WorldWideScience

Sample records for thin section descriptions

  1. Descriptions of two thin sections from the glacial sediments exposed at Great Orton, Cumbria

    OpenAIRE

    Phillips, Emrys

    2007-01-01

    This report describes the micromorphology of a prepared sample of Quaternary glaciogenic sediment and a glacial erratic exposed near Great Orton, Cumbria, on the southern side of the Solway Firth. The work forms part of the Southern Scotland Project of the Geology and Landscape Northern Britain Programme. The first part of the report provides a detailed description of a single thin section of an unconsolidated, sandy, silty clay present near the base of the section. The remaind...

  2. Incomplete pulmonary fissures evaluated by volumetric thin-section CT: Semi-quantitative evaluation for small fissure gaps identification, description of prevalence and severity of fissural defects

    Energy Technology Data Exchange (ETDEWEB)

    Koenigkam-Santos, Marcel, E-mail: marcelk46@yahoo.com.br [Department of Diagnostic and Interventional Radiology, University of Heidelberg, Im Neuenheimer Feld 110, 69120 Heidelberg (Germany); Radiology Department, German Cancer Research Center (Deutsches Krebsforschungszentrum – DKFZ), Im Neuenheimer Feld 280, 69120 Heidelberg (Germany); Department of Radiology, University Hospital of the School of Medicine of Ribeirao Preto – University of Sao Paulo, Av. Bandeirantes 3900, Campus Universitario Monte Alegre, 14048900 Ribeirao Preto, SP (Brazil); Paula, Wagner Diniz de, E-mail: wdpaula@unb.br [Department of Diagnostic and Interventional Radiology, University of Heidelberg, Im Neuenheimer Feld 110, 69120 Heidelberg (Germany); Department of Radiology, University Hospital of the University of Brasilia, Brasilia, DF (Brazil); Owsijewitsch, Michael, E-mail: michael.owsijewitsch@med.uniheidelberg.de [Department of Diagnostic and Interventional Radiology, University of Heidelberg, Im Neuenheimer Feld 110, 69120 Heidelberg (Germany); Radiology Department, German Cancer Research Center (Deutsches Krebsforschungszentrum – DKFZ), Im Neuenheimer Feld 280, 69120 Heidelberg (Germany); Wielpütz, Mark Oliver, E-mail: mark.wielpuetz@med.uni-heidelberg.de [Department of Diagnostic and Interventional Radiology, University of Heidelberg, Im Neuenheimer Feld 110, 69120 Heidelberg (Germany); Radiology Department, German Cancer Research Center (Deutsches Krebsforschungszentrum – DKFZ), Im Neuenheimer Feld 280, 69120 Heidelberg (Germany); Gompelmann, Daniela, E-mail: daniela.gompelmann@thoraxklinik-heidelberg.de [Pneumology and Respiratory Medicine, Chest Clinic (Thoraxklinik) at University of Heidelberg, Amalienstr. 5, 69126 Heidelberg (Germany); Schlemmer, Heinz-Peter, E-mail: h.schlemmer@dkfz-heidelberg.de [Radiology Department, German Cancer Research Center (Deutsches Krebsforschungszentrum – DKFZ), Im Neuenheimer Feld 280, 69120 Heidelberg (Germany); and others

    2013-12-01

    Objective: To assess the interobserver agreement for a semi-quantitative evaluation of the interlobar fissures integrity in volumetric thin-section CT images, looking for more detailed information regarding fissural defects; and describe prevalence and severity of fissural defects between the different functional groups of subjects. Materials and methods: Volumetric scans of 247 individuals exposed to tobacco with different functional status (normal to severe COPD), were retrospectively and independently evaluated by 2 chest radiologists, with a consensual reading additionally with a third reader in disagreement cases. Right oblique (RO), right horizontal (RH) and left oblique fissures (LO) integrity was estimated using a 5% scale. GOLD classification was available for all subjects. Results: Interobserver agreement (weighted Kappa-index) for fissural categorization was 0.76, 0.70 and 0.75, for RO, RH and LO, respectively. Final evaluation found 81%, 89% and 50% of RO, RH and LO to be incomplete, with respective mean integrity of 80%, 58% and 80%. Small fissure gaps (<10%) were present in 30% of patients. Prevalence and severity of fissural defects were not different between the GOLD categories. Conclusions: A substantial agreement between readers was found in the analysis of interlobar fissures integrity. The semi-quantitative method allowed a detailed description of the fissural defects, information that can be important, for example, in endoscopic lung volume reduction therapies for emphysema. Small fissure gaps, overlooked in previous studies, were found in almost a third of the patients. A higher than previously described prevalence of fissural defects was described, but without significant differences among the distinct functional groups.

  3. Thin section casting program. Volume 2: Horizontal TSC (Thin-Section Casting) approach

    Science.gov (United States)

    1989-01-01

    In horizontal thin-section casting (HTSC), 1-inch-thick steel sections are produced at speeds up to 600 ipm or about 60 tons per hour per foot of width (tphf). Liquid steel is fed from the ladle, and flows through a specially designed tundish, then flows through a refractory feeding tube and nozzle, with approximately the same external dimensions as the cast section, into a near-horizontal rectangular mold whose all four sides are traveling in the same direction and speed as the steel casting. This report is the second of a six volume set on thin section casting. This volume covers the research on horizontal thin section casting (TSC).

  4. Thin-section CT of Cushing's disease

    International Nuclear Information System (INIS)

    Takahashi, Tatsuo; Kuwayama, Akio; Katoh, Tetsuo; Ichihara, Kaoru; Kageyama, Naoki; Nakamura, Koji.

    1983-01-01

    Using 1.5 mm contiguous sections with a GE CT/T 8800 scanner, we investigated the sellar regions of 22 cases of Cushing's diseases which had been diagnosed endocrinologically. Each sellar turcica was normal in size, and in only 5 cases were there significant findings on 2 mm-thick sellar-floor polytomography. Nine tumors appeared as regions of a hypodense area, and three tumors were diagnosed by indirect signs, for example, stalk deviation and diaphragmatic plane asymmetry. The other 10 cases, especially those previously operated on or irradiated, were diagnosed as falsely positive or negative. Because it is best of the microadenomas appear hypodense within the strongly contrast-enhanced anterior pituitary glands, it is better for scans to be obtained immediately after rapid intravenous contrast infusion. Hypodense areas of microadenomas are best demonstrated on direct coronal scans or reversed scans of 1.5 mm-thickness thin-slice sections. By these methods, microadenomas, if they are over 5-6 mm in diameter, can appear as hypodense. Sellar floor findings by means of thin-section CT were more sensitive than those of polytomography and had more advantages in local diagnosis. If the tumor were over 4 mm in diameter, local changes in the sellar floor could be demonstrated by thin-section CT, but by polytomography no changes in the sellar floor could be demonstrated until the tumor size reached 6 mm. (author)

  5. Thin Section Microscopy Applied to the Study of Archaeological Ceramics

    International Nuclear Information System (INIS)

    Riederer, J.

    2004-01-01

    For the characterization of archaeological ceramics, the study of thin sections under the polarizing microscope is a very efficient analytical technique. There are two properties of ceramics which can be analysed by thin sections, namely the mineralogical composition and the fabric. Both features show a considerable variety which permits a very detailed description of ceramic wares. With respect to the mineralogical composition, there is a wide variety of rock forming minerals, of heavy and ore minerals, fragments of stone, fossils, organic inclusions like straw or pieces of charcoal as well as artificial inclusions like slag or crushed pottery, which define with the temper of the pottery in much detail. The fabric also shows considerable differences in grain size, in the amount of temper, in the orientation of grains and other features, which provide further quantitative data on the properties of archaeological ceramics. From this information, the material can be well characterised, and conclusions as to the region of origin and the potter's techniques can often be drawn.

  6. Content Model Use and Development to Redeem Thin Section Records

    Science.gov (United States)

    Hills, D. J.

    2014-12-01

    The National Geothermal Data System (NGDS) is a catalog of documents and datasets that provide information about geothermal resources located primarily within the United States. The goal of NGDS is to make large quantities of geothermal-relevant geoscience data available to the public by creating a national, sustainable, distributed, and interoperable network of data providers. The Geological Survey of Alabama (GSA) has been a data provider in the initial phase of NGDS. One method by which NGDS facilitates interoperability is through the use of content models. Content models provide a schema (structure) for submitted data. Schemas dictate where and how data should be entered. Content models use templates that simplify data formatting to expedite use by data providers. These methodologies implemented by NGDS can extend beyond geothermal data to all geoscience data. The GSA, using the NGDS physical samples content model, has tested and refined a content model for thin sections and thin section photos. Countless thin sections have been taken from oil and gas well cores housed at the GSA, and many of those thin sections have related photomicrographs. Record keeping for these thin sections has been scattered at best, and it is critical to capture their metadata while the content creators are still available. A next step will be to register the GSA's thin sections with SESAR (System for Earth Sample Registration) and assign an IGSN (International Geo Sample Number) to each thin section. Additionally, the thin section records will be linked to the GSA's online record database. When complete, the GSA's thin sections will be more readily discoverable and have greater interoperability. Moving forward, the GSA is implementing use of NGDS-like content models and registration with SESAR and IGSN to improve collection maintenance and management of additional physical samples.

  7. Squalene aspiration pneumonia : thin-section CT and histopathologic findings

    International Nuclear Information System (INIS)

    Lee, Jin Seong; Gong, Gyung Yub; Lim, Tae Hwan

    1998-01-01

    The purpose of this study was to describe the thin-section computed tomography (CT) findings and histopathologic findings of squalene aspiration pneumonia. Thin-section CT scans were obtained from nine patients with proven exogenous lipoid pneumonia resulting from aspiration of squalene (derived from shark liver oil). The condition was diagnosed by biopsy (n=3), bronchoalveolar lavage(n=4), or sputum cytology and clinical history (n=2) of squalene use was confirmed in all patients. Specimens of transbronchial lung biopsy were also reviewed and compared with thin-section CT findings. On the basis of these results, we concluded that squalene aspiration pneumonia can be reliably diagnosed by thin-section CT findings particularly when the appropriate history is known. (author). 19 refs., 3 figs

  8. Thin-section CT findings of arc-welders pneumoconiosis

    International Nuclear Information System (INIS)

    Han, Dae Hee; Goo, Jin Mo; Im, Jung Gi; Park, Seong Ho; Paek, Do Myung; Lee, Kyung Soo

    2000-01-01

    To describe the thin-section CT findings of arc-welders pneumoconiosis. Eighty-five arc-welders with a three to 30 (mean, 15)- year history of exposure underwent thin-section CT scanning. The extent of abnormalities detected was correlated with the severity of dyspnea and pulmonary function tests. For comparison, images of 43 smoking males (mean 25 pack-year) who underwent thin-section CT for other reasons (smokers' group) were also analyzed. Fifty-four welders (63.5%) and six smokers (14.0%) showed positive findings. Predominant thin-section CT findings were poorly-defined centrilobular micronodules (30/54, 55.6%), branching linear structure (18/54, 33.3%), and ground-glass attenuation (6/54, 11.1%). In the smokers group, poorly-defined micronodules were found in four patients, branching linear structures in one, and ground-glass attenuation in one. In welders, the extent of abnormalities seen on thin-section CT showed no significant correlation with the severity of dyspnea or the results of pulmonary function test. Poorly-defined centrilobular micronodules and branching linear structures were the thin-section CT findings most frequently seen in patients with arc-welders pneumoconiosis. Less commonly, extensive ground-glass attenuation was also seen

  9. Evaluation of thymoma by thin-section CT images

    International Nuclear Information System (INIS)

    Kato, Yuji; Yamada, Kouzo; Oshita, Fumihiro; Nomura, Ikuo; Noda, Kazumasa; Ishiwa, Naoki; Maehara, Takamitsu; Kameda, Youichi

    1998-01-01

    With regard to thymoma, the location of the tumors, their internal structure, and their relationship with surrounding structures are the most important factors in clinical diagnosis. A positive finding influences not only the surgical procedure selected but also the prognosis of the patient as well. To investigate the usefulness of thin-section computed tomography (CT) in detecting invasion to structures surrounding tumors, we performed a prospective study of 20 patients with tumors, including 10 cases of non-invasive thymoma, 6 of invasive thymoma, and 4 of thymic cancer. A comparison of diagnoses based on the findings of a thin-section CT and pathologic examination showed that thin-section CT was 90% accurate in detecting invasion to structures surrounding tumors and 90% accurate for septum on internal analysis. Conventional CT, on the other hand, showed 45% accuracy for pleural invasion of interlobar fissures and 45% accuracy for septum. This leads to the conclusion that thin-section CT is helpful in attaining accurate evaluation of internal structures and invasion of structures by thymoma, especially in patients in whom findings by conventional CT suggests possible tumor invasion of surrounding structures. (author)

  10. Evaluation of thymoma by thin-section CT images

    Energy Technology Data Exchange (ETDEWEB)

    Kato, Yuji; Yamada, Kouzo; Oshita, Fumihiro; Nomura, Ikuo; Noda, Kazumasa; Ishiwa, Naoki; Maehara, Takamitsu; Kameda, Youichi [Kanagawa Cancer Center (Japan)

    1998-12-01

    With regard to thymoma, the location of the tumors, their internal structure, and their relationship with surrounding structures are the most important factors in clinical diagnosis. A positive finding influences not only the surgical procedure selected but also the prognosis of the patient as well. To investigate the usefulness of thin-section computed tomography (CT) in detecting invasion to structures surrounding tumors, we performed a prospective study of 20 patients with tumors, including 10 cases of non-invasive thymoma, 6 of invasive thymoma, and 4 of thymic cancer. A comparison of diagnoses based on the findings of a thin-section CT and pathologic examination showed that thin-section CT was 90% accurate in detecting invasion to structures surrounding tumors and 90% accurate for septum on internal analysis. Conventional CT, on the other hand, showed 45% accuracy for pleural invasion of interlobar fissures and 45% accuracy for septum. This leads to the conclusion that thin-section CT is helpful in attaining accurate evaluation of internal structures and invasion of structures by thymoma, especially in patients in whom findings by conventional CT suggests possible tumor invasion of surrounding structures. (author)

  11. STEREOLOGICAL ESTIMATION OF TUBULAR LENGTH FROM THIN VERTICAL SECTIONS

    Directory of Open Access Journals (Sweden)

    Helle V Clausen

    2011-05-01

    Full Text Available In this study tubular structures are represented by stem villous arteries of the human placenta. The architecture of the vascular tree in the human placenta makes it appropriate to use vertical histological sections. Describing tubules, estimates of total length and diameter are informative. The aim of the study was to derive a new stereological estimator of the total length of circular tubules observed in thin vertical sections. Design: Dual perfusion fixed human placentas. Systematic, uniformly random sampling of vertical sections. Five-μm-sections were stained by haematoxylin and eosin (H&E and the vertical axis was identified in all sections. A test system with cycloid test lines was used. Since tubular surface area is proportional to length and diameter, S ∝ πdL, surface-weightening is equivalent to diameter×lengthweightening. As each diameter (extra weight is known, one may eliminate the diameter-weightening by computing the harmonic mean diameter, which is thus the correct, length-weighted mean tubular diameter, dL = d hS . Surface area is estimated in the ordinary way from vertical sections, and with unbiased and robust estimates of S and dL respectively, total length may be estimated L = S / πdhs Conclusion: A new stereological estimator of total length of a circular tubular structure observed in thin vertical sections is presented.

  12. Microscopic description of production cross sections including deexcitation effects

    Science.gov (United States)

    Sekizawa, Kazuyuki

    2017-07-01

    Background: At the forefront of the nuclear science, production of new neutron-rich isotopes is continuously pursued at accelerator laboratories all over the world. To explore the currently unknown territories in the nuclear chart far away from the stability, reliable theoretical predictions are inevitable. Purpose: To provide a reliable prediction of production cross sections taking into account secondary deexcitation processes, both particle evaporation and fission, a new method called TDHF+GEMINI is proposed, which combines the microscopic time-dependent Hartree-Fock (TDHF) theory with a sophisticated statistical compound-nucleus deexcitation model, GEMINI++. Methods: Low-energy heavy ion reactions are described based on three-dimensional Skyrme-TDHF calculations. Using the particle-number projection method, production probabilities, total angular momenta, and excitation energies of primary reaction products are extracted from the TDHF wave function after collision. Production cross sections for secondary reaction products are evaluated employing GEMINI++. Results are compared with available experimental data and widely used grazing calculations. Results: The method is applied to describe cross sections for multinucleon transfer processes in 40Ca+124Sn (Ec .m .≃128.54 MeV ), 48Ca+124Sn (Ec .m .≃125.44 MeV ), 40Ca+208Pb (Ec .m .≃208.84 MeV ), 58Ni+208Pb (Ec .m .≃256.79 MeV ), 64Ni+238U (Ec .m .≃307.35 MeV ), and 136Xe+198Pt (Ec .m .≃644.98 MeV ) reactions at energies close to the Coulomb barrier. It is shown that the inclusion of secondary deexcitation processes, which are dominated by neutron evaporation in the present systems, substantially improves agreement with the experimental data. The magnitude of the evaporation effects is very similar to the one observed in grazing calculations. TDHF+GEMINI provides better description of the absolute value of the cross sections for channels involving transfer of more than one proton, compared to the grazing

  13. Topography description of thin films by optical Fourier Transform

    International Nuclear Information System (INIS)

    Jaglarz, Janusz

    2008-01-01

    In this work, the main problems concerning the scattering of light by real surfaces and films are presented in view of results obtained with the bidirectional reflection distribution function (BRDF) method and optical profilometry (OP). The BRDF and OP studies, being complementary to the atomic force microscopy (AFM), allow one to get information about surface topography. From the optical data, the surface power spectral density (PSD) functions for absorbing and transparent rough films have been found. Both functions have been evaluated from the Fourier transform (FT) of the surface profiles. The usefulness of BRDF-and OP methods in characterization of real surfaces is demonstrated when analyzing the optical data obtained for metallic TiN-and organic PVK thin films deposited on various substrates

  14. Bronchial diverticula in smokers on thin-section CT

    Energy Technology Data Exchange (ETDEWEB)

    Sverzellati, Nicola; Ingegnoli, Anna [University of Parma, Department of Clinical Sciences, Division of Radiology, Parma (Italy); Calabro, Elisa; Pastorino, Ugo [National Cancer Institute, Division of Thoracic Surgery, Milan (Italy); Randi, Giorgia; La Vecchia, Carlo [Mario Negri Institute, Department of Epidemiology, Milan (Italy); University of Milano, Institute of Medical Statistics and Biometry ' ' G. A. Maccacaro' ' , Milan (Italy); Marchiano, Alfonso [National Cancer Institute, Division of Radiology, Milan (Italy); Kuhnigk, Jan-Martin [Fraunhofer MEVIS - Institute for Medical Image Computing, Bremen (Germany); Hansell, David M. [Royal Brompton Hospital, Department of Radiology, London (United Kingdom); Zompatori, Maurizio [S. Orsola-Malpighi Hospital, Department of Radiology, Bologna (Italy)

    2010-01-15

    The objective was to determine the prevalence of bronchial diverticula in smokers on thin-section CT and the relationship to clinical and other morphological features on CT. Thin-section CT images of 503 cigarette smokers were assessed for the profusion and location of diverticula in the major airways. The extent of the bronchial diverticula was recorded as follows: grade 0, none; grade 1, one to three diverticula; grade 2, more than three diverticula. The extent of emphysema, bronchial wall thickness, clinical features, and pulmonary function were compared in the sub-groups stratified according to the extent of bronchial diverticula. A total of 229/503 (45.5%) smokers had bronchial diverticula, with 168/503 (33.3%) and 61/503 (12.2%) having grade 1 and 2 bronchial diverticula respectively. Subjects with grade 2 bronchial diverticula were heavier smokers, reported a history of coughing more frequently, and showed more severe functional impairment, greater extent of emphysema and more severe bronchial wall thickening compared with subjects with grade 1 and those individuals without bronchial diverticula (P<0.05). Multivariate regression analysis revealed that only bronchial wall thickness predicted the extent of the bronchial diverticula (P<0.0001). Bronchial diverticula are a frequent finding in the major airways of smokers, and they are associated with other markers of smoking-related damage. (orig.)

  15. Low-head feeding system for thin section castings

    Science.gov (United States)

    Daniel, Sabah S.; Kleeb, Thomas R.; Lewis, Thomas W.; McDermott, John F.; Ozgu, Mustafa R.; Padfield, Ralph C.; Rego, Donovan N.; Vassilicos, Achilles

    1990-01-01

    A feed system is provided for conveying molten metal to a thin section caster having mold surfaces moving exclusively in the direction of casting. The feed system has a passage of circular cross section adjacent to one end thereof for receiving molten metal and a rectangular cross section at the delivery end thereof adjacent to the caster. The feed system is designed for supplying molten metal to the caster at low pressure for "closed-pool" type caster operation. The point of highest elevation in the metal flow passage of the feed system is on the upper surface of a transition portion where the cross section changes from circular to rectangular adjacent to the nozzle. The level or height of the high point above the centerline of the nozzle exit is selected so as to be less than the pressure of the metal measured in inches at the nozzle exit. This feature enables the maintenance of positive pressure in the metal within the feed system so that ingress of air into the metal is prevented.

  16. A microfluidic approach to water-rock interactions using thin rock sections: Pb and U sorption onto thin shale and granite sections

    Energy Technology Data Exchange (ETDEWEB)

    Oh, Youn Soo [Institute of Mine Reclamation Technology, Mine Reclamation Corp., 2 Segye-ro, Wonju-si, Gangwon-do, 26464 (Korea, Republic of); Jo, Ho Young, E-mail: hyjo@korea.ac.kr [Department of Earth and Environmental Sciences, Korea University, Anam-dong, Seongbuk-gu, Seoul, 02841 (Korea, Republic of); Ryu, Ji-Hun; Kim, Geon-Young [Korea Atomic Energy Research Institute, 1045 Daedeokdaero, Yuseong-gu, Daejeon, 34057 (Korea, Republic of)

    2017-02-15

    Highlights: • Microfluidic tests was used to investigate water-rock (mineral) interactions. • Pb and U sorption onto thin shale and granite sections was evaluated. • Pb removal by thin shale section is related primarily to Fe-containing minerals. • A slightly larger amount of U was removed onto the thin granite section with Fe-containing minerals. - Abstract: The feasibility of using microfluidic tests to investigate water-rock (mineral) interactions in fractures regarding sorption onto thin rock sections (i.e., shale and granite) of lead (Pb) and uranium (U) was evaluated using a synthetic PbCl{sub 2} solution and uranium-containing natural groundwater as fluids. Effluent composition and element distribution on the thin rock sections before and after microfluidic testing were analyzed. Most Pb removal (9.8 mg/cm{sup 2}) occurred within 3.5 h (140 PVF), which was 74% of the total Pb removal (13.2 mg/cm{sup 2}) at the end of testing (14.5 h, 560 PVF). Element composition on the thin shale sections determined by μ-XRF analysis indicated that Pb removal was related primarily to Fe-containing minerals (e.g., pyrite). Two thin granite sections (biotite rich, Bt-R and biotite poor, Bt-P) exhibited no marked difference in uranium removal capacity, but a slightly higher amount of uranium was removed onto the thin Bt-R section (266 μg/cm{sup 2}) than the thin Bt-P section (240 μg/cm{sup 2}) within 120 h (4800 PVF). However, uranium could not be detected by micro X-ray fluorescence (μ-XRF) analysis, likely due to the detection limit. These results suggest that microfluidic testing on thin rock sections enables quantitative evaluation of rock (mineral)-water interactions at the micro-fracture or pore scale.

  17. INJURIES IN DISC GOLF - A DESCRIPTIVE CROSS-SECTIONAL STUDY

    DEFF Research Database (Denmark)

    Rahbek, Martin Amadeus; Nielsen, Rasmus Oestergaard

    2016-01-01

    BACKGROUND: Disc golf is rapidly increasing in popularity and more than two million people are estimated to regularly participate in disc golf activities. Despite this popularity, the epidemiology of injuries in disc golf remains under reported. PURPOSE: The purpose of the present study was to in......BACKGROUND: Disc golf is rapidly increasing in popularity and more than two million people are estimated to regularly participate in disc golf activities. Despite this popularity, the epidemiology of injuries in disc golf remains under reported. PURPOSE: The purpose of the present study...... was to investigate the prevalence and anatomic distribution of injuries acquired through disc-golf participation in Danish disc golf players. METHODS: The study was a cross-sectional study conducted on Danish disc-golf players. In May 2015, invitations to complete a web-based questionnaire were spread online via...... social media, and around disc-golf courses in Denmark. The questionnaire included questions regarding disc-golf participation and the characteristics of injuries acquired through disc golf participation. The data was analyzed descriptively. RESULTS: An injury prevalence of 13.3% (95% CI: 6.7% to 19...

  18. Special Section Guest Editorial: Nanostructured Thin Films IX: Design, Fabrication, Characterization, and Modeling

    Science.gov (United States)

    Lakhtakia, Akhlesh; Mackay, Tom G.; Suzuki, Motofumi

    2017-10-01

    This guest editorial introduces the special section on Nanostructured Thin Films IX: Design, Fabrication, Characterization, and Modeling, which appears in the October-December 2017 issue of the Journal of Nanophotonics.

  19. Simplified description of out-of-plane waves in thin annular elastic plates

    DEFF Research Database (Denmark)

    Zadeh, Maziyar Nesari; Sorokin, Sergey

    2013-01-01

    of the elementary beam theory is validated. The wave finite element method in the formulation of the three-dimensional elasticity theory is used to ensure that the comparison of dispersion diagrams is performed in the frequency range, where the classical thin plate theory is valid. Thus, the paper summarizes......Dispersion relations are derived for the out-of-plane wave propagation in planar elastic plates with constant curvature using the classical Kirchhoff thin plate theory. The dispersion diagrams and the mode shapes are compared with their counterparts for a straight plate strip and the role...... of curvature is assessed for plates with unconstrained edges. Elementary Bernoulli–Euler theory for a beam of rectangular cross-section with the circular shape of its axis is also employed to analyze the wave guide properties of this structure in its out-of-plane deformation. The applicability range...

  20. Development of Thin Section Zinc Die Casting Technology

    Energy Technology Data Exchange (ETDEWEB)

    Goodwin, Frank [International Lead Zinc Research Org., Inc., Durham, NC (United States)

    2013-10-31

    A new high fluidity zinc high pressure die casting alloy, termed the HF alloy, was developed during laboratory trials and proven in industrial production. The HF alloy permits castings to be achieved with section thicknesses of 0.3 mm or less. Technology transfer activities were conducted to develop usage of the HF high fluidity alloy. These included production of a brochure and a one-hour webinar on the HF alloy. The brochure was then sent to 1,184 product designers in the Interzinc database. There was excellent reception to this mailing, and from this initial contact 5 technology transfer seminars were conducted for 81 participants from 30 companies across a wide range of business sectors. Many of the successful applications to date involve high quality surface finishes. Design and manufacturing assistance was given for development of selected applications.

  1. Artificial intelligence aiding the thin-section CT diagnosis of diffuse pulmonary diseases

    International Nuclear Information System (INIS)

    Han, Dae Hee; Koh, Young Hwan; Seong, Chang Kyu; Kim, Ji Hoon; Choi, Young Ho; Kim, Jong Hyo; Chae, Young Moon; Lee, Yun Hee; Han, Heon

    2006-01-01

    We wanted to develop and test an artificial intelligence (AI) to assist physicians in making the thin-section CT diagnosis of diffuse pulmonary diseases. The AI was composed of knowledge bases (KB) of 12 diffuse pulmonary diseases and an inference engine (IE). The KB of a disease included both the inclusion criteria (IC) and the exclusion criteria (EC), which were the clinical or thin-section CT findings that were known to be present or absent in that particular disease, respectively. From imputing the clinical or thin-section CT findings by the operator who was reading the thin-section CT, AI instantly executed the following two steps. First, the IE eliminated all diseases from the list which the EC had for those particular findings. Next, from a list or remaining diseases, the AI selected those diseases having those findings in its IC to formulate the 1st-step differential diagnosis (DD1). For the differential diagnosis in the next step, the reader could choose one more clinical or thin-section CT finding from the new list: [(all the findings in the IC or EC of DD1)-(the findings in the IC common to all the DD1s)]. The reader could proceed even further if needed. The system was tested on 10 radiology residents who solved 24 problems (two problems for each of 12 diffuse pulmonary diseases) without and then with the aid of the AI. The scores were compared using the Wilcoxon signed rank test. An AI was made; it was composed of 280 rules (214 IC and 66 EC) and there interfaces (two for program management and another for problem solving). Contestants scored higher (ρ = 0.0078) using the AI (167 vs. 110 respectively), and they responded that they felt that the program was helpful in making decisions. AI appeared to be helpful in making thin-section CT diagnosis

  2. Artificial intelligence aiding the thin-section CT diagnosis of diffuse pulmonary diseases

    Energy Technology Data Exchange (ETDEWEB)

    Han, Dae Hee; Koh, Young Hwan; Seong, Chang Kyu; Kim, Ji Hoon; Choi, Young Ho [Boramae Munincipal Hospital, Seoul National University College of Medicine, Seoul (Korea, Republic of); Kim, Jong Hyo [Seoul National University College of Medicine, Seoul (Korea, Republic of); Chae, Young Moon [Yonsei University Graduate School of Public Heath, Seoul (Korea, Republic of); Lee, Yun Hee [The Graduate School of Imformation, Yonsei, Seoul (Korea, Republic of); Han, Heon [Kangwon National University College of Medicine, Chuncheon (Korea, Republic of)

    2006-06-15

    We wanted to develop and test an artificial intelligence (AI) to assist physicians in making the thin-section CT diagnosis of diffuse pulmonary diseases. The AI was composed of knowledge bases (KB) of 12 diffuse pulmonary diseases and an inference engine (IE). The KB of a disease included both the inclusion criteria (IC) and the exclusion criteria (EC), which were the clinical or thin-section CT findings that were known to be present or absent in that particular disease, respectively. From imputing the clinical or thin-section CT findings by the operator who was reading the thin-section CT, AI instantly executed the following two steps. First, the IE eliminated all diseases from the list which the EC had for those particular findings. Next, from a list or remaining diseases, the AI selected those diseases having those findings in its IC to formulate the 1st-step differential diagnosis (DD1). For the differential diagnosis in the next step, the reader could choose one more clinical or thin-section CT finding from the new list: [(all the findings in the IC or EC of DD1)-(the findings in the IC common to all the DD1s)]. The reader could proceed even further if needed. The system was tested on 10 radiology residents who solved 24 problems (two problems for each of 12 diffuse pulmonary diseases) without and then with the aid of the AI. The scores were compared using the Wilcoxon signed rank test. An AI was made; it was composed of 280 rules (214 IC and 66 EC) and there interfaces (two for program management and another for problem solving). Contestants scored higher ({rho} = 0.0078) using the AI (167 vs. 110 respectively), and they responded that they felt that the program was helpful in making decisions. AI appeared to be helpful in making thin-section CT diagnosis.

  3. One-dimensional analysis of filamentary composite beam columns with thin-walled open sections

    Science.gov (United States)

    Lo, Patrick K.-L.; Johnson, Eric R.

    1986-01-01

    Vlasov's one-dimensional structural theory for thin-walled open section bars was originally developed and used for metallic elements. The theory was recently extended to laminated bars fabricated from advanced composite materials. The purpose of this research is to provide a study and assessment of the extended theory. The focus is on flexural and torsional-flexural buckling of thin-walled, open section, laminated composite columns. Buckling loads are computed from the theory using a linear bifurcation analysis and a geometrically nonlinear beam column analysis by the finite element method. Results from the analyses are compared to available test data.

  4. Estimating the thickness of ultra thin sections for electron microscopy by image statistics

    DEFF Research Database (Denmark)

    Sporring, Jon; Khanmohammadi, Mahdieh; Darkner, Sune

    2014-01-01

    We propose a method for estimating the thickness of ultra thin histological sections by image statistics alone. Our method works for images, that are the realisations of a stationary and isotropic stochastic process, and it relies on the existence of statistical image-measures that are strictly m...

  5. Mosaic pattern of lung attenuation on thin-section CT : review of 31 cases

    International Nuclear Information System (INIS)

    Choi, Young Hi; An, Jee Hyun; Lee, Kye Young; Jee, Young Koo; Lee, Young Seok

    1998-01-01

    To correlate radiologic findings with clinical findings in patients with a mosaic pattern of lung attenuation, as seen on thin-section CT. Materials and Methods : Thirty-one cases in which a mosaic pattern of lung attenuation was detected on combined expiratory and inspiratory scans of thin-section CT were retrospectively analyzed. Cases involving infiltrative lung disease were excluded. Both thin-section CT and clinical findings we reanalyzed and the relationship between the extent of the area of hyperlucency -as seen on expiratory scan- and physiologic parameters was evaluated. The subjects were 10 men and 21 women ranged in age from 25 to 76 (mean 50)years. Results : Twenty-nine patients with small airway disease, [chronic bronchitis and/or bronchiolitis(n=11),bronchiectasis(n=8), bronchial asthma(n=8), mycoplasmic pneumonitis(n=1) and hypersensitive pneumonitis(n=1),] and two patients with pulmonary vascular disease, [chronic pulmonary thromboembolism(n=1) and stenosis of the left upper pulmonary artery(n=1)] were included in our study. Commonly associated thin-section CT findings in the cases involving small airway disease(n=29) were bronchial wall thickening(n=25), nodular opacity(n=25), bronchial and bronchiolar dilatation(n=20) and small branching opacity(n=16). These findings were not observed in two patients with pulmonary vascular disease, though bronchial wall thickening was seen in the patient with chronic pulmonary thromboembolism. At expiratory scan level, there was statistical correlation between FEV1/FVC and the number of pulmonary segments(r= 0.982, p 0.05). Conclusion: The mosaic pattern of lung attenuation seen on thin-section CT is indicative of various diseases, involving small airways such as bronchiolitis, bronchitis, bronchiectasis and bronchial asthma, and vascular lung disease. Bronchial wall thickening and nodular opacity can be associated with small airway diseases

  6. Unified description of neutron-, proton- and photon-induced fission cross sections in intermediate energy region

    International Nuclear Information System (INIS)

    Fukahori, Tokio; Iwamoto, Osamu; Chiba, Satoshi

    2003-01-01

    For an accelerator-driven nuclear waste transmutation system, it is very important to estimate sub-criticality of core system for feasibility and design study of the system. The fission cross section in the intermediate energy range has an important role. A program FISCAL has been developed to calculate neutron-, proton- and photon-induced fission cross sections in the energy region from several tens of MeV to 3 GeV. FISCAL adopts the systematics considering experimental data for Ag- 243 Am. It is found that unified description of neutron-, proton- and photon-induced fission cross sections is available. (author)

  7. Iron melt flow in thin-walled sections using vertically parted moulds

    DEFF Research Database (Denmark)

    Larsen, Per; Tiedje, Niels

    2004-01-01

    gating systems are used small changes in the casting conditions can change the flow patterns radically. Flow in thin walled sections is not only important in thin walled part. This is illustrated with a brake disc as example. 3 different layouts have been made. The filling sequences have been recorded......Reducing the fuel consumption of vehicles can be done in many ways. A general way of doing it, is to reduce the weight as it is applicable together with all other means of saving fuel. Even though iron castings have been used in cars from the first car ever build, a big potential still exist...... for optimizing iron cast parts. To do so thin walled parts have to be used. I.e. flow in thin walled sections becomes important. Flow in plates with thicknesses from 2 to 4 mm have been investigated. It is shown that the main flow path can be changed even in such small thicknesses and that when conventional...

  8. Quality of sleep and selective attention in university students: descriptive cross-sectional study

    OpenAIRE

    Silvia Alicia Fontana; Waldina Raimondi; María Laura Rizzo

    2014-01-01

    INTRODUCTION Sleep quality not only refers to sleeping well at night, but also includes appropriate daytime functioning. Poor quality of sleep can affect a variety of attention processes. PURPOSE The aim of this investigation was to evaluate the relationship between the perceived quality of sleep and selective focus in a group of college students. METHODS A descriptive cross-sectional study was carried out in a group of 52 Argentinian college students of the Universidad Adven...

  9. Semiempirical description of the PWBA scaled electron ionization cross section for atoms

    International Nuclear Information System (INIS)

    Campeanu, R.I.; Koch, S.

    1981-01-01

    Accurate electron ionization cross sections on atoms and ions are required in many areas of physics, such as the modeling of impurity effects in tokamak plasmas, or the modeling of laser-produced plasmas. The large number of the data needed in these cases precludes the possibility of the quantum calculations, which are even on fast computers time-consuming. This situation encouraged the studies on semiempirical formulae and on scaling laws. It is therefore useful to perform semiempirical calculations based on scaled theoretical cross sections. Our paper gives a semiempirical description of the electron single ionization on atoms. (orig./FKS)

  10. Cysts, cavities, and honeycombing in multisystem disorders: differential diagnosis and findings on thin-section CT

    Energy Technology Data Exchange (ETDEWEB)

    Grant, L.A.; Babar, J. [Department of Radiology, Addenbrooke' s hospital, Cambridge (United Kingdom); Griffin, N. [Department of Radiology, Guy' s and St Thomas' Hospital, London (United Kingdom)], E-mail: nyreegriffin@hotmail.com

    2009-04-15

    Pulmonary cysts, cavities, and honeycombing are seen in a number of systemic disorders. The purpose of this review is to discuss the findings on thin-section computed tomography (CT) in both congenital and acquired multisystem conditions that give rise to multiple cystic spaces in the lungs. Conditions discussed include lymphangioleiomyomatosis, Langerhan's cell histiocytosis, lymphocytic interstitial pneumonia, and Birt-Hogg-Dube syndrome, with reference to specific features that may be helpful in the differentiation of these conditions on CT.

  11. Coronary CT angiography characteristics of OCT-defined thin-cap fibroatheroma: a section-to-section comparison study.

    Science.gov (United States)

    Yang, Dong Hyun; Kang, Soo-Jin; Koo, Hyun Jung; Chang, Mineok; Kang, Joon-Won; Lim, Tae-Hwan; Baek, Seunghee; Han, Seungbong; Lee, Pil Hyung; Roh, Jae-Hyung; Ahn, Jung-Min; Park, Duk-Woo; Lee, Seung-Whan; Lee, Cheol Whan; Park, Seong-Wook; Park, Seung-Jung; Mintz, Gary S; Kim, Young-Hak

    2018-02-01

    To evaluate whether plaque characteristics as assessed by coronary computed tomography angiography (CCTA) were associated with the presence of a thin-cap fibroatheroma (TCFA)-a precursor of plaque rupture-defined by optical coherence tomography (OCT) in a section-to-section-level comparison. From 28 symptomatic patients, 31 coronary lesions were evaluated on 727 cross-sections co-registered by both CCTA and OCT. CCTA plaque characteristics included low attenuation plaque (LAP, OCT, presence of TCFA, lumen area and arc of lipid were determined. OCT revealed a TCFA in 69 (9.4%) sections from 19 (61.2 %) lesions. In per-section analysis, OCT-TCFA showed higher frequency of CCTA-detected LAP (58.0% vs. 18.5%), NRS (31.9% vs. 8.8%) and PR (68.1% vs. 48.0%) and greater plaque burden (70.6% vs. 61.9%) as compared to sections without OCT-TCFA (all p OCT-TCFA. CCTA-measured lumen area correlated well with OCT-measured lumen area (R = 0.859, limits of agreement -0.5 ± 3.7 mm 2 ). LAP and NRS in CCTA were associated with the presence of OCT-defined TCFA in a section-to-section comparison. • CT-defined LAP and NRS were associated with OCT-defined TCFA • OCT-TCFA showed higher frequency of LAP, NRS, PR and greater plaque burden • Non-calcified plaque area was correlated with OCT-measured lipid arc.

  12. Pulmonary candidiasis after hematopoietic stem cell transplantation: thin-section CT findings.

    Science.gov (United States)

    Franquet, Tomás; Müller, Nestor L; Lee, Kyung S; Oikonomou, Anastasia; Flint, Julia D

    2005-07-01

    To retrospectively evaluate thin-section computed tomographic (CT) findings in hematopoietic stem cell transplant (ie, bone marrow transplant) patients with histopathologically proved pulmonary candidiasis. Ethical approval was obtained from the institutional review board of each of the three institutions; informed consent was not required. The study included 17 hematopoietic stem cell transplant recipients with proved pulmonary candidiasis. Histopathologic specimens were acquired at transbronchial biopsy (n = 8), open lung biopsy (n = 6), and autopsy (n = 3). The patients included seven men and 10 women (age range, 20-62 years; mean age, 37 years). The thin-section CT scans were retrospectively reviewed by two thoracic radiologists for the presence, appearance, and distribution of parenchymal abnormalities. Multiple nodules were present in 15 (88%) patients, including centrilobular nodules and tree-in-bud pattern in seven (41%) patients. Nodules were bilateral in 12 patients and unilateral in three. An associated halo of ground-glass opacity was identified in five (33%) patients. Nodules were the only CT finding in five patients (29%). Areas of air-space consolidation were identified in 11 (65%) patients. Areas of ground-glass opacity were seen in six (35%) of 17 patients and were always associated with other abnormalities. Other less common CT findings included pleural effusion (n = 3), thickening of the bronchial walls (n = 2), and cavitation (n = 1). The most common thin-section CT findings of pulmonary candidiasis in hematopoietic stem cell transplant patients are multiple bilateral nodular opacities often associated with areas of consolidation. Copyright RSNA, 2005

  13. Analysis of moderately thin-walled beam cross-sections by cubic isoparametric elements

    DEFF Research Database (Denmark)

    Høgsberg, Jan Becker; Krenk, Steen

    2014-01-01

    In technical beam theory the six equilibrium states associated with homogeneous tension, bending, shear and torsion are treated as individual load cases. This enables the formulation of weak form equations governing the warping from shear and torsion. These weak form equations are solved...... numerically by introducing a cubic-linear two-dimensional isoparametric element. The cubic interpolation of this element accurately represents quadratic shear stress variations along cross-section walls, and thus moderately thin-walled cross-sections are effectively discretized by these elements. The ability...

  14. SECTIO: a program for the determination of cross sectional properties of closed thin walled beams

    Energy Technology Data Exchange (ETDEWEB)

    Lundsager, P.

    1979-07-01

    The report contains the theoretical basis and users manual for the program SECTIO. Intending for use in connectio with a general purpose finite element program. SECTIO computes bending properties from Bernovilli beam theory and torsional properties from St. Venant theory for thin walled, closed sections. The theories are developed for cross sections with inhomogeneous materials onja form that gives results which are compatible with conventional homogeneous beam elements, and a startegy for modelling beams with non-coincident axes using conventional beam elements is outlined. The accuracy of results is demonstrated by examples, and a sample problem is shown, including listing of input and output.

  15. Usefulness of concurrent reading using thin-section and thick-section CT images in subcentimetre solitary pulmonary nodules.

    Science.gov (United States)

    Lee, H Y; Goo, J M; Lee, H J; Lee, C H; Park, C M; Park, E-A; Im, J-G

    2009-02-01

    To evaluate the differences in the characterization and recommendation for follow-up of subcentimetre solitary pulmonary nodules (SSPNs) between 5 and 1mm section CT, and to compare the assessments generated by four radiologists Five hundred and twenty-nine patients who had SSPNs on chest CT reconstructed using both 5 and 1mm sections were enrolled. Two image subsets of 5 and 1mm CT images of each nodule were interpreted independently by four radiologists. Nodule size, consistency (solid, partly solid, non-solid), the presence of calcification, and recommendations for follow-up were evaluated. If a non-calcified solid nodule was confirmed using CT, recommendation for follow-up was based on Fleischner Society guidelines. Data assessed by each radiologist were compared, and interobserver agreements were determined using the intraclass correlation coefficients and kappa value. Using 1mm CT images, the nodule sizes were significantly larger than on 5mm CT images (paired t-test, pimages (McNemar test for the presence of calcification, pimages there was significantly higher agreement regarding nodule consistency than on 5mm CT (kappa=0.78 and 0.67, respectively). Concurrent use of thin-section and thick-section CT can provide more accurate nodule assessment and higher interobserver agreement in SSPN.

  16. THIN-WALLED CROSS SECTION SHAPE INFLUENCE ON STEEL MEMBER RESISTANCE

    Directory of Open Access Journals (Sweden)

    Elżbieta Urbańska-Galewska

    2016-03-01

    Full Text Available This work describes why trending thin-walled technology is achieving popularity in steel construction sector. A purpose of this article is to present the influence of the cold-formed element cross-section shape on an axial compression and a bending moment resistance. The authors have considered four different shapes assuming constant section area and thickness. Calculations were based on three different steel grades taking into account local, distortional and overall buckling. The results are presented in a tabular and a graphical way and clearly confirm that cross-section forming distinctly impact the cold-formed member resistance. The authors choose these cross-sections that work better in compression state and the other (those slender and high that function more efficiently are subjected to bending.

  17. Fungus infection in immunocompromised rabbits: correlation of thin-section CT findings and histopathology

    International Nuclear Information System (INIS)

    Xue Feng; Liu Shiyuan; Xie Lixuan; Liu Kai; Zhang Jian; Chen Yousan; Li Huimin; He Jin

    2009-01-01

    Objective: To compare the thin-section CT findings of pulmonary candidiasis, aspergillosis and cryptococcosis with histopathology in immunocompromised rabbits and improve the diagnostic accuracy of fungus infection. Methods: Healthy New Zealand white rabbits were used for immunocompromised animal models. Thin-section CT scan was performed before and 2, 4, 6, 8, 10, 12, 14 d after inoculation. The pattern and distribution of the pulmonary abnormalities were retrospectively assessed by two thoracic radiologists and compared with histopathology. The granulocyte count was compared before and after administration of immunosuppressive agents. The paired t test, chi square test and the Fisher's exact test were used for the statistics. Results: Fourteen rabbits had candidiasis, 16 rabbits had eryptococcosis, 15 rabbits had aspergillosis. The granulocyte counts before and after administration of immunosuppressive agents were (2.91±0.92) and (0.35±0.19) x 10 9 /L respectively in candidiasis group, there was a significant difference (t=12.484, P 9 /L in aspergillosis group, there was a significant difference (t=5.792, P 9 /L in cryptococcosis group, there was a significant difference (t=8.199, P 0.05). Ground glass opacity (GGO) and consolidation were the two most common findings in immunocompromised rabbits with three fungus infections, areas of GGO was correlated with the congestion, hemorrhage, inflammatory cell infiltration and interstitial hyperplasia in pathology. Consolidation was correlated with the severe congestion, hemorrhage, inflammatory cell infiltration, interstitial hyperplasia, necrosis and vascular embolism in pathology. Conclusion: GGO and consolidation are the two most common findings of fungus infections in immunocompromised animal models and thin-section CT findings can reflect the pathological changes. (authors)

  18. Development of low-dose protocols for thin-section CT assessment of cystic fibrosis in pediatric patients.

    LENUS (Irish Health Repository)

    O'Connor, Owen J

    2010-12-01

    To develop low-dose thin-section computed tomographic (CT) protocols for assessment of cystic fibrosis (CF) in pediatric patients and determine the clinical usefulness thereof compared with chest radiography.

  19. Special section guest editorial: Nanostructured thin films V: Fundamentals and applications

    OpenAIRE

    MacKay, Tom G.; Jen, Yijun; Martín-Palma, Raúl José

    2013-01-01

    MacKay, Tom G., Jen, Yijun, Martín-Palma, Raúl José, "Special section guest editorial: Nanostructured thin films V: Fundamentals and applications" Journal of Nanophotonics, Elsevier B.V, 7, 73501, (2013). Copyright 2014 Society of Photo Optical Instrumentation Engineers. One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the p...

  20. Iron Melt Flow in Thin Walled Sections Cast in Vertically Parted Green Sand Moulds

    DEFF Research Database (Denmark)

    Larsen, Per; Andersen, Uffa; Rasmussen, Niels

    consumption and pollution of passenger cars, trucks etc. The engine design can be optimized for higher efficiency, the wind resistance can be reduced, combinations of combustion engines and electrical power can be used etc. But no matter which approach is taken, parts have to be used for building the vehicles...... will be initiated by the hammer effect when the melt reaches the dead end of the runner. Pressure shock waves can also be initiated when the last air pocket in a partly filled runner is closed. The pressure shock waves result in disintegrating melt surfaces. Flow in thin walled sections is not only important when...

  1. Accuracy Enhancement of Spatial Response of Hybrid/Mixed Curved Beams with Thin-Walled Sections

    Science.gov (United States)

    Gendy, A. S.; Mesiha, F. M.

    2015-01-01

    Opposite to the conventional hybrid/mixed formulation in which stress parameters are selected with relaxed equilibrium conditions, a shear, flexible, thin-walled curve beam assemblage has been developed with stress parameters satisfying the equilibrium within the element level in addition to the common requirements; i.e., avoiding all kinematic deformation modes, and enabling the resulting element to handle applications with constrained problems (i.e., thin curved beams). Such stress parameters are of the interelement-independent type, and therefore can be eliminated on the element level by applying the relevant stationary conditions, thus leading to the standard form of the stiffness equations for implementation. The membrane and shear, due to flexure and warping, locking in this C°-element can be eliminated by adopting the Hellinger-Reissner-variational principle in which both displacement and stress fields are approximated independently. Further, the underlying generalized beam theory employed accounts for all coupled significant modes of deformations, including stretching, bending, shear, torsion, as well as warping. The formulation is also valid for both open- and closed-type thin-walled sections. Despite the effort in selecting the stress field to satisfy equilibrium within element, the developed model achieved better accuracy, robustness, and fast convergence.

  2. THIN SECTION DESCRIPTIONS: LITTLE UTE AND SLEEPING UTE FIELDS, MONTEZUMA COUNTY, COLORADO

    Energy Technology Data Exchange (ETDEWEB)

    David E. Eby; Laura L. Wray

    2003-12-01

    Over 400 million barrels (64 million m{sup 3}) of oil have been produced from the shallow-shelf carbonate reservoirs in the Pennsylvanian (Desmoinesian) Paradox Formation in the Paradox Basin, Utah and Colorado. With the exception of the giant Greater Aneth field, the other 100 plus oil fields in the basin typically contain 2 to 10 million barrels (0.3-1.6 million m{sup 3}) of original oil in place. Most of these fields are characterized by high initial production rates followed by a very short productive life (primary), and hence premature abandonment. Only 15 to 25 percent of the original oil in place is recoverable during primary production from conventional vertical wells. An extensive and successful horizontal drilling program has been conducted in the giant Greater Aneth field in Utah (figure 1). However, to date, only two horizontal wells have been drilled in small Ismay and Desert Creek fields. The results from these wells were disappointing due to poor understanding of the carbonate facies and diagenetic fabrics that create reservoir heterogeneity. These small fields, and similar fields in the basin, are at high risk of premature abandonment. At least 200 million barrels (31.8 million m{sup 3}) of oil will be left behind in these small fields because current development practices leave compartments of the heterogeneous reservoirs undrained. Through proper geological evaluation of the reservoirs, production may be increased by 20 to 50 percent through the drilling of low-cost single or multilateral horizontal legs from existing vertical development wells. In addition, horizontal drilling from existing wells minimizes surface disturbances and costs for field development, particularly in the environmentally sensitive areas of southeastern Utah and southwestern Colorado.

  3. Clinical and pulmonary thin-section CT findings in acute Klebsiella Pneumoniae pneumonia

    International Nuclear Information System (INIS)

    Okada, Fumito; Ando, Yumiko; Honda, Koichi; Nakayama, Tomoko; Kiyonaga, Maki; Ono, Asami; Tanoue, Shuichi; Maeda, Toru; Mori, Hiromu

    2009-01-01

    The aim of this study was to assess the clinical and pulmonary thin-section CT findings in patients with acute Klebsiella pneumoniae pneumonia. We retrospectively evaluated thin-section CT examinations performed between January 1991 and December 2007 from 962 patients with acute Klebsiella pneumoniae pneumonia. Seven hundred and sixty-four cases with concurrent infectious diseases were excluded. Thus, our study group comprised 198 patients (118 male, 80 female; age range 18-97 years, mean age 61.5). Underlying diseases and clinical findings were assessed. Parenchymal abnormalities were evaluated along with the presence of enlarged lymph nodes and pleural effusion. CT findings in patients with acute Klebsiella pneumoniae pneumonia consisted mainly of ground-glass attenuation (100%), consolidation (91.4%), and intralobular reticular opacity (85.9%), which were found in the periphery (96%) of both sides of the lungs (72.2%) and were often associated with pleural effusion (53%). The underlying conditions in patients with Klebsiella pneumoniae pneumonia were alcoholism or smoking habit. (orig.)

  4. Clinical and pulmonary thin-section CT findings in acute Klebsiella Pneumoniae pneumonia

    Energy Technology Data Exchange (ETDEWEB)

    Okada, Fumito [Oita University Faculty of Medicine, Department of Diagnostic and Interventional Radiology, Oita (Japan); Oita University Faculty of Medicine, Department of Radiology, Oita (Japan); Ando, Yumiko; Honda, Koichi; Nakayama, Tomoko; Kiyonaga, Maki; Ono, Asami; Tanoue, Shuichi; Maeda, Toru; Mori, Hiromu [Oita University Faculty of Medicine, Department of Diagnostic and Interventional Radiology, Oita (Japan)

    2009-04-15

    The aim of this study was to assess the clinical and pulmonary thin-section CT findings in patients with acute Klebsiella pneumoniae pneumonia. We retrospectively evaluated thin-section CT examinations performed between January 1991 and December 2007 from 962 patients with acute Klebsiella pneumoniae pneumonia. Seven hundred and sixty-four cases with concurrent infectious diseases were excluded. Thus, our study group comprised 198 patients (118 male, 80 female; age range 18-97 years, mean age 61.5). Underlying diseases and clinical findings were assessed. Parenchymal abnormalities were evaluated along with the presence of enlarged lymph nodes and pleural effusion. CT findings in patients with acute Klebsiella pneumoniae pneumonia consisted mainly of ground-glass attenuation (100%), consolidation (91.4%), and intralobular reticular opacity (85.9%), which were found in the periphery (96%) of both sides of the lungs (72.2%) and were often associated with pleural effusion (53%). The underlying conditions in patients with Klebsiella pneumoniae pneumonia were alcoholism or smoking habit. (orig.)

  5. Clinical and pulmonary thin-section CT findings in acute Klebsiella pneumoniae pneumonia.

    Science.gov (United States)

    Okada, Fumito; Ando, Yumiko; Honda, Koichi; Nakayama, Tomoko; Kiyonaga, Maki; Ono, Asami; Tanoue, Shuichi; Maeda, Toru; Mori, Hiromu

    2009-04-01

    The aim of this study was to assess the clinical and pulmonary thin-section CT findings in patients with acute Klebsiella pneumoniae pneumonia. We retrospectively evaluated thin-section CT examinations performed between January 1991 and December 2007 from 962 patients with acute Klebsiella pneumoniae pneumonia. Seven hundred and sixty-four cases with concurrent infectious diseases were excluded. Thus, our study group comprised 198 patients (118 male, 80 female; age range 18-97 years, mean age 61.5). Underlying diseases and clinical findings were assessed. Parenchymal abnormalities were evaluated along with the presence of enlarged lymph nodes and pleural effusion. CT findings in patients with acute Klebsiella pneumoniae pneumonia consisted mainly of ground-glass attenuation (100%), consolidation (91.4%), and intralobular reticular opacity (85.9%), which were found in the periphery (96%) of both sides of the lungs (72.2%) and were often associated with pleural effusion (53%). The underlying conditions in patients with Klebsiella pneumoniae pneumonia were alcoholism or smoking habit.

  6. Preparation of thin-sections of painting fragments: classical and innovative strategies.

    Science.gov (United States)

    Pouyet, Emeline; Lluveras-Tenorio, Anna; Nevin, Austin; Saviello, Daniela; Sette, Francesco; Cotte, Marine

    2014-04-25

    For more than a century, the analyses of painting fragments have been carried out mainly through the preparation of thick resin-embedded cross-sections. Taking into account the development of innovative micro-analytical imaging techniques, alternatives to this standard preparation method are considered. Consequently, dedicated efforts are required to develop preparation protocols limiting the risks of chemical interferences (solubilisation, reduction/oxidation or other reactions) which modify the sample during its preparation, as well as the risks of analytical interferences (overlap of detected signals coming from the sample and from materials used in the preparation). This study focuses particularly on the preparation of thin-sections (1-20 μm) for single or combined fourier transform infrared (FTIR) spectroscopy and X-ray 2D micro-analysis. A few strategies specially developed for the μFTIR analysis of painting cross-sections have already been reported and their potential extrapolation to the preparation of thin-sections is discussed. In addition, we propose two new specific methods: (i) the first is based on a free-embedding approach, ensuring a complete chemical and analytical neutrality. It is illustrated through application on polymeric design objects corpus; (ii) the second is based on a barrier coating approach which strengthens the sample and avoids the penetration of the resin into the sample. The barrier coating investigated is a silver chloride salt, an infrared transparent material, which remains malleable and soft after pellet compression, enabling microtoming. This last method was successfully applied to the preparation of a fragment from a gilded Chinese sculpture (15th C.) and was used to unravel a unique complex stratigraphy when combining μFTIR and μXRF. Copyright © 2014 Elsevier B.V. All rights reserved.

  7. Surface oxidation on thin films affects ionization cross section induced by proton beam

    International Nuclear Information System (INIS)

    Bertol, Ana Paula Lamberti; Vasconcellos, M.A.Z.; Hinrichs, Ruth; Limandri, Silvina; Trincavelli, Jorge

    2012-01-01

    Full text: In microanalysis techniques such as Particle Induced X-ray Emission (PIXE), the transformation from intensity to concentration is made by standard less software that needs exact values of fundamental parameters such as the ionization cross section, transition probabilities of the different electronic levels, and fluorescent yield. The three parameters together measure the photon generating probability of an electronic transition and can be determined experimentally under the name of production cross section. These measurements are performed on thin films, with thickness around 10 nm, but most studies do not take into account any spontaneous surface oxidation. In this work, in the attempt to obtain cross section values of Al, Si and Ti, in metallic and oxide films, the influence of surface oxidation on the metallic films was established. Simulations considering the oxidation with the software SIMNRA on the Rutherford backscattering (RBS) spectra obtained from the films provided mass thickness values used to calculate the cross section data that were compared with theoretical values (PWBA and ECPSSR), and with experimental values and empirical adjustments from other studies. The inclusion of the natural oxidation affects the values of cross section, and may be one of the causes of discrepancies between the experimental values published in literature. (author)

  8. Towards a unified description of light ion fusion cross section excitation functions

    International Nuclear Information System (INIS)

    Zimmer, K.W.

    1995-01-01

    A description of light heavy-ion fusion, taking into account both entrance-channel characteristics and compound-nucleus properties, is derived within a unified theory of nuclear reactions. The dependence of the imaginary fusion potential on the level density of the compound nucleus is revealed. The 12 C + 12 C, 12 C + 14 N, 10 B + 16 O and 16 O + 16 O fusion cross sections are calculated for E cm ≤ 120 MeV and compared with experimental data. The excitation energy dependence of the level-density parameter of 24 Mg, 26 Al and 32 S is inferred below 5 MeV/A. A realistic nuclear level-density model, describing the experimental level-density parameters of highly excited nuclei, is shown to be consistent with both the global features and details of the fusion cross section. 12 C + 12 C and 16 O + 16 O fusion cross section oscillations are predicted at large excitation energies, reflecting the structure of the level density of the highly excited light compound nuclei. Differences of the 12 C + 14 N and 10 B + 16 O fusion reaction mechanisms are discussed in terms of specific entrance-channel characteristics. (orig.)

  9. Integration of optical clearing and optical sectioning microscopy for three-dimensional imaging of natural biomaterial scaffolds in thin sections

    Science.gov (United States)

    Tseng, S.-Ja; Lee, Ying-Hui; Chen, Zhi-Hao; Lin, Hui-Hao; Lin, Chih-Yung; Tang, Shiue-Cheng

    2009-07-01

    The intrinsic turbidity of scaffolds formed by natural biomaterials such as collagen fibers prevents high-resolution light microscopy in depth. In this research, we have developed a new method of using light microscopy for penetrative three-dimensional (3-D) visualization of scaffolds formed by collagen, chitosan, or cellulose. First, we applied an optical-clearing solution, FocusClear, to permeate and reduce the turbidity of the scaffolds. The improved photon penetration allowed fluorophores for efficient excitation and emission in the FocusClear solution. Confocal microscopy was applied to achieve cellular-level resolution up to 350 μm for both the fibroblast/collagen and the osteoblast/chitosan constructs and micrometer-level resolution up to 40 μm for the cellulose membrane. The depth of imaging of the cellulose membrane was further improved to 80 μm using two-photon microscopy. Significantly, these voxel-based confocal/two-photon micrographs allowed postrecording image processing via Amira projection algorithms for 3-D visualization and analysis of the scanned region. Although this optical method remains limited in viewing block scaffolds in thin sections, our approach provides a noninvasive way to microscopically examine the scaffold structure, which would be a valuable tool to studying biomaterials and their interactions with the molecule/cell of interest within the scaffold in an integrated fashion.

  10. Preparation of cross sections of TiO2 thin films for TEM by ultramicrotomy

    International Nuclear Information System (INIS)

    Hu, W.; Bostrom, T.; Tesfamichael, T.; Bell, J.

    2002-01-01

    Full text: Considerable research is being carried out on dye-sensitised solar cells, the most extensively studied of which are based on a nanostructured titania semiconducting film deposited on a conducting glass substrate. The preparation of cross-sections of these films is essential for investigating of the shape, size and distribution of the TiO 2 particles by TEM. In the present work, we have used a relatively simple and rapid procedure involving ultramicrotomy to prepare cross-sections of the films for initial TEM examination. Titania thin films were produced by screen-printing a nanoparticle titania paste onto SnO 2 -coated glass substrates, followed by heating in air at 500 deg C for 1 hour. The nanoporous films are optically transparent, have a high surface area, and are 7 to 8 μm thick. The thickness could be checked with a confocal laser scanning microscope using x-z scans in reflection mode. The method for preparing cross-sections was adapted from one used with tissue culture cells on substrates, and which has also been employed with clay minerals. A BEEM capsule half filled with embedding resin was inverted over the glass substrate and TiO 2 film, so that the resin was in contact with the film. After polymerisation at 60 deg C overnight, the block was pried away from the glass using a single edged razor blade, leaving the titania film in the resin. The final height of block was about 4-5 mm, and could be directly fitted into an ultramicrotome chuck for sectioning without requiring re-embedding. Ultrathin 60-80 nm sections were cut with a diamond knife, collected on 200 mesh copper grids, then coated with carbon to stabilise the unsupported resin. The sections were examined at 200kV in a Philips CM200 TEM. It was found that the film had detached fully from the glass. The TiO 2 grains were observed as mixtures of tetrahedral and rhombohedral geometries with a size distribution in the range 10-25 nm. Anatase and brookite phases present could be identified

  11. Evaluation of mediastinal lymph node metastasis of lung cancer by thin-section computed tomography

    Energy Technology Data Exchange (ETDEWEB)

    Ishiwa, Naoki; Yamada, Kozo; Nakayama, Haruhiko [Kanagawa Cancer Center (Japan)] (and others)

    2000-10-01

    The aim of this study was to improve the predictive value of evaluation of mediastinal lymph nodes in lung cancer. We reviewed 110 patients with operable lung cancer, and compared preoperative thin-section CT findings and postoperative histo-pathological findings. The positive criteria for a CT diagnosis based on not only node size ({>=}10 mm), but external morphological evaluation (long axis

  12. Thin Versus Thick Description: Analyzing Representations of People and Their Life Worlds in the Literature of Communication Sciences and Disorders.

    Science.gov (United States)

    Hengst, Julie A; Devanga, Suma; Mosier, Hillary

    2015-11-01

    Evidence-based practice relies on clinicians to translate research evidence for individual clients. This study, the initial phase of a broader research project, examines the textual resources of such translations by analyzing how people with acquired cognitive-communication disorders (ACCD) and their life worlds have been represented in Communication Sciences and Disorders (CSD) research articles. Using textual analysis, we completed a categorical analysis of 6,059 articles published between 1936 and 2012, coding for genre, population, and any evidence of thick representations of people and their life worlds, and a discourse analysis of representations used in 56 ACCD research articles, identifying thin and thick representations in 4 domains (derived from the International Classification of Functioning, Disability, and Health) and across article sections. The categorical analysis identified a higher percentage of ACCD articles with some evidence of thick representation (30%) compared with all CSD articles (12%) sampled. However, discourse analysis of ACCD research articles found that thick representations were quite limited; 34/56 articles had thin representational profiles, 19/56 had mixed profiles, and 3/56 had thick profiles. These findings document the dominance of thin representations in the CSD literature, which we suggest makes translational work more difficult. How clinicians translate such evidence will be addressed in the next research phase, an interview study of speech-language pathologists.

  13. Atomic force microscopy imaging and 3-D reconstructions of serial thin sections of a single cell and its interior structures

    International Nuclear Information System (INIS)

    Chen Yong; Cai Jiye; Zhao Tao; Wang Chenxi; Dong Shuo; Luo Shuqian; Chen, Zheng W.

