WorldWideScience

Sample records for thick paleozoic sediments

  1. U-Pb Detrital Zircon Geochronologic Constraints on Depositional Age and Sediment Source Terrains of the Late Paleozoic Tepuel-Genoa Basin

    Science.gov (United States)

    Griffis, N. P.; Montanez, I. P.; Isbell, J.; Gulbranson, E. L.; Wimpenny, J.; Yin, Q. Z.; Cúneo, N. R.; Pagani, M. A.; Taboada, A. C.

    2014-12-01

    The late Paleozoic Ice Age (LPIA) is the longest-lived icehouse of the Phanerozoic and the only time a metazoan dominated and vegetated world transitioned from an icehouse climate into a greenhouse. Despite several decades of research, the timing, extent of glaciation and the location of ice centers remain unresolved, which prohibits reconstruction of ice volume. The Permo-Carboniferous sediments in the Tepuel-Genoa Basin, Patagonia contains a near complete record of sedimentation from the lower Carboniferous through lower Permian. Outsized clasts, thin pebble-rich diamictites and slumps represent the last of the late Paleozoic glacially influenced deep-water marine sediments in the Mojón de Hierro Fm. and the Paleozoic of Patagonia. U-Pb analysis of detrital zircons separated from slope sediments reveal groupings (20 myr bins, n≥5 zircons) with peak depositional ages of 420, 540 to 660 and 1040 Ma. Zircon age populations recovered from the Mojón de Hierro Fm. compare well with bedrock ages of the Deseado Massif of SE Patagonia, suggesting this may be a potential source of sediments. The maximum depositional age of the sediments is 306.05 ± 3.7 Ma (2σ) as determined by the median age of the two youngest concordant zircons that overlap in error. The youngest zircon from the analysis yields a 238U/206Pb age of 301.3 ± 4.5 Ma (2σ; MSWD = 2.3). Younger zircons from the analysis compare well with the age of granite bedrock exposed along the basin margin to the E-NE suggesting they may reflect a more proximal source. These data, which indicate a maximum age of late Carboniferous for the Mojón de Hierro Fm, provide the first geochemical constraints for the timing of final deposition of glaciomarine sediments in the Tepuel-Genoa Basin, and contributes to the biostratigraphic correlation of the late Paleozoic succession in Patagonia with other key LPIA basins that has thus far been hindered by faunal provincialism.

  2. Ocean Sediment Thickness Contours

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Ocean sediment thickness contours in 200 meter intervals for water depths ranging from 0 - 18,000 meters. These contours were derived from a global sediment...

  3. Nearshore sediment thickness, Fire Island, New York

    Science.gov (United States)

    Locker, Stanley D.; Miselis, Jennifer L.; Buster, Noreen A.; Hapke, Cheryl J.; Wadman, Heidi M.; McNinch, Jesse E.; Forde, Arnell S.; Stalk, Chelsea A.

    2017-04-03

    Investigations of coastal change at Fire Island, New York (N.Y.), sought to characterize sediment budgets and determine geologic framework controls on coastal processes. Nearshore sediment thickness is critical for assessing coastal system sediment availability, but it is largely unquantified due to the difficulty of conducting geological or geophysical surveys across the nearshore. This study used an amphibious vessel to acquire chirp subbottom profiles. These profiles were used to characterize nearshore geology and provide an assessment of nearshore sediment volume. Two resulting sediment-thickness maps are provided: total Holocene sediment thickness and the thickness of the active shoreface. The Holocene sediment section represents deposition above the maximum flooding surface that is related to the most recent marine transgression. The active shoreface section is the uppermost Holocene sediment, which is interpreted to represent the portion of the shoreface thought to contribute to present and future coastal behavior. The sediment distribution patterns correspond to previously defined zones of erosion, accretion, and stability along the island, demonstrating the importance of sediment availability in the coastal response to storms and seasonal variability. The eastern zone has a thin nearshore sediment thickness, except for an ebb-tidal deposit at the wilderness breach caused by Hurricane Sandy. Thicker sediment is found along a central zone that includes shoreface-attached sand ridges, which is consistent with a stable or accretional coastline in this area. The thickest overall Holocene section is found in the western zone of the study, where a thicker lower section of Holocene sediment appears related to the westward migration of Fire Island Inlet over several hundred years.

  4. Braided fluvial sedimentation in the lower paleozoic cape basin, South Africa

    Science.gov (United States)

    Vos, Richard G.; Tankard, Anthony J.

    1981-07-01

    Lower Paleozoic braided stream deposits from the Piekenier Formation in the Cape Province, South Africa, provide information on lateral and vertical facies variability in an alluvial plain complex influenced by a moderate to high runoff. Four braided stream facies are recognized on the basis of distinct lithologies and assemblages of sedimentary structures. A lower facies, dominated by upward-fining conglomerate to sandstone and mudstone channel fill sequences, is interpreted as a middle to lower alluvial plain deposit with significant suspended load sedimentation in areas of moderate to low gradients. These deposits are succeeded by longitudinal conglomerate bars which are attributed to middle to upper alluvial plain sedimentation with steeper gradients. This facies is in turn overlain by braid bar complexes of large-scale transverse to linguoid dunes consisting of coarse-grained pebbly sandstones with conglomerate lenses. These bar complexes are compared with environments of the Recent Platte River. They represent a middle to lower alluvial plain facies with moderate gradients and no significant suspended load sedimentation or vegetation to stabilize channels. These bar complexes interfinger basinward with plane bedded medium to coarse-grained sandstones interpreted as sheet flood deposits over the distal portions of an alluvial plain with low gradients and lacking fine-grained detritus or vegetation.

  5. Paleozoic stratigraphy of two areas in southwestern Indiana

    International Nuclear Information System (INIS)

    Droste, J.B.

    1976-09-01

    Two areas recommended for evaluation as solid waste disposal sites lie along the strike of Paleozoic rocks in southwestern Indiana. Thin Pennsylvanian rocks and rocks of the upper Mississippian are at the bedrock surface in maturely dissected uplands in both areas. The gross subsurface stratigraphy beneath both areas is the same, but facies and thickness variation in some of the subsurface Paleozoic units provide for some minor differences between the areas. Thick middle Mississippi carbonates grade downward into clastics of lower Mississippian (Borden Group) and upper Devonian (New Albany Shale) rocks. Middle Devonian and Silurian rocks are dominated by carbonate lithologies. Upper Ordovician (Maquoketa Group) overly carbonates of middle Ordovician age. Thick siltstone and shale of the Borden Group-New Albany Shale zone and Maquoketa Group rocks should be suitable for repository development

  6. Early Permian intrusions in the Paleozoic sediments of the Eastern North Sea area

    DEFF Research Database (Denmark)

    Clausen, O.R.; Andresen, Katrine Juul; Rasmussen, Jens Andreas

    in the Northern Permian Basin which in the eastern North Sea is separated from the Southern Permian Basin by the Ringkøbing-Fyn High. The Permian basins were initiated during thermal subsidence following a late Carboniferous- early Permian rifting phase associated with extensive igneous activity recorded across...... the entire North Sea Basin. The easternmost intrusions and extrusions have been associated to the “Skagerrak-Centered Large Igneous Province” that has an early Permian age of c. 297 Ma. Compared to the Southern Permian Basin which historically has been intensely investigated because of the known presence...... of hydrocarbons within the Paleozoic sediments, the Northern Permian Basin has gained much less interest outside the hydrocarbon producing Mesozoic graben systems. This is mainly due to an apparent lack of potential source rocks. A major E-W striking northward dipping fault system characterizes the study area...

  7. Numerical simulation of sediment deposition thickness at Beidaihe International Yacht Club

    Directory of Open Access Journals (Sweden)

    Cheng-gang Lu

    2010-09-01

    Full Text Available The finite element method (FEM was used to simulate sediment hydrodynamics at the Beidaihe International Yacht Club, and a two-dimensional model was established. The sediment movement and deposition were analyzed under many tidal conditions in conjunction with the hydrological regime of the Daihe River. The peak value of the sediment deposition thickness appears in the main channel and around the estuary. The sediment deposition thickness is essentially constant and relatively small in the project area. The sediment deposition thickness in the main channel, in the yachting area, and around the hotel is greater than the other areas in the project. Regular excavation and dredging of the channel is the best measure for mitigating the sedimentation.

  8. Seismic stratigraphic analysis of the Cenozoic sediments in the NW Faroe Shetland Basin – Implications for inherited structural control of sediment distribution

    DEFF Research Database (Denmark)

    Ólavsdóttir, Jana; Andersen, Morten Sparre; Boldreel, Lars Ole

    2013-01-01

    The post-basalt strata in the Faroese area have been investigated based on interpretation of 2D and 3D reflection seismic data. The post-basalt package is divided into 5 units which have led to the constructions of 6 structural maps and 5 thickness maps. Within the 5 units 12 prograding sediment...... of the basin, and local uplift of sediment source areas. Reactivation of older, Paleozoic and Mesozoic, structural elements seem to control the sediment path way and restrict the depositional areas. Various structural elements being re-activated at different times caused considerable structural complexity....... Understanding the older, structural elements and their control on sedimentation is a potential tool for understanding deviations from “normal” thermal subsidence and for predicting the prospectivity in the post-basalt succession in the Faroe-Shetland Basin....

  9. Mapping sediment thickness of Islamabad city using empirical relationships: Implications for seismic hazard assessment

    Science.gov (United States)

    Khan, Sarfraz; Khan, M. Asif

    2016-04-01

    Soft sediments make an important component of the subsurface lithology, especially in areas underlain by river/stream basins. Occupying a position directly above the bedrock up to the land surface, these soft sediments can range in thickness from few centimeters to hundreds of meters. They carry a special nuisance in seismic hazards, as they serve as a source of seismic amplification that may enhance the seismic shaking of many folds. Determination of the thickness of the soft sediments is therefore crucial in seismic hazard analysis. A number of studies in recent years have demonstrated that frequency and amplitude spectrum obtained from the noise measurements during the recording of natural seismicity can be used to obtain thickness of soft sediments covering the bedrock. Nakamura (1989) presented a technique to determine such spectrum using ratio of horizontal to vertical components of the Rayleigh waves. The present study is based on an extensive set of microtremor measurements carried out in the Islamabad city, Pakistan. Fundamental frequencies were obtained from weak motion sensors and Tromino Engy Plus instruments to show that the correlation is clearly valid for a wide range of sediment thickness. A simple formula was derived for the investigated area to determine directly the thickness of sediments from the main peaks in the H/ V spectrum for seismometer and Tromino data separately. A comparison is made between sediment thicknesses derived from empirical relations developed in this study with those given in literature to demonstrate a positive correlation. The correlation of instrumental resonant frequencies with calculated resonant frequencies (theoretical) suggests that the relation derived from the noise measurements mostly depends on the velocity depth function of the shear wave. The fundamental frequency of the main peak of spectral ratio of H/ V using the both instruments correlates well with the thickness of sediments at the site obtained from the

  10. Predicting Sediment Thickness on Vanished Ocean Crust Since 200 Ma

    Science.gov (United States)

    Dutkiewicz, A.; Müller, R. D.; Wang, X.; O'Callaghan, S.; Cannon, J.; Wright, N. M.

    2017-12-01

    Tracing sedimentation through time on existing and vanished seafloor is imperative for constraining long-term eustasy and for calculating volumes of subducted deep-sea sediments that contribute to global geochemical cycles. We present regression algorithms that incorporate the age of the ocean crust and the mean distance to the nearest passive margin to predict sediment thicknesses and long-term decompacted sedimentation rates since 200 Ma. The mean sediment thickness decreases from ˜220 m at 200 Ma to a minimum of ˜140 m at 130 Ma, reflecting the replacement of old Panthalassic ocean floor with young sediment-poor mid-ocean ridges, followed by an increase to ˜365 m at present-day. This increase reflects the accumulation of sediments on ageing abyssal plains proximal to passive margins, coupled with a decrease in the mean distance of any parcel of ocean crust to the nearest passive margin by over 700 km, and a doubling of the total passive margin length at present-day. Mean long-term sedimentation rates increase from ˜0.5 cm/ky at 160 Ma to over 0.8 cm/ky today, caused by enhanced terrigenous sediment influx along lengthened passive margins, superimposed by the onset of ocean-wide carbonate sedimentation. Our predictive algorithms, coupled to a plate tectonic model, provide a framework for constraining the seafloor sediment-driven eustatic sea-level component, which has grown from ˜80 to 210 m since 120 Ma. This implies a long-term sea-level rise component of 130 m, partly counteracting the contemporaneous increase in ocean basin depth due to progressive crustal ageing.

  11. Tectonic isolation from regional sediment sourcing of the Paradox Basin

    Science.gov (United States)

    Smith, T. M.; Saylor, J.; Sundell, K. E.; Lapen, T. J.

    2017-12-01

    The Appalachian and Ouachita-Marathon mountain ranges were created by a series of tectonic collisions that occurred through the middle and late Paleozoic along North America's eastern and southern margins, respectively. Previous work employing detrital zircon U-Pb geochronology has demonstrated that fluvial and eolian systems transported Appalachian-derived sediment across the continent to North America's Paleozoic western margin. However, contemporaneous intraplate deformation of the Ancestral Rocky Mountains (ARM) compartmentalized much of the North American western interior and mid-continent. We employ lithofacies characterization, stratigraphic thickness, paleocurrent data, sandstone petrography, and detrital zircon U-Pb geochronology to evaluate source-sink relationships of the Paradox Basin, which is one of the most prominent ARM basins. Evaluation of provenance is conducted through quantitative comparison of detrital zircon U-Pb distributions from basin samples and potential sources via detrital zircon mixture modeling, and is augmented with sandstone petrography. Mixing model results provide a measure of individual source contributions to basin stratigraphy, and are combined with outcrop and subsurface data (e.g., stratigraphic thickness and facies distributions) to create tectonic isolation maps. These maps elucidate drainage networks and the degree to which local versus regional sources influence sediment character within a single basin, or multiple depocenters. Results show that despite the cross-continental ubiquity of Appalachian-derived sediment, fluvial and deltaic systems throughout much of the Paradox Basin do not record their influence. Instead, sediment sourcing from the Uncompahgre Uplift, which has been interpreted to drive tectonic subsidence and formation of the Paradox Basin, completely dominated its sedimentary record. Further, the strong degree of tectonic isolation experienced by the Paradox Basin appears to be an emerging, yet common

  12. Late Paleozoic paleofjord in the southernmost Parana Basin (Brazil): Geomorphology and sedimentary fill

    Science.gov (United States)

    Tedesco, Julia; Cagliari, Joice; Coitinho, Julia dos Reis; da Cunha Lopes, Ricardo; Lavina, Ernesto Luiz Correa

    2016-09-01

    In the southernmost part of the Parana Basin, records of the late Paleozoic glaciation occur in a discontinuous form preserved in paleovalley systems excavated in the crystalline basement. This paper addresses one of these paleovalleys, the Mariana Pimentel, which extends over 60 km with NW-SE valley direction and a constant width of 2.5 km. With the objective of demonstrating that the paleovalley worked as a fjord during the glaciation period, its origin as well as sedimentary fill and morphology were analyzed. The paleovalley morphology was obtained through electrical resistivity (electrical sounding and lateral mapping) and mathematical modeling in four transverse sections. The morphology of the paleovalley documented by the U-shape, steady width, and high depth reaching up to 400 m are typical features of modern glacial valleys. The sedimentary facies that fill the base of the paleovalley, such as rhythmites and dropstones with thickness up to 70 m and diamictites with faceted pebbles (up to 5 m thick) are signs of its glacial origin. During the glaciation period, the paleovalley had a connection to the epicontinental sea located to the northwest, extended toward Namibia, and was excavated by glaciers from the highlands of this region. Thus, the evidence attests that the Mariana Pimentel paleovalley was a fjord during the late Paleozoic glaciation. The duration of the late Paleozoic glaciation (which is longer than the Quaternary glaciation), the apatite fission track that suggests erosion up to 4 km thick in the study area, and the lack of preserved hanging valleys in the Mariana Pimentel indicate that the paleovalley once featured a higher dimension. Furthermore, the existence of paleofjords excavated in the border of the basement corroborates the idea of small ice centers controlled by topography during the late Paleozoic glaciation.

  13. Upper Paleozoic Marine Shale Characteristics and Exploration Prospects in the Northwestern Guizhong Depression, South China

    Science.gov (United States)

    Zhu, Zhenhong; Yao, Genshun; Lou, Zhanghua; Jin, Aimin; Zhu, Rong; Jin, Chong; Chen, Chao

    2018-05-01

    Multiple sets of organic-rich shales developed in the Upper Paleozoic of the northwestern Guizhong Depression in South China. However, the exploration of these shales is presently at a relatively immature stage. The Upper Paleozoic shales in the northwestern Guizhong Depression, including the Middle Devonian Luofu shale, the Nabiao shale, and the Lower Carboniferous Yanguan shale, were investigated in this study. Mineral composition analysis, organic matter analysis (including total organic carbon (TOC) content, maceral of kerogen and the vitrinite reflection (Ro)), pore characteristic analysis (including porosity and permeability, pore type identification by SEM, and pore size distribution by nitrogen sorption), methane isothermal sorption test were conducted, and the distribution and thickness of the shales were determined, Then the characteristics of the two target shales were illustrated and compared. The results show that the Upper Paleozoic shales have favorable organic matter conditions (mainly moderate to high TOC content, type I and II1 kerogen and high to over maturity), good fracability potential (brittleness index (BI) > 40%), multiple pore types, stable distribution and effective thickness, and good methane sorption capacity. Therefore, the Upper Paleozoic shales in the northern Guizhong Depression have good shale gas potential and exploration prospects. Moreover, the average TOC content, average BI, thickness of the organic-rich shale (TOC > 2.0 wt%) and the shale gas resources of the Middle Devonian shales are better than those of the Lower Carboniferous shale. The Middle Devonian shales have better shale gas potential and exploration prospects than the Lower Carboniferous shales.

  14. Total Sediment Thickness of the World's Oceans & Marginal Seas

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A digital total-sediment-thickness database for the world's oceans and marginal seas has been compiled by the NOAA National Geophysical Data Center (NGDC). The data...

  15. Mapping sediment thickness of Islamabad city using empirical ...

    Indian Academy of Sciences (India)

    A number of studies in recent years have demonstrated that frequency and ... sediment thicknesses derived from empirical relations developed in this study with ... Location map of the study area, the bold light grey line shows the boundary of the Islamabad region. .... frequency disturbances (wind blowing, in case of near tall ...

  16. Thickness of surficial sediment at and near the Idaho National Engineering Laboratory, Idaho

    International Nuclear Information System (INIS)

    Anderson, S.R.; Liszewski, M.J.; Ackerman, D.J.

    1996-06-01

    Thickness of surficial sediment was determined from natural-gamma logs in 333 wells at and near the Idaho National Engineering Laboratory in eastern Idaho to provide reconnaissance data for future site-characterization studies. Surficial sediment, which is defined as the unconsolidated clay, silt, sand, and gravel that overlie the uppermost basalt flow at each well, ranges in thickness from 0 feet in seven wells drilled through basalt outcrops east of the Idaho Chemical Processing Plant to 313 feet in well Site 14 southeast of the Big Lost River sinks. Surficial sediment includes alluvial, lacustrine, eolian, and colluvial deposits that generally accumulated during the past 200 thousand years. Additional thickness data, not included in this report, are available from numerous auger holes and foundation borings at and near most facilities

  17. Fission track analysis and evolution of mesozoic-paleozoic hydrocarbon resource-rocks headed in Northern Jiangsu-South Yellow sea basin

    International Nuclear Information System (INIS)

    Xu Hong; Cai Qianzhong; Sun Heqing; Guo Zhenxuan; Yan Guijing; Dai Jing; Liu Dongying

    2008-01-01

    Fission track data of different geologic epoches from Binhai salient, Yancheng sag, Haian sag, Baiju sag, Gaoyou sag, Hongze sag and Jinhu sag of northern Jiangsu basin and seismic data from Laoshan uplift in South Yellow Sea basin and evolution of Paleozoic hydrocarbon resource-rocks headed in the Northern Jiangsu-South Yellow Sea basin were studied. Results indicate that Binhai salient uplifted in 38-15 Ma, forming 'structure uplifting model', Paleozoic hydrocarbon resource-rocks have the appearance of 'different layers but identical mature, different layers but identical temperature' with Laoshan uplift. All sags have the characters of 'long time heating model', and sedimentations in Cenozoic were exploited by 2 km. Mesozoic-Paleozoic hydrocarbon resource- rocks of Laoshan uplift get ahead of 10 km. Structure evolution was compared with Binhai salient. According to the modeling results of secondary hydrocarbon generation, Mesozoic-Paleozoic hydrocarbon resource-rocks of Laoshan uplift have the good reservoir potentiality and probably become an important new window for sea oil and gas exploration. (authors)

  18. Total Sediment Thickness of the World's Oceans & Marginal Seas, Version 2

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NGDC's global ocean sediment thickness grid (Divins, 2003) has been updated for the Australian-Antarctic region (60?? -155?? E, 30?? -70?? S). New seismic reflection...

  19. Soft-sediment deformation structures from an ice-marginal storm-tide interactive system, Permo-Carboniferous Talchir Formation, Talchir Coalbasin, India

    Science.gov (United States)

    Bhattacharya, H. N.; Bhattacharya, Biplab

    2010-01-01

    Permo-Carboniferous Talchir Formation, Talchir Coalbasin, India, records sedimentation during a phase of climatic amelioration in an ice-marginal storm-affected shelf. Evidences of subtidal processes are preserved only under thick mud drapes deposited during waning storm phases. Various soft-sediment deformation structures in some sandstone/siltstone-mudstone interbeds, like syn-sedimentary faults, deformed laminations, sand-silt flows, convolute laminations and various flame structures, suggest liquefaction and fluidization of the beds due to passage of syn-depositional seismic shocks. In the Late Paleozoic ice-marginal shelf, such earthquake tremors could be generated by crustal movements in response to glacioisostatic adjustments of the basin floor.

  20. Central Paleozoic prehistory of Vilyuyskiy syneclise

    Energy Technology Data Exchange (ETDEWEB)

    Ul' mesvay, F S

    1981-01-01

    Based on a study of lithological features of the central Paleozoic deposits of the Ygyattinskiy and Kempendyayskiy Basins, a comparison plan is developed. The main features of the middle Paleozoic history of the region are clarified. Their affiliation to a single structure of the avlakogen type is established. Based on the proximity of rock associations and time for development, a similarity of the studied region and the Pripyatskiy-Donets avlakogen has been established. A conclusion is drawn about the possible productivity of the middle Paleozoic deposits.

  1. Late Paleozoic to Jurassic chronostratigraphy of coastal southern Peru: Temporal evolution of sedimentation along an active margin

    Science.gov (United States)

    Boekhout, F.; Sempere, T.; Spikings, R.; Schaltegger, U.

    2013-11-01

    We present an integrated geochronological and sedimentological study that significantly revises the basin and magmatic history associated with lithospheric thinning in southern coastal Peru (15-18°S) since the onset of subduction at ˜530 Ma. Until now, estimating the age of the sedimentary and volcanic rocks has heavily relied on paleontologic determinations. Our new geochronological data, combined with numerous field observations, provide the first robust constraints on their chronostratigraphy, which is discussed in the light of biostratigraphical attributions. A detailed review of the existing local units simplifies the current stratigraphic nomenclature and clarifies its absolute chronology using zircon U-Pb ages. We observe that the Late Paleozoic to Jurassic stratigraphy of coastal southern Peru consists of two first-order units, namely (1) the Yamayo Group, a sedimentary succession of variable (0-2 km) thickness, with apparently no nearby volcanic lateral equivalent, and (2) the overlying Yura Group, consisting of a lower, 1-6 km-thick volcanic and volcaniclastic unit, the Chocolate Formation, and an upper, 1-2 km-thick sedimentary succession that are in markedly diachronous contact across the coeval arc and back-arc. We date the local base of the Chocolate Formation, and thus of the Yura Group, to 216 Ma, and show that the underlying Yamayo Group spans a >110 Myr-long time interval, from at least the Late Visean to the Late Triassic, and is apparently devoid of significant internal discontinuities. The age of the top of the Chocolate Formation, i.e. of the volcanic arc pile, varies from ˜194 Ma to less than ˜135 Ma across the study area. We suggest that this simplified and updated stratigraphic framework can be reliably used as a reference for future studies.

  2. Detrital illite crystals identified from crystallite thickness measurements in siliciclastic sediments

    Science.gov (United States)

    Aldega, L.; Eberl, D.D.

    2005-01-01

    Illite crystals in siliciclastic sediments are heterogeneous assemblages of detrital material coming from various source rocks and, at paleotemperatures >70 ??C, of superimposed diagenetic modification in the parent sediment. We distinguished the relative proportions of 2M1 detrital illite and possible diagenetic 1Md + 1M illite by a combined analysis of crystal-size distribution and illite polytype quantification. We found that the proportions of 1Md + 1M and 2M1 illite could be determined from crystallite thickness measurements (BWA method, using the MudMaster program) by unmixing measured crystallite thickness distributions using theoretical and calculated log-normal and/or asymptotic distributions. The end-member components that we used to unmix the measured distributions were three asymptotic-shaped distributions (assumed to be the diagenetic component of the mixture, the 1Md + 1M polytypes) calculated using the Galoper program (Phase A was simulated using 500 crystals per cycle of nucleation and growth, Phase B = 333/cycle, and Phase C = 250/ cycle), and one theoretical log-normal distribution (Phase D, assumed to approximate the detrital 2M1 component of the mixture). In addition, quantitative polytype analysis was carried out using the RockJock software for comparison. The two techniques gave comparable results (r2 = 0.93), which indicates that the unmixing method permits one to calculate the proportion of illite polytypes and, therefore, the proportion of 2M1 detrital illite, from crystallite thickness measurements. The overall illite crystallite thicknesses in the samples were found to be a function of the relative proportions of thick 2M1 and thin 1Md + 1M illite. The percentage of illite layers in I-S mixed layers correlates with the mean crystallite thickness of the 1Md + 1M polytypes, indicating that these polytypes, rather than the 2M1 polytype, participate in I-S mixed layering.

  3. Estimation of soft sediment thickness in Kuala Lumpur based on microtremor observation data

    Science.gov (United States)

    Chiew, Chang Chyau; Cheah, Yi Ben; Tan, Chin Guan; Lau, Tze Liang

    2017-10-01

    Seismic site effect is one of the major concerns in earthquake engineering. Soft ground tends to amplify the seismic wave in surficial geological layers. The determination of soft ground thickness on the surface layers of the earth is an important input for seismic hazard assessment. This paper presents an easy and convenient approach to estimate the soft sediment thickness at the site using microtremor observation technique. A total number of 133 survey points were conducted in selected sites around Kuala Lumpur area using a microtremor measuring instrument, but only 103 survey points contributed to the seismic microzonation and sediment thickness plots. The bedrock of Kuala Lumpur area is formed by Kenny Hill Formation, limestone, granite, and the Hawthornden Schist; however, the thickness of surface soft ground formed by alluvial deposits, mine tailings, and residual soils remains unknown. Hence, the predominant frequency of the ground in each site was determined based on Nakamura method. A total number of 14 sites with known depth to bedrock from the supply of geotechnical reports in the study area were determined. An empirical correlation was developed to relate the ground predominant frequency and soft ground thickness. This correlation may contribute to local soil underlying the subsurface of Kuala Lumpur area. The finding provides an important relationship for engineers to estimate the soft ground thickness in Kuala Lumpur area based on the dynamic characteristics of the ground measured from microtremor observation.

  4. The thickness of cover sequences in the Western Desert of Iraq from a power spectrum analysis of gravity and magnetic data

    Science.gov (United States)

    Mousa, Ahmed; Mickus, Kevin; Al-Rahim, Ali

    2017-05-01

    The Western Desert of Iraq is part of the stable shelf region on the Arabian Plate where the subsurface structural makeup is relatively unknown due to the lack of cropping out rocks, deep drill holes and deep seismic refraction and reflection profiles. To remedy this situation, magnetic and gravity data were analyzed to determine the thickness of the Phanerozoic cover sequences. The 2-D power spectrum method was used to estimate the depth to density and magnetic susceptibility interfaces by using 0.5° square windows. Additionally, the gravity data were analyzed using isostatic residual and decompensative methods to isolate gravity anomalies due to upper crustal density sources. The decompensative gravity anomaly and the differentially reduced to the pole magnetic map indicate a series of mainly north-south and northwest-southeast trending maxima and minima anomalies related to Proterozoic basement lithologies and the varying thickness of cover sequences. The magnetic and gravity derived thickness of cover sequences maps indicate that these thicknesses range from 4.5 to 11.5 km. Both maps in general are in agreement but more detail in the cover thicknesses was determined by the gravity analysis. The gravity-based cover thickness maps indicates regions with shallower depths than the magnetic-based cover thickness t map which may be due to density differences between limestone and shale units within the Paleozoic sediments. The final thickness maps indicate that the Western Desert is a complicated region of basins and uplifts that are more complex than have been shown on previous structural maps of the Western Desert. These basins and uplifts may be related to Paleozoic compressional tectonic events and possibly to the opening of the Tethys Ocean. In addition, petroleum exploration could be extended to three basins outlined by our analysis within the relatively unexplored western portions of the Western Desert.

  5. Anomalous South Pacific lithosphere dynamics derived from new total sediment thickness estimates off the West Antarctic margin

    Science.gov (United States)

    Wobbe, Florian; Lindeque, Ansa; Gohl, Karsten

    2014-12-01

    Paleotopographic models of the West Antarctic margin, which are essential for robust simulations of paleoclimate scenarios, lack information on sediment thickness and geodynamic conditions, resulting in large uncertainties. A new total sediment thickness grid spanning the Ross Sea-Amundsen Sea-Bellingshausen Sea basins is presented and is based on all the available seismic reflection, borehole, and gravity modeling data offshore West Antarctica. This grid was combined with NGDC's global 5 arc minute grid of ocean sediment thickness (Whittaker et al., 2013) and extends the NGDC grid further to the south. Sediment thickness along the West Antarctic margin tends to be 3-4 km larger than previously assumed. The sediment volume in the Bellingshausen, Amundsen, and Ross Sea basins amounts to 3.61, 3.58, and 2.78 million km3, respectively. The residual basement topography of the South Pacific has been revised and the new data show an asymmetric trend over the Pacific-Antarctic Ridge. Values are anomalously high south of the spreading ridge and in the Ross Sea area, where the topography seems to be affected by persistent mantle processes. In contrast, the basement topography offshore Marie Byrd Land cannot be attributed to dynamic topography, but rather to crustal thickening due to intraplate volcanism. Present-day dynamic topography models disagree with the presented revised basement topography of the South Pacific, rendering paleotopographic reconstructions with such a limited dataset still fairly uncertain.

  6. Geology of Paleozoic Rocks in the Upper Colorado River Basin in Arizona, Colorado, New Mexico, Utah, and Wyoming, Excluding the San Juan Basin

    Science.gov (United States)

    Geldon, Arthur L.

    2003-01-01

    The geology of the Paleozoic rocks in the Upper Colorado River Basin in Arizona, Colorado, New Mexico, Utah, and Wyoming, was studied as part of the U.S. Geological Survey's Regional Aquifer-System Analysis Program to provide support for hydrogeological interpretations. The study area is segmented by numerous uplifts and basins caused by folding and faulting that have recurred repeatedly from Precambrian to Cenozoic time. Paleozoic rocks in the study area are 0-18,000 feet thick. They are underlain by Precambrian igneous, metamorphic, and sedimentary rocks and are overlain in most of the area by Triassic formations composed mostly of shale. The overlying Mesozoic and Tertiary rocks are 0-27,000 feet thick. All Paleozoic systems except the Silurian are represented in the region. The Paleozoic rocks are divisible into 11 hydrogeologic units. The basal hydrogeologic unit consisting of Paleozoic rocks, the Flathead aquifer, predominantly is composed of Lower to Upper Cambrian sandstone and quartzite. The aquifer is 0-800 feet thick and is overlain gradationally to unconformably by formations of Cambrian to Mississippian age. The Gros Ventre confining unit consists of Middle to Upper Cambrian shale with subordinate carbonate rocks and sandstone. The confining unit is 0-1,100 feet thick and is overlain gradationally to unconformably by formations of Cambrian to Mississippian age. The Bighom aquifer consists of Middle Cambrian to Upper Ordovician limestone and dolomite with subordinate shale and sandstone. The aquifer is 0-3,000 feet thick and is overlain unconformably by Devonian and Mississipplan rocks. The Elbert-Parting confining unit consists of Lower Devonian to Lower Mississippian limestone, dolomite, sandstone, quartzite, shale, and anhydrite. It is 0-700 feet thick and is overlain conformably to unconformably by Upper Devonian and Mississippian rocks. The Madison aquifer consists of two zones of distinctly different lithology. The lower (Redwall-Leadville) zone

  7. Reworked crustal of early Paleozoic WuYi Orogen revealed by receiver function data

    Science.gov (United States)

    Wei, Y.; Duan, Y.; Tian, X.; Zhao, Y.

    2017-12-01

    Intraplate orogenic belt, which occurs at the rigid and undeformable plate interiors, is a distinct new type of orogen rather than an interplate or plate marginal orogenic belt, whose deformation occurs exclusively at plate margins. Therefore, intraplate orogenic belts are the most obvious exception to the plate-tectonic paradigm, they are uncommon in Earth's history. The early Paleozoic Wuyi orogen in South China is one of the few examples of intraplate orogen, and is a key to understanding the process of intraplate orogenesis and global early Paleozoic geodynamics. In this study, we select teleseismic records from 45 mobile linear seismic stations deployed in Wuyi Mountain and 58 permanent stations setting in Jiangxi and Fujian provinces, from January 2011 to December 2012, and calculate the crustal thickness and average crustal Vp/Vs ratio using the H-κ stacking method. The main results include the following: 1) the crustal average Poission's ratio shows an increase tendency from land to sea, the interior of Wuyi orogen belt with an low ration less than 0.23, and the coastline with high ration which is up to 0.28, which indicate a very heterogeneous crustal structure and composition in Wuyi orogen and coast belt. 2) the crustal thickness ranges 28-34 km and shows a tendency of thinning from inland to coast in the region of SE China margin, which maight mean the eastern Eurasia lithospheric is extension and thinning induced by the subducted paleo-Pacific slab. To conclusion, we assume that Wuyi orogen experienced upper crustal thickening, lower crust and lithosphere delamination during the early Paleozoic orogeny, and lithosphere extension in Mesozoic. This research is founded by the Natural Science Foundation of China (41174052 and 41604048).

  8. Changes of freshwater-lens thickness in basaltic island aquifers overlain by thick coastal sediments

    Science.gov (United States)

    Rotzoll, Kolja; Oki, Delwyn S.; El-Kadi, Aly I.

    2010-01-01

    Freshwater-lens thickness and long-term changes in freshwater volume in coastal aquifers are commonly assessed through repeated measurement of salinity profiles from monitor wells that penetrate into underlying salt water. In Hawaii, the thickest measured freshwater lens is currently 262 m in dike-free, volcanic-rock aquifers that are overlain by thick coastal sediments. The midpoint depth (depth where salinity is 50% salt water) between freshwater and salt water can serve as an indicator for freshwater thickness. Most measured midpoints have risen over the past 40 years, indicating a shrinking lens. The mean rate of rise of the midpoint from 1999–2009 varied locally, with faster rates in highly developed areas (1.0 m/year) and slower rates in less developed areas (0.5 m/year). The thinning of the freshwater lenses is the result of long-term groundwater withdrawal and reduced recharge. Freshwater/salt-water interface locations predicted from measured water levels and the Ghyben-Herzberg principle may be deeper than measured midpoints during some periods and shallower during other periods, although depths may differ up to 100 m in some cases. Moreover, changes in the midpoint are slower than changes in water level. Thus, water levels may not be a reliable indicator of the amount of freshwater in a coastal aquifer.

  9. Hydrocarbon preservation conditions in Mesozoic–Paleozoic marine strata in the South Yellow Sea Basin

    Directory of Open Access Journals (Sweden)

    Jie Liang

    2017-11-01

    Full Text Available In the South Yellow Sea Basin, Mesozoic–Paleozoic marine strata are generally well developed with large thickness, and they are characterized by multi-source and multi-stage hydrocarbon accumulation, providing a material basis for the formation of large-scale oil and gas fields. However, no substantial breakthrough has been made in this area. Based on previous research results, the complex tectonic pattern of this superimposed basin was formed by multi-stage tectonic movements and the favorable static conditions for hydrocarbon preservation were reworked or destroyed by later superimposition. Therefore, hydrocarbon preservation conditions are the key factors for restricting the breakthrough of marine oil and gas exploration in this area. In this paper, hydrocarbon preservation conditions of marine strata in the South Yellow Sea Basin were comprehensively analyzed from many aspects, such as tectonic movement, source conditions, caprock characteristics, magmatic activities, and hydrogeological and hydrogeochemical characteristics. It is indicated that the complex tectonic pattern of the South Yellow Sea Basin is resulted from tectonic events in multiple stages, and the development and evolution of regional source rocks are mainly controlled by two stages (i.e., the stable evolution stage of Mesozoic–Paleozoic marine basin and the Mesozoic–Cenozoic tectonic pattern transformation and basin formation stage, so the characteristics of differential oil and gas preservation are presented. Besides, better marine hydrocarbon preservation preconditions in this area are weaker tectonic reworking, development of high-quality thick source rocks, good vertical sealing capacity of caprocks, weaker magmatic activity and confined hydrogeological conditions. It is concluded that the Laoshan Uplift in the central part of the South Yellow Sea Basin is structurally stable with weaker faulting and magmatic activities, so it is better in oil and gas preservation

  10. The effects of thick sediment upon continental breakup: seismic imaging and thermal modeling of the Salton Trough, southern California

    Science.gov (United States)

    Han, L.; Hole, J. A.; Lowell, R. P.; Stock, J. M.; Fuis, G. S.; Driscoll, N. W.; Kell, A. M.; Kent, G. M.; Harding, A. J.; Gonzalez-Fernandez, A.; Lázaro-Mancilla, O.

    2015-12-01

    Continental rifting ultimately creates a deep accommodation space for sediment. When a major river flows into a late-stage rift, thick deltaic sediment can change the thermal regime and alter the mechanisms of extension and continental breakup. The Salton Trough, the northernmost rift segment of the Gulf of California plate boundary, has experienced the same extension as the rest of the Gulf, but is filled to sea level by sediment from the Colorado River. Unlike the southern Gulf, seafloor spreading has not initiated. Instead, seismicity, high heat flow, and minor volcanoes attest to ongoing rifting of thin, transitional crust. Recently acquired controlled-source seismic refraction and wide-angle reflection data in the Salton Trough provide constraints upon crustal architecture and active rift processes. The crust in the central Salton Trough is only 17-18 km thick, with a strongly layered but relatively one-dimensional structure for ~100 km in the direction of plate motion. The upper crust includes 2-4 km of Colorado River sediment. Crystalline rock below the sediment is interpreted to be similar sediment metamorphosed by the high heat flow and geothermal activity. Meta-sediment extends to at least 9 km depth. A 4-5 km thick layer in the middle crust is either additional meta-sediment or stretched pre-existing continental crust. The lowermost 4-5 km of the crust is rift-related mafic magmatic intrusion or underplating from partial melting in the hot upper mantle. North American lithosphere in the Salton Trough has been almost or completely rifted apart. The gap has been filled by ~100 km of new transitional crust created by magmatism from below and sedimentation from above. These processes create strong lithologic, thermal, and rheologic layering. While heat flow in the rift is very high, rapid sedimentation cools the upper crust as compared to a linear geotherm. Brittle extension occurs within new meta-sedimentary rock. The lower crust, in comparison, is

  11. Tectono-thermal Evolution of the Lower Paleozoic Petroleum Source Rocks in the Southern Lublin Trough: Implications for Shale Gas Exploration from Maturity Modelling

    Science.gov (United States)

    Botor, Dariusz

    2018-03-01

    The Lower Paleozoic basins of eastern Poland have recently been the focus of intensive exploration for shale gas. In the Lublin Basin potential unconventional play is related to Lower Silurian source rocks. In order to assess petroleum charge history of these shale gas reservoirs, 1-D maturity modeling has been performed. In the Łopiennik IG-1 well, which is the only well that penetrated Lower Paleozoic strata in the study area, the uniform vitrinite reflectance values within the Paleozoic section are interpreted as being mainly the result of higher heat flow in the Late Carboniferous to Early Permian times and 3500 m thick overburden eroded due to the Variscan inversion. Moreover, our model has been supported by zircon helium and apatite fission track dating. The Lower Paleozoic strata in the study area reached maximum temperature in the Late Carboniferous time. Accomplished tectono-thermal model allowed establishing that petroleum generation in the Lower Silurian source rocks developed mainly in the Devonian - Carboniferous period. Whereas, during Mesozoic burial, hydrocarbon generation processes did not develop again. This has negative influence on potential durability of shale gas reservoirs.

  12. Devonian paleomagnetism of the North Tien Shan: Implications for the middle-Late Paleozoic paleogeography of Eurasia

    Science.gov (United States)

    Levashova, Natalia M.; Mikolaichuk, Alexander V.; McCausland, Philip J. A.; Bazhenov, Mikhail L.; Van der Voo, Rob

    2007-05-01

    The Ural-Mongol belt (UMB), between Siberia, Baltica and Tarim, is widely recognized as the locus of Asia's main growth during the Paleozoic, but its evolution remains highly controversial, as illustrated by the disparate paleogeographic models published in the last decade. One of the largest tectonic units of the UMB is the Kokchetav-North Tien Shan Domain (KNTD) that stretches from Tarim in the south nearly to the West Siberian Basin. The KNTD comprises several Precambrian microcontinents and numerous remnants of Early Paleozoic island arcs, marginal basins and accretionary complexes. In Late Ordovician time, all these structures had amalgamated into a single contiguous domain. Its paleogeographic position is of crucial importance for elucidating the Paleozoic evolution of the UMB in general and of the Urals in particular. The Aral Formation, located in Kyrgyzstan in the southern part of the KNTD, consists of a thick Upper Devonian (Frasnian) basalt-andesite sequence. Paleomagnetic data show a dual-polarity characteristic component (Dec/Inc = 286° / + 56°, α95 = 9°, k = 21, N = 15 sites). The primary origin of this magnetization is confirmed by a positive test on intraformational conglomerates. We combine this result with other Paleozoic data from the KNTD and show its latitudinal motion from the Late Ordovician to the end of the Paleozoic. The observed paleolatitudes are found to agree well with the values extrapolated from Baltica to a common reference point (42.5°N, 73°E) in our sampling area for the entire interval; hence coherent motion of the KNTD and Baltica is strongly indicated for most of the Paleozoic. This finding contradicts most published models of the UMB evolution, where the KNTD is separated from Baltica by a rather wide Ural Ocean containing one or more major plate boundaries. An exception is the model of Şengör and Natal'in [A.M.C. Şengör, B.A. Natal'in, Paleotectonics of Asia: fragments of a synthesis, in: A. Yin and M. Harrison (eds

  13. Revisions to the original extent of the Devonian Shale-Middle and Upper Paleozoic Total Petroleum System

    Science.gov (United States)

    Enomoto, Catherine B.; Rouse, William A.; Trippi, Michael H.; Higley, Debra K.

    2016-04-11

    Technically recoverable undiscovered hydrocarbon resources in continuous accumulations are present in Upper Devonian and Lower Mississippian strata in the Appalachian Basin Petroleum Province. The province includes parts of New York, Pennsylvania, Ohio, Maryland, West Virginia, Virginia, Kentucky, Tennessee, Georgia, and Alabama. The Upper Devonian and Lower Mississippian strata are part of the previously defined Devonian Shale-Middle and Upper Paleozoic Total Petroleum System (TPS) that extends from New York to Tennessee. This publication presents a revision to the extent of the Devonian Shale-Middle and Upper Paleozoic TPS. The most significant modification to the maximum extent of the Devonian Shale-Middle and Upper Paleozoic TPS is to the south and southwest, adding areas in Tennessee, Georgia, Alabama, and Mississippi where Devonian strata, including potential petroleum source rocks, are present in the subsurface up to the outcrop. The Middle to Upper Devonian Chattanooga Shale extends from southeastern Kentucky to Alabama and eastern Mississippi. Production from Devonian shale has been established in the Appalachian fold and thrust belt of northeastern Alabama. Exploratory drilling has encountered Middle to Upper Devonian strata containing organic-rich shale in west-central Alabama. The areas added to the TPS are located in the Valley and Ridge, Interior Low Plateaus, and Appalachian Plateaus physiographic provinces, including the portion of the Appalachian fold and thrust belt buried beneath Cretaceous and younger sediments that were deposited on the U.S. Gulf Coastal Plain.

  14. Testing the limits of Paleozoic chronostratigraphic correlation via high-resolution (13Ccarb) biochemostratigraphy across the Llandovery–Wenlock (Silurian) boundary: Is a unified Phanerozoic time scale achievable?

    Science.gov (United States)

    Cramer, Bradley D.; Loydell, David K.; Samtleben, Christian; Munnecke, Axel; Kaljo, Dimitri; Mannik, Peep; Martma, Tonu; Jeppsson, Lennart; Kleffner, Mark A.; Barrick, James E.; Johnson, Craig A.; Emsbo, Poul; Joachimski, Michael M.; Bickert, Torsten; Saltzman, Matthew R.

    2010-01-01

    The resolution and fidelity of global chronostratigraphic correlation are direct functions of the time period under consideration. By virtue of deep-ocean cores and astrochronology, the Cenozoic and Mesozoic time scales carry error bars of a few thousand years (k.y.) to a few hundred k.y. In contrast, most of the Paleozoic time scale carries error bars of plus or minus a few million years (m.y.), and chronostratigraphic control better than ??1 m.y. is considered "high resolution." The general lack of Paleozoic abyssal sediments and paucity of orbitally tuned Paleozoic data series combined with the relative incompleteness of the Paleozoic stratigraphic record have proven historically to be such an obstacle to intercontinental chronostratigraphic correlation that resolving the Paleozoic time scale to the level achieved during the Mesozoic and Cenozoic was viewed as impractical, impossible, or both. Here, we utilize integrated graptolite, conodont, and carbonate carbon isotope (??13Ccarb) data from three paleocontinents (Baltica, Avalonia, and Laurentia) to demonstrate chronostratigraphic control for upper Llando very through middle Wenlock (Telychian-Sheinwoodian, ~436-426 Ma) strata with a resolution of a few hundred k.y. The interval surrounding the base of the Wenlock Series can now be correlated globally with precision approaching 100 k.y., but some intervals (e.g., uppermost Telychian and upper Shein-woodian) are either yet to be studied in sufficient detail or do not show sufficient biologic speciation and/or extinction or carbon isotopic features to delineate such small time slices. Although producing such resolution during the Paleozoic presents an array of challenges unique to the era, we have begun to demonstrate that erecting a Paleozoic time scale comparable to that of younger eras is achievable. ?? 2010 Geological Society of America.

  15. Paleozoic oil/gas shale reservoirs in southern Tunisia: An overview

    Science.gov (United States)

    Soua, Mohamed

    2014-12-01

    During these last years, considerable attention has been given to unconventional oil and gas shale in northern Africa where the most productive Paleozoic basins are located (e.g. Berkine, Illizi, Kufra, Murzuk, Tindouf, Ahnet, Oued Mya, Mouydir, etc.). In most petroleum systems, which characterize these basins, the Silurian played the main role in hydrocarbon generation with two main 'hot' shale levels distributed in different locations (basins) and their deposition was restricted to the Rhuddanian (Lllandovery: early Silurian) and the Ludlow-Pridoli (late Silurian). A third major hot shale level had been identified in the Frasnian (Upper Devonian). Southern Tunisia is characterized by three main Paleozoic sedimentary basins, which are from North to South, the southern Chotts, Jeffara and Berkine Basin. They are separated by a major roughly E-W trending lower Paleozoic structural high, which encompass the Mehrez-Oued Hamous uplift to the West (Algeria) and the Nefusa uplift to the East (Libya), passing by the Touggourt-Talemzane-PGA-Bou Namcha (TTPB) structure close to southern Tunisia. The forementioned major source rocks in southern Tunisia are defined by hot shales with elevated Gamma ray values often exceeding 1400 API (in Hayatt-1 well), deposited in deep water environments during short lived (c. 2 Ma) periods of anoxia. In the course of this review, thickness, distribution and maturity maps have been established for each hot shale level using data for more than 70 wells located in both Tunisia and Algeria. Mineralogical modeling was achieved using Spectral Gamma Ray data (U, Th, K), SopectroLith logs (to acquire data for Fe, Si and Ti) and Elemental Capture Spectroscopy (ECS). The latter technique provided data for quartz, pyrite, carbonate, clay and Sulfur. In addition to this, the Gamma Ray (GR), Neutron Porosity (ΦN), deep Resistivity (Rt) and Bulk Density (ρb) logs were used to model bulk mineralogy and lithology. Biostratigraphic and complete

  16. Magmatism and petroleum exploration in the Brazilian Paleozoic basins

    Energy Technology Data Exchange (ETDEWEB)

    Thomaz Filho, Antonio; Antonioli, Luzia [Universidade do Estado do Rio de Janeiro, Faculdade de Geologia, Rua Sao Francisco Xavier, no 524/2030, CEP 20550-900, Rio de Janeiro, RJ (Brazil); Mizusaki, Ana Maria Pimentel [Universidade Federal do Rio Grande do Sul, Instituto de Geociencias, Avenida Bento Goncalves, no 9500, Campus do Vale, CEP 91509-900, Porto Alegre, RS (Brazil)

    2008-02-15

    Petroleum exploration in the Paleozoic sedimentary basins of Brazil has proven very challenging for explorationists. Except for the Solimoes Basin, in which transcurrent tectonism formed prospective structural highs, Brazilian Paleozoic basins lack intense structural deformation, and hence the detection and prospecting of place is often difficult. Magmatic intrusive and associated rocks in all these basins have traditionally been considered heat sources and hydrocarbon traps. The role of tholeiitic basic dikes in the generation, migration and accumulation of petroleum in the Anhembi oil occurrence (Sao Paulo State) is discussed herein. It follows that similar geological settings in other Paleozoic basins can be regarded as promising sites for oil accumulation that warrant investigation via modern geological and geophysical methods. (author)

  17. Ground penetrating radar study of a thickness of biogenic sediments in the vicinity of the Czechowskie Lake

    Science.gov (United States)

    Lamparski, Piotr

    2014-05-01

    The paper present results of investigations, which have made on a biogenic plain in the north-east part of the vicinity of the Czechowskie Lake. The basin of Lake Czechowskie occupies a deep depression located in the immediate hinterland of the maximum range of the Pomeranian Phase ice sheet in the northern part of Poland (Błaszkiewicz 2005). Drillings carried out within the peat plain in the western part of the lake basin indicate that there are relatively diversified lake sediments of up to 12 m in thickness. The ground penetrating radar profiling method (GPR) was used to determine a thickness of biogenic sediments. To tests was used GSS'I SIR SYSTEM-2000™ radar device with two antennae - the high resolution 400 MHz central frequency - for shallow prospecting of the subsurface layers and the low resolution 35 MHz - for determining the shape of the mineral bedrock. Overall, 33 GPR profiles was made all in all more than 3000 meters along and crosswise the longer axis of the biogenic plain. The range of radar penetration was set to 200 ns for 400 MHz antenna and 600 ns for the 35 MHz one, what is the equivalent respectively 4 m and 12,5 m in depth of biogenic sediments thickness. Horizontal scaling was made by GSSI survey wheel device. The thickness of biogenic sediments recognized by GPR reaches 10 meters only using 35 MHz antenna. In the case of the 400 MHz antenna, relatively high conductivity water-saturated peat and gyttia did not allow for the achievement of greater thickness than 3-4 meters testing. In a large part of the profiles was able to see the shape of the mineral bedrock in the form of a former lake basin. Also observed elevations and thresholds in the bedrock. Depth of the mineral deposits forming former lake bottom was confirmed by drillings. This study is a contribution to the Virtual Institute of Integrated Climate and Landscape Evolution Analysis -ICLEA- of the Helmholtz Association. References: Błaszkiewicz M, 2005. Późnoglacjalna i

  18. Nagra technical report 14-02, geological basics - Dossier II - Sediments and tectonic considerations; SGT Etappe 2: Vorschlag weiter zu untersuchender geologischer Standortgebiete mit zugehörigen Standortarealen für die Oberflächenanlage -- Geologische Grundlagen -- Dossier II -- Sedimentologische und tektonische Verhältnisse

    Energy Technology Data Exchange (ETDEWEB)

    Madritsch, H.; Deplazes, G.

    2014-12-15

    This dossier is the second of a series of eight reports concerning the safety and technical aspects of locations for the disposal of radioactive wastes in Switzerland. It considers the sediments that can be used and discusses tectonic considerations. As an introduction, the geological framework is discussed with the various sediments from the Paleozoic, Mesozoic and Cenozoic periods. The various methods used to investigate the rock, such as drilling and reflection-seismic methods along with the investigation of surface formations are discussed. A detailed discussion of the stratigraphic and sedimentological characteristics of the various formations follows. Geological structures and the tectonics in the proposed areas are discussed, as are the depth and thickness of the structures.

  19. Late Cretaceous and Cenozoic seafloor and oceanic basement roughness: Spreading rate, crustal age and sediment thickness correlations

    Science.gov (United States)

    Bird, Robert T.; Pockalny, Robert A.

    1994-05-01

    Single-channel seismic data from the South Australian Basin and Argentine Basin, and bathymetry data from the flanks of the Mid-Atlantic Ridge, East Pacific Rise and Southwest Indian Ridge are analysed to determine the root-mean-square (RMS) roughness of the seafloor and oceanic basement created at seafloor spreading rates ranging from 3 to 80 km/Ma (half-rate). For these data, crustal ages range from near zero to 85 Ma and sediment thicknesses range from near zero to over 2 km. Our results are consistent with a negative correlation of basement roughness and spreading rate where roughness decreases dramatically through the slow-spreading regime (oceanic basement roughness and spreading rate appears to have existed since the late Cretaceous for slow and intermediate spreading rates, suggesting that the fundamental processes creating abyssal hill topography may have remained the same for this time period. Basement roughness does not appear to decrease (smooth) with increasing crustal age, and therefore off-ridge degradation of abyssal hill topography by mass wasting is not detected by our data. Seismic data reveal that sediment thickness increases with increasing crustal age in the South Australian Basin and Argentine Basin, but not monotonically and with significant regional variation. We show that minor accumulations of sediment can affect roughness significantly. Average sediment accumulations of less that 50 m (for our 100 km long sample seismic profiles and half-spreading rates ocean ridges.

  20. Ontogenetic evidence for the Paleozoic ancestry of salamanders.

    Science.gov (United States)

    Schoch, Rainer R; Carroll, Robert L

    2003-01-01

    The phylogenetic positions of frogs, salamanders, and caecilians have been difficult to establish. Data matrices based primarily on Paleozoic taxa support a monophyletic origin of all Lissamphibia but have resulted in widely divergent hypotheses of the nature of their common ancestor. Analysis that concentrates on the character states of the stem taxa of the extant orders, in contrast, suggests a polyphyletic origin from divergent Paleozoic clades. Comparison of patterns of larval development in Paleozoic and modern amphibians provides a means to test previous phylogenies based primarily on adult characteristics. This proves to be highly informative in the case of the origin of salamanders. Putative ancestors of salamanders are recognized from the Permo-Carboniferous boundary of Germany on the basis of ontogenetic changes observed in fossil remains of larval growth series. The entire developmental sequence from hatching to metamorphosis is revealed in an assemblage of over 600 specimens from a single locality, all belonging to the genus Apateon. Apateon forms the most speciose genus of the neotenic temnospondyl family Branchiosauridae. The sequence of ossification of individual bones and the changing configuration of the skull closely parallel those observed in the development of primitive living salamanders. These fossils provide a model of how derived features of the salamander skull may have evolved in the context of feeding specializations that appeared in early larval stages of members of the Branchiosauridae. Larvae of Apateon share many unique derived characters with salamanders of the families Hynobiidae, Salamandridae, and Ambystomatidae, which have not been recognized in any other group of Paleozoic amphibians.

  1. Glacially striated, soft sediment surfaces on late Paleozoic tillite at São Luiz do Purunã, PR

    Directory of Open Access Journals (Sweden)

    Ivo Trosdtorf Jr.

    2005-06-01

    Full Text Available Striae and furrows found on the upper surfaces of three stratigraphically superposed decimetric beds of late Paleozoic lodgement tillite of the Itararé Subgroup in the northern Paraná Basin were engraved by ploughing of clasts and possibly also ice protuberances at the base of the glacier, on unconsolidated to partially consolidated sediment. Associated features indicate that the rheology of the bed varied from stiff during lodgement to soft and deformable during ploughing. Poor drainage of meltwater at the glacier-bed interface may have contributed to lower the strength of sediment to deformation. The deformed interval was probably generated during a single glacial phase or advance of a glacier grounding in a marine or lacustrine water body. Changes in the dynamics of the glacier involving slow and fast flow were correlated respectively with alternation of deposition and erosion. The proposed model is analogous to that of lodgement till complexes from the Pleistocene of the northern hemisphere. Retreat of the glacier was probably fast, followed by settling of muds on top of the upper striated and furrowed surface, and progradation of deltaic sands during post-glacial time.Estrias e sulcos encontrados sobre três camadas decimétricas, estratigraficamente superpostas, de tilito de alojamento neopaleozóico do Subgrupo Itararé, na porção norte da Bacia do Paraná, foram formados por aração de clastos e, possivelmente, por protuberâncias de gelo, na base da geleira. Feições associadas indicam que a reologia do sedimento variou de rígido, durante o alojamento, a inconsolidado e deformável durante a aração. A baixa drenagem da água de degelo na interface geleira-substrato pode ter contribuído para reduzir a resistência do sedimento à deformação. A sucessão acima foi gerada provavelmente durante uma única fase glacial ou avanço de geleira sobre corpo de água marinho ou lacustre. Mudanças na dinâmica da geleira envolvendo

  2. A paleozoic pangaea.

    Science.gov (United States)

    Boucot, A J; Gray, J

    1983-11-11

    Paleozoic paleogeographies should be consistent with all available, reliable data. However, comparison of three different Devonian paleogeographies that are based largely or wholly on the data of remanent magnetism show them to be inconsistent in many regards. When these three paleogeographies are provided with possible ocean surface current circulation patterns, and have added to them lithofacies and biogeographic data, they also are shown to be inconsistent with such data. A pangaeic reconstruction positioned in the Southern Hemisphere permits the lithofacies and biogeographical data to be reconciled in a plausible manner.

  3. A review on late Paleozoic ice-related erosional landforms in the Paraná Basin: origin and paleogeographical implications

    Directory of Open Access Journals (Sweden)

    Eduardo Luiz Menozzo da Rosa

    Full Text Available ABSTRACT: The Late Paleozoic Ice Age is recorded in the Paraná Basin as glacial deposits, deformational features and ice-related erosional landforms of the Itararé Group. Erosional landforms are often employed to build paleogeographic models that depict the location of ice masses and paleo ice-flow directions. This paper provides a review of the literature and new data on micro- to meso-scale ice-related, erosional landforms of the Paraná Basin. Examined landforms can be placed into four broad categories based on their mode of origin. Subglacial landforms on rigid substrates occur on the Precambrian basement or on older units in the Paraná Basin. They include streamlined landforms and striated pavements formed by abrasion and/or plucking beneath advancing glaciers. Subglacial landforms on soft beds are intraformational surfaces generated by erosion and deformation of unconsolidated deposits when overridden by glaciers. Ice-keel scour marks are soft-sediment striated/grooved landforms developed by the scouring of free-floating ice masses on underlying sediments. Striated clast pavements are horizons containing aligned clasts that are abraded subglacially due to the advance of glaciers on unconsolidated deposits. Only those erosional landforms formed subglacially can be used as reliable paleo ice-flow indicators. Based on these data, the paleogeography of the Paraná Basin during the Late Paleozoic Ice Age fits into a model of several glacial lobes derived from topographically-controlled ice spreading centers located around the basin instead of a single continental ice sheet.

  4. Johnson City 10 x 20 NTMS area, Kentucky, North Carolina, Tennessee, and Virginia: data report (abbreviated). National Uranium Resource Evaluation program, hydrogeochemical and stream sediment reconnaissance

    International Nuclear Information System (INIS)

    Fay, W.M.

    1980-10-01

    Results of ground water and stream sediment reconnaissance in the National Topographic Map Series (NTMS) Johnson City 1 0 x 2 0 quadrangle are presented. Surface sediment samples were collected at 959 sites. Ground water samples were collected at 1099 sites. Neutron activation analysis results are given for uranium and 16 other elements in sediments, and for uranium and 8 other elements in ground water. Data from ground water sites include: (1) water chemistry measurements (pH, conductivity, and alkalinity); (2) physical measurements where applicable (water temperature, well description, etc.); and (3) elemental analyses (U, Al, Br, Cl, Dy, F, Mn, Na, and V). Data from sediment sites include: (1) stream water chemistry measurements; and (2) elemental analyses for sediment samples (U, Th, Hf, Al, Ce, Dy, Eu, Fe, La, Lu, Mn, Sc, Sm, Na, Ti, V, and Yb). Sample site descriptors (stream characteristics, vegetation, etc.) are given. Areal distribution maps, histograms, and cumulative frequency plots for most elements and for U/Th and U/Hf ratios are included on the microfiche. The Johnson City Quadrangle is underlain by Precambrian cyrstalline rocks in the southeastern corner of the quadrangle and by Paleozoic sediments in the remainder of the quadrangle. The highest uranium concentrations in sediments (up to 22 ppM) are in samples from the Precambrian crystalline rock areas. These samples also have high thorium concentrations suggesting that most of the uranium is in resistate minerals such as monazite. The U/Th ratios in sediment samples are generaly low with the higher values (up to 2.07) mostly within the lower Paleozoic sediments, particularly the Copper Ridge Dolomite. The uranium concentration in ground water is also highest in the lower Paleozoic sediments

  5. Effect of Hydrograph Separation on Suspended Sediment Concentration Predictions in a Forested Headwater with Thick Soil and Weathered Gneiss Layers

    Directory of Open Access Journals (Sweden)

    Naoki Kabeya

    2014-06-01

    Full Text Available Two-component hydrograph separation using oxygen-18 concentrations was conducted at a sediment runoff observation weir installed in a small subcatchment of a forested gneiss catchment in Japan. The mean soil thickness of this catchment is 7.27 m, which comprises 3.29 m of brown forest soil (A and B layers and a 3.98-m layer of heavily weathered gneiss. Data were collected for a storm on 20–21 May 2003, and the percentage of event water separated by the stable isotope ratio in comparison with the total rainfall amount was about 1%. This value is within the ratio of a riparian zone in a drainage area. Temporal variation of suspended sediment concentration exhibited higher correlation with the event water component than with the total runoff or pre-event water component. This shows that the riparian zone causes rainwater to flow out quickly during a rain event, and that this is an important area of sediment production and transportation in a forested headwater with thick soil and weathered gneiss layers.

  6. Aerial gamma ray and magnetic survey: Mississippi and Florida airborne survey, Russellville quadrangle, Arkansas

    International Nuclear Information System (INIS)

    1980-09-01

    The Russellville quadrangle in north central Arkansas overlies thick Paleozoic sediments of the Arkoma Basin. These Paleozoics dominate surface exposure except where covered by Quaternary alluvial materials. Examination of available literature shows no known uranium deposits (or occurrences) within the quadrangle. Eighty-eight groups of uranium samples were defined as anomalies and are discussed briefly. None were considered significant, and most appeared to be of cultural origin. Magnetic data show character that suggest structural and/or lithologic complexity, but imply relatively deep-seated sources

  7. Aerial gamma ray and magnetic survey: Mississippi and Florida airborne survey, Fort Smith quadrangle, Oklahoma, and Arkansas. Final report

    International Nuclear Information System (INIS)

    1980-09-01

    The Fort Smith quadrangle in western Arkansas and eastern Oklahoma overlies thick Paleozoic sediments of the Arkoma Basin. These Paleozoics dominate surface exposure except where covered by Quaternary Alluvial materials. Examination of available literature shows no known uranium deposits (or occurrences) within the quadrangle. Seventy-five groups of uranium samples were defined as anomalies and are discussed briefly. None were considered significant, and most appeared to be of cultural origin. Magnetic data show character that suggest structural and/or lithologic complexity, but imply relatively deep-seated sources

  8. Gravity anomalies and flexure of the lithosphere at the Middle Amazon Basin, Brazil

    Science.gov (United States)

    Nunn, Jeffrey A.; Aires, Jose R.

    1988-01-01

    The Middle Amazon Basin is a large Paleozoic sedimentary basin on the Amazonian craton in South America. It contains up to 7 km of mainly shallow water sediments. A chain of Bouguer gravity highs of approximately +40 to +90 mGals transects the basin roughly coincident with the axis of maximum thickness of sediment. The gravity highs are flanked on either side by gravity lows of approximately -40 mGals. The observed gravity anomalies can be explained by a steeply sided zone of high density in the lower crust varying in width from 100 to 200 km wide. Within this region, the continental crust has been intruded/replaced by more dense material to more than half its original thickness of 45-50 km. The much wider sedimentary basin results from regional compensation of the subsurface load and the subsequent load of accumulated sediments by flexure of the lithosphere. The observed geometry of the basin is consistent with an elastic lithosphere model with a mechanical thickness of 15-20 km. Although this value is lower than expected for a stable cratonic region of Early Proterozoic age, it is within the accepted range of effective elastic thicknesses for the earth. Rapid subsidence during the late Paleozoic may be evidence of a second tectonic event or lithospheric relaxation which could lower the effective mechanical thickness of the lithosphere. The high-density zone in the lower crust, as delineated by gravity and flexural modeling, has a complex sinuous geometry which is narrow and south of the axis of maximum sediment thickness on the east and west margins and wide and offset to the north in the center of the basin. The linear trough geometry of the basin itself is a result of smoothing by regional compensation of the load in the lower crust.

  9. Paleozoic in situ spores and pollen. Lycopsida

    Czech Academy of Sciences Publication Activity Database

    Bek, Jiří

    2017-01-01

    Roč. 296, 1/6 (2017), s. 1-111 ISSN 0375-0299 R&D Projects: GA ČR GAP210/12/2053 Institutional support: RVO:67985831 Keywords : in situ spores * reproductive organs * Lycopsida * Paleozoic Sub ject RIV: DB - Geology ; Mineralogy OBOR OECD: Paleontology Impact factor: 1.333, year: 2016

  10. Using H/V Spectral Ratio Analysis to Map Sediment Thickness and to Explain Macroseismic Intensity Variation of a Low-Magnitude Seismic Swarm in Central Belgium

    Science.gov (United States)

    Van Noten, K.; Lecocq, T.; Camelbeeck, T.

    2013-12-01

    Between 2008 and 2010, the Royal Observatory of Belgium received numerous ';Did You Feel It'-reports related to a 2-year lasting earthquake swarm at Court-Saint-Etienne, a small town in a hilly area 20 km SE of Brussels, Belgium. These small-magnitude events (-0.7 ≤ ML ≤ 3.2, n = c. 300 events) were recorded both by the permanent seismometer network in Belgium and by a locally installed temporary seismic network deployed in the epicentral area. Relocation of the hypocenters revealed that the seismic swarm can be related to the reactivation of a NW-SE strike-slip fault at 3 to 6 km depth in the basement rocks of the Lower Palaeozoic London-Brabant Massif. This sequence caused a lot of emotion in the region because more than 60 events were felt by the local population. Given the small magnitudes of the seismic swarm, most events were more often heard than felt by the respondents, which is indicative of a local high-frequency earthquake source. At places where the bedrock is at the surface or where it is covered by thin alluvial sediments ( 30 m). In those river valleys that have a considerable alluvial sedimentary cover, macroseismic intensities are again lower. To explain this variation in macroseismic intensity we present a macroseismic analysis of all DYFI-reports related to the 2008-2010 seismic swarm and a pervasive H/V spectral ratio (HVSR) analysis of ambient noise measurements to model the thickness of sediments covering the London-Brabant Massif. The HVSR method is a very powerful tool to map the basement morphology, particularly in regions of unknown subsurface structure. By calculating the soil's fundamental frequency above boreholes, we calibrated the power-law relationship between the fundamental frequency, shear wave velocity and the thickness of sediments. This relationship is useful for places where the sediment thickness is unknown and where the fundamental frequency can be calculated by H/V spectral ratio analysis of ambient noise. In a

  11. Geologic map and upper Paleozoic stratigraphy of the Marble Canyon area, Cottonwood Canyon quadrangle, Death Valley National Park, Inyo County, California

    Science.gov (United States)

    Stone, Paul; Stevens, Calvin H.; Belasky, Paul; Montañez, Isabel P.; Martin, Lauren G.; Wardlaw, Bruce R.; Sandberg, Charles A.; Wan, Elmira; Olson, Holly A.; Priest, Susan S.

    2014-01-01

    This geologic map and pamphlet focus on the stratigraphy, depositional history, and paleogeographic significance of upper Paleozoic rocks exposed in the Marble Canyon area in Death Valley National Park, California. Bedrock exposed in this area is composed of Mississippian to lower Permian (Cisuralian) marine sedimentary rocks and the Jurassic Hunter Mountain Quartz Monzonite. These units are overlain by Tertiary and Quaternary nonmarine sedimentary deposits that include a previously unrecognized tuff to which we tentatively assign an age of late middle Miocene (~12 Ma) based on tephrochronologic analysis, in addition to the previously recognized Pliocene tuff of Mesquite Spring. Mississippian and Pennsylvanian rocks in the Marble Canyon area represent deposition on the western continental shelf of North America. Mississippian limestone units in the area (Tin Mountain, Stone Canyon, and Santa Rosa Hills Limestones) accumulated on the outer part of a broad carbonate platform that extended southwest across Nevada into east-central California. Carbonate sedimentation was interrupted by a major eustatic sea-level fall that has been interpreted to record the onset of late Paleozoic glaciation in southern Gondwana. Following a brief period of Late Mississippian clastic sedimentation (Indian Springs Formation), a rise in eustatic sea level led to establishment of a new carbonate platform that covered most of the area previously occupied by the Mississippian platform. The Pennsylvanian Bird Spring Formation at Marble Canyon makes up the outer platform component of ten third-order (1 to 5 m.y. duration) stratigraphic sequences recently defined for the regional platform succession. The regional paleogeography was fundamentally changed by major tectonic activity along the continental margin beginning in middle early Permian time. As a result, the Pennsylvanian carbonate shelf at Marble Canyon subsided and was disconformably overlain by lower Permian units (Osborne Canyon and

  12. Carboniferous - Early Permian magmatic evolution of the Bogda Range (Xinjiang, NW China): Implications for the Late Paleozoic accretionary tectonics of the SW Central Asian Orogenic Belt

    Science.gov (United States)

    Wali, Guzalnur; Wang, Bo; Cluzel, Dominique; Zhong, Linglin

    2018-03-01

    The Late Paleozoic magmatic evolution of the Bogda Range (Chinese North Tianshan) is important for understanding the accretionary history of the Central Asian Orogenic Belt. We investigated the Carboniferous and Lower Permian volcanic and sedimentary sequences of the Daheyan section, southern Bogda Range, and present new zircon U-Pb ages and whole-rock geochemical data for the volcanic rocks. One Carboniferous rhyolite is dated at 298 ± 8 Ma; a Permian basalt yielded many Proterozoic zircon xenocrysts, and its maximum age (∼297 Ma) is constrained by the detrital zircon ages of the sandstone that stratigraphically underlies it. These volcanic rocks belong to calc-alkaline series. We further synthesize previous geochronological, geochemical and isotopic data of magmatic and sedimentary rocks in the Bogda Range. The available data indicate that the magmatism occurred continuously from 350 Ma to 280 Ma. A comprehensive analysis allows us to propose that: (1) the Carboniferous to Early Permian magmatic rocks of the Bogda Range generally show consistent arc-type features; (2) increasing mantle input through time suggests intra-arc extension in a supra-subduction zone; (3) the localized occurrence of Early Permian alkaline pillow basalts and deep water sediments close to the major shear zone advocate a transtensional crustal thinning during the transition from Carboniferous convergence to Early Permian transcurrent tectonics; (4) occurrence of a large number of Proterozoic zircon xenocrysts in the Late Paleozoic magmatic rocks, and Proterozoic detrital zircons in the coeval clastic sediments suggest a continental or transitional basement of the Bogda Arc; (5) subduction in the Bogda area terminated prior to the deposition of Middle Permian terrestrial sediments.

  13. Collection, processing, and interpretation of ground-penetrating radar data to determine sediment thickness at selected locations in Deep Creek Lake, Garrett County, Maryland, 2007

    Science.gov (United States)

    Banks, William S.L.; Johnson, Carole D.

    2011-01-01

    The U.S. Geological Survey collected geophysical data in Deep Creek Lake in Garrett County, Maryland, between September 17 through October 4, 2007 to assist the Maryland Department of Natural Resources to better manage resources of the Lake. The objectives of the geophysical surveys were to provide estimates of sediment thickness in shallow areas around the Lake and to test the usefulness of three geophysical methods in this setting. Ground-penetrating radar (GPR), continuous seismic-reflection profiling (CSP), and continuous resistivity profiling (CRP) were attempted. Nearly 90 miles of GPR radar data and over 70 miles of CSP data were collected throughout the study area. During field deployment and testing, CRP was determined not to be practical and was not used on a large scale. Sediment accumulation generally could be observed in the radar profiles in the shallow coves. In some seismic profiles, a thin layer of sediment could be observed at the water bottom. The radar profiles appeared to be better than the seismic profiles for the determination of sediment thickness. Although only selected data profiles were processed, all data were archived for future interpretation.

  14. Origin and tectonic evolution of early Paleozoic arc terranes abutting the northern margin of North China Craton

    Science.gov (United States)

    Zhou, Hao; Pei, Fu-Ping; Zhang, Ying; Zhou, Zhong-Biao; Xu, Wen-Liang; Wang, Zhi-Wei; Cao, Hua-Hua; Yang, Chuan

    2017-12-01

    The origin and tectonic evolution of the early Paleozoic arc terranes abutting the northern margin of the North China Craton (NCC) are widely debated. This paper presents detrital zircon U-Pb and Hf isotopic data of early Paleozoic strata in the Zhangjiatun arc terrane of central Jilin Province, northeast (NE) China, and compares them with the Bainaimiao and Jiangyu arc terranes abutting the northern margin of the NCC. Detrital zircons from early Paleozoic strata in three arc terranes exhibit comparable age groupings of 539-430, 1250-577, and 2800-1600 Ma. The Paleoproterozoic to Neoarchean ages and Hf isotopic composition of the detrital zircons imply the existence of the Precambrian fragments beneath the arc terranes. Given the evidences from geology, igneous rocks, and detrital zircons, we proposed that the early Paleozoic arc terranes abutting the northern margin of the NCC are a united arc terrane including the exotic Precambrian fragments, and these fragments shared a common evolutionary history from Neoproterozoic to early-middle Paleozoic.

  15. The impact of fire on the Late Paleozoic Earth System

    Directory of Open Access Journals (Sweden)

    Ian J. Glasspool

    2015-09-01

    Full Text Available Analyses of bulk petrographic data indicate that during the Late Paleozoic wildfires were more prevalent than at present. We propose that the development of fire systems through this interval was controlled predominantly by the elevated atmospheric oxygen concentration (p(O2 that mass balance models predict prevailed. At higher levels of p(O2, increased fire activity would have rendered vegetation with high moisture contents more susceptible to ignition and would have facilitated continued combustion. We argue that coal petrographic data indicate that p(O2 rather than global temperatures or climate, resulted in the increased levels of wildfire activity observed during the Late Paleozoic and can therefore be used to predict it. These findings are based upon analyses of charcoal volumes in multiple coals distributed across the globe and deposited during this time period, and that were then compared with similarly diverse modern peats and Cenozoic lignites and coals. Herein, we examine the environmental and ecological factors that would have impacted fire activity and we conclude that of these factors p(O2 played the largest role in promoting fires in Late Paleozoic peat-forming environments and, by inference, ecosystems generally, when compared with their prevalence in the modern world.

  16. The impact of fire on the Late Paleozoic Earth system.

    Science.gov (United States)

    Glasspool, Ian J; Scott, Andrew C; Waltham, David; Pronina, Natalia; Shao, Longyi

    2015-01-01

    Analyses of bulk petrographic data indicate that during the Late Paleozoic wildfires were more prevalent than at present. We propose that the development of fire systems through this interval was controlled predominantly by the elevated atmospheric oxygen concentration (p(O2)) that mass balance models predict prevailed. At higher levels of p(O2), increased fire activity would have rendered vegetation with high-moisture contents more susceptible to ignition and would have facilitated continued combustion. We argue that coal petrographic data indicate that p(O2) rather than global temperatures or climate, resulted in the increased levels of wildfire activity observed during the Late Paleozoic and can, therefore, be used to predict it. These findings are based upon analyses of charcoal volumes in multiple coals distributed across the globe and deposited during this time period, and that were then compared with similarly diverse modern peats and Cenozoic lignites and coals. Herein, we examine the environmental and ecological factors that would have impacted fire activity and we conclude that of these factors p(O2) played the largest role in promoting fires in Late Paleozoic peat-forming environments and, by inference, ecosystems generally, when compared with their prevalence in the modern world.

  17. Paleozoic subduction complex and Paleozoic-Mesozoic island-arc volcano-plutonic assemblages in the northern Sierra terrane

    Science.gov (United States)

    Hanson, Richard E.; Girty, Gary H.; Harwood, David S.; Schweickert, Richard A.

    2000-01-01

    This field trip provides an overview of the stratigraphic and structural evolution of the northern Sierra terrane, which forms a significant part of the wall rocks on the western side of the later Mesozoic Sierra Nevada batholith in California. The terrane consists of a pre-Late Devonian subduction complex (Shoo Fly Complex) overlain by submarine arc-related deposits that record the evolution of three separate island-arc systems in the Late Sevonian-Early Mississippian, Permian, and Late Triassic-Jurassic. The two Paleozoic are packages and the underlying Shoo Fly Complex have an important bearing on plate-tectonic processes affecting the convergent margin outboard of the Paleozoic Cordilleran miogeocline, although their original paleogeographic relations to North America are controversial. The third arc package represents an overlap assemblage that ties the terrane to North America by the Late Triassic and helps constrain the nature and timing of Mesozoic orogenesis. Several of the field-trip stops examine the record of pre-Late Devonian subduction contained in the Shoo Fly Complex, as well as the paleovolcanology of the overlying Devonian to Jurassic arc rocks. Excellent glaciated exposures provide the opportunity to study a cross section through a tilted Devonian volcano-plutonic association. Additional stops focus on plutonic rocks emplaced during the Middle Jurassic arc magmatism in the terrane, and during the main pulse of Cretaceous magmatism in the Sierra Nevada batholith to the east.

  18. Paleozoic and Mesozoic deformations in the central Sierra Nevada, California

    Science.gov (United States)

    Nokleberg, Warren J.; Kistler, Ronald Wayne

    1980-01-01

    Analysis of structural and stratigraphic data indicates that several periods of regional deformation, consisting of combined folding, faulting, cataclasis, and regional metamorphism, occurred throughout the central Sierra Nevada during Paleozoic and Mesozoic time. The oldest regional deformation occurred alono northward trends during the Devonian and Mississippian periods in most roof pendants containing lower Paleozoic metasedimentary rocks at the center and along the crest of the range. This deformation is expressed in some roof pendants by an angular unconformity separating older thrice-deformed from younger twice-deformed Paleozoic metasedimentary rocks. The first Mesozoic deformation, which consisted of uplift and erosion and was accompanied by the onset of Andean-type volcanism during the Permian and Triassic, is expressed by an angular unconformity in several roof pendants from the Saddlebag Lake to the Mount Morrison areas. This unconformity is defined by Permian and Triassic andesitic to rhyolitic metavolcanic rocks unconformably overlying more intensely deformed Pennsylvanian, Permian(?), and older metasedimentary rocks. A later regional deformation occurred during the Triassic along N. 20?_30? W. trends in Permian and Triassic metavolcanic rocks of the Saddlebag Lake and Mount Dana roof pendants, in upper Paleozoic rocks of the Pine Creek roof pendant, and in the Calaveras Formation of the western metamorphic belt; the roof pendants are crosscut by Upper Triassic granitic rocks of the Lee Vining intrusive epoch. A still later period of Early and Middle Jurassic regional deformation occurred along N. 30?-60? E. trends in upper Paleozoic rocks of the Calaveras Formation of the western metamorphic belt. A further period of deformation was the Late Jurassic Nevadan orogeny, which occurred along N. 20?_40? W. trends in Upper Jurassic rocks of the western metamorphic belt that are crosscut by Upper Jurassic granitic rocks of the Yosemite intrusive epoch

  19. Quaternary sediment thickness and bedrock topography of the glaciated United States east of the Rocky Mountains

    Science.gov (United States)

    Soller, David R.; Garrity, Christopher P.

    2018-01-26

    Beginning roughly 2.6 million years ago, global climate entered a cooling phase known as the Pleistocene Epoch. As snow in northern latitudes compacted into ice several kilometers thick, it flowed as glaciers southward across the North American continent. These glaciers extended across the northern United States, dramatically altering the landscape they covered. East of the Rocky Mountains, the ice coalesced into continental glaciers (called the Laurentide Ice Sheet) that at times blanketed much of the north-central and northeastern United States. To the west of the Laurentide Ice Sheet, glaciers formed in the mountains of western Canada and the United States and coalesced into the Cordilleran ice sheet; this relatively smaller ice mass extended into the conterminous United States in the northernmost areas of western Montana, Idaho, and Washington. Throughout the Pleistocene, landscape alteration occurred by (1) glacial erosion of the rocks and sediments; (2) redeposition of the eroded earth materials in a form substantially different from their source rocks, in terms of texture and overall character; and (3) disruption of preexisting drainage patterns by the newly deposited sediments. In many cases, pre-glacial drainage systems (including, for example, the Mississippi River) were rerouted because their older drainage courses became blocked with glacial sediment.The continental glaciers advanced and retreated many times across those areas. During each ice advance, or glaciation, erosion and deposition occurred, and the landscape was again altered. Through successive glaciations, the landscape and the bedrock surface gradually came to resemble their present configurations. As continental ice sheets receded and the Pleistocene ended, erosion and deposition of sediment (for example in stream valleys) continued to shape the landscape up to the present day (albeit to a lesser extent than during glaciation). The interval of time since the last recession of the glaciers

  20. Measurement of sediments thickness by ground penetrating radar; Denjihaho wo mochiita kotei taisekibutsu soatsu no sokutei

    Energy Technology Data Exchange (ETDEWEB)

    Nozawa, E [Tokyo Electric Power Co. Inc., Tokyo (Japan); Inagaki, M

    1997-05-27

    An attempt was made to measure thickness of a layer of reservoir bottom sediments by utilizing the electromagnetic reflection method. Because water is a substance difficult for electromagnetic waves to permeate, considerations were given on to suppress attenuation to a minimum, and improve receiving sensitivity. The test used monocycle pulses with a central frequency of 200 MHz. In order to generate stabilized pulses with little unnecessary reflection, an antenna as large as it can be fitted into a rubber boat was employed. In order to acquire referential data, the test was carried out by using simultaneously a sound wave exploration device. The lake at which the test was carried out is a regulating reservoir with a size of about 250 m {times} 150 m, with its bottom made of concrete slab. This means that the lake consists of a three-layer structure comprising water, soil deposits, and concrete bottom from the water surface. According to an example of acquired electromagnetic exploration records, boundary reflection of water and sediments was observed clearly at water depths of 2 to 3 m as a shallow portion and 5 to 6 m as a deep portion. Reflection between the sediments and the bottom plate was also observed sufficiently distinctly. 3 refs., 8 figs.

  1. End Late Paleozoic tectonic stress field in the southern edge of Junggar Basin

    Directory of Open Access Journals (Sweden)

    Wei Ju

    2012-09-01

    Full Text Available This paper presents the end Late Paleozoic tectonic stress field in the southern edge of Junggar Basin by interpreting stress-response structures (dykes, folds, faults with slickenside and conjugate joints. The direction of the maximum principal stress axes is interpreted to be NW–SE (about 325°, and the accommodated motion among plates is assigned as the driving force of this tectonic stress field. The average value of the stress index R′ is about 2.09, which indicates a variation from strike-slip to compressive tectonic stress regime in the study area during the end Late Paleozoic period. The reconstruction of the tectonic field in the southern edge of Junggar Basin provides insights into the tectonic deformation processes around the southern Junggar Basin and contributes to the further understanding of basin evolution and tectonic settings during the culmination of the Paleozoic.

  2. Isotopic tracers of gold deposition in Paleozoic limestones, Southern Nevada

    International Nuclear Information System (INIS)

    Peterman, Z.E.; Widmann, B.L.; Marshall, B.D.; Aleinikoff, J.N.; Futa, K.; Mahan, S.A.

    1994-01-01

    Strontium isotopic analyses of barren and mineralized Paleozoic carbonate rocks show that hydrothermal fluids added radiogenic strontium ( 87 Sr) to the mineralized zones. At Bare Mountain, samples collected from mineralized areas have δ 87 Sr t values ranging from +3.0 to +23.0, whereas unmineralized carbonate rocks have δ 87 Sr, values of -0.6 to +2.9. In other ranges, δ 87 Sr, values of the unmineralized carbonate rocks are even lower and virtually indistinguishable from primary marine values. This correlation of elevated δ 87 Sr t values with mineralized zones provides a useful technique for assessing the mineral potential of the Paleozoic basement beneath Yucca Mountain, and may find broader use in mineral exploration in the Basin and Range province as a whole

  3. Environmental control on concretion-forming processes: Examples from Paleozoic terrigenous sediments of the North Gondwana margin, Armorican Massif (Middle Ordovician and Middle Devonian) and SW Sardinia (Late Ordovician)

    Science.gov (United States)

    Dabard, Marie-Pierre; Loi, Alfredo

    2012-08-01

    Concretions of various compositions are common in the Paleozoic terrigenous successions of the north Gondwana margin. This study focuses on phosphatic (P) and siliceous (Si) concretions present in some successions of the Armorican Massif (NW France) and SW Sardinia (W Italy). It shows that they consist of mudstones, fine- to very fine-grained sandstones or shellbeds with a more or less abundant P-cement and form a continuum between a phosphatic end-member and a siliceous biogenic end-member. The P2O5 contents are ranging from 0.26% to 21.5% and are related to apatite. The SiO2 contents vary from 25% to 82% and are linked both to a terrigenous phase and to a biogenic silica phase. Concretions showing the lower P-contents (P2O5 5). Comparison with the surrounding sediments shows that all the concretions are enriched in chlorite and in Middle Rare Earth Elements (Las/Gds: 0.12-0.72) and some of them in Y (up to 974 ppm), Rare Earth Elements (more than 300 ppm) and Sr (260-880 ppm). The concretions with highest biogenic silica concentrations are contained in the outer shelf sediments whereas the other concretions are present from the proximal part of the inner shelf to the outer shelf. A genetic model in two stages is proposed. During early diagenesis, the dissolution of shells and degradation of organic matter progressively enrich the pore water in dissolved Si, Ca and P. When the suboxic zone is reached, P-precipitation begins, leading to the formation of protoconcretions. In shallow environments, the relative permeability of sediments and the winnowing or reworking of the upper few centimetres by bottom currents allow for suboxic conditions to be maintained, leading to P-rich concretion formation. In deeper environments, the anoxic zone is reached more rapidly, thereby preventing extensive phosphogenesis. Nevertheless in the protoconcretions the early P-cement preserves pore spaces from compaction. In the presence of biogenic siliceous particles, the fluids are

  4. Eclogite-facies metamorphism in impure marble from north Qaidam orogenic belt: Geodynamic implications for early Paleozoic continental-arc collision

    Science.gov (United States)

    Chen, Xin; Xu, Rongke; Schertl, Hans-Peter; Zheng, Youye

    2018-06-01

    In the North Qaidam ultrahigh-pressure (UHP) metamorphic belt, impure marble and interbedded eclogite represent a particular sedimentary provenance and tectonic setting, which have important implications for a controversial problem - the dynamic evolution of early Paleozoic subduction-collision complexes. In this contribution, detailed field work, mineral chemistry, and whole-rock geochemistry are presented for impure marble to provide the first direct evidence for the recycling of carbonate sediments under ultrahigh-pressures during subduction and collision in the Yuka terrane, in the North Qaidam UHP metamorphic belt. According to conventional geothermobarometry, pre-peak subduction to 0.8-1.3 GPa/485-569 °C was followed by peak UHP metamorphism at 2.5-3.3 GPa/567-754 °C and cooling to amphibolite facies conditions at 0.6-0.7 GPa/571-589 °C. U-Pb dating of zircons from impure marble reveals a large group with ages ranging from 441 to 458 Ma (peak at 450 Ma), a smaller group ranging from 770 to 1000 Ma (peak at 780 Ma), and minor >1.8 Ga zircon aged ca. 430 Ma UHP metamorphism. The youngest detrital zircons suggest a maximum depositional age of ca. 442 Ma and a burial rate of ca. 1.0-1.1 cm/yr when combined with P-T conditions and UHP metamorphic age. The REE and trace element patterns of impure marble with positive Sr and U anomalies, negative high field strength elements (Nb, Ta, Zr, Hf, and Ti), and Ce anomalies imply that the marble had a marine limestone precursor. Impure marble intercalated with micaschist and eclogite was similar to limestone and siltstone protoliths deposited in continental fore-arc or arc setting with basic volcanic activity. Therefore, the Yuka terrane most likely evolved in a continental island arc setting during the Paleozoic. These data suggest that metasediments were derived from a mixture of Proterozoic continental crust and juvenile early Paleozoic oceanic and/or island arc crust. In addition, their protoliths were likely

  5. Bedded Barite Deposits from Sonora (nw Mexico): a Paleozoic Analog for Modern Cold Seeps

    Science.gov (United States)

    Canet, C.; Anadón, P.; González-Partida, E.; Alfonso, P.; Rajabi, A.; Pérez-Segura, E.; Alba-Aldave, L. A.

