Thermal-hydraulic and neutron-physical characteristics of a new SCWR fuel assembly

International Nuclear Information System (INIS)

Liu, X.J.; Cheng, X.

2009-01-01

A new fuel assembly design for a thermal supercritical water cooled reactor (SCWR) core is proposed. Compared to the existing fuel assemblies, the present fuel assembly has two-rows of fuel rods between the moderator channels, to achieve a more uniform moderation for all fuel rod cells, and subsequently, a more uniform radial power distribution. In addition, a neutron-kinetics/thermal-hydraulics coupling method is developed, to analyze the neutron-physical and thermal-hydraulic behavior of the fuel assembly designs. This coupling method is based on the sub-channel analysis code COBRA-IV for thermal-hydraulics and the neutron-kinetics code SKETCH-N for neutron-physics. Both the COBRA-IV code and the SKETCH-N code are accordingly modified. An interface is established for the data transfer between these two codes. This coupling method is applied to both the one-row fuel assemblies (previous design) and the two-row fuel assemblies (present design). The performance of the two types of fuel assemblies is compared. The results show clearly that the two-row fuel assembly has more favorable neutron-physical and thermal-hydraulic characteristics than the one-row fuel assembly. The effect of various parameters on the fuel assembly performance is discussed. The coupling method is proven to be well suitable for further applications to SCWR fuel assembly design analysis

Influence of buildings geometrical and physical parameters on thermal cooling load

International Nuclear Information System (INIS)

Melo, C.

1980-09-01

A more accurate method to evaluate the thermal cooling load in buildings and to analyze the influence of geometrical and physical parameters on air conditioning calculations is presented. The sensitivity of the cooling load, considering the thermal capacity of the materials, was simulated in a computer for several different situations. (Author) [pt

Determining the thermal and physicals properties of oil processing products

Directory of Open Access Journals (Sweden)

Viktoria I. Kryvda

2015-03-01

Full Text Available In the last decades both technological process’ improvement and primary energy resources saving are the main tasks of oil refineries. Using various oil products does impose an accurate knowledge of their properties. The dispersion analysis applied makes possible to construct a model simulating the primary oil refining products’ and raw materials’ thermal physical properties. As a result of data approximation there were obtained polynomials with coefficients differing from attributable to the studied oil products fractions. The research represents graphic dependences of thermal physical properties on temperature values for diesel oil fraction. The linear character of density and calorific capacity dependencies from temperature is represented with a proportional error in calculations. The relative minimum error is below 2% that confirms the implemented calculations’ adequacy. The resulting model can be used in calculations for further technological process improvements.

A method to measure the thermal-physical parameter of gas hydrate in porous media

Energy Technology Data Exchange (ETDEWEB)

Diao, S.B.; Ye, Y.G.; Yue, Y.J.; Zhang, J.; Chen, Q.; Hu, G.W. [Qingdao Inst. of Marine Geology, Qingdao (China)

2008-07-01

It is important to explore and make good use of gas hydrates through the examination of the thermal-physical parameters of sediment. This paper presented a new type of simulation experiment using a device that was designed based on the theories of time domain reflection and transient hot wire method. A series of investigations were performed using this new device. The paper described the experiment, with reference to the experiment device and materials and method. It also presented the results of thermal physical properties; result of the thermal conductivity of water, dry sand and wet sand; and results of wet sand under various pressures. The time domain reflection (TDR) method was utilized to monitor the saturation of the hydrates. Both parallel hot-wire method and cross hot-wire method were utilized to measure the thermal conductivity of the gas hydrate in porous media. A TDR sensor which was equipped with both cross hot-wire probe and parallel hot-wire probe was developed in order to measure the cell temperature with these two methods at one time. It was concluded that the TDR probe could be taken as an online measurement skill in investigating the hydrate thermal physical property in porous media. The TDR sensor could monitor the hydrate formation process and the parallel hot-wire method and cross hot-wire method could effectively measure the thermal physical properties of the hydrates in porous media. 10 refs., 7 figs.

Impact of measurable physical phenomena on contact thermal comfort

Science.gov (United States)

Fojtlín, Miloš; Pokorný, Jan; Fišer, Jan; Toma, Róbert; Tuhovčák, Ján

Cabin HVAC (Heating Ventilation and Air-conditioning) systems have become an essential part of personal vehicles as demands for comfortable transport are still rising. In fact, 85 % of the car trips in Europe are shorter than 18 km and last only up to 30 minutes. Under such conditions, the HVAC unit cannot often ensure desired cabin environment and passengers are prone to experience thermal stress. For this reason, additional comfort systems, such as heated or ventilated seats, are available on the market. However, there is no straightforward method to evaluate thermal comfort at the contact surfaces nowadays. The aim of this work is to summarise information about heated and ventilated seats. These technologies use electrical heating and fan driven air to contact area in order to achieve enhanced comfort. It is also expected, that such measures may contribute to lower energy consumption. Yet, in real conditions it is almost impossible to measure the airflow through the ventilated seat directly. Therefore, there is a need for an approach that would correlate measurable physical phenomena with thermal comfort. For this reason, a method that exploits a measurement of temperatures and humidity at the contact area is proposed. Preliminary results that correlate comfort with measurable physical phenomena are demonstrated.

Impact of measurable physical phenomena on contact thermal comfort

Directory of Open Access Journals (Sweden)

Fojtlín Miloš

2017-01-01

Full Text Available Cabin HVAC (Heating Ventilation and Air-conditioning systems have become an essential part of personal vehicles as demands for comfortable transport are still rising. In fact, 85 % of the car trips in Europe are shorter than 18 km and last only up to 30 minutes. Under such conditions, the HVAC unit cannot often ensure desired cabin environment and passengers are prone to experience thermal stress. For this reason, additional comfort systems, such as heated or ventilated seats, are available on the market. However, there is no straightforward method to evaluate thermal comfort at the contact surfaces nowadays. The aim of this work is to summarise information about heated and ventilated seats. These technologies use electrical heating and fan driven air to contact area in order to achieve enhanced comfort. It is also expected, that such measures may contribute to lower energy consumption. Yet, in real conditions it is almost impossible to measure the airflow through the ventilated seat directly. Therefore, there is a need for an approach that would correlate measurable physical phenomena with thermal comfort. For this reason, a method that exploits a measurement of temperatures and humidity at the contact area is proposed. Preliminary results that correlate comfort with measurable physical phenomena are demonstrated.

Street greenery and its physical and psychological impact on outdoor thermal comfort

NARCIS (Netherlands)

Klemm, W.; Heusinkveld, B.G.; Lenzholzer, S.; Hove, van B.

2015-01-01

This study focuses on the benefits of street greenery for creating thermally comfortable streetscapes in moderate climates. It reports on investigations on the impact of street greenery on outdoor thermal comfort from a physical and psychological perspective. For this purpose, we examined nine

Physical factors affecting the electrically assisted thermal bitumen recovery

Energy Technology Data Exchange (ETDEWEB)

Bogdanov, I.I.; Torres, J.-A.; Kamp, A.M. [CHLOE, University of Pau (France); Corre, B. [CSTJF, Total (France)

2011-07-01

In the heavy oil industry, thermal processes are used to enhance oil recovery by increasing the reservoir temperature which results in better oil mobility. Low frequency heating (LFH) is a technology using electrical conductivity of connate water to propagate current between electrodes, thus generating heat in the reservoir through the Joule effect. During the preheating and production periods, many physical factors may affect the LFH process and the aim of this study was to determine which factors affect the process and how, using a particular pattern of electrodes. Simulations were conducted using the CMG Stars reservoir simulator under different configurations, conditions and parameters. Important physical properties and operational conditions affecting the LFH process were determined and results showed that convection heat, bulk electrical conductivity and power distribution can be improved by salt water circulation. This paper highlighted the physical factors affecting LFH efficiency and these findings will be useful for future process design.

Proceedings of the 10. Meeting on Reactor Physics and Thermal Hydraulics

International Nuclear Information System (INIS)

Santos Bastos, W. dos

1995-01-01

These proceedings presents all the Meeting papers emphasizing specific aspects on reactor physics method, criticality, fuel management, nuclear data, safety analysis, simulation and shielding, neutronics, thermal hydraulics, reactor operation and computational methods

The Application of Cyber Physical System for Thermal Power Plants: Data-Driven Modeling

Directory of Open Access Journals (Sweden)

Yongping Yang

2018-03-01

Full Text Available Optimal operation of energy systems plays an important role to enhance their lifetime security and efficiency. The determination of optimal operating strategies requires intelligent utilization of massive data accumulated during operation or prediction. The investigation of these data solely without combining physical models may run the risk that the established relationships between inputs and outputs, the models which reproduce the behavior of the considered system/component in a wide range of boundary conditions, are invalid for certain boundary conditions, which never occur in the database employed. Therefore, combining big data with physical models via cyber physical systems (CPS is of great importance to derive highly-reliable and -accurate models and becomes more and more popular in practical applications. In this paper, we focus on the description of a systematic method to apply CPS to the performance analysis and decision making of thermal power plants. We proposed a general procedure of CPS with both offline and online phases for its application to thermal power plants and discussed the corresponding methods employed to support each sub-procedure. As an example, a data-driven model of turbine island of an existing air-cooling based thermal power plant is established with the proposed procedure and demonstrates its practicality, validity and flexibility. To establish such model, the historical operating data are employed in the cyber layer for modeling and linking each physical component. The decision-making procedure of optimal frequency of air-cooling condenser is also illustrated to show its applicability of online use. It is concluded that the cyber physical system with the data mining technique is effective and promising to facilitate the real-time analysis and control of thermal power plants.

Ways to improve physical and thermal performance of refractory lining materials

Directory of Open Access Journals (Sweden)

Khlystov A.I.

2017-01-01

Full Text Available Refractory lining materials, which include ceramic refractories and nonfired heat-resistant concretes, have a very short lifespan during the turnaround time measured in years and sometimes months. Therefore, increasing the service life of thermal generating units by 1.5-2 times will bring significant economic benefits. The main factor that determines the durability of refractory lining materials is the thermal resistance. It is possible to increase the thermal resistance by improving such physical and mechanical properties as strength and density. As for the ceramic refractory performance improvement, such technological methods as their structural and chemical modification by phosphate binder impregnation, as well as introduction of phosphate components into the ceramic batches during the molding process increase, in particular, their thermal stability. The use of aluminous and high-alumina cements contributes to a significant increase of not only strength, but also physical and thermal performance of heat-resistant concretes with different fillers. Switching to the use of chemical binders in the compositions of heat-resistant concretes (liquid glass with effective hardeners; silicate-block and phosphate binders enables to develop high-heat resistant materials which do not soften in a wide range of heating temperatures from 400 °С to 1600 °С. The positive results on increasing the thermal resistance of heat-resistant composites can be obtained by reinforcing them with high temperature fibers.

The Relationship between Physical Activity and Thermal Protective Clothing on Functional Balance in Firefighters

Science.gov (United States)

Kong, Pui W.; Suyama, Joe; Cham, Rakie; Hostler, David

2012-01-01

We investigated the relationship between baseline physical training and the use of firefighting thermal protective clothing (TPC) with breathing apparatus on functional balance. Twenty-three male firefighters performed a functional balance test under four gear/clothing conditions. Participants were divided into groups by physical training status,…

Characterization of Physical and Thermal Properties of Biofield Treated Neopentyl Glycol

OpenAIRE

Trivedi , Mahendra Kumar; Tallapragada , Rama Mohan; Branton , Alice; Trivedi , Dahryn; Nayak , Gopal; Mishra , Rakesh; Jana , Snehasis

2015-01-01

International audience; Neopentyl glycol (NPG) has been extensively used as solid-solid phase change materials (PCMs) for thermal energy storage applications. The objective of the present study was to evaluate the impact of biofield treatment on physical, spectral and thermal properties of NPG. The study was performed in two groups (control and treated). The control group remained as untreated, and treatment group was subjected to Mr. Trivedi’s biofield treatment. The control and treated NPG ...

Thermal modeling: at the crossroads of several subjects of physics

International Nuclear Information System (INIS)

1997-01-01

The modeling of thermal phenomena is of prime importance for the dimensioning of industrial facilities. However, the understanding of thermal processes requires to refer to other subjects of physics like electromagnetism, matter transformation, fluid mechanics, chemistry etc.. The aim of this workshop organized by the industrial electro-thermal engineering section of the French society of thermal engineers is to take stock of current or forthcoming advances in the coupling of thermal engineering codes with electromagnetic, fluid mechanics, chemical and mechanical engineering codes. The modeling of phenomena remains the essential link between the laboratory research of new processes and their industrial developments. From the 9 talks given during this workshop, 2 of them deal with thermal processes in nuclear reactors and fall into the INIS scope and the others concern the modeling of industrial heating or electrical processes and were selected for ETDE. (J.S.)

Cooling problems of thermal power plants. Physical model studies

International Nuclear Information System (INIS)

Neale, L.C.

1975-01-01

The Alden Research Laboratories of Worcester Polytechnic Institute has for many years conducted physical model studies, which are normally classified as river or structural hydraulic studies. Since 1952 one aspect of these studies has involved the heated discharge from steam power plants. The early studies on such problems concentrated on improving the thermal efficiency of the system. This was accomplished by minimizing recirculation and by assuring full use of available cold water supplies. With the growing awareness of the impact of thermal power generation on the environment attention has been redirected to reducing the effect of heated discharges on the biology of the receiving body of water. More specifically the efforts of designers and operators of power plants are aimed at meeting or complying with standards established by various governmental agencies. Thus the studies involve developing means of minimizing surface temperatures at an outfall or establishing a local area of higher temperature with limits specified in terms of areas or distances. The physical models used for these studies have varied widely in scope, size, and operating features. These models have covered large areas with both distorted geometric scales and uniform dimensions. Instrumentations has also varied from simple mercury thermometers to computer control and processing of hundreds of thermocouple indicators

Nanofluid two-phase flow and thermal physics: a new research frontier of nanotechnology and its challenges.

Science.gov (United States)

Cheng, Lixin; Bandarra Filho, Enio P; Thome, John R

2008-07-01

Nanofluids are a new class of fluids engineered by dispersing nanometer-size solid particles in base fluids. As a new research frontier, nanofluid two-phase flow and thermal physics have the potential to improve heat transfer and energy efficiency in thermal management systems for many applications, such as microelectronics, power electronics, transportation, nuclear engineering, heat pipes, refrigeration, air-conditioning and heat pump systems. So far, the study of nanofluid two-phase flow and thermal physics is still in its infancy. This field of research provides many opportunities to study new frontiers but also poses great challenges. To summarize the current status of research in this newly developing interdisciplinary field and to identify the future research needs as well, this paper focuses on presenting a comprehensive review of nucleate pool boiling, flow boiling, critical heat flux, condensation and two-phase flow of nanofluids. Even for the limited studies done so far, there are some controversies. Conclusions and contradictions on the available nanofluid studies on physical properties, two-phase flow, heat transfer and critical heat flux (CHF) are presented. Based on a comprehensive analysis, it has been realized that the physical properties of nanofluids such as surface tension, liquid thermal conductivity, viscosity and density have significant effects on the nanofluid two-phase flow and heat transfer characteristics but the lack of the accurate knowledge of these physical properties has greatly limited the study in this interdisciplinary field. Therefore, effort should be made to contribute to the physical property database of nanofluids as a first priority. Secondly, in particular, research on nanofluid two-phase flow and heat transfer in microchannels should be emphasized in the future.

Characterization of Physical and Thermal Properties of Biofield Treated Neopentyl Glycol

OpenAIRE

Trivedi, Dahryn; Trivedi, Mahendra Kumar; Branton, Alice; Nayak, Gopal

2015-01-01

Neopentyl glycol (NPG) has been extensively used as solid-solid phase change materials (PCMs) for thermal energy storage applications. The objective of the present study was to evaluate the impact of biofield treatment on physical, spectral and thermal properties of NPG. The study was performed in two groups (control and treated). The control group remained as untreated, and treatment group was subjected to Mr. Trivedi’s biofield treatment. The control and treated NPG were characterized by X-...

Probabilistic analysis of strength and thermal-physic WWER fuel rod characteristics using START-3 code

International Nuclear Information System (INIS)

Medvedev, A.; Bogatyr, S.; Khramtsov; Sokolov, F.

2001-01-01

During the last years probabilistic methods for evaluation of the influence of the fuel geometry and technology parameters on fuel operational reliability are widely used. In the present work the START-3 procedure is used to calculate the thermal physics and strength characteristics of WWER fuel rods behavior. The procedure is based on the Monte-Carlo method with the application of Sobol quasi-random sequences. This technique allows to treat the fuel rod technological and operating parameters as well as its strength and thermal physics characteristics as random variables. The work deals with a series of WWER-1000 fuel rod statistical tests and verification based on the PIE results. Also preliminary calculations are implemented with the aim to determine the design schema parameters. This should ensure the accuracy of the assessment of the parameters of WWER fuel rod characteristics distribution. The probability characteristics of fuel rod strength and thermal physics are assessed via the statistical analysis of the results of probability calculations

Statistical Physics

CERN Document Server

Wannier, Gregory Hugh

1966-01-01

Until recently, the field of statistical physics was traditionally taught as three separate subjects: thermodynamics, statistical mechanics, and kinetic theory. This text, a forerunner in its field and now a classic, was the first to recognize the outdated reasons for their separation and to combine the essentials of the three subjects into one unified presentation of thermal physics. It has been widely adopted in graduate and advanced undergraduate courses, and is recommended throughout the field as an indispensable aid to the independent study and research of statistical physics.Designed for

Mathematical and physical modeling of thermal stratification phenomena in steel ladles

Science.gov (United States)

Putan, V.; Vilceanu, L.; Socalici, A.; Putan, A.

2018-01-01

By means of CFD numerical modeling, a systematic analysis of the similarity between steel ladles and hot-water model regarding natural convection phenomena was studied. The key similarity criteria we found to be dependent on the dimensionless numbers Fr and βΔT. These similarity criteria suggested that hot-water models with scale in the range between 1/5 and 1/3 and using hot water with temperature of 45 °C or higher are appropriate for simulating natural convection in steel ladles. With this physical model, thermal stratification phenomena due to natural convection in steel ladles were investigated. By controlling the cooling intensity of water model to correspond to the heat loss rate of steel ladles, which is governed by Fr and βΔT, the temperature profiles measured in the water bath of the model were to deduce the extent of thermal stratification in liquid steel bath in the ladles. Comparisons between mathematically simulated temperature profiles in the prototype steel ladles and those physically simulated by scaling-up the measured temperatures profiles in the water model showed good agreement. This proved that it is feasible to use a 1/5 scale water model with 45 °C hot water to simulate natural convection in steel ladles. Therefore, besides mathematical CFD models, the physical hot-water model provided an additional means of studying fluid flow and heat transfer in steel ladles.

Speed of thermal expansion of a long, thin insulating bar and the physical momentum of acoustic phonons

International Nuclear Information System (INIS)

Lee, Y C

2008-01-01

Thermal expansion is an everyday phenomenon. One would naturally be curious to see how fast the expansion proceeds. While the theory of thermal expansion in statistical thermal equilibrium is well known, the time-dependent process during thermal expansion is a more complex statistical dynamical problem. Contrary to intuitive expectations, it will be seen that the dynamical expansion process is generally different from the process of merely establishing temperature equilibration (thermal-kinetic equilibrium) because two vastly disparate timescales are at work. It will be shown that the finite speed of thermal expansion hinges upon a recently derived result that an acoustic phonon of wavevector q-vector≠0 does carry a finite physical momentum; it arises from anharmonicity, provided translational symmetry is broken. While the eventual mathematical formulation seems pedestrian, it is arrived at after several layers of physical thinking. Our final result shows that the time required for thermal expansion of a thin bar of length L by ΔL due to a given temperature increase ΔT is given by Δt L ∝ (L/ΔL) (L/c s ), where c s is the speed of sound. Its physical origin as well as its classical and quantum limits are fully discussed

Physical Properties and Thermal Decomposition of Aqueous Solutions of 2-Amino-2-hydroxymethyl-1, 3-propanediol (AHPD)

Science.gov (United States)

Murshid, Ghulam; Shariff, Azmi Mohd; Lau, K. K.; Bustam, Mohammad Azmi; Ahmad, Faizan

2011-10-01

Physical properties such as density, viscosity, refractive index, surface tension, and thermal stability of 2-amino-2-hydroxymethyl-1,3-propanediol (AHPD) were experimentally measured. All the experimental measurements were made over a wide range of temperatures from (298.15 to 333.15) K and AHPD concentrations of (1, 7, 13, 19, and 25) mass%. An overall decrease in all the measured physical properties was observed with increasing temperature. The experimental results are presented as a function of temperature and AHPD mass fraction. All the measured physical properties were correlated as a function of temperature. Thermal decomposition of pure and aqueous solutions of AHPD was investigated using a thermo-gravimetric analyzer (TGA) at a heating rate of 10 K · min-1.

Physical, mechanical and thermal properties of Crushed Sand Concrete containing Rubber Waste

Directory of Open Access Journals (Sweden)

Mohamed Guendouz

2018-01-01

Full Text Available Over the past twenty years, the rubber wastes are an important part of municipal solid waste. This work focuses on the recycling of rubber waste, specifically rubber waste of used shoes discharged into the nature and added in the mass of crushed sand concrete with percentage (10%, 20%, 30% and 40%. The physical (workability, fresh density, mechanical (compressive and flexural strength and thermal (thermal conductivity of different crushed sand concrete made are analyzed and compared to the respective controls. The use of rubber waste in crushed sand concrete contributes to reduce the bulk density and performance of sand concrete. Nevertheless, the use of rubber aggregate leads to a significant reduction in thermal conductivity, which improves the thermal insulation of crushed sand concrete.

Experimental analysis on physical and mechanical properties of thermal shock damage of granite

Directory of Open Access Journals (Sweden)

He Xiao

2017-01-01

Full Text Available The purpose of this study was to explore the changes of mechanical and physical properties of granite under different thermal loading effects. Uniaxial compression experiments studying the rules of the influence of temperature load on mechanical properties of granite were carried out. After high-temperature heating at above 600 °C, granite tended to have stronger ductility and plasticity as well as declined peak stress and compressive strength. Thermogravimetry - differential scanning calorimetry (TG-DSC analysis results showed that, thermal load at different temperatures induced reactions such as water loss, oxidation and crystallization in the microstructure of granite, which led to physical changes of granite. Hence it is concluded that, heating can significantly weaken the mechanical performance of granite, which provides an important support for the optimization of heating assisted processing of granite. It also reveals that, heating assisted cutting technique can effectively lower energy consumption and improve processing efficiency.

[Physical urticaria].

Science.gov (United States)

Fleischer, M; Grabbe, J

2004-04-01

The different types of physical urticaria are triggered by mechanical and thermal stimuli, as well as electromagnetic waves. Localized forms restricted to the skin and mucous membranes are most common, but generalized urticaria with variable extracutaneous manifestations can also occur. Physical urticaria is usually sporadic but may rarely have a familial form; it is often associated with chronic urticaria. In most instances, the short time interval between the physical stimulus and reaction points to a causal relationship, but in delayed types the exact diagnosis may be missed without provocation tests. The clinical implication of physical urticaria is demonstrated by investigations showing a greater degree of disability in affected patients as compared to other types of urticaria. There is still an incomplete understanding of the crucial pathophysiological aspects; most likely inflammatory reactions involving leukocytes, endothelial cells and nerves stimulated by various mediators play an important role in this form of urticaria.

Effect of thermal modification on the physical properties of juvenile and mature woods of Eucalyptus grandis

Directory of Open Access Journals (Sweden)

Fred Willians Calonego

Full Text Available This study aimed to evaluate the effect of thermal treatment on the physical properties of juvenile and mature woods of Eucalyptus grandis. Boards were taken from 30-year-old E. grandis trees. The boards were thermally modified at 180 °C in the Laboratory of Wood Drying and Preservation at UNESP, Botucatu, Sao Paulo state, Brazil. The results showed that thermal modification caused: (1 decrease of 6.8% in the density at 0% equilibrium moisture content of mature wood; (2 significant decreases of 14.7% and 35.6% in the maximum volumetric swellings of juvenile and mature woods, respectively; (3 significant decreases of 13.7% and 21.3% in the equilibrium moisture content of juvenile and mature woods, respectively. The influence of thermal modification in juvenile wood was lower than in mature wood and caused greater uniformity in the physical variations between these types of wood in E. grandis.

Black Versus Gray T-Shirts: Comparison of Spectrophotometric and Other Biophysical Properties of Physical Fitness Uniforms and Modeled Heat Strain and Thermal Comfort

Science.gov (United States)

2016-09-01

PROPERTIES OF PHYSICAL FITNESS UNIFORMS AND MODELED HEAT STRAIN AND THERMAL COMFORT DISCLAIMER The opinions or assertions contained herein are the...SHIRTS: COMPARISON OF SPECTROPHOTOMETRIC AND OTHER BIOPHYSICAL PROPERTIES OF PHYSICAL FITNESS UNIFORMS AND MODELED HEAT STRAIN AND THERMAL COMFORT ...the impact of the environment on the wearer. To model these impacts on human thermal sensation (e.g., thermal comfort ) and thermoregulatory

Thermo-physical stability of fatty acid eutectic mixtures subjected to accelerated aging for thermal energy storage (TES) application

International Nuclear Information System (INIS)

Fauzi, Hadi; Metselaar, Hendrik S.C.; Mahlia, T.M.I.; Silakhori, Mahyar

2014-01-01

The thermo-physical stability of fatty acids eutectic mixtures subjected to accelerated number of melting/solidification processes has been identified using thermal cycling test in this study. Myristic acid/palmitic acid (MA/PA) (70/30, wt.%) and myristic acid/palmitic acid/sodium stearate (MA/PA/SS) (70/30/5, wt.%) were selected as eutectic phase change materials (PCMs) to evaluate their stability of phase transition temperature, latent heat of fusion, chemical structure, and volume changes after 200, 500, 1000, and 1500 thermal cycles. The thermal properties of each eutectic PCMs measured by differential scanning calorimetric (DSC) indicated the phase transition temperature and latent heat of fusion values of MA/PA/SS has a smallest changes after 1500 thermal cycles than MA/PA eutectic mixture. MA/PA/SS also has a better chemical structure stability and smaller volume change which is 1.2%, compared to MA/PA with a volume change of 1.6% after 1500 cycles. Therefore, it is concluded that the MA/PA/SS eutectic mixture is suitable for use as a phase change material in thermal energy storage (TES) such as solar water heating and solar space heating applications. - Highlights: •The prepared MA/PA and MA/PA/SS were used as eutectic phase change materials (PCM). •Thermo-physical reliability of eutectic PCMs evaluated using a thermal cycling test. •MA/PA/SS has a great thermo-physical stability than MA/PA after 1500 thermal cycles

Thermal desorption study of physical forces at the PTFE surface

Science.gov (United States)

Wheeler, D. R.; Pepper, S. V.

1987-01-01

Thermal desorption spectroscopy (TDS) of the polytetrafluoroethylene (PTFE) surface was successfully employed to study the possible role of physical forces in the enhancement of metal-PTFE adhesion by radiation. The thermal desorption spectra were analyzed without assumptions to yield the activation energy for desorption over a range of xenon coverage from less than 0.1 monolayer to more than 100 monolayers. For multilayer coverage, the desorption is zero-order with an activation energy equal to the sublimation energy of xenon. For submonolayer coverages, the order for desorption from the unirradiated PTFE surface is 0.73 and the activation energy for desorption is between 3.32 and 3.36 kcal/mol; less than the xenon sublimation energy. The effect of irradiation is to increase the activation energy for desorption to as high as 4 kcal/mol at low coverage.

Determination of basalt physical and thermal properties at varying temperatures, pressures, and moisture contents. First progress report, fiscal year 1979

International Nuclear Information System (INIS)

Miller, R.J.; Bishop, R.C.

1979-01-01

This report is a summary of the rock mechanics testing done at the Earth Mechanics Institute of the Colorado School of Mines for Rockwell Hanford Operations under Subcontract SA-917. Cores were supplied from drill hole DC-6 on the Hanford Site, characterized geologically, and tested for thermal and physical properties for designing long-term underground storage of radioactive waste materials. This report presents the approved test procedures, results, and data analysis for this test series. Results indicated thermophysical properties similar to those of previously tested basalt cores from the Hanford area, but showed no significant trends; thus, generalizations are risky at this time. However, density was found to be a good guide to thermal and physical properties--higher density basalt cores showed significant improvements in physical and thermal properties

Development of Thermal Radiation Experiments Kit Based on Data Logger for Physics Learning Media

Science.gov (United States)

Permana, H.; Iswanto, B. H.

2018-04-01

Thermal Radiation Experiments Kit (TREK) based on data logger for physics learning media was developed. TREK will be used as a learning medium on the subject of Temperature and Heat to explain the concept of emissivity of a material in grade XI so that it can add variations of experiments which are commonly done such as thermal expansion, transfer of thermal energy (conduction, convection, and radiation), and specific heat capacity. DHT11 sensor is used to measure temperature and microcontroller Arduino-uno used as data logger. The object tested are in the form of coated glass thin films and aluminum with different colors. TREK comes with a user manual and student worksheet (LKS) to make it easier for teachers and students to use. TREK was developed using the ADDIE Development Model (Analyze, Design, Development, Implementation, and Evaluation). And validated by experts, physics teachers, and students. Validation instrument is a questionnaire with a five-item Likert response scale with reviewed aspect coverage: appropriate content and concepts, design, and user friendly. The results showed that TREK was excellent (experts 88.13%, science teachers 95.68%, and students 85.77%).

Modern Physics Simulations

Science.gov (United States)

Brandt, Douglas; Hiller, John R.; Moloney, Michael J.

1995-10-01

The Consortium for Upper Level Physics Software (CUPS) has developed a comprehensive series of Nine Book/Software packages that Wiley will publish in FY `95 and `96. CUPS is an international group of 27 physicists, all with extensive backgrounds in the research, teaching, and development of instructional software. The project is being supported by the National Science Foundation (PHY-9014548), and it has received other support from the IBM Corp., Apple Computer Corp., and George Mason University. The Simulations being developed are: Astrophysics, Classical Mechanics, Electricity & Magnetism, Modern Physics, Nuclear and Particle Physics, Quantum Mechanics, Solid State, Thermal and Statistical, and Wave and Optics.

Thermal lens and interferometric method for glass transition and thermo physical properties measurements in Nd2O3 doped sodium zincborate glass.

Science.gov (United States)

Astrath, N G C; Steimacher, A; Rohling, J H; Medina, A N; Bento, A C; Baesso, M L; Jacinto, C; Catunda, T; Lima, S M; Karthikeyan, B

2008-12-22

In this work the time resolved thermal lens method is combined with interferometric technique, the thermal relaxation calorimetry, photoluminescence and lifetime measurements to determine the thermo physical properties of Nd(2)O(3) doped sodium zincborate glass as a function of temperature up to the glass transition region. Thermal diffusivity, thermal conductivity, fluorescence quantum efficiency, linear thermal expansion coefficient and thermal coefficient of electronic polarizability were determined. In conclusion, the results showed the ability of thermal lens and interferometric methods to perform measurements very close to the phase transition region. These techniques provide absolute values for the measured physical quantities and are advantageous when low scan rates are required.

Observations Of General Learning Patterns In An Upper-Level Thermal Physics Course

Science.gov (United States)

Meltzer, David E.

2009-11-01

I discuss some observations from using interactive-engagement instructional methods in an upper-level thermal physics course over a two-year period. From the standpoint of the subject matter knowledge of the upper-level students, there was a striking persistence of common learning difficulties previously observed in students enrolled in the introductory course, accompanied, however, by some notable contrasts between the groups. More broadly, I comment on comparisons and contrasts regarding general pedagogical issues among different student sub-populations, for example: differences in the receptivity of lower- and upper-level students to diagrammatic representations; varying receptivity to tutorial-style instructional approach within the upper-level population; and contrasting approaches to learning among physics and engineering sub-populations in the upper-level course with regard to use of symbolic notation, mathematical equations, and readiness to employ verbal explanations.

Physical engineering and medical physics on boron neutron capture therapy

International Nuclear Information System (INIS)

Sakurai, Yoshinori

2011-01-01

The contents of physical engineering and medical physics that support boron neutron capture therapy (BNCT) can be roughly classified to the four items, (1) neutron irradiation system, (2) development and improvement of dose assessment techniques, (3) development and improvement of dose planning system, and (4) quality assurance and quality control. This paper introduces the BNCT at Kyoto University Research Reactor Institute, with a focus on the basic physics of BNCT, thermal neutron irradiation and epithermal neutron irradiation, heavy water neutron irradiation facilities of KUR, and medical irradiation system of KUR. It also introduces the world's first BNCT clinical cyclotron irradiation system (C-BENS) of Kyoto University Research Reactor Institute, BNCT dose assessment techniques, dose planning system, and quality assurance and quality control. (A.O.)

The physical environment and occupant thermal perceptions in office buildings. An evaluation of sampled data from five European countries

Energy Technology Data Exchange (ETDEWEB)

Stoops, J L [Chalmers Univ. of Tech., Goeteborg (Sweden). Dept. of Building Services Engineering

2002-02-01

The results from a large field study of thermal comfort in European office buildings are reported. Measurements of physical environmental conditions and occupant perceptions were collected over sixteen months from twenty-six different office buildings located in France, Greece, Portugal, Sweden and the UK. This thesis focuses on the physical environmental measurements and occupant thermal perceptions; however, additional variables with connections to environmental satisfaction are also examined. An overview of human comfort theory is presented to help place this thesis in appropriate context. The overview presents thermal comfort issues within a broad framework of human response to the environment including physical, physiological. behavioural, psychological and other variables. A more narrowly focused overview of current thermal comfort research is also included. The work attempts to show relationships and produce useful information from the data set using graphical methods, especially lowess, a locally weighted regression based scatter plot smoothing technique. The objective of using this approach is to literally show the relationships visually. This approach allows the data set itself to illustrate the actual thermal conditions in European office buildings and the occupant perceptions of those conditions along with illustrating relationships. The data is examined in some detail with key relationships identified and explored. Significant differences between countries, both for the physical conditions and the perceptions of those conditions are identified. In addition, the variation over the course of the year for each country is explored. The relationship of daily average outdoor temperatures to indoor temperatures and indoor temperature perceptions is found to be critically important. The relationships, which appear to drive perceptions of thermal comfort, occur in complex ways, making simple, all encompassing explanations impossible. The nature and size of the

Opposite patterns of change in perception of imagined and physically induced pain over the course of repeated thermal stimulations.

Science.gov (United States)

Gács, B; Szolcsányi, T; Csathó, Á

2017-08-01

Individuals frequently show habituation to repeated noxious heat. However, given the defensive function of human pain processing, it is reasonable to assume that individuals anticipate that they would become increasingly sensitive to repeated thermal pain stimuli. No previous studies have, however, been addressed to this assumption. Therefore, in the current study, we investigated how healthy human individuals imagine the intensity of repeated thermal pain stimulations, and compared this with the intensity ratings given after physically induced thermal pain trials. Healthy participants (N = 20) gave pain intensity ratings in two conditions: imagined and real thermal pain. In the real pain condition, thermal pain stimuli of two intensities (minimal and moderate pain) were delivered in four consecutive trials. The duration of the peak temperature was 20 s, and stimulation was always delivered to the same location. In each trial, participants rated the pain intensity twice, 5 and 15 s after the onset of the peak temperature. In the imagined pain condition, participants were subjected to a reference pain stimulus and then asked to imagine and rate the same sequence of stimulations as in the induced pain condition. Ratings of imagined pain and physically induced pain followed opposite courses over repeated stimulations: Ratings of imagined pain indicated sensitization, whereas ratings for physically induced pain indicated habituation. The findings were similar for minimal and moderate pain intensities. The findings suggest that, rather than habituating to pain, healthy individuals imagine that they would become increasingly sensitive to repeated thermal pain stimuli. This study identified opposite patterns of change in perception of imagined pain (sensitization) and physically induced pain (habituation). The findings show that individuals anticipate that they would become increasingly sensitive to repeated pain stimuli, which might also have clinical implications. �

Physical and JIT Model Based Hybrid Modeling Approach for Building Thermal Load Prediction

Science.gov (United States)

Iino, Yutaka; Murai, Masahiko; Murayama, Dai; Motoyama, Ichiro

Energy conservation in building fields is one of the key issues in environmental point of view as well as that of industrial, transportation and residential fields. The half of the total energy consumption in a building is occupied by HVAC (Heating, Ventilating and Air Conditioning) systems. In order to realize energy conservation of HVAC system, a thermal load prediction model for building is required. This paper propose a hybrid modeling approach with physical and Just-in-Time (JIT) model for building thermal load prediction. The proposed method has features and benefits such as, (1) it is applicable to the case in which past operation data for load prediction model learning is poor, (2) it has a self checking function, which always supervises if the data driven load prediction and the physical based one are consistent or not, so it can find if something is wrong in load prediction procedure, (3) it has ability to adjust load prediction in real-time against sudden change of model parameters and environmental conditions. The proposed method is evaluated with real operation data of an existing building, and the improvement of load prediction performance is illustrated.

Nuclear and Particle Physics Simulations: The Consortium of Upper-Level Physics Software

Science.gov (United States)

Bigelow, Roberta; Moloney, Michael J.; Philpott, John; Rothberg, Joseph

1995-06-01

The Consortium for Upper Level Physics Software (CUPS) has developed a comprehensive series of Nine Book/Software packages that Wiley will publish in FY `95 and `96. CUPS is an international group of 27 physicists, all with extensive backgrounds in the research, teaching, and development of instructional software. The project is being supported by the National Science Foundation (PHY-9014548), and it has received other support from the IBM Corp., Apple Computer Corp., and George Mason University. The Simulations being developed are: Astrophysics, Classical Mechanics, Electricity & Magnetism, Modern Physics, Nuclear and Particle Physics, Quantum Mechanics, Solid State, Thermal and Statistical, and Wave and Optics.

Applied building physics

CERN Document Server

Hens, Hugo S L C

2012-01-01

The energy crises of the 1970s, persisting moisture problems, complaints about sick buildings, thermal, visual and olfactory discomfort, and the move towards more sustainability in building construction have pushed Building Physics to the forefront of building innovation. The societal pressure to diminish energy consumption in buildings without impairing usability acted as a trigger to activate the whole notion of performance based design and construction. As with all engineering sciences, Building Physics is oriented towards application, which is why, after a first book on fundamentals this s

Kinetics of Thermally Activated Physical Processes in Disordered Media

Directory of Open Access Journals (Sweden)

Bertrand Poumellec

2015-07-01

Full Text Available We describe a framework for modeling the writing and erasure of thermally-distributed activated processes that we can specifically apply to UV-induced refractive index change, particularly in fibers. From experimental measurements (isochrons and/or isotherms, this framework allows to find the distribution function of the activation energy by providing only a constant, which can be determined by a simple variable change when a few assumptions are fulfilled. From this modeling, it is possible to know the complete evolution in time of the system. It is also possible to determine the annealing conditions for extending a lifetime. This approach can also be used for other physical quantities, such as photodarkening, stress relaxation, and luminescence decay, provided that it can be described by a distribution function.

Foundations of high-energy-density physics physical processes of matter at extreme conditions

CERN Document Server

Larsen, Jon

2017-01-01

High-energy-density physics explores the dynamics of matter at extreme conditions. This encompasses temperatures and densities far greater than we experience on Earth. It applies to normal stars, exploding stars, active galaxies, and planetary interiors. High-energy-density matter is found on Earth in the explosion of nuclear weapons and in laboratories with high-powered lasers or pulsed-power machines. The physics explored in this book is the basis for large-scale simulation codes needed to interpret experimental results whether from astrophysical observations or laboratory-scale experiments. The key elements of high-energy-density physics covered are gas dynamics, ionization, thermal energy transport, and radiation transfer, intense electromagnetic waves, and their dynamical coupling. Implicit in this is a fundamental understanding of hydrodynamics, plasma physics, atomic physics, quantum mechanics, and electromagnetic theory. Beginning with a summary of the topics and exploring the major ones in depth, thi...

University Physics Students' Ideas of Thermal Radiation Expressed in Open Laboratory Activities Using Infrared Cameras

Science.gov (United States)

Haglund, Jesper; Melander, Emil; Weiszflog, Matthias; Andersson, Staffan

2017-01-01

Background: University physics students were engaged in open-ended thermodynamics laboratory activities with a focus on understanding a chosen phenomenon or the principle of laboratory apparatus, such as thermal radiation and a heat pump. Students had access to handheld infrared (IR) cameras for their investigations. Purpose: The purpose of the…

Integrating Condensed Matter Physics into a Liberal Arts Physics Curriculum

Science.gov (United States)

Collett, Jeffrey

2008-03-01

The emergence of nanoscale science into the popular consciousness presents an opportunity to attract and retain future condensed matter scientists. We inject nanoscale physics into recruiting activities and into the introductory and the core portions of the curriculum. Laboratory involvement and research opportunity play important roles in maintaining student engagement. We use inexpensive scanning tunneling (STM) and atomic force (AFM) microscopes to introduce students to nanoscale structure early in their college careers. Although the physics of tip-surface interactions is sophisticated, the resulting images can be interpreted intuitively. We use the STM in introductory modern physics to explore quantum tunneling and the properties of electrons at surfaces. An interdisciplinary course in nanoscience and nanotechnology course team-taught with chemists looks at nanoscale phenomena in physics, chemistry, and biology. Core quantum and statistical physics courses look at effects of quantum mechanics and quantum statistics in degenerate systems. An upper level solid-state physics course takes up traditional condensed matter topics from a structural perspective by beginning with a study of both elastic and inelastic scattering of x-rays from crystalline solids and liquid crystals. Students encounter reciprocal space concepts through the analysis of laboratory scattering data and by the development of the scattering theory. The course then examines the importance of scattering processes in band structure and in electrical and thermal conduction. A segment of the course is devoted to surface physics and nanostructures where we explore the effects of restricting particles to two-dimensional surfaces, one-dimensional wires, and zero-dimensional quantum dots.

Microstructural development in physical vapour-deposited partially stabilized zirconia thermal barrier coatings

Energy Technology Data Exchange (ETDEWEB)

Sohn, Y. H. (Center for Intelligent Processing of Materials, Worcester Polytechnic Institute, 100 Institute Road, Worcester, MA 01609-2280 (United States)); Biederman, R.R. (Center for Intelligent Processing of Materials, Worcester Polytechnic Institute, 100 Institute Road, Worcester, MA 01609-2280 (United States)); Sisson, R.D. Jr. (Center for Intelligent Processing of Materials, Worcester Polytechnic Institute, 100 Institute Road, Worcester, MA 01609-2280 (United States))

1994-10-01

The effects of processing parameters of physical vapour deposition on the microstructure of partially stabilized zirconia (PSZ) thermal barrier coatings have been experimentally investigated. Emphasis has been placed on the crystallographic texture of the PSZ coatings and the microstructure of the top surface of the PSZ coatings as well as the metal-ceramic interface. The variations in the deposition chamber temperature, substrate thickness, substrate rotation and vapour incidence angle resulted in the observation of significant differences in the crystallographic texture and microstructure of the PSZ coatings. ((orig.))

Solid State Physics Introduction to the Theory

CERN Document Server

Patterson, James D

2007-01-01

Learning Solid State Physics involves a certain degree of maturity, since it involves tying together diverse concepts from many areas of physics. The objective is to understand, in a basic way, how solid materials behave. To do this one needs both a good physical and mathematical background. One definition of Solid State Physics is it is the study of the physical (e.g. the electrical, dielectric, magnetic, elastic, and thermal) properties of solids in terms of basic physical laws. In one sense, Solid State Physics is more like chemistry than some other branches of physics because it focuses on common properties of large classes of materials. It is typical that Solid State Physics emphasizes how physics properties link to electronic structure. We have retained the term Solid State Physics, even though Condensed Matter Physics is more commonly used. Condensed Matter Physics includes liquids and non-crystalline solids such as glass, which we shall not discuss in detail. Modern Solid State Physics came of age in ...

Pyrometer model based on sensor physical structure and thermal operation

International Nuclear Information System (INIS)

Sebastian, Eduardo; Armiens, Carlos; Gomez-Elvira, Javier

2010-01-01

This paper proposes a new simplified thermal model for pyrometers, which takes into account both their internal and external physical structure and operation. The model is experimentally tested on the REMS GTS, an instrument for measuring ground temperature, which is part of the payload of the NASA MSL mission to Mars. The proposed model is based on an energy balance equation that represents the heat fluxes exchanged between sensor elements through radiation, conduction and convection. Despite being mathematically more complex than the more commonly used model, the proposed model makes it possible to design a methodology to compensate the effects of sensor spatial thermal gradients. The paper includes a practical methodology for identifying model constants, which is part of the GTS instrument calibration plan and uses a differential approach to avoid setup errors. Experimental results of the model identification methodology and a target temperature measurement performance after identification has been made are reported. Results demonstrate the good behaviour of the model, with errors below 0.15 deg. C in target temperature estimates.

Identification of physical models

DEFF Research Database (Denmark)

Melgaard, Henrik

1994-01-01

of the model with the available prior knowledge. The methods for identification of physical models have been applied in two different case studies. One case is the identification of thermal dynamics of building components. The work is related to a CEC research project called PASSYS (Passive Solar Components......The problem of identification of physical models is considered within the frame of stochastic differential equations. Methods for estimation of parameters of these continuous time models based on descrete time measurements are discussed. The important algorithms of a computer program for ML or MAP...... design of experiments, which is for instance the design of an input signal that are optimal according to a criterion based on the information provided by the experiment. Also model validation is discussed. An important verification of a physical model is to compare the physical characteristics...

Solid-State Physics Introduction to the Theory

CERN Document Server

Patterson, James

2010-01-01

Learning Solid State Physics involves a certain degree of maturity, since it involves tying together diverse concepts from many areas of physics. The objective is to understand, in a basic way, how solid materials behave. To do this one needs both a good physical and mathematical background. One definition of Solid State Physics is it is the study of the physical (e.g. the electrical, dielectric, magnetic, elastic, and thermal) properties of solids in terms of basic physical laws. In one sense, Solid State Physics is more like chemistry than some other branches of physics because it focuses on common properties of large classes of materials. It is typical that Solid State Physics emphasizes how physics properties link to electronic structure. We have retained the term Solid Modern solid state physics came of age in the late thirties and forties and is now is part of condensed matter physics which includes liquids, soft materials, and non-crystalline solids. This solid state/condensed matter physics book begin...