    2005-01-01

    The thin sectioning has been widely applied in electron microscopy (EM), and successfully used for an in situ observation of inner ultrastructure of cells. This powerful technique has recently been extended to the research field of atomic force microscopy (AFM). However, there have been no reports describing AFM imaging of serial thin sections and three-dimensional (3-D) reconstruction of cells and their inner structures. In the present study, we used AFM to scan serial thin sections approximately 60 nm thick of a mouse embryonic stem (ES) cell, and to observe the in situ inner ultrastructure including cell membrane, cytoplasm, mitochondria, nucleus membrane, and linear chromatin. The high-magnification AFM imaging of single mitochondria clearly demonstrated the outer membrane, inner boundary membrane and cristal membrane of mitochondria in the cellular compartment. Importantly, AFM imaging on six serial thin sections of a single mouse ES cell showed that mitochondria underwent sequential changes in the number, morphology and distribution. These nanoscale images allowed us to perform 3-D surface reconstruction of interested interior structures in cells. Based on the serial in situ images, 3-D models of morphological characteristics, numbers and distributions of interior structures of the single ES cells were validated and reconstructed. Our results suggest that the combined AFM and serial-thin-section technique is useful for the nanoscale imaging and 3-D reconstruction of single cells and their inner structures. This technique may facilitate studies of proliferating and differentiating stages of stem cells or somatic cells at a nanoscale

  14. Atomic force microscopy imaging and 3-D reconstructions of serial thin sections of a single cell and its interior structures

    Science.gov (United States)

    Chen, Yong; Cai, Jiye; Zhao, Tao; Wang, Chenxi; Dong, Shuo; Luo, Shuqian; Chen, Zheng W.

    2010-01-01

    The thin sectioning has been widely applied in electron microscopy (EM), and successfully used for an in situ observation of inner ultrastructure of cells. This powerful technique has recently been extended to the research field of atomic force microscopy (AFM). However, there have been no reports describing AFM imaging of serial thin sections and three-dimensional (3-D) reconstruction of cells and their inner structures. In the present study, we used AFM to scan serial thin sections approximately 60nm thick of a mouse embryonic stem (ES) cell, and to observe the in situ inner ultrastructure including cell membrane, cytoplasm, mitochondria, nucleus membrane, and linear chromatin. The high-magnification AFM imaging of single mitochondria clearly demonstrated the outer membrane, inner boundary membrane and cristal membrane of mitochondria in the cellular compartment. Importantly, AFM imaging on six serial thin sections of a single mouse ES cell showed that mitochondria underwent sequential changes in the number, morphology and distribution. These nanoscale images allowed us to perform 3-D surface reconstruction of interested interior structures in cells. Based on the serial in situ images, 3-D models of morphological characteristics, numbers and distributions of interior structures of the single ES cells were validated and reconstructed. Our results suggest that the combined AFM and serial-thin-section technique is useful for the nanoscale imaging and 3-D reconstruction of single cells and their inner structures. This technique may facilitate studies of proliferating and differentiating stages of stem cells or somatic cells at a nanoscale. PMID:15850704

  15. Vegetation description of the Doornhoek section of the Mountain Zebra National Park (MZNP, South Africa

    Directory of Open Access Journals (Sweden)

    Hugo Bezuidenhout

    2008-12-01

    Full Text Available The Mountain Zebra National Park (MZNP has been extended over the last couple of years. One of the newly procured areas is the Doornhoek section, which had been adjacent to the park. To develop scientifically sound management programmes for conservation areas, it is essential that an inventory of their natural resources be undertaken. The aim of this study was to classify, describe and map the vegetation of the Doornhoek section of the park. The floristic data were analysed in accordance with the Braun-Blanquet procedures using the BBPC suite. The data analysis resulted in the identification of eight communities, which can be grouped into seven major community types (Rhus lucida–Buddleja glomerata Shrubland, Rhigozum obovatum–Rhus longispina Shrubland, Helichrysum dregeanum–Aristida diffusa Grassland, Pentzia globosa–Enneapogon scoparius Grassland, Aristida adscensionus–Pentzia globosa Grassland, Cadaba aphylla–Acacia karroo Woodland and Lycium oxycarpum–Acacia karroo Woodland. Four of these communities occur on the higher-lying plateau, mid-slope and crest areas, while the other four communities are located on the lower-lying mid-plateau and foot slope, along drainage lines and in valley-bottom areas. The description of the plant communities, together with the vegetation map, can serve as a basis for formulating a management programme for the larger park. Although sections of Doornhoek have been overgrazed and degraded in the past, its recent addition to the MZNP contributes to the available habitat preferred by large herbivores, such as valley bottoms, foot-slopes and plateaux.

  16. Note on the hydrodynamic description of thin nematic films: Strong anchoring model

    KAUST Repository

    Lin, Te-Sheng

    2013-01-01

    We discuss the long-wave hydrodynamic model for a thin film of nematic liquid crystal in the limit of strong anchoring at the free surface and at the substrate. We rigorously clarify how the elastic energy enters the evolution equation for the film thickness in order to provide a solid basis for further investigation: several conflicting models exist in the literature that predict qualitatively different behaviour. We consolidate the various approaches and show that the long-wave model derived through an asymptotic expansion of the full nemato-hydrodynamic equations with consistent boundary conditions agrees with the model one obtains by employing a thermodynamically motivated gradient dynamics formulation based on an underlying free energy functional. As a result, we find that in the case of strong anchoring the elastic distortion energy is always stabilising. To support the discussion in the main part of the paper, an appendix gives the full derivation of the evolution equation for the film thickness via asymptotic expansion. © 2013 AIP Publishing LLC.

  17. Risk Factors for Developing Scoliosis in Cerebral Palsy: A Cross-Sectional Descriptive Study.

    Science.gov (United States)

    Bertoncelli, Carlo M; Solla, Federico; Loughenbury, Peter R; Tsirikos, Athanasios I; Bertoncelli, Domenico; Rampal, Virginie

    2017-06-01

    This study aims to identify the risk factors leading to the development of severe scoliosis among children with cerebral palsy. A cross-sectional descriptive study of 70 children (aged 12-18 years) with severe spastic and/or dystonic cerebral palsy treated in a single specialist unit is described. Statistical analysis included Fisher exact test and logistic regression analysis to identify risk factors. Severe scoliosis is more likely to occur in patients with intractable epilepsy ( P = .008), poor gross motor functional assessment scores ( P = .018), limb spasticity ( P = .045), a history of previous hip surgery ( P = .048), and nonambulatory patients ( P = .013). Logistic regression model confirms the major risk factors are previous hip surgery ( P = .001), moderate to severe epilepsy ( P = .007), and female gender ( P = .03). History of previous hip surgery, intractable epilepsy, and female gender are predictors of developing severe scoliosis in children with cerebral palsy. This knowledge should aid in the early diagnosis of scoliosis and timely referral to specialist services.

  18. Quality of sleep and selective attention in university students: descriptive cross-sectional study

    Directory of Open Access Journals (Sweden)

    Silvia Alicia Fontana

    2014-09-01

    Full Text Available INTRODUCTION Sleep quality not only refers to sleeping well at night, but also includes appropriate daytime functioning. Poor quality of sleep can affect a variety of attention processes. PURPOSE The aim of this investigation was to evaluate the relationship between the perceived quality of sleep and selective focus in a group of college students. METHODS A descriptive cross-sectional study was carried out in a group of 52 Argentinian college students of the Universidad Adventista del Plata. The Pittsburgh Sleep Quality Index, the Continuous Performance Test and the Trail Making Test were applied. RESULTS The main results indicate that students sleep an average of 6.48 hours. Generally half of the population tested had a good quality of sleep. However, the dispersion seen in some components demonstrates the heterogeneity of the sample in these variables. It was observed that the evaluated attention processes yielded different levels of alteration in the total sample: major variability in the process of process and in the divided-attention processes were detected. A lower percentage of alteration was observed in the process of attention support. CONCLUSION Poor quality of sleep has more impact in the sub processes with greater participation of corticocortical circuits (selective and divided attention and greater involvement of the prefrontal cortex. Fewer difficulties were found in the attention-support processes that rely on subcortical regions and have less frontal involvement.

  19. Knowledge and attitude of Indian dentists regarding dental stem cells: A cross-sectional descriptive survey

    Directory of Open Access Journals (Sweden)

    Farhin Katge

    2017-01-01

    Full Text Available Background: Dental stem cells derived from tooth structures are adult stem cells that have received attention of researchers over the past decade. Dental stem cells can be used to regenerate dental tissues as well as non dental organs. These dental stem cells are readily accessible as compared to other sources of stem cells and can be obtained and stored for future use through minimally invasive procedures. Research in this field is growing at a fast pace and it is essential that awareness regarding the same should be present amongst professionals. Aim: This study was carried out to assess the knowledge and attitude of Indian dentists regarding dental stem cells. Material and Methods: A cross sectional descriptive, questionnaire based survey based on Knowledge, Attitude and Practice (KAP was conducted and a total of 823 dentists from Maharashtra, India participated in the survey. The Pearson's Chi-Square Test and percentages of the total were used for statistical analysis. Results and Conclusion: A total of 823 dentists completed the questionnaire survey; out of which 396 were male and 427 were female. Maximum respondents (53% were dental graduates, followed by post graduates (45% and PhD (1.7%. Data from the study revealed that there is good awareness regarding stem cells in general. However; the awareness, knowledge regarding sources, applications, uses and clinical research guidelines regarding dental stem cells is lacking amongst most dentists. Despite this lack of knowledge, dentists are keen on updating their knowledge regarding dental stem cells.

  20. Knowledge and attitude of Indian dentists regarding dental stem cells: A cross-sectional descriptive survey.

    Science.gov (United States)

    Katge, Farhin; Shetty, Ashveeta J; Rusawat, Bhavesh; Vamsi, K C

    2017-01-01

    Dental stem cells derived from tooth structures are adult stem cells that have received attention of researchers over the past decade. Dental stem cells can be used to regenerate dental tissues as well as non dental organs. These dental stem cells are readily accessible as compared to other sources of stem cells and can be obtained and stored for future use through minimally invasive procedures. Research in this field is growing at a fast pace and it is essential that awareness regarding the same should be present amongst professionals. This study was carried out to assess the knowledge and attitude of Indian dentists regarding dental stem cells. A cross sectional descriptive, questionnaire based survey based on Knowledge, Attitude and Practice (KAP) was conducted and a total of 823 dentists from Maharashtra, India participated in the survey. The Pearson's Chi-Square Test and percentages of the total were used for statistical analysis. A total of 823 dentists completed the questionnaire survey; out of which 396 were male and 427 were female. Maximum respondents (53%) were dental graduates, followed by post graduates (45%) and PhD (1.7%). Data from the study revealed that there is good awareness regarding stem cells in general. However; the awareness, knowledge regarding sources, applications, uses and clinical research guidelines regarding dental stem cells is lacking amongst most dentists. Despite this lack of knowledge, dentists are keen on updating their knowledge regarding dental stem cells.

  1. [Quality of sleep and selective attention in university students: descriptive cross-sectional study].

    Science.gov (United States)

    Fontana, Silvia Alicia; Raimondi, Waldina; Rizzo, María Laura

    2014-09-05

    Sleep quality not only refers to sleeping well at night, but also includes appropriate daytime functioning. Poor quality of sleep can affect a variety of attention processes. The aim of this investigation was to evaluate the relationship between the perceived quality of sleep and selective focus in a group of college students. A descriptive cross-sectional study was carried out in a group of 52 Argentinian college students of the Universidad Adventista del Plata. The Pittsburgh Sleep Quality Index, the Continuous Performance Test and the Trail Making Test were applied. The main results indicate that students sleep an average of 6.48 hours. Generally half of the population tested had a good quality of sleep. However, the dispersion seen in some components demonstrates the heterogeneity of the sample in these variables. It was observed that the evaluated attention processes yielded different levels of alteration in the total sample: major variability in the process of process and in the divided-attention processes were detected. A lower percentage of alteration was observed in the process of attention support. Poor quality of sleep has more impact in the sub processes with greater participation of corticocortical circuits (selective and divided attention) and greater involvement of the prefrontal cortex. Fewer difficulties were found in the attention-support processes that rely on subcortical regions and have less frontal involvement.

  2. Optimization of PIXE-sensitivity for detection of Ti in thin human skin sections

    Science.gov (United States)

    Pallon, Jan; Garmer, Mats; Auzelyte, Vaida; Elfman, Mikael; Kristiansson, Per; Malmqvist, Klas; Nilsson, Christer; Shariff, Asad; Wegdén, Marie

    2005-04-01

    Modern sunscreens contain particles like TiO2 having sizes of 25-70 nm and acting as a reflecting substance. For cosmetic reasons the particle size is minimized. Questions have been raised to what degree these nano particles penetrate the skin barrier, and how they do affect the human. The EU funded project "Quality of skin as a barrier to ultra-fine particles" - NANODERM has started with the purpose to evaluate the possible risks of TiO2 penetration into vital skin layers. The purpose of the work presented here was to find the optimal conditions for micro-PIXE analysis of Ti in thin skin sections. In the skin region where Ti is expected to be found, the naturally occurring major elements phosphorus, chlorine, sulphur and potassium have steep gradients and thus influence the X-ray background in a non-predictable manner. Based on experimental studies of Ti-exposed human skin sections using proton energies ranging from 1.8-2.55 MeV, the corresponding PIXE detection limits for Ti were calculated. The energy that was found to be the most favourable, 1.9 MeV, was then selected for future studies.

  3. Job satisfaction and turnover intention among Iraqi doctors--a descriptive cross-sectional multicentre study.

    Science.gov (United States)

    Ali Jadoo, Saad Ahmed; Aljunid, Syed Mohamed; Dastan, Ilker; Tawfeeq, Ruqiya Subhi; Mustafa, Mustafa Ali; Ganasegeran, Kurubaran; AlDubai, Sami Abdo Radman

    2015-04-19

    During the last two decades, the Iraqi human resources for health was exposed to an unprecedented turnover of trained and experienced medical professionals. This study aimed to explore prominent factors affecting turnover intentions among Iraqi doctors. A descriptive cross-sectional multicentre study was carried out among 576 doctors across 20 hospitals in Iraq using multistage sampling technique. Participants completed a self-administered questionnaire, which included socio-demographic information, work characteristics, the 10-item Warr-Cook-Wall job satisfaction scale, and one question on turnover intention. Descriptive and bivariate and multiple logistic regression analyses were conducted to identify significant factors affecting turnover intentions. More than one half of Iraqi doctors (55.2%) were actively seeking alternative employment. Factors associated with turnover intentions among doctors were low job satisfaction score (odds ratio (OR) = 0.97; 95% confidence interval (CI): 0.95, 0.99), aged 40 years old or less (OR = 2.9; 95% CI: 1.74, 4.75), being male (OR = 4.2; 95% CI: 2.54, 7.03), being single (OR = 5.0; 95% CI: 2.61, 9.75), being threatened (OR = 3.5; 95% CI: 1.80, 6.69), internally displaced (OR = 3.1; 95% CI: 1.43, 6.57), having a perception of unsafe medical practice (OR = 4.1; 95% CI: 1.86, 9.21), working more than 40 h per week, (OR = 2.3; 95% CI: 1.27, 4.03), disagreement with the way manager handles staff (OR = 2.2; 95% CI: 1.19, 4.03), being non-specialist, (OR = 3.9, 95% CI: 2.08, 7.13), and being employed in the government sector only (OR = 2.0; 95% CI: 1.09, 3.82). The high-turnover intention among Iraqi doctors is significantly associated with working and security conditions. An urgent and effective strategy is required to prevent doctors' exodus.

  4. Bronchiolitis obliterans syndrome: thin-section CT diagnosis of obstructive changes in infants and young children after lung transplantation.

    Science.gov (United States)

    Lau, D M; Siegel, M J; Hildebolt, C F; Cohen, A H

    1998-09-01

    To characterize the thin-section computed tomographic (CT) appearance of bronchiolitis fibrosa obliterans syndrome in infants and young children after lung transplantation. Thin-section CT studies in six patients with bronchiolitis obliterans syndrome (age range, 2 months to 5 1/2 years) and in 15 control patients without obstructive airway disease (age range, 2 months to 7 years) who underwent bilateral lung transplantation were retrospectively reviewed. The thin-section CT scans were obtained during quiet sleep at a median of 24 months (range, 6-36 months) after transplantation. The CT studies were evaluated for mosaic perfusion, bronchial dilatation, bronchial wall thickening, and mucous plugging Final diagnoses in all patients were based pulmonary function test results. Thin-section CT findings in the six patients with clinically proved bronchiolitis obliterans syndrome were mosaic perfusion in five (83%) bronchial dilation in three (50%), and bronchial wall thickening in one (17%). Of the 15 control patients with normal pulmonary function test results, six (40%) had mosaic perfusion; none had bronchial dilatation or bronchial wall thickening. Mucous plugging was not seen in either group. Only the association of bronchial dilatation with bronchiolitis obliterans syndrome was significant (P = .02). Infants and young children with bronchiolitis obliterans syndrome after lung transplantation are more likely to have CT abnormalities than those with normal pulmonary function test results.

  5. Disseminated dendriform pulmonary ossification associated with usual interstitial pneumonia: incidence and thin-section CT-pathologic correlation

    International Nuclear Information System (INIS)

    Kim, Tae Sung; Chung, Myung Jin; Han, Joungho; Chung, Man Pyo; Choi, Yong Soo

    2005-01-01

    The aim of this work was to assess the incidence of disseminated pulmonary dendriform ossification in usual interstitial pneumonia and nonspecific interstitial pneumonia, and to correlate thin-section computed tomography (CT) and histopathologic findings. We retrospectively reviewed thin-section CT and pathologic specimens of biopsy-proven usual interstitial pneumonia (75 patients, 57 men and 18 women, mean age 60 years, range 29-83 years) and nonspecific interstitial pneumonia (44 patients, 9 men and 35 women, mean age 55 years, range 20-73 years). On review of CT and histopathologic specimens, diffuse dendriform ossification was identified in five (four men and one woman, age range 41-68 years, mean 58 years) of 75 patients (6.7%) with usual interstitial pneumonia. It was not seen in any of 44 patients with nonspecific interstitial pneumonia. With thin-section CT (osteoporosis window; window width 818, level 273), disseminated dendriform pulmonary ossification was detected as multiple tiny calcifications in bibasilar subpleural lungs (100% sensitive and 100% specific when compared with histopathologic findings as the gold standard). The thin-section CT finding of multiple tiny calcifications in bibasilar subpleural lungs might be of some help in the differential diagnosis between usual interstitial pneumonia and nonspecific interstitial pneumonia, considering they were not seen in any patients with nonspecific interstitial pneumonia (0%, 0/44) in our series. (orig.)

  6. Comparative Study of Thin Sectional Anatomical Images from Chinese Visible Human Data Set and Computed Tomography Images of Superior Mediastinum

    NARCIS (Netherlands)

    Wu, Yi; Luo, Na; Tan, Li-Wen; Fang, Bing-Ji; Li, Ying; Xie, Bing; Xu, Hao-Tong; Hu, Nan; Yang, Wei-Ping; Wu, Wei; Lamers, Wouter H.; Zhang, Shao-Xiang

    2012-01-01

    The structures of superior mediastinum and their spatial relationships are complex and difficult to master. This study aimed to compare visualization of the superior mediastinum based on computed tomography (CT) images and on the thin sections of the Chinese visible human (CVH) data set to provide a

  7. Indirect Fabrication of Lattice Metals with Thin Sections Using Centrifugal Casting.

    Science.gov (United States)

    Mun, Jiwon; Ju, Jaehyung; Thurman, James

    2016-05-14

    One of the typical methods to manufacture 3D lattice metals is the direct-metal additive manufacturing (AM) process such as Selective Laser Melting (SLM) and Electron Beam Melting (EBM). In spite of its potential processing capability, the direct AM method has several disadvantages such as high cost, poor surface finish of final products, limitation in material selection, high thermal stress, and anisotropic properties of parts. We propose a cost-effective method to manufacture 3D lattice metals. The objective of this study is to provide a detailed protocol on fabrication of 3D lattice metals having a complex shape and a thin wall thickness; e.g., octet truss made of Al and Cu alloys having a unit cell length of 5 mm and a cell wall thickness of 0.5 mm. An overall experimental procedure is divided into eight sections: (a) 3D printing of sacrificial patterns (b) melt-out of support materials (c) removal of residue of support materials (d) pattern assembly (e) investment (f) burn-out of sacrificial patterns (g) centrifugal casting (h) post-processing for final products. The suggested indirect AM technique provides the potential to manufacture ultra-lightweight lattice metals; e.g., lattice structures with Al alloys. It appears that the process parameters should be properly controlled depending on materials and lattice geometry, observing the final products of octet truss metals by the indirect AM technique.

  8. Two-photon absorption cross section of magnetite nanoparticles in magnetic colloids and thin films

    Science.gov (United States)

    Espinosa, D.; Gonçalves, E. S.; Figueiredo Neto, A. M.

    2017-01-01

    We present z-scan measurements of magnetic nanoparticles made from magnetite in both thin film form and colloidal solutions. In order to avoid heating and, thus, spurious effects that could lead to misinterpretation of the z-scan results, an electro-mechanical shutter was added along the beam path in order to guarantee samples thermal relaxation. Two photon absorption coefficient β and nonlinear refractive index n2 were measured as a function of concentration N of absorbing units (Fe3O4). Our magnetite samples presented n 2 ≈ - 1.5 × 10 - 14 cm 2 / W , similar to that of the liquid carrier, for concentrations below 2 × 10 20 cm - 3 . n2 increases, in absolute value, to about - 10 × 10 - 14 cm 2 / W for a sample three times more concentrated and then decreases with N until about - 7 × 10 - 14 cm 2 / W for the most concentrated sample. β presented a linear dependence with N and the two-photon absorption cross section σ 2 PA was calculated, resulting in σ 2 PA = 50 ( 2 ) GM for magnetite nanoparticles.

  9. Application of synchrotron through-the-substrate microdiffraction to crystals in polished thin sections

    Directory of Open Access Journals (Sweden)

    Jordi Rius

    2015-07-01

    Full Text Available The synchrotron through-the-substrate X-ray microdiffraction technique (tts-μXRD is extended to the structural study of microvolumes of crystals embedded in polished thin sections of compact materials [Rius, Labrador, Crespi, Frontera, Vallcorba & Melgarejo (2011. J.Synchrotron Rad. 18, 891–898]. The resulting tts-μXRD procedure includes some basic steps: (i collection of a limited number of consecutive two-dimensional patterns (frames for each randomly oriented crystal microvolume; (ii refinement of the metric from the one-dimensional diffraction pattern which results from circularly averaging the sum of collected frames; (iii determination of the reciprocal lattice orientation of each randomly oriented crystal microvolume which allows assigning the hkl indices to the spots and, consequently, merging the intensities of the different frames into a single-crystal data set (frame merging; and (iv merging of the individual crystal data sets (multicrystal merging to produce an extended data set suitable for structure refinement/solution. Its viability for crystal structure solution by Patterson function direct methods (δ recycling and for accurate single-crystal least-squares refinements is demonstrated with some representative examples from petrology in which different glass substrate thicknesses have been employed. The section of the crystal microvolume must be at least of the same order of magnitude as the focus of the beam (15 × 15 µm in the provided examples. Thanks to its versatility and experimental simplicity, this methodology should be useful for disciplines as disparate as petrology, materials science and cultural heritage.

  10. Differentiation of bacterial and non-bacterial community-acquired pneumonia by thin-section computed tomography

    International Nuclear Information System (INIS)

    Ito, Isao; Ishida, Tadashi; Togashi, Kaori; Niimi, Akio; Koyama, Hiroshi; Ishimori, Takayoshi; Kobayashi, Hisataka; Mishima, Michiaki

    2009-01-01

    Background and objective: The management of community-acquired pneumonia (CAP) depends, in part, on the identification of the causative agents. The objective of this study was to determine the potential of thin-section computed tomography (CT) in differentiating bacterial and non-bacterial pneumonia. Patients and methods: Thin-section CT studies were prospectively examined in hospitalized CAP patients within 2 days of admission, followed by retrospective assessment by two pulmonary radiologists. Thin-section CT findings on the pneumonias caused by each pathogen were examined, and two types of pneumonias were compared. Using multivariate logistic regression analyses, receiver operating characteristic (ROC) curves were produced. Results: Among 183 CAP episodes (181 patients, 125 men and 56 women, mean age ± S.D.: 61.1 ± 19.7) examined by thin-section CT, the etiologies of 125 were confirmed (94 bacterial pneumonia and 31 non-bacterial pneumonia). Centrilobular nodules were specific for non-bacterial pneumonia and airspace nodules were specific for bacterial pneumonia (specificities of 89% and 94%, respectively) when located in the outer lung areas. When centrilobular nodules were the principal finding, they were specific but lacked sensitivity for non-bacterial pneumonia (specificity 98% and sensitivity 23%). To distinguish the two types of pneumonias, centrilobular nodules, airspace nodules and lobular shadows were found to be important by multivariate analyses. ROC curve analysis discriminated bacterial pneumonia from non-bacterial pneumonia among patients without underlying lung diseases, yielding an optimal point with sensitivity and specificity of 86% and 79%, respectively, but was less effective when all patients were analyzed together (70% and 84%, respectively). Conclusion: Thin-section CT examination was applied for the differentiation of bacterial and non-bacterial pneumonias. Though showing some potential, this examination at the present time would not

  11. Notes on the genus Psathyrella-VIII. Description of and key to the European species of section Hydrophilae

    NARCIS (Netherlands)

    Kits van Waveren, E.

    1982-01-01

    A description of and key to twelve species of Psathyrella section Hydrophilea (Romagn.) ex Sing. emend. Kits van Wav. is given. These species are: P. hydrophila, P. hydrophiloides (spec. nov., = Drosophila pilulaeformis ss. Kühn. & Romagn.), P. laevissima, P. subpapillata (comb. nov.), P. fragrans

  12. Global description of (n,p) - and (n,2n) - activation cross sections within statistical multistep theory

    International Nuclear Information System (INIS)

    Kalka, H.; Torjman, M.; Seeliger, D.; Lopez, R.

    1989-07-01

    A unique description of (n,p) and (n,2n) activation cross sections as well as emission spectra is proposed within a pure multistep approach. Calculations are presented for 8 nuclei (A=47...65) in the incident energy range from zero up to 20 MeV. (author). 42 refs, 5 figs, 1 tab

  13. Breast cancer screening practices of African migrant women in Australia: a descriptive cross-sectional study.

    Science.gov (United States)

    Ogunsiji, Olayide Oluyemisi; Kwok, Cannas; Fan, Lee Chun

    2017-04-17

    Breast cancer is the most diagnosed cancer among women and a leading cause of mortality and morbidity, globally. Breast cancer mortality can be improved through routine cancer screening, yet migrant populations have lower participation rates. While African migrants are among the fastest growing migrant population in Australia, their breast cancer screening behaviour is under-studied. The aims of this study were to report breast cancer screening status of African migrant women and factors associated with their breast cancer screening behaviour in Australia. A descriptive, cross-sectional approach was utilised for this study. Two hundred and sixty four African migrant women aged 18-69 years and recruited from a number of organisations responded to a self-reported African version of the Breast Cancer Screening Beliefs Questionnaire (BCSBQ). Main research variables are breast cancer screening practices and demographic characteristics and total scores on each of the BCSBQ subscales. Multivariable logistic regression analyses were performed to investigate the impact of the demographic variables on the likelihood of women in the target age range 50-74 years having screening practices as recommended. While most of the participants heard of breast awareness (76.1%) and mammogram (85.2%), only 11.4% practised monthly breast awareness, whereas 65.9% had ever had a mammogram as frequently as recommended. Age and employment were determining factors for participating in mammogram. Significant different scores were found in the "Practical barriers" between women at the target age who had and had not performed breast awareness (80.4 versus 77.5, p-value = 0.002) and mammogram (77.1 versus 70.3, p-value = 0.009) regularly as recommended. Moreover, attitudes towards general health check-ups subscale scores were significantly higher in women who had performed clinical breast examination as frequently as recommended than those who had not. The research reveals that practical

  14. Vulnerability of caregivers of the elderly with dementia: a cross-sectional descriptive study.

    Science.gov (United States)

    Leite, Bruna Silva; Camacho, Alessandra Conceição Leite Funchal; Joaquim, Fabiana Lopes; Gurgel, Jonas Lírio; Lima, Thiago Rodrigues; Queiroz, Raquel Santos de

    2017-01-01

    to evaluate the sociodemographic and clinical profile of the caregivers and its relation with the overburden from the care of the elderly with dementia. a cross-sectional descriptive study; the sample was non-probabilistic, developed with caregivers of elderly people with dementia. The field of investigation was the Health Care Center of the Elderly and their Caregivers (CASIC), in the city of Niterói, Rio de Janeiro, Brazil. Data collection took place from February to June 2016, with the following instruments: a sociodemographic questionnaire and Zarit scale. fifty percent of the caregivers presented moderate overburden; 38% presented little overburden; and 12% moderate/severe overburden. It was observed that the median of weekly care hours increases as the overburden increases. Caregivers with moderate to severe overburden, in the majority, do not share care. it is clear that the overburden of care places the caregiver in conditions of biological and psychological vulnerability. avaliar o perfil sociodemográfico e clínico dos cuidadores e sua relação com a sobrecarga proveniente do cuidado ao idoso com demência. estudo descritivo transversal, a amostra foi do tipo não probabilística, desenvolvida com os cuidadores de idosos com demência. O campo de investigação foi o Centro de Atenção à Saúde do Idoso e seus Cuidadores (CASIC), Niterói, Rio de Janeiro, Brasil. A coleta de dados ocorreu de fevereiro a junho de 2016, com os seguintes instrumentos: questionário sociodemográfico e escala de Zarit. 50% dos cuidadores apresentaram sobrecarga moderada, 38% apresentaram pouca sobrecarga e 12%, sobrecarga moderada/severa. Observou-se que a mediana das horas de cuidados semanais aumenta conforme a sobrecarga aumenta. Cuidadores com sobrecarga de moderada a severa, em caráter majoritário, não dividem o cuidado. Dessa forma, fica claro que a sobrecarga do cuidado coloca o cuidador em condições de vulnerabilidade biológica e psicológica.

  15. Thin-section CT imaging that correlates with pulmonary function tests in obstructive airway disease

    Energy Technology Data Exchange (ETDEWEB)

    Arakawa, Hiroaki, E-mail: arakawa@dokkyomed.ac.jp [Department of Radiology, Dokkyo Medical University, 880 Kita-Kobayashi, Mibu, Tochigi 321-0293 (Japan); Fujimoto, Kiminori [Department of Radiology, Kurume University School of Medicine (Japan); Fukushima, Yasutugu [Department of Pulmonary Medicine and Clinical Immunology, Dokkyo Medical University (Japan); Kaji, Yasushi [Department of Radiology, Dokkyo Medical University, 880 Kita-Kobayashi, Mibu, Tochigi 321-0293 (Japan)

    2011-11-15

    Purpose: The purpose of this study was to identify independent CT findings that correlated with pulmonary function tests (PFTs) in patients with obstructive airway diseases. Materials and methods: Sixty-eight patients with obstructive airway disease and 29 normal subjects (mean age, 52 years; 36 men and 61 women) underwent inspiratory and expiratory thin-section CT and PFTs. Patient with obvious emphysema was excluded. Two radiologists independently reviewed the images and semi-quantitatively evaluated lung attenuation (mosaic perfusion, air trapping) and airway abnormalities (extent and severity of bronchial wall thickening and bronchiectasis, bronchiolectasis or centrilobular nodules, mucous plugging). Univariate, multivariate and receiver operating characteristic (ROC) analyses were performed with CT findings and PFTs. Results: Forty-two patients showed obstructive PFTs, 26 symptomatic patients showed near-normal PFTs. On univariate analysis, air trapping and bronchial wall thickening showed highest correlation with obstructive PFTs such as FEV1.0/FVC, MMEF and FEF75 (r ranged from -0.712 to -0.782; p < 0.001), while mosaic perfusion and mucous plugging showed moderate correlation, and bronchiectasis, bronchiolectasis and nodules showed the least, but significant, correlation. Multiple logistic analyses revealed air trapping and bronchial wall thickening as the only significant independent determinants of obstructive PFTs. ROC analysis revealed the cut-off value of air trapping for obstructive PFTs to be one-third of whole lung (area under curve, 0.847). Conclusions: Our study confirmed air trapping and bronchial wall thickening are the most important observations when imaging obstructive PFTs. The cut-off value of air trapping for identifying obstructive PFTs was one-third of lung irrespective of inspiratory CT findings.

  16. Prevalence of 'high-riding' superior pericardial recesses on thin-section 16-MDCT scans

    Energy Technology Data Exchange (ETDEWEB)

    Basile, Antonio [Department of Radiology and Interventional Radiology, Ospedale Ferrarotto, via Citelli, 8 95124 Catania (Italy)]. E-mail: antodoc@yahoo.com; Bisceglie, Paola [Department of Radiology and Interventional Radiology, Ospedale Ferrarotto, via Citelli, 8 95124 Catania (Italy); Giulietti, Giorgio [Department of Radiology and Interventional Radiology, Ospedale Ferrarotto, via Citelli, 8 95124 Catania (Italy); Calcara, Giacomo [Department of Radiology and Interventional Radiology, Ospedale Ferrarotto, via Citelli, 8 95124 Catania (Italy); Figuera, Michele [Department of Radiology, Ospedale Vittorio Emanuele, Via Plebiscito 628, 95124 Catania (Italy); Mundo, Elena [Department of Radiology and Interventional Radiology, Ospedale Ferrarotto, via Citelli, 8 95124 Catania (Italy); Granata, Antonio [Department of Nephrology, Ospedale Vittorio Emanuele, Via Plebiscito 628, 95124 Catania (Italy); Runza, Giuseppe [Department of Radiology, Policlinico Universitario, Via del Vespro 129, 90127 Palermo (Italy); Privitera, Carmelo [Department of Radiology, Ospedale Vittorio Emanuele, Via Plebiscito 628, 95124 Catania (Italy); Privitera, Giambattista [Department of Radiology and Interventional Radiology, Ospedale Ferrarotto, via Citelli, 8 95124 Catania (Italy); Patti, Maria Teresa [Department of Radiology and Interventional Radiology, Ospedale Ferrarotto, via Citelli, 8 95124 Catania (Italy)

    2006-08-15

    Objective: The aim of this study was to evaluate the prevalence of 'high-riding' superior pericardial recess (HRSPR) on thin-section (1 mm) 16-multidetector computed tomography (MDCT) scans. Materials and methods: Three hundred and fourteen consecutive chest CT scans obtained with a thin-section 16 MDCT were retrospectively evaluated. The prevalence and characteristic of HRSPR were analyzed. Results: HRSPR was depicted in 21 patients (11 men and 10 women) (6.6%) who ranged in age from 28 to 72 years (mean age, 57 years). The extended recesses were rounded/oval shaped in five patients and triangular, spindle, half moon or irregular shaped in the other 16 patients. Conclusion: Our data suggest as HRSPRs are more frequently and better depicted on thinsection MDCT scans, and this improves the capability to distinguish this superior extension of the superior aortic recess from abnormal findings such as lymphadenopathy, cystic lesions, and aortic dissection.

  17. Contrasting Nature of Magnetic Anomalies over Thin Sections Made out of Barrandien’s Basaltic Rocks Points to their Origin

    Czech Academy of Sciences Publication Activity Database

    Kletetschka, Günther; Pruner, Petr; Schnabl, Petr; Šifnerová, Kristýna

    -, special issue (2012), s. 69-70 ISSN 1335-2806. [Castle meeting New Trends in Geomagnetism : Paleo, rock and environmental magnetism/13./. 17.06.2012-23.06.2012, Zvolen] R&D Projects: GA ČR GAP210/10/2351 Institutional support: RVO:67985831 Keywords : magnetic anomalies * thin sections * volcanic rocks Subject RIV: DE - Earth Magnetism, Geodesy, Geography http://gauss.savba.sk/GPIweb/conferences/Castle2012/abstrCastle.pdf

  18. Thinness among preschool children residing in rural area: A cross-sectional study

    Directory of Open Access Journals (Sweden)

    Rakesh K Nayak

    2015-01-01

    Full Text Available Introduction: The legacy of malnutrition especially among preschool children is a huge obstacle to overall national development. India is home to more than one-third of the world′s under-nourished children. While there is global acceptance that body mass index (BMI should be used for assessment of obesity/adiposity in children, there has not been a similar consensus regarding use of BMI for assessment of under-nutrition in children. Materials and Methods: The present study was a community-based cross-sectional study carried out in a primary health center between January and December 2011. Study population comprised of 697 children aged between 2 and 5 years. Weight (kg and height (cm measurements were taken on each subject, and BMI was computed. Nutritional status was evaluated using the Cole′s age- and sex-specific cut-off points of BMI. One-way ANOVA (F-test was performed to test for age differences in means of weight, height, and BMI using SPSS statistical package. Results: A total of 339 boys and 358 females were studied. Result showed that age-combined prevalence of under-nutrition (Grades I, II, and III combined among boys and girls was 63.4% and 58.6% respectively with an overall prevalence of 61.7%. There were significant mean differences between ages among boys in weight (F = 4.160; P < 0.001 and height (F = 6.502; P < 0.001. However, no significant mean differences between ages for BMI (F = 1.098; P = 0.295. Similar findings were seen among girls where in significant differences were observed in weight (F = 3.125, P < 0.001 and height (F = 6.895; P < 0.001 but not with BMI (F = 1.091; P = 0.311. Conclusion: Our study provided evidence that these children were under acute and chronic nutritional stress in the form of thinness.

  19. Static and free-vibrational response of semi-circular graphite-epoxy frames with thin-walled open sections

    Science.gov (United States)

    Collins, J. Scott; Johnson, Eric R.

    1989-01-01

    Experiments were conducted to measure the three-dimensional static and free vibrational response of two graphite-epoxy, thin-walled, open section frames. The frames are semi-circular with a radius of three feet, and one specimen has an I cross section and the other has a channel cross section. The flexibility influence coefficients were measured in static tests for loads applied at midspan with the ends of the specimens clamped. Natural frequencies and modes were determined from vibrational tests for free and clamped end conditions. The experimental data is used to evaluate a new finite element which was developed specifically for the analysis of curved, thin-walled structures. The formulation of the element is based on a Vlasov-type, thin-walled, curved beam theory. The predictions from the finite element program generally correlated well with the experimental data for the symmetric I-specimen. Discrepancies in some of the data were found to be due to flexibility in the clamped end conditions. With respect to the data for the channel specimen, the correlation was less satisfactory. The finite element analysis predicted the out-of-plane response of the channel specimen reasonably well, but large discrepancies occurred between the predicted in-plane response and the experimental data. The analysis predicted a much more compliant in-plane response than was observed in the experiments.

  20. Middle ear structures in the Permian Glanosuchus sp. (Therocephalia, Therapsida, based on thin sections

    Directory of Open Access Journals (Sweden)

    W. Maier

    2002-01-01

    Full Text Available Transverse sections of the skull of the Permian therocephalian Glanosuchus sp. were studied with regard to the structures of the middle ear region. It is generally accepted that most of the skeletal elements of the mammalian middle ear are derived from the postdentary bones of the lower jaw. During synapsid evolution there is a gradual transition from a primitive amniote condition to derived mammalian condition; the latter is characterized by the decoupling of the remaining middle ear elements (angular, prearticular, articular from the dentary, which forms a secondary jaw articulation with the squamosal. Morganucodon from the Triassic-Jurassic boundary represents an evolutionary stage, where both jaw articulations are present in a coaxial position and where the primary joint is a Pready a fully effective sound transmitter. Therocephalians are considered to be a good representation of the transitory state of this evolutionary process; this may be especially true for primitive taxa such as the lycosuchid Glanosuchus, whose anatomy may represent the "groundplan" (ancestral morphotype of Lower to Middle Permian eutheriodonts. We studied a complete sectional series of a young specimen of Glanosuchus sp. prepared using the grind-and peel-technique. This showed that the reflected lamina of Glanosuchus is in major parts an extremely thin bony plate, which is best interpreted as a sound-receiving element overlying an air-filled recessus of the pharynx. In this specimen, the vestibular foramen and the stapes are preserved in situ; it is likely, however, that both structures were framed by cartilage which fixed the anular ligament. Both the stapes and the quadrate process of the pterygoid are in direct contact with the quadrate. Comparison of the area of the reflected lamina and the vestibular foramen shows that impedance matching was still very ineffective in Therocephalia when compared to extant mammals. In dieser Arbeit wurden Transversalschnitte des

  1. Digital quantification of fibrosis in liver biopsy sections: description of a new method by Photoshop software.

    Science.gov (United States)

    Dahab, Gamal M; Kheriza, Mohamed M; El-Beltagi, Hussien M; Fouda, Abdel-Motaal M; El-Din, Osama A Sharaf

    2004-01-01

    The precise quantification of fibrous tissue in liver biopsy sections is extremely important in the classification, diagnosis and grading of chronic liver disease, as well as in evaluating the response to antifibrotic therapy. Because the recently described methods of digital image analysis of fibrosis in liver biopsy sections have major flaws, including the use of out-dated techniques in image processing, inadequate precision and inability to detect and quantify perisinusoidal fibrosis, we developed a new technique in computerized image analysis of liver biopsy sections based on Adobe Photoshop software. We prepared an experimental model of liver fibrosis involving treatment of rats with oral CCl4 for 6 weeks. After staining liver sections with Masson's trichrome, a series of computer operations were performed including (i) reconstitution of seamless widefield images from a number of acquired fields of liver sections; (ii) image size and solution adjustment; (iii) color correction; (iv) digital selection of a specified color range representing all fibrous tissue in the image and; (v) extraction and calculation. This technique is fully computerized with no manual interference at any step, and thus could be very reliable for objectively quantifying any pattern of fibrosis in liver biopsy sections and in assessing the response to antifibrotic therapy. It could also be a valuable tool in the precise assessment of antifibrotic therapy to other tissue regardless of the pattern of tissue or fibrosis.

  2. A reappraisal of Aspergillus section Nidulantes with descriptions of two new sterigmatocystin-producing species

    DEFF Research Database (Denmark)

    Hubka, Vit; Nováková, Alena; Peterson, Stephen W.

    2016-01-01

    that codon usage analysis can easily distinguish between these paralogues, and we provide primer pair options to allow benA amplifications. Two new sect. Nidulantes species are described from European caves, A. croceus (Spain) and A. askiburgiensis (Czech Republic). The analysis of exometabolites showed......Aspergillus section Nidulantes is a speciose group of microscopic fungi whose species are important in indoor air quality, food spoilage, mycotoxin production and human pathogenicity. We assembled as many species from the section as possible with either type specimens or protologues for analysis....... DNA sequences were obtained from up to four loci to conduct phylogenetic analysis of sect. Nidulantes and other species in subgenus Nidulantes. Comparisons of phenetic characters were made. Our goal was to recognize monophyletic taxa for section Nidulantes as well as the other taxa in the subgenus...

  3. Reconstruction of 3d grain boundaries from rock thin sections, using polarised light

    Science.gov (United States)

    Markus Hammes, Daniel; Peternell, Mark

    2016-04-01

    Grain boundaries affect the physical and chemical properties of polycrystalline materials significantly by initiating reactions and collecting impurities (Birchenall, 1959), and play an essential role in recrystallization (Doherty et al. 1997). In particular, the shape and crystallographic orientation of grain boundaries reveal the deformation and annealing history of rocks (Kruhl and Peternell 2002, Kuntcheva et al. 2006). However, there is a lack of non-destructive and easy-to-use computer supported methods to determine grain boundary geometries in 3D. The only available instrument using optical light to measure grain boundary angles is still the polarising microscope with attached universal stage; operated manually and time-consuming in use. Here we present a new approach to determine 3d grain boundary orientations from 2D rock thin sections. The data is recorded by using an automatic fabric analyser microscope (Peternell et al., 2010). Due to its unique arrangement of 9 light directions the highest birefringence colour due to each light direction and crystal orientation (retardation) can be determined at each pixel in the field of view. Retardation profiles across grain boundaries enable the calculation of grain boundary angle and direction. The data for all positions separating the grains are combined and further processed. In combination with the lateral position of the grain boundary, acquired using the FAME software (Hammes and Peternell, in review), the data is used to reconstruct a 3d grain boundary model. The processing of data is almost fully automatic by using MATLAB®. Only minor manual input is required. The applicability was demonstrated on quartzite samples, but the method is not solely restricted on quartz grains and other birefringent polycrystalline materials could be used instead. References: Birchenall, C.E., 1959: Physical Metallurgy. McGraw-Hill, New York. Doherty, R.D., Hughes, D.A., Humphreys, F.J., Jonas, J.J., Juul Jensen, D., Kassner, M

  4. Nuclear-fuel-cycle risk assessment: descriptions of representative non-reactor facilities, Sections 15-19

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, K.J.

    1982-09-01

    Information is presented under the following section headings: fuel reprocessing; spent fuel and high-level and transuranic waste storage; spent fuel and high-level and transuranic waste disposal; low-level and intermediate-level waste disposal; and, transportation of radioactive materials in the nuclear fuel cycle. In each of the first three sections a description is given on the mainline process, effluent processing and waste management systems, plant layout, and alternative process schemes. Safety information and a summary are also included in each. The section on transport of radioactive materials includes information on the transportation of uranium ore, uranium ore concentrate, UF/sub 6/, PuO/sub 2/ powder, unirradiated uranium and mixed-oxide fuel assemblies, spent fuel, solidified high-level waste, contact-handled transuranic waste, remote-handled transuranic waste, and low and intermediate level nontransuranic waste. A glossary is included. (JGB)

  5. Nuclear-fuel-cycle risk assessment: descriptions of representative non-reactor facilities, Sections 15-19

    International Nuclear Information System (INIS)

    Schneider, K.J.

    1982-09-01

    Information is presented under the following section headings: fuel reprocessing; spent fuel and high-level and transuranic waste storage; spent fuel and high-level and transuranic waste disposal; low-level and intermediate-level waste disposal; and, transportation of radioactive materials in the nuclear fuel cycle. In each of the first three sections a description is given on the mainline process, effluent processing and waste management systems, plant layout, and alternative process schemes. Safety information and a summary are also included in each. The section on transport of radioactive materials includes information on the transportation of uranium ore, uranium ore concentrate, UF 6 , PuO 2 powder, unirradiated uranium and mixed-oxide fuel assemblies, spent fuel, solidified high-level waste, contact-handled transuranic waste, remote-handled transuranic waste, and low and intermediate level nontransuranic waste. A glossary is included

  6. Examination of the influence of coatings on thin superalloy sections. Volume 2: Detailed procedures and data. [corrosion resistance

    Science.gov (United States)

    Kaufman, M.

    1974-01-01

    The effects of an aluminide coating, Codep B-1, and of section thickness were investigated on two cast nickel base superalloys, Rene 80 and Rene 120. Cast section thicknesses ranged from 0.038 cm to 0.15 cm. Simulated engine exposures for 1000 hours at 899C or 982C in a jet fuel burner rig with cyclic air cooling were studied, as were the effects of surface machining before coating and re-machining and re-coating after exposures. The properties evaluated included tensile at room temperature., 871C and 982C, stress rupture at 760C, 871C, 982C and 1093C, high cycle mechanical fatigue at room temperature., and thermal fatigue with a 1093C peak temperature. Thin sections had tensile strengths similar to standard size bars up to 871C and lower strengths at 982C and above, with equivalent elongation, and stress rupture life was lower for thin sections at all test conditions. The aluminide coating lowered tensile and rupture strengths up to 871C, with greater effects on thinner specimens. Elevated temperature exposure lowered tensile and rupture strengths of thinner specimens at the lower test temperatures. Surface machining had little effect on properties, but re-machining after exposure reduced thickness and increased metallurgical changes enough to lower properties at most test conditions.

  7. Description of the ENDF-NJOY system for the generation of cross sections libraries

    International Nuclear Information System (INIS)

    Alonso V, G.

    1991-01-01

    The physics of nuclear reactors requires of a great number of data to be able to evaluate the different phenomena that happen in a nuclear reactor; these data are mainly the microscopic neutron cross sections, but it is also required of data of radioactive decay and of nuclear structure for a great number of materials as well as of the cross sections of the photons and the production of these for the neutron interaction. These data group in nuclear databases, being the main ones: ENDF Nuclear Evaluated File, ENDL Dates Nuclear Evaluated Library it Dates (of the Laboratory Lawrence Livermore). JENDL Japanese Nuclear Evaluated Library Dates. Soviet SOKRATOR Nuclear Evaluated KEDAF Nuclear Karlsruhe File Dates. JEF Join Evaluated File (coordinated by NEA Data Bank). The existent codes that execute neutron and photon calculations require libraries of data that are very different some of other and of the databases. Of here that it is required of a series of processing codes that use the database like enter and its generate a secondary library of cross sections, which is read as enter for a code of spectra generation. Generally average cross sections by group are obtained; this library is that it is used in the codes that execute neutron calculations. (Author)

  8. Nanoscale size effects on the mechanical properties of platinum thin films and cross-sectional grain morphology

    KAUST Repository

    Abbas, K

    2015-12-10

    © 2016 IOP Publishing Ltd. The mechanical behavior of polycrystalline Pt thin films is reported for thicknesses of 75 nm, 100 nm, 250 nm, and 400 nm. These thicknesses correspond to transitions between nanocrystalline grain morphology types as found in TEM studies. Thinner samples display a brittle behavior, but as thickness increases the grain morphology evolves, leading to a ductile behavior. During evolution of the morphology, dramatic differences in elastic moduli (105-160 GPa) and strengths (560-1700 MPa) are recorded and explained by the variable morphology. This work suggests that in addition to the in-plane grain size of thin films, the transitions in cross-sectional morphologies of the Pt films significantly affect their mechanical behavior.

  9. Construction and monitoring of thin overlay and crack sealant test sections at the Pecos test track.

    Science.gov (United States)

    2014-10-01

    In this project, several crack sealant sections were constructed at the Pecos RTC. Six different sealants were : applied in routed and non-routed configurations on both older and newer pavement. The following summer, : the sections were revaluated in...

  10. Comparative study of thin sectional anatomical images from Chinese visible human data set and computed tomography images of superior mediastinum.

    Science.gov (United States)

    Wu, Yi; Luo, Na; Tan, Li-Wen; Fang, Bing-Ji; Li, Ying; Xie, Bing; Xu, Hao-Tong; Hu, Nan; Yang, Wei-Ping; Wu, Wei; Lamers, Wouter H; Zhang, Shao-Xiang

    2012-11-01

    The structures of superior mediastinum and their spatial relationships are complex and difficult to master. This study aimed to compare visualization of the superior mediastinum based on computed tomography (CT) images and on the thin sections of the Chinese visible human (CVH) data set to provide a sectional anatomical basis for diagnostic imaging of superior mediastinal pathology. CVH sections of the mediastinum of a 35-year old male were compared with plain and enhanced CT images of a 45-year old male without apparent abnormalities in the upper chest. In addition, a three-dimensional model based on the CVH sections was compared with a model based on CT images. Although CT imaging is noninvasive and can be carried out in many individuals, its weakness is clearly the visualization of small soft tissue structures. In this respect, the sectional anatomical approach of the CVH images is complementary, as it visualizes these small soft tissue structures due to the higher resolution in the plain of sectioning and the color of the different structures in the section. Three-dimensional surface and volume rendering of reconstructions of the CVH data set can help medical students and less experienced thoracic surgeons to familiarize themselves with the topographic anatomy of the superior mediastinal structures and their spatial relationships, and thus with interpreting CT images of patients. Copyright © 2012 Wiley Periodicals, Inc.

  11. On the SCA-description of the energy- and impact parameter dependence of K-shell ionization cross sections

    International Nuclear Information System (INIS)

    Trautmann, D.; Kauer, T.

    1989-01-01

    We present the application of the SCA-model to impact-parameter and energy-dependent K-shell ionization cross sections for several projectile-target combinations. Then we discuss the successes and failures of the SCA-description and investigate the additional approximations still existing in this approach. It is shown that after the introduction of a fully time-dependent perturbed electronic boundstate wave function many of the former discrepancies between experiment and theory can be resolved and in general very good agreement is obtained. (orig.)

  12. The thin section rock physics: Modeling and measurement of seismic wave velocity on the slice of carbonates

    Energy Technology Data Exchange (ETDEWEB)

    Wardaya, P. D., E-mail: pongga.wardaya@utp.edu.my; Noh, K. A. B. M., E-mail: pongga.wardaya@utp.edu.my; Yusoff, W. I. B. W., E-mail: pongga.wardaya@utp.edu.my [Petroleum Geosciences Department, Universiti Teknologi PETRONAS, Tronoh, Perak, 31750 (Malaysia); Ridha, S. [Petroleum Engineering Department, Universiti Teknologi PETRONAS, Tronoh, Perak, 31750 (Malaysia); Nurhandoko, B. E. B. [Wave Inversion and Subsurface Fluid Imaging Research Laboratory (WISFIR), Dept. of Physics, Institute of Technology Bandung, Bandung, Indonesia and Rock Fluid Imaging Lab, Bandung (Indonesia)

    2014-09-25

    This paper discusses a new approach for investigating the seismic wave velocity of rock, specifically carbonates, as affected by their pore structures. While the conventional routine of seismic velocity measurement highly depends on the extensive laboratory experiment, the proposed approach utilizes the digital rock physics view which lies on the numerical experiment. Thus, instead of using core sample, we use the thin section image of carbonate rock to measure the effective seismic wave velocity when travelling on it. In the numerical experiment, thin section images act as the medium on which wave propagation will be simulated. For the modeling, an advanced technique based on artificial neural network was employed for building the velocity and density profile, replacing image's RGB pixel value with the seismic velocity and density of each rock constituent. Then, ultrasonic wave was simulated to propagate in the thin section image by using finite difference time domain method, based on assumption of an acoustic-isotropic medium. Effective velocities were drawn from the recorded signal and being compared to the velocity modeling from Wyllie time average model and Kuster-Toksoz rock physics model. To perform the modeling, image analysis routines were undertaken for quantifying the pore aspect ratio that is assumed to represent the rocks pore structure. In addition, porosity and mineral fraction required for velocity modeling were also quantified by using integrated neural network and image analysis technique. It was found that the Kuster-Toksoz gives the closer prediction to the measured velocity as compared to the Wyllie time average model. We also conclude that Wyllie time average that does not incorporate the pore structure parameter deviates significantly for samples having more than 40% porosity. Utilizing this approach we found a good agreement between numerical experiment and theoretically derived rock physics model for estimating the effective seismic

  13. The thin section rock physics: Modeling and measurement of seismic wave velocity on the slice of carbonates

    International Nuclear Information System (INIS)

    Wardaya, P. D.; Noh, K. A. B. M.; Yusoff, W. I. B. W.; Ridha, S.; Nurhandoko, B. E. B.

    2014-01-01

    This paper discusses a new approach for investigating the seismic wave velocity of rock, specifically carbonates, as affected by their pore structures. While the conventional routine of seismic velocity measurement highly depends on the extensive laboratory experiment, the proposed approach utilizes the digital rock physics view which lies on the numerical experiment. Thus, instead of using core sample, we use the thin section image of carbonate rock to measure the effective seismic wave velocity when travelling on it. In the numerical experiment, thin section images act as the medium on which wave propagation will be simulated. For the modeling, an advanced technique based on artificial neural network was employed for building the velocity and density profile, replacing image's RGB pixel value with the seismic velocity and density of each rock constituent. Then, ultrasonic wave was simulated to propagate in the thin section image by using finite difference time domain method, based on assumption of an acoustic-isotropic medium. Effective velocities were drawn from the recorded signal and being compared to the velocity modeling from Wyllie time average model and Kuster-Toksoz rock physics model. To perform the modeling, image analysis routines were undertaken for quantifying the pore aspect ratio that is assumed to represent the rocks pore structure. In addition, porosity and mineral fraction required for velocity modeling were also quantified by using integrated neural network and image analysis technique. It was found that the Kuster-Toksoz gives the closer prediction to the measured velocity as compared to the Wyllie time average model. We also conclude that Wyllie time average that does not incorporate the pore structure parameter deviates significantly for samples having more than 40% porosity. Utilizing this approach we found a good agreement between numerical experiment and theoretically derived rock physics model for estimating the effective seismic wave

  14. Diffusion in a tube of varying cross section: Numerical study of reduction to effective one-dimensional description

    Science.gov (United States)

    Berezhkovskii, A. M.; Pustovoit, M. A.; Bezrukov, S. M.

    2007-04-01

    Brownian dynamics simulations of the particle diffusing in a long conical tube (the length of the tube is much greater than its smallest radius) are used to study reduction of the three-dimensional diffusion in tubes of varying cross section to an effective one-dimensional description. The authors find that the one-dimensional description in the form of the Fick-Jacobs equation with a position-dependent diffusion coefficient, D(x ), suggested by Zwanzig [J. Phys. Chem. 96, 3926 (1992)], with D(x ) given by the Reguera-Rubí formula [Phys. Rev. E 64, 061106 (2001)], D(x )=D/√1+R'(x)2, where D is the particle diffusion coefficient in the absence of constraints, and R(x ) is the tube radius at x, is valid when ∣R'(x)∣⩽1. When ∣R'(x)∣>1, higher spatial derivatives of the one-dimensional concentration in the effective diffusion equation cannot be neglected anymore as was indicated by Kalinay and Percus [J. Chem. Phys. 122, 204701 (2005)]. Thus the reduction to the effective one-dimensional description is a useful tool only when ∣R'(x)∣⩽1 since in this case one can apply the powerful standard methods to analyze the resulting diffusion equation.

  15. Thin-section multiplanar reformats from multidetector-row CT data: Utility for assessment of regional tumor extent in non-small cell lung cancer

    International Nuclear Information System (INIS)

    Higashino, Takanori; Ohno, Yoshiharu; Takenaka, Daisuke; Watanabe, Hirokazu; Nogami, Munenobu; Ohbayashi, Chiho; Yoshimura, Masahiro; Satouchi, Miyako; Nishimura, Yoshihiro; Fujii, Masahiko; Sugimura, Kazuro

    2005-01-01

    Purpose: To determine the clinical utility of thin-section multiplanar reformats (MPRs) from multidetector-row CT (MDCT) data sets for assessing the extent of regional tumors in non-small cell lung cancer (NSCLC) patients. Materials and methods: Sixty consecutive NSCLC patients, who were considered candidates for surgical treatment, underwent contrast-enhanced MDCT examinations, surgical resection and pathological examinations. All MDCT examinations were performed with a 4-detector row computed tomography (CT). From each raw CT data set, 5 mm section thickness CT images (routine CT), 1.25 mm section thickness CT images (thin-section CT) and 1.25 mm section thickness sagittal (thin-section sagittal MPR) and coronal images (thin-section coronal MPR) were reconstructed. A 4-point visual score was used to assess mediastinal, interlobar and chest wall invasions on each image set. For assessment of utility in routine clinical practice, mean reading times for each image set were compared by means of Fisher's protected least significant difference (PLSD) test. A receiver operator characteristic (ROC) analysis was performed to determine the diagnostic capability of each of the image data sets. Finally, sensitivity, specificity and accuracy of the reconstructed images were compared by McNemar test. Results: Mean reading times for thin-section sagittal and coronal MPRs were significantly shorter than those for routine CT and thin-section CT (p < 0.05). Areas under the curve (Azs) showing interlobar invasion on thin-section sagittal and coronal MPRs were significantly larger than that on routine CT (p = 0.03), and the Az on thin-section sagittal MPR was also significantly larger than that on routine CT (p = 0.02). Accuracy of chest wall invasion by thin-section sagittal MPR was significantly higher than that by routine CT (p = 0.04). Conclusion: Thin-section multiplanar reformats from multidetector-row CT data sets are useful for assessing the extent of regional tumors in non

  16. Liquid Microjunction Surface Sampling Probe Electrospray Mass Spectrometry for Detection of Drugs and Metabolites in Thin Tissue Sections

    Energy Technology Data Exchange (ETDEWEB)

    Van Berkel, Gary J [ORNL; Kertesz, Vilmos [ORNL; Koeplinger, Kenneth A. [Merck Research Laboratories; Vavek, Marissa [Merck Research Laboratories; Kong, Ah-Ng Tony [Rutgers University

    2008-01-01

    A self-aspirating, liquid micro-junction surface sampling probe/electrospray emitter mass spectrometry system was demonstrated for use in the direct analysis of spotted and dosed drugs and their metabolites in thin tissue sections. Proof-of-principle sampling and analysis directly from tissue without the need for sample preparation was demonstrated first by raster scanning a region on a section of rat liver onto which reserpine was spotted. The mass spectral signal from selected reaction monitoring was used to develop a chemical image of the spotted drug on the tissue. The probe was also used to selectively spot sample areas of sagittal whole mouse body tissue sections that had been dosed orally (90 mg/kg) with R,S-sulforaphane 3 hrs prior to sacrifice. Sulforaphane and its glutathione and N-acetyl cysteine conjugates were monitored with selected reaction monitoring and detected in the stomach and various other tissues from the dosed mouse. No signal for these species was observed in the tissue from a control mouse. The same dosed tissue section was used to illustrate the possibility of obtaining a line scan across the whole body section. In total these results illustrate the potential for rapid screening of the distribution of drugs and metabolites in tissue sections with the micro-liquid junction surface sampling probe/electrospray mass spectrometry approach.

  17. Low bone mineral density among adults with disabilities in Taiwan: A cross-sectional descriptive study.

    Science.gov (United States)

    Chen, Po-Han; Chen, Chu-Yeh; Lin, Yu-Chen; Chen, Mei-Yen

    2015-10-01

    Low bone mineral density (BMD) is a silent disease that can lead to osteoporosis and is a serious health problem worldwide. People with disabilities are especially at risk for fall-related death. To examine the prevalence of low bone mineral density and associated risk factors among adults with disabilities in Taiwan. We conducted a population-based, cross-sectional study in 2013; the participants were 572 community adults with disabilities over the age of 20 years. Statistical analyses used to evaluate the association included chi-squared tests, ANOVA, and logistic regression. Over one-third of the participants had an intellectual disability, 26% physical disability, and the remainder had a combination of disabilities. Of the participants, 62.5% had abnormal bone mineral density, and 21.8% met the criteria for osteoporosis. After adjusting for potential confounding variables, the determinant risk factors for low bone mineral density were age (β = -.14, p = 0.002), gender (β = -.12, p = 0.004), and level of physical activity (β = .1, p = 0.024). The majority of participants with low BMD were not aware of abnormal bone density, and only 2.4% had received treatment. This study identified a high prevalence of low bone mineral density among adults with disabilities; few of the participants possessed awareness of bone health, and very few received early treatment or information on prevention of osteoporosis. The enhancement of osteoporosis interventions and health promotion programs to prevent osteoporosis and related problems are necessary for this population. Copyright © 2015 Elsevier Inc. All rights reserved.

  18. Chronic obstructive pulmonary disease prevalence in Lebanon: a cross-sectional descriptive study

    Directory of Open Access Journals (Sweden)

    Waked M

    2011-11-01

    Full Text Available Mirna Waked1, George Khayat2, Pascale Salameh31Saint George Hospital University Medical Center, Beirut, Lebanon; 2Faculty of Medicine, Hotel-Dieu de France Hospital, Saint-Joseph University, Beirut, Lebanon; 3Faculties of Pharmacy and Public Health, Lebanese University, Beirut, LebanonBackground: Chronic obstructive pulmonary disease (COPD continues to increase worldwide. The objective of this study was to determine the prevalence of COPD in Lebanese adults.Methods: A cross-sectional study was carried out using a multistage cluster sample from all over Lebanon. Residents aged 40 years and over were enrolled. Subjects underwent baseline spirometry and answered a questionnaire. After an albuterol + ipratropium bromide bronchodilator, a posttest was performed.Results: Of 2201 individuals, only 33.3% had never smoked. The prevalence of COPD by the Global Initiative for Chronic Obstructive Lung Disease definition, was 9.7% (95% confidence interval [CI]: 8.5%–10.9%. According to the 5% lower limit of normal definition of COPD, the prevalence was 12.5% (95% CI: 11.2%–13.9%. A total of 20.2% were already diagnosed by a physician. No differences in symptoms across stages of COPD were found, but there was a significant trend for a higher number of visits to the emergency room and to the doctor (P < 0.001, and a higher number of hospitalizations (P < 0.001. Older individuals had an increased risk of COPD (adjusted odds ratio [ORa] = 1.05; so did “ever” cigarette smokers (ORa = 4.88 and water-pipe smokers (ORa = 2.53.Conclusion: This is the first epidemiological study in Lebanon that determined COPD prevalence and the link with water-pipe smoking.Keywords: COPD, prevalence, water-pipe smoking

  19. A Novel Hybrid Ultramicrotomy/FIB-SEM Technique: Preparation of Serial Electron-Transparent Thin Sections of a Hayabusa Grain

    Science.gov (United States)

    Berger, Eve L.; Keller, Lindsay P.

    2014-01-01

    The Japanese space agency's (JAXA) Hayabusa mission returned the first particulate samples (typically micro-beam techniques. The ability to glean maximal information from individual particles has become increasingly important and depends critically on sample preparation. We developed a hybrid technique combining traditional ultramicrotomy with focused ion beam (FIB) techniques, allowing for more thorough in situ investigations of grain surfaces and interiors. Using this method, we increase the number of FIB-prepared sections that can be recovered from a particle with dimensions on the order of tens of microns. These sections can be subsequently analyzed using a variety of analytical techniques. Particle RA-QD02-0211 is a approx. 40×40×20 micron particle from Itokawa containing olivine and Fe sulfides. It was embedded in low viscosity epoxy and partly sectioned to a depth of approx 10 micron; sections are placed on Cu grids with thin amorphous films for transmission electron microscope (TEM) analyses. With the sample surface partly exposed, the epoxy bullet is trimmed to a height of approx. 5mm to accommodate the allowable dimensions for FIB work (FEI Quanta 600 3D dual beam FIB-SEM). Using a diamond trim knife, the epoxy surrounding the grain is removed on 3 sides (to within a few microns of the grain); the depth of material removed extends well below the bottom of the particle. The sample is attached to an SEM pin mount, the epoxy coated with conductive paint, and the entire assembly coated with approx. 40nm of carbon to eliminate sample charging during FIB work. A protective carbon cap is placed according to the plan for the 15 FIB sections. The central 'spine' of the cap runs perpendicular to the front of the sample, and the 'ribs' protruding from either side run parallel. Each rib indicates the location of a planned FIB section, and the spine contains the final two planned sections. We use a cap with a 4 micron-wide spine and 2micron-wide ribs that have ?3

  20. Total cross section measurement of radioactive isotopes with a thin beam neutron spectrometer

    International Nuclear Information System (INIS)

    Razbudej, V.F.; Vertebnyj, V.P.; Padun, G.S.; Muravitskij, A.V.