    2013-05-01

    The Mazatán barite deposits represent an outstanding example of Paleozoic bedded barite, a poorly understood type of mineral deposit of major economic interest. The largest barite bodies of Mazatán are hosted within an Upper Carboniferous flysch succession, which formed part of an accretionary wedge related to the subduction of the Rheic Ocean beneath Gondwana. As well, a few barite occurrences are hosted in Upper Devonian, pre-orogenic turbidites. A variety of mineralized structures is displayed by barite, including: septaria nodules, enterolitic structures, rosettes and debris-flow conglomerates. Barite is accompanied by chalcedony, pyrite (framboids) and berthierine. Gas-rich fluid inclusions in barite were analyzed by Raman spectroscopy and methane was identified, suggesting the occurrence of light hydrocarbons in the environment within which barite precipitated. 13C-depleted carbonates (δ13C: -24.3 to -18.8‰) were found in the barite deposits; they formed through anaerobic oxidation of methane coupled to sulfate reduction, and yield negative δ18O values (-11.9 to -5.2‰) reflecting the isotopic composition of Devonian-Carboniferous seawater. Methane-derived carbonates occur in modern hydrocarbon seeps and have been reported from Mesozoic and Cenozoic seep sediments, but they have never before been described in Paleozoic bedded barite deposits. δ34S of barite varies from +17.6 to +64.1‰, with the lowest values overlapping the range for coeval seawater sulfate; this distribution indicates a process of sulfate reduction. Barite precipitation can be explained by mixing of methane- and barium-rich fluids with pore-water (seawater) containing sulfate residual from microbial reduction. Two analyses from barite gave an 87Sr/86Sr within and slightly above the range for seawater at the time of deposition, with 0.708130 and 0.708588, which would preclude the involvement of hydrothermal fluids in the mineralization process.

  6. Interplay between spatially explicit sediment sourcing, hierarchical river-network structure, and in-channel bed material sediment transport and storage dynamics

    Science.gov (United States)

    Czuba, Jonathan A.; Foufoula-Georgiou, Efi; Gran, Karen B.; Belmont, Patrick; Wilcock, Peter R.

    2017-05-01

    Understanding how sediment moves along source to sink pathways through watersheds—from hillslopes to channels and in and out of floodplains—is a fundamental problem in geomorphology. We contribute to advancing this understanding by modeling the transport and in-channel storage dynamics of bed material sediment on a river network over a 600 year time period. Specifically, we present spatiotemporal changes in bed sediment thickness along an entire river network to elucidate how river networks organize and process sediment supply. We apply our model to sand transport in the agricultural Greater Blue Earth River Basin in Minnesota. By casting the arrival of sediment to links of the network as a Poisson process, we derive analytically (under supply-limited conditions) the time-averaged probability distribution function of bed sediment thickness for each link of the river network for any spatial distribution of inputs. Under transport-limited conditions, the analytical assumptions of the Poisson arrival process are violated (due to in-channel storage dynamics) where we find large fluctuations and periodicity in the time series of bed sediment thickness. The time series of bed sediment thickness is the result of dynamics on a network in propagating, altering, and amalgamating sediment inputs in sometimes unexpected ways. One key insight gleaned from the model is that there can be a small fraction of reaches with relatively low-transport capacity within a nonequilibrium river network acting as "bottlenecks" that control sediment to downstream reaches, whereby fluctuations in bed elevation can dissociate from signals in sediment supply.

  7. New data on the Paleozoic of the Semipalatinsk test site

    International Nuclear Information System (INIS)

    Ergaliev, G.Kh.; Myasnikov, A.K.; Nikitin, I.F.; Polyanskij, N.V.; Sergeeva, L.V.; Sergieva, M.N.; Sal'menova, L.T.; Utegulov, M.T.; Tsaj, D.T.; Shuzhanov, V.M.

    1998-01-01

    The latest data on Paleozoic of the Semipalatinsk test site acquired as result of the stratigraphic and pale ontological investigation which have been conducted for the first time after 46-year interval in geological studies are presented. (author)

  8. The Juchatengo complex: an upper-level ophiolite assemblage of late Paleozoic age in Oaxaca, southern Mexico

    Science.gov (United States)

    Grajales-Nishimura, José Manuel; Ramos-Arias, Mario Alfredo; Solari, Luigi; Murillo-Muñetón, Gustavo; Centeno-García, Elena; Schaaf, Peter; Torres-Vargas, Ricardo

    2018-04-01

    The Juchatengo complex (JC) suite is located between the Proterozoic Oaxacan complex to the north and the Xolapa complex to the south, and was amalgamated by late Paleozoic magmatism. It consists of mafic and sedimentary rocks that have oceanic affinities, with internal pseudostratigraphic, structural and metamorphic characteristics, which resemble a typical upper-level ophiolite assemblage. New U-Pb zircon and previous hornblende K-Ar analyses yield ages of ca. 291-313 Ma (U-Pb) for plagiogranites and ca. 282-277 Ma for tonalites intruding the entire sequence, including pelagic sediments at the top, with a maximum deposition age of ca. 278 Ma and noteworthy local provenance. These data constrain the age of the JC to the Late Pennsylvanian-Early Permian period. Hf isotopic analyses obtained from zircons in the JC plagiogranite and tonalite show that they come from a similar primitive mantle source (176Hf/177Hf: 0.282539-0.283091; ƐHf(t): + 3.2 to + 15.0). ƐHf(t) values from near 0 to - 2.8 in the tonalites indicate a contribution from the continental crust. Trace elements and REE patterns in whole rock and zircons point to a primitive mantle source for differentiated mafic, plagiogranite dykes and tonalitic plutons. Geochronological and geochemical data address the generation of new oceanic crust above the subduction zone, probably in a backarc setting. In this tectonic scenario, the JC ophiolite originated due to the convergence of the paleo-Pacific plate below the already integrated Oaxacan and Acatlán complexes in western Pangea. The dextral displacement places the deformation in a transtensional regime during the late Paleozoic age.

  9. A new paleozoic Symmoriiformes (Chondrichthyes from the late Carboniferous of Kansas (USA and cladistic analysis of early chondrichthyans.

    Directory of Open Access Journals (Sweden)

    Alan Pradel

    Full Text Available BACKGROUND: The relationships of cartilaginous fishes are discussed in the light of well preserved three-dimensional Paleozoic specimens. There is no consensus to date on the interrelationship of Paleozoic chondrichthyans, although three main phylogenetic hypotheses exist in the current literature: 1. the Paleozoic shark-like chondrichthyans, such as the Symmoriiformes, are grouped along with the modern sharks (neoselachians into a clade which is sister group of holocephalans; 2. the Symmoriiformes are related to holocephalans, whereas the other Paleozoic shark-like chondrichthyans are related to neoselachians; 3. many Paleozoic shark-like chondrichthyans, such as the Symmoriiformes, are stem chondrichthyans, whereas stem and crown holocephalans are sister group to the stem and crown neoselachians in a crown-chondrichthyan clade. This third hypothesis was proposed recently, based mainly on dental characters. METHODOLOGY/PRINCIPAL FINDINGS: On the basis of two well preserved chondrichthyan neurocrania from the Late Carboniferous of Kansas, USA, we describe here a new species of Symmoriiformes, Kawichthys moodiei gen. et sp. nov., which was investigated by means of computerized X-ray synchrotron microtomography. We present a new phylogenetic analysis based on neurocranial characters, which supports the third hypothesis and corroborates the hypothesis that crown-group chondrichthyans (Holocephali+Neoselachii form a tightly-knit group within the chondrichthyan total group, by providing additional, non dental characters. CONCLUSIONS/SIGNIFICANCE: Our results highlight the importance of new well preserved Paleozoic fossils and new techniques of observation, and suggest that a new look at the synapomorphies of the crown-group chondrichthyans would be worthwhile in terms of understanding the adaptive significance of phylogenetically important characters.

  10. Geochemical evidence for Paleozoic crustal growth and tectonic conversion in the Northern Beishan Orogenic Belt, southern Central Asian Orogenic Belt

    Science.gov (United States)

    Yuan, Yu; Zong, Keqing; He, Zhenyu; Klemd, Reiner; Jiang, Hongying; Zhang, Wen; Liu, Yongsheng; Hu, Zhaochu; Zhang, Zeming

    2018-03-01

    The Beishan Orogenic Belt is located in the central southernmost part of the Central Asian Orogenic Belt (CAOB), which plays a key role in understanding the formation and evolution of the CAOB. Granitoids are the documents of crustal and tectonic evolution in orogenic belts. However, little is known regarding the petrogenesis and geodynamic setting of the widely distributed Paleozoic granitoids in the Northern Beishan Orogenic Belt (NBOB). The present study reveals significant differences concerning the petrogenesis and tectonic setting of early and late Paleozoic granitoids from the NBOB. The early Paleozoic granitoids from the 446-430 Ma Hongliuxia granite complex of the Mazongshan unit and the 466-428 Ma Shibanjing complex of the Hanshan unit show classic I-type granite affinities as revealed by the relative enrichment of LILEs and LREEs, pronounced depletions of Nb, Ta and Ti and the abundant presence of hornblende. Furthermore, they are characterized by strongly variable zircon εHf(t) values between - 16.7 and + 12.8 and evolved plagioclase Sr isotopic compositions of 0.7145-0.7253, indicating the involvement of both juvenile and ancient continental crust in the magma source. Thus, we propose that the early Paleozoic granitoids in the NBOB were generated in a subduction-related continental arc setting. In contrast, the late Paleozoic 330-281 Ma granitoids from the Shuangjingzi complex of the Hanshan unit exhibit positive zircon εHf(t) values between + 5.8 and + 13.2 and relatively depleted plagioclase Sr isotopic compositions of 0.7037-0.7072, indicating that they were mainly formed by remelting of juvenile crust. Thus, an intra-plate extensional setting is proposed to have occurred during formation of the late Paleozoic granitoids. Therefore, between the early and late Paleozoic, the magma sources of the NBOB granitoids converted from the reworking of both juvenile and ancient crusts during a subduction-induced compressional setting to the remelting of

  11. Thermal evidence of Caledonide foreland, molasse sedimentation in Fennoscandia

    Energy Technology Data Exchange (ETDEWEB)

    Tullborg, E L; Larsson, S Aa; Bjoerklund, L; Stigh, J [Goeteborg Univ. (Sweden). Dept. of Geology, Earth Sciences Centre; Samuelsson, L [Geological Survey of Sweden, Goeteborg (Sweden). Earth Sciences Centre

    1995-11-01

    The Phanerozoic rocks present on the Fennoscandian Shield are dominantly of Cambrian to Silurian age. They represent a relatively thin sedimentary cover. The question is: why do we not see any remnants of younger sedimentary rocks? Did they ever exist, have they been eroded, transported and redeposited elsewhere? {delta}{sup 18}O and {delta}{sup 13}C analyses of Ordovician limestones from different places in Sweden and from the Oslo region in Norway show modification of their original marine signature according to the {delta}{sup 18}O concentrations, while the {delta}{sup 13}C concentrations generally are typical for marine limestones. In some cases the modifications can be explained by intrusions of dykes or by metamorphic events, but in most areas the redistribution of the oxygen isotopes indicates burial diagenesis. From a number of published investigations, raised temperatures at the present surface during the late Palaeozoic, are indicated by different temperature indicators. We suggest that these increased temperatures were due to a sedimentary cover of mainly Devonian sediments deposited on top of the Cambrian-Silurian sequence. This palaeo-cover caused raised temperatures at the present rock surface. In the Proterozoic basement, annealing of fission tracks in apatite and mobility of radiogenic lead also give evidence of increased temperatures. A model where the thickness of the Upper Paleozoic cover of the Caledonian foreland is 2-4 kilometers thick is suggested. This cover mainly consisted of late Silurian-Devonian erosion products from the Caledonides, the latter formed during a Silurian continent-continent collision. A major Permian to Triassic uplift and erosion reduced the cover significantly. 94 refs, 9 figs.

  12. The Paleozoic ichthyofauna of the Amazonas and Parnaíba basins, Brazil

    Science.gov (United States)

    Figueroa, Rodrigo Tinoco; Machado, Deusana Maria da Costa

    2018-03-01

    The Brazilian Paleozoic ichthyofauna from the Parnaíba and Amazonas basins regard a sparsely known diversity, including chondrichthyans and acanthodians, besides some osteichthyan remains. This work proposes a revision of the fossil material from these two sedimentary basins and synthesizes the morphological aspect of such material trying to understand the influences of those fossils to the paleontology of the region, comparing the Brazilian fossils with other gondwanan faunas. The Brazilian Paleozoic fish fauna shows great resemblance to those of Bolivia, especially during the Devonian. Many of the Acanthodian spines from the Manacapuru Formation (Amazonas Basin), and the Pimenteira Formation (Parnaíba Basin), are comparable to the taxa found in Bolivia. The lack of more Placoderm remains in the Brazilian outcrops is similar to the low diversity of this group in Bolivia, when compared to other South American and Euramerican localities. The most diverse Brazilian ichthyofauna is encountered in the Permian Pedra de Fogo Formation where numerous chondrichthyans and 'paleopterygians' remains are found, together with dipnoans and actinistians. Despite the apparent lack of more representative Paleozoic ichthyofaunas in Brazil, the available material that ranges from Lower Devonian to early Permian from Brazil bears important taxa that could address valuable taxonomic and biogeographic informations.

  13. Deposition of a saline giant in the Mississippian Windsor Group, Nova Scotia, and the nascent Late Paleozoic Ice Age

    Science.gov (United States)

    MacNeil, Laura A.; Pufahl, Peir K.; James, Noel P.

    2018-01-01

    Saline giants are vast marine evaporite deposits that currently have no modern analogues and remain one of the most enigmatic of chemical sedimentary rocks. The Mississippian Windsor Group (ca. 345 Ma), Maritimes Basin, Atlantic Canada is a saline giant that consists of two evaporite-rich sedimentary sequences that are subdivided into five subzones. Sequence 1 is composed almost entirely of thick halite belonging to Subzone A (Osagean). Sequence 2 is in unconformable contact and comprised of stacked carbonate-evaporite peritidal cycles of Subzones B through E (Meramecian). Subzone B, the focus of research herein, documents the transition from wholly evaporitic to open marine conditions and thus, preserves an exceptional window into the processes forming saline giants. Lithofacies stacking patterns in Subzone B reveal that higher-order fluctuations in relative sea level produced nine stacked parasequences interpreted to reflect high frequency glacioeustatic oscillations during the onset of the Late Paleozoic Ice Age. Each parasequence reflects progradation of intertidal and sabkha sediments over subtidal carbonate and evaporite deposits. Dissimilarities in cycle composition between sub-basins imply the development of contrasting brine chemistries from differing recharge rates with the open ocean. What the Windsor Group shows is that evaporite type is ostensibly linked to the amplitude and frequency of sea level rise and fall during deposition. True saline giants, like the basinwide evaporites of Sequence 1, apparently require low amplitude, long frequency changes in sea level to promote the development of stable brine pools that are only periodically recharged with seawater. By contrast, the high amplitude, short frequency glacioeustatic variability in sea level that controlled the accumulation of peritidal evaporites in Subzone B produce smaller, subeconomic deposits with more complex facies relationships.

  14. Sediment volume in the north polar sand seas of Mars

    International Nuclear Information System (INIS)

    Lancaster, N.; Greeley, R.

    1990-01-01

    Data from studies of the cross-sectional area of terrestrial transverse dunes have been combined with maps of dune morphometry derived from Viking orbiter images to generate new estimates of sediment thickness and dune sediment volume in the north polar sand seas of Mars. A relationship between dune spacing and equivalent sediment thickness (EST) was developed from field data on Namibian and North American dunes and was applied to data on dune spacing and dune cover measured on Viking orbiter images to generate maps of dune sediment thickness for Martian north polar sand seas. There are four major sand seas in the north polar region of Mars, covering an area of 6.8 x 10 5 km 2 . Equivalent sediment thickness ranges between 0.5 and 6.1 m with a mean of 1.8 m. The sand seas contain a total of 1158 km 3 of dune sediment, which may have been derived by erosion of polar layered deposits and concentrated in its present location by winds that change direction seasonally

  15. Isotopic tracers of gold deposition in paleozoic limestones, southern Nevada

    International Nuclear Information System (INIS)

    Peterman, Z.E.; Widmann, B.L.; Marshall, B.D.; Aleinikoff, J.N.; Futa, K.; Mahan, S.A.

    1994-01-01

    Strontium isotopic analyses of barren and mineralized Paleozoic carbonate rocks show that hydrothermal fluids added radiogenic strontium ( 87 Sr) to the mineralized zones. At Bare Mountain, samples collected from mineralized areas have δ 87 Sr t values (per mil deviation from primary marine values) ranging from +3.0 to +23.0 (mean of this log-normal distribution is +7.0), whereas unmineralized carbonate rocks have δ 87 Sr t values of -0.6 to +2.9 (mean of +1.07±1.03). In other ranges (Striped Hills, Spring Mountains, and ranges in the vicinity of Indian Springs Valley), δ 87 Sr t values of the unmineralized carbonate rocks are even lower and virtually indistinguishable from primary marine values. This correlation of elevated δ 87 Sr t values with mineralized zones provides a useful technique for assessing the mineral potential of the Paleozoic basement beneath Yucca Mountain, and may find broader use in mineral exploration in the Basin and Range province as a whole

  16. Tectonic model for the Late Paleozoic of southeastern New England

    Energy Technology Data Exchange (ETDEWEB)

    Wintsch, R.P.; Sutter, J.F.

    1986-07-01

    Hornblende and biotite /sup 40/Ar//sup 39/Ar age spectra from rocks in south-central Connecticut help define a Permian-Triassic cooling curve for the area. Together with petrologic and structural information, a time-temperature-pressure-strain path is established. Similar data for the Narragansett basin in Rhode Island and Massachusetts allow correlation of the late Paleozoic histories of the two areas. Together, these data suggest that in the late Paleozoic, south-central New England was part of a fold-thrust belt, and the Narragansett basin was a retroarc foreland basin. NW-SE compression during the final assembly of Pangaea resulted in SE directed thrusting, causing the development of clastic wedges in adjacent Rhode Island and Massachusetts in the Late Carboniferous-Early Permian. A clockwise rotation of this deformation from NW to NNE led to northward underthrusting and concomitant uplift of both eastern Connecticut and Rhode Island in the Permian and Triassic.

  17. Sedimentation studies at MUDA catchment area, Kedah, Malaysia

    International Nuclear Information System (INIS)

    Kamarudin Samuding; Juhari Yusuf; Wan Abdul Aziz; Juhari Latiff

    2000-01-01

    A study on the sediment size distribution and determination of sediment density profile in the selected area of Muda dam catchment area, Kedah is presented. The objective of the study was to establish a base line data of the input sedimentation with regards to the effects of development within the catchment in the future. Three main sampling locations were identified namely at Sungai Teliang, Sungai Muda and Muda reservoir. Measurement of sediment thickness was performed by using nuclear gauges i.e. direct transmission and backscattering methods. Results showed that the grain size distribution of sediment ranges from gravel to clay sizes. In the reservoir and downstream of the river, most of the samples studied consisting of fine sediment i.e silt and clay sizes (<63,um). However, sediment distribution in the upstream section of Sungai Teliang mainly consist of fine to coarse sand. Sediment density profiles in the reservoir showed little changes, whereas bed sediment profiles in the river cross-sectional areas exhibit some changes. The results also showed that thickness of bedload sediment were different from one location to another, in which the thickness may achieve up to 0.75 metre in some areas. Based on the sediment distribution profile analysis, the study site could be divided into two parts comprising of dynamic area (region) covering selected locations along the river and deposited sediment in the reservoir. Basic information derived from this study may provide as one of the important inputs for the MADA reservoir management authority in monitoring, supervising y and identifying rate and source of sediment in the catchment area

  18. The White Nile as a source for Nile sediments: Assessment using U-Pb geochronology of detrital rutile and monazite

    Science.gov (United States)

    Be'eri-Shlevin, Yaron; Avigad, Dov; Gerdes, Axel

    2018-04-01

    Basement terranes exposed at the headwaters of the White Nile include Archean-Paleoproterozoic rocks of the Congo Craton, whose northern sectors were severely reworked during Neoproterozoic orogeny. New U-Pb analyses of detrital rutile and monazite from early Quaternary to Recent coastal quartz sands of Israel, at the northeast extension of the Nile sedimentary system, yield mostly late Neoproterozoic ages, with a dominant peak at ca. 600 Ma. While derivation from the reworked sectors of the Craton cannot be negated, the absence of pre-Neoproterozoic rutile and monazite indicates that the detrital contribution from the Congo cratonic nuclei into the main Nile was insignificant. The near absence of White Nile basement-derived heavy minerals from the Nile sands arriving at the Eastern Mediterranean may be explained by a number of factors such as relatively minor erosion of the Cratonic basement nuclei during the Quaternary, late connection of the White Nile to the main Nile system with a possibility that northern segments connected prior to more southerly ones, and a long-term effective sediment blockage mechanism at the mouth of White Nile. Likewise, our previous study demonstrated that Nile sands display a detrital zircon U-Pb-Hf pattern consistent with significant recycling of NE African Paleozoic sediments. It is thus plausible that any detrital contribution from White Nile basement rocks was thoroughly diluted by eroded Paleozoic sediments, or their recycled products, which were likely the greatest sand reservoir in the region. This study adds to previous studies showing the advantage of a multi mineral U-Pb geochronology strategy in constraining sediment provenance patterns.

  19. Status report: numerical modeling of ground-water flow in the Paleozoic formations, western Paradox Basin, Utah

    International Nuclear Information System (INIS)

    Dunbar, D.B.; Thackston, J.W.

    1985-10-01

    A three-dimensional finite-difference numerical model was applied to simulate the ground-water flow pattern in Paleozoic strata within the western Paradox Basin region. The primary purpose of the modeling was to test the present conceptual hydrogeologic model and evaluate data deficiencies. All available data on ground-water hydrology, although sparse in this area, were utilized as input to the model. Permeability and potentiometric levels were estimated from petroleum company drill-stem tests and water-supply wells; formation thicknesses were obtained from geologic correlation of borehole geophysical logs. Hydrogeologic judgment weighed heavily in the assignment of hydrologic values to geologic features for this preliminary modeling study. Calibration of the model was accomplished through trial-and-error matching of simulated potentiometric contours with available head data. Hypothetical flow patterns, flux rates, recharge amounts, and surface discharge amounts were produced by the model. 34 refs., 17 figs., 3 tabs

  20. The paleozoic of Amazonas basin south edge: Tapajos river, Para state; O paleozoico da borda sul da bacia do Amazonas: rio Tapajos, estado do Para

    Energy Technology Data Exchange (ETDEWEB)

    Matsuda, Nilo Siguehiko [Petrobras E e P, Rio de Janeiro, RJ (Brazil). Exploracao. Estratigrafia e Sedimentologia Geologia Aplicada a Exploracao], E-mail: nilo@petrobras.com.br; Winter, Wilson Rubem [Petrobras, Campoas dos Goytacases, RJ (Brazil). Exploracao. Sedimentologia e Estratigrafia], E-mail: winter@petrobras.com.br; Wanderley Filho, Joaquim Ribeiro; Cacela, Alessandra Suzely Moda [Petrobras, Manaus, AM (Brazil). Exploracao. Unidade de Operacoes de Exploracao e Producao da Amazonia], Emails: jwand@petrobras.com.br, alessandra.suzely@petrobras.com.br

    2009-11-15

    The intracratonic Amazonas Basin covers an area close to 500.000km{sup 2} shared between the Amazonas and Para states. The phanerozoic stratigraphic framework is up to 6.000m thick and may be subdivided into two, first order depositional sequences: the Paleozoic sequence, intruded by diabase dikes and sills and the Mesozoic-Cenozoic sequence. Analyzing the stratigraphic framework, the great tectonic influence on the basin development can be appreciated. The mainly NW-SE structural directions of the basement, which mark the boundaries of the geochronological provinces of the Amazonas, are clearly identified along the Tapajos River. The Paleozoic sequence outcrops on the southern border of the Amazonas Basin embraces potential source rocks, reservoirs and seal rocks. They can be subdivided in three, second order sequences, limited by regional unconformities, as: the Ordovician/Devonian, which corresponds to the Pitinga lithostratigraphic formation; the Devonian-Tournaisian, which corresponds to the Maecuru, Erere, Barreirinha and Curiri formations and, the Pensylvanian-Permian that are represented by the Monte Alegre and Itaituba formations. This field trip guide presents these classic lithostratigraphic outcrop units, together with a brief sedimentological description and an analysis of their positioning related to sequence stratigraphical concepts. (author)

  1. Plate tectonics in the late Paleozoic

    Directory of Open Access Journals (Sweden)

    Mathew Domeier

    2014-05-01

    Full Text Available As the chronicle of plate motions through time, paleogeography is fundamental to our understanding of plate tectonics and its role in shaping the geology of the present-day. To properly appreciate the history of tectonics—and its influence on the deep Earth and climate—it is imperative to seek an accurate and global model of paleogeography. However, owing to the incessant loss of oceanic lithosphere through subduction, the paleogeographic reconstruction of ‘full-plates’ (including oceanic lithosphere becomes increasingly challenging with age. Prior to 150 Ma ∼60% of the lithosphere is missing and reconstructions are developed without explicit regard for oceanic lithosphere or plate tectonic principles; in effect, reflecting the earlier mobilistic paradigm of continental drift. Although these ‘continental’ reconstructions have been immensely useful, the next-generation of mantle models requires global plate kinematic descriptions with full-plate reconstructions. Moreover, in disregarding (or only loosely applying plate tectonic rules, continental reconstructions fail to take advantage of a wealth of additional information in the form of practical constraints. Following a series of new developments, both in geodynamic theory and analytical tools, it is now feasible to construct full-plate models that lend themselves to testing by the wider Earth-science community. Such a model is presented here for the late Paleozoic (410–250 Ma together with a review of the underlying data. Although we expect this model to be particularly useful for numerical mantle modeling, we hope that it will also serve as a general framework for understanding late Paleozoic tectonics, one on which future improvements can be built and further tested.

  2. Global Ocean Sedimentation Patterns: Plate Tectonic History Versus Climate Change

    Science.gov (United States)

    Goswami, A.; Reynolds, E.; Olson, P.; Hinnov, L. A.; Gnanadesikan, A.

    2014-12-01

    Global sediment data (Whittaker et al., 2013) and carbonate content data (Archer, 1996) allows examination of ocean sedimentation evolution with respect to age of the underlying ocean crust (Müller et al., 2008). From these data, we construct time series of ocean sediment thickness and carbonate deposition rate for the Atlantic, Pacific, and Indian ocean basins for the past 120 Ma. These time series are unique to each basin and reflect an integrated response to plate tectonics and climate change. The goal is to parameterize ocean sedimentation tied to crustal age for paleoclimate studies. For each basin, total sediment thickness and carbonate deposition rate from 0.1 x 0.1 degree cells are binned according to basement crustal age; area-corrected moments (mean, variance, etc.) are calculated for each bin. Segmented linear fits identify trends in present-day carbonate deposition rates and changes in ocean sedimentation from 0 to 120 Ma. In the North and South Atlantic and Indian oceans, mean sediment thickness versus crustal age is well represented by three linear segments, with the slope of each segment increasing with increasing crustal age. However, the transition age between linear segments varies among the three basins. In contrast, mean sediment thickness in the North and South Pacific oceans are numerically smaller and well represented by two linear segments with slopes that decrease with increasing crustal age. These opposing trends are more consistent with the plate tectonic history of each basin being the controlling factor in sedimentation rates, rather than climate change. Unlike total sediment thickness, carbonate deposition rates decrease smoothly with crustal age in all basins, with the primary controls being ocean chemistry and water column depth.References: Archer, D., 1996, Global Biogeochem. Cycles 10, 159-174.Müller, R.D., et al., 2008, Science, 319, 1357-1362.Whittaker, J., et al., 2013, Geochem., Geophys., Geosyst. DOI: 10.1002/ggge.20181

  3. Selection of areas for testing in the Eleana formation: Paleozoic geology of western Yucca Flat

    Energy Technology Data Exchange (ETDEWEB)

    Sweeney, J J

    1984-07-01

    The Paleozoic geology of NTS is reviewed to select an area for underground nuclear testing in shale. Constraints on possible areas, dictated by test program requirements and economics, are areas with topographic slope less than 5/sup 0/, depths to working point less than 3000 ft., and working points above the water table. The rock formation selected is Unit J (argillite) of the Mississippian age Eleana Formation. Within NTS, Western Yucca Flat is selected as the best area to meet the requirements. Details of the Paleozoic structure of western Yucca Flat are presented. The interpretation is based on published maps, cross-sections, and reports as well as borehole, refraction seismic, and gravity data. In terms of subsurface structure and areas where Eleana Formation Unit J occurs at depths between 500 ft to 3000 ft, four possible testing areas are identified. The areas are designated here as A, B, C and the Gravity High. Available data on the water table (static water level) is reviewed for western Yucca Flat area. Depth to the water table increases from 500 to 600 ft in Area A to 1500 ft or more in the Gravity High area. Review of the water table data rules out area A and B for testing in argillite above the water table. Area C is relatively unexplored and water conditions are unknown there. Thus, the Gravity High is selected as the most promising area for selecting testing sites. There is a dolomite thrust sheet of unknown thickness overlying the argillite in the Gravity High area. An exploration program is proposed to better characterize this structure. Finally, recommendations are made for procedures to follow for eventual site characterization of a testing site in argillite. 22 references, 12 figures, 1 table.

  4. Uranium Hydrogeochemical and Stream Sediment Reconnaissance in southwestern Montana

    Energy Technology Data Exchange (ETDEWEB)

    Broxton, D.E.

    1978-02-01

    The Los Alamos Scientific Laboratory conducted a Hydrogeochemical and Stream Sediment Reconnaissance in southwestern Montana from early August to mid-October of 1976. A total of 1240 water and 1933 sediment samples were collected from 1994 locations at a nominal density of one location per 10 km/sup 2/. The water samples were collected from streams, wells, and springs; sediment samples were taken at streams and springs. All samples were analyzed at Los Alamos for total uranium by fluorometry or delayed-neutron counting. The uranium content of water samples ranges from below the detection limit (less than 0.3 ppB) to 45.30 ppB and has a mean value of 1.40 ppB. The uranium content of the sediment samples ranges between 0.20 and 206.80 ppM and averages 6.12 ppM. The chosen uranium anomaly threshold value was 7 ppB for surface waters (streams), 9 ppB for groundwaters (wells and springs), and 25 ppM for all sediment samples. The study area consists of the following lithologic groups: Precambrian basement complex, Precambrian Belt metasediments, Paleozoic and Mesozoic shelf sediments, Cretaceous and early Tertiary volcanic and plutonic rocks, Laramide orogenic clastic sediments, and middle to late Tertiary volcanic rocks and intermontane basin sediments. Most of the anomalous water and sediment samples with well-developed dispersion trains occur in areas underlain by or adjacent to silicic plutonic rocks of the Idaho and Boulder batholiths. These anomalies may indicate the presence of uraniferous veins and pegmatites similar to those already known to exist in the area. Fewer anomalous water samples occur in areas underlain by Precambrian basement complex and Tertiary basin fill.

  5. Uranium Hydrogeochemical and Stream Sediment Reconnaissance in southwestern Montana

    International Nuclear Information System (INIS)

    Broxton, D.E.

    1978-02-01

    The Los Alamos Scientific Laboratory conducted a Hydrogeochemical and Stream Sediment Reconnaissance in southwestern Montana from early August to mid-October of 1976. A total of 1240 water and 1933 sediment samples were collected from 1994 locations at a nominal density of one location per 10 km 2 . The water samples were collected from streams, wells, and springs; sediment samples were taken at streams and springs. All samples were analyzed at Los Alamos for total uranium by fluorometry or delayed-neutron counting. The uranium content of water samples ranges from below the detection limit (less than 0.3 ppB) to 45.30 ppB and has a mean value of 1.40 ppB. The uranium content of the sediment samples ranges between 0.20 and 206.80 ppM and averages 6.12 ppM. The chosen uranium anomaly threshold value was 7 ppB for surface waters (streams), 9 ppB for groundwaters (wells and springs), and 25 ppM for all sediment samples. The study area consists of the following lithologic groups: Precambrian basement complex, Precambrian Belt metasediments, Paleozoic and Mesozoic shelf sediments, Cretaceous and early Tertiary volcanic and plutonic rocks, Laramide orogenic clastic sediments, and middle to late Tertiary volcanic rocks and intermontane basin sediments. Most of the anomalous water and sediment samples with well-developed dispersion trains occur in areas underlain by or adjacent to silicic plutonic rocks of the Idaho and Boulder batholiths. These anomalies may indicate the presence of uraniferous veins and pegmatites similar to those already known to exist in the area. Fewer anomalous water samples occur in areas underlain by Precambrian basement complex and Tertiary basin fill

  6. Formation and preservation of greigite (Fe3S4) in a thick sediment layer from the central South Yellow Sea

    Science.gov (United States)

    Liu, Jianxing; Mei, Xi; Shi, Xuefa; Liu, Qingsong; Liu, Yanguang; Ge, Shulan

    2018-04-01

    Sediments from continental shelves are sensitive to changes in both oceanic and terrestrial conditions, and, therefore, magnetic minerals in such sediments are affected strongly by depositional and diagenetic processes. Here, we investigated systematically an N-S transect of three sediment cores from the central South Yellow Sea (SYS) muddy area. Magnetic data indicate the presence of a horizontally distributed thick greigite-bearing layer. From an age model based on published magnetostratigraphy, accelerator mass spectrometry 14C dating ages, sedimentary characteristics and foraminiferal analysis, this layer was deposited within marine isotope stages (MIS) 17-13, following an enhanced sulphidic period over MIS 21-19 when the YS Warm Current and the associated YS Cold Water Mass were strong and where underlying sediments have higher total organic carbon, total sulphur and trace element molybdenum contents. Trace element cadmium enrichment in the greigite-bearing layers is documented for the first time, which indicates that weakly sulphidic (i.e. with trace levels of free H2S) conditions existed before greigite formed in a sulphidic environment during early diagenesis. It also indicates that subsequent conditions free of oxygen and H2S after greigite formation are more favourable for its preservation. We propose that organic matter supply was controlled over an extended period by moderate primary productivity. The combined effects of palaeoclimate and local tectonic subsidence were crucial for the formation and preservation of the identified greigite. In brief, our study improves understanding of the formation and preservation mechanisms of greigite in continental shelf sediments and reveals mid-Pleistocene palaeoenvironmental changes in the SYS.

  7. Pore characteristics of shale gas reservoirs from the Lower Paleozoic in the southern Sichuan Basin, China

    Directory of Open Access Journals (Sweden)

    Xianqing Li

    2016-06-01

    Full Text Available Data was acquired from both the drillings and core samples of the Lower Paleozoic Qiongzhusi and Longmaxi Formations' marine shale gas reservoirs in the southern Sichuan Basin by means of numerous specific experimental methods such as organic geochemistry, organic petrology, and pore analyses. Findings helped determine the characteristics of organic matter, total porosity, microscopic pore, and pore structure. The results show that the Lower Paleozoic marine shale in the south of the Sichuan Basin are characterized by high total organic carbon content (most TOC>2.0%, high thermal maturity level (RO = 2.3%–3.8%, and low total porosity (1.16%–6.87%. The total organic carbon content and thermal maturity level of the Qiongzhusi Formation shale are higher than those of the Longmaxi Formation shale, while the total porosity of the Qiongzhusi Formation shale is lower than that of the Longmaxi Formation shale. There exists intergranular pore, dissolved pore, crystal particle pore, particle edge pore, and organic matter pore in the Lower Paleozoic Qiongzhusi Formation and Longmaxi Formation shale. There are more micro-nano pores developed in the Longmaxi Formation shales than those in the Qiongzhusi Formation shales. Intergranular pores, dissolved pores, as well as organic matter pores, are the most abundant, these are primary storage spaces for shale gas. The microscopic pores in the Lower Paleozoic shales are mainly composed of micropores, mesopores, and a small amount of macropores. The micropore and mesopore in the Qiongzhusi Formation shale account for 83.92% of the total pore volume. The micropore and mesopore in the Longmaxi Formation shale accounts for 78.17% of the total pore volume. Thus, the micropores and mesopores are the chief components of microscopic pores in the Lower Paleozoic shale gas reservoirs in the southern Sichuan Basin.

  8. New age constraints on the palaeoenvironmental evolution of the late Paleozoic back-arc basin along the western Gondwana margin of southern Peru

    Science.gov (United States)

    Boekhout, F.; Reitsma, M. J.; Spikings, R.; Rodriguez, R.; Ulianov, A.; Gerdes, A.; Schaltegger, U.

    2018-03-01

    The tectonic evolution of the western Gondwana margin during Pangaea amalgation is recorded in variations in the Permo-Carboniferous back-arc basin sedimentation of Peru. This study provides the first radiometric age constraints on the volcanic and sedimentary sequences of south-central eastern Peru up to the western-most tip of Bolivia, and now permits the correlation of lateral facies variations to the late Paleozoic pre-Andean orogenic cycle. The two phases of Gondwanide magmatism and metamorphism at c. 315 Ma and c. 260 Ma are reflected in two major changes in this sedimentary environment. Our detrital U-Pb zircon ages demonstrate that the timing of Ambo Formation deposition corroborates the Late Mississipian age estimates. The transition from the Ambo to the Tarma Formation around the Middle Pennsylvanian Early Gondwanide Orogeny (c. 315 Ma) represents a relative deepening of the basin. Throughout the shallow marine deposits of the Tarma Formation evidence for contemporaneous volcanism becomes gradually more pronounced and culminates around 312 - 309 Ma. Continuous basin subsidence resulted in a buildup of platform carbonates of the Copacabana Formation. Our data highlights the presence of a previously unrecognized phase of deposition of mainly fluvial sandstones and localized volcanism (281-270 Ma), which we named ´Oqoruro Formation'. This sedimentary succession was previously miss-assigned to the so-called Mitu Group, which has recently been dated to start deposition in the Middle Triassic (∼245-240 Ma). The emersion of this marine basin coincides with the onset of a major plutonic pulse related to the Late Gondwanide Orogeny (c. 260). Exhumation lead to the consequent retreat of the epeiric sea to the present-day sub-Andean region, and the coeval accumulation of the fluvial Oqoruro Formation in south eastern Peru. These late Paleozoic palaeoenvironmental changes in the back-arc basins along the western Gondwana margin of southern reflect changes in

  9. Estimating crustal thickness using SsPmp in regions covered by low-velocity sediments: Imaging the Moho beneath the Southeastern Suture of the Appalachian Margin Experiment (SESAME) array, SE Atlantic Coastal Plain

    Science.gov (United States)

    Parker, E. Horry, Jr.; Hawman, Robert B.; Fischer, Karen M.; Wagner, Lara S.

    2016-09-01

    Deconvolved waveforms for two earthquakes (Mw: 6.0 and 5.8) show clear postcritical SsPmp arrivals for broadband stations deployed across the coastal plain of Georgia, allowing mapping of crustal thickness in spite of strong reverberations generated by low-velocity sediments. Precritical SsPmp arrivals are also identified. For a basement in which velocity increases linearly with depth, a bootstrapped grid search suggests an average basement velocity of 6.5 ± 0.1 km/s and basement thickness of 29.8 ± 2.0 km. Corresponding normal-incidence Moho two-way times (including sediments) are 10.6 ± 0.6 s, consistent with times for events interpreted as Moho reflections on coincident active-source reflection profiles. Modeling of an underplated mafic layer (Vp = 7.2-7.4 km/s) using travel time constraints from SsPmp data and vertical-incidence Moho reflection times yields a total basement thickness of 30-35 km and average basement velocity of 6.35-6.65 km/s for an underplate thickness of 0-15 km.

  10. Collision of the Tacheng block with the Mayile-Barleik-Tangbale accretionary complex in Western Junggar, NW China: Implication for Early-Middle Paleozoic architecture of the western Altaids

    Science.gov (United States)

    Zhang, Ji'en; Xiao, Wenjiao; Luo, Jun; Chen, Yichao; Windley, Brian F.; Song, Dongfang; Han, Chunming; Safonova, Inna

    2018-06-01

    Western Junggar in NW China, located to the southeast of the Boshchekul-Chingiz (BC) Range and to the north of the Chu-Balkhash-Yili microcontinent (CBY), played a key role in the architectural development of the western Altaids. However, the mutual tectonic relationships have been poorly constrained. In this paper, we present detailed mapping, field structural geology, and geochemical data from the Barleik-Mayile-Tangbale Complex (BMTC) in Western Junggar. The Complex is divisible into Zones I, II and III, which are mainly composed of Cambrian-Silurian rocks. Zone I contains pillow lava, siliceous shale, chert, coral-bearing limestone, sandstone and purple mudstone. Zone II consists of basaltic lava, siliceous shale, chert, sandstone and mudstone. Zone III is characterized by basalt, chert, sandstone and mudstone. These rocks represent imbricated ocean plate stratigraphy, which have been either tectonically juxtaposed by thrusting or form a mélange with a block-in-matrix structure. All these relationships suggest that the BMTC is an Early-Middle Paleozoic accretionary complex in the eastern extension of the BC Range. These Early Paleozoic oceanic rocks were thrust onto Silurian sediments forming imbricate thrust stacks that are unconformably overlain by Devonian limestone, conglomerate and sandstone containing fossils of brachiopoda, crinoidea, bryozoa, and plant stems and leaves. The tectonic vergence of overturned folds in cherts, drag-related curved cleavages and σ-type structures on the main thrust surface suggests top-to-the-NW transport. Moreover, the positive εNd(t) values of volcanic rocks from the Tacan-1 drill-core, and the positive εHf(t) values and post-Cambrian ages of detrital zircons from Silurian and Devonian strata to the south of the Tacheng block indicate that its basement is a depleted and juvenile lithosphere. And there was a radial outward transition from coral-bearing shallow marine (shelf) to deep ocean (pelagic) environments, and from

  11. The features of the isotope composition of carbon in the Paleozoic and Mesozoic oils of Western Siberia

    Energy Technology Data Exchange (ETDEWEB)

    Golyshev, S.I.; Lebedena, L.V.

    1984-01-01

    The isotope composition of the carbon in the oils from the Mesozoic and Paleozoic deposits is measured. The variations in the isotope composition of carbon for the Paleozoic oils is between 27.5 and 30.8 percent, while for the oils from the lower Jurassic and Triassic levels it is between 27.7 and 31.2 percent and for the upper Jurassic oils it is between 30.1 and 34.5 percent. The dependence of the isotope composition of the carbon in the oils on the type of original organic matter and its metamorphosis conditions during lithogenesis is analyzed. A softening in the isotope composition of the carbon in the oils from the oceanic deposits relative to continental deposits is found, together with a genetic individualism of the oils from the Paleozoic deposits and their difference from the oils in the Mesozoic deposits.

  12. Assessing the impact of Hurricanes Irene and Sandy on the morphology and modern sediment thickness on the inner continental shelf offshore of Fire Island, New York

    Science.gov (United States)

    Schwab, William C.; Baldwin, Wayne E.; Denny, Jane F.

    2016-01-15

    This report documents the changes in seabed morphology and modern sediment thickness detected on the inner continental shelf offshore of Fire Island, New York, before and after Hurricanes Irene and Sandy made landfall. Comparison of acoustic backscatter imagery, seismic-reflection profiles, and bathymetry collected in 2011 and in 2014 show that sedimentary structures and depositional patterns moved alongshore to the southwest in water depths up to 30 meters during the 3-year period. The measured lateral offset distances range between about 1 and 450 meters with a mean of 20 meters. The mean distances computed indicate that change tended to decrease with increasing water depth. Comparison of isopach maps of modern sediment thickness show that a series of shoreface-attached sand ridges, which are the dominant sedimentary structures offshore of Fire Island, migrated toward the southwest because of erosion of the ridge crests and northeast-facing flanks as well as deposition on the southwest-facing flanks and in troughs between individual ridges. Statistics computed suggest that the modern sediment volume across the about 81 square kilometers of common sea floor mapped in both surveys decreased by 2.8 million cubic meters, which is a mean change of –0.03 meters, which is smaller than the resolution limit of the mapping systems used.

  13. Late paleozoic fusulinoidean gigantism driven by atmospheric hyperoxia.

    Science.gov (United States)

    Payne, Jonathan L; Groves, John R; Jost, Adam B; Nguyen, Thienan; Moffitt, Sarah E; Hill, Tessa M; Skotheim, Jan M

    2012-09-01

    Atmospheric hyperoxia, with pO(2) in excess of 30%, has long been hypothesized to account for late Paleozoic (360-250 million years ago) gigantism in numerous higher taxa. However, this hypothesis has not been evaluated statistically because comprehensive size data have not been compiled previously at sufficient temporal resolution to permit quantitative analysis. In this study, we test the hyperoxia-gigantism hypothesis by examining the fossil record of fusulinoidean foraminifers, a dramatic example of protistan gigantism with some individuals exceeding 10 cm in length and exceeding their relatives by six orders of magnitude in biovolume. We assembled and examined comprehensive regional and global, species-level datasets containing 270 and 1823 species, respectively. A statistical model of size evolution forced by atmospheric pO(2) is conclusively favored over alternative models based on random walks or a constant tendency toward size increase. Moreover, the ratios of volume to surface area in the largest fusulinoideans are consistent in magnitude and trend with a mathematical model based on oxygen transport limitation. We further validate the hyperoxia-gigantism model through an examination of modern foraminiferal species living along a measured gradient in oxygen concentration. These findings provide the first quantitative confirmation of a direct connection between Paleozoic gigantism and atmospheric hyperoxia. © 2012 The Author(s). Evolution© 2012 The Society for the Study of Evolution.

  14. Middle Pleistocene infill of Hinkley Valley by Mojave River sediment and associated lake sediment: Depositional architecture and deformation by strike-slip faults

    Science.gov (United States)

    Miller, David; Haddon, Elizabeth; Langenheim, Victoria; Cyr, Andrew J.; Wan, Elmira; Walkup, Laura; Starratt, Scott W.

    2018-01-01

    Hinkley Valley in the Mojave Desert, near Barstow about 140 km northeast of Los Angeles and midway between Victorville Valley and the Lake Manix basin, contains a thick sedimentary sequence delivered by the Mojave River. Our study of sediment cores drilled in the valley indicates that Hinkley Valley was probably a closed playa basin with stream inflow from four directions prior to Mojave River inflow. The Mojave River deposited thick and laterally extensive clastic wedges originating from the southern valley that rapidly filled much of Hinkley Valley. Sedimentary facies representing braided stream, wetland, delta, and lacustrine depositional environments all are found in the basin fill; in some places, the sequence is greater than 74 m (245 ft) thick. The sediment is dated in part by the presence of the ~631 ka Lava Creek B ash bed low in the section, and thus represents sediment deposition after Victorville basin was overtopped by sediment and before the Manix basin began to be filled. Evidently, upstream Victorville basin filled with sediment by about 650 ka, causing the ancestral Mojave River to spill to the Harper and Hinkley basins, and later to Manix basin.Initial river sediment overran wetland deposits in many places in southern Hinkley Valley, indicating a rapidly encroaching river system. These sediments were succeeded by a widespread lake (“blue” clay) that includes the Lava Creek B ash bed. Above the lake sediment lies a thick section of interlayered stream sediment, delta and nearshore lake sediment, mudflat and/or playa sediment, and minor lake sediment. This stratigraphic architecture is found throughout the valley, and positions of lake sediment layers indicate a successive northward progression in the closed basin. A thin overlapping sequence at the north end of the valley contains evidence for a younger late Pleistocene lake episode. This late lake episode, and bracketing braided stream deposits of the Mojave River, indicate that the river

  15. Rock magnetic properties of sediments from Lake Sanabria and its catchment (NW Spain): paleoenvironmental implications

    Science.gov (United States)

    Larrasoaña, J. C.; Borruel, V.; Gómez-Paccard, M.; Rico, M.; Valero-Garces, B.; Moreno-Caballud, A.; Soto, R.

    2013-12-01

    Lake Sanabria is located in the NW Spanish mountains at 1000 m a.s.l., and constitutes the largest lake of glacial origin in the Iberian Peninsula. Here we present an environmental magnetic study of a Late Pleistocene-Holocene sediment core from Lake Sanabria and from different lithologies that crop out in its catchment, which includes Paleozoic plutonic, metamorphic and vulcanosedimentary rocks, and Quaternary deposits of glacial origin. This study was designed to complement sedimentologic and geochemical studies aimed at unraveling the climatic evolution of the NW Iberian Peninsula during the last deglaciation. Our results indicate that magnetite and pyrrhotite dominate the magnetic assemblage of both the sediments from the lower half of the studied sequence (25.6 - 13 cal kyr BP) deposited in a proglacial environment, and the Paleozoic rocks that make up most of the catchment of the lake. The occurrence of these minerals both in the catchment rocks and in the lake sediments indicates that sedimentation was then driven by the erosion of a glacial flour, which suffered minimal chemical transformation in response to a rapid and short routing to the lake. Sediments from the upper half of the studied sequence, accumulated after 12.4 cal kyr BP in a fluviolacustrine environment, contain magnetite and greigite. This points to a prominent role of post-depositional reductive dissolution, driven by a sharp increase in the accumulation of organic matter into the lake and the creation of anoxic conditions in the sediments, in shaping the magnetic assemblage of Holocene sediments. Pyrrhotite is stable under reducing conditions as opposed to magnetite, which is unstable. We therefore interpret that previous pedogenic processes occurred in the then deglaciated catchment of the lake were responsible for the oxidation of pyrrhotite and authigenic formation of magnetite, which survived subsequent reductive diagenesis given its initial larger concentrations. This interpretation is

  16. An application of sedimentation simulation in Tahe oilfield

    Science.gov (United States)

    Tingting, He; Lei, Zhao; Xin, Tan; Dongxu, He

    2017-12-01

    The braided river delta develops in Triassic low oil formation in the block 9 of Tahe oilfield, but its sedimentation evolution process is unclear. By using sedimentation simulation technology, sedimentation process and distribution of braided river delta are studied based on the geological parameters including sequence stratigraphic division, initial sedimentation environment, relative lake level change and accommodation change, source supply and sedimentary transport pattern. The simulation result shows that the error rate between strata thickness of simulation and actual strata thickness is small, and the single well analysis result of simulation is highly consistent with the actual analysis, which can prove that the model is reliable. The study area belongs to braided river delta retrogradation evolution process, which provides favorable basis for fine reservoir description and prediction.

  17. Lower Paleozoic carbonate rocks of Baird Mountains Quadrangle, Alaska

    Energy Technology Data Exchange (ETDEWEB)

    Dumoulin, J.A.; Harris, A.G.

    1985-04-01

    Lower Paleozoic carbonate rocks in the Baird Mountains quadrangle form a relatively thin (about 550 m), chiefly shallow-water succession that has been imbricately thrust and metamorphosed to lower greenschist facies. Middle and Upper Cambrian rocks - the first reported from the western Brooks Range - occur in the northeastern quarter of the quadrangle, south of Angayukaqsraq (formerly Hub) Mountain. They consist of marble grading upward into thin-bedded marble/dolostone couplets and contain pelagiellid mollusks, acetretid brachiopods, and agnostid trilobites. Sedimentologic features and the Pelagiellas indicate a shallow-water depositional environment. Overlying these rocks are Lower and Middle Ordovician marble and phyllite containing graptolites and conodonts of midshelf to basinal aspect. Upper Ordovician rocks in this area are bioturbated to laminated dolostone containing warm, shallow-water conodonts. In the Omar and Squirrel Rivers areas to the west, the Lower Ordovician carbonate rocks show striking differences in lithofacies, biofacies, and thickness. Here they are mainly dolostone with locally well-developed fenestral fabric and evaporite molds, and bioturbated to laminated orange- and gray-weathering dolomitic marble. Upper Silurian dolostone, found near Angayukaqsraq Mountain and on the central Squirrel River, contains locally abundant corals and stronmatoporoids. Devonian carbonate rocks are widely distributed in the Baird Mountains quadrangle; at least two distinct sequences have been identified. In the Omar area, Lower and Middle Devonian dolostone and marble are locally cherty and rich in megafossils. In the north-central (Nakolik River) area, Middle and Upper Devonian marble is interlayered with planar to cross-laminated quartz-carbonate metasandstone and phyllite.

  18. Geology of the eastern emerald belt (EEB)

    International Nuclear Information System (INIS)

    Moreno, Giovani; Terraza, Roberto; Montoya, Diana

    2009-01-01

    The stratigraphic record in EEB begins with an upper Paleozoic basal siliciclastic sequence (Farallones Group, Devonian - Carboniferous), unconformably overlain by basal Cretaceous formations (Bata to the east, Santa Rosa - Ubala - Chivor to the west o the Quetame Massif). The Cretaceous marine ingression took place in a tectonically active basin since Triassic and Jurassic. This tectonic setting last until the end of earliest Cretaceous giving place to a thick sedimentary sequence made of the aforementioned basal units and the Lutitas de Macanal, Las Juntas, Fomeque and Une formations. Paleozoic basement highs normal fault bounded, restrict the Cretaceous sedimentation in the EEB zone, this is evidence especially for the basal Cretaceous units (Berriasian). In this way, to the east of Montecristo Anticline (overlaying Farallones Group) we found conglomerates (Bata Formation), instead to the west sedimentation was mainly lodolithic (Santa Rosa Formation, new litostratigraphic unit). Toward Ubala, overlaying Paleozoic basement (Farallones Anticline) rest a calcareous -Terrigenous set (Ubala Formation new litostratigraphic unit). In Chivor - Malacara area we found evaporitic sets with calcareous rocks (Chivor Formation, new litostratigraphic unit) overlaying Santa Rosa Formation. In Valanginian times the sea regionally drown the area of EEB and give rise to marine offshore conditions (Lutitas de Macanal Formation) with episodic events of gravity flows (El Figaro - Los Cedros members). During Hauterivian to Albian times the accumulation of a sandy - muddy sediments in tidal fats or deltaic systems give rise the record of Las Juntas -Une formations. Finally in Barremian early Albian times there are a siliciclastic - calcareous record of marine offshore environments (Fomeque Formation).

  19. Detrital zircon provenance from three turbidite depocenters of the Middle-Upper Triassic Songpan-Ganzi complex, central China: Record of collisional tectonics, erosional exhumation, and sediment production

    Science.gov (United States)

    Weislogel, A.L.; Graham, S.A.; Chang, E.Z.; Wooden, J.L.; Gehrels, G.E.

    2010-01-01

    To test the idea that the voluminous upper Middle to Upper Triassic turbidite strata in the Songpan-Ganzi complex of central China archive a detrital record of Dabie ultrahigh-pressure (UHP) terrane unroofing, we report 2080 single detrital U-Pb zircon ages by sensitive high-resolution ion microprobe-reverse geometry (SHRIMP-RG) and laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) analysis from 29 eastern Songpan-Ganzi complex sandstone samples. Low (Th/U zircons, consistent with crystallization under UHP conditions, are rare in eastern Songpan-Ganzi complex zircon, and U-Pb ages of low Th/U zircons are incompatible with a Dabie terrane source. An unweighted pair group method with arithmetic mean nearest-neighbor analysis of Kolmogorov-Smirnov two-sample test results reveals that the eastern Songpan-Ganzi complex is not a single contiguous turbidite system but is instead composed of three subsidiary depocenters, each associated with distinct sediment sources. The northeastern depocenter contains zircon ages characterized by Paleozoic and bimodally distributed Precambrian zircon populations, which, together with south-to southeast-directed paleocurrent data, indicate derivation from the retro-side of the Qinling-Dabie (Q-D) collisional orogen wedge. In the central depocenter, the dominantly Paleozoic detrital zircon signature and south-to southwest-oriented paleocurrent indicators reflect a profusion of Paleozoic zircon grains. These data are interpreted to reflect an influx of material derived from erosion of Paleozoic supra-UHP rocks of the Dabie terrane in the eastern Qinling-Dabie orogen, which we speculate may have been enhanced by development of a monsoonal climate. This suggests that erosional unroofing played a significant role in the initial phase of UHP exhumation and likely influenced the petrotectonic and structural evolution of the Qinling-Dabie orogen, as evidenced by compressed Triassic isotherms/grads reported in the Huwan

  20. Criteria for the recognition and correlation of sandstone units in the Precambrian and Paleozoic-Mesozoic clastic sequence in the near east

    Science.gov (United States)

    Weissbrod, T.; Perath, I.

    units. Clay minerals, though subordinate, characterize certain units. Illite is usually the dominant clay mineral in the Precambrain-Paleozoic sediments, showing different degress of crystallization in different units. Kaolinite is the main, often the only clay mineral in Mesozoic units. Heavy minerals, whose species spectra reflect on parent rock and provenance terrain and whose differential response to degradation points to the sedimentary history of the deposit, show certain vertical regularities, such as the abrupt disappearance of species or whole assemblages at certain levels, indicating unconformities. Trace metals, which in places reach ore concentrations (e.g. copper), are often extensive, though of well-defined vertical distribution. They express adsorptive capacity of specific widespread lithologies, enabling the discrimination of units. Even though each of these criteria is not always by itself diagnostic, they may in conjuction with one or more other criteria amount to a petrographic fingerprint that enables fairly accurate identification of the age interval of the unit, and its relation both to the regional and the local stratigraphic sequence.

  1. A sedimentation study in the Muda catchment area using nuclear techniques

    International Nuclear Information System (INIS)

    Kamarudin Samuding; Wan Zakaria Wan Muhamad Tahir; Roslan Mohd Ali; Juhari Yusuf

    2002-01-01

    A study on the sediment size distribution and determination of sediment density profile was conducted in a selected area of the Muda Dam catchment area, Kedah. The objective of the study was to establish baseline data of the input sedimentation with regard to the effects of development within the catchment in the future. Three main sampling locations were identified, namely at Sungai Teliang, Sungai Muda and the Muda Reservoir. Results showed that the grain size distribution of sediment generally ranged from clay to gravel size. In the reservoir and downstream the river, most of the samples studied consisted of fine sediment Le, silt and clay (< 63 μm). However, sediment distribution in the upstream section of Sungai Teliang mainly consisted of fine to coarse sand. Based on the sediment distribution profile analysis, the study site could be divided into two parts comprising the dynamic area (region) covering selected locations along the river and the deposited sediment in the reservoir. Measurement of sediment thickness was performed using nuclear gauges, i.e. direct transmission and backscattering methods. The result also showed that the thickness of bed sediment varied from one location to another, whereby the thickness variation could reach up to 0.75 metre in some areas. This study could assist local authorities (AMDA) in identifying the rates and sources of accumulated sediment as well as quality and quantity of water in the study area in order to sustain distribution of good quality water to the farmers. (Author)

  2. Archean inheritance in zircon from late Paleozoic granites from the Avalon zone of southeastern New England: an African connection

    Science.gov (United States)

    Zartman, R.E.; Don, Hermes O.

    1987-01-01

    In southeastern New England the Narragansett Pier Granite locally intrudes Carboniferous metasedimentary rocks of the Narragansett basin, and yields a monazite UPb Permian emplacement age of 273 ?? 2 Ma. Zircon from the Narragansett Pier Granite contains a minor but detectable amount of an older, inherited component, and shows modern loss of lead. Zircon from the late-stage, aplitic Westerly Granite exhibits a more pronounced lead inheritance -permitting the inherited component to be identified as Late Archean. Such old relict zircon has not been previously recognized in Proterozoic to Paleozoic igneous rocks in New England, and may be restricted to late Paleozoic rocks of the Avalon zone. We suggest that the Archean crustal component reflects an African connection, in which old Archean crust was underplated to the Avalon zone microplate in the late Paleozoic during collision of Gondwanaland with Avalonia. ?? 1987.

  3. The volcanic rocks construction of the late paleozoic era and uranium mineralization in Beishan area of Gansu province

    International Nuclear Information System (INIS)

    An Zhengchang; Luo Xiaoqiang

    2010-01-01

    Late Paleozoic volcanic rocks in Beishan area are the favorable constructions of hydrothermal type and volcanic type deposit. From the distribution of volcanic rocks, the volcanic compositions, the volcanic facies, volcanic eruption method and rhythm, chemical and trace elements compositions, and so on, it discusses the characteristics of the Late Devonian volcanic construction in this area and its relationship with uranium mineralization, analyzes the role of volcanic ore-control mechanism, and summarizes uranium ore forming regularity of volcanic construction in Late Paleozoic. (authors)

  4. Mapping the sub-trappean Mesozoic sediments in the western part of Narmada-Tapti region of Deccan Volcanic Province, India

    Science.gov (United States)

    Murty, A. S. N.; Sarkar, Dipankar; Sen, Mrinal K.; Sridher, V.; Prasad, A. S. S. S. R. S.

    2014-10-01

    Deccan Traps spread over large parts of south, west and central India, possibly hiding underneath sediments with hydrocarbon potential. Here, we present the results of seismic refraction and wide-angle reflection experiments along three profiles, and analyze them together the results from all other refraction profiles executed earlier in the western part of Narmada-Tapti region of the Deccan Volcanic Province (DVP). We employ travel time modelling to derive the granitic basement configuration, including the overlying Trap and sub-trappean sediment thickness, if any. Travel time skips and amplitude decay in the first arrival refraction data are indicative of the presence of low velocity sediments (Mesozoic), which are the low velocity zones (LVZ) underneath the Traps. Reflection data from the top of LVZ and basement along with the basement refraction data have been used to derive the Mesozoic sediment thickness. In the middle and eastern parts of the study region between Narmada and Tapti, the Mesozoic sediment thickness varies between 0.5 and 2.0 km and reaches more than 2.5 km south of Sendhwa between Narmada and Tapti Rivers. Thick Mesozoic sediments in the eastern parts are also accompanied by thick Traps. The Mesozoic sediments along the present three profiles may not be much prospective in terms of its thickness, except inside the Cambay basin, where the subtrappean sediment thickness is about 1000-1500 m. In the eastern part of the study area, the deepest section (>4 km) has thick (∼2 km) Mesozoic sediments, but with almost equally thick Deccan Trap cover. Results of the present study provide important inputs for future planning for hydrocarbon exploration in this region.

  5. Uranium hydrogeochemical and stream sediment reconnaissance of the Durango NTMS quadrangle, Colorado

    International Nuclear Information System (INIS)

    Dawson, H.E.; Weaver, T.A.

    1979-01-01

    During the spring and summer of 1976, 1518 water and 1604 waterborne sediment samples were collected from 1804 locations in the Durango NTMS quadrangle, Colorado. The samples obtained from this 19 940-km 2 area were analyzed at the Los Alamos Scientific Laboratory for total uranium. The uranium concentrations in waters ranged from less than the detectable limit of 0.2 ppB to 25.7 ppB, with a mean value of 0.84 ppB. The concentrations in sediments ranged from 1.0 ppM to 71.6 ppM, with a mean value of 4.2 ppM. Study of total water and total sediment populations indicated that both are actually mixtures of several populations. Consequently, samples were chosen for discussion on the basis of their having conspicuously high uranium concentrations relative to surrounding background values. Thirty-four water samples (approximately 2.2% of the total water population) had uranium concentrations above 5.00 ppB, the highest of which were well water samples from the San Luis Valley. Thirty-seven sediment samples (approximately 2.3% of the total sediment population) had uranium concentrations above 12.0 ppM. The majority of these were taken from sites in Precambrian rocks, but several came from Paleozoic and Mesozoic strate and Tertiary volcanics. The uranium concentrations in sediment samples from areas of Precambrian rock were especially high and these areas may warrant further, more detailed investigations

  6. Palynological study (spores, Acritarchs and Chitinozoans) in the paleozoic (Cambrian to Dinantian) of western and meridional Morocco (biostratigraphy, paleo-bio-geography and characterisation of organic matter); Etude palynologique (spores, Chitinozoaires, Acritarches) dans le Paleozoique: Cambrien a Dinantien du Maroc occidental et meridional (biostratigraphie, paleobiogeographie et caracterisation de la matiere organique)

    Energy Technology Data Exchange (ETDEWEB)

    Rahmani, K.

    1995-01-27

    The palynological study of paleozoic levels in ten wells and two cross sections in western and meridional Morocco has permit to establish the inventory of organic micro-fossils. Some of these are spores and Acritarchs which constitute much rich and more conserved than to Chitinozoans. The different associations yield from the middle Cambrian to the lower Carboniferous have allowed the setting of a bio-zonation. This latter, consists of 7 biozones based on Carboniferous and Acritarchs in the lower Paleozoic, and 12 biozones in the Devonian and lower Carboniferous based essentially on the spores. This bio-zonation however, does not provide full information. This is due to the degradation of the micro-fossils, their absence of an unsuitable facies, a shortage of samples, erosion or lack of sedimentation. Most of these short comings were dated and their importance was considered in relation to the different epeirogeny known in Morocco. The biozones distinguished were based on index taxa of spores, Chitinozoans or Acritarchs which coexist with biostratigraphic micro-fossils in Morocco or in others regions referred to. This biozones allowed: the indication of the precision of many subdivisions within the Paleozoic of the studied areas the setting of local, regional and intercontinental correlations, subsequently: Anti-Atlas, Moroccan Meseta, Algeria, Libya, North, America, Canada and Europe. The paleo-bio-geographic evolution traced from the middle Cambrian to the lower Carboniferous has demonstrated that the position of Morocco between north Gondwana and Avalonia zone at the lower Paleozoic and between Africa and Europe during the upper Paleozoic, has associated this area to different geological phenomena. Morocco also constituted a paleo-bio-geographic bridge which has allowed diverse exchanges, especially floristic one, between the Gondvanian and the Laurasian domains. This privileged position of Morocco in the geographic and geologic line has certainly influenced the

  7. Sediment sources and their Distribution in Chwaka Bay, Zanzibar ...

    African Journals Online (AJOL)

    This work establishes sediment sources, character and their distribution in Chwaka Bay using (i) stable isotopes compositions of organic carbon (OC) and nitrogen, (ii) contents of OC, nitrogen and CaCO3, (iii) C/N ratios, (iv) distribution of sediment mean grain size and sorting, and (v) thickness of unconsolidated sediments.

  8. Seismic Azimuthal Anisotropy of the Lower Paleozoic Shales in Northern Poland: can we reliably detect it?

    Science.gov (United States)

    Cyz, Marta; Malinowski, Michał

    2017-04-01

    Analysis of the azimuthal anisotropy is an important aspect of characterization the Lower Paleozoic shale play in northern Poland, since it can be used to map pre-existing fracture networks or help in optimal placement of the horizontal wells. Previous studies employed Velocity versus Azimuth (VVAz) method and found that this anisotropy is weak - on the order of 1-2%, only locally - close to major fault zones - being higher (ca. 7%). This is consistent with the recent re-interpretation of the cross-dipole sonic data, which indicates average shear wave anisotropy of 1%. The problem with the VVAz method is that it requires good definition of the interval, for which the analysis is made and it should be minimum 100 ms thick. In our case, the target intervals are thin - upper reservoir (Lower Silurian Jantar formation) is 15 m thick, lower reservoir (Upper Ordovician Sasino formation) is 25 m thick. Therefore, we prefer to use the Amplitude vs Azimuth (AVAz) method, which can be applied on a single horizon (e.g. the base of the reservoir). However, the AVAz method depends critically on the quality of the seismic data and preservation of amplitudes during processing. On top of the above mentioned issues, physical properties of the Lower Paleozoic shales from Poland seem to be unfavourable for detecting azimuthal anisotropy. For example, for both target formations, parameter g=(Vs/Vp)2 is close to 0.32, which implies that the anisotropy expressed by the anisotropic gradient in the dry (i.e. gas-filled fractures) case is close to zero. In case of e.g. the Bakken Shale, g is much higher (0.38-0.4), leading to a detectable anisotropic signature even in the dry case. Modelling of the synthetic AVAz response performed using available well data suggested that anisotropic gradient in the wet (fluid-filled) case should be detectable even in case of the weak anisotropy (1-2%). This scenario is consistent with the observation, that the studied area is located in the liquid

  9. Global plate boundary evolution and kinematics since the late Paleozoic

    Science.gov (United States)

    Matthews, Kara J.; Maloney, Kayla T.; Zahirovic, Sabin; Williams, Simon E.; Seton, Maria; Müller, R. Dietmar

    2016-11-01

    Many aspects of deep-time Earth System models, including mantle convection, paleoclimatology, paleobiogeography and the deep Earth carbon cycle, require high-resolution plate motion models that include the evolution of the mosaic of plate boundaries through time. We present the first continuous late Paleozoic to present-day global plate model with evolving plate boundaries, building on and extending two previously published models for the late Paleozoic (410-250 Ma) and Mesozoic-Cenozoic (230-0 Ma). We ensure continuity during the 250-230 Ma transition period between the two models, update the absolute reference frame of the Mesozoic-Cenozoic model and add a new Paleozoic reconstruction for the Baltica-derived Alexander Terrane, now accreted to western North America. This 410-0 Ma open access model provides a framework for deep-time whole Earth modelling and acts as a base for future extensions and refinement. We analyse the model in terms of the number of plates, predicted plate size distribution, plate and continental root mean square (RMS) speeds, plate velocities and trench migration through time. Overall model trends share many similarities to those for recent times, which we use as a first order benchmark against which to compare the model and identify targets for future model refinement. Except for during the period 260-160 Ma, the number of plates (16-46) and ratio of "large" plates (≥ 107.5 km2) to smaller plates ( 2.7-6.6) are fairly similar to present-day values (46 and 6.6, respectively), with lower values occurring during late Paleozoic assembly and growth of Pangea. This temporal pattern may also reflect difficulties in reconstructing small, now subducted oceanic plates further back in time, as well as whether a supercontinent is assembling or breaking up. During the 260-160 Ma timeframe the model reaches a minima in the number of plates, in contrast to what we would expect during initial Pangea breakup and thus highlighting the need for refinement

  10. The late Paleozoic ecological-evolutionary laboratory, a land-plant fossil record perspective

    NARCIS (Netherlands)

    Looy, Cindy; Kerp, Hans; Duijnstee, Ivo; DiMichele, Bill

    2014-01-01

    In this essay we examine the fossil record of land plants, focusing on the late Paleozoic. We explore the nature of this record in terms of what is preserved, where, why and with what biases. And as a consequence, how it can be used to answer questions posed at various spatial and temporal scales,

  11. Gneiss Macuira: tectonic evolution of Paleozoic metamorphic rocks of the Alta Guajira, Colombia

    International Nuclear Information System (INIS)

    Lopez I; A Julian; Zuluaga C; A, Carlos

    2012-01-01

    The Macuira Gneiss is a Paleozoic metamorphic unit that outcrops in the Simarua, Jarara and Macuira ranges, Alta Guajira. It is composed by a lithologies metamorphosed under amphibolite facies P-T conditions and consist of amphibolitic and quartz feldspathic gneisses, amphibolites, schists, pegmatites, calc-silicated rocks and marbles, with migmatization evidences in gneisses and amphibolites. Five foliations (S1-5) and three folding events (F1-3) were identified and interpreted as product of two metamorphic events, developed in a progressive barrovian metamorphic gradient of intermediate pressure with intermediate P-T ratio, interpreted as product of continental collision tectonics. This unit is important in understanding of the tectonic evolution of the Alta Guajira and Caribbean because it records different deformational phases pre-, syn- and post-migmatitic, that could be related with different tectonic episodes: the first associated with the collision between Laurasia and Gondwana (Alleghanian Orogeny - Late Paleozoic), and the second related with the Caribbean Plate evolution (Andean Orogeny - Meso-Cenozoic).

  12. The fossil record, function, and possible origins of shell color patterns in Paleozoic marine invertebrates

    Energy Technology Data Exchange (ETDEWEB)

    Kobluk, D.R. (Univ. of Toronto, Ontario (Canada)); Mapes, R.H. (Ohio Univ., Athens (USA))

    1989-02-01

    Fossil invertebrate shells and carapaces displaying preserved original color patterns are among the rarest fossils. The fossil record of color patterns extends into the Middle Cambrian where the trilobite Anomocare displays a fan-like array of stripes on the pygidium. About 180 Paleozic genera are known with patterns, including trilobites, cephalopods, gastropods, brachiopods, bivalves, crinoids, and crustaceans. Based upon an analysis of these taxa, it appears that patterns and pigments in middle and late Paleozoic invertebrates may have served several functions such as warning displays, light screening, camouflage, or waste disposal. However, the presence of color patterns in fossil invertebrates in the early Paleozoic may have developed prior to the evolution of vision sufficiently sophisticated to see them. This suggests that camouflage and warning displays were not the original functions of color patterns, and that in the earliest Paleozoic they may not have been functional. The authors propose a hypothesis that involves three developmental phases in the evolution of invertebrate color patterns: (1) the incorporation of metabolic by-products, perhaps some pigmented and some not pigmented, into shells and carapaces as a means of disposal of dietary or metabolic wastes, (2) use of these pigments and patterns as an environmental adaptation, such as light screening, and (3) display during and following the evolution of vision in predators sufficiently sophisticated to see the patterns.

  13. Characteristics of the Paleozoic slope break system and its control on stratigraphic-lithologic traps: An example from the Tarim Basin, western China

    Directory of Open Access Journals (Sweden)

    Hao Liu

    2015-07-01

    Full Text Available Based on comprehensive analyses of seismic and log data, this study indicates that mainly four widespread angular to minor angular unconformities (Tg8, Tg51, Tg5 and Tg3 were formed during the Paleozoic. Through the interpretation of structural unconformities, calculation of eroded thickness, correction of palaeo-water depth and compaction and compilation of the Early Paleozoic structural maps, the Early Paleozoic slope break belt (geomorphologic unit of the Tarim Basin is subdivided into uplift area, subaqueous uplift area, rift slope break belt, flexure slope break belt (slope belt, depression area and deep basin area. Palaeogeomorphology of the Cambrian-Early Ordovician was approximately in EW trend within which three tectonic units including the Tabei Palaeo-uplift, the northern Depressional Belt and the southern Palaeo-uplift developed respectively and are grouped into two slope break systems namely as the Tabei Palaeo-uplift and the southern Palaeo-uplift. These tectonic units obviously control the deposition of isolated platform, open platform, restricted platform and deep basin. Influenced by extrusion in the Mid-Late Ordovician, the southern and northern subaqueous uplifts gradually elevated and then were eroded. Resultantly two slope break systems developed, namely as the northern and central Palaeo-uplifts which obviously controlled the deposition of provenance area, isolated platform, mixed continental shelf, slope and basin facies. The intensive extrusion of the Mid-Late Ordovician leads to significant tectonic deformation of the Tarim Basin: large area of uplifting and erosion and development of EW trending anticline and syncline. Deposition of shore, tidal flat, delta, shallow marine clastics and deep marine facies is obviously controlled by the Tabei, the southern and the Tadong Palaeo-uplifts. Slope break systems control development of stratigraphic unconformity and thus truncation and onlap unconformity zones become favorable

  14. Oral Region Homologies in Paleozoic Crinoids and Other Plesiomorphic Pentaradial Echinoderms

    OpenAIRE

    Kammer, Thomas W.; Sumrall, Colin D.; Zamora, Samuel; Ausich, William I.; Deline, Bradley

    2013-01-01

    The phylogenetic relationships between major groups of plesiomorphic pentaradial echinoderms, the Paleozoic crinoids, blastozoans, and edrioasteroids, are poorly understood because of a lack of widely recognized homologies. Here, we present newly recognized oral region homologies, based on the Universal Elemental Homology model for skeletal plates, in a wide range of fossil taxa. The oral region of echinoderms is mainly composed of the axial, or ambulacral, skeleton, which apparently evolved ...

  15. Structural Characteristics of Paleozoic and Geological Significance of Oil and Gas of Dongpu Depression

    Institute of Scientific and Technical Information of China (English)

    杨世刚

    2003-01-01

    The Dongpu depression has experienced a complicated evolution of structure since Mesozoic. The Paleozoic carbonate rock has been strongly reformed and the buried hills with different characteristics of structure are developed in the depression. There exist lots of groups of fault structures with strikes of NNE(or NE),NW, near NS and EW etc., of which the faults with strikes of NNE and NW play an important controlling role on present-day structural framework of the depression. The faults with near NS-striking and EW-striking deeply affect the establishment of structural framework of basement of the depression. Although most of the fractures are filled by calcite and other minerals, under the action of later structural stress, the earlier fractures could change their features into tensional ones. Therefore, much attention should be paid to the exploration and exploitation of Paleozoic oil and gas in Dongpu depression.

  16. High-resolution sequence stratigraphy of lower Paleozoic sheet sandstones in central North America: The role of special conditions of cratonic interiors in development of stratal architecture

    Science.gov (United States)

    Runkel, Anthony C.; Miller, J.F.; McKay, R.M.; Palmer, A.R.; Taylor, John F.

    2007-01-01

    continuum of variable stratigraphic packages reflecting variable controls such as subsidence and shelf physiography. Special conditions of exceptionally slow subsidence rate, shallow bathymetry, and nearly flat regional shelf gradient are manifest mostly by the presence of individual systems tracts of relatively long duration that extend for much greater distances across depositional strike than those that characterize successions deposited in more dynamic tectonic and physiographic settings. These results suggest that if other cratonic interior successions are as anomalous as reported, a low sediment supply may have played a primary role in development of their apparently condensed stratal architecture. The results also lead us to suggest that a nonvegetated lower Paleozoic landscape played a relatively insignificant role in the development of what are commonly perceived to be enigmatic stratigraphic features of sheet sandstones, particularly their widespread yet thin geometry, and a scarcity of shale and siltstone. ?? 2007 Geological Society of America.

  17. The Acampamento Velho Formation is a succession of rhyolitic basaltic belong to the lower Paleozoic.: Geochemical characterization of the trace elements and strange lands

    International Nuclear Information System (INIS)

    De Almeida, M.; Zerfass, H.; De Lima, L.

    1998-01-01

    During at the end of Brazilian orogeny cycle (lower Paleozoic), the Camaqua basin was filled by a thick vulcanic series, named Acampamento Velho Formation , which consists of a recurrence of basaltic episodes (at the base) and the alternance of pyroclastic rocks with a rhyolitic composition TBr and Igr) in the intermediate portion and rhyolitic flows (Dr) at the top. Based on the geochemical results, especially on the trace elements such as Zr, Ti, Nb, Y, YB,Th. Ta and the REE., it is confirmed the stratigraphical succession and the depositation chronological order observed in the field. All the volcanic succession presents a behavior pattern typical of post- collisional orogenic, rocks, originated from the crustal contamination of basaltic magmas generated in an environment of the active continental margin. (author)

  18. Pacing of Paleozoic macroevolutionary rates by Milankovitch grand cycles.

    Science.gov (United States)

    Crampton, James S; Meyers, Stephen R; Cooper, Roger A; Sadler, Peter M; Foote, Michael; Harte, David

    2018-05-29

    Periodic fluctuations in past biodiversity, speciation, and extinction have been proposed, with extremely long periods ranging from 26 to 62 million years, although forcing mechanisms remain speculative. In contrast, well-understood periodic Milankovitch climate forcing represents a viable driver for macroevolutionary fluctuations, although little evidence for such fluctuation exists except during the Late Cenozoic. The reality, magnitude, and drivers of periodic fluctuations in macroevolutionary rates are of interest given long-standing debate surrounding the relative roles of intrinsic biotic interactions vs. extrinsic environmental factors as drivers of biodiversity change. Here, we show that, over a time span of 60 million years, between 9 and 16% of the variance in biological turnover (i.e., speciation probability plus species extinction probability) in a major Early Paleozoic zooplankton group, the graptoloids, can be explained by long-period astronomical cycles (Milankovitch "grand cycles") associated with Earth's orbital eccentricity (2.6 million years) and obliquity (1.3 million years). These grand cycles modulate climate variability, alternating times of relative stability in the environment with times of maximum volatility. We infer that these cycles influenced graptolite speciation and extinction through climate-driven changes to oceanic circulation and structure. Our results confirm the existence of Milankovitch grand cycles in the Early Paleozoic Era and show that known processes related to the mechanics of the Solar System were shaping marine macroevolutionary rates comparatively early in the history of complex life. We present an application of hidden Markov models to macroevolutionary time series and protocols for the evaluation of statistical significance in spectral analysis.

  19. First-order control of syntectonic sedimentation on crustal-scale structure of mountain belts

    Science.gov (United States)

    Erdős, Zoltán.; Huismans, Ritske S.; van der Beek, Peter

    2015-07-01

    The first-order characteristics of collisional mountain belts and the potential feedback with surface processes are predicted by critical taper theory. While the feedback between erosion and mountain belt structure has been fairly extensively studied, less attention has been given to the potential role of synorogenic deposition. For thin-skinned fold-and-thrust belts, recent studies indicate a strong control of syntectonic deposition on structure, as sedimentation tends to stabilize the thin-skinned wedge. However, the factors controlling basement deformation below fold-and-thrust belts, as evident, for example, in the Zagros Mountains or in the Swiss Alps, remain largely unknown. Previous work has suggested that such variations in orogenic structure may be explained by the thermotectonic "age" of the deforming lithosphere and hence its rheology. Here we demonstrate that sediment loading of the foreland basin area provides an additional control and may explain the variable basement involvement in orogenic belts. When examining the role of sedimentation, we identify two end-members: (1) sediment-starved orogenic systems with thick-skinned basement deformation in an axial orogenic core and thin-skinned deformation in the bordering forelands and (2) sediment-loaded orogens with thick packages of synorogenic deposits, derived from the axial basement zone, deposited on the surrounding foreland fold-and-thrust belts, and characterized by basement deformation below the foreland. Using high-resolution thermomechanical models, we demonstrate a strong feedback between deposition and crustal-scale thick-skinned deformation. Our results show that the loading effects of syntectonic sediments lead to long crustal-scale thrust sheets beneath the orogenic foreland and explain the contrasting characteristics of sediment-starved and sediment-loaded orogens, showing for the first time how both thin- and thick-skinned crustal deformations are linked to sediment deposition in these

  20. Late Archaean-early Proterozoic source ages of zircons in rocks from the Paleozoic orogen of western Galicia, NW Spain

    Energy Technology Data Exchange (ETDEWEB)

    Kuijper, R P; Priem, H N.A. [Laboratorium voor Isotopen-Geologie, Amsterdam (Netherlands); Den Tex, E [Rijksuniversiteit Utrecht (Netherlands). Inst. voor Aardwetenschappen

    1982-08-01

    U-Pb data are reported for nine suites of zircons and three monazites from the Paleozoic orogen in western Galicia: one paragneiss and six orthogneisses from the early Paleozoic basement, and two Carboniferous (ca. 310 Ma old) intrusions of two-mica granite. New whole-rock Rb-Sr analyses, along with earlier data, indicate an age of ca. 470-440 Ma (Ordovician) for the emplacement of the granitic precursors of the orthogneisses. Monazite from the paragneiss also yields an U-Pb age of ca. 470 Ma. From the high initial /sup 87/Sr//sup 86/Sr ratios an involvement of Precambrian continental crust material is evident in the generation of the early Paleozoic suite of granites, while the zircon U-Pb data give evidence of the presence of about 3.0-2.0 Ga old (late Archaean-early Proterozoic) components in the source material. Zircons from the oldest sedimentary rocks in the area, now present as catazonal paragneisses and a likely source for the granites, likewise reveal a provenance age of 3.0-2.0 Ga.

  1. Lime stabilization of fine-grained sediments in western Greenland

    DEFF Research Database (Denmark)

    Jørgensen, Anders Stuhr; Ingeman-Nielsen, Thomas; Skels, Peteris

    2011-01-01

    Thick deposits of fine-grained marine sediments exist in large areas of western Greenland. Many places these sediments are located above sea-level, and now complicate construction projects in urban areas. The mineralogy of the fine-grained sediments is very different from European sediments, mainly...... due to the cold climate, and it is therefore of great interest to study possible methods to improve the stability and strength properties. This project includes laboratory studies of lime stabilization on fine-grained marine sediments from Kangerlussuaq, western Greenland. The results have included...

  2. Late Paleozoic volcanic rocks of the Intra-Sudetic Basin, Bohemian Massif: Petrological and geochemical characteristics

    Czech Academy of Sciences Publication Activity Database

    Ulrych, Jaromír; Fediuk, F.; Lang, Miloš; Martinec, Petr

    2004-01-01

    Roč. 64, č. 2 (2004), s. 127-153 ISSN 0009-2819 R&D Projects: GA AV ČR(CZ) IAA3013903 Keywords : Late Paleozoic * volcanic rocks * Bohemian Massif Subject RIV: DB - Geology ; Mineralogy Impact factor: 0.643, year: 2004

  3. Hydrologic properties and ground-water flow systems of the Paleozoic rocks in the upper Colorado River basin in Arizona, Colorado, New Mexico, Utah, and Wyoming, excluding the San Juan Basin

    Science.gov (United States)

    Geldon, Arthur L.

    2003-01-01

    The hydrologic properties and ground-water flow systems of Paleozoic sedimentary rocks in the Upper Colorado River Basin were investigated under the Regional Aquifer-System Analysis (RASA) program of the U.S. Geological Survey in anticipation of the development of water supplies from bedrock aquifers to fulfill the region's growing water demands. The study area, in parts of Arizona, Colorado, New Mexico, Utah, and Wyoming, covers about 100,000 square miles. It includes parts of four physiographic provinces--the Middle Rocky Mountains, Wyoming Basin, Southern Rocky Mountains, and Colorado Plateaus. A variety of landforms, including mountains, plateaus, mesas, cuestas, plains, badlands, and canyons, are present. Altitudes range from 3,100 to 14,500 feet. Precipitation is distributed orographically and ranges from less than 6 inches per year at lower altitudes to more than 60 inches per year in some mountainous areas. Most of the infrequent precipitation at altitudes of less than 6,000 feet is consumed by evapotranspiration. The Colorado and Green Rivers are the principal streams: the 1964-82 average discharge of the Colorado River where it leaves the Upper Colorado River Basin is 12,170 cubic feet per second (a decrease of 5,680 cubic feet per second since construction of Glen Canyon Dam in 1963). On the basis of their predominant lithologic and hydrologic properties, the Paleozoic rocks are classified into four aquifers and three confining units. The Flathead aquifer, Gros Ventre confining unit, Bighorn aquifer, Elbert-Parting confining unit, and Madison aquifer (Redwall-Leadville and Darwin-Humbug zones) make up the Four Corners aquifer system. A thick sequence, composed mostly of Mississippian and Pennsylvanian shale, anhydrite, halite, and carbonate rocks--the Four Corners confining unit (Belden-Molas and Paradox-Eagle Valley subunits)--overlies the Four Corners aquifer system in most areas and inhibits vertical ground-water flow between the Four Corners aquifer

  4. Two possibilities for New Siberian Islands terrane tectonic history during the Early Paleozoic based on paleomagnetic data

    Science.gov (United States)

    Metelkin, Dmitry V.; Chernova, Anna I.; Vernikovsky, Valery A.; Matushkin, Nikolay Yu.

    2017-04-01

    The New Siberian Islands (NSI), located in the East Siberian Sea in the junction region of various structural elements, are a key target for deciphering the tectonic evolution of the Eastern Arctic. In recent years, we went on several expeditions and gathered an extensive geological material for this territory. Among other things, we could prove that the basement of the De Long and Anjou archipelagos structures is Precambrian and the overlying Paleozoic sections formed within the same terrane. The form of the boundaries of the NSI terrane are actively debated and are probably continued from the Lyakhovsky islands in the south-west to the southern parts of the submerged Mendeleev Ridge, for which there is increasing evidence of continental crust. Today there are several models that interpret the Paleozoic-Mesozoic tectonic history and structural affiliation of the NSI terrane. Some propose that the Paleozoic sedimentary section formed in a passive margin setting of the Siberian paleocontinent. Others compare its history with marginal basins of the Baltica and Laurentia continents or consider the NSI terrane as an element of the Chukotka-Alaska microplate. These models are mainly based on results of paleobiogeographical and lithological-facies analyses, including explanations of probable sources for detrital zircons. Our paleomagnetic research on sedimentary, volcanogenic-sedimentary and igneous rocks of the Anjou (Kotelny and Bel'kovsky islands) and De Long (Bennett, Jeannette and Henrietta islands) archipelagos let us calculate an apparent polar wander path for the early Paleozoic interval of geological history, which allows us to conclude that the NSI terrane could not have been a part of the continental plates listed above, but rather had active tectonic boundaries with them. Our paleomagnetic data indicate that the NSI terrane drifted slowly and steadily in the tropical and subtropical regions no higher than 40 degrees. However, the main uncertainty for the

  5. Terrestrial Sediments of the Earth: Development of a Global Unconsolidated Sediments Map Database (GUM)

    Science.gov (United States)

    Börker, J.; Hartmann, J.; Amann, T.; Romero-Mujalli, G.

