WorldWideScience

Sample records for thiophene tetrahydrofuran mtbe

  1. Measurements of activity coefficients at infinite dilution of aliphatic and aromatic hydrocarbons, alcohols, thiophene, tetrahydrofuran, MTBE, and water in ionic liquid [BMIM][SCN] using GLC

    International Nuclear Information System (INIS)

    Domanska, Urszula; Laskowska, Marta

    2009-01-01

    The activity coefficients at infinite dilution, γ 13 ∞ for 32 solutes: alkanes, alken-1-es, alkyn-1-es, cycloalkanes, aromatic hydrocarbons, alcohols, thiophene, tetrahydrofuran, tert-butyl methyl ether, and water in the ionic liquid 1-butyl-3-methylimidazolium thiocyanate [BMIM][SCN] were determined by gas-liquid chromatography at the temperatures from 298.15 K to 368.15 K. The values of the partial molar excess enthalpies at infinite dilution ΔH 1 E,∞ were calculated from the experimental γ 13 ∞ values obtained over the temperature range. The selectivities for the hexane/benzene, cyclohexane/benzene, hexane/thiophene, and other separation problems were calculated from the γ 13 ∞ and compared to the other ionic liquids, N-methyl-2-pyrrolidinone, and sulfolane, taken from the recent literature. This work demonstrates that with chosen ionic liquid it is possible to separate different organic compounds with the highest selectivity, ever published

  2. MTBE experts' discussion: Environmental pollution from MTBE fuel additives. Proceedings; MTBE-Fachgespraech: Umweltbelastungen durch die Nutzung von MTBE (Methyl-tertiaer-butylether) als Kraftstoffzusatz. Tagungsband

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    MTBE is a volatile, water-soluble, oxygen-containing liquid with a high octane rating. It hardly absorbs to the soil matrix, is hardly degradable by biological means, and moves in groundwater at practically the same speed as the groundwater itself. This makes it an important groundwater hazard. The main problem is the low taste and smell threshold concentration of MTBE, because of which contaminated water is unfit for drinking. MTBE has been used as a fuel additive in the USA since the seventies and in Germany since the eighties for a better antiknock rating. MTBE concentrations depend on the fuel quality, ranging from 0.3 percent in normal gasoline and 1.6 percent in super gasoline to 6-12 percent by volume in SuperPlus and Optimax fuels. At this conference, which comprised nine lectures and a round of detailed discussions, measured concentrations of MTBE in air, precipitations, surface water and groundwater were presented, and the possibilities of modelling were discussed. The attendants of the meeting agreed that in view of the available data and at the present state of knowledge concerning the sources and fate of MTBE in environmental media, MTBE cannot be excluded as a groundwater pollutant. (orig.) [German] MTBE ist eine leichtfluechtige, gut wasserloesliche, sauerstoffhaltige Fluessigkeit mit hoher Oktanzahl. Es sorbiert fast nicht an die Bodenmatrix, ist sehr schlecht biologisch abbaubar und bewegt sich im Grundwasser praktisch mit der gleichen Geschwindigkeit wie das Grundwasser selbst. Aufgrund dieser Eigenschaften stellt MTBE eine Gefahr fuer das Grundwasser dar. Problematisch aus Sicht der Wasserversorgung ist die niedrige Geruchs- und Geschmacksschwelle von MTBE, weshalb kontaminiertes Wasser nicht mehr als Trinkwasser brauchbar ist. MTBE wird seit Mitte der 70er Jahre in den USA und seit Anfang der 80er Jahre in Deutschland dem Benzin zugesetzt, um die Klopffestigkeit zu verbessern. Der MTBE-Gehalt haengt von der Benzin-Qualitaet ab: Waehrend

  3. Limitations in MTBE biodegradation; Etapes limitantes dans la biodegradation du MTBE

    Energy Technology Data Exchange (ETDEWEB)

    Fayolle, F.; Francois, A.; Garnier, L.; Godefroy, D.; Mathis, H.; Piveteau, P.; Monot, F. [Institut Francais du Petrole (IFP), Dept. Biotechnologie et Chimie de la Biomasse, 92 - Rueil-Malmaison (France)

    2003-08-01

    The methyl tert-butyl ether (MTBE) metabolic pathway was partially elucidated in Mycobacterium austroafricanum IFP 2012 by identifying the degradation intermediates. Several enzymatic activities were specifically induced during growth on MTBE. Among those required for the first steps of MTBE degradation to tert-butyl alcohol (TBA), the same monooxygenase was responsible for the oxidation of both MTBE and TBA, with a low affinity for TBA (Km = 1.1 mM). An esterase was involved in the hydrolysis of tert-butyl formate (TBF). The slowness of the degradation of MTBE by M. austroafricanum IFP 2012 was the result of complex interactions, especially the negative effect of TBF formed during MTBE oxidation on the MTBE/TBA mono-oxygenase and the absence of TBA oxidation in the presence of residual MTBE. Moreover, concerning the downstream steps of MTBE metabolism, Co{sup ++} ions were required for the degradation of 2-hydroxy-isobutyric acid (HIBA) formed by oxidation of TBA as shown by the low growth yield on HIBA in the absence of cobalt. (authors)

  4. Cross-linked poly(tetrahydrofuran) as promising sorbent for organic solvent/oil spill

    Energy Technology Data Exchange (ETDEWEB)

    Yati, Ilker; Ozan Aydin, Gulsah; Bulbul Sonmez, Hayal, E-mail: hayalsonmez@gtu.edu.tr

    2016-05-15

    Highlights: • Poly(tetrahydrofuran) based sorbents were prepared. • PTHF sorbents demonstrate reusability at least for ten times. • PTHF based sorbents show fast and quick absorption-desorption process. • 19 g of oil can be absorbed by 1 g of PTHF based sorbent. - Abstract: In this study, a series of different molecular weights of poly(tetrahydrofuran) (PTHF), which is one of the most important commercial polymers around the world, was condensed with tris[3-(trimethoxysilyl)propyl]isocyanurate (ICS) to generate a cross-linked 3-dimensional network in order to obtain organic solvent/oil sorbents having high swelling capacity. The prepared sorbents show high and fast swelling capacity in oils such as dichloromethane (DCM), tetrahydrofuran (THF), acetone, t-butyl methyl ether (MTBE), gasoline, euro diesel, and crude oil. The recovery of the absorbed oils from contaminated surfaces, especially from water, and the regeneration of the sorbents after several applications are effective. The characterization and thermal properties of the sorbents are identified by Fourier transform infrared spectroscopy (FTIR), solid-state {sup 13}C and {sup 29}Si cross-polarization magic angle spinning (CPMAS) nuclear magnetic resonance (NMR), differential scanning calorimetry (DSC) and thermal gravimetric analyses (TGA), respectively. The new usage area of PTHF is emerged by the preparation of PTHF-based network structure with high oil absorption capacity and having excellent reusability as an oil absorbent for the removal of organic liquids from the spill site.

  5. Degradation of MTBE and TBA by a new isolate from MTBE-contaminated soil.

    Science.gov (United States)

    Zhang, Rui-Ling; Huang, Guo-Qiang; Lian, Jing-Yan; Li, Xin-Gang

    2007-01-01

    Methyl tert-butyl ether (MTBE), a gasoline additive, possesses serious problems to the environmental health. In the present study, a bacterial culture named A-3 which could effectively degrade MTBE was isolated from the MTBE contaminated soil. The isolate was identified as Chryseobacterium sp., a new species capable of degrading MTBE. In order to enhance its degradation ability, selected environment factors were investigated. The results showed that the optimal temperature was in the range of 25-30 degrees C, the pH was 7.0, the inoculum size was 2 x 10(8) CFU/ml and the optimal concentration of MTBE was from 50 to 100 mg/L. The maximum MTBE utilization rate (upsilon(max)) was 102 nmol MTBE/(mg cell protein x h). Furthermore, it was found that the isolate could also degrade tert-butyl alcohol (TBA). The degradation rates of TBA were much faster than those of MTBE. The additional TBA would lead to the decrease of the initial MTBE degradation rate and the inhibitory effect of TBA increased with the increase of TBA concentration. Similar protein profiles at least seven peptides were demonstrated after SDS-PAGE analysis of crude extracts obtained from the cells growing in MTBE and TBA culture.

  6. Phytoremediation of MTBE

    International Nuclear Information System (INIS)

    Newman, L.

    2002-01-01

    'Full text:' Phytoremediation, or the use of plants to remediate contaminants, is one of the new technologies being considered for MTBE remediation. While the high solubility of MTBE results in rapid uptake in the plant, little is known about the metabolic fate of MTBE in the plant system. In part, this is because of the lack of analytical methods that will allow the identification and characterization of low levels of metabolites when examined against a plant cell background. This talk will present a review of the work from several laboratories that are looking into phytoremediation of MTBE as well as the work done at the University of Washington and the University of South Carolina looking at the fate of MTBE in the plant system. Results from several experiments, both in the laboratory and from field installations, will be presented. (author)

  7. Role of volatilization in changing TBA and MTBE concentrations at MTBE-contaminated sites.

    Science.gov (United States)

    Eweis, Juana B; Labolle, Eric M; Benson, David A; Fogg, Graham E

    2007-10-01

    Tertiary butyl alcohol (TBA) is commonly found as an impurity in methyl tertiary butyl ether (MTBE) added to gasoline. Frequent observations of high TBA, and especially rising TBA/MTBE concentration ratios, in groundwater at gasoline spill sites are generally attributed to microbial conversion of MTBE to TBA. Typically overlooked is the role of volatilization in the attenuation of these chemicals especially in the vadose zone, which is a source of contamination to groundwater. Here we show that volatilization, particularly through remediation by vapor extraction, can substantially affect the trends in TBA and MTBE concentrations and the respective mass available to impact groundwater aquifers, through the preferential removal of more volatile compounds, including MTBE, and the apparent enrichment of less volatile compounds like TBA. We demonstrate this phenomenon through numerical simulations of remedial-enhanced volatilization. Results show increases in TBA/MTBE concentration ratios consistent with ratios observed in groundwater at gasoline spill sites. Volatilization is an important, and potentially dominant, process that can result in concentration trends similar to those typically attributed to biodegradation.

  8. A review of treatment technologies for MTBE

    International Nuclear Information System (INIS)

    Bass, D.

    1995-01-01

    Available treatment technologies for methyl tertiary butyl ether (MTBE) contamination in soil, groundwater, and recovered groundwater are reviewed and assessed. MTBE contamination is becoming an important issue due to the increasing prevalence and regulation of this gasoline additive. In addition, MTBE is more soluble and more mobile in groundwater than most hydrocarbons, so it is usually the first gasoline constituent to reach sensitive receptors. Treatment of MTBE is complicated by its Henry's constant, which is lower than most other gasoline constituents. Furthermore, evidence of biodegradability of MTBE is mixed, and MTBE does not degrade rapidly abiotically. Groundwater pumping is usually employed to contain and collect MTBE-contaminated groundwater, often successfully because of its high aqueous solubility. Air sparging/soil vapor extraction is also successfully employed to treat MTBE, but its effectiveness is reduced by the low Henry's constant of MTBE. Sparging and other aerobic bioremediation approaches are hampered by the poor biodegradability of MTBE. Oxidation technologies, such as ozone injection, hold promise for rapid in situ remediation of MTBE. Treatment of recovered groundwater contaminated with MTBE is also problematic. MTBE adsorbs poorly to granular activated carbon; advanced oxidation processes are effective on MTBE, but entail high capital and operating costs; bioreactors are of questionable effectiveness on MTBE. Air stripping is usually the most cost-effective treatment technology for MTBE so long as the off gas from the air stripper can be discharged without treatment. However, off gas treatment is expensive, so groundwater is sometimes heated to reduce the requirement for stripping air

  9. Measurements of mass-fraction activity coefficient at infinite dilution of aliphatic and aromatic hydrocarbons, thiophene, alcohols, water, ethers, and ketones in hyperbranched polymer, Boltorn H2004, using inverse gas chromatography

    International Nuclear Information System (INIS)

    Domanska, Urszula; Zolek-Tryznowska, Zuzanna

    2010-01-01

    Thermodynamic properties of the hyperbranched polymer, Boltorn H2004 (B-H2004), were investigated by inverse gas chromatography with 42 different solvents: n-alkanes (C 5 -C 10 ), cycloalkanes (C 5 -C 8 ), alkenes (C 5 -C 8 ), alkynes (C 5 -C 8 ), aromatic hydrocarbons (benzene, toluene, ethylbenzene, o-, m-, p-xylene, thiophene), alcohols (C 1 -C 5 ), water, ethers (tetrahydrofuran (THF), methyl-tert-butylether (MTBE), diethyl-, di-n-propyl-, di-n-butyl ether), and ketones (acetone, 2-pentanone, 3-pentanone, 2-hexanone, 3-hexanone, cyclopentanone) at the temperatures from (308.15 to 348.15) K using the inverse gas chromatography (IGC). The density and thermophysical properties of polymer were described. The specific retention volume (V g ), the mass-fraction activity coefficient at infinite dilution (Ω 13 ∞ ), the Flory-Huggins interaction parameter (χ 13 ∞ ), the molar enthalpy of sorption in the polymer (Δ s H), the partial molar excess enthalpy at infinite dilution (ΔH 1 E,∞ ), the molar enthalpy of vaporization to the ideal-gas state for the pure solutes (Δ vap H 0 ), the partial molar Gibbs excess energy at infinite dilution (ΔG 1 E,∞ ), and the solubility parameter of the polymer (δ 3 ), were calculated. The UNIFAC-FV model was used to predict the mass-fraction activity coefficient at infinite dilution for different solutes in the B-H2004 polymer.

  10. MTBE: effects on soil and groundwater resources

    National Research Council Canada - National Science Library

    Jacobs, James J; Guertin, Jacques; Herron, Christy

    2001-01-01

    ... Properties of MTBE); Dr. Jacques Guertin, Toxicologist/ Chemist (Toxicity, Health Effects, and Taste and Odor Thresholds of MTBE; Appendix I, Toxicity of MTBE: Human Health Risk Calculations); Fred Stanin, Hydrogeologist (Transport and Fate of MTBE in the Environment); Dr. Paul Fahrenthold, Remediation Engineer/Chemist (Detection and Treatment of M...

  11. THE PARADOXES OF MTBE

    Science.gov (United States)

    A widely used gasoline additive, methyl tertiary butyl ether (MTBE), has been controversial, in part because of concerns about potential inhalation health effects and more recently because of added concerns about water contamination. Although many of the issues related to MTBE ha...

  12. BIODEGRADATION OF MTBE BY A MICROORGANISM CONSORTIUM

    Directory of Open Access Journals (Sweden)

    M. Alimohammadi, A. R. Mesdaghinia, M. Mahmoodi, S. Nasseri, A. H. Mahvi and J. Nouri

    2005-10-01

    Full Text Available Methyl Tert-Butyl Ether (MTBE is one of the ether oxygenates which its use has been increased within the last twenty years. This compound is produced from isobutylene and methanol reaction that is used as octane index enhancer and also increases dissolved oxygen in gasoline and decreases carbon monoxide emission in four phased motors because of better combustion of gasoline. High solubility in water (52 g/L, high vapor pressure (0.54 kg/cm3, low absorption to organic carbon of soil and presence of MTBE in the list of potentially-carcinogens of U.S EPA has made its use of great concern. The culture media used in this study was Mineral Salt Medium (MSM. The study lasted for 236 days and in three different concentrations of MTBE of 200, 5 and 0.8 mg/L. A control sample was also used to compare the results. This research studied the isolation methods of microbial consortium in the MTBE polluted soils in Tehran and Abadan petroleum refinery besides MTBE degradation. The results showed the capability of bacteria in consuming MTBE as carbon source. Final microbial isolation was performed with several microbial passages as well as keeping consortium in a certain amount of MTBE as the carbon source.

  13. Bioremediation treatment of MTBE and ETBE in contaminated soils

    Directory of Open Access Journals (Sweden)

    Alissara Reungsang

    2006-07-01

    Full Text Available Three Methyl Tertiary Butyl Ether (MTBE degradative consortia were isolated from gasoline-contaminated soil namely: mKMS, mKGS1 and mKGS2. These consortia were tested for the ability to degrade Ethyl Tertiary Butyl Ether (ETBE at the concentration of 100 mg/L and to degrade a mixture of MTBE and ETBE in the Nutrient Broth (NB media at the concentration of 50 mg/L each. The results showed that mKGS1 was the best degraders in which 74% of MTBE, 25% of ETBE and 16% of MTBE and 23% of ETBE in the mixture were degraded, within 30 days. mKGS1 was then further used in the bioaugmentation and biostimulation experiments. Degradation of MTBE increased from 34% to 61% after 70 days when mKGS1 was amended in soil mixed with the combination of MTBE and ETBE (at 50 mg/L each. However, mKGS1 did not significantly help the ETBE degradation when it was amended in soil (biostimulation technique. One percent glucose significantly stimulated the degradation of MTBE by the indigenous microorganisms. The presence of mKGS1 and an addition of 1% glucose as extra carbon source improved the degradation of MTBE, from 42 to 51%, suggesting mKGS1 played an important role in the degradation of MTBE.

  14. Bioremediation Potential of MTBE in Water Resources by Eucalyptus Globolus

    Directory of Open Access Journals (Sweden)

    Mohammad Koushafar

    2005-12-01

    Full Text Available Methyl Tertia Butyl Ether (MTBE is an organic compound with widespread use in unleaded gasoline. Although use of MTBE had some environmental advantages, it was soon cleared that this compound has adverse effect on environment and human health. MTBE is highly soluble in water, it binds weakly to soil and doesn’t readily biodegrade in the environments. However it is known as a contaminant in environment specially for groundwater resources. Different methods have been introduced for treatment of MTBE from groundwater. These methods are generally expensive and inefficient. Phytoremediation introduce as an effective and inexpensive technology for removal of MTBE from groundwater and soil. In this paper the ability of  Eucaliptus globules for removal of MTBE from water has been investigated.The Transpiration Stream Concentration Factor (TSCF was used for evaluation of the ability of this plant. The calculated value for TSCF was 0.79 so it can be concluded that MTBE can be absorbed by this plant.

  15. MICROCOSM STUDY OF ANAEROBIC BIODEGRADATION OF MTBE AND TBA

    Science.gov (United States)

    Ground water samples collected in at a gasoline spill sites in Orange County, California, suggested that MTBE was being transformed to TBA. In some of the most heavily contaminated wells, the concentration of TBA was higher than the concentration of MTBE (MTBE 2 µg/L and TBA 40,...

  16. Catabolism of methyl ter-butyl ether (MTBE): characterization of the enzymes of Mycobacterium austroafricanum IFP 2012 involved in MTBE degradation; Catabolisme du methyl tert-butyl ether (MTBE): caracterisation des enzymes impliquees dans la degradation du MTBE chez Mycobacterium austroafricanum IFP 2012

    Energy Technology Data Exchange (ETDEWEB)

    Lopes Ferreira, N

    2005-11-15

    Methyl tert-butyl ether (MTBE) is added to gasoline to meet the octane index requirement. its solubility in water and its poor biodegradability made the use of MTBE a great environmental concern, particularly regarding aquifers. We previously isolated M austroafricanum IFP 2012 able to use MTBE as a sole source of carbon and energy and the MTBE pathway was partially characterized. In the present study, which aimed at isolating the genes involved in MTBE biodegradation in order to use them for estimation of MTBE biodegradation capacities in contaminated environment, we isolated a new M. austroafricanum strain, IFP 2015. A new degradation intermediate, the 2-methyl 1,2-propane-diol (2-M1,2-PD), the product of tert-butanol (TBA) oxidation, was identified. We also determined the enzymes induced during growth of M. austroafricanum IFP 2012 on MTBF. Then, using the tools of protein analysis and of molecular biology, we isolated and cloned the mpd genes cluster in the plasmid pCL4D. Heterologous expression of the recombinant plasmid in M smegmatis tmc2 155, showed the involvement of an 2-M1,2-PD dehydrogenase (MpdB) and a hydroxy-iso-butyr-aldehyde dehydrogenase (MpdC), encoded by mpdB and mpdC, respectively. Both enzymes were responsible for the conversion of 2-M 1,2-PD to hydroxy-isobutyric acid (HIBA). A further survey of different M austroafricanum strains, including IFP 2012, IFP 2015 and JOBS (ex-M vaccae) showed the link between the ability to grow on C{sub 2} to C{sub 16} n-alkanes and the MTBE and TBA degradation capacities. The alkB gene was partially sequenced in all these strains. Expression of alkB was demonstrated in M. austroafricanum IFP 2012 after growth on propane, hexane, hexadecane and TBA. Finally, we identified 2-propanol as the intermediate of HIBA degradation. The gene encoding the 2-propanol:p-N,N'-dimethyl-4-nitroso-aniline (NDMA) oxidoreductase was detected M austroafricanum IFP 2012. (author)

  17. Catabolism of methyl ter-butyl ether (MTBE): characterization of the enzymes of Mycobacterium austroafricanum IFP 2012 involved in MTBE degradation; Catabolisme du methyl tert-butyl ether (MTBE): caracterisation des enzymes impliquees dans la degradation du MTBE chez Mycobacterium austroafricanum IFP 2012

    Energy Technology Data Exchange (ETDEWEB)

    Lopes Ferreira, N.

    2005-11-15

    Methyl tert-butyl ether (MTBE) is added to gasoline to meet the octane index requirement. its solubility in water and its poor biodegradability made the use of MTBE a great environmental concern, particularly regarding aquifers. We previously isolated M austroafricanum IFP 2012 able to use MTBE as a sole source of carbon and energy and the MTBE pathway was partially characterized. In the present study, which aimed at isolating the genes involved in MTBE biodegradation in order to use them for estimation of MTBE biodegradation capacities in contaminated environment, we isolated a new M. austroafricanum strain, IFP 2015. A new degradation intermediate, the 2-methyl 1,2-propane-diol (2-M1,2-PD), the product of tert-butanol (TBA) oxidation, was identified. We also determined the enzymes induced during growth of M. austroafricanum IFP 2012 on MTBF. Then, using the tools of protein analysis and of molecular biology, we isolated and cloned the mpd genes cluster in the plasmid pCL4D. Heterologous expression of the recombinant plasmid in M smegmatis tmc2 155, showed the involvement of an 2-M1,2-PD dehydrogenase (MpdB) and a hydroxy-iso-butyr-aldehyde dehydrogenase (MpdC), encoded by mpdB and mpdC, respectively. Both enzymes were responsible for the conversion of 2-M 1,2-PD to hydroxy-isobutyric acid (HIBA). A further survey of different M austroafricanum strains, including IFP 2012, IFP 2015 and JOBS (ex-M vaccae) showed the link between the ability to grow on C{sub 2} to C{sub 16} n-alkanes and the MTBE and TBA degradation capacities. The alkB gene was partially sequenced in all these strains. Expression of alkB was demonstrated in M. austroafricanum IFP 2012 after growth on propane, hexane, hexadecane and TBA. Finally, we identified 2-propanol as the intermediate of HIBA degradation. The gene encoding the 2-propanol:p-N,N'-dimethyl-4-nitroso-aniline (NDMA) oxidoreductase was detected M austroafricanum IFP 2012. (author)

  18. Benzene and MTBE Sorption in Fine Grain Sediments

    Science.gov (United States)

    Leal-Bautista, R. M.; Lenczewski, M. E.

    2003-12-01

    The practice of adding methyl tert-butyl ether (MTBE) to gasoline started in the late 1970s and increased dramatically in the 1990s. MTBE first was added as a substitute for tetra-ethyl lead then later as a fuel oxygenate. Although the use of MTBE has resulted in significant reduction in air pollution, it has become a significant groundwater contaminant due to its high solubility in water, high environmental mobility, and low potential for biodegradation. A recent report (1999-2001) by the Metropolitan Water District of Southern California in collaboration with United State Geological Survey and the Oregon Health and Science University found that MTBE was the second most frequent detected volatile organic compound in groundwater. In Illinois, MTBE has been found in 26 of the 1,800 public water supplies. MTBE has also been blended in Mexico into two types of gasoline sold in the country by the state oil company (PEMEX) but is not monitored in groundwater at this time. Early research on MTBE considered it unable to adsorb to soils and sediments, however, by increasing the organic matter and decreasing the size of the grains (silts or clays) this may increase sorption. The objective of this study is to determine if fine grained materials have the potential for sorption of MTBE due to its high specific surface area (10-700 m 2/g) and potentially high organic matter (0.5-3.8%). The experiment consisted of sorption isotherms to glacial tills from DeKalb, Illinois and lacustrine clays from Chalco, Mexico. Experiments were performed with various concentrations of MTBE and benzene (10, 50, 100, 500 and 1000 ug/L) at 10° C and 25° C. Results showed a range of values for the distribution coefficient (Kd, linear model). At 10° C the Kd value for MTBE was 0.187 mL/g for lacustrine clay while the glacial loess had a value of 0.009 mL/g. The highest Kd values with MTBE were 0.2859 mL/g for organic rich lacustrine clays and 0.014 mL/g for glacial loess at 25° C. The highest

  19. Intrinsic bioremediation of MTBE-contaminated groundwater at a petroleum-hydrocarbon spill site

    Science.gov (United States)

    Chen, K. F.; Kao, C. M.; Chen, T. Y.; Weng, C. H.; Tsai, C. T.

    2006-06-01

    An oil-refining plant site located in southern Taiwan has been identified as a petroleum-hydrocarbon [mainly methyl tert-butyl ether (MTBE) and benzene, toluene, ethylbenzene, and xylenes (BTEX)] spill site. In this study, groundwater samples collected from the site were analyzed to assess the occurrence of intrinsic MTBE biodegradation. Microcosm experiments were conducted to evaluate the feasibility of biodegrading MTBE by indigenous microorganisms under aerobic, cometabolic, iron reducing, and methanogenic conditions. Results from the field investigation and microbial enumeration indicate that the intrinsic biodegradation of MTBE and BTEX is occurring and causing the decrease in MTBE and BTEX concentrations. Microcosm results show that the indigenous microorganisms were able to biodegrade MTBE under aerobic conditions using MTBE as the sole primary substrate. The detected biodegradation byproduct, tri-butyl alcohol (TBA), can also be biodegraded by the indigenous microorganisms. In addition, microcosms with site groundwater as the medium solution show higher MTBE biodegradation rate. This indicates that the site groundwater might contain some trace minerals or organics, which could enhance the MTBE biodegradation. Results show that the addition of BTEX at low levels could also enhance the MTBE removal. No MTBE removal was detected in iron reducing and methanogenic microcosms. This might be due to the effects of low dissolved oxygen (approximately 0.3 mg/L) within the plume. The low iron reducers and methanogens (soil) observed in the aquifer also indicate that the iron reduction and methanogenesis are not the dominant biodegradation patterns in the contaminant plume. Results from the microcosm study reveal that preliminary laboratory study is required to determine the appropriate substrates and oxidation-reduction conditions to enhance the biodegradation of MTBE. Results suggest that in situ or on-site aerobic bioremediation using indigenous microorganisms would

  20. Detections of MTBE in surficial and bedrock aquifers in New England

    International Nuclear Information System (INIS)

    Grady, S.J.

    1995-01-01

    The gasoline additive methyl tert-butyl ether (MTBE) was detected in 24% of water samples collected from surficial and bedrock aquifers in areas of New England. MTBE was the most frequently detected volatile organic compound among the 60 volatile chemicals analyzed and was present in 33 of 133 wells sampled from July 1993 through September 1995. The median MTBE concentration measured in ground-water samples was 0.45 microgram per liter and concentrations ranged from 0.2 to 5.8 microgram per liter. The network of wells sampled for MTBE consisted of 103 monitoring wells screened in surficial sand-and-gravel aquifers and 30 domestic-supply wells in fractured crystalline bedrock aquifers. Seventy-seven percent of all MTBE detections were from 26 shallow monitoring wells screened in surficial aquifers. MTBE was detected in42% of monitoring wells in urban areas. In agricultural areas, MTBE was detected i 8% (2 of 24) of wells and was not detected in undeveloped areas. Sixty-two percent of the MTBE detections in surficial aquifers were from wells within 0.25 mile of gasoline stations or underground gasoline storage tanks; all but one of these wells were in Connecticut and Massachusetts, where reformulated gasoline is used. MTBE was detected in 23% of deep domestic-supply wells that tapped fractured bedrock aquifers. MTBE was detected in bedrock wells only in Connecticut and Massachusetts; land use near the wells was suburban to rural, and none of the sampled bedrock wells were within 0.25 mile of a gasoline station

  1. Biodegradation of MTBE in reactors

    DEFF Research Database (Denmark)

    Waul, Christopher Kevin

    2007-01-01

    The fuel oxygenate methyl tert-butyl ether (MTBE) was first introduced in the 1970’s to improve gasoline combustion efficiency and reduce emission of harmful gases. However, it has caused groundwater contamination in Denmark and in many locations worldwide through accidental releases from leaking...... anaerobic conditions. Overall, the studies showed that despite the effects of competition, fixed film bioreactors can be successfully applied to remove MTBE from ground water to meet the current Danish drinking water regulatory requirement of 5 ppb or even lower....

  2. Ignition delay and soot oxidative reactivity of MTBE blended diesel fuel

    KAUST Repository

    Yang, Seung Yeon; Naser, Nimal; Chung, Suk-Ho; Al-Qurashi, Khalid

    2014-01-01

    Methyl tert-butyl ether (MTBE) was added to diesel fuel to investigate the effect on ignition delay and soot oxidative reactivity. An ignition quality tester (IQT) was used to study the ignition propensity of MTBE blended diesel fuels in a reactive spray environment. The IQT data showed that ignition delay increases linearly as the MTBE fraction increases in the fuel. A four-stroke single cylinder diesel engine was used to generate soot samples for a soot oxidation study. Soot samples were pre-treated using a tube furnace in a nitrogen environment to remove any soluble organic fractions and moisture content. Non-isothermal oxidation of soot samples was conducted using a thermogravimetric analyzer (TGA). It was observed that oxidation of 'MTBE soot' started began at a lower temperature and had higher reaction rate than 'diesel soot' across a range of temperatures. Several kinetic analyses including an isoconversional method and a combined model fitting method were carried out to evaluate kinetic parameters. The results showed that Diesel and MTBE soot samples had similar activation energy but the pre-exponential factor of MTBE soot was much higher than that of the Diesel soot. This may explain why MTBE soot was more reactive than Diesel soot. It is suggested that adding MTBE to diesel fuel is better for DPF regeneration since an MTBE blend can significantly influence the ignition characteristics and, consequently, the oxidative reactivity of soot. Copyright © 2014 SAE International.

  3. Ignition delay and soot oxidative reactivity of MTBE blended diesel fuel

    KAUST Repository

    Yang, Seung Yeon

    2014-04-01

    Methyl tert-butyl ether (MTBE) was added to diesel fuel to investigate the effect on ignition delay and soot oxidative reactivity. An ignition quality tester (IQT) was used to study the ignition propensity of MTBE blended diesel fuels in a reactive spray environment. The IQT data showed that ignition delay increases linearly as the MTBE fraction increases in the fuel. A four-stroke single cylinder diesel engine was used to generate soot samples for a soot oxidation study. Soot samples were pre-treated using a tube furnace in a nitrogen environment to remove any soluble organic fractions and moisture content. Non-isothermal oxidation of soot samples was conducted using a thermogravimetric analyzer (TGA). It was observed that oxidation of \\'MTBE soot\\' started began at a lower temperature and had higher reaction rate than \\'diesel soot\\' across a range of temperatures. Several kinetic analyses including an isoconversional method and a combined model fitting method were carried out to evaluate kinetic parameters. The results showed that Diesel and MTBE soot samples had similar activation energy but the pre-exponential factor of MTBE soot was much higher than that of the Diesel soot. This may explain why MTBE soot was more reactive than Diesel soot. It is suggested that adding MTBE to diesel fuel is better for DPF regeneration since an MTBE blend can significantly influence the ignition characteristics and, consequently, the oxidative reactivity of soot. Copyright © 2014 SAE International.

  4. Risk characterization of methyl tertiary butyl ether (MTBE) in tap water.

    Science.gov (United States)

    Stern, B R; Tardiff, R G

    1997-12-01

    Methyl tertiary butyl ether (MTBE) can enter surface water and groundwater through wet atmospheric deposition or as a result of fuel leaks and spills. About 30% of the U.S. population lives in areas where MTBE is in regular use. Ninety-five percent of this population is unlikely to be exposed to MTBE in tap water at concentrations exceeding 2 ppb, and most will be exposed to concentrations that are much lower and may be zero. About 5% of this population may be exposed to higher levels of MTBE in tap water, resulting from fuel tank leaks and spills into surface or groundwater used for potable water supplies. This paper describes the concentration ranges found and anticipated in surface and groundwater, and estimates the distribution of doses experienced by humans using water containing MTBE to drink, prepare food, and shower/bathe. The toxic properties (including potency) of MTBE when ingested, inhaled, and in contact with the skin are summarized. Using a range of human toxic potency values derived from animal studies, margins of exposure (MOE) associated with alternative chronic exposure scenarios are estimated to range from 1700 to 140,000. Maximum concentrations of MTBE in tap water anticipated not to cause adverse health effects are determined to range from 700 to 14,000 ppb. The results of this analysis demonstrate that no health risks are likely to be associated with chronic and subchronic human exposures to MTBE in tap water. Although some individuals may be exposed to very high concentrations of MTBE in tap water immediately following a localized spill, these exposures are likely to be brief in duration due to large-scale dilution and rapid volatilization of MTBE, the institution of emergency response and remediation measures to minimize human exposures, and the low taste and odor thresholds of MTBE which ensure that its presence in tap water is readily detected at concentrations well below the threshold for human injury.

  5. Measurement of critical temperatures and critical pressures for binary mixtures of methyl tert-butyl ether (MTBE) + alcohol and MTBE + alkane

    International Nuclear Information System (INIS)

    Han, Kewei; Xia, Shuqian; Ma, Peisheng; Yan, Fangyou; Liu, Tao

    2013-01-01

    Highlights: • The critical properties of seven binary mixtures related to gasoline were measured. • The critical properties of the five systems containing MTBE were reported for the first time. • Binary interaction parameters were fitted by experimental data using PR EOS with Wong–Sandler mixing rule. • Redlich–Kister equation was used to correlate the experimental data. -- Abstract: A set of high-pressure view apparatus was designed for determining the critical properties of chemicals. In order to check the reliability of the apparatus, the critical temperatures (T c ) and critical pressures (P c ) of pure n-heptane, cyclohexane, methanol, ethanol, 1-propanol, methyl tert-butyl ether (MTBE), and binary mixture n-hexane + ethanol were measured. The experimental data were in good agreement with the literature data, which proves the reliability of the apparatus used in the work. The critical temperatures and critical pressures of five binary mixtures containing gasoline additive (MTBE + n-heptane, MTBE + cyclohexane, MTBE + methanol, MTBE + ethanol, MTBE + 1-propanol) were measured using the high-pressure view cell with visual observation. The critical temperatures and critical pressures for the five binary mixtures were all reported for the first time. In addition, the critical temperatures and critical pressures of the binary mixture n-heptane + cyclohexane (two of main components in gasoline) were also measured. All the critical lines for the mixtures studied are continuous which connect the critical points of the two pure components, indicating their phase diagrams belong to type I proposed by Scott and van Konynenburg. The critical points of these systems were calculated by the Peng–Robinson equation of state with the Wong–Sandler mixing rule. This model could calculate the critical properties of the mixtures well with the binary interaction parameter k ij obtained by fitting the experimental critical data. And the experimental data were all

  6. AEROBIC BIODEGRADATION OF GASOLINE OXYGENATES MTBE AND TBA

    Science.gov (United States)

    MTBE degradation was investigated using a continuously stirred tank reactor (CSTR) with biomass retention (porous pot reactor) operated under aerobic conditions. MTBE was fed to the reactor at an influent concentration of 150 mg/l (1.70 mmol/l). A second identifical rector was op...

  7. Laboratory evidence of MTBE biodegradation in Borden aquifer material

    Science.gov (United States)

    Schirmer, Mario; Butler, Barbara J.; Church, Clinton D.; Barker, James F.; Nadarajah, Nalina

    2003-02-01

    Mainly due to intrinsic biodegradation, monitored natural attenuation can be an effective and inexpensive remediation strategy at petroleum release sites. However, gasoline additives such as methyl tert-butyl ether (MTBE) can jeopardize this strategy because these compounds often degrade, if at all, at a slower rate than the collectively benzene, toluene, ethylbenzene and the xylene (BTEX) compounds. Investigation of whether a compound degrades under certain conditions, and at what rate, is therefore important to the assessment of the intrinsic remediation potential of aquifers. A natural gradient experiment with dissolved MTBE-containing gasoline in the shallow, aerobic sand aquifer at Canadian Forces Base (CFB) Borden (Ontario, Canada) from 1988 to 1996 suggested that biodegradation was the main cause of attenuation for MTBE within the aquifer. This laboratory study demonstrates biologically catalyzed MTBE degradation in Borden aquifer-like environments, and so supports the idea that attenuation due to biodegradation may have occurred in the natural gradient experiment. In an experiment with batch microcosms of aquifer material, three of the microcosms ultimately degraded MTBE to below detection, although this required more than 189 days (or >300 days in one case). Failure to detect the daughter product tert-butyl alcohol (TBA) in the field and the batch experiments could be because TBA was more readily degradable than MTBE under Borden conditions.

  8. Economics of integrated MTBE/TAME/DIPE production

    International Nuclear Information System (INIS)

    Denney, R.G.

    1993-01-01

    Because of the 1990 Clean Air Act (CAA), the 1993 demand for oxygenates (i.e. MTBE, TAME, DIPE) for motor gasoline blending in PADD IV and V is estimated to total 166,000 bpd. Existing PADD IV and V oxygenate producers can only supply about 13% of this demand. The shortfall must be supplied from oxygenate producers in PADD III or from Canadian and offshore sources. This paper examines the economics of locating an integrated plant in Southwest Wyoming (PADD IV), to supply approximately 6,800 bpd of the PADD IV and V demand by producing MTBE, TAME, and DIPE from natural gas liquids (NGL). The Southwest Wyoming location offers the advantage of being closer to the PADD IV and V markets than the producers in PADD III and the availability of a relatively inexpensive NGL feedstock that has no other market than the Midwest or US Gulf Coast via MAPCO's NGL pipeline. With these location and feedstock cost advantages, the Southwest Wyoming integrated MTBE, TAME, DIPE plant offers an attractive return on investment and economics comparable to those of a World Scale, 12,500 bpd mixed butane feed MTBE plant in PADD III

  9. Electron scattering from tetrahydrofuran

    International Nuclear Information System (INIS)

    Fuss, M C; Sanz, A G; García, G; Muñoz, A; Oller, J C; Blanco, F; Do, T P T; Brunger, M J; Almeida, D; Limão-Vieira, P

    2012-01-01

    Electron scattering from Tetrahydrofuran (C 4 H 8 O) was investigated over a wide range of energies. Following a mixed experimental and theoretical approach, total scattering, elastic scattering and ionization cross sections as well as electron energy loss distributions were obtained.

  10. Thiophene-Based Organic Semiconductors.

    Science.gov (United States)

    Turkoglu, Gulsen; Cinar, M Emin; Ozturk, Turan

    2017-10-24

    Thiophene-based π-conjugated organic small molecules and polymers are the research subject of significant current interest owing to their potential use as organic semiconductors in material chemistry. Despite simple and similar molecular structures, the hitherto reported properties of thiophene-based organic semiconductors are rather diverse. Design of high performance organic semiconducting materials requires a thorough understanding of inter- and intra-molecular interactions, solid-state packing, and the influence of both factors on the charge carrier transport. In this chapter, thiophene-based organic semiconductors, which are classified in terms of their chemical structures and their structure-property relationships, are addressed for the potential applications as organic photovoltaics (OPVs), organic field-effect transistors (OFETs) and organic light emitting diodes (OLEDs).

  11. Comparison of an ability to degrade MTBE between mixed culture and monoculture isolated from gasoline contaminated soil

    Directory of Open Access Journals (Sweden)

    Wanpen Virojanakud

    2004-02-01

    Full Text Available Methyl tertiary butyl ether (MTBE is an oxygenated compound used to enhance the octane index of gasoline and replace lead in gasoline. MTBE can reduce air pollution but causes water pollution due to its high water solubility and low sorption to soil and thus can easily contaminate the environment. Biodegradation is one of the promising techniques to reduce MTBE contaminated in the environment and MTBE degrader was proposed as an efficient method used to degrade MTBE. In this study, MTBE degraders were isolated from gasoline contaminated soil and then were evaluated with the hypothesis that MTBE degraders could improve biodegradation of MTBE in soil and mixed culture could degrade MTBE more rapidly than monoculture. Gasoline contaminated soil samples were taken from retail gas stations and a motorcycle repair shop in Khon Kaen University. Isolation of MTBE degrader was conducted by using Basal Salt Medium (BSM containing 200 mg/L of MTBE as a carbon source. Mixed culture of MTBE degrader was successfully isolated under aerobic condition. Morphology study was conducted by streaking isolated mixed culture in solid medium, agar slant and identifying the cells shape under a microscope. It was found that this mixed culture was a gram negative bacteria with 7 different isolates. A comparison of the ability to degrade MTBE between mixed culture and monoculture was investigated in BSM containing 100 mg/L of MTBE. The results indicated that a mixed culture degraded MTBE more rapidly than monoculture i.e. 20% within 14 days. Monoculture, J4 and J7, were the most rapid MTBE degraders among the other monocultures in which they degraded 14% of MTBE in 14 days while monoculture J15 could degrade only 1% of MTBE.This preliminary result suggests that mixed cultures degrade MTBE more efficiently than monoculture.

  12. MTBE, the evolution of a commodity and its impact on US butanes

    International Nuclear Information System (INIS)

    Whitley, S.C.

    1994-01-01

    Since 1990, members of the gas processing and natural gas liquids communities have watched with eager anticipation the growth and development of methyl tertiary butyl ether. MTBE, as it is more commonly known, is a motor fuel oxygenate and octane enhancer. Not too long ago there were several butane-based MTBE plants in the engineering or construction phase and many more were on the drawing board. At one time the demand outlook for butanes that could potentially be consumed by existing and planned butane-based MTBE facilities exceeded 150,000 b/d. That outlook has been downgraded substantially over the past two years as technical and economic factors forced several companies to scrap their plans for worldscale butane-based MTBE plants. A look at the evolution of MTBE as a commodity may explain what has happened, and why demand for butanes by this market sector is no longer as promising as it was only two short years ago. This paper reviews first the impact that government regulations and legislation played in creating the need for MTBE. This will be followed by a discussion of how subsequent proposals and legislation have led to downward revisions in the US outlook for MTBE and butanes

  13. MTBE inhaled alone and in combination with gasoline vapor: uptake, distribution, metabolism, and excretion in rats.

    Science.gov (United States)

    Benson, J M; Barr, E B; Krone, J R

    2001-05-01

    The purpose of these studies was to extend previous evaluation of methyl tert-butyl ether (MTBE)* tissue distribution, metabolism, and excretion in rats to include concentrations more relevant to human exposure (4 and 40 ppm) and to determine the effects of coinhalation of the volatile fraction of unleaded gasoline on the tissue distribution, metabolism, and excretion of MTBE. Groups of male F344 rats were exposed nose-only for 4 hours to 4, 40, or 400 ppm 14C-MTBE or to 20 or 200 ppm of the light fraction of unleaded gasoline (LFG) containing 4 or 40 ppm 14C-MTBE, respectively. To evaluate the effects of repeated inhalation of LFG on MTBE tissue distribution, metabolism, and excretion, rats were exposed for 4 hours on each of 7 consecutive days to 20 or 200 ppm LFG with MTBE (4 or 40 ppm) followed on the eighth day by a similar exposure to LFG containing 14C-MTBE. Subgroups of rats were evaluated for respiratory parameters, initial body burdens, rates and routes of excretion, and tissue distribution and elimination. The concentrations of MTBE and its chief metabolite, tert-butyl alcohol (TBA), were measured in blood and kidney immediately after exposure, and the major urinary metabolites-2-hydroxyisobutyric acid (IBA) and 2-methyl-1,2-propanediol (2MePD)-were measured in urine. Inhalation of MTBE alone or as a component of LFG had no concentration-dependent effect on respiratory minute volume. The initial body burdens of MTBE equivalents achieved after 4 hours of exposure to MTBE did not increase linearly with exposure concentration. MTBE equivalents rapidly distributed to all tissues examined, with the largest percentages distributed to liver. The observed initial body burden did not increase linearly between 4 and 400 ppm. At 400 ppm, elimination half-times of MTBE equivalents from liver increased and from lung, kidney, and testes decreased compared with the two smaller doses. Furthermore, at 400 ppm the elimination half-time for volatile organic compounds (VOCs

  14. Biodegradation of thiophene by cometabolism in a biofilm system

    DEFF Research Database (Denmark)

    Rivas, Isabelle Marie; Arvin, Erik

    2000-01-01

    mineralised in the presence of thiophene. The micro-organisms are inactivated by thiophene, its metabolites or the metabolites of benzene. For low ratios of thiophene to benzene in the inlet of the reactor, the bacteria seem to adapt to thiophene and regain part of their activity that was lost when thiophene...... was introduced in the system. A hypothesis for this phenomena is that toxic metabolites of thiophene are converted biologically or abiotically into compounds, which are less harmful and inhibiting to the micro-organisms. Resting cells, which have been activated previously with benzene, are able to degrade...

  15. Anaerobic degradation of methyl tert-butyl ether (MTBE) and tert-butyl alcohol (TBA).

    Science.gov (United States)

    Finneran, K T; Lovley, D R

    2001-05-01

    The potential for anaerobic degradation of methyl tert-butyl ether (MTBE) and tert-butyl alcohol (TBA) was investigated in laboratory incubations of sediments from a petroleum-contaminated aquifer and in aquatic sediments. The addition of humic substances (HS) stimulated the anaerobic degradation of MTBE in aquifer sediments in which Fe(III) was available as an electron acceptor. This is attributed to the fact that HS and other extracellular quinones can stimulate the activity of Fe(III)-reducing microorganisms by acting as an electron shuttle between Fe(III)-reducing microorganisms and insoluble Fe(III) oxides. MTBE was not degraded in aquifer sediments without Fe(III) and HS. [14C]-MTBE added to aquatic sediments adapted for anaerobic MTBE degradation was converted to 14CO2 in the presence or absence of HS or the HS analog, anthraquione-2,6-disulfonate. Unamended aquatic sediments produced 14CH4 as well as 14CO2 from [14C]-MTBE. The aquatic sediments also rapidly consumed TBA under anaerobic conditions and converted [14C]-TBA to 14CH4 and 14CO2. An adaptation period of ca. 250-300 days was required prior to the most rapid anaerobic MTBE degradation in both sediment types, whereas TBA was metabolized in the aquatic sediments without a lag. These results demonstrate that, under the appropriate conditions, MTBE and TBA can be degraded in the absence of oxygen. This suggests that it may be possible to design strategies for the anaerobic remediation of MTBE in petroleum-contaminated subsurface environments.

  16. The role of mesopores in MTBE removal with granular activated carbon.

    Science.gov (United States)

    Redding, Adam M; Cannon, Fred S

    2014-06-01

    This activated carbon research appraised how pore size and empty-bed contact time influenced the removal of methyl tert-butyl ether (MTBE) at part-per-billion (ppb) concentrations when MTBE was the sole organic impurity. The study compared six granular activated carbons (GACs) from three parent sources; these GACs contained a range of pore volume distributions and had uniform slurry pHs of 9.7-10.4 (i.e. the carbons' bulk surface chemistries were basic). Several of these activated carbons had been specifically tailored for enhanced sorption of trace organic compounds. In these tests, MTBE was spiked into deionized-distilled water (∼pH 7); MTBE loading was measured by isotherms and by rapid small-scale column tests (RSSCTs) that simulated full-scale empty-bed contact times of 7, 14, and 28 min. The results showed that both ultra-fine micropores and small-diameter mesopores were important for MTBE adsorption. Specifically, full MTBE loading during RSSCTs bore a strong correlation (R(2) = 0.94) to the product (mL/g × mL/g) of pore volume ≤4.06 Å wide and pore volume between ∼22 Å and ∼59 Å wide. This correlation was greater than for the product of any other pore volume combinations. Also, this product exhibited a stronger correlation than for just one or the other of these two pore ranges. This multiplicative relationship implied that both of these pore sizes were important for the optimum GAC performance of these six carbons (i.e. favorable mass transfer coupled with favorable sorption). The authors also compared MTBE mass loading during RSSCTs (μg MTBE/g GAC) to isotherm capacity (μg MTBE/g GAC). This RSSCT loading "efficiency" ranged from 28% to 96% for the six GACs; this efficiency correlated most strongly to pores that were 14-200 Å wide (R(2) = 0.94). This correlation indicated that only those carbons with a sufficient volume of 14-200 Å pores could adsorb MTBE to the extent that would be predicted from isotherm data. Copyright

  17. Overview of technologies for removal of methyl tert-butyl ether (MTBE) from water.

    Science.gov (United States)

    Levchuk, Irina; Bhatnagar, Amit; Sillanpää, Mika

    2014-04-01

    Wide use of methyl tert-butyl ether (MTBE) as fuel oxygenates leads to worldwide environment contamination with this compound basically due to fuel leaks from storage or pipelines. Presence of MTBE in drinking water is of high environmental and social concern. Existing methods for MTBE removal from water have a number of limitations which can be possibly overcome in the future with use of emerging technologies. This work aims to provide an updated overview of recent developments in technologies for MTBE removal from water. Copyright © 2014. Published by Elsevier B.V.

  18. Bio-MTBE. A new option to fulfil biofuel quota for gasoline; Bio-MTBE. Eine neue Option zur Erfuellung der Biokraftstoffquote in Ottokraftstoffen

    Energy Technology Data Exchange (ETDEWEB)

    Busch, Oliver M.; Schade, Arnd; Locher, Annette [Evonik Industries AG, Essen (Germany)

    2013-05-15

    To meet the legally required bio-fuel quota in gasoline, an alternative to the ethanol blend E10 is nowavailable for nearly one year. Evonik Industries has introduced a bio-version of methyl tert-butyl ether (MTBE), an anti-knock agent, on the market. Chemically, both products are identical, because in production methanol is exchanged for bio-methanol. Bio-methanol is produced from raw glycerine, which arises as a byproduct from biodiesel production. This makes bio-MTBE an ideal bio-fuel component as defined by the EU's Renewable Energy Directive: Fuel components made from waste and residues are ''double counted'' regarding their bio-energy content. The product is widely used in the German and Dutch markets. In both countries, bio- MTBE is legally recognized as a bio-fuel component fulfilling double counting requirements. In the meantime, also other European countries have been introducing double counting for second-generation biofuel components. The EU Commission proposed to allow components based on residual materials to be calculated fourfold in the future. Should this be the case, bio-MTBE would become significantly more valuable. (orig.)

  19. Enhancement of the Biodegradability of Methyl tert- Butyl Ether (MTBE by Advanced Oxidation

    Directory of Open Access Journals (Sweden)

    Mehraban Sadeghi

    2006-06-01

    Full Text Available The effectiveness of ozone treatment for improving the biodegradability of recalcitrant pollutants has been proved by investigating the ozonation reaction of Methyl tert-Butyl Ether (MTBE as a bioresistant gasoline oxygenate. Laboratory scale experiments have been carried out at room temperature by bubbling for 120 minutes ozonated air (3.4 ppm/min into 3 liter of an alkaline (pH=11.5 aqueous solution (100 mg/L of MTBE. The experimental results indicated that during the ozonation, complete MTBE degradation occurs in 100 minutes and after this time, ozone consumption goes on very slowly. At the end of the ozonation, after 100 minutes, the initial value of COD (256 mg O2/L is 98 and corresponds to a relative removal of about 62%. As for MTBE solution biodegradability expressed as (BOD5 / (COD ratio, during the first 90 minutes, its value regularly increases from lowest 0.01 up to a maximum of 0.68 that corresponds to an ozone consumption of 1.25 mg per each mg of COD initially present in the solution. The research showed that partial degradation of MTBE in the advanced oxidation processes results an increase in its biological degradation. But more oxidation results lower  (BOD5 / (COD ratio. Also the research showed that for idealization of the chemical oxidation conditions of MTBE, it needs to decrease COD to 46-68% before the biological degradation. The experimental results for determining the rate of MTBE removal due to stripping showed that about 14% of MTBE strips out after an hour of sparging with oxygen gas. The fraction of MTBE oxidized and/or striped increases to about 28% (in pH=7 and 70% (in pH=11.5 with ozonation over the same time period.

  20. Degradation of a recalcitrant xenobiotic compound: methyl tert-butyl ether (MTBE) metabolism by mycobacterium austroafricanum; Degradation d'un compose xenobiotique recalcitrant: metabolisme du methyl tert-butyl ether (MTBE) par mycobacterium austroafricanum IFP 2012

    Energy Technology Data Exchange (ETDEWEB)

    Francois, A

    2002-11-01

    Methyl tert-butyl ether (MTBE) is introduced up to 15% (vol/vol) in gasoline in order to obtain a good octane number and to prevent carbon monoxide emissions. However, as a consequence of storage tanks leakage, MTBE became one of the major pollutants of aquifers because of its very low biodegradability. The present study aimed at investigating the biodegradation of MTBE by Mycobacterium austroafricanum IFP 2012. The MTBE metabolic pathway was partially elucidated owing to the identification of some intermediates (tert-butyl formate (TBF), tert-butyl alcohol (TBA), a-hydroxy-isobutyric acid and acetone) and some enzymatic activities (MTBE/TBA monooxygenase (non hemic and inducible), TBF esterase, 2-propanol: NDMA oxidoreductase and another monooxygenase involved in acetone degradation). The involvement of TBF and the requirement of cobalt could be explanations for the low natural attenuation of MTBE; whereas the methoxy group does not seem to be implicated. (author)

  1. Persulfate Oxidation of MTBE- and Chloroform-Spent Granular Activated Carbon

    Science.gov (United States)

    Activated persulfate (Na2S2O8) regeneration of methyl tert-butyl ether (MTBE) and chloroform-spent GAC was evaluated in this study. Thermal-activation of persulfate was effective and resulted in greater MTBE removal than either alkaline-activation or H2O2–persulfate binary mixtur...

  2. Remediation challenges posed by the fate and transport properties of MTBE

    International Nuclear Information System (INIS)

    Day, M.J.

    2002-01-01

    Releases of fuel from underground tank systems have been a major source of groundwater contamination for several decades. The fate and transport characteristics of fuel components significantly influence the potential risk to groundwater supplies and the methodologies to manage and remediate contamination at fuel release sites. The recognition that MTBE can be more mobile in groundwater systems than other components of oxygenated fuels has put an increased emphasis on early detection and response to fuel leaks and spills. Remediation of oxygenated fuel releases usually follows a sequence of tasks: receptor protection, source control, residual and dissolved phase remediation, and monitored natural attenuation. Good characterization of hydrogeological and geochemical conditions is required because understanding the fate and transport of fuel components is critical to developing an appropriate management plan and an efficient remediation program. Understanding the specific site conditions allows appropriate selection and sequencing of remedial technologies. The physical and chemical characteristics of MTBE can result in a higher mobility in the subsurface, compared with the BTEX components of a gasoline release. These same characteristics make MTBE more readily extractable from the subsurface compared with BTEX. There is an impression that remediating gasoline releases containing MTBE requires costly, specialized technologies compared with those employed to deal with non-oxygenated fuel releases. However, the characteristics of MTBE are well suited to traditional, physical remedial approaches that have proven to be effective with the other components of gasoline. Technologies such as groundwater extraction, soil vapor extraction (SVE), and thermal desorption work exceptionally well with MTBE due to its low adsorptive and high vapor pressure characteristics. Similarly, recent studies have demonstrated that MTBE is biodegradable under a wide variety of conditions

  3. Challenges of MTBE development from field butanes

    International Nuclear Information System (INIS)

    Williams, F.

    1991-01-01

    Tenneco Natural Gas Liquids has embarked on a new project to produce Methyl Teritiary Butyl Ether (MTBE) form butanes as have several others. The Clean Air Act will provide the impetus for even more of these plants in the future. In fact, butanes have the potential to go form a surplus product situation today to an important product in the near future. So what follows are our ideas about what the MTBE business looks like form the standpoint of a new producer getting things underway. This paper reports that there are roughly six areas where a potential producer of MTBE or Ethyl Tertiary Butyl Ether (ETBE) for that matter, should have concern. Your planning department should be aware of a source of feedstocks; have adequate storage planned; understand the technology involved and its related cost; be forearmed with an idea of location and its specific market opportunities; be prepared for significant environmental evaluation along with necessary contingency plans; and most importantly display a high degree of optimism as to future markets so as to minimize all of the aforementioned concerns

  4. Retrofit of an MTBE-unit to ETBE

    Energy Technology Data Exchange (ETDEWEB)

    Rix, A.; Peters, U. [Degussa GmbH, Marl (Germany)

    2007-07-01

    New European policies on renewable fuels have created substantial market pressure to increase the share of bio-fuels. For blending in gasoline, ETBE formed by etherification of isobutene with bio-ethanol is an interesting alternative to direct blending of bio-ethanol. Since the physical properties of methanol and ethanol - and consequently MTBE and ETBE - are quite similar, MTBE-plants can be retrofitted for ETBE-production. Experience from a retrofit-project at Marl is presented. In an integrated C4-plant, isobutene removal is one the most important tasks of the etherification unit to purify the raffinate 2 stream for butene-1 production. Compared to MTBE, reaction rate and equilibrium constant are lower and suitable means of maintaining isobutene conversion on former levels must be found. Furthermore, the extraction of excess alcohol and its recovery by distillation is more difficult. The ethanol-water azeotrope formed on top of the alcohol recovery column has to undergo a further drying process. Alternatives for ethanol drying have been evaluated and performance data for a membrane process is presented. (orig.)

  5. Adduction of DNA with MTBE and TBA in mice studied by accelerator mass spectrometry.

    Science.gov (United States)

    Yuan, Y; Wang, H F; Sun, H F; Du, H F; Xu, L H; Liu, Y F; Ding, X F; Fu, D P; Liu, K X

    2007-12-01

    Methyl tert-butyl ether (MTBE) is a currently worldwide used octane enhancer substituting for lead alkyls and gasoline oxygenate. Our previous study using doubly (14)C-labeled MTBE [(CH(3))(3) (14)CO(14)CH(3)] has shown that MTBE binds DNA to form DNA adducts at low dose levels in mice. To elucidate the mechanism of the binding reaction, in this study, the DNA adducts with singly (14)C-labeled MTBE, which was synthesized from (14)C-methanol and tert-butyl alcohol (TBA), or (14)C-labeled TBA in mice have been measured by ultra sensitive accelerator mass spectrometry. The results show that the methyl group of MTBE and tert-butyl alcohol definitely form adducts with DNA in mouse liver, lung, and kidney. The methyl group of MTBE is the predominant binding part in liver, while the methyl group and the tert-butyl group give comparable contributions to the adduct formation in lung and kidney.

  6. Effects of MTBE blended diesel fuel on diesel combustion and emissions; MTBE kongo keiyu ga diesel nensho haiki ni oyobosu eikyo

    Energy Technology Data Exchange (ETDEWEB)

    Shundo, S; Yokota, H; Kakegawa, T [Hino Motors, Ltd., Tokyo (Japan)

    1997-10-01

    The effects of MTBE (Methyl-t-butyl ether) blended diesel fuel on diesel combustion and emissions were studied. In conventional diesel combustion, the testing mode was carried out in conformity with the Japanese 13 mode. Furthermore, this fuel was applied to a new combustion system (Homogeneous Charge Intelligent Multiple Injection). MTBE blended diesel fuel is more effective in the case of new combustion system and very low NOx, PM capability is suggested. 6 refs., 6 figs., 2 tabs.

  7. Degradation of a recalcitrant xenobiotic compound: methyl tert-butyl ether (MTBE) metabolism by mycobacterium austroafricanum; Degradation d'un compose xenobiotique recalcitrant: metabolisme du methyl tert-butyl ether (MTBE) par mycobacterium austroafricanum IFP 2012

    Energy Technology Data Exchange (ETDEWEB)

    Francois, A.

    2002-11-01

    Methyl tert-butyl ether (MTBE) is introduced up to 15% (vol/vol) in gasoline in order to obtain a good octane number and to prevent carbon monoxide emissions. However, as a consequence of storage tanks leakage, MTBE became one of the major pollutants of aquifers because of its very low biodegradability. The present study aimed at investigating the biodegradation of MTBE by Mycobacterium austroafricanum IFP 2012. The MTBE metabolic pathway was partially elucidated owing to the identification of some intermediates (tert-butyl formate (TBF), tert-butyl alcohol (TBA), a-hydroxy-isobutyric acid and acetone) and some enzymatic activities (MTBE/TBA monooxygenase (non hemic and inducible), TBF esterase, 2-propanol: NDMA oxidoreductase and another monooxygenase involved in acetone degradation). The involvement of TBF and the requirement of cobalt could be explanations for the low natural attenuation of MTBE; whereas the methoxy group does not seem to be implicated. (author)

  8. Used motor oil as a source of MTBE, TAME, and BTEX to ground water

    Science.gov (United States)

    Baker, R.J.; Best, E.W.; Baehr, A.L.

    2002-01-01

    Methyl tert-butyl ether (MTBE), the widely used gasoline oxygenate, has been identified as a common ground water contaminant, and BTEX compounds (benzene, toluene, ethylbenzene, and xylenes) have long been associated with gasoline spills. Because not all instances of ground water contamination by MTBE and BTEX can be attributed to spills or leaking storage tanks, other potential sources need to be considered. In this study, used motor oil was investigated as a potential source of these contaminants. MTBE in oil was measured directly by methanol extraction and gas chromatography using a flame ionization detector (GC/FID). Water was equilibrated with oil samples and analyzed for MTBE, BTEX, and the oxygenate tert-amyl methyl ether (TAME) by purge-and-trap concentration followed by GC/FID analysis. Raoult's law was used to calculate oil-phase concentrations of MTBE, BTEX, and TAME from aqueous-phase concentrations. MTBE, TAME, and BTEX were not detected in any of five new motor oil samples, whereas these compounds were found at significant concentrations in all six samples of the used motor oil tested for MTBE and all four samples tested for TAME and BTEX. MTBE concentrations in used motor oil were on the order of 100 mg/L. TAME concentrations ranged from 2.2 to 87 mg/L. Concentrations of benzene were 29 to 66 mg/L, but those of other BTEX compounds were higher, typically 500 to 2000 mg/L.

  9. Comparative effects of MTBE and ethanol additions into gasoline on exhaust emissions

    Science.gov (United States)

    Song, Chong-Lin; Zhang, Wen-Mei; Pei, Yi-Qiang; Fan, Guo-Liang; Xu, Guan-Peng

    The effects of the additives of ethanol (EA) and methyl tert-butyl ether (MTBE) in various blend ratios into the gasoline fuel on the exhaust emissions and the catalytic conversion efficiencies were investigated in an EFI gasoline engine. The regulated exhaust emissions (CO, THC and NO X) and the unregulated exhaust emissions (benzene, formaldehyde, acetaldehyde, unburned EA and MTBE) before and after the three-way catalytic converter were measured. The experimental results showed that EA brought about generally lower regulated engine-out emissions than MTBE did. But, the comparison of the unregulated engine-out emissions between both additives was different. Concretely, the effect of EA on benzene emission was worse than that of MTBE on the whole, which was a contrast with formaldehyde emission. The difference in the acetaldehyde comparison depended much on the engine operating conditions, especially the engine speed. Both EA and MTBE were identified in the engine exhaust gases only when they were added to the fuel, and their volume fraction increased with blend ratios. The catalytic conversion efficiencies of the regulated emissions for the EA blends were in general lower than those for MTBE blends, especially at the low and high engine speeds. There was little difference in the catalytic conversion efficiencies for both benzene and formaldehyde, while distinct difference for acetaldehyde.

  10. Assessment of MTBE biodegradation in contaminated groundwater using 13C and 14C analysis: Field and laboratory microcosm studies

    International Nuclear Information System (INIS)

    Thornton, Steven F.; Bottrell, Simon H.; Spence, Keith H.; Pickup, Roger; Spence, Michael J.; Shah, Nadeem; Mallinson, Helen E.H.; Richnow, Hans H.

    2011-01-01

    Highlights: → Carbon isotope fractionation for MTBE varies with dissolved oxygen concentration. → Carbon isotope fractionation can underestimate MTBE biodegradation at plume fringes. → Fractionation factors must be for specific biodegradation mechanisms and conditions. → Specific microbial populations influence carbon isotope fractionation in groundwater. - Abstract: Radiolabelled assays and compound-specific stable isotope analysis (CSIA) were used to assess methyl tert-butyl ether (MTBE) biodegradation in an unleaded fuel plume in a UK chalk aquifer, both in the field and in laboratory microcosm experiments. The 14 C-MTBE radiorespirometry studies demonstrated widespread potential for aerobic and anaerobic MTBE biodegradation in the aquifer. However, δ 13 C compositions of MTBE in groundwater samples from the plume showed no significant 13 C enrichment that would indicate MTBE biodegradation at the field scale. Carbon isotope enrichment during MTBE biodegradation was assessed in the microcosms when dissolved O 2 was not limiting, compared with low in situ concentrations (2 mg/L) in the aquifer, and in the absence of O 2 . The microcosm experiments showed ubiquitous potential for aerobic MTBE biodegradation in the aquifer within hundreds of days. Aerobic MTBE biodegradation in the microcosms produced an enrichment of 7 per mille in the MTBE δ 13 C composition and an isotope enrichment factor (ε) of -1.53 per mille when dissolved O 2 was not limiting. However, for the low dissolved O 2 concentration of up to 2 mg/L that characterizes most of the MTBE plume fringe, aerobic MTBE biodegradation produced an enrichment of 0.5-0.7 per mille, corresponding to an ε value of -0.22 per mille to -0.24 per mille. No anaerobic MTBE biodegradation occurred under these experimental conditions. These results suggest the existence of a complex MTBE-biodegrading community in the aquifer, which may consist of different aerobic species competing for MTBE and dissolved O 2

  11. Elucidating MTBE degradation in a mixed consortium using a multidisciplinary approach.

    Science.gov (United States)

    Bastida, Felipe; Rosell, Mònica; Franchini, Alessandro G; Seifert, Jana; Finsterbusch, Stefanie; Jehmlich, Nico; Jechalke, Sven; von Bergen, Martin; Richnow, Hans H

    2010-08-01

    The structure and function of a microbial community capable of biodegrading methyl-tert-butyl ether (MTBE) was characterized using compound-specific stable isotope analysis (CSIA), clone libraries and stable isotope probing of proteins (Protein-SIP). The enrichment culture (US3-M), which originated from a gasoline-impacted site in the United States, has been enriched on MTBE as the sole carbon source. The slope of isotopic enrichment factors (epsilon(C) of -2.29+/-0.03 per thousand; epsilon(H) of -58+/-6 per thousand) for carbon and hydrogen discrimination (Deltadelta(2)H/Deltadelta(13)C) was on average equal to Lambda=24+/-2, a value closely related to the reaction mechanism of MTBE degradation in Methylibium petroleiphilum PM1. 16S rRNA gene libraries revealed sequences belonging to M. petroleiphilum PM1, Hydrogenophaga sp., Thiothrix unzii, Rhodobacter sp., Nocardiodes sp. and different Sphingomonadaceae bacteria. Protein-SIP analysis of the culture grown on (13)C-MTBE as the only carbon source revealed that proteins related to members of the Comamonadaceae family, such as Delftia acidovorans, Acidovorax sp. or Comamonas sp., were not (13)C-enriched, whereas proteins related to M. petroleiphilum PM1 showed an average incorporation of 94.5 atom%(13)C. These results indicate a key role for this species in the degradation of MTBE within the US3-M consortia. The combination of CSIA, molecular biology and Protein-SIP facilitated the analysis of an MTBE-degrading mixed culture from a functional and phylogenetic point of view.

  12. BTEX AND MTBE BIOREMEDIATION: BIONETS™ CONTAINING SOS, PM1 AND ISOLITE®

    Science.gov (United States)

    MTBE and BTEX (benzene, toluene, ethylbenzene, and xylenes) are major problems of many sites in the United States. The objective of this study was to determine if biologically active in situ BioNets could bioremediate MTBE and BTEX contaminated groundwater. Seven BioNets w...

  13. Using DNA-Stable Isotope Probing to Identify MTBE- and TBA-Degrading Microorganisms in Contaminated Groundwater.

    Science.gov (United States)

    Key, Katherine C; Sublette, Kerry L; Duncan, Kathleen; Mackay, Douglas M; Scow, Kate M; Ogles, Dora

    2013-01-01

    Although the anaerobic biodegradation of methyl tert -butyl ether (MTBE) and tert -butyl alcohol (TBA) has been documented in the laboratory and the field, knowledge of the microorganisms and mechanisms involved is still lacking. In this study, DNA-stable isotope probing (SIP) was used to identify microorganisms involved in anaerobic fuel oxygenate biodegradation in a sulfate-reducing MTBE and TBA plume. Microorganisms were collected in the field using Bio-Sep® beads amended with 13 C 5 -MTBE, 13 C 1 -MTBE (only methoxy carbon labeled), or 13 C 4 -TBA. 13 C-DNA and 12 C-DNA extracted from the Bio-Sep beads were cloned and 16S rRNA gene sequences were used to identify the indigenous microorganisms involved in degrading the methoxy group of MTBE and the tert -butyl group of MTBE and TBA. Results indicated that microorganisms were actively degrading 13 C-labeled MTBE and TBA in situ and the 13 C was incorporated into their DNA. Several sequences related to known MTBE- and TBA-degraders in the Burkholderiales and the Sphingomonadales orders were detected in all three 13 C clone libraries and were likely to be primary degraders at the site. Sequences related to sulfate-reducing bacteria and iron-reducers, such as Geobacter and Geothrix , were only detected in the clone libraries where MTBE and TBA were fully labeled with 13 C, suggesting that they were involved in processing carbon from the tert -butyl group. Sequences similar to the Pseudomonas genus predominated in the clone library where only the methoxy carbon of MTBE was labeled with 13 C. It is likely that members of this genus were secondary degraders cross-feeding on 13 C-labeled metabolites such as acetate.

  14. CONTROLLED, SHORT-TERM DERMAL AND INHALATION EXPOSURE TO MTBE AND DIBROMOCHLOROMETHANE

    Science.gov (United States)

    The oxygenate methyl tert-butyl ether (MTBE) has been added to gasoline to meet national ambient air quality standards in those parts of the US that are non-compliant for carbon monoxide. Although MTBE has provided important health benefits in terms of reduced hazardous air po...

  15. Iron Amendment and Fenton Oxidation of MTBE-Spent Granular Activated Carbon

    Science.gov (United States)

    Fenton-driven regeneration of Methyl tert-butyl ether (MTBE)-spent granular activated carbon (GAC) involves Fe amendment to the GAC to catalyze H2O2 reactions and to enhance the rate of MTBE oxidation and GAC regeneration. Four forms of iron (ferric sulfate, ferric chloride, fer...

  16. USE OF MEMBRANE BIOREACTOR FOR BIODEGRADATION OF MTBE IN CONTAMINATED WATER1

    Science.gov (United States)

    An ultrafiltration membrane bioreactor was evaluated for biodegradation of methyl tert-butyl ether (MTBE) in contaminated water. The system was fed 5 mg/L MTBE in granular activated carbon (GAC) treated Cincinnati tap water containing ample buffer and nutrients. Within 120...

  17. IRIS Toxicological Review of Tetrahydrofuran (THF) ...

    Science.gov (United States)

    EPA is releasing the draft report, Toxicological Review of Tetrahydrofuran, that was distributed to Federal agencies and White House Offices for comment during the Science Discussion step of the IRIS Assessment Development Process. Comments received from other Federal agencies and White House Offices are provided below with external peer review panel comments. EPA is undertaking an Integrated Risk Information System (IRIS) health assessment for tetrahydrofuran. IRIS is an EPA database containing Agency scientific positions on potential adverse human health effects that may result from chronic (or lifetime) exposure to chemicals in the environment. IRIS contains chemical-specific summaries of qualitative and quantitative health information in support of two steps of the risk assessment paradigm, i.e., hazard identification and dose-response evaluation. IRIS assessments are used in combination with specific situational exposure assessment information to evaluate potential public health risk associated with environmental contaminants.

  18. Trends in the occurrence of MTBE in drinking water in the Northeast United States

    Science.gov (United States)

    Moran, M.J.