    1975-01-01

    The method for measuring the neutron total cross sections of radioactive isotopes by a time-of-flight spectrometer with a narrow (0.17 mm in diameter) beam of thermal neutrons is described. The distinguishing feature of this method is the use of capillary samples with a small amount of substance (0.05-1.0 mg). The energy range is 0.01-0.3 eV. The total cross sections of irradiated samples of sub(153)Eu and sub(151)Eu are measured. From them are obtained the cross sections of sub(152)Eu (Tsub(1/2)=12.4 g) and of sub(154)E (Tsub(1/2)=8.6 yr); they equal 11400+-1400 and 1530+-190 barn at E=0.0253 eV. The cross section of the sub(152)Eu absorption for the thermal spectrum (T=333 K) is determined by the activation method; it is 8900+-1200 barn

  1. Progress in the preparation of cross-sectional TEM specimens by ion-beam thinning

    CERN Document Server

    Strecker, A; Kelsch, M; Salzberger, U; Sycha, M; Gao, M; Richter, G; Benthem, K V

    2003-01-01

    In transmission electron microscopy (TEM), often the preparation of samples is the most critical part. Specimens have to have disk geometries of 3 mm diameter laterally, and they have to be transparent for the electron beam vertically. Therefore, a specimen thickness in the range of some 1-10 nm has to be achieved by the preparation process. While shrinking the specimen dimensions, care has to be taken to recover the materials properties in the nm-regime. We report and shortly discuss some TEM specimen preparation techniques mainly used in the Stuttgart TEM specimen preparation laboratory. Furthermore, we demonstrate how more advanced techniques lead to a more reliable preparation of weakly-bonded metal/SrTiO sub 3 interfaces. In addition, the advantage of low-voltage ion-milling is demonstrated by a case study for bulk SrTiO sub 3. As a result, low-voltage ion polishing as a final step in the TEM specimen preparation by conventional ion-thinning turns out to significantly increase the specimen quality. In tu...

  2. Pulmonary sarcoidosis: morphologic associations of airflow obstruction at thin section CT

    International Nuclear Information System (INIS)

    Hansel DM; Milne DS; Lwilher M; Wells AU

    1999-01-01

    The present study tries to determine the consequences and the correlation between the lung function and the scannographic patron to guide toward the understanding of the possible mechanisms responsible for the obstruction of the air roads in the sarcoidosis. A prospective study was carried out during two years in 45 patients, 27 of masculine sex, the discoveries of the CT were classified in five states, according to the commitment parenchymatose with or without commitment ganglionar, to the calculation of the committed lung volume and the description of radiological patterns as attenuation diminished in mosaic pattern, burnished glass, nodules, obscurely with or without air bronchogramma and reticular pattern. To all the patients they were carried out tests of lung function in the same month of the taking of the CT

  3. Taxonomical and nomenclatural notes on Centaurea: A proposal of classification, a description of new sections and subsections, and a species list of the redefined section Centaurea

    Directory of Open Access Journals (Sweden)

    Hilpold, A.

    2014-12-01

    Full Text Available In this paper, we summarize the results of our long-date research on the genus Centaurea. The first part of the paper deals with the overall classification of the genus, which we propose to divide into three subgenera: subgenus Centaurea, subgenus Cyanus and subgenus Lopholoma. The second part of this publication gives a recopilation of the species of the redefined section Centaurea, a group that includes former sections Acrolophus (sect. Centaurea s. str., Phalolepis and Willkommia, together with taxonomical, geographical, ecological and karyological considerations. Finally, new descriptions or nomenclatural combinations are proposed to correlate nomenclature to the new classification: a new combination (sect. Acrocentron subsect. Chamaecyanus is proposed in subgenus Lopholoma; three new sections (sects. Akamantis, Cnicus, and Hyerapolitanae are described in subgenus Centaurea; two subsections (subsects. Phalolepis and Willkommia in sect. Centaurea; and three subsections (subsects. Exarata, Jacea, and Subtilis in sect. Phrygia.En este trabajo presentamos los resultados de nuestras investigaciones de larga fecha en el género Centaurea. La primera parte del trabajo trata de la clasificación del género, que proponemos dividir en tres subgéneros: subgénero Centaurea, subgénero Cyanus y subgénero Lopholoma. La segunda parte es una recopilación de las especies de la redefinida sección Centaurea, que incluye las antiguas secciones Acrolophus (sect. Centaurea s. str., Phalolepis y Willkommia, junto con consideraciones geográficas, ecológicas y cariológicas. Por último, proponemos nuevas secciones, subsecciones y combinaciones para correlacionar nomenclatura y clasificación: proponemos una nueva (sect. Acrocentron subsect. Chamaecyanus en el subgénero Lopholoma; se describen tres secciones nuevas (sects. Akamantis, Cnicus y Hyerapolitanae en el subgénero Centaurea; dos subsecciones (subsects. Phalolepis and Willkommia en la secci

  4. Description of nuclear structure and cross sections for nucleon-nucleus scattering on the basis of effective Skyrme forces

    International Nuclear Information System (INIS)

    Kuprikov, V. I.; Pilipenko, V. V.; Soznik, A. P.; Tarasov, V. N.; Shlyakhov, N. A.

    2009-01-01

    The possibility of constructing such new versions of effective nucleon-nucleon forces that would make it possible to describe simultaneously the cross sections for nucleon-nucleus scattering and quantities characterizing nuclear matter and the structure of finite even-even nuclei is investigated on the basis of a microscopic nucleon-nucleus optical potential that is calculated by using effective Skyrme interaction. A procedure for optimizing the parameters of Skyrme forces by employing fits to specific angular distributions for neutron-nucleus scattering and by simultaneously testing the features of nuclear matter, the binding energy of the target nucleus, and its proton root-mean-square radius is proposed. A number of versions of modified Skyrme forces that ensure a reasonable description of both nucleon-nucleus scattering and the properties of nuclear structure are found on the basis of this procedure.

  5. Correlates of cannabis use among high school students in Shamva District, Zimbabwe: A descriptive cross-sectional study.

    Science.gov (United States)

    Chivandire, Charmaine T; January, James

    2016-06-01

    We set out to determine the predisposing, enabling, and reinforcing factors that influence cannabis use in young people aged 13 to 19 years in Shamva District, Zimbabwe. A descriptive cross-sectional study focusing on the correlates of cannabis use was conducted among 311 school-going adolescents who were selected using multistage sampling. Eight percent of the students in our sample reported current use of cannabis. Associations were found between cannabis use and alcohol consumption (P cannabis and having family members, friends, and parents who have used cannabis (P cannabis. There is need for identification of these risky behaviours among students, and ecological frameworks and holistic approaches in health promotion programming should be fostered in an effort to increase awareness of the potential harmful effects of cannabis use on adolescents' health and life outcomes.

  6. Patients' perception of noise in the operating room-a descriptive and analytic cross-sectional study

    DEFF Research Database (Denmark)

    Hasfeldt-hansen, Dorthe; Maindal, Helle Terkildsen; Toft, Palle

    2014-01-01

    levels in the OR as very high and experienced the noise as annoying, disruptive, and stressful. There was no correlation between the actual noise levels to which patients were exposed and their perception of noise. Acute patients perceived significantly more noise than elective patients (P...PURPOSE: Noise is a general stressor that affects the cardiovascular system, resulting in increased blood pressure and heart rate, both of which can be problematic for the patient preparing for anesthesia and surgery. The purpose of this study was to investigate the patient's perception of noise...... in the OR before anesthesia, the correlation between the actual noise levels and the patient's perception of noise, and if there are particular patient subgroups that are especially vulnerable to noise. DESIGN: This cross-sectional study was performed within a mixed descriptive and analytical design, including 120...

  7. NUMERICAL ANALYSIS OF THE CRITICAL STATE OF THIN-WALLED STRUCTURE WITH Z-PROFILE CROSS SECTION

    Directory of Open Access Journals (Sweden)

    Patryk Różyło

    2017-03-01

    Full Text Available The object of the study was the thin-walled profile with Z-shaped cross section made of the carbon-epoxy composite. Material model was prepared based on the implemented orthotropic properties. The purpose of study was to determine the value of the critical load at which buckling occurs, the form of buckling and operating characteristics in critical condition. In order to achieve this numerical analysis were carried out. Additionally, the effects of the modification in arrangement of layers of the laminate to the stability and strength of thin-walled composite structures was presented. Numerical studies were carried out using commercial simulation software - ABAQUS®. Within the FEM research, both forms of buckling and the associated critical load, dependent on the configuration the layers of the composite were achieved. Analysis of the obtained results, allowed the evaluation of the structure's work in relation to the level of energy consumption or rigidity estimation. In the paper only numerical simulations of the critical state were conducted.

  8. Raster-Mode Continuous-Flow Liquid Microjunction Mass Spectrometry Imaging of Proteins in Thin Tissue Sections.

    Science.gov (United States)

    Griffiths, Rian L; Randall, Elizabeth C; Race, Alan M; Bunch, Josephine; Cooper, Helen J

    2017-06-06

    Mass spectrometry imaging by use of continuous-flow liquid microjunction sampling at discrete locations (array mode) has previously been demonstrated. In this Letter, we demonstrate continuous-flow liquid microjunction mass spectrometry imaging of proteins from thin tissue sections in raster mode and discuss advantages (a 10-fold reduction in analysis time) and challenges (suitable solvent systems, data interpretation) of the approach. Visualization of data is nontrivial, requiring correlation of solvent-flow, mass spectral data acquisition rate, data quality, and liquid microjunction sampling area. The latter is particularly important for determining optimum pixel size. The minimum achievable pixel size is related to the scan time of the instrument used. Here we show a minimum achievable pixel size of 50 μm (x-dimension) when using an Orbitrap Elite; however a pixel size of 600 μm is recommended in order to minimize the effects of oversampling on image accuracy.

  9. Thin-section microscopy of decayed crystalline marble from the garden sculptures of Schoenbrunn Palace in Vienna

    International Nuclear Information System (INIS)

    Weber, J.; Beseler, S.; Sterflinger, K.

    2007-01-01

    Sterzing marble, a crystalline white marble used in the late-Baroque garden sculptures of Schoenbrunn Palace in Vienna, was studied by means of thin-section and scanning electron microscopy in order to obtain a better understanding of its surface decay caused by atmospheric weathering. Following the classification of distinct phenomena of deterioration by visual on-site inspection, the microstructural features including surface erosion, micro-cracking, soiling, black crust formation, and microbiological infestation are exemplified by microscopical images and are briefly discussed. The results proved useful for evaluating and understanding the various types of marble decay for creating a safer basis for establishing the procedural principles aimed at conservation and maintenance of the sculptures

  10. DELIVERABLE 1.2.1.B THIN SECTION DESCRIPTIONS: LITTLE UTE AND SLEEPING UTE FIELDS, MONTEZUMA COUNTY, COLORADO

    International Nuclear Information System (INIS)

    Eby, David E.; Wray, Laura L.

    2003-01-01

    Over 400 million barrels (64 million m 3 ) of oil have been produced from the shallow-shelf carbonate reservoirs in the Pennsylvanian (Desmoinesian) Paradox Formation in the Paradox Basin, Utah and Colorado. With the exception of the giant Greater Aneth field, the other 100 plus oil fields in the basin typically contain 2 to 10 million barrels (0.3-1.6 million m 3 ) of original oil in place. Most of these fields are characterized by high initial production rates followed by a very short productive life (primary), and hence premature abandonment. Only 15 to 25 percent of the original oil in place is recoverable during primary production from conventional vertical wells. An extensive and successful horizontal drilling program has been conducted in the giant Greater Aneth field in Utah (figure 1). However, to date, only two horizontal wells have been drilled in small Ismay and Desert Creek fields. The results from these wells were disappointing due to poor understanding of the carbonate facies and diagenetic fabrics that create reservoir heterogeneity. These small fields, and similar fields in the basin, are at high risk of premature abandonment. At least 200 million barrels (31.8 million m 3 ) of oil will be left behind in these small fields because current development practices leave compartments of the heterogeneous reservoirs undrained. Through proper geological evaluation of the reservoirs, production may be increased by 20 to 50 percent through the drilling of low-cost single or multilateral horizontal legs from existing vertical development wells. In addition, horizontal drilling from existing wells minimizes surface disturbances and costs for field development, particularly in the environmentally sensitive areas of southeastern Utah and southwestern Colorado

  11. DELIVERABLE 1.2.1A THIN SECTION DESCRIPTIONS: CHEROKEE AND BUG FIELDS, SAN JUAN COUNTY, UTAH

    International Nuclear Information System (INIS)

    Chidsey, Thomas C. Jr; Eby, David E.

    2003-01-01

    Over 400 million barrels (64 million m 3 ) of oil have been produced from the shallow-shelf carbonate reservoirs in the Pennsylvanian (Desmoinesian) Paradox Formation in the Paradox Basin, Utah and Colorado. With the exception of the giant Greater Aneth field, the other 100 plus oil fields in the basin typically contain 2 to 10 million barrels (0.3-1.6 million m 3 ) of original oil in place. Most of these fields are characterized by high initial production rates followed by a very short productive life (primary), and hence premature abandonment. Only 15 to 25 percent of the original oil in place is recoverable during primary production from conventional vertical wells. An extensive and successful horizontal drilling program has been conducted in the giant Greater Aneth field. However, to date, only two horizontal wells have been drilled in small Ismay and Desert Creek fields. The results from these wells were disappointing due to poor understanding of the carbonate facies and diagenetic fabrics that create reservoir heterogeneity. These small fields, and similar fields in the basin, are at high risk of premature abandonment. At least 200 million barrels (31.8 million m 3 ) of oil will be left behind in these small fields because current development practices leave compartments of the heterogeneous reservoirs undrained. Through proper geological evaluation of the reservoirs, production may be increased by 20 to 50 percent through the drilling of low-cost single or multilateral horizontal legs from existing vertical development wells. In addition, horizontal drilling from existing wells minimizes surface disturbances and costs for field development, particularly in the environmentally sensitive areas of southeastern Utah and southwestern Colorado

  12. Fracture characterization in patterned thin films by cross-sectional nanoindentation

    Energy Technology Data Exchange (ETDEWEB)

    Ocana, I. [CEIT and TECNUN (University of Navarra), P. Manuel Lardizabal 15, 20018 San Sebastian (Spain); Molina-Aldareguia, J.M. [CEIT and TECNUN (University of Navarra), P. Manuel Lardizabal 15, 20018 San Sebastian (Spain); Gonzalez, D. [CEIT and TECNUN (University of Navarra), P. Manuel Lardizabal 15, 20018 San Sebastian (Spain); Elizalde, M.R. [CEIT and TECNUN (University of Navarra), P. Manuel Lardizabal 15, 20018 San Sebastian (Spain)]. E-mail: relizalde@ceit.es; Sanchez, J.M. [CEIT and TECNUN (University of Navarra), P. Manuel Lardizabal 15, 20018 San Sebastian (Spain); Martinez-Esnaola, J.M. [CEIT and TECNUN (University of Navarra), P. Manuel Lardizabal 15, 20018 San Sebastian (Spain); Gil Sevillano, J. [CEIT and TECNUN (University of Navarra), P. Manuel Lardizabal 15, 20018 San Sebastian (Spain); Scherban, T.. E-mail: Tracey_Scherban@Hotmail.com; Pantuso, D. [Logic Technology Development, Intel Corporation, Hillsboro, OR 97124 (United States); Sun, B. [Logic Technology Development, Intel Corporation, Hillsboro, OR 97124 (United States); Xu, G. [Logic Technology Development, Intel Corporation, Hillsboro, OR 97124 (United States); Miner, B. [Logic Technology Development, Intel Corporation, Hillsboro, OR 97124 (United States); He, J. [Logic Technology Development, Intel Corporation, Hillsboro, OR 97124 (United States); Maiz, J. [Logic Technology Development, Intel Corporation, Hillsboro, OR 97124 (United States)

    2006-08-15

    A testing technique based on cross-sectional nanoindentation has been used to assess the mechanical reliability of interconnect structures. A Berkovich indenter was used to initiate fracture in a silicon substrate and cracks propagated through the structure. To better control crack growth and to convert the problem into two dimensions, a trench parallel to the indentation surface was previously machined using a focused ion beam. The crack lengths obtained for different material systems in the interconnect structure correlate well with the fracture energies measured for the same materials in blanket films. Finite element model simulations incorporating cohesive elements have been used to model the fracture processes and to explain the different cracking behaviour observed.

  13. Using the Internet as a source of information during pregnancy - A descriptive cross-sectional study in Sweden.

    Science.gov (United States)

    Bjelke, Maria; Martinsson, Anna-Karin; Lendahls, Lena; Oscarsson, Marie

    2016-09-01

    The Internet plays a major role for pregnant women in seeking knowledge and for getting in touch with like-minded women. The information is available at all hours and can be accessed anywhere. The information provides the women with a sense of control and confidence but the large amount of information available can also be overwhelming. The aim of this study was to identify how women use the Internet as a source of information during their pregnancy and how it affects them. A descriptive cross-sectional study was conducted.Data were collected through a questionnaire at antenatal clinics in the southern Sweden. The data were analyzed descriptively A total of 193 Swedish women, pregnant at least 34 weeks, participated in the study. The response rate was 94%. Almost all (95%) of the women in the study used the Internet as a source of information. The main reason was to find information and read about people in the same situation. Reading pregnancy-related information on the Internet was seen as positive. However, a majority of the woman experienced feelings of worry due to something they read online. These feelings were most commonly coped with by talking to a partner, relatives, and friends or by asking the midwife at their next appointment. Eleven per cent of the women contacted the general healthcare services because of their feelings of worry. Almost all women in this study searched the Internet to find pregnancy-related information, despite being satisfied with the information they received from the ANC. Using the Internet was seen as complementary to the information from professionals. It also caused feelings of worry, which could lead to the woman contacting healthcare services for support. ANC could help to reduce these feelings for some women by informing about the advantages and disadvantages with online information and recommending suitable web pages. Copyright © 2016 Elsevier Ltd. All rights reserved.

  14. Family satisfaction with patient care in critical care units in Pakistan: a descriptive cross-sectional study.

    Science.gov (United States)

    Ahtisham, Younas; Subia, Parveen; Gideon, Victor

    2016-11-23

    To assess family satisfaction with care provided to patients in critical care units in Islamabad. A descriptive cross-sectional study was conducted in 11 medical and surgical critical care units at two private hospitals in Islamabad, Pakistan. The purposive sample consisted of 323 immediate family members and other relatives and friends (referred to as family members in this article) of 323 patients admitted to the critical care units for at least 24 hours. The revised Critical Care Family Satisfaction Survey was used for data collection. Descriptive statistics were used for data analysis. A total of 149/323 (46%) family members were 'very satisfied' with the honesty (openness) of staff in explaining the patient's condition, and 137/323 (42%) family members were 'very satisfied' with the nurses' availability to speak to them. A total of 143/323 (44%) family members were 'satisfied' with the honesty (openness) of staff in explaining the patient's condition, and 131/323 (41%) were 'satisfied' with the nurses' availability to speak to them. A few family members (21/323, 6%) were 'very dissatisfied' with the flexibility of the visiting hours and a few (20/323, 6%) were 'very dissatisfied' with the noise level in the critical care units. Some family members (38/323, 12%) were 'not satisfied' with the flexibility of the visiting hours, and some (18/323, 6%) were 'not satisfied' with the noise level in the critical care units. The majority of family members (244/323, 75%) were 'satisfied' or 'very satisfied' that their relatives' needs were being met in the critical care units. However, qualitative data indicate that most family members wanted greater involvement in decision making. These findings should be considered by staff working in critical care settings to ensure high-quality patient care.

  15. Correlation Between Critical Thinking Disposition and Mental Self-Supporting Ability in Nursing Undergraduates: A Cross-Sectional Descriptive Study.

    Science.gov (United States)

    Wu, Defang; Luo, Yang; Liao, Xinyu

    2017-02-01

    There is universal agreement on the essential role of critical thinking in nursing practice. Most studies into this topic have provided descriptive statistical information and insights on related external factors such as educational environment and teaching strategies. However, there has been limited research into the psychological factors that may predict the disposition of students toward critical thinking. This study explored the relationship between the disposition of nursing students toward critical thinking and their mental self-supporting ability to obtain a profile and determine the psychological predictors of critical thinking. A cross-sectional descriptive study was conducted in 2013 using a convenience sample from four nursing schools. Four hundred six Chinese nursing undergraduates completed two questionnaires including (a) the California Critical Thinking Disposition Inventory (Chinese version) and (b) the Mental Self-Supporting Questionnaire for University Students. Pearson's correlation and linear regression analysis were used to investigate the relationship between these two variables and the predicted positive psychological qualities for the critical thinking disposition of participants. Average participant scores for critical thinking disposition and mental self-supporting were 280.91 ± 28.43 and 76.40 ± 8.47, respectively. Positive correlations were observed between these two variables (r = .583, p thinking disposition (R = .435, p thinking and mental self-supporting abilities.The four factors that had a major influence on critical thinking disposition included self-decision, self-cognition, self-confidence, and self-responsibility. Nursing educators should focus on improving the critical thinking ability of their students in these four aspects.

  16. Bioimaging TOF-SIMS of tissues by gold ion bombardment of a silver-coated thin section.

    Science.gov (United States)

    Nygren, Håkan; Johansson, Bengt R; Malmberg, Per

    2004-12-01

    The imaging time-of-flight secondary-ion-mass-spectrometry (TOF-SIMS) method was utilized to address the problem of cholesterol localization in rat tissues. Rat kidneys were fixed, cryoprotected by sucrose, frozen, sectioned by cryoultramicrotomy, and dried at room temperature. The samples were either covered with a thin silver layer or analyzed uncovered in an imaging TOF-SIMS instrument equipped with an Au1-3(+)-source. The yield of desorbed secondary ions for some species was up to 600-fold higher after silver coating of the samples. Reference samples of cholesterol were silver-coated and analyzed by TOF-SIMS to define significant peaks, specific for cholesterol. Such peaks were found at m/z = 386 (C27H46O+), m/z = 493 (C27H46O107Ag+), m/z = 495 (C27H46O109Ag+), m/z = 879 (C54H92O2 107Ag+), and m/z = 881 (C54H92O2 109Ag+). The silver-cationized cholesterol (493 SIMS in the kidney sections and showed a high cholesterol content in the kidney glomeruli. A more diffuse distribution of cholesterol was also found over areas representing the cytoplasm or plasma membrane of the epithelial cells in the proximal tubules of rat kidney. Copyright 2005 Wiley-Liss, Inc.

  17. Cystic lung changes in a thin section CT in an asymptomatic young adult with unilateral pulmonary vein atresia: A case report

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Seung Choul; Yi, Jeong Geun; Park, Jeong Hee [Konkuk Univ. Medical Center, Seoul (Korea, Republic of)

    2012-07-15

    Unilateral pulmonary vein atresia is a rare anomaly, usually associated with symptoms of recurrent hemoptysis and pneumonia in early childhood. Only one report of an asymptomatic adult patient can be found in the literature. We present the case of an asymptomatic patient with unilateral right pulmonary vein atresia in a 20 year old man. Chest radiograph and multidetector computed tomography showed not only pulmonary vein atresia, pulmonary artery hypoplasia, but also cystic lung changes on thin section CT, along with septal and bronchovascular bundle thickening, and ground-glass opacity. Unilateral pulmonary vein atresia could be another disease which can show cystic lung changes on thin section chest CT.

  18. Cardiovascular and metabolic monitoring of children and adolescents on antipsychotic treatment: A cross-sectional descriptive study.

    Science.gov (United States)

    de la Torre Villalobos, Miquel; Martin-López, Luis Miguel; Fernández Sanmartín, María Isabel; Pujals Altes, Elena; Gasque Llopis, Silvia; Batlle Vila, Santiago; Pérez-Solá, Victor; Novo Navarro, Patricia; Gómez Simón, Isabel; Fresno González, Cristina; Camprodon Rosanas, Ester; Bulbena Vilarrasa, Antonio

    Cardiovascular and metabolic monitoring of patients on antipsychotic medication is essential. This becomes more important in those of paediatric age, as they are more vulnerable, and also because prescriptions of this kind of drugs are still increasing. To evaluate the monitoring of cardiovascular and metabolic risk factors in a group of children and young people on antipsychotic medication. A descriptive cross-sectional study was conducted in which a group of 220 patients aged 8-17 years, diagnosed with a mental disorder and on antipsychotic treatment. They were compared to a control group of 199 asthmatic patients not exposed to antipsychotic drugs. Data was extracted from the computerised clinical history ECAP in 2013. The mean age of the children was 12 years (8-17). Risperidone (67%) was the most frequent treatment. The recording of Body Mass Index (BMI) and blood pressure (AP) was 50% in Mental Disorder (MD) patients. A higher number of cardiovascular monitoring physical parameters (weight, height, BMI and BP) were observed in the MD group compared to the control Asthma control group. Altogether, more physical parameters than biochemistry parameters were recorded. This study shows that the recording of cardiovascular parameters and metabolic studies needs to be improved in children and adolescents on treatment with antipsychotics. Copyright © 2016 SEP y SEPB. Publicado por Elsevier España, S.L.U. All rights reserved.

  19. Associations of eHealth literacy with health-promoting behaviors among hospital nurses: A descriptive cross-sectional study.

    Science.gov (United States)

    Cho, Hyeonmi; Han, Kihye; Park, Bu Kyung

    2018-03-25

    To investigate associations of eHealth Literacy with health-promoting behaviours among hospital nurses in South Korea. Health-promoting behaviours of nurses are crucial for their own improved health and health-related behaviours of patients. eHealth literacy refers to the ability to search, understand and evaluate health information available online. With the growing use of the Internet, eHealth literacy is emerging as an important factor enhancing health-promoting behaviours. Descriptive cross-sectional design with self-reported questionnaires. Data were collected between March and May 2016 from five hospitals in South Korea. Health-promoting behaviours and eHealth literacy were assessed using Health Promoting Lifestyle Profile-II and K-eHEALS, respectively. Multiple linear regression models were used to examine associations of eHealth literacy and health-promoting behaviours. Nurses with high level of eHealth literacy had significantly positive overall health-promoting behaviours, stress management, interpersonal relations, self-actualization and health responsibility, but not for nutrition and physical activity. Improving eHealth literacy through various strategies could be an effective way to boost health-promoting behaviours among nurses. However, improvement of actual health-promoting behaviours such as nutrition and physical activity will require systematic and organizational changes. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

  20. Rates of Detection of Mood and Anxiety Disorders in Primary Care: A Descriptive, Cross-Sectional Study

    Science.gov (United States)

    Vermani, Monica; Marcus, Madalyn; Katzman, Martin A.

    2011-01-01

    Objective: To determine the incidence of major depressive disorder, bipolar disorder, panic disorder, social anxiety disorder, and generalized anxiety disorder and to assess their detection rates in the Canadian primary care setting. Method: The descriptive, cross-sectional study was conducted in 7 primary care clinics in 3 Canadian provinces, Ontario, British Columbia, and Nova Scotia, from December 6, 2005, to May 5, 2006. Patients in clinic waiting rooms who consented to participate in the study were administered the Mini International Neuropsychiatric Interview (MINI) (N = 840). These patients' medical charts were then reviewed for evidence of previous diagnosis of a mood or anxiety disorder. Misdiagnosis was defined as cases for which a diagnosis was reached on the MINI but not in the patient's chart. Results: Of the 840 primary care patients assessed, 27.2%, 11.4%, 12.6%, 31.2%, and 16.5% of patients met criteria for major depressive disorder, bipolar disorder, panic disorder, generalized anxiety disorder, and social anxiety disorder, respectively. Misdiagnosis rates reached 65.9% for major depressive disorder, 92.7% for bipolar disorder, 85.8% for panic disorder, 71.0% for generalized anxiety disorder, and 97.8% for social anxiety disorder. Conclusions: With high prevalence rates and poor detection, there is an obvious need to enhance diagnostic screening in the primary care setting. PMID:21977354

  1. Microbiology of chronic suppurative otitis media at Queen Elizabeth Central Hospital, Blantyre, Malawi: A cross-sectional descriptive study.

    Science.gov (United States)

    Chirwa, M; Mulwafu, W; Aswani, J M; Masinde, P W; Mkakosya, R; Soko, D

    2015-12-01

    Chronic suppurative otitis media (CSOM) is still a significant health problem in developing countries. Therefore, it was pertinent to determine the local Malawian microbiology in order to guide adequate treatment, avoid complications, and provide records for future reference. The study sought to determine the CSOM-causing microorganisms at Queen Elizabeth Central Hospital in Blantyre, Malawi, and establish their relationship signs and symptoms, and with the demographic pattern of the study. This was a hospital-based cross-sectional descriptive study carried out at the ENT outpatient clinic and the Microbiology Department of Queen Elizabeth Central Hospital.The sample comprised 104 patients with unilateral or bilateral active CSOM, who met the inclusion criteria. All patients were evaluated through a detailed history and clinical examination. Pus samples from draining ears were collected by aspiration with a sterile pipette. The specimens were immediately sent for microbiological analysis. Data were analyzed using SPSS.version 20. The study found that Proteus mirabilis, Pseudomonas aeruginosa, and Staphylococcus aureus were the most prevalent aerobic bacteria, while Bacteroides spp. and Peptostreptococcus spp. were the commonest anaerobic bacteria causing CSOM. These CSOM-causing microorganisms were predominant among males aged 18 years and below. Some CSOM-causing microorganisms were-significantly more so than the others-characteristically associated with each of the following clinical features: quantity of pus drainage, mode of onset, otalgia, hearing loss, location of tympanic membrane perforation, and mucosal appearance.

  2. Factors affecting quality of life in breast cancer patients: A descriptive and cross-sectional study with review of literature

    Directory of Open Access Journals (Sweden)

    Neelam Sharma

    2017-01-01

    Full Text Available Objective: This descriptive and cross-sectional study was undertaken to determine the factors affecting quality of life (QOL in breast cancer patients. Methods: We collected data from 60 patients of carcinoma breast post modified radical mastectomy on radiotherapy in a tertiary care hospital. We included volunteered patients with a signed informed consent and at least 70 Karnofsky Performance Scale points. The data was gathered by interview technique using EORTC QLQ-C30 and QLQ-BR23 (Breast Cancer Module. Results: The mean age at presentation was 47.6 years (range 30-75 years.75% patients were of low socio-economic status and 63.3% belonged to rural areas. Younger Women in the age group of 30-39 years had faired worst on physical, social and emotional scores as compared to older women in the age group of 70-79 years. Other factors which affected Quality of Life of patients during treatment were stage of disease at presentation, performance score of the patients, socioeconomic status of disease at follow up. Conclusion: Age, Education status, Performance Score, Stage of disease at presentation and status of disease at last follow up are few factors which significantly affects QOL in Carcinoma breast patients though the treatment remains same. Advanced studies on individual quality of life factors affecting cancer would empower physicians for better personal care techniques and patients for easily overcoming the disease.

  3. Are they publishing? A descriptive cross-sectional profile and bibliometric analysis of the journal publication productivity of Italian physiotherapists.

    Science.gov (United States)

    Vercelli, Stefano; Ravizzotti, Elisa; Paci, Matteo

    2018-01-01

    In a clinical science-based profession such as physiotherapy, research is mandatory to update knowledge and to provide cost-effective, high quality treatments. This study aimed to provide point prevalence of Italian physiotherapists who are academics, holding a PhD degree, or being authors of scientific papers. The scientific journal productivity of physiotherapists was also thoroughly analyzed. A descriptive cross-sectional study was carried out on all Italian physiotherapists. Academics, postdoctoral research fellows, and PhD graduates were identified by searching the Italian Ministry of Education, University and Research (MIUR), Italian Society of Physiotherapy, and university websites. Then, authors of articles indexed in Scopus were searched. The following data were extracted: type of affiliation, authorship order, H-index, number of publications and citations, name of journals, year of publication, and journal's Impact Factor. The prevalence of academics, physiotherapists holding a PhD, or being author was 0.01%, 0.05%, and 0.56%, respectively. We identified 1083 papers co-authored by Italian physiotherapists, and their number has progressively increased over the years ( p  productivity ( p  total of 13,373 citations. Despite the low prevalence of faculty members and the reduced availability of PhD programs in Italy (forcing some students to study abroad), the quantity and quality of journal productivity is growing fast, and an increasing number of physiotherapists are involved in research activities.

  4. Triple-layer appearance of Brodmann area 4 at thin-section double inversion-recovery MR imaging.

    Science.gov (United States)

    Kim, Eung Yeop; Kim, Dong-Hyun; Chang, Jong-Hee; Yoo, Eunhye; Lee, Jae-Wook; Park, Hae-Jeong

    2009-02-01

    To investigate whether thin-section axial double inversion-recovery (DIR) brain magnetic resonance (MR) imaging at 3.0 T can help distinguish the primary motor cortex (PMC), or Brodmann area 4, from other selected cortical regions, including the primary sensory cortex (PSC), or Brodmann areas 1-3, on the basis of the presence of a "triple-layer" appearance. This prospective study was approved by the institutional review board; informed consent was obtained from patients. This study included 191 patients (94 female, age range, 5-80 years; 97 male, age range, 5-76 years) with normal findings at 3.0-T MR imaging. The presence or absence of a triple-layer appearance within selected cortical regions on DIR images was graded independently by two neuroradiologists as definitely present (grade 2), probably present (grade 1), or definitely absent (grade 0). Ten additional patients with tumors underwent DIR imaging and intraoperative cortical mapping for further validation of the PMC. A myelin-stained brain specimen image in a patient not imaged with DIR was correlated with a representative set of DIR images. A triple-layer appearance was found in the PMC bilaterally in 184 of 191 patients; grade 0 was assigned in only seven patients, who were all younger than 10 years. Grades were significantly lower in patients younger than 10 years than in others (P .0018). Interobserver agreement was excellent (weighted kappa = 0.843). The PMC determined on DIR images was confirmed with cortical mapping in all 10 patients with tumors. Triple-layer appearance was not present in the other cortical regions examined, including the PSC (P < .01). The triple-layer appearance on DIR images corresponded to the myelin band within the PMC present on the myelin-stained specimen image. A triple-layer appearance was found in the PMC at thin-section 3.0-T DIR imaging but not in other examined brain regions and therefore might be useful as an adjunct sign for identification of motor regions.

  5. Thin-section CT with air insufflation technique for bladder carcinoma: CT findings of superficial bladder carcinoma

    International Nuclear Information System (INIS)

    Kim, Hyun; Song, Ha Hun; Kim, Mi Hye; Lee, Eun Ja; Kim, Young Sin; Kang, Si Won; Shinn, Kyung Sub

    1994-01-01

    The staging of bladder carcinoma is a major determinant of operative management CT of bladder carcinoma has been widely used to diagnose external extension (pT3b and over), but tumors confined to the bladder wall (from pT1 to pT3a) are poorly delineated. The authors describe CT findings of the superficial bladder carcinoma (below T1, stage A) in thin-section CT with air insufflation technique (air insufflation-CT) to facilitate early detection and to aid correct staging of the superficial bladder carcinoma. The materials consisted of proved 24 cases (19 patients, single tumor: 16 patients, multiple tumors: 3 patients) of stage A bladder carcinomas. Air insufflation-CT was performed by the infusion of approximately 200 mL of air into the bladder via a Foley catheter. After the routine pelvic CT, bladder tumors were re-scanned with 1.5 to 5 mm thickness and intervals. The superficial bladder carcinoma were detected as nodular(5 cases, 20.8%), papillary(15 cases, 62.5%), pyramida(2 cases, 8.3%), and domed(2 cases, 8.3%) forms on air insufflation-CT. These tumors were classified into three types according to the size of the tumoral neck: type I(pedundulated polypoid tumor: 4 cases, 16.6%), type II(polypid tumor with short neck: 13 cases, 54.2%), and type III(sessile tumor: 7 cases, 29.2%). The mean size(tumoral width x height x base c neck/stalk) of the tumors was 22 x 20 x 16mm. The average tumoral sizes according to each type of the superficial tumors were type I: 22 x 25 x 6mm, type II: 23 x 22 x 18mm, and type III: 18 x 15 x 18mm. The mean width of the type I-II tumoral necks was 15mm. The mean length of the type I tumoral neck(pedicle) was 2.5mm. Papillary fronds of the tumors were seen in 10 cases(41.7%) of 24 superficial tumors. Outer margin of the involved bladder wall was smooth in all cases. Thin-section CT with air insufflation technique for bladder carcinoma was useful in tumoral demonstration, and characteristics of the superficial bladder carcinomas were

  6. Prevalence, patterns, and perceived value of complementary and alternative medicine among cancer patients: a cross-sectional, descriptive study.

    Science.gov (United States)

    Bahall, Mandreker

    2017-06-30

    Sophisticated conventional medicine (CM) has brought significant advances to cancer prevention, detection, and treatment. However, many cancer patients still turn to complementary and alternative medicine (CAM) treatment. This study explored the prevalence, patterns, and perceived value of CAM among cancer patients. This quantitative descriptive study was conducted between March 1, 2015, and July 31, 2015, among a cross-sectional, convenience sample of patients from the Oncology Department of San Fernando General Hospital in Trinidad and Tobago. Face-to-face interviews were conducted at the oncology clinic and treatment suite after obtaining informed consent. Data analysis included descriptive analysis, chi-square tests, and binary logistic regression analysis. The prevalence of CAM use among a sample of 350 cancer patients was 39.1% (39.6% for breast cancer, 44.4% for prostate cancer, 37% for ovarian cancer, and 38.7% for colon cancer patients). Herbs were the most common type of CAM used (93.4%), followed by spiritual therapy (73.7%). CAM use was more prevalent among females (68.6%), Indo-Trinidadians (63.5%), and patients aged 41-50 years (37.2%). The majority (70%-80%) rated CAM efficacy on perceived value. CAM was used mainly because of a desire to try anything that might help (67.6%), followed by it being congruent with the patients' beliefs (59.1%). Patients knew about CAM mainly through friends (69.3%) and family (69.3%). Most patients were generally satisfied (93.6%) and considered CAM helpful (89.8%), but the majority never informed their health care provider of CAM use (78.8%). Patients reported the simultaneous use of more than one type of CAM, without considering or knowing of possible side-effects. The perceived value of CAM included empowerment, control, cure, and improved quality of life. CAM use was associated with age, but no predictors of CAM use could be identified. Medicinal herbs and spiritual therapy are commonly used among cancer patients

  7. Micro-Spectroscopy as a Tool for Detecting Micron-Scale Mineral Variations Across a Rock Surface: An Example Using a Thin Section of Martian Meteorite ALH 84001

    Science.gov (United States)

    Dalton, J. Brad; Bishop, Janice L.

    2003-01-01

    Imaging spectroscopy is a powerful tool for mineral detection across broad spatial regions. A prototype micro-imaging spectrometer at NASA Ames is tested in this study on a scale of tens to hundreds of microns across rock surfaces. Initial measurements were performed in the visible spectral region on a thin section of martian meteorite ALH 84001.

  8. Thin-section chest CT findings in systemic lupus erythematosus with antiphospholipid syndrome: A comparison with systemic lupus erythematosus without antiphospholipid syndrome

    International Nuclear Information System (INIS)

    Oki, Hodaka; Aoki, Takatoshi; Saito, Kazuyoshi; Yamashita, Yoshiko; Hanamiya, Mai; Hayashida, Yoshiko; Tanaka, Yoshiya; Korogi, Yukunori

    2012-01-01

    Purpose: To assess thin-section chest CT findings in systemic lupus erythematosus (SLE) with antiphospholipid syndrome (APS), in comparison with SLE without APS. Materials and methods: We retrospectively reviewed the medical records and thin-section CT findings of 17 consecutive patients with an established diagnosis of SLE with APS, comparing with 37 consecutive SLE patients without APS, between 2004 and 2008, and patients who had other autoimmune disease, such as Sjögren syndrome, were excluded. No significant differences were seen between the two groups in age, gender, smoking habits, or history of steroid pulse and biological therapy. CT images of 2 mm thickness obtained with a 16- or 64-detector row CT were retrospectively evaluated by two radiologists in consensus on ultra high-resolution gray-scale monitors. Results: The frequency of thin-section CT abnormalities was higher in SLE with APS group (82%) than in SLE without APS group (43%). Ground-glass opacity (59%), architectural distortion (47%), reticulation (41%), enlarged peripheral pulmonary artery (29%), and mosaic attenuation (29%) were significantly more common in the SLE with APS group than in the SLE without APS group (Fisher's exact test, p < 0.01). Conclusion: SLE patients with APS have increased prevalence of thin-section chest CT abnormalities than those without APS.

  9. Bronchus-associated lymphoid tissue (BALT) lymphoma of the lung showing mosaic pattern of inhomogeneous attenuation on thin-section CT: a case report

    International Nuclear Information System (INIS)

    Lee, In Jae; Kim, Sung Hwan; Koo, Soo Hyun; Kim, Hyun Beom; Hwang, Dae Hyun; Lee, Kwan Seop; Lee, Yul; Jang, Kee Taek; Kim, Duck Hwan

    2000-01-01

    The authors present a case of histologically proven bronchus-associated lymphoid tissue (BALT) lymphoma of the lung in a patient with primary Sjogren's syndrome that manifested on thin-section CT scan as a mosaic pattern of inhomogeneous attenuation due to mixed small airway and infiltrative abnormalities

  10. Geochemical and mineralogical analysis of stone anchors from west coast of India: Provenance study using thin sections, XRF and SEM-EDS

    Digital Repository Service at National Institute of Oceanography (India)

    Tripati, S.; Mudholkar, A.V.; Vora, K.H.; Rao, B.R.; Gaur, A.S.; Sundaresh

    , sizes and weights ranging between 16 and 410 kg. Sixteen (10 Indo-Arabian, 4 Ringstone and 2 Single hole type) of the total of 269 stone anchors have been studied to determine provenance of rock through petrographic analysis using thin section studies, X...

  11. Thin-section computed tomography findings before and after azithromycin treatment of neutrophilic reversible lung allograft dysfunction

    Energy Technology Data Exchange (ETDEWEB)

    Jong, Pim A. de [Department of Radiology, Katholieke Universiteit Leuven, Leuven (Belgium); Lung Transplantation Unit, Katholieke Universiteit Leuven, Leuven (Belgium); University Medical Center Utrecht, Department of Radiology, Utrecht (Netherlands); Vos, Robin; Verleden, Geert M.; Vanaudenaerde, Bart M. [Lung Transplantation Unit, Katholieke Universiteit Leuven, Leuven (Belgium); Verschakelen, Johny A. [Department of Radiology, Katholieke Universiteit Leuven, Leuven (Belgium)

    2011-12-15

    Recently a novel subgroup of bronchiolitis obliterans syndrome (BOS) has been described in patients after lung transplantation with high neutrophil counts in broncho-alveolar lavage and recovery of lung functional decline with azithromycin treatment. We aimed to describe the thin-section computed tomography (CT) findings of these neutrophilic reversible allograft dysfunction (NRAD) patients before and after azithromycin. A cohort of 100 lung transplant recipients with BOS were treated with azithromycin and underwent lung function testing, broncho-alveolar lavage and CT before azithromycin treatment and during follow-up. The 200 CT data sets were scored for bronchial dilatation, mucus plugging, centrilobular abnormalities, airway wall thickening, consolidation, ground glass and end-expiratory air trapping. NRAD was characterized by more centrilobular abnormalities on CT (p = 0.03 for prevalence and p = 0.06 for severity) compared to non-responders. At follow-up NRAD patients showed improvement in all CT abnormalities including air trapping, but the degree of improvement in all CT abnormalities was significantly different between responders and non-responders (who showed progression of bronchus dilatation, consolidation and air trapping). Within BOS patients those with NRAD differ from azithromycin non-responders by more centrilobular abnormalities on CT before azithromycin and improvement in bronchus dilatation, consolidation and air trapping during treatment. (orig.)

  12. Uveal melanoma: evaluation of extrascleral extension using thin-section MR of the eye with surface coils.

    Science.gov (United States)

    Tartaglione, Tommaso; Pagliara, Monica Maria; Sciandra, Mariacarmela; Caputo, Carmela Grazia; Calandrelli, Rosalinda; Fabrizi, Gina; Gaudino, Simona; Blasi, Maria Antonietta; Colosimo, Cesare

    2014-10-01

    This study was done to evaluate the role of high-resolution magnetic resonance (MR) imaging with special surface coils in selecting the correct therapeutic approach (eye enucleation or follow-up) in patients with suspected extrascleral extension of uveal melanoma. This prospective study involved 12 patients with suspected extrascleral extension of uveal melanoma on orbital ultrasonography. All patients were studied with thin-section MR imaging of the eye using surface coils. High-resolution MR imaging of the eye excluded extrascleral extension of disease in 8/12 patients: in 4/8 cases it revealed vascular ectasia and in the other 4/8 cases the linear hypointensity of the sclera was unbroken. Seven of these eight patients were followed up by ultrasound, which showed stability of melanoma for at least 2 years, while the last patient underwent enucleation, and the histological examination confirmed the MR diagnosis. In 4/12 patients, high-resolution MR suggested a diagnosis of extrascleral extension of melanoma, which was confirmed at histological examination after enucleation. High-resolution MR imaging of the eye with surface coils allowed us to evaluate extrascleral extension of uveal melanoma and choose the correct therapeutic approach, avoiding unnecessary enucleation in 7/12 patients.

  13. The association between stressful life events and depressive symptoms among Cypriot university students: a cross-sectional descriptive correlational study

    Science.gov (United States)

    2013-01-01

    Background Previous findings suggest that stressful life events have a causal relationship with depressive symptoms. However, to date little is known concerning the contribution of the number and severity of recent stressful life events on the prevalence of depressive symptoms among university students. The aim of this study was to investigate the prevalence of depressive symptoms and its association with the number and the severity of self-reported stressful life events among university students in Cyprus. Methods A descriptive correlational design with cross sectional comparison was used. The CES-D scale was applied for the assessment of depressive symptoms and the LESS instrument for stressful life events. Both scales were completed anonymously and voluntarily by 1.500 students (response rate 85%). Results The prevalence of mild to moderate depressive symptoms [CES-D score between 16 and 21] and of clinically significant depressive symptoms [CES-D score ≥ 22] were 18.8% and 25.3% respectively. There were statistically significant differences in clinically significant depressive symptoms by gender, with higher rates among women (x2 = 8.53, df = 1, p = 0.003). Higher scores on the LESS scale were associated with more frequent reports of clinical depressive symptoms (x2 = 70.63, df = 4, p depressive symptoms (x2 = 40.06, df = 4, p  351, OR = 3.03 95% CI: 1.66, 5.39) were more likely to manifest clinical depressive symptoms. Conclusions The high frequency of occurrence of depressive symptoms among Cypriot university students, as well as the strong association with stressful life events, highlights the need for psychological empowerment strategies towards students by institutional counseling services. PMID:24304515

  14. Comparing antibiotic self-medication in two socio-economic groups in Guatemala City: a descriptive cross-sectional study.

    Science.gov (United States)

    Ramay, Brooke M; Lambour, Paola; Cerón, Alejandro

    2015-04-27

    Self-medication with antibiotics may result in antimicrobial resistance and its high prevalence is of particular concern in Low to Middle Income Countries (LMIC) like Guatemala. A better understanding of self-medication with antibiotics may represent an opportunity to develop interventions guiding the rational use of antibiotics. We aimed to compare the magnitude of antibiotic self-medication and the characteristics of those who self-medicate in two pharmacies serving disparate socio-economic communities in Guatemala City. We conducted a descriptive, cross-sectional study in one Suburban pharmacy and one City Center pharmacy in Guatemala City. We used a questionnaire to gather information about frequency of self-medication, income and education of those who self-medicate. We compared proportions between the two pharmacies, using two-sample z-test as appropriate. Four hundred and eighteen respondents completed the survey (221 in the Suburban pharmacy and 197 in the City Center pharmacy). Most respondents in both pharmacies were female (70%). The reported monthly income in the suburban pharmacy was between $1,250.00-$2,500.00, the city-center pharmacy reported a monthly income between $125.00- $625.00 (p self-medication was 79% in the Suburban pharmacy and 77% in City Center pharmacy. In both settings, amoxicillin was reported as the antibiotic most commonly used. High proportions of self-medication with antibiotics were reported in two pharmacies serving disparate socio-economic groups in Guatemala City. Additionally, self-medicating respondents were most often women and most commonly self-medicated with amoxicillin. Our findings support future public health interventions centered on the regulation of antibiotic sales and on the potential role of the pharmacist in guiding prescription with antibiotics in Guatemala.

  15. Learning by playing: A cross-sectional descriptive study of nursing students' experiences of learning clinical reasoning.

    Science.gov (United States)

    Koivisto, Jaana-Maija; Multisilta, Jari; Niemi, Hannele; Katajisto, Jouko; Eriksson, Elina

    2016-10-01

    Clinical reasoning is viewed as a problem-solving activity; in games, players solve problems. To provide excellent patient care, nursing students must gain competence in clinical reasoning. Utilising gaming elements and virtual simulations may enhance learning of clinical reasoning. To investigate nursing students' experiences of learning clinical reasoning process by playing a 3D simulation game. Cross-sectional descriptive study. Thirteen gaming sessions at two universities of applied sciences in Finland. The prototype of the simulation game used in this study was single-player in format. The game mechanics were built around the clinical reasoning process. Nursing students from the surgical nursing course of autumn 2014 (N=166). Data were collected by means of an online questionnaire. In terms of the clinical reasoning process, students learned how to take action and collect information but were less successful in learning to establish goals for patient care or to evaluate the effectiveness of interventions. Learning of the different phases of clinical reasoning process was strongly positively correlated. The students described that they learned mainly to apply theoretical knowledge while playing. The results show that those who played digital games daily or occasionally felt that they learned clinical reasoning by playing the game more than those who did not play at all. Nursing students' experiences of learning the clinical reasoning process by playing a 3D simulation game showed that such games can be used successfully for learning. To ensure that students follow a systematic approach, the game mechanics need to be built around the clinical reasoning process. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. Exploratory study into awareness of heart disease and health care seeking behavior among Emirati women (UAE) - Cross sectional descriptive study.

    Science.gov (United States)

    Khan, Sarah; Ali, Syed Adnan

    2017-09-26

    Cardiovascular disease was the leading cause of death among women in the United Arab Emirates (UAE) in 2010. Heart attacks usually happen in older women thus symptoms of heart disease may be masked by symptoms of chronic diseases, which could explain the delay in seeking health care and higher mortality following an ischaemic episode among women. This study seeks to a) highlight the awareness of heart diseases among Emirati women and b) to understand Emirati women's health care seeking behaviour in UAE. A cross sectional, descriptive study was conducted using a survey instrument adapted from the American Heart Association National survey. A convenience sample of 676 Emirati women between the ages of 18-55 years completed the questionnaire. The study showed low levels of awareness of heart disease and associated risk factors in Emirati women; only 19.4% participants were found to be aware of heart diseases. Awareness levels were highest in Dubai (OR 2.18, p seeking health care. Interestingly, just 49.1% Emirati women believed that good quality and affordable health care was available in the UAE. Only 28.8% of the participants believed there were sufficient female doctors to respond to health needs of women in UAE. Furthermore, only 36.7% Emirati women chose to be treated in the UAE over treatment in other countries. Emirati women clearly lack the knowledge on severity and vulnerability to heart disease in the region that is essential to improve cardiovascular related health outcomes. This study has identified the need for wider outreach that focuses on gender and age specific awareness on heart disease risks and symptoms. The study has also highlighted potential modifiable barriers in seeking health care that should be overcome to reduce morbidity and mortality due to heart disease among national women of UAE.

  17. Health and Ethical Consequences of Outsourcing Pivotal Clinical Trials to Latin America: A Cross-Sectional, Descriptive Study.

    Science.gov (United States)

    Homedes, Núria; Ugalde, Antonio

    2016-01-01

    The implications of conducting clinical trials in low and middle income countries on the financial accessibility and safety of the pharmaceutical products available in those markets have not been studied. Regulatory practices and ethical declarations lead to the commercialization of the new products, referred to as New Molecular Entities (NMEs), in the countries where tested as soon as they are approved in high surveillance countries. Patients and patients' associations use the Latin American courts to access new and expensive treatments, regardless of their safety profile and therapeutic value. Cross-sectional, descriptive study. To determine the therapeutic value and safety profile of the NMEs approved by the Food and Drug Administration (FDA) in 2011 and 2012 that had been tested in Latin America, and the implications of their market approval for the pharmaceutical budgets in the countries where tested. Latin America. To assess the therapeutic value and safety of the NMEs commercialized in the different countries we used f independent drug bulletins. The prices of the NMEs for the consumers were obtained from the pharmaceutical price observatories of the countries were the medicines had been tested. If the price was not available in the observatories, it was obtained from pharmaceutical distributors. We used the countries' minimum wage and per capita income to calculate the financial accessibility of a course of treatment with the NMEs. We found that 33 NMEs approved by the FDA in 2011 and 2012 have been tested in Latin America. Of these, 26 had been evaluated by independent drug bulletins and only five were found to add some value to a subset of patients and had significant side-effects. The pharmaceutical prices were very high, varied widely across countries and were unrelated to the countries' income per capita or minimum wage. The implementation of clinical trials in Latin America results in the commercialization of medicines with questionable safety

  18. Social context, diversity and risk among women who inject drugs in Vietnam: descriptive findings from a cross-sectional survey.

    Science.gov (United States)

    Khuat, Oanh T H; Morrow, Martha; Nguyen, Trang N N; Armstrong, Gregory

    2015-10-16

    Women who inject drugs (WWID) are neglected globally in research and programming yet may be likelier than males to practise sexual and injecting risks and be infected with HIV and more stigmatised but seek fewer services. Little is known about characteristics, practices and nexus between drugs and sex work of WWID in Vietnam, where unsafe injecting has driven HIV transmission, and commercial sex and inconsistent condom use are prevalent. This was the first quantitative investigation of Vietnamese WWID recruited as injecting drug users. This article summarises descriptive findings. A cross-sectional survey was conducted among WWID in Hanoi (n = 203) and Ho Chi Minh City (HCMC) (n = 200) recruited using respondent-driven sampling. Characteristics varied within and between sites. Twenty-two percent in Hanoi and 47.5 % in HCMC had never sold sex. Almost all commenced with smoking heroin, some as children. Most injected frequently, usually alone, although 8 % (Hanoi) and 18 % (HCMC) shared equipment in the previous month. Some had sex--and sold it--as children; most had multiple partners. Condom use was high with clients but very low with intimate partners, often injecting drug users. HIV knowledge was uneven, and large minorities were not tested recently (or ever) for HIV. Nearly all perceived intense gender-related stigma, especially for drug use. This ground-breaking study challenges assumptions about characteristics and risks based on anecdotal evidence and studies among men. Most WWID were vulnerable to sexual HIV transmission from intimate partners. Interventions should incorporate broader sociocultural context to protect this highly stigmatised population.

  19. Cross-sections of residual nuclei from deuteron irradiation of thin thorium target at energy 7 GeV

    Directory of Open Access Journals (Sweden)

    Vespalec Radek

    2017-01-01

    Full Text Available The residual nuclei yields are of great importance for the estimation of basic radiation-technology characteristics (like a total target activity, production of long-lived nuclides etc. of accelerator driven systems planned for transmutation of spent nuclear fuel and for a design of radioisotopes production facilities. Experimental data are also essential for validation of nuclear codes describing various stages of a spallation reaction. Therefore, the main aim of this work is to add new experimental data in energy region of relativistic deuterons, as similar data are missing in nuclear databases. The sample made of thin natural thorium foil was irradiated at JINR Nuclotron accelerator with a deuteron beam of the total kinetic energy 7 GeV. Integral number of deuterons was determined with the use of aluminum activation detectors. Products of deuteron induced spallation reaction were qualified and quantified by means of gamma-ray spectroscopy method. Several important spectroscopic corrections were applied to obtain results of high accuracy. Experimental cumulative and independent cross-sections were determined for more than 80 isotopes including meta-stable isomers. The total uncertainty of results rarely exceeded 9%. Experimental results were compared with MCNP6.1 Monte-Carlo code predictions. Generally, experimental and calculated cross-sections are in a reasonably good agreement, with the exception of a few light isotopes in a fragmentation region, where the calculations are highly under-estimated. Measured data will be useful for future development of high-energy nuclear codes. After completion, final data will be added into the EXFOR database.

  20. Feeding practices among children attending child welfare clinics in Ragama MOH area: a descriptive cross-sectional study

    Directory of Open Access Journals (Sweden)

    Perera Priyantha J

    2011-11-01

    Full Text Available Abstract Background Feeding during early childhood is important for normal physical and mental growth as well as for health in later life. Currently, Sri Lanka has adopted the WHO recommendation of exclusive breastfeeding for six months, followed by addition of complementary feeds thereafter, with continuation of breastfeeding up to or beyond two years. This study was conducted to evaluate the current feeding practices among Sri Lankan children during early childhood. Methods This study was a descriptive cross-sectional study conducted in the Ragama Medical Officer of Health (MOH area. It was conducted between 10 August 2010 and 30 October 2010. Children between the ages of 24 and 60 months, attending child welfare clinics, were included in the study on consecutive basis. An interviewer-administered questionnaire was used to collect data regarding sociodemographic characteristics and feeding practices. Results There were 208 boys and 202 girls in the study population. Of them, 255 (62.2% were exclusively breastfed up to 6 months. Younger children had a statistically significant, higher rate of exclusive breastfeeding compared to older children. Three hundred and fifty one (85.6% children had received infant formula, and it was started before the age of 6 months in 61 children, and in 212 before one year. Sugar was added to infant formula in 330 (80.4% children, and out of them 144 had sugar added within first year of life. Complementary foods were started before 4 months in 29 (7% children. Of the 410 children, 294 (71.7% were breastfed beyond 2 years and 41.6% of them were breastfed at regular intervals throughout the day. Three hundred and thirty eight (82.6% children were receiving overnight feeding of either breast milk or infant formula even after 2 years. Conclusions Though a high rate of exclusive breastfeeding was observed in this study population, there are many other issues related to feeding during the early years of life that need

  1. Airplane pilot mental health and suicidal thoughts: a cross-sectional descriptive study via anonymous web-based survey.

    Science.gov (United States)

    Wu, Alexander C; Donnelly-McLay, Deborah; Weisskopf, Marc G; McNeely, Eileen; Betancourt, Theresa S; Allen, Joseph G

    2016-12-15

    The Germanwings Flight 9525 crash has brought the sensitive subject of airline pilot mental health to the forefront in aviation. Globally, 350 million people suffer from depression-a common mental disorder. This study provides further information on this important topic regarding mental health especially among female airline pilots. This is the first study to describe airline pilot mental health-with a focus on depression and suicidal thoughts-outside of the information derived from aircraft accident investigations, regulated health examinations, or identifiable self-reports, which are records protected by civil aviation authorities and airline companies. This is a descriptive cross-sectional study via an anonymous web-based survey administered between April and December 2015. Pilots were recruited from unions, airline companies, and airports via convenience sampling. Data analysis included calculating absolute number and prevalence of health characteristics and depression scores. One thousand eight hundred thirty seven (52.7%) of the 3485 surveyed pilots completed the survey, with 1866 (53.5%) completing at least half of the survey. 233 (12.6%) of 1848 airline pilots responding to the Patient Health Questionnaire 9 (PHQ-9), and 193 (13.5%) of 1430 pilots who reported working as an airline pilot in the last seven days at time of survey, met depression threshold-PHQ-9 total score ≥ 10. Seventy-five participants (4.1%) reported having suicidal thoughts within the past two weeks. We found a significant trend in proportions of depression at higher levels of use of sleep-aid medication (trend test z = 6.74, p < 0.001) and among those experiencing sexual harassment (z = 3.18, p = 0.001) or verbal harassment (z = 6.13, p < 0.001). Hundreds of pilots currently flying are managing depressive symptoms perhaps without the possibility of treatment due to the fear of negative career impacts. This study found 233 (12.6%) airline pilots meeting

  2. HIV related risk behaviours among taxi drivers and their assistants in Addis Ababa, Ethiopia: descriptive cross-sectional survey

    Science.gov (United States)

    2014-01-01

    Background Risk taking behaviours in relation to HIV among the mobile population is a growing public health concern in many developing countries, including Ethiopia. The aim of this study was to describe risky sexual behaviours and associated factors among male taxi drivers and assistants in Addis Ababa. Methods A descriptive cross-sectional survey design with multistage cluster sampling procedure was employed to select 615 individuals for interview. Results Seventy six percent of the respondents were sexually active. Nearly 31% of the respondents reported casual sex and 7% of them did not use a condom with their most recent casual sex partner. More than half (58.5%) of the respondents had no condom use efficacy. Condom breakage and/or slippage during sex had been encountered by 44% of respondents with casual partners and sex during menstruation had ever occurred among 17% of respondents. Eleven percent had experienced sex with female sex workers. Thirty-three percent of the respondents were unfaithful to their spouse/steady partners. Multivariate analysis revealed that living with parents [AOR 95% CI; 2(1.14-3.60)], non-khat chewers [AOR 95% CI; 3.7(2.13-6.31)], never taken VCT [AOR 95% CI; 3.5(1.84-6.72)], middle-class monthly cash gain [AOR 95% CI; 0.5(0.25-0.98)] and more years of experience working on a taxi [AOR 95% CI; 0.17(0.60-0.47)] were statistically significant to influence lifetime abstinence. Non-khat chewers [AOR 95% CI; 0.53(0.37-0.78)], never taken VCT [AOR 95% CI; 0.54(0.36-0.88)] and higher monthly cash gain [AOR 95% CI; 2.9(1.14-7.19)] had a statistically significant association with condom use efficacy. Living with parents [AOR 95% CI; 2(1.31-3.72)], living with friends [AOR 95% CI; 6.4(3.13-12.89)] and non-khat chewers [AOR 95% CI; 2(1.34-3.53)] were risk factors found to be associated with faithfulness. Conclusions Risky sexual behaviours in this sub-population were considerable and associated factors were found to be multidimensional

  3. Prevalence of adherence to treatment in homebound elderly people in primary health care: a descriptive, cross-sectional, multicentre study.

    Science.gov (United States)

    Cárdenas-Valladolid, Juan; Martín-Madrazo, Carmen; Salinero-Fort, Miguel A; Carrillo de-Santa Pau, Enrique; Abánades-Herranz, Juan C; de Burgos-Lunar, Carmen

    2010-08-01

    Adherence to the therapeutic plan is one of the most important health issues in terms of treatment efficacy, healthcare costs and patient safety. Unfortunately, homebound elderly patients are especially vulnerable to nonadherence because they have higher morbidity rates combined with cognitive and social problems that hinder their correct use of drugs. The level of therapeutic adherence in homebound elderly people has not been adequately studied. To estimate the prevalence of therapeutic adherence, using the Morisky-Green test, in homebound elderly patients taking polypharmacy (defined as use of four or more drugs), and to study the factors associated with adherence. This was a descriptive, cross-sectional, multicentre study. A total of 327 patients were selected by random start systematic sampling from the total number of homebound patients taking four or more drugs in Healthcare Area 4 of the Madrid Autonomous Region, Spain. Through an in-home survey of patients and their caregivers, information was gathered on sociodemographic data, co-morbidities, number of hospital admissions, responsibility for purchasing and preparation of the medication, level of cognitive impairment (Pfeiffer questionnaire), functional dependence in activities of daily living (Katz Index), knowledge of the disease (Batalla test), adherence to treatment (Morisky-Green test), visual and auditory perception, and caregiver burden (Zarit interview). Of the homebound patients, 65.7% (95% CI 60.6, 70.9) had good adherence to treatment. The variables most negatively associated with therapeutic adherence, after adjustment for age, sex, number of drugs, knowledge of the disease, and cognitive function, were a large caregiver burden (odds ratio [OR] 3.09; 95% CI 1.75, 5.48) and impaired hearing (OR 2.00; 95% CI 1.17, 3.40). There was also a trend toward a positive association between nonadherence and patients aged <85 years (OR 1.57; 95% CI 0.93, 2.65) and patients who had nine or more drug

  4. Body Image Perceptions of Persons With a Stoma and Their Partners: A Descriptive, Cross-sectional Study.

    Science.gov (United States)

    Aktas, Dilek; Gocman Baykara, Zehra

    2015-05-01

    The body image perceptions of persons with a stoma and their partners are rarely examined and have yet to be evaluated in a Turkish sample. Using convenience sampling methods, a descriptive, cross-sectional study was conducted among individuals receiving treatment at the authors' stomatherapy unit between March 1, 2012 and May 31, 2012 to assess the effect of the stoma on self-image and partner perception. Eligible participants had to be >18 years of age, married, and with an abdominal stoma (colostomy, urostomy, or ileostomy) for at least 2 months. Data were obtained through separate (patient or partner), face-to-face, 30-minute to 45-minute interviews using the appropriate questionnaire. Questionnaire items assessed demographic variables and patient/partner feelings toward the ostomate's body using the Body Cathexis Scale (BCS) and author-developed questionnaires comprising statements eliciting individual responses (agree, disagree, undecided) regarding their feelings toward the stoma. Data were tabulated and analyzed using percentile distributions, and Mann Whitney U and Kruskal Wallis H tests were performed (Bonferroni correction was applied). Sixty (60) patients (25 women, 35 men, mean age 56.01 ± 10.1 years; 25 with an ileostomy, 30 with a colostomy, 5 with an ileostomy) participated, along with their 60 heterosexual partners (mean age 54.56 ± 10.25 years) married a mean of 33.06 ± 11.03 years. Mean patient BCS score was 133.15 ± 20.58 (range 40--low perception--to 200--high perception). Mean BCS score of patients whose partner helped in stoma care was significantly higher (136.04) than those whose partners did not (120.27) (P = 0.033). Patients who consulted their partners' opinions on stoma creation and participation in care had significantly higher BCS scores (P stoma had a negative effect on their relationship were significantly lower (P = 0.040); patients' perceptions toward their bodies were parallel to their partners'. Mean BCS score of patients

  5. Access to and utilisation of GP services among Burmese migrants in London: a cross-sectional descriptive study.

    Science.gov (United States)

    Aung, Nyein Chan; Rechel, Bernd; Odermatt, Peter

    2010-10-12

    An estimated 10,000 Burmese migrants are currently living in London. No studies have been conducted on their access to health services. Furthermore, most studies on migrants in the United Kingdom (UK) have been conducted at the point of service provision, carrying the risk of selection bias. Our cross-sectional study explored access to and utilisation of General Practice (GP) services by Burmese migrants residing in London. We used a mixed-method approach: a quantitative survey using self-administered questionnaires was complemented by qualitative in-depth interviews for developing the questionnaire and triangulating the findings of the survey. Overall, 137 questionnaires were received (a response rate of 57%) and 11 in-depth interviews conducted. The main outcome variables of the study included GP registration, barriers towards registration, GP consultations, barriers towards consultations, and knowledge on entitlements to health care. Quantitative data were analysed using descriptive statistics, association tests, and a multivariate analysis using logistic regression. The qualitative information was analysed using content analysis. The respondents were young, of roughly equal gender (51.5% female), well educated, and had a fair level of knowledge on health services in the UK. Although the GP registration rate was relatively high (80%, 109 out of 136), GP service utilisation during the last episode of illness, at 56.8% (54 out of 95), was low. The statistical analysis showed that age being younger than 35 years, lacking prior overseas experience, having an unstable immigration status, having a shorter duration of stay, and resorting to self-medication were the main barriers hindering Burmese migrants from accessing primary health care services. These findings were corroborated by the in-depth interviews. Our study found that having formal access to primary health care was not sufficient to ensure GP registration and health care utilisation. Some respondents faced

  6. Access to and utilisation of GP services among Burmese migrants in London: a cross-sectional descriptive study

    Directory of Open Access Journals (Sweden)

    Rechel Bernd

    2010-10-01

    Full Text Available Abstract Background An estimated 10,000 Burmese migrants are currently living in London. No studies have been conducted on their access to health services. Furthermore, most studies on migrants in the United Kingdom (UK have been conducted at the point of service provision, carrying the risk of selection bias. Our cross-sectional study explored access to and utilisation of General Practice (GP services by Burmese migrants residing in London. Methods We used a mixed-method approach: a quantitative survey using self-administered questionnaires was complemented by qualitative in-depth interviews for developing the questionnaire and triangulating the findings of the survey. Overall, 137 questionnaires were received (a response rate of 57% and 11 in-depth interviews conducted. The main outcome variables of the study included GP registration, barriers towards registration, GP consultations, barriers towards consultations, and knowledge on entitlements to health care. Quantitative data were analysed using descriptive statistics, association tests, and a multivariate analysis using logistic regression. The qualitative information was analysed using content analysis. Results The respondents were young, of roughly equal gender (51.5% female, well educated, and had a fair level of knowledge on health services in the UK. Although the GP registration rate was relatively high (80%, 109 out of 136, GP service utilisation during the last episode of illness, at 56.8% (54 out of 95, was low. The statistical analysis showed that age being younger than 35 years, lacking prior overseas experience, having an unstable immigration status, having a shorter duration of stay, and resorting to self-medication were the main barriers hindering Burmese migrants from accessing primary health care services. These findings were corroborated by the in-depth interviews. Conclusions Our study found that having formal access to primary health care was not sufficient to ensure GP

  7. Psychiatric Disorders in Drop out from Educational Attainment Attending Mental Health Facilities: A Descriptive Cross Sectional Study.

