Sample records for thick marine sedimentary

  1. Sedimentary cobalt concentrations track marine redox evolution (United States)

    Swanner, Elizabeth; Planavsky, Noah; Lalonde, Stefan; Robbins, Jamie; Bekker, Andrey; Rouxel, Olivier; Konhauser, Kurt O.; Mojzsis, Stephen J.


    Oxygen production by photosynthesis drove the redox evolution of the atmosphere and ocean. Primary productivity by oxygenic photosynthesizers in the modern surface ocean is limited by trace nutrients such as iron, but previous studies have also observed high Co uptake associated with natural cyanobacterial populations. Constraining the size and variation of the oceanic reservoir of Co through time will help to understand the regulation of primary productivity and hence oxygenation through time. In this study, Co concentrations from iron formations (IF), shales and marine pyrites deposited over nearly 4 billion years of Earth's history are utilized to reconstruct secular changes in the mechanisms of Co removal from the oceanic reservoir. The Co reservoir prior to ~2 Ga was dominated by hydrothermal inputs and Fe(III)oxyhydroxides were likely involved in the removal of Co from the water column. Fe(II) oxidation in the water column resulted in the deposition of IF in the Archean and Paleoproterozoic, and the Co inventory of IF records a large oceanic reservoir of Co during this time. Lower Co concentrations in sediments during the Middle Proterozoic signify a decrease in the oceanic reservoir due to the expansion euxinic environments, corresponding to the results of previous studies. A transition to an oxidized deep ocean in the Phanerozoic is evidenced by correlation between Co and manganese (Mn) concentrations in hydrothermal and exhalative deposits, and in marine pyrites. This relationship between Co and Mn, signifying deposition of Co in association with Mn(IV)oxides, does not occur in the Precambrian. Mn(II) oxidation occurs at higher redox potentials than that required for Fe(II) oxidation, and the extent of Mn redox cycling prior to full ventilation of the oceans at the end of the Neoproterozoic was likely limited to spatially restricted oxic surface waters. In this regard, Co is another valuable redox proxy for tracking the growth and decline in oxygenated

  2. Gravimetric survey and modeling of the basement morphology in the sedimentary thickness characterization, NE portion of Paraná Sedimentary Basin - Brazil

    Directory of Open Access Journals (Sweden)

    Maximilian Fries


    Full Text Available ABSTRACT: The northeast portion of the Paraná Sedimentary Basin is distinguished by structural highs as the known Pitanga Dome, an uplifted structure identified in the last century. It represents a geological and evolutionary evidence of the Paraná Sedimentary Basin and has undergone inspired studies and intense exploration surveys. This study consists of a gravimetric survey in the Pitanga Dome area, State of São Paulo, Brazil. The Bouguer gravity anomalies have been identified and related to the structural high, sedimentary thickness, and the basement morphology. Processing and enhancement techniques were used for forward modeling based on previous studies. The three models from profiles sectioning the dome have a sedimentary thickness varying from 200 to 1.250 meters. The adopted methodology has provided important results determining that the Pitanga Dome can be understood through rational 3D visualization. The area can be interpreted as an undulating basement with thinning of sedimentary rocks related to deep features (structures in the crust/mantle limit (Moho uplift. This characteristic is confirmed by the sedimentary layer thickening present throughout the surrounding area. The results also offer important insights and support for further studies concerning the genesis and evolution of this and other uplifted structures of the Paraná Sedimentary Basin.

  3. Thick sedimentary sequence around Bahraich in the northern part of the central Ganga foreland basin (United States)

    Manglik, A.; Adilakshmi, L.; Suresh, M.; Thiagarajan, S.


    We present the results of a magnetotelluric study along a 285 km long profile between Hamirpur and Rupadia (Nepal border) across the central Ganga basin. The electrical resistivity image obtained by combining 1-D Occam inversion models for 39 sites reveals a significant contrast in the subsurface structure from south to north along the profile. At the southern end, the Bundelkhand massif is delineated as a high resistivity block buried beneath 250-300 m thick sediments. The thickness of sediments gradually increases to about 500-600 m at Kanpur, and to about 1.2 km at Lucknow. Here, the basement depth increases to more than 2.5 km within a profile distance of 20 km, which could be attributed to the Lucknow fault. The underlying rocks also have moderate resistivity and possibly represent the Vindhyans. The sedimentary sequence at the northern end of the profile around Bahraich is more than 9 km thick. Integrating the resistivity image with a published seismic velocity structure from the region and the lithology from the 3927 m deep Matera-I well reveals that the top 4 km succession is constituted of highly conductive Oligocene and younger rocks of the Matera Formation and the Siwaliks, and recent sediments whereas the underlying > 5 km section is composed of sedimentary rocks of the Bahraich Group overlying the Archean basement. The high conductivity of sediments in conjunction with the low seismic velocity and large Vp/Vs obtained by receiver function analysis implies poor consolidation of sediments and thus high seismic hazard potential. The present results have implications for hydrocarbon exploration, hazard potential scenario of the central Ganga basin, and flexural strength of the Indian Plate.

  4. A study of radionuclide transfer between invertebrates and their marine sedimentary environment

    International Nuclear Information System (INIS)

    Amiard-Triquet, Claude.


    Exchanges between sediment and marine organisms were studied in some benthic marine invertebrates, especially Arenicola marina L. (an Annelid). Experiments were carried out on the transfer of 60 Co, 137 Cs and accessorily 59 Fe and 144 Ce. Water was the chief vector for benthic marine invertebrates. These invertebrates seemed to act mainly in sedimentary areas on the redistribution of adsorbed radionuclides within the sediment. Radioactive contamination of the invertebrates was affected by various physiological or ecological factors. Benthic marine invertebrates were then studied as links in food chains. The transfer of 60 Co was studied in three food chains or fractions of food chains. The procedure allowed interesting observations from the health protection point of view and more fundamental investigations on cobalt metabolism (regulation, excretion) in a mollusc, a crustacea and a teleost [fr

  5. Prediction of CO2 leakage during sequestration into marine sedimentary strata

    International Nuclear Information System (INIS)

    Li, Qi; Wu Zhishen; Li Xiaochun


    Deep ocean storage of CO 2 could help reduce the atmospheric level of greenhouse gas as part of a climate change mitigation strategy. In this paper, a multiphase flow model of CO 2 sequestration into deep ocean sediments was designed associated with the formation of CO 2 hydrates. A simplified assumption was proposed to predict the critical time of CO 2 leakage from marine sedimentary strata into seawater. Moreover, some principal parameters, which include the permeability, anisotropy, total injection amount, and length of the injection part of wellbores, were investigated by numerical simulations. The numerical estimates are used to assess the feasibility and effectiveness of CO 2 storage in deep ocean sediments. Accurately predicting the actual fate of liquid CO 2 sequestered into the marine sedimentary strata at depths greater than 500 m is complicated by uncertainties associated with not only the chemical-physical behavior of CO 2 under such conditions but also the geo-environment of disposal sites. Modeling results have shown some implications that the effectiveness of CO 2 ocean sequestration depends mainly on the injection conditions (such as injection rate, total injection amount, and the depth of injection), the site geology (such as permeability and anisotropy of disposal formations), and the chemical-physical behavior of CO 2 in marine environment


    Arnould, M.


    There is a number of marine clays, mudstones, marls, 100 to 200 m thick, showing smectites, mixed layers illite/smectite, with a small percentage of organic matter and sulphides with a variable clay, silt, and carbonate content. I published (Arnould , 2006) examples from Lower Cambrian to Miocene in age and from the Baltic shore to Spain in Europe. Observations were made mostly in quarries and pits down to more than 40 m and in underground research laboratories (URL). Only visible on fresh cuts amongst a variety of fissures there is always a network of joints. Schematically one family is the bedding (horizontal) the two others are normal to the bedding and orthogonal between them. The orientations of vertical joints are different from the orientations of pits and quarries’s walls. The networks are intrinsic. It was first well described by Skempton & al (1969) in Eocene London Clay. Joints are matt in texture, clean, without filling or cement. The order of magnitude of their linear dimensions is decimeter to meter. It is necessary to start from the original sediment: mud. Deposited in flakes mud has a bee’s nest microscopic structure. Each nest is full of water. Hence mud may have a water content up to 300%, reported to its dry weight. Paradoxically mud is impervious. As proposed by Cosgrove (2001) progressive but discontinuous hydraulic fracturing could be the origin of vertical joints, with drainage upwards and compaction of the sediment. Geological observations show that ioints are formed during the sedimentation process. There is also a world literature concluding at the necessary early fracturing of mudstones and marls hosts of sand dykes. Very few faults are identified in field observations and on exploration logs. But it is obvious that drainage and compaction of mud over thousands square kilometers induced differential settlements with many syn-sedimentary non tectonic faults constituting another discontinuity network. These faults inside the same

  7. The transgressive-regressive cycle of the Romualdo Formation (Araripe Basin): Sedimentary archive of the Early Cretaceous marine ingression in the interior of Northeast Brazil (United States)

    Custódio, Michele Andriolli; Quaglio, Fernanda; Warren, Lucas Veríssimo; Simões, Marcello Guimarães; Fürsich, Franz Theodor; Perinotto, José Alexandre J.; Assine, Mario Luis


    Geologic events related to the opening of the South Atlantic Ocean deeply influenced the sedimentary record of the Araripe Basin. As consequence, upper stratigraphic units of the basin record a marine ingression in northeastern Brazil during the late Aptian. The timing and stratigraphic architecture of these units are crucial to understand the paleogeography of Gondwana and how the proto-Atlantic Ocean reached interior NE Brazil during the early Cretaceous. This marine ingression is recorded in the Araripe Basin as the Romualdo Formation, characterized by a transgressive-regressive cycle bounded by two regional unconformities. In the eastern part of the basin, the Romualdo depositional sequence comprises coastal alluvial and tide-dominated deposits followed by marine transgressive facies characterized by two fossil-rich intervals: a lower interval of black shales with fossil-rich carbonate concretions (Konservat-Lagerstätten) and an upper level with mollusk-dominated shell beds and shelly limestones. Following the marine ingression, an incomplete regressive succession of marginal-marine facies records the return of continental environments to the basin. The stratigraphic framework based on the correlation of several sections defines a transgressive-regressive cycle with depositional dip towards southeast, decreasing in thickness towards northwest, and with source areas located at the northern side of the basin. The facies-cycle wedge-geometry, together with paleocurrent data, indicates a coastal onlap towards NNW. Therefore, contrary to several paleogeographic scenarios previously proposed, the marine ingression would have reached the western parts of the Araripe Basin from the SSE.

  8. Sedimentary Characteristics of Marine Events from se Coast of India: Case Studies of 2004 Tsunami and 2013 Phailin Cyclone (United States)

    Karthikeyan, A.


    The 2004 Indian Tsunami has deposited a varied layer of sand sheets along the coast which depends upon on the coastal topography. Recognition Tsunami deposits were clearly observed as the sand sheets were laid over the soil which is distinctly different due to differences in the weathering and presence of organic material of vegetation. To understand the preservation potential of 2004 tsunami deposits we were studied a transect profile with seven pits sediments along Thiruvengadu coast , Nagapattinam. The study reveals that presence of sand sheets preserved a mínimum of 10 cm thickness to máximum of 22 cm and the distance is 300 from HTL. From the present study six sedimentary layers were identfied which are (a) Top sediments deposited after IOT, (b). Tsunami sand sheets (c) Silty sand (d). Erosional base and top (e) Silty sand (d) Lagoonal sediments. The 2013 Phailin cyclon with wind speed of 220 kmph which was remnant cyclonic circulation from south china; it had major impact on geomorphology and sedimentology of odisha coast. At rushikulya river mouth, Ganjam district, cyclone had produced washover sand sheets as described in eyewitness along the river mouth of both north and south bar. The study reveals that the washover sand sheets provides the inundation of the water level, and characteristics of sediments where storm deposit has a highly variable grain-size distribution with a marked coarsening at its landward extent, is better sorted, coarser, and has a sharp, non-erosional lower contact associated with buried vegetation and soil. Also, the thickness of cyclone deposits are about 5 cm with the distance from coast 80 m, heavy mineral percentage ranges between 9 % to 75% for entire pit and sandsheets lateral extent are about 45 m. The presence of the laminations and alternate layers of heavy minerals are indicative of the complexity of sedimentation on the coast. The recent marine event Phailin cylcone deposits and 2004 tsunami deposits characteristic and

  9. Holocene depocenter migration and sediment accumulation in Delaware Bay: A submerging marginal marine sedimentary basin (United States)

    Fletcher, C. H.; Knebel, H.J.; Kraft, J.C.


    The Holocene transgression of the Delaware Bay estuary and adjacent Atlantic coast results from the combined effect of regional crustal subsidence and eustasy. Together, the estuary and ocean coast constitute a small sedimentary basin whose principal depocenter has migrated with the transgression. A millenial time series of isopach and paleogeographic reconstructions for the migrating depocenter outlines the basin-wide pattern of sediment distribution and accumulation. Upland sediments entering the basin through the estuarine turbidity maximum accumulate in tidal wetland or open water sedimentary environments. Wind-wave activity at the edge of the tidal wetlands erodes the aggraded Holocene section and builds migrating washover barriers. Along the Atlantic and estuary coasts of Delaware, the area of the upland environment decreases from 2.0 billion m2 to 730 million m2 during the transgression. The area of the tidal wetland environment increases from 140 million to 270 million m2, and due to the widening of the estuary the area of open water increases from 190 million to 1.21 billion m2. Gross uncorrected rates of sediment accumulation for the tidal wetlands decrease from 0.64 mm/yr at 6 ka to 0.48 mm/yr at 1 ka. In the open water environments uncorrected rates decrease from 0.50 mm/yr to 0.04 mm/yr over the same period. We also present data on total sediment volumes within the tidal wetland and open water environments at specific intervals during the Holocene. 

  10. Structural characteristics of marine sedimentary humic acids by CP/MAS sup(13)C NMR spectroscopy

    Digital Repository Service at National Institute of Oceanography (India)

    Sardessai, S.; Wahidullah, S.

    quino- nes or semiquinones which exhibit 13C resonance at around 195 ppm. Free radicals of semiquinone type have been reported from the aquatic environment [2]. Spectra of all the four samples show absorption at 195 ppm. The total acidity of marine..., significant resonance at 55 ppm (8.9) from aromatic methoxy carbon suggests that phenol is present mostly as methyl ether and not as free phenol. The signal at 55 ppm is also attributed to aliphatic carbon adjacent to the amino functional group as in amino...

  11. Study on origin and sedimentary environment of marine sediments from Kii Channel, Hiroshima Bay and Tosa Bay

    International Nuclear Information System (INIS)

    Suzuki, Misaki


    The trace amounts of elements in the sediments of sea bottom in Kii Channel, Hiroshima Bay and Tosa Bay were determined quantitatively by the neutron activation analysis. The following facts were illustrated particularly from the quantitative analysis of scandium, rare earths, thorium and uranium: 1) It was known from Ce/La ratio that the geological feature in the west part of Japan is reflected in Kii Channel, Hiroshima Bay and Tosa Bay; 2) The rare-earth element pattern and La/Lu ratio suggest the fact that Kii Channel, Hiroshima Bay and Tosa Bay are essentially composed of the materials of which origin is land; 3) From the fact that Ce/La ratio in these sites are slightly under 1.0, these sites are considered to be affected mainly by the materials of which origin is land; 4) The sedimentary environment in the marine bottom of the Japanese coasts has been found to be mostly under a reductive state. (M.H.)

  12. Assessing the potential of amino acid 13C patterns as a carbon source tracer in marine sediments: effects of algal growth conditions and sedimentary diagenesis (United States)

    Larsen, T.; Bach, L. T.; Salvatteci, R.; Wang, Y. V.; Andersen, N.; Ventura, M.; McCarthy, M. D.


    Burial of organic carbon in marine sediments has a profound influence in marine biogeochemical cycles and provides a sink for greenhouse gases such as CO2 and CH4. However, tracing organic carbon from primary production sources as well as its transformations in the sediment record remains challenging. Here we examine a novel but growing tool for tracing the biosynthetic origin of amino acid carbon skeletons, based on naturally occurring stable carbon isotope patterns in individual amino acids (δ13CAA). We focus on two important aspects for δ13CAA utility in sedimentary paleoarchives: first, the fidelity of source diagnostic of algal δ13CAA patterns across different oceanographic growth conditions, and second, the ability of δ13CAA patterns to record the degree of subsequent microbial amino acid synthesis after sedimentary burial. Using the marine diatom Thalassiosira weissflogii, we tested under controlled conditions how δ13CAA patterns respond to changing environmental conditions, including light, salinity, temperature, and pH. Our findings show that while differing oceanic growth conditions can change macromolecular cellular composition, δ13CAA isotopic patterns remain largely invariant. These results emphasize that δ13CAA patterns should accurately record biosynthetic sources across widely disparate oceanographic conditions. We also explored how δ13CAA patterns change as a function of age, total nitrogen and organic carbon content after burial, in a marine sediment core from a coastal upwelling area off Peru. Based on the four most informative amino acids for distinguishing between diatom and bacterial sources (i.e., isoleucine, lysine, leucine and tyrosine), bacterially derived amino acids ranged from 10 to 15 % in the sediment layers from the last 5000 years, and up to 35 % during the last glacial period. The greater bacterial contributions in older sediments indicate that bacterial activity and amino acid resynthesis progressed, approximately as a

  13. Seismic scattering attribute for sedimentary classification of nearshore marine quarries for a major beach nourishment project: Case study of Adriatic coastline, Regione Abruzzo (Italy) (United States)

    Orlando, Luciana; Contini, Paolo; De Girolamo, Paolo


    Of fundamental importance for any major beach nourishment project using marine quarries is a correct sedimentary classification. The main purpose of such a classification is to identify sand with the appropriate features for beach nourishment. This task is more onerous when quarry sediments are heterogeneous and mixed with silt. This is typical of nearshore marine quarries. The presence of excess silt compromises the use of marine quarries because of the water turbidity that may be induced in the nourished beaches, especially when the beaches are protected by defense structures. Here we discuss the use of scattering amplitude of seismic data, acquired with a pinger source (2-10 kHz), to detect and classify the unconsolidated sediment of a marine quarry. A robust correlation was found between this seismic attribute and the silt content in the sediment. The scattering amplitude was numerically calculated from the seismic data and used to map slices of silt content at different depths. The results have been validated with sedimentary analysis of vibra- and rotary cores, and by the dredged material used for the beach nourishment. The marine quarry produced about 1.200.000 m3 of sand used to nourish eight different beach sites along the Adriatic coasts of the Regione Abruzzo (Italy). The large-scale sedimentary assessment of the area was based on seismic boomer data and the evaluation of the volume of dredged sediments on multibeam data surveyed before and after the exploitation of the quarry. The study shows that this approach is effective in sites with high lateral and vertical variations in the percentage of sand in the sediments.

  14. A synthetic map of the north-west European Shelf sedimentary environment for applications in marine science (United States)

    Wilson, Robert J.; Speirs, Douglas C.; Sabatino, Alessandro; Heath, Michael R.


    Seabed sediment mapping is important for a wide range of marine policy, planning and scientific issues, and there has been considerable national and international investment around the world in the collation and synthesis of sediment datasets. However, in Europe at least, much of this effort has been directed towards seabed classification and mapping of discrete habitats. Scientific users often have to resort to reverse engineering these classifications to recover continuous variables, such as mud content and median grain size, that are required for many ecological and biophysical studies. Here we present a new set of 0.125° by 0.125° resolution synthetic maps of continuous properties of the north-west European sedimentary environment, extending from the Bay of Biscay to the northern limits of the North Sea and the Faroe Islands. The maps are a blend of gridded survey data, statistically modelled values based on distributions of bed shear stress due to tidal currents and waves, and bathymetric properties. Recent work has shown that statistical models can predict sediment composition in British waters and the North Sea with high accuracy, and here we extend this to the entire shelf and to the mapping of other key seabed parameters. The maps include percentage compositions of mud, sand and gravel; porosity and permeability; median grain size of the whole sediment and of the sand and the gravel fractions; carbon and nitrogen content of sediments; percentage of seabed area covered by rock; mean and maximum depth-averaged tidal velocity and wave orbital velocity at the seabed; and mean monthly natural disturbance rates. A number of applications for these maps exist, including species distribution modelling and the more accurate representation of sea-floor biogeochemistry in ecosystem models. The data products are available from

  15. A synthetic map of the north-west European Shelf sedimentary environment for applications in marine science

    Directory of Open Access Journals (Sweden)

    R. J. Wilson


    Full Text Available Seabed sediment mapping is important for a wide range of marine policy, planning and scientific issues, and there has been considerable national and international investment around the world in the collation and synthesis of sediment datasets. However, in Europe at least, much of this effort has been directed towards seabed classification and mapping of discrete habitats. Scientific users often have to resort to reverse engineering these classifications to recover continuous variables, such as mud content and median grain size, that are required for many ecological and biophysical studies. Here we present a new set of 0.125° by 0.125° resolution synthetic maps of continuous properties of the north-west European sedimentary environment, extending from the Bay of Biscay to the northern limits of the North Sea and the Faroe Islands. The maps are a blend of gridded survey data, statistically modelled values based on distributions of bed shear stress due to tidal currents and waves, and bathymetric properties. Recent work has shown that statistical models can predict sediment composition in British waters and the North Sea with high accuracy, and here we extend this to the entire shelf and to the mapping of other key seabed parameters. The maps include percentage compositions of mud, sand and gravel; porosity and permeability; median grain size of the whole sediment and of the sand and the gravel fractions; carbon and nitrogen content of sediments; percentage of seabed area covered by rock; mean and maximum depth-averaged tidal velocity and wave orbital velocity at the seabed; and mean monthly natural disturbance rates. A number of applications for these maps exist, including species distribution modelling and the more accurate representation of sea-floor biogeochemistry in ecosystem models. The data products are available from

  16. Meteoric 10Be/9Be ratios in marine sedimentary records: Deciphering the mixing between their marine and terrestrial sources and influence of costal trace metal fluxes (United States)

    Wittmann, H.; von Blanckenburg, F.; Mohtadi, M.; Christl, M.; Bernhardt, A.


    Meteoric 10Be to stable 9Be ratios combine a cosmogenic nuclide produced in the atmosphere at a rate known from reconstructions of magnetic field strength with a stable isotope that records the present and past continental weathering and erosion flux. In seawater, the 10Be/9Be ratio provides important information on metal release from bottom sediments, called boundary exchange, and the oceanic mixing of reactive trace metals due to the inherently different sources of the two isotopes. When measured in the authigenic phase of marine sediments, the 10Be/9Be ratio allows deriving the feedbacks between erosion, weathering, and climate in the geologic past. At an ocean margin site 37°S offshore Chile, we use the 10Be/9Be ratio to trace changes in terrestrial particulate composition due to exchange with seawater. We analyzed the reactive (sequentially extracted) phase of marine surface sediments along a coast-perpendicular transect, and compared to samples from their riverine source. We find evidence for growth of authigenic rims through co-precipitation, not via reversible adsorption, that incorporate an open ocean 10Be/9Be signature from a deep water source only 30 km from the coast, thereby overprinting terrestrial riverine 10Be/9Be signatures. We show that the measured 10Be/9Be ratios in marine sediments comprise a mixture between seawater-derived and riverine-sourced phases. As 10Be/9Be ratios increase due to exchange with seawater, particulate-bound Fe concentrations increase, which we attribute to release of Fe-rich pore waters during boundary exchange in the sediment. The implications for the use of 10Be/9Be in sedimentary records for paleo-denudation flux reconstructions are that in coast-proximal sites that are neither affected by deeper water nor by narrow boundary currents, the authigenic record will be a direct recorder of terrigenous denudation of the adjacent river catchments. Hence archive location and past oceanic circulation have to be accounted for

  17. A Three-Dimensional Model of the Marine Nitrogen Cycle during the Last Glacial Maximum Constrained by Sedimentary Isotopes

    Directory of Open Access Journals (Sweden)

    Christopher J. Somes


    Full Text Available Nitrogen is a key limiting nutrient that influences marine productivity and carbon sequestration in the ocean via the biological pump. In this study, we present the first estimates of nitrogen cycling in a coupled 3D ocean-biogeochemistry-isotope model forced with realistic boundary conditions from the Last Glacial Maximum (LGM ~21,000 years before present constrained by nitrogen isotopes. The model predicts a large decrease in nitrogen loss rates due to higher oxygen concentrations in the thermocline and sea level drop, and, as a response, reduced nitrogen fixation. Model experiments are performed to evaluate effects of hypothesized increases of atmospheric iron fluxes and oceanic phosphorus inventory relative to present-day conditions. Enhanced atmospheric iron deposition, which is required to reproduce observations, fuels export production in the Southern Ocean causing increased deep ocean nutrient storage. This reduces transport of preformed nutrients to the tropics via mode waters, thereby decreasing productivity, oxygen deficient zones, and water column N-loss there. A larger global phosphorus inventory up to 15% cannot be excluded from the currently available nitrogen isotope data. It stimulates additional nitrogen fixation that increases the global oceanic nitrogen inventory, productivity, and water column N-loss. Among our sensitivity simulations, the best agreements with nitrogen isotope data from LGM sediments indicate that water column and sedimentary N-loss were reduced by 17–62% and 35–69%, respectively, relative to preindustrial values. Our model demonstrates that multiple processes alter the nitrogen isotopic signal in most locations, which creates large uncertainties when quantitatively constraining individual nitrogen cycling processes. One key uncertainty is nitrogen fixation, which decreases by 25–65% in the model during the LGM mainly in response to reduced N-loss, due to the lack of observations in the open ocean most

  18. Assessing the potential of amino acid δ13C patterns as a carbon source tracer in marine sediments: effects of algal growth conditions and sedimentary diagenesis (United States)

    Larsen, T.; Bach, L. T.; Salvatteci, R.; Wang, Y. V.; Andersen, N.; Ventura, M.; McCarthy, M. D.


    Burial of organic carbon in marine sediments has a profound influence in marine biogeochemical cycles, and provides a sink for greenhouse gases such as CO2 and CH4. However, tracing organic carbon from primary production sources as well as its transformations in the sediment record remains challenging. Here we examine a novel but growing tool for tracing biosynthetic origin of amino acid carbon skeletons, based on natural occurring stable carbon isotope patterns in individual amino acids (δ13CAA). We focus on two important aspects for δ13CAA utility in sedimentary paleoarchives: first, the fidelity of source diagnostic of algal δ13CAA patterns across different oceanographic growth conditions; and second, the ability of δ13CAA patterns to record the degree of subsequent microbial amino acid synthesis after sedimentary burial. Using the marine diatom Thalassiosira weissflogii, we tested under controlled conditions how δ13CAA patterns respond to changing environmental conditions, including light, salinity, temperature, and pH. Our findings show that while differing oceanic growth conditions can change macromolecular cellular composition, δ13CAA isotopic patterns remain largely invariant. These results underscore that δ13CAA patterns should accurately record biosynthetic sources across widely disparate oceanographic conditions. We also explored how δ13CAA patterns change as a function of age, total nitrogen and organic carbon content after burial, in a marine sediment core from a coastal upwelling area off Peru. Based on the four most informative amino acids for distinguishing between diatom and bacterial sources (i.e. isoleucine, lysine, leucine and tyrosine), bacterial derived amino acids ranged from 10-15% in the sediment layers from the last 5000 years to 35% during the last glacial period. The larger bacterial fractions in older sediments indicate that bacterial activity and amino acid resynthesis progressed, approximately as a function of sediment age, to

  19. The Totumo mud volcano and its near-shore marine sedimentological setting (North Colombia) - From sedimentary volcanism to epithermal mineralization (United States)

    Dill, H. G.; Kaufhold, S.


    The Holocene mud volcano exposed at Totumo (younger than 4150 ± 50 yr BP) lines up together with some other landforms of its kind along the Caribbean Coast in northern Colombia. It currently vents a mud of the silicate-phosphate-bearing sulfur-sodium chloride type. The mud volcanoes evolved in an active continental margin setting of the South American Cordillera with high seismicity and affected by pervasive neotectonic structural disturbances. During the Neogene and Quaternary linear terrigenous shoreline sediments alternating with delta deposits evolved on this mobile crustal segment between the Andes and ancient Precambrian cratons. Meso- to microtidal sedimentary settings during transgression and progradation created meta- to instable sedimentary and petrophysical conditions (e.g. overpressure and gas-bearing bubble sands), favorable for the formation of mud volcanoes, whose lithofacies is subdivided into (1) footwall facies (detritus from metabasic, -pelitic source rocks), (2) mud volcano plus lateral facies (material from deep-seated hydrothermal sources, hydrocarbon plays, and brine reflux from the sea), (3) hanging wall facies, sand characterized by a strong longshore drift. The sedimentary volcanism in the area is characterized by different temperatures of formation: (1) pre-stage (oxides, garnet, alumosilicates, tourmaline, zircon, barite, Fe sulfides and -sulfates), light (Ca sulfates, calcite, quartz, feldspar) and clay minerals (kaolinite, mica, pyrophyllite, chlorite, vermiculite) are efficient tools to determine the source of mud, to subdivide the mud volcano system as to its facies and describe its physical-chemical regime as to the temperature of formation, pH and Eh values. The mud volcano system of Totumo bridges the gap between sedimentary "volcanism" and epithermal hot spring deposits of intermediate to high sulfidation and forms a useful "guide" to hydrocarbon accumulation.

  20. Supercritical sedimentary structures and bedforms and criteria for recognition in the field: insights from the Middle Eocene deep-marine Morillo and Guaso systems, Ainsa Basin, Spanish Pyrenees (United States)

    Torley, John; Pickering, Kevin


    It has long been acknowledged that for most submarine slopes with gradients > 0.5, common to many deep-water environments, they should contain abundant evidence of supercritical flows and their deposits. However, it is common for deep-marine sands/sandstones to be routinely modelled using the Bouma (1962) sequence for turbidites. Recently, the importance of supercritical flows has been highlighted from seafloor observations, with numerical and physical experiments. Such experiments have produced previously unrecognised bedforms which fail to be interpreted adequately by Bouma's model, including antidunes, chutes-and-pools, and cyclic steps. Fieldwork in the Middle Eocene Ainsa Basin, Spanish Pyrenees, has been undertaken in the Morillo and Guaso systems of the Upper Hecho Group. Approximately 5,000 beds were measured and documented in detail, e.g., grain size, sedimentary structures, bedforms and facies. Collectively, this data can be used to understand supercritical versus subcritical flow. The relative importance of supercritical flow can then be compared and contrasted within individual ancient deep-marine systems. The Morillo System is relatively coarse-grained, compared with the Guaso System. The results of this research contribute to an improved understanding of the processes in deep-marine systems, and directly benefit the hydrocarbon industry by providing better constraints to predict deep-water reservoir composition and architecture.

  1. Satellite retrieved cloud optical thickness sensitive to surface wind speed in the subarctic marine boundary layer

    International Nuclear Information System (INIS)

    Glantz, Paul


    The optical and microphysical properties of low level marine clouds, presented over the Norwegian Sea and Barents Sea, have been investigated for the period 2000-2006. The air masses were transported for more or less seven days over the warmer North Atlantic before they arrived at the area investigated. The main focus in this study is on investigating the relationship between cloud optical thickness (COT) and surface wind speed (U 10m ) using satellite retrievals in combination with operational meteorological data. A relatively strong correlation (R 2 = 0.97) is obtained for wind speeds up to 12 m s -1 , in air masses that were probably to a major degree influenced by wind shears and to a minor degree by buoyancy. The relationship (U 2.5 ) is also in between those most commonly found in the literature for water vapor (∼U 1 ) and sea salt (∼U 3.4 ). The present results highlight the magnitude of marine sea-spray influence on COT and their global climatic importance.

  2. 15N/14N variations in Cretaceous Atlantic sedimentary sequences: implication for past changes in marine nitrogen biogeochemistry (United States)

    Rau, G.H.; Arthur, M.A.; Dean, W.E.


    At two locations in the Atlantic Ocean (DSDP Sites 367 and 530) early to middle Cretaceous organic-carbon-rich beds ("black shales") were found to have significantly lower ??15N values (lower 15N/14N ratios) than adjacent organic-carbon-poor beds (white limestones or green claystones). While these lithologies are of marine origin, the black strata in particular have ??15N values that are significantly lower than those previously found in the marine sediment record and most contemporary marine nitrogen pools. In contrast, black, organic-carbon-rich beds at a third site (DSDP Site 603) contain predominantly terrestrial organic matter and have C- and N-isotopic compositions similar to organic matter of modern terrestrial origin. The recurring 15N depletion in the marine-derived Cretaceous sequences prove that the nitrogen they contain is the end result of an episodic and atypical biogeochemistry. Existing isotopic and other data indicate that the low 15N relative abundance is the consequence of pelagic rather than post-depositional processes. Reduced ocean circulation, increased denitrification, and, hence, reduced euphotic zone nitrate availability may have led to Cretaceous phytoplankton assemblages that were periodically dominated by N2-fixing blue-green algae, a possible source of this sediment 15N-depletion. Lack of parallel isotopic shifts in Cretaceous terrestrially-derived nitrogen (Site 603) argues that the above change in nitrogen cycling during this period did not extend beyond the marine environment. ?? 1987.

  3. Marine sedimentary environments on some parts of the tropical and equatorial Atlantic margins of Africa during the Late Quaternary (United States)

    Barusseau, J. P.; Giresse, P.; Faure, H.; Lezine, A. M.; Masse, J. P.


    From 18,000 y B.P. up to the Present, major climatic changes combined with eustatic sea-level irregular rise controlled important variations in sedimentary conditions on the Atlantic African margin between 6°S and 21°N. The present shelf deposition of material is also controlled by climatic latitudinal gradients acting on the nature, volume and distribution of terrigenous and carbonate sediments. The evolution of sedimentary conditions during this period may be summarized as follows. Coastal terrigenous deposition Fluvial sands were emplaced in inner shelf paleo-valleys during the beginning of the Wiscon sinian regression, following a major erosion phase providing an important source for the siliciclastic part of the terrigenous influx. In tropical regions (Mauritania, Senegal), aeolian dune sands formed during the arid "glacial" period (the so-called Ogolian) on the emerged shelf, but were destroyed during the subsequent transgression. In the vicinity and south of the Equator (Coˆte d'Ivoire, Congo), aeolian input was reduced but litoral dunes of that period occurred whose remnants may be observed close to the present shoreline. At the lower stand of sea level, fine particles directly by-passed the shelf towards the continental rises and abyssal plains. During the Holocene transgression, the main sedimentary processes occurred only when standstill or slowing of the sea-level rise took place. Then littoral deposits (fine sands of the shore, dune sands and even lagoonal deposits with mangrove peats) accumulated still more or less visible paleo-shorelines. However, offshore from the equatorial river mouths, particularly the main ones (Congo), pelitic sediments settled in morphological and structural lows. High sedimentation rates were common at the beginning but they decreased during the final part of the transgression. In the tropical region terrigenous fluvial input is considerably reduced but, in their northernmost parts, aeolian contribution of silts and

  4. Natural abundances of /sup 15/N as a source indicator for near-shore marine sedimentary and dissolved nitrogen

    Energy Technology Data Exchange (ETDEWEB)

    Sweeney, R E; Kaplan, I R [California Univ., Los Angeles (USA). Inst. of Geophysics and Planetary Physics


    The nitrogen isotope ratios of 42 sediment samples of total nitrogen and 38 dissolved pore-water ammonium samples from Santa Barbara Basin sediment cores were measured. The range of delta/sup 15/N values for total nitrogen was +2.89 to +9.4 per thousand with a mean of +6.8 per thousand and for pore water ammonium, +8.2 to +12.4 per thousand with a mean of 10.2 per thousand. The results suggest that the dissolved ammonium in the pore water is produced from bacterial degradation of marine organic matter. The range of delta /sup 15/N values for total nitrogen in the sediment is interpreted as resulting from an admixture of nitrogen derived from marine (+10 per thousand) and terrestrial (+2 per thousand) cores. The marine component of this mixture, composed principally of calcium carbonate with smaller amounts of opal and organic matter, contains approximately 1.0% nitrogen. The terrestrial component, which comprises over 80% of the sediment, contains approximately 0.1% organically bound nitrogen and accounts for > 25% of the total nitrogen in Santa Barbara Basin sediment.

  5. The last 1000 years of ocean change in Monterey Bay, California: insights from the marine sedimentary record (United States)

    Schwartz, V.; Addison, J. A.; Carlin, J.; Wagner, A. J.; Barron, J. A.


    In Monterey Bay, seasonal upwelling of cold nutrient-rich waters from the California Current sustains a diverse and abundant marine phytoplankton community, serving as the base of the local marine ecosystem, and contributing to atmospheric CO2 fixation. The response of this productive area to future climate change remains uncertain, thus this study looks to examine the Monterey Bay sediment record over the last millennia to provide perspective on future changes. To accomplish this, we examined biogenic sediment as a proxy for upwelling. While there is no existing sea surface temperature (SST) record for this time frame in Monterey Bay as an independent proxy of upwelling, we compare our data against the Santa Barbara Basin (SBB) alkenone SST record, and the global PAGES Ocean2K SST synthesis products to examine variability associated with the Medieval Climate Anomaly (MCA), the Little Ice Age (LIA), and the recent onset of industrial-era warming. Utilizing a pair of newly acquired sediment cores from the southern nearshore sector of Monterey Bay, PS1410-08GC (36.42°N, 121.54°W, depth 85 m) and PS1410-09GC (36.46°N, 121.51°W, depth 71 m), we performed sedimentological and geochemical analyses including multi-sensor core logging, computerized tomography (CT) scans, X-ray fluorescence (XRF), biogenic silica (opal), and HCNS elemental analysis. Age control for each core was determined by linearly interpolating basal 14C dates, and both sites represent high sedimentation rate areas (PS1410-08GC: 0.75 mm/yr, PS1410-09GC: 1.2 mm/yr). Despite being from a highly productive region, both cores contain relatively low concentrations of TOC, opal, and CaCO3, with total mean biogenic fractions of 7.38% and 6.67% for PS1410-08GC and -09GC, respectively, indicating significant terrigenous input throughout both records. Both cores show a decrease in bulk density and an increase in biogenic material from the MCA into the LIA at 1500 CE. A sharp increase in Monterey Bay bulk

  6. Lower Tertiary Sedimentary Turbidite Facies at the Chicontepec Basin, East-Central Mexico

    Directory of Open Access Journals (Sweden)

    Santillán-Piña N.


    Full Text Available The study area comprises the northwestern portion of the Chicontepec Basin at southeastern San Luis Potosí and northeastern Hidalgo States. At the stratigraphy sequences of the Chicontepec Formation from Lower Paleocene in isolated outocrops, were herein interpreted two major sedimentary sub-environments into the fan model: the middle and the external sedimentary settings; the applied criteria for their identification were: (a lithostratigraphic (thickness, geometry and distribution; (b internal and external primary sedimentary structures, and (c intra-formational deformation structures. The sedimentary facies are composed of siliciclastic and calcareous particles sourced from the Sierra Madre Oriental, western; the Tuxpan paleo-island, eastern; and from the Teziutlan Massif, southern; the sediments were massively transported by slideing, slumping, flow debris and turbidity currents, then deposited as massive, tabular, lenticular and lobely in shape at the slope foot and on the sea marine floor.

  7. Thickness of the oligo-neogene sedimentary cover in the Central Depression, northern Chile (Pampa del Tamarugal, 20°45'-21°30'S), based on seismic reflection (United States)

    Garcia, M.; Simicic, Y.; Contreras Reyes, E.; Charrier, R.


    The estimation of the Pampa de Tamarugal oligo-neogene sedimentary cover thickness from seismic interpretation is crucial for scientific and applied subjects, such as placing aquifers traps and Mesozoic-Paleogene basement top location for mining exploration drilling. The Chilean National Petroleum Company (ENAP) has explored hydrocarbon resources in the area, raising several reflection seismic lines and drilling some wells. Previous studies used the paper seismic data by determining the cover geometry and defining the basement-cover boundary. We have obtained directly SGY digital files, which allow a better definition and modeling of stratigraphy and cover thickness. This thickness was estimated by the travel time in the seismic reflection lines and the value of the p-wave propagation velocity (0.91 to 1.97 km/s for cover). The last value was obtained by density measurements of field samples, which resulted from 1,895 to 2,065 g/cm3. In the central-south part of the Pampa del Tamarugal, immediately south of Cerro Challacollo, the west-east-oriented 99_7 seismic line shows a 'basement high' whose top is at 100 m from the surface. The basement was uplift by a north-trend west-verging reverse fault and separates two sub-basins of 9.5 km and 13.8 km wide, and maximum cover thicknesses of 600 and 850 m, west and east respectively. To the north of Cerro Challacollo, the subparallel 99_6 line shows a similar geometry, and increasing the depth of the basement high top up to 350 m in the central part of the section. For seismic lines south of Cerro Challacollo, the basement high disappears and the cover thickness increases. To improve the accuracy of the cover thickness estimations, we will test directly measurements of p-wave propagation velocity in field samples of basement and cover (instead of approximations from the density measurements).

  8. Sedimentary thickness and velocity in the northeast boundary of the Parana Basin with Andean earthquakes and local events; Espessura e velocidade das camadas sedimentares na borda nordeste da Bacia do Parana utilizando telessismos da regiao andina e sismos locais

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Josimar A.; Souza, Luiz M. [Universidade de Sao Paulo (USP), SP (Brazil). Dept. de Geofisica; Assumpcao, Marcelo S. [Universidade de Sao Paulo (USP), SP (Brazil)


    Deep Andean earthquakes are a suitable source of high-frequency P-waves (with good signal to noise ratio up to {approx} 10 Hz) that can be used to obtain high-resolution receiver functions at stations in intra-cratonic basins in Brazil. Receiver functions (Gaussian width 20) at five stations in the Bebedouro seismic area (NE Parana Basin) were calculated using the time domain deconvolution of Ligorria and Ammon (1999). Inter-station Rayleigh wave phase velocities were measured using local earthquakes. Joint inversion of receiver functions and Rayleigh phase velocities provided reasonably well constrained S-wave velocity profiles. Shallow seismic refraction surveys were used to fix the velocities of the surface layers during the inversion. The area is characterized by a thin surface layer of sandstones ({approx}60 m), followed by a {approx}500 m thick basalt layer. Beneath the basalts, low-velocity layers define another sedimentary sequence. These features are consistent with the expected values based on well data at regional distances and confirm the usefulness of high-frequency receiver functions to study sedimentary basins. (author)

  9. Surface treatment systems for concrete in marine environment: Effect of concrete cover thickness

    Directory of Open Access Journals (Sweden)

    Marcelo Henrique Farias de Medeiros

    Full Text Available Abstract There are some ways to extend the service life of a reinforced concrete structure. This paper focuses on the extension of the service life by treating the surface of reinforced concrete, specifically on the effect of the concrete cover thickness on the surface treatment system efficacy. Thus, chloride migration tests were performed and diffusion chloride coefficients were calculated. The service life of each case (treated or non-treated concrete was estimated using these data and Fick's second law of diffusion. Results indicated that the thicker the concrete cover is, the greater the efficacy of the concrete surface treatment system will be. The dissemination of this information is important, since it is almost intuitive to think that the effect of a surface treatment system depends only on itself and this study shows the opposite.

  10. Sedimentary history and economic geology of San Juan Basin, New Mexico and Colorado

    International Nuclear Information System (INIS)

    Peterson, J.A.; LeLeit, A.J.; Spencer, C.W.; Ullrich, R.A.


    The San Juan Basin contains up to 15,000 ft of sedimentary rocks ranging in age from Cambrian to Recent. The earliest development of the area as a sedimentary basin or trough apparently took place in Pennsylvanian time, and the basin was maintained, with changing rates of subsidence and filling, through the remainder of geologic time. During the Early Paleozoic, sedimentation was dominated by marine transgressions across the northwestern flank of the regional Transcontinental Arch. The Late Paleozoic history was strongly influenced by tectonism related to development of the Ancestral Rocky Mountains Uplifts and associated downwarping. The Early Mesozoic is characterized by fluvial and eolian environments, interrupted periodically by thin marine transgressive deposits of nearshore redbeds. The final Mesozoic event was the widespread Late Cretaceous marine transgression which deposited a thick cyclic sequence of marine gray shale and sandstone, with interbedded coal. Late Tertiary regional uplift and resulting volcanism were accompanied by a regional dissection of the area by stream systems that evolved into the present drainage pattern of superposed streams. The sedimentary history is directly related to the occurrence of economic deposits in the basin. Major reserves of petroleum and gas are in Cretaceous and Pennsylvanian rocks, coal in Cretaceous, and uranium in Jurassic and Cretaceous. Abstract only

  11. Integration of airborne altimetry and in situ radar measurements to estimate marine ice thickness beneath the Larsen C ice shelf, Antarctic Peninsula (United States)

    McGrath, D.; Steffen, K.; Rodriguez Lagos, J.


    Observed atmospheric and oceanic warming is driving significant retreat and / or collapse of ice shelves along the Antarctic Peninsula totaling over 25,000 km2 in the past five decades. Basal melting of meteoric ice can occur near the grounding line of deep glacier inflows if the ocean water is above the pressure melting point. Buoyant meltwater will develop thermohaline circulation, rising beneath the ice shelf, where it may become supercooled and subsequently refreeze in ice draft minima. Marine ice, due to its warm and thus relatively viscous nature, is hypothesized to suture parallel flow bands, increasing ice shelf stability by arresting fracture propagation and controlling iceberg calving dimensions. Thus efforts to model ice shelf stability require accurate estimates of marine ice location and thickness. Ice thickness of a floating ice shelf can be determined in two manners: (1) from measurements of ice elevation above sea level and the calculation of ice thickness from assumptions of hydrostatic equilibrium, and (2) from radar echo measurements of the ice-water interface. Marine ice can confound the latter because its high dielectric constant and strong absorptive properties attenuate the radar energy, often preventing a return signal from the bottom of the ice shelf. These two methods are complementary for determining the marine ice component though because positive anomalies in (1) relative to (2) suggest regions of marine ice accretion. Nearly 350 km of ice penetrating radar (25 MHz) surveys were collected on the Larsen C ice shelf, in conjunction with kinematic GPS measurements and collocated with surface elevation data from the NASA Airborne Topographic Mapper (ATM) as part of the ICE Bridge mission in 2009. Basal ice topography and total ice thickness is accurately mapped along the survey lines and compared with calculated ice thickness from both the kinematic GPS and ATM elevation data. Positive anomalies are discussed in light of visible imagery and

  12. Sedimentary condensation and authigenesis (United States)

    Föllmi, Karl


    Most marine authigenic minerals form in sediments, which are subjected to condensation. Condensation processes lead to the formation of well individualized, extremely thin ( 100ky), and which experienced authigenesis and the precipitation of glaucony, verdine, phosphate, iron and manganese oxyhydroxides, iron sulfide, carbonate and/or silica. They usually show complex internal stratigraphies, which result from an interplay of sediment accumulation, halts in sedimentation, sediment winnowing, erosion, reworking and bypass. They may include amalgamated faunas of different origin and age. Hardgrounds may be part of condensed beds and may embody strongly condensed beds by themselves. Sedimentary condensation is the result of a hydrodynamically active depositional regime, in which sediment accumulation, winnowing, erosion, reworking and bypass are processes, which alternate as a function of changes in the location and intensity of currents, and/or as the result of episodic high-energy events engendered by storms and gravity flow. Sedimentary condensation has been and still is a widespread phenomenon in past and present-day oceans. The present-day distribution of glaucony and verdine-rich sediments on shelves and upper slopes, phosphate-rich sediments and phosphorite on outer shelves and upper slopes, ferromanganese crusts on slopes, seamounts and submarine plateaus, and ferromanganese nodules on abyssal seafloors is a good indication of the importance of condensation processes today. In the past, we may add the occurrence of oolitic ironstone, carbonate hardgrounds, and eventually also silica layers in banded iron formations as indicators of the importance of condensation processes. Besides their economic value, condensed sediments are useful both as a carrier of geochemical proxies of paleoceanographic and paleoenvironmental change, as well as the product of episodes of paleoceanographic and paleoenvironmental change themselves.

  13. The structure and stratigraphy of the sedimentary succession in the Swedish sector of the Baltic Basin: New insights from vintage 2D marine seismic data (United States)

    Sopher, Daniel; Erlström, Mikael; Bell, Nicholas; Juhlin, Christopher


    We present five interpreted regional seismic profiles, describing the full sedimentary sequence across the Swedish sector of the Baltic Sea. The data for the study are part of an extensive and largely unpublished 2D seismic dataset acquired between 1970 and 1990 by the Swedish Oil Prospecting Company (OPAB). The Baltic Basin is an intracratonic basin located in northern Europe. Most of the Swedish sector of the basin constitutes the NW flank of a broad synclinal depression, the Baltic Basin. In the SW of the Swedish sector lies the Hanö Bay Basin, formed by subsidence associated with inversion of the Tornquist Zone during the Late Cretaceous. The geological history presented here is broadly consistent with previously published works. We observe an area between the Hanö Bay and the Baltic Basin where the Palaeozoic strata has been affected by transpression and subsequent inversion, associated with the Tornquist Zone during the late Carboniferous-Early Permian and Late Cretaceous, respectively. We propose that the Christiansø High was a structural low during the Late Jurassic, which was later inverted in the Late Cretaceous. We suggest that a fan shaped feature in the seismic data, adjacent to the Christiansø Fault within the Hanö Bay Basin, represents rapidly deposited, coarse-grained sediments eroded from the inverted Christiansø High during the Late Cretaceous. We identify a number of faults within the deeper part of the Baltic Basin, which we also interpret to be transpressional in nature, formed during the Caledonian Orogeny in the Late Silurian-Early Devonian. East of Gotland a number of sedimentary structures consisting of Silurian carbonate reefs and Ordovician carbonate mounds, as well as a large Quaternary glacial feature are observed. Finally, we use the seismic interpretation to infer the structural and stratigraphic history of the Baltic and Hanö Bay basins within the Swedish sector.

  14. Tectono-sedimentary controls on the likelihood of gas hydrate occurrence near Taiwan

    Energy Technology Data Exchange (ETDEWEB)

    McDonnell, S.L.; Cherkis, N.Z.; Czarnecki, M.F. [Naval Research Lab., Washington, DC (United States); Max, M.D. [MDS Research, Washington, DC (United States)


    Marine sediments on the continental slope of the NE South China Sea have appropriate thickness, methane-generating potential, and occur in a suitable pressure-temperature regime to host gas hydrate. Evidence for gas hydrate, the bottom simulating reflector (BSR), is observed to the south of Taiwan on reflection seismic records, and can be used to suggest that gas hydrates are widely distributed. The tectono-sedimentary framework south of Taiwan bears directly upon methane generation and the likelihood of the presence of significant gas hydrate deposits. Three zones of probable hydrate occurrence have been delineated along the margins of the NE South China Sea: (1) in a thick accumulation of sediment along the northern passive margin; (2) along a more thinly sedimented eastern active collisional margin, and especially; (3) in a zone of thick originally passive margin sedimentation into which the collisional margin has encroached obliquely. (author)

  15. Geochemistry of sedimentary carbonates

    National Research Council Canada - National Science Library

    Morse, John W; Mackenzie, Fred T


    .... The last major section is two chapters on the global cycle of carbon and human intervention, and the role of sedimentary carbonates as indicators of stability and changes in Earth's surface environment...

  16. Trace fossils and sedimentary facies from a Late Cambrian‐Early Ordovician tide‐dominated shelf (Santa Rosita Formation, northwest Argentina): Implications for ichnofacies models of shallow marine successions (United States)

    Mángano, M. Gabriela; Buatois, Luis A.; Aceñolaza, Guillermo F.


    The Santa Rosita Formation is one the most widely distributed lower Paleozoic units of northwest Argentina. At the Quebrada del Salto Alto section, east of Purmamarca, Jujuy Province, it is represented by four sedimentary facies: thick‐bedded planar cross‐stratified quartzose sandstones (A), thin‐bedded planar cross‐stratified quartzose sandstones and mudstones (B), wave‐rippled sandstones and bioturbated mudstones (C), and black and greenish gray shales (D). Paleocurrent data, sandstone architecture, and sedimentary structures from faciès A and B indicate bipolar/bimodal paleoflows, suggesting the action of tidal currents. The succession is interpreted as that of a tide‐dominated shelf, with only secondary influence of wave processes. Trace fossils are restricted to facies B and C.The Cruziana ichnocoenosis is preserved on the soles of thin‐bedded planar cross‐stratified quartzose sandstones (faciès B). This ichnocoenosis consists of Conostichus isp., Cruziana omanica, C. semiplicata, C. cf. tortworthi, Cruziana isp. Helminthopsis abeli, Monomorphichnus bilinearis, M. multilineatus, Palaeophycus tubularis, Rusophycus carbonarias, R. latus, and R. isp. The occurrence of Cruziana semiplicata, C. omanica, C. cf. tortworthi, and Rusophycus latus supports a Late Cambrian‐Tremadoc age. Slabbing of Cruziana shows complex interactions between biologic and sedimentologic processes, and suggests a predominance of exhumed traces, washed out and recast by tractive sand deposition. Sandstone soles are densely packed with biogenic structures and exhibit distinctive clusters of Rusophycus isp. that most likely represent trilobite nesting burrows. The Cruziana ichnocoenosis records the resident fauna of a protected, lower intertidal to subtidal interbar setting.The Skolithos ichnocoenosis is represented by high to low density vertical burrows of Skolithos linearis, which extend downwards to the quartzose sandstone soles of faciès B and

  17. Monitoring the sedimentary carbon in an artificially disturbed deep-sea sedimentary environment

    Digital Repository Service at National Institute of Oceanography (India)

    Nath, B.N.; Khadge, N.H.; Nabar, S.; Raghukumar, C.; Ingole, B.S.; Valsangkar, A.B.; Sharma, R.; Srinivas, K.

    1 Author version: Environ. Monit. Assess., vol.184; 2012; 2829-2844 Monitoring the sedimentary carbon in an artificially disturbed deep-sea sedimentary environment B. Nagender Nath * , N.H. Khadge, Sapana Nabar, C. Raghu Kumar, B.S. Ingole... community two years after an artificial rapid deposition event. Publication of Seto Marine Biological Laboratory, 39(1), 17-27. Gage, J.D. (1978). Animals in deep-sea sediments. Proceedings of Royal Society of Edinburgh, 768, 77-93. Gage, J.D., & Tyler...

  18. Sedimentary record of erg migration (United States)

    Porter, M. L.


    The sedimentary record of erg (eolian sand sea) migration consists of an idealized threefold division of sand-sea facies sequences. The basal division, here termed the fore-erg, is composed of a hierarchy of eolian sand bodies contained within sediments of the flanking depositional environment. These sand bodies consist of eolian strata deposited by small dune complexes, zibars, and sand sheets. The fore-erg represents the downwind, leading edge of the erg and records the onset of eolian sedimentation. Basin subsidence coupled with erg migration places the medial division, termed the central erg, over the fore-erg strata. The central erg, represented by a thick accumulation of large-scale, cross-stratified sandstone, is the product of large draa complexes. Eolian influence on regional sedimentation patterns is greatest in the central erg, and most of the sand transported and deposited in the erg is contained within this region. Reduction in sand supply and continued erg migration will cover the central-erg deposits with a veneer of back-erg deposits. This upper division of the erg facies sequence resembles closely the fore-erg region. Similar types of eolian strata are present and organized in sand bodies encased in sediments of the upwind flanking depositional environment(s). Back-erg deposits may be thin due to limited eolian influence on sedimentation or incomplete erg migration, or they may be completely absent because of great susceptibility to postdepositional erosion. Tectonic, climatic, and eustatic influences on sand-sea deposition will produce distinctive variations or modifications of the idealized erg facies sequence. The resulting variants in the sedimentary record of erg migration are illustrated with ancient examples from western North America, Europe, southern Africa, and South America.

  19. Sedimentary Processes. Quantification Using Radionuclides

    International Nuclear Information System (INIS)

    Carroll, J.; Lerche, I.


    The advent of radionuclide methods in geochronology has revolutionized our understanding of modern sedimentary processes in aquatic systems. This book examines the principles of the method and its use as a quantitative tool in marine geology, with emphasis on the Pb-210 method. The assumptions and consequences of models and their behaviour are described providing the necessary background to assess the advantages and trade-offs involved when choosing a particular model for application. One of the purposes of this volume is to disentangle the influences of complicating factors, such as sediment flux variations, post-depositional diffusion of radionuclides, and bio-irrigation of sediments, to arrive at sediment ages and to properly assess the attendant data uncertainty. Environmental impacts of chemical, nuclear, or other waste material are of concern in a variety of areas around the world today. A number of relevant examples are included, demonstrating how dating models are useful for determining sources of contaminants and interpreting their influence on the environment. The book is set at a level so that an able student or professional should have no difficulty in following the procedures and methods developed. Each chapter includes case histories showing the strengths and weaknesses of a given procedure with respect to a data example. Included with this volume is the computer source code of a new generation of modelling tools based on inverse numerical analysis techniques. This first generation of the modelling tool is included, along with detailed instructions and examples for its use, in an appendix

  20. Granulometric analyses of pelites using a sedigraph: Examples from a Volcano-sedimentary environment

    Digital Repository Service at National Institute of Oceanography (India)

    Mascarenhas, A.

    This article presents granulometric data of pelites (less than 40 microns) of mixed composition from a volcano-sedimentary environment. The sedigraph serves as an useful tool in the analyses of silt-clay fraction of marine sediments. A cumulative...

  1. Compaction and sedimentary basin analysis on Mars (United States)

    Gabasova, Leila R.; Kite, Edwin S.


    Many of the sedimentary basins of Mars show patterns of faults and off-horizontal layers that, if correctly understood, could serve as a key to basin history. Sediment compaction is a possible cause of these patterns. We quantified the possible role of differential sediment compaction for two Martian sedimentary basins: the sediment fill of Gunjur crater (which shows concentric graben), and the sediment fill of Gale crater (which shows outward-dipping layers). We assume that basement topography for these craters is similar to the present-day topography of complex craters that lack sediment infill. For Gunjur, we find that differential compaction produces maximum strains consistent with the locations of observed graben. For Gale, we were able to approximately reproduce the observed layer orientations measured from orbiter image-based digital terrain models, but only with a >3 km-thick donut-shaped past overburden. It is not immediately obvious what geologic processes could produce this shape.

  2. Sedimentary Petrology: from Sorby to the globalization of Sedimentary Geology

    International Nuclear Information System (INIS)

    Alonso-Zarza, A. M.


    We describe here the most important milestones and contributions to Sedimentary Petrology compared to other geological disciplines. We define the main aim of our study and the scientific and economic interests involved in Sedimentary Petrology. The body of the paper focuses upon the historical development of this discipline from Henry Sorby's initial work until the present day. The major milestones in its history include: 1) initial descriptive works; 2) experimental studies; 3) the establishment of the different classifications of sedimentary rocks; 4) studies into facies and sedimentary environments; 5) advances in the study of diagenetic processes and their role in hydrocarbon prospection; and 6) the development of Sedimentary Geochemistry. Relationships and coincidences with Sedimentology are discussed. We go on to look at the advances that have taken place over the last 30 years, in which the study of sedimentary rocks is necessarily included in the wider field of Sedimentary Geology as a logical result of the proposal of global models of a changing Earth in which Sedimentary Geology plays a significant part. Finally we mention the notable contributions of Spanish sedimentary petrologists to this whole field of science. (Author) 120 refs.


    Directory of Open Access Journals (Sweden)

    G. I. Leychenkov


    Full Text Available In early February 2012, the drill hole at the Vostok Station encountered theLakeVostokwater. This step is important to study the lake composition including possible microbial life and to model subglacial environments however, the next ambitious target of the Vostok Drilling Project is sampling of bottom sediments, which contain the unique record of ice sheet evolution and environmental changes in centralAntarcticafor millions of years. In this connection, the forecast of sedimentary succession based on existing geophysical data, study of mineral inclusions in the accretion ice cores and tectonic models is important task. Interpretation of Airborne geophysical data suggests thatLakeVostokis the part of spacious rift system, which exists at least from Cretaceous. Reflection and refraction seismic experiments conducted in the southern part ofLakeVostokshow very thin (200–300 m stratified sedimentary cover overlying crystalline basement with velocity of 6.0–6.2 km/s. At present, deposition in southernLakeVostokis absent and similar conditions occurred likely at least last3 m.y. when ice sheet aboveLakeVostokchanged insignificantly. It can be also inferred that from the Late Miocene the rate of deposition inLakeVostokwas extremely low and so the most of sedimentary section is older being possibly of Oligocene to early to middle Miocene age when ice sheet oscillated and deposition was more vigorous. If so, the sampling of upper few meters of this condensed section is very informative in terms of history of Antarctic glaciation. Small thickness of sedimentary cover raises a question about existence of lake (rift depression during preglacial and early glacial times.

  4. Mining of sedimentary-type ore deposits

    International Nuclear Information System (INIS)

    Bruha, J.; Slovacek, T.; Berka, J.; Sadilek, P.


    A procedure is proposed for mining sedimentary-type ore deposits, particularly uranium deposits, using the stope-pillar technique. The stope having been mined out, the free room is filled with hydro-setting gob from the surface. A precondition for the application of this technique is horizontal ore mineralization in sediments where the total thickness of the mineralized ore layer is at least 3 to 5 m. Mining losses do not exceed 5%. For thicknesses greater than 5 m, the roof is reinforced and the walls are secured with netting. The assets of the technique include higher labor productivity of the driving, lower material demands in reinforcing and filling, lower power consumption, and reduced use of explosives. (Z.S.). 3 figs

  5. Dichotomy Boundary at Aeolis Mensae, Mars: Fretted Terrain Developed in a Sedimentary Deposit (United States)

    Irwin, R. P., III; Watters, T. R.; Howard, A. D.; Maxwell, T. A.; Craddock, R. A.


    Fretted terrain in Aeolis Mensae, Mars, developed in a sedimentary deposit. A thick, massive unit with a capping layer or duricrust overlies a more durable layered sequence. Wind, collapse, and minor fluvial activity contributed to degradation.

  6. Sedimentary Geology Context and Challenges for Cyberinfrastructure Data Management (United States)

    Chan, M. A.; Budd, D. A.


    A cyberinfrastructure data management system for sedimentary geology is crucial to multiple facets of interdisciplinary Earth science research, as sedimentary systems form the deep-time framework for many geoscience communities. The breadth and depth of the sedimentary field spans research on the processes that form, shape and affect the Earth's sedimentary crust and distribute resources such as hydrocarbons, coal, and water. The sedimentary record is used by Earth scientists to explore questions such as the continental crust evolution, dynamics of Earth's past climates and oceans, evolution of the biosphere, and the human interface with Earth surface processes. Major challenges to a data management system for sedimentary geology are the volume and diversity of field, analytical, and experimental data, along with many types of physical objects. Objects include rock samples, biological specimens, cores, and photographs. Field data runs the gamut from discrete location and spatial orientation to vertical records of bed thickness, textures, color, sedimentary structures, and grain types. Ex situ information can include geochemistry, mineralogy, petrophysics, chronologic, and paleobiologic data. All data types cover multiple order-of-magnitude scales, often requiring correlation of the multiple scales with varying degrees of resolution. The stratigraphic framework needs dimensional context with locality, time, space, and depth relationships. A significant challenge is that physical objects represent discrete values at specific points, but measured stratigraphic sections are continuous. In many cases, field data is not easily quantified, and determining uncertainty can be difficult. Despite many possible hurdles, the sedimentary community is anxious to embrace geoinformatic resources that can provide better tools to integrate the many data types, create better search capabilities, and equip our communities to conduct high-impact science at unprecedented levels.

  7. Fluvial systems and their sedimentary models

    Directory of Open Access Journals (Sweden)

    Dragomir Skabeme


    Full Text Available The Slovenian géomorphologie and sedimentologie terminology for fluvial depositional environments is not established yet. Therefore a classification and the proposal for Slovenian names of fluvial sedimentary and erosional forms and influences controlling them are discussed. Attention is given to the problems of recognition of sedimentary environments in sedimentary rocks, and to fluvial sedimentary models.

  8. Western Canada Sedimentary Basin competitiveness

    International Nuclear Information System (INIS)

    Millar, R.H.G.


    Recent dramatic expansion of the natural gas industry in the Western Canada Sedimentary Basin provided ample proof of the potential of this area for further development of natural gas supply. However, the inherent competitive advantages provided by the Western Canada Sedimentary Basin were said to have been offset by low netback prices resulting in poor producer economics when competitiveness is measured by availability of opportunities to find and develop gas supply at costs low enough to ensure attractive returns. Technology was identified as one of the key elements in improving basin competitiveness, but the greatest potential lies in reduced transportation costs and increased access to North American market centres. 8 figs

  9. Stratigraphy of neoproterozoic sedimentary and volcano sedimentary successions of Uruguay

    International Nuclear Information System (INIS)

    Pecoits, E.; Aubet, N.; Oyhantcabal, P.; Sanchez Bettucci, L.


    Based on the new data the different characteristics of the Neoproterozoic (volcano) sedimentary succesions of Uruguay are described and discussed. Their stratigraphic tectonics and palaeoclimatic implications are analyzed.The results of the present investigations also allow to define the Maldonado Group which would beintegrated by the Playa Hermosa and Las Ventanas formations.

  10. Marine geology of the St. Lawrence Estuary

    Energy Technology Data Exchange (ETDEWEB)

    St-Onge, Guillaume [Canada Research Chair in Marine Geology, Institut des sciences de la mer de Rimouski (ISMER) and GEOTOP Research Center, 310 allee des Ursulines, Rimouski, Quebec, G5L 3A1 (Canada); Duchesne, Mathieu J [Geological Survey of Canada, Quebec Division, 490 de la Couronne, Quebec City, Quebec, G1K 9A9 (Canada); Lajeunesse, Patrick, E-mail: [Departement de geographie and Centre d' etudes nordiques, Universite Laval, Quebec City, Quebec, G1V 0A6 (Canada)


    The St. Lawrence Estuary, Eastern Canada, contains a very thick (>450 m) Quaternary sedimentary sequence. The results from recently conducted geophysical surveys in conjunction with piston coring indicate that these sediments were deposited under very high sedimentation rates, sometimes as high as {approx}30 m/ka during the last deglaciation. Results also reveal evidence of large submarine landslides during the Holocene, changes in sedimentation rates and the significant role of submarine canyons and channels to transfer sediments from the coast to the deeper marine environment. Finally, this paper highlights the presence of more than 1900 pockmarks on the seafloor of the St. Lawrence Estuary and discusses their possible origins: active hydrocarbon seeps in the Laurentian Channel and biogenic gas seepage on the northwestern shoulder of the Laurentian Channel.

  11. Marine geology of the St. Lawrence Estuary

    International Nuclear Information System (INIS)

    St-Onge, Guillaume; Duchesne, Mathieu J; Lajeunesse, Patrick


    The St. Lawrence Estuary, Eastern Canada, contains a very thick (>450 m) Quaternary sedimentary sequence. The results from recently conducted geophysical surveys in conjunction with piston coring indicate that these sediments were deposited under very high sedimentation rates, sometimes as high as ∼30 m/ka during the last deglaciation. Results also reveal evidence of large submarine landslides during the Holocene, changes in sedimentation rates and the significant role of submarine canyons and channels to transfer sediments from the coast to the deeper marine environment. Finally, this paper highlights the presence of more than 1900 pockmarks on the seafloor of the St. Lawrence Estuary and discusses their possible origins: active hydrocarbon seeps in the Laurentian Channel and biogenic gas seepage on the northwestern shoulder of the Laurentian Channel.

  12. Sedimentary structures of tidal flats

    Indian Academy of Sciences (India)

    Sedimentary structures of some coastal tropical tidal flats of the east coast of India, and inner estuarine tidal point bars located at 30 to 50 kilometers inland from the coast, have been extensively studied under varying seasonal conditions. The results reveal that physical features such as flaser bedding, herringbone ...

  13. Isotopegeochemical investigations and dating on minerals and fossils from sedimentary rocks: 1. Glauconites from Jura, Molasse and Helveticum (K-Ar, Rb-Sr), 2. 87Sr/86Sr-Isotope stratigraphy on marine and limnetic micro- and macro-fossils, 3. Primary minerals from tertiary bentonites and tuffs (U-Pb, K-Ar)

    International Nuclear Information System (INIS)

    Fischer, H.


    Glauconite investigations: the main problem in dating glauconites lies in the identification of authigenic minerals which have not been influenced by post-sedimentary processes. The age determination on glauconites from the three different tectonic units: the Jura mountains, the molasse basin and the Helvetic nappes, yield inconsistent results. Up to 35% too young K-Ar ''ages'' of glauconites from limestones from the Helvetic nappes can be traced to partial Ar loss caused by sediment-lithification and tectonic events. Sr-isotope stratigraphy: multiple analyses of recent samples from the Mediterranean Sea and from the North Atlantic show that the 87 Sr/ 86 Sr isotope ratios correspond well. In a stratigraphic ideal section from the Upper marine molasse a resolution of 206 Pb/ 238 U method zircons from the Fish Canyon Tuff were measured and yielded ages of 28.49±0.10, 24.46±0.11 and 28.46±0.13 Ma. These values correspond well with the published mean value of zircon and apatite fission track age of 28.4±0.7 Ma. Thus, the U-Pb method for dating young volcanic minerals seems to be suitable. However, the published mean value (''solid state age'') of Naeser et al. (1981) is higher than the published (''gas age'') mean value of 27.2±0.7 Ma based on biotite, sanidine, hornblende and plagioclase. (author) figs., tabs., refs

  14. Sedimentary basin analysis and petroleum potential of the Cretaceous and Tertiary strata in Korea.

    Energy Technology Data Exchange (ETDEWEB)

    Son, Jin-Dam; Kwak, Young-Hoon; Bong, Pil-Yoon [Korea Institute of Geology Mining and Materials, Taejon (KR)] (and others)


    Since 1992 sedimentary basin analysis to assess petroleum potential of the Cretaceous and Tertiary strata in the Korean onshore and continental shelf have been carried out. The Cretaceous non-marine strata mainly occupy the Gyeongsang Basin in southeastern part of the Korean Peninsula and small basins such as Haenam and Gyeokpo depressions in western coastal areas. The Tertiary strata are mostly distributed in Domi, Cheju, Socotra subbasins, and Okinawa Trough in the South Continental Shelf, and Kunsan and Heuksan basins in the West. The basin evolution and petroleum potential for each basins are characterized as follow. The Cretaceous Gyeongsang sediments were deposited in three subbasins including Milyang, Euisung and Yongyang subbasins. The black shales in Nakdong and Jinju formations are interpreted to contain abundant organic matter during the deposition, thermal maturity reaching up to the zone of dry gas formation. Because porosity and permeability are too low, the sandstones can act as a tight gas reservoir rather than conventional oil and gas reservoir. The latest Cretaceous strata of Haenam and Kyeokpo depressions in western coastal area are correlated into the Yuchon Volcanic Group of the Gyeongsang Basin. Petroleum potential of the Early Cretaceous basin in the West Continental Shelf could be relatively high in terms of sedimentary basin filled with thick lacustrine sediments. The Kunsan basin in the West Continental Shelf originated in the Early Cretaceous time expanded during the Paleocene time followed by regional erosion at the end of Paleocene on which Neogene sediment have been accumulated. The Paleocene-Eocene sublacustrine shales may play an major role as a source and cap rocks. South Continental Shelf Basin is subdivided by Cheju subbasin in the center, Socotra Subbasin to the west, Domi Subbasin to the northeast and Okinawa Trough to the East. The potential hydrocarbon traps associated with anticline, titled fault blocks, fault, unconformity

  15. Investigating Coccolithophorid Biology in the Sedimentary Laboratory (United States)

    McClelland, H. L. O.; Barbarin, N.; Beaufort, L.; Hermoso, M.; Rickaby, R. E. M.


    Coccolithophores are the ocean's dominant calcifying phytoplankton; they play an important, but poorly understood, role in long-term biogeochemical climatic feedbacks. Calcite producing marine organisms are likely to calcify less in a future world where higher carbon dioxide concentrations will lead to ocean acidification (OA), but coccolithophores may be the exception. In coccolithophores calcification occurs in an intracellular vesicle, where the site of calcite precipitation is buffered from the external environment and is subject to a uniquely high degree of biological control. Culture manipulation experiments mimicking the effects of OA in the laboratory have yielded empirical evidence for phenotypic plasticity, competition and evolutionary adaptation in asexual populations. However, the extent to which these results are representative of natural populations, and of the response over timescales of greater than a few hundred generations, is unclear. Here we describe a new sediment-based proxy for the PIC:POC (particulate inorganic to particulate organic carbon ratio) of coccolithophore biomass, which is equivalent to the fractional energy contribution to calcification at constant pH, and a biologically meaningful measure of the organism's tendency to calcify. Employing the geological record as a laboratory, we apply this proxy to sedimentary material from the southern Pacific Ocean to investigate the integrated response of real ancient coccolithophore populations to environmental change over many thousands of years. Our results provide a new perspective on phenotypic change in real populations of coccolithophorid algae over long timescales.

