM systems can help to achieve successful restorations with this technology, and help with the purchasing of a CAD/CAM system that meets the clinical needs of restoration. This article provides a mechanical engineering viewpoint of the accuracy of CAD/ CAM systems, to help dentists understand the impact of this technology on restoration accuracy.

Comparative Clinical Study of Conventional Dental Implants and Mini Dental Implants for Mandibular Overdentures: A Randomized Clinical Trial.

Science.gov (United States)

Aunmeungtong, Weerapan; Kumchai, Thongnard; Strietzel, Frank P; Reichart, Peter A; Khongkhunthian, Pathawee

2017-04-01

Dental implant-retained overdentures have been chosen as the treatment of choice for complete mandibular removable dentures. Dental implants, such as mini dental implants, and components for retaining overdentures, are commercially available. However, comparative clinical studies comparing mini dental implants and conventional dental implants using different attachment for implant-retained overdentures have not been well documented. To compare the clinical outcomes of using two mini dental implants with Equator ® attachments, four mini dental implants with Equator attachments, or two conventional dental implants with ball attachments, by means of a randomized clinical trial. Sixty patients received implant-retained mandibular overdentures in the interforaminal region. The patients were divided into three groups. In Groups 1 and 2, two and four mini dental implants, respectively, were placed and immediately loaded by overdentures, using Equator ® attachments. In Group 3, conventional implants were placed. After osseointegration, the implants were loaded by overdentures, using ball attachments. The study distribution was randomized and double-blinded. Outcome measures included changes in radiological peri-implant bone level from surgery to 12 months postinsertion, prosthodontic complications and patient satisfaction. The cumulative survival rate in the three clinical groups after one year was 100%. There was no significant difference (p < 0.05) in clinical results regarding the number (two or four) of mini dental implants with Equator attachments. However, there was a significant difference in marginal bone loss and patient satisfaction between those receiving mini dental implants with Equator attachments and conventional dental implants with ball attachments. The marginal bone resorption in Group 3 was significantly higher than in Groups 1 and 2 (p < 0.05); there were no significant differences between Groups 1 and 2. There was no significant difference in

What I wish I'd learned at dental school.

Science.gov (United States)

Oliver, G R; Lynch, C D; Chadwick, B L; Santini, A; Wilson, N H F

2016-08-26

Background Much concern appears to exist as to the scope and content of contemporary dental school programmes, with the oft-cited criticism being made that dental graduates are 'no longer as good as they used to be'.Aim The aim of this project was to survey the views of dentists - both new graduates and more established practitioners - on aspects of their own dental school training they felt had been deficient as well as commenting on what aspects of dental school education they would like to see improved/enhanced in current times.Methods An invitation to complete an Internet-based questionnaire was emailed to the Fellows and Members of the Faculty of General Dental Practice (UK). Topics in the questionnaire included the respondent's own dental education history, how well they felt their dental school training had covered certain clinical and non-clinical topics; and their opinions on areas they felt should be included in contemporary dental school programmes.Results Six hundred and forty-nine responses were received from 3,348 emailed invitations (response rate = 19.4%). Sixty-one percent (395) of respondents were qualified for 10 years or more. Among clinical skills and techniques, a majority of respondents reported they felt they had not had sufficient teaching/training in dental school in surgical endodontics (76%), conscious sedation (72%), root surface debridement (71%), fixed orthodontic appliances (68%), porcelain veneers (63%), implants (56%) and posterior composites (53%). If designing a new dental school programme, the most common topics respondents would seek to include/increase were business and practice management (21%), communication skills (including patient management and leadership skills) (10%), and increased clinical time and experience (8%).Conclusions The findings of this project are of interest and relevance to those working with student dentists and young dental practitioners. A greater emphasis is needed on the teaching of certain non

The relationship of dental caries and dental fear in Malaysian adolescents: a latent variable approach

Science.gov (United States)