    2007-01-01

    Public water systems in Connecticut, Maine, Maryland, New Hampshire, New Jersey, and Rhode Island sampled treated drinking water from 1993-2006 and analyzed the samples for MTBE. The US Geological Survey examined trends in the occurrence of MTBE in drinking water derived from ground water in these States for two near-decadal time steps; 1993-1999 and 2000-2006. MTBE was detected in 14% of drinking water samples collected in all States from 1993-1999 and in 19% of drinking water samples collected from the same systems from 2000-2006 and this difference was statistically significant. Trends in the occurrence of MTBE in each State by individual year indicated significant positive trends in Maryland and New Hampshire. Significant, increasing trends in MTBE concentrations were observed in Maryland and Rhode Island by individual year. This is an abstract of a paper presented at the 2007 Petroleum Hydrocarbons and Organic Chemicals in Ground Water: Prevention, Assessment and Remediation Conference (Houston, TX 11/5-6/2007).

  19. MICROBIAL ANALYSIS OF MTBE, BTEX BIOREMEDIATION: BIONETS CONTAINING PM1, SOS, ISOLITE.

    Science.gov (United States)

    MTBE and BTEX (benzene, toluene, ethylbenzene, and xylene) are major problems of many sites in the United States. The objective of this study was to determine if biologically active in-situ BioNets could bioremediation MTBE and BTEX contaminated groundwater. Seven BioNets were ...

  20. MICROBIAL ANALYSIS OF MTBE, BTEX BIOREMEDIATION: BIONETS CONTAINING PM1, SOS, ISOLITE�

    Science.gov (United States)

    MTBE and BTEX (benzene, toluene, ethylbenzene, and xylene) are major problems of many sites in the United States. The objective of this study was to determine if biologically active in-situ BioNets could bioremediate MTBE and BTEX contaminated groundwater. Seven BioNets were plac...

  1. The chances for green petrol. Alternative for MTBE is ethylene tertiary butylether; Kans op groenere benzine stijgt. Alternatief voor MTBE is etheen tertiair butyl ether

    Energy Technology Data Exchange (ETDEWEB)

    Van de Graaf, A.; Steentjes, A. [eds.

    2000-05-03

    To find a useful and environment-friendly fuel is difficult. Lead and benzene already were replaced by methyl tertiary butylether (MTBE), but this fuel additive too appears to be hazardous for man and the environment. When MTBE will be banned the chances for so-called green petrol (made from biomass) are rising. A brief overview of the developments in the field of fuel additives so far is given.

  2. Effects of gasoline components on MTBE and TBA cometabolism by Mycobacterium austroafricanum JOB5.

    Science.gov (United States)

    House, Alan J; Hyman, Michael R

    2010-07-01

    In this study we have examined the effects of individual gasoline hydrocarbons (C(5-10,12,14) n-alkanes, C(5-8) isoalkanes, alicyclics [cyclopentane and methylcyclopentane] and BTEX compounds [benzene, toluene, ethylbenzene, m-, o-, and p-xylene]) on cometabolism of methyl tertiary butyl ether (MTBE) and tertiary butyl alcohol (TBA) by Mycobacterium austroafricanum JOB5. All of the alkanes tested supported growth and both MTBE and TBA oxidation. Growth on C(5-8) n-alkanes and isoalkanes was inhibited by acetylene whereas growth on longer chain n-alkanes was largely unaffected by this gas. However, oxidation of both MTBE and TBA by resting cells was consistently inhibited by acetylene, irrespective of the alkane used as growth-supporting substrate. A model involving two separate but co-expressed alkane-oxidizing enzyme systems is proposed to account for these observations. Cyclopentane, methylcyclopentane, benzene and ethylbenzene did not support growth but these compounds all inhibited MTBE and TBA oxidation by alkane-grown cells. In the case of benzene, the inhibition was shown to be due to competitive interactions with both MTBE and TBA. Several aromatic compounds (p-xylene > toluene > m-xylene) did support growth and cells previously grown on these substrates also oxidized MTBE and TBA. Low concentrations of toluene (TBA oxidation by alkane-grown cells whereas higher concentrations were inhibitory. The effects of acetylene suggest strain JOB5 also has two distinct toluene-oxidizing activities. These results have been discussed in terms of their impact on our understanding of MTBE and TBA cometabolism and the enzymes involved in these processes in mycobacteria and other bacteria.

  3. Two-year drinking water carcinogenicity study of methyl tertiary-butyl ether (MTBE) in Wistar rats.

    Science.gov (United States)

    Dodd, Darol; Willson, Gabrielle; Parkinson, Horace; Bermudez, Edilberto

    2013-07-01

    Methyl tertiary-butyl ether (MTBE) has been used as a gasoline additive to reduce tailpipe emissions and its use has been discontinued. There remains a concern that drinking water sources have been contaminated with MTBE. A two-year drinking water carcinogenicity study of MTBE was conducted in Wistar rats (males, 0, 0.5, 3, 7.5 mg ml(-1); and females, 0, 0.5, 3, and 15 mg ml(-1)). Body weights were unaffected and water consumption was reduced in MTBE-exposed males and females. Wet weights of male kidneys were increased at the end of two years of exposure to 7.5 mg ml(-1) MTBE. Chronic progressive nephropathy was observed in males and females, was more severe in males, and was exacerbated in the high MTBE exposure groups. Brain was the only tissue with a statistically significant finding of neoplasms. One astrocytoma (1/50) was found in a female rat (15 mg ml(-1)). The incidence of brain astrocytomas in male rats was 1/50, 1/50, 1/50 and 4/50 for the 0, 0.5, 3 and 7.5 mg ml(-1) exposure groups, respectively. This was a marginally significant statistical trend, but not statistically significant when pairwise comparisons were made or when multiple comparisons were taken into account. The incidence of astrocytoma fell within historical control ranges for Wistar rats, and the brain has not been identified as a target organ following chronic administration of MTBE, ethyl tert-butyl ether, or tertiary butyl alcohol (in drinking water) to mice and rats. We conclude that the astrocytomas observed in this study are not associated with exposure to MTBE. Copyright © 2011 John Wiley & Sons, Ltd.

  4. REMEDIATION OF MTBE - CONTAMINATED WATER: STUDIES ON THE DEGRADATION OF MTBE INTERMEDIATES USING THE FENTON'S REAGENT

    Science.gov (United States)

    The recent findings of unusual oncentrations of MTBE in groundwater aquifers and surface waters [1] originated most probably from the leaking of underground storage gasoline tanks [2[ has led to a series of judicial and legislative actions, especially in the state of California w...

  5. Quantifying MTBE biodegradation in the Vandenberg Air Force Base ethanol release study using stable carbon isotopes

    Science.gov (United States)

    McKelvie, Jennifer R.; Mackay, Douglas M.; de Sieyes, Nicholas R.; Lacrampe-Couloume, Georges; Sherwood Lollar, Barbara

    2007-12-01

    Compound-specific isotope analysis (CSIA) was used to assess biodegradation of MTBE and TBA during an ethanol release study at Vandenberg Air Force Base. Two continuous side-by-side field releases were conducted within a preexisting MTBE plume to form two lanes. The first involved the continuous injection of site groundwater amended with benzene, toluene and o-xylene ("No ethanol lane"), while the other involved the continuous injection of site groundwater amended with benzene, toluene and o-xylene and ethanol ("With ethanol lane"). The δ 13C of MTBE for all wells in the "No ethanol lane" remained constant during the experiment with a mean value of - 31.3 ± 0.5‰ ( n = 40), suggesting the absence of any substantial MTBE biodegradation in this lane. In contrast, substantial enrichment in 13C of MTBE by 40.6‰, was measured in the "With ethanol lane", consistent with the effects of biodegradation. A substantial amount of TBA (up to 1200 μg/L) was produced by the biodegradation of MTBE in the "With ethanol lane". The mean value of δ 13C for TBA in groundwater samples in the "With ethanol lane" was - 26.0 ± 1.0‰ ( n = 32). Uniform δ 13C TBA values through space and time in this lane suggest that substantial anaerobic biodegradation of TBA did not occur during the experiment. Using the reported range in isotopic enrichment factors for MTBE of - 9.2‰ to - 15.6‰, and values of δ 13C of MTBE in groundwater samples, MTBE first-order biodegradation rates in the "With ethanol lane" were 12.0 to 20.3 year - 1 ( n = 18). The isotope-derived rate constants are in good agreement with the previously published rate constant of 16.8 year - 1 calculated using contaminant mass-discharge for the "With ethanol lane".

  6. Fenton-Driven Chemical Regeneration of MTBE-Spent Granular Activated Carbon -- A Pilot Study

    Science.gov (United States)

    MTBE-spent granular activated carbon (GAC) underwent 3 adsorption/oxidation cycles. Pilot-scale columns were intermittently placed on-line at a ground water pump and treat facility, saturated with MTBE, and regenerated with H2O2 under different chemical, physical, and operational...

  7. REMEDIATION OF MTBE FROM DRINKING WATER: AIR STRIPPING FOLLOWED BY OFF-GAS ADSORPTION

    Science.gov (United States)

    The widespread use of methyl tertiary butyl ether (MTBE) as an oxygenate in gasoline has resulted in the contamination of a large number of ground and surface water sources. Even though air stripping has been proven to be an effective treatment technology for MTBE removal, off-ga...

  8. Long term studies on the anaerobic biodegradability of MTBE and other gasoline ethers

    DEFF Research Database (Denmark)

    Waul, Christopher Kevin; Arvin, Erik; Schmidt, Jens Ejbye

    2009-01-01

    to investigate the anaerobic biodegradability of MTBE and other gasoline ethers. Inoculums collected from various environments were used, along with different electron acceptors. Only one set of the batch experiments showed a 30-60% conversion of MTBE to tert-butyl alcohol under Fe(III)-reducing conditions...

  9. Biodegradation of methyl tertiary butyl ether (MTBE) using a granular activated carbon trickling filter

    Energy Technology Data Exchange (ETDEWEB)

    Converse, B.M.; Schroeder, E.D.; Chang, D.P.Y.

    1999-07-01

    A pilot scale trickling filter was constructed using granular activated carbon (GAC) as the packing medium and inoculated with a microbial culture known to degrade MTBE. The packing dimensions were 0.076 m in diameter and 0.22 m deep. The unit operated with recycling flow for two months before a biofilm was observed on the GAC. After two additional months the biofilm had visibly spread throughout the packing. A few pieces of GAC were placed in a sealed bottle with MTBE-contaminated water and nutrients. Headspace analysis performed over 14 days confirmed that MTBE degradation was occurring. The trickling filter was converted to continuous flow and operated for one month at a nominal flow rate of 0.1 L/min and a hydraulic loading rate of 32 m{sup 3}/m{sup 2}-d. Samples were collected for analysis at the spray nozzle and at the bottom of the trickling filter. Fractional removal varied with influent MTBE concentration, temperature and liquid flow rate. Percent MTBE removal was as high as 85%. A mechanical failure resulted in the trickling filter bed drying and percent removal dropping to less than 1 percent. However, the system recovered within five days.

  10. Thiophene Scaffold as Prospective Central Nervous System Agent: A Review.

    Science.gov (United States)

    Deep, Aakash; Narasimhan, Balasubramanian; Aggarwal, Swati; Kaushik, Dhirender; Sharma, Arun K

    2016-01-01

    Heterocyclic compounds are extensively dispersed in nature and are vital for life. Various investigational approaches towards Structural Activity Relationship that focus upon the exploration of optimized candidates have become vastly important. Literature studies tell that for a series of compounds that are imperative in industrial and medicinal chemistry, thiophene acts as parent. Among various classes of heterocyclic compounds that have potential central nervous system activity, thiophene is the most important one. In the largely escalating chemical world of heterocyclic compounds showing potential pharmacological character, thiophene nucleus has been recognized as the budding entity. Seventeen Papers were included in this review article to define the central nervous system potential of thiophene. This review article enlightens the rationalized use and scope of thiophene scaffold as novel central nervous system activity such as anticonvulsant, acetylcholinesterase inhibitor, cyclin-dependent kinase 5 (cdk5/p25) inhibitors, CNS depressant, capability to block norepinephrine, serotonin and dopamine reuptake by their respective transporters etc. The Finding of this review confirm the importance of thiophene scaffold as potential central nervous system agents. From this outcome, ideas for future molecular modifications leading to the novel derivatives with better constructive pharmacological potential may be derived.

  11. Analysis of dissolved benzene plumes and methyl tertiary butyl ether (MTBE) plumes in ground water at leaking underground fuel tank (LUFT) sites

    International Nuclear Information System (INIS)

    Happel, A.M.; Rice, D.; Beckenbach, E.; Savalin, L.; Temko, H.; Rempel, R.; Dooher, B.

    1996-11-01

    The 1990 Clean Air Act Amendments mandate the addition of oxygenates to gasoline products to abate air pollution. Currently, many areas of the country utilize oxygenated or reformulated fuel containing 15- percent and I I-percent MTBE by volume, respectively. This increased use of MTBE in gasoline products has resulted in accidental point source releases of MTBE containing gasoline products to ground water. Recent studies have shown MTBE to be frequently detected in samples of shallow ground water from urban areas throughout the United States (Squillace et al., 1995). Knowledge of the subsurface fate and transport of MTBE in ground water at leaking underground fuel tank (LUFT) sites and the spatial extent of MTBE plumes is needed to address these releases. The goal of this research is to utilize data from a large number of LUFT sites to gain insights into the fate, transport, and spatial extent of MTBE plumes. Specific goals include defining the spatial configuration of dissolved MTBE plumes, evaluating plume stability or degradation over time, evaluating the impact of point source releases of MTBE to ground water, and attempting to identify the controlling factors influencing the magnitude and extent of the MTBE plumes. We are examining the relationships between dissolved TPH, BTEX, and MTBE plumes at LUFT sites using parallel approaches of best professional judgment and a computer-aided plume model fitting procedure to determine plume parameters. Here we present our initial results comparing dissolved benzene and MTBE plumes lengths, the statistical significance of these results, and configuration of benzene and MTBE plumes at individual LUFT sites

  12. Densities at high pressures and derived properties of thiophenes

    International Nuclear Information System (INIS)

    Antón, V.; Lomba, L.; Cea, P.; Giner, B.; Lafuente, C.

    2017-01-01

    Highlights: • The pρT behaviour of four members of the thiophene family has been studied. • The experimental results have been correlated with the TRIDEN equation. • Isobaric expansibilities, isothermal compressibilities and internal pressures have been calculated. • The results were discussed in terms of structural differences among thiophenes. - Abstract: This contribution reports the densities in wide temperature (from 283.15 to 338.15 K) and pressure (from 0.1 to 65.0 MPa) ranges of four members of the thiophene family (thiophene, 2-methylthiophene, 3-methylthiophene and 2,5-dimethylthiophene). These densities have been satisfactorily correlated by means of the TRIDEN equation. From these data, several derived properties as isobaric expansibility, isothermal compressibility, and internal pressure have been estimated. Using all these properties, interesting information about molecular organization can be deduced.

  13. EFFECT OF BTEX ON THE DEGRADATION OF MTBE AND TBA BY MIXED BACTERIAL CONSORTIUM

    Science.gov (United States)

    Methyl tert-butyl ether (MTBE) contamination in groundwater often coexists with benzene, toluene, ethylbenzene, and xylene (BTEX) near the source of the plume. Tertiary butyl alcohol (TBA) is a prevalent intermediate of MTBE degradation. Therefore, there is a significant p...

  14. Aminopropyl thiophene compounds

    Science.gov (United States)

    Goodman, Mark M.; Knapp, Jr., Furn F.

    1990-01-01

    Radiopharmaceuticals useful in brain imaging comprising radiohalogenated thienylethylamine derivatives. The compounds are 5-halo-thiophene-2-isopropyl amines able to cross the blood-brain barrier and be retained for a sufficient length of time to allow the evaluation of regional blood flow by radioimaging of the brain.

  15. Sorption of methyl tert-butyl ether (MTBE) and tert-butyl alcohol (TBA) to synthetic resins.

    Science.gov (United States)

    Bi, Erping; Haderlein, Stefan B; Schmidt, Torsten C

    2005-10-01

    Methyl tert-butyl ether (MTBE) is a widely used gasoline oxygenate. Contamination of MTBE and its major degradation product tert-butyl alcohol (TBA) in groundwater and surface water has received great attention. However, sorption affinity and sorption mechanisms of MTBE and TBA to synthetic resins, which can be potentially used in removal of these contaminants from water, in passive sampling, or in enrichment of bacteria, have not been studied systemically. In this study, kinetic and equilibrium sorption experiments (single solute and binary mixtures) on four synthetic resins were conducted. The sorption affinity of the investigated sorbents for MTBE and TBA decreases in the order Ambersorb 563>Optipore L493>Amberlite XAD4>Amberlite XAD7, and all show higher sorption affinity for MTBE than for TBA. Binary experiments with o-xylene, a major compound of gasoline as co-contaminant, imply that all resins preferentially sorb o-xylene over MTBE or TBA, i.e., there is sorption competition. In the equilibrium aqueous concentration (Ceq) range (0.1-139.0 mg/L for MTBE, and 0.01-48.4 mg/L for TBA), experimental and modeling results as well as sorbent characteristics indicate that micropore filling and/or some other type of adsorption process (e.g., adsorption to specific sites of high sorption potential at low concentrations) rather than partitioning were the dominant sorption mechanisms. Optipore L493 has favourable sorption and desorption characteristics, and is a suitable sorbent, e.g., in bacteria enrichment or passive sampling for moderately polar compounds. However, for highly polar compounds such as TBA, Ambersorb 563 might be a better choice, especially in water treatment.

  16. Water quality and MTBE water pollution; Evidenze di presenza di MTBE sulle acque sotterranee di aree a rischio

    Energy Technology Data Exchange (ETDEWEB)

    Buiatti, M.; Mascini, M.; Monanni, R. [Florence Univ., Florence (Italy). Centro Interdipartimentale Biotecnologie Agrarie Chimiche Industriali; Agati, L.; Bartoli, C.; Bolletti, P.; Cortonesi, B.; Martinelli, L. [Agenzia Regionale per la Protezione dell' Ambiente della Toscana, Florence (Italy); Filipponi, M.; Piangoloni, A. [Nuove Acque SpA,, Arezzo (Italy); Mancini, G. [Autorita' di ambito territoriale ottimale n.4, Arezzo (Italy)

    2001-11-01

    The research project, here presented, was defined with the aim of evaluating the eventual presence of MTBE and the possible relative impact in water destined to human use; the territorial valence of the project was extended to the competence region n. 4 of the Tuscany water authority (AATO n. 4). University of Florence, ARPAT, AATO n. 4 and Nuove Acque SpA, in this role of manager for the integrated water cycle in the country, have productively contributed to the project. [Italian] La Nuove Acque SpA, soggetto gestore del ciclo idrico integrato, l'Universita' degli Studi di Firenze, l'Agenzia Regionale per la Protezione Ambientale e l'Autorita' di Ambito Territoriale hanno realizzato un progetto di verifica e messa a punto delle metodologie analitiche per il monitoraggio delle eventuali presenze di MTBE nelle acque, con particolare riferimento agli acquiferi sotterranei.

  17. Fenton-like Degradation of MTBE: Effects of Iron Counter Anion and Radical Scavengers

    Science.gov (United States)

    Fenton-driven oxidation of Methyl tert-butyl ether (MTBE) (0.11-0.16 mM) in batch reactors containing ferric iron (5 mM), hydrogen peroxide (H2O2) (6 mM) (pH=3) was performed to investigate MTBE transformation mechanisms. Independent variables included the form of iron (Fe) (Fe2(...

  18. MICROBIAL ANALYSIS OF MTBE, BTEX BIOREMEDIATION: BIONETS(TM) CONTAINING PM1, SOS, ISOLITE (R)

    Science.gov (United States)

    MTBE and BTEX (benzene, toluene, ethylbenzene, and xylene) are major problems of many sites in the United States. The objective of this study was to determine if biologically active in-situ BioNets could bioremediation MTBE and BTEX contaminated groundwater. Seven BioNets were ...

  19. Aminopropyl thiophene compounds

    International Nuclear Information System (INIS)

    Goodman, M.M.; Knapp, F.F.

    1990-01-01

    This patent describes radiopharmaceuticals useful in brain imaging comprising radiohalogenated thienylethylamine derivatives. The compounds are 5-halo-thiophene-2-isopropyl amines able to cross the blood-brain barrier and be retained for a sufficient length of time to allow the evaluation of regional blood flow by radioimaging of the brain

  20. Separation of thiophene from heptane with ionic liquids

    International Nuclear Information System (INIS)

    Domańska, Urszula; Lukoshko, Elena Vadimovna; Królikowski, Marek

    2013-01-01

    Highlights: ► The ternary (liquid + liquid) equilibria in 1-butyl-1-methylpyrrolidinium-based ILs was measured. ► High selectivity and distribution ratio for the extraction of thiophene was found. ► [BMPYR][TCM] was proposed as entrainer for the separation process. ► Extraction of sulphur-compounds from alkanes was proposed. -- Abstract: Ionic liquids (ILs) are well known novel green solvents, which can be used for removing sulfur compounds from gasoline and diesel oils. Ternary (liquid + liquid) equilibrium data are presented for mixtures of {ionic liquid (1) + thiophene (2) + heptane (3)} at T = 298.15 K and ambient pressure to analyze the performance of the ionic liquid (IL) in the extraction of thiophene from the alkanes. Three pyrrolidinium-based ionic liquids have been studied: 1-butyl-1-methylpyrrolidinium tris(pentafluoroethyl)trifluorophosphate, ([BMPYR][FAP]), 1-butyl-1-methylpyrrolidinium tetracyanoborate, [BMPYR][TCB] and 1-butyl-1-methylpyrrolidinium tricyanomethanide, [BMPYR][TCM]. The results are discussed in terms of the selectivity and distribution ratio of separation of related systems. The immiscibility in the binary liquid systems of (thiophene + heptane) with all used ILs was observed. The [TCM] − anion in comparison with [TCB] − and [FAP] − anions shows much higher selectivity and slightly lower distribution ratio for extraction of thiophene. The non-random two liquid NRTL model was used successfully to correlate the experimental tie-lines and to calculate the phase composition error in mole fraction in the ternary systems. The average root mean square deviation (RMSD) of the phase composition was 0.047. The densities of [BMPYR][TCM] in temperature range from (298.15 to 348.15) K were measured. The data presented here show that the [BMPYR][TCM] ionic liquid can be used as an alternative solvent for the separation of thiophene from the hydrocarbon stream using solvent liquid–liquid extraction at ambient conditions

  1. AIR STRIPPING AND OFF-GAS ADSORPTION FOR THE REMOVAL OF MTBE FROM DRINKING WATER

    Science.gov (United States)

    Methyl-tertiary butyl ether (MTBE) is a synthetic organic chemical, primarily used for oxgenating fuel. The 1990 Federal Clean Air Act Amendments mandated the use of fuel oxgenates in areas where air quality did not meet national standards, which led to widespread use of MTBE in...

  2. Model description and kinetic parameter analysis of MTBE biodegradation in a packed bed reactor

    DEFF Research Database (Denmark)

    Waul, Christopher Kevin; Arvin, Erik; Schmidt, Jens Ejbye

    2008-01-01

    A dynamic modeling approach was used to estimate in-situ model parameters, which describe the degradation of methyl tert-butyl ether (MTBE) in a laboratory packed bed reactor. The measured dynamic response of MTBE pulses injected at the reactor's inlet was analyzed by least squares and parameter...

  3. IRIS Toxicological Review of Tetrahydrofuran (THF) (Final Report)

    Science.gov (United States)

    EPA has released the Toxicological Review of Tetrahydrofuran: in support of the Integrated Risk Information System (IRIS). Now final, this assessment may be used by EPA’s program and regional offices to inform decisions to protect human health.

  4. In Situ Biodegradation of MTBE and TBA

    Science.gov (United States)

    Ground water at most UST spills sites in Kansas contains both MTBE and benzene, and both contaminants must be effectively treated to close the sites. Soil vacuum extraction, and air sparging are common treatment technologies in Kansas. The technologies supply oxygen to support ...

  5. Thermodynamic properties of hyperbranched polymer, Boltorn U3000, using inverse gas chromatography.

    Science.gov (United States)

    Domańska, Urszula; Zołek-Tryznowska, Zuzanna

    2009-11-19

    Mass-fraction activity coefficients at infinite dilution (Omega13(infinity)) of alkanes (C5-C10), cycloalkanes (C5-C8), alkenes (C5-C8), alkynes (C5-C8), aromatic hydrocarbons (benzene, toluene, ethylbenzene, o-, m-, p-xylene, thiophene), alcohols (C1-C5), water, ethers (tetrahydrofuran (THF), methyl-tert-butylether (MTBE), diethyl-, di-n-propyl-, di-n-butyl ether), and ketones (propanone, 2-pentanone, 3-pentanone, 2-hexanone, 3-hexanone, cyclopentanone) in the hyperbranched polymer, Boltorn U3000 (B-U3000), have been determined by inverse gas chromatography (IGC) using the polymer as the stationary phase. The measurements were carried out at different temperatures between 308.15 and 348.15 K. The density and thermophysical properties of polymer were described. The specific retention volume (V(g)), the Flory-Huggins interaction parameter (chi13(infinity)), the molar enthalpy of sorption (the partial molar enthalpies of solute dissolution) (Delta(s)H), the partial molar excess enthalpy at infinite dilution of the solute and polymer (DeltaH1(E,infinity)), the partial molar Gibbs excess energy at infinite dilution (DeltaG1(E,infinity)), and the solubility parameter (delta3) were calculated.

  6. Risicogrenzen voor MTBE (Methyl tertiair-Butyl Ether) in bodem, sediment, grondwater, oppervlaktewater en voor drinkwaterbereiding

    NARCIS (Netherlands)

    Swartjes FA; Baars AJ; Fleuren RHLJ; Otte PF; LER

    2004-01-01

    Recentelijk is politieke commotie ontstaan ten gevolge van de mogelijke schadelijke gezondheidseffecten van Methyl tertiair-Butyl Ether (MTBE). Dit was reden voor het ministerie van VROM om het RIVM te verzoeken risicogrenzen voor MTBE in bodem, sediment, grondwater, oppervlaktewater, drinkwater en

  7. Simulation of methyl tert-butyl ether (MTBE) transport to ground water from immobile sources of gasoline in the vadose zone

    Science.gov (United States)

    Lahvis, M.A.; Rehmann, L.C.

    1999-01-01

    The mathematical model, R-UNSAT, developed to simulate the transport of benzene and MTBE in representative sand and clay hydrogeologic systems was evaluated. The effects on groundwater were simulated for small, chronic-, and single-volume releases of gasoline trapped in unsaturated soil. Hydrocarbon biodegradation was simulated by using a dual Monod-type kinetics model that includes oxygen and the reactive constituents. MTBE was assumed to be non-reactive. For MTBE, infiltration had the greatest effect on transport to groundwater. Infiltration also affected mass losses of MTBE to the atmosphere, particularly, in fine-grained soils. Depth to groundwater and soil type primarily affected travel times of MTBE to groundwater, but could affect mass-loading rates to groundwater if infiltration is insignificant. For benzene, transport to groundwater was significant only if the depth to the water table was groundwater were generally smaller for benzene than for MTBE by more than two orders of magnitude. Thus, water that recharges an aquifer beneath a spill can be enriched in MTBE relative to benzene when compared to the composition of water in equilibrium with gasoline.

  8. Investigation of MTBE and aromatic compound concentrations at a gas service station.

    Science.gov (United States)

    Lin, Chi-Wen; Chiang, Song-Bor; Lu, San-Ju

    2005-06-01

    Methyl tert-butyl ether (MTBE) has been used as a fuel additive at levels of 2-11% in Taiwan for the past decade. The purpose of this additive is to enhance the octane, replace the use of lead-based anti-knock gasoline additives and reduce aromatic hydrocarbons. However, it is possible that oxygenated fuel has a potential health impact. To determine the air quality impact of MTBE, measurements were made of ambient MTBE and other gasoline constituents at a service station. Additionally, environmental conditions (wind speed, wind direction, and temperature, etc.) that could affect concentrations of emission constituents were measured. Gas samples were analyzed for target MTBE and volatile organic compounds, e.g., benzene and toluene. Ambient samples were collected using Tenax adsorbent tubes for mass spectrometric analysis at a service station located in Changhua County, Taiwan. The resulting measured ambient air concentrations were compared with Taiwan's regulatory standards for hazardous air pollutants. Subsequently, the factors controlling the formation of high-VOC levels at the service station and in the residential neighborhoods were identified. Additionally, the results can provide the Environmental Protection Agency (EPA) of Taiwan with useful information and prompt them to mandate this gas service station to install a refueling vapor recovery system.

  9. Conversion of methanol and isobutanol to MTBE

    CSIR Research Space (South Africa)

    Nicolaides, CP

    1993-09-24

    Full Text Available Over the resin catalyst Amberlyst 15, and under our reaction conditions, the yield of MTBE (methyl tert-butyl ether), from the reaction of methanol and isobutene, is at a maximum in the temperature rang of 40-60-degrees-C. Slightly higher...

  10. Product formation from thiophene by a mixed bacterial culture. Influence of benzene as growth substrate

    DEFF Research Database (Denmark)

    Rivas, Isabelle Marie; Mosbæk, Hans; Arvin, Erik

    2003-01-01

    phase of transformation. The microorganisms were able to transform thiophene in the absence of benzene at a zero-order rate. Thiophene was converted to five oxidation products, regardless of the presence of benzene. Benzene had no influence on the distribution of these oxidation products. The main...... oxidation product, a thiophene sulphoxide dimer, represented 78+/-12% of the transformed thiophene, while the second most important product, also a thiophene sulphoxide dimer, represented 20+/-2% of the converted thiophene. (C) 2003 Elsevier Science Ltd. All rights reserved....

  11. The rapid detection of methyl tert-butyl ether (MtBE) in water using a prototype gas sensor system.

    Science.gov (United States)

    de Lacy Costello, B P J; Sivanand, P S; Ratcliffe, N M; Reynolds, D M

    2005-01-01

    The gasoline additive Methyl-tertiary-Butyl Ether (MtBE) is the second most common contaminant of groundwater in the USA and represents an important soil contaminant. This compound has been detected in the groundwater in at least 27 states as a result of leaking underground storage facilities (gasoline storage tanks and pipelines). Since the health effects of MtBE are unclear the potential threat to drinking water supplies is serious. Therefore, the ability to detect MtBE at low levels (ppb) and on-line at high-risk groundwater sites would be highly desirable. This paper reports the use of 'commercial' and metal oxide sensor arrays for the detection of MtBE in drinking and surface waters at low ppb level (microg.L(-1) range). The output responses from some of the sensors were found to correlate well with MtBE concentrations under laboratory conditions.

  12. Aerobic microbial metabolism of condensed thiophenes found in petroleum

    International Nuclear Information System (INIS)

    Kropp, K. G.

    1997-01-01

    The aerobic microbial degradation of 21 condensed thiophenes found in petroleum or synthetic fuels have been studied, motivated by recent research which showed that resistance to biodegradation increases with increasing methyl-substitution. The specific objective was to identify metabolites in pure cultures of aromatic hydrocarbon-degrading Pseudomonas spp. incubated in mineral medium in the presence of an aromatic growth substrate and a condensed thiophene. Over 80 metabolites of the condensed thiophenes were identified using gas chromatography analysis with an atomic emission detector. Among the metabolites identified were sulfoxides, sulfones, hydroxy- and carboxyl-substituted benzothiophenes, hydroxy-substituted dibenzothiophenes, substituted benzothiophene-2,3-diones, and 3-hydroxy-2-formylbenzothiophenes

  13. Biodegradation of MTBE in reactors

    OpenAIRE

    Waul, Christopher Kevin; Arvin, Erik; Schmidt, Jens Ejbye

    2007-01-01

    The fuel oxygenate methyl tert-butyl ether (MTBE) was first introduced in the 1970’s to improve gasoline combustion efficiency and reduce emission of harmful gases. However, it has caused groundwater contamination in Denmark and in many locations worldwide through accidental releases from leaking underground gasoline storage tanks and pipelines. Both laboratory experiments and mathematical computer models were used to acquire knowledge on the scientific and engineering aspects related to the ...

  14. Anaerobic desulphurisation of thiophenes by mixed microbial communities from oilfields

    NARCIS (Netherlands)

    Marcelis, C.L.M.; Ivanova, A.E.; Janssen, A.J.H.; Stams, A.J.M.

    2003-01-01

    Anaerobic enrichment cultures obtained from oil fields degraded various thiophenic compounds i.e. thiophene, benzothiophene and dibenzothiophene, with the concomitant formation of sulphide using hydrogen, lactate and ethanol as possible electron donors. It was demonstrated that dibenzothiophene was

  15. INHALATION EXPOSURE TO METHYL TERT-BUTYL ETHER (MTBE) AND DIBROMOCHLOROMETHANE (DBCM) USING CONTINUOUS BREATH ANALYSIS

    Science.gov (United States)

    The oxygenate methyl tert-butyl ether (MTBE) has been added to gasoline to help meet national ambient air quality standards in those parts of the U.S. that are non-compliant for carbon monoxide. Although MTBE has provided important health benefits in terms of reduced haza...

  16. Role of back diffusion and biodegradation reactions in sustaining an MTBE/TBA plume in alluvial media.

    Science.gov (United States)

    Rasa, Ehsan; Chapman, Steven W; Bekins, Barbara A; Fogg, Graham E; Scow, Kate M; Mackay, Douglas M

    2011-11-01

    A methyl tert-butyl ether (MTBE) / tert-butyl alcohol (TBA) plume originating from a gasoline spill in late 1994 at Vandenberg Air Force Base (VAFB) persisted for over 15 years within 200 feet of the original spill source. The plume persisted until 2010 despite excavation of the tanks and piping within months after the spill and excavations of additional contaminated sediments from the source area in 2007 and 2008. The probable history of MTBE concentrations along the plume centerline at its source was estimated using a wide variety of available information, including published details about the original spill, excavations and monitoring by VAFB consultants, and our own research data. Two-dimensional reactive transport simulations of MTBE along the plume centerline were conducted for a 20-year period following the spill. These analyses suggest that MTBE diffused from the thin anaerobic aquifer into the adjacent anaerobic silts and transformed to TBA in both aquifer and silt layers. The model reproduces the observation that after 2004 TBA was the dominant solute, diffusing back out of the silts into the aquifer and sustaining plume concentrations much longer than would have been the case in the absence of such diffusive exchange. Simulations also suggest that aerobic degradation of MTBE or TBA at the water table in the overlying silt layer significantly affected concentrations of MTBE and TBA by limiting the chemical mass available for back diffusion to the aquifer. Copyright © 2011 Elsevier B.V. All rights reserved.

  17. BTEX and MTBE adsorption onto raw and thermally modified diatomite.

    Science.gov (United States)

    Aivalioti, Maria; Vamvasakis, Ioannis; Gidarakos, Evangelos

    2010-06-15

    The removal of BTEX (benzene, toluene, ethyl-benzene and xylenes) and MTBE (methyl tertiary butyl ether) from aqueous solution by raw (D(R)) and thermally modified diatomite at 550, 750 and 950 degrees C (D(550), D(750) and D(950) respectively) was studied. Physical characteristics of both raw and modified diatomite such as specific surface, pore volume distribution, porosity and pH(solution) were determined, indicating important structural changes in the modified diatomite, due to exposure to high temperatures. Both adsorption kinetic and isotherm experiments were carried out. The kinetics data proved a closer fit to the pseudo-second order model. Maximum values for the rate constant, k(2), were obtained for MTBE and benzene (48.9326 and 18.0996 g mg(-1)h(-1), respectively) in sample D(550). The isotherm data proved to fit the Freundlich model more closely, which produced values of the isotherm constant 1/n higher than one, indicating unfavorable adsorption. The highest adsorption capacity, calculated through the values of the isotherm constant k(F), was obtained for MTBE (48.42 mg kg(-1) (mg/L)(n)) in sample D(950). Copyright 2010 Elsevier B.V. All rights reserved.

  18. Peculiarities of spin polarization inversion at a thiophene/cobalt interface

    KAUST Repository

    Wang, Xuhui; Manchon, Aurelien; Schwingenschlö gl, Udo; Zhu, Zhiyong

    2013-01-01

    We perform ab initio calculations to investigate the spin polarization at the interface between a thiophene molecule and cobalt substrate. We find that the reduced symmetry in the presence of a sulfur atom (in the thiophene molecule) leads to a

  19. Review of quantitative surveys of the length and stability of MTBE, TBA, and benzene plumes in groundwater at UST sites.

    Science.gov (United States)

    Connor, John A; Kamath, Roopa; Walker, Kenneth L; McHugh, Thomas E

    2015-01-01

    Quantitative information regarding the length and stability condition of groundwater plumes of benzene, methyl tert-butyl ether (MTBE), and tert-butyl alcohol (TBA) has been compiled from thousands of underground storage tank (UST) sites in the United States where gasoline fuel releases have occurred. This paper presents a review and summary of 13 published scientific surveys, of which 10 address benzene and/or MTBE plumes only, and 3 address benzene, MTBE, and TBA plumes. These data show the observed lengths of benzene and MTBE plumes to be relatively consistent among various regions and hydrogeologic settings, with median lengths at a delineation limit of 10 µg/L falling into relatively narrow ranges from 101 to 185 feet for benzene and 110 to 178 feet for MTBE. The observed statistical distributions of MTBE and benzene plumes show the two plume types to be of comparable lengths, with 90th percentile MTBE plume lengths moderately exceeding benzene plume lengths by 16% at a 10-µg/L delineation limit (400 feet vs. 345 feet) and 25% at a 5-µg/L delineation limit (530 feet vs. 425 feet). Stability analyses for benzene and MTBE plumes found 94 and 93% of these plumes, respectively, to be in a nonexpanding condition, and over 91% of individual monitoring wells to exhibit nonincreasing concentration trends. Three published studies addressing TBA found TBA plumes to be of comparable length to MTBE and benzene plumes, with 86% of wells in one study showing nonincreasing concentration trends. © 2014 GSI Environmental Inc. Groundwater published by Wiley Periodicals, Inc. on behalf of National Ground Water Association.

  20. Location of MTBE and toluene in the channel system of the zeolite mordenite: Adsorption and host-guest interactions

    Energy Technology Data Exchange (ETDEWEB)

    Arletti, Rossella, E-mail: rossella.arletti@unito.it [Department of Earth Sciences, University of Torino Via Valperga Caluso 35, I-10125, Torino (Italy); Martucci, Annalisa; Alberti, Alberto [Department of Earth Sciences, University of Ferrara, Via G. Saragat 1, I-44100, Ferrara (Italy); Pasti, Luisa; Nassi, Marianna [Department of Chemistry, University of Ferrara, Via L. Borsari 26, I-44100 Ferrara (Italy); Bagatin, Roberto [Research Centre for Non-Conventional Energy-Istituto ENI Donegani, Environmental Technologies, Via Fauser 4, I-28100 Novara (Italy)

    2012-10-15

    This paper reports a study of the location of Methyl Tertiary Butyl Ether (MTBE) and toluene molecules adsorbed in the pores of the organophylic zeolite mordenite from an aqueous solution. The presence of these organic molecules in the zeolite channels was revealed by structure refinement performed by the Rietveld method. About 3 molecules of MTBE and 3.6 molecules of toluene per unit cell were incorporated into the cavities of mordenite, representing 75% and 80% of the total absorption capacity of this zeolite. In both cases a water molecule was localized inside the side pocket of mordenite. The saturation capacity determined by the adsorption isotherms, obtained by batch experiments, and the weight loss given by thermogravimetric (TG) analyses were in very good agreement with these values. The interatomic distances obtained after the structural refinements suggest MTBE could be connected to the framework through a water molecule, while toluene could be bonded to framework oxygen atoms. The rapid and high adsorption of these hydrocarbons into the organophylic mordenite zeolite makes this cheap and environmental friendly material a suitable candidate for the removal of these pollutants from water. - graphical abstract: Location of MTBE (a) and toluene (b) in mordenite channels (projection along the [001] direction). Highlights: Black-Right-Pointing-Pointer We investigated the MTBE and toluene adsorption process into an organophilic zeolite mordenite. Black-Right-Pointing-Pointer The presence of MTBE and toluene in mordenite was determined by X-ray diffraction studies. Black-Right-Pointing-Pointer About 3 molecules of MTBE and 3.6 molecules of toluene per unit cell were incorporated into the zeolite cavities. Black-Right-Pointing-Pointer MTBE is connected to the framework through a water molecule. Black-Right-Pointing-Pointer Toluene is directly bonded to framework oxygen atoms.

  1. The study of interaction of lanthanum-, cerium- and neodymium chlorides with sodium borohydride in pyridine- and tetrahydrofuran medium

    International Nuclear Information System (INIS)

    Mirsaidov, U.; Rotenberg, T.G.; Dymova, T.N.

    1976-01-01

    Bis-tetrahydrofurans of lanthanum and neodymium borohydrides and bis-pyridinates of lanthanum, cerium and neodymium borohydrides were obtained by interacting sodium borohydride with lanthanum-, cerium and neodymium chlorides in pyridine and tetrahydrofuran media. All operations involving reagent combination, sampling and phase separation are performed in inert atmosphere using argonvacuum equipment. The reaction in pyridine was virtually instantaneous and accompanied by flocculanet precipitation. The interaction of lanthanum chloride and neodymium chloride with sodium borohydride in tetrahydrofuran (THF) was a slow (23-30 hr) heterophase process. The interaction rate was affected by size reduction of the intial substances, temperature, reagent proportion and mixing rate. The reaction time was twice reduced with boiling tetrahydrofuran

  2. The Effect of Water Contaminated with Methyl Tertiary Butyl Ether (MTBE) on the Rat's Weight and Tissue

    International Nuclear Information System (INIS)

    Backer, Wadiah Saleh; AboKhatwa, Ahmed Nabil; Katouah, Hanadi Ahmed

    2008-01-01

    Lead is known to cause deleterious effects on health and environment. Therefore, it was removed from car-fuel, in the United States since 1979. In January 2001, Saudi Arabia and other Arabian Gulf States, replaced lead with a synthetic organic substance called methyl tertiary-butyl ether (MTBE). MTBE is added to gasoline at 12-15%. It dissolves readily in water and evaporates quickly. This study was focused on the possible health hazards of MTBE in drinking water as manifested by changes in weight and vital tissues (heart, liver, kidney, lung, and testis) of rat. This study also aimed to establish a quantitative relationship between MTBE concentration and changes that occur to these tissues. One hundred and twenty male Wistar rats were exposed to five different MTBE concentrations (0.0, 1,000, 1,500, 2,000, 2,500 ppm) for 60 days. The results showed that most of MTBE-treated animals have revealed significant weight loss and the maximum weight loss (nearly 10 %) was achieved at the highest concentration (2,500 ppm) after 60 days of treatment. Also, both liver and heart weights were significantly reduced by almost 9%, and kidneys by 8% of MTBE concentration of 2,000 ppm. At a higher concentration (2,500 ppm), liver weight was reduced by 12%. The weight of other tissues (lungs and testes) remained unchanged. The outcome of the results may lead to hepatic disorder. This disorder could reduce plasma glucose, or increase some hepatic markers like ALT, AST, and GGT activity, or elevate the levels of sodium and chloride in plasma and may have other side effects. (author)

  3. TREATMENT OF MTBE-CONTAMINATED WATERS WITH FENTON'S REAGENT

    Science.gov (United States)

    Methyl tertiary-butyl ether (MTBE) has been commonly used as a fuel additive because of its many favorable properties that allow it to improve fuel combustion and reduce resulting concentrations of carbon monoxide and unburnt hydrocarbons. Unfortuantely, increased production a...

  4. Ternary thiophene-X-thiophene semiconductor building blocks (X = fluorene, carbazole, phenothiazine): Modulating electronic properties and electropolymerization ability by tuning the X core

    Energy Technology Data Exchange (ETDEWEB)

    Tacca, Alessandra, E-mail: alessandra.tacca@eni.com [Centro Ricerche per le Energie non Convenzionali, Istituto ENI Donegani, ENI S.p.A., Via G. Fauser 4, 28100 Novara (Italy); Po, Riccardo; Caldararo, Maria; Chiaberge, Stefano; Gila, Liliana; Longo, Luca [Centro Ricerche per le Energie non Convenzionali, Istituto ENI Donegani, ENI S.p.A., Via G. Fauser 4, 28100 Novara (Italy); Mussini, Patrizia Romana [Dipartimento di Chimica Fisica ed Elettrochimica, Universita degli Studi di Milano, Via Golgi 19, 20133 Milano (Italy); Pellegrino, Andrea; Perin, Nicola; Salvalaggio, Mario; Savoini, Alberto; Spera, Silvia [Centro Ricerche per le Energie non Convenzionali, Istituto ENI Donegani, ENI S.p.A., Via G. Fauser 4, 28100 Novara (Italy)

    2011-07-30

    Highlights: > Effect of aromatic core on electronic properties in thiophene-X-thiophene trimers. > The lower the electron richness of X core, the deeper the HOMO level. > Different thiophene positions on X lead to kinked structure with lower conjugation. > The fluorene structure exhibits the lowest Stokes shift and the highest quantum yield. > The corresponding polymers obtained through three routes were studied. - Abstract: To achieve rationalization criteria for target-oriented molecular design of Th-X-Th (Th = thiophene) semiconductor building blocks, we have carried out an extensive investigation on the effects of the X core (X = fluorene, carbazole or phenothiazine) on the electronic properties and polymerization ability of Th-X-Th monomers and on the electronic and structural properties of the corresponding periodic conducting polymers -(Th-X-Th){sub n}-, obtained by electropolymerization and, for comparison's sake, by FeCl{sub 3}-catalyzed polymerization and/or Suzuki coupling. The effects of molecule bending and of solubilising bulky alkyl substituents have also been considered. The systematic, exhaustive template sequence combined with a rigorous, multitechnique investigation protocol affords a unique data library and a complete set of reliable interpretative/predictive guidelines.

  5. IRIS Toxicological Review of Tetrahydrofuran (THF) (External Review Draft)

    Science.gov (United States)

    EPA is conducting a peer review and public comment of the scientific basis supporting the human health hazard and dose-response assessment of tetrahydrofuran (THF) that when finalized will appear on the Integrated Risk Information System (IRIS) database.

  6. Anaerobic degradation of a mixture of MtBE, EtBE, TBA, and benzene under different redox conditions.

    Science.gov (United States)

    van der Waals, Marcelle J; Pijls, Charles; Sinke, Anja J C; Langenhoff, Alette A M; Smidt, Hauke; Gerritse, Jan

    2018-04-01

    The increasing use of biobased fuels and fuel additives can potentially change the typical fuel-related contamination in soil and groundwater. Anaerobic biotransformation of the biofuel additive ethyl tert-butyl ether (EtBE), as well as of methyl tert-butyl ether (MtBE), benzene, and tert-butyl alcohol (TBA, a possible oxygenate metabolite), was studied at an industrially contaminated site and in the laboratory. Analysis of groundwater samples indicated that in the field MtBE was degraded, yielding TBA as major product. In batch microcosms, MtBE was degraded under different conditions: unamended control, with medium without added electron acceptors, or with ferrihydrite or sulfate (with or without medium) as electron acceptor, respectively. Degradation of EtBE was not observed under any of these conditions tested. TBA was partially depleted in parallel with MtBE. Results of microcosm experiments with MtBE substrate analogues, i.e., syringate, vanillate, or ferulate, were in line with the hypothesis that the observed TBA degradation is a cometabolic process. Microcosms with ferulate, syringate, isopropanol, or diethyl ether showed EtBE depletion up to 86.5% of the initial concentration after 83 days. Benzene was degraded in the unamended controls, with medium without added electron acceptors and with ferrihydrite, sulfate, or chlorate as electron acceptor, respectively. In the presence of nitrate, benzene was only degraded after addition of an anaerobic benzene-degrading community. Nitrate and chlorate hindered MtBE, EtBE, and TBA degradation.

  7. Degradation of methyl-tert-butyl ether (MTBE)

    Czech Academy of Sciences Publication Activity Database

    Cajthaml, Tomáš; Baldrian, Petr; Stoychev, I.; Nerud, František

    2004-01-01

    Roč. 53, - (2004), s. 208-209 ISSN 0964-8305. [International Bideterioration and Biodegradation Symposium /12./. Praha, 14.07.2002-18.07.2002] R&D Projects: GA MŠk LN00B030 Institutional research plan: CEZ:AV0Z5020903 Keywords : mtbe Subject RIV: EE - Microbiology, Virology Impact factor: 0.835, year: 2004

  8. IS YOUR TBA COMING FROM BIODEGRADATION OF MTBE

    Science.gov (United States)

    MTBE (methyl tertiary butyl ether) is present at high concentrations in ground water at many sites where gasoline has been spilled from underground storage tanks. In addition, TBA (tertiary butyl alcohol) is also present at high concentrations in many of the same ground waters. ...

  9. Physiologically based pharmacokinetic rat model for methyl tertiary-butyl ether; comparison of selected dose metrics following various MTBE exposure scenarios used for toxicity and carcinogenicity evaluation

    International Nuclear Information System (INIS)

    Borghoff, Susan J.; Parkinson, Horace; Leavens, Teresa L.

    2010-01-01

    There are a number of cancer and toxicity studies that have been carried out to assess hazard from methyl tertiary-butyl ether (MTBE) exposure via inhalation and oral administration. MTBE has been detected in surface as well as ground water supplies which emphasized the need to assess the risk from exposure via drinking water contamination. This model can now be used to evaluate route-to-route extrapolation issues concerning MTBE exposures but also as a means of comparing potential dose metrics that may provide insight to differences in biological responses observed in rats following different routes of MTBE exposure. Recently an updated rat physiologically based pharmacokinetic (PBPK) model was published that relied on a description of MTBE and its metabolite tertiary-butyl alcohol (TBA) binding to α2u-globulin, a male rat-specific protein. This model was used to predict concentrations of MTBE and TBA in the kidney, a target tissue in the male rat. The objective of this study was to use this model to evaluate the dosimetry of MTBE and TBA in rats following different exposure scenarios, used to evaluate the toxicity and carcinogenicity of MTBE, and compare various dose metrics under these different conditions. Model simulations suggested that although inhalation and drinking water exposures show a similar pattern of MTBE and TBA exposure in the blood and kidney (i.e. concentration-time profiles), the total blood and kidney levels following exposure of MTBE to 7.5 mg/ml MTBE in the drinking water for 90 days is in the same range as administration of an oral dose of 1000 mg/kg MTBE. Evaluation of the dose metrics also supports that a high oral bolus dose (i.e. 1000 mg/kg MTBE) results in a greater percentage of the dose exhaled as MTBE with a lower percent metabolized to TBA as compared to dose of MTBE that is delivered over a longer period of time as in the case of drinking water.

  10. Copolymerization of Carbon–carbon Double-bond Monomer (Styrene with Cyclic Monomer (Tetrahydrofuran

    Directory of Open Access Journals (Sweden)

    Sari Fouad

    2012-12-01

    Full Text Available We reported in this work that the cationic copolymerization in one step takes place between carbon–carbon double-bond monomer styrene with cyclic monomer tetrahydrofuran. The comonomers studied belong to different families: vinylic and cyclic ether. The reaction is initiated with maghnite-H+ an acid exchanged montmorillonite as acid solid ecocatalyst. Maghnite-H+ is already used as catalyst for polymerization of many vinylic and heterocyclic monomers. The oxonium ion of tetrahydrofuran and carbonium ion of styrene propagated the reaction of copolymerization. The acetic anhydride is essential for the maintenance of the ring opening of tetrahydrofuran and the entry in copolymerization. The temperature was kept constant at 40°C in oil bath heating for 6 hours. A typical reaction product was analyzed by 1H-NMR, 13C-NMR and IR and the formation of the copolymer was confirmed. The reaction was proved by matched with analysis. The maghnite-H+ allowed us to obtain extremely pure copolymer in good yield by following a simples operational conditions. Copyright © 2012 by BCREC UNDIP. All rights reservedReceived: 29th October 2012; Revised: 29th November 2012; Accepted: 29th November 2012[How to Cite: S. Fouad, M.I. Ferrahi, M. Belbachir. (2012. Copolymerization of Carbon–carbon Double-bond Monomer (Styrene with Cyclic Monomer (Tetrahydrofuran. Bulletin of Chemical Reaction Engineering & Catalysis, 7(2: 165-171. (doi:10.9767/bcrec.7.2.4074.165-171][How to Link / DOI: http://dx.doi.org/10.9767/bcrec.7.2.4074.165-171 ] | View in 

  11. Toxicity of thiophenes from echinops transiliensis (Asteraceae) against aedes aegypti (Diptera: Culicidae) larvae

    Science.gov (United States)

    Six known thiophenes, 5-(3,4-diacetoxybut-1-ynyl)-2,2'-bithiophene (3), 2-(penta-1,3-diynyl)-5-(3,4-diacetoxybut-1-ynyl)thiophene (4), 5-(4-acetoxy-3-hydroxybut-1-ynyl)-2,2'-bithiophene (5), 2-(penta-1,3-diynyl)-5-(4-acetoxy-3-hydroxybut-1-ynyl)thiophene (6), 2-(penta-1,3-diynyl)-5-(3-acetoxy-4-hydr...

  12. The synthesis of pi-electron molecular rods with a thiophene or thieno[3,2-b]thiophene core unit and sulfur alligator clips

    Czech Academy of Sciences Publication Activity Database

    Seidler, A.; Svoboda, J.; Dekoj, Václav; Vacek Chocholoušová, Jana; Vacek, Jaroslav; Stará, Irena G.; Starý, Ivo

    2013-01-01

    Roč. 54, č. 22 (2013), s. 2795-2798 ISSN 0040-4039 R&D Projects: GA AV ČR IAA400550919 Grant - others:Rada Programu interní podpory projektů mezinárodní spolupráce AV ČR(CZ) M200550914 Institutional support: RVO:61388963 Keywords : molecular wires * thiophene OPE rods * thiophene OPV rods * UV spectra * HOMO-LUMO gaps Subject RIV: CC - Organic Chemistry Impact factor: 2.391, year: 2013

  13. Fenton-Driven Regeneration of MTBE-spent Granular Activated Carbon

    Science.gov (United States)

    Fenton-driven regeneration of Methyl tert-butyl ether (MTBE)-spent granular activated carbon (GAC) involves the combined, synergistic use of two treatment technologies: adsorption of organic chemicals onto activated carbon and Fenton-driven oxidation regeneration of the spent-GAC...

  14. IRIS Toxicological Review of Tetrahydrofuran (THF) (Interagency Science Discussion Draft)

    Science.gov (United States)

    EPA is releasing the draft report, Toxicological Review of Tetrahydrofuran, that was distributed to Federal agencies and White House Offices for comment during the Science Discussion step of the iris/process.htm">IRIS Assessment Development Proc...

  15. DETERMINING HOW VAPOR PHASE MTBE REACHES GROUND WATER

    Science.gov (United States)

    EPA Region 2 and ORD have funded a RARE project for FY 2005/2006 to evaluate the prospects that MTBE (and other fuel components) in vapors that escape from an underground storage tank (UST) can find its way to ground water produced by monitoring wells at a gasoline filling statio...

  16. Epigenetic and Transcriptional Modifications in Repetitive Elements in Petrol Station Workers Exposed to Benzene and MTBE

    Directory of Open Access Journals (Sweden)

    Federica Rota

    2018-04-01

    Full Text Available Benzene, a known human carcinogen, and methyl tert-butyl ether (MTBE, not classifiable as to its carcinogenicity, are fuel-related pollutants. This study investigated the effect of these chemicals on epigenetic and transcriptional alterations in DNA repetitive elements. In 89 petrol station workers and 90 non-occupationally exposed subjects the transcriptional activity of retrotransposons (LINE-1, Alu, the methylation on repeated-element DNA, and of H3K9 histone, were investigated in peripheral blood lymphocytes. Median work shift exposure to benzene and MTBE was 59 and 408 µg/m3 in petrol station workers, and 4 and 3.5 µg/m3, in controls. Urinary benzene (BEN-U, S-phenylmercapturic acid, and MTBE were significantly higher in workers than in controls, while trans,trans-muconic acid (tt-MA was comparable between the two groups. Increased BEN-U was associated with increased Alu-Y and Alu-J expression; moreover, increased tt-MA was associated with increased Alu-Y and Alu-J and LINE-1 (L1-5′UTR expression. Among repetitive element methylation, only L1-Pa5 was hypomethylated in petrol station workers compared to controls. While L1-Ta and Alu-YD6 methylation was not associated with benzene exposure, a negative association with urinary MTBE was observed. The methylation status of histone H3K9 was not associated with either benzene or MTBE exposure. Overall, these findings only partially support previous observations linking benzene exposure with global DNA hypomethylation.

  17. MTBE IN SITU BIODEGRADATION IN BIONETS USING ISOLITE, PM1, SLOW RELEASING OXYGEN AND AIR IN INDIAN COUNTRY

    Science.gov (United States)

    Methyl tert-Butyl Ether (MTBE), a gasoline additive, is a persistent, foul tasting chemical and more mobile in ground water than BTEX. Our objective was to determine if biologically active in situ Bionets could bioremediate MTBE. Seven Bionets, most containing 3 fractures each,...

  18. In vitro production of thiophenes using hairy root cultures of Tagetes ...

    African Journals Online (AJOL)

    Aghomotsegin

    2016-04-27

    Apr 27, 2016 ... Road, P. O. CIMAP, Lucknow 226015, India. 2Analytical ... Four types of thiophenes that accumulated in root cultures of Tagetes ... Thiophenes act as ... remaining stockpiles requires annual critical use .... hairy root lines were selected for further analysis. The .... Ambros PF, Matzke AJM, Matzke AM (1986).

  19. vinyltriphenylphosphonium salt-mediated preparation of thiophene ...

    African Journals Online (AJOL)

    Preferred Customer

    via thiophene-containing phosphorus ylides intermediates in fairly high yields. ... important reagents in synthetic organic chemistry [1-16], especially in the synthesis of .... reduced pressure and the viscous residue was purified by flash column ...

  20. Dynamic NMR studies of restricted arene rotation in the chromiu tricarbonyl thiophene and selenophene complexes

    Energy Technology Data Exchange (ETDEWEB)

    Sanger, Michael J. [Iowa State Univ., Ames, IA (United States)

    1994-05-27

    This thesis contains the results of organometallic studies of thiophene and selenophene coordination in transition metal complexes. Chromium tricarbonyl complexes of thiophene, selenophene, and their alkyl-substituted derivatives were prepared and variable-temperature 13C NMR spectra of these complexes were recorded in dimethyl ether. Bandshape analyses of these spectra yielded activation parameters for restricted rotation of the thiophene and selenophene ligands in these complexes. Extended Hueckel molecular orbital calculations (EHMO) of the free thiophene and selenophene ligands and selected chromium tricarbonyl thiophene complexes were performed to better explain the activation barriers of these complexes. The structure of Cr(CO)35-2,5-dimethylthiophene) was established by a single crystal X-ray diffraction study.

  1. Water quality and MTBE water pollution

    International Nuclear Information System (INIS)

    Buiatti, M.; Mascini, M.; Monanni, R.; Filipponi, M.; Piangoloni, A.; Mancini, G.

    2001-01-01

    The research project, here presented, was defined with the aim of evaluating the eventual presence of MTBE and the possible relative impact in water destined to human use; the territorial valence of the project was extended to the competence region n. 4 of the Tuscany water authority (AATO n. 4). University of Florence, ARPAT, AATO n. 4 and Nuove Acque SpA, in this role of manager for the integrated water cycle in the country, have productively contributed to the project [it

  2. Poly(methyl methacrylate) and thiophene-coated single-walled carbon nanotubes for volatile organic compound discrimination

    Science.gov (United States)

    Muangrat, Worawut; Chodjarusawad, Thanawee; Maolanon, Rungroj; Pratontep, Sirapat; Porntheeraphat, Supanit; Wongwiriyapan, Winadda

    2016-02-01

    Poly(methyl methacrylate) (PMMA) and thiophene-coated single-walled carbon nanotubes (SWNTs) were fabricated for use in volatile organic compound (VOC) detection. Pristine SWNTs were separately coated with PMMA (PMMA/SWNTs) and thiophene (thiophene/SWNTs) by spin-coating. Pristine SWNTs showed the highest response to methanol, while PMMA/SWNTs enabled 5.4-fold improved dichloromethane detection and thiophene/SWNTs enabled 1.4-fold improved acetone detection compared with pristine SWNTs. The sensor response of PMMA/SWNTs to dichloromethane and that of thiophene/SWNTs to acetone can be attributed to the Hildebrand solubility parameter (HSP). The more similar the HSP, the higher the sensor response. The sensor response of pristine SWNTs to methanol is related to the diffusion coefficient and molecular size. The relationships between the vapor concentration and sensor response of PMMA/SWNTs to dichloromethane and thiophene/SWNTs to acetone are based on Henry’s adsorption isotherm, while that of pristine SWNTs to methanol is based on the Henry-clustering model. Principal component analysis (PCA) results show that dichloromethane, acetone, and methanol were successfully discriminated.

  3. γ-aminobutyric acidA (GABAA) receptor regulates ERK1/2 phosphorylation in rat hippocampus in high doses of Methyl Tert-Butyl Ether (MTBE)-induced impairment of spatial memory

    International Nuclear Information System (INIS)

    Zheng Gang; Zhang Wenbin; Zhang Yun; Chen Yaoming; Liu Mingchao; Yao Ting; Yang Yanxia; Zhao Fang; Li Jingxia; Huang Chuanshu; Luo Wenjing; Chen Jingyuan

    2009-01-01

    Experimental and occupational exposure to Methyl Tert-Butyl Ether (MTBE) has been reported to induce neurotoxicological and neurobehavioral effects, such as headache, nausea, dizziness, and disorientation, etc. However, the molecular mechanisms involved in MTBE-induced neurotoxicity are still not well understood. In the present study, we investigated the effects of MTBE on spatial memory and the expression and function of GABA A receptor in the hippocampus. Our results demonstrated that intraventricular injection of MTBE impaired the performance of the rats in a Morris water maze task, and significantly increased the expression of GABA A receptor α1 subunit in the hippocampus. The phosphorylation of ERK1/2 decreased after the MTBE injection. Furthermore, the decreased ability of learning and the reduction of phosphorylated ERK1/2 level of the MTBE-treated rats was partly reversed by bicuculline injected 30 min before the training. These results suggested that MTBE exposure could result in impaired spatial memory. GABA A receptor may play an important role in the MTBE-induced impairment of learning and memory by regulating the phosphorylation of ERK in the hippocampus.

  4. Monitoring of the Gasoline Oxygenate MTBE and BTEX Compounds in Groundwater in Catalonia (Northeast Spain

    Directory of Open Access Journals (Sweden)

    J. Fraile

    2002-01-01

    Full Text Available Headspace (HS gas chromatography with flame ionisation detection (HS-GC-FID and purge and trap (P gas chromatography-mass spectrometry (P were used for the determination of methyl-tert-butyl ether (MTBE and benzene, toluene, and xylenes (BTEX in groundwater. In this work, we present the first data on the levels of MTBE and BTEX in different groundwater wells in the area of Catalonia (northeast Spain. This monitoring campaign corresponded to 28 groundwater wells that were located near petrol service stations, oil refinery storage tanks, and/or chemical industry at different locations of Catalonia during the period of 1998/1999. The levels of MTBE detected varied between 4—300 μg/l, but two sites had MTBE levels up to 3 and 13 mg/l. In many cases, the BTEX levels were below 1 μg/l, whereas 7 sites had levels varying from 19 μg/l up to 3 mg/l. Most of them were related to leakage from underground tanks in petrol service stations, while the remaining three corresponded respectively to chemical industrial pollution of undetermined origin and to a leak from high-ground petrol tanks in petrochemical refinery factories. The aquifers involved were constituted by detritus coarse materials, sands, and conglomerates. Piezometric levels were roughly comprised between 3 and 40 m, and permeability (K and transmissivity (T values were estimated from field measurements.

  5. Ternary (liquid + liquid) equilibria of {trifluorotris(perfluoroethyl)phosphate based ionic liquids + thiophene + heptane}

    International Nuclear Information System (INIS)

    Marciniak, Andrzej; Królikowski, Marek

    2012-01-01

    Highlights: ► Ternary (liquid + liquid) equilibria for 3 ionic liquid + thiophene + heptane systems. ► The influence of ionic liquid structure on phase diagrams is discussed. ► High selectivity for separation of heptane/thiophene is observed. - Abstract: Ternary (liquid + liquid) equilibria for three systems containing ionic liquids {(4-(2-methoxyethyl)-4-methylmorpholinium trifluorotris(perfluoroethyl)phosphate, 1-(2-methoxyethyl)-1-methylpiperidinium trifluorotris(perfluoroethyl)phosphate, 1-(2-methoxyethyl)-1-methylpyrrolidinium trifluorotris(perfluoroethyl)phosphate) + thiophene + heptane} have been determined at T = 298.15 K. All systems showed high solubility of thiophene in the ionic liquid and low solubility of heptane. The solute distribution coefficient and the selectivity were calculated for all systems. High values of selectivity were obtained. The experimental results have been correlated using NRTL model. The influence of ionic liquid structure on phase equilibria is discussed.

  6. Potential occurrence of MTBE and BTEX in groundwater resources of Amman-Zarqa basin, Jordan

    International Nuclear Information System (INIS)

    Al Kuisi, Mustafa; Saffarini, Ghazi; Yaseen, Najal; Alawi, Mahmoud

    2012-01-01

    This study investigates potential occurrence, distribution, and sources of the newly added gasoline oxygenate, methyl-tert-butyl ether (MTBE) and the petroleum derivatives benzene, toluene, ethylbenzene, and xylenes called collectively, BTEX, in Jordan's heavily populated Amman-Zarqa Basin (AZB). It presents the first data on the levels of MTBE and BTEX in the aquifers of this basin. One hundred and seventy-nine (179) groundwater wells were sampled near petrol service stations, oil refinery storage tanks, car wrecks, bus stations, and chemical industries at different locations in the basin. Headspace GC and purge and trap GC-MS were utilized to determine the target substances in the samples. Concentrations of BTEX varied between no-detection (minimum) for all of them to 6.6 μg/L (maximum) for ethylbenzene. MTBE was found in few samples but none has exceeded the regulated levels; its concentrations ranged between no-detection to 4.1 μg/L. However, though the contamination levels are very low they should be considered alarming. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  7. The formation of electronically excited fragments by the electron impact of furan and related five-membered heterocycles

    International Nuclear Information System (INIS)

    Tokue, Ikuo; Ikarashi, Masami; Takizawa, Sadachika; Ito, Yoshio

    1983-01-01

    In the wavelength region of 200-600 nm, photoemissions from electronically excited H, CH, C 2 , and CS (only from thiophene and tetrahydrothiophene) were observed when furan, tetrahydrofuran, thiophene, and tetrahydrothiophene were excited by electron impact (0-70 eV). Hydrogen atoms (n = 4) and CH(A 2 Δ) radicals were produced from these five-membered heterocycles via single collision excitations, while CS(A 1 PI) radicals from thiophene and tetrahydrothiophene were partly formed in secondary processes. The appearance potentials for the hydrogen Balmer β and the CH(A 2 Δ-X 2 PI) bands from these five-membered heterocycles are determined, and the dissociation processes forming H(n = 4) and CH(A) are discussed. (author)

  8. Effect of benzene, toluene, ethylbenzene, and p-xylene (BTEX) mixture on biodegradation of methyl tert-butyl ether (MTBE) and tert-butyl alcohol (TBA) by pure culture UC1.

    Science.gov (United States)

    Pruden, Amy; Suidan, Makram

    2004-08-01

    The effect of a BTEX mixture on the biodegradation of methyl tert-butyl ether (MTBE) and its degradation intermediate, tert-butyl alcohol (TBA) was investigated in the pure bacterial culture UC1, which has been identified to be a strain of the known MTBE-degrader PM1 based on greater than 99% 16S rDNA similarity. Several degradation studies were carried out on UC1 at three initial concentration levels of MTBE or TBA: 6-7; 15-17; and 40-45 mg/l, both with and without BTEX present cumulatively at about half of the MTBE or TBA molar mass in the system. The BTEX mixture was observed not to affect either the rate or the degradation lag period of MTBE or TBA degradation, except that the TBA degradation rate actually increased when BTEX was present initially in the highest concentration studies. When serving as the sole substrate, the MTBE degradation rate ranged from 48 +/- 1.2 to 200 +/- 7.0 mg(MTBE)/g(dw) h, and the TBA degradation rate from 140 +/- 18 to 530 +/- 70 mg(TBA)/g(dw) h. When present with BTEX, MTBE and TBA rates ranged from 46 +/- 2.2 to 210 +/- 14 and 170 +/- 28 to 780 +/- 43 mg(TBA)/g(dw) h, respectively. In studies where varying concentrations of TBA were present with 5 mg/l MTBE, both compounds were degraded simultaneously with no obvious preference for either substrate. In the highest concentration study of TBA with 5 mg/l MTBE, BTEX was also observed to increase the ultimate rate of TBA degradation. In addition to exploring the affect of BTEX, this study also provides general insight into the metabolism of MTBE and TBA by pure culture UC1.

  9. Production d'isobutène de haute pureté par décomposition du MTBE High-Purity Isobutene Production from Mtbe

    Directory of Open Access Journals (Sweden)

    Meunier P. B.

    2006-11-01

    Full Text Available La décomposition du MTBE en isobutène et méthanol s'accompagne de réactions secondaires (oligomérisation de l'isobutène, hydratation de l'isobutène, déshydratation du méthanol. Les différents types de catalyseurs utilisés, les mécanismes et les cinétiques suggérés, ainsi que les sites actifs et les espèces adsorbées proposés dans la littérature sont examinés dans le cas de la réaction principale, et des réactions secondaires. La formulation du catalyseur et la nature des sites actifs (Brönsted, Lewis ont une incidence particulière sur la réaction. Les données de la littérature portent essentiellement sur des catalyseurs de type résines présentant une acidité de Brönsted. Sur catalyseurs de type oxydes il apparaît que les sites acides de Lewis, catalysent la réaction principale, tandis que les réactions secondaires sont essentiellement dues à la présence d'acidité de Brönsted. Un contrôle de l'acidité des formulations catalytiques est nécessaire afin de minimiser les réactions secondaires, et de produire de l'isobutène très pur. Under suitable conditions, methyl-tert-butyl ether (MTBE is decomposed into isobutene (C4H8 and methanol (CH3OH. This decomposition is a reversible endothermic chemical reaction ((*** = 15. 6 kcal/mol in the gas phase. When this reaction is situated downstream from MTBE synthesis from a C4 cut, this results in the separation of the different isomers in this cut by a less costly method than the one now used, which consists of concentrated sulfuric-acid extraction. The isobutene obtained by MTBE decomposition is very pure and meets the specifications required for subsequent polymerization into butyl rubber or methyl methacrylate. The MTBE decomposition reaction is accompanied by secondary reactions such as the oligomerization of isobutene (mainly the formation of dimers, the dehydration of methanol into dimethylether, and the hydration of isobutene into tert-butyl alcohol. MTBE

  10. Preparation and characterization of Pd doped ceria–ZnO nanocomposite catalyst for methyl tert-butyl ether (MTBE) photodegradation

    International Nuclear Information System (INIS)

    Seddigi, Zaki S.; Bumajdad, Ali; Ansari, Shahid P.; Ahmed, Saleh A.; Danish, Ekram Y.; Yarkandi, Naeema H.; Ahmed, Shakeel

    2014-01-01

    Highlights: • Novel Pd supported ceria–ZnO photocatalysts were prepared with different amounts of palladium. • The photocatalytic activity of these catalysts was evaluated for degradation of MTBE in water. • Near complete removal of MTBE was achieved using 1% Pd doped ceria–ZnO catalyst and UV irradiation. • Highest rate constant was obtained in case of 1% Pd doped ceria–ZnO catalyst. • Shape and size of pores are important factors for high photoactivity of catalyst. -- Abstract: A series of binary oxide catalysts (ceria–ZnO) were prepared and doped with different amounts of palladium in the range of 0.5%–1.5%. The prepared catalysts were characterized by SEM, TEM, XRD and XPS, as well as by N 2 sorptiometry study. The XPS results confirmed the structure of the Pd CeO 2−x -ZnO. The photocatalytic activity of these catalysts was evaluated for degradation of MTBE in water. These photocatalyst efficiently degrade a 100 ppm aqueous solution of MTBE upon UV irradiation for 5 h in the presence of 100 mg of each of these photocatalysts. The removal of 99.6% of the MTBE was achieved with the ceria–ZnO catalyst doped with 1% Pd. In addition to the Pd loading, the N 2 sorptiometry study introduced other factors that might affect the catalytic efficiency is the catalyst average pore sizes. The photoreaction was determined to be a first order reaction

  11. Preparation and characterization of Pd doped ceria–ZnO nanocomposite catalyst for methyl tert-butyl ether (MTBE) photodegradation

    Energy Technology Data Exchange (ETDEWEB)

    Seddigi, Zaki S. [Chemistry Department, Umm Al-Qura University, Makkah (Saudi Arabia); Bumajdad, Ali [Chemistry Department, Faculty of Science, Kuwait University (Kuwait); Ansari, Shahid P. [Chemistry Department, Umm Al-Qura University, Makkah (Saudi Arabia); Ahmed, Saleh A., E-mail: saleh_63@hotmail.com [Chemistry Department, Umm Al-Qura University, Makkah (Saudi Arabia); Danish, Ekram Y. [Chemistry Department, King Abdulaziz University, Jeddah (Saudi Arabia); Yarkandi, Naeema H. [Chemistry Department, Umm Al-Qura University, Makkah (Saudi Arabia); Ahmed, Shakeel [Center for Refining and Petrochemicals, Research Institute, King Fahd University of Petroleum and Minerals, Dhahran 31261 (Saudi Arabia)

    2014-01-15

    Highlights: • Novel Pd supported ceria–ZnO photocatalysts were prepared with different amounts of palladium. • The photocatalytic activity of these catalysts was evaluated for degradation of MTBE in water. • Near complete removal of MTBE was achieved using 1% Pd doped ceria–ZnO catalyst and UV irradiation. • Highest rate constant was obtained in case of 1% Pd doped ceria–ZnO catalyst. • Shape and size of pores are important factors for high photoactivity of catalyst. -- Abstract: A series of binary oxide catalysts (ceria–ZnO) were prepared and doped with different amounts of palladium in the range of 0.5%–1.5%. The prepared catalysts were characterized by SEM, TEM, XRD and XPS, as well as by N{sub 2} sorptiometry study. The XPS results confirmed the structure of the Pd CeO{sub 2−x}-ZnO. The photocatalytic activity of these catalysts was evaluated for degradation of MTBE in water. These photocatalyst efficiently degrade a 100 ppm aqueous solution of MTBE upon UV irradiation for 5 h in the presence of 100 mg of each of these photocatalysts. The removal of 99.6% of the MTBE was achieved with the ceria–ZnO catalyst doped with 1% Pd. In addition to the Pd loading, the N{sub 2} sorptiometry study introduced other factors that might affect the catalytic efficiency is the catalyst average pore sizes. The photoreaction was determined to be a first order reaction.