    Science.gov (United States)

    Islam, M S; Rashid, M H; Uddin, M N; Singha, R K; Rahman, M A; Haque, M A; Saha, C K; Abedin, M F

    2017-07-01

    Studies of the impact of mental disorders on educational attainment are rare. Mental disorders, those beginning in childhood or adolescence may increase the risk of early drop out from education. The latter has been shown to have adverse life-course consequences on individuals such as greater demand on social welfare entitlements. A descriptive cross sectional study was carried out at the department of Psychiatry, Comilla Medical College, Comilla, Bangladesh. All cases were selected from patients attending at Comilla Medical College Hospital and Private Mental Health Facilities in Comilla City from March 2015 to February 2016. We found out the psychiatric disorders and socio-demographic status of patients with educational drop out over the early life course. A total of 50 dropout patients aged 10 to 30 years who fullfiled the enrolment criteria included in the study. Sociodemographic questionnaires, diagnostic information (DSM-5 and ICD-10) as well as an account of a various level of education were used as research instruments. The Frequency tables, summary tables and appropriate graphs were prepared to describe the population characteristics and study finding. The most of the psychiatric morbidity presents in male (62%) and age group of 18-24 years (54%). In this study, anxiety disorders was 8%, behaviour/ impulse control disorders was 8%, mood disorders was 16%, substance use disorders was 24%, schizophrenia spectrum disorders was 12% and composite psychiatric disorders was 32%. Among drop out patient's non- completion of primary education was 14%, non-completion of secondary education was 20%, non- completion of higher secondary education was 24%, not entry to tertiary education was 12% and non-completion of tertiary education was 30%. Among behaviour/impulse control disorders non-completion of primary education was 6%, substance use disorders non-completion of higher secondary education was 10%, mood disorder both non-completion of higher secondary education

  8. Phase Composition Maps integrate mineral compositions with rock textures from the micro-meter to the thin section scale

    Science.gov (United States)

    Willis, Kyle V.; Srogi, LeeAnn; Lutz, Tim; Monson, Frederick C.; Pollock, Meagen

    2017-12-01

    Textures and compositions are critical information for interpreting rock formation. Existing methods to integrate both types of information favor high-resolution images of mineral compositions over small areas or low-resolution images of larger areas for phase identification. The method in this paper produces images of individual phases in which textural and compositional details are resolved over three orders of magnitude, from tens of micrometers to tens of millimeters. To construct these images, called Phase Composition Maps (PCMs), we make use of the resolution in backscattered electron (BSE) images and calibrate the gray scale values with mineral analyses by energy-dispersive X-ray spectrometry (EDS). The resulting images show the area of a standard thin section (roughly 40 mm × 20 mm) with spatial resolution as good as 3.5 μm/pixel, or more than 81 000 pixels/mm2, comparable to the resolution of X-ray element maps produced by wavelength-dispersive spectrometry (WDS). Procedures to create PCMs for mafic igneous rocks with multivariate linear regression models for minerals with solid solution (olivine, plagioclase feldspar, and pyroxenes) are presented and are applicable to other rock types. PCMs are processed using threshold functions based on the regression models to image specific composition ranges of minerals. PCMs are constructed using widely-available instrumentation: a scanning-electron microscope (SEM) with BSE and EDS X-ray detectors and standard image processing software such as ImageJ and Adobe Photoshop. Three brief applications illustrate the use of PCMs as petrologic tools: to reveal mineral composition patterns at multiple scales; to generate crystal size distributions for intracrystalline compositional zones and compare growth over time; and to image spatial distributions of minerals at different stages of magma crystallization by integrating textures and compositions with thermodynamic modeling.

  9. Oxygen-enhanced MRI for patients with connective tissue diseases: Comparison with thin-section CT of capability for pulmonary functional and disease severity assessment

    Energy Technology Data Exchange (ETDEWEB)

    Ohno, Yoshiharu, E-mail: yosirad@kobe-u.ac.jp [Advanced Biomedical Imaging Research Center, Kobe University Graduate School of Medicine, Kobe, Hyogo (Japan); Division of Functional and Diagnostic Imaging Research, Department of Radiology, Kobe University Graduate School of Medicine, Kobe, Hyogo (Japan); Nishio, Mizuho [Advanced Biomedical Imaging Research Center, Kobe University Graduate School of Medicine, Kobe, Hyogo (Japan); Division of Functional and Diagnostic Imaging Research, Department of Radiology, Kobe University Graduate School of Medicine, Kobe, Hyogo (Japan); Koyama, Hisanobu [Division of Radiology, Department of Radiology, Kobe University Graduate School of Medicine, Kobe, Hyogo (Japan); Yoshikawa, Takeshi; Matsumoto, Sumiaki [Advanced Biomedical Imaging Research Center, Kobe University Graduate School of Medicine, Kobe, Hyogo (Japan); Division of Functional and Diagnostic Imaging Research, Department of Radiology, Kobe University Graduate School of Medicine, Kobe, Hyogo (Japan); Seki, Shinichiro [Division of Radiology, Department of Radiology, Kobe University Graduate School of Medicine, Kobe, Hyogo (Japan); Tsubakimoto, Maho [Division of Radiology, Department of Radiology, Kobe University Graduate School of Medicine, Kobe, Hyogo (Japan); Department of Radiology, Graduate School of Medical Science, University of the Ryukyus, Nakagami-Gun, Okinawa (Japan); Sugimura, Kazuro [Division of Radiology, Department of Radiology, Kobe University Graduate School of Medicine, Kobe, Hyogo (Japan)

    2014-02-15

    Purpose: To prospectively and directly compare oxygen-enhanced (O{sub 2}-enhanced) MRI with thin-section CT for pulmonary functional loss and disease severity assessment in connective tissue disease (CTD) patients with interstitial lung disease (ILD). Materials and methods: Thin-section CT, O{sub 2}-enhanced MRI, pulmonary function test and serum KL-6 were administered to 36 CTD patients with ILD (23 men, 13 women; mean age: 63.9 years) and nine CTD patients without ILD (six men, and three women; mean age: 62.0 years). A relative-enhancement ratio (RER) map was generated from O{sub 2}-enhanced MRI and mean relative enhancement ratio (MRER) for each subject was calculated from all ROI measurements. CT-assessed disease severity was evaluated with a visual scoring system from each of the thin-section CT data. MRER and CT-assessed disease severities of CTD patients with and without ILD were then statistically compared. To assess capability for pulmonary functional loss and disease severity assessment in CTD patients, correlations of MRER and CT-assessed disease severity with pulmonary functional parameters and serum KL-6 in all subjects were statistically determined. Results: MRER and CT-assessed disease severity showed significant differences between CTD patients with (MRER: 0.15 ± 0.08, CT-assessed disease severity: 13.0 ± 7.4%) and without ILD (MRER: 0.25 ± 0.06, p = 0.0011; CT-assessed disease severity: 1.6 ± 1.6%, p < 0.0001). MRER and CT-assessed disease severity correlated significantly with pulmonary functional parameters and serum KL-6 in all subjects (0.61 ≤ r ≤ 0.79, p < 0.05). Conclusion: O{sub 2}-enhanced MRI was found to be as useful as thin-section CT for pulmonary functional loss and disease severity assessment of CTD patients with ILD.

  10. Oxygen-enhanced MRI for patients with connective tissue diseases: Comparison with thin-section CT of capability for pulmonary functional and disease severity assessment

    International Nuclear Information System (INIS)

    Ohno, Yoshiharu; Nishio, Mizuho; Koyama, Hisanobu; Yoshikawa, Takeshi; Matsumoto, Sumiaki; Seki, Shinichiro; Tsubakimoto, Maho; Sugimura, Kazuro

    2014-01-01

    Purpose: To prospectively and directly compare oxygen-enhanced (O 2 -enhanced) MRI with thin-section CT for pulmonary functional loss and disease severity assessment in connective tissue disease (CTD) patients with interstitial lung disease (ILD). Materials and methods: Thin-section CT, O 2 -enhanced MRI, pulmonary function test and serum KL-6 were administered to 36 CTD patients with ILD (23 men, 13 women; mean age: 63.9 years) and nine CTD patients without ILD (six men, and three women; mean age: 62.0 years). A relative-enhancement ratio (RER) map was generated from O 2 -enhanced MRI and mean relative enhancement ratio (MRER) for each subject was calculated from all ROI measurements. CT-assessed disease severity was evaluated with a visual scoring system from each of the thin-section CT data. MRER and CT-assessed disease severities of CTD patients with and without ILD were then statistically compared. To assess capability for pulmonary functional loss and disease severity assessment in CTD patients, correlations of MRER and CT-assessed disease severity with pulmonary functional parameters and serum KL-6 in all subjects were statistically determined. Results: MRER and CT-assessed disease severity showed significant differences between CTD patients with (MRER: 0.15 ± 0.08, CT-assessed disease severity: 13.0 ± 7.4%) and without ILD (MRER: 0.25 ± 0.06, p = 0.0011; CT-assessed disease severity: 1.6 ± 1.6%, p < 0.0001). MRER and CT-assessed disease severity correlated significantly with pulmonary functional parameters and serum KL-6 in all subjects (0.61 ≤ r ≤ 0.79, p < 0.05). Conclusion: O 2 -enhanced MRI was found to be as useful as thin-section CT for pulmonary functional loss and disease severity assessment of CTD patients with ILD

  11. Factors associated with anxiety and depression among type 2 diabetes outpatients in Malaysia: a descriptive cross-sectional single-centre study

    OpenAIRE

    Ganasegeran, Kurubaran; Renganathan, Pukunan; Manaf, Rizal Abdul; Al-Dubai, Sami Abdo Radman

    2014-01-01

    Objective To determine the prevalence and factors associated with anxiety and depression among type 2 diabetes outpatients in Malaysia. Design Descriptive, cross-sectional single-centre study with universal sampling of all patients with type 2 diabetes. Setting Endocrinology clinic of medical outpatient department in a Malaysian public hospital. Participants All 169 patients with type 2 diabetes (men, n=99; women, n=70) aged between 18 and 90 years who acquired follow-up treatment from the en...

  12. Nuclear-fuel-cycle risk assessment: descriptions of representative non-reactor facilities. Sections 1-14

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, K.J.

    1982-09-01

    The Fuel Cycle Risk Assessment Program was initiated to provide risk assessment methods for assistance in the regulatory process for nuclear fuel cycle facilities other than reactors. This report, the first from the program, defines and describes fuel cycle elements that are being considered in the program. One type of facility (and in some cases two) is described that is representative of each element of the fuel cycle. The descriptions are based on real industrial-scale facilities that are current state-of-the-art, or on conceptual facilities where none now exist. Each representative fuel cycle facility is assumed to be located on the appropriate one of four hypothetical but representative sites described. The fuel cycles considered are for Light Water Reactors with once-through flow of spent fuel, and with plutonium and uranium recycle. Representative facilities for the following fuel cycle elements are described for uranium (or uranium plus plutonium where appropriate): mining, milling, conversion, enrichment, fuel fabrication, mixed-oxide fuel refabrication, fuel reprocessing, spent fuel storage, high-level waste storage, transuranic waste storage, spent fuel and high-level and transuranic waste disposal, low-level and intermediate-level waste disposal, and transportation. For each representative facility the description includes: mainline process, effluent processing and waste management, facility and hardware description, safety-related information and potential alternative concepts for that fuel cycle element. The emphasis of the descriptive material is on safety-related information. This includes: operating and maintenance requirements, input/output of major materials, identification and inventories of hazardous materials (particularly radioactive materials), unit operations involved, potential accident driving forces, containment and shielding, and degree of hands-on operation.

  13. Nuclear-fuel-cycle risk assessment: descriptions of representative non-reactor facilities. Sections 1-14

    International Nuclear Information System (INIS)

    Schneider, K.J.

    1982-09-01

    The Fuel Cycle Risk Assessment Program was initiated to provide risk assessment methods for assistance in the regulatory process for nuclear fuel cycle facilities other than reactors. This report, the first from the program, defines and describes fuel cycle elements that are being considered in the program. One type of facility (and in some cases two) is described that is representative of each element of the fuel cycle. The descriptions are based on real industrial-scale facilities that are current state-of-the-art, or on conceptual facilities where none now exist. Each representative fuel cycle facility is assumed to be located on the appropriate one of four hypothetical but representative sites described. The fuel cycles considered are for Light Water Reactors with once-through flow of spent fuel, and with plutonium and uranium recycle. Representative facilities for the following fuel cycle elements are described for uranium (or uranium plus plutonium where appropriate): mining, milling, conversion, enrichment, fuel fabrication, mixed-oxide fuel refabrication, fuel reprocessing, spent fuel storage, high-level waste storage, transuranic waste storage, spent fuel and high-level and transuranic waste disposal, low-level and intermediate-level waste disposal, and transportation. For each representative facility the description includes: mainline process, effluent processing and waste management, facility and hardware description, safety-related information and potential alternative concepts for that fuel cycle element. The emphasis of the descriptive material is on safety-related information. This includes: operating and maintenance requirements, input/output of major materials, identification and inventories of hazardous materials (particularly radioactive materials), unit operations involved, potential accident driving forces, containment and shielding, and degree of hands-on operation

  14. Localized thin-section CT with radiomics feature extraction and machine learning to classify early-detected pulmonary nodules from lung cancer screening

    Science.gov (United States)

    Tu, Shu-Ju; Wang, Chih-Wei; Pan, Kuang-Tse; Wu, Yi-Cheng; Wu, Chen-Te

    2018-03-01

    Lung cancer screening aims to detect small pulmonary nodules and decrease the mortality rate of those affected. However, studies from large-scale clinical trials of lung cancer screening have shown that the false-positive rate is high and positive predictive value is low. To address these problems, a technical approach is greatly needed for accurate malignancy differentiation among these early-detected nodules. We studied the clinical feasibility of an additional protocol of localized thin-section CT for further assessment on recalled patients from lung cancer screening tests. Our approach of localized thin-section CT was integrated with radiomics features extraction and machine learning classification which was supervised by pathological diagnosis. Localized thin-section CT images of 122 nodules were retrospectively reviewed and 374 radiomics features were extracted. In this study, 48 nodules were benign and 74 malignant. There were nine patients with multiple nodules and four with synchronous multiple malignant nodules. Different machine learning classifiers with a stratified ten-fold cross-validation were used and repeated 100 times to evaluate classification accuracy. Of the image features extracted from the thin-section CT images, 238 (64%) were useful in differentiating between benign and malignant nodules. These useful features include CT density (p  =  0.002 518), sigma (p  =  0.002 781), uniformity (p  =  0.032 41), and entropy (p  =  0.006 685). The highest classification accuracy was 79% by the logistic classifier. The performance metrics of this logistic classification model was 0.80 for the positive predictive value, 0.36 for the false-positive rate, and 0.80 for the area under the receiver operating characteristic curve. Our approach of direct risk classification supervised by the pathological diagnosis with localized thin-section CT and radiomics feature extraction may support clinical physicians in determining

  15. Functional outcome of hip disarticulation and hemipelvectomy : a cross-sectional national descriptive study in the Netherlands

    NARCIS (Netherlands)

    Yari, Parwin; Dijkstra, Pieter U.; Geartzen, Jan H. B.; Geertzen, J.H.B.

    2008-01-01

    Objective: To describe characteristics of hip disarticulation and hemipelvectomy amputees, to assess their level of activities, participation and experienced limitations in mobility and to describe the amputation-related problems. Design: A cross-sectional study. Setting: Patients were mainly

  16. Stiffness Matrix of Thin-Walled Open Bar Subject to Bending, Bending Torsion and Shift of Cross Section Middle Surface

    Science.gov (United States)

    Panasenko, N. N.; Sinelschikov, A. V.

    2017-11-01

    One of the main stages in the analysis of complex 3D structures and engineering constructions made of thin-walled open bars using FEM is a stiffness matrix developing. Taking into account middle surface shear deformation caused by the work of tangential stresses in the formula to calculate a potential energy of thin-walled open bars, the authors obtain an important correction at calculation of the bar deformation and fundamental frequencies. The results of the analysis of the free end buckling of a cantilever H-bar under plane bending differ from exact solution by 0.53%. In the course of comparison of the obtained results with the cantilever bar buckling regardless the middle surface shear deformation, an increase made 16.6%. The stiffness matrix of a thin-walled open bar developed in the present work can be integrated into any software suite using FEM for the analysis of complex 3-D structures and engineering constructions with n-freedoms.

  17. Descriptive epidemiology and high risk behavior of male prescription opioid abusers: Cross-sectional study from Sikkim, North East India.

    Science.gov (United States)

    Datta, D; Pandey, S; Dutta, S; Verma, Y; Chakrabarti, Amit

    2015-01-01

    Sikkim is emerging as an important area for prescription opioid abuse with frequent news of seizures and arrests due to possession of prescription opioids. However, till date there is a little information on descriptive epidemiology and high risk behavior of prescription opioid abusers from Sikkim. The aim was to describe demographic (age, sex, religion, marital status, community, occupation, etc.); socioeconomic (income, education, family information etc.); and high risk behavior (e.g., injection sharing, visit to commercial sex workers [CSWs], homosexuality etc.) among treatment-seeking prescription opioid abusers in Sikkim. Epidemiological data were collected by administering predevised questionnaires from n = 223 prescription opioid abusers (main problem prescription opioids) reporting for treatment at five different drug abuse treatment centers across Sikkim. The mean age of prescription opioid abusers in Sikkim was 27 years; all were male, of Nepalese ethnicity and single/never married, school dropout and/or illiterate, earning unemployed youth. Trends of injection drug use, unsafe injection, high risk behavior have also been observed.

  18. Torsional Post-Buckling of a Simply Supported Thin-Walled Open-Section Beam Resting on a Two-Parameter Foundation

    Science.gov (United States)

    Rao, Ch. K.; Rao, L. B.

    2018-01-01

    The problem of the post-buckling response of a simply supported thin-walled beam subjected to an axial compressive load and supported by the Winkler-Pasternak foundation is studied in this paper. The strains are assumed to be small and elastic. The shear deformations and the in-plane cross-sectional deformations are assumed to be negligible. The post-buckling paths of the simply supported beam are determined for different values of the Winkler and Pasternak stiffness parameters. Bifurcation points are found.

  19. Thin-section CT in the examination of cervical disc herniation. A prospective study with 1-mm axial and helical images

    Energy Technology Data Exchange (ETDEWEB)

    Ilkko, E. [Dept. of Diagnostic Radiology, Oulu Univ. Central Hospital (Finland); Laehde, S. [Dept. of Diagnostic Radiology, Oulu Univ. Central Hospital (Finland); Heiskari, M. [Dept. of Neurosurgery, Oulu Univ. Central Hospital (Finland)

    1996-03-01

    The aim of the investigation was to determine whether thin-section high-resolution CT imaging could replace MR imaging and/or myelography in preoperative evaluation of radiculopathy and/or myelopathy. A total of 120 patients, referred for cervical myelography (n=107) or MR imaging (n=13), were further examined with 1-mm non-contrast CT of the suspected disc space, including at least the next cephalic and caudal interspaces. Thirty-seven patients underwent Cloward`s operation, at which 32 were found to have disc herniation. The sensitivities of CT (n=37), myelography (n=29), and MR imaging (n=8) were 66%, 84%, and 86%, respectively. The corresponding figures for false-positives were 8%, 10%, and 13%. Artefacts caused by wide shoulders in the 1-mm CT images were estimated to have contributed to a false-negative finding in 8 cases. The remaining 3 false-negatives were retrospectively considered evaluation errors. The true-positive CT findings usually presented with a local disc bulge measuring over 80 HU in density. Local ligamentous hypertropy presented an indistinguishable finding in 3 cases, yielding false-positive CT findings. Conventional thin-section CT is considered a usable alternative for the evaluation of suspected cervical disc herniations in selected patients. Stocky patients with wide shoulders and a short neck are not suitable candidates, even when new generation equipment is available. (orig.).

  20. Thin-section CT in the examination of cervical disc herniation. A prospective study with 1-mm axial and helical images

    International Nuclear Information System (INIS)

    Ilkko, E.; Laehde, S.; Heiskari, M.

    1996-01-01

    The aim of the investigation was to determine whether thin-section high-resolution CT imaging could replace MR imaging and/or myelography in preoperative evaluation of radiculopathy and/or myelopathy. A total of 120 patients, referred for cervical myelography (n=107) or MR imaging (n=13), were further examined with 1-mm non-contrast CT of the suspected disc space, including at least the next cephalic and caudal interspaces. Thirty-seven patients underwent Cloward's operation, at which 32 were found to have disc herniation. The sensitivities of CT (n=37), myelography (n=29), and MR imaging (n=8) were 66%, 84%, and 86%, respectively. The corresponding figures for false-positives were 8%, 10%, and 13%. Artefacts caused by wide shoulders in the 1-mm CT images were estimated to have contributed to a false-negative finding in 8 cases. The remaining 3 false-negatives were retrospectively considered evaluation errors. The true-positive CT findings usually presented with a local disc bulge measuring over 80 HU in density. Local ligamentous hypertropy presented an indistinguishable finding in 3 cases, yielding false-positive CT findings. Conventional thin-section CT is considered a usable alternative for the evaluation of suspected cervical disc herniations in selected patients. Stocky patients with wide shoulders and a short neck are not suitable candidates, even when new generation equipment is available. (orig.)

  1. Characterization of the adhesion of thin film by Cross-Sectional Nanoindentation. Analysis of the substrate edge chipping and the film delamination

    Science.gov (United States)

    Felder, Eric; Roy, Sébastien; Darque-Ceretti, Evelyne

    2011-07-01

    Cross-Sectional Nanoindentation (CSN) is a recent method for adhesion measurement of nanoscale thin films in Ultra-Large Scale Integrated circuits. In the case of ductile thin films, the motion of the substrate chip implies significant plastic deformation of the film and complex geometry of delaminated areas. This article recalls first the experimental procedure and the two main features observed in this test performed on various plane copper films deposited on silicon: the critical force producing silicon edge chipping increases linearly with the distance of the indenter to the interface; on the section the delaminated length of the film ( a-b) is proportional to the residual silicon chip displacement u and the ratio S=u/(a-b) depends on the manufacturing process of the film, and is so related to its adhesion to the substrate. One proposes a simple analysis of the silicon edge chipping. Then a model of pull-off of an elastic-strain hardening plastic film is developed, which suggests an explanation for the delamination process. Application of the model to experimental results starting from films plastic properties deduced from nanoindentation measurements provides plausible results. Some improvements for performing the CSN test are proposed in order to make easier its interpretation.

  2. Association between traditional oral hygiene methods with tooth wear, gingival bleeding, and recession: A descriptive cross-sectional study

    Directory of Open Access Journals (Sweden)

    Naseem Shah

    2018-01-01

    Full Text Available Background: Oral hygiene maintenance is crucial for prevention of various oral diseases. Oral hygiene practices across the country vary largely and people in peri-urban and rural areas use traditional methods of oral hygiene like powders, bark, oil and salt etc. Their effect on oral soft and hard tissues need to be studied to understand their beneficial and/ or harmful effects on maintenance of oral hygiene and prevention or causation of oral diseases. Objectives: This study aimed to assess the plaque-cleaning efficacy, gingival bleeding, recession and tooth wear with different traditional oral hygiene methods as compared to use of toothpaste-toothbrush, the most accepted method of oral hygiene practice. Study Design: Hospital based cross sectional analytical study. Results: Total 1062 traditional oral hygiene method users were compared with same number of toothpaste-brush users. The maximum number in the former group used tooth powder (76% as compared to other indigenous methods, such as use of bark of trees etc and out of tooth powder users; almost 75% reported using red toothpowder. The plaque scores and gingival bleeding & recession were found to be more in traditional oral hygiene method users. The toothwear was also more severe among the toothpowder users. Conclusions: Traditional methods were found to be inferior in plaque control as was documented by increased bleeding and gingival recession. Its effect on hard tissues of teeth was very damaging with higher tooth wear scores on all surfaces.

  3. Association between traditional oral hygiene methods with tooth wear, gingival bleeding, and recession: A descriptive cross-sectional study.

    Science.gov (United States)

    Shah, Naseem; Mathur, Vijay Prakash; Jain, Veena; Logani, Ajay

    2018-01-01

    Oral hygiene maintenance is crucial for prevention of various oral diseases. Oral hygiene practices across the country vary largely and people in peri-urban and rural areas use traditional methods of oral hygiene like powders, bark, oil and salt etc. Their effect on oral soft and hard tissues need to be studied to understand their beneficial and/ or harmful effects on maintenance of oral hygiene and prevention or causation of oral diseases. This study aimed to assess the plaque-cleaning efficacy, gingival bleeding, recession and tooth wear with different traditional oral hygiene methods as compared to use of toothpaste-toothbrush, the most accepted method of oral hygiene practice. Hospital based cross sectional analytical study. Results: Total 1062 traditional oral hygiene method users were compared with same number of toothpaste-brush users. The maximum number in the former group used tooth powder (76%) as compared to other indigenous methods, such as use of bark of trees etc and out of tooth powder users; almost 75% reported using red toothpowder. The plaque scores and gingival bleeding & recession were found to be more in traditional oral hygiene method users. The toothwear was also more severe among the toothpowder users. Traditional methods were found to be inferior in plaque control as was documented by increased bleeding and gingival recession. Its effect on hard tissues of teeth was very damaging with higher tooth wear scores on all surfaces.

  4. Relevance of Piaget's cognitive principles among 4-7 years old children: a descriptive cross-sectional study.

    Science.gov (United States)

    Asokan, Sharath; Surendran, Sharmila; Asokan, Sureetha; Nuvvula, Sivakumar

    2014-01-01

    According to Jean Piaget, children between 4 and 7 years of age are under the intuitive sub-stage of preoperational stage. Children possess specific characteristics based on their age. These characteristic cognitive principles have not been assessed in a dental setting. Research on the cognitive development of the child and its application to dental health care can enable pediatric dentists to better understand, approach and deliver improved quality of care to children. The purpose of this study is to assess the prevalence of Piaget's cognitive principles among preoperational children. This cross-sectional study was conducted among 200 children, aged 4-7 years. Various characteristics, specific for this age group, such as egocentrism, concept of cardinal numbers based on centration, lack of conservation, and reversibility were assessed, using three tangible experiments and two interview questions. A comparison of the prevalence of each character was carried out among the children based on their age. The prevalence of egocentrism based on the three mountain experiment was 65% and the personal interview showed a prevalence of 58%. Centration was appreciated in 83% of the study sample. The beaker experiment and the interview question revealed a lack of conservation in 89% and 59% of the children, respectively. There was a gradual and uniform reduction in the prevalence of the characters with an increase in age. All the three features assessed were observed in most of the children between 4 and 7 years of age as described by Piaget and most of his principles still appear valid today.

  5. Nepalese dental hygiene and dental students' career choice motivation and plans after graduation: a descriptive cross-sectional comparison.

    Science.gov (United States)

    Knevel, Ron J M; Gussy, Mark G; Farmer, Jane; Karimi, Leila

    2015-12-11

    This is the first study of its kind to provide data regarding the self-reported career choice motivation and intentions after graduation of dental and dental hygiene students in Nepal. The findings of this study can be used to inform future oral health workforce planning in Nepal. A cross-sectional survey of dentistry and dental hygiene students attending a large accredited dental college in Kathmandu, Nepal. Quantitative data were analysed using IBM® SPSS® 22. The respondents were given the opportunity to provide clarifying comments to some of the questions. Two hundred questionnaires were distributed, and 171 students completed the anonymous survey (response rate 86 %). Working in health care and serving the community were the most important initial motives for career choice, with significantly more dentistry students selecting their degree course because of the possibility to work flexible working hours (p students. A majority of the students expressed concern about finding a suitable job (58 %) after graduation. Almost a quarter (23 %) reported intent to seek a job immediately after graduation, while 46 % plan further studies. Dentistry students were more likely to report planning further studies (p = .007) compared to the dental hygiene students. Dental hygiene students express a higher interest in going abroad (p = .011) following graduation. Only 10 % of all students plan to live or work in rural areas after study. Most common preferred locations to live after graduation are urban (33 %) or abroad (38 %). Data suggest a preference to combine working in a hospital with working in their own practice (44 %) while interest in solely working in their own practice is low (students, though enthusiastic about their profession and expressing the ambition to serve the community, fear unemployment or envision better chances abroad. Most of the students in this study expressed a preference to live in an urban area after graduation. Findings indicate

  6. Is central obesity, hyperinsulinemia and dyslipidemia associated with high-grade prostate cancer? A descriptive cross-sectional study

    Directory of Open Access Journals (Sweden)

    Pawni Prabhat

    2010-01-01

    Full Text Available Aim : The association of central obesity, hyperinsulinemia, and dyslipidemia with higher grade advanced prostate cancer as determined by Gleason grading is not well understood. We evaluated the effect of central obesity waist hip ratio (WHR ≥ 0.9 and biochemical parameters associated with central obesity on Gleason grading in North Indian patients of prostate cancer presenting at advanced stages. Materials and Methods : A cross-sectional study was conducted among 50 nondiabetic patients having clinical stages III and IV prostate cancer. Gleason grading on core biopsy samples by histopathology was done and patients were divided in two groups-group1, Gleason score ≥8; group 2, Gleason score <8. WHR along with serum levels of prostate-specific antigen (PSA, testosterone, insulin, and lipid profile was done in each patient. Results : The two groups are similar in Age (67.54 years; range (50-80 years. Group 1 men had statistically higher mean WHR (0.96 vs 0.90; P ≤ 0.001, higher mean triglyceride level (201.34 vs 150.52 mg/dL; P=0.0006, higher mean very low-density lipoprotein (VLDL (40.27 vs 30.10 mg/dL; P =0.0006, higher mean insulin (19.49 vs 15.04 μIU/mL; P = 0.0024, and lower mean high-density lipoprotein (HDL levels (32.39 vs 36.82 mg/dL; P = 0.034 than men in group 2. Serum levels of cholesterol, LDL, and testosterone did not show statistically significant differences between the two groups. Conclusions : This pilot study involving small number of patients indicates that central obesity, dyslipidemia, and hyperinsulinemia could be associated with high-grade prostate cancer.

  7. Relevance of Piaget′s cognitive principles among 4-7 years old children: A descriptive cross-sectional study

    Directory of Open Access Journals (Sweden)

    Sharath Asokan

    2014-01-01

    Full Text Available Background: According to Jean Piaget, children between 4 and 7 years of age are under the intuitive sub-stage of preoperational stage. Children possess specific characteristics based on their age. These characteristic cognitive principles have not been assessed in a dental setting. Research on the cognitive development of the child and its application to dental health care can enable pediatric dentists to better understand, approach and deliver improved quality of care to children. Purpose: The purpose of this study is to assess the prevalence of Piaget′s cognitive principles among preoperational children. Materials and Methods: This cross-sectional study was conducted among 200 children, aged 4-7 years. Various characteristics, specific for this age group, such as egocentrism, concept of cardinal numbers based on centration, lack of conservation, and reversibility were assessed, using three tangible experiments and two interview questions. A comparison of the prevalence of each character was carried out among the children based on their age. Results: The prevalence of egocentrism based on the three mountain experiment was 65% and the personal interview showed a prevalence of 58%. Centration was appreciated in 83% of the study sample. The beaker experiment and the interview question revealed a lack of conservation in 89% and 59% of the children, respectively. There was a gradual and uniform reduction in the prevalence of the characters with an increase in age. Conclusion: All the three features assessed were observed in most of the children between 4 and 7 years of age as described by Piaget and most of his principles still appear valid today.

  8. Central Nervous System Idiopathic Inflammatory Demyelinating Disorders in South Americans: A Descriptive, Multicenter, Cross-Sectional Study.

    Science.gov (United States)

    Papais-Alvarenga, Regina Maria; Vasconcelos, Claudia Cristina Ferreira; Carra, Adriana; de Castillo, Ibis Soto; Florentin, Sara; Diaz de Bedoya, Fernando Hamuy; Mandler, Raul; de Siervi, Luiza Campanella; Pimentel, Maria Lúcia Vellutini; Alvarenga, Marina Papais; Alvarenga, Marcos Papais; Grzesiuk, Anderson Kuntz; Gama Pereira, Ana Beatriz Calmon; Gomes Neto, Antonio Pereira; Velasquez, Carolina; Soublette, Carlos; Fleitas, Cynthia Veronica; Diniz, Denise Sisteroli; Armas, Elizabeth; Batista, Elizabeth; Hernandez, Freda; Pereira, Fernanda Ferreira Chaves da Costa; Siqueira, Heloise Helena; Cabeça, Hideraldo; Sanchez, Jose; Brooks, Joseph Bruno Bidin; Gonçalves, Marcus Vinicius; Barroso, Maria Cristina Del Negro; Ravelo, Maria Elena; Castillo, Maria Carlota; Ferreira, Maria Lúcia Brito; Rocha, Maria Sheila Guimarães; Parolin, Monica Koncke Fiuza; Molina, Omaira; Marinho, Patricia Beatriz Christino; Christo, Paulo Pereira; Brant de Souza, Renata; Pessanha Neto, Silvio; Camargo, Solange Maria das Graças; Machado, Suzana Costa; Neri, Vanderson Carvalho; Fragoso, Yara Dadalti; Alvarenga, Helcio; Thuler, Luiz Claudio Santos

    2015-01-01

    The idiopathic inflammatory demyelinating disease (IIDD) spectrum has been investigated among different populations, and the results have indicated a low relative frequency of neuromyelitis optica (NMO) among multiple sclerosis (MS) cases in whites (1.2%-1.5%), increasing in Mestizos (8%) and Africans (15.4%-27.5%) living in areas of low MS prevalence. South America (SA) was colonized by Europeans from the Iberian Peninsula, and their miscegenation with natives and Africans slaves resulted in significant racial mixing. The current study analyzed the IIDD spectrum in SA after accounting for the ethnic heterogeneity of its population. A cross-sectional multicenter study was performed. Only individuals followed in 2011 with a confirmed diagnosis of IIDD using new diagnostic criteria were considered eligible. Patients' demographic, clinical and laboratory data were collected. In all, 1,917 individuals from 22 MS centers were included (73.7% female, 63.0% white, 28.0% African, 7.0% Mestizo, and 0.2% Asian). The main disease categories and their associated frequencies were MS (76.9%), NMO (11.8%), other NMO syndromes (6.5%), CIS (3.5%), ADEM (1.0%), and acute encephalopathy (0.4%). Females predominated in all main categories. The white ethnicity also predominated, except in NMO. Except in ADEM, the disease onset occurred between 20 and 39 years old, early onset in 8.2% of all cases, and late onset occurred in 8.9%. The long-term morbidity after a mean disease time of 9.28±7.7 years was characterized by mild disability in all categories except in NMO, which was scored as moderate. Disease time among those with MS was positively correlated with the expanded disability status scale (EDSS) score (r=0.374; p=<0.001). This correlation was not observed in people with NMO or those with other NMO spectrum disorders (NMOSDs). Among patients with NMO, 83.2% showed a relapsing-remitting course, and 16.8% showed a monophasic course. The NMO-IgG antibody tested using indirect

  9. Central Nervous System Idiopathic Inflammatory Demyelinating Disorders in South Americans: A Descriptive, Multicenter, Cross-Sectional Study.

    Directory of Open Access Journals (Sweden)

    Regina Maria Papais-Alvarenga

    Full Text Available The idiopathic inflammatory demyelinating disease (IIDD spectrum has been investigated among different populations, and the results have indicated a low relative frequency of neuromyelitis optica (NMO among multiple sclerosis (MS cases in whites (1.2%-1.5%, increasing in Mestizos (8% and Africans (15.4%-27.5% living in areas of low MS prevalence. South America (SA was colonized by Europeans from the Iberian Peninsula, and their miscegenation with natives and Africans slaves resulted in significant racial mixing. The current study analyzed the IIDD spectrum in SA after accounting for the ethnic heterogeneity of its population. A cross-sectional multicenter study was performed. Only individuals followed in 2011 with a confirmed diagnosis of IIDD using new diagnostic criteria were considered eligible. Patients' demographic, clinical and laboratory data were collected. In all, 1,917 individuals from 22 MS centers were included (73.7% female, 63.0% white, 28.0% African, 7.0% Mestizo, and 0.2% Asian. The main disease categories and their associated frequencies were MS (76.9%, NMO (11.8%, other NMO syndromes (6.5%, CIS (3.5%, ADEM (1.0%, and acute encephalopathy (0.4%. Females predominated in all main categories. The white ethnicity also predominated, except in NMO. Except in ADEM, the disease onset occurred between 20 and 39 years old, early onset in 8.2% of all cases, and late onset occurred in 8.9%. The long-term morbidity after a mean disease time of 9.28±7.7 years was characterized by mild disability in all categories except in NMO, which was scored as moderate. Disease time among those with MS was positively correlated with the expanded disability status scale (EDSS score (r=0.374; p=<0.001. This correlation was not observed in people with NMO or those with other NMO spectrum disorders (NMOSDs. Among patients with NMO, 83.2% showed a relapsing-remitting course, and 16.8% showed a monophasic course. The NMO-IgG antibody tested using indirect

  10. Parcels and Land Ownership, Parcels derived from legal descriptions and surveys. Tied to section monuments with coordinates derived from traditional survey and GPS., Published in 2013, 1:1200 (1in=100ft) scale, Portage County Government.

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — Parcels and Land Ownership dataset current as of 2013. Parcels derived from legal descriptions and surveys. Tied to section monuments with coordinates derived from...

  11. Cross-sectional descriptive study of topical self-medication in a hospital dermatology department in the state of São Paulo.

    Science.gov (United States)

    Padoveze, Emerson Henrique; Nascimento, Luiz Fernando Costa; Ferreira, Flávia Regina; Neves, Viviane Scarpa da Costa

    2012-01-01

    Self-medication involves individuals or their carers administering a medical drug of their own choice for symptomatic relief and in the hope of a "cure", without seeking professional medical advice.The aim of this descriptive cross-sectional study conducted at the Dermatology Department of the Taubaté University Hospital was to identify the occurrence of self-medication for the topical treatment of skin diseases in young people under 18, and to analyze the difficulties encountered in the clinical diagnosis of these individuals.We examined 29 cases of self-medication (from a total of 480 attendances). Although self-medication is a common practice in Brazil our study showed that users were not significantly harmed by it.

  12. Supervised Mineral Classification with Semi-automatic Training and Validation Set Generation in Scanning Electron Microscope Energy Dispersive Spectroscopy Images of Thin Sections

    DEFF Research Database (Denmark)

    Flesche, Harald; Nielsen, Allan Aasbjerg; Larsen, Rasmus

    2000-01-01

    This paper addresses the problem of classifying minerals common in siliciclastic and carbonate rocks. Twelve chemical elements are mapped from thin sections by energy dispersive spectroscopy in a scanning electron microscope (SEM). Extensions to traditional multivariate statistical methods...... are applied to perform the classification. First, training and validation sets are grown from one or a few seed points by a method that ensures spatial and spectral closeness of observations. Spectral closeness is obtained by excluding observations that have high Mahalanobis distances to the training class......–Matusita distance and the posterior probability of a class mean being classified as another class. Fourth, the actual classification is carried out based on four supervised classifiers all assuming multinormal distributions: simple quadratic, a contextual quadratic, and two hierarchical quadratic classifiers...

  13. Statistical test of reproducibility and operator variance in thin-section modal analysis of textures and phenocrysts in the Topopah Spring member, drill hole USW VH-2, Crater Flat, Nye County, Nevada

    Energy Technology Data Exchange (ETDEWEB)

    Moore, L.M.; Byers, F.M. Jr.; Broxton, D.E.

    1989-06-01

    A thin-section operator-variance test was given to the 2 junior authors, petrographers, by the senior author, a statistician, using 16 thin sections cut from core plugs drilled by the US Geological Survey from drill hole USW VH-2 standard (HCQ) drill core. The thin sections are samples of Topopah Spring devitrified rhyolite tuff from four textural zones, in ascending order: (1) lower nonlithophysal, (2) lower lithopysal, (3) middle nonlithophysal, and (4) upper lithophysal. Drill hole USW-VH-2 is near the center of the Crater Flat, about 6 miles WSW of the Yucca Mountain in Exploration Block. The original thin-section labels were opaqued out with removable enamel and renumbered with alpha-numeric labels. The sliders were then given to the petrographer operators for quantitative thin-section modal (point-count) analysis of cryptocrystalline, spherulitic, granophyric, and void textures, as well as phenocryst minerals. Between operator variance was tested by giving the two petrographers the same slide, and within-operator variance was tested by the same operator the same slide to count in a second test set, administered at least three months after the first set. Both operators were unaware that they were receiving the same slide to recount. 14 figs., 6 tabs.

  14. Initial limited three-level thin-section computed tomography scorings predict the prognosis of acute/subacute interstitial pneumonia in patients with dermatomyositis.

    Science.gov (United States)

    Kotani, Takuya; Takeuchi, Tohru; Yoshimatsu, Yuki; Ishida, Takaaki; Yamamoto, Naomune; Fujiki, Youhei; Oda, Katsuhiro; Isoda, Kentaro; Hata, Kenichiro; Kamimori, Takao; Fujiwara, Hiroshi; Makino, Shigeki; Hanafusa, Toshiaki

    2016-09-01

    We investigated the prediction of outcomes of patients with dermatomyositis with acute/subacute interstitial pneumonia (DM-A/SIP) on the basis of chest computed tomography (CT) images. In 20 patients with DM-A/SIP (13 survivors; seven deaths), the relationships between prognostic outcomes and chest high-resolution CT (HRCT) findings or limited three-level thin-section CT scoring on the first examination were retrospectively investigated. No significant difference was noted in chest HRCT findings between the survivor group and death group. The ground-glass opacity (GGO) scores of the right upper and middle lobes and left upper lobe, and the fibrosis score of the right middle lobe were significantly higher in the death group than in the survivor group (p = 0.01, 0.001, 0.02, and 0.02, respectively). The influence of the GGO score of the right middle lobe on death from IP was the strongest among the items examined, and it was independently significant (p = 0.01). A right middle lobe GGO score of ≥3 (GGO ≥ 25% of the lobe) was determined to be the best cut-off value for a poor prognosis (sensitivity: 85.7%, specificity: 85.7%), and the survival rate after 24 weeks was significantly lower in patients with a right middle lobe GGO score of ≥3 (survival rate: 0.0%) than in those with a score of< 3 (92.9%) (p < 0.0001). The prognosis of patients with DM-A/SIP was poor when the range of right middle lobe GGO was 25% or higher on limited three-level thin-section CT.

  15. Rust Contamination from Water Leaks in the Cosmic Dust Lab and Lunar and Meteorite Thin Sections Labs at Johnson Space Center

    Science.gov (United States)

    Kent, J. J.; Berger, E. L.; Fries, M. D.; Bastien, R.; McCubbin, F. M.; Pace, L.; Righter, K.; Sutter, B.; Zeigler, R. A.; Zolensky, M.

    2017-01-01

    On the early morning of September 15th, 2016, on the first floor of Building 31 at NASA-Johnson Space Center, the hose from a water chiller ruptured and began spraying water onto the floor. The water had been circulating though old metal pipes, and the leaked water contained rust-colored particulates. The water flooded much of the western wing of the building's ground floor before the leak was stopped, and it left behind a residue of rust across the floor, most notably in the Apollo and Meteorite Thin Section Labs and Sample Preparation Lab. No samples were damaged in the event, and the affected facilities are in the process of remediation. At the beginning of 2016, a separate leak occurred in the Cosmic Dust Lab, located in the same building. In that lab, a water leak occurred at the bottom of the sink used to clean the lab's tools and containers with ultra-pure water. Over years of use, the ultra-pure water eroded the metal sink piping and leaked water onto the inside of the lab's flow bench. This water also left behind a film of rusty material. The material was cleaned up and the metal piping was replaced with PVC pipe and sealed with Teflon plumber's tape. Samples of the rust detritus were collected from both incidents. These samples were imaged and analyzed to determine their chemical and mineralogical compositions. The purpose of these analyses is to document the nature of the detritus for future reference in the unlikely event that these materials occur as contaminants in the Cosmic Dust samples or Apollo or Meteorite thin sections.

  16. The Strength of Thin-wall Cylinders of D Cross Section in Combined Pure Bending and Torsion

    Science.gov (United States)

    Sherwood, A W

    1943-01-01

    The results of tests of 56 cylinders of D cross section conducted in the Aeronautical Laboratory of the University of Maryland are presented in this report. These cylinders were subjected to pure bending and torsional moments of varying proportions to give the strength under combined loading conditions. The average buckling stress of these cylinders has been related to that of circumscribing circular cylinders for conditions of pure torsion and pure bending and the equation of the interaction curve has been determined for conditions of combined loading.

  17. The Protocol Of KFM Characterization On Cross-section Of CdS/CdTe Thin Film Solar Cell

    International Nuclear Information System (INIS)

    You, L.; Chevalier, N.; Bernardi, S.; Martinez, E.; Mariolle, D.; Feuillet, G.; Chabli, A.; Bertin, F.; Kogelschatz, M.; Bremond, G.

    2011-01-01

    In this work, we report a series of Kelvin Force Microscopy (KFM) measurements, suitable to observe the topography and the contact potential difference (CPD) distribution of the following stack: CdTe/CdS/ITO/glass. The sample is prepared by mechanical polishing after cleavage to decrease the roughness. In order to have a better understanding of the charge transport inside the solar cell and to vary the Fermi level pinning effect, different bias are applied to the sample. The CPD variations with different bias on cross-section in dark condition are presented. We observe the reverse bias widens the CdTe/CdS depletion region. Under illumination, electron and holes are generated near the interface and varies the CPD distribution. Additionally, the chemical composition of each layer has been investigated by nano-Auger electron spectroscopy (AES). We observe the interdiffusion at the CdTe/CdS interface and determine the composition of the active layers to be CdTe/CdS 0.7 Te 0.3 .

  18. Cathodoluminescence and Cross-sectional Transmission Electron Microscopy Studies for Deformation Behaviors of GaN Thin Films Under Berkovich Nanoindentation

    Directory of Open Access Journals (Sweden)

    Teng I-Ju

    2008-01-01

    Full Text Available AbstractIn this study, details of Berkovich nanoindentation-induced mechanical deformation mechanisms of metal-organic chemical-vapor deposition-derived GaN thin films have been systematic investigated with the aid of the cathodoluminescence (CL and the cross-sectional transmission electron microscopy (XTEM techniques. The multiple “pop-in” events were observed in the load-displacement (P–h curve and appeared to occur randomly by increasing the indentation load. These instabilities are attributed to the dislocation nucleation and propagation. The CL images of nanoindentation show very well-defined rosette structures with the hexagonal system and, clearly display the distribution of deformation-induced extended defects/dislocations which affect CL emission. By using focused ion beam milling to accurately position the cross-section of an indented area, XTEM results demonstrate that the major plastic deformation is taking place through the propagation of dislocations. The present observations are in support to the massive dislocations activities occurring underneath the indenter during the loading cycle. No evidence of either phase transformation or formation of micro-cracking was observed by means of scanning electron microscopy and XTEM observations. We also discuss how these features correlate with Berkovich nanoindentation produced defects/dislocations structures.

  19. Label-free identification and characterization of murine hair follicle stem cells located in thin tissue sections with Raman micro-spectroscopy.

    Science.gov (United States)

    Tsai, Tsung-Hua; Short, Michael A; McLean, David I; Zeng, Haishan; McElwee, Kevin; Lui, Harvey

    2014-06-07

    Stem cells offer tremendous opportunities for regenerative medicine. Over the past decade considerable research has taken place to identify and characterize the differentiation states of stem cells in culture. Raman micro-spectroscopy has emerged as an ideal technology since it is fast, nondestructive, and does not require potentially toxic dyes. Raman spectroscopy systems can also be incorporated into confocal microscope imaging systems allowing spectra to be obtained from below the tissue surface. Thus there is significant potential for monitoring stem cells in living tissue. Stem cells that reside in hair follicles are suitable for testing this possibility since they are close to the skin surface, and typically clustered around the bulge area. One of the first steps needed would be to obtain Raman micro-spectra from stem cells located in thin sections of tissue, and then see whether these spectra are clearly different from those of the surrounding differentiated cells. To facilitate this test, standard 5 μm thick sections of murine skin tissue were stained to identify the location of hair follicle stem cells and their progeny. Raman spectra were then obtained from adjacent cells in a subsequent unstained 10 μm thick section. The spectra revealed significant differences in peak intensities associated with nucleic acids, proteins, lipids and amino acids. Statistical analyses of the Raman micro-spectra identified stem cells with 98% sensitivity and 94% specificity, as compared with a CD34 immunostaining gold standard. Furthermore analyses of the spectral variance indicated differences in cellular dynamics between the two cell groups. This study shows that Raman micro-spectroscopy has a potential role in identifying adult follicle stem cells, laying the groundwork for future applications of hair follicle stem cells and other somatic stem cells in situ.

  20. Vitamin D status in patients with musculoskeletal pain, fatigue and headache: a cross-sectional descriptive study in a multi-ethnic general practice in Norway.

    Science.gov (United States)

    Knutsen, Kirsten Valebjørg; Brekke, Mette; Gjelstad, Svein; Lagerløv, Per

    2010-09-01

    To investigate vitamin D levels in patients with non-specific musculoskeletal pain, headache, and fatigue. A cross-sectional descriptive study. A health center in Oslo, Norway, with a multi-ethnic population. A total of 572 patients referred by a general practitioner (GP) for an examination of hypovitaminosis D who reported musculoskeletal pain, headache, or fatigue. The patients' native countries were: Norway (n = 249), Europe, America, and South-East Asia (n = 83), and the Middle East, Africa, and South Asia (n = 240). Both genders and all ages were included. Vitamin D levels (25-hydroxyvitamin D) in nmol/L. Hypovitaminosis D (25-hydroxyvitamin D prevalence of hypovitaminosis D in patients with non-specific musculoskeletal pain, headache, or fatigue for whom the GP had suspected a low vitamin D level. Hypovitaminosis D was not restricted to immigrant patients. These results indicate that GPs should maintain awareness of hypovitaminosis D and refer patients who report headaches, fatigue, and musculoskeletal pain with minimal sun exposure and a low dietary vitamin D intake for assessment.

  1. Factors associated with anxiety and depression among type 2 diabetes outpatients in Malaysia: a descriptive cross-sectional single-centre study.

    Science.gov (United States)

    Ganasegeran, Kurubaran; Renganathan, Pukunan; Manaf, Rizal Abdul; Al-Dubai, Sami Abdo Radman

    2014-04-23

    To determine the prevalence and factors associated with anxiety and depression among type 2 diabetes outpatients in Malaysia. Descriptive, cross-sectional single-centre study with universal sampling of all patients with type 2 diabetes. Endocrinology clinic of medical outpatient department in a Malaysian public hospital. All 169 patients with type 2 diabetes (men, n=99; women, n=70) aged between 18 and 90 years who acquired follow-up treatment from the endocrinology clinic in the month of September 2013. The validated Hospital Anxiety and Depression Scale (HADS), sociodemographic characteristics and clinical health information from patient records. Of the total 169 patients surveyed, anxiety and depression were found in 53 (31.4%) and 68 (40.3%), respectively. In multivariate analysis, age, ethnicity and ischaemic heart disease were significantly associated with anxiety, while age, ethnicity and monthly household income were significantly associated with depression. Sociodemographics and clinical health factors were important correlates of anxiety and depression among patients with diabetes. Integrated psychological and medical care to boost self-determination and confidence in the management of diabetes would catalyse optimal health outcomes among patients with diabetes.

  2. Thin-section CT of lung without ECG gating: 64-detector row CT can markedly reduce cardiac motion artifact which can simulate lung lesions

    Energy Technology Data Exchange (ETDEWEB)

    Yanagawa, Masahiro [Department of Radiology, Osaka University Graduate School of Medicine, 2-2 Yamadaoka, Suita-city, Osaka 565-0871 (Japan)], E-mail: m-yanagawa@radiol.med.osaka-u.ac.jp; Tomiyama, Noriyuki; Sumikawa, Hiromitsu; Inoue, Atsuo [Department of Radiology, Osaka University Graduate School of Medicine, 2-2 Yamadaoka, Suita-city, Osaka 565-0871 (Japan); Daimon, Tadahisa [Department of Radiology, Osaka University Graduate School of Medicine, 2-2 Yamadaoka, Suita-city, Osaka 565-0871 (Japan); Department of Medicine, Division of Pulmonary Medicine, Jichi Medical University, 3311-1 Yakushiji, Shimotsuke, Tochigi 329-0498 (Japan); Honda, Osamu [Department of Radiology, Osaka University Graduate School of Medicine, 2-2 Yamadaoka, Suita-city, Osaka 565-0871 (Japan); Mihara, Naoki [Department of Radiology, Osaka University Graduate School of Medicine, 2-2 Yamadaoka, Suita-city, Osaka 565-0871 (Japan); Department of Radiology, Osaka Advanced Medical Imaging Center, 5-20-1 Momoyamadai, Suita-city, Osaka 565-0854 (Japan); Johkoh, Takeshi [Department of Radiology, Osaka University Graduate School of Medicine, 2-2 Yamadaoka, Suita-city, Osaka 565-0871 (Japan); Department of Medical Physics, Osaka University Graduate School of Medicine, Osaka University Graduate School of Medicine, 2-2 Yamadaoka, Suita-city, Osaka 565-0871 (Japan); Nakamura, Hironobu [Department of Radiology, Osaka University Graduate School of Medicine, 2-2 Yamadaoka, Suita-city, Osaka 565-0871 (Japan)

    2009-01-15

    Purpose: Motion artifacts, which can mimic thickened bronchial wall and the cystic appearance of bronchiectasis, constitute a potential pitfall in the diagnosis of interstitial or bronchial disease. Therefore, purpose of our study was to evaluate whether 64-detector row CT (64-MDCT) enables a reduction in respiratory or cardiac motion artifacts in the lung area on thin-section CT without ECG gating, and to examine the correlation between cardiac motion artifact and heart rate. Materials and methods: Thirty-two patients with suspected diffuse lung disease, who underwent both 8- and 64-MDCT (gantry rotation time, 0.5 and 0.4 s, respectively), were included. The heart rates of an additional 155 patients were measured (range, 48-126 beats per minute; mean, 76 beats per minute) immediately prior to 64-MDCT, and compared to the degree of cardiac motion artifact. Two independent observers evaluated the following artifacts on a monitor without the knowledge of relevant clinical information: (1) artifacts on 8- and 64-MDCT images with 1.25-mm thickness and those on 64-MDCT images with 0.625-mm thickness in 32 patients; and (2) artifacts on 64-MDCT images with 0.625-mm thickness in 155 patients. Results: Interobserver agreement was good in evaluating artifacts on 8-MDCT images with 1.25-mm thickness (weighted Kappa test, {kappa} = 0.61-0.71), and fair or poor in the other evaluations ({kappa} < 0.31). Two observers stated that cardiac motion artifacts were more significant on 8-MDCT than on 64-MDCT in all 32 patients. Statistically significant differences were found at various checkpoints only in comparing artifacts between 8- and 64-MDCT for 1.25-mm thickness (Wilcoxon's signed-rank test, p < 0.0017). Cardiac motion artifacts on 64-MDCT had no significant correlation with heart rate (Spearman's correlation coefficient by rank test). Conclusion: The high temporal resolution of 64-MDCT appears to reduce cardiac motion artifact that can affect thin-section scans of

  3. Physical Functioning, Physical Activity, Exercise Self-Efficacy, and Quality of Life Among Individuals With Chronic Heart Failure in Korea: A Cross-Sectional Descriptive Study.

    Science.gov (United States)

    Lee, Haejung; Boo, Sunjoo; Yu, Jihyoung; Suh, Soon-Rim; Chun, Kook Jin; Kim, Jong Hyun

    2017-04-01

    Both the beneficial relationship between exercise and quality of life and the important role played by exercise self-efficacy in maintaining an exercise regimen among individuals with chronic heart failure are well known. However, most nursing interventions for Korean patients with chronic heart failure focus only on providing education related to risk factors and symptoms. Little information is available regarding the influence of physical functions, physical activity, and exercise self-efficacy on quality of life. This study was conducted to examine the impact of physical functioning, physical activity, and exercise self-efficacy on quality of life among individuals with chronic heart failure. This study used a cross-sectional descriptive design. Data were collected from 116 outpatients with chronic heart failure in Korea. Left ventricular ejection fraction and New York Heart Association classifications were chart reviewed. Information pertaining to levels of physical activity, exercise self-efficacy, and quality of life were collected using self-administered questionnaires. Data were analyzed using descriptive statistics, t tests, analyses of variance, correlations, and hierarchical multiple regressions. About 60% of participants were physically inactive, and most showed relatively low exercise self-efficacy. The mean quality-of-life score was 80.09. The significant correlates for quality of life were poverty, functional status, physical inactivity, and exercise self-efficacy. Collectively, these four variables accounted for 50% of the observed total variance in quality of life. Approaches that focus on enhancing exercise self-efficacy may improve patient-centered outcomes in those with chronic heart failure. In light of the low level of exercise self-efficacy reported and the demonstrated ability of this factor to predict quality of life, the development of effective strategies to enhance exercise self-efficacy offers a novel and effective approach to improving

  4. The provision of family-centred intensive care bereavement support in Australia and New Zealand: Results of a cross sectional explorative descriptive survey.

    Science.gov (United States)

    Mitchell, Marion; Coombs, Maureen; Wetzig, Krista

    2017-05-01

    Caring for the bereaved is an intrinsic part of intensive care practice with family bereavement support an important aspect of the nursing role at end of life. However, reporting on provision of intensive care family bereavement support at a national level has not been well reported since an Australian paper published ten years ago. The objective was to investigate provision of family bereavement support in intensive care units (ICU) across New Zealand (NZ) and Australia. A cross-sectional exploratory descriptive web-based survey was used. All ICUs [public/private, neonatal/pediatrics/adults] were included. The survey was distributed to one nursing leader from each identified ICU (n=229; 188 in Australia, 41 in NZ). Internal validity of the survey was established through piloting. Descriptive statistics were used to analyse the data. Ethical approval was received by the ethics committees of two universities. One-hundred and fifty-three (67%) responses were received from across New Zealand and Australia with 69.3% of respondents from the public sector. Whilst respondents reported common bereavement practices to include debriefing for staff after a traumatic death (87.9%), there was greater variation in sending a sympathy card to families (NZ 54.2%, Australia 20.8%). Fifty percent of responding New Zealand units had a bereavement follow-up service compared to 28.3% of Australian unit respondents. Of those with follow-up services, 92.3% of New Zealand units undertook follow-up calls to families compared to 76.5% of Australian units. Bereavement follow-up services were mainly managed by social workers in Australia and nursing staff in New Zealand. This is the first Australia and New Zealand-wide survey on ICU bereavement support services. Whilst key components of family bereavement support remain consistent over the past decade, there were fewer bereavement follow-up services in responding Australian ICUs in 2015. As a quality improvement initiative, support for this

  5. Drug-sensitive tuberculosis, multidrug-resistant tuberculosis, and nontuberculous mycobacterial pulmonary disease in nonAIDS adults: comparisons of thin-section CT findings

    International Nuclear Information System (INIS)

    Chung, Myung Jin; Lee, Kyung Soo; Kim, Tae Sung; Kim, Sung Mok; Koh, Won-Jung; Kwon, O Jung; Kang, Eun Young; Kim, Seonwoo

    2006-01-01

    The aim of this work was to compare thin-section CT (TSCT) findings of drug-sensitive (DS) tuberculosis (TB), multidrug-resistant (MDR) TB, and nontuberculous mycobacterial (NTM) pulmonary disease in nonAIDS adults. During 2003, 216 (113 DS TB, 35 MDR TB, and 68 NTM) patients with smear-positive sputum for acid-fast bacilli (AFB), and who were subsequently confirmed to have mycobacterial pulmonary disease, underwent thoracic TSCT. The frequency of lung lesion patterns on TSCT and patients' demographic data were compared. The commonest TSCT findings were tree-in-bud opacities and nodules. On a per-person basis, significant differences were found in the frequency of multiple cavities and bronchiectasis (P<0.001, chi-square test and multiple logistic regression analysis). Multiple cavities were more frequent in MDR TB than in the other two groups and extensive bronchiectasis in NTM disease (multiple logistic regression analysis). Patients with MDR TB were younger than those with DS TB or NTM disease (P<0.001, multiple logistic regression analysis). Previous tuberculosis treatment history was significantly more frequent in patients with MDR TB or NTM disease (P<0.001, chi-square test and multiple logistic regression analysis). In patients with positive sputum AFB, multiple cavities, young age, and previous tuberculosis treatment history imply MDR TB, whereas extensive bronchiectasis, old age, and previous tuberculosis treatment history NTM disease. (orig.)

  6. Localized-low attenuation of the lung on thin-section CT in experimentally induced pulmonary arterial occlusion with balloon catheter in pigs

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Hyun Ju; Goo, Jin Mo; Im, Jung Gi [Seoul National Univresity College of Medicine, Seoul (Korea, Republic of); Kim, Ji Hye [Sungkyunkwan University School of Medicine, Seoul (Korea, Republic of)

    2008-03-15

    To determine whether a localized low-attenuation (LLA) is induced on a thin-section CT (TSCT) during an acute pulmonary arterial occlusion in pigs. In eight pigs, 14 sites of the descending pulmonary artery were obstructed using balloon catheters. The lung TSCTs were obtained immediately after pulmonary artery obstruction (n=13), 10 min (n=10), 30 min (n=14) and 60 min (n=14) after pulmonary artery obstruction at the end of expiration. The TSCTs were also obtained after balloon-deflation at the end of expiration (n=11) and with the balloon-reinflation at inspiration (n=6). Of the 14 sites of pulmonary artery obstruction, 11 (79%) showed LLA. However, LLA progressively became fainter or disappeared on a follow-up CT in seven sites. When the balloon was deflated, 10 of the 11 sites measured showed no change in lung attenuation. After full inspiration, LLA disappeared in three of the six sites. The corresponding areas of LLA on the CT showed a statistically significant increase compared to the baseline CT immediately after inflation ({rho} =0.021) and 30 minutes after inflation ({rho} = 0.041), and after balloon deflation ({rho} = 0.036). LLA was induced by acute pulmonary artery obstruction. However, LLA, gradually faded over the 60 minutes following obstruction. LLAs were maintained despite the restoration of pulmonary arterial flow, but disappeared as a result of a full inspiration. Thus, LLA might be caused by air trapping.