2014-01-01

Background To investigate the role of geography (place of residence) as a moderator in the relationship between dental caries disease and treatment experience and dental fear in 16-year-olds living in Malaysia. Methods A multi-stage-stratified sampling method was employed. Five hundred and three, 16-year-olds from 6 government secondary schools participated in this study. The questionnaire examined participants’ demographic profile and assessed their dental fear using the Dental Fear Survey (DFS). The clinical examination consisted of the DMFT as the outcome measure of dental caries disease and treatment experience by a single examiner (ICC = 0.98). Structural equation modelling inspected the relationship between dental fear and dental caries disease and treatment experience. Results The mean DMFT was 2.76 (SD 3.25). The DT, MT and FT components were 0.64 (SD 1.25), 0.14 (SD 0.56) and 1.98 (SD 2.43) respectively. Rural compared with urban adolescents had significantly greater mean numbers of decayed and missing teeth. The mean DFS score was 40.8 (SD 12.4). Rural compared with urban adolescents had significantly higher mean scores for physical symptoms of dental fear. The correlation between dental fear (DFS) and dental caries disease and treatment experience (DMFT) was 0.29, p dental caries disease and treatment experience. The strength of the relationship between dental fear and dental caries disease and treatment experience varied in accordance with place of residence. Conclusion In conclusion a relationship between dental fear and dental caries disease and treatment experience was shown to exist in 16-year-old adolescents living in Malaysia. This study showed that the rural–urban dichotomy acted as a moderator upon this relationship. PMID:24621226

Immediately loaded implants supporting fixed prostheses in the edentulous maxilla: a preliminary clinical and radiologic report.

Science.gov (United States)

Bergkvist, Göran; Sahlholm, Sten; Karlsson, Ulf; Nilner, Krister; Lindh, Christina

2005-01-01

To evaluate the survival rate of immediately loaded ITI sand-blasted, large-grit, acid-etched (SLA) solid-screw dental implants in the edentulous maxilla after 8 months of loading. Twenty-eight patients (mean age 63 years) with edentulous maxillae each received 6 implants and 1 implant-supported fixed provisional prosthesis within 24 hours after surgery. After a mean healing time of 15 weeks, the patient received a definitive, screw-retained, implant-supported fixed prosthesis. A total of 168 implants were placed. Clinical parameters were registered after 1 month of loading with the implant-supported fixed prostheses as well as 8 months after implant placement. Radiologic examinations and assessments were made at implant placement and after 8 months. The mean marginal bone level at implant placement was 1.6 mm (range 0 to 5.1; SD 1.1) apical of the reference point (the implant shoulder). The mean marginal bone level at the 8-month follow-up was 3.2 mm (range 0.4 to 5.9; SD 1.1) apical of the reference point. Three implants failed during the healing period. The improved results in the present study might be a result of the positive effect of splinting the implants immediately after placement. ITI SLA solid-screw implants immediately loaded (ie, loaded within 24 hours of placement) and supporting fixed prostheses had successful survival rates after 8 months. The present results constitute a solid baseline for future follow-up studies.

Dental care coverage and income-related inequalities in foregone dental care in Europe during the great recession.

Science.gov (United States)

Elstad, Jon Ivar

2017-08-01

This study examines income inequalities in foregone dental care in 23 European countries during the years with global economic crisis. Associations between dental care coverage from public health budgets or social insurance, and income-related inequalities in perceived access to dental care, are analysed. Survey data 2008-2013 from 23 countries were combined with country data on macro-economic conditions and coverage for dental care. Foregone dental care was defined as self-reported abstentions from needed dental care because of costs or other crisis-related reasons. Age-standardized percentages reporting foregone dental care were estimated for respondents, age 20-74, in the lowest and highest income quartile. Associations between dental care coverage and income inequalities in foregone dental care, adjusted for macro-economic indicators, were examined by country-level regression models. In all 23 countries, respondents in the lowest income quartile reported significantly higher levels of foregone dental care than respondents in the highest quartile. During 2008-2013, income inequalities in foregone dental care widened significantly in 13 of 23 countries, but decreased in only three countries. Adjusted for countries' macro-economic situation and severity of the economic crisis, higher dental care coverage was significantly associated with smaller income inequalities in foregone dental care and less widening of these inequalities. Income-related inequalities in dental care have widened in Europe during the years with global economic crisis. Higher dental care coverage corresponded to less income-related inequalities in foregone dental care and less widening of these inequalities. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Measuring the Impact of Cultural Competence Training for Dental Hygiene Students.