  12. Electronic structures of spinterface for thiophene molecule adsorbed at Co, Fe, and Ni electrode: First principles calculations

    Energy Technology Data Exchange (ETDEWEB)

    Cai, Linlin; Tian, Yanli; Yuan, Xiaobo; Hu, Guichao; Ren, Junfeng, E-mail: renjf@sdnu.edu.cn

    2016-12-15

    Highlights: • Thiophene molecule could be spin polarized when adsorbed at Co(001), Fe(100), and Ni(111) surfaces. • The biggest spin polarization will be obtained when the thiophene molecule adsorbed at the Fe(100) surface. • The spin polarization is originated from the interfacial orbital hybridizations between the 3d orbital of ferromagnetic electrodes and the 2p orbital of the thiophene molecule. - Abstract: First principles calculations are adopted to study the spin polarization properties of thiophene molecule which adsorbed at the Co, Fe, and Ni electrode surfaces. The density of states, spin-polarized density distributions as well as the differential charge density distributions are obtained. It is found that the p orbital of the thiophene molecule will interact with the d orbital of the ferromagnetic electrodes, which will generate new spin coupling states and lead to obvious spin polarization in the thiophene molecule. Different electrodes induce different spin polarization properties, and in which the Fe electrode will bring the biggest spin polarization of the thiophene molecule. People can selectively and efficiently inject spin polarized electrons into molecules by choosing suitable ferromagnetic electrodes in organic spintronic devices.

  13. Metal-molecular interface of sulfur-containing amino acid and thiophene on gold surface

    International Nuclear Information System (INIS)

    Honda, M; Baba, Y; Hirao, N; Sekiguchi, T

    2008-01-01

    Chemical-bonding states of metal-molecular interface have been investigated for L-cysteine and thiophene on gold by x-ray photoelectron spectroscopy (XPS) and near edge x-ray adsorption fine structure (NEXAFS). A remarkable difference in Au-S bonding states was found between L-cysteine and thiophene. For mono-layered L-cysteine on gold, the binding energy of S 1s in XPS and the resonance energy at the S K-edge in NEXAFS are higher by 8-9 eV than those for multi-layered film (molecular L-cysteine). In contrast, the S K-edge resonance energy for mono-layered thiophene on gold was 2475.0 eV, which is the same as that for molecular L-cysteine. In S 1s XPS for mono-layered thiophene, two peaks were observed. The higher binging-energy and more intense peak at 2473.4 eV are identified as gold sulfide. The binding energy of smaller peak, whose intensity is less than 1/3 of the higher binding energy peak, is 2472.2 eV, which is the same as that for molecular thiophene. These observations indicate that Au-S interface behavior shows characteristic chemical bond only for the Au-S interface of L-cysteine monolayer on gold substrate

  14. TBA IN GROUND WATER FROM THE NATURAL BIODEGRADATION OF MTBE

    Science.gov (United States)

    At many UST spills, the concentrations of TBA in ground water are much higher than would be expected from the presence of TBA in the gasoline originally spilled. The ratio of concentrations of TBA to concentrations of MTBE in monitoring wells at gasoline spill sites was compared ...

  15. MTBE BIODEGRADATION IN A GRAVITY FLOW, HIGH-BIOMASS RETAINING BIOREACTOR

    Science.gov (United States)

    The aerobic biodegradation of methyl tert-butyl ether (MtBE), a widely used fuel oxygenate, was investigated using a pilot-scale biomass-retaining bioreactor called a Biomass Concentrator Reactor (BCR). The reactor was operated for a year at a flow rate of 2500 L/d on Ci...

  16. MTBE BIOREMEDIATION WITH BIONETS CONTAINING ISOLITE, PMI, SOS ON AIR

    Science.gov (United States)

    Methyl tert-Butyl Ether (MTBE), a gasoline additive, is a persistent and foul tasting contaminant that is more mobile in ground water than BTEX. It is turning up at many American crossroads. This study's objective was to determine if biologically active in situ Bionets could bior...

  17. Cross sections for ionization of tetrahydrofuran by protons at energies between 300 and 3000 keV

    Science.gov (United States)

    Wang, Mingjie; Rudek, Benedikt; Bennett, Daniel; de Vera, Pablo; Bug, Marion; Buhr, Ticia; Baek, Woon Yong; Hilgers, Gerhard; Rabus, Hans

    2016-05-01

    Double-differential cross sections for ionization of tetrahydrofuran by protons with energies from 300 to 3000 keV were measured at the Physikalisch-Technische Bundesanstalt ion accelerator facility. The electrons emitted at angles between 15∘ and 150∘ relative to the ion-beam direction were detected with an electrostatic hemispherical electron spectrometer. Single-differential and total ionization cross sections have been derived by integration. The experimental results are compared to the semiempirical Hansen-Kocbach-Stolterfoht model as well as to the recently reported method based on the dielectric formalism. The comparison to the latter showed good agreement with experimental data in a broad range of emission angles and energies of secondary electrons. The scaling property of ionization cross sections for tetrahydrofuran was also investigated. Compared to molecules of different size, the ionization cross sections of tetrahydrofuran were found to scale with the number of valence electrons at large impact parameters.

  18. Solidification treatment of thiophene and BTEX contaminated soils

    International Nuclear Information System (INIS)

    Zarlinski, S.J.; Kingham, N.W.; Blevins, J.

    1995-01-01

    Contamination at the McColl Superfund Site, located in Fullerton, California, is due to the disposal, in pits, of spent sulfuric acid sludge from the production of aviation fuel. A treatability study was performed to evaluate the electiveness of in situ solidification treatment of materials contaminated with high concentrations of benzene, toluene, ethylbenzene, and xylenes (BTEX), as well as thiophene and other organic compounds. The contaminated materials were extremely acidic (pH<1) and had high organic and sulfur contents of greater than 70 percent and 10 percent, respectively. A total of 150 mixtures were screened to evaluate the effectiveness of 15 reagents. Based on the preliminary screening results, six mixtures were selected as being the most effective at treating the contaminated materials. Comprehensive evaluations of the candidate mixtures included (1) quantitative glovebag volatilization studies, (2) chemical characterization of the treated materials, (3) strength characterizations at multiple cure times of up to 60 days, (4) emissions monitoring of the treated materials at cure times of 7 and 14 days, and (5) the evaluation of oxidation reagents for treatment of the thiophene contamination. The treatability study demonstrated that solidification treatment is an effective alternative for remediation of the thiophene and BTEX contaminated materials

  19. Comprehensive and Facile Synthesis of Some Functionalized Bis-Heterocyclic Compounds Containing a Thieno[2,3-b]thiophene Motif

    Science.gov (United States)

    Mabkhot, Yahia N.; Barakat, Assem; Al-Majid, Abdullah M.; Alshahrani, Saeed A.

    2012-01-01

    A comprehensive and facile method for the synthesis of new functionalized bis-heterocyclic compounds containing a thieno[2,3-b]thiophene motif is described. The hitherto unknown bis-pyrazolothieno[2,3-b]thiophene derivatives 2a–c, bis-pyridazin othieno[2,3-b]thiophene derivatives 4, bis-pyridinothieno[2,3-b]thiophene derivatives 6a,b, and to an analogous bis-pyridinothieno[2,3-b]thiophene nitrile derivatives 7 are obtained. Additionally, the novel bis-pyradazinonothieno[2,3-b]thiophene derivatives 9, and nicotinic acid derivatives 10, 11 are obtained via bis-dienamide 8. The structures of all newly synthesized compounds have been elucidated by 1H, 13C NMR, GCMS, and IR spectrometry. These compounds represent a new class of sulfur and Nitrogen containing heterocycles that should also be of interest as new materials. PMID:22408452

  20. An experimental and theoretical kinetic study of the reaction of OH radicals with tetrahydrofuran

    KAUST Repository

    Giri, Binod

    2016-06-24

    Tetrahydrofuran (CHO, THF) and its alkylated derivatives of the cyclic ether family are considered to be promising future biofuels. They appear as important intermediates during the low-temperature oxidation of conventional hydrocarbon fuels and of heavy biofuels such as long-chain fatty acid methyl esters. The reaction of tetrahydrofuran with OH radicals was investigated in a shock tube, over a temperature range of 800-1340 K and at pressures near 1.5 bar. Hydroxyl radicals were generated by the rapid thermal decomposition of tert-butyl hydroperoxide, and a UV laser absorption technique was used to monitor the mole fraction of OH radicals. High-level CCSD(T)/cc-pV(D,T)Z//MP2/aug-cc-pVDZ quantum chemical calculations were performed to explore the chemistry of the THF+OH reaction system. Our calculations reveal that the THF+OH (R1) reaction proceeds via either direct or indirect H-abstraction from various sites, leading to the formation of tetrahydrofuran-2-yl (THF-R2) or tetrahydrofuran-3-yl (THF-R3) radicals and water. Theoretical kinetic analysis revealed that both channels are important under conditions relevant to combustion. To our knowledge, this is the first direct experimental and theoretical kinetic study of the reaction of tetrahydrofuran with OH radicals at high temperatures. The following theoretical rate expressions (in units of cmmols) are recommended for combustion modeling in the temperature range 800-1350 K: . k1(T)=4.11×1040.16em0ex(TK)2.69exp(1316.80.16em0exKT)2.em0ex0.16em0ex(THF+OH→Products) . k2(T)=6.930.16em0ex×10110.16em0ex(TK)0.41exp(-106.80.16em0exKT)2.em0ex0.16em0ex(THF+OH→THF-R20.16em0ex+H2O) . k3(T)=4.120.16em0ex×1030.16em0ex(TK)3.02exp(456.90.16em0exKT)2.em0ex0.16em0ex(THF+OH→THF-R30.16em0ex+H2O) . .

  1. REMOVAL OF MTBE FROM WATER BY MEMBRANE-BASED PERVAPORATION TECHNOLOGY

    Science.gov (United States)

    The ability of pervaporation to remove methyl t-butyl ether (MTBE) from water has been evaluated at both bench- and pilot-scales. In pervaporation, a liquid stream containing two or more components is placed in contact with one side of a non-porous polymeric membrane while a vac...

  2. Visible-light-induced photocatalysis of low-level methyl-tertiary butyl ether (MTBE) and trichloroethylene (TCE) using element-doped titanium dioxide

    Energy Technology Data Exchange (ETDEWEB)

    Jo, Wan-Kuen; Yang, Chang-Hee [Department of Environmental Engineering, Kyungpook National University, Sankeokdong, Bukgu, Daegu 702-701 (Korea)

    2010-04-15

    While the photocatalytic degradation of various volatile organic compounds in conjunction with UV light has been widely reported, visible-light-induced photocatalytic degradation of low-levels of the pollutants MTBE and TCE, which have been linked to potential adverse health effects, is rarely reported. The present study examined whether visible-light-activated S- or N-doped TiO{sub 2} photocatalytic technology can be used to control indoor concentrations of MTBE and TCE. This study consists of the characterization of the doped TiO{sub 2} powders, as well as an investigation of their photocatalytic activities. In regards to both powders, a shift of the absorbance spectrum towards the visible light region was observed. An activity test suggested that these photocatalysts exhibited reasonably high degradation efficiencies towards MTBE and TCE under visible light irradiation. The degradation efficiencies of MTBE and TCE by S- and N-doped photocatalysts exceeded 75 and 80%, respectively, at input concentrations (IC) of 0.1 ppm. Degradation efficiency was dependent on both IC and relative humidity. TCE could enhance the degradation efficiency of MTBE even under visible-light irradiation. The estimated mineralization efficiencies (MEs) were comparable to those of previous studies conducted with UV/TiO{sub 2} systems. Similar to the relative degradation efficiencies, the ME of TCE was higher in comparison to that of MTBE. The CO production measured during the photocatalytic processes represented a negligible addition to indoor CO levels. These results suggest that visible-light-activated S- and N-doped TiO{sub 2} photocatalysts may prove a useful tool in the effort to improve indoor air quality. (author)

  3. Alkylated indacenodithieno[3,2-b]thiophene-based all donor ladder-type conjugated polymers for organic thin film transistors

    KAUST Repository

    Lu, Rimei; Han, Yang; Zhang, Weimin; Zhu, Xiuxiu; Fei, Zhuping; Hodsden, Thomas; Anthopoulos, Thomas D.; Heeney, Martin

    2018-01-01

    We report the synthesis of a series of indacenodithieno[3,2-b]thiophene (IDTT) based conjugated polymers by copolymerization with three different electron rich co-monomers [thiophene (T), thieno[3,2-b]thiophene (TT) and dithieno[3,2-b:2',3'-d

  4. Crystal structures of functional building blocks derived from bis(benzo[b]thiophen-2-yl)methane.

    Science.gov (United States)

    Katzsch, Felix; Gruber, Tobias; Weber, Edwin

    2016-09-01

    The syntheses of three bis(benzo[b]thiophen-2-yl)methane derivatives, namely bis(benzo[b]thiophen-2-yl)methanone, C17H10OS2, (I), 1,1-bis(benzo[b]thiophen-2-yl)-3-(trimethylsilyl)prop-2-yn-1-ol, C22H20OS2Si, (II), and 1,1-bis(benzo[b]thiophen-2-yl)prop-2-yn-1-ol, C19H12OS2, (III), are described and their crystal structures discussed comparatively. The conformation of ketone (I) and the respective analogues are rather similar for most of the compounds compared. This is true for the interplanar angles, the Caryl-Cbridge-Caryl angles and the dihedral angles. The best resemblance is found for a bioisotere of (I), viz. 2,2'-dinaphthyl ketone, (VII). By way of interest, the crystal packings also reveal similarities between (I) and (VII). In (I), the edge-to-face interactions seen between two napthyl residues in (VII) are substituted by S...π contacts between the benzo[b]thiophen-2-yl units in (I). In the structures of the bis(benzo[b]thiophen-2-yl)methanols, i.e. (II) and (III), the interplanar angles are also quite similar compared with analogues and related active pharmaceutical ingredients (APIs) containing the dithiophen-2-ylmethane scaffold, though the dihedral angles show a larger variability and produce unsymmetrical molecules.

  5. Particle Size Effects on Fenton Regeneration of MTBE-spent Activated Carbon

    Science.gov (United States)

    Fenton-driven regeneration of spent granular activated carbon (GAC) is a developing technology that may reduce water treatment costs. In this study, the effect of GAC particle size on Fenton-driven oxidation of methyl tert-butyl ether (MTBE)-spent GAC was evaluated. The GAC was...

  6. Organosulfur chemistry on W(211) surfaces. 2. A comparison of benzene, thiophene, and tetrahydrothiophene

    International Nuclear Information System (INIS)

    Preston, R.E.; Benziger, J.B.

    1985-01-01

    The interactions of benzene, thiophene, and tetrahydrothiophene with clean, oxidized, and sulfided W(211) surfaces were studied with LEED, AES, and temperature programmed reaction. Benzene and thiophene appear to absorb as bases making π-bonds to the surface. Benzene decomposed to yield adsorbed carbon and hydrogen. Thiophene appeared to undergo electrophilic attack at the 2-position forming a carbon bound surface intermediate. This surface intermediate was desulfurized and the resulting hydrocarbon surface intermediate underwent C-C bond scission forming C 3 hydrocarbons as the dominate desorption product. The electrophilic attack at the 2-position was shown by methyl group elimination from 2,5-dimethylthiophene. Adsorbed oxygen and sulfur enhanced the adsorption of benzene and thiophene by making the surface more acidic. Tetrahydrothiophene (THT) appear to adsorb as a base, forming a bond between the S(3p) electrons and the surface. Desulfurization of adsorbed THT led to C 4 hydrocarbons as the dominate desorption product. Adsorbed oxygen and sulfur inhibited reaction of THT. These results suggest that the surface reactivity and subsequent desulfurization of thiophene is controlled by electrophilic attack on the aromatic ring, and the ensuing reduction of resonance stabilization facilitates sulfur removal. 41 references, 8 figures, 4 tables

  7. Thermodynamic study of 2-methyl-tetrahydrofuran with isomeric chlorobutanes

    International Nuclear Information System (INIS)

    Aldea, M. Eugenia; Martin, Santiago; Artigas, Hector; Lopez, Maria C.; Lafuente, Carlos

    2005-01-01

    Excess molar volumes, V E , isentropic compressibility deviations, Δκ S , and excess molar enthalpies, H E , for the binary mixtures 2-methyl-tetrahydrofuran with 1-chlorobutane, 2-chlorobutane, 2-methyl-1-chloropropane and 2-methyl-2-chloropropane have been determined at temperatures 298.15 and 313.15 K, excess molar enthalpies were only measured at 298.15 K. We have applied the Prigogine-Flory-Patterson (PFP) theory to these mixtures at 298.15 K

  8. BTEX MTBE BIOREMEDIATION: BIONETS CONTAINING ISOLITE, PM1, SOLID OXYGEN SOURCE

    Science.gov (United States)

    Methyl tert-Butyl Ether (MTBE), a gasoline additive, is a persistent and foul tasting contaminate that is more mobile in ground water than BTEX . It, along with BTEX, is turning up at many American crossroads. This study's objective was to determine if biologically active in sit...

  9. Pro-aromatic Bisphenaleno-thieno[3,2-b]thiophene versus Anti-aromatic Bisindeno-thieno[3,2-b]thiophene: Different Ground- state Properties and Applications for Field-effect Transistors

    KAUST Repository

    Shi, Xueliang

    2015-07-06

    A pro-aromatic bisphenaleno-thieno[3,2-b]thiophene (BPT-TIPS) was synthesized and compared with an anti-aromatic bisindeno-thieno[3,2-b]thiophene (S2-TIPS). BPT-TIPS showed larger diradical character, stronger absorption, longer excited state lifetime and better redox amphotericity than S2-TIPS. X-ray crystallographic analysis of BPT-TIPS disclosed an ordered 3D packing via close π-π interactions and field-effect hole mobility of 0.26 cm2V-1s-1 was obtained.

  10. Pro-aromatic Bisphenaleno-thieno[3,2-b]thiophene versus Anti-aromatic Bisindeno-thieno[3,2-b]thiophene: Different Ground- state Properties and Applications for Field-effect Transistors

    KAUST Repository

    Shi, Xueliang; Lee, Sangsu; Son, Minjung; Zheng, Bin; Chang, Jingjing; Jing, Linzhi; Huang, Kuo-Wei; Kim, Dongho; Chi, Chunyan

    2015-01-01

    A pro-aromatic bisphenaleno-thieno[3,2-b]thiophene (BPT-TIPS) was synthesized and compared with an anti-aromatic bisindeno-thieno[3,2-b]thiophene (S2-TIPS). BPT-TIPS showed larger diradical character, stronger absorption, longer excited state lifetime and better redox amphotericity than S2-TIPS. X-ray crystallographic analysis of BPT-TIPS disclosed an ordered 3D packing via close π-π interactions and field-effect hole mobility of 0.26 cm2V-1s-1 was obtained.

  11. Peculiarities of spin polarization inversion at a thiophene/cobalt interface

    KAUST Repository

    Wang, Xuhui

    2013-03-20

    We perform ab initio calculations to investigate the spin polarization at the interface between a thiophene molecule and cobalt substrate. We find that the reduced symmetry in the presence of a sulfur atom (in the thiophene molecule) leads to a strong spatial dependence of the spin polarization of the molecule. The two carbon atoms far from the sulfur acquire a polarization opposite to that of the substrate, while the carbon atoms bonded directly to sulfur possess the same polarization as the substrate. We determine the origin of this peculiar spin interface property as well as its impact on the spin transport.

  12. Fine tuning the HOMO energy levels of polythieno[3,4-b]thiophene derivatives by incorporation of thiophene-3,4-dicarboxylate moiety for photovoltaic applications

    DEFF Research Database (Denmark)

    Hu, Xiao-Lian; Zuo, Li-Jian; Nan, Ya-Xiong

    2012-01-01

    To lower the HOMO (highest occupied molecular orbital) energy level of polythieno[3,4-b]thiophene (∼−4.5eV), a series of ester-functionalized polythieno[3,4-b]thiophene derivatives (P1–P3) were designed and synthesized by Stille cross coupling reaction. The resulting copolymers exhibited broad...... voltage (Voc) of 0.54V, a short circuit current density (Isc) of 3.3mA/cm2, a fill factor (FF) of 0.57, and a power conversion efficiency (PCE) of 1.02%. A high Voc up to 0.71V was achieved in the solar cell based on a P3:PCBM blend....

  13. Poly thiophene hydrophobic and hydrophilic compounds, silver and iodine synthesized by plasma

    International Nuclear Information System (INIS)

    Palacios, J.C.; Chavez, J.A.; Olayo, M.G.; Cruz, G.J.

    2007-01-01

    Compounds in thin films of poly thiophene with silver and poly thiophene doped with iodine and silver using splendor discharges were synthesized. It is studied the wettability of the compounds and its transport properties. It was found that the compounds can modify their hydrophilic to hydrophobic behavior controlling their surface ruggedness and the metallic content. The doped with iodine plays a fundamental paper in the modification of the ruggedness of the compounds. (Author)

  14. Environmental analysis of the life cycle emissions of 2-methyl tetrahydrofuran solvent manufactured from renewable resources.

    Science.gov (United States)

    Slater, C Stewart; Savelski, Mariano J; Hitchcock, David; Cavanagh, Eduardo J

    2016-01-01

    An environmental analysis has been conducted to determine the cradle to gate life cycle emissions to manufacture the green solvent, 2-methyl tetrahydrofuran. The solvent is considered a greener chemical since it can be manufactured from renewable resources with a lower life cycle footprint. Analyses have been performed using different methods to show greenness in both its production and industrial use. This solvent can potentially be substituted for other ether and chlorinated solvents commonly used in organometallic and biphasic reactions steps in pharmaceutical and fine chemical syntheses. The 2-methyl tetrahydrofuran made from renewable agricultural by-products is marketed by Penn A Kem under the name ecoMeTHF™. The starting material, 2-furfuraldehyde (furfural), is produced from corn cob waste by converting the available pentosans by acid hydrolysis. An evaluation of each step in the process was necessary to determine the overall life cycle and specific CO2 emissions for each raw material/intermediate produced. Allocation of credits for CO2 from the incineration of solvents made from renewable feedstocks significantly reduced the overall carbon footprint. Using this approach, the overall life cycle emissions for production of 1 kg of ecoMeTHF™ were determined to be 0.191 kg, including 0.150 kg of CO2. Life cycle emissions generated from raw material manufacture represents the majority of the overall environmental impact. Our evaluation shows that using 2-methyl tetrahydrofuran in an industrial scenario results in a 97% reduction in emissions, when compared to typically used solvents such as tetrahydrofuran, made through a conventional chemical route.

  15. An ex situ evaluation of TBA- and MTBE-baited bio-traps.

    Science.gov (United States)

    North, Katharine P; Mackay, Douglas M; Annable, Michael D; Sublette, Kerry L; Davis, Greg; Holland, Reef B; Petersen, Daniel; Scow, Kate M

    2012-08-01

    Aquifer microbial communities can be investigated using Bio-traps(®) ("bio-traps"), passive samplers containing Bio-Sep(®) beads ("bio-beads") that are deployed in monitoring wells to be colonized by bacteria delivered via groundwater flow through the well. When bio-beads are "baited" with organic contaminants enriched in (13)C, stable isotope probing allows assessment of the composition and activity of the microbial community. This study used an ex situ system fed by groundwater continuously extracted from an adjacent monitoring well within an experimentally-created aerobic zone treating a tert-butyl alcohol (TBA) plume. The goal was to evaluate aspects of bio-trap performance that cannot be studied quantitatively in situ. The measured groundwater flow through a bio-trap housing suggests that such traps might typically "sample" about 1.8 L per month. The desorption of TBA or methyl tert-butyl ether (MTBE) bait from bio-traps during a typical deployment duration of 6 weeks was approximately 90% and 45%, respectively, of the total initial bait load, with initially high rate of mass loss that decreased markedly after a few days. The concentration of TBA in groundwater flowing by the TBA-baited bio-beads was estimated to be as high as 3400 mg/L during the first few days, which would be expected to inhibit growth of TBA-degrading microbes. Initial inhibition was also implied for the MTBE-baited bio-trap, but at lower concentrations and for a shorter time. After a few days, concentrations in groundwater flowing through the bio-traps dropped below inhibitory concentrations but remained 4-5 orders of magnitude higher than TBA or MTBE concentrations within the aquifer at the experimental site. Desorption from the bio-beads during ex situ deployment occurred at first as predicted by prior sorption analyses of bio-beads but with apparent hysteresis thereafter, possibly due to mass transfer limitations caused by colonizing microbes. These results suggest that TBA- or MTBE

  16. An ex situ evaluation of TBA- and MTBE-baited bio-traps

    Science.gov (United States)

    North, Katharine P.; Mackay, Douglas M.; Annable, Michael D.; Sublette, Kerry L.; Davis, Greg; Holland, Reef B.; Petersen, Daniel; Scow, Kate M.

    2013-01-01

    Aquifer microbial communities can be investigated using Bio-traps® (“bio-traps”), passive samplers containing Bio-Sep® beads (“bio-beads”) that are deployed in monitoring wells to be colonized by bacteria delivered via groundwater flow through the well. When bio-beads are “baited” with organic contaminants enriched in 13C, stable isotope probing allows assessment of the composition and activity of the microbial community. This study used an ex situ system fed by groundwater continuously extracted from an adjacent monitoring well within an experimentally-created aerobic zone treating a tert-butyl alcohol (TBA) plume. The goal was to evaluate aspects of bio-trap performance that cannot be studied quantitatively in situ. The measured groundwater flow through a bio-trap housing suggests that such traps might typically “sample” about 1.8 L per month. The desorption of TBA or methyl tert-butyl ether (MTBE) bait from bio-traps during a typical deployment duration of 6 weeks was approximately 90% and 45%, respectively, of the total initial bait load, with initially high rate of mass loss that decreased markedly after a few days. The concentration of TBA in groundwater flowing by the TBA-baited bio-beads was estimated to be as high as 3400 mg/L during the first few days, which would be expected to inhibit growth of TBA-degrading microbes. Initial inhibition was also implied for the MTBE-baited bio-trap, but at lower concentrations and for a shorter time. After a few days, concentrations in groundwater flowing through the bio-traps dropped below inhibitory concentrations but remained 4–5 orders of magnitude higher than TBA or MTBE concentrations within the aquifer at the experimental site. Desorption from the bio-beads during ex situ deployment occurred at first as predicted by prior sorption analyses of bio-beads but with apparent hysteresis thereafter, possibly due to mass transfer limitations caused by colonizing microbes. These results suggest that

  17. ESTCP Cost and Performance Report. In-Situ Bioremediation of MTBE in Ground Water

    National Research Council Canada - National Science Library

    Miller, Karen

    2003-01-01

    ... (methyl-tert-butyl-ether) and other dissolved gasoline components. It was implemented at the Naval Base Ventura County, Port Hueneme, CA to prevent further contamination of ground water by MTBE leaching from gasoline contaminated soils...

  18. Sludge Recycle of Wastewater Treatment Plant via its Application as Powdered Activated Carbon for Removal of Methyl Tertiary-Butyl Ether (MTBE from Aqueous Solutions

    Directory of Open Access Journals (Sweden)

    MR Zare

    2016-05-01

    Full Text Available Introduction: Nowadays, application of MTBE due to its physical and chemical characteristics including high solubility in water has been increased, resulting in its release into the water resources. On other hand, waste activated sludge derived from municipal wastewater treatment plant (MWTP contains high amount of carbon. Therefore, this study aimed to provide the activated carbon via sludge of MWTP as well as to evaluate its efficiency for MTBE removal. Methods: The effect of some parameters such as kind of activator, pH (2-10, contact time (0-240min, adsorbent dose (2-6g/L and initial concentration of MTBE (20-70mg/L was investigated on MTBE adsorption via activated carbon, after preparation of coal from wastewater sludge and activation of this coal via 3 molar solution of H2PO4,  and KOH as well as 5 molar solution of ZnCl2. MTBE concentration in solution was determined via Gas-Chromatography instrument. The obtained experimental data were modeled by adsorption model of Freundlich and Langmuir. Results: The maximum adsorbed MTBE per gram of activated carbon was obtained when the ZnCL2 was used as an activator; however, there was no statistically significant difference among different activators. In addition, maximum removal efficiency (about 50% was obtained in acidic pH of 4, 6g/L of activated carbon and 20mg/L of MTBE concentration. Results of adsorption isotherm showed that Freundlich adsorption model had a better compliance with the experimental data. Conclusion: Regarding the problems associated with sludge disposal of wastewater treatment plant, recycling of this sludge, as an adsorbent, can eliminate most of these problems. As a result, the economical features with respect to industrial scale application and the efficiency of this substance in removal of other pollutants are recommended to be investigated.

  19. 2-(4-Methylpiperazin-1-yl-4-phenyl-6-(thiophen-2-yl-pyridine-3-carbonitrile

    Directory of Open Access Journals (Sweden)

    Nawal Mishriky

    2013-02-01

    Full Text Available 2-(4-Methylpiperazin-1-yl-4-phenyl-6-(thiophen-2-yl-pyridine-3-carbonitrile (4 was synthesized via nucleophilic substitution reaction of 1-methylpiperazine with 2-bromo analogue 3. The latter was obtained through bromination (Br2/AcOH of 2-[3-oxo-1-phenyl-3-(thiophen-2-ylpropyl]malononitrile (2.

  20. Thiophene-bithiazole based metal-free dye as DSSC sensitizer ...

    Indian Academy of Sciences (India)

    aPhotosciences and Photonics Group, Chemical Sciences and Technology Division, CSIR-National. Institute ... Dye sensitized solar cell; Thiophenes; Bithiazoles, co-adsorbents; photoconversion .... After cooling, transparent TiO2 paste of par-.

  1. Feasibility and parametric study of tetrahydrofuran dehydration using reactive distillation with low energy requirement

    International Nuclear Information System (INIS)

    Tavan, Yadollah

    2014-01-01

    A new configuration of a RD (reactive distillation) process is investigated to break the THF (tetrahydrofuran)/water azeotrope using Hysys process software. The main module is a column system containing the reaction of EO (ethylene oxide) with water, in which top and bottom streams are the desired products, THF and EG (ethylene glycol), respectively. This contribution explores feasibility of using the reaction in the RD column and also describes the influence of reflux ratio, reaction trays, operating pressure and feed–inlet locations of the RD column in simulation environment. The results show that high purities of EG and THF are simultaneously obtained by this novel technique leading to more profits of the RD process. The optimal design of the RD process is obtained by minimizing the energy demand and the optimum number of reactive trays is found to be 10. Furthermore, minimum energy demand is observed when the column operates at atmospheric pressure with reflux ratio of 1.25. Particularly, it is found that the optimal reboiler duty per unit THF produced is reduced from 32 to 3.7% for the new process as compared to the conventional one, while both schemes predict similar outputs. - Highlights: • A reactive distillation column is proposed to produce pure tetrahydrofuran. • The tetrahydrofuran-water azeotrope is broken using reactive distillation column. • High energy saving (88%) is found for the reactive distillation process

  2. [Disulfanediylbis(ferrocenylthiophosphinato-κ2O,O]titanocene tetrahydrofuran trisolvate

    Directory of Open Access Journals (Sweden)

    Mehmet Karakus

    2012-04-01

    Full Text Available The title compound, [Fe2Ti(C5H54(C10H8O2P2S4]·3C4H8O, contains a central seven-membered TiO2P2S2 ring with a very similar geometry compared to the derivative showing anisyl instead of ferrocenyl substituents, the Ti—O distance being marginally longer for the anisyl derivative. Two tetrahydrofuran solvent molecules are each disordered on a twofold axis.

  3. Does oligomerization in fused thiophene affect reactivity and ...

    Indian Academy of Sciences (India)

    of interdisciplinary research activities on conjugated polymers to be ..... value shown by 1c (−146.18 kcal/mol) and the highest by. 1d (−118.19 .... chain length, etc. Earlier ...... In Handbook of Thiophene-Based Materials (Chich- ester: John ...

  4. MTBE and priority contaminant treatment with high energy electron beam injection

    Energy Technology Data Exchange (ETDEWEB)

    Cooper, William J; Nickelsen, Michael G; Mezyk, Stephen P; Leslie, Greg; Tornatore, Paul M; Hardison, Wayne; Hajali, Paris A

    2002-11-01

    A study was conducted to examine the removal of methyl tert-butyl ether (MTBE) and 15 other organic compounds, as well as perchlorate ion, in waters of different quality. The 15 organic compounds consisted of halogenated solvents (chlorination), disinfection by-products, pesticides, and nitrosodimethylamine (NDMA). These studies were conducted using a pilot scale 20 kW mobile electron beam system at Water Factory 21, Orange County, CA where wastewater is treated and re-injected into the ground as a barrier to salt water intrusion. Future applications for this treated water include water reuse. Ground water and treated wastewater, after having gone through a reverse osmosis-polishing step (RO permeate), were used to prepare mixtures of the compounds. Using fundamental radiation chemistry, it was possible to examine the factors effecting removal efficiency of all the compounds as well as MTBE destruction and reaction by-product formation and removal. All of the organic compounds were destroyed in the studies and we also observed the destruction of perchlorate ion in one of the waters.

  5. MTBE and priority contaminant treatment with high energy electron beam injection

    International Nuclear Information System (INIS)

    Cooper, William J.; Nickelsen, Michael G.; Mezyk, Stephen P.; Leslie, Greg; Tornatore, Paul M.; Hardison, Wayne; Hajali, Paris A.

    2002-01-01

    A study was conducted to examine the removal of methyl tert-butyl ether (MTBE) and 15 other organic compounds, as well as perchlorate ion, in waters of different quality. The 15 organic compounds consisted of halogenated solvents (chlorination), disinfection by-products, pesticides, and nitrosodimethylamine (NDMA). These studies were conducted using a pilot scale 20 kW mobile electron beam system at Water Factory 21, Orange County, CA where wastewater is treated and re-injected into the ground as a barrier to salt water intrusion. Future applications for this treated water include water reuse. Ground water and treated wastewater, after having gone through a reverse osmosis-polishing step (RO permeate), were used to prepare mixtures of the compounds. Using fundamental radiation chemistry, it was possible to examine the factors effecting removal efficiency of all the compounds as well as MTBE destruction and reaction by-product formation and removal. All of the organic compounds were destroyed in the studies and we also observed the destruction of perchlorate ion in one of the waters

  6. Molecular dynamics simulations on desulfurization of n-octane/thiophene mixture using silica filled polydimethylsiloxane nanocomposite membranes

    International Nuclear Information System (INIS)

    Shariatinia, Zahra; Jalali, Azin Mazloom; Taromi, Faramarz Afshar

    2016-01-01

    Molecular dynamics (MD) simulations were performed at 298.15 K and 1 atm in order to study microstructure and transport behaviors of polydimethylsiloxane (PDMS) membranes containing 0%–8% SiO 2 nanoparticles used for the separation of thiophene from n-octane. It was found that the fractional free volume (FFV) of 0% SiO 2 was the highest (47.24%) among five nanocomposite membranes and addition of 2%–8% silica nanoparticles led to dramatic decrease in the FFV of the cells. The x-ray diffraction (XRD) patterns of all membranes showed that they had a semi-crystalline structure containing a broad peak around 15°–18°. The radial distribution function (RDF) analysis proved that the smallest C(CH 2 -octane)–O(SiO 2 ), C(PDMS)–O(SiO 2 ) and H(thiophene)–O(SiO 2 ) distances were present in 4% SiO 2 membrane reflecting the silica–octane, silica–polymer and silica–thiophene interactions were the strongest in this membrane. The mean squared displacement (MSD) and diffusion coefficients of n-octane were both small in the 6% silica membrane but they were high for thiophene suggesting this membrane was the most suitable for the desulfurization process and separation of thiophene from n-octane. (paper)

  7. Synthesis, characterization and nano-structuration of poly-thiophene derivatives for organic photovoltaic solar cells

    International Nuclear Information System (INIS)

    Berson, S.

    2007-10-01

    This work is devoted to the synthesis of poly-thiophene derivatives with low bandgap and preserving high oxidation potential. Disubstituted thiophenes and 'Donor-Acceptor' bi-thiophenes were synthesized and then polymerized. The side chains of these polymers, donor or acceptor, were modified in order to tune the properties of material as well from the optical point of view as electrochemical. These polymers were also tested in blend with PCBM in bulk-heterojunction photovoltaic cells. Voc delivered by the devices showed a linear dependence according to the potential of oxidation of the polymers. Copolymers containing cyano-thiophene and alkyl- or alkoxy-thiophene showed values of 0.8 V. However, in spite of power conversion efficiency of 1 %, these performances remain lower than the one obtained with the P3HT. Optimizations in terms of morphology are certainly necessary. Indeed, the morphology of the active layer plays a key role in obtaining high power conversion efficiency. An original technique of nano-structuration of the polymer on a nano-metric scale was developed during this work, leading to the development of fibrillar P3HT. These nano-structures, presenting an important degree of order, are formed spontaneously in solution. Their rate compared to amorphous material is perfectly controllable and adjustable in solution and in solid state. Measurements of mobilities show a strong improvement of the transport of load within these fibrillar layers compared to a traditional film of P3HT obtained without annealing. Power conversion efficiencies of 3.6% on glass and 3.3 % on plastic were reached without annealing. (author)

  8. Synthesis, characterization and nano-structuration of poly-thiophene derivatives for organic photovoltaic solar cells

    International Nuclear Information System (INIS)

    Berson, S.

    2007-10-01

    This work is devoted to the synthesis of poly-thiophene derivatives with low bandgap and preserving high oxidation potential. Di-substituted thiophenes and 'Donor-Acceptor' bi-thiophenes were synthesized and then polymerized. The side chains of these polymers, donor or acceptor, were modified in order to tune the properties of material as well from the optical point of view as electrochemical. These polymers were also tested in blend with PCBM in bulk-heterojunction photovoltaic cells. Voc delivered by the devices showed a linear dependence according to the potential of oxidation of the polymers. Copolymers containing cyano-thiophene and alkyl- or alkoxy-thiophene showed values of 0.8 V. However, in spite of power conversion efficiency of 1 %, these performances remain lower than the one obtained with the P3HT. Optimizations in terms of morphology are certainly necessary. Indeed, the morphology of the active layer plays a key role in obtaining high power conversion efficiency. An original technique of nano-structuration of the polymer on a nano-metric scale was developed during this work, leading to the development of fibrillary P3HT. These nano-structures, presenting an important degree of order, are formed spontaneously in solution. Their rate compared to amorphous material is perfectly controllable and adjustable in solution and in solid state. Measurements of mobilities show a strong improvement of the transport of load within these fibrillary layers compared to a traditional film of P3HT obtained without annealing. Power conversion efficiencies of 3.6 % on glass and 3.3 % on plastic were reached without annealing. (author)

  9. Preliminary antifungal and cytotoxic evaluation of synthetic cycloalkyl[b]thiophene derivatives with PLS-DA analysis.

    Science.gov (United States)

    Souza, Beatriz C C; De Oliveira, Tiago B; Aquino, Thiago M; de Lima, Maria C A; Pitta, Ivan R; Galdino, Suely L; Lima, Edeltrudes O; Gonçalves-Silva, Teresinha; Militão, Gardênia C G; Scotti, Luciana; Scotti, Marcus T; Mendonça, Francisco J B

    2012-06-01

    A series of 2-[(arylidene)amino]-cycloalkyl[b]thiophene-3-carbonitriles (2a-x) was synthesized by incorporation of substituted aromatic aldehydes in Gewald adducts (1a-c). The title compounds were screened for their antifungal activity against Candida krusei and Criptococcus neoformans and for their antiproliferative activity against a panel of 3 human cancer cell lines (HT29, NCI H-292 and HEP). For antiproliferative activity, the partial least squares (PLS) methodology was applied. Some of the prepared compounds exhibited promising antifungal and proliferative properties. The most active compounds for antifungal activity were cyclohexyl[b]thiophene derivatives, and for antiproliferative activity cycloheptyl[b]thiophene derivatives, especially 2-[(1H-indol-2-yl-methylidene)amino]- 5,6,7,8-tetrahydro-4H-cyclohepta[b]thiophene-3-carbonitrile (2r), which inhibited more than 97 % growth of the three cell lines. The PLS discriminant analysis (PLS-DA) applied generated good exploratory and predictive results and showed that the descriptors having shape characteristics were strongly correlated with the biological data.

  10. Band resolution of optical spectra of solvated electrons in water, alcohols, and tetrahydrofuran

    International Nuclear Information System (INIS)

    Jou, F.-Y.; Freeman, G.R.

    1979-01-01

    The optical absorption spectra of solvated electrons in water, alcohols, and tetrahydrofuran are empirically resolved into two Gaussian bands and a continuum tail. The first Gaussian band covers most of the low energy side of the spectrum. The second Gaussian band lies at an energy slightly above that of the absorption maximum of the total spectrum. With the exception of tert-butyl alcohol, in water and alcohols the following were observed: (a) the first Gaussian bands have the same half-width, but the oscillator strength in water is about double that in an alcohol; (b) the second Gaussian bands have similar half-widths and oscillator strengths; (c) the continuum tails have similar half-widths, yet that in water possesses only about one third as much oscillator strength as the one in alcohol. In tert-butyl alcohol and tetrahydrofuran the first Gaussian band and the continuum tail each carry nearly half of the total oscillator strength. (author)

  11. Study of thiophene inner shell photofragmentation

    International Nuclear Information System (INIS)

    Mundim, M.S.P.; Mocellin, A.; Makiuchi, N.; Naves de Brito, A.; Attie, M.; Correia, N.

    2007-01-01

    We investigated the inner shell photofragmentation of thiophene by time of flight (TOF) mass spectroscopy using multi-coincidence electron-ion techniques. Our main purpose was to understand aspects of molecular relaxation process after inner shell excitation and to search for bond break selectivity. Analyses of mass and branching ratios are presented and the results suggest different mechanisms and channel of fragmentation when compared with S 2p and C 1s excitations

  12. Study of thiophene inner shell photofragmentation

    Energy Technology Data Exchange (ETDEWEB)

    Mundim, M.S.P. [Instituto de Fisica, Universidade de Brasilia-UnB, P.O. Box 04455, CEP 70919-970 Brasilia, DF (Brazil)], E-mail: spedrosa@fis.unb.br; Mocellin, A.; Makiuchi, N. [Instituto de Fisica, Universidade de Brasilia-UnB, P.O. Box 04455, CEP 70919-970 Brasilia, DF (Brazil); Naves de Brito, A. [Instituto de Fisica, Universidade de Brasilia-UnB, P.O. Box 04455, CEP 70919-970 Brasilia, DF (Brazil); Laboratorio Nacional de Luz Sincrotron-LNLS, P.O. Box 6192, CEP 13084-971 Campinas, SP (Brazil); Attie, M. [Departamento de Ciencias Biologicas, Universidade Estadual de Santa Cruz, UESC Rodovia Ilheus-Itabuna, km 16, CEP 45 650 000 Ilheus, BA (Brazil); Correia, N. [Departamento de Ciencias Exatas e Tecnologicas, Universidade Estadual de Santa Cruz, UESC, Rodovia Ilheus-Itabuna, km 16, CEP 45 650 000 Ilheus, BA (Brazil); Departament of Quantum Chemistry, University of Uppsala, P.O. Box 518, 751 21 Uppsala (Sweden)

    2007-03-15

    We investigated the inner shell photofragmentation of thiophene by time of flight (TOF) mass spectroscopy using multi-coincidence electron-ion techniques. Our main purpose was to understand aspects of molecular relaxation process after inner shell excitation and to search for bond break selectivity. Analyses of mass and branching ratios are presented and the results suggest different mechanisms and channel of fragmentation when compared with S 2p and C 1s excitations.

  13. A Practical Approach to the Design, Monitoring, and Optimization of the Situ MTBE Aerobic Biobarriers

    National Research Council Canada - National Science Library

    Johnson, Paul

    2004-01-01

    ...) aerobic biobarriers. The technology discussed in this document is applied for the purposes of containing or preventing further migration of existing dissolved MTBE groundwater plumes, or for the purpose of eliminating...

  14. Improvement of high voltage cycling performance and thermal stability of lithium-ion cells by use of a thiophene additive

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Ki-Soo; Sun, Yang-Kook; Kim, Dong-Won [Department of Chemical Engineering, Hanyang University, Seungdong-gu, Seoul 133-791 (Korea); Noh, Jaegeun [Department of Chemistry, Hanyang University, Seungdong-gu, Seoul 133-791 (Korea); Song, Kwang Soup [Advanced Medical Device Center, Korea Electrotechnology, Research Institute, Ansan, Gyeonggi-do 426-170 (Korea)

    2009-10-15

    This study demonstrates that the addition of thiophene improves the cycle life of lithium-ion cells at high voltage. Electrochemical impedance spectroscopy results suggest that addition of thiophene significantly suppresses the increase of the charge transfer resistance that occurs during cycling up to high voltage. Differential scanning calorimetric studies showed that the thermal stability of fully charged LiCoO{sub 2} cathode was also enhanced in the presence of thiophene. (author)

  15. Jumping, Rotating, and Flapping: The Atomic-Scale Motion of Thiophene on Cu(111).

    Science.gov (United States)

    Lechner, Barbara A J; Sacchi, Marco; Jardine, Andrew P; Hedgeland, Holly; Allison, William; Ellis, John; Jenkins, Stephen J; Dastoor, Paul C; Hinch, B J

    2013-06-06

    Self-assembled monolayers of sulfur-containing heterocycles and linear oligomers containing thiophene groups have been widely employed in organic electronic applications. Here, we investigate the dynamics of isolated thiophene molecules on Cu(111) by combining helium spin-echo (HeSE) spectroscopy with density functional theory calculations. We show that the thiophene/Cu(111) system displays a rich array of aperiodic dynamical phenomena that include jump diffusion between adjacent atop sites over a 59-62 meV barrier and activated rotation around a sulfur-copper anchor, two processes that have been observed previously for related systems. In addition, we present experimental evidence for a new, weakly activated process, the flapping of the molecular ring. Repulsive inter-adsorbate interactions and an exceptionally high friction coefficient of 5 ± 2 ps(-1) are also observed. These experiments demonstrate the versatility of the HeSE technique, and the quantitative information extracted in a detailed analysis provides an ideal benchmark for state-of-the-art theoretical techniques including nonlocal adsorbate-substrate interactions.

  16. Characterization of ZSM-5 modified with niobium pentoxide: the study of thiophene adsorption

    Energy Technology Data Exchange (ETDEWEB)

    Cavalcanti, Rodrigo M.; Barros, Ivoneide de C.L., E-mail: ibarros@ufam.edu.br [Universidade Federal do Amazonas (UFAM), Manaus, AM (Brazil). Inst. de Ciencias Exatas; Dias, Jose A.; Dias, Silvia C.L. [Universidade de Brasilia (UnB), DF (Brazil). Inst. de Quimica

    2013-01-15

    ZSM-5 adsorbents impregnated with Nb{sub 2}O{sub 5} were applied in the sulfur removal in the form of thiophene, refractory substance of difficult removal of liquid fuels. For this purpose, a model fuel containing iso-octane contaminated with thiophene in concentrations of 877.5 to 1155 ppmw was prepared. The samples were characterized by X-ray diffractometry (XRD), Fourier transform infrared (FTIR) and Fourier transform-Raman (FT-Raman) spectroscopies for confirmation of the adsorbents, being prioritized the adsorption study with that containing 5 wt.% of niobium pentoxide, because it showed a greater capacity for removal of thiophene. The best results of adsorption were achieved at 353 K, a longer time to reach equilibrium was observed. Under these conditions, the best kinetic fitting was achieved using the equation of pseudo-second order, demonstrating the domain of the phenomenon of chemisorption. While under lower temperatures, the diffusion model presented a better approximation of the experimental results. Also, the increasing of temperature did enhance spontaneous processes. (author)

  17. Modeling Of A Reactive Distillation Column: Methyl Tertiary Butyl Ether (Mtbe Simulation Studies

    Directory of Open Access Journals (Sweden)

    Ismail Mohd Saaid Abdul Rahman Mohamed and Subhash Bhatia

    2012-10-01

    Full Text Available A process simulation stage-wise reactive distillation column model formulated from equilibrium stage theory was developed. The algorithm for solving mathematical model represented by sets of differential-algebraic equations was based on relaxation method. Numerical integration scheme based on backward differentiation formula was selected for solving the stiffness of differential-algebraic equations. Simulations were performed on a personal computer (PC Pentium processor through a developed computer program using FORTRAN90 programming language. The proposed model was validated by comparing the simulated results with the published simulation results and with the pilot plant data from the literature. The model was capable of predicting high isobutene conversion for heterogeneous system, as desirable in industrial MTBE production process. The comparisons on temperature profiles, liquid composition profile and operating conditions of reactive distillation column also showed promising results. Therefore the proposed model can be used as a tool for the development and simulation of reactive distillation column.Keywords: Modeling, simulation, reactive distillation, relaxation method, equilibrium stage, heterogeneous, MTBE

  18. Quenching of excited uranyl ion during its photochemical reduction with triphenyl-phosphine : Part IV - effect of heterocyclic molecules

    International Nuclear Information System (INIS)

    Sidhu, M.S.; Bhatia, P.V.K.

    1994-01-01

    The presence of heterocyclic compounds triggers off a competition between photophysical and photochemical annihilation of excited uranyl ion during its photochemical reduction with triphenylphosphine. This competition is used to measure Stern-Volmer constant using UV visible spectrophotometer for quenching the uranyl ion luminescence with a number of heterocyclic molecules viz., pyridine, thiophene bipyridyl, tetrahydrofuran and piperidine. (author). 7 refs., 2 figs., 1 tab

  19. DERMAL, ORAL, AND INHALATION PHARMACOKINETICS OF METHYL TERTIARY BUTYL ETHER (MTBE) IN HUMAN VOLUNTEERS

    Science.gov (United States)

    Methyl tertiary butyl ether (MTBE), a gasoline additive, used to increase octane and reduce carbon monoxide emissions and ozone precursors has contaminated drinking water leading to exposure by oral, inhalation, and dermal routes. To determine its dermal, oral, and inhalation ki...

  20. The nature of interactions between [Cu2Cl3]−-based ionic liquid and thiophene – A theoretical study

    Directory of Open Access Journals (Sweden)

    Renqing Lü

    2016-05-01

    Full Text Available In an effort to deepen the understanding of nature of interactions between CuCl-based ionic liquids and thiophene, the electronic and topological properties of interactions between 1-butyl-3-methylimidazolium ([BMIM]+[Cu2Cl3]− and thiophene (TS have been investigated by the density functional theory. The occurrence of interactions caused by resonance effects between virtual orbitals of Cu and virtual orbitals of thiophene has been corroborated at the molecular level.

  1. MONITORED NATURAL ATTENUATION AND RISK MANAGEMENT OF MTBE AND TBA IN GROUND WATER

    Science.gov (United States)

    Monitored natural attenuation (as U.S. EPA defines the term) is a remedy, where natural processes bring the concentration of MTBE or TBA to an acceptable level in a reasonable period of time. The longevity of the plume is its critical property. The rate of attenuation is typica...

  2. DERMAL, ORAL AND INHALATION PHARMACOKINETICS OF METHYL TERTIARY-BUTYL ETHER (MTBE) IN HUMAN VOLUNTEERS

    Science.gov (United States)

    Methyl tertiary butyl ether (MTBE), a gasoline additive used to increase octane and reduce carbon monoxide emissions and ozone precursors, has contaminated drinking water and can lead to exposure by oral, inhalation, and dermal routes. To determine its dermal, oral, and inhal...

  3. MTBE BIOREMEDIATION WITH BIONETS CONTAINING ISOLITE®, PM1, SOLID OXYGEN SOURCE (SOS) OR AIR

    Science.gov (United States)

    MTBE, a gasoline additive, is a persistent and foul tasting contaminant that is more mobile in groundwater than BTEX (benzene, toluene, ethylbenzene, xylenes). It is turning up at many American crossroads. The objective of this well controlled study was to determine if biological...

  4. The application of hydrogen-palladium electrode for potentiometric acid-base determinations in tetrahydrofuran

    Directory of Open Access Journals (Sweden)

    Jokić Anja B.

    2013-01-01

    Full Text Available The application of the hydrogen-palladium electrode (H2/Pd as the indicator electrode for the determination of relative acidity scale (Es, mV of tetrahydrofuran (THF and the potentiometric titrations of acids in this solvent was investigated. The relative acidity scale tetrahydrofuran was determined from the difference half-neutralization potentials of perchloric acid and tetrabutylammonium hydroxide (TBAH, which were measured by using both H2/Pd-SCE and glass-SCE electrode pairs. The experimentally obtained value of Es scale THF with a H2/Pd-SCE electrode pair was 1155 mV, and those obtained with glass-SCE electrode pair 880 mV. By using a H2/Pd indicator electrode, the individual acids (benzoic acid, palmitic acid, maleic acid, acetyl acetone, α-naphthol and two component acid mixtures (benzoic acid + α-naphthol, palmitic acid + α-naphthol, maleic acid + α-naphthol and maleic acid + ftalic acid were titrated with a standard solution of TBAH. In addition, sodium methylate and potassium hydroxide proved to be very suitable titrating agents for titrating of the individual acids and the acids in mixtures, respectively. The relative error of the determination of acids in mixture was less than 3%. The results are in agreement with those obtained by a conventional glass electrode. The advantages of H2/Pd electrode over a glass electrode in potentiometric acid-base determinations in tetrahydrofuran lie in the following: this electrode gives wider relative acidity scale THF, higher the potential jumps at the titration end-point and relatively fast response time; furthermore, it is very durable, simple to prepare and can be used in the titrations of small volumes. [Projekat Ministarstva nauke Republike Srbije, br.172051

  5. Tetrahydrofuran Calpha-tetrasubstituted amino acids: two consecutive beta-turns in a crystalline linear tripeptide.

    Science.gov (United States)

    Maity, Prantik; Zabel, Manfred; König, Burkhard

    2007-10-12

    The synthesis of tetrahydrofuran Calpha-tetrasubstituted amino acids (TAAs) and their effect on the conformation in small peptides are reported. The synthesis starts from the protein amino acid methionine, which is protected at the C and N terminus and converted into the corresponding sulfonium salt by alkylation. Simple base treatment in the presence of an aryl aldehyde leads to the formation of tetrahydrofuran tetrasubstituted Calpha-amino acids in a highly diastereoselective (trans/cis ratio up to 97:3) reaction with moderate to good yields (35-78%) depending on the aldehyde used. Palladium-catalyzed coupling reactions allow a subsequent further functionalization of the TAA. The R,S,S-TAA-Ala dipeptide amide adopts a beta-turn type I conformation, whereas its S,R,S isomer does not. The R,S,S-Gly-TAA-Ala tripeptide amide shows in the solid state and in solution a conformation of two consecutive beta-turn type III structures, stabilized by i+3-->i intramolecular hydrogen bonds.

  6. N1-(Thiophen-2-ylmethyl-N3,N3-bis[3-(thiophen-2-ylmethylammoniopropyl]propane-1,3-diammonium hexafluoridosilicate methanol trisolvate

    Directory of Open Access Journals (Sweden)

    Md. Alamgir Hossain

    2013-12-01

    Full Text Available In the title compound, C24H40N4S34+·2SiF62−·3CH3OH, the central tertiary amine function is protonated and is connected to three thiophen-2-ylmethylamino-n-propyl groups, forming the arms of a T-shaped cation that has two pockets. Each arm contains one protonated secondary amine function, and each pocket is occupied by one SiF62− anion bonded via two N—H...F interactions with the protonated amine group on the middle arm, while two methanol solvent molecules are N—H...O hydrogen-bonded with the other secondary protonated amine groups on the side arms. Weak O—H...O and O—H...F hydrogen bonds between the solvent molecules and between the solvent molecules and the anions, respectively, are also observed. All three thiophene groups in the arms are disordered over two sets of sites, with occupancy ratios of 0.828 (3:0.172 (3, 0.910 (2:0.090 (2 and 0.890 (3:0.110 (3.

  7. Alkylated indacenodithieno[3,2-b]thiophene-based all donor ladder-type conjugated polymers for organic thin film transistors

    KAUST Repository

    Lu, Rimei

    2018-01-29

    We report the synthesis of a series of indacenodithieno[3,2-b]thiophene (IDTT) based conjugated polymers by copolymerization with three different electron rich co-monomers [thiophene (T), thieno[3,2-b]thiophene (TT) and dithieno[3,2-b:2\\',3\\'-d]thiophene (DTT)] under Stille coupling conditions. The resulting all-donor polymers show very good solubility in common solvents and exhibit similar optical, thermal and electronic properties. However, the performance of these semiconductors in thin film transistor devices varied and was highly dependent on the nature of the co-monomer. All polymers exhibited unipolar p-type charge transport behaviour, with the mobility values following the trend of IDTT-TT>IDTT-DTT>IDTT-T. The peak saturation mobility value of IDTT-TT was extracted to be 1.1 cm2V-1s-1, amongst the highest mobility for all-donor conjugated polymers reported to date.

  8. Recommended vapor pressures for thiophene, sulfolane, and dimethyl sulfoxide

    Czech Academy of Sciences Publication Activity Database

    Fulem, Michal; Růžička, K.; Růžička, M.

    2011-01-01

    Roč. 303, č. 2 (2011), s. 205-216 ISSN 0378-3812 Institutional research plan: CEZ:AV0Z10100521 Keywords : thiophene sulfolane * dimethyl sulfoxide * vapor pressure * heat capacity * vaporization enthalpy * recommended vapor pressure equation Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 2.139, year: 2011

  9. NOVEL EMBEDDED CERAMIC ELECTRODE SYSTEM TO ACTIVATE NANOSTRUCTURED TITANIUM DIOXIDE FOR DEGRADATION OF MTBE

    Science.gov (United States)

    A novel reactor combining a flame-deposited nanostructured titanium dioxide film and a set of embedded ceramic electrodes was designed, developed and tested for degradation of methyl tert-butyl ether (MTBE) in water. On applying a voltage to the ceramic electrodes, a surface coro...

  10. Electrochemical copolymerization of thiophene derivatives; a precursor to photovoltaic devices

    International Nuclear Information System (INIS)

    Kumar, Prajwal; Ranjith, K.; Gupta, Satyajit; Ramamurthy, Praveen C.

    2011-01-01

    Highlights: → This work presents an electrochemical technique for the polymerization and copolymerization of thiophene derivatives. → Copolymerization of thiophene based monomers like 7,9-dithiophene-2yl-8H-cyclopenta[a]acenaphthalene-8-one and 3-hexylthiophene are synthesized. → Study of the structural, optical, thermal, conductivity, morphological, band gap and impedance measurements of the copolymer indicates a suitable material for photovoltaic applications. - Abstract: This work presents an electrochemical technique for the polymerization and copolymerization of thiophene derivatives like 7,9-dithiophene-2yl-8H-cyclopenta[a]acenaphthalene-8-one and 3-hexylthiophene. The structural characterization of chemically synthesized monomers and electrochemically synthesized polymers was carried out by nuclear magnetic resonance and Fourier transform infrared spectroscopy. Thermal characterizations indicate that copolymer has increased thermal stability than that of homopolymer. Morphological studies of the polymerized films carried out by scanning electron microscopy shows network structure of copolymer. Optical properties of the homopolymers and copolymer were studied by UV-visible spectrometer and it was observed that band gap of copolymer is less than the homopolymers. HOMO and LUMO levels, band gap values of the respective polymers were also calculated from the cyclic voltammetry technique with various scan rates. By the peak current obtained from various scan rates shows that all polymerization reactions are diffusion controlled process. Charge transfer resistances of polymers were determined using Nyquist plots. Conductivity of synthesized polymers shows higher conductivity for copolymer than homopolymers.

  11. Self organized growth of organic thiophene-phenylene nanowires on silicate surfaces

    DEFF Research Database (Denmark)

    Balzer, F.; Schiek, Manuela; Lützen, Arne

    2009-01-01

    changes in the choice of the substrate lead to distinctly different growth behavior. On muscovite, a commensurate wetting layer of lying molecules is initially formed with subsequent formation of clusters, which assemble into mutually parallel nanowires. The wires grow along a 110 muscovite direction......Results of a systematic study of the growth of blue-green light-emitting 2,5-di-4-biphenyl-thiophene (PPTPP) molecules on the (001) faces of the sheet silicates muscovite and phlogopite mica are reported. This includes morphology, crystallography, and optical properties. It is shown that small....... In comparison to similar organic molecules, it is found that overall PPTPP has a growth behavior more similar to that of the p-phenylenes as compared to that of the α-thiophenes....

  12. STABLE ISOTOPE ANALYSIS OF MTBE TO EVALUATE THE SOURCE OF TBA IN GROUND WATER

    Science.gov (United States)

    Although tert-butyl alcohol (TBA) has not been used as a fuel oxygenate in Orange County, California, the concentrations of TBA in ground water at gasoline spill sites are high compared those of the conventional fuel oxygenate methyl tert-butyl ether (MTBE). In the year 2002, th...

  13. Adsorption of BTEX, MTBE and TAME on natural and modified diatomite.

    Science.gov (United States)

    Aivalioti, Maria; Papoulias, Panagiotis; Kousaiti, Athanasia; Gidarakos, Evangelos

    2012-03-15

    The removal of BTEX (benzene, toluene, ethyl-benzene and m-,p-,o-xylenes), MTBE (methyl tertiary butyl ether) and TAME (tertiary amyl methyl ether) from aqueous solutions by raw, thermally, chemically and both chemically and thermally treated diatomite was studied, through batch adsorption experiments. In total, 14 different diatomite samples were created and tested. Selected physical characteristics of the adsorbents, such as specific surface area and pore volume distribution, were determined. Matrix and competitive adsorption effects were also explored. It was proved that the diatomite samples were effective in removing BTEX, MTBE and TAME from aqueous solutions, with the sample treated with HCl being the most effective, as far as its adsorption capacity and equilibrium time are concerned. Among the contaminants, BTEX appeared to have the strongest affinity, based on mass uptake by the diatomite samples. Matrix effects were proved to be strong, significantly decreasing the adsorption of the contaminants onto diatomite. The kinetics data proved a closer fit to the pseudo second order model, while the isotherm experimental data were a better fit to the Freundlich model. However, the latter produced values of the isotherm constant 1/n greater than one, indicating unfavorable adsorption. Copyright © 2011 Elsevier B.V. All rights reserved.

  14. MTBE BIOREMEDIATION WITH BIONETS(TM) CONTAINING ISOLITE, PM1, SOLD OXYGEN SOURCE (SOS) OR AIR

    Science.gov (United States)

    MTBE, a gasoline additive, is a persistent and foul tasting contaminant that is more mobile in groundwater than BTEX (benzene, toluene, ethylbenzene, xylenes). It is turning up at many American crossroads. The objective of this well controlled study was to determine if biological...

  15. A Furan-Thiophene-Based Quinoidal Compound: A New Class of Solution-Processable High-Performance n-Type Organic Semiconductor.

    Science.gov (United States)

    Xiong, Yu; Tao, Jingwei; Wang, Ruihao; Qiao, Xiaolan; Yang, Xiaodi; Wang, Deliang; Wu, Hongzhuo; Li, Hongxiang

    2016-07-01

    The furan-thiophene-based quinoidal organic semiconductor, TFT-CN, is designed and synthesized. TFT-CN displays a high electron mobility of 7.7 cm(2) V(-1) s(-1) , two orders of magnitude higher than the corresponding thiophene-based derivative. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. Volumetric properties of the (tetrahydrofuran + water) and (tetra-n-butyl ammonium bromide + water) systems: Experimental measurements and correlations

    International Nuclear Information System (INIS)

    Belandria, Veronica; Mohammadi, Amir H.; Richon, Dominique

    2009-01-01

    In this communication, we report experimental density data for the binary mixtures of (water + tetrahydrofuran) and (water + tetra-n-butyl ammonium bromide) at atmospheric pressure and various temperatures. The densities were measured using an Anton Paar TM digital vibrating-tube densimeter. For the (tetrahydrofuran + water) system, excess molar volumes have been calculated using the experimental densities and correlated using the Redlich-Kister equation. The Redlich-Kister equation parameters have been adjusted on experimental results. The partial molar volumes and partial excess molar volumes at infinite dilution have also been calculated for each component. A simple density equation was finally applied to correlate the measured density of the (tetra-n-butyl ammonium bromide + water) system.

  17. inhibition performance of mild ste thiophene ac rmance of mild steel

    African Journals Online (AJOL)

    userpc

    d Industrial Chemistry, Faculty of Physical Science, Bayero University, Kan. P. M. B. 3011 ..... chemical studies on the inhibition potentials of some ... Efficiency of Thiophene Derivatives on. Mild Steel : A QSAR Model. International. Journal.

  18. Plasma nanocoating of thiophene onto MoS{sub 2} nanotubes

    Energy Technology Data Exchange (ETDEWEB)

    Türkaslan, Banu Esencan [Suleyman Demirel University, Faculty of Engineering, Department of Chemical Engineering, 32260 Isparta (Turkey); Dikmen, Sibel [Suleyman Demirel University, Faculty of Arts and Science, Department of Chemistry, 32260 Isparta (Turkey); Öksüz, Lütfi [Suleyman Demirel University, Faculty of Arts and Science, Department of Physics, 32260 Isparta (Turkey); Öksüz, Aysegul Uygun, E-mail: ayseguluygun@sdu.edu.tr [Suleyman Demirel University, Faculty of Arts and Science, Department of Chemistry, 32260 Isparta (Turkey)

    2015-12-01

    Highlights: • MoS{sub 2} nanotubes were coated with thiophene by atmospheric pressure radio-frequency (RF) glow discharge. • Among nanohybrid preparation methods, the plasma methods appear as new technology. • The effect of plasma power on PTh/MoS{sub 2} nanocomposite properties has been investigated. • When the discharge power is increased between 117 and 360 W the chemical structure of PTh is not changed and the structure of nanocomposites become more uniformly. - Abstract: MoS{sub 2} nanotubes were coated with conductive polymer thiophene by atmospheric pressure radio-frequency (RF) glow discharge. MoS{sub 2} nanotubes were prepared by thermal decomposition of hexadecylamine (HDA) intercalated laminar MoS{sub 2} precursor on anodized aluminum oxide template and the thiophene was polymerized directly on surface of these nanotubes as in situ by plasma method. The effect of plasma power on PTh/MoS{sub 2} nanocomposite properties has been investigated by means of Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM and EDX), and X-ray diffraction spectroscopy (XRD). The presence of PTh bands in the FTIR spectra of PTh/MoS{sub 2} nanotube nanocomposites corresponding XRD results indicates that the polythiophene coating onto MoS{sub 2} nanotube. The chemical structure of PTh is not changed when the plasma power of discharge differ from 117 to 360 W. SEM images of nanocomposites show that when the discharge power is increased between 117 and 360 W the average diameter of PTh/MoS{sub 2} nanotube nanocomposites are changed and the structure become more uniformly.

  19. Bio-MTBE. How to reduce CO{sub 2} footprint in fuels with a well known premium gasoline component

    Energy Technology Data Exchange (ETDEWEB)

    Busch, O.; Schade, A.; Rasch, H.; Schulte-Koerne, E. [Evonik Industries AG, Marl (Germany)

    2012-07-01

    With the revision of Renewable Energy Directive (RED) and Fuels Quality Directive (FQD) in 2009 the EU Commission promoted the use of biofuels, especially of those made from residues and waste because of their favourable CO{sub 2} footprint. Crude glycerol is an inevitable residue of conventional biodiesel production and can therefore be used to make 2{sup nd} generation biofuels, in this case bio-methanol. Methanol itself has several application issues as a fuel and can only be blended into gasoline at low quantities (max. 3 vol.-% according to European gasoline specification EN 228). However, today methanol is virtually absent in European gasoline due to its detrimental properties (e.g. corrosivity, water miscibility, etc.). In contrast to this, MTBE (methyl tertiary butyl ether) made from methanol and isobutylene is a high value gasoline component that can be blended into gasoline at high quantities without any application issues. Current European gasoline specification allows up to 15 vol.-%% and the revised FQD has enabled the specification to be expanded to up to 22 vol.-% MTBE in gasoline. Thus, bio-methanol converted into bio-MTBE is an appropriate pathway to get a 2{sup nd} generation biofuel into the blending pool with perfect compatibility with infrastructure and the existing car fleet. (orig.)

  20. Inhalation developmental toxicology studies: Teratology study of tetrahydrofuran in mice and rats: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Mast, T.J.; Evanoff, J.J.; Stoney, K.H.; Westerberg, R.B.; Rommereim, R.L.; Weigel, R.J.

    1988-08-01

    Tetrahydrofuran (THF), a four-carbon cyclic ether, is widely used as an industrial solvent. Although it has been used in large quantities for many years, few long-term toxicology studies, and no reproductive or developmental studies, have been conducted on THF. This study addresses the potential for THF to cause developmental toxicity in rodents by exposing Sprague-Dawley rats and Swiss (CD-1) mice to 0, 600, 1800, or 5000 ppm tetrahydrofuran (THF) vapors, 6 h/day, 7 dy/wk. Each treatment group consisted of 10 virgin females (for comparison), and approx.33 positively mated rats or mice. Positively mated mice were exposed on days 6--17 of gestation (dg), and rats on 6--19 dg. The day of plug or sperm detection was designated as O dg. Body weights were obtained throughout the study period, and uterine and fetal body weights were obtained at sacrifice (rats, 20 dg; mice, 18 dg). Implants were enumerated and their status recorded and live fetuses were examined for gross, visceral, skeletal, and soft-tissue craniofacial defects. 27 refs., 6 figs., 23 tabs.

  1. C-shaped diastereomers containing cofacial thiophene-substituted quinoxaline rings: synthesis, photophysical properties, and X-ray crystallography.

    Science.gov (United States)

    DeBlase, Catherine R; Finke, Ryan T; Porras, Jonathan A; Tanski, Joseph M; Nadeau, Jocelyn M

    2014-05-16

    Synthesis and characterization of two diastereomeric C-shaped molecules containing cofacial thiophene-substituted quinoxaline rings are described. A previously known bis-α-diketone was condensed with an excess of 4-bromo-1,2-diaminobenzene in the presence of zinc acetate to give a mixture of two C-shaped diastereomers with cofacial bromine-substituted quinoxaline rings. After chromatographic separation, thiophene rings were installed by a microwave-assisted Suzuki coupling reaction, resulting in highly emissive diastereomeric compounds that were studied by UV-vis, fluorescence, and NMR spectroscopy, as well as X-ray crystallography. The unique symmetry of each diastereomer was confirmed by NMR spectroscopy. NMR data indicated that the syn isomer has restricted rotation about the bond connecting the thiophene and quinoxaline rings, which was also observed in the solid state. The spectroscopic properties of the C-shaped diastereomers were compared to a model compound containing only a single thiophene-substituted quinoxaline ring. Ground state intramolecular π-π interactions in solution were detected by NMR and UV-vis spectroscopy. Red-shifted emission bands, band broadening, and large Stokes shifts were observed, which collectively suggest excited state π-π interactions that produce excimer-like emissions, as well as a remarkable positive emission solvatochromism, indicating charge-transfer character in the excited state.