  7. Short linear shadows connecting pulmonary segmental arteries to oblique fissures in volumetric thin-section CT images: comparing CT, micro-CT and histopathology

    International Nuclear Information System (INIS)

    Guan, Chun-Shuang; Ma, Da-Qing; Chen, Jiang-Hong; Chen, Bu-Dong; Cui, Dun; Zhang, Yan-Song; Liu, Wei-Hua

    2016-01-01

    To retrospectively evaluate short linear shadows connecting pulmonary segmental arteries to oblique fissures in thin-section CT images and determine their anatomical basis. CT scanning was performed on 108 patients and 11 lung specimens with no lung diseases around the oblique fissures or hilar. Two radiologists evaluated the imaging. The parameters included length, thickness of short linear shadows, pulmonary segmental artery variations, and traction interlobar fissures, etc. The short linear shadows were not related to sex, age, or smoking history. The lengths of the short linear shadows were generally within 10 mm. The thicknesses of the short linear shadows ranged from 1 to 2 mm. Of the patients, 26.9 % showed pulmonary segmental artery variations; 66.7 % of short linear shadows pulled oblique fissures. In three-dimensional images, the short linear shadows appeared as arc planes, with one side edge connected to the oblique fissure, one side edge connected to a pulmonary segmental artery. On the tissue slices, the short linear shadow exhibited a band structure composed of connective tissues, small blood vessels, and small lymphatic vessels. Short linear shadows are a type of normal intrapulmonary membranes and can maintain the integrity of the oblique fissures and hilar structure. (orig.)

  8. Investigation of Mild Steel Thin-Wall Tubes in Unfilled and Foam-Filled Triangle, Square, and Hexagonal Cross Sections Under Compression Load

    Science.gov (United States)

    Rajak, Dipen Kumar; Kumaraswamidhas, L. A.; Das, S.

    2018-02-01

    This study has examined proposed structures with mild steel-reinforced LM30 aluminum (Al) alloy having diversely unfilled and 10 wt.% SiCp composite foam-filled tubes for improving axial compression performance. This class of material has novel physical, mechanical, and electrical properties along with low density. In the present experiment, Al alloy foams were prepared by the melt route technique using metal hydride powder as a foaming agent. Crash energy phenomena for diverse unfilled and foam-filled in mild steel thin-wall tubes (triangular, square and hexagonal) were studied as well. Compression deformation investigation was conducted at strain rates of 0.001-0.1/s for evaluating specific energy absorption (SEA) under axial loading conditions. The results were examined to measure plateau stress, maximum densification strain, and deformation mechanism of the materials. Specific energy absorption and total energy absorption capacities of the unfilled and filled sections were determined from the compressive stress-strain curves, which were then compared with each other.

  9. Characteristics of pulmonary cysts in Birt-Hogg-Dube syndrome: Thin-section CT findings of the chest in 12 patients

    Energy Technology Data Exchange (ETDEWEB)

    Tobino, Kazunori, E-mail: tobino@juntendo.ac.jp [Department of Respiratory Medicine, Juntendo University, School of Medicine, 2-1-1 Hongo, Bunkyo-Ku, Tokyo 113-8421 (Japan); Gunji, Yoko [Department of Respiratory Medicine, Juntendo University, School of Medicine, 2-1-1 Hongo, Bunkyo-Ku, Tokyo 113-8421 (Japan); Kurihara, Masatoshi [Pneumothorax Center, Nissan Tamagawa Hospital, 4-8-1 Seta, Setagaya-Ku, Tokyo 158-0095 (Japan); The Study Group of Pneumothorax and Cystic Lung Diseases, 4-8-1 Seta, Setagaya-Ku, Tokyo 158-0095 (Japan); Kunogi, Makiko; Koike, Kengo [Department of Respiratory Medicine, Juntendo University, School of Medicine, 2-1-1 Hongo, Bunkyo-Ku, Tokyo 113-8421 (Japan); Tomiyama, Noriyuki [Department of Radiology, Osaka University Graduate School of Medicine, 2-2 Yamadaoka, Suita, Osaka 565-0871 (Japan); Johkoh, Takeshi [Department of Radiology, Kinki Central Hospital of Mutual Aid Association of Public School Teachers, Kurumazuka 3-1, Itami, Hyogo 664-0872 (Japan); Kodama, Yuzo [Department of Respiratory Medicine, Juntendo University, School of Medicine, 2-1-1 Hongo, Bunkyo-Ku, Tokyo 113-8421 (Japan); Iwakami, Shin-ichiro [Department of Respiratory Medicine, Juntendo University, Shizuoka Hospital, 1129 Nagaoka, Izunokuni, Shizuoka 410-2295 (Japan); Kikkawa, Mika [Biochemical Research Center, Division of Proteomics and Biomolecular Sciences, Juntendo University, Graduate School of Medicine, Bunkyo-Ku, Tokyo (Japan); Takahashi, Kazuhisa [Department of Respiratory Medicine, Juntendo University, School of Medicine, 2-1-1 Hongo, Bunkyo-Ku, Tokyo 113-8421 (Japan); Seyama, Kuniaki [Department of Respiratory Medicine, Juntendo University, School of Medicine, 2-1-1 Hongo, Bunkyo-Ku, Tokyo 113-8421 (Japan); Study Group of Pneumothorax and Cystic Lung Diseases, 4-8-1 Seta, Setagaya-Ku, Tokyo 158-0095 (Japan)

    2011-03-15

    Purpose: To describe in detail the characteristic chest computed tomography (CT) findings of Birt-Hogg-Dube (BHD) syndrome. Materials and methods: Thin-section chest CT scans of consecutive 12 patients with genetically diagnosed BHD syndrome were retrospectively evaluated by two observers, especially about the characteristics (distribution, number, size, shape and relation to pleura) of pulmonary cysts. Interobserver agreement in the identification of abnormalities on the CT images was achieved using the {kappa} statistic, and the degree of interobserver correlation for the characterization of pulmonary cysts was assessed using the Spearman rank correlation coefficient. Results: Multiple pulmonary cysts were seen in all patients. The number of cysts in each patient was various (range, 29-407), and cysts of various sizes (from a few mm to 2 cm or more) were seen in all patient. 76.6% (mean) of cysts were irregular-shaped, and 40.5% (mean) of cysts were located along the pleura. The mean extent score of cysts was 13% of the whole lung, and the distribution of cysts was predominantly in the lower medial zone. Finally, cysts abutting or including the proximal portions of lower pulmonary arteries or veins were also seen in all patients. Conclusion: Multiple, irregular-shaped cysts of various sizes with lower medial lung zone predominance are characteristic CT findings of BHD syndrome. Cysts abutting or including the proximal portions of lower pulmonary arteries or veins may also exist in this syndrome in a high probability.

  10. Automated Liquid Microjunction Surface Sampling-HPLC-MS/MS Analysis of Drugs and Metabolites in Whole-Body Thin Tissue Sections

    Energy Technology Data Exchange (ETDEWEB)

    Kertesz, Vilmos [ORNL; Van Berkel, Gary J [ORNL

    2013-01-01

    A fully automated liquid extraction-based surface sampling system utilizing a commercially available autosampler coupled to high performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) detection is reported. Discrete spots selected for droplet-based sampling and automated sample queue generation for both the autosampler and MS were enabled by using in-house developed software. In addition, co-registration of spatially resolved sampling position and HPLC-MS information to generate heatmaps of compounds monitored for subsequent data analysis was also available in the software. The system was evaluated with whole-body thin tissue sections from propranolol dosed rat. The hands-free operation of the system was demonstrated by creating heatmaps of the parent drug and its hydroxypropranolol glucuronide metabolites with 1 mm resolution in the areas of interest. The sample throughput was approximately 5 min/sample defined by the time needed for chromatographic separation. The spatial distributions of both the drug and its metabolites were consistent with previous studies employing other liquid extraction-based surface sampling methodologies.

  11. Characteristics of pulmonary cysts in Birt-Hogg-Dube syndrome: Thin-section CT findings of the chest in 12 patients

    International Nuclear Information System (INIS)

    Tobino, Kazunori; Gunji, Yoko; Kurihara, Masatoshi; Kunogi, Makiko; Koike, Kengo; Tomiyama, Noriyuki; Johkoh, Takeshi; Kodama, Yuzo; Iwakami, Shin-ichiro; Kikkawa, Mika; Takahashi, Kazuhisa; Seyama, Kuniaki

    2011-01-01

    Purpose: To describe in detail the characteristic chest computed tomography (CT) findings of Birt-Hogg-Dube (BHD) syndrome. Materials and methods: Thin-section chest CT scans of consecutive 12 patients with genetically diagnosed BHD syndrome were retrospectively evaluated by two observers, especially about the characteristics (distribution, number, size, shape and relation to pleura) of pulmonary cysts. Interobserver agreement in the identification of abnormalities on the CT images was achieved using the κ statistic, and the degree of interobserver correlation for the characterization of pulmonary cysts was assessed using the Spearman rank correlation coefficient. Results: Multiple pulmonary cysts were seen in all patients. The number of cysts in each patient was various (range, 29-407), and cysts of various sizes (from a few mm to 2 cm or more) were seen in all patient. 76.6% (mean) of cysts were irregular-shaped, and 40.5% (mean) of cysts were located along the pleura. The mean extent score of cysts was 13% of the whole lung, and the distribution of cysts was predominantly in the lower medial zone. Finally, cysts abutting or including the proximal portions of lower pulmonary arteries or veins were also seen in all patients. Conclusion: Multiple, irregular-shaped cysts of various sizes with lower medial lung zone predominance are characteristic CT findings of BHD syndrome. Cysts abutting or including the proximal portions of lower pulmonary arteries or veins may also exist in this syndrome in a high probability.

  12. Localized-low attenuation of the lung on thin-section CT in experimentally induced pulmonary arterial occlusion with balloon catheter in pigs

    International Nuclear Information System (INIS)

    Lee, Hyun Ju; Goo, Jin Mo; Im, Jung Gi; Kim, Ji Hye

    2008-01-01

    To determine whether a localized low-attenuation (LLA) is induced on a thin-section CT (TSCT) during an acute pulmonary arterial occlusion in pigs. In eight pigs, 14 sites of the descending pulmonary artery were obstructed using balloon catheters. The lung TSCTs were obtained immediately after pulmonary artery obstruction (n=13), 10 min (n=10), 30 min (n=14) and 60 min (n=14) after pulmonary artery obstruction at the end of expiration. The TSCTs were also obtained after balloon-deflation at the end of expiration (n=11) and with the balloon-reinflation at inspiration (n=6). Of the 14 sites of pulmonary artery obstruction, 11 (79%) showed LLA. However, LLA progressively became fainter or disappeared on a follow-up CT in seven sites. When the balloon was deflated, 10 of the 11 sites measured showed no change in lung attenuation. After full inspiration, LLA disappeared in three of the six sites. The corresponding areas of LLA on the CT showed a statistically significant increase compared to the baseline CT immediately after inflation (ρ =0.021) and 30 minutes after inflation (ρ = 0.041), and after balloon deflation (ρ = 0.036). LLA was induced by acute pulmonary artery obstruction. However, LLA, gradually faded over the 60 minutes following obstruction. LLAs were maintained despite the restoration of pulmonary arterial flow, but disappeared as a result of a full inspiration. Thus, LLA might be caused by air trapping

  13. Drug-sensitive tuberculosis, multidrug-resistant tuberculosis, and nontuberculous mycobacterial pulmonary disease in nonAIDS adults: comparisons of thin-section CT findings

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Myung Jin; Lee, Kyung Soo; Kim, Tae Sung; Kim, Sung Mok [Sungkyunkwan University School of Medicine, Department of Radiology and Center for Imaging Science, Samsung Medical Center, Seoul (Korea); Koh, Won-Jung; Kwon, O Jung [Sungkyunkwan University School of Medicine, Division of Pulmonary and Critical Care Medicine, Department of Medicine, Samsung Medical Center, Seoul (Korea); Kang, Eun Young [Korea University Guro Hospital, Department of Diagnostic Radiology, Korea University College of Medicine, Seoul (Korea); Kim, Seonwoo [Sungkyunkwan University School of Medicine, Biostatistics Unit of the Samsung Biomedical Research Institute, Samsung Medical Center, Seoul (Korea)

    2006-09-15

    The aim of this work was to compare thin-section CT (TSCT) findings of drug-sensitive (DS) tuberculosis (TB), multidrug-resistant (MDR) TB, and nontuberculous mycobacterial (NTM) pulmonary disease in nonAIDS adults. During 2003, 216 (113 DS TB, 35 MDR TB, and 68 NTM) patients with smear-positive sputum for acid-fast bacilli (AFB), and who were subsequently confirmed to have mycobacterial pulmonary disease, underwent thoracic TSCT. The frequency of lung lesion patterns on TSCT and patients' demographic data were compared. The commonest TSCT findings were tree-in-bud opacities and nodules. On a per-person basis, significant differences were found in the frequency of multiple cavities and bronchiectasis (P<0.001, chi-square test and multiple logistic regression analysis). Multiple cavities were more frequent in MDR TB than in the other two groups and extensive bronchiectasis in NTM disease (multiple logistic regression analysis). Patients with MDR TB were younger than those with DS TB or NTM disease (P<0.001, multiple logistic regression analysis). Previous tuberculosis treatment history was significantly more frequent in patients with MDR TB or NTM disease (P<0.001, chi-square test and multiple logistic regression analysis). In patients with positive sputum AFB, multiple cavities, young age, and previous tuberculosis treatment history imply MDR TB, whereas extensive bronchiectasis, old age, and previous tuberculosis treatment history NTM disease. (orig.)

  14. What is killing? People's knowledge about coronary heart disease, attitude towards prevention and main risk reduction barriers in Ismailia, Egypt (descriptive cross-sectional study).

    Science.gov (United States)

    Seef, Sameh; Jeppsson, Anders; Stafström, Martin

    2013-01-01

    Cardiovascular diseases are a public health concern everywhere, especially ischemic or coronary heart diseases (CHD) which are on top of causes list of mortality and morbidity in both genders globally. From which nearly 80% can be because of modifiable risks. In Egypt, there is a lack of studies on the knowledge of people about coronary heart diseases and its modifiable risks. So, this research reported here we designed to measure the dimensions of peoples knowledge about CHD and their attitude towards prevention, and to identify the main risk reduction barriers. By using comprehensive cross-sectional, descriptive research design, all adult individuals attending the family health clinic at Suez Canal University Hospital were eligible for inclusion with total number 125 participants. An interview questionnaire designed and used to collect data. The study revealed that (10.4%) of participants had a history of CHD, and (7.2%) had a family history of CHD. 79.2% Had a satisfactory total knowledge about CHD, and (94.4%) had a positive total attitude towards prevention. Risk reduction barriers as a medical setting barriers were (24%), patient related barriers were (22.4%). Community-societal barriers were almost the same as knowledge barriers which were around (16%). At last the systemic-organizational barriers were (9.6%). The findings settled that, total knowledge about CHD was satisfactory but lower than the level total of attitude. More effort the health system needs to improve the settings and engage patients in their plans and breaking related barriers, with development of health education programs based on needs assessment. Further studies we recommend to explore the reasons and follow up the changes.

  15. Differences in Neural Mechanosensitivity Between Patients with Chronic Nonspecific Neck Pain With and Without Neuropathic Features. A Descriptive Cross-Sectional Study.

    Science.gov (United States)

    López-de-Uralde-Villanueva, Ibai; Beltran-Alacreu, Hector; Fernández-Carnero, Josué; Gil-Martínez, Alfonso; La Touche, Roy

    2016-01-01

    To assess differences in neural mechanosensitivity between patients with chronic nonspecific neck pain with and without neuropathic features (NF and No-NF, respectively). Descriptive, cross-sectional study. A primary care center, a hospital physiotherapy outpatient department, and a university campus. Chronic nonspecific neck pain patients classified by the self-completed leeds assessment of neuropathic symptoms and signs pain scale (S-LANSS; 49 patients with NF [S-LANSS ≥ 12] and 50 patients with No-NF [S-LANSS pain intensity according to the upper limb neural test 1 (ULNT1) for the median nerve and the modified passive neck flexion test (MPNFT) for the cervical region; secondary measurements included pain intensity, neck disability, kinesiophobia, and pain catastrophizing. Statistically significant differences between the NF and No-NF groups were found with respect to the onset of symptoms of ULNT1 (-15.11 [-23.19 to -7.03]) and MPNFT (-6.58 [-11.54 to -1.62]), as well as the outcomes of the visual analogue scale (Mean difference [95% Confidence Interval]; 7.12 [1.81-12.42]) and neck disability index (3.72 [1.72-5.71]). Both chronic nonspecific neck pain groups showed statistically significant differences compared with the control group for all outcomes assessed (P neck pain patients with NF have greater neural mechanosensitivity, pain intensity, and neck disability than those with No-NF. Published by Oxford University Press on behalf of the American Academy of Pain Medicine. 2016. This work is written by US Government employees and is in the public domain in the US.

  16. Care practices and traditional beliefs related to neonatal jaundice in northern Vietnam: a population-based, cross-sectional descriptive study.

    Science.gov (United States)

    Le, Loc T; Partridge, John Colin; Tran, Bich H; Le, Vui T; Duong, Tuan K; Nguyen, Ha T; Newman, Thomas B

    2014-10-14

    The National Hospital of Pediatrics in Vietnam performed >200 exchange transfusions annually (2006-08), often on infants presenting encephalopathic from lower-level hospitals. As factors delaying care-seeking are not known, we sought to study care practices and traditional beliefs relating to neonatal jaundice in northern Vietnam. We conducted a prospective, cross-sectional, population-based, descriptive study from November 2008 through February 2010. We prospectively identified mothers of newborns through an on-going regional cohort study. Trained research assistants administered a 78-item questionnaire to mothers during home visits 14-28 days after birth except those we could not contact or whose babies remained hospitalized at 28 days. We enrolled 979 mothers; 99% delivered at a health facility. Infants were discharged at a median age of 1.35 days. Only 11% received jaundice education; only 27% thought jaundice could be harmful. During the first week, 77% of newborns were kept in dark rooms. Only 2.5% had routine follow-up before 14 days. Among 118 mothers who were worried by their infant's jaundice but did not seek care, 40% held non-medical beliefs about its cause or used traditional therapies instead of seeking care. Phototherapy was uncommon: 6 (0.6%) were treated before discharge and 3 (0.3%) on readmission. However, there were no exchange transfusions, kernicterus cases, or deaths. Early discharge without follow-up, low maternal knowledge, cultural practices, and use of traditional treatments may limit or delay detection or care-seeking for jaundice. However, in spite of the high prevalence of these practices and the low frequency of treatment, no bad outcomes were seen in this study of nearly 1,000 newborns.

  17. How do university education and clinical experience influence pre-registration nursing students' infection control practice? A descriptive, cross sectional survey.

    Science.gov (United States)

    Hinkin, Jonathan; Cutter, Jayne

    2014-02-01

    This study aims to explore nursing students' knowledge of infection control and investigate how university education and clinical experience influence their infection control practice. In order to prevent and control healthcare associated infections all healthcare staff must be knowledgeable about infection control. However, knowledge and practice of infection control are often sub-optimal. Education has had variable results in improving the infection control knowledge of healthcare professionals yet, there have been few studies examining this issue in relation to pre-registration nursing students in the United Kingdom. This descriptive cross-sectional survey employed a questionnaire composed of predominantly closed questions for data collection. A non-probability, purposive sample of 354/444 (79.7%) nursing students from one university participated in the study. Knowledge was generally adequate in questions related to pathogen transmission, hand hygiene principles, glove use, immediate action following sharps' injuries, and risk reduction in relation to sharps and waste management. Topics that received less positive results related to the chain of infection, the use of alcohol gel and Clostridium difficile and the definition of inoculation injury. University education was the main influence on knowledge and practice (340/353, 96.3%), but mentors (322/354, 91.2%), nurses (316/353, 89.3%), doctors (175/353, 49.4%) and other members of the multi-disciplinary team (213/352, 60.2%) were also deemed influential. Workload, time, and availability of facilities and equipment also contributed to the adoption of infection control precautions. The findings illustrated the importance of both theoretical and practical knowledge, supported by competent role models. The study identified the complexities of knowledge acquisition and application in a practice based discipline. The support of a competent role model to assist in applying theory to practice is vital. The study has

  18. Who actually receives cell phone use while driving citations and how much are these laws enforced among states? A descriptive, cross-sectional study.

    Science.gov (United States)

    Rudisill, Toni M; Zhu, Motao

    2016-06-14

    While numerous cell phone use while driving laws have been passed among states, little information exists regarding who gets cited for these traffic infractions and how much these laws are enforced at the state-level within the USA. Cross-sectional, descriptive study. 14 states and the District of Columbia. Those receiving cell phone use while driving citations within included states from 2007 to 2013. Demographic characteristics of cited drivers were assessed. Rates of infractions per 100 000 licensed in-state drivers per year for various cell phone use while driving violations were calculated. Drivers were cited for hand-held use violations (n=2.5 million) more than texting (n=14 682) or young driver all cell phone bans (n=342). Among states that provided data for all traffic violations, cell phone use while driving citations comprised 1% of all written citations. Regardless of ban type, males (68.2%) were cited more frequently than females. Drivers 25-64 years of age (90.8%) were more likely to be cited for hand-held phone use. The average yearly rate of infractions per 100 000 licensed in-state drivers from 2010-2013 was 5.8 for texting bans, 2607 for hand-held bans, and 9954 for any traffic violation. Among cited drivers, age and sex differences existed by the type of ban violated. State-level enforcement appeared sparse. Due to the potential serious consequences of cell phone use while driving in the USA, more enforcement and targeted public safety campaigns are likely needed. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  19. Peripheral arterial disease among adult diabetic patients attending a large outpatient diabetic clinic at a national referral hospital in Uganda: a descriptive cross sectional study.

    Directory of Open Access Journals (Sweden)

    Raymond Mbayo Mwebaze

    Full Text Available BACKGROUND: Peripheral arterial disease (PAD is one of the recognised diabetic macro vascular complications. It is a marker of generalised systemic atherosclerosis and is closely associated with symptomatic coronary and cerebrovascular disease, hence significant morbidity and mortality. Among African adult diabetic populations, screening and diagnosis of PAD is frequently suboptimal. The aim of this study was to determine the prevalence and associated clinical factors of PAD in adult ambulatory diabetic patients attending the outpatient diabetic clinic of Mulago national referral and teaching hospital, Kampala Uganda. METHODS: In this descriptive cross sectional study, 146 ambulatory adult diabetic patients were studied. Information about their socio-demographic and clinical characteristics, fasting lipid profile status, blood pressure, glycated haemoglobin (HbA1c levels and presence of albuminuria was collected using a pre tested questionnaire. Measurement of ankle brachial index (ABI to assess for PAD, defined as a ratio less than 0.9 was performed using a portable 5-10 MHz Doppler device. Clinical factors associated with PAD were determined by comparing specific selected characteristics in patients with PAD and those without. RESULTS: The mean age/standard deviation of the study participants was 53.9/12.4 years with a male predominance (75, 51.4%. PAD was prevalent in 57 (39% study participants. Of these, 34 (59.6% had symptomatic PAD. The noted clinical factors associated with PAD in this study population were presence of symptoms of intermittent claudication and microalbuminuria. CONCLUSIONS: This study documents a high prevalence of PAD among adult ambulatory Ugandan diabetic patients. Aggressive screening for PAD using ABI measurement in adult diabetic patients should be emphasised in Uganda especially in the presence of symptoms of intermittent claudication and microalbuminuria.

  20. Prevalence of dental caries among a cohort of preschool children living in Gampaha district, Sri Lanka: A descriptive cross sectional study

    Directory of Open Access Journals (Sweden)

    Perera Priyantha J

    2012-11-01

    Full Text Available Abstract Background Dental caries among young children are a global problem. Scant attention is paid towards primary teeth, leading to high prevalence of dental caries. There are only few studies done in Sri Lanka, addressing oral hygiene among preschool children. Scientific evidence is in need to persuade authorities to establish a programme promoting oral hygiene among preschool children. Methods A descriptive cross sectional study was conducted in Ragama Medical officer of Health area. Consecutive children between 2 – 5 years of age, attending child welfare clinics were recruited for the study. Practices related to dental hygiene and socio-economic characteristics were obtained using an interviewer administered questionnaire. Mouth was examined for evidence of dental caries. Data collection and examination were done by two doctors who were trained for this purpose. The data were analysed using SSPS version 16. Results Total of 410 children were included. None had a routine visits to a dentist. Practices related to tooth brushing were satisfactory. Prevalence of dental caries gradually increased with age to reach 68.8% by 5 years. Mean total decayed-extracted-filled (deft score for the whole sample was 1.41 and Significant caries index (SIC was 4.09. Decayed tooth were the main contributor for the deft score and Care index was only 1.55. Girls had a significantly higher prevalence of caries than boys. Conclusions Dental care provided for Sri Lankan preschool children appears to be unsatisfactory as prevalence of dental caries among this cohort of preschool children was very high. There is an urgent need to improve dental care facilities for Sri Lankan preschool children.

  1. Distraction by smartphone use during clinical practice and opinions about smartphone restriction policies: A cross-sectional descriptive study of nursing students.

    Science.gov (United States)

    Cho, Sumi; Lee, Eunjoo

    2016-05-01

    Smartphone use in healthcare settings may distract healthcare providers and disrupt patient care. Moreover, it may lead to adverse events, thereby threatening patient safety. This study assessed nursing students' smartphone use as a source of distraction in clinical practice and identified their opinions about policies restricting smartphone use during patient care. A cross-sectional descriptive design was used with convenience sampling. Third-year nursing students (n=312) from two nursing schools in the Republic of Korea completed the survey in 2012. A self-report questionnaire-based on addiction theories for problem behaviors and literature on the distraction caused by cellular phone use-was used to assess smartphone use, experiences of distraction caused by smartphone use, and opinions about restriction policies on smartphone use during clinical practice. Nearly half (46.2%) of the nursing students used smartphones at least sometimes during clinical practice and about a quarter of the respondents (24.7%) were at least sometimes distracted by smartphones during clinical practice. The majority of the respondents (83.7%) had witnessed nurses using smartphones at least sometimes during their work. A few respondents (15.7%) agreed or strongly agreed with the policy for restricting smartphone use in hospitals. Students who used smartphones more often tended to disagree with restriction policies for smartphone use in hospitals. Awareness about the risks of smartphone use, especially regarding patient safety, is necessary for nursing students in school and hospital settings. Educators and faculty of nursing schools need to develop policies that encourage intelligent and safe use of smartphones during clinical practice. Copyright © 2016. Published by Elsevier Ltd.

  2. Challenges and predictors of exclusive breastfeeding among mothers attending the child welfare clinic at a regional hospital in Ghana: a descriptive cross-sectional study.

    Science.gov (United States)

    Diji, Abigail Kusi-Amponsah; Bam, Victoria; Asante, Ernest; Lomotey, Alberta Yemotsoo; Yeboah, Samuel; Owusu, Haim Acquah

    2016-01-01

    The challenges and predictors of exclusive breastfeeding (EBF) have been examined in many parts of the world. Considering the socio-cultural dynamics and the few research studies in Ghana, the factors that hinder and predict EBF practice in other countries may be different in the Ghanaian setting. The study therefore sought to assess the challenges and predictors of EBF among mothers attending a child welfare clinic at a regional hospital in Ghana. A descriptive cross-sectional study was carried out between January and March, 2015 to elicit information from 240 mothers who were sampled using simple random sampling technique. A validated structured questionnaire was used in collecting data on participants' socio-demographic characteristics and reported breastfeeding practices. Participants' breastfeeding challenges were rated on a Likert scale from 1 (not at all), 2 (mild), 3 (moderate), 4 (severe) to 5 (unbearable). In this study, EBF refers to birth of the infants up to six months. The top three breastfeeding challenges of mothers were: belief that breast milk alone was not sufficient in meeting their babies' nutritional needs [mean 3.43 (standard deviation {SD} 1.35)], short maternity leave period [mean 3.41 (SD 1.29)], and socio-cultural pressure to introduce water and artificial feeds [mean 3.39 (SD 1.28)]. Independent predictors of EBF were: infant's age [Adjusted Odds Ratio (AOR) 0.82 (95% Confidence Interval [CI] 0.71, 0.95)], and self-employment [AOR 2.67 (95% CI 1.11, 6.41)]. Mothers are confronted with numerous EBF challenges both at the individual and societal levels, and stakeholders need to consider these in order to support breastfeeding mothers to maximize outcomes. Reviewing the labour laws on Ghana's maternity leave to accommodate an extended maternity leave in addition to the employee's annual leave could further improve EBF practice rates.

  3. A Cross-Sectional Descriptive Study of Occupational Therapy Students' Perceptions and Attitudes Towards Spirituality and Spiritual Care in Occupational Therapy Education.

    Science.gov (United States)

    Mthembu, Thuli Godfrey; Roman, Nicolette Vanessa; Wegner, Lisa

    2016-10-01

    Spirituality and spiritual care both have received increased attention over the course of this past decade from different disciplines. However, for many years, in the occupational therapy profession, the importance of spirituality and spiritual care seems to be controversial because it is unclear how these concepts are integrated in occupational therapy education. Although occupational therapy students are being educated to consider a holistic and client-centred approach, spirituality is not regarded within this framework which diminishes the integrity of holistic approach. In South African occupational therapy education, it is unclear whether any single course on teaching and learning of spirituality and spiritual care exists. Thus, the aim of this study was to describe occupational therapy students' perceptions and attitudes regarding spirituality and spiritual care in occupational therapy education. A cross-sectional descriptive study design of undergraduate occupational therapy students from one educational institution was used. Data included demographic characteristics, responses on Spiritual Care-Giving Scale (SCGS), Spiritual and Spiritual Care Rating Scale (SSCRS) and Spirituality in Occupational Therapy Scale (SOTS). A response rate of 50.5 % (n = 100 out of 198) was achieved. In the SCGS, among the factors only factor 1 had the highest mean value score showing consistent agreement about spirituality, whereas in the SSCRS only three factors were found to have highest mean score and one with lowest mean score. In SOTS, participants had a highest score mean in relation to formal education and training about spirituality. Thus, in the integration of spirituality and spiritual care a holistic approach needs to be considered in education to enhance students' knowledge of how to address mind, body and spirit needs.

  4. Sleep disturbance and its associations with severity of dependence, depression and quality of life among heroin-dependent patients: a cross-sectional descriptive study.

    Science.gov (United States)

    Chen, Vincent Chin-Hung; Ting, Hua; Wu, Meng-Huan; Lin, Tsang-Yaw; Gossop, Michael

    2017-03-20

    Sleep disturbance is common and may adversely affect treatment outcome, mental health, and quality of life in heroin-dependent patients. Previous studies have focused upon patients receiving treatment. We conducted a cross-sectional descriptive study to explore the 1-month prevalence of sleep disturbance and its associations with socio-demographic, substance-related characteristics, severity of dependence, severity of depression, and quality of life among heroin-dependent patients before entering treatment program. The sample (n = 514) comprised individuals with heroin dependence attending the methadone maintenance treatment program and the therapeutic community at a psychiatric center in Nantou, Taiwan between 2008 and 2014. Sleep quality was measured using Pittsburgh Sleep Quality Index (PSQI) with a global score greater than 5 indicating sleep disturbance. Centre for Epidemiologic Studies Depression Scale, Severity of Dependence Scale, and World Health Organization Quality of Life-BREF were also approached. T-test, chi-square tests, and multivariate logistic regression were performed to measure associations between variables and sleep disturbance. The 1-month prevalence of sleep disturbance (PSQI > 5) was 76.3% among 514 subjects with heroin dependence. Heroin users with sleep disturbance had significantly more life events in the previous year, higher rate of unemployment, greater cigarette consumption, more substance related criminal convictions, longer length of heroin use, higher rate of injectors, greater severity of dependence, greater severity of depression, and lower quality of life compared to those without sleep disturbance. Severity of dependence, severity of depression, and physical health domain of quality of life remained significantly associated with sleep disturbance after adjusting for other variables. Heroin-dependent patients had a high 1-month prevalence of sleep disturbance, and this was associated with greater severity of dependence

  5. Properties of Pt-supported iron oxide ultra-thin films: similarity of Hubbard-corrected and hybrid density functional theory description.

    Science.gov (United States)

    Prada, Stefano; Giordano, Livia; Pacchioni, Gianfranco; Noguera, Claudine; Goniakowski, Jacek

    2014-10-14

    We report a first principles study on the properties of Pt(111)-supported FeO(111) monolayer. We confront results issued from PBE+U and HSE06 approximations, and analyze the impact of the more accurate hybrid description of the electronic structure of the metal/oxide interface on a large variety of calculated characteristics of this system. In particular, we analyze the behavior of its work function and its consequences on the spontaneous charging of adsorbed Au adatoms. We also consider the FeO2 nano-oxide phase and its peculiar oxygen storage characteristics, responsible for the unusual catalytic properties of FeO(x)/Pt system. We show that while the hybrid approximation does indeed substantially improve the electronic characteristics of iron oxide, of individual Au adatoms, or oxygen molecules, its overall impact on the calculated properties of the composed FeO/Pt system is very small. We assign this to the relatively small effect of the hybrid approximation on the band structure alignment. This shows that the less computationally demanding DFT+U approximation remains a fully adequate tool in theoretical studies on this kind of systems. This is particularly important for calculations on realistic systems, with large-size reconstructions induced by the lattice mismatch at the interface between the two materials.

  6. Impact of Thin-Section Computed Tomography-Determined Combined Pulmonary Fibrosis and Emphysema on Outcomes Among Patients With Resected Lung Cancer.

    Science.gov (United States)

    Hashimoto, Naozumi; Iwano, Shingo; Kawaguchi, Koji; Fukui, Takayuki; Fukumoto, Koichi; Nakamura, Shota; Mori, Shunsuke; Sakamoto, Koji; Wakai, Kenji; Yokoi, Kohei; Hasegawa, Yoshinori

    2016-08-01

    There is only limited information on the clinical impact of combined pulmonary fibrosis and emphysema (CPFE) on postoperative and survival outcomes among patients with resected lung cancer. In a retrospective analysis, data were reviewed from 685 patients with resected lung cancer between 2006 and 2011. The clinical impact of thin-section computed tomography (TSCT)-determined emphysema, fibrosis, and CPFE on postoperative and survival outcomes was evaluated. The emphysema group comprised 32.4% of the study population, the fibrosis group 2.8%, and the CPFE group 8.3%. The CPFE group had a more advanced pathologic stage and higher prevalence of squamous cell carcinoma as compared with the normal group without emphysema or fibrosis findings on TSCT. The incidence of postoperative complications was significantly higher in the CPFE group. Overall, the 30-day mortality in the CPFE group was 5.3%. Cancer recurrence at pathologic stage I and death due to either cancer or other causes were significantly higher in the CPFE group. Survival curves indicated that a finding of CPFE was associated with worse overall survival for patients with any stage disease. Multivariate analysis suggested that pathologic stage and CPFE were independent factors associated with worse overall survival. The adjusted hazard ratio of overall survival for the CPFE group versus the normal group was 2.990 (95% confidence interval: 1.801 to 4.962). Among patients with resected lung cancer, the presence of TSCT-determined CPFE might predict worse postoperative and survival outcomes. Copyright © 2016 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

  7. Attitudes and beliefs among high- and low-risk population groups towards β-thalassemia prevention: a cross-sectional descriptive study from India.

    Science.gov (United States)

    Chawla, Swati; Singh, Rajnish Kumar; Lakkakula, Bhaskar V K S; Vadlamudi, Raghavendra Rao

    2017-07-01

    " and "subjective norm." As this study is cross-sectional and descriptive in nature, the constructs of the theory should be considered as perceptions. However, we believe the patterns observed are indicative of "predicting behavior" that has far-reaching implications on health planners and administrators in designing β-thalassemia screening and prevention program.

  8. Stigmatization of people living with HIV/AIDS by healthcare workers at a tertiary hospital in KwaZulu-Natal, South Africa: a cross-sectional descriptive study.

    Science.gov (United States)

    Famoroti, Temitayo O; Fernandes, Lucy; Chima, Sylvester C

    2013-01-01

    The issue of stigma is very important in the battle against HIV/AIDS in Africa since it may affect patient attendance at healthcare centres for obtaining antiretroviral (ARV) medications and regular medical check-ups. Stigmatization creates an unnecessary culture of secrecy and silence based on ignorance and fear of victimization. This study was designed to determine if there is external stigmatization of people living with HIV and AIDS (PLWHA) by health care workers (HCWs) at a tertiary hospital in KwaZulu-Natal (KZN) province, South Africa. The study investigated the impact of knowledge of HIV/AIDS by HCWs on treatment of patients, as well as the comfort level and attitude of HCWs when rendering care to PLWHA. A descriptive cross sectional study was designed to collect data using an anonymous self-administered structured questionnaire from 334 HCWs. The study was conducted in clinical departments of a large multidisciplinary 922-bed tertiary care teaching hospital in Durban, KZN. Overall HCWs had an above average knowledge about HIV/AIDS although some gaps in knowledge were identified. Tests of statistical significance showed that there was association between level of education and knowledge of HIV/AIDs (p ≤ 0.001); occupation and knowledge of HIV/AIDS (p ≤ 0.001); and gender and knowledge of HIV/AIDS (p = 0.004). Test for comfort level was only significant for gender, with males showing more comfort and empathy when dealing with PLWHA (p = 0.003). The study also revealed that patients were sometimes tested for HIV without informed consent before surgery, due to fear of being infected, and there was some gossiping about patients' HIV status by HCWs, thereby compromising patient confidentiality. The majority of HCWs showed a willingness to report incidents of stigmatization and discrimination to higher authorities, for better monitoring and control. Although knowledge, attitude and comfort level of HCWs taking care of PLWHA was above average, enforcement of

  9. Health professions faculty beliefs, confidence, use, and perceptions of organizational culture and readiness for EBP: A cross-sectional, descriptive survey.

    Science.gov (United States)

    Milner, Kerry A; Bradley, Holly B; Lampley, Tammy

    2018-05-01

    Evidence-based practice (EBP) is an essential skill and ethical obligation for all practicing health professions clinicians because of its strong association with improved health outcomes. Emerging evidence suggests that faculty who prepare these clinicians lack proficiency to teach EBP. The purpose of this study was to describe; 1) health profession faculty beliefs about and confidence in their ability to teach and implement EBP, 2) use of EBP for education, 3) organizational culture and readiness for EBP; and to determine whether relationships exist among these variables. This study used a cross-sectional, descriptive survey design. College of Nursing (CON) and College of Health Professions (CHP) faculty from a university located in the Northeast, United States. Faculty were defined as anyone teaching a course for the CON or CHP during the fall of 2016. Faculty were invited to complete an electronic survey measuring EBP beliefs, EBP use, and EBP organizational culture and readiness. The survey was comprised of three tools developed specifically for health professions educators in 2010 by Fineout-Overholt & Melnyk. Sixty-nine faculty returned usable surveys (25.5% response rate). Mean EBP beliefs score was 89.49 (SD = 10.94) indicating respondents had a firm belief in and confidence in their ability to implement and teach EBP. Mean EBP use was 32.02 (SD = 20.59) indicating that respondents taught and implemented EBP between 1 and 3 times in the last 8-weeks. Mean EBP culture and readiness score was 90.20 (SD = 15.23) indicating essential movement toward a sustainable culture of college-wide integration of EBP. Mean scores for beliefs/confidence were higher for full-time clinical faculty compared to other groups [F (2, 55)  = 0.075, p = 0.928; ηp 2  = 0.003)]. Adjunct faculty reported higher EBP behaviors expected by health profession educators in the last 8-weeks compared to other groups [F (2, 55)  = 0.251, p = 0.779; ηp 2 . =0

  10. Potential impacts of OCS oil and gas activities on fisheries. Volume 1. Annotated bibliography and database descriptions for target-species distribution and abundance studies. Section 1, Part 2. Final report

    International Nuclear Information System (INIS)

    Tear, L.M.

    1989-10-01

    The purpose of the volume is to present an annotated bibliography of unpublished and grey literature related to the distribution and abundance of select species of finfish and shellfish along the coasts of the United States. The volume also includes descriptions of databases that contain information related to target species' distribution and abundance. An index is provided at the end of each section to help the reader locate studies or databases related to a particular species

  11. The design, construction and first-phase heavy vehicle simulator testing results on full scale ultra-thin reinforced concrete test sections at Rayton, South Africa

    CSIR Research Space (South Africa)

    Du Plessis, L

    2016-09-01

    Full Text Available Ultra-Thin Reinforced Concrete Pavements (UTRCP) are successfully being used in residential streets and low-volume road applications in South Africa. Due to its popularity in this domain the Gauteng Provincial Department of Roads and Transport...

  12. Low-Dose (2-mSv) CT in Adolescents and Young Adults With Suspected Appendicitis: Advantages of Additional Review of Thin Sections Using Multiplanar Sliding-Slab Averaging Technique.

    Science.gov (United States)

    Lee, Yoon Jin; Kim, Bohyoung; Ko, Yousun; Cho, Kyung Eun; Hong, Seong Sook; Kim, Dong Hwan; Song, Hyunjoo; Lee, Kyoung Ho

    2015-11-01

    The purpose of this study is to assess the advantages of additional multiplanar sliding-slab averaging review of 2-mm-thick (thin) sections over stack review of 5-mm-thick (thick) sections in difficult cases of 2-mSv CT in adolescents and young adults with suspected appendicitis. We included 149 patients (mean age, 28.0 years; 61 male patients and 88 female patients) for whom the initial CT reports were inconclusive for the diagnosis of appendicitis. Five independent radiologists retrospectively reviewed the thick sections in the stack mode and then the thin sections using sliding-slab averaging. In each review, they rated the likelihood of appendicitis and the appendix visualization using 5- and 3-point Likert scales, respectively. Diagnostic performance and confidence were compared between the two reviews using ROC analysis, McNemar tests, and Wilcoxon signed-rank tests. The pooled AUCs were 0.90 and 0.93 for the stack and sliding-slab averaging reviews, respectively (90% CI for the difference, 0.002-0.06; p = 0.087). For the individual readers, the sliding-slab averaging review tended to increase the AUC (range, 0.86-0.93 for stack vs 0.87-0.97 for sliding-slab averaging review), improve the confidence in diagnosing (mean score, 3.6-4.7 vs 3.9-4.7) or ruling out (1.6-2.1 vs 1.5-1.9) appendicitis, reduce indeterminate interpretations (0-15% vs 0-11%), and enhance the normal appendix visualization (1.1-1.7 vs 1.1-1.9), although the differences were not always statistically significant. Sliding-slab averaging review of thin sections is helpful when the diagnosis of appendicitis is difficult at 2-mSv CT in adolescents and young adults.

  13. Detailed petrographic descriptions and microprobe data for tertiary silicic volcanic rocks in drill hole USW G-1, Yucca Mountain, Nevada

    Energy Technology Data Exchange (ETDEWEB)

    Caporuscio, F.A.; Warren, R.G.; Broxton, D.E.

    1985-12-01

    This report contains detailed petrographic descriptions of 74 thin sections from drill hole USW G-1 at Yucca Mountain, Nevada. These descriptions are keyed to the distinctions between devitrified, vitrophyre, vitric, and zeolitized intervals below the Topopah Spring Member repository horizon. The petrographic features of the zeolitized intervals down through the Crater Flat tuff, as well as the sorption properties determined from these intervals, suggest that these zeolite occurrences may each have comparable sorptive capability.

  14. Improving FTIR imaging speciation of organic compound residues or their degradation products in wall painting samples, by introducing a new thin section preparation strategy based on cyclododecane pre-treatment.

    Science.gov (United States)

    Papliaka, Zoi Eirini; Vaccari, Lisa; Zanini, Franco; Sotiropoulou, Sophia

    2015-07-01

    Fourier transform infrared (FTIR) imaging in transmission mode, employing a bidimensional focal plane array (FPA) detector, was applied for the detection and spatially resolved chemical characterisation of organic compounds or their degradation products within the stratigraphy of a critical group of fragments, originating from prehistoric and roman wall paintings, containing a very low concentration of subsisted organic matter or its alteration products. Past analyses using attenuated total reflection (ATR) or reflection FTIR on polished cross sections failed to provide any evidence of any organic material assignable as binding medium of the original painting. In order to improve the method's performance, in the present study, a new method of sample preparation in thin section was developed. The procedure is based on the use of cyclododecane C12H24 as embedding material and a subsequent double-side polishing of the specimen. Such procedure provides samples to be studied in FTIR transmission mode without losing the information on the spatial distribution of the detected materials in the paint stratigraphy. For comparison purposes, the same samples were also studied after opening their stratigraphy with a diamond anvil cell. Both preparation techniques offered high-quality chemical imaging of the decay products of an organic substance, giving clues to the painting technique. In addition, the thin sections resulting from the cyclododecane pre-treatment offered more layer-specific data, as the layer thickness and order remained unaffected, whereas the samples resulting from compression within the diamond cell were slightly deformed; however, since thinner and more homogenous, they provided higher spectral quality in terms of S/N ratio. In summary, the present study illustrates the appropriateness of FTIR imaging in transmission mode associated with a new thin section preparation strategy to detect and localise very low-concentrated organic matter subjected to

  15. Experimental determination of neutron capture cross sections of fast reactor structure materials integrated in intermediate energy spectra. Vol. 2: description of experimental structure

    International Nuclear Information System (INIS)

    Tassan, S.

    1978-01-01

    A selection of technical documents is given concerning the experimental determination of the neutron capture cross-sections of fast reactor structural materials (Fe, Cr, Ni...) integrated over the intermediate energy spectra. The experimental structure project and modifications of the reactor RB2 for this experiment, together with criticality and safety calculations, are presented

  16. Descriptive Research

    DEFF Research Database (Denmark)

    Wigram, Anthony Lewis

    2003-01-01

    Descriptive research is described by Lathom-Radocy and Radocy (1995) to include Survey research, ex post facto research, case studies and developmental studies. Descriptive research also includes a review of the literature in order to provide both quantitative and qualitative evidence of the effect...... starts will allow effect size calculations to be made in order to evaluate effect over time. Given the difficulties in undertaking controlled experimental studies in the creative arts therapies, descriptive research methods offer a way of quantifying effect through descriptive statistical analysis...

  17. Low-energy cross-section calculations of single molecules by electron impact: a classical Monte Carlo transport approach with quantum mechanical description

    Science.gov (United States)

    Madsen, J. R.; Akabani, G.

    2014-05-01

    The present state of modeling radio-induced effects at the cellular level does not account for the microscopic inhomogeneity of the nucleus from the non-aqueous contents (i.e. proteins, DNA) by approximating the entire cellular nucleus as a homogenous medium of water. Charged particle track-structure calculations utilizing this approximation are therefore neglecting to account for approximately 30% of the molecular variation within the nucleus. To truly understand what happens when biological matter is irradiated, charged particle track-structure calculations need detailed knowledge of the secondary electron cascade, resulting from interactions with not only the primary biological component—water--but also the non-aqueous contents, down to very low energies. This paper presents our work on a generic approach for calculating low-energy interaction cross-sections between incident charged particles and individual molecules. The purpose of our work is to develop a self-consistent computational method for predicting molecule-specific interaction cross-sections, such as the component molecules of DNA and proteins (i.e. nucleotides and amino acids), in the very low-energy regime. These results would then be applied in a track-structure code and thereby reduce the homogenous water approximation. The present methodology—inspired by seeking a combination of the accuracy of quantum mechanics and the scalability, robustness, and flexibility of Monte Carlo methods—begins with the calculation of a solution to the many-body Schrödinger equation and proceeds to use Monte Carlo methods to calculate the perturbations in the internal electron field to determine the interaction processes, such as ionization and excitation. As a test of our model, the approach is applied to a water molecule in the same method as it would be applied to a nucleotide or amino acid and compared with the low-energy cross-sections from the GEANT4-DNA physics package of the Geant4 simulation toolkit

  18. Quantitation of repaglinide and metabolites in mouse whole-body thin tissue sections using droplet-based liquid microjunction surface sampling-high-performance liquid chromatography-electrospray ionization tandem mass spectrometry.

    Science.gov (United States)

    Chen, Weiqi; Wang, Lifei; Van Berkel, Gary J; Kertesz, Vilmos; Gan, Jinping

    2016-03-25

    Herein, quantitation aspects of a fully automated autosampler/HPLC-MS/MS system applied for unattended droplet-based surface sampling of repaglinide dosed thin tissue sections with subsequent HPLC separation and mass spectrometric analysis of parent drug and various drug metabolites were studied. Major organs (brain, lung, liver, kidney and muscle) from whole-body thin tissue sections and corresponding organ homogenates prepared from repaglinide dosed mice were sampled by surface sampling and by bulk extraction, respectively, and analyzed by HPLC-MS/MS. A semi-quantitative agreement between data obtained by surface sampling and that by employing organ homogenate extraction was observed. Drug concentrations obtained by the two methods followed the same patterns for post-dose time points (0.25, 0.5, 1 and 2 h). Drug amounts determined in the specific tissues was typically higher when analyzing extracts from the organ homogenates. In addition, relative comparison of the levels of individual metabolites between the two analytical methods also revealed good semi-quantitative agreement. Copyright © 2015 Elsevier B.V. All rights reserved.

  19. The properties of SIRT, TVM, and DART for 3D imaging of tubular domains in nanocomposite thin-films and sections

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Delei [Laboratory of Materials and Interface Chemistry, Department of Chemical Engineering and Chemistry, Eindhoven University of Technology, Den Dolech 2, 5612 AZ Eindhoven (Netherlands); Dutch Polymer Institute (DPI), P.O. Box 902, 5600 AX Eindhoven (Netherlands); Goris, Bart [EMAT, University of Antwerp, Groenenborgerlaan 171, B-2020 Antwerp (Belgium); Bleichrodt, Folkert [Centrum Wiskunde and Informatica, Science Park 123, NL-1098XG Amsterdam (Netherlands); Mezerji, Hamed Heidari; Bals, Sara [EMAT, University of Antwerp, Groenenborgerlaan 171, B-2020 Antwerp (Belgium); Batenburg, Kees Joost [Centrum Wiskunde and Informatica, Science Park 123, NL-1098XG Amsterdam (Netherlands); With, Gijsbertus de [Laboratory of Materials and Interface Chemistry, Department of Chemical Engineering and Chemistry, Eindhoven University of Technology, Den Dolech 2, 5612 AZ Eindhoven (Netherlands); Friedrich, Heiner, E-mail: h.friedrich@tue.nl [Laboratory of Materials and Interface Chemistry, Department of Chemical Engineering and Chemistry, Eindhoven University of Technology, Den Dolech 2, 5612 AZ Eindhoven (Netherlands)

    2014-12-15

    In electron tomography, the fidelity of the 3D reconstruction strongly depends on the employed reconstruction algorithm. In this paper, the properties of SIRT, TVM and DART reconstructions are studied with respect to having only a limited number of electrons available for imaging and applying different angular sampling schemes. A well-defined realistic model is generated, which consists of tubular domains within a matrix having slab-geometry. Subsequently, the electron tomography workflow is simulated from calculated tilt-series over experimental effects to reconstruction. In comparison with the model, the fidelity of each reconstruction method is evaluated qualitatively and quantitatively based on global and local edge profiles and resolvable distance between particles. Results show that the performance of all reconstruction methods declines with the total electron dose. Overall, SIRT algorithm is the most stable method and insensitive to changes in angular sampling. TVM algorithm yields significantly sharper edges in the reconstruction, but the edge positions are strongly influenced by the tilt scheme and the tubular objects become thinned. The DART algorithm markedly suppresses the elongation artifacts along the beam direction and moreover segments the reconstruction which can be considered a significant advantage for quantification. Finally, no advantage of TVM and DART to deal better with fewer projections was observed. - Highlights: • Dose and tilt-scheme dependence of SIRT, TVM and DART tomograms are quantified. • SIRT is the most stable method and insensitive to changes in angular sampling. • TVM significantly reduces noise but objects become thinned. • DART markedly suppresses the elongation artifacts. • No advantage of TVM and DART for fewer projections is observed.

  20. Macroscopic and microscopic description of HE-HI collisions; classical equations of motion calculations. [Rapidity, cross sections, central and noncentral collisions

    Energy Technology Data Exchange (ETDEWEB)

    Bodmer, A. R.

    1978-01-01

    The study of high energy heavy ion reactions includes the three principle a priori approaches used for central collisions, namely, hydrodynamics, cascade--Boltzman equation, and the classical equations of motion. While no clearly justified central or near central collisions are found, the classical equations of motion are used to illustrate some general features of these reactions. It is expected that the hot nuclear matter produced in such collisions is a dense, viscous, and thermally conductive fluid with important nonequilibrium and nonclassical features, rapidity, distribution, noncentral collisions, potential dependent effects for a given two-body scattering, and c.m. cross sections for a central collision with given parameters are among the properties considered. 12 references. (JFP)

  1. A survey of xerophilic Aspergillus from indoor environment, including descriptions of two new section Aspergillus species producing eurotium-like sexual states

    DEFF Research Database (Denmark)

    Visagie, Cobus M.; Yilmaz, Neriman; Renaud, Justin B.

    2017-01-01

    . Additional cultures deposited as Eurotium were received from the Canadian Collection of Fungal Cultures and were also re-identified during this study. Among all strains, two species were found to be new and are introduced here as A. mallochii and A. megasporus. Phylogenetic comparisons with other species...... of section Aspergillus were made using sequences of ITS, beta-tubulin, calmodulin and RNA polymerase II second largest subunit. Morphological observations were made from cultures grown under standardized conditions. Aspergillus mallochii does not grow at 37 degrees C and produces roughened ascospores...... with incomplete equatorial furrows. Aspergillus megasporus produces large conidia (up to 12 mu m diam) and roughened ascospores with equatorial furrows. Echinulin, quinolactacin A(1) & A(2), preechinulin and neoechinulin A & B were detected as major extrolites of A. megasporus, while neoechinulin A & B...

  2. Characteristics and treatment outcomes of tuberculosis patients who “transfer-in” to health facilities in Harare City, Zimbabwe: a descriptive cross-sectional study

    Directory of Open Access Journals (Sweden)

    Takarinda Kudakwashe C

    2012-11-01

    Full Text Available Abstract Background Zimbabwe is among the 22 Tuberculosis (TB high burden countries worldwide and runs a well-established, standardized recording and reporting system on case finding and treatment outcomes. During TB treatment, patients transfer-out and transfer-in to different health facilities, but there are few data from any national TB programmes about whether this process happens and if so to what extent. The aim of this study therefore was to describe the characteristics and outcomes of TB patients that transferred into Harare City health department clinics under the national TB programme. Specific objectives were to determine i the proportion of a cohort of TB patients registered as transfer-in, ii the characteristics and treatment outcomes of these transfer-in patients and iii whether their treatment outcomes had been communicated back to their respective referral districts after completion of TB treatment. Methods Data were abstracted from patient files and district TB registers for all transfer-in TB patients registered from January to December 2010 within Harare City. Descriptive statistics were calculated. Results Of the 7,742 registered TB patients in 2010, 263 (3.5% had transferred-in: 148 (56% were males and overall median age was 33 years (IQR, 26–40. Most transfer-in patients (74% came during the intensive phase of TB treatment, and 58% were from rural health-facilities. Of 176 patients with complete data on the time period between transfer-in and transfer-out, only 85 (48% arrived for registration in Harare from referral districts within 1 week of being transferred-out. Transfer-in patients had 69% treatment success, but in 21% treatment outcome status was not evaluated. Overall, 3/212 (1.4% transfer-in TB patients had their TB treatment outcomes reported back to their referral districts. Conclusion There is need to devise better strategies of following up TB patients to their referral Directly Observed Treatment (DOT centres

  3. Characteristics and treatment outcomes of tuberculosis patients who "transfer-in" to health facilities in Harare City, Zimbabwe: a descriptive cross-sectional study.

    Science.gov (United States)

    Takarinda, Kudakwashe C; Harries, Anthony D; Mutasa-Apollo, Tsitsi; Sandy, Charles; Mugurungi, Owen

    2012-11-15

    Zimbabwe is among the 22 Tuberculosis (TB) high burden countries worldwide and runs a well-established, standardized recording and reporting system on case finding and treatment outcomes. During TB treatment, patients transfer-out and transfer-in to different health facilities, but there are few data from any national TB programmes about whether this process happens and if so to what extent. The aim of this study therefore was to describe the characteristics and outcomes of TB patients that transferred into Harare City health department clinics under the national TB programme. Specific objectives were to determine i) the proportion of a cohort of TB patients registered as transfer-in, ii) the characteristics and treatment outcomes of these transfer-in patients and iii) whether their treatment outcomes had been communicated back to their respective referral districts after completion of TB treatment. Data were abstracted from patient files and district TB registers for all transfer-in TB patients registered from January to December 2010 within Harare City. Descriptive statistics were calculated. Of the 7,742 registered TB patients in 2010, 263 (3.5%) had transferred-in: 148 (56%) were males and overall median age was 33 years (IQR, 26-40). Most transfer-in patients (74%) came during the intensive phase of TB treatment, and 58% were from rural health-facilities. Of 176 patients with complete data on the time period between transfer-in and transfer-out, only 85 (48%) arrived for registration in Harare from referral districts within 1 week of being transferred-out. Transfer-in patients had 69% treatment success, but in 21% treatment outcome status was not evaluated. Overall, 3/212 (1.4%) transfer-in TB patients had their TB treatment outcomes reported back to their referral districts. There is need to devise better strategies of following up TB patients to their referral Directly Observed Treatment (DOT) centres from TB diagnosing centres to ensure that they arrive

  4. Development and assessment of a questionnaire for a descriptive cross – sectional study concerning parents' knowledge, attitudes and practises in antibiotic use in Greece

    Directory of Open Access Journals (Sweden)

    Goutziana Georgia P

    2009-05-01

    Full Text Available Abstract Background Upper Respiratory Infections (URIs are common in children. The cause is usually viral, but parents' attitude often contributes to inappropriate antibiotic prescribing, promoting antibiotic resistance. The objective is to describe the process of developing a questionnaire to assess parents' Knowledge, Attitude and Practices (KAP concerning the role of antibiotics when children suffer from URIs, as well as to evaluate the response rates, the completeness and the reliability (Cronbach of the questionnaires. Finally, to note any limitations of the study. Methods Literature review, along with pre – testing yielded a questionnaire designed to assess the parents' KAP – level. A postal survey was set, in a national sample of 200 schools stratified by geographical region. The participants consist of a multistage geographical cluster sample of 8000 parents. The influence of demographic characteristics (i.e. sex, age, education was analyzed. Cronbach index test and factor analysis were used to assess the reliability of the questionnaire. Results The response rate of the parents was 69%. Islands presented the lowest response rate while in Northern Greece the response rate was the highest. Sixty – eight point nine percent of the sample returned questionnaires fully completed, while 91.5% completed 95% of the questions. Three questions out of 70 were answered in a very low rate which was associated mostly with immigrant respondents. The section describing parents' attitude toward antibiotic use was not completed as much as the sections of knowledge or practices. The questions were factor analyzed and 10 out of the 21 extracted factors were finally evaluated, reducing the number of independent variables to 46. The reliability of the questionnaire was 0.55. However, only items that increased the Cronbach when added were eventually included in the final scales raising the internal consistency to 0.68. Limitations of the study, such as

  5. Burnout syndrome in first to sixth-year medical students at a private university in the north of Mexico: descriptive cross-sectional study.

    Science.gov (United States)

    Asencio-López, Laura; Almaraz-Celis, Guillermo Daniel; Carrillo Maciel, Vicente; Huerta Valenzuela, Paola; Silva Goytia, Luis; Muñoz Torres, Marcos; Monroy Caballero, Fernando; Regalado Tapia, Joel; Dipp Martin, Kerigma; López Miranda, Dinorah; Medina Lavenant, Clyvia; Pizarro Rodríguez, Karen; Santiago Martínez, Cesar; Saucedo Aparicio, Alma Geovanna; Flores Lepe, Rodolfo

    2016-04-25

    Burnout syndrome is a three-dimensional clinical syndrome caused by stress at work. It is frequent in professions which require direct contact with people. In Mexico, the presence of Burnout Syndrome in doctors and medical students, is characterized as a threat to their health, quality of life and professional performance. To evaluate the prevalence of burnout syndrome in students of years 1 through 6 of medical school at a private university in northern Mexico. Cross-sectional study in the Escuela de Medicina Campus Laguna de la Universidad Autónoma de Durango. The one-dimensional scale of Burnout Student (EUBE) and the Maslach Burnout Inventory (MBI) were applied to the participants. SPSS 19 was used to analyze the data. Of the 344 students, 255 participated; 153 from years 1 to 3 (group 1); and 72 from years 4 to 6 (group 2). We found that 94.1% of the students of group 1 had mild burnout syndrome, and 2.8% had moderate burnout syndrome. In Group 2, 27.8% had moderate burnout syndrome, and 8.3% had severe burnout syndrome. The prevalence of severe burnout syndrome was higher in group 2 than in group 1 (p=0.02). Burnout syndrome affects medical students across all stages of their studies, and develops in a progressive way. In our study, external factors have no influence on the development of burnout syndrome.

  6. The Sectional Stratospheric Sulfate Aerosol module (S3A-v1) within the LMDZ general circulation model: description and evaluation against stratospheric aerosol observations

    Science.gov (United States)

    Kleinschmitt, Christoph; Boucher, Olivier; Bekki, Slimane; Lott, François; Platt, Ulrich

    2017-09-01

    Stratospheric aerosols play an important role in the climate system by affecting the Earth's radiative budget as well as atmospheric chemistry, and the capabilities to simulate them interactively within global models are continuously improving. It is important to represent accurately both aerosol microphysical and atmospheric dynamical processes because together they affect the size distribution and the residence time of the aerosol particles in the stratosphere. The newly developed LMDZ-S3A model presented in this article uses a sectional approach for sulfate particles in the stratosphere and includes the relevant microphysical processes. It allows full interaction between aerosol radiative effects (e.g. radiative heating) and atmospheric dynamics, including e.g. an internally generated quasi-biennial oscillation (QBO) in the stratosphere. Sulfur chemistry is semi-prescribed via climatological lifetimes. LMDZ-S3A reasonably reproduces aerosol observations in periods of low (background) and high (volcanic) stratospheric sulfate loading, but tends to overestimate the number of small particles and to underestimate the number of large particles. Thus, it may serve as a tool to study the climate impacts of volcanic eruptions, as well as the deliberate anthropogenic injection of aerosols into the stratosphere, which has been proposed as a method of geoengineering to abate global warming.

  7. Dual parametrization of the proton generalized parton distribution functions H and E, and description of the deeply virtual Compton scattering cross sections and asymmetries

    International Nuclear Information System (INIS)

    Guzey, V.; Teckentrup, T.

    2006-01-01

    We develop the minimal model of a new leading order parametrization of generalized parton distributions (GPDs) introduced by Polyakov and Shuvaev. The model for GPDs H and E is formulated in terms of the forward quark distributions, the Gegenbauer moments of the D-term, and the forward limit of the GPD E. The model is designed primarily for small and medium-size values of x B , x B ≤0.2. We examine two different models of the t dependence of the GPDs: the factorized exponential model and the nonfactorized Regge-motivated model. Using our model, we successfully described the deeply virtual Compton scattering (DVCS) cross section measured by H1 and ZEUS, the moments of the beam-spin A LU sinφ , the beam-charge A C cosφ , and the transversely polarized target A UT sinφcosφ DVCS asymmetries measured by HERMES and A LU sinφ measured by CLAS. The data on A C cosφ prefer the Regge-motivated model of the t dependence of the GPDs. The data on A UT sinφcosφ indicate that the u and d quarks carry only a small fraction of the proton total angular momentum

  8. What have we learned from reporting safety incidents in the Surgical Block?: Cross-sectional descriptive study of two-years of activity of a multidisciplinary analytical group.

    Science.gov (United States)

    Caba Barrientos, F; Rodríguez Morillo, A; Galisteo Domínguez, R; Del Nozal Nalda, M; Almeida González, C V; Echevarría Moreno, M

    2018-01-17

    Incident Reporting Systems (IRS) are considered a tool that facilitates learning and safety culture. Using the experience gained with SENSAR, we evaluated the feasibility and the activity of a multidisciplinary group analyzing incidents in the surgical patient notified to a general community system, that of the Observatory for Patient Safety (OPS). Cross-sectional observational study planned for two years. After training in the analysis, a multidisciplinary group was created in terms of specialties and professional categories, which would analyze the incidents in the surgical patient notified to the OPS. Incidents are classified and their circumstances analyzed. Between March 2015 and 2017, 95 incidents were reported (4 by non-professionals). Doctors reported more than nurses, at 54 (56.84%) vs. 37 (38.94%). The anaesthesia unit reported most at 46 (48.42%) (P=.025). The types of incidents mainly related to the care procedure (30.52%); to the preoperative period (42.10%); and to the place, the surgical area (48.42%). Significant differences were detected according to the origin of the notifier (P=.03). No harm, or minor morbidity, constituted 88% of the incidents. Errors were identified in 79%. The analysis of the incidents directed the measures to be taken. The activity undertaken by the multidisciplinary analytical group during the period of study facilitated knowledge of the system among the professionals and enabled the identification of areas for improvement in the Surgical Block at different levels. Copyright © 2017 Sociedad Española de Anestesiología, Reanimación y Terapéutica del Dolor. Publicado por Elsevier España, S.L.U. All rights reserved.

  9. A cross-sectional descriptive study of the family functioning, health and social support of hospital patients with family violence backgrounds.

    Science.gov (United States)

    Kivelä, Salla; Leppäkoski, Tuija; Helminen, Mika; Paavilainen, Eija

    2017-12-19

    Family violence (FV) has serious effects on the health and well-being of the family. The health sector plays a vital role in FV prevention by helping to identify abuse early, providing victims with the necessary treatment and referring patients to appropriate care. The aim of the present cross-sectional study was to describe the prevalence of FV among hospital patients, as well as to assess the association between family functioning, health and social support, considering patients as the perpetrators or victims of violence. The data were collected using a Family Functioning, Health and Social Support (FAFHES) questionnaire that was given to patients who visited a Finnish central hospital between October 2012 and April 2013. As a result, the data (N = 188) were contributed by the patients who returned the questionnaire and gave permission for a follow-up survey. The participation rate was 47%, of which 73% were women and 27% were men. Their ages ranged from 18 to 89 years. The data were analysed with quantitative methods using the unadjusted analyses and linear regression model. In total, 24% of both the male and female participants had experienced or used violence at home or in the family. Of these, 22 had been the perpetrators, and 23 had been the victims. Participants in relationships and who were living together had less violence than singles and those who were not living together. The family functioning and health of the participants who had experienced or used FV were worse than those of the participants who had not. Various patients can have an FV background, and nursing professionals are on the front line to identify and intervene in FV situations. The results of this study can be utilised in the treatment of FV victims and perpetrators by training healthcare workers to identify and intervene in violence. © 2017 Nordic College of Caring Science.