  16. Microfacies, sedimentary environment and diagenesis of the upper part of Dalan and Kangan Formations in the Kuh-e Surmeh area, Folded Zagros

    Directory of Open Access Journals (Sweden)

    Mohammadhossein Adabi


    Full Text Available The upper part of Dallan and Kangan formations (Permian-Triassic, are located in the Kuh-e Surmeh area in folded Zagros Basin with a thickness of 325 m overlying by Nar evaporite member and underlying by Dashtak Formation. Dominant lithology of these formations are limestone and dolomite. Our purpose in this study is to identify microfacieses, sedimentary environment and diagenetic proceses. To overcome this aim, thin sections petrographic studies, leaded to identify 12 microfacieses related to 4 facieses belt: tidal flat, lagoon, shoal and open marine. The observed microfacies patterns indicate a ramp carbonate platform as depositional environment. Based on petrographic studies, the important diagenetic processes in these formations consist of: micritization, dolomitization, cementation, stilolitization and chemical and physical compactions. Burial diagenesis is dominated diagenetic event. The observed porosities in this section are primary and secondary such as fenestral, vuggy, fracture, moldic, interparticle, intraparticle and channel

  17. Thick Toenails (United States)

    ... in individuals with nail fungus (onychomycosis), psoriasis and hypothyroidism. Those who have problems with the thickness of their toenails should consult a foot and ankle surgeon for proper diagnosis and treatment. Find an ACFAS Physician Search Search Tools Find ...

  18. Origin, evolution and sedimentary processes associated with a late Miocene submarine landslide, southeast Spain (United States)

    Sola, F.; Puga-Bernabéu, Á.; Aguirre, J.; Braga, J. C.


    A submarine landslide, the Alhama de Almería Slide, influenced late Tortonian and early Messinian (late Miocene) sedimentary processes in the vicinity of Alhama de Almería in southeast Spain. Its 220-m-high headscarp and deposits are now subaerially exposed. The landslide occurred at the northern slope of the antecedent relief of the present-day Sierra de Gádor mountain range. This is a large antiform trending east-west to east-northeast-west-southwest, which has been uplifting since the late Miocene due to convergence of the African and Eurasian plates. During the Tortonian, this relief was an island separated from the Iberian Peninsula mainland by the Alpujarra corridor, a small and narrow intermontane basin of the Betic Cordillera in the western Mediterranean Sea. The materials involved in the slope failure were Triassic dolostones and phyllites from the metamorphic Alpujárride Complex and Tortonian marine conglomerates, sandstones, and marls that formed an initial sedimentary cover on the basement rocks. Coherent large masses of metamorphic rocks and Miocene deposits at the base of the headscarp distally change to chaotic deposits of blocks of different lithologies embedded in upper Tortonian marine marls, and high-strength cohesive debrites. During downslope sliding, coherent carbonate blocks brecciated due to their greater strength. Phyllites disintegrated, forming a cohesive matrix that engulfed and/or sustained the carbonate blocks. Resedimented, channelized breccias were formed by continuing clast collision, bed fragmentation, and disaggregation of the failed mass. The conditions leading to rock/sediment failure were favoured by steep slopes and weak planes at the contact between the basement carbonates and phyllites. Displacement of collapsed rocks created a canyon-like depression at the southeast edge of the landslide. This depression funnelled sediment gravity flows that were generated upslope, promoting local thick accumulations of sediments during

  19. Global Drainage Patterns to Modern Terrestrial Sedimentary Basins and its Influence on Large River Systems (United States)

    Nyberg, B.; Helland-Hansen, W.


    Long-term preservation of alluvial sediments is dependent on the hydrological processes that deposit sediments solely within an area that has available accomodation space and net subsidence know as a sedimentary basin. An understanding of the river processes contributing to terrestrial sedimentary basins is essential to fundamentally constrain and quantify controls on the modern terrestrial sink. Furthermore, the terrestrial source to sink controls place constraints on the entire coastal, shelf and deep marine sediment routing systems. In addition, the geographical importance of modern terrestrial sedimentary basins for agriculture and human settlements has resulted in significant upstream anthropogenic catchment modification for irrigation and energy needs. Yet to our knowledge, a global catchment model depicting the drainage patterns to modern terrestrial sedimentary basins has previously not been established that may be used to address these challenging issues. Here we present a new database of 180,737 global catchments that show the surface drainage patterns to modern terrestrial sedimentary basins. This is achieved by using high resolution river networks derived from digital elevation models in relation to newly acquired maps on global modern sedimentary basins to identify terrestrial sinks. The results show that active tectonic regimes are typically characterized by larger terrestrial sedimentary basins, numerous smaller source catchments and a high source to sink relief ratio. To the contrary passive margins drain catchments to smaller terrestrial sedimentary basins, are composed of fewer source catchments that are relatively larger and a lower source to sink relief ratio. The different geomorphological characteristics of source catchments by tectonic setting influence the spatial and temporal patterns of fluvial architecture within sedimentary basins and the anthropogenic methods of exploiting those rivers. The new digital database resource is aimed to help

  20. Sedimentary architecture and chronostratigraphy of a late Quaternary incised-valley fill: A case study of the late Middle and Late Pleistocene Rhine system in the Netherlands (United States)

    Peeters, J.; Busschers, F. S.; Stouthamer, E.; Bosch, J. H. A.; Van den Berg, M. W.; Wallinga, J.; Versendaal, A. J.; Bunnik, F. P. M.; Middelkoop, H.


    This paper describes the sedimentary architecture, chronostratigraphy and palaeogeography of the late Middle and Late Pleistocene (Marine Isotope Stage/MIS 6-2) incised Rhine-valley fill in the central Netherlands based on six geological transects, luminescence dating, biostratigraphical data and a 3D geological model. The incised-valley fill consists of a ca. 50 m thick and 10-20 km wide sand-dominated succession and includes a well-developed sequence dating from the Last Interglacial: known as the Eemian in northwest Europe. The lower part of the valley fill contains coarse-grained fluvio-glacial and fluvial Rhine sediments that were deposited under Late Saalian (MIS 6) cold-climatic periglacial conditions and during the transition into the warm Eemian interglacial (MIS 5e-d). This unit is overlain by fine-grained fresh-water flood-basin deposits, which are transgressed by a fine-grained estuarine unit that formed during marine high-stand. This ca. 10 m thick sequence reflects gradual drowning of the Eemian interglacial fluvial Rhine system and transformation into an estuary due to relative sea-level rise. The chronological data suggests a delay in timing of regional Eemian interglacial transgression and sea-level high-stand of several thousand years, when compared to eustatic sea-level. As a result of this glacio-isostatic controlled delay, formation of the interglacial lower deltaic system took only place for a relative short period of time: progradation was therefore limited. During the cooler Weichselian Early Glacial period (MIS 5d-a) deposition of deltaic sediments continued and extensive westward progradation of the Rhine system occurred. Major parts of the Eemian and Weichselian Early Glacial deposits were eroded and buried as a result of sea-level lowering and climate cooling during the early Middle Weichselian (MIS 4-3). Near complete sedimentary preservation occurred along the margins of the incised valley allowing the detailed reconstruction presented

  1. Discussion on the origin of sedimentary rock resistivity

    International Nuclear Information System (INIS)

    Dong Gangjian


    Conduction current way of sedimentary rock sedimentary rock is caused by the internal structure of sedimentary rock sedimentary rock pore resistance depends on the salinity of pore water and clay content and distribution. Resistivity of sedimentary rock sedimentary rock major factor in mineral composition, water resistance, oil resistance. and sedimentary structures. In practice, we should give full attention to the difference between lithology and physical properties. (author)

  2. Deformation style of the Mesozoic sedimentary rocks in southern Thailand (United States)

    Kanjanapayont, Pitsanupong


    Mesozoic sedimentary rocks in southern Thailand are widespread from NNE-SSW and N-S in Chumphon and Trang provinces. The Mesozoic stratigraphic units are the marine Triassic Sai Bon Formation and the non-marine Jurassic-Cretaceous Thung Yai Group, the latter subdivided into Khlong Min, Lam Thap, Sam Chom, and Phun Phin Formations. These units overlie Permian carbonate rocks with an angular unconformity, and are overlain unconformably by Cenozoic units and the Quaternary sediments. The Mesozoic rocks have been folded to form two huge first-ordered syncline or synclinoria, the Chumphon and Surat Thani-Krabi-Trang synclinoria. These synclinoria are elongated in NNE-SSW to N-S direction, and incorporate asymmetric lower-order parasitic folds. The folds have moderately to steeply dipping eastward limbs and more gently dipping westward limbs. These folds were transected by brittle fractures in four major directions. These geologic structures indicate WNW-ESE to E-W contraction with top-to-the-east simple shear at some time before the deposition of the Cenozoic sedimentary units. No major deformation has affected the rocks subsequently, apart from the formation of the fault-controlled Cenozoic basins.

  3. Marine benthic faunal successional stages and related sedimentary activity

    Directory of Open Access Journals (Sweden)

    Rutger Rosenberg


    Full Text Available This paper is a brief review of successional stages and activity of benthic soft-bottom communities. Benthic communities was first described by Petersen in the 1910s and further developed by Molander, Thorson and Margalef. Successional stages of benthic communities chance in a predictable way in relation to environmental disturbance and food availability. Food supply to the bottom can occur as a vertical flux, but transport through lateral advection is more important in some areas. While at the bottom, the infauna processes the food in many different ways, and the feeding modes can be categorised into more than 20 functional groups, but fewer are present in brackish water. This categorisation is based on animal mobility and where and how they ingest the food. Animal activity in the sediment, bioturbation, has a significant effect on redox conditions and diagenetic processes. Structures in the sediment due to infaunal presence and activity can be observed in situ by sediment profile imaging, and the biogenic structures and redox conditions can be parameterised and have been shown to correlate to benthic community successional stages. The largest threat to benthic faunal biodiversity is the spread of near-bottom oxygen deficiency in many enclosed are stratified coastal areas.

  4. Chapter D: With or Without Salt-a Comparison of Marine and Continental-Lacustrine Diatomite Deposits (United States)

    Moyle, Phillip R.; Dolley, Thomas P.


    Diatoms in sedimentary deposits of marine and continental, especially lacustrine, origin have similar nutrient (for example, phosphate, nitrate, and silica) and light requirements; however, their geologic ranges and physiographic environments vary. Marine diatoms range in age from Early Cretaceous to Holocene, and continental diatoms range in age from Eocene to Holocene; however, most commercial diatomites, both marine and lacustrine, were deposited during the Miocene. Marine deposits of commercial value generally accumulated along continental margins with submerged coastal basins and shelves where wind-driven boundary currents provided the nutrient-rich upwelling conditions capable of supporting a productive diatom habitat. Commercial freshwater diatomite deposits occur in volcanic terrains associated with events that formed sediment-starved drainage basins, such as the Basin and Range Province, particularly in Nevada. Marine habitats generally are characterized by stable conditions of temperature, salinity, pH, nutrients, and water currents, in contrast to lacustrine habitats, which are characterized by wide variations in these conditions. Marine deposits generally are of higher quality and contain larger resources, owing to their greater areal extent and thickness, whereas most of the world's known diatomites are of lacustrine origin. Both types of deposit are commonly mined by open-pit methods and subjected to processing designed to remove organic matter, CO2, pore water, and inorganic contaminants in order to produce purified products. The highest quality diatomites, predominantly from marine sources, are used in filtration, although both types of deposit produce filter grades, and additional end uses include fillers, additives, absorbents, and abrasives.

  5. The onset of fabric development in deep marine sediments

    NARCIS (Netherlands)

    Maffione, Marco; Morris, Antony


    Post-depositional compaction is a key stage in the formation of sedimentary rocks that results in porosity reduction, grain realignment and the production of sedimentary fabrics. The progressive time-depth evolution of the onset of fabric development in deep marine sediments is poorly constrained

  6. Scotland's forgotten carbon: a national assessment of mid-latitude fjord sedimentary carbon stocks

    Directory of Open Access Journals (Sweden)

    C. Smeaton


    Full Text Available Fjords are recognised as hotspots for the burial and long-term storage of carbon (C and potentially provide a significant climate regulation service over multiple timescales. Understanding the magnitude of marine sedimentary C stores and the processes which govern their development is fundamental to understanding the role of the coastal ocean in the global C cycle. In this study, we use the mid-latitude fjords of Scotland as a natural laboratory to further develop methods to quantify these marine sedimentary C stores on both the individual fjord and national scale. Targeted geophysical and geochemical analysis has allowed the quantification of sedimentary C stocks for a number of mid-latitude fjords and, coupled with upscaling techniques based on fjord classification, has generated the first full national sedimentary C inventory for a fjordic system. The sediments within these mid-latitude fjords hold 640.7 ± 46 Mt of C split between 295.6 ± 52 and 345.1 ± 39 Mt of organic and inorganic C, respectively. When compared, these marine mid-latitude sedimentary C stores are of similar magnitude to their terrestrial equivalents, with the exception of the Scottish peatlands, which hold significantly more C. However, when area-normalised comparisons are made, these mid-latitude fjords are significantly more effective as C stores than their terrestrial counterparts, including Scottish peatlands. The C held within Scotland's coastal marine sediments has been largely overlooked as a significant component of the nation's natural capital; such coastal C stores are likely to be key to understanding and constraining improved global C budgets.

  7. Scotland's forgotten carbon: a national assessment of mid-latitude fjord sedimentary carbon stocks (United States)

    Smeaton, Craig; Austin, William E. N.; Davies, Althea L.; Baltzer, Agnes; Howe, John A.; Baxter, John M.


    Fjords are recognised as hotspots for the burial and long-term storage of carbon (C) and potentially provide a significant climate regulation service over multiple timescales. Understanding the magnitude of marine sedimentary C stores and the processes which govern their development is fundamental to understanding the role of the coastal ocean in the global C cycle. In this study, we use the mid-latitude fjords of Scotland as a natural laboratory to further develop methods to quantify these marine sedimentary C stores on both the individual fjord and national scale. Targeted geophysical and geochemical analysis has allowed the quantification of sedimentary C stocks for a number of mid-latitude fjords and, coupled with upscaling techniques based on fjord classification, has generated the first full national sedimentary C inventory for a fjordic system. The sediments within these mid-latitude fjords hold 640.7 ± 46 Mt of C split between 295.6 ± 52 and 345.1 ± 39 Mt of organic and inorganic C, respectively. When compared, these marine mid-latitude sedimentary C stores are of similar magnitude to their terrestrial equivalents, with the exception of the Scottish peatlands, which hold significantly more C. However, when area-normalised comparisons are made, these mid-latitude fjords are significantly more effective as C stores than their terrestrial counterparts, including Scottish peatlands. The C held within Scotland's coastal marine sediments has been largely overlooked as a significant component of the nation's natural capital; such coastal C stores are likely to be key to understanding and constraining improved global C budgets.

  8. Geologic processes and sedimentary system on Mars

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, A S


    The subject is covered under following headings: (1) morphology and processes at the martian surface (impact craters, water and ice, landslide, aeolian processes, volcanism, chemical weathering); (2) the sedimentary system (martian geologic documentation, sedimentary balance, regolith, pyroclastics, erosion phenomena, deposit and loss of sediments) as well as (3) summary and final remarks. 72 refs.

  9. Imaging the Moho beneath Sedimentary Basins: A Comparative Study of Virtual Deep Seismic Sounding (VDSS) and P Wave Receiver Functions (PRF) (United States)

    Liu, T.; Klemperer, S. L.; Yu, C.; Ning, J.


    In the past decades, P wave receiver functions (PRF) have been routinely used to image the Moho, although it is well known that PRFs are susceptible to contamination from sedimentary multiples. Recently, Virtual Deep Seismic Sounding (VDSS) emerged as a novel method to image the Moho. However, despite successful applications of VDSS on multiple datasets from different areas, how sedimentary basins affect the waveforms of post-critical SsPmp, the Moho reflection phase used in VDSS, is not widely understood. Here, motivated by a dataset collected in the Ordos plateau, which shows distinct effects of sedimentary basins on SsPmp and Pms waveforms, we use synthetic seismograms to study the effects of sedimentary basins on SsPmp and Pms, the phases used in VDSS and PRF respectively. The results show that when the sedimentary thickness is on the same order of magnitude as the dominant wavelength of the incident S wave, SsPmp amplitude decreases significantly with S velocity of the sedimentary layer, whereas increasing sedimentary thickness has little effect in SsPmp amplitude. Our explanation is that the low S velocity layer at the virtual source reduces the incident angle of S wave at the free surface, thus decreases the S-to-P reflection coefficient at the virtual source. In addition, transmission loss associated with the bottom of sedimentary basins also contributes to reducing SsPmp amplitude. This explains not only our observations from the Ordos plateau, but also observations from other areas where post-critical SsPmp is expected to be observable, but instead is too weak to be identified. As for Pms, we observe that increasing sedimentary thickness and decreasing sedimentary velocities both can cause interference between sedimentary multiples and Pms, rendering the Moho depths inferred from Pms arrival times unreliable. The reason is that although Pms amplitude does not vary with sedimentary thickness or velocities, as sedimentary velocities decrease and thickness

  10. Shallow Sedimentary Structure of the Brahmaputra Valley Constraint from Receiver Functions Analysis (United States)

    Saikia, Sowrav; Chopra, Sumer; Baruah, Santanu; Singh, Upendra K.


    In this study, receiver functions from ten Broadband seismograph stations on Cenozoic sediment formations of Brahmaputra valley and its neighboring region in northeastern part of India are determined. Receiver function traces from this region show delay in peak by 1-2.5 s and associated minor peaks with the direct P-phase peak. Based on such observation, we try to image sedimentary structure of the Brahmaputra valley plain, adjacent Shillong plateau and Himalayan foredeep region. An adapted hybrid global waveform inversion technique has been applied to extract sedimentary basin structure beneath each site. The sedimentary cover of the basin is about 0.5-6.5 km thick across the valley, 0.5-1.0 km on Shillong plateau and 2.0-5.0 km in nearby foredeep region. We have found that sedimentary thickness increases from SW to NE along the Brahmaputra valley and towards the Eastern Himalayan syntaxes. The estimated sediment thickness and S wave velocity structure agree well with the results of previous active source, gravity, and deep borehole studies carried out in this region. The thick crustal low velocity sediment cover in Brahmaputra valley is expected to amplify ground motions during earthquakes and therefore important for seismic hazard assessment of the region.

  11. Rare earth elements and neodymium isotopes in sedimentary organic matter (United States)

    Freslon, Nicolas; Bayon, Germain; Toucanne, Samuel; Bermell, Sylvain; Bollinger, Claire; Chéron, Sandrine; Etoubleau, Joel; Germain, Yoan; Khripounoff, Alexis; Ponzevera, Emmanuel; Rouget, Marie-Laure


    We report rare earth element (REE) and neodymium (Nd) isotope data for the organic fraction of sediments collected from various depositional environments, i.e. rivers (n = 25), estuaries (n = 18), open-ocean settings (n = 15), and cold seeps (n = 12). Sedimentary organic matter (SOM) was extracted using a mixed hydrogen peroxide/nitric acid solution (20%-H2O2-0.02 M-HNO3), after removal of carbonate and oxy-hydroxide phases with dilute hydrochloric acid (0.25 M-HCl). A series of experimental tests indicate that extraction of sedimentary organic compounds using H2O2 may be complicated occasionally by partial dissolution of sulphide minerals and residual carbonates. However, this contamination is expected to be minor for REE because measured concentrations in H2O2 leachates are about two-orders of magnitude higher than in the above mentioned phases. The mean REE concentrations determined in the H2O2 leachates for samples from rivers, estuaries, coastal seas and open-ocean settings yield relatively similar levels, with ΣREE = 109 ± 86 ppm (mean ± s; n = 58). The organic fractions leached from cold seep sediments display even higher concentration levels (285 ± 150 ppm; mean ± s; n = 12). The H2O2 leachates for most sediments exhibit remarkably similar shale-normalized REE patterns, all characterized by a mid-REE enrichment compared to the other REE. This suggests that the distribution of REE in leached sedimentary organic phases is controlled primarily by biogeochemical processes, rather than by the composition of the source from which they derive (e.g. pore, river or sea-water). The Nd isotopic compositions for organic phases leached from river sediments are very similar to those for the corresponding detrital fractions. In contrast, the SOM extracted from marine sediments display εNd values that typically range between the εNd signatures for terrestrial organic matter (inferred from the analysis of the sedimentary detrital fractions) and marine organic matter

  12. Modeling the Sedimentary Infill of Lakes in the East African Rift: A Case Study of Multiple versus Single Rift Basin Segments (United States)

    Zhang, C.; Scholz, C. A.


    The sedimentary basins in the East African Rift are considered excellent modern examples for investigating sedimentary infilling and evolution of extensional systems. Some lakes in the western branch of the rift have formed within single-segment systems, and include Lake Albert and Lake Edward. The largest and oldest lakes developed within multi-segment systems, and these include Lake Tanganyika and Lake Malawi. This research aims to explore processes of erosion and sedimentary infilling of the catchment area in single-segment rift (SSR) and multi-segment rift (MSR) systems. We consider different conditions of regional precipitation and evaporation, and assess the resulting facies architecture through forward modeling, using state-of-the-art commercial basin modeling software. Dionisos is a three-dimensional numerical stratigraphic forward modeling software program, which simulates basin-scale sediment transport based on empirical water- and gravity-driven diffusion equations. It was classically used to quantify the sedimentary architecture and basin infilling of both marine siliciclastic and carbonate environments. However, we apply this approach to continental rift basin environments. In this research, two scenarios are developed, one for a MSR and the other for a SSR. The modeled systems simulate the ratio of drainage area and lake surface area observed in modern Lake Tanganyika and Lake Albert, which are examples of MSRs and SSRs, respectively. The main parameters, such as maximum subsidence rate, water- and gravity-driven diffusion coefficients, rainfall, and evaporation, are approximated using these real-world examples. The results of 5 million year model runs with 50,000 year time steps show that MSRs are characterized by a deep water lake with relatively modest sediment accumulation, while the SSRs are characterized by a nearly overfilled lake with shallow water depths and thick sediment accumulation. The preliminary modeling results conform to the features

  13. Classification and sedimentary characteristics of lacustrine hyperpycnal channels: Triassic outcrops in the south Ordos Basin, central China (United States)

    Xian, Benzhong; Wang, Junhui; Gong, Chenglin; Yin, Yu; Chao, Chuzhi; Liu, Jianping; Zhang, Guodong; Yan, Qi


    Subaquatic channels are known as active conduits for the delivery of terrigenous sediments into related marine and lacustrine basins, as well as important targets for hydrocarbon exploration. Compared to submarine channels, lacustrine subaqueous channels created by hyperpycnal flows are understudied. Using well-exposed outcrops collected from three different locations in the southern Ordos Basin, central China, morphologies and architecture of a channelized hyperpycnal system were studied and classified. Six facies associations represent sedimentary processes from strong erosion by bedload dominated hyperpycnal flows, to transitional deposition jointly controlled by bedload and suspended-load dominated hyperpycnal flows, finally to deposition from suspended-load dominated hyperpycnal flows. On the basis of channel morphologies, infilling sediments and sedimentary processes, the documented channels can be classified into four main categories, which are erosional, bedload dominated, suspended-load dominated, and depositional channels. In very proximal and very distal locations, erosional channels and depositional channels serve as two end-members, while in middle areas, bedload-dominated channels and suspended-load dominated channels are transitional types. Erosional channels, as a response to strong erosion from bedload dominated hyperpycnal flows on upper slope, were mainly filled by mud interbedded with thin sand beds. As flow energy decreases, bedload dominated channels develop on middle slopes, which are characterized mainly by under- to balanced sediment infillings with cross-bedded sandstones and/or minor massive sandstones. Compared to bedload dominated channels, suspended-load dominated channels mainly develop in deeper water, and were filled mainly by massive or planar-laminated sandstones. Depositional channels, as a response to suspended-load dominated hyperpycnal flows in deep-water areas, are characterized by thin-medium bed classical turbidites with

  14. 2 - 4 million years of sedimentary processes in the Labrador Sea: implication for North Atlantic stratigraphy (United States)

    Mosher, D. C.; Saint-Ange, F.; Campbell, C.; Piper, D. J.


    Marine sedimentary records from the western North Atlantic show that a significant portion of sediment deposited since the Pliocene originated from the Canadian Shield. In the Labrador Sea, previous studies have shown that bottom currents .strongly influenced sedimentation during the Pliocene, while during the Quaternary, intensification of turbidity current flows related to meltwater events were a dominant factor in supplying sediment to the basin and in the development of the North Atlantic Mid-Ocean Channel (NAMOC). Despite understanding this general pattern of sediment flux, details regarding the transfer of sediment from the Labrador Shelf to deep water and from the Labrador Sea to the North Atlantic remain poorly understood. Our study focuses on sedimentary processes occurring along the Labrador margin since the Pliocene and their consequences on the margin architecture, connection to the NAMOC, and role in sediment flux from the Labrador basin to the Sohm Abyssal Plain. Piston core and high resolution seismic data reveal that during the Pliocene to mid Pleistocene, widespread slope failures led to mass transport deposition along the entire Labrador continental slope. After the mid Pleistocene, sedimentation along the margin was dominated by the combined effects of glaciation and active bottom currents. On the shelf, prograded sedimentary wedges filled troughs and agraded till sheets form intervening banks. On the slope, stacked glaciogenic fans developed seaward of transverse troughs between 400 and 2800 mbsl. On the lower slope, seismic data show thick sediment drifts capped by glacio-marine mud. This unit is draped by well stratified sediment and marks a switch from a contourite dominated regime to a turbidite dominated regime. This shift occurred around 0.5 - 0.8 ka and correlates to the intensification of glaciations. Late Pleistocene sediments on the upper slope consist of stratified sediments related to proglacial plume fall-out. Coarse grained

  15. Volcaniclastic and sedimentary deposits in Late Oligocene/Early Miocene Smrekovec Volcanic Complex, northern Slovenia (United States)

    Kralj, Polona


    Late Oligocene/Early Miocene volcanic activity in northern Slovenia is related to post-collisional accommodation of continental Apulian and oceanic European plates (von Blanckenburg and Davis, 1996). It occurred in one of small south-western marginal depressions of the Pannonian basin system, locally termed the Smrekovec Basin (Hanfland et al., 2004). Contemporaneous clastic sedimentation is evidenced by several hundred metres thick succession composed mainly of mudstone, siltstone and sand. Smrekovec Volcanic Complex (SVC) is an eroded and tectonically uplifted remain of a larger submarine stratovolcano edifice, built of lavas, shallow or subsurface intrusive bodies, and pyroclastic, hyaloclastic, syn-eruptively resedimented volcaniclastic and reworked volcaniclastic-sedimentary deposits (Kralj, 1996). The development of lithofacies of syn-eruptively resedimented deposits is controlled by the proximity to the ancient volcano summit and the volcano sloping. Moreover, close to the rising volcano edifice, distinct shallow-water environments with siliciclastic sedimentation developed. Syn-eruptively resedimented deposits are the most widespread and are related to volcaniclastic debris flows and volcaniclastic tubidity flows. Volcaniclastic debris flow deposits are subdivided into lithofacies Bx - polymict volcaniclastic breccia, and Bt - volcaniclastic tuff-breccia. Bx occurs as tabular, up to some ten metres thick bodies with abundant up to 5 dm large angular lava clasts and angular or rounded clasts of fine-grained tuff, and tuffaceous matrix. Bt forms basal, massive layers in fining-upward sequences. The main constituent is tuffaceous matrix; up to 1.5 dm large clasts of lavas and tuffs are subordinate. In a distance up to 2 km from the former volcano summit (proximal area), Bt predominates in the sequence lithofacies composition (~75 %), and attains a thickness of up to 4 m. At a distance of 2-4 km (distal area), a maximum Bt thickness rarely exceeds 5 dm, an

  16. Land to ocean transfer of erosion-related organic carbon, Waipaoa sedimentary system, East Coast, New Zealand

    International Nuclear Information System (INIS)

    Brackley, H.L.


    efficiency of the Waipaoa River in transferring terrestrial OC directly to the marine environment. Flood layers are preserved in the marine sedimentary record. Continental shelf sediments indicate that during Cyclone Bola (March 1988, a rainfall event with a >100 year return period), the extreme river discharge produced a hyperpycnal (negatively buoyant) plume, preserved as a ∼10 cm thick layer on the inner shelf and a ∼ 1 cm thick layer on the mid-shelf. The flood layer contains a significant amount of terrestrially-sourced OC (up to 86% of total OC in >25 mm fraction) which subsequently was rapidly buried by normal marine deposits (in which ∼ 60% of OC in >25 mm fraction is terrestrial), thereby preserving its strong terrestrial source signature. As sediments are physically and biologically processed at various depositional sites across the continental shelf and slope, they lose some of their modern terrestrial OC, and the concurrent addition of marine sourced OC results in the sediments gaining a stronger marine biogeochemical signature (δ 1 3C values increasing from -26.2 permille for floodplain sediments to -21.6 permille for upper continental slope sediments). Carbon loading (OC:SA) and 1 4C data revealed the contributions of kerogen, modern terrestrial OC and modern marine OC to the total OC of continental shelf and slope surface sediments. Sediments retain about 40% of their terrestrial OC following transport to the continental slope, of which a significant amount consists of kerogen. Because of high erosion rates within the catchment, kerogen associated with the particles escapes oxidation, and therefore makes up a large part of the POC flux. Kerogen is preserved across the margin to the mid-slope, where only 8% of the bulk sediment OC consists of modern terrestrial OC, 58% is modern marine OC and 34% is kerogen. Biomarker analyses of surface samples also support findings that terrestrial OC is being transferred across the continental margin, with plant

  17. Seasonal variations and sources of sedimentary organic carbon in Tokyo Bay

    International Nuclear Information System (INIS)

    Kubo, Atsushi; Kanda, Jota


    Total organic carbon (TOC), total nitrogen (TN) contents, their stable C and N isotope ratio (δ 13 C and δ 15 N), and chlorophyll a ([Chl a] sed ) of surface sediments were investigated monthly to identify the seasonal variations and sources of organic matter in Tokyo Bay. The sedimentary TOC (TOC sed ) and TN (TN sed ) contents, and the sedimentary δ 13 C and δ 15 N (δ 13 C sed and δ 15 N sed ) values were higher in summer than other seasons. The seasonal variations were controlled by high primary production in the water column and hypoxic water in the bottom water during summer. The fraction of terrestrial and marine derived organic matter was estimated by Bayesian mixing model using stable isotope data and TOC/TN ratio. Surface sediments in Tokyo Bay are dominated by marine derived organic matter, which accounts for about 69 ± 5% of TOC sed . - Highlights: • High values of sedimentary organic carbon and nitrogen were observed in summer. • Surface sediments in Tokyo Bay were dominated by marine derived organic matter which was estimated by Bayesian mixing model. • The most amount of terrestrial POC was deposited and degraded in Tokyo Bay before being discharged to the open ocean.

  18. Late Pleistocene dune-sourced alluvial fans in coastal settings: Sedimentary facies and related processes (Mallorca, Western Mediterranean) (United States)

    Pomar, F.; del Valle, L.; Fornós, J. J.; Gómez-Pujol, L.


    Aeolian-alluvial sedimentary interaction results in the formation of deposits characterized by typical alluvial sedimentary structures, but is composed of conspicuous amounts of aeolian sediments. The literature on this topic is limited and most works relate more with continental aeolian dunes or fluvial dune interference with fan bodies. Furthermore, there is a lack of examples of aeolian-alluvial sedimentary interference in coastal settings. In the western Mediterranean, there are many Pleistocene alluvial fan deposits built up partly by sediment originating from coastal dunes dismantled by alluvial streams. Very often, these deposits show a continuous sedimentary sequence through which we can derive the contribution and predominance of coastal, alluvial-colluvial and aeolian processes and their controls on landscape formation. This is an outstanding feature within coastal systems since it shows marine sediments reworked and integrated within coastal dune fields by aeolian transport, and the latter built up into alluvial fan bodies. In this sense, aeolian-alluvial interaction is the geomorphic-sedimentary expression of the coexistence and overlapping of alluvial and aeolian environments resulting in deposits sharing sedimentary features from both environments. The aim of this paper is to unravel the contribution of coastal dunes in the construction of alluvial fans bodies and identify the main sedimentary facies that constitute these deposits, as well as their climatic controls. For this reason, Es Caló fan (northern Mallorca) has been selected due to its well-exposed deposits exhibiting the alternation of aeolian, alluvial and colluvial deposits. Sedimentological and stratigraphic analyses based on 33 logs and complementary analyses demonstrate that most of the facies constituting the fan body are made up completely of marine bioclastic sands. These deposits record an alluvial fan sedimentary environment characterized by sediments inputs that do not proceed

  19. The White Nile sedimentary system (United States)

    Garzanti, Eduardo; Andò, Sergio; Padoan, Marta; Resentini, Alberto; Vezzoli, Giovanni; Villa, Igor


    The Nile River flows for ~6700 km from south of the Equator to finally reach the Mediterranean Sea at northern subtropical latitudes (Woodward et al. 2007). This is the longest sedimentological laboratory on Earth, a unique setting in which we are investigating changes in sediment composition associated with diverse chemical and physical processes, including weathering and hydraulic sorting. The present study focuses on the southern branch of the Nile across 20° of latitude, from hyperhumid Burundi and Rwanda highlands in central Africa to Khartoum, the capital city of Sudan at the southern edge of the Sahara. Our study of the Kagera basin emphasizes the importance of weathering in soils at the source rather than during stepwise transport, and shows that the transformation of parent rocks into quartzose sand may be completed in one sedimentary cycle (Garzanti et al. 2013a). Micas and heavy minerals, less effectively diluted by recycling than main framework components, offer the best key to identify the original source-rock imprint. The different behaviour of chemical indices such as the CIA (a truer indicator of weathering) and the WIP (markedly affected by quartz dilution) helps us to distinguish strongly weathered first-cycle versus polycyclic quartz sands (Garzanti et al. 2013b). Because sediment is efficiently trapped in East African Rift lakes, the composition of Nile sediments changes repeatedly northwards across Uganda. Downstream of both Lake Kyoga and Lake Albert, quartzose sands are progressively enriched in metamorphiclastic detritus supplied from tributaries draining amphibolite-facies basements. The evolution of White Nile sediments across South Sudan, a scarcely accessible region that suffered decades of civil war, was inferred from the available information (Shukri 1950), integrated by original petrographic, heavy-mineral and geochemical data (Padoan et al. 2011). Mineralogical and isotopic signatures of Bahr-el-Jebel and Sobat sediments, derived

  20. Link between Neogene and modern sedimentary environments in the Zagros foreland basin (United States)

    Pirouz, Mortaza; Simpson, Guy; Bahroudi, Abbas


    The Zagros mountain belt, with a length of 1800 km, is located in the south of Iran and was produced by collision between the Arabian plate and the Iran micro plate some time in the early Tertiary. After collision, the Zagros carbonate-dominated sedimentary basin has been replaced by a largely clastic system. The Neogene Zagros foreland basin comprises four main depositional environments which reflect the progressive southward migration of the deformation front with time. The oldest unit - the Gachsaran formation - is clastic in the northern part of the basin, but is dominated by evaporates in southern part, being deposited in a supratidal Sabkha-type environment. Overlying the Gachsaran is the Mishan formation, which is characterized by the Guri limestone member at the base, overlain by marine green marls. The thickness of the Guri member increases dramatically towards the southeast. The next youngest unit is the Aghajari Formation which consists of well sorted lenticular sandstone bodies in a red silty-mudstone. This formation is interpreted as representing the floodplain of dominantly meandering rivers. Finally, the Bakhtiari formation consists of mainly coarse-grained gravel sheets which are interpreted to represent braided river deposits. Each of these Neogene depositional environments has a modern day equivalent. For example, the braided rivers presently active in the Zagros mountains are modern analogues of the Bakhtiari. In the downstream direction, these braided rivers become meandering systems, which are equivalents of the Aghajari. Eventually, the meandering rivers meet the Persian gulf which is the site of the ‘modern day' Mishan shallow marine marls. Finally, the modern carbonate system on the southern margin of Persian Gulf represents the Guri member paleo-environment, behind which Sabkha-type deposits similar to the Gachsaran are presently being deposited. One important implication of this link between the Neogene foreland basin deposits and the

  1. Geological storage of carbon dioxide: the role of sedimentary basins

    International Nuclear Information System (INIS)

    Gunter, W.D.; Bachu, S.


    Sedimentary basins, occuring throughout the world, are thick piles of geologically deposited sediments that are the hosts for fossil fuel deposits. They may become even more important in the future if their large storage capacity is utilized for disposing of carbon dioxide. Sedimentary basins are dynamic, in the sense that they have an intricate plumbing system defined by the location of high and low permeability strata that control the flow of fluids throughout the basins and define 'hydrogeological' traps. The most secure type of hydrogeological trapping is found in oil and gas reservoirs in the form of 'structural' or 'stratigraphic' traps, termed 'closed' hydrogeological traps which have held oil and gas for millions of years. Obviously, these would be very attractive for CO 2 storage due to their long history of containment. A second type of hydrogeological trapping has been recognized in aquifers of sedimentary basins that have slow flow rates. The pore space in such 'open' hydrogeological traps is usually filled with saline ground or formation water. A volume of CO 2 injected into a deep open hydrogeological trap can take over a million years to travel updip to reach the surface and be released to the atmosphere. Although the capacity of structural/stratigraphic traps for CO 2 storage is small relative to open hydrogeological traps in deep sedimentary basins, they are likely to be used first as they are known to be secure, having held oil and gas for geological time. As the capacity of closed traps is exhausted and more is learned about geochemical trapping, the large storage capacity available in open hydrogeological traps will be utilized where security of the geological storage of CO 2 can be enhanced by geochemical reactions of the CO 2 with basic silicate minerals to form carbonates. Potential short circuits to the surface through faults or abandoned wells must be located and their stability evaluated before injection of CO 2 . In any event, a

  2. Sedimentary environments: processes, facies, and stratigraphy

    National Research Council Canada - National Science Library

    Reading, H. G; Reading, Harold G


    ... and chemical systems, 6 2.1.2 Climate, 7 2.1.3 Tectonic movements and subsidence, 11 2.1.4 Sea-level changes, 11 2.1.5 Milankovitch processes and orbital forcing, 14 2.1.6 Intrinsic sedimentary processes,...

  3. Sedimentary Environments Offshore Norway - Palaeozoic to Recent

    Energy Technology Data Exchange (ETDEWEB)

    Martinsen, Ole J.; Dreyer, Tom [eds.


    The report includes the extended abstracts from the conference, 71 in number. The presentations discuss the sedimentary characteristics of the North Sea area and the the methods used in the research, a thorough knowledge of which is important for economic exploration of the oil and gas resources of the North Sea.

  4. Provenance of zircon of the lowermost sedimentary cover, Estonia, East-European Craton

    Directory of Open Access Journals (Sweden)

    Konsa, M.


    Full Text Available Bulk and accessory mineral composition of fresh and weathered crystalline rocks, and sedimentary deposits overlying the crystalline-sedimentary unconformity have been examined in core samples from 28 drill holes in Estonia. Before the Late Vendian to Early Cambrian regional subsidence and sedimentation, the region represented a flat plateau within the Svecofennian Domain. Palaeo-and Mesoproterozoic crystalline rocks, regardless their different initial mineral composition, subcrop under the Upper Vendian/Lower Cambrian sedimentary cover as usually intensely weathered rocks (saprolites composed of residual quartz, altered micas and prevailing clay minerals mainly of the kaolinite group. Thus, the bulk mineral composition of any basement crystalline rocks imparts no specific inherited rock-forming minerals into the covering sedimentary rocks. From the variety of accessory and opaque minerals of crystalline rocks, only zircon populations survived in saprolites. Crystalline rocks of different origin yield different zircons. Relationships between the zircon typology of the basement rocks having specific areas of distribution and the sedimentary rocks immediately overlying those crystalline rocks were the main subject of this study. The result is that siliciclastic sedimentary rocks covering weathered crystalline rocks only in places inherited zircons with typological features characteristic of specific basement areas. In northeastern Estonia, local lenses of the Oru Member (the earliest Upper Vendian sedimentary rocks in Estonia resembling the debris of weathered crystalline rocks yield accessory zircon which in a 1-2 m thick layer above the basement surface is similar to the zircons of the underlying weathering mantle of certain crystalline rocks. In the next unit, the Moldova Member, up to 43 m above the basement surface, a mixture of zircons resembling those of various local basement rocks has been found. Further upwards, in the Vendian and Lower

  5. A process-sedimentary framework for characterizing recent and ancient sabkhas (United States)

    Handford, C.R.


    The discovery of sabkha environments during the 1960's, marked the beginning of Recent evaporite sedimentological studies and their perception as models for facies analysis. However, variation among Recent sabkhas, though recognized by the geologic community, has not been duly addressed, which has resulted in overuse of the Trucial Coast model in comparative sedimentological studies. Knowledge of the dominant physical processes which determine sabkha morphology, and of the sedimentary response to those processes, can lead to a fundamental understanding of a sabkha's origin and of how it differs from other sabkhas. Physical processes thought to be most important (besides evaporation) include those operative under: (1) marine-; (2) fluvial-lacustrine-; and (3) eolian-dominated conditions. Dominance of one or more of these in the proper settings give rise to marine coastal sabkhas, continental playas, and interdune sabkhas. Sedimentary responses to dominant physical processes lead to the development of sabkhas consisting of a combination of either: (1) terrigenous clastics; (2) carbonate-sulfate (anhydrite-gypsum) minerals; or (3) soluble salts (halite, sylvite, polyhalite, etc.). Sediment characterization can also allow discrimination of the range or compositional variety in, for example, coastal sabkhas. Where applied to the stratigraphic record, this classification system may help unravel the sedimentary history of an ancient sabkha system, and a determination of the dominant physical processes that ruled its development. ?? 1981.

  6. Sedimentary architecture and depositional controls of a Pliocene river-dominated delta in the semi-isolated Dacian Basin, Black Sea (United States)

    Jorissen, Elisabeth L.; de Leeuw, Arjan; van Baak, Christiaan G. C.; Mandic, Oleg; Stoica, Marius; Abels, Hemmo A.; Krijgsman, Wout


    Sedimentological facies models for (semi-)isolated basins are less well developed than those for marine environments, but are critical for our understanding of both present-day and ancient deltaic sediment records in restricted depositional environments. This study considers an 835 m thick sedimentary succession of mid-Pliocene age, which accumulated in the Dacian Basin, a former embayment of the Black Sea. Detailed sedimentological and palaeontological analyses reveal a regression from distal prodelta deposits with brackish water faunas to delta-top deposits with freshwater faunas. Sediments contain frequent hyperpycnal plumes and an enrichment in terrestrial organic material, ichnofossils and in situ brackish and freshwater faunas. Deltaic progradation created thin, sharply-based sand bodies formed by multiple terminal distributary channels, covering a wide depositional area. The system experienced frequent delta-lobe switching, resulting in numerous thin parasequences. Parasequences are overlain by erosive reddish oxidized sand beds, enriched in broken, abraded brackish and freshwater shells. These beds were formed after sediment starvation, on top of abandoned delta lobes during each flooding event. A robust magnetostratigraphic time frame allowed for comparison between the observed sedimentary cyclicity and the amplitude and frequency of astronomical forcing cycles. Our results indicate that parasequence frequencies are significantly higher than the number of time equivalent astronomical cycles. This suggests that delta-lobe switching was due to autogenic processes. We consider the observed facies architecture typical for a delta prograding on a low-gradient slope into a shallow, brackish, protected, semi-isolated basin. Furthermore, in the absence of significant wave and tidal influence, sediment progradation in such a protected depositional setting shaped a delta, strongly river-dominated.

  7. Epigenetic alterations of sedimentary rocks at deposits

    International Nuclear Information System (INIS)

    Komarova, G.V.; Kondrat'eva, I.A.; Zelenova, O.I.


    Notions are explained, and technique for studying epigenetic alterations of sedimentary rocks at uranium deposits is described. Main types of epigenetic transformations and their mineralogic-geochemical characteristics are considered. Rock alterations, accompanying uranium mineralization, can be related to 2 types: oxidation and reduction. The main mineralogic-geochemical property of oxidation transformations is epigenetic limonitization. Stratal limonitization in primary grey-coloured terrigenic rocks and in epigenetically reduced (pyritized) rocks, as well as in rock, subjected to epigenetic gleying, are characterized. Reduction type of epigenetic transformations is subdivided into sulphidic and non-sulphidic (gley) subtypes. Sulphidic transformations in grey-coloured terrigenic rocks with organic substance of carbonic row, in rocks, containing organic substance of oil row, sulphide transformations of sedimentary rocks, as well as gley transformations, are considered

  8. The potassic sedimentary rocks in Gale Crater, Mars, as seen by ChemCam Onboard Curiosity (United States)

    Le Deit, Laetitia; Mangold, Nicolas; Forni, Olivier; Cousin, Agnes; Lasue, Jeremie; Schröder, Susanne; Wiens, Roger C.; Sumner, Dawn Y.; Fabre, Cecile; Stack, Katherine M.; Anderson, Ryan; Blaney, Diana L.; Clegg, Samuel M.; Dromart, Gilles; Fisk, Martin; Gasnault, Olivier; Grotzinger, John P.; Gupta, Sanjeev; Lanza, Nina; Le Mouélic, Stephane; Maurice, Sylvestre; McLennan, Scott M.; Meslin, Pierre-Yves; Nachon, Marion; Newsom, Horton E.; Payre, Valerie; Rapin, William; Rice, Melissa; Sautter, Violaine; Treiman, Alan H.


    The Mars Science Laboratory rover Curiosity encountered potassium-rich clastic sedimentary rocks at two sites in Gale Crater, the waypoints Cooperstown and Kimberley. These rocks include several distinct meters thick sedimentary outcrops ranging from fine sandstone to conglomerate, interpreted to record an ancient fluvial or fluvio-deltaic depositional system. From ChemCam Laser-Induced Breakdown Spectroscopy (LIBS) chemical analyses, this suite of sedimentary rocks has an overall mean K2O abundance that is more than 5 times higher than that of the average Martian crust. The combined analysis of ChemCam data with stratigraphic and geographic locations reveals that the mean K2O abundance increases upward through the stratigraphic section. Chemical analyses across each unit can be represented as mixtures of several distinct chemical components, i.e., mineral phases, including K-bearing minerals, mafic silicates, Fe-oxides, and Fe-hydroxide/oxyhydroxides. Possible K-bearing minerals include alkali feldspar (including anorthoclase and sanidine) and K-bearing phyllosilicate such as illite. Mixtures of different source rocks, including a potassium-rich rock located on the rim and walls of Gale Crater, are the likely origin of observed chemical variations within each unit. Physical sorting may have also played a role in the enrichment in K in the Kimberley formation. The occurrence of these potassic sedimentary rocks provides additional evidence for the chemical diversity of the crust exposed at Gale Crater.

  9. Hydrogeologic framework of fractured sedimentary rock, Newark Basin, New Jersey (United States)

    Lacombe, Pierre J.; Burton, William C.


    The hydrogeologic framework of fractured sedimentary bedrock at the former Naval Air Warfare Center (NAWC), Trenton, New Jersey, a trichloroethylene (TCE)-contaminated site in the Newark Basin, is developed using an understanding of the geologic history of the strata, gamma-ray logs, and rock cores. NAWC is the newest field research site established as part of the U.S. Geological Survey Toxic Substances Hydrology Program, Department of Defense (DoD) Strategic Environmental Research and Development Program, and DoD Environmental Security Technology Certification Program to investigate contaminant remediation in fractured rock. Sedimentary bedrock at the NAWC research site comprises the Skunk Hollow, Byram, and Ewing Creek Members of the Lockatong Formation and Raven Rock Member of the Stockton Formation. Muds of the Lockatong Formation that were deposited in Van Houten cycles during the Triassic have lithified to form the bedrock that is typical of much of the Newark Basin. Four lithotypes formed from the sediments include black, carbon-rich laminated mudstone, dark-gray laminated mudstone, light-gray massive mudstone, and red massive mudstone. Diagenesis, tectonic compression, off-loading, and weathering have altered the rocks to give some strata greater hydraulic conductivity than other strata. Each stratum in the Lockatong Formation is 0.3 to 8 m thick, strikes N65 degrees E, and dips 25 degrees to 70 degrees NW. The black, carbon-rich laminated mudstone tends to fracture easily, has a relatively high hydraulic conductivity and is associated with high natural gamma-ray count rates. The dark-gray laminated mudstone is less fractured and has a lower hydraulic conductivity than the black carbon-rich laminated mudstone. The light-gray and the red massive mudstones are highly indurated and tend to have the least fractures and a low hydraulic conductivity. The differences in gamma-ray count rates for different mudstones allow gamma-ray logs to be used to correlate and

  10. Sedimentary processes and depositional environments of the Horn River Shale in British Columbia, Canada (United States)

    Yoon, Seok-Hoon; Koh, Chang-Seong; Joe, Young-Jin; Woo, Ju-Hwan; Lee, Hyun-Suk


    The Horn River Basin in the northeastern British Columbia, Canada, is one of the largest unconventional gas accumulations in North America. It consists mainly of Devonian shales (Horn River Formation) and is stratigraphically divided into three members, the Muskwa, Otterpark and Evie in descending order. This study focuses on sedimentary processes and depositional environments of the Horn River shale based on sedimentary facies analysis aided by well-log mineralogy (ECS) and total organic carbon (TOC) data. The shale formation consists dominantly of siliceous minerals (quartz, feldspar and mica) and subordinate clay mineral and carbonate materials, and TOC ranging from 1.0 to 7.6%. Based on sedimentary structures and micro texture, three sedimentary facies were classified: homogeneous mudstone (HM), indistinctly laminated mudstone (ILM), and planar laminated mudstone (PLM). Integrated interpretation of the sedimentary facies, lithology and TOC suggests that depositional environment of the Horn River shale was an anoxic quiescent basin plain and base-of-slope off carbonate platform or reef. In this deeper marine setting, organic-rich facies HM and ILM, dominant in the Muskwa (the upper part of the Horn River Formation) and Evie (the lower part of the Horn River Formation) members, may have been emplaced by pelagic to hemipelagic sedimentation on the anoxic sea floor with infrequent effects of low-density gravity flows (turbidity currents or nepheloid flows). In the other hand, facies PLM typifying the Otterpark Member (the middle part of the Horn River Formation) suggests more frequent inflow of bottom-hugging turbidity currents punctuating the hemipelagic settling of the background sedimentation process. The stratigraphic change of sedimentary facies and TOC content in the Horn River Formation is most appropriately interpreted to have been caused by the relative sea-level change, that is, lower TOC and frequent signal of turbidity current during the sea

  11. Sedimentary features of the Mercedes formation (upper Cretaceous ) between Mercedes and Fray Bentos cities, Rca. O del Uruguay

    International Nuclear Information System (INIS)

    Tofalo, O.; Pazos, P.


    A new locality by the Mercedes formation is analyzed close to route 2, near at the Mercedes City. The stratigraphic assignment is proposed after the examination of the sedimentary features that include geometry, composition and sedimentary structures. The section that reach 10 meters in thickness contains conglomerates, pebbly sandstones, sandstones and scare mudstones with a finning upward arrangement. All of features are indicative of a alluvial origin. This locality is the first mention of the Mercedes formation in the south section of the Department Rio Negro. (author)

  12. Estimate of the Geothermal Energy Resource in the Major Sedimentary Basins in the United States (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Esposito, A.; Porro, C.; Augustine, C.; Roberts, B.


    Because most sedimentary basins have been explored for oil and gas, well logs, temperatures at depth, and reservoir properties such as depth to basement and formation thickness are well known. The availability of this data reduces exploration risk and allows development of geologic exploration models for each basin. This study estimates the magnitude of recoverable geothermal energy from 15 major known U.S. sedimentary basins and ranks these basins relative to their potential. The total available thermal resource for each basin was estimated using the volumetric heat-in-place method originally proposed by (Muffler, 1979). A qualitative recovery factor was determined for each basin based on data on flow volume, hydrothermal recharge, and vertical and horizontal permeability. Total sedimentary thickness maps, stratigraphic columns, cross sections, and temperature gradient information was gathered for each basin from published articles, USGS reports, and state geological survey reports. When published data were insufficient, thermal gradients and reservoir properties were derived from oil and gas well logs obtained on oil and gas commission databases. Basin stratigraphy, structural history, and groundwater circulation patterns were studied in order to develop a model that estimates resource size, temperature distribution, and a probable quantitative recovery factor.

  13. Ecology of Thioploca spp.: Nitrate and sulfur storage in relation to chemical microgradients and influence of Thioploca spp. on the sedimentary nitrogen cycle

    DEFF Research Database (Denmark)

    Zopfi, J.; Kjaer, T.; Nielsen, LP


    Microsensors, including a recently developed NO(3)(-) biosensor, were applied to measure O(2) and NO(3)(-) profiles in marine sediments from the upwelling area off central Chile and to investigate the influence of Thioploca spp. on the sedimentary nitrogen metabolism. The studies were performed...

  14. Neoproterozoic marine carbonates and their paleoceanographic significance (United States)

    Hood, Ashleigh van Smeerdijk; Wallace, Malcolm William


    The primary mineralogy of marine carbonate precipitates has been a crucial factor in constraining the major element composition of ancient oceans. Secular changes in Phanerozoic marine chemistry, including Mg/Ca, have been well-documented using the original carbonate mineralogy of ooids, marine cements and biominerals. However, the history of Precambrian seawater chemistry is not as well constrained, partially due to the prevalence of dolomitisation in the Precambrian geological record. The Neoproterozoic ( 1000 Ma to 541 Ma) record of primary carbonate mineralogy is documented here using a combination of literature data and new analysis of marine carbonate precipitates from the Otavi Fold Belt, Namibia, the Death Valley succession, USA and the Adelaide Fold Belt, Australia. These data suggest that the last 460 million years of the Proterozoic were dominated by aragonite and high-Mg calcite precipitation in shallow marine settings. In contrast, low-Mg calcite has only been recognised in a small number of formations. In addition to aragonite and calcite precipitation, marine dolomite precipitation was widespread in Neoproterozoic oceans, including mimetic (syn-sedimentary) dolomitisation and primary dolomite marine cementation. The combination of marine aragonite, high Mg-calcite and dolomite precipitation during the Neoproterozoic suggests extremely high seawater Mg/Ca conditions relative to Phanerozoic oceans. Marine dolomite precipitation may also be linked to widespread marine anoxia during this time.

  15. Sediment Thickness and a WEST-EAST Geologic Cross Section in the Caracas Valley




    Caracas is located at the Caribbean - South America plate boundary zone, with an associated strike slip fault system, which accommodates the relative movement of both plates and is responsible for the seismic hazard in the region. The damage pattern of the 1967 Caracas earthquake emphasized the existence of important site effects due to the sedimentary basin fill of the Caracas valley. A revised map of the sedimentary thickness was developed during this study, based on drill holes (mostly fro...

  16. Explorability and predictability of the paleozoic sedimentary sequence beneath the Bruce nuclear site

    International Nuclear Information System (INIS)

    Parmenter, A.; Jensen, M.; Crowe, R.; Raven, K.


    Ontario Power Generation (OPG) is proposing to develop a Deep Geologic Repository (DGR) for the long-term management of its Low and Intermediate Level Waste (L&ILW) at the Bruce nuclear site located in the Municipality of Kincardine, Ontario. A 4-year program of geoscientific studies to assess the suitability of the 850 m thick Palaeozoic age sedimentary sequence beneath the site to host the DGR was completed in 2010. The studies provide evidence of a geologic setting in which the DGR concept would be safely implemented at a nominal depth of 680 m within the argillaceous limestone of the Cobourg Formation. This paper describes the geologic framework of the Bruce nuclear site with a focus on illustrating the high degree of stratigraphic continuity and traceability at site-specific and regional scales within the Ordovician sediments proposed to host and enclose the DGR. As part of the site-specific studies, a program of deep drilling/coring (6 boreholes) and in-situ testing through the sedimentary sequence was completed from 4 drill sites situated beyond the DGR footprint, approximately 1 km apart. Core logging reveals that the stratigraphic sequence comprises 34 distinct bedrock formations/members/units consistent with the known regional stratigraphic framework. These layered sedimentary formations dip 0.6 o (~10 m/km) to the southwest with highly uniform thicknesses both at the site- and regional-scale, particularly, the Ordovician sediments, which vary on the order of metres. The occurrence of steeply-dipping faults within the sedimentary sequence is not revealed through surface outcrop fracture mapping, micro-seismic (M ≥ 1) monitoring, inclined borehole coring or intersection of hydrothermal type dolomitized reservoir systems. Potential fault structures, interpreted from a 2-D seismic survey, were targeted by angled boreholes which found no evidence for their existence. Formation specific continuity is also evidence by the lateral traceability of physical rock

  17. Palinspastic reconstruction and geological evolution of Permian residual marine basins bordering China and Mongolia

    Directory of Open Access Journals (Sweden)

    Gen-Yao Wu


    Full Text Available One main feature of the tectono-paleogeographic evolution of the southern branch of the Paleo-Asian Ocean was that there developed residual marine basins in former backarc/forearc regions after the disappearance of oceanic crust. The paper illustrates the viewpoint taking the evolution of Dalandzadgad and Solonker oceanic basins as examples. The Dalandzadgad ocean subducted southwards during the Silurian-Devonian, created an intra-oceanic arc and a backarc basin in southern Mongolia. In addition, a continent marginal arc formed along the national boundary between China and Mongolia, the south of which was a backarc basin. The oceanic basin closed and arc–arc (continent collision occurred during the early Early Permian, followed by two residual marine basins developing in the former backarc regions, named the South Gobi Basin in southern Mongolia and the Guaizihu Basin in western Inner Mongolia. The Solonker ocean subducted southwards and finally disappeared during the early Middle Permian. Afterwards, two residual marine basins occurred in northern China, the Zhesi Basin being situated in the former backarc region and the Wujiatun Basin in the former forearc region. The late Middle Permian was the most optimum period for the developing residual marine basins, when they covered a vast area. The basin evolution differentiated during the early Late Permian, with a general trend of uplift in the east and of subsidence in the west. The Upper Permian in the South Gobi Basin was characterized by coal-bearing strata hosting economically valuable coal fields. A transgression invaded westwards and the Chandmani-Bayanleg Basin was created in southwest Mongolia during the middle-late stage of the Late Permian. Correspondingly, the coal formation entered a flourishing time, with thick coal beds and sedimentary interbeds. All of these basins, namely, both the marine and nonmarine residual basins, reversed and closed by the end of Permian.

  18. Coverage hab108_0201 -- Habitat polygons for HMPR-108-2002-01 survey in Olympic Coast national marine sanctuary. (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Benthic habitat polygon coverages are being created for the Olympic Coast national marine sanctuary (OCNMS).ROV, towed camera sled, bathymetry data, sedimentary...

  19. Sedimentary mode and reservoir distribution of the Cambrian carbonate & evaporate paragenesis system in the Sichuan Basin

    Directory of Open Access Journals (Sweden)

    Anna Xu


    Full Text Available The Cambrian carbonate & evaporite paragenesis system in the Sichuan Basin is made up of the Longwangmiao, Gaotai and Xixiangchi Fms. So far, great breakthrough has been made only in the Longwangmiao Fm instead of the latter two, and the Anyue Gasfield was discovered in the center of this basin. In this paper, therefore, the Cambrian carbonate & evaporite paragenesis system in the Sichuan Basin was analyzed in terms of its structural–sedimentary setting, sequence stratigraphic framework, sedimentary facies and the distribution of evaporites by using various geologic, logging and seismic data. Then, the geological model of sedimentary facies was established and the distribution range of favorable reservoirs was predicted. Based on these studies, the following results are obtained. Firstly, the palaeotectonic framework is characterized by the style of “one depression between two uplifts” in the setting of a large SE dipping slope, and the stratigraphic filling is in the structure of “onlapping at the bottom and truncation at the top” which is thin in the west and thick in the east. Secondly, three third-order sequence cycles which, on the whole, become shallow upward are developed from bottom to top, and gypsum-salt rocks are mainly located at the high system tract (HST of third-order sequences and concentrated in the Wanzhou–Yibin sag. Thirdly, the geological model of sedimentary facies is composed of three major sedimentary structural layers from bottom to top, namely the evaporative carbonate ramp, the evaporative diamictic restricted platform and the evaporative restricted platform. The sedimentary environment changes from the open to the closed and the penesaline for a long time, and then back to the open. The distribution of shoals changes from the pattern of “dual banks” in a large area to more scattered shoals and banded shoals, while the evaporative lagoon and tidal flat shrink. Fourthly, the reservoir distribution is

  20. Characterization of some sedimentary sequences from Cambay basin, India, by pyrolysis-GC (United States)

    Philp, R. P.; Garg, A. K.

    Pyrolysis-gas chromatography of sedimentary sequences from a key exploratory well of the southern Cambay Basin, India, has been performed to characterize the nature of the source material and its maturity. In samples from the Eocene-Paleocene section (2960-3407 m), the pyrolysate is dominated by hydrocarbons in the lower molecular weight region indicating a significant input algal source material. The presence of various xylenes and phenols in the pyrograms is indicative of a significant input from higher plant material. The organic material in this section is interpreted to have been derived from marine-terrestrial source inputs deposited under swampy to marine and reducing environments. Good mature source rocks with type III kerogens which are wet gas/gas condensate-prone have been identified in this region. This paper intends to discuss the characterization of source rocks using the pyrolysis-gas chromatography approach and the significance of the distribution of the pyrolysis product.

  1. Sedimentary noise and sea levels linked to land-ocean water exchange and obliquity forcing. (United States)

    Li, Mingsong; Hinnov, Linda A; Huang, Chunju; Ogg, James G


    In ancient hothouses lacking ice sheets, the origins of large, million-year (myr)-scale sea-level oscillations remain a mystery, challenging current models of sea-level change. To address this mystery, we develop a sedimentary noise model for sea-level changes that simultaneously estimates geologic time and sea level from astronomically forced marginal marine stratigraphy. The noise model involves two complementary approaches: dynamic noise after orbital tuning (DYNOT) and lag-1 autocorrelation coefficient (ρ 1 ). Noise modeling of Lower Triassic marine slope stratigraphy in South China reveal evidence for global sea-level variations in the Early Triassic hothouse that are anti-phased with continental water storage variations in the Germanic Basin. This supports the hypothesis that long-period (1-2 myr) astronomically forced water mass exchange between land and ocean reservoirs is a missing link for reconciling geological records and models for sea-level change during non-glacial periods.

  2. Marine ecology

    International Nuclear Information System (INIS)



    Studies on marine ecology included marine pollution; distribution patterns of Pu and Am in the marine waters, sediments, and organisms of Bikini Atoll and the influence of physical, chemical, and biological factors on their movements through marine biogeochemical systems; transfer and dispersion of organic pollutants from an oil refinery through coastal waters; transfer of particulate pollutants, including sediments dispersed during construction of offshore power plants; and raft culture of the mangrove oysters

  3. Marine pollution

    International Nuclear Information System (INIS)

    Albaiges, J.


    This book covers the following topics: Transport of marine pollutants; Transformation of pollutants in the marine environment; Biological effects of marine pollutants; Sources and transport of oil pollutants in the Persian Gulf; Trace metals and hydrocarbons in Syrian coastal waters; and Techniques for analysis of trace pollutants

  4. Igneous-sedimentary petroleum systems; Sistemas petroliferos igneo-sedimentares

    Energy Technology Data Exchange (ETDEWEB)

    Eiras, Jaime Fernandes [Para Univ., Belem, PA (Brazil)]. E-mail:; Wanderley Filho, Joaquim Ribeiro [PETROBRAS S.A., Manaus, AM (Brazil). Unidade de Negocios-BSOL]. E-mail:


    Igneous-sedimentary petroleum systems are mixed systems in which one or more essential elements or processes are related to magmatic events. Many examples worldwide are presented to show the importance of igneous rocks in the exploratory activities, as well as in the petroleum occurrence. Volcanic ash layers are of great importance in stratigraphic correlation and elucidation of structures, particularly when they occur in thick nonfossiliferous strata. They are also good indicators of turbidite deposition where turbidity currents are related to earthquakes generated by magmatic events. Unconventional reservoirs can be created by volcanic eruptions or intrusions, crystallization, reworking, and fracturing. Unaltered igneous rocks can seal vertically and laterally conventional reservoirs due to its excellent cap capacity. Abnormal thermal effect of igneous rocks can compensate the lack of overburden in shallow basins. Structural or combined traps can be formed due to intrusions, such as folded, faulted, and unconformity traps. Porosity can be either primary or secondary, or both. Primary porosity mainly consists of cavities produced by gas volatilization during eruption and cooling. Secondary porosity refers to those pores that result from hydrothermal alteration, recrystallization, and dissolution by groundwater, and tectonic stress. It includes intercrystalline pores formed by crystallization of various secondary minerals, dissolution pores, and tectonic fractures. New technologies of petroleum development and production are encouraging to search for oil and gas within igneous rocks, and new discoveries are expected. (author)

  5. Land subsidence and hydrodynamic compaction of sedimentary basins

    Directory of Open Access Journals (Sweden)

    H. Kooi


    Full Text Available A one-dimensional model is used to investigate the relationship between land subsidence and compaction of basin sediments in response to sediment loading. Analysis of the model equations and numerical experiments demonstrate quasi-linear systems behaviour and show that rates of land subsidence due to compaction: (i can attain a significant fraction (>40% of the long-term sedimentation rate; (ii are hydrodynamically delayed with respect to sediment loading. The delay is controlled by a compaction response time τc that can reach values of 10-5-107 yr for thick shale sequences. Both the behaviour of single sediment layers and multiple-layer systems are analysed. Subsequently the model is applied to the coastal area of the Netherlands to illustrate that lateral variability in compaction-derived land subsidence in sedimentary basins largely reflects the spatial variability in both sediment loading and compaction response time. Typical rates of compaction-derived subsidence predicted by the model are of the order of 0.1 mm/yr but may reach values in excess of 1 mm/yr under favourable conditions.

  6. Stratigraphic sequence and sedimentary characteristics of Lower Silurian Longmaxi Formation in Sichuan Basin and its peripheral areas

    Directory of Open Access Journals (Sweden)

    Yuman Wang


    Full Text Available A high-precision sedimentary environment study of the Lower Silurian Longmaxi Formation is an important subject for shale gas exploration and development in Sichuan Basin and its surrounding areas. On the basis of outcrops and drilling data, its isochronous stratigraphic framework was built according to a particular graptolite zone and an important marker bed, and lithofacies, paleontology, calcareous content, well logging, geochemistry and other geologic information were combined to describe the sedimentary microfacies of Longmaxi Formation and its stratigraphic sequence, sedimentary evolution process and high quality shale distribution features as follows: ① with regional diachronism of the top and the bottom, the Longmaxi Formation is divided into two third-order sequences (SQ1 and SQ2, of which SQ1 is mainly an abyssal sedimentary assemblage deposited in the marine transgression period, and SQ2 is a bathyal to shallow sea sedimentary assemblage deposited in the marine regression period; ② there are eight microfacies such as deep calcareous shelf and deep argillaceous shelf in this formation and the organic-rich shale was mainly deposited in the deep water area of SQ1; and ③ from SQ1 to SQ2, the depocenter moved from the depression area in southern-eastern to northern Sichuan Basin, but the central Sichuan uplift remained an underwater one. It is concluded from this study that: ① shale gas production layers were mainly deposited in SQ1, the southern-eastern depression area was the depocenter in SQ1 and a shale gas enrichment area; and ② black shale in northern Sichuan was deposited in late SQ2, with limited distribution and relatively insufficient exploration potential, but the potential of shale gas exploration in western Hubei area is between southern-eastern and northern Sichuan Basin.

  7. Marine genomics

    DEFF Research Database (Denmark)

    Oliveira Ribeiro, Ângela Maria; Foote, Andrew David; Kupczok, Anne


    Marine ecosystems occupy 71% of the surface of our planet, yet we know little about their diversity. Although the inventory of species is continually increasing, as registered by the Census of Marine Life program, only about 10% of the estimated two million marine species are known. This lag......-throughput sequencing approaches have been helping to improve our knowledge of marine biodiversity, from the rich microbial biota that forms the base of the tree of life to a wealth of plant and animal species. In this review, we present an overview of the applications of genomics to the study of marine life, from...

  8. Sedimentary basins reconnaissance using the magnetic Tilt-Depth method (United States)

    Salem, A.; Williams, S.; Samson, E.; Fairhead, D.; Ravat, D.; Blakely, R.J.


    We compute the depth to the top of magnetic basement using the Tilt-Depth method from the best available magnetic anomaly grids covering the continental USA and Australia. For the USA, the Tilt-Depth estimates were compared with sediment thicknesses based on drilling data and show a correlation of 0.86 between the datasets. If random data were used then the correlation value goes to virtually zero. There is little to no lateral offset of the depth of basinal features although there is a tendency for the Tilt-Depth results to be slightly shallower than the drill depths. We also applied the Tilt-Depth method to a local-scale, relatively high-resolution aeromagnetic survey over the Olympic Peninsula of Washington State. The Tilt-Depth method successfully identified a variety of important tectonic elements known from geological mapping. Of particular interest, the Tilt-Depth method illuminated deep (3km) contacts within the non-magnetic sedimentary core of the Olympic Mountains, where magnetic anomalies are subdued and low in amplitude. For Australia, the Tilt-Depth estimates also give a good correlation with known areas of shallow basement and sedimentary basins. Our estimates of basement depth are not restricted to regional analysis but work equally well at the micro scale (basin scale) with depth estimates agreeing well with drill hole and seismic data. We focus on the eastern Officer Basin as an example of basin scale studies and find a good level of agreement between previously-derived basin models. However, our study potentially reveals depocentres not previously mapped due to the sparse distribution of well data. This example thus shows the potential additional advantage of the method in geological interpretation. The success of this study suggests that the Tilt-Depth method is useful in estimating the depth to crystalline basement when appropriate quality aeromagnetic anomaly data are used (i.e. line spacing on the order of or less than the expected depth to

  9. Permanganate diffusion and reaction in sedimentary rocks. (United States)

    Huang, Qiuyuan; Dong, Hailiang; Towne, Rachael M; Fischer, Timothy B; Schaefer, Charles E


    In situ chemical oxidation using permanganate has frequently been used to treat chlorinated solvents in fractured bedrock aquifers. However, in systems where matrix back-diffusion is an important process, the ability of the oxidant to migrate and treat target contaminants within the rock matrix will likely determine the overall effectiveness of this remedial approach. In this study, a series of diffusion experiments were performed to measure the permanganate diffusion and reaction in four different types of sedimentary rocks (dark gray mudstone, light gray mudstone, red sandstone, and tan sandstone). Results showed that, within the experimental time frame (~2 months), oxidant migration into the rock was limited to distances less than 500 μm. The observed diffusivities for permanganate into the rock matrices ranged from 5.3 × 10(-13) to 1.3 × 10(-11) cm(2)/s. These values were reasonably predicted by accounting for both the rock oxidant demand and the effective diffusivity of the rock. Various Mn minerals formed as surface coatings from reduction of permanganate coupled with oxidation of total organic carbon (TOC), and the nature of the formed Mn minerals was dependent upon the rock type. Post-treatment tracer testing showed that these Mn mineral coatings had a negligible impact on diffusion through the rock. Overall, our results showed that the extent of permanganate diffusion and reaction depended on rock properties, including porosity, mineralogy, and organic carbon. These results have important implications for our understanding of long-term organic contaminant remediation in sedimentary rocks using permanganate. Copyright © 2014 Elsevier B.V. All rights reserved.