Time-lapse videos for physics education: specific examples

Science.gov (United States)

Vollmer, Michael; Möllmann, Klaus-Peter

2018-05-01

There are many physics experiments with long time scales such that they are usually neither shown in the physics class room nor in student labs. However, they can be easily recorded with time-lapse cameras and the respective time-lapse videos allow qualitative and/or quantitative analysis of the underlying physics. Here, we present some examples from thermal physics (melting, evaporation, cooling) as well as diffusion processes

Physics of Plutonium Recycling in Thermal Reactors

International Nuclear Information System (INIS)

Kinchin, G.H.

1967-01-01

A substantial programme of experimental reactor physics work with plutonium fuels has been carried out in the UK; the purpose of this paper is to review the experimental and theoretical work, with emphasis on plutonium recycling in thermal reactors. Although the main incentive for some of the work may have been to study plutonium build-up in uranium-fuelled reactors, it is nevertheless relevant to plutonium recycling and no distinction is drawn between build-up and enrichment studies. A variety of techniques have been for determining reactivity, neutron spectrum and reaction rates in simple assemblies of plutonium-aluminium fuel with water, graphite and beryllia moderators. These experiments give confidence in the basic data and methods of calculation for near-homogeneous mixtures of plutonium and moderator. In the practical case of plutonium recycling it is necessary to confirm that satisfactory predictions can be made for heterogeneous lattices enriched with plutonium. In this field, experiments have been carried out with plutonium-uranium metal and oxide-cluster fuels in graphite-moderated lattices and in SGHW lattices, and the effects of 240 Pu have been studied by perturbation measurements with single fuel elements. The exponential and critical experiments have used tonne quantities of fuel with plutonium contents ranging from 0.25 to 1.2% and the perturbation experiments have extended both the range of plutonium contents and the range of isotopic compositions of plutonium. In addition to reactivity and reactivity coefficients, such as the temperature coefficients, attention has been concentrated on relative reaction rate distributions which provide evidence for variations of neutron spectrum. .Theoretical comparisons, together with similar comparisons for non-uniform lattices, establish the validity of methods of calculation which have been used to study the feasibility of plutonium recycling in thermal reactors. (author)

Physics of Plutonium Recycling in Thermal Reactors

Energy Technology Data Exchange (ETDEWEB)

Kinchin, G. H. [Atomic Energy Establishment, Winfrith, Dorchester, Dorset (United Kingdom)

1967-09-15

A substantial programme of experimental reactor physics work with plutonium fuels has been carried out in the UK; the purpose of this paper is to review the experimental and theoretical work, with emphasis on plutonium recycling in thermal reactors. Although the main incentive for some of the work may have been to study plutonium build-up in uranium-fuelled reactors, it is nevertheless relevant to plutonium recycling and no distinction is drawn between build-up and enrichment studies. A variety of techniques have been for determining reactivity, neutron spectrum and reaction rates in simple assemblies of plutonium-aluminium fuel with water, graphite and beryllia moderators. These experiments give confidence in the basic data and methods of calculation for near-homogeneous mixtures of plutonium and moderator. In the practical case of plutonium recycling it is necessary to confirm that satisfactory predictions can be made for heterogeneous lattices enriched with plutonium. In this field, experiments have been carried out with plutonium-uranium metal and oxide-cluster fuels in graphite-moderated lattices and in SGHW lattices, and the effects of {sup 240}Pu have been studied by perturbation measurements with single fuel elements. The exponential and critical experiments have used tonne quantities of fuel with plutonium contents ranging from 0.25 to 1.2% and the perturbation experiments have extended both the range of plutonium contents and the range of isotopic compositions of plutonium. In addition to reactivity and reactivity coefficients, such as the temperature coefficients, attention has been concentrated on relative reaction rate distributions which provide evidence for variations of neutron spectrum. .Theoretical comparisons, together with similar comparisons for non-uniform lattices, establish the validity of methods of calculation which have been used to study the feasibility of plutonium recycling in thermal reactors. (author)

Student learning of upper-level thermal and statistical physics: The derivation and use of the Boltzmann factor

Science.gov (United States)

Thompson, John

2015-04-01

As the Physical Review Focused Collection demonstrates, recent frontiers in physics education research include systematic investigations at the upper division. As part of a collaborative project, we have examined student understanding of several topics in upper-division thermal and statistical physics. A fruitful context for research is the Boltzmann factor in statistical mechanics: the standard derivation involves several physically justified mathematical steps as well as the invocation of a Taylor series expansion. We have investigated student understanding of the physical significance of the Boltzmann factor as well as its utility in various circumstances, and identified various lines of student reasoning related to the use of the Boltzmann factor. Results from written data as well as teaching interviews suggest that many students do not use the Boltzmann factor when answering questions related to probability in applicable physical situations, even after lecture instruction. We designed an inquiry-based tutorial activity to guide students through a derivation of the Boltzmann factor and to encourage deep connections between the physical quantities involved and the mathematics. Observations of students working through the tutorial suggest that many students at this level can recognize and interpret Taylor series expansions, but they often lack fluency in creating and using Taylor series appropriately, despite previous exposure in both calculus and physics courses. Our findings also suggest that tutorial participation not only increases the prevalence of relevant invocation of the Boltzmann factor, but also helps students gain an appreciation of the physical implications and meaning of the mathematical formalism behind the formula. Supported in part by NSF Grants DUE-0817282, DUE-0837214, and DUE-1323426.

Proceedings of the eighth national conference on research in physics

International Nuclear Information System (INIS)

2005-01-01

This is a book of abstracts of the oral presentations that were presented during the eighth national conference on research in physics that was held from 20 to 23 deecember 2005 in Tunisia (Elkantaoui- Sousse). The following themes were covered : Nuclear and theoretical physics; Optical, molecular and atomic physics; Condensed matter physics; Soft matter physics; Mechanis; Thermal transfert; Electronics; physics engineering

Proceedings of the Ninth National Conference on Research in Physics

International Nuclear Information System (INIS)

2008-01-01

This is a book of abstracts of the oral presentations that were presented during the ninth national conference on research in physics that was held from 17 to 20 mars 2008 in Tunisia (Yasmine Hammamet). The following themes were covered : Nuclear and theoretical physics; optical, molecular and atomic physics; condensed matter physics; Soft matter physics; Mechanics; Thermal transfer; Electronics; physics engineering

University Students Explaining Adiabatic Compression of an Ideal Gas—A New Phenomenon in Introductory Thermal Physics

Science.gov (United States)

Leinonen, Risto; Asikainen, Mervi A.; Hirvonen, Pekka E.

2012-12-01

This study focuses on second-year university students' explanations and reasoning related to adiabatic compression of an ideal gas. The phenomenon was new to the students, but it was one which they should have been capable of explaining using their previous upper secondary school knowledge. The students' explanations and reasoning were investigated with the aid of paper and pencil tests ( n = 86) and semi-structured interviews ( n = 5) at the start of a thermal physics course at the University of Eastern Finland. The paper and pencil test revealed that the students had difficulties in applying content taught during earlier education in a new context: only a few of them were able to produce a correct explanation for the phenomenon. A majority of the students used either explanations with invalid but physically correct models, such as the ideal gas law or a microscopic model, or erroneous dependencies between quantities. The results also indicated that students had problems in seeing deficiencies or inconsistencies in their reasoning, in both test and interview situations. We suggest in our conclusion that the contents of upper secondary school thermal physics courses should be carefully examined to locate the best emphases for different laws, principles, concepts, and models. In particular, the limitations of models should be made explicit in teaching and students should be guided towards critical scientific thinking, including metaconceptual awareness.

Physical Acoustics in the Solid State

CERN Document Server

Lüthi, B

2006-01-01

Suitable for researchers and graduate students in physics and material science, "Physical Acoustics in the Solid State" reviews the modern aspects in the field, including many experimental results, especially those involving ultrasonics. Practically all fields of solid-state physics are covered: metals, semiconductors, magnetism, superconductivity, different kinds of phase transitions, low-dimensional systems, and the quantum Hall effect. After a review of the relevant experimental techniques and an introduction to the theory of elasticity, emphasizing the symmetry aspects, applications in the various fields of condensed matter physics are presented. Also treated are Brillouin-scattering results and results from thermodynamic investigations, such as thermal expansion and specific heat.

Physical Acoustics in the Solid State

CERN Document Server

Lüthi, Bruno

2007-01-01

Suitable for researchers and graduate students in physics and material science, "Physical Acoustics in the Solid State" reviews the modern aspects in the field, including many experimental results, especially those involving ultrasonics. Practically all fields of solid-state physics are covered: metals, semiconductors, magnetism, superconductivity, different kinds of phase transitions, low-dimensional systems, and the quantum Hall effect. After a review of the relevant experimental techniques and an introduction to the theory of elasticity, emphasizing the symmetry aspects, applications in the various fields of condensed matter physics are presented. Also treated are Brillouin-scattering results and results from thermodynamic investigations, such as thermal expansion and specific heat.

Physical mechanisms of thermal-diffusivity depth-profile generation in a hardened low-alloy Mn, Si, Cr, Mo steel reconstructed by photothermal radiometry

International Nuclear Information System (INIS)

Nicolaides, Lena; Mandelis, Andreas; Beingessner, Clare J.

2001-01-01

It is well established that in hardened steels thermal-diffusivity broadly anticorrelates with microhardness, allowing thermal-wave depth profilometry to be used as a tool to measure microhardness profiles. Nevertheless, the physical mechanisms for this anticorrelation have not been well understood. In this work, the thermal-diffusivity profiles of rough, hardened industrial steels were reconstructed after the elimination of roughness effects from the experimental data. Carburizing and quenching are widely used for the heat treatment of steel components, and it is important to understand their effects on thermal-diffusivity profiles. A thorough examination of the actual mechanism by which thermal-diffusivity depth profiles are affected by first carburizing and then quenching AISI-8620 steels was performed. It was concluded that the variation of thermal diffusivity with depth is dominated by the carbon concentration profile, whereas the absolute value of the thermal diffusivity is a function of microstructure. [copyright] 2001 American Institute of Physics

Physics of semiconductor lasers

CERN Document Server

Mroziewicz, B; Nakwaski, W

2013-01-01

Written for readers who have some background in solid state physics but do not necessarily possess any knowledge of semiconductor lasers, this book provides a comprehensive and concise account of fundamental semiconductor laser physics, technology and properties. The principles of operation of these lasers are therefore discussed in detail with the interrelations between their design and optical, electrical and thermal properties. The relative merits of a large number of laser structures and their parameters are described to acquaint the reader with the various aspects of the semiconductor l

Evaluation of thermal physical properties for fast reactor fuels. Melting point and thermal conductivities

International Nuclear Information System (INIS)

Kato, Masato; Morimoto, Kyoichi; Komeno, Akira; Nakamichi, Shinya; Kashimura, Motoaki; Abe, Tomoyuki; Uno, Hiroki; Ogasawara, Masahiro; Tamura, Tetsuya; Sugata, Hirotada; Sunaoshi, Takeo; Shibata, Kazuya

2006-10-01

Japan Atomic Energy Agency has developed a fast breeder reactor (FBR), and plutonium and uranium mixed oxide (MOX) having low density and 20-30%Pu content has used as a fuel of the FBR, Monju. In plutonium, Americium has been accumulated during long-term storage, and Am content will be increasing up to 2-3% in the MOX. It is essential to evaluate the influence of Am content on physical properties of MOX on the development of FBR in the future. In this study melting points and thermal conductivities which are important data on the fuel design were measured systematically in wide range of composition, and the effects of Am accumulated were evaluated. The solidus temperatures of MOX were measured as a function of Pu content, oxygen to metal ratio (O/M) and Am content using thermal arrest technique. The sample was sealed in a tungsten capsule in vacuum for measuring solidus temperature. In the measurements of MOX with Pu content of more than 30%, a rhenium inner capsule was used to prevent the reaction between MOX and tungsten. In the results, it was confirmed that the melting points of MOX decrease with as an increase of Pu content and increase slightly with a decrease of O/M ratio. The effect of Am content on the fuel design was negligible small in the range of Am content up to 3%. Thermal conductivities of MOX were evaluated from thermal diffusivity measured by laser flash method and heat capacity calculated by Neumann- Kopp's law. The thermal conductivity of MOX decreased slightly in the temperature of less than 1173K with increasing Am content. The effect of Am accumulated in long-term storage fuel was evaluated from melting points and thermal conductivities measured in this study. It is concluded that the increase of Am in the fuel barely affect the fuel design in the range of less than 3%Am content. (author)

Reactor physics for non-nuclear engineers

International Nuclear Information System (INIS)

Lewis, E.E.

2011-01-01

A one-term undergraduate course in reactor physics is described. The instructional format is strongly influenced by its intended audience of non-nuclear engineering students. In contrast to legacy treatments of the subject, the course focuses on the physics of nuclear power reactors with no attempt to include instruction in numerical methods. The multi-physics of power reactors is emphasized highlighting the close interactions between neutronic and thermal phenomena in design and analysis. Consequently, the material's sequencing also differs from traditional treatments, for example treating kinetics before the neutron diffusion is introduced. (author)

The Physics of Energy

Science.gov (United States)

Jaffe, Robert L.; Taylor, Washington

2018-01-01

Part I. Basic Energy Physics and Uses: 1. Introduction; 2. Mechanical energy; 3. Electromagnetic energy; 4. Waves and light; 5. Thermodynamics I: heat and thermal energy; 6. Heat transfer; 7. Introduction to quantum physics; 8. Thermodynamics II: entropy and temperature; 9. Energy in matter; 10. Thermal energy conversion; 11. Internal combustion engines; 12. Phase-change energy conversion; 13. Thermal power and heat extraction cycles; Part II. Energy Sources: 14. The forces of nature; 15. Quantum phenomena in energy systems; 16. An overview of nuclear power; 17. Structure, properties and decays of nuclei; 18. Nuclear energy processes: fission and fusion; 19. Nuclear fission reactors and nuclear fusion experiments; 20. Ionizing radiation; 21. Energy in the universe; 22. Solar energy: solar production and radiation; 23. Solar energy: solar radiation on Earth; 24. Solar thermal energy; 25. Photovoltaic solar cells; 26. Biological energy; 27. Ocean energy flow; 28. Wind: a highly variable resource; 29. Fluids – the basics; 30. Wind turbines; 31. Energy from moving water: hydro, wave, tidal, and marine current power; 32. Geothermal energy; 33. Fossil fuels; Part III. Energy System Issues and Externalities: 34. Energy and climate; 35. Earth's climate: past, present, and future; 36. Energy efficiency, conservation, and changing energy sources; 37. Energy storage; 38. Electricity generation and transmission.

Physical and thermal behavior of cement composites reinforced with recycled waste paper fibers

Science.gov (United States)

Hospodarova, Viola; Stevulova, Nadezda; Vaclavik, Vojtech; Dvorsky, Tomas

2017-07-01

In this study, three types of recycled waste paper fibers were used to manufacture cement composites reinforced with recycled cellulosic fibers. Waste cellulosic fibers in quantity of 0.2, 0.3, and 0.5 wt.% were added to cement mixtures. Physical properties such as density, water capillarity, water absorbability and thermal conductivity of fiber cement composites were studied after 28 days of hardening. However, durability of composites was tested after their water storage up to 90 days. Final results of tested properties of fiber cement composites were compared with cement reference sample without cellulosic fibers.

The Electronic Library of the Thermal Physical Databases

International Nuclear Information System (INIS)

Zhuravleva, Y.; Mingaleeva, G.; Mokrousov, K.; Yashnikov, D.

2008-01-01

Up-to-date quality assurance procedure requires the permanent verification of the best-estimate thermal-hydraulic system codes and the uncertainty analysis of results. Therefore, the researches need the growing up amount of the experimental data. Over the last years RDIPE has been carried out the verification of RELAP5/mod3.2 code and safety analysis for NPP with RBMK reactor. Moreover, these activities include both Russian (Puchok, Korsar, RATEG) and foreign codes (RELAP, MELCOR, ATHLET). Such activities require of the accumulation and the assessment of the large amount of experimental data. Electronic data base library was created in order to unify and keep the large amount of the primary experimental data. The special attention was given to completeness and sufficiency of information for modelling of the experiments. Generally this activity was carried out in the collaboration with the authors of experiment. First of all the experimental data for the additional verification of Russian and foreign codes relating to RBMK reactor safety analysis were included in the library. The following phenomena are specific and important: outflow from the main circulation circuit including critical flow of water, two phases mixture and vapour through the break, flow limiters, long channels with/ without local resistance and other circuit elements; thermal hydraulic process in reactor channels: pressure-drop, relative movement of phases, countercurrent flow, reflooding; heat transfer in fuel bundles including radiation heat transfer; heat transfer before and after critical heat flux transition in the rod bundle; variation of steam-water level in drum separator. These phenomena were studied at the test sites of KPI (Ukraine), Lithuanian Energy Institute, RDIPE (Russia), Russian Research Center 'Kurchatov Institute', EREC (Russia) and others. Transient modes data from operating power plants became the important part of the library. The authors of the electronic thermal physical

Physics of high-temperature reactors

International Nuclear Information System (INIS)

Massimo, L.

1976-01-01

The subject is covered in chapters entitled: general description of the HTR core; general considerations about reactor physics; neutron cross-sections; basic aspects of transport and diffusion theory; methods for the solution of the diffusion equation; slowing-down and thermalization in graphite; resonance absorption; spectrum calculations and cross-section averaging; burn-up; core design; fuel management and cost calculations; temperature coefficient; core dynamics and accident analysis; reactor control; peculiarities of HTR physics; analysis of calculational accuracy; sequence of reactor design calculations. (U.K.)

Advances in Reactor Physics, Mathematics and Computation. Volume 1

Energy Technology Data Exchange (ETDEWEB)

1987-01-01

These proceedings of the international topical meeting on advances in reactor physics, mathematics and computation, volume one, are divided into 6 sessions bearing on: - session 1: Advances in computational methods including utilization of parallel processing and vectorization (7 conferences) - session 2: Fast, epithermal, reactor physics, calculation, versus measurements (9 conferences) - session 3: New fast and thermal reactor designs (9 conferences) - session 4: Thermal radiation and charged particles transport (7 conferences) - session 5: Super computers (7 conferences) - session 6: Thermal reactor design, validation and operating experience (8 conferences).

The physical nature and manufacture of activated carbon

Energy Technology Data Exchange (ETDEWEB)

McDougall, G.J. (NCP, Bedfordview (South Africa))

1991-04-01

After defining activated carbon, the author describes its structure and outlines the physical characteristics distinguishing one type of activated carbon from another. The adsorptive properties of these carbons, the raw materials used, and the manufacturing processes - chemical activation, and physical or thermal activation - are eoutlined. The high-temperature thermal route (which is the most important for the products employed in gold recovery) using coconut shells or coals as the raw material is then discussed in some detail. 20 refs., 11 figs., 2 tabs.

Effect of water phase transition on dynamic ruptures with thermal pressurization: Numerical simulations with changes in physical properties of water

Science.gov (United States)

Urata, Yumi; Kuge, Keiko; Kase, Yuko

2015-02-01

Phase transitions of pore water have never been considered in dynamic rupture simulations with thermal pressurization (TP), although they may control TP. From numerical simulations of dynamic rupture propagation including TP, in the absence of any water phase transition process, we predict that frictional heating and TP are likely to change liquid pore water into supercritical water for a strike-slip fault under depth-dependent stress. This phase transition causes changes of a few orders of magnitude in viscosity, compressibility, and thermal expansion among physical properties of water, thus affecting the diffusion of pore pressure. Accordingly, we perform numerical simulations of dynamic ruptures with TP, considering physical properties that vary with the pressure and temperature of pore water on a fault. To observe the effects of the phase transition, we assume uniform initial stress and no fault-normal variations in fluid density and viscosity. The results suggest that the varying physical properties decrease the total slip in cases with high stress at depth and small shear zone thickness. When fault-normal variations in fluid density and viscosity are included in the diffusion equation, they activate TP much earlier than the phase transition. As a consequence, the total slip becomes greater than that in the case with constant physical properties, eradicating the phase transition effect. Varying physical properties do not affect the rupture velocity, irrespective of the fault-normal variations. Thus, the phase transition of pore water has little effect on dynamic ruptures. Fault-normal variations in fluid density and viscosity may play a more significant role.

Improved tests of extra-dimensional physics and thermal quantum field theory from new Casimir force measurements

International Nuclear Information System (INIS)

Decca, R.S.; Fischbach, E.; Klimchitskaya, G.L.; Mostepanenko, V.M.; Krause, D.E.; Lopez, D.

2003-01-01

We report new constraints on extra-dimensional models and other physics beyond the standard model based on measurements of the Casimir force between two dissimilar metals for separations in the range 0.2-1.2 μm. The Casimir force between a Au-coated sphere and a Cu-coated plate of a microelectromechanical torsional oscillator was measured statically with an absolute error of 0.3 pN. In addition, the Casimir pressure between two parallel plates was determined dynamically with an absolute error of ≅0.6 mPa. Within the limits of experimental and theoretical errors, the results are in agreement with a theory that takes into account the finite conductivity and roughness of the two metals. The level of agreement between experiment and theory was then used to set limits on the predictions of extra-dimensional physics and thermal quantum field theory. It is shown that two theoretical approaches to the thermal Casimir force which predict effects linear in temperature are ruled out by these experiments. Finally, constraints on Yukawa corrections to Newton's law of gravity are strengthened by more than an order of magnitude in the range 56-330 nm

PHYSICS

CERN Multimedia

P. Sphicas

There have been three physics meetings since the last CMS week: “physics days” on March 27-29, the Physics/ Trigger week on April 23-27 and the most recent physics days on May 22-24. The main purpose of the March physics days was to finalize the list of “2007 analyses”, i.e. the few topics that the physics groups will concentrate on for the rest of this calendar year. The idea is to carry out a full physics exercise, with CMSSW, for select physics channels which test key features of the physics objects, or represent potential “day 1” physics topics that need to be addressed in advance. The list of these analyses was indeed completed and presented in the plenary meetings. As always, a significant amount of time was also spent in reviewing the status of the physics objects (reconstruction) as well as their usage in the High-Level Trigger (HLT). The major event of the past three months was the first “Physics/Trigger week” in Apri...

A course in theoretical physics

CERN Document Server

Shepherd, P J

2013-01-01

This book is a comprehensive account of five extended modules covering the key branches of twentieth-century theoretical physics, taught by the author over a period of three decades to students on bachelor and master university degree courses in both physics and theoretical physics. The modules cover nonrelativistic quantum mechanics, thermal and statistical physics, many-body theory, classical field theory (including special relativity and electromagnetism), and, finally, relativistic quantum mechanics and gauge theories of quark and lepton interactions, all presented in a single, self-contained volume. In a number of universities, much of the material covered (for example, on Einstein’s general theory of relativity, on the BCS theory of superconductivity, and on the Standard Model, including the theory underlying the prediction of the Higgs boson) is taught in postgraduate courses to beginning PhD students. A distinctive feature of the book is that full, step-by-step mathematical proofs of all essentia...

Solar Thermal Energy Exploitation: An Opportunity to Enhance Conceptual Learning in Physics

Science.gov (United States)

Rodrigues, M. A.; Cravino, J. P.; Liberato, M. L. R.

2010-05-01

In a society mainly driven by Science and Technology it is becoming consensual the idea that scientific education should include three components: Education in Science, Education about Science and Education through Science. Some authors suggest that, in education, everyday objects should be used to illustrate scientific issues (e.g. Andrée, 2005). Thus the goal of this study is two-fold: first, to develop a teaching and learning strategy, in the framework of Education for Sustainable Development (ESD), concerning the renewable energy issue, while showing the importance of using everyday situations in the improvement of students' motivation in Physics learning. Energy is the core concept in this study. Energy conservation includes the concepts applied to sustainable balance between environment and the energy availability and use. Dias et al. (2004) stress that education is one of the best ways to transform the human behavior for the rational use of energy, which represents a long-term investment. In this work students become aware and recognize the importance and value of energy in everyday life, they identify energy transfer and transformation processes, confirm energy availability, relating these topics to present human needs and climate change issues. A didactic model of a solar thermal panel has thus been built, using cheap, common materials, by 15-16 year-old Physics students, from a Portuguese secondary school. Students had to plan the experiments, in small groups, to identify and estimate physical magnitudes and to explore how to maximize the solar thermal panel efficiency. The experimental activities took place in the school's playground, in a place where there were no obstacles to capturing solar radiation. Finally, students had to deal with experimental data acquisition and analysis, they had to prepare a report, as well as to answer a survey, to evaluate their learning success. Results show that students appreciated the proposed themes and activities

Classical and Quantum Thermal Physics

Science.gov (United States)

Prasad, R.

2016-11-01

List of figures; List of tables; Preface; Acknowledgement; Dedication; 1. The kinetic theory of gases; 2. Ideal to real gas, viscosity, conductivity and diffusion; 3. Thermodynamics: definitions and Zeroth law; 4. First Law of Thermodynamics and some of its applications; 5. Second Law of Thermodynamics and some of its applications; 6. TdS equations and their applications; 7. Thermodynamic functions, potentials, Maxwell equations, the Third Law and equilibrium; 8. Some applications of thermodynamics to problems of physics and engineering; 9. Application of thermodynamics to chemical reactions; 10. Quantum thermodynamics; 11. Some applications of quantum thermodynamics; 12. Introduction to the thermodynamics of irreversible processes; Index.

Physics parameter calculations for a Tandem Mirror Reactor with thermal barriers

International Nuclear Information System (INIS)

Boghosian, B.M.; Lappa, D.A.; Logan, B.G.

1979-01-01

Thermal barriers are localized reductions in potential between the plugs and the central cell, which effectively insulate trapped plug electrons from the central cell electrons. By then applying electron heating in the plug, it is possible to obtain trapped electron temperatures that are much greater than those of the central cell electrons. This, in turn, effects an increase in the plug potential and central cell confinement with a concomitant decrease in plug density and injection power. Ions trapped in the barrier by collisions are removed by the injection of neutral beams directed inside the barrier cell loss cone; these beam neutrals convert trapped barrier ions to neutrals by charge exchange permitting their escape. We describe a zero-dimensional physics model for this type of reactor, and present some preliminary results for Q

Feedback effect of human physical and psychological adaption on time period of thermal adaption in naturally ventilated building

DEFF Research Database (Denmark)

liu, weiwei; Huangfu, Hao; Xiong, Jing

2014-01-01

This study proposed a method to determine time period of thermal adaption for occupants in naturally ventilated building, and analyzed the synergistic and separate feedback effect of the physical and psychological adaption modes on the time period of thermal adaption. Using the method, the values...... of the time period of thermal adaption were obtained on the basis of the data from a long-term field survey conducted in two typical naturally ventilated offices located in Changsha, China. The results showed that the occupants need to take 4.25 days to fully adapt to a step-change in outdoor air temperature...

Physics in Brazil in the next decade: atomic, molecular and optical physics, biological, chemical and medical physics, physics teaching and plasma physics

International Nuclear Information System (INIS)

1990-01-01

This is an overview of physics in Brazil in the next decade. It is specially concerned with atomic, molecular and optical physics, biological chemical and medical physics, and also teaching of physics and plasma physics. It presents the main research groups in Brazil in the above mentioned areas. It talks as well, about financing new projects and the costs involved to improve these areas. (A.C.A.S.)

Physical Vapor Deposition of Thin Films

Science.gov (United States)

Mahan, John E.

2000-01-01

A unified treatment of the theories, data, and technologies underlying physical vapor deposition methods With electronic, optical, and magnetic coating technologies increasingly dominating manufacturing in the high-tech industries, there is a growing need for expertise in physical vapor deposition of thin films. This important new work provides researchers and engineers in this field with the information they need to tackle thin film processes in the real world. Presenting a cohesive, thoroughly developed treatment of both fundamental and applied topics, Physical Vapor Deposition of Thin Films incorporates many critical results from across the literature as it imparts a working knowledge of a variety of present-day techniques. Numerous worked examples, extensive references, and more than 100 illustrations and photographs accompany coverage of: * Thermal evaporation, sputtering, and pulsed laser deposition techniques * Key theories and phenomena, including the kinetic theory of gases, adsorption and condensation, high-vacuum pumping dynamics, and sputtering discharges * Trends in sputter yield data and a new simplified collisional model of sputter yield for pure element targets * Quantitative models for film deposition rate, thickness profiles, and thermalization of the sputtered beam

Spring meeting of the scientific associations for atomic physics, high speed physics, mass spectrometry, molecular physics, plasma physics

International Nuclear Information System (INIS)

1996-01-01

The volume contains the abstracts of the contributions to the Spring Meeting in Rostock with aspects of atomic physics, molecular physics, high speed physics, plasma physics and mass spectrometry. (MM)

Introduction to the physics of electron emission

CERN Document Server

Jensen, Kevin L

2018-01-01

Electron emission is both a fundamental phenomenon and an enabling component that lies at the very heart of modern science and technology. Written by a recognized authority in the field, with expertise in both electron emission physics and electron beam physics, An Introduction to Electron Emission provides an in-depth look at the physics behind thermal, field, photo, and secondary electron emission mechanisms, how that physics affects the beams that result through space charge and emittance growth, and explores the physics behind their utilization in an array of applications. The book addresses mathematical and numerical methods underlying electron emission, describing where the equations originated, how they are related, and how they may be correctly used to model actual sources for devices using electron beams. Writing for the beam physics and solid state communities, the author explores applications of electron emission methodology to solid state, statistical, and quantum mechanical ideas and concepts r...

Physics of solids

CERN Document Server

Ketterson, John B

2016-01-01

This comprehensive text covers the basic physics of the solid state starting at an elementary level suitable for undergraduates but then advancing, in stages, to a graduate and advanced graduate level. In addition to treating the fundamental elastic, electrical, thermal, magnetic, structural, electronic, transport, optical, mechanical and compositional properties, we also discuss topics like superfluidity and superconductivity along with special topics such as strongly correlated systems, high-temperature superconductors, the quantum Hall effects, and graphene. Particular emphasis is given to so-called first principles calculations utilizing modern density functional theory which for many systems now allow accurate calculations of the electronic, magnetic, and thermal properties.

Recent BWR fuel management reactor physics advances

International Nuclear Information System (INIS)

Crowther, R.L.; Congdon, S.P.; Crawford, B.W.; Kang, C.M.; Martin, C.L.; Reese, A.P.; Savoia, P.J.; Specker, S.R.; Welchly, R.

1982-01-01

Improvements in BWR fuel management have been under development to reduce uranium and separative work (SWU) requirements and reduce fuel cycle costs, while also maintaining maximal capacity factors and high fuel reliability. Improved reactor physics methods are playing an increasingly important role in making such advances feasible. The improved design, process computer and analysis methods both increase knowledge of the thermal margins which are available to implement fuel management advance, and improve the capability to reliably and efficiently analyze and design for fuel management advances. Gamma scan measurements of the power distributions of advanced fuel assembly and advanced reactor core designs, and improved in-core instruments also are important contributors to improving 3-d predictive methods and to increasing thermal margins. This paper is an overview of the recent advances in BWR reactor physics fuel management methods, coupled with fuel management and core design advances. The reactor physics measurements which are required to confirm the predictions of performance fo fuel management advances also are summarized

A comparison of physical self-concept between physical education and non-physical education university students

Directory of Open Access Journals (Sweden)

Hamid ARAZI

2013-06-01

Full Text Available The purpose of this study was to compare physical self-concept between physical education and non-physical education university students. The target population of this study was all male and female physical education and non-physical education university students in Rasht city of Iran. After translating the Physical Self-Description Questionnaire (PSDQ and adjusting some of the questions, the questionnaire was evaluated by the specialists in the context of validity and the reliability achieved by test-retest (Cronbach Alpha value of 0.84. We then, according to the Odineski table selected 180 physical education and non-physical education males and 190 physical education and non-physical education females opportunistically. The collected data was analyzed by 2×2 MANOVA for determine differences between genders and major. The results showed mean vector scores of physical education in the following scales: physical activity; global physical; competence; sports; strength; endurance and flexibility were significantly (p<0.05 higher than that of non-physical education major students. Also, the results shows that mean vector scores of male in the following scales: health; coordination; physical activity; body fat; global physical; competence; sports; global physical self-concept and global esteem were significantly (p<0.05 higher than female. Based on the result of our study the physical self-concept non-physical education and female is lower, than that physical education and male. The results may reflect that male and physical major education students, who usually spend more time on physical activity and sport training to have better fitness and skill oriented self concept than their counterparts.

Effect of epoxidised soybean oil loading as plasticiser on physical, mechanical and thermal properties of polyvinylchloride

Science.gov (United States)

Rahmah, M.; Nurazzi, N. Mohd; Farah Nordyana, A. R.; Syed Anas, S. M.

2017-07-01

The aim of this paper is to study the effect of epoxidised soybean oil (ESO) as an alternative plasticizer on physical, mechanical and thermal properties of plasticised polyvinyl chloride (PPVC). Samples were prepared using 10, 20, 30 and 40% by weight percent of ESO. The samples were characterized for density, water absorption, tensile, hardness and thermal properties. The addition of ESO as plasticizer in PVC had caused significant effect on the physical and mechanical properties of PPVC. Increasing of ESO loading had resulted in decreased density, tensile strength, tensile modulus but increased in elongation at break and shore hardness. From water absorption study, it was observed that the all the samples reached the plateau absorption at days 8 to 10 with absorption percentages of between 1.8 to 2%. In general the crystallinity of PPVC maintained between 10 to 13% with increase in ESO loading while the melting point ( Tm) is slightly decreased about 3 to 6°C. In this study, ESO which acts as plasticiser were found to result in lower glass transition temperature (Tg). The enhancements of super cooling with higher ESO loading were found to increase the crystallization temperature, promoting crystallisation and act as nucleating agent.

VOA: a 2-d plasma physics code

International Nuclear Information System (INIS)

Eltgroth, P.G.

1975-12-01

A 2-dimensional relativistic plasma physics code was written and tested. The non-thermal components of the particle distribution functions are represented by expansion into moments in momentum space. These moments are computed directly from numerical equations. Currently three species are included - electrons, ions and ''beam electrons''. The computer code runs on either the 7600 or STAR machines at LLL. Both the physics and the operation of the code are discussed

Nanodiamond particles/PVDF nanocomposite flexible films: thermal, mechanical and physical properties

Science.gov (United States)

Jaleh, Babak; Sodagar, Shima; Momeni, Amir; Jabbari, Ameneh

2016-08-01

Recently, polymer nanocomposites reinforced with nanoparticles have attracted a lot of attention due to their unique physical and mechanical properties. In this work, poly (vinylidene fluoride)/nanodiamond particles nanocomposite films were prepared by solution casting method with various nanodiamond particles contents. The samples were investigated by Fourier transform infrared spectroscopy and x-ray diffraction technique. The results revealed an obvious α to β-phase transformation compared to pure PVDF. The most (or the maximum) phase transformation from α to β-phase (>90%) was found for nanocomposite film with 8% wt nanodiamond particles. Scanning electron micrographs showed considerable decrease in the size of spherulitic crystal structure of PVDF with adding nanoparticles. The photoluminescence property of nanocomposite films was investigated by photoluminescence spectroscopy and the optical band gap value was calculated from the UV-visible absorption spectra. The results showed that after the incorporation of nanoparticles into PVDF, the value of optical band gap decreased. Thermal stability of samples was studied by thermogravimetric analysis. Due to an increase in the electroactive phase (β) percentage by adding nanoparticles, the resistance of samples to thermal degradation improved. The mechanical properties of samples were investigated by tensile test and hardness measurements. The elastic modulus and hardness of samples were enhanced by adding nanodiamond particles and elongation to fracture decreased.

PHYSICS

CERN Multimedia

J. Incandela

There have been numerous developments in the physics area since the September CMS week. The biggest single event was the Physics/Trigger week in the end of Octo¬ber, whereas in terms of ongoing activities the “2007 analyses” went into high gear. This was in parallel with participation in CSA07 by the physics groups. On the or¬ganizational side, the new conveners of the physics groups have been selected, and a new database for man¬aging physics analyses has been deployed. Physics/Trigger week The second Physics-Trigger week of 2007 took place during the week of October 22-26. The first half of the week was dedicated to working group meetings. The ple¬nary Joint Physics-Trigger meeting took place on Wednesday afternoon and focused on the activities of the new Trigger Studies Group (TSG) and trigger monitoring. Both the Physics and Trigger organizations are now focused on readiness for early data-taking. Thus, early trigger tables and preparations for calibr...

PHYSICS

CERN Multimedia

P. Sphicas

The CPT project came to an end in December 2006 and its original scope is now shared among three new areas, namely Computing, Offline and Physics. In the physics area the basic change with respect to the previous system (where the PRS groups were charged with detector and physics object reconstruction and physics analysis) was the split of the detector PRS groups (the old ECAL-egamma, HCAL-jetMET, Tracker-btau and Muons) into two groups each: a Detector Performance Group (DPG) and a Physics Object Group. The DPGs are now led by the Commissioning and Run Coordinator deputy (Darin Acosta) and will appear in the correspond¬ing column in CMS bulletins. On the physics side, the physics object groups are charged with the reconstruction of physics objects, the tuning of the simulation (in collaboration with the DPGs) to reproduce the data, the provision of code for the High-Level Trigger, the optimization of the algorithms involved for the different physics analyses (in collaboration with the analysis gr...

New trends in reactor physics design methods

International Nuclear Information System (INIS)

Jagannathan, V.

1993-01-01

Reactor physics design methods are aimed at safe and efficient management of nuclear materials in a reactor core. The design methodologies require a high level of integration of different calculational modules of many a key areas like neutronics, thermal hydraulics, radiation transport etc in order to follow different 3-D phenomena under normal and transient operating conditions. The evolution of computer hardware technology is far more rapid than the software development and has rendered such integration a meaningful and realizable proposition. The aim of this paper is to assess the state of art of the physics design codes used in Indian thermal power reactor applications with respect to meeting the design, operational and safety requirements. (author). 50 refs

Physics basis for MFTF-B

International Nuclear Information System (INIS)

Baldwin, D.E.; Logan, B.G.; Simonen, T.C.

1980-01-01

The physics overview covers the following topics: (1) classical energetics, (2) single-particle adiabaticity and drift effects, (3) equilibrium considerations, (4) low-frequency stability, (5) microstability of plugs and barriers, and (6) electron axial thermal conduction. Operation scenarios and summaries of initial TMX results are also described

Physical Analysis of an Electric Resistor Heating

Science.gov (United States)

Perea Martins, J. E. M.

2018-01-01

This work describes a simple experiment to measure the resistor temperature as a function of the applied power and proves that it is an efficient way to introduce some important physical concepts in classroom, including the Joule's first law, hot-spot temperature, thermal resistance, thermal dissipation constant, time constant and the Newton's law…

Theoretical physics 8 statistical physics

CERN Document Server

Nolting, Wolfgang

2018-01-01

This textbook offers a clear and comprehensive introduction to statistical physics, one of the core components of advanced undergraduate physics courses. It follows on naturally from the previous volumes in this series, using methods of probability theory and statistics to solve physical problems. The first part of the book gives a detailed overview on classical statistical physics and introduces all mathematical tools needed. The second part of the book covers topics related to quantized states, gives a thorough introduction to quantum statistics, followed by a concise treatment of quantum gases. Ideally suited to undergraduate students with some grounding in quantum mechanics, the book is enhanced throughout with learning features such as boxed inserts and chapter summaries, with key mathematical derivations highlighted to aid understanding. The text is supported by numerous worked examples and end of chapter problem sets. About the Theoretical Physics series Translated from the renowned and highly successf...

Effect of cooking time on the physical, chemical and thermal properties of acha seeds

Directory of Open Access Journals (Sweden)

Akeem O. Raji

2017-10-01

Full Text Available Acha is a less utilized cereal grain in Africa. Scaling up of the processing technology of acha seeds is desirable if accurate information on effect of processing on its properties is available. This study investigated the effect of cooking duration on the chemical and physical properties of acha seeds. Cooking times (2.5, 5, 7.5 and 10 minutes at 100oC were used. The volume, length, breadth, thickness, porosity, density, sphericity, aspect ratio, specific heat capacity, thermal conductivity, thermal diffusivity, moisture, protein, fat, ash, crude fibre and carbohydrate were determined using standard methods. Data were analysed using ANOVA at p = 0.05. The results obtained revealed that varietal difference had a significant effect on volume, length, breadth, thickness, true density, bulk density, porosity, sphericity and aspect ratio. The moisture content, ash, protein, crude fibre, fat, carbohydrate, specific heat capacity, thermal conductivity and thermal diffusivity varied from 8.80 - 56.17 %, 0.32 - 1.87%, 1.92 - 11.50%, 0.29 - 1.58%, 0.32 - 2.81%, 40.94 - 76.26%, 1.66 -2.97 kJkg-1K-1, 0.26 -0.43 Wm-1K-1 and 0.85 x 10-7 - 1.17 x 10-7 ms-2 respectively, as significantly influenced by cooking time. Cooking for 7.5 minutes was appropriate using the moisture uptakes and thermal properties as criteria. 

Progress report on reactor physics research program, January 1963 - February 1964

Energy Technology Data Exchange (ETDEWEB)

NONE

1964-02-15

This progress report is a part of the annual report of the department of reactor physics prepared for the Boris Kidric Institute of nuclear sciences. It is a review of research activities in the field of theoretical and experimental reactor physics in the year 1973. A part of this program was included in the NPY Cooperative program in reactor physics. The topics covered by this report are as follows: Calculations of the thermal neutron distribution and reaction rate in a reactor cell and comparison with experiments; buckling measurements; thermalization and slowing down of neutrons; pulsed neutron source techniques; and reactor kinetics.

Progress report on reactor physics research program, January 1963 - February 1964

International Nuclear Information System (INIS)

1964-02-01

This progress report is a part of the annual report of the department of reactor physics prepared for the Boris Kidric Institute of nuclear sciences. It is a review of research activities in the field of theoretical and experimental reactor physics in the year 1973. A part of this program was included in the NPY Cooperative program in reactor physics. The topics covered by this report are as follows: Calculations of the thermal neutron distribution and reaction rate in a reactor cell and comparison with experiments; buckling measurements; thermalization and slowing down of neutrons; pulsed neutron source techniques; and reactor kinetics

Influence of Physical Activity on Students' Physical Self-Concept and Satisfaction with Life: Physical and Non-Physical Education Students' Perspective

OpenAIRE

MEHDINEZHAD, Vali; GOLSANAMLOU, Masoumeh

2014-01-01

The purpose of this study was to find out the physical and non-physical education students' physical self-concept and satisfaction with life. 470 students were selected randomly as two sample groups (physical and non-physical education students). The valid sample of study was 449. The two questionnaires employed here were the Physical Self-Description Questionnaire (PSDQ-S) and the Satisfaction with Life Scale. SPSS 20 was used to produce the Mean; Standard Deviations; Pearson's Pro...

Thermal analysis of physical and chemical changes occuring during regeneration of activated carbon

Directory of Open Access Journals (Sweden)

Radić Dejan B.

2017-01-01

Full Text Available High-temperature thermal process is a commercial way of regeneration of spent granular activated carbon. The paper presents results of thermal analysis conducted in order to examine high-temperature regeneration of spent activated carbon, produced from coconut shells, previously used in drinking water treatment. Results of performed thermogravimetric analysis, derivative thermogravimetric analysis, and differential thermal analysis, enabled a number of hypotheses to be made about different phases of activated carbon regeneration, values of characteristic parameters during particular process phases, as well as catalytic impact of inorganic materials on development of regeneration process. Samples of activated carbon were heated up to 1000°C in thermogravimetric analyser while maintaining adequate oxidizing or reducing conditions. Based on diagrams of thermal analysis for samples of spent activated carbon, temperature intervals of the first intense mass change phase (180-215°C, maximum of exothermic processes (400-450°C, beginning of the second intense mass change phase (635-700°C, and maximum endothermic processes (800-815°C were deter-mined. Analysing and comparing the diagrams of thermal analysis for new, previously regenerated and spent activated carbon, hypothesis about physical and chemical transformations of organic and inorganic adsorbate in spent activated carbon are given. Transformation of an organic adsorbate in the pores of activated carbon, results in loss of mass and an exothermic reaction with oxygen in the vapour phase. The reactions of inorganic adsorbate also result the loss of mass of activated carbon during its heating and endothermic reactions of their degradation at high temperatures.

Selected physical properties of various diesel blends

Science.gov (United States)

Hlaváčová, Zuzana; Božiková, Monika; Hlaváč, Peter; Regrut, Tomáš; Ardonová, Veronika

2018-01-01

The quality determination of biofuels requires identifying the chemical and physical parameters. The key physical parameters are rheological, thermal and electrical properties. In our study, we investigated samples of diesel blends with rape-seed methyl esters content in the range from 3 to 100%. In these, we measured basic thermophysical properties, including thermal conductivity and thermal diffusivity, using two different transient methods - the hot-wire method and the dynamic plane source. Every thermophysical parameter was measured 100 times using both methods for all samples. Dynamic viscosity was measured during the heating process under the temperature range 20-80°C. A digital rotational viscometer (Brookfield DV 2T) was used for dynamic viscosity detection. Electrical conductivity was measured using digital conductivity meter (Model 1152) in a temperature range from -5 to 30°C. The highest values of thermal parameters were reached in the diesel sample with the highest biofuel content. The dynamic viscosity of samples increased with higher concentration of bio-component rapeseed methyl esters. The electrical conductivity of blends also increased with rapeseed methyl esters content.