  10. Cross-sectional description of nursing and midwifery pre-service education accreditation in east, central, and southern Africa in 2013.

    Science.gov (United States)

    McCarthy, Carey F; Gross, Jessica M; Verani, Andre R; Nkowane, Annette M; Wheeler, Erica L; Lipato, Thokozire J; Kelley, Maureen A

    2017-07-24

    In 2013, the World Health Organization issued guidelines, Transforming and Scaling Up Health Professional Education and Training, to improve the quality and relevance of health professional pre-service education. Central to these guidelines was establishing and strengthening education accreditation systems. To establish what current accreditation systems were for nursing and midwifery education and highlight areas for strengthening these systems, a study was undertaken to document the pre-service accreditation policies, approaches, and practices in 16 African countries relative to the 2013 WHO guidelines. This study utilized a cross-sectional group survey with a standardized questionnaire administered to a convenience sample of approximately 70 nursing and midwifery leaders from 16 countries in east, central, and southern Africa. Each national delegation completed one survey together, representing the responses for their country. Almost all countries in this study (15; 94%) mandated pre-service nursing education accreditation However, there was wide variation in who was responsible for accrediting programs. The percent of active programs accredited decreased by program level from 80% for doctorate programs to 62% for masters nursing to 50% for degree nursing to 35% for diploma nursing programs. The majority of countries indicated that accreditation processes were transparent (i.e., included stakeholder engagement (81%), self-assessment (100%), evaluation feedback (94%), and public disclosure (63%)) and that the processes were evaluated on a routine basis (69%). Over half of the countries (nine; 56%) reported limited financial resources as a barrier to increasing accreditation activities, and seven countries (44%) noted limited materials and technical expertise. In line with the 2013 WHO guidelines, there was a strong legal mandate for nursing education accreditation as compared to the global average of 50%. Accreditation levels were low in the programs that produce

  11. Descriptive study of sedentary behaviours in 35,444 French working adults: cross-sectional findings from the ACTI-Cités study.

    Science.gov (United States)

    Saidj, Madina; Menai, Mehdi; Charreire, Hélène; Weber, Christiane; Enaux, Christophe; Aadahl, Mette; Kesse-Guyot, Emmanuelle; Hercberg, Serge; Simon, Chantal; Oppert, Jean-Michel

    2015-04-14

    Given the unfavourable health outcomes associated with sedentary behaviours, there is a need to better understand the context in which these behaviours take place to better address this public health concern. We explored self-reported sedentary behaviours by type of day (work/non-work), occupation, and perceptions towards physical activity, in a large sample of adults. We assessed sedentary behaviours cross-sectionally in 35,444 working adults (mean ± SD age: 44.5 ± 13.0 y) from the French NutriNet-Santé web-based cohort. Participants self-reported sedentary behaviours, assessed as domain-specific sitting time (work, transport, leisure) and time spent in sedentary entertainment (TV/DVD, computer and other screen-based activities, non-screen-based activities) on workdays and non-workdays, along with occupation type (ranging from mainly sitting to heavy manual work) and perceptions towards physical activity. Associations of each type of sedentary behaviour with occupation type and perceptions towards physical activity were analysed by day type in multiple linear regression analyses. On workdays, adults spent a mean (SD) of 4.17 (3.07) h/day in work sitting, 1.10 (1.69) h/day in transport sitting, 2.19 (1.62) h/day in leisure-time sitting, 1.53 (1.24) h/day viewing TV/DVDs, 2.19 (2.62) h/day on other screen time, and 0.97 (1.49) on non-screen time. On non-workdays, this was 0.85 (1.53) h/day in transport sitting, 3.19 (2.05) h/day in leisure-time sitting, 2.24 (1.76) h/day viewing TV/DVDs, 1.85 (1.74) h/day on other screen time, and 1.30 (1.35) on non-screen time. Time spent in sedentary behaviours differed by occupation type, with more sedentary behaviour outside of work (both sitting and entertainment time), in those with sedentary occupations, especially on workdays. Negative perceptions towards physical activity were associated with more sedentary behaviour outside of work (both sitting and entertainment time), irrespective of day type. A substantial amount of

  12. On Meanings and Descriptions

    Directory of Open Access Journals (Sweden)

    Mieke Bal

    1981-09-01

    Full Text Available Although descriptive passages would appear to be of marginal importance in narrative texts, they are, in fact, of both logical and semantic necessity. Narratology, therefore, must take these segments into account. In this article, I shall survey the present situation in this field and compare rival points of view. I shall also offer several suggestions for analyzing descriptions. The following topics will be discussed: the nature of description as a specific type of discourse which makes it recognizable as such; the internal structure of description; the place and function of descriptions in the text as a whole. In the latter section, the semantic impact of descriptions in the overall meaning of narrative texts will be accounted for. This article is intended as a contribution to the theory of description as a part of narratology. It also has a didactic purpose, since it proposes a model for the analysis of texts which can be used for systematic text-study, both in a historical and a comparative perspective.

  13. Focal cortical thinning in patients with stable relapsing-remitting multiple sclerosis. Cross-sectional-based novel estimation of gray matter kinetics

    International Nuclear Information System (INIS)

    Orbach, Lior; Menascu, Shay; Hoffmann, Chen; Achiron, Anat; Miron, Shmuel

    2018-01-01

    The aim of our study is to identify radiological patterns of cortical gray matter atrophy (CGMA) that correlate with disease duration in patients with relapsing-remitting multiple sclerosis (RRMS). RRMS patients were randomly selected from the Sheba Multiple Sclerosis (MS) center computerized data registry based on stratification of disease duration up to 10 years. Patients were scanned by 3.0 T (Signa, GE) MRI, using a T1 weighted 3D high resolution, FSPGR, MS protocol. Neurological disability was assessed by the Expanded Disability Status Scale (EDSS). FreeSurfer was used to obtain brain volumetric segmentation and to perform cortical thickness surface-based analysis. Clusters of change in cortical thickness with correlation to disease duration were produced. Two hundred seventy-one RRMS patients, mean ± SD age 33.0 ± 7.0 years, EDSS 1.6 ± 1.2, disease duration 5.0 ± 3.4 years. Cortical thickness analysis demonstrated focal areas of cerebral thinning that correlated with disease duration. Seven clusters accounting for 11.7% of the left hemisphere surface and eight clusters accounting for 10.6% of the right hemisphere surface were identified, with cluster-wise probability of p < 0.002 and p < 0.02, respectively.The clusters included bilateral involvement of areas within the cingulate, precentral, postcentral, paracentral, superior-parietal, superior-frontal gyri and insular cortex. Mean and cluster-wise cortical thickness negatively correlated with EDSS score, p < 0.001, with stronger Spearman rho for cluster-wise measurements. We identified CGMA patterns in sensitive brain regions which give insight and better understanding of the progression of cortical gray matter loss in relation to dissemination in space and time. These patterns may serve as markers to modulate therapeutic interventions to improve the management of MS patients. (orig.)

  14. Thin-section computed tomography–histopathologic comparisons of pulmonary focal interstitial fibrosis, atypical adenomatous hyperplasia, adenocarcinoma in situ, and minimally invasive adenocarcinoma with pure ground-glass opacity

    Energy Technology Data Exchange (ETDEWEB)

    Si, Ming-Jue, E-mail: smjsh@hotmail.com [Department of Radiology, Shanghai Ninth People’s Hospital, Shanghai Jiao Tong University School of Medicine, No. 280, Mohe Road, Shanghai 201999 (China); Tao, Xiao-Feng, E-mail: taoxiaofeng1963@hotmail.com [Department of Radiology, Shanghai Ninth People’s Hospital, Shanghai Jiao Tong University School of Medicine, No. 280, Mohe Road, Shanghai 201999 (China); Du, Guang-Ye, E-mail: 715376158@qq.com [Department of Pathology, Shanghai Ninth People’s Hospital, Shanghai Jiao Tong University School of Medicine, No. 280, Mohe Road, Shanghai 201999 (China); Cai, Ling-Ling, E-mail: caill_00@163.com [Department of Radiology, Shanghai Ninth People’s Hospital, Shanghai Jiao Tong University School of Medicine, No. 280, Mohe Road, Shanghai 201999 (China); Han, Hong-Xiu, E-mail: hanhongxiu@hotmail.com [Department of Pathology, Shanghai Ninth People’s Hospital, Shanghai Jiao Tong University School of Medicine, No. 280, Mohe Road, Shanghai 201999 (China); Liang, Xi-Zi, E-mail: liangxizish@hotmail.com [Department of Pathology, Shanghai Ninth People’s Hospital, Shanghai Jiao Tong University School of Medicine, No. 280, Mohe Road, Shanghai 201999 (China); Zhao, Jiang-Min, E-mail: zhaojiangmin1962@hotmail.com [Department of Radiology, Shanghai Ninth People’s Hospital, Shanghai Jiao Tong University School of Medicine, No. 280, Mohe Road, Shanghai 201999 (China)

    2016-10-15

    Objective: To retrospectively compare focal interstitial fibrosis (FIF), atypical adenomatous hyperplasia (AAH), adenocarcinoma in situ (AIS), and minimally invasive adenocarcinoma (MIA) with pure ground-glass opacity (GGO) using thin-section computed tomography (CT). Materials and methods: Sixty pathologically confirmed cases were reviewed including 7 cases of FIF, 17 of AAH, 23of AIS, and 13 of MIA. All nodules kept pure ground glass appearances before surgical resection and their last time of thin-section CT imaging data before operation were collected. Differences of patient demographics and CT features were compared among these four types of lesions. Results: FIF occurred more frequently in males and smokers while the others occurred more frequently in female nonsmokers. Nodule size was significant larger in MIA (P < 0.001, cut-off value = 7.5 mm). Nodule shape (P = 0.045), margin characteristics (P < 0.001), the presence of pleural indentation (P = 0.032), and vascular ingress (P < 0.001) were significant factors that differentiated the 4 groups. A concave margin was only demonstrated in a high proportion of FIF at 85.7% (P = 0.002). There were no significant differences (all P > 0.05) in age, malignant history, attenuation value, location, and presence of bubble-like lucency. Conclusion: A nodule size >7.5 mm increases the possibility of MIA. A concave margin could be useful for differentiation of FIF from the other malignant or pre-malignant GGO nodules. The presence of spiculation or pleural indentation may preclude the diagnosis of AAH.

  15. The Effects of Magnetic-Field Geometry on Longitudinal Oscillations of Solar Prominences: Cross-Sectional Area Variation for Thin Tubes

    Science.gov (United States)

    Luna, M.; Diaz, A. J.; Oliver, R.; Terradas, J.; Karpen, J.

    2016-01-01

    Solar prominences are subject to both field-aligned (longitudinal) and transverse oscillatory motions, as evidenced by an increasing number of observations. Large-amplitude longitudinal motions provide valuable information on the geometry of the filament channel magnetic structure that supports the cool prominence plasma against gravity. Our pendulum model, in which the restoring force is the gravity projected along the dipped field lines of the magnetic structure, best explains these oscillations. However, several factors can influence the longitudinal oscillations, potentially invalidating the pendulum model. Aims. The aim of this work is to study the influence of large-scale variations in the magnetic field strength along the field lines, i.e., variations of the cross-sectional area along the flux tubes supporting prominence threads. Methods. We studied the normal modes of several flux tube configurations, using linear perturbation analysis, to assess the influence of different geometrical parameters on the oscillation properties. Results. We found that the influence of the symmetric and asymmetric expansion factors on longitudinal oscillations is small.Conclusions. We conclude that the longitudinal oscillations are not significantly influenced by variations of the cross-section of the flux tubes, validating the pendulum model in this context.

  16. Thin films and nanomaterials

    International Nuclear Information System (INIS)

    Jayakumar, S.; Kannan, M.D.; Prasanna, S.

    2012-01-01

    The objective of this book is to disseminate the most recent research in Thin Films, Nanomaterials, Corrosion and Metallurgy presented at the International Conference on Advanced Materials (ICAM 2011) held in PSG College of Technology, Coimbatore, India during 12-16 December 2011. The book is a compilation of 113 chapters written by active researchers providing information and critical insights into the recent advancements that have taken place. Important new applications are possible today in the fields of microelectronics, opto-electronics, metallurgy and energy by the application of thin films on solid surfaces. Recent progress in high vacuum technology and new materials has a remarkable effect in thin film quality and cost. This has led to the development of new single or multi-layered thin film devices with diverse applications in a multitude of production areas, such as optics, thermal barrier coatings and wear protections, enhancing service life of tools and to protect materials against thermal and atmospheric influence. On the other hand, thin film process techniques and research are strongly related to the basic research activities in nano technology, an increasingly important field with countless opportunities for applications due to the emergence of new properties at the nanoscale level. Materials and structures that are designed and fabricated at the nano scale level, offer the potential to produce new devices and processes that may enhance efficiencies and reduce costs in many areas, as photovoltaic systems, hydrogen storage, fuel cells and solar thermal systems. In the book, the contributed papers are classified under two sections i) thin films and ii) nanomaterials. The thin film section includes single or multi layer conducting, insulating or semiconducting films synthesized by a wide variety of physical or chemical techniques and characterized or analyzed for different applications. The nanomaterials section deals with novel or exciting materials

  17. Thin Places

    OpenAIRE

    Lockwood, Sandra Elizabeth

    2013-01-01

    This inquiry into the three great quests of the twentieth century–the South Pole, Mount Everest, and the Moon–examines our motivations to venture into these sublime, yet life-taking places. The Thin Place was once the destination of the religious pilgrim seeking transcendence in an extreme environment. In our age, the Thin Place quest has morphed into a challenge to evolve beyond the confines of our own physiology; through human ingenuity and invention, we reach places not meant to accommod...

  18. Thin book

    DEFF Research Database (Denmark)

    En lille bog om teater og organisationer, med bidrag fra 19 teoretikere og praktikere, der deltog i en "Thin Book Summit" i Danmark i 2005. Bogen bidrager med en state-of-the-art antologi om forskellige former for samarbejde imellem teater og organisationer. Bogen fokuserer både på muligheder og...

  19. Thin Film

    African Journals Online (AJOL)

    a

    organic substances. KEY WORDS: Photoelectrocatalysis, Titanium dioxide, Cuprous oxide, Composite thin film, Photo electrode. INTRODUCTION ... reddish p-type semiconductor with a direct band gap of 2.0-2.2 eV [18, 19]. ... Photoelectrocatalytic removal of color from water using TiO2 and TiO2/Cu2O electrodes. Bull.

  20. Automated mineralogy based on micro-energy-dispersive X-ray fluorescence microscopy (µ-EDXRF) applied to plutonic rock thin sections in comparison to a mineral liberation analyzer

    Science.gov (United States)

    Nikonow, Wilhelm; Rammlmair, Dieter

    2017-10-01

    Recent developments in the application of micro-energy-dispersive X-ray fluorescence spectrometry mapping (µ-EDXRF) have opened up new opportunities for fast geoscientific analyses. Acquiring spatially resolved spectral and chemical information non-destructively for large samples of up to 20 cm length provides valuable information for geoscientific interpretation. Using supervised classification of the spectral information, mineral distribution maps can be obtained. In this work, thin sections of plutonic rocks are analyzed by µ-EDXRF and classified using the supervised classification algorithm spectral angle mapper (SAM). Based on the mineral distribution maps, it is possible to obtain quantitative mineral information, i.e., to calculate the modal mineralogy, search and locate minerals of interest, and perform image analysis. The results are compared to automated mineralogy obtained from the mineral liberation analyzer (MLA) of a scanning electron microscope (SEM) and show good accordance, revealing variation resulting mostly from the limit of spatial resolution of the µ-EDXRF instrument. Taking into account the little time needed for sample preparation and measurement, this method seems suitable for fast sample overviews with valuable chemical, mineralogical and textural information. Additionally, it enables the researcher to make better and more targeted decisions for subsequent analyses.

  1. Effect of reconstruction algorithm on image quality and identification of ground-glass opacities and partly solid nodules on low-dose thin-section CT: Experimental study using chest phantom

    International Nuclear Information System (INIS)

    Koyama, Hisanobu; Ohno, Yoshiharu; Kono, Atsushi A.; Kusaka, Akiko; Konishi, Minoru; Yoshii, Masaru; Sugimura, Kazuro

    2010-01-01

    Purpose: The purpose of this study was to assess the influence of reconstruction algorithm on identification and image quality of ground-glass opacities (GGOs) and partly solid nodules on low-dose thin-section CT. Materials and methods: A chest CT phantom including simulated GGOs and partly solid nodules was scanned with five different tube currents and reconstructed by using standard (A) and newly developed (B) high-resolution reconstruction algorithms, followed by visually assessment of identification and image quality of GGOs and partly solid nodules by two chest radiologists. Inter-observer agreement, ROC analysis and ANOVA were performed to compare identification and image quality of each data set with those of the standard reference. The standard reference used 120 mA s in conjunction with reconstruction algorithm A. Results: Kappa values (κ) of overall identification and image qualities were substantial or almost perfect (0.60 < κ). Assessment of identification showed that area under the curve of 25 mA reconstructed with reconstruction algorithm A was significantly lower than that of standard reference (p < 0.05), while assessment of image quality indicated that 50 mA s reconstructed with reconstruction algorithm A and 25 mA s reconstructed with both reconstruction algorithms were significantly lower than standard reference (p < 0.05). Conclusion: Reconstruction algorithm may be an important factor for identification and image quality of ground-glass opacities and partly solid nodules on low-dose CT examination.

  2. A powerful tool for assessing distribution and fate of potentially toxic metals (PTMs) in soils: integration of laser ablation spectrometry (LA-ICP-MS) on thin sections with soil micromorphology and geochemistry.

    Science.gov (United States)

    Scarciglia, Fabio; Barca, Donatella

    2017-04-01

    The dynamic behavior and inherent spatial heterogeneity, at different hierarchic levels, of the soil system often make the spatial distribution of potentially toxic metals (PTMs) quite complex and difficult to assess correctly. This work demonstrates that the application of laser ablation spectrometry (LA-ICP-MS) to soil thin sections constitutes an ancillary powerful tool to well-established analytical methods for tracing the behavior and fate of potential soil contaminants at the microsite level. It allowed to discriminate the contribution of PTMs in distinct soil sub-components, such as parent rock fragments, neoformed, clay-enriched or humified matrix, and specific pedogenetic features of illuvial origin (unstained or iron-stained clay coatings) even at very low contents. PTMs were analyzed in three soil profiles located in the Muravera area (Sardinia, Italy), where several, now abandoned mines were exploited. Recurrent trends of increase of many PTMs from rock to pedogenic matrix and to illuvial clay coatings, traced by LA-ICP-MS compositional data, revealed a pedogenetic control on metal fractionation and distribution, based on adsorption properties of clay minerals, iron oxyhydroxides or organic matter, and downprofile illuviation processes. The main PTMs patterns coupled with SEM-EDS analyses suggest that heavy metal-bearing mineral grains were sourced from the mine plants, in addition to the natural sedimentary input. The interplay between soil-forming processes and geomorphic dynamics significantly contributed to the PTMs spatial distribution detected in the different pedogenetic horizons and soil features.

  3. Durability 2007. Injection grout investigations. Background description

    International Nuclear Information System (INIS)

    Orantie, K.; Kuosa, H.

    2008-12-01

    The aim of this project was to evaluate the durability risks of injection grouts. The investigations were done with respect to the application conditions, materials and service life requirements at the ONKALO underground research facility. The study encompassed injection grout mixtures made of ultrafine cement with and without silica fume. Some of the mixtures hade a low pH and thus a high silica fume content. The project includes a background description on durability literature, laboratory testing programme, detailed analysis of results and recommendations for selecting of ideal grout mixtures. The background description was made for the experimental study of low-pH and reference rock injection grouts as regards pore- and microstructure, strength, shrinkage/swelling and thus versatile durability properties. A summary of test methods is presented as well as examples, i.e. literature information or former test results, of expected range of results from the tests. Also background information about how the test results correlate to other material properties and mix designs is presented. Besides the report provides basic information on the pore structure of cement based materials. Also the correlation between the pore structure of cement based materials and permeability is shortly discussed. The test methods included in the background description are compressive strength, measurement of bulk drying, autogenous and chemical shrinkage and swelling, hydraulic conductivity / permeability, capillary water uptake test, mercury intrusion porosimetry (MIP) and thin section analysis. Three main mixtures with water-binder ratio of 0.8, 1.0 and 1.4 and silica fume content of 0, 15 and 40% were studied in the laboratory. Besides two extra mixtures were studied to provide additional information about the effect of varying water-dry-material ratio and silica fume content on durability. The evaluation of water tightness based on water permeability coefficient and micro cracking was

  4. Thin melanoma.

    Science.gov (United States)

    Elder, David E

    2011-03-01

    The incidence of malignant melanoma is increasing and a preponderance of the melanomas diagnosed today are "thin in terms of Breslow criteria. Although thin melanomas, as a group, are associated with a very good prognosis, a subset of these tumors may metastasize and cause death. These cases can be identified by using prognostic models, including the "standard" American Joint Committee on Cancer criteria, and other attributes identified in follow-up studies. To review the history of concepts of prognostic modeling in melanoma, focusing on thin melanomas. Selected literature. About 40 years ago, it was realized that malignant melanoma, once almost uniformly fatal, could be divided into categories with better or worse prognosis through the use of prognostic models. The first simple models, Clark levels of invasion and Breslow thickness, are still in use. Thickness remains the single most useful variable. Breslow recognized that melanomas less than 0.76 mm in thickness were associated with a very good prognosis, with no metastases in his limited initial study. The American Joint Committee on Cancer selected a cutoff of 1.0 mm, which achieves a similar result, with stage modifiers, although some metastases and deaths do occur with stage I lesions. Clark demonstrated an almost equally good prognosis for his level II invasive melanomas and recognized that most of these lesions, although invasive, lacked the ability to form tumors or to undergo mitosis in the dermis and were therefore "nontumorigenic" and "nonmitogenic" and lacked competence for metastasis. Studies of these low-risk melanomas have led to the development of criteria for earlier diagnosis and a steady, but still inadequate, improvement in prognosis for melanoma overall. Multivariable models currently can identify groups of patients within the "thin melanoma" category whose prognosis varies, from a disease-free survival of close to 100% to about 70%. Prognosis declines more or less linearly with increasing

  5. thin films

    Indian Academy of Sciences (India)

    The anionic precursor was 1% H2O2 solution. Both the cationic and anionic precursors were kept at room temperature (∼300 K). One SILAR cycle consists of two steps: (i) adsorption of Sn4+ ions on the substrate surface for 20 s and (ii) reaction with H2O2 solution for 40 s to form stable SnO2:H2O thin film on the substrate.

  6. Too much detention? Street Triage and detentions under Section 136 Mental Health Act in the North-East of England: a descriptive study of the effects of a Street Triage intervention

    Science.gov (United States)

    Keown, Patrick; French, Jo; Gibson, Graham; Newton, Eddy; Cull, Steve; Brown, Paul; Parry, Jo; Lyons, Diana

    2016-01-01

    Objectives To describe the impact of Street Triage (ST) on the number and rate of Section 136 Mental Health Act (S136) detentions in one NHS Mental Health and Disability Trust (Northumberland, Tyne and Wear (NTW)). Design Comparative descriptive study of numbers and rates of S136 detentions prior to and following the introduction of ST in NTW. More detailed data were obtained from one local authority in the NTW area. Setting NTW, a secondary care NHS Foundation Trust providing mental health and disability services in the north-east of England, in conjunction with Northumbria Police Service. Participants People being detained under S136 Mental Health Act (MHA). Routine data on S136 detentions and ST interventions were obtained from NTW, Northumbria Police, Sunderland Hospitals NHS Foundation Trust and Sunderland Local Authority. Interventions Introduction of a ST service in NTW. The main outcome measures were routinely collected data on the number and rate of ST interventions as well as patterns of the numbers and rates of S136 detentions. These were collected retrospectively. Results The annual rate of S136 detentions reduced by 56% in the first year of ST (from 59.8 per 100 000 population to 26.4 per 100 000). There was a linear relationship between the rate of ST in each locality and the reduction in rate of S136 detentions. There were 1623 ST contacts in the first 3 localities to have a ST service during its first year; there were also 403 fewer S136 detentions. Data from Sunderland indicate a 78% reduction in S136 use and a significant reduction in the number and proportion of adult admissions that originated from S136 detentions. Conclusions There is evidence to support the hypothesis that ST decreases the rate of s136 detention. When operating across the whole of NTW, ST resulted in 50 fewer S136 detentions a month, which represents a substantial reduction. PMID:27872112

  7. Factors affecting adherence to appointment system in the clinic for non-communicable diseases in UNRWA's Khan Younis Health Centre and the role of mobile phone text messages to improve adherence: a descriptive cross-sectional study.

    Science.gov (United States)

    Al Najjar, Sanaa; Al Shaer, Tamer

    2018-02-21

    To meet the emerging needs of the increasing numbers of patients with non-communicable diseases and to provide optimum care with optimum contact time and minimum waiting time, as stated in UNRWA guidelines, the mobile phone text messaging system was implemented in UNRWA centres to remind patients of upcoming appointments and to thereby improve the quality of care for vulnerable patients and regulate the work load in the clinics for non-communicable diseases. The aim of this study was to assess the causes for lack of adherence to the appointment system at UNRWA centres. This descriptive cross-sectional study was done in the UNRWA's Khan Younis Health Centre (KYHC), which serves the same refugee population as other UNRWA health centres and follows the same guidelines with minimal variation. Data were collected through interviewer-administered questionnaires, with ten medical staff members involved in the appointment process and 50 patients with non-communicable diseases selected randomly from patients attending the KYHC. The text-message reminder intervention targeted 1000 patients with non-communicable diseases and consisted of an electronic message technique that was developed to remind patients about the day and time of upcoming appointments. Administrative approval was obtained from the chief of UNRWA health programme. Verbal consent was obtained from participants. We followed the Modified International Code of Ethics Principles (1975), known as the Declaration of Helsinki. The main barrier to adherence to appointments in the clinic for non-communicable diseases was forgetting the appointment. Other factors were lack of awareness, clinic overcrowding, appointments that do not match the patient's preference, availability of other service providers, and financial issues. In March, 2016, after the completion of the intervention, the proportion of patients that adhered to their appointment by date and time was 76%, compared with about 45% in January and February

  8. Failure of hospital employees to comply with smoke-free policy is associated with nicotine dependence and motives for smoking: a descriptive cross-sectional study at a teaching hospital in the United Kingdom

    Directory of Open Access Journals (Sweden)

    Turner Kenrick

    2009-07-01

    Full Text Available Abstract Background Smoke-free policy aims to protect the health of the population by reducing exposure to environmental tobacco smoke (ETS, and World Health Organisation (WHO guidance notes that these policies are only successful if there is full and proper enforcement. We aimed to investigate the problem of resistance to smoking restrictions and specifically compliance with smoke-free policy. We hypothesised that an explanation for non-compliance would lie in a measurable difference between the smoking behaviours of compliant and non-compliant smokers, specifically that non-compliance would be associated with nicotine dependence and different reasons for smoking. Methods We conducted a questionnaire-based, descriptive, cross-sectional study of hospital employees. Seven hundred and four members of staff at Addenbrooke's Hospital, Cambridge, UK, completed the questionnaire, of whom 101 were smokers. Comparison between compliant and non-compliant smokers was made based on calculated scores for the Fagerström test and the Horn-Waingrow scale, and level of agreement with questions about attitudes. For ordinal data we used a linear-by-linear association test. For non-parametric independent variables we used the Mann-Whitney test and for associations between categorical variables we used the chi-squared test. Results The demographic composition of respondents corresponded with the hospital's working population in gender, age, job profile and ethnicity. Sixty nine smokers reported they were compliant while 32 were non-compliant. Linear-by-linear association analysis of the compliant and non-compliant smokers' answers for the Fagerström test suggests association between compliance and nicotine dependence (p = 0.049. Mann-Whitney test analysis suggests there is a statistically significant difference between the reasons for smoking of the two groups: specifically that non-compliant smokers showed habitual smoking behaviour (p = 0.003. Overall

  9. Polycrystalline thin films : A review

    Energy Technology Data Exchange (ETDEWEB)

    Valvoda, V. [Charles Univ., Prague (Czech Republic). Faculty of Mathematics and Physics

    1996-09-01

    Polycrystalline thin films can be described in terms of grain morphology and in terms of their packing by the Thornton`s zone model as a function of temperature of deposition and as a function of energy of deposited atoms. Grain size and preferred grain orientation (texture) can be determined by X-ray diffraction (XRD) methods. A review of XRD analytical methods of texture analysis is given with main attention paid to simple empirical functions used for texture description and for structure analysis by joint texture refinement. To illustrate the methods of detailed structure analysis of thin polycrystalline films, examples of multilayers are used with the aim to show experiments and data evaluation to determine layer thickness, periodicity, interface roughness, lattice spacing, strain and the size of diffraction coherent volumes. The methods of low angle and high angle XRD are described and discussed with respect to their complementary information content.

  10. Implementing a Description Grammar Interpreter : A Notation for Descriptions and Description Rules

    NARCIS (Netherlands)

    Stouffs, R.M.F.

    2015-01-01

    Description grammars represent a formalism for generating verbal descriptions of designs, used in conjunction with shape grammars. A description grammar constitutes a set of description rules that define a language of descriptions. A description grammar interpreter implements the mechanisms to

  11. An investigation of fatigue in LIGA Ni MEMS thin films

    International Nuclear Information System (INIS)

    Allameh, S.M.; Lou, J.; Kavishe, F.; Buchheit, T.; Soboyejo, W.O.

    2004-01-01

    This paper presents results of an experimental study of fatigue in LIGA Ni micro-electro-mechanical systems (MEMS)/thin films produced by electroplating from a sulfamate bath at a current density of 50 mA/cm 2 . Following a brief description of microstructure and micro-tensile properties, the results of stress-life (S-N) experiments are presented for specimens with thicknesses of 70 and 270 μm. Specimens with the thicker cross-sections (270 μm thick) are shown to have comparable fatigue resistance to annealed bulk Ni in the as-plated condition. The thinner specimens (70 μm thick) have comparable fatigue resistance to hardened Ni, and better fatigue resistance than the thicker samples. The underlying fatigue fracture modes are elucidated via scanning electron microscopy. The implications of the results are then discussed for the failure analysis of LIGA Ni MEMS structures

  12. A quantitative assessment of repeatability in the petrographic description of carbonate sediments

    Science.gov (United States)

    Junaibi, Mariam Al; Lokier, Stephen

    2014-05-01

    The Dunham classification, as modified by Embry and Klovan, is the most widely-applied classification scheme for the systematic description of carbonate sedimentary rocks. Yet, despite the fact that the divisions of this scheme are so clearly defined and well-established, ambiguities in the petrographic description of thin sections still occur. Many petroleum reservoir modelling systems employ rock-typing schemes heavily biased to the allocation of a rock unit to a specific category within the Dunham classification scheme. Consistency in application of the scheme is therefore imperative. This study investigates the consistency of use of the Dunham classification across academia and industry to assess reproducibility in the petrographic description of carbonate sediments. In order to control the petrographic parameters of the lithologies used in this study, we created a range of synthetic carbonate thin sections with known component ratios and a range of sedimentary textures spanning the Dunham classification scheme. Some of these textures were deliberately deigned to be ambiguous in nature. All samples were subjected to modal analysis in order to accurately constrain component ratios and sedimentary textures. Identical sets of blind-labelled samples were dispatched to volunteers in academia and industry. Volunteers were asked to describe the samples within the terms of the Dunham classification scheme and complete a questionnaire detailing their current employment position and academic background. The results of the completed surveys were tabulated and analysed in order to assess consistency and reproducibility in the petrographic description of carbonate rocks. Ambiguities were documented and analysed in order to constrain areas of uncertainty in the application of the Dunham classification. Based upon the findings of these data, clarifications to the Dunham classification scheme are proposed.

  13. Description of spatio-temporal gait parameters in elderly people and their association with history of falls: results of the population-based cross-sectional KORA-Age study.

    Science.gov (United States)

    Thaler-Kall, Kathrin; Peters, Annette; Thorand, Barbara; Grill, Eva; Autenrieth, Christine S; Horsch, Alexander; Meisinger, Christa

    2015-03-25

    In this epidemiological study we described the characteristics of spatio-temporal gait parameters among a representative, population-based sample of 890 community-dwelling people aged 65 to 90 years. In addition, we investigated the associations between certain gait parameters and a history of falls in study participants. In descriptive analyses spatio-temporal gait parameters were assessed according to history of falls, frailty, multimorbidity, gender, multiple medication use, disability status, and age group. Logistic regression models were calculated to examine the association between gait velocity and stride length with a history of falls (at least one fall in the last 12 month). Data on gait were collected on an electronic walkway on which participants walked at their usual pace. We found significant differences within gait parameters when stratifying by frailty, multimorbidity, disability and multiple medication use as well as age (cut point 75 years) and sex, with p gait parameters (velocity, cadence, time, stride duration, stride length, step width). After stratification by history of falls, only stride length showed a significant difference (p gait parameters measured during gait assessment on an electronic walkway in elderly people. Furthermore, stride length is a good indicator to differentiate fallers from non-fallers in older men from the general population.

  14. Thin film processes II

    CERN Document Server

    Kern, Werner

    1991-01-01

    This sequel to the 1978 classic, Thin Film Processes, gives a clear, practical exposition of important thin film deposition and etching processes that have not yet been adequately reviewed. It discusses selected processes in tutorial overviews with implementation guide lines and an introduction to the literature. Though edited to stand alone, when taken together, Thin Film Processes II and its predecessor present a thorough grounding in modern thin film techniques.Key Features* Provides an all-new sequel to the 1978 classic, Thin Film Processes* Introduces new topics, and sever

  15. Reversible gates and circuits descriptions

    Science.gov (United States)

    Gracki, Krzystof

    2017-08-01

    This paper presents basic methods of reversible circuit description. To design reversible circuit a set of gates has to be chosen. Most popular libraries are composed of three types of gates so called CNT gates (Control, NOT and Toffoli). The gate indexing method presented in this paper is based on the CNT gates set. It introduces a uniform indexing of the gates used during synthesis process of reversible circuits. The paper is organized as follows. Section 1 recalls basic concepts of reversible logic. In Section 2 and 3 a graphical representation of the reversible gates and circuits is described. Section 4 describes proposed uniform NCT gates indexing. The presented gate indexing method provides gate numbering scheme independent of lines number of the designed circuit. The solution for a circuit consisting of smaller number of lines is a subset of solution for a larger circuit.

  16. 22 CFR 1203.735-406 - Submission of position description.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 2 2010-04-01 2010-04-01 true Submission of position description. 1203.735-406 Section 1203.735-406 Foreign Relations UNITED STATES INTERNATIONAL DEVELOPMENT COOPERATION AGENCY EMPLOYEE... accompanied by a full description of the employee's principal governmental duties. The description should be...

  17. 47 CFR 79.3 - Video description of video programming.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Video description of video programming. 79.3... CLOSED CAPTIONING AND VIDEO DESCRIPTION OF VIDEO PROGRAMMING § 79.3 Video description of video programming. (a) Definitions. For purposes of this section the following definitions shall apply: (1...

  18. A non-randomized confirmatory trial of segmentectomy for clinical T1N0 lung cancer with dominant ground glass opacity based on thin-section computed tomography (JCOG1211).

    Science.gov (United States)

    Aokage, Keiju; Saji, Hisashi; Suzuki, Kenji; Mizutani, Tomonori; Katayama, Hiroshi; Shibata, Taro; Watanabe, Syunichi; Asamura, Hisao

    2017-05-01

    Lobectomy has been the standard surgery for even stage I lung cancer since the validity of limited resection for stage I lung cancer was denied by the randomized study reported in 1995. The aim of this non-randomized confirmatory going on since September 2013 is to confirm the efficacy of a segmentectomy for clinical T1N0 lung cancer with dominant ground glass opacity based on thin-slice computed tomography. A total of 390 patients from 42 Japanese institutions are recruited within 4 years. The primary endpoint of this study is a 5-year relapse-free survival in all of the patients who undergo a segmentectomy for a lung nodule. The secondary endpoints are overall survival, annual relapse-free survival, disease-free survival, proportion of local relapse, postoperative pulmonary function, proportion of segmentectomy completion, proportion of R0 resection completion by segmentectomy, adverse events, and serious adverse events. This trial has been registered at the UMIN Clinical Trials Registry as UMIN000011819 ( http://www.umin.ac.jp/ctr/ ). Patient's accrual has been already finished in November, 2015 and the primary analysis will be performed in 2021. This study is one of the pivotal trial of lung segmentectomy for early lung cancer. The result will provide a clear evidence for our daily clinics and will be possible contribution to preserving pulmonary function for lung cancer patients.

  19. Failure mechanisms in thin electroactive polymer actuators

    OpenAIRE

    De Tommasi, D.; Puglisi, G.; Saccomandi, G.; Zurlo, G.

    2010-01-01

    We propose a model to analyze the insurgence of pull-in and wrinkling failures in electroactive thin films. We take in consideration both cases of voltage and charge control, and study the role of prestretch and size of activated regions, which are essential in the analysis of realistic applications of EAPs. Based on simple geometrical and material assumptions we deduce an explicit analytical description of these phenomena, allowing a clear physical interpretation. Despite our simplifying ass...

  20. Thin Film Processes

    CERN Document Server

    Vossen, John L.

    1991-01-01

    This sequel to the 1978 classic, Thin Film Processes, gives a clear, practical exposition of important thin film deposition and etching processes that have not yet been adequately reviewed. It discusses selected processes in tutorial overviews with implementation guide lines and an introduction to the literature. Though edited to stand alone, when taken together, Thin Film Processes II and its predecessor present a thorough grounding in modern thin film techniques. Key Features * Provides an all-new sequel to the 1978 classic, Thin Film Processes * Introduces new topics, and several key topics presented in the original volume are updated * Emphasizes practical applications of major thin film deposition and etching processes * Helps readers find the appropriate technology for a particular application

  1. Description logics of context

    CSIR Research Space (South Africa)

    Klarman, S

    2013-05-01

    Full Text Available We introduce Description Logics of Context (DLCs) - an extension of Description Logics (DLs) for context-based reasoning. Our approach descends from J. McCarthy's tradition of treating contexts as formal objects over which one can quantify...

  2. Physics 3204. Course Description.

    Science.gov (United States)

    Newfoundland and Labrador Dept. of Education.

    A description of the physics 3204 course in Newfoundland and Labrador is provided. The description includes: (1) statement of purpose, including general objectives of science education; (2) a list of six course objectives; (3) course content for units on sound, light, optical instruments, electrostatics, current electricity, Michael Faraday and…

  3. Descriptive set theory

    CERN Document Server

    Moschovakis, YN

    1987-01-01

    Now available in paperback, this monograph is a self-contained exposition of the main results and methods of descriptive set theory. It develops all the necessary background material from logic and recursion theory, and treats both classical descriptive set theory and the effective theory developed by logicians.

  4. Dietary assessment of British police force employees: a description of diet record coding procedures and cross-sectional evaluation of dietary energy intake reporting (The Airwave Health Monitoring Study).

    Science.gov (United States)

    Gibson, Rachel; Eriksen, Rebeca; Lamb, Kathryn; McMeel, Yvonne; Vergnaud, Anne-Claire; Spear, Jeanette; Aresu, Maria; Chan, Queenie; Elliott, Paul; Frost, Gary

    2017-04-04

    Dietary intake is a key aspect of occupational health. To capture the characteristics of dietary behaviour that is affected by occupational environment that may affect disease risk, a collection of prospective multiday dietary records is required. The aims of this paper are to: (1) collect multiday dietary data in the Airwave Health Monitoring Study, (2) describe the dietary coding procedures applied and (3) investigate the plausibility of dietary reporting in this occupational cohort. A dietary coding protocol for this large-scale study was developed to minimise coding error rate. Participants (n 4412) who completed 7-day food records were included for cross-sectional analyses. Energy intake (EI) misreporting was estimated using the Goldberg method. Multivariate logistic regression models were applied to determine participant characteristics associated with EI misreporting. British police force employees enrolled (2007-2012) into the Airwave Health Monitoring Study. The mean code error rate per food diary was 3.7% (SD 3.2%). The strongest predictors of EI under-reporting were body mass index (BMI) and physical activity. Compared with participants with BMI30 kg/m 2 had increased odds of being classified as under-reporting EI (men OR 5.20 95% CI 3.92 to 6.89; women OR 2.66 95% CI 1.85 to 3.83). Men and women in the highest physical activity category compared with the lowest were also more likely to be classified as under-reporting (men OR 3.33 95% CI 2.46 to 4.50; women OR 4.34 95% CI 2.91 to 6.55). A reproducible dietary record coding procedure has been developed to minimise coding error in complex 7-day diet diaries. The prevalence of EI under-reporting is comparable with existing national UK cohorts and, in agreement with previous studies, classification of under-reporting was biased towards specific subgroups of participants. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  5. Personality: Description, Classification and Evaluation

    Directory of Open Access Journals (Sweden)

    Ibrahim Taymur

    2012-06-01

    Full Text Available Many descriptions and classifications of personality have been made to understand and acknowledge human being through out the history. During the developmental process of psychiatry, almost every school defined and assessed personality regarding to their own perspective. As DSM (Diagnostical and Statistical Manual of Mental Disorders and ICD (International Classification of Diseases being available to common usage, scientists conducted studies to set a common terminology for personality. Categorical and dimensional approaches are the most fundamentally different assessment strategies in the research and clinical aspects about personality. While categorical approach views the personality as dichotomies which consists of different groups, dimensional approach aims to describe the personality on the basis of dimensions, thus suggests that the personality is a structure formed by definite dimensions. Several advantages and disadvantages can be noticed when descriptions of personality and tools for the evaluation of personality are reviewed. When the section making suggestions about personality disorder in DSM-5 is evaluated, it is seen that it aims to restructure the personality disorder diagnostic group according to new findings and critiques. In this article, the description of personality throughout the history, dimensional, categorical and cognitive approaches to personality, the features of the tools that are used to assess and measure the personality are reviewed.

  6. Thin films on cantilevers

    NARCIS (Netherlands)

    Nazeer, H.

    2012-01-01

    The main goal of the work compiled in this thesis is to investigate thin films for integration in micro electromechanical systems (MEMS). The miniaturization of MEMS actuators and sensors without compromising their performance requires thin films of different active materials with specific

  7. Optical thin film devices

    Science.gov (United States)

    Mao, Shuzheng

    1991-11-01

    Thin film devices are applied to almost all modern scientific instruments, and these devices, especially optical thin film devices, play an essential role in the performances of the instruments, therefore, they are attracting more and more attention. Now there are numerous kinds of thin film devices and their applications are very diversified. The 300-page book, 'Thin Film Device and Applications,' by Prof. K. L. Chopra gives some general ideas, and my paper also outlines the designs, fabrication, and applications of some optical thin film devices made in my laboratory. Optical thin film devices have been greatly developed in the recent decades. Prof. A. Thelan has given a number of papers on the theory and techniques, Prof. H. A. Macleod's book, 'Thin Film Optical Filters,' has concisely concluded the important concepts of optical thin film devices, and Prof. J. A. Dobrowobski has proposed many successful designs for optical thin film devices. Recently, fully-automatic plants make it easier to produce thin film devices with various spectrum requirements, and some companies, such as Balzers, Leybold AG, Satis Vacuum AG, etc., have manufactured such kinds of coating plants for research or mass-production, and the successful example is the production of multilayer antireflection coatings with high stability and reproducibility. Therefore, it could be said that the design of optical thin film devices and coating plants is quite mature. However, we cannot expect that every problem has been solved, the R&D work still continues, the competition still continues, and new design concepts, new techniques, and new film materials are continually developed. Meanwhile, the high-price of fully-automatic coating plants makes unpopular, and automatic design of coating stacks is only the technique for optimizing the manual design according to the physical concepts and experience, in addition, not only the optical system, but also working environment should be taken into account when

  8. Bibliography section

    International Nuclear Information System (INIS)

    Anon.

    1976-01-01

    This bibliography contains 2180 references. They are arranged according to the following subjects: gas chromatography, column chromatography, paper chromatography, thin-layer chromatography, and electrophoretic techniques. Each subject is in principle divided into 36 categories. The following category falls within the INIS scope: radioactive and other isotope compounds. For the above mentioned subjects there are 21 references in this category. Other categories that might be partially in scope are: reviews and books; fundamentals, theory and general; techniques; pollution

  9. Museum audio description

    OpenAIRE

    Martins, Cláudia Susana Nunes

    2011-01-01

    Audio description for the blind and visually impaired has been around since people have described what is seen. Throughout time, it has evolved and developed within different media, starting with reality and daily life, moving into the cinema and television, then across other performing arts, museums and art galleries, and public places. Thus, academics and entertainment providers have developed a growing interest for audio description, especially in what concerns the best methods and strateg...

  10. Distortional Modes of Thin-Walled Beams

    DEFF Research Database (Denmark)

    Jönsson, Jeppe; Andreassen, Michael Joachim

    2009-01-01

    The classic thin-walled beam theory for open and closed cross-sections can be generalized by including distortional displacement modes. The introduction of additional displacement modes leads to coupled differential equations, which seems to have prohibited the use of exact shape functions in the...

  11. Cesarean Section

    Science.gov (United States)

    A Cesarean section (C-section) is surgery to deliver a baby. The baby is taken out through the mother's ... are able to have a vaginal birth after cesarean (VBAC). NIH: National Institute of Child Health and ...

  12. The torsion of the multicell sections

    Directory of Open Access Journals (Sweden)

    Marcel STERE

    2010-09-01

    Full Text Available The paper is focused on the stress analysis of thin-walled multicell sections subjected to pure torsion. The shear flow and stiffness characteristics of the cross section for torsion are given. Example: aircraft wing section. The theory for thin-walled closed sections used in this paper was developed by Bredt [3]. The shear flows obtained are used in the design of skins and interior webs, ribs and fasteners at skin splices, skin web junctions and the joints where the ribs meet the skin or webs.

  13. Thin Film & Deposition Systems (Windows)

    Data.gov (United States)

    Federal Laboratory Consortium — Coating Lab: Contains chambers for growing thin film window coatings. Plasma Applications Coating Lab: Contains chambers for growing thin film window coatings. Solar...

  14. A descriptive cross-sectional survey of prevalence, knowledge and ...

    African Journals Online (AJOL)

    Acne vulgaris is a pilosebaceous gland disorder affecting mostly teenagers. Most Nigerian youths attend secondary schools during the teen-age period yet information on the prevalence, knowledge and perceptions of acne vulgaris among them is scanty. The present study was designed to evaluate the prevalence, ...

  15. A cross-sectional descriptive study of breastfeeding behaviour and ...

    African Journals Online (AJOL)

    Background. Failure to exclusively breastfeed is often caused by a perception of insufficient breastmilk supply. Galactogogues are frequently prescribed in these circumstances, but this is supported by sparse scientific data with safety concerns for both mother and infant. The exact extent of galactogogue use in South Africa ...

  16. Strength Tests of Thin-Walled Duralumin Cylinders in Compression

    Science.gov (United States)

    Lundquist, Eugene E

    1934-01-01

    This report is the second of a series presenting the results of strength tests of thin-walled duralumin cylinders and truncated cones of circular and elliptic section. It contains the results obtained from compression tests on 45 thin-walled duralumin cylinders of circular section with ends clamped to rigid bulkheads. In addition to the tests on duralumin cylinders, there are included the results of numerous tests on rubber, celluloid, steel, and brass cylinders obtained from various sources.

  17. Thin film hydrogen sensor

    Science.gov (United States)

    Cheng, Yang-Tse; Poli, Andrea A.; Meltser, Mark Alexander

    1999-01-01

    A thin film hydrogen sensor, includes: a substantially flat ceramic substrate with first and second planar sides and a first substrate end opposite a second substrate end; a thin film temperature responsive resistor on the first planar side of the substrate proximate to the first substrate end; a thin film hydrogen responsive metal resistor on the first planar side of the substrate proximate to the fist substrate end and proximate to the temperature responsive resistor; and a heater on the second planar side of the substrate proximate to the first end.

  18. Reliability of semiology description.

    Science.gov (United States)

    Heo, Jae-Hyeok; Kim, Dong Wook; Lee, Seo-Young; Cho, Jinwhan; Lee, Sang-Kun; Nam, Hyunwoo

    2008-01-01

    Seizure semiology is important for classifying patients' epilepsy. Physicians usually get most of the seizure information from observers though there have been few reports on the reliability of the observers' description. This study aims at determining the reliability of observers' description of the semiology. We included 92 patients who had their habitual seizures recorded during video-EEG monitoring. We compared the semiology described by the observers with that recorded on the videotape, and reviewed which characteristics of the observers affected the reliability of their reported data. The classification of seizures and the individual components of the semiology based only on the observer-description was somewhat discordant compared with the findings from the videotape (correct classification, 85%). The descriptions of some ictal behaviors such as oroalimentary automatism, tonic/dystonic limb posturing, and head versions were relatively accurate, but those of motionless staring and hand automatism were less accurate. The specified directions by the observers were relatively correct. The accuracy of the description was related to the educational level of the observers. Much of the information described by well-educated observers is reliable. However, every physician should keep in mind the limitations of this information and use this information cautiously.

  19. 14 CFR 415.109 - Launch description.

    Science.gov (United States)

    2010-01-01

    ... trajectory information as part of the flight safety analysis data required by § 415.115. (1) One drawing must... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Launch description. 415.109 Section 415.109 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF...

  20. A DESCRIPTIVE INDONESIAN GRAMMAR--PRELIMINARY EDITION.

    Science.gov (United States)

    DYEN, ISIDORE

    THIS PRELIMINARY EDITION COMPRISES A DESCRIPTIVE GRAMMAR OF INDONESIAN (BAHASA INDONESIA), THE OFFICIAL LANGUAGE OF THE REPUBLIC OF INDONESIA. THE THREE SECTIONS--PHONOLOGY, SYNTAX, AND MORPHOLOGY--PRESENT A COMPREHENSIVE LINGUISTIC ANALYSIS OF INDONESIAN, WITH OCCASIONAL CONTRASTIVE REFERENCE TO MALAY, JAVANESE, SUNDANESE, AND SUMATRAN. THIS…

  1. 7 CFR 52.801 - Product description.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Product description. 52.801 Section 52.801 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946...

  2. Olkiluoto site description 2011

    International Nuclear Information System (INIS)

    2012-12-01

    This fourth version of the Olkiluoto Site Report, produced by the OMTF (Olkiluoto Modelling Task Force), updates the Olkiluoto Site Report 2008 with the data and knowledge obtained up to December 2010. A descriptive model of the site (the Site Descriptive Model, SDM), i.e. a model describing the geological and hydrogeological structure of the site, properties of the bedrock and the groundwater and its flow, and the associated interacting processes and mechanisms. The SDM is divided into six parts: surface system, geology, rock mechanics, hydrogeology, hydrogeochemistry and transport properties

  3. CRAC2 model description

    International Nuclear Information System (INIS)

    Ritchie, L.T.; Alpert, D.J.; Burke, R.P.; Johnson, J.D.; Ostmeyer, R.M.; Aldrich, D.C.; Blond, R.M.

    1984-03-01

    The CRAC2 computer code is a revised version of CRAC (Calculation of Reactor Accident Consequences) which was developed for the Reactor Safety Study. This document provides an overview of the CRAC2 code and a description of each of the models used. Significant improvements incorporated into CRAC2 include an improved weather sequence sampling technique, a new evacuation model, and new output capabilities. In addition, refinements have been made to the atmospheric transport and deposition model. Details of the modeling differences between CRAC2 and CRAC are emphasized in the model descriptions

  4. Olkiluoto site description 2011

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-12-15

    This fourth version of the Olkiluoto Site Report, produced by the OMTF (Olkiluoto Modelling Task Force), updates the Olkiluoto Site Report 2008 with the data and knowledge obtained up to December 2010. A descriptive model of the site (the Site Descriptive Model, SDM), i.e. a model describing the geological and hydrogeological structure of the site, properties of the bedrock and the groundwater and its flow, and the associated interacting processes and mechanisms. The SDM is divided into six parts: surface system, geology, rock mechanics, hydrogeology, hydrogeochemistry and transport properties.

  5. Thin film device applications

    CERN Document Server

    Kaur, Inderjeet

    1983-01-01

    Two-dimensional materials created ab initio by the process of condensation of atoms, molecules, or ions, called thin films, have unique properties significantly different from the corresponding bulk materials as a result of their physical dimensions, geometry, nonequilibrium microstructure, and metallurgy. Further, these characteristic features of thin films can be drasti­ cally modified and tailored to obtain the desired and required physical characteristics. These features form the basis of development of a host of extraordinary active and passive thin film device applications in the last two decades. On the one extreme, these applications are in the submicron dimensions in such areas as very large scale integration (VLSI), Josephson junction quantum interference devices, magnetic bubbles, and integrated optics. On the other extreme, large-area thin films are being used as selective coatings for solar thermal conversion, solar cells for photovoltaic conver­ sion, and protection and passivating layers. Ind...

  6. Thin Solid Oxide Cell

    DEFF Research Database (Denmark)

    2010-01-01

    The present invention relates to a thin and in principle unsupported solid oxide cell, comprising at least a porous anode layer, an electrolyte layer and a porous cathode layer, wherein the anode layer and the cathode layer comprise an electrolyte material, at least one metal and a catalyst...... material, and wherein the overall thickness of the thin reversible cell is about 150 [mu]m or less, and to a method for producing same. The present invention also relates to a thin and in principle unsupported solid oxide cell, comprising at least a porous anode layer, an electrolyte layer and a porous...... cathode layer, wherein the anode layer and the cathode layer comprise an electrolyte material and a catalyst material, wherein the electrolyte material is doper zirconia, and wherein the overall thickness of the thin reversible cell is about 150 [mu]m or less, and to a method for producing same...

  7. Thin epitaxial silicon detectors

    International Nuclear Information System (INIS)

    Stab, L.

    1989-01-01

    Manufacturing procedures of thin epitaxial surface barriers will be given. Some improvements have been obtained: larger areas, lower leakage currents and better resolutions. New planar epitaxial dE/dX detectors, made in a collaboration work with ENERTEC-INTERTECHNIQUE, and a new application of these thin planar diodes to EXAFS measurements, made in a collaboration work with LURE (CNRS,CEA,MEN) will also be reported

  8. Multifunctional thin film surface

    Energy Technology Data Exchange (ETDEWEB)

    Brozik, Susan M.; Harper, Jason C.; Polsky, Ronen; Wheeler, David R.; Arango, Dulce C.; Dirk, Shawn M.

    2015-10-13

    A thin film with multiple binding functionality can be prepared on an electrode surface via consecutive electroreduction of two or more aryl-onium salts with different functional groups. This versatile and simple method for forming multifunctional surfaces provides an effective means for immobilization of diverse molecules at close proximities. The multifunctional thin film has applications in bioelectronics, molecular electronics, clinical diagnostics, and chemical and biological sensing.

  9. Thinning 'Elstar' apple with benzyladenine

    NARCIS (Netherlands)

    Maas, F.M.

    2006-01-01

    ‘Elstar’, the main apple cultivar grown in the Netherlands, requires adequate thinning to reach marketable fruit sizes and to achieve regular yields by preventing alternate bearing. At the moment, chemical thinning of ‘Elstar’ is the only economically feasible way of thinning. Thinning by hand is

  10. Generalizing: The descriptive struggle

    Directory of Open Access Journals (Sweden)

    Barney G. Glaser, Ph.D.; Hon Ph.D.

    2006-11-01

    Full Text Available The literature is not kind to the use of descriptive generalizations. Authors struggle and struggle to find and rationalize a way to use them and then fail in spite of trying a myriad of work-arounds. And then we have Lincoln and Guba’s famous statement: “The only generalization is: there is no generalization” in referring to qualitative research. (op cit, p. 110 They are referring to routine QDA yielding extensive descriptions, but which tacitly include conceptual generalizations without any real thought of knowledge about them. In this chapter I wish to explore this struggle for the purpose of explaining that the various contra arguments to using descriptive generalizations DO NOT apply to the ease of using conceptual generalizations yielded in SGT and especially FGT. I will not argue for the use of descriptive generalization. I agree with Lincoln and Guba with respect to QDA, “the only generalization is: there is no generalization.” It is up to the QDA methodologists, of whom there are many; to continue the struggle and I wish them well.

  11. Tore Supra: technical description

    International Nuclear Information System (INIS)

    1985-08-01

    This report is aimed, after a brief recall of physics and technologic perspectives of Tore Supra, at giving a detailed description of the basic machine; details of each component are defined. Volume 1 is specifically concerned with the general aspects of Tore Supra and the toroidal field system [fr

  12. Systematic Description of Sensors

    NARCIS (Netherlands)

    Regtien, Paulus P.L.; Sydenham, Peter H.; Thorn, Richard

    A sensor performs the exchange of information (thus energy) from one domain to another and therefore it operates on the interface between different physical domains. Several frameworks have been developed for a systematic description of sensors. Basically, they are based on either of two different

  13. Fractal description of fractures

    International Nuclear Information System (INIS)

    Lung, C.W.

    1991-06-01

    Recent studies on the fractal description of fractures are reviewed. Some problems on this subject are discussed. It seems hopeful to use the fractal dimension as a parameter for quantitative fractography and to apply fractal structures to the development of high toughness materials. (author). 28 refs, 7 figs

  14. MCFire model technical description

    Science.gov (United States)

    David R. Conklin; James M. Lenihan; Dominique Bachelet; Ronald P. Neilson; John B. Kim

    2016-01-01

    MCFire is a computer program that simulates the occurrence and effects of wildfire on natural vegetation, as a submodel within the MC1 dynamic global vegetation model. This report is a technical description of the algorithms and parameter values used in MCFire, intended to encapsulate its design and features a higher level that is more conceptual than the level...

  15. Dry Cleaning, Course Description.

    Science.gov (United States)

    Briscoe, Albert J.; Anderson, Floyd L.

    This course description was developed by educators for use at the Work Opportunity Center which was established to teach high school dropouts and/or hard-core unemployed youth. The ultimate objectives of this course are to prepare students for employment in dry cleaning occupations and to assist them in completing their high school graduation…

  16. Business Education, Course Description.

    Science.gov (United States)

    O'Neill, Robert; Anderson, Floyd L.

    This course description was developed by educators for use at the Work Opportunity Center in teaching high school dropouts and hard-core unemployed youth. The ultimate objectives of the business education curriculum at the Center are to prepare students for employment in clerical occupations and to assist them in completing their high school…

  17. Communications, Course Description.

    Science.gov (United States)

    Vickstrom, Sandra E.; Anderson, Floyd L.

    This course description was developed by educators for use at the Work Opportunity Center which was established to teach high school dropouts and/or hardcore unemployed youth. The ultimate objectives of this curriculum are to develop communicative skills necessary for social interaction and to help the student complete high school graduation…

  18. Reading, Course Description.

    Science.gov (United States)

    Decker, George; Anderson, Floyd L.

    This course description was developed by educators for use at the Work Opportunity Center which was established to teach high school dropouts and hard-core unemployed youth. The objectives of this reading curriculum are to develop skills of retarded readers, further develop skills of adequate readers, and develop an appreciation for reading.…

  19. Updating action domain descriptions.

    Science.gov (United States)

    Eiter, Thomas; Erdem, Esra; Fink, Michael; Senko, Ján

    2010-10-01

    Incorporating new information into a knowledge base is an important problem which has been widely investigated. In this paper, we study this problem in a formal framework for reasoning about actions and change. In this framework, action domains are described in an action language whose semantics is based on the notion of causality. Unlike the formalisms considered in the related work, this language allows straightforward representation of non-deterministic effects and indirect effects of (possibly concurrent) actions, as well as state constraints; therefore, the updates can be more general than elementary statements. The expressivity of this formalism allows us to study the update of an action domain description with a more general approach compared to related work. First of all, we consider the update of an action description with respect to further criteria, for instance, by ensuring that the updated description entails some observations, assertions, or general domain properties that constitute further constraints that are not expressible in an action description in general. Moreover, our framework allows us to discriminate amongst alternative updates of action domain descriptions and to single out a most preferable one, based on a given preference relation possibly dependent on the specified criteria. We study semantic and computational aspects of the update problem, and establish basic properties of updates as well as a decomposition theorem that gives rise to a divide and conquer approach to updating action descriptions under certain conditions. Furthermore, we study the computational complexity of decision problems around computing solutions, both for the generic setting and for two particular preference relations, viz. set-inclusion and weight-based preference. While deciding the existence of solutions and recognizing solutions are PSPACE-complete problems in general, the problems fall back into the polynomial hierarchy under restrictions on the additional

  20. Solid Surfaces, Interfaces and Thin Films

    CERN Document Server

    Lüth, Hans

    2010-01-01

    This book emphasises both experimental and theoretical aspects of surface, interface and thin film physics. As in previous editions the preparation of surfaces and thin films, their atomic and morphological, their vibronic and electronic properties as well as fundamentals of adsorption are treated. Because of their importance in modern information technology and nanostructure physics particular emphasis is paid to electronic surface and interface states, semiconductor space charge layers and heterostructures as well as to superconductor/semiconductor interfaces and magnetic thin films. The latter topic was significantly extended in this new edition by more details about the giant magnetoresistance and a section about the spin-transfer torque mechanism including one new problem as exercise. Two new panels about Kerr-effect and spin-polarized scanning tunnelling microscopy were added, too. Furthermore, the meanwhile important group III-nitride surfaces and high-k oxide/semiconductor interfaces are shortly discu...

  1. DYNAMICS OF HUMIDITY DISTRIBUTION IN CROSS-SECTION OF FLAT MOULDING MASS SAMPLES IN INITIAL DRYING STAGE

    Directory of Open Access Journals (Sweden)

    S. N. Оsipov

    2005-01-01

    Full Text Available It is proposed to use an exponential dependence for description of humidity distribution in cross-section of flat clay mass samples of plastic formation in an initial drying stage. Dependences of exponential curve indices on time from drying start-up and size of an «active» zone of clay mass dehydration have been determined. Analytical-experimental methodology for calculation of maximum permissible humidity differential of moulding mass under crack formation conditions has been developed on the basis of thermo-elasticity model. Some regularities for an estimation of thinning agent usage while making-up mixture.

  2. Quantifying clustering in disordered carbon thin films

    International Nuclear Information System (INIS)

    Carey, J.D.

    2006-01-01

    The quantification of disorder and the effects of clustering in the sp 2 phase of amorphous carbon thin films are discussed. The sp 2 phase is described in terms of disordered nanometer-sized conductive sp 2 clusters embedded in a less conductive sp 3 matrix. Quantification of the clustering of the sp 2 phase is estimated from optical as well as from electron and nuclear magnetic resonance methods. Unlike in other disordered group IV thin film semiconductors, we show that care must be exercised in attributing a meaning to the Urbach energy extracted from absorption measurements in the disordered carbon system. The influence of structural disorder, associated with sp 2 clusters of similar size, and topological disorder due to undistorted clusters of different sizes is also discussed. Extensions of this description to other systems are also presented

  3. Thermodynamical description of excited nuclei

    International Nuclear Information System (INIS)

    Bonche, P.

    1989-01-01

    In heavy ion collisions it has been possible to obtain composite systems at rather high excitation energies corresponding to temperatures of several MeV. The theoretical studies of these systems are based on concepts borrowed from thermodynamics or statistical physics, such as the temperature. In these lectures, we present the concepts of statistical physics which are involved in the physics of heavy ion as they are produced nowadays in the laboratory and also during the final stage of a supernova collapse. We do not attempt to describe the reaction mechanisms which yield such nuclear systems nor their decay by evaporation or fragmentation. We shall only study their static properties. The content of these lectures is organized in four main sections. The first one gives the basic features of statistical physics and thermodynamics necessary to understand quantum mechanics at finite temperature. In the second one, we present a study of the liquid-gas phase transition in nuclear physics. A phenomenological approach of the stability of hot nuclei follows. The microscopic point of view is proposed in the third part. Starting from the basic concepts derived in the first part, it provides a description of excited or hot nuclei which confirms the qualitative results of the second part. Furthermore it gives a full description of most properties of these nuclei as a function of temperature. Finally in the last part, a microscopic derivation of the equation of state of nuclear matter is proposed to study the collapse of a supernova core

  4. Accuracy Enhancement of Hybrid/Mixed Models for Thin-Walled Beam Assemblages

    Science.gov (United States)

    Gendy, A. S.; El-Fayomy, T. I.

    2012-07-01

    Aiming to increase the accuracy and computational efficiency of shear, flexible, thin-walled beam assemblages with arbitrary cross-section, two C0-finite element models for three-dimensional analysis are developed based on the hybrid/mixed variational principle. To eliminate the shear/warping locking in these C0elements, the Hellinger-Reissner-variational principle is adopted. In this, both displacement and stress fields are approximated independently. To enhance the accuracy and performance of these models, the stress parameters are chosen to satisfy the equilibrium within the element level in addition to the conventional requirements; i.e., avoid all kinematic deformation modes and enable the resulting element to handle applications with constrained problems. Such stress parameters are of the interelement-independent type and, therefore, can be eliminated on the element level by applying the relevant stationary conditions, thus leading to the standard form of the stiffness equations for implementation. Further, the underlying generalized beam theory employed accounts for all coupled significant modes of deformations including stretching, bending, shear, torsion, as well as warping. The formulation is also valid for both open- and closed-type, thin-walled sections; this is accomplished by using kinematic descriptions accounting for both flexural and warping torsional effects. Despite the effort in selecting the stress field to satisfy equilibrium within the element level, the present models achieved better accuracy, robustness, and fast convergence.