  10. Advanced Horizontal Well Recirculation Systems for Geothermal Energy Recovery in Sedimentary and Crystalline Formations

    Energy Technology Data Exchange (ETDEWEB)

    Bruno, Mike S. [Terralog Technologies USA, Inc., Calgary (Canada); Detwiler, Russell L. [Terralog Technologies USA, Inc., Calgary (Canada); Lao, Kang [Terralog Technologies USA, Inc., Calgary (Canada); Serajian, Vahid [Terralog Technologies USA, Inc., Calgary (Canada); Elkhoury, Jean [Terralog Technologies USA, Inc., Calgary (Canada); Diessl, Julia [Terralog Technologies USA, Inc., Calgary (Canada); White, Nicky [Terralog Technologies USA, Inc., Calgary (Canada)


    There is increased recognition that geothermal energy resources are more widespread than previously thought, with potential for providing a significant amount of sustainable clean energy worldwide. Recent advances in drilling, completion, and production technology from the oil and gas industry can now be applied to unlock vast new geothermal resources, with some estimates for potential electricity generation from geothermal energy now on the order of 2 million megawatts. The primary objectives of this DOE research effort are to develop and document optimum design configurations and operating practices to produce geothermal power from hot permeable sedimentary and crystalline formations using advanced horizontal well recirculation systems. During Phase I of this research project Terralog Technologies USA and The University of California, Irvine (UCI), have completed preliminary investigations and documentation of advanced design concepts for paired horizontal well recirculation systems, optimally configured for geothermal energy recovery in permeable sedimentary and crystalline formations of varying structure and material properties. We have also identified significant geologic resources appropriate for application of such technology. The main challenge for such recirculation systems is to optimize both the design configuration and the operating practices for cost-effective geothermal energy recovery. These will be strongly influenced by sedimentary formation properties, including thickness and dip, temperature, thermal conductivity, heat capacity, permeability, and porosity; and by working fluid properties.

  11. Long-term sedimentary recycling of rare sulphur isotope anomalies. (United States)

    Reinhard, Christopher T; Planavsky, Noah J; Lyons, Timothy W


    The accumulation of substantial quantities of O2 in the atmosphere has come to control the chemistry and ecological structure of Earth's surface. Non-mass-dependent (NMD) sulphur isotope anomalies in the rock record are the central tool used to reconstruct the redox history of the early atmosphere. The generation and initial delivery of these anomalies to marine sediments requires low partial pressures of atmospheric O2 (p(O2); refs 2, 3), and the disappearance of NMD anomalies from the rock record 2.32 billion years ago is thought to have signalled a departure from persistently low atmospheric oxygen levels (less than about 10(-5) times the present atmospheric level) during approximately the first two billion years of Earth's history. Here we present a model study designed to describe the long-term surface recycling of crustal NMD anomalies, and show that the record of this geochemical signal is likely to display a 'crustal memory effect' following increases in atmospheric p(O2) above this threshold. Once NMD anomalies have been buried in the upper crust they are extremely resistant to removal, and can be erased only through successive cycles of weathering, dilution and burial on an oxygenated Earth surface. This recycling results in the residual incorporation of NMD anomalies into the sedimentary record long after synchronous atmospheric generation of the isotopic signal has ceased, with dynamic and measurable signals probably surviving for as long as 10-100 million years subsequent to an increase in atmospheric p(O2) to more than 10(-5) times the present atmospheric level. Our results can reconcile geochemical evidence for oxygen production and transient accumulation with the maintenance of NMD anomalies on the early Earth, and suggest that future work should investigate the notion that temporally continuous generation of new NMD sulphur isotope anomalies in the atmosphere was likely to have ceased long before their ultimate disappearance from the rock record.

  12. Avalanches of sediment form deep-marine depositions

    NARCIS (Netherlands)

    Pohl, Florian|info:eu-repo/dai/nl/34309424X


    The deep ocean is the largest sedimentary system basin on the planet. It serves as the primary storage point for all terrestrially weathered sediment that makes it beyond the near-shore environment. These deep-marine offshore deposits have become a focus of attention in exploration due to the

  13. Ether lipids of planktonic archae in the marine water column

    NARCIS (Netherlands)

    Sinninghe Damsté, J.S.; Hoefs, M.J.L.; Schouten, S.; King, L.L.; Wakeham, S.G.; Leeuw, J.W. de


    Acyclic and cyclic biphytanes derived from the membrane ether lipids of archaea were found in water column particulate and sedimentary organic matter from several oxic and anoxic marine environments. Compound-specific isotope analyses of the carbon skeletons suggest that planktonic archaea utilize

  14. Archaen to Recent aeolian sand systems and their sedimentary record

    DEFF Research Database (Denmark)

    Rodríguez-López, Juan Pedro; Clemmensen, Lars B; Lancaster, Nick


    The sedimentary record of aeolian sand systems extends from the Archean to the Quaternary, yet current understanding of aeolian sedimentary processes and product remains limited. Most preserved aeolian successions represent inland sand-sea or dunefield (erg) deposits, whereas coastal systems are ...

  15. Sedimentary environments and stratigraphy of the carbonate-silicilastic deposits of the Shirgesht Formation: implications for eustasy and local tectonism in the Kalmard Block, Central Iran

    Directory of Open Access Journals (Sweden)

    aram bayetgoll


    Formations along the basement Kalmard Fault. In the present study, three stratigraphic sections (NW-SE transects were measured, described and sampled in the Kalmard area. In these sections, detailed considerations have been given on the lithofacies variations; bed geometry and contacts, faunal content, the potential of trace fossils as tools for reconstructing depositional conditions, sedimentary textures and structures, bounding surfaces, vertical trends and stacking patterns and lateral/vertical variations in facies and thicknesses. The observed siliciclastic facies can readily be interpreted using existing shelf sedimentation and shoreline succession models (e.g. Walker and Plint 1992 . Interpretation carbonate facies have been done on the basis the microfacies analysis (200 thin-sections, sedimentary textures and structures and faunal content (Wilson et al. 1975; Flügel 2010 . In final, internal architecture, characteristics of sedimentary facies, the overall stacking pattern and nature of sequence-bounding unconformities have been investigated to evaluate the influence of regional uplift, local tectonics and eustasy on both along-strike variations in sequence architecture and genetic complexity of sequence boundaries.     Discussion, Results and Conclusion   The Lower Ordovician Shirgesht Formation in central Iran is composed of siliciclastic and carbonate rocks deposited in diverse coastal and marine shelf environments (tidal flat, lagoon, shoreface, and offshore-shelf and carbonate ramp. Relying on the facies characteristics and stratal geometries, the siliciclastic succession are divided into five facies associations, FA1 (tidal flat, FA2 (lagoon/washoverfan, FA3 (upper shoreface-foreshore, FA4 (lower to middle shoreface, and FA5 (offshore-shelf.Carbonate succession of this formation based on lithology, sedimentary characteristics and textures divided into four facies belts, FA (tidal flat, FB (lagoon,FC (shoal/barrier island, and FD (open marine. These facies

  16. Style and timing of salt tectonics in the Dniepr-Donets Basin (Ukraine): implications for triggering and driving mechanisms of salt movement in sedimentary basins.

    NARCIS (Netherlands)

    Stovba, S.M.; Stephenson, R.A.


    The Ukrainian Dniepr-Donets Basin (DDB) is a Late Palaeozoic intracratonic rift basin, with sedimentary thicknesses up to 19 km, displaying the effects of salt tectonics during its entire history of formation, from Late Devonian rifting to the Tertiary. Hundreds of concordant and discordant salt

  17. Recent benthic foraminifera and sedimentary facies distribution of the Abu Dhabi (United Arab Emirates) coastline (United States)

    Fiorini, Flavia; Lokier, Stephen W.


    The distribution of benthic foraminifera and sedimentary facies from Recent coastline environments adjacent to the coastline of Abu Dhabi (UAE) was studied in detail with the aim to: 1) provide reliable analogs for understanding and interpreting the depositional environment of ancient shallow-marine sediments from the UAE; 2) assess any modifications in the distribution of benthic environments and sedimentary facies in an area affected by significant anthropogenic activities - particular construction and land reclamation. A total of 100 sea-floor sediment samples were collected in different shallow-marine sedimentary environments (nearshore shelf, beach-front, channels, ooid shoals, lagoon and mangals) close to the coastline of Abu Dhabi Island. Where possible, we revisited the sampling sites used in several studies conducted in the middle of last century (prior to any significant anthropogenic activities) to assess temporal changes in Recent benthic foraminifera and sedimentary facies distribution during the last 50 years. Five foraminiferal assemblages were recognized in the studied area. Species with a porcellaneous test mainly belonging to the genera Quinqueloculina, Triloculina, Spiroloculina, Sigmoilinita are common in all studied areas. Larger benthic foraminifera Peneroplis and Spirolina are particularly abundant in samples collected on seaweed. Hyaline foraminifera mostly belonging to the genera Elphidium, Ammonia, Bolivina and Rosalina are also common together with Miliolidae in the nearshore shelf and beach front. Agglutinated foraminifera (Clavulina, Textularia, Ammobaculites and Reophax) are present in low percentages. The species belonging to the genera Ammobaculites and Reophax are present only in the finest grain samples particularly in lagoons and mangal environments and have not been reported previously in the studied area. The majority of the ooid shoal sediments, the coarser sediments of the beach-front and samples collected in dredged channels

  18. Sedimentary Facies Mapping Based on Tidal Channel Network and Topographic Features (United States)

    Ryu, J. H.; Lee, Y. K.; Kim, K.; Kim, B.


    Tidal flats on the west coast of Korea suffer intensive changes in their surface sedimentary facies as a result of the influence of natural and artificial changes. Spatial relationships between surface sedimentary facies distribution and benthic environments were estimated for the open-type Ganghwa tidal flat and semi closed-type Hwangdo tidal flat, Korea. In this study, we standardized the surface sedimentary facies and tidal channel index of the channel density, distance, thickness and order. To extract tidal channel information, we used remotely sensed data, such as those from the Korea Multi-Purpose Satellite (KOMPSAT)-2, KOMPSAT-3, and aerial photographs. Surface sedimentary facies maps were generated based on field data using an interpolation method.The tidal channels in each sediment facies had relatively constant meandering patterns, but the density and complexity were distinguishable. The second fractal dimension was 1.7-1.8 in the mud flat, about 1.4 in the mixed flat, and about 1.3 in the sand flat. The channel density was 0.03-0.06 m/m2 in the mud flat and less than 0.02 m/m2 in the mixed and sand flat areas of the two test areas. Low values of the tidal channel index, which indicated a simple pattern of tidal channel distribution, were identified at areas having low elevation and coarse-grained sediments. By contrast, high values of the tidal channel index, which indicated a dendritic pattern of tidal channel distribution, were identified at areas having high elevation and fine-grained sediments. Surface sediment classification based on remotely sensed data must circumspectly consider an effective critical grain size, water content, local topography, and intertidal structures.

  19. Marine biology

    International Nuclear Information System (INIS)

    Thurman, H.V.; Webber, H.H.


    This book discusses both taxonomic and ecological topics on marine biology. Full coverage of marine organisms of all five kingdoms is provided, along with interesting and thorough discussion of all major marine habitats. Organization into six major parts allows flexibility. It also provides insight into important topics such as disposal of nuclear waste at sea, the idea that life began on the ocean floor, and how whales, krill, and people interact. A full-color photo chapter reviews questions, and exercises. The contents are: an overview marine biology: fundamental concepts/investigating life in the ocean; the physical ocean, the ocean floor, the nature of water, the nature and motion of ocean water; general ecology, conditions for life in the sea, biological productivity and energy transfer; marine organisms; monera, protista, mycota and metaphyta; the smaller marine animals, the large animals marine habitats, the intertidal zone/benthos of the continental shelf, the photic zone, the deep ocean, the ocean under stress, marine pollution, appendix a: the metric system and conversion factors/ appendix b: prefixes and suffixes/ appendix c: taxonomic classification of common marine organisms, and glossary, and index

  20. The role microbial sulfate reduction in the direct mediation of sedimentary authigenic carbonate precipitation (United States)

    Turchyn, A. V.; Walker, K.; Sun, X.


    The majority of modern deep marine sediments are bathed in water that is undersaturated with respect to calcium carbonate. However, within marine sediments changing chemical conditions, driven largely by the microbial oxidation of organic carbon in the absence of oxygen, lead to supersaturated conditions and drive calcium carbonate precipitation. This sedimentary calcium carbonate is often called `authigenic carbonate', and is found in the form of cements and disseminated crystals within the marine sedimentary pile. As this precipitation of this calcium carbonate is microbially mediated, identifying authigenic carbonate within the geological record and understanding what information its geochemical and/or isotopic signature may hold is key for understanding its importance and what information it may contain past life. However, the modern controls on authigenic carbonate precipitation remain enigmatic because the myriad of microbially mediated reactions occurring within sediments both directly and indirectly impact the proton balance. In this submission we present data from 25 ocean sediment cores spanning the globe where we explore the deviation from the stoichiometrically predicted relationships among alkalinity, calcium and sulfate concentrations. In theory for every mol of organic carbon reduced by sulfate, two mol of alkalinity is produced, and to precipitate subsurface calcium carbonate one mol of calcium is used to consume two mol of alkalinity. We use this data with a model to explore changes in carbonate saturation state with depth below the seafloor. Alkalinity changes in the subsurface are poorly correlated with changes in calcium concentrations, however calcium concentrations are directly and tightly coupled to changes in sulfate concentrations in all studied sites. This suggests a direct role for sulfate reducing bacteria in the precipitation of subsurface carbonate cements.

  1. Formation Conditions and Sedimentary Characteristics of a Triassic Shallow Water Braided Delta in the Yanchang Formation, Southwest Ordos Basin, China.

    Directory of Open Access Journals (Sweden)

    Ziliang Liu

    Full Text Available A large, shallow braided river delta sedimentary system developed in the Yanchang Formation during the Triassic in the southwest of the Ordos basin. In this braided delta system, abundant oil and gas resources have been observed, and the area is a hotspot for oil and gas resource exploration. Through extensive field work on outcrops and cores and analyses of geophysical data, it was determined that developments in the Late Triassic produced favorable geological conditions for the development of shallow water braided river deltas. Such conditions included a large basin, flat terrain, and wide and shallow water areas; wet and dry cyclical climate changes; ancient water turbulence; dramatic depth cycle changes; ancient uplift development; strong weathering of parent rock; and abundant supply. The shallow water braided river delta showed grain sediment granularity, plastic debris, and sediment with mature composition and structure that reflected the strong hydrodynamic environment of large tabular cross-bedding, wedge cross-bedding, and multiple positive rhythms superimposed to form a thick sand body layer. The branch river bifurcation developed underwater, and the thickness of the sand body increased further, indicating that the slope was slow and located in shallow water. The seismic responses of the braided river delta reflected strong shallow water performance, indicated by a progradation seismic reflection phase axis that was relatively flat; in addition, the seismic reflection amplitude was strong and continuous with a low angle and extended over considerable distances (up to 50 km. The sedimentary center was close to the provenance, the width of the river was large, and a shallow sedimentary structure and a sedimentary rhythm were developed. The development of the delta was primarily controlled by tectonic activity and changes in the lake level; as a result, the river delta sedimentary system eventually presented a "small plain, big front

  2. Formation Conditions and Sedimentary Characteristics of a Triassic Shallow Water Braided Delta in the Yanchang Formation, Southwest Ordos Basin, China. (United States)

    Liu, Ziliang; Shen, Fang; Zhu, Xiaomin; Li, Fengjie; Tan, Mengqi


    A large, shallow braided river delta sedimentary system developed in the Yanchang Formation during the Triassic in the southwest of the Ordos basin. In this braided delta system, abundant oil and gas resources have been observed, and the area is a hotspot for oil and gas resource exploration. Through extensive field work on outcrops and cores and analyses of geophysical data, it was determined that developments in the Late Triassic produced favorable geological conditions for the development of shallow water braided river deltas. Such conditions included a large basin, flat terrain, and wide and shallow water areas; wet and dry cyclical climate changes; ancient water turbulence; dramatic depth cycle changes; ancient uplift development; strong weathering of parent rock; and abundant supply. The shallow water braided river delta showed grain sediment granularity, plastic debris, and sediment with mature composition and structure that reflected the strong hydrodynamic environment of large tabular cross-bedding, wedge cross-bedding, and multiple positive rhythms superimposed to form a thick sand body layer. The branch river bifurcation developed underwater, and the thickness of the sand body increased further, indicating that the slope was slow and located in shallow water. The seismic responses of the braided river delta reflected strong shallow water performance, indicated by a progradation seismic reflection phase axis that was relatively flat; in addition, the seismic reflection amplitude was strong and continuous with a low angle and extended over considerable distances (up to 50 km). The sedimentary center was close to the provenance, the width of the river was large, and a shallow sedimentary structure and a sedimentary rhythm were developed. The development of the delta was primarily controlled by tectonic activity and changes in the lake level; as a result, the river delta sedimentary system eventually presented a "small plain, big front" character.

  3. To what extent can intracrater layered deposits that lack clear sedimentary textures be used to infer depositional environments? (United States)

    Cadieux, Sarah B.; Kah, Linda C.


    Craters within Arabia Terra, Mars, contain hundreds of meters of layered strata showing systematic alternation between slope- and cliff-forming units, suggesting either rhythmic deposition of distinct lithologies or similar lithologies that experienced differential cementation. On Earth, rhythmically deposited strata can be examined in terms of stratal packaging, wherein the interplay of tectonics, sediment deposition, and base level (i.e., the position above which sediment accumulation is expected to be temporary) result in changes in the amount of space available for sediment accumulation. These predictable patterns of sediment deposition can be used to infer changes in basin accommodation regardless of the mechanism of deposition (e.g. fluvial, lacustrine, or aeolian). Here, we analyze sedimentary deposits from three craters (Becquerel Crater, Danielson Crater, Crater A) in Arabia Terra. Each crater contains layered deposits that are clearly observed in orbital images. Although orbital images are insufficient to specifically determine the origin of sedimentary deposits, depositional couplets can be interpreted in terms of potential accommodation space available for deposition, and changes in the distribution of couplet thickness through stratigraphy can be interpreted in terms of changing base level and the production of new accommodation space. Differences in stratal packaging in these three craters suggest varying relationships between sedimentary influx, sedimentary base level, and concomitant changes in accommodation space. Previous groundwater upwelling models hypothesize that layered sedimentary deposits were deposited under warm climate conditions of early Mars. Here, we use observed stacking patterns to propose a model for deposition under cold climate conditions, wherein episodic melting of ground ice could raise local base level, stabilize sediment deposition, and result in differential cementation of accumulated strata. Such analysis demonstrates that

  4. The investigation of sedimentary facies and stacking pattern in the Mulid River (Southeastern Qayen

    Directory of Open Access Journals (Sweden)

    Marzieh Fayazi Borujeni


    in three position of the studied river. The capacity and power of paleoflow are calculated using the maximum clast size in the various gravely sedimentary units. The paleodischarge rate estimation is achieved based on channel cross section area and flow velocity. The cross bedding are used to estimate the maximum paleodepth of current. The vertical variation of sedimentary facies, the thickness variation of cross bedding sets and difference clast size are suggested that the hydrologic conditions are fluctuated. The maximum current power and annual discharge rate is compatible with sediment gravity flow deposits (SG element and the minimum current power and annual discharge rate is related to gravel bars and bedforms (GB element.

  5. Questioning the Sedimentary Paradigm for Granites (United States)

    Glazner, A. F.; Bartley, J. M.; Coleman, D. S.; Boudreau, A.; Walker, J. D.


    A critical question regarding volcano-pluton links is whether plutons are samples of magma that passed through on its way to eruption, or residues left behind after volcanic rocks were extracted. A persistent theme of recent work on granites sensu lato is that many are sedimentary accumulations of crystals that lost significant volumes of magmatic liquid. This view is based on observations of structures that clearly seem to reflect deposition on a magma chamber floor (e.g., flows of chilled mafic magma into silicic magma) and on the inference that many other structures, such as modal layering, truncated layering, and crystal accumulations, reflect crystal sedimentation on such chamber floors. There are significant physical and geochemical reasons to question this view, based on observations in the Sierra Nevada of California and similar results from other batholiths. First, few granites show the enrichments in Ba, Sr, and relative Eu that feldspar accumulation should produce. Second, sedimentary features such as graded bedding and cross-bedding form in highly turbulent flows, but turbulence is unachievable in viscous silicic liquids, where velocities on the order of 104 m/s would be required to induce turbulence in a liquid with η=104 Pa s. Third, tabular modally layered domains commonly cut surrounding modal layering on both sides, and orientations of modal layering and of the troughs of "ladder dikes" commonly scatter widely within hectare-sized areas; it is difficult to reconcile these features with gravity-driven settling. Fourth, accumulations of K-feldspar megacrysts are typically inferred to be depositional, but this is precluded by crystallization of most K- feldspar after rheologic lock-up occurs. Finally, accumulations of K-feldspar and hornblende are typically packed too tightly to be depositional. With analogy to layered mafic intrusions, many features attributed to crystal sedimentation in granites may be better explained by crystal aging and other in

  6. Ore reserve calculations of a sedimentary uranium deposit in Figueira, PR-Brazil

    International Nuclear Information System (INIS)

    Guerra, P.A.G.; Censi, A.C.; Marques, J.P.M.; Huijbregts, Ch.


    The are reserve calculations of a sedimentary uranium deposit in Figueira-PR-Brazil are presented. The evalution of reserves was based on chemical and/or radiometric analisys from boreholes. Geoestatistical methods were used to study the spacial correlation between radiometric and'in situ' uranium content and to calculate the equivalent uranium content without the need for chemical analysis. To this end, a new method was developed based on the regression between accumulated chemical and radiometric grades as determined by increasing thicknesses defined from the maximum peak of the γ-ray logs. Thus, the effect of non-focalization of the probe and of the continuous logging was eliminated. The system of evalution used was two-dimensional using classical Kriging to calculate thicknesses and accumulations determined using distinct cut-off grades. (Author) [pt

  7. Lead Thickness Measurements

    International Nuclear Information System (INIS)

    Rucinski, R.


    The preshower lead thickness applied to the outside of D-Zero's superconducting solenoid vacuum shell was measured at the time of application. This engineering documents those thickness measurements. The lead was ordered in sheets 0.09375-inch and 0.0625-inch thick. The tolerance on thickness was specified to be +/- 0.003-inch. The sheets all were within that thickness tolerance. The nomenclature for each sheet was designated 1T, 1B, 2T, 2B where the numeral designates it's location in the wrap and 'T' or 'B' is short for 'top' or 'bottom' half of the solenoid. Micrometer measurements were taken at six locations around the perimeter of each sheet. The width,length, and weight of each piece was then measured. Using an assumed pure lead density of 0.40974 lb/in 3 , an average sheet thickness was calculated and compared to the perimeter thickness measurements. In every case, the calculated average thickness was a few mils thinner than the perimeter measurements. The ratio was constant, 0.98. This discrepancy is likely due to the assumed pure lead density. It is not felt that the perimeter is thicker than the center regions. The data suggests that the physical thickness of the sheets is uniform to +/- 0.0015-inch.

  8. Marine Science

    African Journals Online (AJOL)

    Aims and scope: The Western Indian Ocean Journal of Marine Science provides an avenue for the wide dissem- ination of high ... or by any means without permission in writing from the copyright holder. ..... Journal of Chemical Engineering Research and Design 82 ... Indian Ocean Marine Science Association Technical.

  9. Marine Biomedicine (United States)

    Bang, Frederik B.


    Describes early scientific research involving marine invertebrate pathologic processes that may have led to new insights into human disease. Discussed are inquiries of Metchnikoff, Loeb, and Cantacuzene (immunolgic responses in sea stars, horseshoe crabs, and marine worms, respectively). Describes current research stemming from these early…

  10. Marine Biology (United States)

    Dewees, Christopher M.; Hooper, Jon K.


    A variety of informational material for a course in marine biology or oceanology at the secondary level is presented. Among the topics discussed are: food webs and pyramids, planktonic blooms, marine life, plankton nets, food chains, phytoplankton, zooplankton, larval plankton and filter feeders. (BT)

  11. hab118_0503b -- Habitat polygons for HMPR-118-2005-03b survey in Olympic Coast national marine sanctuary. (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Benthic habitat polygon coverages are being created for the Olympic Coast national marine sanctuary (OCNMS).ROV, towed camera sled, bathymetry data, sedimentary...

  12. hab113_0401q -- Habitat polygons for HMPR-113-2004-01q survey in Olympic Coast national marine sanctuary. (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Benthic habitat polygon coverages are being created for the Olympic Coast national marine sanctuary (OCNMS).ROV, towed camera sled, bathymetry data, sedimentary...

  13. hab119_0601d -- Habitat polygons for HMPR-119-2006-01d survey in Olympic Coast national marine sanctuary. (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Benthic habitat polygon coverages are being created for the Olympic Coast national marine sanctuary (OCNMS).ROV, towed camera sled, bathymetry data, sedimentary...

  14. hab115_0403 - Habitat polygons for Cape Flattery and Makah Bay area. Results from HMPR-115-2004-03 acoustic survey in Olympic Coast National Marine Sanctuary. (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Benthic habitat polygon coverages are being created for the Olympic Coast national marine sanctuary (OCNMS). ROV, towed camera sled, bathymetry data, sedimentary...

  15. Sedimentary Geothermal Feasibility Study: October 2016

    Energy Technology Data Exchange (ETDEWEB)

    Augustine, Chad [National Renewable Energy Lab. (NREL), Golden, CO (United States); Zerpa, Luis [Colorado School of Mines, Golden, CO (United States)


    The objective of this project is to analyze the feasibility of commercial geothermal projects using numerical reservoir simulation, considering a sedimentary reservoir with low permeability that requires productivity enhancement. A commercial thermal reservoir simulator (STARS, from Computer Modeling Group, CMG) is used in this work for numerical modeling. In the first stage of this project (FY14), a hypothetical numerical reservoir model was developed, and validated against an analytical solution. The following model parameters were considered to obtain an acceptable match between the numerical and analytical solutions: grid block size, time step and reservoir areal dimensions; the latter related to boundary effects on the numerical solution. Systematic model runs showed that insufficient grid sizing generates numerical dispersion that causes the numerical model to underestimate the thermal breakthrough time compared to the analytic model. As grid sizing is decreased, the model results converge on a solution. Likewise, insufficient reservoir model area introduces boundary effects in the numerical solution that cause the model results to differ from the analytical solution.

  16. Tide-Dominated Tract (TDT) as a key sedimentary zone characterizing tide-dominated large-river delta and estuary systems (United States)

    Saito, Y.


    Large rivers in continents have a characteristic of slow rise and fall in water levels during floods or the wet season due to a wide drainage basin. A gentle river gradient and large water discharge have relatively large tidal ranges at the river mouth, resulting in large backwater effects further upstream. The result of the Mekong River survey (386 riverbed sediments, river topography, CTD, and biofacies) shows that the distributary channels of the Mekong River delta in Vietnam are divided into two parts: the landward river-dominated tract (RDT) and seaward tide-dominated tract (TDT). The RDT is characterized by a highly variable and deepening trend in water depth and coarse-grained sediments with a fining trend downstream. The TDT is characterized by a shallowing trend in water depth with river-widening, smooth riverbeds, a straight shape, and heterolithic f- to vf-sand and mud alternation (tidal thythmite). The boundary of both tracts is sharply identified by sediment facies and river morphology. Sediment facies indicates that the dominant sedimentary process of bottom sediments is "bedload" in the RDT and "suspension" in the TDT. Daily tidal changes are observed through the year, while water-level changes during the flood/wet season are limited in the TDT. Saltwater intrusion is limited within the seaward part of the TDT alone ( 50 km), close to final bifurcation points. However, brackish-water biofacies is observed in the TDT mainly due to diluted brackish water and/or tolerance to the freshwater environment. These characteristics are also found in the Yangtze; the distance of the TDT/RDT boundary from the river mouth is ca. 100 km in the Mekong, and 200 km in the Yangtze. The preservation potential of sediments in a TDT is low in a progradational system, and high in abandoned channels. The early Holocene transgressive estuary system in the incised valley of the Yangtze formed during the Last Glacial Maximum was composed of 20 m-thick fine-grained heterolithic

  17. Late quaternary uplift and subsidence of the west coast of Tanna, south Vanuatu, southwest Pacific: U-Th ages of raised coral reefs in the Median Sedimentary Basin

    International Nuclear Information System (INIS)

    Neef, G.; Zhao, J.X.; Collerson, K.D.; Zhang, F.S.


    Twelve Late Quaternary TIMS U-Th ages are reported here from 10 coral samples collected in situ from five transgressive coral/algal raised reefs (height: max. 113m, min. 8m) and two raised lagoonal deposits (height: max. 18 m, min. 8 m) along and near the west coast of Tanna, which lies in the Median Sedimentary Basin of South Vanuatu, southwest Pacific. These reefs and raised lagoonal deposits represent several age groups: (i) 215ka (marine oxygen-isotope stage 7) penultimate interglacial (highest elevation and oldest); (ii) one lagoonal deposit of ca 127 ka (marine oxygen-isotope stage 5e); (iii) three last interglacial reefs with ages 102, 89 and 81 ka (representing marine oxygen-isotope stages 5c, 5b and 5a, respectively, of the latter part of the last interglacial); (iv) a lagoonal deposit with a 92 ka age (5b); and (v) a Holocene reef (age >5.7-5.0 ka) (lowest elevation and youngest). A ca 4.9 ka regressive reef (at elevation of 1.5 m above sea-level) is consistent with an island-wide 6.5m uplift (probably largely coseismic), and a probable further island-wide uplift-occurred in the late Holocene. The U-series ages taken together with the heights of transgressive reefs show that uplift since 215 ka was, on average, at -0.52 mm/y, although since 5 ka the uplift rate was, on average, ∼1.6 mm/y (the assumption being that a 1.5 m above sea-level reef has a coseismic origin) Elevation of transgressive reefs 5a, 5b and 5c and their ages indicates an island-wide subsidence during the period ?124-89 ka (i.e. Late Quaternary uplift/subsidence was jerky). Late Quaternary uplift/subsidence on the northwest coast of Tanna is considered to be due to irregular thickness of crust being subducted beneath Tanna. Copyright (2003) Geological Society of Australia

  18. Education and "Thick" Epistemology (United States)

    Kotzee, Ben


    In this essay Ben Kotzee addresses the implications of Bernard Williams's distinction between "thick" and "thin" concepts in ethics for epistemology and for education. Kotzee holds that, as in the case of ethics, one may distinguish between "thick" and "thin" concepts of epistemology and, further, that this distinction points to the importance of…

  19. Thick film hydrogen sensor (United States)

    Hoffheins, Barbara S.; Lauf, Robert J.


    A thick film hydrogen sensor element includes an essentially inert, electrically-insulating substrate having deposited thereon a thick film metallization forming at least two resistors. The metallization is a sintered composition of Pd and a sinterable binder such as glass frit. An essentially inert, electrically insulating, hydrogen impermeable passivation layer covers at least one of the resistors.

  20. Thick deltaic sedimentation and detachment faulting delay the onset of continental rupture in the Northern Gulf of California: Analysis of seismic reflection profiles (United States)

    Martin, A.; González-Escobar, M.; Fletcher, J. M.; Pacheco, M.; Oskin, M. E.; Dorsey, R. J.


    The transition from distributed continental extension to the rupture of continental lithosphere is imaged in the northern Gulf of California across the obliquely conjugate Tiburón-Upper Delfín basin segment. Structural mapping on a 5-20 km grid of seismic reflection lines of Petroleos Mexicanos (PEMEX) demonstrates that ~1000% extension is accommodated on a series of NNE-striking listric-normal faults that merge at depth into a detachment fault. The detachment juxtaposes a late-Neogene marine sequence over thinned continental crust and contains an intrabasinal divide due to footwall uplift. Two northwest striking, dextral-oblique faults bound both ends of the detachment and shear the continental crust parallel to the tectonic transport. A regional unconformity in the upper 0.5 seconds (TWTT) and crest erosion of rollover anticlines above the detachment indicates inversion and footwall uplift during the lithospheric rupture in the Upper Delfin and Lower Delfin basins. The maximum length of new crust in both Delfin basins is less than 40 km based on the lack of an acoustic basement and the absence of a lower sedimentary sequence beneath a wedge shaped upper sequence that reaches >5 km in thickness. A fundamental difference exists between the Tiburón-Delfin segment and the Guaymas segment to the south in terms of presence of low angle normal faults and amount of new oceanic lithosphere, which we attribute to thermal insulation, diffuse upper-plate extension, and slip on low angle normal faults engendered by a thick sedimentary lid.

  1. Measurement of unsaturated hydraulic properties and evaluation of property-transfer models for deep sedimentary interbeds, Idaho National Laboratory, Idaho (United States)

    Perkins, Kimberlie; Johnson, Brittany D.; Mirus, Benjamin B.


    Operations at the Idaho National Laboratory (INL) have the potential to contaminate the underlying Eastern Snake River Plain (ESRP) aquifer. Methods to quantitatively characterize unsaturated flow and recharge to the ESRP aquifer are needed to inform water-resources management decisions at INL. In particular, hydraulic properties are needed to parameterize distributed hydrologic models of unsaturated flow and transport at INL, but these properties are often difficult and costly to obtain for large areas. The unsaturated zone overlying the ESRP aquifer consists of alternating sequences of thick fractured volcanic rocks that can rapidly transmit water flow and thinner sedimentary interbeds that transmit water much more slowly. Consequently, the sedimentary interbeds are of considerable interest because they primarily restrict the vertical movement of water through the unsaturated zone. Previous efforts by the U.S. Geological Survey (USGS) have included extensive laboratory characterization of the sedimentary interbeds and regression analyses to develop property-transfer models, which relate readily available physical properties of the sedimentary interbeds (bulk density, median particle diameter, and uniformity coefficient) to water retention and unsaturated hydraulic conductivity curves.

  2. A Sedimentary Carbon Inventory for a Scottish Sea Loch (United States)

    Smeaton, Craig; Austin, William; Davies, Althea; Baltzer, Agnes


    Coastal oceans are sites of biogeochemical cycling, as terrestrial, atmospheric, and marine carbon cycles interact. Important processes that affect the carbon cycle in the coastal ocean include upwelling, river input, air-sea gas exchange, primary production, respiration, sediment burial, export, and sea-ice dynamics. The magnitude and variability of many carbon fluxes are accordingly much higher in coastal oceans than in open ocean environments. Having high-quality observations of carbon stocks and fluxes in the coastal environment is important both for understanding coastal ocean carbon balance and for reconciling continent-scale carbon budgets. Despite the ecological, biological, and economic importance of coastal oceans, the magnitude and variability of many of the coastal carbon stocks are poorly quantified in most regions in comparison to terrestrial and deep ocean carbon stocks. The first stage in understanding the carbon dynamics in coastal waters is to quantify the existing carbon stocks. The coastal sediment potentially holds a significant volume of carbon; yet there has been no comprehensive attempt to quantitatively determine the volume of carbon held in those coastal sediments as echoed by Bauer et al., (2013) "the diverse sources and sinks of carbon and their complex interactions in these waters remain poorly understood". We set out to create the first sedimentary carbon inventory for a sea loch (fjord); through a combination of geophysics and biogeochemistry. Two key questions must be answered to achieve this goal; how much sediment is held within the loch and what percentage of that sediment carbon? The restrictive geomorphology of sea lochs (fjords) provides the perfect area to develop this methodology and answer these fundamental questions. Loch Sunart the longest of the Scottish sea lochs is our initial test site due to existing geophysical data being available for analysis. Here we discuss the development of the joint geophysics and

  3. A record of astronomically forced climate change in a late Ordovician (Sandbian) deep marine sequence, Ordos Basin, North China (United States)

    Fang, Qiang; Wu, Huaichun; Hinnov, Linda A.; Wang, Xunlian; Yang, Tianshui; Li, Haiyan; Zhang, Shihong


    The late Ordovician Pingliang Formation on the southwestern margin of the Ordos Basin, North China, consists of rhythmic alternations of shale, limestone, and siliceous beds. To explore the possible astronomical forcing preserved in this lithological record, continuous lithological rank and magnetic susceptibility (MS) stratigraphic series were obtained from a 34 m thick section of the Pingliang Formation at Guanzhuang. Power spectral analysis of the MS and rank series reveal 85.5 cm to 124 cm, 23 cm to 38 cm, and 15 cm to 27 cm thick sedimentary cycles that in ratio match that of late Ordovician short eccentricity, obliquity and precession astronomical cycles. The power spectrum of the MS time series, calibrated to interpreted short orbital eccentricity cycles, aligns with spectral peaks to astronomical parameters, including 95 kyr short orbital eccentricity, 35.3 kyr and 30.6 kyr obliquity, and 19.6 kyr and 16.3 kyr precession cycles. The 15 cm to 27 cm thick limestone-shale couplets mainly represent precession cycles, and siliceous bed deposition may be related to both precession and obliquity forcing. We propose that precession-forced sea-level fluctuations mainly controlled production of lime mud in a shallow marine environment, and transport to the basin. Precession and obliquity controlled biogenic silica productivity, and temperature-dependent preservation of silica may have been influenced by obliquity forcing.

  4. Shell Lip Thickness Is the Most Reliable Proxy to Sexual Maturity in Queen Conch (Lobatus gigas of Port Honduras Marine Reserve, Belize; Informing Management to Reduce the Risk of Growth Overfishing

    Directory of Open Access Journals (Sweden)

    James R. Foley


    Full Text Available Queen conch (Lobatus gigas is an important food source and export product for Belize, where extraction is regulated by shell length (SL and market clean weight (MCW limits. However, lip thickness (LT limits are used to manage juvenile mortality and reduce risk of growth overfishing in other countries. Empirical studies suggest relationships between LT and sexual maturity vary spatially and need to be determined locally. This study was conducted to determine the most reliable, easily measurable proxy indicator(s of maturity and associated target size limits in L. gigas that can effectively restrict harvest of juveniles. Morphological measures (SL, LT, lip width, unprocessed meat weight, MCW, operculum dimensions, gonadosomatic index (GSI and histological evaluations were recorded from L. gigas collected in PHMR before, during, and after the L. gigas closed season. Upon determining Period 2 (during closed season as the peak reproductive period, relationships between these variables in Period 2 were examined. No relationship was found in males between SL and maturity, and was weak in females, whereas there were significant curvilinear relationships between LT and GSI for both sexes, suggesting urgent need to base size limits on LT not SL. LT at which 50% of the population was mature (LT50 was 15.51 mm for females and 12.33 mm for males, therefore a 16 mm LT limit is recommended. MCW of female L. gigas was also significantly related to GSI, indicating MCW may be an appropriate management tool in conjunction with LT as it can be measured at landing sites whereas shells are usually discarded at sea. However, MCW at which 50% of females were mature (MCW50 was 199 g and many individuals exceeding LT50 had MCW <199 g, suggesting the current 85 g MCW limit is too low to protect juveniles yet 199 g MCW limit would be too high to substitute the recommended LT limit at landing sites. To minimize short-term impacts yet maximize long-term benefits to fishers

  5. Tectonostratigraphic reconstruction Cretaceous volcano-sedimentary in the northwestern Andes: from extensional tectonics to arc accretion. (United States)

    Zapata, S.; Patino, A. M.; Cardona, A.; Mejia, D.; Leon, S.; Jaramillo, J. S.; Valencia, V.; Parra, M.; Hincapie, S.


    Active continental margins characterized by continuous convergence experienced overimposed tectonic configurations that allowed the formation of volcanic arcs, back arc basins, transtensional divergent tectonics or the accretion of exotic volcanic terranes. Such record, particularly the extensional phases, can be partially destroyed and obscure by multiple deformational events, the accretion of exotic terranes and strike slip fragmentation along the margin. The tectonic evolution of the northern Andes during the Mesozoic is the result of post Pangea extension followed by the installation of a long-lived Jurassic volcanic arc (209 - 136 ma) that apparently stops between 136 Ma and 110 Ma. The Quebradagrande Complex has been define as a single Lower Cretaceous volcano-sedimentary unit exposed in the western flank of the Central Cordillera of the Colombian Andes that growth after the Late Jurassic to Early Cretaceous magmatic hiatus. The origin of this unit have been related either to an oceanic volcanic arc or a marginal basin environment. The existence of such contrasting models reflect the regional perspective followed in published studies and the paucity of detail analysis of the volcano-sedimentary sequences.We integrate multiple approaches including structural mapping, stratigraphy, geochemistry, U-Pb provenance and geochronology to improve the understanding of this unit and track the earlier phases of accumulation that are mask on the overimposed tectonic history. Our preliminary results suggest the existence of different volcano-sedimentary units that accumulated between 100 Ma and 82 Ma.The older Lower Cretaceous sequences was deposited over Triassic metamorphic continental crust and include a upward basin deepening record characterized by thick fan delta conglomerates, followed by distal turbidites and a syn-sedimentary volcanic record at 100 ma. The other sequence include a 85 - 82 Ma fringing arc that was also formed close to the continental margin or

  6. Alteration of Sedimentary Clasts in Martian Meteorite Northwest Africa 7034 (United States)

    McCubbin, F. M.; Tartese, R.; Santos, A. R.; Domokos, G.; Muttik, N.; Szabo, T.; Vazquez, J.; Boyce, J. W.; Keller, L. P.; Jerolmack, D. J.; hide


    The martian meteorite Northwest Africa (NWA) 7034 and pairings represent the first brecciated hand sample available for study from the martian surface [1]. Detailed investigations of NWA 7034 have revealed substantial lithologic diversity among the clasts [2-3], making NWA 7034 a polymict breccia. NWA 7034 consists of igneous clasts, impact-melt clasts, and "sedimentary" clasts represented by prior generations of brecciated material. In the present study we conduct a detailed textural and geochemical analysis of the sedimentary clasts.

  7. Marine Science

    African Journals Online (AJOL)

    between humans and the coastal and marine environment. ... The journal has a new and more modern layout, published online only, and the editorial .... the population structure of Platorchestia fayetta sp. nov. and their interaction with the.

  8. Marine Science

    African Journals Online (AJOL)

    Aims and scope: The Western Indian Ocean Journal of Marine Science provides an avenue for the ... tidal height and amplitude can influence light penetra- ...... to environmental parameters in cage culture area of Sepanggar Bay, Malaysia.

  9. Marine Science

    African Journals Online (AJOL)

    Aims and scope: The Western Indian Ocean Journal of Marine Science provides an avenue for the wide dissem- ... consist of special issues on major events or important thematic issues. ... of sources, including plant and animal by- products.

  10. Marine biotoxins

    National Research Council Canada - National Science Library


    ... (ciguatera fish poisoning). It discusses in detail the causative toxins produced by marine organisms, chemical structures and analytical methods, habitat and occurrence of the toxin-producing organisms, case studies and existing regulations...

  11. Marine Science

    African Journals Online (AJOL)

    pod diversity and distribution are important especially since studies on marine biodiversity are scarce .... Method II –. Zamoum &. Furla (2012) protocol. Method III. – Geist et al (2008) protocol ..... Public Library Of Science One 8: 51273.

  12. Marine pollution

    International Nuclear Information System (INIS)

    Clark, R.B.


    The effects of petroleum, waste materials, halogenated hydrocarbons, radioactivity and heat on the marine ecosystem, the fishing industry and human health are discussed using the example of the North Sea. (orig.) [de

  13. Marine Science

    African Journals Online (AJOL)

    No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form ... to optimize nucleic acid extraction protocols from marine gastropods, present an ...... Greenfield., Gomez E, Harvell CD, Sale PF, Edwards.

  14. Marine Science

    African Journals Online (AJOL)

    Aims and scope: The Western Indian Ocean Journal of Marine Science provides an avenue for the wide dissem- ination of high ..... circulation patterns include the nutrient-rich Somali ...... matical Structures in Computer Science 24: e240311.

  15. Marine insects

    National Research Council Canada - National Science Library

    Cheng, Lanna


    .... Not only are true insects, such as the Collembola and insect parasites of marine birds and mammals, considered, but also other kinds of intertidal air-breathing arthropods, notably spiders, scorpions...

  16. Marine Science

    African Journals Online (AJOL)

    Aims and scope: The Western Indian Ocean Journal of Marine Science provides an avenue .... shell growth is adversely affected. ... local stressors in action, such as ocean acidification ..... that the distribution of many intertidal sessile animals.

  17. Different controls on sedimentary organic carbon in the Bohai Sea: River mouth relocation, turbidity and eutrophication (United States)

    Xu, Yunping; Zhou, Shangzhe; Hu, Limin; Wang, Yinghui; Xiao, Wenjie


    The extractable lipids and bulk organic geochemical parameters in three sediment cores (M-1, M-3 and M-7) from southern, central and northern Bohai Sea were analyzed in order to reconstruct environmental changes since 1900. The C/N ratio and multiple biomarkers (e.g., C27 + C29 + C31n-alkanes, C24 + C26 + C28n-alkanols, branched versus isoprenoid tetraether index) suggest more terrigenous organic carbon (OC) inputs in southern Bohai Sea. The abrupt changes of biomarker indicators in core M-1 are generally synchronous with the Yellow River mouth relocation events (e.g., 1964, 1976 and 1996), suggesting the distance to the river mouth being an important factor for sedimentary OC dispersal in the southern Bohai Sea. However, in cores M-3 and M-7, terrigenous biomarkers (i.e., BIT) show a long-term declining trend, consistent with a continuous reduction of the Yellow River sediment load, whereas marine biomarkers such as cholesterol, brassicasterol and dinosterol dramatically increased post-1980, apparently related to human-induced eutrophication in the Bohai Sea. Our study suggests different controlling factors on sedimentary OC distribution in the southern (high turbidity) and other parts (less turbidity) of the Bohai Sea, which should be considered for interpretation of paleoenvironments and biogeochemical processes in the river dominated margins that are hotspots of the global carbon cycling.

  18. Morphology and modern sedimentary deposits of the macrotidal Marapanim Estuary (Amazon, Brazil) (United States)

    Araújo da Silva, Cléa; Souza-Filho, Pedro Walfir M.; Rodrigues, Suzan W. P.


    The northern Brazilian coast, east of the Amazon River is characterized by several macrotidal estuarine systems that harbor large mangrove areas with approximately 7600 km 2. The Marapanim Estuary is influenced by macrotidal regime with moderate waves influence. Morphologic units were investigated by using remote sensing images (i.e., Landsat-7 ETM+, RADARSAT- 1 Wide and SRTM) integrated with bathymetric data. The modern sedimentary deposits were analyzed from 67 cores collected by Vibracore and Rammkersonde systems. Analysis of morphology and surface sedimentary deposits of the Marapanim River reveal they are strongly influenced by the interaction of tidal, wave and fluvial currents. Based on these processes it was possible to recognize three distinct longitudinal facies zonation that revels the geological filling of a macrotidal estuary. The estuary mouth contain fine to medium marine sands strongly influenced by waves and tides, responsible for macrotidal sandy beaches and estuarine channel development, which are characterized by wave-ripple bedding and longitudinal cross-bedding sands. The estuary funnel is mainly influenced by tides that form wide tidal mudflats, colonized by mangroves, along the estuarine margin, with parallel laminations, lenticular bedding, root fragments and organic matter lenses. The upstream estuary contains coarse sand to gravel of fluvial origin. Massive mud with organic matter lenses, marks and roots fragments occur in the floodplain accumulates during seasonal flooding providing a slowly aggrading in the alluvial plain. This morphologic and depositional pattern show easily a tripartite zonation of a macrotidal estuary, that are in the final stage of filling.

  19. Late to middle Pleistocene Arctic glacial history implied from a sedimentary record from the Northwind Ridge (United States)

    Liu, Y.; Dong, L.; Shi, X.; Zhu, A.


    Abstract: Sediment core ARC6-C21 collected from the Northwind Ridge, western Arctic Ocean, covers the late to middle Quaternary (Marine Isotope Stages (MIS) 1-11), as estimated by correlation to earlier proposed Arctic Ocean stratigraphies and AMS14C dating of the youngest sediments. Detailed examination of the elemental composition of sediment along with grain size in core ARC6-C21 provides important new information about sedimentary environments and provenance. We use increased contents of coarse debris as an indicator of glacier collapse events at the margins of the western Arctic Ocean, and identify the provenance of these events from geochemical composition. Notably, peaks of MgO and CaO, including large dropstones, presumably track the Laurentide Ice Sheet (LIS) discharge events to the Arctic Ocean. Major LIS inputs occurred during the stratigraphic intervals estimated as MIS 3, intra-MIS 5 and 7 events, MIS 8, and MIS 10. Inputs from the East Siberian Ice Sheet (ESIS) and/or Eurasia Ice Sheet (EIS)are inferred from peaks of SiO2, K2O and Na2O associated with coarse sediment. Major ESIS and/or EIS sedimentary events occurred in the intervals estimated as MIS 2, MIS 4, MIS 6, MIS 8 and MIS 10. Keywords: Sediment core, Pleistocene, western Arctic Ocean, geochemistry, grain size, sediment provenance, glaciations

  20. [Distribution Characteristics of Sedimentary Pigments in the Changjiang Estuary and Zhe-Min Coast and its Implications]. (United States)

    Li, Dong; Yao, Peng; Zhao, Bin; Wang, Jin-peng; Pan, Hui-hui


    higher sedimentary pigment preservation efficiencies were probably ideal areas for the marine eco-environmental evolutions. The bad sedimentary environment caused by the water exchange inside and outside of Hangzhou Bay was the dominant reason for the low sedimentary pigment contents and preservation efficiencies in this region.

  1. Sedimentary Fatty Alcohols in Kapas Island, Terengganu

    International Nuclear Information System (INIS)

    Noor Farahin Amiruddin; Mohamad Iznul Muazim Mohamad Zabidi; Nurul Fathihah Mt Nanyan; Masni Mohd Ali; Masni Mohd Ali


    A geochemical study was carried out to identify the composition and sources of fatty alcohols in Kapas Island, Terengganu, Malaysia. Fatty alcohols in surface sediments were extracted and analyzed using Gas Chromatography - Mass Spectrometry (GC-MS). A total of 23 fatty alcohol compounds were identified in the Kapas Island sediment. Total concentrations of fatty alcohols ranged from 0.53 to 21.31 ng/ g dry weight and the highest total concentration was found at S2, which is probably due to its location profile that is located north of Kapas Island which is close to several small islands. The short chain/ long chain fatty alcohol ratio and alcohol source index (ASI) were used together to identify the dominant input in Kapas Island. Kapas Island sediments contained a mixture of organic sources, of which terrestrial sources were indicated to be the most abundant sources in these marine sediments. (author)

  2. Sedimentary and faunal sequence of the Wadhurst clay Wealden in boreholes at Wadhurst Park, Sussex

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, F W; Bazley, R A.B.; Shephard-Thorn, E R


    Three boreholes sunk at Wadhurst Park, Sussex, provide a virtually complete section through the Wadhurst Clay (Wealden, Lower Cretaceous) in its type area. Full lithological logs of the boreholes with discussions of rock types, sedimentary features and depositional environments are given. It is suggested the sediments were deposited under shallow-water lagoonal conditions which varied from fresh-water to brackish and possibly marine. The succession of ostracod assemblages as found in the boreholes is recorded and compared with that found in the Warlingham (Surrey), Chilcombe Down No. 1 (Hampshire) and Kingsclere No. 1 (Hampshire) boreholes. Ostracods including a number of new species and subspecies, all belonging to the genus Cypridea, are described together with notes on the morphology of that genus. (22 refs.)

  3. Age, sedimentary environments, and other aspects of sandstone and related host rocks for uranium deposits

    International Nuclear Information System (INIS)


    Project II of the Uranium Geology Working Group was assigned to the study of sedimentary basins and sandstone - type uranium deposits. About 40% of the worlds's uranium resources are contained in sandstone-type deposits, which has led to extensive research. The research was carried out mainly by correspondence, and the results reported by 21 geologists from 10 nations are summarized in this report. It investigated five topics dealing with important aspects of the geology of uranium ores in sandstone host formations: age of host rock; partitioning of uranium between continental and marine sediments; latitude limitation on formation of sandstone deposits; effect of rock formation dip on sandstone ores; usefulness of stable isotope and fluid inclusion studies. The results of studies on these subjects form part of a wider programme of the Working Group, whose final results will be presented at the 27th International Geological Congress in Moscow in 1984

  4. Late Paleozoic paleofjord in the southernmost Parana Basin (Brazil): Geomorphology and sedimentary fill (United States)

    Tedesco, Julia; Cagliari, Joice; Coitinho, Julia dos Reis; da Cunha Lopes, Ricardo; Lavina, Ernesto Luiz Correa


    In the southernmost part of the Parana Basin, records of the late Paleozoic glaciation occur in a discontinuous form preserved in paleovalley systems excavated in the crystalline basement. This paper addresses one of these paleovalleys, the Mariana Pimentel, which extends over 60 km with NW-SE valley direction and a constant width of 2.5 km. With the objective of demonstrating that the paleovalley worked as a fjord during the glaciation period, its origin as well as sedimentary fill and morphology were analyzed. The paleovalley morphology was obtained through electrical resistivity (electrical sounding and lateral mapping) and mathematical modeling in four transverse sections. The morphology of the paleovalley documented by the U-shape, steady width, and high depth reaching up to 400 m are typical features of modern glacial valleys. The sedimentary facies that fill the base of the paleovalley, such as rhythmites and dropstones with thickness up to 70 m and diamictites with faceted pebbles (up to 5 m thick) are signs of its glacial origin. During the glaciation period, the paleovalley had a connection to the epicontinental sea located to the northwest, extended toward Namibia, and was excavated by glaciers from the highlands of this region. Thus, the evidence attests that the Mariana Pimentel paleovalley was a fjord during the late Paleozoic glaciation. The duration of the late Paleozoic glaciation (which is longer than the Quaternary glaciation), the apatite fission track that suggests erosion up to 4 km thick in the study area, and the lack of preserved hanging valleys in the Mariana Pimentel indicate that the paleovalley once featured a higher dimension. Furthermore, the existence of paleofjords excavated in the border of the basement corroborates the idea of small ice centers controlled by topography during the late Paleozoic glaciation.

  5. 3D coupled heat and mass transfer processes at the scale of sedimentary basisn (United States)

    Cacace, M.; Scheck-Wenderoth, M.; Kaiser, B. O.


    We use coupled 3D simulations of fluid, heat, and transport based on a 3D structural model of a complex geological setting, the Northeast German Basin (NEGB). The geological structure of the NEGB is characterized by a relatively thick layer of Permian Zechstein salt, structured in differnet diapirs (up to 5000 m thick) and pillows locally reaching nearly the surface. Salt is thermally more conductive than other sediments, hydraulically impervious but highly solvable. Thus salt structures have first order influence on the temperature distribution, the deep flow regime and the salinity of groundawater bearing aquifers. In addition, the post-Permian sedimentary sequence is vertically subdivided into several aquifers and aquitards. The shallow Quaternary to late Tertiary freshwater aquifer is separated from the underlying Mesozoic saline aquifers by an embedded Tertiary clay enriched aquitard (Rupelian Aquitard). An important feature of this aquitard is that hydraulic connections between the upper and lower aquifers exist in areas where the Rupelian Aquitard is missing (hydrogeological windows). By means of 3D numerical simulations we explore the role of heat conduction, pressure, and density driven groundwater flow as well as fluid viscosity-related and salinity-dependent effects on the resulting flow and temperature fields. Our results suggest that the regional temperature distribution within the basin results from interactions between regional pressure forces and thermal diffusion locally enhanced by thermal conductivity contrasts between the different sedimentary rocks with the highly conductive salt. Buoyancy forces triggered by temperature-dependent fluid density variations affect only locally the internal thermal configuration. Locations, geometry, and wavelengths of convective thermal anomalies are mainly controlled by the permeability field and thickness values of the respective geological layers. Numerical results from 3D thermo-haline numerical simulations

  6. Ocean Sediment Thickness Contours (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Ocean sediment thickness contours in 200 meter intervals for water depths ranging from 0 - 18,000 meters. These contours were derived from a global sediment...

  7. Microfacies, Sedimentary Environment and Relative Sea Level Changes of the Ruteh Formation, Sangsar and Makaroud Sections, Central Alborz

    Directory of Open Access Journals (Sweden)

    Leili Bastami


    -red S solution according to Dickson (1965 method. The grain and matrix percentages were estimated using visual percentage charts of Bacelle and Bosellini (1965. Dunham (1962 classification were used for carbonate facies nomenclature. Based on lithological and textural characteristics, fossil content, abiotic allochems, facies succession and their comparision with well studied environments by Flugel (2010, microfacies and their subenvironments have been identified. In this study investigation of relative sea level changes is on the basis of field observations and facies analysis. Based on the vertical succession of microfacies and sedimentary paleoenvironmental features, Systems tracts and sedimentary sequences have been recognized. Discussion of Results & Conclusions Field and petrographic studies at the Sangsar and Makaroud sections, indicate that the Ruteh Formation sediments consist of 19 carbonate microfacies and one siliciclastic petrofacies that during the Middle Permian times deposited in tidal flat to open marine facies belts of a bioclastic homoclinal carbonate ramp on the southern passive margin of the Paleotethys located on the northern Gondwana Supercontinent in a tropical region. Tidal flat facies belt includes: Dolomitic mudstone, lime mudstone to sandy lime mudstone, pelloid intraclast packstone and one quartzarenite siliciclastic petrofacies. Lagoon facies belt includes: bioclast mudstone, dasycladacea wackestone, foraminifera pelloid wackestone, bioclast pelloid wackestone,  bioclast tubiphytes wackestone, bioclast algal wackestone/packstone. Shoal facies belt includes: ooid pelloid packstone/grainstone, bioclast pelloid packstone/grainstone, pelloid bioclast grainstone and algal packstone/grainstone. Open marine facies belt includes: tubiphytes gymnocodiacea wackestone, gymnocodiacea packstone, bioclast gymnocodiacea wackestone, sponge spicule bioclast wackestone, crinoid mudstone/wackestone and bioclast mudstone.  The Ruteh Formation at both

  8. Dolomitization and sedimentary cyclicity of the Ordovician, Silurian, and Devonian rocks in South Estonia

    Directory of Open Access Journals (Sweden)

    Kallaste, Toivo


    Full Text Available The distribution and composition of dolomitized rocks and stoichiometry of dolomite in southern Estonia in the Ordovician, Silurian, and Devonian were studied on the background of the facies, sedimentary cyclicity (nine shallowing-up cycles, and evolution of the palaeobasins. The composition of rocks and lattice parameters of dolomite were investigated using the X-ray diffraction, X-ray fluorescence, titration and gravimetric analyses, and porosity measurements. The formation of dolostones is directly determined by the cyclic evolution of palaeobasins. Dolomitized rocks belong to the shallow-water inner shelf or tidal/lagoonal facies belt of regressive phases of sedimentary cycles. Sediments of the deep shelf/transitional environment and transgressive phases are not dolomitized. The most stoichiometric is secondary replacive dolomite of Silurian and upper Ordovician dolostones, formed during the early diagenesis of normal-marine (saline shallow-shelf calcitic sediments. The content of insoluble residue does not affect the stoichiometry. The changes in lattice parameters are induced by the Ca/Mg ratio in the dolomite lattice. The dolomite of the dolostones contacting limestone or containing calcite has an expanded lattice. The primary (syngenetic dolostone of the lagoonal or tidal flat belt has also an expanded lattice. No dolomitizing effect of the waters of the Devonian palaeobasin on the underlying rocks was revealed. The whole data set of the studied dolostones is consistent with the marine water environment in the palaeobasin at the corresponding time and shows no sign of the inflow of external fluids. It suggests that the microbial model of dolomite formation may characterize the Ordovician, Silurian, and Devonian in southern Estonia. The occurrence of dolostones between undolomitized rocks limits the time of dolomitization to the early diagenetic stage.

  9. High frequency of phylogenetically diverse reductive dehalogenase-homologous genes in deep subseafloor sedimentary metagenomes

    Directory of Open Access Journals (Sweden)

    Mikihiko eKawai


    Full Text Available Marine subsurface sediments on the Pacific margin harbor diverse microbial communities even at depths of several hundreds meters below the seafloor (mbsf or more. Previous PCR-based molecular analysis showed the presence of diverse reductive dehalogenase gene (rdhA homologs in marine subsurface sediment, suggesting that anaerobic respiration of organohalides is one of the possible energy-yielding pathways in the organic-rich sedimentary habitat. However, primer-independent molecular characterization of rdhA has remained to be demonstrated. Here, we studied the diversity and frequency of rdhA homologs by metagenomic analysis of five different depth horizons (0.8, 5.1, 18.6, 48.5 and 107.0 mbsf at Site C9001 off the Shimokita Peninsula of Japan. From all metagenomic pools, remarkably diverse rdhA-homologous sequences, some of which are affiliated with novel clusters, were observed with high frequency. As a comparison, we also examined frequency of dissimilatory sulfite reductase genes (dsrAB, key functional genes for microbial sulfate reduction. The dsrAB were also widely observed in the metagenomic pools whereas the frequency of dsrAB genes was generally smaller than that of rdhA-homologous genes. The phylogenetic composition of rdhA-homologous genes was similar among the five depth horizons. Our metagenomic data revealed that subseafloor rdhA homologs are more diverse than previously identified from PCR-based molecular studies. Spatial distribution of similar rdhA homologs across wide depositional ages indicates that the heterotrophic metabolic processes mediated by the genes can be ecologically important, functioning in the organic-rich subseafloor sedimentary biosphere.

  10. Infrared sensing and the measurement of oil slick thickness

    International Nuclear Information System (INIS)

    Brown, H.M.; Baschuk, J.J.; Goodman, R.H.


    The issue of whether infrared images can be used to detect the thickness of a marine oil spill was discussed. Infrared images of oil spills on water show density variations because of variations in oil temperature and emissivity. These observations have been used to determine thickness variations in the oil. Experiments were conducted in a large wave basin using two typical crude oils in the thickness range of 1 mm to 10 mm. Infrared images of oil spills were recorded and simultaneous thickness measurements were made using an acoustic thickness gauge. The study showed that there is no relationship between infrared image pixel greyness and the thickness measured with an acoustic probe. It was not possible to determine the volume of a spill using infrared images. 2 refs., 1 tab., 4 figs

  11. Sedimentary and Vegetative Impacts of Hurricane Irma to Coastal Wetland Ecosystems across Southwest Florida (United States)

    Moyer, R. P.; Khan, N.; Radabaugh, K.; Engelhart, S. E.; Smoak, J. M.; Horton, B.; Rosenheim, B. E.; Kemp, A.; Chappel, A. R.; Schafer, C.; Jacobs, J. A.; Dontis, E. E.; Lynch, J.; Joyse, K.; Walker, J. S.; Halavik, B. T.; Bownik, M.


    Since 2014, our collaborative group has been working in coastal marshes and mangroves across Southwest Florida, including Tampa Bay, Charlotte Harbor, Ten Thousand Islands, Biscayne Bay, and the lower Florida Keys. All existing field sites were located within 50 km of Hurricane Irma's eye path, with a few sites in the Lower Florida Keys and Naples/Ten Thousand Islands region suffering direct eyewall hits. As a result, we have been conducting storm-impact and damage assessments at these locations with the primary goal of understanding how major hurricanes contribute to and/or modify the sedimentary record of mangroves and salt marshes. We have also assessed changes to the vegetative structure of the mangrove forests at each site. Preliminary findings indicate a reduction in mangrove canopy cover from 70-90% pre-storm, to 30-50% post-Irma, and a reduction in tree height of approximately 1.2 m. Sedimentary deposits consisting of fine carbonate mud up to 12 cm thick were imported into the mangroves of the lower Florida Keys, Biscayne Bay, and the Ten Thousand Islands. Import of siliciclastic mud up to 5 cm thick was observed in Charlotte Harbor. In addition to fine mud, all sites had imported tidal wrack consisting of a mixed seagrass and mangrove leaf litter, with some deposits as thick as 6 cm. In areas with newly opened canopy, a microbial layer was coating the surface of the imported wrack layer. Overwash and shoreline erosion were also documented at two sites in the lower Keys and Biscayne Bay, and will be monitored for change and recovery over the next few years. Because active research was being conducted, a wealth of pre-storm data exists, thus these locations are uniquely positioned to quantify hurricane impacts to the sedimentary record and standing biomass across a wide geographic area. Due to changes in intensity along the storm path, direct comparisons of damage metrics can be made to environmental setting, wind speed, storm surge, and distance to eyewall.

  12. Alteration of immature sedimentary rocks on Earth and Mars. Recording Aqueous and Surface-atmosphere Processes

    Energy Technology Data Exchange (ETDEWEB)

    Cannon, Kenneth M. [Brown Univ., Providence, RI (United States); Mustard, John F. [Brown Univ., Providence, RI (United States); Salvatore, Mark R. [Arizona State Univ., Mesa, AZ (United States)


    The rock alteration and rind formation in analog environments like Antarctica may provide clues to rock alteration and therefore paleoclimates on Mars. Clastic sedimentary rocks derived from basaltic sources have been studied in situ by martian rovers and are likely abundant on the surface of Mars. Moreover, how such rock types undergo alteration when exposed to different environmental conditions is poorly understood compared with alteration of intact basaltic flows. Here we characterize alteration in the chemically immature Carapace Sandstone from Antarctica, a terrestrial analog for martian sedimentary rocks. We employ a variety of measurements similar to those used on previous and current Mars missions. Laboratory techniques included bulk chemistry, powder X-ray diffraction (XRD), hyperspectral imaging and X-ray absorption spectroscopy. Through these methods we find that primary basaltic material in the Carapace Sandstone is pervasively altered to hydrated clay minerals and palagonite as a result of water–rock interaction. A thick orange rind is forming in current Antarctic conditions, superimposing this previous aqueous alteration signature. The rind exhibits a higher reflectance at visible-near infrared wavelengths than the rock interior, with an enhanced ferric absorption edge likely due to an increase in Fe3+ of existing phases or the formation of minor iron (oxy)hydroxides. This alteration sequence in the Carapace Sandstone results from decreased water–rock interaction over time, and weathering in a cold, dry environment, mimicking a similar transition early in martian history. This transition may be recorded in sedimentary rocks on Mars through a similar superimposition mechanism, capturing past climate changes at the hand sample scale. These results also suggest that basalt-derived sediments could have sourced significant volumes of hydrated minerals on early Mars due to their greater permeability compared with intact igneous rocks.

  13. Subsurface temperature maps in French sedimentary basins: new data compilation and interpolation

    International Nuclear Information System (INIS)

    Bonte, D.; Guillou-Frottier, L.; Garibaldi, C.; Bourgine, B.; Lopez, S.; Bouchot, V.; Garibaldi, C.; Lucazeau, F.


    Assessment of the underground geothermal potential requires the knowledge of deep temperatures (1-5 km). Here, we present new temperature maps obtained from oil boreholes in the French sedimentary basins. Because of their origin, the data need to be corrected, and their local character necessitates spatial interpolation. Previous maps were obtained in the 1970's using empirical corrections and manual interpolation. In this study, we update the number of measurements by using values collected during the last thirty years, correct the temperatures for transient perturbations and carry out statistical analyses before modelling the 3D distribution of temperatures. This dataset provides 977 temperatures corrected for transient perturbations in 593 boreholes located in the French sedimentary basins. An average temperature gradient of 30.6 deg. C/km is obtained for a representative surface temperature of 10 deg. C. When surface temperature is not accounted for, deep measurements are best fitted with a temperature gradient of 25.7 deg. C/km. We perform a geostatistical analysis on a residual temperature dataset (using a drift of 25.7 deg. C/km) to constrain the 3D interpolation kriging procedure with horizontal and vertical models of variograms. The interpolated residual temperatures are added to the country-scale averaged drift in order to get a three dimensional thermal structure of the French sedimentary basins. The 3D thermal block enables us to extract isothermal surfaces and 2D sections (iso-depth maps and iso-longitude cross-sections). A number of anomalies with a limited depth and spatial extension have been identified, from shallow in the Rhine graben and Aquitanian basin, to deep in the Provence basin. Some of these anomalies (Paris basin, Alsace, south of the Provence basin) may be partly related to thick insulating sediments, while for some others (southwestern Aquitanian basin, part of the Provence basin) large-scale fluid circulation may explain superimposed

  14. Sedimentary features and exploration targets of Middle Permian reservoirs in the SW Sichuan Basin

    Directory of Open Access Journals (Sweden)

    Guoming Xu


    Full Text Available The exploration direction and targets for the large-scale Middle Permian gas reservoirs in the Sichuan Basin are hot spots and challenges in current exploration researches. The exploration successes of large gas field of Cambrian Longwangmiao Formation in Gaoshiti-Moxi region, Central Sichuan Basin, indicated that prospective sedimentary facies belt was the basis for the formation of large gas fields. In this paper, based on seismic data, outcrop data and drilling data, the tectonic framework and sedimentary features of the Middle Permian in the SW Sichuan Basin were comprehensively studied. The following conclusions were reached from the perspective of sedimentary facies control: (1 during the Middle Permian, this region was in shallow water gentle slope belts with high energy, where thick reef flat facies were deposited; (2 the basement was uplifted during Middle Permian, resulting in the unconformity weathering crust at the top of Maokou Formation due to erosion; the SW Sichuan Basin was located in the karst slope belt, where epigenic karstification was intense; and (3 reef flat deposits superimposed by karst weathering crust was favorable for the formation of large-scale reef flat karst reservoirs. Based on the combination of the resources conditions and hydrocarbon accumulation conditions in this region, it was pointed out that the Middle Permian has great potential of large-scale reef flat karst gas reservoir due to its advantageous geological conditions; the Middle Permian traps with good hydrocarbon accumulation conditions were developed in the Longmen Mountain front closed structural belt in the SW Sichuan Basin and Western Sichuan Basin depression slope belt, which are favorable targets for large-scale reef flat karst reservoirs.

  15. Sedimentary controls on modern sand grain coat formation (United States)

    Dowey, Patrick J.; Worden, Richard H.; Utley, James; Hodgson, David M.


    Coated sand grains can influence reservoir quality evolution during sandstone diagenesis. Porosity can be reduced and fluid flow restricted where grain coats encroach into pore space. Conversely pore-lining grain coats can restrict the growth of pore-filling quartz cement in deeply buried sandstones, and thus can result in unusually high porosity in deeply buried sandstones. Being able to predict the distribution of coated sand grains within petroleum reservoirs is thus important to help find good reservoir quality. Here we report a modern analogue study of 12 sediment cores from the Anllóns Estuary, Galicia, NW Spain, collected from a range of sub-environments, to help develop an understanding of the occurrence and distribution of coated grains. The cores were described for grain size, bioturbation and sedimentary structures, and then sub-sampled for electron and light microscopy, laser granulometry, and X-ray diffraction analysis. The Anllóns Estuary is sand-dominated with intertidal sand flats and saltmarsh environments at the margins; there is a shallowing/fining-upwards trend in the estuary-fill succession. Grain coats are present in nearly every sample analysed; they are between 1 μm and 100 μm thick and typically lack internal organisation. The extent of grain coat coverage can exceed 25% in some samples with coverage highest in the top 20 cm of cores. Samples from muddy intertidal flat and the muddy saltmarsh environments, close to the margins of the estuary, have the highest coat coverage (mean coat coverage of 20.2% and 21.3%, respectively). The lowest mean coat coverage occurs in the sandy saltmarsh (10.4%), beyond the upper tidal limit and sandy intertidal flat environments (8.4%), close to the main estuary channel. Mean coat coverage correlates with the concentration of clay fraction. The primary controls on the distribution of fine-grained sediment, and therefore grain coat distribution, are primary sediment transport and deposition processes that

  16. Marine and fluvial facies modelling at petroleum reservoir scale; Modelisation des heterogeneites lithologiques a l'echelle du reservoir petrolier en milieu marin et fluviatile

    Energy Technology Data Exchange (ETDEWEB)

    Leflon, B.


    When modelling a petroleum reservoir, well data are very useful to model properties at a sub-seismic scale. Petrophysical properties like porosity or permeability are linked to the rock-type. Two methods based on well data have been developed to model facies. The first one is used to model marine carbonates deposits. The geometry of sedimentary layers is modelled through a special parameterization of the reservoir similar to Wheeler space. The time parameter is defined along the well paths thanks to correlations. The layer thickness is then extrapolated between wells. A given relationship between facies and bathymetry of sedimentation makes it possible to compute bathymetry along the well paths. Bathymetry is then extrapolated from wells and a reference map using the concept of accommodation. The model created this way is stratigraphically consistent. Facies simulation can then be constrained by the computed bathymetry. The second method describes a novel approach to fluvial reservoirs modelling. The core of the method lies in the association of a fairway with the channels to be simulated. Fairways are positioned so that all data are taken in account; they can be stochastic if unknown or explicitly entered if identified on seismic data. A potential field is defined within the fairway. Specifying a transfer function to map this potential field to thickness results in generating a channel inside the fairway. A residual component is stochastically simulated and added to the potential field creating realistic channel geometries. Conditioning to well data is obtained by applying the inverse transfer function at the data location to derive thickness values that will constrain the simulation of residuals. (author)


    Energy Technology Data Exchange (ETDEWEB)

    Thaddeus S. Dyman; Troy Cook; Robert A. Crovelli; Allison A. Henry; Timothy C. Hester; Ronald C. Johnson; Michael D. Lewan; Vito F. Nuccio; James W. Schmoker; Dennis B. Riggin; Christopher J. Schenk


    From a geological perspective, deep natural gas resources are generally defined as resources occurring in reservoirs at or below 15,000 feet, whereas ultra-deep gas occurs below 25,000 feet. From an operational point of view, ''deep'' is often thought of in a relative sense based on the geologic and engineering knowledge of gas (and oil) resources in a particular area. Deep gas can be found in either conventionally-trapped or unconventional basin-center accumulations that are essentially large single fields having spatial dimensions often exceeding those of conventional fields. Exploration for deep conventional and unconventional basin-center natural gas resources deserves special attention because these resources are widespread and occur in diverse geologic environments. In 1995, the U.S. Geological Survey estimated that 939 TCF of technically recoverable natural gas remained to be discovered or was part of reserve appreciation from known fields in the onshore areas and State waters of the United. Of this USGS resource, nearly 114 trillion cubic feet (Tcf) of technically-recoverable gas remains to be discovered from deep sedimentary basins. Worldwide estimates of deep gas are also high. The U.S. Geological Survey World Petroleum Assessment 2000 Project recently estimated a world mean undiscovered conventional gas resource outside the U.S. of 844 Tcf below 4.5 km (about 15,000 feet). Less is known about the origins of deep gas than about the origins of gas at shallower depths because fewer wells have been drilled into the deeper portions of many basins. Some of the many factors contributing to the origin of deep gas include the thermal stability of methane, the role of water and non-hydrocarbon gases in natural gas generation, porosity loss with increasing thermal maturity, the kinetics of deep gas generation, thermal cracking of oil to gas, and source rock potential based on thermal maturity and kerogen type. Recent experimental simulations

  18. Monitoring production target thickness

    International Nuclear Information System (INIS)

    Oothoudt, M.A.