    2018-04-01

    Mapped unconsolidated sediments cover half of the global land surface. They are of considerable importance for many Earth surface processes like weathering, hydrological fluxes or biogeochemical cycles. Ignoring their characteristics or spatial extent may lead to misinterpretations in Earth System studies. Therefore, a new Global Unconsolidated Sediments Map database (GUM) was compiled, using regional maps specifically representing unconsolidated and quaternary sediments. The new GUM database provides insights into the regional distribution of unconsolidated sediments and their properties. The GUM comprises 911,551 polygons and describes not only sediment types and subtypes, but also parameters like grain size, mineralogy, age and thickness where available. Previous global lithological maps or databases lacked detail for reported unconsolidated sediment areas or missed large areas, and reported a global coverage of 25 to 30%, considering the ice-free land area. Here, alluvial sediments cover about 23% of the mapped total ice-free area, followed by aeolian sediments (˜21%), glacial sediments (˜20%), and colluvial sediments (˜16%). A specific focus during the creation of the database was on the distribution of loess deposits, since loess is highly reactive and relevant to understand geochemical cycles related to dust deposition and weathering processes. An additional layer compiling pyroclastic sediment is added, which merges consolidated and unconsolidated pyroclastic sediments. The compilation shows latitudinal abundances of sediment types related to climate of the past. The GUM database is available at the PANGAEA database (https://doi.org/10.1594/PANGAEA.884822).

  6. Late Paleozoic sedimentation on the northern margin of the North China block: implications for regional tectonics and climate change

    Energy Technology Data Exchange (ETDEWEB)

    Cope, T.; Ritts, B.D.; Darby, B.J.; Fildani, A.; Graham, S.A.

    2005-03-01

    The Late Paleozoic collision between the North China continental block and the Altaid arc terranes of Mongolia represents one of the earliest and most fundamental tectonic events in the ongoing construction of Asia. New detrital zircon provenance data from Carboniferous-Permian nonmarine strata on the northern margin of North China imply that the northern margin of the North China block constituted a continental margin arc prior to this collision (-400-275 Ma) and that collision took place via south-directed subduction beneath North China. A significant and widespread climate change took place in North China in mid-Permian time, and is recorded by a change from Carboniferous and Lower Permian humid-climate, coal-bearing sedimentary facies to Upper Permian and Lower Triassic arid-climate redbeds. In northern North China, this climate change is accompanied by a paleocurrent reversal, which indicates the onset of uplift on the northern margin of the North China block. The temporal association of climate change and uplift suggests that aridification of North China may have been caused by a rainshadow effect from topography related to the convergence and ultimate collision between the North China block and the Altaid arc terranes of Mongolia. Alternatively, climate change may have occurred as a result of northward drift of the North China block through arid subtropical latitudes.

  7. Quantification of Sediment Transport During Glacier Surges and its Impact on Landform Architecture

    DEFF Research Database (Denmark)

    Kjær, Kurt H.; Schomacker, Anders; Korsgaard, Niels Jákup

    ) for 1945, prior to the last surge in 1964, and for 2003 in order to assess the effect of the surge on the sediment architecture in the forefield. The pre- and post-surge DEMs allow direct quantification of the sediment volumes that were re-distributed in the forefield by the surging ice mass in 1964...... or glaciofluvial outwash fans. Mapping of the sediment thickness in the glacier forefield shows higher accumulation along ice marginal positions related to wedge formation during extremely rapid ice flow. Fast flow was sustained by overpressurized water causing sediment-bedrock decoupling beneath a thick sediment...... architecture occurs distal to the 1810 ice margin, where the 1890 surge advanced over hitherto undeformed sediments. Proximal to the 1810 ice margin, the landscape have been transgressed by either one or two glaciers (in 1890 and 1964). The most complex landscape architecture is found proximal to the 1964 ice...

  8. Impact of beaver ponds on river discharge and sediment deposition along the Chevral River, Ardennes, Belgium

    Science.gov (United States)

    Nyssen, Jan; Frankl, Amaury; Pontzeele, Jolien; De Visscher, Maarten; Billi, Paolo

    2013-04-01

    With the recovery of the European beaver (Castor fiber) and their capacity to engineer fluvial landscapes, questions arise as to how they influence river discharge and sediment transport. The Chevral river (Ardennes, Belgium) contains two beaver dam sequences which appeared in 2004 and count now about 30 dams. Flow discharges and sediment fluxes were measured at the in- and outflow of each dam sequence. Volumes of sediment deposited behind the dams were measured. Between 2004 and 2011, peak flows were topped off, and the magnitude of extreme events decreased. 1710 m³ of sediment were deposited behind the beaver dams, with an average sediment thickness of 25 cm. The thickness of the sediment layer is related to the area of the beaver ponds. Along the stream, beaver pond sediment thickness displayed a sinusoidal deposition pattern, in which ponds with thick sediment layers were preceded by a series of ponds with thinner sediment layers. A downstream textural coarsening in the dam sequences was also observed, probably due to dam failures subsequent to surges. Differences in sediment flux between the in- and outflow at the beaver pond sequence were related to the river hydrograph, with deposition taking place during the rising limbs and slight erosion during the falling limbs. The seven-year-old sequences have filtered 190 tons of sediment out of the Chevral river, which is of the same order of magnitude as the 374 tons measured in pond deposits, with the difference between the values corresponding to beaver excavations (60 tons), inflow from small tributaries, and runoff from the valley flanks. Hydrogeomorphic effects of C. fiber and C. canadensis activity are similar in magnitude. The detailed analysis of changes to hydrology in beaver pond sequences confirms the potential of beavers to contribute to river and wetland restoration and catchment management.

  9. Legacy sediment storage in New England river valleys: anthropogenic processes in a postglacial landscape

    Science.gov (United States)

    Snyder, N. P.; Johnson, K. M.; Waltner, M.; Hopkins, A. J.; Dow, S.; Ames, E.; Merritts, D. J.; Walter, R. C.; Rahnis, M. A.

    2016-12-01

    Walter and Merritts (2008, and subsequent papers) show that legacy sediment associated with deposition in millponds is a common feature in river valleys of the Mid-Atlantic Piedmont region, with 1-5 m of fine sand and silt overlying Holocene soil and Pleistocene periglacial deposits. For this project, we seek to test the hypothesis that these field relationships are seen in New England, a formerly glaciated region with similar history and intensity of forest clearing and milldam construction during the 17-19th centuries. We study three watersheds, using field observations of bank stratigraphy, radiocarbon dating, and mapping of terraces and floodplains using lidar digital elevation models and other GIS datasets. The 68 km2 South River watershed in western Massachusetts exhibits the most extensive evidence for legacy sediment storage. We visited 17 historic dam sites in the watershed and found field evidence for fine sand and silt legacy sediment storage at 14, up to 2.2 m thick. In the 558 km2 Sheepscot River watershed in coastal Maine, we visited 12 historic dam sites, and found likely legacy sediment at six, up to 2.3 m thick. In the 171 km2 upper Charles River watershed in eastern Massachusetts, we investigated 14 dam sites, and found legacy sediment at two, up to 1.8 m thick. Stratigraphically, we identified the base of legacy sediment from a change in grain size to gravel at most sites, or to Pleistocene marine clay at some Sheepscot River sites. In the Sheepscot River, we observed cut timbers underlying historic sediment at several locations, likely associated with sawmill activities. Only at the Charles River were we able to radiocarbon date the underlying gravel (1281-1391 calibrated CE). At no site did we find a buried Holocene soil, in contrast to the field relations commonly observed in the Mid-Atlantic region. This may indicate that the New England sites have eroded to the pre-historic river bed, not floodplain surfaces. We attribute the variation in

  10. A Cambrian mixed carbonate-siliciclastic platform in SW Gondwana: evidence from the Western Sierras Pampeanas (Argentina) and implications for the early Paleozoic paleogeography of the proto-Andean margin

    Science.gov (United States)

    Ramacciotti, Carlos D.; Casquet, César; Baldo, Edgardo G.; Galindo, Carmen; Pankhurst, Robert J.; Verdecchia, Sebastián O.; Rapela, Carlos W.; Fanning, Mark

    2018-05-01

    The Western Sierras Pampeanas (WSP) of Argentina record a protracted geological history from the Mesoproterozoic assembly of the Rodinia supercontinent to the early Paleozoic tectonic evolution of SW Gondwana. Two well-known orogenies took place at the proto-Andean margin of Gondwana in the Cambrian and the Ordovician, i.e., the Pampean (545-520 Ma) and Famatinian (490-440 Ma) orogenies, respectively. Between them, an extensive continental platform was developed, where mixed carbonate-siliciclastic sedimentation occurred. This platform was later involved in the Famatinian orogeny when it underwent penetrative deformation and metamorphism. The platform apparently extended from Patagonia to northwestern Argentina and the Eastern Sierras Pampeanas, and has probable equivalents in SW Africa, Peru, and Bolivia. The WSP record the outer (deepest) part of the platform, where carbonates were deposited in addition to siliciclastic sediments. Detrital zircon U-Pb SHRIMP ages from clastic metasedimentary successions and Sr-isotope compositions of marbles from the WSP suggest depositional ages between ca. 525 and 490 Ma. The detrital zircon age patterns further suggest that clastic sedimentation took place in two stages. The first was sourced mainly from re-working of the underlying Neoproterozoic metasedimentary rocks and the uplifted core of the early Cambrian Pampean orogen, without input from the Paleoproterozoic Río de la Plata craton. Sediments of the second stage resulted from the erosion of the still emerged Pampean belt and the Neoproterozoic Brasiliano orogen in the NE with some contribution from the Río de la Plata craton. An important conclusion is that the WSP basement was already part of SW Gondwana in the early Cambrian, and not part of the exotic Precordillera/Cuyania terrane, as was previously thought.

  11. Radiological responses of different types of Egyptian Mediterranean coastal sediments

    Science.gov (United States)

    El-Gamal, A.; Rashad, M.; Ghatass, Z.

    2010-08-01

    The aim of this study was to identify gamma self-absorption correction factors for different types of Egyptian Mediterranean coastal sediments. Self-absorption corrections based on direct transmission through different thicknesses of the most dominant sediment species have been tested against point sources with gamma-ray energies of 241Am, 137Cs and 60Co with 2% uncertainties. Black sand samples from the Rashid branch of the Nile River quantitatively absorbed the low energy of 241Am through a thickness of 5 cm. In decreasing order of gamma energy self-absorption of 241Am, the samples under investigation ranked black sand, Matrouh sand, Sidi Gaber sand, shells, Salloum sand, and clay. Empirical self-absorption correction formulas were also deduced. Chemical analyses such as pH, CaCO 3, total dissolved solids, Ca 2+, Mg 2+, CO 32-, HCO 3- and total Fe 2+ have been carried out for the sediments. The relationships between self absorption corrections and the other chemical parameters of the sediments were also examined.

  12. Ancient aqueous sedimentation on Mars

    International Nuclear Information System (INIS)

    Goldspiel, J.M.; Squyres, S.W.

    1991-01-01

    Viking orbiter images are presently used to calculate approximate volumes for the inflow valleys of the ancient cratered terrain of Mars; a sediment-transport model is then used to conservatively estimate the amount of water required for the removal of this volume of debris from the valleys. The results obtained for four basins with well-developed inflow networks indicate basin sediment thicknesses of the order of tens to hundreds of meters. The calculations further suggest that the quantity of water required to transport the sediment is greater than that which could be produced by a single discharge of the associated aquifer, unless the material of the Martian highlands was very fine-grained and noncohesive to depths of hundreds of meters. 48 refs

  13. Geological analysis of paleozoic large-scale faulting in the south-central Pyrenees

    OpenAIRE

    Speksnijder, A.

    1986-01-01

    Detailed structural and sedimentological analysis reveals the existence of an east-west directed fundamental fault zone in the south-central Pyrenees, which has been intermittently active from (at least) the Devonian on. Emphasis is laid on the stUdy of fault-bounded post-Variscan (StephanoPermian) sedimentary basins, and the influence of Late Paleozoic faulting on the underlying Variscan basement. The present structure of the basement is rather complex as it results from multiple Variscan an...

  14. Change in morphology and modern sediment thickness on the inner continental shelf offshore of Fire Island, New York between 2011 and 2014: Analysis of hurricane impact

    Science.gov (United States)

    Schwab, William C.; Baldwin, Wayne E.; Warner, John C.; List, Jeffrey; Denny, Jane F.; Liste Munoz, Maria; Safak, Ilgar

    2017-01-01

    Seafloor mapping investigations conducted on the lower shoreface and inner continental shelf offshore of Fire Island, New York in 2011 and 2014, the period encompassing the impacts of Hurricanes Irene and Sandy, provide an unprecedented perspective regarding regional inner continental shelf sediment dynamics during large storm events. Analyses of these studies demonstrate that storm-induced erosion and sediment transport occurred throughout the study area in water depths up to 30 m. Acoustic backscatter patterns were observed to move from ~1 m to 450 m with a mean of 20 m and movement tended to decrease with increasing water depth. These patterns indicate that both of the primary inner continental shelf sedimentary features in the study area, linear sorted bedforms offshore of eastern Fire Island and shoreface-attached sand ridges offshore of central and western Fire island, migrated alongshore to the southwest. The migration of the sorted bedforms represents the modification of an active ravinement surface and is thought to have liberated a significant volume of sediment. Comparison of isopach maps of sediment thickness show that the volume of modern sediment composing the lower shoreface and shoreface-attached sand ridges decreased by ~2.8 × 106 m3 across the ~73 km2 of common seafloor mapped in both surveys. However, a similar analysis for the relatively calmer 15-yr period prior to 2011 revealed significant accretion. This allows speculation that the shoreface-attached sand ridges are maintained over decadal timescales via sediment supplied through erosion of Pleistocene outwash and lower Holocene transgressive channel-fill deposits exposed on the inner continental shelf, but that the sand ridges also periodically erode and move to the southwest during large storm events. Analyses show that significant storminduced erosion and sediment transport occurs far seaward of the 5 to 9 m depth of closure assumed for Fire Island, where it is thought that an onshore

  15. Hierarchy of sedimentary discontinuity surfaces and condensed beds from the middle Paleozoic of eastern North America: Implications for cratonic sequence stratigraphy

    Science.gov (United States)

    McLaughlin, P.I.; Brett, Carlton E.; Wilson, M.A.

    2008-01-01

    Sedimentological analyses of middle Paleozoic epeiric sea successions in North America suggest a hierarchy of discontinuity surfaces and condensed beds of increasing complexity. Simple firmgrounds and hardgrounds, which are comparatively ephemeral features, form the base of the hierarchy. Composite hardgrounds, reworked concretions, authigenic mineral crusts and monomictic intraformational conglomerates indicate more complex histories. Polymictic intraformational conglomerates, ironstones and phosphorites form the most complex discontinuity surfaces and condensed beds. Complexity of discontinuities is closely linked to depositional environments duration of sediment starvation and degree of reworking which in turn show a relationship to stratigraphic cyclicity. A model of cratonic sequence stratigraphy is generated by combining data on the complexity and lateral distribution of discontinuities in the context of facies successions. Lowstand, early transgressive and late transgressive systems tracts are representative of sea-level rise. Early and late transgressive systems tracts are separated by the maximum starvation surface (typically a polymictic intraformational conglomerate or condensed phosphorite), deposited during the peak rate of sea-level rise. Conversely the maximum flooding surface, representing the highest stand of sea level, is marked by little to no break in sedimentation. The highstand and falling stage systems tracts are deposited during relative sea-level fall. They are separated by the forced-regression surface, a thin discontinuity surface or condensed bed developed during the most rapid rate of sea-level fall. The lowest stand of sea level is marked by the sequence boundary. In subaerially exposed areas it is occasionally modified as a rockground or composite hardground.

  16. The Chara-Sina dyke swarm in the structure of the Middle Paleozoic Vilyui rift system (Siberian Craton)

    Science.gov (United States)

    Kiselev, A. I.; Konstantinov, K. M.; Yarmolyuk, V. V.; Ivanov, A. V.

    2016-11-01

    The formation of the Vilyui rift system in the eastern Siberian Craton was finished with breakdown of the continent and formation of its eastern margin. A characteristic feature of this rift system is the radial distribution of dyke swarms of basic rocks. This peculiarity allows us to relate it to the breaking processes above the mantle plume, the center of which was located in the region overlain in the modern structure by the foreland of the Verkhoyan folded-thrust belt. The Chara-Sina dyke swarm is the southern part of a large area of Middle Paleozoic basaltic magmatism in the eastern Siberian Craton. The OIB-like geochemical characteristics of dolerite allow us to suggest that the melting substrate for Middle Paleozoic basaltic magmatism was represented by a relatively homogeneous, mid-depleted mantle of the plume with geochemical parameters similar to those of OIB.

  17. Pollutants' Release, Redistribution and Remediation of Black Smelly River Sediment Based on Re-Suspension and Deep Aeration of Sediment.

    Science.gov (United States)

    Zhu, Lin; Li, Xun; Zhang, Chen; Duan, Zengqiang

    2017-04-01

    Heavily polluted sediment is becoming an important part of water pollution, and this situation is particularly acute in developing countries. Sediment has gradually changed from being the pollution adsorbent to the release source and has influenced the water environment and public health. In this study, we evaluated the pollutant distribution in sediment in a heavily polluted river and agitated the sediment in a heavily polluted river to re-suspend it and re-release pollutants. We found that the levels of chemical oxygen demand (COD), NH₄⁺-N, total nitrogen (TN), and total phosphorus (TP) in overlying water were significantly increased 60 min after agitation. The distribution of the pollutants in the sediment present high concentrations of pollutants congregated on top of the sediment after re-settling, and their distribution decreased with depth. Before agitation, the pollutants were randomly distributed throughout the sediment. Secondly, deep sediment aeration equipment (a micro-porous air diffuser) was installed during the process of sedimentation to study the remediation of the sediment by continuous aeration. The results revealed that deep sediment aeration after re-suspension significantly promoted the degradation of the pollutants both in overlying water and sediment, which also reduced the thickness of the sediment from 0.9 m to 0.6 m. Therefore, sediment aeration after suspension was efficient, and is a promising method for sediment remediation applications.

  18. Geophysical characterization of contaminated muddy sediments

    International Nuclear Information System (INIS)

    McDermott, I. R.; English, G. E.

    1997-01-01

    A non-intrusive, seismic subbottom profile survey of pond sediments was conducted on a former U.S.Naval Facility at Argentia, Newfoundland, to characterize the nature and extent of contamination. An IKB Seistec boomer was used in conjunction with C-CORE's HI-DAPT digital data acquisition and processing system and differential GPS system. The survey was successful in locating regions of soft muddy sediments and in determining the thickness of these deposits. Subsurface buried objects, which are potential sources of pollution, were also identified. Intrusive profiling of the sediment was done with a new tool, the Soil Stiffness Probe, which combines two geophysical measurement systems to determine bulk density and shear stiffness. The muddy sediments were found to be highly 'fluidized', indicating that they could be easily removed with a suction dredge. 4 refs., 5 figs

  19. Tracer investigations of natural and polluted sea sediment movement

    International Nuclear Information System (INIS)

    Pruszak, Z.

    1994-01-01

    Results of tracer investigations and bottom sediment movement analysis (natural and polluted) performed world-wide have been shown. Polish investigations have been compared to these results. A critical estimation and analysis of particular elements of sediment movement: thickness of the drag layer and various characteristics of bottom transport evaluated in different time-space scales has been performed. 14 refs, 9 figs

  20. Sediment transport following water transfer from Yangtze River to Taihu Basin

    Directory of Open Access Journals (Sweden)

    Zheng Gong

    2011-12-01

    Full Text Available To meet the increasing need of fresh water and to improve the water quality of Taihu Lake, water transfer from the Yangtze River was initiated in 2002. This study was performed to investigate the sediment distribution along the river course following water transfer. A rainfall-runoff model was first built to calculate the runoff of the Taihu Basin in 2003. Then, the flow patterns of river networks were simulated using a one-dimensional river network hydrodynamic model. Based on the boundary conditions of the flow in tributaries of the Wangyu River and the water level in Taihu Lake, a one-dimensional hydrodynamic and sediment transport numerical model of the Wangyu River was built to analyze the influences of the inflow rate of the water transfer and the suspended sediment concentration (SSC of inflow on the sediment transport. The results show that the water transfer inflow rate and SSC of inflow have significant effects on the sediment distribution. The higher the inflow rate or SSC of inflow is, the higher the SSC value is at certain cross-sections along the river course of water transfer. Higher inflow rate and SSC of inflow contribute to higher sediment deposition per kilometer and sediment thickness. It is also concluded that a sharp decrease of the inflow velocity at the entrance of the Wangyu River on the river course of water transfer induces intense sedimentation at the cross-section near the Changshu hydro-junction. With an increasing distance from the Changshu hydro-junction, the sediment deposition and sedimentation thickness decrease gradually along the river course.

  1. Radiological responses of different types of Egyptian Mediterranean coastal sediments

    Energy Technology Data Exchange (ETDEWEB)

    El-Gamal, A., E-mail: ayman_elgamal@yahoo.co [Department of Oceanography, Coastal Research Institute, National Water Research Center, 15 Elpharaana St., Elshallalat, Postal code 21514, Alexandria (Egypt); Rashad, M. [Land and Water Technologies Department, Arid Land Cultivation and Development Research Institute, Mubarak City for Scientific Research, Burg El-Arab, Alexandria (Egypt); Ghatass, Z. [Department of Environmental Studies, Institute of Graduate Studies and Research, Alexandria University, Alexandria (Egypt)

    2010-08-15

    The aim of this study was to identify gamma self-absorption correction factors for different types of Egyptian Mediterranean coastal sediments. Self-absorption corrections based on direct transmission through different thicknesses of the most dominant sediment species have been tested against point sources with gamma-ray energies of {sup 241}Am, {sup 137}Cs and {sup 60}Co with 2% uncertainties. Black sand samples from the Rashid branch of the Nile River quantitatively absorbed the low energy of {sup 241}Am through a thickness of 5 cm. In decreasing order of gamma energy self-absorption of {sup 241}Am, the samples under investigation ranked black sand, Matrouh sand, Sidi Gaber sand, shells, Salloum sand, and clay. Empirical self-absorption correction formulas were also deduced. Chemical analyses such as pH, CaCO{sub 3}, total dissolved solids, Ca{sup 2+}, Mg{sup 2+}, CO{sub 3}{sup 2-}, HCO{sub 3}{sup -} and total Fe{sup 2+} have been carried out for the sediments. The relationships between self absorption corrections and the other chemical parameters of the sediments were also examined.

  2. Preliminary results of sedimentation study in SMART, Kg. Berembang holding pond

    International Nuclear Information System (INIS)

    Jeremy Andy Dominic; Wan Zakaria Wan Md Tahir; Lakam Mejus; Juhari Mohd Yusuf; Kamaruzaman Mohamad; Mod Omar Hassan

    2010-01-01

    Full text: Spatial variations of the sediment bulk density profile in the Storm water Management And Road Tunnel (SMART) holding pond were measured at every 20 metre intervals along six cross section lines with a total of 72 sampling points using a Cs-137 nuclear backscatter probe. The bulk density profile at each sampling points were vertically measured at every 2 inches increment in an upward direction. The thickness of the deposited sediment varies spatially with a gradual increase towards the centre of the holding pond. The highest sediment deposition areas are located near the baffle walls, the centre and the south east corner of the holding pond. The maximum thickness of the deposited sediment adjacent to the baffle walls is 22 inch and at both the centre and south east area are 18 inch. The sediment bulk density profile varies from 1,010 kg.m -3 to 1,400 kg.m -3 . Spatial density variations are in correlation with the active and inactive zone in the pond area. The potential of sediment deposition and consolidation process is higher in the inactive zone compare to the active zone, therefore the bulk density value the inactive zone is much higher. (author)

  3. Oil, gas potential in shallow water: Peru`s continental shelf basins

    Energy Technology Data Exchange (ETDEWEB)

    Zuniga-Rivero, F.; Keeling, J.A.; Hay-Roe, H. [BPZ and Associates Inc., Houston, TX (United States)

    1998-11-16

    This third article of a series highlights the three sedimentary basins that underlie the 16 million acres of continental shelf adjacent to a 650-mile stretch of Peruvian coastline. This area lies roughly between the ports of Chiclayo and Pisco. These basins offer a variety of reservoirs, traps, and source-rock potential in water depths of less than 1,000 ft. They are characterized by a thick sequence of Neogene strata, underlain by Paleogene, Mesozoic, and Upper Paleozoic sediments down to as much as 7 sec two-way time on modern seismic records. In some places the sedimentary section may reach an aggregate thickness in excess of 50,000 ft. From north to south these contiguous shelf basins are the Sechura-Salaverry, Huacho, and Pisco basins. All three basins are described.

  4. Characteristics of core sampling from crumbing Paleozoic rock

    Energy Technology Data Exchange (ETDEWEB)

    Barabashkin, I I; Edelman, Y A; Filippov, V N; Lychev, V N

    1981-01-01

    The results of analysis of core sampling using standard core sampling tools with small and medium inside diameter are cited. It is demonstrated that when using these tools loss of core in Paleozoic deposits promising with regard to oil and gas content does not exceed 25 - 30%. The use of a new core sampling tool with a large inside diameter which includes drill bits of different types and a core lifter ''Krembriy'' SKU-172/100 made it possible to increase core removal approximately 52%. A representative core from a highly crumbling and vesicular rock belinging to groups III - IV in terms of difficulty of core sampling was obtained first. A description of a new core sampling tool is given. The characteristics of the technology of its use which promote preservation of the core are cited. Means of continued improvement of this tool are noted.

  5. Stratigraphy of Slick Rock district and vicinity, San Miguel and Dolores Counties, Colorado

    Science.gov (United States)

    Shawe, Daniel R.; Simmons, George C.; Archbold, Norbert L.

    1968-01-01

    The Slick Rock district covers about 570 square miles in western San Miguel and Dolores Counties, in southwestern Colorado. It is at the south edge of the salt-anticline region of southwestern Colorado and southeastern Utah and of the Uravan mineral belt.Deposition of Paleozoic sedimentary rocks in the district and vicinity was principally controlled by development of the Paradox Basin, and of Mesozoic rocks by development of a depositional basin farther west. The Paleozoic rocks generally are thickest at the northeast side of the Paradox Basin in a northwest- trending trough which seems to be a wide graben in Precambrian igneous and metamorphic basement rocks; Mesozoic rocks generally thicken westward and southwestward from the district.Sedimentary rocks rest on a Precambrian basement consisting of a variety of rocks, including granite and amphibolite. The surface of the Precambrian rocks is irregular and generally more than 2,000 feet below sea level and 7,000-11,000 feet below the ground surface. In the northern part of the district the Precambrian surface plunges abruptly northeastward into the trough occupying the northeast side of the Paradox Basin, and in the southern part it sags in a narrow northeasterly oriented trough. Deepening of both troughs, or crustal deformation in their vicinity, influenced sedimentation during much of late Paleozoic and Mesozoic time.The maximum total thickness of sedimentary rocks underlying the district is 13,000 feet, and prior to extensive erosion in the late Tertiary and the Quaternary it may have been as much as about 18,000 feet. The lower 5,000 feet or more of the sequence of sedimentary rocks consists of arenaceous strata of early Paleozoic age overlain by dominantly marine carbonate rocks and evaporite beds interbedded with lesser amounts of clastic sediments of late Paleozoic age. Overlying these rocks is about 4,500 feet of terrestrial clastic sediments, dominantly sandstone with lesser amounts of shale, mudstone

  6. Geological significance of paleo-aulacogen and exploration potential of reef flat gas reservoirs in the Western Sichuan Depression

    Directory of Open Access Journals (Sweden)

    Shu Liu

    2015-11-01

    Full Text Available Confirming thick hydrocarbon generation center and discovering thick porous reservoirs are two key factors to start the Permian gas exploration of the Western Sichuan Depression. In this paper, the Sinian-Cambrian structures of this area were studied by adopting the layer-flattening technology and the Lower Paleozoic thickness map was prepared in order to describe the Permian hydrocarbon generation center. Then, combined with seismic facies analysis and field outcrop bioherm discovery, the distribution of Middle Permian reef flat reservoirs were predicted. Finally, the favorable conditions for reef flat reservoir dolomitization were analyzed based on fault features. The study indicates that: (1 Sinian top represents a huge depression in the profile flatted by the reflecting interface of Permian bottom, with normal faults filled by thick Lower Paleozoic sediments at both sides, revealing that a aulacogen formed during the Khanka taphrogeny exists in the Western Sichuan Depression, where very thick Cambrian strata may contain hydrocarbon generation center, making Permian strata have the material conditions for the formation of large gas pools; (2 the Middle Permian strata in the Western Sichuan Depression exhibit obvious abnormal response in reef flat facies, where three large abnormal bands are developed, which are predicted as bioherm complex combined with the Middle Permian bioherm outcrop discoveries in surface; and (3 deep and large extensional faults are developed in reef flat margin, manifesting as favorable conditions for the development of dolomite reservoirs. The results show that the Middle Permian traps in the Western Sichuan Depression contain resources up to 7400 × 108 m3, showing significant natural gas exploration prospects. By far, one risk exploration well has been deployed.

  7. Sediment accumulation rate and radiological characterisation of the sediment of Palmones River estuary (southern of Spain)

    International Nuclear Information System (INIS)

    Rubio, L.; Linares-Rueda, A.; Duenas, C.; Fernandez, M.C.; Clavero, V.; Niell, F.X.; Fernandez, J.A.

    2003-01-01

    Chemical analyses and radioecological methods were combined in order to estimate the sediment accumulation rate in the upper 20 cm depth of the Palmones River estuary. Organic matter, total carbon, C:N and 137 Cs vertical profiles showed changes at 13 cm depth. These changes could be associated with the decrease in river input since 1987 when a dam situated in the upper part of the estuary started to store water. Using 1987 as reference to date the sediment, accumulation rate was 1.2 cm yr -1 . As alternative method, two layer model of 210 Pb xs vertical distribution showed a sedimentation rate of 0.7 cm yr -1 with a surface mixing layer of 7 cm thickness. The high ammonium, potassium and sodium content in pore water and the strong correlation between 137 Cs activities and organic matter in dry sediment suggests that 137 Cs (the only anthropogenic product detected) is mainly accumulated in the estuary associated with the particulate organic material from the catchment area

  8. Soil Erosion and Sediment Yield Modelling in the Pra River Basin of ...

    African Journals Online (AJOL)

    kusimi

    sediment delivery ratio; soil erosion modelling; sediment yield modelling. .... The basin falls within the wet semi-equitorial climatic belt which is ... influence of the moist south-west monsoons during the rainy season, with high .... availability of good satellite images covering the study area; because of thick cloud cover most.

  9. Effect of Gas Velocity on the Dust Sediment Layer in the Coupled Field of Corona Plasma and Cyclone

    International Nuclear Information System (INIS)

    Wei Mingshan; Ma Chaochen; Li Minghua; Danish, S N

    2006-01-01

    A dust sediment layer was found on the outer tube wall when the ESCP (electrostatic centrifugal precipitator) trapped diesel particulates or ganister sand. The Compton back scatter method was used to measure the sediment thickness during the experiment. The effect of the inlet gas velocity on the dust sediment layer was investigated. PIV (Particle Image Velocimetry) was used to measure the velocity field between the inner barb tube wall and the outer tube wall. Experiments showed that the thickness of the sediment increased with time, and the sediment layer at the lower end was much thicker than that at the upper end. The agglomeration on the outer tube wall could be removed when the inlet gas velocity was increased to a certain value

  10. Enhanced electroforced sedimentation of various solid- liquid systems

    African Journals Online (AJOL)

    GREGORY

    2011-12-16

    Dec 16, 2011 ... Application of electric field, to enhance the separation, is one of the techniques .... the material; Ce the modified consolidation coefficient and θ time. ... sedimentation of thick clay suspensions in consolidation region. Chemical ...

  11. Global Paleobathymetry Reconstruction with Realistic Shelf-Slope and Sediment Wedge

    Science.gov (United States)

    Goswami, A.; Hinnov, L. A.; Gnanadesikan, A.; Olson, P.

    2013-12-01

    We present paleo-ocean bathymetry reconstructions in a 0.1°x0.1° resolution, using simple geophysical models (Plate Model Equation for oceanic lithosphere), published ages of the ocean floor (Müller et al. 2008), and modern world sediment thickness data (Divins 2003). The motivation is to create realistic paleobathymetry to understand the effect of ocean floor roughness on tides and heat transport in paleoclimate simulations. The values for the parameters in the Plate Model Equation are deduced from Crosby et al. (2006) and are used together with ocean floor age to model Depth to Basement. On top of the Depth to Basement, we added an isostatically adjusted multilayer sediment layer, as indicated from sediment thickness data of the modern oceans and marginal seas (Divins 2003). We also created another version of the sediment layer from the Müller et al. dataset. The Depth to Basement with the appropriate sediment layer together represent a realistic paleobathymetry. A Sediment Wedge was modeled to complement the reconstructed paleobathymetry by extending it to the coastlines. In this process we added a modeled Continental Shelf and Continental Slope to match the extent of the reconstructed paleobathymetry. The Sediment Wedge was prepared by studying the modern ocean where a complete history of seafloor spreading is preserved (north, south and central Atlantic Ocean, Southern Ocean between Australia-Antarctica, and the Pacific Ocean off the west coast of South America). The model takes into account the modern continental shelf-slope structure (as evident from ETOPO1/ETOPO5), tectonic margin type (active vs. passive margin) and age of the latest tectonic activity (USGS & CGMW). Once the complete ocean bathymetry is modeled, we combine it with PALEOMAP (Scotese, 2011) continental reconstructions to produce global paleoworld elevation-bathymetry maps. Modern time (00 Ma) was assumed as a test case. Using the above-described methodology we reconstructed modern ocean

  12. Total petroleum systems of the Paleozoic and Jurassic, Greater Ghawar Uplift and adjoining provinces of central Saudi Arabia and northern Arabian-Persian Gulf

    Science.gov (United States)

    Pollastro, Richard M.

    2003-01-01

    The greater Paleozoic and Jurassic petroleum systems of the Arabian Peninsula form two of the most prolific petroleum-producing systems in the world. Source rocks of these systems extend throughout the eastern Arabian Peninsula and Arabian-Persian Gulf. Primary elements of these Paleozoic and Jurassic petroleum systems - source, reservoir, and seal rocks - are of great areal extent and exceptional quality. The combination of these regionally extensive, exceptional petroleum-system elements, and the formation of large subtle structural closures prior to, or coincident with, peak oil generation and migration, have produced oil and gas fields with reserve volumes second to none.

  13. Thick sedimentary sequence around Bahraich in the northern part of the central Ganga foreland basin

    Science.gov (United States)

    Manglik, A.; Adilakshmi, L.; Suresh, M.; Thiagarajan, S.

    2015-06-01

    We present the results of a magnetotelluric study along a 285 km long profile between Hamirpur and Rupadia (Nepal border) across the central Ganga basin. The electrical resistivity image obtained by combining 1-D Occam inversion models for 39 sites reveals a significant contrast in the subsurface structure from south to north along the profile. At the southern end, the Bundelkhand massif is delineated as a high resistivity block buried beneath 250-300 m thick sediments. The thickness of sediments gradually increases to about 500-600 m at Kanpur, and to about 1.2 km at Lucknow. Here, the basement depth increases to more than 2.5 km within a profile distance of 20 km, which could be attributed to the Lucknow fault. The underlying rocks also have moderate resistivity and possibly represent the Vindhyans. The sedimentary sequence at the northern end of the profile around Bahraich is more than 9 km thick. Integrating the resistivity image with a published seismic velocity structure from the region and the lithology from the 3927 m deep Matera-I well reveals that the top 4 km succession is constituted of highly conductive Oligocene and younger rocks of the Matera Formation and the Siwaliks, and recent sediments whereas the underlying > 5 km section is composed of sedimentary rocks of the Bahraich Group overlying the Archean basement. The high conductivity of sediments in conjunction with the low seismic velocity and large Vp/Vs obtained by receiver function analysis implies poor consolidation of sediments and thus high seismic hazard potential. The present results have implications for hydrocarbon exploration, hazard potential scenario of the central Ganga basin, and flexural strength of the Indian Plate.

  14. Chemical and isotopic characterisation and sedimentation rates in Princess Charlotte Bay, Queensland

    International Nuclear Information System (INIS)

    Torgersen, T.; Chivas, A.R.; Chapman, A.

    1983-01-01

    Sedimentation rates in Princess Charlotte Bay are in the range 2.3-6.1 mm/yr, with mixed layers up to 10 cm thick, as determined by the 210 Pb method. 137 Cs determinations of sedimentation rate are not in disagreement, but are likely to yield ambiguous results in the Great Barrier Reef Province, because of diffusive redistribution, owing to the low distribution coefficient, K/sub D/ = 420-800, measured in lagoonal sediments

  15. Delayed fungal evolution did not cause the Paleozoic peak in coal production.

    Science.gov (United States)

    Nelsen, Matthew P; DiMichele, William A; Peters, Shanan E; Boyce, C Kevin

    2016-03-01

    Organic carbon burial plays a critical role in Earth systems, influencing atmospheric O2 and CO2 concentrations and, thereby, climate. The Carboniferous Period of the Paleozoic is so named for massive, widespread coal deposits. A widely accepted explanation for this peak in coal production is a temporal lag between the evolution of abundant lignin production in woody plants and the subsequent evolution of lignin-degrading Agaricomycetes fungi, resulting in a period when vast amounts of lignin-rich plant material accumulated. Here, we reject this evolutionary lag hypothesis, based on assessment of phylogenomic, geochemical, paleontological, and stratigraphic evidence. Lignin-degrading Agaricomycetes may have been present before the Carboniferous, and lignin degradation was likely never restricted to them and their class II peroxidases, because lignin modification is known to occur via other enzymatic mechanisms in other fungal and bacterial lineages. Furthermore, a large proportion of Carboniferous coal horizons are dominated by unlignified lycopsid periderm with equivalent coal accumulation rates continuing through several transitions between floral dominance by lignin-poor lycopsids and lignin-rich tree ferns and seed plants. Thus, biochemical composition had little relevance to coal accumulation. Throughout the fossil record, evidence of decay is pervasive in all organic matter exposed subaerially during deposition, and high coal accumulation rates have continued to the present wherever environmental conditions permit. Rather than a consequence of a temporal decoupling of evolutionary innovations between fungi and plants, Paleozoic coal abundance was likely the result of a unique combination of everwet tropical conditions and extensive depositional systems during the assembly of Pangea.

  16. Geophysical constraints on Rio Grande rift structure and stratigraphy from magnetotelluric models and borehole resistivity logs, northern New Mexico

    Science.gov (United States)

    Rodriguez, Brian D.; Sawyer, David A.; Hudson, Mark R.; Grauch, V.J.S.

    2013-01-01

    Two- and three-dimensional electrical resistivity models derived from the magnetotelluric method were interpreted to provide more accurate hydrogeologic parameters for the Albuquerque and Española Basins. Analysis and interpretation of the resistivity models are aided by regional borehole resistivity data. Examination of the magnetotelluric response of hypothetical stratigraphic cases using resistivity characterizations from the borehole data elucidates two scenarios where the magnetotelluric method provides the strongest constraints. In the first scenario, the magnetotelluric method constrains the thickness of extensive volcanic cover, the underlying thickness of coarser-grained facies of buried Santa Fe Group sediments, and the depth to Precambrian basement or overlying Pennsylvanian limestones. In the second scenario, in the absence of volcanic cover, the magnetotelluric method constrains the thickness of coarser-grained facies of buried Santa Fe Group sediments and the depth to Precambrian basement or overlying Pennsylvanian limestones. Magnetotelluric surveys provide additional constraints on the relative positions of basement rocks and the thicknesses of Paleozoic, Mesozoic, and Tertiary sedimentary rocks in the region of the Albuquerque and Española Basins. The northern extent of a basement high beneath the Cerros del Rio volcanic field is delineated. Our results also reveal that the largest offset of the Hubbell Spring fault zone is located 5 km west of the exposed scarp. By correlating our resistivity models with surface geology and the deeper stratigraphic horizons using deep well log data, we are able to identify which of the resistivity variations in the upper 2 km belong to the upper Santa Fe Group sediment

  17. The early quaternary sediments above the Gorleben salt dome

    International Nuclear Information System (INIS)

    Mueller, H.

    1986-01-01

    About 1500 borehole samples from the 90 m thick pre-Elsterian Pleistocene sediments above the Gorleben salt dome were studied to establish the palynostratigraphy of the main part of the still poorly known 'Cromerian Complex'. With the exception of two isolated sink holes above the gypsum cap rock, which developed during the early Bavelian, the investigated pre-Elsterian Pleistocene sediments were deposited in a very shallow lake, similar to the present-day Steinhuder Meer (NW Germany). Therefore, subrosion (subsurface erosion of salt) and sedimentation kept pace with each other during this time interval. Small discordances - similar to those in the Holocene sediments of the Steinhuder Meer - are frequent, but do not hamper the close correlation (to within 1 cm) between the different boreholes. (orig.) [de

  18. The early quaternary sediments above the Gorleben salt dome

    International Nuclear Information System (INIS)

    Mueller, H.

    1986-01-01

    About 1500 borehole samples from the 90 m thick pre-Elsterian Pleistocene sediments above the Gorleben salt dome were studied to establish the palynostratigraphy of the main part of the still poorly known 'Cromerian Complex'. With the exception of two isolated sink holes above the gypsum cap rock, which developed during the early Bavelian, the investigated pre-Elsterian Pleistocene sediments were deposited in a very shallow lake, similar to the present-day Steinhuder Meer (NW Germany). Therefore, subrosion (subsurface erosion of salt) and sedimentation kept pace with each other during this time interval. Small discordances - similar to those in the Holocene sediments of the Steinhuder Meer - are frequent, but do not hamper the close correlation (to within 1 cm) between the different boreholes. (orig./PW) [de

  19. Equilibrium sampling for a thermodynamic assessment of contaminated sediments

    DEFF Research Database (Denmark)

    Mayer, Philipp; Nørgaard Schmidt, Stine; Mäenpää, Kimmo

    Hydrophobic organic contaminants (HOCs) reaching the aquatic environment are largely stored in sediments. The risk of contaminated sediments is challenging to assess since traditional exhaustive extraction methods yield total HOC concentrations, whereas freely dissolved concentrations (Cfree......) govern diffusive uptake and partitioning. Equilibrium sampling of sediment was introduced 15 years ago to measure Cfree, and it has since developed into a straightforward, precise and sensitive approach for determining Cfree and other exposure parameters that allow for thermodynamic assessment...... of polluted sediments. Glass jars with µm-thin silicone coatings on the inner walls can be used for ex situ equilibration while a device housing several silicone-coated fibers can be used for in situ equilibration. In both cases, parallel sampling with varying silicone thicknesses can be applied to confirm...

  20. Geochemistry and chronology of the early Paleozoic diorites and granites in the Huangtupo volcanogenic massive sulfide (VMS) deposit, Eastern Tianshan, NW China: Implications for petrogenesis and geodynamic setting

    Science.gov (United States)

    Zheng, Jiahao; Chai, Fengmei; Feng, Wanyi; Yang, Fuquan; Shen, Ping

    2018-03-01

    The Eastern Tianshan orogen contains many late Paleozoic porphyry Cu and magmatic Cu-Ni deposits. Recent studies demonstrate that several early Paleozoic volcanogenic massive sulfide (VMS) Cu-polymetallic and porphyry Cu deposits were discovered in the northern part of Eastern Tianshan. This study presents zircon U-Pb, whole-rock geochemical, and Sr-Nd isotopic data for granites and diorites from the Huangtupo VMS Cu-Zn deposit, northern part of the Eastern Tianshan. Our results can provide constraints on the genesis of intermediate and felsic intrusions as well as early Paleozoic geodynamic setting of the northern part of Eastern Tianshan. LA-ICP-MS zircon U-Pb analyses suggest that the granites and diorites were formed at 435 ± 2 Ma and 440 ± 2 Ma, respectively. Geochemical characteristics suggest that the Huangtupo granites and diorites are metaluminous rocks, exhibiting typical subduction-related features such as enrichment in LILE and LREE and depletion in HFSE. The diorites have moderate Mg#, positive εNd(t) values (+6.4 to +7.3), and young Nd model ages, indicative of a depleted mantle origin. The granites exhibit mineral assemblages and geochemical characteristics of I-type granites, and they have positive εNd(t) values (+6.7 to +10.2) and young Nd model ages, suggesting a juvenile crust origin. The early Paleozoic VMS Cu-polymetallic and porphyry Cu deposits in the northern part of Eastern Tianshan were genetically related. The formation of the early Paleozoic magmatic rocks as well as VMS and porphyry Cu deposits in the northern part of Eastern Tianshan was due to a southward subduction of the Junggar oceanic plate.

  1. The Late Paleozoic relative gas fields of coal measure in China and their significances on the natural gas industry

    Directory of Open Access Journals (Sweden)

    Chenchen Fang

    2016-12-01

    Full Text Available The coal measure gas sources of coal-derived gas fields in the Late Paleozoic China are the Lower Carboniferous Dishuiquan Formation, the Upper Carboniferous Batamayineishan Formation and Benxi Formation, the Lower Permian Taiyuan Formation and Shanxi Formation, and the Upper Permian Longtan Formation. The coal-derived gas accumulates in Ordovician, Carboniferous, Permian, and Paleocene reservoirs and are distributed in Ordos Basin, Bohai Bay Basin, Junggar Basin, and Sichuan Basin. There are 16 gas fields and 12 of them are large gas fields such as the Sulige large gas field which is China's largest reserve with the highest annual output. According to component and alkane carbon isotope data of 99 gas samples, they are distinguished to be coal-derived gas from coal-derived gas with δ13C2 > −28.5‰ and δ13C1 -δ13C2 -δ13C3 identification chart. The Late Paleozoic relative gas fields of coal measure are significant for the Chinese natural gas industry: proven natural gas geological reserves and annual output of them account for 1/3 in China, and the gas source of three significant large gas fields is coal-derived, which of five significant large gas fields supporting China to be a great gas producing country. The average reserves of the gas fields and the large gas fields formed from the late Paleozoic coal measure are 5.3 and 1.7 times that of the gas fields and the large gas fields in China.

  2. Early Paleozoic tectonic reactivation of the Shaoxing-Jiangshan fault zone: Structural and geochronological constraints from the Chencai domain, South China

    Science.gov (United States)

    Sun, Hanshen; Li, Jianhua; Zhang, Yueqiao; Dong, Shuwen; Xin, Yujia; Yu, Yingqi

    2018-05-01

    The Shaoxing-Jiangshan fault zone (SJFZ), as a fundamental Neoproterozoic block boundary that separates the Yangtze Block from the Cathaysia Block, is the key to understanding the evolution of South China from Neoproterozoic block amalgamation to early Paleozoic crustal reworking. New structural observations coupled with geochronological ages from the Chencai domain indicate that intense ductile deformation and metamorphism along the SJFZ occurred at ∼460-420 Ma, in response to the early Paleozoic orogeny in South China. To the east of the SJFZ, the deformation involves widespread generations of NE-striking foliation, intrafolial folds, and local development of sinistral-oblique shear zones. The shearing deformation occurred under amphibolite facies conditions at temperatures of >550 °C (locally even >650 °C). To the west of the SJFZ, the deformation corresponds to sinistral-oblique shearing along NE-striking, steep-dipping zones under greenschist facies conditions at temperatures of 400-500 °C. These deformation styles, as typical mid-crustal expressions of continental reworking, reflect tectonic reactivation of the pre-existing, deeply rooted Neoproterozoic block boundary in the early Paleozoic. We infer that the tectonic reactivation, possibly induced by oblique underthrusting of north Cathaysia, facilitated ductile shearing and burial metamorphic reactions, giving rise to the high-strain zones and high-grade metamorphic rocks. With respect to pre-existing mechanical weakness, our work highlights the role of tectonic reactivation of early structures in localizing later deformation before it propagates into yet undeformed domains.

  3. Geochemical distribution and fate of arsenic in water and sediments of rivers from the Hokusetsu area, Japan

    Directory of Open Access Journals (Sweden)

    Emilie Even

    2017-02-01

    New hydrological insights for the region: The geochemical mapping showed that As in river water exceeded the maximum limit concentration of 10 ppb in several places. The highest As levels (waters and sediments correlated well with the surface geologies, concentrating in a halo around granitic intrusion and nearby faults. The isotopic analysis of sulfur revealed the occurrence of two kinds of sulfide mineralizations responsible for As contamination: one from Late Paleozoic submarine volcanism in sedimentary rocks, and one from Late Cretaceous igneous activities in contact-metamorphosed rocks disseminated with sulfides. The transport of As along river courses occurred mainly as a dissolved species rather than absorbed on Fe/Mn/Al particles, signifying the least role of iron oxy-hydroxides in As adsorption.

  4. Geochronology and geochemistry of early Paleozoic intrusive rocks from the Khanka Massif in the Russian Far East: Petrogenesis and tectonic implications

    Science.gov (United States)

    Xu, Ting; Xu, Wen-Liang; Wang, Feng; Ge, Wen-Chun; Sorokin, A. A.

    2018-02-01

    This paper presents new geochronological and geochemical data for early Paleozoic intrusive rocks from the Khanka Massif in the Russian Far East, with the aim of elucidating the Paleozoic evolution and tectonic attributes of the Khanka Massif. New U-Pb zircon data indicate that early Paleozoic magmatism within the Khanka Massif can be subdivided into at least four stages: 502, 492, 462-445, and 430 Ma. The 502 Ma pyroxene diorites contain 58.28-59.64 wt% SiO2, 2.84-3.69 wt% MgO, and relatively high Cr and Ni contents. Negative εHf(t) values (- 1.8 to - 0.4), along with other geochemical data, indicate that the primary magma was derived from partial melting of mafic lower crust with the addition of mantle material. The 492 Ma syenogranites have high SiO2 and K2O contents, and show positive Eu anomalies, indicating the primary magma was generated by partial melting of lower crust at relatively low pressure. The 445 Ma Na-rich trondhjemites display high Sr/Y ratios and positive εHf(t) values (+ 1.8 to + 3.9), indicating the primary magma was generated by partial melting of thickened hydrous mafic crust. The 430 Ma granitoids have high SiO2 and K2O contents, zircon εHf(t) values of - 5.4 to + 5.8, and two-stage model ages of 1757-1045 Ma, suggesting the primary magma was produced by partial melting of heterogeneous Proterozoic lower crustal material. The geochemistry of these early Paleozoic intrusive assemblages indicates their formation in an active continental margin setting associated with the subduction of a paleo-oceanic plate beneath the Khanka Massif. The εHf(t) values show an increasingly negative trend with increasing latitude, revealing a lateral heterogeneity of the lower crust beneath the Khanka Massif. Regional comparisons of the magmatic events indicate that the Khanka Massif in the Russian Far East has a tectonic affinity to the Songnen-Zhangguangcai Range Massif rather than the adjacent Jiamusi Massif.

  5. Calculation of Suspended Sediment Transport by Combined Wave-Current Flows.

    Science.gov (United States)

    1994-11-01

    Anderson, and Silberg (1985) presented a model that had an eddy viscosity and boundary layer thickness that varied in time. The reference concentration was...sediment model. This model, along with that of Fredsoe, Anderson, and Silberg (1985), are the only two models that account for both the sediment and the...ignores any correlation between the periodic components of the velocity and the concentration. Even in the model of Fredsoe, Anderson, and Silberg (1985

  6. Sedimentological aspects of four Lower-Paleozoic formations in the northern part of the province of León (Spain)

    NARCIS (Netherlands)

    Oele, E.

    1964-01-01

    This paper deals with the sedimentary structures and sedimentary petrography of the four lowermost formations of the Paleozoic as developed in the Northern part of the Province of León (Cantabrian Mountains, Spain). Three of the four formations have a detrital character, and one consists of

  7. Taphonomy of a thick Terebratula bioherm from the Pliocene of southeastern Spain

    Science.gov (United States)

    García-Ramos, Diego A.

    2015-04-01

    Brachiopods were extremely abundant during the Paleozoic era but underwent a dramatic loss of biodiversity at the Permo-Triassic boundary. The comparison of brachiopod and bivalve diversity through geological time shows that the latter were the most successful counterpart at best recovering from mass extinction events. Nonetheless, there are cases where Post-Paleozoic brachiopods stand out as the dominant marine benthos in particular environments, forming paucispecific brachiopod-dominated bioherms. This note describes an example of shallow-water brachiopod bioherm dominated by the terebratulid Terebratula calabra. The shell bed is found in mixed siliciclastic-temperate carbonate deposits of late Early Pliocene age nearby Águilas (southeastern Spain). This unique brachiopod concentration may be helpful to understand the particular success of large-sized brachiopods like Terebratula in Cenozoic environments typically dominated by bivalves. The bioherm attains 1.5 meters in thickness and crops out along a band up to 140 meters wide. The lithology consists of bioturbated fine-grained sands containing poorly sorted bioclasts, mostly fragments of Terebratula. This shell bed also records a diverse fauna, including five brachiopod genera, pectinids (4 genera), oysters (3 genera), in addition to rare gastropods, echinoids, bryozoans, etc. The density and sorting of bioclasts is laterally variable, and the biofabrics range from loosely dispersed to densely-packed, including examples of concave-up vertical stacking and nesting of shells. Most of the fragments of Terebratula preserve the posterior part of the shell only. These fragments generally display corrasion (rounded fractured margins, rounded to completely missing symphytium), bioerosion (prevailing the ichnogenera Entobia, Gnathichnus and Podichnus) and encrustation (mainly by bryozoans, Ancistrocrania, and Pododesmus). The good preservation of Pododesmus contrasts with that of most fragments of Terebratula, although

  8. From success to persistence: Identifying an evolutionary regime shift in the diverse Paleozoic aquatic arthropod group Eurypterida, driven by the Devonian biotic crisis.

    Science.gov (United States)

    Lamsdell, James C; Selden, Paul A

    2017-01-01

    Mass extinctions have altered the trajectory of evolution a number of times over the Phanerozoic. During these periods of biotic upheaval a different selective regime appears to operate, although it is still unclear whether consistent survivorship rules apply across different extinction events. We compare variations in diversity and disparity across the evolutionary history of a major Paleozoic arthropod group, the Eurypterida. Using these data, we explore the group's transition from a successful, dynamic clade to a stagnant persistent lineage, pinpointing the Devonian as the period during which this evolutionary regime shift occurred. The late Devonian biotic crisis is potentially unique among the "Big Five" mass extinctions in exhibiting a drop in speciation rates rather than an increase in extinction. Our study reveals eurypterids show depressed speciation rates throughout the Devonian but no abnormal peaks in extinction. Loss of morphospace occupation is random across all Paleozoic extinction events; however, differential origination during the Devonian results in a migration and subsequent stagnation of occupied morphospace. This shift appears linked to an ecological transition from euryhaline taxa to freshwater species with low morphological diversity alongside a decrease in endemism. These results demonstrate the importance of the Devonian biotic crisis in reshaping Paleozoic ecosystems. © 2016 The Author(s). Evolution © 2016 The Society for the Study of Evolution.

  9. Emplacement and deformation of the Cerro Durazno Pluton delineates stages of the lower Paleozoic tectono-magmatic evolution in NW-Argentina

    Science.gov (United States)

    Hongn, F.; Riller, U.

    2003-04-01

    Regional-scale transpression and transtension are considered to be important in the lower Paleozoic tectono-magmatic evolution of metamorphic and granitoid basement rocks of the southern central Andes. In order to test whether such kinematic changes affected Paleozoic basement rocks on the local scale, i.e. in the Eastern Cordillera of NW-Argentina, we performed a detailed field-based structural analysis of the 456 Ma granitoid Cerro Durazno pluton (CDP). The results of our analysis point to the following stages in the geodynamic evolution of this area: (1) Metamorphism and deformation of Neoproterozoic-Paleozoic basement rocks occurred at high T and low to medium P prior to emplacement of the CDP. This lead to the formation of schists and migmatites characterized by pervasive planar and linear mineral shape fabrics and the growth of andalusite, cordierite and fibrolite. (2) Magmatic foliation in the CDP is defined by the shape-preferred orientation of euhedral feldspar phenocrysts and microgranitoid enclaves. These fabrics are concordant to the NE-SW striking intrusive contact with migmatitic host rocks. The lack of submagmatic or high-T solid-state fabrics in the CDP may indicate that cooling and solidification of granitoid magma was not accompanied by regional deformation. Alternatively, emplacement of granitoid magma may have been facilitated by the creation of open space at mid-crustal level induced by regional deformation. (3) Ductile deformation under greenschist metamorphic conditions overprinted magmatic fabrics of the CDP. This is evident by NW-SE striking metamorphic foliation surfaces transecting magmatic shape fabrics at high angles. During this deformation, the pluton was thrust on a SW-dipping shear zone toward the NE over low-grade metamorphic host rocks which lead to a condensation of metamorphic isograds in the host rocks. Ages of strained pegmatitic dikes indicate that this deformation occurred at about 430 Ma. In summary, the difference in age

  10. Ocean floor sediment as a repository barrier: comparative diffusion data for selected radionuclides in sediments from the Atlantic and Pacific Oceans

    International Nuclear Information System (INIS)

    Schreiner, F.; Sabau, C.; Friedman, A.; Fried, S.

    1986-01-01

    Effective diffusion coefficients for selected radionuclides have been measured in ocean floor sediments to provide data for the assessment of barrier effectiveness in subseabed repositories for nuclear waste. The sediments tested include illite-rich and smectite-rich red clays from the mid plate gyre region of the Pacific Ocean, reducing sediment from the continental shelf of the northwest coast of North America, and Atlantic Ocean sediments from the Southern Nares Abyssal Plain and the Great Meteor East region. Results show extremely small effective diffusion coefficients with values less than 10 -14 m 2 s -1 for plutonium, americium, curium, thorium, and tin. Radionuclides with high diffusion coefficients of approximately 10 -10 m 2 s - include the anionic species pertechnetate, TcO 4 - , iodide, I - , and selenite, SO 3 -2 . Uranyl(VI) and neptunyl(V) ions, which are stable in solution, have diffusion coefficients around 10 -12 m 2 s -1 . The diffusion behavior of most radionuclides is similar in the oxygenated Pacific sediments and in the anoxic sediments from the Atlantic. An exception is neptunium, which is immobilized by Great Meteor East sediment, but has high mobility in Southern Nares Abyssal Plain sediment. Under stagnant conditions a 30 m thick sediment layer forms an effective geologic barrier isolating radionuclides in a subseabed repository from the biosphere

  11. Ocean floor sediment as a repository barrier: comparative diffusion data for selected radionuclides in sediments from the Atlantic and Pacific Oceans

    International Nuclear Information System (INIS)

    Schreiner, F.; Sabau, C.; Friedman, A.; Fried, S.

    1985-01-01

    Effective diffusion coefficients for selected radionuclides have been measured in ocean floor sediments to provide data for the assessment of barrier effectiveness in subseabed repositories for nuclear waste. The sediments tested include illite-rich and smectite-rich red clays from the mid-plate gyre region of the Pacific Ocean, reducing sediment from the continental shelf of the northwest coast of North America, and Atlantic Ocean sediments from the Southern Nares Abyssal Plain and the Great Meteor East region. Results show extremely small effective diffusion coefficients with values less than 10 -14 m 2 s -1 for plutonium, americium, curium, thorium, and tin. Radionuclides with high diffusion coefficients of approximately 10 -10 m 2 s -1 include the anionic species pertechnetate, TcO 4 - , iodide, I - , and selenite, SeO 3 -2 . Uranyl(VI) and neptunyl(V) ions, which are stable in solution, have diffusion coefficients around 10 -12 m 2 s -1 . The diffusion behavior of most radionuclides is similar in the oxygenated Pacific sediments and in the anoxic sediments from the Atlantic. An exception is neptunium, which is immobilized by Great Meteor East sediment, but has high mobility in Southern Nares Abyssal Plain sediment. Under stagnant conditions a 30 m thick sediment layer forms an effective geologic barrier isolating radionuclides in a subseabed repository from the biosphere. 13 refs., 5 figs., 1 tab

  12. Geochemistry of aquatic and terrestrial sediments, Precambrian shield of southeastern Ontario

    Energy Technology Data Exchange (ETDEWEB)

    Hornbrook, E H.W.; Kettles, I M; Shilts, W W

    1986-12-01

    Lake water and sediment samples from approximately 2200 lakes and glacial sediment (sub-solum) samples from about 1800 sites were collected throughout a 38,000 km/sup 2/ rectangular area extending from Georgian Bay east to the Ottawa and St. Lawrence Rivers, Ontario, Canada. Lake water alkalinity and pH patterns are similar to the distribution of carbonate components in glacial drift. Carbonate-rich drift derived from the Paleozoic limestone terrain on the northeast flank of the Precambrian Frontenac Arch has been dispersed in a south-westward direction across a variety of non-calcareous metasedimentary and igneous rocks of the Canadian Shield, providing a buffering capacity to lakes situated in granitic terrain. The distribution patterns of mobile trace and minor elements are influenced by geochemical processes associated with subaerial weathering, ground and surface water transport, and the geochemical environment within the lakes themselves. Although composition of the drift is generally reflected by lake geochemistry, these post depositional processes can cause significant variations between patterns derived from the two sample types. Anions and cations such as SO/sub 4//sup 2 -/, Cl/sup -/, Na/sup +/, and F/sup -/ exhibit concentration patterns thought to reflect both anthropogenic inputs and natural variations due to differences in the geology. All regional geochemical patterns may show evidence of local enhancement caused by high concentrations of chemically distinctive minerals in drift or nearby bedrock. 4 references.

  13. Elemental analysis of river sediments by PIXE and PIGE

    International Nuclear Information System (INIS)

    Kennedy, V.J.; Augusthy, A.; Varier, K.M.; Magudapathy, P.; Panchapakesan, S.; Nair, K.G.M.; Vijayan, V.

    1999-01-01

    The Chaliyar river, located in Kerala, India has shown preoccupying pollution levels, that constitute a threat to public health and the ecological system. PIXE and PIGE techniques have been employed to measure the elemental concentrations in the river sediment samples. Thick targets were prepared out of the sediment samples collected from various sites along the course of the river. The measurements were carried out using 3 MeV proton beam obtained from 3 MV Tandem pelletron accelerator at Institute of Physics, Bhubaneswar. The elemental concentrations, especially that of heavy metals, at different sites are discussed in detail. Our results show that sediments from a site where the industrial activities are high are significantly high in concentrations of heavy metals (Cr, Ni, Cu, Zn, Hg and Pb) than those collected from non-industrial sites. The measured values are compared with the average composition of unpolluted river sediments and other national and international river sediments. (author)

  14. Ion migration in ocean sediments: subseafloor radioactive waste disposal

    International Nuclear Information System (INIS)

    Nuttall, H.E.; Ray, A.K.; Davis, E.J.

    1980-01-01

    In this study of seabed disposal, analytical ion transport models were developed and used to elucidate ion migration through ocean sediments and to study the escape of ions from the ocean floor into the water column. An unsteady state isothermal diffusion model was developed for the region far from the canister to examine the effects of ion diffusion, adsorption, radioactive decay, sediment thickness and canister position. Analytical solutions were derived to represent the transient concentration profiles within the sediment, ion flux and the ion discharge rate to the water column for two types of initial conditions: instantaneous dissolution of the canister and constant canister leakage. Generalized graphs showing ion migration and behavior are presented

  15. How long-term dynamics of sediment subduction controls short-term dynamics of seismicity

    Science.gov (United States)

    Brizzi, S.; van Zelst, I.; van Dinther, Y.; Funiciello, F.; Corbi, F.

    2017-12-01

    Most of the world's greatest earthquakes occur along the subduction megathrust. Weak and porous sediments have been suggested to homogenize the plate interface and thereby promote lateral rupture propagation and great earthquakes. However, the importance of sediment thickness, let alone their physical role, is not yet unequivocally established. Based on a multivariate statistical analysis of a global database of 62 subduction segments, we confirm that sediment thickness is one of the key parameters controlling the maximum magnitude a megathrust can generate. Moreover, Monte Carlo simulations highlighted that the occurrence of great earthquakes on sediment-rich subduction segments is very unlikely (p-value≪0.05) related to pure chance. To understand how sediments in the subduction channel regulate earthquake size, this study extends and demystifies multivariate, spatiotemporally limited data through numerical modeling. We use the 2D Seismo-Thermo-Mechanical modeling approach to simulate both the long- and short-term dynamics of subduction and related seismogenesis (van Dinther et al., JGR, 2013). These models solve for the conservation of mass, momentum and energy using a visco-elasto-plastic rheology with rate-dependent friction. Results show that subducted sediments have a strong influence on the long-term evolution of the convergent margin. Increasing the sediment thickness on the incoming plate from 0 to 6 km causes a decrease of slab dip from 23° to 10°. This, in addition to increased radiogenic heating, extends isotherms, thereby widening the seismogenic portion of the megathrust from 80 to 150 km. Consequently, over tens of thousands of years, we observe that the maximum moment magnitude of megathrust earthquakes increases from 8.2 to 9.2 for these shallower and warmer interfaces. In addition, we observe more and larger splay faults, which could enhance vertical seafloor displacements. These results highlight the primary role of subducted sediments in

  16. Crustal structure beneath the Paleozoic Parnaíba Basin revealed by airborne gravity and magnetic data, Brazil

    Science.gov (United States)

    de Castroa, David L.; Fuck, Reinhardt A.; Phillips, Jeffrey D.; Vidotti, Roberta M.; Bezerra, Francisco H. R.; Dantas, Elton L.

    2014-01-01

    The Parnaíba Basin is a large Paleozoic syneclise in northeastern Brazil underlain by Precambrian crystalline basement, which comprises a complex lithostructural and tectonic framework formed during the Neoproterozoic–Eopaleozoic Brasiliano–Pan African orogenic collage. A sag basin up to 3.5 km thick and 1000 km long formed after the collage. The lithologic composition, structure, and role in the basin evolution of the underlying basement are the focus of this study. Airborne gravity and magnetic data were modeled to reveal the general crustal structure underneath the Parnaíba Basin. Results indicate that gravity and magnetic signatures delineate the main boundaries and structural trends of three cratonic areas and surrounding Neoproterozoic fold belts in the basement. Triangular-shaped basement inliers are geophysically defined in the central region of this continental-scale Neoproterozoic convergence zone. A 3-D gravity inversion constrained by seismological data reveals that basement inliers exhibit a 36–40.5 km deep crustal root, with borders defined by a high-density and thinner crust. Forward modeling of gravity and magnetic data indicates that lateral boundaries between crustal units are limited by Brasiliano shear zones, representing lithospheric sutures of the Amazonian and São Francisco Cratons, Tocantins Province and Parnaíba Block. In addition, coincident residual gravity, residual magnetic, and pseudo-gravity lows indicate two complex systems of Eopaleozoic rifts related to the initial phase of the sag deposition, which follow basement trends in several directions.

  17. Structural framework of the Mississippi Embayment of southern Illinois

    International Nuclear Information System (INIS)

    Kolata, D.R.

    1978-01-01

    The purpose of this study is to determine the nature, age, and extent of faulting in the Mississippi Embayment of southernmost Illinois. Preliminary results are reported on the mapping of the configuration of the Cretaceous base and the thickness and distribution of Cretaceous sediments. A sub-Cretaceous geologic map is being compiled to locate areas where the embayment areas are faulted and folded. Data from one of the five sites selected for detailed study show that the faulting observed is due to landsliding and not to tectonic activity. Seismic refraction and earth resistivity surveys at a second site have failed to define a geologic structure that is suspected of being a fault, possibly extending into the Paleozoic bedrock

  18. Rapid sedimentation of iron oxyhydroxides in an active hydrothermal shallow semi-enclosed bay at Satsuma Iwo-Jima Island, Kagoshima, Japan

    Science.gov (United States)

    Kiyokawa, Shoichi; Ueshiba, Takuya

    2015-04-01

    Hydrothermal activity is common in the fishing port of Nagahama Bay, a small semi-enclosed bay located on the southwest coast of Satsuma Iwo-Jima Island (38 km south of Kyushu Island, Japan). The bay contains red-brown iron oxyhydroxides and thick deposits of sediment. In this work, the high concentration and sedimentation rates of oxyhydroxide in this bay were studied and the sedimentary history was reconstructed. Since dredging work in 1998, a thickness of 1.0-1.5 m of iron oxyhydroxide-rich sediments has accumulated on the floor of the bay. To estimate the volume of iron oxyhydroxide sediments and the amount discharged from hydrothermal vents, sediment traps were operated for several years and 13 sedimentary core samples were collected to reconstruct the 10-year sedimentary history of Nagahama Bay. To confirm the timing of sedimentary events, the core data were compared with meteorological records obtained on the island, and the ages of characteristic key beds were thus identified. The sedimentation rate of iron oxyhydroxide mud was calculated, after correcting for sediment input from other sources. The sediments in the 13 cores from Nagahama Bay consist mainly of iron oxyhydroxide mud, three thick tephra beds, and a topmost thick sandy mud bed. Heavy rainfall events in 2000, 2001, 2002, and 2004-2005 coincide with tephra beds, which were reworked from Iwo-Dake ash deposits to form tephra-rich sediment. Strong typhoon events with gigantic waves transported outer-ocean-floor sediments and supplied quartz, cristobalite, tridymite, and albite sands to Nagahama Bay. These materials were redeposited together with bay sediments as the sandy mud bed. Based on the results from the sediment traps and cores, it is estimated that the iron oxyhydroxide mud accumulated in the bay at the relatively rapid rate of 33.3 cm/year (from traps) and 2.8-4.9 cm/year (from cores). The pore water contents within the sediment trap and core sediments are 73%-82% and 47%-67%, respectively

  19. Migration of trace heavy metals at the sea water/sediment interface

    International Nuclear Information System (INIS)

    Terada, Kikuo; Tomiyama, Chisato

    1984-01-01

    Migration behavior of some trace heavy metals such as Co(II), Cu(II), Mn(II) and Zn(II) at the sea water/sediment interface was investigated by tank experiments. The sea water which was doped with these metal ions (ppb to ppm levels) allowed to contact with the raw-, ignited- and autoclaved-marine sediments and the change of the concentration of each metal was traced at definite time intervals. At the end of the experiments, a core sample of the sediment was taken and analyzed for each metal in every 1 mm thick segment. On the other hand, the surface sediment was submitted to partial extraction with various kinds of reagents to estimate the chemical species of the metals captured in the sediment. While every metal ion was quickly adsorbed on surface of the raw sediment, a concentration gradient from surface to bottom of the water phase occurred in the ignited sediment system. The migration of manganese to the sediment phase was assumed to be concerned with bacterial activity in the sediment. Copper and zinc seemed to be adsorbed very quickly onto some fine sediment particles by the formation of organometallic complexes with some organic materials existing in the sediments. Cobalt migrated relatively fast downward within the sediment phase after its deposition. (author)

  20. The preglacial sediment record of Lake Ladoga, Russia - first results from a seismic survey and sediment coring in 2013

    Science.gov (United States)

    Melles, Martin; Krastel, Sebastian; Fedorov, Grigory; Subetto, Dmitry A.; Savelieva, Larisa A.; Andreev, Andrej; Wagner, Bernd

    2014-05-01

    more than 10 m in thickness. They usually are bordered by a hard reflector underneath that may represent coarse-grained sediments or a till, which in most areas is not penetrated by the acoustic waves. In particular in the western part of the lake, however, these sediment successions can be underlain by sedimentary strata of up to 60 m thickness that fill steeply sloped depressions or channels. Sediment coring at two sites in western Ladoga Lake confirmed the seismic interpretation of the postglacial sediment succession. At one of these sites, the basal reflector at about 13 m depth was penetrated another ca. 10 m into preglacial sediments. According to initial pollen data, these sediments were formed during an interglacial with a slightly warmer climate than that of the Holocene. Further work is currently carried out, for instance, to identify which of the Quaternary interglacials is respresented by the sediments cored in 2013.

  1. Ocean floor sediment as a repository barrier: comparative diffusion data for selected radionuclides in sediments from the Atlantic and Pacific Oceans

    Energy Technology Data Exchange (ETDEWEB)

    Schreiner, F.; Sabau, C.; Friedman, A.; Fried, S.

    1985-01-01

    Effective diffusion coefficients for selected radionuclides have been measured in ocean floor sediments to provide data for the assessment of barrier effectiveness in subseabed repositories for nuclear waste. The sediments tested include illite-rich and smectite-rich red clays from the mid-plate gyre region of the Pacific Ocean, reducing sediment from the continental shelf of the northwest coast of North America, and Atlantic Ocean sediments from the Southern Nares Abyssal Plain and the Great Meteor East region. Results show extremely small effective diffusion coefficients with values less than 10/sup -14/ m/sup 2/s/sup -1/ for plutonium, americium, curium, thorium, and tin. Radionuclides with high diffusion coefficients of approximately 10/sup -10/ m/sup 2/s/sup -1/ include the anionic species pertechnetate, TcO/sub 4//sup -/, iodide, I/sup -/, and selenite, SeO/sub 3//sup -2/. Uranyl(VI) and neptunyl(V) ions, which are stable in solution, have diffusion coefficients around 10/sup -12/ m/sup 2/s/sup -1/. The diffusion behavior of most radionuclides is similar in the oxygenated Pacific sediments and in the anoxic sediments from the Atlantic. An exception is neptunium, which is immobilized by Great Meteor East sediment, but has high mobility in Southern Nares Abyssal Plain sediment. Under stagnant conditions a 30 m thick sediment layer forms an effective geologic barrier isolating radionuclides in a subseabed repository from the biosphere. 13 refs., 5 figs., 1 tab.

  2. Lithospheric thickness jumps at the S-Atlantic continental margins from satellite gravity data and modelled isostatic anomalies

    Science.gov (United States)

    Shahraki, Meysam; Schmeling, Harro; Haas, Peter

    2018-01-01

    Isostatic equilibrium is a good approximation for passive continental margins. In these regions, geoid anomalies are proportional to the local dipole moment of density-depth distributions, which can be used to constrain the amount of oceanic to continental lithospheric thickening (lithospheric jumps). We consider a five- or three-layer 1D model for the oceanic and continental lithosphere, respectively, composed of water, a sediment layer (both for the oceanic case), the crust, the mantle lithosphere and the asthenosphere. The mantle lithosphere is defined by a mantle density, which is a function of temperature and composition, due to melt depletion. In addition, a depth-dependent sediment density associated with compaction and ocean floor variation is adopted. We analyzed satellite derived geoid data and, after filtering, extracted typical averaged profiles across the Western and Eastern passive margins of the South Atlantic. They show geoid jumps of 8.1 m and 7.0 m for the Argentinian and African sides, respectively. Together with topography data and an averaged crustal density at the conjugate margins these jumps are interpreted as isostatic geoid anomalies and yield best-fitting crustal and lithospheric thicknesses. In a grid search approach five parameters are systematically varied, namely the thicknesses of the sediment layer, the oceanic and continental crusts and the oceanic and the continental mantle lithosphere. The set of successful models reveals a clear asymmetry between the South Africa and Argentine lithospheres by 15 km. Preferred models predict a sediment layer at the Argentine margin of 3-6 km and at the South Africa margin of 1-2.5 km. Moreover, we derived a linear relationship between, oceanic lithosphere, sediment thickness and lithospheric jumps at the South Atlantic margins. It suggests that the continental lithospheres on the western and eastern South Atlantic are thicker by 45-70 and 60-80 km than the oceanic lithospheres, respectively.

  3. Sediment contributions from floodplains and legacy sediments to Piedmont streams of Baltimore County, Maryland

    Science.gov (United States)

    Donovan, Mitchell; Miller, Andrew; Baker, Matthew; Gellis, Allen

    2015-04-01

    Disparity between watershed erosion rates and downstream sediment delivery has remained an important theme in geomorphology for many decades, with the role of floodplains in sediment storage as a common focus. In the Piedmont Province of the eastern USA, upland deforestation and agricultural land use following European settlement led to accumulation of thick packages of overbank sediment in valley bottoms, commonly referred to as legacy deposits. Previous authors have argued that legacy deposits represent a potentially important source of modern sediment loads following remobilization by lateral migration and progressive channel widening. This paper seeks to quantify (1) rates of sediment remobilization from Baltimore County floodplains by channel migration and bank erosion, (2) proportions of streambank sediment derived from legacy deposits, and (3) potential contribution of net streambank erosion and legacy sediments to downstream sediment yield within the Mid-Atlantic Piedmont. We calculated measurable gross erosion and deposition rates within the fluvial corridor along 40 valley segments from 18 watersheds with drainage areas between 0.18 and 155 km2 in Baltimore County, Maryland. We compared stream channel and floodplain morphology from lidar-based digital elevation data collected in 2005 with channel positions recorded on 1:2400 scale topographic maps from 1959-1961 in order to quantify 44-46 years of channel change. Sediment bulk density and particle size distributions were characterized from streambank and channel deposit samples and used for volume to mass conversions and for comparison with other sediment sources. Average annual lateral migration rates ranged from 0.04 to 0.19 m/y, which represented an annual migration of 2.5% (0.9-4.4%) channel width across all study segments, suggesting that channel dimensions may be used as reasonable predictors of bank erosion rates. Gross bank erosion rates varied from 43 to 310 Mg/km/y (median = 114) and were

  4. A New Model of the Early Paleozoic Tectonics and Evolutionary History in the Northern Qinling, China

    Science.gov (United States)

    Dong, Yunpeng; Zhang, Guowei; Yang, Zhao; Qu, Hongjun; Liu, Xiaoming

    2010-05-01

    The Qinling Orogenic Belt extends from the Qinling Mountains in the west to the Dabie Mountains in the east. It lies between the North China and South China Blocks, and is bounded on the north by the Lushan fault and on the south by the Mianlue-Bashan-Xiangguang fault (Zhang et al., 2000). The Qinling Orogenic Belt itself is divided into the North and South Qinling Terranes by the Shangdan suture zone. Although the Shangdan zone is thought to represent the major suture separating the two blocks, there still exists debate about the timing and mechanism of convergence between these two blocks. For instance, some authors suggested an Early Paleozoic collision between the North China Block and South China Block (Ren et al., 1991; Kroner et al., 1993; Zhai et al., 1998). Others postulated left-lateral strike-slip faulting along the Shangdan suture at ca. 315 Ma and inferred a pre-Devonian collision between the two blocks (Mattauer et al., 1985; Xu et al., 1988). Geochemistry of fine-grained sediments in the Qinling Mountains was used to argue for a Silurian-Devonian collision (Gao et al., 1995). A Late Triassic collision has also been proposed (Sengor, 1985; Hsu et al., 1987; Wang et al., 1989), based on the formation of ultrahigh-pressure metamorphic rocks in the easternmost part of the Qinling Orogenic Belt at ~230 Ma (e.g., Li et al., 1993; Ames et al., 1996). Paleomagnetic data favor a Late Triassic-Middle Jurassic amalgamation of the North China and South China Blocks (Zhao and Coe, 1987; Enkin et al., 1992). It is clear that most authors thought that the Qinling Mountains are a collisional orogen, even they have different methods about the timing of the orogeny. Based on new detailed investigations, we propose a new model of the Early Paleozoic Tectonics and Evolutionary History between the North China and South China Blocks along the Shangdan Suture. The Shangdan suture is marked by a great number of ophiolites, island-arc volcanic rocks and other related rock

  5. Equilibrium sampling for a thermodynamic assessment of contaminated sediments

    DEFF Research Database (Denmark)

    ) govern diffusive uptake and partitioning. Equilibrium sampling of sediment was introduced 15 years ago to measure Cfree, and it has since developed into a straightforward, precise and sensitive approach for determining Cfree and other exposure parameters that allow for thermodynamic assessment...... of polluted sediments. Glass jars with µm-thin silicone coatings on the inner walls can be used for ex situ equilibration while a device housing several silicone-coated fibers can be used for in situ equilibration. In both cases, parallel sampling with varying silicone thicknesses can be applied to confirm...... will focus at the latest developments in equilibrium sampling concepts and methods. Further, we will explain how these approaches can provide a new basis for a thermodynamic assessment of polluted sediments....

  6. The Paleozoic metamorphic history of the Central Orogenic Belt of China from 40Ar/39Ar geochronology of eclogite garnet fluid inclusions

    NARCIS (Netherlands)

    Qiu, H.N.; Wijbrans, J.R.

    2008-01-01

    The pressure-temperature-time evolution of the UHP eclogites of Dabie-Sulu, in the eastern sector of the Central Orogenic Belt of China shows a complex pattern of predominantly Triassic, and to a lesser extent Early Paleozoic ages.

  7. Tectonic contact beetwen Paleozoic and Triassic rocks south of Podolševa (Slovenia

    Directory of Open Access Journals (Sweden)

    Bogomir Celarc

    2002-12-01

    Full Text Available Tectonic contact between Paleozoic and Triassic rocks south of Podolševa, which passes prominent cliffs over the left bank of Savinja river (Klemenča peč, Jamnikova peč, Golerjeva peč, Strevčeva peč and Huda peč, is on the basis of the new mapping a steep fault, dipping to the north. In the last phase, the fault was dextral strike – slip active, before was probably reverse, and can represent accompanying structure of Periadriatic lineament. It was under transpresive tectonic regime and complies with model of positive flower structure.We named it Podol{evski prelom (Podol{eva fault.

  8. Distribution and origin of sediments on the northern Sunda Shelf, South China Sea

    Science.gov (United States)

    Wu, Shi-Guo; Wong, H. K.; Luo, You-Lang; Liang, Zhi-Rong

    1999-03-01

    Seventy-seven surface sediment samples and core samples from the outer Sunda Shelf were analyzed and a number of seismic profiles of the shelf were interpreted. The bottom sediments could be divided into six types: terrigenous sand, biogenic sand, silt-sand, clay-silt-sand, clayey silt and coral reef detritus. Our seismic data showed a thick, prograding Pleistocene deltaic sequence near the shelf-break and a thin Holocene sedimentary layer on the outer shelf. Eleven thermoluminescence (TL) ages were determined. The oldest relict sediments were derived from Late Pleistocene deposits. Based on sediment types, ages, and origins, five sedimentary areas were identified: area of modern Mekong sediments; insular shelf area receiving modern sediments from small Borneo rivers; shelf area near the Natuna-Anambas islands in the southeastern Gulf of Thailand Basin off the Malay Peninsula; area of relict sediments on the outer shelf north of the Natuna Islands, and typical coral reefs and detritus sediments.

  9. Hf Isotope Evidence for Subducted Basalt and Sediment Contributions to the Eastern Trans-Mexican Volcanic Belt

    Science.gov (United States)

    Cai, Y.; Tuena, A. G.; Capra, L.; Straub, S. M.; Goldstein, S. L.; Langmuir, C. H.

    2005-12-01

    Magmas generated at thick crust continental arcs often have enriched continental crust-like trace element patterns and Pb-Sr-Nd isotope ratios that are intermediate to both upper mantle and crustal compositions. Thus it is difficult to distinguish between contributions from (a) the subducted basalt and the upper mantle wedge, and (b) subducted sediment and the continental crust. These issues have been the focus of major controversy. Here we show evidence for subduction contributions to lavas in a classic thick crust environment. In Eastern Trans-Mexican Volcanic Belt, the upper continental crust is 30 km to 45 km thick. However, primitive mafic lavas erupt on many sites across the arc. We have analyzed the subducting sediments as represented by DSDP 487, located seaward of the trench, where the lower third of the sediment column has strongly hydrothermal pelagic features and the upper two-thirds is composed of terrigenous sediments. The pelagic sediments have distinctive features that could be used to identify a subduction component in the volcanics, including high REE/Hf, negative Ce anomalies, and Nd-Hf isotopes that lie on the "seawater array" and offset from the "mantle-crust" array. We have focused on a unique series of lavas from volcano Nevado de Toluca, located southwest of Mexico City. These lavas show negative Ce anomalies coupled with low REE/Hf and Zr/Nd ratios. Hf-Nd isotope ratios show a shallow trend compared to the mantle-crust array, consistent with a pelagic component. In addition, Hf isotopes show a striking positive correlation with Ce anomalies that trend toward the pelagic sediment compositions. These and other observations provide clear evidence for a component from subducted sediment in the lavas. In addition, there is a negative correlation of Lu/Hf and Hf isotopes that requires a mixing endmember with MORB-like Hf isotope ratios but with lower than MORB Lu/Hf. This indicates a melt from eclogitic subducted basalt. Compared to other

  10. Paleozoic-involving thrust array in the central Sierras Interiores (South Pyrenean Zone, Central Pyrenees): regional implications

    Science.gov (United States)

    Rodriguez, L.; Cuevas, J.; Tubía, J. M.

    2012-04-01

    This work deals with the structural evolution of the Sierras Interiores between the Tena and Aragon valleys. The Sierras Interiores is a WNW-trending mountain range that bounds the South Pyrenean Zone to the north and that is characterized by a thrust-fold system with a strong lithological control that places preferably decollements in Triassic evaporites. In the studied area of the Sierras Interiores Cenomanian limestones cover discordantly the Paleozoic rocks of the Axial Zone because there is a stratigraphic lacuna developed from Triassic to Late Cretaceous times. A simple lithostratigraphy of the study area is made up of Late Cenomanian to Early Campanian limestones with grey colour and massive aspect in landscape (170 m, Lower calcareous section), Campanian to Maastrichtian brown coloured sandstones (400-600 m, Marboré sandstones) and, finally, Paleocene light-coloured massive limestones (130-230 m), that often generate the higher topographic levels of the Sierras Interiores due to their greater resistance to erosion. Above the sedimentary sequence of the Sierras Interiores, the Jaca Basin flysch succession crops out discordantly. Based on a detailed mapping of the studied area of the Sierras Interiores, together with well and structural data of the Jaca Basin (Lanaja, 1987; Rodríguez and Cuevas, 2008) we have constructed a 12 km long NS cross section, approximately parallel to the movement direction deduced for this region (Rodríguez et al., 2011). The main structure is a thrust array made up of at least four Paleozoic-involving thrusts (the deeper thrust system) of similar thickness in a probably piggyback sequence, some of which are blind thrusts that generate fold-propagation-folds in upper levels. The higher thrust of the thrust array crops out duplicating the lower calcareous section all over the Sierras Interiores. The emplacement of the deeper thrust system generated the tightness of previous structures: south directed piggyback duplexes (the upper

  11. The Cottage Grove fault system (Illinois Basin): Late Paleozoic transpression along a Precambrian crustal boundary

    Science.gov (United States)

    Duchek, A.B.; McBride, J.H.; Nelson, W.J.; Leetaru, H.E.

    2004-01-01

    The Cottage Grove fault system in southern Illinois has long been interpreted as an intracratonic dextral strike-slip fault system. We investigated its structural geometry and kinematics in detail using (1) outcrop data, (2) extensive exposures in underground coal mines, (3) abundant borehole data, and (4) a network of industry seismic reflection profiles, including data reprocessed by us. Structural contour mapping delineates distinct monoclines, broad anticlines, and synclines that express Paleozoic-age deformation associated with strike slip along the fault system. As shown on seismic reflection profiles, prominent near-vertical faults that cut the entire Paleozoic section and basement-cover contact branch upward into outward-splaying, high-angle reverse faults. The master fault, sinuous along strike, is characterized along its length by an elongate anticline, ???3 km wide, that parallels the southern side of the master fault. These features signify that the overall kinematic regime was transpressional. Due to the absence of suitable piercing points, the amount of slip cannot be measured, but is constrained at less than 300 m near the ground surface. The Cottage Grove fault system apparently follows a Precambrian terrane boundary, as suggested by magnetic intensity data, the distribution of ultramafic igneous intrusions, and patterns of earthquake activity. The fault system was primarily active during the Alleghanian orogeny of Late Pennsylvanian and Early Permian time, when ultramatic igneous magma intruded along en echelon tensional fractures. ?? 2004 Geological Society of America.

  12. Supercritical strata in Lower Paleozoic fluvial rocks: a super critical link to upper flow regime processes and preservation in nature

    Science.gov (United States)

    Lowe, David; Arnott, Bill

    2015-04-01

    Recent experimental work has much improved our understanding of the lithological attributes of open-channel supercritical flow deposits, namely those formed by antidunes, chutes-and-pools and cyclic steps. However their limited documentation in the ancient sedimentary record brings into question details about their geological preservation. Antidune, chute-and-pool and cyclic step deposits are well developed in sandy ephemeral fluvial deposits of the Upper Cambrian - Lower Ordovician Potsdam Group in the Ottawa Embayment of eastern North America. These high energy fluvial strata form dm- to a few m-thick units intercalated within thick, areally expansive successions of sheet sandstones consisting mostly of wind ripple and adhesion stratification with common deflation lags. Collectively these strata record deposition in a semi-arid environment in which rare, episodic high-energy fluvial events accounted for most of the influx of sediment from upland sources. Following deposition, however, extensive aeolian processes reworked the sediment pile, and hence modified profoundly the preserved stratigraphic record. Antidune deposits occur as 0.2 - 1.6 m thick cosets made up of 2 - 15 cm thick lenticular sets of low angle (≤ 20o) cross-stratified, medium- to coarse-grained sandstone bounded by low-angle (5 - 15o) concave-upward scours and, in many cases, capped by low angle (10 - 15o) convex-upwards symmetrical formsets. Chute-and-pool deposits form single sets, 5 - 55 cm thick and 0.6 - 6 m wide, with scoured bases and low to high angle (5 - 25o) sigmoidal cross-strata consisting of medium- to coarse-grained sandstone. Cyclic step deposits consist of trough cross-stratified sets, 20 cm - 1.6 m thick, 2.5 - 12 m long and 7 - 35 m wide, typically forming trains that laterally are erosively juxtaposed at regularly-spaced intervals. They are composed of medium- to coarse-grained sandstone with concave-up, moderate to high angle (15 - 35o) cross-strata with tangential bases

  13. Identification of Sungai Batu Sediment using 2-D Resistivity Imaging and Seismic Refraction Methods for Ancient River Mapping at Kedah, Malaysia

    Science.gov (United States)

    Andika, F.; Saad, R.; Saidin, M. M.; Muztaza, N. M.; Amsir

    2018-04-01

    Sungai Batu is an earliest civilization in Southeast Asia with evidenced by the discovery of riverside jetty, iron smelting, and ritual monuments. The evidences can lead to prediction of buried river caused by geological and sedimentation process. This study was conducted to study sediment deposit characteristic and to map thickness of the sediments using 2-D resistivity imaging and seismic refraction for ancient river mapping. A total of thirty, 2-D resistivity and nine seismic survey lines were conducted at the study area. Four of the lines R1-R4 and S1-S4 were correlated and validated with existing on site boreholes BH1-BH4 to identify sediment type and thickness. The validated values applied to the remaining survey lines which no borehole record to map the subsurface of the study area. Based on the results, Sungai Batu area consist of clay with resistivity value of 6.6-25.9 Ω.m and velocity value of 716.9-1606.9 m/s; sandy clay with resistivity value of 6-265.1 Ω.m and velocity value of 1003.6-1901.4 m/s; while shale was identified with resistivity value of >668.6 Ω.m and velocity value of >2051.7 m/s. Boundary between clay/sandy clay with shale was identified with resistivity value of 314 Ω.m and velocity value of 1822 m/s. The integration of the 2-D resistivity and seismic refraction identified that the thickness of Sungai Batu sediment is 0-150 m and Sungai Batu ancient river was successfully map based on thickness of sediment which is >45 m.