Physical vapor deposited films of a perylene derivative: supramolecular arrangement and thermal stability

Energy Technology Data Exchange (ETDEWEB)

Fernandes, Jose Diego; Alessio, Priscila; Silva, Matheus Rodrigues Medeiros; Aroca, Ricardo Flavio; Souza, Agda Eunice de; Constantino, Carlos Jose Leopoldo, E-mail: case@fct.unesp.br [Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), Presidente Prudente, SP (Brazil). Dept. de Fisica

2017-07-15

The analysis of supramolecular arrangement is essential to understand the role of this key factor on the optical and electrical properties of organic thin films. In this work, thin solid films of bis(phenethylimido) perylene (PhPTCD) fabricated using physical vapor deposition (PVD) technique (thermal evaporation), deposited simultaneously onto different substrates (Ag mirror, Ge, and quartz plates) contingent on the characterization technique. The main objective is to study the PhPTCD supramolecular arrangement and the thermal stability of this arrangement in PVD films. The ultraviolet-visible absorption reveals a controlled growth of the PVD films, and the micro-Raman scattering data show that the PhPTCD molecule is not thermally degraded in the conditions of these experiments. The microscopy also shows a homogeneous morphological surface of the PVD film at macro and micro scales, with molecular aggregates at nanoscale. Besides, the PVD film roughness does not follow substrate roughness. The X-ray diffraction indicates a crystalline structure for PhPTCD powder and an amorphous form for PhPTCD PVD film. The infrared absorption spectroscopy points to a preferential flat-on organization of the molecules in the PVD films. In addition, the annealing process (200 deg C for 20 minutes) does not affect the supramolecular arrangement of the PhPTCD PVD films. (author)

Physical vapor deposited films of a perylene derivative: supramolecular arrangement and thermal stability

International Nuclear Information System (INIS)

Fernandes, Jose Diego; Alessio, Priscila; Silva, Matheus Rodrigues Medeiros; Aroca, Ricardo Flavio; Souza, Agda Eunice de; Constantino, Carlos Jose Leopoldo

2017-01-01

The analysis of supramolecular arrangement is essential to understand the role of this key factor on the optical and electrical properties of organic thin films. In this work, thin solid films of bis(phenethylimido) perylene (PhPTCD) fabricated using physical vapor deposition (PVD) technique (thermal evaporation), deposited simultaneously onto different substrates (Ag mirror, Ge, and quartz plates) contingent on the characterization technique. The main objective is to study the PhPTCD supramolecular arrangement and the thermal stability of this arrangement in PVD films. The ultraviolet-visible absorption reveals a controlled growth of the PVD films, and the micro-Raman scattering data show that the PhPTCD molecule is not thermally degraded in the conditions of these experiments. The microscopy also shows a homogeneous morphological surface of the PVD film at macro and micro scales, with molecular aggregates at nanoscale. Besides, the PVD film roughness does not follow substrate roughness. The X-ray diffraction indicates a crystalline structure for PhPTCD powder and an amorphous form for PhPTCD PVD film. The infrared absorption spectroscopy points to a preferential flat-on organization of the molecules in the PVD films. In addition, the annealing process (200 deg C for 20 minutes) does not affect the supramolecular arrangement of the PhPTCD PVD films. (author)

An Introduction to the Physics of Collisionless Shocks

International Nuclear Information System (INIS)

Russell, C.T.

2005-01-01

Collisionless shocks are important in astrophysical, heliospheric and magnetospheric settings. They deflect flows around obstacles; they heat the plasma, and they alter the properties of the flow as it intersects those obstacles. The physical processes occurring at collisionless shocks depend on the Mach number (strength) and beta (magnetic to thermal pressure) of the shocks and the direction of the magnetic field relative to the shock normal. Herein we review how the shock has been modeled in numerical simulations, the basic physical processes at work, including dissipation and thermalization, the electric potential drop at the shock, and the formation of the electron and ion foreshocks

Pramana – Journal of Physics | Indian Academy of Sciences

Indian Academy of Sciences (India)

Home; Journals; Pramana – Journal of Physics. P Elahi. Articles written in Pramana – Journal of Physics. Volume 65 Issue 1 July 2005 pp 95-105 Research Articles. The analytical investigation of the super-Gaussian pump source on the thermal, stress and thermo-optics properties of double-clad Yb:glass fiber lasers.

Proceedings of the 10. Meeting on Reactor Physics and Thermal Hydraulics; Anais do 10. Encontro de Fisica de Reatores e Termo-Hidraulica

Energy Technology Data Exchange (ETDEWEB)

Santos Bastos, W. dos

1995-12-31

These proceedings presents all the Meeting papers emphasizing specific aspects on reactor physics method, criticality, fuel management, nuclear data, safety analysis, simulation and shielding, neutronics, thermal hydraulics, reactor operation and computational methods.

Thermal, mechanical, and physical properties of seaweed/sugar palm fibre reinforced thermoplastic sugar palm Starch/Agar hybrid composites.

Science.gov (United States)

Jumaidin, Ridhwan; Sapuan, Salit M; Jawaid, Mohammad; Ishak, Mohamad R; Sahari, Japar

2017-04-01

The aim of this research is to investigate the effect of sugar palm fibre (SPF) on the mechanical, thermal and physical properties of seaweed/thermoplastic sugar palm starch agar (TPSA) composites. Hybridized seaweed/SPF filler at weight ratio of 25:75, 50:50 and 75:25 were prepared using TPSA as a matrix. Mechanical, thermal and physical properties of hybrid composites were carried out. Obtained results indicated that hybrid composites display improved tensile and flexural properties accompanied with lower impact resistance. The highest tensile (17.74MPa) and flexural strength (31.24MPa) was obtained from hybrid composite with 50:50 ratio of seaweed/SPF. Good fibre-matrix bonding was evident in the scanning electron microscopy (SEM) micrograph of the hybrid composites' tensile fracture. Fourier transform infrared spectroscopy (FT-IR) analysis showed increase in intermolecular hydrogen bonding following the addition of SPF. Thermal stability of hybrid composites was enhanced, indicated by a higher onset degradation temperature (259°C) for 25:75 seaweed/SPF composites than the individual seaweed composites (253°C). Water absorption, thickness swelling, water solubility, and soil burial tests showed higher water and biodegradation resistance of the hybrid composites. Overall, the hybridization of SPF with seaweed/TPSA composites enhances the properties of the biocomposites for short-life application; that is, disposable tray, plate, etc. Copyright © 2017 Elsevier B.V. All rights reserved.

Physical analysis of an electric resistor heating

Science.gov (United States)

Perea Martins, J. E. M.

2018-05-01

This work describes a simple experiment to measure the resistor temperature as a function of the applied power and proves that it is an efficient way to introduce some important physical concepts in classroom, including the Joule’s first law, hot-spot temperature, thermal resistance, thermal dissipation constant, time constant and the Newton’s law of cooling.

Thermal and hydrodynamic studies for micro-channel cooling for large area silicon sensors in high energy physics experiments

Energy Technology Data Exchange (ETDEWEB)

Flaschel, Nils; Ariza, Dario; Diez, Sergio; Gregor, Ingrid-Maria; Tackmann, Kerstin [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Gerboles, Marta; Jorda, Xavier; Mas, Roser; Quirion, David; Ullan, Miguel [Centro Nacional de Microelectronica, Barcelona (Spain)

2017-01-15

Micro-channel cooling initially aiming at small-sized high-power integrated circuits is being transferred to the field of high energy physics. Today's prospects of micro-fabricating silicon opens a door to a more direct cooling of detector modules. The challenge in high energy physics is to save material in the detector construction and to cool large areas. In this paper, we are investigating micro-channel cooling as a candidate for a future cooling system for silicon detectors in a generic research and development approach. The work presented in this paper includes the production and the hydrodynamic and thermal testing of a micro-channel equipped prototype optimized to achieve a homogeneous flow distribution. Furthermore, the device was simulated using finite element methods.

Thermal and hydrodynamic studies for micro-channel cooling for large area silicon sensors in high energy physics experiments

International Nuclear Information System (INIS)

Flaschel, Nils; Ariza, Dario; Diez, Sergio; Gregor, Ingrid-Maria; Tackmann, Kerstin; Gerboles, Marta; Jorda, Xavier; Mas, Roser; Quirion, David; Ullan, Miguel

2017-01-01

Micro-channel cooling initially aiming at small-sized high-power integrated circuits is being transferred to the field of high energy physics. Today's prospects of micro-fabricating silicon opens a door to a more direct cooling of detector modules. The challenge in high energy physics is to save material in the detector construction and to cool large areas. In this paper, we are investigating micro-channel cooling as a candidate for a future cooling system for silicon detectors in a generic research and development approach. The work presented in this paper includes the production and the hydrodynamic and thermal testing of a micro-channel equipped prototype optimized to achieve a homogeneous flow distribution. Furthermore, the device was simulated using finite element methods.

Multilayer insulation (MLI) in the Superconducting Super Collider: A practical engineering approach to physical parameters governing MLI thermal performance

International Nuclear Information System (INIS)

Gonczy, J.D.; Boroski, W.N.; Niemann, R.C.

1989-03-01

Multilayer insulation (MLI) is employed in cryogenic devices to control the heat load of those devices. The physics defining the thermal performance of an MLI system is extremely complex due to the thermal dynamics of numerous interdependent parameters which in themselves contribute differently depending on whether boundary conditions are transient or steady-state. The Multilayer Insulation system for the Superconducting Super Collider (SSC) consists of full cryostat length assemblies of aluminized polyester film, fabricated in the form of blankets, and installed as blankets to the 4.5K cold mass, and the 20K and 80K thermal radiation shields. Approximately 40,000 blankets will be required in the 10,000 cryogenic devices comprising the SSC accelerator. Each blanket will be nearly 56 feet long by 6 feet wide and will consist of as many as 32 reflective and 31 spacer layers of material. Discussed are MLI material choices, and the physical parameters which contribute to the operational performance of MLI systems. Disclosed is a method for fabricating MLI blankets by employing a large diameter winding mandrel having a circumference sufficient for the required blanket length. The blanket fabrication method assures consistency in mass produced MLI blankets by providing positive control of the dimensional parameters which contribute to the MLI blanket thermal performance. The fabrication method can be used to mass produce prefabricated MLI blankets that by virtue of the product have inherent features of dimensional stability, three-dimensional uniformity, controlled layer density, layer-to-layer registration, interlayer cleanliness, and interlayer material to accommodate thermal contraction differences. 9 refs., 4 figs., 2 tabs

Physics For All -- yes, it's real physics

Science.gov (United States)

Eisenkraft, Arthur

2012-02-01

Can ``all'' students learn ``real'' physics? We want to provide instruction to a wider segment of the population including those students who will not go into STEM (Science, Technology, Engineering, Math) careers. We also want to maintain the integrity of physics, challenge all students, and not compromise the rigor of our courses. Accomplishing this requires a research guided approach to instruction, curriculum and assessment. Physics First and Physics for All have become a success story for thousands of students in urban, suburban, and rural districts. At the same time, the International Physics Olympiad and other competitions have raised the expectation of what the most motivated students can achieve. Many physics educators are exploring ways to set higher goals for our most gifted students while also providing physics instruction to students previously excluded from our physics classes. Many of the same issues that K-12 educators are struggling with are equally important to the college community as colleges try to educate both future physicists and an educated citizenry. Great novels and symphonies are accessible to people of different backgrounds and levels of expertise. We should develop strategies that enable us to share an understanding of physics with all students because everyone deserves an opportunity to reflect on the wondrous workings of our universe.

The physics role of ITER

International Nuclear Information System (INIS)

Rutherford, P.H.

1997-04-01

Experimental research on the International Thermonuclear Experimental Reactor (ITER) will go far beyond what is possible on present-day tokamaks to address new and challenging issues in the physics of reactor-like plasmas. First and foremost, experiments in ITER will explore the physics issues of burning plasmas--plasmas that are dominantly self-heated by alpha-particles created by the fusion reactions themselves. Such issues will include (i) new plasma-physical effects introduced by the presence within the plasma of an intense population of energetic alpha particles; (ii) the physics of magnetic confinement for a burning plasma, which will involve a complex interplay of transport, stability and an internal self-generated heat source; and (iii) the physics of very-long-pulse/steady-state burning plasmas, in which much of the plasma current is also self-generated and which will require effective control of plasma purity and plasma-wall interactions. Achieving and sustaining burning plasma regimes in a tokamak necessarily requires plasmas that are larger than those in present experiments and have higher energy content and power flow, as well as much longer pulse length. Accordingly, the experimental program on ITER will embrace the study of issues of plasma physics and plasma-materials interactions that are specific to a reactor-scale fusion experiment. Such issues will include (i) confinement physics for a tokamak in which, for the first time, the core-plasma and the edge-plasma are simultaneously in a reactor-like regime; (ii) phenomena arising during plasma transients, including so-called disruptions, in regimes of high plasma current and thermal energy; and (iii) physics of a radiative divertor designed for handling high power flow for long pulses, including novel plasma and atomic-physics effects as well as materials science of surfaces subject to intense plasma interaction. Experiments on ITER will be conducted by researchers in control rooms situated at major

Physical electronics handbook of vacuum physics

CERN Document Server

Beck, A H

2013-01-01

Handbook of Vacuum Physics, Volume 2, Physical Electronics, discusses the fundamentals of electric discharges in gases. Electrical discharges in gases is used generically to denote the passage of electricity through a gas and implicitly embraces the wide variety of physical phenomena which accompany such a discharge of electricity. The discharge currents may be as small as 10-16A in certain ionization growth studies, or be as large as megamperes in thermonuclear and plasma physics studies. Key topics discussed include collision phenomena in gases; surface phenomena and transport of charged par

Physical removal of metallic carbon nanotubes from nanotube network devices using a thermal and fluidic process

International Nuclear Information System (INIS)

Ford, Alexandra C; Shaughnessy, Michael; Wong, Bryan M; Kane, Alexander A; Krafcik, Karen L; Léonard, François; Kuznetsov, Oleksandr V; Billups, W Edward; Hauge, Robert H

2013-01-01

Electronic and optoelectronic devices based on thin films of carbon nanotubes are currently limited by the presence of metallic nanotubes. Here we present a novel approach based on nanotube alkyl functionalization to physically remove the metallic nanotubes from such network devices. The process relies on preferential thermal desorption of the alkyls from the semiconducting nanotubes and the subsequent dissolution and selective removal of the metallic nanotubes in chloroform. The approach is versatile and is applied to devices post-fabrication. (paper)

EDITORIAL: Physics competitions Physics competitions

Science.gov (United States)

Jordens, H.; Mathelitsch, L.

2009-11-01

1. Physics competitions: aims and realizations One aim of physics competitions is to increase the interest of young students, primarily at upper secondary level, to physics and natural sciences in general. A competition has motivational aspects known usually from sports events or games—comparing one's own ability with others, of course with the desire to be better and to win. If competitions reach nationwide and even international levels, additional stimulation is created. Competitions provide greatest attraction to possible winners, to the group of gifted people in a particular field. This implies that science contests are excellent tools for the promotion of talented students. Traditional teaching has been shown to have problems in supporting this group of students. Very often teachers are overstretched with the demands of teaching both low- and high-level students. Extracurricular activities are therefore a good chance to relieve the teacher, and to give talented students the opportunity for appropriate training and challenge. The competitions, however, have a broader impact and address more young people than one might guess from the statements above. Training courses and selection at school level give a larger group of students extra and, to some extent, complimentary education in physics. The degree of complexity of the tasks corresponds very often to the standards of the next level of education in the school system. Interestingly, many physics competitions have their origin in countries beyond the former Iron Curtain. They started as regional and national tournaments, were joined by neighbouring countries and have grown, in some cases, to events with participants from more than 80 countries. Although the features mentioned above are common to the different competitions, there are distinct differences between them [1]. The International Physics Olympiad (IPhO) is the oldest international physics competition for students at upper secondary level [2]. It dates

Combustion physics

Science.gov (United States)

Jones, A. R.

1985-11-01

Over 90% of our energy comes from combustion. By the year 2000 the figure will still be 80%, even allowing for nuclear and alternative energy sources. There are many familiar examples of combustion use, both domestic and industrial. These range from the Bunsen burner to large flares, from small combustion chambers, such as those in car engines, to industrial furnaces for steel manufacture or the generation of megawatts of electricity. There are also fires and explosions. The bountiful energy release from combustion, however, brings its problems, prominent among which are diminishing fuel resources and pollution. Combustion science is directed towards finding ways of improving efficiency and reducing pollution. One may ask, since combustion is a chemical reaction, why physics is involved: the answer is in three parts. First, chemicals cannot react unless they come together. In most flames the fuel and air are initially separate. The chemical reaction in the gas phase is very fast compared with the rate of mixing. Thus, once the fuel and air are mixed the reaction can be considered to occur instantaneously and fluid mechanics limits the rate of burning. Secondly, thermodynamics and heat transfer determine the thermal properties of the combustion products. Heat transfer also plays a role by preheating the reactants and is essential to extracting useful work. Fluid mechanics is relevant if work is to be performed directly, as in a turbine. Finally, physical methods, including electric probes, acoustics, optics, spectroscopy and pyrometry, are used to examine flames. The article is concerned mainly with how physics is used to improve the efficiency of combustion.

Physics through the 1990s: Nuclear physics

International Nuclear Information System (INIS)

1986-01-01

This volume is the report of the Panel on Nuclear Physics of the Physics Survey Committee, established by the National Research Council in 1983. The report presents many of the major advances in nuclear physics during the past decade, sketches the impacts of nuclear physics on other sciences and on society, and describes the current frontiers of the field. It concludes with a chapter on the recommended priorities for this discipline

Fermilab | Science | Particle Physics | Benefits of Particle Physics

Science.gov (United States)

Photos and videos Latest news For the media Particle Physics Neutrinos Fermilab and the LHC Dark matter initiatives Research and development Key discoveries Benefits of particle physics Particle Accelerators society Particle Physics 101 Science of matter, energy, space and time How particle physics discovery

TEACHING PHYSICS: Connecting with Advancing Physics

Science.gov (United States)

Brown, L. M.

2000-05-01

A case is made for the Institute of Physics to provide services to back up physics courses in the first foundation year in British universities. There are several reasons why it is timely to consider such action. Firstly there are several physics departments in the country which are scarcely large enough to maintain a full four-year honours course while at the same time winning a lucrative research reputation. Secondly, if Advancing Physics, the new A-level initiative sponsored by the Institute of Physics, is successful, there will be a flood of new recruits into the subject, just at a time when the number of places available in universities is static or, more likely, falling. Thirdly, the new students will expect very high standards of presentation, for both practical and theoretical work: standards which, given the resources available to existing departments, will be very hard to provide under the present circumstances. It is proposed that the Standing Committee of Physics Professors should examine whether and in what ways the provision of IOP services to universities might be made. The SCPP is an appropriate body to manage such a resource.

PHYSICS

CERN Multimedia

D. Acosta

2010-01-01

A remarkable amount of progress has been made in Physics since the last CMS Week in June given the exponential growth in the delivered LHC luminosity. The first major milestone was the delivery of a variety of results to the ICHEP international conference held in Paris this July. For this conference, CMS prepared 15 Physics Analysis Summaries on physics objects and 22 Summaries on new and interesting physics measurements that exploited the luminosity recorded by the CMS detector. The challenge was incorporating the largest batch of luminosity that was delivered only days before the conference (300 nb-1 total). The physics covered from this initial running period spanned hadron production measurements, jet production and properties, electroweak vector boson production, and even glimpses of the top quark. Since then, the accumulated integrated luminosity has increased by a factor of more than 100, and all groups have been working tremendously hard on analysing this dataset. The September Physics Week was held ...

Physical Diversity of Phyllosilicate Deposits at the MSL Candidate Landing Sites

Science.gov (United States)

Fergason, R. L.

2008-12-01

The identification of phyllosilicates on Mars implies aqueous activity at the time of their formation and is important for understanding the history of Martian water and the past habitability of Mars. In addition, a significant fraction of the global water budget of Mars may be locked into clay mineral deposits within the Martian crust. As a result, six out of seven final landing sites being considered for the Mars Science Laboratory are sites where phyllosilicates have been identified in CRISM and OMEGA data. The physical characteristics of these materials, as identified using thermal inertia data, are an important component for understanding the geologic history of these deposits. Thermal inertia values provide information regarding effective particle size and help to constrain the possible presence of duricrust, rocks, and exposed bedrock at these locations. These identified physical characteristics suggest the degree of resistivity to erosion, which has implications for the post-emplacement modification of these deposits. At the aforementioned six locations (Nili Fossae Trough, Holden Crater, Mawrth Vallis, Miyamoto crater, southern Meridiani Planum, and Gale crater) the physical properties were quantified using THEMIS-derived thermal inertia data to characterize the physical properties at each site and identify the presence or absence of physical diversity among these materials. I identified a wide range of surface properties at these locations ranging from indurated surfaces intermixed with unconsolidated aeolian material (thermal inertia of 150-460 J m-2 K-1 s- 1/2) at Mawrth Vallis, to exposures of in-place bedrock and the presence of rocky material (thermal inertia exceeding 800 J m-2 K-1 s-1/2) in Gale crater. In addition, the surface texture and morphologic features observed in high-resolution visible images (such as narrow-angle MOC, HiRISE, and CTX) are dissimilar across these phyllosilicate exposures, and confirm the interpretation of thermal inertia

Feminist Physics Education: Deconstructed Physics and Students' Multiple Subjectivities

Science.gov (United States)

Jammula, Diane Crenshaw

Physics is one of the least diverse sciences; in the U.S. in 2010, only 21% of bachelors degrees in physics were awarded to women, 2.5% to African Americans, and 4% to Hispanic Americans (AIP, 2012). Though physics education reform efforts supporting interactive engagement have doubled students' learning gains (Hake, 1998), gender and race gaps persist (Brewe et al., 2010; Kost, Pollock, & Finkelstein, 2009). When students' subjectivities align with presentations of physics, they are more likely to develop positive physics identities (Hughes, 2001). However, both traditional and reformed physics classrooms may present physics singularly as abstract, elite, and rational (Carlone, 2004). Drawing from feminist science, I argue that binaries including abstract / concrete, elite / accessible, and rational / emotional are hierarchal and gendered, raced and classed. The words on the left define conventional physics and are associated with middle class white masculinity, while the words on the right are associated with femininity or other, and are often missing or delegitimized in physics education, as are females and minorities. To conceptualize a feminist physics education, I deconstructed these binaries by including the words on the right as part of doing physics. I do not imply that women and men think differently, but that broadening notions of physics may allow a wider range of students to connect with the discipline. I used this conceptual framework to modify a popular reformed physics curriculum called Modeling Instruction (Hestenes, 1987). I taught this curriculum at an urban public college in an introductory physics course for non-science majors. Twenty-three students of diverse gender, race, ethnic, immigrant and class backgrounds enrolled. I conducted an ethnography of the classroom to learn how students negotiate their subjectivities to affiliate with or alienate from their perceptions of physics, and to understand how classroom experiences exacerbate or

HTR core physics analysis at NRG

International Nuclear Information System (INIS)

Kuijper, J.C.; Haas, J.B.M. de; Oppe, J.

2002-01-01

Since a number of years NRG is developing the HTR reactor physics code system PANTHERMIX. In PANTHERMIX the 3-D steady-state and transient core physics code PANTHER has been interfaced with the HTR thermal hydraulics code THERMIX to enable core follow and transient analyses on both pebble bed and block type HTR systems. Recently the capabilities of PANTHERMIX have been extended with the possibility to simulate the flow of pebbles through the core cavity and the (re)loading of pebbles on top of the core.The PANTHERMIX code system is being applied for the benchmark exercises for the Chinese HTR-10 and Japanese HTTR first criticality, calculating the critical loading, control rod worth and the isothermal temperature coefficients at zero power conditions. Also core physics calculations have been performed on an early version the South African PBMR design. The reactor physics properties of the reactor at equilibrium core loading have been studied as well as a selected run-in scenario, starting form fresh fuel. The recently developed reload option of PANTHERMIX was used extensively in these analyses. The examples shown demonstrate the capabilities of PANTHERMIX for performing steady-state and transient HTR core physics analyses. However, additional validation, especially for transient analyses, remains desirable. (author)

TEACHING PHYSICS: Teaching particle physics

Science.gov (United States)

Hanley, Phil

2000-09-01

Particle physics attracts many students who hear of news from CERN or elsewhere in the media. This article examines which current A-level syllabuses include which bits of particle physics and surveys the many different types of resource available to teachers and students.

Physical and structural properties and thermal behaviour of starch-poly(ɛ-caprolactone) blend films for food packaging

OpenAIRE

Ortega Toro, Rodrigo; Contreras, Jessica; Talens Oliag, Pau; Chiralt A.

2015-01-01

Structural and physical properties (barrier, mechanical, and optical properties) and thermal behaviour of corn starch-PCL blend films, containing glycerol as plasticizer, obtained by compression moulding, at 160 °C and 130 bars, were studied. The stability on the films properties was also evaluated. Blend films showed phase separation of the polymers in a heterogeneous matrix with starch rich regions and PCL rich regions. Nevertheless, a small miscibility of PCL in the starch phase was detec...

Physics overview of AVLIS

International Nuclear Information System (INIS)

Solarz, R.W.

1985-02-01

Atomic vapor laser isotope separation (AVLIS) represents the largest-scale potential application of tunable lasers that has received serious attention within the chemical physics community. For over a decade the US Department of Energy has funded an aggressive program in AVLIS at Lawrence Livermore National Laboratory. After extensive research, the underlying physical principles have been identified and optimized, the major technology components have been developed, and the integrated enrichment performance of the process has been tested under realistic conditions. The central physical processes are outlined, progress to date on the technology elements is reviewed, and scaling laws that can be used to scope out new applications are fomulated. The two primary applications of major interest to the Department of Energy are the production of light-water reactor fuel and the conversion of fuel-grade plutonium to weapons-grade material. In FY 1984 the total AVLIS funding level for these two missions was approximately $150M. In addition to these primary missions, a variety of applications exist that all potentially use a common base of AVLIS technology. These include missions such as the enrichment of mercury isotopes to improve fluorescent lamp efficiency, the enrichment of iodine isotopes for medical isotope use, and the cleanup of strontium from defense waste for recovering strontium isotopes for radio-thermal mechanical generators. We will see that the ability to rapidly assess the economic and technical feasibility of each mission is derived from the general applicability of AVLIS physics and AVLIS technology

Thermal shock behavior of platinum aluminide bond coat/electron beam-physical vapor deposited thermal barrier coatings

Energy Technology Data Exchange (ETDEWEB)

Xu, Zhenhua, E-mail: zhxuciac@163.com [Beijing Institute of Aeronautical Materials, Department 5, P.O. Box 81-5, Beijing 100095 (China); Dai, Jianwei [Beijing Institute of Aeronautical Materials, Department 5, P.O. Box 81-5, Beijing 100095 (China); Niu, Jing [Shenyang Liming Aero-engine (Group) Corporation Ltd., Institute of Metallurgical Technology, Technical Center, Shengyang 110043 (China); Li, Na; Huang, Guanghong; He, Limin [Beijing Institute of Aeronautical Materials, Department 5, P.O. Box 81-5, Beijing 100095 (China)

2014-12-25

Highlights: • TBCs of (Ni, Pt)Al bond coat with grit blasting process and YSZ ceramic coating. • Grain boundary ridges are the sites for spallation damage initiation in TBCs. • Ridges removed, cavities formation appeared and the damage initiation deteriorated. • Damage initiation and progression at interface lead to a buckling failure. - Abstract: Thermal barrier coating systems (TBCs) including of chemical vapor deposited (Ni, Pt)Al bond coat with grit blasting process and electron beam physical vapor deposited Y{sub 2}O{sub 3}-stabilized-ZrO{sub 2} (YSZ) ceramic coating were investigated. The phase structures, surface and cross-sectional morphologies, thermal shock behaviors and residual stresses of the coatings were studied in detail. Grain boundary ridges still remain on the surface of bond coat prior to the deposition of the ceramic coating, which are shown to be the major sites for spallation damage initiation in TBCs. When these ridges are mostly removed, they appear some of cavities formation and then the damage initiation mode is deteriorated. Damage initiation and progression occurs at the bond coat to thermally grown oxide (TGO) interface leading to a buckling failure behavior. A buckle failure once started may be arrested when it runs into a region of high bond coat to TGO interface toughness. Thus, complete failure requires further loss in toughness of the bond coat to TGO interface during cooling. The suppressed cavities formation, the removed ridges at the grain boundaries, the relative high TGO to bond coat interface toughness, the uniform growth behavior of TGO thickening and the lower of the residual stress are the primary factors for prolonging the lifetime of TBCs.

Fuel Thermo-physical Characterization Project: Evaluation of Models to Calculate Thermal Diffusivity of Layered Composites

Energy Technology Data Exchange (ETDEWEB)

Burkes, Douglas [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Casella, Amanda J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gardner, Levi D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Casella, Andrew M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Huber, Tanja K. [Technische Universität München, Munich (Germany); Breitkreutz, Harald [Technische Universität München, Munich (Germany)

2015-02-11

The Office of Material Management and Minimization Fuel Thermo-physical Characterization Project at Pacific Northwest National Laboratory (PNNL) is tasked with using PNNL facilities and processes to receive irradiated low enriched uranium-molybdenum fuel plate samples and perform analyses in support of the Office of Material Management and Minimization Reactor Conversion Program. This work is in support of the Fuel Development Pillar that is managed by Idaho National Laboratory. A key portion of the scope associated with this project was to measure the thermal properties of fuel segments harvested from plates that were irradiated in the Advanced Test Reactor. Thermal diffusivity of samples prepared from the fuel segments was measured using laser flash analysis. Two models, one developed by PNNL and the other developed by the Technische Universität München (TUM), were evaluated to extract the thermal diffusivity of the uranium-molybdenum alloy from measurements made on the irradiated, layered composites. The experimental data of the “TC” irradiated fuel segment was evaluated using both models considering a three-layer and five-layer system. Both models are in acceptable agreement with one another and indicate that the zirconium diffusion barrier has a minimal impact on the overall thermal diffusivity of the monolithic U-Mo fuel.

Assessing physical function and physical activity in patients with CKD.

Science.gov (United States)

Painter, Patricia; Marcus, Robin L

2013-05-01

Patients with CKD are characterized by low levels of physical functioning, which, along with low physical activity, predict poor outcomes in those treated with dialysis. The hallmark of clinical care in geriatric practice and geriatric research is the orientation to and assessment of physical function and functional limitations. Although there is increasing interest in physical function and physical activity in patients with CKD, the nephrology field has not focused on this aspect of care. This paper provides an in-depth review of the measurement of physical function and physical activity. It focuses on physiologic impairments and physical performance limitations (impaired mobility and functional limitations). The review is based on established frameworks of physical impairment and functional limitations that have guided research in physical function in the aging population. Definitions and measures for physiologic impairments, physical performance limitations, self-reported function, and physical activity are presented. On the basis of the information presented, recommendations for incorporating routine assessment of physical function and encouragement for physical activity in clinical care are provided.

Tokamak physics experiment: Diagnostic windows study

International Nuclear Information System (INIS)

Merrigan, M.; Wurden, G.A.

1995-11-01

We detail the study of diagnostic windows and window thermal stress remediation in the long-pulse, high-power Tokamak Physics Experiment (TPX) operation. The operating environment of the TPX diagnostic windows is reviewed, thermal loads on the windows estimated, and cooling requirements for the windows considered. Applicable window-cooling technology from other fields is reviewed and its application to the TPX windows considered. Methods for TPX window thermal conditioning are recommended, with some discussion of potential implementation problems provided. Recommendations for further research and development work to ensure performance of windows in the TPX system are presented

Elementary particle physics in early physics education

CERN Document Server

Wiener, Gerfried

2017-01-01

Current physics education research is faced with the important question of how best to introduce elementary particle physics in the classroom early on. Therefore, a learning unit on the subatomic structure of matter was developed, which aims to introduce 12-year-olds to elementary particles and fundamental interactions. This unit was iteratively evaluated and developed by means of a design-based research project with grade-6 students. In addition, dedicated professional development programmes were set up to instruct high school teachers about the learning unit and enable them to investigate its didactical feasibility. Overall, the doctoral research project led to successful results and showed the topic of elementary particle physics to be a viable candidate for introducing modern physics in the classroom. Furthermore, thanks to the design-based research methodology, the respective findings have implications for both physics education and physics education research, which will be presented during the PhD defen...

The effects of the physical states of a simulated fission product on the linear thermal expansion of (U0.924Ce0.076)O2

International Nuclear Information System (INIS)

Kim, Dong-Joo; Kim, Yong-Soo; Yang, Jae-Ho; Kim, Si-Hyung; Lee, Young-Woo; Kim, Han-Soo

2006-01-01

The linear thermal expansions of an (U 0.924 Ce 0.076 )O 2 pellet, doped a simulated fission product (Nd 2 O 3 or Ru), were measured from room temperature to 1673 K in a flowing argon atmosphere using TMA. Nd 2 O 3 and Ru represent the physical states of a fission product, a dissolved oxide and a metallic precipitate, respectively. Using the measured data, the mean coefficients of a linear thermal expansion was obtained as a function of the temperature, and the effects of the physical states of a simulated fission product on the thermal expansion were investigated. In the case of the Nd 2 O 3 forming a dissolved oxide, the thermal expansion of the sample increased and the increment was proportional to the Nd contents, because the melting point of the Nd 2 O 3 was lower than that of UO 2 and although the metallic precipitate hardly affected the crystal structure, the linear thermal expansion also increased with an increasing Ru contents

Complex evaluation of student‘s physical activity by physical health, physical fitness and body composition parameters

OpenAIRE

Šiupšinskas, Laimonas

2007-01-01

Physical activity level of students is decreasing. Students are specific population group with similar patterns of habitual physical activity influenced by study process. That formed requirement to search for a new ways to assess physical activity of the students indirectly. Offered method assesses level of physical health, measures physical fitness and evaluates body composition. The aim of the study is to evaluate indirectly measured health-enhanced physical activity of the students by phys...

Promoting Physical Activity in Adapted Physical Education

Science.gov (United States)

Yun, Joonkoo; Beamer, Jennifer

2018-01-01

The importance of physical activity has received considerable attention during the past decade. Physical education has been viewed as a cost-effective way to promote physical activity as a public health initiative. In fact, the Centers for Disease Control and Prevention recommends that a "substantial percentage" of students' overall…

PHYSICS

CERN Multimedia

D. Futyan

A lot has transpired on the “Physics” front since the last CMS Bulletin. The summer was filled with preparations of new Monte Carlo samples based on CMSSW_3, the finalization of all the 10 TeV physics analyses [in total 50 analyses were approved] and the preparations for the Physics Week in Bologna. A couple weeks later, the “October Exercise” commenced and ran through an intense two-week period. The Physics Days in October were packed with a number of topics that are relevant to data taking, in a number of “mini-workshops”: the luminosity measurement, the determination of the beam spot and the measurement of the missing transverse energy (MET) were the three main topics.   Physics Week in Bologna The second physics week in 2009 took place in Bologna, Italy, on the week of Sep 7-11. The aim of the week was to review and establish (we hoped) the readiness of CMS to do physics with the early collisions at the LHC. The agenda of the...

PHYSICS

CERN Multimedia

D. Futyan

A lot has transpired on the “Physics” front since the last CMS Bulletin. The summer was filled with preparations of new Monte Carlo samples based on CMSSW_3, the finalization of all the 10 TeV physics analyses [in total 50 analyses were approved] and the preparations for the Physics Week in Bologna. A couple weeks later, the “October Exercise” commenced and ran through an intense two-week period. The Physics Days in October were packed with a number of topics that are relevant to data taking, in a number of “mini-workshops”: the luminosity measurement, the determination of the beam spot and the measurement of the missing transverse energy (MET) were the three main topics.  Physics Week in Bologna The second physics week in 2009 took place in Bologna, Italy, on the week of Sep 7-11. The aim of the week was to review and establish how ready we are to do physics with the early collisions at the LHC. The agenda of the week was thus pac...

Physically Compromised and Physically Talented Children in Northeastern Slovenia

Directory of Open Access Journals (Sweden)

Planinšec Jurij

2012-12-01

Full Text Available The aim of our research was to determine the share of physically compromised and physically talented children in northeastern Slovenia. The sample comprised 621 children aged nine to eleven years, among which there were 316 girls (M=10; SD=0.8 and 305 boys (M=10; SD=0.81. In order to assess their motor skills, seven different tests were used, mostly from Eurofit test battery, which covered explosive power, repetitive power balance, eye–hand coordination, speed of simple movements, whole body coordination, and endurance. The assessment was made for each physical fitness test separately. The cut-off points for determination of physically compromised and physically talented children were set at -1SD and +1SD, respectively. The results of all physical fitness tests showed that the share of physically compromised children exceeded ten percent for both genders. The largest number of boys and girls were physically compromised with regard to endurance and balance, respectively. On the other hand, boys proved to be most physically talented with regard to endurance, and girls with regard to explosive power. Gender differences were most obvious with regard to general endurance, as 21 per cent of the boys were physically compromised as opposed to 13 per cent of the girls. As for physical talent, we observed less gender-related differences. The results indicate increasing differences in physical fitness among children from northeastern Slovenia. The implementation of curricular and extracurricular sports activities should aim at reducing the number of physically compromised children. On the other hand, it would make sense to encourage physically talented children to get involved in organized forms of exercise.

Statistical Physics of Nanoparticles in the Gas Phase

CERN Document Server

Hansen, Klavs

2013-01-01

Thermal processes are ubiquitous and an understanding of thermal phenomena is essential for a complete description of the physics of nanoparticles, both for the purpose of modeling the dynamics of the particles and for the correct interpretation of experimental data. This book has the twofold aim to present coherently the relevant results coming from the recent scientific literature and to guide the readers through the process of deriving results, enabling them to explore the limits of the mathematical approximations and test the power of the method. The book is focused on the fundamental properties of nanosystems in the gas phase. For this reason there is a strong emphasis on microcanonical physics. Each chapter is enriched with exercises and 3 Appendices provide additional useful materials.

EDITORIAL: Physics competitions Physics competitions

Science.gov (United States)

Jordens, H.; Mathelitsch, L.

2011-07-01

International tests on competences, such as TIMSS or PISA, and knowledge of young students have revealed low average scores in many countries, often unexpectedly. One effective measure to increase the average standard of a population is to bring the last third of the group to a higher level. Therefore, many nations put some effort into this activity. This brings the danger that not enough attention is paid to students at the other end, those who are talented. Indeed, it is a very difficult task for a teacher to support the less able and at the same time challenge the gifted students, to lead them to the limits of their abilities and provide for a smooth transition to university study. Physics competitions have been proven to fulfil these last demands to a large degree, and therefore are an important additional and, to some extent, complementary tool for the promotion of talented students. This third special section on physics competitions in European Journal of Physics contains three papers, each dealing with a different form of science contest. The first continues the series of presentations of tasks performed at the International Young Physicists' Tournament, which was held in Vienna in 2011. First place went to the team from Singapore, and they have put their investigation on vertical oscillations of coupled magnets into written form (not required by the tournament, where an oral presentation and a defence and discussion are the central aspects). Their paper shows how rich in physics this problem is, and what level of solutions high-school students can already achieve. Sadly, those responsible for the organization of last year's International Physics Olympiad did not provide us with a report on this competition. This is unfortunate, since the Olympiad in Zagreb was very successful and, in particular, the experimental tasks were creative and demanding. Very similar to the aims and the execution of the Physics Olympiad is the International Olympiad on Astronomy

Holographic duality in condensed matter physics

CERN Document Server

Zaanen, Jan; Sun, Ya-Wen; Schalm, Koenraad

2015-01-01

A pioneering treatise presenting how the new mathematical techniques of holographic duality unify seemingly unrelated fields of physics. This innovative development morphs quantum field theory, general relativity and the renormalisation group into a single computational framework and this book is the first to bring together a wide range of research in this rapidly developing field. Set within the context of condensed matter physics and using boxes highlighting the specific techniques required, it examines the holographic description of thermal properties of matter, Fermi liquids and superconductors, and hitherto unknown forms of macroscopically entangled quantum matter in terms of general relativity, stars and black holes. Showing that holographic duality can succeed where classic mathematical approaches fail, this text provides a thorough overview of this major breakthrough at the heart of modern physics. The inclusion of extensive introductory material using non-technical language and online Mathematica not...

Assessment of senior pupils’ physical fitness considering physical condition indicators

Directory of Open Access Journals (Sweden)

I.R. Bodnar

2016-12-01

Full Text Available Consideration of physical condition indicators in assessment pupils’ physical fitness permits to differentiate training and health restoration processes at physical culture lessons. Purpose: to substantiate criteria for pupils’ physical fitness assessment, considering their physical condition indicators. Material: in the research 10-11 form pupils (n=406; 211boys and 195 girls participated. After physical fitness testing by requirement of acting programs we carried out diagnostic of pupils’ psycho-emotional state. Results: by results of physical; fitness we observed substantial deviation from universal law of normal distribution. It was found that physical condition indicators of most pupils are beyond normal. It was also determined that the most informative indicators are body length, chest circumference and body relative mass. We substantiated that it is necessary to consider physical condition indicators, when determining physical fitness level. We also substantiated and worked out differentiated normative for assessment pupils’ physical fitness. Conclusions: testing without consideration physical condition indicators does not facilitate pupils’ motivation for further physical self-perfection. Such testing results in high situational anxiety and unfavorable psycho-emotional state of pupils.

Physics Division semiannual report, July 1-December 31, 1982

International Nuclear Information System (INIS)

Trela, W.J.

1983-09-01

The Physics Division is organized into three major research areas: Fusion Physics, Weapons Physics, and Basic Research. In Fusion Physics, the KrF laser project reached two important milestones: successful testing of a 1-m 2 electron diode for KrF gas excitation and completion of a combined aperture demonstration showing the feasibility of accurate alignment of spherical mirrors. In the CO 2 program, the 5-kJ Helios lasers were used to evaluate many physics issues concerning the use of 10-μm light for inertial fusion and the 30- to 40-kJ Antares laser construction projects is on schedule for completion in October 1983. In Weapons Physics, significant progress was made on developing continuous time-dependent imaging systems using tomographic techniques with 400-ps shuttering capability, fiber-optic Cerenkov detector systems for fast fusion measurements, and iron-doped indium-phosphide detectors with 70-ps impulse response. A proposal to build x-ray beam lines at the National Synchrotron Light Source was approved and we expect funding in 1984. In Basic Physics Research, we have begun new initiatives to study biomagnetism in collaboration with the Life Sciences Division and to develop a neutrino physics program. During this period numerous significant experiments were completed in our nuclear physics, condensed matter physics, and thermal physics programs

Section for nuclear physics and energy physics - Annual report

International Nuclear Information System (INIS)

1994-08-01

This annual report summarizes the research and development activities of the Section for Nuclear Physics and Energy Physics at the University of Oslo in 1993. It includes experimental and theoretical nuclear physics, as well as other fields of physics in which members of the section have participated. The report describes completed projects nd work currently in progress. As in previous years, the experimental activities in nuclear physics have mainly been centered around the Cyclotron Laboratory with the SCANDITRONIX MC-35 Cyclotron. Using the CACTUS multidetector system, several experiments have been completed. Some results have been published while more data remains to be analyzed. In experimental nuclear physics the section staff members are engaged within three main fields: nuclei at high temperature, high spin nuclear structure and high and intermediate energy nuclear physics. In theoretical physics the group is concerned with the many-body description of nuclear properties as well as with the foundation of quantum physics

The thermal Z-isomerization-induced change in solubility and physical properties of (all-E)-lycopene.

Science.gov (United States)

Murakami, Kazuya; Honda, Masaki; Takemura, Ryota; Fukaya, Tetsuya; Kubota, Mitsuhiro; Wahyudiono; Kanda, Hideki; Goto, Motonobu

2017-09-16

The effect of Z-isomerization of (all-E)-lycopene on its solubility in organic solvents and physical properties was investigated. Lycopene samples containing different Z-isomer contents (23.8%, 46.9%, and 75.6% of total lycopene) were prepared from high-purity (all-E)-lycopene by thermal Z-isomerization in dichloromethane (CH 2 Cl 2 ). As the Z-isomer content increased, the relative solubility of lycopene significantly improved. Although (all-E)-lycopene barely dissolved in ethanol (0.6 mg/L), the solubilities of lycopene containing 23.8%, 46.9%, and 75.6% Z-isomers were 484.5, 914.7, and 2401.7 mg/L, respectively. Furthermore, differential scanning calorimetry (DSC), powder X-ray diffraction (XRD), and scanning electron microscopy (SEM) analyses clearly indicated that (all-E)-lycopene was present in the crystal state, while Z-isomers of lycopene were present in amorphous states. A number of studies have suggested that Z-isomers of lycopene are better absorbed in the human body than the all-E-isomer. This may be due to the change in solubility and physical properties of lycopene by the Z-isomerization. Copyright © 2017 Elsevier Inc. All rights reserved.

Cryogenic detectors for particle physics

International Nuclear Information System (INIS)

Gonzalez-Mestres, L.; Perret-Gallix, D.

1988-11-01

A comprehensive introduction to cryogenic detector developments for particle physics is presented, covering conventional detectors cooled to low temperature (scintillators and semiconductors), superconductive and thermal sensitive devices, as well as the basics of cold electronics. After giving a critical overview of current work, we elaborate on possible new ways for further improvements and briefly evaluate the feasibility of the main proposed applications

IAEA Coordinated Research Project on HTGR Reactor Physics, Thermal-hydraulics and Depletion Uncertainty Analysis

Energy Technology Data Exchange (ETDEWEB)

Strydom, Gerhard [Idaho National Lab. (INL), Idaho Falls, ID (United States); Bostelmann, F. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-09-01

The continued development of High Temperature Gas Cooled Reactors (HTGRs) requires verification of HTGR design and safety features with reliable high fidelity physics models and robust, efficient, and accurate codes. The predictive capability of coupled neutronics/thermal-hydraulics and depletion simulations for reactor design and safety analysis can be assessed with sensitivity analysis (SA) and uncertainty analysis (UA) methods. Uncertainty originates from errors in physical data, manufacturing uncertainties, modelling and computational algorithms. (The interested reader is referred to the large body of published SA and UA literature for a more complete overview of the various types of uncertainties, methodologies and results obtained). SA is helpful for ranking the various sources of uncertainty and error in the results of core analyses. SA and UA are required to address cost, safety, and licensing needs and should be applied to all aspects of reactor multi-physics simulation. SA and UA can guide experimental, modelling, and algorithm research and development. Current SA and UA rely either on derivative-based methods such as stochastic sampling methods or on generalized perturbation theory to obtain sensitivity coefficients. Neither approach addresses all needs. In order to benefit from recent advances in modelling and simulation and the availability of new covariance data (nuclear data uncertainties) extensive sensitivity and uncertainty studies are needed for quantification of the impact of different sources of uncertainties on the design and safety parameters of HTGRs. Only a parallel effort in advanced simulation and in nuclear data improvement will be able to provide designers with more robust and well validated calculation tools to meet design target accuracies. In February 2009, the Technical Working Group on Gas-Cooled Reactors (TWG-GCR) of the International Atomic Energy Agency (IAEA) recommended that the proposed Coordinated Research Program (CRP) on

Physical and thermal waste utilisation in industrial high-temperature processes; Stoffliche und thermische Verwertung von Abfaellen in industriellen Hochtemperaturprozessen. Fachseminar

Energy Technology Data Exchange (ETDEWEB)

Leithner, R. [ed.