    Pion and muon production targets at the Clinton P. Anderson Meson Physics Facility consist of rotating graphite wheels. The previous target thickness monitoring Procedure scanned the target across a reduced intensity beam to determine beam center. The fractional loss in current across the centered target gave a measure of target thickness. This procedure, however, required interruption of beam delivery to experiments and frequently indicated a different fractional loss than at normal beam currents. The new monitoring Procedure compares integrated ups and downs toroid current monitor readings. The current monitors are read once per minute and the integral of readings are logged once per eight-hour shift. Changes in the upstream to downstream fractional difference provide a nonintrusive continuous measurement of target thickness under nominal operational conditions. Target scans are now done only when new targets are installed or when unexplained changes in the current monitor data are observed

  19. Precise natural radiography of seafloor sedimentary cores by using imaging plate

    International Nuclear Information System (INIS)

    Sugihara, Makoto; Tsuchiya, Noriyoshi


    The radiation measurement for seafloor sedimentary cores was carried out by using the Imaging Plate (IP). The precise natural radiography was obtained with 48 hours (exposure time) in a shield box. Layered structures of seafloor sediments that have relatively low radioactivity like biogenic matters could be detected by autoradiography, and it was possible to identify optically unclear layers of sediments with differences of radiation characteristics. The detection limit of thickness of suspended particle layers like volcanic ashes might be sub millimeters. It was possible to identify the pinpoint position where radioactive mineral emitted α-rays at the surface of sample. Identification of pinpoint position could be possible suppose radioactive minerals that emits α-ray exposed at the surface of sample. Distribution of dose (PSL value of IP) was related to CT value (X-ray CT), which indicates dose of sedimentary core have relationships with density and atomic number of sediments. The natural radiography for seafloor sediments cores by using the Imaging Plate is considered to be a powerful new tool as a non-destructive core analysis. (author)

  20. Otters, Marine (United States)

    Estes, James A.; Bodkin, James L.; Ben-David, M.; Perrin, William F.; Würsing, Bernd; Thewissen, J.G.M.


    The otters (Mustelidae; Lutrinae) provide an exceptional perspective into the evolution of marine living by mammals. Most extant marine mammals (e.g. the cetaceans, pinnipeds, and sirenians) have been so highly modified by long periods of selection for life in the sea that they bear little resemblance to their terrestrial ancestors. Marine otters, in contrast, are more recent expatriates from freshwater habitats and some species still live in both environments. Contrasts among species within the otters, and among the otters, terrestrial mammals, and the more highly adapted pinnipeds and cetaceans provide powerful insights into mammalian adaptations to life in the sea (Estes, 1989). Among the marine mammals, sea otters (Enhydra lutris, Fig. 1) provide the clearest understanding of consumer-induced effects on ecosystem function. This is due in part to opportunities provided by history and in part to the relative ease with which shallow coastal systems where sea otters live can be observed and studied. Although more difficult to study than sea otters, other otter species reveal the connectivity among the marine, freshwater, and terrestrial systems. These three qualities of the otters – their comparative biology, their role as predators, and their role as agents of ecosystem connectivity – are what make them interesting to marine mammalogy.The following account provides a broad overview of the comparative biology and ecology of the otters, with particular emphasis on those species or populations that live in the sea. Sea otters are features prominently, in part because they live exclusively in the sea whereas other otters have obligate associations with freshwater and terrestrial environments (Kenyon, 1969; Riedman and Estes, 1990).

  1. Sedimentary and mineral dust sources of dissolved iron to the world ocean

    Directory of Open Access Journals (Sweden)

    J. K. Moore


    from sinking particles; and 3 an improved sedimentary source for dissolved iron. Most scavenged iron (90% is put on sinking particles to remineralize deeper in the water column. The model-observation differences are reduced with these modifications. The improved BEC model is used to examine the relative contributions of mineral dust and marine sediments in driving dissolved-iron distributions and marine biogeochemistry. Mineral dust and sedimentary sources of iron contribute roughly equally, on average, to dissolved iron concentrations. The sedimentary source from the continental margins has a strong impact on open-ocean iron concentrations, particularly in the North Pacific. Plumes of elevated dissolved-iron concentrations develop at depth in the Southern Ocean, extending from source regions in the SW Atlantic and around New Zealand. The lower particle flux and weaker scavenging in the Southern Ocean allows the continental iron source to be advected far from sources. Both the margin sediment and mineral dust Fe sources substantially influence global-scale primary production, export production, and nitrogen fixation, with a stronger role for the dust source. Ocean biogeochemical models that do not include the sedimentary source for dissolved iron, will overestimate the impact of dust deposition variations on the marine carbon cycle. Available iron observations place some strong constraints on ocean biogeochemical models. Model results should be evaluated against both surface and subsurface Fe observations in the waters that supply dissolved iron to the euphotic zone.

  2. Marine Battlefields

    DEFF Research Database (Denmark)

    Harðardóttir, Sara

    as they are an important food source for various marine animals. For both phytoand zooplankton predation is a major cause of mortality, and strategies for protection or avoidance are important for survival. Diatoms of the genera Nitzschia and Pseudo-nitzschia are known to produce a neuro-toxin, domoic acid (DA). Despite......Phytoplankton species are photosynthetic organisms found in most aquatic habitats. In the ocean, phytoplankton are tremendously important because they produce the energy that forms the base of the marine food web. Zooplankton feed on phytoplankton and mediate the energy to higher trophic levels...

  3. Marine cloud brightening (United States)

    Latham, John; Bower, Keith; Choularton, Tom; Coe, Hugh; Connolly, Paul; Cooper, Gary; Craft, Tim; Foster, Jack; Gadian, Alan; Galbraith, Lee; Iacovides, Hector; Johnston, David; Launder, Brian; Leslie, Brian; Meyer, John; Neukermans, Armand; Ormond, Bob; Parkes, Ben; Rasch, Phillip; Rush, John; Salter, Stephen; Stevenson, Tom; Wang, Hailong; Wang, Qin; Wood, Rob


    The idea behind the marine cloud-brightening (MCB) geoengineering technique is that seeding marine stratocumulus clouds with copious quantities of roughly monodisperse sub-micrometre sea water particles might significantly enhance the cloud droplet number concentration, and thereby the cloud albedo and possibly longevity. This would produce a cooling, which general circulation model (GCM) computations suggest could—subject to satisfactory resolution of technical and scientific problems identified herein—have the capacity to balance global warming up to the carbon dioxide-doubling point. We describe herein an account of our recent research on a number of critical issues associated with MCB. This involves (i) GCM studies, which are our primary tools for evaluating globally the effectiveness of MCB, and assessing its climate impacts on rainfall amounts and distribution, and also polar sea-ice cover and thickness; (ii) high-resolution modelling of the effects of seeding on marine stratocumulus, which are required to understand the complex array of interacting processes involved in cloud brightening; (iii) microphysical modelling sensitivity studies, examining the influence of seeding amount, seed-particle salt-mass, air-mass characteristics, updraught speed and other parameters on cloud–albedo change; (iv) sea water spray-production techniques; (v) computational fluid dynamics studies of possible large-scale periodicities in Flettner rotors; and (vi) the planning of a three-stage limited-area field research experiment, with the primary objectives of technology testing and determining to what extent, if any, cloud albedo might be enhanced by seeding marine stratocumulus clouds on a spatial scale of around 100×100 km. We stress that there would be no justification for deployment of MCB unless it was clearly established that no significant adverse consequences would result. There would also need to be an international agreement firmly in favour of such action

  4. Marine Cloud Brightening

    Energy Technology Data Exchange (ETDEWEB)

    Latham, John; Bower, Keith; Choularton, Tom; Coe, H.; Connolly, P.; Cooper, Gary; Craft, Tim; Foster, Jack; Gadian, Alan; Galbraith, Lee; Iacovides, Hector; Johnston, David; Launder, Brian; Leslie, Brian; Meyer, John; Neukermans, Armand; Ormond, Bob; Parkes, Ben; Rasch, Philip J.; Rush, John; Salter, Stephen; Stevenson, Tom; Wang, Hailong; Wang, Qin; Wood, Robert


    The idea behind the marine cloud-brightening (MCB) geoengineering technique is that seeding marine stratocumulus clouds with copious quantities of roughly monodisperse sub-micrometre sea water particles might significantly enhance the cloud droplet number concentration, and thereby the cloud albedo and possibly longevity. This would produce a cooling, which general circulation model (GCM) computations suggest could - subject to satisfactory resolution of technical and scientific problems identified herein - have the capacity to balance global warming up to the carbon dioxide-doubling point. We describe herein an account of our recent research on a number of critical issues associated with MCB. This involves (i) GCM studies, which are our primary tools for evaluating globally the effectiveness of MCB, and assessing its climate impacts on rainfall amounts and distribution, and also polar sea-ice cover and thickness; (ii) high-resolution modelling of the effects of seeding on marine stratocumulus, which are required to understand the complex array of interacting processes involved in cloud brightening; (iii) microphysical modelling sensitivity studies, examining the influence of seeding amount, seedparticle salt-mass, air-mass characteristics, updraught speed and other parameters on cloud-albedo change; (iv) sea water spray-production techniques; (v) computational fluid dynamics studies of possible large-scale periodicities in Flettner rotors; and (vi) the planning of a three-stage limited-area field research experiment, with the primary objectives of technology testing and determining to what extent, if any, cloud albedo might be enhanced by seeding marine stratocumulus clouds on a spatial scale of around 100 km. We stress that there would be no justification for deployment of MCB unless it was clearly established that no significant adverse consequences would result. There would also need to be an international agreement firmly in favour of such action.

  5. Marine cloud brightening. (United States)

    Latham, John; Bower, Keith; Choularton, Tom; Coe, Hugh; Connolly, Paul; Cooper, Gary; Craft, Tim; Foster, Jack; Gadian, Alan; Galbraith, Lee; Iacovides, Hector; Johnston, David; Launder, Brian; Leslie, Brian; Meyer, John; Neukermans, Armand; Ormond, Bob; Parkes, Ben; Rasch, Phillip; Rush, John; Salter, Stephen; Stevenson, Tom; Wang, Hailong; Wang, Qin; Wood, Rob


    The idea behind the marine cloud-brightening (MCB) geoengineering technique is that seeding marine stratocumulus clouds with copious quantities of roughly monodisperse sub-micrometre sea water particles might significantly enhance the cloud droplet number concentration, and thereby the cloud albedo and possibly longevity. This would produce a cooling, which general circulation model (GCM) computations suggest could-subject to satisfactory resolution of technical and scientific problems identified herein-have the capacity to balance global warming up to the carbon dioxide-doubling point. We describe herein an account of our recent research on a number of critical issues associated with MCB. This involves (i) GCM studies, which are our primary tools for evaluating globally the effectiveness of MCB, and assessing its climate impacts on rainfall amounts and distribution, and also polar sea-ice cover and thickness; (ii) high-resolution modelling of the effects of seeding on marine stratocumulus, which are required to understand the complex array of interacting processes involved in cloud brightening; (iii) microphysical modelling sensitivity studies, examining the influence of seeding amount, seed-particle salt-mass, air-mass characteristics, updraught speed and other parameters on cloud-albedo change; (iv) sea water spray-production techniques; (v) computational fluid dynamics studies of possible large-scale periodicities in Flettner rotors; and (vi) the planning of a three-stage limited-area field research experiment, with the primary objectives of technology testing and determining to what extent, if any, cloud albedo might be enhanced by seeding marine stratocumulus clouds on a spatial scale of around 100×100 km. We stress that there would be no justification for deployment of MCB unless it was clearly established that no significant adverse consequences would result. There would also need to be an international agreement firmly in favour of such action.

  6. Mutual Dependence Between Sedimentary Organic Carbon and Infaunal Macrobenthos Resolved by Mechanistic Modeling (United States)

    Zhang, Wenyan; Wirtz, Kai


    The mutual dependence between sedimentary total organic carbon (TOC) and infaunal macrobenthos is here quantified by a mechanistic model. The model describes (i) the vertical distribution of infaunal macrobenthic biomass resulting from a trade-off between nutritional benefit (quantity and quality of TOC) and the costs of burial (respiration) and mortality, and (ii) the variable vertical distribution of TOC being in turn shaped by bioturbation of local macrobenthos. In contrast to conventional approaches, our model emphasizes variations of bioturbation both spatially and temporally depending on local food resources and macrobenthic biomass. Our implementation of the dynamic interaction between TOC and infaunal macrobenthos is able to capture a temporal benthic response to both depositional and erosional environments and provides improved estimates of the material exchange flux at the sediment-water interface. Applications to literature data for the North Sea demonstrate the robustness and accuracy of the model and its potential as an analysis tool for the status of TOC and macrobenthos in marine sediments. Results indicate that the vertical distribution of infaunal biomass is shaped by both the quantity and the quality of OC, while the community structure is determined only by the quality of OC. Bioturbation intensity may differ by 1 order of magnitude over different seasons owing to variations in the OC input, resulting in a significant modulation on the distribution of OC. Our relatively simple implementation may further improve models of early diagenesis and marine food web dynamics by mechanistically connecting the vertical distribution of both TOC and macrobenthic biomass.

  7. Coating thickness measurement

    International Nuclear Information System (INIS)


    The standard specifies measurements of the coating thickness, which make use of beta backscattering and/or x-ray fluorescence. For commonly used combinations of coating material and base material the appropriate measuring ranges and radionuclides to be used are given for continuous as well as for discontinuous measurements

  8. Recirculation System for Geothermal Energy Recovery in Sedimentary Formations: Laboratory Experiments and Numerical Simulations (United States)

    Elkhoury, J. E.; Detwiler, R. L.; Serajian, V.; Bruno, M. S.


    Geothermal energy resources are more widespread than previously thought and have the potential for providing a significant amount of sustainable clean energy worldwide. In particular, hot permeable sedimentary formations provide many advantages over traditional geothermal recovery and enhanced geothermal systems in low permeability crystalline formations. These include: (1) eliminating the need for hydraulic fracturing, (2) significant reduction in risk for induced seismicity, (3) reducing the need for surface wastewater disposal, (4) contributing to decreases in greenhouse gases, and (5) potential use for CO2 sequestration. Advances in horizontal drilling, completion, and production technology from the oil and gas industry can now be applied to unlock these geothermal resources. Here, we present experimental results from a laboratory scale circulation system and numerical simulations aimed at quantifying the heat transfer capacity of sedimentary rocks. Our experiments consist of fluid flow through a saturated and pressurized sedimentary disc of 23-cm diameter and 3.8-cm thickness heated along its circumference at a constant temperature. Injection and production ports are 7.6-cm apart in the center of the disc. We used DI de-aired water and mineral oil as working fluids and explored temperatures from 20 to 150 oC and flow rates from 2 to 30 ml/min. We performed experiments on sandstone samples (Castlegate and Kirby) with different porosity, permeability and thermal conductivity to evaluate the effect of hydraulic and thermal properties on the heat transfer capacity of sediments. The producing fluid temperature followed an exponential form with time scale transients between 15 and 45 min. Steady state outflow temperatures varied between 60% and 95% of the set boundary temperature, higher percentages were observed for lower temperatures and flow rates. We used the flow and heat transport simulator TOUGH2 to develop a numerical model of our laboratory setting. Given

  9. Marine Science

    African Journals Online (AJOL)

    Science. The journal has a new and more modern layout, published online only, and the editorial. Board was increased to include more disciplines pertaining to marine sciences. While important chal- lenges still lie ahead, we are steadily advancing our standard to increase visibility and dissemination throughout the global ...

  10. Marine Mammals. (United States)

    Meith, Nikki

    Marine mammals have not only fascinated and inspired human beings for thousands of years, but they also support a big business by providing flesh for sea-borne factories, sustaining Arctic lifestyles and traditions, and attracting tourists to ocean aquaria. While they are being harpooned, bludgeoned, shot, netted, and trained to jump through…

  11. Marine Science

    African Journals Online (AJOL)

    Mauritius Marine Conservation Society through their. Abstract. While no populations of seals are resident in the tropical Indian Ocean, vagrant animals are occasionally sighted in the region. Here we detail two new sightings of pinnipeds in the Mascarene Islands (Mauritius, Reunion and Rodri- gues) since 1996 and review ...

  12. Marine Science

    African Journals Online (AJOL)

    J O U R N A L O F. Marine Science. Coral reefs of Mauritius in a changing global climate ..... in confined aquifers, and a lesser influence in uncon- fined systems. On the ... massive cloud cover during the critical months, some. 70% bleaching ...

  13. Marine Science

    African Journals Online (AJOL)

    Copy Editor Timothy Andrew. Published ... 2007; Zhou et al., 2009) and they play an important role in the ... At both sites, zonal variation in TMPB was evident with significantly higher C-biomass closer to ... ton is considered to be an essential parameter in eco- systems ...... logical significance of toxic marine dinoflagellates.

  14. Marine Science

    African Journals Online (AJOL)

    sustainable coastal development in the region, as well as contributing to the ... between humans and the coastal and marine environment. ... exploitation for timber, fuel wood, aquaculture, urban. Abstract. Given the high dependence of coastal communities on natural resources, mangrove conservation is a challenge in.

  15. Marine Science

    African Journals Online (AJOL)

    No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means ... USA/Norway ... The last couple of years have been a time of change for the Western Indian Ocean Journal of Marine.

  16. Marine Science

    African Journals Online (AJOL)

    Chief Editor José Paula | Faculty of Sciences of University of Lisbon, Portugal. Copy Editor Timothy Andrew. Published biannually. Aims and scope: The Western Indian Ocean Journal of Marine Science provides an avenue for the wide dissem- ination of high quality research generated in the Western Indian Ocean (WIO) ...

  17. Excess europium content in Precambrian sedimentary rocks and continental evolution (United States)

    Jakes, P.; Taylor, S. R.


    It is proposed that the europium excess in Precambrian sedimentary rocks, relative to those of younger age, is derived from volcanic rocks of ancient island arcs, which were the source materials for the sediments. Precambrian sedimentary rocks and present-day volcanic rocks of island arcs have similar REE patterns, total REE abundances, and excess Eu, relative to the North American shale composite. The present upper crustal REE pattern, as exemplified by that of sediments, is depleted in Eu, relative to chondrites. This depletion is considered to be a consequence of development of a granodioritic upper crust by partial melting in the lower crust, which selectively retains europium.

  18. Sorption and migration of neptunium in porous sedimentary materials

    International Nuclear Information System (INIS)

    Tanaka, Tadao; Mukai, Masayuki; Nakayama, Shinichi


    Column migration experiments of neptunium were conducted for porous sedimentary materials: coastal sand, tuffaceous sand, ando soil, reddish soil, yellowish soil and loess, and migration behavior, sorption mechanisms and chemical formation of Np were investigated. The migration behavior of Np in each material was much different each other, due to chemical formation in solution and/or sorption mechanism of Np. Mathematical models of different concepts were applied to the experimental results to interpret the sorption mechanism and the migration behavior. It can be concluded that both of instantaneous equilibrium sorption and sorption-desorption kinetics have to be considered to model the Np migration in sedimentary materials. (author)

  19. Building a Bridge to Deep Time: Sedimentary Systems Across Timescales (United States)

    Romans, B.; Castelltort, S.; Covault, J. A.; Walsh, J. P.


    It is increasingly important to understand the complex and interdependent processes associated with sediment production, transport, and deposition at timescales relevant to civilization (annual to millennial). However, predicting the response of sedimentary systems to global environmental change across a range of timescales remains a significant challenge. For example, a significant increase in global average temperature at the Paleocene-Eocene boundary (55.8 Ma) is interpreted to have occurred over millennial timescales; however, the specific response of sedimentary systems (e.g., timing and magnitude of sediment flux variability in river systems) to that forcing is debated. Thus, using such environmental perturbations recorded in sedimentary archives as analogs for ongoing/future global change requires improved approaches to bridging across time. Additionally, the ability to bridge timescales is critical for addressing other questions about sedimentary system behavior, including signal propagation and signal versus ';noise' in the record. The geologic record provides information that can be used to develop a comprehensive understanding of process-response behavior at multiple timescales. The geomorphic ';snapshot' of present-day erosional and depositional landscapes can be examined to reconstruct the history of processes that created the observable configurations. Direct measurement and monitoring of active processes are used to constrain conceptual and numerical models and develop sedimentary system theory. But real-time observations of active Earth-surface processes are limited to the very recent, and how such processes integrate over longer timescales to transform into strata remains unknown. At longer timescales (>106 yr), the stratigraphic record is the only vestige of ancient sedimentary systems. Stratigraphic successions contain a complex record of sediment deposition and preservation, as well as the detrital material that originated in long since denuded

  20. The volcanic-sedimentary sequence of the Lousal deposit, Iberian Pyrite Belt (Portugal) (United States)

    Rosa, Carlos; Rosa, Diogo; Matos, Joao; Relvas, Jorge


    The Iberian Pyrite Belt (IPB) is a massive sulfide province that is located in the south of Portugal and Spain, and hosts more than 90 massive sulfide deposits that amount to more than 1850 million metric tonnes of sulfide ore (Tornos, 2006). The ore deposits size, vary from ~1Mt to >100Mt (e.g. Neves Corvo and Aljustrel in Portugal, and Rio Tinto and Tharsis in Spain). The ore deposits are hosted by a submarine sedimentary and volcanic, felsic dominated, succession that constitutes the Upper Devonian to Lower Carboniferous Volcanic and Sedimentary Complex (VSC). The VSC ranges in thickness from approximately 600 to 1300 m (Tornos 2006). The VSC overlies the Phyllite-Quartzite Group (PQ) (Upper Devonian, base unknown) and is overlain by the Baixo Alentejo Flysch Group (Lower to Upper Carboniferous). The Lousal massive sulfide deposit is located in the western part of the IPB and occurs mostly interbedded with black mudstone. The VSC sequence at Lousal mine consists of a mudstone and quartzite sequence (PQ Group) in the lower part of the succession, over which a thick sequence of rhyolitic lavas (>300 m) occurs. Above the rhyolitic lavas there is a thick sequence of black and grey mudstone that hosts the massive sulfide ore bodies, and a rhyolitic sill. The upper part of the VSC sequence consists of a thick mudstone interval that hosts two thick basaltic units, locally with pillows. The rhyolites have small coherent cores, locally with flow bands, that grade to surrounding massive clastic intervals, with large lateral extent. The clasts show jigsaw-fit arrangement in many places and have planar or curviplanar margins and locally are perlitic at the margin. The top contact of these units is in most locations not exposed, which makes difficult to interpret the mode of emplacement. However, the thick clastic intervals, above described, are in accordance with quenching of volcanic glass with abundant water and therefore indicate that quenching of the rhyolites was the

  1. Gestures and metaphors as indicators of conceptual understanding of sedimentary systems (United States)

    Riggs, E. M.; Herrera, J. S.


    rubric established by Lakoff (1987) and Lakoff and Johnson (1999). The results suggested that students attempted to make more iconic and metaphoric gestures when dealing with abstract concepts such as relative sea level, base level, and unconformities. Schemas that were evident in both gesture and linguistic expressions dominantly included container schemas, schemas that expressed a source-path-goal relationship, and schemas that represented linear scales of quantity, such as thickness or time. Based on the analysis of gestures that expressed these central ideas, we found that proper use of representational gestures likely indicates completeness in conceptual understanding. We concluded that students rely on image schemas to develop ideas about complex sedimentary systems. Our research also supports the hypothesis that gestures provide an independent and non-linguistic indicator of image-schemas serving as mental models that shape conceptual development. The implication is that instructors should encourage proper gesture use by students during instruction, and also that gesture and linguistic metaphor could potentially be used as tools to assess student understanding.

  2. Sedimentary environments and stratigraphy of the carbonate-silicilastic deposits of the Shirgesht Formation: implications for eustasy and local tectonism in the Kalmard Block, Central Iran

    Directory of Open Access Journals (Sweden)

    reza Mousavi-Harami


    Rahdar (Devonian Formations along the basement Kalmard Fault. In the present study, three stratigraphic sections (NW-SE transects were measured, described and sampled in the Kalmard area. In these sections, detailed considerations have been given on the lithofacies variations bed geometry and contacts, faunal content, the potential of trace fossils as tools for reconstructing depositional conditions, sedimentary textures and structures, bounding surfaces, vertical trends and stacking patterns and lateral/vertical variations in facies and thicknesses. The observed siliciclastic facies can readily be interpreted using existing shelf sedimentation and shoreline succession models (e.g. Walker and Plint 1992 . Interpretation carbonate facies have been done on the basis the microfacies analysis (200 thin-sections, sedimentary textures and structures and faunal content (Wilson et al. 1975 Flügel 2010 . In final, internal architecture, characteristics of sedimentary facies, the overall stacking pattern and nature of sequence-bounding unconformities have been investigated to evaluate the influence of regional uplift, local tectonics and eustasy on both along-strike variations in sequence architecture and genetic complexity of sequence boundaries.     Discussion, Results and Conclusion   The Lower Ordovician Shirgesht Formation in central Iran is composed of siliciclastic and carbonate rocks deposited in diverse coastal and marine shelf environments (tidal flat, lagoon, shoreface, and offshore-shelf and carbonate ramp. Relying on the facies characteristics and stratal geometries, the siliciclastic succession are divided into five facies associations, FA1 (tidal flat, FA2 (lagoon/washoverfan, FA3 (upper shoreface-foreshore, FA4 (lower to middle shoreface, and FA5 (offshore-shelf.Carbonate succession of this formation based on lithology, sedimentary characteristics and textures divided into four facies belts, FA (tidal flat, FB (lagoon,FC (shoal/barrier island, and FD

  3. Determination of Cenozoic sedimentary structures using integrated geophysical surveys: A case study in the Barkol Basin, Xinjiang, China (United States)

    Sun, Kai; Chen, Chao; Du, Jinsong; Wang, Limin; Lei, Binhua


    Thickness estimation of sedimentary basin is a complex geological problem, especially in an orogenic environment. Intense and multiple tectonic movements and climate changes result in inhomogeneity of sedimentary layers and basement configurations, which making sedimentary structure modelling difficult. In this study, integrated geophysical methods, including gravity, magnetotelluric (MT) sounding and electrical resistivity tomography (ERT), were used to estimate basement relief to understand the geological structure and evolution of the eastern Barkol Basin in China. This basin formed with the uplift of the eastern Tianshan during the Cenozoic. Gravity anomaly map revealed the framework of the entire area, and ERT as well as MT sections reflected the geoelectric features of the Cenozoic two-layer distribution. Therefore, gravity data, constrained by MT, ERT and boreholes, were utilized to estimate the spatial distribution of the Quaternary layer. The gravity effect of the Quaternary layer related to the Tertiary layer was later subtracted to obtain the residual anomaly for inversion. For the Tertiary layer, the study area was divided into several parts because of lateral difference of density contrasts. Gravity data were interpreted to determine the density contrast constrained by the MT results. The basement relief can be verified by geological investigation, including the uplift process and regional tectonic setting. The agreement between geophysical survey and prior information from geology emphasizes the importance of integrated geophysical survey as a complementary means of geological studies in this region.

  4. Global compilation of marine varve records (United States)

    Schimmelmann, Arndt; Lange, Carina B.; Schieber, Juergen; Francus, Pierre; Ojala, Antti E. K.; Zolitschka, Bernd


    Marine varves contain highly resolved records of geochemical and other paleoceanographic and paleoenvironmental proxies with annual to seasonal resolution. We present a global compilation of marine varved sedimentary records throughout the Holocene and Quaternary covering more than 50 sites worldwide. Marine varve deposition and preservation typically depend on environmental and sedimentological conditions, such as a sufficiently high sedimentation rate, severe depletion of dissolved oxygen in bottom water to exclude bioturbation by macrobenthos, and a seasonally varying sedimentary input to yield a recognizable rhythmic varve pattern. Additional oceanographic factors may include the strength and depth range of the Oxygen Minimum Zone (OMZ) and regional anthropogenic eutrophication. Modern to Quaternary marine varves are not only found in those parts of the open ocean that comply with these conditions, but also in fjords, embayments and estuaries with thermohaline density stratification, and nearshore 'marine lakes' with strong hydrologic connections to ocean water. Marine varves have also been postulated in pre-Quaternary rocks. In the case of non-evaporitic laminations in fine-grained ancient marine rocks, such as banded iron formations and black shales, laminations may not be varves but instead may have multiple alternative origins such as event beds or formation via bottom currents that transported and sorted silt-sized particles, clay floccules, and organic-mineral aggregates in the form of migrating bedload ripples. Modern marine ecosystems on continental shelves and slopes, in coastal zones and in estuaries are susceptible to stress by anthropogenic pressures, for example in the form of eutrophication, enhanced OMZs, and expanding ranges of oxygen-depletion in bottom waters. Sensitive laminated sites may play the important role of a 'canary in the coal mine' where monitoring the character and geographical extent of laminations/varves serves as a diagnostic

  5. Coating thickness measuring device

    International Nuclear Information System (INIS)

    Joffe, B.B.; Sawyer, B.E.; Spongr, J.J.


    A device especially adapted for measuring the thickness of coatings on small, complexly-shaped parts, such as, for example, electronic connectors, electronic contacts, or the like. The device includes a source of beta radiation and a radiation detector whereby backscatter of the radiation from the coated part can be detected and the thickness of the coating ascertained. The radiation source and detector are positioned in overlying relationship to the coated part and a microscope is provided to accurately position the device with respect to the part. Means are provided to control the rate of descent of the radiation source and radiation detector from its suspended position to its operating position and the resulting impact it makes with the coated part to thereby promote uniformity of readings from operator to operator, and also to avoid excessive impact with the part, thereby improving accuracy of measurement and eliminating damage to the parts

  6. Thick melanoma in Tuscany. (United States)

    Chiarugi, Alessandra; Nardini, Paolo; Borgognoni, Lorenzo; Brandani, Paola; Gerlini, Gianni; Rubegni, Pietro; Lamberti, Arianna; Salvini, Camilla; Lo Scocco, Giovanni; Cecchi, Roberto; Sirna, Riccardo; Lorenzi, Stefano; Gattai, Riccardo; Battistini, Silvio; Crocetti, Emanuele


    The epidemiologic trends of cutaneous melanoma are similar in several countries with a Western-type life style, where there is a progressive increasing incidence and a low but not decreasing mor- tality, or somewhere an increase too, especially in the older age groups. Also in Tuscany there is a steady rise in incidence with prevalence of in situ and invasive thin melanomas, with also an increase of thick melanomas. It is necessary to reduce the frequency of thick melanomas to reduce specific mortality. The objective of the current survey has been to compare, in the Tuscany population, by a case- case study, thin and thick melanoma cases, trying to find out those personal and tumour characteristics which may help to customize preventive interventions. RESULTS The results confirmed the age and the lower edu- cation level are associated with a later detection. The habit to perform skin self-examination is resulted protec- tive forward thick melanoma and also the diagnosis by a doctor. The elements emerging from the survey allow to hypothesize a group of subjects resulting at higher risk for a late diagnosis, aged over 50 and carrier of a fewer constitutional and environmental risk factors: few total and few atypical nevi, and lower sun exposure and burning. It is assumable that a part of people did not be reached from messages of prevention because does not recognize oneself in the categories of people at risk for skin cancers described in educational cam- paigns. If we want to obtain better results on diagnosis of skin melanoma we have to think a new strategy. At least to think over the educational messages discriminating people more at risk of incidence of melanoma from people more at risk to die from melanoma, and to renewed active involvement of the Gen- eral Practitioners .

  7. Thick brane solutions

    International Nuclear Information System (INIS)

    Dzhunushaliev, Vladimir; Minamitsuji, Masato; Folomeev, Vladimir


    This paper gives a comprehensive review on thick brane solutions and related topics. Such models have attracted much attention from many aspects since the birth of the brane world scenario. In many works, it has been usually assumed that a brane is an infinitely thin object; however, in more general situations, one can no longer assume this. It is also widely considered that more fundamental theories such as string theory would have a minimal length scale. Many multidimensional field theories coupled to gravitation have exact solutions of gravitating topological defects, which can represent our brane world. The inclusion of brane thickness can realize a variety of possible brane world models. Given our understanding, the known solutions can be classified into topologically non-trivial solutions and trivial ones. The former class contains solutions of a single scalar (domain walls), multi-scalar, gauge-Higgs (vortices), Weyl gravity and so on. As an example of the latter class, we consider solutions of two interacting scalar fields. Approaches to obtain cosmological equations in the thick brane world are reviewed. Solutions with spatially extended branes (S-branes) and those with an extra time-like direction are also discussed.

  8. Microbial mat-induced sedimentary structures in siliciclastic sediments

    Indian Academy of Sciences (India)

    This paper addresses macroscopic signatures of microbial mat-related structures within the. 1.6Ga-old Chorhat Sandstone ... Sandstone differentiated in facies superposed one over the other and their respective structural assemblages (b). may be ..... within the classification of primary sedimentary struc- tures; J. Sed. Res.

  9. Sedimentary characteristics of samples collected from some submarine canyons

    NARCIS (Netherlands)

    Bouma, Arnold H.

    Oriented rectangular cores of 20.3 × 30.5 cm and 45.7 cm high have been collected in a number of submarine canyons off southern California (U.S.A.) and off the southern tip of Baja California (Mexico) for a detailed study of their sedimentary structures. By applying several methods, mainly X-ray

  10. An Overview of the Soutpansberg Sedimentary and Volcanic Rocks

    Directory of Open Access Journals (Sweden)

    J.W. Bristow


    Full Text Available Volcanic and sedimentary rocks occupy a faulted graben within the previously uplifted and eroded high-grade gneiss terrain of the Limpopo Mobile Belt. The rocks comprise the Soutpansberg Group and represent an important sequence of Proterozoic rocks. Their general geology and volcanology is summarised in this paper.

  11. Epigenetic alteration of sedimentary rocks at hydrogenic uranium deposit

    International Nuclear Information System (INIS)

    Ding Wanlie; Shen Kefeng


    The author introduces the concept, the recognition criteria, the genesis and classification of the epigenetic alteration of sedimentary rocks in brief, and expounds the mineral-geochemical indications and characteristics of oxidation and reduction alterations in different geochemical zones in detail, and proposes the two models of ore-controlling zonation of epigenetic alteration. The authors finally introduce research methods of epigenetic alteration

  12. Amino acids in the sedimentary humic and fulvic acids

    Digital Repository Service at National Institute of Oceanography (India)

    Sardessai, S.

    acids in the coastal Arabian Sea sediments: whereas amino acids content of fulvic acids was lower than that of humic acids in the coastal sediments of Bay of Bengal. Slope sedimentary humic acids were relatively enriched in amino acids as compared...


    Directory of Open Access Journals (Sweden)

    I. A. Larionov


    Full Text Available The results of investigations of the deformation process in the near surface sedimentary rocks, which has been carried out in a seismically active region of Kamchatka peninsular since 2007,are presented. The peculiarity of the experiments on the registration of geodeformations is the application of a laser deformograph-interferometer constructed according to the Michelson interferometer scheme.

  14. Plutonium mobilization from sedimentary sources to solution in the marine environment

    International Nuclear Information System (INIS)

    Noshkin, V.E.; Wong, K.M.


    Inventories of plutonium radionuclides greatly in excess of global fallout levels persists in the benthic environments of Bikini and Eniwetok Atolls. It now appears that the atolls have reached a chemical steadystate condition with respect to the partitioning of 239+240 Pu between solution and solid phases of the environment. The mobilized 239+240 Pu has solute-like characteristics, passes rapidly and readily through dialysis membranes, has adsorption characteristics similar to those of fallout plutonium in the open ocean, and exists in solution primarily as some oxidized +5 or +6 chemical species. Water-column profiles of 239+240 Pu taken outside the atolls show a plutonium excess in the deep water mass. This remobilized 239+240 Pu possibly originates from the contaminated sediments previously deposited on the outer slopes of the atolls and surrounding basins

  15. Sc, Y, La-Lu. Rare earth elements. Vol. A 6a. Y, La, and the lanthanoids. Geochemistry: Sedimentary cycle. Metamorphic cycle. 8. rev. ed

    Energy Technology Data Exchange (ETDEWEB)

    Ditz, R; Sarbas, B; Schubert, P; Toepper, W


    The present volume 'Rare Earth Elements' A 6a describes origin, mode of occurrence, and behavior of Y and RE elements in the sedimentary and metamorphic cycles, and completes the series of volumes describing cosmo- and geochemistry of these elements. In the chapter 'Sedimentary Cycle', the behavior of Y and RE during the weathering process is first outlined under both marine and terrestrial conditions, including a short compilation for migration and precipitation in surficial weathering and oxidation zones. The main part of the chapter treats, in addition to the mode of occurrence, predominantly the distribution of Y and RE in the different types of sedimentary rocks in relation to genetic processes (comprising physical and/or spatial factors such as geological age of the deposition). A concluding part gives a description of mobilization, migration, and precipitation of Y and RE during the diagenetic transformation of sediments, especially in relation to the various types of ferromanganese concretions. In the chapter 'Metamorphic Cycle', the first, extensive part gives examples of mode of occurrence and behavior of Y and RE during both the contact-metamorphic and prograde and retrograde regional-metamorphic processes affecting sedimentary and igeneous source rocks. The second part briefly describes behaviour of Y and RE during ultrametamorphism of metamorphic rocks, and during metamorphic processes in connection with special types of geologic events (as, e.g., subduction of crustal material into the earth's mantle and impact of extraterrestrial material). (orig.) With 4 figs.

  16. The sedimentary facies characteristics and lithofacies palaeogeography during Middle-Late Cambrian, Sichuan Basin and adjacent area

    Directory of Open Access Journals (Sweden)

    Feifan Lu


    Full Text Available Combined with the regional strata filling characteristics of Middle-Upper Cambrian, the present paper conducts a systematic research on sedimentary facies in the basin and its peripheral area by utilizing 164 field outcrops and drilling and coring data. Further, the method of “multi-factor comprehensive synthesis based on single-factor analysis” was employed to investigate the sedimentary facies and palaeogeography of the study area and establish the sedimentary facies model. Stratigraphic reveals that the study area represents the pattern of thin-northwest and thick-southeast by stretching northeast-southwest. Within the present basin, the pattern of “one thin and two thick” predominates, while outside the basin “four thin and three thick” filling feature was found. Sedimentary facies shows that the study area was featured by rimmed carbonate platform. Specifically, carbonate platform, slope and northeastern corner Qinling paleooceanic Basin and southeastern corner Jiangnan Bain was identified from the west to the east. The carbonate platform contains restricted platform, evaporation-restricted platform, semi-restricted platform and the platform margin. Single factor analysis and lithofacies palaeogeographic characteristics manifests that during Middle-Late Cambrian, the western Old land evolved into peneplain stage, and that the eastern and southwestern sub-sags remained connected to the open-sea to some extent. At the time, the shllow seawater circulation was relatively restricted, while the ancient seabed tended to be flat and evaporation characteristics significantly diminished. Secondary sea-level fluctuation intensively influenced the development of scaled grain beach. It is suggested that tide marginal beach, intraplatform shoal subfacies zone, along with Shiqian-SangZhi in southeast and Zhenba-Xinshan in northeast platform-margin beach subfacies zone to be preferable targets for the favorable reservoir facies zone and

  17. Stratigraphy and structural development of the southwest Isla Tiburón marine basin: Implications for latest Miocene tectonic opening and flooding of the northern Gulf of California (United States)

    Bennett, Scott E. K.; Oskin, Michael; Dorsey, Rebecca; Iriondo, Alexander; Kunk, Michael J.


    Accurate information on the timing of earliest marine incursion into the Gulf of California (northwestern México) is critical for paleogeographic models and for understanding the spatial and temporal evolution of strain accommodation across the obliquely divergent Pacific-North America plate boundary. Marine strata exposed on southwest Isla Tiburón (SWIT) have been cited as evidence for a middle Miocene marine incursion into the Gulf of California at least 7 m.y. prior to plate boundary localization ca. 6 Ma. A middle Miocene interpretation for SWIT marine deposits has played a large role in subsequent interpretations of regional tectonics and rift evolution, the ages of marine basins containing similar fossil assemblages along ~1300 km of the plate boundary, and the timing of marine incursion into the Gulf of California. We report new detailed geologic mapping and geochronologic data from the SWIT basin, an elongate sedimentary basin associated with deformation along the dextral-oblique La Cruz fault. We integrate these results with previously published biostratigraphic and geochronologic data to bracket the age of marine deposits in the SWIT basin and show that they have a total maximum thickness of ~300 m. The 6.44 ± 0.05 Ma (Ar/Ar) tuff of Hast Pitzcal is an ash-flow tuff stratigraphically below the oldest marine strata, and the 6.01 ± 0.20 Ma (U/Pb) tuff of Oyster Amphitheater, also an ash-flow tuff, is interbedded with marine conglomerate near the base of the marine section. A dike-fed rhyodacite lava flow that caps all marine strata yields ages of 3.51 ± 0.05 Ma (Ar/Ar) and 4.13 ± 0.09 Ma (U/Pb) from the base of the flow, consistent with previously reported ages of 4.16 ± 1.81 Ma (K-Ar) from the flow top and (K-Ar) 3.7 ± 0.9 Ma from the feeder dike. Our new results confirm a latest Miocene to early Pliocene age for the SWIT marine basin, consistent with previously documented latest Miocene to early Pliocene (ca. 6.2-4.3 Ma) planktonic and benthic

  18. On the possibility of occurrence of uranium mineralization in some sedimentary formations of the Sudety Mts

    International Nuclear Information System (INIS)

    Miecznik, J.B.; Strzelecki, R.


    The Sudety Mts represent a part of the Bohemian Massif which is one of the richest uranium-bearing regions in Europe. The possibilities of occurrence of uranium in most interesting sedimentary formations of the Sudety Mts are analysed. The sedimentary formations which originated during the platform stage of evolution of these Mountains, after formation of Variscan endogenic mineralization, were recognized as perspective here. Sandstone-type uranium deposits and uraniferous black shales were assumed to be the most important in that area. Sandstone-type uranium deposits are related to continental uppermost Carboniferous (Glinik Beds - Westphalian C-D and, possibly, lowermost Stephanian) of the Central Sudety (Intra-Sudetic Depression). They closely resemble uranium deposits known from continental clastic Permo-Carboniferous sections of several parts of Europe. Westphalian D and Stephanian rocks developed in similar lithofacies in the western Sudety Mts (North-Sudetic Depression) may be also characterized by increased content of uranium. Attention is also paid to the possibilities of occurrence of uranium mineralization in shallow-marine sandstones and continental deposits of the Cenomanian as uranium deposits are known from similarly developed Cenomanian in the North Czech Upper Cretaceous Table area, i.e. in the direct neighbourhood of the Sudety Mts. Traces of uranium mineralization were found in black shales of the Lower Silurian section in the Kaczawa Mts (western Sudety Mts) and Bardo Mts (Central Sudety). The recorded concentrations (up to several hundred ppm) may be compared with uranium occurrences known from Lower Silurian sections of the Barrandian (CSSR) and Thuringia (GDR). (author)

  19. The stratigraphic record and processes of turbidity current transformation across deep-marine lobes

    NARCIS (Netherlands)

    Kane, Ian A.; Ponten, Anna; Vangdal, Brita; Eggenhuisen, Joris|info:eu-repo/dai/nl/322850274; Hodgson, David M.; Spychala, Yvonne T.|info:eu-repo/dai/nl/411435019

    Sedimentary facies in the distal parts of deep-marine lobes can diverge significantly from those predicted by classical turbidite models, and sedimentological processes in these environments are poorly understood. This gap may be bridged using outcrop studies and theoretical models. In the

  20. Nearshore sediment thickness, Fire Island, New York (United States)

    Locker, Stanley D.; Miselis, Jennifer L.; Buster, Noreen A.; Hapke, Cheryl J.; Wadman, Heidi M.; McNinch, Jesse E.; Forde, Arnell S.; Stalk, Chelsea A.


    Investigations of coastal change at Fire Island, New York (N.Y.), sought to characterize sediment budgets and determine geologic framework controls on coastal processes. Nearshore sediment thickness is critical for assessing coastal system sediment availability, but it is largely unquantified due to the difficulty of conducting geological or geophysical surveys across the nearshore. This study used an amphibious vessel to acquire chirp subbottom profiles. These profiles were used to characterize nearshore geology and provide an assessment of nearshore sediment volume. Two resulting sediment-thickness maps are provided: total Holocene sediment thickness and the thickness of the active shoreface. The Holocene sediment section represents deposition above the maximum flooding surface that is related to the most recent marine transgression. The active shoreface section is the uppermost Holocene sediment, which is interpreted to represent the portion of the shoreface thought to contribute to present and future coastal behavior. The sediment distribution patterns correspond to previously defined zones of erosion, accretion, and stability along the island, demonstrating the importance of sediment availability in the coastal response to storms and seasonal variability. The eastern zone has a thin nearshore sediment thickness, except for an ebb-tidal deposit at the wilderness breach caused by Hurricane Sandy. Thicker sediment is found along a central zone that includes shoreface-attached sand ridges, which is consistent with a stable or accretional coastline in this area. The thickest overall Holocene section is found in the western zone of the study, where a thicker lower section of Holocene sediment appears related to the westward migration of Fire Island Inlet over several hundred years.

  1. The integration of gravity, magnetic and seismic data in delineating the sedimentary basins of northern Sinai and deducing their structural controls (United States)

    Selim, El Sayed Ibrahim


    The Sinai Peninsula is a part of the Sinai sub-plate that located between the southeast Nubian-Arabian shield and the southeastern Mediterranean northward. The main objectives of this investigation are to deduce the main sedimentary basin and its subdivisions, identify the subsurface structural framework that affects the study area and determine the thickness of sedimentary cover of the basement surface. The total intensity magnetic map, Bouguer gravity map and seismic data were used to achieve the study aims. Structural interpretation of the gravity and magnetic data were done by applying advanced processing techniques. These techniques include; Reduce to the pole (RTP), Power spectrum, Tile derivative and Analytical Signal techniques were applied on gravity and magnetic data. Two dimensional gravity and magnetic modeling and interpretation of seismic sections were done to determine the thickness of sedimentary cover of the study area. The integration of our interpretation suggests that, the northern Sinai area consists of elongated troughs that contain many high structural trends. Four major structural trends have been identified, that, reflecting the influence of district regional tectonic movements. These trends are: (1) NE-SW trend; (2) NNW-SSE trend; (3) ENE-WSW trend and (4) WNW-ESE trend. There are also many minor trends, E-W, NW-SE and N-S structural trends. The main sedimentary basin of North Sinai is divided into four sub-basins; (1) Northern Maghara; (2) Northeastern Sinai; (3) Northwestern Sinai and (4) Central Sinai basin. The sedimentary cover ranges between 2 km and 7 km in the northern part of the study area.

  2. Trace metals partitioning among different sedimentary mineral phases and the deposit-feeding polychaete Armandia brevis

    International Nuclear Information System (INIS)

    Díaz-de-Alba, Margarita; Huerta-Diaz, Miguel Angel; Delgadillo-Hinojosa, Francisco; Hare, Landis; Galindo-Riaño, M. Dolores; Siqueiros-Valencia, Arturo


    Trace metals (Cd, Co, Cu, Fe, Mn, Ni, Pb, Zn) were determined in two operationally defined fractions (HCl and pyrite) in sediments from Ensenada and El Sauzal harbors (Mexico). The HCl fraction had significantly higher metal concentrations relative to the pyrite fraction in both harbors, underlining the weak tendency of most trace metals to associate with pyrite. Exceptionally, Cu was highly pyritized, with degrees of trace metal pyritization (DTMP) > 80% in both harbors. Dissolved Fe flux measurements combined with solid phase Fe sulfide data indicated that 98 mt of Fe are precipitated as iron sulfides every year in Ensenada Harbor. These Fe sulfides (and associated trace metals) will remain preserved in the sediments, unless they are perturbed by dredging or sediment resuspension. Calculations indicate that dredging activities could export to the open ocean 0.20 ± 0.13 to (0.30 ± 0.56) × 10"3 mt of Cd and Cu, respectively, creating a potential threat to marine benthic organisms. Degrees of pyritization (DOP) values in Ensenada and El Sauzal harbors were relatively low (< 25%) while degrees of sulfidization (DOS) were high (~ 50%) because of the contribution of acid volatile sulfide. DOP values correlated with DTMP values (p ≤ 0.001), indicating that metals are gradually incorporated into pyrite as this mineral is formed. Significant correlations were also found between DTMP values and − log(K_s_p_(_M_e_S_)/K_s_p_(_p_y_r_)) for both harbors, indicating that incorporation of trace metals into the pyrite phase is a function of the solubility product of the corresponding metal sulfide. The order in which elements were pyritized in both harbors was Zn ≈ Mn < Fe < Cd ≈ Pb < Ni ≈ Co < < Cu. Lastly, a strong correlation (r"2 = 0.87, p < 0.01) was found between average reactive trace metal concentrations and metal concentrations measured in Armandia brevis (a deposit-feeding Opheliid polychaete), suggesting that these labile sedimentary metals are

  3. Sedimentary changes on the Southeastern Brazilian upper slope during the last 35,000 years

    Directory of Open Access Journals (Sweden)

    Michel M. Mahiques


    Full Text Available A first evaluation of the sedimentary changes, including accumulation of inorganic and organic carbon on the upper slope off Southeastern Brazil under different climatic conditions, based on the analysis of a sedimentary core, is here presented. Results indicate that sedimentation rate as well sedimentary characteristics, including the nature of the organic carbon deposited during the LGM (Last Glacial Maximum, were different from the present deposition, indicating higher primary productivity during the LGM, to be accounted for by the higher values of marine organic carbon. Nevertheless, the higher values of Accumulation Rate of calcium carbonate and organic carbon can be credited to the higher values of the sedimentation rates. Conditions prevailing during Isotope Stage 3 may be considered intermediate as between the LGM and the present day. The conditions for a higher primary productivity associated with the deposition of finer terrigenous sediments may be explained as a response to the off shoreward displacement of the main flow of the Brazil Current.Este trabalho apresenta uma primeira avaliação das mudanças sedimentares, incluindo a acumulação de carbono orgânico e inorgânico, no talude continental superior do Brasil, sob diferentes condições climáticas, baseadas em análises de um testemunho. Os resultados indicam que a taxa de sedimentação, assim como as características sedimentares, incluindo a natureza do carbono orgânico depositado durante o UMG (Último Máximo Glacial, foram diferentes dos processos deposicionais atuais, indicando maior produtividade primária durante o UMG, como determinado pelos maiores valores de carbono orgânico marinho. Entretanto, os maiores valores de Taxa de Acumulação de carbonato de cálcio e carbono orgânico podem ser creditados aos valores mais altos de taxas de sedimentação. As condições prevalentes durante o Estágio Isotópico 3 podem ser consideradas intermediárias entre o UMG e

  4. Trace metals partitioning among different sedimentary mineral phases and the deposit-feeding polychaete Armandia brevis

    Energy Technology Data Exchange (ETDEWEB)

    Díaz-de-Alba, Margarita [Department of Analytical Chemistry, Institute of Biomolecules (INBIO), Faculty of Sciences, CEI-MAR, University of Cadiz, Campus Rio S. Pedro, E-11510, Puerto Real, Cadiz (Spain); Huerta-Diaz, Miguel Angel, E-mail: [Instituto de Investigaciones Oceanológicas, Universidad Autónoma de Baja California, Campus Ensenada, Km. 103 Carr. Tijuana-Ensenada, Ensenada 22800, Baja California (Mexico); Delgadillo-Hinojosa, Francisco [Instituto de Investigaciones Oceanológicas, Universidad Autónoma de Baja California, Campus Ensenada, Km. 103 Carr. Tijuana-Ensenada, Ensenada 22800, Baja California (Mexico); Hare, Landis [Centre Eau Terre Environnement, 490, rue de la Couronne, Québec, Québec G1K 9A9 (Canada); Galindo-Riaño, M. Dolores [Department of Analytical Chemistry, Institute of Biomolecules (INBIO), Faculty of Sciences, CEI-MAR, University of Cadiz, Campus Rio S. Pedro, E-11510, Puerto Real, Cadiz (Spain); Siqueiros-Valencia, Arturo [Instituto de Investigaciones Oceanológicas, Universidad Autónoma de Baja California, Campus Ensenada, Km. 103 Carr. Tijuana-Ensenada, Ensenada 22800, Baja California (Mexico)


    Trace metals (Cd, Co, Cu, Fe, Mn, Ni, Pb, Zn) were determined in two operationally defined fractions (HCl and pyrite) in sediments from Ensenada and El Sauzal harbors (Mexico). The HCl fraction had significantly higher metal concentrations relative to the pyrite fraction in both harbors, underlining the weak tendency of most trace metals to associate with pyrite. Exceptionally, Cu was highly pyritized, with degrees of trace metal pyritization (DTMP) > 80% in both harbors. Dissolved Fe flux measurements combined with solid phase Fe sulfide data indicated that 98 mt of Fe are precipitated as iron sulfides every year in Ensenada Harbor. These Fe sulfides (and associated trace metals) will remain preserved in the sediments, unless they are perturbed by dredging or sediment resuspension. Calculations indicate that dredging activities could export to the open ocean 0.20 ± 0.13 to (0.30 ± 0.56) × 10{sup 3} mt of Cd and Cu, respectively, creating a potential threat to marine benthic organisms. Degrees of pyritization (DOP) values in Ensenada and El Sauzal harbors were relatively low (< 25%) while degrees of sulfidization (DOS) were high (~ 50%) because of the contribution of acid volatile sulfide. DOP values correlated with DTMP values (p ≤ 0.001), indicating that metals are gradually incorporated into pyrite as this mineral is formed. Significant correlations were also found between DTMP values and − log(K{sub sp(MeS)}/K{sub sp(pyr)}) for both harbors, indicating that incorporation of trace metals into the pyrite phase is a function of the solubility product of the corresponding metal sulfide. The order in which elements were pyritized in both harbors was Zn ≈ Mn < Fe < Cd ≈ Pb < Ni ≈ Co < < Cu. Lastly, a strong correlation (r{sup 2} = 0.87, p < 0.01) was found between average reactive trace metal concentrations and metal concentrations measured in Armandia brevis (a deposit-feeding Opheliid polychaete), suggesting that these labile sedimentary metals are

  5. Relationships between environment and characteristics of marine Fe-Mn deposits in the Romanche trench

    International Nuclear Information System (INIS)

    Bonte, Philippe.


    The geological characteristics and Fe-Mn deposits from the North wall of the Romanche trench (Atlantic ocean) were studied in order to investigate possible relationships of these deposits with hydrothermalism. The results indicate diffuse hydrothermal activity in all of the rock samples which may explain the notable mineralogical associations observed, such as talc-dolomite-hematite-serpentine. All rock outcrops were covered with Fe-Mn deposits, but no such deposits were noted on sedimentary platforms. The variations in average chemical composition are very low among the different deposits. Hence, the phenomenon which produces these deposits is not localized. From this study, we conclude that marine Fe-Mn deposits result from the continuous supply of terrigenous iron and discontinuous supply of manganese, probably hydrothermal in origin. Detrital particles and numerous chemical elements are scavenged during the accretion process itself, whereas some trace elements, among the least soluble (Co, Ti, Th, Ce), are adsorbed on these deposits, independently of the accretion. This explains the inverse variation of the content of these elements versus deposit thickness [fr

  6. Full reflector thickness and isolation thickness on neutron transport

    International Nuclear Information System (INIS)

    Sakai, Tomohiro; Naito, Yoshitaka; Komuro, Yuichi.


    A method to determine ''full reflector thickness'' and ''isolation thickness'', which is utilized for criticality safety evaluation on nuclear fuel facilities, was proposed in this paper. Firstly, a calculation was tryed to obtain the two kinds of thicknesses from the result of criticality calculations for a specific case. Then, two simple equations which calculates the two kinds of thicknesses were made from the relation between reflector (or isolator) thickness and k eff , and one-group diffusion theory. Finally, we proposed a new method to determine the thicknesses. From the method we proposed, ''full reflector thickness'' and ''isolation thickness'' can be obtain using the equations and migration length of the reflector (or isolator) and infinite and effective multiplication factor of the fuel. (author)

  7. Application of /sup 14/C-dating to sedimentary geology and climatology: Sea-level and climate change during the Holocene

    Energy Technology Data Exchange (ETDEWEB)

    Nakai, Nobuyuki; Ohishi, Shyoji; Kuriyama, Toyoko; Nakamura, Toshio


    AMS /sup 14/C dating of small sized fossil shells, wood chips and sedimentary humic matter has been applied to the investigation of paleoclimatic and sea-level changes in the Holocene, using three estuarine and brackish lake sediment cores, drilled in Kawasaki city and Lake Hamanako, Japan. Precise and detailed ages at differing depths clarified large transitions of Holocene sedimentation rates, of two orders of magnitude. The vertical variation in delta/sup 13/C and C/N results for sedimentary organic matter, combined with AMS /sup 14/C ages, established continous climatic and sea-level fluctuation patterns through time and indicated the existence of neoglaciation coincident with the marine regression at 7500 to 7000 yr BP.

  8. Elemental Characteristics of Australian Sedimentary Opals and their Implications for Opal Formation and Gemstone Fingerprinting (United States)

    Dutkiewicz, A.; Landgrebe, T. C.; Rey, P. F.


    Opal consists of amorphous SiO2.nH2O comprising a network of silica spheres, which in precious opal are of similar size and form an ordered network allowing light to diffract into an array of colors. Common opal, which is often associated with precious opal, lacks this play of color as it is composed of silica spheres of variable sizes. Australia supplies over 95% of the world's precious opal. The opal is almost exclusively located within Cretaceous sedimentary rocks of the Great Artesian Basin, which experienced a major phase of uplift in the Late Cretaceous with subsequent erosion removing a package of sedimentary rock up to 3 km in thickness. Intense weathering resulted in extensive silicification at relatively shallow levels within the Tertiary regolith. However, despite a billion dollar industry and a well-constrained geological history of the basin, the formation of sedimentary opal and its uniqueness to the Australian continent are still very poorly understood. In this study we have used laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) on precious and common opal from key opal mining areas in order to constrain the possible sources of silica fluids involved in opal genesis and to assess whether any major or trace elements could be used to determine the provenance of opal with respect to a particular mining area. A total of 123 spots, each comprising 59 elements, including rare earth elements were analyzed. Globally, volcanic and sedimentary opals can be distinguished on the basis of Ba and Ca concentrations. Although the opals from the Great Artesian Basin are all sedimentary, some show Ba concentrations consistent with volcanic opals suggesting that silica fluids from which they formed were derived from a volcanic province. The most likely source is the Cretaceous volcanic-plutonic province of central Queensland, which supplied vast amounts of volcanogenic material into the Great Artesian Basin. The weathering of feldspars from the

  9. Active Marine Station Metadata (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Active Marine Station Metadata is a daily metadata report for active marine bouy and C-MAN (Coastal Marine Automated Network) platforms from the National Data...

  10. Geothermal reservoir simulation of hot sedimentary aquifer system using FEFLOW® (United States)

    Nur Hidayat, Hardi; Gala Permana, Maximillian


    The study presents the simulation of hot sedimentary aquifer for geothermal utilization. Hot sedimentary aquifer (HSA) is a conduction-dominated hydrothermal play type utilizing deep aquifer, which is heated by near normal heat flow. One of the examples of HSA is Bavarian Molasse Basin in South Germany. This system typically uses doublet wells: an injection and production well. The simulation was run for 3650 days of simulation time. The technical feasibility and performance are analysed in regards to the extracted energy from this concept. Several parameters are compared to determine the model performance. Parameters such as reservoir characteristics, temperature information and well information are defined. Several assumptions are also defined to simplify the simulation process. The main results of the simulation are heat period budget or total extracted heat energy, and heat rate budget or heat production rate. Qualitative approaches for sensitivity analysis are conducted by using five parameters in which assigned lower and higher value scenarios.

  11. Marine Sciences

    International Nuclear Information System (INIS)



    PNL research in the marine sciences is focused on establishing a basic understanding of the mechanisms of stress and tolerance in marine organisms exposed to contaminants. Several environmental stressors had been investigated in earlier energy-related research. In a landmark study, for example, PNL had established that the severity of fish disease caused by the common infectious agent, Flexobacter columnaris, was seriously aggravated by thermal enhancement and certain ecological factors. Subsequent studies demonstrated that the primary immune response in fish, challenged by columnaris, could be permanently suppressed by comparatively low tritium exposures. The research has suggested that a potential exists for a significant biological impact when an aquatic stressor is added to an ambient background of other stressors, which may include heat, heavy metal ions, radiation or infectious microorganisms. More recently, PNL investigators have shown that in response to heavy metal contaminants, animals synthesize specific proteins (metallothioneins), which bind and sequester metals in the animals, thus decreasing metal mobility and effects. Companion studies with host-specific intracellular pathogens are being used to investigate the effects of heavy metals on the synthesis of immune proteins, which mitigate disease processes. The results of these studies aid in predicting the ecological effects of energy-related contaminants on valued fin and shellfish species

  12. Sedimentary Petrology: from Sorby to the globalization of Sedimentary Geology; La Petrologia Sedimentaria: desde Sorby a la globalizacion de la Geologia Sedimentaria

    Energy Technology Data Exchange (ETDEWEB)

    Alonso-Zarza, A M


    We describe here the most important milestones and contributions to Sedimentary Petrology compared to other geological disciplines. We define the main aim of our study and the scientific and economic interests involved in Sedimentary Petrology. The body of the paper focuses upon the historical development of this discipline from Henry Sorby's initial work until the present day. The major milestones in its history include: 1) initial descriptive works; 2) experimental studies; 3) the establishment of the different classifications of sedimentary rocks; 4) studies into facies and sedimentary environments; 5) advances in the study of diagenetic processes and their role in hydrocarbon prospection; and 6) the development of Sedimentary Geochemistry. Relationships and coincidences with Sedimentology are discussed. We go on to look at the advances that have taken place over the last 30 years, in which the study of sedimentary rocks is necessarily included in the wider field of Sedimentary Geology as a logical result of the proposal of global models of a changing Earth in which Sedimentary Geology plays a significant part. Finally we mention the notable contributions of Spanish sedimentary petrologists to this whole field of science. (Author) 120 refs.

  13. Sedimentary Petrology: from Sorby to the globalization of Sedimentary Geology; La Petrologia Sedimentaria: desde Sorby a la globalizacion de la Geologia Sedimentaria

    Energy Technology Data Exchange (ETDEWEB)

    Alonso-Zarza, A. M.


    We describe here the most important milestones and contributions to Sedimentary Petrology compared to other geological disciplines. We define the main aim of our study and the scientific and economic interests involved in Sedimentary Petrology. The body of the paper focuses upon the historical development of this discipline from Henry Sorby's initial work until the present day. The major milestones in its history include: 1) initial descriptive works; 2) experimental studies; 3) the establishment of the different classifications of sedimentary rocks; 4) studies into facies and sedimentary environments; 5) advances in the study of diagenetic processes and their role in hydrocarbon prospection; and 6) the development of Sedimentary Geochemistry. Relationships and coincidences with Sedimentology are discussed. We go on to look at the advances that have taken place over the last 30 years, in which the study of sedimentary rocks is necessarily included in the wider field of Sedimentary Geology as a logical result of the proposal of global models of a changing Earth in which Sedimentary Geology plays a significant part. Finally we mention the notable contributions of Spanish sedimentary petrologists to this whole field of science. (Author) 120 refs.

  14. Euphotic zone bacterioplankton sources major sedimentary bacteriohopanepolyols in the Holocene Black Sea (United States)

    Blumenberg, Martin; Seifert, Richard; Kasten, Sabine; Bahlmann, Enno; Michaelis, Walter


    Bacteriohopanepolyols (BHPs) are lipid constituents of many bacterial groups. Geohopanoids, the diagenetic products, are therefore ubiquitous in organic matter of the geosphere. To examine the potential of BHPs as environmental markers in marine sediments, we investigated a Holocene sediment core from the Black Sea. The concentrations of BHPs mirror the environmental shift from a well-mixed lake to a stratified marine environment by a strong and gradual increase from low values (˜30 μg g -1 TOC) in the oldest sediments to ˜170 μg g -1 TOC in sediments representing the onset of a permanently anoxic water body at about 7500 years before present (BP). This increase in BHP concentrations was most likely caused by a strong increase in bacterioplanktonic paleoproductivity brought about by several ingressions of Mediterranean Sea waters at the end of the lacustrine stage (˜9500 years BP). δ 15N values coevally decreasing with increasing BHP concentrations may indicate a shift from a phosphorus- to a nitrogen-limited setting supporting growth of N 2-fixing, BHP-producing bacteria. In sediments of the last ˜3000 years BHP concentrations have remained relatively stable at about 50 μg g -1 TOC. The distributions of major BHPs did not change significantly during the shift from lacustrine (or oligohaline) to marine conditions. Tetrafunctionalized BHPs prevailed throughout the entire sediment core, with the common bacteriohopanetetrol and 35-aminobacteriohopanetriol and the rare 35-aminobacteriohopenetriol, so far only known from a purple non-sulfur α-proteobacterium, being the main components. Other BHPs specific to cyanobacteria and pelagic methanotrophic bacteria were also found but only in much smaller amounts. Our results demonstrate that BHPs from microorganisms living in deeper biogeochemical zones of marine water columns are underrepresented or even absent in the sediment compared to the BHPs of bacteria present in the euphotic zone. Obviously, the assemblage of

  15. Tectonics and sedimentary process in the continental talud in Uruguay

    International Nuclear Information System (INIS)

    De Santa Ana, H.; Soto, M.; Morales, E.; Tomasini, J.; Hernandez-Molina, F.; Veroslavsky, G.


    The morphology and evolution of the continental margin of Uruguay is due to the interaction of an important set of sedimentary processes. The contourite and turbiditic are the most significant processes which are associated with the development of submarine canyons as well as the gravitational mass respect to major landslides. These processes generate erosional and depositional features with a direct impact on different areas of application, which have potential environmental risks (gravitational landslides, earthquakes, tsunamis) and potential economic resources

  16. Favorability for uranium in tertiary sedimentary rocks, southwestern Montana

    International Nuclear Information System (INIS)

    Wopat, M.A.; Curry, W.E.; Robins, J.W.; Marjaniemi, D.K.


    Tertiary sedimentary rocks in the basins of southwestern Montana were studied to determine their favorability for potential uranium resources. Uranium in the Tertiary sedimentary rocks was probably derived from the Boulder batholith and from silicic volcanic material. The batholith contains numerous uranium occurrences and is the most favorable plutonic source for uranium in the study area. Subjective favorability categories of good, moderate, and poor, based on the number and type of favorable criteria present, were used to classify the rock sequences studied. Rocks judged to have good favorability for uranium deposits are (1) Eocene and Oligocene strata and undifferentiated Tertiary rocks in the western Three Forks basin and (2) Oligocene rocks in the Helena basin. Rocks having moderate favorability consist of (1) Eocene and Oligocene strata in the Jefferson River, Beaverhead River, and lower Ruby River basins, (2) Oligocene rocks in the Townsend and Clarkston basins, (3) Miocene and Pliocene rocks in the Upper Ruby River basin, and (4) all Tertiary sedimentary formations in the eastern Three Forks basin, and in the Grasshopper Creek, Horse Prairie, Medicine Lodge Creek, Big Sheep Creek, Deer Lodge, Big Hole River, and Bull Creek basins. The following have poor favorability: (1) the Beaverhead Conglomerate in the Red Rock and Centennial basins, (2) Eocene and Oligocene rocks in the Upper Ruby River basin, (3) Miocene and Pliocene rocks in the Townsend, Clarkston, Smith River, and Divide Creek basins, (4) Miocene through Pleistocene rocks in the Jefferson River, Beaverhead River, and Lower Ruby River basins, and (5) all Tertiary sedimentary rocks in the Boulder River, Sage Creek, Muddy Creek, Madison River, Flint Creek, Gold Creek, and Bitterroot basins

  17. Estimation of sedimentary proxy records together with associated uncertainty


    Goswami, B.; Heitzig, J.; Rehfeld, K.; Marwan, N.; Anoop, A.; Prasad, S.; Kurths, J.


    Sedimentary proxy records constitute a significant portion of the recorded evidence that allows us to investigate paleoclimatic conditions and variability. However, uncertainties in the dating of proxy archives limit our ability to fix the timing of past events and interpret proxy record intercomparisons. While there are various age-modeling approaches to improve the estimation of the age–depth relations of archives, relatively little focus has been placed on the propagation...

  18. Properties of Pliocene sedimentary geomagnetic reversal records from the Mediterranean


    Linssen, J.H.


    In the history of the Earth the dipolar geomagnetic field has frequently reversed polarity. Though this property was already known early this century (Brunhes, 1906), nowadays the characteristics and the origin of polarity transitions are still largely unknown. The geomagnetic field and its variations are recorded in rocks as a natural remanent magnetization (NRM) during the formation of these rocks. The study of the NRM in sedimentary reversal records is the subject of this dissertation.

  19. Radioactive thickness gauge (1962)

    International Nuclear Information System (INIS)

    Guizerix, J.


    The author describes a thickness gauge in which the scintillating crystal detector alternately 'sees' a radioactive source through the material which is to be measured and then a control source of the same material; the radiations are separated in time by an absorbing valve whose sections are alternately full and hollow. The currents corresponding to the two sources are separated beyond the photomultiplier tube by a detector synchronized with the rotation of the valve. The quotient of these two currents is then obtained with a standard recording potentiometer. It is found that the average value of the response which is in the form G = f(I 1 /I 2 ) is not affected by decay of the radioactive sources, and that it is little influenced by variations of high tension, temperature, or properties of the air in the source detector interval. The performance of the gauge is given. (author) [fr

  20. Thick-Big Descriptions

    DEFF Research Database (Denmark)

    Lai, Signe Sophus

    The paper discusses the rewards and challenges of employing commercial audience measurements data – gathered by media industries for profitmaking purposes – in ethnographic research on the Internet in everyday life. It questions claims to the objectivity of big data (Anderson 2008), the assumption...... communication systems, language and behavior appear as texts, outputs, and discourses (data to be ‘found’) – big data then documents things that in earlier research required interviews and observations (data to be ‘made’) (Jensen 2014). However, web-measurement enterprises build audiences according...... to a commercial logic (boyd & Crawford 2011) and is as such directed by motives that call for specific types of sellable user data and specific segmentation strategies. In combining big data and ‘thick descriptions’ (Geertz 1973) scholars need to question how ethnographic fieldwork might map the ‘data not seen...

  1. Disentangling The Thick Concept Argument

    DEFF Research Database (Denmark)

    Blomberg, Olle


    Critics argue that non-cognitivism cannot adequately account for the existence and nature of some thick moral concepts. They use the existence of thick concepts as a lever in an argument against non-cognitivism, here called the Thick Concept Argument (TCA). While TCA is frequently invoked...