  2. Increasing hydrogen storage capacity using tetrahydrofuran.

    Science.gov (United States)

    Sugahara, Takeshi; Haag, Joanna C; Prasad, Pinnelli S R; Warntjes, Ashleigh A; Sloan, E Dendy; Sum, Amadeu K; Koh, Carolyn A

    2009-10-21

    Hydrogen hydrates with tetrahydrofuran (THF) as a promoter molecule are investigated to probe critical unresolved observations regarding cage occupancy and storage capacity. We adopted a new preparation method, mixing solid powdered THF with ice and pressurizing with hydrogen at 70 MPa and 255 +/- 2 K (these formation conditions are insufficient to form pure hydrogen hydrates). All results from Raman microprobe spectroscopy, powder X-ray diffraction, and gas volumetric analysis show a strong dependence of hydrogen storage capacity on THF composition. Contrary to numerous recent reports that claim it is impossible to store H(2) in large cages with promoters, this work shows that, below a THF mole fraction of 0.01, H(2) molecules can occupy the large cages of the THF+H(2) structure II hydrate. As a result, by manipulating the promoter THF content, the hydrogen storage capacity was increased to approximately 3.4 wt % in the THF+H(2) hydrate system. This study shows the tuning effect may be used and developed for future science and practical applications.

  3. Current's Fluctuations through Molecular Wires Composed of Thiophene Rings.

    Science.gov (United States)

    Ojeda Silva, Judith Helena; Cortés Peñaranda, Juan Camilo; Gómez Castaño, Jovanny A; Duque, Carlos Alberto

    2018-04-11

    We study theoretically the electronic transport and quantum fluctuations in single-molecule systems using thiophene rings as integrated elementary functions, as well as the dependence of these properties with the increase of the coupled rings, i.e., as a quantum wire. In order to analyze the current flow through these molecular systems, the thiophene rings are considered to be connected to metal contacts, which, in general terms, will be related to the application of voltages (bias voltages or gate voltages) to generate non-equilibrium behavior between the contacts. Due to the nonlinear behavior that is generated when said voltages are applied, it is possible to observe quantum fluctuations in the transport properties of these molecular wires. For the calculation of the transport properties, we applied a tight-binding approach using the Landauer-Büttiker formalism and the Fischer-Lee relationship, by means of a semi-analytic Green's function method within a real-space renormalization (decimation procedure). Our results showed an excellent agreement with results using a tight-binding model with a minimal number of parameters reported so far for these molecular systems.

  4. False results caused by solvent impurity in tetrahydrofuran for maldi tof ms analysis of amines

    NARCIS (Netherlands)

    Lou, X.; Leenders, C.M.A.; van Onzen, Thuur; Bovee, R.A.A.; Van Dongen, J.L.J.; Vekemans, J.A.J.M.; Meijer, E. W.

    Tetrahydrofuran (THF) is one of the most frequently used solvents in the MALDI TOF MS analysis of synthetic compounds. However, it should be used with caution because a trace amount of 4-hydroxybutanal (HBA) might be generated and accumulated in THF during storage. Since only a tiny amount of

  5. (4-Methylphenyl[2-(thiophen-2-ylcarbonylphenyl]methanone

    Directory of Open Access Journals (Sweden)

    V. Silambarasan

    2011-09-01

    Full Text Available The crystal studied of the title compound, C19H14O2S, was an inversion twin with a 0.7 (1:0.3 (1 domain ratio. The central benzene ring makes dihedral angles of 63.31 (9 and 60.86 (9°, respectively, with the 4-methylphenyl and thiophene rings. In the crystal, molecules are linked by weak intermolecular C—H...O hydrogen bonds and S...π [3.609 (3 Å] interactions.

  6. 40 CFR 721.10088 - Thiophene, 2,5-dibromo-3-hexyl-.

    Science.gov (United States)

    2010-07-01

    ..., and consumer activities. Requirements as specified in § 721.80(s) (4,500 kilograms). (ii) Release to... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Thiophene, 2,5-dibromo-3-hexyl-. 721.10088 Section 721.10088 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC...

  7. Conducting polymers of octanoic acid 2-thiophen-3-yl-ethyl ester and their electrochromic properties

    International Nuclear Information System (INIS)

    Camurlu, Pinar; Cirpan, Ali; Toppare, Levent

    2005-01-01

    Octanoic acid 2-thiophen-3-yl-ethyl ester was synthesized via the reaction of 3-thiophene ethanol with octanoyl chloride. The resulting monomer was electrochemically homopolymerized in the presence of tetrabutylammonium tetrafluoroborate as the supporting electrolyte, in the acetonitrile/borontrifluoride ethyl ether solvent system. The resulting polymer was characterized using various experimental techniques. Spectroelectrochemistry analysis of the homopolymer reflects electronic transitions at 434, ∼800 and ∼1100 nm, revealing π-π* transition, polaron and bipolaron band formation, respectively, leading to esthetically pleasing color changes between transmissive yellow and blue, with reasonable switching times

  8. Measuring and modelling of the combined thermodynamic promoting effect of tetrahydrofuran and cyclopentane on carbon dioxide hydrates

    DEFF Research Database (Denmark)

    Herslund, Peter Jørgensen; Daraboina, Nagu; Thomsen, Kaj

    2014-01-01

    This work documents both experimental data, and by thermodynamic modelling, the synergistic effect occurring in promoted carbon dioxide hydrate systems at the simultaneous presence of tetrahydrofuran and cyclopentane.Cyclopentane has previously been considered a reference among gas hydrate promot...

  9. Optical absorption spectra of linear and cyclic thiophenes--selection rules manifestation

    International Nuclear Information System (INIS)

    Bednarz, Mariusz; Reineker, Peter; Mena-Osteritz, Elena; Baeuerle, Peter

    2004-01-01

    We theoretically study the size-dependent relation between absorption spectra of thiophene-based oligomers and the corresponding cyclothiophenes. In our approach based on a Frenkel exciton Hamiltonian, we demonstrate that the geometry and selection rules determine the observed relations between the spectra

  10. Insight into thiophene hydrodesulfurization on clean and S-modified MoP(010): a periodic density functional theory study.

    Science.gov (United States)

    Li, Guixia; Zhao, Lianming; Zhu, Houyu; Liu, Xiuping; Ma, Huifang; Yu, Yanchen; Guo, Wenyue

    2017-07-05

    The hydrodesulfurization (HDS) of thiophene on clean and S-modified MoP(010) is investigated to understand the HDS mechanism as well as the surface sulfur (S) atom effect using periodic density functional theory (DFT). The results show that thiophene prefers strongly flat adsorption on both the clean and S-modified surfaces, in either the molecular state or the dissociative state breaking simultaneously one C-S bond, and the adsorption of thiophene can be slightly weakened by the surface S atom. Thermodynamic and kinetic analysis indicates that the HDS of thiophene in both the molecular and dissociative adsorption states prefers to take place along the direct desulfurization (DDS) pathway rather than hydrogenation on both the clean and S-modified MoP(010) surfaces. Surface S shows a promotion effect on the HDS catalytic activity of MoP(010), because the energy barrier/rate constant of the rate-determining step on the DDS pathway is decreased/enlarged under the S modification. Compared with the situation of MoP(001), MoP(010) should have relatively low HDS activity, since a higher energy barrier as well as weaker exothermicity is involved in the reaction on the latter surface.

  11. A thiophene-modified screen printed electrode for detection of dengue virus NS1 protein.

    Science.gov (United States)

    Silva, M M S; Dias, A C M S; Cordeiro, M T; Marques, E; Goulart, M O F; Dutra, R F

    2014-10-01

    A thiophene-modified screen printed electrode (SPE) for detection of the Dengue virus non-structural protein 1 (NS1), an important marker for acute phase diagnosis, is described. A sulfur-containing heterocyclic compound, the thiophene was incorporated to a carbon ink to prepare reproducible screen printed electrodes. After cured, the thiophene SPE was coated by gold nanoparticles conjugated to Protein A to form a nanostrutured surface. The Anti-NS1 antibodies immobilized via their Fc portions via Protein A, leaving their antigen specific sites free circumventing the problem of a random antibodies immobilization. Amperometric responses to the NS1 protein of dengue virus were obtained by cyclic voltammetries performed in presence of ferrocyanide/ferricyanide as redox probe. The calibration curve of immunosensor showed a linear response from 0.04 µg mL(-1) to 0.6 µg mL(-1) of NS1 with a good linear correlation (r=0.991, pink enhanced the electroanalytical properties of the SPEs, increasing their reproducibility and sensitivity. This point-of-care testing represents a great potential for use in epidemic situations, facilitating the early diagnosis in acute phase of dengue virus. Copyright © 2014 Elsevier B.V. All rights reserved.

  12. Unraveling the Role of Π - Conjugation in Thiophene Oligomers for Optoelectronic Properties by DFT/TDDFT Approach

    Directory of Open Access Journals (Sweden)

    Gajalakshmi

    Full Text Available ABSTRACT Thiophene oligomer has been investigated using DFT/TDDFT calculations with an aim to check its suitability for opto electronic applications and also to analyse the influence of π-bridge. Our results revealed that thiophene oligomers have excellent π-conjugation throughout. FMO analysis give an estimate of band gap of thiophene oligomer and further revealed HOMO are localized on π - bridge, donor group and LUMO are localized on π - bridge and acceptor group. A TDDFT calculation has been performed to understand the absorption properties of them in gas phase and solvent phase. PCM calculations convey that absorption maxima show positive solvatochromism. Among the designed candidates, the one with more π - bridge show higher wavelength of absorption maxima and would be a choice for better optoelectronic materials. NBO analysis provides support for complete delocalization in these systems. It is interesting to note that oligomer with more π-bridge display an enhanced optoelectronic properties than with less π - bridge.

  13. The influence of inserted thiophene into the (π-A'-π)-bridge on photovoltaic performances of dye-sensitized solar cells

    International Nuclear Information System (INIS)

    Zhang, Zemin; Hu, Weixia; He, Rongxing; Shen, Wei; Li, Ming

    2017-01-01

    A series of metal-free D-π-A'-π-A type organic dyes have been designed by inserting one or two thiophene between the (π-A'-π)-bridge and the donor and/or acceptor moieties based on BZTP-1. The influence of inserted thiophene into the (π-A'-π)-bridge on photovoltaic performances of sensitizer was investigated in detail using the density functional theory (DFT) and its time-dependent density functional theory (TD-DFT) methods. Calculated results show that increasing the length of the conjugated-linker leads to a high planarity and very narrow HOMO-LUMO energy gap. Especially, dye T-T-BZTP-T-T that forms by inserting two thiophenes into two sides of BZTP exhibits the most obvious red-shifted and the strongest absorption, which leads to a high V oc . Moreover, we find that these dyes show a good character of electron injection and dye regeneration owing to the ideal ΔG inject , μ normal and ΔG reg . Therefore, the insertion of thiophene into the (π-A'-π)-bridge has a better influence on photovoltaic performance of designed dyes compared with BZTP-1. We hope the present work will be helpful for future experimental synthesis of organic dyes to improve the performance of DSSCs. - Highlights: • New D-π-A'-π-A type dyes were designed by inserting thiophene into (π-A'-π)-bridge. • The insertion of thiophene induces perfect electronic and photovoltaic performance. • Adsorbed dyes show good coupling interaction and photovoltaic properties on TiO 2 . • These novel dyes provide guiding strategy for improve efficiency of DSSCs.

  14. The influence of inserted thiophene into the (π-A'-π)-bridge on photovoltaic performances of dye-sensitized solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Zemin; Hu, Weixia; He, Rongxing; Shen, Wei; Li, Ming, E-mail: liming@swu.edu.cn

    2017-04-15

    A series of metal-free D-π-A'-π-A type organic dyes have been designed by inserting one or two thiophene between the (π-A'-π)-bridge and the donor and/or acceptor moieties based on BZTP-1. The influence of inserted thiophene into the (π-A'-π)-bridge on photovoltaic performances of sensitizer was investigated in detail using the density functional theory (DFT) and its time-dependent density functional theory (TD-DFT) methods. Calculated results show that increasing the length of the conjugated-linker leads to a high planarity and very narrow HOMO-LUMO energy gap. Especially, dye T-T-BZTP-T-T that forms by inserting two thiophenes into two sides of BZTP exhibits the most obvious red-shifted and the strongest absorption, which leads to a high V{sub oc}. Moreover, we find that these dyes show a good character of electron injection and dye regeneration owing to the ideal ΔG{sub inject}, μ{sub normal} and ΔG{sub reg}. Therefore, the insertion of thiophene into the (π-A'-π)-bridge has a better influence on photovoltaic performance of designed dyes compared with BZTP-1. We hope the present work will be helpful for future experimental synthesis of organic dyes to improve the performance of DSSCs. - Highlights: • New D-π-A'-π-A type dyes were designed by inserting thiophene into (π-A'-π)-bridge. • The insertion of thiophene induces perfect electronic and photovoltaic performance. • Adsorbed dyes show good coupling interaction and photovoltaic properties on TiO{sub 2}. • These novel dyes provide guiding strategy for improve efficiency of DSSCs.

  15. Simulating the synthesis and thermodynamic characteristics of the desolvation of lanthanide borohydride tris-Tetrahydrofuranates

    Science.gov (United States)

    Gafurov, B. A.; Mirsaidov, I. U.; Nasrulloeva, D. Kh.; Badalov, A.

    2013-10-01

    Lanthanide borohydride tris-tetrahydrofuranates (Ln(BH4) · 3THF, where THF is tetrahydrofuran and Ln is La, Nd, Sm, Gd, Er, Yb, and Lu) is synthesized via the exchange reaction of lanthanide(III) chloride and sodium borohydride in THF. It is found that synthesis proceeds according to a stepwise mechanism and the product of the reaction (lanthanide borohydride) initiates the process. The two-step character of the desolvation of Ln(BH4)3 · 3THF under steady-state conditions in the temperature range of 300 to 400 K is determined through X-ray phase and chemical analyses, tensiometry, and gas volumetry. It is established that one mole and then two moles of THF are removed from the initial sample at the first and second steps, respectively. Equations for barograms are obtained and the thermodynamic characteristics of desolvation of Ln(BH4)3 · 3THF under study are calculated. Gibbs energy values of the stages of process are determined semi-empirically. The law of its change for the entire series of Ln(BH4)3 · 3THF is determined with the emergence of the tetrad effect.

  16. Novel quinolines carrying pyridine, thienopyridine, isoquinoline, thiazolidine, thiazole and thiophene moieties as potential anticancer agents

    Directory of Open Access Journals (Sweden)

    Ghorab Mostafa M.

    2016-06-01

    Full Text Available As a part of ongoing studies in developing new anticancer agents, novel 1,2-dihydropyridine 4, thienopyridine 5, isoquinolines 6–20, acrylamide 21, thiazolidine 22, thiazoles 23–29 and thiophenes 33–35 bearing a biologically active quinoline nucleus were synthesized. The structure of newly synthesized compounds was confirmed on the basis of elemental analyses and spectral data. All the newly synthesized compounds were evaluated for their cytotoxic activity against the breast cancer cell line MCF7. 2,3-Dihydrothiazole-5-carboxamides 27, 25, 4,5,6,7-tetrahydrobenzo[b]thiophene-3-carboxamide (34, 1,2-dihydroisoquinoline-7-carbonitrile (7, 5,6,7,8-tetrahydro-4H-cyclohepta[b]thiophene-3-carboxamide (35, 1,2-dihydroisoquinoline-7-carbonitrile (6, 2-cyano-3-(dimethylamino-N-(quinolin-3-ylacrylamide (21, 1,2-dihydroisoquinoline-7-carbonitriles (11 and (8 exhibited higher activity (IC50 values of 27–45 μmol L–1 compared to doxorubicin (IC50 47.9 μmol L–1. LQ quinolin-3-yl-1,2-dihydroisoquinoline-7-carbonitrile (12, 2-thioxo-2,3-dihydrothiazole-5-carboxamide (28 and quinolin-3-yl-1,2-dihydroisoquinoline-7-carbonitrile (15 show activity comparable to doxorubicin, while (quinolin-3-yl-1,2-dihydroisoquinoline-7-carbonitrile (9, 2,3-dihydrothiazole-5-carboxamide (24, thieno [3,4-c] pyridine-4(5H-one (5, cyclopenta[b]thiophene-3-carboxamide (33 and (quinolin-3-yl-6-stryl-1,2-dihydroisoquinoline-7-carbonitrile (10 exhibited moderate activity, lower than doxorubicin.

  17. Solvent extraction of thiophene from n-alkanes (C7, C12, and C16) using the ionic liquid [C8mim][BF4

    International Nuclear Information System (INIS)

    Alonso, Luisa; Arce, Alberto; Francisco, Maria; Soto, Ana

    2008-01-01

    In the last years, new strict environmental regulations to reduce sulfur content in liquid fuels have been established. Thiophene derivates can be considered as the key substances to be separated from liquid fuel oils. This paper reports the ability of the ionic liquid 1-methyl-3-octylimidazolium tetrafluoroborate to act as solvent in the (liquid + liquid) extraction of thiophene from aliphatic hydrocarbons. Tie-line data have been determined for ternary systems containing the ionic liquid, thiophene, and some n-alkanes at T = 298.15 K. Extraction process has been analyzed by means of thiophene distribution ratio and selectivity. The solute distribution coefficient decreases and the selectivity increases as the chain length of n-alkane increases. The use of 1-methyl-3-octylimidazolium tetrafluoroborate as potential solvent for separation of thiophene from n-alkanes is feasible using the necessary quantity of solvent. A correlation of the equilibrium data reported here has also been made, using the NRTL activity coefficient model, in order to facilitate their use in simulation and design processes

  18. Rates and products of degradation for MTBE and other oxygenate fuel additives in the subsurface environment

    International Nuclear Information System (INIS)

    Tratnyek, P.G.; Church, C.D.; Pankow, J.F.

    1995-01-01

    The recent realization that oxygenated fuel additives such as MTBE are becoming widely distributed groundwater contaminants has created a sudden and pressing demand for data on the processes that control their environmental fate. Explaining and predicting the subsequent environmental fate of these compounds is going to require extrapolations over long time frames that will be very sensitive to the quality of input data on each compound. To provide such data, they have initiated a systematic study of the pathways and kinetics of fuel oxygenate degradation under subsurface conditions. Batch experiments in simplified model systems are being performed to isolate specific processes that may contribute to MTBE degradation. A variety of degradation pathways can be envisioned that lead to t-butyl alcohol (TBA) as the primary or secondary product. However, experiments to date with a facultative iron reducing bacteria showed no evidence for TBA formation. Continuing experiments include mixed cultures from a range of aquifer materials representative of NAWQA study sites

  19. Electrochemical investigation on an acrylated thiophene

    Energy Technology Data Exchange (ETDEWEB)

    Hogervorst, A.C.R. (TNO Plastics and Rubber Research Inst., Delft (Netherlands)); Kock, T.J.J.M. (TNO Plastics and Rubber Research Inst., Delft (Netherlands)); Ruiter, B. de (TNO Plastics and Rubber Research Inst., Delft (Netherlands)); Waal, A. van der (TNO Plastics and Rubber Research Inst., Delft (Netherlands))

    1993-03-22

    The electrochemical behaviour of electropolymerized 2-(3-thienyl)ethyl acrylate (PAcrT) has been investigated, and compared to the behaviour of electropolymerized thiophene and 3-n-decylthiophene (PDT). The effect of electron beam irradiation on the electrochemical properties of these three polymers has been studied. It has been found that for PAcrT the oxidation wave shifts to higher potentials upon electron beam irradiation. For PDT a similar but smaller change occurs. We suggest that the shift of the oxidation wave of PAcrT is caused by cross-links, formed between the acrylate substituents, which fixate the main chain parts in twisted states and reduce the conjugation length. (orig.)

  20. A First Synthesis and Physical Properties of Asymmetric Anthracenes-Thiophenes Bridged with Ethylene

    International Nuclear Information System (INIS)

    Hwang, Min Ji; Park, Ji Hee; Jeong, Eun Bin

    2012-01-01

    Here we report our recent result of a new semiconductor material, which has an asymmetric structure. The synthesized molecules consist of anthracene and thiophene connected by bridged ethylene and substituted with hexyl or dodecyl groups as pendants. The semiconductors were synthesized using a McMurry coupling reaction between anthracene-2-carbaldehyde and corresponding 5-hexyl(or dodecyl)thiophene-2-carbaldehyde. A first investigation of synthesized asymmetry AVHT (9a) and AVDT (9b) for the physical properties showed that they have high oxidation potential and thermal stability. The devices prepared by using AVHT (9a) and AVDT (9b) showed the mobility of 2.6 Χ 10 -2 cm 2 /Vs and 4.4 Χ 10 -3 cm 2 /Vs, respectively, in solution processed OTFTs

  1. Third derivative thermodynamic quantities of aqueous tetrahydrofuran at 25 degrees C

    DEFF Research Database (Denmark)

    Westh, Peter; Yoshida, Koh; Inaba, Akira

    2015-01-01

    –THF interaction functions, HETHF–THF, and SETHF–THF. Using the literature density data, the effect of THF on the excess partial molar volume of THF, VETHF–THF, was also evaluated. Furthermore, we directly determined the partial molar entropy-volume cross fluctuation density of THF, View the MathML sourceδ......We measured the excess chemical potential, μΕTHF, the excess partial molar enthalpy and entropy of solute tetrahydrofuran (THF), HETHF and SETHF, in THF–H2O at 25 °C. Using these second derivatives of G, we graphically evaluated the third derivative quantities; the enthalpic, entropic THF...

  2. Effects on temperature and acidic pre-treatment on Fenton-driven oxidation of MTBE-spent granular activated carbon

    Science.gov (United States)

    Temperature-dependent mechanisms in the Fenton-driven chemical oxidation of methyl tert-butyl ether (MTBE)-spent granular activated carbon (GAC) was investigated. Prior to iron (Fe) amendment to the GAC, acid-treatment altered the surface chemistry of the GAC and lowered the p...

  3. Fenton-driven regeneration of MTBE-spent granular activated carbon - Effects of particle size and Iron Amendment Procedures

    Science.gov (United States)

    Fenton-driven regeneration of spent granular activated carbon (GAC) is a technology being developed to regenerate organic contaminant-spent GAC. Here, the effect of GAC particle size (>2 mm to Fenton-driven oxidation of methyl tert-butyl ether (MTBE)-spent GAC was ev...

  4. Synthesis and antitumor evaluation of thiophene based azo dyes incorporating pyrazolone moiety

    Directory of Open Access Journals (Sweden)

    Moustafa A. Gouda

    2016-03-01

    Full Text Available A series of thiophene incorporating pyrazolone moieties 5a–f and 6a–c were synthesized via diazo coupling of diazonium salt of 3-substituted-2-amino-4,5,6,7-tetrahydrobenzo[b]thiophenes 1a–c with 3-methyl-1H-pyrazol-5(4H-one, 3-methyl-1-phenyl-1H-pyrazol-5(4H-one or 3-amino-1H-pyrazol-5(4H-one, respectively. Newly synthesized dyes were applied to polyester fabric as disperse dyes in which their color measurements and fastness properties were evaluated. These dyes showed generally red to blue shifted color with high extinction coefficient in comparison with aniline-based azo dyes. The antitumor activity of the synthesized dyes was evaluated. The results showed clearly that most of them exhibited good activity and compounds 5c and 5d exhibited moderate activity.

  5. Growth Kinetics of Rhodococcus Erythropolis IGTS8 on Thiophene and Dimethylsulphoxide

    International Nuclear Information System (INIS)

    El-Temtamy, S.A.; Farahat, L.A.; Al-Shatnawi, D.F.; AI-Sayed, S.

    2004-01-01

    Sulfur oxides emissions through fossil fuel combustion posse environmental problems because these oxides are major cause of acid rain, which dissolve buildings, kills forests and poisons lakes. That is why world environmental regulations are becoming harder with respect to sulfur content in fossil fuels. The demand for new low-cost desulfurization technologies has led to renewed interest in bio desulfurization. In this work the growth kinetics of Rhodococcus Erythopolis IGTS8 have been studied on two model sulfur compounds that are found among other sulfur compounds in petroleum fractions. These are namely thiophene and dimethyl sulfoxide, DEMSO. Batch reactor and different substrate concentrations ranging between 1 and 8 gl -1 were used to study the growth kinetics. Growth on thiophene was shown to follow Monode kinetics with μ m ax =0.064 h -1 and K s = 2.8 gl -1 , on the other hand, growth on DEMSO was found to be substrate inhibited

  6. Low band gap polymers based on 1,4-dialkoxybenzene, thiophene, bithiophene donors and the benzothiadiazole acceptor

    DEFF Research Database (Denmark)

    Carlé, Jon Eggert; Andreasen, Jens Wenzel; Jørgensen, Mikkel

    2010-01-01

    Four new copolymers of 1,4-dialkoxybenzene, thiophene, bithiophene and benzothiadiazole have been prepared and investigated for optical properties and in photovoltaic devices. The structures were chosen to show the effect of successively introducing an acceptor moiety, longer alkoxy side chains...... and finally, substituting thiophene for bithiophene. The absorption spectra and IPCE showed that these are low band gap polymers that can harvest light in the visible spectrum (400 to 700 nm) and that photoelectrons are generated in the whole range. The photovoltaic devices produced short circuit current...

  7. The cobalt-mediated [2+2+2]cycloaddition of thiophenes and benzofurans to alkynes

    Energy Technology Data Exchange (ETDEWEB)

    Malaska, M.J.

    1991-01-01

    The cobalt-mediated [2+2+2]cycloaddition of thiophenes and benzofurans to alkynes was investigated. The cocyclization of 2-propynyloxymethylthiophenes provided two types of cyclohexadiene complexes. It was found that one of these complexes could be converted to the other by a thermal rearrangement. This novel transformation was investigated by deuterium-labelling and kinetic studies, and a mechanism was proposed. The complexes could be oxidatively demetallated to provide the liberated organic framework. Further reorganization of these dienes were observed during the decomplexation process and in the presence of CpCo(C[sub 2]H[sub 4])[sub 2]. In this manner several new heterocyclic ring systems could be constructed from 2-substituted thiophenes. Following the success of the thiophene cyclizations, the cocyclization of the benzofuran nucleus was examined. Reagents and conditions were developed that provide an efficient synthesis of alkynols from carboxylic acids; other functional group interconversions of the alkynols were briefly studied. The synthesis and cyclization of 1-[7-methoxy-4-benzofuranyl]-3-butyn-2-ol produced a cobalt complex containing the A,B,C, and D rings of the morphine skeleton. A synthetic advantage of this methodology would be the ease of substitution at pharmaco-logically relevant C-6 and C-7 positions of the morphine framework. Synthetic routes using a cobalt cyclization strategy were proposed.

  8. In vitro production of thiophenes using hairy root cultures of Tagetes ...

    African Journals Online (AJOL)

    Marigold (Tagetes spp.) is a source of thiophenes, which are a group of heterocyclic sulfurous compounds possessing strong biocidal activity, thus making Tagetes plants very useful as natural source of agents for controlling pathogens such as nematodes, insects, fungi and bacteria. Hairy root cultures of Tagetes erecta L.

  9. Effects of Temperature and Acidic Pre-Treatment on Fenton-Driven Oxidation of MTBE-Spent Granular Activated Carbon

    Science.gov (United States)

    Temperature-dependent mechanisms in the Fenton-driven chemical oxidation of methyl tert-butyl ether (MTBE)-spent granular activated carbon (GAC) was investigated. Prior to iron (Fe) amendment to the GAC, acid-treatment altered the surface chemistry of the GAC and lowered the pH ...

  10. 1,1,1-Tris(dimethylamino-2-[tris(dimethylaminophosphoranylidene]diphosphinium tetraphenylborate tetrahydrofuran monosolvate

    Directory of Open Access Journals (Sweden)

    Bobby D. Ellis

    2014-06-01

    Full Text Available In the tetrahydrofuran solvate of the title salt, C12H36N6P3+·C24H20B−·C4H8O, the cation features short P—P bond lengths [2.1111 (11 and 2.1364 (10 Å] and a distinctly bent P—P—P angle [104.67 (4°] that confirm that the molecule is not allene-like. In the crystal, the solvent molecule is linked to the cation via a weak C—H...O hydrogen bond.

  11. Electron-Poor Thiophene 1,1-Dioxides: Synthesis, Characterization, and Application as Electron Relays in Photocatalytic Hydrogen Generation.

    Science.gov (United States)

    Tsai, Chia-Hua; Chirdon, Danielle N; Kagalwala, Husain N; Maurer, Andrew B; Kaur, Aman; Pintauer, Tomislav; Bernhard, Stefan; Noonan, Kevin J T

    2015-08-03

    The synthesis and characterization of electron-poor thiophene 1,1-dioxides bearing cyanated phenyl groups are reported. The electron-accepting nature of these compounds was evaluated by cyclic voltammetry, and highly reversible and facile reductions were observed for several derivatives. Moreover, some of the reduced thiophene dioxides form colorful anions, which were investigated spectroelectrochemically. Photoluminescence spectra of the electron-deficient sulfones were measured in CH2 Cl2, and they emit in the blue-green region with significant variation in the quantum yield depending on the aryl substituents. By expanding the degree of substitution on the phenyl rings, quantum yields up to 34 % were obtained. X-ray diffraction data are reported for two of the thiophene 1,1-dioxides, and the electronic structure was probed for all synthesized derivatives through DFT calculations. The dioxides were also examined as electron relays in a photocatalytic water reduction reaction, and they showed potential to boost the efficiency. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. Selective determination of semi-volatile thiophene compounds in water by molecularly imprinted polymer thin films with direct headspace gas chromatography sulfur chemiluminescence detection.

    Science.gov (United States)

    Hijazi, Hassan Y; Bottaro, Christina S

    2018-02-26

    Water-compatible molecularly imprinted polymer (MIP) thin films are coupled with headspace gas chromatography sulfur chemiluminescence detection (HS-GC-SCD) to create a new approach for the determination of trace concentrations of thiophene compounds in water samples. Thiophene compounds are persistent, typically petrogenic, organic pollutants of concern due to their potential for biomagnification and bioaccumulation, mutagenicity, and carcinogenicity in terrestrial and aquatic fauna. Identification and quantitation in water, particularly following oil spills, is a priority. Following adsorption of the thiophenes to the MIPs, the MIP-bound analytes are analyzed directly by HS-GC-SCD, with minimal sample manipulation and virtually no organic solvent. Calibration curves of spiked seawater were linear from 5 μg L -1 to 100 μg L -1 and limits of detection (LOD) were in the range of 0.24-0.82 μg L -1 . Low matrix effects were observed in the analysis of thiophene compounds in seawater making the method suitable for use in fresh and saline waters without modification. Acceptable reproducibility was obtained for analysis of thiophene compounds from spiked seawater samples at RSDs ≤7.0% (n = 3).

  13. Fixation of carbon dioxide into dimethyl carbonate over titanium-based zeolitic thiophene-benzimidazolate framework

    Data.gov (United States)

    U.S. Environmental Protection Agency — A titanium-based zeolitic thiophene-benzimidazolate framework has been designed for the direct synthesis of dimethyl carbonate (DMC) from methanol and carbon...

  14. ANAEROBIC DEGRADATION OF MTBE TO TBA IN GROUND WATER AT GASOLINE SPILL SITES IN ORANGE COUNTY, CALIFORNIA

    Science.gov (United States)

    Although tert-Butyl Alcohol (TBA) has not been used as a fuel oxygenate in Orange County, California, the concentrations of TBA in ground water at gasoline spill sites are high compared to the concentrations of the conventional fuel oxygenate Methyl tert-Butyl Ether (MTBE). In t...

  15. Anaerobic degradation of a mixture of MtBE, EtBE, TBA, and benzene under different redox conditions

    NARCIS (Netherlands)

    Waals, van der Marcelle J.; Pijls, Charles; Sinke, Anja J.C.; Langenhoff, Alette A.M.; Smidt, Hauke; Gerritse, Jan

    2018-01-01

    The increasing use of biobased fuels and fuel additives can potentially change the typical fuel-related contamination in soil and groundwater. Anaerobic biotransformation of the biofuel additive ethyl tert-butyl ether (EtBE), as well as of methyl tert-butyl ether (MtBE), benzene, and tert-butyl

  16. Fenton-driven regeneration of MTBE-spent granular activated carbon - Effects of particle size and Iron Amendment Procedures

    Science.gov (United States)

    Fenton-driven regeneration of spent granular activated carbon (GAC) is a technology being developed to regenerate organic contaminant-spent GAC. Here, the effect of GAC particle size (>2 mm to <0.35 mm) on Fenton-driven oxidation of methyl tert-butyl ether (MTBE)-spent GAC was ev...

  17. Antimalarial Activity of Acetylenic Thiophenes from Echinops hoehnelii Schweinf

    Directory of Open Access Journals (Sweden)

    Helen Bitew

    2017-11-01

    Full Text Available Malaria is one of the world’s most severe endemic diseases and due to the emergence of resistance to the currently available medicines, the need for new targets and relevant antimalarial drugs remains acute. The crude extract, four solvent fractions and two isolated compounds from the roots of Echinops hoehnelii were tested for their antimalarial activity using the standard four-day suppressive method in Plasmodium berghei-infected mice. The 80% methanol extract exhibited suppression of 4.6%, 27.8%, 68.5% and 78.7% at dose of 50, 100, 200 and 400 mg/kg respectively. The dichloromethane fraction displayed chemosuppression of 24.9, 33.5 and 43.0% dose of 100, 200 and 400 mg/kg of body weight. Five acetylenicthiophenes were isolated from the dichloromethane fraction of which 5-(penta-1,3-diynyl-2-(3,4-dihydroxybut-1-ynyl-thiophene decreased the level of parasitaemia by 43.2% and 50.2% while 5-(penta-1,3-diynyl-2-(3-chloro-4-acetoxy-but-1-yn-thiophene suppressed by 18.8% and 32.7% at 50 and 100 mg/kg, respectively. The study confirmed the traditional claim of the plant to treat malaria and could be used as a new lead for the development of antimalarial drugs.

  18. TOXICITY OF METHYL-TERT BYTYL ETHER (MTBE) TO PLANTS (AVENA SATIVA, ZEA MAYS, TRITICUM AESTIVUM, AND LACTUCA SATIVA)

    Science.gov (United States)

    Effects of Methyl tert-butyl ether (MTBE) on the germination of seeds and growth of the plant were studied in some laboratory experiments. Test plants were wild oat (Avena sative), sweet corn (Zea mays), wheat (Triticum aestivum), and lettuce (Lactuca sativa). Seed germination,...

  19. Valorisation de la coupe C4 de vapocraquage via l'hydrogénation du butadiène, l'isomérisation des butènes et la métathèse, en MTBE ou en propylène Upgrading the C4 Cut from Steam Cracking via the Hydrogenation of Butadiene, the Isomerization of Butenes and Metathesis Into Mtbe Or Propylene

    Directory of Open Access Journals (Sweden)

    Chaumette S.

    2006-11-01

    Full Text Available Le surplus de butadiène au niveau mondial contraint les pétrochimistes à recycler la coupe C4 au vapocraqueur. De plus en plus, le butadiène est hydrogéné avant de recraquer toute la coupe. Une fois hydrogénée, cette coupe peut être beaucoup mieux valorisée, soit en MTBE avec isomérisation des n-butènes (procédé ISO-4, soit en propylène et MTBE en utilisant le procédé META-4. L'étude technico-économique montre que cette dernière voie offre la meilleure rentabilité (TRI = 21,5 %. Si le vapocraqueur est intégré à une raffinerie, les butènes peuvent également être transformés en alkylats ou en MTBE, pour répondre à une demande en octane ou en oxygénés pour les carburants. Ces diverses voies de valorisation sont plus intéressantes que la production de MTBE à partir des butanes via la déshydrogénation de l'isobutane ou que la production du propylène par déshydrogénation du propane. Une étude de sensibilité aux différents prix des produits envisagés permet d'établir des courbes d'isorentabilités, délimitant des zones de prix favorables à l'un ou l'autre des produits, pris deux à deux. The evolution of the outlets for C4 cuts from steam cracking shows quite contradictory results. On one hand, European and Asian petrochemists are more constrained to recycle this type of effluent, which contains butadiene and isobutene, to the steam cracker. Likewise, the demand for isobutene for MTBE production is such that it has to be produced by the dehydrogenation of isobutane. This situation is effectively caused by the surplus of butadiene, a by-product of ethylene, and for which the demand is not increasing as fast as the demand for ethylene. To improve cracking performances during the recycling of the C4 Cut, butadiene is more and more selectively hydrogenated. Under these conditions, rather than cracking it, the new processes could make it possible to better upgrade it. Indeed, after selective hydrogenation, most

  20. Pharmacological Classification and Activity Evaluation of Furan and Thiophene Amide Derivatives Applying Semi-Empirical ab initio Molecular Modeling Methods

    Directory of Open Access Journals (Sweden)

    Leszek Bober

    2012-05-01

    Full Text Available Pharmacological and physicochemical classification of the furan and thiophene amide derivatives by multiple regression analysis and partial least square (PLS based on semi-empirical ab initio molecular modeling studies and high-performance liquid chromatography (HPLC retention data is proposed. Structural parameters obtained from the PCM (Polarizable Continuum Model method and the literature values of biological activity (antiproliferative for the A431 cells expressed as LD50 of the examined furan and thiophene derivatives was used to search for relationships. It was tested how variable molecular modeling conditions considered together, with or without HPLC retention data, allow evaluation of the structural recognition of furan and thiophene derivatives with respect to their pharmacological properties.

  1. Current’s Fluctuations through Molecular Wires Composed of Thiophene Rings

    Directory of Open Access Journals (Sweden)

    Judith Helena Ojeda Silva

    2018-04-01

    Full Text Available We study theoretically the electronic transport and quantum fluctuations in single-molecule systems using thiophene rings as integrated elementary functions, as well as the dependence of these properties with the increase of the coupled rings, i.e., as a quantum wire. In order to analyze the current flow through these molecular systems, the thiophene rings are considered to be connected to metal contacts, which, in general terms, will be related to the application of voltages (bias voltages or gate voltages to generate non-equilibrium behavior between the contacts. Due to the nonlinear behavior that is generated when said voltages are applied, it is possible to observe quantum fluctuations in the transport properties of these molecular wires. For the calculation of the transport properties, we applied a tight-binding approach using the Landauer–Büttiker formalism and the Fischer–Lee relationship, by means of a semi-analytic Green’s function method within a real-space renormalization (decimation procedure. Our results showed an excellent agreement with results using a tight-binding model with a minimal number of parameters reported so far for these molecular systems.

  2. Charge Delocalization in Oligomers of Poly(2,5-bis(3-alkylthiophene-2-yl)thieno[3,2-b]thiophene), PBTTT

    KAUST Repository

    Zhang, Yuexing

    2016-04-25

    We investigate theoretically charge delocalization in radical-cations, i.e., positive polarons, formed on oligomer chains of poly(2,5-bis(3-alkylthiophene-2-yl)thieno[3,2-b]thiophene), PBTTT. We use non-empirically tuned range-separated density functionals (TRS-DFT), including LC-ωPBE, LC-BLYP, and ωB97XD. We consider the evolution with oligomer length of the molecular geometric and electronic structures, optical absorption features, and spin densities. The TRS-DFT results indicate that a positive polaron can delocalize ideally over some 10 thiophene rings when the backbone is non-planar and up to 14 rings for a backbone forced to be completely planar. Interestingly, up to six polarons can co-exist side-by-side in a hexamer (which contains 24 thiophene rings), which is consistent with the highest degrees of doping (oxidation) experimentally achievable in polythiophene derivatives.

  3. Charge Delocalization in Oligomers of Poly(2,5-bis(3-alkylthiophene-2-yl)thieno[3,2-b]thiophene), PBTTT

    KAUST Repository

    Zhang, Yuexing; Steyrleuthner, Robert; Bredas, Jean-Luc

    2016-01-01

    We investigate theoretically charge delocalization in radical-cations, i.e., positive polarons, formed on oligomer chains of poly(2,5-bis(3-alkylthiophene-2-yl)thieno[3,2-b]thiophene), PBTTT. We use non-empirically tuned range-separated density functionals (TRS-DFT), including LC-ωPBE, LC-BLYP, and ωB97XD. We consider the evolution with oligomer length of the molecular geometric and electronic structures, optical absorption features, and spin densities. The TRS-DFT results indicate that a positive polaron can delocalize ideally over some 10 thiophene rings when the backbone is non-planar and up to 14 rings for a backbone forced to be completely planar. Interestingly, up to six polarons can co-exist side-by-side in a hexamer (which contains 24 thiophene rings), which is consistent with the highest degrees of doping (oxidation) experimentally achievable in polythiophene derivatives.

  4. The Chemistry and Flow Dynamics of Molecular Biological Tools Used to Confirm In Situ Bioremediation of Benzene, TBA, and MTBE

    Science.gov (United States)

    North, K. P.; Mackay, D. M.; Scow, K. M.

    2010-12-01

    In situ bioremediation has typically been confirmed by collecting sediment and groundwater samples to directly demonstrate a degradation process in a laboratory microcosm. However, recent advances in molecular biological tools present options for demonstrating degradation processes with field-based tools that are less time-consuming. We have been investigating the capability of some of these molecular biological tools to evaluate in situ biodegradation of tert-butyl alcohol (TBA), methyl tert-butyl ether (MTBE), and benzene at two field sites in California. At both sites, we have deployed Bio-Traps® (“traps”), made of Bio-Sep® beads in slotted PVC pipe, which provide ideal environments for microbial colonization. Stable Isotope Probing can be accomplished by sorbing the13C-labeled organic contaminant of concern onto Bio-Sep® beads (“baiting”); incorporation of 13C into the biomass collected by the trap would indicate that the microbial community was capable of degrading the labeled compound. In addition, we examined the chemistry and flow dynamics of these traps and present those results here. We performed a field experiment and a lab experiment to, in part, define the rate that different baits leached off various traps. At a TBA- and MTBE-contaminated site at Vandenberg AFB, Lompoc, CA, the TBA-dominant plume was effectively treated by recirculation/oxygenation of groundwater, decreasing TBA and MTBE concentrations to detection limits along predicted flowpaths created by two pairs of recirculation wells. We used the generated aerobic treatment zone to deploy traps baited with 13C-labeled MTBE or TBA in a novel, ex situ experimental setup. The groundwater flow extracted from the aerobic treatment zone was split through several chambers, each containing a trap and monitoring of influent and effluent. The chamber effluent was measured throughout a six-week deployment and analyzed for both TBA and MTBE; the majority of mass leached from the baited traps did

  5. Intrinsic bioremediation of a BTEX and MTBE plume under mixed aerobic/denitrifying conditions

    International Nuclear Information System (INIS)

    Borden, R.C.; Daniel, R.A.

    1995-01-01

    A shallow Coastal Plain aquifer in rural Sampson Country, North Carolina, has been contaminated with petroleum hydrocarbon from a leaking underground storage tank containing gasoline.An extensive field characterization has been performed to define the horizontal and vertical distribution of soluble gasoline components and indicator parameters. A plume of dissolved methyl tert-butyl ether (MTBE) and the aromatic hydrocarbons benzene, toluene, ethylbenzene, and xylene isomers (BTEX) is present in the aquifer and has migrated over 600 ft from the source area. Background dissolved oxygen concentrations range from 7 to 8 mg/L, and nitrate concentrations range from 5 to 22 mg/L as N due to extensive fertilization of fields surrounding the spill. In the center of the BTEX plume, oxygen concentrations decline to less than 1 mg/L while nitrate concentrations remain high. The total mass flux of MTBE and all BTEX components decline with distance downgradient relative to a conservative tracer (chloride). At the source, the total BTEX concentration exceeds 75 mg/L while 130 ft downgradient, total BTEX concentrations are less than 4.9 mg/L, a 15-fold reduction. Toluene and ethylbenzene decline most rapidly followed by m-p-xylene, o-xylene and finally benzene. Biodegradation of TEX appears to be enhanced by the excess nitrate present in the aquifer while benzene biodegradation appears to be due to strictly aerobic processes

  6. The performance of pelletized Ce-Y and Ni-Y zeolites for removal of thiophene from model gasoline solutions

    Energy Technology Data Exchange (ETDEWEB)

    Montazerolghaem, Maryam; Seyedeyn-Azad, Fakhry; Rahimi, Amir [University of Isfahan, Isfahan (Iran, Islamic Republic of)

    2015-02-15

    H-Y zeolite was prepared with Na-Y zeolite via ion-exchange method. Ni-Y and Ce-Y zeolites were then prepared with H-Y zeolite via solid-state ion-exchange (SSIE) method. The pellet form of the zeolites was employed for removal of thiophene from samples containing 194, 116 and 72 ppmw sulfur in a batch system at ambient condition. The removal of sulfur over the three types of the adsorbents decreased according to the following order: Ce-Y (81..7%)>Ni-Y (75.2%)>Na-Y (51.7%), indicating that the Ce-Y zeolite was the most effective adsorbent for removing of sulfur compounds from gasoline. Adsorption isotherms of thiophene on Ni-Y and Ce-Y zeolites were obtained and correlated with six well-known isotherms. The equilibrium data of thiophene adsorption were well fitted to the isotherms and the corresponding parameters and fitting error criteria of the isotherm equations were obtained.

  7. The performance of pelletized Ce-Y and Ni-Y zeolites for removal of thiophene from model gasoline solutions

    International Nuclear Information System (INIS)

    Montazerolghaem, Maryam; Seyedeyn-Azad, Fakhry; Rahimi, Amir

    2015-01-01

    H-Y zeolite was prepared with Na-Y zeolite via ion-exchange method. Ni-Y and Ce-Y zeolites were then prepared with H-Y zeolite via solid-state ion-exchange (SSIE) method. The pellet form of the zeolites was employed for removal of thiophene from samples containing 194, 116 and 72 ppmw sulfur in a batch system at ambient condition. The removal of sulfur over the three types of the adsorbents decreased according to the following order: Ce-Y (81..7%)>Ni-Y (75.2%)>Na-Y (51.7%), indicating that the Ce-Y zeolite was the most effective adsorbent for removing of sulfur compounds from gasoline. Adsorption isotherms of thiophene on Ni-Y and Ce-Y zeolites were obtained and correlated with six well-known isotherms. The equilibrium data of thiophene adsorption were well fitted to the isotherms and the corresponding parameters and fitting error criteria of the isotherm equations were obtained

  8. Crystal structures of (Z-5-[2-(benzo[b]thiophen-2-yl-1-(3,5-dimethoxyphenylethenyl]-1H-tetrazole and (Z-5-[2-(benzo[b]thiophen-3-yl-1-(3,4,5-trimethoxyphenylethenyl]-1H-tetrazole

    Directory of Open Access Journals (Sweden)

    Narsimha Reddy Penthala

    2016-05-01

    Full Text Available (Z-5-[2-(Benzo[b]thiophen-2-yl-1-(3,5-dimethoxyphenylethenyl]-1H-tetrazole methanol monosolvate, C19H16N4O2S·CH3OH, (I, was prepared by the reaction of (Z-3-(benzo[b]thiophen-2-yl-2-(3,5-dimethoxyphenylacrylonitrile with tributyltin azide via a [3 + 2]cycloaddition azide condensation reaction. The structurally related compound (Z-5-[2-(benzo[b]thiophen-3-yl-1-(3,4,5-trimethoxyphenylethenyl]-1H-tetrazole, C20H18N4O3S, (II, was prepared by the reaction of (Z-3-(benzo[b]thiophen-3-yl-2-(3,4,5-trimethoxyphenylacrylonitrile with tributyltin azide. Crystals of (I have two molecules in the asymmetric unit (Z′ = 2, whereas crystals of (II have Z′ = 1. The benzothiophene rings in (I and (II are almost planar, with r.m.s deviations from the mean plane of 0.0084 and 0.0037 Å in (I and 0.0084 Å in (II. The tetrazole rings of (I and (II make dihedral angles with the mean planes of the benzothiophene rings of 88.81 (13 and 88.92 (13° in (I, and 60.94 (6° in (II. The dimethoxyphenyl and trimethoxyphenyl rings make dihedral angles with the benzothiophene rings of 23.91 (8 and 24.99 (8° in (I and 84.47 (3° in (II. In both structures, molecules are linked into hydrogen-bonded chains. In (I, these chains involve both tetrazole and methanol, and are parallel to the b axis. In (II, molecules are linked into chains parallel to the a axis by N—H...N hydrogen bonds between adjacent tetrazole rings.

  9. Electrochemical properties of novel organodisulfide poly 1,2-bis(thiophen-3-ylmethyl)disulfane as cathode material for secondary lithium batteries

    International Nuclear Information System (INIS)

    Weng, Guoming; Su, Yuzhi; Liu, Zhaoqing; Zhang, Jianhua; Dong, Wen; Xu, Changwei

    2009-01-01

    We successfully synthesized a new organodisulfide poly 1,2-bis(thiophen-3-ylmethyl)disulfane by a facile preparation method. The types of the chemical groups of poly-3-thienylthiophene were characterized by Fourier transform infrared spectroscopy (FTIR). The electrochemical properties of S-S bonds redox behavior in the organodisulfides were investigated in CH 3 CN/0.1 M [Bu 4 N] [PF 6 ] solution. The separation of the anodic and cathodic peak potentials for poly 1,2-bis(thiophen-3-ylmethyl)disulfane is 180 mV. The results indicated that poly 1,2-bis(thiophen-3-ylmethyl)disulfane has an excellent electrochemical reversibility. The average specific capacity of 230 mAh g -1 for poly-3-thienylthiophene is about 2 times higher than that of LiCoO 2 .

  10. Antifungal activity of synthetic di(hetero)arylamines based on the benzo[b]thiophene moiety.

    Science.gov (United States)

    Pinto, Eugénia; Queiroz, Maria-João R P; Vale-Silva, Luís A; Oliveira, João F; Begouin, Agathe; Begouin, Jeanne-Marie; Kirsch, Gilbert

    2008-09-01

    The antifungal activity of several di(hetero)arylamine derivatives of the benzo[b]thiophene system was evaluated against clinically relevant Candida, Aspergillus, and dermatophyte species by a broth macrodilution test based on CLSI (formerly NCCLS) guidelines. The most active compound showed a broad spectrum of activity (against all tested fungal strains, including fluconazole-resistant fungi), with particularly low MICs for dermatophytes. Results from the inhibition of the dimorphic transition in Candida albicans and flow cytometry studies further confirmed their biological activity. With this study it was possible to establish some structure-activity relationships (SARs). The hydroxy groups proved to be essential for the activity in the aryl derivatives. Furthermore, the spectrum of activity in the pyridine derivatives was broadened by the absence of the ester group on position 2 of the benzo[b]thiophene system.

  11. Desulfurization from thiophene by SO42-/ZrO2 catalytic oxidation at room temperature and atmospheric pressure

    International Nuclear Information System (INIS)

    Wang Bo; Zhu Jianpeng; Ma Hongzhu

    2009-01-01

    Thiophene, due to its poison, together with its combustion products which causes air pollution and highly toxic characteristic itself, attracted more and more attention to remove from gasoline and some high concentration systems. As the purpose of achieving the novel method of de-thiophene assisted by SO 4 2- /ZrO 2 (SZ), three reactions about thiophene in different atmosphere at room temperature and atmospheric pressure were investigated. SO 4 2- /ZrO 2 catalyst were synthesized and characterized by X-ray photoelectron spectroscopy (XPS), Fourier transformation infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and scanning electron microscope (SEM). The products were detected by gas chromatography-mass spectrometry (GC-MS). XP spectra show that ozone-catalyst system (SZO) have two forms of sulfur element (S 6+ and S 2- ) on the catalyst surface, which distinguished from that of air-catalyst system (SZA) and blank-catalyst system (SZB) (S 6+ ). And the results of GC-MS exhibited that some new compounds has been produced under this extremely mild condition. Especially, many kinds of sulfur compounds containing oxygen, that is easier to be extracted by oxidative desulfurization (ODS), have been detected in the SZA-1.5 h and SZB-3 h system. In addition, some long chain hydrocarbons have also been detected. While in SZO-0.5 h system, only long chain hydrocarbons were found. The results show that total efficiency of desulfurization from thiophene with ozone near to 100% can be obtained with the SO 4 2- /ZrO 2 catalytic oxidation reaction

  12. An overview of benzo[b]thiophene-based medicinal chemistry.

    Science.gov (United States)

    Keri, Rangappa S; Chand, Karam; Budagumpi, Srinivasa; Balappa Somappa, Sasidhar; Patil, Siddappa A; Nagaraja, Bhari Mallanna

    2017-09-29

    Among sulfur containing heterocycles, benzothiophene and its derivatives are at the focus as these candidates have structural similarities with active compounds to develop new potent lead molecules in drug design. Benzo[b]thiophene scaffold is one of the privileged structures in drug discovery as this core exhibits various biological activities allowing them to act as anti-microbial, anti-cancer, anti-inflammatory, anti-oxidant, anti-tubercular, anti-diabetic, anti-convulsant agents and many more. Further, numerous benzothiophene-based compounds as clinical drugs have been extensively used to treat various types of diseases with high therapeutic potency, which has led to their extensive developments. Due to the wide range of biological activities of benzothiophene, their structure activity relationships (SAR) have generated interest among medicinal chemists, and this has culminated in the discovery of several lead molecules against numerous diseases. The present review is endeavoring to highlight the progress in the various pharmacological activities of benzo[b]thiophene derivatives. It is hoped that this review will be helpful for new thoughts in the quest for rational designs of more active and less toxic benzothiophene-based medicinal drugs, as well as more effective diagnostic agents and pathologic probes. Also, SAR studies that highlight the chemical groups responsible for evoking the potential activities of benzothiophene derivatives are studied and compared. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

  13. Synthesis of poly (3-hexyl thiophene-2,5-diyl) in presence of CdS nanoparticles: microscopic and spectroscopic studies

    Energy Technology Data Exchange (ETDEWEB)

    Nicho, M. E.; Jaimes, W. [Universidad Autonoma del Estado de Morelos, Centro de Investigacion en Ingenierias y Ciencias Aplicadas, Av. Universidad 1001, Col. Chamilpa, 62209 Cuernavaca, Morelos (Mexico); Rivas A, M. E.; Quevedo L, M. A. [University of Texas at Dallas, Department of Materials Science and Engineering, 800 West Campbell Road, Richardson, Texas 75252 (United States); Hu, H., E-mail: menicho@uaem.mx [UNAM, Instituto de Energias Renovables, 62580 Temixco, Morelos (Mexico)

    2017-11-01

    In this paper, the synthesis of nano composites of poly(3-hexyl thiophene-2,5-diyl) (P3HT) and cadmium sulfide (CdS) nanoparticles are reported. CdS nanoparticles were first synthesized using chemical precipitation. Then P3HT was synthesized by direct oxidation of 3-hexyl thiophene with FeCl{sub 3} as oxidant in presence of CdS nanoparticles. The goal of this work was to investigate the effect of the CdS nanoparticles during the synthesis of P3HT. The resulting films of P3HT/CdS nano composites were investigated by Fourier Transform Infrared Spectroscopy (Ft-IR), Ultraviolet-Visible Spectroscopy (UV-Vis), X-ray diffraction, Transmission electron microscopy (Tem), Atomic force microscopy (AFM) and Scanning electron microscopy (Sem). Homogeneous distribution of CdS nanoparticles in P3HT was demonstrated by Sem, AFM and Tem. Ft-IR analysis showed interaction between CdS and the S atoms of the thiophene rings. This result, together with UV-Vis spectra and XRD pattern suggest a better arrangement of the polymer chains. It is possible that the CdS nanoparticles are coupled with the unpaired electrons of S atoms in the thiophene rings through the positive delocalized charge, resulting in a more ordered P3HT polymer matrix with embedded CdS nanoparticles. (Author)

  14. Thiophene hydrodesulfurization over CoMo/Al2O3-CuY catalysts: Temperature effect study

    Directory of Open Access Journals (Sweden)

    Yamina Boukoberine

    2016-09-01

    Full Text Available CoMo/γ-Al2O3-CuY catalysts are prepared by physically mixing CoMo/γ-Al2O3 catalyst with Cu-exchanged Y zeolite. The CuY zeolite is prepared by the solid state ion exchange technique. The thiophene hydrodesulfurization is performed in a fixed bed reactor at high temperature and atmospheric pressure. The results show that the presence of CuY zeolite particles in CoMo/Al2O3 catalyst can have a noticeable effect on both the conversion and product selectivities. An increasing zeolite loading in catalyst results in a decrease of the thiophene HDS activity. This decrease is probably caused by the formation of heavy compounds and the deactivation of the zeolite at high temperatures.

  15. Low coercive field and conducting nanocomposite formed by Fe3O4 and poly(thiophene)

    International Nuclear Information System (INIS)

    Silva, R.A.; Santos, M.J.L.; Rinaldi, A.W.; Zarbin, A.J.G.; Oliveira, M.M.; Santos, I.A.; Cotica, L.F.; Coellho, A.A.; Rubira, A.F.; Girotto, E.M.

    2007-01-01

    Magnetite and poly(thiophene) composites have been produced by in situ monomer oxidation. Fourier transform infrared (FTIR) and X-ray diffraction (XRD) confirmed the presence of Fe 3 O 4 as particle agglomerates ranging from 15 to ca. 54 nm in size. Transmission electron micrographs (TEMs) revealed a face-to-face structure in both the pure magnetite and the nanocomposite. Typical superparamagnetic (ferrimagnetic) curves have been observed, whereas the relatively weak magnetic field employed in measurement, 200 Oe, was sufficient to split the curves completely. Zero field cooling (ZFC) and field cooling (FC) curves coincide only above room temperature, indicating that the characteristic blocking temperature (T B ) for superparamagnetic particles in this assembly is above room temperature. - Graphical abstract: TEM image of magnetite/poly(thiophene) nanocomposite

  16. Thiophene-fused tetracene diimide with low band gap and ambipolar behavior

    KAUST Repository

    Ye, Qun; Chang, Jingjing; Huang, Kuo-Wei; Chi, Chunyan

    2011-01-01

    The first tetracene diimide derivative fused with four thiophene rings, TT-TDI, was synthesized by an FeCl3 mediated oxidative cyclodehydrogenation reaction. TT-TDI exhibited a low band gap of 1.52 eV and amphoteric redox behavior. TT-TDI also showed a liquid crystalline property and ambipolar charge transport in thin film field-effect transistors. © 2011 American Chemical Society.

  17. Thiophene-fused tetracene diimide with low band gap and ambipolar behavior

    KAUST Repository

    Ye, Qun

    2011-11-18

    The first tetracene diimide derivative fused with four thiophene rings, TT-TDI, was synthesized by an FeCl3 mediated oxidative cyclodehydrogenation reaction. TT-TDI exhibited a low band gap of 1.52 eV and amphoteric redox behavior. TT-TDI also showed a liquid crystalline property and ambipolar charge transport in thin film field-effect transistors. © 2011 American Chemical Society.

  18. Holographic recording in thiophene-based polyester

    DEFF Research Database (Denmark)

    Matharu, Avtar Singh; Chambers-Asman, David; Jeeva, Shehzad

    2008-01-01

    The synthesis and optical data storage properties of a side-chain thiophene-phenyl azopolyester ThPhAzoP.ol is reported. The polyester is derived from diphenyl tetradecanedioate and a thiophenebased liquid crystalline diol which exhibits a short-lived enantiotropic SmA phase (Cryst 177.7 SmA 180.......4 I). The polyester ThPhAzoPol exhibits amorphous (Tg, 78.6 DC), crystalline and liquid crystalline character as evidenced by differential scanning calorimetry and thermal polarising microscopy. A grainy texture, which is thermally reversible, with increasing birefringence on cooling from...... the isotropic melt is observed. The polyester is amenable to optical data storage, showing efficient induced anisotropy, which is stable at room temperature. Polarisation gratings can be inscribed using orthogonally.linear and circularly polarised light to good effect (>10/0) and surface relief gratings...

  19. Occurrence and temporal variability of methyl tert-butyl ether (MTBE) and other volatile organic compounds in select sources of drinking water : results of the focused survey

    Science.gov (United States)

    Delzer, Gregory C.; Ivahnenko, Tamara

    2003-01-01

    The large-scale use of the gasoline oxygenate methyl tert-butyl ether (MTBE), and its high solubility, low soil adsorption, and low biodegradability, has resulted in its detection in ground water and surface water in many places throughout the United States. Studies by numerous researchers, as well as many State and local environmental agencies, have discovered high levels of MTBE in soils and ground water at leaking underground gasoline-storage-tank sites and frequent occurrence of low to intermediate levels of MTBE in reservoirs used for both public water supply and recreational boating.In response to these findings, the American Water Works Association Research Foundation sponsored an investigation of MTBE and other volatile organic compounds (VOCs) in the Nation's sources of drinking water. The goal of the investigation was to provide additional information on the frequency of occurrence, concentration, and temporal variability of MTBE and other VOCs in source water used by community water systems (CWSs). The investigation was completed in two stages: (1) reviews of available literature and (2) the collection of new data. Two surveys were associated with the collection of new data. The first, termed the Random Survey, employed a statistically stratified design for sampling source water from 954 randomly selected CWSs. The second, which is the focus of this report, is termed the Focused Survey, which included samples collected from 134 CWS source waters, including ground water, reservoirs, lakes, rivers, and streams, that were suspected or known to contain MTBE. The general intent of the Focused Survey was to compare results with the Random Survey and provide an improved understanding of the occurrence, concentration, temporal variability, and anthropogenic factors associated with frequently detected VOCs. Each sample collected was analyzed for 66 VOCs, including MTBE and three other ether gasoline oxygenates (hereafter termed gasoline oxygenates). As part of

  20. Synthesis of diastereomerically and enantiomerically pure 2,3-disubstituted tetrahydrofurans using a sulfoxonium ylide.

    Science.gov (United States)

    Schomaker, Jennifer M; Pulgam, Veera Reddy; Borhan, Babak

    2004-10-27

    Nucleophilic substitution reactions of 2,3-epoxy alcohols, easily prepared via Sharpless asymmetric epoxidation chemistry, offer access to a wide variety of enantiomerically pure compounds. In this communication, we describe the use of a Payne rearrangement to control regioselectivity in the ring-opening of a series of 2,3-epoxy alcohols with dimethylsulfoxonium methylide to yield diastereomerically and/or enantiomerically pure disubstituted tetrahydrofuran rings. The factors influencing the success and substitution pattern of the THF ring products are discussed, including steric, electronic, and solvent effects.

  1. Differential cross sections for electron-impact vibrational-excitation of tetrahydrofuran at intermediate impact energies

    Energy Technology Data Exchange (ETDEWEB)

    Do, T. P. T. [School of Chemical and Physical Sciences, Flinders University, GPO Box 2100, Adelaide, South Australia 5001 (Australia); School of Education, Can Tho University, Campus II, 3/2 Street, Xuan Khanh, Ninh Kieu, Can Tho City (Viet Nam); Duque, H. V. [School of Chemical and Physical Sciences, Flinders University, GPO Box 2100, Adelaide, South Australia 5001 (Australia); Departamento de Física, Universidade Federal de Juiz de Fora, 36036-330 Juiz de Fora, Minas Gerais (Brazil); Lopes, M. C. A. [Departamento de Física, Universidade Federal de Juiz de Fora, 36036-330 Juiz de Fora, Minas Gerais (Brazil); Konovalov, D. A.; White, R. D. [College of Science, Technology and Engineering, James Cook University, Townsville (Australia); Brunger, M. J., E-mail: michael.brunger@flinders.edu.au, E-mail: darryl.jones@flinders.edu.au [School of Chemical and Physical Sciences, Flinders University, GPO Box 2100, Adelaide, South Australia 5001 (Australia); Institute of Mathematical Sciences, University of Malaya, 50603 Kuala Lumpur (Malaysia); Jones, D. B., E-mail: michael.brunger@flinders.edu.au, E-mail: darryl.jones@flinders.edu.au [School of Chemical and Physical Sciences, Flinders University, GPO Box 2100, Adelaide, South Australia 5001 (Australia)

    2015-03-28

    We report differential cross sections (DCSs) for electron-impact vibrational-excitation of tetrahydrofuran, at intermediate incident electron energies (15-50 eV) and over the 10°-90° scattered electron angular range. These measurements extend the available DCS data for vibrational excitation for this species, which have previously been obtained at lower incident electron energies (≤20 eV). Where possible, our data are compared to the earlier measurements in the overlapping energy ranges. Here, quite good agreement was generally observed where the measurements overlapped.

  2. Desulfurization from thiophene by SO(4)(2-)/ZrO(2) catalytic oxidation at room temperature and atmospheric pressure.

    Science.gov (United States)

    Wang, Bo; Zhu, Jianpeng; Ma, Hongzhu

    2009-05-15

    Thiophene, due to its poison, together with its combustion products which causes air pollution and highly toxic characteristic itself, attracted more and more attention to remove from gasoline and some high concentration systems. As the purpose of achieving the novel method of de-thiophene assisted by SO(4)(2-)/ZrO(2) (SZ), three reactions about thiophene in different atmosphere at room temperature and atmospheric pressure were investigated. SO(4)(2-)/ZrO(2) catalyst were synthesized and characterized by X-ray photoelectron spectroscopy (XPS), Fourier transformation infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and scanning electron microscope (SEM). The products were detected by gas chromatography-mass spectrometry (GC-MS). XP spectra show that ozone-catalyst system (SZO) have two forms of sulfur element (S(6+) and S(2-)) on the catalyst surface, which distinguished from that of air-catalyst system (SZA) and blank-catalyst system (SZB) (S(6+)). And the results of GC-MS exhibited that some new compounds has been produced under this extremely mild condition. Especially, many kinds of sulfur compounds containing oxygen, that is easier to be extracted by oxidative desulfurization (ODS), have been detected in the SZA-1.5h and SZB-3h system. In addition, some long chain hydrocarbons have also been detected. While in SZO-0.5h system, only long chain hydrocarbons were found. The results show that total efficiency of desulfurization from thiophene with ozone near to 100% can be obtained with the SO(4)(2-)/ZrO(2) catalytic oxidation reaction.

  3. Synthesis and Characterization of New Thieno[3,2-b]thiophene Derivatives

    Directory of Open Access Journals (Sweden)

    Wojciech Pisula

    2012-10-01

    Full Text Available Three derivatives of thieno[3,2-b]thiophene end-capped with phenyl units have been synthesized and characterized by MALDI TOF mass spectroscopy, elemental analysis, UV-vis absorption spectroscopy and thermogravimetric analysis (TGA. All compounds were prepared using Pd-catalyzed Stille or Suzuki coupling reactions. Optical measurements and thermal analysis revealed that these compounds are promising candidates for p-type organic semiconductor applications.

  4. An Asymmetric Furan/Thieno[3,2-b]Thiophene Diketopyrrolopyrrole Building Block for Annealing-Free Green-Solvent Processable Organic Thin-Film Transistors.

    Science.gov (United States)

    Ding, Shang; Ni, Zhenjie; Hu, Mengxiao; Qiu, Gege; Li, Jie; Ye, Jun; Zhang, Xiaotao; Liu, Feng; Dong, Huanli; Hu, Wenping

    2018-06-21

    A new asymmetric furan and thieno[3,2-b]thiophene flanked diketopyrrolopyrrole (TTFDPP) building block for conjugated polymers is designed and used to generate a donor-acceptor semiconducting polymer, poly[3-(furan-2-yl)-2,5-bis(2-octyldodecyl)-6-(thieno[3,2-b]thiophen-2-yl)pyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione-alt-thieno[3,2-b]thiophene] (abbreviated to PTTFDPP-TT), consisting of TTFDPP unit copolymerized with thieno[3,2-b]thiophene comonomer (TT), which is further synthesized. Results demonstrate that PTTFDPP-TT-based thin-film transistors in a bottom-gate bottom-contact device configuration exhibit typical hole-transporting property, with weak temperature dependence for charge carrier mobility from room temperature to 200 °C. In addition, the good solubility of PTTFDPP-TT due to the incorporation of a polar furan unit and an asymmetric conjugated structure makes it able to be solution processed with a less toxic nonchlorinated solvent such as toluene, demonstrating comparable performance with that prepared from chlorinated solution. These results suggest PTTFDPP-TT as a promising organic semiconductor candidate for annealing-free, environmentally benign, and less energy-consuming applications in large-area flexible organic electronic devices. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. ADVANCED OXIDATION PROCESS TECHNOLOGY (ULTRAVIOLET RADIATION/OZONE TREATMENT) FOR REMOVAL OF METHYL TERTIARY BUTYL ETHER (MTBE) IN GROUND WATER SUPPLIES.

    Science.gov (United States)

    U.S. EPA’s Office of Research and Development in Cincinnati, Ohio has been testing and evaluating MTBE removal in dechlorinated tap water using three oxidant combinations: hydrogen peroxide/ozone, ultraviolet irradiation (UV)/ozone, and UV/ozone/hydrogen peroxide. Pilot-scale st...

  6. The melting curve of tetrahydrofuran hydrate in D2O

    International Nuclear Information System (INIS)

    Hanley, H.J.M.; Meyers, G.J.; White, J.W.; Sloan, E.D.

    1989-01-01

    Melting points for the tetrahydrofuran/D 2 O hydrate in equilibrium with the air-saturated liquid at atmospheric pressure are reported. The melting points were measured by monitoring the absorbance of the solution. Overall, the melting-point phase boundary curve is about 2.5 K greater than the corresponding curve for the H 2 O hydrate, with a congruent melting temperature of 281 ± 0.5 K at a D 2 O mole fraction of 0.936. The phase boundary is predicted to within 5% if the assumption is made that the THF occupancy in the D 2 O and H 2 O hydrates is the same. The authors measure an occupancy of 99.9%. The chemical potential of the empty lattice in D 2 O is estimated to be 5% greater than in H 2 O

  7. Antifungal activity of topical microemulsion containing a thiophene derivative

    Directory of Open Access Journals (Sweden)

    Geovani Pereira Guimarães

    2014-06-01

    Full Text Available Fungal infections have become a major problem of worldwide concern. Yeasts belonging to the Candida genus and the pathogenic fungus Cryptococcus neoformans are responsible for different clinical manifestations, especially in immunocompromised patients. Antifungal therapies are currently based on a few chemotherapeutic agents that have problems related to effectiveness and resistance profiles. Microemulsions are isotropic, thermodynamically stable transparent systems of oil, water and surfactant that can improve the solubilization of lipophilic drugs. Taking into account the need for more effective and less toxic drugs along with the potential of thiophene derivatives as inhibitors of pathogenic fungi growth, this study aimed to evaluate the antifungal activity of a thiophene derivative (5CN05 embedded in a microemulsion (ME. The minimum inhibitory concentration (MIC was determined using the microdilution method using amphotericin B as a control. The formulations tested (ME- blank and ME-5CN05 showed physico-chemical properties that would allow their use by the topical route. 5CN05 as such exhibited moderate or weak antifungal activity against Candida species (MIC = 270-540 µg.mL-1 and good activity against C. neoformans (MIC = 17 µg.mL-1. Candida species were susceptible to ME-5CN05 (70-140 µg.mL-1, but C. neoformans was much more, presenting a MIC value of 2.2 µg.mL-1. The results of this work proved promising for the pharmaceutical industry, because they suggest an alternative therapy against C. neoformans.

  8. Crystal structure of (E-N-phenyl-N′-[1-(thiophen-2-ylethylidene]formohydrazide

    Directory of Open Access Journals (Sweden)

    C. S. Dileep

    2014-09-01

    Full Text Available In the title compound, C13H12N2OS, the planes of the thiophene and phenyl rings are nearly perpendicular to each other, making a dihedral angle of 86.42 (12°. In the crystal, molecules are linked by C—H...O hydrogen bonds, forming a helical chain along the b-axis direction.

  9. Modeling the competitive effect of ammonium oxidizers and heterotrophs on the degradation of MTBE in a packed bed reactor

    DEFF Research Database (Denmark)

    Waul, Christopher Kevin; Arvin, Erik; Schmidt, Jens Ejbye

    2008-01-01

    A mathematical model was used to study effects on the degradation of methyl tert-butyl ether (MTBE) in a packed bed reactor due to the presence of contaminants such as ammonium, and the mix of benzene, toluene, ethylbenzene and xylenes (BTEX). It was shown that competition between the slower...

  10. Odour and flavour thresholds of gasoline additives (MTBE, ETBE and TAME) and their occurrence in Dutch drinking water collection areas

    NARCIS (Netherlands)

    van Wezel, A.; Puijker, L.; Vink, C.; Versteegh, A.; de Voogt, P.