1998-09-01

This year`s DVV Colloquium, the eleventh of its kind, was dedicated to ``Physical and thermal waste utilisation in industrial high-temperature processes``, a topic of growing importance in our time. The three old principles of Disperse, Bury, and Forget having been found inexpedient, there is now a growing interest in the three new principles of Avoid, Reduce, and Utilise. The colloquium saw a scientific discussion on physical and thermal waste utilisation in high-temperature processes. Proposals were made for the solution of specific problems, and the economic implications and impact of these solutions on products and the environment were elucidated. [Deutsch] Das diesjaehrige 11. DVV-Kolloquium mit dem Thema: `Stoffliche und thermische Verwertung von Abfaellen in industriellen Hochtemperaturprozessen`, behandelt einen Themenkomplex, der immer mehr an Bedeutung gewinnt. Nachdem sich die drei alten Prinzipien Verteilen, Vergraben, Vergessen als unzweckmaessig herausgestellt haben, gewinnen die drei neuen Prinzipien Vermeiden, Vermindern, Verwerten immer groessere Bedeutung. Stoffliche und thermische Verwertung in industriellen Hochtemperaturprozessen werden in diesem Kolloquium wissenschaftlich diskutiert und Loesungsvorschlaege und deren wirtschaftliche Implikationen und deren Auswirkungen auf die Produkte und die Umwelt beleuchtet. (orig.)

Statistical Physics

CERN Document Server

Mandl, Franz

1988-01-01

The Manchester Physics Series General Editors: D. J. Sandiford; F. Mandl; A. C. Phillips Department of Physics and Astronomy, University of Manchester Properties of Matter B. H. Flowers and E. Mendoza Optics Second Edition F. G. Smith and J. H. Thomson Statistical Physics Second Edition E. Mandl Electromagnetism Second Edition I. S. Grant and W. R. Phillips Statistics R. J. Barlow Solid State Physics Second Edition J. R. Hook and H. E. Hall Quantum Mechanics F. Mandl Particle Physics Second Edition B. R. Martin and G. Shaw The Physics of Stars Second Edition A. C. Phillips Computing for Scient

Environmental physics

CERN Document Server

Smith, Clare

2001-01-01

Environmental Physics is a comprehensive introduction to the physical concepts underlying environmental science. The importance and relevance of physics is emphasised by its application to real environmental problems with a wide range of case studies. Applications included cover energy use and production, global climate, the physics of living things, radioactivity, environmental remote sensing, noise pollution and the physics of the Earth. The book makes the subject accessible to those with little physics background, keeping mathematical treatment straightforward. The text is lively and informative, and is supplemented by numerous illustrations, photos, tables of useful data, and a glossary of key terms.

Teaching ``The Physics of Energy'' at MIT

Science.gov (United States)

Jaffe, Robert

2009-05-01

New physics courses on energy are popping up at colleges and universities across the country. Many require little or no previous physics background, aiming to introduce a broad audience to this complex and critical problem, often augmenting the scientific message with economic and policy discussions. Others are advanced courses, focussing on highly specialized subjects like solar voltaics, nuclear physics, or thermal fluids, for example. About two years ago Washington Taylor and I undertook to develop a course on the ``Physics of Energy'' open to all MIT students who had taken MIT's common core of university level calculus, physics, and chemistry. By avoiding higher level prerequisites, we aimed to attract and make the subject relevant to students in the life sciences, economics, etc. --- as well as physical scientists and engineers --- who want to approach energy issues in a sophisticated and analytical fashion, exploiting their background in calculus, mechanics, and E & M, but without having to take advanced courses in thermodynamics, quantum mechanics, or nuclear physics beforehand. Our object was to interweave teaching the fundamental physics principles at the foundations of energy science with the applications of those principles to energy systems. We envisioned a course that would present the basics of statistical, quantum, and fluid mechanics at a fairly sophisticated level and apply those concepts to the study of energy sources, conversion, transport, losses, storage, conservation, and end use. In the end we developed almost all of the material for the course from scratch. The course debuted this past fall. I will describe what we learned and what general lessons our experience might have for others who contemplate teaching energy physics broadly to a technically sophisticated audience.

Physical and thermal waste utilisation in the nonferrous metal industry; Stoffliche und thermische Abfallverwertung in der Nichteisenmetallindustrie

Energy Technology Data Exchange (ETDEWEB)

Sowa, F. [DMT-Gesellschaft fuer Forschung und Pruefung mbH, Essen (Germany)

1998-09-01

In its amended form the German Household Waste Technical Code favours physical and thermal utilisation of wastes against dumping. Industrial processes offer various ways of utilising wastes with a high calorific value, e.g. in nonferrous metal production. Besides portraying this branch of industry in Germany the present paper investigates to what extent this topic has already found coverage and what potential it holds for the utilisation of wastes. By way of example it describes a successful demonstration of the physical utilisation of sewage sludge in lead production. [Deutsch] Die Neugestaltung der TA Siedlungsabfall favorisiert die thermische und stoffliche Verwertung von Abfallstoffen gegenueber der Deponierung. Moeglichkeiten fuer die Verwertung heizwertreicher Abfaelle bieten auch industrielle Produktionsprozesse, z.B. auch in der Nichteisenmetallerzeugung. Neben einer Charakterisierung der Branche wird untersucht, inwieweit dieses Thema bereits aufgegriffen worden ist und welches Verwertungspotential zur Verfuegung steht. An einem Beispiel wird die erfolgreiche Demonstration der stofflichen Verwertung von Klaerschlamm in der Bleierzeugung dargestellt. (orig.)

Thermal barrier coatings of rare earth materials deposited by electron beam-physical vapor deposition

Energy Technology Data Exchange (ETDEWEB)

Xu Zhenhua [State Key Laboratory of Rare Earth Resource Utilization, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022 (China); Graduate School of Chinese Academy of Sciences, Beijing 100039 (China); Beijing Institute of Aeronautical Materials, Department 5, P.O. Box 81-5, Beijing 100095 (China); He Limin, E-mail: he_limin@yahoo.co [Beijing Institute of Aeronautical Materials, Department 5, P.O. Box 81-5, Beijing 100095 (China); Chen Xiaolong; Zhao Yu [State Key Laboratory of Rare Earth Resource Utilization, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022 (China); Graduate School of Chinese Academy of Sciences, Beijing 100039 (China); Cao Xueqiang, E-mail: xcao@ciac.jl.c [State Key Laboratory of Rare Earth Resource Utilization, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022 (China)

2010-10-15

Thermal barrier coatings (TBCs) have very important applications in gas turbines for higher thermal efficiency and protection of components at high temperature. TBCs of rare earth materials such as lanthanum zirconate (La{sub 2}Zr{sub 2}O{sub 7}, LZ), lanthanum cerate (La{sub 2}Ce{sub 2}O{sub 7}, LC), lanthanum cerium zirconate (La{sub 2}(Zr{sub 0.7}Ce{sub 0.3}){sub 2}O{sub 7}, LZ7C3) were prepared by electron beam-physical vapor deposition (EB-PVD). The composition, crystal structure, cross-sectional morphology and cyclic oxidation behavior of these coatings were studied. These coatings have partially deviated from their original compositions due to the different evaporation rates of oxides, and the deviation could be reduced by properly controlling the deposition condition. A double ceramic layer-thermal barrier coatings (DCL-TBCs) of LZ7C3 and LC could also be deposited with a single LZ7C3 ingot by properly controlling the deposition energy. LaAlO{sub 3} is formed due to the chemical reaction between LC and Al{sub 2}O{sub 3} in the thermally grown oxide (TGO) layer. The failure of DCL-TBCs is a result of the sintering-induced of LZ7C3 coating and the chemical incompatibility of LC and TGO. Since no single material that has been studied so far satisfies all the requirements for high temperature applications, DCL-TBCs are an important development direction of TBCs.

National Physics Conference

International Nuclear Information System (INIS)

Oancea, Margareta; Sandu, Doina; Calboreanu, Rodica

2000-01-01

The National Physics Conference organized annually by the Romanian Physical Society has been held in Constanta, Romania on September 21-23, 2000. It covered the following 12 sections: - 1. Astrophysics and High Energy (9 reports); - 2. Atomic and Molecular Physics (20 reports); - 3. Nuclear Physics (18 reports); - 4. Technical and Engineering Physics (34 reports); - 5. Condensed Matter Physics (67 reports); - 6. Optics and Quantum Electronics (12 reports); - 7. Plasma Physics (27 reports); - 8. Biophysics (30 reports); - 9. Physics for Energy (17 reports); - 10. Mathematical and Computational Physics (20 reports); -11. Physics and Education (8 reports); - 12. Earth and Environmental Physics (16 reports). The proceedings contains mainly short communications

Perceived physical competence towards physical activity, and motivation and enjoyment in physical education as longitudinal predictors of adolescents' self-reported physical activity.

Science.gov (United States)

Timo, Jaakkola; Sami, Yli-Piipari; Anthony, Watt; Jarmo, Liukkonen

2016-09-01

The aim of the study was to investigate if adolescents' perceived physical competence towards physical activity (PA), and autonomous motivation and enjoyment in physical education (PE) during early adolescence can predict amount and intensity of self-reported physical activity six years later. This study utilized a 6-year longitudinal data set collected within Finnish school settings. Students responded to questionnaires measuring their perceived physical competence towards physical activity, and autonomous motivation and enjoyment in PE during their first year at middle school (Grade 7), and their PA engagement during their last year in high school (Grade 12). A sample of 333 students (200 girls, 133 boys; M age=12.41, years, SD=.27) participated in the study. Perceived physical competence in physical activity was assessed by the sport competence dimension of the Physical Self-Perception Profile, autonomous motivation in PE was assessed by the Sport Motivation Scale and enjoyment in PE by the Sport Enjoyment Scale. Students' self-reported metabolic equivalent (MET) and PA intensity (light [LPA], moderate [MPA], vigorous [VPA]) was calculated from the short form of International Physical Activity Questionnaire. Perceived physical competence towards physical activity significantly predicted total METs (β=.28), MPA (β=.18) and VPA (β=.29) six years later. Autonomous motivation and enjoyment in PE at Grade 7, however, were not significant predictors of later PA. The results of this study support the proposition that self-perception of an individual's abilities arising from interactions with the environment related to PA during early puberty has an influential effect on later PA behaviour. Copyright © 2015 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

Physical hypermedia: augmenting physical material with hypermedia structures

DEFF Research Database (Denmark)

Grønbæk, Kaj; Ørbæk, Peter; Kristensen, Jannie Friis

2003-01-01

This paper introduces the notion of physical hypermedia, addressing the problem of organizing material in mixed digital and physical environments. Based on empirical studies, we propose concepts for collectional actions and meta-data actions, and present prototypes combining principles from...... augmented reality and hypermedia to support organization of mixtures of digital and physical materials. Our prototype of a physical hypermedia system is running on an augmented architect's desk and digital walls utilizing Radio Frequency Identifier (RFID) tags as well as visual tags tracked by cameras....... It allows users to tag physical materials, and have these tracked by readers (antennas) that may become pervasive in our work environments. In the physical hypermedia system, we work with three categories of RFID tags: simple object tags, collectional tags, and tooltags invoking operations such as grouping...

Exoplanet atmospheres physical processes

CERN Document Server

Seager, Sara

2010-01-01

Over the past twenty years, astronomers have identified hundreds of extrasolar planets--planets orbiting stars other than the sun. Recent research in this burgeoning field has made it possible to observe and measure the atmospheres of these exoplanets. This is the first textbook to describe the basic physical processes--including radiative transfer, molecular absorption, and chemical processes--common to all planetary atmospheres, as well as the transit, eclipse, and thermal phase variation observations that are unique to exoplanets. In each chapter, Sara Seager offers a conceptual introduction, examples that combine the relevant physics equations with real data, and exercises. Topics range from foundational knowledge, such as the origin of atmospheric composition and planetary spectra, to more advanced concepts, such as solutions to the radiative transfer equation, polarization, and molecular and condensate opacities. Since planets vary widely in their atmospheric properties, Seager emphasizes the major p...

The relationship between physical activity and physical self-esteem in adolescents: the role of physical fitness indices.

Science.gov (United States)

Haugen, Tommy; Ommundsen, Yngvar; Seiler, Stephen

2013-02-01

The aim of this study was to investigate if physical fitness (strength/power, endurance, flexibility and coordination) mediates the cross-sectional relationship between physical activity and physical self-perception (athletic competence and physical appearance) in a sample of 15-year old adolescents. We wanted to investigate the relative strength of each indirect effect. The present data are taken from two waves of a larger data collection for the project "Youth in Balance", and was collected in the autumn of 2005 (N = 1207) and 2008 (N = 632). A total of 1839 students (889 girls and 950 boys) from 12 schools in Kristiansand took part. A bias-corrected bootstrapping technique was used to examine indirect effects. Results revealed that cardiovascular endurance, lower-body strength/power, and upper-body strength stood out as unique mediators in the relationship between physical activity and athletic competence in both genders. Furthermore, there was an indirect effect of physical activity on physical appearance through physical strength/power and flexibility in males. No indirect effects of physical activity on physical appearance through actual physical fitness indices were detected in females.

Physics and Physics Education at Clarion University

Science.gov (United States)

Aravind, Vasudeva

Clarion University is located in the rolling hills of western Pennsylvania. We are a primarily undergraduate public institution serving about 6000 students. We graduate students who take different career paths, one of them being teaching physics at high schools. Since educating teachers of tomorrow requires us to introduce currently trending, research proven pedagogical methods, we incorporate several aspects of physics pedagogies such as peer instruction, flipped classroom and hands on experimentation in a studio physics lab format. In this talk, I discuss some of our projects on physics education, and seek to find potential collaborators interested in working along similar lines.

Reactors physics. Bases of nuclear physics

International Nuclear Information System (INIS)

Diop, Ch.M.

2006-01-01

The aim of nuclear reactor physics is to quantify the relevant macroscopic data for the characterization of the neutronic state of a reactor core and to evaluate the effects of radiations (neutrons and gamma radiations) on organic matter and on inorganic materials. This first article presents the bases of nuclear physics in the context of nuclear reactors: 1 - reactor physics and nuclear physics; 2 - atomic nucleus - basic definitions: nucleus constituents, dimensions and mass of the atomic nucleus, mass defect, binding energy and stability of the nucleus, strong interaction, nuclear momentums of nucleons and nucleus; 3 - nucleus stability and radioactivity: equation of evolution with time - radioactive decay law; alpha decay, stability limit of spontaneous fission, beta decay, electronic capture, gamma emission, internal conversion, radioactivity, two-body problem and notion of radioactive equilibrium. (J.S.)

Sustaining Physics Teacher Education Coalition programs in physics teacher education

Directory of Open Access Journals (Sweden)

Rachel E. Scherr

2017-02-01

Full Text Available Understanding the mechanisms of increasing the number of physics teachers educated per year at institutions with thriving physics teacher preparation programs may inspire and support other institutions in building thriving programs of their own. The Physics Teacher Education Coalition (PhysTEC, led by the American Physical Society (APS and the American Association of Physics Teachers (AAPT, has supported transformation of physics teacher preparation programs at a number of institutions around the country for over a decade. In 2012–2013, PhysTEC supported an independent study on the sustainability of its sites after project funding ends. The study sought to measure the extent to which programs have been sustained and to identify what features should be prioritized for building sustainable physics teacher preparation programs. Most of the studied sites have sustained increases in the number of physics teachers educated per year as well as funding for physics teacher preparation. About half of the programs are thriving, in that in the post-award period, they have further increased both the number of physics teachers educated per year and funding for physics teacher preparation. All studied sites that sustained increases in the number of physics teachers educated per year have two features in common: a champion of physics teacher education and institutional commitment. The thriving physics teacher preparation programs in this study implemented different elements of physics teacher preparation according to diverse local priorities and opportunities, including the unique expertise of local personnel.

A physical tool for severe accident mitigation studies

Energy Technology Data Exchange (ETDEWEB)

Marie, N., E-mail: nathalie.marie@cea.fr [CEA, DEN, DER, F-13108 Saint Paul Lez Durance (France); Bachrata, A. [CEA, DEN, DER, F-13108 Saint Paul Lez Durance (France); Seiler, J.M. [CEA, DEN, DTN, F-38054 Grenoble (France); Barjot, F. [EDF R& D, SINETICS, F-93141 Clamart (France); Marrel, A. [CEA, DEN, DER, F-13108 Saint Paul Lez Durance (France); Gossé, S. [CEA, DEN, DPC, F-91191 Gif Sur Yvette (France); Bertrand, F. [CEA, DEN, DER, F-13108 Saint Paul Lez Durance (France)

2016-12-01

Highlights: • Physical tool for mitigation studies devoted to SFR safety. • Physical models to describe the material discharge from core. • Comparison to SIMMER III results. • Studies for ASTRID safety assessment and support to core design. - Abstract: Within the framework of the Generation IV Sodium-cooled Fast Reactors (SFR) R&D program of CEA, the core behavior in case of severe accidents is being assessed. Such transients are usually simulated with mechanistic codes (such as SIMMER-III). As a complement to this code, which gives reference accidental transient, a physico-statistical approach is currently followed; its final objective being to derive the variability of the main results of interest for the safety. This approach involves a fast-running simulation of extended accident sequences coupling low-dimensional physical models to advanced statistical analysis techniques. In this context, this paper presents such a low-dimensional physical tool (models and simulation results) dedicated to molten core materials discharge. This 0D tool handles heat transfers from molten (possibly boiling) pools, fuel crust evolution, phase separation/mixing of fuel/steel pools, radial thermal erosion of mitigation tubes, discharge of core materials and associated axial thermal erosion of mitigation tubes. All modules are coupled with a global neutronic evolution model of the degraded core. This physical tool is used to study and to define mitigation features (function of tubes devoted to mitigation inside the core, impact of absorbers falling into the degraded core…) to avoid energetic core recriticality during a secondary phase of a potential severe accident. In the future, this physical tool, associated to statistical treatments of the effect of uncertainties would enable sensitivity analysis studies. This physical tool is described before presenting its comparison against SIMMER-III code results, including a space-and energy-dependent neutron transport kinetic

XXI and XXII SERC Main School in Theoretical High Energy Physics

CERN Document Server

Sivakumar, M; Surveys in theoretical high energy physics 2 : lecture notes from SERC Schools

2016-01-01

The book presents pedagogical reviews of important topics on high energy physics to the students and researchers in particle physics. The book also discusses topics on the Quark–Gluon plasma, thermal field theory, perturbative quantum chromodynamics, anomalies and cosmology. Students of particle physics need to be well-equipped with basic understanding of many concepts underlying the standard models of particle physics and cosmology. This is particularly true today when experimental results from colliders, such as large hadron collider (LHC) and relativistic heavy ion collider (RHIC), as well as inferences from cosmological observations, are expected to further expand our understanding of particle physics at high energies. This volume is the second in the Surveys in Theoretical High Energy Physics Series (SThEP). Topics covered in this book are based on lectures delivered at the SERC Schools in Theoretical High Energy Physics at the Physical Research Laboratory, Ahmedabad, and the University of Hyderabad.

The effectiveness of worksite physical activity programs on physical activity, physical fitness, and health

NARCIS (Netherlands)

Proper, K.I.; Koning, M.; Beek, A.J. van der; Hildebrandt, V.H.; Bosscher, R.J.; Mechelen, W. van

2003-01-01

Objective: To critically review the literature with respect to the effectiveness of worksite physical activity programs on physical activity, physical fitness, and health. Data Sources: A search for relevant English-written papers published between 1980 and 2000 was conducted using MEDLINE, EMBASE,

Particle physics

CERN Document Server

Martin, Brian R

2017-01-01

An accessible and carefully structured introduction to Particle Physics, including important coverage of the Higgs Boson and recent progress in neutrino physics. Fourth edition of this successful title in the Manchester Physics series. Includes information on recent key discoveries including : An account of the discovery of exotic hadrons, beyond the simple quark model; Expanded treatments of neutrino physics and CP violation in B-decays; An updated account of ‘physics beyond the standard model’, including the interaction of particle physics with cosmology; Additional problems in all chapters, with solutions to selected problems available on the book’s website; Advanced material appears in optional starred sections.

The Elusive Nature of Entropy and Its Physical Meaning

Directory of Open Access Journals (Sweden)

Milivoje M. Kostic

2014-02-01

Full Text Available Entropy is the most used and often abused concept in science, but also in philosophy and society. Further confusions are produced by some attempts to generalize entropy with similar but not the same concepts in other disciplines. The physical meaning of phenomenological, thermodynamic entropy is reasoned and elaborated by generalizing Clausius definition with inclusion of generated heat, since it is irrelevant if entropy is changed due to reversible heat transfer or irreversible heat generation. Irreversible, caloric heat transfer is introduced as complementing reversible heat transfer. It is also reasoned and thus proven why entropy cannot be destroyed but is always generated (and thus over-all increased locally and globally, at every space and time scales, without any exception. It is concluded that entropy is a thermal displacement (dynamic thermal-volume of thermal energy due to absolute temperature as a thermal potential (dQ = TdS, and thus associated with thermal heat and absolute temperature, i.e., distribution of thermal energy within thermal micro-particles in space. Entropy is an integral measure of (random thermal energy redistribution (due to heat transfer and/or irreversible heat generation within a material system structure in space, per absolute temperature level: dS = dQSys/T = mCSysdT/T, thus logarithmic integral function, with J/K unit. It may be also expressed as a measure of “thermal disorder”, being related to logarithm of number of all thermal, dynamic microstates W (their position and momenta, S = kBlnW, or to the sum of their logarithmic probabilities S = −kB∑pilnpi, that correspond to, or are consistent with the given thermodynamic macro-state. The number of thermal microstates W, is correlated with macro-properties temperature T and volume V for ideal gases. A system form and/or functional order or disorder are not (thermal energy order/disorder and the former is not related to Thermodynamic entropy. Expanding

Physics through the 1990s: condensed-matter physics

International Nuclear Information System (INIS)

1986-01-01

The volume presents the current status of condensed-matter physics from developments since the 1970s to opportunities in the 1990s. Topics include electronic structure, vibrational properties, critical phenomena and phase transitions, magnetism, semiconductors, defects and diffusion, surfaces and interfaces, low-temperature physics, liquid-state physics, polymers, nonlinear dynamics, instabilities, and chaos. Appendices cover the connections between condensed-matter physics and applications of national interest, new experimental techniques and materials, laser spectroscopy, and national facilities for condensed-matter physics research. The needs of the research community regarding support for individual researchers and for national facilities are presented, as are recommendations for improved government-academic-industrial relations

Cosmoparticle physics

CERN Document Server

Khlopov, M Yu

1999-01-01

Since the 1980s the cross-disciplinary, multidimensional field of links between cosmology and particle physics has been widely recognised by theorists, studying cosmology, particle and nuclear physics, gravity, as well as by astrophysicists, astronomers, space physicists, experimental particle and nuclear physicists, mathematicians and engineers.The relationship between cosmology and particle physics is now one of the important topics of discussion at any scientific meeting both on astrophysics and high energy physics.Cosmoparticle physics is the result of the mutual relationship between cosmo

Physical protection

International Nuclear Information System (INIS)

Myers, D.A.

1989-01-01

Physical protection is defined and its function in relation to other functions of a State System of Accounting for and Control of Nuclear Materials is described. The need for a uniform minimum international standard for physical protection as well as the need for international cooperation in physical protection is emphasized. The IAEA's INFCIRC/225/Rev. 1 (Annex 1) is reviewed. The Convention on the Physical Protection of Nuclear Material (Annex 2) is discussed. Photographs show examples of typical physical protection technology (Annex 3)

PHYSICS

CERN Multimedia

Submitted by

Physics Week: plenary meeting on physics groups plans for startup (14–15 May 2008) The Physics Objects (POG) and Physics Analysis (PAG) Groups presented their latest developments at the plenary meeting during the Physics Week. In the presentations particular attention was given to startup plans and readiness for data-taking. Many results based on the recent cosmic run were shown. A special Workshop on SUSY, described in a separate section, took place the day before the plenary. At the meeting, we had also two special DPG presentations on “Tracker and Muon alignment with CRAFT” (Ernesto Migliore) and “Calorimeter studies with CRAFT” (Chiara Rovelli). We had also a report from Offline (Andrea Rizzi) and Computing (Markus Klute) on the San Diego Workshop, described elsewhere in this bulletin. Tracking group (Boris Mangano). The level of sophistication of the tracking software increased significantly over the last few months: V0 (K0 and Λ) reconstr...

PHYSICS

CERN Multimedia

Joe Incandela

There have been two plenary physics meetings since the December CMS week. The year started with two workshops, one on the measurements of the Standard Model necessary for “discovery physics” as well as one on the Physics Analysis Toolkit (PAT). Meanwhile the tail of the “2007 analyses” is going through the last steps of approval. It is expected that by the end of January all analyses will have converted to using the data from CSA07 – which include the effects of miscalibration and misalignment. January Physics Days The first Physics Days of 2008 took place on January 22-24. The first two days were devoted to comprehensive re¬ports from the Detector Performance Groups (DPG) and Physics Objects Groups (POG) on their planning and readiness for early data-taking followed by approvals of several recent studies. Highlights of POG presentations are included below while the activities of the DPGs are covered elsewhere in this bulletin. January 24th was devo...

Medical physics: past, present and future

International Nuclear Information System (INIS)

Kostylev, V.A.

2000-01-01

History of the medical physics is briefly described, assessment of its present status in the world and in Russia is performed, its prospects are discussed. It was shown that the first period of interrelation of medicine and physics (18-19 centuries) was characterized by active study of mechanical, thermal physical, electrical, optical, acoustic phenomena in human body and by creation of corresponding devices. The second period (the end of 19 - the middle of 20 century) is connected with the discoveries of X-rays and radioactivity, development of the theory of atomic structure, atomic nuclei, electromagnetic radiations. The second half of the 20 century is notable for the development and wide practical application of radionuclide gamma apparatuses, electron and proton accelerators, radiodiagnostic gamma cameras, X-ray computerized tomographs, single photon emission radionuclide tomographs, magnetic resonance tomographs, magnetotherapy, laser, ultrasonic and other techniques and devices. It is marked that in future the efficiency and quality of medicophysical technologies will advance [ru

A Multi-Physics simulation of the Reactor Core using CUPID/MASTER

International Nuclear Information System (INIS)

Lee, Jae Ryong; Cho, Hyoung Kyu; Yoon, Han Young; Cho, Jin Young; Jeong, Jae Jun

2011-01-01

KAERI has been developing a component-scale thermal hydraulics code, CUPID. The aim of the code is for multi-dimensional, multi-physics and multi-scale thermal hydraulics analysis. In our previous papers, the CUPID code has proved to be able to reproduce multidimensional thermal hydraulic analysis by validated with various conceptual problems and experimental data. For the numerical closure, it adopts a three dimensional, transient, two-phase and three-field model, and includes physical models and correlations of the interfacial mass, momentum, and energy transfer. For the multi-scale analysis, the CUPID is on progress to merge into system-scale thermal hydraulic code, MARS. In the present paper, a multi-physics simulation was performed by coupling the CUPID with three dimensional neutron kinetics code, MASTER. The MASTER is merged into the CUPID as a dynamic link library (DLL). The APR1400 reactor core during control rod drop/ejection accident was simulated as an example by adopting a porous media approach to employ fuel assembly. The following sections present the numerical modeling for the reactor core, coupling of the kinetics code, and the simulation results

Laser thermal effect on silicon nitride ceramic based on thermo-chemical reaction with temperature-dependent thermo-physical parameters

International Nuclear Information System (INIS)

Pan, A.F.; Wang, W.J.; Mei, X.S.; Wang, K.D.; Zhao, W.Q.; Li, T.Q.

2016-01-01

Highlights: • A two-dimensional thermo-chemical reaction model is creatively built. • Thermal conductivity and heat capacity of β-Si_3N_4 are computed accurately. • The appropriate thermo-chemical reaction rate is fitted and reaction element length is set to assure the constringency. • The deepest ablated position was not the center of the ablated area due to plasma absorption. • The simulation results demonstrate the thermo-chemical process cant be simplified to be physical phase transition. - Abstract: In this study, a two-dimensional thermo-chemical reaction model with temperature-dependent thermo-physical parameters on Si_3N_4 with 10 ns laser was developed to investigate the ablated size, volume and surface morphology after single pulse. For model parameters, thermal conductivity and heat capacity of β-Si_3N_4 were obtained from first-principles calculations. Thermal-chemical reaction rate was fitted by collision theory, and then, reaction element length was deduced using the relationship between reaction rate and temperature distribution. Furthermore, plasma absorption related to energy loss was approximated as a function of electron concentration in Si_3N_4. It turned out that theoretical ablated volume and radius increased and then remained constant with increasing laser energy, and the maximum ablated depth was not in the center of the ablated zone. Moreover, the surface maximum temperature of Si_3N_4 was verified to be above 3000 K within pulse duration, and it was much higher than its thermal decomposition temperature of 1800 K, which indicated that Si_3N_4 was not ablated directly above the thermal decomposition temperature. Meanwhile, the single pulse ablation of Si_3N_4 was performed at different powers using a TEM_0_0 10 ns pulse Nd:YAG laser to validate the model. The model showed a satisfactory consistence between the experimental data and numerical predictions, presenting a new modeling technology that may significantly increase the

Multidimensional Physical Self-Concept of Athletes with Physical Disabilities

Science.gov (United States)

Shapiro, Deborah R.; Martin, Jeffrey J.

2010-01-01

The purposes of this investigation were first to predict reported PA (physical activity) behavior and self-esteem using a multidimensional physical self-concept model and second to describe perceptions of multidimensional physical self-concept (e.g., strength, endurance, sport competence) among athletes with physical disabilities. Athletes (N =…

Overview. Department of Environmental and Radiation Transport Physics. Section 6

Energy Technology Data Exchange (ETDEWEB)

Loskiewicz, J. [Institute of Nuclear Physics, Cracow (Poland)

1995-12-31

Research activities in the Department of Environmental and Radiation Transport Physics are carried out by three Laboratories: Laboratory of Environmental Physics, Laboratory of Neutron Transport Physics and Laboratory of Physics and Modeling of Radiation Transport. The researches provided in 1994 cover: tracer transport and flows in porous media, studies on pollution in atmospheric air, physics of molecular phenomena in chromatographic detectors, studies on neutron transport in heterogenous media, studies on evaluation of neutron cross-section in the thermal region, studies on theory and utilization of neural network in data evaluation, numerical modelling of particle cascades for particle accelerator shielding purpose. In this section the description of mentioned activities as well as the information about personnel employed in the Department, papers and reports published in 1994, contribution to conferences and grants is also given.

Overview. Department of Environmental and Radiation Transport Physics. Section 6

Energy Technology Data Exchange (ETDEWEB)

Loskiewicz, J [Institute of Nuclear Physics, Cracow (Poland)

1996-12-31

Research activities in the Department of Environmental and Radiation Transport Physics are carried out by three Laboratories: Laboratory of Environmental Physics, Laboratory of Neutron Transport Physics and Laboratory of Physics and Modeling of Radiation Transport. The researches provided in 1994 cover: tracer transport and flows in porous media, studies on pollution in atmospheric air, physics of molecular phenomena in chromatographic detectors, studies on neutron transport in heterogenous media, studies on evaluation of neutron cross-section in the thermal region, studies on theory and utilization of neural network in data evaluation, numerical modelling of particle cascades for particle accelerator shielding purpose. In this section the description of mentioned activities as well as the information about personnel employed in the Department, papers and reports published in 1994, contribution to conferences and grants is also given.

Microstructural, thermal, physical and mechanical behavior of the self compacting concrete containing SiO2 nanoparticles

International Nuclear Information System (INIS)

Nazari, Ali; Riahi, Shadi

2010-01-01

Research highlights: → TiO 2 nanoparticles effects on flexural strength of self compacting concrete. → Physical and microstructural consideration. → Mechanical tests. → Thermal analysis. → Porosimetry. - Abstract: In the present study, flexural strength, thermal properties and microstructure of self compacting concrete with different amount of SiO 2 nanoparticles has been investigated. SiO 2 nanoparticles with the average particle size of 15 nm were partially added to self compacting concrete and various behaviors of the specimens have been measured. The results indicate that SiO 2 nanoparticles are able to improve the flexural strength of self compacting concrete and recover the negative effects of superplasticizer on flexural strength of the specimens. SiO 2 nanoparticle as a partial replacement of cement up to 4 wt% could accelerate C-S-H gel formation as a result of the increased crystalline Ca(OH) 2 amount at the early ages of hydration. The increased the SiO 2 nanoparticles' content more than 4 wt%, causes the reduced the flexural strength because of unsuitable dispersion of nanoparticles in the concrete matrix. Accelerated peak appearance in conduction calorimetry tests, more weight loss in thermogravimetric analysis and more rapid appearance of peaks related to hydrated products in X-ray diffraction results, all also indicate that SiO 2 nanoparticles up to 4 wt% could improve the mechanical and physical properties of the specimens. Finally, SiO 2 nanoparticles could improve the pore structure of concrete and shift the distributed pores to harmless and few-harm pores.

Sustaining Physics Teacher Education Coalition programs in physics teacher education

OpenAIRE

Rachel E. Scherr; Monica Plisch; Renee Michelle Goertzen

2017-01-01

Understanding the mechanisms of increasing the number of physics teachers educated per year at institutions with thriving physics teacher preparation programs may inspire and support other institutions in building thriving programs of their own. The Physics Teacher Education Coalition (PhysTEC), led by the American Physical Society (APS) and the American Association of Physics Teachers (AAPT), has supported transformation of physics teacher preparation programs at a number of institutions aro...

pedometer-measured physical activity, self-reported physical activity

African Journals Online (AJOL)

between self-reported and pedometer-measured physical activity was also determined. Results. Average ... Methods. This was a cross-sectional study among employed South African adults. Participant ... acquired information on physical activity habits. Questions ..... How many days of monitoring predict physical activity and ...

Predicting Physics Achievement: Attitude towards Physics, Self-Efficacy of Learning Physics, and Mathematics Achievement

Science.gov (United States)

Kapucu, Serkan

2017-01-01

This study aims to explore the relationships among Turkish high school students' attitude towards physics, self-efficacy of learning physics, mathematics achievement, and physics achievement. To investigate the relationships, a unique questionnaire that identifies the attitude, self-efficacy and achievements were delivered to a total of 301 high…

Connecting Symbolic Integrals to Physical Meaning in Introductory Physics

Science.gov (United States)

Amos, Nathaniel R.

This dissertation presents a series of studies pertaining to introductory physics students' abilities to derive physical meaning from symbolic integrals (e.g., the integral of vdt) and their components, namely differentials and differential products (e.g., dt and vdt, respectively). Our studies focus on physical meaning in the form of interpretations (e.g., "the total displacement of an object") and units (e.g., "meters"). Our first pair of studies independently attempted to identify introductory-level mechanics students' common conceptual difficulties with and unproductive interpretations of physics integrals and their components, as well as to estimate the frequencies of these difficulties. Our results confirmed some previously-observed incorrect interpretations, such as the notion that differentials are physically meaningless; however, we also uncovered two new conceptualizations of differentials, the "rate" (differentials are "rates" or "derivatives") and "instantaneous value" (differentials are values of physical variables "at an instant") interpretations, which were exhibited by more than half of our participants at least once. Our next study used linear regression analysis to estimate the strengths of the inter-connections between the abilities to derive physical meaning from each of differentials, differential products, and integrals in both first- and second-semester, calculus-based introductory physics. As part of this study, we also developed a highly reliable, multiple choice assessment designed to measure students' abilities to connect symbolic differentials, differential products, and integrals with their physical interpretations and units. Findings from this study were consistent with statistical mediation via differential products. In particular, students' abilities to extract physical meaning from differentials were seen to be strongly related to their abilities to derive physical meaning from differential products, and similarly differential

Expectations Regarding Aging, Physical Activity, and Physical Function in Older Adults

Science.gov (United States)

Breda, Aili I.; Watts, Amber S.

2017-01-01

Objective: The present study examined how expectations regarding aging (ERA) influence physical activity participation and physical function. Method: We surveyed 148 older adults about their ERA (ERA-38), health-promoting lifestyles (HPLP-II), and self-rated health (RAND-36). We tested the mediating effect of physical activity on the relationships between ERA and physical function. Results: Positive expectations were associated with more engagement in physical activity (B = 0.016, p physical function (B = 0.521, p Physical activity mediated the relationship between ERA and physical function (B = 5.890, p physically active lifestyles in older adults and may influence health outcomes, such as physical function. Future research should evaluate whether attempts to increase physical activity are more successful when modifications to ERA are also targeted. PMID:28491915

Game physics

CERN Document Server

Eberly, David H

2010-01-01

""Game Physics, 2nd Edition"" provides clear descriptions of the mathematics and algorithms needed to create a powerful physics engine - while providing a solid reference for all of the math you will encounter anywhere in game development: quaternions, linear algebra, and calculus. Implementing physical simulations for real-time games is a complex task that requires a solid understanding of a wide range of concepts from the fields of mathematics and physics. Previously, the relevant information could only be gleaned through obscure research papers. Thanks to ""Game Physics"", all this informa

Understanding physics

CERN Document Server

Mansfield, Michael

2011-01-01

Understanding Physics - Second edition is a comprehensive, yet compact, introductory physics textbook aimed at physics undergraduates and also at engineers and other scientists taking a general physics course. Written with today's students in mind, this text covers the core material required by an introductory course in a clear and refreshing way. A second colour is used throughout to enhance learning and understanding. Each topic is introduced from first principles so that the text is suitable for students without a prior background in physics. At the same time the book is designed to enable

Fusion Plasma Physics and ITER - An Introduction (2/4)

CERN Multimedia

CERN. Geneva

2011-01-01

The second lecture will explore some of the key physics phenomena which govern the behaviour of magnetic fusion plasmas and which have been the subject of intense research during the past 50 years: plasma confinement, magnetohydrodynamic stability and plasma-wall interactions encompass the major areas of plasma physics which must be understood to assemble an overall description of fusion plasma behaviour. In addition, as fusion plasmas approach the “burning plasma” regime, where internal heating due to fusion products dominates other forms of heating, the physics of the interaction between the α-particles produced by D-T fusion reactions and the thermal “background” plasma becomes significant. This lecture will also introduce the basic physics of fusion plasma production, plasma heating and current drive, and plasma measurements (“diagnostics”).

Physical Environment Correlates of Physical Activity in Developing Countries: A Review.

Science.gov (United States)

Day, Kristen

2018-04-01

Noncommunicable diseases and obesity are considered problems of wealthy, developed countries. These conditions are rising dramatically in developing countries. Most existing research on the role of the physical environment to support physical activity examines developed countries only. This review identifies physical environment factors that are associated with physical activity in developing countries. This review is modeled on a highly cited review by Saelens and Handy in 2008. The current review analyzes findings from 159 empirical studies in the 138 developing countries. Results discuss the association of physical environment features and physical activity for all developing countries and identify the patterns within regions. The review supports the association of traffic safety with physical activity for transportation. Rural (vs urban) residence, distance to nonresidential land uses, and "composite" features of the physical environment are associated with general physical activity. Rural (vs urban) residence is associated with physical activity for work. More research is needed on associations between the physical environment and physical activity in developing countries. Research should identify specific physical environment features in urban areas that are associated with higher activity levels.

Physical literacy

OpenAIRE

Roučka, Ladislav

2013-01-01

Topic: Physical literacy Goals: The aproximation of physical literacy, collection and evaluation questionnaires of physical literacy knowledge and students anamnesis. Description of applicants progress in the specific movement skills. Method: Unified questionnaires was used for obtaining informations. We make video for movement analysis. Results: The results didn't obtain our expectation that students are able to express precisely the content of physical literacy by specific skills. However, ...

PHYSICS

CERN Multimedia

J. Incandela

The all-plenary format of the CMS week in Cyprus gave the opportunity to the conveners of the physics groups to present the plans of each physics analysis group for tackling early physics analyses. The presentations were complete, so all are encouraged to browse through them on the Web. There is a wealth of information on what is going on, by whom and on what basis and priority. The CMS week was followed by two CMS “physics events”, the ICHEP08 days and the physics days in July. These were two weeks dedicated to either the approval of all the results that would be presented at ICHEP08, or to the review of all the other Monte-Carlo based analyses that were carried out in the context of our preparations for analysis with the early LHC data (the so-called “2008 analyses”). All this was planned in the context of the beginning of a ramp down of these Monte Carlo efforts, in anticipation of data.  The ICHEP days are described below (agenda and talks at: http://indic...

Sports physical

Science.gov (United States)

... page: //medlineplus.gov/ency/patientinstructions/000673.htm Sports physical To use the sharing features on this page, ... routine checkups. Why do you Need a Sports Physical? The sports physical is done to: Find out ...

Quantization of non-Hamiltonian physical systems

International Nuclear Information System (INIS)

Bolivar, A.O.

1998-09-01

We propose a general method of quantization of non-Hamiltonian physical systems. Applying it, for example, to a dissipative system coupled to a thermal reservoir described by the Fokker-Planck equation, we are able to obtain the Caldeira-Leggett master equation, the non-linear Schroedinger-Langevin equation and Caldirola-Kanai equation (with an additional term), as particular cases. (author)

Physical Allergy

Science.gov (United States)

... Autologous Stem Cell Transplant Additional Content Medical News Physical Allergy By Peter J. Delves, PhD, Professor of ... Disorders Exercise-Induced Allergic Reactions Food Allergy Mastocytosis Physical Allergy Seasonal Allergies Year-Round Allergies A physical ...

Physics Survey Overview

International Nuclear Information System (INIS)

2002-01-01

An overview of a series of assignments of the branches of physics carried out by the Board on Physics and Astronomy of the National Research Council. It identifies further theories in physics and makes recommendations on preventive priorities. The Board on Physics and Astronomy (BPA) has conducted a new decadal survey of physics entitled ''Physics in a New Era''. The survey includes assessments of the main branches of physics as well as certain selected emerging areas. The various elements of the survey were prepared by separately-appointed National Research Council (NRC) committees. The BPA formed the Physics Survey Overview Committee (PSOVC) to complete the survey by preparing an overview of the field of physics to summarize and synthesize the results of the various assessments and to address cross-cutting issues that concern physics as a whole

Section for nuclear physics and energy physics - Annual report

International Nuclear Information System (INIS)

1991-04-01

The report summarizes the research and development activities of the Section for nuclear physics and energy physics at the University of Oslo in 1990. It includes experimental and theoretical nuclear physics, as well as other fields of physics in which members of the section have participated. The report describes completed projects and work currently in progress. The experimental activities in nuclear physics have, as in the previous years, mainly been centered around the cyclotron laboratory with the SCANDITRONIX MC-35 cyclotron. Using the CACTUS multidetector system, several experiments in collaboration with the nuclear physics group at the University of Bergen have been completed. Some results have been published and were also presented at the international conference in Oak Ridge, USA, while more data remains to be analyzed

The relationship between physical activity and physical self-esteem in adolescents: The role of physical fitness indices

OpenAIRE

Haugen, Tommy; Ommundsen, Yngvar; Seiler, Stephen

2013-01-01

Publised version of an article from the journal: Pediatric Exercise Science. Also available from Human Kinetics: http://journals.humankinetics.com/pes-back-issues/pes-volume-25-issue-1-february/the-relationship-between-physical-activity-and-physical-self-esteem-in-adolescents-the-role-of-physical-fitness-indices The aim of this study was to investigate if physical fitness (strength/power, endurance, flexibility and coordination) mediates the cross-sectional relationship between physical ac...

Review on Synthesis, Thermo-Physical Property, and Heat Transfer Mechanism of Nanofluids

Directory of Open Access Journals (Sweden)

Mahesh Suresh Patil

2016-10-01

Full Text Available Nanofluids are suspended nano-sized particles in a base fluid. With increasing demand for more high efficiency thermal systems, nanofluids seem to be a promising option for researchers. As a result, numerous investigations have been undertaken to understand the behaviors of nanofluids. Since their discovery, the thermo-physical properties of nanofluids have been under intense research. Inadequate understanding of the mechanisms involved in the heat transfer of nanofluids has been the major obstacle for the development of sophisticated nanofluids with the desired properties. In this comprehensive review paper, investigations on synthesis, thermo-physical properties, and heat transfer mechanisms of nanofluids have been reviewed and presented. Results show that the thermal conductivity of nanofluids increases with the increase of the operating temperature. This can potentially be used for the efficiency enhancement of thermal systems under higher operating temperatures. In addition, this paper also provides details concerning dependency of the thermo-physical properties as well as synthesis and the heat transfer mechanism of the nanofluids.

Progress report, Physics Division: 1982 October 1 - December 31

International Nuclear Information System (INIS)

1983-02-01

Research activities in nuclear physics included use of a new transient field apparatus to measure spin rotation in Yb-162, study of the interference effect in thermal neutron radiative capture reaction in C-12, and analysis of the results of photo-fission measurements on U-238. In accelerator and applied physics, work has continued on the heavy-ion superconducting cyclotron and the electron test accelerator, and on the development of a high current proton accelerator. Data was compiled on thermal neutron cross sections of the elements and measurements were made of total neutron yields from (p,xn) reactions on Cu, Fe and Th targets. Investigations in solid state physics included neutron scattering studies of red blood cells and CsCoBr 3 , magnetic and phonon properties of USn 3 , and positron annihilation measurements on FeAl. In applied mathematics and computation, work was carried out on coolant boiling and heat transfer in Slowpoke-III, and the MARC code was applied to analysis of pump seal deformations and to temperature distribution around cracks in Bruce pressure tubes

Sports Physicals

Science.gov (United States)

... Staying Safe Videos for Educators Search English Español Sports Physicals KidsHealth / For Teens / Sports Physicals What's in ... beginning of your sports season. What Is a Sports Physical? In the sports medicine field, the sports ...

Physical self-concept and physical fitness in elderly individuals.