  2. DOE workshop: Sedimentary systems, aqueous and organic geochemistry

    International Nuclear Information System (INIS)


    A DOE workshop on sedimentary systems, aqueous and organic geochemistry was held July 15-16, 1993 at Lawrence Berkeley Laboratory. Papers were organized into several sections: Fundamental Properties, containing papers on the thermodynamics of brines, minerals and aqueous electrolyte solutions; Geochemical Transport, covering 3-D imaging of drill core samples, hydrothermal geochemistry, chemical interactions in hydrocarbon reservoirs, fluid flow model application, among others; Rock-Water Interactions, with presentations on stable isotope systematics of fluid/rock interaction, fluid flow and petotectonic evolution, grain boundary transport, sulfur incorporation, tracers in geologic reservoirs, geothermal controls on oil-reservoir evolution, and mineral hydrolysis kinetics; Organic Geochemistry covered new methods for constraining time of hydrocarbon migration, kinetic models of petroleum formation, mudstones in burial diagenesis, compound-specific carbon isotope analysis of petroleums, stability of natural gas, sulfur in sedimentary organic matter, organic geochemistry of deep ocean sediments, direct speciation of metal by optical spectroscopies; and lastly, Sedimentary Systems, covering sequence stratigraphy, seismic reflectors and diagenetic changes in carbonates, geochemistry and origin of regional dolomites, and evidence of large comet or asteroid impacts at extinction boundaries

  3. DOE workshop: Sedimentary systems, aqueous and organic geochemistry

    Energy Technology Data Exchange (ETDEWEB)


    A DOE workshop on sedimentary systems, aqueous and organic geochemistry was held July 15-16, 1993 at Lawrence Berkeley Laboratory. Papers were organized into several sections: Fundamental Properties, containing papers on the thermodynamics of brines, minerals and aqueous electrolyte solutions; Geochemical Transport, covering 3-D imaging of drill core samples, hydrothermal geochemistry, chemical interactions in hydrocarbon reservoirs, fluid flow model application, among others; Rock-Water Interactions, with presentations on stable isotope systematics of fluid/rock interaction, fluid flow and petotectonic evolution, grain boundary transport, sulfur incorporation, tracers in geologic reservoirs, geothermal controls on oil-reservoir evolution, and mineral hydrolysis kinetics; Organic Geochemistry covered new methods for constraining time of hydrocarbon migration, kinetic models of petroleum formation, mudstones in burial diagenesis, compound-specific carbon isotope analysis of petroleums, stability of natural gas, sulfur in sedimentary organic matter, organic geochemistry of deep ocean sediments, direct speciation of metal by optical spectroscopies; and lastly, Sedimentary Systems, covering sequence stratigraphy, seismic reflectors and diagenetic changes in carbonates, geochemistry and origin of regional dolomites, and evidence of large comet or asteroid impacts at extinction boundaries.

  4. Modern sedimentary processes along the Doce river adjacent continental shelf

    Directory of Open Access Journals (Sweden)

    Valéria da Silva Quaresma

    Full Text Available In areas of the continental shelf where sediment supply is greater than the sediment dispersion capacity, an extensive terrigenous deposits and consequently submerged deltas can be formed. The Eastern Brazilian shelf is characterized by the occurrence of river feed deltas in between starving coasts. Herein, modern sedimentary processes acting along the Doce river adjacent continental shelf are investigated. The main objective was to understand the shelf sediment distribution, recognizing distinct sedimentary patterns and the major influence of river sediment discharge in the formation of shelf deposits. The study used 98 surficial samples that were analyzed for grain size, composition and bulk density. Results revealed 3 distinct sectors: south - dominated by mud fraction with a recent deposition from riverine input until 30 m deep and from this depth bioclastic sands dominate; central north - sand mud dominated, been recognized as a bypass zone of resuspended sediment during high energy events; and north - relict sands with high carbonate content. The modern sedimentation processes along the Doce river continental shelf is dominated by distinct sedimentary regimes, showing a strong fluvial influence associated with wave/wind induced sediment dispersion and a carbonate regime along the outer shelf. These regimes seem to be controlled by the distance from the river mouth and bathymetric gradients.

  5. Sedimentary facies analysis of the Mesozoic clastic rocks in Southern Peru (Tacna, 18°S): Towards a paleoenvironmental Redefinition and stratigraphic Reorganization (United States)

    Alván, Aldo; Jacay, Javier; Caracciolo, Luca; Sánchez, Elvis; Trinidad, Inés


    The Mesozoic rocks of southern Peru comprise a Middle Jurassic to Early Cretaceous sedimentary sequence deposited during a time interval of approximately 34 Myr. In Tacna, these rocks are detrital and constitute the Yura Group (Callovian to Tithonian) and the Hualhuani Formation (Berriasian). Basing on robust interpretation of facies and petrographic analysis, we reconstruct the depositional settings of such units and provide a refined stratigraphic framework. Accordingly, nine types of sedimentary facies and six architectural elements are defined. They preserve the record of a progradational fluvial system, in which two styless regulated the dispersion of sediments: (i) a high-to moderate-sinuosity meandering setting (Yura Group), and a later (ii) incipient braided setting (Hualhuani Formation). The Yura Group (Callovian-Tithonian) represents the onset of floodplain deposits and lateral accretion of point-bar deposits sited on a semi-flat topography. Nonetheless, the progradational sequence was affected by at least two rapid marine ingressions occurred during Middle Callovian and Tithonian times. Such marine ingressions reveal the proximity of a shallow marine setting and incipient carbonate deposition. In response to increase in topographic gradient, the Hualhuani Formation (Berriasian) deposited as extensive multistory sandy channels. The mineralogy of the Mesozoic sediments suggests sediment supplies and intense recycling from a craton interior (i.e. Amazon Craton and/or plutonic sources) located eastward of the study area.

  6. Modeling groundwater age using tritium and groundwater mineralization processes - Morondava sedimentary basin, Southwestern Madagascar

    International Nuclear Information System (INIS)



    The tritium method in the lumped parameter approach was used for groundwater dating in the Morondava sedimentary basin, Southwestern Madagascar. Tritium data were interpreted by the dispersion model. The modeling results, with P D values between 0.05 and 0.7, show that shallow groundwater age is ranging from 17 to 56 years. Different types of chemical composition were determined for these shallow ground waters, among others, Ca-HCO 3 , Ca-Na-HCO 3 , Ca-Na-Mg-HCO 3 , Ca-K-HCO 3 -NO 3 -SO 4 , Na-Cl, or Ca-Na-Mg-Cl. Likewise, deeper ground waters show various chemical type such as Ca-Na-HCO 3 , Ca-Mg-Na H CO 3 , Ca-Na-Mg-HCO 3 , Ca-Na-Mg-HCO 3 -Cl-SO 4 , Ca-Mg-HCO 3 , Na-Ca-Mg-HCO 3 -SO 4 -Cl, Na-Cl-HCO 3 or Na-HCO 3 -Cl. To evaluate the geochemical processes, the NETPATH inverse geochemical modeling type was implemented. The modeling results show that silicate minerals dissolution , including olivine, plagioclase, and pyroxene is more important than calcite or dolomite dissolution, for both shallow and deeper groundwater . In the Southern part of the study area, while halite dissolution is likely to be the source of shallow groundwater chloride concentration rise, the mineral precipitation seems to be responsible for less chloride content in deeper groundwater. Besides, ion exchange contributes to the variations of major cations concentrations in groundwater. The major difference between shallow and deep groundwater mineralization process lies in the leaching of marine aerosols deposits by local precipitation, rapidly infiltrated through the sandy formation and giving marine chemical signature to shallow groundwater [fr

  7. Shallow subsurface geology and Vs characteristics of sedimentary units throughout Rasht City, Iran

    Directory of Open Access Journals (Sweden)

    Behzad Mehrabi


    Full Text Available The Manjil-Rudbar earthquake of June 1990 caused widespread damage to buildings in the city of Rasht located
    60 km from the epicenter. Seismic surveys, including refraction P-wave, S-wave and downhole tests, were
    carried out to study subsurface geology and classify materials in the city of Rasht. Rasht is built on Quaternary
    sediments consisting of old marine (Q1m, deltaic (Q2d, undivided deltaic sediments with gravel (Qdg and
    young marine (Q2m deposits. We used the variations of Vp in different materials to separate sedimentary
    boundaries. The National Earthquake Hazard Reduction Program (NEHRP scheme was used for site classification.
    Average S-wave velocity to a depth of 30 m was used to develop site categories, based on measured Vs values
    in 35 refraction seismic profiles and 4 downhole tests. For each geological unit histograms of S-wave velocity
    were calculated. This study reveals that the Vs(30 of most of the city falls into categories D and C of NEHRP
    site classification. Average horizontal spectral amplification (AHSA in Rasht was calculated using Vs(30 . The
    AHSA map clearly indicates that the amplification factor east and north of the city are higher than those of south
    and central parts. The results show that the lateral changes and heterogeneities in Q1m sediments are significant
    and most damaged buildings in 1990 Manjil earthquake were located in this unit.

  8. Use of variations in unit cell length, reflectance and hardness for determining the origin of Fe disulphides in sedimentary rocks (United States)

    Dill, H. G.; Eberhard, E.; Hartmann, B.


    Fe disulphides are common opaque accessories in sedimentary rocks. Both marcasite and pyrite may shed some light on the depositional environment and help determine the diagenesis of their host rocks. Quantitative ore microscopy (reflectance measurements, Vickers hardness numbers) and X-ray diffraction methods, supplemented with scanning electron microscopy and chemical analyses, were applied to pyrite (and some marcasite) hosted by sedimentary rocks spanning the interval from the Devonian to the Pliocene, and formed in various marine and continental environments. Quantitative ore microscopy of pyrites of sedimentary origin does not seem to be an efficient tool for analyzing the environment owing to the inhomogeneous nature of sulphide aggregates when viewed under the ore microscope, and the variable amounts of minor elements (e.g., As, Ni, and Co) that control the reflectance values (RV) and Vickers hardness numbers (VHN) of the host sulphides. However, such parameters as crystal habit and unit cell length of pyrite, which correlate with FeS x, are useful for environmental analysis. The redox conditions and the presence of organic remains during formation are the main factors determining these crystallographic parameters. Differences in these parameters from those of pure, ideal FeS 2 can be related to substitution of, e.g., wustite in the pyrite lattice, reflecting moderate oxidation (i.e. in the microenvironment). As far as crystal habit and length of the cell edge are concerned, late stage diagenesis is obviously less important than the microenvironment attending initial formation. The environment of deposition (i.e. the macroenvironment) of pyrite-bearing rocks has no influence on the crystal morphology or the length of the unit cell of Fe disulphide. X-ray diffraction measurements demonstrate that this method provides useful evidence on the microenvironment of sulphide precipitation around a single, equant pyrite, as well as around pyritized fossils.

  9. Late Neogene marine incursions and the ancestral Gulf of California (United States)

    McDougall, K.


    The late Neogene section in the Salton Trough, California, and along the lower Colorado River in Arizona is composed of marine units bracketed by nonmarine units. Microfossils from the marine deposits indicate that a marine incursion inundated the Salton Trough during the late Miocene. Water depths increased rapidly in the Miocene and eventually flooded the region now occupied by the Colorado River as far north as Parker, Arizona. Marine conditions were restricted in the Pliocene as the Colorado River filled the Salton Trough with sediments and the Gulf of California assumed its present configuration. Microfossils from the early part of this incursion include a diverse assemblage of benthic foraminifers (Amphistegina gibbosa, Uvigerina peregrina, Cassidulina delicata, and Bolivina interjuncta), planktic foraminifers (Globigerinoides obliquus, G. extremus, and Globigerina nepenthes), and calcareous nannoplankton (Discoaster brouweri, Discoaster aff. Discoaster surculus, Sphenolithus abies, and S. neoabies), whereas microfossils in the final phase contain a less diverse assemblage of benthic foraminifers that are diagnostic of marginal shallow-marine conditions (Ammonia, Elphidium, Bolivina, Cibicides, and Quinqueloculina). Evidence of an earlier middle Miocene marine incursion comes from reworked microfossils found near Split Mountain Gorge in the Fish Creek Gypsum (Sphenolithus moriformis) and near San Gorgonio Pass (Cyclicargolithus floridanus and Sphenolithus heteromorphus and planktic foraminifers). The middle Miocene incursion may also be represented by the older marine sedimentary rocks encountered in the subsurface near Yuma, Arizona, where rare middle Miocene planktic foraminifers are found. ?? 2008 The Geological Society of America.

  10. Hg concentrations from Late Triassic and Early Jurassic sedimentary rocks: first order similarities and second order depositional and diagenetic controls (United States)

    Yager, J. A.; West, A. J.; Bergquist, B. A.; Thibodeau, A. M.; Corsetti, F. A.; Berelson, W.; Bottjer, D. J.; Rosas, S.


    Mercury concentrations in sediments have recently gained prominence as a potential tool for identifying large igneous province (LIP) volcanism in sedimentary records. LIP volcanism coincides with several mass extinctions during the Phanerozoic, but it is often difficult to directly tie LIP activity with the record of extinction in marine successions. Here, we build on mercury concentration data reported by Thibodeau et al. (Nature Communications, 7:11147, 2016) from the Late Triassic and Early Jurassic of New York Canyon, Nevada, USA. Increases in Hg concentrations in that record were attributed to Central Atlantic Magmatic Province (CAMP) activity in association with the end-Triassic mass extinction. We expand the measured section from New York Canyon and report new mercury concentrations from Levanto, Peru, where dated ash beds provide a discrete chronology, as well as St. Audrie's Bay, UK, a well-studied succession. We correlate these records using carbon isotopes and ammonites and find similarities in the onset of elevated Hg concentrations and Hg/TOC in association with changes in C isotopes. We also find second order patterns that differ between sections and may have depositional and diagenetic controls. We will discuss these changes within a sedimentological framework to further understand the controls on Hg concentrations in sedimentary records and their implications for past volcanism.

  11. Recent sedimentary history of organic matter and nutrient accumulation in the Ohuira Lagoon, northwestern Mexico. (United States)

    Ruiz-Fernández, Ana Carolina; Frignani, Mauro; Tesi, Tommaso; Bojórquez-Leyva, Humberto; Bellucci, Luca Giorgio; Páez-Osuna, Federico


    (210)Pb-derived sediment accumulation rates, as well as a suite of geochemical proxies (Al, Fe, delta(13)C, delta(15)N), were used to assess the time-dependent variations of C, N, and P fluxes recorded in two sediment cores collected at Ohuira Lagoon, in the Gulf of California, Mexico, during the last 100 years. Sedimentary C, N, and P concentrations increased with time and were related to land clearing, water impoundment, and agriculture practices, such as fertilization. C:N:P ratios and delta(13)C suggested an estuarine system that is responsive to increased C loading from a N-limited phytoplankton community, whereas delta(15)N values showed the transition between an estuarine-terrestrial to an estuarine-more marine environment, as a consequence of the declining freshwater supply into the estuary due to the channeling and impoundment of El Fuerte River between 1900 and 1956. The recent increases in nutrient fluxes (2- to 9-fold the pre-anthropogenic fluxes of C and N, and 2 to 13 times for P) taking place in the mainland from the 1940s, were related to the expansion of the intensive agriculture fields and to the more recent development of shrimp farming activities.

  12. The Indosinian orogeny: A perspective from sedimentary archives of north Vietnam (United States)

    Rossignol, Camille; Bourquin, Sylvie; Hallot, Erwan; Poujol, Marc; Dabard, Marie-Pierre; Martini, Rossana; Villeneuve, Michel; Cornée, Jean-Jacques; Brayard, Arnaud; Roger, Françoise


    The Triassic stratigraphic framework for the Song Da and the Sam Nua basins, north Vietnam, suffers important discrepancies regarding both the depositional environments and ages of the main formations they contain. Using sedimentological analyses and dating (foraminifer biostratigraphy and U-Pb dating on detrital zircon), we provide an improved stratigraphic framework for both basins. A striking feature in the Song Da Basin, located on the southern margin of the South China Block, is the diachronous deposition, over a basal unconformity, of terrestrial and marine deposits. The sedimentary succession of the Song Da Basin points to a foreland setting during the late Early to the Middle Triassic, which contrasts with the commonly interpreted rift setting. On the northern margin of the Indochina Block, the Sam Nua basin recorded the activity of a proximal magmatic arc during the late Permian up to the Anisian. This arc resulted from the subduction of a southward dipping oceanic slab that separated the South China block from the Indochina block. During the Middle to the Late Triassic, the Song Da and Sam Nua basins underwent erosion that led to the formation of a major unconformity, resulting from the erosion of the Middle Triassic Indosinian mountain belt, built after an ongoing continental collision between the South China and the Indochina blocks. Later, during the Late Triassic, as syn- to post-orogenic foreland basins in a terrestrial setting, the Song Da and Sam Nua basins experienced the deposition of very coarse detrital material representing products of the mountain belt erosion.

  13. Sedimentary architecture and depositional environment of Kudat Formation, Sabah, Malaysia (United States)

    Ghaheri, Samira; Suhaili, Mohd; Sapari, Nasiman; Momeni, Mohammadsadegh


    Kudat Formation originated from deep marine environment. Three lithofacies association of deep marine turbidity channel was discovered in three Members of the Kudat Formation in Kudat Peninsula, Sabah, Malaysia. Turbidite and deep marine architecture elements was described based on detailed sedimentological studies. Four architecture elements were identified based on each facies association and their lithology properties and character: inner external levee that was formed by turbidity flows spill out from their confinement of channel belt; Lobes sheet that was formed during downslope debris flows associated with levee; Channel fill which sediments deposited from high to low density currents with different value of sediment concentration; and overbank terrace which was formed by rapid suspension sedimentation. The depositional environment of Kudat Formation is shelf to deep marine fan.

  14. The Early to Middle Triassic continental–marine transition of NW Bulgaria: sedimentology, palynology and sequence stratigraphy


    Ajdanlijsky George; Götz Annette E.; Strasser André


    Sedimentary facies and cycles of the Triassic continental–marine transition of NW Bulgaria are documented in detail from reference sections along the Iskar river gorge between the villages of Tserovo and Opletnya. The depositional environments evolved from anastomosing and meandering river systems in the Petrohan Terrigenous Group to mixed fluvial and tidal settings in the Svidol Formation, and to peritidal and shallow-marine conditions in the Opletnya Member of the Mogila Formation. For the ...


    Directory of Open Access Journals (Sweden)

    V. I. Popkov


    Full Text Available The available data on well-studied areas of the Turan platform (as an example are reviewed and analyzed to reveal the role of con-sedimentation and post-sedimentation tectonic movements in formation of dislocations of the sedimentary cover. At the background of the long-term (tens and hundreds of million years quiet evolution of the territory under study, short-term intervals are distinguished, which duration amounts to the first millions of years (typically manifested in one or two stratigraphic layers; in such time intervals, tectonic movements were dramatically boosted and accompanied by land uplifting, sea regression, erosion of sediments accumulated earlier and manifestation of deformation processes.The paleotectonic reconstructions show that during such ‘revolutionary’ stages, large tectonic elements occurred along with local uplifts that added to their complexity. In the region under study, the Pre-Jurassic, Pre-Cretaceous (Late Okoma, Pre-Danish and the Pre-Middle Miocene gaps in sedimentation are studied in detail. It is shown that only during the above four periods of sedimentation gaps and accompanying erosion-denudation processes, the regional structures gained from 50 to 80% of their current amplitudes at the bottom of the cover, and the Pre-Danish and Pre-Middle Miocene washout periods were most important.Local uplift also developed impulsively and primarily due to the post-sedimentation movements. Cross-sections of anticlines studied in detail (Figures 1 to 3 are discussed as examples that clearly show the increase of erosional shearing of the sediments accumulated earlier towards domes of uplifts without any con-sedimentation decrease of their thicknesses. During these periods of the geologic history, regardless of their short duration, folded dislocation gained up to 65–90% of their current amplitudes. The periods of activation were separated by long relatively quiescent tectonic periods with the gradually slowing down

  16. Sea-floor morphology and sedimentary environments of western Block Island Sound, northeast of Gardiners Island, New York (United States)

    McMullen, Katherine Y.; Poppe, Lawrence J.; Danforth, William W.; Blackwood, Dann S.; Clos, Andrew R.; Parker, Castle E.


    Multibeam-echosounder data, collected during survey H12299 by the National Oceanic and Atmospheric Administration in a 162-square-kilometer area of Block Island Sound, northeast of Gardiners Island, New York, are used along with sediment samples and bottom photography, collected at 37 stations in this area by the U.S. Geological Survey during cruise 2013-005-FA, to interpret sea-floor features and sedimentary environments. These data and interpretations provide important base maps for future studies of the sea floor, focused, for example, on benthic ecology and resource management. The features and sedimentary environments on the sea floor are products of the glacial history and modern tidal regime. Features include bedforms such as sand waves and megaripples, boulders, a large current-scoured depression, exposed glaciolacustrine sediments, and areas of modern marine sediment. Sand covers much of the study area and is often in the form of sand waves and megaripples, which indicate environments characterized by coarse-grained bedload transport. Boulders and gravelly lag deposits, which indicate environments of erosion or nondeposition, are found off the coast of Gardiners Island and on bathymetric highs, probably marking areas where deposits associated with recessional ice-front positions, the northern flank of the terminal moraine, or coastal-plain sediments covered with basal till are exposed. Bottom photographs and video of boulders show that they are commonly covered with sessile fauna. Strong tidal currents have produced the deep scour depression along the northwestern edge of the study area. The eastern side of this depression is armored with a gravel lag. Sea-floor areas characterized by modern marine sediments appear featureless at the 2-meter resolution of the bathymetry and flat to current rippled in the photography. These modern environments are indicative of sediment sorting and reworking.

  17. Early Pliocene Hiatus in Sand Output by the Colorado River: Evidence From Marine Deposits in the Salton Trough, Southern California (United States)

    Dorsey, R. J.; Bykerk-Kauffman, A.


    Early Pliocene deposits in the western Salton Trough preserve a high-fidelity record of sediment dispersal into the marine realm during initiation and early evolution of the Colorado River (CR). Grain-size fractionation, sediment routing, and transport dynamics of the early CR delta are recorded in sediments of the Fish Creek - Vallecito basin, which was located ~100 km south of Yuma along the transform plate boundary at 5 Ma. Early Pliocene delivery of CR sand to the basin took place in two distinct pulses: (1) deposition of sandy turbidites (Wind Caves Mbr of the Latrania Fm) in a restricted submarine canyon at Split Mt Gorge between ~5.3 and 5.1 Ma; and (2) progradation of a thick, widespread, coarsening-up deltaic sequence of marine mudstone, sandstone, and coquinas (Deguynos Fm) between ~4.8 and 4.2 Ma. Estimated flux of CR sediment during Wind Caves deposition was weak (~3-5 Mt/yr) compared to the long-term average (172±64 Mt/yr). The two pulses of CR sand input are separated by the Coyote Clay (CC, ~5.1-4.8 Ma), a regionally correlable, greenish-yellow-weathering marine claystone unit at the base of the Deguynos Fm. CC gradationally overlies Wind Caves turbidites in the area of the paleocanyon. In contrast, in the Coyote Mts 15-23 km to the south and SE, CC rests on coarse-grained locally-derived late Miocene sedimentary rocks, Alverson volcanics, and metamorphic basement rock along a regional unconformity. Identical claystone facies occur in the NW Indio Hills (restores to Yuma at the mouth of the CR at 5 Ma), and Sierra Cucapa in Mexico (~200 km south of Yuma at 5 Ma). Marine localities outside of the Wind Caves paleocanyon experienced slow to negligible sedimentation along a rugged rocky shoreline until abrupt arrival of CR-derived clay. CC accumulated in a sand-starved, pro-delta marine setting (Winker, 1987) over an inferred N-S distance of ~200 km. We therefore reject an alternate hypothesis that CC accumulated on the muddy slope of the prograding CR

  18. Massive expansion of marine archaea during a mid-Cretaceous oceanic anoxic event

    DEFF Research Database (Denmark)

    Kuypers, M.M.M.; Blokker, P.; Erbacher, J.


    molecular fossils indicates that these archaea were living chemoautotrophically. Their massive expansion may have been a response to the strong stratification of the ocean during this anoxic event. Indeed, the sedimentary record of archaeal membrane lipids suggests that this anoxic event marks a time......Biogeochemical and stable carbon isotopic analysis of black-shale sequences deposited during an Albian oceanic anoxic event (∼112 million years ago) indicate that up to 80 weight percent of sedimentary organic carbon is derived from marine, nonthermophilic archaea. The carbon-13 content of archaeal...

  19. Major element compositions of fluid inclusions from hydrothermal vein-type deposits record eroded sedimentary units in the Schwarzwald district, SW Germany (United States)

    Walter, Benjamin F.; Burisch, Mathias; Marks, Michael A. W.; Markl, Gregor


    Mixing of sedimentary formation fluids with basement-derived brines is an important mechanism for the formation of hydrothermal veins. We focus on the sources of the sediment-derived fluid component in ore-forming processes and present a comprehensive fluid inclusion study on 84 Jurassic hydrothermal veins from the Schwarzwald mining district (SW Germany). Our data derive from about 2300 fluid inclusions and reveal differences in the average fluid composition between the northern, central, and southern Schwarzwald. Fluids from the northern and southern Schwarzwald are characterised by high salinities (18-26 wt% NaCl+CaCl2), low Ca/(Ca+Na) mole ratios (0.1-0.4), and variable Cl/Br mass ratios (30-1140). In contrast, fluids from the central Schwarzwald show even higher salinities (23-27 wt% NaCl+CaCl2), higher Ca/(Ca+Na) mole ratios (0.2-0.9), and less variable Cl/Br mass ratios (40-130). These fluid compositions correlate with the nature and thickness of the now eroded sedimentary cover rocks. Compared to the northern and the southern Schwarzwald, where halite precipitation occurred during the Middle Triassic, the sedimentary basin in the central Schwarzwald was relatively shallow at this time and no halite was precipitated. Accordingly, Cl/Br ratios of fluids from the central Schwarzwald provide no evidence for the reaction of a sedimentary brine with halite, whereas those from the northern and southern Schwarzwald do. Instead, elevated Ca/(Ca+Na), high SO4 contents, and relatively low Cl/Br imply the presence of a gypsum dissolution brine during vein formation in the central Schwarzwald which agrees with the reconstructed regional Triassic geology. Hence, the information archived in fluid inclusions from hydrothermal veins in the crystalline basement has the potential for reconstructing sedimentary rocks in the former overburden.

  20. Realistic modelling of observed seismic motion in complex sedimentary basins

    International Nuclear Information System (INIS)

    Faeh, D.; Panza, G.F.


    Three applications of a numerical technique are illustrated to model realistically the seismic ground motion for complex two-dimensional structures. First we consider a sedimentary basin in the Friuli region, and we model strong motion records from an aftershock of the 1976 earthquake. Then we simulate the ground motion caused in Rome by the 1915, Fucino (Italy) earthquake, and we compare our modelling with the damage distribution observed in the town. Finally we deal with the interpretation of ground motion recorded in Mexico City, as a consequence of earthquakes in the Mexican subduction zone. The synthetic signals explain the major characteristics (relative amplitudes, spectral amplification, frequency content) of the considered seismograms, and the space distribution of the available macroseismic data. For the sedimentary basin in the Friuli area, parametric studies demonstrate the relevant sensitivity of the computed ground motion to small changes in the subsurface topography of the sedimentary basin, and in the velocity and quality factor of the sediments. The total energy of ground motion, determined from our numerical simulation in Rome, is in very good agreement with the distribution of damage observed during the Fucino earthquake. For epicentral distances in the range 50km-100km, the source location and not only the local soil conditions control the local effects. For Mexico City, the observed ground motion can be explained as resonance effects and as excitation of local surface waves, and the theoretical and the observed maximum spectral amplifications are very similar. In general, our numerical simulations permit the estimate of the maximum and average spectral amplification for specific sites, i.e. are a very powerful tool for accurate micro-zonation. (author). 38 refs, 19 figs, 1 tab

  1. Pore water colloid properties in argillaceous sedimentary rocks. (United States)

    Degueldre, Claude; Cloet, Veerle


    The focus of this work is to evaluate the colloid nature, concentration and size distribution in the pore water of Opalinus Clay and other sedimentary host rocks identified for a potential radioactive waste repository in Switzerland. Because colloids could not be measured in representative undisturbed porewater of these host rocks, predictive modelling based on data from field and laboratory studies is applied. This approach allowed estimating the nature, concentration and size distributions of the colloids in the pore water of these host rocks. As a result of field campaigns, groundwater colloid concentrations are investigated on the basis of their size distribution quantified experimentally using single particle counting techniques. The colloid properties are estimated considering data gained from analogue hydrogeochemical systems ranging from mylonite features in crystalline fissures to sedimentary formations. The colloid concentrations were analysed as a function of the alkaline and alkaline earth element concentrations. Laboratory batch results on clay colloid generation from compacted pellets in quasi-stagnant water are also reported. Experiments with colloids in batch containers indicate that the size distribution of a colloidal suspension evolves toward a common particle size distribution independently of initial conditions. The final suspension size distribution was found to be a function of the attachment factor of the colloids. Finally, calculations were performed using a novel colloid distribution model based on colloid generation, aggregation and sedimentation rates to predict under in-situ conditions what makes colloid concentrations and size distributions batch- or fracture-size dependent. The data presented so far are compared with the field and laboratory data. The colloid occurrence, stability and mobility have been evaluated for the water of the considered potential host rocks. In the pore water of the considered sedimentary host rocks, the clay

  2. Radioactive sedimentary deposits concerning the coasts of the Camargue

    International Nuclear Information System (INIS)


    CRII-RAD has detected abnormal levels of radioactivity on some beaches situated near the Espiguette lighthouse in the south-east coast of France. This document presents the in-situ measurements performed by IPSN. These results confirm a relevant increase of gamma radiation in sedimentary deposits. Chemical analyses have shown that this radioactivity is due to potassium 40 and radionuclides from thorium and uranium series. There is no doubt about the natural origin of this radioactivity but thorough geo-chemical studies are necessary to see whether these radioactive sands are a consequence of nearby industrial activities concerning ore dressing. (A.C.)

  3. Hydrogeology of exogenic epigenic uranium deposits (sedimentary type) in Uzbekistan

    International Nuclear Information System (INIS)

    Irgashev, Yu.I.; Gavrilov, V.A.; Muslimov, B.A.


    Common problems of hydrogeology and geotechnology for uranium deposits (sedimentary type) in the Republic of Uzbekistan are discussed in the paper. Hydrogeology includes studies of texture of water-bearing horizons, occurrences of ore bodies in horizons, hydrochemical survey, hydrodynamics and engineering geology. Features of deposits workable by underground leaching are presented. Such terms as 'water-bearing horizon', 'efficiency', 'water-bearing bed' are explained accounting the results of 30 year investigations conducted during prospecting, designing and exploitation of uranium deposits. Stages of hydrogeological survey are listed and features of each of them are described. Importance of geotechnology for a deposit characterization is shown. (author). 6 refs.; 1 fig.; 1 tab

  4. Groundwater Recharge Process in the Morondava Sedimentary Basin, Southwestern Madagascar

    International Nuclear Information System (INIS)

    Mamifarananahary, E.; Rajaobelison, J.; Ramaroson, V.; Rahobisoa, J.J.


    The groundwater recharge process in the Morondava Sedimentary basin was determined using chemical and isotopic tools. The results showed that the main recharge into shallow aquifer is from infiltration of evaporated water. Into deeper aquifer, it is done either from direct infiltration of rainfall from recharge areas on the top of the hill in the East towards the low-lying discharge areas in the West, or from vertical infiltration of evaporated shallow groundwater. The tritium contents suggest that recharge from shallow aquifers is from recent rainfall with short residence time while recharge into deeper aquifers is from older rainfall with longer residence time.

  5. Study on epigenetic alterations of ore-enclosing sedimentary rocks

    International Nuclear Information System (INIS)

    Kondrat'eva, I.A.; Komarova, G.V.


    Epigenetic alterations of sedimentary rocks under effect of exogenous undeground waters of various types: near-surface, ground, stratum, and deep circulation waters, are considered. Association to postsedimentary tectonic structures, confinement of neogenesis to areas of high permeability (porous or crack one), geochemical contradictions between mineral neogenis and facial outlook of deposits, noncoincidence of variability gradient of authigenous mineral associations with variability of primary facial signs of deposits, regular position of mineral formations and ore concentrations in epigenetic mineralogo-geochemical zonation are referred to epigenetic criteria. The complex of epigenetic alterations accompanying mineralization is frequently used as a search sign of uranium deposit of a certain type

  6. Pore water colloid properties in argillaceous sedimentary rocks

    Energy Technology Data Exchange (ETDEWEB)

    Degueldre, Claude, E-mail: [Engineering Department, University of Lancaster, LA1 4YW Lancaster (United Kingdom); ChiAM & Institute of Environment, University of Geneva, 1211 Genève 4, Swizerland (Switzerland); Earlier, NES, Paul Scherrer Institute, 5232 Villigen (Switzerland); Cloet, Veerle [NAGRA, Hardstrasse 73, 5430 Wettingen (Switzerland)


    The focus of this work is to evaluate the colloid nature, concentration and size distribution in the pore water of Opalinus Clay and other sedimentary host rocks identified for a potential radioactive waste repository in Switzerland. Because colloids could not be measured in representative undisturbed porewater of these host rocks, predictive modelling based on data from field and laboratory studies is applied. This approach allowed estimating the nature, concentration and size distributions of the colloids in the pore water of these host rocks. As a result of field campaigns, groundwater colloid concentrations are investigated on the basis of their size distribution quantified experimentally using single particle counting techniques. The colloid properties are estimated considering data gained from analogue hydrogeochemical systems ranging from mylonite features in crystalline fissures to sedimentary formations. The colloid concentrations were analysed as a function of the alkaline and alkaline earth element concentrations. Laboratory batch results on clay colloid generation from compacted pellets in quasi-stagnant water are also reported. Experiments with colloids in batch containers indicate that the size distribution of a colloidal suspension evolves toward a common particle size distribution independently of initial conditions. The final suspension size distribution was found to be a function of the attachment factor of the colloids. Finally, calculations were performed using a novel colloid distribution model based on colloid generation, aggregation and sedimentation rates to predict under in-situ conditions what makes colloid concentrations and size distributions batch- or fracture-size dependent. The data presented so far are compared with the field and laboratory data. The colloid occurrence, stability and mobility have been evaluated for the water of the considered potential host rocks. In the pore water of the considered sedimentary host rocks, the clay

  7. Gravitational dislocations of sedimentary deposits in southern UkSSR

    Energy Technology Data Exchange (ETDEWEB)

    Belokrys, L S


    Characteristics of several types of dislocations are presented: pseudosynclines in Pontian deposits, and fracture dislocations; brachy-syncline subsidence folds; protrusion folds and their relics (easily diagnosed landslide faults). It is shown that two circumstances govern local folding and fracture faults in horizontally bedded sedimentary deposits in the southern Ukraine: 1) the alternation of competent and incompetent deposits in the fault, 2) the increasing unevenness of the static burden on the plastic layers as the erosion network grows. These faults are undoubtedly linked with geomorphological, not tectonic, elements.

  8. Induced polarization and electromagnetic field surveys of sedimentary uranium deposits

    International Nuclear Information System (INIS)

    Campbell, D.L.; Smith, B.D.


    Induced polarization (IP) and electromagnetic (EM) geophysical surveys were made over three areas of sedimentary uranium deposits in the western United States. The EM techniques were sometimes useful for investigating general structural settings, but not for finding uranium deposits per se. IP techniques were useful to help pinpoint zones of disseminated pyrite associated with the uranium deposits. In one case no clear differences were seen between the IP signatures of oxidized and reduced ground. Spectral (multi-frequency) IP showed no particular advantages over conventional IP for exploration applications. A sediment mineralization factor is introduced comparable to the ''metal factor'' used to detect porphyry copper mineralization. (author)

  9. Formation and preservation of greigite (Fe3S4) in a thick sediment layer from the central South Yellow Sea (United States)

    Liu, Jianxing; Mei, Xi; Shi, Xuefa; Liu, Qingsong; Liu, Yanguang; Ge, Shulan


    Sediments from continental shelves are sensitive to changes in both oceanic and terrestrial conditions, and, therefore, magnetic minerals in such sediments are affected strongly by depositional and diagenetic processes. Here, we investigated systematically an N-S transect of three sediment cores from the central South Yellow Sea (SYS) muddy area. Magnetic data indicate the presence of a horizontally distributed thick greigite-bearing layer. From an age model based on published magnetostratigraphy, accelerator mass spectrometry 14C dating ages, sedimentary characteristics and foraminiferal analysis, this layer was deposited within marine isotope stages (MIS) 17-13, following an enhanced sulphidic period over MIS 21-19 when the YS Warm Current and the associated YS Cold Water Mass were strong and where underlying sediments have higher total organic carbon, total sulphur and trace element molybdenum contents. Trace element cadmium enrichment in the greigite-bearing layers is documented for the first time, which indicates that weakly sulphidic (i.e. with trace levels of free H2S) conditions existed before greigite formed in a sulphidic environment during early diagenesis. It also indicates that subsequent conditions free of oxygen and H2S after greigite formation are more favourable for its preservation. We propose that organic matter supply was controlled over an extended period by moderate primary productivity. The combined effects of palaeoclimate and local tectonic subsidence were crucial for the formation and preservation of the identified greigite. In brief, our study improves understanding of the formation and preservation mechanisms of greigite in continental shelf sediments and reveals mid-Pleistocene palaeoenvironmental changes in the SYS.

  10. Mid-late Holocene changes in sedimentary organic matter on the inner shelf of the East China Sea (United States)

    Wu, Xiuning; Xing, Lei; Zhang, Ting; Xiang, Rong


    Marginal seas are important transitional zones for the delivery of terrestrial organic matter (TOM) from land to the open sea, and they play an important role in the carbon cycle. Tracing the source of sedimentary organic matter (SOM) deposited in marginal seas is fundamental to our understanding of the dispersal, degradation, migration, and conversion of organic matter. This paper presents high-resolution records of bulk organic matter and biomarker proxies from Core T08 that was recovered from the inner shelf of the East China Sea (ECS), and aims to identify the contributions of marine and terrestrial organic matter over the past 3725 yrs. Total organic carbon (TOC) values were low (0.50%) and showed no significant change between 3725 and 1800 yr BP (Period I), and increased continuously from 0.40% to 0.86% after 1800 yr BP (Period II: 1800-750 yr BP; Period III: 750 yr BP-present). The TMBR‧ (ratio of terrestrial to marine biomarkers) and δ13CTOC (δ13C of TOC) values showed steady TOM contribution during Period I and higher TOM contribution driven by the increased Changjiang River (CR)-derived TOM under strong East Asian Summer Monsoon (EASM) and El Niño during Period II. During Period III, the increase in marine organic matter (MOM) contribution was indicated by the TMBR‧, and this was caused by enhanced marine productivity related to intensified vertical mixture that was driven by the strengthened East Asian Winter Monsoon (EAWM). δ13CTOC shows a contrary trend to the TMBR‧ during Period III, probably influenced by variations in the C3 vegetation type during this period. Spectral analysis of the TMBR‧ series for the last 1200 yrs shows cycles with periods of 119, 75-85, and 54 yrs, confirming that climate-related events influenced the variation in SOM under the modulation of solar activity and solar irradiance at the centennial scale.

  11. Regional marine geophysical studies of the south western continental margin of India

    Digital Repository Service at National Institute of Oceanography (India)

    Rao, D.G.; Bhattacharya, G.C.; SubbaRaju, L.V.; Ramana, M.V.; Subrahmanyam, V.; KameshRaju, K.A.; Ramprasad, T.; Chaubey, A.K.

    and deepens towards south and is overlain by sedimentary sequence of maximum thickness of about 2.5 sec. of two way travel time. The Laccadive ridge system is characterised by a generally raised acoustic basement mantled by transparent sediments. Further...

  12. Static and dynamic through thickness lamina properties of thick laminates

    NARCIS (Netherlands)

    Lahuerta, F.; Nijssen, R.P.L.; Van der Meer, F.P.; Sluys, L.J.


    Thick laminates are increasingly present in large composites structures such as wind turbine blades. Different factors are suspected to be involved in the decreased static and dynamic performance of thick laminates. These include the effect of self-heating, the scaling effect, and the manufacturing

  13. Sedimentary facies and depositional history of the Swan Islands, Honduras (United States)

    Ivey, Marvin L.; Breyer, John A.; Britton, Joseph C.


    Swan Island is a Honduran possession in the western Caribbean, located on the southeastern side of the Cayman Trench. Two sedimentary assemblages are found on the island: an older bedded sequence of mid-Tertiary age (Aquitanian or Burdigalian) and a younger sedimentary sequence of Late Pleistocene age. The older sequence is composed of a series of calcarenites, calcilutites, and siliciclastic mudstones; capping these are cliff-forming reefal carbonates of the younger sequence. The rocks of the older bedded sequence accumulated in deep water. Sedimentation consisted of a constant rain of pyroclastic debris interrupted by the episodic introduction of upslope carbonate material by turbidity currents. Uplift and deformation of this sequence was initiated sometime after the Early Miocene. By the Late Pleistocene, uplift had brought the rocks into water depths conducive to coral growth. Pleistocene sedimentation on the island was controlled by the interaction between tectonic uplift and eustatic sea-level changes. The primary controlling force on the tectonic history of the island is its proximity to the boundary between the North American and Caribbean plates.

  14. Isolation of Geobacter species from diverse sedimentary environments (United States)

    Coaxes, J.D.; Phillips, E.J.P.; Lonergan, D.J.; Jenter, H.; Lovley, D.R.


    In an attempt to better understand the microorganisms responsible for Fe(III) reduction in sedimentary environments, Fe(III)-reducing microorganisms were enriched for and isolated from freshwater aquatic sediments, a pristine deep aquifer, and a petroleum-contaminated shallow aquifer. Enrichments were initiated with acetate or toluene as the electron donor and Fe(III) as the electron acceptor. Isolations were made with acetate or benzoate. Five new strains which could obtain energy for growth by dissimilatory Fe(III) reduction were isolated. All five isolates are gram- negative strict anaerobes which grow with acetate as the electron donor and Fe(III) as the electron acceptor. Analysis of the 16S rRNA sequence of the isolated organisms demonstrated that they all belonged to the genus Geobacter in the delta subdivision of the Proteobacteria. Unlike the type strain, Geobacter metallireducens, three of the five isolates could use H2 as an electron donor fur Fe(III) reduction. The deep subsurface isolate is the first Fe(III) reducer shown to completely oxidize lactate to carbon dioxide, while one of the freshwater sediment isolates is only the second Fe(III) reducer known that can oxidize toluene. The isolation of these organisms demonstrates that Geobacter species are widely distributed in a diversity of sedimentary environments in which Fe(III) reduction is an important process.

  15. Geochronology of La Tinta Upper Proterozoic sedimentary rocks, Argentina

    International Nuclear Information System (INIS)

    Cingolani, C.A.; Bonhomme, M.G.


    Olavarria-Sierras Bayas, Barker-San Manuel and Balcarce-Mar del Plata fine-grained sedimentary rocks from La Tinta Formation, the pre-Cenozoic cover of the Tandilia region, were studied using the Rb-Sr and K-Ar geochronology. The mineralogical study of the fine fraction has shown that only the Olavarria-Sierras Bayas area presents suitable material comprising typical sedimentary clays, affected only by diagenetic processes. Two Rb-Sr isochrons were obtained from Olavarria-Sierras Bayas rocks. They show: (1) an age of 769 +- 12 Ma with ( 87 Sr/ 86 Sr) 0 = 0.7121 +- 0.0005, for Aust Quarry rocks; and (2) an age of 723 +- 21 Ma with ( 87 Sr/ 86 Sr) 0 = 0.7171 +- 0.0012 for Cerro Negro and Losa Quarries rocks. Considering the above-mentioned isochron data and the mineralogy of the clays studied, the conclusion is drawn that the ages obtained reflect the isotopic setting of a late diagenetic process, dated back to nearly 720 Ma. K-Ar data also support the Rb-Sr isochrons and the late diagenetic clay origin. The lower section of La Tinta sequence in the Sierras Bayas area must then be considered as Upper Proterozoic in age. These new data support the recently reported stratigraphical divisions and ages. (Auth.)

  16. Optimum target thickness for polarimeters

    International Nuclear Information System (INIS)

    Sitnik, I.M.


    Polarimeters with thick targets are a tool to measure the proton polarization. But the question about the optimum target thickness is still the subject of discussion. An attempt to calculate the most common parameters concerning this problem, in a few GeV region, is made

  17. Marine Jurassic lithostratigraphy of Thailand (United States)

    Meesook, A.; Grant-Mackie, J. A.

    Marine Jurassic rocks of Thailand are well-exposed in the Mae Sot and Umphang areas and less extensively near Mae Hong Son, Kanchanaburi, Chumphon and Nakhon Si Thammarat, in the north, west, and south respectively. They are generally underlain unconformably by Triassic and overlain by Quaternary strata. Based mainly on five measured sections, fourteen new lithostratigraphic units are established: (in ascending order) Pa Lan, Mai Hung and Kong Mu Formations of the Huai Pong Group in the Mae Hong Son area; Khun Huai, Doi Yot and Pha De Formations of the Hua Fai Group in the Mae Sot area; Klo Tho, Ta Sue Kho, Pu Khloe Khi and Lu Kloc Tu Formations of the Umphang Group in the Umphang area; and the Khao Lak Formation in the Chumphon area. Mudstone, siltstone, sandstone, limestone and marl are the dominant lithologies. Mudstones, siltstones and sandstones are widespread; limestones are confined to the Mae Sot, Umphang, Kanchanaburi and Mae Hong Son areas; marls are found only in Mae Sot. The sequences are approximately 900 m thick in Mae Sot and 450 m thick in Umphang and are rather thinner in the other areas, particularly in the south. Based on ammonites, with additional data from bivalves and foraminifera, the marine Jurassic is largely Toarcian-Aalenian plus some Bajocian. Late Jurassic ages given previously for strata in the Mae Sot and Umphang areas have not been confirmed.

  18. The glacially overdeepened trough of the Salzach Valley, Austria: Bedrock geometry and sedimentary fill of a major Alpine subglacial basin (United States)

    Pomper, Johannes; Salcher, Bernhard C.; Eichkitz, Christoph; Prasicek, Günther; Lang, Andreas; Lindner, Martin; Götz, Joachim


    Overdeepened valleys are unambiguous features of glacially sculpted landscapes. They result from erosion at the bed of the glacier and their size and shape is determined by ice dynamics and the characteristics of the underlying bedrock. Major overdeepened valleys representing vertical bedrock erosion of several hundreds of meters are characteristic features of many trunk valleys in the formerly glaciated parts of the Alpine mountain belt. The thick sedimentary fill usually hinders attempts to unravel bedrock geometry, formation history and fill characteristics. Based on reflection seismic data and core-logs from multiple deep drillings we construct a detailed bedrock model of the Lower Salzach Valley trough, one of the largest overdeepened valleys in the European Alps. The analysed overdeepened structure characterized by a strongly undulating topography. Two reaches of enhanced erosion can be identified and are suggested to be related to variations in bedrock erodibility and a triple glacier confluence. The sedimentary fill shows clear characteristics of rapid infilling and subaqueous fan delta deposits indicate a strong influence of tributary streams. Associated surface lowering of the valley floor had a major impact on tributary stream incision but also on the available ice accumulation area at subsequent glaciations. The extent to which fills of earlier glaciations have been preserved from erosion during the last glacial maximum remains ambiguous and demands further exploration. To our knowledge the presented bedrock model is one of the best defined of any major overdeepened trunk valley.

  19. Cryogenic formation of brine and sedimentary mirabilite in submergent coastal lake basins, Canadian Arctic (United States)

    Grasby, Stephen E.; Rod Smith, I.; Bell, Trevor; Forbes, Donald L.


    Two informally named basins (Mirabilite Basins 1 and 2) along a submergent coastline on Banks Island, Canadian Arctic Archipelago, host up to 1 m-thick accumulations of mirabilite (Na2SO4·10H2O) underlying stratified water bodies with basal anoxic brines. Unlike isostatically uplifting coastlines that trap seawater in coastal basins, these basins formed from freshwater lakes that were transgressed by seawater. The depth of the sill that separates the basins from the sea is shallow (1.15 m), such that seasonal sea ice formation down to 1.6 m isolates the basins from open water exchange through the winter. Freezing of seawater excludes salts, generating dense brines that sink to the basin bottom. Progressive freezing increases salinity of residual brines to the point of mirabilite saturation, and as a result sedimentary deposits of mirabilite accumulate on the basin floors. Brine formation also leads to density stratification and bottom water anoxia. We propose a model whereby summer melt of the ice cover forms a temporary freshwater lens, and rather than mixing with the underlying brines, it is exchanged with seawater once the ice plug that separates the basins from the open sea melts. This permits progressive brine development and density stratification within the basins.

  20. Evaluation of Uranium depositional system in sedimentary rocks of Sibolga formation, Tapanuli Tengah

    International Nuclear Information System (INIS)

    I Gde Sukadana; Heri Syaeful


    Uranium in nature formed in various deposit type, depends on its sources, process, and depositional environments. Uranium occurrence in Sibolga, hosted in sedimentary rocks of Sibolga Formation, is properly potential to develop; nevertheless, the depositional pattern and uranium mineralization process so far had not been recognized. The research aim is to determine the rock distribution patterns and the existence of uranium grade anomalies based on surface geology and borehole log data. Mineralization occurrences from borehole log data distributed from basalt conglomerate unit (Kgl 1), sandstone 1 unit (Bp 1), conglomerate 2 unit (Kgl 2), and sandstone 2 unit (Bp 2) with their distribution and thickness are thinning to the top. Mineralization distribution in the eastern area, mainly on Kgl 1 unit, dominated by detritus materials from epi-genetic depositional in the form of monazite which is formed along with the formation of granite as its source rock. Meanwhile, mineralization on the upper rocks units formed a channel pattern trending northeast-southwest, which formed in syn-genetic process consist of uraninite, carnotite, and coffinite. Sibolga Formation deposition originated from east to west and uranium deposit formed because of the differences of depositional environment from oxidation in the east to the more reductive in the southwest. The increasing of organic materials in southwest basin caused the reduction condition of depositional environment. (author)

  1. Evolution of the Lian River coastal basin in response to Quaternary marine transgressions in Southeast China (United States)

    Tang, Yongjie; Zheng, Zhuo; Chen, Cong; Wang, Mengyuan; Chen, Bishan


    The coastal basin deposit in the Lian River plain is among the thickest Quaternary sequences along the southeastern coast of China. The clastic sediment accumulated in a variety of environmental settings including fluvial, channel, estuary/coastal and marine conditions. Detailed investigation of lithofacies, grain-size distributions, magnetic susceptibility, microfossils and chronology of marine core CN01, compared with regional cores, and combined with offshore seismic reflection profiles, has allowed us to correlate the spatial stratigraphy in the inner and outer plain and the seismic units. Grain size distribution analysis of core CN-01 through compositional data analysis and multivariate statistics were applied to clastic sedimentary facies and sedimentary cycles. Results show that these methods are able to derive a robust proxy information for the depositional environment of the Lian River plain. We have also been able to reconstruct deltaic evolution in response to marine transgressions. On the basis of dating results and chronostratigraphy, the estimated age of the onset of deposition in the Lian River coastal plain was more than 260 kyr BP. Three transgressive sedimentary cycles revealed in many regional cores support this age model. Detailed lithological and microfossil studies confirm that three marine (M3, M2 and M1) and three terrestrial (T3, T2 and T1) units can be distinguished. Spatial correlation between the inner plain, outer plain (typical cores characterized by marine transgression cycles) and offshore seismic reflectors reveals coherent sedimentary sequences. Two major boundaries (unconformity and erosion surfaces) can be recognized in the seismic profiles, and these correspond to weathered reddish and/or variegated clay in the study core, suggesting that Quaternary sediment changes on the Lian River plain were largely controlled by sea-level variations and coastline shift during glacial/interglacial cycles.

  2. The Fulong coastal area in northeast Taiwan: Late Holocene sedimentary phases including destruction and aggradation (United States)

    Boese, Margot; Luethgens, Christopher; Bauersachs, Marc


    Coastal areas are often subject to rapid morphological transformations owing to varying processes such as sea level changes, tectonic uplift, and geomorphological changes by catastrophic storm events, followed by phases of resilience. The study sites in northeast Taiwan at Fulong beach and adjacent areas, situated close to a nuclear power plant construction site, give evidence of an aggradational phase, a destructive phase, and resilience by a second aggradational phase. According to OSL data, a first aeolian accumulation started on top of marine and peri-marine/fluvial sediments at about 3 ka and lasted about 1500 years, interrupted by one palaeosoil. These data refer to an outcrop at a meander bluff at the southern bank of the Shuangsi river, not far from its present-day mouth. According to the morphological situation, this sand accumulation is only the remnant of a former greater dune system that has been eroded in its northern part. The former course of the Shuangsi and the location of its mouth are not known. The top of the outcrop is represented by two sand layers which are definitely younger than the lower sands as their deposition started about max. 630 years ago. The present-day dune system to the north of the river shows at least four dune ridges and the seaward aggradation is still continuing. The oldest dune ridge was sampled close to its top and dated to about 600 years ago (Dörschner et al. 2012). About 3 km upstream, a sedimentary sequence at the river bank has been studied, comprising a lower silty deposit with organic remnants and layered tree trunks at its top. This deposit is considered to be of marine origin, probably a peri-marine situation. This fine-grained sediment is covered by coarse fluvial gravels, indicating one or several catastrophic events in this morphological environment. Above the gravels, another fine-grained sediment related to flood events with low energy has been found. Radiocarbon analyses of organic material in both fine

  3. European coatings conference - Marine coatings. Proceedings

    Energy Technology Data Exchange (ETDEWEB)



    This volume contains 13 lectures (manuscripts or powerpoint foils) with the following topics: 1. Impact of containerization on polyurethane and polyurea in marine and protective coatings (Malte Homann); 2. The application of combinatorial/high-throughput methods to the development of marine coatings (Bret Chisholm); 3. Progress and perspectives in the AMBIO (advanced nanostructured surfaces for the control of biofouling) Project (James Callow); 4. Release behaviour due to shear and pull-off of silicone coatings with a thickness gradient (James G. Kohl); 5. New liquid rheology additives for high build marine coatings (Andreas Freytag); 6. Effective corrosion protection with polyaniline, polpyrrole and polythiophene as anticorrosice additives for marine paints (Carlos Aleman); 7. Potential applications of sol gel technology for marine applications (Robert Akid); 8: Performance of biocide-free Antifouling Coatings for leisure boats (Bernd Daehne); 9. Novel biocidefree nanostructured antifouling coatings - can nano do the job? (Corne Rentrop); 10. One component high solids, VOC compliant high durability finish technology (Adrian Andrews); 11. High solid coatings - the hybrid solution (Luca Prezzi); 12. Unique organofunctional silicone resins for environmentally friendly high-performance coatings (Dieter Heldmann); 13. Silicone-alkyd paints for marine applications: from battleship-grey to green (Thomas Easton).

  4. Study on investigation and evaluation methods of deep seated sedimentary rocks. Chemical weathering, pore water squeezing and relationships of physical properties of sedimentary rocks

    International Nuclear Information System (INIS)

    Oyama, Takahiro; Suzuki, Koichi


    Chemical weathering, porewater squeezing and physical properties for the sedimentary rocks were examined. Chemical weathering potential of rocks was described by the sulfur as a acceleration factor of weathering and carbonate contents as a neutralization factor of it. The carbonate contents in the rocks were measured accurately by the gas pressure measurement method. Pore water squeezing method was applied for the semi-hard sedimentary rocks (Opalinusclay). The chemical change of extracted pore water under high pressure conditions was estimated. Physical property of sedimentary rocks have relationship among the porosity and permeability and resistivity coefficient in the same rock types. It is possible to estimate the water permeability from the geophysical tests. (author)

  5. Using optical remote sensing model to estimate oil slick thickness based on satellite image

    International Nuclear Information System (INIS)

    Lu, Y C; Tian, Q J; Lyu, C G; Fu, W X; Han, W C


    An optical remote sensing model has been established based on two-beam interference theory to estimate marine oil slick thickness. Extinction coefficient and normalized reflectance of oil are two important parts in this model. Extinction coefficient is an important inherent optical property and will not vary with the background reflectance changed. Normalized reflectance can be used to eliminate the background differences between in situ measured spectra and remotely sensing image. Therefore, marine oil slick thickness and area can be estimated and mapped based on optical remotely sensing image and extinction coefficient

  6. Sedimentary architecture and depositional controls of a Pliocene river-dominated delta in the semi-isolated Dacian Basin, Black Sea

    NARCIS (Netherlands)

    Jorissen, Elisabeth L.; de Leeuw, A.; van Baak, Christiaan G.C.; Mandic, Oleg; Stoica, Marius; Abels, Hemmo A.; Krijgsman, Wout

    Sedimentological facies models for (semi-)isolated basins are less well developed than those for marine environments, but are critical for our understanding of both present-day and ancient deltaic sediment records in restricted depositional environments. This study considers an 835 m thick

  7. Heterogeneous carbonaceous matter in sedimentary rock lithocomponents causes significant trichloroethylene (TCE) sorption in a low organic carbon content aquifer/aquitard system. (United States)

    Choung, Sungwook; Zimmerman, Lisa R; Allen-King, Richelle M; Ligouis, Bertrand; Feenstra, Stanley


    This study evaluated the effects of heterogeneous thermally altered carbonaceous matter (CM) on trichloroethylene (TCE) sorption for a low fraction organic carbon content (foc) alluvial sedimentary aquifer and aquitard system (foc=0.046-0.105%). The equilibrium TCE sorption isotherms were highly nonlinear with Freundlich exponents of 0.46-0.58. Kerogen+black carbon was the dominant CM fraction extracted from the sediments and accounted for >60% and 99% of the total in the sands and silt, respectively. Organic petrological examination determined that the kerogen included abundant amorphous organic matter (bituminite), likely of marine origin. The dark calcareous siltstone exhibited the greatest TCE sorption among aquifer lithocomponents and accounted for most sorption in the aquifer. The results suggest that the source of the thermally altered CM, which causes nonlinear sorption, was derived from parent Paleozoic marine carbonate rocks that outcrop throughout much of New York State. A synthetic aquifer-aquitard unit system (10% aquitard) was used to illustrate the effect of the observed nonlinear sorption on mass storage potential at equilibrium. The calculation showed that >80% of TCE mass contained in the aquifer was sorbed on the aquifer sediment at aqueous concentration TCE groundwater plume in the aquifer studied. It is implied that sorption may similarly contribute to TCE persistence in other glacial alluvial aquifers with similar geologic characteristics, i.e., comprised of sedimentary rock lithocomponents that contain thermally altered CM. Copyright © 2014 Elsevier B.V. All rights reserved.


    Directory of Open Access Journals (Sweden)



    Full Text Available The detailed sedimentary and micropalaeontological analysis of a complex association of continental to marginal-marine deposits from the Oxfordian of Portugal (Cabaços Formation has allowed the recognition of high-frequency, subtle changes in the environmental conditions. The main factors controlling the palaeobiological responses to such minor-scale fluctuations were also identified. Two factors have shown to be especially significant: subaerial exposure duration and frequency (estimated by assigning type of features to the exposure index and salinity trends, as suggested by the sedimentary and fossil records. In the west of the basin, salinity fluctuations were much stronger and more frequent (fresh- brackish-restricted marine-hypersaline, and subaerial exposure more marked for longer periods, than in the east of the basin. The microfossil assemblages, as a whole, but in particular the ostracod faunas, show differences in abundance, diversity, dominant species, degree of intrageneric and intraspecific variations, both along the successions and between west and east. The western populations seem to have been much less stable, which suggests that high-frequency changes in salinity (more than its absolute values and degree of exposure were the most important controls on the palaeobiota. PDF

  9. Mineralogical and geochemical characteristics of Miocene pelitic sedimentary rocks from the south-western part of the Pannonian Basin System (Croatia: Implications for provenance studies

    Directory of Open Access Journals (Sweden)

    Anita Grizelj


    Full Text Available Fifty-two samples of Miocene pelitic sedimentary rock from outcrops on Medvednica, Moslavačka Gora and Psunj Mts., and boreholes in the Sava Depression and the Požega Sub-depression were investigated. These sediments formed in different marine (with normal and reduced salinity, brackish, and freshwater environments, depending on the development stage of the Pannonian Basin System. Carbonate minerals, clay minerals and quartz are the main constituents of all pelitic sedimentary rocks, except in those from Moslavačka Gora Mt in which carbonate minerals are not present. Feldspars, pyrite, opal-CT, and hematite are present as minor constituents in some rocks. Besides calcite, dependent on the sedimentary environment and diagenetic changes, high-magnesium calcite, aragonite, dolomite and ankerite/Ca-dolomite are also present. Smectite or illite-smectite is the main clay minerals in the samples. Minor constituents, present in almost all samples, are detrital illite and kaolinite. In some samples chlorite is also present in a low amount. Major elements, trace elements and rare earth elements patterns used in provenance analysis show that all analysed samples have a composition similar to the values of the upper continental crust (UCC. The contents of major and trace elements as well as SiO2/Al2O3, K2O/Al2O3, Na2O/K2O, Eu/Eu*, La/Sc, Th/Sc, La/Co Th/Co, Th/Cr, Ce/Ce* and LREE/HREE ratios, show that the analysed pelitic sedimentary rocks were formed by weathering of different types of mostly acidic (silicic, i.e. felsic rocks.

  10. Sedimentary Markers : a window into deep geodynamic processes Examples from the Western Mediterranean Sea (United States)

    Rabineau, Marina; Aslanian, Daniel; Leroux, Estelle; Pellen, Romain; Gorini, Christian; Moulin, Maryline; Droz, Laurence; Bache, Francois; Molliex, Stephane; Silenzario, Carmine; Rubino, Jean-Loup


    Deep Earth dynamics impact so strongly on surface geological processes that we can use sediment palaeo-markers as a window into the deeper Earth. Derived from climatic and tectonic erosive actions on the continents, and related to eustasy, subsidence and isostasy, the sediment in a deep basin is the main recorder of these processes. Nevertheless, defining and quantifying the relative roles of parameters that interact to give the final sedimentary architecture is not a simple task. Using a 3D-grid of seismic and wide-angle data, boreholes and numerical stratigraphic modelling, we propose here a quantification of post-rift vertical movements in the Provençal Basin (Western Mediterranean) involving three domains of subsidence: seaward tilting on the platform and the slope and purely vertical subsidence in the deep basin (Rabineau et al., 2014 ; Leroux et al., 2015). These domains fit the deeper crustal domains highlighted by previous geophysical data (Moulin et al., 2015 ; Afilhado et al., 2015). Post-break-up sedimentary markers may therefore be used to identify the initial hinge lines of the rifting phase, to quantify sedimentation rates and isostatic rebound (Rabineau et al., 2014) and redefine the subsidence laws. Similar work and results are obtained in the Valencia Basin (Pellen et al., 2016). This Western Mediterranean Sea is a natural laboratory with very high total subsidence rates that enable high sedimentation rates along the margin with sediments provided by the Rhône and Ebro rivers flowing from the Alps, the Pyrennees and Catalan chains, which in turn archives the detailed record of climate/tectonic evolution during the Neogene. The Western Mediterranean Sea could therefore further probe deep-earth and surface connections using deep drillings of this land-locked ocean basin transformed into a giant saline basin (Rabineau et al., 2015). Leroux, E., Aslanian, D., Rabineau, M., M. Moulin, D. Granjeon, C. Gorini, L. Droz, 2015. Sedimentary markers: a

  11. The anthropogenic change of sedimentary system recored to short core in brackish Lake Ogawara, North Japan (United States)

    Nagashima, A.; Seto, K.; yamada, K.; Yonenobu, H.


    The sedimentary environment of brackish lake is fluctuated by the effect of sediment flux from rivers, tidal, climate change, and human activities. Each brackish lake has a specific character. The Lake Ogawara is located in east part of Aomori Prefecture, is connected to the Pacific Ocean through Takase River. In this study, we performed the investigation in the Lake Ogawara at 2011, to clarify a characteristic of recent sedimentary environments. In addition, the short coring at 2012 is performed to show a changes of sedimentary environments. The investigation is made up of 110 detailed sampling localities in grid and 100 water quality measurement sites in a traverse line through the lake system. In addition, the short cores were sampled at sites of Og20, 33, 64, 84, 95 and 97. The water column of Lake Ogawara divided into 3 water masses, as an epilimnion (0-10m), a metalimnion (10-18m), and a hypolimnion (deeper than 18m). The environments in metalimnion and hypolimnion show the anoxic to euxinic condition. The upper part of the metalimnion shows pycnocline dependent on water temperature and salinity, and the lower part shows pycnocline dependent on mainly salinity. Surface sediments are observed well-sorted sand shallower than 10m, and black organic mud with lamination deeper than it depth. As a result of CNS element anaysis of surface sediments, the total organic carbon (TOC) contens increase toward deep, and show very high value (around 8%) in metalimnion and hypolimnion. Total sulfur (TS) content shows 1-2% of values deeper than metalimnion. In spite of euxinic condition, TOC/TS ratio is high in comparison with the normal marine. This suggests the exhaustion of metal ions such as iron or undersupply of sulfate ion. In Og84, 97 cores, the upper part shows the black (L*=6). But lower part shows relative high lightness (L*=15 to 20). The mean grain size of the upper part (black layer) is 6.5φ, the lower part shows the 8.0φ. TOC contents shows the around 7% in

  12. Marine animal stings or bites (United States)

    Stings - marine animals; Bites - marine animals ... Things you can do to prevent a marine animal sting or bite include: Swim near a lifeguard. Observe posted signs that may warn of danger from jellyfish or other hazardous marine life. ...

  13. Electromagnetic exploration in high-salinity groundwater zones: case studies from volcanic and soft sedimentary sites in coastal Japan (United States)

    Suzuki, Koichi; Kusano, Yukiko; Ochi, Ryota; Nishiyama, Nariaki; Tokunaga, Tomochika; Tanaka, Kazuhiro


    Estimating the spatial distribution of groundwater salinity in coastal plain regions is becoming increasingly important for site characterisation and the prediction of hydrogeological environmental conditions resulting from radioactive waste disposal and underground CO2 storage. In previous studies of the freshwater-saltwater interface, electromagnetic methods were used for sites characterised by unconsolidated deposits or Neocene soft sedimentary rocks. However, investigating the freshwater-saltwater interface in hard rock sites (e.g. igneous areas) is more complex, with the permeability of the rocks greatly influenced by fractures. In this study, we investigated the distribution of high-salinity groundwater at two volcanic rock sites and one sedimentary rock site, each characterised by different hydrogeological features. Our investigations included (1) applying the controlled source audio-frequency magnetotelluric (CSAMT) method and (2) conducting laboratory tests to measure the electrical properties of rock core samples. We interpreted the 2D resistivity sections by referring to previous data on geology and geochemistry of groundwater. At the Tokusa site, an area of inland volcanic rocks, low resistivity zones were detected along a fault running through volcanic rocks and shallow sediments. The results suggest that fluids rise through the Tokusa-Jifuku Fault to penetrate shallow sediments in a direction parallel to the river, and some fluids are diluted by rainwater. At the Oki site, a volcanic island on a continental shelf, four resistivity zones (in upward succession: low, high, low and high) were detected. The results suggest that these four zones were formed during a transgression-regression cycle caused by the last glacial period. At the Saijo site, located on a coastal plain composed of thick sediments, we observed a deep low resistivity zone, indicative of fossil seawater remnant from a transgression after the last glacial period. The current coastal

  14. Mariners Weather Log (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Mariners Weather Log (MWL) is a publication containing articles, news and information about marine weather events and phenomena, worldwide environmental impact...

  15. (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — is a marine information system that provides authoritative ocean data, offshore planning tools, and technical support to the offshore renewable...

  16. Marine Jurisdiction Boundaries (United States)

    Department of Homeland Security — The NOAA Coastal Services Center's Marine Jurisdiction dataset was created to assist in marine spatial planning and offshore alternative energy sitting. This is a...

  17. Tsunamis and marine life

    Digital Repository Service at National Institute of Oceanography (India)

    Rao, D.V.S.; Ingole, B.S.; Tang, D.; Satyanarayan, B.; Zhao, H.

    The 26 December 2004 tsunami in the Indian Ocean exerted far reaching temporal and spatial impacts on marine biota. Our synthesis was based on satellite data acquired by the Laboratory for Tropical Marine Environmental Dynamics (LED) of the South...

  18. Supermarket Marine Biology. (United States)

    Colby, Jennifer A.; And Others


    Describes a survey used to determine the availability of intact marine vertebrates and live invertebrates in supermarkets. Results shows that local supermarkets frequently provide a variety of intact marine organisms suitable for demonstrations, experiments, or dissections. (ZWH)

  19. Structural Acoustic UXO Detection and Identification in Marine Environments (United States)


    a thick steel wall, is cylindrical, and has an aspect ratio of about 5:1. Further, the interior water can support acoustic waves as does the epoxy...FINAL REPORT Structural Acoustic UXO Detection and Identification in Marine Environments SERDP Project MR-2103 MAY 2016 B. H...NUMBER Structural Acoustic UXO Detection and Identification in Marine Environments- Final report for Follow-on Work- MR-2103 Sb. GRANT NUMBER Sc

  20. Riverine Carbon and the Sedimentary Record on the Continental Shelves (United States)


    Geologia Marina (formerly Istituto di Geologia Marina) Consiglio Nazionale delle Ricerche Via Gobetti, 101 40129 Bologna, Italy phone: +39 (051...ORGANIZATION NAME(S) AND ADDRESS(ES) Istituto Scienze Marine, Sezione Geologia Marina,(formerly Istituto di Geologia Marina),Consiglio Nazionale delle

  1. Seashore marine table quiz


    Institute, Marine


    Develop an increasing awareness of plants and animals that live in local marine environments including the seashore, seas and oceans of Ireland. After learning all about the seashore and other marine related lessons, this quiz can be used to evaluate the student’s knowledge of the marine related living things and natural environments. The table quiz can be used as a guide, highlighting facts about the marine environment and some of the animals that live there.

  2. Carotenoids in Marine Animals


    Maoka, Takashi


    Marine animals contain various carotenoids that show structural diversity. These marine animals accumulate carotenoids from foods such as algae and other animals and modify them through metabolic reactions. Many of the carotenoids present in marine animals are metabolites of β-carotene, fucoxanthin, peridinin, diatoxanthin, alloxanthin, and astaxanthin, etc. Carotenoids found in these animals provide the food chain as well as metabolic pathways. In the present review, I will describe marine a...

  3. Sedimentary Evolution of Marginal Ganga Foreland Basin during the Late Pleistocene (United States)

    Ghosh, R.; Srivastava, P.; Shukla, U. K.


    Ganga foreland basin, an asymmetrical basin, was formed as result of plate-plate collision during middle Miocene. A major thrust event occurred during 500 ka when upper Siwalik sediments were uplifted and the modern Ganga foreland basin shifted towards craton, making a more wide and deep basin. The more distal part of this basin, south of axial river Yamuna, records fluvial sedimentary packages that helps to understand dynamics of peripheral bulge during the late Quaternary. Sedimentary architecture in conjunction with chemical index of alteration (CIA), paleocurrent direction and optically stimulated dating (OSL) from 19 stratigraphic sections helped reconstructing the variations in depositional environments vis-à-vis climate change and peripheral bulge tectonics. Three major units (i) paleosol; (ii) cratonic gravel; (iii) interfluve succession were identified. The lower unit-I showing CIA values close to 70-80 and micro-morphological features of moderately well-developed pedogenic unit that shows development of calcrete, rhizoliths, and mineralized organic matter in abundance. This is a regional paleosols unit and OSL age bracketed 200 ka. This is unconformably overlain by unit-II, a channelized gravel composed of sub-angular to sub-rounded clasts of granite, quartz, quartzite, limestone and calcrete. The gravel have low CIA value up to 55, rich in vertebrate fossil assemblages and mean paleocurrent vector direction is NE, which suggesting deposition by a fan of a river draining craton into foreland. This unit is dated between 100 ka and 54 ka. The top unit-III, interfluve succession of 10-15 m thick is composed of dark and light bands of sheet like deposit of silty clay to clayey silt comprises sand lenses of red to grey color and displaying top most OSL age is 12 ka. The basal mature paleosol signifies a humid climate developed under low subsidence rate at >100 ka. After a hiatus represented by pedogenic surface deposition of unit-II (gravel) suggests uplift

  4. Application of MSS/LANDSAT images to the structural study of recent sedimentary areas: Campos Sedimentary Basin, Rio de Janeiro, Brazil (United States)

    Parada, N. D. J. (Principal Investigator); Barbosa, M. P.


    Visual and computer aided interpretation of MSS/LANDSAT data identified linear and circular features which represent the ""reflexes'' of the crystalline basement structures in the Cenozoic sediments of the emergent part of the Campos Sedimentary Basin.