Science.gov (United States)

Daugherty, Heather N; Kearney, Rachel C

2017-10-01

Purpose: The purpose of this study was to measure the change in levels of knowledge of providing culturally competent care and self-assessed cultural competence of senior level dental hygiene students after the implementation of an online cultural competence training module. Methods: Twenty-eight members of the senior class of 31 dental hygiene students (N=28) volunteered to participate in this IRB approved study at the Ohio State University School of Dentistry. The students took the online Inventory for Assessing the Process of Cultural Competence- Student Version (IAPCC-SV), to assess their self-perceived cultural competence. Upon completion of the pre-test, students then completed the United States Department of Health and Human Services (HHS) Office of Minority Health (OMH) Cultural Competency Program for Oral Health Professionals; a three-module online training program designed to measure increased knowledge of cultural competence. Three weeks following the initial pre-test and upon completion of the Cultural Competency Program for Oral Health Professionals online learning modules, students re-took the IAPCC-SV. Results: Twenty-eight senior dental hygiene students completed the IAPCC-SV pre-test, the OMH e-learning modules and the IAPCC-SV post-test. The average score on the pre-test was 55.14±7.54 and the average score on the post-test was 61.33±7.86. There was a significant difference in pre-test and post-test scores (pdental hygiene students' levels of knowledge of cultural competence. Copyright © 2017 The American Dental Hygienists’ Association.

Dental Calculus Arrest of Dental Caries

OpenAIRE

Keyes, Paul H.; Rams, Thomas E.

2016-01-01

Background An inverse relationship between dental calculus mineralization and dental caries demineralization on teeth has been noted in some studies. Dental calculus may even form superficial layers over existing dental caries and arrest their progression, but this phenomenon has been only rarely documented and infrequently considered in the field of Cariology. To further assess the occurrence of dental calculus arrest of dental caries, this study evaluated a large number of extracted human t...

Histological transformations of the dental pulp as possible indicator of post mortem interval: a pilot study.

Science.gov (United States)

Carrasco, Patricio A; Brizuela, Claudia I; Rodriguez, Ismael A; Muñoz, Samuel; Godoy, Marianela E; Inostroza, Carolina

2017-10-01

The correct estimation of the post mortem interval (PMI) can be crucial on the success of a forensic investigation. Diverse methods have been used to estimate PMI, considering physical changes that occur after death, such as mortis algor, livor mortis, among others. Degradation after death of dental pulp is a complex process that has not yet been studied thoroughly. It has been described that pulp RNA degradation could be an indicator of PMI, however this study is limited to 6 days. The tooth is the hardest organ of the human body, and within is confined dental pulp. The pulp morphology is defined as a lax conjunctive tissue with great sensory innervation, abundant microcirculation and great presence of groups of cell types. The aim of this study is to describe the potential use of pulp post mortem alterations to estimate PMI, using a new methodology that will allow obtainment of pulp tissue to be used for histomorphological analysis. The current study will identify potential histological indicators in dental pulp tissue to estimate PMI in time intervals of 24h, 1 month, 3 months and 6 months. This study used 26 teeth from individuals with known PMI of 24h, 1 month, 3 months or 6 months. All samples were manipulated with the new methodology (Carrasco, P. and Inostroza C. inventors; Universidad de los Andes, assignee. Forensic identification, post mortem interval estimation and cause of death determination by recovery of dental tissue. United State patent US 61/826,558 23.05.2013) to extract pulp tissue without the destruction of the tooth. The dental pulp tissues obtained were fixed in formalin for the subsequent generation of histological sections, stained with Hematoxylin Eosin and Masson's Trichrome. All sections were observed under an optical microscope using magnifications of 10× and 40×. The microscopic analysis of the samples showed a progressive transformation of the cellular components and fibers of dental pulp along PMI. These results allowed creating a

Taxonomy for competency-based dental curricula.

Science.gov (United States)

Beltrán-Neira, Roberto J; Beltrán-Aguilar, Eugenio D

2004-09-01

The objective of this article is to propose a classification of dental competencies. Interest in dental competencies has grown consistently during the last three decades. However, the dental education literature suggests that the term "competency" is understood and used differently by dental schools around the world. The taxonomic classification of dental competencies we propose follows a systematic approach starting at the highest level of complexity, i.e., the professional profile the teaching institution envisions for its graduates, and following in a decreasing degree of complexity to competency function, task, step, movement, and moment. This taxonomy has proved to be useful for more than thirty years in the Dental School of the Peruvian University Cayetano Heredia. Graduates of this school are successful practitioners, teachers, and researchers in Peru and other countries. The classification proposed here should clarify terms, facilitate curriculum design and learning assessment, stimulate further discussion on the matter, and facilitate communication among the dental education establishment.