Science.gov (United States)

Amesberger, G; Finkenzeller, T; Würth, S; Müller, E

2011-08-01

This investigation examined the relations between physical self-concept and physical fitness (endurance, balance, muscle strength, muscle power) for gaining knowledge about the interrelationship between subjective ratings and objective fitness scores in the elderly in three steps: (1) detecting correlations and changes in time, (2) clarifying the influence of gender, and (3) of a skiing intervention lasting 12 weeks. Physical self-concept was assessed using a modified version of the Physical Self-Concepts (PSK) scales (Stiller et al., 2004) reflecting three first-order factors (endurance, strength, general sportiness) and one second-order factor (global fitness). Objective fitness scores were obtained by VO(2 max), counter movement jump, concentric muscle strength, and static balance. The results reveal that elderly individuals' global physical self and general sportiness are mainly linked to VO(2 max) and concentric muscle strength. Global physical self is predicted by VO(2 max) in females and by physical strength (concentric muscle strength) in males, indicating gender differences. Over time, correlations between subjective ratings and objective fitness scores become stronger in the sense of convergent validity in the skiing intervention group, whereas convergent and divergent validity cannot be supported by data of the control group. In sum, physical self-concept is an important factor in the context of physical intervention programs in the elderly. © 2011 John Wiley & Sons A/S.

Dilution physics modeling: Dissolution/precipitation chemistry

International Nuclear Information System (INIS)

Onishi, Y.; Reid, H.C.; Trent, D.S.

1995-09-01

This report documents progress made to date on integrating dilution/precipitation chemistry and new physical models into the TEMPEST thermal-hydraulics computer code. Implementation of dissolution/precipitation chemistry models is necessary for predicting nonhomogeneous, time-dependent, physical/chemical behavior of tank wastes with and without a variety of possible engineered remediation and mitigation activities. Such behavior includes chemical reactions, gas retention, solids resuspension, solids dissolution and generation, solids settling/rising, and convective motion of physical and chemical species. Thus this model development is important from the standpoint of predicting the consequences of various engineered activities, such as mitigation by dilution, retrieval, or pretreatment, that can affect safe operations. The integration of a dissolution/precipitation chemistry module allows the various phase species concentrations to enter into the physical calculations that affect the TEMPEST hydrodynamic flow calculations. The yield strength model of non-Newtonian sludge correlates yield to a power function of solids concentration. Likewise, shear stress is concentration-dependent, and the dissolution/precipitation chemistry calculations develop the species concentration evolution that produces fluid flow resistance changes. Dilution of waste with pure water, molar concentrations of sodium hydroxide, and other chemical streams can be analyzed for the reactive species changes and hydrodynamic flow characteristics

Outside-school physical activity participation and motivation in physical education.

Science.gov (United States)

Shen, Bo

2014-03-01

Experience in non-school contexts can shape and reshape students' motivation and mediate their learning in school. Outside-school physical activity may provide students with an extensive cognitive and affective foundation and influence their motivation in physical education. Although a trans-contextual effect of physical education has been explored, very little empirical research has examined the impact from outside-school context to physical education. Using self-determination theory and a hierarchical model of motivation, this study was designed to examine the association between participation in organized outside-school physical activity programmes and self-determination process in physical education. Participants included 545 9th graders (305 males and 240 females, age range = 14-16 years, mean age = 14.66 years) enrolled in required physical education classes in three suburban high schools in a large Midwest metropolitan area in the United States. Self-determination variables were measured using relevant instruments, and information on organized outside-school physical activity experiences was gathered in a survey. Structural equation modelling analyses were conducted. Students who participated in organized outside-school physical activity programmes displayed overall higher motivation; however, the strength of associations among the self-determination variables (i.e., pathways from perceived autonomy support to relatedness, from autonomy to competence, and from self-determined motivation to in-class physical activity engagement) was stronger for their non-participant counterparts. There are dynamic relationships between participation in organized outside-school physical activity programmes and self-determination process in physical education. Physical educators need to identify, appreciate, and instructionally address individual students' differences during teaching and learning. © 2012 The British Psychological Society.

Section for nuclear physics and energy physics - Annual Report

International Nuclear Information System (INIS)

1992-04-01

This annual report summarizes the research and development activities of the Section for Nuclear Physics and Energy Physics at the University of Oslo in 1991. It includes experimental and theoretical nuclear physics, as well as other fields of physics in which members of the section have participated. The report describes completed projects and work currently in progress. As in previous years, the experimental activities in nuclear physics have mainly been centered around the Cyclotron Laboratory with the SCANDITRONIX MC-35 Cyclotron. Using the CACTUS multidetector system, several experiments have been completed. Some results have been published while more data remains to be analyzed

Section for nuclear physics and energy physics - Annual report

International Nuclear Information System (INIS)

1992-04-01

This annual report summarizes the research and development activities of the Section for Nuclear Physics and Energy Physics at the University of Oslo in 1992. It includes experimental and theoretical nuclear physics, as well as other fields of physics in which members of the section have participated. The report describes completed projects and work currently in progress. As in previous years, the experimental activities in nuclear physics have mainly been centered around the Cyclotron Laboratory with the SCANDITRONIX MC-35 Cyclotron. Using the CACTUS multidetector system, several experiments have been completed. Some results have been published while more data remains to be analyzed

Increasing Physical Activity during the School Day through Physical Activity Classes: Implications for Physical Educators

Science.gov (United States)

Adkins, Megan; Bice, Matt; Bartee, Todd; Heelan, Kate

2015-01-01

Across the nation schools are adopting health and wellness policies, specifically physical activity (PA) initiatives that aid healthy long-term lifestyles. Interest has been generated about the inclusion of physical activity classes to complement existing physical education classes. Furthermore, discussion has evolved as to if additional…

Determination of first year students’ physical condition and physical fitness level

Directory of Open Access Journals (Sweden)

V.G. Fotynyuk

2017-06-01

Full Text Available Purpose: to study and find out first year students’ physical condition and physical fitness levels. Material: In the research first year students (n=86 participated. The age of the participants was 16 - 19 years. They passed the following tests for physical fitness: 100 meters’ run; run during 12 minutes; long jump from the spot; chin ups; torso rising from lying to sitting position during 1 minute; forward torso bending from sitting position, cm. Results: it was found that 41% of students have low and below average levels of physical condition and 76.35% - the same physical fitness level (unsatisfactory. So we came to conclusion that it was necessary to review the existing approaches to physical education system. It is recommended to increase the volume of compulsory classes of students’ motor functioning at the cost of the following: usage of optional classes; physical exercises’ practicing in free time; everyday motor activity in the form of morning exercises and sport games. Conclusions: the main reasons of students’ physical condition and physical fitness weakening during their studying are: restricted quantity of academic physical education classes; absence of students’ demand in systemic physical exercises’ practicing; students’ low motivation for physical education; absence of interest in physical exercises’ practicing in free time; students’ health worsening before entering higher educational establishment; imperfectness of school physical education.

Physics through the 1990s: Atomic, molecular, and optical physics

International Nuclear Information System (INIS)

1986-01-01

This report was prepared by the Panel on Atomic, Molecular, and Optical Physics of the Physics Survey Committee in response to its charge to describe the field, to characterize the recent advances, and to identify the current frontiers of research. Some of the areas discussed are: atomic structure, atomic dynamics, accelerator-based atomic physics, molecular photoionization and electron-molecule scattering, astrophysics, laser spectroscopy, atmospheric physics, plasma physics, and applications

Physical Activity and Health: The Benefits of Physical Activity

Science.gov (United States)

... State and Local Programs Related Topics Diabetes Nutrition Physical Activity and Health Recommend on Facebook Tweet Share Compartir ... Your Chances of Living Longer The Benefits of Physical Activity Regular physical activity is one of the most ...

Physics of Complex Polymeric Molecules

Science.gov (United States)

Kelly, Joshua Walter

The statistical physics of complex polymers with branches and circuits is the topic of this dissertation. An important motivation are large, single-stranded (ss) RNA molecules. Such molecules form complex ``secondary" and ``tertiary" structures that can be represented as branched polymers with circuits. Such structures are in part directly determined by the nucleotide sequence and in part subject to thermal fluctuations. The polymer physics literature on molecules in this class has mostly focused on randomly branched polymers without circuits while there has been minimal research on polymers with specific structures and on polymers that contain circuits. The dissertation is composed of three parts: Part I studies branched polymers with thermally fluctuating structure confined to a potential well as a simple model for the encapsidation of viral RNA. Excluded volume interactions were ignored. In Part II, I apply Flory theory to the study of the encapsidation of viral ss RNA molecules with specific branched structures, but without circuits, in the presence of excluded volume interaction. In Part III, I expand on Part II and consider complex polymers with specific structure including both branching and circuits. I introduce a method based on the mathematics of Laplacian matrices that allows me to calculate density profiles for such molecules, which was not possible within Flory theory.

The new physics

International Nuclear Information System (INIS)

Davies, P.

1993-01-01

A collection of articles, written by renowned scientists, covering the various fields of the ''new physics'', is presented. The titles are: the new Physics: a synthesis; the renaissance of general relativity; the inflationary universe; the edge of space time; quantum gravity; the new astrophysics; condensed matter physics in less than three dimensions; critical point phenomena: universal physics at large length scales; low temperature physics, superconductivity and superfluidity; quantum optics; physics of far-from-equilibrium systems and self-organization; what is chaos, that we should be mindful of it. Conceptual foundations of quantum mechanics; the quark structure of matter; grand unified theories; effective quantum field theories; gauge theories in particle physics; overview of particle physics

Novel instrument for characterizing comprehensive physical properties under multi-mechanical loads and multi-physical field coupling conditions

Science.gov (United States)

Liu, Changyi; Zhao, Hongwei; Ma, Zhichao; Qiao, Yuansen; Hong, Kun; Ren, Zhuang; Zhang, Jianhai; Pei, Yongmao; Ren, Luquan

2018-02-01

Functional materials represented by ferromagnetics and ferroelectrics are widely used in advanced sensor and precision actuation due to their special characterization under coupling interactions of complex loads and external physical fields. However, the conventional devices for material characterization can only provide a limited type of loads and physical fields and cannot simulate the actual service conditions of materials. A multi-field coupling instrument for characterization has been designed and implemented to overcome this barrier and measure the comprehensive physical properties under complex service conditions. The testing forms include tension, compression, bending, torsion, and fatigue in mechanical loads, as well as different external physical fields, including electric, magnetic, and thermal fields. In order to offer a variety of information to reveal mechanical damage or deformation forms, a series of measurement methods at the microscale are integrated with the instrument including an indentation unit and in situ microimaging module. Finally, several coupling experiments which cover all the loading and measurement functions of the instrument have been implemented. The results illustrate the functions and characteristics of the instrument and then reveal the variety in mechanical and electromagnetic properties of the piezoelectric transducer ceramic, TbDyFe alloy, and carbon fiber reinforced polymer under coupling conditions.

Physical Activity

DEFF Research Database (Denmark)

Andersen, Lars Bo; Anderssen, Sigmund Alfred; Wisløff, Ulrik

2014-01-01

Andersen LB, Anderssen SA, Wisløff U, Hellénius M-L, Fogelholm M, Ekelund U. (Expert Group) Nordic Nutrition Recommendations 2012. Integrating nutrition and physical activity. Chapter: Physical Activity p. 195-217.Nordic Counsil of Ministers.......Andersen LB, Anderssen SA, Wisløff U, Hellénius M-L, Fogelholm M, Ekelund U. (Expert Group) Nordic Nutrition Recommendations 2012. Integrating nutrition and physical activity. Chapter: Physical Activity p. 195-217.Nordic Counsil of Ministers....

Nuclear physics, neutron physics and nuclear energy. Proceedings

International Nuclear Information System (INIS)

Andrejtscheff, W.; Elenkov, D.

1994-01-01

The book contains of proceedings of XI International School on Nuclear Physics, Neutron Physics and Nuclear Energy organized traditionally every two years by Bulgarian Academy of Sciences and the Physics Department of Sofia University held near the city of Varna. It provides a good insight to the large range of theoretical and experimental results, prospects, problems, difficulties and challenges which are at the core of nuclear physics today. The efforts and achievements of scientists to search for new phenomena in nuclei at extreme circumstances as superdeformation and band crossing in nuclear structure understanding are widely covered. From this point of view the achievements and future in the field of high-precision γ-spectroscopy are included. Nuclear structure models and methods, models for strong interaction, particle production and properties, resonance theory and its application in reactor physics are comprised also. (V.T.)

Towards a theory of physics curriculum - teaching physics as a culture

International Nuclear Information System (INIS)

Galili, I.

2005-01-01

Full Text:The crisis in physics education necessitates searching for new meanings of physics knowledge and a new approach to physics curriculum. In our recent study such a new approach was suggested. It renders physics as the dialogue among discipline cultures, rather than as a cluster of disciplines to be an appropriate subject of physics curriculum. This is instead of a regular linear curriculum in which each part ignores, as much it can, its previous and especially future parts. A discipline-culture identifies the elements of knowledge as belonging to either central principles and paradigms nucleus, normal disciplinary knowledge or periphery rival to the nucleus knowledge of the subject. Although physics cannot be represented as a simple wholeness of a single tripartite (triadic) structure (deconstruction of physics), it provides a new vision of physics curriculum representing physics as a culture (the meaning of culture is defined with regard to scientific knowledge). Fundamental physics disciplines are bound together by common epistemology and maintain a conceptual discourse instead of mutual ignoring. Teaching physics as a culture provides a polyphonic space reflecting the actual structure of the modern physics. The new vision of physics curriculum naturally incorporates the studies of students misconceptions in learning physics and elements from the history of science; it suggests new models of individual conceptual change and scientific revolutions. This approach provides a new perception of students typology, instead of the oversimplified (Snows) good and bad in exact sciences. We exemplified this new approach by a new textbook for teaching Optics (and initially proved its effectiveness in terms of physics teaching research

Department of Environmental and Radiation Transport Physics - Overview

International Nuclear Information System (INIS)

Woznicka, U.

2001-01-01

Full text: We deal with environmental physics and the radiation transport physics, both theoretically and experimentally. Some results find their way to practical applications. Our environmental physics research encompasses hydrogeological problems as well as measurements of trace elements in the atmosphere and in the water. Theoretical (analytical and numerical) and experimental issues of the radiation transport and radiation fields are our main field of research. The interest in radiation transport phenomena is stimulated by their importance for the environmental physics, industrial and nuclear facilities and methods of geophysical. Environmental isotopes and noble gases are used in the investigation of water-bearing geological formations in order to determine the origin and age of groundwater. The papers listed below and three ''Reports on research'' present recent achievements in this field. The gas chromatography methods are used for monitoring the anthropogenic trace gases (SF 6 and freons), which participate in the Earth green-house effect. A very high detection level of SF 6 in water, 0.0028 fg/cm 3 H 2 0, has been reached as required for hydrogeological purposes. A preliminary verification of the SF 6 tracer method for dating young groundwaters by the tritium method has been carried out. We carried on the work on a method of radon measurement in soil in connection with geological conditions. The national seminar ''Radon in Environment'' organized at the INP aroused an interest of Polish scientific centres in that field. The seminar gathered 60 participants who presented 24 oral reports and 8 posters. Within the scope of the radiation transport physics we studied thermal neutron transport in finite hydrogenous media. Advantages and limitations of a Monte Carlo code (MCNP) in thermal neutron transport simulations have been examined by both the analytical solution and the experiment on the INP pulsed neutron generator. An interesting contribution to the

The physical world an inspirational tour of fundamental physics

CERN Document Server

Manton, Nicholas

2017-01-01

The Physical World offers a grand vision of the essential unity of physics that will enable the reader to see the world through the eyes of a physicist and understand their thinking. The text follows Einstein's dictum that 'explanations should be made as simple as possible, but no simpler', to give an honest account of how modern physicists understand their subject, including the shortcomings of current theory. The result is an up-to-date and engaging portrait of physics that contains concise derivations of the important results in a style where every step in a derivation is clearly explained, so that anyone with the appropriate mathematical skills will find the text easy to digest. It is over half a century since The Feynman Lectures in Physics were published. A new authoritative account of fundamental physics covering all branches of the subject is now well overdue. The Physical World has been written to satisfy this need. The book concentrates on the conceptual principles of each branch of physics and sho...

Comprehensive School Physical Activity Programs: Recommendations for Physical Education Teacher Education

Science.gov (United States)

Zhang, Xiaoxia; Gu, Xiangli; Zhang, Tao; Keller, Jean; Chen, Senlin

2018-01-01

Comprehensive school physical activity programs (CSPAPs) aim to promote physical activity and healthy lifestyles among school-age children and adolescents. Physical educators are highly qualified individuals taking on the role of certified physical activity leaders. Physical education teacher education (PETE) programs should consider preparing…

Relationship between physical development and physical readiness among skilled wrestlers

Directory of Open Access Journals (Sweden)

Yura Tropin

2018-02-01

Full Text Available Purpose: to determine the relationship between physical development and physical readiness among qualified wrestlers. Material & Methods: in the study involved thirty qualified wrestlers, aged 19–22 years. For the purpose of analyzing indicators of physical development and physical preparedness, pedagogical testing. Results: the results of the study testify to the homogeneity of the indices of physical development of the athletes under study, the coefficient of variation is in the range from 2,43% to 10,93%. It is revealed that the indices of physical readiness of qualified wrestlers are characterized mainly by small variation in the testing of speed-strength qualities, coordination abilities, general and strength endurance, and average – in the results of special endurance. Conclusion: it is determined that the most informative indicators of physical development are the weight of the wrestler's body, which has a connection with 15 physical preparedness tests, followed by a vital index (12 statistically reliable relationships and a strength index (11 interrelations.

Physics gains attraction?

Science.gov (United States)

2000-01-01

A recent report from the American Institute of Physics has indicated that high school enrolments in physics in the USA have reached their highest level since World War II. Figures for the last decade show an increase in the proportion of high school students taking physics from 20 to 28% (800Â 000 students now), according to Physics Today (October 1999, p 68). The report, Maintaining Momentum: High School Physics for a New Millennium , was based on a 1997 survey of high school physics teachers, the fourth such since the mid-1980s. One conclusion drawn by the report's authors was that a broader range of physics courses is now offered, with increased popularity of `conceptual' physics courses using little algebra or trigonometry over the last ten years. The proportion of students with the strongest maths abilities now taking advanced placement or second-year physics has doubled since 1987. In addition the physics appeal has been noted among high school girls, where the percentage taking physics has risen from 39 to 47% in the ten years to 1997. These female students do not, however, seem to extend their studies into advanced placements or even into teaching physics (women constitute just a quarter of high school teachers of the subject). Sadly the good news is outweighed by the fact that physics still registers the lowest enrolments of all the high school sciences - about half those in chemistry for example. Indeed only around 1% of high school students have taken two years of physics before they graduate, which represents a much lower proportion than in many European and Asian countries. The full report can be viewed at the AIP's statistics division's homepage: www.aip.org/statistics/trends/hstrends.htm whilst summaries of the document are available free from the AIP, Education and Employment Statistics Division, One Physics Ellipse, College Park, MD 20740, USA.

Physics Demonstrations

Science.gov (United States)

Bringing Physics Presentations to Students for Presenters Remember why you became a scientist help students develop a deeper understanding of the concepts of force and motion. Physics of Sports Grades 4-12 Fermilab scientists guide a discussion and exploration of the impact physics has in a variety

Let's Make Physical Education More Physical and More Educational

Science.gov (United States)

Duncan, Charles Arthur; Bellar, David M.

2015-01-01

Historically, physical education has a stereotypical image as being neither very physical nor educational. NASPE [National Standards for Physical Education] Standard 2 indicates that students in physical education classes should be able to demonstrate understanding and movement concepts, principles, and tactics as they apply to physical activity.…

Effect of PVA-co-MMA Copolymer on the Physical, Mechanical, and Thermal Properties of Tropical Wood Materials

Directory of Open Access Journals (Sweden)

Md. Saiful Islam

2014-01-01

Full Text Available The present study demonstrates the effect of copolymer on the physical, mechanical, and thermal properties of tropical wood and wood polymer composites (WPCs. Mixed monomers of methyl methacrylate (MMA and polyvinyl alcohol (PVA were effectively impregnated into the cellular structure of several types of tropical wood, which then underwent a catalyst-thermal process to polymerize and form WPC. The manufacturing of WPC was confirmed through Fourier transform infrared (FTIR spectroscopy and scanning electron microscopic (SEM analysis. The SEM observation showed that polymer converted from monomers filled up wood cell cavities and tightly interacted with wood matrix. The X-ray diffraction results reveal that the degree of crystallinity was significantly improved upon impregnation with PVA-co-MMA copolymer. The modulus of elasticity (MOE and compressive modulus were found to be significantly higher after treatment with MMA/PVA indicating improvement of mechanical properties of the wood samples. In addition, the modified WPC had lower water absorption compared to their corresponding raw samples. It is interesting to note that thermogravimetric (TGA analysis shows an extensive improvement in thermal properties of WPC.

Physical modalities in chronic pain management.

Science.gov (United States)

Rakel, Barbara; Barr, John O

2003-09-01

management is of value for all adults and older individuals in particular [79-81]. Historically, physical therapists have been trained to evaluate and treat patients with the range of physical modalities discussed in this article. Although members of the nursing staff traditionally have used some of these modalities (e.g. some forms of heat or cold and massage), increasing numbers of nurses now are being trained to apply more specialized procedures (e.g., TENS). Healthcare professionals must be knowledgeable about the strength of evidence underlying the use of physical modalities for the management of chronic pain. Based on the limited research evidence available (especially related to assistive devices, orthotics, and thermal modalities), it often is difficult to accept or exclude select modalities as having a potential role in chronic pain management for adults and older individuals. Improved research methodologies are needed to address physical modality effectiveness better.

Sustaining Physics Teacher Education Coalition Programs in Physics Teacher Education

Science.gov (United States)

Scherr, Rachel E.; Plisch, Monica; Goertzen, Renee Michelle

2017-01-01

Understanding the mechanisms of increasing the number of physics teachers educated per year at institutions with thriving physics teacher preparation programs may inspire and support other institutions in building thriving programs of their own. The Physics Teacher Education Coalition (PhysTEC), led by the American Physical Society (APS) and the…

Combined effects of post-growth thermal treatment and chemical substitution on physical properties of CaFe₂As₂

Energy Technology Data Exchange (ETDEWEB)

Ran, Sheng [Iowa State Univ., Ames, IA (United States)

2014-12-01

This thesis summarizes experimental work using process of postgrowth thermal treatment and chemical substitution as tuning parameters in the study of physical properties of CaFe₂As₂. Details of sample preparation and characterization are given as well as various phase diagrams.

Physical activity in physiotherapy and physical education high school students

Directory of Open Access Journals (Sweden)

Mihailova A.

2014-01-01

Full Text Available A term of health-related physical fitness became topical with four its components: aerobic and/or cardiovascular fitness, body composition, abdominal muscle strength and endurance, and lower back and hamstring flexibility. Complex evaluation of health-related physical fitness and physical activity (PA may show a wider insight in health promotion and disease prevention. The aim of this study was to evaluate physical activity relation to health-related physical fitness in Physiotherapy (PT and Physical Education (PE students. Final study sample consisted of 67 students (46 women and 21 men (aged 21.61 ± 0.71. All participants filled in International Physical Activity Questionnaire. Health-related physical testing included: 1 body composition evaluation, 2 abdominal muscles strength tests, 3 dynamometry, 4 hamstring muscles and m. quadratus lumborum elasticity evaluation tests, 5 bicycle ergometer test (anaerobic threshold, maximal oxygen consumption. Results showed that most students had normal body composition parameters (BMI, body fat, muscle mass, body water in both genders and study programs. Women were less physically active that men, and PA duration was higher in PE students. PT students had higher body composition values, lower cardiorespiratory fitness parameters and lower handgrip strength in both hands than PE students. Greater PA generally implies a higher level of health-related physical fitness. PA significantly positively affects body composition, upper m. rectus abdominisstrength, grip strength and aerobic capacity.

Physics through the 1990s: Elementary-particle physics

International Nuclear Information System (INIS)

Kirk, W.T.

1986-01-01

This report on elementary-particle physics is part of an overall survey of physics carried out for the National Academy of Sciences by the National Research Council. The panel that wrote this report had three goals. The first goal was to explain the nature of elementary-particle physics and to describe how research is carried out in this field. The second goal was to summarize our present knowledge of the elementary particles and the fundamental forces. The third goal was to consider the future course of elementary-particle physics research and to propose a program for this research in the United States. All of these goals are covered in this report

The "Finding Physics" Project: Recognizing and Exploring Physics outside the Classroom

Science.gov (United States)

Beck, Judith; Perkins, James

2016-01-01

Students in introductory physics classes often have difficulty recognizing the relevance of physics concepts outside the confines of the physics classroom, lab, and textbook. Even though textbooks and instructors often provide examples of physics applications from a wide array of areas, students have difficulty relating physics to their own lives.…

The Physics Force presents The Physics Circus

Science.gov (United States)

Dahlberg, E. Dan

2015-03-01

The Physics Force of the University of Minnesota is an outreach program developed with the goal to show students and the public Science is Fun, Science is Interesting, and Science is Understandable. The program grew from a rather small effort by three high school physics teachers and two University of Minnesota staff members. In the almost three decades since its humble beginnings of 100 attendees in a year, it has grown to an average attendance of over 36,000 annually. In the last three years alone, about 110,000 Minnesotans have seen a performance of The Physics Circus which is roughly 2% of the population of the state. In addition to the performances in Minnesota, The Force performed two years at Disney's Epcot Center, was featured on Newton's Apple, and made appearances on the very successful German TV science show, the Knoff-Hoff Show. I will begin the talk with some of our motivation to develop The Physics Force arising from the current ``scientific state'' of our society and then provide more information on The Force including both some history and examples taken from our Physics Circus.

Let's Get Physical: Teaching Physics Through Gymnastics

Science.gov (United States)

Sojourner, Elena J.; Burgasser, Adam J.; Weise, Eric D.

2018-01-01

The concept of embodied learning—that we can learn with our bodies and with our minds—is a well-established concept in physics and math education research, and includes symbolic understanding (e.g., gestures that track how students think or facilitate learning to model complex systems of energy flow) as well as the literal experience of exploring physical phenomena through body movements. Sport has long served as a guide for both illustrating and experiencing physical concepts and phenomena, with a particularly relevant example being the sport of gymnastics. Here, the practitioner is subjected to a wide range of forces and torques, and experiences translational and rotational motions, all guided by control of body positioning, shape, strength, and leverage. Smith provides a comprehensive study of the mechanics used to analyze gymnastic movements, which includes core concepts such as force balance, leverage and torque, center of mass and stability, moment of inertia, ballistic motion, pendulum motion, and circular motion. For life science majors, gymnastics also provides relevant physical examples of biomechanics and the physical limits of biological materials (skin, bones, ligaments). The popularity of gymnastics—consider the phenomenon of Simone Biles—makes it broadly accessible and engaging, particularly across genders.

IRPhEP-handbook, International Handbook of Evaluated Reactor Physics Benchmark Experiments

International Nuclear Information System (INIS)

Sartori, Enrico; Blair Briggs, J.

2008-01-01

experimental series that were performed at 17 different reactor facilities. The Handbook is organized in a manner that allows easy inclusion of additional evaluations, as they become available. Additional evaluations are in progress and will be added to the handbook periodically. Content: FUND - Fundamental; GCR - Gas Cooled (Thermal) Reactor; HWR - Heavy Water Moderated Reactor; LMFR - Liquid Metal Fast Reactor; LWR - Light Water Moderated Reactor; PWR - Pressurized Water Reactor; VVER - VVER Reactor; Evaluations published as drafts 2 - Related Information: International Criticality Safety Benchmark Evaluation Project (ICSBEP); IRPHE/B and W-SS-LATTICE, Spectral Shift Reactor Lattice Experiments; IRPHE-JAPAN, Reactor Physics Experiments carried out in Japan ; IRPHE/JOYO MK-II, JOYO MK-II core management and characteristics database ; IRPhE/RRR-SEG, Reactor Physics Experiments from Fast-Thermal Coupled Facility; IRPHE-SNEAK, KFK SNEAK Fast Reactor Experiments, Primary Documentation ; IRPhE/STEK, Reactor Physics Experiments from Fast-Thermal Coupled Facility ; IRPHE-ZEBRA, AEEW Fast Reactor Experiments, Primary Documentation ; IRPHE-DRAGON-DPR, OECD High Temperature Reactor Dragon Project, Primary Documents; IRPHE-ARCH-01, Archive of HTR Primary Documents ; IRPHE/AVR, AVR High Temperature Reactor Experience, Archival Documentation ; IRPHE-KNK-II-ARCHIVE, KNK-II fast reactor documents, power history and measured parameters; IRPhE/BERENICE, effective delayed neutron fraction measurements ; IRPhE-TAPIRO-ARCHIVE, fast neutron source reactor primary documents, reactor physics experiments. The International Handbook of Evaluated Reactor Physics Benchmark Experiments was prepared by a working party comprised of experienced reactor physics personnel from Belgium, Brazil, Canada, P.R. of China, Germany, Hungary, Japan, Republic of Korea, Russian Federation, Switzerland, United Kingdom, and the United States of America. The IRPhEP Handbook is available to authorised requesters from the

Physical ergonomics

NARCIS (Netherlands)

Looze, M.P. de; Koningsveld, E.

2013-01-01

Physical ergonomics deals with the physical load on the human body when performing activities like work, sports, jobs at home or dealing with products. With regard to the exposure to physical loads and its potential effects on the human body, the presented framework is helpful. In this article we

Medical physics. The application of physics to medicine

International Nuclear Information System (INIS)

Ka Weibo

2002-01-01

Physics has been applied to medicine for several hundred years, and has greatly spurred the development of medical science. Two important examples are medical imaging and radiation oncology. A review of the state-of-the-art of these two fields is presented for physicists. The combination of physics and medicine has not only provided advanced techniques for clinical diagnosis and treatment but has also advanced physics itself

Quantum physics and statistical physics. 5. ed.

International Nuclear Information System (INIS)

Alonso, Marcelo; Finn, Edward J.

2012-01-01

By logical and uniform presentation this recognized introduction in modern physics treats both the experimental and theoretical aspects. The first part of the book deals with quantum mechanics and their application to atoms, molecules, nuclei, solids, and elementary particles. The statistical physics with classical statistics, thermodynamics, and quantum statistics is theme of the second part. Alsonso and Finn avoid complicated mathematical developments; by numerous sketches and diagrams as well as many problems and examples they make the reader early and above all easily understandably familiar with the formations of concepts of modern physics.

Physical properties of very thin SnS films deposited by thermal evaporation

International Nuclear Information System (INIS)

Cheng Shuying; Conibeer, Gavin

2011-01-01

SnS films with thicknesses of 20–65 nm have been deposited on glass substrates by thermal evaporation. The physical properties of the films were investigated using X-ray diffraction (XRD), scanning electron microscopy, X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and ultraviolet–visible-near infrared spectroscopy at room temperature. The results from XRD, XPS and Raman spectroscopy analyses indicate that the deposited films mainly exhibit SnS phase, but they may contain a tiny amount of Sn 2 S 3 . The deposited SnS films are pinhole free, smooth and strongly adherent to the surfaces of the substrates. The color of the SnS films changes from pale yellow to brown with the increase of the film thickness from 20 nm to 65 nm. The very smooth surfaces of the thin films result in their high reflectance. The direct bandgap of the films is between 2.15 eV and 2.28 eV which is much larger than 1.3 eV of bulk SnS, this is deserving to be investigated further.

Microstructural, thermal, physical and mechanical behavior of the self compacting concrete containing SiO{sub 2} nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Nazari, Ali, E-mail: alinazari84@aut.ac.ir [Department of Technical and Engineering Sciences, Islamic Azad University (Saveh Branch), Saveh (Iran, Islamic Republic of); Riahi, Shadi [Department of Technical and Engineering Sciences, Islamic Azad University (Saveh Branch), Saveh (Iran, Islamic Republic of)

2010-11-15

Research highlights: {yields} TiO{sub 2} nanoparticles effects on flexural strength of self compacting concrete. {yields} Physical and microstructural consideration. {yields} Mechanical tests. {yields} Thermal analysis. {yields} Porosimetry. - Abstract: In the present study, flexural strength, thermal properties and microstructure of self compacting concrete with different amount of SiO{sub 2} nanoparticles has been investigated. SiO{sub 2} nanoparticles with the average particle size of 15 nm were partially added to self compacting concrete and various behaviors of the specimens have been measured. The results indicate that SiO{sub 2} nanoparticles are able to improve the flexural strength of self compacting concrete and recover the negative effects of superplasticizer on flexural strength of the specimens. SiO{sub 2} nanoparticle as a partial replacement of cement up to 4 wt% could accelerate C-S-H gel formation as a result of the increased crystalline Ca(OH){sub 2} amount at the early ages of hydration. The increased the SiO{sub 2} nanoparticles' content more than 4 wt%, causes the reduced the flexural strength because of unsuitable dispersion of nanoparticles in the concrete matrix. Accelerated peak appearance in conduction calorimetry tests, more weight loss in thermogravimetric analysis and more rapid appearance of peaks related to hydrated products in X-ray diffraction results, all also indicate that SiO{sub 2} nanoparticles up to 4 wt% could improve the mechanical and physical properties of the specimens. Finally, SiO{sub 2} nanoparticles could improve the pore structure of concrete and shift the distributed pores to harmless and few-harm pores.

Physical characteristics comparison of virtual wedge device with physical wedge

International Nuclear Information System (INIS)

Cho, Jung Keun; Choi, Kye Sook; Lim, Cheong Hwan; Kim, Jeong Koo; Jung, Hong Ryang; Lee, Jung Ok; Lee, Man Goo

2001-01-01

We compared the characteristics of Siemens virtual wedge device with physical wedges for clinical application. We investigated the characteristics of virtual and physical wedges for various wedge angles (15, 30, 45, and 60) using 6- and 15- MV photon beams. Wedge factors were measured in water using an ion chamber for various field sizes and depths. In case of virtual wedge device, as upper jaw moves during irradiation, wedge angles were estimated by accumulated doses. These measurements were performed at off-axis points perpendicular to the beam central axis in water for a 15 cm x 20 cm radiation field size at the depth of 10 cm. Surface does without and with virtual or physical wedges were measured using a parallel plate ion chamber at surface. Field size was 15 cm * 20 cm and a polystyrene phantom was used. For various field sizes, virtual and physical wedge factors were changed by maximum 2.1% and 3.9%, respectively. For various depths, virtual and physical wedge factors were changed by maximum 1.9% and 2.9%, respectively. No major difference was found between the virtual and physical wedge angles and the difference was within 0.5. Surface dose with physical wedge was reduced by maximum 20% (x-ray beam : 6 MV, wedge angle : 45, SSD : 80 cm) relative to one with virtual wedge or without wedge. Comparison of the characteristics of Siemens virtual wedge device with physical wedges was performed. Depth dependence of virtual wedge factor was smaller than that of physical wedge factor. Virtual and physical wedge factors were nearly independent of field sizes. The accuracy of virtual and physical wedge angles was excellent. Surface dose was found to be reduced using a physical wedge

Physical characteristics comparison of virtual wedge device with physical wedge

International Nuclear Information System (INIS)

Choi, Dong Rak; Shin, Kyung Hwan; Lee, Kyu Chan; Kim, Dae Yong; Ahn, Yong Chan; Lim, Do Hoon; Kim, Moon Kyung; Huh, Seung Jae

1999-01-01

We have compared the characteristics of Siemens virtual wedge device with physical wedges for clinical application. We investigated the characteristics of virtual and physical wedges for various wedge angles (15, 30, 45, and 60 ) using 6- and 15MV photon beams. Wedge factors were measured in water using an ion chamber for various field sizes and depths. In case of virtual wedge device, as upper jaw moves during irradiation, wedge angles were estimated by accumulated doses. These measurements were performed at off-axis points perpendicular to the beam central axis in water for a 15 cm x 20 cm radiation field size at the depth of 10 cm. Surface doses without and with virtual or physical wedges were measured using a parallel plate ion chamber at surface. Field size was 15 cm x 20 cm and a polystyrene phantom was used. For various field sizes, virtual and physical wedge factors were changed by maximum 2.1% and 3.9%, respectively. For various depths, virtual and physical wedge factors were changed by maximum 1.9% and 2.9%, respectively. No major difference was found between the virtual and physical wedge angles and the difference was within 0.5 .deg. . Surface dose with physical wedge was reduced by maximum 20% (x-ray beam: 6 MV, wedge angle: 45 .deg. , SSD: 80cm) relative to one with virtual wedge or without wedge. Comparison of the characteristics of Siemens virtual wedge device with physical wedges was performed. Depth dependence of virtual wedge factor was smaller than that of physical wedge factor. Virtual and physical wedge factors were nearly independent of field sizes. The accuracy of virtual and physical wedge angles was excellent. Surface dose was found to be reduced using physical wedge

Physical Activity Guidelines

Science.gov (United States)

... use this site. health.gov Physical Activity Guidelines Physical Activity Physical activity is key to improving the health of the Nation. Based on the latest science, the Physical Activity Guidelines for Americans is an essential resource for ...

Health-related physical fitness and physical activity in elementary school students.

Science.gov (United States)

Chen, Weiyun; Hammond-Bennett, Austin; Hypnar, Andrew; Mason, Steve

2018-01-30

This study examined associations between students' physical fitness and physical activity (PA), as well as what specific physical fitness components were more significant correlates to being physically active in different settings for boys and girls. A total of 265 fifth-grade students with an average age of 11 voluntarily participated in this study. The students' physical fitness was assessed using four FitnessGram tests, including Progressive Aerobic Cardiovascular Endurance Run (PACER), curl-up, push-up, and trunk lift tests. The students' daily PA was assessed in various settings using a daily PA log for 7 days. Data was analyzed with descriptive statistics, univariate analyses, and multiple R-squared liner regression methods. Performance on the four physical fitness tests was significantly associated with the PA minutes spent in physical education (PE) class and recess for the total sample and for girls, but not for boys. Performance on the four fitness tests was significantly linked to participation in sports/dances outside school and the total weekly PA minutes for the total sample, boys, and girls. Further, boys and girls who were the most physically fit spent significantly more time engaging in sports/dances and had greater total weekly PA than boys and girls who were not physically fit. In addition, the physically fit girls were more physically active in recess than girls who were not physically fit. Overall, students' performance on the four physical fitness tests was significantly associated with them being physically active during PE and in recess and engaging in sports/dances, as well as with their total weekly PA minutes, but not with their participation in non-organized physical play outside school. ClinicalTrials.gov ID: NCT03015337 , registered date: 1/09/2017, as "retrospectively registered".

Meet the Next Generation's Physics Teachers at Physics on Stage

CERN Document Server

2000-01-01

Physics on Stage is an international festival held at CERN where physics teachers from 22 countries will gather to invent new ways of making physics more interesting to students. From 6 to 11 November CERN will be flooded by 450 high school physics teachers from 22 European countries! So don't be surprised if you can't find a place to sit down in the cafeteria! People from Austria, Belgium, Bulgaria, The Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Luxembourg, the Netherlands, Norway, Poland, Portugal, The Slovak Republic, Spain, Sweden, Switzerland and the United Kingdom will come here to show, discuss, and invent new ways of teaching physics and making the subject more interesting for school children and the general public. Indeed the lack of interest in Physics is a worrying concern ­ for example in Germany the number of first year physics students has dropped more than 30 percent in the last ten years! In the UK the number of physics graduates training to be ...

Developing Effective Physical Fitness Testing Standards for Pre Service Physical Educators

Science.gov (United States)

Hill, Kory; Thornburg, Roland

2016-01-01

Physical educators are often held to a higher standard of physical fitness. The ability to effectively convey the importance of physical fitness may depend upon the ability to appear physically fit. The ability to perform at a minimal level of proficiency on fitness tests was deemed important by the faculty of one physical education teacher…

Collider Physics

Indian Academy of Sciences (India)

This is summary of the activities of the working group on collider physics in the IXth Workshop on High Energy Physics Phenomenology (WHEPP-9) held at the Institute of Physics, Bhubaneswar, India in January 2006. Some of the work subsequently done on these problems by the subgroups formed during the workshop is ...

Limit values for exposure to physical agents

International Nuclear Information System (INIS)

Anon.

1983-01-01

The limit values for exposure to thermal environments adopted by the French AFNOR and by the ISO Working Group (AFNOR Standard X 35-201 and ISO Standard 7243, and AFNOR Standard X 35-204). The limit values for exposure to other physical agents established by the American ACGIH for 1982. The following agents are covered: - laser radiation (ocular and skin exposure); - ultraviolet radiation; - visible and near-infrared radiation (retinal thermal and photochemical injury); - airborne and upper sonic and ultrasonic acoustic radiation; - radiofrequency radiation [fr

High Energy Physics

Science.gov (United States)

Untitled Document [Argonne Logo] [DOE Logo] High Energy Physics Home Division ES&H Personnel Collider Physics Cosmic Frontier Cosmic Frontier Theory & Computing Detector R&D Electronic Design Mechanical Design Neutrino Physics Theoretical Physics Seminars HEP Division Seminar HEP Lunch Seminar HEP

PHYSICS

CERN Multimedia

Guenther Dissertori

The time period between the last CMS week and this June was one of intense activity with numerous get-together targeted at addressing specific issues on the road to data-taking. The two series of workshops, namely the “En route to discoveries” series and the “Vertical Integration” meetings continued.   The first meeting of the “En route to discoveries” sequence (end 2007) had covered the measurements of the Standard Model signals as necessary prerequisite to any claim of signals beyond the Standard Model. The second meeting took place during the Feb CMS week and concentrated on the commissioning of the Physics Objects, whereas the third occurred during the April Physics Week – and this time the theme was the strategy for key new physics signatures. Both of these workshops are summarized below. The vertical integration meetings also continued, with two DPG-physics get-togethers on jets and missing ET and on electrons and photons. ...

PHYSICS

CERN Multimedia

D. Acosta

2011-01-01

Since the last CMS Week, all physics groups have been extremely active on analyses based on the full 2010 dataset, with most aiming for a preliminary measurement in time for the winter conferences. Nearly 50 analyses were approved in a “marathon” of approval meetings during the first two weeks of March, and the total number of approved analyses reached 90. The diversity of topics is very broad, including precision QCD, Top, and electroweak measurements, the first observation of single Top production at the LHC, the first limits on Higgs production at the LHC including the di-tau final state, and comprehensive searches for new physics in a wide range of topologies (so far all with null results unfortunately). Most of the results are based on the full 2010 pp data sample, which corresponds to 36 pb-1 at √s = 7 TeV. This report can only give a few of the highlights of a very rich physics program, which is listed below by physics group...

Progress report - physics and health sciences - physics section 1990 January 01 - June 30

International Nuclear Information System (INIS)

Hardy, J.C.

1990-10-01

This is the ninth semi-annual report on the Physics section of Physics and Health Sciences. Major areas of discussion include: nuclear physics, accelerator physics, general physics, neutron's solid state physics, theoretical physics and fusion

A multi-modal training programme to improve physical activity, physical fitness and perceived physical ability in obese children.

Science.gov (United States)

Morano, Milena; Colella, Dario; Rutigliano, Irene; Fiore, Pietro; Pettoello-Mantovani, Massimo; Campanozzi, Angelo

2014-01-01

Actual and perceived physical abilities are important correlates of physical activity (PA) and fitness, but little research has explored these relationships over time in obese children. This study was designed: (a) to assess the feasibility of a multi-modal training programme promoting changes in PA, fundamental motor skills and real and perceived physical abilities of obese children; and (b) to explore cross-sectional and longitudinal relationships between real and perceived physical competence in boys and girls. Forty-one participants (9.2 ± 1.2 years) were assessed before and after an 8-month intervention with respect to body composition, physical fitness, self-reported PA and perceived physical ability. After treatment, obese children reported improvements in the body mass index, PA levels, gross motor performance and actual and perceived physical abilities. Real and perceived physical competence was correlated in boys, but not in girls. Results indicate that a multi-modal programme focused on actual and perceived physical competence as associated with the gradual increase in the volume of activity might be an effective strategy to improve adherence of the participants and to increase the lifelong exercise skills of obese children.

Change in physical education motivation and physical activity behavior during middle school.

Science.gov (United States)

Cox, Anne E; Smith, Alan L; Williams, Lavon

2008-11-01

To test a mediational model of the relationships among motivation-related variables in middle-school physical education and leisure-time physical activity behavior. Sixth- and seventh-grade physical education students from five middle schools in the midwest United States completed a survey containing measures of study variables on two occasions, 1 year apart. Motivation-related constructs positively predicted leisure-time physical activity behavior. Enjoyment of activities in physical education and physical activity during class mediated the relationship between self-determined motivation in physical education and leisure-time physical activity. Perceived competence, autonomy, and relatedness were important antecedent variables in the model, with autonomy and relatedness showing less stability over time and positively predicting self-determined motivation. Students' leisure-time physical activity is linked to motivation-related experiences in physical education. Perceptions of competence, autonomy, and relatedness, self-determined motivation, enjoyment, and physical activity in the physical education setting directly or indirectly predict leisure-time physical activity. The associations suggest that more adaptive motivation corresponds to transfer of behavior across contexts. Also, the findings suggest that the efficacy of school-based physical activity interventions, within and outside of school, is linked to the degree of support for students' self-determined motivation.

Physics and astronomy

CSIR Research Space (South Africa)

Moraal, H

2009-01-01

Full Text Available The chapter is about physics and astronomy. The chapter gives a background about the origins of physics in South Africa. After the CSIR was founded in 1945, physics emerged as a nationwide and unified discipline. The authors show how physics...

Italian Society of Physics

International Nuclear Information System (INIS)

Anon.

1987-01-01

The abstracts of most of the papers read at the 53 National Congress of the Italian Society of Physics are presented. The Congress developed in ten sessions: high energy and elementary particle physics, physics of nuclei, condensed matter, quantum electronics, cosmic physics, geophysics, general physics, electronics and applied physics, health physics and hystory of physics. An author index is also included

The role of applied physics in American introductory physics courses

Science.gov (United States)

Poduska, Ervin L.; Lunetta, Vincent N.

1984-09-01

To what extent should technology and applied physics be included in introductory physics courses? What is the proper balance between pure and applied physics? Should physics teachers devote precious time to socially relevant issues like nuclear power and alternative sources of energy? How much time should be spent, if any, on applications that are more relevant to the student's world like cars, music, television and refrigeration? Does including applications reduce or enhance student understanding of important classical topics? A response to these questions must be based on goals for physics teaching, on knowledge of how students learn and on the nature of the physics discipline. Since there is not enough time to teach everything in an introductory course, priorities must be determined.