  5. Physicomechanical parameters of sedimentary rocks in eastern Sichuan, China

    International Nuclear Information System (INIS)

    Guo, Jian; Sun, Yan; Shu, Liangshu; Zhu, Wenbin; Wang, Feng; Li, Benliang; Liu, Deliang


    Rock samples were collected and selected from the sedimentary covering strata from Cambrian to Jurassic in eastern Sichuan, China, which belongs to the Upper Yangtze plate. Physicomechanical parameters were measured systematically. Based on parametric texture characteristics and observation data of geology, five regional layer-slip systems are derived. The five layer-slip systems correspond to five reservoir–cover systems, as the incompetent beds correspond to cover beds and the competent beds to reservoir beds. In comparison with the Middle and Lower Yangtze plates, the physicomechanical parameters, lithologic composition and structural characteristics are basically similar to the Upper Yangtze plate. This comparison offers some insight into the oil and gas reservoir–cover systems in the region

  6. Stability of IRSL signals from sedimentary K-feldspar samples

    DEFF Research Database (Denmark)

    Thomsen, Kristina Jørkov; Murray, A.S.; Jain, Mayank


    for potassium-rich sedimentary feldspars. We show that the natural post-IR IRSL (pIRIR) signal from a 3.6 Ma old sample is in apparent saturation on a laboratory generated dose response curve, i.e. it does not show detectable fading in nature although a low fading rate is observed on laboratory time scales. We...... be explained in terms of either a single- or multiple-trap model. We present evidence that may suggest that at least part of pIRIR signal is derived from a high temperature trap (∼550°C thermoluminescence (TL) peak), although again the data can also be explained in terms of a single-trap model. Finally, we...

  7. Prediction of thermal conductivity of sedimentary rocks from well logs

    DEFF Research Database (Denmark)

    Fuchs, Sven; Förster, Andrea


    The calculation of heat-flow density in boreholes requires reliable values for the change of temperature and rock thermal conductivity with depth. As rock samples for laboratory measurements of thermal conductivity (TC) are usually rare geophysical well logs are used alternatively to determine TC...... parameters (i.e. thermal conductivity, density, hydrogen index, sonic interval transit time, gamma-ray response, photoelectric factor) of artificial mineral assemblages consisting 15 rock-forming minerals that are used in different combinations to typify sedimentary rocks. The predictive capacity of the new...... equations is evaluated on subsurface data from four boreholes drilled into the Mesozoic sequence of the North German Basin, including more than 1700 laboratory-measured thermal-conductivity values. Results are compared with those from other approaches published in the past. The new approach predicts TC...

  8. Marine Education Knowledge Inventory. (United States)

    Hounshell, Paul B.; Hampton, Carolyn

    This 35-item, multiple-choice Marine Education Knowledge Inventory was developed for use in upper elementary/middle schools to measure a student's knowledge of marine science. Content of test items is drawn from oceanography, ecology, earth science, navigation, and the biological sciences (focusing on marine animals). Steps in the construction of…

  9. Marine polar steroids

    International Nuclear Information System (INIS)

    Stonik, Valentin A


    Structures, taxonomic distribution and biological activities of polar steroids isolated from various marine organisms over the last 8-10 years are considered. The peculiarities of steroid biogenesis in the marine biota and their possible biological functions are discussed. Syntheses of some highly active marine polar steroids are described. The bibliography includes 254 references.

  10. The sedimentary record of dinoflagellate cysts: looking back into the future of phytoplankton blooms

    Directory of Open Access Journals (Sweden)

    Barrie Dale


    Full Text Available Marine systems are not as well understood as terrestrial systems, and there is still a great need for more primary observations, in the tradition of the old-time naturalists, before newer methods such as molecular genetics and modeling can be fully utilized. The scientific process whereby the smaller, detailed building blocks of observation are ultimately linked towards better understanding natural systems is illustrated from my own career experience, especially with regard to the dinoflagellates and plankton blooms. Some dinoflagellates produce a fossilizable resting stage (cyst in their life cycle, and dinoflagellate cysts have become one of the most important groups of microfossils used in geological exploration (e.g. oil and gas. This has stimulated both paleontological and biological research producing detailed building blocks of information, currently scattered throughout the respective literature. Here, I attempt to bring together the present day perspective, from biology, with the past, from paleontology, as the most comprehensive basis for future work on the group. This shows the cysts to be the critical link needed for focusing future molecular genetics studies towards a more verifiable view of evolutionary pathways, and it also suggests new integrated methods for studying past, present, and future blooms. The large, rapidly growing field of harmful algal bloom studies is producing many different building blocks, but plankton blooms as episodic phenomena are still poorly understood. This is largely due to the general lack of long-term datasets allowing identification of the changing environmental factors that permit certain species to bloom at unpredictable intervals of time. Cysts in sediments are useful environmental indicators today, e.g. reflecting aspects of climate and pollution, and provide information directly relevant to some dinoflagellate blooms. They therefore may be used for obtaining retrospective information from the

  11. Corneal thickness: measurement and implications. (United States)

    Ehlers, Niels; Hjortdal, Jesper


    The thickness of the cornea was reported in more than 100-year-old textbooks on physiological optics (Helmholtz, Gullstrand). Physiological interest was revived in the 1950s by David Maurice, and over the next 50 years, this 'simple' biological parameter has been studied extensively. Several techniques for its measurement have been described and physiological and clinical significance have been studied. In this review, the different methods and techniques of measurement are briefly presented (optical, ultrasound). While the corneal thickness of many animals are the same over a considerable part of the surface, in the human cornea anterior and posterior curvature are not concentric giving rise to a problem of definition. Based on this the precision and accuracy of determining the central corneal thickness are discussed. Changes in corneal thickness reflects changes in function of the boundary layers, in particular the endothelial barrier. The absolute value of thickness is of importance for the estimation of IOP but also in diagnosis of corneal and systemic disorders. Finally it is discussed to what extent the thickness is a biometric parameter of significance, e.g. in the progression of myopia or in the development of retinal detachment.

  12. Stratigraphy and age estimate of Neogene shallow marine fossiliferous deposits in Brunei Darussalam (Ambug Hill, Tutong district) (United States)

    Kocsis, László; Briguglio, Antonino; Roslim, Amajida; Razak, Hazirah; Ćorić, Stjepan; Frijia, Gianluca


    The Ambug Hill in Brunei is an exceptional geological site where a series of siliciclastic rocks crops out with some layers extremely rich in marine fossils. Such fossiliferous outcrops are extremely rare in the northern part of Borneo and their description is of primary importance as their fossil content can be used to correlate the regional depositional sequences with global biostratigraphic zonations. In this work we present for the first time a detailed sedimentary profile completed with Sr-isotopes and biostratigraphic dating. The succession is divided into four sedimentary units. The first unit comprises bioturbated sandstone followed by a second unit of clay-silt rich levels whose first 9.5 m contain rich marine fossil assemblages. Calcareous nannoplankton data indicate a Late Tortonian - Early Messinian (NN11) age, which is confirmed by Sr-isotope dating derived from bivalves giving a numerical age range from 8.3 to 6.2 My. After a major emersion surface, the third sedimentary unit of sand- and siltstone lacks suitable fossils for bio- and isotope stratigraphy. The age of emersion and the related sedimentary gap can be either correlated with the Me1 (7.25 My) or the Me2 (5.73 My) sequence boundary. A fourth, thin sedimentary unit is recognized on the top of the profile with silt- and claystone beds without age diagnostic remains and calcareous fossils.

  13. The Sedimentary History of Southern Central Crete: Implications for Neogene Uplift (United States)

    Kröger, K.; Brachert, T. C.; Reuter, M.


    The tectonic setting of Crete was largely extensional since Lower Miocene uplift and exhumation of HP/LT rocks. Erosion of uplifted areas resulted in the deposition of terrestrial to marine sediments in the Messara and Iraclion Basins. There are several concurring models that discuss Late Neogene uplift of the basinal margins. Neogene near shore sediments in the south of the Messara Basin record fault movements contemporaneous to sedimentation and sedimentary input from the hinterland. Therefore they provide information on the paleogeographic situation and the resulting amount of subsidence and uplift of mountain areas since the Upper Miocene. The studied sediments consist of terrestrial to shallow marine, floodplain related sediments of the Upper Miocene Ambelouzos Formation that are overlain by platform limestones of the Upper Miocene Varvara Formation. In the Messara Basin these units are overlain by the Pliocene Kourtes Formation. The stratigraphic architecture of these deposits indicates fragmentation of the basinal margin. Proximal boulder conglomerates and reworked blocks of the Ambelouzos formation indicate fault activity during the deposition of the Varvara Formation. Contents of terrigenous clastics, provided by rivers and distributed by longshore currents, are high in the Ambelouzos and the lower Varvara Formations but decrease rapidly upsection within the Varvara Formation. This indicates drowning of the fault bounded blocks and little topography of the hinterland (Asteroussia Mountains) at that time. The Pliocene marls at the southern margin of the Messara Basin contain lithoclasts of the Upper Miocene limestones and thus indicate uplift of the carbonate platform. The modern topographic elevation of formerly drowned fault bounded blocks requires a minimum uplift of 400m. Main uplift occurred at approximately orthogonal NW-SE and SW-NE striking normal to oblique faults. The present elevation of the Asteroussia Mountains indicates net uplift of at least

  14. Eutrophication signals in the sedimentary record of dinoflagellate cysts in coastal waters (United States)

    Dale, Barrie


    A brief review is presented of the current status of eutrophication signals from the sedimentary records of dinoflagellate cysts in coastal waters, particularly of NW Europe. There is a dearth of the multi-decadal time series data from plankton needed to document eutrophication, and the cysts may provide an alternative source of information. Two different eutrophication signals have been described so far from cyst records: 1) from the Oslofjord, comprising a marked increase in total cyst concentrations (interpreted as probably reflecting increased phytoplankton productivity), with Lingulodinium polyedrum cysts accounting for most of the increase (interpreted as a species particularly benefiting from added nutrients from cultural eutrophication in late summer when nutrients otherwise may be limiting); and 2) the heterotroph signal, from several other Norwegian fjords and Tokyo Bay, Japan, involving both cases of increased cyst concentrations and others with no particular increase, but with a marked proportional increase in cysts of heterotrophic species (interpreted as reflecting increased diatoms and possibly other prey for the heterotrophic dinoflagellates and/or more unfavourable conditions for autotrophs, e.g. from shading). These signals should be used critically, and there is a particular need to distinguish between eutrophication signals and climate signals that may be co-occurring at a given time. Work by various authors has generally supported the concept of these cyst-based signals since they were first published, including both further records from cored sediments from other parts of the world and studies relating cyst distributions in surface sediments to gradients of pollution and nutrients from sewage discharge. Recent, unpublished work by Dale and Sætre, linked cyst signals in cored sediments to the timing of collapse of local fisheries at different times within the past fifty years in four fjord systems along the Norwegian Skagerrak coast

  15. The sedimentary dynamics in natural and human-influenced delta channel belts

    NARCIS (Netherlands)

    Hobo, N.


    This study investigates the increased anthropogenic influence on the within-channel belt sedimentary dynamics in the Rhine delta. To make this investigation, the sedimentary dynamics within the life-cycle of a single channel belt were reconstructed for three key periods of increasing human impact,

  16. Potentiality if Rb-Sr method for dating the argillous sedimentary rocks

    International Nuclear Information System (INIS)

    Thomaz Filho, A.


    The potentiality of application Rb-Sr method in argillous sediments, using samples from paleozoic and mesozoic formation in brazilian sedimentaries basin was tested. Physical, chemistry and isotopic analysis of thirty eight samples were made in the laboratories of geochronology Research Center from the University of Sao Paulo. Four isochronic diagrams for the argillous sedimentary rocks were also proposed. (author)

  17. Age and sedimentary record of inland eolian sediments in Lithuania, NE European Sand Belt

    DEFF Research Database (Denmark)

    Kalińska-Nartiša, Edyta; Thiel, Christine; Nartišs, Maris


    in any detail. The sedimentary structural-textural features are investigated and a chronology was derived using optically stimulated luminescence on both quartz and feldspar. The sedimentary structures and the rounding and surface characteristics of the quartz grains argue for a predominance of eolian...

  18. Study on evaluation method for heterogeneous sedimentary rocks based on forward model

    International Nuclear Information System (INIS)

    Masui, Yasuhiro; Kawada, Koji; Katoh, Arata; Tsuji, Takashi; Suwabe, Mizue


    It is very important to estimate the facies distribution of heterogeneous sedimentary rocks for geological disposal of high level radioactive waste. The heterogeneousness of sedimentary rocks is due to variable distribution of grain size and mineral composition. The objective of this study is to establish the evaluation method for heterogeneous sedimentary rocks based on forward model. This study consisted of geological study for Horonobe area and the development of soft wear for sedimentary model. Geological study was composed of following items. 1. The sedimentary system for Koetoi and Wakkanai formations in Horonobe area was compiled based on papers. 2. The cores of HDB-1 were observed mainly from sedimentological view. 3. The facies and compaction property of argillaceous rocks were studied based on physical logs and core analysis data of wells. 4. The structure maps, isochrone maps, isopach maps and restored geological sections were made. The soft wear for sedimentary model to show sedimentary system on a basin scale was developed. This soft wear estimates the facies distribution and hydraulic conductivity of sedimentary rocks on three dimensions scale by numerical simulation. (author)

  19. Late Holocene sedimentary changes in floodplain and shelf environments of the Tagus River (Portugal)

    NARCIS (Netherlands)

    Vis, G.J.; Kasse, C.; Kroon, D.; Jung, S.J.A.; Zuur, H.; Prick, A.C.H.


    Sedimentary changes during the last ∼2500 years have been reconstructed from cored sedimentary records from the deltaic floodplain of the Lower Tagus Valley and the Tagus mudbelt on the continental shelf offshore Lisbon. We used a multi-proxy approach consisting of sedimentology, grainsize, pollen

  20. A first report on a bloom of the marine prymnesiophycean, Phaeocystis globosa from the Arabian Sea

    Digital Repository Service at National Institute of Oceanography (India)

    Madhupratap, M.; Sawant, S.S.; Gauns, M.

    A thick bloom of the marine prymnesiophycean, Phaeocystis globosa was observed in the central Arabian Sea during the summer monsoon period (July-August, 1996). The cells were mostly in colonial form, embedded in gelatinous matrics. The cell diameter...

  1. Sedimentary architecture of a Plio-Pleistocene proto-back-arc basin: Wanganui Basin, New Zealand (United States)

    Proust, Jean-Noël; Lamarche, Geoffroy; Nodder, Scott; Kamp, Peter J. J.


    The sedimentary architecture of active margin basins, including back-arc basins, is known only from a few end-members that barely illustrate the natural diversity of such basins. Documenting more of these basins types is the key to refining our understanding of the tectonic evolution of continental margins. This paper documents the sedimentary architecture of an incipient back-arc basin 200 km behind the active Hikurangi subduction margin, North Island, New Zealand. The Wanganui Basin (WB) is a rapidly subsiding, Plio-Pleistocene sedimentary basin located at the southern termination of the extensional back-arc basin of the active Central Volcanic Region (TVZ). The WB is asymmetric with a steep, thrust-faulted, outer (arc-ward) margin and a gentle inner (craton-ward) margin. It contains a 4-km-thick succession of Plio-Pleistocene sediments, mostly lying offshore, composed of shelf platform sediments. It lacks the late molasse-like deposits derived from erosion of a subaerial volcanic arc and basement observed in classical back-arc basins. Detailed seismic stratigraphic interpretations from an extensive offshore seismic reflection data grid show that the sediment fill comprises two basin-scale mega-sequences: (1) a Pliocene (3.8 to 1.35 Ma), sub-parallel, regressive "pre-growth" sequence that overtops the uplifted craton-ward margin above the reverse Taranaki Fault, and (2) a Pleistocene (1.35 Ma to present), divergent, transgressive, "syn-growth" sequence that onlaps: (i) the craton-ward high to the west, and (ii) uplifted basement blocks associated with the high-angle reverse faults of the arc-ward margin to the east. Along strike, the sediments offlap first progressively southward (mega-sequence 1) and then southeastward (mega-sequence 2), with sediment transport funnelled between the craton- and arc-ward highs, towards the Hikurangi Trough through the Cook Strait. The change in offlap direction corresponds to the onset of arc-ward thrust faulting and the rise of

  2. Marine nitrogen cycle

    Digital Repository Service at National Institute of Oceanography (India)

    Naqvi, S.W.A.

    ) such as the Marine nitrogen cycle The marine nitrogen cycle. ‘X’ and ‘Y’ are intra-cellular intermediates that do not accumulate in water column. (Source: Codispoti et al., 2001) Page 1 of 3Marine nitrogen cycle - Encyclopedia of Earth 11/20/2006http://www... and nitrous oxide budgets: Moving targets as we enter the anthropocene?, Sci. Mar., 65, 85-105, 2001. Page 2 of 3Marine nitrogen cycle - Encyclopedia of Earth 11/20/2006 square6 Gruber, N.: The dynamics...

  3. Carotenoids in Marine Animals (United States)

    Maoka, Takashi


    Marine animals contain various carotenoids that show structural diversity. These marine animals accumulate carotenoids from foods such as algae and other animals and modify them through metabolic reactions. Many of the carotenoids present in marine animals are metabolites of β-carotene, fucoxanthin, peridinin, diatoxanthin, alloxanthin, and astaxanthin, etc. Carotenoids found in these animals provide the food chain as well as metabolic pathways. In the present review, I will describe marine animal carotenoids from natural product chemistry, metabolism, food chain, and chemosystematic viewpoints, and also describe new structural carotenoids isolated from marine animals over the last decade. PMID:21566799

  4. Alpha-emitting nuclides in the marine environment (United States)

    Pentreath, R. J.


    The occurrence of alpha-emitting nuclides and their daughter products in the marine environment continues to be a subject of study for many reasons. Those nuclides which occur naturally, in the uranium, thorium and actinium series, are of interest because of their value in determining the rates of geological and geochemical processes in the oceans. Studies of them address such problems as the determination of rates of transfer of particulate matter, deposition rates, bioturbation rates, and so on. Two of the natural alpha-series nuclides in which a different interest has been expressed are 210Po and 226Ra, because their concentrations in marine organisms are such that they contribute to a significant fraction of the background dose rates sustained both by the organisms themselves and by consumers of marine fish and shellfish. To this pool of naturally-occurring nuclides, human activities have added the transuranium nuclides, both from the atmospheric testing of nuclear devices and from the authorized discharges of radioactive wastes into coastal waters and the deep sea. Studies have therefore been made to understand the chemistry of these radionuclides in sea water, their association with sedimentary materials, and their accumulation by marine organisms, the last of these being of particular interest because the transuranics are essentially "novel" elements to the marine fauna and flora. The need to predict the long-term behaviour of these nuclides has, in turn, stimulated research on those naturally-occurring nuclides which may behave in a similar manner.

  5. Marine Robot Autonomy

    CERN Document Server


    Autonomy for Marine Robots provides a timely and insightful overview of intelligent autonomy in marine robots. A brief history of this emerging field is provided, along with a discussion of the challenges unique to the underwater environment and their impact on the level of intelligent autonomy required.  Topics covered at length examine advanced frameworks, path-planning, fault tolerance, machine learning, and cooperation as relevant to marine robots that need intelligent autonomy.  This book also: Discusses and offers solutions for the unique challenges presented by more complex missions and the dynamic underwater environment when operating autonomous marine robots Includes case studies that demonstrate intelligent autonomy in marine robots to perform underwater simultaneous localization and mapping  Autonomy for Marine Robots is an ideal book for researchers and engineers interested in the field of marine robots.      

  6. Asymmetrical, inversely graded, upstream-migrating cyclic steps in marine settings: Late Miocene-early Pliocene Fish Creek-Vallecito Basin, southern California (United States)

    Gong, Chenglin; Chen, Liuqin; West, Logan


    Cyclic steps are ubiquitous in modern sedimentary environments, yet their recognition remains sparse in the rock record. Here, we interpret three sets of undulating backsets (1 to 3) recognized in the late Miocene-early Pliocene Latrania Formation in the Anza-Borrego Desert, the Fish Creek-Vallecito Basin, southern California, USA as the first cm- to dm-scale outcrop record of cyclic steps, based on asymmetrical cross-sections, upstream migration, and inversely graded laminae. Upstream migration and asymmetrical cross-sections of backsets and concomitant backset laminae are attributed to supercritical-to-subcritical flow transitions through weak hydraulic jumps, which are composed of: (i) thin (tens of centimetres) and slower (reported as flow velocities (Ū) of 0.45 to 1.45 m s- 1, with mean value of Ū = 0.89 m s- 1) subcritical (represented by internal Froude numbers (Fr) of 0.67 to 0.99, with mean value of Fr = 0.84) turbidity currents on the stoss sides, and (ii) thin (tens of centimetres) and faster (reported as Ū of 0.99 to 4.03 m s- 1, with mean value of Ū = 2.24 m s- 1) supercritical (represented by Fr of 1.84 to 3.07, with mean value of Fr = 2.42) turbidity flows on the lee sides. The inversely graded laminae in the troughs of backsets are 2 to 5 cm thick, and consist of two discrete divisions: (i) 1 to 2 cm thick, lower finer-grained divisions made up of parallel laminated siltstones, overlain by very fine- to fine-grained sandstones, and (ii) 2 to 3 cm thick, upper divisions composed of medium- to coarse-grained sandstones, with sporadic occurrence of subrounded pebbles. These inversely graded laminae are related to stratified, collisional and/or frictional traction carpets under conditions of high fall-out rates. Due to the poor preservation potential of cyclic steps, the rock record of cyclic steps is generally considered to be rare. The present outcrop-based study presents a detailed analysis of sedimentary facies, growth patterns, and flow

  7. Extensional Tectonics and Sedimentary Architecture Using 3-D Seismic Data: An Example from Hydrocarbon-Bearing Mumbai Offshore Basin, West Coast of India (United States)

    Mukhopadhyay, D. K.; Bhowmick, P. K.; Mishra, P.


    In offshore sedimentary basins, analysis of 3-D seismic data tied with well log data can be used to deduce robust isopach and structure contour maps of different stratigraphic formations. The isopach maps give depocenters whereas structure contour maps give structural relief at a specific time. Combination of these two types of data helps us decipher horst-graben structures, sedimentary basin architecture and tectono-stratigraphic relations through Tertiary time. Restoration of structural cross sections with back-stripping of successively older stratigraphic layers leads to better understand tectono-sedimentary evolution of a basin. The Mumbai (or Bombay) Offshore Basin is the largest basin off the west coast of India and includes Bombay High giant oil/gas field. Although this field was discovered in 1974 and still producing, the basin architecture vis-à-vis structural evolution are not well documented. We take the approach briefly outlined above to study in detail three large hydrocarbon-bearing structures located within the offshore basin. The Cretaceous Deccan basalt forms the basement and hosts prodigal thickness (> 8 km at some localities) of Tertiary sedimentary formations.A two stage deformation is envisaged. At the first stage horst and graben structures formed due to approximately E-W extensional tectonics. This is most spectacularly seen at the basement top level. The faults associated with this extension strike NNW. At the second stage of deformation a set of ENE-striking cross faults have developed leading to the formation of transpressional structures at places. High rate of early sedimentation obliterated horst-graben architecture to large extent. An interesting aspect emerges is that the all the large-scale structures have rather low structural relief. However, the areal extent of such structures are very large. Consequently, these structures hold commercial quantities of oil/gas.

  8. Sedimentary fabrics of the macrotidal, mud-dominated, inner estuary to fluvio-tidal transition zone, Petitcodiac River estuary, New Brunswick, Canada (United States)

    Shchepetkina, Alina; Gingras, Murray K.; Zonneveld, John-Paul; Pemberton, S. George


    The study provides a detailed description of mud-dominated sedimentary fabrics and their application for the rock record within the inner estuary to the fluvial zone of the Petitcodiac River estuary, New Brunswick, Canada. Sedimentological characteristics and facies distributions of the clay- and silt-rich deposits are reported. The inner estuary is characterized by thick accumulations of interbedded silt and silty clay on intertidal banks that flank the tidally influenced channel. The most common sedimentary structures observed are parallel and wavy lamination, small-scale soft-sediment deformation with microfaults, and clay and silt current ripples. The tidal channel contains sandy silt and clayey silt with planar lamination, massive and convolute bedding. The fluvio-tidal transition zone is represented by interbedded trough cross-stratified sand and gravel beds with planar laminated to massive silty mud. The riverine, non-tidal reach of the estuary is characterized by massive, planar tabular and trough cross-stratified gravel-bed deposits. The absence of bioturbation within the inner estuary to the fluvio-tidal transition zone can be explained by the following factors: low water salinities (0-5 ppt), amplified tide and current speeds, and high concentrations of flocculated material in the water body. Notably, downstream in the middle and outer estuary, bioturbation is seasonally pervasive: in those locales the sedimentary conditions are similar, but salinity is higher. In this study, the sedimentological (i.e., grain size, bedding characters, sedimentary structures) differences between the tidal estuary and the fluvial setting are substantial, and those changes occur over only a few hundred meters. This suggests that the widely used concept of an extensive fluvio-tidal transition zone and its depositional character may not be a geographically significant component of fluvial or estuary deposits, which can go unnoticed in the study of the ancient rocks.

  9. Fluvial-aeolian interactions in sediment routing and sedimentary signal buffering: an example from the Indus Basin and Thar Desert (United States)

    East, Amy E.; Clift, Peter D.; Carter, Andrew; Alizai, Anwar; VanLaningham, Sam


    Sediment production and its subsequent preservation in the marine stratigraphic record offshore of large rivers are linked by complex sediment-transfer systems. To interpret the stratigraphic record it is critical to understand how environmental signals transfer from sedimentary source regions to depositional sinks, and in particular to understand the role of buffering in obscuring climatic or tectonic signals. In dryland regions, signal buffering can include sediment cycling through linked fluvial and eolian systems. We investigate sediment-routing connectivity between the Indus River and the Thar Desert, where fluvial and eolian systems exchanged sediment over large spatial scales (hundreds of kilometers). Summer monsoon winds recycle sediment from the lower Indus River and delta northeastward, i.e., downwind and upstream, into the desert. Far-field eolian recycling of Indus sediment is important enough to control sediment provenance at the downwind end of the desert substantially, although the proportion of Indus sediment of various ages varies regionally within the desert; dune sands in the northwestern Thar Desert resemble the Late Holocene–Recent Indus delta, requiring short transport and reworking times. On smaller spatial scales (1–10 m) along fluvial channels in the northern Thar Desert, there is also stratigraphic evidence of fluvial and eolian sediment reworking from local rivers. In terms of sediment volume, we estimate that the Thar Desert could be a more substantial sedimentary store than all other known buffer regions in the Indus basin combined. Thus, since the mid-Holocene, when the desert expanded as the summer monsoon rainfall decreased, fluvial-eolian recycling has been an important but little recognized process buffering sediment flux to the ocean. Similar fluvial-eolian connectivity likely also affects sediment routing and signal transfer in other dryland regions globally.

  10. A multi-proxy study of sedimentary humic substances in the salt marsh of the Changjiang Estuary, China (United States)

    Zhang, Yaoling; Du, Jinzhou; Zhao, Xin; Wu, Wangsuo; Peng, Bo; Zhang, Jing


    To better understand the origin, composition, and reactivity of sedimentary humic substances (HSs) in salt marshes in the Changjiang Estuary, HS samples were isolated from a sediment core that was collected from the Eastern Chongming salt marsh. Chemical and spectroscopic methods were used to analyze the features of these HSs. The results indicate that the studied HSs in the salt marsh sediments are mainly terrestrial-derived and that the sedimentary organic matter (SOM) in the top layer may contain more organic matter from marine sources and/or autochthonous materials due to the dramatic decreasing of the sediment supply as a result of damming. The degradation of labile carbohydrates and proteins and the preservation of refractory lignin components dominate the early diagenetic reactions of SOM in the salt marsh area. The average contents of the carboxylic groups in FAs and HAs are 11.64 ± 1.08 and 7.13 ± 0.16 meq/gC, and those of phenolic groups are 1.95 ± 0.13 and 2.40 ± 0.44 meq/gC, respectively. The content of carboxylic groups increased with increasing depth, while there were no obvious changes in the content of phenolic groups. The average concentration of total proton-binding sites is approximately 12.5 μmol/g sediment for the studied HSs. These values may provide insight into the migration and fate of HS-bound contaminants in sediments and the overlying sea water in the salt marsh areas of the Changjiang Estuary.

  11. Riverine Carbon and the Sedimentary Record on the Continental Shelves (United States)


    focused on the Gulf of Lions: collecting sediment samples and carrying out elemental and stable carbon isotopic analysis . The field work was carried...organisms. For example, the predominance of nitrogen-free biomacromolecules (e.g. tannin , lignin, cellulose, cutin and suberin) over proteins (C:N ≈ 3-4...are cooperating with J. Fabres and A. Calafat (CRG Marine Geosciences) in carrying out elemental and isotopic analysis on suspended material

  12. Chitin Lengthens Power Production in a Sedimentary Microbial Fuel Cell (United States)


    organic carbon sediments demonstrate that chitin enhances and lengthens power production. Keywords—chitin; MFC; microbiology ; iron-reducing bacteria...levels of organic content available as a food source for bacteria in the sediment. Dependent upon applications, there are scenarios where a ethanol, molasses, or vegetable oils. In the case of underwater marine sediment, options for carbon amendment are limited to solid carbon

  13. Radiogenic isotope geochemistry of sedimentary and aquatic systems

    International Nuclear Information System (INIS)

    Stille, P.; Shields, G.


    The following topics are discussed: Basic principles of isotopic geochemistry; weathering; isotopic geochemistry of river water; isotopic geochemistry in the environment; isotopic composition of seawater past and present (Sr, Nd, Pb, Os, Ce); isotope geochemistry of detrital and authigenic clay minerals in marine sediemnts (Rb-Sr, K-Ar, O); the Sm-N isotope system in detrital and authigenic argillaceous sediments. (SR), provided they are of exceptional interest and focused on a single topic. (orig./SR)

  14. Radiogenic isotope geochemistry of sedimentary and aquatic systems

    Energy Technology Data Exchange (ETDEWEB)

    Stille, P.; Shields, G. [Centre National de la Recherche Scientifique (CNRS), 67 - Strasbourg (France). Centre de Sedimentologie et Geochimie de la Surface


    The following topics are discussed: Basic principles of isotopic geochemistry; weathering; isotopic geochemistry of river water; isotopic geochemistry in the environment; isotopic composition of seawater past and present (Sr, Nd, Pb, Os, Ce); isotope geochemistry of detrital and authigenic clay minerals in marine sediemnts (Rb-Sr, K-Ar, O); the Sm-N isotope system in detrital and authigenic argillaceous sediments. (SR), provided they are of exceptional interest and focused on a single topic. (orig./SR)

  15. Synchronous response of sedimentary organic carbon accumulation on the inner shelf of the East China Sea to the water impoundment of Three Gorges and Gezhouba Dams (United States)

    Lin, Jia; Zhu, Qing; Hong, Yuehui; Yuan, Lirong; Liu, Jinzhong; Xu, Xiaoming; Wang, Jianghai


    Coastal seas, located between continents and the open ocean, are an important active carbon pool. The sedimentary total organic carbon (TOC) in these areas is a mixture of terrestrial and marine sources, and can be a powerful proxy for tracing natural processes and human activities. In this study, one fine-grained sediment core (DH5-1) from the inner shelf of the East China Sea was systematically analyzed for TOC and black carbon (BC) contents and TOC stable carbon isotope ratios (δ13C). By combining these data with 210Pb dating, an improved carbon correction model and a two end-member mixing model, we reconstructed century-scale high-resolution sequences of corrected TOC, terrestrial TOC and marine TOC contents and identified two carbon depletion events in the DH5-1 record. The two events, shown as two minima in the TOC profiles, correspond temporally to 1985-1987 AD and 2003-2006 AD, which exactly matches the water impoundment of the Gezhouba Dam and Three Gorges Dam, respectively. In addition, the variations in TOC contents and δ13C values before, during or after the minima demonstrate a relationship between the depletion events and water impoundment of the dams on the Changjiang River. The TOC reductions may represent synchronous responses of sedimentary TOC and resultant ecological effects on the inner shelf of the East China Sea to the water impoundment of the dams. These new TOC records reflect the interaction between natural and anthropogenic processes and, accordingly, provide a deep insight and important references for assessing marine ecological effects resulting from water impoundment of largescale dams.

  16. The predictable nature of the Paleozoic sedimentary sequence beneath the Bruce nuclear site in Southern Ontario, Canada

    International Nuclear Information System (INIS)

    Parmenter, Andrew; Jensen, Mark; Crowe, Richard


    Document available in extended abstract form only. A key aspect of a Deep Geologic Repository (DGR) safety case is the ability to develop and communicate an understanding of the geologic stability and resilience to change at time frames relevant to demonstrating repository performance. As part of an on-going Environmental Assessment, Ontario Power Generation (OPG) recently completed site-specific investigations within an 850 m thick Paleozoic sedimentary sequence beneath the Bruce nuclear site for the proposed development of a DGR for Low and Intermediate Level Waste (L and ILW). As envisioned, the shaft-accessed DGR would be excavated at a nominal depth of 680 m within the low permeability Ordovician argillaceous limestone of the Cobourg Formation, which is overlain by more than 200 m of low permeability Ordovician shale. The geo-scientific investigations revealed a relatively undeformed and laterally continuous architecture within the sedimentary sequence at the repository scale (1.5 km 2 ) and beyond. This paper explores the predictable nature of the sedimentary sequence that has contributed to increasing confidence in an understanding of the spatial distribution of groundwater system properties, deep groundwater system evolution and natural barrier performance. Multi-disciplinary geo-scientific investigations of the Bruce nuclear site were completed in 3 phases between 2006 and 2010. The sub-surface investigations included a deep drilling, coring and in-situ testing program and, the completion of a 19.7 km (9 lines) 2-D seismic reflection survey. The drilling program involved 6 (150 mm dia.) deep boreholes (4-vertical; 2 inclined) that were extended through the sedimentary sequence from 4 drill sites, arranged around the 0.3 km 2 footprint of the proposed repository. The more than 3.8 km of rock core (77 mm dia.) retrieved have provided, in part, a strong basis to understand bedrock lithology and mineralogy, facies assemblages, structure, and oil and gas

  17. Recent Sedimentary Processes Along the Western Continental Margin of the South Korea Plateau, East Sea of Korea (United States)

    Cukur, D.; Um, I. K.; Bahk, J. J.; Chun, J. H.; Lee, G. S.; Soo, K. G.; Horozal, S.; Kim, S. P.


    The continental margins of the marginal seas is largely shaped by a complex interplay of sediment transport processes directed both downslope and along-slope. Factors influence the sediment transport from shelf to the deep basin include: (i) seabed morphology, (ii) climate, (iii) sea level changes, (iv) slope stability, (v) oceanographic regime, and (vi) sediment sources. In order to understand the recent sedimentary processes along the western margin of the South Korea Plateau in the East Sea, we collected multiple geophysical datasets including the subbottom profiler and multibeam echosounder as well as geological sampling. Twelve echo types have been defined and interpreted as deposits formed by shallow marine, hemipelagic sedimentation, bottom currents, combined- (mass-movement/hemipelagic and hemipelagic/turbidites) and mass-movement-processes. Hemipelagic sedimentation, which is reflected as undisturbed layered sediments, appears to have been the primary sedimentary process throughout the study area. Two major slope-parallel channels appear to have acted as major conduits for turbidity currents from shallower shelf into the deep basins. Bottom current deposits, which is expressed as undulating seafloor morphology, are prevalent in the southern mid-slope at water depths between 250 to 450 m. Mass-transport deposits, consisting of chaotic seismic facies, occur in the upper and lower parts of the continental slope. Piston cores confirm the presence of MTDs that are characterized by mud clasts of variable size and shape. Multibeam bathymetry data show that these MTDs chiefly initiate on lower-slopes (400-600 m) where the gradient is up to 3°. In addition, subbottom profiles suggest the presence of numerous faults in close vicinity of headwall scarps; some are extending to the seafloor suggesting their recent activity. Earthquakes associated with tectonic activity are considered as the main triggering mechanism for these MTDs. Overall, the acoustic facies

  18. Laboratory simulated hydrothermal alteration of sedimentary organic matter from Guaymas Basin, Gulf of California. Ph.D. Thesis (United States)

    Leif, Roald N.


    High temperature alteration of sedimentary organic matter associated with marine hydrothermal systems involves complex physical and chemical processes that are not easily measured in most natural systems. Many of these processes can be evaluated indirectly by examining the geochemistry of the hydrothermal system in the laboratory. In this investigation, an experimental organic geochemical approach to studying pyrolysis of sedimentary organic matter is applied to the hydrothermal system in the Guaymas Basin, Gulf of California. A general survey of hydrothermal oils and extractable organic matter (bitumen) in hydrothermally altered sediments identified several homologous series of alkanones associated with a high temperature hydrothermal origin. The alkanones range in carbon number from C11 to C30 with no carbon number preference. Alkan-2-ones are in highest concentrations, with lower amounts of 3-, 4-, 5- (and higher) homologs. The alkanones appear to be pyrolysis products synthesized under extreme hydrothermal conditions. Hydrous pyrolysis and confinement pyrolysis experiments were performed to simulate thermally enhanced diagenetic and catagenetic changes in the immature sedimentary organic matter. The extent of alteration was measured by monitoring the n-alkanes, acyclic isoprenoids, steroid and triterpenoid biomarkers, polycyclic aromatic hydrocarbons and alkanones. The results were compared to bitumen extracts from sediments which have been naturally altered by a sill intrusion and accompanied hydrothermal fluid flow. These pyrolysis experiments duplicated many of the organic matter transformations observed in the natural system. Full hopane and sterane maturation occurred after 48 hr in experiments at 330 deg C with low water/rock mass ratios (0.29). A variety of radical and ionic reactions are responsible for the organic compound conversions which occur under extreme hydrothermal conditions. Short duration pyrolysis experiments revealed that a portion of the

  19. Modern sedimentary environments in a large tidal estuary, Delaware Bay (United States)

    Knebel, H.J.


    Data from an extensive grid of sidescan-sonar records reveal the distribution of sedimentary environments in the large, tidally dominated Delaware Bay estuary. Bathymetric features of the estuary include large tidal channels under the relatively deep (> 10 m water depth) central part of the bay, linear sand shoals (2-8 m relief) that parallel the sides of the tidal channels, and broad, low-relief plains that form the shallow bay margins. The two sedimentary environments that were identified are characterized by either (1) bedload transport and/or erosion or (2) sediment reworking and/or deposition. Sand waves and sand ribbons, composed of medium to coarse sands, define sites of active bedload transport within the tidal channels and in gaps between the linear shoals. The sand waves have spacings that vary from 1 to 70 m, amplitudes of 2 m or less, and crestlines that are usually straight. The orientations of the sand waves and ribbons indicate that bottom sediment movement may be toward either the northwest or southeast along the trends of the tidal channels, although sand-wave asymmetry indicates that the net bottom transport is directed northwestward toward the head of the bay. Gravelly, coarse-grained sediments, which appear as strongly reflective patterns on the sonographs, are also present along the axes and flanks of the tidal channels. These coarse sediments are lag deposits that have developed primarily where older strata were eroded at the bay floor. Conversely, fine sands that compose the linear shoals and muddy sands that cover the shallow bay margins appear mainly on the sonographs either as smooth featureless beds that have uniform light to moderate shading or as mosaics of light and dark patches produced by variations in grain size. These acoustic and textural characteristics are the result of sediment deposition and reworking. Data from this study (1) support the hypothesis that bed configurations under deep tidal flows are functions of current

  20. Inverse modeling of geochemical and mechanical compaction in sedimentary basins (United States)

    Colombo, Ivo; Porta, Giovanni Michele; Guadagnini, Alberto


    We study key phenomena driving the feedback between sediment compaction processes and fluid flow in stratified sedimentary basins formed through lithification of sand and clay sediments after deposition. Processes we consider are mechanic compaction of the host rock and the geochemical compaction due to quartz cementation in sandstones. Key objectives of our study include (i) the quantification of the influence of the uncertainty of the model input parameters on the model output and (ii) the application of an inverse modeling technique to field scale data. Proper accounting of the feedback between sediment compaction processes and fluid flow in the subsurface is key to quantify a wide set of environmentally and industrially relevant phenomena. These include, e.g., compaction-driven brine and/or saltwater flow at deep locations and its influence on (a) tracer concentrations observed in shallow sediments, (b) build up of fluid overpressure, (c) hydrocarbon generation and migration, (d) subsidence due to groundwater and/or hydrocarbons withdrawal, and (e) formation of ore deposits. Main processes driving the diagenesis of sediments after deposition are mechanical compaction due to overburden and precipitation/dissolution associated with reactive transport. The natural evolution of sedimentary basins is characterized by geological time scales, thus preventing direct and exhaustive measurement of the system dynamical changes. The outputs of compaction models are plagued by uncertainty because of the incomplete knowledge of the models and parameters governing diagenesis. Development of robust methodologies for inverse modeling and parameter estimation under uncertainty is therefore crucial to the quantification of natural compaction phenomena. We employ a numerical methodology based on three building blocks: (i) space-time discretization of the compaction process; (ii) representation of target output variables through a Polynomial Chaos Expansion (PCE); and (iii) model

  1. Mechanisms for Fe(III) oxide reduction in sedimentary environments (United States)

    Nevin, Kelly P.; Lovely, Derek R.


    Although it was previously considered that Fe(III)-reducing microorganisms must come into direct contact with Fe(III) oxides in order to reduce them, recent studies have suggested that electron-shuttling compounds and/or Fe(III) chelators, either naturally present or produced by the Fe(III)-reducing microorganisms themselves, may alleviate the need for the Fe(III) reducers to establish direct contact with Fe(III) oxides. Studies with Shewanella alga strain BrY and Fe(III) oxides sequestered within microporous beads demonstrated for the first time that this organism releases a compound(s) that permits electron transfer to Fe(III) oxides which the organism cannot directly contact. Furthermore, as much as 450 w M dissolved Fe(III) was detected in cultures of S. alga growing in Fe(III) oxide medium, suggesting that this organism releases compounds that can solublize Fe(III) from Fe(III) oxide. These results contrast with previous studies, which demonstrated that Geobacter metallireducens does not produce electron-shuttles or Fe(III) chelators. Some freshwater aquatic sediments and groundwaters contained compounds, which could act as electron shuttles by accepting electrons from G. metallireducens and then transferring the electrons to Fe(III). However, other samples lacked significant electron-shuttling capacity. Spectroscopic studies indicated that the electron-shuttling capacity of the waters was not only associated with the presence of humic substances, but water extracts of walnut, oak, and maple leaves contained electron-shuttling compounds did not appear to be humic substances. Porewater from a freshwater aquatic sediment and groundwater from a petroleum-contaminated aquifer contained dissolved Fe(III) (4-16 w M), suggesting that soluble Fe(III) may be available as an electron acceptor in some sedimentary environments. These results demonstrate that in order to accurately model the mechanisms for Fe(III) reduction in sedimentary environments it will be necessary

  2. Radionuclide ratios of cesium and strontium in Tarapur marine environment, west coast of India

    International Nuclear Information System (INIS)

    Baburajan, A.; Rao, D.D.; Chandramouli, S.; Iyer, R.S.; Hegde, A.G.


    Marine environment of Tarapur located 100 km north of Mumbai on the west coast, receives low level liquid waste from Tarapur Atomic Power Station (TAPS) and Fuel Reprocessing Plant (FRP). Radionuclide ratios of cesium and strontium were obtained in source term (the quantum of radioactive liquid waste available for discharge) and different marine samples viz, seawater, sediment, seaweed and marine organisms. A constant ratio of 137 Cs: 134 Cs was observed in seawater and source term. But the ratio of 137 Cs: 90 Sr had wide variation due to selective scavenging of 137 Cs by sedimentary particles at the discharge location. Among the other matrices, sediment showed a higher value of 137 Cs: 134 Cs and 137 Cs: 90 Sr reflecting the cumulative effects of releases from TAPS and FRP and higher distribution coefficient of radiocesium from seawater to sediment. Marine algae indicate a discrimination against sorption of 90 Sr due to the isotopic dilution by stable strontium present in seawater (8mg/l). The marine organisms preying on sediment containing microflora and fauna exhibited radionuclide ratios similar to seawater as the sediment sorbed cesium is not available for assimilation due to the mineral nature of the sediment. The matrices other than sediment indicated the equilibrated activity ratio of radionuclides in seawater which is the recipient medium and reflected the influence of continuous discharge. The sedimentary radionuclide ratio is largely dependent on sorption characteristics of radionuclides and their retention. (author)

  3. Tracking Early Jurassic marine (de)oxygenation (United States)

    Them, T. R., II; Caruthers, A. H.; Gill, B. C.; Gröcke, D. R.; Marroquín, S. M.; Owens, J. D.


    It has been suggested that the carbon cycle was perturbed during the Toarcian OAE (T-OAE) as observed in the carbon isotope record, and more recently other elemental cycles (e.g., Hg, Mo, Os, S). The most widely accepted hypothesis focuses on the emplacement of the Karoo-Ferrar large igneous province, outgassing of greenhouse gases, and subsequent feedbacks in the Earth system, which caused severe environmental change and biological turnover. Feedbacks to elevated atmospheric pCO2 include enhanced weathering rates, dissociation of methane clathrates, increased terrestrial methanogenesis, and widespread marine anoxia. The sequence of events related to the development and duration of marine anoxia are not well constrained for this time interval due to a lack of open-ocean geochemical records. In order to reconstruct the timing of marine deoxygenation during the Early Jurassic T-OAE, we have utilized thallium isotopes, a novel geochemical proxy from multiple anoxic basins in North America and Germany. Three sites representing a basin transect from the Western Canada Sedimentary Basin, and one site from the South German Basin, were chosen to reconstruct the thallium isotopic composition (ɛ205Tl) of the ocean. The ɛ205Tl composition of sediments deposited under anoxic and euxinic water columns records the global seawater ɛ205Tl composition, a function of the amount of manganese oxides that are precipitated. Increased geographic extent of marine anoxia will cause a decrease in manganese oxide precipitation and perturb the thallium system. Importantly, the inputs of thallium are nearly identical, thus changes in these fluxes cannot drive the observed perturbation. Our new Early Jurassic ɛ205Tl records suggest that the onset of marine deoxygenation occurred concurrently with Karoo-Ferrar magmatism in the late Pliensbachian and continued until after the T-OAE. These new data support a Karoo-Ferrar trigger of the T-OAE. However, thallium isotopes also suggest that

  4. Are galaxy discs optically thick?

    International Nuclear Information System (INIS)

    Disney, Michael; Davies, Jonathan; Phillipps, Steven


    We re-examine the classical optical evidence for the low optical depths traditionally assigned to spiral discs and argue that it is highly model-dependent and unconvincing. In particular, layered models with a physically thin but optically thick dust layer behave like optically thin discs. The opposite hypotheses, that such discs are optically thick is then examined in the light of modern evidence. We find it to be consistent with the near-infrared and IRAS observations, with the surface brightnesses, with the HI and CO column densities and with the Hα measurements. (author)

  5. Uranium favorability of tertiary sedimentary rocks of the Pend Oreille River valley, Washington

    International Nuclear Information System (INIS)

    Marjaniemi, D.K.; Robins, J.W.


    Tertiary sedimentary rocks in the Pend Oreille River valley were investigated in a regional study to determine the favorability for potential uranium resources of northeastern Washington. This project involved measurement and sampling of surface sections, collection of samples from isolated outcrops, chemical and mineralogical analyses of samples, and examination of available water well logs. The Box Canyon Dam area north of Ione is judged to have very high favorability. Thick-bedded conglomerates interbedded with sandstones and silty sandstones compose the Tiger Formation in this area, and high radioactivity levels are found near the base of the formation. Uranophane is found along fracture surfaces or in veins. Carbonaceous material is present throughout the Tiger Formation in the area. Part of the broad Pend Oreille valley surrounding Cusick, Washington, is an area of high favorability. Potential host rocks in the Tiger Formation, consisting of arkosic sandstones interbedded with radioactive shales, probably extend throughout the subsurface part of this area. Carbonaceous material is present and some samples contain high concentrations of uranium. In addition, several other possible chemical indicators were found. The Tiger-Lost Creek area is rated as having medium favorability. The Tiger Formation contains very hard, poorly sorted granite conglomerate with some beds of arkosic sandstone and silty sandstone. The granite conglomerate was apparently derived from source rocks having relatively high uranium content. The lower part of the formation is more favorable than the upper part because of the presence of carbonaceous material, anomalously high concentrations of uranium, and other possible chemical indicators. The area west of Ione is judged to have low favorability, because of the very low permeability of the rocks and the very low uranium content

  6. Sedimentary deposits study of the 2006 Java tsunami, in Pangandaran, West Java (preliminary result)

    Energy Technology Data Exchange (ETDEWEB)

    Maemunah, Imun, E-mail: [Geological Agency, Ministry of Energy and Mineral Resources (Indonesia); Institute Technology of Bandung (Indonesia); Suparka, Emmy, E-mail:; Puspito, Nanang T, E-mail: [Institute Technology of Bandung (Indonesia); Hidayati, Sri, E-mail: [Geological Agency, Ministry of Energy and Mineral Resources (Indonesia)


    The 2006 Java Earthquake (Mw 7.2) has generated a tsunami that reached Pangandaran coastal plain with 9.7 m above sea level height of wave. In 2014 we examined the tsunami deposit exposed in shallow trenches along a∼300 m at 5 transect from shoreline to inland on Karapyak and Madasari, Pangandaran. We documented stratigraphically and sedimentologically, the characteristics of Java Tsunami deposit on Karapyak and Madasari and compared both sediments. In local farmland a moderately-sorted, brown soil is buried by a poorly-sorted, grey, medium-grained sand-sheet. The tsunami deposit was distinguished from the underlying soil by a pronounced increase in grain size that becomes finner upwards and landwards. Decreasing concentration of coarse size particles with distance toward inland are in agreement with grain size analysis. The thickest tsunami deposit is about 25 cm found at 84 m from shoreline in Madasari and about 15 cm found at 80 m from shoreline in Karapyak. The thickness of tsunami deposits in some transect become thinner landward but in some other transect lack a consistent suggested strongly affected by local topography. Tsunami deposits at Karapyak and Madasari show many similarities. Both deposits consist of coarse sand that sharply overlies a finer sandy soil. The presence mud drapes and other sedimentary structure like graded bedding, massive beds, mud clasts in many locations shows a dynamics process of tsunami waves. The imbrication coarse and shell fragments of the 2006 Java, tsunami deposits also provide information about the curent direction, allowing us to distinguish run up deposits from backwash deposits.

  7. Sedimentary deposits study of the 2006 Java tsunami, in Pangandaran, West Java (preliminary result)

    International Nuclear Information System (INIS)

    Maemunah, Imun; Suparka, Emmy; Puspito, Nanang T; Hidayati, Sri


    The 2006 Java Earthquake (Mw 7.2) has generated a tsunami that reached Pangandaran coastal plain with 9.7 m above sea level height of wave. In 2014 we examined the tsunami deposit exposed in shallow trenches along a∼300 m at 5 transect from shoreline to inland on Karapyak and Madasari, Pangandaran. We documented stratigraphically and sedimentologically, the characteristics of Java Tsunami deposit on Karapyak and Madasari and compared both sediments. In local farmland a moderately-sorted, brown soil is buried by a poorly-sorted, grey, medium-grained sand-sheet. The tsunami deposit was distinguished from the underlying soil by a pronounced increase in grain size that becomes finner upwards and landwards. Decreasing concentration of coarse size particles with distance toward inland are in agreement with grain size analysis. The thickest tsunami deposit is about 25 cm found at 84 m from shoreline in Madasari and about 15 cm found at 80 m from shoreline in Karapyak. The thickness of tsunami deposits in some transect become thinner landward but in some other transect lack a consistent suggested strongly affected by local topography. Tsunami deposits at Karapyak and Madasari show many similarities. Both deposits consist of coarse sand that sharply overlies a finer sandy soil. The presence mud drapes and other sedimentary structure like graded bedding, massive beds, mud clasts in many locations shows a dynamics process of tsunami waves. The imbrication coarse and shell fragments of the 2006 Java, tsunami deposits also provide information about the curent direction, allowing us to distinguish run up deposits from backwash deposits

  8. Chemical variations in Yellowknife Bay formation sedimentary rocks analyzed by ChemCam on board the Curiosity rover on Mars (United States)

    Mangold, Nicolas; Forni, Olivier; Dromart, G.; Stack, K.M.; Wiens, Roger C.; Gasnault, Olivier; Sumner, Dawn Y.; Nachon, Marion; Meslin, Pierre-Yves; Anderson, Ryan B.; Barraclough, Bruce; Bell, J.F.; Berger, G.; Blaney, D.L.; Bridges, J.C.; Calef, F.; Clark, Brian R.; Clegg, Samuel M.; Cousin, Agnes; Edgar, L.; Edgett, Kenneth S.; Ehlmann, B.L.; Fabre, Cecile; Fisk, M.; Grotzinger, John P.; Gupta, S.C.; Herkenhoff, Kenneth E.; Hurowitz, J.A.; Johnson, J. R.; Kah, Linda C.; Lanza, Nina L.; Lasue, Jeremie; Le Mouélic, S.; Lewin, Eric; Malin, Michael; McLennan, Scott M.; Maurice, S.; Melikechi, Noureddine; Mezzacappa, Alissa; Milliken, Ralph E.; Newsome, H.L.; Ollila, A.; Rowland, Scott K.; Sautter, Violaine; Schmidt, M.E.; Schroder, S.; D'Uston, C.; Vaniman, Dave; Williams, R.A.


    The Yellowknife Bay formation represents a ~5 m thick stratigraphic section of lithified fluvial and lacustrine sediments analyzed by the Curiosity rover in Gale crater, Mars. Previous works have mainly focused on the mudstones that were drilled by the rover at two locations. The present study focuses on the sedimentary rocks stratigraphically above the mudstones by studying their chemical variations in parallel with rock textures. Results show that differences in composition correlate with textures and both manifest subtle but significant variations through the stratigraphic column. Though the chemistry of the sediments does not vary much in the lower part of the stratigraphy, the variations in alkali elements indicate variations in the source material and/or physical sorting, as shown by the identification of alkali feldspars. The sandstones contain similar relative proportions of hydrogen to the mudstones below, suggesting the presence of hydrous minerals that may have contributed to their cementation. Slight variations in magnesium correlate with changes in textures suggesting that diagenesis through cementation and dissolution modified the initial rock composition and texture simultaneously. The upper part of the stratigraphy (~1 m thick) displays rocks with different compositions suggesting a strong change in the depositional system. The presence of float rocks with similar compositions found along the rover traverse suggests that some of these outcrops extend further away in the nearby hummocky plains.

  9. Predicting permeability and electrical conductivity of sedimentary rocks from microgeometry

    International Nuclear Information System (INIS)

    Schlueter, E.M.; Cook, N.G.W.


    The determination of hydrologic parameters that characterize fluid flow through rock masses on a large scale (e.g., hydraulic conductivity, capillary pressure, and relative permeability) is crucial to activities such as the planning and control of enhanced oil recovery operations, and the design of nuclear waste repositories. Hydraulic permeability and electrical conductivity of sedimentary rocks are predicted from the microscopic geometry of the pore space. The cross-sectional areas and perimeters of the individual pores are estimated from two-dimensional scanning electron micrographs of rock sections. The hydraulic and electrical conductivities of the individual pores are determined from these geometrical parameters, using Darcy's law and Ohm's law. Account is taken of the fact that the cross-sections are randomly oriented with respect to the channel axes, and for possible variation of cross-sectional area along the length of the pores. The effective medium theory from solid-state physics is then used to determine an effective average conductance of each pore. Finally, the pores are assumed to be arranged on a cubic lattice, which allows the calculation of overall macroscopic values for the permeability and the electrical conductivity. Preliminary results using Berea, Boise, Massilon and Saint-Gilles sandstones show reasonably close agreement between the predicted and measured transport properties. 12 refs., 5 figs., 1 tab

  10. Aquifer Characterization and Groundwater Potential Evaluation in Sedimentary Rock Formation (United States)

    Ashraf, M. A. M.; Yusoh, R.; Sazalil, M. A.; Abidin, M. H. Z.


    This study was conducted to characterize the aquifer and evaluate the ground water potential in the formation of sedimentary rocks. Electrical resistivity and drilling methods were used to develop subsurface soil profile for determining suitable location for tube well construction. The electrical resistivity method was used to infer the subsurface soil layer by use of three types of arrays, namely, the pole–dipole, Wenner, and Schlumberger arrays. The surveys were conducted using ABEM Terrameter LS System, and the results were analyzed using 2D resistivity inversion program (RES2DINV) software. The survey alignments were performed with maximum electrode spreads of 400 and 800 m by employing two different resistivity survey lines at the targeted zone. The images were presented in the form of 2D resistivity profiles to provide a clear view of the distribution of interbedded sandstone, siltstone, and shale as well as the potential groundwater zones. The potential groundwater zones identified from the resistivity results were confirmed using pumping, step drawdown, and recovery tests. The combination among the three arrays and the correlation between the well log and pumping test are reliable and successful in identifying potential favorable zones for obtaining groundwater in the study area.

  11. Sedimentary uranium deposits in France and French Union

    International Nuclear Information System (INIS)

    Kervella, F.


    The author gives the actual state of our knowledge on uranium deposits found in recent years. Till now in precambrian formations only one important deposit has been found, at Mounana (Gabon) in a series of conglomeratic sandstones belonging to the 'Francevillien'. The observed mineralization is of the uranium-vanadium type. To the carboniferous formations corresponds in France a series of deposits, among which the most important ones are located at Saint-Hippolyte. Uranium as carburans, organic-bound complexes, is contained in lacustrine schists of Westphalian or lower Stephanian formations. A number of occurrences are also known in permo-triassic formations, particularly in the Vanoise Alps, in the Maritime Alps and in the Herault, where important occurrences have recently been found not far from Lodeve. The cretaceous and tertiary systems contain uranium deposits in phosphate rocks (Morocco, Senegal, Togo, Middle-Congo). Two sedimentary oligocene deposits are known in France. Lastly, the Vinaninkarena deposit in Madagascar, known for a long time, is the only important one reported in the quaternary series. (author) [fr

  12. Hydrothermal behaviour of sedimentary saponitic clays from Madrid Basin

    International Nuclear Information System (INIS)

    Cuevas Rodriguez, J.


    The hydrothermal behavior of sedimentary saponitic clays from Madrid Basin has been investigated to assess their potential use as a buffer material in high level radioactive waste repositories. This paper deals with a review of several aspects that has been studied: the adsorption and irreversible fixation of K'+, the alteration in absence of potassium and the effects of heat and steam on textural properties of the smectitic clay. Experiments have covered temperatures up to 175 degree centigree with an excess of liquid water except on the last subject. Chemical and XRD analyses of final clay products and solutions indicates minor alteration of the saponite in the hydrothermal experiments either in the presence or absence of potassium. No illitization or chloritization processes seems to affect the smectite. Sepiolite was found to be largely dissolved at 175 degree centigree, a process that inhibited recrystallization or formation of illite observed when illite was present in significant amounts in starting materials. Accessory minerals (illite and sepiolite) accompanying as traces the saponitic material underwent and intense degradation at 175 degree centigree in absence of potassium. On the other hand, clay steamed at 200 degree centigree showed significant textural changes forming highly stable silt size aggregates which hindered the swelling abilities of the saponitic material, a fact that was previously observed in montmorillonites. (Author) 25 refs


    Vermaire, Jesse C; Prairie, Yves T; Gregory-Eaves, Irene


    Submerged macrophytes are a central component of lake ecosystems; however, little is known regarding their long-term response to environmental change. We have examined the potential of diatoms as indicators of past macrophyte biomass. We first sampled periphyton to determine whether habitat was a predictor of diatom assemblage. We then sampled 41 lakes in Quebec, Canada, to evaluate whether whole-lake submerged macrophyte biomass (BiomEpiV) influenced surface sediment diatom assemblages. A multivariate regression tree (MRT) was used to construct a semiquantitative model to reconstruct past macrophyte biomass. We determined that periphytic diatom assemblages on macrophytes were significantly different from those on wood and rocks (ANOSIM R = 0.63, P macrophyte, nutrient-limited lakes (BiomEpiV ≥525 μg · L(-1) ; total phosphorus [TP] macrophyte, nutrient-limited lakes (BiomEpiV macrophytes have a significant influence on diatom community structure and that sedimentary diatom assemblages can be used to infer past macrophyte abundance. © 2011 Phycological Society of America.

  14. Conventional natural gas resources of the Western Canada Sedimentary Basin

    International Nuclear Information System (INIS)

    Bowers, B.


    The use of decline curve analysis to analyse and extrapolate the production performance of oil and gas reservoirs was discussed. This mathematical analytical tool has been a valid method for estimating the conventional crude oil resources of the Western Canada Sedimentary Basin (WCSB). However, it has failed to provide a generally acceptable estimate of the conventional natural gas resources of the WCSB. This paper proposes solutions to this problem and provides an estimate of the conventional natural gas resources of the basin by statistical analysis of the declining finding rates. Although in the past, decline curve analysis did not reflect the declining finding rates of natural gas in the WCSB, the basin is now sufficiently developed that estimates of conventional natural gas resources can be made by this analytical tool. However, the analysis must take into account the acceleration of natural gas development drilling that has occurred over the lifetime of the basin. It was concluded that ultimate resources of conventional marketable natural gas of the WCSB estimated by decline analysis amount to 230 tcf. It was suggested that further research be done to explain why the Canadian Gas Potential Committee (CGPC) estimate for Alberta differs from the decline curve analysis method. 6 refs., 35 figs

  15. Marine Environmental History

    DEFF Research Database (Denmark)

    Poulsen, Bo


    human society and natural marine resources. Within this broad topic, several trends and objectives are discernable. The essay argue that the so-called material marine environmental history has its main focus on trying to reconstruct the presence, development and environmental impact of past fisheries......This essay provides an overview of recent trends in the historiography of marine environmental history, a sub-field of environmental history which has grown tremendously in scope and size over the last c. 15 years. The object of marine environmental history is the changing relationship between...... and whaling operations. This ambition often entails a reconstruction also of how marine life has changed over time. The time frame rages from Paleolithicum to the present era. The field of marine environmental history also includes a more culturally oriented environmental history, which mainly has come...

  16. [Endoscopic full-thickness resection]. (United States)

    Meier, B; Schmidt, A; Caca, K


    Conventional endoscopic resection techniques such as endoscopic mucosal resection (EMR) or endoscopic submucosal dissection (ESD) are powerful tools for the treatment of gastrointestinal (GI) neoplasms. However, those techniques are limited to the superficial layers of the GI wall (mucosa and submucosa). Lesions without lifting sign (usually arising from deeper layers) or lesions in difficult anatomic positions (appendix, diverticulum) are difficult - if not impossible - to resect using conventional techniques, due to the increased risk of complications. For larger lesions (>2 cm), ESD appears to be superior to the conventional techniques because of the en bloc resection, but the procedure is technically challenging, time consuming, and associated with complications even in experienced hands. Since the development of the over-the-scope clips (OTSC), complications like bleeding or perforation can be endoscopically better managed. In recent years, different endoscopic full-thickness resection techniques came to the focus of interventional endoscopy. Since September 2014, the full-thickness resection device (FTRD) has the CE marking in Europe for full-thickness resection in the lower GI tract. Technically the device is based on the OTSC system and combines OTSC application and snare polypectomy in one step. This study shows all full-thickness resection techniques currently available, but clearly focuses on the experience with the FTRD in the lower GI tract.

  17. Marine electrical practice

    CERN Document Server

    Watson, G O


    Marine Engineering Series: Marine Electrical Practice, Sixth Edition focuses on changes in the marine industry, including the application of programmable electronic systems, generators, and motors. The publication first ponders on insulation and temperature ratings of equipment, protection and discrimination, and AC generators. Discussions focus on construction, shaft-drive generators, effect of unbalanced loading, subtransient and transient reactance, protection discrimination, fault current, measurement of ambient air temperature, and basis of machine ratings. The text then examines AC switc

  18. Gammatography of thick lead vessels

    International Nuclear Information System (INIS)

    Raghunath, V.M.; Bhatnagar, P.K.; Sundaram, V.M.


    Radiography, scintillation and GM counting and dose measurements using ionisation chamber equipment are commonly used for detecting flaws/voids in materials. The first method is mostly used for steel vessels and to a lesser extent thin lead vessels also and is essentially qualitative. Dose measuring techniques are used for very thick and large lead vessels for which high strength radioactive sources are required, with its inherent handling problems. For vessels of intermediate thicknesses, it is ideal to use a small strength source and a GM or scintillation counter assembly. At the Reactor Research Centre, Kalpakkam, such a system was used for checking three lead vessels of thicknesses varying from 38mm to 65mm. The tolerances specified were +- 4% variation in lead thickness. The measurements also revealed the non concentricity of one vessel which had a thickness varying from 38mm to 44mm. The second vessel was patently non-concentric and the dimensional variation was truly reproduced in the measurements. A third vessel was fabricated with careful control of dimensions and the measurements exhibited good concentricity. Small deviations were observed, attributable to imperfect bondings between steel and lead. This technique has the following advantages: (a) weaker sources used result in less handling problems reducing the personnel exposures considerably; (b) the sensitivity of the instrument is quite good because of better statistics; (c) the time required for scanning a small vessel is more, but a judicious use of a scintillometer for initial fast scan will help in reducing the total scanning time; (d) this method can take advantage of the dimensional variations themselves to get the calibration and to estimate the deviations from specified tolerances. (auth.)

  19. Thick resist for MEMS processing (United States)

    Brown, Joe; Hamel, Clifford


    The need for technical innovation is always present in today's economy. Microfabrication methods have evolved in support of the demand for smaller and faster integrated circuits with price performance improvements always in the scope of the manufacturing design engineer. The dispersion of processing technology spans well beyond IC fabrication today with batch fabrication and wafer scale processing lending advantages to MEMES applications from biotechnology to consumer electronics from oil exploration to aerospace. Today the demand for innovative processing techniques that enable technology is apparent where only a few years ago appeared too costly or not reliable. In high volume applications where yield and cost improvements are measured in fractions of a percent it is imperative to have process technologies that produce consistent results. Only a few years ago thick resist coatings were limited to thickness less than 20 microns. Factors such as uniformity, edge bead and multiple coatings made high volume production impossible. New developments in photoresist formulation combined with advanced coating equipment techniques that closely controls process parameters have enable thick photoresist coatings of 70 microns with acceptable uniformity and edge bead in one pass. Packaging of microelectronic and micromechanical devices is often a significant cost factor and a reliability issue for high volume low cost production. Technologies such as flip- chip assembly provide a solution for cost and reliability improvements over wire bond techniques. The processing for such technology demands dimensional control and presents a significant cost savings if it were compatible with mainstream technologies. Thick photoresist layers, with good sidewall control would allow wafer-bumping technologies to penetrate the barriers to yield and production where costs for technology are the overriding issue. Single pass processing is paramount to the manufacturability of packaging

  20. Thermal conductivity of sedimentary rocks as function of Biot’s coefficient

    DEFF Research Database (Denmark)

    Orlander, Tobias; Pasquinelli, Lisa; Asmussen, J.J.


    A theoretical model for prediction of effective thermal conductivity with application to sedimentary rocks is presented. Effective thermal conductivity of sedimentary rocks can be estimated from empirical relations or theoretically modelled. Empirical relations are limited to the empirical...... conductivity of solids is typically orders of magnitude larger than that of fluids, grain contacts constituting the solid connectivity governs the heat transfer of sedi-mentary rocks and hence should be the basis for modelling effective thermal con-ductivity. By introducing Biot’s coefficient, α, we propose (1...... – α) as a measure of the solid connectivity and show how effective thermal conductivity of water saturated and dry sandstones can be modelled....

  1. Lithofacies-paleo-geography and uranium sedimentary facies in Hailar basin

    International Nuclear Information System (INIS)

    Qi Fucheng


    Cretaceous-Tertiary sedimentary paleo-structure and lithofacies-paleo-geography in Hailar Basin are described. Taking Chenqi coal field as an example, the sedimentary facies pattern of coal-bearing series characterized by alternating sedimentation of fluviatile and lacustrine-swampy facies is reconstructed. It is pointed out that this sedimentary facies not only controls the sedimentation and distribution of syngenetic uranium mineralization, but also is a favourable place that converges uranium-bearing solution and reduces and precipitates uranium for the second time in epigenetic mineralization

  2. Biosurfactants from marine microorganisms

    Directory of Open Access Journals (Sweden)

    Suppasil Maneerat


    Full Text Available Biosurfactants are the surface-active molecules synthesized by microorganisms. With the advantage of environmental compatibility, the demand for biosurfactants has been steadily increasing and may eventually replace their chemically synthesized counterparts. Marine biosurfactants produced by some marine microorganisms have been paid more attention, particularly for the bioremediation of the sea polluted by crude oil. This review describes screening of biosurfactant-producing microorganisms, the determination of biosurfactant activity as well as the recovery of marine surfactant. The uses of marine biosurfactants for bioremediation are also discussed.

  3. Characterizing Marine Soundscapes. (United States)

    Erbe, Christine; McCauley, Robert; Gavrilov, Alexander


    The study of marine soundscapes is becoming widespread and the amount of data collected is increasing rapidly. Data owners (typically academia, industry, government, and defense) are negotiating data sharing and generating potential for data syntheses, comparative studies, analyses of trends, and large-scale and long-term acoustic ecology research. A problem is the lack of standards and commonly agreed protocols for the recording of marine soundscapes, data analysis, and reporting that make a synthesis and comparison of results difficult. We provide a brief overview of the components in a marine soundscape, the hard- and software tools for recording and analyzing marine soundscapes, and common reporting formats.

  4. Sedimentary architecture and depositional evolution of the Quaternary coastal plain of Maricá, Rio de Janeiro, Brazil

    Directory of Open Access Journals (Sweden)

    André Luiz Carvalho da Silva

    Full Text Available The coastal geomorphology of Maricá (Rio de Janeiro state is characterized by a large lagoon and by two sandy barriers that confine a series of small isolated chain-like lagoons. Data collected from ground-penetrating radar and boreholes from the central coastal plain of Maricá provided information on the sedimentary architecture and evolution of this area in the Quaternary. Six lithological units were identified comprising three depositional sequences limited by erosional surfaces, related to barrier-lagoon systems that migrated onshore, offshore, and longshore, giving rise to a sedimentary deposit 25 m thick or more. The data reveal a retrograding barrier overlying a basal mud unit which rests in unconformity upon Precambrian basement, thus characterizing an important Pleistocene transgression. A second Pleistocene barrier of 45,000 cal years BP migrated over a lagoonal mud unit (48,000-45,000 cal years BP reaching over the previous barrier. A progradational phase followed due to a fall of sea level. A long interval of erosion of the barrier created an unconformity that represents the Pleistocene-Holocene boundary. A beachrock in nearby Itaipuaçu, 100 m offshore from the present-day beach, dated as 8,500 cal years BP marks the onset of Holocene sedimentation due to gradually rising sea level, which continued until at about 5,000 years ago. This promoted the retrogradation of the barrier-lagoon system. A brief episode of progradation is observed as a series of paleobeach scarps. Today's rising sea level is causing the retrogradation of the barrier.

  5. The Cenozoic western Svalbard margin: sediment geometry and sedimentary processes in an area of ultraslow oceanic spreading (United States)

    Amundsen, Ingrid Marie Hasle; Blinova, Maria; Hjelstuen, Berit Oline; Mjelde, Rolf; Haflidason, Haflidi


    The northeastern high-latitude North Atlantic is characterised by the Bellsund and Isfjorden fans on the continental slope off west Svalbard, the asymmetrical ultraslow Knipovich spreading ridge and a 1,000 m deep rift valley. Recently collected multichannel seismic profiles and bathymetric records now provide a more complete picture of sedimentary processes and depositional environments within this region. Both downslope and alongslope sedimentary processes are identified in the study area. Turbidity currents and deposition of glacigenic debris flows are the dominating downslope processes, whereas mass failures, which are a common process on glaciated margins, appear to have been less significant. The slide debrite observed on the Bellsund Fan is most likely related to a 2.5-1.7 Ma old failure on the northwestern Barents Sea margin. The seismic records further reveal that alongslope current processes played a major role in shaping the sediment packages in the study area. Within the Knipovich rift valley and at the western rift flank accumulations as thick as 950-1,000 m are deposited. We note that oceanic basement is locally exposed within the rift valley, and that seismostratigraphic relationships indicate that fault activity along the eastern rift flank lasted until at least as recently as 1.5 Ma. A purely hemipelagic origin of the sediments in the rift valley and on the western rift flank is unlikely. We suggest that these sediments, partly, have been sourced from the western Svalbard—northwestern Barents Sea margin and into the Knipovich Ridge rift valley before continuous spreading and tectonic activity caused the sediments to be transported out of the valley and westward.