Tribology of dental materials: a review

International Nuclear Information System (INIS)

Zhou, Z R; Zheng, J

2008-01-01

The application of tribology in dentistry is a growing and rapidly expanding field. Intensive research has been conducted to develop an understanding of dental tribology for successful design and selection of artificial dental materials. In this paper, the anatomy and function of human teeth is presented in brief, three types of current artificial dental materials are summarized, and their advantages and disadvantages, as well as typical clinical applications, are compared based on the literature. Possible tribological damage of tooth structure, which is induced by complex interfacial motion, and friction-wear test methods are reported. According to results obtained by the authors and from the literature, the main progress in the area of dental tribology on both natural teeth and artificial dental materials is reviewed. Problems and challenges are discussed and future research directions for dental tribology are recommended. (topical review)

Tribology of dental materials: a review

Energy Technology Data Exchange (ETDEWEB)

Zhou, Z R; Zheng, J [Tribology Research Institute, Key Laboratory for Advanced Technology of Materials of Ministry of Education, Southwest Jiaotong University, Chengdu 610031 (China)], E-mail: zrzhou@home.swjtu.edu.cn

2008-06-07

The application of tribology in dentistry is a growing and rapidly expanding field. Intensive research has been conducted to develop an understanding of dental tribology for successful design and selection of artificial dental materials. In this paper, the anatomy and function of human teeth is presented in brief, three types of current artificial dental materials are summarized, and their advantages and disadvantages, as well as typical clinical applications, are compared based on the literature. Possible tribological damage of tooth structure, which is induced by complex interfacial motion, and friction-wear test methods are reported. According to results obtained by the authors and from the literature, the main progress in the area of dental tribology on both natural teeth and artificial dental materials is reviewed. Problems and challenges are discussed and future research directions for dental tribology are recommended. (topical review)

A fixed-point theorem for holomorphic maps

OpenAIRE

TIMONEY, RICHARD

1994-01-01

PUBLISHED We consider the action on the maximal ideal space M of the algebra H of bounded analytic functions, induced by an analytic self?map of a complex manifold, X. After some general preliminaries, we focus on the question of the existence of fixed points for this action, in the case when X is the open unit disk, D. We classify the fixed?point?free M?obius transformations, and we show that for an arbitrary analytic map from D into itself, the induced map has a fixed poin...

The impact of integrated team care taught using a live NHS contract on the educational experience of final year dental students.

Science.gov (United States)

Radford, D R; Holmes, S; Woolford, M J; Dunne, S M

2014-11-01

To investigate the responses of the dental student body in the first three years of outreach education (2010-13) at the University of Portsmouth Dental Academy in the areas of integrated team work and use of a current NHS contact. Use of a questionnaire to allow both quantitative and qualitative data to be obtained, administered to the three cohorts of students at the end of their longitudinal attendance at the Academy in their final year of education at King's College London Dental Institute. Data were obtained from 227 students which represented a 95% return rate. Sixty-four percent of students strongly agreed with both statements: 'I am confident with working with a dental nurse' and 'I now understand properly the scope of practice of dental hygiene-therapists'. Sixty-seven percent strongly agreed with the statement 'I have had useful experience of working in NHS primary care during the final year'. Eighty percent either strongly agreed or agreed with the statement 'My experience of real Units of Dental Activity and Key Performance Indicators has encouraged me to positively consider NHS high street dentistry as a career option'. Within the limitations of this study the dental students reported having gained useful experience of working in integrated team care dentistry. They expressed strong support for the education that is being delivered in an outreach environment and, most importantly, the student body was looking forward to entering general dental practice in the UK.

[The choice of color in fixed prosthetics: what steps should be followed for a reliable outcome?].

Science.gov (United States)

Vanheusden, Alain; Mainjot, Amélie

2004-01-01

The creation of a perfectly-matched esthetic fixed restoration is undeniably one of the most difficult challenges in modern dentistry. The final outcome depends on several essential steps: the use of an appropriate light source, the accurate analysis and correct evaluation of patient's teeth parameters (morphology, colour, surface texture,...), the clear and precise transmission of this data to the laboratory and the sound interpretation of it by a dental technician who masters esthetic prosthetic techniques perfectly. The purpose of this paper was to give a reproducible clinical method to the practitioner in order to achieve a reliable dental colorimetric analysis.

Selective interference with pacemaker activity by electrical dental devices.