Theoretical plasma physics. Final report

International Nuclear Information System (INIS)

Vahala, G.; Tracy, E.

1996-04-01

During the past year, the authors have concentrated on (1) divertor physics, (2) thermo-lattice Boltzmann (TLBE) approach to turbulence, and (3) phase space techniques in gyro-resonance problems in collaboration with Dieter Sigmar (MIT), Sergei Krasheninnikov (MIT), Linda Vahala (ODU), Joseph Morrison (AS and M/NASA-Langley), Pavol Pavlo and Josef Preinhaelter (institute of Plasma Physics, Czech Academy of Sciences) and Allan Kaufman (LBL/U.C.Berkeley). Using a 2-equation compressible closure model with a 2D mean flow, the authors are investigating the effects of 3D neutral turbulence on reducing the heat load to the divertor plate by various toroidal cavity geometries. These studies are being extended to examine 3D mean flows. Thermal Lattice Boltzmann (TLBE) methods are being investigated to handle 3D turbulent flows in nontrivial geometries. It is planned to couple the TLBE collisional regime to the weakly collisional regime and so be able to tackle divertor physics. In the application of phase space techniques to minority-ion RF heating, resonance heating is treated as a multi-stage process. A generalization of the Case-van Kampen analysis is presented for multi-dimensional non-uniform plasmas. Effects such as particle trapping and the ray propagation dynamics in tokamak geometry can now be handled using Weyl calculus

Physical effects of thermonuclear weapons

International Nuclear Information System (INIS)

Rotblat, J.

1984-01-01

The detonation of nuclear weapons gives rise to the following: blast wave; thermal wave; initial radiation (neutrons and gamma-rays); local radioactive fallout; global radioactive fallout; electromagnetic pulse; atmospheric disturbances. Some of these phenomena became known only as a result of the use or testing of bombs and are not as yet fully understood. They produce physical or biological effects or both, almost all of which are directly detrimental to human health. Some are likely to damage the environment

Connecting High School Physics Experiences, Outcome Expectations, Physics Identity, and Physics Career Choice: A Gender Study

Science.gov (United States)

Hazari, Zahra; Sonnert, Gerhard; Sadler, Philip M.; Shanahan, Marie-Claire

2010-01-01

This study explores how students' physics identities are shaped by their experiences in high school physics classes and by their career outcome expectations. The theoretical framework focuses on physics identity and includes the dimensions of student performance, competence, recognition by others, and interest. Drawing data from the Persistence…

Physical, technical and engineer concept of ultradeep nuclear geoprobes

International Nuclear Information System (INIS)

Vaschenko, V.; Vachev, B.; Pisarenko, T.

2009-01-01

This report presents information on the results of works dedicated to theoretical, physical and technical justification of contact thermal melting method of low thermal conductivity substances and to prospects of its practical realization as autonomous geoprobe for penetrating into deep Earth interior. The following problems and tasks were investigated and solved by the authors: 1) Investigation of processes of heat and mass transfer by contact melting in near-bore region due to movement of heat source of arbitrary form. 2) Development of methods and estimate of principal engineer parameters of contact thermal penetrating in low heat conducting environment. 3) Analysis of modern high-temperature materials and element base for construction of autonomous ultra deep thermoprobe. 4) Investigation of ecological consequences of possible emergency in case nuclear thermal heat source loss of sealing. 5) Mathematical problem formulation of ultra deep contact thermal penetrating by melting the environment for heat source of arbitrary form moving under gravity force and propose approach to its solution. 6) Formulation and solution of contact thermal penetration process optimization problem. 7) Development of methods of main engineering parameters of contact thermal melting of low heat conducting substances estimate. 8) Development of base of physical, engineering and technical concept of autonomous geoprobe for ultra deep penetrating into Earth interior. It is important that the results obtained may be used in engineering and constructing development of ultra deep geoprobe and also for calculation of technological apparatus and processes that use contact thermal melting of low thermal conducting materials

Physical, thermal and mechanical study of MPC formulated with LG-MgO incorporating Phase Change Materials as admixture

Science.gov (United States)

Maldonado-Alameda, A.; Lacasta, A. M.; Giro-Paloma, J.; Chimenos, J. M.; Formosa, J.

2017-10-01

The high environmental impact generated by using of Ordinary Portland Cement (OPC) has lead to the search for alternative materials in the field of civil and building engineering. In addition, there is a tendency to develop cements from industrial by-products, thus reducing pollution and emissions generated by their production. One of the best positioned cements to compete with OPC is Magnesium Phosphate Cement (MPC). The present work studies different dosages of MPC mortars formulated with low-grade MgO by-product (sustainable MPC) incorporating Microencapsulated Phase Change Materials (MPCM) and air entraining additive (AEA) as admixtures (Thermal Sustainable MPC) to improve the thermal behaviour of the material. The aim is developed a new eco-friendly material that leads to reducing energy consumption in buildings. The study is focused on the physical, thermal, and mechanical characterization of TS-MPC mortars to assess their potential use as a thermal prefabricated panel. The results allow to relate the amount of the MPCM and the additive percentage with the thermal and mechanical properties of the TS- MPC. Furthermore, is important to highlight the influence of MPCM not only in the thermal behaviour but also on the increase of the porosity. The experimental results show that the addition of both additives contributes substantially to the improvement of the thermal behaviour of the mortars and converts them on a suitable material to reduce thermal oscillations in buildings.

Comparative physical-chemical characterization of encapsulated lipid-based isotretinoin products assessed by particle size distribution and thermal behavior analyses

Energy Technology Data Exchange (ETDEWEB)

Guimaraes, Carla Aiolfi, E-mail: carlaaiolfi@usp.br [Department of Pharmacy, Faculty of Pharmaceutical Sciences, University of Sao Paulo, Sao Paulo, SP 05508-000 (Brazil); Menaa, Farid [Department of Dermatology, School of Medicine Wuerzburg, Wuerzburg 97080 (Germany); Fluorotronics, Inc., 1425 Russ Bvld, San Diego Technology Incubator, San Diego, CA 92101 (United States); Menaa, Bouzid, E-mail: bouzid.menaa@gmail.com [Fluorotronics, Inc., 1425 Russ Bvld, San Diego Technology Incubator, San Diego, CA 92101 (United States); Quenca-Guillen, Joyce S. [Department of Pharmacy, Faculty of Pharmaceutical Sciences, University of Sao Paulo, Sao Paulo, SP 05508-000 (Brazil); Matos, Jivaldo do Rosario [Department of Fundamental Chemistry, Institute of Chemistry, University of Sao Paulo, Sao Paulo, SP 05508-000 (Brazil); Mercuri, Lucildes Pita [Department of Exact and Earth Sciences, Federal University of Sao Paulo, Diadema, SP 09972-270 (Brazil); Braz, Andre Borges [Department of Engineering of Mines and Oil, Polytechnical School, University of Sao Paulo, SP 05508-900 (Brazil); Rossetti, Fabia Cristina [Department of Pharmaceutical Sciences, Faculty of Pharmaceutical Sciences of Ribeirao Preto, University of Sao Paulo, Ribeirao Preto, SP 14015-120 (Brazil); Kedor-Hackmann, Erika Rosa Maria; Santoro, Maria Ines Rocha Miritello [Department of Pharmacy, Faculty of Pharmaceutical Sciences, University of Sao Paulo, Sao Paulo, SP 05508-000 (Brazil)

2010-06-10

Isotretinoin is the drug of choice for the management of severe recalcitrant nodular acne. Nevertheless, some of its physical-chemical properties are still poorly known. Hence, the aim of our study consisted to comparatively evaluate the particle size distribution (PSD) and characterize the thermal behavior of the three encapsulated isotretinoin products in oil suspension (one reference and two generics) commercialized in Brazil. Here, we show that the PSD, estimated by laser diffraction and by polarized light microscopy, differed between the generics and the reference product. However, the thermal behavior of the three products, determined by thermogravimetry (TGA), differential thermal (DTA) analyses and differential scanning calorimetry (DSC), displayed no significant changes and were more thermostable than the isotretinoin standard used as internal control. Thus, our study suggests that PSD analyses in isotretinoin lipid-based formulations should be routinely performed in order to improve their quality and bioavailability.

Astroparticle Physics

CERN Multimedia

CERN. Geneva; J. Carr

2001-01-01

The lectures will introduce the emerging field of Astroparticle Physics which links particle physics and astrophysics. Starting from the Big Bang, the course will describe how particle physics explains certain features of the natural world and the features remainning to be understood. The subjects covered will include dark matter, gamma and neutrino astronomy, cosmic rays and gravity waves.

Physics at FAIR

International Nuclear Information System (INIS)

Chattopadhyay, Subhasis

2014-01-01

The Facility for Antiproton and Ion Research (FAIR) is under construction at Darmstadt, Germany. It will deliver high intensity beams of ions and antiprotons for experiments in the fields of atomic physics, plasma physics, nuclear physics, hadron physics, nuclear matter physics, material physics and biophysics. One of the scientific pillars of FAIR is the Compressed Baryonic Matter (CBM) experiment which is designed for the study of high density nuclear matter as it exists in the core of neutron stars. In this article the scientific program of FAIR will be reviewed with emphasis on the CBM experiment

Physical physics

CERN Document Server

Schulman, Mark

2006-01-01

"Protons, electrons, positrons, quarks, gluons, muons, shmuons! I should have paid better attention to my high scholl physics teacher. If I had, maybe I could have understood even a fration of what Israeli particle physicist Giora Mikenberg was talking about when explaining his work on the world's largest science experiment." (2 pages)

The Association between Belgian Older Adults' Physical Functioning and Physical Activity: What Is the Moderating Role of the Physical Environment?

Science.gov (United States)

Van Holle, Veerle; Van Cauwenberg, Jelle; Gheysen, Freja; Van Dyck, Delfien; Deforche, Benedicte; Van de Weghe, Nico; De Bourdeaudhuij, Ilse

2016-01-01

Better physical functioning in the elderly may be associated with higher physical activity levels. Since older adults spend a substantial part of the day in their residential neighborhood, the neighborhood physical environment may moderate associations between functioning and older adults' physical activity. The present study investigated the moderating role of the objective and perceived physical environment on associations between Belgian older adults' physical functioning and transport walking, recreational walking, and moderate-to-vigorous physical activity. Data from 438 older adults were included. Objective physical functioning was assessed using the Short Physical Performance Battery. Potential moderators included objective neighborhood walkability and perceptions of land use mix diversity, access to recreational facilities, access to services, street connectivity, physical barriers for walking, aesthetics, crime-related safety, traffic speeding-related safety, and walking infrastructure. Transport and recreational walking were self-reported, moderate-to-vigorous physical activity was assessed through accelerometers. Multi-level regression analyses were conducted using MLwiN to examine two-way interactions between functioning and the environment on both walking outcomes. Based on a previous study where environment x neighborhood income associations were found for Belgian older adults' moderate-to-vigorous physical activity, three-way functioning x environment x income interactions were examined for moderate-to-vigorous physical activity. Objectively-measured walkability moderated the association between functioning and transport walking; this positive association was only present in high-walkable neighborhoods. Moreover, a three-way interaction was observed for moderate-to-vigorous physical activity. Only in high-income, high-walkable neighborhoods, there was a positive association between functioning and moderate-to-vigorous physical activity. No

Physical exercise at the workplace reduces perceived physical exertion during healthcare work

DEFF Research Database (Denmark)

Jakobsen, Markus Due; Sundstrup, Emil; Brandt, Mikkel

2015-01-01

BACKGROUND: High physical exertion during work is a risk factor for musculoskeletal pain and long-term sickness absence. Physical exertion (RPE) reflects the balance between physical work demands and physical capacity of the individual. Thus, increasing the physical capacity through physical......: 3.1 on a scale of 0 to 10, average WRPE: 3.6 on a scale of 0 to 10) from 18 departments at three participating hospitals. Participants were randomly allocated at the cluster level to 10 weeks of: (1) workplace physical exercise (WORK) performed in groups during working hours for 5×10 minutes per...... exercise may decrease physical exertion during work. This study investigates the effect of workplace-based versus home-based physical exercise on physical exertion during work (WRPE) among healthcare workers. METHODS: 200 female healthcare workers (age: 42.0, body mass index: 24.1, average pain intensity...

Balanced Physical Exercise Increase Physical Fitness, Optimize Endorphin Levels, and Decrease Malondialdehyde Levels

Directory of Open Access Journals (Sweden)

Erwin Adams Pangkahila

2016-10-01

Full Text Available Background: Physical fitness determines the level of human health. A good physical fitness can be achieved if conducted with a balance and active physical fitness. The aims of this study was to elucidate the effect of balanced physical exercise on physical fitness, endorphin levels, and malondialdehyde (MDA levels. Methods: This study was a true experimental with pretest-posttest control group design using 24 students of IKIP PGRI Denpasar. Selected samples divided into two groups: the control group given conventional physical training (P0 and the treatment group given balanced physical training (P1. Physical fitness tests was performed using Cooper method and blood sampling was done to evaluate the level of endorphins and MDA before (pre test and after (post test treatment of 8 weeks. The data of endorphin and MDA levels were analyzed using independent T test. Whereas, the physical fitness was analyzed using Mann-Whitney U test. Results: Physical fitness of the group given a balanced physical training was significantly higher compare to the group given a conventional physical training (p < 0.05. Balanced physical training was proven to enhance physical fitness as measured by the Cooper method better than conventional physical training. In contrast, the levels of endorphins of the balanced physical training group did not different with the conventional physical training group (p > 0.05. Levels of MDA of balanced physical training group also did not different with the conventional physical training group (p > 0.05. Conclusions: balanced physical training can maintain physical fitness of people and improve the health and quality of life. 

Correlation between some mechanical and physical properties of polycrystalline graphites

International Nuclear Information System (INIS)

Yoda, Shinichi; Fujisaki, Katsuo

1982-01-01

Mechanical and physical properties of polycrystalline graphites, tensile strength, compressive strength, flexural strength, Young's modulus, thermal expansion coefficient, electrical resistivity, volume fraction of porosity, and graphitisation were measured for ten brand graphites. Correlation between the mechanical and physical properties of the graphites were studied. Young's modulus and thermal expansion coefficient of the graphites depend on volume fraction of porosity. The Young's modulus of the graphites tended to increase with increasing the thermal expansion coefficient. For an anisotropic graphite, an interesting relationship between the Young's modulus E and the thermal expansion coefficient al pha was found in any specimen orientations; alpha E=constant. The value of alphah E was dependent upon the volume fraction of porosity. It should be noted here that the electrical resistivity increased with decreasing grain size. The flexural and the compressive strength were related with the volume fraction of porosity while the tensile strength was not, The relationships between the tensile, the compressive and the flexural strength can be approximately expressed as linear functions over a wide range of the stresses. (author)

Philosophy of Physics

Science.gov (United States)

Crease, Robert P.

2017-10-01

There are some physics controversies that no amount of physics research can answer. Why is doing string theory scientific despite its lack of empirical predictions? How should we interpret quantum mechanics? What is the nature of time and space? What constitutes fundamental physics? One can answer these questions dogmatically by appealing to textbooks or by making rough and ready pronouncements, but the issues behind them can often be significantly clarified by the sort of systematic, critical reflection that philosophy practices. Philosophy comes in several traditions. Three of these-known as 'analytic,' 'pragmatic' and 'continental'-have paid particular attention to physics. This ebook illustrates philosophy of physics in action, and how it can help physics, by using four examples from physics to exhibit the aims and value of these philosophical approaches.

Physical Hypermedia: Organising Collections of Mixed Physical and Digital Material

DEFF Research Database (Denmark)

Grønbæk, Kaj; Kristensen, Jannie Friis; Ørbæk, Peter

2003-01-01

This paper introduces the notion of physical hypermedia, addressing the problem of organizing material in mixed digital and physical environments. Based on empirical studies, we propose concepts for collectional actions and meta-data actions, and present prototypes combining principles from...... augmented reality and hypermedia to support organization of mixtures of digital and physical materials. Our prototype of a physical hypermedia system is running on an augmented architect's desk and digital walls utilizing Radio Frequency Identifier (RFID) tags as well as visual tags tracked by cameras....... It allows users to tag physical materials, and have these tracked by readers (antennas) that may become pervasive in our work environments. In the physical hypermedia system, we work with three categories of RFID tags: simple object tags, collectional tags, and tooltags invoking operations such as grouping...

Negotiating a Physical Identity: Girls, Bodies and Physical Education

Science.gov (United States)

Garrett, Robyne

2004-01-01

A physically active lifestyle can be empowering for young women in allowing them to resist many of the dominant and limiting discourses around femininity and gender. In finding pleasure in their physical state a positive sense of self is embodied and long-term engagement in a physical culture can be fostered. However, research repeatedly cites…

The physics companion

CERN Document Server

Fischer-Cripps, Anthony C

2014-01-01

Updated and expanded with new topics, The Physics Companion, 2nd Edition offers a unique and educational approach to learning physics at a level suitable for first-year science students. This new edition expands the presentation to include senior topics, such as statistical mechanics, quantum physics, and nuclear physics.

Applied Physics Education: PER focused on Physics-Intensive Careers

Science.gov (United States)

Zwickl, Benjamin

2017-01-01

Physics education research is moving beyond classroom learning to study the application of physics education within STEM jobs and PhD-level research. Workforce-related PER is vital to supporting physics departments as they educate students for a diverse range of careers. Results from an on-going study involving interviews with entry-level employees, academic researchers, and supervisors in STEM jobs describe the ways that mathematics, physics, and communication are needed for workplace success. Math and physics are often used for solving ill-structured problems that involve data analysis, computational modeling, or hands-on work. Communication and collaboration are utilized in leadership, sales, and as way to transfer information capital throughout the organization through documentation, emails, memos, and face-to-face discussions. While managers and advisors think a physics degree typically establishes technical competency, communication skills are vetted through interviews and developed on the job. Significant learning continues after graduation, showing the importance of cultivating self-directed learning habits and the critical role of employers as educators of specialized technical abilities through on-the-job training. Supported by NSF DGE-1432578.

Preparation and physical properties of vapour-deposited carbon-carbon composites

International Nuclear Information System (INIS)

Loll, Philippe

1976-01-01

In its first part, this research thesis reports a bibliographical study on methods of preparation of various types of vapour-deposited (CVD) carbons, and the author notices that only structure and texture properties of these macroscopically homogeneous pyro-carbons have been studied in detail. For a better understanding of the behaviour of carbon-carbon composites, this thesis thus reports the study of the relationships between physical properties, macroscopic texture and microscopic structure. A densification installation and methods of characterisation have been developed. The fabrication process and its installation are presented (oven with its temperature and gas rate controls, study of its thermal gradient, substrate, heat treatments), and the study and characterisation of carbon-carbon composites are reported: structure and texture properties (studied by optic and scanning electronic microscopy, density measurements, and X-ray diffraction), physical properties (electronic paramagnetic resonance, static magnetism, electric and thermal conductivity). In the last part, the author comments and discusses the obtained results: conditions of preparation, existence, physical properties of the different observed microstructures [fr

Physical fitness and physical behavior in (wheelchair-using) youth with spina bifida

NARCIS (Netherlands)

Bloemen, M.A.T.

2017-01-01

Associations between low physical fitness, unfavorable physical behavior and higher cardiovascular and overall mortality are well known. Children with a physical disability like spina bifida (SB) are at high risk of decreased levels of physical fitness and unfavorable physical behavior. They seem to

Standard Specification for Physical Characteristics of Nonconcentrator Terrestrial Photovoltaic Reference Cells

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 This specification describes the physical requirements for primary and secondary terrestrial nonconcentrator photovoltaic reference cells. A reference cell is defined as a device that meets the requirements of this specification and is calibrated in accordance with Test Method E1125 or Test Method E1362. 1.2 Reference cells are used in the determination of the electrical performance of photovoltaic devices, as stated in Test Methods E948 and E1036. 1.3 Two reference cell physical specifications are described: 1.3.1 Small-Cell Package Design—A small, durable package with a low thermal mass, wide optical field-of-view, and standardized dimensions intended for photovoltaic devices up to 20 by 20 mm, and 1.3.2 Module-Package Design—A package intended to simulate the optical and thermal properties of a photovoltaic module design, but electric connections are made to only one photovoltaic cell in order to eliminate problems with calibrating series and parallel connections of cells. Physical dimensions ...

Economic trends of tokamak power plants independent of physics scaling models

International Nuclear Information System (INIS)

Reid, R.L.; Steiner, D.

1978-01-01

This study examines the effects of plasma radius, field on axis, plasma impurity level, and aspect ratio on power level and unit capital cost, $/kW/sub e/, of tokamak power plants sized independent of plasma physics scaling models. It is noted that tokamaks sized in this manner are thermally unstable based on trapped particle scaling relationships. It is observed that there is an economic advantage for larger power level tokamaks achieved by physics independent sizing; however, the incentive for increased power levels is less than that for fission reactors. It is further observed that the economic advantage of these larger power level tokamaks is decreased when plasma thermal stability measures are incorporated, such as by increasing the plasma impurity concentration. This trend of economy with size obtained by physics independent sizing is opposite to that observed when the tokamak designs are constrained to obey the trapped particle and empirical scaling relationships

Physical Properties of the MER and Beagle II Landing Sites on Mars

Science.gov (United States)

Jakosky, B. M.; Pelkey, S. M.; Mellon, M. T.; Putzig, N.; Martinez-Alonso, S.; Murphy, N.; Hynek, B.

2003-12-01

The ESA Beagle II and the NASA Mars Exploration Rover spacecraft are scheduled to land on the martian surface in December 2003 and January 2004, respectively. Mission operations and success depends on the physical properties of the surfaces on which they land. Surface structural characteristics such as the abundances of loose, unconsolidated fine material, of fine material that has been cemented into a duricrust, and of rocks affect the ability to safely land and to successfully sample and traverse the surface. Also, physical properties affect surface and atmospheric temperatures, which affect lander and rover functionality. We are in the process of analyzing surface temperature information for these sites, derived from MGS TES and Odyssey THEMIS daytime and nighttime measurements. Our approach is to: (i) remap thermal inertia using TES data at ~3-km resolution, to obtain the most complete coverage possible; (ii) interpret physical properties from TES coverage in conjunction with other remote-sensing data sets; (iii) map infrared brightness using daytime and nighttime THEMIS data at 100-m resolution, and do qualitative analysis of physical properties and processes; and (iv) derive thermal inertia from THEMIS nighttime data in conjunction with daytime albedo measurements derived from TES, THEMIS, and MOC observations. In addition, we will use measured temperatures and derived thermal inertia to predict surface temperatures for the periods of the missions.

Effects of vacuum thermal cycling on mechanical and physical properties of high performance carbon/bismaleimide composite

International Nuclear Information System (INIS)

Yu Qi; Chen Ping; Gao Yu; Mu Jujie; Chen Yongwu; Lu Chun; Liu Dong

2011-01-01

Highlights: → The level of cross-links was improved to a certain extent. → The thermal stability was firstly improved and then decreased. → The transverse and longitudinal CTE were both determined by the degree of interfacial debonding. → The mass loss ratio increases firstly and then reaches a plateau value. → The surface morphology was altered and the surface roughness increased firstly and then decreased. → The transverse tensile strength was reduced. → The flexural strength increased firstly and then decreased to a plateau value. → The ILSS increased firstly and then decreased to a plateau value. - Abstract: The aim of this article was to investigate the effects of vacuum thermal cycling on mechanical and physical properties of high performance carbon/bismaleimide (BMI) composites used in aerospace. The changes in dynamic mechanical properties and thermal stability were characterized by dynamic mechanical analysis (DMA) and thermogravimetric analysis (TGA), respectively. The changes in linear coefficient of thermal expansion (CTE) were measured in directions perpendicular and parallel to the fiber direction, respectively. The outgassing behavior of the composites were examined. The evolution of surface morphology and surface roughness were observed by atomic force microscopy (AFM). Changes in mechanical properties including transverse tensile strength, flexural strength and interlaminar shear strength (ILSS) were measured. The results indicated that the vacuum thermal cycling could improve the crosslinking degree and the thermal stability of resin matrix to a certain extent, and induce matrix outgassing and thermal stress, thereby leading to the mass loss and the interfacial debonding of the composite. The degradation in transverse tensile strength was caused by joint effects of the matrix outgassing and the interfacial debonding, while the changes in flexural strength and ILSS were affected by a competing effect between the crosslinking degree

Physical activity in relation to selected physical health components ...

African Journals Online (AJOL)

The aim of this study was to determine the relation between physical activity and selected physical health components. A total of 9860 employees of a financial institution in South Africa, between the ages 18 and 64 (x̄ =35.3 ± 18.6 years), voluntary participated in the study. Health risk factors and physical activity was ...

AGN Accretion Physics in the Time Domain: Survey Cadences, Stochastic Analysis, and Physical Interpretations

Science.gov (United States)

Moreno, Jackeline; Vogeley, Michael S.; Richards, Gordon; O'Brien, John T.; Kasliwal, Vishal

2018-01-01

We present rigorous testing of survey cadences (K2, SDSS, CRTS, & Pan-STARRS) for quasar variability science using a magnetohydrodynamics synthetic lightcurve and the canonical lightcurve from Kepler, Zw 229.15. We explain where the state of the art is in regards to physical interpretations of stochastic models (CARMA) applied to AGN variability. Quasar variability offers a time domain approach of probing accretion physics at the SMBH scale. Evidence shows that the strongest amplitude changes in the brightness of AGN occur on long timescales ranging from months to hundreds of days. These global behaviors can be constrained by survey data despite low sampling resolution. CARMA processes provide a flexible family of models used to interpolate between data points, predict future observations and describe behaviors in a lightcurve. This is accomplished by decomposing a signal into rise and decay timescales, frequencies for cyclic behavior and shock amplitudes. Characteristic timescales may point to length-scales over which a physical process operates such as turbulent eddies, warping or hotspots due to local thermal instabilities. We present the distribution of SDSS Stripe 82 quasars in CARMA parameters space that pass our cadence tests and also explain how the Damped Harmonic Oscillator model, CARMA(2,1), reduces to the Damped Random Walk, CARMA(1,0), given the data in a specific region of the parameter space.

Effect of AgCl NPs: Physical, thermal, absorption and luminescence properties

Science.gov (United States)

Nurhafizah, H.; Rohani, M. S.

2017-06-01

Silver nanoparticles (AgCl NPs) are embedded in Er3+/Nd3+ co-doped lithium niobate tellurite glasses of the form (68-x)TeO2-15Li2CO3-15Nb2O5-1Er2O3-1Nd2O3-(x)AgCl with x = 1,2 and 3 mol% via conventional melt-quenching technique. The physical properties such as density, ionic packing density, refractive index and electronic polarizability are computed utilizing the usual method. The existence of AgCl NPs with an average size of 3.7 nm is confirmed using TEM analysis. Moreover, the thermal stability and Hruby criterion of the glass decreases as the AgCl NPs content increases. The direct optical band gap are found decrease as the AgCl NPs content increase, but both indirect optical band gap and Urbach energy are found increases as AgCl NPs content increases. The luminescence spectra shows two strong emission which is the purple emission at 436 nm and red emission at 724 nm which also been observed has strong quenching due to the AgCl NPs, Er3+/Nd3+ dopant and modifier, lithium niobate which possessed magnetic penetration. These glass compositions may be potential for various applications such as solid state devices including laser.

Quantifying the Interactions Between Soil Thermal Characteristics, Soil Physical Properties, Hydro-geomorphological Conditions and Vegetation Distribution in an Arctic Watershed

Science.gov (United States)

Dafflon, B.; Leger, E.; Robert, Y.; Ulrich, C.; Peterson, J. E.; Soom, F.; Biraud, S.; Tran, A. P.; Hubbard, S. S.

2017-12-01

Improving understanding of Arctic ecosystem functioning and parameterization of process-rich hydro-biogeochemical models require advances in quantifying ecosystem properties, from the bedrock to the top of the canopy. In Arctic regions having significant subsurface heterogeneity, understanding the link between soil physical properties (incl. fraction of soil constituents, bedrock depth, permafrost characteristics), thermal behavior, hydrological conditions and landscape properties is particularly challenging yet is critical for predicting the storage and flux of carbon in a changing climate. This study takes place in Seward Peninsula Watersheds near Nome AK and Council AK, which are characterized by an elevation gradient, shallow bedrock, and discontinuous permafrost. To characterize permafrost distribution where the top of permafrost cannot be easily identified with a tile probe (due to rocky soil and/or large thaw layer thickness), we developed a novel technique using vertically resolved thermistor probes to directly sense the temperature regime at multiple depths and locations. These measurements complement electrical imaging, seismic refraction and point-scale data for identification of the various thermal behavior and soil characteristics. Also, we evaluate linkages between the soil physical-thermal properties and the surface properties (hydrological conditions, geomorphic characteristics and vegetation distribution) using UAV-based aerial imaging. Data integration and analysis is supported by numerical approaches that simulate hydrological and thermal processes. Overall, this study enables the identification of watershed structure and the links between various subsurface and landscape properties in representative Arctic watersheds. Results show very distinct trends in vertically resolved soil temperature profiles and strong lateral variations over tens of meters that are linked to zones with various hydrological conditions, soil properties and vegetation

Quantum Physics

Science.gov (United States)

Le Bellac, Michel

2006-03-01

Quantum physics allows us to understand the nature of the physical phenomena which govern the behavior of solids, semi-conductors, lasers, atoms, nuclei, subnuclear particles and light. In Quantum Physics, Le Bellac provides a thoroughly modern approach to this fundamental theory. Throughout the book, Le Bellac teaches the fundamentals of quantum physics using an original approach which relies primarily on an algebraic treatment and on the systematic use of symmetry principles. In addition to the standard topics such as one-dimensional potentials, angular momentum and scattering theory, the reader is introduced to more recent developments at an early stage. These include a detailed account of entangled states and their applications, the optical Bloch equations, the theory of laser cooling and of magneto-optical traps, vacuum Rabi oscillations, and an introduction to open quantum systems. This is a textbook for a modern course on quantum physics, written for advanced undergraduate and graduate students. Completely original and contemporary approach, using algebra and symmetry principles Introduces recent developments at an early stage, including many topics that cannot be found in standard textbooks. Contains 130 physically relevant exercises

Learning game physics with Bullet Physics and OpenGL

CERN Document Server

Dickinson, Chris

2013-01-01

A comprehensive set of straight-forward, easy-to-follow tutorials in OpenGL and Bullet Physics that will teach you how modern game physics and 3D graphics work.If you're a beginner or intermediate programmer with a basic understanding of 3D mathematics, and you want a stronger foundation in 3D graphics and physics, then this book is perfect for you! You'll even learn some of the fundamental concepts in 3D mathematics and software design that lies beneath them both, discovering some techniques and tricks in graphics and physics that you can use in any game development project.

Physical Activity and Physical Function in Individuals Post-bariatric Surgery

Science.gov (United States)

Josbeno, Deborah A.; Kalarchian, Melissa; Sparto, Patrick J.; Otto, Amy D.; Jakicic, John M.

2016-01-01

Background A better understanding of the physical activity behavior of individuals who undergo bariatric surgery will enable the development of effective post-surgical exercise guidelines and interventions to enhance weight loss outcomes. This study characterized the physical activity profile and physical function of 40 subjects 2–5 years post-bariatric surgery and examined the association between physical activity, physical function, and weight loss after surgery. Methods Moderate-to-vigorous intensity physical activity (MVPA) was assessed with the BodyMedia SenseWear® Pro (SWPro) armband, and physical function (PF) was measured using the physical function subscale of the 36-Item Short Form Health Survey instrument (SF-36PF). Height and weight were measured. Results Percent of excess weight loss (%EWL) was associated with MVPA (r = 0.44, p = 0.01) and PF (r = 0.38, p = 0.02); MVPA was not associated with PF (r = 0.24, p = 0.14). Regression analysis demonstrated that MVPA was associated with %EWL (β = 0.38, t = 2.43, p = 0.02). Subjects who participated in ≥150 min/week of MVPA had a greater %EWL (68.2 ± 19, p = 0.01) than those who participated in activities. However, the lack of an association between PF and MVPA suggests that a higher level of PF does not necessarily correspond to a higher level of MVPA participation. Thus, the barriers to adoption of a more physically active lifestyle may not be fully explained by the subjects’ physical limitations. Further understanding of this relationship is needed for the development of post-surgical weight loss guidelines and interventions. PMID:21153567

Towards an integrated management of health physics and medical physics

International Nuclear Information System (INIS)

Mommaert, Chantal; Rogge, Frank; Cortenbosch, Geert; Schmitz, Frederic

2007-01-01

AVN is a licensed body that performs health physics control in different types of installations, from large nuclear facilities to small dentist cabinets. AVN can also provide medical physics services for the quality control of, for instance, medical devices used in a radiology or nuclear medicine department. Radiation protection for personnel and environment (health physics) and radiation protection for the patient (medical physics) are usually treated separately, using different referential documents, such as the European Directives 96/29/Euratom for health physics and 97/43/Euratom for medical physics. This difference is also clearly reflected in the Belgium legislation (two types of accreditation/licence for inspectors, different chapters in the law,..) From a practical point of view it is sometimes rather difficult to split the task 'on site' during an inspection. An RX system not complying with radiation protection criteria can definitively affect the patient as well as the workers. On the other hand, the hospitals, cannot easily differentiate these two tasks because they are not fully aware of the legislation and they are mixing both. Taking into account the health physics guidelines as well as medical physics guidelines, we have decided to move to an integrated approach of these two concepts. (orig.)

Computational physics

CERN Document Server

Newman, Mark

2013-01-01

A complete introduction to the field of computational physics, with examples and exercises in the Python programming language. Computers play a central role in virtually every major physics discovery today, from astrophysics and particle physics to biophysics and condensed matter. This book explains the fundamentals of computational physics and describes in simple terms the techniques that every physicist should know, such as finite difference methods, numerical quadrature, and the fast Fourier transform. The book offers a complete introduction to the topic at the undergraduate level, and is also suitable for the advanced student or researcher who wants to learn the foundational elements of this important field.

Impurities in chromium deposits produced by electroplating and physical vapor deposition

Energy Technology Data Exchange (ETDEWEB)

Dini, J.W.

1994-05-01

Impurity contents in electrodeposited (hexavalent and trivalent) chromium deposits and physically vapor deposited (thermal evaporation, electron beam evaporation and rf-sputtering) were compared. Oxygen is the key impurity obtained in electrodeposited films but it can be minimized in hexavalent plating solutions by operating at high temperature, e. g., 85 C. Electrodeposits produced in trivalent chromium plating solutions and physically vapor deposited films have much higher oxygen contents than electrodeposits produced in hexavalent chromium solutions operated at temperatures around 85 C. Depending on the target material used for physically vapor deposited films, these films can also have high amounts of other impurities.

Self-concept and physical activity in athletes with physical disabilities.

Science.gov (United States)

Martin, Jeffrey J; Whalen, Laurel

2012-07-01

Few researchers have examined multi-dimensional physical self-concept among athletes with disabilities despite extensive evidence indicating the value of such an approach. To describe multidimensional self-concept and to predict both physical activity (PA) and self-esteem using various dimensions of physical self-concept (e.g., endurance, strength). The study was a one-time cross-sectional design involving self-report questionnaires. Participants (n = 50) were adolescents and adult athletes with physical disabilities (M age = 26.5, SD = 10.1) who completed the short version of the Physical Self-Description Questionnaire (PSDQ-S). Athletes reported neutral to positive perceptions of multidimensional physical self-concept (M's ranging from 3.3 to 5.9 of 6). Using multiple regression analyses, we were able account for 29 and 47 percent of the variance in global self-concept and PA, respectively. Global physical self-concept and strength self-concept were important in predicting global self-concept and PA, respectively. These findings support the promotion of weight training programs specifically and PA programs more generally for people with disabilities. Copyright © 2012 Elsevier Inc. All rights reserved.

The transformation of elementary particle physics into many-body physics

International Nuclear Information System (INIS)

Hove, L. van

1986-01-01

The author illustrates the domains of particle physics where the theoretical problems and methods have much in common with many-body and condensed-matter physics. The multitude of diverse physical systems accessible to experimentation in condensed-matter physics, and the numerous concepts developed for their theoretical understanding provide a rich store of ideas and analogies to the particle physicist. This can help him to overcome the great handicap that in his own discipline the experimental facts are very hard to come by and are often extremely incomplete. On the other hand, particle physics brought us such truly fundamental advances as non-Abelian gauge theories, electroweak unification with the heavy weak bosons, and quantum chromodynamics with the confinement principle for the field quanta. As our understanding of these novel schemes deepens, possibly with further progress toward unification, one can expect that they will slowly have an impact on the rest of physics, just as the concepts and techniques of Abelian field theories have gradually invaded most of condensed-matter physics. (Auth.)

PHYSICS

CERN Multimedia

Chris Hill

2012-01-01

The months that have passed since the last CMS Bulletin have been a very busy and exciting time for CMS physics. We have gone from observing the very first 8TeV collisions produced by the LHC to collecting a dataset of the collisions that already exceeds that recorded in all of 2011. All in just a few months! Meanwhile, the analysis of the 2011 dataset and publication of the subsequent results has continued. These results come from all the PAGs in CMS, including searches for the Higgs boson and other new phenomena, that have set the most stringent limits on an ever increasing number of models of physics beyond the Standard Model including dark matter, Supersymmetry, and TeV-scale gravity scenarios, top-quark physics where CMS has overtaken the Tevatron in the precision of some measurements, and bottom-quark physics where CMS made its first discovery of a new particle, the Ξ*0b baryon (candidate event pictured below). Image 2:  A Ξ*0b candidate event At the same time POGs and PAGs...

Physics

CERN Document Server

Cullen, Katherine

2005-01-01

Defined as the scientific study of matter and energy, physics explains how all matter behaves. Separated into modern and classical physics, the study attracts both experimental and theoretical physicists. From the discovery of the process of nuclear fission to an explanation of the nature of light, from the theory of special relativity to advancements made in particle physics, this volume profiles 10 pioneers who overcame tremendous odds to make significant breakthroughs in this heavily studied branch of science. Each chapter contains relevant information on the scientist''s childhood, research, discoveries, and lasting contributions to the field and concludes with a chronology and a list of print and Internet references specific to that individual.

Head First Physics A learner's companion to mechanics and practical physics (AP Physics B - Advanced Placement)

CERN Document Server

Lang, Heather

2008-01-01

Wouldn't it be great if there were a physics book that showed you how things work instead of telling you how? Finally, with Head First Physics, there is. This comprehensive book takes the stress out of learning mechanics and practical physics by providing a fun and engaging experience, especially for students who "just don't get it." Head First Physics offers a format that's rich in visuals and full of activities, including pictures, illustrations, puzzles, stories, and quizzes -- a mixed-media style proven to stimulate learning and retention. One look will convince you: This isn't mere theo

The physical hydrogeology of ore deposits

Science.gov (United States)

Ingebritsen, Steven E.; Appold, M.S.

2012-01-01

Hydrothermal ore deposits represent a convergence of fluid flow, thermal energy, and solute flux that is hydrogeologically unusual. From the hydrogeologic perspective, hydrothermal ore deposition represents a complex coupled-flow problem—sufficiently complex that physically rigorous description of the coupled thermal (T), hydraulic (H), mechanical (M), and chemical (C) processes (THMC modeling) continues to challenge our computational ability. Though research into these coupled behaviors has found only a limited subset to be quantitatively tractable, it has yielded valuable insights into the workings of hydrothermal systems in a wide range of geologic environments including sedimentary, metamorphic, and magmatic. Examples of these insights include the quantification of likely driving mechanisms, rates and paths of fluid flow, ore-mineral precipitation mechanisms, longevity of hydrothermal systems, mechanisms by which hydrothermal fluids acquire their temperature and composition, and the controlling influence of permeability and other rock properties on hydrothermal fluid behavior. In this communication we review some of the fundamental theory needed to characterize the physical hydrogeology of hydrothermal systems and discuss how this theory has been applied in studies of Mississippi Valley-type, tabular uranium, porphyry, epithermal, and mid-ocean ridge ore-forming systems. A key limitation in the computational state-of-the-art is the inability to describe fluid flow and transport fully in the many ore systems that show evidence of repeated shear or tensional failure with associated dynamic variations in permeability. However, we discuss global-scale compilations that suggest some numerical constraints on both mean and dynamically enhanced crustal permeability. Principles of physical hydrogeology can be powerful tools for investigating hydrothermal ore formation and are becoming increasingly accessible with ongoing advances in modeling software.

High School Physics, Two-Year Colleges, and Physics Majors

Science.gov (United States)

White, Susan C.

2013-01-01

We have just completed the data collection for our 2012-13 Nationwide Survey of High School Physics and expect to have results to report in the spring. In the interim, we will take a look at physics in two-year colleges (TYCs). In 2007, we surveyed undergraduate seniors in degree-granting physics departments, and we asked these students if they…

Can a school physical activity intervention improve physical self-perception and enjoyment?

DEFF Research Database (Denmark)

Lund-Cramer, Pernille; Christiansen, Lars Breum Skov; Smedegaard, Søren

Purpose Physical activity at school can improve mental health of all children – especially if it is targeted to children’s needs and executed in a positive social climate. The purpose of the present study was to examine the effect of a multicomponent school-based physical activity intervention...... activity in recess. Using a cluster-randomized design, 24 Danish schools were randomized to either intervention or control. Study population included 3.136 children aged 10-13 years at baseline. Survey data (socio-demographics, physical activity, self-efficacy, physical enjoyment, physical self...... on physical self-perception and enjoyment of physical activity among children aged 10-13 years. Methods An intervention based on Self-Determination Theory was developed and pilot tested in close co-operation with schools and targeted 1) physical education lessons, 2) in-class activity, and 3) physical...

An Analysis of Metaphors Used by High School Students to Describe Physics, Physics Lesson and Physics Teacher

Science.gov (United States)

Çetin, Ali

2016-01-01

The purpose of this study was to describe high school students' "physics", physics lesson" and "physics teacher" conceptions by using metaphors. 313 students participated in the study from different high school types in Siirt, Turkey. A metaphorical perception form constructed by researcher was individually conducted,…

TU-A-210-01: HIFU Physics and Delivery

Energy Technology Data Exchange (ETDEWEB)

Eames, M. [Focused Ultrasound Foundation (United States)

2015-06-15

High-intensity focused ultrasound (HIFU) has developed rapidly in recent years and is used frequently for clinical treatments in Asia and Europe with increasing clinical use and clinical trial activity in the US, making it an important medical technology with which the medical physics community must become familiar. Akin to medical devices that deliver treatments using ionizing radiation, HIFU relies on emitter geometry to non-invasively form a tight focus that can be used to affect diseased tissue while leaving healthy tissue intact. HIFU is unique in that it does not involve the use of ionizing radiation, it causes thermal necrosis in 100% of the treated tissue volume, and it has an immediate treatment effect. However, because it is an application of ultrasound energy, HIFU interacts strongly with tissue interfaces, which makes treatment planning challenging. In order to appreciate the advantages and disadvantages of HIFU as a thermal therapy, it is important to understand the underlying physics of ultrasound tissue interactions. The first lecture in the session will provide an overview of the physics of ultrasound wave propagation; the mechanism for the accumulation of heat in soft-tissue; image-guidance modalities including temperature monitoring; current clinical applications and commercial devices; active clinical trials; alternate mechanisms of action (future of FUS). The second part of the session will compare HIFU to existing ionization radiation techniques. The difficulties in defining a clear concept of absorbed dose for HIFU will be discussed. Some of the technical challenges that HIFU faces will be described, with an emphasis on how the experience of radiation oncology physicists could benefit the field. Learning Objectives: Describe the basic physics and biology of HIFU, including treatment delivery and image guidance techniques. Summarize existing and emerging clinical applications and manufacturers for HIFU. Understand that thermal ablation with

TU-A-210-01: HIFU Physics and Delivery

International Nuclear Information System (INIS)

Eames, M.

2015-01-01

High-intensity focused ultrasound (HIFU) has developed rapidly in recent years and is used frequently for clinical treatments in Asia and Europe with increasing clinical use and clinical trial activity in the US, making it an important medical technology with which the medical physics community must become familiar. Akin to medical devices that deliver treatments using ionizing radiation, HIFU relies on emitter geometry to non-invasively form a tight focus that can be used to affect diseased tissue while leaving healthy tissue intact. HIFU is unique in that it does not involve the use of ionizing radiation, it causes thermal necrosis in 100% of the treated tissue volume, and it has an immediate treatment effect. However, because it is an application of ultrasound energy, HIFU interacts strongly with tissue interfaces, which makes treatment planning challenging. In order to appreciate the advantages and disadvantages of HIFU as a thermal therapy, it is important to understand the underlying physics of ultrasound tissue interactions. The first lecture in the session will provide an overview of the physics of ultrasound wave propagation; the mechanism for the accumulation of heat in soft-tissue; image-guidance modalities including temperature monitoring; current clinical applications and commercial devices; active clinical trials; alternate mechanisms of action (future of FUS). The second part of the session will compare HIFU to existing ionization radiation techniques. The difficulties in defining a clear concept of absorbed dose for HIFU will be discussed. Some of the technical challenges that HIFU faces will be described, with an emphasis on how the experience of radiation oncology physicists could benefit the field. Learning Objectives: Describe the basic physics and biology of HIFU, including treatment delivery and image guidance techniques. Summarize existing and emerging clinical applications and manufacturers for HIFU. Understand that thermal ablation with

Understanding physics

CERN Document Server

Cassidy, David; Rutherford, James

2002-01-01

Understanding Physics provides a thorough grounding in contemporary physics while placing physics into its social and historical context Based in large part on the highly respected Project Physics Course developed by two of the authors, it also integrates the results of recent pedagogical research The text thus - teaches about the basic phenomena in the physical world and the concepts developed to explain them - shows that science is a rational human endeavor with a long and continuing tradition, involving many different cultures and people - develops facility in critical thinking, reasoned argumentation, evaluation of evidence, mathematical modeling, and ethical values The treatment emphasizes not only what we know but also how we know it, why we believe it, and what effects that knowledge has - Why do we believe the Earth and planets revolve around the Sun? - Why do we believe that matter is made of atoms? - How do relativity theory and quantum mechanics alter our conception of Nature and in what ways do th...