  14. A paleoenvironmental study of subsurface Quaternary sediments at Wainuiomata, Wellington, New Zealand, and tectonic implications

    Energy Technology Data Exchange (ETDEWEB)

    Begg, J G; Mildenhall, D C; Lyon, G L; Stephenson, W R; Funnell, R H; Van Dissen, R J; Bannister, S; Brown, L J [Institute of Geological and Nuclear Sciences Ltd., Lower Hutt (New Zealand); Pillans, B; Harper, M A [Research School of Earth Sciences, Victoria University of Wellington, Wellington (New Zealand); Whitton, J [Manaaki Whenua - Landcare Research, Lower Hutt, (New Zealand)

    1994-12-31

    A stratigraphic drillhole (WS-1) sited on the floor of Wainuiomata Valley near Lower Hutt, revealed a 61.6 m thick Quaternary sequence overlying Torlesse Supergroup greywacke sandstone and argillite. The Quaternary sediments consist of three sequences separated by disconformities. The lower sequence, 10.7 m thick (61.6-50.9 m), consists of fluvial sediments of probable early Quaternary age. The middle sequence, about 48.3 m in thickness (50.9-c. 2.6 m), spans most of the Last Glaciation. Fluvial/overbnak (50.9-42.0 m), floodplain/swamp (42.9-34.5 m), and fluvial (34.5-31.3 m) sediments overlie the disconformity at 50.9 m. Conformably overlying these sediments are swamp and lacustrine deposits between 31.3 and 4.1 m. Diatoms and algal spores and coenobia show the existence of an extensive lake during much of this sequence, from 25.6 to 4.0 m. at the peak of its development, at a drillhole depth of c. 23 m, the lake was >10 m deep and had a high algal biomass. Kawakawa Tephra (22 600 yr b.p.) occurs near the top of the middle sequence at 4.1 m depth. The upper sequence, of Holocene-Recent age, is <2.6 m thick, including .06 m of fill. The existence of sediments of the lower sequence of at least Castlecliffian age (early Pleistocene) uncomformably overlying basement greywacke provides a minimum age for the K-surface in the area. The Last Glacial sediments show evidence of ponfing, which may be a result of one factor or a more of the following: ponding behind an aggradational terrace of the Wainuiomata River; landslide blockage of the Black Stream drainage near its confluence with Wainuiomata River; and tectonic deformation. Progressive tectonic deformation since the start of the Last Glaciation is considered the most likely dominant factor. This has resulted in the elevation of greywacke basement near the junction of Black Stream and Wainuiomata River. The nature of the deformation - faulting, tilting, and/or folding - has not been established. 38 refs,6 figs,2 tables.

  15. A paleoenvironmental study of subsurface Quaternary sediments at Wainuiomata, Wellington, New Zealand, and tectonic implications

    International Nuclear Information System (INIS)

    Begg, J.G.; Mildenhall, D.C.; Lyon, G.L.; Stephenson, W.R.; Funnell, R.H.; Van Dissen, R.J.; Bannister, S.; Brown, L.J.; Pillans, B.; Harper, M.A.; Whitton, J.

    1993-01-01

    A stratigraphic drillhole (WS-1) sited on the floor of Wainuiomata Valley near Lower Hutt, revealed a 61.6 m thick Quaternary sequence overlying Torlesse Supergroup greywacke sandstone and argillite. The Quaternary sediments consist of three sequences separated by disconformities. The lower sequence, 10.7 m thick (61.6-50.9 m), consists of fluvial sediments of probable early Quaternary age. The middle sequence, about 48.3 m in thickness (50.9-c. 2.6 m), spans most of the Last Glaciation. Fluvial/overbnak (50.9-42.0 m), floodplain/swamp (42.9-34.5 m), and fluvial (34.5-31.3 m) sediments overlie the disconformity at 50.9 m. Conformably overlying these sediments are swamp and lacustrine deposits between 31.3 and 4.1 m. Diatoms and algal spores and coenobia show the existence of an extensive lake during much of this sequence, from 25.6 to 4.0 m. at the peak of its development, at a drillhole depth of c. 23 m, the lake was >10 m deep and had a high algal biomass. Kawakawa Tephra (22 600 yr b.p.) occurs near the top of the middle sequence at 4.1 m depth. The upper sequence, of Holocene-Recent age, is <2.6 m thick, including .06 m of fill. The existence of sediments of the lower sequence of at least Castlecliffian age (early Pleistocene) uncomformably overlying basement greywacke provides a minimum age for the K-surface in the area. The Last Glacial sediments show evidence of ponfing, which may be a result of one factor or a combination of the following: ponding behind an aggradational terrace of the Wainuiomata River; landslide blockage of the Black Stream drainage near its confluence with Wainuiomata River; and tectonic deformation. Progressive tectonic deformation since about the start of the Last Glaciation is considered the most likely dominant factor. This has resulted in the elevation of greywacke basement near the junction of Black Stream and Wainuiomata River. The nature of the deformation - faulting, tilting, and/or folding - has not been established. (authors

  16. Sediment dispersal in the macro tidal Gulf of Kachchh, India

    Digital Repository Service at National Institute of Oceanography (India)

    Chauhan, O.S.

    of the inner gulf is marked with U and V shaped cuttings extending in the parallel clays, deposited in an earlier phase of deposition. In the outer gulf, there exists a palaeo-channel, buried under 18 m thick sediments (in the central region). Existence...

  17. Role of storms and forest practices in sedimentation of an Oregon Coast Range lake

    Science.gov (United States)

    Richardson, K.; Hatten, J. A.; Wheatcroft, R. A.; Guerrero, F. J.

    2014-12-01

    The design of better management practices in forested watersheds to face climate change and the associated increase in the frequency of extreme events requires a better understanding of watershed responses to extreme events in the past and also under management regimes. One of the most sensitive watershed processes affected is sediment yield. Lake sediments record events which occur in a watershed and provide an opportunity to examine the interaction of storms and forest management practices in the layers of the stratigraphy. We hypothesize that timber harvesting and road building since the 1900s has resulted in increases in sedimentation; however, the passage of the Oregon Forest Practices Act (OFPA) in 1972 has led to a decrease in sedimentation. Sediment cores were taken at Loon Lake in the Oregon Coast Range. The 32-m deep lake captures sediment from a catchment highly impacted by recent land use and episodic Pacific storms. We can use sedimentological tools to measure changes in sediment production as motivated by extreme floods before settlement, during a major timber harvesting period, and after installation of forestry Best Management Practices. Quantification of changes in particle size and elemental composition (C, N, C/N) throughout the cores can elucidate changes in watershed response to extreme events, as can changes in layer thickness. Age control in the cores is being established by Cesium-137 and radiocarbon dating. Given the instrumental meteorological data and decadal climate reconstructions, we will disentangle climate driven signals from changes in land use practices. The sediment shows distinct laminations and varying thickness of layers throughout the cores. Background deposition is composed of thin layers (events to determine if the OFPA is having an effect on reducing sedimentation rates as a result of extreme magnitude storm events.

  18. Prediction of bedload sediment transport for heterogeneous sediments in shape

    Science.gov (United States)

    Durafour, Marine; Jarno, Armelle; Le Bot, Sophie; Lafite, Robert; Marin, François

    2015-04-01

    Key words: Particle shape, in-situ measurements, bedload transport, heterogeneous sediments Bedload sediment transport in the coastal area is a dynamic process mainly influenced by the type of hydrodynamic forcings involved (current and/or waves), the flow properties (velocity, viscosity, depth) and sediment heterogeneity (particle size, density, shape). Although particle shape is recognized to be a significant factor in the hydrodynamic behavior of grains, this parameter is not currently implemented in bedload transport formulations: firstly because the mechanisms of initiation of motion according to particle shape are still not fully understood, and secondly due to the difficulties in defining common shape parameters. In March 2011, a large panel of in-situ instruments was deployed on two sites in the Eastern English Channel, during the sea campaign MESFLUX11. Samples of the sediment cover available for transport are collected, during a slack period, per 2cm thick strata by divers and by using a Shipeck grab. Bedload discharges along a tidal cycle are also collected with a Delft Nile Sampler (DNS; Gaweesh and Van Rijn, 1992, 1994) on both sites. The first one is characterized by a sandy bed with a low size dispersion, while the other study area implies graded sediments from fine sands to granules. A detailed analysis of the data is performed to follow the evolution of in-situ bedload fluxes on the seabed for a single current. In-situ measurements are compared to existing formulations according to a single fraction approach, using the median diameter of the mixture, and a fractionwise approach, involving a discretization of the grading curve. Results emphasize the interest to oscillate between these two methods according to the dispersion in size of the site considered. The need to apply a hiding/exposure coefficient (Egiazaroff, 1965) and a hindrance factor (Kleinhans and Van Rijn, 2002) for size heterogeneous sediments is also clearly highlighted. A really good

  19. Controls of tectonics and sediment source locations on along-strike variations in transgressive deposits on the northern California margin

    Science.gov (United States)

    Spinelli, G.A.; Field, M.E.

    2003-01-01

    We identify two surfaces in the shallow subsurface on the Eel River margin offshore northern California, a lowstand erosion surface, likely formed during the last glacial maximum, and an overlying surface likely formed during the most recent transgression of the shoreline. The lowstand erosion surface, which extends from the inner shelf to near the shelfbreak and from the Eel River to Trinidad Head (???80 km), truncates underlying strata on the shelf. Above the surface, inferred transgressive coastal and estuarine sedimentary units separate it from the transgressive surface on the shelf. Early in the transgression, Eel River sediment was likely both transported down the Eel Canyon and dispersed on the slope, allowing transgressive coastal sediment from the smaller Mad River to accumulate in a recognizable deposit on the shelf. The location of coastal Mad River sediment accumulation was controlled by the location of the paleo-Mad River. Throughout the remainder of the transgression, dispersed sediment from the Eel River accumulated an average of 20 m of onlapping shelf deposits. The distribution and thickness of these transgressive marine units was strongly modified by northwest-southeast trending folds. Thick sediment packages accumulated over structural lows in the lowstand surface. The thinnest sediment accumulations (0-10 m) were deposited over structural highs along faults and uplifting anticlines. The Eel margin, an active margin with steep, high sediment-load streams, has developed a thick transgressive systems tract. On this margin sediment accumulates as rapidly as the processes of uplift and downwarp locally create and destroy accommodation space. Sequence stratigraphic models of tectonically active margins should account for variations in accommodation space along margins as well as across them. ?? 2003 Elsevier Science B.V. All rights reserved.

  20. ESTIMATION OF THE WANDA GLACIER (SOUTH SHETLANDS SEDIMENT EROSION RATE USING NUMERICAL MODELLING

    Directory of Open Access Journals (Sweden)

    Kátia Kellem Rosa

    2013-09-01

    Full Text Available Glacial sediment yield results from glacial erosion and is influenced by several factors including glacial retreat rate, ice flow velocity and thermal regime. This paper estimates the contemporary subglacial erosion rate and sediment yield of Wanda Glacier (King George Island, South Shetlands. This work also examines basal sediment evacuation mechanisms by runoff and glacial erosion processes during the subglacial transport. This is small temperate glacier that has seen retreating for the last decades. In this work, we examine basal sediment evacuation mechanisms by runoff and analyze glacial erosion processes occurring during subglacial transport. The glacial erosion rate at Wanda Glacier, estimated using a numerical model that consider sediment evacuated to outlet streams, ice flow velocity, ice thickness and glacier area, is 1.1 ton m yr-1.

  1. Sediment contributions from floodplains and legacy sediments to Piedmont streams of Baltimore County, Maryland

    Science.gov (United States)

    Donovan, Mitchell; Miller, Andrew; Baker, Matthew; Gellis, Allen C.

    2015-01-01

    Disparity between watershed erosion rates and downstream sediment delivery has remained an important theme in geomorphology for many decades, with the role of floodplains in sediment storage as a common focus. In the Piedmont Province of the eastern USA, upland deforestation and agricultural land use following European settlement led to accumulation of thick packages of overbank sediment in valley bottoms, commonly referred to as legacy deposits. Previous authors have argued that legacy deposits represent a potentially important source of modern sediment loads following remobilization by lateral migration and progressive channel widening. This paper seeks to quantify (1) rates of sediment remobilization from Baltimore County floodplains by channel migration and bank erosion, (2) proportions of streambank sediment derived from legacy deposits, and (3) potential contribution of net streambank erosion and legacy sediments to downstream sediment yield within the Mid-Atlantic Piedmont.We calculated measurable gross erosion and deposition rates within the fluvial corridor along 40 valley segments from 18 watersheds with drainage areas between 0.18 and 155 km2 in Baltimore County, Maryland. We compared stream channel and floodplain morphology from lidar-based digital elevation data collected in 2005 with channel positions recorded on 1:2400 scale topographic maps from 1959–1961 in order to quantify 44–46 years of channel change. Sediment bulk density and particle size distributions were characterized from streambank and channel deposit samples and used for volume to mass conversions and for comparison with other sediment sources.Average annual lateral migration rates ranged from 0.04 to 0.19 m/y, which represented an annual migration of 2.5% (0.9–4.4%) channel width across all study segments, suggesting that channel dimensions may be used as reasonable predictors of bank erosion rates. Gross bank erosion rates varied from 43 to 310 Mg/km/y (median = 114) and

  2. Elementary theory of bed-sediment entrainment by debris flows and avalanches

    Science.gov (United States)

    Iverson, Richard M.

    2012-01-01

    Analyses of mass and momentum exchange between a debris flow or avalanche and an underlying sediment layer aid interpretations and predictions of bed-sediment entrainment rates. A preliminary analysis assesses the behavior of a Coulomb slide block that entrains bed material as it descends a uniform slope. The analysis demonstrates that the block's momentum can grow unstably, even in the presence of limited entrainment efficiency. A more-detailed, depth-integrated continuum analysis of interacting, deformable bodies identifies mechanical controls on entrainment efficiency, and shows that entrainment rates satisfy a jump condition that involves shear-traction and velocity discontinuities at the flow-bed boundary. Explicit predictions of the entrainment rateEresult from making reasonable assumptions about flow velocity profiles and boundary shear tractions. For Coulomb-friction tractions, predicted entrainment rates are sensitive to pore fluid pressures that develop in bed sediment as it is overridden. In the simplest scenario the bed sediment liquefies completely, and the entrainment-rate equation reduces toE = 2μ1gh1 cos θ(1 − λ1)/ , where θ is the slope angle, μ1 is the flow's Coulomb friction coefficient, h1 is its thickness, λ1 is its degree of liquefaction, and is its depth-averaged velocity. For values ofλ1ranging from 0.5 to 0.8, this equation predicts entrainment rates consistent with rates of 0.05 to 0.1 m/s measured in large-scale debris-flow experiments in which wet sediment beds liquefied almost completely. The propensity for bed liquefaction depends on several factors, including sediment porosity, permeability, and thickness, and rates of compression and shear deformation that occur when beds are overridden.

  3. Early Paleozoic dioritic and granitic plutons in the Eastern Tianshan Orogenic Belt, NW China: Constraints on the initiation of a magmatic arc in the southern Central Asian Orogenic Belt

    Science.gov (United States)

    Du, Long; Long, Xiaoping; Yuan, Chao; Zhang, Yunying; Huang, Zongying; Sun, Min; Zhao, Guochun; Xiao, Wenjiao

    2018-03-01

    Early Paleozoic dioritic and granitic plutons in the Eastern Tianshan Orogenic Belt (ETOB) have been studied in order to constraint the initiation of a magmatic arc formed in this region. Zircon U-Pb dating indicates that two dioritic plutons in the northern ETOB were generated in the Late Ordovician (452 ± 4 Ma) and the Early Silurian (442 ± 3 Ma), respectively. Diorites from the two plutons are characterized by enrichments in large ion lithophile elements (LILE) and highly incompatible elements, with depletions in high field strength elements (HSFE) displaying typical geochemical features of a subduction-related origin. They have positive εNd(t) values (+5.08-+6.58), relatively young Nd model ages (TDM = 0.71-1.08 Ga), with Ta/Yb (0.05-0.09) and Nb/Ta ratios (12.06-15.19) similar to those of depleted mantle, suggesting a juvenile mantle origin. Their high Ba/La (13.3-35.9), low Th/Yb (0.72-2.02), and relatively low Ce/Th (4.57-14.7) and Ba/Th (47.8-235) ratios indicate that these diorites were probably produced by partial melting of a depleted mantle wedge metasomatized by both subducted sediment-derived melts and slab-derived aqueous fluids. Zircon U-Pb dating of a granitic pluton in the northern ETOB yielded a Late Ordovician intrusion age of 447 ± 5 Ma. Granites from this pluton show calc-alkaline compositions with geochemical characteristics of I-type granites. They also show positive εNd(t) values (+6.49-+6.95) and young Nd model ages (TDM = 0.69-0.87 Ga), indicating that the granites were most likely derived from juvenile lower crust. Our new dating results on the dioritic and granitic plutons suggest that arc-type magmatism in the northern ETOB began prior to or at the Late Ordovician (452-442 Ma). In addition, north-dipping subduction of the Kangguertage oceanic lithosphere may account for the arc-type magmatism and the geodynamic process of the ETOB in the Early Paleozoic.

  4. Environmental magnetic methods for detecting and mapping contaminated sediments in lakes

    Science.gov (United States)

    Boyce, J. I.

    2009-05-01

    The remediation of contaminated sediments is an urgent environmental priority in the Great Lakes and requires detailed mapping of impacted sediment layer thickness, areal distribution and pollutant levels. Magnetic property measurements of sediment cores from two heavily polluted basins in Lake Ontario (Hamilton Harbour, Frenchman's Bay) show that concentrations of hydrocarbons (PAH) and a number of heavy metals (Pb, As, Ni, Cu, Cr, Zn, Cd, Fe) are strongly correlated with magnetic susceptibility. The magnetic susceptibility contrast between the contaminated sediment and underlying 'pre-colonial' sediments is sufficient to generate a total field anomaly (ca. 2-20 nT) that can be measured with a magnetometer towed above the lake bed. Systematic magnetic surveying (550 line km) of Hamilton Harbour using a towed marine magnetometer clearly identifies a number of well-defined magnetic anomalies that coincide with known accumulations of contaminated lake sediment. When calibrated against in-situ magnetic property measurements, the modeled apparent susceptibility from magnetic survey results can be used to classify the relative contaminant impact levels. The results demonstrate the potential of magnetic property measurements for rapid reconnaissance mapping of large areas of bottom contamination prior to detailed coring and sediment remediation.

  5. Stochastic Modelling of the Hydraulic Anisotropy of Ash Impoundment Sediment

    Science.gov (United States)

    Slávik, Ivan

    2017-12-01

    In the case reported here the impoundments of a 400 MW coal heated power plant with an annual production of about 1.5 million tons of fuel ash are of the cross-valley type, operated by the simple and cheap „upstream method”. The aim of the research was to determine overall and local values of the permeability in horizontal as well as in vertical direction and the anisotropy of the thin-layered sedimented ash. The coal ashes are hydraulically transported through pipelines in form of a slurry and periodically floated on the beach of the impoundment. The ashes are deposited in the form of a thin-layered sediment, with random alternation of layers with a coarser or finer granularity. The ash impoundment sediment is anthropogenic sediment with horizontally laminated texture. Therefore, the sediment is anisotropic from the viewpoint of water seepage. The knowledge of the permeability and the seepage anisotropy of the sediment is a basic requirement for the design of an appropriate dewatering system. The seepage anisotropy of the ash sediment has been checked by means of stochastic modelling, based on the correlation between the effective grain diameter and the coefficient of permeability of the ash: the effective grain diameter and the thickness of individual layers have been proposed to be random events.

  6. The effects of post-accretion sedimentation on the magnetization of oceanic crust

    Science.gov (United States)

    Dyment, J.; Granot, R.

    2016-12-01

    The presence of marine magnetic anomalies related to seafloor spreading is often considered a key evidence to locate the continent-ocean boundary (COB) at passive margins. Conversely, thermal demagnetization is also advocated to explain the poor shape of such oceanic anomalies under thick sedimentary cover. To investigate the effects of post-accretion sedimentation on marine magnetic anomalies, we focus our study on two conjugate regions of the southern South Atlantic Ocean (Anomalies M4 to M0) that, although formed at the same time and along the same spreading segments, reveal contrasting characters. The anomalies exhibit strong amplitudes (>400 nT) and a well-marked shape off South Africa, where the sediments are less than 3 km-thick, but become weaker ( 200 nT) and much smoother off northern Argentina, where the sedimentary cover is thicker than 5 km. We interpret this observation as reflecting thermal demagnetization of the extrusive layer and its low Curie temperature titanomagnetite. We perform a series of thermo-magnetic models (Dyment and Arkani-Hamed, Geophys. J. Int., 1995, modified to include the sedimentary cover) to simulate the acquisition and loss of remanent magnetization in the oceanic lithosphere. We assume that most of the sediments accumulated shortly after crustal accretion. We investigate a range of possible thermal demagnetization temperatures for the extrusive layer and find that 200°C to 280ºC best explains the observations, in reasonable agreement with Curie temperatures of titanomagnetite, suggesting that most of the extrusive layer may be demagnetized under sediments thicker than 5 km. Thermal demagnetization should therefore be considered while interpreting marine magnetic anomalies for the age and nature of the crust (i.e., continental versus oceanic) in regions with thick sedimentary cover.

  7. 20th-century glacial-marine sedimentation in Vitus Lake, Bering Glacier, Alaska, U.S.A.

    Science.gov (United States)

    Molnia, B.F.; Post, A.; Carlson, P.R.

    1996-01-01

    Vitus Lake, the ice-marginal basin at the southeastern edge of Bering Glacier, Alaska, U.S.A., is a site of modern, rapid, glacial-marine sedimentation. Rather than being a fresh-water lake, Vitus Lake is a tidally influenced, marine to brackish embayment connected to the Pacific Ocean by an inlet, the Seal River. Vitus Lake consists of five deep bedrock basins, separated by interbasinal highs. Glacial erosion has cut these basins as much as 250 m below sea level. High-resolution seismic reflection surveys conducted in 1991 and 1993 of four of Vitus Lake's basins reveal a complex, variable three-component acoustic stratigraphy. Although not fully sampled, the stratigraphy is inferred to be primarily glacial-marine units of (1) basal contorted and deformed glacial-marine and glacial sediments deposited by basal ice-contact processes and submarine mass-wasting; (2) acoustically well-stratified glacial-marine sediment, which unconformably overlies the basal unit and which grades upward into (3) acoustically transparent or nearly transparent glacial-marine sediment. Maximum thicknesses of conformable glacial-marine sediment exceed 100 m. All of the acoustically transparent and stratified deposits in Vitus Lake are modern in age, having accumulated between 1967 and 1993. The basins where these three-part sequences of "present-day" glacial-marine sediment are accumulating are themselves cut into older sequences of stratified glacial and glacial-marine deposits. These older units outcrop on the islands in Vitus Lake. In 1967, as the result of a major surge, glacier ice completely filled all five basins. Subsequent terminus retreat, which continued through August 1993, exposed these basins, providing new locations for glacial-marine sediment accumulation. A correlation of sediment thicknesses measured from seismic profiles at specific locations within the basins, with the year that each location became ice-free, shows that the sediment accumulation at some locations

  8. Rb-Sr ages and initial 87Sr/86Sr ratios of late paleozoic granitic rocks from northern Chile

    International Nuclear Information System (INIS)

    Shibata, Ken; Ishihara, Shunso; Ulriksen, C.E.

    1984-01-01

    Rb-Sr whole-rock isochron ages were determined on three suites of so-called Paleozoic granitic rocks from northern coastal Chile. The granitic rocks from the Valparaiso and Ci Funcho areas are dated as 296.3 +- 5.4 Ma and 262.2 +- 4.6 Ma, respectively, which are in accord with geologically estimated age. The rocks from the Chanaral area is dated as 212.8 +- 8.6 Ma, which is correlated close to the Triassic-Jurassic boundary age. A K-Ar age of 196 +- 6 Ma was obtained on biotite in granite from Esmeralda between Ci Funcho and Chanaral. These age results demonstrate that no Precambrian plutonism occurred in the studied area, and that so-called Paleozoic granitic rocks in the Ci Funcho-Chanaral area are divided into Permian and early Mesozoic in age. Initial 87 Sr/ 86 Sr ratios of the ilmenite-series granitic rocks from the coastal region are 0.70641 (Valparaiso), 0.70635 (Ci Funcho) and 0.70455 (Chanaral). These relatively low ratios deny substantial crustal contribution to the granitoids. The initial ratios of magnetite-series granitoids from porphyry- and manto-type mineralized areas (Chiquicamata, El Salvador and Tocopilla) are as low as 0.70344 to 0.70464. (author)

  9. Explorability and predictability of the paleozoic sedimentary sequence beneath the Bruce nuclear site

    International Nuclear Information System (INIS)

    Parmenter, A.; Jensen, M.; Crowe, R.; Raven, K.

    2011-01-01

    Ontario Power Generation (OPG) is proposing to develop a Deep Geologic Repository (DGR) for the long-term management of its Low and Intermediate Level Waste (L&ILW) at the Bruce nuclear site located in the Municipality of Kincardine, Ontario. A 4-year program of geoscientific studies to assess the suitability of the 850 m thick Palaeozoic age sedimentary sequence beneath the site to host the DGR was completed in 2010. The studies provide evidence of a geologic setting in which the DGR concept would be safely implemented at a nominal depth of 680 m within the argillaceous limestone of the Cobourg Formation. This paper describes the geologic framework of the Bruce nuclear site with a focus on illustrating the high degree of stratigraphic continuity and traceability at site-specific and regional scales within the Ordovician sediments proposed to host and enclose the DGR. As part of the site-specific studies, a program of deep drilling/coring (6 boreholes) and in-situ testing through the sedimentary sequence was completed from 4 drill sites situated beyond the DGR footprint, approximately 1 km apart. Core logging reveals that the stratigraphic sequence comprises 34 distinct bedrock formations/members/units consistent with the known regional stratigraphic framework. These layered sedimentary formations dip 0.6 o (~10 m/km) to the southwest with highly uniform thicknesses both at the site- and regional-scale, particularly, the Ordovician sediments, which vary on the order of metres. The occurrence of steeply-dipping faults within the sedimentary sequence is not revealed through surface outcrop fracture mapping, micro-seismic (M ≥ 1) monitoring, inclined borehole coring or intersection of hydrothermal type dolomitized reservoir systems. Potential fault structures, interpreted from a 2-D seismic survey, were targeted by angled boreholes which found no evidence for their existence. Formation specific continuity is also evidence by the lateral traceability of physical rock

  10. Choroidal Thickness Changes in the Acute Attack Period in Patients with Familial Mediterranean Fever.

    Science.gov (United States)

    Gundogan, Fatih C; Akay, Fahrettin; Uzun, Salih; Ozge, Gokhan; Toyran, Sami; Genç, Halil

    2016-01-01

    The aim of this study was to evaluate choroidal thickness changes during acute attacks of familial Mediterranean fever (FMF). Fifty patients with FMF and 50 healthy controls were included. Choroidal thickness of each participant was measured at the foveola and horizontal nasal and temporal quadrants at 500-µm intervals to 1,500 µm from the foveola using spectral-domain optical coherence tomography. White blood cell count, erythrocyte sedimentation rate (ESR) and serum levels of fibrinogen and C-reactive protein (CRP) were evaluated. The clinical findings (peritonitis, arthritis and pleuritis) were noted. Choroidal thickness was significantly thicker at all measurement points in FMF patients compared to healthy controls during an acute attack (p 0.05). Increased choroidal thickness in the acute phase of FMF is possibly related to the inflammatory edematous changes in the choroid. © 2015 S. Karger AG, Basel.

  11. Sediment distribution and hydrologic conditions of the Potomac aquifer in Virginia and parts of Maryland and North Carolina

    Science.gov (United States)

    McFarland, Randolph E.

    2013-01-01

    Sediments of the heavily used Potomac aquifer broadly contrast across major structural features of the Atlantic Coastal Plain Physiographic Province in eastern Virginia and adjacent parts of Maryland and North Carolina. Thicknesses and relative dominance of the highly interbedded fluvial sediments vary regionally. Vertical intervals in boreholes of coarse-grained sediment commonly targeted for completion of water-supply wells are thickest and most widespread across the central and southern parts of the Virginia Coastal Plain. Designated as the Norfolk arch depositional subarea, the entire sediment thickness here functions hydraulically as a single interconnected aquifer. By contrast, coarse-grained sediment intervals are thinner and less widespread across the northern part of the Virginia Coastal Plain and into southern Maryland, designated as the Salisbury embayment depositional subarea. Fine-grained intervals that are generally avoided for completion of water-supply wells are increasingly thick and widespread northward. Fine-grained intervals collectively as thick as several hundred feet comprise two continuous confining units that hydraulically separate three vertically spaced subaquifers. The subaquifers are continuous northward but merge southward into the single undivided Potomac aquifer. Lastly, far southeastern Virginia and northeastern North Carolina are designated as the Albemarle embayment depositional subarea, where both coarse- and fine-grained intervals are of only moderate thickness. The entire sediment thickness functions hydraulically as a single interconnected aquifer. A substantial hydrologic separation from overlying aquifers is imposed by the upper Cenomanian confining unit. Potomac aquifer sediments were deposited by a fluvial depositional complex spanning the Virginia Coastal Plain approximately 100 to 145 million years ago. Westward, persistently uplifted granite and gneiss source rocks sustained a supply of coarse-grained sand and gravel

  12. Uranium hydrogeochemical and stream sediment reconnaissance of the Gillette NTMS quadrangle, Wyoming, including concentrations of forty-two additional elements

    International Nuclear Information System (INIS)

    Warren, R.G.; George, W.E.; Minor, M.M.; Simi, O.R.; Talcott, C.L.; Hensley, W.K.; Cheadle, J.M. III.

    1980-08-01

    During 1976 and 1977, 752 water and 843 sediment samples were collected from 1419 locations within the 17 700-km 2 area of the Gillette quadrangle, Wyoming. Water samples were collected primarily from wells, and also from springs, ponds, and streams; sediment samples were collected primarily from stream channels, and also from springs and ponds. Each water sample was analyzed for uranium and each sediment sample was analyzed for 43 elements, including uranium and thorium. Uranium concentrations in water samples range from below the detection limit of 0.02 to 212.20 ppB and have a median of 1.10 ppB. The highest background uranium concentrations, as well as the highest individual uranium values, are in areas where favorable host units for uranium mineralization crop out. These units are the Wasatch and Fort Union formations in the Powder River Basin and the Inyan Kara group in the Black Hills. Uranium concentrations in sediment samples range from 0.64 to 29.83 ppM and have a median of 3.24 ppM. Background uranium concentrations are strongly controlled by the exposed geologic unit, and range from 4 to 8 ppM for the Cretaceous Colorado group to 1 to 3 ppM for the Triassic and Paleozoic units exposed in the Black Hills. Several areas where the Wasatch and Fort Union formations are exposed exhibit uranium concentrations in sediment samples that are slightly, but distinctly, above background values for these units. All of these areas are also associated with notably high uranium concentrations in water samples. Because epigenetic uranium mineralization in economically important areas can exhibit a similar geochemical signature, these areas within the Gillette quadrangle should be further examined for the possible presence of uranium mineralization

  13. Generation of net sediment transport by velocity skewness in oscillatory sheet flow

    Science.gov (United States)

    Chen, Xin; Li, Yong; Chen, Genfa; Wang, Fujun; Tang, Xuelin

    2018-01-01

    This study utilizes a qualitative approach and a two-phase numerical model to investigate net sediment transport caused by velocity skewness beneath oscillatory sheet flow and current. The qualitative approach is derived based on the pseudo-laminar approximation of boundary layer velocity and exponential approximation of concentration. The two-phase model can obtain well the instantaneous erosion depth, sediment flux, boundary layer thickness, and sediment transport rate. It can especially illustrate the difference between positive and negative flow stages caused by velocity skewness, which is considerably important in determining the net boundary layer flow and sediment transport direction. The two-phase model also explains the effect of sediment diameter and phase-lag to sediment transport by comparing the instantaneous-type formulas to better illustrate velocity skewness effect. In previous studies about sheet flow transport in pure velocity-skewed flows, net sediment transport is only attributed to the phase-lag effect. In the present study with the qualitative approach and two-phase model, phase-lag effect is shown important but not sufficient for the net sediment transport beneath pure velocity-skewed flow and current, while the asymmetric wave boundary layer development between positive and negative flow stages also contributes to the sediment transport.

  14. Paleozoic evolution of active margin basins in the southern Central Andes (northwestern Argentina and northern Chile)

    Science.gov (United States)

    Bahlburg, H.; Breitkreuz, C.

    The geodynamic evolution of the Paleozoic continental margin of Gondwana in the region of the southern Central Andes is characterized by the westward progression of orogenic basin formation through time. The Ordovician basin in the northwest Argentinian Cordillera Oriental and Puna originated as an Early Ordovician back-arc basin. The contemporaneous magmatic arc of an east-dipping subduction zone was presumably located in northern Chile. In the back-arc basin, a ca. 3500 meter, fining-up volcaniclastic apron connected to the arc formed during the Arenigian. Increased subsidence in the late Arenigian allowed for the accomodation of large volumes of volcaniclastic turbidites during the Middle Ordovician. Subsidence and sedimentation were caused by the onset of collision between the para-autochthonous Arequipa Massif Terrane (AMT) and the South American margin at the Arenigian-Llanvirnian transition. This led to eastward thrusting of the arc complex over its back-arc basin and, consequently, to its transformation into a marine foreland basin. As a result of thrusting in the west, a flexural bulge formed in the east, leading to uplift and emergence of the Cordillera Oriental shelf during the Guandacol Event at the Arenigian-Llanvirnian transition. The basin fill was folded during the terminal collision of the AMT during the Oclóyic Orogeny (Ashgillian). The folded strata were intruded post-tectonically by the presumably Silurian granitoids of the "Faja Eruptiva de la Puna Oriental." The orogeny led to the formation of the positive area of the Arco Puneño. West of the Arco Puneño, a further marine basin developed during the Early Devonian, the eastern shelf of which occupied the area of the Cordillera Occidental, Depresión Preandina, and Precordillera. The corresponding deep marine turbidite basin was located in the region of the Cordillera de la Costa. Deposition continued until the basin fill was folded in the early Late Carboniferous Toco Orogeny. The basin

  15. Chloride, bromide and iodide distributions in Loch Lomond sediment interstitial water

    International Nuclear Information System (INIS)

    MacKenzie, A.B.; Shimmield, T.M.; Scott, R.D.; Davidson, C.M.; Hooker, P.J.

    1991-01-01

    The post glacial sediments of Loch Lomond contain a well defined band of marine deposited material which is overlain and underlain by freshwater deposited sediment. The chronology of the sedimentary sequence has been well established by radiocarbon dating and, in the southern basin of the Loch, the marine sediment band is of the order of 1 m thick and typically occurs at a depth of about 3 to 4 m beneath the sediment surface. Previous work has established that the marine deposited sediment contains enhanced concentrations of iodine and bromine relative to the contiguous freshwater sediments and that dissolution of halogen elements from the marine sediments generates a concentration gradient, with consequent diffusive transport, of these elements in the sediment interstitial water. This environment is thus highly suitable for investigation of the rate of transport of halogen elements through the sediment a topic of direct relevance to radioactive waste disposal in the context of far field migration of 129 I. Previous studies resulted in successful modelling of the diffusive transport of bromine in the interstitial water of the sediment on the basis of the observed concentration profile for total bromine in the water. This work was, however, of restricted value since (1) speciation was not determined (2) archived sediment was used and (3) samples were processed and analyzed under ambient laboratory conditions. The objective of the work described in this report was to collect a new core of Loch Lomond sediment and to carry out appropriate analyses to overcome the above limitations

  16. Coupled penetrometer, MBES and ADCP assessments of tidal variations of the surface sediment layer along active subaqueous dunes, Danish Wadden Sea

    DEFF Research Database (Denmark)

    Stark, Nina; Hanff, Henrik; Svenson, Christian

    2011-01-01

    In-situ geotechnical measurements of surface sediments were carried out along large subaqueous dunes in the Knudedyb tidal inlet channel in the DanishWadden Sea using a small free-falling penetrometer. Vertical profiles showed a typical stratification pattern with a resolution of ~1 cm depicting...... a thin surface layer of low sediment strength and a stiffer substratum below (quasi-static bearing capacity equivalent: 1–3 kPa in the top layer, 20–140 kPa in the underlying sediment; thickness of the top layer ca. 5–8 cm). Observed variations in the thickness and strength of the surface layer during...... a tidal cycle were compared to mean current velocities (measured using an acoustic Doppler current profiler, ADCP), high-resolution bathymetry (based on multibeam echo sounding, MBES) and qualitative estimates of suspended sediment distributions in the water column (estimated from ADCP backscatter...

  17. Sedimentological analysis and bed thickness statistics from a Carboniferous deep-water channel-levee complex: Myall Trough, SE Australia

    Science.gov (United States)

    Palozzi, Jason; Pantopoulos, George; Maravelis, Angelos G.; Nordsvan, Adam; Zelilidis, Avraam

    2018-02-01

    This investigation presents an outcrop-based integrated study of internal division analysis and statistical treatment of turbidite bed thickness applied to a Carboniferous deep-water channel-levee complex in the Myall Trough, southeast Australia. Turbidite beds of the studied succession are characterized by a range of sedimentary structures grouped into two main associations, a thick-bedded and a thin-bedded one, that reflect channel-fill and overbank/levee deposits, respectively. Three vertically stacked channel-levee cycles have been identified. Results of statistical analysis of bed thickness, grain-size and internal division patterns applied on the studied channel-levee succession, indicate that turbidite bed thickness data seem to be well characterized by a bimodal lognormal distribution, which is possibly reflecting the difference between deposition from lower-density flows (in a levee/overbank setting) and very high-density flows (in a channel fill setting). Power law and exponential distributions were observed to hold only for the thick-bedded parts of the succession and cannot characterize the whole bed thickness range of the studied sediments. The succession also exhibits non-random clustering of bed thickness and grain-size measurements. The studied sediments are also characterized by the presence of statistically detected fining-upward sandstone packets. A novel quantitative approach (change-point analysis) is proposed for the detection of those packets. Markov permutation statistics also revealed the existence of order in the alternation of internal divisions in the succession expressed by an optimal internal division cycle reflecting two main types of gravity flow events deposited within both thick-bedded conglomeratic and thin-bedded sandstone associations. The analytical methods presented in this study can be used as additional tools for quantitative analysis and recognition of depositional environments in hydrocarbon-bearing research of ancient

  18. A-type granitoid in Hasansalaran complex, northwestern Iran: Evidence for extensional tectonic regime in northern Gondwana in the Late Paleozoic

    Science.gov (United States)

    Azizi, Hossein; Kazemi, Tahmineh; Asahara, Yoshihiro

    2017-07-01

    The Hasansalaran plutonic complex is one of the main intrusive bodies with a wide range of granite, monzonite, diorite and syenite that crop out in northwest Iran. This body includes Paleozoic granitoids that are surrounded and cut by Cretaceous granitoids. Zircon U-Pb age dating shows that the crystallization of this body occurred at 360 Ma ago in the Early Carboniferous. Whole rock compositions of the investigated intrusive body, show high contents of Ga (11.1-76.3 ppm), Zr (73.5-1280 ppm), Zn (43.7-358 ppm), Y(17.9-177 ppm), enrichment of rare earth elements (REEs) together with high Ga/Al ratios and a strong Eu negative anomaly, fairly consistent with typical A-type signature. The low εNd(t = 360 Ma) value (model for evolution of northwest Iran in the Late Paleozoic. Based on our model, the upwelling of a mantle plume, probably due to the proto-Tethys oceanic rollback activity beneath northern Gondwana, had a crucial role in the uplifting of the continental crust and resulted in the crystallization of A-type granitoids with some gabbroic rocks in northwest Iran.

  19. Petrological and geochemical features of the early Paleozoic granitic gneisses and iron ores in the Tianhu iron deposit, Eastern Tianshan, NW China: Implications for ore genesis

    Science.gov (United States)

    Zheng, Jiahao; Mao, Jingwen; Yang, Fuquan; Chai, Fengmei; Shen, Ping

    2017-08-01

    This paper reports whole-rock geochemical, zircon U-Pb and Hf isotopic data for ore-hosted granitic gneisses, mineral compositions of oxides, and sulfur isotopic data for sulfides in iron ores from the Tianhu deposit, central part of the Eastern Tianshan. Our results can provide crucial constraints on the genesis of granitic gneisses and early Paleozoic tectonic setting of the Eastern Tianshan. LA-ICP-MS U-Pb dating on magmatic zircons yielded weighted mean 206Pb/238U ages of 463 to 438 Ma, interpreted as the crystallization ages of the granitic protoliths and the formation ages of the Tianhu Group. Zircon U-Pb age of ore-hosted granitic gneiss (ca. 459 Ma) can provide reliable constrains on upper limit for iron mineralization age in the Tianhu deposit. Geochemical characteristics suggest that the protoliths of the Tianhu granitic gneisses are metaluminous to weakly peraluminous high-K calc-alkaline granitic rocks, exhibiting typical subduction-related features such as strong enrichment in LREE and LILE and depletion in HFSE. Zircon Hf isotopic compositions show a positive trend from 463 to 438 Ma, indicating that 460 Ma magmas came from both ancient and juvenile sources, whereas 438 Ma magmas involved more juvenile material. Some early Paleozoic granitoids were recently identified in the Eastern Tianshan with the ages between ca. 475 and ca. 425 Ma. The formation of these early Paleozoic granitoids was in response to subduction processes, suggesting that subduction of Junggar Ocean probably began in the Early Ordovician and lasted until Late Silurian. Pyrite and pyrrhotite in iron ores have δ34SCDT values from + 4.6 to + 15.7‰, which are consistent with the marine source, but inconsistent with the magmatic source or those involved evaporites in skarn iron deposit. Geological, geochemical, and isotopic data suggest that the Tianhu iron ores were formed by volcano-sedimentary processes in a subduction environment during the early Paleozoic time, and Tianhu is a

  20. Ice-Rich Yedoma Permafrost: A Synthesis of Circum-Arctic Distribution and Thickness

    Science.gov (United States)

    Strauss, J.; Fedorov, A. N.; Fortier, D.; Froese, D. G.; Fuchs, M.; Grosse, G.; Günther, F.; Harden, J. W.; Hugelius, G.; Kanevskiy, M. Z.; Kholodov, A. L.; Kunitsky, V.; Laboor, S.; Lapointe Elmrabti, L.; Rivkina, E.; Robinson, J. E.; Schirrmeister, L.; Shmelev, D.; Shur, Y.; Spektor, V.; Ulrich, M.; Veremeeva, A.; Walter Anthony, K. M.; Zimov, S. A.

    2015-12-01

    Vast portions of Arctic and sub-Arctic Siberia, Alaska and the Yukon Territory are covered by ice-rich silts that are penetrated by large ice wedges, resulting from syngenetic sedimentation and freezing. Accompanied by wedge-ice growth, the sedimentation process was driven by cold continental climatic and environmental conditions in unglaciated regions during the late Pleistocene, inducing the accumulation of the unique Yedoma permafrost deposits up to 50 meter thick. Because of fast incorporation of organic material into permafrost during formation, Yedoma deposits include low-decomposed organic matter. Moreover, ice-rich permafrost deposits like Yedoma are especially prone to degradation triggered by climate changes or human activity. When Yedoma deposits degrade, large amounts of sequestered organic carbon as well as other nutrients are released and become part of active biogeochemical cycling. This could be of global significance for the climate warming, as increased permafrost thaw is likely to cause a positive feedback loop. Therefore, a detailed assessment of the Yedoma deposit volume is of importance to estimate its potential future climate response. Moreover, as a step beyond the objectives of this synthesis study, our coverage (see figure for the Yedoma domain) and thickness estimation will provide critical data to refine the Yedoma permafrost organic carbon inventory, which is assumed to have freeze-locked between 83±12 and 129±30 gigatonnes (Gt) of organic carbon. Hence, we here synthesize data on the circum-Arctic and sub-Arctic distribution and thickness of Yedoma permafrost (see figure for the Yedoma domain) in the framework of an Action Group funded by the International Permafrost Association (IPA). The quantification of the Yedoma coverage is conducted by the digitization of geomorphological and Quaternary geological maps. Further data on Yedoma thickness is contributed from boreholes and exposures reported in the scientific literature.

  1. Radioactivity measurement of tsunami sediments due to the Great East Japan Earthquake in Miyagi prefecture

    International Nuclear Information System (INIS)

    Inoue, Chihiro; Joe, Seongjin

    2014-01-01

    The tsunami sediments and their directly under soils from 25 tsunami flooded areas in Miyagi prefecture after the Great East Japan Earthquake were analyzed quantitatively for radiocesium ( 134 Cs and 137 Cs) concentrations. It was found that the radiocesium released in the reactor accidents of the Fukushima Daiichi Nuclear Power Plant stayed for at least 6 months in the tsunami sediments layer of a few centimeter thickness. On the other hand, from the results of the radiocesium extraction test using the tsunami sediments and 3 kinds of inorganic solvents, it was also found that the radiocesium in the tsunami sediments passed ca. 6 months after fall was hardly eluted with rain water (pH 5.6 ∼ 7.0) and combined strongly with clay minerals in the tsunami sediments. (K. Kato)

  2. Equilibrium sampling of hydrophobic organic chemicals in sediments: challenges and new approaches

    DEFF Research Database (Denmark)

    Schaefer, S.; Mayer, Philipp; Becker, B.

    2015-01-01

    ) are considered to be the effective concentrations for diffusive uptake and partitioning, and they can be measured by equilibrium sampling. We have thus applied glass jars with multiple coating thicknesses for equilibrium sampling of HOCs in sediment samples from various sites in different German rivers...

  3. Evolutionary and ecological perspectives of Late Paleozoic ferns. Part III. Anachoropterid ferns (including Anachoropteris, Tubicaulis, the Sermayaceae, Kaplanopteridaceae and Psalixochlaenaceae)

    OpenAIRE

    Galtier, Jean; Phillips, Tom L.

    2014-01-01

    The anachoropterid ferns, previously assigned to the family Anachoropteridaceae, are a group of anatomically preserved late Paleozoic filicalean ferns characterized by a C-shaped foliar xylem with abaxially recurved arms (inversicatenalean anatomy) and two main protoxylem strands. The variously curved to strongly inrolled foliar xylem certainly reflects different evolutionary trends within the morphogenus Anachoropteris. The occurrence of two groups of Tubicaulis is supported by differences i...

  4. The Heart of China revisited: II Early Paleozoic (ultra)high-pressure and (ultra)high-temperature metamorphic Qinling orogenic collage

    Science.gov (United States)

    Bader, Thomas; Franz, Leander; Ratschbacher, Lothar; de Capitani, Christian; Webb, A. Alexander G.; Yang, Zhao; Pfänder, Jörg A.; Hofmann, Mandy; Linnemann, Ulf

    2013-07-01

    Orogens with multiple (ultra)high-pressure ((U)HP) and (ultra)high-temperature ((U)HT) metamorphic events provide a complex but telling record of oceanic and continental interaction. The Early Paleozoic history of the "Heart of China," the Qinling orogenic collage, offers snapshots of at least three (U)HP and two (U)HT metamorphic events. The preservation of remnants of both oceanic and continental domains together with a ≥110 Myr record of magmatism allows the reconstruction of the processes that resulted in this disparate metamorphism. Herein, we first illuminate the pressure-temperature-time (P-T-t) evolution of the Early Paleozoic (U)HP and (U)HT events by refining the petrographic descriptions and P-T estimates, assess published, and employ new U/Th-Pb zircon, monazite, and titanite, and 40Ar-39Ar phengite geochronology to date the magmatic and metamorphic events. Then we explore how the metamorphic and magmatic events are related tectonically and how they elucidate the affinities among the various complexes in the Qinling orogenic collage. We argue that a Meso-Neoproterozoic crustal fragment—the Qinling complex—localized subduction-accretion events that involved subduction, oceanic-arc formation, and back-arc spreading along its northern margin, and mtantle-wedge exhumation and spreading-ridge subduction along its southern margin.

  5. Tracer investigations of natural and polluted sea sediment movement; Badanie traserowe ruchu naturalnych i zanieczyszczonych osadow morskich

    Energy Technology Data Exchange (ETDEWEB)

    Pruszak, Z. [Polska Akademia Nauk, Gdansk (Poland). Inst. Budownictwa Wodnego; Wierzchnicki, R. [Institute of Nuclear Chemistry and Technology, Warsaw (Poland)

    1994-12-31

    Results of tracer investigations and bottom sediment movement analysis (natural and polluted) performed world-wide have been shown. Polish investigations have been compared to these results. A critical estimation and analysis of particular elements of sediment movement: thickness of the drag layer and various characteristics of bottom transport evaluated in different time-space scales has been performed. 14 refs, 9 figs.

  6. Estimating accumulation rates and physical properties of sediment behind a dam: Englebright Lake, Yuba River, northern California

    Science.gov (United States)

    Snyder, Noah P.; Rubin, David M.; Alpers, Charles N.; Childs, Jonathan R.; Curtis, Jennifer A.; Flint, Lorraine E.; Wright, Scott A.

    2004-01-01

    Studies of reservoir sedimentation are vital to understanding scientific and management issues related to watershed sediment budgets, depositional processes, reservoir operations, and dam decommissioning. Here we quantify the mass, organic content, and grain-size distribution of a reservoir deposit in northern California by two methods of extrapolating measurements of sediment physical properties from cores to the entire volume of impounded material. Englebright Dam, completed in 1940, is located on the Yuba River in the Sierra Nevada foothills. A research program is underway to assess the feasibility of introducing wild anadromous fish species to the river upstream of the dam. Possible management scenarios include removing or lowering the dam, which could cause downstream transport of stored sediment. In 2001 the volume of sediments deposited behind Englebright Dam occupied 25.5% of the original reservoir capacity. The physical properties of this deposit were calculated using data from a coring campaign that sampled the entire reservoir sediment thickness (6–32 m) at six locations in the downstream ∼3/4 of the reservoir. As a result, the sediment in the downstream part of the reservoir is well characterized, but in the coarse, upstream part of the reservoir, only surficial sediments were sampled, so calculations there are more uncertain. Extrapolation from one-dimensional vertical sections of sediment sampled in cores to entire three-dimensional volumes of the reservoir deposit is accomplished via two methods, using assumptions of variable and constant layer thickness. Overall, the two extrapolation methods yield nearly identical estimates of the mass of the reservoir deposit of ∼26 × 106 metric tons (t) of material, of which 64.7–68.5% is sand and gravel. Over the 61 year reservoir history this corresponds to a maximum basin-wide sediment yield of ∼340 t/km2/yr, assuming no contribution from upstream parts of the watershed impounded by other dams. The

  7. Thick-skinned tectonics in a Late Cretaceous-Neogene intracontinental belt (High Atlas Mountains, Morocco): The flat-ramp fault control on basement shortening and cover folding

    Science.gov (United States)

    Fekkak, A.; Ouanaimi, H.; Michard, A.; Soulaimani, A.; Ettachfini, E. M.; Berrada, I.; El Arabi, H.; Lagnaoui, A.; Saddiqi, O.

    2018-04-01

    Most of the structural studies of the intracontinental High Atlas belt of Morocco have dealt with the central part of the belt, whose basement does not crop out. Here we study the Alpine deformation of the North Subatlas Zone, which is the part of the Western High Atlas (WHA) Paleozoic Massif that involves both Paleozoic basement units and remnants of their Mesozoic-Cenozoic cover formations. Our aim is to better constrain the geometry and kinematics of the basement faults during the Alpine shortening. Based on detail mapping, satellite imagery and field observations, we describe an array of sub-equatorial, transverse and oblique faults between the WHA Axial Zone and the Haouz Neogene basin. They define a mosaic of basement blocks pushed upon one another and upon the Haouz basement along the North Atlas Fault (NAF). The Axial Zone makes up the hanging-wall of the Adassil-Medinet Fault (AMF) south of this mosaic. The faults generally presents flat-ramp-flat geometry linked to the activation of multiple décollement levels, either within the basement where its foliation is subhorizontal or within favourable cover formations (Jurassic evaporites, Lower Cretaceous silty red beds, Upper Cretaceous evaporitic marls, Neogene basal argillites). The occurrence of the North Atlas detachment (NAD) allowed folded pop-up units to develop in front of the propagating NAF. Shortening began as early as the Campanian-Maastrichtian along the AMF. The direction of the maximum horizontal stress rotated from NNE-SSW to NNW-SSE from the Maastrichtian-Paleocene to the Neogene. The amount of shortening reaches 20% in the Azegour transect. This compares with the shortening amount published for the central-eastern High Atlas, suggesting that similar structures characterize the Paleozoic basement all along the belt. The WHA thick-skinned tectonics evokes that of the frontal Sevier belt and of the external Western Alps, although with a much minor pre-inversion burial.

  8. Terminal zone glacial sediment transfer at a temperate overdeepened glacier system

    Science.gov (United States)

    Swift, D. A.; Cook, S. J.; Graham, D. J.; Midgley, N. G.; Fallick, A. E.; Storrar, R.; Toubes Rodrigo, M.; Evans, D. J. A.

    2018-01-01

    Continuity of sediment transfer through glacial systems is essential to maintain subglacial bedrock erosion, yet transfer at temperate glaciers with overdeepened beds, where subglacial fluvial sediment transport should be greatly limited by adverse slopes, remains poorly understood. Complex multiple transfer processes in temperate overdeepened systems has been indicated by the presence of large frontal moraine systems, supraglacial debris of mixed transport origin, thick basal ice sequences, and englacial thrusts and eskers. At Svínafellsjökull, thrusts comprising decimetre-thick debris-rich bands of stratified facies ice of basal origin, with a coarser size distribution and higher clast content than that observed in basal ice layers, contribute substantially to the transfer of subglacial material in the terminal zone. Entrainment and transfer of material occurs by simple shear along the upper surface of bands and by strain-induced deformation of stratified and firnified glacier ice below. Thrust material includes rounded and well-rounded clasts that are also striated, indicating that fluvial bedload is deposited as subglacial channels approach the overdeepening and then entrained along thrusts. Substantial transfer also occurs within basal ice, with facies type and debris content dependent on the hydrological connectedness of the adverse slope. A process model of transfer at glaciers with terminal overdeepenings is proposed, in which the geometry of the overdeepening influences spatial patterns of ice deformation, hydrology, and basal ice formation. We conclude that the significance of thrusting in maintaining sediment transfer continuity has likely been overlooked by glacier sediment budgets and glacial landscape evolution studies.

  9. Lithology and surficial sediment distribution: northern Hatteras Abyssal Plain

    International Nuclear Information System (INIS)

    Dickson, S.M.; Laine, E.P.; Friedrich, N.E.

    1985-01-01

    Surficial sediments of the LLWODP study area E-N3 have several common characteristics and a few anomalous features. All of the 26 surficial samples examined are Holocene in age. In E-N3, the Holocene sequence ranges from 12-90 cm. The sequence is composed primarily of brown foraminiferal lutite. The lutites show evidence of burrowing by benthic animals in the form of burrows infilled with sediment of a different color. Below the bioturbated lutites is a dark brown, iron-enriched horizon stratigraphically near (within a few centimeters of) the Pleistocene/Holocene boundary. The vertical extent of this unit, which ranges from 2-22 cm, varies systematically within the study area. The maximum thickness is found in a region most removed from the terrigenous sediment entry points. Fine-grained turbidity currents, an abyssal current, and a debris flow created the uncommon features of the surficial sediments. The areal extent of these deposits is estimated as 10% of the E-N3 region below 5300 m. The largest turbidite is probably greater than 2000 km 2 in extent. However, evidence of coarse-grained turbidity current activity in the Holocene is absent. Hemipelagic deposition during the Holocene has resulted in a texturally uniform sequence of surficial sediments. 22 references, 10 figures, 6 tables

  10. Sediment gravity flows triggered by remotely generated earthquake waves

    Science.gov (United States)

    Johnson, H. Paul; Gomberg, Joan S.; Hautala, Susan L.; Salmi, Marie S.

    2017-06-01

    Recent great earthquakes and tsunamis around the world have heightened awareness of the inevitability of similar events occurring within the Cascadia Subduction Zone of the Pacific Northwest. We analyzed seafloor temperature, pressure, and seismic signals, and video stills of sediment-enveloped instruments recorded during the 2011-2015 Cascadia Initiative experiment, and seafloor morphology. Our results led us to suggest that thick accretionary prism sediments amplified and extended seismic wave durations from the 11 April 2012 Mw8.6 Indian Ocean earthquake, located more than 13,500 km away. These waves triggered a sequence of small slope failures on the Cascadia margin that led to sediment gravity flows culminating in turbidity currents. Previous studies have related the triggering of sediment-laden gravity flows and turbidite deposition to local earthquakes, but this is the first study in which the originating seismic event is extremely distant (> 10,000 km). The possibility of remotely triggered slope failures that generate sediment-laden gravity flows should be considered in inferences of recurrence intervals of past great Cascadia earthquakes from turbidite sequences. Future similar studies may provide new understanding of submarine slope failures and turbidity currents and the hazards they pose to seafloor infrastructure and tsunami generation in regions both with and without local earthquakes.

  11. Non-halide sediments from the Loule diapir salt mine: characterization and environmental significance

    Science.gov (United States)

    Ribeiro, Carlos; Terrinha, Pedro; Andrade, Alexandre; Fonseca, Bruno; Caetano, Miguel; Neres, Marta; Font, Eric; Mirão, José; Dias, Cristina; Rosado, Lúcia; Maurer, Anne-France; Manhita, Ana

    2017-04-01

    The sedimentary record of the Mesozoic Algarve Basin (south Portugal) spans from the Triassic to the Lower Cretaceous. Following the initial phase of Pangaea breakup and the related continental sedimentation during the Triassic, the sedimentation evolved through transitional (Triassic-Jurassic transition) to marine (Jurassic) environments. During the Hettangian a thick sequence of evaporites deposited in the basin. Most of the occurrences of these deposits have undetermined volumes, due to the post depositional diapiric movements. At the central Algarve, under the town of Loulé, a salt wall of up to > 1 km across, > 3 km in length and > 2 km in height has been exploited for the chemical industry (Loulé Diapir - LD). Most of the sediments that constitute LD are halides (> 99% halite), the exception being a package of non-halide sediments, constituted by carbonates (dolomite and magnesite) and sulphates (anhydrite) in various proportions with a maximum thickness of 3 meters. This package has a distinctive mesoscopic aspect of three layers of approximately the same thickness, different colours and primary sedimentary structures: black-brow-grey, from bottom to top. The sediments of this package were studied with a multidisciplinary approach aiming their mineralogical and chemical characterization, the determination of the organic matter content and origin, as well as the characterization and understanding of the chemical processes that occurred during the emplacement and compression of the LD: (i) X-ray diffraction for the determination of the mineral phases present and semi-quantification using the RIR-Reference Intensity Ratio method; (ii) micro analysis of the mineralogical samples by Scanning Electron Microscopy coupled to Energy Dispersive Spectroscopy; (iii) REE content determination by ICP-MS; (iv) determination of the carbon content by CHN Elemental analysis; (v) determination of the organic matter content by elemental analysis and their composition by

  12. Backreef and beach carbonate sediments of the Red Sea, Saudi Arabia: impacts of reef geometry and currents on sediment composition

    KAUST Repository

    Missimer, T. M.

    2017-07-01

    Three sites in the Red Sea were investigated to assess the variability of composition in Holocene sediments of the backreef environment within 0–2 m of water depth. This is important because composition of the sediment is commonly used to estimate water depth in ancient carbonate rocks. The site located at the King Abdullah Economic City (Saudi Arabia) contains a fringing reef with the reef tract located very close to the beach at the north end, flaring to the south to produce a narrower backreef area compared to the other two sites. This geometry produces a north to south current with a velocity of up to 15 cm s−1, particularly during high onshore winds. The sediments contain predominantly non-skeletal grains, including peloids, coated grains, ooids, and grapestones that form on the bottom. The percentage of coralgal grains in the sediment was significantly lower than at the other two sites studied. Om Al Misk Island and Shoaiba have a much lower-velocity current within the backreef zone and contain predominantly coralgal sediments from the beach to the landward edge of the reef tract. The two locations containing the predominantly coralgal microfacies were statistically similar, but the King Abdullah Economic City site was statistically different despite having a similar water depth profile. Slight differences in reef configuration, including reef orientation and distance from the shore, can produce considerable differences in sediment thickness and composition within the backreef environment, which should induce caution in the interpretation of water depth in ancient carbonate rocks using composition.

  13. Backreef and beach carbonate sediments of the Red Sea, Saudi Arabia: impacts of reef geometry and currents on sediment composition

    Science.gov (United States)

    Missimer, T. M.; Al-Mashharawi, S.; Dehwah, A. H. A.; Coulibaly, K.

    2017-12-01

    Three sites in the Red Sea were investigated to assess the variability of composition in Holocene sediments of the backreef environment within 0-2 m of water depth. This is important because composition of the sediment is commonly used to estimate water depth in ancient carbonate rocks. The site located at the King Abdullah Economic City (Saudi Arabia) contains a fringing reef with the reef tract located very close to the beach at the north end, flaring to the south to produce a narrower backreef area compared to the other two sites. This geometry produces a north to south current with a velocity of up to 15 cm s-1, particularly during high onshore winds. The sediments contain predominantly non-skeletal grains, including peloids, coated grains, ooids, and grapestones that form on the bottom. The percentage of coralgal grains in the sediment was significantly lower than at the other two sites studied. Om Al Misk Island and Shoaiba have a much lower-velocity current within the backreef zone and contain predominantly coralgal sediments from the beach to the landward edge of the reef tract. The two locations containing the predominantly coralgal microfacies were statistically similar, but the King Abdullah Economic City site was statistically different despite having a similar water depth profile. Slight differences in reef configuration, including reef orientation and distance from the shore, can produce considerable differences in sediment thickness and composition within the backreef environment, which should induce caution in the interpretation of water depth in ancient carbonate rocks using composition.

  14. Effective control of modified palygorskite to NH4+-N release from sediment.

    Science.gov (United States)

    Chen, Lei; Zheng, Tianyuan; Zhang, Junjie; Liu, Jie; Zheng, Xilai

    2014-01-01

    Sediment capping is an in situ treatment technology that can effectively restrain nutrient and pollutant release from the sediment in lakes and reservoirs. Research on sediment capping has focused on the search for effective, non-polluting and affordable capping materials. The efficiency and mechanism of sediment capping with modified palygorskite in preventing sediment ammonia nitrogen (NH4+-N) release to surface water were investigated through a series of batch and sediment capping experiments. Purified palygorskite and different types of modified palygorskite (i.e. heated, acid-modified and NaCI-modified palygorskite) were used in this investigation. Factors affecting control efficiency, including the temperature, thickness and grain size of the capping layer, were also analysed. The batch tests showed that the adsorption of NH4+-N on modified palygorskite achieved an equilibration in the initial 45 min, and the adsorption isotherm followed the Freundlich equation. Sediment capping experiments showed that compared with non-capped condition, covering the sediment with modified palygorskite and sand both inhibited NH4+-N release to the overlying water. Given its excellent chemical stability and strong adsorption, heated palygorskite, which has a NH4+-N release inhibition ratio of 41.3%, is a more effective sediment capping material compared with sand. The controlling effectiveness of the modified palygorskite increases with thicker capping layer, lower temperature and smaller grain size of the capping material.

  15. Empirical relations of sediment transport prediction in Polish multibanks shore

    International Nuclear Information System (INIS)

    Pruszak, Z.

    1995-01-01

    Qualitative and quantitative description of various elements of bottom sediment movement in Polish multibanks coastal region has been down. Empirical relations linking transport velocity, thickness of the drag layer and the transport volume with the generating wave-current background have been presented. Practical engineering advices on performance of various reports concerning coastal engineering or coastal zone ecology. (author)

  16. Sedimentation and contamination patterns of dike systems along the Rhône River (France)

    Science.gov (United States)

    Seignemartin, Gabrielle; Tena, Alvaro; Piégay, Hervé; Roux, Gwenaelle; Winiarski, Thierry

    2017-04-01

    Humans have historically modified the Rhône River, especially in the last centuries. In the 19th century, the river was systematically embanked for flood protection purposes, and works continued along the 20th century with dike system engineering work for navigation. The Rhône was canalised and its historical course by-passed by a series of hydroelectric dams. Besides, industrial activity polluted the river. For example, high levels of PCB's were attributed to the inputs of the heavily industrialized zone downstream from Lyon. During floods, these contaminants, associated with the suspended sediment, were trapped by the engineering works and the floodplain. Currently, a master plan to reactivate the river dynamics in the alluvial margins by removing the groyne-fields and dikes in the by-passed sections is being implemented. Within this context, this work aims to assess historical dynamics of sediment and associated contaminants in the floodplain (e.g. trace metal elements), notably in the dike system, in order to evaluate the contamination risk related to bank protection removal. With this objective, a transversal methodology has been applied coupling GIS diachronic analysis (old maps, bathymetric data, Orthophotos, LIDAR, etc.) to understand the historical floodplain evolution, sediment survey to obtain sediment thickness (metal rod and Ground Penetrating Radar), and sediment sampling (manual auger and core sampling) to obtain the metal element concentrations (X-Ray Fluorescence and Inductively Coupled Plasma Mass Spectrometry). By this way, metal element patterns were defined and used as contamination tracing indicators to apprehend the contamination history but also as geochemical background indicators to define the sediment source influence. We found that sediment temporal patterns are directly related with the by-pass construction year. Spatially, fine sediment deposition predominates in the dike systems, being lower in the floodplain already disconnected in

  17. TECTONIC POSITION OF MARBLE MELANGES IN THE EARLY PALEOZOIC ACCRETION-COLLISIONAL SYSTEM OF THE WESTERN PRIBAIKALIE

    Directory of Open Access Journals (Sweden)

    V. S. Fedorovsky

    2014-01-01

    Full Text Available The Early Paleozoic collisional system located in the Olkhon region at the western shores of Lake Baikal resulted from collision of the Siberian paleocontinent and a complex aggregate composed by fragments of a microcontinent, island arcs, back-arc structures and accretionary prisms. The main events were associated with complete manifestation of shear tectogenesis initiated by oblique collision. The current structure includes tectonically displaced components of ancient geodynamic systems that used to have been located dozens and hundreds of kilometres apart. Horizontal amplitudes of tectonic displacement seem to have been quite high; however, numerical data are still lacking to support this conclusion. Information about the structure of the upper crust in the Paleozoic is also lacking as only deep metamorphic rocks (varying from epidote-amphibolite to granulite facies are currently outcropped. Formations comprising the collisional collage are significantly different in composition and protoliths, and combinations of numerous shifted beds give evidence of a 'bulldozer' effect caused by the collisional shock followed by movements of crushed components of the ocean-continent zone along the margin of the Siberian paleocontinent. As evidenced by the recent cross-section, deep horizons of the Early Paleozoic crust comprise the collisional system between the Siberian craton and the Olkhon composite terrain. A permanent inclusion in the collisional combinations of rocks are unusual synmetamorphic injected bodies of carbonate rocks. Such rocks comprise two groups, marble melanges and crustal carbonate melted rocks. Obviously, carbonate rocks (that composed the original layers and horizons of stratified beds can become less viscous to a certain degree at some locations during the process of oblique collision and acquire unusual properties and can thus intrude into the surrounding rocks of silicate composition. Such carbonate rocks behave as protrusions

  18. Interpretation of gravity data in a complex volcano-tectonic setting, southwestern Nevada

    International Nuclear Information System (INIS)

    Snyder, D.B.; Carr, W.J.

    1984-01-01

    This regional gravity study was conducted during the past few years at Yucca Mountain, southern Nye County, Nevada, as part of a program to locate a suitable repository for high-level nuclear waste. About 100 surface rock samples, three borehole gamma-gamma logs, and one borehole gravity study provide excellent density control. A nearly linear increase in density of 0.26 g/cm 3 per kilometer of depth is indicated in the thick tuff sequences that underlie the mountain. Isostatic and 2.0-g/cm 3 Bouguer corrections were applied to the observed gravity values to remove regional gradients and topographic effects, respectively. The Bare Mountain gravity high is connected with a greater gravity high over the Funeral Mountains, to the southwest; together, these highs result from a continuous block of dense, metamorphosed Precambrian and Paleozoic rocks that stretches across much of the Walker Lane from the east edge of Death Valley to Bare Mountain. The Calico Hills gravity high appears more likely to originate from a northeast trending buried ridge of Paleozoic rocks that extends southwestward beneath Busted Butte, 5 km southeast of the proposed repository, where two- and three-dimensional modeling indicates that the pre-Cenozoic rocks lie less than 1000 m beneath the surface. Tuff, at least 4000 m thick, fills a large steep-sided depression in the pretuff rocks beneath Yucca Mountain and Crater Flat. The gravity low and the thick tuff section lie within a large collapse area that includes the Crater Flat-Timber Mountain-Silent Canyon caldera complexes. Southward extension of the broad gravity low associated with Crater Flat into the Amargosa Desert is evidence for sector graben-type collapse sediments related to the information of the Timber Mountain caldera and superimposed on the other volcanic and extensional structures within Crater Flat. 48 references, 6 figures, 2 tables

  19. Organic carbon pattern and foraminiferal assemblage in the sediments of Gulf of Kutch

    Digital Repository Service at National Institute of Oceanography (India)

    Setty, M.G.A.P.; Ambre, N.V.

    . The foraminiferal number (TFN) and the species diversity (TSN) seem to fluctuate with the variation in the sediment pattern. It is highest in the fine clays chiefly with embryonic or meiofaunal in size, thin-walled and hyaline, whereas it is large, thick...

  20. Soft-sediment deformation structures in seismically affected deep-sea Miocene turbidites (Cilento Basin, southern Italy

    Directory of Open Access Journals (Sweden)

    Valente Alessio

    2014-07-01

    Full Text Available Soft-sediment deformation structures (SSDS are widespread in the upper part of the S. Mauro Formation (Cilento Group, Middle-Late Miocene. The succession is represented mainly by thick and very thick, massive, coarse-grained sandstones, deposited by rapid sedimentation of high-density turbidity currents. The most common SSDS are short pillars, dishes, sedimentary sills and convolutions. They occur mostly in the upper parts of sandstone beds. Vertical tubes of 4-5 cm in diameter and up to 50 cm long constitute the most striking structures. They begin in the middle part of sandstone beds, which are basically massive or contain faint dish structures. These tubes can bifurcate upwards and/ or pass into bedding-parallel veins or dikes. The vertical tubes sometimes form sand volcanoes on the then sedimentary surface.

  1. Thermal evolution of Lower Paleozoic sedimentary successions from organic and inorganic studies: the case history of the Holy Cross Mountains (central Poland)

    Science.gov (United States)

    Trolese, Matteo; Stefano Celano, Antonio; Corrado, Sveva; Caricchi, Chiara; Schito, Andrea; Aldega, Luca

    2015-04-01

    The rapid increase in shale gas production in the USA has triggered a growing interest in unconventional resources in Eastern and Northern Europe. In this framework, the potential shale gas reserves in Poland are the most promising in Europe, extending from the Baltic Sea to the Ukraine border. In this area, the Baltic, Podlasie and Lublin basins have already become objective of shale gas exploration and the Holy Cross Mountains (HCM, Central Poland) represents the outcropping analog of the buried targeted Lower Paleozoic successions, providing a unique opportunity to study and assess source rock potential. In this work, we provide new thermal maturity data of Paleozoic rocks exposed in the HCM. A multi-method approach, coupling organic matter/graptolites (i.e., marine organoclasts) optical analysis and X-ray diffraction of clay-sized fraction of sediments, was applied to constrain the burial - thermal evolution of the sedimentary succession. The investigated area of the HCM includes two different tectonic blocks: the Łysogóry region to the North and the Kielce region to the South, separated by the Holy Cross Fault (HCF). lllite content in mixed layer illite-smectite determinations and vitrinite/graptolites reflectance measurements (Roeq%), performed on samples (Cambrian - Devonian) collected from both the regions, show a substantial difference between the two blocks in terms of thermal maturity and burial history. Roeq% values in the southern block range from 0.5% to 1.0%, with few exceptions, indicating early to mid-mature stage of hydrocarbon generation. Samples collected in the northern block show much higher values, mainly from 1.2% up to 1.7%, representative of the gas generation window. The I-S ordering type also shows relevant differences in the two blocks. In the southern block, mixed-layered clay minerals varies from R1 (short-range) to R3 (long-range), whereas R3 structures are recorded in the northern block. Vitrinite reflectance and mixed-layer I

  2. Crustal growth history of the Korean Peninsula:Constraints from detrital zircon ages in modern river sediments

    Institute of Scientific and Technical Information of China (English)

    Taejin Choi; Yong Il Lee; Yuji Orihashi

    2016-01-01

    U-Pb analyses were carried out on detrital zircon grains from major river-mouth sediments draining South Korea to infer provenance characteristics and the crustal growth history of the southern Korean Peninsula, using a laser ablation inductively coupled plasma mass spectrometer (LA-ICP-MS). The Korean Peninsula is located in the East Asian continental margin and mainly comprises three Precambrian massifs and two metamorphic belts in between them. We obtained 515 concordant to slightly discordant zircon ages ranging from ca. 3566 to ca. 48 Ma. Regardless of river-mouth location, predominance of Mesozoic (249e79 Ma) and Paleoproterozoic (2491e1691 Ma) ages with subordinate Archean ages in-dicates that the zircon ages reflect present exposures of plutonic/metamorphic rocks in the drainage basins of the South Korean rivers and the crustal growth of the southern Korean Peninsula was focused in these two periods. Comparison of detrital zircon-age data between the North and South Korean river sediments reveals that the Paleoproterozoic zircon age distributions of both regions are nearly identical, while the NeoproterozoicePaleozoic ages exist and the Mesozoic ages are dominant in southern Korean Peninsula. This result suggests that Precambrian terrains in Korea record the similar pre-Mesozoic magmatic history and that the influence of Mesozoic magmatism was mainly focused in South Korea.

  3. Paleogene Sediment Character of Mountain Front Central Sumatra Basin

    Directory of Open Access Journals (Sweden)

    P. A. Suandhi

    2014-07-01

    Full Text Available DOI: 10.17014/ijog.v8i3.164The SE-NW trending Mountain Front of Central Sumatra Basin is located in the southern part of the basin. The Mountain Front is elongated parallel to the Bukit Barisan Mountain, extending from the Regencies of North Padang Lawas (Gunung Tua in the northwest, Rokan Hulu, Kampar, Kuantan Singingi, and Inderagiri Hulu Regency in the southeast. The Palaeogene sediments also represent potential exploration objectives in Central Sumatra Basin, especially in the mountain front area. Limited detailed Palaeogene sedimentology information cause difficulties in hydrocarbon exploration in this area. Latest age information and attractive sediment characters based on recent geological fieldwork (by chaining method infer Palaeogene sediment potential of the area. The Palaeogene sedimentary rock of the mountain front is elongated from northwest to southeast. Thickness of the sedimentary unit varies between 240 - 900 m. Palynology samples collected recently indicate that the oldest sedimentary unit is Middle Eocene and the youngest one is Late Oligocene. This latest age information will certainly cause significant changes to the existing surface geological map of the mountain front area. Generally, the Palaeogene sediments of the mountain front area are syn-rift sediments. The lower part of the Palaeogene deposit consists of fluvial facies of alluvial fan and braided river facies sediments. The middle part consists of fluvial meandering facies, lacustrine delta facies, and turbidity lacustrine facies sediments. The upper part consists of fluvial braided facies and transitional marine facies sediments. Volcanism in the area is detected from the occurrence of volcanic material as lithic material and spotted bentonite layers in the middle part of the mountain front area. Late rifting phase is indicated by the presence of transitional marine facies in the upper part of the Palaeogene sediments.

  4. Variable post-Paleozoic deformation detected by seismic reflection profiling across the northwestern "prong" of New Madrid seismic zone

    Science.gov (United States)

    McBride, J.H.; Pugin, Andre J.M.; Nelson, W.J.; Larson, T.H.; Sargent, S.L.; Devera, J.A.; Denny, F.B.; Woolery, E.W.

    2003-01-01

    High-resolution shallow seismic reflection profiles across the northwesternmost part of the New Madrid seismic zone (NMSZ) and northwestern margin of the Reelfoot rift, near the confluence of the Ohio and Mississippi Rivers in the northern Mississippi embayment, reveal intense structural deformation that apparently took place during the late Paleozoic and/or Mesozoic up to near the end of the Cretaceous Period. The seismic profiles were sited on both sides of the northeast-trending Olmsted fault, defined by varying elevations of the top of Mississippian (locally base of Cretaceous) bedrock. The trend of this fault is close to and parallel with an unusually straight segment of the Ohio River and is approximately on trend with the westernmost of two groups of northeast-aligned epicenters ("prongs") in the NMSZ. Initially suspected on the basis of pre-existing borehole data, the deformation along the fault has been confirmed by four seismic reflection profiles, combined with some new information from drilling. The new data reveal (1) many high-angle normal and reverse faults expressed as narrow grabens and anticlines (suggesting both extensional and compressional regimes) that involved the largest displacements during the late Cretaceous (McNairy); (2) a different style of deformation involving probably more horizontal displacements (i.e., thrusting) that occurred at the end of this phase near the end of McNairy deposition, with some fault offsets of Paleocene and younger units; (3) zones of steeply dipping faults that bound chaotic blocks similar to that observed previously from the nearby Commerce geophysical lineament (CGL); and (4) complex internal deformation stratigraphically restricted to the McNairy, suggestive of major sediment liquefaction or landsliding. Our results thus confirm the prevalence of complex Cretaceous deformations continuing up into Tertiary strata near the northern terminus of the NMSZ. ?? 2003 Elsevier Science B.V. All rights reserved.

  5. Sedimentary history and economic geology of San Juan Basin, New Mexico and Colorado

    International Nuclear Information System (INIS)

    Peterson, J.A.; LeLeit, A.J.; Spencer, C.W.; Ullrich, R.A.

    1981-01-01

    The San Juan Basin contains up to 15,000 ft of sedimentary rocks ranging in age from Cambrian to Recent. The earliest development of the area as a sedimentary basin or trough apparently took place in Pennsylvanian time, and the basin was maintained, with changing rates of subsidence and filling, through the remainder of geologic time. During the Early Paleozoic, sedimentation was dominated by marine transgressions across the northwestern flank of the regional Transcontinental Arch. The Late Paleozoic history was strongly influenced by tectonism related to development of the Ancestral Rocky Mountains Uplifts and associated downwarping. The Early Mesozoic is characterized by fluvial and eolian environments, interrupted periodically by thin marine transgressive deposits of nearshore redbeds. The final Mesozoic event was the widespread Late Cretaceous marine transgression which deposited a thick cyclic sequence of marine gray shale and sandstone, with interbedded coal. Late Tertiary regional uplift and resulting volcanism were accompanied by a regional dissection of the area by stream systems that evolved into the present drainage pattern of superposed streams. The sedimentary history is directly related to the occurrence of economic deposits in the basin. Major reserves of petroleum and gas are in Cretaceous and Pennsylvanian rocks, coal in Cretaceous, and uranium in Jurassic and Cretaceous. Abstract only

  6. Squirt flow due to interfacial water films in hydrate bearing sediments

    Directory of Open Access Journals (Sweden)

    K. Sell

    2018-05-01

    Full Text Available Sediments containing gas hydrate dispersed in the pore space are known to show a characteristic seismic anomaly which is a high attenuation along with increasing seismic velocities. Currently, this observation cannot be fully explained albeit squirt-flow type mechanisms on the microscale have been speculated to be the cause. Recent major findings from in situ experiments, using the gas in excess and water in excess formation method, and coupled with high-resolution synchrotron-based X-ray micro-tomography, have revealed the systematic presence of thin water films between the quartz grains and the encrusting hydrate. The data obtained from these experiments underwent an image processing procedure to quantify the thicknesses and geometries of the aforementioned interfacial water films. Overall, the water films vary from sub-micrometer to a few micrometers in thickness. In addition, some of the water films interconnect through water bridges. This geometrical analysis is used to propose a new conceptual squirt flow model for hydrate bearing sediments. A series of numerical simulations is performed considering variations of the proposed model to study seismic attenuation caused by such thin water films. Our results support previous speculation that squirt flow can explain high attenuation at seismic frequencies in hydrate bearing sediments, but based on a conceptual squirt flow model which is geometrically different than those previously considered.

  7. Sharp at any Age: Moho boundary thickness estimates along a trans-sect through 2 Ga of tectonic history.

    Science.gov (United States)

    Servali, A.; Levin, V. L.; VanTongeren, J. A.

    2015-12-01

    In this study we evaluate crustal thickness and Moho sharpness beneath seismic stations in three different tectonic units of the North American continent: the Archean Superior Province, the Proterozoic Grenville Province, and the Paleozoic Appalachian Orogen. Our analysis involves two steps. First, for each site, we produce P-to-S receiver functions (RFs) organized by backazimuth and epicentral distance, and use them to identify the phase most likely representing a conversion from the Moho. Second, we construct averaged RFs for groups of telesismic events located in a similar geographic region, which we employ to examine shapes of Moho P-to-S converted phases in time series with maximum frequencies increasing from 0.25Hz to 2-3 Hz. At some sites we observe a progressive narrowing of a simple Moho converted phase with an increase in frequency, typical of a vertically instantaneous boundary, while at others the converted phase becomes progressively more complex, typical of a diffuse Moho. Thus, we adopt this difference in converted wave shape dependence on increasing frequency as a measure of Moho thickness. Our estimates of Moho thickness range from less than 300 m to over 2 km, with some locations showing evidence for multiple converting boundaries in the 35-50 km depth range. In this study we define "sharp" Moho at those sites where its vertical thickness is less than 1 km. Our results show that sharp Moho is universal in the Archean terranes regardless of surface lithology, likely due to higher Moho temperatures facilitating wide-spread delamination of dense lower crustal rocks. While a sharp Moho is not unique to the Superior Province, all Grenville and Appalachians sites where we find sharp Moho are in regions of granitic plutonism, suggesting a possible general association with reworking and density sorting of the crustal material (e.g. volcanic arc).

  8. Surface sediment remobilization triggered by earthquakes in the Nankai forearc region

    Science.gov (United States)

    Okutsu, N.; Ashi, J.; Yamaguchi, A.; Irino, T.; Ikehara, K.; Kanamatsu, T.; Suganuma, Y.; Murayama, M.

    2017-12-01

    Submarine landslides triggered by earthquakes generate turbidity currents (e.g. Piper et al., 1988; 1999). Recently several studies report that the remobilization of the surface sediment triggered by earthquakes can also generate turbidity currents. However, studies that proposed such process are still limited (e.g. Ikehara et al., 2016; Mchugh et al., 2016; Moernaut et al., 2017). The purpose of this study is to examine those sedimentary processes in the Nankai forearc region, SW Japan using sedimentary records. We collected 46 cm-long multiple core (MC01) and a 6.7 m-long piston core (PC03) from the small basin during the R/V Shinsei Maru KS-14-8 cruise. The small confined basin, which is our study site, block the paths of direct sediment supply from river-submarine canyon system. The sampling site is located at the ENE-WSW elongated basin between the accretionary prism and the forearc basin off Kumano without direct sediment supply from river-submarine canyon system. The basin exhibits a confined basin that captures almost of sediments supplied from outside. Core samples are mainly composed of silty clay or very fine sand. Cs-137 measurement conducted on a MC01 core shows constantly high value at the upper 17 cm section and no detection below it. Moreover, the sedimentary structure is similar to fine-grained turbidite described by Stow and Shanmgam (1980), we interpret the upper 17 cm of MC01 as muddy turbidite. Grain size distribution and magnetic susceptibility also agree to this interpretation. Rapid sediment deposition after 1950 is assumed and the most likely event is the 2004 off Kii peninsula earthquakes (Mw=6.6-7.4). By calculation from extent of provenance area, which are estimated by paleocurrent analysis and bathymetric map, and thickness of turbidite layer we conclude that surface 1 cm of slope sediments may be remobilized by the 2004 earthquakes. Muddy turbidites are also identified in a PC03 core. The radiocarbon age gap of 170 years obtained

  9. Sediment lithostratigraphy and past changes in sedimentary environment in isolated lakes in Satakunta region; Sedimenttistratigrafia ja sedimentaatioympaeristoen muutokset Itaemerestae kuroutuneissa jaervissae Satakunnassa

    Energy Technology Data Exchange (ETDEWEB)

    Ojala, A.E.K. [GTK Geological Survey of Finland, Espoo (Finland)

    2011-12-15

    The purpose of the present study was to investigate lacustrine sediment sections in lakes isolated from the Baltic Sea basin and appearing in Satakunta region. One of the aims was to characterize their sediment composition and structures (sediment lithostratigraphy) and to describe their past and present sedimentary environment. Altogether, 8 lakes were selected for the study based on their variable appearance and catchment environmental conditions, i.e. properties such as lake shape, size, and morphometry, as well as altitude and geology of the drainage basin. The primary research methods applied included use of ground penetrating radar, sediment coring and physical sedimentological applications. Sediment erosion, transportation and deposition (re-deposition) are significant but often slowly-appearing processes in lacustrine environment, such as the one presently studied. The rate of erosion and sediment yield depend primarily on water depth in different parts of a lake, wind and current action, and hydrological (palaeohydrological) changes. All the presently studied sediment sections were characterized by erosion and redeposition horizons. However, this is not surprising considering their isolation history from the Baltic Sea basin and current rather shallow nature. All presently studied lakes contained 2-8 meters thick section of post-glacial sediments. Being rather shallow and filled with sediments, these lakes were considered to be prone to erosion by wind and wave actions as well as sediment re-deposition. Some of the presently studied sediment sections were characterized by 10 to 50 cm thick (sandy) erosion horizons in their type-stratigraphies. However, sections were not discovered to contain massive discontinuity surfaces that would indicate fault-type sediment structures during the past 8000 years. Neither did the ground penetrating radar data show significant faults. (orig.)

  10. A modified Wyllie equation for the relationship between porosity and sonic velocity of mixed sediments and carbonates from the Caribbean Sea

    DEFF Research Database (Denmark)

    Lind, Ida

    1997-01-01

    Continuous drill cores from the Caribbean Sea of up to 1 km thick mixed sediments and carbonates were recovered by Ocean Drilling Program Leg 165. The sediments range in porosity from 10% to 80% and in carbonate content from 20% to 95%. Unconfined P-wave velocities from this material were measured...

  11. Heavy Metal Pollution Evolution in Sediments from Urdaibai Bay (Spain)

    International Nuclear Information System (INIS)

    Soto, J.; Soto, J.A.; Corral, D.; Gelen, A.; Diaz, O.; Navas, A.

    2003-01-01

    Full Text: The Urdaibai bay is a biosphere reservoir located in the north of Spain. The mayor components of bay sediments come from marls and clays eroded which are deposited together with metallic pollutants present in water, air and rain. For this reason it is possible to study the temporal evolution of the bay pollution by measuring the heavy metal concentrations in the sediments and considering the correspondence with its age. To this aim, sediments cores were taken in two different points of the Urdaibai bay. The cores were cut into 1 cm thick horizontal sections. Sediment dating was performed using a low background gamma spectrometry with GeHP to determine Cs-137, Ra-226 and Pb-210 activities and applying the CIC and CRS models. The heavy metal concentrations in sediments were determined by ICP-MS. The obtained results in one of the studied positions show an increment of the Pb, Zn, Ni, Cu and Cr concentrations in the first 10 cm of the sediment core. This fact can be related to an increase of the bay pollution in the last 100 years. In the second studied core the heavy metal concentrations are constant in depth or lower in the superficial layers. This could be due to an increment the deposition rate of eroded material

  12. Hydrogeologic inferences from drillers' logs and from gravity and resistivity surveys in the Amargosa Desert, southern Nevada

    International Nuclear Information System (INIS)

    Oatfield, W.J.; Czarnecki, J.B.