  5. 48 CFR 1852.214-70 - Caution to offerors furnishing descriptive literature.

    Science.gov (United States)

    2010-10-01

    ... furnishing descriptive literature. 1852.214-70 Section 1852.214-70 Federal Acquisition Regulations System... CLAUSES Texts of Provisions and Clauses 1852.214-70 Caution to offerors furnishing descriptive literature... Descriptive Literature (DEC 1988) Bidders are cautioned against furnishing as a part of their bids descriptive...

  6. Metabolic theory predicts animal self-thinning.

    Science.gov (United States)

    Jonsson, Tomas

    2017-05-01

    The metabolic theory of ecology (MTE) predicts observed patterns in ecology based on metabolic rates of individuals. The theory is influential but also criticized for a lack of firm empirical evidence confirming MTE's quantitative predictions of processes, e.g. outcome of competition, at population or community level. Self-thinning is a well-known population level phenomenon among plants, but a much less studied phenomenon in animal populations and no consensus exists on what a universal thinning slope for animal populations might be, or if it exists. The goal of this study was to use animal self-thinning as a tool to test population-level predictions from MTE, by analysing (i) if self-thinning can be induced in populations of house crickets (Acheta domesticus) and (ii) if the resulting thinning trajectories can be predicted from metabolic theory, using estimates of the species-specific metabolic rate of A. domesticus. I performed a laboratory study where the growth of A. domesticus was followed, from hatching until emergence as adults, in 71 cohorts of five different starting densities. Ninety-six per cent of all cohorts in the three highest starting densities showed evidence of self-thinning, with estimated thinning slopes in general being remarkably close to that expected under metabolic constraints: A cross-sectional analysis of all data showing evidence of self-thinning produced an ordinary least square (OLS) slope of -1·11, exactly that predicted from specific metabolic allometry of A. domesticus. This result is furthermore supported by longitudinal analyses, allowing for independent responses within cohorts, producing a mean OLS slope across cohorts of -1·13 and a fixed effect linear mixed effects models slope of -1·09. Sensitivity analysis showed that these results are robust to how the criterion for on-going self-thinning was defined. Finally, also as predicted by metabolic theory, temperature had a negative effect on the thinning intercept, producing

  7. Multidimensional nonlinear descriptive analysis

    CERN Document Server

    Nishisato, Shizuhiko

    2006-01-01

    Quantification of categorical, or non-numerical, data is a problem that scientists face across a wide range of disciplines. Exploring data analysis in various areas of research, such as the social sciences and biology, Multidimensional Nonlinear Descriptive Analysis presents methods for analyzing categorical data that are not necessarily sampled randomly from a normal population and often involve nonlinear relations. This reference not only provides an overview of multidimensional nonlinear descriptive analysis (MUNDA) of discrete data, it also offers new results in a variety of fields. The first part of the book covers conceptual and technical preliminaries needed to understand the data analysis in subsequent chapters. The next two parts contain applications of MUNDA to diverse data types, with each chapter devoted to one type of categorical data, a brief historical comment, and basic skills peculiar to the data types. The final part examines several problems and then concludes with suggestions for futu...

  8. Descriptive sensory evaluations

    DEFF Research Database (Denmark)

    Dehlholm, Christian

    in projective mapping frame geometry and restrictions on the reported semantics. Two rapid descriptive evaluation techniques were proposed to represent a consensus evaluation. One of the approaches, ‘consensus attribute rating’ (CAR), allows a group of assessors to rate products on a list of pre......-selected attributes. The other approach, ‘consensus Napping’, allows a group of assessors to project products according to an agreed consensus placement on a paper sheet. Evaluations were performed either by groups of experienced sensory assessors or by product experts. Compared with conventional profiling techniques......, the evaluations showed significant correlations between some product configurations, but no consistent and systematic similarities. On average, product expert groups had less in common with the reference profiles than the trained panellist groups and the semantic descriptions of products varied to a large degree...

  9. Descriptive sensory evaluations

    DEFF Research Database (Denmark)

    Dehlholm, Christian

    A recent trend in descriptive sensory evaluation methodology has been the application of rapid evaluation techniques. The ease in use makes the techniques extremely easy to implement by industry and university environments. Thus, one might not consider validity in the choice of method. The overall...... in projective mapping frame geometry and restrictions on the reported semantics. Two rapid descriptive evaluation techniques were proposed to represent a consensus evaluation. One of the approaches, ‘consensus attribute rating’ (CAR), allows a group of assessors to rate products on a list of pre...... for all groups. Hence, consensus profiling with untrained assessors should not be used for the purpose of considering consistency between panels, while assessors trained in the product may perform more reliably. As for projective mapping variations of frame geometry, evaluations in a rectangular...

  10. Resource Description Framework (RDF)

    OpenAIRE

    Gibbins, Nicholas; Shadbolt, Nigel

    2009-01-01

    The Resource Description Framework (RDF) is the standard knowledge representation language for the Semantic Web, an evolution of the World Wide Web that aims to provide a well-founded infrastructure for publishing, sharing and querying structured data. This article provides an introduction to RDF and its related vocabulary definition language RDF Schema, and explains its relationship with the OWL Web Ontology Language. Finally, it provides an overview of the historical development of RDF and ...

  11. TMACS system description

    International Nuclear Information System (INIS)

    Scaief, C.C.

    1995-01-01

    This document provides a description of the Tank Monitor and Control System (TMACS). It is intended as an introduction for those persons unfamiliar with the system as well as a reference document for the users, maintenance personnel, and system designers. In addition to describing the system, the document outlines the associated drawing documentation, provides maintenance and spare parts information, and discusses other TMACS documents that provide additional detail

  12. XML Diagnostics Description Standard

    International Nuclear Information System (INIS)

    Neto, A.; Fernandes, H.; Varandas, C.; Lister, J.; Yonekawa, I.

    2006-01-01

    A standard for the self-description of fusion plasma diagnostics will be presented, based on the Extensible Markup Language (XML). The motivation is to maintain and organise the information on all the components of a laboratory experiment, from the hardware to the access security, to save time and money when problems arises. Since there is no existing standard to organise this kind of information, every Association stores and organises each experiment in different ways. This can lead to severe problems when the organisation schema is poorly documented or written in national languages. The exchange of scientists, researchers and engineers between laboratories is a common practice nowadays. Sometimes they have to install new diagnostics or to update existing ones and frequently they lose a great deal of time trying to understand the currently installed system. The most common problems are: no documentation available; the person who understands it has left; documentation written in the national language. Standardisation is the key to solving all the problems mentioned. From the commercial information on the diagnostic (component supplier; component price) to the hardware description (component specifications; drawings) to the operation of the equipment (finite state machines) through change control (who changed what and when) and internationalisation (information at least in the native language and in English), a common XML schema will be proposed. This paper will also discuss an extension of these ideas to the self-description of ITER plant systems, since the problems will be identical. (author)

  13. 26 CFR 20.0-2 - General description of tax.

    Science.gov (United States)

    2010-04-01

    ... TAXES ESTATE TAX; ESTATES OF DECEDENTS DYING AFTER AUGUST 16, 1954 Introduction § 20.0-2 General description of tax. (a) Nature of tax. The Federal estate tax is neither a property tax nor an inheritance tax... 26 Internal Revenue 14 2010-04-01 2010-04-01 false General description of tax. 20.0-2 Section 20.0...

  14. 48 CFR 214.202-5 - Descriptive literature.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Descriptive literature. 214.202-5 Section 214.202-5 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS... 214.202-5 Descriptive literature. (c) Requirements of invitation for bids. When brand name or equal...

  15. 22 CFR 192.22 - Description of benefits.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Description of benefits. 192.22 Section 192.22 Foreign Relations DEPARTMENT OF STATE HOSTAGE RELIEF VICTIMS OF TERRORISM COMPENSATION Application of Soldiers' and Sailors' Civil Relief Act to Captive Situations § 192.22 Description of benefits. The...

  16. 31 CFR 601.2 - Description of paper.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Description of paper. 601.2 Section... ENGRAVING AND PRINTING, DEPARTMENT OF THE TREASURY DISTINCTIVE PAPER FOR UNITED STATES CURRENCY AND OTHER SECURITIES § 601.2 Description of paper. The paper utilized in the printing of United States currency and...

  17. Optical properties of aluminum oxide thin films and colloidal nanostructures

    International Nuclear Information System (INIS)

    Koushki, E.; Mousavi, S.H.; Jafari Mohammadi, S.A.; Majles Ara, M.H.; Oliveira, P.W. de

    2015-01-01

    In this work, we prepared thin films of aluminum oxide (Al 2 O 3 ) with different thicknesses, using a wet chemical process. The Al 2 O 3 nanoparticles with an average size of 40 nm were dispersed in water and deposited on soda glass substrates. The morphology of the resulting thin films was characterized by means of scanning electron microscopy. The optical properties of the thin films were studied by measuring reflectance and transmittance. A theoretical description of the reflection and transmission mechanism of the films was developed by measuring the thickness and spectral behavior of the refractive index. Numerical evaluations were used for modeling the optical spectra of the thin films of alumina. By fitting numerical curves to the experimental data, the extinction coefficient and refractive index were obtained. The dielectric constant and optical properties of the colloidal solution of the particles were also studied. - Highlights: • Optical properties of alumina thin films and nanocolloids were investigated. • New theoretical depiction of transmission and reflection from the thin films was evaluated. • Interference in reflection from thin films was studied. • Real and imaginary parts of the dielectric constant for alumina nanoparticles were calculated. • Using a novel method, evaluation of optical dispersion and UV–visible absorption were performed.

  18. Magnetic damping phenomena in ferromagnetic thin-films and multilayers

    Science.gov (United States)

    Azzawi, S.; Hindmarch, A. T.; Atkinson, D.

    2017-11-01

    Damped ferromagnetic precession is an important mechanism underpinning the magnetisation processes in ferromagnetic materials. In thin-film ferromagnets and ferromagnetic/non-magnetic multilayers, the role of precession and damping can be critical for spintronic device functionality and as a consequence there has been significant research activity. This paper presents a review of damping in ferromagnetic thin-films and multilayers and collates the results of many experimental studies to present a coherent synthesis of the field. The terms that are used to define damping are discussed with the aim of providing consistent definitions for damping phenomena. A description of the theoretical basis of damping is presented from early developments to the latest discussions of damping in ferromagnetic thin-films and multilayers. An overview of the time and frequency domain methods used to study precessional magnetisation behaviour and damping in thin-films and multilayers is also presented. Finally, a review of the experimental observations of magnetic damping in ferromagnetic thin-films and multilayers is presented with the most recent explanations. This brings together the results from many studies and includes the effects of ferromagnetic film thickness, the effects of composition on damping in thin-film ferromagnetic alloys, the influence of non-magnetic dopants in ferromagnetic films and the effects of combining thin-film ferromagnets with various non-magnetic layers in multilayered configurations.

  19. Optical properties of aluminum oxide thin films and colloidal nanostructures

    Energy Technology Data Exchange (ETDEWEB)

    Koushki, E., E-mail: ehsan.koushki@yahoo.com [Photonics Laboratory, Physics Faculty, Kharazmi University, Tehran (Iran, Islamic Republic of); Physics Department, Hakim Sabzevari University, Sabzevar (Iran, Islamic Republic of); Mousavi, S.H. [INM—Leibniz Institute for New Materials, Campus D2 2, 66123 Saarbrücken (Germany); Jafari Mohammadi, S.A. [INM—Leibniz Institute for New Materials, Campus D2 2, 66123 Saarbrücken (Germany); Department of Chemistry, College of Science, Islamshahr Branch, Islamic Azad University, Tehran (Iran, Islamic Republic of); Majles Ara, M.H. [Photonics Laboratory, Physics Faculty, Kharazmi University, Tehran (Iran, Islamic Republic of); Oliveira, P.W. de [INM—Leibniz Institute for New Materials, Campus D2 2, 66123 Saarbrücken (Germany)

    2015-10-01

    In this work, we prepared thin films of aluminum oxide (Al{sub 2}O{sub 3}) with different thicknesses, using a wet chemical process. The Al{sub 2}O{sub 3} nanoparticles with an average size of 40 nm were dispersed in water and deposited on soda glass substrates. The morphology of the resulting thin films was characterized by means of scanning electron microscopy. The optical properties of the thin films were studied by measuring reflectance and transmittance. A theoretical description of the reflection and transmission mechanism of the films was developed by measuring the thickness and spectral behavior of the refractive index. Numerical evaluations were used for modeling the optical spectra of the thin films of alumina. By fitting numerical curves to the experimental data, the extinction coefficient and refractive index were obtained. The dielectric constant and optical properties of the colloidal solution of the particles were also studied. - Highlights: • Optical properties of alumina thin films and nanocolloids were investigated. • New theoretical depiction of transmission and reflection from the thin films was evaluated. • Interference in reflection from thin films was studied. • Real and imaginary parts of the dielectric constant for alumina nanoparticles were calculated. • Using a novel method, evaluation of optical dispersion and UV–visible absorption were performed.

  20. Optical thin film deposition

    International Nuclear Information System (INIS)

    Macleod, H.A.

    1979-01-01

    The potential usefulness in the production of optical thin-film coatings of some of the processes for thin film deposition which can be classified under the heading of ion-assisted techniques is examined. Thermal evaporation is the process which is virtually universally used for this purpose and which has been developed to a stage where performance is in almost all respects high. Areas where further improvements would be of value, and the possibility that ion-assisted deposition might lead to such improvements, are discussed. (author)

  1. Thin Film Photovoltaics

    Energy Technology Data Exchange (ETDEWEB)

    Zweibel, K.

    1998-11-19

    The motivation to develop thin film technologies dates back to the inception of photovoltaics. It is an idea based on achieving truly low-cost photovoltaics appropriate for mass production and energy significant markets. The key to the idea is the use of pennies worth of active materials. Since sunlight carries relatively little energy in comparison with combustion-based energy sources, photovoltaic (PV) modules must be cheap to produce energy that can be competitive. Thin films are presumed to be the answer to that low-cost requirement. But how cheap do they have to be? The following is an oversimplified analysis that allows some insight into this question.

  2. Shear Thinning in Xenon

    Science.gov (United States)

    Bergm Robert F.; Moldover, Michael R.; Yao, Minwu; Zimmerli, Gregory A.

    2009-01-01

    We measured shear thinning, a viscosity decrease ordinarily associated with complex liquids such as molten plastics or ketchup, near the critical point of xenon. The data span a wide range of dimensionless shear rate: the product of the shear rate and the relaxation time of critical fluctuations was greater than 0.001 and was less than 700. As predicted by theory, shear thinning occurred when this product was greater than 1. The measurements were conducted aboard the Space Shuttle Columbia to avoid the density stratification caused by Earth's gravity.

  3. Prevalence of overweight, obesity, and thinness among urban school-aged children and adolescents in southern Nigeria.

    Science.gov (United States)

    Ene-Obong, Henrietta; Ibeanu, Vivian; Onuoha, NneOla; Ejekwu, Ada

    2012-12-01

    Overweight and obesity are public health problems all over the world because of their devastating social, economic, and health consequences, and they coexist with undernutrition in developing countries. Yet, there are few data on the magnitude of these problems in Nigeria. To assess the prevalence of overweight, obesity, and thinness among urban school-aged children and adolescents. A cross-sectional study of 1,599 children and adolescents 5 to 18 years of age was conducted. The subjects were randomly selected from schools in four urban towns (Lagos, Port Harcourt, Nsukka, and Aba) in southern Nigeria. A validated and pretested questionnaire was used to collect information on the background of the children and adolescents and their parents' socioeconomic status. Weight and height measurements were taken, and body mass indexes were calculated. Overweight, obesity, and thinness were defined according to the International Obesity Task Force cutoff points for children and adolescents 2 to 18 years of age. The data were analyzed by descriptive statistics, cross tabulations, and chi-squared tests. The prevalence rates of overweight, obesity, and thinness were 11.4%, 2.8%, and 13.0%, respectively. More females (3.7%) than males (1.8%) were obese (p overweight was higher among adolescents 10 to 18 years of age (13%) than among children 5 to 9 years of age (9.4%) (p overweight, obesity, and thinness. The rates of overweight, obesity, and thinness were affected by location and income levels. The prevalence rates of overweight and obesity are increasing among urban Nigerian children and adolescents and are of equal magnitude to the prevalence of undernutrition.

  4. Reading between the menu lines: Are restaurants' descriptions of "healthy" foods unappealing?

    Science.gov (United States)

    Turnwald, Bradley P; Jurafsky, Dan; Conner, Alana; Crum, Alia J

    2017-11-01

    As obesity rates continue to climb in America, much of the blame has fallen on the high-calorie meals at popular chain restaurants. Many restaurants have responded by offering "healthy" menu options. Yet menus' descriptions of healthy options may be less attractive than their descriptions of less healthy, standard options. This study examined the hypothesis that the words describing items in healthy menu sections are less appealing than the words describing items in standard menu sections. Menus from the top-selling American casual-dining chain restaurants with dedicated healthy submenus (N = 26) were examined, and the library of words from health-labeled items (N = 5,873) was compared to that from standard menu items (N = 38,343) across 22 qualitative themes (e.g., taste, texture). Log-likelihood ratios revealed that restaurants described healthy items with significantly less appealing themes and significantly more health-related themes. Specifically, healthy items were described as less exciting, fun, traditional, American regional, textured, provocative, spicy hot, artisanal, tasty, and indulgent than standard menu items, but were described with significantly more foreign, fresh, simple, macronutrient, deprivation, thinness, and nutritious words. Describing the most nutritious menu options in less appealing terms may perpetuate beliefs that healthy foods are not flavorful or indulgent, and may undermine customers' choice of healthier dining options. From a public health perspective, incorporating more appealing descriptive language to boost the appeal of nutritious foods may be one avenue to improve dietary health. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  5. Magnetic, in situ, mineral characterization of Chelyabinsk meteorite thin section

    Czech Academy of Sciences Publication Activity Database

    Nábělek, Ladislav; Mazanec, M.; Kdyr, S.; Kletetschka, Günther

    2015-01-01

    Roč. 50, č. 6 (2015), s. 1112-1121 ISSN 1086-9379 Institutional support: RVO:67985831 Keywords : grain-size * physical-properties * anomalies * asteroids * chondrite * origin * hematite * rocks * Mars Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 2.819, year: 2015

  6. Digital Images of Thin Sections from Siple Dome, Version 1

    Data.gov (United States)

    National Aeronautics and Space Administration — This data set is part of the WAISCORES project, an NSF-funded project to understand the influence of the West Antarctic ice sheet on climate and sea level change....

  7. Description of surface systems. Preliminary site description Simpevarp sub area - Version 1.2

    International Nuclear Information System (INIS)

    Lindborg, Tobias

    2005-03-01

    Swedish Nuclear Fuel and Waste Management Co is currently conducting site characterisation in the Simpevarp area. The area is divided into two subareas, the Simpevarp and the Laxemar subarea. The two subareas are surrounded by a common regional model area, the Simpevarp area. This report describes both the regional area and the subareas. This report is an interim version (model version 1.2) of the description of the surface systems at the Simpevarp area, and should be seen as a background report to the site description of the Simpevarp area, version 1.2, SKB-R--05-08. The basis for this description is quality-assured field data available in the SKB SICADA and GIS databases, together with generic data from the literature. The Surface system, here defined as everything above the bedrock, comprises a number of separate disciplines (e.g. hydrology, geology, topography, oceanography and ecology). Each discipline has developed descriptions and models for a number of properties that together represent the site description. The current methodology for developing the surface system description and the integration to ecosystem models is documented in a methodology strategy report SKB-R--03-06. The procedures and guidelines given in that report were followed in this report. Compared with version 1.1 of the surface system description SKB-R--04-25, this report presents considerable additional features, especially in the ecosystem description (Chapter 4) and in the description of the surface hydrology (Section 3.4). A first attempt has also been made to connect the flow of matter (carbon) between the different ecosystems into an overall ecosystem model at a landscape level. A summarised version of this report is also presented in SKB-R--05-08 together with geological-, hydrogeological-, transport properties-, thermal properties-, rock mechanics- and hydrogeochemical descriptions

  8. Description of surface systems. Preliminary site description Simpevarp sub area - Version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Lindborg, Tobias (ed.)

    2005-03-01

    Swedish Nuclear Fuel and Waste Management Co is currently conducting site characterisation in the Simpevarp area. The area is divided into two subareas, the Simpevarp and the Laxemar subarea. The two subareas are surrounded by a common regional model area, the Simpevarp area. This report describes both the regional area and the subareas. This report is an interim version (model version 1.2) of the description of the surface systems at the Simpevarp area, and should be seen as a background report to the site description of the Simpevarp area, version 1.2, SKB-R--05-08. The basis for this description is quality-assured field data available in the SKB SICADA and GIS databases, together with generic data from the literature. The Surface system, here defined as everything above the bedrock, comprises a number of separate disciplines (e.g. hydrology, geology, topography, oceanography and ecology). Each discipline has developed descriptions and models for a number of properties that together represent the site description. The current methodology for developing the surface system description and the integration to ecosystem models is documented in a methodology strategy report SKB-R--03-06. The procedures and guidelines given in that report were followed in this report. Compared with version 1.1 of the surface system description SKB-R--04-25, this report presents considerable additional features, especially in the ecosystem description (Chapter 4) and in the description of the surface hydrology (Section 3.4). A first attempt has also been made to connect the flow of matter (carbon) between the different ecosystems into an overall ecosystem model at a landscape level. A summarised version of this report is also presented in SKB-R--05-08 together with geological-, hydrogeological-, transport properties-, thermal properties-, rock mechanics- and hydrogeochemical descriptions.

  9. MCO Monitoring activity description

    International Nuclear Information System (INIS)

    SEXTON, R.A.

    1998-01-01

    Spent Nuclear Fuel remaining from Hanford's N-Reactor operations in the 1970s has been stored under water in the K-Reactor Basins. This fuel will be repackaged, dried and stored in a new facility in the 200E Area. The safety basis for this process of retrieval, drying, and interim storage of the spent fuel has been established. The monitoring of MCOS in dry storage is a currently identified issue in the SNF Project. This plan outlines the key elements of the proposed monitoring activity. Other fuel stored in the K-Reactor Basins, including SPR fuel, will have other monitoring considerations and is not addressed by this activity description

  10. Description logic rules

    CERN Document Server

    Krötzsch, M

    2010-01-01

    Ontological modelling today is applied in many areas of science and technology,including the Semantic Web. The W3C standard OWL defines one of the most important ontology languages based on the semantics of description logics. An alternative is to use rule languages in knowledge modelling, as proposed in the W3C's RIF standard. So far, it has often been unclear how to combine both technologies without sacrificing essential computational properties. This book explains this problem and presents new solutions that have recently been proposed. Extensive introductory chapters provide the necessary

  11. Cesarean Sections

    Science.gov (United States)

    ... time. They'll get smaller and become a natural skin color in the weeks and months after delivery. And because incisions are often made in the "bikini" area, many C-section scars aren't even noticeable. What If I Don't Feel Better? Call your health care provider if you have: a fever signs of ...

  12. Epitaxial thin films

    Science.gov (United States)

    Hunt, Andrew Tye; Deshpande, Girish; Lin, Wen-Yi; Jan, Tzyy-Jiuan

    2006-04-25

    Epitatial thin films for use as buffer layers for high temperature superconductors, electrolytes in solid oxide fuel cells (SOFC), gas separation membranes or dielectric material in electronic devices, are disclosed. By using CCVD, CACVD or any other suitable deposition process, epitaxial films having pore-free, ideal grain boundaries, and dense structure can be formed. Several different types of materials are disclosed for use as buffer layers in high temperature superconductors. In addition, the use of epitaxial thin films for electrolytes and electrode formation in SOFCs results in densification for pore-free and ideal gain boundary/interface microstructure. Gas separation membranes for the production of oxygen and hydrogen are also disclosed. These semipermeable membranes are formed by high-quality, dense, gas-tight, pinhole free sub-micro scale layers of mixed-conducting oxides on porous ceramic substrates. Epitaxial thin films as dielectric material in capacitors are also taught herein. Capacitors are utilized according to their capacitance values which are dependent on their physical structure and dielectric permittivity. The epitaxial thin films of the current invention form low-loss dielectric layers with extremely high permittivity. This high permittivity allows for the formation of capacitors that can have their capacitance adjusted by applying a DC bias between their electrodes.

  13. Protein thin film machines.

    Science.gov (United States)

    Federici, Stefania; Oliviero, Giulio; Hamad-Schifferli, Kimberly; Bergese, Paolo

    2010-12-01

    We report the first example of microcantilever beams that are reversibly driven by protein thin film machines fueled by cycling the salt concentration of the surrounding solution. We also show that upon the same salinity stimulus the drive can be completely reversed in its direction by introducing a surface coating ligand. Experimental results are throughout discussed within a general yet simple thermodynamic model.

  14. Thin film metal-oxides

    CERN Document Server

    Ramanathan, Shriram

    2009-01-01

    Presents an account of the fundamental structure-property relations in oxide thin films. This title discusses the functional properties of thin film oxides in the context of applications in the electronics and renewable energy technologies.

  15. Rare Earth Oxide Thin Films

    CERN Document Server

    Fanciulli, Marco

    2007-01-01

    Thin rare earth (RE) oxide films are emerging materials for microelectronic, nanoelectronic, and spintronic applications. The state-of-the-art of thin film deposition techniques as well as the structural, physical, chemical, and electrical properties of thin RE oxide films and of their interface with semiconducting substrates are discussed. The aim is to identify proper methodologies for the development of RE oxides thin films and to evaluate their effectiveness as innovative materials in different applications.

  16. Characteristics of heat transfer fouling of thin stillage using model thin stillage and evaporator concentrates

    Science.gov (United States)

    Challa, Ravi Kumar

    The US fuel ethanol demand was 50.3 billion liters (13.3 billion gallons) in 2012. Corn ethanol was produced primarily by dry grind process. Heat transfer equipment fouling occurs during corn ethanol production and increases the operating expenses of ethanol plants. Following ethanol distillation, unfermentables are centrifuged to separate solids as wet grains and liquid fraction as thin stillage. Evaporator fouling occurs during thin stillage concentration to syrup and decreases evaporator performance. Evaporators need to be shutdown to clean the deposits from the evaporator surfaces. Scheduled and unscheduled evaporator shutdowns decrease process throughput and results in production losses. This research were aimed at investigating thin stillage fouling characteristics using an annular probe at conditions similar to an evaporator in a corn ethanol production plant. Fouling characteristics of commercial thin stillage and model thin stillage were studied as a function of bulk fluid temperature and heat transfer surface temperature. Experiments were conducted by circulating thin stillage or carbohydrate mixtures in a loop through the test section which consisted of an annular fouling probe while maintaining a constant heat flux by electrical heating and fluid flow rate. The change in fouling resistance with time was measured. Fouling curves obtained for thin stillage and concentrated thin stillage were linear with time but no induction periods were observed. Fouling rates for concentrated thin stillage were higher compared to commercial thin stillage due to the increase in solid concentration. Fouling rates for oil skimmed and unskimmed concentrated thin stillage were similar but lower than concentrated thin stillage at 10% solids concentration. Addition of post fermentation corn oil to commercial thin stillage at 0.5% increments increased the fouling rates up to 1% concentration but decreased at 1.5%. As thin stillage is composed of carbohydrates, protein, lipid

  17. RSYST - a short description of the modules

    International Nuclear Information System (INIS)

    Ruehle, R.

    1976-04-01

    The modular system RSYST is used for reactor and shielding calculations. A data base managed by a central program, data blocks containing structure descriptions, and hierarchical linking of data blocks enable flexible management of all data. Module sequences are formulated using a user command language. The language features logical branches, variables and arithmetic experssions. Sections of the user language may be stored in the data base and activated at any time. (orig.) [de

  18. Multiple Descriptions Using Sparse Decompositions

    DEFF Research Database (Denmark)

    Jensen, Tobias Lindstrøm; Østergaard, Jan; Dahl, Joachim

    2010-01-01

    In this paper, we consider the design of multiple descriptions (MDs) using sparse decompositions. In a description erasure channel only a subset of the transmitted descriptions is received. The MD problem concerns the design of the descriptions such that they individually approximate the source...... first-order method to the proposed convex problem such that we can solve large-scale instances for image sequences....

  19. Description and reconstruction of the soil pore space using correlation functions

    Science.gov (United States)

    Gerke, K. M.; Karsanina, M. V.; Skvortsova, E. B.

    2012-09-01

    In this paper a method for the description and reconstruction of the soil pore space using correlation functions has been examined. The reconstruction procedure employed here is the best way of verification of the potential descriptor of the soil pore space. Thin sections representing eight major types of pore space in zonal loamy soils and parent materials of the Russian Plain with pores of different shapes and orientations have been chosen for this study. Comparison based on the morphological analysis of the original pore space images and their correlation function reconstructions obtained using simulated annealing technique indicates that this method of reconstruction adequately describes the isometric soil pore space with isometric dissected, isometric slightly dissected, and rounded pores. The two-point correlation functions calculated with the use of the orthogonal method proved to be different for the examined types of soil pore space; they reflect the soil porosity, specific surface, and pore structure correlations at different lengths. The results of this study allow us to conclude that the description of the soil pore space with the help of correlation functions is a promising approach, but requires more development. Further directions of the development of this method for describing the soil pore space and determining the soil physical processes are outlined.

  20. Evalutive Descriptions of Art

    Directory of Open Access Journals (Sweden)

    Nataša Lah

    2016-01-01

    Full Text Available Taking into account the fact that, throughout history, certain artworks have been considered as “worth of watching” (according to the Greek etymon ἀξιοϑέατος / aksioteatos, preservation, or theorizing, while others were not, one is led to investigate the various types of evaluative descriptions. Those artworks that are more valuable than others, or simply valuable in themselves on the basis of rather specific features, have always represented the paradigmatic model for the evaluator, thus revealing the identitary nature of value as different from one epoch to another. Our aim has been to discern, with regard to this starting point, the way in which the process of evaluating artworks fits the general matrix of the universal theory of value, with its clearly distinguished levels of evaluation, beginning with value descriptions, continuing through the features of evaluation or abstract qualities of values extracted from these descriptions, and ending with value norms or systems of accepted generalizations in evaluation. Value standpoints in such an evaluation matrix represent dispositions or preferences in procedures, which reflect the norms or signifying concepts of the time. Corresponding procedures, or applications of the hierarchicized signification of artworks, are manifested in all known forms of artwork assessment: attribution, institutionalization, and setting of priorities in terms of exhibition, conservation, acquisition, restoration, and so on. Research in the history of European art-historical ideas has corroborated the hypothesis that, prior to the late 18th century, clear normative patterns were applied when it came to the evaluation of artworks. However, with the emergence of early Romanticism, this could no longer be done in the traditional way. Before the period in question, visual art was created (regardless of some stylistic discrepancies between individual authors and classified according to well-defined thematic

  1. Polemic and Descriptive Negations

    DEFF Research Database (Denmark)

    Horslund, Camilla Søballe

    2011-01-01

    as such may be more or less central to the meaning of the utterance. The present paper investigates the role of morphosyntactic and prosodic prominence as well as register and social setting on the interpretation of negations. It seems plausible to expect that if the negation as such is central to the meaning...... of the utterance (as in polemic negations), the negation will be articulated prominently in order to emphasise this importance. Likewise, if the negation is not central to the meaning of the utterance, it should not be articulated prominently. Moreover, it is plausible to expect descriptive negations to be more...... common in certain social context or genres, while polemic negations are more likely to come up in other genres and social settings. Previous studies have shown a relation between articulatory prominence and register, which may further inform the analysis. Hence, the paper investigates how articulatory...

  2. Task Description Language

    Science.gov (United States)

    Simmons, Reid; Apfelbaum, David

    2005-01-01

    Task Description Language (TDL) is an extension of the C++ programming language that enables programmers to quickly and easily write complex, concurrent computer programs for controlling real-time autonomous systems, including robots and spacecraft. TDL is based on earlier work (circa 1984 through 1989) on the Task Control Architecture (TCA). TDL provides syntactic support for hierarchical task-level control functions, including task decomposition, synchronization, execution monitoring, and exception handling. A Java-language-based compiler transforms TDL programs into pure C++ code that includes calls to a platform-independent task-control-management (TCM) library. TDL has been used to control and coordinate multiple heterogeneous robots in projects sponsored by NASA and the Defense Advanced Research Projects Agency (DARPA). It has also been used in Brazil to control an autonomous airship and in Canada to control a robotic manipulator.

  3. YUCCA MOUNTAIN SITE DESCRIPTION

    Energy Technology Data Exchange (ETDEWEB)

    A.M. Simmons

    2004-04-16

    The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel.

  4. YUCCA MOUNTAIN SITE DESCRIPTION

    International Nuclear Information System (INIS)

    Simmons, A.M.

    2004-01-01

    The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel

  5. Olkiluoto site description 2004

    International Nuclear Information System (INIS)

    2005-05-01

    This Olkiluoto Site Description 2004 is a description of the Olkiluoto site, in which the various disciplines have been integrated to produce a coherent picture, and is based on the data available prior to the start of the underground excavation of the ONKALO facility. This report is the first version of such a Site Report and supplements the site syntheses that have already been published. Further Site Reports will be produced on a regular basis and it is planned that the Site Report should form the geoscientific basis of the Safety Case in a future licence application. The report updates the Baseline report published in 2003 and is designed to produce an integrated site model, by focusing on interdisciplinary interactions, and also by including new data obtained during 2003 and 2004. The report has been produced by the OMTF (Olkiluoto Modelling Task Force), which covers the areas of geology, rock mechanics, hydrogeology and hydrogeochemistry. In addition to discussing the input from these four disciplines, the Site Report also includes a description of the surface conditions. Formally, the surface conditions are not within the remit of the OMTF, which is concentrating on modelling the bedrock around the ONKALO and the future repository. The influence of the surface conditions to the overall system and to the conditions at depth is recognised, however, and thus a summary of climate, ecosystems and overburden properties is also included in this report. Chapter 1 sets out the methodology to be used in the modelling, describes the various discipline-specific models which are developed and the modelled areas which are used, and also describes two important processes - the prediction/outcome studies and the uncertainty and confidence assessment. The difference between the estimate (the prediction) and the result (the outcome) indicates the level of knowledge and the prevailing uncertainties in the models. Chapter 2 presents the applied investigation data, which are

  6. Shear-thinning Fluid

    Science.gov (United States)

    2001-01-01

    Whipped cream and the filling for pumpkin pie are two familiar materials that exhibit the shear-thinning effect seen in a range of industrial applications. It is thick enough to stand on its own atop a piece of pie, yet flows readily when pushed through a tube. This demonstrates the shear-thinning effect that was studied with the Critical Viscosity of Xenon Experiment (CVX-2) on the STS-107 Research 1 mission in 2002. CVX observed the behavior of xenon, a heavy inert gas used in flash lamps and ion rocket engines, at its critical point. The principal investigator was Dr. Robert Berg of the National Institutes of Standards and Technology in Gaithersburg, MD.

  7. Functional organic thin films

    OpenAIRE

    Scharnberg, Michael

    2007-01-01

    Organic thin films are used in many technological and engineering applications nowadays. They find use as coatings, sensors, detectors, as matrix materials in nanocomposites, as self-assembled monolayers for surface functionalization, as low-k dielectrics in integrated circuits and in advanced organic electronic applications like organic light emitting diodes, organic field effect transistors and organic photovoltaics (esp. organic solar cells) and many other applications. OLED displays are n...

  8. Thin film processes

    CERN Document Server

    Vossen, John L

    1978-01-01

    Remarkable advances have been made in recent years in the science and technology of thin film processes for deposition and etching. It is the purpose of this book to bring together tutorial reviews of selected filmdeposition and etching processes from a process viewpoint. Emphasis is placed on the practical use of the processes to provide working guidelines for their implementation, a guide to the literature, and an overview of each process.

  9. Thin film superconductor magnetic bearings

    Science.gov (United States)

    Weinberger, Bernard R.

    1995-12-26

    A superconductor magnetic bearing includes a shaft (10) that is subject to a load (L) and rotatable around an axis of rotation, a magnet (12) mounted to the shaft, and a stator (14) in proximity to the shaft. The stator (14) has a superconductor thin film assembly (16) positioned to interact with the magnet (12) to produce a levitation force on the shaft (10) that supports the load (L). The thin film assembly (16) includes at least two superconductor thin films (18) and at least one substrate (20). Each thin film (18) is positioned on a substrate (20) and all the thin films are positioned such that an applied magnetic field from the magnet (12) passes through all the thin films. A similar bearing in which the thin film assembly (16) is mounted on the shaft (10) and the magnet (12) is part of the stator (14) also can be constructed.

  10. A distortional semi-discretized thin-walled beam element

    DEFF Research Database (Denmark)

    Andreassen, Michael Joachim; Jönsson, Jeppe

    2013-01-01

    Due to the increased consumption of thin-walled structural elements there has been increasing focus and need for more detailed calculations as well as development of new approaches. In this paper a thin-walled beam element including distortion of the cross section is formulated. The formulation...... is based on a generalized beam theory (GBT), in which the classic Vlasov beam theory for analysis of open and closed thin-walled cross sections is generalized by including distortional displacements. The beam element formulation utilizes a semi-discretization approach in which the cross section...... is discretized into wall elements and the analytical solutions of the related GBT beam equations are used as displacement functions in the axial direction. Thus the beam element contains the semi-analytical solutions. In three related papers the authors have recently presented the semi-discretization approach...

  11. Quality Assurance Requirements and Description

    International Nuclear Information System (INIS)

    Ram Murthy

    2002-01-01

    The Quality Assurance Requirements and Description (QARD) is the principal Quality Assurance (QA) document for the Civilian Radioactive Waste Management Program (Program). It establishes the minimum requirements for the QA program [INTRODUCTION :1p2s (NOT A REQUIREMENT)]. The QARD contains regulatory requirements and program commitments necessary for the development of an effective QA program [INTRODUCTION :1p3s (NOT A REQUIREMENT)]. Implementing documents must be based on, and be consistent with the QARD. The QARD applies to the following: (1) Acceptance of spent nuclear fuel and high-level waste. (2) Transport of spent nuclear fuel and high-level waste. (3) Storage of spent nuclear fuel through receipt of storage cask certification or a facility operating license. (4) Monitored Geologic Repository, including the site characterization activities [Exploratory Studies Facility (ESF) and surface based testing], through receipt of an operating license. (5) High-level waste form development through qualification, production, and acceptance. (6) Characterization of DOE spent nuclear fuel, and conditioning through acceptance of DOE spent nuclear fuel. Section 2.0, Quality Assurance Program, defines in greater detail criteria for determining work subject to the QARD

  12. Scanning Angle Raman spectroscopy in polymer thin film characterization

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, Vy H.T. [Iowa State Univ., Ames, IA (United States)

    2015-12-19

    The focus of this thesis is the application of Raman spectroscopy for the characterization of thin polymer films. Chapter 1 provides background information and motivation, including the fundamentals of Raman spectroscopy for chemical analysis, scanning angle Raman scattering and scanning angle Raman scattering for applications in thin polymer film characterization. Chapter 2 represents a published manuscript that focuses on the application of scanning angle Raman spectroscopy for the analysis of submicron thin films with a description of methodology for measuring the film thickness and location of an interface between two polymer layers. Chapter 3 provides an outlook and future directions for the work outlined in this thesis. Appendix A, contains a published manuscript that outlines the use of Raman spectroscopy to aid in the synthesis of heterogeneous catalytic systems. Appendix B and C contain published manuscripts that set a foundation for the work presented in Chapter 2.

  13. Nanoparticles inclusions in self assembly thin smectic films

    International Nuclear Information System (INIS)

    Hamdoun, B.; Charara, J.; Zaiour, A.

    2004-01-01

    Full text. Processing of nanocomposites based on nanoparticles inclusion in thin smectic-A liquid crystal was reviewed. Thin smectic-A liquid crystal consists of a stack of regularly spaced membranes that are frequently formed in thin diblock copolymers. Particular attention was given to the scientific concepts that underpin the fabrication of special composite derived copolymer components. The complex interplay between suspension stability and its structural evolution during nanomaterials processing was highlighted. Inclusions, such as nanoparticles, coupled locally to the smectic may deform the membranes over a large length scale. We determined the distortion field due to one inclusion using the Landau-de Gennes description of smectic liquid crystals and by neglecting the interactions between nanoparticles. The equilibrium position of the particle was shown to depend on both the surface tension at the film boundary and the volume fraction of the nanoparticles

  14. Descriptive assessment for physical education

    OpenAIRE

    Pirih Tavčar, Ksenija

    2016-01-01

    Descriptive grading is a type of grading in which opinions about children’s knowledge or products are expressed in sentences. This opinion highlights what individual children know or have mastered, what they have not mastered, and what they should do to improve. In descriptive grading, the pupil’s work is assessed in terms of learning objectives. In their descriptive grades, physical education (PE) teachers write down everything that they have taught and reviewed with their pupils during t...

  15. Olkiluoto biosphere description 2006

    International Nuclear Information System (INIS)

    Haapanen, R.; Aro, L.; Ilvesniemi, H.; Kareinen, T.; Kirkkala, T.; Mykrae, S.; Turkki, H.; Lahdenperae, A.-M.; Ikonen, A.T.K.

    2007-02-01

    This report summarises the current knowledge of the biosphere of Olkiluoto, and it is the first Biosphere Description Report. The elements considered were climate, topography, land use, overburden, terrestrial vegetation and fauna and sea flora, fauna and water. The principal aim was to present a synthesis of the present state (now to 2020) and the main features of past evolution of the biosphere at the site using currently available data. The lack of site specific parameters and their importance was discussed. Conceptual ecosystem models are presented for land and sea. Currently available data made it possible to calculate the biomass of the terrestrial vegetation and further convert it to carbon. In the case of terrestrial animals, preliminary figures are given for moose alone due to lack of sitespecific data. For the same reason, the sea ecosystem model was not quantified within this work. The ecosystems on Olkiluoto do not deviate from the surrounding areas. Since mires are few on Olkiluoto, forests are the most important land ecosystem. However, coastal areas are the transition zones between land and sea, and also potential sites for deep groundwater discharge. The major interest concerning aquatic ecosystems was laid on four future lakes potentially developing from the sea due to the land up-lift. Current sea sediments near Olkiluoto are future land areas, and thus very important. Spatially, the forest ecosystems of Olkiluoto are now most comprehensively covered, while the temporal coverage is highest in sea ecosystems. Lack of data is greatest in terrestrial fauna and sea sediments. During this work, the system boundaries were crossed and the use of data over disciplines was started. The data were mostly in agreement, but some discrepancies were detected. To solve these, and to supplement the existing data, some recommendations were given. (orig.)

  16. Carbon thin film thermometry

    Science.gov (United States)

    Collier, R. S.; Sparks, L. L.; Strobridge, T. R.

    1973-01-01

    The work concerning carbon thin film thermometry is reported. Optimum film deposition parameters were sought on an empirical basis for maximum stability of the films. One hundred films were fabricated for use at the Marshall Space Flight Center; 10 of these films were given a precise quasi-continuous calibration of temperature vs. resistance with 22 intervals between 5 and 80 K using primary platinum and germanium thermometers. Sensitivity curves were established and the remaining 90 films were given a three point calibration and fitted to the established sensitivity curves. Hydrogen gas-liquid discrimination set points are given for each film.

  17. Trusting Description: Authenticity, Accountability, and Archival Description Standards

    Science.gov (United States)

    MacNeil, Heather

    2009-01-01

    It has been suggested that one of the purposes of archival description is to establish grounds for presuming the authenticity of the records being described. The article examines the implications of this statement by examining the relationship between and among authenticity, archival description, and archival accountability, assessing how this…

  18. Radiation and scattering by thin-wire structures in the complex frequency domain. [electromagnetic theory for thin-wire antennas

    Science.gov (United States)

    Richmond, J. H.

    1974-01-01

    Piecewise-sinusoidal expansion functions and Galerkin's method are employed to formulate a solution for an arbitrary thin-wire configuration in a homogeneous conducting medium. The analysis is performed in the real or complex frequency domain. In antenna problems, the solution determines the current distribution, impedance, radiation efficiency, gain and far-field patterns. In scattering problems, the solution determines the absorption cross section, scattering cross section and the polarization scattering matrix. The electromagnetic theory is presented for thin wires and the forward-scattering theorem is developed for an arbitrary target in a homogeneous conducting medium.

  19. Static and dynamic buckling of thin-walled plate structures

    CERN Document Server

    Kubiak, Tomasz

    2013-01-01

    This monograph deals with buckling and postbuckling behavior of thin plates and thin-walled structures with flat wall subjected to static and dynamic load. The investigations are carried out in elastic range. The basic assumption here is the  thin plate theory. This method is used to determination the buckling load and postbuckling analysis of thin-walled structures subjected to static and dynamic load. The book introduces two methods for static and dynamic buckling investigation which allow for a wider understanding of the phenomenon. Two different methods also can allow uncoupling of the phenomena occurring at the same time and attempt to estimate their impact on the final result. A general mathematical model, adopted in proposed analytical-numerical method, enables the consideration of all types of stability loss i.e.local, global and interactive forms of buckling. The applied numerical-numerical method includes adjacent of walls, shear-lag phenomenon and a deplanation of cross-sections.

  20. 48 CFR 14.404-4 - Restrictions on disclosure of descriptive literature.

    Science.gov (United States)

    2010-10-01

    ... of descriptive literature. 14.404-4 Section 14.404-4 Federal Acquisition Regulations System FEDERAL... Contract 14.404-4 Restrictions on disclosure of descriptive literature. When a bid is accompanied by descriptive literature (as defined in 2.101), and the bidder imposes a restriction that prevents the public...

  1. 40 CFR 239.4 - Narrative description of state permit program.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Narrative description of state permit program. 239.4 Section 239.4 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID... Narrative description of state permit program. The description of a state's program must include: (a) An...

  2. Ribbons and groups: a thin rod theory for catheters and filaments

    Science.gov (United States)

    Lawton, Wayne; Raghavan, Raghu; Ranjan, S. R.; Viswanathan, Raju

    1999-03-01

    We use the rotation group and its algebra to provide a novel description of deformations of special Cosserat rods or thin rods that have negligible shear. Our treatment was motivated by the problem of the simulation of catheter navigation in a network of blood vessels, where this description is directly useful. In this context, we derive the Euler differential equations that characterize equilibrium configurations of stretch-free thin rods. We apply perturbation methods, used in time-dependent quantum theory, to the thin rod equations to describe incremental deformations of partially constrained rods. Further, our formalism leads naturally to a new and efficient finite element method valid for arbitrary deformations of thin rods with negligible stretch. Associated computational algorithms are developed and applied to the simulation of catheter motion inside an artery network.

  3. Thin-Film Power Transformers

    Science.gov (United States)

    Katti, Romney R.

    1995-01-01

    Transformer core made of thin layers of insulating material interspersed with thin layers of ferromagnetic material. Flux-linking conductors made of thinner nonferromagnetic-conductor/insulator multilayers wrapped around core. Transformers have geometric features finer than those of transformers made in customary way by machining and mechanical pressing. In addition, some thin-film materials exhibit magnetic-flux-carrying capabilities superior to those of customary bulk transformer materials. Suitable for low-cost, high-yield mass production.

  4. Self-compassion as a moderator of thinness-related pressures' associations with thin-ideal internalization and disordered eating.

    Science.gov (United States)

    Tylka, Tracy L; Russell, Hannah L; Neal, Ashley A

    2015-04-01

    During situations that threaten personal adequacy, people high in self-compassion are kind and caring toward themselves, mindful of their distress, and recognize that being imperfect is part of the human experience. Therefore, self-compassion may offset certain disorders (e.g., eating disorders) associated with environmental threats (e.g., thinness-related pressures). In this cross-sectional study, we explored self-compassion's associations with threats involving thinness-related pressures (from friends, family, partners, and media), thin-ideal internalization, and disordered eating among an online sample of 435 U.S. community women. Findings indicated that self-compassion buffered the links from media thinness-related pressure to disordered eating and thin-ideal internalization. Furthermore, higher self-compassion was directly associated with fewer perceived thinness-related pressures, lower thin-ideal internalization, and lower disordered eating. Collectively, these findings add to the growing conceptualization of self-compassion as beneficial to eating behavior and help justify pursuing rigorous longitudinal and clinical examinations of self-compassion as a protective factor of disordered eating. Copyright © 2014 Elsevier Ltd. All rights reserved.

  5. Underreporting of complete uterine rupture and uterine dehiscence in women with previous cesarean section.

    Science.gov (United States)

    Fogelberg, Maria; Baranov, Anton; Herbst, Andreas; Vikhareva, Olga

    2017-09-01

    To determine the true incidence of complete uterine rupture and uterine dehiscence among women delivered by cesarean section after a previous cesarean section. Medical records of all women who delivered at University Hospital in Malmö, Sweden, during 2005-2009 (n = 21 420) were retrieved from the electronic patient record system (EPRS). After adjustment for inaccuracies, 716 women who had undergone repeat cesarean section were identified and their operation reports were reviewed. Descriptions of complete uterine rupture or uterine dehiscence in operation reports were compared with diagnoses registered in EPRS with International Classification of Diseases codes version 10 (ICD-10). Sensitivity and specificity of complete uterine rupture registration were calculated. There were 13 women with a registered diagnosis of uterine rupture. After reviewing medical records of women with repeat cesarean section, seven additional cases of complete uterine rupture, 33 cases of uterine dehiscence and 39 cases of extremely thin myometrium were identified. The incidence of complete uterine rupture and uterine dehiscence for women who delivered by repeat cesarean section was 2.8% and 10.1%, respectively. Diagnosis of complete uterine rupture was underreported in the EPRS by 35% and diagnosis of uterine dehiscence was missing in 100% of cases.

  6. Handbook of thin film technology

    CERN Document Server

    Frey, Hartmut

    2015-01-01

    “Handbook of Thin Film Technology” covers all aspects of coatings preparation, characterization and applications. Different deposition techniques based on vacuum and plasma processes are presented. Methods of surface and thin film analysis including coating thickness, structural, optical, electrical, mechanical and magnetic properties of films are detailed described. The several applications of thin coatings and a special chapter focusing on nanoparticle-based films can be found in this handbook. A complete reference for students and professionals interested in the science and technology of thin films.

  7. Designing shear-thinning

    Science.gov (United States)

    Nelson, Arif Z.; Ewoldt, Randy H.

    2017-11-01

    Design in fluid mechanics often focuses on optimizing geometry (airfoils, surface textures, microfluid channels), but here we focus on designing fluids themselves. The dramatically shear-thinning ``yield-stress fluid'' is currently the most utilized non-Newtonian fluid phenomenon. These rheologically complex materials, which undergo a reversible transition from solid-like to liquid-like fluid flow, are utilized in pedestrian products such as paint and toothpaste, but also in emerging applications like direct-write 3D printing. We present a paradigm for yield-stress fluid design that considers constitutive model representation, material property databases, available predictive scaling laws, and the many ways to achieve a yield stress fluid, flipping the typical structure-to-rheology analysis to become the inverse: rheology-to-structure with multiple possible materials as solutions. We describe case studies of 3D printing inks and other flow scenarios where designed shear-thinning enables performance remarkably beyond that of Newtonian fluids. This work was supported by Wm. Wrigley Jr. Company and the National Science Foundation under Grant No. CMMI-1463203.

  8. Negative ion detachment cross sections

    International Nuclear Information System (INIS)

    Champion, R.L.; Doverspike, L.D.

    1992-10-01

    The authors have measured absolute cross sections for electron detachment and charge exchange for collision of O and S with atomic hydrogen, have investigated the sputtering and photodesorption of negative ions from gas covered surfaces, and have begun an investigation of photon-induced field emission of electrons from exotic structures. Brief descriptions of these activities as well as future plans for these projects are given below

  9. Biomass conversion and expansion factors are afected by thinning

    Directory of Open Access Journals (Sweden)

    Teresa Duque Enes

    2014-12-01

    Full Text Available Aim of the study: The objective of this paper is to investigate the use of Biomass Conversion and Expansion Factors (BCEFs in maritime pine (Pinus pinaster Ait. stands subjected to thinning.Area of the study: The study area refers to different ecosystems of maritime pine stands inNorthern Portugal.Material and methods: The study is supported by time data series and cross sectional data collected in permanent plots established in the North of Portugal. An assessment of BCEF values for the aboveground compartments and for total was completed for each studied stand. Identification of key variables affecting the value of the BCEFs in time and with thinning was conducted using correlation analysis. Predictive models for estimation of the BCEFs values in time and after thinning were developed using nonlinear regression analysis.Research highlights: For periods of undisturbed growth, the results show an allometric relationship between the BCEFs, the dominant height and the mean diameter. Management practices such as thinning also influence the factors. Estimates of the ratio change before and after thinning depend on thinning severity and thinning type. The developed models allow estimating the biomass of the stands, for the aboveground compartments and for total, based on information of stand characteristics and of thinning descriptors. These estimates can be used to assess the forest dry wood stocks to be used for pulp, bioenergy or other purposes, as well as the biomass quantification to support the evaluation of the net primary productivity.Keywords: carbon; softwood; thinning; volume; wood energy; maritime pine.

  10. Technical description of the Swedish natural gas distribution system

    Energy Technology Data Exchange (ETDEWEB)

    Nilsson, Ronny [KM Miljoeteknik AB (Sweden)

    1997-06-01

    This description of the Swedish distribution network has been produced to provide information for distribution companies, trade organisations, etc., who have an interest in getting a clear understanding of the technical design and standards, technical directives, etc., which have served as guidance in the development. The technical description covers the piping system from a measuring and regulating station (MR station) up to the consumer`s substation, however, only sections with a maximum operating pressure of 4 bar. By way of introduction, the description contains introductory information on supply channels, consumption patterns and the principal design of the high pressure network in Sweden 10 refs, 10 figs, 1 tab

  11. A Variational approach to thin film hydrodynamics of binary mixtures

    KAUST Repository

    Xu, Xinpeng

    2015-02-04

    In order to model the dynamics of thin films of mixtures, solutions, and suspensions, a thermodynamically consistent formulation is needed such that various coexisting dissipative processes with cross couplings can be correctly described in the presence of capillarity, wettability, and mixing effects. In the present work, we apply Onsager\\'s variational principle to the formulation of thin film hydrodynamics for binary fluid mixtures. We first derive the dynamic equations in two spatial dimensions, one along the substrate and the other normal to the substrate. Then, using long-wave asymptotics, we derive the thin film equations in one spatial dimension along the substrate. This enables us to establish the connection between the present variational approach and the gradient dynamics formulation for thin films. It is shown that for the mobility matrix in the gradient dynamics description, Onsager\\'s reciprocal symmetry is automatically preserved by the variational derivation. Furthermore, using local hydrodynamic variables, our variational approach is capable of introducing diffusive dissipation beyond the limit of dilute solute. Supplemented with a Flory-Huggins-type mixing free energy, our variational approach leads to a thin film model that treats solvent and solute in a symmetric manner. Our approach can be further generalized to include more complicated free energy and additional dissipative processes.

  12. Monitored Geologic Repository Project Description Document

    International Nuclear Information System (INIS)

    Curry, P.

    2000-01-01

    The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the ''Monitored Geologic Repository Requirements Document'' (MGR RD) (CRWMS M and O 2000b) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) engineering design basis in support of design and performance assessment in preparing for the Site Recommendation (SR) and License Application (LA) milestones. The engineering design basis documented in the PDD is to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the engineering design basis from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the engineering design basis captured in the SDDs and the design requirements captured in U.S. Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M and O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 2-1, the MGR Architecture (Section 4.1),the Engineering Design Bases (Section 5), and the Controlled Project Assumptions (Section 6)

  13. Monitored Geologic Repository Project Description Document

    Energy Technology Data Exchange (ETDEWEB)

    P. M. Curry

    2001-01-30

    The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the ''Monitored Geologic Repository Requirements Document'' (MGR RD) (YMP 2000a) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) technical requirements in support of design and performance assessment in preparing for the Site Recommendation (SR) and License Application (LA) milestones. The technical requirements documented in the PDD are to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the technical requirements from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the technical requirements captured in the SDDs and the design requirements captured in US Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M and O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 1-1, the MGR Architecture (Section 4.1), the Technical Requirements (Section 5), and the Controlled Project Assumptions (Section 6).

  14. Monitored Geologic Repository Project Description Document

    Energy Technology Data Exchange (ETDEWEB)

    P. Curry

    2001-06-26

    The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the Yucca Mountain Site Characterization Project Requirements Document (YMP RD) (YMP 2001a) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) technical requirements in support of design and performance assessment in preparing for the Site Recommendation (SR) and License Application (LA) milestones. The technical requirements documented in the PDD are to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the technical requirements from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the technical requirements captured in the SDDs and the design requirements captured in US Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M&O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 1-1, the MGR Architecture (Section 4.1), the Technical Requirements (Section 5), and the Controlled Project Assumptions (Section 6).

  15. Monitored Geologic Repository Project Description Document

    Energy Technology Data Exchange (ETDEWEB)

    P. Curry

    2000-06-01

    The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the ''Monitored Geologic Repository Requirements Document'' (MGR RD) (CRWMS M&O 2000b) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) engineering design basis in support of design and performance assessment in preparing for the Site Recommendation (SR) and License Application (LA) milestones. The engineering design basis documented in the PDD is to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the engineering design basis from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the engineering design basis captured in the SDDs and the design requirements captured in U.S. Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M&O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 2-1, the MGR Architecture (Section 4.1),the Engineering Design Bases (Section 5), and the Controlled Project Assumptions (Section 6).

  16. Monitored Geologic Repository Project Description Document

    International Nuclear Information System (INIS)

    Curry, P. M.

    2001-01-01

    The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the ''Monitored Geologic Repository Requirements Document'' (MGR RD) (YMP 2000a) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) technical requirements in support of design and performance assessment in preparing for the Site Recommendation (SR) and License Application (LA) milestones. The technical requirements documented in the PDD are to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the technical requirements from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the technical requirements captured in the SDDs and the design requirements captured in US Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M and O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 1-1, the MGR Architecture (Section 4.1), the Technical Requirements (Section 5), and the Controlled Project Assumptions (Section 6)

  17. [Psycho-oncology care in rural areas : Results from a cross-sectional survey on the utilisation of community-based psychosocial support services].

    Science.gov (United States)

    Haun, Markus W; Sklenarova, Halina; Zimmermann-Schlegel, Verena; Herzog, Wolfgang; Hartmann, Mechthild

    2018-01-01

    Clinically relevant distress and unmet psychosocial needs frequently occur in the course of cancer diseases. Particularly for thinly populated rural areas in Germany rates of distressed patients and uptake of community-based psycho-oncology services are unknown. Determination of a) the proportion of cancer patients with psychosocial distress and unmet needs and b) the utilisation of community-based psycho-oncology services in thinly populated rural areas. Prospective cross-sectional study of 229 cancer patients (colon, breast, prostate cancer) living in thinly populated rural areas. Indicators for clinically relevant distress and utilisation of psychosocial services were assessed by applying screening instruments. We conducted descriptive and multivariate analyses. More than one third of all cancer patients (39.3%) in thinly populated areas exhibited clinically relevant distress. However, only 15.6% of distressed patients consulted community-based psycho-oncology services. Most frequently, medical or psychological psychotherapists were contacted. Information deficits of patients and attending physicians alongside dispositional factors emerged as the main reasons for non-utilisation. This study presents first data on psycho-oncology care in rural areas in Germany stratifying the degree of urbanisation in line with the standards of the European Commission. Concerning limitations, we only accounted for structural service coverage, leaving aside other indicators for socio-spatial deprivation.

  18. Stability of Axially Compressed Single-Cell Mono-Symmetric Thin ...

    African Journals Online (AJOL)

    Compared with conventional structural columns, the pronounced role of instabilities complicates the behaviour and design of thin-walled columns. This study investigated the stability of axially compressed single-cell thin-walled column with mono-symmetric non-deformable cross-sections. The work involved a theoretical ...

  19. 10 CFR 1.51 - Description and custody of NRC seal.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Description and custody of NRC seal. 1.51 Section 1.51... § 1.51 Description and custody of NRC seal. (a) Pursuant to section 201(a) of the Energy... is responsible for custody of the impression seals and of replica (plaque) seals. ...

  20. 37 CFR 2.72 - Amendments to description or drawing of the mark.

    Science.gov (United States)

    2010-07-01

    ... drawing of the mark. 2.72 Section 2.72 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND....72 Amendments to description or drawing of the mark. (a) In an application based on use in commerce under section 1(a) of the Act, the applicant may amend the description or drawing of the mark only if...

  1. FY 1992/1993 Biennial RDT and E Descriptive Summaries: DARPA. Amended.

    Science.gov (United States)

    1992-01-01

    hardware (microwave components, analog/digital converters, motors , bearing, accelerometers, and SQUIDS). AMENDED FY 1992/1993 BIENNIAL RDT&E DESCRIPTIVE...effective materials synthesis and procesoing technologies. 0 Demonstrate continuous manufacturing process for thin film coating and uniform fiber...microwave components, analog and digital (A/D) converters, motors , bearings, accelerometers, SQUIDs, and other devices). The current emphasis is

  2. Thin-film solar cell

    NARCIS (Netherlands)

    Metselaar, J.W.; Kuznetsov, V.I.

    1998-01-01

    The invention relates to a thin-film solar cell provided with at least one p-i-n junction comprising at least one p-i junction which is at an angle alpha with that surface of the thin-film solar cell which collects light during operation and at least one i-n junction which is at an angle beta with

  3. Ferromagnetic thin films

    Science.gov (United States)

    Krishnan, Kannan M.

    1994-01-01

    A ferromagnetic .delta.-Mn.sub.1-x Ga.sub.x thin film having perpendicular anisotropy is described which comprises: (a) a GaAs substrate, (b) a layer of undoped GaAs overlying said substrate and bonded thereto having a thickness ranging from about 50 to about 100 nanometers, (c) a layer of .delta.-Mn.sub.1-x Ga.sub.x overlying said layer of undoped GaAs and bonded thereto having a thickness ranging from about 20 to about 30 nanometers, and (d) a layer of GaAs overlying said layer of .delta.-Mn.sub.1-x Ga.sub.x and bonded thereto having a thickness ranging from about 2 to about 5 nanometers, wherein x is 0.4 .+-.0.05.

  4. Modelling object typicality in description logics - [Workshop on Description Logics

    CSIR Research Space (South Africa)

    Britz, K

    2009-07-01

    Full Text Available The authors presents a semantic model of typicality of concept members in description logics that accords well with a binary, globalist cognitive model of class membership and typicality. The authors define a general preferential semantic framework...

  5. The religion of thinness

    Directory of Open Access Journals (Sweden)

    Michelle Lelwica

    2011-01-01

    Full Text Available This paper examines the almost religious-like devotion of especially women in pursuing the goal of a thinner body. The quest for a slender body is analysed as a ‘cultural religion’, which the author calls the ‘Religion of Thinness’. The analysis revolves around four observations. The first is that for many women in the US today, the quest for a slender body serves what has historically been a ‘religious’ function: providing a sense of purpose that orients and gives meaning to their lives, especially in times of suffering and uncertainty. Second, this quest has many features in common with traditional religions, including beliefs, myths, rituals, moral codes, and sacred images—all of which encourage women to find ‘salvation’ (i.e., happiness and well-being through the pursuit of a ‘better’ (i.e., thinner body.Third, this secular faith draws so many adherents in large part because it appeals to and addresses what might be referred to as spiritual needs—including the need for a sense of purpose, inspiration, security, virtue, love, and well-being—even though it shortchanges these needs, and, in the long run, fails to deliver the salvation it promises. Fourth, a number of traditional religious ideas, paradigms and motifs tacit­ly inform and support the Religion of Thinness. More specifically, its soteri­ology resurrects and recycles the misogynist, anti-body, other-worldly, and exclusivist aspects of patriarchal religion. Ultimately, the analysis is not only critical of the Religion of Thinness; it also raises suspicions about any clear-cut divisions between ‘religion’, ‘culture’, and ‘the body’. In fact, examining the functions, features, and ideologies embedded in this secular devotion gives us insight into the constitutive role of the body in the production and apprehension of religious and cultural meanings.

  6. Ultra thin elements in nuclear reactors

    International Nuclear Information System (INIS)

    Ronen, Y.; Shwageraus, E.

    1999-01-01

    There is a growing interest (14) in using 242m Am as a nuclear fuel. The advantages of 242m Am as a nuclear fuel derive from the fact that 242m Am has the highest thermal fission cross section. The thermal capture cross section is relatively low and the number of neutrons per thermal fission is high. These nuclear properties make it possible to obtain nuclear criticality with ultra thin fuel elements. The possibility of having ultra thin fuel elements enables the use of these fission products directly, without the necessity of converting their energy to heat, as is done in conventional reactors. There are three options of using such highly energetic and highly ionized fission products: a. Using the fission products themselves for ionic propulsion. b. Using the fission products in an MHD generator, in order to obtain electricity directly. c. Using the fission products to heat a gas up to a high temperature for propulsion purposes. n this work we are not dealing with a specific reactor design, but only calculating the minimal fuel elements' thickness and the energy of the fission products emerging from these fuel elements. Our reactor is composed of an ultra thin fuel element and a Be O moderator on both sides, a unit cell is composed from 242m Am fuel and 20 cm of Be O as the moderator on both sides of the fuel element. The geometry is an infinite slab one. The criticality (k α = 1) calculations were performed with the one-dimensional unit cell calculation code BOXER (9). The neutron spectrum was calculated in 70 energy groups and transport calculations were performed in 36 energy groups. The results obtained are ultra thin fuel elements of 2.5μ (2.5 x 10 -6 m). In a more practical design, a working volume must be introduced. As a result, we will have two layers of fuel, each about 1.25 μ (1.25 x 10 -6 m). With such a thin fuel, many of these fission products can reach the working zone

  7. Dynamics of a spreading thin film with gravitational counterflow ...

    Indian Academy of Sciences (India)

    ... Refresher Courses · Symposia · Live Streaming. Home; Journals; Sadhana; Volume 40; Issue 3. Dynamics of a spreading thin film with gravitational counterflow using slip model. Naveen Tiwari. Section II - International Union of Theoretical and Applied Mechanics (IUTAM) Volume 40 Issue 3 May 2015 pp 1023-1031 ...