Plasma physics

CERN Document Server

Cairns, R A

1985-01-01

This book is intended as an introduction to plasma physics at a level suitable for advanced undergraduates or beginning postgraduate students in physics, applied mathematics or astrophysics. The main prerequisite is a knowledge of electromagnetism and of the associated mathematics of vector calculus. SI units are used throughout. There is still a tendency amongst some plasma physics researchers to· cling to C.g.S. units, but it is the author's view that universal adoption of SI units, which have been the internationally agreed standard since 1960, is to be encouraged. After a short introductory chapter, the basic properties of a plasma con­ cerning particle orbits, fluid theory, Coulomb collisions and waves are set out in Chapters 2-5, with illustrations drawn from problems in nuclear fusion research and space physics. The emphasis is on the essential physics involved and (he theoretical and mathematical approach has been kept as simple and intuitive as possible. An attempt has been made to draw attention t...

Beyond the Gym: Increasing Outside of School Physical Activity through Physical Education

Science.gov (United States)

Palmer, Stephen; Bycura, Dierdra

2014-01-01

The purpose of physical education is to guide youngsters to become and remain physically active for life. Research on correlates and determinants of physical activity has shown the importance of developing intrinsic motivation in students so that they will choose to be physically active in their leisure time. When the physical education curriculum…

Biochemical degradation and physical migration of polyphenolic compounds in osmotic dehydrated blueberries with pulsed electric field and thermal pretreatments.

Science.gov (United States)

Yu, Yuanshan; Jin, Tony Z; Fan, Xuetong; Wu, Jijun

2018-01-15

Fresh blueberries were pretreated by pulsed electric fields (PEF) or thermal pretreatment and then were subject to osmotic dehydration. The changes in contents of anthocyanins, predominantly phenolic acids and flavonols, total phenolics, polyphenol oxidase (PPO) activity and antioxidant activity in the blueberry samples during pretreatment and osmotic dehydration were investigated. Biochemical degradation and physical migration of these nutritive compounds from fruits to osmotic solutions were observed during the pretreatments and osmotic dehydration. PEF pretreated samples had the least degradation loss but the most migration loss of these compounds compared to thermally pretreated and control samples. Higher rates of water loss and solid gain during osmotic dehydration were also obtained by PEF pretreatment, reducing the dehydration time from 130 to 48h. PEF pretreated and dehydrated fruits showed superior appearance to thermally pretreated and control samples. Therefore, PEF pretreatment is a preferred technology that balances nutritive quality, appearance, and dehydration rate. Published by Elsevier Ltd.

SPORTS PHYSICAL THERAPY CURRICULA IN PHYSICAL THERAPIST PROFESSIONAL DEGREE PROGRAMS.

Science.gov (United States)

Mulligan, Edward P; DeVahl, Julie

2017-10-01

The specialty niche of sports physical therapy has grown at a significant rate over the past 40 years. Despite this growth there is little information or direction from the physical therapy education accreditation body or professional association to guide academic programs on the interest or necessity of this type of practice content in physical therapy professional degree programs. The purpose of this survey study is to report on the prevalence, attitudes, barriers, resources, and faculty expertise in providing required or elective sports physical therapy course work. Cross-sectional descriptive survey. A 57-item questionnaire with branching logic was distributed via a web-based electronic data capture tool to survey all Commission on Accreditation for Physical Therapy Education (CAPTE) accredited and candidate schools in the United States. Response data was analyzed to describe typical educational program profiles, faculty demographics, and correlational factors consistent with the presence or absence of specific sports physical therapy curricular content. Thirty one percent of the schools responded to the survey and the program demographics were consistent with all currently accredited schools in regards to their geography, Carnegie classification, and faculty and student size. Forty three percent of programs offered a required or elective course distinct to the practice of sports physical therapy. Descriptive information regarding the sequencing, curricular make-up, resources, and assessment of content competence is reported. The odds of providing this content nearly doubles for programs that have faculty with sports clinical specialist credentials, accredited sports residency curriculums, or state practice acts that allow sports venue coverage. This survey provides an initial overview of sports physical therapy educational efforts in professional physical therapy degree programs. The data can used to spur further discussion on the necessity, structure, and

Physical Activity Basics

Science.gov (United States)

... Weight Breastfeeding Micronutrient Malnutrition State and Local Programs Physical Activity Basics Recommend on Facebook Tweet Share Compartir How much physical activity do you need? Regular physical activity helps improve ...

Neutrino Oscillation Physics

International Nuclear Information System (INIS)

Kayser, Boris

2014-01-01

To complement the neutrino-physics lectures given at the 2011 International School on Astro Particle Physics devoted to Neutrino Physics and Astrophysics (ISAPP 2011; Varenna, Italy), at the 2011 European School of High Energy Physics (ESHEP 2011; Cheila Gradistei, Romania), and, in modified form, at other summer schools, we present here a written description of the physics of neutrino oscillation. This description is centered on a new way of deriving the oscillation probability. We also provide a brief guide to references relevant to topics other than neutrino oscillation that were covered in the lectures

Nuclear medicine physics

CERN Document Server

De Lima, Joao Jose

2011-01-01

Edited by a renowned international expert in the field, Nuclear Medicine Physics offers an up-to-date, state-of-the-art account of the physics behind the theoretical foundation and applications of nuclear medicine. It covers important physical aspects of the methods and instruments involved in modern nuclear medicine, along with related biological topics. The book first discusses the physics of and machines for producing radioisotopes suitable for use in conventional nuclear medicine and PET. After focusing on positron physics and the applications of positrons in medicine and biology, it descr

Neutrino Oscillation Physics

Energy Technology Data Exchange (ETDEWEB)

Kayser, Boris [Fermilab (United States)

2014-07-01

To complement the neutrino-physics lectures given at the 2011 International School on Astro Particle Physics devoted to Neutrino Physics and Astrophysics (ISAPP 2011; Varenna, Italy), at the 2011 European School of High Energy Physics (ESHEP 2011; Cheila Gradistei, Romania), and, in modified form, at other summer schools, we present here a written description of the physics of neutrino oscillation. This description is centered on a new way of deriving the oscillation probability. We also provide a brief guide to references relevant to topics other than neutrino oscillation that were covered in the lectures.

On the physical basis of a theory of human thermoregulation.

Science.gov (United States)

Iberall, A. S.; Schindler, A. M.

1973-01-01

Theoretical study of the physical factors which are responsible for thermoregulation in nude resting humans in a physical steady state. The behavior of oxidative metabolism, evaporative and convective thermal fluxes, fluid heat transfer, internal and surface temperatures, and evaporative phase transitions is studied by physiological/physical modeling techniques. The modeling is based on the theories that the body has a vital core with autothermoregulation, that the vital core contracts longitudinally, that the temperature of peripheral regions and extremities decreases towards the ambient, and that a significant portion of the evaporative heat may be lost underneath the skin. A theoretical basis is derived for a consistent modeling of steady-state thermoregulation on the basis of these theories.

Physical mathematics

CERN Document Server

Cahill, Kevin

2013-01-01

Unique in its clarity, examples and range, Physical Mathematics explains as simply as possible the mathematics that graduate students and professional physicists need in their courses and research. The author illustrates the mathematics with numerous physical examples drawn from contemporary research. In addition to basic subjects such as linear algebra, Fourier analysis, complex variables, differential equations and Bessel functions, this textbook covers topics such as the singular-value decomposition, Lie algebras, the tensors and forms of general relativity, the central limit theorem and Kolmogorov test of statistics, the Monte Carlo methods of experimental and theoretical physics, the renormalization group of condensed-matter physics and the functional derivatives and Feynman path integrals of quantum field theory.

Theoretical Physics Division

International Nuclear Information System (INIS)

This report is a survey of the studies done in the Theoretical Physics Division of the Nuclear Physics Institute; the subjects studied in theoretical nuclear physics were the few-nucleon problem, nuclear structure, nuclear reactions, weak interactions, intermediate energy and high energy physics. In this last field, the subjects studied were field theory, group theory, symmetry and strong interactions [fr

Effects of Badminton on Physical Developments of Males with Physical Disability

Science.gov (United States)

Yüksel, Mehmet Fatih

2018-01-01

This study was realized in order to determine the features of the male badminton players with physical disability, and to examine the effects of badminton on physical developments of individuals with physical disability. Totally 59 males voluntarily participated in the study, 35 of whom were male badminton players with physical disability (n = 35,…

Engaging Middle School Students in Physical Education and Physical Activity Programs

Science.gov (United States)

Doolittle, Sarah

2016-01-01

With school-based physical activity emerging as a public health issue, it is more important than ever to understand what keeps children and adolescents interested and participating in physical education and physical activity. As the research on physical activity patterns indicates, the middle school years may be a watershed moment in the lives of…

Proceedings of the XXXI International Meeting on Fundamental Physics. B-Physics, Astroparticle Physics and Neutrino Physics. Soto de Cangas, Asturias, spain, 24-28 February, 2003

International Nuclear Information System (INIS)

2004-01-01

The XXXIth International Meeting on Fundamental Physics was held in La Pasera Resort at soto de Cangas (Asturias, Spain) from February 24-28, 2003. The meeting was devoted to experimental and theoretical issues of high energy physics, with special reference to beauty physics, astroparticle and neutrino physics. The major topics, as well as some special talks on Fundamental Physics at Low Energy Experiments and computing for the new era of High Energy Physics Experiments, were developed in a series of course lectures. Short contributions concerning the state of the art in those topics, as well as the last LEP results, and medical applications of the high energy detector developments, were also given. The meeting was sponsored by the Ministerio de Ciencia y Tecnologia, the Consejo Superior de Investigaciones Cientificas, the Universidades de Cantabria y Oviedo, the Principado de Asturias and the Centro de Investigaciones Energeticas, Medioambientales y Tecnologicas. (Author)

Modern introductory physics

CERN Document Server

Holbrow, Charles H; Amato, Joseph C; Galvez, Enrique; Parks, M. Elizabeth

2010-01-01

Modern Introductory Physics, 2nd Edition, by Charles H. Holbrow, James N. Lloyd, Joseph C. Amato, Enrique Galvez, and Beth Parks, is a successful innovative text for teaching introductory college and university physics. It is thematically organized to emphasize the physics that answers the fundamental question: Why do we believe in atoms and their properties?  The book provides a sound introduction to basic physical concepts with particular attention to the nineteenth- and twentieth-century physics underlying our modern ideas of atoms and their structure.  After a review of basic Newtonian mechanics, the book discusses early physical evidence that matter is made of atoms.  With a simple model of the atom Newtonian mechanics can explain the ideal gas laws, temperature, and viscosity.  Basic concepts of electricity and magnetism are introduced along with a more complicated model of the atom to account for the observed electrical properties of atoms. The physics of waves---particularly light and x-rays---an...

Men of physics pioneer in solid state physics

CERN Document Server

Johnson, V A

2013-01-01

Men of Physics: Karl Lark-Horovitz presents the biography of Karl Lark-Horovitz, a physicist who significantly contributed in the then-young field of experimental nuclear physics. This book discusses the Lark-Horovitz important work in structure determination by X-ray and electron diffraction methods. Organized into two parts encompassing 19 chapters, this book begins with an overview of the biographical account of Karl Lark-Horovitz. This text then describes Lark-Horovitz's creation of a highly regarded graduate program in physics at Purdue University, which is a feat involving both the acqui

Validation of the Physical Activity Scale for individuals with physical disabilities.

Science.gov (United States)

van den Berg-Emons, Rita J; L'Ortye, Annemiek A; Buffart, Laurien M; Nieuwenhuijsen, Channah; Nooijen, Carla F; Bergen, Michael P; Stam, Henk J; Bussmann, Johannes B

2011-06-01

To determine the criterion validity of the Physical Activity Scale for Individuals With Physical Disabilities (PASIPD) by means of daily physical activity levels measured by using a validated accelerometry-based activity monitor in a large group of persons with a physical disability. Cross-sectional. Participants' home environment. Ambulatory and nonambulatory persons with cerebral palsy, meningomyelocele, or spinal cord injury (N=124). Not applicable. Self-reported physical activity level measured by using the PASIPD, a 2-day recall questionnaire, was correlated to objectively measured physical activity level measured by using a validated accelerometry-based activity monitor. Significant Spearman correlation coefficients between the PASIPD and activity monitor outcome measures ranged from .22 to .37. The PASIPD overestimated the duration of physical activity measured by using the activity monitor (mean ± SD, 3.9±2.9 vs 1.5±0.9h/d; PPASIPD correlated poorly with objective measurements using an accelerometry-based activity monitor in people with a physical disability. However, similar low correlations between objective and subjective activity measurements have been found in the general population. Users of the PASIPD should be cautious about overestimating physical activity levels. Copyright © 2011 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Attitude Towards Physics and Additional Mathematics Achievement Towards Physics Achievement

Science.gov (United States)

Veloo, Arsaythamby; Nor, Rahimah; Khalid, Rozalina

2015-01-01

The purpose of this research is to identify the difference in students' attitude towards Physics and Additional Mathematics achievement based on gender and relationship between attitudinal variables towards Physics and Additional Mathematics achievement with achievement in Physics. This research focused on six variables, which is attitude towards…

Particle Physics Education Sites

Science.gov (United States)

back to home page Particle Physics Education Sites quick reference Education and Information - National Laboratory Education Programs - Women and Minorities in Physics - Other Physics Sites - Physics Alliance - Accelerators at National Laboratories icon Particle Physics Education and Information sites: top

The "Finding Physics" Project: Recognizing and Exploring Physics Outside the Classroom

Science.gov (United States)

Beck, Judith; Perkins, James

2016-11-01

Students in introductory physics classes often have difficulty recognizing the relevance of physics concepts outside the confines of the physics classroom, lab, and textbook. Even though textbooks and instructors often provide examples of physics applications from a wide array of areas, students have difficulty relating physics to their own lives. Encouraging students to apply physics to their own surroundings helps them develop the critical analysis skills of a scientifically literate and competent citizen. Fink, in his book Creating Significant Learning Experiences, emphasizes the importance of constructing opportunities to help students connect what they learn in their academic courses with past and current life experiences and link them to possible future life experiences. Several excellent papers in this journal have presented labs and activities that address this concern by encouraging teachers to bring real-world examples into the classroom or to take students into the field for data collection and observation. Alternatively, Smith suggests a writing exercise in which his students identify and explain an event in terms of their understanding of physics. In this paper we present a multiphase exercise that challenges students to find their own examples of physics from outside the classroom and analyze them using the conceptual understanding and quantitative skills which they are developing in the classroom. The ultimate goal of the "Finding Physics" project is to improve students' learning through enhancing their recognition that, to quote one participant's end-of-course survey, "Physics is everywhere!"

The European Physical Society Conference on High Energy Physics

Science.gov (United States)

2017-07-01

The European Physical Society Conference on High Energy Physics (EPS- HEP) is one of the major international conferences that review the field. It takes place every other year since 1971. It is organized by the High Energy and Particle Physics Division of the European Physical Society in cooperation with an appointed European Local Institute of Research or an internationally recognized University or Academy Body. EPS-HEP 2017 was held on 5-12 July in Venice, Italy at Palazzo del Cinema and Palazzo del Casinò, located in the Lido island. The conference has been organized by the Istituto Nazionale di Fisica Nucleare (INFN) and by the Department of Physics and Astronomy of the University of Padova. Editorial Board: Paolo Checchia, Mauro Mezzetto, Giuseppina Salente, Michele Doro, Livia Conti, Caterina Braggio, Chiara Sirignano, Andrea Dainese, Martino Margoni, Roberto Rossin, Pierpaolo Mastrolia, Patrizia Azzi, Enrico Conti, Marco Zanetti, Luca Martucci, Sofia Talas Lucano Canton.

Outside-School Physical Activity Participation and Motivation in Physical Education

Science.gov (United States)

Shen, Bo

2014-01-01

Background: Experience in non-school contexts can shape and reshape students' motivation and mediate their learning in school. Outside-school physical activity may provide students with an extensive cognitive and affective foundation and influence their motivation in physical education. Although a trans-contextual effect of physical education has…

The Importance of Physical Literacy for Physical Education and Recreation

Science.gov (United States)

Basoglu, Umut Davut

2018-01-01

As the basis of characteristics, qualifications, behaviors, awareness, knowledge and understanding of the development of healthy active living and physical recreation opportunities Physical Literacy (PL); has become a global concern in the fields of physical education and recreation since its first use as a term. Experts from different countries…

Does HOPSports Promote Youth Physical Activity in Physical Education Classes?

Science.gov (United States)

West, Stephanie T.; Shores, Kindal A.

2014-01-01

This study investigated how a technological intervention, HOPSports (HOPS), impacted youth physical activity (PA) in a physical education (PE) class. Research indicates rising levels of youth television watching and video game use, physical inactivity, and related overweight. One approach to increase youth PA is to use technology-based…

2T-Physics 2001

International Nuclear Information System (INIS)

Bars, I.

2001-01-01

The physics that is traditionally formulated in one-time-physics (1T-physics) can also be formulated in two-time-physics (2T-physics). The physical phenomena in 1T or 2T physics are not different, but the spacetime formalism used to describe them is. The 2T description involves two extra dimensions (one time and one space), is more symmetric, and makes manifest many hidden features of 1T-physics. One such hidden feature is that families of apparently different 1T-dynamical systems in d dimensions holographically describe the same 2T system in d+2 dimensions. In 2T-physics there are two timelike dimensions, but there is also a crucial gauge symmetry that thins out spacetime, thus making 2T-physics effectively equivalent to 1T-physics. The gauge symmetry is also responsible for ensuring causality and unitarity in a spacetime with two timelike dimensions. What is gained through 2T-physics is a unification of diverse 1T dynamics by making manifest hidden symmetries and relationships among them. Such relationships is the evidence for the presence of the higher dimensional spacetime structure. 2T-physics could be viewed as a device for gaining a better understanding of 1T-physics, but beyond this, 2T-physics offers new vistas in the search of the unified theory while raising deep questions about the meaning of spacetime. In these lectures, the recent developments in the powerful gauge field theory formulation of 2T-physics will be described after a brief review of the results obtained so far in the more intuitive worldline approach

2T-Physics 2001

International Nuclear Information System (INIS)

Bars, Itzhak

2002-01-01

The physics that is traditionally formulated in one-time-physics (1T-physics) can also be formulated in two-time-physics (2T-physics). The physical phenomena in 1T or 2T physics are not different, but the spacetime formalism used to describe them is. The 2T description involves two extra dimensions (one time and one space), is more symmetric, and makes manifest many hidden features of 1T-physics. One such hidden feature is that families of apparently different 1T-dynamical systems in d dimensions holographically describe the same 2T system in d+2 dimensions. In 2T-physics there are two timelike dimensions, but there is also a crucial gauge symmetry that thins out spacetime, thus making 2T-physics effectively equivalent to 1T-physics. The gauge symmetry is also responsible for ensuring causality and unitarity in a spacetime with two timelike dimensions. What is gained through 2T-physics is a unification of diverse 1T dynamics by making manifest hidden symmetries and relationships among them. Such symmetries and relationships is the evidence for the presence of the underlying higher dimensional spacetime structure. 2T-physics could be viewed as a device for gaining a better understanding of 1T-physics, but beyond this, 2T-physics offers new vistas in the search of the unified theory while raising deep questions about the meaning of spacetime. In these lectures, the recent developments in the gauge field theory formulation of 2T-physics will be described after a brief review of the results obtained so far in the worldline approach

RELATIVISTIC HEAVY ION PHYSICS: A THEORETICAL OVERVIEW.

Energy Technology Data Exchange (ETDEWEB)

KHARZEEV,D.

2004-03-28

This is a mini-review of recent theoretical work in the field of relativistic heavy ion physics. The following topics are discussed initial conditions and the Color Glass Condensate; approach to thermalization and the hydrodynamic evolution; hard probes and the properties of the Quark-Gluon Plasma. Some of the unsolved problems and potentially promising directions for future research are listed as well.

Mathematics and physics

CERN Document Server

Manin, Yu I

1981-01-01

A bird's eye view of mathematics ; physical quantities, dimensions and constants : the source of numbers in physics ; a drop of milk : observer, observation, observable and unobservable ; space-time as a physical system ; action and symmetry.

XXIII SERC School in Theoretical High Energy Physics (SERC THEP)

CERN Document Server

2013-01-01

The recent discovery at the Large Hadron Collider, of what is very likely the Higgs particle, has given a fillip to research in High Energy physics. These experiments hold the promise of a glimpse of physics beyond the Standard Model, which while having been verified to great accuracy, cannot be the final theory. Uncomfortable gaps -both theoretical and experimental- remain in our understanding. Lecture notes from the SERC School in Theoretical High Energy Physics held at IIT Bombay in February 2008 are contained in this volume. Topics that were covered then are of continuing importance, more so in the light of the ongoing LHC experiment. The various chapters in the book include an extensive survey of LHC physics that together with formal aspects and models of supersymmetry, review the state of the art in our understanding of the Standard Model and beyond. The article on B Physics and CP violations add to this, while the chapter on thermal field theory reviews the formalism necessary to understand the early u...

Astroparticle physics

CERN Document Server

Grupen, Claus

2005-01-01

The book describes the branch of astrophysics in which processes in the universe are investigated with experimental methods known from particle physics experiments. After a historical introduction to the basics of elementary particles, their interactions and the relevant detection techniques are described. The main body of the book concerns cosmic rays. The modern aspects of astroparticle physics are described in a chapter on cosmology. The book provides an orientation in the field of astroparticle physics that many beginners might look for. The physics issues are presented with little mathematics, and the results are illustrated by many diagrams. The reader has a chance to enter this field of astrophysics with a book that closes the gap between expert and popular level.

Dystonia: Physical Therapy

Science.gov (United States)

... Online Support Frequently Asked Questions Faces of Dystonia Physical Therapy Physical therapy may be an important component of treating ... everyday tasks, Since dystonia is a neurological disorder, physical therapy does not treat the dystonia directly but ...

Physical Activity Assessment

Science.gov (United States)

Current evidence convincingly indicates that physical activity reduces the risk of colon and breast cancer. Physical activity may also reduce risk of prostate cancer. Scientists are also evaluating potential relationships between physical activity and other cancers.

Building physics from physical principles to international standards

CERN Document Server

Pinterić, Marko

2017-01-01

This textbook provides thorough coverage of the most important building physics phenomena: heat transfer, moisture, sound/acoustics, and illumination. Since the book is primarily aimed at engineers, it addresses professional issues with due pragmatism, and by including many practical examples and related ISO standards. Nevertheless, in order to guarantee full comprehension, it also explains the underlying physical principles and relates them to practical aspects in a simple and clear way. This is achieved with the aid of more than 100 figures and consistent cross-referencing of formulas and ideas. In addition, interrelationships between the different building physics phenomena are elucidated in a way that will enable readers to develop performance specifications that inform the design process. The book will primarily appeal to students of civil engineering and architecture, as well as to all practitioners in these areas who wish to broaden their fundamental understanding of topics in building physics.

Sport and Physics

Directory of Open Access Journals (Sweden)

Leopold Mathelitsch

2017-04-01

Full Text Available The combination of sport and physics offers several attractive ingredients for teaching physics, at primary, secondary, as well as university level. These cover topics like interdisciplinary teaching, sports activities as physics experiments, video analysis or modeling. A variety of examples are presented that should act as stimulus, accompanied by a list of references that should support the implementation of sport topics into physics teaching.

Dark matter physics, flavor physics and LHC constraints in the dark matter model with a bottom partner

Energy Technology Data Exchange (ETDEWEB)

Abe, Tomohiro [Institute for Advanced Research, Nagoya University,Nagoya 464-8602 (Japan); Kobayashi-Maskawa Institute for the Origin of Particles and the Universe,Nagoya University, Nagoya 464-8602 (Japan); Kawamura, Junichiro [Department of Physics, Waseda University,Tokyo 169-8555 (Japan); Okawa, Shohei [Department of Physics, Nagoya University,Nagoya 464-8602 (Japan); Omura, Yuji [Kobayashi-Maskawa Institute for the Origin of Particles and the Universe,Nagoya University, Nagoya 464-8602 (Japan)

2017-03-10

In the scenario that dark matter (DM) is a weakly interacting massive particle, there are many possibilities of the interactions with the Standard Model (SM) particles to achieve the relic density of DM. In this paper, we consider a simple DM model where the DM candidate is a complex scalar boson. The model contains a new complex gauge singlet scalar boson and a new fermion whose gauge charge is the same as the right-handed down-type quark. We dub the new fermion the bottom partner. These new particles have Yukawa interactions with the SM down-type quarks. The DM candidate interacts with the SM particles through the Yukawa interactions. The Yukawa interactions are not only relevant to the annihilation process of the DM but also contribute to the flavor physics, such as the ΔF=2 processes. In addition, the flavor alignment of the Yukawa couplings is related to the decay modes of the bottom partner, and thus we can find the explicit correlations among the physical observables in DM physics, flavor physics, and the signals at the LHC. We survey the ΔF=2 processes based on the numerical analyses of the thermal relic density, the direct detection of the DM, and the current LHC bounds. We investigate the perturbative bound on the Yukawa coupling as well. A Study of a fermionic DM model with extra scalar quarks is also given for comparison.

Main physics features driving design concept and physics design constraints

International Nuclear Information System (INIS)

Fujisawa, Noboru; Sugihara, Masayoshi; Yamamoto, Shin

1987-07-01

Major physics design philosophies are described, which are essential bases for a plasma design and may have significant impacts on a reactor design concept. Those design philosophies are classified into two groups, physics design drivers and physics design constraints. The design drivers are featured by the fact that a designer is free to choose and the choice may be guided by his opinion, such as ignition, a pulse length, an operation scenario, etc.. The design constraints may follow a physical law, such as plasma confinement, β-limit, density limit, and so on. (author)

Joint Annual Meeting of the Swiss Physical Society and the Austrian Physical Society

International Nuclear Information System (INIS)

2017-01-01

The meeting was organised - as every two years - as a joint meeting with the Austrian Physical Society ((ÖPG) and the Swiss Society for Astrophysics and Astronomy (SSAA). The Swiss Institute of Particle Physics (CHIPP) participated additionally to their usual 2-year rhythm. We also welcomed for the first time the NCCR MARVEL (Computational Design and Discovery of Novel Materials). They all together guarantee an exciting conference covering physics at its best. This meeting was hosted by CERN, Genève. The plenary sessions gave an overview of the present status of research in molecular spintronics, biophotonic micro manipulation of cells, gravitational waves, spectroscopy of trapped antihydrogen atoms, reflective optical systems for astronomical applications, trapped-ion interfaces for quantum networks and quantum photonics. The topical sessions were dedicated to: Applied Physics and Plasma Physics; Astronomy and Astrophysics; Atomic Physics and Quantum Optics; Biophysics, Medical Physics and Soft Matter; Condensed Matter Physics; Correlated-Electron Physics in Transition-Metal Oxides; Earth, Atmosphere and Environmental Physics; Emergent phenomena in novel low-dimensional materials; History of Physics; Magnetism and Spintronics at the Nanoscale; Nuclear, Particle- and Astrophysics; Physics in Startups; Scientific Opportunities with SwissFEL; Surfaces, Interfaces and Thin Films; Theoretical Physics. Those contributions which are in the INIS subject scope are indexed individually.

Cardiovascular risk profile: cross-sectional analysis of motivational determinants, physical fitness and physical activity.

Science.gov (United States)

Sassen, Barbara; Kok, Gerjo; Schaalma, Herman; Kiers, Henri; Vanhees, Luc

2010-10-07

Cardiovascular risk factors are associated with physical fitness and, to a lesser extent, physical activity. Lifestyle interventions directed at enhancing physical fitness in order to decrease the risk of cardiovascular diseases should be extended. To enable the development of effective lifestyle interventions for people with cardiovascular risk factors, we investigated motivational, social-cognitive determinants derived from the Theory of Planned Behavior (TPB) and other relevant social psychological theories, next to physical activity and physical fitness. In the cross-sectional Utrecht Police Lifestyle Intervention Fitness and Training (UP-LIFT) study, 1298 employees (aged 18 to 62) were asked to complete online questionnaires regarding social-cognitive variables and physical activity. Cardiovascular risk factors and physical fitness (peak VO2) were measured. For people with one or more cardiovascular risk factors (78.7% of the total population), social-cognitive variables accounted for 39% (p < .001) of the variance in the intention to engage in physical activity for 60 minutes every day. Important correlates of intention to engage in physical activity were attitude (beta = .225, p < .001), self-efficacy (beta = .271, p < .001), descriptive norm (beta = .172, p < .001) and barriers (beta = -.169, p < .01). Social-cognitive variables accounted for 52% (p < .001) of the variance in physical active behaviour (being physical active for 60 minutes every day). The intention to engage in physical activity (beta = .469, p < .001) and self-efficacy (beta = .243, p < .001) were, in turn, important correlates of physical active behavior.In addition to the prediction of intention to engage in physical activity and physical active behavior, we explored the impact of the intensity of physical activity. The intensity of physical activity was only significantly related to physical active behavior (beta = .253, p < .01, R2 = .06, p < .001). An important goal of our study was to

Space Matters: Physical-Digital and Physical-Virtual Codesign in inSpace

DEFF Research Database (Denmark)

Reilly, D.; Voida, S.; McKeon, M.

2010-01-01

The physical and social cues on which we rely during collaboration can vanish in the digital realm. inSpace focuses on physical-digital codesign, leveraging an approach grounded in social behavior patterns.......The physical and social cues on which we rely during collaboration can vanish in the digital realm. inSpace focuses on physical-digital codesign, leveraging an approach grounded in social behavior patterns....

Physics News in 1983.

Science.gov (United States)

Schewe, Phillip F., Ed.

Information is provided on some of the interesting and newsworthy developments in physics and its related fields during 1983. Areas considered include: (1) acoustics; (2) astrophysics; (3) condensed matter physics; (4) crystallography; (5) physics education; (6) electron and atomic physics; (7) elementary particle physics; (8) fluid dynamics; (9)…

Semiconductor Physical Electronics

CERN Document Server

Li, Sheng

2006-01-01

Semiconductor Physical Electronics, Second Edition, provides comprehensive coverage of fundamental semiconductor physics that is essential to an understanding of the physical and operational principles of a wide variety of semiconductor electronic and optoelectronic devices. This text presents a unified and balanced treatment of the physics, characterization, and applications of semiconductor materials and devices for physicists and material scientists who need further exposure to semiconductor and photonic devices, and for device engineers who need additional background on the underlying physical principles. This updated and revised second edition reflects advances in semicondutor technologies over the past decade, including many new semiconductor devices that have emerged and entered into the marketplace. It is suitable for graduate students in electrical engineering, materials science, physics, and chemical engineering, and as a general reference for processing and device engineers working in the semicondi...

Physics for Scientists and Engineers with Modern Physics

CERN Document Server

Fishbane, Paul M; Thornton, Stephen T

2005-01-01

This text is designed for a calculus-based physics course at the beginning university and college level. It is written with the expectation that students have either taken or are currently taking a beginning course in calculus. Students taking a physics course based on this book should leave with a solid conceptual understanding of the fundamental physical laws and how these laws can be applied to solve many problems. The key word for this edition is "understanding." The third edition of this text remains rigorous while including a number of new pedagogical elements which emphasize conceptual understanding.

The Physics of Proteins An Introduction to Biological Physics and Molecular Biophysics

CERN Document Server

Frauenfelder, Hans; Chan, Winnie S

2010-01-01

Physics and the life sciences have established new connections within the past few decades, resulting in biological physics as an established subfield with strong groups working in many physics departments. These interactions between physics and biology form a two-way street with physics providing new tools and concepts for understanding life, while biological systems can yield new insights into the physics of complex systems. To address the challenges of this interdisciplinary area, The Physics of Proteins: An Introduction to Biological Physics and Molecular Biophysics is divided into three interconnected sections. In Parts I and II, early chapters introduce the terminology and describe the main biological systems that physicists will encounter. Similarities between biomolecules, glasses, and solids are stressed with an emphasis on the fundamental concepts of living systems. The central section (Parts III and IV) delves into the dynamics of complex systems. A main theme is the realization that biological sys...

International Conference on Quantum Mathematical Physics : a Bridge between Mathematics and Physics

CERN Document Server

Kleiner, Johannes; Röken, Christian; Tolksdorf, Jürgen

2016-01-01

Quantum physics has been highly successful for more than 90 years. Nevertheless, a rigorous construction of interacting quantum field theory is still missing. Moreover, it is still unclear how to combine quantum physics and general relativity in a unified physical theory. Attacking these challenging problems of contemporary physics requires highly advanced mathematical methods as well as radically new physical concepts. This book presents different physical ideas and mathematical approaches in this direction. It contains a carefully selected cross-section of lectures which took place in autumn 2014 at the sixth conference ``Quantum Mathematical Physics - A Bridge between Mathematics and Physics'' in Regensburg, Germany. In the tradition of the other proceedings covering this series of conferences, a special feature of this book is the exposition of a wide variety of approaches, with the intention to facilitate a comparison. The book is mainly addressed to mathematicians and physicists who are interested in fu...

Physics for Mathematicians

Science.gov (United States)

Ulam, S. M.

2014-11-01

When I was asked to give a talk here, being just a mathematician among the distinguished array of physicists invited to speak, I had great hesitation. Then it occurred to me, if Viki Weisskopf can conduct a symphony orchestra, maybe I can talk about physics. I felt consoled until yesterday evening when I discovered that he is a professional, and so I feel very, hesitant again. My title, "Physics for Mathematicians", will almost mean physics without mathematics. My interest is really to paraphrase a famous statement, not what mathematics can do for physics, but what physics can do for mathematics. That is the underlying motive...

Cardiovascular risk profile: Cross-sectional analysis of motivational determinants, physical fitness and physical activity

Directory of Open Access Journals (Sweden)

Kiers Henri

2010-10-01

Full Text Available Abstract Background Cardiovascular risk factors are associated with physical fitness and, to a lesser extent, physical activity. Lifestyle interventions directed at enhancing physical fitness in order to decrease the risk of cardiovascular diseases should be extended. To enable the development of effective lifestyle interventions for people with cardiovascular risk factors, we investigated motivational, social-cognitive determinants derived from the Theory of Planned Behavior (TPB and other relevant social psychological theories, next to physical activity and physical fitness. Methods In the cross-sectional Utrecht Police Lifestyle Intervention Fitness and Training (UP-LIFT study, 1298 employees (aged 18 to 62 were asked to complete online questionnaires regarding social-cognitive variables and physical activity. Cardiovascular risk factors and physical fitness (peak VO2 were measured. Results For people with one or more cardiovascular risk factors (78.7% of the total population, social-cognitive variables accounted for 39% (p In addition to the prediction of intention to engage in physical activity and physical active behavior, we explored the impact of the intensity of physical activity. The intentsity of physical activity was only significantly related to physical active behavior (beta = .253, p 2 = .06, p 2 = .23, p For people with one or more cardiovascular risk factors, 39.9% had positive intentions to engage in physical activity and were also physically active, and 10.5% had a low intentions but were physically active. 37.7% had low intentions and were physically inactive, and about 11.9% had high intentions but were physically inactive. Conclusions This study contributes to our ability to optimize cardiovascular risk profiles by demonstrating an important association between physical fitness and social-cognitive variables. Physical fitness can be predicted by physical active behavior as well as by self-efficacy and the intensity of

Theoretical physics division

International Nuclear Information System (INIS)

Anon.

The studies in 1977 are reviewed. In theoretical nuclear physics: nuclear structure, nuclear reactions, intermediate energy physics; in elementary particle physics: field theory, strong interactions dynamics, nucleon-nucleon interactions, new particles, current algebra, symmetries and quarks are studied [fr

Physics research 1980

International Nuclear Information System (INIS)

1980-01-01

Research programmes at Oxford University are given for the year 1980 of the Clarendon Laboratory, Nuclear Physics Laboratory, Theoretical Physics Department and the Atmospheric Physics Department, together with provisional research programmes in Astrophysics, Metallurgy and the Science of Materials, and Archaeology and the History of Art. Items of interest to physicists are also included from Engineering Science, Geology and Mineralogy, Laboratory of Molecular Biophysics, Physical Chemistry Laboratory and the Chemical Crystallography Laboratory. (U.K.)

University physics

CERN Document Server

Arfken, George

1984-01-01

University Physics provides an authoritative treatment of physics. This book discusses the linear motion with constant acceleration; addition and subtraction of vectors; uniform circular motion and simple harmonic motion; and electrostatic energy of a charged capacitor. The behavior of materials in a non-uniform magnetic field; application of Kirchhoff's junction rule; Lorentz transformations; and Bernoulli's equation are also deliberated. This text likewise covers the speed of electromagnetic waves; origins of quantum physics; neutron activation analysis; and interference of light. This publi

Ultrasonic physics

CERN Document Server

Richardson, E G

1962-01-01

Ultrasonic Physics, Second Edition, provides an introduction to the fundamental principles of ultrasonic physics. The book opens with a discussion of the sources of ultrasound. This is followed by separate chapters on the properties and detection of ultrasonic radiation; measurement of propagation constants, i.e., the velocity and absorption, of ultrasound; ultrasound propagation in gases, liquids, and solids; and ultrasound propagation in aerosols, suspensions, and emulsions. The final chapter covers miscellaneous physical and physico-chemical actions, including dispersion and coagulation of

Physics in microelectronics and microelectronics in physics

International Nuclear Information System (INIS)

Mooser, E.

1983-01-01

Modern semiconductor technology and its many different facets such as micro-electronics, optoelectronics, integrated optics, solar energy conversion, etc... have their origin in solid state physics. However, because of their enormous economic impact, their development has been so rapid and has lead to such a high degree of complexity and sophistication, that to the newcomer in the field, the links between solid state electronics and solid state physics are no longer evident. The processes involved in the production of integrated circuits and solid state lasers afford very instructive examples on which to demostrate the impact of physics on semiconductor technology. Processes discussed include: Purification of silicon; Crystal growth; Liquid and vapour phase epitaxy; Photo- and electronbeam lithography; Mask production; Wet and dry etching; Doping and metal deposition, etc... The inverse phenomenon, i.e. the impact of semiconductor technology on physics will be demonstrated on examples involving two-dimensional electron gases. Such gases can readily be obtained in 'synthetic' layer structures, produced by molecular beam epitaxy and in the depletion layers of field-effect transistors with MOS geometry. the examples discussed involve the multiple potential well laser and the 'von Klitzing experiment'. (Author) [pt

Studying the physical basis of global warming: thermal effects of the interaction between radiation and matter and greenhouse effect

Energy Technology Data Exchange (ETDEWEB)

Besson, Ugo; De Ambrosis, Anna; Mascheretti, Paolo [Department of Physics ' A Volta' , University of Pavia, Via A Bassi 6, 27100 Pavia (Italy)], E-mail: ugo.besson@unipv.it, E-mail: anna.deambrosisvigna@unipv.it

2010-03-15

We present a teaching module dealing with the thermal effects of interaction between radiation and matter, the infrared emission of bodies and the greenhouse effect devoted to university level and teacher education. The module stresses the dependence of the optical properties of materials (transparency, absorptivity and emissivity) on radiation frequency, as a result of interaction between matter and radiation. Multiple experiences are suggested to favour a progressive construction of knowledge on the physical aspects necessary to understand the greenhouse effect and global warming. Some results obtained with university students are briefly reported.

Studying the physical basis of global warming: thermal effects of the interaction between radiation and matter and greenhouse effect

International Nuclear Information System (INIS)

Besson, Ugo; De Ambrosis, Anna; Mascheretti, Paolo

2010-01-01

We present a teaching module dealing with the thermal effects of interaction between radiation and matter, the infrared emission of bodies and the greenhouse effect devoted to university level and teacher education. The module stresses the dependence of the optical properties of materials (transparency, absorptivity and emissivity) on radiation frequency, as a result of interaction between matter and radiation. Multiple experiences are suggested to favour a progressive construction of knowledge on the physical aspects necessary to understand the greenhouse effect and global warming. Some results obtained with university students are briefly reported.

Waste Feed Evaporation Physical Properties Modeling

International Nuclear Information System (INIS)

Daniel, W.E.

2003-01-01

This document describes the waste feed evaporator modeling work done in the Waste Feed Evaporation and Physical Properties Modeling test specification and in support of the Hanford River Protection Project (RPP) Waste Treatment Plant (WTP) project. A private database (ZEOLITE) was developed and used in this work in order to include the behavior of aluminosilicates such a NAS-gel in the OLI/ESP simulations, in addition to the development of the mathematical models. Mathematical models were developed that describe certain physical properties in the Hanford RPP-WTP waste feed evaporator process (FEP). In particular, models were developed for the feed stream to the first ultra-filtration step characterizing its heat capacity, thermal conductivity, and viscosity, as well as the density of the evaporator contents. The scope of the task was expanded to include the volume reduction factor across the waste feed evaporator (total evaporator feed volume/evaporator bottoms volume). All the physical properties were modeled as functions of the waste feed composition, temperature, and the high level waste recycle volumetric flow rate relative to that of the waste feed. The goal for the mathematical models was to predict the physical property to predicted simulation value. The simulation model approximating the FEP process used to develop the correlations was relatively complex, and not possible to duplicate within the scope of the bench scale evaporation experiments. Therefore, simulants were made of 13 design points (a subset of the points used in the model fits) using the compositions of the ultra-filtration feed streams as predicted by the simulation model. The chemistry and physical properties of the supernate (the modeled stream) as predicted by the simulation were compared with the analytical results of experimental simulant work as a method of validating the simulation software

Physics of far-from-equilibrium systems and self-organization

International Nuclear Information System (INIS)

Nicolis, G.

1993-01-01

The status of self-organization phenomena from the stand point of the physical sciences are analyzed. Non linear dynamics and the presence of constraints maintaining the system far from equilibrium are shown to be the basic mechanism involved in the emergence of these phenomena. Some particularly representative experiments are first presented: thermal conversion, chemical reactions (Benard problem), biological systems, and their explanation through order, disorder, non-linearity, irreversibility, stability, bifurcation, symmetry breaking, etc., concepts. Then it is shown how the self-organization paradigm allows to model problems outside the traditional realm of the physical sciences. 29 figs., 27 refs

Proceedings of international conference dedicated to the seventieth anniversary of Physical-technical institute, SPA 'Physics-Sun' 'Fundamental and applied problems of physics'

International Nuclear Information System (INIS)

Lutpullaev, S.L.; Atabaev, I.G.; Abdurakhmanov, A.A.

2013-11-01

The International conference dedicated to the seventieth anniversary of Physical-technical institute, SPA 'Physics-Sun' 'Fundamental and applied problems of physics' was held on 14-15 November, 2013 in Tashkent, Uzbekistan. Specialists discussed various aspects of modern problems of relativistic nuclear physics and physics of atomic nuclei, solid state physics, various applications of new materials. More than 225 talks were presented in the meeting. (k.m.)

National Physics Conference. Paper Abstracts

International Nuclear Information System (INIS)

Marinela Dumitriu, Editorial Coordination.

1995-01-01

This book contains the abstracts of the proceedings of the annual Romanian Physics Conference organized by Romanian Physics Society. The conference was held on November 30 to December 2, 1995 in the city of Baia Mare. It was organized in the following nine sections: 1 - Astrophysics, Particle Physics, Nuclear Physics, Molecular and Atomic Physics; 2 - Plasma Physics; 3 - Biophysics; 4 - Technical Physics; 5 - Theoretical Physics; 6 -The Physics of Energy; 7 - The Physics of Environment 8 - Solid State Physics; 9 - Optical and Quantum Electronics. The full texts can be obtained on request from the Romanian Physical Society or directly from authors

Physics analysis tools for beauty physics in ATLAS

International Nuclear Information System (INIS)

Anastopoulos, C; Bouhova-Thacker, E; Catmore, J; Mora, L de; Dallison, S; Derue, F; Epp, B; Jussel, P; Kaczmarska, A; Radziewski, H v; Stahl, T; Reznicek, P

2008-01-01

The Large Hadron Collider experiments will search for physics phenomena beyond the Standard Model. Highly sensitive tests of beauty hadrons will represent an alternative approach to this research. The analysis of complex decay chains of the beauty hadrons have to efficiently extract the detector tracks made by these reactions and reject other events in order to make sufficiently precise measurement. This places severe demands on the software used to analyze the B-physics data. The ATLAS B-physics group has written a series of tools and algorithms for performing these tasks, to be run within the ATLAS offline software framework Athena. This paper describes this analysis suite, paying particular attention to mechanisms for handling combinatorics, interfaces to secondary vertex fitting packages, B-flavor tagging tools and finally Monte Carlo true information association to pursue simulation data in process of the software validations which is an important part of the development of the physics analysis tools

Break for Physical Activity: Incorporating Classroom-Based Physical Activity Breaks into Preschools

Science.gov (United States)

Wadsworth, Danielle D.; Robinson, Leah E.; Beckham, Karen; Webster, Kip

2012-01-01

Engaging in moderate-to-vigorous physical activity is essential to lifelong health and wellness. Physical activity behaviors established in early childhood relate to physical activity behaviors in later years. However, research has shown that children are adopting more sedentary behaviors. Incorporating structured and planned physical activity…

Physical Activity, Physical Performance, and Biological Markers of Health among Sedentary Older Latinos

Directory of Open Access Journals (Sweden)

Gerardo Moreno

2014-01-01

Full Text Available Background. Physical activity is associated with better physical health, possibly by changing biological markers of health such as waist circumference and inflammation, but these relationships are unclear and even less understood among older Latinos—a group with high rates of sedentary lifestyle. Methods. Participants were 120 sedentary older Latino adults from senior centers. Community-partnered research methods were used to recruit participants. Inflammatory (C-reactive protein and metabolic markers of health (waist circumference, HDL-cholesterol, triglycerides, insulin, and glucose, physical activity (Yale physical activity survey, and physical performance (short physical performance NIA battery were measured at baseline and 6-month followup. Results. Eighty percent of the sample was female. In final adjusted cross-sectional models, better physical activity indices were associated with faster gait speed (P<0.05. In adjusted longitudinal analyses, change in self-reported physical activity level correlated inversely with change in CRP (β=-0.05; P=0.03 and change in waist circumference (β=-0.16; P=0.02. Biological markers of health did not mediate the relationship between physical activity and physical performance. Conclusion. In this community-partnered study, higher physical activity was associated with better physical performance in cross-sectional analyses. In longitudinal analysis, increased physical activity was associated with improvements in some metabolic and inflammatory markers of health.