    2009-01-01

    The use of ETBE (ethyl-tert-butylether) as gasoline additive has recently grown rapidly. Contamination of aquatic systems is well documented for MTBE (methyl-tert-butylether), but less for other gasoline additives. Due to their mobility they may easily reach drinking water collection areas. Odour

  11. Innovative reactive distillation process for the production of the MTBE substitute isooctane from isobutene

    Energy Technology Data Exchange (ETDEWEB)

    Chalakova, M. [Magdeburg Univ. (Germany). Process Systems Engineering; Kaur, R.; Mahajani, S. [Indian Inst. of Technology, Mumbai (India); Freund, H. [Max-Planck-Institute for Dynamics of Complex Technical Systems, Magdeburg (Germany); Sundmacher, K. [Magdeburg Univ. (Germany). Process Systems Engineering]|[Max-Planck-Institute for Dynamics of Complex Technical Systems, Magdeburg (Germany)

    2007-07-01

    Isooctane is a promising candidate to replace MTBE as gasoline additive if it can be produced in economically and environmentally efficient processes. A promising reaction way at mild conditions is the so called indirect alkylation of isobutene (IB). In the present work two innovative reactive distillation (RD) concepts where the reactions are carried out either simultaneously (fully integrated) or sequentially (partially integrated) are designed. Suitable operation conditions are identified and a comparison with the conventional process scheme under performance and economic aspects is carried out. (orig.)

  12. Measurement and correlation of vapour pressures of pyridine and thiophene with [EMIM][SCN] ionic liquid

    International Nuclear Information System (INIS)

    Khelassi-Sefaoui, Asma; Mutelet, Fabrice; Mokbel, Ilham; Jose, Jacques; Negadi, Latifa

    2014-01-01

    Highlights: • VLE of (pyridine + [EMIM][SCN]), or (thiophene + [EMIM][SCN]) binary mixtures were measured. • The investigated temperatures are 273 K to 363 K. • The PC-SAFT equation of state has been used to correlate the vapour pressures of the binary systems. - Abstract: In this work (vapour + liquid) equilibrium (VLE) measurements were performed on binary systems of the ionic liquid 1-ethyl-3-methylimidazolium thiocynate [EMIM][SCN] with thiophene or pyridine at pressures close to the atmospheric pressure using a static device at temperatures between 273 K and 363 K. Experimental data were correlated by the PC-SAFT EoS. The binary interaction parameters k ij were optimised on experimental VLE data. The results obtained for the two binary mixtures studied in this paper indicate that the PC-SAFT EoS can be used to represent systems containing ionic liquids

  13. MTBE and aromatic hydrocarbons in North Carolina stormwater runoff.

    Science.gov (United States)

    Borden, Robert C; Black, David C; McBlief, Kathleen V

    2002-01-01

    A total of 249 stormwater samples were collected from 46 different sampling locations in North Carolina over an approximate 1-year period and analyzed to identify land use types where fuel oxygenates and aromatic hydrocarbons may be present in higher concentrations and at greater frequency. Samples were analyzed by gas chromatography-mass spectrometry in ion selective mode to achieve a quantitation limit of 0.05 microg/l. m-,p-Xylene and toluene were detected in over half of all samples analyzed, followed by MTBE: o-xylene: 1,3,5-trimethylbenzene: ethylbenzene; and 1,2,4-trimethylbenzene. Benzene, DIPE, TAME and 1,2,3-trimethylbenzene were detected in runoff from a gas station or discharge of contaminated groundwater from a former leaking underground storage tank. For all of the aromatic hydrocarbons, the maximum observed contaminant concentrations were over an order of magnitude lower than current drinking water standards.

  14. Conductivity hysteresis in polymer electrolytes incorporating poly(tetrahydrofuran)

    Energy Technology Data Exchange (ETDEWEB)

    Akbulut, Ozge; Taniguchi, Ikuo; Mayes, Anne M. [Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA (United States); Kumar, Sundeep; Shao-Horn, Yang [Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA (United States)

    2007-01-01

    Conductivity hysteresis and room temperature ionic conductivities >10{sup -3}S/cm were recently reported for electrolytes prepared from blends of an amphiphilic comb copolymer, poly[2,5,8,11,14-pentaoxapentadecamethylene (5-hexadecyloxy-1,3-phenylene)] (polymer I), and a linear multiblock copolymer, poly(oligotetrahydrofuran-co-dodecamethylene) (polymer II), following thermal treatment [F. Chia, Y. Zheng, J. Liu, N. Reeves, G. Ungar, P.V. Wright, Electrochim. Acta 43 (2003) 1939]. To investigate the origin of these effects, polymers I and II were synthesized in this work, and the conductivity and thermal properties of the individual polymers were investigated. AC impedance measurements were conducted on I and II doped with LiBF{sub 4} or LiClO{sub 4} during gradual heating to 110{sup o}C and slow cooling to room temperature. Significant conductivity hysteresis was seen for polymer II, and was similarly observed for poly(tetrahydrofuran) (PTHF) homopolymer at equivalent doping levels. From thermogravimetric analysis (TGA), gel permeation chromatography (GPC) and {sup 1}H NMR spectroscopy, both polymer II and PTHF were found to partially decompose to THF during heat treatment, resulting in a self-plasticizing effect on conductivity. (author)

  15. Properties of LiBF4 and LiAsF6 solutions in mixtures of tetrahydrofuran and 2-methyltetrahydrofuran

    International Nuclear Information System (INIS)

    Plakhotnik, A.V.; Tovmash, N.F.; Mishustin, A.I.; Kokunov, Yu.V.

    1993-01-01

    Solutions of lithium tetrafluoroborate and hexafluoroarsenate in mixtures of tetrahydrofuran and 2-methyltetrahydrofuran were studies by the methods of conductometry, densimetry, viscosimetry and measurement of spin-lattice relaxation rate on 7 Li nuclei. Considerable ifluence of anion nature was ascertained. Assumptions are made on the presence of cooperative interaction involving formation of the structures from solvent molecules and salt ions

  16. Bioinorganic Relevance of Some Cobalt(II Complexes with Thiophene-2-glyoxal Derived Schiff Bases

    Directory of Open Access Journals (Sweden)

    Prashant Singh

    2009-01-01

    Full Text Available Complexes of Co(II with two new Schiff bases TEAB [2-hydroxy-4-{[2-oxo-2-(thiophen-2-ylethylidene]amino}benzoic acid] and TEPC [N-[2-oxo-2-(thiophen-2-ylethylidene]pyridine-3-carboxamide] have been synthesized and characterized with the help of elemental analysis, magnetic, mass, 1H-NMR, 13C-NMR, IR and electronic spectral data. IR spectra manifest the coordination of the ligand to the metal ion through the carbonyl oxygen, azomethine nitrogen and thienyl sulphur atoms. With the help of electronic spectral data various ligand field parameters were also calculated. All these studies reveal the distorted octahedral Co(II complexes. Synthesized compounds have also been screened against some micro organisms viz, Escherichia coli, Proteus vulgaris, Aspergillus niger and Aspergillus flavus with the help of ‘filter paper disc’ technique. It has been observed that the antimicrobial activities of metal complexes are higher than that of the free ligand.

  17. MTBE DEGRADATION USING FENTON'S REAGENT: THE EFFECT OF FERROUS AND FERRIC IRON MIXTURES ON THE EFFICIENCY OF THE OVERALL REACTION

    Science.gov (United States)

    The gasoline additive MTBE has been extensively used in the U.S. since the late 70's to increase the octane rating in reformulated gasoline, replacing toxic organo-lead compounds. However, its use was boosted during the late 80's, when the study of additional physico-chemical pro...

  18. Density functional theory studies on electronic properties of thiophene s oxides as aromatic dienophiles for reactivity prediction in diels-alder reactions

    International Nuclear Information System (INIS)

    Banjo, S.

    2013-01-01

    The reactivity of thiophene S-oxides was discussed with special emphasis on the use of thiophene S-oxides as dienophiles in Diels-Alder type reactions. The omega values obtained for thiophene S-oxide (TO) with electron-donating group (-CH/sub 3/) increased the nucleophilicity power whereas substitution with electron-withdrawing groups (such as -NO/sub 2/ and -CO/sub 2/CH/sub 2/CH/sub 3/) increased the electrophilicity power, indicating an increase of reactivity towards a nucleophiles. The higher the value of delta omega the more favourable the D-A process, therefore apart from (4+2) addition reactions of these TO as diene with the typical dienophiles like 1,2-dicyanoethene and 1,2-dicyanoethene, it could be possible for TO with strong electron withdrawing substituents to serve as dienophile, e.g. heterocycles Ie and If. Also, from the value of delta omega heterocycle 1d could involve in (4+2) addition reactions with heterocyles 1e and If. (author)

  19. Structure and photoconductivity in synthesized poly thiophene by plasma

    International Nuclear Information System (INIS)

    Enriquez, M.A.; Colin, E.; Cruz, G.J.; Olayo, M.G.; Ordonez, E.; Morales, J.; Olayo, R.; Romero, M.

    2006-01-01

    In this work the electric answer of poly thiophene is studied (PTh) to pulses of light to evaluate its luminescence potential. The synthesis of the polymers is made by plasma with different energy to study its effects on the structure of the material. The electric conductivity was calculated by means of the resistance of the polymers in a parallel arrangement of badges between 10 to 250 V, stimulated with ultraviolet light (250 nm) to promote the transfer of electric loads to different temperatures. The results indicate that the aromatic structure of the PTh depends on the power applied during the synthesis. (Author)

  20. PBE-DFT theoretical study of organic photovoltaic materials based on thiophene with 1D and 2D periodic boundary conditions

    Science.gov (United States)

    Saïl, K.; Bassou, G.; Gafour, M. H.; Miloua, F.

    2015-12-01

    Conjugated organic systems such as thiophene are interesting topics in the field of organic solar cells. We theoretically investigate π-conjugated polymers constituted by n units ( n = 1-11) based on the thiophene (Tn) molecule. The computations of the geometries and electronic structures of these compounds are performed using the density functional theory (DFT) at the 6-31 G( d, p) level of theory and the Perdew-Burke-Eenzerhof (PBE) formulation of the generalized gradient approximation with periodic boundary conditions (PBCs) in one (1D) and two (2D) dimensions. Moreover, the electronic properties (HOCO, LUCO, E gap, V oc, and V bi) are determined from 1D and 2D PBC to understand the effect of the number of rings in polythiophene. The absorption properties—excitation energies ( E ex), the maximal absorption wavelength (λmax), oscillator strengths, and light harvesting—efficiency are studied using the time-dependent DFT method. Our studies show that changing the number of thiophene units can effectively modulate the electronic and optical properties. On the other hand, our work demonstrates the efficiency of theoretical calculation in the PBCs.

  1. Kinetic of formation for single carbon dioxide and mixed carbon dioxide and tetrahydrofuran hydrates in water and sodium chloride aqueous solution

    NARCIS (Netherlands)

    Sabil, K.M.; Duarte, A.R.C.; Zevenbergen, J.F.; Ahmad, M.M.; Yusup, S.; Omar, A.A.; Peters, C.J.

    2010-01-01

    A laboratory-scale reactor system is built and operated to measure the kinetic of formation for single and mixed carbon dioxide-tetrahydrofuran hydrates. The T-cycle method, which is used to collect the kinetic data, is briefly discussed. For single carbon dioxide hydrate, the induction time

  2. Methyl tert-Butyl Ether (MTBE) - Its Movement and Fate in the Environment and Potential for Natural Attenuation

    Science.gov (United States)

    1999-10-01

    but at varying rates, by indigenous microbiota . Normal alkanes of low molecular weight (C-8 to C-22) are metabolized most rapidly, followed by...confirmed that TBA degradation occurred at a rate slower than MTBE degradation. Pure bacterial cultures isolated from activated sludge and the fruit of...isolated from activated sludge and fruit of the Gingko tree. They have been classified as belonging to the genuses Methlobacterium, Rhodococcus, and

  3. Acid-Base Equilibria of Some N-Substituted Thiophene-2-Carboxamidoximes in Non-Aqueous Media

    OpenAIRE

    DÜRÜST, Nedime

    2002-01-01

    The protonation constants of the amino nitrogens of some N-substituted thiophene-2-carboxamidoximes have been determined in acetic acid by means of potentiometric titration with perchloric acid. pKa values of the title compounds were interpreted on the basis of structural effects due to the substituents and the main skeleton.

  4. Electronic states of thiophene/phenylene co-oligomers: Extreme-ultra violet excited photoelectron spectroscopy observations and density functional theory calculations

    International Nuclear Information System (INIS)

    Kawaguchi, Yoshizo; Sasaki, Fumio; Mochizuki, Hiroyuki; Ishitsuka, Tomoaki; Tomie, Toshihisa; Ootsuka, Teruhisa; Watanabe, Shuji; Shimoi, Yukihiro; Yamao, Takeshi; Hotta, Shu

    2013-01-01

    We have investigated electronic states in the valence electron bands for the thin films of three thiophene/phenylene co-oligomer (TPCO) compounds, 2,5-bis(4-biphenylyl)thiophene (BP1T), 1,4-bis(5-phenylthiophen-2-yl)benzene (AC5), and 1,4-bis{5-[4-(trifluoromethyl)phenyl]thiophen-2-yl}benzene (AC5-CF 3 ), by using extreme-UV excited photoelectron spectroscopy (EUPS). By comparing both EUPS spectra and secondary electron spectra between AC5 and AC5-CF 3 , we confirm that CF 3 substitution to AC5 deepens valence states by 2 eV, and increases the ionization energy by 3 eV. From the cut-off positions of secondary electron spectra, the work functions of AC5, AC5-CF 3 , and BP1T are evaluated to be 3.8 eV, 4.8 eV, and 4.0 eV, respectively. We calculate molecular orbital (MO) energy levels by the density functional theory and compare results of calculations with those of experiments. Densities of states obtained by broadening MO levels well explain the overall features of experimental EUPS spectra of three TPCOs.

  5. Theoretical studies on the effect of benzene and thiophene groups on the charge transport properties of Isoindigo and its derivatives

    Science.gov (United States)

    Jia, Xu-Bo; Wei, Hui-Ling; Shi, Ya-Ting; Shi, Ya-Rui; Liu, Yu-Fang

    2017-12-01

    In this work, the charge transport properties of Isoindigo (II) and its derivatives which have the same hexyl chain were theoretically investigated by the Marcus-Hush theory combined with density functional theory (DFT). Here we demonstrate that the changes of benzene and thiophene groups in molecular structure have an important influence on the charge transport properties of organic semiconductor. The benzene rings of II are replaced by thiophenes to form the thienoisoindigo (TII), and the addition of benzene rings to the TII form the benzothienoisoindigo (BTII). The results show that benzene rings and thiophenes change the chemical structure of crystal molecules, which lead to different molecule stacking, thus, the length of hydrogen bond was changed. A shorter intermolecular hydrogen bond lead to tighter molecular stacking, which reduces the center-to-center distance and enhances the ability of charge transfer. At the same time, we theoretically demonstrated that II and BTII are the ambipolar organic semiconductor. BTII has better carrier mobility. The hole mobility far greater than electron mobility in TII, which is p-type organic semiconductor. Among all hopping path, we find that the distance of face-to-face stacking in II is the shortest and the electron-transport electronic coupling Ve is the largest, but II has not a largest anisotropic mobility, because the reorganization energy has a greater influence on the mobility than the electronic coupling. This work is helpful for designing ambipolar organic semiconductor materials with higher charge transport properties by introducing benzene ring and thiophene.

  6. 5-(Thiophen-2-ylmethyl-1,3,4-thiadiazol-2-amine

    Directory of Open Access Journals (Sweden)

    Jerry P. Jasinski

    2012-05-01

    Full Text Available In the title molecule, C7H7N3S2, the dihedral angle between the thiophene and thiadiazole rings is 72.99 (5°; the two rings are oriented so that the S atoms in each ring are on the same side. In the crystal, the three-dimensional network involves strong N—H...O hydrogen bonds, as well as C—H...π and π–π stacking interactions [centroid–centroid distances = 3.654 (1 and 3.495 (1 Å].

  7. Thiophene Conversion and Ethanol Oxidation on SiO2-Supported 12-PMoV-Mixed Heteropoly Compounds

    Czech Academy of Sciences Publication Activity Database

    Spojakina, A. A.; Kostova, N. G.; Sow, Bineta; Stamenova, M. W.; Jirátová, Květa

    2001-01-01

    Roč. 65, 2-4 (2001), s. 315-321 ISSN 0920-5861 Institutional research plan: CEZ:AV0Z4072921 Keywords : thiophene conversion * ethanol oxidation * mixed heteropoly compounds Subject RIV: CI - Industrial Chemistry, Chemical Engineering Impact factor: 2.333, year: 2001

  8. C2 Arylated Benzo[b]thiophene Derivatives as Staphylococcus aureus NorA Efflux Pump Inhibitors.

    Science.gov (United States)

    Liger, François; Bouhours, Pascale; Ganem-Elbaz, Carine; Jolivalt, Claude; Pellet-Rostaing, Stéphane; Popowycz, Florence; Paris, Jean-Marc; Lemaire, Marc

    2016-02-04

    An innovative and straightforward synthesis of second-generation 2-arylbenzo[b]thiophenes as structural analogues of INF55 and the first generation of our laboratory-made molecules was developed. The synthesis of C2-arylated benzo[b]thiophene derivatives was achieved through a method involving direct arylation, followed by simple structural modifications. Among the 34 compounds tested, two of them were potent NorA pump inhibitors, which led to a 16-fold decrease in the ciprofloxacin minimum inhibitory concentration (MIC) against the SA-1199B strain at concentrations of 0.25 and 0.5 μg mL(-1) (1 and 1.5 μm, respectively). This is a promising result relative to that obtained for reserpine (MIC=20 μg mL(-1)), a reference compound amongst NorA pump inhibitors. These molecules thus represent promising candidates to be used in combination with ciprofloxacin against fluoroquinolone-resistant strains. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Benchmarking semiempirical and DFT methods for the interaction of thiophene and diethyl sulfide molecules with a Ti(OH)4(H2O) cluster.

    Science.gov (United States)

    Vorontsov, Alexander V; Smirniotis, Panagiotis G

    2017-08-01

    Semiempirical methods pm6 and pm7 as well as density functional theory functionals exchange LSDA, exchange-correlation PW91 and PBE, hybrid B3LYP1 and PBE0 were compared for energy and geometry of thiophene, diethyl sulfide (DES) molecules and their binding to a frozen Ti(OH) 4 (H 2 O) complex having one coordinatively unsaturated Ti 5C site representing small fragment of TiO 2 anatase (001) surface. PBE0/6-31G(d) with DFT-D3 dispersion correction was the best method for description of thiophene and DES molecules geometries as comparison with experimental data demonstrated. Semiempirical methods pm6 and pm7 resulted in only three of four possible binding configurations of thiophene with the Ti(OH) 4 (H 2 O) complex while pm7 described correctly the enthalpy and all configurations of DES binding with the Ti(OH) 4 (H 2 O) complex. SBKJC pseudopotential and LSDA with and without dispersion correction produced flawed results for many configurations. PBE0 and PBE with and without dispersion correction and PW91 with 6-31G(d) basis set systematically produced dependable results for thiophene and DES binding to the Ti(OH) 4 (H 2 O) complex. PBE0-D3/6-31G(d), B3LYP1-D3/6-31G(d), and PBE-D3/6-31G(d) gave best match of binding energy for thiophene while PBE0/6-31G(d) gave best match of DES binding energy as comparison with CCSD(T) energy demonstrated. On the basis of the superior results obtained with PBE0/6-31G(d), it is the recommended method for modeling of adsorption over TiO 2 surfaces. Such a conclusion is in agreement with recent literature.

  10. Poly thiophene hydrophobic and hydrophilic compounds, silver and iodine synthesized by plasma; Compuestos hidrofobicos e hidrofilicos de politiofeno, plata y yodo sintetizados por plasma

    Energy Technology Data Exchange (ETDEWEB)

    Palacios, J.C.; Chavez, J.A. [IIM, UNAM, Circuito exterior, Ciudad Universitaria, 04510 Coyoacan, D.F. (Mexico); Olayo, M.G.; Cruz, G.J. [ININ, Apdo. Postal 18-1027, 11801 Mexico D.F. (Mexico)

    2007-07-01

    Compounds in thin films of poly thiophene with silver and poly thiophene doped with iodine and silver using splendor discharges were synthesized. It is studied the wettability of the compounds and its transport properties. It was found that the compounds can modify their hydrophilic to hydrophobic behavior controlling their surface ruggedness and the metallic content. The doped with iodine plays a fundamental paper in the modification of the ruggedness of the compounds. (Author)

  11. PBE–DFT theoretical study of organic photovoltaic materials based on thiophene with 1D and 2D periodic boundary conditions

    International Nuclear Information System (INIS)

    Saïl, K.; Bassou, G.; Gafour, M. H.; Miloua, F.

    2015-01-01

    Conjugated organic systems such as thiophene are interesting topics in the field of organic solar cells. We theoretically investigate π-conjugated polymers constituted by n units (n = 1–11) based on the thiophene (Tn) molecule. The computations of the geometries and electronic structures of these compounds are performed using the density functional theory (DFT) at the 6–31 G(d, p) level of theory and the Perdew–Burke–Eenzerhof (PBE) formulation of the generalized gradient approximation with periodic boundary conditions (PBCs) in one (1D) and two (2D) dimensions. Moreover, the electronic properties (HOCO, LUCO, E gap , V oc , and V bi ) are determined from 1D and 2D PBC to understand the effect of the number of rings in polythiophene. The absorption properties—excitation energies (E ex ), the maximal absorption wavelength (λ max ), oscillator strengths, and light harvesting—efficiency are studied using the time-dependent DFT method. Our studies show that changing the number of thiophene units can effectively modulate the electronic and optical properties. On the other hand, our work demonstrates the efficiency of theoretical calculation in the PBCs

  12. PBE–DFT theoretical study of organic photovoltaic materials based on thiophene with 1D and 2D periodic boundary conditions

    Energy Technology Data Exchange (ETDEWEB)

    Saïl, K., E-mail: sailkari7@yahoo.com; Bassou, G. [Université Djillali Liabès, Laboratoire de Microscopie, Microanalyse de la Matière et Spectroscopie Moléculaire (L2MSM), Faculté des Sciences Exactes (Algeria); Gafour, M. H. [Centre Universitaire Ahmed Zabana de Rélizane, Institut des Sciences Exactes et Sciences de la Nature et de la Vie, Département de Chimie (Algeria); Miloua, F. [Université Djillali Liabès, Laboratoire de Microscopie, Microanalyse de la Matière et Spectroscopie Moléculaire (L2MSM), Faculté des Sciences Exactes (Algeria)

    2015-12-15

    Conjugated organic systems such as thiophene are interesting topics in the field of organic solar cells. We theoretically investigate π-conjugated polymers constituted by n units (n = 1–11) based on the thiophene (Tn) molecule. The computations of the geometries and electronic structures of these compounds are performed using the density functional theory (DFT) at the 6–31 G(d, p) level of theory and the Perdew–Burke–Eenzerhof (PBE) formulation of the generalized gradient approximation with periodic boundary conditions (PBCs) in one (1D) and two (2D) dimensions. Moreover, the electronic properties (HOCO, LUCO, E{sub gap}, V{sub oc}, and V{sub bi}) are determined from 1D and 2D PBC to understand the effect of the number of rings in polythiophene. The absorption properties—excitation energies (E{sub ex}), the maximal absorption wavelength (λ{sub max}), oscillator strengths, and light harvesting—efficiency are studied using the time-dependent DFT method. Our studies show that changing the number of thiophene units can effectively modulate the electronic and optical properties. On the other hand, our work demonstrates the efficiency of theoretical calculation in the PBCs.

  13. An (e, 2e + ion) study of low-energy electron-impact ionization and fragmentation of tetrahydrofuran with high mass and energy resolutions

    Science.gov (United States)

    Ren, Xueguang; Pflüger, Thomas; Weyland, Marvin; Baek, Woon Yoon; Rabus, Hans; Ullrich, Joachim; Dorn, Alexander

    2014-10-01

    We study the low-energy (E0 = 26 eV) electron-impact induced ionization and fragmentation of tetrahydrofuran using a reaction microscope. All three final-state charged particles, i.e., two outgoing electrons and one fragment ion, are detected in triple coincidence such that the momentum vectors and, consequently, the kinetic energies for charged reaction products are determined. The ionic fragments are clearly identified in the experiment with a mass resolution of 1 amu. The fragmentation pathways of tetrahydrofuran are investigated by measuring the ion kinetic energy spectra and the binding energy spectra where an energy resolution of 1.5 eV has been achieved using the recently developed photoemission electron source. Here, we will discuss the fragmentation reactions for the cations C4H8O+, C4H7O+, C2H3O+, C3H_6^+, C3H_5^+, C3H_3^+, CH3O+, CHO+, and C2H_3^+.

  14. Solid-State Examination of Conformationally Diverse Sulfonamide Receptors Based on Bis(2-anilinoethynyl)pyridine, -Bipyridine, and -Thiophene.

    Science.gov (United States)

    Berryman, Orion B; Johnson, Charles A; Vonnegut, Chris L; Fajardo, Kevin A; Zakharov, Lev N; Johnson, Darren W; Haley, Michael M

    2015-03-04

    Utilizing an induced-fit model and taking advantage of rotatable acetylenic C(sp)-C(sp 2 ) bonds, we disclose the synthesis and solid-state structures of a series of conformationally diverse bis-sulfonamide arylethynyl receptors using either pyridine, 2,2'-bipyridine, or thiophene as the core aryl group. Whereas the bipyridine and thiophene structures do not appear to bind guests in the solid state, the pyridine receptors form 2 + 2 dimers with water molecules, two halides, or one of each, depending on the protonation state of the pyridine nitrogen atom. Isolation of a related bis-sulfonimide derivative demonstrates the importance of the sulfonamide N-H hydrogen bonds in dimer formation. The pyridine receptors form monomeric structures with larger guests such as BF 4 - or HSO 4 - , where the sulfonamide arms rotate to the side opposite the pyridine N atom.

  15. In situ oligomerization of 2-(thiophen-3-yl)acetate intercalated into Zn{sub 2}Al layered double hydroxide

    Energy Technology Data Exchange (ETDEWEB)

    Tronto, Jairo, E-mail: jairotronto@ufv.br [Universidade Federal de Viçosa, Instituto de Ciências Exatas e Tecnológicas, Campus de Rio Parsanaíba, Rodovia BR 354 km 310, Cx. Postal 22, CEP, 38.810-000 Rio Paranaíba, MG (Brazil); Pinto, Frederico G.; Costa, Liovando M. da [Universidade Federal de Viçosa, Instituto de Ciências Exatas e Tecnológicas, Campus de Rio Parsanaíba, Rodovia BR 354 km 310, Cx. Postal 22, CEP, 38.810-000 Rio Paranaíba, MG (Brazil); Leroux, Fabrice; Dubois, Marc [Clermont Université, Université Blaise Pascal, Institut de Chimie de Clermont-Ferrand, BP 10448, F-63000 Clermont-Ferrand (France); CNRS, UMR 6296, ICCF, BP 80026, F-6317 Clermont-Ferrand (France); Valim, João B. [Universidade de São Paulo, Faculdade de Filosofia Ciências e Letras de Ribeirão Preto, Departamento de Química, Av. dos Bandeirantes 3900, CEP 14.040-901, Ribeirão Preto, SP (Brazil)

    2015-01-15

    A layered double hydroxide (LDH) with cation composition Zn{sub 2}Al was intercalated with 2-(thiophen-3-yl)acetate (3-TA) monomers. To achieve in situ polymerization and/or oligomerization of the intercalated monomers, soft thermal treatments were carried out, and subsequent hybrid LDH materials were analyzed by means of several characterization techniques using powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), {sup 13}C CP–MAS nuclear magnetic resonance (NMR), electron spin resonance (EPR), scanning electron microscopy (SEM), and transmission electron microscopy (TEM), inductively coupled plasma optical emission spectroscopy (ICP–OES), and elemental analysis. PXRD analysis suggested that the intercalated monomers formed a bilayer. Thermal treatment of the hybrid LDH assembly above 120 °C provokes partially the breakdown of the layered structure, generating the phase zincite. EPR results indicated that vicinal monomers (oligomerization) were bound to each other after hydrothermal or thermal treatment, leading to a polaron response characteristic of electron conductivity localized on a restricted number of thiophene-based monomer segments. Localized unpaired electrons exist in the material and interact with the {sup 27}Al nuclei of the LDH layers by superhyperfine coupling. These unpaired electrons also interact with the surface of ZnO (O{sup 2−} vacancies), formed during the thermal treatments. - Graphical abstract: We synthesized a layered double hydroxide (LDH) with cation composition Zn{sub 2}Al, intercalated with 2-(thiophen-3-yl)acetate (3-TA) monomers, by coprecipitation at constant pH. We thermally treated the material, to achieve in situ polymerization and/or oligomerization of the intercalated monomers. - Highlights: • A Zn{sub 2}Al–LDH was intercalated with 2-(thiophen-3-yl)acetate monomers. • To achieve in situ oligomerization of the monomers, thermal treatments were made.

  16. Incorporating TCNQ into thiophene-fused heptacene for n-channel field effect transistor

    KAUST Repository

    Ye, Qun

    2012-06-01

    Incorporation of electron-deficient tetracyanoquinodimethane (TCNQ) into electron-rich thiophene-fused heptacene was successfully achieved for the purpose of stabilizing longer acenes and generating new n-type organic semiconductors. The heptacene-TCNQ derivative 1 was found to have good stability and an expected electron transporting property. Electron mobility up to 0.01 cm 2 V -1 s -1 has been obtained for this novel material in solution processed organic field effect transistors. © 2012 American Chemical Society.

  17. Synthesis of Poly(3,4-Ethylenedioxy thiophene)-Poly(Styrene-4-Sulfonate) Composites for Support Fuel Cell Catalyst Layer

    International Nuclear Information System (INIS)

    Eko Sulistiyono; Murni Handayani

    2009-01-01

    Synthesis of poly(3,4-ethylenedioxy thiophene)-poly(styrene-4-sulfonate) composites for support fuel cell catalyst layer are synthesis composites which become fuel cell catalyst support so that catalyst has optimal performance. Main function of composites is support platinum particle for application in fuel cell. This article explains the result of composites production process from ( 3,4 Ethylenedioxy thiophene) and Sodium poly( styrene - 4-sulfonate) using two methods Jingning Shan method (method 1) and Zhigang Qi and Peter G.Pickup method (method 2). Analysis of the synthesis results used Scanning Electron Microscopic –Electron Dispersive X – Ray Spectrophotometer (SEM-EDS ). The analysis result show that both methods produce polymer agglomerate into a sponge-like morphology. Composite from method 1 has morphology, pores and proton transport better than composite produced by method 2. (author)

  18. Substituted 2,1,3-Benzothiadiazole- And Thiophene-Based Polymers for Solar Cells - Introducing a New Thermocleavable Precursor

    DEFF Research Database (Denmark)

    Petersen, Martin Helgesen; Gevorgyan, Suren; Krebs, Frederik C

    2009-01-01

    Alkoxysubstituted and unsubstituted 2,1,3-benzothiadiazoles were prepared and copolymerized with substituted and unsubstituted thiophenes using both Stille and Yamamoto cross-coupling reactions. One class of the materials bore thermally labile ester groups. The materials were all found to have...

  19. 1,4-Bis(thiophen-2-ylbutane-1,4-dione

    Directory of Open Access Journals (Sweden)

    Zhi-Min Miao

    2012-03-01

    Full Text Available In the centrosymmetric title compound, C12H10O2S2, the alkyl chains adopt a fully extended all-trans conformation with respect to the C(thiophene—C bond. The non-H atoms of the molecule are nearly planar, with a maximum deviation of 0.063 (2 Å from the mean plane of the constituent atoms. In the crystal, symmetry-related molecules are linked via pairs of C—H...π contacts [H–centroid distances of the thiophene units = 2.79 (9 and 2.82 (4 Å], in turn interdigitating with each other along the bc plane, thus leading to an interwoven two-dimensional network.

  20. Toxicity of Thiophenes from Echinops transiliensis (Asteraceae) against Aedes aegypti (Diptera: Culicidae) Larvae

    Science.gov (United States)

    2014-01-01

    Toxicity of Thiophenes from Echinops transiliensis (Asteraceae) against Aedes aegypti (Diptera: Culicidae) Larvae by Hiroshi Nakano*a)b)c), Abbas...larvicides against Aedes aegypti. Structural differences among compounds 3, 5, and 8 consisted in differing AcO and OH groups attached to C(3’’) and C(4...serious human diseases including malaria, Japanese encephalitis, yellow fever, dengue, and filariasis. The urban-adapted Aedes aegypti mosquito has become

  1. Modelling of tetrahydrofuran promoted gas hydrate systems for carbon dioxide capture processes

    DEFF Research Database (Denmark)

    Herslund, Peter Jørgensen; Thomsen, Kaj; Abildskov, Jens

    2014-01-01

    A thermodynamic study of a novel gas hydrate based CO2 capture process is presented.•Model predicts this process unsuitable for CO2 capture from power station flue gases. A thermodynamic modelling study of both fluid phase behaviour and hydrate phase behaviour is presented for the quaternary system...... of water, tetrahydrofuran, carbon dioxide and nitrogen. The applied model incorporates the Cubic-Plus-Association (CPA) equation of state for the fluid phase description and the van der Waals-Platteeuw hydrate model for the solid (hydrate) phase. Six binary pairs are studied for their fluid phase behaviour...... accurate descriptions of both fluid- and hydrate phase equilibria in the studied system and its subsystems. The developed model is applied to simulate two simplified, gas hydrate-based processes for post-combustion carbon dioxide capture from power station flue gases. The first process, an unpromoted...

  2. Effect tetrahydrofuran as solvent in the synthesis of mullite by the Pechini

    International Nuclear Information System (INIS)

    Braga, A.N.S.; Santos, V.B.; Simoes, V.N.; Neves, G.A.; Lira, H.L.; Menezes, R.R.

    2016-01-01

    Mullite has been considered interesting in recent decades, due to its properties. The reaction mechanisms in the mullite formation may vary according to the precursor and the methods employed. In order to get mullite by a promising chemical synthesis and understudied in its production, this paper aims to synthesize mullite by Pechini method. We investigated the mullite crystallization kinetics from use of tetrahydrofuran as solvent. The samples were characterized by diffraction of X-ray (XRD), thermal analysis and scanning electron microscopy (SEM). The XRD results showed the formation of mullite, but together with the alpha alumina phase. Thermal analysis confirmed the disruption of the polymer chain prior to the formation of crystalline phases, with a total weight loss of 97%. The SEM showed a morphology consists of large aggregates, damaging the properties of refractory and performance of the material. (author)

  3. Oxidative desulfurization of thiophene on TiO2/ZSM-12 zeolite

    OpenAIRE

    Santos,Marília Ramalho Figueiredo dos; Pedrosa,Anne Michelle Garrido; Souza,Marcelo José Barros de

    2016-01-01

    In this work the hydrothermal synthesis of ZSM-12 zeolite was performed, varying the MTEACl/SiO2 ratio, where the synthesis temperature was 140 ºC and the crystallization time was 144 hours. The catalysts were characterized by XRD, FTIR and TG. TiO2/ZSM-12 catalysts were used with titanium ions concentrations of 5, 10 and 15%. The oxidative desulfurization (ODS) reactions were performed using a model mixture containing n-heptane as solvent and thiophene as sulfur compound, H2O2 as an oxidizin...

  4. 4,4′-Bipyridine–3-(thiophen-3-ylacrylic acid (1/2

    Directory of Open Access Journals (Sweden)

    Malaichamy Sathiyendiran

    2011-10-01

    Full Text Available In the title 1/2 adduct, C10H8N2·2C7H6O2S, the dihedral angle between the pyridine rings is 18.41 (11°. In the thiopheneacrylic acid molecules, the dihedral angles between the respective thiophene and acrylic acid units are 5.52 (17° and 23.92 (9°. In the crystal, the components are linked via O—H...N hydrogen-bonding interactions, forming units of two 3-thiopheneacrylic acid molecules and one 4,4′-bipyridine molecule.

  5. Adsorption of thiophene on a Si(0 0 1)-2 x 1 surface studied by photoelectron spectroscopy and diffraction

    Energy Technology Data Exchange (ETDEWEB)

    Shimomura, M. [Research Institute of Electronics, Shizuoka University, Johoku, Hamamatsu 432-8011 (Japan)]. E-mail: romshimo@rie.shizuoka.ac.jp; Ikejima, Y. [Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, Katahira, Aoba-ku, Sendai 980-8577 (Japan); Yajima, K. [Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, Katahira, Aoba-ku, Sendai 980-8577 (Japan); Yagi, T. [Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, Katahira, Aoba-ku, Sendai 980-8577 (Japan); Goto, T. [Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, Katahira, Aoba-ku, Sendai 980-8577 (Japan); Gunnella, R. [Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, Katahira, Aoba-ku, Sendai 980-8577 (Japan); UdR INFM, Department of Physics, University of Camerino, Camerino 62032 (Italy); Abukawa, T. [Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, Katahira, Aoba-ku, Sendai 980-8577 (Japan); Fukuda, Y. [Research Institute of Electronics, Shizuoka University, Johoku, Hamamatsu 432-8011 (Japan); Kono, S. [Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, Katahira, Aoba-ku, Sendai 980-8577 (Japan)

    2004-10-15

    Chemisorption of thiophene on a Si(0 0 1) surface has been studied by synchrotron radiation induced photoelectron spectroscopy (SRPES). Two adsorption-related components in Si 2p and S 2p spectra are observed after exposure of thiophene. It is suggested that the two components of Si 2p are ascribed to silicon bonded to hydrocarbon and sulfur. The core-level shift resolved photoelectron diffraction (PED) result indicates that the low-kinetic-energy component of S 2p can be ascribed to 2,5-dihydrothiophehe (DHT)-like species. Another S 2p component could be assigned to dissociated sulfur based on the results of PED and time evolution of the spectrum under irradiation. These assignments are consistent with the core-level shift of S 2p.

  6. Adsorption of thiophene on a Si(0 0 1)-2 x 1 surface studied by photoelectron spectroscopy and diffraction

    International Nuclear Information System (INIS)

    Shimomura, M.; Ikejima, Y.; Yajima, K.; Yagi, T.; Goto, T.; Gunnella, R.; Abukawa, T.; Fukuda, Y.; Kono, S.

    2004-01-01

    Chemisorption of thiophene on a Si(0 0 1) surface has been studied by synchrotron radiation induced photoelectron spectroscopy (SRPES). Two adsorption-related components in Si 2p and S 2p spectra are observed after exposure of thiophene. It is suggested that the two components of Si 2p are ascribed to silicon bonded to hydrocarbon and sulfur. The core-level shift resolved photoelectron diffraction (PED) result indicates that the low-kinetic-energy component of S 2p can be ascribed to 2,5-dihydrothiophehe (DHT)-like species. Another S 2p component could be assigned to dissociated sulfur based on the results of PED and time evolution of the spectrum under irradiation. These assignments are consistent with the core-level shift of S 2p

  7. Application of the cubic-plus-association (CPA) equation of state to model the fluid phase behaviour of binary mixtures of water and tetrahydrofuran

    DEFF Research Database (Denmark)

    Herslund, Peter Jørgensen; Thomsen, Kaj; Abildskov, Jens

    2013-01-01

    The complex fluid phase behaviour, of the binary system comprised of water and tetrahydrofuran (THF) is modelled by use of the cubic-plus-association (CPA) equation of state. A total of seven modelling approaches are analysed, differing only in their way of describing THF and its interactions...

  8. Gas-liquid chromatography measurements of activity coefficients at infinite dilution of various organic solutes and water in tri-iso-butylmethylphosphonium tosylate ionic liquid

    International Nuclear Information System (INIS)

    Domanska, Urszula; Paduszynski, Kamil

    2010-01-01

    Activity coefficients at infinite dilution (γ 13 ∞ ) of 33 different solutes (including alkanes, cycloalkanes, alkenes, alkynes, benzene, alkylbenzenes, water, alcohols, MTBE, thiophene and THF) in the ionic liquid tri-iso-butylmethylphosphonium tosylate have been determined by using the GLC method and have been reported over the temperature range (298.15 to 368.15) K. The partial molar excess enthalpies of mixing at infinite dilution have been determined based on temperature dependence of γ 13 ∞ . Selectivity and capacity at infinite dilution has been also calculated for exemplary separation processes in systems n-hexane/benzene and n-hexane/thiophene, to evaluate if the studied ionic liquid is capable to be a good entrainer for these processes, e.g. in the liquid-liquid extraction. The obtained results are promising however the ionic liquid studied shows a lower selectivity than some of imidazolium-based ionic liquids. To our best knowledge, the results indicate that tri-iso-butylmethylphosphonium tosylate is the best for the separation problem of aliphatic hydrocarbons from aromatic hydrocarbons among all of the studied quaternary phosphonium-based ionic liquids.

  9. Fragmentation of tetrahydrofuran molecules by H(+), C(+), and O(+) collisions at the incident energy range of 25-1000 eV.

    Science.gov (United States)

    Wasowicz, Tomasz J; Pranszke, Bogusław

    2015-01-29

    We have studied fragmentation processes of the gas-phase tetrahydrofuran (THF) molecules in collisions with the H(+), C(+), and O(+) cations. The collision energies have been varied between 25 and 1000 eV and thus covered a velocity range from 10 to 440 km/s. The following excited neutral fragments of THF have been observed: the atomic hydrogen H(n), n = 4-9, carbon atoms in the 2p3s (1)P1, 2p4p (1)D2, and 2p4p (3)P states and vibrationally and rotationally excited diatomic CH fragments in the A(2)Δ and B(2)Σ(-) states. Fragmentation yields of these excited fragments have been measured as functions of the projectile energy (velocity). Our results show that the fragmentation mechanism depends on the projectile cations and is dominated by electron transfer from tetrahydrofuran molecules to cations. It has been additionally hypothesized that in the C(+)+THF collisions a [C-C4H8O](+) complex is formed prior to dissociation. The possible reaction channels involved in fragmentation of THF under the H(+), C(+), and O(+) cations impact are also discussed.

  10. The effect of stirring on the heterogeneous nucleation of water and of clathrates of tetrahydrofuran/water mixtures

    Directory of Open Access Journals (Sweden)

    P.W. Wilson

    2016-03-01

    Full Text Available The statistics of liquid-to-crystal nucleation are measured for both water and for clathrate-forming mixtures of tetrahydrofuran (THF and water using an automatic lag time apparatus (ALTA. We measure the nucleation temperature using this apparatus in which a single sample is repeatedly cooled, nucleated and thawed. The effect of stirring on nucleation has been evaluated numerically and is discussed. We find that stirring of the solution makes no difference to the nucleation temperature of a given solution in a given tube.

  11. Successful bioaugmentation of an activated sludge reactor with Rhodococcus sp. YYL for efficient tetrahydrofuran degradation

    International Nuclear Information System (INIS)

    Yao, Yanlai; Lu, Zhenmei; Zhu, Fengxiang; Min, Hang; Bian, Caimiao

    2013-01-01

    Highlights: • Rhodococcus sp. YYL is an efficient tetrahydrofuran-degrading strain. • Strain YYL was used to augment an activated sludge system for THF degradation. • Successful bioaugmentation was achieved only by coinoculation of strain YYL and the two bacilli. • Successful bioaugmentation of the system resulted in efficient THF degradation. -- Abstract: The exchange of tetrahydrofuran (THF)-containing wastewater should significantly affect the performance of an activated sludge system. In this study, the feasibility of using THF-degrading Rhodococcus sp. strain YYL to bioaugment an activated sludge system treating THF wastewater was explored. As indicated by a DGGE analysis, strain YYL alone could not dominate the system, with the concentration of mixed liquor suspended solids (MLSS) decreasing to nearly half of the initial concentration after 45 d, and the microbial diversity was found to be significantly reduced. However, after the reactor was augmented with the mixed culture of strain YYL and two bacilli initially coexisting in the enriched isolation source, strain YYL quickly became dominant in the system and was incorporated into the activated sludge. The concentration of MLSS increased from 2.1 g/L to 7.3 g/L in 20 d, and the efficiency of THF removal from the system was remarkably improved. After the successful bioaugmentation, more than 95% of THF was completely removed from the wastewater when 20 mM THF was continuously loaded into the system. In conclusion, our research first demonstrates that bioaugmentation of activated sludge system for THF degradation is feasible but that successful bioaugmentation should utilize a THF-degrading mixed culture as the inoculum, in which the two bacilli might help strain YYL colonize in activated sludge by co-aggregation

  12. Combretastatin A-4 based thiophene derivatives as antitumor agent: Development of structure activity correlation model using 3D-QSAR, pharmacophore and docking studies

    Directory of Open Access Journals (Sweden)

    Vijay K. Patel

    2017-12-01

    Full Text Available The structure and ligand based synergistic approach is being applied to design ligands more correctly. The present report discloses the combination of structure and ligand based tactics i.e., molecular docking, energetic based pharmacophore, pharmacophore and atom based 3D-QSAR modeling for the analysis of thiophene derivatives as anticancer agent. The main purpose of using structure and ligand based synergistic approach is to ascertain a correlation between structure and its biological activity. Thiophene derivatives have been found to possess cytotoxic activity in several cancer cell lines and its mechanism of action basically involves the binding to the colchicine site on β-tubulin. The structure based approach (molecular docking was performed on a series of thiophene derivatives. All the structures were docked to colchicine binding site of β tubulin for examining the binding affinity of compounds for antitumor activity. The pharmacophore and atom based 3D-QSAR modeling was accomplished on a series of thiophene (32 compounds analogues. Five-point common pharmacophore hypotheses (AAAAR.38 were selected for alignment of all compounds. The atom based 3D-QSAR models were developed by selection of 23 compounds as training set and 9 compounds as test set, demonstrated good partial least squares statistical results. The generated common pharmacophore hypothesis and 3D-QSAR models were validated further externally by measuring the activity of database compounds and assessing it with actual activity. The common pharmacophore hypothesis AAAAR.38 resulted in a 3D-QSAR model with excellent PLSs data for factor two characterized by the best predication coefficient Q2 (cross validated r2 (0.7213, regression R2 (0.8311, SD (0.3672, F (49.2, P (1.89E-08, RMSE (0.3864, Stability (0.8702, Pearson-r (0.8722. The results of these molecular modeling studies i.e., molecular docking, energetic based pharmacophore, pharmacophore and atom based 3D-QSAR modeling

  13. Solid-State Examination of Conformationally Diverse Sulfonamide Receptors Based on Bis(2-anilinoethynyl)pyridine, -Bipyridine, and -Thiophene

    Science.gov (United States)

    Berryman, Orion B.; Johnson, Charles A.; Vonnegut, Chris L.; Fajardo, Kevin A.; Zakharov, Lev N.; Johnson, Darren W.; Haley, Michael M.

    2015-01-01

    Utilizing an induced-fit model and taking advantage of rotatable acetylenic C(sp)–C(sp2) bonds, we disclose the synthesis and solid-state structures of a series of conformationally diverse bis-sulfonamide arylethynyl receptors using either pyridine, 2,2′-bipyridine, or thiophene as the core aryl group. Whereas the bipyridine and thiophene structures do not appear to bind guests in the solid state, the pyridine receptors form 2 + 2 dimers with water molecules, two halides, or one of each, depending on the protonation state of the pyridine nitrogen atom. Isolation of a related bis-sulfonimide derivative demonstrates the importance of the sulfonamide N–H hydrogen bonds in dimer formation. The pyridine receptors form monomeric structures with larger guests such as BF4− or HSO4−, where the sulfonamide arms rotate to the side opposite the pyridine N atom. PMID:26405435

  14. The oxidation of alkylaryl sulfides and benzo[b]thiophenes by Escherichia coli cells expressing wild-type and engineered styrene monooxygenase from Pseudomonas putida CA-3.

    Science.gov (United States)

    Nikodinovic-Runic, Jasmina; Coulombel, Lydie; Francuski, Djordje; Sharma, Narain D; Boyd, Derek R; Ferrall, Rory Moore O; O'Connor, Kevin E

    2013-06-01

    Nine different sulfur-containing compounds were biotransformed to the corresponding sulfoxides by Escherichia coli Bl21(DE3) cells expressing styrene monooxygenase (SMO) from Pseudomonas putida CA-3. Thioanisole was consumed at 83.3 μmoles min(-1) g cell dry weight(-1) resulting mainly in the formation of R-thioanisole sulfoxide with an enantiomeric excess (ee) value of 45 %. The rate of 2-methyl-, 2-chloro- and 2-bromo-thioanisole consumption was 2-fold lower than that of thioanisole. Surprisingly, the 2-methylthioanisole sulfoxide product had the opposite (S) configuration to that of the other 2-substituted thioanisole derivatives and had a higher ee value (84 %). The rate of oxidation of 4-substituted thioanisoles was higher than the corresponding 2-substituted substrates but the ee values of the products were consistently lower (10-23 %). The rate of benzo[b]thiophene and 2-methylbenzo[b]thiophene sulfoxidation was approximately 10-fold lower than that of thioanisole. The ee value of the benzo[b]thiophene sulfoxide could not be determined as the product racemized rapidly. E. coli cells expressing an engineered SMO (SMOeng R3-11) oxidised 2-substituted thioanisoles between 1.8- and 2.8-fold faster compared to cells expressing the wild-type enzyme. SMOeng R3-11 oxidised benzo[b]thiophene and 2-methylbenzo[b]thiophene 10.1 and 5.6 times faster that the wild-type enzyme. The stereospecificity of the reaction catalysed by SMOeng was unchanged from that of the wild type. Using the X-ray crystal structure of the P. putida S12 SMO, it was evident that the entrance of substrates into the SMO active site is limited by the binding pocket bottleneck formed by the side chains of Val-211 and Asn-46 carboxyamide group.

  15. Short-chain grafting of tetrahydrofuran and 1,4-dioxane cycles on vinylchloride-maleic anhydride copolymer

    Directory of Open Access Journals (Sweden)

    2009-01-01

    Full Text Available Mass increase of vinylchloride-maleic anhydride (VC-MA copolymer samples aged in tetrahydrofuran (THF or in 1,4-dioxane results from chemical interaction of VC-MA macromolecules with 1,4-dioxane or THF. Microstructure of the products of such modification was proved by infrared spectroscopy (IR- and nuclear magnetic resonance spectroscopy (13C NMR and 1H NMR. Mechanism of modification has been proposed. The results of microstructure research of VC-MA samples aged in THF and in 1,4-dioxane coincide with already known data on the reactions of opening of these and other oxygen-containing cycles under mild conditions.

  16. Pervaporation and sorption behavior of zeolite-filled polyethylene glycol hybrid membranes for the removal of thiophene species.

    Science.gov (United States)

    Lin, Ligang; Zhang, Yuzhong; Li, Hong

    2010-10-01

    Polyethylene glycol (PEG)-CuY zeolite hybrid membranes were prepared for sulfur removal from gasoline feed. The sorption and diffusion behavior of typical gasoline components through the hybrid membranes has been investigated by systematic studies of dynamic sorption curves. Influencing factors including feed temperature, permeate pressure, and zeolite content in the membranes on membrane performance have been evaluated. Immersion experiments results showed the preferential sorption of thiophene, which is key in fulfilling the separation of thiophene/hydrocarbon mixtures. The sorption, diffusion, and permeation coefficients of gasoline components in filled membranes are higher than those in unfilled membranes. Pervaporation (PV) and gas chromatography (GC) experiments results corresponded to the discussions on dynamic sorption curves. PV experiments showed that lower permeate pressure meant higher separation performance. The optimum temperature occurred at 383K, and an Arrhenius relationship existed between permeation flux and operating temperature. The CuY zeolite filling led to a significant increase of flux since the porous zeolite provides for more diffusion for small molecules in mixed matrix membranes. The sulfur enrichment factor increased first and then decreased with the increasing zeolite content, which was attributed to the combined influence of complexation force between CuY and thiophenes as well as the trade-off phenomenon between flux and selectivity. At 9 wt% CuY content, a higher permeation flux (3.19 kg/(m(2) h)) and sulfur enrichment factor (2.95) were obtained with 1190 microg/g sulfur content level in gasoline feed. Copyright 2010 Elsevier Inc. All rights reserved.

  17. Acylated 2-(N-arylaminomethylene)benzo[b]thiophene-3(2H)-Ones: Molecular Switches with Varying Migrants and Substituents

    International Nuclear Information System (INIS)

    Dubonosov, A.D.; Rybalkin, V.P.; Tsukanov, A.V.; Minkin, V.I.; Popova, L.L.; Revinsky, Y.V.; Bren, V.A.; Minkin, V.I.

    2009-01-01

    Synthesis and properties of photo chromic acylated 2-(N-arylaminomethylene)benzo[b]thiophene-3(2H)-ones are described. Their structure largely depends on the nature of acyl migrant and in a less degree on N-aryl substituent.

  18. The role of electron-impact vibrational excitation in electron transport through gaseous tetrahydrofuran

    Energy Technology Data Exchange (ETDEWEB)

    Duque, H. V. [School of Chemical and Physical Sciences, Flinders University, GPO Box 2100, Adelaide, South Australia 5001 (Australia); Departamento de Física, Universidade Federal de Juiz de Fora, 36036-330 Juiz de Fora, Minas Gerais (Brazil); Do, T. P. T. [School of Education, Can Tho University, Campus II, 3/2 Street, Xuan Khanh, Ninh Kieu, Can Tho City (Viet Nam); Lopes, M. C. A. [Departamento de Física, Universidade Federal de Juiz de Fora, 36036-330 Juiz de Fora, Minas Gerais (Brazil); Konovalov, D. A.; White, R. D. [College of Science, Technology and Engineering, James Cook University, Townsville (Australia); Brunger, M. J., E-mail: michael.brunger@flinders.edu.au, E-mail: darryl.jones@flinders.edu.au [School of Chemical and Physical Sciences, Flinders University, GPO Box 2100, Adelaide, South Australia 5001 (Australia); Institute of Mathematical Sciences, University of Malaya, 50603 Kuala Lumpur (Malaysia); Jones, D. B., E-mail: michael.brunger@flinders.edu.au, E-mail: darryl.jones@flinders.edu.au [School of Chemical and Physical Sciences, Flinders University, GPO Box 2100, Adelaide, South Australia 5001 (Australia)

    2015-03-28

    In this paper, we report newly derived integral cross sections (ICSs) for electron impact vibrational excitation of tetrahydrofuran (THF) at intermediate impact energies. These cross sections extend the currently available data from 20 to 50 eV. Further, they indicate that the previously recommended THF ICS set [Garland et al., Phys. Rev. A 88, 062712 (2013)] underestimated the strength of the electron-impact vibrational excitation processes. Thus, that recommended vibrational cross section set is revised to address those deficiencies. Electron swarm transport properties were calculated with the amended vibrational cross section set, to quantify the role of electron-driven vibrational excitation in describing the macroscopic swarm phenomena. Here, significant differences of up to 17% in the transport coefficients were observed between the calculations performed using the original and revised cross section sets for vibrational excitation.

  19. Reactions of UCl/sub 3/(THF)/sub x/ (THF=tetrahydrofuran) with poly(pyrazolyl) borates and sodium cyclopentadienide

    Energy Technology Data Exchange (ETDEWEB)

    Santos, I; Marques, N; Pires de Matos, A

    1986-08-01

    Reactions of the title compound with different stoichiometries of KH/sub n/BL/sub 4-n/ (where n=1,2 and L=3,5-dimethylpyrazolyl) have been studied and the compounds UCl/sub 2/H/sub 2/BL/sub 2/ and UCl/sub 2/HBL/sub 3/ identified. The preparation of UCl/sub 2/H/sub 2/BL'/sub 2/py (L'=pyrazolyl, py=pyridine) is reported. The reactivity of UCl/sub 2/H/sub 2/BL'/sub 2/THF with sodium cyclopentadienide in tetrahydrofuran and toluene has been studied.

  20. Variations of structures and solid-state conductivity of isomeric silver(I) coordination polymers having linear and V-shaped thiophene-centered ditriazole ligands

    International Nuclear Information System (INIS)

    Hu, Bin; Geng, Jiao; Zhang, Lie; Huang, Wei

    2014-01-01

    A pair of new linear and V-shaped acceptor–donor–acceptor (A−D−A) thiophene-centered ditriazole structural isomers, i.e., 2,5-di(1H-1,2,4-triazol-1-yl)thiophene (L 1 ) and 3,4-di(1H-1,2,4-triazol-1-yl)thiophene (L 2 ), has been synthesized and characterized. They are used as μ 2 -bridging ligands to prepare a pair of silver(I) coordination polymers formulated as [Ag(L 1 )(NO 3 )] n (1) and [Ag(L 2 )(NO 3 )] n (2), which are also structural isomers at the supramolecular level. X-ray single-crystal diffraction analyses for 1 and 2 reveal that they exhibit the same one-dimensional (1D) coordination polymers but different structural architectures because of the distinguishable shape and configuration of isomeric ligands (L 1 and L 2 ) and the alterations of the coordination numbers. More interestingly, compared with the free ligands, 1D silver(I) polymeric isomers 1 and 2 show significant enhancement of solid-state conductivity to different extents (1.42×10 4 and 2.17×10 3 times), where 6.96 times' enhancement of solid-state conductivity from 1 to 2 has been observed. The formation of Ag–N coordinative bonds and the configurational discrepancy of L 1 and L 2 are believed to play important roles in facilitating the electron transport between molecules, which can also be supported by Density Function Theory calculations of their band gaps. - Graphical abstract: A pair of linear and V-shaped isomeric thiophene-centered ditriazole ligands (L 1 ) and L 2 are used to prepare a pair of silver(I) polymeric isomers (1 and 2), where significant enhancement of solid-state conductivity to different extents are observed originating from the distinguishable shape and configuration of isomeric ligands. - Highlights: • A pair of linear and V-shaped thiophene-centered ditriazole structural isomers is prepared. • They are used as µ 2 -bridging ligands to prepare a pair of silver(I) polymeric isomers. • Significant enhancement of solid-state conductivity is observed

  1. Consecutive thiophene-annulation approach to π-extended thienoacene-based organic semiconductors with [1]benzothieno[3,2-b][1]benzothiophene (BTBT) substructure.

    Science.gov (United States)

    Mori, Takamichi; Nishimura, Takeshi; Yamamoto, Tatsuya; Doi, Iori; Miyazaki, Eigo; Osaka, Itaru; Takimiya, Kazuo

    2013-09-18

    We describe a new synthetic route to the [1]benzothieno[3,2-b][1]benzothiophene (BTBT) substructure featuring two consecutive thiophene-annulation reactions from o-ethynyl-thioanisole substrates and arylsulfenyl chloride reagents that can be easily derived from arylthiols. The method is particularly suitable for the synthesis of unsymmetrical derivatives, e.g., [1]benzothieno[3,2-b]naphtho[2,3-b]thiophene, [1]benzothieno[3,2-b]anthra[2,3-b]thiophene, and naphtho[3,2-b]thieno[3,2-b]anthra[2,3-b]thiophene, a selenium-containing derivative, [1]benzothieno[3,2-b][1]benzoselenophene. It also allows us to access largely π-extended derivatives with two BTBT substructures, e.g., bis[1]benzothieno[2,3-d:2',3'-d']benzo[1,2-b:4,5-b']dithiophene and bis[1]benzothieno[2,3-d:2',3'-d']naphtho[2,3-b:6,7-b']dithiophene (BBTNDT). It should be emphasized that these new BTBT derivatives are otherwise difficult to be synthesized. In addition, since various substrates and reagents, o-ethynyl-thioanisoles and arylthiols, respectively, can be combined, the method can be regarded as a versatile tool for the development of thienoacene-based organic semiconductors in this class. Among the newly synthesized materials, highly π-extended BBTNDT afforded very high mobility (>5 cm(2) V(-1) s(-1)) in its vapor-deposited organic field-effect transistors (OFETs), which is among the highest for unsubstituted acene- or thienoacenes-based organic semiconductors. In fact, the structural analyses of BBTNDT both in the single crystal and thin-film state indicated that an interactive two-dimensional molecular array is realized in the solid state, which rationalize the higher carrier mobility in the BBTNDT-based OFETs.

  2. Adsorption behaviors of thiophene, benzene, and cyclohexene on FAU zeolites: Comparison of CeY obtained by liquid-, and solid-state ion exchange

    Energy Technology Data Exchange (ETDEWEB)

    Qin, Yucai [College of Chemistry and Chemical Engineering, China University of Petroleum (East China), Qingdao 266555, Shandong (China); Key Laboratory of Petrochemical Catalytic Science and Technology, Liaoning Province, Liaoning Shihua University, Fushun 113001, Liaoning (China); Mo, Zhousheng; Yu, Wenguang; Dong, Shiwei; Duan, Linhai [College of Chemistry and Chemical Engineering, China University of Petroleum (East China), Qingdao 266555, Shandong (China); Gao, Xionghou, E-mail: gaoxionghou@petrochina.com.cn [Petrochemical Research Institute, PetroChina Company Limited, 9 Dongzhimen North Street, Dongcheng District, Beijing 100007 (China); Song, Lijuan, E-mail: lsong56@263.net [College of Chemistry and Chemical Engineering, China University of Petroleum (East China), Qingdao 266555, Shandong (China); Key Laboratory of Petrochemical Catalytic Science and Technology, Liaoning Province, Liaoning Shihua University, Fushun 113001, Liaoning (China)

    2014-02-15

    Cerium containing Y zeolites were prepared by liquid- (L-CeY) and solid- (S-CeY) state ion exchange from NaY and HY, respectively. The structural and textural properties were characterized by XRD and N{sub 2} adsorption, and acidity properties were characterized by NH{sub 3} temperature-programmed desorption (NH{sub 3}-TPD) and in situ FTIR spectrum of chemisorbed pyridine (in situ Py-FTIR). Furthermore, the single component adsorption and multi-component competitive adsorption behavior of thiophene, benzene and cyclohexene on those zeolites have also been studied by using vapor adsorption isotherms, solution adsorption breakthrough curves, thermogravimetry and derivative thermogravimetry (TG/DTG), frequency response (FR) and in situ FTIR techniques. The results indicate that the primary adsorption mode of benzene is simply micropore filling process, but the nature of effect of aromatics on selective adsorption of thiophene is competitive adsorption. The strong chemical adsorptions and protonization reactions of thiophene and cyclohexene occur upon the Brönsted acid sites of the HY and L-CeY zeolites, and the preferable acid catalytic protonization reactions of olefins hinder the further adsorption of sulfur compounds.

  3. Preparation of mesoporous alumina films by anodization: Effect of pretreatments on the aluminum surface and MTBE catalytic oxidation

    International Nuclear Information System (INIS)

    Vazquez, A.L.; Carrera, R.; Arce, E.; Castillo, N.; Castillo, S.; Moran-Pineda, M.

    2009-01-01

    Mesoporous materials are both scientifically and technologically important because of the presence of voids of controllable dimensions at atomic, molecular, and nanometric scales. Over the last decade, there has been both an increasing interest and research effort in the synthesis and characterization of these types of materials. The purposes of this work are to study the physical and chemical changes in the properties of mesoporous alumina films produced by anodization in sulphuric acid by different pretreatments on the aluminium surface such as mechanical polishing [MP] and electropolishing [EP]; and to compare their properties such as morphology, structure and catalytic activity with those present in commercial alumina. The morphologic and physical characterizations of the alumina film samples were carried out by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The chemical evaluations were performed by the oxidation of methyl-tert-butyl-ether (MTBE) at 400 deg. C under O 2 /He oxidizing conditions (Praxair, 2.0% O 2 /He balance). According to the results, the samples that presented higher activities than those in Al 2 O 3 /Al [MP] and commercial alumina in the MTBE oxidation (69%), were those prepared by Al 2 O 3 /Al [EP]. The average mesoporous diameter was 17 nm, and the morphological shape was equiaxial; thus, that pore distribution was the smallest of all with a homogeneous distribution.

  4. Preparation of mesoporous alumina films by anodization: Effect of pretreatments on the aluminum surface and MTBE catalytic oxidation

    Energy Technology Data Exchange (ETDEWEB)

    Vazquez, A.L., E-mail: avazquezd@ipn.m [Departamento de Ingenieria Metalurgica, ESIQIE-IPN, AP 75-876, Mexico, D.F. (Mexico); Programa de Ingenieria Molecular, Instituto Mexicano del Petroleo, Eje Lazaro Cardenas 152, C.P. 07730, Mexico, D.F. (Mexico); Carrera, R. [Departamento de Ingenieria Metalurgica, ESIQIE-IPN, AP 75-876, Mexico, D.F. (Mexico); Programa de Ingenieria Molecular, Instituto Mexicano del Petroleo, Eje Lazaro Cardenas 152, C.P. 07730, Mexico, D.F. (Mexico); Arce, E. [Departamento de Ingenieria Metalurgica, ESIQIE-IPN, AP 75-876, Mexico, D.F. (Mexico); Castillo, N. [CINVESTAV, Departamento de Fisica. Av. IPN 2508, 07360, Mexico, D.F (Mexico); Castillo, S. [Departamento de Ingenieria Metalurgica, ESIQIE-IPN, AP 75-876, Mexico, D.F. (Mexico); Programa de Ingenieria Molecular, Instituto Mexicano del Petroleo, Eje Lazaro Cardenas 152, C.P. 07730, Mexico, D.F. (Mexico); Moran-Pineda, M. [Programa de Ingenieria Molecular, Instituto Mexicano del Petroleo, Eje Lazaro Cardenas 152, C.P. 07730, Mexico, D.F. (Mexico)

    2009-08-26

    Mesoporous materials are both scientifically and technologically important because of the presence of voids of controllable dimensions at atomic, molecular, and nanometric scales. Over the last decade, there has been both an increasing interest and research effort in the synthesis and characterization of these types of materials. The purposes of this work are to study the physical and chemical changes in the properties of mesoporous alumina films produced by anodization in sulphuric acid by different pretreatments on the aluminium surface such as mechanical polishing [MP] and electropolishing [EP]; and to compare their properties such as morphology, structure and catalytic activity with those present in commercial alumina. The morphologic and physical characterizations of the alumina film samples were carried out by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The chemical evaluations were performed by the oxidation of methyl-tert-butyl-ether (MTBE) at 400 deg. C under O{sub 2}/He oxidizing conditions (Praxair, 2.0% O{sub 2}/He balance). According to the results, the samples that presented higher activities than those in Al{sub 2}O{sub 3}/Al [MP] and commercial alumina in the MTBE oxidation (69%), were those prepared by Al{sub 2}O{sub 3}/Al [EP]. The average mesoporous diameter was 17 nm, and the morphological shape was equiaxial; thus, that pore distribution was the smallest of all with a homogeneous distribution.

  5. Discovery of novel N-(5-(arylcarbonyl)thiazol-2-yl)amides and N-(5-(arylcarbonyl)thiophen-2-yl)amides as potent RORγt inhibitors.

    Science.gov (United States)

    Wang, Yonghui; Cai, Wei; Zhang, Guifeng; Yang, Ting; Liu, Qian; Cheng, Yaobang; Zhou, Ling; Ma, Yingli; Cheng, Ziqiang; Lu, Sijie; Zhao, Yong-Gang; Zhang, Wei; Xiang, Zhijun; Wang, Shuai; Yang, Liuqing; Wu, Qianqian; Orband-Miller, Lisa A; Xu, Yan; Zhang, Jing; Gao, Ruina; Huxdorf, Melanie; Xiang, Jia-Ning; Zhong, Zhong; Elliott, John D; Leung, Stewart; Lin, Xichen

    2014-01-15

    Novel series of N-(5-(arylcarbonyl)thiazol-2-yl)amides and N-(5-(arylcarbonyl)thiophen-2-yl)amides were discovered as potent retinoic acid receptor-related orphan receptor-gamma-t (RORγt) inhibitors. SAR studies of the RORγt HTS hit 6a led to identification of thiazole ketone amide 8h and thiophene ketone amide 9g with high binding affinity and inhibitory activity of Th17 cell differentiation. Compound 8h showed in vivo efficacy in both mouse experimental autoimmune encephalomyelitis (EAE) and collagen induced arthritis (CIA) models via oral administration. Copyright © 2013 Elsevier Ltd. All rights reserved.

  6. Direct catalytic conversion of brown seaweed-derived alginic acid to furfural using 12-tungstophosphoric acid catalyst in tetrahydrofuran/water co-solvent

    International Nuclear Information System (INIS)

    Park, Geonu; Jeon, Wonjin; Ban, Chunghyeon; Woo, Hee Chul; Kim, Do Heui

    2016-01-01

    Highlights: • Furfural was produced by catalytic conversion of macroalgae-derived alginic acid. • 12-Tungstophosphoric acid (H_3PW_1_2O_4_0) showed remarkable catalytic performance. • Tetrahydrofuran (THF) as a reaction medium significantly enhanced production of furfural. - Abstract: Furfural, a biomass-derived platform chemical, was produced by acid-catalyzed reaction of alginic acid extracted from brown seaweed. Three acid catalysts, H_2SO_4, Amberlyst15 and 12-tungstophosphoric acid (H_3PW_1_2O_4_0), were compared to evaluate their catalytic performance for the alginic acid conversion. The H_3PW_1_2O_4_0 catalyst showed the highest catalytic activity, yielding the maximum furfural yield (33.8%) at 180 °C for 30 min in tetrahydrofuran/water co-solvent. Higher reaction temperature promoted the conversion of alginic acid to furfural, but the transformation of furfural to humin was also accelerated. To our knowledge, this is the highest furfural yield among studies about the direct catalytic conversion of alginic acid. Furthermore, products distribution with time-on-stream was investigated in detail, which led us to propose a reaction pathway.

  7. Synthesis, characterization and nano-structuration of poly-thiophene derivatives for organic photovoltaic solar cells; Synthese, caracterisation et nanostructuration de derives du polythiophene pour des applications en cellules photovoltaiques organiques

    Energy Technology Data Exchange (ETDEWEB)

    Berson, S

    2007-10-15

    This work is devoted to the synthesis of poly-thiophene derivatives with low bandgap and preserving high oxidation potential. Disubstituted thiophenes and 'Donor-Acceptor' bi-thiophenes were synthesized and then polymerized. The side chains of these polymers, donor or acceptor, were modified in order to tune the properties of material as well from the optical point of view as electrochemical. These polymers were also tested in blend with PCBM in bulk-heterojunction photovoltaic cells. Voc delivered by the devices showed a linear dependence according to the potential of oxidation of the polymers. Copolymers containing cyano-thiophene and alkyl- or alkoxy-thiophene showed values of 0.8 V. However, in spite of power conversion efficiency of 1 %, these performances remain lower than the one obtained with the P3HT. Optimizations in terms of morphology are certainly necessary. Indeed, the morphology of the active layer plays a key role in obtaining high power conversion efficiency. An original technique of nano-structuration of the polymer on a nano-metric scale was developed during this work, leading to the development of fibrillar P3HT. These nano-structures, presenting an important degree of order, are formed spontaneously in solution. Their rate compared to amorphous material is perfectly controllable and adjustable in solution and in solid state. Measurements of mobilities show a strong improvement of the transport of load within these fibrillar layers compared to a traditional film of P3HT obtained without annealing. Power conversion efficiencies of 3.6% on glass and 3.3 % on plastic were reached without annealing. (author)

  8. Synthesis, physical and chemical properties of 2-((4-(R-amino-5-(thiophen-2-ylmethyl-4H-1,2,4-triazol-3-ylthioacetic acids salts

    Directory of Open Access Journals (Sweden)

    А.А. Safonov

    2017-12-01

    Full Text Available Thanks to the rapid development of science, humanity has achieved remarkable success in various fields. This also applies to the synthesis of biological compounds. Over the centuries, scientists have invented many methods and drugs that are being actively used to date. Derivatives of 1,2,4-triazole can be the foundation for the manufacture of new native drugs that will compete with foreign ones. The aim of work was synthesis and confirmation the structure of 2-((4-(R-amino-5-(thiophen-2-ylmethyl-4H-1,2,4-triazol-3-ylthioacetate acids salts. Materials and methods. As starting substances we used 2-((4-(R-amino-5-(thiophen-2-ylmethyl-4H-1,2,4-triazol-3-ylthioacetic acids, which were synthesized by previously described methods. The structure of synthesized compounds was confirmed by the complex use of modern physical-chemical methods of analysis: elemental analysis, 1H-NMR spectroscopy, HPLC-MS. Results. Salts of 2-((4-(R-amino-5-(thiophen-2-ylmethyl-4H-1,2,4-triazol-3-ylthioacetic acids were synthesized by the interaction of the appropriate acids with organic (morpholin, methanamin, 2-hydroxyethanamin, inorganic basics (aqueous ammonia solution, sodium hydroxide and salts (zinc sulfate, ferrum (III chloride, magnesium sulfate, copper (II sulfate in alcoholic or aqueous media. Conclusions. A series of novel 2-((4-(R-amino-5-(thiophen-2-ylmethyl-4H-1,2,4-triazol-3-ylthioacetic acids salts were synthesized. The structure of synthesized compounds is established using modern physical-chemical methods of analysis.

  9. Phase equilibria and excess molar volumes of tetrahydrofuran (1) + deuterium oxide (2)

    International Nuclear Information System (INIS)

    Lejcek, P.; Matous, J.; Novak, J.P.; Pick, J.