    1989-01-01

    The Amargosa Desert of southern Nevada, in the Basin and Range province, is hydraulically downgradient from Yucca Mountain, the potential site of a repository for high-level nuclear waste. Ground-water flow paths and flow rates beneath the Amargosa Desert are controlled in part by the total saturated thickness and the hydraulic properties of basin-fill alluvial sediments. Drillers' logs of water wells completed in alluvium were analyzed to help characterize the hydrogeologic framework underlying the Amargosa Desert. Fractions of coarse-grained sediments, calculated from each of these logs, were contoured using a universal-kriging routine to interpolate values. Results from a previous electrical sounding survey also were contoured, including the estimated depth to Paleozoic basement rocks. The vertical electric sounding results were obtained from individual depth-to-resistivity profiles, from which the average resistivity of the total profile and the resistivity of the upper 75 meters were calculated. the distribution and variations in average resistivity of the total depth correlated reasonably well with the distribution of variations in regional gravity. 24 refs., 17 figs

  13. Initial study of sediment antagonism and characteristics of silver nanoparticle-coated biliary stents in an experimental animal model.

    Science.gov (United States)

    Tian, Yigeng; Xia, Mingfeng; Zhang, Shuai; Fu, Zhen; Wen, Qingbin; Liu, Feng; Xu, Zongzhen; Li, Tao; Tian, Hu

    2016-01-01

    Plastic biliary stents used to relieve obstructive jaundice are frequently blocked by sediment, resulting in loss of drainage. We prepared stents coated with silver nanoparticles (AgNPs) and compared their ability to resist sedimentation with Teflon stents in a beagle model of obstructive jaundice. AgNP-coated Teflon biliary stents were prepared by chemical oxidation-reduction and evaluated in an obstructive jaundice model that was produced by ligation of common bile duct (CBD); animals were randomized to two equal groups for placement of AgNP-coated or Teflon control stents. Liver function and inflammatory index were found to be similar in the two groups, and the obstruction was relieved. Stents were removed 21 days after insertion and observed by scanning and transmission electron microscopy. The AgNP coating was analyzed by energy dispersive X-ray analysis (EDXA), and the composition of sediment was assayed by Fourier-transform infrared (FTIR) spectroscopy. Electron microscopy revealed a black, closely adherent AgNP stent coating, with thicknesses of 1.5-6 µm. Sediment thickness and density were greater on Teflon than on AgNP-coated stents. EDXA confirmed the stability and integrity of the AgNP coating before and after in vivo animal experimentation. FTIR spectroscopy identified stent sediment components including bilirubin, cholesterol, bile acid, protein, calcium, and other substances. AgNP-coated biliary stents resisted sediment accumulation in this canine model of obstructive jaundice caused by ligation of the CBD.

  14. Electrical structures in the northwest margin of the Junggar basin: Implications for its late Paleozoic geodynamics

    Science.gov (United States)

    Zhang, Sheng; Xu, Yixian; Jiang, Li; Yang, Bo; Liu, Ying; Griffin, W. L.; Luo, Yong; Huang, Rong; Zhou, Yong; Zhang, Liangliang

    2017-10-01

    Recent geological, geochemical and geophysical data have inclined to support the presence of a remnant Paleozoic oceanic lithosphere beneath the Western Junggar, southwestern Chinese Altaids. However, regional high-resolution geophysical data have been rarely deployed to image its geometry, making it difficult to trace its evolution and final geodynamic setting. Presently, two magnetotelluric (MT) profiles are deployed across the northwest margin of the Junggar basin and the southern Darbut belt to image the electrical structure of the crust and lithospheric mantle. High-quality data at 102 sites and the quasi-2D indications of phase tensor skew angles and impedance phase ellipses for relatively short periods (up to 500 s) allow us to invert the two profile data by a 2-D scheme. The resistivity cross-section of a NW-SE striking LINE2 sheds light on a fossil intraoceanic subduction system, and reveals the Miaoergou intrusions as a bowl-like pluton, indicating that the multi-phase intrusions primarily formed in a post-collisional setting. The resistivity cross-section of striking NE-SW LINE1 reveals a possible oceanic slab with relatively lower resistivity underlying the low-resistivity sedimentary strata and high-resistivity mélange. Given that the profile of LINE1 cuts the out-rise zone of a subducted slab developed during the late Paleozoic, the 2-D resistivity model may thus represent the zone that have experienced heterogeneous deformation, reflecting subduction with barrier variation parallel to the ancient trench. Moreover, as shown in previous results, the new MT data also illustrate that the Darbut Fault is a thin-skinned structure, which has been erased at depths during the subsequent magmatism.

  15. Feast to famine: Sediment supply control on Laramide basin fill

    Science.gov (United States)

    Carroll, Alan R.; Chetel, Lauren M.; Elliot Smith, M.

    2006-03-01

    Erosion of Laramide-style uplifts in the western United States exerted an important first-order influence on Paleogene sedimentation by controlling sediment supply rates to adjacent closed basins. During the latest Cretaceous through Paleocene, these uplifts exposed thick intervals of mud-rich Upper Cretaceous foreland basin fill, which was quickly eroded and redeposited. Cretaceous sedimentary lithologies dominate Paleocene conglomerate clast compositions, and the volume of eroded foreland basin strata is approximately twice the volume of preserved Paleocene basin fill. As a result of this sediment oversupply, clastic alluvial and paludal facies dominate Paleocene strata, and are associated with relatively shallow and ephemeral freshwater lake facies. In contrast, large, long-lived, carbonate-producing lakes occupied several of the basins during the Eocene. Basement-derived clasts (granite, quartzite, and other metamorphic rocks) simultaneously became abundant in lower Eocene conglomerate. We propose that Eocene lakes developed primarily due to exposure of erosion-resistant lithologies within cores of Laramide uplifts. The resultant decrease in erosion rate starved adjacent basins of sediment, allowing the widespread and prolonged deposition of organic-rich lacustrine mudstone. These observations suggest that geomorphic evolution of the surrounding landscape should be considered as a potentially important influence on sedimentation in many other interior basins, in addition to more conventionally interpreted tectonic and climatic controls.

  16. Climate vs. tectonic induced variations in Cenozoic sediment supply from western Scandinavia

    DEFF Research Database (Denmark)

    Gołędowski, Bartosz; Nielsen, S.B.; Clausen, O.R.

    Eocene times tectonic activity related to the final stage of opening of the North Atlantic was apparently controlling the sediment input in the North Sea as sediment pulses correlate well with tectonic events. Although there is no signs of Cenozoic tectonic activity onshore Scandinavia (igneous bodies......, faulting), tectonic disturbance related to ocean opening could be responsible for deposition of thick Paleocene wedges along the western coast of Norway. During subsequent Cenozoic periods domal structures in the Norwegian shelf are a proof for mild and protracted compression. However, depositional...... patterns from offshore Scandinavia have been interpreted as a result of significant tectonic movements. In the absence of proofs for active tectonic agents we attempt to explain these sediment input variations as a result of climate fluctuations. The Eocene-Oligocene greenhouse-icehouse climate transition...

  17. The Diffusive Boundary-Layer of Sediments - Oxygen Microgradients Over a Microbial Mat

    DEFF Research Database (Denmark)

    JØRGENSEN, BB; MARAIS, DJD

    1990-01-01

    Oxygen microelectrodes were used to analyze the distribution of the diffusive boundary layer (DBL) at the sedimen-water interface in relation to surface topography and flow velocity. The sediment, collected from saline ponds, was covered by a microbial mat that had high oxygen consumption rate...... and well-defined surface structure. Diffusion through the DBL constituted an important rate limitation to the oxygen uptake of the sediment. The mean effective DBL thickness decreased from 0.59 to 0.16 mm as the flow velocity of the overlying water was increased from 0.3 to 7.7 cm s-1 (measured 1 cm above...

  18. AMS radiocarbon dating of lacustrine sediment from an impact crater in northeastern China

    Energy Technology Data Exchange (ETDEWEB)

    Liu, K.X. [State Key Laboratory of Nuclear Physics and Technology and Institute of Heavy Ion Physics, School of Physics, Peking University, Beijing 100871 (China); Chen, M., E-mail: mchen@gig.ac.cn [Key Laboratory of Mineralogy and Metallogeny, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, 510640 Guangzhou (China); Ding, X.F.; Fu, D.P. [State Key Laboratory of Nuclear Physics and Technology and Institute of Heavy Ion Physics, School of Physics, Peking University, Beijing 100871 (China); Ding, P. [State Key Laboratory of Isotope Geochemistry, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, 510640 Guangzhou (China); Shen, C.D., E-mail: cdshen@gig.ac.cn [State Key Laboratory of Isotope Geochemistry, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, 510640 Guangzhou (China); Xiao, W.S. [Key Laboratory of Mineralogy and Metallogeny, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, 510640 Guangzhou (China)

    2013-01-15

    In order to investigate the origin and age of a bowl-shaped crater with 1.8 km diameter in northeastern China, a core drilling about 110 m in total was carried out in 2009 at the center of the crater. A 106-m-thick unit of lacustrine sediment is revealed under a surface layer of about 1 m of yellow soil. The impact origin has been confirmed based on geological analysis. In this paper, we report the AMS {sup 14}C dating results of lacustrine sediment. The data suggest that the meteorite impact in Xiuyan happened more than 50,000 years ago and a two-section linear relationship of {sup 14}C ages with the depth shows a stable sediment environment through the two time stages.

  19. Observations and modeling of fjord sedimentation during the 30 year retreat of Columbia Glacier, AK

    Science.gov (United States)

    Love, Katherine B; Hallet, Bernard; Pratt, Thomas L.; O'Neel, Shad

    2016-01-01

    To explore links between glacier dynamics, sediment yields and the accumulation of glacial sediments in a temperate setting, we use extensive glaciological observations for Columbia Glacier, Alaska, and new oceanographic data from the fjord exposed during its retreat. High-resolution seismic data indicate that 3.2 × 108 m3 of sediment has accumulated in Columbia Fjord over the past three decades, which corresponds to ~5 mm a−1 of erosion averaged over the glaciated area. We develop a general model to infer the sediment-flux history from the glacier that is compatible with the observed retreat history, and the thickness and architecture of the fjord sediment deposits. Results reveal a fivefold increase in sediment flux from 1997 to 2000, which is not correlated with concurrent changes in ice flux or retreat rate. We suggest the flux increase resulted from an increase in the sediment transport capacity of the subglacial hydraulic system due to the retreat-related steepening of the glacier surface over a known subglacial deep basin. Because variations in subglacial sediment storage can impact glacial sediment flux, in addition to changes in climate, erosion rate and glacier dynamics, the interpretation of climatic changes based on the sediment record is more complex than generally assumed.

  20. Heat transfer from a high temperature condensable mixture. II. Sedimentation of fog condensate

    International Nuclear Information System (INIS)

    Condiff, D.W.; Cho, D.H.; Chan, S.H.

    1985-01-01

    A kinematic wave analysis of fog sedimentation is employed to relate growth of a fog condensate deposit layer to radiation generated fog formation rates. The increase of surface radiation absorptivity with deposit layer thickness promotes a feedback mechanism for higher growth rates, which is evaluated in detail

  1. Sediment Budget Analysis and Hazard Assessment in the Peynin, a Small Alpine Catchment (Upper Guil River, Southern Alps, France)

    Science.gov (United States)

    Carlier, Benoit; Arnaud-Fassetta, Gilles; Fort, Monique; Bouccara, Fanny; Sourdot, Grégoire; Tassel, Adrien; Lissak, Candide; Betard, François; Cossart, Etienne; Madelin, Malika; Viel, Vincent; Charnay, Bérengère; Bletterie, Xavier

    2014-05-01

    alluvial fans and plains. Most of these forms are relict landforms, decoupled from the present geomorphic system. Notable sediment transport is limited to avalanche tracks, debris flows, and along floodplains. Sediment volumes were calculated using a combination of polynomial functions of cross sections and GIS modelling. We calculated the overall sediment volume of the valley fill deposits to be 1.05 km3. This corresponds to a mean sediment thickness of 90.2 m. Landslides appear as the major sediment storage, representing more than 35% of the sediment volume stored in the Peynin subcatchment. For some locations, the polynomial-generated cross sections resulted in overestimations of sediment thickness, therefore, these results have to be considered as an order of magnitude. Future investigations will include seismic refraction profiles that may provide bedrock depth, hence a better control on sediment thickness (estimates generated thanks to GIS). Eventually, we expect our results to be used to better model, hence prevent future debris-flow events at the confluence of Peynin stream with the Guil River.

  2. The Influence of Syndepositional Macropores on the Hydraulic Integrity of Thick Alluvial Clay Aquitards

    Science.gov (United States)

    Timms, Wendy A.; Acworth, R. Ian; Crane, Richard A.; Arns, Christoph H.; Arns, Ji-Youn; McGeeney, Dayna E.; Rau, Gabriel C.; Cuthbert, Mark O.

    2018-04-01

    Clay-rich deposits are commonly assumed to be aquitards which act as natural hydraulic barriers due to their low hydraulic connectivity. Postdepositional weathering processes are known to increase the permeability of aquitards in the near surface but not impact on deeper parts of relatively thick formations. However, syndepositional processes affecting the hydraulic properties of aquitards have previously received little attention in the literature. Here, we analyze a 31 m deep sediment core recovered from an inland clay-rich sedimentary sequence using a combination of techniques including particle size distribution and microscopy, centrifuge dye tracer testing and micro X-ray CT imaging. Subaerial deposition of soils within these fine grained alluvial deposits has led to the preservation of considerable macropores (root channels or animal burrows). Connected pores and macropores thus account for vertical hydraulic conductivity (K) of 4.2×10-9 m/s (geometric mean of 13 samples) throughout the thick aquitard, compared to a matrix K that is likely sediment was deposited must be considered when aquitards are investigated as potential natural hydraulic barriers and illustrate the value of combining multiple investigation techniques for characterizing clay-rich deposits.

  3. Closure Time of the Junggar-Balkhash Ocean: Constraints From Late Paleozoic Volcano-Sedimentary Sequences in the Barleik Mountains, West Junggar, NW China

    Science.gov (United States)

    Liu, Bo; Han, Bao-Fu; Chen, Jia-Fu; Ren, Rong; Zheng, Bo; Wang, Zeng-Zhen; Feng, Li-Xia

    2017-12-01

    The Junggar-Balkhash Ocean was a major branch of the southern Paleo-Asian Ocean. The timing of its closure is important for understanding the history of the Central Asian Orogenic Belt. New sedimentological and geochronological data from the Late Paleozoic volcano-sedimentary sequences in the Barleik Mountains of West Junggar, NW China, help to constrain the closure time of the Junggar-Balkhash Ocean. Tielieketi Formation (Fm) is dominated by littoral sediments, but its upper glauconite-bearing sandstone is interpreted to deposit rapidly in a shallow-water shelf setting. By contrast, Heishantou Fm consists chiefly of volcanic rocks, conformably overlying or in fault contact with Tielieketi Fm. Molaoba Fm is composed of parallel-stratified fine sandstone and sandy conglomerate with graded bedding, typical of nonmarine, fluvial deposition. This formation unconformably overlies the Tielieketi and Heishantou formations and is conformably covered by Kalagang Fm characterized by a continental bimodal volcanic association. The youngest U-Pb ages of detrital zircons from sandstones and zircon U-Pb ages from volcanic rocks suggest that the Tielieketi, Heishantou, Molaoba, and Kalagang formations were deposited during the Famennian-Tournaisian, Tournaisian-early Bashkirian, Gzhelian, and Asselian-Sakmarian, respectively. The absence of upper Bashkirian to Kasimovian was likely caused by tectonic uplifting of the West Junggar terrane. This is compatible with the occurrence of coeval stitching plutons in the West Junggar and adjacent areas. The Junggar-Balkhash Ocean should be finally closed before the Gzhelian, slightly later or concurrent with that of other ocean domains of the southern Paleo-Asian Ocean.

  4. Devonian conodonts from the Foča–Prača Paleozoic complex (Durmitor Nappe, southeastern Bosnia and Herzegovina

    Directory of Open Access Journals (Sweden)

    Bogdan Jurkovšek

    2011-06-01

    Full Text Available Conodont study of the Crna Rijeka borehole CR-17, positioned in the frontal part of the Durmitor Nappe (Foča – Prača Paleozoic complex, SE Bosnia and Herzegovina is presented. The obtained fauna indicates an Early-Middle Devonian age and due to poor preservation an identification at a generic level is possible only. The recovered conodont elements have a high Color Alteration Index (CAI = 6,5–7 indicating a degree of metamorphism corresponding to a temperature interval from 440 °C to 720 °C.

  5. Application of magnetic susceptibility as a paleoclimatic proxy on Paleozoic sedimentary rocks and characterization of the magnetic signal – IGCP-580 projects and event

    Czech Academy of Sciences Publication Activity Database

    da Silva, A-Ch.; Whalen, M. T.; Hladil, Jindřich; Koptíková, Leona; Chen, D.; Spassov, S.; Boulvain, F.; Devleeschouwer, X.

    2014-01-01

    Roč. 37, č. 2 (2014), s. 87-95 ISSN 0705-3797 Institutional support: RVO:67985831 Keywords : rock magnetism * high-resolution stratigraphy * palaeoclimatic archives * computing * Paleozoic * Phanerozoic * Recent Subject RIV: DE - Earth Magnetism, Geodesy, Geography Impact factor: 2.000, year: 2014 http://www.episodes.co.in/contents/2014/june/pp87-95.pdf

  6. Morphodynamic simulation of sediment deposition patterns on a recently stripped bedrock anastomosed channel

    Directory of Open Access Journals (Sweden)

    D. Milan

    2018-04-01

    Full Text Available Some mixed bedrock-alluvial dryland rivers are known to undergo cycles of alluvial building during low flow periods, punctuated by stripping events during rare high magnitude flows. We focus on the Olifants River, Kruger National Park, South Africa, and present 2-D morphodynamic simulations of hydraulics and sediment deposition patterns over an exposed bedrock anastomosed pavement. We examine the assumptions underlying a previous conceptual model, namely that sedimentation occurs preferentially on bedrock highs. Our modelling results and local field observations in fact show that sediment thicknesses are greater over bedrock lows, suggesting these are the key loci for deposition, barform initiation and island building. During peak flows, velocities in the topographic lows tend to be lower than in intermediate topographic areas. It is likely that intermediate topographic areas supply sediment to the topographic lows at this flow stage, which is then deposited in the lows on the falling limb of the hydrograph as velocities reduce. Subsequent vegetation establishment on deposits in the topographic lows is likely to play a key role in additional sedimentation and vegetation succession, both through increasing the cohesive strength of alluvial units and by capturing new sediments and propagules.

  7. Morphodynamic simulation of sediment deposition patterns on a recently stripped bedrock anastomosed channel

    Science.gov (United States)

    Milan, David; Heritage, George; Entwistle, Neil; Tooth, Stephen

    2018-04-01

    Some mixed bedrock-alluvial dryland rivers are known to undergo cycles of alluvial building during low flow periods, punctuated by stripping events during rare high magnitude flows. We focus on the Olifants River, Kruger National Park, South Africa, and present 2-D morphodynamic simulations of hydraulics and sediment deposition patterns over an exposed bedrock anastomosed pavement. We examine the assumptions underlying a previous conceptual model, namely that sedimentation occurs preferentially on bedrock highs. Our modelling results and local field observations in fact show that sediment thicknesses are greater over bedrock lows, suggesting these are the key loci for deposition, barform initiation and island building. During peak flows, velocities in the topographic lows tend to be lower than in intermediate topographic areas. It is likely that intermediate topographic areas supply sediment to the topographic lows at this flow stage, which is then deposited in the lows on the falling limb of the hydrograph as velocities reduce. Subsequent vegetation establishment on deposits in the topographic lows is likely to play a key role in additional sedimentation and vegetation succession, both through increasing the cohesive strength of alluvial units and by capturing new sediments and propagules.

  8. Sedimentology and stratigraphy of Neoproterozoic-lower Paleozoic carbonate-siliciclastic succession of the southwesternmost Amazon Craton, state of Rondônia, Brazil

    OpenAIRE

    Afonso, Jhon Willy Lopes; Nogueira, Afonso César Rodrigues

    2018-01-01

    ABSTRACT: Facies and stratigraphic analysis were carried out in Neoproterozoic-Lower Paleozoic carbonate-siliciclastic deposits of Cacoal and Pimenta Bueno formations exposed on basement rocks and into the Pimenta Bueno Graben, northwestern portion of Parecis Basin, southwesternmost Amazon Craton. The redescription and redefinion of this succession confirmed the previous interpretation for the Cacoal Formation as a Marinoan (~ 635 Ma) cap carbonate. The Cacoal Formation is subdivided here in ...

  9. The Effects of Rapid Sedimentation upon Continental Breakup: Kinematic and Thermal Modeling of the Salton Trough, Southern California, Based upon Recent Seismic Images

    Science.gov (United States)

    Han, L.; Hole, J. A.; Lowell, R. P.; Stock, J. M.; Fuis, G. S.

    2016-12-01

    The Salton Seismic Imaging Project (SSIP) illuminated crustal and upper mantle structure of the Salton Trough, the northern-most rift segment of the Gulf of California plate boundary. The crust is 17-18 km thick and homogeneous for 100 km in the plate motion direction. New crust is being created by distributed rift magmatism, Colorado River sedimentation, and metamorphism of the sediment. A 5 km thick pre-existing crustal layer may still exist. The crust has not broken apart to enable initiation of seafloor spreading. A one-dimensional time-dependent kinematic and thermal model was developed to simulate these observations. We assume that all crustal layers are stretched uniformly during extension. Distributed mafic magmatism and sedimentation are added simultaneously to compensate for the crustal thinning. The ratio of magmatism to sedimentation is constrained by the seismic observations. Heat is transported by thermal conduction and by advection due to stretching of the crust. A constant temperature boundary at the Moho is used to represent partial melting in the upper mantle. Assuming a constant plate motion rate, the zone of active rifting extends linearly with time. The crustal thickness and internal structure also evolve with time. The model constraints are the observed seismic structure and heat flow. The model rapidly reaches quasi-steady state, and could continue for many millions of years. The observed seismic structure and heat flow are reproduced after 3 Myr. The yield strength profile calculated from lithology and model temperature indicates that ductile deformation in the middle and lower crust dominates the crustal rheology. Rapid sedimentation delays crustal breakup and the initiation of seafloor spreading by maintaining the thickness of the crust and keeping it predominantly ductile. This process probably occurs wherever a large river flows into an active rift driven by far-field extension. It may have built passive margins in many locations

  10. Biological and chemical sulfide oxidation in a Beggiatoa inhabited marine sediment

    DEFF Research Database (Denmark)

    Preisler, André; de Beer, Dirk; Lichtschlag, Anna

    2007-01-01

    The ecological niche of nitrate-storing Beggiatoa, and their contribution to the removal of sulfide were investigated in coastal sediment. With microsensors a clear suboxic zone of 2-10 cm thick was identified, where neither oxygen nor free sulfide was detectable. In this zone most of the Beggiat...

  11. Strontium Isotopic Composition of Paleozoic Carbonate Rocks in the Nevada Test Site Vicinity, Clark, Lincoln, and Nye Counties, Nevada and Inyo County, California

    International Nuclear Information System (INIS)

    James B. Paces; Zell E. Peterman; Kiyoto Futa; Thomas A. Oliver; Brian D. Marshall.

    2007-01-01

    Ground water moving through permeable Paleozoic carbonate rocks represents the most likely pathway for migration of radioactive contaminants from nuclear weapons testing at the Nevada Test Site, Nye County, Nevada. The strontium isotopic composition (87Sr/86Sr) of ground water offers a useful means of testing hydrochemical models of regional flow involving advection and reaction. However, reaction models require knowledge of 87Sr/86Sr data for carbonate rock in the Nevada Test Site vicinity, which is scarce. To fill this data gap, samples of core or cuttings were selected from 22 boreholes at depth intervals from which water samples had been obtained previously around the Nevada Test Site at Yucca Flat, Frenchman Flat, Rainier Mesa, and Mercury Valley. Dilute acid leachates of these samples were analyzed for a suite of major- and trace-element concentrations (MgO, CaO, SiO2, Al2O3, MnO, Rb, Sr, Th, and U) as well as for 87Sr/86Sr. Also presented are unpublished analyses of 114 Paleozoic carbonate samples from outcrops, road cuts, or underground sites in the Funeral Mountains, Bare Mountain, Striped Hills, Specter Range, Spring Mountains, and ranges east of the Nevada Test Site measured in the early 1990's. These data originally were collected to evaluate the potential for economic mineral deposition at the potential high-level radioactive waste repository site at Yucca Mountain and adjacent areas (Peterman and others, 1994). Samples were analyzed for a suite of trace elements (Rb, Sr, Zr, Ba, La, and Ce) in bulk-rock powders, and 87Sr/86Sr in partial digestions of carbonate rock using dilute acid or total digestions of silicate-rich rocks. Pre-Tertiary core samples from two boreholes in the central or western part of the Nevada Test Site also were analyzed. Data are presented in tables and summarized in graphs; however, no attempt is made to interpret results with respect to ground-water flow paths in this report. Present-day 87Sr/86Sr values are compared to values

  12. Site Amplification in the Central U.S.: Towards and understanding of factors influencing the site effect

    Science.gov (United States)

    Yassminh, R.; Sandvol, E. A.

    2017-12-01

    We have mapped site amplification using a Reverse Two Station (RTS) approach across much of the Central United States. We have found several unexpected results including a lack of amplification in Paleozoic basins such as the Illinois and Michigan basins. In general, we found that the amplification of high frequency regional waves is related to the topography. We also suggest that the HVSR spectra are primarily a function of the shallow velocity structure. The Central United States Seismic Observatory (CUSSO) is a vertical seismic array located adjacent to the central segment of the NMSZ. CUSSO data gives us the opportunity to understand the amplification of the ground motion at different depths within the uppermost crust. Simulating ground motions throughout the CUSSO borehole and examining the factors affecting the ground amplification, such as the velocity and thicknesses of the model layers and the source sizes, is an effective way to understand the role different factors playing in modifying the ground motion for both the local and regional seismic phases. We have used the spectral-element method (SEMs) with a 1D crustal velocity structure derived from logging data taken from CUSSO borehole. This model is comprised of near surface sediment layers and a Paleozoic basement. Utilizing the software package SPECFEM2D with virtual seismometers located on the surface and in the bottom of the different sediment layers, we have computed the true synthetic site amplification for frequencies between 0.01-3 Hz. For the local model, we have tested the sensitivity of the ground motion amplification to the source magnitude. For frequencies>0.6, the ground motions have been amplified with decreasing the magnitudes while for HZ2Hz.

  13. Instantaneous sediment transport model for asymmetric oscillatory sheet flow.

    Directory of Open Access Journals (Sweden)

    Xin Chen

    Full Text Available On the basis of advanced concentration and velocity profiles above a mobile seabed, an instantaneous analytical model is derived for sediment transport in asymmetric oscillatory flow. The applied concentration profile is obtained from the classical exponential law based on mass conservation, and asymmetric velocity profile is developed following the turbulent boundary layer theory and the asymmetric wave theory. The proposed model includes two parts: the basic part that consists of erosion depth and free stream velocity, and can be simplified to the total Shields parameter power 3/2 in accordance with the classical empirical models, and the extra vital part that consists of phase-lead, boundary layer thickness and erosion depth. The effects of suspended sediment, phase-lag and asymmetric boundary layer development are considered particularly in the model. The observed instantaneous transport rate proportional to different velocity exponents due to phase-lag is unified and summarised by the proposed model. Both instantaneous and half period empirical formulas are compared with the developed model, using extensive data on a wide range of flow and sediment conditions. The synchronous variation in instantaneous transport rate with free stream velocity and its decrement caused by increased sediment size are predicted correctly. Net transport rates, especially offshore transport rates with large phase-lag under velocity skewed flows, which existing instantaneous type formulas failed to predict, are predicted correctly in both direction and magnitude by the proposed model. Net sediment transport rates are affected not only by suspended sediment and phase-lag, but also by the boundary layer difference between onshore and offshore.

  14. The geological map of Uruguay

    International Nuclear Information System (INIS)

    Bossi, J.; Ferrando, L.; Fernandez, A.; Elizalde, G.; Morales, H.; Ledesma, J.; Carballo, E.; Medina, E.; Ford, I.; Montana, J.

    1975-01-01

    The geological map of Uruguay is about the morphological characteristics of the soil such as rocks, sediments and granites belong to different periods. These periods are the proterozoic, paleozoic, permian, mesozoic, jurassic, cretaceous, cenozoic and holocene.

  15. Crustal Thickness Beneath Libya and the Origin of Partial Melt Beneath AS Sawda Volcanic Province From Receiver Function Constraints

    Science.gov (United States)

    Lemnifi, Awad A.; Elshaafi, Abdelsalam; Browning, John; Aouad, Nassib S.; El Ebaidi, Saad K.; Liu, Kelly K.; Gudmundsson, Agust

    2017-12-01

    This study investigates crustal thickness and properties within the Libyan region. Results obtained from 15 seismic stations belonging to the Libyan Center for Remote Sensing and Space Science are reported, in addition to 3 seismic stations publically available, using receiver functions. The results show crustal thicknesses ranging from 24 km to 36 km (with uncertainties ranging between ±0.10 km and ±0.90 km). More specifically, crustal thickness ranges from 32 km to 36 km in the southern portion of the Libyan territory then becomes thinner, between 24 km and 30 km, in the coastal areas of Libya and thinnest, between 24 km and 28 km, in the Sirt Basin. The observed high Vp/Vs value of 1.91 at one station located at the AS Sawda Volcanic Province in central Libya indicates the presence of either partial melt or an abnormally warm area. This finding suggests that magma reservoirs beneath the Libyan territory may still be partially molten and active, thereby posing significant earthquake and volcanic risks. The hypothesis of an active magma source is further demonstrated though the presence of asthenospheric upwelling and extension of the Sirt Basin. This study provides a new calculation of unconsolidated sediment layers by using the arrival time of the P to S converted phases. The results show sediments thicknesses of 0.4 km to 3.7 km, with the Vp/Vs values ranging from 2.2 to 4.8. The variations in crustal thickness throughout the region are correlated with surface elevation and Bouguer gravity anomalies, which suggest that they are isostatically compensated.

  16. U-Pb SHRIMP-RG zircon ages and Nd signature of lower Paleozoic rifting-related magmatism in the Variscan basement of the Eastern Pyrenees

    Science.gov (United States)

    Martinez, F.J.; Iriondo, A.; Dietsch, C.; Aleinikoff, J.N.; Peucat, J.J.; Cires, J.; Reche, J.; Capdevila, R.

    2011-01-01

    The ages of orthogneisses exposed in massifs of the Variscan chain can determine whether they are part of a pre-Neoproterozoic basement, a Neoproterozoic, Panafrican arc, or are, in fact, lower Paleozoic, and their isotopic compositions can be used to probe the nature of their source rocks, adding to the understanding of the types, distribution, and tectonic evolution of peri-Gondwanan crystalline basement. Using SHRIMP U-Pb zircon geochronology and Nd isotopic analysis, pre-Variscan metaigneous rocks from the N??ria massif in the Eastern Pyrenean axial zone and the Guilleries massif, 70km to the south, have been dated and their Nd signatures characterized. All dated orthogneisses from the N??ria massif have the same age within error, ~457Ma, including the Ribes granophyre, interpreted as a subvolcanic unit within Caradocian sediments contemporaneous with granitic magmas intruded into Cambro-Ordovician sediments at deeper levels. Orthogneisses in the Guilleries massif record essentially continuous magmatic activity during the Ordovician, beginning at the Cambro-Ordovician boundary (488??3Ma) and reaching a peak in the volume of magma in the early Late Ordovician (~460Ma). Metavolcanic rocks in the Guilleries massif were extruded at 452??4Ma and appear to have their intrusive equivalent in thin, deformed veins of granitic gneiss (451??7Ma) within metasedimentary rocks. In orthogneisses from both massifs, the cores of some zircons yield Neoproterozoic ages between ~520 and 900Ma. The age of deposition of a pre-Late Ordovician metapelite in the Guilleries massif is bracketed by the weighted average age of the youngest detrital zircon population, 582??11Ma, and the age of cross-cutting granitic veins, 451??7Ma. Older detrital zircons populations in this metapelite include Neoproterozoic (749-610Ma; n=10), Neo- to Mesoproterozoic (1.04-0.86Ga; n=7), Paleoproterozoic (2.02-1.59Ga; n=5), and Neoarchean (2.74-2.58Ga; n=3). Nd isotopic analyses of the N??ria and Guilleries

  17. Radiometric dating of sediment core from waterwork reservoir Rozgrund and analysis of mercury concentration depth profile

    International Nuclear Information System (INIS)

    Vanek, M.

    2005-01-01

    Radioisotope dating of lake sediments combined with analysis of chemical properties of the sediment layers allow us to study the history of the human impact on nature. Undisturbed sediment layers in the core samples serve as chronicle database with information about lake ecosystem and surrounding environment in the time of deposition. A sediment core sample from the bottom of the water-work reservoir Rozgrund was collected and separated into 2 cm thick layers. Samples were analysed by HPGe spectrometry for anthropogenous Cs-137 activity. From identified peaks corresponding to nuclear tests and Chernobyl accident the sedimentation rate was calculated and the chronology of layers established. Sub-samples from each layer were prepared separately for the analysis of the Hg concentration by atomic absorption spectrometry. The results show very small variations in Hg concentrations and there is no significant trend present in the profile. (author)

  18. Considerations about Santa Catalina Formation northeast of Uruguay

    International Nuclear Information System (INIS)

    Keidel, J.

    1984-01-01

    A serial of land deposits placed in Santa Catharina south Brazil, and northeast of Uruguay. Most of them have been composed with a number of marine sediments, marshy region and swamp from upper paleozoic and low mesozoic.

  19. Using UAVSAR Interferometry to Quantify the Geometry and Sediment Flux of Slow-moving Landslides in the Eel River Catchment, Northern California

    Science.gov (United States)

    Handwerger, A. L.; Huang, M. H.; Booth, A. M.; Fielding, E. J.

    2017-12-01

    Slow-moving, deep-seated landslides are highly erosive features that can remain active for periods of decades to centuries, playing a major role in landscape evolution. In the Eel River catchment, Northern California, slow-moving landslides are the primary contributor of sediment to the channel network, delivering >50% of the regional sediment flux despite occupying mass conservation techniques to 1) invert for landslide thickness and 2) solve for landslide rheology (i.e. depth-averaged velocity), which enables us to better constrain both volume and sediment flux. Our preliminary results indicate that the landslide thickness is highly variable with changes up to tens of meters along the landslide body. We also find that the landslides have a power law rheology with a plug-flow vertical velocity profile. Estimates of sediment flux contributed by individual landslides ranges from 103 to 104 m3/yr. The application of UAVSAR data represents a major advance from previous InSAR studies in this region and provides one of the first datasets containing 3D displacement measurements for multiple landslides occurring under nearly identical environmental conditions. Future work is aimed at using these subsurface and kinematic data to calculate landslide erosion rates and regional sediment flux and to better understand the controls on landslide dynamics over short- and long-timescales.

  20. Polygenetic Karsted Hardground Omission Surfaces in Lower Silurian Neritic Limestones: a Signature of Early Paleozoic Calcite Seas

    Science.gov (United States)

    James, Noel P.; Desrochers, André; Kyser, Kurt T.

    2015-04-01

    Exquisitely preserved and well-exposed rocky paleoshoreline omission surfaces in Lower Silurian Chicotte Formation limestones on Anticosti Island, Quebec, are interpreted to be the product of combined marine and meteoric diagenesis. The different omission features include; 1) planar erosional bedding tops, 2) scalloped erosional surfaces, 3) knobs, ridges, and swales at bedding contacts, and 4) paleoscarps. An interpretation is proposed that relates specific omission surface styles to different diagenetic-depositional processes that took place in separate terrestrial-peritidal-shallow neritic zones. Such processes were linked to fluctuations in relative sea level with specific zones of diagenesis such as; 1) karst corrosion, 2) peritidal erosion, 3) subtidal seawater flushing and cementation, and 4) shallow subtidal deposition. Most surfaces are interpreted to have been the result of initial extensive shallow-water synsedimentary lithification that were, as sea level fell, altered by exposure and subaerial corrosion, only to be buried by sediments as sea level rose again. This succession was repeated several times resulting in a suite of recurring polyphase omission surfaces through many meters of stratigraphic section. Synsedimentary cloudy marine cements are well preserved and are thus interpreted to have been calcitic originally. Aragonite components are rare and thought to have to have been dissolved just below the Silurian seafloor. Large molluscs that survived such seafloor removal were nonetheless leached and the resultant megamoulds were filled with synsedimentary calcite cement. These Silurian inner neritic-strandline omission surfaces are temporally unique. They are part of a suite of marine omission surfaces that are mostly found in early Paleozoic neritic carbonate sedimentary rocks. These karsted hardgrounds formed during a calcite-sea time of elevated marine carbonate saturation and extensive marine cement precipitation. The contemporaneous greenhouse

  1. Sediment Thickness and a WEST-EAST Geologic Cross Section in the Caracas Valley

    OpenAIRE

    KANTAK, PETER; SCHMITZ, MICHAEL; AUDEMARD, FRANCK

    2005-01-01

    Caracas is located at the Caribbean - South America plate boundary zone, with an associated strike slip fault system, which accommodates the relative movement of both plates and is responsible for the seismic hazard in the region. The damage pattern of the 1967 Caracas earthquake emphasized the existence of important site effects due to the sedimentary basin fill of the Caracas valley. A revised map of the sedimentary thickness was developed during this study, based on drill holes (mostly fro...

  2. OU3 sediment dating and sedimentation rates

    International Nuclear Information System (INIS)

    Blair, R.B.; Wolaver, H.A.; Burger, V.M.

    1994-01-01

    Environmental Technologies at Rocky Flats Environmental Technology Site (RFS) investigated the sediment history of Standley Lake, Great Western Reservoir, and Mower Reservoir using 137 Cs and 239,240 Pu global fall-out as dating indicators. These Colorado Front Range reservoirs have been the subject of study by various city, state and national agencies due to suspected Department of Energy Rocky Flats Plant impacts. We performed sediment dating as part of the RCRA Facility Investigation/Remedial Investigation Report for Operable Unit 3. A sediment chronology profile assists scientist in determining the year of sedimentation for a particular peak concentration of contaminants. Radioisotope sediment dating for the three reservoirs indicated sedimentation rates of 0.7 to 0.8 in./yr. for Standley Lake (SL), 0.9 in./yr. for Great Western Reservoir (GWR), and 0.3 in./yr. in Mower Reservoir (MR). RFS sediment dating for Operable Unit 3 compared favorably with the Hardy, Livingston, Burke, and Volchok Standley Lake study. This report describes the cesium/plutonium sediment dating method, estimates sedimentation rates for Operable Unit 3 reservoirs, and compares these results to previous investigations

  3. Full reflector thickness and isolation thickness on neutron transport

    International Nuclear Information System (INIS)

    Sakai, Tomohiro; Naito, Yoshitaka; Komuro, Yuichi.

    1988-08-01

    A method to determine ''full reflector thickness'' and ''isolation thickness'', which is utilized for criticality safety evaluation on nuclear fuel facilities, was proposed in this paper. Firstly, a calculation was tryed to obtain the two kinds of thicknesses from the result of criticality calculations for a specific case. Then, two simple equations which calculates the two kinds of thicknesses were made from the relation between reflector (or isolator) thickness and k eff , and one-group diffusion theory. Finally, we proposed a new method to determine the thicknesses. From the method we proposed, ''full reflector thickness'' and ''isolation thickness'' can be obtain using the equations and migration length of the reflector (or isolator) and infinite and effective multiplication factor of the fuel. (author)

  4. The early warning system of landslides and sediment runoffs using meteorological condition including rainfall-soil moisture index (Invited)

    Science.gov (United States)

    Kubota, T.; Silva, I. C.; Hasnawir, H.

    2009-12-01

    The research including observation of rain, soil moisture content and sediment discharge is conducted on a torrent in northern Kyushu whose geology consists of Paleozoic metamorphic rocks (mainly schist) and whose vegetation consists of mainly Japanese cypress and cedar. Soil depth is approximately 50cm in average and permeability k is 0.1~0.01 order. With data obtained by the observation for more than 4 years, standard rainfalls of warning and evacuation against the sudden sediment runoffs are analyzed. Then, the result was compared with the ones in Nuevo Leon Mexico (geology of schist, slate, k=0.01~0.001 order) and in southern Sulawesi Island Indonesia (volcanic geology, k=0.001~0.0001 order). Hitherto, various methods were proposed to analyze the warning critical standard for landslide disaster or large sediment discharge. In this study, we employed Hirano's element slope runoff theory, the Self Organized Criticality Assumption (SOC), and the Elementary Catastrophe Theory (ETC) to analyze the data, although the soil moisture fluctuation, meteorological condition such as upper air wind and dew point depression, the rainfall-soil moisture index provided by Japan Meteorological Agency was considered. The last one is a cutting edge technology based on the tank model calculation of soil moisture content combined with short term rainfall prediction which is a product of numerical simulation using radar image advection analysis compensated with surface rain data and with orographic rain effect. In Hirano's theory, we can describe the critical rain Rc and rain intensity Ric as following equation. Q/A/M/ cosθ = Ri ∫(r*cosθ)dt = Ri*R (1) ∴ Ric*Rc = C (2) Here, Q: sediment runoff or debris flow discharge, A: watershed area, M: function concerning with sediment deposit features on the upstream torrents or slopes (porosity, torrent bed slope gradient, sediment accumulation length and depth, cohesion), t: time, θ: torrent bed or hillside slope gradient, r: instant

  5. Carbon dioxide gas hydrates accumulation in freezing and frozen sediments

    Energy Technology Data Exchange (ETDEWEB)

    Chuvilin, E.; Guryeva, O. [Moscow State Univ., Moscow (Russian Federation). Dept. of Geology

    2008-07-01

    Carbon dioxide (CO{sub 2}) hydrates and methane hydrates can be formed, and exist under natural conditions. The permafrost area has been considered as an environment for the potential disposal of CO{sub 2}. The favorable factors for preserving CO{sub 2} in liquid and gas hydrate states in frozen sediments and under permafrost horizons are great thickness of frozen sediments; low permeability in comparison with thawed sediments; and favourable conditions for hydrates formation. Therefore, research on the formation and existence conditions of CO{sub 2} gas hydrates in permafrost and under permafrost sediments are of great importance for estimation of CO{sub 2} disposal conditions in permafrost, and for working out specific sequestration schemes. This paper presented the results of an experimental study on the process of carbon dioxide (CO{sub 2}) gas hydrates formation in the porous media of sediments under positive and negative temperatures. Sediment samples of various compositions including those selected in the permafrost area were used. The research was conducted in a special pressure chamber, which allowed to monitor pressure and temperature. The study used the monitoring results in order to make quantitative estimation of the kinetics of CO{sub 2} hydrates accumulation in the model sediments. Results were presented in terms of kinetics of CO{sub 2} hydrates accumulation in the porous media at positive and negative temperatures; kinetics of CO{sub 2} hydrates accumulation in various porous media; gas hydrate-former influence on kinetics of hydrates accumulation in frozen sediments; and influence of freezing on CO{sub 2} hydrates accumulation in porous media. It was concluded that hydrate accumulation took an active place in porous media not only under positive, but also under high negative temperatures, when the water was mainly in the form of ice in porous media. 27 refs., 3 tabs., 5 figs.

  6. Investigation of environmental change on the Tega Lake based on lake sediment analysis. Pt. 2. Dating of sediment by the lead-210/cesium-137 method and environmental change detected by the diatom assemblage analysis

    International Nuclear Information System (INIS)

    Hamada, Takaomi

    1998-01-01

    Sediment collected in the Tega Lake was dated by lead-210/cesium-137 method and environmental change in the Tega Lake was investigated by analysis of diatom remain assemblages in the sediment. Dating of the lead-210/cesium-137 method proved that the surface 30 cm-thickness of sediment in the Tega Lake was deposited during the recent 50 years. Diatom remain assemblage change in the Hon-Tega Lake sediment started in the early half of 1960's and the changes is characterized decrease of Fragilaria construens, that does not prefer to inhabit eutrophic water, and increase of Cyclotella meneghiniana that prefers to inhabit eutrophic water. This diatom assemblage change indicates that the Tega Lake was eutrophicated, and probably suggests water pollution in the Tega Lake. It is detected that influence of residential development around the Tega Lake and reclaiming by drainage on the Tega Lake. (author)

  7. A Simplified Analytic Investigation of the Riverside Effects of Sediment Diversions

    Science.gov (United States)

    2013-09-01

    demonstrated that the river bed consists of a sand layer of variable thickness, underlain by erosion resistant strata (either relict glacial deposits...following analysis. Simplifications and Initial Conditions. Consider a river modeled as a wide rectangular channel of constant width (Figure 1). The...CHETN-VII-13 September 2013 14  Short term effects include the redistribution of sediment by erosion upstream of the diversion to deposition

  8. The geology and geochemistry of Madeira abyssal plain sediments: a review

    International Nuclear Information System (INIS)

    Weaver, P.P.E.; Thomson, J.; Jarvis, I.

    1989-01-01

    The Madeira Abyssal Plain was chosen by the Nuclear Energy Agency (NEA) as a study area for high-level radioactive waste disposal in 1980. Subsequently, the area has been intensively investigated, in particular by the Geological Survey of the Netherlands, the Institute of Oceanographic Sciences, and latterly by the international ESOPE expedition organized by the NEA Seabed Working Group. The large data set from this area of 2 0 x 2 0 includes 16,000 km of low-frequency seismic lines, 28,000 km of high-frequency seismic lines, 70,000 km 2 of GLORIA sidescan and 120 sediment cores. Core coverage extends through the upper 34 m of the sediment column, representing the last 730,000 years, and shows deposition dominated by turbidite sedimentation. Seismic profiles indicate that total thickness of turbidites averages 350 m with about 200 m of pelagic sediment beneath. Thus the turbidites continue considerably deeper than proposed penetrator emplacement depths of 30-70 m. Individual turbidites are separated by thin pelagic layers which can be dated and show the turbidites to be emplaced at the beginning and end of glacial periods. (author)

  9. Vertical profile of 210Pb in the sediment core of Kuala Selangor, Malaysia

    International Nuclear Information System (INIS)

    Choong Chee Choy; Zaharuddin Ahmad; Che Abdul Rahim Mohamed

    2007-01-01

    The activities of 210 Pb was measured to establish the sediment accumulation rates and mixing layer at four studies location (river, estuary and ocean) in the coastal water of Kuala Selangor on February 2, 2005. Sediment cores were collected using a gravity core, which the core sample were taken by inserting a PVC plastic pipe enclosed in a cast-iron tube and it pushed manually as far down as possible. Sediment cores were cut at 3 cm interval for each layer. About 1 ml of 1000 ppm Be, 1 ml of 20 mg/ ml PbNO 3 and 1 ml of 25 mg/ ml FeCl 3 were spiked into 1-2 g of dried homogenized sediment and continue purify with the cation resin column. The precipitation of 210 Pb was counted using the alpha-beta spectrometry at Malaysian Nuclear Agency. Sedimentation and mixing rates were ranged from 0.10 cm/ yr to 0.2 cm/ yr and 0.338 cm 2 / yr to 2.267 cm 2 / yr, respectively. The thickness of mixing layer at locations ranged from surface to 20 cm depth. (author)

  10. Ice thickness estimations based on multi-temporal glacier inventories - potential and challenges

    Science.gov (United States)

    Helfricht, Kay; Huss, Matthias; Otto, Jan-Christoph

    2016-04-01

    The ongoing glacier retreat exposes a large number of surface depressions in the former glacier bed that can be filled with water or act as sediment traps. This has already been observed at various sites in Austria and in other mountain areas worldwide. The formation of glacial lakes can constitute an important environmental and socio-economic impact on high mountain systems including water resource management, sediment delivery, natural hazards, energy production and tourism. In general, information on ice thickness distribution is the basis for simulating future glacier change. We used the approach proposed by Huss and Farinotti (2012) to model the ice thickness distribution and potential locations of subglacial depressions. The study is part of the FUTURELAKE project that seeks to model the formation of new glacier lakes and their possible future evolution in the Austria Alps. The required data on glacier extent, surface elevation and slope were taken from the Austrian Glacier Inventories GI1 from 1969, GI2 from 1998 and GI3 from2006 (Fischer et al., 2015). The different glacier outlines and surface elevations from the inventories enable us to evaluate (i) the robustness of the modelled bedrock depressions with respect to different glacier settings, (ii) the power of the model to simulate recently formed glacial lakes, (iii) the similarities in calculated ice thickness distributions across the inventories and (iv) the feasibility of simulating observed changes in ice thickness and glacier volume. In general, the modelled localization of large potential depressions was relatively stable using the observed glacier settings. A number of examples show that recently formed glacial lakes could be detected by the model based on previous glacier extents. The locations of maximum ice depths within different elevation zones appeared to be sensitive to changes in glacier width. However, observed ice thickness changes and, thus, volume changes between the inventories could

  11. The assessment of the basic movement parameters for marine sediments by means of radiotracer investigations

    International Nuclear Information System (INIS)

    Pruszak, Z.

    1994-01-01

    Interest and practical engineering activity is most often focused on the region of the coastal zone stretching from the shoreline to a depth of the order of several metres. Sediment transport in this region was the object of intensive and complex field studies with the use of radioisotopic tracers. Taking into account the natural features of the sand, glass beads with a diameter of D=0.02-0.025 cm and mass density of 2668 kg/m 3 were prepared. The beads were labelled with Ir-192, with a half time of 74,4 days. The results of analyses lead to the conclusion that the bead load transport most often occurs in a relatively thin layer, exceeding 2 cm only in storm conditions. In the case of weak wave motion this layer has a thickness of several grain diameters, while it may be even 4-6 cm thick in storm conditions. It has been found that for an oblique direction of wave to the shoreline, the local intensity of sediment transport can attain a rate of 40-100 kg/m·hour. The global sediment transport rate has been summed up for the entire surf zone, yielding 7 m 3 /s and much more in storm conditions. (author). 2 refs, 5 figs

  12. Recording of the Holocene sediment infilling in a confined tide-dominated estuary: the bay of Brest (Britanny, France)

    Science.gov (United States)

    Gregoire, Gwendoline; Le Roy, Pascal; Ehrhold, Axel; Jouet, Gwenael; Garlan, Thierry

    2016-04-01

    Modern estuaries constitute key areas for the preservation of sedimentary deposits related to the Holocene period. Several previous studies using stratigraphic reconstructions in such environments allowed to characterise the major parameters controlling the Holocene transgressive sequence and to decipher their respective role in the sedimentary infill: (1) the evolution of main hydrologic factors (wave or tide-dominated environment), (2) the sea level fluctuation and (3) the morphologies of the bedrock and the coastline. Nevertheless, the timing of the transgressive deposits and the detailed facies need to be precise in regard to the stratigraphic schemes. The Bay of Brest (Western Brittany, France) offers the opportunity to examine these points and to compare with previous studies. It constitutes an original tide-dominated estuary that communicates to the open sea (Iroise Sea) by a narrow strait. Two main rivers (Aulne and Elorn) are connected to a submerged paleovalleys network that was incised in the Paleozoic basement during lowstands and still preserved in the present morphology. It delineates the central basin surrounded by tidal flat located in sheltered area. The analysis of high and very-high resolution seismic lines recorded through the whole bay combined with sediment cores (up to 4.5 m long) and radiocarbon dating allow to precise the architecture and the timing of the thick Holocene coastal wedge. It is preserved from the valley network to the shore and presents a longitudinal variability (downstream-upstream evolution). The infill is divided into two successive stages (corresponding to the transgressive and highstand system tracts) which laterally evolve from the paleo-valley to the coast. Two units constitute the transgressive system tract. The oldest, dated from 8200 to 7000 cal B.P. is composed of fine-grained, organic-rich tidal flat deposits located in the sheltered area and organised in levees on the terrace bordering the paleo-valley. A tidal

  13. River sedimentation and channel bed characteristics in northern Ethiopia

    Science.gov (United States)

    Demissie, Biadgilgn; Billi, Paolo; Frankl, Amaury; Haile, Mitiku; Lanckriet, Sil; Nyssen, Jan

    2016-04-01

    Excessive sedimentation and flood hazard are common in ephemeral streams which are characterized by flashy floods. The purposes of this study was to investigate the temporal variability of bio-climatic factors in controlling sediment supply to downstream channel reaches and the effect of bridges on local hydro-geomorphic conditions in causing the excess sedimentation and flood hazard in ephemeral rivers of the Raya graben (northern Ethiopia). Normalized Difference Vegetation Index (NDVI) was analyzed for the study area using Landsat imageries of 1972, 1986, 2000, 2005, 2010, and 2012). Middle term, 1993-2011, daily rainfall data of three meteorological stations, namely, Alamata, Korem and Maychew, were considered to analyse the temporal trends and to calculate the return time intervals of rainfall intensity in 24 hours for 2, 5, 10 and 20 years using the log-normal and the Gumbel extreme events method. Streambed gradient and bed material grain size were measured in 22 river reaches (at bridges and upstream). In the study catchments, the maximum NDVI values were recorded in the time interval from 2000 to 2010, i.e. the decade during which the study bridges experienced the most severe excess sedimentation problems. The time series analysis for a few rainfall parameters do not show any evidence of rainfall pattern accountable for an increase in sediment delivery from the headwaters nor for the generation of higher floods with larger bedload transport capacities. Stream bed gradient and bed material grain size data were measured in order to investigate the effect of the marked decrease in width from the wide upstream channels to the narrow recently constructed bridges. The study found the narrowing of the channels due to the bridges as the main cause of the thick sedimentation that has been clogging the study bridges and increasing the frequency of overbank flows during the last 15 years. Key terms: sedimentation, ephemeral streams, sediment size, bridge clogging

  14. Groundwater exploration in a Quaternary sediment body by shear-wave reflection seismics

    Science.gov (United States)

    Pirrung, M.; Polom, U.; Krawczyk, C. M.

    2008-12-01

    The detailed investigation of a shallow aquifer structure is the prerequisite for choosing a proper well location for groundwater exploration drilling for human drinking water supply and subsequent managing of the aquifer system. In the case of shallow aquifers of some 10 m in depth, this task is still a challenge for high-resolution geophysical methods, especially in populated areas. In areas of paved surfaces, shallow shear-wave reflection seismics is advantageous compared to conventional P-wave seismic methods. The sediment body of the Alfbach valley within the Vulkaneifel region in Germany, partly covered by the village Gillenfeld, was estimated to have a maximum thickness of nearly 60 m. It lies on top of a complicated basement structure, constituted by an incorporated lava flow near the basement. For the positioning of new well locations, a combination of a SH-wave land streamer receiver system and a small, wheelbarrow-mounted SH-wave source was used for the seismic investigations. This equipment can be easily applied also in residential areas without notable trouble for the inhabitants. The results of the 2.5D profiling show a clear image of the sediment body down to the bedrock with high resolution. Along a 1 km seismic profile, the sediment thickness varies between 20 to more than 60 m in the centre of the valley. The reflection behaviour from the bedrock surface corroborates the hypothesis of a basement structure with distinct topography, including strong dipping events from the flanks of the valley and strong diffractions from subsurface discontinuities. The reflection seismic imaging leads to an estimation of the former shape of the valley and a reconstruction of the flow conditions at the beginning of the sedimentation process.

  15. Elastic thickness determination based on Vening Meinesz-Moritz and flexural theories of isostasy

    Science.gov (United States)

    Eshagh, Mehdi

    2018-06-01

    Elastic thickness (Te) is one of mechanical properties of the Earth's lithosphere. The lithosphere is assumed to be a thin elastic shell, which is bended under the topographic, bathymetric and sediment loads on. The flexure of this elastic shell depends on its thickness or Te. Those shells having larger Te flex less. In this paper, a forward computational method is presented based on the Vening Meinesz-Moritz (VMM) and flexural theories of isostasy. Two Moho flexure models are determined using these theories, considering effects of surface and subsurface loads. Different values are selected for Te in the flexural method to see by which one, the closest Moho flexure to that of the VMM is achieved. The effects of topographic/bathymetric, sediments and crustal crystalline masses, and laterally variable upper mantle density, Young's modulus and Poisson's ratio are considered in whole computational process. Our mathematical derivations are based on spherical harmonics, which can be used to estimate Te at any single point, meaning that there is no edge effect in the method. However, the Te map needs to be filtered to remove noise at some points. A median filter with a window size of 5° × 5° and overlap of 4° works well for this purpose. The method is applied to estimate Te over South America using the data of CRUST1.0 and a global gravity model.

  16. Sediment problems in reservoirs. Control of sediment deposits

    Energy Technology Data Exchange (ETDEWEB)

    Jacobsen, Tom

    1997-12-31

    When a reservoir is formed on a river, sediment will deposit in the reservoir. Such processes are unfortunate, for instance, for the implementation of hydroelectric energy. This thesis studies the problem of reservoir sedimentation and discusses methods of removing the sediments. Various aspects of reservoir sedimentation are discussed. Anthropogenic impacts seem to greatly affect the erosion processes. Temporal distribution is uneven, mainly because of the very large flood events. A world map showing the Reservoir Capacity: Annual Sediment Inflow ratio for reservoirs with volume equal to 10% of annual inflow has been prepared. The map shows that sedimentation is severe in the western parts of North and South America, eastern, southern and northern Africa, parts of Australia and most of Asia. The development of medium-sized reservoirs is difficult, as they are too large for conventional flushing technique and too small to store the sediment that accumulates during their economic lifetime. A computer model, SSIIM, was used with good results in a case study of two flood drawdown trials in Lake Roxburg, New Zealand. Two techniques have been developed that permits controlled suction of sediment and water into a pipe: the Slotted Pipe Sediment Sluicer (SPSS) and the Saxophone Sediment Sluicer (SSS). The techniques exploit the inflow pattern in through a slot in a pipe. An equation describing this inflow pattern was derived and verified experimentally. The SPSS is fixed near the reservoir bed, and sediment that deposits on top of it is removed in the sluicing process. The SSS sluices sediment from the surface of the sediment deposits. Some technical and economic conditions affecting the economics of sediment removal from reservoirs have been identified and studied. 79 refs., 112 figs., 14 tabs.

  17. Lake Michigan sediments: in-situ tracer measurements using a rare-earth element

    International Nuclear Information System (INIS)

    Krezoski, J.R.

    1985-01-01

    A rare-earth-element (REE) tracer technique is used to describe in-situ biogenic and physical sediment reworking in Green Bay, Lake Michigan. Europium, a stable, high neutron capture cross section REE, added as Eu 2 O 3 to the sediment-water interface of quadrants of natural bottom muds, served as a tracer of surficial sediment redistribution in an oligochaete-chironomid-sphaerid benthic community. Sixty days after applying a millimeter thick layer of Eu to the undisturbed sediments, divers collected cores from within and around the experimental quadrants that were sectioned in 1 cm intervals to 10 cm and were analyzed by neutron activation analysis. Minute amounts of the activated REE in the sediment, detectable through high resolution gamma spectroscopy, revealed significant burial (to 2.4 cm) and broadening of the marked layer. A calculated bio-diffusion coefficient (K/sub B/ = 2.26 +/- 1.56 x 10 -6 cm 2 sec -1 ), based on a model from earlier microcosm studies, compares remarkably well with experimentally determined values and represents the first application of this model to field data. The method provides reliable estimates of in-situ reworking rates and is more accurate than time-averaged geochronology studies which rely on atmospherically derived radionuclides

  18. The preglacial sediment record of Lake Ladoga, NW Russia - first results from a multi-proxy study on a 23 m sediment record

    Science.gov (United States)

    Gromig, R.; Melles, M.; Wagner, B.; Krastel, S.; Andreev, A.; Fedorov, G.; Just, J.; Wennrich, V.; Savelieva, L.; Subetto, D.; Shumilovskikh, L.

    2016-12-01

    The joint German-Russian project 'PLOT - Paleolimnological Transect' aims to recover lake sediment sequences along a more than 6000 km long longitudinal transect across the Eurasian Arctic in order to study the Late Quaternary climatic and environmental history. The eastern end of the PLOT transect is formed by the well-studied record from Lake El'gygytgyn (NE Siberia). Lake Ladoga (N 60°50' E 31°30') is Europe's largest lake, both by size and volume and forms the westernmost end of the transect. Whereas modern sedimentation as well as the Holocene and Late Glacial history of Lake Ladoga have intensely been studied, the preglacial history of the lake is poorly studied to date by sediment cores drilled in the 1930's. A seismic survey of Lake Ladoga in summer 2013 revealed unconformities in the western lake basin, which may separate preglacial sediments in isolated depressions from Late Glacial and Holocene sediment successions above. A 23 m long sediment core (Co1309) was retrieved from one of these depressions. Core Co1309 was investigated by XRF-scanning, magnetic susceptibility measurements, as well as pollen, grain-size, and bio-geochemical analyses. An age-depth model combining radiocarbon, OSL, and paleomagnetic dates is in progress. Both, the pollen results and the OSL ages from the base of the record indicate a deposition during MIS 5e (Eemian). The well sorted reddish sands from this interval contain dinoflagellates suggesting at least brackish conditions, likely due to the existence of a gateway connecting a precursor of the Baltic Sea with the White Sea via Lake Ladoga. The Late Glacial sequence consists of greyish varved clays of decreasing thickness upwards with sporadically intercalated sand layers. The Holocene sequence is composed of brownish diatomaceous silty clay with minor proportions of sand.

  19. Heterogeneous distribution of pelagic sediments incoming the Japan Trench possibly controlling slip propagation on shallow plate boundary fault

    Science.gov (United States)

    Yamaguchi, A.; Nakamura, Y.; Fukuchi, R.; Kurano, H.; Ikehara, K.; Kanamatsu, T.; Arai, K.; Usami, K.; Ashi, J.

    2017-12-01

    Catastrophic tsunami of the 2011 Tohoku Earthquake was triggered by large coseismic slip reached to the Japan Trench axis (e.g. Fujiwara et al., 2011, Science; Kodaira et al., 2012, Nature Geoscience). Results of the IODP Expedition 343 (JFAST) suggest that small friction of smectite-rich pelagic clay caused slip propagation on shallow plate boundary fault (Ujiie et al., 2013, Science; Kameda et al., 2015, Geology; Moore et al., 2015, Geosphere). On the other hand, JAMSTEC high-resolution seismic profiles show that incoming sediments have large heterogeneities in thicknesses, and two areas of extremely thin sediments on the Pacific Plate (thickness less than 100 m) were found at around 39°N (Nakamura et al., AGU 2017, this session). To reconcile whether the smectite-rich pelagic clay even exists in these areas, we sampled surface sediments during the R/V Shinsei Maru KS-15-3 cruise. Seven piston cores were retrieved from seaward trench slope, horst, graben, and graben edge. Core lithologies are mainly diatomaceous ooze/clay including tephra layers, not resemble to pelagic clays discovered in JFAST. Ages of tephra layers were estimated by correlating mineral assemblages and refractive indices of volcanic glasses to Japanese widespread tephras. Averaged sedimentation rates of seaward trench slope, horst, graben, and graben edge are estimated to be 25-30, 6.5-20, 45, 0.9 cm/kyr, respectively. These sedimentation rates imply that sediments on seaward trench slope and horst have been deposited in the last 160-500 kyr, suggesting that entire pelagic sediments, including smectite-rich pelagic clay, have been removed by some reasons in the last 0.5 million years. Possible reason for such modification of sediment is near-trench igneous activity known as petit-spot volcanism (Hirano et al., 2006, Science). The lack of smectite-rich pelagic clay near 39°N of the Japan Trench is consistent with results of tsunami inversions proposing shallow large coseismic slip propagated

  20. Entrapped Sediments as a Source of Phosphorus in Epilithic Cyanobacterial Proliferations in Low Nutrient Rivers

    Science.gov (United States)

    Wood, Susanna A.; Depree, Craig; Brown, Logan; McAllister, Tara; Hawes, Ian

    2015-01-01

    Proliferations of the benthic mat-forming cyanobacteria Phormidium have been reported in rivers worldwide. Phormidium commonly produces natural toxins which pose a health risk to animal and humans. Recent field studies in New Zealand identified that sites with Phormidium proliferations consistently have low concentrations of water column dissolved reactive phosphorus (DRP). Unlike other river periphyton, Phormidium mats are thick and cohesive, with water and fine sediment trapped in a mucilaginous matrix. We hypothesized that daytime photosynthetic activity would elevate pH inside the mats, and/or night time respiration would reduce dissolved oxygen. Either condition could be sufficient to facilitate desorption of phosphates from sediment incorporated within mats, thus allowing Phormidium to utilize it for growth. Using microelectrodes, optodes and pulse amplitude modulation fluorometry we demonstrated that photosynthetic activity results in elevated pH (>9) during daytime, and that night-time respiration causes oxygen depletion (river water and this, together with elevated concentrations of elements, including iron, suggest phosphorus release from entrapped sediment. Sequential extraction of phosphorus from trapped sediment was used to investigate the role of sediment at sites on the Mangatainoka River (New Zealand) with and without Phormidium proliferations. Deposition of fine sediment (sediment can provide a source of phosphorus to support Phormidium growth and proliferation. PMID:26479491

  1. The life sulfuric: microbial ecology of sulfur cycling in marine sediments.

    Science.gov (United States)

    Wasmund, Kenneth; Mußmann, Marc; Loy, Alexander

    2017-08-01

    Almost the entire seafloor is covered with sediments that can be more than 10 000 m thick and represent a vast microbial ecosystem that is a major component of Earth's element and energy cycles. Notably, a significant proportion of microbial life in marine sediments can exploit energy conserved during transformations of sulfur compounds among different redox states. Sulfur cycling, which is primarily driven by sulfate reduction, is tightly interwoven with other important element cycles (carbon, nitrogen, iron, manganese) and therefore has profound implications for both cellular- and ecosystem-level processes. Sulfur-transforming microorganisms have evolved diverse genetic, metabolic, and in some cases, peculiar phenotypic features to fill an array of ecological niches in marine sediments. Here, we review recent and selected findings on the microbial guilds that are involved in the transformation of different sulfur compounds in marine sediments and emphasise how these are interlinked and have a major influence on ecology and biogeochemistry in the seafloor. Extraordinary discoveries have increased our knowledge on microbial sulfur cycling, mainly in sulfate-rich surface sediments, yet many questions remain regarding how sulfur redox processes may sustain the deep-subsurface biosphere and the impact of organic sulfur compounds on the marine sulfur cycle. © 2017 The Authors. Environmental Microbiology published by Society for Applied Microbiology and John Wiley & Sons Ltd.

  2. Modeled tephra ages from lake sediments, base of Redoubt Volcano, Alaska

    Energy Technology Data Exchange (ETDEWEB)

    Schiff, C J; Kaufman, D S; Wallace, K L; Werner, A; Ku, T L; Brown, T A

    2007-02-25

    A 5.6-m-long lake sediment core from Bear Lake, Alaska, located 22 km southeast of Redoubt Volcano, contains 67 tephra layers deposited over the last 8750 cal yr, comprising 15% of the total thickness of recovered sediment. Using 12 AMS {sup 14}C ages, along with the {sup 137}Cs and {sup 210}Pb activities of recent sediment, we evaluated different models to determine the age-depth relation of sediment, and to determine the age of each tephra deposit. The age model is based on a cubic smooth spline function that was passed through the adjusted tephra-free depth of each dated layer. The estimated age uncertainty of the 67 tephras averages {+-} 105 yr (1{sigma}). Tephra-fall frequency at Bear Lake was among the highest during the past 500 yr, with eight tephras deposited compared to an average of 3.7 per 500 yr over the last 8500 yr. Other periods of increased tephra fall occurred 2500-3500, 4500-5000, and 7000-7500 cal yr. Our record suggests that Bear Lake experienced extended periods (1000-2000 yr) of increased tephra fall separated by shorter periods (500-1000 yr) of apparent quiescence. The Bear Lake sediment core affords the most comprehensive tephrochronology from the base of the Redoubt Volcano to date, with an average tephra-fall frequency of once every 130 yr.

  3. Role of Neogene Exhumation and Sedimentation on Critical-Wedge Kinematics in the Zagros Orogenic Belt, Northeastern Iraq, Kurdistan

    Science.gov (United States)

    Koshnaw, R. I.; Horton, B. K.; Stockli, D. F.; Barber, D. E.; Tamar-Agha, M. Y.; Kendall, J. J.

    2014-12-01

    The Zagros orogenic belt and foreland basin formed during the Cenozoic Arabia-Eurasia collision, but the precise histories of shortening and sediment accumulation remain ambiguous, especially at the NW extent of the fold-thrust belt in Iraqi Kurdistan. This region is characterized by well-preserved successions of Cenozoic clastic foreland-basin fill and deformed Paleozoic-Mesozoic hinterland bedrock. The study area provides an excellent opportunity to investigate the linkage between orogenic wedge behavior and surface processes of erosion and deposition. The aim of this research is to test whether the Zagros orogenic wedge advanced steadily under critical to supercritical wedge conditions involving in-sequence thrusting with minimal erosion or propagated intermittently under subcritical condition involving out-of-sequence deformation with intense erosion. These endmember modes of mountain building can be assessed by integrating geo/thermochronologic and basin analyses techniques, including apatite (U-Th)/He thermochronology, detrital zircon U-Pb geochronology, stratigraphic synthesis, and seismic interpretations. Preliminary apatite (U-Th)/He data indicate activation of the Main Zagros Fault (MZF) at ~10 Ma with frontal thrusts initiating at ~8 Ma. However, thermochronometric results from the intervening Mountain Front Flexure (MFF), located between the MZF and the frontal thrusts, suggest rapid exhumation at ~6 Ma. These results suggest that the MFF, represented by the thrust-cored Qaradagh anticline, represents a major episode of out-of-sequence deformation. Detrital zircon U-Pb analyses from the Neogene foreland-basin deposits show continuous sediment derivation from sources to the NNE in Iraq and western Iran, suggesting that out-of-sequence thrusting did not significantly alter sedimentary provenance. Rather, intense hinterland erosion and recycling of older foreland-basin fill dominated sediment delivery to the basin. The irregular distribution of

  4. Patterns of fossil distributions within their environmental context from the Middle Triassic in South Canyon, Central Nevada, USA

    Directory of Open Access Journals (Sweden)

    Pedro M. Monarrez

    2014-01-01

    Full Text Available The Middle Triassic records the return of diverse marine communities after the severe effects of the end-Permian mass extinction. This diversification leads to the Mesozoic/modern adaptive radiation resulting in substantial changes in marine communities in comparison to their Paleozoic predecessors. This analysis focuses on the faunal abundance, ecological patterns, and environmental interpretation of a Middle Triassic section in Central Nevada. Twelve bulk samples were collected. Visible fossils were identified and tallied from hand samples and thin-sections were used to aid in environmental interpretation. Beginning in the Late Anisian, we observed an ammonoid dominated to flat-clam, epifaunal dominated benthic community within a muddy, quiet, inner shelf depositional environment. Through time, epifaunal bivalves dominate within a middle shelf environment followed by an increase in infaunalization and shell-thickness. During this time the presence of oncoids and the reported finding of corals suggest the middle shelf environment gave way to a higher energy patch reef shelf edge environment. Finally, we observe epifaunal brachiopods communities at the top of our section deposited in a middle shelf environment. In sum, we observe the dominance of modern taxa (i.e., bivalves with Paleozoic ecologies (i.e., epifaunal, followed by the dominance of modern taxa with Modern ecologies (i.e., infaunal, thick shells and then a return to Paleozoic taxa (i.e., brachiopods and Paleozoic ecologies within an overall transgressive environment.

  5. Effect of sediment-water interface 'boundary layer' on exposure of nodules and their abundance: a study from seabed photos

    Digital Repository Service at National Institute of Oceanography (India)

    Sharma, R.

    affects nodule abundance estimates based on photos. A model showing variable burial (or exposure) depending upon the thickness of the Sediment-Water Interface Boundary (SWIB) layer is presented. Standard relationships can be established between nodule...

  6. Testing the impact of miniaturization on phylogeny: Paleozoic dissorophoid amphibians.

    Science.gov (United States)

    Fröbisch, Nadia B; Schoch, Rainer R

    2009-06-01

    Among the diverse clade of Paleozoic dissorophoid amphibians, the small, terrestrial amphibamids and the neotenic branchiosaurids have frequently been suggested as possible antecedents of either all or some of the modern amphibian clades. Classically, amphibamids and branchiosaurids have been considered to represent distinct, but closely related clades within dissorophoids, but despite their importance for the controversial lissamphibian origins, a comprehensive phylogenetic analysis of small dissorophoids has thus far not been attempted. On the basis of an integrated data set, the relationships of amphibamids and branchiosaurids were analyzed using parsimony and Bayesian approaches. Both groups represent miniaturized forms and it was tested whether similar developmental pathways, associated with miniaturization, lead to an artificial close relationship of branchiosaurids and amphibamids. Moreover, the fit of the resulting tree topologies to the distribution of fossil taxa in the stratigraphic rock record was assessed as an additional source of information. The results show that characters associated with a miniaturized morphology are not responsible for the close clustering of branchiosaurids and amphibamids. Instead, all analyses invariably demonstrate a monophyletic clade of branchiosaurids highly nested within derived amphibamids, indicating that branchiosaurids represent a group of secondarily neotenic amphibamid dissorophoids. This understanding of the phylogenetic relationships of small dissorophoid amphibians provides a new framework for the discussion of their evolutionary history and the evolution of characters shared by branchiosaurids and/or amphibamids with modern amphibian taxa.

  7. Antarctic ice sheet thickness estimation based on P-receiver function and waveform inversion

    Science.gov (United States)

    Yan, P.; Li, F.; LI, Z.; Li, J.; Yang, Y.; Hao, W.

    2016-12-01

    Antarctic ice sheet thickness is key parameter and boundary condition for ice sheet model construction, which has great significance for glacial isostatic adjustment, ice sheet mass balance and global change study. Ice thickness acquired utilizing seismological receiver function method can complement and verify with results obtained by radar echo sounding method. In this paper, P-receiver functions(PRFs) are extracted for stations deployed on Antarctic ice sheet, then Vp/Vs ratio and ice thickness are obtained using H-Kappa stacking. Comparisons are made between Bedmap2 dataset and the ice thickness from PRFs, most of the absolute value of the differences are less than 200 meters, only a few reach 600 meters. Taking into account of the intensity of Bedmap2 dataset survey lines and the uncertainty of radio echo sounding, as well as the inherit complexity of the internal ice structure beneath some stations, the ice thickness obtained from receiver function method is reliable. However limitation exists when using H-Kappa stacking method for stations where sediment squeezed between the ice and the bed rock layer. For better verifying the PRF result, a global optimizing method-Neighbourhood algotithm(NA) and spline interpolation are used to modeling PRFs assuming an isotropic layered ice sheet with depth varied densities and velocities beneath the stations. Then the velocity structure and ice sheet thickness are obtained through nonlinear searching by optimally fitting the real and the theoretical PRFs. The obtained ice sheet thickness beneath the stations agree well with the former H-Kappa method, but further detailed study are needed to constrain the inner ice velocity structure.

  8. Link between concentrations of sediment flux and deep crustal processes beneath the European Alps.

    Science.gov (United States)

    Garefalakis, Philippos; Schlunegger, Fritz

    2018-01-09

    Large sediment fluxes from mountain belts have the potential to cause megafans to prograde into the neighbouring sedimentary basins. These mechanisms have been documented based from numerical modelling and stratigraphic records. However, little attention has been focused on inferring temporal changes in the concentrations of supplied sediment from coarse-grained deposits. Here, we extract changes of this variable in the field from a Late Oligocene, c. 4 km-thick suite of fluvial conglomerates situated in the North Alpine foreland basin, which evolved in response to the tectonic and erosional history of the Alps. We measure a decrease in channel depths from >2 m to 20 cm from the base to the top of the suite. These constraints are used to calculate an increase in fan surface slopes from 1.0° based on the Shields criteria for sediment entrainment. We combine slope and bulk grain size data with the Bagnold equation for sediment transport to infer higher concentrations of the supplied sediment. We use these shifts to propose a change towards faster erosion and a steeper landscape in the Alpine hinterland, driven by mantle-scale processes beneath the Alps.

  9. Distribution of 137Cs in sediments in Xiangshan, Xiamen and Yangpu harbours, China

    International Nuclear Information System (INIS)

    Pan, S.; Xu, Q.

    1999-01-01

    Xiangshan Harbour (Zhejing Province), Xiamen Harbour (Fujian Province) and Yangpu Harbour (Hainan Province) are tide-channel type bays, located on the southeast coast of China. Six sediment cores were collected in the Harbours in several projects respectively. Sediment samples were collected with a Lehigh gravity corer which utilized a 10.3 cm diameter, PVC core barrel. Styrofoam sediment core retainers were fitted into the top of the core barrel following core recovery to facilitate core sampling without loss of sediment from the barrel. The core barrels were split lengthwise using a circular saw. Following visual inspection for geological parameters (colour, texture, etc.) and photography of the cores, they were subsampled at 1-2 cm or 5 cm intervals for the entire length of the core. The sediment samples were stored in air-tight, plastic containers and returned to Nanjing University for 137 Cs and other types of analysis. The sediment samples were oven dried at approximately 100 deg. C. at the Nanjing University isotope laboratory and the % loss of water used to determine the wet and dry densities. The contents of 137 Cs were counted using an n-type HPGe γ-ray spectrometry system. The coaxial detector has an efficiency of 25%, with a lead shield 12 cm thick. Each sample was measured for 12h

  10. Persistence of exponential bed thickness distributions in the stratigraphic record: Experiments and theory

    Science.gov (United States)

    Straub, K. M.; Ganti, V. K.; Paola, C.; Foufoula-Georgiou, E.

    2010-12-01

    Stratigraphy preserved in alluvial basins houses the most complete record of information necessary to reconstruct past environmental conditions. Indeed, the character of the sedimentary record is inextricably related to the surface processes that formed it. In this presentation we explore how the signals of surface processes are recorded in stratigraphy through the use of physical and numerical experiments. We focus on linking surface processes to stratigraphy in 1D by quantifying the probability distributions of processes that govern the evolution of depositional systems to the probability distribution of preserved bed thicknesses. In this study we define a bed as a package of sediment bounded above and below by erosional surfaces. In a companion presentation we document heavy-tailed statistics of erosion and deposition from high-resolution temporal elevation data recorded during a controlled physical experiment. However, the heavy tails in the magnitudes of erosional and depositional events are not preserved in the experimental stratigraphy. Similar to many bed thickness distributions reported in field studies we find that an exponential distribution adequately describes the thicknesses of beds preserved in our experiment. We explore the generation of exponential bed thickness distributions from heavy-tailed surface statistics using 1D numerical models. These models indicate that when the full distribution of elevation fluctuations (both erosional and depositional events) is symmetrical, the resulting distribution of bed thicknesses is exponential in form. Finally, we illustrate that a predictable relationship exists between the coefficient of variation of surface elevation fluctuations and the scale-parameter of the resulting exponential distribution of bed thicknesses.

  11. Mesozoic architecture of a tract of the European-Iberian continental margin: Insights from preserved submarine palaeotopography in the Longobucco Basin (Calabria, Southern Italy)

    Science.gov (United States)

    Santantonio, Massimo; Fabbi, Simone; Aldega, Luca

    2016-01-01

    The sedimentary successions exposed in northeast Calabria document the Jurassic-Early Cretaceous tectonic-sedimentary evolution of a former segment of the European-Iberian continental margin. They are juxtaposed today to units representing the deformation of the African and Adriatic plates margins as a product of Apenninic crustal shortening. A complex pattern of unconformities reveals a multi-stage tectonic evolution during the Early Jurassic, which affected the facies and geometries of siliciclastic and carbonate successions deposited in syn- and post-rift environments ranging from fluvial to deep marine. Late Sinemurian/Early Pliensbachian normal faulting resulted in exposure of the Hercynian basement at the sea-floor, which was onlapped by marine basin-fill units. Shallow-water carbonate aprons and reefs developed in response to the production of new accommodation space, fringing the newborn islands which represent structural highs made of Paleozoic crystalline and metamorphic rock. Their drowning and fragmentation in the Toarcian led to the development of thin caps of Rosso Ammonitico facies. Coeval to these deposits, a thick (> 1 km) hemipelagic/siliciclastic succession was sedimented in neighboring hanging wall basins, which would ultimately merge with the structural high successions. Footwall blocks of the Early Jurassic rift, made of Paleozoic basement and basin-margin border faults with their onlapping basin-fill formations, are found today at the hanging wall of Miocene thrusts, overlying younger (Middle/Late Jurassic to Late Paleogene) folded basinal sediments. This paper makes use of selected case examples to describe the richly diverse set of features, ranging from paleontology to sedimentology, to structural geology, which are associated with the field identification of basin-margin unconformities. Our data provide key constraints for restoring the pre-orogenic architecture of a continental margin facing a branch of the Liguria-Piedmont ocean in the

  12. The Shale Gas potential of Lower Carboniferous Sediments in Germany

    Science.gov (United States)

    Kerschke, D.; Mihailovic, A.; Schulz, H., -M.; Horsfield, B.

    2012-04-01

    Organic-rich Carboniferous sediments are proven source rocks for conventional gas systems in NW Europe and are likely gas shale candidates. Within the framework of GeoEnergie, an initiative to strengthen scientific excellence, funded by the German Ministry of Education and Research (BMBF), the influence of palaeogeography and basin dynamics on sedimentology and diagenesis is being investigated. Our aim is to unravel the evolution of shale gas-relevant properties which control gas prospectivity and production parameters like porosity, brittleness, etc. for the Lower Carboniferous in Germany. Northern Germany is underlain by thick, mudstone-bearing Carboniferous successions with a wide range of thermal maturities. Some of these mudstone horizons are rich in organic carbon which is either of marine and/or terrigenous origin. During the Carboniferous deposition of fine-grained, TOC-rich basinal sediments changed into shallow marine to paralic siliciclastic sediments (carbonates during the Lower Carboniferous) in the north, and grade into coarse-grained sediments close to the uprising Variscan mountains in the south. As a result different architectural elements including TOC-rich fine-grained sediments like basinal shales, fine-grained parts of turbidites, and shallow marine mudstones occur in both the Lower and the Upper Carboniferous section. A high shale gas potential occurs in basinal shales of Namurian age with marine organic material and TOC contents of up to 8 % (Rhenish Alum Shales). Such sediments with thermal maturities between 1.3 to 3.0 % vitrinite reflectance and sufficient quartz contents occur in wide areas of present-day Central European Basins System (CEBS), and are at favourable depth for shale gas exploration predominantly along the southern CEBS margin.

  13. Temporal shifts in reef lagoon sediment composition, Discovery Bay, Jamaica

    Science.gov (United States)

    Perry, Christopher T.; Taylor, Kevin G.; Machent, Philip G.

    2006-03-01

    Discovery Bay, north Jamaica, forms a large (1.5 km wide), deep (up to 56 m) embayment that acts as a sink for reef-derived and lagoonal carbonate sediments. Since the mid-1960s, the bay has also provided a sink for inputs of bauxite sediment that are spilled during loading at a boat terminal constructed within Discovery Bay. Bauxite has accumulated across much of the southern section of the bay with surficial sediments presently composed of up to 35 weight% non-carbonate. Cores recovered from sites on the western side of the bay provide a stratigraphic record of this history of bauxite contamination across water depths from 5 to 25 m. The bauxite-influenced upper sediment horizons are clearly visible in each core from the distinctive red-brown colouration of the sediment. These sediments are composed of approximately 10% non-carbonate (bauxite) and have Fe contents of around 2-3000 μg/g (up to 7000 μg/g). The thickness of this upper bauxite-contaminated sequence increases down transect (approximately 18 cm in the shallowest core, to around 47 cm in the deepest core), and in each core overlies a sequence of 'clean' lagoon carbonates. These typically are poorly sorted carbonate sands with variable amounts of coral rubble. Down-core data on CaCO 3 and Fe content provide a chemical record of decreasing sediment contamination with depth, with the lower 'clean' carbonates composed of only around 2% non-carbonate and coral, mollusc, Amphiroa and Halimeda in the clean lagoon sands, to assemblages dominated by Halimeda and Amphiroa within the surficial sediments. At the deeper sites, no major down-core shifts in sediment constituents occur. These sites thus record a rather complex history of changes in sediment composition and chemistry. Clear shifts in chemistry and stratigraphy occur in all the cores and reflect progressive bauxite contamination in the near-surface horizons. These inputs, however, do not appear to have directly affected carbonate production, since the

  14. The SPACE 1.0 model: a Landlab component for 2-D calculation of sediment transport, bedrock erosion, and landscape evolution

    Science.gov (United States)

    Shobe, Charles M.; Tucker, Gregory E.; Barnhart, Katherine R.

    2017-12-01

    Models of landscape evolution by river erosion are often either transport-limited (sediment is always available but may or may not be transportable) or detachment-limited (sediment must be detached from the bed but is then always transportable). While several models incorporate elements of, or transition between, transport-limited and detachment-limited behavior, most require that either sediment or bedrock, but not both, are eroded at any given time. Modeling landscape evolution over large spatial and temporal scales requires a model that can (1) transition freely between transport-limited and detachment-limited behavior, (2) simultaneously treat sediment transport and bedrock erosion, and (3) run in 2-D over large grids and be coupled with other surface process models. We present SPACE (stream power with alluvium conservation and entrainment) 1.0, a new model for simultaneous evolution of an alluvium layer and a bedrock bed based on conservation of sediment mass both on the bed and in the water column. The model treats sediment transport and bedrock erosion simultaneously, embracing the reality that many rivers (even those commonly defined as bedrock rivers) flow over a partially alluviated bed. SPACE improves on previous models of bedrock-alluvial rivers by explicitly calculating sediment erosion and deposition rather than relying on a flux-divergence (Exner) approach. The SPACE model is a component of the Landlab modeling toolkit, a Python-language library used to create models of Earth surface processes. Landlab allows efficient coupling between the SPACE model and components simulating basin hydrology, hillslope evolution, weathering, lithospheric flexure, and other surface processes. Here, we first derive the governing equations of the SPACE model from existing sediment transport and bedrock erosion formulations and explore the behavior of local analytical solutions for sediment flux and alluvium thickness. We derive steady-state analytical solutions for

  15. Hydraulic properties of the Midville Aquifer at the Savannah River Site, South Carolina

    International Nuclear Information System (INIS)

    Hodges, R.A.; Snipes, D.S.; Benson, S.M.; Daggett, J.S.; Temples, T.; Harrelson, L.

    1994-01-01

    Aquifer performance tests of the Midville Aquifer System were conducted at the Savannah River Site (SRS) in South Carolina. The stratigraphic section of interest consists of Late Cretaceous Coastal Plain sediments. Within the study area, the Midville Aquifer System is composed of sand aquifers separated by discontinuous clay lenses. The Midville is underlain by the Appleton Confining Unit which is separated from underlying Triassic sediments and Paleozoic crystallines by a regional unconformity. This unconformable surface has a dip of 10 m/km to the southeast. The Midville is overlain by the Allendale Confining Unit which separates the Midville from the Dublin Aquifer System. The tests were performed at B and P Areas within the SRS using production wells screened in the Midville Aquifer and monitor well clusters screened in the Midville, Dublin, and Gordon (Eocene) Aquifers. The B Area is located 13 km updip from P Area. The Midville is about 50 meters thick at B Area and 80 meters thick at P Area. The transmissivity of the Midville is 0.0095 m 2 /s at B Area and 0.017 m 2 /s at P Area. The storativity at both areas is about 10 -4 . Vertical leakance of the Midville is greater updip as the stratigraphic section thins. During the B Area test, pumping induced water level changes were detected in aquifers above the Midville. At P Area, no pumping induced water level changes were detected above the Midville Aquifer System

  16. Paleogeographic significance of Clavohamulus hintzei Miller (Conodonta) and other Ibexian conodonts in an early Paleozoic carbonate platform facies of the Argentine Precordillera

    Science.gov (United States)

    Lehnert, O.; Miller, J.F.; Repetski, J.E.

    1997-01-01

    Pre-Tremadocian conodonts and trilobites and Tremadocian conodonts are reported from the Cambrian and Ordovician La Silla Formation in the Cerro La Silla section in east-southeast Ja??chal, San Juan Province, Argentina. A shallow marine conodont fauna contains elements of Clavohamulus hintzei Miller, a common species in North America, but reported for the first time from the early Paleozoic platform carbonates of the western Argentine Precordillera. The presence of this species suggests a correlation with the Clavohamulus hintzei conodont subbiozone of the Cordylodus intermedius conodont biozone in North America, considered Early Ordovician (Skullrockian Stage, Ibexian Series) in North America, but by South American and European standards, this biozone would be of latest Cambrian age. C. hintzei and associated conodonts of the La Silla Formation are typical of the tropical faunas of the North American Midcontinent Faunal Province; Late Cambrian trilobites from lower in the formation also are typical North American taxa. The presence of these faunas in the platform carbonates is consistent with plate reconstructions suggesting that the Precordillera was in a tropical or subtropical position close to Laurentia during the late Precambrian and early Paleozoic. These new paleontological data provide one more argument for recent models of the Precordillera as a displaced terrane derived from the Ouachita Embayment at the southern margin of Laurentia.

  17. Thickness of Weathering Profiles:Relaying Tectonic Signal to Biogeochemical Cycles

    Science.gov (United States)

    Yoo, K.; Weinman, B. A.; Hurst, M. D.; Mudd, S. M.; Gabet, E. J.; Attal, M.; Maher, K.