Science.gov (United States)

Miller, C S; Leonelli, F M; Latham, E

1998-01-01

We sought to determine whether electromagnetic interference with cardiac pacemakers occurs during the operation of contemporary electrical dental equipment. Fourteen electrical dental devices were tested in vitro for their ability to interfere with the function of two Medtronics cardiac pacemakers (one a dual-chamber, bipolar Thera 7942 pacemaker, the other a single-chamber, unipolar Minix 8340 pacemaker). Atrial and ventricular pacemaker output and electrocardiographic activity were monitored by means of telemetry with the use of a Medtronics 9760/90 programmer. Atrial and ventricular pacing were inhibited by electromagnetic interference produced by the electrosurgical unit up to a distance of 10 cm, by the ultrasonic bath cleaner up to 30 cm, and by the magnetorestrictive ultrasonic scalers up to 37.5 cm. In contrast, operation of the amalgamator, electric pulp tester, composite curing light, dental handpieces, electric toothbrush, microwave oven, dental chair and light, ENAC ultrasonic instrument, radiography unit, and sonic scaler did not alter pacing rate or rhythm. These results suggest that certain electrosurgical and ultrasonic instruments may produce deleterious effects in medically fragile patients with cardiac pacemakers.

Molar incisor hypomineralisation (MIH): correlation with dental caries and dental fear.

Science.gov (United States)

Kosma, I; Kevrekidou, A; Boka, V; Arapostathis, K; Kotsanos, N

2016-04-01

This cross-sectional study was to investigate correlations between molar incisor hypomineralisation (MIH), dental caries and child dental fear. The subjects in the study were representative samples of 8 and 14 year old children from three Greek cities (total N = 2335). Dental examinations were performed by one calibrated examiner in classrooms, after the children had brushed their teeth, using an intraoral mirror and artificial room light supplemented by a penlight. All the children completed the children's fear survey schedule-dental subscale (CFSS-DS) questionnaire. MIH scores were recorded using EAPD criteria and dental caries experience by DMFS/dmfs index. Data were analysed with the Chi-squared (χ (2)), Mann-Whitney and Spearman's rank correlation coefficient tests. The mean DMFS in children with MIH (8-year olds: 1.60 ± 2.01, 14-year olds: 4.60 ± 4.41) was statistically significantly higher than children without MIH (8-year olds: 1.01 ± 1.78, 14-year olds: 3.46 ± 4.28) (p MIH had statistically significantly higher mean DMFS scores than children with mild or no MIH (p MIH status (p = 0.332). Caries experience was associated with the MIH status of the first permanent molars in both age groups (p MIH (26.5 ± 9.6) (p = 0.339), regardless of MIH severity. A positive association between MIH and dental caries was confirmed and a lack of association found between MIH and dental fear in Greek children.

Advocacy for the Provision of Dental Hygiene Services Within the Hospital Setting: Development of a Dental Hygiene Student Rotation.

Science.gov (United States)

Juhl, Jacqueline A; Stedman, Lynn

2016-06-01

Educational preparation of dental hygiene students for hospital-based practice, and advocacy efforts promote inclusion of dental hygienists within hospital-based interdisciplinary health care teams. Although the value of attending to the oral care needs of patients in critical care units has been recognized, the potential impact of optimal oral health care for the general hospital population is now gaining attention. This article describes a hospital-based educational experience for dental hygiene students and provides advocacy strategies for inclusion of dental hygienists within the hospital interdisciplinary team. The dental hygienist authors, both educators committed to evidence-based oral health care and the profession of dental hygiene, studied hospital health care and recognized a critical void in oral health care provision within that setting. They collaboratively developed and implemented a hospital-based rotation within the curriculum of a dental hygiene educational program and used advocacy skills to encourage hospital administrators to include a dental hygiene presence within hospital-based care teams. Hospital-based dental hygiene practice, as part of interprofessional health care delivery, has the potential to improve patient well-being, shorten hospital stays, and provide fiscal savings for patients, institutions, and third party payers. Advocacy efforts can promote dental hygienists as members of hospital-based health care teams. Further research is needed to document: (1) patient outcomes resulting from optimal oral care provision in hospitals; (2) best ways to prepare dental hygienists for career opportunities within hospitals and other similar health care settings; and (3) most effective advocacy strategies to promote inclusion of dental hygienists within care teams. Copyright © 2016 Elsevier Inc. All rights reserved.