  8. Torsional vibration of thin-walled elastic beams with doubly ...

    African Journals Online (AJOL)

    In this paper, the problem of analyzing the torsional vibration of thin-walled elastic beams, with open cross-sections that are doubly symmetric and traversed by moving concentrated masses at constant speeds is addressed. The mathematical model adopted accounts for both the gravitational and inertial effects of the ...

  9. Some observations from radiometric '8 bit' data of sediment thin ...

    Indian Academy of Sciences (India)

    This paper deals with the experiment of sediment microstructure analysis especially microfabric mapping by digital imaging. For that purpose the greyscale images (Red band from RGB com- bination) of the thin sections have been prepared from the selected 12 samples. The basis of this mapping is the reflectance capacity ...

  10. Template for safety reports with descriptive example

    International Nuclear Information System (INIS)

    1995-12-01

    This report provides a template for future safety reports on long-term safety in support of important decisions and permit applications in connection with the construction of a deep repository system. The template aims at providing a uniform structure for describing long-term safety, after the repository has been closed and sealed. The availability of such a structure will simplify both preparation and review of the safety reports, and make it possible to follow how safety assessments are influenced by the progressively more detailed body of data that emerges. A separate section containing 'descriptive examples' has been appended to the template. This section illustrates what the different chapters of the template should contain. 279 refs

  11. Template for safety reports with descriptive example

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    This report provides a template for future safety reports on long-term safety in support of important decisions and permit applications in connection with the construction of a deep repository system. The template aims at providing a uniform structure for describing long-term safety, after the repository has been closed and sealed. The availability of such a structure will simplify both preparation and review of the safety reports, and make it possible to follow how safety assessments are influenced by the progressively more detailed body of data that emerges. A separate section containing `descriptive examples` has been appended to the template. This section illustrates what the different chapters of the template should contain. 279 refs.

  12. Detector Description Framework in LHCb

    CERN Document Server

    Ponce, Sébastien

    2003-01-01

    The Gaudi architecture and framework are designed to provide a common infrastructure and environment for simulation, filtering, reconstruction and analysis applications. In this context, a Detector Description Service was developed in LHCb in order to also provide easy and coherent access to the description of the experimental apparatus. This service centralizes every information about the detector, including geometry, materials, alignment, calibration, structure and controls. From the proof of concept given by the first functional implementation of this service late 2000, the Detector Description Service has grown and has become one of the major components of the LHCb software, shared among all applications, including simulation, reconstruction, analysis and visualization. We describe here the full and functional implementation of the service. We stress the easiness of customization and extension of the detector description by the user, on the seamless integration with condition databases in order to handle ...

  13. Allotropic effects on the energy loss of swift H+ and He+ ion beams through thin foils

    International Nuclear Information System (INIS)

    Garcia-Molina, Rafael; Abril, Isabel; Denton, Cristian D.; Heredia-Avalos, Santiago

    2006-01-01

    We have developed a theoretical treatment and a simulation code to study the energy loss of swift H + and He + ion beams interacting with thin foils of different carbon allotropes. The former is based on the dielectric formalism, and the latter combines Monte Carlo with the numerical solution of the motion equation for each projectile to describe its trajectory and interactions through the target. The capabilities of both methods are assessed by the reasonably good agreement between their predictions and the experimental results, for a wide range of projectile energies and target characteristics. Firstly, we apply the theoretical procedure to calculate the stopping cross sections for H + and He + beams in foils of different allotropic forms of carbon (such as diamond, graphite, amorphous carbon, glassy carbon and C 60 -fullerite), as a function of the projectile energy. We take into account the electronic structure of the projectile, as well as the different charge states it can acquire, the energy loss associated to the electronic capture and loss processes, the polarization of the projectile, and a realistic description of the target. On the other hand, the simulation code is used to evaluate the energy distributions of swift H + and He + ion beams when traversing several foils of the above mentioned allotropic forms of carbon, in order to analyze the influence of the chemical and physical state of the target in the projectile energy loss. These allotropic effects are found to become more important around the maximum of the stopping cross-section

  14. Learning unit: Thin lenses

    Science.gov (United States)

    Nita, L.-S.

    2012-04-01

    Learning unit: Thin lenses "Why objects seen through lenses are sometimes upright and sometimes reversed" Nita Laura Simona National College of Arts and Crafts "Constantin Brancusi", Craiova, Romania 1. GEOMETRIC OPTICS. 13 hours Introduction (models, axioms, principles, conventions) 1. Thin lenses (Types of lenses. Defining elements. Path of light rays through lenses. Image formation. Required physical quantities. Lens formulas). 2. Lens systems (Non-collated lenses. Focalless systems). 3. Human eye (Functioning as an optical system. Sight defects and their corrections). 4. Optical instruments (Characteristics exemplified by a magnifying glass. Paths of light rays through a simplified photo camera. Path of light rays through a classical microscope) (Physics curriculum for the IXth grade/ 2011). This scenario exposes a learning unit based on experimental sequences (defining specific competencies), as a succession of lessons started by noticing a problem whose solution assumes the setup of an experiment under laboratory conditions. Progressive learning of theme objectives are realised with sequential experimental steps. The central cognitive process is the induction or the generalization (development of new knowledge based on observation of examples or counterexamples of the concept to be learnt). Pupil interest in theme objectives is triggered by problem-situations, for example: "In order to better see small objects I need a magnifying glass. But when using a magnifier, small object images are sometimes seen upright and sometimes seen reversed!" Along the way, pupils' reasoning will converge to the idea: "The image of an object through a lens depends on the relative distances among object, lens, and observer". Associated learning model: EXPERIMENT Specific competencies: derived from the experiment model, in agreement with the following learning unit steps I. Evoking - Anticipation: Size of the problem, formulation of hypotheses and planning of experiment. II

  15. Interfaces and thin films physics

    International Nuclear Information System (INIS)

    Equer, B.

    1988-01-01

    The 1988 progress report of the Interfaces and Thin Film Physics laboratory (Polytechnic School France) is presented. The research program is focused on the thin films and on the interfaces of the amorphous semiconductor materials: silicon and silicon germanium, silicon-carbon and silicon-nitrogen alloys. In particular, the following topics are discussed: the basic processes and the kinetics of the reactive gas deposition, the amorphous materials manufacturing, the physico-chemical characterization of thin films and interfaces and the electron transport in amorphous semiconductors. The construction and optimization of experimental devices, as well as the activities concerning instrumentation, are also described [fr

  16. Insect Thin Films as Sun Blocks, Not Solar Collectors

    Science.gov (United States)

    Koon, Daniel W.; Crawford, Andrew B.

    2000-05-01

    We measured the visible reflectance spectra of whole wing sections from three species of iridescent butterflies and moths, for normal incidence, integrated over all reflected angles. In this manner, we separated the optics of the thin films causing the iridescence from the optics of the rest of the scale. We found that iridescence reduces solar absorption by the wing in all cases, typically by approximately 20% or less, in contrast to claims by Miaoulis and Heilman Ann. Entomol. Soc. Am. 91, 122 (1998) that the thin-film structures that produce iridescence act as solar collectors.

  17. Deposition techniques for the preparation of thin film nuclear targets

    International Nuclear Information System (INIS)

    Muggleton, A.H.F.

    1987-07-01

    This review commences with a brief description of the basic principles that regulate vacuum evaporation and the physical processes involved in thin film formation, followed by a description of the experimental methods used. The principle methods of heating the evaporant are detailed and the means of measuring and controlling the film thickness are elucidated. Types of thin film nuclear targets are considered and various film release agents are listed. Thin film nuclear target behaviour under ion-bombardment is described and the dependence of nuclear experimental results upon target thickness and uniformity is outlined. Special problems associated with preparing suitable targets for lifetime measurements are discussed. The causes of stripper-foil thickening and breaking under heavy-ion bombardment are considered. A comparison is made between foils manufactured by a glow discharge process and those produced by vacuum sublimation. Consideration is given to the methods of carbon stripper-foil manufacture and to the characteristics of stripper-foil lifetimes are considered. Techniques are described that have been developed for the fabrication of special targets, both from natural and isotopically enriched material, and also of elements that are either chemically unstable, or thermally unstable under irradiation. The reduction of metal oxides by the use of hydrogen or by utilising a metallothermic technique, and the simultaneous evaporation of reduced rare earth elements is described. A comprehensive list of the common targets is presented

  18. Characterization of organic thin films

    CERN Document Server

    Ulman, Abraham; Evans, Charles A

    2009-01-01

    Thin films based upon organic materials are at the heart of much of the revolution in modern technology, from advanced electronics, to optics to sensors to biomedical engineering. This volume in the Materials Characterization series introduces the major common types of analysis used in characterizing of thin films and the various appropriate characterization technologies for each. Materials such as Langmuir-Blodgett films and self-assembled monolayers are first introduced, followed by analysis of surface properties and the various characterization technologies used for such. Readers will find detailed information on: -Various spectroscopic approaches to characterization of organic thin films, including infrared spectroscopy and Raman spectroscopy -X-Ray diffraction techniques, High Resolution EELS studies, and X-Ray Photoelectron Spectroscopy -Concise Summaries of major characterization technologies for organic thin films, including Auger Electron Spectroscopy, Dynamic Secondary Ion Mass Spectrometry, and Tra...

  19. Thin, Flexible IMM Solar Array

    Science.gov (United States)

    Walmsley, Nicholas

    2015-01-01

    NASA needs solar arrays that are thin, flexible, and highly efficient; package compactly for launch; and deploy into large, structurally stable high-power generators. Inverted metamorphic multijunction (IMM) solar cells can enable these arrays, but integration of this thin crystalline cell technology presents certain challenges. The Thin Hybrid Interconnected Solar Array (THINS) technology allows robust and reliable integration of IMM cells into a flexible blanket comprising standardized modules engineered for easy production. The modules support the IMM cell by using multifunctional materials for structural stability, shielding, coefficient of thermal expansion (CTE) stress relief, and integrated thermal and electrical functions. The design approach includes total encapsulation, which benefits high voltage as well as electrostatic performance.

  20. Linking descriptive geology and quantitative machine learning through an ontology of lithological concepts

    Science.gov (United States)

    Klump, J. F.; Huber, R.; Robertson, J.; Cox, S. J. D.; Woodcock, R.

    2014-12-01

    Despite the recent explosion of quantitative geological data, geology remains a fundamentally qualitative science. Numerical data only constitute a certain part of data collection in the geosciences. In many cases, geological observations are compiled as text into reports and annotations on drill cores, thin sections or drawings of outcrops. The observations are classified into concepts such as lithology, stratigraphy, geological structure, etc. These descriptions are semantically rich and are generally supported by more quantitative observations using geochemical analyses, XRD, hyperspectral scanning, etc, but the goal is geological semantics. In practice it has been difficult to bring the different observations together due to differing perception or granularity of classification in human observation, or the partial observation of only some characteristics using quantitative sensors. In the past years many geological classification schemas have been transferred into ontologies and vocabularies, formalized using RDF and OWL, and published through SPARQL endpoints. Several lithological ontologies were compiled by stratigraphy.net and published through a SPARQL endpoint. This work is complemented by the development of a Python API to integrate this vocabulary into Python-based text mining applications. The applications for the lithological vocabulary and Python API are automated semantic tagging of geochemical data and descriptions of drill cores, machine learning of geochemical compositions that are diagnostic for lithological classifications, and text mining for lithological concepts in reports and geological literature. This combination of applications can be used to identify anomalies in databases, where composition and lithological classification do not match. It can also be used to identify lithological concepts in the literature and infer quantitative values. The resulting semantic tagging opens new possibilities for linking these diverse sources of data.

  1. Distortional Mechanics of Thin-Walled Structural Elements

    DEFF Research Database (Denmark)

    Andreassen, Michael Joachim

    In several industries such as civil, mechanical, and aerospace, thin-walled structures are often used due to the high strength and effective use of the materials. Because of the increased consumption there has been increasing focus on optimizing and more detailed calculations. However, finely...... number of degrees of freedom. This means that the classical Vlasov thin-walled beam theory for open and closed cross sections is generalized as part of a semi-discretization process by including distortional displacement fields. A novel finite-element-based displacement approach is used in combination...... by discretization of the cross section are now solved analytically and the formulation is valid without special attention and approximation also for closed single or multi-cell cross sections. Furthermore, the found eigenvalues have clear mechanical meaning, since they represent the attenuation of the distortional...

  2. Waste receiving and processing plant control system; system design description

    International Nuclear Information System (INIS)

    LANE, M.P.

    1999-01-01

    The Plant Control System (PCS) is a heterogeneous computer system composed of numerous sub-systems. The PCS represents every major computer system that is used to support operation of the Waste Receiving and Processing (WRAP) facility. This document, the System Design Description (PCS SDD), includes several chapters and appendices. Each chapter is devoted to a separate PCS sub-system. Typically, each chapter includes an overview description of the system, a list of associated documents related to operation of that system, and a detailed description of relevant system features. Each appendice provides configuration information for selected PCS sub-systems. The appendices are designed as separate sections to assist in maintaining this document due to frequent changes in system configurations. This document is intended to serve as the primary reference for configuration of PCS computer systems. The use of this document is further described in the WRAP System Configuration Management Plan, WMH-350, Section 4.1

  3. Waste receiving and processing plant control system; system design description

    Energy Technology Data Exchange (ETDEWEB)

    LANE, M.P.

    1999-02-24

    The Plant Control System (PCS) is a heterogeneous computer system composed of numerous sub-systems. The PCS represents every major computer system that is used to support operation of the Waste Receiving and Processing (WRAP) facility. This document, the System Design Description (PCS SDD), includes several chapters and appendices. Each chapter is devoted to a separate PCS sub-system. Typically, each chapter includes an overview description of the system, a list of associated documents related to operation of that system, and a detailed description of relevant system features. Each appendice provides configuration information for selected PCS sub-systems. The appendices are designed as separate sections to assist in maintaining this document due to frequent changes in system configurations. This document is intended to serve as the primary reference for configuration of PCS computer systems. The use of this document is further described in the WRAP System Configuration Management Plan, WMH-350, Section 4.1.

  4. Standarized input for Hanford environmental impact statements. Part II: site description

    Energy Technology Data Exchange (ETDEWEB)

    Jamison, J.D.

    1982-07-01

    Information is presented under the following section headings: summary description; location and physiography; geology; seismology; hydrology; meteorology; ecology; demography and land use; and radiological condition. Five appendixes are included on the 100N, 200 east, 200 west, 300, and 400 areas. This report is intended to provide a description of the Hanford Site against which the environmental impacts of new projects at Hanford can be assessed. It is expected that the summary description amplified with material from the appropriate appendix, will serve as the basic site description section of environmental impact statements prepared to address the requirements of the National Environmental Policy Act (NEPA).

  5. Multimorbidity in a large district hospital: A descriptive cross ...

    African Journals Online (AJOL)

    Multimorbidity in a large district hospital: A descriptive cross-sectional study. S Roche, E de Vries. Abstract. Background. There is substantial research documenting the burden of disease globally and in the South African (SA) primary care context. Few studies address the disease profile and its implications in the SA hospital ...

  6. CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT

    International Nuclear Information System (INIS)

    Beesley. J.F.

    2005-01-01

    The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process

  7. CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    J.F. Beesley

    2005-04-21

    The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process.

  8. Fuel Handling Facility Description Document

    International Nuclear Information System (INIS)

    M.A. LaFountain

    2005-01-01

    The purpose of the facility description document (FDD) is to establish the requirements and their bases that drive the design of the Fuel Handling Facility (FHF) to allow the design effort to proceed to license application. This FDD is a living document that will be revised at strategic points as the design matures. It identifies the requirements and describes the facility design as it currently exists, with emphasis on design attributes provided to meet the requirements. This FDD was developed as an engineering tool for design control. Accordingly, the primary audience and users are design engineers. It leads the design process with regard to the flow down of upper tier requirements onto the facility. Knowledge of these requirements is essential to performing the design process. It trails the design with regard to the description of the facility. This description is a reflection of the results of the design process to date

  9. Description du langage scientifique (Description of Scientific Language)

    Science.gov (United States)

    Widdowson, H. G.

    1977-01-01

    A description of scientific language using three approaches: text, textualization, and discourse. Scientific discourse is analogous to universal deep structure; text, to surface variations in diverse languages; and textualization, to transformational processes. The relationship of the primary and secondary (scientific) cultures and their languages…

  10. Auteur Description: From the Director's Creative Vision to Audio Description

    Science.gov (United States)

    Szarkowska, Agnieszka

    2013-01-01

    In this report, the author follows the suggestion that a film director's creative vision should be incorporated into Audio description (AD), a major technique for making films, theater performances, operas, and other events accessible to people who are blind or have low vision. The author presents a new type of AD for auteur and artistic films:…

  11. Novel patterning of CdS / CdTe thin film with back contacts for ...

    Indian Academy of Sciences (India)

    Murugaiya Sridar Ilango

    2018-03-12

    Mar 12, 2018 ... Patterning of solar cell; thin film; back contact; e-beam lithography. PACS Nos 68.55.–a; 85.40.Hp. 1. Introduction ... So the performance of back contact solar cell is to be tested along with the increased junction area .... 3.1 Descriptive analysis of nanotextured solar cells. The nanopatterned cells have 500 ...

  12. Tunneling probe of fluctuating superconductivity in disordered thin films

    Science.gov (United States)

    Dentelski, David; Frydman, Aviad; Shimshoni, Efrat; Dalla Torre, Emanuele G.

    2018-03-01

    Disordered thin films close to the superconductor-insulator phase transition (SIT) hold the key to understanding quantum phase transition in strongly correlated materials. The SIT is governed by superconducting quantum fluctuations, which can be revealed, for example, by tunneling measurements. These experiments detect a spectral gap, accompanied by suppressed coherence peaks, on both sides of the transition. Here we describe the insulating side in terms of a fluctuating superconducting field with finite-range correlations. We perform a controlled diagrammatic resummation and derive analytic expressions for the tunneling differential conductance. We find that short-range superconducting fluctuations suppress the coherence peaks even in the presence of long-range correlations. Our approach offers a quantitative description of existing measurements on disordered thin films and accounts for tunneling spectra with suppressed coherence peaks.

  13. Geotechnical Description of Mineral Deposits

    Directory of Open Access Journals (Sweden)

    Sasvári Tibor

    1996-06-01

    Full Text Available Performing various mineral deposits extraction methods requires thorough knowledge of the rock masses` geomechanical parameters. In the geotechnical description of mineral deposits there is proposed a methodical approarch at the collection, registration, and evaluation of rock masses` geological properties for geotechnics being applied within the mining industry.

  14. Natural Language Description of Emotion

    Science.gov (United States)

    Kazemzadeh, Abe

    2013-01-01

    This dissertation studies how people describe emotions with language and how computers can simulate this descriptive behavior. Although many non-human animals can express their current emotions as social signals, only humans can communicate about emotions symbolically. This symbolic communication of emotion allows us to talk about emotions that we…

  15. Task descriptions versus use cases

    DEFF Research Database (Denmark)

    Lauesen, Søren; Kuhail, Mohammad Amin

    2011-01-01

    project: Acquire a new system to support a hotline. Among the 15 replies, eight used traditional use cases that specified a dialog between user and system. Seven used a related technique, task description, which specified the customer’s needs without specifying a dialog. It also allowed the analyst...

  16. The geometry description markup language

    International Nuclear Information System (INIS)

    Chytracek, R.

    2001-01-01

    Currently, a lot of effort is being put on designing complex detectors. A number of simulation and reconstruction frameworks and applications have been developed with the aim to make this job easier. A very important role in this activity is played by the geometry description of the detector apparatus layout and its working environment. However, no real common approach to represent geometry data is available and such data can be found in various forms starting from custom semi-structured text files, source code (C/C++/FORTRAN), to XML and database solutions. The XML (Extensible Markup Language) has proven to provide an interesting approach for describing detector geometries, with several different but incompatible XML-based solutions existing. Therefore, interoperability and geometry data exchange among different frameworks is not possible at present. The author introduces a markup language for geometry descriptions. Its aim is to define a common approach for sharing and exchanging of geometry description data. Its requirements and design have been driven by experience and user feedback from existing projects which have their geometry description in XML

  17. Marketing and Merchandising, Course Description.

    Science.gov (United States)

    Boyer, Jerome L.; Anderson, Floyd L.

    This course description was developed by educators for use at the Work Opportunity Center which was established to teach high school dropouts and/or hard-core unemployed youth. The ultimate objectives of the marketing and merchandising curriculum are to prepare students for careers in distribution and to assist them in graduating from high school.…

  18. Use cases versus task descriptions

    DEFF Research Database (Denmark)

    Lauesen, Søren; Kuhail, Mohammad Amin

    2011-01-01

    to specify require-ments for the same project: Acquire a new system to support a hotline. [Princi-pal ideas/results] Among the 15 replies, eight used traditional use cases that specified a dialog between users and system. Seven used a related technique, task description, which specified the customer's needs...

  19. Epsilon. A System Description Language

    DEFF Research Database (Denmark)

    Jensen, Kurt; Kyng, Morten

    This paper discusses the use of Petri nets as a semantic tool in the design of languages and in the construction and analysis of system descriptions. The topics treated are: -- Languages based on nets. -- The problem of time in nets. -- Nets and related models. -- Nets and formal semantics...

  20. A curved finite element for general thin shell structures

    International Nuclear Information System (INIS)

    Jones, R.F. Jr.

    1978-01-01

    This work describes the development of a curved quadrilateral shell finite element which demonstrates very good convergence properties. A general description is used in deriving the element so that it may be applied to any thin shell problem. The element is shown to be very efficient. It has a total of 36 degrees-of-freedom with 9 at each of the corners of the element. There are several distinct advantages that the element offers for practical applications. Most of the shell elements that have been presented in the past are limited to problems in which the coordinates on the shell surface are orthogonal. The element that is described in the paper is derived using a general description so that it may be applied to any thin shell problem including those in which the shell coordinates are not orthogonal. The degree-of-freedom at each of the four nodes are the three Cartesian displacements and their first derivatives with respect to the two surface coordinates. The imposition of boundary conditions is simplified since each of the degrees-of-freedom can be can be associated with a quantity which has a simple physical meaning. During the course of the derivation of the element, the strain displacement relationships are derived in a very simple manner consistent with Love's first approximation for thin shells. The derivation in the paper starts from basic principles and should help to shed some light on the proper form for the bending strain. Two primary contributions are presented in this work. The first is the presentation of a procedure for the development of a general quadrilateral shell element. The second is the simple derivation of the bending strain for the thin shells which apparently has not been presented previously. (Auth.)

  1. Descriptions of membrane mechanics from microscopic and effective two-dimensional perspectives

    DEFF Research Database (Denmark)

    Lomholt, Michael Andersen; Miao, L.

    2006-01-01

    Mechanics of fluid membranes may be described in terms of the concepts of mechanical deformations and stresses or in terms of mechanical free-energy functions. In this paper, each of the two descriptions is developed by viewing a membrane from two perspectives: a microscopic perspective, in which...... the membrane appears as a thin layer of finite thickness and with highly inhomogeneous material and force distributions in its transverse direction, and an effective, two-dimensional perspective, in which the membrane is treated as an infinitely thin surface, with effective material and mechanical properties...

  2. Method for histological preparation of bone sections containing titanium implants.

    Science.gov (United States)

    Hipp, J A; Brunski, J B; Cochran, G V

    1987-07-01

    A thin sectioning technique involving hand grinding has been developed to produce 20-40-microns-thick sections of bone-titanium implant sites. Components include: 1) surface staining of sections prior to mounting on slides so bone labels (oxytetracycline-HCl and 2,4-bis(N,N-dicarbomethyl)aminomethylfluorescein (DCAF] can be seen in sections viewed with transmitted light, 2) a pneumatic sample press for bonding sections to slides with a thin, uniform glue line and without trapped air bubbles, and 3) bonding methyl methacrylate embedded sections to clear acrylic slides with methyl methacrylate monomer to provide enhanced bond strength and grinding properties compared to those obtainable with glass slides. Sample cracking and distortion is minimized and the tissue-implant interface can be kept intact. The expense of start-up equipment for this technique is minimal.

  3. Dielectric loss of strontium titanate thin films

    Science.gov (United States)

    Dalberth, Mark Joseph

    1999-12-01

    Interest in strontium titanate (STO) thin films for microwave device applications continues to grow, fueled by the telecommunications industry's interest in phase shifters and tunable filters. The optimization of these devices depends upon increasing the phase or frequency tuning and decreasing the losses in the films. Currently, the dielectric response of thin film STO is poorly understood through lack of data and a theory to describe it. We have studied the growth of STO using pulsed laser deposition and single crystal substrates like lanthanum aluminate and neodymium gallate. We have researched ways to use ring resonators to accurately measure the dielectric response as a function of temperature, electric field, and frequency from low radio frequencies to a few gigahertz. Our films grown on lanthanum aluminate show marked frequency dispersion in the real part of the dielectric constant and hints of thermally activated loss behavior. We also found that films grown with conditions that optimized the dielectric constant showed increased losses. In an attempt to simplify the system, we developed a technique called epitaxial lift off, which has allowed us to study films removed from their growth substrates. These free standing films have low losses and show obvious thermally activated behavior. The "amount of tuning," as measured by a figure of merit, KE, is greater in these films than in the films still attached to their growth substrates. We have developed a theory that describes the real and imaginary parts of the dielectric constant. The theory models the real part using a mean field description of the ionic motion in the crystal and includes the loss by incorporating the motion of charged defects in the films.

  4. Reduction of cross section area at fracture in tensile test: measurement and applications for flat sheet steels

    Science.gov (United States)

    Larour, P.; Freudenthaler, J.; Weissböck, T.

    2017-09-01

    This contribution deals with the use of maximum thinning and reduction of sample cross section area at fracture after tensile testing and applications for industrial flat sheet steels. Although included in all usual tensile testing standards, this mechanical property (“Z-value”) has long been neglected for flat sheet materials. It happens however to include some most valuable information on local ductility at fracture of sheet steels. This is increasingly needed for a more suitable description and ranking of newly developed advanced high strength sheet steels with regard to local ductility (stretch-flangeability, bendability, crash-ability) versus global ductility (deep-drawability). It is shown in this investigation that the ISO16630 punched and milled hole expansion ratio correlates linearly with the relative thickness reduction at fracture. A classification of cold rolled AHSS-UHSS sheet steels is attempted by plotting the relative thickness & area reduction at fracture vs. uniform and fracture elongation.

  5. Radiation sensitivity of graphene field effect transistors and other thin film architectures

    Science.gov (United States)

    Cazalas, Edward

    An important contemporary motivation for advancing radiation detection science and technology is the need for interdiction of nuclear and radiological materials, which may be used to fabricate weapons of mass destruction. The detection of such materials by nuclear techniques relies on achieving high sensitivity and selectivity to X-rays, gamma-rays, and neutrons. To be attractive in field deployable instruments, it is desirable for detectors to be lightweight, inexpensive, operate at low voltage, and consume low power. To address the relatively low particle flux in most passive measurements for nuclear security applications, detectors scalable to large areas that can meet the high absolute detection efficiency requirements are needed. Graphene-based and thin-film-based radiation detectors represent attractive technologies that could meet the need for inexpensive, low-power, size-scalable detection architectures, which are sensitive to X-rays, gamma-rays, and neutrons. The utilization of graphene to detect ionizing radiation relies on the modulation of graphene charge carrier density by changes in local electric field, i.e. the field effect in graphene. Built on the principle of a conventional field effect transistor, the graphene-based field effect transistor (GFET) utilizes graphene as a channel and a semiconducting substrate as an absorber medium with which the ionizing radiation interacts. A radiation interaction event that deposits energy within the substrate creates electron-hole pairs, which modify the electric field and modulate graphene charge carrier density. A detection event in a GFET is therefore measured as a change in graphene resistance or current. Thin (micron-scale) films can also be utilized for radiation detection of thermal neutrons provided nuclides with high neutron absorption cross section are present with appreciable density. Detection in thin-film detectors could be realized through the collection of charge carriers generated within the

  6. Experimental High Speed Milling of the Selected Thin-Walled Component

    Directory of Open Access Journals (Sweden)

    Jozef Zajac

    2017-11-01

    Full Text Available In a technical practice, it is possible to meet thin-walled parts more and more often. These parts are most commonly used in the automotive industry or aircraft industry to reduce the weight of different design part of cars or aircraft. Presented article is focused on experimental high speed milling of selected thin-walled component. The introduction of this article presents description of high speed machining and specification of thin – walled parts. The experiments were carried out using a CNC machine Pinnacle VMC 650S and C45 material - plain carbon steel for automotive components and mechanical engineering. In the last part of the article, described are the arrangements to reduction of deformation of thin-walled component during the experimental high speed milling.

  7. CRACUK model description (appendices to the CRAC2 model description)

    International Nuclear Information System (INIS)

    Nixon, W.; Egan, M.J.

    1986-08-01

    The CRACUK computer code is a revised version of the US consequence modelling code CRAC2, adapted to suit UK requirements. The revisions include modifications to the models for spatial interval representation, weather sequence sampling, atmospheric dispersion, dosimetry and countermeasures. This document describes, in the form of appendices to the CRAC2 model description, each of the revisions made to the original model which collectively distinguish CRACUK from CRAC2. (author)

  8. Section of Atomic Collisions

    International Nuclear Information System (INIS)

    Berenyi, D.; Biri, S.; Gulyas, L.; Juhasz, Z.; Kover, A.; Orban, A.; Palinkas, J.; Papp, T.; Racz, R.; Ricz, S.

    2009-01-01

    emission from H 2 by fast ion impact; Fast electron ejection in slow and intermediate velocity ion-atom collisions: Fermi-shuttle type pingpong games in single ionization; Fragmentation of biologically relevant molecules in collisions with ions; Guiding of highly charged ions through insulating nanocapillaries; Theoretical description of the atomic collision processes. Summary: We hope that the present selection provides the reader with a flavor of the atomic collision physics research performed in our Section. It is seen that we have a strong interest in fundamental processes. It is also seen that the research work in the field is developing from the basic study of simple systems to different directions. One of them goes towards a deeper understanding of simple systems and fundamental processes. The other direction is the analysis of complex, sometimes strange phenomena, up to the study of mesoscopic effects governed by atomic collision processes. Moreover, new experimental facilities and possibilities (e.g., the availability of antiparticles) are always a challenge to start into a new direction. Finally, as our community gets better equipped for handling complex problems, we are turning to study systems, which are related to applied sciences and direct applications. We believe that these are all natural ways to find the future of the field of atomic collision physics.

  9. Squirming through shear thinning fluids

    Science.gov (United States)

    Datt, Charu; Zhu, Lailai; Elfring, Gwynn J.; Pak, On Shun

    2015-11-01

    Many microorganisms find themselves surrounded by fluids which are non-Newtonian in nature; human spermatozoa in female reproductive tract and motile bacteria in mucosa of animals are common examples. These biological fluids can display shear-thinning rheology whose effects on the locomotion of microorganisms remain largely unexplored. Here we study the self-propulsion of a squirmer in shear-thinning fluids described by the Carreau-Yasuda model. The squirmer undergoes surface distortions and utilizes apparent slip-velocities around its surface to swim through a fluid medium. In this talk, we will discuss how the nonlinear rheological properties of a shear-thinning fluid affect the propulsion of a swimmer compared with swimming in Newtonian fluids.

  10. [Obesity and thinness in painting].

    Science.gov (United States)

    Schüller Pérez, Amador

    2004-01-01

    The obesity, serious frequenty sanitary problem, cause of complications that effects to the expectation of life, with aesthetic repercussion and with an increase in the last decades. Admitted the obesity android, gynoide, central or abdominal, wide aesthetic repercussion and physiopathologic like hyperdislipemias, metabolic alterations (diabetes mellitus, etc...), arterial hypertension, column arthrosis and outlying. Ethiopathologics co-factors, sedentariness, genotypic predisposition, endocrine alterations and of the leptina secretion. Illustrative cases of obesity in the painting of those that characteristic models are exposed, from slight grades to intense affecting to both genders. The thinness counterpoint of the obesity, multicausal process, less frequent than the obesity with aesthetic and psychological repercussion. It is the formed aesthetic thinness to the diverse types physiopathologic, without forgetting the constitutional and family form and the anorexy, the serial ones to disasters, wars, famines, etc..., the mystic thinness of saints and ascetics, and the serial one to consuming processes.

  11. Fracture toughness of thin specimen

    International Nuclear Information System (INIS)

    Machida, Kenji; Kikuchi, Masanori; Miyamoto, Hiroshi

    1991-01-01

    Three-dimensional elastic-plastic analyses were carried out on 1 and 2 mm-thick CCT specimens with or without side grooves. The valid effective thickness, 0.85 √(B o xB n ), was obtained from the 3-D analyses. The stretched-zone method is better than the R-curve method to determine the J in value of the thin specimen. However, a great many data should be gathered near the J in value. The J in value obtained using side-grooved specimens is always lower than that of non-side-grooved specimens. Considering the difficulty of machining the side groove, the side groove is not appropriate for the thin specimen. As the thickness decreases, the J in value decreases. However, it is possible to estimate the J ic value from the J in value obtained using thin CCT specimens. (author)

  12. Advanced Transport Operating System (ATOPS) control display unit software description

    Science.gov (United States)

    Slominski, Christopher J.; Parks, Mark A.; Debure, Kelly R.; Heaphy, William J.

    1992-01-01

    The software created for the Control Display Units (CDUs), used for the Advanced Transport Operating Systems (ATOPS) project, on the Transport Systems Research Vehicle (TSRV) is described. Module descriptions are presented in a standardized format which contains module purpose, calling sequence, a detailed description, and global references. The global reference section includes subroutines, functions, and common variables referenced by a particular module. The CDUs, one for the pilot and one for the copilot, are used for flight management purposes. Operations performed with the CDU affects the aircraft's guidance, navigation, and display software.

  13. One of Us: Multilevel Models Examining the Impact of Descriptive Representation on Civic Engagement

    OpenAIRE

    Norris, Pippa; Krook, Mona Lena

    2009-01-01

    This paper examines the impact of descriptive representation in comparative perspective. The goals are to establish (1) whether descriptive representation mobilizes attitudinal and behavioral indicators of civic engagement; (2) whether the strength of any such relationship differs for women and young people; and (3) whether this relationship is evident cross-nationally. The first section provides an overview of existing research on descriptive representation and the civic engagement of women ...

  14. Scattering of elastic waves by thin inclusions

    International Nuclear Information System (INIS)

    Simons, D.A.

    1980-01-01

    A solution is derived for the elastic waves scattered by a thin inclusion. The solution is asymptotically valid as inclusion thickness tends to zero with the other dimensions and the frequency fixed. The method entails first approximating the total field in the inclusion in terms of the incident wave by enforcing the appropriate continuity conditions on traction and displacement across the interface, then using these displacements and strains in the volume integral that gives the scattered field. Expressions are derived for the far-field angular distributions of P and S waves due to an incident plane P wave, and plots are given for normalized differential cross sections of an oblate spheroidal tungsten carbide inclusion in a titanium matrix

  15. Electrical resistivity of thin metal films

    CERN Document Server

    Wissmann, Peter

    2007-01-01

    The aim of the book is to give an actual survey on the resistivity of thin metal and semiconductor films interacting with gases. We discuss the influence of the substrate material and the annealing treatment of the films, presenting our experimental data as well as theoretical models to calculate the scattering cross section of the conduction electrons in the frame-work of the scattering hypothesis. Main emphasis is laid on the comparison of gold and silver films which exhibit nearly the same lattice structure but differ in their chemical activity. In conclusion, the most important quantity for the interpretation is the surface charging z while the correlation with the optical data or the frustrated IR vibrations seems the show a more material-specific character. Z can be calculated on the basis of the density functional formalism or the self-consistent field approximation using Mulliken’s population analysis.

  16. Continuum description for jointed media

    International Nuclear Information System (INIS)

    Thomas, R.K.

    1982-04-01

    A general three-dimensional continuum description is presented for a material containing regularly spaced and approximately parallel jointing planes within a representative elementary volume. Constitutive relationships are introduced for linear behavior of the base material and nonlinear normal and shear behavior across jointing planes. Furthermore, a fracture permeability tensor is calculated so that deformation induced alterations to the in-situ values can be measured. Examples for several strain-controlled loading paths are presented

  17. GROUNDWATER PROTECTION MANAGEMENT PROGRAM DESCRIPTION.

    Energy Technology Data Exchange (ETDEWEB)

    PAQUETTE,D.E.; BENNETT,D.B.; DORSCH,W.R.; GOODE,G.A.; LEE,R.J.; KLAUS,K.; HOWE,R.F.; GEIGER,K.

    2002-05-31

    THE DEPARTMENT OF ENERGY ORDER 5400.1, GENERAL ENVIRONMENTAL PROTECTION PROGRAM, REQUIRES THE DEVELOPMENT AND IMPLEMENTATION OF A GROUNDWATER PROTECTION PROGRAM. THE BNL GROUNDWATER PROTECTION MANAGEMENT PROGRAM DESCRIPTION PROVIDES AN OVERVIEW OF HOW THE LABORATORY ENSURES THAT PLANS FOR GROUNDWATER PROTECTION, MONITORING, AND RESTORATION ARE FULLY DEFINED, INTEGRATED, AND MANAGED IN A COST EFFECTIVE MANNER THAT IS CONSISTENT WITH FEDERAL, STATE, AND LOCAL REGULATIONS.

  18. Description of fiction in Wikipedia

    Directory of Open Access Journals (Sweden)

    Alenka Šauperl

    2010-01-01

    Full Text Available Subject description of fiction in the Slovenian Cooperative On-line Bibliographic Database (COBIB is still inadequate. Participation in COBIB is granted to librarians who have successfully passed the exam. As a consequence, the number of contributing librarians is limited. However, all Slovenian librarians can collaborate in the Slovenian Wikipedia. Slovenian and foreign library science researchers have proposed the structure of subject description of fiction. An analysis of articles describing nine works of fiction in five wikipedias (English, French, Spanish, Croatian and Slovenian has shown new characteristics. Drawing on these findings, a suggestion of an optimal structure is made. An article describing a work of fiction should begin with a general introductory statement comprising the name of the author, his/her nationality and genre.Translators and original title should be written if a translation is presented. Illustrators and other contributors, the background and other specific information on the work should be added if relevant. The main body of the text should be structured in the following chapters: 1 contents, 2 collection, 3 reviews and awards, 4 editions and translations, 5 adaptations, 6 see also, 7 links and 8 sources. An "infobox: book" with Slovenian adaptation and relevant categories should be inserted. Copying these Wikipedia articles into the library catalogue would enhance subject description and provide better subject access to fiction.

  19. Interfacial Properties of CZTS Thin Film Solar Cell

    Directory of Open Access Journals (Sweden)

    N. Muhunthan

    2014-01-01

    Full Text Available Cu-deficient CZTS (copper zinc tin sulfide thin films were grown on soda lime as well as molybdenum coated soda lime glass by reactive cosputtering. Polycrystalline CZTS film with kesterite structure was produced by annealing it at 500°C in Ar atmosphere. These films were characterized for compositional, structural, surface morphological, optical, and transport properties using energy dispersive X-ray analysis, glancing incidence X-ray diffraction, Raman spectroscopy, scanning electron microscopy, atomic force microscopy, UV-Vis spectroscopy, and Hall effect measurement. A CZTS solar cell device having conversion efficiency of ~0.11% has been made by depositing CdS, ZnO, ITO, and Al layers over the CZTS thin film deposited on Mo coated soda lime glass. The series resistance of the device was very high. The interfacial properties of device were characterized by cross-sectional SEM and cross-sectional HRTEM.

  20. 48 CFR 1910.004-73 - Offer evaluation and award, brand name or equal descriptions.

    Science.gov (United States)

    2010-10-01

    ..., brand name or equal descriptions. 1910.004-73 Section 1910.004-73 Federal Acquisition Regulations System... 1910.004-73 Offer evaluation and award, brand name or equal descriptions. An offer may not be rejected for failure of the offered product to equal a characteristic of a brand name product if it was not...

  1. 48 CFR 811.104 - Use of brand name or equal purchase descriptions.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Use of brand name or equal purchase descriptions. 811.104 Section 811.104 Federal Acquisition Regulations System DEPARTMENT OF... Requirements Documents 811.104 Use of brand name or equal purchase descriptions. ...

  2. 41 CFR 101-29.301-4 - Periodic review of Federal product descriptions.

    Science.gov (United States)

    2010-07-01

    ... PROCUREMENT 29-FEDERAL PRODUCT DESCRIPTIONS 29.3-Responsibilities § 101-29.301-4 Periodic review of Federal... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Periodic review of Federal product descriptions. 101-29.301-4 Section 101-29.301-4 Public Contracts and Property Management...

  3. 40 CFR 415.40 - Applicability; description of the calcium chloride production subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the calcium chloride production subcategory. 415.40 Section 415.40 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Calcium Chloride Production Subcategory § 415.40 Applicability; description of the...

  4. 40 CFR 465.40 - Applicability; description of the canmaking subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Applicability; description of the canmaking subcategory. 465.40 Section 465.40 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY....40 Applicability; description of the canmaking subcategory. This subpart applies to discharges to...

  5. 40 CFR 407.40 - Applicability; description of the frozen potato products subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the frozen potato products subcategory. 407.40 Section 407.40 Protection of Environment ENVIRONMENTAL... PROCESSING POINT SOURCE CATEGORY Frozen Potato Products Subcategory § 407.40 Applicability; description of...

  6. 40 CFR 471.40 - Applicability; description of the precious metals forming subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Applicability; description of the precious metals forming subcategory. 471.40 Section 471.40 Protection of Environment ENVIRONMENTAL... POINT SOURCE CATEGORY Precious Metals Forming Subcategory § 471.40 Applicability; description of the...

  7. 40 CFR 413.40 - Applicability: Description of the anodizing subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability: Description of the anodizing subcategory. 413.40 Section 413.40 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... § 413.40 Applicability: Description of the anodizing subcategory. The provisions of this subpart apply...

  8. 40 CFR 466.40 - Applicability; description of the copper basis material subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Applicability; description of the copper basis material subcategory. 466.40 Section 466.40 Protection of Environment ENVIRONMENTAL... Copper Basis Material Subcategory § 466.40 Applicability; description of the copper basis material...

  9. 40 CFR 426.40 - Applicability; description of the plate glass manufacturing subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Applicability; description of the plate glass manufacturing subcategory. 426.40 Section 426.40 Protection of Environment ENVIRONMENTAL... Plate Glass Manufacturing Subcategory § 426.40 Applicability; description of the plate glass...

  10. 40 CFR 425.40 - Applicability; description of the retan-wet finish-sides subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Applicability; description of the retan-wet finish-sides subcategory. 425.40 Section 425.40 Protection of Environment ENVIRONMENTAL... CATEGORY Retan-Wet Finish-Sides Subcategory § 425.40 Applicability; description of the retan-wet finish...

  11. 40 CFR 430.40 - Applicability; description of the dissolving sulfite subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Applicability; description of the dissolving sulfite subcategory. 430.40 Section 430.40 Protection of Environment ENVIRONMENTAL PROTECTION... CATEGORY Dissolving Sulfite Subcategory § 430.40 Applicability; description of the dissolving sulfite...

  12. 40 CFR 461.40 - Applicability; description of the Leclanche subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Applicability; description of the Leclanche subcategory. 461.40 Section 461.40 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Subcategory § 461.40 Applicability; description of the Leclanche subcategory. This subpart applies to...

  13. 40 CFR 436.40 - Applicability; description of the industrial sand subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Applicability; description of the industrial sand subcategory. 436.40 Section 436.40 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Sand Subcategory § 436.40 Applicability; description of the industrial sand subcategory. The provisions...

  14. 40 CFR 467.40 - Applicability; description of the forging subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Applicability; description of the forging subcategory. 467.40 Section 467.40 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... § 467.40 Applicability; description of the forging subcategory. This subpart applies to discharges of...

  15. 40 CFR 427.40 - Applicability; description of the asbestos paper (elastomeric binder) subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Applicability; description of the asbestos paper (elastomeric binder) subcategory. 427.40 Section 427.40 Protection of Environment... SOURCE CATEGORY Asbestos Paper (Elastomeric Binder) Subcategory § 427.40 Applicability; description of...

  16. 40 CFR 428.40 - Applicability; description of the latex rubber subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Applicability; description of the latex rubber subcategory. 428.40 Section 428.40 Protection of Environment ENVIRONMENTAL PROTECTION... Rubber Subcategory § 428.40 Applicability; description of the latex rubber subcategory. The provisions of...

  17. 40 CFR 455.40 - Applicability; description of the pesticide formulating, packaging and repackaging subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Applicability; description of the pesticide formulating, packaging and repackaging subcategory. 455.40 Section 455.40 Protection of... Pesticide Chemicals Formulating and Packaging Subcategory § 455.40 Applicability; description of the...

  18. 40 CFR 464.40 - Applicability; description of the zinc casting subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Applicability; description of the zinc casting subcategory. 464.40 Section 464.40 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Subcategory § 464.40 Applicability; description of the zinc casting subcategory. The provisions of this...

  19. 40 CFR 429.40 - Applicability; description of the plywood subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Applicability; description of the plywood subcategory. 429.40 Section 429.40 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Subcategory § 429.40 Applicability; description of the plywood subcategory. This subpart applies to discharges...

  20. 40 CFR 458.40 - Applicability; description of the carbon black lamp process subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Applicability; description of the carbon black lamp process subcategory. 458.40 Section 458.40 Protection of Environment ENVIRONMENTAL... CATEGORY Carbon Black Lamp Process Subcategory § 458.40 Applicability; description of the carbon black lamp...

  1. 40 CFR 420.40 - Applicability; description of the steelmaking subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the steelmaking subcategory. 420.40 Section 420.40 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Subcategory § 420.40 Applicability; description of the steelmaking subcategory. The provisions of this subpart...

  2. 40 CFR 418.40 - Applicability; description of the ammonium nitrate subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the ammonium nitrate subcategory. 418.40 Section 418.40 Protection of Environment ENVIRONMENTAL PROTECTION... Ammonium Nitrate Subcategory § 418.40 Applicability; description of the ammonium nitrate subcategory. The...

  3. 40 CFR 435.40 - Applicability; description of the coastal subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Applicability; description of the coastal subcategory. 435.40 Section 435.40 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Subcategory § 435.40 Applicability; description of the coastal subcategory. The provisions of this subpart are...

  4. 40 CFR 421.40 - Applicability: Description of the primary copper smelting subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability: Description of the primary copper smelting subcategory. 421.40 Section 421.40 Protection of Environment ENVIRONMENTAL... CATEGORY Primary Copper Smelting Subcategory § 421.40 Applicability: Description of the primary copper...

  5. 48 CFR 12.202 - Market research and description of agency need.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Market research and description of agency need. 12.202 Section 12.202 Federal Acquisition Regulations System FEDERAL ACQUISITION... Commercial Items 12.202 Market research and description of agency need. (a) Market research (see 10.001) is...

  6. 48 CFR 312.202(d) - Market research and description of agency need.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Market research and description of agency need. 312.202(d) Section 312.202(d) Federal Acquisition Regulations System HEALTH AND... for the Acquisition of Commercial Items 312.202(d) Market research and description of agency need...

  7. 40 CFR 406.50 - Applicability; description of the normal rice milling subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the normal rice milling subcategory. 406.50 Section 406.50 Protection of Environment ENVIRONMENTAL PROTECTION... Milling Subcategory § 406.50 Applicability; description of the normal rice milling subcategory. The...

  8. 40 CFR 406.30 - Applicability; description of the normal wheat flour milling subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the normal wheat flour milling subcategory. 406.30 Section 406.30 Protection of Environment ENVIRONMENTAL... Wheat Flour Milling Subcategory § 406.30 Applicability; description of the normal wheat flour milling...

  9. 40 CFR 406.20 - Applicability; description of the corn dry milling subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the corn dry milling subcategory. 406.20 Section 406.20 Protection of Environment ENVIRONMENTAL PROTECTION... Subcategory § 406.20 Applicability; description of the corn dry milling subcategory. (a) The provisions of...

  10. 40 CFR 406.10 - Applicability; description of the corn wet milling subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the corn wet milling subcategory. 406.10 Section 406.10 Protection of Environment ENVIRONMENTAL PROTECTION... Subcategory § 406.10 Applicability; description of the corn wet milling subcategory. The provisions of this...

  11. 40 CFR 406.40 - Applicability; description of the bulgur wheat flour milling subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the bulgur wheat flour milling subcategory. 406.40 Section 406.40 Protection of Environment ENVIRONMENTAL... Wheat Flour Milling Subcategory § 406.40 Applicability; description of the bulgur wheat flour milling...

  12. 30 CFR 250.413 - What must my description of well drilling design criteria address?

    Science.gov (United States)

    2010-07-01

    ... drilling design criteria address? Your description of well drilling design criteria must address: (a) Pore... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What must my description of well drilling design criteria address? 250.413 Section 250.413 Mineral Resources MINERALS MANAGEMENT SERVICE...

  13. 40 CFR 427.80 - Applicability; description of the coating or finishing of asbestos textiles subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Applicability; description of the coating or finishing of asbestos textiles subcategory. 427.80 Section 427.80 Protection of Environment... SOURCE CATEGORY Coating or Finishing of Asbestos Textiles Subcategory § 427.80 Applicability; description...

  14. Principles of electron backscattering by solids and thin films

    International Nuclear Information System (INIS)

    Niedrig, H.

    1977-01-01

    The parameters concerning the electron backscattering from thin films and solids (atomic scattering cross-section, atomic number, single/multiple scattering, film thickness of self-supporting films and of surface films on bulk substrates, scattering angular distribution, angle of incidence, diffraction effects) are described. Their influence on some important contrast mechanisms in scanning electron microscopy (thickness contrast, Z/material contrast, tilting/topography contrast, orientation contrast) is discussed. The main backscattering electron detection systems are briefly described. (orig.) [de

  15. 40 CFR 405.110 - Applicability; description of the condensed whey subcategory.

    Science.gov (United States)

    2010-07-01

    ... condensed whey subcategory. 405.110 Section 405.110 Protection of Environment ENVIRONMENTAL PROTECTION... Condensed Whey Subcategory § 405.110 Applicability; description of the condensed whey subcategory. The... whey and condensed acid whey. ...

  16. 40 CFR 415.650 - Applicability; description of the cobalt salts production subcategory.

    Science.gov (United States)

    2010-07-01

    ... cobalt salts production subcategory. 415.650 Section 415.650 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Cobalt Salts Production Subcategory § 415.650 Applicability; description of the cobalt... cobalt salts. ...

  17. 40 CFR 415.400 - Applicability; description of the fluorine production subcategory.

    Science.gov (United States)

    2010-07-01

    ... fluorine production subcategory. 415.400 Section 415.400 Protection of Environment ENVIRONMENTAL PROTECTION... CATEGORY Fluorine Production Subcategory § 415.400 Applicability; description of the fluorine production... fluorine by the liquid hydrofluoric acid electrolysis process. ...

  18. 40 CFR 409.30 - Applicability; description of the liquid cane sugar refining subcategory.

    Science.gov (United States)

    2010-07-01

    ... liquid cane sugar refining subcategory. 409.30 Section 409.30 Protection of Environment ENVIRONMENTAL... Cane Sugar Refining Subcategory § 409.30 Applicability; description of the liquid cane sugar refining... cane sugar into liquid refined sugar. ...

  19. 40 CFR 467.10 - Applicability; description of the rolling with neat oils subcategory.

    Science.gov (United States)

    2010-07-01

    ... rolling with neat oils subcategory. 467.10 Section 467.10 Protection of Environment ENVIRONMENTAL... Rolling With Neat Oils Subcategory § 467.10 Applicability; description of the rolling with neat oils... the rolling with neat oils subcategory. ...

  20. 40 CFR 427.70 - Applicability; description of the asbestos floor tile subcategory.

    Science.gov (United States)

    2010-07-01

    ... asbestos floor tile subcategory. 427.70 Section 427.70 Protection of Environment ENVIRONMENTAL PROTECTION... Asbestos Floor Tile Subcategory § 427.70 Applicability; description of the asbestos floor tile subcategory... manufacture of asbestos floor tile. ...

  1. 40 CFR 415.430 - Applicability; description of the iodine production subcategory.

    Science.gov (United States)

    2010-07-01

    ... iodine production subcategory. 415.430 Section 415.430 Protection of Environment ENVIRONMENTAL PROTECTION... CATEGORY Iodine Production Subcategory § 415.430 Applicability; description of the iodine production... iodine. ...

  2. study in polymer thin films

    Indian Academy of Sciences (India)

    TECS

    carry out a careful study of steady state conduction of poly- styrene (PS) thin film thermo-electrets sandwiched be- tween metal electrodes both in doped and undoped forms. 2. Experimental. 2.1 Sample preparation. Polystyrene supplied by Polymer Chemical Industry,. Mumbai and naphthalene by S.G. Sisco Pvt Ltd., New ...

  3. Capillary thinning of polymeric filaments

    DEFF Research Database (Denmark)

    Kolte, Mette Irene; Szabo, Peter

    1999-01-01

    The capillary thinning of filaments of a Newtonian polybutene fluid and a viscoelastic polyisobutylene solution are analyzed experimentally and by means of numerical simulation. The experimental procedure is as follows. Initially, a liquid sample is placed between two cylindrical plates. Then...

  4. Capillary thinning of polymeric filaments

    DEFF Research Database (Denmark)

    Kolte, Mette Irene; Szabo, Peter; Hassager, Ole

    1998-01-01

    The capillary thinning of a polymeric filament is analysed experimentally as well as by means of numerical simulation. The experimental procedure is as follows. Initially a liquid sample is kept between two cylindrical plates. Then the bottom plate is lowered under gravity to yield a given strain...

  5. A KIRCHHOFF THIN SHELL THEORY,

    Science.gov (United States)

    imposing the principal of virtual work on the calss of deformations which satisfy the Kirchhoff hypotheses, i.e. those deformations which carry normals to...physically realistic unless the shell is in fact thin. Imposing the principal of virtual work yields a system of differential equations for the three

  6. Magnetization in permalloy thin films

    Indian Academy of Sciences (India)

    1VES College of Arts, Science and Commerce, Sindhi Society, Chembur, Mumbai 400 071,. India. 2UGC-DAE Consortium for Scientific Research, R5 Shed, ... gas alone, while PNR measurements on 5 and 10% sample show splitting in the spin-up and spin-down reflectivity. Keywords. Permalloy; NiFe thin films; NiFe ...

  7. Comfort Women in Human Rights Discourse: Fetishized Testimonies, Small Museums, and the Politics of Thin Description

    Science.gov (United States)

    Joo, Hee-Jung Serenity

    2015-01-01

    In the last two decades, the issue of comfort women--the women and girls who were forced into sex slavery for the Japanese army before and during WWII--has risen to global attention. Tens of thousands of comfort women (the average estimate is anywhere between 80,000 and 200,000) were confined at comfort stations managed by the Japanese Imperial…

  8. Total cross sections for pion charge exchange on the proton

    Energy Technology Data Exchange (ETDEWEB)

    Breitschopf, J.

    2006-04-28

    This work describes the measurement of total SCX cross sections employing a new 4{pi} scintillation counter to perform transmission measurements in the incident pion energy range from about 38 to 250 MeV. A small 4{pi} detector box consisting of thin plastic scintillators has been constructed. The transmission technique, which was used, relates the number of transmitted charged pions to that of incident beam pions and this way effectively counts events with neutral products. The incoming negative pions were counted by three beam defining counters before they hit a target of very well known size and chemical composition. The target was placed in the box detector which was not sensitive to the neutral particles resulting from the SCX. The total cross section for emerging neutral particles was derived from the comparison of the numbers of the incoming and transmitted charged particles. The total SCX cross section on hydrogen was derived from the transmissions of a CH{sub 2} target, a carbon target and an empty target. For a detailed offline analysis all TDC, QDC and FADC information was recorded in an event by event mode for each triggered beam event. Various corrections had to be applied to the data, such as random correction, the detection of neutrals in the detector, Dalitz decay, pion decay and the radiative pion capture. This measurement covers, as the only experiment, the whole {delta}-resonance and the sp-interference region in one single experimental setup and improves the available data base for the SCX reaction. It is shown that the description of the SCX cross sections is improved if the s-wave amplitudes, that have been fixed essentially by elastic pion-nucleon scattering data, is reduced by (4{+-}1.5)%. The exact value depends on the SCX literature data included and on the parameters of the {delta}{sup 0} Breit-Wigner resonance describing the p{sub 33}-waves. This shows that p-wave as well as s-wave effects should be considered in studies of isospin

  9. Total cross sections for pion charge exchange on the proton

    International Nuclear Information System (INIS)

    Breitschopf, J.

    2006-01-01

    This work describes the measurement of total SCX cross sections employing a new 4π scintillation counter to perform transmission measurements in the incident pion energy range from about 38 to 250 MeV. A small 4π detector box consisting of thin plastic scintillators has been constructed. The transmission technique, which was used, relates the number of transmitted charged pions to that of incident beam pions and this way effectively counts events with neutral products. The incoming negative pions were counted by three beam defining counters before they hit a target of very well known size and chemical composition. The target was placed in the box detector which was not sensitive to the neutral particles resulting from the SCX. The total cross section for emerging neutral particles was derived from the comparison of the numbers of the incoming and transmitted charged particles. The total SCX cross section on hydrogen was derived from the transmissions of a CH 2 target, a carbon target and an empty target. For a detailed offline analysis all TDC, QDC and FADC information was recorded in an event by event mode for each triggered beam event. Various corrections had to be applied to the data, such as random correction, the detection of neutrals in the detector, Dalitz decay, pion decay and the radiative pion capture. This measurement covers, as the only experiment, the whole Δ-resonance and the sp-interference region in one single experimental setup and improves the available data base for the SCX reaction. It is shown that the description of the SCX cross sections is improved if the s-wave amplitudes, that have been fixed essentially by elastic pion-nucleon scattering data, is reduced by (4±1.5)%. The exact value depends on the SCX literature data included and on the parameters of the Δ 0 Breit-Wigner resonance describing the p 33 -waves. This shows that p-wave as well as s-wave effects should be considered in studies of isospin symmetry breaking. Interestingly

  10. A comparative study of fingerprint thinning algorithms

    CSIR Research Space (South Africa)

    Khanyile, NP

    2011-08-01

    Full Text Available Thinning plays a very important role in the preprocessing phase of automatic fingerprint recognition/identification systems. The performance of minutiae extraction relies heavily on the quality of skeletons used. A good fingerprint thinning...

  11. Laser applications in thin-film photovoltaics

    OpenAIRE

    Bartlome, R.; Strahm, B.; Sinquin, Y.; Feltrin, A.; Ballif, C.

    2009-01-01

    We review laser applications in thin-film photovoltaics (thin-film Si, CdTe, and Cu(In,Ga)Se2 solar cells). Lasers are applied in this growing field to manufacture modules, to monitor Si deposition processes, and to characterize opto-electrical properties of thin films. Unlike traditional panels based on crystalline silicon wafers, the individual cells of a thin-film photovoltaic module can be serially interconnected by laser scribing during fabrication. Laser scribing applications are descri...

  12. Nanocrystal thin film fabrication methods and apparatus

    Energy Technology Data Exchange (ETDEWEB)

    Kagan, Cherie R.; Kim, David K.; Choi, Ji-Hyuk; Lai, Yuming

    2018-01-09

    Nanocrystal thin film devices and methods for fabricating nanocrystal thin film devices are disclosed. The nanocrystal thin films are diffused with a dopant such as Indium, Potassium, Tin, etc. to reduce surface states. The thin film devices may be exposed to air during a portion of the fabrication. This enables fabrication of nanocrystal-based devices using a wider range of techniques such as photolithography and photolithographic patterning in an air environment.

  13. Subject categories and scope descriptions

    International Nuclear Information System (INIS)

    2002-01-01

    This document is one in a series of publications known as the ETDE/INIS Joint Reference Series. It defines the subject categories and provides the scope descriptions to be used for categorization of the nuclear literature for the preparation of INIS and ETDE input by national and regional centres. Together with the other volumes of the INIS Reference Series it defines the rules, standards and practices and provides the authorities to be used in the International Nuclear Information System and ETDE. A complete list of the volumes published in the INIS Reference Series may be found on the inside front cover of this publication. This INIS/ETDE Reference Series document is intended to serve two purposes: to define the subject scope of the International Nuclear Information System (INIS) and the Energy Technology Data Exchange (ETDE) and to define the subject classification scheme of INIS and ETDE. It is thus the guide to the inputting centres in determining which items of literature should be reported, and in determining where the full bibliographic entry and abstract of each item should be included in INIS or ETDE database. Each category is identified by a category code consisting of three alphanumeric characters. A scope description is given for each subject category. The scope of INIS is the sum of the scopes of all the categories. With most categories cross references are provided to other categories where appropriate. Cross references should be of assistance in finding the appropriate category; in fact, by indicating topics that are excluded from the category in question, the cross references help to clarify and define the scope of the category to which they are appended. A Subject Index is included as an aid to subject classifiers, but it is only an aid and not a means for subject classification. It facilitates the use of this document, but is no substitute for the description of the scope of the subject categories

  14. ELECTRICAL POWER SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    M. Maniyar

    2004-06-22

    The purpose of this revision of the System Description Document (SDD) is to establish requirements that drive the design of the electrical power system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience are design engineers. This type of SDD leads and follows the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. This SDD follows the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to this system are obtained from ''Project Functional and Operational Requirements'' (F&OR) (Siddoway, 2003). Other requirements to support the design process have been taken from higher level requirements documents such as ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), the fire hazards analyses, and the preclosure safety analysis. The above mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canori and Leitner 2003) requirements. This SDD includes several appendices with supporting information. Appendix B lists key system charts, diagrams, drawings, and lists; and Appendix C is a list of system procedures.

  15. ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    S. Roy

    2004-06-24

    The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F&OR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures.

  16. SNF AGING SYSTEM DESCRIPTION DOCUMENT

    International Nuclear Information System (INIS)

    L.L. Swanson

    2005-01-01

    The purpose of this system description document (SDD) is to establish requirements that drive the design of the spent nuclear fuel (SNF) aging system and associated bases, which will allow the design effort to proceed. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD follows the design with regard to the description of the system. The description provided in the SDD reflects the current results of the design process. Throughout this SDD, the term aging cask applies to vertical site-specific casks and to horizontal aging modules. The term overpack is a vertical site-specific cask that contains a dual-purpose canister (DPC) or a disposable canister. Functional and operational requirements applicable to this system were obtained from ''Project Functional and Operational Requirements'' (F andOR) (Curry 2004 [DIRS 170557]). Other requirements that support the design process were taken from documents such as ''Project Design Criteria Document'' (PDC) (BSC 2004 [DES 171599]), ''Site Fire Hazards Analyses'' (BSC 2005 [DIRS 172174]), and ''Nuclear Safety Design Bases for License Application'' (BSC 2005 [DIRS 171512]). The documents address requirements in the ''Project Requirements Document'' (PRD) (Canori and Leitner 2003 [DIRS 166275]). This SDD includes several appendices. Appendix A is a Glossary; Appendix B is a list of key system charts, diagrams, drawings, lists and additional supporting information; and Appendix C is a list of

  17. Fully Integrated Applications of Thin Films on Low Temperature Cofired Ceramic (LTCC)

    Energy Technology Data Exchange (ETDEWEB)

    Ambrose Wolf; Ken Peterson; Matt O' Keefe; Wayne Huebner; Bill Kuhn

    2012-04-19

    Thin film multilayers have previously been introduced on multilayer low temperature cofired ceramic (LTCC), as well as initial thin film capacitors on LTCC. The ruggedness of a multipurpose Ti-Cu-Pt-Au stack for connectivity and RF conductivity has continued to benefit fabrication and reliability in state of-the-art modules, while the capacitors have followed the traditional Metal-Insulator-Metal (MIM) style. The full integration of thin film passives with thin film connectivity traces is presented. Certain passives, such as capacitors, require specifically tailored and separately patterned thin film (multi-)layers, including a dielectric. Different capacitance values are achieved by variation of both the insulator layer thickness and the active area of the capacitor. Other passives, such as filters, require only the conductor - a single thin film multilayer. This can be patterned from the same connectivity thin film material (Ti-Cu-Pt-Au), or a specially tailored thin film material (e.g. Ti-Cu-Au) can be deposited. Both versions are described, including process and integration details. Examples are discussed, ranging from patterning for maximum tolerances, to space and performance-optimized designs. Cross-sectional issues associated with integration are also highlighted in the discussion.

  18. Matérn thinned Cox processes

    DEFF Research Database (Denmark)

    Andersen, Ina Trolle; Hahn, Ute

    2016-01-01

    and hard core behaviour can be achieved by applying a dependent Matérn thinning to a Cox process. An exact formula for the intensity of a Matérn thinned shot noise Cox process is derived from the Palm distribution. For the more general class of Matérn thinned Cox processes, formulae for the intensity...

  19. Matérn thinned Cox processes

    DEFF Research Database (Denmark)

    Andersen, Ina Trolle; Hahn, Ute

    of clustering and hard core behaviour can be achieved by applying a dependent Matérn thinning to a Cox process. An exact formula for the intensity of a Matérn thinned shot noise Cox process is derived from the Palm distribution. For the more general class of Matérn thinned Cox processes, formulae...

  20. Ultra-thin chip technology and applications

    CERN Document Server

    2010-01-01

    Ultra-thin chips are the "smart skin" of a conventional silicon chip. This book shows how very thin and flexible chips can be fabricated and used in many new applications in microelectronics, microsystems, biomedical and other fields. It provides a comprehensive reference to the fabrication technology, post processing, characterization and the applications of ultra-thin chips.