    2011-12-01

    Generation and transport of sediment across hillslopes and rivers are closely tied to mechanisms that produce and remove weathered material; in uplands this production and transport controls the thicknesses of weathering profiles. These processes, by controlling the residence time of minerals in the weathering profiles, further regulate the interactions between these minerals and largely biologically cycled elements like carbon and calcium. Here, we present and discuss the thicknesses of colluvial soils and underlying saprolites along three hillslopes that are subject to different rates of basal channel incision. Our field site is within a tributary basin to the Middle Folk Feather River in the Northern Sierra Nevada of California where the river has been down cutting through an uplifting granitic batholith over the past five to ten million years. Conventional modeling predicts that colluvial soil thickness declines with increasing denudation rates. Contrary to this expectation, intensive measurements of colluvial soil thickness show largely consistent values across the three hillslopes examined. This finding, in combination with the abrupt transitions to partial or full bare-rock landscapes with further increase in slope curvature or greater proximity to the Middle Folk Feather River, suggests that the mechanisms of soil production are capable of keeping pace with physical erosion rate until a certain threshold erosion rate is reached. We observe, however, that thicknesses of the underlying saprolite and the morphology (eg., color and texture) and geochemistry (eg., elemental concentration and extraction chemistry of iron) of both colluvial soil and saprolite materials vary systematically with the total denudation rates. This finding further allows us to build a simple relationship to describe and predict how the changes in erosion rates translate to the soils' capacity to store biologically cycled elements within rooting depths. Therefore, geomorphic and

  18. Sediment morpho-dynamics induced by a swirl-flow: an experimental study

    Science.gov (United States)

    Gonzalez-Vera, Alfredo; Duran-Matute, Matias; van Heijst, Gertjan

    2016-11-01

    This research focuses on a detailed experimental study of the effect of a swirl-flow over a sediment bed in a cylindrical domain. Experiments were performed in a water-filled cylindrical rotating tank with a bottom layer of translucent polystyrene particles acting as a sediment bed. The experiments started by slowly spinning the tank up until the fluid had reached a solid-body rotation at a selected rotation speed (Ωi). Once this state was reached, a swirl-flow was generated by spinning-down the system to a lower rotation rate (Ωf). Under the flow's influence, particles from the bed were displaced, which changed the bed morphology, and under certain conditions, pattern formation was observed. Changes in the bed height distribution were measured by utilizing a Light Attenuation Technique (LAT). For this purpose, the particle layer was illuminated from below. Images of the transmitted light distribution provided quantitative information about the local thickness of the sediment bed. The experiments revealed a few characteristic regimes corresponding to sediment displacement, pattern formation and the occurrence of particle pick-up. Such regimes depend on both the Reynolds (Re) and Rossby (Ro) numbers. This research is funded by CONACYT (Mexico) through the Ph.D. Grant (383903) and NWO (the Netherlands) through the VENI Grant (863.13.022).

  19. Feasibility of high level radioactive waste disposal in deep sea sediments

    International Nuclear Information System (INIS)

    Buckley, D.E.

    1987-01-01

    For the past ten years, an international program has been conducted to investigate the concept feasibility for disposing of spent nuclear fuel waste in deep ocean sediments. These studies by the Seabed Working Group were coordinated by the Nuclear Energy Agency of the Organization for Economic Cooperation and Development. Penetrators have been considered as the primary method of waste emplacement. This required emphasis on studies of the nature of the plastic sediments which would form the primary barrier to the release of radionuclides into the biosphere. Site qualification guidelines, included criteria for tectonic and sedimentary stability over periods of at least 10 5 years. Using these guidelines two potential areas were identified: one in the Madeira Abyssal Plain; and one in the Southern Nares Abyssal Plain, both in the North Atlantic. The sediment barrier properties are quite different in terms of dominant mineralogy (carbonates in MAP, and silicous clays in SNAP). The MAP is dominated by thick wide-spread turbidites, but SNAP is dominated by thin discontinuous turbidites

  20. Impedance-matching hearing in Paleozoic reptiles: evidence of advanced sensory perception at an early stage of amniote evolution.

    Directory of Open Access Journals (Sweden)

    Johannes Müller

    Full Text Available BACKGROUND: Insights into the onset of evolutionary novelties are key to the understanding of amniote origins and diversification. The possession of an impedance-matching tympanic middle ear is characteristic of all terrestrial vertebrates with a sophisticated hearing sense and an adaptively important feature of many modern terrestrial vertebrates. Whereas tympanic ears seem to have evolved multiple times within tetrapods, especially among crown-group members such as frogs, mammals, squamates, turtles, crocodiles, and birds, the presence of true tympanic ears has never been recorded in a Paleozoic amniote, suggesting they evolved fairly recently in amniote history. METHODOLOGY/PRINCIPAL FINDINGS: In the present study, we performed a morphological examination and a phylogenetic analysis of poorly known parareptiles from the Middle Permian of the Mezen River Basin in Russia. We recovered a well-supported clade that is characterized by a unique cheek morphology indicative of a tympanum stretching across large parts of the temporal region to an extent not seen in other amniotes, fossil or extant, and a braincase specialized in showing modifications clearly related to an increase in auditory function, unlike the braincase of any other Paleozoic tetrapod. In addition, we estimated the ratio of the tympanum area relative to the stapedial footplate for the basalmost taxon of the clade, which, at 23:1, is in close correspondence to that of modern amniotes capable of efficient impedance-matching hearing. CONCLUSIONS/SIGNIFICANCE: Using modern amniotes as analogues, the possession of an impedance-matching middle ear in these parareptiles suggests unique ecological adaptations potentially related to living in dim-light environments. More importantly, our results demonstrate that already at an early stage of amniote diversification, and prior to the Permo-Triassic extinction event, the complexity of terrestrial vertebrate ecosystems had reached a level that

  1. A new macrofaunal limit in the deep biosphere revealed by extreme burrow depths in ancient sediments.

    Science.gov (United States)

    Cobain, S L; Hodgson, D M; Peakall, J; Wignall, P B; Cobain, M R D

    2018-01-10

    Macrofauna is known to inhabit the top few 10s cm of marine sediments, with rare burrows up to two metres below the seabed. Here, we provide evidence from deep-water Permian strata for a previously unrecognised habitat up to at least 8 metres below the sediment-water interface. Infaunal organisms exploited networks of forcibly injected sand below the seabed, forming living traces and reworking sediment. This is the first record that shows sediment injections are responsible for hosting macrofaunal life metres below the contemporaneous seabed. In addition, given the widespread occurrence of thick sandy successions that accumulate in deep-water settings, macrofauna living in the deep biosphere are likely much more prevalent than considered previously. These findings should influence future sampling strategies to better constrain the depth range of infaunal animals living in modern deep-sea sands. One Sentence Summary: The living depth of infaunal macrofauna is shown to reach at least 8 metres in new habitats associated with sand injections.

  2. Granitoids of the Dry Valleys area, southern Victoria Land : geochemistry and evolution along the early Paleozoic Antarctic Craton margin

    International Nuclear Information System (INIS)

    Allibone, A.H.; Cox, S.C.; Smillie, R.W.

    1993-01-01

    Field relationships and geochemistry indicate granitoid plutons of the Dry Valleys area comprise at least three petrogenetically distinct suites. The older Dry Valleys 1a (DV1a) suite, comprising the Bonney, Catspaw, Denton, Cavendish, and Wheeler Plutons and hornblende-biotite orthogneisses, and Dry Valleys 1b (DV1b) suite, comprising the Hedley, Valhalla, St Johns, Dun, Calkin, and Suess Plutons, biotite granitoid dikes and biotite orthogneisses, were emplaced before prominent swarms of Vanda mafic and felsic dikes. Both the DV1a and DV1b suites are time transgressive, with older intrusions in each suite being emplaced during the later stages of deformation of the Koettlitz Group. Younger granitoids that postdate the majority of the Vanda dikes include: the Dry Valleys 2 (DV2) suite, comprising the Pearse and Nibelungen Plutons plus several smaller, unnamed plugs; and the Harker, Swinford, Orestes, and Brownworth Plutons with identical field relationships and enclaves but distinct chemistries. Chemical characteristics and limited Rb-Sr isotopic dating indicate plutonism before c. 500 Ma was dominated by the Cordilleran I-type DV1a suite, inferred to have developed during melting above a west-dipping subduction zone along the Antarctic Craton margin. The chemical characteristics of the DV1b suite indicate large-scale melting of a quartzo-feldspathic protolith lacking residual plagioclase, but containing refractory garnet. Potential DV1b suite source rocks include metamorphosed immature sediments, possibly underplated along the subduction zone associated with DV1a magmatism, or older granitoid orthogneisses. Major DV1b plutonism at 490 Ma marks the end of subduction-related plutonism in southern Victoria Land. Younger DV2 alkali-calcic, Caledonian I-type plutonism is inferred to have formed in response to uplift and extension between 480 and 455 Ma. Lack of DV2 suite correlatives and Vanda mafic and felsic dikes in northern Victoria Land suggests significantly

  3. Cenozoic North American Drainage Basin Evolution, Sediment Yield, and Accumulation in the Gulf of Mexico Basin

    Science.gov (United States)

    Galloway, W.; Ganey-Curry, P. E.

    2010-12-01

    The Cenozoic fill of the Gulf of Mexico basin contains a continuous record of sediment supply from the North American continental interior for the past 65 million years. Regional mapping of unit thickness and paleogeography for 18 depositional episodes defines patterns of shifting entry points of continental fluvial systems and quantifies the total volume of sediment supplied during each episode. Eight fluvio-deltaic depocenters, named for geographic similarities to entry points and drainage basins of modern rivers, are present. From southwest to northeast, they are the Rio Bravo, Rio Grande, Guadalupe, Colorado, Houston-Brazos, Red, Mississippi, and Tennessee axes. Sediment volume was calculated from hand-contoured unit thickness maps compiled from basin-wide well and seismic control. Using a GIS algorithm to sum volumes within polygons bounding interpreted North American river contribution, the total extant volume was then calculated. General compaction factors were used to convert modern volume to quantitative approximations of total grain volume. Grain volume rate of supply for each depositional episode was then calculated. Values vary by more than an order of magnitude. Supply rate has commonly varied by two-fold or more between successive depositional episodes. Sediment supply is a significant, independent variable in development of stratigraphic sequences within the Gulf basin. Paleogeographic maps of the continental interior for eleven Cenozoic time intervals display the evolving and complex interplay of intracontinental tectonism, climate change, and drainage basin evolution. Five tectono-climatic eras are differentiated: Paleocene late Laramide era; early to middle Eocene terminal Laramide era; middle Cenozoic (Late Eocene—Early Miocene) dry, volcanogenic era; middle Neogene (Middle—Late Miocene) arid, extensional era; and late Neogene (Plio—Pleistocene) monsoonal, epeirogenic uplift era. Sediment supply to the GOM reflects the interplay of (1

  4. Cyclic Sediment Trading Between Channel and River Bed Sediments

    Science.gov (United States)

    Haddadchi, A.

    2015-12-01

    Much of the previous work on sediment tracing has focused on determining either the initial sources of the sediment (soils derive from a particular rock type) or the erosion processes generating the sediment. However, alluvial stores can be both a source and sink for sediment transported by streams. Here geochemical and fallout radionuclide tracing of river-bed and alluvial sediments are used to determine the role of secondary sources, sediment stores, as potential sources of sediment leaving Emu Creek catchment, southeastern Queensland, Australia. Activity concentrations of 137Cs on the river sediments are consistent with channel erosion being the dominant source at all sites sampled along the river. To characterise the deposition and remobilisation cycles in the catchment, a novel geochemical tracing approach was used. Successive pockets of alluvium were treated as discrete sink terms within geochemical mixing models and their source contributions compared with those of river bed sediments collected adjacent to each alluvial pocket. Three different size fractions were examined; silts and clays (banks indicates a high degree of 'trading' between the fluvial space and the alluvial space. Hence, management works aimed at primarily reducing the supply of sediments to the outlet of Emu Creek should focus on rehabilitation of channel banks in the lower catchment.

  5. Uranium mineralization rules controlled by sedimentation in Bayanwula region in Erlian basin

    International Nuclear Information System (INIS)

    Lu Chao

    2012-01-01

    Uranium mineralization is closely related to sedimentation in Bayanwula region in Erlian Basin. Clarifying the relation of sedimentation and Uranium Mineralization Through detailed analysis of vertical sequences, stratigraphic correlation and the heterogeneity of sand body. Study show that the of development characteristics of sequences of Bayanwula region control the vertical positioning of favorable sand, the skeleton sand bodies of LST in upper Saihan formation is the most favorable reservoir space for uranium. Uranium mineralization is closely related with the heterogeneity of the sand bodies of upper Saihan formation. the heterogeneity of Sand body is mainly reflected in plane and vertical. In plane, with the research of the sand distributed system of upper Saihan formation, the change position of sandstone thickness and sand rate, the position of the variation of shape and trend of sand body, and the change position of sand body character and genesis are most favorable for uranium mineralization. In vertical, the number of layers and thickness of isolated barrier bed not only control the thickness of oxide sandstone. but also they are associated with the distribution of uranium mineralization; The evolution of sedimentary basins created Bayanwula uranium deposits. There is a second order sequence boundary between the upper Saihan formation and the Erlian formation of Late Cretaceous, which is a long-term exposure and erosion unconformity, resulting in the partly erosion of the upper Saihan formation, providing the best conditions of the penetration of the uranium-bearing oxygen water and the development of phreatic oxidation and interlayer oxidation zone. (author)

  6. The origin of the Bambui group in the context of the geotectonic evolution and radiometric ages

    International Nuclear Information System (INIS)

    Thomaz Filho, Antonio; Kawashita, Koji; Cordani, Umberto Giuseppe

    1998-01-01

    The fragmentation of the Rodinia Supercontinent, around 1000 Ma, produced rifted fragments of continental masses, some of which suffered important sedimentation processes under the influence of large scale continental glaciations. Among these deposits, over the Sao Francisco Craton, the Macaubas Group, the Ibia Group, as well as the Bebedouro and Jequitai Formations, may be mentioned. The sedimentation of the Bambui Group is related to the successive large geotectonic process of agglutination of Gondwana, during the Neoproterozoic to Early paleozoic Brasiliano Orogenic Cycle. The principal evidence are as follows: - sedimentary, structural and metamorphic unconformities between the Bambui group and the Macaubas and Bebedouro sequences: - sedimentation of the Bambui group directly over the basement exposures of the Sao Francisco Craton; - drastic shift from glacial (Macaubas Group and Bebedouro Formation) to the platform carbonatic sedimentary environment of the Bambui Group; and - polimictic megaconglomeratic layers, including deformed basement detrital fragments, inter bedded with thick pelites and limestones of the Bambui Group, indicating a source are with rugged topography. The above evidences converge to the interpretation of the Bambui Group as formed in a foreland basin over the Sao Francisco Craton, and associated to the successive activities of thrust fronts originated in the adjacent mobile belt. This resulted in a cyclic sedimentation, followed by the final molassic-type sedimentation of the Tres Marias Formation. SInce the compressive pulses of the Brasiliano Orogenic Cycle, as determined in the adjacent Aracuai mobile belt, are comprised in the 650-500 Ma interval, the present authors indicate that the maximum sedimentation age of the Bambui group shall be close to 650 Ma. (author)

  7. Sedimentation survey of Lago Cerrillos, Ponce, Puerto Rico, April-May 2008

    Science.gov (United States)

    Soler-López, Luis R.

    2011-01-01

    Lago Cerrillos dam, located in the municipality of Ponce in southern Puerto Rico, was constructed in 1991 as part of the multipurpose Rio Portugues and Bucana Project. This project provides flood protection, water supply, and recreation facilities for the municipio of Ponce. The reservoir had an original storage capacity of 38.03 million cubic meters at maximum conservation pool elevation of 174.65 meters above mean sea level and a drainage area of 45.32 square kilometers. Sedimentation in Lago Cerrillos reservoir has reduced the storage capacity from 38.03 million cubic meters in 1991 to 37.26 million cubic meters in 2008, which represents a total storage loss of about 2 percent. During July 29 to August 23, 2002, 8,492 cubic meters of sediment were removed from the Rio Cerrillos mouth of the reservoir. Taking into account this removed material, the total water-storage loss as of 2008 is 778,492 cubic meters, and the long-term annual water-storage capacity loss rate is about 45,794 cubic meters per year or about 0.12 percent per year. The Lago Cerrillos net sediment-contributing drainage area has an average sediment yield of about 1,069 cubic meters per square kilometer per year. Sediment accumulation in Lago Cerrillos is not uniformly distributed and averages about 3 meters in thickness. This represents a sediment deposition rate of about 18 centimeters per year. On the basis of the 2008 reservoir storage capacity of 37.26 million cubic meters per year and a long-term sedimentation rate of 45,794 cubic meters per year, Lago Cerrillos is estimated to have a useful life of about 814 years or until the year 2822.

  8. U-Pb ages of detrital zircon from Cenozoic sediments in the southwestern Tarim Basin, NW China: Implications for Eocene-Pliocene source-to-sink relations and new insights into Cretaceous-Paleogene magmatic sources

    Science.gov (United States)

    Yang, Wei; Fu, Ling; Wu, Chaodong; Song, Yan; Jiang, Zhenxue; Luo, Qun; Zhang, Ziya; Zhang, Chen; Zhu, Bei

    2018-05-01

    A detailed investigation of potential provenance is still lacking in the southwestern Tarim Basin, which restricts our complete understanding of Cenozoic source-to-sink relations between the basin interior and the Pamir salient - western Kunlun Mountain Range. Debate also exists concerning the potential sources of the Paleogene and Cretaceous igneous detritus present in the Cenozoic sedimentary sequences. Here, we present U-Pb (LA-ICP-MS) ages of detrital zircons from the continuous Eocene-Pliocene sediment series in the well-exposed Aertashi section to investigate changes in sediment provenance through time. The U-Pb detrital zircon ages range widely from 45 to 3204 Ma and can be divided into seven main groups: 45-65 Ma (sub-peak at 49 Ma), 67-103 Ma (sub-peak at 95 Ma), 196-251 Ma (sub-peak at 208 Ma), 252-416 Ma (sub-peak at 296 Ma), 417-540 Ma (sub-peak at 446 Ma), 550-1429 Ma (sub-peaks at 614 Ma, 828 Ma and 942 Ma) and 1345-3204 Ma (sub-peaks at 1773 Ma and 2480 Ma). These zircons were mainly derived from the western Kunlun Mountain Range and northern Pamir salient to the west and south. The evolution of the provenance and source-to-sink relationship patterns in the southwestern Tarim Basin can be divided into three stages: (1) The Middle Eocene to Lower Oligocene sediments display a wide variety of detrital zircon ages, suggesting that the source area was extensive. (2) A major change in provenance occurred during the Late Oligocene to Early Miocene and was characterized by an abrupt increase in the proportion of Triassic and Lower Paleozoic igneous components, implying a significant adjustment in topography induced by the initial uplift and exhumation of the western Kunlun Mountain Range and northern Pamir salient. (3) In the Late Miocene, the source-to-sink system transformed again, and contributions of Triassic to Lower Paleozoic material weakened substantially due to the sufficient indentation of the Pamir salient. Our integrated analyses of zircon

  9. Functional trait responses to sediment deposition reduce macrofauna-mediated ecosystem functioning in an estuarine mudflat

    Science.gov (United States)

    Mestdagh, Sebastiaan; Bagaço, Leila; Braeckman, Ulrike; Ysebaert, Tom; De Smet, Bart; Moens, Tom; Van Colen, Carl

    2018-05-01

    Human activities, among which dredging and land use change in river basins, are altering estuarine ecosystems. These activities may result in changes in sedimentary processes, affecting biodiversity of sediment macrofauna. As macrofauna controls sediment chemistry and fluxes of energy and matter between water column and sediment, changes in the structure of macrobenthic communities could affect the functioning of an entire ecosystem. We assessed the impact of sediment deposition on intertidal macrobenthic communities and on rates of an important ecosystem function, i.e. sediment community oxygen consumption (SCOC). An experiment was performed with undisturbed sediment samples from the Scheldt river estuary (SW Netherlands). The samples were subjected to four sedimentation regimes: one control and three with a deposited sediment layer of 1, 2 or 5 cm. Oxygen consumption was measured during incubation at ambient temperature. Luminophores applied at the surface, and a seawater-bromide mixture, served as tracers for bioturbation and bio-irrigation, respectively. After incubation, the macrofauna was extracted, identified, and counted and then classified into functional groups based on motility and sediment reworking capacity. Total macrofaunal densities dropped already under the thinnest deposits. The most affected fauna were surficial and low-motility animals, occurring at high densities in the control. Their mortality resulted in a drop in SCOC, which decreased steadily with increasing deposit thickness, while bio-irrigation and bioturbation activity showed increases in the lower sediment deposition regimes but decreases in the more extreme treatments. The initial increased activity likely counteracted the effects of the drop in low-motility, surficial fauna densities, resulting in a steady rather than sudden fall in oxygen consumption. We conclude that the functional identity in terms of motility and sediment reworking can be crucial in our understanding of the

  10. Functional trait responses to sediment deposition reduce macrofauna-mediated ecosystem functioning in an estuarine mudflat

    Directory of Open Access Journals (Sweden)

    S. Mestdagh

    2018-05-01

    Full Text Available Human activities, among which dredging and land use change in river basins, are altering estuarine ecosystems. These activities may result in changes in sedimentary processes, affecting biodiversity of sediment macrofauna. As macrofauna controls sediment chemistry and fluxes of energy and matter between water column and sediment, changes in the structure of macrobenthic communities could affect the functioning of an entire ecosystem. We assessed the impact of sediment deposition on intertidal macrobenthic communities and on rates of an important ecosystem function, i.e. sediment community oxygen consumption (SCOC. An experiment was performed with undisturbed sediment samples from the Scheldt river estuary (SW Netherlands. The samples were subjected to four sedimentation regimes: one control and three with a deposited sediment layer of 1, 2 or 5 cm. Oxygen consumption was measured during incubation at ambient temperature. Luminophores applied at the surface, and a seawater–bromide mixture, served as tracers for bioturbation and bio-irrigation, respectively. After incubation, the macrofauna was extracted, identified, and counted and then classified into functional groups based on motility and sediment reworking capacity. Total macrofaunal densities dropped already under the thinnest deposits. The most affected fauna were surficial and low-motility animals, occurring at high densities in the control. Their mortality resulted in a drop in SCOC, which decreased steadily with increasing deposit thickness, while bio-irrigation and bioturbation activity showed increases in the lower sediment deposition regimes but decreases in the more extreme treatments. The initial increased activity likely counteracted the effects of the drop in low-motility, surficial fauna densities, resulting in a steady rather than sudden fall in oxygen consumption. We conclude that the functional identity in terms of motility and sediment reworking can be crucial in our

  11. Uranium hydrogeochemical and stream sediment reconnaissance data from the area of the Noatak and portions of the Baird Mountains and Ambler River Quadrangles, Alaska

    International Nuclear Information System (INIS)

    Aamodt, P.L.; Hill, D.E.; Sharp, R.R. Jr.

    1978-05-01

    During August 1976, a total of 876 natural waters and 861 bottom sediments were collected at a nominal density of one location each 23 km 2 from streams and small lakes throughout the Noatak NTMS quadrangle, the southern two-thirds of the Baird Mountains NTMS quadrangle, and in the southwest corner of the Ambler River NTMS quadrangle. These samples were collected as part of the National Uranium Resource Evaluation program in Alaska being conducted by the Los Alamos Scientific Laboratory (LASL). The field collection and treatment of the samples were performed following strict LASL specifications. Total uranium was measured in the waters by fluorometry and in the sediments by delayed-neutron counting, using stringent quality assurance controls at the LASL. The uranium contents of the waters ranged from below the detection limit of 0.02 parts per billion (ppB) to a high of 8.38 ppB, and the uranium contents of the sediments ranged from a low of 0.3 parts per million (ppM) to a high of 34.0 ppM. In general, the locations of waters containing relatively high uranium contents were found to occur in clusters, and particularly in the headwaters of streams draining the southern slopes of the Baird Mountains. Few sediments contained relatively high uranium contents. These usually occurred singly at isolated locations scattered throughout the area. No obvious association exists between the location of high-uranium waters and sediments anywhere in the study area. The geology, mineralogy, and hydrology of this area is only generally described in the literature; therefore, it is difficult to correlate these data with particular aspects of the physical environment where individual samples were collected. However, the data do indicate that certain areas underlaid by Paleozoic sedimentary rocks and granitic intrusives within the Baird Mountains and a quartz-pebble conglomerate in the Waring Mountains may warrant more detailed field investigations

  12. Floodplain sediment from a 100-year-recurrence flood in 2005 of the Ping River in northern Thailand

    Science.gov (United States)

    Wood, S. H.; Ziegler, A. D.

    2008-07-01

    The tropical storm, floodwater, and the floodplain-sediment layer of a 100-year recurrence flood are examined to better understand characteristics of large monsoon floods on medium-sized rivers in northern Thailand. Storms producing large floods in northern Thailand occur early or late in the summer rainy season (May October). These storms are associated with tropical depressions evolving from typhoons in the South China Sea that travel westward across the Indochina Peninsula. In late September, 2005, the tropical depression from Typhoon Damrey swept across northern Thailand delivering 100 200 mm/day at stations in mountainous areas. Peak flow from the 6355-km2 drainage area of the Ping River upstream of the city of Chiang Mai was 867 m3s-1 (river-gage of height 4.93 m) and flow greater than 600 m3s-1 lasted for 2.5 days. Parts of the city of Chiang Mai and some parts of the floodplain in the intermontane Chiang Mai basin were flooded up to 1-km distant from the main channel. Suspended-sediment concentrations in the floodwater were measured and estimated to be 1000 1300 mg l-1. The mass of dry sediment (32.4 kg m-2), measured over a 0.32-km2 area of the floodplain is relatively high compared to reports from European and North American river floods. Average wet sediment thickness over the area was 3.3 cm. Sediment thicker than 8 cm covered 16 per cent of the area, and sediment thicker than 4 cm covered 44 per cent of the area. High suspended-sediment concentration in the floodwater, flow to the floodplain through a gap in the levee afforded by the mouth of a tributary stream as well as flow over levees, and floodwater depths of 1.2 m explain the relatively large amount of sediment in the measured area. Grain-size analyses and examination of the flood layer showed about 15-cm thickness of massive fine-sandy silt on the levee within 15-m of the main channel, sediment thicker than 6 cm within 200 m of the main channel containing a basal coarse silt, and massive clayey

  13. The effect of lake sediment on the hatching success of Daphnia ephippial eggs

    Directory of Open Access Journals (Sweden)

    Jacek Radzikowski

    2016-07-01

    Full Text Available A large proportion of lake-Daphnia ephippia which are shed by females in the water column sink to the bottom, where they form an assemblage of dormant stages known as an egg bank. Although the quantity of zooplankton eggs in such assemblages may exceed tens of thousands per square meter, the annual hatch from this bank is usually extremely low (from zero to a few dozens animals per square meter per year. This low-hatching phenomenon may be caused by isolation from hatching stimuli by water or sediment layers, a mechanical barrier formed by sediment that does not allow hatchlings to reach the water, or by a bet-hedging strategy of the resting eggs. The aim of our study was to determine the extent to which coverage by lake sediment may affect the hatching of Daphnia dormant eggs. The ephippia of lake-Daphnia (longispina species complex, covered by sterilized lake sediment of different thicknesses (0, 0.25, 0.5, 1, 2 and 4 cm; 4 replicates per treatment, were incubated for 8 weeks in lab controlled conditions. The results indicate that even the thinnest tested layer (0.25 cm may completely inhibit hatching of ephippial eggs. A few Daphnia neonates were observed in two (of five sediment treatments, while dozens of animals hatched in the control one. In the second experiment we determined that the sediment sterilization process did not affect the hatching proportion of ephippial eggs (when compared to the treatment with unsterilized sediments. We hypothesize that the observed inhibition of Daphnia hatching in the main experiment, which may cause a serious problem for Cladoceran populations in lakes where no sediment mixing occurs, may be caused by low light intensity, anoxic conditions or a physical barrier created by the sediment.

  14. The Peru Margin as an Authigenic Mineral Factory, Evidence From Surface Sediments and Oceanography

    Science.gov (United States)

    Dean, W. E.; Arthur, M. A.

    2004-12-01

    Characteristics of sediments deposited within an intense oxygen-minimum zone (OMZ) on the Peru continental margin were mapped by submersible, and studied in samples collected in deck-deployed box cores and submersible push cores on two east-west transects over water depths of 75 to 1000 m at 12 degrees and 13.5 degrees S. On the basis of sampling of the top 1-2 cm of available cores, three main belts of sediments were identified in each transect with increasing depth: 1) organic-carbon (OC)-rich muds; 2) authigenic phosphatic mineral crusts; and 3) glaucony facies. These facies patterns are primarily controlled by redox conditions and strength of bottom currents. OC-rich sediments on the 12-degree transect were mainly located on the outer shelf and upper slope (150-350 m), but they occurred in much shallower water (ca. 100 m) on the 13.5-degree transect. The organic matter is almost entirely marine, resulting from very high primary productivity. The OC concentrations are highest (up to 18%) in sediments where intermediate water masses with low dissolved oxygen concentrations (less than 5 micromoles/kg) impinge on the slope at water depths between 75 and 450 m. The region between 175 and 350 m depth is characterized by bedforms stabilized by bacterial mats, extensive authigenic mineral crusts, and (or) thick organic flocs. Currents as high as 30 cm/sec were measured over that depth interval. Current-resuspension of surficial organic matter, activity of organisms, and transport to and from more oxygenated zones contribute to greater oxidation and poorer preservation of organic matter than occur under oxygen-deficient conditions. Phosphate-rich sediments occurred at depths of about 300 to 550 m on both transects. Nodular crusts cemented by carbonate-fluorapatite (CFA; phosphorite) or dolomite form within the OMZ. The crusts start by cementation of sediment near the sediment-water interface forming stiff but friable phosphatizes claystone "protocrusts". The protocrusts

  15. North-Western Caspian:New data of structural setting

    International Nuclear Information System (INIS)

    Gorshkov, A.S; Pilipenko, A.I; Zakharov, N.V; Shumskiy, B.V

    2002-01-01

    Full text: In 1999 and 2000 SSC Yuzhmorgeologiya shot 600 km of 2D multichannel seismic in the shallow-telemetric system, produced by Fairfield industries Company, USA.Explored area covers three tectonic units of the Western Precaspian: the Karpinsky Ridge, the Manych Trough and the Prekuma-Tyuleniy Uplift Zone.On the Karpinsky Ridge, the geologic section was studied to 2,5-4 km depth.The deepest reflector is related to the eroded surface of Paleozoic strata (Pre-Jurassic unconformity).The Cenozoic sediments were divided into three seismostratigraphic sequences: Apsheronian, Akchagylian and Maykopian.The Apsheronian sequences occurs as a 450-700 m thick flat cover with parallel continuous reflectors.The Akchagylian sequence, similar with the adjacent onshore, contains progradational clinoforms.Maykopian strata are more than 1500 m thick in the southern part of the area; northward they are thinning to zero values, mostly as a result of pre-Akchagylian erosional truncation.A package of high amplitude parallel events, recorded beneath the Cenozoic sequences, corresponds to Eocene, Cretaceous and Jurassic strata.Some key reflectors, selected from the package and picked through the area, were dated as Top Eocene, Top Lower albian, Top Upper Jurassic and Pre-Jurassic unconformity.

  16. Recently Discovered Near-Shore Gascharged Sediments and Pockmarks, Northern Iceland

    Science.gov (United States)

    Richter, B.; Driscol, N.; Detrick, R. S.; Fornari, D.; Brandsdottir, B.

    2003-12-01

    The approx. 150 km long and 50 km wide Tjornes Fracture Zone (TFZ), formed in response to the eastward jump of the spreading axis in N-Iceland that began in late Miocene time (7-9 Ma). The fracture zone is made up of three N-S trending extensional half graben, Eyjafjordur, Skjalfandi and Oxarfjordur, and bordered to the south by a WNW-trending transtensional fault, the Husavik-Flatey fault (HFF). A 0.5-4 km thick sedimentary sequence has accumulated within the TFZ graben. Near-shore marine sediments are exposed on the Tjornes peninsula, at the eastern margin of the Skjalfandi graben, where approx. 500 m thick Miocene-Pliocene sediments contain several lignite layers. Natural gas emitting from geothermal areas at the shore of Oxarfjordur contain high concentrations of evolved hydrocarbons. The gas probably originates from marine sediments and lignites similar to those observed on the Tjornes peninsula. In 2001, a sidescan sonar imaging and CHIRP subbottom profiling were conducted along the HFF, within Skjalfandi Bay. CHIRP data show amplitude anomalies and acoustic wipe-out zones, indicative of gas accumulation within the sediments. In addition, the sidescan data reveal a number of shallow, circular and elongated depressions up to 30 m in diameter along the northern edge of the HFF. Areas of large, elongated and circular depressions (pockmarks) within Skjalfandi Bay were mapped during a multibeam bathymetric survey in 2002. A second Chirp subbottom and sidescan-sonar survey was conducted this summer along with gravity coring and digital bottom photography in order to assess the origin of these pockmarks and define the distribution of the gas charged sediments. Where present, acoustic wipe-out zones associated with the gas obscured all underlying reflectors as shallow as 5 meters below the ocean floor, in areas as large as 2 square km. The gas charged sediments are more widespread than previously observed within the bay. In northern Skjalfandi the gas seems connected

  17. Cyclic Cratonic Carbonates and Phanerozoic Calcite Seas.

    Science.gov (United States)

    Wilkinson, Bruce H.

    1982-01-01

    Discusses causes of cyclicity in cratonic carbonate sequences and evidence for and potential significance of postulated primary calcite sediment components in past Paleozoic seas, outlining problems, focusing on models explaining existing data, and identifying background. Future sedimentary geologists will need to address these and related areas…

  18. Sedimentary facies of the upper Cambrian (Furongian; Jiangshanian and Sunwaptan) Tunnel City Group, Upper Mississippi Valley: new insight on the old stormy debate

    Science.gov (United States)

    Eoff, Jennifer D.

    2014-01-01

    New data from detailed measured sections permit a comprehensive revision of the sedimentary facies of the Furongian (upper Cambrian; Jiangshanian and Sunwaptan stages) Tunnel City Group (Lone Rock Formation and Mazomanie Formation) of Wisconsin and Minnesota. Heterogeneous sandstones, comprising seven lithofacies along a depositional transect from shoreface to transitional-offshore environments, record sedimentation in a storm-dominated, shallow-marine epicontinental sea. The origin of glauconite in the Birkmose Member and Reno Member of the Lone Rock Formation was unclear, but its formation and preserved distribution are linked to inferred depositional energy rather than just net sedimentation rate. Flat-pebble conglomerate, abundant in lower Paleozoic strata, was associated with the formation of a condensed section during cratonic flooding. Hummocky cross-stratification was a valuable tool used to infer depositional settings and relative paleobathymetry, and the model describing formation of this bedform is expanded to address flow types dominant during its genesis, in particular the importance of an early unidirectional component of combined flow. The depositional model developed here for the Lone Rock Formation and Mazomanie Formation is broadly applicable to other strata common to the early Paleozoic that document sedimentation along flooded cratonic interiors or shallow shelves.

  19. Neotectonic Activity from Karewa Sediments, Kashmir Himalaya, India

    Science.gov (United States)

    Agarwal, K. K.; Shah, R. A.; Achyuthan, H.; Singh, D. S.; Srivastava, S.; Khan, I.

    2018-01-01

    Intermontane basin sedimentation occurred during Pliocene-Pleistocene in the Karewa Basin which formed after the continent-continent collision resulting in the formation of Himalayan orogenic belt around Eocene. These are elongated, narrow, thrust bounded basins which have formed during the late stages of orogeny. Situated at a height of 1700-1800 m above sea level, the Karewa basin received sediments because of ponding of a pre-existing river system and the tectonic movements along the Great Himalayan Ranges in the north and the Pir-Panjal ranges in the south along active faults. About 1300 m thick sediments of largely fluvio-lacustrine, glacio-fluvio-lacustrine and eolian origin are exposed having evidences of neotectonically formed structural features such as folds and faults. Folds are more prominent in the Lower Karewa formation (Hirpur Formation) while faults (mostly normal faults) are abundant in the Upper Karewas (Nagum Formation). Drainage in the area varies from dendritic to anastomosing to parallel. Anastomosing drainage suggests sudden decrease in gradient while presence of linear features such as faults and ridges is evident by parallel drainage. Study of morphometric parameters such as stream length (Lsm) and stream length ratios (RL), bifurcation ratio (Rb), drainage density (D), form factor (Rf), circularity ratio (Rc), and elongation ratio (Re) also indicate intense tectonic activity in the recent past.

  20. Suspended sediment and sediment-associated contaminants in San Francisco Bay

    Science.gov (United States)

    Schoellhamer, D.H.; Mumley, T.E.; Leatherbarrow, J.E.

    2007-01-01

    Water-quality managers desire information on the temporal and spatial variability of contaminant concentrations and the magnitudes of watershed and bed-sediment loads in San Francisco Bay. To help provide this information, the Regional Monitoring Program for Trace Substances in the San Francisco Estuary (RMP) takes advantage of the association of many contaminants with sediment particles by continuously measuring suspended-sediment concentration (SSC), which is an accurate, less costly, and more easily measured surrogate for several trace metals and organic contaminants. Continuous time series of SSC are collected at several sites in the Bay. Although semidiurnal and diurnal tidal fluctuations are present, most of the variability of SSC occurs at fortnightly, monthly, and semiannual tidal time scales. A seasonal cycle of sediment inflow, wind-wave resuspension, and winnowing of fine sediment also is observed. SSC and, thus, sediment-associated contaminants tend to be greater in shallower water, at the landward ends of the Bay, and in several localized estuarine turbidity maxima. Although understanding of sediment transport has improved in the first 10 years of the RMP, determining a simple mass budget of sediment or associated contaminants is confounded by uncertainties regarding sediment flux at boundaries, change in bed-sediment storage, and appropriate modeling techniques. Nevertheless, management of sediment-associated contaminants has improved greatly. Better understanding of sediment and sediment-associated contaminants in the Bay is of great interest to evaluate the value of control actions taken and the need for additional controls. ?? 2007 Elsevier Inc. All rights reserved.

  1. The contribution of bank and surface sediments to fluvial sediment ...

    African Journals Online (AJOL)

    The contribution of bank and surface sediments to fluvial sediment transport of the Pra River. ... the relative contribution of surface and bank sediments to the fluvial sediment transport. ... EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

  2. Barents Sea Paleozoic basement and basin configurations: Crustal structure from deep seismic and potential field data

    Science.gov (United States)

    Aarseth, Iselin; Mjelde, Rolf; Breivik, Asbjørn Johan; Huismans, Ritske; Faleide, Jan Inge

    2016-04-01

    The Barents Sea is underlain by at least two different basement domains; the Caledonian in the west and the Timanian in the east. The transition between these two domains is not well constrained and contrasting interpretations have been published recently. Interpretations of new high-quality magnetic data covering most of the SW Barents Sea has challenged the Late Paleozoic basin configurations in the western and central Barents Sea as outlined in previous studies. Two regional ocean bottom seismic (OBS) profiles were acquired in 2014. This new dataset crosses the two major directions of Caledonian deformation proposed by different authors: N-S direction and SW-NE direction. Of particular importance are the high velocity anomalies related to Caledonian eclogites, revealing the location of Caledonian suture zones in the northern Barents Sea. One of the main objectives with this project is to locate the main Caledonian suture in the western Barents Sea, as well as the possible Barentsia-Baltica suture postulated further eastwards. The collapse of the Caledonian mountain range predominantly along these suture zones is expected to be tightly linked to the deposition of large thicknesses of Devonian erosional products, and later rifting is expected to be influenced by inheritance of Caledonian trends. The P-wave travel-time modelling is done by use of a combined ray-tracing and inversion scheme, and gravity- and magnetic modelling will be used to augment the seismic model. The preliminary results indicate high P-wave velocities (mostly over 4 km/s) close to the seafloor as well as high velocity (around 6 km/s) zones at shallow depths which are interpreted as volcanic sills. The crustal transects reveal areas of complex geology and velocity inversions. A low seismic impedance contrast between the sedimentary section and top crystalline basement makes identification of this interface uncertain. Depth to Moho mostly lies around 30 km, except in an area of rapid change in

  3. A preliminary assessment of geologic framework and sediment thickness studies relevant to prospective US submission on extended continental shelf

    Science.gov (United States)

    Hutchinson, Deborah R.; Childs, Jonathan R.; Hammar-Klose, Erika; Dadisman, Shawn; Edgar, N. Terrence; Barth, Ginger A.

    2004-01-01

    Under the provisions of Articles 76 and 77 of the United Nations Convention on the Law of the Sea (UNCLOS), coastal States have sovereign rights over the continental shelf territory beyond 200-nautical mile (nm) from the baseline from which the territorial sea is measured if certain conditions are met regarding the geologic and physiographic character of the legal continental shelf as defined in those articles. These claims to an extended continental shelf must be supported by relevant bathymetric, geophysical and geological data according to guidelines established by the Commission on the Limits of the Continental Shelf (CLCS, 1999). In anticipation of the United States becoming party to UNCLOS, Congress in 2001 directed the Joint Hydrographic Center/Center for Coastal and Ocean Mapping at the University of New Hampshire to conduct a study to evaluate data relevant to establishing the outer limit of the juridical continental shelf beyond 200 nm and to recommend what additional data might be needed to substantiate such an outer limit (Mayer and others, 2002). The resulting report produced an impressive and sophisticated GIS database of data sources. Because of the short time allowed to complete the report, all seismic reflection data were classified together; the authors therefore recommended that USGS perform additional analysis on seismic and related data holdings. The results of this additional analysis are the substance of this report, including the status of geologic framework, sediment isopach research, and resource potential in the eight regions1 identified by Mayer and others (2002) where analysis of seismic data might be crucial for establishing an outer limit . Seismic reflection and refraction data are essential in determining sediment thickness, one of the criteria used in establishing the outer limits of the juridical continental shelf. Accordingly, the initial task has been to inventory public-domain seismic data sources, primarily those regionally

  4. Aerial gamma ray and magnetic survey: Mississippi and Florida airborne survey, Nashville quadrangle, Tennessee, and Kentucky. Final report

    International Nuclear Information System (INIS)

    1980-09-01

    The Nashville quadrangle covers a portion of the interior lowland plateau region of the Midwestern Physiographic Province. The quadrangle contains a shallow to moderately thick Paleozoic section that overlies a Precambrian basement complex. Paleozoic carbonates dominate surficial exposures. A search of available literature revealed no known uranium deposits. Fifty-five uranium anomalies were detected and are discussed briefly. Most anomalies appear to relate to cultural features. Some have relatively high uranium concentration levels that may be significant despite their correlation with culture. Magnetic data appear to illustrate complexities in the Precambrian basement

  5. Holocene and Late Glacial sedimentation near steep slopes in southern Lake Baikal

    Directory of Open Access Journals (Sweden)

    Michael Sturm

    2015-07-01

    Full Text Available We here present new data on sedimentation at and near the steep north-slopes of southern Lake Baikal. Short sediment cores were taken at 550 m and at 1366 m water depth, within 3600 m offshore Cape Ivanovskii at the station of the Baikal Deep Underwater NEUTRINO Telescope. The sediments within 3600 m off the northern coast of Southern Lake Baikal are dominated by pelagic deposition. Our data reveal surprisingly little influence from terrigenous material from adjacent coastal areas, tributaries and their catchment. At the shallow-water site (at 550 m water depth, 700 m off shore just 27 cm thick homogenous sediments have accumulated during the Holocene on top of Pleistocene deposits resulting in Holocene sedimentation rates of 0.003 cm a-1. The very low rates are caused by long-term persistent winnowing of fine particles caused by week contour currents along the slope. The uppermost sediments are oxidized down to 22 cm. Very low concentrations of Corg, Sibio and Ntot in Pleistocene sediments increase dramatically within the Holocene. The heavy mineral fraction of the shallow-water sediments contains up to 33.6 % olivine and up to 2.4 % spinel. These rare minerals originate from white marbles of the nearby coastal outcrop Belaya Vyemka of the Early Precambrian Sharyzalgaiskaya Series. At the deep-water site (at 1366 m water depth, 3600 m off shore Holocene sedimentation rates are 10-times higher (0.036 cm a-1. Sediment oxidation occurs just within the uppermost 2 cm. Of the two rare type minerals of the Sharyzalgaiskaya Series spinel does not occur at all and olivine is represented by very diminished concentrations. This indicates insignificant influx of terrestrial material from the nearby shore to the deep-water site . Distal turbidites of far-off sources are intercalated to pelagic sediments at the deep-water site. Breakdown events of deltas at the SE- and S-coast of the basin are suggested to be responsible for the formation of the turbidites

  6. Textural parameters distribution in sediments surface of the Uruguay river background between km 221 and 254

    International Nuclear Information System (INIS)

    Capeluto, W.; Campos, T. de los

    2010-01-01

    The aim of this paper is to analyze the distribution of textural statistical parameters and spatial variation in the morphology of the sediment areas. The geology of the area comprises alluvial and alluvial deposits of variable thicknesses overlying deposits of Fray Bent os, Salto and Guichon formations that occasionally emerge in the river bed

  7. Lead Thickness Measurements

    International Nuclear Information System (INIS)

    Rucinski, R.

    1998-01-01

    The preshower lead thickness applied to the outside of D-Zero's superconducting solenoid vacuum shell was measured at the time of application. This engineering documents those thickness measurements. The lead was ordered in sheets 0.09375-inch and 0.0625-inch thick. The tolerance on thickness was specified to be +/- 0.003-inch. The sheets all were within that thickness tolerance. The nomenclature for each sheet was designated 1T, 1B, 2T, 2B where the numeral designates it's location in the wrap and 'T' or 'B' is short for 'top' or 'bottom' half of the solenoid. Micrometer measurements were taken at six locations around the perimeter of each sheet. The width,length, and weight of each piece was then measured. Using an assumed pure lead density of 0.40974 lb/in 3 , an average sheet thickness was calculated and compared to the perimeter thickness measurements. In every case, the calculated average thickness was a few mils thinner than the perimeter measurements. The ratio was constant, 0.98. This discrepancy is likely due to the assumed pure lead density. It is not felt that the perimeter is thicker than the center regions. The data suggests that the physical thickness of the sheets is uniform to +/- 0.0015-inch.

  8. Assessment of Appalachian basin oil and gas resources: Utica-Lower Paleozoic Total Petroleum System: Chapter G.10 in Coal and petroleum resources in the Appalachian basin: distribution, geologic framework, and geochemical character

    Science.gov (United States)

    Ryder, Robert T.; Ruppert, Leslie F.; Ryder, Robert T.

    2014-01-01

    The Utica-Lower Paleozoic Total Petroleum System (TPS) in the Appalachian Basin Province is named for the Upper Ordovician Utica Shale, which is the source rock, and for multiple lower Paleozoic sandstone and carbonate units that are the important reservoirs. The total organic carbon (TOC) values for the Utica Shale are usually greater than 1 weight percent. TOC values ranging from 2 to 3 weight percent outline a broad, northeast-trending area that extends across western and southern Pennsylvania, eastern Ohio, northern West Virginia, and southeastern New York. The Utica Shale is characterized by type II kerogen, which is a variety of kerogen that is typically prone to oil generation. Conondont color-alteration index (CAI) isograds, which are based on samples from the Upper Ordovician Trenton Limestone (or Group), indicate that a pod of mature Utica Shale source rocks occupies most of the TPS.

  9. Iso-Naakkima, a circular structure filled with Neoproterozoic sediments, Pieksämäki, southeastern Finland

    Directory of Open Access Journals (Sweden)

    Elo, S.

    1993-06-01

    Full Text Available A circular Bouguer gravity anomaly with a minimum of -4.0 mGal and halfamplitude width of 2 km was recognized at Lake Iso-Naakkima (62°11'N, 27°09'E, southeastern Finland. The gravity low is associated with subdued aeromagnetic signature and notable airborne and ground electromagnetic anomalies that indicate low bedrock resistivity. The drilling record beneath the recent (Quaternary glacial sediments, 25-40 m thick, reveals a 100 m thick sequence of unmetamorphosed shale, siltstone, quartz sandstone, kaolinitic clay and conglomeratic sandstone that rest on a weathered mica gneiss basement. The upward fining sequence is characterized by red colour, high kaolinite content, and tilted, distorted and brecciated beds. According to the geophysical modelling the diameter of the whole basin is 3 km and that of the sedimentary rocks 2 km, and the depth is 160 m. Shock lamellas in quartz clasts of the basal conglomeratic sandstone, almost omnipresent kink banding in micas of the rocks beneath the basin floor and the occurrence of polymictic dike breccia in the underlying mica gneiss suggest shock metamorphism. It was concluded that the basin originated by a meteorite impact. However, the impact-generated rocks were subsequently eroded before the sedimentation and only minor marks of shock metamorphism were preserved. Lateritic weathering took place prior to deposition of the sediments. Quartz sandstone and siltstone are interpreted as fluvial deposits and the thinly laminated shales as transgressi ve lacustrine or lagoonal deposits. The microfossil assemblage in the shale includes sphaeromorphs of acritarchs from Late Riphean (Neoproterozoic. Postdepositional subsidence of the Iso-Naakkima basin, shown by tilted sediments, preserved the sequence from further erosion.

  10. A- and I-type metagranites from the North Shahrekord Metamorphic Complex, Iran: Evidence for Early Paleozoic post-collisional magmatism

    Science.gov (United States)

    Badr, Afsaneh; Davoudian, Ali Reza; Shabanian, Nahid; Azizi, Hossein; Asahara, Yoshihiro; Neubauer, Franz; Dong, Yunpeng; Yamamoto, Koshi

    2018-02-01

    The North Shahrekord Metamorphic Complex (NSMC) of the central Sanandaj-Sirjan Zone (SaSZ) consists of metagranitoid bodies, which were metamorphosed within high pressure-low temperature conditions. Whole rock chemistry shows relatively high amounts of SiO2 (65-77 wt%) and Al2O3 (12-15 wt%), low amounts of Nb, P, Sr, Ti, a high ratio of Ga/Al (4-9) and a negative Eu anomaly. The chemical compositions of metagranites are reasonably similar to A- and I-type granites. U-Pb zircon ages of three samples of metagranites indicate that crystallization of the granites occurred at 521.6 ± 9.1 to 513.5 ± 8.5 Ma, Middle Cambrian. The initial 87Sr/86Sr and 143Nd/144Nd ratios of samples vary from 0.7057-0.7239 and 0.511801-0.511890, respectively. High initial 87Sr/86Sr ratios and low εNd(t) values (- 3.39 to - 1.07) associated with high ratios of 206Pb/204Pb(t) = 17.8557-18.8045, 207Pb/204Pb(t) = 15.6721-15.7220, and 208Pb/204Pb(t) = 37.7490-38.4468 infer a significant contribution of continental crust in generating the source magma of the metagranite bodies. The results reveal that the metagranites were mainly produced through mixing of basaltic melts with components similar to metasedimentary sources. The new results show that crystallization of the metagranites occurred in Early Paleozoic times and much earlier than break-up and drifting of the SaSZ from the Arabian plate, suggesting that the metagranites were mainly produced in the western Iran after the closure of the Proto-Tethys Ocean. This model is consistent with the previously suggested models for formation of an Early Paleozoic granitoid belt along the northern rim of Gondwana.

  11. Devonian post-orogenic extension-related volcano-sedimentary rocks in the northern margin of the Tibetan Plateau, NW China: Implications for the Paleozoic tectonic transition in the North Qaidam Orogen

    Science.gov (United States)

    Qin, Yu; Feng, Qiao; Chen, Gang; Chen, Yan; Zou, Kaizhen; Liu, Qian; Jiao, Qianqian; Zhou, Dingwu; Pan, Lihui; Gao, Jindong

    2018-05-01

    The Maoniushan Formation in the northern part of the North Qaidam Orogen (NQO), NW China, contains key information on a Paleozoic change in tectonic setting of the NQO from compression to extension. Here, new zircon U-Pb, petrological, and sedimentological data for the lower molasse sequence of the Maoniushan Formation are used to constrain the timing of this tectonic transition. Detrital zircons yield U-Pb ages of 3.3-0.4 Ga with major populations at 0.53-0.4, 1.0-0.56, 2.5-1.0, and 3.3-2.5 Ga. The maximum depositional age of the Maoniushan Formation is well constrained by a youngest detrital zircon age of ∼409 Ma. Comparing these dates with geochronological data for the region indicates that Proterozoic-Paleozoic zircons were derived mainly from the NQO as well as the Oulongbuluk and Qaidam blocks, whereas Archean zircons were probably derived from the Oulongbuluk Block and the Tarim Craton. The ∼924, ∼463, and ∼439 Ma tectonothermal events recorded in this region indicate that the NQO was involved in the early Neoproterozoic assembly of Rodinia and early Paleozoic microcontinental convergence. A regional angular unconformity between Devonian and pre-Devonian strata within the NQO suggests a period of strong mountain building between the Oulongbuluk and Qaidam blocks during the Silurian, whereas an Early Devonian post-orogenic molasse, evidence of extensional collapse, and Middle to Late Devonian bimodal volcanic rocks and Carboniferous marine carbonate rocks clearly reflect long-lived tectonic extension. Based on these results and the regional geology, we suggest that the Devonian volcano-sedimentary rocks within the NQO were formed in a post-orogenic extensional setting similar to that of the East Kunlun Orogen, indicating that a major tectonic transition from compression to extension in these two orogens probably commenced in the Early Devonian.

  12. Influence of sediment recycling on the trace element composition of primitive arc lavas

    Science.gov (United States)

    Collinet, M.; Jagoutz, O. E.

    2017-12-01

    Primitive calc-alkaline lavas from continental arcs are, on average, enriched in incompatible elements compared to those from intra-oceanic arcs. This relative enrichment is observed in different groups of trace elements: LILE (e.g. K, Rb), LREE to MREE (La-Dy) and HFSE (e.g.Zr, Nb) and is thought to result from (1) a transfer of material from the subducting slab to the mantle wedge at higher temperature than in intra-oceanic margins and/or (2) lower average degrees of melting in the mantle wedge, as a consequence of thicker overlying crusts and higher average pressures of melting. In addition to thicker overlying crusts and generally higher slab temperatures, continental margins are characterized by larger volumes of rock exposed above sea level and enhanced erosion rates compared to intra-oceanic arcs. As several geochemical signatures of arc lavas attest to the importance of sediment recycling in subduction zones, we explore the possibility that the high concentrations of incompatible elements in primitive lavas from continental arcs directly reflect a larger input of sediment to the subduction system. Previous efforts to quantify the sediment flux to oceanic trenches focused on the thickness of pelagic and hemipelagic sediments on top of the plate entering the subduction zone (Plank and Langmuir, 1993, Nature). These estimates primarily relied on the sediment layer drilled outboard from the subduction system and likely underestimate the volume of sediment derived from the arc itself. Accordingly, we find that such estimates of sediment flux do not correlate with the concentration of incompatible elements in primitive arc lavas. To account for regional contributions of coarser detrital sediments, usually delivered to oceanic trenches by turbidity currents, we apply to arc segments a model that quantifies the sediment load of rivers based on the average relief, area, temperature and runoff of their respective drainage areas (Syvitski et al., 2003, Sediment. Geol

  13. Shifts among Eukaryota, Bacteria, and Archaea define the vertical organization of a lake sediment.

    Science.gov (United States)

    Wurzbacher, Christian; Fuchs, Andrea; Attermeyer, Katrin; Frindte, Katharina; Grossart, Hans-Peter; Hupfer, Michael; Casper, Peter; Monaghan, Michael T

    2017-04-08

    Lake sediments harbor diverse microbial communities that cycle carbon and nutrients while being constantly colonized and potentially buried by organic matter sinking from the water column. The interaction of activity and burial remained largely unexplored in aquatic sediments. We aimed to relate taxonomic composition to sediment biogeochemical parameters, test whether community turnover with depth resulted from taxonomic replacement or from richness effects, and to provide a basic model for the vertical community structure in sediments. We analyzed four replicate sediment cores taken from 30-m depth in oligo-mesotrophic Lake Stechlin in northern Germany. Each 30-cm core spanned ca. 170 years of sediment accumulation according to 137 Cs dating and was sectioned into layers 1-4 cm thick. We examined a full suite of biogeochemical parameters and used DNA metabarcoding to examine community composition of microbial Archaea, Bacteria, and Eukaryota. Community β-diversity indicated nearly complete turnover within the uppermost 30 cm. We observed a pronounced shift from Eukaryota- and Bacteria-dominated upper layers (14 cm) dominated by enigmatic Archaea that typically occur in deep-sea sediments. Taxonomic replacement was the prevalent mechanism in structuring the community composition and was linked to parameters indicative of microbial activity (e.g., CO 2 and CH 4 concentration, bacterial protein production). Richness loss played a lesser role but was linked to conservative parameters (e.g., C, N, P) indicative of past conditions. By including all three domains, we were able to directly link the exponential decay of eukaryotes with the active sediment microbial community. The dominance of Archaea in deeper layers confirms earlier findings from marine systems and establishes freshwater sediments as a potential low-energy environment, similar to deep sea sediments. We propose a general model of sediment structure and function based on microbial characteristics and

  14. Non-Fluvial Controls of Erosion, Sediment Transport and Fluvial Morphology in a mid-Atlantic Piedmont Watershed, White Clay Creek, Pennsylvania, U.S.A.

    Science.gov (United States)

    McCarthy, K.; Affinito, R. A.; Pizzuto, J. E.; Stotts, S.; Henry, T.; Krauthauser, M.; O'Neal, M. A.

    2017-12-01

    Quantifying contemporary sediment budgets is essential for restoration and ecosystem management of mid-Atlantic watersheds, but relevant processes and controls are poorly understood. In the 153 km2 White Clay Creek watershed in southeastern Pennsylvania, longitudinal profiles reflect migration of knickpoints though bedrock over Quaternary timescales. In bank exposures along stream valleys, saprolite, bedrock, and matrix-supported cobbly and bouldery diamicton (likely colluvial) commonly underlie finer-grained clay, silt, sand, and gravel deposits of valley floor depositional environments. Overbank sedimentation rates were quantified by measuring the thickness of sediment deposited over the roots of floodplain trees. The sampled trees range in age from 25-270 years with median sediment accumulation rates of approximately 2 mm/yr (range 0-10 mm/yr). Rates of bank retreat (measured from historical aerial imagery or root-exposure dendrochronology) vary from 6-36 cm/yr, with median rates of 10 cm/yr. While bank erosion rates are subject to a variety of controls, including channel curvature, the density of riparian trees, and freeze-thaw processes, the strongest influence appears to be the grain size and thickness of bouldery diamicton exposed along the toes of retreating banks. Cobbles and boulders supplied by eroding diamicton also mantle the bed of the channel, such that 33- 80% of the bed material remains immobile at bankfull stage. A conceptual model of fluvial processes and sediment budgets for these channels must account for the watershed's history of changing climate, tectonics, and land use, requiring mapping of bedrock, colluvium, former mill dam sediments, and other non-alluvial deposits and controls. Efforts to apply hydraulic geometry principles (requiring a precise adjustment to contemporary hydraulic and sediment regime) or to treat these channels as traditional "threshold" rivers are unlikely to be successful.

  15. Paleozoic unconformities favorable for uranium concentration in northern Appalachian basin

    International Nuclear Information System (INIS)

    Dennison, J.M.

    1986-01-01

    Unconformities can redistribute uranium from protore rock as ground water moves through poorly consolidated strata beneath the erosion surface, or later moves along the unconformity. Groundwater could migrate farther than in present-day lithified Paleozoic strata in the Appalachian basin, now locally deformed by the Taconic and Allegheny orogenies. Several paleoaquifer systems could have developed uranium geochemical cells. Sandstone mineralogy, occurrences of fluvial strata, and reduzate facies are important factors. Other possibilities include silcrete developed during desert exposure, and uranium concentrated in paleokarst. Thirteen unconformities are evaluated to determine favorable areas for uranium concentration. Cambrian Potsdam sandstone (New York) contains arkoses and possible silcretes just above crystalline basement. Unconformities involving beveled sandstones and possible fluvial strata include Cambrian Hardyston sandstone (New Jersey), Cambrian Potsdam Sandstone (New York), Ordovician Oswego and Juniata formations (Pennsylvania and New York), Silurian Medina Group (New York), and Silurian Vernon, High Falls, and Longwood formations (New York and New Jersey). Devonian Catskill Formation is beveled by Pennsylvanian strata (New York and Pennsylvania). The pre-Pennsylvanian unconformity also bevels Lower Mississippian Pocono, Knapp, and Waverly strata (Pennsylvania, New York, and Ohio), truncates Upper Mississippian Mauch Chunk Formation (Pennsylvania), and forms paleokarst on Mississippian Loyalhanna Limestone (Pennsylvania) and Maxville Limestone (Ohio). Strata associated with these unconformities contain several reports of uranium. Unconformities unfavorable for uranium concentration occur beneath the Middle Ordovician (New York), Middle Devonian (Ohio and New York), and Upper Devonian (Ohio and New York); these involve marine strata overlying marine strata and probably much submarine erosion

  16. Sediment supply versus local hydraulic controls on sediment transport and storage in a river with large sediment loads

    Science.gov (United States)

    Dean, David; Topping, David; Schmidt, John C.; Griffiths, Ronald; Sabol, Thomas

    2016-01-01

    The Rio Grande in the Big Bend region of Texas, USA, and Chihuahua and Coahuila, Mexico, undergoes rapid geomorphic changes as a result of its large sediment supply and variable hydrology; thus, it is a useful natural laboratory to investigate the relative importance of flow strength and sediment supply in controlling alluvial channel change. We analyzed a suite of sediment transport and geomorphic data to determine the cumulative influence of different flood types on changing channel form. In this study, physically based analyses suggest that channel change in the Rio Grande is controlled by both changes in flow strength and sediment supply over different spatial and temporal scales. Channel narrowing is primarily caused by substantial deposition of sediment supplied to the Rio Grande during tributary-sourced flash floods. Tributary floods have large suspended-sediment concentrations, occur for short durations, and attenuate rapidly downstream in the Rio Grande, depositing much of their sediment in downstream reaches. Long-duration floods on the mainstem have the capacity to enlarge the Rio Grande, and these floods, released from upstream dams, can either erode or deposit sediment in the Rio Grande depending upon the antecedent in-channel sediment supply and the magnitude and duration of the flood. Geomorphic and sediment transport analyses show that the locations and rates of sand erosion and deposition during long-duration floods are most strongly controlled by spatial changes in flow strength, largely through changes in channel slope. However, spatial differences in the in-channel sediment supply regulate sediment evacuation or accumulation over time in long reaches (greater than a kilometer).

  17. Models of bedrock surface and overburden thickness over Olkiluoto island and nearby sea area

    Energy Technology Data Exchange (ETDEWEB)

    Moenkkoenen, H. [WSP Finland Oy, Helsinki (Finland)

    2012-04-15

    In this report, a model of bedrock surface and a model of overburden thickness over the Olkiluoto Island and the nearby sea area are presented. Also in purpose to produce material for biosphere and radionuclide transport modelling, stratigraphy models of different sediment layers were created at two priority areas north and south of the Olkiluoto Island. The work concentrated on the collection and description of available data of bedrock surface and overburden thickness. Because the information on the bedrock surface and overburden is collected from different sources and is based on a number of types of data the quality and applicability of data sets varies. Consequently also the reliability in different parts of the models varies. Input data for the bedrock surface and overburden thickness models include 2928 single points and additional outcrops observations (611 polygons) in the modelled area. In addition, the input data include 173 seismic refraction lines (6534 points) and acousticseismic sounding lines (26655 points from which 13721 points are located in model area) in the Olkiluoto offshore area. The average elevation of bedrock surface in area is 2.1 metres above the sea level. The average thickness of overburden is 2.5 metres varying typically between 2 - 4 metres. Thickest overburden covers (approximately 16 metres) of terrestrial area are located at the western end of the Olkiluoto Island and in sea basin south of the island. (orig.)

  18. Models of bedrock surface and overburden thickness over Olkiluoto island and nearby sea area

    International Nuclear Information System (INIS)

    Moenkkoenen, H.

    2012-04-01

    In this report, a model of bedrock surface and a model of overburden thickness over the Olkiluoto Island and the nearby sea area are presented. Also in purpose to produce material for biosphere and radionuclide transport modelling, stratigraphy models of different sediment layers were created at two priority areas north and south of the Olkiluoto Island. The work concentrated on the collection and description of available data of bedrock surface and overburden thickness. Because the information on the bedrock surface and overburden is collected from different sources and is based on a number of types of data the quality and applicability of data sets varies. Consequently also the reliability in different parts of the models varies. Input data for the bedrock surface and overburden thickness models include 2928 single points and additional outcrops observations (611 polygons) in the modelled area. In addition, the input data include 173 seismic refraction lines (6534 points) and acousticseismic sounding lines (26655 points from which 13721 points are located in model area) in the Olkiluoto offshore area. The average elevation of bedrock surface in area is 2.1 metres above the sea level. The average thickness of overburden is 2.5 metres varying typically between 2 - 4 metres. Thickest overburden covers (approximately 16 metres) of terrestrial area are located at the western end of the Olkiluoto Island and in sea basin south of the island. (orig.)

  19. Recent and historic sediment dynamics along Difficult Run, a suburban Virginia Piedmont stream

    Science.gov (United States)

    Hupp, Cliff R.; Noe, Gregory B.; Schenk, Edward R.; Bentham, Adam J.

    2012-01-01

    Suspended sediment is one of the major concerns regarding the quality of water entering the Chesapeake Bay. Some of the highest suspended-sediment concentrations occur on Piedmont streams, including Difficult Run, a tributary of the Potomac River draining urban and suburban parts of northern Virginia. Accurate information on catchment level sediment budgets is rare and difficult to determine. Further, the sediment trapping portion of sediment budget represents an important ecosystem service that profoundly affects downstream water quality. Our objectives, with special reference to human alterations to the landscape, include the documentation and estimation of floodplain sediment trapping (present and historic) and bank erosion along an urbanized Piedmont stream, the construction of a preliminary sediment balance, and the estimation of legacy sediment and recent development impacts. We used white feldspar markers to measure floodplain sedimentation rates and steel pins to measure erosion rates on floodplains and banks, respectively. Additional data were collected for/from legacy sediment thickness and characteristics, mill pond impacts, stream gaging station records, topographic surveying, and sediment density, texture, and organic content. Data were analyzed using GIS and various statistical programs. Results are interpreted relative to stream equilibrium affected by both post-colonial bottomland sedimentation (legacy) and modern watershed hardening associated with urbanization. Six floodplain/channel sites, from high to low in the watershed, were selected for intensive study. Bank erosion ranges from 0 to 470 kg/m/y and floodplain sedimentation ranges from 18 to 1369 kg/m/y (m refers to meters of stream reach). Upstream reaches are net erosional, while downstream reaches have a distinctly net depositional flux providing a watershed sediment balance of 2184 kg/m/y trapped within the system. The amounts of both deposition and erosion are large and suggest

  20. Recent and historic sediment dynamics along Difficult Run, a suburban Virginia Piedmont stream

    Science.gov (United States)

    Hupp, Cliff R.; Noe, Gregory B.; Schenk, Edward R.; Benthem, Adam J.

    2013-01-01

    Suspended sediment is one of the major concerns regarding the quality of water entering the Chesapeake Bay. Some of the highest suspended-sediment concentrations occur on Piedmont streams, including Difficult Run, a tributary of the Potomac River draining urban and suburban parts of northern Virginia. Accurate information on catchment level sediment budgets is rare and difficult to determine. Further, the sediment trapping portion of sediment budget represents an important ecosystem service that profoundly affects downstream water quality. Our objectives, with special reference to human alterations to the landscape, include the documentation and estimation of floodplain sediment trapping (present and historic) and bank erosion along an urbanized Piedmont stream, the construction of a preliminary sediment balance, and the estimation of legacy sediment and recent development impacts. We used white feldspar markers to measure floodplain sedimentation rates and steel pins to measure erosion rates on floodplains and banks, respectively. Additional data were collected for/from legacy sediment thickness and characteristics, mill pond impacts, stream gaging station records, topographic surveying, and sediment density, texture, and organic content. Data were analyzed using GIS and various statistical programs. Results are interpreted relative to stream equilibrium affected by both post-colonial bottomland sedimentation (legacy) and modern watershed hardening associated with urbanization. Six floodplain/channel sites, from high to low in the watershed, were selected for intensive study. Bank erosion ranges from 0 to 470 kg/m/y and floodplain sedimentation ranges from 18 to 1369 kg/m/y (m refers to meters of stream reach). Upstream reaches are net erosional, while downstream reaches have a distinctly net depositional flux providing a watershed sediment balance of 2184 kg/m/y trapped within the system. The amounts of both deposition and erosion are large and suggest

  1. Geographic information system datasets of regolith-thickness data, regolith-thickness contours, raster-based regolith thickness, and aquifer-test and specific-capacity data for the Lost Creek Designated Ground Water Basin, Weld, Adams, and Arapahoe Counties, Colorado

    Science.gov (United States)

    Arnold, L. Rick

    2010-01-01

    These datasets were compiled in support of U.S. Geological Survey Scientific-Investigations Report 2010-5082-Hydrogeology and Steady-State Numerical Simulation of Groundwater Flow in the Lost Creek Designated Ground Water Basin, Weld, Adams, and Arapahoe Counties, Colorado. The datasets were developed by the U.S. Geological Survey in cooperation with the Lost Creek Ground Water Management District and the Colorado Geological Survey. The four datasets are described as follows and methods used to develop the datasets are further described in Scientific-Investigations Report 2010-5082: (1) ds507_regolith_data: This point dataset contains geologic information concerning regolith (unconsolidated sediment) thickness and top-of-bedrock altitude at selected well and test-hole locations in and near the Lost Creek Designated Ground Water Basin, Weld, Adams, and Arapahoe Counties, Colorado. Data were compiled from published reports, consultant reports, and from lithologic logs of wells and test holes on file with the U.S. Geological Survey Colorado Water Science Center and the Colorado Division of Water Resources. (2) ds507_regthick_contours: This dataset consists of contours showing generalized lines of equal regolith thickness overlying bedrock in the Lost Creek Designated Ground Water Basin, Weld, Adams, and Arapahoe Counties, Colorado. Regolith thickness was contoured manually on the basis of information provided in the dataset ds507_regolith_data. (3) ds507_regthick_grid: This dataset consists of raster-based generalized thickness of regolith overlying bedrock in the Lost Creek Designated Ground Water Basin, Weld, Adams, and Arapahoe Counties, Colorado. Regolith thickness in this dataset was derived from contours presented in the dataset ds507_regthick_contours. (4) ds507_welltest_data: This point dataset contains estimates of aquifer transmissivity and hydraulic conductivity at selected well locations in the Lost Creek Designated Ground Water Basin, Weld, Adams, and

  2. Petrophysics and hydrocarbon potential of Paleozoic rocks in Kuwait

    Science.gov (United States)

    Abdullah, Fowzia; Shaaban, Fouad; Khalaf, Fikry; Bahaman, Fatma; Akbar, Bibi; Al-Khamiss, Awatif

    2017-10-01

    Well logs from nine deep exploratory and development wells in Kuwaiti oil fields have been used to study petrophysical characteristics and their effect on the reservoir quality of the subsurface Paleozoic Khuff and Unayzah formations. Petrophysical log data have been calibrated with core analysis available at some intervals. The study indicates a complex lithological facies of the Khuff Formation that is composed mainly of dolomite and anhydrite interbeds with dispersed argillaceous materials and few limestone intercalations. This facies greatly lowered the formation matrix porosity and permeability index. The porosity is fully saturated with water, which is reflected by the low resistivity logs responses, except at some intervals where few hydrocarbon shows are recorded. The impermeable anhydrites, massive (low-permeability) carbonate rock and shale at the lower part of the formation combine to form intraformational seals for the clastic reservoirs of the underlying Unayzah Formation. By contrast, the log interpretation revealed clastic lithological nature of the Unayzah Formation with cycles of conglomerate, sandstone, siltstone, mudstone and shales. The recorded argillaceous materials are mainly of disseminated habit, which control, for some extent, the matrix porosity, that ranges from 2% to 15% with water saturation ranges from 65% to 100%. Cementation, dissolution, compaction and clay mineral authigenesis are the most significant diagenetic processes affecting the reservoir quality. Calibration with the available core analysis at some intervals of the formation indicates that the siliciclastic sequence is a fluvial with more than one climatic cycle changes from humid, semi-arid to arid condition and displays the impact of both physical and chemical diagenesis. In general, the study revealed that the Unyazah Formation has a better reservoir quality than the Khuff Formation and possible gas bearing zones.

  3. Shallow stratigraphy of the Skagit River Delta, Washington, derived from sediment cores

    Science.gov (United States)

    Grossman, Eric E.; George, Douglas A.; Lam, Angela

    2011-01-01

    Sedimentologic analyses of 21 sediment cores, ranging from 0.4 to 9.6 m in length, reveal that the shallow geologic framework of the Skagit River Delta, western Washington, United States, has changed significantly since 1850. The cores collected from elevations of 3.94 to -2.41 m (relative to mean lower low water) along four cross-shore transects between the emergent marsh and delta front show relatively similar environmental changes across an area spanning ~75 km2. Offshore of the present North Fork Skagit River and South Fork Skagit River mouths where river discharge is focused by diked channels through the delta, the entire 5–7-km-wide tidal flats are covered with 1–2 m of cross-bedded medium-to-coarse sands. The bottoms of cores, collected in these areas are composed of mud. A sharp transition from mud to a cross-bedded sand unit indicates that the tidal flats changed abruptly from a calm environment to an energetic one. This is in stark contrast to the Martha's Bay tidal flats north of the Skagit Bay jetty that was completed in the 1940s to protect the newly constructed Swinomish Channel from flooding and sedimentation. North of the jetty, mud ranging from 1 to 2 m thick drapes a previously silt- and sand-rich tidal flat. The silty sand is a sediment facies that would be expected there where North Fork Skagit River sedimentation occurred prior to jetty emplacement. This report describes the compositional and textural properties of the sediment cores by using geophysical, photographic, x-radiography, and standard sediment grain-size and carbon-analytical methods. The findings help to characterize benthic habitat structure and sediment transport processes and the environmental changes that have occurred across the nearshore of the Skagit River Delta. The findings will be useful for quantifying changes to nearshore marine resources, including impacts resulting from diking, river-delta channelization, shoreline development, and natural variations in fluvial-sediment

  4. The chemistry and mineralogy of haloed burrows in pelagic sediment at DOMES Site A: The equatorial North Pacific

    Science.gov (United States)

    Piper, D.Z.; Rude, P.D.; Monteith, S.

    1987-01-01

    The chemical and mineralogical composition of burrowed sediment, recovered in 66 box cores at latitude 9??25???N and longitude 151??15???W in the equatorial Pacific, demonstrates the important role of infauna in determining the geochemistry of pelagic sediment. Haloed burrows, approximately 3 cm across, were present in many of the cores. Within early Tertiary sediment that was covered by less than 5 cm of surface Quaternary sediment in several cores, the burrows in cross-section consist of three units: (1) a dark yellowish-brown central zone of Quaternary sediment surrounded, by (2) a pale yellowish-orange zone (the halo) of Tertiary sediment, which is surrounded by (3) a metal-oxide precipitate; the enclosing Tertiary sediment is dusky brown. Several elements - Mn, Ni, Cu, Co, Zn, Sb and Ce - have been leached from the light-colored halo, whereas Cr, Cs, Hf, Rb, Sc, Ta, Th, U, the rare earth elements exclusive of Ce, and the major oxides have not been leached. The metal-oxide zone, 1-5 mm thick, contains as much as 16% MnO2, as the mineral todorokite. The composition of the todorokite, exclusive of the admixed Tertiary sediment, resembles the composition of the metal deficit of the halo and also the composition of surface ferromanganese nodules that have been interpreted as having a predominantly diagenetic origin. Thus bioturbation contributes not only to the redistribution of metals within pelagic sediment, but also to the accretion of ferromanganese nodules on the sea floor. ?? 1987.

  5. The role of episodic fire-related debris flows on long-term (103-104) sediment yields in the Middle Fork Salmon River Watershed, in central Idaho

    Science.gov (United States)

    Riley, K. E.; Pierce, J. L.; Hopkins, A.

    2010-12-01

    Episodic fire-related debris flows contribute large amounts of sediment and large woody debris to streams. This study evaluates fire-related sedimentation from small steep tributaries of the Middle Fork Salmon River (MFSR) in central Idaho to evaluate the timing, frequency, and magnitude of episodic fire-related sedimentation on long-term (10 3-10 4) sediment yields. The MFSR lies within the Northern Rocky Mountains and encompasses a range of ecosystems including high elevation (~3,000 -1,700 m) subalpine pine and spruce forests, mid-elevation (2650 - 1130 m) montane Douglas-fir and ponderosa pine-dominated forests and low elevation (~ 1,800 - 900 m) sagebrush steppe. Recent debris flow events in tributaries of the MFSR appear to primarily result from increased surface runoff, rilling, and progressive sediment bulking following high severity fires. This study estimates: 1) the volume of sediment delivered by four recent (1997-2008) fire-related debris flow events using real time kinematic GPS surveys, and 2) the timing of Holocene fire-related debris flow events determined by 14C dating charcoal fragments preserved in buried burned soils and within fire-related deposits. Our measured volumes of the four recent debris flow events are compared to two empirically derived volume estimates based on remotely sensed spatial data (burn severity and slope), measured geometric data (longitudinal profile, cross sectional area, flow banking angle), and precipitation records. Preliminary stratigraphic profiles in incised alluvial fans suggest that a large percentage of alluvial fan thickness is composed of fire-related deposits suggesting fire-related hillslope erosion is a major process delivering sediment to alluvial fans and to the MFSR. Fire-related deposits from upper basins compose ~71% of total alluvial fan thickness, while fire-related deposits from lower basins make up 36% of alluvial fan thickness. However, lower basins are less densely vegetated with small diameter

  6. A study of the distribution, structure and seismic stratigraphy of syn-breakup and post-breakup sediments in the Faroe sector of the Faroe-Shetland Basin

    DEFF Research Database (Denmark)

    Olavsdottir, Jana

    Emplacement of the Cenozoic sediments in the Faroese sector of the Faroe-Shetland Basin appear to be controlled by decelerating thermal subsidence of the basin, and local uplift of sediment source areas. However, the actual distribution of sediments appears to be controlled by re-activation...... of older, Mesozoic structural elements controlling the sediment path way and restricting the depositional areas. The structural elements being re-activated at different times causing considerable structural complexity. Understanding older, Mesozoic, structural elements control on sedimentation...... is a potential tool understanding deviations from “normal” thermal subsidence and for predicting the prospectivity in syn- and post-rift succession in the Faroe-Shetland Basin. On top of the basalt in the Faroe-Shetland Basin there is deposited up to 3.5 km thick sedimentary package, which led into the basin...

  7. Sediment plume model-a comparison between use of measured turbidity data and satellite images for model calibration.

    Science.gov (United States)

    Sadeghian, Amir; Hudson, Jeff; Wheater, Howard; Lindenschmidt, Karl-Erich

    2017-08-01

    In this study, we built a two-dimensional sediment transport model of Lake Diefenbaker, Saskatchewan, Canada. It was calibrated by using measured turbidity data from stations along the reservoir and satellite images based on a flood event in 2013. In June 2013, there was heavy rainfall for two consecutive days on the frozen and snow-covered ground in the higher elevations of western Alberta, Canada. The runoff from the rainfall and the melted snow caused one of the largest recorded inflows to the headwaters of the South Saskatchewan River and Lake Diefenbaker downstream. An estimated discharge peak of over 5200 m 3 /s arrived at the reservoir inlet with a thick sediment front within a few days. The sediment plume moved quickly through the entire reservoir and remained visible from satellite images for over 2 weeks along most of the reservoir, leading to concerns regarding water quality. The aims of this study are to compare, quantitatively and qualitatively, the efficacy of using turbidity data and satellite images for sediment transport model calibration and to determine how accurately a sediment transport model can simulate sediment transport based on each of them. Both turbidity data and satellite images were very useful for calibrating the sediment transport model quantitatively and qualitatively. Model predictions and turbidity measurements show that the flood water and suspended sediments entered upstream fairly well mixed and moved downstream as overflow with a sharp gradient at the plume front. The model results suggest that the settling and resuspension rates of sediment are directly proportional to flow characteristics and that the use of constant coefficients leads to model underestimation or overestimation unless more data on sediment formation become available. Hence, this study reiterates the significance of the availability of data on sediment distribution and characteristics for building a robust and reliable sediment transport model.

  8. Initial study of sediment antagonism and characteristics of silver nanoparticle-coated biliary stents in an experimental animal model

    Directory of Open Access Journals (Sweden)

    Tian Y

    2016-04-01

    Full Text Available Yigeng Tian,1,* Mingfeng Xia,2,* Shuai Zhang,3 Zhen Fu,4 Qingbin Wen,2 Feng Liu,4 Zongzhen Xu,4 Tao Li,4 Hu Tian4 1Department of Physics, School of Physics and Technology, University of Jinan, Jinan, Shandong, People’s Republic of China; 2Department of Surgery, Shandong University of Traditional Chinese Medicine, Jinan, Shandong, People’s Republic of China; 3Department of General Surgery, Sixth People’s Hospital of Jinan, Jinan, Shandong, People’s Republic of China; 4Department of General Surgery, Shandong Provincial Qianfoshan Hospital, Shandong University, Jinan, Shandong, People’s Republic of China *These authors contributed equally to this work Objective: Plastic biliary stents used to relieve obstructive jaundice are frequently blocked by sediment, resulting in loss of drainage. We prepared stents coated with silver nanoparticles (AgNPs and compared their ability to resist sedimentation with Teflon stents in a beagle model of obstructive jaundice.Methods: AgNP-coated Teflon biliary stents were prepared by chemical oxidation–reduction and evaluated in an obstructive jaundice model that was produced by ligation of common bile duct (CBD; animals were randomized to two equal groups for placement of AgNP-coated or Teflon control stents. Liver function and inflammatory index were found to be similar in the two groups, and the obstruction was relieved. Stents were removed 21 days after insertion and observed by scanning and transmission electron microscopy. The AgNP coating was analyzed by energy dispersive X-ray analysis (EDXA, and the composition of sediment was assayed by Fourier-transform infrared (FTIR spectroscopy.Results: Electron microscopy revealed a black, closely adherent AgNP stent coating, with thicknesses of 1.5–6 µm. Sediment thickness and density were greater on Teflon than on AgNP-coated stents. EDXA confirmed the stability and integrity of the AgNP coating before and after in vivo animal experimentation. FTIR

  9. Stability of fenbendazole suspensions for veterinary use. Correlation between zeta potential and sedimentation.

    Science.gov (United States)

    Arias, José L; López-Viota, Margarita; Clares, Beatriz; Ruiz, Ma Adolfina

    2008-08-07

    In this paper we have carried out a detailed investigation of the stability and redispersibility characteristics of fenbendazole aqueous suspensions, through a thermodynamic and electrokinetic characterization, considering the effect of both pH and ionic strength. The hydrophobic character of the drug, and the surface charge and electrical double-layer thickness play an essential role in the stability of the system, hence the need for a full characterization of fenbendazole. It was found that the drug suspensions displays "delayed" or "hindered" sedimentation, determined by their hydrophobic character and their low zeta potential (indicating a small electrokinetic charge on the particles). The electrostatic repulsion between the particles is responsible for the low sedimentation volume and poor redispersibility of the drug. However, only low concentrations of AlCl(3) induced a significant effect on both the zeta potential and stability of the drug, leading to a "free-layered" sedimentation and a very easy redispersion which could be of great interest in the design of an oral pharmaceutical dosage form for veterinary.

  10. The structure of hydrate bearing fine grained marine sediments

    Energy Technology Data Exchange (ETDEWEB)

    Priest, J.; Kingston, E.; Clayton, C. [Southampton Univ., Highfield (United Kingdom). School of Civil Engineering and the Environment; Schultheiss, P.; Druce, M. [Geotek Ltd., Daventry (United Kingdom)

    2008-07-01

    This paper discussed the structure of naturally occurring methane gas hydrates in fine-grained sediments from core samples recovered using in situ pressures from the eastern margin of the Indian Ocean. High resolution X-ray computed tomography (CT) images were taken of gas hydrate cores. The hydrate structure was examined and comparisons were made between low resolution X-ray images obtained on the cores prior to sub-sectioning and depressurization procedures. The X-ray images showed the presence of high-angle, sub-parallel veins within the recovered sediments. The scans indicated that the hydrates occurred as fracture filing veins throughout the core. Fracture orientation was predominantly sub-vertical. Thick millimetric hydrate veins were composed of sub-millimetric veins with variations in fracture angle. The analysis indicated that hydrate formation was episodic in nature and subject to changes in the stress regime. Results of the study showed that depressurization and subsequent freezing alter the structure of the sediment even when the gas hydrate has not been altered. A large proportion of the hydrate survived when outside of its stability region. The self-preserving behaviour of the hydrate was attributed to the endothermic nature of gas hydrate dissociation. It was concluded that the accurate physical characterization of gas hydrates can only be conducted when the core section remains under in situ stress conditions. 13 refs., 9 figs.

  11. Targeting sediment management strategies using sediment quantification and fingerprinting methods

    Science.gov (United States)

    Sherriff, Sophie; Rowan, John; Fenton, Owen; Jordan, Phil; hUallacháin, Daire Ó.

    2016-04-01

    Cost-effective sediment management is required to reduce excessive delivery of fine sediment due to intensive land uses such as agriculture, resulting in the degradation of aquatic ecosystems. Prioritising measures to mitigate dominant sediment sources is, however, challenging, as sediment loss risk is spatially and temporally variable between and within catchments. Fluctuations in sediment supply from potential sources result from variations in land uses resulting in increased erodibility where ground cover is low (e.g., cultivated, poached and compacted soils), and physical catchment characteristics controlling hydrological connectivity and transport pathways (surface and/or sub-surface). Sediment fingerprinting is an evidence-based management tool to identify sources of in-stream sediments at the catchment scale. Potential sediment sources are related to a river sediment sample, comprising a mixture of source sediments, using natural physico-chemical characteristics (or 'tracers'), and contributions are statistically un-mixed. Suspended sediment data were collected over two years at the outlet of three intensive agricultural catchments (approximately 10 km2) in Ireland. Dominant catchment characteristics were grassland on poorly-drained soils, arable on well-drained soils and arable on moderately-drained soils. High-resolution (10-min) calibrated turbidity-based suspended sediment and discharge data were combined to quantify yield. In-stream sediment samples (for fingerprinting analysis) were collected at six to twelve week intervals, using time-integrated sediment samplers. Potential sources, including stream channel banks, ditches, arable and grassland field topsoils, damaged road verges and tracks were sampled, oven-dried (account for particle size and organic matter selectivity processes. Contributions from potential sources type groups (channel - ditches and stream banks, roads - road verges and tracks, fields - grassland and arable topsoils) were

  12. Effects of bioirrigation on the spatial and temporal dynamics of oxygen above the sediment-water interface

    DEFF Research Database (Denmark)

    Murniati, E.; Gross, D.; Herlina, H.

    2017-01-01

    Burrow ventilation by tube-dwelling benthic animals affects solute exchange between sediments and water by 2 means. Drawing of O2-rich water into the burrow increases O2 availability in the sediment and stimulates biogeochemical and microbial processes, whereas flushing of the burrow creates a 3......-dimensional flow field above the burrow, which induces mixing. Previous studies have revealed the role of the diffusive boundary layer (DBL) thickness on the exchange of solutes between the sediment and overlying water. Mapping the O2 gradient within the DBL is a challenging task in the presence of benthic...... the outlet of the burrows and drawdown of O2-rich water above the inlet caused by peristaltic pumping of C. plumosus larvae. Vertical O2 gradients changed dynamically during burrow ventilation relative to in a control tank without animals. The advective transport of O2 above the opening caused by burrow...

  13. Sediment acoustic index method for computing continuous suspended-sediment concentrations

    Science.gov (United States)

    Landers, Mark N.; Straub, Timothy D.; Wood, Molly S.; Domanski, Marian M.

    2016-07-11

    Suspended-sediment characteristics can be computed using acoustic indices derived from acoustic Doppler velocity meter (ADVM) backscatter data. The sediment acoustic index method applied in these types of studies can be used to more accurately and cost-effectively provide time-series estimates of suspended-sediment concentration and load, which is essential for informed solutions to many sediment-related environmental, engineering, and agricultural concerns. Advantages of this approach over other sediment surrogate methods include: (1) better representation of cross-sectional conditions from large measurement volumes, compared to other surrogate instruments that measure data at a single point; (2) high temporal resolution of collected data; (3) data integrity when biofouling is present; and (4) less rating curve hysteresis compared to streamflow as a surrogate. An additional advantage of this technique is the potential expansion of monitoring suspended-sediment concentrations at sites with existing ADVMs used in streamflow velocity monitoring. This report provides much-needed standard techniques for sediment acoustic index methods to help ensure accurate and comparable documented results.

  14. Vertical distribution of radioactive particles in Ottawa River sediment near the Chalk River Laboratories

    International Nuclear Information System (INIS)

    Lee, D.R.; Hartwig, D.S.