  6. Textural characteristics and sedimentary environment of sediment at eroded and deposited regions in the severely eroded coastline of Batu Pahat, Malaysia. (United States)

    Wan Mohtar, Wan Hanna Melini; Nawang, Siti Aminah Bassa; Abdul Maulud, Khairul Nizam; Benson, Yannie Anak; Azhary, Wan Ahmad Hafiz Wan Mohamed


    This study investigates the textural characteristics of sediments collected at eroded and deposited areas of highly severed eroded coastline of Batu Pahat, Malaysia. Samples were taken from systematically selected 23 locations along the 67km stretch of coastline and are extended to the fluvial sediments of the main river of Batu Pahat. Grain size distribution analysis was conducted to identify its textural characteristics and associated sedimentary transport behaviours. Sediments obtained along the coastline were fine-grained material with averaged mean size of 7.25 ϕ, poorly sorted, positively skewed and has wide distributions. Samples from eroded and deposition regions displayed no distinctive characteristics and exhibited similar profiles. The high energy condition transported the sediments as suspension, mostly as pelagic and the sediments were deposited as shallow marine and agitated deposits. The fluvial sediments of up to 3km into the river have particularly similar profile of textural characteristics with the neighbouring marine sediments from the river mouth. Profiles were similar with marine sediments about 3km opposite the main current and can go up to 10km along the current of Malacca Straits. Copyright © 2017 Elsevier B.V. All rights reserved.

  7. Environmental marine geology of the Arctic Ocean

    International Nuclear Information System (INIS)

    Mudie, P.J.


    The Arctic Ocean and its ice cover are major regulators of Northern Hemisphere climate, ocean circulation and marine productivity. The Arctic is also very sensitive to changes in the global environment because sea ice magnifies small changes in temperature, and because polar regions are sinks for air pollutants. Marine geology studies are being carried out to determine the nature and rate of these environmental changes by study of modem ice and sea-bed environments, and by interpretation of geological records imprinted in the sea-floor sediments. Sea ice camps, an ice island, and polar icebreakers have been used to study both western and eastern Arctic Ocean basins. Possible early warning signals of environmental changes in the Canadian Arctic are die-back in Arctic sponge reefs, outbreaks of toxic dinoflagellates, and pesticides in the marine food chain. Eastern Arctic ice and surface waters are contaminated by freon and radioactive fallout from Chernobyl. At present, different sedimentary processes operate in the pack ice-covered Canadian polar margin than in summer open waters off Alaska and Eurasia. The geological records, however, suggest that a temperature increase of 1-4 degree C would result in summer open water throughout the Arctic, with major changes in ocean circulation and productivity of waters off Eastern North America, and more widespread transport of pollutants from eastern to western Arctic basins. More studies of longer sediment cores are needed to confirm these interpretations, but is is now clear that the Arctic Ocean has been the pacemaker of climate change during the past 1 million years

  8. Swimming activity in marine fish. (United States)

    Wardle, C S


    Marine fish are capable of swimming long distances in annual migrations; they are also capable of high-speed dashes of short duration, and they can occupy small home territories for long periods with little activity. There is a large effect of fish size on the distance fish migrate at slow swimming speeds. When chased by a fishing trawl the effect of fish size on swimming performance can decide their fate. The identity and thickness of muscle used at each speed and evidence for the timing of myotomes used during the body movement cycle can be detected using electromyogram (EMG) electrodes. The cross-sectional area of muscle needed to maintain different swimming speeds can be predicted by relating the swimming drag force to the muscle force. At maximum swimming speed one completed cycle of swimming force is derived in sequence from the whole cross-sectional area of the muscles along the two sides of the fish. This and other aspects of the swimming cycle suggest that each myotome might be responsible for generating forces involved in particular stages of the tail sweep. The thick myotomes at the head end shorten during the peak thrust of the tail blade whereas the thinner myotomes nearer the tail generate stiffness appropriate for transmission of these forces and reposition the tail for the next cycle.

  9. Fluid flow and sediment transport in evolving sedimentary basins (United States)

    Swenson, John Bradley

    This thesis consists of three studies that focus on groundwater flow and sediment transport in evolving sedimentary basins. The first study considers the subsurface hydrodynamic response to basin-scale transgression and regression and its implications for stratiform ore genesis. I demonstrate that the transgressive sequence focuses marginward-directed, compaction-driven discharge within a basal aquifer during progradation and deposition of the overlying regressive sequence, isolates the basal aquifer from overlying flow systems, and serves as a chemical sink for metal-bearing brines. In the second study, I develop a new theory for the shoreline response to subsidence, sediment supply, and sea level. In this theory, sediment transport in a fluvio-deltaic basin is formally equivalent to heat transfer in a two-phase (liquid and isothermal solid) system: the fluvial system is analogous to a conduction-dominated liquid phase, the shoreline is the melting front, and the water depth at the delta toe is equivalent to the latent heat of fusion. A natural consequence of this theory is that sediment-starved basins do not possess an equilibrium state. In contrast to existing theories, I do not observe either strong phase shifting or attenuation of the shoreline response to low-frequency eustatic forcing; rather, shoreline tracks sea level over a spectrum of forcing frequencies, and its response to low-frequency forcing is amplified relative to the high-frequency response. For the third study, I use a set of dimensionless numbers from the previous study as a mathematical framework for providing a unified treatment of existing stratigraphic theories. In the limit of low-amplitude eustatic forcing, my study suggests that strong phase shifting between shoreline and sea level is a consequence of specifying the sedimentation rate at the shoreline; basins free of this constraint do not develop strong phase shifts.

  10. Constraining Depositional Slope From Sedimentary Structures in Sandy Braided Streams (United States)

    Lynds, R. M.; Mohrig, D.; Heller, P. L.


    Determination of paleoslopes in ancient fluvial systems has potentially broad application to quantitatively constraining the history of tectonics and paleoclimate in continental sequences. Our method for calculating paleoslopes for sandy braided streams is based upon a simple physical model that establishes depositional skin-frictional shear stresses from assemblages of sedimentary structures and their associated grain size distributions. The addition of a skin-frictional shear stress, with a geometrically determined form-drag shear stress results in a total boundary shear stress which is directly related to water-surface slope averaged over an appropriate spatial scale. In order to apply this model to ancient fluvial systems, it is necessary to measure the following: coarsest suspended sediment size, finest grain size carried in bed load, flow depth, dune height, and dune length. In the rock record, suspended load and bed load can be accurately assessed by well-preserved suspended load deposits ("low-energy" ripples) and bed load deposits (dune foresets). This model predicts an average slope for the North Loup River near Taylor, Nebraska (modern case study) of 2.7 x 10-3. The measured reach-averaged water surface slope for the same reach of the river is 1.37 x 10-3. We suggest that it is possible to calculate the depositional slope of a sandy fluvial system by a factor of approximately two. Additionally, preliminary application of this model to the Lower Jurassic Kayenta Formation throughout the Colorado Plateau provides a promising and consistent evaluation of paleoslope in an ancient and well-preserved, sandy braided stream deposit.

  11. Elemental Geochemistry of Sedimentary Rocks at Yellowknife Bay, Gale Crater, Mars (United States)

    McLennan, S. M.; Anderson, R. B.; Bell, J. F.; Bridges, J. C.; Calef, F.; Campbell, J. L.; Clark, B. C.; Clegg, S.; Conrad, P.; Cousin, A.; Des Marais, D. J.; Dromart, G.; Dyar, M. D.; Edgar, L. A.; Ehlmann, B. L.; Fabre, C.; Forni, O.; Gasnault, O.; Gellert, R.; Gordon, S.; Grant, J. A.; Grotzinger, J. P.; Gupta, S.; Herkenhoff, K. E.; Hurowitz, J. A.; King, P. L.; Le Mouélic, S.; Leshin, L. A.; Léveillé, R.; Lewis, K. W.; Mangold, N.; Maurice, S.; Ming, D. W.; Morris, R. V.; Nachon, M.; Newsom, H. E.; Ollila, A. M.; Perrett, G. M.; Rice, M. S.; Schmidt, M. E.; Schwenzer, S. P.; Stack, K.; Stolper, E. M.; Sumner, D. Y.; Treiman, A. H.; VanBommel, S.; Vaniman, D. T.; Vasavada, A.; Wiens, R. C.; Yingst, R. A.; Kemppinen, Osku; Bridges, Nathan; Johnson, Jeffrey R.; Minitti, Michelle; Cremers, David; Farmer, Jack; Godber, Austin; Wadhwa, Meenakshi; Wellington, Danika; McEwan, Ian; Newman, Claire; Richardson, Mark; Charpentier, Antoine; Peret, Laurent; Blank, Jennifer; Weigle, Gerald; Li, Shuai; Milliken, Ralph; Robertson, Kevin; Sun, Vivian; Baker, Michael; Edwards, Christopher; Farley, Kenneth; Griffes, Jennifer; Miller, Hayden; Newcombe, Megan; Pilorget, Cedric; Siebach, Kirsten; Brunet, Claude; Hipkin, Victoria; Marchand, Geneviève; Sánchez, Pablo Sobrón; Favot, Laurent; Cody, George; Steele, Andrew; Flückiger, Lorenzo; Lees, David; Nefian, Ara; Martin, Mildred; Gailhanou, Marc; Westall, Frances; Israël, Guy; Agard, Christophe; Baroukh, Julien; Donny, Christophe; Gaboriaud, Alain; Guillemot, Philippe; Lafaille, Vivian; Lorigny, Eric; Paillet, Alexis; Pérez, René; Saccoccio, Muriel; Yana, Charles; Armiens-Aparicio, Carlos; Rodríguez, Javier Caride; Blázquez, Isaías Carrasco; Gómez, Felipe Gómez; Gómez-Elvira, Javier; Hettrich, Sebastian; Malvitte, Alain Lepinette; Jiménez, Mercedes Marín; Martínez-Frías, Jesús; Martín-Soler, Javier; Martín-Torres, F. Javier; Jurado, Antonio Molina; Mora-Sotomayor, Luis; Caro, Guillermo Muñoz; López, Sara Navarro; Peinado-González, Verónica; Pla-García, Jorge; Manfredi, José Antonio Rodriguez; Romeral-Planelló, Julio José; Fuentes, Sara Alejandra Sans; Martinez, Eduardo Sebastian; Redondo, Josefina Torres; Urqui-O'Callaghan, Roser; Mier, María-Paz Zorzano; Chipera, Steve; Lacour, Jean-Luc; Mauchien, Patrick; Sirven, Jean-Baptiste; Manning, Heidi; Fairén, Alberto; Hayes, Alexander; Joseph, Jonathan; Squyres, Steven; Sullivan, Robert; Thomas, Peter; Dupont, Audrey; Lundberg, Angela; Melikechi, Noureddine; Mezzacappa, Alissa; DeMarines, Julia; Grinspoon, David; Reitz, Günther; Prats, Benito; Atlaskin, Evgeny; Genzer, Maria; Harri, Ari-Matti; Haukka, Harri; Kahanpää, Henrik; Kauhanen, Janne; Kemppinen, Osku; Paton, Mark; Polkko, Jouni; Schmidt, Walter; Siili, Tero; Wray, James; Wilhelm, Mary Beth; Poitrasson, Franck; Patel, Kiran; Gorevan, Stephen; Indyk, Stephen; Paulsen, Gale; Bish, David; Schieber, Juergen; Gondet, Brigitte; Langevin, Yves; Geffroy, Claude; Baratoux, David; Berger, Gilles; Cros, Alain; d'Uston, Claude; Lasue, Jérémie; Lee, Qiu-Mei; Meslin, Pierre-Yves; Pallier, Etienne; Parot, Yann; Pinet, Patrick; Schröder, Susanne; Toplis, Mike; Lewin, Éric; Brunner, Will; Heydari, Ezat; Achilles, Cherie; Oehler, Dorothy; Sutter, Brad; Cabane, Michel; Coscia, David; Israël, Guy; Szopa, Cyril; Robert, François; Sautter, Violaine; Buch, Arnaud; Stalport, Fabien; Coll, Patrice; François, Pascaline; Raulin, François; Teinturier, Samuel; Cameron, James; DeLapp, Dorothea; Dingler, Robert; Jackson, Ryan Steele; Johnstone, Stephen; Lanza, Nina; Little, Cynthia; Nelson, Tony; Williams, Richard B.; Jones, Andrea; Kirkland, Laurel; Baker, Burt; Cantor, Bruce; Caplinger, Michael; Davis, Scott; Duston, Brian; Edgett, Kenneth; Fay, Donald; Hardgrove, Craig; Harker, David; Herrera, Paul; Jensen, Elsa; Kennedy, Megan R.; Krezoski, Gillian; Krysak, Daniel; Lipkaman, Leslie; Malin, Michael; McCartney, Elaina; McNair, Sean; Nixon, Brian; Posiolova, Liliya; Ravine, Michael; Salamon, Andrew; Saper, Lee; Stoiber, Kevin; Supulver, Kimberley; Van Beek, Jason; Van Beek, Tessa; Zimdar, Robert; French, Katherine Louise; Iagnemma, Karl; Miller, Kristen; Summons, Roger; Goesmann, Fred; Goetz, Walter; Hviid, Stubbe; Johnson, Micah; Lefavor, Matthew; Lyness, Eric; Breves, Elly; Fassett, Caleb; Blake, David F.; Bristow, Thomas; Edwards, Laurence; Haberle, Robert; Hoehler, Tori; Hollingsworth, Jeff; Kahre, Melinda; Keely, Leslie; McKay, Christopher; Wilhelm, Mary Beth; Bleacher, Lora; Brinckerhoff, William; Choi, David; Dworkin, Jason P.; Eigenbrode, Jennifer; Floyd, Melissa; Freissinet, Caroline; Garvin, James; Glavin, Daniel; Harpold, Daniel; Jones, Andrea; Mahaffy, Paul; Martin, David K.; McAdam, Amy; Pavlov, Alexander; Raaen, Eric; Smith, Michael D.; Stern, Jennifer; Tan, Florence; Trainer, Melissa; Meyer, Michael; Posner, Arik; Voytek, Mary; Anderson, Robert C.; Aubrey, Andrew; Beegle, Luther W.; Behar, Alberto; Blaney, Diana; Brinza, David; Christensen, Lance; Crisp, Joy A.; DeFlores, Lauren; Ehlmann, Bethany; Feldman, Jason; Feldman, Sabrina; Flesch, Gregory; Jun, Insoo; Keymeulen, Didier; Maki, Justin; Mischna, Michael; Morookian, John Michael; Parker, Timothy; Pavri, Betina; Schoppers, Marcel; Sengstacken, Aaron; Simmonds, John J.; Spanovich, Nicole; Juarez, Manuel de la Torre; Webster, Christopher R.; Yen, Albert; Archer, Paul Douglas; Cucinotta, Francis; Jones, John H.; Niles, Paul; Rampe, Elizabeth; Nolan, Thomas; Fisk, Martin; Radziemski, Leon; Barraclough, Bruce; Bender, Steve; Berman, Daniel; Dobrea, Eldar Noe; Tokar, Robert; Williams, Rebecca M. E.; Cleghorn, Timothy; Huntress, Wesley; Manhès, Gérard; Hudgins, Judy; Olson, Timothy; Stewart, Noel; Sarrazin, Philippe; Vicenzi, Edward; Wilson, Sharon A.; Bullock, Mark; Ehresmann, Bent; Hamilton, Victoria; Hassler, Donald; Peterson, Joseph; Rafkin, Scot; Zeitlin, Cary; Fedosov, Fedor; Golovin, Dmitry; Karpushkina, Natalya; Kozyrev, Alexander; Litvak, Maxim; Malakhov, Alexey; Mitrofanov, Igor; Mokrousov, Maxim; Nikiforov, Sergey; Prokhorov, Vasily; Sanin, Anton; Tretyakov, Vladislav; Varenikov, Alexey; Vostrukhin, Andrey; Kuzmin, Ruslan; Wolff, Michael; Botta, Oliver; Drake, Darrell; Bean, Keri; Lemmon, Mark; Lee, Ella Mae; Sucharski, Robert; Hernández, Miguel Ángel de Pablo; Ávalos, Juan José Blanco; Ramos, Miguel; Kim, Myung-Hee; Malespin, Charles; Plante, Ianik; Muller, Jan-Peter; Navarro-González, Rafael; Ewing, Ryan; Boynton, William; Downs, Robert; Fitzgibbon, Mike; Harshman, Karl; Morrison, Shaunna; Dietrich, William; Kortmann, Onno; Palucis, Marisa; Williams, Amy; Lugmair, Günter; Wilson, Michael A.; Rubin, David; Jakosky, Bruce; Balic-Zunic, Tonci; Frydenvang, Jens; Jensen, Jaqueline Kløvgaard; Kinch, Kjartan; Koefoed, Asmus; Madsen, Morten Bo; Stipp, Susan Louise Svane; Boyd, Nick; Pradler, Irina; Jacob, Samantha; Owen, Tobias; Rowland, Scott; Atlaskin, Evgeny; Savijärvi, Hannu; Boehm, Eckart; Böttcher, Stephan; Burmeister, Sönke; Guo, Jingnan; Köhler, Jan; García, César Martín; Mueller-Mellin, Reinhold; Wimmer-Schweingruber, Robert; McConnochie, Timothy; Benna, Mehdi; Franz, Heather; Bower, Hannah; Brunner, Anna; Blau, Hannah; Boucher, Thomas; Carmosino, Marco; Atreya, Sushil; Elliott, Harvey; Halleaux, Douglas; Rennó, Nilton; Wong, Michael; Pepin, Robert; Elliott, Beverley; Spray, John; Thompson, Lucy; Williams, Joshua; Vasconcelos, Paulo; Bentz, Jennifer; Nealson, Kenneth; Popa, Radu; Kah, Linda C.; Moersch, Jeffrey; Tate, Christopher; Day, Mackenzie; Kocurek, Gary; Hallet, Bernard; Sletten, Ronald; Francis, Raymond; McCullough, Emily; Cloutis, Ed; ten Kate, Inge Loes; Kuzmin, Ruslan; Arvidson, Raymond; Fraeman, Abigail; Scholes, Daniel; Slavney, Susan; Stein, Thomas; Ward, Jennifer; Berger, Jeffrey; Moores, John E.


    Sedimentary rocks examined by the Curiosity rover at Yellowknife Bay, Mars, were derived from sources that evolved from an approximately average martian crustal composition to one influenced by alkaline basalts. No evidence of chemical weathering is preserved, indicating arid, possibly cold, paleoclimates and rapid erosion and deposition. The absence of predicted geochemical variations indicates that magnetite and phyllosilicates formed by diagenesis under low-temperature, circumneutral pH, rock-dominated aqueous conditions. Analyses of diagenetic features (including concretions, raised ridges, and fractures) at high spatial resolution indicate that they are composed of iron- and halogen-rich components, magnesium-iron-chlorine-rich components, and hydrated calcium sulfates, respectively. Composition of a cross-cutting dike-like feature is consistent with sedimentary intrusion. The geochemistry of these sedimentary rocks provides further evidence for diverse depositional and diagenetic sedimentary environments during the early history of Mars.

  12. Sedimentary environment and facies of St Lucia Estuary Mouth, Zululand, South Africa (United States)

    Wright, C. I.; Mason, T. R.

    The St. Lucia Estuary is situated on the subtropical, predominantly microtidal Zululand coast. Modern sedimentary environments within the estuary fall into three categories: (1) barrier environments; (2) abandoned channel environments; and (3) estuarine/lagoonal environments. The barrier-associated environment includes tidal inlet channel, inlet beach face, flood-tidal delta, ebb-tidal delta, spit, backspit and aeolian dune facies. The abandoned channel environment comprises washover fan, tidal creek tidal creek delta and back-barrier lagoon facies. The estuarine/lagoonal environment includes subtidal estuarine channel, side-attached bar, channel margin, mangrove fringe and channel island facies. Each sedimentary facies is characterised by sedimentary and biogenic structures, grain-size and sedimentary processes. Vertical facies sequences produced by inlet channel migration and lagoonal infilling are sufficiently distinct to be recognized in the geological record and are typical of a prograding shoreline.

  13. Hydraulic and sedimentary processes causing anastomosing morphology of the upper Columbia River, British Columbia, Canada

    NARCIS (Netherlands)

    Makaske, B.; Smith, D.G.; Berendsen, H.J.A.; Boer, de A.G.; Nielen-Kiezebrink, van M.F.; Locking, T.


    The upper Columbia River, British Columbia, Canada, shows typical anastomosing morphology - multiple interconnected channels that enclose floodbasins - and lateral channel stability We analysed field data on hydraulic and sedimentary processes and show that the anastomosing morphology of the upper

  14. Elemental geochemistry of sedimentary rocks at Yellowknife Bay, Gale crater, Mars. (United States)

    McLennan, S M; Anderson, R B; Bell, J F; Bridges, J C; Calef, F; Campbell, J L; Clark, B C; Clegg, S; Conrad, P; Cousin, A; Des Marais, D J; Dromart, G; Dyar, M D; Edgar, L A; Ehlmann, B L; Fabre, C; Forni, O; Gasnault, O; Gellert, R; Gordon, S; Grant, J A; Grotzinger, J P; Gupta, S; Herkenhoff, K E; Hurowitz, J A; King, P L; Le Mouélic, S; Leshin, L A; Léveillé, R; Lewis, K W; Mangold, N; Maurice, S; Ming, D W; Morris, R V; Nachon, M; Newsom, H E; Ollila, A M; Perrett, G M; Rice, M S; Schmidt, M E; Schwenzer, S P; Stack, K; Stolper, E M; Sumner, D Y; Treiman, A H; VanBommel, S; Vaniman, D T; Vasavada, A; Wiens, R C; Yingst, R A


    Sedimentary rocks examined by the Curiosity rover at Yellowknife Bay, Mars, were derived from sources that evolved from an approximately average martian crustal composition to one influenced by alkaline basalts. No evidence of chemical weathering is preserved, indicating arid, possibly cold, paleoclimates and rapid erosion and deposition. The absence of predicted geochemical variations indicates that magnetite and phyllosilicates formed by diagenesis under low-temperature, circumneutral pH, rock-dominated aqueous conditions. Analyses of diagenetic features (including concretions, raised ridges, and fractures) at high spatial resolution indicate that they are composed of iron- and halogen-rich components, magnesium-iron-chlorine-rich components, and hydrated calcium sulfates, respectively. Composition of a cross-cutting dike-like feature is consistent with sedimentary intrusion. The geochemistry of these sedimentary rocks provides further evidence for diverse depositional and diagenetic sedimentary environments during the early history of Mars.

  15. Sedimentary and tectonic evolution of the southern Qiangtang basin: Implications for the Lhasa-Qiangtang collision timing (United States)

    Ma, Anlin; Hu, Xiumian; Garzanti, Eduardo; Han, Zhong; Lai, Wen


    The Mesozoic stratigraphic record of the southern Qiangtang basin in central Tibet records the evolution and closure of the Bangong-Nujiang ocean to the south. The Jurassic succession includes Toarcian-Aalenian shallow-marine limestones (Quse Formation), Aalenian-Bajocian feldspatho-litho-quartzose to feldspatho-quartzo-lithic sandstones (shallow-marine Sewa Formation and deep-sea Gaaco Formation), and Bathonian outer platform to shoal limestones (Buqu Formation). This succession is truncated by an angular unconformity, overlain by upper Bathonian to lower Callovian fan-delta conglomerates and litho-quartzose to quartzo-lithic sandstones (Biluoco Formation) and Callovian shoal to outer platform limestones (Suowa Formation). Sandstone petrography coupled with detrital-zircon U-Pb and Hf isotope analysis indicate that the Sewa and Gaaco formations contain intermediate to felsic volcanic detritus and youngest detrital zircons (183-170 Ma) with ɛHf(t) ranging widely from +13 to -25, pointing to continental-arc provenance from igneous rocks with mixed mantle and continental-crust contributions. An arc-trench system thus developed toward the end of the Early Jurassic, with the southern Qiangtang basin representing the fore-arc basin. Above the angular unconformity, the Biluoco Formation documents a change to dominant sedimentary detritus including old detrital zircons (mainly >500 Ma ages in the lower part of the unit) with age spectra similar to those from Paleozoic strata in the central Qiangtang area. A major tectonic event with intense folding and thrusting thus took place in late Bathonian time (166 ± 1 Ma), when the Qiangtang block collided with another microcontinental block possibly the Lhasa block.

  16. Accurate thickness measurement of graphene

    International Nuclear Information System (INIS)

    Shearer, Cameron J; Slattery, Ashley D; Stapleton, Andrew J; Shapter, Joseph G; Gibson, Christopher T


    Graphene has emerged as a material with a vast variety of applications. The electronic, optical and mechanical properties of graphene are strongly influenced by the number of layers present in a sample. As a result, the dimensional characterization of graphene films is crucial, especially with the continued development of new synthesis methods and applications. A number of techniques exist to determine the thickness of graphene films including optical contrast, Raman scattering and scanning probe microscopy techniques. Atomic force microscopy (AFM), in particular, is used extensively since it provides three-dimensional images that enable the measurement of the lateral dimensions of graphene films as well as the thickness, and by extension the number of layers present. However, in the literature AFM has proven to be inaccurate with a wide range of measured values for single layer graphene thickness reported (between 0.4 and 1.7 nm). This discrepancy has been attributed to tip-surface interactions, image feedback settings and surface chemistry. In this work, we use standard and carbon nanotube modified AFM probes and a relatively new AFM imaging mode known as PeakForce tapping mode to establish a protocol that will allow users to accurately determine the thickness of graphene films. In particular, the error in measuring the first layer is reduced from 0.1–1.3 nm to 0.1–0.3 nm. Furthermore, in the process we establish that the graphene-substrate adsorbate layer and imaging force, in particular the pressure the tip exerts on the surface, are crucial components in the accurate measurement of graphene using AFM. These findings can be applied to other 2D materials. (paper)

  17. Record of continental to marine transition from the Mesoproterozoic Ampani basin, Central India: An exercise of process-based sedimentology in a structurally deformed basin (United States)

    Chakraborty, Partha Pratim; Saha, Subhojit; Das, Kaushik


    The Mesoproterozoic Ampani Group of rocks, a structurally deformed sedimentary package hosted within the Bastar Craton in central India, was studied for process-based facies and paleoenvironmental analyses. Outcrop mapping on 1:1500 scale, deconvolution of deformation pattern, and process-based facies analyses have led to the identification of fifteen facies types, clubbed under four facies associations. A range of paleoenvironmental settings varying from continental fluvial to distal marine shelf is inferred. Deductive paleohydrology revealed poorly-efficient 'dirty river' character for the Ampani River system with low water discharge. However, at times of catastrophic sheet floods release of sediments trapped at the river mouth in form of hyperpycnal underflows triggered formation of river mouth delta. Reworking of delta front sediment in wave-dominated coastline resulted development of beach-foreshore and shoreface (proximal to distal). Variation in the relative proportion of bar and interbar products within the shoreface successions exposed at different studied sections is interpreted as signature of relative bathymetric variation. The pro-deltaic Ampani shelf was storm infested. Tectonic perturbance in the basin hinterland in course of Ampani sedimentation is inferred from occurrence of a disparately thick lobate high-density flow deposit towards the top of shoreface succession and increase in feldspar content upward within the shoreface succession. Addition of detritus from a ∼1600 Ma Mesoproterozoic provenance in upper part of shoreface also strengthen the contention. Deconvolution of deformation pattern and delineation of environmental products ranging between continental and deep marine allowed us to infer the Ampani sediment package as fining-upward in character evolved in a transgressive mode.

  18. Marine Mammal Protection Act (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Marine Mammal Protection Act (MMPA or Act) prohibits, with certain exceptions, the "take" of marine mammals in U.S. waters and by U.S. citizens on the high seas,...

  19. Marine gamma spectrometric survey

    International Nuclear Information System (INIS)

    Kostoglodov, V.V.


    Presented are theoretical problems physical and geochemical prerequisites and possibilities of practical application of the method of continuous submarine gamma-spectrometric survey and radiometric survey destined for rapid study of the surface layer of marine sediments. Shown is high efficiency and advantages of this method in comparison with traditional and widely spread in marine geology methods of bottom sediments investigation

  20. Marine palynology in progress

    NARCIS (Netherlands)

    Manten, A.A.


    One of the things which the Second International Conference on Palynology (held in Utrecht, August 29-September 3, 1966) revealed, was the rapid expansion which marine palynological research has undergone in recent years. This was the main stimulus to organize this special issue of Marine

  1. Soliton models for thick branes

    International Nuclear Information System (INIS)

    Peyravi, Marzieh; Riazi, Nematollah; Lobo, Francisco S.N.


    In this work, we present new soliton solutions for thick branes in 4+1 dimensions. In particular, we consider brane models based on the sine-Gordon (SG), φ 4 and φ 6 scalar fields, which have broken Z 2 symmetry in some cases and are responsible for supporting and stabilizing the thick branes. The origin of the symmetry breaking in these models resides in the fact that the modified scalar field potential may have non-degenerate vacua. These vacua determine the cosmological constant on both sides of the brane. We also study the geodesic equations along the fifth dimension, in order to explore the particle motion in the neighborhood of the brane. Furthermore, we examine the stability of the thick branes, by determining the sign of the w 2 term in the expansion of the potential for the resulting Schroedinger-like equation, where w is the five-dimensional coordinate. It turns out that the φ 4 brane is stable, while there are unstable modes for certain ranges of the model parameters in the SG and φ 6 branes. (orig.)

  2. Soliton models for thick branes

    Energy Technology Data Exchange (ETDEWEB)

    Peyravi, Marzieh [Ferdowsi University of Mashhad, Department of Physics, School of Sciences, Mashhad (Iran, Islamic Republic of); Riazi, Nematollah [Shahid Beheshti University, Physics Department, Tehran (Iran, Islamic Republic of); Lobo, Francisco S.N. [Faculdade de Ciencias da Universidade de Lisboa, Instituto de Astrofisica e Ciencias do Espaco, Lisbon (Portugal)


    In this work, we present new soliton solutions for thick branes in 4+1 dimensions. In particular, we consider brane models based on the sine-Gordon (SG), φ{sup 4} and φ{sup 6} scalar fields, which have broken Z{sub 2} symmetry in some cases and are responsible for supporting and stabilizing the thick branes. The origin of the symmetry breaking in these models resides in the fact that the modified scalar field potential may have non-degenerate vacua. These vacua determine the cosmological constant on both sides of the brane. We also study the geodesic equations along the fifth dimension, in order to explore the particle motion in the neighborhood of the brane. Furthermore, we examine the stability of the thick branes, by determining the sign of the w{sup 2} term in the expansion of the potential for the resulting Schroedinger-like equation, where w is the five-dimensional coordinate. It turns out that the φ{sup 4} brane is stable, while there are unstable modes for certain ranges of the model parameters in the SG and φ{sup 6} branes. (orig.)

  3. Marine pollution effects on the southern surf crab Ovalipes trimaculatus (Crustacea: Brachyura: Polybiidae) in Patagonia Argentina. (United States)

    Lezcano, Aníbal Hernán; Rojas Quiroga, María Laura; Liberoff, Ana Laura; Van der Molen, Silvina


    We compared the carapace shape and thickness as well as the energy density of Ovalipes trimaculatus inhabiting areas comprising a gradient of marine pollution: high, moderate and undetected, in the Nuevo gulf (Patagonia Argentina). The carapace shape was evaluated by means of individual asymmetry scores (=fluctuating asymmetry) whereas the carapace thickness was assessed by measuring the carapace dry weight. The energy density was analyzed through its negative relationship with water content in muscle tissue. The individual asymmetry scores as well as the percentage of water content in muscle tissue were proportional to the marine pollution gradient, whereas the carapaces thickness did not differ among sampling sites. Our results are consistent with previous findings and demonstrate the direct effect of marine pollution on other taxa different from gastropods, cephalopods and polyplacophora and add to long-standing concerns about detrimental effects caused by marine pollution on the benthic community of the Nuevo gulf. Copyright © 2014 Elsevier Ltd. All rights reserved.

  4. High Performance Marine Vessels

    CERN Document Server

    Yun, Liang


    High Performance Marine Vessels (HPMVs) range from the Fast Ferries to the latest high speed Navy Craft, including competition power boats and hydroplanes, hydrofoils, hovercraft, catamarans and other multi-hull craft. High Performance Marine Vessels covers the main concepts of HPMVs and discusses historical background, design features, services that have been successful and not so successful, and some sample data of the range of HPMVs to date. Included is a comparison of all HPMVs craft and the differences between them and descriptions of performance (hydrodynamics and aerodynamics). Readers will find a comprehensive overview of the design, development and building of HPMVs. In summary, this book: Focuses on technology at the aero-marine interface Covers the full range of high performance marine vessel concepts Explains the historical development of various HPMVs Discusses ferries, racing and pleasure craft, as well as utility and military missions High Performance Marine Vessels is an ideal book for student...

  5. Constraints on oceanic N balance/imbalance from sedimentary 15N records

    Directory of Open Access Journals (Sweden)

    M. A. Altabet


    Full Text Available According to current best estimates, the modern ocean's N cycle is in severe deficit. N isotope budgeting provides an independent geochemical constraint in this regard as well as the only means for past reconstruction. Overall, it is the relative proportion of N2 fixation consumed by water column denitrification that sets average oceanic δ15N under steady-state conditions. Several factors (conversion of organic N to N2, Rayleigh closed and open system effects likely reduce the effective fractionation factor (ε for water column denitrification to about half the inherent microbial value for εden. If so, the average oceanic δ15N of ~5‰ is consistent with a canonical contribution from water column denitrification of 50% of the source flux from N2 fixation. If an imbalance in oceanic N sources and sinks changes this proportion then a transient in average oceanic δ15N would occur. Using a simple model, changing water column denitrification by ±30% or N2 fixation by ±15% produces detectable (>1‰ changes in average oceanic δ15N over one residence time period or more with corresponding changes in oceanic N inventory. Changing sedimentary denitrification produces no change in δ15N but does change N inventory. Sediment δ15N records from sites thought to be sensitive to oceanic average δ15N all show no detectible change over the last 3 kyr or so implying a balanced marine N budget over the latest Holocene. A mismatch in time scales is the most likely meaningful interpretation of the apparent conflict with modern flux estimates. Decadal to centennial scale oscillations between net N deficit and net surplus may occur but on the N residence timescale of several thousand years, net balance is achieved in sum. However, sediment δ15N records from the literature covering the period since the last glacial maximum show excursions of up to several ‰ that are consistent with sustained N deficit during the deglaciation followed by readjustment

  6. Hydrocarbon potential, palynology and palynofacies of four sedimentary basins in the Benue Trough, northern Cameroon (United States)

    Bessong, Moïse; Hell, Joseph Victor; Samankassou, Elias; Feist-Burkhardt, Susanne; Eyong, John Takem; Ngos, Simon, III; Nolla, Junior Désiré; Mbesse, Cecile Olive; Adatte, Thierry; Mfoumbeng, Marie Paule; Dissombo, Edimo André Noel; Ntsama, Atangana Jacqueline; Mouloud, Bennami; Ndjeng, Emmanuel


    Organic geochemical, palynological and palynofacies analyses were carried out on 79 selected samples from four sedimentary basins (Mayo-Rey, Mayo-Oulo-Lere, Hamakoussou and Benue) in northern Cameroon. Rock-Eval pyrolysis and Total Organic Carbon results indicate that most of the samples of the studied basins are thermally immature to mature. The organic matter consists of terrestrial components (peat, lignite, bituminous coal, and anthracite) associated with organic matter of marine origin. Based on the appraisal of multiple parameters: Total Organic Carbon (TOC), maximum Temperature (T-max), Hydrogen Index (HI), Oxygen Index (OI) and Production Index (PI), some samples are organically rich both in oil and/or gas-prone kerogen Type-II, II/III and III. The source rock quality ranges from poor to very good. The source material is composed of both algae and higher plants. Samples from these basins yielded palynological residue composed of translucent and opaque phytoclasts, Amorphous Organic Matter (AOM), fungal remains, algal cysts pollen and pteridophyte spores. Abundance and diversity of the palynomorphs overall low and include Monoporopollenites annulatus (= Monoporites annulatus), indeterminate periporate pollen, indeterminate tetracolporate pollen, indeterminate tricolporate pollen, indeterminate triporate pollen, indeterminate trilete spores, Polypodiaceoisporites spp., Biporipsilonites sp., Rhizophagites sp., Striadiporites sp., Botryococcus sp. (colonial, freshwater green algae), and Chomotriletes minor (cyst of zygnematalean freshwater green algae). Age assigned confidently for all these basins the palynological data except for one sample of Hamakoussou that can be dated as Early to Mid-Cretaceous in age. Callialasporites dampieri, Classopollis spp., Eucommiidites spp. and Araucariacites australis indicate, an Aptian to Cenomanian age. The other pollen and spores recovered may indicate a Tertiary or younger age (especially Monoporopollenites annulatus), or

  7. Satellite images survey for the identification of the coastal sedimentary system changes and associated vulnerability along the western bay of the Gulf of Tunis (northern Africa) (United States)

    Hzami, Abderraouf; Amrouni, Oula; Romanescu, Gheorghe; Constantin Stoleriu, Cristian; Mihu-Pintilie, Alin; Saâdi, Abdeljaouad


    The aim of this study consists in testing the effectiveness of satellite data in order to monitoring shoreline and sedimentary features changes, especially the rapidly changing of Gulf of Tunis coast. The study area is located in the Gulf of Tunis western bay (Southern Mediterranean Sea) which is characterized by sandy beaches of Ghar Melah and Raoued (Medjerda Delta area). The aerial photographs and satellite imageries were used for mapping the evolution of shoreline. Diachronic data (satellite imagery, aerial photography and topographic maps) were used to monitor and to quantify, the evolution of the coastal areas. These thematic data were digitally overlaid and vectorised for highlighting the shoreline changes between 1936 and 2016, in order to map the rate of erosion and accretion along the shoreline. Results show that the accretion and degradation are related to the Medjerda: change of outlet in 1973 and impoundment of the Sidi Salem dam in 1982. We found that the general trend of the coastal geomorphic processes can be monitored with satellite imageries (such as Sentinel A2, Spots 4 and 5), due to its repetitive coverage along the time and their high quality concerning the spectral contrast between land and sea areas. Improved satellite imageries with high resolution should be a valuable tool for complementing traditional methods for mapping and assessing the sedimentary structures (such as shoreline, delta, marine bars), and monitoring especially the lowlands coastal areas (slightly eroded).

  8. Understanding and analyzing the hydro-sedimentary processes in the Bay of Toulon. Contribution for modelling the dispersion of radionuclides

    International Nuclear Information System (INIS)

    Dufresne, Christiane


    This doctoral research aims to enhance knowledge of the hydro-sedimentary processes in the Bay of Toulon and to represent these processes through a post accidental managing tool, developed to simulate the dispersion of radionuclides. This work is based on a multidisciplinary strategy, using numerical modelling and in situ measurements to study the complex problem of contaminants in the marine environment. Hydrodynamic of the Bay and water mass exchanges through the channel have been studied. Results are highly linked to the atmospheric conditions and the water exchange times of the Little Bay range from two to six days, depending on wind conditions. Recorded data in the Las and Eygoutier Rivers led to the description and the estimation of the catchment yields to the Bay, poorly studied before. With one ton of particulate matter annually discharged by the Las River, the Little Bay seems to be a sedimentation area. In case of accidental release of radionuclides, this area appears to be a trapping zone. (author)

  9. The Punta del Este terrain and its volcano sedimentary cover, metamorphic and sedimentary: geology, geochemistry and geochronology

    International Nuclear Information System (INIS)

    Preciozzi, F.


    Gariep belt it develops over the West Africa coastal region of Namibia underlying on Namaqua metamorphic complex.It characterized by supra crustal rocks affected for a very low to low metamorphism and in two tecto no-stratigraphic units identified by Base i et al 2005 showing that sediments of Formation Rocha in Uruguay and the Group Oranjemund Gariep in S E Africa have similar ages in the provenance of the zircons, suggesting that they were probably deposited in the same basin. This unit exhibits detrital zircons around 600my, sedimentation and metamorphism and deformación occur in a narrow time interval from 600-610 to 574 m (Granite de Castillo intrusion) .Cam pal et al, 2005 proposed to the Cerros Aguirre Formation similar in a range of age of different events. To the east separated from the Punta del Este Terrane –Pelotas. Aigua .Florianopolis batholith s by the shear zone Alferez Cordillera (Preciozzi et al. 1999, Basei et al. 2000) Another option develops this granitic belt is an integral part of Land Punta del Este Terrane(Preciozzi in this work), being deployed on a thin cratonic granite edge. The climax of the post-brasilian magmatism is 580my, strongly related to trans current movements (eg shear zones Major Gercino-Alferez- Cordillera and Sierra Ballena.In South America an old west domain is formed by the Piedra Alta Terrane which integrate the Río de la Pl ata Craton, a central domain intensely reworked by Neoproterozoic events known so far as Nico Perez . The primary coverage is integrated by two volcano-sedimentary basins (San Carlos Formation and Cerros de Aguirre Formation)In this study are considered the Geology,Geochemistry and Geochronology of the different units of Rocha Formation

  10. EGS in sedimentary basins: sensitivity of early-flowback tracer signals to induced-fracture parameters (United States)

    Karmakar, Shyamal; Ghergut, Julia; Sauter, Martin


    -effective aperture, in a water fracture (WF), or - fracture thickness and porosity, for a gel-proppant fracture (GPF). We find that parameter determination from SW early signals can significantly be improved by concomitantly using a number of solute tracers with different transport and retardation behaviour. We considered tracers of different sorptivity to proppant coatings, and to matrix rock surfaces, for GPF, as well as contrasting-diffusivity or -sorptivity tracers, for WF. An advantage of this SW approach is that it requires only small chaser volumes (few times the fracture volume), not relying on advective penetration into the rock matrix. Thus, selected tracer species are to be injected during the very last stage of the fracturing process, when fracture sizes and thus target parameters are supposed to attain more or less stable values. We illustrate the application of these tracer test design principles using hydro- and lithostratigraphy data from the Geothermal Research Platform at Groß Schönebeck [4], targeting a multi-layer reservoir (sedimentary and crystalline formations in 4-5 km depth) in the NE-German Sedimentary Basin. Acknowledgments: This work benefited from long-term support from Baker Hughes (Celle) and from the Lower-Saxonian Science and Culture Ministry (MWK Niedersachsen) within the applied research project gebo (Geothermal Energy and High-Performance Drilling, 2009-2014). The first author gratefully acknowledges continued financial support from the DAAD (German Academic Exchange Service) to pursuing Ph. D. work. References: [1] [2] [3] [4]

  11. Marine Viruses: Key Players in Marine Ecosystems

    Directory of Open Access Journals (Sweden)

    Mathias Middelboe


    Full Text Available Viruses were recognized as the causative agents of fish diseases, such as infectious pancreatic necrosis and Oregon sockeye disease, in the early 1960s [1], and have since been shown to be responsible for diseases in all marine life from bacteria to protists, mollusks, crustaceans, fish and mammals [2].[...

  12. Organic geochemistry of the Dongsheng sedimentary uranium ore deposits, China

    International Nuclear Information System (INIS)

    Tuo Jincai; Ma Wanyun; Zhang Mingfeng; Wang Xianbin


    Organic matter (OM) associated with the Dongsheng sedimentary U ore hosting sandstone/siltstone was characterized by Rock-Eval, gas chromatography-mass spectrometry and stable C isotope analysis and compared to other OM in the sandstone/siltstone interbedded organic matter-rich strata. The OM in all of the analyzed samples is Type III with Ro less than 0.6%, indicating that the OM associated with these U ore deposits can be classified as a poor hydrocarbon source potential for oil and gas. n-Alkanes in the organic-rich strata are characterized by a higher relative abundance of high-molecular-weight (HMW) homologues and are dominated by C 25 , C 27 or C 29 with distinct odd-to-even C number predominances from C 23 to C 29 . In contrast, in the sandstone/siltstone samples, the n-alkanes have a higher relative abundance of medium-molecular-weight homologues and are dominated by C 22 with no or only slight odd-to-even C number predominances from C 23 to C 29 . Methyl alkanoates in the sandstone/siltstone extracts range from C 14 to C 30 , maximizing at C 16 , with a strong even C number predominance, but in the organic-rich layers the HMW homologues are higher, maximizing at C 24 , C 26 or C 28 , also with an even predominance above C 22 . n-Alkanes in the sandstone/siltstone sequence are significantly depleted in 13 C relative to n-alkanes in most of the organic-rich strata. Diasterenes, ββ-hopanes and hopenes are present in nearly all the organic-rich sediments but in the sandstone/siltstone samples they occur as the geologically mature isomers. All the results indicate that the OM in the Dongsheng U ore body is derived from different kinds of source materials. The organic compounds in the organic-rich strata are mainly terrestrial, whereas, in the sand/siltstones, they are derived mainly from aquatic biota. Similar distribution patterns and consistent δ 13 C variations between n-alkanes and methyl alkanoates in corresponding samples suggest they are derived from

  13. Inverse geothermal modelling applied to Danish sedimentary basins (United States)

    Poulsen, Søren E.; Balling, Niels; Bording, Thue S.; Mathiesen, Anders; Nielsen, Søren B.


    This paper presents a numerical procedure for predicting subsurface temperatures and heat-flow distribution in 3-D using inverse calibration methodology. The procedure is based on a modified version of the groundwater code MODFLOW by taking advantage of the mathematical similarity between confined groundwater flow (Darcy's law) and heat conduction (Fourier's law). Thermal conductivity, heat production and exponential porosity-depth relations are specified separately for the individual geological units of the model domain. The steady-state temperature model includes a model-based transient correction for the long-term palaeoclimatic thermal disturbance of the subsurface temperature regime. Variable model parameters are estimated by inversion of measured borehole temperatures with uncertainties reflecting their quality. The procedure facilitates uncertainty estimation for temperature predictions. The modelling procedure is applied to Danish onshore areas containing deep sedimentary basins. A 3-D voxel-based model, with 14 lithological units from surface to 5000 m depth, was built from digital geological maps derived from combined analyses of reflection seismic lines and borehole information. Matrix thermal conductivity of model lithologies was estimated by inversion of all available deep borehole temperature data and applied together with prescribed background heat flow to derive the 3-D subsurface temperature distribution. Modelled temperatures are found to agree very well with observations. The numerical model was utilized for predicting and contouring temperatures at 2000 and 3000 m depths and for two main geothermal reservoir units, the Gassum (Lower Jurassic-Upper Triassic) and Bunter/Skagerrak (Triassic) reservoirs, both currently utilized for geothermal energy production. Temperature gradients to depths of 2000-3000 m are generally around 25-30 °C km-1, locally up to about 35 °C km-1. Large regions have geothermal reservoirs with characteristic temperatures

  14. Depositional environment and sedimentary of the basinal sediments in the Eibiswalder Bucht (Radl Formation and Lower Eibiswald Beds), Miocene Western Styrian Basin, Austria (United States)

    Stingl, K.


    The Eibiswald Bucht is a small subbasin of the Western Styrian Basin exposing sediments of Lower Miocene age. In the past the entire sequence exposed in the Eibiswalder Bucht has been interpreted as being of fluvial/lacustrine origin; here, results are presented of detailed sedimentological investigations that lead to a revision of this concept. The lowermost siliciclastic sedimentary unit of the Eibiswalder Bucht sequence is the Radl Formation. It is overlain by the Eibiswald Beds, which are subdivided into the Lower, Middle and Upper Eibiswald Beds. The Radl Formation and the Lower Eibiswald Beds are interpreted as a fan delta complex deposited along NNW-SSE striking faults. Based on the sedimentary facies this fan delta can be subdivided into a subaerial alluvial fan facies group, a proximal delta facies group and a distal delta/prodelta facies group. The Radl Formation comprises the alluvial fan and proximal delta facies groups, the Lower Eibiswald Beds the distal delta/prodelta facies group. The alluvial fan and the proximal delta consist of diverse deposits of gravelly flows. The distal delta/prodelta consists of wave-reworked, bioturbated, low density turbidites intercalated with minor gravelly mass flows. The prodelta can be regarded as as the basin facies of the small and shallow Eibiswalder Bucht, where marine conditions prevailed. The basin was probably in part connected with the Eastern Styrian Basin, the contemporary depositional environment of the Styrian Schlier (mainly turbiditic marine offshore sediments in the Eastern Styrian Basin). Analysis of the clast composition, in conjunction with the paleotransport direction of the coarse delta mass flows of the Radl Formation, shows that the source rocks were exclusively crystalline rocks ranging from greenschists to eclogites.

  15. Contribution of deep sourced carbon from hydrocarbon seeps to sedimentary organic carbon: Evidence from Δ14C and δ13C isotopes (United States)

    Feng, D.; Peckmann, J.; Peng, Y.; Liang, Q.; Roberts, H. H.; Chen, D.


    Sulfate-driven anaerobic oxidation of methane (AOM) limits the release of methane from marine sediments and promotes the formation of carbonates close to the seafloor along continental margins. It has been established that hydrocarbon seeps are a source of dissolved inorganic and organic carbon to marine environments. However, questions remain about the contribution of deep sourced carbon from hydrocarbon seeps to the sedimentary organic carbon pool. For a number of hydrocarbon seeps from the South China Sea and the Gulf of Mexico, the portion of modern carbon was determined based on natural radiocarbon abundances (Δ14C) and stable carbon isotope (δ13Corganic carbon) compositions of the non-carbonate fractions extracted from authigenic carbonates. Samples from both areas show a mixing trend between ideal planktonic organic carbon (δ13C = -22‰ VPDB and 90% modern carbon) and the ambient methane. The δ13Corganic carbon values of non-carbonate fractions from three ancient seep deposits (northern Italy, Miocene; western Washington State, USA, Eocene to Oligocene) confirm that the proxy can be used to constrain the record of sulfate-driven AOM through most of Earth history by measuring the δ13C values of organic carbon. This study reveals the potential of using δ13C values of organic carbon to discern seep and non-seep environments. This new approach is particularly promising when authigenic carbonate is not present in ancient sedimentary environments. Acknowledgments: The authors thank BOEM and NOAA for their years' support of the deep-sea dives. Funding was provided by the NSF of China (Grants: 41422602 and 41373085).

  16. Sedimentary Record of the Back-Arc Basins of South-Central Mexico: an Evolution from Extensional Basin to Carbonate Platform. (United States)

    Sierra-Rojas, M. I.; Molina-Garza, R. S.; Lawton, T. F.


    The Lower Cretaceous depositional systems of southwestern Oaxaquia, in south-central Mexico, were controlled by tectonic processes related to the instauration of a continental arc and the accretion of the Guerrero arc to mainland Mexico. The Atzompa Formation refers to a succession of conglomerate, sandstone, siltstone, and limestone that crop out in southwestern Mexico with Early Cretaceous fauna and detrital zircon maximum depositional ages. The sedimentary record shows a transition from early fluvial/alluvial to shallow marine depositional environments. The first stage corresponds to juvenile fluvial/alluvial setting followed by a deep lacustrine depositional environment, suggesting the early stages of an extensional basin. The second stage is characterized by anabranched deposits of axial fluvial systems flowing to the NE-SE, showing deposition during a period of rapid subsidence. The third and final stage is made of tidal deposits followed, in turn, by abrupt marine flooding of the basin and development of a Barremian-Aptian carbonate ramp. We interpret the Tentzo basin as a response to crustal extension in a back-arc setting, with high rates of sedimentation in the early stages of the basin (3-4 mm/m.y), slower rates during the development of starved fluvial to tidal systems and carbonate ramps, and at the top of the Atzompa Formation an abrupt deepening of the basin due to flexural subsidence related to terrane docking and attendant thrusting to the west. These events were recorded in the back-arc region of a continental convergent margin (Zicapa arc) where syn-sedimentary magmatism is indicated by Early Cretaceous detrital and volcanic clasts from alluvial fan facies west of the basin. Finally, and as a response to the accretion of the Guerrero superterrane to Oaxaquia during the Aptian, a carbonate platform facing toward the Gulf of Mexico was established in central to eastern Oaxaquia.

  17. Evolution of coastal and marine environments during the Holocene transgression. Ría de Vigo (Galicia, Spain). (United States)

    Clemente, F.; Pérez-Arlucea, M.; Méndez, G.; Francés, G.; Alejo, I.; González, D.; Nombela, M.


    Coastal deposits are not prominent in the Ria de Vigo, high cliffs dominate the coast line, but several well-preserved sedimentary areas are observed. Beach and aeolian sand dunes are preserved in protected bays along margins between low cliffs, as Playa America, Patos and Samil. Several rivers form prominent estuaries such as the Verdugo-Oitaven, the Minor and the Lagares. Tidal flats are well preserved in the San Simon embayment and small areas of tidal flats and marshes can be found elsewhere associated with estuaries and protected by sandy spits as the Ramallosa tidal Complex, Moaña and San Simón. Four sedimentary areas were selected to study vertical sediment distribution. 6 cores were obtained. Sediment thicknesses range between 4.0m and 26.0 m. Vertical sediment distributions show 6 different lithologic units from basal fluvial (A), estuarine (B), tidal flat and peat fens (C), muddy subtidal bay (D), estuarine (E) and beach barrier (F). 10 14C age determinations were obtained from the longest core (Ladeira N) located at the Ramallosa beach barrier-lagoon complex. The oldest sample located at 22 m yields an age of 8177 y. BP in unit (B) allowing to constrain most of sediment evolution in the holocene transgressive context. The lower unit (A) composed mainly of fluvial gravels, and deposited in a palaeovalley, is attributed to the Younger Dryas although the LST could be also represented in these deposits. Units B, C and D configure the TST showing an initial rapid increase in water depth at 8177 y. BP and subsequent shallowing conditions due to progressive aggradation until 4809 y BP. Units E and F mark the HST eustatic stage being characterised by progradational shallow marine conditions and beach barrier progressive enclosing of the complex. Sedimentation rates were calculated at 7 intervals. An upward decrease is observed from 8177 y BP to 2001 y. BP, followed by a strong sudden increase, mostly in the last 500 years. Hydrology and geomorphology of river

  18. The crustal thickness of Australia (United States)

    Clitheroe, G.; Gudmundsson, O.; Kennett, B.L.N.


    We investigate the crustal structure of the Australian continent using the temporary broadband stations of the Skippy and Kimba projects and permanent broadband stations. We isolate near-receiver information, in the form of crustal P-to-S conversions, using the receiver function technique. Stacked receiver functions are inverted for S velocity structure using a Genetic Algorithm approach to Receiver Function Inversion (GARFI). From the resulting velocity models we are able to determine the Moho depth and to classify the width of the crust-mantle transition for 65 broadband stations. Using these results and 51 independent estimates of crustal thickness from refraction and reflection profiles, we present a new, improved, map of Moho depth for the Australian continent. The thinnest crust (25 km) occurs in the Archean Yilgarn Craton in Western Australia; the thickest crust (61 km) occurs in Proterozoic central Australia. The average crustal thickness is 38.8 km (standard deviation 6.2 km). Interpolation error estimates are made using kriging and fall into the range 2.5-7.0 km. We find generally good agreement between the depth to the seismologically defined Moho and xenolith-derived estimates of crustal thickness beneath northeastern Australia. However, beneath the Lachlan Fold Belt the estimates are not in agreement, and it is possible that the two techniques are mapping differing parts of a broad Moho transition zone. The Archean cratons of Western Australia appear to have remained largely stable since cratonization, reflected in only slight variation of Moho depth. The largely Proterozoic center of Australia shows relatively thicker crust overall as well as major Moho offsets. We see evidence of the margin of the contact between the Precambrian craton and the Tasman Orogen, referred to as the Tasman Line. Copyright 2000 by the American Geophysical Union.

  19. Coupled C-S-Fe geochemistry in a rapidly accumulating marine sedimentary system: Diagenetic and depositional implications

    Digital Repository Service at National Institute of Oceanography (India)

    Peketi, A.; Mazumdar, A.; Joao, H.M.; Patil, D.J.; Usapkar, A.; Dewangan, P.

    on sulfidization Coupled occurrence of 34S-enriched iron sulfide (pyrite) with 12C-enriched authigenic carbonate zones is the possible records of paleo-sulfate methane transition zones where AOM-driven-focused sulfate reduction was likely...

  20. Geology and recognition criteria for sandstone uranium deposits in mixed fluvial-shallow marine sedimentary sequences, South Texas. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Adams, S.S.; Smith, R.B.


    Uranium deposits in the South Texas Uranium Region are classical roll-type deposits that formed at the margin of tongues of altered sandstone by the encroachment of oxidizing, uraniferous solutions into reduced aquifers containing pyrite and, in a few cases, carbonaceous plant material. Many of the uranium deposits in South Texas are dissimilar from the roll fronts of the Wyoming basins. The host sands for many of the deposits contain essentially no carbonaceous plant material, only abundant disseminated pyrite. Many of the deposits do not occur at the margin of altered (ferric oxide-bearing) sandstone tongues but rather occur entirely within reduced, pyurite-bearing sandstone. The abundance of pyrite within the sands probably reflects the introduction of H/sub 2/S up along faults from hydrocarbon accumulations at depth. Such introductions before ore formation prepared the sands for roll-front development, whereas post-ore introductions produced re-reduction of portions of the altered tongue, leaving the deposit suspended in reduced sandstone. Evidence from three deposits suggests that ore formation was not accompanied by the introduction of significant amounts of H/sub 2/S.

  1. Natural sulfurization of carbohydrates in marine sediments : consequences for the chemical and carbon isotopic composition of sedimentary organic matter

    NARCIS (Netherlands)

    Dongen, B.E. van


    Carbohydrates make up the largest part of the organic matter in the biosphere and are used by living organism for many different reasons. They serve, among others, as carbon and energy source as well as metabolic intermediates. Carbohydrates are generally thought to be remineralized during early

  2. Geology and recognition criteria for sandstone uranium deposits in mixed fluvial-shallow marine sedimentary sequences, South Texas. Final report

    International Nuclear Information System (INIS)

    Adams, S.S.; Smith, R.B.


    Uranium deposits in the South Texas Uranium Region are classical roll-type deposits that formed at the margin of tongues of altered sandstone by the encroachment of oxidizing, uraniferous solutions into reduced aquifers containing pyrite and, in a few cases, carbonaceous plant material. Many of the uranium deposits in South Texas are dissimilar from the roll fronts of the Wyoming basins. The host sands for many of the deposits contain essentially no carbonaceous plant material, only abundant disseminated pyrite. Many of the deposits do not occur at the margin of altered (ferric oxide-bearing) sandstone tongues but rather occur entirely within reduced, pyurite-bearing sandstone. The abundance of pyrite within the sands probably reflects the introduction of H 2 S up along faults from hydrocarbon accumulations at depth. Such introductions before ore formation prepared the sands for roll-front development, whereas post-ore introductions produced re-reduction of portions of the altered tongue, leaving the deposit suspended in reduced sandstone. Evidence from three deposits suggests that ore formation was not accompanied by the introduction of significant amounts of H 2 S

  3. Chemostratigraphy of Late Cretaceous deltaic and marine sedimentary rocks from high northern palaeolatitudes in the Nuussuaq Basin, West Greenland

    DEFF Research Database (Denmark)

    Lenniger, Marc; Pedersen, Gunver Krarup; Bjerrum, Christian J.

    The Nuussuaq Basin in the Baffin Bay area in West Greenland formed as a result of the opening of the Labrador Sea in Late Mesozoic to Early Cenozoic times. The first rifting and the development of the Nuussuaq Basin took place during the Early Cretaceous and was followed by a second rifting phase...

  4. Co-variation of crenarchaeol and branched GDGTs in globally-distributed marine and freshwater sedimentary archives

    NARCIS (Netherlands)

    Fietz, S.; Huguet, C.; Bendle, J.; Escala, M.; Gallacher, C.; Herfort, L.; Jamieson, R.; Martínez-Garcia, A.; McClymont, E.L.; Peck, V.L.; Prahl, F.G.; Rossi, S.; Rueda, G.; Sanson-Barrera, A.; Rosell-Melé, A.


    Two major types of glycerol dialkyl glycerol tetraethers (GDGTs) are commonly used in paleoecological and paleoclimatological reconstructions: isoprenoidal and branched GDGTs. In aquatic environments, it was originally assumed that isoprenoidal GDGTs, especially crenarchaeol, derive mainly from

  5. Seawater and marine sidements

    International Nuclear Information System (INIS)

    Eicke, H.F.


    The Deutsches Hydrographisches Institut (DHI) is responsible for monitoring the radioactive substances (such as Cs-137, Cs-134, Sr-90, H-3, Pu-239, Pu-240) in the seawater and marine sediments along the Federal German seacoasts, of the fishing grounds of the Federal German offshore fishery industry, and of marine currents moving towards these fishing grounds. The DHI has been carrying out this task since 1965, activities being placed under the responsibility of the DHI Department for Marine Radioactivity, which since 1960 is a directing centre within the Government's system for environmental radioactivity monitoring. (orig./DG) [de

  6. Marine Mineral Exploration

    DEFF Research Database (Denmark)

    in EEZ areas are fairly unknown; many areas need detailed mapping and mineral exploration, and the majority of coastal or island states with large EEZ areas have little experience in exploration for marine hard minerals. This book describes the systematic steps in marine mineral exploration....... Such exploration requires knowledge of mineral deposits and models of their formation, of geophysical and geochemical exploration methods, and of data evaluation and interpretation methods. These topics are described in detail by an international group of authors. A short description is also given of marine...

  7. Will marine productivity wane? (United States)

    Laufkötter, Charlotte; Gruber, Nicolas


    If marine algae are impaired severely by global climate change, the resulting reduction in marine primary production would strongly affect marine life and the ocean's biological pump that sequesters substantial amounts of atmospheric carbon dioxide in the ocean's interior. Most studies, including the latest generation of Earth system models, project only moderate global decreases in biological production until 2100 (1, 2), suggesting that these concerns are unwarranted. But on page 1139 of this issue, Moore et al. (3) show that this conclusion might be shortsighted and that there may be much larger long-term changes in ocean productivity than previously appreciated.

  8. Repeated fault rupture recorded by paleoenvironmental changes in a wetland sedimentary sequence ponded against the Alpine Fault, New Zealand (United States)

    Clark, K.; Berryman, K. R.; Cochran, U. A.; Bartholomew, T.; Turner, G. M.


    At Hokuri Creek, in south Westland, New Zealand, an 18 m thickness of Holocene sediments has accumulated against the upthrown side of the Alpine Fault. Recent fluvial incision has created numerous exposures of this sedimentary sequence. At a decimetre to metre scale there are two dominant types of sedimentary units: clastic-dominated, grey silt packages, and organic-dominated, light brown peaty-silt units. These units represent repeated alternations of the paleoenvironment due to fault rupture over the past 7000 years. We have located the event horizons within the sedimentary sequence, and identified evidence to support earthquake-driven paleoenvironmental change (rather than climatic variability), and developed a model of paleoenvironmental changes over a typical seismic cycle. To quantitatively characterise the sediments we use high resolution photography, x-ray imaging, magnetic-susceptibility and total carbon analysis. To understand the depositional environment we used diatom and pollen studies. The organic-rich units have very low magnetic susceptibility and density values, with high greyscale and high total carbon values. Diatoms indicate these units represent stable wetland environments with standing water and predominantly in-situ organic material deposition. The clastic-rich units are characterised by higher magnetic susceptibility and density values, with low greyscale and total carbon. The clastic-rich units represent environments of flowing water and deep pond settings that received predominantly catchment-derived silt and sand. The event horizon is located at the upper contact of the organic-rich horizons. The event horizon contact marks a drastic change in hydrologic regime as fault rupture changed the stream base level and there was a synchronous influx of clastic sediment as the catchment responded to earthquake shaking. During the interseismic period the flowing-water environment gradually stabilised and returned to an organic-rich wetland. Such

  9. Study on flow and mass transport through fractured soft sedimentary rocks (Contact research)

    International Nuclear Information System (INIS)

    Shimo, Michito; Kumamoto, Sou; Maekawa, Keisuke


    It is important for safety assessment of HLW geological disposal to evaluate groundwater flow and mass transport in deep underground accurately. Though it is considered that the mass transport in sedimentary rock occurs in pores between grains mainly, fractures of sedimentary rock can be main paths. The objective of this study is to establish a conceptual model for flow and mass transport in fractured soft sedimentary rock. In previous study, a series of laboratory hydraulic and tracer tests and numerical analyses were carried out using sedimentary rock specimens obtained from Koetoi and Wakkanai formation. Single natural fractured cores and rock block specimen were used for the tests and analyses. The results indicated that the matrix diffusion played an important role for mass transport in the fractured soft sedimentary rocks. In this study, the following two tasks were carried out: (1) laboratory hydraulic and tracer experiments of rock cores of Koetoi and Wakkanai formation obtained at HDB-9, HDB-10 and HDB-11 boreholes and a rock block specimen, Wakkanai formation, obtained at an outcrop in the Horonobe area, (2) a numerical study on the conceptual model of flow and mass transport through fractured soft sedimentary rocks. Non-sorbing tracer experiments using naturally fractured cores and rock block specimens were carried out. Pottasium iodide was used as a tracer. The obtained breakthrough curves were interpreted and fitted by using a numerical simulator, and mass transport parameters, such as longitudinal dispersivity, matrix diffusion coefficient, transport aperture, were obtained. Mass transport simulations using a fracture network model, a continuum model and a double porosity model were performed to study the applicability of continuum model and double porosity model for transport in fractured sedimentary rock. (author)

  10. 76 FR 76949 - Marine Mammals (United States)


    ...-XR52 Marine Mammals AGENCY: National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric.... 14534 is requested under the authority of the Marine Mammal Protection Act of 1972, as amended (16 U.S.C. 1361 et seq.), the regulations governing the taking and importing of marine mammals (50 CFR part 216...

  11. 75 FR 68605 - Marine Mammals (United States)


    ...-XX23 Marine Mammals AGENCY: National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric... permit to conduct research on marine mammals. ADDRESSES: The permit and related documents are available... applicant. The requested permit has been issued under the authority of the Marine Mammal Protection Act of...

  12. 77 FR 2512 - Marine Mammals (United States)


    ...-XA905 Marine Mammals AGENCY: National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric... Dorian Houser, Ph.D., National Marine Mammal Foundation, 2240 Shelter Island Drive, 200, San Diego, CA... subject permit is requested under the authority of the Marine Mammal Protection Act of 1972, as amended...

  13. 77 FR 14352 - Marine Mammals (United States)


    ...-XB065 Marine Mammals AGENCY: National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric... Marine Mammal Protection Act of 1972, as amended (16 U.S.C. 1361 et seq.), the regulations governing the taking and importing of marine mammals (50 CFR part 216), the Endangered Species Act of 1973, as amended...

  14. 75 FR 77616 - Marine Mammals (United States)


    .... 14334] Marine Mammals AGENCY: National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric... Marine Mammal Protection Act of 1972, as amended (16 U.S.C. 1361 et seq.), the regulations governing the taking and importing of marine mammals (50 CFR part 216), the Endangered Species Act of 1973, as amended...

  15. A comparative study of the contamination of some marine burrower invertebrates by cobalt 60 and cesium 137

    International Nuclear Information System (INIS)

    Amiard-Triquet, C.


    Experments were carried out with species whose mode of life is characterized by close contact with the sediments; they represent different zoological groups: an Annelid (Arenicola marina L.), an Echinoderm (Echinocardium cordatum Pennant) and two Lamellibranchs (Scrobicularia plana da Costa, Macoma balthica L.). The data obtained indicate that main vector of contamination of benthic marine invertebrates is water. The main part of these organisms in the sedimentary zone would be the redistribution, within the sediment, of radioelements adsorbed on the surface [fr

  16. Sedimentary mode and reservoir genesis of dual grain banks at the Lower Cambrian Longwangmiao Fm carbonate ramp in the Sichuan Basin

    Directory of Open Access Journals (Sweden)

    Jinhu Du


    Full Text Available The gas reservoir of the Lower Cambrian Longwangmiao Fm in the Sichuan Basin is a supergiant integral marine carbonate gas reservoir whose single scale is currently the largest in China. In order to figure out its sedimentary model and reservoir genesis, its geological structures and sedimentary settings and facies were analyzed comprehensively and the lithofacies paleographic map was plotted. It is revealed that the following sedimentary facies are successively developed in the Longwangmiao Fm from West Sichuan to Southeast Chongqing: diamictic tidal flat at the back ramp, grain bank (the upper bank at the inner/shallow ramp – interbank sea (depression, deeper open bay at the platform depression of inner ramp → evaporative lagoon → evaporative tidal flat, tempestite at the middle ramp – barrier beach – mud mound beach (the lower bank, and outer ramp – basin. Accordingly, the specific sedimentary model of dual grain banks in the Longwangmiao Fm carbonate ramp was established as follows. Firstly, in this model, dual grain banks are symmetrically developed with Wanzhou–Yibin platform depression as the axis, on whose dual sides the paleohighs have shallow water bodies with strong energy. Compared with the classical model, the new one has a new upper bank which is developed around the paleohighs covering an area of about 8 × 104 km2. Secondly, the upper bank is large for its paleogeomorphology being located at the highest position with the strongest water energy during deposition. Therefore, it is prone to dolomitization and meteoric dissolution respectively during contemporaneous–penecontemporaneous hot-dry and hot-humid periods, and especially the Caledonian–Early Hercynian denudation wedge out tends to undergo post-supergene multiphase karstification. Therefore, quality reservoirs are more developed on scale. Thirdly, the intergranular pores and vermes moldic pores were dissolved and enlarged due to the multiphase

  17. Modelling the impact of discharges of technologically enhanced natural series radionuclides in the marine environment

    International Nuclear Information System (INIS)

    Scott, E.M.; Baxter, M.S.


    Natural radionuclides are used within the marine environment to study particle associated processes such as scavenging and sedimentary re-working (Th-234) and to date events and measure rates (Pb-210). In addition, Po-210 has been shown to make a significant contribution to the collective dose of the world population through consumption of marine products (fish). The interpretation of observed activity ratios in the environment is presented, based on earlier description. The natural marine system may however undergo a number of disturbances on a local scale due to discharges of technologically enhanced radionuclides from industrial processes such as phosphate ore processing and scaling in oil and gas production. Some work done to extend the original Bateman equations is shown to describe the behaviour of a decay series under a number of different types of perturbations, and the approach is demonstrated through simulation of a simple system. (author)

  18. Sedimentary features of the Blackhawk formation (Cretaceous) at Sunnyside, Carbon County, Utah (United States)

    Maberry, John O.


    The Blackhawk Formation at Sunnyside, Utah, was deposited along the western margin of the Western Interior Cretaceous sea during southeastward withdrawal of the sea. Sand was the dominant type of land-derived sediment deposited in the Sunnyside district during the regressive phases. Sand bodies prograded seaward in response to changing sediment supply from a source west of Sunnyside. Where conditions were favorable for the accumulation of vegetable material, peat deposits formed and were later changed to bituminous Coal by diagenesis. Studies of the coal bed show that the coals were formed from accumulation of small, low-growing plants and plant debris that was transported into the area of accumulation. Remains of large plants in the coals are rare. Trace fossils, which are tracks, trails and burrows formed by organisms and preserved in the rock, are extremely abundant in the Blackhawk rocks. These biogenic sedimentary structures are common in Cretaceous deposits throughout the western United States. Trace fossil distribution in the rocks is controlled by the depositional environment preferred by their creators. A study of the trace fossils of a. locality allows a more precise determination of the conditions during deposition of the sediments. Water depth, bottom conditions, salinity, current velocity and amount of suspended nutrients in the water are some of the environmental factors that may be reconstructed by studying trace fossils. The Blackhawk Formation at Sunnyside comprises the members, the Kenilworth Member and the Sunnyside Member. Field studies show that the formation may be further subdivided in the Sunnyside district., according to the precepts of units of mappable thickness and similar lithologic characteristics. The Blackhawk pinches out eastward and north. ward into the Mancos Shale, and names for submembers become meaningless. Names are of value in the region of interest, however, because of the prominence of the named units. Coal mining is the

  19. A Framework to Estimate CO2 Leakage associated with Geological Storage in Mature Sedimentary Basins (United States)

    Celia, M. A.; Bachu, S.; Gasda, S.