    1975-01-01

    Vapour + liquid equilibrium at 313.15 and 333.15K, liquid + liquid equilibrium throughout the whole region of limited miscibility, and excess molar volumes at 298.15K have been studied for tetrahydrofuran + deuterium oxide. The mixtures show large positive deviations from Raoult's law and a closed loop of limited miscibility. The modified Redlich-Kister equation has been used for the correlation of the vapour + liquid equilibrium. The computation has been carried out according to a recently proposed procedure which makes it possible to obtain such constants of the correlation relation which are not inconsistent with physical reality, i.e. with the complete miscibility (partial delta 2 G/deltax 1 2 >0) under experimental conditions. Thermodynamic consistency was checked by the classical Redlich-Kister test and the one proposed by Ulrichson and Stevenson. Excess molar volumes are negative at all compositions with a point of inflexion in the water-rich region which indicates the extremes in partial molar volumes. (author)

  10. Synthesis of dansyl-labeled probe of thiophene analogue of annonaceous acetogenins for visualization of cell distribution and growth inhibitory activity toward human cancer cell lines.

    Science.gov (United States)

    Kojima, Naoto; Suga, Yuki; Matsumoto, Takuya; Tanaka, Tetsuaki; Akatsuka, Akinobu; Yamori, Takao; Dan, Shingo; Iwasaki, Hiroki; Yamashita, Masayuki

    2015-03-15

    The convergent synthesis of the dansyl-labeled probe of the thiophene-3-carboxamide analogue of annonaceous acetogenins, which shows potent antitumor activity, was accomplished by two asymmetric alkynylations of the 2,5-diformyl THF equivalent with an alkyne having a thiophene moiety and another alkyne tagged with a dansyl group. The growth inhibitory profiles toward 39 human cancer cell lines revealed that the probe retained the biological function of its mother compound, and would be useful for studying cellular activity. Copyright © 2015 Elsevier Ltd. All rights reserved.

  11. Thiophene dendrimer-based low donor content solar cells

    Science.gov (United States)

    Stoltzfus, Dani M.; Ma, Chang-Qi; Nagiri, Ravi C. R.; Clulow, Andrew J.; Bäuerle, Peter; Burn, Paul L.; Gentle, Ian R.; Meredith, Paul

    2016-09-01

    Low donor content solar cells containing polymeric and non-polymeric donors blended with fullerenes have been reported to give rise to efficient devices. In this letter, we report that a dendrimeric donor can also be used in solution-processed low donor content devices when blended with a fullerene. A third generation dendrimer containing 42 thiophene units (42T) was found to give power conversion efficiencies of up to 3.5% when blended with PC70BM in optimized devices. The best efficiency was measured with 10 mole percent (mol. %) of 42T in PC70BM and X-ray reflectometry showed that the blends were uniform. Importantly, while 42T comprised 10 mol. % of the film, it made up 31% of the film by volume. Finally, it was found that solvent annealing was required to achieve the largest open circuit voltage and highest device efficiencies.

  12. Facile electrochemical polymerization of 2-(thiophen-2-yl)furan and the enhanced capacitance properties of its polymer in acetonitrile electrolyte containing boron trifluoride diethyl etherate

    International Nuclear Information System (INIS)

    Mo, Daize; Zhou, Weiqiang; Ma, Xiumei; Xu, Jingkun

    2015-01-01

    Highlights: • The low-potential polymerization of 2-(thiophen-2-yl)furan into polymer (PTFu) was reported. • The electrochemical performance of PTFu was studied in three different electrolytes. • The specific capacitance of PTFu electrode reached 392.0 F g −1 at 5 A g −1 and had 67.0% retention after 500 cycles. • The addition of boron trifluoride diethyl etherate into acetonitrile electrolyte benefited to enhance the specific capacitance and stability of PTFu electrode. - ABSTRACT: In this study, a new simple hybrid poly(2-(thiophen-2-yl)furan) (PTFu) was easily electrodeposited by direct anodic oxidation of 2-(thiophen-2-yl)furan in acetonitrile solution containing 0.1 M lithium perchlorate (LiClO 4 ). The oxidation onset potential of 2-(thiophen-2-yl)furan monomer in this medium was measured to be 0.90 V, which was lower than those of thiophene (1.47 V) and furan (1.28 V). The structure and morphology of PTFu were characterized by Ultraviolet–visible spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, and thermal analysis. The electrochemical capacitance properties of PTFu electrode in three electrolytes were also investigated by cyclic voltammetry, galvanostatic charge/discharge and electrochemical impedance spectroscope techniques. The electrochemical results showed that the specific capacitance of PTFu electrode was enhanced to 392.0 F g −1 from 249.4 F g −1 at 5 A g −1 and the cycling stability was also enhanced to 67.0% retention from 25.5% retention after 500 cycles when the equivalent boron trifluoride diethyl etherate (BFEE) was added into the acetonitrile electrolyte. Furthermore, the PTFu electrode in ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (BmimPF 6 ) showed a lower specific capacitance value (209.4 F g −1 at 5 A g −1 ) and an improved stability (67.6% retention after 600 cycles). These results indicated that the conducting polymers based on furan should be a promising

  13. Synergistic Diazo-OH Insertion/Conia-Ene Cascade Catalysis for the Stereoselective Synthesis of γ-Butyrolactones and Tetrahydrofurans.

    Science.gov (United States)

    Hunter, Arianne C; Schlitzer, Steven C; Sharma, Indrajeet

    2016-11-02

    A novel and highly efficient diazo-OH insertion/Conia-ene cascade reaction of readily available homopropargylic acids and alcohols with diazo carbonyl compounds is described. The cascade reaction involves a synergistic Rh/Ag/Au catalyst cocktail and proceeds instantly with a variety of substituted diazo compounds and acids/alcohols to provide functionalized γ-butyrolactones and tetrahydrofurans with complete regio- and stereoselectivity. The unprecedented rate-enhancement, complete stereoselectivity, and the enabling of new Conia-ene cyclizations suggest a concerted [4+1]-cycloaddition reaction pathway under synergistic (Rh/Ag/Au)-catalysis conditions. © 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. Volatile Fuel Hydrocarbons and MTBE in the Environment

    Science.gov (United States)

    Cozzarelli, I. M.; Baehr, A. L.

    2003-12-01

    Petroleum hydrocarbons (hydrocarbons that result from petroleum products such as oil, gasoline, or diesel fuel) are among the most commonly occurring and widely distributed contaminants in the environment. Volatile hydrocarbons are the lighter fraction of the petroleum hydrocarbons and, together with fuel oxygenates, are most often released from crude oil and liquid petroleum products produced from crude oil. The demand for crude oil stems from the world's ever-growing energy need. From 1970 to 1999, primary energy production of the world grew by 76% (Energy Information Administration, 2001), with fossil fuels (crude oil, natural gas, and coal) accounting for ˜85% of all energy produced worldwide (Figure 1). World crude oil production reached a record 68 million barrels (bbl) per day (1.08×1010 L d-1) in 2000. The world's dependence on oil as an energy source clearly is identified as contributing to global warming and worsening air and water quality. (7K)Figure 1. World primary energy production by source from 1970 to 1999 (Energy Information Administration, 2001). Petroleum products are present in Earth's subsurface as solids, liquids, or gases. This chapter presents a summary of the environmental problems and issues related to the use of liquid petroleum, or oil. The focus is on the sources of volatile hydrocarbons and fuel oxygenates and the geochemical behavior of these compounds when they are released into the environment. Although oxygenates currently in commercial use include compounds other than methyl t-butyl ether (MTBE), such as ethanol (ETOH), most of the information presented here focuses on MTBE because of its widespread occurrence. The environmental impact of higher molecular weight hydrocarbons that also originate from petroleum products is described in (Chapter 9.13, Abrajano et al.).Crude oil occurs within the Earth and is a complex mixture of natural compounds composed largely of hydrocarbons containing only hydrogen and carbon atoms. The minor

  15. Potentiometric and Conductometric Study of Aqueous Solutions of Lithium and Sodium Salts of Poly(thiophen-3-ylacetic acid).

    Science.gov (United States)

    Hostnik, Gregor; Vlachy, Vojko; Bondarev, Dmitrij; Jiří, Vohlídal; Cerar, Janez

    2012-09-01

    The title polymer, PTAA, practically free of ester groups was obtained by oxidative polymerization of methyl thiophen-3-ylacetate and subsequent basic hydrolysis of primary polymer. Poly(thiophen-3-ylacetic acid) has been thoroughly characterized by NMR, IR, Raman, and UV/Vis spectroscopy. The polyacid behavior during neutralization titrations with lithium and sodium hydroxides, carried out under nitrogen atmosphere, has been studied by conductometry and potentiometry. Henderson-Hasselbach plots of potentiometric titration curves show a break point at pH around 6, where the curve slope drops from 1.8 (at lower pH) to a value from 1.05 to 1.3 (at higher pH values). The UV/Vis spectra monitored during back titration show: (i) monotonous decrease of both λmax and εmax as pH decreases, (ii) the presence of the isosbestic point at 401 nm that can be ascribed to conformational transition of PTAA chains, and (iii) absence of the isosbestic point at 392 nm reported previously by other authors.

  16. Synthesis and application of magnetic deep eutectic solvents: Novel solvents for ultrasound assisted liquid-liquid microextraction of thiophene.

    Science.gov (United States)

    Khezeli, Tahere; Daneshfar, Ali

    2017-09-01

    Two novel magnetic deep eutectic solvents (MDESs), comprised of cheap and simple components named [choline chloride/phenol] [FeCl 4 ] and [choline chloride/ethylene glycol] [FeCl 4 ] were prepared and characterized by CHN elemental analysis, proton nuclear magnetic resonance ( 1 H NMR), vibrating sample magnetometery (VSM), Raman, Fourier transform-infrared (FT-IR) and UV-Vis spectrometery. The extraction efficiency of the prepared MDESs has been investigated in ultrasound assisted liquid-liquid microextraction based MDES (UALLME-MDES). Briefly, MDESs were added to n-heptan containing thiophene. Then, MDESs were dispersed in n-heptane by sonication. After that, microdroplets of MDESs were collected by a magnet and the remained concentration of thiophene in n-heptane phase was analyzed by GC-FID. The results indicated that [choline chloride/phenol] [FeCl 4 ] has higher extraction efficiency than [choline chloride/ethylene glycol] [FeCl 4 ]. This work opens a new way to the application of MDESs. Copyright © 2016 Elsevier B.V. All rights reserved.

  17. (E-3-Methyl-6-(3-oxo-3-(thiophen-2-yl-1-propenyl-2(3H-benzothiazolone

    Directory of Open Access Journals (Sweden)

    Yordanka Ivanova

    2016-04-01

    Full Text Available The title compound, (E-3-methyl-6-(3-oxo-3-(thiophen-2-yl-1-propenyl-2(3H-benzothiazolone, was synthesized by Claisen-Schmidt condensation of 3-methyl-2(3H-benzothiazolone-6-carbaldehyde with 2-acetylthiophene in 94% yield. The structure of the target compound was confirmed using 1H-NMR, 13C-NMR, IR, MS, and elemental analysis.

  18. Ethyl 2-cyano-5-oxo-5-(thiophen-2-yl-3-(3,4,5-trimethoxyphenylpentanoate

    Directory of Open Access Journals (Sweden)

    M. Prabhuswamy

    2012-12-01

    Full Text Available In the title compound, C21H23NO6S, the dihedral angle between the thiopene and benzene rings is 88.66 (6°. In the crystal, molecules are connected by C—H...N and C—H...O hydrogen bonds, forming a tape along [10-1]. In addition, C—H...π and π–π stacking [centroid–centroid distance = 3.879 (2 Å between the thiophene rings] interactions are observed.

  19. Designing thiophene-based azomethine oligomers with tailored properties: Self-assembly and charge carrier mobility

    DEFF Research Database (Denmark)

    Kiriy, N.; Bocharova, V.; Kiriy, A.

    2004-01-01

    This paper describes synthesis and characterization of two thiophene-based azomethines designed to optimize solubility, self-assembly, and charge carrier mobility. We found that incorporation of azomethine and amide moieties in the alpha,omega-position, and hexyl chains in the beta-position of th...... with the mobilities of the best organic semiconductors. All these significant differences in properties of related compounds can be attributed to the hydrogen bonding between QT-amide molecules responsible for the observed self-assembly....

  20. Probing topological electronic effects in catalysis: thiophene adsorption on NiMoS and CoMoS clusters

    Energy Technology Data Exchange (ETDEWEB)

    Borges Junior, Itamar; Silva, Alexander M., E-mail: itamar@ime.eb.br [Instituto Militar de Engenharia (IME), Rio de Janeiro-RJ (Brazil). Programa de Pos-Graduacao em Engenharia de Defesa

    2012-10-15

    A general two-step theoretical approach to study electronic redistributions in catalytic processes is presented. In the first step, density functional theory (DFT) is used to fully optimize two geometries: the cluster representing the catalyst and the cluster plus adsorbed molecule system. In the second step, the converged electron density is divided into multipoles centered on atomic sites according to a distributed multipole analysis which provides detailed topological information on the charge redistribution of catalyst and molecule before and after adsorption. This approach is applied to thiophene adsorption on the 10{sup -}10 metal edge of Ni(Co)MoS catalysts and compared to the same reaction on bare MoS{sub 2}. Calculated adsorption energies, geometries and multipole analysis indicate weak thiophene chemisorption on both cases. A Coulombic bond model showed that surface metal-sulfur bond strengths in Ni(Co)MoS promoted catalysts are considerably smaller than in bare MoS{sub 2}, thus confirming the origin of the enhancement of hydrodesulfurization (HDS) activity in these catalysts. (author)

  1. Large-area photovoltaics based on low band gap copolymers of thiophene and benzothiadiazole or benzo-bis(thiadiazole)

    DEFF Research Database (Denmark)

    Bundgaard, Eva; Krebs, Frederik C

    2007-01-01

    to give poor devices when employed in bulk heterojunctions with PCBM. This was linked to a poor alignment of the energy levels in 2 with that of the electrodes and PCBM, showing that the requirement for a control of the positions of the energy levels becomes increasingly important as the band gap......Large-area solar cells (active area = 3 and 10cm(2)) were prepared with low band gap polymers based on thiophene and benzothiadiazole (1) or thiophene and benzo-bis(thiadiazole) (2). The band gaps of the polymers were 1.65 and 0.67 eV, respectively. The best photovoltaic performance was obtained...... for the device ITO/PEDOT/1:PCBM (1:2)/Al with an active area of 3 cm(2). The efficiency of the device was 0.62%. This is a high efficiency for a low band gap polymer in a large-area organic solar cell and thus polymer I is a very promising material for organic solar cells. The devices based on 2 were found...

  2. Thiophene-rich fused-aromatic thienopyrazine acceptor for donor–acceptor low band-gap polymers for OTFT and polymer solar cell applications

    KAUST Repository

    Mondal, Rajib; Becerril, Hector A.; Verploegen, Eric; Kim, Dongwook; Norton, Joseph E.; Ko, Sangwon; Miyaki, Nobuyuki; Lee, Sangjun; Toney, Michael F.; Bré das, Jean-Luc; McGehee, Michael D.; Bao, Zhenan

    2010-01-01

    Thiophene enriched fused-aromatic thieno[3,4-b]pyrazine systems were designed and employed to produce low band gap polymers (Eg = 1.0-1.4 eV) when copolymerized with fluorene and cyclopentadithiophene. The copolymers are mainly investigated

  3. Preparation, characterization of Mo catalysts supported on Ni- containing calcium deficient hydroxyapatite and reactivity for the thiophene HDS reaction

    Directory of Open Access Journals (Sweden)

    Cherif A.

    2013-09-01

    Full Text Available Ni-containing Calcium Hydroxyapatite (NiCaHAp; 3.31 wt.% Ni was synthesized by coprecipitation and used as catalyst support. Molybdenum was supported on NiCaHAp by impregnation using ammonium heptamolybdate. The prepared catalysts Mo(x/NiCaHAp (x: 2 to 8 wt % in Mo were characterized by elemental analysis, XRD, FT-IR, N2 adsorption-desorption and TEM-EDX. The catalysts were sulfided in-situ at 673 K under flowing H2S/H2 (15 Vol.% H2S and tested in hydrodesulfurization (HDS of thiophene at 673 K. The main XRD peaks of hydroxyapatite CaHAp phase were observed in all samples and a peak due probably to crystalline MoO3 phase was also identified from the results. However, no crystalline phase of NiO was found for the catalysts, which showed its Ni species were highly dispersed. The sulfided catalysts Mo(x/NiCaHAp presented are active in HDS of thiophene, despite the presence of some large MoO3 crystallites and incomplete sulfidation. This activity may be due to interaction of NiO and MoO3 on CaHAp resulting in the formation of Ni-Mo-S phase under flowing H2S/H2. When the molybdenum content increased the HDS activity increasead slightly, which was caused by the agglomeration of MoO3. The Mo(8/NiCaHAp catalyst is about two times less active for thiophene HDS than the commercial NiMoP/Al2O3.

  4. Study on aggregation and electric properties in the micro-region of functionalized dithieno[2, 3-b: 3′, 2′-d]thiophene (DTT) oligomers

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Xiaohong; Huang, Xiaowei; Zhang, Jiajia; Lu, Zhijuan; Wang, Hua; Du, Zuliang, E-mail: zld@henu.edu.cn [Key Laboratory for Special Functional Materials of Ministry of Education, Henan University, Kaifeng, 475004 (China)

    2016-07-15

    Three kinds of 2,5,-diphenyl-dithienol[2, 3-b: 3′, 2′-d]thiophene (DP-DTT), 2,5,-distyryl-dithienol[2, 3-b: 3′, 2′-d]thiophene (DEP-DTT) and 2,5,-thienyl-dithienol[2, 3-b: 3′, 2′-d]thiophene (DET-DTT) micro-region structure and electronic properties were studied. Thin films of these functionalized DTT oligomers were prepared in a one-step drop-casting deposition onto highly oriented pyrolytic graphite substrates. The surface structure of these films was characterized by atomic force microscopy (AFM). Conducting probe atomic force microscope (C-AFM) and Kelvin probe force microscope (KFM) were both used to characterize the electronic transport behavior and surface potential distribution. The substituents of DTT oligomers can greatly affect their aggregation and the hopping conductance mechanism was used to explain the Au-DTTs-HOPG junctions. KFM investigation revealed that these oligomers with different substituents have different highest occupied molecular orbital energy levels. The corresponding theoretical analysis reveals similar result to KFM characterization. The I-V results indicated that the aggregates of molecules were the dominating factor to their micro-region electrical transport.

  5. Molecular Structure and Electronic Properties of Porphyrin-Thiophene-Perylene Using Quantum Chemical Calculation

    Directory of Open Access Journals (Sweden)

    Tatiya Chokbunpiam

    2010-01-01

    Full Text Available This study aimed to design a new series of compounds consisting of a porphyrin macrocycle linked to a perylene unit via a thiophenic bridge. The structural and electronic properties of the molecules, and the effects of mono- and di-substituents R on C3 and R′ on C4 of the thiophene ring were investigated using a quantum calculation approach. The results from the method validation revealed that using the density functional theory approach at B3LYP/6–31G(d data set was the optimal one, considering the accuracy attained and maintaining the computer time required within tractable limits. The results from the B3LYP/6–31G(d approach indicated that significant changes of the torsion angle between the molecular planes of the porphyrin and perylene rings, compared to that of the unsubstituted derivatives, were found in the di-substituted systems bearing R = R′ = −OCH3 and −NH2, and in a mono-substituted system having R = −H and R′=−NH2. The symmetric di-substitution does not provide a significantly lower HOMO-LUMO energy gap (ΔEg. Noticeable decreases in ΔEg were found only with the substitution patterns of: R, R′ = −OCH3, −H; −OH, −H; −N(CH32, −H; −H, −NH2. UV-visible spectra of all derivatives exhibited characteristic absorption maxima of the free bases of porphyrin and perylene.

  6. Study of a thiophene-based polymer for optoelectronic applications

    International Nuclear Information System (INIS)

    Cheylan, S.; Fraleoni-Morgera, A.; Puigdollers, J.; Voz, C.; Setti, L.; Alcubilla, R.; Badenes, G.; Costa-Bizzarri, P.; Lanzi, M.

    2006-01-01

    A thiophene-based conjugated polymer bearing a cyano group (-CN) as a side chain substituent was successfully synthesized. The polymer evidences an excellent film ability from various organic solvents as well as an enhanced photoluminescence. The polymer has been characterized optically (Fourier Transformed Infrared spectroscopy, absorption and photoluminescence) in solution and in film, while X-ray diffraction measurements (XRD) of thin films were performed to investigate its bulk morphological features. From the absorption edge of the spectrum of a thin polymer film, the optical band gap of the polymer is estimated to be 2.0 eV, which corresponds to orange emission. Furthermore, a single layer light emitting diode (LED) was fabricated. The device produced bright stable electroluminescence at room temperature. All of the results indicate that this polymer is a promising emissive material for application in polymeric LEDs

  7. Conductive and photoactive nature of conjugated polymer based on thiophene functionalized thiazole or benzothiadiazole

    Directory of Open Access Journals (Sweden)

    K. Mahesh

    2018-03-01

    Full Text Available New poly (thiophene vinyl thiazole (PTVT and poly (thiophene vinyl benzothiadiazole (PTVBT was synthesized by Wittig condensation route. The absorption maximum of PTVT and PTVBT appeared at 376 and 410 nm in a solution state, and it was red-shifted to 417 and 510 nm in a thin film state. The optical band gaps were 1.7 and 1.5 eV calculated from thin film absorption edges of the polymer. The photoluminescence spectra of PTVT and PTVBT have an emission peak at 457 nm with bluish green and 487 nm with greenish-yellow fluorescence in THF solution. Both polymers showed a short fluorescence decay time (τ1 of 2.31 and 0.73 ns respectively. Furthermore, the aggregation-caused quenching (ACQ phenomenon observed in both polymers in decreased fluorescence intensity with different water fractions. The lower electrochemical band gaps were achieved for both polymers (1.4, and 1.3 eV from cyclic voltammetry. Both polymers have a granular shaped morphology with good surface roughness was observed using AFM. High thermal stability was observed with 8% weight loss at 400 °C for PTVT and 6% weight loss at 460°C for PTVBT. The highest electrical conductivity was observed from electrochemical impedance measurement which was 7.68·10–6 Ω–1·cm–1 for PTVBT.

  8. Thermodynamic promotion of carbon dioxide-clathrate hydrate formation by tetrahydrofuran, cyclopentane and their mixtures

    DEFF Research Database (Denmark)

    Herslund, Peter Jørgensen; Thomsen, Kaj; Abildskov, Jens

    2013-01-01

    Gas clathrate hydrate dissociation pressures are reported for mixtures of carbon dioxide, water and thermodynamic promoters forming structure II hydrates.Hydrate (H)-aqueous liquid (Lw)-vapour (V) equilibrium pressures for the ternary system composed of water, tetrahydrofuran (THF), and carbon....... It is shown that upon adding THF to the pure aqueous phase to form a 4mass percent solution, the equilibrium pressure of the formed hydrates may be lowered compared to the ternary system of water, cyclopentane and carbon dioxide. © 2013 Elsevier Ltd....... dioxide (CO2), with 5.0mole percent THF in the initial aqueous phase, are presented in the temperature range from 283.3K to 285.2K. At 283.3K, the three-phase equilibrium pressure is determined to be 0.61MPa (absolute pressure).Four-phase hydrate (H)-aqueous liquid (Lw)-organic liquid (La)-vapour (V...

  9. Synthesis, reactions, and antiarrhythmic activities of some novel pyrimidines and pyridines fused with thiophene moiety

    OpenAIRE

    AMR, Abdel-Galil El-Sayed; ABDEL-HAFEZ, Naglaa Abdel-Samei

    2009-01-01

    We report herein the synthesis and antiarrhythmic activities of some newly synthesized heterocyclic theino[2,3-c]pyrimidine and theino[2,3-c]pyridine derivatives fused with thiophene moiety. Initially the acute toxicity of the compounds was assayed via the determination of their LD50. The antiarrhythmic activities for the compounds were determined and all the tested compounds were found more potent than Procaine amide\\textregistered and Lidocaine\\textregistered as positive antiarrhyth...

  10. Synthesis, reactions, and antiarrhythmic activities of some novel pyrimidines and pyridines fused with thiophene moiety

    OpenAIRE

    AMR, Abdel-Galil El-Sayed; ABDEL-HAFEZ, Naglaa Abdel-Samei; MOHAMED, Salwa Fahem; ABDALLA, Mohamed Mostafa

    2014-01-01

    We report herein the synthesis and antiarrhythmic activities of some newly synthesized heterocyclic theino[2,3-c]pyrimidine and theino[2,3-c]pyridine derivatives fused with thiophene moiety. Initially the acute toxicity of the compounds was assayed via the determination of their LD50. The antiarrhythmic activities for the compounds were determined and all the tested compounds were found more potent than Procaine amide\\textregistered and Lidocaine\\textregistered as positive antiarrhyth...

  11. A high selective cataluminescence sensor for the determination of tetrahydrofuran vapor

    Science.gov (United States)

    Cao, Xiaoan; Dai, Huimei; Chen, Suilin; Zeng, Jiayi; Zhang, Keke; Sun, Yan

    2013-02-01

    A novel tetrahydrofuran (THF) vapor sensor was designed based on the cataluminescence (CTL) of THF on nanosized γ-Al2O3/MgO (mol ratio = 1.5:1). SEM and XRD were applied for its characterization. We found that the CTL was strongly produced when THF vapor flowed through a nanosized Al-Mg mixed-metal oxide surface, while the CTL was weakly generated when THF vapor flowed through a single nanosized γ-Al2O3 or MgO surface. Quantitative analysis was performed at an optimal temperature of 279 °C, a wavelength of 460 nm and a flow rate of 360 mL min-1. The linear range of the CTL intensity versus concentrations of THF vapor was 1.0-3000 mL m-3 with a detection limit of 0.67 mL m-3. No (or only very low) interference was observed by formaldehyde, methanol, ethanol, benzene, toluene, ethyl acetate, ammonia, cyclohexane, chloroform, glycol armour ether, glycol ether, isopropyl ether and n-butyl ether or acetic acid. Since the response of the sensor was rapid and the system was easy to handle, we believe that the sensor has great potential for real-world use.

  12. Ultrathin regioregular poly(3-hexyl thiophene) field-effect transistors

    DEFF Research Database (Denmark)

    Sandberg, H.G.O.; Frey, G.L.; Shkunov, M.N.

    2002-01-01

    Ultrathin films of regioregular poly(3-hexyl thiophene) (RR-P3HT) were deposited through a dip-coating technique and utilized as the semiconducting film in field-effect transistors (FETs). Proper selection of the substrate and solution concentration enabled the growth of a monolayer-thick RR-P3HT...... film. Atomic force microscopy (AFM), U-V-vis absorption spectroscopy, X-ray reflectivity, and grazing incidence diffraction were used to study the growth mechanism, thickness and orientation of self-organized monolayer thick RR-P3HT films on SiO2 surfaces. Films were found to adopt a Stranski......-Krastanov-type growth mode with formation of a very stable first monolayer. X-ray measurements show that the direction of pi-stacking in the films (the (010) direction) is parallel to the substrate, which is the preferred orientation for high field-effect carrier mobilities. The field-effect mobilities in all ultrathin...

  13. Design and Synthesis of Novel Antimicrobial Acyclic and Heterocyclic Dyes and Their Precursors for Dyeing and/or Textile Finishing Based on 2-N-Acylamino-4,5,6,7-tetrahydro-benzo[b]thiophene Systems

    Directory of Open Access Journals (Sweden)

    Rafat Milad Mohareb

    2011-07-01

    Full Text Available A series of novel polyfunctionalized acyclic and heterocyclic dye precursors and their respective azo (hydrazone counterpart dyes and dye precursors based on conjugate enaminones and/or enaminonitrile moieties were synthesized. The dyes and their precursors are based on 2-cyano-N-(3-cyano-4,5,6,7-tetrahydrobenzo[b]thiophen-2-yl-acetamide, 2-ethoxycarbonyl-N-(3-cyano-4,5,6,7-tetrahydrobenzo[b]thiophen-2-yl-acetamide or 2-phenylcarbamoyl-N-(3-cyano-4,5,6,7-tetrahydrobenzo[b]thiophen-2-yl-acetamide systems as precursors. The latter compounds were used to synthesize polyfunctional thiophene-, thiazole-, pyrazole, pyridine-, pyrimidine-, oxazine-, as well as acyclic moieties. The dyes and dye precursors were characterized by elemental analysis and spectral methods. All dyes and their precursors were screened in vitro and evaluated for both their antibacterial and antifungal activities. MIC data of the novel dye systems and their respective precursors showed significant antimicrobial activity against most tested organisms. Some compounds exhibited comparable or even higher efficiency than selected standards. Dyes were applied at 5% depth for disperse dyeing of nylon, acetate and polyester fabrics. Their spectral characteristics and fastness properties were measured and evaluated.

  14. Resonant stimulation of Raman scattering from single-crystal thiophene/phenylene co-oligomers

    International Nuclear Information System (INIS)

    Yanagi, Hisao; Marutani, Yusuke; Matsuoka, Naoki; Hiramatsu, Toru; Ishizumi, Atsushi; Sasaki, Fumio; Hotta, Shu

    2013-01-01

    Amplified Raman scattering was observed from single crystals of thiophene/phenylene co-oligomers (TPCOs). Under ns-pulsed excitation, the TPCO crystals exhibited amplified spontaneous emission (ASE) at resonant absorption wavelengths. With increasing excitation wavelength to the 0-0 absorption edge, the stimulated resonant Raman peaks appeared both in the 0-1 and 0-2 ASE band regions. When the excitation wavelength coincided with the 0-1 ASE band energy, the Raman peaks selectively appeared in the 0-2 ASE band. Such unusual enhancement of the 0-2 Raman scattering was ascribed to resonant stimulation via vibronic coupling with electronic transitions in the uniaxially oriented TPCO molecules

  15. A Tetrahydrofuran-selective Optical Solvent Sensor Based on Solvatochromic Polydiacetylene

    International Nuclear Information System (INIS)

    Park, Dong-Hoon; Kim, Bubsung; Kim, Jong-Man

    2016-01-01

    Polydiacetylene (PDAs) have received great attention as colorimetric sensors since these conjugated polymers undergo a blue-to-red color change upon various chemical/biochemical and physical stimuli. PDAs have been reported to display thermochromism (heat), solvatochromism (solvent), mechanochromism (mechanical strain) as well as magnetochromism (magnetic force) electrochromism (electric current), and affinochromism (ligand-receptor interaction). The solvent induced color change of PDA is generally non-specific and irreversible. For instance, the PDA derived from 10,12-pentacosadiynoic acid (PCDA) undergoes a blue-to-red (or purple) color change upon exposure to many common organic solvents including tetrahydrofuran (THF), chloroform, dichloromethane, acetone, methanol (MeOH), ethyl acetate (EA), and diethyl ether. The results obtained from Raman spectral analysis suggests that exposure to THF causes the distortion of the backbone of the polymer main chain and some conformational changes in the aliphatic side chain. Solvatochromism of a PDA is closely related to the solubility of a diacetylene monomer. PDA undergoes a color change when the dissolution of unpolymerized monomers causes some void in the PDA supramolecules. Since PCDA-mBzA has a good solubility only in THF, colorimetric transition of PDA occurs only in response to THF. Since solubility of a diacetylene monomer can be manipulated by structural change of the monomer, we believe the strategy described in current investigation should be useful for the development of solvent-specific PDA sensor systems

  16. A Tetrahydrofuran-selective Optical Solvent Sensor Based on Solvatochromic Polydiacetylene

    Energy Technology Data Exchange (ETDEWEB)

    Park, Dong-Hoon; Kim, Bubsung; Kim, Jong-Man [Hanyang University, Seoul (Korea, Republic of)

    2016-06-15

    Polydiacetylene (PDAs) have received great attention as colorimetric sensors since these conjugated polymers undergo a blue-to-red color change upon various chemical/biochemical and physical stimuli. PDAs have been reported to display thermochromism (heat), solvatochromism (solvent), mechanochromism (mechanical strain) as well as magnetochromism (magnetic force) electrochromism (electric current), and affinochromism (ligand-receptor interaction). The solvent induced color change of PDA is generally non-specific and irreversible. For instance, the PDA derived from 10,12-pentacosadiynoic acid (PCDA) undergoes a blue-to-red (or purple) color change upon exposure to many common organic solvents including tetrahydrofuran (THF), chloroform, dichloromethane, acetone, methanol (MeOH), ethyl acetate (EA), and diethyl ether. The results obtained from Raman spectral analysis suggests that exposure to THF causes the distortion of the backbone of the polymer main chain and some conformational changes in the aliphatic side chain. Solvatochromism of a PDA is closely related to the solubility of a diacetylene monomer. PDA undergoes a color change when the dissolution of unpolymerized monomers causes some void in the PDA supramolecules. Since PCDA-mBzA has a good solubility only in THF, colorimetric transition of PDA occurs only in response to THF. Since solubility of a diacetylene monomer can be manipulated by structural change of the monomer, we believe the strategy described in current investigation should be useful for the development of solvent-specific PDA sensor systems.

  17. The Catalytic Conversion of Thiophenes over Large H-ZSM-5 Crystals: An X-Ray, UV/Vis, and Fluorescence Microspectroscopic Study

    NARCIS (Netherlands)

    Kox, M.H.F.; Mijovilovich, A.E.; S ättler, J.J.H.B.; Stavitski, I.; Weckhuysen, B.M.

    2013-01-01

    X-ray absorption, UV/Vis, and fluorescence microspectroscopy have been used to characterize the catalytic conversion of thiophene derivatives within the micropores of an individual H-ZSM-5 zeolite crystal. Space-resolved information into the Si/ Al ratios and sulfur content was provided by X-ray

  18. Origin and Distribution of Thiophenes and Furans in Gas Discharges from Active Volcanoes and Geothermal Systems

    Directory of Open Access Journals (Sweden)

    Franco Tassi

    2010-03-01

    Full Text Available The composition of non-methane organic volatile compounds (VOCs determined in 139 thermal gas discharges from 18 different geothermal and volcanic systems in Italy and Latin America, consists of C2–C20 species pertaining to the alkanes, alkenes, aromatics and O-, S- and N-bearing classes of compounds. Thiophenes and mono-aromatics, especially the methylated species, are strongly enriched in fluids emissions related to hydrothermal systems. Addition of hydrogen sulphide to dienes and electrophilic methylation involving halogenated radicals may be invoked for the formation of these species. On the contrary, the formation of furans, with the only exception of C4H8O, seems to be favoured at oxidizing conditions and relatively high temperatures, although mechanisms similar to those hypothesized for the production of thiophenes can be suggested. Such thermodynamic features are typical of fluid reservoirs feeding high-temperature thermal discharges of volcanoes characterised by strong degassing activity, which are likely affected by conspicuous contribution from a magmatic source. The composition of heteroaromatics in fluids naturally discharged from active volcanoes and geothermal areas can then be considered largely dependent on the interplay between hydrothermal vs. magmatic contributions. This implies that they can be used as useful geochemical tools to be successfully applied in both volcanic monitoring and geothermal prospection.

  19. Origin and distribution of thiophenes and furans in gas discharges from active volcanoes and geothermal systems.

    Science.gov (United States)

    Tassi, Franco; Montegrossi, Giordano; Capecchiacci, Francesco; Vaselli, Orlando

    2010-03-31

    The composition of non-methane organic volatile compounds (VOCs) determined in 139 thermal gas discharges from 18 different geothermal and volcanic systems in Italy and Latin America, consists of C(2)-C(20) species pertaining to the alkanes, alkenes, aromatics and O-, S- and N-bearing classes of compounds. Thiophenes and mono-aromatics, especially the methylated species, are strongly enriched in fluids emissions related to hydrothermal systems. Addition of hydrogen sulphide to dienes and electrophilic methylation involving halogenated radicals may be invoked for the formation of these species. On the contrary, the formation of furans, with the only exception of C(4)H(8)O, seems to be favoured at oxidizing conditions and relatively high temperatures, although mechanisms similar to those hypothesized for the production of thiophenes can be suggested. Such thermodynamic features are typical of fluid reservoirs feeding high-temperature thermal discharges of volcanoes characterised by strong degassing activity, which are likely affected by conspicuous contribution from a magmatic source. The composition of heteroaromatics in fluids naturally discharged from active volcanoes and geothermal areas can then be considered largely dependent on the interplay between hydrothermal vs. magmatic contributions. This implies that they can be used as useful geochemical tools to be successfully applied in both volcanic monitoring and geothermal prospection.

  20. Exciton Transport Simulations in Phenyl Cored Thiophene Dendrimers

    Science.gov (United States)

    Kim, Kwiseon; Erkan Kose, Muhammet; Graf, Peter; Kopidakis, Nikos; Rumbles, Garry; Shaheen, Sean E.

    2009-03-01

    Phenyl cored 3-arm and 4-arm thiophene dendrimers are promising materials for use in photovoltaic devices. It is important to understand the energy transfer mechanisms in these molecules to guide the synthesis of novel dendrimers with improved efficiency. A method is developed to estimate the exciton diffusion lengths for the dendrimers and similar chromophores in amorphous films. The approach exploits Fermi's Golden Rule to estimate the energy transfer rates for an ensemble of bimolecular complexes in random orientations. Using Poisson's equation to evaluate Coulomb integrals led to efficient calculation of excitonic couplings between the transition densities. Monte-Carlo simulations revealed the dynamics of energy transport in the dendrimers. Experimental exciton diffusion lengths of the dendrimers range 10 ˜ 20 nm, increasing with the size of the dendrimer. Simulated diffusion lengths correlate well with experiments. The chemical structure of the chromophore, the shape of the transition densities and the exciton lifetime are found to be the most important factors that determine the exciton diffusion length in amorphous films.

  1. Theoretical Study of the π-Bridge Influence with Different Units of Thiophene and Thiazole in Coumarin Dye-Sensitized Solar Cells

    Directory of Open Access Journals (Sweden)

    Rody Soto-Rojo

    2016-01-01

    Full Text Available Eight coumarin derivative dyes were studied by varying the π-bridge size with different thiophene and thiazole units for their potential use in dye-sensitized solar cells (DSSC. Geometry optimization, the energy levels and electron density of the Highest Occupied Molecular Orbital and the Lowest Unoccupied Molecular Orbital, and ultraviolet-visible absorption spectra were calculated by Density Functional Theory (DFT and Time-Dependent-DFT. All molecular properties were analyzed to decide which dye was the most efficient. Furthermore, chemical reactivity parameters, such as chemical hardness, electrophilicity index, and electroaccepting power, were obtained and analyzed, whose values predicted the properties of the dyes in addition to the rest of the studied molecular properties. Our calculations allow us to qualitatively study dye molecules and choose the best for use in a DSSC. The effects of π-bridges based on thiophenes, thiazoles, and combinations of the two were reviewed; dyes with three units mainly of thiazole were chosen as the best photosensitizers for DSSC.

  2. Solvent polarity effects on supramolecular chirality of a polyfluorene-thiophene copolymer.

    Science.gov (United States)

    Hirahara, Takashi; Yoshizawa-Fujita, Masahiro; Takeoka, Yuko; Rikukawa, Masahiro

    2018-06-01

    This study demonstrates the supramolecular chirality control of a conjugated polymer via solvent polarity. We designed and synthesized a chiral polyfluorene-thiophene copolymer having two different chiral side chains at the 9-position of the fluorene unit. Chiral cyclic and alkyl ethers with different polarities were selected as the chiral side chains. The sign of the circular dichroism spectra in the visible wavelength region was affected by the solvent system, resulting from the change of supramolecular structure. The estimation of the solubility parameter revealed that the solubility difference of the side chains contributed to the change of the circular dichroism sign, which was also observed in spin-coated films prepared from good solvents having different polarities. © 2018 Wiley Periodicals, Inc.

  3. Interactions of a zwitterionic thiophene-based conjugated polymer with surfactants

    DEFF Research Database (Denmark)

    Costa, Telma; De Azevedo, Diego; Stewart, Beverly

    2015-01-01

    In this paper we investigate the optical and structural properties of a zwitterionic poly[3-(N-(4-sulfonato-1-butyl)-N,N-diethylammonium)hexyl-2,5-thiophene] (P3SBDEAHT) conjugated polyelectrolyte (CPE) and its interaction in water with surfactants, using absorption, photoluminescence (PL......), electrical conductivity, molecular dynamics simulations (MDS) and small-angle X-ray scattering (SAXS). Different surfactants were studied to evaluate the effect of the head group and chain length on the self-assembly. PL data emphasize the importance of polymer-surfactant electrostatic interactions...... in the formation of complexes. Nevertheless, conductivity and MDS data have shown that nonspecific interactions also play an important role. These seem to be responsible for the spatial position of the surfactant tail in the complex and, eventually, for breaking-up P3SBDEAHT aggregates. SAXS measurements on P3...

  4. Activity coefficients at infinite dilution measurements for organic solutes and water in the ionic liquid 4-methyl-N-butyl-pyridinium bis(trifluoromethylsulfonyl)-imide

    International Nuclear Information System (INIS)

    Domanska, Urszula; Marciniak, Andrzej

    2009-01-01

    The activity coefficients at infinite dilution, γ 13 ∞ for 36 solutes: alkanes, cycloalkanes, alkenes, alkynes, aromatic hydrocarbons, alcohols, thiophene, tetrahydrofuran, ethers, acetone, and water in the ionic liquid 4-methyl-N-butyl-pyridinium bis(trifluoromethylsulfonyl)-imide [bmPY][NTf 2 ] were determined by gas-liquid chromatography at temperatures from 298.15 K to 368.15 K. The partial molar excess enthalpies at infinite dilution values ΔH 1 E,∞ were calculated from the experimental γ 13 ∞ values obtained over the temperature range. The selectivity for different separation problems were calculated from the γ 13 ∞ and compared to the literature values for other ionic liquids, N-methyl-2-pyrrolidinone (NMP) and sulfolane.

  5. The chiroptical properties of chiral substituted poly[3-((3S)-3,7-dimethyloctyl)thiophene] as a function of film thickness

    NARCIS (Netherlands)

    Lakhwani, G.; Koeckelberghs, G.; Meskers, S.C.J.; Janssen, R.A.J.

    2007-01-01

    Circular dichroism (CD) and circular polarization of the luminescence (CPL) of spin coated films of chiral, regioregular poly[3-((3S)-3,7-dimethyloctyl)thiophene] are investigated as a function of their thickness (50–500 nm). The dissymmetry factors for absorption (gabs) and emission (glum) do not

  6. p-TSA/Base-Promoted Propargylation/Cyclization of β-Ketothioamides for the Regioselective Synthesis of Highly Substituted (Hydro)thiophenes.

    Science.gov (United States)

    Nandi, Ganesh Chandra; Singh, Maya Shankar

    2016-07-15

    Metal-free, p-toluenesulfonic acid (p-TSA)-mediated, straightforward propargylation of β-ketothioamides with aryl propargyl alcohol has been achieved at room temperature. In addition, the reaction also provided thiazole rings as byproducts. Furthermore, the propargylated thioamides undergo intramolecular 1,5-cyclization to afford fully substituted (hydro)thiophenes in the presence of base. Notably, the approach is pot, atom, and step economical (PASE).

  7. Synthesis, physical-chemical properties of 2-((4-R-5-(thiophene-2-ylmethyl-4H-1,2,4-triazole-3-ylthioacetohydrazides

    Directory of Open Access Journals (Sweden)

    O. A. Suhak

    2017-04-01

    Full Text Available Aim. Analysis of the scientific literature over the past decade has shown that large synthetic possibilities towards creating new and effective drug substances have heterocyclic compounds, in particular the derivatives of 1,2,4-triazole. 1,2,4-Triazole is a structural fragment of many synthetic drugs. The special interest cause ylidene hydrazides of 2-(5-R-1,2,4-triazole-3-ylthioacetic acids as potential biologically active compounds, among which highly effective medicines can be found. With the aim of finding new biologically active compounds the derivatives of 2-((4-R-5-(thiophene-2-ylmethyl-4H-1,2,4-triazole-3-ylthioaceticohydrazides have been synthesized, their physical-chemical properties have been studied with the use of modern methods, namely elemental analysis, IR,1H-NMR spectroscopy, and their individuality by HPLC-MS. Materials and methods. N'-R1-еden-2-((4-R-5-(thiophene-2-ylmethyl-4H-1,2,4-triazole-3-ylthioaceticohydrazides were received by adding aromatic (2-BrC6H4, 2,3-(OCH32C6H3, 3,5-(OCH32C6H3, 4-N(CH32C6H4, 3,4-F2C6H3, 2-NO2C6H4,4-NO2C6H4, 4-OHC6H4, 2-OHC6H4, 4-FC6H4, 2-CI-6-FC6H3 or heterocyclic (2-SC4H3, 5-NO2-2-C4H2O aldehyde to an equivalent amount of the appropriate 2-((4-R-5-(thiophene-2-ylmethyl-4H-1,2,4-triazole-3-ylthioaceticohydrazide in the acetic acid medium. The study of physical-chemical properties of obtained compounds was carried out according to the methods outlined in SPU. Chromato-mass-spectral studies were performed on hazarding chromatograph Agilent 1260 Infinity HPLC equipped with mass spectrometer Agilent 6120 with ionization in electro-spray (ESI. Conclusion. This suggests the possibility for further study of biological action of the synthesized compounds. As a result of studies the N'-R1-eden-2-((4-R-5-(thiophene-2-ylmethyl-4H-1,2,4-triazole-3-ylthioaceticohydrazides have been synthesized and their physical-chemical properties have been studied.

  8. Towards CO2 sequestration and applications of CO2 hydrates: the effects of tetrahydrofuran on the phase equilibria of CO2 hydrates

    International Nuclear Information System (INIS)

    Khalik, M.S.; Peters, C.J.

    2006-01-01

    The increasing quantity of carbon dioxide (CO 2 ) in the atmosphere has caused widespread global concerns. Capturing CO 2 from its sources and stored it in the form of gas hydrates and application of CO 2 hydrates are among the proposed methods to overcome this problem. In order to make hydrate-based process more attractive, the use of cyclic ethers as promoters is suggested to reduce the required hydrate formation pressure and enhancing the corresponding kinetic rate. In the present work, tetrahydrofuran (THF) is chosen as a hydrate promoter, participating in forming hydrates and produces mixed hydrate together with CO 2 . The pressure and temperature ranges of hydrate stability region are carefully determined through phase equilibrium measurement of the ternary CO 2 , tetrahydrofuran (THF) and water systems. From the experimental results, it is confirmed that the presence of THF in CO 2 + water systems will extend the hydrate formation region to higher temperature at a constant pressure. The extension of the hydrate stability region is depended on the overall concentration of the ternary system. Moreover, four-phase equilibrium of H-Lw-Lv-V is observed in the system, which may be due to a liquid phase split. In the region where the four-phase equilibrium exists, the ternary system loses its concentration dependency of the hydrate equilibrium conditions. (Author)

  9. Spectrally narrowed emissions in 2,5-bis(4-biphenylyl)thiophene crystals pumped by fs laser pulse

    International Nuclear Information System (INIS)

    Kobayashi, S.; Sasaki, F.; Yanagi, H.; Hotta, S.; Ichikawa, M.; Taniguchi, Y.

    2005-01-01

    Spectrally narrowed emission (SNE) in 2,5-bis(4-biphenylyl)thiophene (BP1T) crystals is investigated using fs laser pulse. Two different types of narrowing are observed at different vibronic emission bands with increasing pump intensities. Based on their pump intensity dependence and illumination area dependence, we assign the SNE at 20,200 cm -1 (β-band) to amplified spontaneous emission (ASE) and the SNE at 21,600 cm -1 (α-band) to superfluorescence rather than ASE

  10. Polymers for organic photovoltaics based on 1,5-bis(2-hexyldecyloxy)-naphthalene, thiophene, and benzothiadiazole

    DEFF Research Database (Denmark)

    Carlé, Jon Eggert; Jørgensen, Mikkel; Krebs, Frederik C

    2011-01-01

    Two new conjugated polymers consisting of the donors 1,5-bis(2-hexyldecyloxy)naphthalene, thiophene, or bithiophene and the acceptor benzothiadiazole has been synthesized and their optical and photovoltaic properties have been characterized. The two polymers were compared with earlier synthesized...... and characterized polymers containing benzene instead of naphthalene. The two polymers absorb light in the visible spectrum (400 to 700 nm). The naphthalene containing polymers had blueshifted absorption spectra compared to the benzene containing polymers and also higher band gaps. In photovoltaic devices...

  11. The electrochemical polymerization of indole with thiophene

    International Nuclear Information System (INIS)

    Sarac, S.

    2004-01-01

    Electropolymerization of indole (IN) in the presence of thiophene (Th) was followed by in situ spectrochemical studies. A correlation between absorbance (390 nm) and charge (at 600 mV) values indicated that oligomeric species were formed in solution, and similar results were found with in situ measurements. The copolymer was characterized by FT-IR, UV-Visible Spectroscopy, Cyclic Voltammetry and four-point probe conductymeter. The increase in conductivity by the incorporation of Th into polyindole was about 60 times for a feed ratio n I N/n T H=1:10 and 19 times for n I N/n T H=1:1. Similar effects were also observed during in situ spectroelectrochemical measurements of copolymer formation. It was also found that the cyclic voltametry peak potentials for the electrogrowth of copolymer films were closely correlated to the conductivities of the corresponding films (measured separately by four-point probe method), thereby allowing us to use the peak potential currents to predict the final copolymer film conductivities during the electrochemical growth process. The ex-situ spectroelectrocopolymerization of indole was also obtained in acetonitril medium.The Tg value of the polymer also increased with the incorporation of Th. The results strongly suggest that IN and Th copolymerize on the electrode surface as well as in solution

  12. Adsorption of molecular additive onto lead halide perovskite surfaces: A computational study on Lewis base thiophene additive passivation

    Science.gov (United States)

    Zhang, Lei; Yu, Fengxi; Chen, Lihong; Li, Jingfa

    2018-06-01

    Organic additives, such as the Lewis base thiophene, have been successfully applied to passivate halide perovskite surfaces, improving the stability and properties of perovskite devices based on CH3NH3PbI3. Yet, the detailed nanostructure of the perovskite surface passivated by additives and the mechanisms of such passivation are not well understood. This study presents a nanoscopic view on the interfacial structure of an additive/perovskite interface, consisting of a Lewis base thiophene molecular additive and a lead halide perovskite surface substrate, providing insights on the mechanisms that molecular additives can passivate the halide perovskite surfaces and enhance the perovskite-based device performance. Molecular dynamics study on the interactions between water molecules and the perovskite surfaces passivated by the investigated additive reveal the effectiveness of employing the molecular additives to improve the stability of the halide perovskite materials. The additive/perovskite surface system is further probed via molecular engineering the perovskite surfaces. This study reveals the nanoscopic structure-property relationships of the halide perovskite surface passivated by molecular additives, which helps the fundamental understanding of the surface/interface engineering strategies for the development of halide perovskite based devices.

  13. Synthesis and Characterization of Some New Bis-Pyrazolyl-Thiazoles Incorporating the Thiophene Moiety as Potent Anti-Tumor Agents

    Directory of Open Access Journals (Sweden)

    Sobhi M. Gomha

    2016-09-01

    Full Text Available A new series of 1,4-bis(1-(5-(aryldiazenylthiazol-2-yl-5-(thiophen-2-yl-4,5-dihydro-1H-pyrazol-3-ylbenzenes 3a–i were synthesized via reaction of 5,5′-(1,4-phenylenebis(3-(thiophen-2-yl-4,5-dihydro-1H-pyrazole-1-carbothioamide (1 with hydrazonoyl halides 2a–i. In addition, reaction of 1 with ethyl chloroacetate afforded bis-thiazolone derivative 8 as the end product. Reaction of compound 8 with methyl glyoxalate gave bis-thiazolone derivative 10. The structures of the newly synthesized compounds were established on the basis of spectroscopic evidences and their alternative syntheses. All the synthesized compounds were evaluated for their anti-tumor activities against hepatocellular carcinoma (HepG2 cell lines, and the results revealed promising activities of compounds 3g, 5e, 3e, 10, 5f, 3i, and 3f with IC50 equal 1.37 ± 0.15, 1.41 ± 0.17, 1.62 ± 0.20, 1.86 ± 0.20, 1.93 ± 0.08, 2.03 ± 0.25, and 2.09 ± 0.19 μM, respectively.

  14. Four thiophene-pyridyl-amide-based Zn{sup II}/Cd{sup II} coordination polymers: Assembly, structures, photocatalytic properties and fluorescent recognition for Fe{sup 3+}

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Xiu-Li; Wu, Xiao-Mei; Liu, Guo-Cheng; Li, Qiao-Min; Lin, Hong-Yan; Wang, Xiang

    2017-05-15

    By tuning metal ions and combining with different dicarboxylates, four new semi-rigid thiophene-bis-pyridyl-bis-amide-based coordination polymers, namely, [Zn(3-bptpa)(1,3-BDC)]·DMA·2H{sub 2}O (1), [Zn(3-bptpa)(5-MIP)] (2), [Cd(3-bptpa)(1,3-BDC)]·2H{sub 2}O (3) and [Cd(3-bptpa)(5-MIP)]·4H{sub 2}O (4) (3-bptpa=N,N′-bis(pyridine-3-yl)thiophene-2,5-dicarboxamide, 1,3-H{sub 2}BDC=1,3-benzenedicarboxylic acid, 5-H{sub 2}MIP=5-methylisophthalic acid, DMA=N,N-dimethylacetamide), were solvothermally/hydrothermally synthesized and structurally characterized by single-crystal X-ray diffraction analyses, IR spectra, UV–vis diffuse-reflectance spectra (DRS), powder X-ray diffraction (PXRD) and thermal gravimetric analyses (TG). The structural analysis reveals that Zn-complexes 1 and 2 are similar 2D networks. While Cd-complexes 3 and 4 exhibit similar 2-fold interpenetrating 3D α-Po frameworks with the (4{sup 12}·6{sup 3}) topology. The photocatalytic properties for the degradation of methylene blue (MB) under ultraviolet light irradiation of the title complexes have been investigated in detail. Furthermore, the luminescent sensing behaviors for metal cations of 1–4 have been studied, the results indicate that 3 is an excellent fluorescent probe, with high sensitivity, selectivity, and simple regeneration, for environmentally relevant Fe{sup 3+} ions. - Graphical abstract: Four Zn{sup II}/Cd{sup II} coordination polymers with a thiophene-pyridyl-amide ligand have been prepared. The photocatalytic activities and fluorescent sensing properties for metal ions of the title complexes have been investigated. - Highlights: • Four coordination polymers with thiophene-pyridyl-amide ligands have been obtained. • The central metal ions play an important role in the formation of the frameworks. • The photoluminescent sensing and the photocatalytic properties have been investigated.

  15. Ferrocene-Functionalized 4-(2,5-Di(thiophen-2-yl-1H-pyrrol-1-ylaniline: A Novel Design in Conducting Polymer-Based Electrochemical Biosensors

    Directory of Open Access Journals (Sweden)

    Rukiye Ayranci

    2015-01-01

    Full Text Available Herein, we report a novel ferrocenyldithiophosphonate functional conducting polymer and its use as an immobilization matrix in amperometric biosensor applications. Initially, 4-(2,5-di(thiophen-2-yl-1H-pyrrol-1-ylamidoferrocenyldithiophosphonate was synthesized and copolymerized with 4-(2,5-di(thiophen-2-yl-1H-pyrrol-1-ylbenzenamine at graphite electrodes. The amino groups on the polymer were utilized for covalent attachment of the enzyme glucose oxidase. Besides, ferrocene on the backbone was used as a redox mediator during the electrochemical measurements. Prior to the analytical characterization, optimization studies were carried out. The changes in current signals at +0.45 V were proportional to glucose concentration from 0.5 to 5.0 mM. Finally, the resulting biosensor was applied for glucose analysis in real samples and the data were compared with the spectrophotometric Trinder method.

  16. Electronic Properties and Photovoltaic Performances of a Series of Oligothiophene Copolymers Incorporating Both Thieno[3,2-b]thiophene and 2,1,3-Benzothiadiazole Moieties.

    Science.gov (United States)

    Biniek, Laure; Chochos, Christos L; Hadziioannou, Georges; Leclerc, Nicolas; Lévêque, Patrick; Heiser, Thomas

    2010-04-06

    A series of donor-acceptor alternated conjugated copolymers, composed of thiophene, bithiophene, thieno[3,2-b]thiophene, and 2,1,3-benzothiadiazole units and differing from each other by the nature and the number of 3-alkylthiophene in the backbone, have been synthesized by Stille cross-coupling polymerization. The material's optical and electrochemical properties, in solution and in thin films, have been investigated using UV-Visible absorption and cyclic voltammetry. Bulk heterojunction solar cells using blends of the newly synthesized copolymers, as electron donor, and C60-PCBM or C70-PCBM, as electron transporting material, have been elaborated. A maximum power conversion efficiency of 1.8% is achieved with a 1:4 PPBzT(2) -C12:C70-PCBM weight ratio. Copyright © 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Singlet Fission via an Excimer-Like Intermediate in 3,6-Bis(thiophen-2-yl)diketopyrrolopyrrole Derivatives.

    Science.gov (United States)

    Mauck, Catherine M; Hartnett, Patrick E; Margulies, Eric A; Ma, Lin; Miller, Claire E; Schatz, George C; Marks, Tobin J; Wasielewski, Michael R

    2016-09-14

    Singlet fission (SF) in polycrystalline thin films of four 3,6-bis(thiophen-2-yl)diketopyrrolopyrrole (TDPP) chromophores with methyl (Me), n-hexyl (C6), triethylene glycol (TEG), and 2-ethylhexyl (EH) substituents at the 2,5-positions is found to involve an intermediate excimer-like state. The four different substituents yield four distinct intermolecular packing geometries, resulting in variable intermolecular charge transfer (CT) interactions in the solid. SF from the excimer state of Me, C6, TEG, and EH takes place in τSF = 22, 336, 195, and 1200 ps, respectively, to give triplet yields of 200%, 110%, 110%, and 70%, respectively. The transient spectra of the excimer-like state and its energetic proximity to the lowest excited singlet state in these derivatives suggests that this state may be the multiexciton (1)(T1T1) state that precedes formation of the uncorrelated triplet excitons. The excimer decay rates correlate well with the SF efficiencies and the degree of intermolecular donor-acceptor interactions resulting from π-stacking of the thiophene donor of one molecule with the DPP core acceptor in another molecule as observed in the crystal structures. Such interactions are found to also increase with the SF coupling energies, as calculated for each derivative. These structural and spectroscopic studies afford a better understanding of the electronic interactions that enhance SF in chromophores having strong intra- and intermolecular CT character.

  18. Isothermal (vapour + liquid) equilibrium for binary mixtures of (tetrahydrofuran + 1,1,2,2-tetrachloroethane or tetrachloroethene) at nine temperatures

    International Nuclear Information System (INIS)

    Garriga, R.; Perez, P.; Gracia, M.

    2006-01-01

    Vapour pressures of (tetrahydrofuran + 1,1,2,2-tetrachloroethane, or tetrachloroethene) at nine temperatures between T = 283.15 K and T = 323.15 K were measured by a static method. The reduction of the vapour pressures data to obtain activity coefficients and excess molar Gibbs energies was carried out by fitting the vapour pressure data to the Redlich-Kister polynomial according to Barker's method. Excess molar volumes were also measured at T 298.15 K. A comparative analysis about the thermodynamic behaviour of both systems is performed, in terms of hydrogen bonding and electron-donor-acceptor interactions, as well as the resonance effect in tetrachloroethene

  19. Thiophene-free diphenyl-amino-stilbene-diketo-pyrrolo-pyrrole derivatives as donors for organic bulk heterojunction solar cell

    Czech Academy of Sciences Publication Activity Database

    Honová, J.; Luňák, S.; Vala, M.; Stříteský, S.; Fekete, Ladislav; Weiter, M.; Kovalenko, A.

    2016-01-01

    Roč. 70, č. 10 (2016), s. 1416-1424 ISSN 0366-6352 R&D Projects: GA MŠk LO1409; GA ČR(CZ) GA15-05095S; GA MŠk LM2015088 Institutional support: RVO:68378271 Keywords : organic solar cell * thiophene-free * diphenyl-amino-stilbene * hole mobility * molecular structure Subject RIV: BM - Solid Matter Physics ; Magnetism OBOR OECD: Condensed matter physics (including formerly solid state physics, supercond.) Impact factor: 1.258, year: 2016

  20. Thiophene hydrodesulfurization over CoMo/Al2O3-CuY catalysts: Temperature effect study

    OpenAIRE

    Boukoberine, Yamina; Hamada, Boudjema

    2016-01-01

    CoMo/γ-Al2O3-CuY catalysts are prepared by physically mixing CoMo/γ-Al2O3 catalyst with Cu-exchanged Y zeolite. The CuY zeolite is prepared by the solid state ion exchange technique. The thiophene hydrodesulfurization is performed in a fixed bed reactor at high temperature and atmospheric pressure. The results show that the presence of CuY zeolite particles in CoMo/Al2O3 catalyst can have a noticeable effect on both the conversion and product selectivities. An increasing zeolite loading in ca...

  1. X-ray diffraction studies of the structure and orientations of thiophene and fluorenone based molecule

    International Nuclear Information System (INIS)

    Porzio, William; Pasini, Mariacecilia; Destri, Silvia; Giovanella, Umberto; Fontaine, Philippe

    2006-01-01

    The crystal structure of a conjugated molecule containing thiophene and fluorenone residues has been determined from powder X-ray diffraction (XRD). Thin films ( -5 Pa) onto oxidized silicon substrates, are oriented along with different crystallographic directions. A comparison of XRD in both Grazing Incidence and Bragg-Brentano geometries allowed to perform a quantitative analysis of the various orientations. This approach is generally applicable in the case of multi-oriented films. The results fully account for the poor performance of this molecule in p-type field effect transistor devices

  2. Complexes of cobalt(II), nickel(II), copper(II), zinc(II), cadmium(II) and dioxouranium(II) with thiophene-2-aldehydethiosemicarbazone

    International Nuclear Information System (INIS)

    Singh, Balwan; Misra, Harihar

    1986-01-01

    Metal complexes of thiosemicarbazides have been known for their pharmacological applications. Significant antitubercular, fungicidal and antiviral activities have been reported for thiosemicarbazides and their derivatives. The present study describes the systhesis and characterisation of complexes of Co II , Cu II , Zn II ,Cd II and UO II with thiosemicarbazone obtained by condensing thiophene-2-aldehyde with thiosemicarbazide. 17 refs., 2 tables. (author)

  3. Novel synthesis and antitumor evaluation of polyfunctionally substituted heterocyclic compounds derived from 2-cyano-N-(3-cyano-4,5,6,7-tetrahydrobenzo[b]thiophen-2-yl)-acetamide.

    Science.gov (United States)

    Shams, Hoda Z; Mohareb, Rafat M; Helal, Maher H; Mahmoud, Amira E

    2010-12-27

    The reaction of 2-amino-3-cyano-4,5,6,7-tetrahydrobenzo[b]thiophene with ethyl cyanoacetate gave 2-cyano-N-(3-cyano-4,5,6,7-tetrahydrobenzo[b]thiophen-2-yl)-acetamide. The latter was used to synthesize different heterocyclic derivatives comprising thiophene, thiazole, pyrazole, pyridine, pyrimidine, and coumarin rings. The mechanistic and synthetic pathways depended on regioselective attack and/or cyclization by the cyanoacetamido moiety in the key precursor on various chemical reagents. The competition of the reaction pathways including dipolar cyclization, dinucleophilic-bielectrophilic attack, β-attack, Gewald-type attack, and condensation reactions led to the diversity of the synthesized products. The antitumor activities of the synthesized products were studied and evaluated. Most of the compounds revealed high inhibitory effects when screened in vitro for their antiproliferative activity. Three human cancer cell lines, namely, breast adenocarcinoma (MCF-7), non-small cell lung cancer (NCI-H460) and CNS cancer (SF-268) were used in the screening tests. The simplicity of the synthetic procedures which mainly involved one-pot reactions under mild reaction conditions, the convenience of yield production and the diversity of the reactive sites in the produced systems play a valuable role for further heterocyclic transformations and further biological investigations.

  4. To the issue of temperature-dependent behavior of standard molar volumes of components in the binary system (water + tetrahydrofuran) at ambient pressure

    International Nuclear Information System (INIS)

    Ivanov, Evgeniy V.

    2014-01-01

    Graphical abstract: The standard molar volume of tetrahydrofuran (THF) in water, V THF ∘ (■), is a close-to-linear function of temperature and becomes increasingly appreciable with rising of the latter. Herewith the molar volume of pure THF, V THF (□), is retained to be larger, as compared to V THF ∘ , over all the temperature range studied. - Highlights: • Densities of aqueous THF at nine temperatures from (278.15 to 318.15) K were measured. • Temperature-dependent standard molar volumes of THF in water were calculated. • The analysis of excess standard molar volumes in the (water + THF) system was made. • The use of Redlich–Kister equation to obtain standard molar volumes is discussed. - Abstract: This report presents a comparative analysis of temperature-dependent data on density of both dilute aqueous solutions of tetrahydrofuran (THF) and dilute solutions of water in THF, as well as standard molar volumes of water or THF as a solute. For this purpose, new results on studying the volume-related properties of THF in a water-rich region at temperatures from (278.15 to 318.15) K, with a step of 5 K, and at the ambient pressure have been derived densimetrically. In discussion, some comments on previously published investigations, being related to temperature-dependent changes in the solution density and standard molar volumes of components of the system (water + THF), have been made

  5. Ferrocene-functionalized 4-(2,5-Di(thiophen-2-yl)-1H-pyrrol-1-yl)aniline: a novel design in conducting polymer-based electrochemical biosensors.

    Science.gov (United States)

    Ayranci, Rukiye; Demirkol, Dilek Odaci; Ak, Metin; Timur, Suna

    2015-01-13

    Herein, we report a novel ferrocenyldithiophosphonate functional conducting polymer and its use as an immobilization matrix in amperometric biosensor applications. Initially, 4-(2,5-di(thiophen-2-yl)-1H-pyrrol-1-yl)amidoferrocenyldithiophosphonate was synthesized and copolymerized with 4-(2,5-di(thiophen-2-yl)-1H-pyrrol-1-yl)benzenamine at graphite electrodes. The amino groups on the polymer were utilized for covalent attachment of the enzyme glucose oxidase. Besides, ferrocene on the backbone was used as a redox mediator during the electrochemical measurements. Prior to the analytical characterization, optimization studies were carried out. The changes in current signals at +0.45 V were proportional to glucose concentration from 0.5 to 5.0 mM. Finally, the resulting biosensor was applied for glucose analysis in real samples and the data were compared with the spectrophotometric Trinder method.

  6. Microbial biosafety of pilot-scale bioreactor treating MTBE and TBA-contaminated drinking water supply.

    Science.gov (United States)

    Schmidt, Radomir; Klemme, David A; Scow, Kate; Hristova, Krassimira

    2012-03-30

    A pilot-scale sand-based fluidized bed bioreactor (FBBR) was utilized to treat both methyl tert-butyl ether (MTBE) and tert-butyl alcohol (TBA) from a contaminated aquifer. To evaluate the potential for re-use of the treated water, we tested for a panel of water quality indicator microorganisms and potential waterborne pathogens including total coliforms, Escherichia coli, Salmonella and Shigella spp., Campylobacter jejuni, Aeromonas hydrophila, Legionella pneumophila, Vibrio cholerae, Yersinia enterocolytica and Mycobacterium avium in both influent and treated waters from the bioreactor. Total bacteria decreased during FBBR treatment. E. coli, Salmonella and Shigella spp., C. jejuni, V. cholerae, Y. enterocolytica and M. avium were not detected in aquifer water or bioreactor treated water samples. For those pathogens detected, including total coliforms, L. pneumophila and A. hydrophila, numbers were usually lower in treated water than influent samples, suggesting removal during treatment. The detection of particular bacterial species reflected their presence or absence in the influent waters. Copyright © 2012 Elsevier B.V. All rights reserved.

  7. Activity coefficients at infinite dilution measurements for organic solutes and water in the ionic liquid 4-methyl-N-butyl-pyridinium bis(trifluoromethylsulfonyl)-imide

    Energy Technology Data Exchange (ETDEWEB)

    Domanska, Urszula [Physical Chemistry Department, Faculty of Chemistry, Warsaw University of Technology, Noakowskiego 3, 00-664 Warsaw (Poland)], E-mail: ula@ch.pw.edu.pl; Marciniak, Andrzej [Physical Chemistry Department, Faculty of Chemistry, Warsaw University of Technology, Noakowskiego 3, 00-664 Warsaw (Poland)

    2009-12-15

    The activity coefficients at infinite dilution, {gamma}{sub 13}{sup {infinity}} for 36 solutes: alkanes, cycloalkanes, alkenes, alkynes, aromatic hydrocarbons, alcohols, thiophene, tetrahydrofuran, ethers, acetone, and water in the ionic liquid 4-methyl-N-butyl-pyridinium bis(trifluoromethylsulfonyl)-imide [bmPY][NTf{sub 2}] were determined by gas-liquid chromatography at temperatures from 298.15 K to 368.15 K. The partial molar excess enthalpies at infinite dilution values {delta}H{sub 1}{sup E,{infinity}} were calculated from the experimental {gamma}{sub 13}{sup {infinity}} values obtained over the temperature range. The selectivity for different separation problems were calculated from the {gamma}{sub 13}{sup {infinity}} and compared to the literature values for other ionic liquids, N-methyl-2-pyrrolidinone (NMP) and sulfolane.

  8. Crystal structure of diethyl 2-amino-6-[(thiophen-3-ylethynyl]azulene-1,3-dicarboxylate

    Directory of Open Access Journals (Sweden)

    Sebastian Förster

    2015-03-01

    Full Text Available The title compound, C22H19NO4S, has an almost planar geometry supported by intramolecular N—H...O and C—H...O hydrogen bonds. The thiophene ring is inclined to the azulene ring by 4.85 (16°, while the ethoxycarbonyl groups are inclined to the azulene ring by 7.0 (2 and 5.7 (2°. In the crystal, molecules are linked by pairs of N—H...O hydrogen bonds, forming inversion dimers with an R22(12 ring motif. The dimers are linked via C—H...π interactions, forming sheets parallel to (10-1.

  9. Atmospheric pressure chemical ionization Fourier transform ion cyclotron resonance mass spectrometry for complex thiophenic mixture analysis

    KAUST Repository

    Hourani, Nadim

    2013-10-01

    Rationale Polycyclic aromatic sulfur heterocycles (PASHs) are detrimental species for refining processes in petroleum industry. Current mass spectrometric Methods that determine their composition are often preceded by derivatization and dopant addition approaches. Different ionization Methods have different impact on the molecular assignment of complex PASHs. The analysis of such species under atmospheric pressure chemical ionization (APCI) is still considered limited due to uncontrolled ion generation with low- and high-mass PASHs. Methods The ionization behavior of a model mixture of five selected PASH standards was investigated using an APCI source with nitrogen as the reagent gas. A complex thiophenic fraction was separated from a vacuum gas oil (VGO) and injected using the same method. The samples were analyzed using Fourier transform ion cyclotron resonance mass spectrometry (FTICR MS). RESULTS PASH model analytes were successfully ionized and mainly [M + H]+ ions were produced. The same ionization pattern was observed for the real thiophenic sample. It was found that S1 class species were the major sulfur-containing species found in the VGO sample. These species indicated the presence of alkylated benzothiophenic (BT), dibenzothiophenic (DBT) and benzonaphthothiophenic (BNT) series that were detected by APCI-FTICR MS. CONCLUSIONS This study provides an established APCI-FTICR MS method for the analysis of complex PASHs. PASHs were detected without using any derivatization and without fragmentation. The method can be used for the analysis of S-containing crude oil samples. © 2013 John Wiley & Sons, Ltd.

  10. Furan- and Thiophene-2-Carbonyl Amino Acid Derivatives Activate Hypoxia-Inducible Factor via Inhibition of Factor Inhibiting Hypoxia-Inducible Factor-1

    Directory of Open Access Journals (Sweden)

    Shin-ichi Kawaguchi

    2018-04-01

    Full Text Available Induction of a series of anti-hypoxic proteins protects cells during exposure to hypoxic conditions. Hypoxia-inducible factor-α (HIF-α is a major transcription factor that orchestrates this protective effect. To activate HIF exogenously, without exposing cells to hypoxic conditions, many small-molecule inhibitors targeting prolyl hydroxylase domain-containing protein have been developed. In addition, suppression of factor inhibiting HIF-1 (FIH-1 has also been shown to have the potential to activate HIF-α. However, few small-molecule inhibitors of FIH-1 have been developed. In this study, we synthesized a series of furan- and thiophene-2-carbonyl amino acid derivatives having the potential to inhibit FIH-1. The inhibitory activities of these compounds were evaluated in SK-N-BE(2c cells by measuring HIF response element (HRE promoter activity. Several furan- and thiophene-2-carbonyl amino acid derivatives inhibited FIH-1 based on correlations among the docking score of the FIH-1 active site, the chemical structure of the compounds, and biological HIF-α/HRE transcriptional activity.