    2011-01-01

    Previously, we described an area of above-background levels of radioactivity in the bed of the Ottawa River near the Chalk River Laboratories. The area was about 200 m wide by 400 m long and in water 8 to 30 m deep. The source of the radioactivity was associated with the location of cooling-water discharge. Particles of radioactive material were later recovered from the upper 10-15 cm of sediment and were determined to be sand-sized grains of nuclear fuel and corrosion products. This report provides an examination of the vertical distribution of radioactive particles in the riverbed. Twenty-three dredge samples (representing 1.2 m 2 of riverbed) were collected near the Process Outfall. Each dredge sample was dissected in horizontal intervals 1-cm-thick. Each interval provided a 524 cm 3 sample of sediment that was carefully examined for particulate radioactivity. Approximately 80% of the radioactivity appeared to be associated with discrete particles. Although the natural sediment in the general area is cohesive, silty clay and contains less than 10% sand, the sediment near the Outfall was found to be rich in natural sand, presumably from sources such as winter sanding of roads at the laboratories. The radioactive particles were almost entirely contained in the top-most 10 cm of the river bed. The majority of the particles were found several centimetres beneath the sediment surface and the numbers of particles and the radioactivity of the particles peaked 3 to 7 cm below the sediment surface. Based on the sediment profile, there appeared to have been a marked decrease in the deposition of particulate radioactivity in recent decades. The vertical distribution of radioactive particles indicated that sedimentation is resulting in burial and that the deposition of most of the particulate radioactivity coincided with the operation of Chalk River's NRX reactor from 1947 to 1992. (author)

  15. Choroidal thickness in Malaysian eyes with full-thickness macular holes

    Directory of Open Access Journals (Sweden)

    Chew Y Tan

    2018-02-01

    Full Text Available AIM: To compare choroidal thickness at the macula in eyes with unilateral idiopathic full-thickness macular holes(FTMHwith that of unaffected fellow eyes, and eyes of normal control patients.METHODS: Cross-sectional study. Thirty patients with unilateral idiopathic FTMH and thirty age, sex, and race-matched controls were recruited. Axial lengths were measured using laser interferometry. Enhanced depth imaging optical coherence tomography images were obtained using Heidelberg spectral-domain optical coherence tomography. Choroidal thickness was measured at the fovea, and at 1 mm and 2 mm nasally, temporally, superiorly and inferiorly from the center of the fovea. Statistical analysis was performed using independent and paired t-tests, chi-square tests, and Pearson correlation tests(PRESULTS: The mean subfoveal choroidal thickness was 201.0±44.0 μm in the FTMH group, 225.3±51.4 μm in the fellow eye group and 262.3±70.3 μm in the control group. The choroid was thinner in FTMH eyes at all locations when compared to control eyes(PPP>0.05. Choroidal thickness was generally highest subfoveally and lowest nasally. Subfoveal choroidal thickness was negatively correlated with age(r=-0.278, P=0.032, and axial length(r=-0.328, P=0.011.CONCLUSION: Choroidal thickness is lower in both eyes of patients with unilateral FTMH compared to healthy control eyes.

  16. New U-Pb ages in the Diablillos Intrusive Complex, Southern Puna, Argentina: A long magmatic event in the Paleozoic Arc, SW Gondwana

    International Nuclear Information System (INIS)

    Ortiz, Agustin; Hauser, Natalia

    2015-01-01

    The Puna geological region comprises Salta, Jujuy and Catamarca provinces, northwestern Argentina. This 4000 meter above sea level high-plateau region lies between the Central Argentinian Andes. The Puna basement in the central Andes consists of Proterozoic–Paleozoic metamorphic rocks and granitoids. Diverse authors, proposed different models to explain the origin of the basement, where two orogenic events are recognized: the Pampean (Upper Precambrian–Lower Cambrian) and Famatinian (Upper Cambrian–Lower Silurian) (e.g. Ramos et al., 1986; Ramos, 1988; Loewy et al., 2004; for opposite points of view see Becchio et al., 1999; Bock et al., 2000; Buttner et al., 2005). Hence, Lucassen et al. (2000) proposed for the Central Andean basement, an evolution in a mobile belt, where the Pampean and Famatinian cycles are not distinct events but, they are one single, non-differentiable event from 600 to 400 Ma. The mobile belt culminated in low-P/ high-T metamorphism at approximately 525-500 Ma. Then, these were followed by a long-lasting high-thermal gradient regime in the mid-crust until Silurian times. Becchio et al., (2011) defined the Diablillos Intrusive Complex (CID, by its Spanish name), emplaced in the Inca Viejo Range. This range splits the Salares Ratones-Centenario with the Salar Diablillos (Fig.1). This Complex is located in the Eastern Magmatic Belt, Southern Puna, Argentina. Here we present new zircons U-Pb ages by LA-MC-ICPMS in the Diablillos Intrusive Complex, contributing to understanding the magmatic event in the lower Paleozoic arc, SW Gondwana. (author)

  17. New U-Pb ages in the Diablillos Intrusive Complex, Southern Puna, Argentina: A long magmatic event in the Paleozoic Arc, SW Gondwana

    Energy Technology Data Exchange (ETDEWEB)

    Ortiz, Agustin; Hauser, Natalia [Universidade de Brasilia (UnB), DF (Brazil). Instituto de Geociencias. Lab. de Geocronologia; Becchio, Raul; Nieves, Alexis; Suzano, Nestor [Universidad Nacional de Salta (UNSa)-CONICET, Salta (Argentina)

    2015-07-01

    The Puna geological region comprises Salta, Jujuy and Catamarca provinces, northwestern Argentina. This 4000 meter above sea level high-plateau region lies between the Central Argentinian Andes. The Puna basement in the central Andes consists of Proterozoic–Paleozoic metamorphic rocks and granitoids. Diverse authors, proposed different models to explain the origin of the basement, where two orogenic events are recognized: the Pampean (Upper Precambrian–Lower Cambrian) and Famatinian (Upper Cambrian–Lower Silurian) (e.g. Ramos et al., 1986; Ramos, 1988; Loewy et al., 2004; for opposite points of view see Becchio et al., 1999; Bock et al., 2000; Buttner et al., 2005). Hence, Lucassen et al. (2000) proposed for the Central Andean basement, an evolution in a mobile belt, where the Pampean and Famatinian cycles are not distinct events but, they are one single, non-differentiable event from 600 to 400 Ma. The mobile belt culminated in low-P/ high-T metamorphism at approximately 525-500 Ma. Then, these were followed by a long-lasting high-thermal gradient regime in the mid-crust until Silurian times. Becchio et al., (2011) defined the Diablillos Intrusive Complex (CID, by its Spanish name), emplaced in the Inca Viejo Range. This range splits the Salares Ratones-Centenario with the Salar Diablillos (Fig.1). This Complex is located in the Eastern Magmatic Belt, Southern Puna, Argentina. Here we present new zircons U-Pb ages by LA-MC-ICPMS in the Diablillos Intrusive Complex, contributing to understanding the magmatic event in the lower Paleozoic arc, SW Gondwana. (author)

  18. Paleozoic magmatism and porphyry Cu-mineralization in an evolving tectonic setting in the North Qilian Orogenic Belt, NW China

    Science.gov (United States)

    Qiu, Kun-Feng; Deng, Jun; Taylor, Ryan D.; Song, Kai-Rui; Song, Yao-Hui; Li, Quan-Zhong; Goldfarb, Richard J.

    2016-05-01

    The NWW-striking North Qilian Orogenic Belt records the Paleozoic accretion-collision processes in NW China, and hosts Paleozoic Cu-Pb-Zn mineralization that was temporally and spatially related to the closure of the Paleo Qilian-Qinling Ocean. The Wangdian Cu deposit is located in the eastern part of the North Qilian Orogenic Belt, NW China. Copper mineralization is spatially associated with an altered early Paleozoic porphyritic granodiorite, which intruded tonalites and volcaniclastic rocks. Alteration zones surrounding the mineralization progress outward from a potassic to a feldspar-destructive phyllic assemblage. Mineralization consists mainly of quartz-sulfide stockworks and disseminated sulfides, with ore minerals chalcopyrite, pyrite, molybdenite, and minor galena and sphalerite. Gangue minerals include quartz, orthoclase, biotite, sericite, and K-feldspar. Zircon LA-ICPMS U-Pb dating of the ore-bearing porphyritic granodiorite yielded a mean 206Pb/238U age of 444.6 ± 7.8 Ma, with a group of inherited zircons yielding a mean U-Pb age of 485 ± 12 Ma, consistent with the emplacement age (485.3 ± 6.2 Ma) of the barren precursor tonalite. Rhenium and osmium analyses of molybdenite grains returned model ages of 442.9 ± 6.8 Ma and 443.3 ± 6.2 Ma, indicating mineralization was coeval with the emplacement of the host porphyritic granodiorite. Rhenium concentrations in molybdenite (208.9-213.2 ppm) suggest a mantle Re source. The tonalities are medium-K calc-alkaline. They are characterized by enrichment of light rare-earth elements (LREEs) and large-ion lithophile elements (LILEs), depletion of heavy rare-earth elements (HREEs) and high-field-strength elements (HFSEs), and minor negative Eu anomalies. They have εHf(t) values in the range of +3.6 to +11.1, with two-stage Hf model ages of 0.67-1.13 Ga, suggesting that the ca. 485 Ma barren tonalites were products of arc magmatism incorporating melts from the mantle wedge and the lithosphere. In contrast, the

  19. Seasonal measurement and dose assessment of natural radionuclides in sediments of Darbandikhan Lake in Kurdistan-Iraq

    Science.gov (United States)

    Omer Jafir, Adeeb; Ahmed, Ali Hassan; Saridan, Wan Muhammad

    2017-11-01

    A total of 100 sediment samples were collected from Darbandikhan Lake and its different resources (spring, stream, and lake) during the four seasons. Spectrometry analysis of HPGe detector was used for measuring the specific activity. The seasonally measured mean activity concentration of 238U, 232Th and40K for sediment samples were 11.9±1.0, 7.8±1.0 and 213.4±3.4 Bq/kg in spring; 9.2±1.1, 7.9±1.0 and 205.8±3.0 Bq/kg in summer; 12.7±1.5, 8.2±1.0 and 188.1±3.1 Bq/kg in autumn; 11.9±1.6, 9.1±1.0 and 218.7±3.0 Bq/kg in winter, respectively. The obtained activity concentrations of 238U, 232Th and 40K are all below the recommended values suggested by UNSCEAR (2000) for sediment 35, 30 and 400 Bq/kg, respectively. The ordinary kriging method was used to draw the contour maps using the surfer digital program. RESRAD-BUILD simulation code was used to determine the indoor dose, annual dose rate and cancer risks received and exposed to individuals in the dwellings, which show an increase over a period of 50 years. Two scenario descriptions of changing wall thickness and room dimension were, studied and they shows that the indoor dose and cancer risks increase with wall thicknesses until 50 cm and over a period of 50 years, as well as the increase of room size increases the internal dose and cancer risks inside the buildings. From the analyzed results it was concluded that the sediments in the Darbandikhan Lake has no risks when used in building construction.

  20. Quantifying trail erosion and stream sedimentation with sediment tracers

    Science.gov (United States)

    Mark S. Riedel

    2006-01-01

    Abstract--The impacts of forest disturbance and roads on stream sedimentation have been rigorously investigated and documented. While historical research on turbidity and suspended sediments has been thorough, studies of stream bed sedimentation have typically relied on semi-quantitative measures such as embeddedness or marginal pool depth. To directly quantify the...

  1. Investigating Deep-Marine Sediment Waves in the Northern Gulf of Mexico Using 3D Seismic Data

    Science.gov (United States)

    Wang, Z.; Gani, M. R.

    2016-12-01

    Deep-water depositional elements have been studied for decades using outcrop, flume tank, sidescan sonar, and seismic data. Even though they have been well recognized by researchers, the improvements in the quality of 3D seismic data with increasingly larger dimension allow detailed analysis of deep-water depositional elements with new insights. This study focuses on the deep-marine sediment waves in the northern Gulf of Mexico. By interpreting a 3D seismic dataset covering 635 km2 at Mississippi Canyon and Viosca Knoll areas, large sediment waves, generated by sediment gravity flows, were mapped and analyzed with various seismic attributes. A succession of sediment waves, approximately 100 m in thickness, is observed on the marine slope that tapers out at the toe of the slope. The individual sediment wave exhibits up to 500 m in wavelength and up to 20 m in height. The wave crests oriented northeast-southwest are broadly aligned parallel to the regional slope-strike, indicating their sediment gravity flow origin. The crestlines are straight or slightly sinuous, with sinuosity increasing downslope. Their anti-dune patterns likely imply the presence of supercritical flows. The sediment waves have a retrogradational stacking pattern. Seismic amplitude maps of each sediment wave revealed that after depositing the majority of sheet-like sands on the upper slope, sediment gravity flows started to form large sediment waves on the lower slope. The steep and narrow upcurrent flanks of the sediment waves always display higher amplitudes than the gentle and wide downcurrent flanks, indicating that the sands were likely preferentially trapped along the upcurrent flanks, whereas the muds spread along the downcurrent flanks. The formation of sediment waves likely requires a moderate sand-mud ratio, as suggested by these observations: (1) absence of sediment waves on the upper slope where the sands were mainly deposited as unconfined sheets with a high sand-mud ratio; (2

  2. Combining sediment fingerprinting and a conceptual model for erosion and sediment transfer to explore sediment sources in an Alpine catchment

    Science.gov (United States)

    Costa, A.; Stutenbecker, L.; Anghileri, D.; Bakker, M.; Lane, S. N.; Molnar, P.; Schlunegger, F.

    2017-12-01

    In Alpine basins, sediment production and transfer is increasingly affected by climate change and human activities, specifically hydropower exploitation. Changes in sediment sources and pathways significantly influence basin management, biodiversity and landscape evolution. We explore the dynamics of sediment sources in a partially glaciated and highly regulated Alpine basin, the Borgne basin, by combining geochemical fingerprinting with the modelling of erosion and sediment transfer. The Borgne basin in southwest Switzerland is composed of three main litho-tectonic units, which we characterised following a tributary-sampling approach from lithologically characteristic sub-basins. We analysed bulk geochemistry using lithium borate fusion coupled with ICP-ES, and we used it to discriminate the three lithologic sources using statistical methods. Finally, we applied a mixing model to estimate the relative contributions of the three sources to the sediment sampled at the outlet. We combine results of the sediment fingerprinting with simulations of a spatially distributed conceptual model for erosion and transport of fine sediment. The model expresses sediment erosion by differentiating the contributions of erosional processes driven by erosive rainfall, snowmelt, and icemelt. Soil erodibility is accounted for as function of land-use and sediment fluxes are linearly convoluted to the outlet by sediment transfer rates for hillslope and river cells, which are a function of sediment connectivity. Sediment connectivity is estimated on the basis of topographic-hydraulic connectivity, flow duration associated with hydropower flow abstraction and permanent storage in hydropower reservoirs. Sediment fingerprinting at the outlet of the Borgne shows a consistent dominance (68-89%) of material derived from the uppermost, highly glaciated reaches, while contributions of the lower part (10-25%) and middle part (1-16%), where rainfall erosion is predominant, are minor. This result is

  3. Sedimentation of the Enan suite of the lower to middle Jurassic and coal reserves of the southeastern margin of the Ordos basin (China)

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Y

    1983-01-01

    The studied coal bearing series has a parallel origin. The following facial complexes are isolated in its composition: lakes free of vegetation without coal interlayers; overgrown lakes of their margins which are poor in coals; swampy lakes, whose peat beds formed coal layers of shallow or moderate depth; channel sediments without coal layers and swamps from between channel spaces which created thick coal strata of high quality for which, however, a strong changeability in thickness is intrinsic. The coal strata are normally split towards the central parts of the lake basins and river channels. The coal presence of the suite is reduced along the section which is associated with the replacement of the lake swamp conditions of sedimentation by lake river conditions. A paleotectonic analysis established that the distribution of the zones richest in coal was controlled by consedimentational structural elements.

  4. Neogene biogenic sediments of onshore Peru. Part 2. Geochemistry and diagenesis

    Energy Technology Data Exchange (ETDEWEB)

    Baker, P.A.; Dunbar, R.B.; Marty, R.C.

    1985-01-01

    The Neogene sediments of coastal Peru are comprised in part of biogenic silica, phosphorites, and authigenic dolomites. The authors have studied these sediments in the Pisco Basin of southern Peru. In this region the sediments have escaped large-scale post-depositional structural or thermal overprinting. The phosphorites of the Middle Member of the Miocene Pisco Formation occur as 5 to 10 cm. thick beds of phosphatic sediments separated by meters of siliceous, tuffaceous, or dolomitic muds and silts. The phosphatic grains are usually colitic and the depositions are often channeled and reworked on a small scale. Many of these colitic beds disconformably overlie phosphatized dolomitic beds. The dolomites of the Pisco Formation occur as authigenic beds and nodules a few centimeters to over one meter in diameter. They occur at intervals of one to tens of meters. The dolomites are well-ordered and calcite-free. The mole percent calcium varies from 47.3 to 57.4, iron from 0.12 to 2.18, and manganese from 0.03 to 0.62. Strontium varies from 90 to 837 ppm, zinc from 12 to 124 ppm, and sulfate from 100 to 2000 ppm. The carbon isotopic composition of the Pisco dolomites is usually negative, varying from +7.05 to -21.86 per mil PDB. The oxygen isotopic compositions vary from -0.18 to +4.16 per mil PDB. These chemical signatures are consistent with rapid authigenic formation of the dolomite: (1) within a few meters of the sea floor, (2) at shallow water depths, (3) in sediments undergoing microbial sulfate reduction but in the presence of some dissolved sulfate, and (4) in the absence of thermal or fresh water diagenetic overprinting.

  5. Aerial gamma ray and magnetic survey, Montrose detail Area 2, Colorado. Final report

    International Nuclear Information System (INIS)

    1980-04-01

    The Montrose Detail Area No. 2 covers 315 square miles of area along the western edge of the Sawatch Mountains. Precambrian crystalline rocks and Paleozoic sediments share dominance in the area. The Paleozoic section deepens toward the north. Some Tertiary intrusive and extrusive rocks that may relate to the nearby igneous activity in the San Juan Mountains are present in the area. Cretaceous and Jurassic sediments also have limited exposure. The Whitepine Mining District (Zn-Pb) lies in the southern end of the detail area. Mineralization occurs in shear zones along the contact between Early Paleozoics and Precambrian rocks. Two uranium deposits occur nearby in a similar geologic setting. One other known uranium deposit occurs in the northern end of the detail area. The geologic characteristics of this deposit are not known. A total of 37 groups of samples in the uranium window constitute anomalies as defined in Volume I. These anomalies cluster over the high uranium count rate areas in the Fossil Ridge-Taylor River and Canyon Creek areas. Highest count rates appear to be associated with faulted Early Paleozoics and adjacent Precambrian rocks. Some high count rate localities appear to overlie isolated Tertiary intrusive bodies. Magnetic data do not outline structural features as mapped by Tweto and others (1976). Some areas mapped as Precambrian and others mapped as Tertiary intrusives have associated high magnetic gradients. Other areas mapped similarly do not have high magnetic gradients. Little correlation with the radiometric data was expected or observed. Three geochemical subdivisions were made on the basis of radiometric data according to the criteria set forth in Volume I, only two of which appeared to have any apparent geologic meaning. Multivariate analysis lends support to this conclusion

  6. Acoustic Velocity Data for Clay Bearing Carbonate Rocks

    DEFF Research Database (Denmark)

    Lind, Ida; Shogenova, Alla

    1998-01-01

    Two sets of acoustic data on carbonates were combined to span the porosity interval from below 5% to more than 75%: dolomite and limestone of Paleozoic age from Estonia and mixed sediments from the Caribbean. The carbonate content of the samples ranges from less than 50% to 100%, and it was attem...

  7. Was the extreme and widespread marine oil-snow sedimentation and flocculent accumulation (MOSSFA) event during the Deepwater Horizon blow-out unique?

    NARCIS (Netherlands)

    Vonk, S.M.; Hollander, D.J.; Murk, A.J.

    2015-01-01

    During the Deepwater Horizon blowout, thick layers of oiled material were deposited on the deep seafloor. This large scale benthic concentration of oil is suggested to have occurred via the process of Marine Oil Snow Sedimentation and Flocculent Accumulation (MOSSFA). This meta-analysis investigates

  8. Alternative procedure to determine radionuclide concentrations for marine sediment dating

    International Nuclear Information System (INIS)

    Palacios, D; Sajo-Bohus, L.; Alfonso, J.; Perez, K.; Trujillo, M.

    2006-01-01

    The development of an alternative method to prepare and to measure marine sediment samples for dating purpose using high resolution gamma spectrometry is given. To calculate the 137 Cs and the supported and unsupported 210 Pb concentrations, cylindrical tablets subjected to different pressures were analyzed. Mass attenuation coefficients (MAC) were determined by our variant of the transmission method, the Bragg law (using MACs provided by the web program XCOM) and the method of average composition of the analyzed sediment samples. The differences between obtained results are smaller than the experimental error (10%). The influence of pressure and sediment mass on the MAC, mechanical stability of the sample, and self-absorption corrections for different gamma energies is studied. Optimal dimensions of the tablets were determined from considerations on the infinite thickness, minimum detectable activity, precision of results, radiation self-absorption and geometric efficiency. Based on the differential peak absorption analysis, through a relative efficiency curve, a new method to evaluate the existence of radioactive equilibrium between 226 Ra, 222 Rn and its progeny is given. Experimental error of the proposed methodology is evaluated, as well as accuracy, precision and detection limit. With the use of developed methodology, the 210 Pb, 226 Ra and 137 Cs activities in recent sediment samples from near shore of the Orinoco River Delta were determined. The results were comparable with the obtained by two of the most used methods, while precision is improved and radiation self-absorption in sample container is avoided since sample encapsulation is not required. (Full Text)

  9. Investigation of the heavy metal pollution of Danube delta sediments by TTPIXE analysis

    International Nuclear Information System (INIS)

    David, I.; Ciortea, C.; Enescu, S.; Fluerasu, D.; Dumitriu, D. E.; Dinescu, L.; Stochioiu, A.

    2001-01-01

    The elemental composition of sediments collected from some Danube Delta lakes (Malita, Furtuna, Lund, Mester and Sinoe), which are located in active sedimentary zones, was investigated by using two complementary methods: thick target proton-induced X-ray emission (TTPIXE) and instrumental neutron activation analysis (INAA) or X-ray fluorescence (XRF). The goal was to obtain a complete survey of heavy metal pollution and reconstruct recent pollution history in these Danube Delta lakes. Vertical distribution was analyzed, except for the case of Sinoe Lake, from which samples were collected only at the surface. During PIXE measurements, the pellets of 12 mm diameter and ∼ 1.5 mm thickness were bombarded using 3 MeV proton beams delivered by the FN-Tandem accelerator of IFIN-HH. The X-ray spectra were measured with a Ge-HP detector of 180 eV/5.9 KeV energy resolution for some micro.C charge accumulation. Control samples of reference sediments (IAEA, SL-1 and SOIL-7) prepared in the same conditions were also measured. Corrections were made for proton stopping and X-ray self-attenuation in the thick samples. Thirty-eight samples from the first four lakes and 7 samples from Sinoe Lake were analyzed, and the concentrations of 27 elements in every sample were determined by TTPIXE method. The following elements: S, Ca, Ti, Mn, Ni, Ga, Pb, and Hg could not be determined by INAA in our conditions. A typical measured spectrum where the presence of various pollutant elements is shown. Five elements - As, Br, Cr, Sb and Zn - were identified as pollutants by INAA method, showing concentrations about 1.5-2 x larger at the sediments surface. The vertical distribution of the presumed pollutant elements generally reflected the pollution history of the Danube Delta, namely a steady increase in pollution till the end of the 1980s, which can be associated with intense industrialization of Central and Eastern European countries prior to 1990. We think the interplay with TTPIXE method

  10. Petrogenesis of granitoids and associated xenoliths in the early Paleozoic Baoxu and Enping plutons, South China: Implications for the evolution of the Wuyi-Yunkai intracontinental orogen

    Science.gov (United States)

    Yu, Yang; Huang, Xiao-Long; Sun, Min; He, Peng-Li

    2018-05-01

    The early Paleozoic Wuyi-Yunkai orogen was associated with extensive felsic magmatic activities and the orogenic core was mainly distributed in the Yunkai and Wugong domains located in the western Cathaysia block and in the Wuyi domain located in the central part of the Cathaysia block. In order to investigate the evolution of the Wuyi-Yunkai orogen, elemental and Sr-Nd isotopic analyses were performed for granites from the Baoxu pluton in the Yunkai domain and from the Enping pluton in the central part of the Cathaysia block. The Baoxu pluton consists of biotite granite with abundant xenoliths of gneissic granite, granodiorite and diorite, and the Enping pluton is mainly composed of massive granodiorite. Biotite granites (441 ± 5 Ma) and gneissic granite xenolith (443 ± 4 Ma) of the Baoxu pluton are all weakly peraluminous (A/CNK = 1.05-1.10). They show high Sr/Y and La/Yb ratios and have negative bulk-rock εNd(t) values (-7.0 to -4.4), which are similar to coeval gneissic S-type granites in the Yunkai domain and were probably derived from dehydration melting of a sedimentary source with garnet residue in the source. Granodiorites (429 ± 3 Ma) from Enping and granodiorite xenolith (442 ± 4 Ma) from Baoxu are metaluminous and have REE patterns with enriched light REE and flat middle to heavy REE, possibly generated by the dehydration melting of an igneous basement at middle to lower crustal level. Diorite xenolith from Baoxu is ultrapotassic (K2O = 4.9 wt%), has high contents of MgO (7.0 wt%), Cr (379 ppm) and Ni (171 ppm) and shows pronounced negative Nb, Ta and Ti anomalies. This xenolith also has negative εNd(t) value (-3.6) and low Rb/Ba and high Ba/Sr ratios, and is thus interpreted to be derived from an enriched lithospheric mantle with the breakdown of phlogopite. Early Paleozoic I- and S-type granites in the Wuyi-Yunkai orogen mostly have negative εNd(t) values and do not have juvenile components, consistent with genesis by an intracontinental

  11. 3D gravity modeling of the Corrientes province (NE Argentina) and its importance to the Guarani Aquifer System

    Science.gov (United States)

    Mira, Andrés; Gómez Dacal, María Laura; Tocho, Claudia; Vives, Luis

    2013-11-01

    This paper presents a geological model of Corrientes province (Argentina) based on Bouguer gravity anomaly data, obtained in 2073 measurement points. To build the model, the IGMAS + interactive program was used. Two areas of approximately 135,000 km2 were modeled in this study. The selection of these areas was based on the sectors where the largest number of gravity anomaly measurements was made and other type of data was available to perform the parameterization (i.e, lithology profiles in boreholes, seismic profiles and audio-magnetotelluric AMT soundings). The initial geological configuration proposed was composed by four layers: basement, sediments (Paleozoic-Lower Cretaceous), basalts (Serra Geral Group, Lower Cretaceous) and post-basaltic sediments. The result shows a basement compartmentalized in structural blocks separated by large faults. The connection of Asunción and Río Grande Arches is confirmed along a structural high that crosses Corrientes province from SE to NW. The basaltic layer shows lateral changes in its thickness, due to faulting, almost disappearing on the NW of Corrientes. This structural configuration has a special hydrogeological importance because it produces the rise of the Guaraní Aquifer System sedimentary series near the surface and the intense fracture network makes this area prone to local recharge and regional discharge.

  12. Provenance and geological significance of red mud and other clastic sediments of the Mugnano cave (Montagnola Senese, Italy

    Directory of Open Access Journals (Sweden)

    Iacoviello Francesco

    2012-07-01

    Full Text Available The Mugnano cave is characterized by a thick clastic sedimentary fill showing a great variability of sedimentary facies, ranging from clay to coarse-grained sand deposits. This paper deals with combined sedimentological and mineralogical (XRD and SEM studies of these sediments and bedrock insoluble residues in order to understand the origin and geological significance of cave deposits, with particular attention to red mud sediments, often considered as the residue of host rock dissolution. Three different sedimentary facies were recognized: i YS, yellow sand with occasionally shell fragments, testifying the arrival of sediments from the surrounding landscape; ii RS, red laminated mud; iii GS, grey and red-grey mud and sand, dolomite-rich sediments. Furthermore, the results obtained in the present study allowed the identification of two fingerprint minerals: i quartz, present only as traces in the limestone host-rock, and ii dolomite, certainly related to the incomplete bedrock dissolution. Results obtained by this multidisciplinary approach testify that no one of the investigated sediments is representative of a completely autochthonous sedimentation (i.e. accumulation of insoluble residue of limestone in a cave environment. In fact, all the three sedimentary facies show a bulk composition rich in quartz, a mineral indicating an external origin for these sediments. Also the grey sediments, despite of their high content of bedrock- related dolomite, are quite rich in quartz and they testify the mixing of autochthonous and allocthonous sediments. The clay fraction of cave sediments shows strong compositional similarities with bedrock insoluble residue and consequently its analysis cannot be considered as a clear proxy for distinguishing between different parent materials. Therefore, the origin of these cave deposits is dominantly related to external sediments inputs, with terra rossa surface soils as the most probable parent material for red mud

  13. Sediment Resuspension and Deposition on Seagrass Leaves Impedes Internal Plant Aeration and Promotes Phytotoxic H2S Intrusion.

    Science.gov (United States)

    Brodersen, Kasper E; Hammer, Kathrine J; Schrameyer, Verena; Floytrup, Anja; Rasheed, Michael A; Ralph, Peter J; Kühl, Michael; Pedersen, Ole

    2017-01-01

    HIGHLIGHTS: Sedimentation of fine sediment particles onto seagrass leaves severely hampers the plants' performance in both light and darkness, due to inadequate internal plant aeration and intrusion of phytotoxic H 2 S. Anthropogenic activities leading to sediment re-suspension can have adverse effects on adjacent seagrass meadows, owing to reduced light availability and the settling of suspended particles onto seagrass leaves potentially impeding gas exchange with the surrounding water. We used microsensors to determine O 2 fluxes and diffusive boundary layer (DBL) thickness on leaves of the seagrass Zostera muelleri with and without fine sediment particles, and combined these laboratory measurements with in situ microsensor measurements of tissue O 2 and H 2 S concentrations. Net photosynthesis rates in leaves with fine sediment particles were down to ~20% of controls without particles, and the compensation photon irradiance increased from a span of 20-53 to 109-145 μmol photons m -2 s -1 . An ~2.5-fold thicker DBL around leaves with fine sediment particles impeded O 2 influx into the leaves during darkness. In situ leaf meristematic O 2 concentrations of plants exposed to fine sediment particles were lower than in control plants and exhibited long time periods of complete meristematic anoxia during night-time. Insufficient internal aeration resulted in H 2 S intrusion into the leaf meristematic tissues when exposed to sediment resuspension even at relatively high night-time water-column O 2 concentrations. Fine sediment particles that settle on seagrass leaves thus negatively affect internal tissue aeration and thereby the plants' resilience against H 2 S intrusion.

  14. determination of origin and channel sediments of o on of origin and ...

    African Journals Online (AJOL)

    user pc

    2017-12-02

    Dec 2, 2017 ... south-western Nigeria, is part of Nigerian complex which belongs to the. Precambrian to Early Paleozoic orogeny, comprises. Precambrian crystalline rocks with associated infold. Schist belts. The South-western Nigeria that hosts the study area (Osi) is gener represented by series of older metasediments a.

  15. Global distribution of radiolytic H2 production in marine sediment and implications for subsurface life

    Science.gov (United States)

    Sauvage, J.; Flinders, A. F.; Spivack, A. J.; D'Hondt, S.

    2017-12-01

    We present the first global estimate of radiolytic H2production in marine sediment. Knowledge of microbial electron donor production rates is critical to understand the bioenergetics of Earth's subsurface ecosystems In marine sediment, radiolysis of water by radiation from naturally occurring radionuclides leads to production of reduced (H2) and oxidized (H2O2, O2) species. Water radiolysis is catalyzed by marine sediment. The magnitude of catalysis depends on sediment composition and radiation type. Deep-sea clay is especially effective at enhancing H2 yields, increasing yield by more than an order of magnitude relative to pure water. This previously unrecognized catalytic effect of geological materials on radiolytic H2 production is important for fueling microbial life in the subseafloor, especially in sediment with high catalytic power. Our estimate of radiolytic H2 production is based on spatially integrating a previously published model and uses (i) experimentally constrained radiolytic H2 yields for the principal marine sediment types, (ii) bulk sediment radioactive element content of sediment cores in three ocean basins (N. Atlantic, N. and S. Pacific), and global distributions of (iii) seafloor lithology, (iv) sediment porosity, and (v) sediment thickness. We calculate that global radiolytic H2 production in marine sediment is 1.6E+12 mol H2 yr-1. This production rate is small relative to the annual rate of photosynthetic organic-matter production in the surface ocean. The globally integrated ratio of radiolytic H2 production relative to photosynthetic primary production is 4.1E-4, based on electron equivalences. Although small relative to global photosynthetic biomass production, sediment-catalyzed production of radiolytic products is significant in the subseafloor. Our analysis of 9 sites in the N. Atlantic, N. and S. Pacific suggests that H2 is the primary microbial fuel in organic-poor sediment older than a few million years; at these sites, calculated

  16. A computational investigation of the interstitial flow induced by a variably thick blanket of very fine sand covering a coarse sand bed

    Science.gov (United States)

    Bartzke, Gerhard; Huhn, Katrin; Bryan, Karin R.

    2017-10-01

    Blanketed sediment beds can have different bed mobility characteristics relative to those of beds composed of uniform grain-size distribution. Most of the processes that affect bed mobility act in the direct vicinity of the bed or even within the bed itself. To simulate the general conditions of analogue experiments, a high-resolution three-dimensional numerical `flume tank' model was developed using a coupled finite difference method flow model and a discrete element method particle model. The method was applied to investigate the physical processes within blanketed sediment beds under the influence of varying flow velocities. Four suites of simulations, in which a matrix of uniform large grains (600 μm) was blanketed by variably thick layers of small particles (80 μm; blanket layer thickness approx. 80, 350, 500 and 700 μm), were carried out. All beds were subjected to five predefined flow velocities ( U 1-5=10-30 cm/s). The fluid profiles, relative particle distances and porosity changes within the bed were determined for each configuration. The data show that, as the thickness of the blanket layer increases, increasingly more small particles accumulate in the indentations between the larger particles closest to the surface. This results in decreased porosity and reduced flow into the bed. In addition, with increasing blanket layer thickness, an increasingly larger number of smaller particles are forced into the pore spaces between the larger particles, causing further reduction in porosity. This ultimately causes the interstitial flow, which would normally allow entrainment of particles in the deeper parts of the bed, to decrease to such an extent that the bed is stabilized.

  17. Determination of solid flow for bottom sediment drag of Parana river using tracer techniques

    International Nuclear Information System (INIS)

    Aoki, Pedro E.; Enokihara, Cyro T.; Rocca, Hector C.C.; Bittencourt, Andre V.L.

    1997-01-01

    Radioactive tracing technique with labeled sand was employed to evaluate the bottom sediment drag of Parana River, near Guaira City, State of Parana. 198 Au radioisotope was used and measurements have been performed for a period of fifteen days. A bed load rate of 914,8 t/day was obtained for a laminar layer of 0,33 mean thickness and 1,65 m/day mean velocity. (author). 5 refs., 7 figs., 3 tabs

  18. Sediment Transport

    DEFF Research Database (Denmark)

    Liu, Zhou

    Flow and sediment transport are important in relation to several engineering topics, e.g. erosion around structures, backfilling of dredged channels and nearshore morphological change. The purpose of the present book is to describe both the basic hydrodynamics and the basic sediment transport...... mechanics. Chapter 1 deals with fundamentals in fluid mechanics with emphasis on bed shear stress by currents, while chapter 3 discusses wave boundary layer theory. They are both written with a view to sediment transport. Sediment transport in rivers, cross-shore and longshore are dealt with in chapters 2......, 4 and 5, respectively. It is not the intention of the book to give a broad review of the literature on this very wide topic. The book tries to pick up information which is of engineering importance. An obstacle to the study of sedimentation is the scale effect in model tests. Whenever small...

  19. Geochronological framework of the early Paleozoic Bainaimiao Cu-Mo-Au deposit, NE China, and its tectonic implications

    Science.gov (United States)

    Zhou, Zhen-Hua; Mao, Jing-Wen; Ma, Xing-Hua; Che, He-Wei; Ou'yang, He-Gen; Gao, Xu

    2017-08-01

    The Bainaimiao Cu-Mo-Au deposit of NE China is an important ore deposit in the middle section of the northern margin of the North China Craton. The early Paleozoic Bainaimiao Group is the main ore-hosting rock. The mineralization at the deposit shows features of porphyry alteration and late-stage orogenesis and transformation. Zircon LA-ICP-MS U-Pb age data indicate that the ages of the Third and Fifth formations of the Bainaimiao Group are 492.7 ± 2.9 Ma (MSWD = 0.53) and 488.9 ± 3.1 Ma (MSWD = 0.92), respectively. The age of quartz diorite that intrudes the Bainaimiao Group is 459.3 ± 6.4 Ma (MSWD = 2.20). Molybdenite samples from massive Cu-Mo-bearing ores and quartz veins in the southern ore belt yield a Re-Os isochron age of 438.2 ± 2.7 Ma (MSWD = 0.16), which is consistent with the Re-Os isochron age of molybdenite in the northern ore belt, implying that the two ore belts belong to the same mineralization system. Muscovite from a post-magmatic Cu-Mo-bearing quartz-calcite vein yields an Ar-Ar isochron age of 422.5 ± 3.9 Ma (MSWD = 0.64) with an initial 40Ar/36Ar ratio of 286 ± 21. The well-defined plateau age of the muscovite is 422.4 ± 2.6 Ma (MSWD = 0.05), which represents the time of the post-magmatic orogenic transformation event. Based on our new age data and previous findings, we propose that the Bainaimiao Cu-Mo-Au deposit formed in an active continental margin setting and experienced four stages of ore mineralization: (1) a Late Cambrian-Middle Ordovician volcanic-sedimentary stage; (2) a Late Ordovician porphyry mineralization stage; (3) a Late Silurian regional metamorphism stage; and (4) an orogenic transformation stage. Subhedral and euhedral Paleoproterozoic (2402-1810 Ma) inherited zircons indicate that the Bainaimiao Group has a tectonic affinity with the North China Craton. The Central Asian Orogenic Belt, which is closely related to the complex closure of the Paleo-Asian Ocean, is favorable for prospecting for Paleozoic porphyry Cu

  20. Radioactive occurrence in sediments of Cenozoic age near Bandha village, Jaisalmer district, Rajasthan

    International Nuclear Information System (INIS)

    Gupta, Sumangal; Barik, Maninee P.; Ariketi, Ravinder; Jain, D.; Biswal, Samir

    2017-01-01

    The radioactivity is dependent on the isotope and their concentration in the mineral such as potassium (K), uranium (U) and thorium (Th). In this paper the presence of a 3 to 5 m thick uranium and thorium bearing sediment of Cenozoic age is reported above Goru Formation of Jaisalmer basin. Gamma ray log response of Well-1 which falls under the study area has marked with very high GR (gamma ray) readings ranging from 350-1488 API coupled with high uranium and thorium content from spectral gamma ray log ranging from 92-178 ppm and 60-80 ppm respectively at the depth of 50 m from ground surface (-110m above MSL). Further studies are required to delineate the lateral thickness variation for mining purpose which may be a radioactive source. (author)

  1. Dating of sediments and determination of sedimentation rate. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Illus, E [ed.

    1998-08-01

    The Second NKS (Nordic Nuclear Safety Research)/EKO-1 Seminar was held at the Finnish Centre for Radiation and Nuclear Safety (STUK) on April 2-3, 1997. The work of the NKS is based on 4-year programmes; the current programme having been planned for the years 1994-1997. The programme comprises 3 major fields, one of them being environmental effects (EKO). Under this umbrella there are 4 main projects. The EKO-1 project deals with marine radioecology, in particular bottom sediments and sediment processes. The programme of the second seminar consisted of 8 invited lecturers and 6 other scientific presentations. Dating of sediments and determination of sedimentation rate are important in all types of sedimentological study and model calculations of fluxes of substances in the aquatic environment. In many cases these tasks have been closely related to radioecological studies undertaken in marine and fresh water environments, because they are often based on measured depth profiles of certain natural or artificial radionuclides present in the sediments. During recent decades Pb-210 has proved to be very useful in dating of sediments, but some other radionuclides have also been successfully used, e.g. Pu-239,240, Am-241 and Cs-137. The difficulties existing and problems involved in dating of sediments, as well as solutions for resolving these problems are discussed in the presentations

  2. Dating of sediments and determination of sedimentation rate. Proceedings

    International Nuclear Information System (INIS)

    Illus, E.

    1998-01-01

    The Second NKS (Nordic Nuclear Safety Research)/EKO-1 Seminar was held at the Finnish Centre for Radiation and Nuclear Safety (STUK) on April 2-3, 1997. The work of the NKS is based on 4-year programmes; the current programme having been planned for the years 1994-1997. The programme comprises 3 major fields, one of them being environmental effects (EKO). Under this umbrella there are 4 main projects. The EKO-1 project deals with marine radioecology, in particular bottom sediments and sediment processes. The programme of the second seminar consisted of 8 invited lecturers and 6 other scientific presentations. Dating of sediments and determination of sedimentation rate are important in all types of sedimentological study and model calculations of fluxes of substances in the aquatic environment. In many cases these tasks have been closely related to radioecological studies undertaken in marine and fresh water environments, because they are often based on measured depth profiles of certain natural or artificial radionuclides present in the sediments. During recent decades Pb-210 has proved to be very useful in dating of sediments, but some other radionuclides have also been successfully used, e.g. Pu-239,240, Am-241 and Cs-137. The difficulties existing and problems involved in dating of sediments, as well as solutions for resolving these problems are discussed in the presentations

  3. Hawaii Regional Sediment Management (RSM): Regional Sediment Budget for the West Maui Region

    Science.gov (United States)

    2016-06-01

    ER D C/ CH L TR -1 6- 5 Regional Sediment Management (RSM) Program Hawaii Regional Sediment Management (RSM): Regional Sediment Budget...acwc.sdp.sirsi.net/client/default. Regional Sediment Management (RSM) Program ERDC/CHL TR-16-5 June 2016 Hawaii Regional Sediment Management...distribution is unlimited. Prepared for U.S. Army Corps of Engineers Washington, DC 20314-1000 Under Project 454632, “ Hawaii Regional Sediment Management

  4. Establishing a sediment budget in the newly created "Kleine Noordwaard" wetland area in the Rhine-Meuse delta

    Science.gov (United States)

    Christien van der Deijl, Eveline; van der Perk, Marcel; Middelkoop, Hans

    2018-03-01

    Many deltas are threatened by accelerated soil subsidence, sea-level rise, increasing river discharge, and sediment starvation. Effective delta restoration and effective river management require a thorough understanding of the mechanisms of sediment deposition, erosion, and their controls. Sediment dynamics has been studied at floodplains and marshes, but little is known about the sediment dynamics and budget of newly created wetlands. Here we take advantage of a recently opened tidal freshwater system to study both the mechanisms and controls of sediment deposition and erosion in newly created wetlands. We quantified both the magnitude and spatial patterns of sedimentation and erosion in a former polder area in which water and sediment have been reintroduced since 2008. Based on terrestrial and bathymetric elevation data, supplemented with field observations of the location and height of cut banks and the thickness of the newly deposited layer of sediment, we determined the sediment budget of the study area for the period 2008-2015. Deposition primarily took place in channels in the central part of the former polder area, whereas channels near the inlet and outlet of the area experienced considerable erosion. In the intertidal area, sand deposition especially takes place at low-lying locations close to the channels. Mud deposition typically occurs further away from the channels, but sediment is in general uniformly distributed over the intertidal area, due to the presence of topographic irregularities and micro-topographic flow paths. Marsh erosion does not significantly contribute to the total sediment budget, because wind wave formation is limited by the length of the fetch. Consecutive measurements of channel bathymetry show a decrease in erosion and deposition rates over time, but the overall results of this study indicate that the area functions as a sediment trap. The total contemporary sediment budget of the study area amounts to 35.7×103 m3 year-1, which

  5. Climatic and geologic controls on suspended sediment flux in the Sutlej River Valley, western Himalaya

    Directory of Open Access Journals (Sweden)

    H. Wulf

    2012-07-01

    Full Text Available The sediment flux through Himalayan rivers directly impacts water quality and is important for sustaining agriculture as well as maintaining drinking-water and hydropower generation. Despite the recent increase in demand for these resources, little is known about the triggers and sources of extreme sediment flux events, which lower water quality and account for extensive hydropower reservoir filling and turbine abrasion. Here, we present a comprehensive analysis of the spatiotemporal trends in suspended sediment flux based on daily data during the past decade (2001–2009 from four sites along the Sutlej River and from four of its main tributaries. In conjunction with satellite data depicting rainfall and snow cover, air temperature and earthquake records, and field observations, we infer climatic and geologic controls of peak suspended sediment concentration (SSC events. Our study identifies three key findings: First, peak SSC events (≥ 99th SSC percentile coincide frequently (57–80% with heavy rainstorms and account for about 30% of the suspended sediment flux in the semi-arid to arid interior of the orogen. Second, we observe an increase of suspended sediment flux from the Tibetan Plateau to the Himalayan Front at mean annual timescales. This sediment-flux gradient suggests that averaged, modern erosion in the western Himalaya is most pronounced at frontal regions, which are characterized by high monsoonal rainfall and thick soil cover. Third, in seven of eight catchments, we find an anticlockwise hysteresis loop of annual sediment flux variations with respect to river discharge, which appears to be related to enhanced glacial sediment evacuation during late summer. Our analysis emphasizes the importance of unconsolidated sediments in the high-elevation sector that can easily be mobilized by hydrometeorological events and higher glacial-meltwater contributions. In future climate change scenarios, including continuous glacial retreat and

  6. Upstream sediment input effects on experimental dune trough scour in sediment mixtures

    NARCIS (Netherlands)

    Kleinhans, M.G.

    2005-01-01

    Understanding causes of dune irregularity, especially dune trough scour, is important for the modeling of vertical sorting of sediment mixtures in morphological models of rivers with sediment mixtures. Sediment in dunes is generally sorted in a fining-upward manner, which affects the sediment

  7. Measurements of diffusive sublayer thicknesses in the ocean by alabaster dissolution, and their implications for the measurements of benthic fluxes

    Science.gov (United States)

    Santschi, Peter H.; Anderson, Robert F.; Fleisher, Martin Q.; Bowles, Walter

    1991-06-01

    Fluxes of reactive chemical species across the sediment-water interface can profoundly influence the dominant biogeochemical cycles in the worlds ocean. However, reliable in-situ measurements of benthic fluxes of many reactive species cannot be carried out without adjustment of stirring rates inside benthic flux chambers to match boundary layer conditions prevailing outside. A simple method to compare flow levels consists of measurements of gypsum dissolution rates inside benthic chambers and on the seafloor. The measurement of the diffusion-controlled dissolution rate of gypsum allows the estimation of the diffusive sublayer thickness and the time-averaged bottom stress on the seafloor. This method had previously been intercalibrated with the stress sensor method in flumes and inside benthic chambers. We describe here free-vehicle deployments of alabaster plates on the bottom of the ocean which gave results consistent with hydrodynamic theory. Errors in the calculated diffusive sublayer thicknesses were estimated to be about 10-15% for typical deployment conditions in the ocean. Current velocities 5 m off the bottom, which were measured concurrently during two deployments, allowed for comparisons with hydrodynamic predictions of diffusive sublayer thicknesses. The values obtained this way agreed within 15%. The measured mass transfer velocity was found to correlate with the plate dimension L, to the power of ⅓. This confirms the theoretical procedure for extrapolating to infinite plate size when calculating the sublayer impedance of solute fluxes from sediments (where L is large). Typical values of diffusive sublayer thicknesses, corrected to infinite plate size, were 1200 μm for current velocities, U100, of 2 cm s-1, and 500 μm at 8 cm s-1. Furthermore, values of friction velocities calculated from alabaster dissolution were compared with those using stress sensors. Gypsum plate values of u* were 0 and 30% lower than skin friction values of u*, at u* values

  8. Secondary environmental impacts of remedial alternatives for sediment contaminated with hydrophobic organic contaminants.

    Science.gov (United States)

    Choi, Yongju; Thompson, Jay M; Lin, Diana; Cho, Yeo-Myoung; Ismail, Niveen S; Hsieh, Ching-Hong; Luthy, Richard G

    2016-03-05

    This study evaluates secondary environmental impacts of various remedial alternatives for sediment contaminated with hydrophobic organic contaminants using life cycle assessment (LCA). Three alternatives including two conventional methods, dredge-and-fill and capping, and an innovative sediment treatment technique, in-situ activated carbon (AC) amendment, are compared for secondary environmental impacts by a case study for a site at Hunters Point Shipyard, San Francisco, CA. The LCA results show that capping generates substantially smaller impacts than dredge-and-fill and in-situ amendment using coal-based virgin AC. The secondary impacts from in-situ AC amendment can be reduced effectively by using recycled or wood-based virgin AC as production of these materials causes much smaller impacts than coal-based virgin AC. The secondary environmental impacts are highly sensitive to the dredged amount and the distance to a disposal site for dredging, the capping thickness and the distance to the cap materials for capping, and the AC dose for in-situ AC amendment. Based on the analysis, this study identifies strategies to minimize secondary impacts caused by different remediation activities: optimize the dredged amount, the capping thickness, or the AC dose by extensive site assessments, obtain source materials from local sites, and use recycled or bio-based AC. Copyright © 2015 Elsevier B.V. All rights reserved.

  9. Chemistry of marine sediments

    International Nuclear Information System (INIS)

    Yen, T.F.

    1977-01-01

    Some topics considered are as follows: characterization of sediments in the vicinity of offshore petroleum production; thermal alteration experiments on organic matter in recent marine sediments as a model for petroleum genesis; composition of polluted bottom sediments in Great Lakes harbors; distribution of heavy metals in sediment fractions; recent deposition of lead off the coast of southern California; release of trace constituents from sediments resuspended during dredging operations; and migration of chemical constituents in sediment-seawater interfaces

  10. Uranium distribution in Puerto Galera-San Teodoro, Northern Mindoro, Philippines

    International Nuclear Information System (INIS)

    Santos, G. Jr.; Seguis, J.E.

    1982-09-01

    Geochemical mapping of uranium in stream sediment with the use of delayed neutron activation analysis (DNAA) was conducted in northeastern Mindoro Island. Uranium was determined in stream sediments by means of an automated analysis system utilizing a neutron activation/delayed neutron counting technique. Stream sediments were collected at a density of less than one sample per 2 sq. km. A total of 428 samples were analyzed. The background and threshold uranium values were 2.6 ppm and 4.5 ppm, respectively. Three small anomalous localities were identified in areas underlain by Paleozoic (Carboniferous) Mindoro Metamorphics (undifferentiated schist and marble). Further exploration of these anomalous areas is warranted. (author)

  11. Orbital- to Sub-Orbital-Scale Cyclicity in Seismic Reflections and Sediment Character in Early to Middle Pleistocene Mudstone, Santa Barbara Basin, California

    Science.gov (United States)

    Peterson, C. D.; Behl, R. J.; Nicholson, C.; Lisiecki, L. E.; Sorlien, C. C.

    2009-12-01

    to shorter wavelengths midway through the section. Deep in the section, the strongest cycles indicated by spectral analysis are 50 and 16 meters thick, whereas up section, the strongest cycles are 20 and 12 meters thick. Nearby industry boreholes that penetrate a stratigraphically similar, 1500-meter-thick mudstone section, provide logs of natural gamma ray intensity with a higher sample interval (15 cm), allowing resolution and analysis of even higher frequency lithologic cycles. The strongest cycle deep in the section is 100 meters thick, and up section, the strongest cycle is 12 meters thick. This abrupt decrease in dominant cycle thickness midway through both the seismic and gamma ray records perhaps indicates a basin-wide shift in sedimentation. With improved chronostratigraphy based on Sr-isotope ratios and biostratigraphy, and comparison with paleoclimate proxy data, we will test if seismically resolved lithologic oscillations can be reliably interpreted as representing climatically driven Milankovitch cycles. This method may be used to evaluate the age and paleoceanographic potential of sedimentary strata before a coring vessel is deployed.

  12. Unraveling African plate structure from elevation, geoid and geology data: implications for the impact of mantle flow and sediment transfers on lithospheric deformation

    Science.gov (United States)

    Bajolet, Flora; Robert, Alexandra; Chardon, Dominique; Rouby, Delphine

    2017-04-01

    The aim of our project is to simulate the long-wavelength, flexural isostatic response of the African plate to sediment transfers due to Meso-Cenozoic erosion - deposition processes in order to extract the residual topography driven by mantle dynamics. The first step of our project consists in computing crustal and lithospheric thickness maps of the African plate considering its main geological components (cratons, mobile belts, basins, rifts and passive margins of various ages and strengths). In order to consider these heterogeneities, we compute a 2D distribution of crustal densities and thermal parameters from geological data and use it as an input of our modeling. We combine elevation and geoid anomaly data using a thermal analysis, following the method of Fullea et al. (2007) in order to map crustal and lithospheric thicknesses. In this approach, we assume local isostasy and consider a four-layer model made of crust and lithospheric mantle plus seawater and asthenosphere. In addition, we compare our results with crustal and lithospheric thickness datasets compiled from bibliography and existing global models. The obtained crustal thicknesses range from 28 to 42km, with the thickest crust confined to the northern part of the West African Craton, the Kaapvaal craton, and the Congo cuvette. The crust in the East African Rift appears unrealistically thick (40-45 km) as it is not isotatically compensated, highlighting the dynamic effect of the African superswell. The thinnest crust (28-34km) follows a central East-West trend coinciding with Cretaceous rifts and the Cameroon volcanic line. The lithosphere reaches 220 km beneath the Congo craton, but remains globally thin (ca. 120-180 km) compared to tomographic models and considering the age of most geological provinces. As for the crust, the thinnest lithosphere is located in areas of Cretaceous-Jurassic rifting, suggesting that the lithosphere did not thermally recover from Mesozoic rifting. A new elastic

  13. Evaluation of suspended sediment concentrations, sediment fluxes and sediment depositions along a reservoir by using laser diffraction and acoustic backscatter data

    Science.gov (United States)

    Lizano, Laura; Haun, Stefan

    2015-04-01

    The construction of dams and reservoirs disturb the natural morphological behavior of rivers. A natural settling effect occurs due to the reduced turbulences and flow velocities. As a consequence, reservoirs fill up with sediments which results in a reduction of storage volume, influences the operation of hydropower plants and leads in several cases to flood protection problems. The sediment depositions in reservoirs are standardly evaluated by using bathymetric data, obtained by a single beam sonar from pre-defined cross sections or by an extensive evaluation of the reservoir bed by a side scan sonar. However, a disadvantage of this method is that it is not possible to evaluate the pore water content of the depositions, which may lead as consequence to an uncertainty in the measured amount of deposited sediments. Given that a major part of sediments entering reservoirs are transported in suspension, sediment flux measurements along defined transects could give more reliable information on the settled amount of sediments and additional information on the sediment transport mechanism within the reservoir. An evaluation of the sediment fluxes is in practice often conducted by a single suspended sediment concentration (SSC) measurement in combination with a cross sectional calibration factor to take changes in the SSC along the transect into account. However, these calibration factors are often developed only for one specific in-situ condition and may give unreliable results in case that the boundaries change e.g. the hydraulic conditions. Hence an evaluation of the sediment fluxes along the whole transect would give a more reliable number for the amount of transported sediments through the reservoir. This information can afterwards be used to calculate the amount of settled sediments in different sections of the reservoir and the amount of sediments which will enter the intake. For this study the suspended sediment transport within the Peñas Blancas reservoir in

  14. Sediment traps with guiding channel and hybrid check dams improve controlled sediment retention

    Science.gov (United States)

    Schwindt, Sebastian; Franca, Mário J.; Reffo, Alessandro; Schleiss, Anton J.

    2018-03-01

    Sediment traps with partially open check dams are crucial elements for flood protection in alpine regions. The trapping of sediment is necessary when intense sediment transport occurs during floods that may endanger urban areas at downstream river reaches. In turn, the unwanted permanent trapping of sediment during small, non-hazardous floods can result in the ecological and morphological degradation of downstream reaches. This study experimentally analyses a novel concept for permeable sediment traps. For ensuring the sediment transfer up to small floods, a guiding channel implemented in the deposition area of a sediment trap was systematically studied. The bankfull discharge of the guiding channel corresponds to a dominant morphological discharge. At the downstream end of the guiding channel, a permeable barrier (check dam) triggers sediment retention and deposition. The permeable barrier consists of a bar screen for mechanical deposition control, superposed to a flow constriction for the hydraulic control. The barrier obstructs hazardous sediment transport for discharges that are higher than the bankfull discharge of the guiding channel without the risk of unwanted sediment flushing (massive self-cleaning).

  15. Anthropogenic sediments and soils of tells of the Balkans and Anatolia: Composition, genesis, and relationships with the history of landscape and human occupation

    Science.gov (United States)

    Sedov, S. N.; Aleksandrovskii, A. L.; Benz, M.; Balabina, V. I.; Mishina, T. N.; Shishkov, V. A.; Şahin, F.; Özkaya, V.

    2017-04-01

    Soils and sediments composing Tell Körtik Tepe (Epipaleolithic, Turkey) and Tell Yunatsite (Chalcolithic (Eneolithic), Bulgaria) have been studied with the aim to gain a better insight into their microfabrics, determine the composition of anthropogenic artifacts, and, on this basis, to analyze similarities and distinctions between these objects and the modern soils of urban areas. The methods of micromorphology, scanning electron microscopy with an energy dispersive X-ray microanalyzer, X-ray fluorometry, and other techniques to determine the chemical and physical properties of the soils and sediments have been applied. Two paleosols have been identified in Tell Yunatsite with a total thickness of 9 m: the paleosol buried under the tell and the paleosol in its middle part. Sediments of Tell Körtik Tepe have a total thickness of up to 5 m; their accumulation began at the end of Pleistocene over the surface of buried paleosol. The cultural layer of the tells consists of construction debris mainly represented by a mixture of clay and sand and of domestic wastes with the high content of phosphorus. The major source of phosphorus is calcium phosphate (apatite) of bone tissues. The abundance of various anthropogenic materials in the sediments is clearly seen in thin sections. Even in the paleosols developed within the cultural layer (the mid-profile paleosol in Tell Yunatsite), the amount of microinclusions of bone fragments, charcoal, and burnt clay (ceramics) is very high. Micromorphological data indicate that up to 50% of the layered material filling an Epipaleolithic construction in Tell Körtik Tepe consists of the anthropogenic inclusions: bone fragments, charcoal, etc. The features of pedogenic transformation are present in the sediments. Such sediments can be classified as synlithogenic soils similar to the modern Urbic Technosols. It is shown that the formation of paleosols and sediments of Tell Körtik Tepe took place under extreme environmental conditions

  16. Investigation of Composition of Particle Size in Sediments of Stormwater Sedimentation Tank

    OpenAIRE

    Daiva Laučytė; Regimantas Dauknys

    2011-01-01

    The main object for the storm water runoff treatment is to remove suspended solids before the storm water runoff is discharged into surface waters. Therefore the sedimentation tank is the most often used treatment facility. In order to optimise the sedimentation, the tendency of particle size distribution in bottom sediments must be known. Two similar size storm water runoff sedimentation tanks in Vilnius city were selected for the analysis of the particle size distribution in sediments. The ...

  17. Sedimentation

    Science.gov (United States)

    Cliff R. Hupp; Michael R. Schening

    2000-01-01

    Sedimentation is arguably the most important water-quality concern in the United States. Sediment trapping is cited frequently as a major function of riverine-forested wetlands, yet little is known about sedimcntation rates at the landscape scale in relation to site parameters, including woody vegetation type, elevation, velocity, and hydraulic connection to the river...

  18. Les séries paléozoïques d'Afrique: une approche

    Science.gov (United States)

    Fabre, Jean

    The major part of the Gondwanan history of Africa took place during Paleozoic times. One can point out in the sedimentary record: the deposition of the molasses of the Pan-African chains and their pediplanation during the Cambrian; the relics of lithospheric anomalies remaining after the Pan-African event, expressed by epeirogenic swells, particularly in Central Africa and by the reactivation of Pan-African faults especially in the submeridian system in Central Sahara—these pre-existing structures control to large extent the sedimentation from the Lower Ordovician to Lower Devonian, the sands being transported towards the northern and southern margins of the continent; the Upper Paleozoic and Lower Mesozoic sedimentation occurs in a new tectonic environment related to the Variscan and Autrichian events which at least in the North are controlles by plate movements preceding and contemporaneous to the opening of Central Atlantic and Ligurian Tethys; the sedimentation is also strongly influenced by the climatic variations on a huge peneplaned supercontinent, accompanying polar wandering from the NW to the SE of Africa—the first Late Ordovician inlandsis centred in NW Africa cover a large part of the continent. The second extensive Permo-Carboniferous glaciation centred in southern Africa set off arid and semi-arid conditions in the north; the worldwide eustatic changes are indicated by large scale transgressions and regressions on the relatively stable Saharan platform whereas continuous marine sedimentation occured along the mobile northern and southern margins of the continent.

  19. Multi-property characterization chamber for geophysical-hydrological investigations of hydrate bearing sediments

    Energy Technology Data Exchange (ETDEWEB)

    Seol, Yongkoo, E-mail: Yongkoo.Seol@netl.doe.gov; Choi, Jeong-Hoon; Dai, Sheng [National Energy Technology Laboratory, U.S. Department of Energy, Morgantown, West Virginia 26507 (United States)

    2014-08-01

    With the increase in the interest of producing natural gas from methane hydrates as well as potential risks of massive hydrate dissociation in the context of global warming, studies have recently shifted from pure hydrate crystals to hydrates in sediments. Such a research focus shift requires a series of innovative laboratory devices that are capable of investigating various properties of hydrate-bearing sediments (HBS). This study introduces a newly developed high pressure testing chamber, i.e., multi-property characterization chamber (MPCC), that allows simultaneous investigation of a series of fundamental properties of HBS, including small-strain stiffness (i.e., P- and S-waves), shear strength, large-strain deformation, stress-volume responses, and permeability. The peripheral coolant circulation system of the MPCC permits stable and accurate temperature control, while the core holder body, made of aluminum, enables X-ray computer tomography scanning to be easily employed for structural and morphological characterization of specimens. Samples of hydrate-bearing sediments are held within a rubber sleeve inside the chamber. The thick sleeve is more durable and versatile than thin membranes while also being much softer than oedometer-type chambers that are incapable of enabling flow tests. Bias introduced by the rubber sleeve during large deformation tests are also calibrated both theoretically and experimentally. This system provides insight into full characterization of hydrate-bearing sediments in the laboratory, as well as pressure core technology in the field.

  20. Multi-property characterization chamber for geophysical-hydrological investigations of hydrate bearing sediments

    International Nuclear Information System (INIS)

    Seol, Yongkoo; Choi, Jeong-Hoon; Dai, Sheng

    2014-01-01

    With the increase in the interest of producing natural gas from methane hydrates as well as potential risks of massive hydrate dissociation in the context of global warming, studies have recently shifted from pure hydrate crystals to hydrates in sediments. Such a research focus shift requires a series of innovative laboratory devices that are capable of investigating various properties of hydrate-bearing sediments (HBS). This study introduces a newly developed high pressure testing chamber, i.e., multi-property characterization chamber (MPCC), that allows simultaneous investigation of a series of fundamental properties of HBS, including small-strain stiffness (i.e., P- and S-waves), shear strength, large-strain deformation, stress-volume responses, and permeability. The peripheral coolant circulation system of the MPCC permits stable and accurate temperature control, while the core holder body, made of aluminum, enables X-ray computer tomography scanning to be easily employed for structural and morphological characterization of specimens. Samples of hydrate-bearing sediments are held within a rubber sleeve inside the chamber. The thick sleeve is more durable and versatile than thin membranes while also being much softer than oedometer-type chambers that are incapable of enabling flow tests. Bias introduced by the rubber sleeve during large deformation tests are also calibrated both theoretically and experimentally. This system provides insight into full characterization of hydrate-bearing sediments in the laboratory, as well as pressure core technology in the field

  1. Investigation of Composition of Particle Size in Sediments of Stormwater Sedimentation Tank

    Directory of Open Access Journals (Sweden)

    Daiva Laučytė

    2011-04-01

    Full Text Available The main object for the storm water runoff treatment is to remove suspended solids before the storm water runoff is discharged into surface waters. Therefore the sedimentation tank is the most often used treatment facility. In order to optimise the sedimentation, the tendency of particle size distribution in bottom sediments must be known. Two similar size storm water runoff sedimentation tanks in Vilnius city were selected for the analysis of the particle size distribution in sediments. The composite samples of drained storm water runoff sediments were collected at the sedimentation tanks located in the districts of Verkiai and Karoliniskes on the 2nd of June, 2008. The analyses of grain size distribution were performed according the standard ISO/TS 17892-4:2004. The results showed that the particles with the particle size of 1–2 mm were obtained up to 10 m from the inlet and the particles with the size of 0,01–0,05 mm mainly were obtained close to the outlet of sedimentation tank. It is recommended to divide the sedimentation tank in two parts in order to get proper management of sediments: the particles that size is 1–10 mm could be managed as waste from grit chambers and particles of smaller size could be managed as primary sludge.Article in Lithuanian

  2. Importance of measuring discharge and sediment transport in lesser tributaries when closing sediment budgets

    Science.gov (United States)

    Griffiths, Ronald E.; Topping, David J.

    2017-11-01

    Sediment budgets are an important tool for understanding how riverine ecosystems respond to perturbations. Changes in the quantity and grain size distribution of sediment within river systems affect the channel morphology and related habitat resources. It is therefore important for resource managers to know if a river reach is in a state of sediment accumulation, deficit or stasis. Many sediment-budget studies have estimated the sediment loads of ungaged tributaries using regional sediment-yield equations or other similar techniques. While these approaches may be valid in regions where rainfall and geology are uniform over large areas, use of sediment-yield equations may lead to poor estimations of loads in regions where rainfall events, contributing geology, and vegetation have large spatial and/or temporal variability. Previous estimates of the combined mean-annual sediment load of all ungaged tributaries to the Colorado River downstream from Glen Canyon Dam vary by over a factor of three; this range in estimated sediment loads has resulted in different researchers reaching opposite conclusions on the sign (accumulation or deficit) of the sediment budget for particular reaches of the Colorado River. To better evaluate the supply of fine sediment (sand, silt, and clay) from these tributaries to the Colorado River, eight gages were established on previously ungaged tributaries in Glen, Marble, and Grand canyons. Results from this sediment-monitoring network show that previous estimates of the annual sediment loads of these tributaries were too high and that the sediment budget for the Colorado River below Glen Canyon Dam is more negative than previously calculated by most researchers. As a result of locally intense rainfall events with footprints smaller than the receiving basin, floods from a single tributary in semi-arid regions can have large (≥ 10 ×) differences in sediment concentrations between equal magnitude flows. Because sediment loads do not

  3. Quantification and dating of floodplain sedimentation in a medium-sized catchment of the German uplands: a case study from the Aar Valley in the southern Rhenish Massif, Germany

    Directory of Open Access Journals (Sweden)

    Stolz, Christian

    2013-09-01

    Full Text Available The distribution, thickness and composition of the floodplain sediments in the valleys of the Aar and its tributaries (Taunus Mountains were investigated by way of extensive fieldwork at 25 locations. In the entire catchment area, 48.8 million tons of loamy f loodplain fines could be assessed. Most of these were deposited since late medieval times due to extensive historical land use and forest clearing, especially in the mining region along the middle course of the Aar. In its lower course, the enhanced sedimentation of loamy f loodplain sediments started during the Bronze Age.

  4. Paleozoic magmatism and porphyry Cu-mineralization in an evolving tectonic setting in the North Qilian Orogenic Belt, NW China

    Science.gov (United States)

    Qiu, Kun-Feng; Deng, Jun; Taylor, Ryan D.; Song, Kai-Rui; Song, Yao-Hui; Li, Quan-Zhong; Goldfarb, Richard J.

    2016-01-01

    The NWW-striking North Qilian Orogenic Belt records the Paleozoic accretion–collision processes in NW China, and hosts Paleozoic Cu–Pb–Zn mineralization that was temporally and spatially related to the closure of the Paleo Qilian-Qinling Ocean. The Wangdian Cu deposit is located in the eastern part of the North Qilian Orogenic Belt, NW China. Copper mineralization is spatially associated with an altered early Paleozoic porphyritic granodiorite, which intruded tonalites and volcaniclastic rocks. Alteration zones surrounding the mineralization progress outward from a potassic to a feldspar-destructive phyllic assemblage. Mineralization consists mainly of quartz-sulfide stockworks and disseminated sulfides, with ore minerals chalcopyrite, pyrite, molybdenite, and minor galena and sphalerite. Gangue minerals include quartz, orthoclase, biotite, sericite, and K-feldspar. Zircon LA-ICPMS U–Pb dating of the ore-bearing porphyritic granodiorite yielded a mean 206Pb/238U age of 444.6 ± 7.8 Ma, with a group of inherited zircons yielding a mean U–Pb age of 485 ± 12 Ma, consistent with the emplacement age (485.3 ± 6.2 Ma) of the barren precursor tonalite. Rhenium and osmium analyses of molybdenite grains returned model ages of 442.9 ± 6.8 Ma and 443.3 ± 6.2 Ma, indicating mineralization was coeval with the emplacement of the host porphyritic granodiorite. Rhenium concentrations in molybdenite (208.9–213.2 ppm) suggest a mantle Re source. The tonalities are medium-K calc-alkaline. They are characterized by enrichment of light rare-earth elements (LREEs) and large-ion lithophile elements (LILEs), depletion of heavy rare-earth elements (HREEs) and high-field-strength elements (HFSEs), and minor negative Eu anomalies. They have εHf(t) values in the range of +3.6 to +11.1, with two-stage Hf model ages of 0.67–1.13 Ga, suggesting that the ca. 485 Ma barren tonalites were products of arc magmatism incorporating melts from the mantle wedge and

  5. Potentiality if Rb-Sr method for dating the argillous sedimentary rocks

    International Nuclear Information System (INIS)

    Thomaz Filho, A.

    1976-01-01

    The potentiality of application Rb-Sr method in argillous sediments, using samples from paleozoic and mesozoic formation in brazilian sedimentaries basin was tested. Physical, chemistry and isotopic analysis of thirty eight samples were made in the laboratories of geochronology Research Center from the University of Sao Paulo. Four isochronic diagrams for the argillous sedimentary rocks were also proposed. (author)

  6. Sediment Resuspension and Deposition on Seagrass Leaves Impedes Internal Plant Aeration and Promotes Phytotoxic H2S Intrusion

    Directory of Open Access Journals (Sweden)

    Kasper E. Brodersen

    2017-05-01

    Full Text Available HIGHLIGHTS:Sedimentation of fine sediment particles onto seagrass leaves severely hampers the plants' performance in both light and darkness, due to inadequate internal plant aeration and intrusion of phytotoxic H2S.Anthropogenic activities leading to sediment re-suspension can have adverse effects on adjacent seagrass meadows, owing to reduced light availability and the settling of suspended particles onto seagrass leaves potentially impeding gas exchange with the surrounding water. We used microsensors to determine O2 fluxes and diffusive boundary layer (DBL thickness on leaves of the seagrass Zostera muelleri with and without fine sediment particles, and combined these laboratory measurements with in situ microsensor measurements of tissue O2 and H2S concentrations. Net photosynthesis rates in leaves with fine sediment particles were down to ~20% of controls without particles, and the compensation photon irradiance increased from a span of 20–53 to 109–145 μmol photons m−2 s−1. An ~2.5-fold thicker DBL around leaves with fine sediment particles impeded O2 influx into the leaves during darkness. In situ leaf meristematic O2 concentrations of plants exposed to fine sediment particles were lower than in control plants and exhibited long time periods of complete meristematic anoxia during night-time. Insufficient internal aeration resulted in H2S intrusion into the leaf meristematic tissues when exposed to sediment resuspension even at relatively high night-time water-column O2 concentrations. Fine sediment particles that settle on seagrass leaves thus negatively affect internal tissue aeration and thereby the plants' resilience against H2S intrusion.

  7. Syndepositional tectonics recorded by soft-sediment deformation and liquefaction structures (continental Lower Permian sediments, Southern Alps, Northern Italy): Stratigraphic significance

    Science.gov (United States)

    Berra, F.; Felletti, F.

    2011-04-01

    The Lower Permian succession of the Central Southern Alps (Lombardy, Northern Italy) was deposited in fault-controlled continental basins, probably related to transtensional tectonics. We focussed our study on the stratigraphic record of the Lower Permian Orobic Basin, which consists of a 1000 m thick succession of prevailing continental clastics with intercalations of ignimbritic flows and tuffs (Pizzo del Diavolo Formation, PDV) resting on the underlying prevailing pyroclastic flows of the Cabianca Volcanite. The PDV consists of a lower part (composed of conglomerates passing laterally to sandstones and distally to silt and shales), a middle part (pelitic, with carbonates) and an upper part (alternating sandstone, silt and volcanic flows). Syndepositional tectonics during the deposition of the PDV is recorded by facies distribution, thickness changes and by the presence of deformation and liquefaction structures interpreted as seismites. Deformation is recorded by both ductile structures (ball-and-pillow, plastic intrusion, disturbed lamination, convolute stratification and slumps) and brittle structures (sand dykes and autoclastic breccias). Both the sedimentological features and the geodynamic setting of the depositional basin confidently support the interpretation of the described deformation features as related to seismic shocks. The most significant seismically-induced deformation is represented by a slumped horizon (about 4 m thick on average) which can be followed laterally for more than 5 km. The slumped bed consists of playa-lake deposits (alternating pelites and microbial carbonates, associated with mud cracks and vertebrate tracks). The lateral continuity and the evidence of deposition on a very low-angle surface along with the deformation/liquefaction of the sediments suggest that the slump was triggered by a high-magnitude earthquake. The stratigraphic distribution of the seismites allows us to identify time intervals of intense seismic activity

  8. Metal and trace elements assessment in sediments of Kakinada Bay, East Coast India, by INAA and PIXE

    International Nuclear Information System (INIS)

    Dasari, K.B.; Ratna Raju, M.; Lakshminarayana, S.; Naidu, T.Y.; Raju, V.S.

    2012-01-01

    Aquatic sediment is more homogeneous in grain-size (< 0.06 mm) distribution, and the fine particles are more capable of adsorbing pollutants than coarser fractions. Aquatic mediums are the receipt of the liquid effluents of the variety of industries, atmosphere changes and anthropogenic processes. Godavari river is one of the most important rivers in India and which is adjoining coast into the Bay of Bengal near Kakinada. The study area viz. Kakinada Bay (Godavari delta) rich in industries, appears to be fragile with thick pile of sediments dipping towards sea and underlain by faults. Hence any change in existing equilibrium would affect aquatic ecosystem. The objective of this study is to quantify the amount of trace, heavy metals ions present in sediments collected from Kakinada Bay, Andhra Pradesh, India. Five sites were selected along the coastal area covering the important potential pollutions sources at Godavari delta. Instrumental neutron activation analysis and particle induced X-ray emission techniques were carried out for trace and some metals determination

  9. Structure of the surface of the Paleozoic basement of the cis-Kopetdag trough in connection with the oil and gas content of the sedimentary cover

    Energy Technology Data Exchange (ETDEWEB)

    Odekov, O.A.; Mel' nik, N.M.; Tulaeva, S.V.

    1981-01-01

    Use of a complex of different methods permitted a new approach to the study of the nature of the surface of the Paleozoic basement. As a result of constructing models of the deep structure of the cis-Kopetdag trough and the Bakhardok monocline a new map of the major tectonic elements of the region has been developed and a map of the surface structure of the Paleozoic basement and a map of the Moho discontinuity have been compiled. The former gives a major new solution to many problems of the dep structure of the region: 1) in the zone of juncture of the cis-Kopetdag trough and the Bakhardok monocline a new positive structural element has been identified, called the Bakhardok-Kumbet buried superarch; 2) a completely new morphology of the western part of the Serakh connector has been given, within which two independent buried arches are identified, the Shatlyk and Tedzhenskii; 3) it has been established that the Izgantskii arch of the sedimentary cover corresponds to the Izgant uplifted block of the basement. These structural elements are described, methods for identifying them are outlined, and some principles of the variatin of the parameters of the geophysical fields are described. The prospects for the juncture zone are estimated as fairly high from the viewpoint of discovering different types of oil and gas deposits in the widest stratigraphic interval, from the Lower Jurassic to the Neokomian.

  10. Yucatan Subsurface Stratigraphy from Geophysical Data, Well Logs and Core Analyses in the Chicxulub Impact Crater and Implications for Target Heterogeneities

    Science.gov (United States)

    Canales, I.; Fucugauchi, J. U.; Perez-Cruz, L. L.; Camargo, A. Z.; Perez-Cruz, G.

    2011-12-01

    Asymmetries in the geophysical signature of Chicxulub crater are being evaluated to investigate on effects of impact angle and trajectory and pre-existing target structural controls for final crater form. Early studies interpreted asymmetries in the gravity anomaly in the offshore sector to propose oblique either northwest- and northeast-directed trajectories. An oblique impact was correlated to the global ejecta distribution and enhanced environmental disturbance. In contrast, recent studies using marine seismic data and computer modeling have shown that crater asymmetries correlate with pre-existing undulations of the Cretaceous continental shelf, suggesting a structural control of target heterogeneities. Documentation of Yucatan subsurface stratigraphy has been limited by lack of outcrops of pre-Paleogene rocks. The extensive cover of platform carbonate rocks has not been affected by faulting or deformation and with no rivers cutting the carbonates, information comes mainly from the drilling programs and geophysical surveys. Here we revisit the subsurface stratigraphy in the crater area from the well log data and cores retrieved in the drilling projects and marine seismic reflection profiles. Other source of information being exploited comes from the impact breccias, which contain a sampling of disrupted target sequences, including crystalline basement and Mesozoic sediments. We analyze gravity and seismic data from the various exploration surveys, including multiple Pemex profiles in the platform and the Chicxulub experiments. Analyses of well log data and seismic profiles identify contacts for Lower Cretaceous, Cretaceous/Jurassic and K/Pg boundaries. Results show that the Cretaceous continental shelf was shallower on the south and southwest than on the east, with emerged areas in Quintana Roo and Belize. Mesozoic and upper Paleozoic sediments show variable thickness, possibly reflecting the crystalline basement regional structure. Paleozoic and Precambrian

  11. Tracking the 10Be-26Al source-area signal in sediment-routing systems of arid central Australia

    Science.gov (United States)

    Struck, Martin; Jansen, John D.; Fujioka, Toshiyuki; Codilean, Alexandru T.; Fink, David; Fülöp, Réka-Hajnalka; Wilcken, Klaus M.; Price, David M.; Kotevski, Steven; Fifield, L. Keith; Chappell, John

    2018-05-01

    Sediment-routing systems continuously transfer information and mass from eroding source areas to depositional sinks. Understanding how these systems alter environmental signals is critical when it comes to inferring source-area properties from the sedimentary record. We measure cosmogenic 10Be and 26Al along three large sediment-routing systems ( ˜ 100 000 km2) in central Australia with the aim of tracking downstream variations in 10Be-26Al inventories and identifying the factors responsible for these variations. By comparing 56 new cosmogenic 10Be and 26Al measurements in stream sediments with matching data (n = 55) from source areas, we show that 10Be-26Al inventories in hillslope bedrock and soils set the benchmark for relative downstream modifications. Lithology is the primary determinant of erosion-rate variations in source areas and despite sediment mixing over hundreds of kilometres downstream, a distinct lithological signal is retained. Post-orogenic ranges yield catchment erosion rates of ˜ 6-11 m Myr-1 and silcrete-dominant areas erode as slow as ˜ 0.2 m Myr-1. 10Be-26Al inventories in stream sediments indicate that cumulative-burial terms increase downstream to mostly ˜ 400-800 kyr and up to ˜ 1.1 Myr. The magnitude of the burial signal correlates with increasing sediment cover downstream and reflects assimilation from storages with long exposure histories, such as alluvial fans, desert pavements, alluvial plains, and aeolian dunes. We propose that the tendency for large alluvial rivers to mask their 10Be-26Al source-area signal differs according to geomorphic setting. Signal preservation is favoured by (i) high sediment supply rates, (ii) high mean runoff, and (iii) a thick sedimentary basin pile. Conversely, signal masking prevails in landscapes of (i) low sediment supply and (ii) juxtaposition of sediment storages with notably different exposure histories.

  12. Aerial gamma ray and magnetic survey: Kansas City Quadrangle of Kansas and Missouri. Final report

    International Nuclear Information System (INIS)

    1980-11-01

    The Kansas City quadrangle covers approximately 7400 square miles in northwestern Missouri and northeastern Kansas. It overlies the southeastern edge of the Forest City Basin, which contains predominantly Paleozoic sediments. Permian and Pennsylvanian formations cover much of the surface, but Quaternary sedimentation dominates certain regions of the quadrangle. A search of available literature revealed no known uranium deposits. A total of 102 uranium anomalies were detected and are discussed briefly. None were considered significant and all appear to be related to cultural features. Magnetic data appears to correlate directly with underlying Precambrian material

  13. Sediments Of The Moon And Earth As End-Members For Comparative Planetology

    Science.gov (United States)

    Basu, Abhijit; Molinaroli, Emanuela

    Processes of production, transport, deposition, lithification, and preservation of sediments of the Moon and Earth are extremely different. The differences arise primarily from the dissimilarity in the origins and sizes of the Moon and Earth. The consequence is that the Moon does not have an atmosphere, a hydrosphere (the Moon is totally dry), a biosphere (the Moon is totally life-less), a magnetosphere, and any tectonic force. Pristine rocks on the exposed surface of the Moon are principally anorthositic and basaltic, but those on the Earth are granitic (discounting suboceanic rocks). Sediments on these two bodies probably represent two end-members on rocky planetary bodies. Sediments on other rocky planetary bodies (atmosphere-free Mercury and asteroids, Venus with a thick atmosphere but possibly no water on its surface, and Mars with a currently dry surface sculptured by running water in the past) are intermediate in character. New evidence suggests that characteristics of Martian sediments may be in-between those of the Moon and Earth. For example, impacts generate most Martian sediments as on the Moon, and, Martian sediments are wind-blown to form dunes as on Earth. A comparative understanding of sediments of the Moon and Earth helps us anticipate and interpret the sedimentary record of other planetary bodies. Impact processes, large and small, have produced the sediments of the Moon. Unlike Earth, the surface of the Moon is continuously bombarded by micrometeorites and solar wind. Processes of chemical and mechanical weathering aided by biological activity produce sediments on Earth, fixing a significant amount of carbon in the solid state. Whereas solar wind produces minor chemical changes in lunar sediments, chemical weathering significantly alters and affects the character of Earth sediments. Primarily ballistic and electrostatic forces transport lunar sediments but Earth sediments are transported by air, water, and ice. Whereas Earth sediments accumulate

  14. Site-specific sediment clean-up objectives developed by the sediment quality triad

    International Nuclear Information System (INIS)

    Redman, S.; Janisch, T.

    1995-01-01

    Sediment chemistry, sediment toxicity, and benthic macroinvertebrate community data were collected and evaluated in concert (1) to characterize adverse effects of hydrocarbon and metal contaminants in the sediments of a small inlet of Superior Bay, Lake Superior and a tributary creek and (2) to derive numeric objectives for the clean up of this system. Sediments from reference locations and eight study sites were analyzed for a range of contaminants, including hydrocarbons (measured both as diesel range organics (DRO) and oil and grease), lead, chromium, and ammonia. A range of sediment toxicity was observed across the eight study sites using a variety of tests and endpoints: Hyalella azteca (10 day survival and growth), Chironomus tentans (10 day survival and growth), Ceriodaphnia dubia (48 hour survival), and Daphnia magna (48 hour survival and 10 day survival and reproduction). A range of alterations of the benthic macroinvertebrate community compared with communities from reference locations were observed. Benthic community alterations were summarized quantitatively by taxa richness and Shannon-Weiner mean diversity. Lowest effect levels determined through this study included 150 microg/g dry sediment for DRO (as measured in this study) and 40 microg/g dry sediment for lead. Effects thresholds determined through this study included 1,500 microg/g dry sediment for DRO and 90 microg/g dry sediment for lead. These levels and concentrations measured in relevant reference locations are being used to define objectives for sediment clean up in the inlet and creek

  15. Human-induced erosion and sedimentation during the Holocene in the central Ebro depression, Spain

    International Nuclear Information System (INIS)

    Constante, A.; Pena-Monne, J. L.

    2009-01-01

    Small secondary valleys in the Central Ebro Depression in northeast Spain have tended to be infield with sediment, and record a complex sequence of accumulations and incisions of Holocebe age. Level N3, the main accumulation level based on extent and depth, is characterized by a long period of sedimentation (from the Late Epipaleolithic to the end of the Late Roman period), the dominance of gypsiferous silt resulting from hill slope erosion, and a thickness up to 15 m. This deposit does not connect directly to the fluvial terraces of the Ebro River, and it accumulated over a long period of climate fluctuations. Thus, its evolution appears to have been largely independent of climate variability, but is closely related to human activities (deforestation, forest fires, farming development), particularly those associated with the main human settlements. (Author) 8 refs.

  16. Human-induced erosion and sedimentation during the Holocene in the central Ebro depression, Spain

    Energy Technology Data Exchange (ETDEWEB)

    Constante, A.; Pena-Monne, J. L.

    2009-07-01

    Small secondary valleys in the Central Ebro Depression in northeast Spain have tended to be infield with sediment, and record a complex sequence of accumulations and incisions of Holocebe age. Level N3, the main accumulation level based on extent and depth, is characterized by a long period of sedimentation (from the Late Epipaleolithic to the end of the Late Roman period), the dominance of gypsiferous silt resulting from hill slope erosion, and a thickness up to 15 m. This deposit does not connect directly to the fluvial terraces of the Ebro River, and it accumulated over a long period of climate fluctuations. Thus, its evolution appears to have been largely independent of climate variability, but is closely related to human activities (deforestation, forest fires, farming development), particularly those associated with the main human settlements. (Author) 8 refs.

  17. An early Brunhes (age for the Lower Paleolithic tool-bearing Kozarnika cave sediments, Bulgaria

    Science.gov (United States)

    Muttoni, Giovanni; Sirakov, Nikolas; Guadelli, Jean-Luc; Kent, Dennis V.; Scardia, Giancarlo; Monesi, Edoardo; Zerboni, Andrea; Ferrara, Enzo

    2017-12-01

    We present a new sedimentological profile and a magnetostratigraphy of the tool-bearing Kozarnika cave sediments from Bulgaria. Modal analysis of cave infilling sedimentary texture indicates that the tool-bearing layers contain a sizable fraction of sediment interpreted as loess. We also find evidence for a relatively thick and well defined normal magnetic polarity in the upper-middle part of the section interpreted as a record of the Brunhes Chron, followed down-section by reverse polarity directions interpreted as a record of the Matuyama Chron. The lowermost levels with Lower Paleolithic tools (Layers 13a-c) lie in the early Brunhes at a nominal maximum age of ∼0.75 Ma, while the Brunhes-Matuyama boundary (0.78 Ma) falls in Layer 13 Lower immediately below. This finding represents a conspicuous revision of previous age estimates for the same tool-bearing layers.

  18. USGS environmental characterization of flood sediments left in the New Orleans area after Hurricanes Katrina and Rita, 2005--Progress Report

    Science.gov (United States)

    Plumlee, Geoffrey S.; Meeker, Gregory P.; Lovelace, John K.; Rosenbauer, Robert J.; Lamothe, Paul J.; Furlong, Edward T.; Demas, Charles R.

    2006-01-01

    Introduction: The flooding in the greater New Orleans area that resulted from Hurricanes Katrina and Rita in September, 2005, left behind accumulations of sediments up to many centimeters thick on streets, lawns, parking lots, and other flat surfaces. These flood sediment deposits have been the focus of extensive study by the US Environmental Protection Agency (EPA) and Louisiana Department of Environmental Quality (LDEQ) due to concerns that the sediments may contain elevated levels of heavy metals, organic contaminants, and microbes. The U.S. Geological Survey (USGS) is characterizing a limited number of flood sediment samples that were collected on September 15-16 and October 6-7, 2005, from the greater New Orleans area by personnel from the USGS Louisiana Water Science Center in Baton Rouge. Small samples (< 3 pints each) of wet to dry flood sediment were collected from 11 localities around downtown New Orleans on September 15, 2005, and two large samples (40 pints each) of wet flood sediment were collected from the Chalmette area on September 16. Twelve additional samples (8-10 pints each) were collected from New Orleans, Slidell, Rigolets, and Violet on October 6 and 7. The USGS characterization studies of these flood sediments are designed to produce data and interpretations regarding how the sediments and any contained contaminants may respond to environmental processes. This information will be of use to cleanup managers and DoI/USGS scientists assessing environmental impacts of the hurricanes and subsequent cleanup activities.

  19. Preliminary characteristics of laminations in recent sediments from lakes Kamenduł and Perty in the Suwałki Landscape Park, northeastern Poland

    Directory of Open Access Journals (Sweden)

    Tylmann Wojciech

    2016-12-01

    Full Text Available Varved lake sediments are well known archives used for paleoenvironmental reconstructions. They provide continuous, high-resolution and calendar-year chronologies of past environmental changes. From lakes Kamenduł and Perty, located in the Suwałki Landscape Park, short cores of laminated sediments were collected and investigated using microfacies analysis and X-ray fluorescence (XRF scanning. Sediments of Lake Kamenduł form biogenic (calcite varves with pale lamina containing precipitated calcite and dark lamina composed of mixed organic and clastic material. There is a visible difference between varves in the lower and the topmost part of the core. The varve thickness and clastic material content decrease upcore. Analysed sediments of Lake Perty also show laminated structures which are biogenic varves composed of calcite laminas interbedded with layers of mixed material and dark laminas containing mostly organic material with some clastic particles. Our study shows that further analysis of sediments from these lakes may provide valuable information about past land use changes in their catchments as well as changes in the water column, i.e. mixing regimes and redox conditions.