    Geological storage of carbon dioxide requires careful risk analysis to avoid unintended consequences associated with the subsurface injection. Most negative consequences of subsurface injection are associated with leakage of the injected CO2 out of the geological formation into which it is injected. Such leakage may occur through natural geological features, including fractures and faults, or it may occur through human-created pathways such as existing wells. Possible leakage of CO2 through existing wells appears to be especially important in mature sedimentary basins that have been explored intensively and exploited for hydrocarbon production. In the Alberta Basin of western Canada, more than 300,000 oil and gas wells have been drilled, while in the state of Texas in the United States, more than 1,500,000 wells have been drilled. Many of these wells have been abandoned, and the information available to describe their current state is highly variable and sometimes nonexistent. Because these wells represent possible direct conduits from the injection zone to the land surface, a comprehensive assessment of leakage potential associated with these wells needs to be pursued. Analysis of leakage potential associated with existing wells must combine a data mining component with a multi-level modeling effort to assess leakage potential in a probabilistic framework. Information available for existing wells must be categorized and analyzed, and general leakage characteristics associated with wells of varying properties must be quantified. One example of a realistic target formation is the Viking Formation in Alberta, which is overlain by a thick shale layer and contains hydrocarbon in some locations. The existence of hydrocarbon in the formation indicates that the overlying shale layer is an effective barrier to flow, and therefore this is a good candidate formation for CO2 storage. However, the formation and its cap rock are punctured by approximately 180,000 wells, with

  20. IAEA Monitors Marine Radioactivity

    International Nuclear Information System (INIS)

    Dixit, Aabha; Kaiser, Peter


    The IAEA assists Member States in using scientific tools to precisely identify and track nuclear and nonnuclear contaminants, as well as to investigate their biological effects on the marine ecosystem

  1. Permitted Marine Hydrokinetic Projects (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data represents pending or issued preliminary permits or issued licenses for marine hydrokinetic projects that produce energy from waves or directly from the...

  2. The marine cyanobacterium

    NARCIS (Netherlands)

    Pade, N.; Compaoré, J.; Klähn, S.; Stal, L.J.; Hagemann, M.


    Compatible solutes are small organic molecules that are involved in the acclimation to various stresses such as temperature and salinity. Marine or moderate halotolerant cyanobacteria accumulate glucosylglycerol, while cyanobacteria with low salt tolerance (freshwater strains) usually accumulate

  3. Foodborne Marine Biotoxins

    National Research Council Canada - National Science Library

    Poli, Mark


    ...). In addition to human intoxications, they cause massive fish kills, negatively impact coastal tourism and fishery industries, and have been implicated in mass mortalities of birds and marine mammals...

  4. LEGACY - EOP Marine Debris (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These data contains towed diver surveys of and weights of marine debris removed from the near shore environments of the NWHI.

  5. Biotechnology of marine fungi

    Digital Repository Service at National Institute of Oceanography (India)

    Damare, S.R.; Singh, P.; Raghukumar, S.

    Filamentous fungi are the most widely used eukaryotes in industrial and pharmaceutical applications. Their biotechnological uses include the production of enzymes, vitamins, polysaccharides, pigments, lipids and others. Marine fungi are a still...

  6. WMO Marine Final Reports (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Final reports of the World Meteorological Organization (WMO) Commission for Marine Meteorology, Commission for Synoptic Meteorology, and Commission for Basic...

  7. PIR Marine Turtle Nesting (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Effective management of marine turtle data is essential to maximize their research value and enable timely population assessments and recovery monitoring. To provide...

  8. PIR Marine Turtle Strandings (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Effective management of marine turtle data is essential to maximize their research value and enable timely population assessments and recovery monitoring. To provide...

  9. Marine Mammals :: NOAA Fisheries (United States)

    Resources Habitat Conservation Science and Technology International Affairs Law Enforcement Aquaculture Application Types Apply Online (APPS) Endangered Species Permits Marine Mammal Permits Public Display of : NMFS Pacific Islands Fisheries Science Center North Atlantic right whales North Atlantic Right whales

  10. Marine Pollution Prevention Act (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Marine Pollution Prevention Act of 2008 implements the International Convention for the Prevention of Pollution from Ships, including related Protocols (MARPOL)...

  11. Mariner Outreach Data - (United States)

    Department of Transportation — This dataset provides MARAD with the ability to determine available personnel and resources in a time of emergency. It also provides a portal for mariners to update...

  12. Marine Sanitation Devices (MSDs) (United States)

    Marine sanitation devices treat or retain sewage from vessels, and have performance standards set by the EPA. This page provides information on MSDs, including who must use an MSD, states' roles, types of MSDs and standards.

  13. Marine Trackline Geophysical Database (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains bathymetry, magnetic, gravity and seismic shot point navigation data collected during marine cruises from 1939 to the present. Coverage is...

  14. Marine medicinal glycomics

    Directory of Open Access Journals (Sweden)

    Vitor Hugo Pomin


    Full Text Available Glycomics is an international initiative aimed to understand the structure and function of the glycans from a given type of cell, tissue, organism, kingdom or even environment, as found under certain conditions. Glycomics is one of the latest areas of intense biological research. Glycans of marine sources are unique in terms of structure and function. They differ considerably from those of terrestrial origin. This review discusses the most known marine glycans of potential therapeutic properties. They are chitin, chitosan, and sulfated polysaccharides named glycosaminoglycans, sulfated fucans and sulfated galactans. Their medical actions are very broad. When certain structural requirements are found, these glycans can exhibit beneficial effects in inflammation, coagulation, thrombosis, cancer growth/metastasis and vascular biology. Both structure and therapeutic mechanisms of action of these marine glycans are discussed here in straight context with the current glycomic age through a project suggestively named Marine Medicinal Glycomics.

  15. Marine prostanoids - a review

    Digital Repository Service at National Institute of Oceanography (India)

    Wahidullah, S.; De

    The occurrence and structure of prostaglandins including clavulones, punaglandins and claviridenones in marine organisms is reviewEd. by comparison of the spectral data reported the identity of 20-acetoxy claviridenones b and c with 20 acetoxy...

  16. Late Quaternary sedimentary features of Bear Lake, Utah and Idaho (United States)

    Smoot, J.P.


    Bear Lake sediments were predominantly aragonite for most of the Holocene, reflecting a hydrologically closed lake fed by groundwater and small streams. During the late Pleistocene, the Bear River flowed into Bear Lake and the lake waters spilled back into the Bear River drainage. At that time, sediment deposition was dominated by siliciclastic sediment and calcite. Lake-level fluctuation during the Holocene and late Pleistocene produced three types of aragonite deposits in the central lake area that are differentiated primarily by grain size, sorting, and diatom assemblage. Lake-margin deposits during this period consisted of sandy deposits including well-developed shoreface deposits on margins adjacent to relatively steep gradient lake floors and thin, graded shell gravel on margins adjacent to very low gradient lake-floor areas. Throughout the period of aragonite deposition, episodic drops in lake level resulted in erosion of shallow-water deposits, which were redeposited into the deeper lake. These sediment-focusing episodes are recognized by mixing of different mineralogies and crystal habits and mixing of a range of diatom fauna into poorly sorted mud layers. Lake-level drops are also indicated by erosional gaps in the shallow-water records and the occurrence of shoreline deposits in areas now covered by as much as 30 m of water. Calcite precipitation occurred for a short interval of time during the Holocene in response to an influx of Bear River water ca. 8 ka. The Pleistocene sedimentary record of Bear Lake until ca. 18 ka is dominated by siliciclastic glacial fl our derived from glaciers in the Uinta Mountains. The Bear Lake deep-water siliciclastic deposits are thoroughly bioturbated, whereas shallow-water deposits transitional to deltas in the northern part of the basin are upward-coarsening sequences of laminated mud, silt, and sand. A major drop in lake level occurred ca. 18 ka, resulting in subaerial exposure of the lake floor in areas now covered by

  17. Simulations of hydraulic fracturing and leakage in sedimentary basins

    Energy Technology Data Exchange (ETDEWEB)

    Lothe, Ane Elisabeth


    Hydraulic fracturing and leakage of water through the caprock is described from sedimentary basin over geological time scale. Abnormal pressure accumulations reduce the effective stresses in the underground and trigger the initiation of hydraulic fractures. The major faults in the basin define these pressure compartments. In this Thesis, basin simulations of hydraulic fracturing and leakage have been carried out. A simulator (Pressim) is used to calculate pressure generation and dissipitation between the compartments. The flux between the compartments and not the flow within the compartments is modelled. The Griffith-Coulomb failure criterion determines initial failure at the top structures of overpressured compartments, whereas the frictional sliding criterion is used for reactivation along the same fractures. The minimum horizontal stress is determined from different formulas, and an empirical one seems to give good results compared to measured pressures and minimum horizontal stresses. Simulations have been carried out on two datasets; one covering the Halten Terrace area and one the Tune Field area in the northern North Sea. The timing of hydraulic fracturing and amount of leakage has been quantified in the studies from the Halten Terrace area. This is mainly controlled by the lateral fluid flow and the permeability of the major faults in the basin. Low fault permeability gives early failure, while high fault permeabilities results in no or late hydraulic fracturing and leakage from overpressured parts of the basin. In addition to varying the transmissibility of all faults in a basin, the transmissibility across individual faults can be varied. Increasing the transmissibility across faults is of major importance in overpressured to intermediately pressured areas. However, to obtain change in the flow, a certain pressure difference has to be the situation between the different compartments. The coefficient of internal friction and the coefficient of frictional

  18. Marine cloud brightening


    Latham, John; Bower, Keith; Choularton, Tom; Coe, Hugh; Connolly, Paul; Cooper, Gary; Craft, Tim; Foster, Jack; Gadian, Alan; Galbraith, Lee; Iacovides, Hector; Johnston, David; Launder, Brian; Leslie, Brian; Meyer, John


    The idea behind the marine cloud-brightening (MCB) geoengineering technique is that seeding marine stratocumulus clouds with copious quantities of roughly monodisperse sub-micrometre sea water particles might significantly enhance the cloud droplet number concentration, and thereby the cloud albedo and possibly longevity. This would produce a cooling, which general circulation model (GCM) computations suggest could—subject to satisfactory resolution of technical and scientific problems identi...

  19. Marine Pollution and Ecotoxicology

    Digital Repository Service at National Institute of Oceanography (India)

    Sarkar, A.

    . Heavy metals Editorial Guest The special issue of Environment International has come up with selected papers presented in the International workshop on Marine Pollution and Ecotoxicology held at the National Institute of Oceanography, Dona Paula, Goa... presented in this special issue are classified into five sections namely, Coastal water quality, Heavy metals, Trace metals, Persistent organic pollutants and Ecotoxicology. 1. Coastal water quality assessment The pollution of the marine environment has...

  20. Marine Anthropogenic Litter


    Bergmann, Melanie; Gutow, Lars; Klages, Michael


    This book describes how manmade litter, primarily plastic, has spread into the remotest parts of the oceans and covers all aspects of this pollution problem from the impacts on wildlife and human health to socio-economic and political issues. Marine litter is a prime threat to marine wildlife, habitats and food webs worldwide. The book illustrates how advanced technologies from deep-sea research, microbiology and mathematic modelling as well as classic beach litter counts by volunteers co...

  1. Marine Ecosystem Services

    DEFF Research Database (Denmark)

    Hasler, Berit; Ahtiainen, Heini; Hasselström, Linus

    MARECOS (Marine Ecosystem Services) er et tværfagligt studie, der har haft til formål at tilvejebringe information vedrørende kortlægning og værdisætning af økosystemtjenester, som kan anvendes i forbindelse med udformning af regulering på det marine område såvel nationalt, som regionalt og inter...

  2. Marine Corps Pay Incentives (United States)

    Marines from 2000 to 2017. The thesis includes a literature review on economic theory related to pay incentives in the Department of Defense, a...The purpose of this thesis to provide the Marine Corps with a comprehensive report on pay incentive programs and special pay that were available to...summarization of pay incentive categories, a data analysis on take-up rates and average annual amounts at the end of each fiscal year, and a program review

  3. Thickly Syndetical Sensitivity of Topological Dynamical System

    Directory of Open Access Journals (Sweden)

    Heng Liu


    Full Text Available Consider the surjective continuous map f:X→X, where X is a compact metric space. In this paper we give several stronger versions of sensitivity, such as thick sensitivity, syndetic sensitivity, thickly syndetic sensitivity, and strong sensitivity. We establish the following. (1 If (X,f is minimal and sensitive, then (X,f is syndetically sensitive. (2 Weak mixing implies thick sensitivity. (3 If (X,f is minimal and weakly mixing, then it is thickly syndetically sensitive. (4 If (X,f is a nonminimal M-system, then it is thickly syndetically sensitive. Devaney chaos implies thickly periodic sensitivity. (5 We give a syndetically sensitive system which is not thickly sensitive. (6 We give thickly syndetically sensitive examples but not cofinitely sensitive ones.

  4. three dimensional photoelastic investigations on thick rectangular

    African Journals Online (AJOL)



    Sep 1, 1983 ... Thick rectangular plates are investigated by means of three-dimensional photoelasticity ... a thin plate theory and a higher order thick plate theory. 1. ..... number of fringes lest the accuracy of the results will be considerably.

  5. Non-contact radiation thickness gauge

    International Nuclear Information System (INIS)

    Tsujii, T.; Okino, T.


    A noncontact thickness gauge system for measuring the thickness of a material comprising a source of radiation, a detector for detecting the amount of radiation transmitted through the material which is a function of the absorptance and thickness of the material, a memory for storing the output signals of the detector and curve-defining parameters for a plurality of quadratic calibration curves which correspond to respective thickness ranges, and a processor for processing the signals and curve defining parameters to determine the thickness of the material. Measurements are made after precalibration to obtain calibration curves and these are stored in the memory, providing signals representative of a nominal thickness and an alloy compensation coefficient for the material. The calibration curve corresponding to a particular thickness range is selected and the curve compensated for drift; the material is inserted into the radiation path and the detector output signal processed with the compensated calibration curve to determine the thickness of the material. (author)

  6. Field-scale forward modelling of a shallow marine carbonate ramp: the Upper Jurassic Arab Formation (onshore Abu Dhabi - UAE) (United States)

    Marchionda, Elisabetta; Deschamps, Rémy; Nader, Fadi H.; Ceriani, Andrea; Di Giulio, Andrea; Lawrence, David; Morad, Daniel J.


    The stratigraphic record of a carbonate system is the result of the interplay of several local and global factors that control the physical and the biological responses within a basin. Conceptual models cannot be detailed enough to take into account all the processes that control the deposition of sediments. The evaluation of the key controlling parameters on the sedimentation can be investigated with the use of stratigraphic forward models, that permit dynamic and quantitative simulations of the sedimentary basin infill. This work focuses on an onshore Abu Dhabi field (UAE) and it aims to provide a complete picture of the stratigraphic evolution of Upper Jurassic Arab Formation (Fm.). In this study, we started with the definition of the field-scale conceptual depositional model of the Formation, resulting from facies and well log analysis based on five wells. The Arab Fm. could be defined as a shallow marine carbonate ramp, that ranges from outer ramp deposits to supratidal/evaporitic facies association (from bottom to top). With the reconstruction of the sequence stratigraphic pattern and several paleofacies maps, it was possible to suggest multiple directions of progradations at local scale. Then, a 3D forward modelling tool has been used to i) identify and quantify the controlling parameters on geometries and facies distribution of the Arab Fm.; ii) predict the stratigraphic architecture of the Arab Fm.; and iii) integrate and validate the conceptual model. Numerous constraints were set during the different simulations and sensitivity analyses were performed testing the carbonate production, eustatic oscillations and transport parameters. To verify the geological consistency the 3D forward modelling has been calibrated with the available control points (five wells) in terms of thickness and facies distribution.

  7. Recent benthic foraminifera and sedimentary facies from mangrove swamps and channels of Abu Dhabi (United Arab Emirates) (United States)

    Fiorini, Flavia; Odeh, Weaam A. S. Al; Lokier, Stephen W.; Paul, Andreas


    Zonation of Recent mangrove environments can be defined using benthic foraminifera, however, little is known about foraminifera from mangrove environments of the Arabian Gulf. The objective of this study is to produce a detailed micropaleontological and sedimentological analysis to identify foraminiferal associations in several coastline environments (mangrove swamps and channels) located on the eastern side of Abu Dhabi Island (UAE). Detailed sediment sampling collection in mangal environments of Eastern Abu Dhabi was carried out to assess the distribution of living and dead benthic foraminifera in different sedimentary facies in the mangal and in the surrounding area comprising natural environments of the upper and lower intertidal area (mud flats and channels) and areas modified by anthropogenic activities (dredged channels). The fine-grain sediments collected near mangrove (Avicenna marina) roots presented a high abundance of living and dead foraminifera tests. The assemblages in these samples show very low diversity and are almost entirely constituted of small-sized opportunistic species belonging to the genera Ammonia and Elphidium. In particular: • Samples collected on the mud flat and in ponds at the margin of the channel show a foraminiferal assemblage characterised by abundant foraminifera belonging to the genera Ammonia, Elphidium, Triloculina, Quinqueloculina, Peneroplis and Spirolina. • Samples collected in the lower (wet) intertidal area close to Avicenna marina roots, presented a low-diversity assemblage mostly comprising opportunistic foraminifera of the genera Ammonia and Elphidium along with rare miliolidae. • Samples from the upper intertidal area (dry) close to Avicenna marina roots, produced an assemblage exclusively composed of small-sized opportunistic Ammonia and Elphidium, together with abundant specimens belonging to the genera Trochammina. Throchammina specimens have not been previously recorded from Recent sedimentary samples of

  8. Improved Marine Waters Monitoring (United States)

    Palazov, Atanas; Yakushev, Evgeniy; Milkova, Tanya; Slabakova, Violeta; Hristova, Ognyana


    IMAMO - Improved Marine Waters Monitoring is a project under the Programme BG02: Improved monitoring of marine waters, managed by Bulgarian Ministry of environment and waters and co-financed by the Financial Mechanism of the European Economic Area (EEA FM) 2009 - 2014. Project Beneficiary is the Institute of oceanology - Bulgarian Academy of Sciences with two partners: Norwegian Institute for Water Research and Bulgarian Black Sea Basin Directorate. The Project aims to improve the monitoring capacity and expertise of the organizations responsible for marine waters monitoring in Bulgaria to meet the requirements of EU and national legislation. The main outcomes are to fill the gaps in information from the Initial assessment of the marine environment and to collect data to assess the current ecological status of marine waters including information as a base for revision of ecological targets established by the monitoring programme prepared in 2014 under Art. 11 of MSFD. Project activities are targeted to ensure data for Descriptors 5, 8 and 9. IMAMO aims to increase the institutional capacity of the Bulgarian partners related to the monitoring and assessment of the Black Sea environment. The main outputs are: establishment of real time monitoring and set up of accredited laboratory facilities for marine waters and sediments chemical analysis to ensure the ability of Bulgarian partners to monitor progress of subsequent measures undertaken.

  9. Autonomous Sea-Ice Thickness Survey (United States)


    the conductivity of an infinitely thick slab of sea ice. Ice thickness, Hice, is then obtained by subtracting the height of the ...Thickness Survey of Sea Ice Runway” ERDC/CRREL SR-16-4 ii Abstract We conducted an autonomous survey of sea -ice thickness using the Polar rover Yeti...efficiency relative to manual surveys routinely con- ducted to assess the safety of roads and runways constructed on the sea ice. Yeti executed the

  10. 3D mechanical stratigraphy of a deformed multi-layer: Linking sedimentary architecture and strain partitioning (United States)

    Cawood, Adam J.; Bond, Clare E.


    Stratigraphic influence on structural style and strain distribution in deformed sedimentary sequences is well established, in models of 2D mechanical stratigraphy. In this study we attempt to refine existing models of stratigraphic-structure interaction by examining outcrop scale 3D variations in sedimentary architecture and the effects on subsequent deformation. At Monkstone Point, Pembrokeshire, SW Wales, digital mapping and virtual scanline data from a high resolution virtual outcrop have been combined with field observations, sedimentary logs and thin section analysis. Results show that significant variation in strain partitioning is controlled by changes, at a scale of tens of metres, in sedimentary architecture within Upper Carboniferous fluvio-deltaic deposits. Coupled vs uncoupled deformation of the sequence is defined by the composition and lateral continuity of mechanical units and unit interfaces. Where the sedimentary sequence is characterized by gradational changes in composition and grain size, we find that deformation structures are best characterized by patterns of distributed strain. In contrast, distinct compositional changes vertically and in laterally equivalent deposits results in highly partitioned deformation and strain. The mechanical stratigraphy of the study area is inherently 3D in nature, due to lateral and vertical compositional variability. Consideration should be given to 3D variations in mechanical stratigraphy, such as those outlined here, when predicting subsurface deformation in multi-layers.

  11. Sources and distribution of sedimentary organic matter along the Andong salt marsh, Hangzhou Bay (United States)

    Yuan, Hong-Wei; Chen, Jian-Fang; Ye, Ying; Lou, Zhang-Hua; Jin, Ai-Min; Chen, Xue-Gang; Jiang, Zong-Pei; Lin, Yu-Shih; Chen, Chen-Tung Arthur; Loh, Pei Sun


    Lignin oxidation products, δ13C values, C/N ratios and particle size were used to investigate the sources, distribution and chemical stability of sedimentary organic matter (OM) along the Andong salt marsh located in the southwestern end of Hangzhou Bay, China. Terrestrial OM was highest at the upper marshes and decreased closer to the sea, and the distribution of sedimentary total organic carbon (TOC) was influenced mostly by particle size. Terrestrial OM with a C3 signature was the predominant source of sedimentary OM in the Spartina alterniflora-dominated salt marsh system. This means that aside from contributions from the local marsh plants, the Andong salt marsh received input mostly from the Qiantang River and the Changjiang Estuary. Transect C, which was situated nearer to the Qiantang River mouth, was most likely influenced by input from the Qiantang River. Likewise, a nearby creek could be transporting materials from Hangzhou Bay into Transect A (farther east than Transect C), as Transect A showed a signal resembling that of the Changjiang Estuary. The predominance of terrestrial OM in the Andong salt marsh despite overall reductions in sedimentary and terrestrial OM input from the rivers is most likely due to increased contributions of sedimentary and terrestrial OM from erosion. This study shows that lower salt marsh accretion due to the presence of reservoirs upstream may be counterbalanced by increased erosion from the surrounding coastal areas.

  12. Study on flow and mass transport through fractured sedimentary rocks (2)

    International Nuclear Information System (INIS)

    Shimo, Michito; Kumamoto, Sou; Karasaki, Kenzi; Sato, Hisashi; Sawada, Atsushi


    It is important for safety assessment of HLW geological disposal to understand hydro-geological conditions at the investigation area, and to evaluate groundwater flow and mass transport model and parameters, at each investigation phase. Traditionally, for Neogene sedimentary rock, the grain spacing of sediments has been considered as the dominant migration path. However, fractures of sedimentary rock could act as dominant paths, although they were soft sedimentary rocks. In this study, as part of developing groundwater flow and mass transport evaluation methodologies of such a fractured sedimentary rock' distributed area, we conducted two different scale of studies; 1) core rock sample scale and 2) several kilometer scale. For the core rock sample scale, some of laboratory hydraulic and tracer experiments have conducted using the rock cores with tailored parallel fracture, obtained at pilot borehole drilled in the vicinity of ventilation shaft. From the test results, hydraulic conductivity, diffusion coefficient, transport aperture, dispersion length and etc. was evaluated. Based on these test results, the influence of these parameters onto mass transport behavior of fractures sedimentary rocks was examined. For larger scale, such as several kilometer scale, the regional scale groundwater flow was examined using temperature data observed along the boreholes at Horonobe site. The results show that the low permeable zone between the boreholes might be estimated. (author)

  13. Shallow-seated explosions in the construction of the Motukorea tuff ring (Auckland, New Zealand): Evidence from lithic and sedimentary characteristics (United States)

    Agustín-Flores, Javier; Németh, Károly; Cronin, Shane J.; Lindsay, Jan M.; Kereszturi, Gábor


    At least 52 eruption centres are scattered within the 360 km2 Auckland Volcanic Field (AVF). Motukorea, now an island in the Waitemata Harbour, is one of 39 AVF volcanoes that experienced a phreatomagmatic explosive phase, before a magmatic phase. The volcano erupted through a 200-300 m-thick, consolidated, mudstone/sandstone sequence of the Miocene Waitemata Group, which overlies the Waipapa Terrane greywacke basement. Detailed field descriptions of the sedimentary characteristics of the early phreatomagmatic deposits were carried out, along with examination of lithics. The ejecta ring deposit comprises 55 to 60 vol.% lithics, of which Waitemata Group fragments constitute approximately 90 vol.%, whereas < 10 vol.% are Waipapa fragments, suggesting a dominance of shallow fragmentation. The sedimentary characteristics of the stratigraphic sequence at Motukorea suggest a dominance of wet surges at the beginning of the eruption with progression into drier sequences upwards. This is reflected in increasing inter-bedded juvenile-pyroclast-dominated fall deposits up-sequence. These characteristics are attributed to the changing hydrogeological conditions within the diatreme and the host rocks. These findings shed light on the eruption dynamics of phreatomagmatic eruptions through consolidated rocks in the AVF and enable the depiction of a scenario of future eruptions within the field in similar substrates.

  14. Jurassic sedimentary evolution of southern Junggar Basin: Implication for palaeoclimate changes in northern Xinjiang Uygur Autonomous Region, China

    Directory of Open Access Journals (Sweden)

    Shun-Li Li


    Full Text Available Junggar Basin, located in northern Xinjiang, presents continuous and multikilometer-thick strata of the Jurassic deposits. The Jurassic was entirely terrestrial fluvial and lacustrine deltaic sedimentation. Eight outcrop sections across the Jurassic strata were measured at a resolution of meters in southern Junggar Basin. Controlling factors of sedimentary evolution and palaeoclimate changes in Junggar Basin during the Jurassic were discussed based on lithology, fossils and tectonic setting. In the Early to Middle Jurassic, the warm and wide Tethys Sea generated a strong monsoonal circulation over the central Asian continent, and provided adequate moisture for Junggar Basin. Coal-bearing strata of the Badaowan, Sangonghe, and Xishanyao Formations were developed under warm and humid palaeoclimate in Junggar Basin. In the late Middle Jurassic, Junggar Basin was in a semi-humid and semi-arid environment due to global warming event. Stratigraphy in the upper part of the Middle Jurassic with less plant fossils became multicolor or reddish from dark color sediments. During the Late Jurassic, collision of Lhasa and Qiangtang Block obstructed monsoon from the Tethys Sea. A major change in climate from semi-humid and semi-arid to arid conditions took place, and reddish strata of the Upper Jurassic were developed across Junggar Basin.

  15. doped ZnO thick film resistors

    Indian Academy of Sciences (India)

    The characterization and ethanol gas sensing properties of pure and doped ZnO thick films were investigated. Thick films of pure zinc oxide were prepared by the screen printing technique. Pure zinc oxide was almost insensitive to ethanol. Thick films of Al2O3 (1 wt%) doped ZnO were observed to be highly sensitive to ...

  16. Macular thickness and volume in the elderly

    DEFF Research Database (Denmark)

    Subhi, Yousif; Forshaw, Thomas; Sørensen, Torben Lykke


    manifests in the macula of the elderly focusing on clinical relevant measures that are thicknesses and volumes of different macular areas. Ageing seems to increase center point foveal thickness. Ageing does not seem to change the center subfield thickness significantly. Ageing decreases the inner and outer...

  17. High resolution stratigraphy and paleoenvironmental changes in the southern North Sea during the Neogene : an integrated study of Late Cenozoic marine deposits from the northern part of the Dutch offshore area

    NARCIS (Netherlands)

    Kuhlmann, Gesa


    This thesis is the result of a multidisciplinary study on the prograding marine Neogene sedimentary succession of the southern North Sea Basin. To date, sediment material available from the Neogene North Sea is very scarce. Its location between 400 and 1500 m below the seabed in the depocentre of

  18. High resolution stratigraphy and paleoenvironmental changes in the southern North Sea during the Neogene : An integrated study of Late Cenozoic marine deposits from the northern part of the Dutch offshore area

    NARCIS (Netherlands)

    Kuhlmann, G.


    This thesis is the result of a multidisciplinary study on the prograding marine Neogene sedimentary succession of the southern North Sea Basin. To date, sediment material available from the Neogene North Sea is very scarce. Its location between 400 and 1500 m below the seabed in the depocentre of

  19. Foreland sedimentary record of Andean mountain building during advancing and retreating subduction (United States)

    Horton, Brian K.


    As in many ocean-continent (Andean-type) convergent margins, the South American foreland has long-lived (>50-100 Myr) sedimentary records spanning not only protracted crustal shortening, but also periods of neutral to extensional stress conditions. A regional synthesis of Andean basin histories is complemented by new results from the Mesozoic Neuquén basin system and succeeding Cenozoic foreland system of west-central Argentina (34-36°S) showing (1) a Late Cretaceous shift from backarc extension to retroarc contraction and (2) an anomalous mid-Cenozoic (~40-20 Ma) phase of sustained nondeposition. New detrital zircon U-Pb geochronological results from Jurassic through Neogene clastic deposits constrain exhumation of the evolving Andean magmatic arc, retroarc thrust belt, foreland basement uplifts, and distal eastern craton. Abrupt changes in sediment provenance and distal-to-proximal depositional conditions can be reconciled with a complex Mesozoic-Cenozoic history of extension, post-extensional thermal subsidence, punctuated tectonic inversion involving thick- and thin-skinned shortening, alternating phases of erosion and rapid accumulation, and overlapping igneous activity. U-Pb age distributions define the depositional ages of several Cenozoic stratigraphic units and reveal a major late middle Eocene-earliest Miocene (~40-20 Ma) hiatus in the Malargüe foreland basin. This boundary marks an abrupt shift in depositional conditions and sediment sources, from Paleocene-middle Eocene distal fluviolacustrine deposition of sediments from far western volcanic sources (Andean magmatic arc) and subordinate eastern cratonic basement (Permian-Triassic Choiyoi igneous complex) to Miocene-Quaternary proximal fluvial and alluvial-fan deposition of sediments recycled from emerging western sources (Malargüe fold-thrust belt) of Mesozoic basin fill originally derived from basement and magmatic arc sources. Neogene eastward advance of the fold-thrust belt involved thick

  20. Potential Sedimentary Evidence of Two Closely Spaced Tsunamis on the West Coast of Aceh, Indonesia (United States)

    Monecke, Katrin; Meilianda, Ella; Rushdy, Ibnu; Moena, Abudzar; Yolanda, Irvan P.


    Recent research in the coastal regions of Aceh, Indonesia, an area that was largely affected by the 2004 Sumatra Andaman earthquake and ensuing Indian Ocean tsunami, suggests the possibility that two closely spaced tsunamis occurred at the turn of the 14th to 15th century (Meltzner et al., 2010; Sieh et al., 2015). Here, we present evidence of two buried sand layers in the coastal marshes of West Aceh, possibly representing these penultimate predecessors of the 2004 tsunami. We discovered the sand layers in an until recently inaccessible area of a previously studied beach ridge plain about 15 km North of Meulaboh, West Aceh. Here, the 2004 tsunami left a continuous, typically a few cm thick sand sheet in the coastal hinterland in low-lying swales that accumulate organic-rich deposits and separate the sandy beach ridges. In keeping with the long-term progradation of the coastline, older deposits have to be sought after further inland. Using a hand auger, the buried sand layers were discovered in 3 cores in a flooded and highly vegetated swale in about 1 km distance to the shoreline. The pair of sand layers occurs in 70-100 cm depth and overlies 40-60 cm of dark-brown peat that rests on the basal sand of the beach ridge plain. The lower sand layer is only 1-6 cm thick, whereas the upper layer is consistently thicker, measuring 11-17 cm, with 8-14 cm of peat in between sand sheets. Both layers consist of massive, grey, medium sand and include plant fragments. They show very sharp upper and lower boundaries clearly distinguishing them from the surrounding peat and indicating an abrupt depositional event. A previously developed age model for sediments of this beach ridge plain suggest that this pair of layers could indeed correlate to a nearby buried sand sheet interpreted as tsunamigenic and deposited soon after 1290-1400AD (Monecke et al., 2008). The superb preservation at this new site allows the clear distinction of two depositional events, which, based on a first

  1. Planning of the in-situ creep test in sedimentary soft rocks under high temperature

    International Nuclear Information System (INIS)

    Takakura, Nozomu; Yoshikawa, Kazuo; Okada, Tetsuji; Sawada, Masataka; Tani, Kazuo; Takeda, Kayo


    Research has been conducted on underground facilities for energy storage and waste disposal in sedimentary soft rocks. One of the research topics is that the long-term mechanical behaviors of sedimentary soft rocks can be affected by various environmental factors such as temperatures or hydraulic conditions. Therefore, it is necessary to develop a method for evaluating the long-term stability of caverns in sedimentary soft rocks as influenced by changes in the external environment. This report presents the plan of field creep test for the purpose to establish the evaluation method of long-term stability of caverns in soft rocks. A series of field creep test is performed to study the influence of high temperature in an underground facility at a depth of 50 meters. (author)

  2. Analysis for preliminary evaluation of discrete fracture flow and large-scale permeability in sedimentary rocks

    International Nuclear Information System (INIS)

    Kanehiro, B.Y.; Lai, C.H.; Stow, S.H.


    Conceptual models for sedimentary rock settings that could be used in future evaluation and suitability studies are being examined through the DOE Repository Technology Program. One area of concern for the hydrologic aspects of these models is discrete fracture flow analysis as related to the estimation of the size of the representative elementary volume, evaluation of the appropriateness of continuum assumptions and estimation of the large-scale permeabilities of sedimentary rocks. A basis for preliminary analysis of flow in fracture systems of the types that might be expected to occur in low permeability sedimentary rocks is presented. The approach used involves numerical modeling of discrete fracture flow for the configuration of a large-scale hydrologic field test directed at estimation of the size of the representative elementary volume and large-scale permeability. Analysis of fracture data on the basis of this configuration is expected to provide a preliminary indication of the scale at which continuum assumptions can be made

  3. Finite-frequency P-wave tomography of the Western Canada Sedimentary Basin: Implications for the lithospheric evolution in Western Laurentia (United States)

    Chen, Yunfeng; Gu, Yu Jeffrey; Hung, Shu-Huei


    The lithosphere beneath the Western Canada Sedimentary Basin has potentially undergone Precambrian subduction and collisional orogenesis, resulting in a complex network of crustal domains. To improve the understanding of its evolutionary history, we combine data from the USArray and three regional networks to invert for P-wave velocities of the upper mantle using finite-frequency tomography. Our model reveals distinct, vertically continuous high (> 1%) velocity perturbations at depths above 200 km beneath the Precambrian Buffalo Head Terrane, Hearne craton and Medicine Hat Block, which sharply contrasts with those beneath the Canadian Rockies (Medicine Hat Block (200 km). These findings are consistent with earlier theories of tectonic assembly in this region, which featured distinct Archean and Proterozoic plate convergences between the Hearne craton and its neighboring domains. The highly variable, bimodally distributed craton thicknesses may also reflect different lithospheric destruction processes beneath the western margin of Laurentia.

  4. Sulfurisation of lipids in a marine-influenced lignite

    Energy Technology Data Exchange (ETDEWEB)

    Sandison, C.M.; Alexander, R.; Kagi, R.I.; Boreham, C.J. [Curtin University of Technology, Perth, WA (Australia)


    Compelling evidence is presented for the process of lipid sulfurisation in humic coal-forming environments. The production of reduced inorganic sulfides by sulfate-reducing bacteria during a marine transgression, which occurred during early diagenesis, enabled the selective sequestration of functionalised lipids in the polar and asphaltene fractions from the Eocene, marine-influenced Heartbreak Ridge lignite deposit in southeast Western Australia. Nickel boride desulfurisation experiments conducted on these fractions released small but significant quantities of sulfur-bound hydrocarbons. These comprised mostly higher plant triterpanes, C-29 steranes and extended 17beta(H),21beta(H)-hopanes, linked by one sulfur atom at, or close to, functionalised sites in the original natural product precursors. These sulfurised lipids come from the same carbon sources as the free hydrocarbon lipids, except for the sulfurised extended hopanoids, which may be partially derived from a different bacterial source. These results indicate that the selectivity and nature of steroid and hopanoid vulcanisation in coal-forming mires is similar to that observed in other sedimentary environments. However, the diversity of higher plant triterpanes that can be sulfurised in marine transgressed coals is greater than that reported in immature terrestrial coals. This preservation mechanism explains the formation of the structurally related biomarkers in more mature sulfur-rich humic coals.

  5. Anthropogenic and natural variability in the composition of sedimentary organic matter of the urbanised coastal zone of Montevideo (Río de la Plata). (United States)

    Bueno, C; Brugnoli, E; Bergamino, L; Muniz, P; García-Rodríguez, F; Figueira, R


    This study is aimed to identify the different sources of sedimentary organic matter (SOM) within Montevideo coastal zone (MCZ). To this end δ 13 C, δ 15 N and C/N ratio were analysed in surface sediments and a sediment core. Sediment core analysis showed that until ~1950CE SOM was mainly marine, observing a shift towards lower δ 13 C in recent sediments, evidencing an estuarine composition. This trend was associated to the climatic variability, which exerted a major influence on the SOM composition, leading to an increased input of terrigenous material and associated anthropogenic contaminants. Surface sediments collected during different El Niño South Oscillation (ENSO) phases did not show inter-annual variability in SOM composition, which was mainly marine in both eastern and western region of MCZ and estuarine in Montevideo Bay. This spatial pattern provides new insights on the dynamics and factors affecting organic matter sources available for primary consumers along the study region. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. Intelligent processing for thick composites (United States)

    Shin, Daniel Dong-Ok


    Manufacturing thick composite parts are associated with adverse curing conditions such as large in-plane temperature gradient and exotherms. The condition is further aggravated because the manufacturer's cycle and the existing cure control systems do not adequately counter such affects. In response, the forecast-based thermal control system is developed to have better cure control for thick composites. Accurate cure kinetic model is crucial for correctly identifying the amount of heat generated for composite process simulation. A new technique for identifying cure parameters for Hercules AS4/3502 prepreg is presented by normalizing the DSC data. The cure kinetics is based on an autocatalytic model for the proposed method, which uses dynamic and isothermal DSC data to determine its parameters. Existing models are also used to determine kinetic parameters but rendered inadequate because of the material's temperature dependent final degree of cure. The model predictions determined from the new technique showed good agreement to both isothermal and dynamic DSC data. The final degree of cure was also in good agreement with experimental data. A realistic cure simulation model including bleeder ply analysis and compaction is validated with Hercules AS4/3501-6 based laminates. The nonsymmetrical temperature distribution resulting from the presence of bleeder plies agreed well to the model prediction. Some of the discrepancies in the predicted compaction behavior were attributed to inaccurate viscosity and permeability models. The temperature prediction was quite good for the 3cm laminate. The validated process simulation model along with cure kinetics model for AS4/3502 prepreg were integrated into the thermal control system. The 3cm Hercules AS4/3501-6 and AS4/3502 laminate were fabricated. The resulting cure cycles satisfied all imposed requirements by minimizing exotherms and temperature gradient. Although the duration of the cure cycles increased, such phenomena was

  7. Triple oxygen isotopes in biogenic and sedimentary carbonates (United States)

    Passey, Benjamin H.; Hu, Huanting; Ji, Haoyuan; Montanari, Shaena; Li, Shuning; Henkes, Gregory A.; Levin, Naomi E.


    The 17O anomaly (Δ17O) of natural waters has been shown to be sensitive to evaporation in a way analogous to deuterium excess, with evaporated bodies of water (e.g., leaf waters, lake waters, animal body waters) tending to have lower Δ17O than primary meteoric waters. In animal body water, Δ17O relates to the intake of evaporated waters, evaporative effluxes of water, and the Δ17O value of atmospheric O2, which itself carries signatures of global carbon cycling and photochemical reactions in the stratosphere. Carbonates have the potential to record the triple oxygen isotope compositions of parent waters, allowing reconstruction of past water compositions, but such investigations have awaited development of methods for high-precision measurement of Δ17O of carbonate. We describe optimized methods based on a sequential acid digestion/reduction/fluorination approach that yield Δ17O data with the high precision (∼0.010‰, 1σ) needed to resolve subtle environmental signals. We report the first high-precision Δ17O dataset for terrestrial carbonates, focusing on vertebrate biogenic carbonates and soil carbonates, but also including marine invertebrates and high-temperature carbonates. We determine apparent three-isotope fractionation factors between the O2 analyte derived from carbonate and the parent waters of the carbonate. These in combination with appropriate temperature estimates (from clumped isotope thermometry, or known or estimated body temperatures) are used to calculate the δ18O and Δ17O of parent waters. The clearest pattern to emerge is the strong 17O-depletion in avian, dinosaurian, and mammalian body water (from analyses of eggshell and tooth enamel) relative to meteoric waters, following expected influences of evaporated water (e.g., leaf water) and atmospheric O2 on vertebrate body water. Parent waters of the soil carbonates studied here have Δ17O values that are similar to or slightly lower than global precipitation. Our results suggest

  8. Estimating tectonic history through basin simulation-enhanced seismic inversion: Geoinformatics for sedimentary basins (United States)

    Tandon, K.; Tuncay, K.; Hubbard, K.; Comer, J.; Ortoleva, P.


    A data assimilation approach is demonstrated whereby seismic inversion is both automated and enhanced using a comprehensive numerical sedimentary basin simulator to study the physics and chemistry of sedimentary basin processes in response to geothermal gradient in much greater detail than previously attempted. The approach not only reduces costs by integrating the basin analysis and seismic inversion activities to understand the sedimentary basin evolution with respect to geodynamic parameters-but the technique also has the potential for serving as a geoinfomatics platform for understanding various physical and chemical processes operating at different scales within a sedimentary basin. Tectonic history has a first-order effect on the physical and chemical processes that govern the evolution of sedimentary basins. We demonstrate how such tectonic parameters may be estimated by minimizing the difference between observed seismic reflection data and synthetic ones constructed from the output of a reaction, transport, mechanical (RTM) basin model. We demonstrate the method by reconstructing the geothermal gradient. As thermal history strongly affects the rate of RTM processes operating in a sedimentary basin, variations in geothermal gradient history alter the present-day fluid pressure, effective stress, porosity, fracture statistics and hydrocarbon distribution. All these properties, in turn, affect the mechanical wave velocity and sediment density profiles for a sedimentary basin. The present-day state of the sedimentary basin is imaged by reflection seismology data to a high degree of resolution, but it does not give any indication of the processes that contributed to the evolution of the basin or causes for heterogeneities within the basin that are being imaged. Using texture and fluid properties predicted by our Basin RTM simulator, we generate synthetic seismograms. Linear correlation using power spectra as an error measure and an efficient quadratic

  9. Atmospheric methane from organic carbon mobilization in sedimentary basins — The sleeping giant? (United States)

    Kroeger, K. F.; di Primio, R.; Horsfield, B.


    The mass of organic carbon in sedimentary basins amounts to a staggering 10 16 t, dwarfing the mass contained in coal, oil, gas and all living systems by ten thousand-fold. The evolution of this giant mass during subsidence and uplift, via chemical, physical and biological processes, not only controls fossil energy resource occurrence worldwide, but also has the capacity for driving global climate: only a tiny change in the degree of leakage, particularly if focused through the hydrate cycle, can result in globally significant greenhouse gas emissions. To date, neither climate models nor atmospheric CO 2 budget estimates have quantitatively included methane from thermal or microbial cracking of sedimentary organic matter deep in sedimentary basins. Recent estimates of average low latitude Eocene surface temperatures beyond 30 °C require extreme levels of atmospheric CO 2. Methane degassing from sedimentary basins may be a mechanism to explain increases of atmospheric CO 2 to values as much as 20 times higher than pre-industrial values. Increased natural gas emission could have been set in motion either by global tectonic processes such as pulses of activity in the global alpine fold belt, leading to increased basin subsidence and maturation rates in the prolific Jurassic and Cretaceous organic-rich sediments, or by increased magmatic activity such as observed in the northern Atlantic around the Paleocene-Eocene boundary. Increased natural gas emission would have led to global warming that was accentuated by long lasting positive feedback effects through temperature transfer from the surface into sedimentary basins. Massive gas hydrate dissociation may have been an additional positive feedback factor during hyperthermals superimposed on long term warming, such as the Paleocene-Eocene Thermal Maximum (PETM). As geologic sources may have contributed over one third of global atmospheric methane in pre-industrial time, variability in methane flux from sedimentary

  10. In-situ heater test in sedimentary soft rocks under high temperature (Phase I)

    International Nuclear Information System (INIS)

    Ikenoya, Takafumi; Takakura, Nozomu; Okada, Tetsuji; Sawada, Masataka; Hirano, Kouhei; Tani, Kazuo


    Various researches have been conducted on high level radioactive waste geological disposal in sedimentary soft rocks. It's noted that the long-term mechanical behaviors of sedimentary soft rocks can be affected by various environmental factors such as temperatures or hydraulic conditions. Therefore, in-situ heater test was conducted in an underground cavern at a depth of 50 meters for the purpose of improving thermo-hydro-mechanical coupled analysis code. This report presents the test result demonstrating the changes of temperature and strain distributions with time at the elevated temperature of the heater up to 40 degrees Celsius. (author)

  11. In-situ heating test in sedimentary soft rock. Phase 2

    International Nuclear Information System (INIS)

    Ikenoya, Takafumi; Takakura, Nozomu; Okada, Tetsuji; Sawada, Masataka; Hirano, Kouhei; Tani, Kazuo


    Various researches have been conducted on high level radioactive waste geological disposal in sedimentary soft rocks. It is noted that the long-term mechanical behaviors of sedimentary soft rocks can be affected by various environmental factors such as temperatures or hydraulic conditions. Therefore, in-situ heater test was conducted in an underground cavern at a depth of 50 m for the purpose of improving thermo-hydro-mechanical coupled analysis code. This report presents the test result demonstrating the changes of temperature and strain distributions with time at the elevated temperature of the heater up to 90degC. (author)

  12. Bioprospecting Marine Plankton

    Directory of Open Access Journals (Sweden)

    Chris Bowler


    Full Text Available The ocean dominates the surface of our planet and plays a major role in regulating the biosphere. For example, the microscopic photosynthetic organisms living within provide 50% of the oxygen we breathe, and much of our food and mineral resources are extracted from the ocean. In a time of ecological crisis and major changes in our society, it is essential to turn our attention towards the sea to find additional solutions for a sustainable future. Remarkably, while we are overexploiting many marine resources, particularly the fisheries, the planktonic compartment composed of zooplankton, phytoplankton, bacteria and viruses, represents 95% of marine biomass and yet the extent of its diversity remains largely unknown and underexploited. Consequently, the potential of plankton as a bioresource for humanity is largely untapped. Due to their diverse evolutionary backgrounds, planktonic organisms offer immense opportunities: new resources for medicine, cosmetics and food, renewable energy, and long-term solutions to mitigate climate change. Research programs aiming to exploit culture collections of marine micro-organisms as well as to prospect the huge resources of marine planktonic biodiversity in the oceans are now underway, and several bioactive extracts and purified compounds have already been identified. This review will survey and assess the current state-of-the-art and will propose methodologies to better exploit the potential of marine plankton for drug discovery and for dermocosmetics.

  13. Origin and geochemical behavior of uranium in marine sediments. Utilization of the 234U/238U ratio in marine geochemistry

    International Nuclear Information System (INIS)

    Organo, Catherine


    The first part of this thesis presents the current situation of knowledge of uranium in marine environment. The second part describes the methods of analysis as well as the material support of the study, i.e., the sediments and marine deposits investigated. The third part is dedicated to the study of uranium mobility in marine sediments characterized by detrital terrigenous composition (pelagic clays). This approach allowed quantifying the entering and leaving flux of uranium after the sediment settling and, to discuss, on this basis, the consequences on the uranium oceanic balance. In the third part the origin and behavior of uranium in zones of high surface productivity is studied. The uranium enrichments observed in the hemi-pelagic sediments of the EUMELI (J.G.O.F.S.-France) programme will constitute a material of study adequate for measuring the variations in the 234 U/2 38U ratio in solid phase, in response to the oxido-reducing characteristics of the sediment. Thus establishing the origin of the trapped uranium has been possible. Also, the nature of the sedimentary phases related to uranium in bio-genetic sediments in the Austral Ocean was determined. Thus a relationship between the variations in the 234 U/ 238 and the diagenetic transformations was possible to establish. Finally in the fifth part a study of the behavior of uranium in a polymetallic shell characteristic for deposits of hydrogenized origin

  14. Late Cretaceous Sub-Marine Fan System in Batain Mélange Zone, the Fayah Formation in Northeastern Oman

    Directory of Open Access Journals (Sweden)

    Iftikhar Ahmed Abbasi


    Full Text Available The Batain coast along the northeastern margin of Oman between Ra’s Al-Hadd and Ra’s Jibsch, is comprised of Permian to Late Cretaceous complex stratigraphy in a tectonically deformed area recording Permian rifting to late Cretaceous Tethys closure events. These rocks are thrust over Mesozoic and older autochthonous sedimentary cover in the form of a major nappe structure known as the Batain Nappe. The uppermost part of the Batain nappe is comprised of isolated outcrops of early Maastrichtian siliciclastic Fayah Formation dominated by gravity flow deposits. The Fayah Formation in the Jabal Fayah area is over four hundred meters thick and comprised of five distinct facies associations; namely, i coarsening-up sandstone, ii conglomerate, iii debris- flow, iv turbidite, and v inter-bedded sandstone and shale lithofacies. These lithofacies associations are repeated many times in the section. The sandstone lithofacies association exhibits a coarsening-upward trend making sequences tens of meters thick in various parts of the formation. Waterscape structures are common along with occasional sandstone dykes and convolute bedding, reflecting fluidized conditions of deposition. The conglomerate lithofacies association is comprised of a series of interbedded coarsening-upward pebble to gravel size conglomerates containing chert, limestone, granite and volcanic clasts ranging a few mm to cm in diameter. Occasionally these are interbedded with sandstone lithofacies. The conglomerate lithofacies was deposited by a high-energy channelized flow in a sub-aqueous setting. The debris-flow lithofacies association is a matrix supported chaotic mixture of clay and boulders of granite, limestone and volcanic rocks, some of which are meter-sized in diameter, and possibly derived from the nearby basement rocks such as the Jabal Ja’alan basement rocks. It constitutes the most dominant part of the formation. These sediments were deposited along a slope setting

  15. Vibration-response due to thickness loss on steel plate excited by resonance frequency (United States)

    Kudus, S. A.; Suzuki, Y.; Matsumura, M.; Sugiura, K.


    The degradation of steel structure due to corrosion is a common problem found especially in the marine structure due to exposure to the harsh marine environment. In order to ensure safety and reliability of marine structure, the damage assessment is an indispensable prerequisite for plan of remedial action on damaged structure. The main goal of this paper is to discuss simple vibration measurement on plated structure to give image on overview condition of the monitored structure. The changes of vibration response when damage was introduced in the plate structure were investigated. The damage on plate was simulated in finite element method as loss of thickness section. The size of damage and depth of loss of thickness were varied for different damage cases. The plate was excited with lower order of resonance frequency in accordance estimate the average remaining thickness based on displacement response obtain in the dynamic analysis. Significant reduction of natural frequency and increasing amplitude of vibration can be observed in the presence of severe damage. The vibration analysis summarized in this study can serve as benchmark and reference for researcher and design engineer.

  16. Seismic velocities within the sedimentary succession of the Canada Basin and southern Alpha-Mendeleev Ridge, Arctic Ocean: evidence for accelerated porosity reduction? (United States)

    Shimeld, John; Li, Qingmou; Chian, Deping; Lebedeva-Ivanova, Nina; Jackson, Ruth; Mosher, David; Hutchinson, Deborah R.


    The Canada Basin and the southern Alpha-Mendeleev ridge complex underlie a significant proportion of the Arctic Ocean, but the geology of this undrilled and mostly ice-covered frontier is poorly known. New information is encoded in seismic wide-angle reflections and refractions recorded with expendable sonobuoys between 2007 and 2011. Velocity–depth samples within the sedimentary succession are extracted from published analyses for 142 of these records obtained at irregularly spaced stations across an area of 1.9E + 06 km2. The samples are modelled at regional, subregional and station-specific scales using an exponential function of inverse velocity versus depth with regionally representative parameters determined through numerical regression. With this approach, smooth, non-oscillatory velocity–depth profiles can be generated for any desired location in the study area, even where the measurement density is low. Practical application is demonstrated with a map of sedimentary thickness, derived from seismic reflection horizons interpreted in the time domain and depth converted using the velocity–depth profiles for each seismic trace. A thickness of 12–13 km is present beneath both the upper Mackenzie fan and the middle slope off of Alaska, but the sedimentary prism thins more gradually outboard of the latter region. Mapping of the observed-to-predicted velocities reveals coherent geospatial trends associated with five subregions: the Mackenzie fan; the continental slopes beyond the Mackenzie fan; the abyssal plain; the southwestern Canada Basin; and, the Alpha-Mendeleev magnetic domain. Comparison of the subregional velocity–depth models with published borehole data, and interpretation of the station-specific best-fitting model parameters, suggests that sandstone is not a predominant lithology in any of the five subregions. However, the bulk sand-to-shale ratio likely increases towards the Mackenzie fan, and the model for this subregion compares

  17. Quantifying time in sedimentary successions by radio-isotopic dating of ash beds (United States)

    Schaltegger, Urs


    Sedimentary rock sequences are an accurate record of geological, chemical and biological processes throughout the history of our planet. If we want to know more about the duration or the rates of some of these processes, we can apply methods of absolute age determination, i.e. of radio-isotopic dating. Data of highest precision and accuracy, and therefore of highest degree of confidence, are obtained by chemical abrasion, isotope-dilution, thermal ionization mass spectrometry (CA-ID-TIMS) 238U-206Pb dating techniques, applied to magmatic zircon from ash beds that are interbedded with the sediments. This techniques allows high-precision estimates of age at the 0.1% uncertainty for single analyses, and down to 0.03% uncertainty for groups of statistically equivalent 206Pb/238U dates. Such high precision is needed, since we would like the precision to be approximately equivalent or better than the (interpolated) duration of ammonoid zones in the Mesozoic (e.g., Ovtcharova et al. 2006), or to match short feedback rates of biological, climatic, or geochemical cycles after giant volcanic eruptions in large igneous provinces (LIP's), e.g., at the Permian/Triassic or the Triassic/Jurassic boundaries. We also wish to establish as precisely as possible temporal coincidence between the sedimentary record and short-lived volcanic events within the LIP's. Precision and accuracy of the U-Pb data has to be traceable and quantifiable in absolute terms, achieved by direct reference to the international kilogram, via an absolute calibration of the standard and isotopic tracer solutions. Only with a perfect control on precision and accuracy of radio-isotopic data, we can confidently determine whether two ages of geological events are really different, and avoid mistaking interlaboratory or interchronometer biases for age difference. The development of unprecedented precision of CA-ID-TIMS 238U-206Pb dates led to the recognition of protracted growth of zircon in a magmatic liquid (see

  18. Persistence of exponential bed thickness distributions in the stratigraphic record: Experiments and theory (United States)

    Straub, K. M.; Ganti, V. K.; Paola, C.; Foufoula-Georgiou, E.


    Stratigraphy preserved in alluvial basins houses the most complete record of information necessary to reconstruct past environmental conditions. Indeed, the character of the sedimentary record is inextricably related to the surface processes that formed it. In this presentation we explore how the signals of surface processes are recorded in stratigraphy through the use of physical and numerical experiments. We focus on linking surface processes to stratigraphy in 1D by quantifying the probability distributions of processes that govern the evolution of depositional systems to the probability distribution of preserved bed thicknesses. In this study we define a bed as a package of sediment bounded above and below by erosional surfaces. In a companion presentation we document heavy-tailed statistics of erosion and deposition from high-resolution temporal elevation data recorded during a controlled physical experiment. However, the heavy tails in the magnitudes of erosional and depositional events are not preserved in the experimental stratigraphy. Similar to many bed thickness distributions reported in field studies we find that an exponential distribution adequately describes the thicknesses of beds preserved in our experiment. We explore the generation of exponential bed thickness distributions from heavy-tailed surface statistics using 1D numerical models. These models indicate that when the full distribution of elevation fluctuations (both erosional and depositional events) is symmetrical, the resulting distribution of bed thicknesses is exponential in form. Finally, we illustrate that a predictable relationship exists between the coefficient of variation of surface elevation fluctuations and the scale-parameter of the resulting exponential distribution of bed thicknesses.

  19. The marine diversity spectrum

    DEFF Research Database (Denmark)

    Reuman, Daniel C.; Gislason, Henrik; Barnes, Carolyn


    of taxonomy (all the species in a region regardless of clade) are much less studied but are equally important and will illuminate a different set of ecological and evolutionary processes. We develop and test a mechanistic model of how diversity varies with body mass in marine ecosystems. The model predicts...... the form of the diversity spectrum', which quantifies the distribution of species' asymptotic body masses, is a species analogue of the classic size spectrum of individuals, and which we have found to be a new and widely applicable description of diversity patterns. The marine diversity spectrum...... is predicted to be approximately linear across an asymptotic mass range spanning seven orders of magnitude. Slope -0 center dot 5 is predicted for the global marine diversity spectrum for all combined pelagic zones of continental shelf seas, and slopes for large regions are predicted to lie between -0 center...

  20. Marine biodiversity in Colombia

    International Nuclear Information System (INIS)

    Diaz, Juan Manuel


    One decade ago, the seas and oceans were considered biologically less diverse that the terrestrial environment. Now it is known that it is on the contrary; 33 of the 34 categories of animals (phylum), they are represented in the sea, compared with those solely 15 that exist in earth. The investigation about the diversity of life in the sea has been relatively scorned, but there are big benefits that we can wait if this is protected. The captures of fish depend on it; the species captured by the fisheries are sustained of the biodiversity of their trophic chains and habitats. The marine species are probably the biggest reservoir of chemical substances that can be used in pharmaceutical products. The genetic material of some species can be useful in biotechnical applications. The paper treats topics like the current state of the knowledge in marine biodiversity and it is done a diagnostic of the marine biodiversity in Colombia

  1. Marine biosurfaces research program (United States)

    The Office of Naval Research (ONR) of the U.S. Navy is starting a basic research program to address the initial events that control colonization of surfaces by organisms in marine environments. The program “arises from the Navy's need to understand and ultimately control biofouling and biocorrosion in marine environments,” according to a Navy announcement.The program, “Biological Processes Controlling Surface Modification in the Marine Environment,” will emphasize the application of in situ techniques and modern molecular biological, biochemical, and biophysical approaches; it will also encourage the development of interdisciplinary projects. Specific areas of interest include sensing and response to environmental surface (physiology/physical chemistry), factors controlling movement to and retention at surfaces (behavior/hydrodynamics), genetic regulation of attachment (molecular genetics), and mechanisms of attachment (biochemistry/surface chemistry).

  2. Marine-Design Education

    DEFF Research Database (Denmark)

    Andersen, Poul; Birmingham, R.; Sortland, B.


    This report addresses Marine-Design Education in view of present and forecasted demands of the maritime industry, determined by a drastically transforming economic and technological maritime environment. In this framework, this report discusses in depth IT-based Marine Design education (par. 4......) and reveals innovative educational concepts and initiatives, such as the EiT (Experts in a Team) concept (par. 3), the SFS (Student Friendly Software) initiative (par. 5), Education Driven Research (EDR, par. 6) and Research Based Education (RBE, par. 6). Nevertheless, the paper stresses the need...... for continuity between traditional and modern ways of teaching (par. 4) and points out that Marine Design education is not only about Design, but should also address project/business administration and decision making issues (par. 7)....

  3. Three-dimensional primate molar enamel thickness. (United States)

    Olejniczak, Anthony J; Tafforeau, Paul; Feeney, Robin N M; Martin, Lawrence B


    Molar enamel thickness has played an important role in the taxonomic, phylogenetic, and dietary assessments of fossil primate teeth for nearly 90 years. Despite the frequency with which enamel thickness is discussed in paleoanthropological discourse, methods used to attain information about enamel thickness are destructive and record information from only a single plane of section. Such semidestructive planar methods limit sample sizes and ignore dimensional data that may be culled from the entire length of a tooth. In light of recently developed techniques to investigate enamel thickness in 3D and the frequent use of enamel thickness in dietary and phylogenetic interpretations of living and fossil primates, the study presented here aims to produce and make available to other researchers a database of 3D enamel thickness measurements of primate molars (n=182 molars). The 3D enamel thickness measurements reported here generally agree with 2D studies. Hominoids show a broad range of relative enamel thicknesses, and cercopithecoids have relatively thicker enamel than ceboids, which in turn have relatively thicker enamel than strepsirrhine primates, on average. Past studies performed using 2D sections appear to have accurately diagnosed the 3D relative enamel thickness condition in great apes and humans: Gorilla has the relatively thinnest enamel, Pan has relatively thinner enamel than Pongo, and Homo has the relatively thickest enamel. Although the data set presented here has some taxonomic gaps, it may serve as a useful reference for researchers investigating enamel thickness in fossil taxa and studies of primate gnathic biology.

  4. 226Ra chronology of a coastal marine sediment

    International Nuclear Information System (INIS)

    Koide, M.; Bruland, K.; Goldberg, E.D.


    Unsupported 226 Ra (tsub (1/2) = 1620 years) in marine sediments can provide a basis for measuring rates of accumulation of the order of centimeters per thousand years. The excess radium apparently enters the sediments incorporated in phytoplankton. The sensitivity of the method depends upon the initial value of the unsupported 226 Ra and of the value of 230 Th, a parent of 226 Ra, in the sedimentary components. 226 Ra dating was applied to a sediment taken from the slope of the San Clemente Basin in the Southern California coastal region. Rates of sedimentation over two half-lives of the nuclide were found to be either 5.2 or 5.3 cm/1000 years depending upon which of two models for the geochronology is used. One model assumes that the 230 Th brings to the deposit an amount of 226 Ra in equilibrium with it. The other is based upon the growth of the 226 Ra from the 230 Th in the sedimentary components. 238+239 Pu and 210 Pb levels in the upper strata indicated sedimentation rates of the order of 100-500 cm/1000 years, i.e. much faster accumulations. It is suggested that these derived rates are spurious and reflect bioturbative activities of surface-living organisms. (Auth.)

  5. Events Calendar: Smithsonian Marine Ecosystems Exhibit: Smithsonian Marine (United States)

    current Smithsonian research on the plants and animals of the Indian River Lagoon and marine environments Station (SMS) at Fort Pierce Smithsonian Marine Station at Fort Pierce Website Search Box History Modeling Ecosystems Virtual Tour Facebook Instagram Twitter SMS Home › Smithsonian Marine

  6. New Waves in Marine Science Symposium: Marine Animal Communication. (United States)

    Allen, Betty, Comp.


    Presented are the abstracts from three research projects on marine social systems which were a part of a marine science symposium. Five sets of activities on marine animal communication are included, one each for grades K-2, 3-5, 6-8 and 9-12, and informal education. (CW)

  7. 75 FR 19670 - Marine Highway Projects (United States)


    ... DEPARTMENT OF TRANSPORTATION Maritime Administration Marine Highway Projects ACTION: Solicitation of applications for Marine highway projects. SUMMARY: The Department of Transportation is soliciting applications for Marine Highway Projects as specified in the America's Marine Highway Program Final Rule, MARAD...

  8. Method of working thick beds

    Energy Technology Data Exchange (ETDEWEB)

    Giezynski, A; Bialasik, A; Krawiec, A; Wylenzek, A


    The patented method of working thick coal beds in layers consists of creating in the collapsed rocks or from the fill material a bearing rock plate by strengthening these rocks with a hardening composition made of wastes of raw material, resin and water injected into the rock through wells. The difference in the suggestion is that through boreholes drilled in the lower part of the rock roofing on a previously calculated network, a solution is regularly injected which consists of dust wastes obtained in electric filters during production of clinker from mineral raw material in a quantity of 60-70% by volume, wastes of open-hearth production in a quantity of 15-20% and natural sand in a quantity of 15-20%, and water in a quantity of 35-55% of the volume of mineral components. In the second variant, the injected compostion contains: wastes from production of clinker 55-57%, open-hearth wastes 20-23%, natural sand 12-14%, asbestos fine particles 7-8% and water 38-45% of the volume of mineral components. In addition, the difference is that in the boreholes drilled in the coal block directly under the roofing, a composition is injected which consists of natural sand and catalyst in the form of powder and individually supplied liquid synthetic resin in a quantity of 3-5% by weight in relation to the sand. The hardening time with normal temperature is 1-1.5 h, after which strength is reached of 80 kg-f/cm/sup 2/.

  9. Weathering of Igneous, Metamorphic, and Sedimentary Rocks in a Semi-arid Climate - An Engineering Application of Petrology (United States)

    Harrison, W. J.; Wendlandt, R. F.


    Over the last 10 years, analytical methods have been introduced to students in CSM's undergraduate geological engineering program through a multi-year and multi-course approach. Beginning with principles and simple applications of XRD and SEM in sophomore Mineralogy and building on these skills in subsequent junior and senior year courses, geological engineers acquire proficiency in analytical methods. Essential workplace skills are thus acquired without adding an extra course in the undergraduate program. The following exercise is completed by juniors in an integrated Ig.-Met.-Sed. petrology course. The identification of clay mineral assemblages in soils provides a unique opportunity to demonstrate how basic principles of petrology and geochemistry are applied to engineering design criteria in construction site preparation. Specifically, the problem investigates the conditions leading to the formation of smectite in soils and the resulting construction risk due to soil expansion. Students examine soils developed on igneous, metamorphic, and sedimentary rocks near Denver, Colorado. The field locations are areas of suburban growth and several have expansive soil problems. The 2-week exercise includes sample collection, description, and preparation, determining clay mineralogy by XRD, and measurement of Atterberg Plasticity Indices. Teaching materials may be found at: This exercise accomplishes three objectives: First, skills in XRD analysis are developed by introducing students to concepts of particle size separation, particle orientation, and sequential analysis steps which are standard practices in clay characterization. Second, lecture material on the geochemistry of weathering of different rock types is reinforced. Students interpret the origin of clay mineral assemblages developed in soils derived from Precambrian gneisses, lower Paleozoic feldspathic sandstones, upper Paleozoic marine shales, and Tertiary

  10. The biology of marine plants

    National Research Council Canada - National Science Library

    Dring, M.J


    Since over 90% of the species of marine plants are algae, most of the book is devoted to the marine representatives of this group, with examples from all oceans and coasts of the world where detailed work has been done...

  11. Antifouling Compounds from Marine Invertebrates. (United States)

    Qi, Shu-Hua; Ma, Xuan


    In this review, a comprehensive overview about the antifouling compounds from marine invertebrates is described. In total, more than 198 antifouling compounds have been obtained from marine invertebrates, specifically, sponges, gorgonian and soft corals.

  12. Antifouling Compounds from Marine Invertebrates


    Qi, Shu-Hua; Ma, Xuan


    In this review, a comprehensive overview about the antifouling compounds from marine invertebrates is described. In total, more than 198 antifouling compounds have been obtained from marine invertebrates, specifically, sponges, gorgonian and soft corals.

  13. The Danish Marine Monitoring System

    DEFF Research Database (Denmark)

    Ærtebjerg, G.


    Indeholder abstracts fra Workshop on Marine Monitoring Systems and Technology, Risø, 17-18 April 1996.......Indeholder abstracts fra Workshop on Marine Monitoring Systems and Technology, Risø, 17-18 April 1996....

  14. 76 FR 25308 - Marine Mammals (United States)


    ...-XA165 Marine Mammals AGENCY: National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric... Jennifer Burns, Ph.D., University of Alaska Anchorage, Biology Department, 3101 Science Circle, Anchorage, AK, has been issued a permit to conduct [[Page 25309

  15. Modeling geomorphic changes in sedimentary rock areas. A case study in the Boso Peninsula area, Central Japan

    International Nuclear Information System (INIS)

    Hanatani, Ikuo; Munakata, Masahiro; Kimura, Hideo; Sanga, Tomoji


    For the long-term safety of geological disposal of high-level radioactive wastes, evaluation of the radionuclide migration toward the human environment associated with groundwater flow is an issue of utmost importance. Therefore, we are carrying out a program for developing methods for assessing long-term groundwater flow in regional scales. As a part of the above program, we constructed models depicting the influences of geomorphological evolution on long-term groundwater flow. This was done by reconstructing the processes of river deepening with historical simulation of the profiles of four rivers in the Boso Peninsula. This area was selected because the sedimentary rocks are widely distributed with uncomplicated topography and geological structure which enabled the acquisition of a large amount of relevant geological information. The study resulted in the sum of erosion during the past 125,000 years which is the equivalent of one glacial to interglacial cycle. Consequently, the profiles of four rivers during the last glacial age to the present were successfully reconstructed using similar parameters. Also it was found that, in this area, the profiles were sculpted in accordance with the uplifting rates with very little influence of initial topography owing to the relatively soft and easily dissected characteristics of the geological units. However, detailed investigation revealed that the effects of geomorphological evolution differ between the rivers emptying into the inner bay and the rivers emptying into the open sea. In the case of the former two rivers, the river-bed elevation hardly changed during the 125,000 years and shows an extensive concave profile including the marine area. In the latter case, the elevation changed within the range of 20-30 m during the period and a convex profile appears in the marine area where the present water depth is over 30 m. Additionally the estimates of total amount of erosion during 125,000 years in the former group were

  16. Characteristics of the thick, compound refractive lens

    International Nuclear Information System (INIS)

    Pantell, Richard H.; Feinstein, Joseph; Beguiristain, H. Raul; Piestrup, Melvin A.; Gary, Charles K.; Cremer, Jay T.


    A compound refractive lens (CRL), consisting of a series of N closely spaced lens elements each of which contributes a small fraction of the total focusing, can be used to focus x rays or neutrons. The thickness of a CRL can be comparable to its focal length, whereupon a thick-lens analysis must be performed. In contrast with the conventional optical lens, where the ray inside the lens follows a straight line, the ray inside the CRL is continually changing direction because of the multiple refracting surfaces. Thus the matrix representation for the thick CRL is quite different from that for the thick optical lens. Principal planes can be defined such that the thick-lens matrix can be converted to that of a thin lens. For a thick lens the focal length is greater than for a thin lens with the same lens curvature, but this lengthening effect is less for the CRL than for the conventional optical lens

  17. Histopathology of Marine and Freshwater Fish Lymphocytosis Disease Virus (LCDV)

    International Nuclear Information System (INIS)

    Hossain, M.; Myung-Joo, Oh


    Lymphocytosis disease (LCD) in fishes is caused by the agent called lymphocytosis disease virus (LCDV). LCDV is a chronic and benign virus. The disease affects 96 species of marine and fresh water fishes ranged among 34 families in the world. Affected fish with LCD has a typical external symptom with clusters consisted of enormously hypertrophied dermal cells on the skin and fins. The hypertrophied cells, generally named lymphocytosis cells, have a thick hyaline capsule, an enlarged nucleus and prominent basophilic cytoplasmic inclusions. Among the four species of fishes, olive flounder Paralichthys olivaceus, and rockfish Sebastes schlegeli were marine cultured fish, and gourami Trichogaster leeri and painted glass fish Channa baculis were freshwater ornamental fish. Although LCD causes low mortality, the disfigurement of infected fish can make them unsellable. Thus LCD has resulted in an important economic loss in the aquaculture industry. This study of histopathology may be adequate for a presumptive diagnosis of lymphocytosis diseases both in marine and freshwater fish species. (author)


    Using the Sediment Quality Triad (SQT) Approach to Assess Sedimentary Contamination in the Anacostia River, Washington, D.C. Velinsky, DJ*1, Ashley, JTF1,2, Pinkney, F.3, McGee, BL3 and Norberg-King, TJ.4 1Academy of Natural Sciences-PCER, Philadelphia, PA. 2Philadelphia Universi...

  19. Advancements in Exploration and In-Situ Recovery of Sedimentary-Hosted Uranium

    International Nuclear Information System (INIS)

    Maerten, Horst; Marsland-Smith, Andrea; Ross, Jonathan; Haschke, Michael; Kalka, Harald; Schubert, Jens


    Context and Outline: • ISR feasibility – determining factors: – What counts?; • High-resolution shallow seismic: – Methodology from ‘oil & gas hunting’ adapted to mineral exploration in sedimentary basins; • New down-hole logging tool: – Advanced PFN technology combined with lithologic logging; • Moving theory to practice: – Reactive-transport modelling for optimizing ISR

  20. Underground Research Laboratories for Crystalline Rock and Sedimentary Rock in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Shigeta, N.; Takeda, S.; Matsui, H.; Yamasaki, S.


    The Japan Nuclear Cycle Development Institute (JNC) has started two off-site (generic) underground research laboratory (URL) projects, one for crystalline rock as a fractured media and the other for sedimentary rock as a porous media. This paper introduces an overview and current status of these projects.