  11. Theoretical Study on Interactions between N-Butylpyridinium Nitrate and Thiophenic Compounds

    International Nuclear Information System (INIS)

    Lue, Renqing; Wang, Shutao; Lu, Yukun; Liu, Dong

    2013-01-01

    By using density functional theory calculations, we have performed a systemic study on the electronic structures and topological properties of interactions between N-butylpyridinium nitrate ([BPY] + [NO 3 ] - ) and thiophene (TS), benzothiophene (BT), dibenzothiophene (DBT), naphthalene (NAP). The most stable structure of [BPY] + [NO 3 ] - ion pair indicates that hydrogen bonding interactions between oxygen atoms on [NO 3 ] - anion and C2-H2 on pyridinium ring play a dominating role in the formation of ion pair. The occurrence of hydrogen bonding, π···H-C, and π···π interactions between [BPY] + [NO 3 ] - and TS, BT, DBT, NAP has been corroborated at the molecular level. But hydrogen bonding and π···π interactions between [BPY] + [NO 3 ] - and NAP are weak in terms of structural properties and NBO, AIM analyses. DBT is prior to adsorption on N-butylpyridinium nitrate ionic liquid

  12. Preparation of deuterated heterocyclic five-membered ring compounds (furan, thiophene, pyrrole, and derivatives) by base-catalyzed hydrogen isotope exchange with deuterium oxide

    International Nuclear Information System (INIS)

    Heinrich, K.H.; Herrmann, M.; Moebius, G.; Sprinz, H.

    1984-01-01

    Several deuterated heterocyclic compounds of the type of furan,thiophene and pyrrole were prepared by base-catalyzed proton exchange with deuterium oxide at temperatures above 423 K in a closed system. The determination of deuterium and its distribution within the molecules was carried out by mass spectrometry and 1 H nmr spectrometry. (author)

  13. Hydrate phase equilibrium and structure for (methane + ethane + tetrahydrofuran + water) system

    International Nuclear Information System (INIS)

    Sun Changyu; Chen Guangjin; Zhang Lingwei

    2010-01-01

    The separation of methane and ethane through forming hydrate is a possible choice in natural gas, oil processing, or ethylene producing. The hydrate formation conditions of five groups of (methane + ethane) binary gas mixtures in the presence of 0.06 mole fraction tetrahydrofuran (THF) in water were obtained at temperatures ranging from (277.7 to 288.2) K. In most cases, the presence of THF in water can lower the hydrate formation pressure of (methane + ethane) remarkably. However, when the composition of ethane is as high as 0.832, it is more difficult to form hydrate than without THF system. Phase equilibrium model for hydrates containing THF was developed based on a two-step hydrate formation mechanism. The structure of hydrates formed from (methane + ethane + THF + water) system was also determined by Raman spectroscopy. When THF concentration in initial aqueous solution was only 0.06 mole fraction, the coexistence of structure I hydrate dominated by ethane and structure II hydrate dominated by THF in the hydrate sample was clearly demonstrated by Raman spectroscopic data. On the contrary, only structure II hydrate existed in the hydrate sample formed from (methane + ethane + THF + water) system when THF concentration in initial aqueous solution was increased to 0.10 mole fraction. It indicated that higher THF concentration inhibited the formation of structure I hydrate dominated by ethane and therefore lowered the trapping of ethane in hydrate. It implies a very promising method to increase the separation efficiency of methane and ethane.

  14. [(4S,5S-2,2-Dimethyl-1,3-dioxolane-4,5-diyl]bis[N-(thiophen-2-ylmethylidenemethanamine

    Directory of Open Access Journals (Sweden)

    Yan Jiang

    2012-02-01

    Full Text Available In the title compound, C17H20N2O2S2, the five-membered heterocycle exhibits an envelope conformation and the molecular chirality and configuration are well preserved from l-tartaric acid. The dihedral angle between the two thiophene rings is 17.0 (2°. In the crystal, molecules are linked by C—H...O and C—H...S hydrogen interactions, which are effective in the stabilization of the crystal structure.

  15. Fused thiophene-based conjugated polymers and their use in optoelectronic devices

    Science.gov (United States)

    Facchetti, Antonio; Marks, Tobin J.; Takai, Atsuro; Seger, Mark; Chen; , Zhihua

    2017-07-18

    The present teachings relate to polymeric compounds and their use as organic semiconductors in organic and hybrid optical, optoelectronic, and/or electronic devices such as photovoltaic cells, light emitting diodes, light emitting transistors, and field effect transistors. The disclosed compounds generally include as repeating units at least one annulated thienyl-vinylene-thienyl (TVT) unit and at least one other pi-conjugated unit. The annulated TVT unit can be represented by the formula: ##STR00001## where Cy.sup.1 and Cy.sup.2 can be a five- or six-membered carbocyclic ring. The annulated TVT unit can be optionally substituted at any available ring atom(s), and can be covalently linked to the other pi-conjugated unit via either the thiophene rings or the carbocyclic rings Cy.sup.1 and Cy.sup.2. The other pi-conjugated unit can be a conjugated linear linker including one or more unsaturated bonds, or a conjugated cyclic linker including one or more carbocyclic and/or heterocyclic rings.

  16. W-containing oxide layers obtained on aluminum and titanium by PEO as catalysts in thiophene oxidation

    Science.gov (United States)

    Rudnev, V. S.; Lukiyanchuk, I. V.; Vasilyeva, M. S.; Morozova, V. P.; Zelikman, V. M.; Tarkhanova, I. G.

    2017-11-01

    W-containing oxide layers fabricated on titanium and aluminum alloys by Plasma electrolytic oxidation (PEO) have been tested in the reaction of the peroxide oxidation of thiophene. Samples with two types of coatings have been investigated. Coatings I contained tungsten oxide in the matrix and on the surface of amorphous silica-titania or silica-alumina layers, while coatings II comprised crystalline WO3 and/or Al2(WO4)3. Aluminum-supported catalyst containing a smallest amount of transition metals in the form of tungsten oxides and manganese oxides in low oxidation levels showed high activity and stability.

  17. Hydrogen Storage Capacity of Tetrahydrofuran and Tetra-N-Butylammonium Bromide Hydrates Under Favorable Thermodynamic Conditions

    Directory of Open Access Journals (Sweden)

    Joshua T. Weissman

    2017-08-01

    Full Text Available An experimental study was conducted to evaluate the feasibility of employing binary hydrates as a medium for H2 storage. Two reagents, tetrahydrofuran (THF and tetra-n-butylammonium bromide (TBAB, which had been reported previously to have potential to form binary hydrates with H2 under favorable conditions (i.e., low pressures and high temperatures, were investigated using differential scanning calorimetry and Raman spectroscopy. A scale-up facility was employed to quantify the hydrogen storage capacity of THF binary hydrate. Gas chromatography (GC and pressure drop analyses indicated that the weight percentages of H2 in hydrate were less than 0.1%. The major conclusions of this investigation were: (1 H2 can be stored in binary hydrates at relatively modest pressures and temperatures which are probably feasible for transportation applications; and (2 the storage capacity of H2 in binary hydrate formed from aqueous solutions of THF over a concentration range extending from 2.78 to 8.34 mol % and at temperatures above 263 K and pressures below 11 MPa was <0.1 wt %.

  18. Synthesis, characterization, and photophysical properties of a thiophene-functionalized bis(pyrazolyl) pyridine (BPP) tricarbonyl rhenium(I) complex.

    Science.gov (United States)

    Lytwak, Lauren A; Stanley, Julie M; Mejía, Michelle L; Holliday, Bradley J

    2010-09-07

    A bromo tricarbonyl rhenium(I) complex with a thiophene-functionalized bis(pyrazolyl) pyridine ligand (L), ReBr(L)(CO)(3) (1), has been synthesized and characterized by variable temperature and COSY 2-D (1)H NMR spectroscopy, single-crystal X-ray diffraction, and photophysical methods. Complex 1 is highly luminescent in both solution and solid-state, consistent with phosphorescence from an emissive (3)MLCT excited state with an additional contribution from a LC (3)(pi-->pi*) transition. The single-crystal X-ray diffraction structure of the title ligand is also reported.

  19. Steady State and Time-Resolved Fluorescence Dynamics of Triphenylamine Based Oligomers with Phenylene/Thiophene/Furan in Solvents

    International Nuclear Information System (INIS)

    Qi, Zeng; Ying-Liang, Liu; Kang, Meng; Xiang-Jie, Zhao; Shu-Feng, Wang; Qi-Huang, Gong

    2009-01-01

    We investigate the photo-physical properties of a series of triphenylamine-based oligomers by steady-state and picosecond transient fluorescence measurements in solvents. The oligomers are composed alternatively with triphenylamine and phenylene/thiophene/furan group, bridged by vinyl group (PNB/PNT/PNF). Their fluorescence spectra show bathochromic phenomenon with solvent polarity and viscosity increasing. The fluorescence decays are bi-exponential for PNB and PNT, and tri-exponential for PNF in THF and aniline. The strong viscosity dependence suggests conformational relaxation along the PNF chain after photo excitation. (condensed matter: electronicstructure, electrical, magnetic, and opticalproperties)

  20. 4,4′-[Thiophene-2,5-diylbis(ethyne-2,1-diyl]dibenzonitrile

    Directory of Open Access Journals (Sweden)

    Kari Rissanen

    2008-04-01

    Full Text Available In the solid state, the title compound, C22H10N2S, forms centrosymmetric dimers by pairs of non-classical C—H...S hydrogen bonds linking approximately coplanar molecules. The benzene ring involved in this interaction makes a dihedral angle of only 7.21 (16° with the thiophene ring, while the other benzene ring is twisted somewhat out of the plane, with a dihedral angle of 39.58 (9°. The hydrogen-bonded dimers stack on top of each other with an interplanar spacing of 3.44 Å. C—H...N hydrogen bonds link together stacks that run in approximately perpendicular directions. Each molecule thus interacts with 12 adjacent molecules, five of them approaching closer than the sum of the van der Waals radii for the relevant atoms. Optimization of the inter-stack contacts contributes to the non-planarity of the molecule.

  1. Polyelectrolyte Complexes of a Cationic All Conjugated Fluorene Thiophene Diblock Copolymer with Aqueous DNA

    DEFF Research Database (Denmark)

    Knaapila, Matti; Costa, Telma; Garamus, Vasil M.

    2015-01-01

    TMAHT repeat units; x = 0.5 equals the nominal charge neutralization. PF2/6-P3TMAHT forms 20–40 nm sized particles with PF2/6 core and hydrated P3TMAHT exterior. The polymer particles form loose one-dimensional chains giving micrometer long branched chains (0.19 ≤ x ≤ 0.76) and subsequently randomly......We report on the structural and colorimetric effects of interaction of aqueous ∼0.06–1% poly[9,9-bis(2-ethylhexyl)fluorene]-b-poly[3-6-trimethylammoniumhexyl)thiophene] bromide (PF2/6-P3TMAHT) with double-stranded DNA to form PF2/6-P3TMAHT(DNA)x where x is the molar ratio of DNA base pairs to P3...

  2. Microneedle crystals of cyano-substituted thiophene/phenylene co-oligomer epitaxially grown on KCl surface

    Science.gov (United States)

    Torii, Kazuki; Dokiya, Shohei; Tanaka, Yosuke; Yoshinaga, Shohei; Yanagi, Hisao

    2017-06-01

    A cyno-substituted thiophene/phenylene co-oligomer (TPCO), 5,5‧-bis(4‧-cyanobiphenyl-4-yl)-2,2‧-bithiophene (BP2T-CN), is vapor-deposited on KCl (001) surface kept at 220 °C by the mask-shadowing method. Transmission electron microscopy and fluorescence microscopy reveal that the deposited BP2T-CN crystallizes in two types of morphologies: microneedles and thin film crystallites. In particular, the predominant microneedles epitaxially grow in four directions in the manner that the BP2T-CN molecules align along the [110]KCl or [-110]KCl. X-ray diffraction patterns indicate that the BP2T-CN molecules in the microneedle lie parallel while those in the thin film crystallite obliquely stand on the KCl surface.

  3. Thiophene fused azacoronenes: regioselective synthesis, self organization, charge transport, and its incorporation in conjugated polymers

    Science.gov (United States)

    Liu, Yi; He, Bo

    2015-09-15

    A regioselective synthesis of an azacoronene fused with two peripheral thiophene groups has been realized through a concise synthetic route. The resulting thienoazacoronene (TAC) derivatives show high degree of self-organization in solution, in single crystals, in the bulk, and in spuncast thin films. Spuncast thin film field-effect transistors of the TACs exhibited mobilities up to 0.028 cm.sup.2V.sup.-1 S.sup.-1, which is among the top field effect mobilities for solution processed discotic materials. Organic photovoltaic devices using TAC-containing conjugated polymers as the donor material exhibited a high open-circuit voltage of 0.89 V, which was ascribable to TAC's low-lying highest occupied molecular orbital energy level.

  4. Materials for n-type organic electronics: synthesis and properties of fluoroarene-thiophene semiconductors

    Science.gov (United States)

    Facchetti, Antonio; Yoon, Myung-Han; Katz, Howard E.; Marks, Tobin J.

    2003-11-01

    Recent progress in the field of organic electronics is due to a fruitful combination of both innovative molecular design and promising low-cost material/device assembly. Targeting the first strategy, we present here the general synthesis of fluoroarene-containing thiophene-based semiconductors and the study of their properties with respect to the corresponding fluorine-free hole-transporting analogues. The new compounds have been characterized by elemental analysis, mass spectrometry, and 1H- and 19F NMR. The dramatic influence of fluorine substitution and molecular architecture has been investigated by solution/film optical absorption, fluorescence emission, and cyclic voltammetry. Single crystal data for all of the oligomers have been obtained and will be presented. Film microstructure and morphology of this new class of materials have been studied by XRD and SEM. Particular emphasis will be posed on the solution-processable oligomers and polymers.

  5. Structure and photoconductivity in synthesized poly thiophene by plasma; Estructura y fotoconductividad en politiofeno sintetizado por plasma

    Energy Technology Data Exchange (ETDEWEB)

    Enriquez, M.A.; Colin, E.; Cruz, G.J.; Olayo, M.G.; Ordonez, E. [ININ, A.P. 18-1027, Mexico, D.F. (Mexico); Morales, J.; Olayo, R. [UAM-I, A.P. 55-534 Mexico D.F. (Mexico); Romero, M. [UAM-A, DEP, 02200 Mexico D.F. (Mexico)]. e-mail: angelenrimx@hotmail.com

    2006-07-01

    his work the electric answer of poly thiophene is studied (PTh) to pulses of light to evaluate its luminescence potential. The synthesis of the polymers is made by plasma with different energy to study its effects on the structure of the material. The electric conductivity was calculated by means of the resistance of the polymers in a parallel arrangement of badges between 10 to 250 V, stimulated with ultraviolet light (250 nm) to promote the transfer of electric loads to different temperatures. The results indicate that the aromatic structure of the PTh depends on the power applied during the synthesis. (Author)

  6. The MTBE-plant at Kaarstoe, Norway. Consequences for industry and commerce, labour market and local government finance

    International Nuclear Information System (INIS)

    Stokka, A.; Nilssen, I.

    1995-05-01

    The paper discusses some of the results of a consequence analysis of the establishment of a MTBE-plant at Kaarstoe, Norway. The supplies from local subcontractors to the construction and operation of the plant are likely to be of the same extent as for previous constructions, but the supplies from the Norwegian industry will probably be less because of limited experience with petrochemistry. A high investment level offshore may lead to a shortage of some categories of Norwegian and local personnel during the construction. The number of people directly employed at the construction site plus the number of those throughout the Haugesund area who work for the plant may amount to 800-900 in 1994. During operation, the plant will employ 140-150 local people. For the local governments the plant implies considerable tax revenues: property tax, personal tax and corporation tax. 10 refs., 7 figs., 16 tabs

  7. Functional and toxicological consequences of metabolic bioactivation of methapyrilene via thiophene S-oxidation: Induction of cell defence, apoptosis and hepatic necrosis

    International Nuclear Information System (INIS)

    Mercer, Amy E.; Regan, Sophie L.; Hirst, Charlotte M.; Graham, Emma E.; Antoine, Daniel J.; Benson, Craig A.; Williams, Dominic P.; Foster, John; Kenna, J. Gerry; Park, B. Kevin

    2009-01-01

    Methapyrilene, [N,N-dimethyl-N'-pyridyl-N'(2-thienylmethyl)-1,2-ethanediamine] (MP) was withdrawn from, clinical use due to reported periportal hepatic necrosis and hepatocarcinogenicity in the rat, via S-oxidation of the thiophene group. In this study MP is used as a model hepatotoxin to further characterise the functional consequences of S-oxidation of the thiophene group in vivo, in rat models and in vitro, in freshly isolated rat hepatocyte suspensions. In vivo histological studies revealed the early depletion of glutathione (GSH), which was confined to the damaged periportal area, in contrast to an increase in GSH levels in the centrilobular region. Additionally, the induction of cell defence was demonstrated by an increase in the protein levels of heme-oxygenase 1 (HO-1) and glutamate cysteine ligase, catalytic subunit (GCLC) in vivo. Histological examination demonstrated that cytotoxicity progresses initially via apoptosis before an increase in necrosis over the 3-day administration. An apoptotic-like mechanism was observed in vitro via the measurement of cytochrome c release and caspase activation. Conclusion: This study provides evidence for a complex pathway of MP-induced hepatotoxicity which progresses through early adaptation, apoptosis, necrosis and inflammation, all underpinned by the zonal induction and depletion of GSH within the liver.

  8. Effects of aromatics, MTBE, olefins, and T90 on urban air quality year 2005/2010

    International Nuclear Information System (INIS)

    Dunker, A.M.; Morris, R.D.; Pollack, A.K.; Cohen, J.P.; Schleyer, C.H.

    1992-01-01

    Subject to the limitations described in the Discussion, changing fuel composition changes the light-duty vehicle contribution to ozone. By the year 2005/2010, light-duty vehicles will contribute only 5 to 9% of the peak ozone in the three cities studied, because large reductions in automotive emissions are projected due to regulations now in place. For the reformulated gasolines studied, the contribution of light-duty vehicles to peak ozone can be reduced up to 26%. Reducing gasoline olefin content reduces ozone formation, due to its impact on evaporative, running-loss, and refueling and storage emissions. Lowering gasoline boiling range also reduces ozone formation by lowering the reactivity of exhaust emissions. Reducing aromatic content or adding MTBE had no clear effect on ozone formation. The emissions inventories used in the air quality modeling contain significant uncertainties. In particular, recent studies have suggested that emissions models may significantly underestimate hydrocarbon and CO emissions from today's vehicle fleet. If this is the case, the predicted ozone reductions due to reformulated gasoline reported here may be underestimated

  9. Influence of Backbone Fluorination in Regioregular Poly(3-alkyl-4-fluoro)thiophenes

    KAUST Repository

    Fei, Zhuping

    2015-06-03

    © 2015 American Chemical Society. We report two strategies toward the synthesis of 3-alkyl-4-fluorothiophenes containing straight (hexyl and octyl) and branched (2-ethylhexyl) alkyl groups. We demonstrate that treatment of the dibrominated monomer with 1 equiv of alkyl Grignard reagent leads to the formation of a single regioisomer as a result of the pronounced directing effect of the fluorine group. Polymerization of the resulting species affords highly regioregular poly(3-alkyl-4-fluoro)thiophenes. Comparison of their properties to those of the analogous non-fluorinated polymers shows that backbone fluorination leads to an increase in the polymer ionization potential without a significant change in optical band gap. Fluorination also results in an enhanced tendency to aggregate in solution, which is ascribed to a more co-planar backbone on the basis of Raman and DFT calculations. Average charge carrier mobilities in field-effect transistors are found to increase by up to a factor of 5 for the fluorinated polymers.

  10. Operational electrochemical stability of thiophene-thiazole copolymers probed by resonant Raman spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Wade, Jessica; Wood, Sebastian; Kim, Ji-Seon, E-mail: ji-seon.kim@imperial.ac.uk [Department of Physics and Centre for Plastic Electronics, Imperial College London, London SW7 2AZ (United Kingdom); Beatrup, Daniel; Hurhangee, Michael; McCulloch, Iain; Durrant, James R. [Department of Chemistry and Centre for Plastic Electronics, Imperial College London, London SW7 2AY (United Kingdom); Bronstein, Hugo [Department of Chemistry and Centre for Plastic Electronics, Imperial College London, London SW7 2AY (United Kingdom); Department of Chemistry, University College London, London WC1H 0AJ (United Kingdom)

    2015-06-28

    We report on the electrochemical stability of hole polarons in three conjugated polymers probed by resonant Raman spectroscopy. The materials considered are all isostructural to poly(3-hexyl)thiophene, where thiazole units have been included to systematically deepen the energy level of the highest occupied molecular orbital (HOMO). We demonstrate that increasing the thiazole content planarizes the main conjugated backbone of the polymer and improves the electrochemical stability in the ground state. However, these more planar thiazole containing polymers are increasingly susceptible to electrochemical degradation in the polaronic excited state. We identify the degradation mechanism, which targets the C=N bond in the thiazole units and results in disruption of the main polymer backbone conjugation. The introduction of thiazole units to deepen the HOMO energy level and increase the conjugated backbone planarity can be beneficial for the performance of certain optoelectronic devices, but the reduced electrochemical stability of the hole polaron may compromise their operational stability.

  11. Gold and Nickel Extended Thiophenic-TTF Bisdithiolene Complexes

    Directory of Open Access Journals (Sweden)

    Rafaela A. L. Silva

    2018-02-01

    Full Text Available Gold and nickel bisdithiolene complexes with methyl and tert-butyl substituted thiophenetetrathiafulavalenedithiolate ligands (α-mtdt and α-tbtdt were prepared and characterized. These complexes were obtained, under anaerobic conditions, as tetrabutylammonium salts. The diamagnetic gold monoanion (n-Bu4N[Au(α-mtdt2] (3 and nickel dianionic species (n-Bu4Nx[Ni(α-mtdt2] (x = 1,2 (4 were similar to the related non-substituted extended thiophenic-TTF (TTF = tetrathiafulvalene bisdithiolenes. However the introduction of the large, bulky substituent tert-butyl, led to the formation of a Au (I dinuclear complex, (n-Bu4N2[Au2(α-tbtdt2] (5. The neutral methyl substituted gold and nickel complexes were easily obtained through air or iodine exposure as polycrystalline or amorphous fine powder. [Au(α-mtdt2] (6 and [Ni(α-mtdt2] (7 polycrystalline samples display properties of a metallic system with a room temperature electrical conductivity of 0.32 S/cm and ≈4 S/cm and a thermoelectric power of ≈5 µV/K and ≈32 µV/K, respectively. While [Au(α-mtdt2] (6 presented a Pauli-like magnetic susceptibility typical of conducting systems, in [Ni(α-mtdt2] (7 large magnetic susceptibilities indicative of high spin states were observed. Both electric transport properties and magnetic properties for gold and nickel [M(α-mtdt2] are indicative that these compounds are single component molecular conductors.

  12. Synthesis, Density Functional Theory (DFT), Urease Inhibition and Antimicrobial Activities of 5-Aryl Thiophenes Bearing Sulphonylacetamide Moieties.

    Science.gov (United States)

    Noreen, Mnaza; Rasool, Nasir; Gull, Yasmeen; Zubair, Muhammad; Mahmood, Tariq; Ayub, Khurshid; Nasim, Faiz-Ul-Hassan; Yaqoob, Asma; Zia-Ul-Haq, Muhammad; de Feo, Vincenzo

    2015-11-05

    A variety of novel 5-aryl thiophenes 4a-g containing sulphonylacetamide (sulfacetamide) groups were synthesized in appreciable yields via Pd[0] Suzuki cross coupling reactions. The structures of these newly synthesized compounds were determined using spectral data and elemental analysis. Density functional theory (DFT) studies were performed using the B3LYP/6-31G (d, p) basis set to gain insight into their structural properties. Frontier molecular orbital (FMOs) analysis of all compounds 4a-g was computed at the same level of theory to get an idea about their kinetic stability. The molecular electrostatic potential (MEP) mapping over the entire stabilized geometries of the molecules indicated the reactive sites. First hyperpolarizability analysis (nonlinear optical response) were simulated at the B3LYP/6-31G (d, p) level of theory as well. The compounds were further evaluated for their promising antibacterial and anti-urease activities. In this case, the antibacterial activities were estimated by the agar well diffusion method, whereas the anti-urease activities of these compounds were determined using the indophenol method by quantifying the evolved ammonia produced. The results revealed that all the sulfacetamide derivatives displayed antibacterial activity against Bacillus subtiles, Escherichia coli, Staphylococcus aureus, Shigella dysenteriae, Salmonella typhae, Pseudomonas aeruginosa at various concentrations. Furthermore, the compound 4g N-((5-(4-chlorophenyl)thiophen-2-yl)sulfonyl) acetamide showed excellent urease inhibition with percentage inhibition activity ~46.23 ± 0.11 at 15 µg/mL with IC50 17.1 µg/mL. Moreover, some other compounds 4a-f also exhibited very good inhibition against urease enzyme.

  13. Selective adsorption of thiophenic compounds from fuel over TiO2/SiO2 under UV-irradiation.

    Science.gov (United States)

    Miao, Guang; Ye, Feiyan; Wu, Luoming; Ren, Xiaoling; Xiao, Jing; Li, Zhong; Wang, Haihui

    2015-12-30

    This study investigates selective adsorption of thiophenic compounds from fuel over TiO2/SiO2 under UV-irradiation. The TiO2/SiO2 adsorbents were prepared and then characterized by N2 adsorption, X-ray diffraction and X-ray photoelectron spectroscopy. Adsorption isotherms, selectivity and kinetics of TiO2/SiO2 were measured in a UV built-in batch reactor. It was concluded that (a) with the employment of UV-irradiation, high organosulfur uptake of 5.12 mg/g was achieved on the optimized 0.3TiO2/0.7SiO2 adsorbent at low sulfur concentration of 15 ppmw-S, and its adsorption selectivity over naphthalene was up to 325.5; (b) highly dispersed TiO2 served as the photocatalytic sites for DBT oxidation, while SiO2 acted as the selective adsorption sites for the corresponding oxidized DBT using TiO2 as a promoter, the two types of active sites worked cooperatively to achieve the high adsorption selectivity of TiO2/SiO2; (c) The kinetic rate-determining step for the UV photocatalysis-assisted adsorptive desulfurization (PADS) over TiO2/SiO2 was DBT oxidation; (d) consecutive adsorption-regeneration cycles suggested that the 0.3TiO2/0.7SiO2 adsorbent can be regenerated by acetonitrile washing followed with oxidative air treatment. This work demonstrated an effective PADS approach to greatly enhance adsorption capacity and selectivity of thiophenic compounds at low concentrations for deep desulfurization under ambient conditions. Copyright © 2015 Elsevier B.V. All rights reserved.

  14. Oxadiazole-substituted naphtho[2,3-b]thiophene-4,9-diones as potent inhibitors of keratinocyte hyperproliferation. Structure-activity relationships of the tricyclic quinone skeleton and the oxadiazole substituent

    DEFF Research Database (Denmark)

    Basoglu, Atila; Dirkmann, Simone; Zahedi Golpayegani, Nader

    2017-01-01

    Novel analogues of oxadiazole-substituted naphtho[2,3-b]thiophene-4,9-diones were synthesized in which the tricyclic quinone skeleton was systematically replaced with simpler moieties, such as structures with fewer rings and open-chain forms, while the oxadiazole ring was maintained. In addition...

  15. 1,3-Dioxolane, tetrahydrofuran, acetylacetone and dimethyl sulfoxide as solvents for non-aqueous vanadium acetylacetonate redox-flow-batteries

    International Nuclear Information System (INIS)

    Herr, T.; Noack, J.; Fischer, P.; Tübke, J.

    2013-01-01

    Highlights: • Four solvents were employed in a non-aqueous redox flow battery system. • Coulombic efficiencies of 85.9–98.5% and energy efficiencies of 26.6–43.6% were achieved. • Discharge power density was enhanced up to 0.080 mW cm −2 . • Solubility of V(acac) 3 was increased to 0.8 M compared to the acetonitrile system. -- Abstract: A non-aqueous vanadium acetylacetonate redox flow battery with different organic solvents and tetrabutylammonium hexafluorophosphate has been investigated. Cyclic voltammograms show three redox couples in 1,3-dioxolane, tetrahydrofuran, acetylacetone and two redox couples in dimethyl sulfoxide. Cell potentials between 2.21 and 2.61 V are measured, depending on the solvent used. Impedance Spectroscopy has been used to determine rate limiting step in the non-aqueous redox flow battery. Experiments in a charge–discharge test cell yielded coulombic and energy efficiencies of 85.9–98.5% and 26.6–43.6%, respectively

  16. Diels-Alder reactions for the rational design of benzo[b]thiophenes: DFT-based guidelines for synthetic chemists

    Science.gov (United States)

    Brasca, Romina; Kneeteman, María N.; Mancini, Pedro M. E.; Fabian, Walter M. F.

    2012-02-01

    In this work we studied the capability of several diene/dienophile pairs to undergo Diels-Alder (DA) reactions leading to benzo[b]thiophenes. A variety of synthetically and commercially available nitrothiophenes were chosen as dienophiles. Methyl 5-nitro-3-thiophenecarboxylate was selected as a potential strong electrophilic candidate based on some DFT-based properties and the substitution pattern of the expected product. The mechanistic details concerning the participation of this dienophile in polar DA reactions were investigated through a theoretical point of view. The results were compared with the experimental outcomes. This methodology should allow synthetic chemists to analyze DA reactions in detail in a stage prior to the synthetic job.

  17. Synthesis of Novel Heterocyclic Compounds Incorporate 4,5,6,7-Tetrahydrobenzo[b]thiophene Together with Their Cytotoxic Evaluations.

    Science.gov (United States)

    Abdallah, Amira Elsayed Mahmoud; Mohareb, Rafat Milad; Khalil, Eid Metwally; Elshamy, Menna Alla Mohamed Abd Elaleem

    2017-01-01

    The 2-amino-3-cyano-4,5,6,7-tetrahydrobenzo[b]thiophene was the key starting compound used to synthesize new thiazole, pyrimidine, pyran, pyridine and thiazine derivatives. The cytotoxicity of the synthesized compounds was studied towards the three cancer cell lines namely MCF-7 (breast adenocarcinoma), NCI-H460 (non-small cell lung cancer) and SF-268 (central nervous system (CNS) cancer) in addition to the normal cell line (WI-38) using doxorubicin as the reference drug. The study showed that compounds 5, 9a, 15b, 17c, 18 and 21b were the most potent compounds.

  18. The quadrupoles and its formation constant in an electrolytic solution of lithium perchlorate in tetrahydrofuran plus formic acid, at 298.15 K

    International Nuclear Information System (INIS)

    Inocencio, A.A.; Almeida, E.T. de

    1985-01-01

    The condutance data for the electrolytic solutions of LiclO 4 in a mixture of tetrahydrofuran (THF) plus formic acid, indicate the existence of pairs, triple ions and quadrupoles. The association constantes K sub(a) and K sub(t) for the ion pairs and triple ions, respectively, have been included in a previous paper, where those experimental results have been published. Now, through an analysis accounting simultaneously for the pairs, triple ions and quadrupoles in the solution, the quadrupole formation constant K sub(q) has been calculated, together with K sub(a) and K sub(t). The activity coefficients have been obtained by means of the Debye-Huckel's theory, Stockes radii and solvation numbers have been estimated and the structure of the ionic aggregates discussed. (Author) [pt

  19. Implication of novel thiazolo-thiophene derivative (MCD-KV-10) for management of asthma.

    Science.gov (United States)

    Patil, Dhiraj; Dash, Ranjeet Prasad; Thakur, Sandeep Kumar; Pandya, Amit N; Venkatesh, P; Vasu, Kamala K; Nivsarkar, Manish

    2015-04-01

    Asthma is multifaceted disease where many targets contribute towards its development and progression. Among these, adenosine receptor subtypes play a major role. MCD-KV-10, a novel thiazolo-thiophene was designed and evaluated pre-clinically for its implication in management of asthma. This compound showed good affinity and selectivity towards A(2A)/A3 adenosine receptor (AR) subtypes. Furthermore, MCD-KV-10 was evaluated for in vitro lipoxygenase inhibition activity; in vivo mast cell stabilization potential and in vivo anti-asthmatic activity was done in ovalbumin-induced airway inflammation model in guinea pigs. The compound showed good (>57%) inhibition of lipoxygenase enzyme and also effectively protected mast cell degranulation (>63%). The compound showed good anti-asthmatic activity as inferred from the in vivo studies. These results indicate that MCD-KV-10 has an inhibitory effect on airway inflammation. Though, we have identified a potential candidate for management of asthma, further mechanistic studies are needed.

  20. Response Surface Methodology for Biodiesel Production Using Calcium Methoxide Catalyst Assisted with Tetrahydrofuran as Cosolvent

    Directory of Open Access Journals (Sweden)

    Nichaonn Chumuang

    2017-01-01

    Full Text Available The present study was performed to optimize a heterogeneous calcium methoxide (Ca(OCH32 catalyzed transesterification process assisted with tetrahydrofuran (THF as a cosolvent for biodiesel production from waste cooking oil. Response surface methodology (RSM with a 5-level-4-factor central composite design was applied to investigate the effect of experimental factors on the percentage of fatty acid methyl ester (FAME conversion. A quadratic model with an analysis of variance obtained from the RSM is suggested for the prediction of FAME conversion and reveals that 99.43% of the observed variation is explained by the model. The optimum conditions obtained from the RSM were 2.83 wt% of catalyst concentration, 11.6 : 1 methanol-to-oil molar ratio, 100.14 min of reaction time, and 8.65% v/v of THF in methanol concentration. Under these conditions, the properties of the produced biodiesel satisfied the standard requirement. THF as cosolvent successfully decreased the catalyst concentration, methanol-to-oil molar ratio, and reaction time when compared with biodiesel production without cosolvent. The results are encouraging for the application of Ca(OCH32 assisted with THF as a cosolvent for environmentally friendly and sustainable biodiesel production.

  1. N-{(Z-3-Oxo-3-[(E-(pyridin-2-ylmethyldiazenyl]-1-(thiophen-2-ylprop-1-en-2-yl}benzamide

    Directory of Open Access Journals (Sweden)

    Devinder K. Sharma

    2016-08-01

    Full Text Available In the title compound, C20H16N4O2S, the thiophene ring subtends dihedral angles of 58.6 (3 and 9.8 (3° with the benzamide and pyridine rings, respectively, whereas these two rings are inclined to one another by 59.3 (3°. There is an intramolecular C—H...π interaction present involving the pyridine and benzamide rings. In the crystal, molecules are linked by N—H...O hydrogen bonds, forming chains along the [010] direction. The chains are linked by C—H...S hydrogen bonds and C—H...π interactions, forming sheets parallel to the ab plane.

  2. Photovoltaic characterization of hybrid solar cells using surface modified TiO2 nanoparticles and poly(3-hexyl)thiophene

    International Nuclear Information System (INIS)

    Guenes, Serap; Marjanovic, Nenad; Nedeljkovic, Jovan M; Sariciftci, Niyazi Serdar

    2008-01-01

    We report on the photovoltaic performance of bulk heterojunction solar cells using novel nanoparticles of 6-palmitate ascorbic acid surface modified TiO 2 as an electron acceptor embedded into the donor poly(3-hexyl)thiophene (P3HT) matrix. Devices were fabricated by using P3HT with varying amounts of red TiO 2 nanoparticles (1:1, 1:2, 1:3 w-w ratio). The devices were characterized by measuring current-voltage characteristics under simulated AM 1.5 conditions. Incident photon to current efficiency (IPCE) was spectrally resolved. The nanoscale morphology of such organic/inorganic hybrid blends was also investigated using atomic force microscopy (AFM).

  3. Electrochromic properties of poly (1-(phenyl)-2,5-di(2-thienyl)-1H-pyrrole-co-3,4-ethylenedioxy thiophene) and its application in electrochromic devices

    Science.gov (United States)

    Tarkuc, S.; Sahmetlioglu, E.; Tanyeli, C.; Akhmedov, I. M.; Toppare, L.

    2008-06-01

    Electrochemical copolymerization of 1-(phenyl)-2,5-di(2-thienyl)-1H-pyrrole (PTP) with 3,4-ethylenedioxy thiophene (EDOT) was carried out in acetonitrile (AN)/NaClO4/LiClO4 (0.1 M) solvent-electrolyte couple via potentiodynamic electrolysis. Characterizations of the resulting copolymer were performed via cyclic voltammetry (CV), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and spectroelectrochemical analysis. Spectroelectrochemical analyses show that the copolymer of PTP with EDOT has an electronic band gap (due to π to π∗ transition) of 1.9 eV at 480 nm, with a claret red in the fully reduced form and a blue color in the fully oxidized form. Via kinetic studies, the optical contrast (ΔT %) was found to be 8% for P(PTP-co-EDOT). Results showed that the time required to reach 95% of the ultimate transmittance was 1.7 s for the copolymer. The P(PTP-co-EDOT) film was used to construct a dual type polymer electrochromic device (ECDs) with poly(3,4-ethylenedioxy thiophene) (PEDOT). Spectroelectrochemistry, electrochromic switching and open circuit memory of the device were investigated.

  4. Clarification of the volumetric properties of the (tetrahydrofuran + water) systems [J. Chem. Thermodyn. 41 (2009) 1382–1386]: Author’s statement

    International Nuclear Information System (INIS)

    Belandria, Veronica; Pimentel-Rodas, Alfredo; Mohammadi, Amir H.; Galicia-Luna, Luis A.; Richon, Dominique

    2013-01-01

    Highlights: ► New experimental density data are reported for the (THF + water) systems. ► A vibrating tube densimeter has been used to perform the measurements. ► A discussion is made on the reliability of the generated data and other questions raised in the literature. - Abstract: Although reliable and consistent volumetric data can be derived from density measurements, the greatest experimental difficulty and largest measurement errors often occur in the very dilute regions of concentration. Such data are of great interest in separation processes where a high degree of purity is required. In this communication, the densities of the (tetrahydrofuran + water) systems have been carefully investigated in dilute regions. A vibrating tube densimeter has been used to perform the measurements. A discussion is made on the reliability of the generated experimental data and the questions raised in the literature.

  5. Multiple C-H Bond Activations and Ring-Opening C-S Bond Cleavage of Thiophene by Dirhenium Carbonyl Complexes.

    Science.gov (United States)

    Adams, Richard D; Dhull, Poonam; Tedder, Jonathan D

    2018-06-14

    The reaction of Re 2 (CO) 8 (μ-C 6 H 5 )(μ-H) (1) with thiophene in CH 2 Cl 2 at 40 °C yielded the new compound Re 2 (CO) 8 (μ-η 2 -SC 4 H 3 )(μ-H) (2), which contains a bridging σ-π-coordinated thienyl ligand formed by the activation of the C-H bond at the 2 position of the thiophene. Compound 2 exhibits dynamical activity on the NMR time scale involving rearrangements of the bridging thienyl ligand. The reaction of compound 2 with a second 1 equiv of 1 at 45 °C yielded the doubly metalated product [Re 2 (CO) 8 (μ-H)] 2 (μ-η 2 -2,3-μ-η 2 -4,5-C 4 H 2 S) (3), formed by the activation of the C-H bond at the 5 position of the thienyl ligand in 2. Heating 3 in a hexane solvent to reflux transformed it into the ring-opened compound Re(CO) 4 [μ-η 5 -η 2 -SCC(H)C(H)C(H)][Re(CO) 3 ][Re 2 (CO) 8 (μ-H)] (4) by the loss of one CO ligand. Compound 4 contains a doubly metalated 1-thiapentadienyl ligand formed by the cleavage of one of the C-S bonds. When heated to reflux (125 °C) in an octane solvent in the presence of H 2 O, the new compound Re(CO) 4 [η 5 -μ-η 2 -SC(H)C(H)C(H)C(H)]Re(CO) 3 (5) was obtained by cleavage of the Re 2 (CO) 8 (μ-H) group from 4 with formation of the known coproduct [Re(CO) 3 (μ 3 -OH)] 4 . All new products were characterized by single-crystal X-ray diffraction analyses.

  6. (Liquid + liquid) equilibria of binary systems containing hyperbranched polymer Boltorn (registered) H2004 - Experimental study and modelling in terms of lattice-cluster theory

    International Nuclear Information System (INIS)

    Domanska, Urszula; Paduszynski, Kamil; Zolek-Tryznowska, Zuzanna

    2011-01-01

    (Liquid + liquid) phase equilibria (LLE) of binary mixtures containing hyperbranched polymer Boltorn (registered) H2004 and n-alkanes (n-hexane, n-heptane, n-octane, and n-decane) were studied over the temperature range from about (260 up to 360) K. The polymer is partially miscible with n-alkanes and the solubility decreases with an increase of the chain length of the solvent. Corresponding LLE phase diagrams including spinodal and binodal (liquid + liquid) coexistence curves were calculated in terms of the statistical mechanics - based on the lattice-cluster theory, based only on the upper critical solution temperature, and the polymer chain architecture. The results show semi-qualitative agreement of predicted and experimental equilibrium compositions and temperatures. Boltorn (registered) H2004 reveals complete miscibility in the liquid phase with alcohols (C 1 -C 8 ), aromatic hydrocarbons (benzene, toluene, and thiophene), and ethers (methyl tetra-butyl ether, ethyl tetra-butyl ether, and tetrahydrofurane).

  7. Electrochromic behavior of poly(3,5-bis(4-bromophenyl)dithieno[3,2-b;2',3'-d]thiophene)

    International Nuclear Information System (INIS)

    Osken, Ipek; Bildirir, Hakan; Ozturk, Turan

    2011-01-01

    Electropolymerization of 3,5-bis(4-bromophenyl)dithieno[3,2-b;2',3'-d]thiophene, having a mild electron-withdrawing bromine atom attached to the para position of the two phenyl groups of dithienothiophene, was performed, utilizing a potentiodynamic method. The resultant homopolymer was characterized by cyclic volyammetry, fourier transform infrared and ultraviolet-visible spectroscopy. Spectroelectrochemical and electrochromic properties were investigated and a device was constructed with polyethylenedioxythiophene to understand the characteristics in detail, which had the potential range of 0.0-2.0 V for operating the device between green and blue colors. It had a good optical contrast of 18% with a switching time of less than a second. Moreover, open circuit memory and stability of the device were investigated.

  8. Organic liquids-responsive β-cyclodextrin-functionalized graphene-based fluorescence probe: label-free selective detection of tetrahydrofuran.

    Science.gov (United States)

    Hu, Huawen; Xin, John H; Hu, Hong; Wang, Xiaowen; Lu, Xinkun

    2014-06-06

    In this study, a label-free graphene-based fluorescence probe used for detection of volatile organic liquids was fabricated by a simple, efficient and low-cost method. To fabricate the probe, a bio-based β-cyclodextrin (β-CD) was firstly grafted on reduced graphene surfaces effectively and uniformly, as evidenced by various characterization techniques such as Ultraviolet/Visible spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, scanning electron microscopy and transmission electron microscopy. The subsequent inclusion of Rhodamine B (RhB) into the inner cavities of the β-CD grafted on the graphene surfaces was achieved easily by a solution mixing method, which yielded the graphene-based fluorescent switch-on probe. In addition, the gradual and controllable quenching of RhB by Fluorescence Resonance Energy Transfer from RhB to graphene during the process of stepwise accommodation of the RhB molecules into the β-CD-functionalized graphene was investigated in depth. A wide range of organic solvents was examined using the as-fabricated fluorescence probe, which revealed the highest sensitivity to tetrahydrofuran with the detection limit of about 1.7 μg/mL. Some insight into the mechanism of the different responsive behaviors of the fluorescence sensor to the examined targets was also described.

  9. Organic Liquids-Responsive β-Cyclodextrin-Functionalized Graphene-Based Fluorescence Probe: Label-Free Selective Detection of Tetrahydrofuran

    Directory of Open Access Journals (Sweden)

    Huawen Hu

    2014-06-01

    Full Text Available In this study, a label-free graphene-based fluorescence probe used for detection of volatile organic liquids was fabricated by a simple, efficient and low-cost method. To fabricate the probe, a bio-based β-cyclodextrin (β-CD was firstly grafted on reduced graphene surfaces effectively and uniformly, as evidenced by various characterization techniques such as Ultraviolet/Visible spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, scanning electron microscopy and transmission electron microscopy. The subsequent inclusion of Rhodamine B (RhB into the inner cavities of the β-CD grafted on the graphene surfaces was achieved easily by a solution mixing method, which yielded the graphene-based fluorescent switch-on probe. In addition, the gradual and controllable quenching of RhB by Fluorescence Resonance Energy Transfer from RhB to graphene during the process of stepwise accommodation of the RhB molecules into the β-CD-functionalized graphene was investigated in depth. A wide range of organic solvents was examined using the as-fabricated fluorescence probe, which revealed the highest sensitivity to tetrahydrofuran with the detection limit of about 1.7 μg/mL. Some insight into the mechanism of the different responsive behaviors of the fluorescence sensor to the examined targets was also described.

  10. Photovoltaic characterization of hybrid solar cells using surface modified TiO{sub 2} nanoparticles and poly(3-hexyl)thiophene

    Energy Technology Data Exchange (ETDEWEB)

    Guenes, Serap [Yildiz Technical University, Faculty of Arts and Science, Department of Physics, Davutpasa Campus, 34220, Esenler, Istanbul (Turkey); Marjanovic, Nenad [Plastic electronic GmbH, Rappetsederweg 28, A-4040 Linz (Austria); Nedeljkovic, Jovan M [Vinca Institute of Nuclear Sciences, PO Box 522, 11001 Belgrade (Serbia); Sariciftci, Niyazi Serdar [Linz Institute for Organic Solar Cells (LIOS), Physical Chemistry, Johannes Kepler University Linz, Altenberger Strasse 69, A-4040, Linz (Austria)], E-mail: sgunes@yildiz.edu.tr

    2008-10-22

    We report on the photovoltaic performance of bulk heterojunction solar cells using novel nanoparticles of 6-palmitate ascorbic acid surface modified TiO{sub 2} as an electron acceptor embedded into the donor poly(3-hexyl)thiophene (P3HT) matrix. Devices were fabricated by using P3HT with varying amounts of red TiO{sub 2} nanoparticles (1:1, 1:2, 1:3 w-w ratio). The devices were characterized by measuring current-voltage characteristics under simulated AM 1.5 conditions. Incident photon to current efficiency (IPCE) was spectrally resolved. The nanoscale morphology of such organic/inorganic hybrid blends was also investigated using atomic force microscopy (AFM)

  11. Reflection and extinction of light by self-assembled monolayers of a quinque-thiophene derivative: A coherent scattering approach

    Energy Technology Data Exchange (ETDEWEB)

    Gholamrezaie, Fatemeh; Meskers, Stefan C. J., E-mail: s.c.j.meskers@tue.nl [Molecular Materials and Nanosystems and Institute of Complex Molecular Systems, Eindhoven University of Technology, P.O. Box 513, 5600 MB Eindhoven (Netherlands); Leeuw, Dago M. de [Max Planck Institute for Polymer Research, Ackermannweg 10, 55128 Mainz (Germany)

    2016-06-07

    Scattering matrix theory is used to describe resonant optical properties of molecular monolayers. Three types of coupling are included: exciton-exciton, exciton-photon, and exciton-phonon coupling. We use the K-matrix formalism, developed originally to describe neutron scattering spectra in nuclear physics to compute the scattering of polaritons by phonons. This perturbation approach takes into account the three couplings and allows one to go beyond molecular exciton theory without the need of introducing additional boundary conditions for the polariton. We demonstrate that reflection, absorption, and extinction of light by 2D self-assembled monolayers of molecules containing quinque-thiophene chromophoric groups can be calculated. The extracted coherence length of the Frenkel exciton is discussed.

  12. Tuning Fullerene Intercalation in a Poly (thiophene) derivative by Controlling the Polymer Degree of Self-Organisation

    Science.gov (United States)

    Paternò, G. M.; Skoda, M. W. A.; Dalgliesh, Robert; Cacialli, F.; Sakai, V. García

    2016-10-01

    Controlling the nanoscale arrangement in polymer-fullerene organic solar cells is of paramount importance to boost the performance of such promising class of photovoltaic diodes. In this work, we use a pseudo-bilayer system made of poly(2,5-bis(3-hexadecylthiophen-2-yl)thieno[3,2-b]thiophene (PBTTT) and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM), to acquire a more complete understanding of the diffusion and intercalation of the fullerene-derivative within the polymer layer. By exploiting morphological and structural characterisation techniques, we observe that if we increase the film solidification time the polymer develops a higher crystalline order, and, as a result, it does not allow fullerene molecules to intercalate between the polymer side-chains. Gaining insight into the detailed fullerene intercalation mechanism is important for the development of organic photovoltaic diodes (PVDs).

  13. Reduction of uranium(IV) and its mixtures with an olefin or an alkyne in tetrahydrofuran solutions by solvated electrons

    International Nuclear Information System (INIS)

    Koulkes-Pujo, A.M.; Le Marechal, J.F.; Le Motais, B.; Folcher, G.

    1985-01-01

    The reduction of UCl 4 and its mixtures with different olefins (stilbene, St, diphenylethylene, DPE, acenaphtylene, Ac or with diphenylacetylene (DPA) was studied by pulse radiolysis of tetrahydrofuran (THF) solutions. U(III) was formed by U(IV) reaction either with the solvated electrons created by THF radiolysis or with the transitory anions St - and DPA - . In the latter case, the reaction proceeds via a first step leading to [St-U(IV)] - or [DPA-U(IV)] - . In the case of DPE - the first species, [DPE-U(IV)] - , does not lead to U(III) but is destroyed by THF(H) + giving DPE(H). and U(IV). Ac - does not react with U(IV). A mechanistic scheme of this electron attachment is discussed as well as its implication in catalytic hydrogenation of olefins in LiAlH 4 -UCl 4 solutions. It is concluded that the catalytic effect observed is rather the result of a hydride transfer from a uranium transient compound to the alkenes. 22 references, 8 figures, 1 table

  14. Properties of LiBF[sub 4] and LiAsF[sub 6] solutions in mixtures of tetrahydrofuran and 2-methyltetrahydrofuran. Svojstva rastvorov LiBF[sub 4] i LiAsF[sub 6] v smesyakh tetragidrofurana i 2-metiltetragidrofurana

    Energy Technology Data Exchange (ETDEWEB)

    Plakhotnik, A V; Tovmash, N F; Mishustin, A I; Kokunov, Yu V [AN SSSR, Moscow (Russian Federation). Inst. Obshchej i Neorganicheskoj Khimii

    1993-01-01

    Solutions of lithium tetrafluoroborate and hexafluoroarsenate in mixtures of tetrahydrofuran and 2-methyltetrahydrofuran were studies by the methods of conductometry, densimetry, viscosimetry and measurement of spin-lattice relaxation rate on [sup 7]Li nuclei. Considerable ifluence of anion nature was ascertained. Assumptions are made on the presence of cooperative interaction involving formation of the structures from solvent molecules and salt ions.

  15. Methyl tert-butyl ether (MTBE) detected in abnormally high concentrations in postmortem blood and urine from two persons found dead inside a car containing a gasoline spill.

    Science.gov (United States)

    Karinen, Ritva; Vindenes, Vigdis; Morild, Inge; Johnsen, Lene; Le Nygaard, Ilah; Christophersen, Asbjørg S

    2013-09-01

    Two deep frozen persons, a female and a male, were found dead in a car. There had been an explosive fire inside the car which had extinguished itself. On the floor inside the car were large pools of liquid which smelled of gasoline. The autopsy findings and routine toxicological analyses could not explain the cause of death. Carboxyhemoglobin levels in the blood samples were gasoline as a fuel oxygenate. Gasoline poisoning is likely to be the cause of the death in these two cases, and MTBE can be a suitable marker of gasoline exposure, when other volatile components have vaporized. © 2013 American Academy of Forensic Sciences.

  16. Rh(II-mediated domino [4 + 1]-annulation of α-cyanothioacetamides using diazoesters: A new entry for the synthesis of multisubstituted thiophenes

    Directory of Open Access Journals (Sweden)

    Jury J. Medvedev

    2017-11-01

    Full Text Available A new approach towards the synthesis of multisubstituted thiophenes is elaborated based on Rh(II-catalyzed domino reactions of acyclic diazoesters with α-cyanothioacetamides. It provides a way for the preparation of 5-amino-3-(alkoxycarbonylaminothiophene-2-carboxylates, 2-(5-amino-2-methoxycarbonylthiophene-3-ylaminomalonates and (2-cyano-5-aminothiophene-3-ylcarbamates with the preparative yields of up to 67%. It was also shown that α-cyanothioacetamides easily interact with dirhodium carboxylates to give rather stable 2:1 complexes, resulting in an evident decrease in the efficiency of the catalytic process at moderate temperatures (20–30 °C.

  17. Growth mode transition of tetrahydrofuran clathrate hydrates in the guest/host concentration boundary layer.

    Science.gov (United States)

    Sabase, Yuichiro; Nagashima, Kazushige

    2009-11-19

    Clathrate hydrates are known to form a thin film along a guest/host boundary. We present here the first report of tetrahydrofuran (THF) clathrate hydrate formation in a THF/water concentration boundary layer. We found that the THF-water system also forms a hydrate film separating the guest/host phases. The lateral growth rate of the film increases as supercooling increases. The thickness of the film at the growth tip decreases as supercooling and the lateral growth rate increase. These tendencies are consistent with reports of experiments for other hydrates and predictions of heat-transfer models. After film formation and slight melting, two types of growth modes are observed, depending on temperature T. At T = 3.0 degrees C, the film slowly thickens. The thickening rate is much lower than the lateral growth rate, as reported for other hydrates. At T agglomerate of small polycrystalline hydrates forms in each phase. Grain boundaries in the film and pore spaces in the agglomerate act as paths for permeation of each liquid. Timing when continuous nucleation starts is dominantly controlled by the time of initiation of liquid permeation through the film. Digital particle image velocimetry analysis of the agglomerate shows that it expands not by growth at the advancing front but rather by continuous nucleation in the interior. Expansion rates of the agglomerate tend to be higher for the cases of multipermeation paths in the film and the thinner film. We suppose that the growth mode transition to continuous nucleation is caused by the memory effect due to slight melting of the hydrate film.

  18. Crystal structure of an unknown tetrahydrofuran solvate of tetrakis(μ3-cyanato-κ3N:N:Ntetrakis[(triphenylphosphane-κPsilver(I

    Directory of Open Access Journals (Sweden)

    Peter Frenzel

    2015-10-01

    Full Text Available In the title compound, [{[(C6H53P]Ag}4{NCO}4], a distorted Ag4N4-heterocubane core is set up by four AgI ions being coordinated by the N atoms of the cyanato anions in a μ3-bridging mode. In addition, a triphenylphosphine ligand is datively bonded to each of the AgI ions. Intramolecular Ag...Ag distances as short as 3.133 (9 Å suggest the presence of argentophilic (d10...d10 interactions. Five moderate-to-weak C—H...O hydrogen-bonding interactions are observed in the crystal structure, spanning a three-dimensional network. A region of electron density was treated with the SQUEEZE procedure in PLATON [Spek (2015. Acta Cryst. C71, 9–18] following unsuccessful attempts to model it as being part of disordered tetrahydrofuran solvent molecules. The given chemical formula and other crystal data do not take into account these solvent molecules.

  19. Quantitative determination of 1,4-dioxane and tetrahydrofuran in groundwater by solid phase extraction GC/MS/MS.

    Science.gov (United States)

    Isaacson, Carl; Mohr, Thomas K G; Field, Jennifer A

    2006-12-01

    Groundwater contamination by cyclic ethers, 1,4-dioxane (dioxane), a probable human carcinogen, and tetrahydrofuran (THF), a co-contaminant at many chlorinated solvent release sites, are a growing concern. Cyclic ethers are readily transported in groundwater, yet little is known about their fate in environmental systems. High water solubility coupled with low Henry's law constants and octanol-water partition coefficients make their removal from groundwater problematic for both remedial and analytical purposes. A solid-phase extraction (SPE) method based on activated carbon disks was developed for the quantitative determination of dioxane and THF. The method requires 80 mL samples and a total of 1.2 mL of solvent (acetone). The number of steps is minimized due to the "in-vial" elution of the disks. Average recoveries for dioxane and THF were 98% and 95%, respectively, with precision, as indicated by the relative standard deviation of <2% to 6%. The method quantitation limits are 0.31 microg/L for dioxane and 3.1 microg/L for THF. The method was demonstrated by analyzing groundwater samples for dioxane and THF collected during a single sampling campaign at a TCA-impacted site. Dioxane concentrations and areal extent of dioxane in groundwater were greater than those of either TCA or THF.

  20. Properties of Electrospun Nanofibers of Multi-Block Copolymers of [Poly-ε-caprolactone-b-poly(tetrahydrofuran-co-ε-caprolactone]m Synthesized by Janus Polymerization

    Directory of Open Access Journals (Sweden)

    Muhammad Ijaz Shah

    2017-10-01

    Full Text Available Novel biodegradable multiblock copolymers of [PCL-b-P(THF-co-CL]m with PCL fractions of 53.3 and 88.4 wt % were prepared by Janus polymerization of ε-caprolactone (CL and tetrahydrofuran (THF. Their electrospun mats were obtained with optimized parameters containing bead-free nanofibers whose diameters were between 290 and 520 nm. The mechanical properties of the nanofiber scaffolds were measured showing the tensile strength and strain at break of 8–10 MPa and 123–161%, respectively. Annealing improved their mechanical properties and their tensile strength and strain at break of the samples increased to 10–13 MPa and 267–338%, respectively. Due to the porous structure and crystallization in nanoscale confinement, the mechanical properties of the nanofiber scaffolds appeared as plastics, rather than as the elastomers observed in bulk thermal-molded film.

  1. Theoretical study of singlet oxygen molecule generation via an exciplex with valence-excited thiophene.

    Science.gov (United States)

    Sumita, Masato; Morihashi, Kenji

    2015-02-05

    Singlet-oxygen [O2((1)Δg)] generation by valence-excited thiophene (TPH) has been investigated using multireference Møller-Plesset second-order perturbation (MRMP2) theory of geometries optimized at the complete active space self-consistent field (CASSCF) theory level. Our results indicate that triplet TPH(1(3)B2) is produced via photoinduced singlet TPH(2(1)A1) because 2(1)A1 TPH shows a large spin-orbit coupling constant with the first triplet excited state (1(3)B2). The relaxed TPH in the 1(3)B2 state can form an exciplex with O2((3)Σg(-)) because this exciplex is energetically more stable than the relaxed TPH. The formation of the TPH(1(3)B2) exciplex with O2((3)Σg(-)) whose total spin multiplicity is triplet (T1 state) increases the likelihood of transition from the T1 state to the singlet ground or first excited singlet state. After the transition, O2((1)Δg) is emitted easily although the favorable product is that from a 2 + 4 cycloaddition reaction.

  2. Deprotonation effect of tetrahydrofuran-2-carbonitrile buffer gas dopant in ion mobility spectrometry.

    Science.gov (United States)

    Fernandez-Maestre, Roberto; Meza-Morelos, Dairo; Wu, Ching

    2016-06-15

    When dopants are introduced into the buffer gas of an ion mobility spectrometer, spectra are simplified due to charge competition. We used electrospray ionization to inject tetrahydrofuran-2-carbonitrile (F, 2-furonitrile or 2-furancarbonitrile) as a buffer gas dopant into an ion mobility spectrometer coupled to a quadrupole mass spectrometer. Density functional theory was used for theoretical calculations of dopant-ion interaction energies and proton affinities, using the hybrid functional X3LYP/6-311++(d,p) with the Gaussian 09 program that accounts for the basis set superposition error; analytes structures and theoretical calculations with Gaussian were used to explain the behavior of the analytes upon interaction with F. When F was used as a dopant at concentrations below 1.5 mmol m(-3) in the buffer gas, ions were not observed for α-amino acids due to charge competition with the dopant; this deprotonation capability arises from the production of a dimer with a high formation energy that stabilized the positive charge and created steric hindrance that deterred the equilibrium with analyte ions. F could not completely strip other compounds of their charge because they either showed steric hindrance at the charge site that deterred the approach of the dopant (2,4-lutidine, and DTBP), formed intramolecular bonds that stabilized the positive charge (atenolol), had high proton affinity (2,4-lutidine, DTBP, valinol and atenolol), or were inherently ionic (tetraalkylammonium ions). This selective deprotonation suggests the use of F to simplify spectra of complex mixtures in ion mobility and mass spectrometry in metabolomics, proteomics and other studies that generate complex spectra with thousands of peaks. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  3. Optical detection of ion diffusion in electrochromic poly(3,4-ethylenedioxy)thiophene film using microcantilever electrodes

    DEFF Research Database (Denmark)

    Lin, Rong; Stokbro, Kurt; Madsen, Dorte Nørgaard

    2005-01-01

    potential of the film induced dark (light-absorbing) rings, which spread out from the anode on a time scale of seconds. The rate of expansion of the rings as well as the final diameter depended on the bias voltage. Using two micro four-point probes simultaneously, we measured with one probe the conductance......We present measurements of microscale electrochromic switching of poly(3,4-ethylenedioxy)thiophene doped with poly(4-styrene sulfonate), thin film using microfabricated multi-point probe electrodes. After treatment with a dilute hydrochloric acid, a voltage bias above 3 V with respect to the ground...... of the film outside, near and inside a dark ring induced by a voltage applied to another probe and found the resistivity to be directly related to the observed absorbance of the film. The standard electrochromic mechanism of ion insertion was used to explain the observations. We anticipate this experimental...

  4. One Pot Selective Arylation of 2-Bromo-5-Chloro Thiophene; Molecular Structure Investigation via Density Functional Theory (DFT), X-ray Analysis, and Their Biological Activities.

    Science.gov (United States)

    Rasool, Nasir; Kanwal, Aqsa; Rasheed, Tehmina; Ain, Quratulain; Mahmood, Tariq; Ayub, Khurshid; Zubair, Muhammad; Khan, Khalid Mohammed; Arshad, Muhammad Nadeem; M Asiri, Abdullah; Zia-Ul-Haq, Muhammad; Jaafar, Hawa Z E

    2016-06-28

    Synthesis of 2,5-bisarylthiophenes was accomplished by sequential Suzuki cross coupling reaction of 2-bromo-5-chloro thiophenes. Density functional theory (DFT) studies were carried out at the B3LYP/6-31G(d, p) level of theory to compare the geometric parameters of 2,5-bisarylthiophenes with those from X-ray diffraction results. The synthesized compounds are screened for in vitro bacteria scavenging abilities. At the concentration of 50 and 100 μg/mL, compounds 2b, 2c, 2d, 3c, and 3f with IC50-values of 51.4, 52.10, 58.0, 56.2, and 56.5 μg/mL respectively, were found most potent against E. coli. Among all the synthesized compounds 2a, 2d, 3c, and 3e with the least values of IC50 77, 76.26, 79.13 μg/mL respectively showed significant antioxidant activities. Almost all of the compounds showed good antibacterial activity against Escherichia coli, whereas 2-chloro-5-(4-methoxyphenyl) thiophene (2b) was found most active among all synthesized compound with an IC50 value of 51.4 μg/mL. All of the synthesized compounds were screened for nitric oxide scavenging activity as well. Frontier molecular orbitals (FMOs) and molecular electrostatic potentials of the target compounds were also studied theoretically to account for their relative reactivity.

  5. Differential and integral electron scattering cross sections from tetrahydrofuran (THF) over a wide energy range: 1-10.000 eV

    International Nuclear Information System (INIS)

    Fuss, M.C.; Sanz, A.G.; Blanco, F.; Limao-Vieira, P.; Brunger, M.J.; Garcia, G.

    2014-01-01

    Tetrahydrofuran (THF, C 4 H 8 O) has a molecular structure that is similar to the ribose in the DNA backbone and is used as a surrogate of ribose to get electron scattering cross sections. Total, integral inelastic and integral and differential elastic cross sections have been calculated with the screening-corrected additivity rule (SCAR) method based on the independent atom model (IAM) for electron scattering from THF. Since the permanent dipole moment of THF enhances rotational excitation particularly at low energies and for small angles, an estimate of the rotational excitation cross section was also computed by assuming the interaction with a free electric dipole as an independent, additional process. Our theoretical results compare very favourably to the existing experimental data. Finally, a self-consistent set of integral and differential interaction cross-sections for the incident energy range 1 eV - 10 keV is established for use in our low energy particle track simulation (LEPTS). All cross section data are supplied numerically in tabulated form. (authors)

  6. Mixed-Stack Architecture and Solvatomorphism of Trimeric Perfluoro-ortho-Phenylene Mercury complexes with Dithieno[3,2-b:2',3'-d]thiophene

    KAUST Repository

    Castañeda, Raúl

    2015-08-01

    The formation of the mixed-stack donor-acceptor complex of dithieno[3,2-b:2\\',3\\'-d]thiophene (1) and trimeric perfluoro-ortho-phenylene mercury (I) has been investigated under different conditions. Two solvatomorphs – mixed-stack complexes with a 1:1 donor-acceptor ratio and different solvent molecules in the solid state (dichloromethane (2) and dichloroethane (3)) have been obtained and characterized by experimental methods (FT-IR spectroscopy, differential thermogravimetric analysis, and X-ray crystallography) and quantum-chemical calculations at the density functional theory level. The differences in the solid state packing, thermal stability and potential charge-transfer properties of 2 and 3 are discussed.

  7. Le souffre thiophénique dans les pétroles et les extraits de roche. Analyse par spectrométrie de masse et chromatographie en phase gazeuse Mass-Spectrometry and Gas-Chromatography Analysis of Thiophene Sulfur in Oil and Rock Extracts

    Directory of Open Access Journals (Sweden)

    Castex H.

    2006-11-01

    Full Text Available On étudie par spectrométrie de masse à haute résolution la répartition du soufre thiophénique par coupe de distillation et par nombre de carbone dans la fraction > C10 d'un pétrole brut. Parallèlement on chromatographie à l'aide d'un détecteur sélectif à photométrie de flamme les diverses fractions thiophéniques. L'examen des chromatogrammes permet de déterminer les zones dé réponse et l'allure générale des différentes coupes thiophéniques. Les applications sont variées : on vérifie le bien-fondé de l'utilisation d'un spectromètre de masse à basse résolution pour les analyses en routine d'huiles brutes et on peut, par la connaissance des différents profils de type thiophénique prévoir des analogies ou des différences au sein d'huiles brutes et d'extraits de roche d'un même bassin pétrolier, ce qui limite le nombre d'échantillons à analyser en détail. High-resolution mass spectrometry is used to analyze the distribution of thiophenic sulfur per distillation cut and per carbon number in the > C10 fraction of a crude oil. At the same time, a selective flame-photometry sensor is used to chromatograph the different thiophenic fractions. An analysis of the chromatograms serves to determine the response zones and the general aspect of the different thiophenic cuts. There are various applications of this process. The validity of using a low-resolution mass spectrometer is checked for routine crude-cil analyses. By determining the different profiles of the thiophenic type, similarities or differences can be predicted in the crude cils and rock extracts from the saure cil basin. This limits the number of samples having to be analyzed in detail.

  8. Effect tetrahydrofuran as solvent in the synthesis of mullite by the Pechini; Efeito do tetrahidrofurano como solvente na sintese de mulita pelo Metodo Pechini

    Energy Technology Data Exchange (ETDEWEB)

    Braga, A.N.S.; Santos, V.B. [Universidade Federal do Piaui (UFPI), Teresina, PI (Brazil); Simoes, V.N.; Neves, G.A.; Lira, H.L.; Menezes, R.R., E-mail: Aluskasimoes@homail.com [Universidade Federal de Campina Grande (UFCG), PB (Brazil)

    2016-07-01

    Mullite has been considered interesting in recent decades, due to its properties. The reaction mechanisms in the mullite formation may vary according to the precursor and the methods employed. In order to get mullite by a promising chemical synthesis and understudied in its production, this paper aims to synthesize mullite by Pechini method. We investigated the mullite crystallization kinetics from use of tetrahydrofuran as solvent. The samples were characterized by diffraction of X-ray (XRD), thermal analysis and scanning electron microscopy (SEM). The XRD results showed the formation of mullite, but together with the alpha alumina phase. Thermal analysis confirmed the disruption of the polymer chain prior to the formation of crystalline phases, with a total weight loss of 97%. The SEM showed a morphology consists of large aggregates, damaging the properties of refractory and performance of the material. (author)

  9. Thiophene-based rhodamine as selectivef luorescence probe for Fe(III) and Al(III) in living cells.

    Science.gov (United States)

    Wang, Kun-Peng; Chen, Ju-Peng; Zhang, Si-Jie; Lei, Yang; Zhong, Hua; Chen, Shaojin; Zhou, Xin-Hong; Hu, Zhi-Qiang

    2017-09-01

    The thiophene-modified rhodamine 6G (GYJ) has been synthesized as a novel chemosensor. The sensor has sufficiently high selectivity and sensitivity for the detection of Fe 3+ and Al 3+ ions (M 3+ ) by fluorescence and ultraviolet spectroscopy with a strong ability for anti-interference performance. The binding ratio of M 3+ -GYJ complex was determined to be 2:1 according to the Job's plot. The binding constants for Fe 3+ and Al 3+ were calculated to be 3.91 × 10 8 and 5.26 × 10 8  M -2 , respectively. All these unique features made it particularly favorable for cellular imaging applications. The obvious fluorescence microscopy experiments demonstrated that the probes could contribute to the detection of Fe 3+ and Al 3+ in related cells and biological organs with satisfying resolution. Graphical abstract GYJ has high selectivity and sensitivity for the detection of Fe(III) and Al(III) with the binding ratio of 2:1.

  10. Effect of benzene and ethylbenzene on the transcription of methyl-tert-butyl ether degradation genes of Methylibium petroleiphilum PM1.

    Science.gov (United States)

    Joshi, Geetika; Schmidt, Radomir; Scow, Kate M; Denison, Michael S; Hristova, Krassimira R

    2016-09-01

    Methyl-tert-butyl ether (MTBE) and its degradation by-product, tert-butyl alcohol (TBA), are widespread contaminants detected frequently in groundwater in California. Since MTBE was used as a fuel oxygenate for almost two decades, leaking underground fuel storage tanks are an important source of contamination. Gasoline components such as BTEX (benzene, toluene, ethylbenzene and xylenes) are often present in mixtures with MTBE and TBA. Investigations of interactions between BTEX and MTBE degradation have not yielded consistent trends, and the molecular mechanisms of BTEX compounds' impact on MTBE degradation are not well understood. We investigated trends in transcription of biodegradation genes in the MTBE-degrading bacterium, Methylibium petroleiphilum PM1 upon exposure to MTBE, TBA, ethylbenzene and benzene as individual compounds or in mixtures. We designed real-time quantitative PCR assays to target functional genes of strain PM1 and provide evidence for induction of genes mdpA (MTBE monooxygenase), mdpJ (TBA hydroxylase) and bmoA (benzene monooxygenase) in response to MTBE, TBA and benzene, respectively. Delayed induction of mdpA and mdpJ transcription occurred with mixtures of benzene and MTBE or TBA, respectively. bmoA transcription was similar in the presence of MTBE or TBA with benzene as in their absence. Our results also indicate that ethylbenzene, previously proposed as an inhibitor of MTBE degradation in some bacteria, inhibits transcription of mdpA, mdpJ and bmoAgenes in strain PM1.