Physical Activity Predicts Higher Physical Function in Older Adults: The Osteoarthritis Initiative.

Science.gov (United States)

Batsis, John A; Germain, Cassandra M; Vásquez, Elizabeth; Zbehlik, Alicia J; Bartels, Stephen J

2016-01-01

Physical activity reduces mobility impairments in elders. We examined the association of physical activity on risk of subjective and objective physical function in adults with and at risk for osteoarthritis (OA). Adults aged ≥ 60 years from the longitudinal Osteoarthritis Initiative, a prospective observational study of knee OA, were classified by sex-specific quartiles of Physical Activity Score for the Elderly scores. Using linear mixed models, we assessed 6-year data on self-reported health, gait speed, Late-Life Function and Disability Index (LLFDI) and chair stand. Of 2252 subjects, mean age ranged from 66 to 70 years. Within each quartile, physical component (PCS) of the Short Form-12 and gait speed decreased from baseline to follow-up in both sexes (all P physical activity is associated with maintained physical function and is mediated by muscle strength, highlighting the importance of encouraging physical activity in older adults with and at risk for OA.

Harvard Project Physics Newsletter 10. The Project Physics Course, Text.

Science.gov (United States)

Harvard Univ., Cambridge, MA. Harvard Project Physics.

A short description of the availability of Harvard Project Physics course components is given as is a discussion of the growth of the use of Project Physics in schools, including some enrollment data and survey results. Locations of the 1970 and 1971 Summer Institutes are listed. Adaptations of Project Physics course outside the United States are…

Principles & practice of physics

CERN Document Server

Mazur, Eric; Dourmashkin, Peter A; Pedigo, Daryl; Bieniek, Ronald J

2015-01-01

Putting physics first Based on his storied research and teaching, Eric Mazur's Principles & Practice of Physics builds an understanding of physics that is both thorough and accessible. Unique organization and pedagogy allow you to develop a true conceptual understanding of physics alongside the quantitative skills needed in the course. *New learning architecture: The book is structured to help you learn physics in an organized way that encourages comprehension and reduces distraction.*Physics on a contemporary foundation: Traditional texts delay the introduction of ideas that we now see as unifying and foundational. This text builds physics on those unifying foundations, helping you to develop an understanding that is stronger, deeper, and fundamentally simpler.*Research-based instruction: This text uses a range of research-based instructional techniques to teach physics in the most effective manner possible. The result is a groundbreaking book that puts physics first, thereby making it more accessible to...

Modern atomic physics

CERN Document Server

Natarajan, Vasant

2015-01-01

Much of our understanding of physics in the last 30-plus years has come from research on atoms, photons, and their interactions. Collecting information previously scattered throughout the literature, Modern Atomic Physics provides students with one unified guide to contemporary developments in the field. After reviewing metrology and preliminary material, the text explains core areas of atomic physics. Important topics discussed include the spontaneous emission of radiation, stimulated transitions and the properties of gas, the physics and applications of resonance fluorescence, coherence, cooling and trapping of charged and neutral particles, and atomic beam magnetic resonance experiments. Covering standards, a different way of looking at a photon, stimulated radiation, and frequency combs, the appendices avoid jargon and use historical notes and personal anecdotes to make the topics accessible to non-atomic physics students. Written by a leader in atomic and optical physics, this text gives a state-of-the...

Thermal physics of transition edge sensor arrays

International Nuclear Information System (INIS)

Hoevers, H.F.C.

2006-01-01

Thermal transport in transition edge sensor (TES)-based microcalorimeter arrays is reviewed. The fundamentals of thermal conductance in Si 3 N 4 membranes are discussed and the magnitude of the electron-phonon coupling and Kapitza coupling in practical devices is summarized. Next, the thermal transport in high-stopping power and low-heat capacity absorbers, required for arrays of TES microcalorimeters, is discussed in combination with a performance analysis of detectors with mushroom-absorbers. Finally, the phenomenology of unexplained excess noise, observed in both Mo- and Ti-based TESs, is briefly summarized and related with the coupling of the TES to the heat bath

Metallographic techniques for evaluation of Thermal Barrier Coatings produced by Electron Beam Physical Vapor Deposition

International Nuclear Information System (INIS)

Kelly, Matthew; Singh, Jogender; Todd, Judith; Copley, Steven; Wolfe, Douglas

2008-01-01

Thermal Barrier Coatings (TBC) produced by Electron Beam Physical Vapor Deposition (EB-PVD) are primarily applied to critical hot section turbine components. EB-PVD TBC for turbine applications exhibit a complicated structure of porous ceramic columns separated by voids that offers mechanical compliance. Currently there are no standard evaluation methods for evaluating EB-PVD TBC structure quantitatively. This paper proposes a metallographic method for preparing samples and evaluating techniques to quantitatively measure structure. TBC samples were produced and evaluated with the proposed metallographic technique and digital image analysis for columnar grain size and relative intercolumnar porosity. Incorporation of the proposed evaluation technique will increase knowledge of the relation between processing parameters and material properties by incorporating a structural link. Application of this evaluation method will directly benefit areas of quality control, microstructural model development, and reduced development time for process scaling

Medication and physical activity and physical fitness in severe mental illness.

Science.gov (United States)

Perez-Cruzado, David; Cuesta-Vargas, Antonio; Vera-Garcia, Elisa; Mayoral-Cleries, Fermín

2018-05-23

Anti-psychotic medication has emerged as the primary medical treatment for people with severe mental illness, despite the great risks involved in the use of this medication. In addition, this population suffers from problems of obesity, sedentary lifestyle and poor physical fitness, which is aggravated by the use of this type of medication. The objective of this study is to explore the influence of the most commonly used antipsychotics in this population (Olanzapine and Risperidone) on physical activity and the physical fitness of people with severe mental illness. Sixty-two people between 26 and 61 years of age with severe mental illness were assessed. All participants were evaluated with a battery of 11 physical tests to assess their physical fitness and with the IPAQ-short version questionnaire to determine their level of physical activity. The doses of Risperidone and Olanzapine were also evaluated in all participants. Significant differences were found for physical activity, with higher levels reported in those patients with severe mental illness who did not take any of these medications. Regarding physical fitness, significant differences were only found for the consumption of Risperidone, with better physical fitness levels seen in patients who did not consume this medication; on the other hand, for the consumption of Olanzapine, differences were found in muscular strength, balance and aerobic condition with better values in non-Olanzapine consumers compared with Olanzapine consumers. Copyright © 2018 Elsevier B.V. All rights reserved.

Relations of didactics of physics and projects of education in physics

Science.gov (United States)

Zelenický, Ľubomír; Rakovská, Mária

2017-01-01

Deepening interest in didactical problems of teaching physics can be from the beginning associated with the creation of the subject of physics, especially at secondary schools. In the 20th century it was no longer possible to ignore the rapid development of physical science and application of its results in practice. The subject of physics required the definition of its content, development of textbooks and, amongst others, new ways of teaching in comparison with the past. The interest of teachers focused mainly on increasing the clarity of explanation - the creation of experiments and teaching aids. Since 1926 Association of Mathematicians and Physicists in the first Czechoslovak Republic issued a didactic-methodological annex to the Journal of Mathematics and Physics, as a discussion in order to increase the quality of teaching. However, this action was spontaneous and subjective. In the second half of the 20th century didactics of physics became a study discipline, part of the training of future secondary school teachers and the development of scientific work in the field of Theory of teaching physics started.

Physics Teachers Programme or how to bring modern physics to school

CERN Multimedia

2002-01-01

A new programme for teachers took place last weekend at CERN. Fifty high school teachers sacrificed their weekend and plunged into CERN physics to find new inspirations for exciting physics lessons.   The fifty participants in the Physics Teachers programme in the Microcosm garden. High school students are often convinced that physics is a boring and useless subject, and physics teachers have a hard time presenting interesting lessons. To help them, CERN has inaugurated the Physics Teachers Programme, whose goal is to present CERN and its activities, so that teachers can get an idea of what kind of physics research is going on at the frontier of science. 'Our philosophy is to show them today what they will read in textbooks of the future', says Antonella Del Rosso, responsible for this course, 'so that they can inspire their pupils'. This programme can be considered the younger brother of the High School Teachers Programme, since it has a similar aim, but instead of being three-weeks long, it las...

4th ATLAS Physics Workshop (Athens) - Report from the Physics Sessions

CERN Multimedia

Kersevan, B P

The 4th ATLAS Physics Workshop provided a showcase for studies of some of the most exciting aspects of LHC physics, both within the Standard Model and beyond. It was clear from the wide range of topics covered, from QCD studies to TeV-scale Black Hole production, that preparations are well in hand for understanding whatever Nature, and the LHC, may throw at us. The Standard Model session concentrated on QCD and Electroweak physics, which will form the core of the ATLAS physics program during the first years of LHC operation. Convenor Matt Dobbs began by summarising recent and ongoing studies and pointed out that the first ATLAS papers will aim to prove that we understand LHC physics in the regime where the Standard Model is reliable. Only then will we be able to make convincing claims for the existence of New Physics. Subsequent talks discussed our understanding of this 'bread-and-butter' physics, including minimum bias processes and underlying events (Arthur Moraes), Parton Distribution Functions (Jon Butte...

The physics of music and the music of physics 2015

CERN Multimedia

Heron, Matilda

2015-01-01

The physics of music and the music of physics 2015 at the Montreux Jazz festival 2015. ‘The physics of music’ demonstration by Robert Kieffer from the CERN Beam Instrumentation Group and Gaëtan Parsihian of the Laboratoire de Mécanique et d’Acoustique, CNRS, Marseille. The 'music of physics' by Juliana Cherston from the Massachusetts Institute of Technology Media Lab, Domenico Vicinanza of the GÉANT Association and Anglia Ruskin University in Cambridge, UK, and Ewan Hill of the University of Victoria, TRIUMF and the ATLAS experiment at CERN. Duet with sonified live collisions by jazz pianist Al Blatter.

New Approach to Analyzing Physics Problems: A Taxonomy of Introductory Physics Problems

Science.gov (United States)

Teodorescu, Raluca E.; Bennhold, Cornelius; Feldman, Gerald; Medsker, Larry

2013-01-01

This paper describes research on a classification of physics problems in the context of introductory physics courses. This classification, called the Taxonomy of Introductory Physics Problems (TIPP), relates physics problems to the cognitive processes required to solve them. TIPP was created in order to design educational objectives, to develop…

International Thermonuclear Experimental Reactor: Physics issues, capabilities and physics program plans

International Nuclear Information System (INIS)

Wesley, J.C.

1997-01-01

Present status and understanding of the principal plasma-performance determining physics issues that affect the physics design and operational capabilities of the International Thermonuclear Experimental Reactor (ITER) [ITER EDA Agreement and Protocol 2 (International Atomic Energy Agency, Vienna, 1994)] are presented. Emphasis is placed on the five major physics-basis issues emdash energy confinement, beta limit, density limit, impurity dilution and radiation loss, and the feasibility of obtaining partial-detached divertor operation emdash that directly affect projections of ITER fusion power and burn duration performance. A summary of these projections is presented and the effect of uncertainties in the physics-basis issues is examined. ITER capabilities for experimental flexibility and plasma-performance optimization are also described, and how these capabilities may enter into the ITER physics program plan is discussed. copyright 1997 American Institute of Physics

Rock Physics

DEFF Research Database (Denmark)

Fabricius, Ida Lykke

2017-01-01

Rock physics is the discipline linking petrophysical properties as derived from borehole data to surface based geophysical exploration data. It can involve interpretation of both elastic wave propagation and electrical conductivity, but in this chapter focus is on elasticity. Rock physics is based...... on continuum mechanics, and the theory of elasticity developed for statics becomes the key to petrophysical interpretation of velocity of elastic waves. In practice, rock physics involves interpretation of well logs including vertical seismic profiling (VSP) and analysis of core samples. The results...

Recasting particle physics by entangling physics, history and philosophy

International Nuclear Information System (INIS)

Bertozzi, Eugenio; Levrini, Olivia

2015-01-01

The paper presents the design process we followed to recast particle physics so as to make it conceptually relevant for secondary school students. In this design process, the concept of symmetry was assumed as core-idea because of its structural and foundational role in particle physics, its crosscutting character and its epistemological and philosophical value. The first draft of the materials was tested in a pilot-study which involved 19 students of a regular class (grade 13) of an Italian school. The data analysis showed that the students were in their 'regime of competence' for grasping subtle nuances of the materials and for providing important hints for revising them. In particular, students’ reactions brought into light the need of clarifying the 'foundational' character that symmetry attained in twentieth-century physics. The delicate step of re-thinking the materials required the researchers to articulate the complex relationship between researches on physics teaching, history and philosophy of physics. This analytic phase resulted in a version of the materials which implies the students to be guided to grasp the meaning of symmetry as normative principle in twentieth-century physics, throughout the exploration of the different meanings assumed by symmetry over time. The whole process led also to the production of an essential, on-line version, of the materials targeted to a wider audience.

Large facilities in physics

International Nuclear Information System (INIS)

Jacob, M.; Schopper, H.

1995-01-01

The papers presented at this conference dealt with the following topics: particle physics, computing and data transmission, nuclear and atomic physics and their new facets, condensed matter physics, fusion and plasma physics, astrophysics and astroparticle physics. The proceedings include the review talks, a report on the OECD Megascience Forum and summaries of the round-table discussions. figs., tabs., refs

Structure-preserving geometric algorithms for plasma physics and beam physics

Science.gov (United States)

Qin, Hong

2017-10-01

Standard algorithms in the plasma physics and beam physics do not possess the long-term accuracy and fidelity required in the study of multi-scale dynamics, because they do not preserve the geometric structures of the physical systems, such as the local energy-momentum conservation, symplectic structure and gauge symmetry. As a result, numerical errors accumulate coherently with time and long-term simulation results are not reliable. To overcome this difficulty, since 2008 structure-preserving geometric algorithms have been developed. This new generation of algorithms utilizes advanced techniques, such as interpolating differential forms, canonical and non-canonical symplectic integrators, and finite element exterior calculus to guarantee gauge symmetry and charge conservation, and the conservation of energy-momentum and symplectic structure. It is our vision that future numerical capabilities in plasma physics and beam physics will be based on the structure-preserving geometric algorithms.

Fast reactor physics - an overview

International Nuclear Information System (INIS)

Lee, S.M.

2004-01-01

An introduction to the basic features of fast neutron reactors is made, highlighting the differences from the more conventional thermal neutron reactors. A discussion of important feedback reactivity mechanisms is given. Then an overview is presented of the methods of fast reactor physics, which play an important role in the successful design and operation of fast reactors. The methods are based on three main elements, namely (i) nuclear data bases, (ii) numerical methods and computer codes, and (iii) critical experiments. These elements are reviewed and the present status and future trends are summarized. (author)

Differences in the Processes of Solving Physics Problems between Good Physics Problem Solvers and Poor Physics Problem Solvers.

Science.gov (United States)

Finegold, M.; Mass, R.

1985-01-01

Good problem solvers and poor problem solvers in advanced physics (N=8) were significantly different in their ability in translating, planning, and physical reasoning, as well as in problem solving time; no differences in reliance on algebraic solutions and checking problems were noted. Implications for physics teaching are discussed. (DH)

A EU simulation platform for nuclear reactor safety: multi-scale and multi-physics calculations, sensitivity and uncertainty analysis (NURESIM project)

International Nuclear Information System (INIS)

Chauliac, Christian; Bestion, Dominique; Crouzet, Nicolas; Aragones, Jose-Maria; Cacuci, Dan Gabriel; Weiss, Frank-Peter; Zimmermann, Martin A.

2010-01-01

The NURESIM project, the numerical simulation platform, is developed in the frame of the NURISP European Collaborative Project (FP7), which includes 22 organizations from 14 European countries. NURESIM intends to be a reference platform providing high quality software tools, physical models, generic functions and assessment results. The NURESIM platform provides an accurate representation of the physical phenomena by promoting and incorporating the latest advances in core physics, two-phase thermal-hydraulics and fuel modelling. It includes multi-scale and multi-physics features, especially for coupling core physics and thermal-hydraulics models for reactor safety. Easy coupling of the different codes and solvers is provided through the use of a common data structure and generic functions (e.g., for interpolation between non-conforming meshes). More generally, the platform includes generic pre-processing, post-processing and supervision functions through the open-source SALOME software, in order to make the codes more user-friendly. The platform also provides the informatics environment for testing and comparing different codes. The contribution summarizes the achievements and ongoing developments of the simulation platform in core physics, thermal-hydraulics, multi-physics, uncertainties and code integration

Atmospheric cloud physics laboratory project study

Science.gov (United States)

Schultz, W. E.; Stephen, L. A.; Usher, L. H.

1976-01-01

Engineering studies were performed for the Zero-G Cloud Physics Experiment liquid cooling and air pressure control systems. A total of four concepts for the liquid cooling system was evaluated, two of which were found to closely approach the systems requirements. Thermal insulation requirements, system hardware, and control sensor locations were established. The reservoir sizes and initial temperatures were defined as well as system power requirements. In the study of the pressure control system, fluid analyses by the Atmospheric Cloud Physics Laboratory were performed to determine flow characteristics of various orifice sizes, vacuum pump adequacy, and control systems performance. System parameters predicted in these analyses as a function of time include the following for various orifice sizes: (1) chamber and vacuum pump mass flow rates, (2) the number of valve openings or closures, (3) the maximum cloud chamber pressure deviation from the allowable, and (4) cloud chamber and accumulator pressure.

Urban physics

NARCIS (Netherlands)

Blocken, B.J.E.

2012-01-01

Urban Physics is the multiscale and interdisciplinary research area dealing with physical processes in urban environments that influence our everyday health, comfort and productivity. It involves disciplines ranging from mesoscale meteorology to human thermophysiology. The introductory lecture

Physics matters

CERN Document Server

Natarajan, Vasant

2017-01-01

This is a collection of essays on physics topics. It is written as a textbook for non-physics science and arts students, at the undergraduate level. Topics covered include cellphone radiation, lasers, the twin paradox, and more.

Summary of the progress of reactor physics in Japan reviewing the activities related to NEA Committee on Reactor Physics

International Nuclear Information System (INIS)

Hirota, Jitsuya

1984-09-01

The progress of fast and thermal reactor physics, fusion neutronics and shielding researches in these twenty years can be clearly recognized in the reviews of reactor physics activities in Japan which had been perpared by the Special Committee on Reactor Physics: the joint committee under Atomic Energy Society of Japan and JAERI. Many topics of those discussed at the NEACRP meetings concerned fast reactor physics. Information exchange on the topics such as adjustment of group cross sections by integral data, central worth discrepancy, sodium void effect and heterogeneous core stimulated the researches in Japan. And achievements in Japan including those in the JAERI Fast Critical Facility FCA were reported and contributed largely to the international co-operation. In addition, the contribution from Japan was also made concerning a study of fusion blanket. Among various specialists' meetings recommended by NEACRP, those on nuclear data and benchmarks for reactor shielding were often held since 1973 and helpful to the progress of shielding researches in Japan. The Third Specialists' Meeting on Reactor Noise (SMORN-III) was held in Tokyo in 1981, indicating the recent progress in safety-related applications of reactor noise analysis. The NEACRP benchmark tests were quite useful to the progress of reactor physics in Japan, which included the benchmark calculations of BWR lattice cell, key parameters and burn-up characteristics of a large LMFBR, FBR and PWR shielding, and so on. It may be noted that the benchmark test on reactor noise analysis methods was successfully conducted by Japan in connection with SMORN-III. In addition, the co-operation was positively made to the compilation of light water lattice data, and the preparation of reviews on actinide production and burn-up, and blanket physics. (J.P.N.)

Radiation physics for medical physicists

CERN Document Server

Podgorsak, Ervin B

2016-01-01

This textbook summarizes the basic knowledge of atomic, nuclear, and radiation physics that professionals working in medical physics and biomedical engineering need for efficient and safe use of ionizing radiation in medicine. Concentrating on the underlying principles of radiation physics, the textbook covers the prerequisite knowledge for medical physics courses on the graduate and post-graduate levels in radiotherapy physics, radiation dosimetry, imaging physics, and health physics, thus providing the link between elementary undergraduate physics and the intricacies of four medical physics specialties: diagnostic radiology physics, nuclear medicine physics, radiation oncology physics, and health physics. To recognize the importance of radiation dosimetry to medical physics three new chapters have been added to the 14 chapters of the previous edition. Chapter 15 provides a general introduction to radiation dosimetry. Chapter 16 deals with absolute radiation dosimetry systems that establish absorbed dose or ...

Aspects of students' self-evaluation of their physical condition and motivation for physical activity

OpenAIRE

Avižonienė, Genovaitė; Gylienė, Rasa

2002-01-01

The main objective of the study is to establish how the students evaluate their physical condition and get involved into physical activity; make a research of physical status and physical capacity of the students; establish how adequate is a subjective self evaluation of physical condition and in what way it influences motivation for physical training and physical activity. The survey has showed that the results of majority of the students' physical condition are low, though 86,2% of the stud...

A Physics Course for Non-Physical Science Teachers

Science.gov (United States)

Cottle, Paul D.

1997-11-01

A two semester introductory physics sequence exclusively for undergraduates and graduate students in science education who were not seeking certification in physics was taught at Florida State for the first time in 1996-97. The course emphasized building understanding in both qualitative and quantitative aspects of physics through group learning approaches to laboratories and written problem assignments, assessments which required detailed written explanations, and frequent interactions between the instructor and individual students. This talk will briefly outline the structure of the course and some of the more interesting observations made by the group of science education graduate students and faculty who evaluated aspects of the course.

Can Programmed or Self-Selected Physical Activity Affect Physical Fitness of Adolescents?

Directory of Open Access Journals (Sweden)

Neto Cláudio F.

2014-12-01

Full Text Available The aim of this study was to verify the effects of programmed and self-selected physical activities on the physical fitness of adolescents. High school adolescents, aged between 15 and 17 years, were divided into two experimental groups: a a self-selected physical activity group (PAS with 55 students (aged 15.7 ± 0.7 years, who performed physical activities with self-selected rhythm at the following sports: basketball, volleyball, handball, futsal and swimming; and b a physical fitness training group (PFT with 53 students (aged 16.0 ± 0.7 years, who performed programmed physical fitness exercises. Both types of activity were developed during 60 min classes. To assess physical fitness the PROESP-BR protocol was used. The statistical analysis was performed by repeated measures ANOVA. The measurements of pre and post-tests showed significantly different values after PFT in: 9 minute running test, medicine ball throw, horizontal jump, abdominal endurance, running speed and flexibility. After PAS differences were detected in abdominal endurance, agility, running speed and flexibility. The intervention with programmed physical activity promoted more changes in the physical abilities; however, in the self-selected program, agility was improved probably because of the practice of sports. Therefore, physical education teachers can use PFT to improve cardiorespiratory fitness and power of lower and upper limbs and PAS to improve agility of high school adolescents.

Can programmed or self-selected physical activity affect physical fitness of adolescents?

Science.gov (United States)

Neto, Cláudio F; Neto, Gabriel R; Araújo, Adenilson T; Sousa, Maria S C; Sousa, Juliana B C; Batista, Gilmário R; Reis, Victor M M R

2014-09-29

The aim of this study was to verify the effects of programmed and self-selected physical activities on the physical fitness of adolescents. High school adolescents, aged between 15 and 17 years, were divided into two experimental groups: a) a self-selected physical activity group (PAS) with 55 students (aged 15.7 ± 0.7 years), who performed physical activities with self-selected rhythm at the following sports: basketball, volleyball, handball, futsal and swimming; and b) a physical fitness training group (PFT) with 53 students (aged 16.0 ± 0.7 years), who performed programmed physical fitness exercises. Both types of activity were developed during 60 min classes. To assess physical fitness the PROESP-BR protocol was used. The statistical analysis was performed by repeated measures ANOVA. The measurements of pre and post-tests showed significantly different values after PFT in: 9 minute running test, medicine ball throw, horizontal jump, abdominal endurance, running speed and flexibility. After PAS differences were detected in abdominal endurance, agility, running speed and flexibility. The intervention with programmed physical activity promoted more changes in the physical abilities; however, in the self-selected program, agility was improved probably because of the practice of sports. Therefore, physical education teachers can use PFT to improve cardiorespiratory fitness and power of lower and upper limbs and PAS to improve agility of high school adolescents.

Physical properties of encapsulate spent fuel in canisters

International Nuclear Information System (INIS)

1999-01-01

Spent fuel and high-level wastes will be permanently stored in a deep geological repository (AGP). Prior to this, they will be encapsulated in canisters. The present report is dedicated to the study of such canisters under the different physical demands that they may undergo, be those in operating or accident conditions. The physical demands of interest include mechanical demands, both static and dynamic, and thermal demands. Consideration is given to the complete file of the canister, from the time when it is empty and without lid to the final conditions expected in the repository. Thermal analyses of canisters containing spent fuel are often carried out in two dimensions, some times with hypotheses of axial symmetry and some times using a plane transverse section through the centre of the canister. The results obtained in both types of analyses are compared here to those of complete three-dimensional analyses. The latter generate more reliable information about the temperatures that may be experienced by the canister and its contents; they also allow calibrating the errors embodied in the two-dimensional calculations. (Author)

Physics in Brazil in the next decade: condensed matter physics

International Nuclear Information System (INIS)

1990-01-01

This book gives a general overview of the present situation in Brazil, concerning research in the different areas of condensed matter physics. The main areas discussed here are: semiconductors, magnetism and magnetic materials, superconductivity liquid crystals and polymers, ceramics, glasses and crystals, statistical physics and solid state physics, crystallography, magnetic resonance and Moessbauer spectroscopy, among others. (A.C.A.S.)

Value orientation towards physical education and physical activity ...

African Journals Online (AJOL)

The purpose of this study was to examine the value orientation towards physical education among secondary school students in Hong Kong. After surveying 2748 students it was found that male students had stronger value orientation towards physical education than female students. It was also found that as the students ...

Advanced Level Physics Students' Conceptions of Quantum Physics.

Science.gov (United States)

Mashhadi, Azam

This study addresses questions about particle physics that focus on the nature of electrons. Speculations as to whether they are more like particles or waves or like neither illustrate the difficulties with which students are confronted when trying to incorporate the concepts of quantum physics into their overall conceptual framework. Such…

Physical activity and physical self-concept in youth: systematic review and meta-analysis.

Science.gov (United States)

Babic, Mark J; Morgan, Philip J; Plotnikoff, Ronald C; Lonsdale, Chris; White, Rhiannon L; Lubans, David R

2014-11-01

Evidence suggests that physical self-concept is associated with physical activity in children and adolescents, but no systematic review of this literature has been conducted. The primary aim of this systematic review and meta-analysis was to determine the strength of associations between physical activity and physical self-concept (general and sub-domains) in children and adolescents. The secondary aim was to examine potential moderators of the association between physical activity and physical self-concept. A systematic search of six electronic databases (MEDLINE, CINAHL, SPORTDiscus, ERIC, Web of Science and Scopus) with no date restrictions was conducted. Random effects meta-analyses with correction for measurement were employed. The associations between physical activity and general physical self-concept and sub-domains were explored. A risk of bias assessment was conducted by two reviewers. The search identified 64 studies to be included in the meta-analysis. Thirty-three studies addressed multiple outcomes of general physical self-concept: 28 studies examined general physical self-concept, 59 examined perceived competence, 25 examined perceived fitness, and 55 examined perceived appearance. Perceived competence was most strongly associated with physical activity (r = 0.30, 95% CI 0.24-0.35, p self-concept (r = 0.25, 95% CI 0.16-0.34, p self-concept (p self-concept and its various sub-domains in children and adolescents. Age and sex are key moderators of the association between physical activity and physical self-concept.

Engineering physics

CERN Document Server

Mukherji, Uma

2015-01-01

ENGINEERING PHYSICS is designed as a textbook for first year engineering students of a two semester course in Applied Physics according to new revised syllabus. However the scope of this book is not only limited to undergraduate engineering students and science students, it can also serve as a reference book for practicing scientists.Advanced technological topics like LCD, Squid, Maglev system, Electron microscopes, MRI, Photonics - Photonic fibre, Nano-particles, CNT, Quantum computing etc., are explained with basic underlying principles of Physics.This text explained following topics with numerous solved, unsolved problems and questions from different angles. Part-I contains crystal structure, Liquid crystal, Thermo-electric effect, Thermionic emission, Ultrasonic, Acoustics, semiconductor and magnetic materials. Whereas Part-2 contains Optics, X-rays, Electron optics, Dielectric materials, Quantum Physics and Schrodinger wave equation, Laser, Fibre-optics and Holography, Radio-activity, Super-conductivity,...

Factory physics

CERN Document Server

Hopp, Wallace J.

2011-01-01

After a brief introductory chapter, "Factory Physics 3/e" is divided into three parts: I - The Lessons of History; II - Factory Physics; and III - Principles in Practice. The scientific approach to manufacturing and supply chain management, developed in Part II, is unique to this text. No other text or professional book provides a rigorous, principles-based foundation for manufacturing management. The Third Edition offers tighter connections between Lean Manufacturing, MRP/ERP, Six Sigma, Supply Chain Management, and Factory Physics. In addition to enhancing the historical overview of how these systems evolved, the authors show explicitly how users can achieve Lean Manufacturing objectives (faster response, less inventory) using the integration aspects of MRP/ERP/SCM systems along with the variance analysis methods of Six Sigma. Factory Physics provides the overarching framework that coordinates all of these initiatives into a single-focused strategy.

Physical Therapy (For Parents)

Science.gov (United States)

... Staying Safe Videos for Educators Search English Español Physical Therapy KidsHealth / For Parents / Physical Therapy Print en español Terapia física Physical Therapy Basics Doctors often recommend physical therapy (PT) ...

Probabilities in physics

CERN Document Server

Hartmann, Stephan

2011-01-01

Many results of modern physics--those of quantum mechanics, for instance--come in a probabilistic guise. But what do probabilistic statements in physics mean? Are probabilities matters of objective fact and part of the furniture of the world, as objectivists think? Or do they only express ignorance or belief, as Bayesians suggest? And how are probabilistic hypotheses justified and supported by empirical evidence? Finally, what does the probabilistic nature of physics imply for our understanding of the world? This volume is the first to provide a philosophical appraisal of probabilities in all of physics. Its main aim is to make sense of probabilistic statements as they occur in the various physical theories and models and to provide a plausible epistemology and metaphysics of probabilities. The essays collected here consider statistical physics, probabilistic modelling, and quantum mechanics, and critically assess the merits and disadvantages of objectivist and subjectivist views of probabilities in these fie...

Experimental atomic physics

International Nuclear Information System (INIS)

Anon.

1985-01-01

The experimental atomic physics program within the physics division is carried out by two groups, whose reports are given in this section. Work of the accelerator atomic physics group is centered around the 6.5-MV EN tandem accelerator; consequently, most of its research is concerned with atomic processes occurring to, or initiated by, few MeV/amu heavy ions. Other activities of this group include higher energy experiments at the Holifield Heavy Ion Research Facility (HHIRF), studies of electron and positron channeling radiation, and collaborative experiments at other institutions. The second experimental group concerns itself with lower energy atomic collision physics in support of the Fusion Energy Program. During the past year, the new Electron Cyclotron Resonance Source has been completed and some of the first data from this facility is presented. In addition to these two activities in experimental atomic physics, other chapters of this report describe progress in theoretical atomic physics, experimental plasma diagnostic development, and atomic data center compilation activities

New neutron physics using spallation sources

International Nuclear Information System (INIS)

Bowman, C.D.

1988-01-01

The extraordinary neutron intensities available from the new spallation pulsed neutron sources open up exciting opportunities for basic and applied research in neutron nuclear physics. The energy range of neutron research which is being explored with these sources extends from thermal energies to almost 800 MeV. The emphasis here is on prospective experiments below 100 keV neutron energy using the intense neutron bursts produced by the Proton Storage Ring (PSR) at Los Alamos. 30 refs., 10 figs

The physics and technology of Si and Ge detectors

International Nuclear Information System (INIS)

Stab, Lucien

Semiconductor physics fundamentals are recalled (energy levels in crystalline solids, level population, charge carrier transport) as an introduction to studying NP junction at thermal equilibrium, or reversly biased. The fabrication of semiconductor detectors including surface barrier detectors, implanted junctions, and lithium-drifted semiconductors is discussed [fr

Plasma physics

CERN Document Server

Drummond, James E

1961-01-01

A historic snapshot of the field of plasma physics, this fifty-year-old volume offers an edited collection of papers by pioneering experts in the field. In addition to assisting students in their understanding of the foundations of classical plasma physics, it provides a source of historic context for modern physicists. Highly successful upon its initial publication, this book was the standard text on plasma physics throughout the 1960s and 70s.Hailed by Science magazine as a ""well executed venture,"" the three-part treatment ranges from basic plasma theory to magnetohydrodynamics and microwa

Computational physics

Energy Technology Data Exchange (ETDEWEB)

Anon.

1987-01-15

Computers have for many years played a vital role in the acquisition and treatment of experimental data, but they have more recently taken up a much more extended role in physics research. The numerical and algebraic calculations now performed on modern computers make it possible to explore consequences of basic theories in a way which goes beyond the limits of both analytic insight and experimental investigation. This was brought out clearly at the Conference on Perspectives in Computational Physics, held at the International Centre for Theoretical Physics, Trieste, Italy, from 29-31 October.

Atomic physics

CERN Document Server

Foot, Christopher J

2007-01-01

This text will thoroughly update the existing literature on atomic physics. Intended to accompany an advanced undergraduate course in atomic physics, the book will lead the students up to the latest advances and the applications to Bose-Einstein Condensation of atoms, matter-wave inter-ferometry and quantum computing with trapped ions. The elementary atomic physics covered in the early chapters should be accessible to undergraduates when they are first introduced to the subject. To complement. the usual quantum mechanical treatment of atomic structure the book strongly emphasizes the experimen

Interpreting Physics

CERN Document Server

MacKinnon, Edward

2012-01-01

This book is the first to offer a systematic account of the role of language in the development and interpretation of physics. An historical-conceptual analysis of the co-evolution of mathematical and physical concepts leads to the classical/quatum interface. Bohrian orthodoxy stresses the indispensability of classical concepts and the functional role of mathematics. This book analyses ways of extending, and then going beyond this orthodoxy orthodoxy. Finally, the book analyzes how a revised interpretation of physics impacts on basic philosophical issues: conceptual revolutions, realism, and r

Computational physics

International Nuclear Information System (INIS)

Anon.

1987-01-01

Computers have for many years played a vital role in the acquisition and treatment of experimental data, but they have more recently taken up a much more extended role in physics research. The numerical and algebraic calculations now performed on modern computers make it possible to explore consequences of basic theories in a way which goes beyond the limits of both analytic insight and experimental investigation. This was brought out clearly at the Conference on Perspectives in Computational Physics, held at the International Centre for Theoretical Physics, Trieste, Italy, from 29-31 October

Laser physics

CERN Document Server

Milonni, Peter W

2010-01-01

Create physically realistic 3D Graphics environments with this introduction to the ideas and techniques behind the process. Author David H. Eberly includes simulations to introduce the key problems involved and then gradually reveals the mathematical and physical concepts needed to solve them. He then describes all the algorithmic foundations and uses code examples and working source code to show how they are implemented, culminating in a large collection of physical simulations. The book tackles the complex, challenging issues that other books avoid, including Lagrangian dynamics, rigid body

Reactor physics

International Nuclear Information System (INIS)

Ait Abderrahim, H.

1998-01-01

Progress in research on reactor physics in 1997 at the Belgian Nuclear Research Centre SCK/CEN is described. Activities in the following four domains are discussed: core physics, ex-core neutron transport, experiments in Materials Testing Reactors, international benchmarks

Thermo-Physical Properties of Kenaf-Filled Acrylonitrile Butadiene Styrene Composites

Directory of Open Access Journals (Sweden)

Nikmatin Siti

2017-01-01

Full Text Available Studies on advantageous of natural fillers incorporated into polymer composites on thermo-physical and mechanical properties are still intensively investigated. Several evidences suggest that the natural fillers with small contents combined with polymer increase their composite properties. We thus investigate thermo-physical properties of kenaf-filled acrylonitrile butadiene styrene (ABS composites. ABS with 5% kenaf microparticle size (ABS/K5, ABS with 5% kenaf short fiber (ABS/KSF5, and recycled ABS with 5% kenaf microparticle size (RABS/K5 were manufactured. Granular composites were manufactured by the twin screw extruder. Composite properties in terms of X-ray diffractions, surface morphologies, and thermal behaviors were investigated. The present work found that ABS/KSF5 has the highest degree of crystallinity compared to others. No significant difference was found in terms of thermal properties of the composites.

Longitudinal changes in physical self-perceptions and associations with physical activity during adolescence.

Science.gov (United States)

Inchley, Jo; Kirby, Jo; Currie, Candace

2011-05-01

The purpose of this study was to examine adolescents' physical self-perceptions and their associations with physical activity using a longitudinal perspective. Utilizing data from the Physical Activity in Scottish Schoolchildren (PASS) study, changes in exercise self-efficacy, perceived competence, global self-esteem and physical self-worth were assessed among a sample of 641 Scottish adolescents from age 11-15 years. Girls reported lower levels of perceived competence, self-esteem and physical self-worth than boys at each age. Furthermore, girls' physical self-perceptions decreased markedly over time. Among boys, only perceived competence decreased, while global self-esteem increased. Baseline physical activity was a significant predictor of later activity levels for both genders. Findings demonstrate the importance of physical self-perceptions in relation to physical activity behavior among adolescents. Among older boys, high perceived competence increased the odds of being active by 3.8 times. Among older girls, high exercise self-efficacy increased the odds of being active by 5.2 times. There is a need for early interventions which promote increased physical literacy and confidence, particularly among girls.

When physics is not "just physics": complexity science invites new measurement frames for exploring the physics of cognitive and biological development.

Science.gov (United States)

Kelty-Stephen, Damian; Dixon, James A

2012-01-01

The neurobiological sciences have struggled to resolve the physical foundations for biological and cognitive phenomena with a suspicion that biological and cognitive systems, capable of exhibiting and contributing to structure within themselves and through their contexts, are fundamentally distinct or autonomous from purely physical systems. Complexity science offers new physics-based approaches to explaining biological and cognitive phenomena. In response to controversy over whether complexity science might seek to "explain away" biology and cognition as "just physics," we propose that complexity science serves as an application of recent advances in physics to phenomena in biology and cognition without reducing or undermining the integrity of the phenomena to be explained. We highlight that physics is, like the neurobiological sciences, an evolving field and that the threat of reduction is overstated. We propose that distinctions between biological and cognitive systems from physical systems are pretheoretical and thus optional. We review our own work applying insights from post-classical physics regarding turbulence and fractal fluctuations to the problems of developing cognitive structure. Far from hoping to reduce biology and cognition to "nothing but" physics, we present our view that complexity science offers new explanatory frameworks for considering physical foundations of biological and cognitive phenomena.

Optimizing the Role of Physical Education in Promoting Physical Activity: A Social-Ecological Approach.

Science.gov (United States)

Solmon, Melinda A

2015-01-01

The benefits associated with being physically active are well documented, but a significant proportion of the population is insufficiently active. Physical inactivity is a major health risk factor in our society, and physical education programs are consistently identified as a means to address this concern. The purpose of this article is to use the social-ecological model as a framework to examine ways in which physical education programs can play an important role in promoting physical activity. Policies that require time allocations and resources for physical education and physical activity in schools and community designs that provide infrastructure that makes being physically active accessible and convenient are important factors in making schools and communities healthier spaces. It is clear, however, that policies alone are not sufficient to address concerns about physical inactivity. We must consider individual factors that influence decisions to be physically active in efforts to engage children in physical education programs that promote active lifestyles. The learning climate that teachers create determines what students do and learn in physical education classes. Ensuring that students see value in the content presented and structuring classes so that students believe they can experience success when they exert effort are key elements in an effective motivational climate. Efforts to address public health concerns about physical inactivity require a comprehensive approach including quality physical education. It is critical that kinesiology professionals emerge as leaders in these efforts to place physical education programs at the center of promoting children's physical activity.

Contemporary plasma physics

International Nuclear Information System (INIS)

Sodha, M.S.; Tewari, D.P.; Subbarao, D.

1983-01-01

The book consists of review articles on some selected contemporary aspects of plasma physics. The selected topics present a panoramic view of contemporary plasma physics and applications to fusion, space and MHD power generation. Basic non-linear plasma theory is also covered. The book is supposed to be useful for M.S./M.Sc. students specialising in plasma physics and for those beginning research work in plasma physics. It will also serve as a valuable reference book for more advanced research workers. (M.G.B.)

Pubertal development, physical self-perception, and motivation toward physical activity in girls.

Science.gov (United States)

Labbrozzi, Dina; Robazza, Claudio; Bertollo, Maurizio; Bucci, Ines; Bortoli, Laura

2013-08-01

We examined the differences in physical self-perception and motivation toward physical activity in early- and mid-adolescent girls. Body Mass Index (BMI) and pubertal status, assessed by means of the Tanner scale, were collected in 11-year-old (n=74) and 13-year-old girls (n=60). The assessment included six scales from the Physical Self-Description Questionnaire, the Physical Activity Enjoyment Scale, and the Situational Intrinsic Motivation Scale. Age differences emerged, with older girls showing a poorer physical perception and lower scores in intrinsic motivation and enjoyment of physical activity. In the subsample of 11-year-olds, findings showed that more developed girls reported a poorer physical perception on the scales of body fat, global physical self-concept, and appearance, and a lower score in the PACES positive scale. Results underscore the need to promote interventions aimed at encouraging active lifestyles among children and adolescent girls, in order to prevent overweight prior to pubertal onset. Copyright © 2013 The Foundation for Professionals in Services for Adolescents. Published by Elsevier Ltd. All rights reserved.

Reactor Physics Training

International Nuclear Information System (INIS)

Baeten, P.

2007-01-01

University courses in nuclear reactor physics at the universities consist of a theoretical description of the physics and technology of nuclear reactors. In order to demonstrate the basic concepts in reactor physics, training exercises in nuclear reactor installations are also desirable. Since the number of reactor facilities is however strongly decreasing in Europe, it becomes difficult to offer to students a means for demonstrating the basic concepts in reactor physics by performing training exercises in nuclear installations. Universities do not generally possess the capabilities for performing training exercises. Therefore, SCK-CEN offers universities the possibility to perform (on a commercial basis) training exercises at its infrastructure consisting of two research reactors (BR1 and VENUS). Besides the organisation of training exercises in the framework of university courses, SCK-CEN also organizes theoretical courses in reactor physics for the education and training of nuclear reactor operators. It is indeed a very important subject to guarantee the safe operation of present and future nuclear reactors. In this framework, an understanding of the fundamental principles of nuclear reactor physics is also necessary for reactor operators. Therefore, the organisation of a basic Nuclear reactor physics course at the level of reactor operators in the initial and continuous training of reactor operators has proven to be indispensable. In most countries, such training also results from the direct request from the safety authorities to assure the high level of competence of the staff in nuclear reactors. The objectives this activity are: (1) to provide training and education activities in reactor physics for university students and (2) to organise courses in nuclear reactor physics for reactor operators

Advances in chemical Physics

CERN Document Server

Rice, Stuart A

2011-01-01

The Advances in Chemical Physics series-the cutting edge of research in chemical physics The Advances in Chemical Physics series provides the chemical physics and physical chemistry fields with a forum for critical, authoritative evaluations of advances in every area of the discipline. Filled with cutting-edge research reported in a cohesive manner not found elsewhere in the literature, each volume of the Advances in Chemical Physics series offers contributions from internationally renowned chemists and serves as the perfect supplement to any advanced graduate class devoted to the study of che

Advances in chemical physics

CERN Document Server

Rice, Stuart A

2012-01-01

The Advances in Chemical Physics series-the cutting edge of research in chemical physics The Advances in Chemical Physics series provides the chemical physics field with a forum for critical, authoritative evaluations of advances in every area of the discipline. Filled with cutting-edge research reported in a cohesive manner not found elsewhere in the literature, each volume of the Advances in Chemical Physics series serves as the perfect supplement to any advanced graduate class devoted to the study of chemical physics. This volume explores: Quantum Dynamical Resonances in Ch

Advances in chemical physics

CERN Document Server

Rice, Stuart A

2011-01-01

The Advances in Chemical Physics series-the cutting edge of research in chemical physics The Advances in Chemical Physics series provides the chemical physics and physical chemistry fields with a forum for critical, authoritative evaluations of advances in every area of the discipline. Filled with cutting-edge research reported in a cohesive manner not found elsewhere in the literature, each volume of the Advances in Chemical Physics series offers contributions from internationally renowned chemists and serves as the perfect supplement to any advanced graduate class devoted to the study of che

Phase relations, crystal structures and physical properties of nuclear fuels

International Nuclear Information System (INIS)

Tagawa, Hiroaki; Fujino, Takeo; Tateno, Jun

1975-07-01

Phase relations, crystal structures and physical properties of the compounds for nuclear fuels are presented, including melting point, thermal expansion, diffusion and magnetic and electric properties. Emphasis is on oxides, carbides and nitrides of thorium, uranium and plutonium. (auth.)

PhysicsTeachers@CERN2005

CERN Multimedia

Maximilien Brice

2005-01-01

PhysicsTeachers@CERN is a three day conference for high school teachers. It is a great opportunity to meet colleagues from other countries and keep up-to-date with today's physics. The conference is designed to provide a valuable experience for high school physics teachers and give them new insights into contemporary particle physics. The conference is open to physics teachers from all CERN member states.

Nuclear physics at Peking University

International Nuclear Information System (INIS)

Wang, Ruo Peng

2009-01-01

Full text: The teaching program of nuclear physics at Peking University started in 1955, in answer to the demand of China's nuclear program. In 1958, the Department of Atomic Energy was founded. The name of this department was changed to the Department of Technique Physics in 1961. Graduates in nuclear physics and technical physics had great contribution in China's nuclear program. The nuclear physics specialty from the Department of Technique Physics merged into the School of Physics in 2001. At present, nuclear physics is not any more a major for undergraduate students in the school of physics, but there are Master programs and Ph. D programs in nuclear physics, nuclear techniques and heavy ion physics. About 200 new students are admitted each year in the School of Physics at Peking University. About 20 graduates from the School of Physics work or continue to study in nuclear physics and related fields each year. (author)