  20. Relationship between soft stratum thickness and predominant frequency of ground based on microtremor observation data

    Science.gov (United States)

    Chia, Kenny; Lau, Tze Liang

    2017-07-01

    Despite categorized as low seismicity group, until being affected by distant earthquake ground motion from Sumatra and the recent 2015 Sabah Earthquake, Malaysia has come to realize that seismic hazard in the country is real and has the potential to threaten the public safety and welfare. The major concern in this paper is to study the effect of local site condition, where it could amplify the magnitude of ground vibration at sites. The aim for this study is to correlate the thickness of soft stratum with the predominant frequency of soil. Single point microtremor measurements were carried out at 24 selected points where the site investigation reports are available. Predominant period and frequency at each site are determined by Nakamura's method. The predominant period varies from 0.22 s to 0.98 s. Generally, the predominant period increases when getting closer to the shoreline which has thicker sediments. As far as the thickness of the soft stratum could influence the amplification of seismic wave, the advancement of micotremor observation to predict the thickness of soft stratum (h) from predominant frequency (fr) is of the concern. Thus an empirical relationship h =54.917 fr-1.314 is developed based on the microtremor observation data. The empirical relationship will be benefited in the prediction of thickness of soft stratum based on microtremor observation for seismic design with minimal cost compared to conventional boring method.

  1. Benchscale Assessment of the Efficacy of a Reactive Core Mat to Isolate PAH-spiked Aquatic Sediments.

    Science.gov (United States)

    Meric, Dogus; Barbuto, Sara; Sheahan, Thomas C; Shine, James P; Alshawabkeh, Akram N

    2014-01-01

    This paper describes the results of a benchscale testing program to assess the efficacy of a reactive core mat (RCM) for short term isolation and partial remediation of contaminated, subaqueous sediments. The 1.25 cm thick RCM (with a core reactive material such as organoclay with filtering layers on top and bottom) is placed on the sediment, and approximately 7.5 - 10 cm of overlying soil is placed on the RCM for stability and protection. A set of experiments were conducted to measure the sorption characteristics of the mat core (organoclay) and sediment used in the experiments, and to determine the fate of semi-volatile organic contaminants and non-reactive tracers through the sediment and reactive mat. The experimental study was conducted on naphthalene-spiked Neponset River (Milton, MA) sediment. The results show nonlinear sorption behavior for organoclay, with sorption capacity increasing with increasing naphthalene concentration. Neponset River sediment showed a notably high sorption capacity, likely due to the relatively high organic carbon fraction (14%). The fate and transport experiments demonstrated the short term efficiency of the reactive mat to capture the contamination that is associated with the post-capping period during which the highest consolidation-induced advective flux occurs, driving solid particles, pore fluid and soluble contaminants toward the reactive mat. The goal of the mat placement is to provide a physical filtering and chemically reactive layer to isolate contamination from the overlying water column. An important finding is that because of the high sorption capacity of the Neponset River sediment, the physical filtering capability of the mat is as critical as its chemical reactive capacity.

  2. Tracking paraglacial sediment with cosmogenic 10Be using an example from the northwest Scottish Highlands

    Science.gov (United States)

    Fame, Michelle L.; Owen, Lewis A.; Spotila, James A.; Dortch, Jason M.; Caffee, Marc W.

    2018-02-01

    Beryllium-10 concentrations in samples of sediment and bedrock from five study sites across the Scottish Highlands trace paraglacial sediment sources and define the nature of glacial erosion for the late Quaternary. Exposure ages derived from 10Be concentrations in ridge and lower elevation bedrock range from 10 to 33 ka, which suggest that polythermal ice and warm based ice were primarily responsible for producing glacial sediment. Comparisons of 10Be concentrations between catchment-wide sediment (2.06 ± 0.34 × 104 to 11.24 ± 1.54 × 104 atoms g-1 SiO2; n = 33), near surface deposits (2.71 ± 0.33 × 104 to 3.48 ± 0.49 × 104 atoms g-1 SiO2; n = 6), 4-m-thick deep till (0.68 × 10410Be atoms g-1 SiO2; n = 1), ridge bedrock (8.93 ± 0.47 × 104 to 34.05 ± 1.66 × 104 atoms g-1 SiO2; n = 20), and lower elevation polished bedrock (6.74 ± 0.67 × 104 to 12.65 ± 0.7 × 104 atoms g-1 SiO2, n = 5) indicate that most sand fluxing through catchments in the Scottish Highlands is sourced from the remobilization and vertical mixing of near surface deposits. These findings indicate that glaciogenic material continues to dominate paraglacial sediment budgets more than 11 ka after deglaciation.

  3. XRF intermediate thickness layer technique for analysis of residue of hard to dissolve materials

    International Nuclear Information System (INIS)

    Mzyk, Z.; Mzyk, J.; Buzek, L.; Baranowska, I.

    1998-01-01

    This work presents a quick method for lead and silver determination in materials, such as slags from silver metallurgy and slimes from copper electrorefining, which are very difficult to dissolve, even using a microwave technique. The idea was to dissolve the possibly greatest amount of the sample using acids. Insoluble deposit was filtered out. Silver content in the solution was analysed by potentiometric titration or AAS, lead content by XRS, while sediment deposit on filter - by XRF intermediate thickness technique. The results of silver and lead analysis obtained by this method were compared with those obtained by classical method, i.e. melting the residue with sodium peroxide. (author)

  4. Cross validation of two partitioning-based sampling approaches in mesocosms containing PCB contaminated field sediment, biota, and activated carbon amendment

    DEFF Research Database (Denmark)

    Nørgaard Schmidt, Stine; Wang, Alice P.; Gidley, Philip T

    2017-01-01

    with multiple thicknesses of silicone and in situ pre-equilibrium sampling with low density polyethylene (LDPE) loaded with performance reference compounds were applied independently to measure polychlorinated biphenyls (PCBs) in mesocosms with (1) New Bedford Harbor sediment (MA, USA), (2) sediment and biota......, and (3) activated carbon amended sediment and biota. The aim was to cross validate the two different sampling approaches. Around 100 PCB congeners were quantified in the two sampling polymers, and the results confirmed the good precision of both methods and were in overall good agreement with recently...... published silicone to LDPE partition ratios. Further, the methods yielded Cfree in good agreement for all three experiments. The average ratio between Cfree determined by the two methods was factor 1.4±0.3 (range: 0.6-2.0), and the results thus cross-validated the two sampling approaches. For future...

  5. Static and dynamic through thickness lamina properties of thick laminates

    NARCIS (Netherlands)

    Lahuerta, F.; Nijssen, R.P.L.; Van der Meer, F.P.; Sluys, L.J.

    2015-01-01

    Thick laminates are increasingly present in large composites structures such as wind turbine blades. Different factors are suspected to be involved in the decreased static and dynamic performance of thick laminates. These include the effect of self-heating, the scaling effect, and the manufacturing

  6. Geophysical imaging of the lacustrine sediments deposited in the La Calderilla Volcanic Caldera (Gran Canaria Island, Spain) for paleoclimate research

    Science.gov (United States)

    Himi, Mahjoub; Rodríguez-González, Alejandro; Criado, Constantino; Tapias, Josefina C.; Ravazzi, Cesare; Pérez-Torrado, Francisco; Casas, Albert

    2016-04-01

    The discovery of well-preserved maar structures is important not only for studying the eruptive activity and formation of volcanoes, but also for paleoclimate research, since laminated maar lake sediments may contain very detailed archives of climate and environmental history. Maars are a singular type of volcanic structure generated by explosive phreatomagmatic eruptions as a result of interaction between rising magma and groundwater. This kind of structures are characterised by circular craters, often filled with water and/or lacustrine sediments and surrounded by a ring of pyroclastic deposits.Recently a borehole was drilled at the bottom of La Calderilla volcanic complex which penetrated about 8.7 m in its sedimentary sequence and paleobotanical study has supplied the first evidence of paleoenvironmental evolution during the Holocene on the Gran Canaria Island. This survey, however, did not penetrate into the substrate because the total thickness of the sedimentary fill was unknown. Since the age of formation of La Calderilla volcanic complex based on K/Ar dating is about 85,000 years (Upper Pleistocene), the possibility of its sedimentary fill extends beyond of the Holocene is extremely attractive, since, for example, there are few paleoenvironmental data regarding how much the last glaciation that affected the Canary Islands. In these circumstances, the knowledge of the total thickness of the lacustrine sediments is crucial to design a deeper borehole in the next future. Therefore, the subsurface characterisation provided by geophysics is essential for determining thickness and geometry of the sedimentary filling. Multielectrode ERT method was used to obtain five 2-D resistivity cross-sections into La Calderilla volcanic caldera. An Iris Syscal Pro resistivity system with 48 electrodes connected to a 94 m long cable (2m electrode spacing) in Wenner-Schlumberger configuration for an investigation depth of about 20 m. Data quality (q Current injected was

  7. Physico - chemical Up-grading studies of uraniferous xenotime mineral from ferruginous siltstone sediments of Um hamd, Um bogma area, sinai, Egypt

    International Nuclear Information System (INIS)

    Abdel-Monem, H.M.; Elassy, I.E.; Bishay, A.F.; El-Kammar, A.M.

    1998-01-01

    The exposed paleozoic deposits at Um Bogma area in west central sinai contain three main units namely; the lower sandstone, the middle carbonate and the upper sandstone. These units are composed of intercalation of clay minerals, sand, carbonate and iron oxides.The upper layers of the lower sandstone and the base of the middle carbonate units contain possible resources of anomalously uraniferous xenotime (YPO 4 ). Xenotime, being preferentially concentrated with the very fine grain sizes, is more abundant in the argillaceous sediments. The associated clay minerals are represented by kaolinite the non-clay minerals include hematite, goethite and quartz.The up-grading of uraniferous xenotime from a bulk head sample assaying 1.44% Y 2 O 3 was performed by collaborative technological processes that include; liquid/liquid separation using two immiscible liquids (CCI 4 and H 2 O) and finally acid leaching. By applying the proposed flowsheet, more than 90% of xenotime is recovered with an assay value of more than 45% Y 2 O 3 . The simplicity of the proposed flowsheet allows it to be adopted to semi-industrial or even industrial purposes

  8. Coupling climate conditions, sediment sources and sediment transport in an alpine basin

    Science.gov (United States)

    Rainato, Riccardo; Picco, Lorenzo; Cavalli, Marco; Mao, Luca; Neverman, Andrew J.; Tarolli, Paolo

    2017-04-01

    In a fluvial system, mountain basins control sediment export to the lowland rivers. Hence, the analysis of the erosion processes and sediment delivery patterns that act in mountain basins is important. Several studies have investigated the alterations triggered by recent climatic change on the hydrological regime, whilst only a few works have explored the consequences on the sediment dynamics. Here we combined and analyzed the quasi-unique dataset of climatic conditions, landscape response, and sediment export produced, since 1986 in the Rio Cordon basin (5 km2, Eastern Italian Alps) to examine the sediment delivery processes occurring in the last three decades. The temperature, precipitation, and fluvial sediment fluxes in the basin were analyzed using continuous measurement executed by a permanent monitoring station, while the landscape evolution was investigated by three sediment source inventories established in 1994, 2006, and 2016. Thus, the analysis focused on the trends exhibited during the periods 1986-1993, 1994-2006, and 2007-2015. In terms of climatic conditions, three distinct climate forcing stages can be observed in the periods analyzed: a relatively stable phase (1986-1993), a period characterized by temperature and rainfall fluctuations (1994-2006), and a more recent warmer and wetter phase (2007-2015). In the 1986-1993 period, the fluvial sediment fluxes reflected the stable trend exhibited by the climatic conditions. In the subsequent 1994-2006 period, the average temperature and precipitation were in line with that previously observed, although with higher interannual variability. Notwithstanding the climate forcing and the occurrence of high magnitude/low frequency floods that strongly influenced the source areas, between 1994 and 2006 the Rio Cordon basin showed relatively limited erosion activity. Hence, the climatic conditions and the landscape response can only partially explain the strong increase of sediment export recorded in the 1994

  9. Radioactive contamination of the Balchug (Upper Yenisey) floodplain, Russia in relation to sedimentation processes and geomorphology.

    Science.gov (United States)

    Linnik, V G; Brown, J E; Dowdall, M; Potapov, V N; Surkov, V V; Korobova, E M; Volosov, A G; Vakulovsky, S M; Tertyshnik, E G

    2005-03-01

    The radioactive contamination of a riverine floodplain, heavily influenced by discharges from Krasnoyarsk-26, has been studied with respect to sedimentation processes and the geomorphology of the Upper Yenisey floodplain. The study was effected by implementation of a regime of in situ observations and measurements, sampling, and the interpretation of satellite images. The results of the study indicate that on the Balchug Bypass Floodplain, radionuclide contamination is primarily influenced by the thickness of the deposited sediments, and the area can be considered as two depositional environments. The Balchug floodplain area was contaminated due to sedimentation of radionuclide-contaminated alluvium, whose depositional regime significantly changed after the construction of a hydroelectric power station in 1967. Contamination levels are lower on the upstream part of the floodplain where sediment depth is less than 0.2-0.3 m, and this contamination started to accumulate in 1967, while the downstream part of the floodplain, exhibiting deeper deposits, displays higher levels of radionuclide contamination because radionuclides began to deposit here in 1958 when the Krasnoyarsk-26 Mining and Chemical Combine (KMCC) commenced operation. Radionuclide contamination of the floodplain is also related to the elevation of the floodplain, higher regions of the floodplain typically having lower contamination than low-lying areas, which tend to be frequently inundated with sediments being deposited during such inundations. Local relief, its orientation, and vegetation cover have also combined to form sediment traps with significantly higher radionuclide contamination. Lithological analysis combined with radiometric assay indicates a total 137Cs floodplain inventory of 33.7 GBq.

  10. Radioactive contamination of the Balchug (Upper Yenisey) floodplain, Russia, in relation to sedimentation processes and geomorphology

    International Nuclear Information System (INIS)

    Linnik, V.G.; Korobova, E.M.; Volosov, A.G.; Brown, J.E.; Dowdall, M.; Potapov, V.N.; Surkov, V.V.; Vakulovsky, S.M.; Tertyshnik, E.G.

    2005-01-01

    The radioactive contamination of a riverine floodplain, heavily influenced by discharges from Krasnoyarsk-26, has been studied with respect to sedimentation processes and the geomorphology of the Upper Yenisey floodplain. The study was effected by implementation of a regime of in situ observations and measurements, sampling, and the interpretation of satellite images. The results of the study indicate that on the Balchug Bypass Floodplain, radionuclide contamination is primarily influenced by the thickness of the deposited sediments, and the area can be considered as two depositional environments. The Balchug floodplain area was contaminated due to sedimentation of radionuclide-contaminated alluvium, whose depositional regime significantly changed after the construction of a hydroelectric power station in 1967. Contamination levels are lower on the upstream part of the floodplain where sediment depth is less than 0.2-0.3 m, and this contamination started to accumulate in 1967, while the downstream part of the floodplain, exhibiting deeper deposits, displays higher levels of radionuclide contamination because radionuclides began to deposit here in 1958 when the Krasnoyarsk-26 Mining and Chemical Combine (KMCC) commenced operation. Radionuclide contamination of the floodplain is also related to the elevation of the floodplain, higher regions of the floodplain typically having lower contamination than low-lying areas, which tend to be frequently inundated with sediments being deposited during such inundations. Local relief, its orientation, and vegetation cover have also combined to form sediment traps with significantly higher radionuclide contamination. Lithological analysis combined with radiometric assay indicates a total 137 Cs floodplain inventory of 33.7 GBq

  11. Gondwana sedimentation in the Chintalapudi sub-basin, Godavari Valley, Andhra Pradesh

    Energy Technology Data Exchange (ETDEWEB)

    Lakshminarayana, G. [Geological Survey of India, Calcutta (India). Division of Monitoring

    1995-10-01

    A 3000 m thick Gondwana lithic fill consisting of multifacies associations were preserved in a NW-SE oriented intracratonic Chintalapudi sub-basin set across the Eastern Chat Complex (EGC). Sedimentation commenced with the deposition of diamictite-rhythmite sequence of the Talchir Formation in glacio-lacustrine environment. The succeeding sandstone-coal cyclothems of the Barakar Formation were formed in fluvial-coal swamps complex. The fluvial streams flowed across the EGC, originating somewhere in the southeast beyond the East Coast of India. Phase wise upliftment of the EGC during Mesozoic imparted changes to the Permian intercontinental drainage system which started supplying increased amount of detritus to the basin. Basin marginal faults were first formed at the beginning of Triassic. Alluvial fans originated in the east and southeast and northwesterly flowing braided streams deposited the conglomerate sandstone sequence of the Kamthi Formation. The Early Jurassic uplift of the Mailaram high in the north imparted westerly shift to the braided rivers during the Kota sedimentation. Due to prominence of Kamavarapukota ridge in the south by Early Cretaceous, the drainage pattern became centripetal and short-lived high sinuous rivers debouched into the basin. The silting up of the Chintalapudi sub-basin with the sandstone-claystone sequence of the Gangapur Formation marks the culmination of the Gondwana sedimentation, perhaps, coinciding with the breakup of India from the Gondwanaland.

  12. Crustal Structure and Mantle Transition Zone Thickness beneath the Central Mongolia from Teleseismic Receiver Functions

    Science.gov (United States)

    He, J.; Wu, Q.; Gao, M.; Munkhuu, U.; Demberel, S. G.

    2013-12-01

    The Mongolian Plateau (northern Asia) is situated between the Gobi-Altai range and the Siberian craton. In order to understand the crustal and mantle structure environmental characteristics, we use the teleseismic data recorded by 69 broadband stations located in the Central Mongolia(103.5°-111.5°E, 42°-50°N). The teleseismic events are selected from the global earthquakes between Aug. 2011 and Dec. 2013 with magnitude >5.5and the epicentral distance range from 30° to 95° to the center of the network. Lateral variations of the crustal thicknesses H and Vp/Vs ratios are obtained by using receiver function method. The crust thins gradually from northwest to southeast in the studying field. We found that the thinnest crust is ~37.5km in the southeast which is Gobi. The distribution of Vp/Vs ratios are between 1.68 and 1.84, which shows the heterogeneity. There are three high-anomaly areas: the Gobi range which is the Later Paleozoic Orogeny; the Khentei Mountains which is in the Jurassic-Cretaceous Reactive Continental Margin; the northwest area which is granite. Our research not only reveals the powerful evident of the crustal formation and evolution mechanism, but also provides some constraints on the mechanism of uplift of the Mongolian Plateau.This study was supported by the international cooperation project of the Ministry of Science and Technology of China (2011DFB20120).

  13. Was the extreme and wide-spread marine oil-snow sedimentation and flocculent accumulation (MOSSFA) event during the Deepwater Horizon blow-out unique?

    Science.gov (United States)

    Vonk, Sophie M; Hollander, David J; Murk, AlberTinka J

    2015-11-15

    During the Deepwater Horizon blowout, thick layers of oiled material were deposited on the deep seafloor. This large scale benthic concentration of oil is suggested to have occurred via the process of Marine Oil Snow Sedimentation and Flocculent Accumulation (MOSSFA). This meta-analysis investigates whether MOSSFA occurred in other large oil spills and identifies the main drivers of oil sedimentation. MOSSFA was found to have occurred during the IXTOC I blowout and possibly during the Santa Barbara blowout. Unfortunately, benthic effects were not sufficiently studied for the 52 spills we reviewed. However, based on the current understanding of drivers involved, we conclude that MOSSFA and related benthic contamination may be widespread. We suggest to collect and analyze sediment cores at specific spill locations, as improved understanding of the MOSSFA process will allow better informed spill responses in the future, taking into account possible massive oil sedimentation and smothering of (deep) benthic ecosystems. Copyright © 2015 Elsevier Ltd. All rights reserved.

  14. Alternation of Sediment Characteristics during Sediment Microbial Fuel Cells Amended Biochar

    Science.gov (United States)

    Yang, Xunan; Chen, Shanshan

    2018-01-01

    Sediment microbial fuel cells (SMFCs) are considered as a new technology in sediment remediation, while biochars can promote interspecies electron transfer in bioelectrochemical systems. We conducted the SMFCs amended with biochars to investigate their effects on of sediment characteristics. Results showed that the anode of SMFCs could oxidize the chemical oxidizable matter in sediments (by 4%-16%) correlating with the maximum power density (r=0.982, palternations under SMFC operation, which gave information on the element pool related to pollutants and the risk of the application of SMFCs.

  15. Blueschist metamorphism and its tectonic implication of Late Paleozoic-Early Mesozoic metabasites in the mélange zones, central Inner Mongolia, China

    Science.gov (United States)

    Zhang, Jinrui; Wei, Chunjing; Chu, Hang

    2015-01-01

    Blueschists in central Inner Mongolia are distributed as layers and blocks in mélanges including the southern zone in Ondor Sum area and the northern zone in Manghete and Naomuhunni areas. They have been attributed to the subduction of Early Paleozoic oceanic crust. Blueschists from Ondor Sum and Naomuhunni are characterized by occurrence of sodic amphibole coexisting with epidote, albite, chlorite, calcic amphibole (in Ondor Sum) and muscovite (in Naomuhunni). Blueschists in Manghete contain porphyroblastic albite with inclusions of garnet and epidote in a matrix dominated by calcic-sodic amphibole, epidote, chlorite, albite and muscovite. Phase equilibria modeling for three blueschist samples using pseudosection suggest that the AlM2 contents in sodic amphibole can be used as a good barometer in the limited assemblage involving sodic amphibole + actinolite + epidote + chlorite + albite + quartz under pressures 7-10 kbar. In the sodic amphibole-bearing assemblages, the NaM4 contents in sodic amphibole mainly decrease as temperature rises, being a potential thermometry. The calculated pseudosections constrain the P-T conditions of blueschists to be 3.2-4.2 kbar/355-415 °C in Ondor Sum, 8.2-9.0 kbar/455 °C-495 °C in Manghete and 6.6-8.1 kbar/420-470 °C in Naomuhunni. These P-T estimates indicate a rather high geothermal gradient of 18-25 °C/km for the blueschist metamorphism, being of intermediate P/T facies series. Available zircon U-Pb age data suggests that the protoliths of blueschists were formed later than Late Paleozoic-Early Mesozoic and metamorphosed soon afterwards. An alternative interpretation for the tectonic implication of blueschists in central Inner Mongolia is that they may be a new type attributed to closure of limited ocean basins and do not represent a tectonic regime occurred in conventional subduction setting.

  16. Crustal contamination versus an enriched mantle source for intracontinental mafic rocks: Insights from early Paleozoic mafic rocks of the South China Block

    Science.gov (United States)

    Xu, Wenjing; Xu, Xisheng; Zeng, Gang

    2017-08-01

    Several recent studies have documented that the silicic rocks (SiO2 > 65 wt.%) comprising Silicic Large Igneous Provinces are derived from partial melting of the crust facilitated by underplating/intraplating of "hidden" large igneous province-scale basaltic magmas. The early Paleozoic intracontinental magmatic rocks in the South China Block (SCB) are dominantly granitoids, which cover a combined area of 22,000 km2. In contrast, exposures of mafic rocks total only 45 km2. These mafic rocks have extremely heterogeneous isotopic signatures that range from depleted to enriched (whole rock initial 87Sr/86Sr = 0.7041-0.7102; εNd(t) = - 8.4 to + 1.8; weighted mean zircon εHf(t) = - 7.4 to + 5.2), show low Ce/Pb and Nb/U ratios (0.59-13.1 and 3.5-20.9, respectively), and variable Th/La ratios (0.11-0.51). The high-MgO mafic rocks (MgO > 10 wt.%) tend to have lower εNd(t) values (- 4) and Sm/Nd ratios (> 0.255). The differences in geochemistry between the high-MgO and low-MgO mafic rocks indicate greater modification of the compositions of high-MgO mafic magmas by crustal material. In addition, generally good negative correlations between εNd(t) and initial 87Sr/86Sr ratios, MgO, and K2O, along with the presence of inherited zircons in some plutons, indicate that the geochemical and isotopic compositions of the mafic rocks reflect significant crustal contamination, rather than an enriched mantle source. The results show that high-MgO mafic rocks with fertile isotopic compositions may be indicative of crustal contamination in addition to an enriched mantle source, and it is more likely that the lithospheric mantle beneath the SCB during the early Paleozoic was moderately depleted than enriched by ancient subduction processes.

  17. Growth of sulfate reducers in deep-subseafloor sediments stimulated by crustal fluids

    Directory of Open Access Journals (Sweden)

    Katja eFichtel

    2012-02-01

    Full Text Available On a global scale, crustal fluids fuel a substantial part of the deep subseafloor biosphere by providing electron acceptors for microbial respiration. In this study, we examined bacterial cultures from a sediment column of the Juan de Fuca Ridge, Northeast Pacific (IODP Site U1301 which is divided into three distinctive compartments: an upper sulfate-containing zone, formed by bottom-seawater diffusion, a sulfate-depleted zone and a second (~140 m thick sulfate-containing zone influenced by fluid diffusion from the basaltic aquifer. Sulfate reducers were isolated from near-surface and near-basement sediments. All initial enrichments harboured specific communities of heterotrophic microorganisms. Among those, the number of isolated spore-forming Firmicutes decreased from 60% to 21% with sediment depth. Strains affiliated to Desulfosporosinus lacus, Desulfotomaculum sp. and Desulfovibrio aespoeensis were recovered from the upper sediment layers (1.3-9.1 meters below seafloor, mbsf. Several strains of Desulfovibrio indonesiensis and one relative of Desulfotignum balticum were isolated from near-basement sediments (240-262 mbsf. The physiological investigation of strains affiliated to D. aespoeensis, D. indonesiensis and D. balticum indicated that they were all able to use sulfate, thiosulfate and sulfite as electron acceptors. In the presence of sulfate, they grew strain-specifically on a few short-chain n-alcohols and fatty acids, only. The strains fermented either ethanol, pyruvate or betaine. Interestingly, all strains utilized hydrogen and the isolate affiliated to D. indonesiensis even exhibited an autotrophic life-mode. Thus, in the deep subseafloor where organic substrates are limited or hardly degradable, hydrogen might become an essential electron donor. The isolation of non-sporeforming sulfate reducers from fluid-influenced layers indicates that they have survived the long-term burial as active populations even after the separation from

  18. Structural evolution of the Irtysh Shear Zone: implication for the Late Paleozoic amalgamation of multiple arc systems in Central Asia

    Science.gov (United States)

    Li, Pengfei; Sun, Min; Rosenbaum, Gideon

    2015-04-01

    The NW-SE Irtysh Shear Zone represents a major tectonic boundary in the Central Asian Orogenic Belt, recording the amalgamation history between the peri-Siberian orogenic system and the Kazakhstan orogenic system. The structural evolution and geodynamics of this shear zone is still poorly documented. Here we present new structural data complemented by chronological data in an attempt to unravel the geodynamic significance of the Irtysh Shear Zone in the context of accretion history of the Central Asian Orogenic Belt. Our results show three episodes of deformation for the shear zone. D1 foliation is locally recognized in low strain area and recorded by garnet inclusions, whereas D2 is represented by a sub-horizontal fabric and related NW-SE lineation. D3 is characterized by a transpersonal deformation event, to form a series of NW-SE mylonitic belts with sinistral kinematics, and to overprint D2 fabric forming regional-scale NW-SE upright folds. A paragneiss sample from the shear zone yielded the youngest detrital zircon peaks in the late Carboniferous, placing a maximum age constraint on the deformation, which overlaps in time with the late Paleozoic collision between the Chinese Altai and the intraoceanic arc system of the East Junggar and West Junggar. We interpret three episodes of deformation to represent orogenic thickening (D1), collapse (D2) and thickening (D3) in response to this collisional event. Sinistral shearing (D3) together with the coeval dextral shearing in the Tianshan accommodate eastward extrusion of the Kazakhstan orogenic system during the late Paleozoic amalgamation of the Central Asian Orogenic Belt. Acknowledgements: This study was financially supported by the Major Basic Research Project of the Ministry of Science and Technology of China (Grant: 2014CB440801), Hong Kong Research Grant Council (HKU705311P and HKU704712P), National Science Foundation of China (41273048, 41273012) and a HKU CRCG grant. The work is a contribution of the Joint

  19. Geochemistry of Early Paleozoic boninites from the Central Qilian block, Northwest China: Constraints on petrogenesis and back-arc basin development

    Science.gov (United States)

    Gao, Zhong; Zhang, Hong-Fei; Yang, He; Luo, Bi-Ji; Guo, Liang; Xu, Wang-Chun; Pan, Fa-Bin

    2018-06-01

    Early Paleozoic boninites occur in the Central Qilian orogenic belt, Northwest China. Their petrogenesis provides insights into lithosphere process and tectonic evolution of the Qilian block. In this paper, we carry out a study of geochronological, geochemical and Sr-Nd isotopic compositions for the Early Paleozoic boninites in the Lajishan area of the Central Qilian block. The Lajishan boninites (∼483 Ma) have high Al2O3/TiO2 (36.7-64.7) and CaO/TiO2 (31.1-49.6) ratios, and high MgO (7.86-10.47 wt%), Cr (439-599 ppm) and Ni (104-130 ppm) contents, indicating that the boninites result from a refractory mantle source. They are depleted in high field-strength elements (HFSE) and enriched in large ion lithophile elements (LILE), coupled with slightly high initial 87Sr/86Sr values of 0.7059-0.7074 and low εNd(t) values of -1.05 to +2.66, indicating that the mantle source was metasomatized by subducted slab-derived components. We found that an assemblage of low-Ca group and high-Ca group boninites occurred in the Lajishan belt. The high-Ca group boninites were derived from relatively fertile mantle with slightly higher melting degree, whereas the low-Ca group boninites were generated by partial melting of more refractory mantle wedge peridotites with slightly lower melting degree. The assemblage of low-Ca group and high-Ca group boninites reveals that the low-Ca group boninites were generated by the further melting of the more refractory mantle source after the segregation of the high-Ca group boninitic magmas in response to the back-arc basin opening. In the light of reported boninites worldwide, a diagram of Zr/Y vs. CaO/Al2O3 is used to identify boninites in fore-arc and back-arc regions. We suggest that the Lajishan boninites represent the products of back-arc basin development in response to the northward subduction of the Qaidam-West Qinling ocean slab.

  20. Conodont color alteration index and upper Paleozoic thermal history of the Amazonas Basin, Brazil

    Science.gov (United States)

    Cardoso, Cassiane Negreiros; Sanz-López, Javier; Blanco-Ferrera, Silvia; Lemos, Valesca Brasil; Scomazzon, Ana Karina

    2015-12-01

    The conodont color alteration index (CAI) was determined in elements from core samples of the Frasnian Barreirinha Formation (one well) and of the Pennsylvanian-Permian Tapajós Group (twenty three wells and one limestone quarry) in the Amazonas Basin. The thermal history of the basin is analyzed using the CAI value distribution represented in maps and stratigraphic sections through correlation schemes, and in conjunction with previously published data. The pattern of palaeotemperatures for CAI values of 1.5-3 is coincident with organic matter maturation under a sedimentary overburden providing diagenetic conditions in the oil/gas window. Locally, conodonts show metamorphism (CAI value of 6-7) in relation to the intrusion of diabase bodies in beds including high geothermal gradient evaporites. Microtextural alteration on the surface conodonts commonly shows several types of overgrowth microtextures developed in diagenetic conditions. Locally, recrystallization in conodonts with a high CAI value is congruent with contact metamorphism in relation to Mesozoic intrusions. The CAI values of 1.5 or 2 observed close to the surface in several areas of the basin may be interpreted in relation to a high thermal palaeogradient derived from the magmatic episode or/and to the local denudation of the upper part of the Paleozoic succession prior to this thermal event.

  1. Upper Paleozoic coal measures and unconventional natural gas systems of the Ordos Basin, China

    Directory of Open Access Journals (Sweden)

    Xuan Tang

    2012-11-01

    Full Text Available Upper Paleozoic coal measures in the Ordos Basin consist of dark mudstone and coal beds and are important source rocks for gas generation. Gas accumulations include coal-bed methane (CBM, tight gas and conventional gas in different structural areas. CBM accumulations are mainly distributed in the marginal area of the Ordos Basin, and are estimated at 3.5 × 1012 m3. Tight gas accumulations exist in the middle part of the Yishan Slope area, previously regarded as the basin-centered gas system and now considered as stratigraphic lithologic gas reservoirs. This paper reviews the characteristics of tight gas accumulations: poor physical properties (porosity < 8%, permeability < 0.85 × 10−3 μm2, abnormal pressure and the absence of well-defined gas water contacts. CBM is a self-generation and self-reservoir, while gas derived from coal measures migrates only for a short distance to accumulate in a tight reservoir and is termed near-generation and near-reservoir. Both CBM and tight gas systems require source rocks with a strong gas generation ability that extends together over wide area. However, the producing area of the two systems may be significantly different.

  2. Source to Sink Tectonic Fate of Large Oceanic Turbidite Systems and the Rupturing of Great and Giant Megathrust Earthquakes (Invited)

    Science.gov (United States)

    Scholl, D. W.; Kirby, S. H.; von Huene, R.

    2010-12-01

    OCEAN FLOOR OBSERVATIONS: Oceanic turbidite systems accumulate above igneous oceanic crust and are commonly huge in areal and volumetric dimensions. For example, the volume of the Zodiac fan of the Gulf of Alaska is roughly 300,000 cubic km. Other large oceanic systems construct the Amazon cone, flood the Bay of Bengal abyss, and accumulate along trench axes to thickness of 1 to 7 km and lengths of 1000 to 3000 km, e.g., the Aleutian-Alaska, Sumatra-Andaman, Makran, and south central Chile Trenches. THE ROCK RECORD: Despite the large dimensions of oceanic turbidite systems, they are poorly preserved in the rock record. This includes oceanic systems deposited in passive-margin oceans, e.g., the Paleozoic Iapetus and Rheric oceans of the Atlantic realm, This circumstance does not apply to Cretaceous and E. Tertiary rock sequences of the north Pacific rim where oceanic turbidite deposits are preserved as accretionary complexes, e.g., the Catalina-Pelona-Orocopia-Rand schist of California and the Chugach-Kodiak complex of Alaska. These rock bodies are exhumed crustal underplates of once deeply (15-30 km) subducted oceanic turbidite systems. PATH FROM SOURCE TO TECTONIC SINK: The fate of most oceanic turbidite systems is to be removed from the sea floor and, ultimately, destroyed. This circumstance is unavoidable because most of them are deposited on lower plate crust destined for destruction in a subduction zone. During the past 4-5 myr alone a volume of 1-1.5 million cubic km of sediment sourced from the glaciated drainages of the Gulf of Alaska flooded the 3000-km-long Aleutian-Alaska trench axis. A small part of this volume accumulated tectonically as a narrow, 10-30-km wide accretionary frontal prism. But about 80 percent was subducted and entered the subduction channel separating the two plates. The subduction channel, roughly 1 km thick, conveys the trench turbidite deposits landward down dip along the rupturing width of the seismogenic zone. SEISMIC CONSEQUENCE

  3. Through thickness property variations in a thick plate AA7050 friction stir welded joint

    International Nuclear Information System (INIS)

    Canaday, Clinton T.; Moore, Matthew A.; Tang, Wei; Reynolds, A.P.

    2013-01-01

    In this study, moderately thick (32 mm) AA7050 plates were joined by friction stir welding (FSW). Various methods were used to characterize the welded joints, including nugget grain size measurements at different locations through the thickness, micro-hardness indentation through nugget, thermo-mechanically affected zone (TMAZ), and heat affected zone (HAZ) at different cross section heights, and residual stress measurement using the cut compliance method with full thickness and partial thickness specimens. All testing results are consistent with the presence of a strong gradient in peak temperature through the plate thickness during FSW.

  4. Beryllium-10 in Chesapeake Bay sediments: an indicator of sediment provenance

    International Nuclear Information System (INIS)

    Helz, G.R.; Valette-Silver, Nathalie

    1992-01-01

    In a plot of 10 Be vs. Fe, central Chesapeake Bay sediments can be segregated into distinct units. This plot reveals an unexpected, statistically significant difference between sediments on the eastern and western flanks of the main channel, implying different origins. Although the 10 Be concentrations in sediments from these two regions span as much as an order of magnitude range, the 10 Be/Fe ratios vary by an amount approximating analytical error alone. The large concentration ranges are ascribed to hydraulic sorting, which can produce variance in composition while not affecting ratios between grain surface components such as Fe and Be. On the basis of 10 Be/Fe signatures, sediments on the western flank of the main channel appear to have been derived from the Susquehanna or another Piedmont/Appalachian river. Sediments on the eastern flank may have been transported from the south, by landward flowing bottom currents, or may be relics of a Pleistocene estuarine system. Conditions under which 10 Be may prove a useful tool in sediment provenance studies elsewhere are discussed. (Author)

  5. Transient electromagnetic study of basin fill sediments in the Upper San Pedro Basin, Mexico

    Science.gov (United States)

    Bultman, M.W.; Gray, F.

    2011-01-01

    The Upper San Pedro River Basin in Mexico and the United States is an important riparian corridor that is coming under increasing pressure from growing populations and the associated increase in groundwater withdrawal. Several studies have produced three-dimensional maps of the basin fill sediments in the US portion of the basin but little work has been done in the Mexican portion of the basin. Here, the results of a ground-based transient electromagnetic (TEM) survey in the Upper San Pedro Basin, Mexico are presented. These basin fill sediments are characterized by a 10-40 m deep unsaturated surficial zone which is composed primarily of sands and gravels. In the central portion of the basin this unsaturated zone is usually underlain by a shallow clay layer 20-50 m thick. Beneath this may be more clay, as is usually the case near the San Pedro River, or interbedded sand, silt, and clay to a depth of 200-250 m. As you move away from the river, the upper clay layer disappears and the amount of sand in the sediments increases. At 1-2 km away from the river, sands can occupy up to 50% of the upper 200-250 m of the sediment fill. Below this, clays are always present except where bedrock highs are observed. This lower clay layer begins at a depth of about 200 m in the central portion of the basin (250 m or more at distances greater than 1-2 km from the river) and extends to the bottom of most profiles to depths of 400 m. While the depth of the top of this lower clay layer is probably accurate, its thickness observed in the models may be overestimated due to the relatively low magnetic moment of the TEM system used in this study. The inversion routine used for interpretation is based on a one-dimensional geologic model. This is a layer based model that is isotropic in both the x and y directions. Several survey soundings did not meet this requirement which invalidates the inversion process and the resulting interpretation at these locations. The results from these

  6. Long-term monitoring of streambed sedimentation and scour in a dynamic stream based on streambed temperature time series.

    Science.gov (United States)

    Sebok, Eva; Engesgaard, Peter; Duque, Carlos

    2017-08-24

    This study presented the monitoring and quantification of streambed sedimentation and scour in a stream with dynamically changing streambed based on measured phase and amplitude of the diurnal signal of sediment temperature time series. With the applied method, changes in streambed elevation were estimated on a sub-daily scale with 2-h intervals without continuous maintenance of the measurement system, thus making both high temporal resolution and long-term monitoring of streambed elevations possible. Estimates of streambed elevation showed that during base flow conditions streambed elevation fluctuates by 2-3 cm. Following high stream stages, scouring of 2-5 cm can be observed even at areas with low stream flow and weak currents. Our results demonstrate that weather variability can induce significant changes in the stream water and consequently sediment temperatures influencing the diurnal temperature signal in such an extent that the sediment thickness between paired temperature sensors were overestimated by up to 8 cm. These observations have significant consequences on the design of vertical sensor spacing in high-flux environments and in climates with reduced diurnal variations in air temperature.

  7. Bioleaching of heavy metal polluted sediment: influence of sediment properties. Pt. 2

    Energy Technology Data Exchange (ETDEWEB)

    Loeser, C. [Technische Universitaet Dresden, Institut fuer Lebensmittel- und Bioverfahrenstechnik, Bergstrasse 120, D-01062 Dresden (Germany); Zehnsdorf, A. [UFZ-Umweltforschungszentrum Leipzig-Halle GmbH, Umwelt- und Biotechnologisches Zentrum, Permoserstrasse 15, D-04318 Leipzig (Germany); Hoffmann, P.; Seidel, H. [UFZ-Umweltforschungszentrum Leipzig-Halle GmbH, Department Bioremediation, Permoserstrasse 15, D-04318 Leipzig (Germany)

    2006-08-15

    A remediation process for heavy metal polluted sediment has previously been developed, in which the heavy metals are removed from the sediment by solid-bed bioleaching using sulfuric acid as a leaching agent arising from added elemental sulfur (S{sup 0}). This process has been engineered with Weisse Elster River sediment (dredged near Leipzig, Germany), as an example. Here, six heavy metal polluted sediments originating from various bodies of water in Germany were subjected to bioleaching to evaluate the applicability of the developed process on sediment of different nature: each sediment was mixed with 2 % S{sup 0}, suspended in water and then leached under identical conditions. The buffer characteristics of each sediment were mainly governed by its carbonate and Ca content, i.e., by its geological background, the redox potential and oxidation state depended on its pre-treatment (e.g., on land disposal), while the pH value was influenced by both. The added S{sup 0} was quickly oxidized by the indigenous microbes even in slightly alkaline sediment. The microbially generated H{sub 2}SO{sub 4} accumulated in the aqueous phase and was in part precipitated as gypsum. Significant acidification and heavy metal solubilization only occurred with sediment poor in buffer substances. With the exception of one sediment, the behavior in bioleaching correlated well with the behavior in titration with H{sub 2}SO{sub 4}. Since the content in carbonate seemed to be the most important factor deciding on the leachability of a sediment, oxic Weisse Elster River sediment was mixed with 2 % S{sup 0} and 0 to 100 g/kg of ground limestone to simulate various buffer capacities, suspended in water and then leached. The lime did not inhibit microbial S{sup 0} oxidation but generated a delay in acidification due to neutralization of formed H{sub 2}SO{sub 4}, where the pH only started to decrease when the lime was completely consumed. The more lime the sediment contained, the longer this lag

  8. Ca Isotope Geochemistry in Marine Deep Sea Sediments of the Eastern Pacific

    Science.gov (United States)

    Wittke, A.; Gussone, N. C.; Derigs, D.; Schälling, M.; Teichert, B. M.

    2017-12-01

    Ca isotope ratio analysis (δ44/40Ca) is a powerful tool to investigate diagenetic reactions in marine sedimentary porewater systems, as it is sensitive to processes such as carbonate dissolution, precipitation, recrystallization, ion exchange and deep fluid sources, due to the isotopic difference between dissolved Ca and solid carbonate minerals (e.g. [1];[2]). We analyzed eight sediment cores of the (paleo-) Pacific equatorial age transect. Two sediment cores show decreasing Ca isotope profiles starting at the sediment/water interface with seawater-like values down to sediment-like values due to recrystallization and an increasing in the bottom part again to seawater-like values. The other studied cores show different degrees of flattening of this middle bulge. We interpret this pattern either as an effect of sediment composition and thickness, decreasing recrystallization rates and/or fluid flux or a combination of all of these factors at the respective sampling sites. Element concentration profiles and Sr-isotope variations on some of these sediment cores show a similar behavior, supporting our findings ([3]; [4]). Seawater influx at (inactive) seamounts is supposed to cause seawater-like values at the bottom of the sediment cores by fluids migrating through the oceanic basement (e.g. [5]). While [6] hypothesizes that two seamounts or bathymetric pits are connected, with a recharge and a discharge site [7] say that uptaken fluids could be released through the surrounding seafloor as well due to diffusive exchange with the underlying oceanic crust. Our Ca isotope results combined with a transport reaction model approach support the latter hypothesis. References: [1] Teichert B. M., Gussone N. and Torres M. E. (2009) [2] Ockert C., Gussone N., Kaufhold S. and Teichert B. (2013) [3] Pälike H., Lyle M., Nishi H., Raffi I., Gamage K. and Klaus A. (eds.) (2010) [4] Voigt J., Hathorne E. C., Frank M., Vollstaedt H. and Eisenhauer A. (2015) [5] Villinger H. W

  9. Non-contact radiation thickness gauge

    International Nuclear Information System (INIS)

    Tsujii, T.; Okino, T.

    1983-01-01

    A noncontact thickness gauge system for measuring the thickness of a material comprising a source of radiation, a detector for detecting the amount of radiation transmitted through the material which is a function of the absorptance and thickness of the material, a memory for storing the output signals of the detector and curve-defining parameters for a plurality of quadratic calibration curves which correspond to respective thickness ranges, and a processor for processing the signals and curve defining parameters to determine the thickness of the material. Measurements are made after precalibration to obtain calibration curves and these are stored in the memory, providing signals representative of a nominal thickness and an alloy compensation coefficient for the material. The calibration curve corresponding to a particular thickness range is selected and the curve compensated for drift; the material is inserted into the radiation path and the detector output signal processed with the compensated calibration curve to determine the thickness of the material. (author)

  10. Determining the sources of fine-grained sediment using the Sediment Source Assessment Tool (Sed_SAT)

    Science.gov (United States)

    Gorman Sanisaca, Lillian E.; Gellis, Allen C.; Lorenz, David L.

    2017-07-27

    A sound understanding of sources contributing to instream sediment flux in a watershed is important when developing total maximum daily load (TMDL) management strategies designed to reduce suspended sediment in streams. Sediment fingerprinting and sediment budget approaches are two techniques that, when used jointly, can qualify and quantify the major sources of sediment in a given watershed. The sediment fingerprinting approach uses trace element concentrations from samples in known potential source areas to determine a clear signature of each potential source. A mixing model is then used to determine the relative source contribution to the target suspended sediment samples.The computational steps required to apportion sediment for each target sample are quite involved and time intensive, a problem the Sediment Source Assessment Tool (Sed_SAT) addresses. Sed_SAT is a user-friendly statistical model that guides the user through the necessary steps in order to quantify the relative contributions of sediment sources in a given watershed. The model is written using the statistical software R (R Core Team, 2016b) and utilizes Microsoft Access® as a user interface but requires no prior knowledge of R or Microsoft Access® to successfully run the model successfully. Sed_SAT identifies outliers, corrects for differences in size and organic content in the source samples relative to the target samples, evaluates the conservative behavior of tracers used in fingerprinting by applying a “Bracket Test,” identifies tracers with the highest discriminatory power, and provides robust error analysis through a Monte Carlo simulation following the mixing model. Quantifying sediment source contributions using the sediment fingerprinting approach provides local, State, and Federal land management agencies with important information needed to implement effective strategies to reduce sediment. Sed_SAT is designed to assist these agencies in applying the sediment fingerprinting

  11. The behavioural characteristics of sediment properties and their implications for sediment fingerprinting as an approach for identifying sediment sources in river basins

    Science.gov (United States)

    Koiter, A. J.; Owens, P. N.; Petticrew, E. L.; Lobb, D. A.

    2013-10-01

    Sediment fingerprinting is a technique that is increasingly being used to improve the understanding of sediment dynamics within river basins. At present, one of the main limitations of the technique is the ability to link sediment back to their sources due to the non-conservative nature of many of the sediment properties. The processes that occur between the sediment source locations and the point of collection downstream are not well understood or quantified and currently represent a black-box in the sediment fingerprinting approach. The literature on sediment fingerprinting tends to assume that there is a direct connection between sources and sinks, while much of the broader environmental sedimentology literature identifies that numerous chemical, biological and physical transformations and alterations can occur as sediment moves through the landscape. The focus of this paper is on the processes that drive particle size and organic matter selectivity and biological, geochemical and physical transformations and how understanding these processes can be used to guide sampling protocols, fingerprint selection and data interpretation. The application of statistical approaches without consideration of how unique sediment fingerprints have developed and how robust they are within the environment is a major limitation of many recent studies. This review summarises the current information, identifies areas that need further investigation and provides recommendations for sediment fingerprinting that should be considered for adoption in future studies if the full potential and utility of the approach are to be realised.

  12. Deposits of Large-scale Mass Movements in the Sediments of Hallstätter See (Austria) - Recurrent Natural Hazards at a UNESCO World Cultural Heritage Site

    Science.gov (United States)

    Lauterbach, S.; Strasser, M.; Tjallingii, R.; Kowarik, K.; Reschreiter, H.; Spatl, C.; Brauer, A.

    2017-12-01

    The cultural importance of underground salt mining in Hallstatt (Austria), which is documented since the Middle Bronze Age, has been recognized already 20 years ago by assigning the status of a UNESCO World Cultural Heritage Site to the Hallstatt area, particularly because of the wealth of archaeological artefacts from the Early Iron Age. Local mining activity is well documented for prehistoric times and known to have been repeatedly affected by large-scale mass movements, for example at the end of the Bronze Age and during the Late Iron Age. In contrast, evidence of mining activity between the 5th and late 13th century AD is scarce, which could be related to socio-economic changes but also to continued mass movement activity, possibly biasing the archaeological record. Within the present study, a 15.63-m-long 14C-dated sediment core from Hallstätter See has been investigated with respect to the deposits of large-scale mass movements. Most of the lake sediment sequence consists of cm- to sub-mm-scale laminated carbonate mud with frequently intercalated small-scale turbidites, reflecting seasonally variable detrital input from the tributaries, but two major event layers clearly stand out. The upper one comprises a 2.45-m-thick basal mass transport deposit (containing folded laminated sediments, homogenized sediments with liquefaction structures, and coarse gravel) and an overlying 1.45-m-thick co-genetic turbidite. From the lower event layer only the topmost part of the turbiditic sequence with a (minimum) thickness of 1.49 m was recovered. Based on their sedimentological characteristics, both event layers are interpreted as the subaqueous continuation of large-scale mass movements, which occurred at ca. 1050 and 2300 cal. years BP and possibly originated from the rock walls along the western lake shore where also the salt mining area is located. This indicates that mass movement activity not only threatened prehistoric salt mining, but occurred also repeatedly

  13. Sediment impacts on marine sponges.

    Science.gov (United States)

    Bell, James J; McGrath, Emily; Biggerstaff, Andrew; Bates, Tracey; Bennett, Holly; Marlow, Joseph; Shaffer, Megan

    2015-05-15

    Changes in sediment input to marine systems can influence benthic environments in many ways. Sponges are important components of benthic ecosystems world-wide and as sessile suspension feeders are likely to be impacted by changes in sediment levels. Despite this, little is known about how sponges respond to changes in settled and suspended sediment. Here we review the known impacts of sedimentation on sponges and their adaptive capabilities, whilst highlighting gaps in our understanding of sediment impacts on sponges. Although the literature clearly shows that sponges are influenced by sediment in a variety of ways, most studies confer that sponges are able to tolerate, and in some cases thrive, in sedimented environments. Critical gaps exist in our understanding of the physiological responses of sponges to sediment, adaptive mechanisms, tolerance limits, and the particularly the effect of sediment on early life history stages. Copyright © 2015 Elsevier Ltd. All rights reserved.

  14. Sediment Capping and Natural Recovery, Contaminant Transport Fundamentals With Applications to Sediment Caps

    National Research Council Canada - National Science Library

    Petrovski, David M; Corcoran, Maureen K; May, James H; Patrick, David M

    2005-01-01

    Engineered sediment caps and natural recovery are in situ remedial alternatives for contaminated sediments, which consist of the artificial or natural placement of a layer of material over a sediment...

  15. Thickness filters for gradient based multi-material and thickness optimization of laminated composite structures

    DEFF Research Database (Denmark)

    Sørensen, Rene; Lund, Erik

    2015-01-01

    This paper presents a new gradient based method for performing discrete material and thickness optimization of laminated composite structures. The novelty in the new method lies in the application of so-called casting constraints, or thickness filters in this context, to control the thickness...... variation throughout the laminate. The filters replace the layerwise density variables with a single continuous through-the-thickness design variable. Consequently, the filters eliminate the need for having explicit constraints for preventing intermediate void through the thickness of the laminate....... Therefore, the filters reduce both the number of constraints and design variables in the optimization problem. Based upon a continuous approximation of a unit step function, the thickness filters are capable of projecting discrete 0/1 values to the underlying layerwise or ”physical” density variables which...

  16. Fluvial sediment transport: Analytical techniques for measuring sediment load

    International Nuclear Information System (INIS)

    2005-07-01

    Sediment transport data are often used for the evaluation of land surface erosion, reservoir sedimentation, ecological habitat quality and coastal sediment budgets. Sediment transport by rivers is usually considered to occur in two major ways: (1) in the flow as a suspended load and (2) along the bed as a bed load. This publication provides guidance on selected techniques for the measurement of particles moving in both modes in the fluvial environment. The relative importance of the transport mode is variable and depends on the hydraulic and sedimentary conditions. The potential user is directed in the selection of an appropriate technique through the presentation of operating principles, application guidelines and estimated costs. Techniques which require laboratory analysis are grab sample, pump sample, depth sample, point integrated and radioactive tracers. Techniques which will continuously record data are optical backscattering, nuclear transmission, single frequency acoustic and laser diffraction

  17. Modeling chemical accumulation in sediment of small waterbodies accounting for sediment transport and water-sediment exchange processes over long periods.

    Science.gov (United States)

    Patterson, David Albert; Strehmel, Alexander; Erzgräber, Beate; Hammel, Klaus

    2017-12-01

    In a recent scientific opinion of the European Food Safety Authority it is argued that the accumulation of plant protection products in sediments over long time periods may be an environmentally significant process. Therefore, the European Food Safety Authority proposed a calculation to account for plant protection product accumulation. This calculation, however, considers plant protection product degradation within sediment as the only dissipation route, and does not account for sediment dynamics or back-diffusion into the water column. The hydraulic model Hydrologic Engineering Center-River Analysis System (HEC-RAS; US Army Corps of Engineers) was parameterized to assess sediment transport and deposition dynamics within the FOrum for Co-ordination of pesticide fate models and their USe (FOCUS) scenarios in simulations spanning 20 yr. The results show that only 10 to 50% of incoming sediment would be deposited. The remaining portion of sediment particles is transported across the downstream boundary. For a generic plant protection product substance this resulted in deposition of only 20 to 50% of incoming plant protection product substance. In a separate analysis, the FOCUS TOXSWA model was utilized to examine the relative importance of degradation versus back-diffusion as loss processes from the sediment compartment for a diverse range of generic plant protection products. In simulations spanning 20 yr, it was shown that back-diffusion was generally the dominant dissipation process. The results of the present study show that sediment dynamics and back-diffusion should be considered when calculating long-term plant protection product accumulation in sediment. Neglecting these may lead to a systematic overestimation of accumulation. Environ Toxicol Chem 2017;36:3223-3231. © 2017 SETAC. © 2017 SETAC.

  18. Empirical relations of sediment transport prediction in Polish multibanks shore; Empiryczne zaleznosci prognozujace ruch osadow w warunkach wielorewawego polskiego brzegu morskiego

    Energy Technology Data Exchange (ETDEWEB)

    Pruszak, Z. [Polska Akademia Nauk, Gdansk (Poland). Inst. Budownictwa Wodnego; Wierzchnicki, R. [Institute of Nuclear Chemistry and Technology, Warsaw (Poland)

    1995-12-31

    Qualitative and quantitative description of various elements of bottom sediment movement in Polish multibanks coastal region has been down. Empirical relations linking transport velocity, thickness of the drag layer and the transport volume with the generating wave-current background have been presented. Practical engineering advices on performance of various reports concerning coastal engineering or coastal zone ecology. (author).

  19. Establishing a sediment budget in the newly created “Kleine Noordwaard” wetland area in the Rhine–Meuse delta

    Directory of Open Access Journals (Sweden)

    E. C. van der Deijl

    2018-03-01

    Full Text Available Many deltas are threatened by accelerated soil subsidence, sea-level rise, increasing river discharge, and sediment starvation. Effective delta restoration and effective river management require a thorough understanding of the mechanisms of sediment deposition, erosion, and their controls. Sediment dynamics has been studied at floodplains and marshes, but little is known about the sediment dynamics and budget of newly created wetlands. Here we take advantage of a recently opened tidal freshwater system to study both the mechanisms and controls of sediment deposition and erosion in newly created wetlands. We quantified both the magnitude and spatial patterns of sedimentation and erosion in a former polder area in which water and sediment have been reintroduced since 2008. Based on terrestrial and bathymetric elevation data, supplemented with field observations of the location and height of cut banks and the thickness of the newly deposited layer of sediment, we determined the sediment budget of the study area for the period 2008–2015. Deposition primarily took place in channels in the central part of the former polder area, whereas channels near the inlet and outlet of the area experienced considerable erosion. In the intertidal area, sand deposition especially takes place at low-lying locations close to the channels. Mud deposition typically occurs further away from the channels, but sediment is in general uniformly distributed over the intertidal area, due to the presence of topographic irregularities and micro-topographic flow paths. Marsh erosion does not significantly contribute to the total sediment budget, because wind wave formation is limited by the length of the fetch. Consecutive measurements of channel bathymetry show a decrease in erosion and deposition rates over time, but the overall results of this study indicate that the area functions as a sediment trap. The total contemporary sediment budget of the study area amounts to 35.7

  20. Effects of sediment composition on inorganic mercury partitioning, speciation and bioavailability in oxic surficial sediments

    International Nuclear Information System (INIS)

    Zhong Huan; Wang Wenxiong

    2008-01-01

    Artificially prepared sediments were used to assess the effects of sediment composition on inorganic Hg partitioning, speciation and bioavailability. Organic coating in sediment greatly increased the Hg partitioning and the amount of bioavailable Hg bound with the clay and the Fe and Mn oxides, but had little effect on that bound with the quartz and calcium carbonate as a result of weaker binding of humic acids and fulvic acids. The clay content increased the concentration of Hg in the sediments but inhibited the gut juice extraction due to the strong binding of Hg-organic matter (OM) complexes. Most Hg in the sediments was complexed by OM (mainly distributed in the organo-complexed phase and the strongly complexed phase), and the Hg-OM complexes (especially Hg in the strongly complexed phase) in sediments contributed much to gut juice extraction. Redistribution of Hg-OM complexes between sediments and gut juices may occur during gut juice extraction and modify Hg bioavailability and speciation in sediments. - Organic and clay contents in sediments are the two most important components controlling Hg partitioning in sediments and bioavailability

  1. Comparison of 120- and 140-μm SMILE Cap Thickness Results in Eyes With Thick Corneas.

    Science.gov (United States)

    Liu, Manli; Zhou, Yugui; Wu, Xianghua; Ye, Tiantian; Liu, Quan

    2016-10-01

    To evaluate clinical outcomes after small incision lenticule extraction (SMILE) with different cap thicknesses in thick corneas. Forty patients with central corneal thickness of more than 560 μm were recruited in this prospective, randomized, masked, paired-eye study. Patients were randomized to receive SMILE with a 120-μm cap thickness in 1 eye and 140-μm cap thickness in the other. Uncorrected and corrected distance visual acuity (CDVA), contrast sensitivity (CS), higher-order aberrations (HOAs), and morphologic modifications of corneal architecture were measured during the 3-month follow-up period. Postoperative refractive outcomes, visual outcomes, CS, and the changes in HOAs were similar between both groups. The persistence of brightly reflective particles in the corneal interface layer was 1388.6 ± 219.5/mm in eyes with 120-μm cap thickness and 54.7 ± 8.6/mm in eyes with 140-μm cap thickness (P line at the interface layer almost disappeared in all eyes with 140-μm cap thickness, and it still persisted in 43% of the fellow eyes at 3 months postoperatively. The anterior surfaces of lenticules in the 140-μm cap thickness group exhibited more smoothness than in the 120-μm cap thickness group. There was a lower level corneal wound-healing response after SMILE with a 140-μm cap thickness than with a 120-μm cap thickness, although the thickness of cap creation did not affect visual outcomes by 3 months postoperatively.

  2. [Limnology of high mountain tropical lake, in Ecuador: characteristics of sediments and rate of sedimentation].

    Science.gov (United States)

    Gunkel, Günter

    2003-06-01

    Equatorial high mountain lakes are a special type of lake occurring mainly in the South American Andes as well as in Central Africa and Asia. They occur at altitudes of a few thousand meters above sea level and are cold-water lakes (limnological study was therefore undertaken at Lake San Pablo, Ecuador, to analyze the basic limnological processes of the lake, which has a tendency for eutrophication. Sediment quality of San Pablo Lake is given under consideration of horizontal and vertical distribution using sediment cores. Significance of sediments for eutrophication process of lakes is demonstrated using phosphorus concentration of sediments as well as the phosphorus retention capacity of the sediments by ratio Fe/P. Dating of the sediments is done using 137Cs and 210Pb, but the activity of 137Cs in the sediment was very low nearly at the detection level. Sedimentation rate is determined to be 3.5 mm/year and the sediment cores represent about 110 years. P concentration of the sediments is high (approximately 5 g/kg dry substance), and P retention capacity by Fe is insufficient (Fe/P = 4). The sediment quality did not change significantly during the past decades, and the trophic state of San Pablo Lake was already less or more eutrophic 110 years ago. The contamination of the lake sediments by heavy metals is insignificant.

  3. Thermal, chemical, and mass-transport processes induced in abyssal sediments by the emplacement of nuclear waste: experimental and modeling results

    International Nuclear Information System (INIS)

    McVey, D.F.; Erickson, K.L.; Seyfried, W.

    1980-01-01

    This paper discusses heat and mass transport studies of marine red clay sediments being considered as a nuclear waste isolation medium. Numerical models indicate that for a maximum allowable sediment/canister interface temperature of 200 to 250 0 C, the sediment can absorb about 1.5 kW initial power from waste in a 3 m long by 0.3 m dia canister buried 30 m in the sediment. Fluid displacement due to convection is found to be less than 1 m. Laboratory studies of the geochemical effects induced by heating sediment/seawater mixtures indicate that the canister and waste form must be designed to resist a hot, acid (pH 3 to 4) oxidizing environment. Since the thermally altered sediment volume of about 5.5 m 3 is small relative to the sediment volume overlying the canister, the acid and oxidizing conditions are not anticipated to effect the properties of the far field. Using sorption coefficient correlations, the migration of four nuclides 239 Pu, 137 Cs, 129 I, and 99 Tc were computer for a canister buried 30 m deep in a 60 m thick red clay sediment layer. It was found that the 239 Pu and 137 Cs are essentially completely contained in the sediments, while 129 I and 99 Tc broke through the 30 m of sediment in about 5000 years. The resultant peak injection rates of 4.6 x 10 -5 μCi/year-m 2 for 129 I and 1.6 x 10 -2 μCi/year-m 2 for 99 Tc were less than the natural radioactive flux of 226 Ra (3.5 to 8.8 x 10 -4 μCi/year-m 2 ) and 222 Rn

  4. Water-rock interactions in volcaniclastic sediments across the Izu-Bonin-Mariana Arc: comparison of sites U1438, U1201, 792 and 793.

    Science.gov (United States)

    van der Land, C.; Sena, C.; Loudin, L. C.; Zhang, Z.

    2014-12-01

    The rapid deposition of volcanogenic sediments, highly susceptible to alteration by seawater has led to distinct pore water geochemical profiles throughout the sedimentary basins of the Izu-Bonin-Mariana Arc. Drilling at Site U1438, in the Amami-Sankaku Basin, recovered a 1300 m thick volcaniclastic section overlain by a 160 m thick section of sediments largely devoid of volcanic input. At Site U1438, 67 porewater samples were analyzed onboard for salinity, pH, oxidation-reduction potential and major and trace element concentrations. Here we focus on the depth profiles of elements which were also analyzed at Sites U1201, 792 and 793. Chloride and Bromide concentrations display similar trends; near constant in the upper 160 m and a linear downward increase to maximum concentrations from 600 mbsf onwards. This increase is likely caused by uptake of water by secondary minerals, resulting in chloride and bromide enrichment in the porewater. Calcium and magnesium porewater concentrations display opposite trends in the upper 440 m; the first increases from 11.5 to 140 mM, and the latter decreases from 53 mM until its depletion in the porewater. Leaching of Ca from the glass-rich sediments and underlying igneous basement are potential sources for Ca in the porewater, while Mg, Na and K presumably replace Ca through cation-exchange. Compared to Site U1438, similar trends of major elements concentration in the pore water were observed at the nearby Sites U1201 (serpentine mud volcano in the forearc of the Mariana subduction system), 792 and 793 (both in the Izu-Bonin forearc sedimentary basin). However, differences in depositional rates, thickness and age of the sedimentary basins, geothermal gradients and the influence of serpentine mud flows, have led to distinct pore water geochemical profiles.

  5. Application of Ground Penetrating Radar Supported by Mineralogical-Geochemical Methods for Mapping Unroofed Cave Sediments

    Directory of Open Access Journals (Sweden)

    Teja Čeru

    2018-04-01

    Full Text Available Ground penetrating radar (GPR using a special unshielded 50 MHz Rough Terrain Antenna (RTA in combination with a shielded 250 MHz antenna was used to study the capability of this geophysical method for detecting cave sediments. Allochthonous cave sediments found in the study area of Lanski vrh (W Slovenia are now exposed on the karst surface in the so-called “unroofed caves” due to a general lowering of the surface (denudation of carbonate rocks and can provide valuable evidence of the karst development. In the first phase, GPR profiles were measured at three test locations, where cave sediments are clearly evident on the surface and appear with flowstone. It turned out that cave sediments are clearly visible on GPR radargrams as areas of strong signal attenuation. Based on this finding, GPR profiling was used in several other places where direct indicators of unroofed caves or other indicators for speleogenesis are not present due to strong surface reshaping. The influence of various field conditions, especially water content, on GPR measurements was also analysed by comparing radargrams measured in various field conditions. Further mineralogical-geochemical analyses were conducted to better understand the factors that influence the attenuation in the area of cave sediments. Samples of cave sediments and soils on carbonate rocks (rendzina were taken for X-ray diffraction (XRD and X-ray fluorescence (XRF analyses to compare the mineral and geochemical compositions of both sediments. Results show that cave sediments contain higher amounts of clay minerals and iron/aluminium oxides/hydroxides which, in addition to the thickness of cave sediments, can play an important role in the depth of penetration. Differences in the mineral composition also lead to water retention in cave sediments even through dry periods which additionally contribute to increased attenuation with respect to surrounding soils. The GPR method has proven to be reliable for

  6. Effects of Attenuation of Gas Hydrate-bearing Sediments on Seismic Data: Example from Mallik, Northwest Territories, Canada

    Science.gov (United States)

    Bellefleur, G.; Riedel, M.; Brent, T.

    2007-05-01

    Wave attenuation is an important physical property of hydrate-bearing sediments that is rarely taken into account in site characterization with seismic data. We present a field example showing improved images of hydrate- bearing sediments on seismic data after compensation of attenuation effects. Compressional quality factors (Q) are estimated from zero-offset Vertical Seismic Profiling data acquired at Mallik, Northwest Territories, Canada. During the last 10 years, two internationally-partnered research drilling programs have intersected three major intervals of sub-permafrost gas hydrates at Mallik, and have successfully extracted core samples containing significant amount of gas hydrates. Individual gas hydrate intervals are up to 40m in thickness and are characterized by high in situ gas hydrate saturation, sometimes exceeding 80% of pore volume of unconsolidated clastic sediments having average porosities ranging from 25% to 40%. The Q-factors obtained from the VSP data demonstrate significant wave attenuation for permafrost and hydrate- bearing sediments. These results are in agreement with previous attenuation estimates from sonic logs and crosshole data at different frequency intervals. The Q-factors obtained from VSP data were used to compensate attenuation effects on surface 3D seismic data acquired over the Mallik gas hydrate research wells. Intervals of gas hydrate on surface seismic data are characterized by strong reflectivity and effects from attenuation are not perceptible from a simple visual inspection of the data. However, the application of an inverse Q-filter increases the resolution of the data and improves correlation with log data, particularly for the shallowest gas hydrate interval. Compensation of the attenuation effects of the permafrost likely explains most of the improvements for the shallow gas hydrate zone. Our results show that characterization of the Mallik gas hydrates with seismic data not corrected for attenuation would tend to

  7. Possible Significance of Early Paleozoic Fluctuations in Bottom Current Intensity, Northwest Iapetus Ocean

    Science.gov (United States)

    Lash, Gary G.

    1986-06-01

    Sedimentologic and geochemical characteristics of red and green deep water mudstone exposed in the central Appalachian orogen define climatically-induced fluctuations in bottom current intensity along the northwest flank of the Iapetus Ocean in Early and Middle Ordovician time. Red mudstone accumulated under the influence of moderate to vigorous bottom current velocities in oxygenated bottom water produced during climatically cool periods. Interbedded green mudstone accumulated at greater sedimentation rates, probably from turbidity currents, under the influence of reduced thermohaline circulation during global warming periods. The close association of green mudstone and carbonate turbidites of Early Ordovician (late Tremadocian to early Arenigian) age suggests that a major warming phase occurred at this time. Increasing temperatures reduced bottom current velocities and resulted in increased production of carbonate sediment and organic carbon on the carbonate platform of eastern North America. Much of the excess carbonate sediment and organic carbon was transported into deep water by turbidity currents. Although conclusive evidence is lacking, this eustatic event may reflect a climatic warming phase that followed the postulated glacio-eustatic Black Mountain event. Subsequent Middle Ordovician fluctuations in bottom current intensity recorded by thin red-green mudstone couplets probably reflect periodic growth and shrinkage of an ice cap rather than major glacial episodes.

  8. Resource potential of the Alum Shale in Denmark

    DEFF Research Database (Denmark)

    Gautier, Donald L.; Schovsbo, Niels H.; Nielsen, Arne Thorshøj

    2014-01-01

    . "Sweet spots" were defined as fault blocks that contain both TOC-rich Furongian Alum Shale and thick Silurian strata, indicating minor Late Paleozoic uplift and erosion and thus higher probability of gas retention, which is the main technical risk to the play. Large volumes of oil and then gas were...

  9. Chronology of Late Saalian and Middle Weichselian episodes of ice-free lacustrine sedimentation recorded in the Arumetsa section, southwestern Estonia

    Directory of Open Access Journals (Sweden)

    Maris Rattas

    2010-06-01

    Full Text Available The information obtained from a 21 m thick open-pit section of silty-clayey sediments in the Arumetsa bedrock valley, southwestern Estonia, revealed that lacustrine to glaciolacustrine sedimentation at the site started prior to 151 ka ago and lasted to about the end of marine isotope stage 6 (MIS6 at 130 ka. Further down from the 151 ka age-level to the bottom of the buried valley there are ca 60 m of lacustrine fine-grained sediments, the age of which remains still unclear. The Late Saalian sediments at Arumetsa are discordantly overlain by Middle Weichselian clay, silt and sand, deposited between ca 44 and 37 ka ago. As testified by optically stimulated luminescence (OSL ages, and pollen and diatom record, the Middle Weichselian fine-grained sediments contain redeposited Holsteinian but no Eemian pollen, and have not been fully bleached during deposition. Chronological, microfossil and sedimentological data show two hiatuses in the Arumetsa section. The first hiatus has left no sedimentary evidence for the period between ca 130 ka and 44 ka ago (MIS5 to older half of MIS3. The younger hiatus from ca 37 to 22 ka occurs between the Middle Weichselian lacustrine silt and the Late Weichselian till layer on top of the section.

  10. Late Ediacaran magnetostratigraphy of Baltica: Evidence for Magnetic Field Hyperactivity?

    Science.gov (United States)

    Bazhenov, Mikhail L.; Levashova, Natalia M.; Meert, Joseph G.; Golovanova, Inessa V.; Danukalov, Konstantin N.; Fedorova, Natalia M.

    2016-02-01

    Long-term changes in characteristics of the geomagnetic field may signal evolutionary changes within the Earth's interior. Among these long-term variations, the magnetic field reversal rate is probably the best known and most frequently used parameter to evaluate concomitant changes in the Earth's core. Although the reversal rate is well known for the last 150 Ma and reasonably constrained back to 300 Ma, knowledge of the early Paleozoic and earlier times is limited. Hence, the haunting question is whether the reversal pattern for the last 300 Myr is a good representation of the field behavior over a much longer interval. A paleomagnetic study of Upper Ediacaran sediments from the Zigan Fm. (Baltica in the western South Urals) revealed a high-temperature, dual-polarity component that is of primary origin (Levashova et al., 2013). In this paper, we present the results of a magnetostratigraphic study from the same sections that can be summed up as follows: 1) >30 magnetozones are found in the ca. 110 meters thick composite section of the Zigan Fm.; 2) A similar reversal pattern was reported from Upper Ediacaran sediments from the White Sea coast (North Russia) and SW Siberia but has never been found in clastic rocks of any other age; 3) The reversal pattern in three remote Ediacaran sections could not result from remagnetization or extremely slow sedimentation; 4) The reversal rate in the Late Ediacaran exceeded 20 reversals per million years; 5) The field appears to behave in a bipolar fashion during the period of hyperactivity.

  11. Sedimentation in a Submarine Seamount Apron at Site U1431, International Ocean Discovery Program Expedition 349, South China Sea

    Science.gov (United States)

    Dadd, K. A.; Clift, P. D.; Hyun, S.; Jiang, T.; Liu, Z.

    2014-12-01

    International Ocean Discovery Program (IODP) Expedition 349 Site U1431 is located near the relict spreading ridge in the East Subbasin of the South China Sea. Holes at this site were drilled close to seamounts and intersected the volcaniclastic apron. Volcaniclastic breccia and sandstone at Site U1431 are dated as late middle Miocene to early late Miocene (~8-13 Ma), suggesting a 5 m.y. duration of seamount volcanism. The apron is approximately 200 m thick and is sandwiched between non-volcaniclastic units that represent the background sedimentation. These comprise dark greenish gray clay, silt, and nannofossil ooze interpreted as turbidite and hemipelagic deposits that accumulated at abyssal water depths. At its base, the seamount sequence begins with dark greenish gray sandstone, siltstone, and claystone in upward fining sequences interpreted as turbidites intercalated with minor intervals of volcaniclastic breccia. Upsection the number and thickness of breccia layers increases with some beds up to 4.8 m and possibly 14.5 m thick. The breccia is typically massive, ungraded, and poorly sorted with angular to subangular basaltic clasts, as well as minor reworked subrounded calcareous mudstone, mudstone, and sandstone clasts. Basaltic clasts include nonvesicular aphyric basalt, sparsely vesicular aphyric basalt, highly vesicular aphyric basalt, and nonvesicular glassy basalt. Mudstone clasts are clay rich and contain foraminifer fossils. The matrix comprises up to 40% of the breccia beds and is a mix of clay, finer grained altered basalt clasts, and mafic vitroclasts with rare foraminifer fossils. Some layers have calcite cement between clasts. Volcaniclastic sandstone and claystone cycles interbedded with the breccia layers have current ripples and parallel laminations indicative of high-energy flow conditions during sedimentation. The breccia beds were most likely deposited as a series of debris flows or grain flows. This interpretation is supported by their

  12. Estimating suspended sediment yield, sedimentation controls and impacts in the Mellah Catchment of Northern Algeria

    International Nuclear Information System (INIS)

    Khanchoul, Kamel; Assassi Fella; Altschul, Robert

    2009-01-01

    This paper is an assessment of the suspended sediment yield in the Mellah Catchment of northern Algeria. We use discharge-sediment load relationships to explore the variability of water discharge and sediment load, and to investigate the impact of geomorphic factors disturbance on erosion and sedimentation. Suspended sediment load was analyzed in the Mellah Catchment (550 squre kms ) which was controlled by a gauging station to measure discharge and sediment transport. The relations between daily mean sediment concentration and daily mean water discharge were analyzed to develop sediment rating curves. For storms with no water samples, a sediment rating curve was developed. The technique involves stratification of data into discharge-based classes, the mean of which are used to fit a rating curve according to single flow data and season to provide various rating relationships. The mean annual sediment yield during the 24 years of the study period was 562 T km -2 in the Mellah Catchment. This drainage basin had high rainfall and runoff, the erosion was high. The high sediment yield in the Mellah basin could be explained by a high percentage of sparse grassland and cultivation developed on shallow marly silty-clayey soils with steep slopes often exceeding 12%. Almost all suspended sediment loads are transported during storm events that mainly occur in the winter and spring heavy and medium downpours. The scarceness of these events leads to a very large interseasonal variability of the wadi sediment fluxes. The negative impacts of this enhanced sediment mobility are directly felt in the western part of the basin which shows many mass movements, bank and gully erosion because cultivated areas are often bared during autumnal brief flash floods and furrowed downslope during the winter season. (author)

  13. Tracking the 10Be–26Al source-area signal in sediment-routing systems of arid central Australia

    Directory of Open Access Journals (Sweden)

    M. Struck

    2018-05-01

    Full Text Available Sediment-routing systems continuously transfer information and mass from eroding source areas to depositional sinks. Understanding how these systems alter environmental signals is critical when it comes to inferring source-area properties from the sedimentary record. We measure cosmogenic 10Be and 26Al along three large sediment-routing systems ( ∼  100 000 km2 in central Australia with the aim of tracking downstream variations in 10Be–26Al inventories and identifying the factors responsible for these variations. By comparing 56 new cosmogenic 10Be and 26Al measurements in stream sediments with matching data (n =  55 from source areas, we show that 10Be–26Al inventories in hillslope bedrock and soils set the benchmark for relative downstream modifications. Lithology is the primary determinant of erosion-rate variations in source areas and despite sediment mixing over hundreds of kilometres downstream, a distinct lithological signal is retained. Post-orogenic ranges yield catchment erosion rates of  ∼  6–11 m Myr−1 and silcrete-dominant areas erode as slow as  ∼  0.2 m Myr−1. 10Be–26Al inventories in stream sediments indicate that cumulative-burial terms increase downstream to mostly  ∼  400–800 kyr and up to  ∼  1.1 Myr. The magnitude of the burial signal correlates with increasing sediment cover downstream and reflects assimilation from storages with long exposure histories, such as alluvial fans, desert pavements, alluvial plains, and aeolian dunes. We propose that the tendency for large alluvial rivers to mask their 10Be–26Al source-area signal differs according to geomorphic setting. Signal preservation is favoured by (i high sediment supply rates, (ii high mean runoff, and (iii a thick sedimentary basin pile. Conversely, signal masking prevails in landscapes of (i low sediment supply and (ii juxtaposition of sediment storages with notably different exposure

  14. Estimates of elastic plate thicknesses beneath large volcanos on Venus

    Science.gov (United States)

    Mcgovern, Patrick J.; Solomon, Sean C.

    1992-01-01

    Megellan radar imaging and topography data are now available for a number of volcanos on Venus greater than 100 km in radius. These data can be examined to reveal evidence of the flexural response of the lithosphere to the volcanic load. On Earth, flexure beneath large hotspot volcanos results in an annual topographic moat that is partially to completely filled in by sedimentation and mass wasting from the volcano's flanks. On Venus, erosion and sediment deposition are considered to be negligible at the resolution of Magellan images. Thus, it may be possible to observe evidence of flexure by the ponding of recent volcanic flows in the moat. We also might expect to find topographic signals from unfilled moats surrounding large volcanos on Venus, although these signals may be partially obscured by regional topography. Also, in the absence of sedimentation, tectonic evidence of deformation around large volcanos should be evident except where buried by very young flows. We use analytic solutions in axisymmetric geometry for deflections and stresses resulting from loading of a plate overlying an inviscid fluid. Solutions for a set of disk loads are superimposed to obtain a solution for a conical volcano. The deflection of the lithosphere produces an annular depression or moat, the extent of which can be estimated by measuring the distance from the volcano's edge to the first zero crossing or to the peak of the flexural arch. Magellan altimetry data records (ARCDRs) from data cycle 1 are processed using the GMT mapping and graphics software to produce topographic contour maps of the volcanos. We then take topographic profiles that cut across the annular and ponded flows seen on the radar images. By comparing the locations of these flows to the predicted moat locations from a range of models, we estimate the elastic plate thickness that best fits the observations, together with the uncertainty in that estimate.

  15. APPLICATION OF SEDIMENT QUALITY GUIDELINES IN THE ASSESSMENT OF MANGROVE SURFACE SEDIMENT IN MENGKABONG LAGOON, SABAH, MALAYSIA

    Directory of Open Access Journals (Sweden)

    S. M. Praveena, M. Radojevic, M. H. Abdullah, A. Z. Aris

    2008-01-01

    Full Text Available There have been numerous sediment quality guidelines developed to monitor the sediments. Sediment quality guidelines are very useful to screen sediment contamination by comparing sediment contaminant concentration with the corresponding quality guideline, provide useful tools for screening sediment chemical data to identify pollutants of concern and prioritise problem sites and relatively good predictors of contaminations. However, these guidelines are chemical specific and do not include biological parameters. Aquatic ecosystems, including sediments, must be assessed in multiple components (biological data, toxicity, physicochemistry by using intregrated approaches in order to establish a complete and comprehensive set of sediment quality guidelines. Numerous sediment quality guidelines Washington Department of Ecology Sediment Quality Guideline, Australian and New Zealand Environment and Conservation Council, Swedish Environmental Sediment Quality, Screening Quick Reference Table, Portuguese Legislation on the Classification of Dredged Materials in Coastal Zones and Interim Sediment Quality Guideline for Hong Kong have been applied to the Mengkabong lagoon mangrove sediment and discussed. The most appropriate guideline that meets the prioritization criteria consistent with international initiatives and regulations is interim sediment quality values for Hong Kong. The guideline verifies that all the metals are below the Interim Sediment Quality Value-low. However, site-specific, biological testing and ecological analysis of exisiting benthics community structure related to sediment contamination are needed for final decision making in the case of Mengkabong lagoon.

  16. Thickness-Dependent Bioelectrochemical and Energy Applications of Thickness-Controlled Meso-Macroporous Antimony-Doped Tin Oxide

    Directory of Open Access Journals (Sweden)

    Daniel Mieritz

    2018-04-01

    Full Text Available Coatings of hierarchically meso-macroporous antimony-doped tin oxide (ATO enable interfacing adsorbed species, such as biomacromolecules, with an electronic circuit. The coating thickness is a limiting factor for the surface coverage of adsorbates, that are electrochemically addressable. To overcome this challenge, a carbon black-based templating method was developed by studying the composition of the template system, and finding the right conditions for self-standing templates, preventing the reaction mixture from flowing out of the mask. The thicknesses of as-fabricated coatings were measured using stylus profilometry to establish a relationship between the mask thickness and the coating thickness. Cyclic voltammetry was performed on coatings with adsorbed cytochrome c to check whether the entire coating thickness was electrochemically addressable. Further, bacterial photosynthetic reaction centers were incorporated into the coatings, and photocurrent with respect to coating thickness was studied. The template mixture required enough of both carbon black and polymer, roughly 7% carbon black and 6% poly(ethylene glycol. Coatings were fabricated with thicknesses approaching 30 µm, and thickness was shown to be controllable up to at least 15 µm. Under the experimental conditions, photocurrent was found to increase linearly with the coating thickness, up to around 12 µm, above which were diminished gains.

  17. Rapid Sediment Accumulation Results in High Methane Effluxes from Coastal Sediments.

    Directory of Open Access Journals (Sweden)

    Matthias Egger

    Full Text Available Globally, the methane (CH4 efflux from the ocean to the atmosphere is small, despite high rates of CH4 production in continental shelf and slope environments. This low efflux results from the biological removal of CH4 through anaerobic oxidation with sulfate in marine sediments. In some settings, however, pore water CH4 is found throughout the sulfate-bearing zone, indicating an apparently inefficient oxidation barrier for CH4. Here we demonstrate that rapid sediment accumulation can explain this limited capacity for CH4 removal in coastal sediments. In a saline coastal reservoir (Lake Grevelingen, The Netherlands, we observed high diffusive CH4 effluxes from the sediment into the overlying water column (0.2-0.8 mol m-2 yr-1 during multiple years. Linear pore water CH4 profiles and the absence of an isotopic enrichment commonly associated with CH4 oxidation in a zone with high rates of sulfate reduction (50-170 nmol cm-3 d-1 both suggest that CH4 is bypassing the zone of sulfate reduction. We propose that the rapid sediment accumulation at this site (~ 13 cm yr-1 reduces the residence time of the CH4 oxidizing microorganisms in the sulfate/methane transition zone (< 5 years, thus making it difficult for these slow growing methanotrophic communities to build-up sufficient biomass to efficiently remove pore water CH4. In addition, our results indicate that the high input of organic matter (~ 91 mol C m-2 yr-1 allows for the co-occurrence of different dissimilatory respiration processes, such as (acetotrophic methanogenesis and sulfate reduction in the surface sediments by providing abundant substrate. We conclude that anthropogenic eutrophication and rapid sediment accumulation likely increase the release of CH4 from coastal sediments.

  18. Elemental composition of a deep sediment core from Lake Stocksjoen in the Forsmark area

    Energy Technology Data Exchange (ETDEWEB)

    Stroemgren, Maarten [Umeaa Univ. (Sweden). Dept. of Ecology and Environmental Sciences; Brunberg, Anna-Kristina [Uppsala Univ. (Sweden). Dept. of Ecology and Evolution/Limnology

    2006-10-15

    A deep sediment core was taken from Lake Stocksjoen, situated within the Forsmark site investigation area. The 55 cm long sediment core, representing the entire history of the lake (approx 430 years) was sliced in 5 cm portions and analysed for various chemical elements, using ICP-MS technique. In total, 54 different elements - classified as main elements, heavy metals and trace elements - were analysed. In general terms, three different patterns of stratigraphy were derived from all the analysed elements. Calcium, manganese, lead and mercury occurred in highest concentrations in the upper sediments (<30 cm depth). Phosphorus, zinc, cadmium, antimony, tin and strontium occurred in more even proportions throughout the sediment core. All the other elements were substantially reduced in the upper parts (<30 cm) compared to the deeper parts of the sediment core. Metals that are considered as airborne pollutants were found in low or moderate concentrations. This is in concert with other investigations of pollutants that have been performed in the Forsmark area. The sediment of Lake Stocksjoen is highly organic, and has been so during the entire history of the lake. Much of the organic Material seems to be refractory and less susceptible for mineralisation and respiration during the prevailing environmental conditions. This corresponds well with the characteristic gelatinous cyanophycee gyttja found in the lower parts of the sediment core. Although speculative, the pronounced changes in elemental composition of the sediment at 30 cm depth may correspond to the final isolation of the lake from the Baltic Sea, which occurred approximately 230 years ago. The deeper parts (below 30 cm depth) thus may represent the time period with regular intrusions of brackish water into the lake basin. One important factor governing the environmental conditions and the resulting elemental composition of the sediment is the unusually thick 'microbial mat', which is characteristic

  19. Incorporation of Fine-Grained Sediment Erodibility Measurements into Sediment Transport Modeling, Capitol Lake, Washington

    Science.gov (United States)

    Stevens, Andrew W.; Gelfenbaum, Guy; Elias, Edwin; Jones, Craig

    2008-01-01

    Capitol Lake was created in 1951 with the construction of a concrete dam and control gate that prevented salt-water intrusion into the newly formed lake and regulated flow of the Deschutes River into southern Puget Sound. Physical processes associated with the former tidally dominated estuary were altered, and the dam structure itself likely caused an increase in retention of sediment flowing into the lake from the Deschutes River. Several efforts to manage sediment accumulation in the lake, including dredging and the construction of sediment traps upriver, failed to stop the lake from filling with sediment. The Deschutes Estuary Feasibility Study (DEFS) was carried out to evaluate the possibility of removing the dam and restoring estuarine processes as an alternative ongoing lake management. An important component of DEFS was the creation of a hydrodynamic and sediment transport model of the restored Deschutes Estuary. Results from model simulations indicated that estuarine processes would be restored under each of four restoration alternatives, and that over time, the restored estuary would have morphological features similar to the predam estuary. The model also predicted that after dam-removal, a large portion of the sediment eroded from the lake bottom would be deposited near the Port of Olympia and a marina located in lower Budd Inlet seaward of the present dam. The volume of sediment transported downstream was a critical piece of information that managers needed to estimate the total cost of the proposed restoration project. However, the ability of the model to predict the magnitude of sediment transport in general and, in particular, the volume of sediment deposition in the port and marina was limited by a lack of information on the erodibility of fine-grained sediments in Capitol Lake. Cores at several sites throughout Capitol Lake were collected between October 31 and November 1, 2007. The erodibility of sediments in the cores was later determined in the

  20. Estimating sediment discharge: Appendix D

    Science.gov (United States)

    Gray, John R.; Simões, Francisco J. M.

    2008-01-01

    Sediment-discharge measurements usually are available on a discrete or periodic basis. However, estimates of sediment transport often are needed for unmeasured periods, such as when daily or annual sediment-discharge values are sought, or when estimates of transport rates for unmeasured or hypothetical flows are required. Selected methods for estimating suspended-sediment, bed-load, bed- material-load, and total-load discharges have been presented in some detail elsewhere in this volume. The purposes of this contribution are to present some limitations and potential pitfalls associated with obtaining and using the requisite data and equations to estimate sediment discharges and to provide guidance for selecting appropriate estimating equations. Records of sediment discharge are derived from data collected with sufficient frequency to obtain reliable estimates for the computational interval and period. Most sediment- discharge records are computed at daily or annual intervals based on periodically collected data, although some partial records represent discrete or seasonal intervals such as those for flood periods. The method used to calculate sediment- discharge records is dependent on the types and frequency of available data. Records for suspended-sediment discharge computed by methods described by Porterfield (1972) are most prevalent, in part because measurement protocols and computational techniques are well established and because suspended sediment composes the bulk of sediment dis- charges for many rivers. Discharge records for bed load, total load, or in some cases bed-material load plus wash load are less common. Reliable estimation of sediment discharges presupposes that the data on which the estimates are based are comparable and reliable. Unfortunately, data describing a selected characteristic of sediment were not necessarily derived—collected, processed, analyzed, or interpreted—in a consistent manner. For example, bed-load data collected with