  11. Assessing soil ecotoxicity of methyl tert-butyl ether using earthworm bioassay; closed soil microcosm test for volatile organic compounds

    International Nuclear Information System (INIS)

    An, Youn-Joo

    2005-01-01

    An earthworm bioassay was conducted to assess ecotoxicity in methyl tert-butyl ether (MTBE)-amended soils. Ecotoxicity of MTBE to earthworms was evaluated by a paper contact method, natural field soil test, and an OECD artificial soil test. All tests were conducted in closed systems to prevent volatilization of MTBE out of test units. Test earthworm species were Perionyx excavatus and Eisenia andrei. Mortality and abnormal morphology of earthworms exposed to different concentrations of MTBE were examined. MTBE was toxic to both earthworm species and the severity of response increased with increasing MTBE concentrations. Perionyx excavatus was more sensitive to MTBE than Eisenia andrei in filter papers and two different types of soils. MTBE toxicity was more severe in OECD artificial soils than in field soils, possibly due to the burrowing behavior of earthworms into artificial soils. The present study demonstrated that ecotoxicity of volatile organic compounds such as MTBE can be assessed using an earthworm bioassay in closed soil microcosm with short-term exposure duration. - Earthworm bioassay can be a good protocol to assess soil ecotoxicity of volatile organic compounds such as MTBE

  12. Synthesis of New Chiral Ligands Based on Thiophene Derivatives for Use in Catalytic Asymmetric Oxidation of Sulfides

    International Nuclear Information System (INIS)

    Jeong, Yong Chul; Ahn, Dae Jun; Lee, Woo Sun; Lee, Seung Han; Ahn, Kwang Hyun

    2011-01-01

    We discovered that the vanadium complexes of new Schiff base ligands and prepared from thiophene derivatives efficiently catalyze the asymmetric oxidation of sulfides by hydrogen peroxide to provide sulfoxides with enantioselectivities up to 79% ee and in yields up to 89%. Notably, Schiff base showed better or similar enantioselectivity than the well-studied Schiff base. These results suggest possible applications of Schiff bases derived from and in other catalytic asymmetric reactions. Chiral sulfoxides are important functional groups for various applications. For example, the biological activities of sulfoxide containing drugs such as omeprazole are strongly related to the chirality of the sulfoxide group; for this reason, esomeprazole, the enantiomerically pure form of omeprazole, was later developed. There are several chiral sulfoxide based drugs that have been introduced by the pharmaceutical industry including armodafinil, aprikalim, oxisurane, and ustiloxin. Chiral sulfoxides have also been utilized as chiral auxiliaries in asymmetric syntheses of chiral intermediates

  13. Regular square planer bis-(4,4,4-trifluoro-1-(thiophen-2-yl)butane-1,3-dione)/copper(II) complex: Trans/cis-DFT isomerization, crystal structure, thermal, solvatochromism, hirshfeld surface and DNA-binding analysis

    Science.gov (United States)

    Hema, M. K.; Karthik, C. S.; Warad, Ismail; Lokanath, N. K.; Zarrouk, Abdelkader; Kumara, Karthik; Pampa, K. J.; Mallu, P.

    2018-04-01

    Trans-[Cu(O∩O)2] complex, O∩O = 4,4,4-trifluoro-1-(thiophen-2-yl)butane-1,3-dione was reported with high potential toward CT-DNA binder. The solved XRD-structure of complex indicated a perfect regular square-planer geometry around the Cu(II) center. The trans/cis-DFT-isomerization calculation supported the XRD seen in reflecting the trans-isomer as the kinetic-favor isomer. The desired complex structure was also characterized by conductivity measurement, CHN-elemental analyses, MS, EDX, SEM, UV-Vis., FT-IR, HAS and TG/DTG. The Solvatochromism behavior of the complex was evaluated using four different polar solvents. MPE and Hirshfeld surface analysis (HSA) come to an agreement that fluoride and thiophene protons atoms are with suitable electro-potential environment to form non-classical H-bonds of type CThsbnd H⋯F. The DNA-binding properties were investigated by viscosity tests and spectrometric titrations, the results revealed the complex as strong calf-thymus DNA binder. High intrinsic-binding constants value ∼1.8 × 105 was collected.

  14. Selective adsorption of thiophenic compounds from fuel over TiO{sub 2}/SiO{sub 2} under UV-irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Miao, Guang [School of Chemistry and Chemical Engineering, South China University of Technology, Guangzhou 510640 (China); Ye, Feiyan [Key Laboratory of Enhanced Heat Transfer and Energy Conservation of the Ministry of Education South China University of Technology, Guangzhou 510640 (China); Wu, Luoming; Ren, Xiaoling [School of Chemistry and Chemical Engineering, South China University of Technology, Guangzhou 510640 (China); Xiao, Jing, E-mail: cejingxiao@scut.edu.cn [School of Chemistry and Chemical Engineering, South China University of Technology, Guangzhou 510640 (China); Li, Zhong, E-mail: cezhli@scut.edu.cn [Key Laboratory of Enhanced Heat Transfer and Energy Conservation of the Ministry of Education South China University of Technology, Guangzhou 510640 (China); Wang, Haihui [Key Laboratory of Enhanced Heat Transfer and Energy Conservation of the Ministry of Education South China University of Technology, Guangzhou 510640 (China)

    2015-12-30

    Highlights: • TiO{sub 2}/SiO{sub 2} was developed for selective adsorption of DBTs under UV irradiation. • Remarkable adsorption uptake and selectivity were achieved for deep desulfurization. • Introduction of TiO{sub 2} into SiO{sub 2} enhanced its adsorption for DBTO{sub 2}. • Adsorption mechanism using TiO{sub 2}/SiO{sub 2} under UV irradiation was elucidated. - Abstract: This study investigates selective adsorption of thiophenic compounds from fuel over TiO{sub 2}/SiO{sub 2} under UV-irradiation. The TiO{sub 2}/SiO{sub 2} adsorbents were prepared and then characterized by N{sub 2} adsorption, X-ray diffraction and X-ray photoelectron spectroscopy. Adsorption isotherms, selectivity and kinetics of TiO{sub 2}/SiO{sub 2} were measured in a UV built-in batch reactor. It was concluded that (a) with the employment of UV-irradiation, high organosulfur uptake of 5.12 mg/g was achieved on the optimized 0.3TiO{sub 2}/0.7SiO{sub 2} adsorbent at low sulfur concentration of 15 ppmw-S, and its adsorption selectivity over naphthalene was up to 325.5; (b) highly dispersed TiO{sub 2} served as the photocatalytic sites for DBT oxidation, while SiO{sub 2} acted as the selective adsorption sites for the corresponding oxidized DBT using TiO{sub 2} as a promoter, the two types of active sites worked cooperatively to achieve the high adsorption selectivity of TiO{sub 2}/SiO{sub 2}; (c) The kinetic rate-determining step for the UV photocatalysis-assisted adsorptive desulfurization (PADS) over TiO{sub 2}/SiO{sub 2} was DBT oxidation; (d) consecutive adsorption-regeneration cycles suggested that the 0.3TiO{sub 2}/0.7SiO{sub 2} adsorbent can be regenerated by acetonitrile washing followed with oxidative air treatment. This work demonstrated an effective PADS approach to greatly enhance adsorption capacity and selectivity of thiophenic compounds at low concentrations for deep desulfurization under ambient conditions.

  15. New Insights into the Mechanisms of Photodegradation/Stabilization of P3HT:PCBM Active Layers Using Poly(3-hexyl-d13-Thiophene)

    DEFF Research Database (Denmark)

    Tournebize, Aurelien; Bussiere, Pierre-Olivier; Rivaton, Agnes

    2013-01-01

    species involved in the chain radical oxidation of P3HT is a key characteristic in the underlying mechanism. The results obtained in this work advance the understanding of active layer stability and will help improve the design of long lifetime organic solar cells thanks to the use of cutoff filter......The photo-oxidation mechanism of thin-film blends based on poly(3-hexylthiophene):phenyl-C-61-butyric acid methyl ester (P3HT:PCBM) upon irradiation with ultraviolet-visible light (UV-Vis) was studied. The use of deuterated P3HT, i.e., poly(3-hexyl-d(13)-thiophene) (P3HdT), permitted discrimination...

  16. X-shape oligo(thiophene)s as donor materials for vacuum-deposited organic photovoltaic cells

    Institute of Scientific and Technical Information of China (English)

    Wang Ya-Nan; Zhou Yin-Hua; Xu Yue; Sun Xiao-Bo; Wu Wei-Cai; Tian Wen-Jing; Liu Yun-Qi

    2008-01-01

    The films of two x-shape oligo(thiophene)s, 3, 4-dibithienyl-2, 5-dithienylthiophene (TT) and 2, 5-dibithienyl-3, 4-ditrithienylthiophene (11T), which are prepared by vacuum evaporation, have been investigated as novel electron donor layers in two-layer photovoltaic cells. UV-Vis absorptions show red-shifted and broadened absorptions of the vacuumevaporated films as compared with those of the corresponding solutions and spin-coating films, which is beneficial for photovoltaic properties. X-ray diffraction (XRD) and differential scanning calorimetry (DSC) measurements show that the vacuum-evaporated films are almost amorphous. Two-layer photovoltaic cells have been realized by the thermal evaporation of 7T and 11T as donors and N, N'-bis(1-ethylpropyl)-3, 4:9,10-perylene bis(tetracarboxyl diimide) (EPPTC) as an acceptor. An energy conversion efficiency (ECE) of 0.18% of the cell based on 7T with an irradiation of white light at 100 mw/cm2 has been demonstrated by the measurements of current (Ⅰ)- voltage (Ⅴ) curves of the cells to be higher than the ECE of the reference system based on donor dihexylterthienyl (H3T) that is linear and without á, a linkage.

  17. Occurrence and implications of methyl tert-butyl ether and gasoline hydrocarbons in ground water and source water in the United States and in drinking water in 12 Northeast and Mid-Atlantic States, 1993-2002

    Science.gov (United States)

    Moran, Michael J.; Zogorski, John S.; Squillace, Paul J.

    2004-01-01

    The occurrence and implications of methyl tert-butyl ether (MTBE) and gasoline hydrocarbons were examined in three surveys of water quality conducted by the U.S. Geological Survey?one national-scale survey of ground water, one national-scale survey of source water from ground water, and one regional-scale survey of drinking water from ground water. The overall detection frequency of MTBE in all three surveys was similar to the detection frequencies of some other volatile organic compounds (VOCs) that have much longer production and use histories in the United States. The detection frequency of MTBE was higher in drinking water and lower in source water and ground water. However, when the data for ground water and source water were limited to the same geographic extent as drinking-water data, the detection frequencies of MTBE were comparable to the detection frequency of MTBE in drinking water. In all three surveys, the detection frequency of any gasoline hydrocarbon was less than the detection frequency of MTBE. No concentration of MTBE in source water exceeded the lower limit of U.S. Environmental Protection Agency's Drinking-Water Advisory of 20 ?g/L (micrograms per liter). One concentration of MTBE in ground water exceeded 20 ?g/L, and 0.9 percent of drinking-water samples exceeded 20 ?g/L. The overall detection frequency of MTBE relative to other widely used VOCs indicates that MTBE is an important concern with respect to ground-water management. The probability of detecting MTBE was strongly associated with population density, use of MTBE in gasoline, and recharge, and weakly associated with density of leaking underground storage tanks, soil permeability, and aquifer consolidation. Only concentrations of MTBE above 0.5 ?g/L were associated with dissolved oxygen. Ground water underlying areas with high population density, ground water underlying areas where MTBE is used as a gasoline oxygenate, and ground water underlying areas with high recharge has a greater

  18. The uptake, distribution, metabolism, and excretion of methyl tertiary-butyl ether inhaled alone and in combination with gasoline vapor.

    Science.gov (United States)

    Benson, Janet M; Tibbetts, Brad M; Barr, Edward B

    2003-06-13

    The purpose of these studies was to evaluate the tissue uptake, distribution, metabolism, and excretion of methyl tertiary-butyl ether (MTBE) in rats and to determine the effects of coinhalation of the volatile fraction of unleaded gasoline on these parameters. Male F344 rats were exposed nose-only once for 4 h to 4, 40, or 400 ppm 14C-MTBE and to 20 and 200 ppm of the light fraction of unleaded gasoline (LFG) containing 4 and 40 ppm 14C-MTBE, respectively. To evaluate the effects of repeated inhalation of LFG on the fate of inhaled MTBE, rats were exposed for 7 consecutive days to 20 and 200 ppm LFG followed on d 8 by exposure to LFG containing 14C-MTBE. Three subgroups of rats were included for evaluation of respiratory parameters, rates and routes of excretion, and tissue distribution and elimination. MTBE and its chief metabolite, tertiary-butyl alcohol, were quantitated in blood and kidney (immediately after exposure), and the major urinary metabolites, 2-hydroxyisobutyric acid and 2-methyl-1,2- propanediol, were identified and quantified in urine. Inhalation of MTBE alone or as a component of LFG had no concentration-dependent effect on respiratory minute volume. The initial body burdens (IBBs) of MTBE equivalents achieved after 4 h of exposure to MTBE did not increase linearly with exposure concentration. MTBE equivalents rapidly distributed to all tissues examined, with the largest percentages distributed to liver. Between 40 and 400 ppm, there was a significant reduction in percentage of the IBB present in the major organs examined, both immediately and 72 h after exposure. At 400 ppm, the elimination rates of MTBE equivalents from tissues changed significantly. Furthermore, at 400 ppm there was a significant decrease in the elimination half-time of volatile organic compounds (VOCs) in breath and a significant increase in the percentage of the IBB of MTBE equivalents eliminated as VOCs in breath. LFG coexposure significantly decreased the percentage of the

  19. Preparations, structures and properties of heterobimetallic complexes based on tetrahydrofuran-2,3,4,5-tetracarboxylate

    International Nuclear Information System (INIS)

    Jia, Tian-Jing; Li, Shu-Mu; Cao, Wei; Li, Li-Cun; Zheng, Xiang-Jun; Yuan, Da-Qiang

    2013-01-01

    Transition heterobimetallic metal-organic frameworks based on tetrahydrofuran-2,3,4,5-tetracarboxylicate (FTA), namely [M(H 2 O) 6 ][Cu 2 M(FTA) 2 (H 2 O) 2 ]·4H 2 O [M=Mn (1), Co (2)], and [CuZn(FTA)(H 2 O) 5 ]·H 2 O (3) have been synthesized and characterized. Single-crystal X-ray diffraction indicates that complexes 1 and 2 are isomorphic. In 1 and 2, FTA ligand links the metal ions to a 2-D wave-like negative-charged layer with a topology of (4;6 2 ) 2 (4;6 3 ;8 2 ) 2 (6). They possess 1-D channels with [M(H 2 O) 6 ] 2+ and lattice water molecules enclathrated. While in the complex 3, Cu 2+ and Zn 2+ ions are bridged by FTA to a 2-D neutral layer structure with a (8) 2 (8 4 ;12 2 ) topology. Magnetic properties of 1–3 were analyzed in connection with their structures, which show that there exist weak antiferromagnetic interactions between metal ions. - Graphical abstract: Three heterobimetallic MOFs were constructed through the size-selectivity of TFA coordination sites for different transition metal ions based on the concept of “Hard and Soft Acids and Bases”. Highlights: ► Complexes 1 and 3 contain 2-D wave-like negative-charged layers. ► Complex 2 is a 2-D neutral layer structure with a (8) 2 (8 4 ;12 2 ) topology. ► Complexes 1–3 are the first example of heterobimetallic MOFs based on FTA. ► The coordination sites of FTA show size-selectivity to metal ions

  20. Preparations, structures and properties of heterobimetallic complexes based on tetrahydrofuran-2,3,4,5-tetracarboxylate

    Energy Technology Data Exchange (ETDEWEB)

    Jia, Tian-Jing; Li, Shu-Mu; Cao, Wei [College of Chemistry, Beijing Normal University, Beijing 100875 (China); Li, Li-Cun [College of Chemistry, Nankai University, Tianjin 300071 (China); Zheng, Xiang-Jun, E-mail: xjzheng@bnu.edu.cn [College of Chemistry, Beijing Normal University, Beijing 100875 (China); Yuan, Da-Qiang [State Key Laboratory of Structural Chemistry, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou, Fujian 350002 (China)

    2013-05-01

    Transition heterobimetallic metal-organic frameworks based on tetrahydrofuran-2,3,4,5-tetracarboxylicate (FTA), namely [M(H₂O)₆][Cu₂M(FTA)₂(H₂O)₂]·4H₂O [M=Mn (1), Co (2)], and [CuZn(FTA)(H₂O)₅]·H₂O (3) have been synthesized and characterized. Single-crystal X-ray diffraction indicates that complexes 1 and 2 are isomorphic. In 1 and 2, FTA ligand links the metal ions to a 2-D wave-like negative-charged layer with a topology of (4;6²)₂(4;6³;8²)₂(6). They possess 1-D channels with [M(H₂O)₆]²⁺ and lattice water molecules enclathrated. While in the complex 3, Cu²⁺ and Zn²⁺ ions are bridged by FTA to a 2-D neutral layer structure with a (8)₂(8⁴;12²) topology. Magnetic properties of 1–3 were analyzed in connection with their structures, which show that there exist weak antiferromagnetic interactions between metal ions. - Graphical abstract: Three heterobimetallic MOFs were constructed through the size-selectivity of TFA coordination sites for different transition metal ions based on the concept of “Hard and Soft Acids and Bases”. Highlights: • Complexes 1 and 3 contain 2-D wave-like negative-charged layers. • Complex 2 is a 2-D neutral layer structure with a (8)₂(8⁴;12²) topology. • Complexes 1–3 are the first example of heterobimetallic MOFs based on FTA. • The coordination sites of FTA show size-selectivity to metal ions.

  1. Diverse Reactions of Thiophenes, Selenophenes, and Tellurophenes with Strongly Oxidizing I(III) PhI(L)2 Reagents.

    Science.gov (United States)

    Egalahewa, Sathsara; Albayer, Mohammad; Aprile, Antonino; Dutton, Jason L

    2017-02-06

    We report the outcomes of the reactions of aromatic group 16 thiophene, selenophene, and tellurophene rings with the I(III) oxidants PhI(OAc)(OTf) and [PhI(Pyr) 2 ][OTf] 2 (Pyr = pyridine). In all reactions, oxidative processes take place, with generation of PhI as the reduction product. However, with the exception of tellurophene with PhI(OAc)(OTf), +4 oxidation state complexes are not observed, but rather a variety of other processes occur. In general, where a C-H unit is available on the 5-membered ring, an electrophilic aromatic substitution reaction of either -IPh or pyridine onto the ring occurs. When all positions are blocked, reactions with PhI(OAc)(OTf) give acetic and triflic anhydride as the identifiable oxidative byproducts, while [PhI(Pyr) 2 ][OTf] 2 gives pyridine electrophilic aromatic substitution onto the peripheral rings. Qualitative mechanistic studies indicate that the presence of the oxidizable heteroatom is required for pyridine to act as an electrophile in a substantial manner.

  2. Influence of electron delocalization in heterocyclic core systems on the electrochemical communication in 2,5-di- and 2,3,4,5-tetraferrocenyl thiophenes, furans, and pyrroles.

    Science.gov (United States)

    Hildebrandt, Alexander; Schaarschmidt, Dieter; Claus, Ron; Lang, Heinrich

    2011-11-07

    A series of 2,5-di- and 2,3,4,5-tetraferrocenyl-substituted thiophenes, furans, and pyrroles were synthesized using the Negishi C,C cross-coupling protocol. The electronic and electrochemical properties of these compounds were investigated by cyclic voltammetry (CV), square wave voltammetry (SWV), and in situ UV-vis/NIR spectroscopy. The molecular structures of 2,5-diferrocenyl furan and 2,3,4,5-tetraferrocenyl-1-methyl-1H-pyrrole in the solid state are discussed. The ferrocenyls could sequentially be oxidized giving two or four reversible responses for the appropriate di- or tetraferrocenyl-substituted heterocyclic molecules. The observed ΔE°' values range between 186 and 450 mV. The NIR measurements confirm electronic communication as intervalence charge transfer (IVCT) absorptions were found in the corresponding mono- and in case of the tetraferrocenyl compounds also in the dicationic species. All compounds, except tetraferrocenyl thiophene (a class I system), were classified as class II systems according to Robin and Day. They show a linear relationship between ΔE°' and the IVCT oscillator strength f which could be shown for the first time in organometallic chemistry. This was possible because the series of molecules exhibit analogous geometries and hence, similar electrostatic properties. This correlation was confirmed by electro- and spectro-electrochemical measurements. Within these studies a new approach for the estimation of the effective electron transfer distances r(ab) is discussed. © 2011 American Chemical Society

  3. Prediction of the chemo- and regioselectivity of Diels-Alder reactions of o-benzoquinone derivatives with thiophenes by means of DFT-based reactivity indices

    Science.gov (United States)

    Ghomri, Amina; Mekelleche, Sidi Mohamed

    2014-03-01

    Global and local reactivity indices derived from density functional theory were used to elucidate the regio- and chemoselectivity of Diels-Alder reactions of masked o-benzoquinones with thiophenes acting as dienophiles. The polarity of the studied reactions is evaluated in terms of the difference of electrophilicity powers between the diene and dienophile partners. Preferential cyclisation modes of these cycloadditions are predicted using Domingo's polar model based on the local electrophilicity index, ωk, of the electrophile and the local nucleophilicity index, Nuk, of the nucleophile. The theoretical calculations, carried out at the B3LYP/6-311G(d,p) level of theory, are in good agreement with experimental findings.

  4. Synthesis, characterization and biological activity of some transition metals with Schiff base derived from 2-thiophene carboxaldehyde and aminobenzoic acid

    Science.gov (United States)

    Mohamed, Gehad G.; Omar, M. M.; Hindy, Ahmed M. M.

    2005-12-01

    Metal complexes of Schiff base derived from 2-thiophene carboxaldehyde and 2-aminobenzoic acid (HL) are reported and characterized based on elemental analyses, IR, 1H NMR, solid reflectance, magnetic moment, molar conductance and thermal analysis (TGA). The ligand dissociation as well as the metal-ligand stability constants were calculated pH metrically at 25 °C and ionic strength μ = 0.1 (1 M NaCl). The complexes are found to have the formulae [M(HL) 2](X) n· yH 2O (where M = Fe(III) (X = Cl, n = 3, y = 3), Co(II) (X = Cl, n = 2, y = 1.5), Ni(II) (X = Cl, n = 2, y = 1) and UO 2(II) (X = NO 3, n = 2, y = 0)) and [M(L) 2] (where M = Cu(II) (X = Cl) and Zn(II) (X = AcO)). The molar conductance data reveal that Fe(III) and Co(II), Ni(II) and UO 2(II) chelates are ionic in nature and are of the type 3:1 and 2:1 electrolytes, respectively, while Cu(II) and Zn(II) complexes are non-electrolytes. IR spectra show that HL is coordinated to the metal ions in a terdentate manner with ONS donor sites of the carboxylate O, azomethine N and thiophene S. From the magnetic and solid reflectance spectra, it is found that the geometrical structure of these complexes are octahedral. The thermal behaviour of these chelates shows that the hydrated complexes losses water molecules of hydration in the first step followed immediately by decomposition of the anions and ligand molecules in the subsequent steps. The activation thermodynamic parameters, such as, E*, Δ H*, Δ S* and Δ G* are calculated from the DrTG curves using Coats-Redfern method. The synthesized ligands, in comparison to their metal complexes also were screened for their antibacterial activity against bacterial species, Escherichia coli, Pseudomonas aeruginosa, Staphylococcus pyogones and Fungi (Candida). The activity data show that the metal complexes to be more potent/antibacterial than the parent Schiff base ligand against one or more bacterial species.

  5. Methyl tert-butyl ether biodegradation by indigenous aquifer microorganisms under natural and artificial oxic conditions

    Science.gov (United States)

    Landmeyer, J.E.; Chapelle, F.H.; Herlong, H.H.; Bradley, P.M.

    2001-01-01

    Microbial communities indigenous to a shallow groundwater system near Beaufort, SC, degraded milligram per liter concentrations of methyl tert-butyl ether (MTBE) under natural and artificial oxic conditions. Significant MTBE biodegradation was observed where anoxic, MTBE-contaminated groundwater discharged to a concrete-lined ditch. In the anoxic groundwater adjacent to the ditch, concentrations of MTBE were > 1 mg/L. Where groundwater discharge occurs, dissolved oxygen (DO) concentrations beneath the ditch exceeded 1.0 mg/L to a depth of 1.5 m, and MTBE concentrations decreased to CO2 in laboratory liquid culture studies, with no accumulation of intermediate compounds. Upgradient of the ditch in the anoxic, MTBE and BTEX-contaminated aquifer, addition of a soluble oxygen release compound resulted in oxic conditions and rapid MTBE biodegradation by indigenous microorganisms. In an observation well located closest to the oxygen addition area, DO concentrations increased from 0.4 to 12 mg/L in <60 days and MTBE concentrations decreased from 20 to 3 mg/L. In the same time period at a downgradient observation well, DO increased from <0.2 to 2 mg/L and MTBE concentrations decreased from 30 to <5 mg/L. These results indicate that microorganisms indigenous to the groundwater system at this site can degrade milligram per liter concentrations of MTBE under natural and artificial oxic conditions.

  6. Volumetric properties of binary mixtures of N-ethylformamide with tetrahydrofuran, 2-butanone, and ethylacetate from T = (293.15 to 313.15) K

    International Nuclear Information System (INIS)

    Gadžurić, Slobodan; Nikolić, Aleksandar; Vraneš, Milan; Jović, Branislav; Damjanović, Marko; Dožić, Sanja

    2012-01-01

    Highlights: ► Densities of N-ethylformamide mixtures with ketones and esters were measured. ► Excess molar volumes were fitted to Redlich–Kister polynomial equation. ► Excess molar volumes are negative in the whole mole fraction range. ► Increase of the temperature has influence on N-ethylformamide self-association. ► Complex formation between the components was not observed. - Abstract: Densities of binary liquid mixtures of N-ethylformamide (NEF) with tetrahydrofuran (THF), 2-butanone (B), and ethylacetate (EA) were measured at temperatures from (293.15 to 313.15) K and at atmospheric pressure over the whole composition range. Excess molar volumes, V E , have been obtained from values of the experimental density and were fitted to the Redlich–Kister polynomial equation. The V E values for all three mixtures are negative over the entire composition and temperature ranges. The V E values become more negative as the temperature increases for all binary mixtures studied. Other volumetric properties, such as isobaric thermal expansion coefficients, partial molar volumes, apparent molar volumes, partial molar excess volumes and excess thermal expansions have been calculated.

  7. Low Band Gap Donor–Acceptor Type Polymers Containing 2,3-Bis(4-(decyloxyphenylpyrido[4,3-b]pyrazine as Acceptor and Different Thiophene Derivatives as Donors

    Directory of Open Access Journals (Sweden)

    Yan Zhang

    2016-10-01

    Full Text Available Four donor–acceptor type conducting polymers, namely poly(2,3-bis(4-decyloxyphenyl-5,8-bis(4-thiophen-2-ylpyrido[4,3-b]pyrazine (P1, poly(2,3-bis(4-decyloxyphenyl-5,8-bis(4-butylthiophen-2-ylpyrido[4,3-b]pyrazine (P2, poly(2,3-bis(4-(decyloxyphenyl-5,8-bis(4-hexyloxythiophen-2-ylpyrido[4,3-b]pyrazine (P3 and poly(2,3-bis(4-(decyloxyphenyl-5,8-bis(2,3-dihydrothieno[3,4-b][1,4]dioxin-7-ylpyrido[4,3-b]pyrazine (P4, containing thiophene or its derivative as the donor and pyrido[4,3-b]pyrazine as the acceptor were prepared and characterized by cyclic voltammetry, scanning electron microscopy, and UV-Vis spectroscopy to detect the influence of the donor units’ strength on the electrochromic performances. The results demonstrated that all of the polymers could be reversibly reduced and oxidized by p-type doping and n-type doping, and showed near-infrared activities and different color changes in p-type doping process. Especially, P3 and P4 showed lower optical band gap than P1 and P2 due to the strong electron-donating hexyloxythiophen group of P3 and ethylenedioxythiophene group of P4. Besides, P3 and P4 displayed the saturated green color at the neutral state and the desirable transparency at the oxidized state. All the polymers displayed desirable optical contrasts, satisfactory coloration efficiency, excellent stability and short switching time, which made the polymers fascinating candidates in the electrochromic device applications.

  8. Oligo- and polymeric FET devices: Thiophene-based active materials and their interaction with different gate dielectrics

    International Nuclear Information System (INIS)

    Porzio, W.; Destri, S.; Pasini, M.; Bolognesi, A.; Angiulli, A.; Di Gianvincenzo, P.; Natali, D.; Sampietro, M.; Caironi, M.; Fumagalli, L.; Ferrari, S.; Peron, E.; Perissinotti, F.

    2006-01-01

    Derivatives of both oligo- and polythiophene-based FET were recently considered for low cost electronic applications. In the device optimization, factors like redox reversibility of the molecule/polymer, electronic level compatibility with source/drain electrodes, packing closeness, and orientation versus the electrodes, can determine the overall performance. In addition, a gate insulator with a high dielectric constant, a low leakage current, and capability to promote ordering in the semiconductor is required to increase device performances and to lower the FET operating voltage. In this view, Al 2 O 3 appears a good candidate, although its widespread adoption is limited by the disorder that such oxide induces on the semiconductor with detrimental consequences on semiconductor electrical properties. In this contribution, an overview of recent results obtained on thiophene-derivative-based FET devices, fabricated by different growth techniques, and using both thermally grown SiO 2 and Al 2 O 3 from atomic layer deposition gate insulators will be reported and discussed with particular reference to organic solid state aggregation, morphology, and organic-inorganic interface

  9. Molecular Interactions in 1,4-Dioxane, Tetrahydrofuran, and Ethyl Acetate Solutions of 1,1'-Bis(4-isopropyloxyacetylphenoxy)cyclohexane on Reological, Density, and Acoustic Behavior

    Science.gov (United States)

    Dhaduk, B. B.; Patel, Ch. B.; Parsania, P. H.

    2017-12-01

    Various thermo-acoustical parameters of 1,4-dioxane, tetrahydofuran and ethylacetae solutions of 1,1'-bis(4-isopropyloxyacetylphenoxy)cyclohexane were determined at different temperatures using density, viscosity and ultrasonic speed and correlated with concentration. Linear increase of ultrasonic speed, specific acoustical impedance, Rao's molar sound function, Van der Waals constant and free volume with concentration C and decreased with temperature. Linear decrease of adiabatic compressibility, internal pressure, intermolecular free path length, classical absorption coefficient, and viscous relaxation time with concentration and increased with temperature indicated existence of strong molecular interactions in solutions and further supported by positive values of solvation number. Gibbs free energy of activation decreased with C in all three systems. It is decreased with T in 1,4-dioxane, while increased in tetrahydrofuran and ethyl acetate. Both enthalpy of activation and entropy of activation are increased gradually with C in 1,4-dioxane, while they are negative and remained practically independent of concentration in 1,4-dioxane and tetrahydofuran systems.

  10. DFT study of adsorption and dissociation of thiophene molecules on Ni(1 1 0)

    Science.gov (United States)

    Morin, C.; Eichler, A.; Hirschl, R.; Sautet, P.; Hafner, J.

    2003-08-01

    The different adsorption possibilities of thiophene (C 4H 4S) on the Ni(1 1 0) surface have been studied using first principle local-density-functional calculations, with the Vienna ab initio simulation package, which is based on a plane wave basis set and projector augmented wave potentials. For each configuration, a geometric optimisation has been performed. A detailed analysis of the structural and electronic properties of the molecule and the surface in the most stable conformations is presented, showing the combined roles of the molecular distortion and the interactions between the molecule and the surface. Three structures with comparatively large adsorption energies are identified, all with the molecule plane parallel to the surface. Starting from these stabilised structures, various scenarios for the desulfurisation process have been envisaged. While, for the most stable structure, the formation of an adsorbed thiol is an activated process, with an energetic barrier of 0.70 eV, the two structures which are just a bit less stable can dissociate to a C 4H 4 species and a sulfur atom with barriers as low as 0.07 eV. A description of the different transition states and a kinetic analysis of the desulfurisation reaction is also presented.

  11. Thermodynamic behavior of poly(3-alkyl thiophene) blends: Equilibrium cocrystal formation and phase segregation.

    Science.gov (United States)

    Pal, Susmita; Nandi, Arun K

    2005-02-24

    The equilibrium cocrystal formation of poly(3-alkyl thiophene) (P3AT) blends has been studied by isothermal cocrystallization in a differential scanning calorimeter (DSC-7). The equilibrium melting points (T(m)0) of the cocrystals are measured using the Hoffman-Weeks extrapolation procedure. The equilibrium phase diagrams are of three different types: (a) concave upward, (b) linear, and (c) linear with phase separation at higher content of lower melting component. The phase diagram nature depends on the regioregularity difference and also on the difference in the number of carbon atoms in the pendent alkyl group of the components. The origin of biphasic nature of type "c" phase diagram has been explored from the glass transition temperature (Tg) measurement using a dynamic mechanical analyzer. The biphasic compositions show two glass transition temperatures (Tg) as well as two beta transition temperatures (T beta). The T(g)s of phase-separated regions correspond to almost the component values but the T(beta)s correspond to that of a lower (T beta) component value, and the other is higher than that of the higher (T beta) component value. Possible reasons are discussed from the interchain lamella thickness in the P3AT blends and molecular modeling using molecular mechanics program.

  12. Adsorption kinetics and dynamics of small organic molecules on a silica wafer: Butane, pentane, nonane, thiophene, and methanol adsorption on SiO2/Si(1 1 1)

    International Nuclear Information System (INIS)

    Funk, S.; Goering, J.; Burghaus, U.

    2008-01-01

    The adsorption kinetics (by thermal desorption spectroscopy) and adsorption dynamics (by molecular beam scattering) have been determined for a number of alkanes, methanol, thiophene, and water on a silica wafer-SiO 2 /Si(1 1 1). No indications for bond activation were present, i.e., all probe molecules adsorb molecularly obeying 1st order kinetics. The coverage-dependent heat of adsorption has been determined accordingly. The adsorption dynamics are precursor-mediated with Kisliuk-like shapes of the adsorption probabilities at low impact energies and adsorbate-assisted adsorption at large impact energies

  13. Oxidative desulfurization of benzothiophene and thiophene with WOx/ZrO2 catalysts: effect of calcination temperature of catalysts.

    Science.gov (United States)

    Hasan, Zubair; Jeon, Jaewoo; Jhung, Sung Hwa

    2012-02-29

    Oxidative desulfurization (ODS) of model fuel containing benzothiophene (BT) or thiophene (Th) has been carried out with WO(x)/ZrO2 catalyst, which was calcined at various temperatures. Based on the conversion of BT in the model fuel, it can be shown that the optimum calcination temperature of WOx/ZrO2 catalyst is around 700 °C. The most active catalyst is composed of tetragonal zirconia (ZrO2) with well dispersed polyoxotungstate species and it is necessary to minimize the contents of the crystalline WO3 and monoclinic ZrO2 for a high BT conversion. The oxidation rate was interpreted with the first-order kinetics, and it demonstrated the importance of electron density since the kinetic constant for BT was higher than that for Th even though the BT is larger than Th in size. A WOx/ZrO2 catalyst, treated suitably, can be used as a reusable active catalyst in the ODS. Copyright © 2012 Elsevier B.V. All rights reserved.

  14. The preparation of Ag-BiVO4 metal composite oxides and its application in efficient photocatalytic oxidative thiophene

    Science.gov (United States)

    Gao, Xiao-Ming; Fu, Feng; Zhang, Li-Ping; Li, Wen-Hong

    2013-06-01

    A series of Ag-BiVO4 photocatalysts was synthesized by the hydrothemal synthesis method for different pH values. A strong correlation was found among the prepared processing, structure and property of the samples. With increasing pH value from 5 to 9, the crystallinity increases and the as-prepared Ag-BiVO4 sample gradually disappeared from the nanostructures. The light absorption became higher in the UV and visible range, accompanied by a bathochromic shift of the absorption edge. The competitive relations between crystallinity and surface area affecting photocatalytic activity were also discussed. Photocatalytic desulfurization on the as-prepared Ag-BiVO4 samples using thiophene dissolved in n-octane as a model organosulfur compound was performed. It showed that the photocatalytic desulfurization on the as-prepared Ag-BiVO4 sample at pH=7 can be up to 95%, which existed as various size particles and had significant high surface area of 13.768 m2 g-1.

  15. Supercritical gas extracts from low-quality coals. On the search of new precursors for carbon materials

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, Roberto; Arenillas, Ana; Rubiera, Fernando; Moinelo, Sabino R. [Instituto Nacional del Carbon INCAR, CSIC, Apartado 73, 33080, Oviedo (Spain)

    2004-11-25

    This paper studies the chemical composition of several supercritical gas (SCG) extracts and its influence on the thermal behaviour under carbonisation conditions. The extracts were obtained from a Spanish lignite (Mequinenza), a low-quality coal from the point of view of energy applications. The lignite was treated with toluene, ethanol (EtOH) and tetrahydrofuran (THF) as solvents under different supercritical temperature and pressure conditions. The extracts display high aliphatic nature and enhanced concentrations of oxygen functional groups, aided by the contribution of hydrogenation and oxygen incorporation reactions occurring in the SCG extraction with EtOH and THF. Thiophenic compounds are also present in great concentrations derived from the exceptionally high organic sulphur content of the parent coal. The carbonisation of the extracts renders anisotropic material with fine mosaic texture, as a consequence of the significant thermal reactivity inferred by the aliphatic and oxygenated groups. The size of the mosaic increases with the temperature of the SCG extraction and varies with the supercritical solvent in the order: toluene

  16. Biodegradation of methyl tert-butyl ether by Kocuria sp.

    Directory of Open Access Journals (Sweden)

    Kiković Dragan D.

    2012-01-01

    Full Text Available Methyl tert-butyl ether (MTBE has been used to replace the toxic compounds from gasoline and to reduce emission of air pollutants. Due to its intensive use, MTBE has become one of the most important environment pollutants. The aim of this paper is isolation and identification of the bacteria from wastewater sample of “HIP Petrohemija” Pančevo (Serbia, capable of MTBE biodegradation. The results of the investigation showed that only the bacterial isolate 27/1 was capable of growth on MTBE. The result of sequence analyzes of 16S rDNA showed that this bacterial isolate belongs to the Kocuria sp. After the incubation period of 86 days, the degradation rates of initial MTBE concentration of 25 and 125 μg/ml were 55 and 36%, respectively. These results indicated that bacteria Kocuria sp. is successfully adapted on MTBE and can be potentially used in bioremediation of soils and waters contaminated with MTBE.

  17. Observation on the biodegradation and bioremediation potential of methyl t-butyl ether

    International Nuclear Information System (INIS)

    Salanitro, J.; Wisniewski, H.; McAllister, P.

    1995-01-01

    There have been few reports documenting evidence for the biodegradation of the fuel oxygenate alkyl ether, methyl t-butyl ether (MTBE) in groundwater, soils, and biosludges. Partial (or complete) microbial breakdown of MTBE has been observed in an anaerobic subsoil, a river sediment under methanogenic conditions, a cyclohexane-degrading bacterial consortium and a pure culture of the methylotroph, Methylisnus trichosporium OB3b. An aerobic bacterial enrichment (BC-1) isolated from an industrial transient (non-accumulating) metabolic intermediate. The studies suggest that MTBE is cleaved by BC-1 to TBA which is then metabolized via isopropanol and acetone. There is little information on the occurrence of indigenous MTBE-degraders in groundwater, soils and activated sludges. Preliminary evidence has been obtained, however, from a marketing terminal groundwater site that naturally-occurring MTBE-degraders are present in some monitoring wells. Microcosm experiments with groundwater from this aquifer show that MTBE is aerobically degraded (no TBA formed) with a first-order decay rate (0.31/day) similar to BTEX. Also, MTBE did not inhibit the intrinsic biodegradation potential of BTEX in groundwater microcosms. In summary, the data presented indicate that MTBE biodegradation has been observed in some environmental media. Further work is needed to assess the feasibility of using indigenous or derived aerobic and anaerobic MTBE-degrading cultures for treating fuel ethers in groundwaters or wastewater with in-situ or ex-situ bioremediation technologies

  18. Inactivation of Cytochrome P450 (P450) 3A4 but not P450 3A5 by OSI-930, a Thiophene-Containing Anticancer DrugS⃞

    Science.gov (United States)

    Lin, Hsia-lien; Zhang, Haoming; Medower, Christine; Johnson, William W.

    2011-01-01

    An investigational anticancer agent that contains a thiophene moiety, 3-[(quinolin-4-ylmethyl)-amino]-N-[4-trifluoromethox)phenyl] thiophene-2-carboxamide (OSI-930), was tested to investigate its ability to modulate the activities of several cytochrome P450 enzymes. Results showed that OSI-930 inactivated purified, recombinant cytochrome P450 (P450) 3A4 in the reconstituted system in a mechanism-based manner. The inactivation was dependent on cytochrome b5 and required NADPH. Catalase did not protect against the inactivation. No inactivation was observed in studies with human 2B6, 2D6, or 3A5 either in the presence or in the absence of b5. The inactivation of 3A4 by OSI-930 was time- and concentration-dependent. The inactivation of the 7-benzyloxy-4-(trifluoromethyl)coumarin catalytic activity of 3A4 was characterized by a KI of 24 μM and a kinact of 0.04 min−1. This KI is significantly greater than the clinical OSI-930 Cmax of 1.7 μM at the maximum tolerated dose, indicating that clinical drug interactions of OSI-930 via this pathway are not likely. Spectral analysis of the inactivated protein indicated that the decrease in the reduced CO spectrum at 450 nm was comparable to the amount of inactivation, thereby suggesting that the inactivation was primarily due to modification of the heme. High-pressure liquid chromatography (HPLC) analysis with detection at 400 nm showed a loss of heme comparable to the activity loss, but a modified heme was not detected. This result suggests either that the heme must have been modified enough so as not to be observed in a HPLC chromatograph or, possibly, that it was destroyed. The partition ratio for the inactivation of P450 3A4 was approximately 23, suggesting that this P450 3A4-mediated pathway occurs with approximately 4% frequency during the metabolism of OSI-930. Modeling studies on the binding of OSI-930 to the active site of the P450 3A4 indicated that OSI-930 would be oriented properly in the active site for oxidation

  19. Cyclopentadienyl complexes of uranium(IV) chlorides. Crystal structures of trichloro(eta5-cyclopentadienyl)bis(triphenylphosphine oxide)uranium(IV) tetrahydrofuran solvate and of trichloro(eta5-cyclopentadienyl)bis(hexamethylphosphoramide)uranium(IV)

    International Nuclear Information System (INIS)

    Bagnall, K.W.; De Paoli, G.

    1984-01-01

    The crystal and molecular structures of [U(cp)Cl 3 (PPh 3 O) 2 ].thf (thf = tetrahydrofuran) (1) and [U(cp)Cl 3 (P(NMe 2 ) 3 O) 2 ] (cp = eta 5 -cyclopentadienyl) (2) have been determined from three-dimensional X-ray diffraction data. The results are presented. In both compounds the uranium atom is octahedrally co-ordinated with the two neutral ligands [PPh 3 O and P(NMe 2 ) 3 O] in cis positions; the chlorine atoms are in the mer arrangement and the cyclopentadienyl group is trans to one neutral ligand. The appearance of cis octahedral geometry in complexes of the type [U(cp)Cl 3 L 2 ] is discussed in terms of the operation of a possible trans effect. (author)

  20. Diphenylphenoxy-Thiophene-PDI Dimers as Acceptors for OPV Applications with Open Circuit Voltage Approaching 1 Volt

    Directory of Open Access Journals (Sweden)

    Caterina Stenta

    2018-03-01

    Full Text Available Two new perylenediimides (PDIs have been developed for use as electron acceptors in solution-processed bulk heterojunction solar cells. The compounds were designed to exhibit maximal solubility in organic solvents, and reduced aggregation in the solid state. In order to achieve this, diphenylphenoxy groups were used to functionalize a monomeric PDI core, and two PDI dimers were bridged with either one or two thiophene units. In photovoltaic devices prepared using PDI dimers and a monomer in conjunction with PTB7, it was found that the formation of crystalline domains in either the acceptor or donor was completely suppressed. Atomic force microscopy, X-ray diffraction, charge carrier mobility measurements and recombination kinetics studies all suggest that the lack of crystallinity in the active layer induces a significant drop in electron mobility. Significant surface recombination losses associated with a lack of segregation in the material were also identified as a significant loss mechanism. Finally, the monomeric PDI was found to have sub-optimum LUMO energy matching the cathode contact, thus limiting charge carrier extraction. Despite these setbacks, all PDIs produced high open circuit voltages, reaching almost 1 V in one particular case.

  1. QSAR models for thiophene and imidazopyridine derivatives inhibitors of the Polo-Like Kinase 1.

    Science.gov (United States)

    Comelli, Nieves C; Duchowicz, Pablo R; Castro, Eduardo A

    2014-10-01

    The inhibitory activity of 103 thiophene and 33 imidazopyridine derivatives against Polo-Like Kinase 1 (PLK1) expressed as pIC50 (-logIC50) was predicted by QSAR modeling. Multivariate linear regression (MLR) was employed to model the relationship between 0D and 3D molecular descriptors and biological activities of molecules using the replacement method (MR) as variable selection tool. The 136 compounds were separated into several training and test sets. Two splitting approaches, distribution of biological data and structural diversity, and the statistical experimental design procedure D-optimal distance were applied to the dataset. The significance of the training set models was confirmed by statistically higher values of the internal leave one out cross-validated coefficient of determination (Q2) and external predictive coefficient of determination for the test set (Rtest2). The model developed from a training set, obtained with the D-optimal distance protocol and using 3D descriptor space along with activity values, separated chemical features that allowed to distinguish high and low pIC50 values reasonably well. Then, we verified that such model was sufficient to reliably and accurately predict the activity of external diverse structures. The model robustness was properly characterized by means of standard procedures and their applicability domain (AD) was analyzed by leverage method. Copyright © 2014 Elsevier B.V. All rights reserved.

  2. Selective adsorption of thiophene and 1-benzothiophene on metal-ion-exchanged zeolites in organic medium.

    Science.gov (United States)

    Xue, Mei; Chitrakar, Ramesh; Sakane, Kohji; Hirotsu, Takahiro; Ooi, Kenta; Yoshimura, Yuji; Feng, Qi; Sumida, Naoto

    2005-05-15

    Adsorption of the organic sulfur compounds thiophene (TP) and 1-benzothiophene (1-BTP) in an organic model solution of hydrodesulfurizated gasoline (heptane with 1 wt% toluene and 0.156 mM (5 ppmw as sulfur) TP or 1-BTP) was studied by a batch method at 80 degrees C using metal-ion-exchanged Y-zeolites. Although NaY-zeolite or its acid-treated material rarely adsorbed the organic sulfur compounds, NaY-zeolites exchanged with Ag+, Cu2+, and Ce3+ ions and NH(4)Y-zeolites exchanged with Ce3+ ions showed markedly high adsorptive capacities for TP and 1-BTP. The sulfur uptake increased in the order CuY-zeolite(Na)

  3. QSAR, molecular docking studies of thiophene and imidazopyridine derivatives as polo-like kinase 1 inhibitors

    Science.gov (United States)

    Cao, Shandong

    2012-08-01

    The purpose of the present study was to develop in silico models allowing for a reliable prediction of polo-like kinase inhibitors based on a large diverse dataset of 136 compounds. As an effective method, quantitative structure activity relationship (QSAR) was applied using the comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA). The proposed QSAR models showed reasonable predictivity of thiophene analogs (Rcv2=0.533, Rpred2=0.845) and included four molecular descriptors, namely IC3, RDF075m, Mor02m and R4e+. The optimal model for imidazopyridine derivatives (Rcv2=0.776, Rpred2=0.876) was shown to perform good in prediction accuracy, using GATS2m and BEHe1 descriptors. Analysis of the contour maps helped to identify structural requirements for the inhibitors and served as a basis for the design of the next generation of the inhibitor analogues. Docking studies were also employed to position the inhibitors into the polo-like kinase active site to determine the most probable binding mode. These studies may help to understand the factors influencing the binding affinity of chemicals and to develop alternative methods for prescreening and designing of polo-like kinase inhibitors.

  4. Determination of Methyl tert-Butyl Ether and tert-Butyl Alcohol in Water by Solid-Phase Microextraction/Head Space Analysis in Comparison to EPA Method 5030/8260B

    Energy Technology Data Exchange (ETDEWEB)

    Oh, Keun-Chan; Stringfellow, William T.

    2003-10-02

    Methyl tert-butyl ether (MTBE) is now one of the most common groundwater contaminants in the United States. Groundwater contaminated with MTBE is also likely to be contaminated with tert-butyl alcohol (TBA), because TBA is a component of commercial grade MTBE, TBA can also be used as a fuel oxygenate, and TBA is a biodegradation product of MTBE. In California, MTBE is subject to reporting at concentrations greater than 3 {micro}g/L. TBA is classified as a ''contaminant of current interest'' and has a drinking water action level of 12 {micro}g/L. In this paper, we describe the development and optimization of a simple, automated solid phase microextraction (SPME) method for the analysis of MTBE and TBA in water and demonstrate the applicability of this method for monitoring MTBE and TBA contamination in groundwater, drinking water, and surface water. In this method, the headspace (HS) of a water sample is extracted with a carboxen/polydimethylsiloxane SPME fiber, the MTBE and TBA are desorbed into a gas chromatograph (GC), and detected using mass spectrometry (MS). The method is optimized for the routine analysis of MTBE and TBA with a level of quantitation of 0.3 {micro}g/L and 4 {micro}g/L, respectively, in water. MTBE quantitation was linear for over two orders of concentration (0.3 {micro}g/L -80 {micro}g/L). TBA was found to be linear within the range of 4 {micro}g/L-7,900 {micro}g/L. The lower level of detection for MTBE is 0.03 {micro}g/L using this method. This SPME method using headspace extraction was found to be advantageous over SPME methods requiring immersion of the fiber into the water samples, because it prolonged the life of the fiber by up to 400 sample analyses. This is the first time headspace extraction SPME has been shown to be applicable to the measurement of both MTBE and TBA at concentrations below regulatory action levels. This method was compared with the certified EPA Method 5030/8260B (purge-and-trap/GC/MS) using split

  5. Carcinogenicity of methyl-tertiary butyl ether in gasoline.

    Science.gov (United States)

    Mehlman, Myron A

    2002-12-01

    Methyl tertiary butyl ether (MTBE) was added to gasoline on a nationwide scale in 1992 without prior testing of adverse, toxic, or carcinogenic effects. Since that time, numerous reports have appeared describing adverse health effects of individuals exposed to MTBE, both from inhalation of fumes in the workplace and while pumping gasoline. Leakage of MTBE, a highly water-soluble compound, from underground storage tanks has led to contamination of the water supply in many areas of the United States. Legislation has been passed by many states to prohibit the addition of MTBE to gasoline. The addition of MTBE to gasoline has not accomplished its stated goal of decreasing air pollution, and it has posed serious health risks to a large portion of the population, particularly the elderly and those with respiratory problems, asthma, and skin sensitivity. Reports of animal studies of carcinogenicity of MTBE began to appear in the 1990s, prior to the widespread introduction of MTBE into gasoline. These reports were largely ignored. In ensuing years, further studies have shown that MTBE causes various types of malignant tumors in mice and rats. The National Toxicology Program (NTP) Board of Scientific Counselors' Report on Carcinogens Subcommittee met in December 1998 to consider listing MTBE as "reasonably anticipated to be a human carcinogen." In spite of recommendations from Dr. Bailer, the primary reviewer, and other scientists on the committee, the motion to list MTBE in the report was defeated by a six to five vote, with one abstention. On the basis of animal studies, it is widely accepted that if a chemical is carcinogenic in appropriate laboratory animal test systems, it must be treated as though it were carcinogenic in humans. In the face of compelling evidence, NTP Committee members who voted not to list MTBE as "reasonably anticipated to be a human carcinogen" did a disservice to the general public; this action may cause needless exposure of many to health risks

  6. Kinetics and Photodegradation Study of Aqueous Methyl tert-Butyl Ether Using Zinc Oxide: The Effect of Particle Size

    Directory of Open Access Journals (Sweden)

    Zaki S. Seddigi

    2013-01-01

    Full Text Available Zinc oxide of different average particle sizes 25 nm, 59 nm, and 421 nm as applied in the photodegradation of MTBE. This study was carried out in a batch photoreactor having a high pressure mercury lamp. Zinc oxide of particle size of 421 nm was found to be the most effective in degrading MTBE in an aqueous solution. On using this type of ZnO in a solution of 100 ppm MTBE, the concentration of MTBE has decreased to 5.1 ppm after a period of five hours. The kinetics of the photocatalytic degradation of MTBE was found to be a first order reaction.

  7. Study of liver function and expression of some detoxification genes ...

    African Journals Online (AJOL)

    Ahmad Ali Badr

    2015-10-19

    Oct 19, 2015 ... In this study we investigate the effect(s) of MTBE on liver function indices and ... Methyl-tertiary butyl ether (MTBE), a well known gasoline oxygenate, is added to ..... ether (MTBE) in CD-1 mice and F-344 rats. J Appl Toxicol.

  8. Biodegradation of Methyl tert-Butyl Ether by Co-Metabolism with a Pseudomonas sp. Strain

    Directory of Open Access Journals (Sweden)

    Shanshan Li

    2016-09-01

    Full Text Available Co-metabolic bioremediation is supposed to be an impressive and promising approach in the elimination technology of methyl tert-butyl ether (MTBE, which was found to be a common pollutant worldwide in the ground or underground water in recent years. In this paper, bacterial strain DZ13 (which can co-metabolically degrade MTBE was isolated and named as Pseudomonas sp. DZ13 based on the result of 16S rRNA gene sequencing analysis. Strain DZ13 could grow on n-alkanes (C5-C8, accompanied with the co-metabolic degradation of MTBE. Diverse n-alkanes with different carbon number showed a significant influence on the degradation rate of MTBE and accumulation of tert-butyl alcohol (TBA. When Pseudomonas sp. DZ13 co-metabolically degraded MTBE with n-pentane as the growth substrate, a higher MTBE-degrading rate (Vmax = 38.1 nmol/min/mgprotein, Ks = 6.8 mmol/L and lower TBA-accumulation was observed. In the continuous degradation experiment, the removal efficiency of MTBE by Pseudomonas sp. Strain DZ13 did not show an obvious decrease after five times of continuous addition.

  9. Photophysical, electrochemical and photovoltaic properties of thiophene-containing arylene-ethynylene/arylene-vinylene polymers

    International Nuclear Information System (INIS)

    Egbe, Daniel Ayuk Mbi; Huong Nguyen, Le; Muehlbacher, David; Hoppe, Harald; Schmidtke, Kathy; Serdar Sariciftci, Niyazi

    2006-01-01

    This work reports the properties of two types of thiophene-containing poly(arylene-ethynylene)-alt-poly(arylene-vinylene)s polymers, whose repeating units (-Ph-C≡C-Th-CH=CH-Ph-CH=CH-) n , 1, and (-Th-C≡C-Ph-C≡C-Th-CH=CH-Ph-CH=CH-) n , 2, consist respectively of a 1 : 2 and a 2 : 2 ratio of -C≡C-/-CH=CH- moieties. Although similar electrochemical data (HOMO: - 5.43 eV, LUMO: ∼- 3.15 eV, E g ec = 2.28 eV) as well as identical thin film absorption behaviour (λ a = 501 nm, E g opt = 2.10 eV) were obtained for both types of materials, significant differences in their thin film photoluminescence behaviour and photovoltaic properties were observed. While polymer 1 shows a fluorescence maximum at λ e = 568 nm (with a fluorescence quantum yield of Φ f = 7%), a total fluorescence quenching was observed in 2. Solar cells (set up: ITO/PEDOT : PSS/active layer/LiF/Al; active layer consisting of 1 or 2 as donor and PCBM as acceptor in a 1 : 3 ratio by weight) designed from 1 (best cell: V OC = 900 mV, I SC = 2.51 mA.cm -2 , FF = 53.7%, η AM1.5 = 1.21%) show far better photovoltaic performance than those from 2 (best cell: V OC = 500 mV, I SC = 1.44 mA.cm -2 , FF = 37.1%, η AM1.5 = 0.27%)

  10. On interfacial properties of tetrahydrofuran: Atomistic and coarse-grained models from molecular dynamics simulation

    Energy Technology Data Exchange (ETDEWEB)

    Garrido, J. M. [Departamento de Ingeniería Química, Universidad de Concepción, POB 160-C Concepción (Chile); Algaba, J.; Blas, F. J., E-mail: felipe@uhu.es [Laboratorio de Simulación Molecular y Química Computacional, CIQSO-Centro de Investigación en Química Sostenible and Departamento de Física Aplicada, Universidad de Huelva, 21007 Huelva (Spain); Míguez, J. M. [Laboratoire des Fluides Complexes et Leurs Reservoirs, Université de Pau et des Pays de l’Adour, CNRS, TOTAL–UMR 5150, Avenue de l’Université, B.P. 1155, Pau F-64013 (France); Departamento de Física Aplicada, Universidade de Vigo, E36310 Vigo (Spain); Mendiboure, B. [Laboratoire des Fluides Complexes et Leurs Reservoirs, Université de Pau et des Pays de l’Adour, CNRS, TOTAL–UMR 5150, Avenue de l’Université, B.P. 1155, Pau F-64013 (France); Moreno-Ventas Bravo, A. I. [Laboratorio de Simulación Molecular y Química Computacional, CIQSO-Centro de Investigación en Química Sostenible and Departamento de Geología, Universidad de Huelva, 21007 Huelva (Spain); Piñeiro, M. M. [Departamento de Física Aplicada, Universidade de Vigo, E36310 Vigo (Spain)

    2016-04-14

    We have determined the interfacial properties of tetrahydrofuran (THF) from direct simulation of the vapor-liquid interface. The molecules are modeled using six different molecular models, three of them based on the united-atom approach and the other three based on a coarse-grained (CG) approach. In the first case, THF is modeled using the transferable parameters potential functions approach proposed by Chandrasekhar and Jorgensen [J. Chem. Phys. 77, 5073 (1982)] and a new parametrization of the TraPPE force fields for cyclic alkanes and ethers [S. J. Keasler et al., J. Phys. Chem. B 115, 11234 (2012)]. In both cases, dispersive and coulombic intermolecular interactions are explicitly taken into account. In the second case, THF is modeled as a single sphere, a diatomic molecule, and a ring formed from three Mie monomers according to the SAFT-γ Mie top-down approach [V. Papaioannou et al., J. Chem. Phys. 140, 054107 (2014)]. Simulations were performed in the molecular dynamics canonical ensemble and the vapor-liquid surface tension is evaluated from the normal and tangential components of the pressure tensor along the simulation box. In addition to the surface tension, we have also obtained density profiles, coexistence densities, critical temperature, density, and pressure, and interfacial thickness as functions of temperature, paying special attention to the comparison between the estimations obtained from different models and literature experimental data. The simulation results obtained from the three CG models as described by the SAFT-γ Mie approach are able to predict accurately the vapor-liquid phase envelope of THF, in excellent agreement with estimations obtained from TraPPE model and experimental data in the whole range of coexistence. However, Chandrasekhar and Jorgensen model presents significant deviations from experimental results. We also compare the predictions for surface tension as obtained from simulation results for all the models with

  11. On interfacial properties of tetrahydrofuran: Atomistic and coarse-grained models from molecular dynamics simulation

    International Nuclear Information System (INIS)

    Garrido, J. M.; Algaba, J.; Blas, F. J.; Míguez, J. M.; Mendiboure, B.; Moreno-Ventas Bravo, A. I.; Piñeiro, M. M.

    2016-01-01

    We have determined the interfacial properties of tetrahydrofuran (THF) from direct simulation of the vapor-liquid interface. The molecules are modeled using six different molecular models, three of them based on the united-atom approach and the other three based on a coarse-grained (CG) approach. In the first case, THF is modeled using the transferable parameters potential functions approach proposed by Chandrasekhar and Jorgensen [J. Chem. Phys. 77, 5073 (1982)] and a new parametrization of the TraPPE force fields for cyclic alkanes and ethers [S. J. Keasler et al., J. Phys. Chem. B 115, 11234 (2012)]. In both cases, dispersive and coulombic intermolecular interactions are explicitly taken into account. In the second case, THF is modeled as a single sphere, a diatomic molecule, and a ring formed from three Mie monomers according to the SAFT-γ Mie top-down approach [V. Papaioannou et al., J. Chem. Phys. 140, 054107 (2014)]. Simulations were performed in the molecular dynamics canonical ensemble and the vapor-liquid surface tension is evaluated from the normal and tangential components of the pressure tensor along the simulation box. In addition to the surface tension, we have also obtained density profiles, coexistence densities, critical temperature, density, and pressure, and interfacial thickness as functions of temperature, paying special attention to the comparison between the estimations obtained from different models and literature experimental data. The simulation results obtained from the three CG models as described by the SAFT-γ Mie approach are able to predict accurately the vapor-liquid phase envelope of THF, in excellent agreement with estimations obtained from TraPPE model and experimental data in the whole range of coexistence. However, Chandrasekhar and Jorgensen model presents significant deviations from experimental results. We also compare the predictions for surface tension as obtained from simulation results for all the models with

  12. ]thiophene-Based Nonfullerene Acceptor with High Crystallinity Exhibiting Single Junction Solar Cell Efficiencies Greater than 13% with Low Voltage Losses

    KAUST Repository

    Fei, Zhuping

    2018-01-10

    A new synthetic route, to prepare an alkylated indacenodithieno[3,2-b]thiophene-based nonfullerene acceptor (C8-ITIC), is reported. Compared to the reported ITIC with phenylalkyl side chains, the new acceptor C8-ITIC exhibits a reduction in the optical band gap, higher absorptivity, and an increased propensity to crystallize. Accordingly, blends with the donor polymer PBDB-T exhibit a power conversion efficiency (PCE) up to 12.4%. Further improvements in efficiency are found upon backbone fluorination of the donor polymer to afford the novel material PFBDB-T. The resulting blend with C8-ITIC shows an impressive PCE up to 13.2% as a result of the higher open-circuit voltage. Electroluminescence studies demonstrate that backbone fluorination reduces the energy loss of the blends, with PFBDB-T/C8-ITIC-based cells exhibiting a small energy loss of 0.6 eV combined with a high JSC of 19.6 mA cm-2 .

  13. Reflectance study on the metal-insulator transition driven by crystallinity change in poly(3,4-ethylenedioxy thiophene)/poly(styrenesulfonate) films

    International Nuclear Information System (INIS)

    Cho, Shinuk; Park, Sungheum; Lee, Kwanghee

    2005-01-01

    We report optical reflectance, R(ω), studies on free-standing films of poly(3,4-ethylene dioxy thiophene)/poly(style ne sulfonate) (PEDOT-PSS) measured over a range from 0.02 - 5.0 eV. When the PEDOT-PSS films were prepared at an elevated temperature of 60 .deg. C, the films exhibit an increased dc-conductivity (σ dc ∼ 104 S/cm) and an optical conductivity, σ(ω), in the intraband transitions below 1.0 eV as compared with the films prepared at room temperature (σ dc ∼ 47 S/cm). Detailed analysis of σ(ω) in terms of the 'localization-modified Drude (LMD) model' demonstrated that the heat-treated PEDOT-PSS was a disordered metal near the metal-insulator transition (MIT) while the as-grown films could be better described as a Fermi glass on the insulating side of MIT. The heat-annealing process increased the degree of crystallinity of the films, thereby inducing a MIT near the critical limit.

  14. ]thiophene-Based Nonfullerene Acceptor with High Crystallinity Exhibiting Single Junction Solar Cell Efficiencies Greater than 13% with Low Voltage Losses

    KAUST Repository

    Fei, Zhuping; Eisner, Flurin D.; Jiao, Xuechen; Azzouzi, Mohammed; Rö hr, Jason A.; Han, Yang; Shahid, Munazza; Chesman, Anthony S. R.; Easton, Christopher D.; McNeill, Christopher R.; Anthopoulos, Thomas D.; Nelson, Jenny; Heeney, Martin

    2018-01-01

    A new synthetic route, to prepare an alkylated indacenodithieno[3,2-b]thiophene-based nonfullerene acceptor (C8-ITIC), is reported. Compared to the reported ITIC with phenylalkyl side chains, the new acceptor C8-ITIC exhibits a reduction in the optical band gap, higher absorptivity, and an increased propensity to crystallize. Accordingly, blends with the donor polymer PBDB-T exhibit a power conversion efficiency (PCE) up to 12.4%. Further improvements in efficiency are found upon backbone fluorination of the donor polymer to afford the novel material PFBDB-T. The resulting blend with C8-ITIC shows an impressive PCE up to 13.2% as a result of the higher open-circuit voltage. Electroluminescence studies demonstrate that backbone fluorination reduces the energy loss of the blends, with PFBDB-T/C8-ITIC-based cells exhibiting a small energy loss of 0.6 eV combined with a high JSC of 19.6 mA cm-2 .

  15. Nephelauxetic and hypersensitive nature of neodymium(III) complexes with α-pyridyl-thiosemicarbazide and its furfural-2-aldehyde and thiophene-2-aldehyde derivatives

    International Nuclear Information System (INIS)

    Jain, C.L.; Mundley, P.N.; Khandelwal, B.E.

    1986-01-01

    A new series of octahedral Nd(III) complexes with recently synthesised α-pyridylthiosemicarbazide (C 6 H 8 N 4 S or 'PT'), N-(α-pyridyl)furfural-2-aldehyde-thiosemicarbazone (C 11 H 10 N 4 SO or 'PFT') and N-(α-pyridyl)thiophene-2-aldehyde-thiosemicarbazone (C 11 H 10 N 4 S 2 or 'PTT'), have been isolated and characterised on the basis of their elemental analysis, magnetic and reflectance and ir spectral data revealing 'PT' as bidentate (pyridinic-N and thioketo-S) and 'PFT' and 'PTT' as tetradentate with pyridinic-N, thioketo-S, imine-N and furfuryl-O/thiophenyl-S as donor sites. Isolation and characterisation of Nd(III) complexes with 'PT', 'PFT' and 'PTT' and their nephelauxetic and hypersensitive nature are studied in order to evaluate the stereochemistry of the ligands around Nd(III) ion. (author). 12 refs., 2 tables

  16. p/n-Polarity of thiophene oligomers in photovoltaic cells: role of molecular vs. supramolecular properties.

    Science.gov (United States)

    Ghosh, Tanwistha; Gopal, Anesh; Saeki, Akinori; Seki, Shu; Nair, Vijayakumar C

    2015-04-28

    Molecular and supramolecular properties play key roles in the optoelectronic properties and photovoltaic performances of organic materials. In the present work, we show how small changes in the molecular structure affect such properties, which in turn control the intrinsic and fundamental properties such as the p/n-polarity of organic semiconductors in bulk-heterojunction solar cells. Herein, we designed and synthesized two acceptor-donor-acceptor type semiconducting thiophene oligomers end-functionalized with oxazolone/isoxazolone derivatives (OT1 and OT2 respectively). The HOMO-LUMO energy levels of both derivatives were found to be positioned in such a way that they can act as electron acceptors to P3HT and electron donors to PCBM. However, OT1 functions as a donor (with PCBM) and OT2 as an acceptor (with P3HT) in BHJ photovoltaic cells, and their reverse roles results in either no or poor performance of the cells. Detailed studies using UV-vis absorption and fluorescence spectroscopy, time-correlated single photon counting, UV-photoelectron spectroscopy, density functional theory calculations, X-ray diffraction, and thermal gravimetric analysis proved that both molecular and supramolecular properties contributed equally but in a contrasting manner to the abovementioned observation. The obtained results were further validated by flash-photolysis time-resolved microwave conductivity studies which showed an excellent correlation between the structure, property, and device performances of the materials.

  17. Photoluminescence properties of lanthanide-organic frameworks (LnOFs) with thiophene-2,5-dicarboxylate and acetate

    Energy Technology Data Exchange (ETDEWEB)

    Han, Jing; Wei, Qing; Xie, Gang; Chen, Sanping [Key Lab. of Synthetic and Natural Functional Molecule Chemistry of Ministry of Education, College of Chemistry and Materials Science, Northwest Univ., Xi' an, Shaanxi (China); Zhang, Sheng [Key Lab. of Synthetic and Natural Functional Molecule Chemistry of Ministry of Education, College of Chemistry and Materials Science, Northwest Univ., Xi' an, Shaanxi (China); College of Chemistry and Chemical Engineering, Baoji Univ. of Arts and Science, Baoji, Shaanxi (China)

    2017-07-17

    S-heterocyclic dicarboxylic acid, thiophene-2,5-dicarboxylic acid (H{sub 2}TDC), was employed to construct a series of lanthanide-organic frameworks (LnOFs) with coligand acetate, formulated as [Ln(TDC)(OAc)(H{sub 2}O)]{sub n} [Ln = Eu (1), Tb (2), Gd (3), Dy (4), Sm (5)] under hydrothermal conditions. Structure analysis reveals that 1-5 have dinuclear 3D metal organic frameworks (MOFs), in which TDC{sup 2-} and OAc{sup -} display (κ{sup 1}-κ{sup 1})-(κ{sup 1}-κ{sup 1})-μ{sub 4} and (κ{sup 2}-κ{sup 1})-μ{sub 2} coordination fashions, respectively. The dehydrated products of all compounds show high thermal stability above 410 C. As for 1, 2, 4, and 5, the photoluminescence analyses exhibit characteristic luminescence emission bands of the corresponding lanthanide ions in the visible region. In particular, compound 2 displays bright green luminescence in the solid state with {sup 5}D{sub 4} lifetime of 0.510 ms and relative high overall quantum yield of 16 %, based on an ideal energy gap between the lowest triplet state energy level of H{sub 2}TDC ligand and the {sup 5}D{sub 4} state energy level of Tb{sup 3+}. The energy transfer mechanisms in compounds 1 and 2 were also discussed. (copyright 2017 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  18. The preparation of Ag–BiVO{sub 4} metal composite oxides and its application in efficient photocatalytic oxidative thiophene

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Xiao-Ming, E-mail: dawn1026@163.com [Department of Chemistry and Chemical Engineering, Shaanxi Key Laboratory of Chemical Reaction Engineering, Yan' an University, Yan' an, Shaanxi 716000 (China); Department of Chemical Engineering, Northwest University, Xi' an, Shaanxi 710069 (China); Fu, Feng; Zhang, Li-Ping [Department of Chemistry and Chemical Engineering, Shaanxi Key Laboratory of Chemical Reaction Engineering, Yan' an University, Yan' an, Shaanxi 716000 (China); Li, Wen-Hong [Department of Chemical Engineering, Northwest University, Xi' an, Shaanxi 710069 (China)

    2013-06-15

    A series of Ag–BiVO{sub 4} photocatalysts was synthesized by the hydrothemal synthesis method for different pH values. A strong correlation was found among the prepared processing, structure and property of the samples. With increasing pH value from 5 to 9, the crystallinity increases and the as-prepared Ag–BiVO{sub 4} sample gradually disappeared from the nanostructures. The light absorption became higher in the UV and visible range, accompanied by a bathochromic shift of the absorption edge. The competitive relations between crystallinity and surface area affecting photocatalytic activity were also discussed. Photocatalytic desulfurization on the as-prepared Ag–BiVO{sub 4} samples using thiophene dissolved in n-octane as a model organosulfur compound was performed. It showed that the photocatalytic desulfurization on the as-prepared Ag–BiVO{sub 4} sample at pH=7 can be up to 95%, which existed as various size particles and had significant high surface area of 13.768 m{sup 2} g{sup −1}.

  19. Enhancement of methyl tert-butyl ether degradation by the addition of readily metabolizable organic substrates

    International Nuclear Information System (INIS)

    Chen Dongzhi; Chen Jianmeng; Zhong Weihong

    2009-01-01

    Supplements with readily metabolizable organic substrates were investigated to increase the biomass and enhance degradation of methyl tert-butyl ether (MTBE) due to the low biomass yield of MTBE which has been one of the factors for low-rate MTBE degradation. The influence of various organic substrates on the rate of aerobic degradation of methyl tert-butyl ether (MTBE) by Methylibium petroleiphilum PM1 was investigated, and only yeast extract (YE), beef extract and tryptone exhibited stimulatory effect. With the concentration of each substrate being 100 mg/L, the average MTBE removal rate could increase to 1.29, 1.20 and 1.04 mg/(L h), respectively, in comparison with 0.71 mg/(L h) when carried out in medium without addition. The stimulatory effects of YE addition, as well as induction period required by MTBE degradation, varied dramatically with the storage conditions, pre-culture medium and concentrations of the inoculums. The extent of stimulatory effects of YE might be closely related to the proportion of induction period in the total time of MTBE-degradation. The removal efficiency increased from about 50% to 90.5% with the addition of YE in a packed-bed reactor loaded with calcium alginate immobilized cells.

  20. APPLICATION OF E-COMMERCE IN LOCAL HOME SHOPPING AND ITS CONSEQUENCES ON ENERGY CONSUMPTION AND AIR POLLUTION REDUCTION

    Directory of Open Access Journals (Sweden)

    S. M. Tehrani and A. R. Karbassi

    2005-10-01

    Full Text Available Methyl Tert-Butyl Ether (MTBE is one of the ether oxygenates which its use has been increased within the last twenty years. This compound is produced from isobutylene and methanol reaction that is used as octane index enhancer and also increases dissolved oxygen in gasoline and decreases carbon monoxide emission in four phased motors because of better combustion of gasoline. High solubility in water (52 g/L, high vapor pressure (0.54 kg/cm3, low absorption to organic carbon of soil and presence of MTBE in the list of potentially-carcinogens of U.S EPA has made its use of great concern. The culture media used in this study was Mineral Salt Medium (MSM. The study lasted for 236 days and in three different concentrations of MTBE of 200, 5 and 0.8 mg/L. A control sample was also used to compare the results. This research studied the isolation methods of microbial consortium in the MTBE polluted soils in Tehran and Abadan petroleum refinery besides MTBE degradation. The results showed the capability of bacteria in consuming MTBE as carbon source. Final microbial isolation was performed with several microbial passages as well as keeping consortium in a certain amount of MTBE as the carbon source.